summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-davinci/board-da850-evm.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-davinci/board-da850-evm.c')
-rw-r--r--arch/arm/mach-davinci/board-da850-evm.c89
1 files changed, 68 insertions, 21 deletions
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 07de8db14581..b280efb1fa12 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -17,6 +17,7 @@
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/i2c/pca953x.h>
+#include <linux/mfd/tps6507x.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
@@ -24,6 +25,9 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/tps6507x.h>
+#include <linux/mfd/tps6507x.h>
+#include <linux/input/tps6507x-ts.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -46,8 +50,20 @@
static struct mtd_partition da850_evm_norflash_partition[] = {
{
- .name = "NOR filesystem",
+ .name = "bootloaders + env",
.offset = 0,
+ .size = SZ_512K,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0,
+ },
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0,
},
@@ -77,6 +93,18 @@ static struct platform_device da850_evm_norflash_device = {
.resource = da850_evm_norflash_resource,
};
+static struct davinci_pm_config da850_pm_pdata = {
+ .sleepcount = 128,
+};
+
+static struct platform_device da850_pm_device = {
+ .name = "pm-davinci",
+ .dev = {
+ .platform_data = &da850_pm_pdata,
+ },
+ .id = -1,
+};
+
/* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
* (128K blocks). It may be used instead of the (default) SPI flash
* to boot, using TI's tools to install the secondary boot loader
@@ -119,6 +147,7 @@ static struct davinci_nand_pdata da850_evm_nandflash_data = {
.parts = da850_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
+ .ecc_bits = 4,
.options = NAND_USE_FLASH_BBT,
};
@@ -181,12 +210,12 @@ static __init void da850_evm_setup_nor_nand(void)
int ret = 0;
if (ui_card_detected & !HAS_MMC) {
- ret = da8xx_pinmux_setup(da850_nand_pins);
+ ret = davinci_cfg_reg_list(da850_nand_pins);
if (ret)
pr_warning("da850_evm_init: nand mux setup failed: "
"%d\n", ret);
- ret = da8xx_pinmux_setup(da850_nor_pins);
+ ret = davinci_cfg_reg_list(da850_nor_pins);
if (ret)
pr_warning("da850_evm_init: nor mux setup failed: %d\n",
ret);
@@ -441,6 +470,11 @@ struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
},
};
+/* We take advantage of the fact that both defdcdc{2,3} are tied high */
+static struct tps6507x_reg_platform_data tps6507x_platform_data = {
+ .defdcdc_default = true,
+};
+
struct regulator_init_data tps65070_regulator_data[] = {
/* dcdc1 */
{
@@ -466,6 +500,7 @@ struct regulator_init_data tps65070_regulator_data[] = {
},
.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
.consumer_supplies = tps65070_dcdc2_consumers,
+ .driver_data = &tps6507x_platform_data,
},
/* dcdc3 */
@@ -479,6 +514,7 @@ struct regulator_init_data tps65070_regulator_data[] = {
},
.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
.consumer_supplies = tps65070_dcdc3_consumers,
+ .driver_data = &tps6507x_platform_data,
},
/* ldo1 */
@@ -508,10 +544,24 @@ struct regulator_init_data tps65070_regulator_data[] = {
},
};
+static struct touchscreen_init_data tps6507x_touchscreen_data = {
+ .poll_period = 30, /* ms between touch samples */
+ .min_pressure = 0x30, /* minimum pressure to trigger touch */
+ .vref = 0, /* turn off vref when not using A/D */
+ .vendor = 0, /* /sys/class/input/input?/id/vendor */
+ .product = 65070, /* /sys/class/input/input?/id/product */
+ .version = 0x100, /* /sys/class/input/input?/id/version */
+};
+
+static struct tps6507x_board tps_board = {
+ .tps6507x_pmic_init_data = &tps65070_regulator_data[0],
+ .tps6507x_ts_init_data = &tps6507x_touchscreen_data,
+};
+
static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
{
I2C_BOARD_INFO("tps6507x", 0x48),
- .platform_data = &tps65070_regulator_data[0],
+ .platform_data = &tps_board,
},
};
@@ -537,18 +587,18 @@ static int __init da850_evm_config_emac(void)
if (!machine_is_davinci_da850_evm())
return 0;
- cfg_chip3_base = DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG);
+ cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
val = __raw_readl(cfg_chip3_base);
if (rmii_en) {
val |= BIT(8);
- ret = da8xx_pinmux_setup(da850_rmii_pins);
+ ret = davinci_cfg_reg_list(da850_rmii_pins);
pr_info("EMAC: RMII PHY configured, MII PHY will not be"
" functional\n");
} else {
val &= ~BIT(8);
- ret = da8xx_pinmux_setup(da850_cpgmac_pins);
+ ret = davinci_cfg_reg_list(da850_cpgmac_pins);
pr_info("EMAC: MII PHY configured, RMII PHY will not be"
" functional\n");
}
@@ -601,7 +651,7 @@ static __init void da850_evm_init(void)
pr_warning("da850_evm_init: edma registration failed: %d\n",
ret);
- ret = da8xx_pinmux_setup(da850_i2c0_pins);
+ ret = davinci_cfg_reg_list(da850_i2c0_pins);
if (ret)
pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n",
ret);
@@ -618,7 +668,7 @@ static __init void da850_evm_init(void)
ret);
if (HAS_MMC) {
- ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
+ ret = davinci_cfg_reg_list(da850_mmcsd0_pins);
if (ret)
pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
" %d\n", ret);
@@ -654,20 +704,20 @@ static __init void da850_evm_init(void)
__raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
__raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
- ret = da8xx_pinmux_setup(da850_mcasp_pins);
+ ret = davinci_cfg_reg_list(da850_mcasp_pins);
if (ret)
pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
ret);
da8xx_register_mcasp(0, &da850_evm_snd_data);
- ret = da8xx_pinmux_setup(da850_lcdcntl_pins);
+ ret = davinci_cfg_reg_list(da850_lcdcntl_pins);
if (ret)
pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
ret);
/* Handle board specific muxing for LCD here */
- ret = da8xx_pinmux_setup(da850_evm_lcdc_pins);
+ ret = davinci_cfg_reg_list(da850_evm_lcdc_pins);
if (ret)
pr_warning("da850_evm_init: evm specific lcd mux setup "
"failed: %d\n", ret);
@@ -696,6 +746,11 @@ static __init void da850_evm_init(void)
if (ret)
pr_warning("da850_evm_init: cpuidle registration failed: %d\n",
ret);
+
+ ret = da850_register_pm(&da850_pm_device);
+ if (ret)
+ pr_warning("da850_evm_init: suspend registration failed: %d\n",
+ ret);
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
@@ -706,14 +761,6 @@ static int __init da850_evm_console_init(void)
console_initcall(da850_evm_console_init);
#endif
-static __init void da850_evm_irq_init(void)
-{
- struct davinci_soc_info *soc_info = &davinci_soc_info;
-
- cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA850_N_CP_INTC_IRQ,
- soc_info->intc_irq_prios);
-}
-
static void __init da850_evm_map_io(void)
{
da850_init();
@@ -724,7 +771,7 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138 EVM")
.io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
.boot_params = (DA8XX_DDR_BASE + 0x100),
.map_io = da850_evm_map_io,
- .init_irq = da850_evm_irq_init,
+ .init_irq = cp_intc_init,
.timer = &davinci_timer,
.init_machine = da850_evm_init,
MACHINE_END
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-05 01:20:49 +0100