diff options
Diffstat (limited to 'arch/arm/mach-at91')
46 files changed, 671 insertions, 1657 deletions
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 6cc6f7aebdae..0e6d548b70d9 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -12,6 +12,9 @@ config HAVE_AT91_DBGU0 config HAVE_AT91_DBGU1 bool +config HAVE_AT91_DBGU2 + bool + config AT91_USE_OLD_CLK bool @@ -28,36 +31,33 @@ config OLD_CLK_AT91 bool default AT91_PMC_UNIT && AT91_USE_OLD_CLK -config AT91_SAM9_ALT_RESET +config OLD_IRQ_AT91 bool - default !ARCH_AT91X40 - -config AT91_SAM9G45_RESET - bool - default !ARCH_AT91X40 + select MULTI_IRQ_HANDLER + select SPARSE_IRQ -config AT91_SAM9_TIME +config HAVE_AT91_SMD bool -config HAVE_AT91_SMD +config HAVE_AT91_H32MX bool config SOC_AT91SAM9 bool - select AT91_SAM9_TIME + select ATMEL_AIC_IRQ if !OLD_IRQ_AT91 select CPU_ARM926T select GENERIC_CLOCKEVENTS - select MULTI_IRQ_HANDLER - select SPARSE_IRQ + select MEMORY if USE_OF + select ATMEL_SDRAMC if USE_OF config SOC_SAMA5 bool - select AT91_SAM9_TIME + select ATMEL_AIC5_IRQ select CPU_V7 select GENERIC_CLOCKEVENTS - select MULTI_IRQ_HANDLER - select SPARSE_IRQ select USE_OF + select MEMORY + select ATMEL_SDRAMC menu "Atmel AT91 System-on-Chip" @@ -70,8 +70,7 @@ config ARCH_AT91X40 depends on !MMU select CPU_ARM7TDMI select ARCH_USES_GETTIMEOFFSET - select MULTI_IRQ_HANDLER - select SPARSE_IRQ + select OLD_IRQ_AT91 help Select this if you are using one of Atmel's AT91X40 SoC. @@ -103,16 +102,30 @@ config SOC_SAMA5D3 help Select this if you are using one of Atmel's SAMA5D3 family SoC. This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36. + +config SOC_SAMA5D4 + bool "SAMA5D4 family" + select SOC_SAMA5 + select HAVE_AT91_DBGU2 + select CLKSRC_MMIO + select CACHE_L2X0 + select CACHE_PL310 + select HAVE_FB_ATMEL + select HAVE_AT91_UTMI + select HAVE_AT91_SMD + select HAVE_AT91_USB_CLK + select HAVE_AT91_H32MX + help + Select this if you are using one of Atmel's SAMA5D4 family SoC. endif if SOC_SAM_V4_V5 config SOC_AT91RM9200 bool "AT91RM9200" + select ATMEL_AIC_IRQ if !OLD_IRQ_AT91 select CPU_ARM920T select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 - select MULTI_IRQ_HANDLER - select SPARSE_IRQ select HAVE_AT91_USB_CLK config SOC_AT91SAM9260 diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt index 44ace320d2e1..d8e88219edb4 100644 --- a/arch/arm/mach-at91/Kconfig.non_dt +++ b/arch/arm/mach-at91/Kconfig.non_dt @@ -14,31 +14,37 @@ config ARCH_AT91RM9200 bool "AT91RM9200" select SOC_AT91RM9200 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9260 bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20" select SOC_AT91SAM9260 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9261 bool "AT91SAM9261 or AT91SAM9G10" select SOC_AT91SAM9261 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9263 bool "AT91SAM9263" select SOC_AT91SAM9263 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9RL bool "AT91SAM9RL" select SOC_AT91SAM9RL select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9G45 bool "AT91SAM9G45" select SOC_AT91SAM9G45 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 endchoice @@ -132,12 +138,6 @@ config MACH_ECO920 bool "eco920" help Select this if you are using the eco920 board - -config MACH_RSI_EWS - bool "RSI Embedded Webserver" - depends on ARCH_AT91RM9200 - help - Select this if you are using RSIs EWS board. endif # ---------------------------------------------------------- @@ -212,12 +212,6 @@ config MACH_CPU9G20 Select this if you are using a Eukrea Electromatique's CPU9G20 Board <http://www.eukrea.com/> -config MACH_ACMENETUSFOXG20 - bool "Acme Systems srl FOX Board G20" - help - Select this if you are using Acme Systems - FOX Board G20 <http://www.acmesystems.it> - config MACH_PORTUXG20 bool "taskit PortuxG20" help diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 78e9cec282f4..ac99d87ffefe 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -2,15 +2,13 @@ # Makefile for the linux kernel. # -obj-y := irq.o gpio.o setup.o sysirq_mask.o +obj-y := gpio.o setup.o sysirq_mask.o obj-m := obj-n := obj- := +obj-$(CONFIG_OLD_IRQ_AT91) += irq.o obj-$(CONFIG_OLD_CLK_AT91) += clock.o -obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o -obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o -obj-$(CONFIG_AT91_SAM9_TIME) += at91sam926x_time.o obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o # CPU-specific support @@ -23,6 +21,7 @@ obj-$(CONFIG_SOC_AT91SAM9N12) += at91sam9n12.o obj-$(CONFIG_SOC_AT91SAM9X5) += at91sam9x5.o obj-$(CONFIG_SOC_AT91SAM9RL) += at91sam9rl.o obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o +obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o @@ -46,7 +45,6 @@ obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o obj-$(CONFIG_MACH_ECO920) += board-eco920.o -obj-$(CONFIG_MACH_RSI_EWS) += board-rsi-ews.o # AT91SAM9260 board-specific support obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o @@ -69,7 +67,6 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o # AT91SAM9G20 board-specific support obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o -obj-$(CONFIG_MACH_ACMENETUSFOXG20) += board-foxg20.o obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o diff --git a/arch/arm/mach-at91/at91_rstc.h b/arch/arm/mach-at91/at91_rstc.h deleted file mode 100644 index a600e6992920..000000000000 --- a/arch/arm/mach-at91/at91_rstc.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_rstc.h - * - * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 Atmel Corporation. - * - * Reset Controller (RSTC) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_RSTC_H -#define AT91_RSTC_H - -#ifndef __ASSEMBLY__ -extern void __iomem *at91_rstc_base; - -#define at91_rstc_read(field) \ - __raw_readl(at91_rstc_base + field) - -#define at91_rstc_write(field, value) \ - __raw_writel(value, at91_rstc_base + field) -#else -.extern at91_rstc_base -#endif - -#define AT91_RSTC_CR 0x00 /* Reset Controller Control Register */ -#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */ -#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */ -#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */ -#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */ - -#define AT91_RSTC_SR 0x04 /* Reset Controller Status Register */ -#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */ -#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */ -#define AT91_RSTC_RSTTYP_GENERAL (0 << 8) -#define AT91_RSTC_RSTTYP_WAKEUP (1 << 8) -#define AT91_RSTC_RSTTYP_WATCHDOG (2 << 8) -#define AT91_RSTC_RSTTYP_SOFTWARE (3 << 8) -#define AT91_RSTC_RSTTYP_USER (4 << 8) -#define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */ -#define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */ - -#define AT91_RSTC_MR 0x08 /* Reset Controller Mode Register */ -#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */ -#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */ -#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */ - -#endif diff --git a/arch/arm/mach-at91/at91_shdwc.h b/arch/arm/mach-at91/at91_shdwc.h deleted file mode 100644 index 9e29f31ec9a6..000000000000 --- a/arch/arm/mach-at91/at91_shdwc.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_shdwc.h - * - * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 Atmel Corporation. - * - * Shutdown Controller (SHDWC) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_SHDWC_H -#define AT91_SHDWC_H - -#ifndef __ASSEMBLY__ -extern void __iomem *at91_shdwc_base; - -#define at91_shdwc_read(field) \ - __raw_readl(at91_shdwc_base + field) - -#define at91_shdwc_write(field, value) \ - __raw_writel(value, at91_shdwc_base + field) -#endif - -#define AT91_SHDW_CR 0x00 /* Shut Down Control Register */ -#define AT91_SHDW_SHDW (1 << 0) /* Shut Down command */ -#define AT91_SHDW_KEY (0xa5 << 24) /* KEY Password */ - -#define AT91_SHDW_MR 0x04 /* Shut Down Mode Register */ -#define AT91_SHDW_WKMODE0 (3 << 0) /* Wake-up 0 Mode Selection */ -#define AT91_SHDW_WKMODE0_NONE 0 -#define AT91_SHDW_WKMODE0_HIGH 1 -#define AT91_SHDW_WKMODE0_LOW 2 -#define AT91_SHDW_WKMODE0_ANYLEVEL 3 -#define AT91_SHDW_CPTWK0_MAX 0xf /* Maximum Counter On Wake Up 0 */ -#define AT91_SHDW_CPTWK0 (AT91_SHDW_CPTWK0_MAX << 4) /* Counter On Wake Up 0 */ -#define AT91_SHDW_CPTWK0_(x) ((x) << 4) -#define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */ -#define AT91_SHDW_RTCWKEN (1 << 17) /* Real Time Clock Wake-up Enable */ - -#define AT91_SHDW_SR 0x08 /* Shut Down Status Register */ -#define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */ -#define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */ -#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */ - -#endif diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 3477ba94c4c5..aab1f969a7c3 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -11,6 +11,7 @@ */ #include <linux/module.h> +#include <linux/platform_device.h> #include <linux/clk/at91_pmc.h> #include <asm/proc-fns.h> @@ -24,7 +25,6 @@ #include <mach/hardware.h> #include "at91_aic.h" -#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "sam9_smc.h" @@ -342,8 +342,6 @@ static void __init at91sam9260_map_io(void) static void __init at91sam9260_ioremap_registers(void) { - at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC); - at91_ioremap_rstc(AT91SAM9260_BASE_RSTC); at91_ioremap_ramc(0, AT91SAM9260_BASE_SDRAMC, 512); at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC); @@ -354,7 +352,6 @@ static void __init at91sam9260_ioremap_registers(void) static void __init at91sam9260_initialize(void) { arm_pm_idle = at91sam9_idle; - arm_pm_restart = at91sam9_alt_restart; at91_sysirq_mask_rtt(AT91SAM9260_BASE_RTT); @@ -362,6 +359,45 @@ static void __init at91sam9260_initialize(void) at91_gpio_init(at91sam9260_gpio, 3); } +static struct resource rstc_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_RSTC, + .end = AT91SAM9260_BASE_RSTC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_BASE_SDRAMC, + .end = AT91SAM9260_BASE_SDRAMC + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rstc_device = { + .name = "at91-sam9260-reset", + .resource = rstc_resources, + .num_resources = ARRAY_SIZE(rstc_resources), +}; + +static struct resource shdwc_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_SHDWC, + .end = AT91SAM9260_BASE_SHDWC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device shdwc_device = { + .name = "at91-poweroff", + .resource = shdwc_resources, + .num_resources = ARRAY_SIZE(shdwc_resources), +}; + +static void __init at91sam9260_register_devices(void) +{ + platform_device_register(&rstc_device); + platform_device_register(&shdwc_device); +} + /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ @@ -404,6 +440,11 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; +static void __init at91sam9260_init_time(void) +{ + at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); +} + AT91_SOC_START(at91sam9260) .map_io = at91sam9260_map_io, .default_irq_priority = at91sam9260_default_irq_priority, @@ -411,5 +452,7 @@ AT91_SOC_START(at91sam9260) | (1 << AT91SAM9260_ID_IRQ2), .ioremap_registers = at91sam9260_ioremap_registers, .register_clocks = at91sam9260_register_clocks, + .register_devices = at91sam9260_register_devices, .init = at91sam9260_initialize, + .init_time = at91sam9260_init_time, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index fb164a5d04a9..a8bd35963332 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -11,6 +11,7 @@ */ #include <linux/module.h> +#include <linux/platform_device.h> #include <linux/clk/at91_pmc.h> #include <asm/proc-fns.h> @@ -23,7 +24,6 @@ #include <mach/hardware.h> #include "at91_aic.h" -#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "sam9_smc.h" @@ -301,8 +301,6 @@ static void __init at91sam9261_map_io(void) static void __init at91sam9261_ioremap_registers(void) { - at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC); - at91_ioremap_rstc(AT91SAM9261_BASE_RSTC); at91_ioremap_ramc(0, AT91SAM9261_BASE_SDRAMC, 512); at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC); @@ -313,7 +311,6 @@ static void __init at91sam9261_ioremap_registers(void) static void __init at91sam9261_initialize(void) { arm_pm_idle = at91sam9_idle; - arm_pm_restart = at91sam9_alt_restart; at91_sysirq_mask_rtt(AT91SAM9261_BASE_RTT); @@ -321,6 +318,45 @@ static void __init at91sam9261_initialize(void) at91_gpio_init(at91sam9261_gpio, 3); } +static struct resource rstc_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_RSTC, + .end = AT91SAM9261_BASE_RSTC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_BASE_SDRAMC, + .end = AT91SAM9261_BASE_SDRAMC + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rstc_device = { + .name = "at91-sam9260-reset", + .resource = rstc_resources, + .num_resources = ARRAY_SIZE(rstc_resources), +}; + +static struct resource shdwc_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_SHDWC, + .end = AT91SAM9261_BASE_SHDWC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device shdwc_device = { + .name = "at91-poweroff", + .resource = shdwc_resources, + .num_resources = ARRAY_SIZE(shdwc_resources), +}; + +static void __init at91sam9261_register_devices(void) +{ + platform_device_register(&rstc_device); + platform_device_register(&shdwc_device); +} + /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ @@ -363,6 +399,11 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; +static void __init at91sam9261_init_time(void) +{ + at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); +} + AT91_SOC_START(at91sam9261) .map_io = at91sam9261_map_io, .default_irq_priority = at91sam9261_default_irq_priority, @@ -370,5 +411,7 @@ AT91_SOC_START(at91sam9261) | (1 << AT91SAM9261_ID_IRQ2), .ioremap_registers = at91sam9261_ioremap_registers, .register_clocks = at91sam9261_register_clocks, + .register_devices = at91sam9261_register_devices, .init = at91sam9261_initialize, + .init_time = at91sam9261_init_time, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 810fa5f15a51..fbff228cc63e 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -11,6 +11,7 @@ */ #include <linux/module.h> +#include <linux/platform_device.h> #include <linux/clk/at91_pmc.h> #include <asm/proc-fns.h> @@ -22,7 +23,6 @@ #include <mach/hardware.h> #include "at91_aic.h" -#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "sam9_smc.h" @@ -321,8 +321,6 @@ static void __init at91sam9263_map_io(void) static void __init at91sam9263_ioremap_registers(void) { - at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC); - at91_ioremap_rstc(AT91SAM9263_BASE_RSTC); at91_ioremap_ramc(0, AT91SAM9263_BASE_SDRAMC0, 512); at91_ioremap_ramc(1, AT91SAM9263_BASE_SDRAMC1, 512); at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT); @@ -335,7 +333,6 @@ static void __init at91sam9263_ioremap_registers(void) static void __init at91sam9263_initialize(void) { arm_pm_idle = at91sam9_idle; - arm_pm_restart = at91sam9_alt_restart; at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT0); at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT1); @@ -344,6 +341,45 @@ static void __init at91sam9263_initialize(void) at91_gpio_init(at91sam9263_gpio, 5); } +static struct resource rstc_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_RSTC, + .end = AT91SAM9263_BASE_RSTC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_BASE_SDRAMC0, + .end = AT91SAM9263_BASE_SDRAMC0 + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rstc_device = { + .name = "at91-sam9260-reset", + .resource = rstc_resources, + .num_resources = ARRAY_SIZE(rstc_resources), +}; + +static struct resource shdwc_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_SHDWC, + .end = AT91SAM9263_BASE_SHDWC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device shdwc_device = { + .name = "at91-poweroff", + .resource = shdwc_resources, + .num_resources = ARRAY_SIZE(shdwc_resources), +}; + +static void __init at91sam9263_register_devices(void) +{ + platform_device_register(&rstc_device); + platform_device_register(&shdwc_device); +} + /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ @@ -386,11 +422,18 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ1) */ }; +static void __init at91sam9263_init_time(void) +{ + at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); +} + AT91_SOC_START(at91sam9263) .map_io = at91sam9263_map_io, .default_irq_priority = at91sam9263_default_irq_priority, .extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1), .ioremap_registers = at91sam9263_ioremap_registers, .register_clocks = at91sam9263_register_clocks, + .register_devices = at91sam9263_register_devices, .init = at91sam9263_initialize, + .init_time = at91sam9263_init_time, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c deleted file mode 100644 index 0a9e2fc8f796..000000000000 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - * at91sam926x_time.c - Periodic Interval Timer (PIT) for at91sam926x - * - * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France - * Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France - * Converted to ClockSource/ClockEvents by David Brownell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/clockchips.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> - -#include <asm/mach/time.h> -#include <mach/hardware.h> - -#define AT91_PIT_MR 0x00 /* Mode Register */ -#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ -#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */ -#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */ - -#define AT91_PIT_SR 0x04 /* Status Register */ -#define AT91_PIT_PITS (1 << 0) /* Timer Status */ - -#define AT91_PIT_PIVR 0x08 /* Periodic Interval Value Register */ -#define AT91_PIT_PIIR 0x0c /* Periodic Interval Image Register */ -#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */ -#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */ - -#define PIT_CPIV(x) ((x) & AT91_PIT_CPIV) -#define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20) - -static u32 pit_cycle; /* write-once */ -static u32 pit_cnt; /* access only w/system irq blocked */ -static void __iomem *pit_base_addr __read_mostly; -static struct clk *mck; - -static inline unsigned int pit_read(unsigned int reg_offset) -{ - return __raw_readl(pit_base_addr + reg_offset); -} - -static inline void pit_write(unsigned int reg_offset, unsigned long value) -{ - __raw_writel(value, pit_base_addr + reg_offset); -} - -/* - * Clocksource: just a monotonic counter of MCK/16 cycles. - * We don't care whether or not PIT irqs are enabled. - */ -static cycle_t read_pit_clk(struct clocksource *cs) -{ - unsigned long flags; - u32 elapsed; - u32 t; - - raw_local_irq_save(flags); - elapsed = pit_cnt; - t = pit_read(AT91_PIT_PIIR); - raw_local_irq_restore(flags); - - elapsed += PIT_PICNT(t) * pit_cycle; - elapsed += PIT_CPIV(t); - return elapsed; -} - -static struct clocksource pit_clk = { - .name = "pit", - .rating = 175, - .read = read_pit_clk, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - - -/* - * Clockevent device: interrupts every 1/HZ (== pit_cycles * MCK/16) - */ -static void -pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) -{ - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - /* update clocksource counter */ - pit_cnt += pit_cycle * PIT_PICNT(pit_read(AT91_PIT_PIVR)); - pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN - | AT91_PIT_PITIEN); - break; - case CLOCK_EVT_MODE_ONESHOT: - BUG(); - /* FALLTHROUGH */ - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - /* disable irq, leaving the clocksource active */ - pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN); - break; - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static void at91sam926x_pit_suspend(struct clock_event_device *cedev) -{ - /* Disable timer */ - pit_write(AT91_PIT_MR, 0); -} - -static void at91sam926x_pit_reset(void) -{ - /* Disable timer and irqs */ - pit_write(AT91_PIT_MR, 0); - - /* Clear any pending interrupts, wait for PIT to stop counting */ - while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0) - cpu_relax(); - - /* Start PIT but don't enable IRQ */ - pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN); -} - -static void at91sam926x_pit_resume(struct clock_event_device *cedev) -{ - at91sam926x_pit_reset(); -} - -static struct clock_event_device pit_clkevt = { - .name = "pit", - .features = CLOCK_EVT_FEAT_PERIODIC, - .shift = 32, - .rating = 100, - .set_mode = pit_clkevt_mode, - .suspend = at91sam926x_pit_suspend, - .resume = at91sam926x_pit_resume, -}; - - -/* - * IRQ handler for the timer. - */ -static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id) -{ - /* - * irqs should be disabled here, but as the irq is shared they are only - * guaranteed to be off if the timer irq is registered first. - */ - WARN_ON_ONCE(!irqs_disabled()); - - /* The PIT interrupt may be disabled, and is shared */ - if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC) - && (pit_read(AT91_PIT_SR) & AT91_PIT_PITS)) { - unsigned nr_ticks; - - /* Get number of ticks performed before irq, and ack it */ - nr_ticks = PIT_PICNT(pit_read(AT91_PIT_PIVR)); - do { - pit_cnt += pit_cycle; - pit_clkevt.event_handler(&pit_clkevt); - nr_ticks--; - } while (nr_ticks); - - return IRQ_HANDLED; - } - - return IRQ_NONE; -} - -static struct irqaction at91sam926x_pit_irq = { - .name = "at91_tick", - .flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = at91sam926x_pit_interrupt, - .irq = NR_IRQS_LEGACY + AT91_ID_SYS, -}; - -#ifdef CONFIG_OF -static struct of_device_id pit_timer_ids[] = { - { .compatible = "atmel,at91sam9260-pit" }, - { /* sentinel */ } -}; - -static int __init of_at91sam926x_pit_init(void) -{ - struct device_node *np; - int ret; - - np = of_find_matching_node(NULL, pit_timer_ids); - if (!np) - goto err; - - pit_base_addr = of_iomap(np, 0); - if (!pit_base_addr) - goto node_err; - - mck = of_clk_get(np, 0); - - /* Get the interrupts property */ - ret = irq_of_parse_and_map(np, 0); - if (!ret) { - pr_crit("AT91: PIT: Unable to get IRQ from DT\n"); - if (!IS_ERR(mck)) - clk_put(mck); - goto ioremap_err; - } - at91sam926x_pit_irq.irq = ret; - - of_node_put(np); - - return 0; - -ioremap_err: - iounmap(pit_base_addr); -node_err: - of_node_put(np); -err: - return -EINVAL; -} -#else -static int __init of_at91sam926x_pit_init(void) -{ - return -EINVAL; -} -#endif - -/* - * Set up both clocksource and clockevent support. - */ -void __init at91sam926x_pit_init(void) -{ - unsigned long pit_rate; - unsigned bits; - int ret; - - mck = ERR_PTR(-ENOENT); - - /* For device tree enabled device: initialize here */ - of_at91sam926x_pit_init(); - - /* - * Use our actual MCK to figure out how many MCK/16 ticks per - * 1/HZ period (instead of a compile-time constant LATCH). - */ - if (IS_ERR(mck)) - mck = clk_get(NULL, "mck"); - - if (IS_ERR(mck)) - panic("AT91: PIT: Unable to get mck clk\n"); - pit_rate = clk_get_rate(mck) / 16; - pit_cycle = (pit_rate + HZ/2) / HZ; - WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0); - - /* Initialize and enable the timer */ - at91sam926x_pit_reset(); - - /* - * Register clocksource. The high order bits of PIV are unused, - * so this isn't a 32-bit counter unless we get clockevent irqs. - */ - bits = 12 /* PICNT */ + ilog2(pit_cycle) /* PIV */; - pit_clk.mask = CLOCKSOURCE_MASK(bits); - clocksource_register_hz(&pit_clk, pit_rate); - - /* Set up irq handler */ - ret = setup_irq(at91sam926x_pit_irq.irq, &at91sam926x_pit_irq); - if (ret) - pr_crit("AT91: PIT: Unable to setup IRQ\n"); - - /* Set up and register clockevents */ - pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift); - pit_clkevt.cpumask = cpumask_of(0); - clockevents_register_device(&pit_clkevt); -} - -void __init at91sam926x_ioremap_pit(u32 addr) -{ -#if defined(CONFIG_OF) - struct device_node *np = - of_find_matching_node(NULL, pit_timer_ids); - - if (np) { - of_node_put(np); - return; - } -#endif - pit_base_addr = ioremap(addr, 16); - - if (!pit_base_addr) - panic("Impossible to ioremap PIT\n"); -} diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S deleted file mode 100644 index f039538d3bdb..000000000000 --- a/arch/arm/mach-at91/at91sam9_alt_reset.S +++ /dev/null @@ -1,40 +0,0 @@ -/* - * reset AT91SAM9G20 as per errata - * - * (C) BitBox Ltd 2010 - * - * unless the SDRAM is cleanly shutdown before we hit the - * reset register it can be left driving the data bus and - * killing the chance of a subsequent boot from NAND - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/linkage.h> -#include <mach/hardware.h> -#include <mach/at91_ramc.h> -#include "at91_rstc.h" - - .arm - - .globl at91sam9_alt_restart - -at91sam9_alt_restart: ldr r0, =at91_ramc_base @ preload constants - ldr r0, [r0] - ldr r4, =at91_rstc_base - ldr r1, [r4] - - mov r2, #1 - mov r3, #AT91_SDRAMC_LPCB_POWER_DOWN - ldr r4, =AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST - - .balign 32 @ align to cache line - - str r2, [r0, #AT91_SDRAMC_TR] @ disable SDRAM access - str r3, [r0, #AT91_SDRAMC_LPR] @ power down SDRAM - str r4, [r1, #AT91_RSTC_CR] @ reset processor - - b . diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 9d45496e4932..405427ec05f8 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/dma-mapping.h> #include <linux/clk/at91_pmc.h> +#include <linux/platform_device.h> #include <asm/irq.h> #include <asm/mach/arch.h> @@ -371,8 +372,6 @@ static void __init at91sam9g45_map_io(void) static void __init at91sam9g45_ioremap_registers(void) { - at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC); - at91_ioremap_rstc(AT91SAM9G45_BASE_RSTC); at91_ioremap_ramc(0, AT91SAM9G45_BASE_DDRSDRC1, 512); at91_ioremap_ramc(1, AT91SAM9G45_BASE_DDRSDRC0, 512); at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT); @@ -384,7 +383,6 @@ static void __init at91sam9g45_ioremap_registers(void) static void __init at91sam9g45_initialize(void) { arm_pm_idle = at91sam9_idle; - arm_pm_restart = at91sam9g45_restart; at91_sysirq_mask_rtc(AT91SAM9G45_BASE_RTC); at91_sysirq_mask_rtt(AT91SAM9G45_BASE_RTT); @@ -393,6 +391,50 @@ static void __init at91sam9g45_initialize(void) at91_gpio_init(at91sam9g45_gpio, 5); } +static struct resource rstc_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_RSTC, + .end = AT91SAM9G45_BASE_RSTC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_BASE_DDRSDRC1, + .end = AT91SAM9G45_BASE_DDRSDRC1 + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = AT91SAM9G45_BASE_DDRSDRC0, + .end = AT91SAM9G45_BASE_DDRSDRC0 + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rstc_device = { + .name = "at91-sam9g45-reset", + .resource = rstc_resources, + .num_resources = ARRAY_SIZE(rstc_resources), +}; + +static struct resource shdwc_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_SHDWC, + .end = AT91SAM9G45_BASE_SHDWC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device shdwc_device = { + .name = "at91-poweroff", + .resource = shdwc_resources, + .num_resources = ARRAY_SIZE(shdwc_resources), +}; + +static void __init at91sam9g45_register_devices(void) +{ + platform_device_register(&rstc_device); + platform_device_register(&shdwc_device); +} + /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ @@ -435,11 +477,18 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ0) */ }; +static void __init at91sam9g45_init_time(void) +{ + at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); +} + AT91_SOC_START(at91sam9g45) .map_io = at91sam9g45_map_io, .default_irq_priority = at91sam9g45_default_irq_priority, .extern_irq = (1 << AT91SAM9G45_ID_IRQ0), .ioremap_registers = at91sam9g45_ioremap_registers, .register_clocks = at91sam9g45_register_clocks, + .register_devices = at91sam9g45_register_devices, .init = at91sam9g45_initialize, + .init_time = at91sam9g45_init_time, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S deleted file mode 100644 index c40c1e2ef80f..000000000000 --- a/arch/arm/mach-at91/at91sam9g45_reset.S +++ /dev/null @@ -1,45 +0,0 @@ -/* - * reset AT91SAM9G45 as per errata - * - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcosoft.com> - * - * unless the SDRAM is cleanly shutdown before we hit the - * reset register it can be left driving the data bus and - * killing the chance of a subsequent boot from NAND - * - * GPLv2 Only - */ - -#include <linux/linkage.h> -#include <mach/hardware.h> -#include <mach/at91_ramc.h> -#include "at91_rstc.h" - .arm - -/* - * at91_ramc_base is an array void* - * init at NULL if only one DDR controler is present in or DT - */ - .globl at91sam9g45_restart - -at91sam9g45_restart: - ldr r5, =at91_ramc_base @ preload constants - ldr r0, [r5] - ldr r5, [r5, #4] @ ddr1 - cmp r5, #0 - ldr r4, =at91_rstc_base - ldr r1, [r4] - - mov r2, #1 - mov r3, #AT91_DDRSDRC_LPCB_POWER_DOWN - ldr r4, =AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST - - .balign 32 @ align to cache line - - strne r2, [r5, #AT91_DDRSDRC_RTR] @ disable DDR1 access - strne r3, [r5, #AT91_DDRSDRC_LPR] @ power down DDR1 - str r2, [r0, #AT91_DDRSDRC_RTR] @ disable DDR0 access - str r3, [r0, #AT91_DDRSDRC_LPR] @ power down DDR0 - str r4, [r1, #AT91_RSTC_CR] @ reset processor - - b . diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 878d5015daab..f553e4ea034b 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -10,6 +10,7 @@ */ #include <linux/module.h> +#include <linux/platform_device.h> #include <linux/clk/at91_pmc.h> #include <asm/proc-fns.h> @@ -23,7 +24,6 @@ #include <mach/hardware.h> #include "at91_aic.h" -#include "at91_rstc.h" #include "soc.h" #include "generic.h" #include "sam9_smc.h" @@ -311,8 +311,6 @@ static void __init at91sam9rl_map_io(void) static void __init at91sam9rl_ioremap_registers(void) { - at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC); - at91_ioremap_rstc(AT91SAM9RL_BASE_RSTC); at91_ioremap_ramc(0, AT91SAM9RL_BASE_SDRAMC, 512); at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC); @@ -323,7 +321,6 @@ static void __init at91sam9rl_ioremap_registers(void) static void __init at91sam9rl_initialize(void) { arm_pm_idle = at91sam9_idle; - arm_pm_restart = at91sam9_alt_restart; at91_sysirq_mask_rtc(AT91SAM9RL_BASE_RTC); at91_sysirq_mask_rtt(AT91SAM9RL_BASE_RTT); @@ -332,6 +329,45 @@ static void __init at91sam9rl_initialize(void) at91_gpio_init(at91sam9rl_gpio, 4); } +static struct resource rstc_resources[] = { + [0] = { + .start = AT91SAM9RL_BASE_RSTC, + .end = AT91SAM9RL_BASE_RSTC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9RL_BASE_SDRAMC, + .end = AT91SAM9RL_BASE_SDRAMC + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rstc_device = { + .name = "at91-sam9260-reset", + .resource = rstc_resources, + .num_resources = ARRAY_SIZE(rstc_resources), +}; + +static struct resource shdwc_resources[] = { + [0] = { + .start = AT91SAM9RL_BASE_SHDWC, + .end = AT91SAM9RL_BASE_SHDWC + SZ_16 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device shdwc_device = { + .name = "at91-poweroff", + .resource = shdwc_resources, + .num_resources = ARRAY_SIZE(shdwc_resources), +}; + +static void __init at91sam9rl_register_devices(void) +{ + platform_device_register(&rstc_device); + platform_device_register(&shdwc_device); +} + /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ @@ -374,6 +410,11 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; +static void __init at91sam9rl_init_time(void) +{ + at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); +} + AT91_SOC_START(at91sam9rl) .map_io = at91sam9rl_map_io, .default_irq_priority = at91sam9rl_default_irq_priority, @@ -382,5 +423,7 @@ AT91_SOC_START(at91sam9rl) #if defined(CONFIG_OLD_CLK_AT91) .register_clocks = at91sam9rl_register_clocks, #endif + .register_devices = at91sam9rl_register_devices, .init = at91sam9rl_initialize, + .init_time = at91sam9rl_init_time, AT91_SOC_END diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index 597c649170aa..e76e35ce81e7 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -167,6 +167,8 @@ static struct at91_cf_data afeb9260_cf_data = { static void __init afeb9260_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -211,7 +213,7 @@ static void __init afeb9260_board_init(void) MACHINE_START(AFEB9260, "Custom afeb9260 board") /* Maintainer: Sergey Lapin <slapin@ossfans.org> */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = afeb9260_init_early, diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index a30502c8d379..ae827dd2d0d2 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -170,6 +170,8 @@ static void __init cam60_add_device_nand(void) static void __init cam60_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -188,7 +190,7 @@ static void __init cam60_board_init(void) MACHINE_START(CAM60, "KwikByte CAM60") /* Maintainer: KwikByte */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = cam60_init_early, diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 2037f78c84e7..731c8318f4f5 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -322,6 +322,8 @@ static struct mci_platform_data __initdata cpu9krea_mci0_data = { static void __init cpu9krea_board_init(void) { + at91_register_devices(); + /* NOR */ cpu9krea_add_device_nor(); /* Serial */ @@ -375,7 +377,7 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260") MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") #endif /* Maintainer: Eric Benard - EUKREA Electromatique */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = cpu9krea_init_early, diff --git a/arch/arm/mach-at91/board-dt-rm9200.c b/arch/arm/mach-at91/board-dt-rm9200.c index f4b6e91843e4..226563f850b8 100644 --- a/arch/arm/mach-at91/board-dt-rm9200.c +++ b/arch/arm/mach-at91/board-dt-rm9200.c @@ -25,17 +25,6 @@ #include "at91_aic.h" #include "generic.h" - -static const struct of_device_id irq_of_match[] __initconst = { - { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, - { /*sentinel*/ } -}; - -static void __init at91rm9200_dt_init_irq(void) -{ - of_irq_init(irq_of_match); -} - static void __init at91rm9200_dt_timer_init(void) { #if defined(CONFIG_COMMON_CLK) @@ -52,8 +41,6 @@ static const char *at91rm9200_dt_board_compat[] __initdata = { DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)") .init_time = at91rm9200_dt_timer_init, .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, .init_early = at91rm9200_dt_initialize, - .init_irq = at91rm9200_dt_init_irq, .dt_compat = at91rm9200_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c index 575b0be66ca8..d3048ccdc41f 100644 --- a/arch/arm/mach-at91/board-dt-sam9.c +++ b/arch/arm/mach-at91/board-dt-sam9.c @@ -25,26 +25,6 @@ #include "board.h" #include "generic.h" - -static void __init sam9_dt_timer_init(void) -{ -#if defined(CONFIG_COMMON_CLK) - of_clk_init(NULL); -#endif - at91sam926x_pit_init(); -} - -static const struct of_device_id irq_of_match[] __initconst = { - - { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, - { /*sentinel*/ } -}; - -static void __init at91_dt_init_irq(void) -{ - of_irq_init(irq_of_match); -} - static const char *at91_dt_board_compat[] __initdata = { "atmel,at91sam9", NULL @@ -52,10 +32,7 @@ static const char *at91_dt_board_compat[] __initdata = { DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)") /* Maintainer: Atmel */ - .init_time = sam9_dt_timer_init, .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, .init_early = at91_dt_initialize, - .init_irq = at91_dt_init_irq, .dt_compat = at91_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c index 075ec0576ada..129e2917506b 100644 --- a/arch/arm/mach-at91/board-dt-sama5.c +++ b/arch/arm/mach-at91/board-dt-sama5.c @@ -27,64 +27,34 @@ #include "at91_aic.h" #include "generic.h" -static void __init sama5_dt_timer_init(void) -{ -#if defined(CONFIG_COMMON_CLK) - of_clk_init(NULL); -#endif - at91sam926x_pit_init(); -} - -static const struct of_device_id irq_of_match[] __initconst = { - - { .compatible = "atmel,sama5d3-aic", .data = at91_aic5_of_init }, - { /*sentinel*/ } -}; - -static void __init at91_dt_init_irq(void) -{ - of_irq_init(irq_of_match); -} - -static int ksz9021rn_phy_fixup(struct phy_device *phy) -{ - int value; - - /* Set delay values */ - value = MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW | 0x8000; - phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value); - value = 0xF2F4; - phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value); - value = MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW | 0x8000; - phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value); - value = 0x2222; - phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value); - - return 0; -} - static void __init sama5_dt_device_init(void) { - if (of_machine_is_compatible("atmel,sama5d3xcm") && - IS_ENABLED(CONFIG_PHYLIB)) - phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, - ksz9021rn_phy_fixup); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static const char *sama5_dt_board_compat[] __initdata = { +static const char *sama5_dt_board_compat[] __initconst = { "atmel,sama5", NULL }; DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)") /* Maintainer: Atmel */ - .init_time = sama5_dt_timer_init, .map_io = at91_map_io, - .handle_irq = at91_aic5_handle_irq, .init_early = at91_dt_initialize, - .init_irq = at91_dt_init_irq, .init_machine = sama5_dt_device_init, .dt_compat = sama5_dt_board_compat, MACHINE_END + +static const char *sama5_alt_dt_board_compat[] __initconst = { + "atmel,sama5d4", + NULL +}; + +DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5 (Device Tree)") + /* Maintainer: Atmel */ + .map_io = at91_alt_map_io, + .init_early = at91_dt_initialize, + .init_machine = sama5_dt_device_init, + .dt_compat = sama5_alt_dt_board_compat, + .l2c_aux_mask = ~0UL, +MACHINE_END diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 68f1ab6bd08f..a6aa4a2432f2 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -138,6 +138,8 @@ static struct gpio_led flexibity_leds[] = { static void __init flexibity_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -160,7 +162,7 @@ static void __init flexibity_board_init(void) MACHINE_START(FLEXIBITY, "Flexibity Connect") /* Maintainer: Maxim Osipov */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = flexibity_init_early, diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c deleted file mode 100644 index 8b22c60bb238..000000000000 --- a/arch/arm/mach-at91/board-foxg20.c +++ /dev/null @@ -1,272 +0,0 @@ -/* - * Copyright (C) 2005 SAN People - * Copyright (C) 2008 Atmel - * Copyright (C) 2010 Lee McLoughlin - lee@lmmrtech.com - * Copyright (C) 2010 Sergio Tanzilli - tanzilli@acmesystems.it - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/at73c213.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/clk.h> -#include <linux/w1-gpio.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/at91sam9_smc.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - -/* - * The FOX Board G20 hardware comes as the "Netus G20" board with - * just the cpu, ram, dataflash and two header connectors. - * This is plugged into the FOX Board which provides the ethernet, - * usb, rtc, leds, switch, ... - * - * For more info visit: http://www.acmesystems.it/foxg20 - */ - - -static void __init foxg20_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata foxg20_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata foxg20_udc_data = { - .vbus_pin = AT91_PIN_PC6, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - - -/* - * SPI devices. - */ -static struct spi_board_info foxg20_spi_devices[] = { -#if !IS_ENABLED(CONFIG_MMC_ATMELMCI) - { - .modalias = "mtd_dataflash", - .chip_select = 1, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata foxg20_macb_data = { - .phy_irq_pin = AT91_PIN_PA7, - .is_rmii = 1, -}; - -/* - * MCI (SD/MMC) - * det_pin, wp_pin and vcc_pin are not connected - */ -static struct mci_platform_data __initdata foxg20_mci0_data = { - .slot[1] = { - .bus_width = 4, - .detect_pin = -EINVAL, - .wp_pin = -EINVAL, - }, -}; - - -/* - * LEDs - */ -static struct gpio_led foxg20_leds[] = { - { /* user led, red */ - .name = "user_led", - .gpio = AT91_PIN_PC7, - .active_low = 0, - .default_trigger = "heartbeat", - }, -}; - - -/* - * GPIO Buttons - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button foxg20_buttons[] = { - { - .gpio = AT91_PIN_PC4, - .code = BTN_1, - .desc = "Button 1", - .active_low = 1, - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data foxg20_button_data = { - .buttons = foxg20_buttons, - .nbuttons = ARRAY_SIZE(foxg20_buttons), -}; - -static struct platform_device foxg20_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &foxg20_button_data, - } -}; - -static void __init foxg20_add_device_buttons(void) -{ - at91_set_gpio_input(AT91_PIN_PC4, 1); /* btn1 */ - at91_set_deglitch(AT91_PIN_PC4, 1); - - platform_device_register(&foxg20_button_device); -} -#else -static void __init foxg20_add_device_buttons(void) {} -#endif - - -#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE) -static struct w1_gpio_platform_data w1_gpio_pdata = { - /* If you choose to use a pin other than PB16 it needs to be 3.3V */ - .pin = AT91_PIN_PB16, - .is_open_drain = 1, - .ext_pullup_enable_pin = -EINVAL, -}; - -static struct platform_device w1_device = { - .name = "w1-gpio", - .id = -1, - .dev.platform_data = &w1_gpio_pdata, -}; - -static void __init at91_add_device_w1(void) -{ - at91_set_GPIO_periph(w1_gpio_pdata.pin, 1); - at91_set_multi_drive(w1_gpio_pdata.pin, 1); - platform_device_register(&w1_device); -} - -#endif - - -static struct i2c_board_info __initdata foxg20_i2c_devices[] = { - { - I2C_BOARD_INFO("24c512", 0x50), - }, -}; - - -static void __init foxg20_board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, - ATMEL_UART_CTS - | ATMEL_UART_RTS - | ATMEL_UART_DTR - | ATMEL_UART_DSR - | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, - ATMEL_UART_CTS - | ATMEL_UART_RTS); - - /* USART2 on ttyS3. (Rx & Tx only) */ - at91_register_uart(AT91SAM9260_ID_US2, 3, 0); - - /* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US3, 4, - ATMEL_UART_CTS - | ATMEL_UART_RTS); - - /* USART4 on ttyS5. (Rx & Tx only) */ - at91_register_uart(AT91SAM9260_ID_US4, 5, 0); - - /* USART5 on ttyS6. (Rx & Tx only) */ - at91_register_uart(AT91SAM9260_ID_US5, 6, 0); - - /* Set the internal pull-up resistor on DRXD */ - at91_set_A_periph(AT91_PIN_PB14, 1); - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&foxg20_usbh_data); - /* USB Device */ - at91_add_device_udc(&foxg20_udc_data); - /* SPI */ - at91_add_device_spi(foxg20_spi_devices, ARRAY_SIZE(foxg20_spi_devices)); - /* Ethernet */ - at91_add_device_eth(&foxg20_macb_data); - /* MMC */ - at91_add_device_mci(0, &foxg20_mci0_data); - /* I2C */ - at91_add_device_i2c(foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices)); - /* LEDs */ - at91_gpio_leds(foxg20_leds, ARRAY_SIZE(foxg20_leds)); - /* Push Buttons */ - foxg20_add_device_buttons(); -#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE) - at91_add_device_w1(); -#endif -} - -MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20") - /* Maintainer: Sergio Tanzilli */ - .init_time = at91sam926x_pit_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = foxg20_init_early, - .init_irq = at91_init_irq_default, - .init_machine = foxg20_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index b729dd1271bf..bf5cc55c7db6 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -576,7 +576,7 @@ static void __init gsia18s_board_init(void) } MACHINE_START(GSIA18S, "GS_IA18_S") - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = gsia18s_init_early, diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index b48d95ec5152..9c26b94ce448 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -219,7 +219,7 @@ static void __init pcontrol_g20_board_init(void) MACHINE_START(PCONTROL_G20, "PControl G20") /* Maintainer: pgsellmann@portner-elektronik.at */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = pcontrol_g20_init_early, diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c deleted file mode 100644 index f28e8b74df4b..000000000000 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ /dev/null @@ -1,232 +0,0 @@ -/* - * board-rsi-ews.c - * - * Copyright (C) - * 2005 SAN People, - * 2008-2011 R-S-I Elektrotechnik GmbH & Co. KG - * - * Licensed under GPLv2 or later. - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/mtd/physmap.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> - -#include <linux/gpio.h> - -#include "at91_aic.h" -#include "board.h" -#include "generic.h" -#include "gpio.h" - -static void __init rsi_ews_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* - * Ethernet - */ -static struct macb_platform_data rsi_ews_eth_data __initdata = { - .phy_irq_pin = AT91_PIN_PC4, - .is_rmii = 1, -}; - -/* - * USB Host - */ -static struct at91_usbh_data rsi_ews_usbh_data __initdata = { - .ports = 1, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * SD/MC - */ -static struct mci_platform_data __initdata rsi_ews_mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PB27, - .wp_pin = AT91_PIN_PB29, - }, -}; - -/* - * I2C - */ -static struct i2c_board_info rsi_ews_i2c_devices[] __initdata = { - { - I2C_BOARD_INFO("ds1337", 0x68), - }, - { - I2C_BOARD_INFO("24c01", 0x50), - } -}; - -/* - * LEDs - */ -static struct gpio_led rsi_ews_leds[] = { - { - .name = "led0", - .gpio = AT91_PIN_PB6, - .active_low = 0, - }, - { - .name = "led1", - .gpio = AT91_PIN_PB7, - .active_low = 0, - }, - { - .name = "led2", - .gpio = AT91_PIN_PB8, - .active_low = 0, - }, - { - .name = "led3", - .gpio = AT91_PIN_PB9, - .active_low = 0, - }, -}; - -/* - * DataFlash - */ -static struct spi_board_info rsi_ews_spi_devices[] = { - { /* DataFlash chip 1*/ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 5 * 1000 * 1000, - }, - { /* DataFlash chip 2*/ - .modalias = "mtd_dataflash", - .chip_select = 1, - .max_speed_hz = 5 * 1000 * 1000, - }, -}; - -/* - * NOR flash - */ -static struct mtd_partition rsiews_nor_partitions[] = { - { - .name = "boot", - .offset = 0, - .size = 3 * SZ_128K, - .mask_flags = MTD_WRITEABLE - }, - { - .name = "kernel", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_2M - (3 * SZ_128K) - }, - { - .name = "root", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_8M - }, - { - .name = "kernelupd", - .offset = MTDPART_OFS_NXTBLK, - .size = 3 * SZ_512K, - .mask_flags = MTD_WRITEABLE - }, - { - .name = "rootupd", - .offset = MTDPART_OFS_NXTBLK, - .size = 9 * SZ_512K, - .mask_flags = MTD_WRITEABLE - }, -}; - -static struct physmap_flash_data rsiews_nor_data = { - .width = 2, - .parts = rsiews_nor_partitions, - .nr_parts = ARRAY_SIZE(rsiews_nor_partitions), -}; - -#define NOR_BASE AT91_CHIPSELECT_0 -#define NOR_SIZE SZ_16M - -static struct resource nor_flash_resources[] = { - { - .start = NOR_BASE, - .end = NOR_BASE + NOR_SIZE - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device rsiews_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &rsiews_nor_data, - }, - .resource = nor_flash_resources, - .num_resources = ARRAY_SIZE(nor_flash_resources), -}; - -/* - * Init Func - */ -static void __init rsi_ews_board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - /* This one is for debugging */ - at91_register_uart(0, 0, 0); - - /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - /* Dialin/-out modem interface */ - at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART3 on ttyS4. (Rx, Tx, RTS) */ - /* RS485 communication */ - at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS); - at91_add_device_serial(); - at91_set_gpio_output(AT91_PIN_PA21, 0); - /* Ethernet */ - at91_add_device_eth(&rsi_ews_eth_data); - /* USB Host */ - at91_add_device_usbh(&rsi_ews_usbh_data); - /* I2C */ - at91_add_device_i2c(rsi_ews_i2c_devices, - ARRAY_SIZE(rsi_ews_i2c_devices)); - /* SPI */ - at91_add_device_spi(rsi_ews_spi_devices, - ARRAY_SIZE(rsi_ews_spi_devices)); - /* MMC */ - at91_add_device_mci(0, &rsi_ews_mci0_data); - /* NOR Flash */ - platform_device_register(&rsiews_nor_flash); - /* LEDs */ - at91_gpio_leds(rsi_ews_leds, ARRAY_SIZE(rsi_ews_leds)); -} - -MACHINE_START(RSI_EWS, "RSI EWS") - /* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */ - .init_time = at91rm9200_timer_init, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = rsi_ews_init_early, - .init_irq = at91_init_irq_default, - .init_machine = rsi_ews_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index d24dda67e2d3..c2166e3a236c 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -187,6 +187,8 @@ static struct gpio_led ek_leds[] = { static void __init ek_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -219,7 +221,7 @@ static void __init ek_board_init(void) MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") /* Maintainer: Olimex */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 65dea12d685e..bf8a946b4cd0 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -45,7 +45,6 @@ #include <mach/system_rev.h> #include "at91_aic.h" -#include "at91_shdwc.h" #include "board.h" #include "sam9_smc.h" #include "generic.h" @@ -307,6 +306,8 @@ static void __init ek_add_device_buttons(void) {} static void __init ek_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -344,7 +345,7 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 4637432de08f..e85ada820bfb 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -49,7 +49,6 @@ #include <mach/system_rev.h> #include "at91_aic.h" -#include "at91_shdwc.h" #include "board.h" #include "sam9_smc.h" #include "generic.h" @@ -561,6 +560,8 @@ static struct gpio_led ek_leds[] = { static void __init ek_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -603,7 +604,7 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, @@ -613,7 +614,7 @@ MACHINE_END MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index fc446097f410..d76680f2a209 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -50,7 +50,6 @@ #include <mach/system_rev.h> #include "at91_aic.h" -#include "at91_shdwc.h" #include "board.h" #include "sam9_smc.h" #include "generic.h" @@ -439,6 +438,8 @@ static struct platform_device *devices[] __initdata = { static void __init ek_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -483,7 +484,7 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index e1be6e25b380..49f075213451 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -410,7 +410,7 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, @@ -420,7 +420,7 @@ MACHINE_END MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index b227732b0c83..a517c7f7af92 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -48,7 +48,6 @@ #include <mach/system_rev.h> #include "at91_aic.h" -#include "at91_shdwc.h" #include "board.h" #include "sam9_smc.h" #include "generic.h" @@ -471,6 +470,8 @@ static struct platform_device *devices[] __initdata = { static void __init ek_board_init(void) { + at91_register_devices(); + /* Serial */ /* DGBU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -517,7 +518,7 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index b64648b4a1fc..8bca329b0293 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -35,7 +35,6 @@ #include "at91_aic.h" -#include "at91_shdwc.h" #include "board.h" #include "sam9_smc.h" #include "generic.h" @@ -292,6 +291,8 @@ static void __init ek_add_device_buttons(void) {} static void __init ek_board_init(void) { + at91_register_devices(); + /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -323,7 +324,7 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") /* Maintainer: Atmel */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 1b870e6def0c..b4aff840a1a0 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -154,6 +154,8 @@ static void __init snapper9260_add_device_nand(void) static void __init snapper9260_board_init(void) { + at91_register_devices(); + at91_add_device_i2c(snapper9260_i2c_devices, ARRAY_SIZE(snapper9260_i2c_devices)); @@ -178,7 +180,7 @@ static void __init snapper9260_board_init(void) } MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = snapper9260_init_early, diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 3b575036ff96..e825641a1dee 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -275,7 +275,7 @@ static void __init stamp9g20evb_board_init(void) MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = stamp9g20_init_early, @@ -285,7 +285,7 @@ MACHINE_END MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ - .init_time = at91sam926x_pit_init, + .init_time = at91_init_time, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = stamp9g20_init_early, diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 034529d801b2..d66f102c352a 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -962,6 +962,7 @@ static int __init at91_clock_reset(void) } at91_pmc_write(AT91_PMC_SCDR, scdr); + at91_pmc_write(AT91_PMC_PCDR, pcdr); if (cpu_is_sama5d3()) at91_pmc_write(AT91_PMC_PCDR1, pcdr1); diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 631fa3b8c16d..81959cf4a137 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -8,12 +8,16 @@ * published by the Free Software Foundation. */ +#ifndef _AT91_GENERIC_H +#define _AT91_GENERIC_H + #include <linux/clkdev.h> #include <linux/of.h> #include <linux/reboot.h> /* Map io */ extern void __init at91_map_io(void); +extern void __init at91_alt_map_io(void); extern void __init at91_init_sram(int bank, unsigned long base, unsigned int length); @@ -37,12 +41,15 @@ extern int __init at91_aic5_of_init(struct device_node *node, extern void __init at91_sysirq_mask_rtc(u32 rtc_base); extern void __init at91_sysirq_mask_rtt(u32 rtt_base); + /* Devices */ +extern void __init at91_register_devices(void); /* Timer */ +extern void __init at91_init_time(void); extern void at91rm9200_ioremap_st(u32 addr); extern void at91rm9200_timer_init(void); extern void at91sam926x_ioremap_pit(u32 addr); -extern void at91sam926x_pit_init(void); +extern void at91sam926x_pit_init(int irq); extern void at91x40_timer_init(void); /* Clocks */ @@ -62,14 +69,6 @@ extern void at91_irq_resume(void); /* idle */ extern void at91sam9_idle(void); -/* reset */ -extern void at91_ioremap_rstc(u32 base_addr); -extern void at91sam9_alt_restart(enum reboot_mode, const char *); -extern void at91sam9g45_restart(enum reboot_mode, const char *); - -/* shutdown */ -extern void at91_ioremap_shdwc(u32 base_addr); - /* Matrix */ extern void at91_ioremap_matrix(u32 base_addr); @@ -90,3 +89,5 @@ extern int __init at91_gpio_of_irq_setup(struct device_node *node, struct device_node *parent); extern u32 at91_get_extern_irq(void); + +#endif /* _AT91_GENERIC_H */ diff --git a/arch/arm/mach-at91/include/mach/at91_pio.h b/arch/arm/mach-at91/include/mach/at91_pio.h index 732b11c37f1a..7b7366253ceb 100644 --- a/arch/arm/mach-at91/include/mach/at91_pio.h +++ b/arch/arm/mach-at91/include/mach/at91_pio.h @@ -71,4 +71,10 @@ #define ABCDSR_PERIPH_C 0x2 #define ABCDSR_PERIPH_D 0x3 +#define SAMA5D3_PIO_DRIVER1 0x118 /*PIO Driver 1 register offset*/ +#define SAMA5D3_PIO_DRIVER2 0x11C /*PIO Driver 2 register offset*/ + +#define AT91SAM9X5_PIO_DRIVER1 0x114 /*PIO Driver 1 register offset*/ +#define AT91SAM9X5_PIO_DRIVER2 0x118 /*PIO Driver 2 register offset*/ + #endif diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 86c71debab5b..b27e9ca65653 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -36,7 +36,7 @@ #define ARCH_ID_AT91M40807 0x14080745 #define ARCH_ID_AT91R40008 0x44000840 -#define ARCH_ID_SAMA5D3 0x8A5C07C0 +#define ARCH_ID_SAMA5 0x8A5C07C0 #define ARCH_EXID_AT91SAM9M11 0x00000001 #define ARCH_EXID_AT91SAM9M10 0x00000002 @@ -49,12 +49,19 @@ #define ARCH_EXID_AT91SAM9G25 0x00000003 #define ARCH_EXID_AT91SAM9X25 0x00000004 +#define ARCH_EXID_SAMA5D3 0x00004300 #define ARCH_EXID_SAMA5D31 0x00444300 #define ARCH_EXID_SAMA5D33 0x00414300 #define ARCH_EXID_SAMA5D34 0x00414301 #define ARCH_EXID_SAMA5D35 0x00584300 #define ARCH_EXID_SAMA5D36 0x00004301 +#define ARCH_EXID_SAMA5D4 0x00000007 +#define ARCH_EXID_SAMA5D41 0x00000001 +#define ARCH_EXID_SAMA5D42 0x00000002 +#define ARCH_EXID_SAMA5D43 0x00000003 +#define ARCH_EXID_SAMA5D44 0x00000004 + #define ARCH_FAMILY_AT91X92 0x09200000 #define ARCH_FAMILY_AT91SAM9 0x01900000 #define ARCH_FAMILY_AT91SAM9XE 0x02900000 @@ -86,6 +93,9 @@ enum at91_soc_type { /* SAMA5D3 */ AT91_SOC_SAMA5D3, + /* SAMA5D4 */ + AT91_SOC_SAMA5D4, + /* Unknown type */ AT91_SOC_UNKNOWN, }; @@ -108,6 +118,10 @@ enum at91_soc_subtype { AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34, AT91_SOC_SAMA5D35, AT91_SOC_SAMA5D36, + /* SAMA5D4 */ + AT91_SOC_SAMA5D41, AT91_SOC_SAMA5D42, AT91_SOC_SAMA5D43, + AT91_SOC_SAMA5D44, + /* No subtype for this SoC */ AT91_SOC_SUBTYPE_NONE, @@ -211,6 +225,12 @@ static inline int at91_soc_is_detected(void) #define cpu_is_sama5d3() (0) #endif +#ifdef CONFIG_SOC_SAMA5D4 +#define cpu_is_sama5d4() (at91_soc_initdata.type == AT91_SOC_SAMA5D4) +#else +#define cpu_is_sama5d4() (0) +#endif + /* * Since this is ARM, we will never run on any AVR32 CPU. But these * definitions may reduce clutter in common drivers. diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S index c6bb9e2d9baa..2103a90f2261 100644 --- a/arch/arm/mach-at91/include/mach/debug-macro.S +++ b/arch/arm/mach-at91/include/mach/debug-macro.S @@ -16,8 +16,11 @@ #if defined(CONFIG_AT91_DEBUG_LL_DBGU0) #define AT91_DBGU AT91_BASE_DBGU0 -#else +#elif defined(CONFIG_AT91_DEBUG_LL_DBGU1) #define AT91_DBGU AT91_BASE_DBGU1 +#else +/* On sama5d4, use USART3 as low level serial console */ +#define AT91_DBGU SAMA5D4_BASE_USART3 #endif .macro addruart, rp, rv, tmp diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 56338245653a..c13797352688 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -19,8 +19,10 @@ /* DBGU base */ /* rm9200, 9260/9g20, 9261/9g10, 9rl */ #define AT91_BASE_DBGU0 0xfffff200 -/* 9263, 9g45 */ +/* 9263, 9g45, sama5d3 */ #define AT91_BASE_DBGU1 0xffffee00 +/* sama5d4 */ +#define AT91_BASE_DBGU2 0xfc069000 #if defined(CONFIG_ARCH_AT91X40) #include <mach/at91x40.h> @@ -34,6 +36,7 @@ #include <mach/at91sam9x5.h> #include <mach/at91sam9n12.h> #include <mach/sama5d3.h> +#include <mach/sama5d4.h> /* * On all at91 except rm9200 and x40 have the System Controller starts @@ -47,9 +50,15 @@ * and map the same memory space */ #define AT91_BASE_SYS 0xffffc000 + #endif /* + * On sama5d4 there is no system controller, we map some needed peripherals + */ +#define AT91_ALT_BASE_SYS 0xfc069000 + +/* * On all at91 have the Advanced Interrupt Controller starts at address * 0xfffff000 and the Power Management Controller starts at 0xfffffc00 */ @@ -69,23 +78,35 @@ */ #define AT91_IO_PHYS_BASE 0xFFF78000 #define AT91_IO_VIRT_BASE IOMEM(0xFF000000 - AT91_IO_SIZE) + +/* + * On sama5d4, remap the peripherals from address 0xFC069000 .. 0xFC06F000 + * to 0xFB069000 .. 0xFB06F000. (24Kb) + */ +#define AT91_ALT_IO_PHYS_BASE AT91_ALT_BASE_SYS +#define AT91_ALT_IO_VIRT_BASE IOMEM(0xFB069000) #else /* * Identity mapping for the non MMU case. */ #define AT91_IO_PHYS_BASE AT91_BASE_SYS #define AT91_IO_VIRT_BASE IOMEM(AT91_IO_PHYS_BASE) + +#define AT91_ALT_IO_PHYS_BASE AT91_ALT_BASE_SYS +#define AT91_ALT_IO_VIRT_BASE IOMEM(AT91_ALT_BASE_SYS) #endif #define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1) /* Convert a physical IO address to virtual IO address */ #define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE) +#define AT91_ALT_IO_P2V(x) ((x) - AT91_ALT_IO_PHYS_BASE + AT91_ALT_IO_VIRT_BASE) /* * Virtual to Physical Address mapping for IO devices. */ #define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS) +#define AT91_ALT_VA_BASE_SYS AT91_ALT_IO_P2V(AT91_ALT_BASE_SYS) /* Internal SRAM is mapped below the IO devices */ #define AT91_SRAM_MAX SZ_1M diff --git a/arch/arm/mach-at91/include/mach/sama5d4.h b/arch/arm/mach-at91/include/mach/sama5d4.h new file mode 100644 index 000000000000..f256a45d9854 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/sama5d4.h @@ -0,0 +1,33 @@ +/* + * Chip-specific header file for the SAMA5D4 family + * + * Copyright (C) 2013 Atmel Corporation, + * Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Common definitions. + * Based on SAMA5D4 datasheet. + * + * Licensed under GPLv2 or later. + */ + +#ifndef SAMA5D4_H +#define SAMA5D4_H + +/* + * User Peripheral physical base addresses. + */ +#define SAMA5D4_BASE_USART3 0xfc00c000 /* (USART3 non-secure) Base Address */ +#define SAMA5D4_BASE_PMC 0xf0018000 /* (PMC) Base Address */ +#define SAMA5D4_BASE_MPDDRC 0xf0010000 /* (MPDDRC) Base Address */ +#define SAMA5D4_BASE_PIOD 0xfc068000 /* (PIOD) Base Address */ + +/* Some other peripherals */ +#define SAMA5D4_BASE_SYS2 SAMA5D4_BASE_PIOD + +/* + * Internal Memory. + */ +#define SAMA5D4_NS_SRAM_BASE 0x00210000 /* Internal SRAM base address Non-Secure */ +#define SAMA5D4_NS_SRAM_SIZE (64 * SZ_1K) /* Internal SRAM size Non-Secure part (64Kb) */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h index 4bb644f8e87c..acb2d890ad7e 100644 --- a/arch/arm/mach-at91/include/mach/uncompress.h +++ b/arch/arm/mach-at91/include/mach/uncompress.h @@ -94,7 +94,7 @@ static const u32 uarts_sam9x5[] = { 0, }; -static const u32 uarts_sama5[] = { +static const u32 uarts_sama5d3[] = { AT91_BASE_DBGU1, SAMA5D3_BASE_USART0, SAMA5D3_BASE_USART1, @@ -103,6 +103,12 @@ static const u32 uarts_sama5[] = { 0, }; +static const u32 uarts_sama5d4[] = { + AT91_BASE_DBGU2, + SAMA5D4_BASE_USART3, + 0, +}; + static inline const u32* decomp_soc_detect(void __iomem *dbgu_base) { u32 cidr, socid; @@ -134,8 +140,14 @@ static inline const u32* decomp_soc_detect(void __iomem *dbgu_base) case ARCH_ID_AT91SAM9X5: return uarts_sam9x5; - case ARCH_ID_SAMA5D3: - return uarts_sama5; + case ARCH_ID_SAMA5: + cidr = __raw_readl(dbgu_base + AT91_DBGU_EXID); + if (cidr & ARCH_EXID_SAMA5D3) + return uarts_sama5d3; + else if (cidr & ARCH_EXID_SAMA5D4) + return uarts_sama5d4; + + break; } /* at91sam9g10 */ @@ -156,9 +168,10 @@ static inline void arch_decomp_setup(void) const u32* usarts; usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU0); - if (!usarts) usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU1); + if (!usarts) + usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU2); if (!usarts) { at91_uart = NULL; return; diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index 3d192c5aee66..cdb3ec9efd2b 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -48,11 +48,6 @@ void __iomem *at91_aic_base; static struct irq_domain *at91_aic_domain; static struct device_node *at91_aic_np; static unsigned int n_irqs = NR_AIC_IRQS; -static unsigned long at91_aic_caps = 0; - -/* AIC5 introduces a Source Select Register */ -#define AT91_AIC_CAP_AIC5 (1 << 0) -#define has_aic5() (at91_aic_caps & AT91_AIC_CAP_AIC5) #ifdef CONFIG_PM @@ -92,50 +87,14 @@ static int at91_aic_set_wake(struct irq_data *d, unsigned value) void at91_irq_suspend(void) { - int bit = -1; - - if (has_aic5()) { - /* disable enabled irqs */ - while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) { - at91_aic_write(AT91_AIC5_SSR, - bit & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IDCR, 1); - } - /* enable wakeup irqs */ - bit = -1; - while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) { - at91_aic_write(AT91_AIC5_SSR, - bit & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IECR, 1); - } - } else { - at91_aic_write(AT91_AIC_IDCR, *backups); - at91_aic_write(AT91_AIC_IECR, *wakeups); - } + at91_aic_write(AT91_AIC_IDCR, *backups); + at91_aic_write(AT91_AIC_IECR, *wakeups); } void at91_irq_resume(void) { - int bit = -1; - - if (has_aic5()) { - /* disable wakeup irqs */ - while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) { - at91_aic_write(AT91_AIC5_SSR, - bit & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IDCR, 1); - } - /* enable irqs disabled for suspend */ - bit = -1; - while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) { - at91_aic_write(AT91_AIC5_SSR, - bit & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IECR, 1); - } - } else { - at91_aic_write(AT91_AIC_IDCR, *wakeups); - at91_aic_write(AT91_AIC_IECR, *backups); - } + at91_aic_write(AT91_AIC_IDCR, *wakeups); + at91_aic_write(AT91_AIC_IECR, *backups); } #else @@ -169,21 +128,6 @@ at91_aic_handle_irq(struct pt_regs *regs) handle_IRQ(irqnr, regs); } -asmlinkage void __exception_irq_entry -at91_aic5_handle_irq(struct pt_regs *regs) -{ - u32 irqnr; - u32 irqstat; - - irqnr = at91_aic_read(AT91_AIC5_IVR); - irqstat = at91_aic_read(AT91_AIC5_ISR); - - if (!irqstat) - at91_aic_write(AT91_AIC5_EOICR, 0); - else - handle_IRQ(irqnr, regs); -} - static void at91_aic_mask_irq(struct irq_data *d) { /* Disable interrupt on AIC */ @@ -192,15 +136,6 @@ static void at91_aic_mask_irq(struct irq_data *d) clear_backup(d->hwirq); } -static void __maybe_unused at91_aic5_mask_irq(struct irq_data *d) -{ - /* Disable interrupt on AIC5 */ - at91_aic_write(AT91_AIC5_SSR, d->hwirq & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IDCR, 1); - /* Update ISR cache */ - clear_backup(d->hwirq); -} - static void at91_aic_unmask_irq(struct irq_data *d) { /* Enable interrupt on AIC */ @@ -209,15 +144,6 @@ static void at91_aic_unmask_irq(struct irq_data *d) set_backup(d->hwirq); } -static void __maybe_unused at91_aic5_unmask_irq(struct irq_data *d) -{ - /* Enable interrupt on AIC5 */ - at91_aic_write(AT91_AIC5_SSR, d->hwirq & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IECR, 1); - /* Update ISR cache */ - set_backup(d->hwirq); -} - static void at91_aic_eoi(struct irq_data *d) { /* @@ -227,11 +153,6 @@ static void at91_aic_eoi(struct irq_data *d) at91_aic_write(AT91_AIC_EOICR, 0); } -static void __maybe_unused at91_aic5_eoi(struct irq_data *d) -{ - at91_aic_write(AT91_AIC5_EOICR, 0); -} - static unsigned long *at91_extern_irq; u32 at91_get_extern_irq(void) @@ -282,16 +203,8 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type) if (srctype < 0) return srctype; - if (has_aic5()) { - at91_aic_write(AT91_AIC5_SSR, - d->hwirq & AT91_AIC5_INTSEL_MSK); - smr = at91_aic_read(AT91_AIC5_SMR) & ~AT91_AIC_SRCTYPE; - at91_aic_write(AT91_AIC5_SMR, smr | srctype); - } else { - smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) - & ~AT91_AIC_SRCTYPE; - at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype); - } + smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) & ~AT91_AIC_SRCTYPE; + at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype); return 0; } @@ -331,177 +244,6 @@ static void __init at91_aic_hw_init(unsigned int spu_vector) at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF); } -static void __init __maybe_unused at91_aic5_hw_init(unsigned int spu_vector) -{ - int i; - - /* - * Perform 8 End Of Interrupt Command to make sure AIC - * will not Lock out nIRQ - */ - for (i = 0; i < 8; i++) - at91_aic_write(AT91_AIC5_EOICR, 0); - - /* - * Spurious Interrupt ID in Spurious Vector Register. - * When there is no current interrupt, the IRQ Vector Register - * reads the value stored in AIC_SPU - */ - at91_aic_write(AT91_AIC5_SPU, spu_vector); - - /* No debugging in AIC: Debug (Protect) Control Register */ - at91_aic_write(AT91_AIC5_DCR, 0); - - /* Disable and clear all interrupts initially */ - for (i = 0; i < n_irqs; i++) { - at91_aic_write(AT91_AIC5_SSR, i & AT91_AIC5_INTSEL_MSK); - at91_aic_write(AT91_AIC5_IDCR, 1); - at91_aic_write(AT91_AIC5_ICCR, 1); - } -} - -#if defined(CONFIG_OF) -static unsigned int *at91_aic_irq_priorities; - -static int at91_aic_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - /* Put virq number in Source Vector Register */ - at91_aic_write(AT91_AIC_SVR(hw), virq); - - /* Active Low interrupt, with priority */ - at91_aic_write(AT91_AIC_SMR(hw), - AT91_AIC_SRCTYPE_LOW | at91_aic_irq_priorities[hw]); - - irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq); - set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); - - return 0; -} - -static int at91_aic5_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - at91_aic_write(AT91_AIC5_SSR, hw & AT91_AIC5_INTSEL_MSK); - - /* Put virq number in Source Vector Register */ - at91_aic_write(AT91_AIC5_SVR, virq); - - /* Active Low interrupt, with priority */ - at91_aic_write(AT91_AIC5_SMR, - AT91_AIC_SRCTYPE_LOW | at91_aic_irq_priorities[hw]); - - irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq); - set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); - - return 0; -} - -static int at91_aic_irq_domain_xlate(struct irq_domain *d, struct device_node *ctrlr, - const u32 *intspec, unsigned int intsize, - irq_hw_number_t *out_hwirq, unsigned int *out_type) -{ - if (WARN_ON(intsize < 3)) - return -EINVAL; - if (WARN_ON(intspec[0] >= n_irqs)) - return -EINVAL; - if (WARN_ON((intspec[2] < AT91_AIC_IRQ_MIN_PRIORITY) - || (intspec[2] > AT91_AIC_IRQ_MAX_PRIORITY))) - return -EINVAL; - - *out_hwirq = intspec[0]; - *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK; - at91_aic_irq_priorities[*out_hwirq] = intspec[2]; - - return 0; -} - -static struct irq_domain_ops at91_aic_irq_ops = { - .map = at91_aic_irq_map, - .xlate = at91_aic_irq_domain_xlate, -}; - -int __init at91_aic_of_common_init(struct device_node *node, - struct device_node *parent) -{ - struct property *prop; - const __be32 *p; - u32 val; - - at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs) - * sizeof(*at91_extern_irq), GFP_KERNEL); - if (!at91_extern_irq) - return -ENOMEM; - - if (at91_aic_pm_init()) { - kfree(at91_extern_irq); - return -ENOMEM; - } - - at91_aic_irq_priorities = kzalloc(n_irqs - * sizeof(*at91_aic_irq_priorities), - GFP_KERNEL); - if (!at91_aic_irq_priorities) - return -ENOMEM; - - at91_aic_base = of_iomap(node, 0); - at91_aic_np = node; - - at91_aic_domain = irq_domain_add_linear(at91_aic_np, n_irqs, - &at91_aic_irq_ops, NULL); - if (!at91_aic_domain) - panic("Unable to add AIC irq domain (DT)\n"); - - of_property_for_each_u32(node, "atmel,external-irqs", prop, p, val) { - if (val >= n_irqs) - pr_warn("AIC: external irq %d >= %d skip it\n", - val, n_irqs); - else - set_bit(val, at91_extern_irq); - } - - irq_set_default_host(at91_aic_domain); - - return 0; -} - -int __init at91_aic_of_init(struct device_node *node, - struct device_node *parent) -{ - int err; - - err = at91_aic_of_common_init(node, parent); - if (err) - return err; - - at91_aic_hw_init(n_irqs); - - return 0; -} - -int __init at91_aic5_of_init(struct device_node *node, - struct device_node *parent) -{ - int err; - - at91_aic_caps |= AT91_AIC_CAP_AIC5; - n_irqs = NR_AIC5_IRQS; - at91_aic_chip.irq_ack = at91_aic5_mask_irq; - at91_aic_chip.irq_mask = at91_aic5_mask_irq; - at91_aic_chip.irq_unmask = at91_aic5_unmask_irq; - at91_aic_chip.irq_eoi = at91_aic5_eoi; - at91_aic_irq_ops.map = at91_aic5_irq_map; - - err = at91_aic_of_common_init(node, parent); - if (err) - return err; - - at91_aic5_hw_init(n_irqs); - - return 0; -} -#endif - /* * Initialize the AIC interrupt controller. */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index e95554532987..4073ab7f38f3 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -34,79 +34,8 @@ #include "pm.h" #include "gpio.h" -/* - * Show the reason for the previous system reset. - */ - -#include "at91_rstc.h" -#include "at91_shdwc.h" - static void (*at91_pm_standby)(void); -static void __init show_reset_status(void) -{ - static char reset[] __initdata = "reset"; - - static char general[] __initdata = "general"; - static char wakeup[] __initdata = "wakeup"; - static char watchdog[] __initdata = "watchdog"; - static char software[] __initdata = "software"; - static char user[] __initdata = "user"; - static char unknown[] __initdata = "unknown"; - - static char signal[] __initdata = "signal"; - static char rtc[] __initdata = "rtc"; - static char rtt[] __initdata = "rtt"; - static char restore[] __initdata = "power-restored"; - - char *reason, *r2 = reset; - u32 reset_type, wake_type; - - if (!at91_shdwc_base || !at91_rstc_base) - return; - - reset_type = at91_rstc_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP; - wake_type = at91_shdwc_read(AT91_SHDW_SR); - - switch (reset_type) { - case AT91_RSTC_RSTTYP_GENERAL: - reason = general; - break; - case AT91_RSTC_RSTTYP_WAKEUP: - /* board-specific code enabled the wakeup sources */ - reason = wakeup; - - /* "wakeup signal" */ - if (wake_type & AT91_SHDW_WAKEUP0) - r2 = signal; - else { - r2 = reason; - if (wake_type & AT91_SHDW_RTTWK) /* rtt wakeup */ - reason = rtt; - else if (wake_type & AT91_SHDW_RTCWK) /* rtc wakeup */ - reason = rtc; - else if (wake_type == 0) /* power-restored wakeup */ - reason = restore; - else /* unknown wakeup */ - reason = unknown; - } - break; - case AT91_RSTC_RSTTYP_WATCHDOG: - reason = watchdog; - break; - case AT91_RSTC_RSTTYP_SOFTWARE: - reason = software; - break; - case AT91_RSTC_RSTTYP_USER: - reason = user; - break; - default: - reason = unknown; - break; - } - pr_info("AT91: Starting after %s %s\n", reason, r2); -} - static int at91_pm_valid_state(suspend_state_t state) { switch (state) { @@ -206,16 +135,19 @@ static int at91_pm_enter(suspend_state_t state) at91_pinctrl_gpio_suspend(); else at91_gpio_suspend(); - at91_irq_suspend(); - pr_debug("AT91: PM - wake mask %08x, pm state %d\n", - /* remember all the always-wake irqs */ - (at91_pmc_read(AT91_PMC_PCSR) - | (1 << AT91_ID_FIQ) - | (1 << AT91_ID_SYS) - | (at91_get_extern_irq())) - & at91_aic_read(AT91_AIC_IMR), - state); + if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base) { + at91_irq_suspend(); + + pr_debug("AT91: PM - wake mask %08x, pm state %d\n", + /* remember all the always-wake irqs */ + (at91_pmc_read(AT91_PMC_PCSR) + | (1 << AT91_ID_FIQ) + | (1 << AT91_ID_SYS) + | (at91_get_extern_irq())) + & at91_aic_read(AT91_AIC_IMR), + state); + } switch (state) { /* @@ -280,12 +212,17 @@ static int at91_pm_enter(suspend_state_t state) goto error; } - pr_debug("AT91: PM - wakeup %08x\n", - at91_aic_read(AT91_AIC_IPR) & at91_aic_read(AT91_AIC_IMR)); + if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base) + pr_debug("AT91: PM - wakeup %08x\n", + at91_aic_read(AT91_AIC_IPR) & + at91_aic_read(AT91_AIC_IMR)); error: target_state = PM_SUSPEND_ON; - at91_irq_resume(); + + if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base) + at91_irq_resume(); + if (of_have_populated_dt()) at91_pinctrl_gpio_resume(); else @@ -338,7 +275,6 @@ static int __init at91_pm_init(void) suspend_set_ops(&at91_pm_ops); - show_reset_status(); return 0; } arch_initcall(at91_pm_init); diff --git a/arch/arm/mach-at91/sama5d4.c b/arch/arm/mach-at91/sama5d4.c new file mode 100644 index 000000000000..7638509639f4 --- /dev/null +++ b/arch/arm/mach-at91/sama5d4.c @@ -0,0 +1,64 @@ +/* + * Chip-specific setup code for the SAMA5D4 family + * + * Copyright (C) 2013 Atmel Corporation, + * Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +#include <linux/module.h> +#include <linux/dma-mapping.h> +#include <linux/clk/at91_pmc.h> + +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/sama5d4.h> +#include <mach/cpu.h> +#include <mach/hardware.h> + +#include "soc.h" +#include "generic.h" +#include "sam9_smc.h" + +/* -------------------------------------------------------------------- + * Processor initialization + * -------------------------------------------------------------------- */ +static struct map_desc at91_io_desc[] __initdata = { + { + .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC), + .pfn = __phys_to_pfn(SAMA5D4_BASE_MPDDRC), + .length = SZ_512, + .type = MT_DEVICE, + }, + { + .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC), + .pfn = __phys_to_pfn(SAMA5D4_BASE_PMC), + .length = SZ_512, + .type = MT_DEVICE, + }, + { /* On sama5d4, we use USART3 as serial console */ + .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3), + .pfn = __phys_to_pfn(SAMA5D4_BASE_USART3), + .length = SZ_256, + .type = MT_DEVICE, + }, + { /* A bunch of peripheral with fine grained IO space */ + .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2), + .pfn = __phys_to_pfn(SAMA5D4_BASE_SYS2), + .length = SZ_2K, + .type = MT_DEVICE, + }, +}; + + +static void __init sama5d4_map_io(void) +{ + iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc)); + at91_init_sram(0, SAMA5D4_NS_SRAM_BASE, SAMA5D4_NS_SRAM_SIZE); +} + +AT91_SOC_START(sama5d4) + .map_io = sama5d4_map_io, +AT91_SOC_END diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index f7a07a58ebb6..961079250b83 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -5,6 +5,8 @@ * Under GPLv2 */ +#define pr_fmt(fmt) "AT91: " fmt + #include <linux/module.h> #include <linux/io.h> #include <linux/mm.h> @@ -20,7 +22,6 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> -#include "at91_shdwc.h" #include "soc.h" #include "generic.h" #include "pm.h" @@ -37,7 +38,7 @@ void __init at91rm9200_set_type(int type) else at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; - pr_info("AT91: filled in soc subtype: %s\n", + pr_info("filled in soc subtype: %s\n", at91_get_soc_subtype(&at91_soc_initdata)); } @@ -49,7 +50,8 @@ void __init at91_init_irq_default(void) void __init at91_init_interrupts(unsigned int *priority) { /* Initialize the AIC interrupt controller */ - at91_aic_init(priority, at91_boot_soc.extern_irq); + if (IS_ENABLED(CONFIG_OLD_IRQ_AT91)) + at91_aic_init(priority, at91_boot_soc.extern_irq); /* Enable GPIO interrupts */ at91_gpio_irq_setup(); @@ -66,7 +68,7 @@ void __init at91_ioremap_ramc(int id, u32 addr, u32 size) } at91_ramc_base[id] = ioremap(addr, size); if (!at91_ramc_base[id]) - panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr); + panic(pr_fmt("Impossible to ioremap ramc.%d 0x%x\n"), id, addr); } static struct map_desc sram_desc[2] __initdata; @@ -83,7 +85,7 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length) desc->length = length; desc->type = MT_MEMORY_RWX_NONCACHED; - pr_info("AT91: sram at 0x%lx of 0x%x mapped at 0x%lx\n", + pr_info("sram at 0x%lx of 0x%x mapped at 0x%lx\n", base, length, desc->virtual); iotable_init(desc, 1); @@ -96,6 +98,13 @@ static struct map_desc at91_io_desc __initdata __maybe_unused = { .type = MT_DEVICE, }; +static struct map_desc at91_alt_io_desc __initdata __maybe_unused = { + .virtual = (unsigned long)AT91_ALT_VA_BASE_SYS, + .pfn = __phys_to_pfn(AT91_ALT_BASE_SYS), + .length = 24 * SZ_1K, + .type = MT_DEVICE, +}; + static void __init soc_detect(u32 dbgu_base) { u32 cidr, socid; @@ -158,9 +167,12 @@ static void __init soc_detect(u32 dbgu_base) at91_boot_soc = at91sam9n12_soc; break; - case ARCH_ID_SAMA5D3: - at91_soc_initdata.type = AT91_SOC_SAMA5D3; - at91_boot_soc = sama5d3_soc; + case ARCH_ID_SAMA5: + at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID); + if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) { + at91_soc_initdata.type = AT91_SOC_SAMA5D3; + at91_boot_soc = sama5d3_soc; + } break; } @@ -183,7 +195,8 @@ static void __init soc_detect(u32 dbgu_base) at91_soc_initdata.cidr = cidr; /* sub version of soc */ - at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID); + if (!at91_soc_initdata.exid) + at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID); if (at91_soc_initdata.type == AT91_SOC_SAM9G45) { switch (at91_soc_initdata.exid) { @@ -240,6 +253,54 @@ static void __init soc_detect(u32 dbgu_base) } } +static void __init alt_soc_detect(u32 dbgu_base) +{ + u32 cidr, socid; + + /* SoC ID */ + cidr = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_CIDR); + socid = cidr & ~AT91_CIDR_VERSION; + + switch (socid) { + case ARCH_ID_SAMA5: + at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID); + if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) { + at91_soc_initdata.type = AT91_SOC_SAMA5D3; + at91_boot_soc = sama5d3_soc; + } else if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D4) { + at91_soc_initdata.type = AT91_SOC_SAMA5D4; + at91_boot_soc = sama5d4_soc; + } + break; + } + + if (!at91_soc_is_detected()) + return; + + at91_soc_initdata.cidr = cidr; + + /* sub version of soc */ + if (!at91_soc_initdata.exid) + at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID); + + if (at91_soc_initdata.type == AT91_SOC_SAMA5D4) { + switch (at91_soc_initdata.exid) { + case ARCH_EXID_SAMA5D41: + at91_soc_initdata.subtype = AT91_SOC_SAMA5D41; + break; + case ARCH_EXID_SAMA5D42: + at91_soc_initdata.subtype = AT91_SOC_SAMA5D42; + break; + case ARCH_EXID_SAMA5D43: + at91_soc_initdata.subtype = AT91_SOC_SAMA5D43; + break; + case ARCH_EXID_SAMA5D44: + at91_soc_initdata.subtype = AT91_SOC_SAMA5D44; + break; + } + } +} + static const char *soc_name[] = { [AT91_SOC_RM9200] = "at91rm9200", [AT91_SOC_SAM9260] = "at91sam9260", @@ -252,6 +313,7 @@ static const char *soc_name[] = { [AT91_SOC_SAM9X5] = "at91sam9x5", [AT91_SOC_SAM9N12] = "at91sam9n12", [AT91_SOC_SAMA5D3] = "sama5d3", + [AT91_SOC_SAMA5D4] = "sama5d4", [AT91_SOC_UNKNOWN] = "Unknown", }; @@ -279,6 +341,10 @@ static const char *soc_subtype_name[] = { [AT91_SOC_SAMA5D34] = "sama5d34", [AT91_SOC_SAMA5D35] = "sama5d35", [AT91_SOC_SAMA5D36] = "sama5d36", + [AT91_SOC_SAMA5D41] = "sama5d41", + [AT91_SOC_SAMA5D42] = "sama5d42", + [AT91_SOC_SAMA5D43] = "sama5d43", + [AT91_SOC_SAMA5D44] = "sama5d44", [AT91_SOC_SUBTYPE_NONE] = "None", [AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown", }; @@ -302,43 +368,44 @@ void __init at91_map_io(void) soc_detect(AT91_BASE_DBGU1); if (!at91_soc_is_detected()) - panic("AT91: Impossible to detect the SOC type"); + panic(pr_fmt("Impossible to detect the SOC type")); - pr_info("AT91: Detected soc type: %s\n", + pr_info("Detected soc type: %s\n", at91_get_soc_type(&at91_soc_initdata)); if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE) - pr_info("AT91: Detected soc subtype: %s\n", + pr_info("Detected soc subtype: %s\n", at91_get_soc_subtype(&at91_soc_initdata)); if (!at91_soc_is_enabled()) - panic("AT91: Soc not enabled"); + panic(pr_fmt("Soc not enabled")); if (at91_boot_soc.map_io) at91_boot_soc.map_io(); } -void __iomem *at91_shdwc_base = NULL; - -static void at91sam9_poweroff(void) +void __init at91_alt_map_io(void) { - at91_shdwc_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW); -} + /* Map peripherals */ + iotable_init(&at91_alt_io_desc, 1); -void __init at91_ioremap_shdwc(u32 base_addr) -{ - at91_shdwc_base = ioremap(base_addr, 16); - if (!at91_shdwc_base) - panic("Impossible to ioremap at91_shdwc_base\n"); - pm_power_off = at91sam9_poweroff; -} + at91_soc_initdata.type = AT91_SOC_UNKNOWN; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN; -void __iomem *at91_rstc_base; + alt_soc_detect(AT91_BASE_DBGU2); + if (!at91_soc_is_detected()) + panic("AT91: Impossible to detect the SOC type"); -void __init at91_ioremap_rstc(u32 base_addr) -{ - at91_rstc_base = ioremap(base_addr, 16); - if (!at91_rstc_base) - panic("Impossible to ioremap at91_rstc_base\n"); + pr_info("AT91: Detected soc type: %s\n", + at91_get_soc_type(&at91_soc_initdata)); + if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE) + pr_info("AT91: Detected soc subtype: %s\n", + at91_get_soc_subtype(&at91_soc_initdata)); + + if (!at91_soc_is_enabled()) + panic("AT91: Soc not enabled"); + + if (at91_boot_soc.map_io) + at91_boot_soc.map_io(); } void __iomem *at91_matrix_base; @@ -348,42 +415,15 @@ void __init at91_ioremap_matrix(u32 base_addr) { at91_matrix_base = ioremap(base_addr, 512); if (!at91_matrix_base) - panic("Impossible to ioremap at91_matrix_base\n"); + panic(pr_fmt("Impossible to ioremap at91_matrix_base\n")); } #if defined(CONFIG_OF) && !defined(CONFIG_ARCH_AT91X40) -static struct of_device_id rstc_ids[] = { - { .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_alt_restart }, - { .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart }, - { /*sentinel*/ } -}; - -static void at91_dt_rstc(void) -{ - struct device_node *np; - const struct of_device_id *of_id; - - np = of_find_matching_node(NULL, rstc_ids); - if (!np) - panic("unable to find compatible rstc node in dtb\n"); - - at91_rstc_base = of_iomap(np, 0); - if (!at91_rstc_base) - panic("unable to map rstc cpu registers\n"); - - of_id = of_match_node(rstc_ids, np); - if (!of_id) - panic("AT91: rtsc no restart function available\n"); - - arm_pm_restart = of_id->data; - - of_node_put(np); -} - static struct of_device_id ramc_ids[] = { { .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby }, { .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby }, { .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby }, + { .compatible = "atmel,sama5d3-ddramc", .data = at91_ddr_standby }, { /*sentinel*/ } }; @@ -391,100 +431,29 @@ static void at91_dt_ramc(void) { struct device_node *np; const struct of_device_id *of_id; + int idx = 0; + const void *standby = NULL; - np = of_find_matching_node(NULL, ramc_ids); - if (!np) - panic("unable to find compatible ram controller node in dtb\n"); - - at91_ramc_base[0] = of_iomap(np, 0); - if (!at91_ramc_base[0]) - panic("unable to map ramc[0] cpu registers\n"); - /* the controller may have 2 banks */ - at91_ramc_base[1] = of_iomap(np, 1); + for_each_matching_node_and_match(np, ramc_ids, &of_id) { + at91_ramc_base[idx] = of_iomap(np, 0); + if (!at91_ramc_base[idx]) + panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx); - of_id = of_match_node(ramc_ids, np); - if (!of_id) - pr_warn("AT91: ramc no standby function available\n"); - else - at91_pm_set_standby(of_id->data); + if (!standby) + standby = of_id->data; - of_node_put(np); -} - -static struct of_device_id shdwc_ids[] = { - { .compatible = "atmel,at91sam9260-shdwc", }, - { .compatible = "atmel,at91sam9rl-shdwc", }, - { .compatible = "atmel,at91sam9x5-shdwc", }, - { /*sentinel*/ } -}; - -static const char *shdwc_wakeup_modes[] = { - [AT91_SHDW_WKMODE0_NONE] = "none", - [AT91_SHDW_WKMODE0_HIGH] = "high", - [AT91_SHDW_WKMODE0_LOW] = "low", - [AT91_SHDW_WKMODE0_ANYLEVEL] = "any", -}; - -const int at91_dtget_shdwc_wakeup_mode(struct device_node *np) -{ - const char *pm; - int err, i; - - err = of_property_read_string(np, "atmel,wakeup-mode", &pm); - if (err < 0) - return AT91_SHDW_WKMODE0_ANYLEVEL; - - for (i = 0; i < ARRAY_SIZE(shdwc_wakeup_modes); i++) - if (!strcasecmp(pm, shdwc_wakeup_modes[i])) - return i; - - return -ENODEV; -} - -static void at91_dt_shdwc(void) -{ - struct device_node *np; - int wakeup_mode; - u32 reg; - u32 mode = 0; - - np = of_find_matching_node(NULL, shdwc_ids); - if (!np) { - pr_debug("AT91: unable to find compatible shutdown (shdwc) controller node in dtb\n"); - return; + idx++; } - at91_shdwc_base = of_iomap(np, 0); - if (!at91_shdwc_base) - panic("AT91: unable to map shdwc cpu registers\n"); - - wakeup_mode = at91_dtget_shdwc_wakeup_mode(np); - if (wakeup_mode < 0) { - pr_warn("AT91: shdwc unknown wakeup mode\n"); - goto end; - } + if (!idx) + panic(pr_fmt("unable to find compatible ram controller node in dtb\n")); - if (!of_property_read_u32(np, "atmel,wakeup-counter", ®)) { - if (reg > AT91_SHDW_CPTWK0_MAX) { - pr_warn("AT91: shdwc wakeup counter 0x%x > 0x%x reduce it to 0x%x\n", - reg, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX); - reg = AT91_SHDW_CPTWK0_MAX; - } - mode |= AT91_SHDW_CPTWK0_(reg); + if (!standby) { + pr_warn("ramc no standby function available\n"); + return; } - if (of_property_read_bool(np, "atmel,wakeup-rtc-timer")) - mode |= AT91_SHDW_RTCWKEN; - - if (of_property_read_bool(np, "atmel,wakeup-rtt-timer")) - mode |= AT91_SHDW_RTTWKEN; - - at91_shdwc_write(AT91_SHDW_MR, wakeup_mode | mode); - -end: - pm_power_off = at91sam9_poweroff; - - of_node_put(np); + at91_pm_set_standby(standby); } void __init at91rm9200_dt_initialize(void) @@ -503,9 +472,7 @@ void __init at91rm9200_dt_initialize(void) void __init at91_dt_initialize(void) { - at91_dt_rstc(); at91_dt_ramc(); - at91_dt_shdwc(); /* Init clock subsystem */ at91_dt_clock_init(); @@ -533,3 +500,13 @@ void __init at91_initialize(unsigned long main_clock) pinctrl_provide_dummies(); } + +void __init at91_register_devices(void) +{ + at91_boot_soc.register_devices(); +} + +void __init at91_init_time(void) +{ + at91_boot_soc.init_time(); +} diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index a1e1482c6da8..9a8fd97a8bef 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -11,7 +11,9 @@ struct at91_init_soc { void (*map_io)(void); void (*ioremap_registers)(void); void (*register_clocks)(void); + void (*register_devices)(void); void (*init)(void); + void (*init_time)(void); }; extern struct at91_init_soc at91_boot_soc; @@ -24,6 +26,7 @@ extern struct at91_init_soc at91sam9rl_soc; extern struct at91_init_soc at91sam9x5_soc; extern struct at91_init_soc at91sam9n12_soc; extern struct at91_init_soc sama5d3_soc; +extern struct at91_init_soc sama5d4_soc; #define AT91_SOC_START(_name) \ struct at91_init_soc __initdata _name##_soc \ @@ -74,3 +77,7 @@ static inline int at91_soc_is_enabled(void) #if !defined(CONFIG_SOC_SAMA5D3) #define sama5d3_soc at91_boot_soc #endif + +#if !defined(CONFIG_SOC_SAMA5D4) +#define sama5d4_soc at91_boot_soc +#endif |