diff options
Diffstat (limited to 'arch/arm/mach-imx/mach-mx31_3ds.c')
| -rw-r--r-- | arch/arm/mach-imx/mach-mx31_3ds.c | 615 |
1 files changed, 0 insertions, 615 deletions
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c deleted file mode 100644 index 23e63d3b4c6a..000000000000 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ /dev/null @@ -1,615 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -#include <linux/delay.h> -#include <linux/dma-mapping.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/platform_device.h> -#include <linux/mfd/mc13783.h> -#include <linux/spi/spi.h> -#include <linux/regulator/machine.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/memory.h> -#include <asm/mach/map.h> - -#include "3ds_debugboard.h" -#include "common.h" -#include "devices-imx31.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx3.h" -#include "ulpi.h" - -static int mx31_3ds_pins[] = { - /* UART1 */ - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, - IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), - /*SPI0*/ - IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_ALT1), - IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_ALT1), - /* SPI 1 */ - MX31_PIN_CSPI2_SCLK__SCLK, - MX31_PIN_CSPI2_MOSI__MOSI, - MX31_PIN_CSPI2_MISO__MISO, - MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI2_SS0__SS0, - MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */ - /* MC13783 IRQ */ - IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), - /* USB OTG reset */ - IOMUX_MODE(MX31_PIN_USB_PWR, IOMUX_CONFIG_GPIO), - /* USB OTG */ - MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, - MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, - MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, - MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, - MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, - MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, - MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, - MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, - MX31_PIN_USBOTG_CLK__USBOTG_CLK, - MX31_PIN_USBOTG_DIR__USBOTG_DIR, - MX31_PIN_USBOTG_NXT__USBOTG_NXT, - MX31_PIN_USBOTG_STP__USBOTG_STP, - /*Keyboard*/ - MX31_PIN_KEY_ROW0_KEY_ROW0, - MX31_PIN_KEY_ROW1_KEY_ROW1, - MX31_PIN_KEY_ROW2_KEY_ROW2, - MX31_PIN_KEY_COL0_KEY_COL0, - MX31_PIN_KEY_COL1_KEY_COL1, - MX31_PIN_KEY_COL2_KEY_COL2, - MX31_PIN_KEY_COL3_KEY_COL3, - /* USB Host 2 */ - IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC), - IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT1), - IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT1), - IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT1), - IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT1), - IOMUX_MODE(MX31_PIN_IOIS16, IOMUX_CONFIG_ALT1), - IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1), - /* USB Host2 reset */ - IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO), - /* I2C1 */ - MX31_PIN_I2C_CLK__I2C1_SCL, - MX31_PIN_I2C_DAT__I2C1_SDA, - /* SDHC1 */ - MX31_PIN_SD1_DATA3__SD1_DATA3, - MX31_PIN_SD1_DATA2__SD1_DATA2, - MX31_PIN_SD1_DATA1__SD1_DATA1, - MX31_PIN_SD1_DATA0__SD1_DATA0, - MX31_PIN_SD1_CLK__SD1_CLK, - MX31_PIN_SD1_CMD__SD1_CMD, - MX31_PIN_GPIO3_1__GPIO3_1, /* Card detect */ - MX31_PIN_GPIO3_0__GPIO3_0, /* OE */ - /* Framebuffer */ - MX31_PIN_LD0__LD0, - MX31_PIN_LD1__LD1, - MX31_PIN_LD2__LD2, - MX31_PIN_LD3__LD3, - MX31_PIN_LD4__LD4, - MX31_PIN_LD5__LD5, - MX31_PIN_LD6__LD6, - MX31_PIN_LD7__LD7, - MX31_PIN_LD8__LD8, - MX31_PIN_LD9__LD9, - MX31_PIN_LD10__LD10, - MX31_PIN_LD11__LD11, - MX31_PIN_LD12__LD12, - MX31_PIN_LD13__LD13, - MX31_PIN_LD14__LD14, - MX31_PIN_LD15__LD15, - MX31_PIN_LD16__LD16, - MX31_PIN_LD17__LD17, - MX31_PIN_VSYNC3__VSYNC3, - MX31_PIN_HSYNC__HSYNC, - MX31_PIN_FPSHIFT__FPSHIFT, - MX31_PIN_CONTRAST__CONTRAST, - /* SSI */ - MX31_PIN_STXD4__STXD4, - MX31_PIN_SRXD4__SRXD4, - MX31_PIN_SCK4__SCK4, - MX31_PIN_SFS4__SFS4, -}; - -/* - * FB support - */ -static const struct fb_videomode fb_modedb[] = { - { /* 480x640 @ 60 Hz */ - .name = "Epson-VGA", - .refresh = 60, - .xres = 480, - .yres = 640, - .pixclock = 41701, - .left_margin = 20, - .right_margin = 41, - .upper_margin = 10, - .lower_margin = 5, - .hsync_len = 20, - .vsync_len = 10, - .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, -}; - -static struct mx3fb_platform_data mx3fb_pdata __initdata = { - .name = "Epson-VGA", - .mode = fb_modedb, - .num_modes = ARRAY_SIZE(fb_modedb), -}; - -/* LCD */ -static struct gpiod_lookup_table mx31_3ds_lcd_gpiod_table = { - .dev_id = "spi0.2", /* Bus 0 chipselect 2 */ - .table = { - /* - * "reset" has IOMUX_TO_GPIO(IOMUX_PIN(88, 28)). - * The macro only shifts 88 to bits 9..16 and then - * mask it and shift it back. The GPIO number is 88. - * 88 is 2*32+24 - */ - GPIO_LOOKUP("imx31-gpio.2", 24, "reset", GPIO_ACTIVE_HIGH), - /* - * Same reasoning as above for - * IOMUX_TO_GPIO(IOMUX_PIN(89, 27), pin 89 is 2*32+25. - */ - GPIO_LOOKUP("imx31-gpio.2", 25, "enable", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -/* - * Support for SD card slot in personality board - */ -#define MX31_3DS_GPIO_SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_GPIO3_1) -#define MX31_3DS_GPIO_SDHC1_BE IOMUX_TO_GPIO(MX31_PIN_GPIO3_0) - -static struct gpio mx31_3ds_sdhc1_gpios[] = { - { MX31_3DS_GPIO_SDHC1_CD, GPIOF_IN, "sdhc1-card-detect" }, - { MX31_3DS_GPIO_SDHC1_BE, GPIOF_OUT_INIT_LOW, "sdhc1-bus-en" }, -}; - -static int mx31_3ds_sdhc1_init(struct device *dev, - irq_handler_t detect_irq, - void *data) -{ - int ret; - - ret = gpio_request_array(mx31_3ds_sdhc1_gpios, - ARRAY_SIZE(mx31_3ds_sdhc1_gpios)); - if (ret) { - pr_warn("Unable to request the SD/MMC GPIOs.\n"); - return ret; - } - - ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), - detect_irq, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - "sdhc1-detect", data); - if (ret) { - pr_warn("Unable to request the SD/MMC card-detect IRQ.\n"); - goto gpio_free; - } - - return 0; - -gpio_free: - gpio_free_array(mx31_3ds_sdhc1_gpios, - ARRAY_SIZE(mx31_3ds_sdhc1_gpios)); - return ret; -} - -static void mx31_3ds_sdhc1_exit(struct device *dev, void *data) -{ - free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), data); - gpio_free_array(mx31_3ds_sdhc1_gpios, - ARRAY_SIZE(mx31_3ds_sdhc1_gpios)); -} - -static void mx31_3ds_sdhc1_setpower(struct device *dev, unsigned int vdd) -{ - /* - * While the voltage stuff is done by the driver, activate the - * Buffer Enable Pin only if there is a card in slot to fix the card - * voltage issue caused by bi-directional chip TXB0108 on 3Stack. - * Done here because at this stage we have for sure a debounced value - * of the presence of the card, showed by the value of vdd. - * 7 == ilog2(MMC_VDD_165_195) - */ - if (vdd > 7) - gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 1); - else - gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 0); -} - -static struct imxmmc_platform_data sdhc1_pdata = { - .init = mx31_3ds_sdhc1_init, - .exit = mx31_3ds_sdhc1_exit, - .setpower = mx31_3ds_sdhc1_setpower, -}; - -/* - * Matrix keyboard - */ - -static const uint32_t mx31_3ds_keymap[] = { - KEY(0, 0, KEY_UP), - KEY(0, 1, KEY_DOWN), - KEY(1, 0, KEY_RIGHT), - KEY(1, 1, KEY_LEFT), - KEY(1, 2, KEY_ENTER), - KEY(2, 0, KEY_F6), - KEY(2, 1, KEY_F8), - KEY(2, 2, KEY_F9), - KEY(2, 3, KEY_F10), -}; - -static const struct matrix_keymap_data mx31_3ds_keymap_data __initconst = { - .keymap = mx31_3ds_keymap, - .keymap_size = ARRAY_SIZE(mx31_3ds_keymap), -}; - -/* Regulators */ -static struct regulator_init_data pwgtx_init = { - .constraints = { - .boot_on = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data gpo_init = { - .constraints = { - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_consumer_supply vmmc2_consumers[] = { - REGULATOR_SUPPLY("vmmc", "imx31-mmc.0"), -}; - -static struct regulator_init_data vmmc2_init = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3000000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(vmmc2_consumers), - .consumer_supplies = vmmc2_consumers, -}; - -static struct regulator_consumer_supply vmmc1_consumers[] = { - REGULATOR_SUPPLY("vcore", "spi0.0"), -}; - -static struct regulator_init_data vmmc1_init = { - .constraints = { - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers), - .consumer_supplies = vmmc1_consumers, -}; - -static struct regulator_consumer_supply vgen_consumers[] = { - REGULATOR_SUPPLY("vdd", "spi0.0"), -}; - -static struct regulator_init_data vgen_init = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(vgen_consumers), - .consumer_supplies = vgen_consumers, -}; - -static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = { - { - .id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */ - .init_data = &pwgtx_init, - }, { - .id = MC13783_REG_PWGT2SPI, /* Power Gate for L2 Cache. */ - .init_data = &pwgtx_init, - }, { - - .id = MC13783_REG_GPO1, /* Turn on 1.8V */ - .init_data = &gpo_init, - }, { - .id = MC13783_REG_GPO3, /* Turn on 3.3V */ - .init_data = &gpo_init, - }, { - .id = MC13783_REG_VMMC2, /* Power MMC/SD, WiFi/Bluetooth. */ - .init_data = &vmmc2_init, - }, { - .id = MC13783_REG_VMMC1, /* Power LCD, CMOS, FM, GPS, Accel. */ - .init_data = &vmmc1_init, - }, { - .id = MC13783_REG_VGEN, /* Power LCD */ - .init_data = &vgen_init, - }, -}; - -/* MC13783 */ -static struct mc13xxx_codec_platform_data mx31_3ds_codec = { - .dac_ssi_port = MC13783_SSI1_PORT, - .adc_ssi_port = MC13783_SSI1_PORT, -}; - -static struct mc13xxx_platform_data mc13783_pdata = { - .regulators = { - .regulators = mx31_3ds_regulators, - .num_regulators = ARRAY_SIZE(mx31_3ds_regulators), - }, - .codec = &mx31_3ds_codec, - .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC | MC13XXX_USE_CODEC, - -}; - -static struct imx_ssi_platform_data mx31_3ds_ssi_pdata = { - .flags = IMX_SSI_DMA | IMX_SSI_NET, -}; - -static struct spi_board_info mx31_3ds_spi_devs[] __initdata = { - { - .modalias = "mc13783", - .max_speed_hz = 1000000, - .bus_num = 1, - .chip_select = 2, /* SS2 */ - .platform_data = &mc13783_pdata, - /* irq number is run-time assigned */ - .mode = SPI_CS_HIGH, - }, { - .modalias = "l4f00242t03", - .max_speed_hz = 5000000, - .bus_num = 0, - .chip_select = 2, /* SS2 */ - }, -}; - -/* - * NAND Flash - */ -static const struct mxc_nand_platform_data -mx31_3ds_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, -#ifdef CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT - .flash_bbt = 1, -#endif -}; - -/* - * USB OTG - */ - -#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - -#define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR) -#define USBH2_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_BYP) - -static int mx31_3ds_usbotg_init(void) -{ - int err; - - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); - - err = gpio_request(USBOTG_RST_B, "otgusb-reset"); - if (err) { - pr_err("Failed to request the USB OTG reset gpio\n"); - return err; - } - - err = gpio_direction_output(USBOTG_RST_B, 0); - if (err) { - pr_err("Failed to drive the USB OTG reset gpio\n"); - goto usbotg_free_reset; - } - - mdelay(1); - gpio_set_value(USBOTG_RST_B, 1); - return 0; - -usbotg_free_reset: - gpio_free(USBOTG_RST_B); - return err; -} - -static int mx31_3ds_otg_init(struct platform_device *pdev) -{ - return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); -} - -static int mx31_3ds_host2_init(struct platform_device *pdev) -{ - int err; - - mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_PC_VS2, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_PC_BVD1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_PC_BVD2, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_PC_RST, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_IOIS16, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_PC_RW_B, USB_PAD_CFG); - - err = gpio_request(USBH2_RST_B, "usbh2-reset"); - if (err) { - pr_err("Failed to request the USB Host 2 reset gpio\n"); - return err; - } - - err = gpio_direction_output(USBH2_RST_B, 0); - if (err) { - pr_err("Failed to drive the USB Host 2 reset gpio\n"); - goto usbotg_free_reset; - } - - mdelay(1); - gpio_set_value(USBH2_RST_B, 1); - - mdelay(10); - - return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); - -usbotg_free_reset: - gpio_free(USBH2_RST_B); - return err; -} - -static struct mxc_usbh_platform_data otg_pdata __initdata = { - .init = mx31_3ds_otg_init, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static struct mxc_usbh_platform_data usbh2_pdata __initdata = { - .init = mx31_3ds_host2_init, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static const struct fsl_usb2_platform_data usbotg_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, -}; - -static bool otg_mode_host __initdata; - -static int __init mx31_3ds_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", mx31_3ds_otg_mode); - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct imxi2c_platform_data mx31_3ds_i2c0_data __initconst = { - .bitrate = 100000, -}; - -static void __init mx31_3ds_init(void) -{ - imx31_soc_init(); - - /* Configure SPI1 IOMUX */ - mxc_iomux_set_gpr(MUX_PGP_CSPI_BB, true); - - mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), - "mx31_3ds"); - - imx31_add_imx_uart0(&uart_pdata); - imx31_add_mxc_nand(&mx31_3ds_nand_board_info); - - imx31_add_spi_imx1(NULL); - - imx31_add_imx_keypad(&mx31_3ds_keymap_data); - - imx31_add_imx2_wdt(); - imx31_add_imx_i2c0(&mx31_3ds_i2c0_data); - - imx31_add_spi_imx0(NULL); - imx31_add_ipu_core(); - imx31_add_mx3_sdc_fb(&mx3fb_pdata); - - imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata); - - imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); -} - -static void __init mx31_3ds_late(void) -{ - gpiod_add_lookup_table(&mx31_3ds_lcd_gpiod_table); - mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); - spi_register_board_info(mx31_3ds_spi_devs, - ARRAY_SIZE(mx31_3ds_spi_devs)); - - mx31_3ds_usbotg_init(); - if (otg_mode_host) { - otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - if (otg_pdata.otg) - imx31_add_mxc_ehci_otg(&otg_pdata); - } - usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT); - if (usbh2_pdata.otg) - imx31_add_mxc_ehci_hs(2, &usbh2_pdata); - - if (!otg_mode_host) - imx31_add_fsl_usb2_udc(&usbotg_pdata); - - if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1))) - printk(KERN_WARNING "Init of the debug board failed, all " - "devices on the debug board are unusable.\n"); - - imx31_add_mxc_mmc(0, &sdhc1_pdata); -} - -static void __init mx31_3ds_timer_init(void) -{ - mx31_clocks_init(26000000); -} - -MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") - /* Maintainer: Freescale Semiconductor, Inc. */ - .atag_offset = 0x100, - .map_io = mx31_map_io, - .init_early = imx31_init_early, - .init_irq = mx31_init_irq, - .init_time = mx31_3ds_timer_init, - .init_machine = mx31_3ds_init, - .init_late = mx31_3ds_late, - .restart = mxc_restart, -MACHINE_END |