diff options
Diffstat (limited to 'arch/arm/mach-imx')
33 files changed, 607 insertions, 456 deletions
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 29a8af6922a8..7a6e6f710068 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -4,13 +4,14 @@ config ARCH_MXC select ARM_CPU_SUSPEND if PM select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR if !ZBOOT_ROM - select CLKDEV_LOOKUP select CLKSRC_MMIO + select COMMON_CLK select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7 select MULTI_IRQ_HANDLER + select SOC_BUS select SPARSE_IRQ select USE_OF help @@ -24,7 +25,7 @@ config MXC_IRQ_PRIOR help Select this if you want to use prioritized IRQ handling. This feature prevents higher priority ISR to be interrupted - by lower priority IRQ even IRQF_DISABLED flag is not set. + by lower priority IRQ. This may be useful in embedded applications, where are strong requirements for timing. Say N here, unless you have a specialized requirement. @@ -92,14 +93,12 @@ config MACH_MX27 config SOC_IMX1 bool select ARCH_MX1 - select COMMON_CLK select CPU_ARM920T select IMX_HAVE_IOMUX_V1 select MXC_AVIC config SOC_IMX21 bool - select COMMON_CLK select CPU_ARM926T select IMX_HAVE_IOMUX_V1 select MXC_AVIC @@ -108,7 +107,6 @@ config SOC_IMX25 bool select ARCH_MX25 select ARCH_MXC_IOMUX_V3 - select COMMON_CLK select CPU_ARM926T select MXC_AVIC @@ -116,7 +114,6 @@ config SOC_IMX27 bool select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP - select COMMON_CLK select CPU_ARM926T select IMX_HAVE_IOMUX_V1 select MACH_MX27 @@ -124,7 +121,6 @@ config SOC_IMX27 config SOC_IMX31 bool - select COMMON_CLK select CPU_V6 select IMX_HAVE_PLATFORM_MXC_RNGA select MXC_AVIC @@ -133,7 +129,6 @@ config SOC_IMX31 config SOC_IMX35 bool select ARCH_MXC_IOMUX_V3 - select COMMON_CLK select CPU_V6K select HAVE_EPIT select MXC_AVIC @@ -144,7 +139,6 @@ config SOC_IMX5 select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARCH_MXC_IOMUX_V3 - select COMMON_CLK select CPU_V7 select MXC_TZIC @@ -791,7 +785,6 @@ config SOC_IMX6Q select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 select ARM_GIC - select COMMON_CLK select CPU_V7 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP @@ -801,6 +794,8 @@ config SOC_IMX6Q select HAVE_IMX_SRC select HAVE_SMP select MFD_SYSCON + select MIGHT_HAVE_PCI + select PCI_DOMAINS if PCI select PINCTRL select PINCTRL_IMX6Q select PL310_ERRATA_588369 if CACHE_PL310 diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 5383c589ad71..1789e2b31903 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -102,6 +102,8 @@ obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o ifeq ($(CONFIG_PM),y) obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o +# i.MX6SL reuses i.MX6Q code +obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o endif # i.MX5 based machines diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index ad3b755abb78..4a40bbb46183 100644 --- a/arch/arm/mach-imx/anatop.c +++ b/arch/arm/mach-imx/anatop.c @@ -16,6 +16,7 @@ #include <linux/mfd/syscon.h> #include <linux/regmap.h> #include "common.h" +#include "hardware.h" #define REG_SET 0x4 #define REG_CLR 0x8 @@ -26,6 +27,7 @@ #define ANADIG_USB1_CHRG_DETECT 0x1b0 #define ANADIG_USB2_CHRG_DETECT 0x210 #define ANADIG_DIGPROG 0x260 +#define ANADIG_DIGPROG_IMX6SL 0x280 #define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x40000 #define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000 @@ -76,21 +78,38 @@ static void imx_anatop_usb_chrg_detect_disable(void) BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); } -u32 imx_anatop_get_digprog(void) +void __init imx_init_revision_from_anatop(void) { struct device_node *np; void __iomem *anatop_base; - static u32 digprog; - - if (digprog) - return digprog; + unsigned int revision; + u32 digprog; + u16 offset = ANADIG_DIGPROG; np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); anatop_base = of_iomap(np, 0); WARN_ON(!anatop_base); - digprog = readl_relaxed(anatop_base + ANADIG_DIGPROG); + if (of_device_is_compatible(np, "fsl,imx6sl-anatop")) + offset = ANADIG_DIGPROG_IMX6SL; + digprog = readl_relaxed(anatop_base + offset); + iounmap(anatop_base); + + switch (digprog & 0xff) { + case 0: + revision = IMX_CHIP_REVISION_1_0; + break; + case 1: + revision = IMX_CHIP_REVISION_1_1; + break; + case 2: + revision = IMX_CHIP_REVISION_1_2; + break; + default: + revision = IMX_CHIP_REVISION_UNKNOWN; + } - return digprog; + mxc_set_cpu_type(digprog >> 16 & 0xff); + imx_set_soc_revision(revision); } void __init imx_anatop_init(void) diff --git a/arch/arm/mach-imx/clk-fixup-mux.c b/arch/arm/mach-imx/clk-fixup-mux.c index deb4b8093b30..0d40b35c557c 100644 --- a/arch/arm/mach-imx/clk-fixup-mux.c +++ b/arch/arm/mach-imx/clk-fixup-mux.c @@ -90,6 +90,7 @@ struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg, init.ops = &clk_fixup_mux_ops; init.parent_names = parents; init.num_parents = num_parents; + init.flags = 0; fixup_mux->mux.reg = reg; fixup_mux->mux.shift = shift; diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index c3cfa4116dc0..c6b40f386786 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -285,7 +285,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL); clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc"); clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL); - clk_register_clkdev(clk[cpu_div], NULL, "cpufreq-cpu0.0"); + clk_register_clkdev(clk[cpu_div], NULL, "cpu0"); clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL); mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 1a56a3319997..ce37af26ff8c 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -11,8 +11,12 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/clkdev.h> +#include <linux/clk-provider.h> #include <linux/of.h> #include <linux/err.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include "crm-regs-imx5.h" #include "clk.h" @@ -131,8 +135,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, { int i; - of_clk_init(NULL); - clk[dummy] = imx_clk_fixed("dummy", 0); clk[ckil] = imx_obtain_fixed_clock("ckil", rate_ckil); clk[osc] = imx_obtain_fixed_clock("osc", rate_osc); @@ -328,7 +330,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1"); clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2"); clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); - clk_register_clkdev(clk[cpu_podf], NULL, "cpufreq-cpu0.0"); + clk_register_clkdev(clk[cpu_podf], NULL, "cpu0"); clk_register_clkdev(clk[iim_gate], "iim", NULL); clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.0"); clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.1"); @@ -397,7 +399,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, mx51_spdif_xtal_sel, ARRAY_SIZE(mx51_spdif_xtal_sel)); clk[spdif1_sel] = imx_clk_mux("spdif1_sel", MXC_CCM_CSCMR2, 2, 2, spdif_sel, ARRAY_SIZE(spdif_sel)); - clk[spdif1_pred] = imx_clk_divider("spdif1_podf", "spdif1_sel", MXC_CCM_CDCDR, 16, 3); + clk[spdif1_pred] = imx_clk_divider("spdif1_pred", "spdif1_sel", MXC_CCM_CDCDR, 16, 3); clk[spdif1_podf] = imx_clk_divider("spdif1_podf", "spdif1_pred", MXC_CCM_CDCDR, 9, 6); clk[spdif1_com_sel] = imx_clk_mux("spdif1_com_sel", MXC_CCM_CSCMR2, 5, 1, mx51_spdif1_com_sel, ARRAY_SIZE(mx51_spdif1_com_sel)); @@ -465,12 +467,17 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, return 0; } -int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, - unsigned long rate_ckih1, unsigned long rate_ckih2) +static void __init mx51_clocks_init_dt(struct device_node *np) { - int i; + mx51_clocks_init(0, 0, 0, 0); +} +CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init_dt); + +static void __init mx53_clocks_init(struct device_node *np) +{ + int i, irq; unsigned long r; - struct device_node *np; + void __iomem *base; clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE); clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE); @@ -529,12 +536,11 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, pr_err("i.MX53 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); - np = of_find_compatible_node(NULL, NULL, "fsl,imx53-ccm"); clk_data.clks = clk; clk_data.clk_num = ARRAY_SIZE(clk); of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2); + mx5_clocks_common_init(0, 0, 0, 0); clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0"); clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2"); @@ -557,9 +563,6 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_set_rate(clk[esdhc_a_podf], 200000000); clk_set_rate(clk[esdhc_b_podf], 200000000); - /* System timer */ - mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT); - clk_prepare_enable(clk[iim_gate]); imx_print_silicon_rev("i.MX53", mx53_revision()); clk_disable_unprepare(clk[iim_gate]); @@ -567,15 +570,10 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, r = clk_round_rate(clk[usboh3_per_gate], 54000000); clk_set_rate(clk[usboh3_per_gate], r); - return 0; -} - -int __init mx51_clocks_init_dt(void) -{ - return mx51_clocks_init(0, 0, 0, 0); -} - -int __init mx53_clocks_init_dt(void) -{ - return mx53_clocks_init(0, 0, 0, 0); + np = of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt"); + base = of_iomap(np, 0); + WARN_ON(!base); + irq = irq_of_parse_and_map(np, 0); + mxc_timer_init(base, irq); } +CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 9181a241d3a8..04cfd0fcb0e5 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -14,7 +14,6 @@ #include <linux/types.h> #include <linux/clk.h> #include <linux/clkdev.h> -#include <linux/delay.h> #include <linux/err.h> #include <linux/io.h> #include <linux/of.h> @@ -25,155 +24,6 @@ #include "common.h" #include "hardware.h" -#define CCR 0x0 -#define BM_CCR_WB_COUNT (0x7 << 16) -#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21) -#define BM_CCR_RBC_EN (0x1 << 27) - -#define CCGR0 0x68 -#define CCGR1 0x6c -#define CCGR2 0x70 -#define CCGR3 0x74 -#define CCGR4 0x78 -#define CCGR5 0x7c -#define CCGR6 0x80 -#define CCGR7 0x84 - -#define CLPCR 0x54 -#define BP_CLPCR_LPM 0 -#define BM_CLPCR_LPM (0x3 << 0) -#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2) -#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) -#define BM_CLPCR_SBYOS (0x1 << 6) -#define BM_CLPCR_DIS_REF_OSC (0x1 << 7) -#define BM_CLPCR_VSTBY (0x1 << 8) -#define BP_CLPCR_STBY_COUNT 9 -#define BM_CLPCR_STBY_COUNT (0x3 << 9) -#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11) -#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16) -#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17) -#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19) -#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21) -#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22) -#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23) -#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24) -#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25) -#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26) -#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27) - -#define CGPR 0x64 -#define BM_CGPR_CHICKEN_BIT (0x1 << 17) - -static void __iomem *ccm_base; - -void imx6q_set_chicken_bit(void) -{ - u32 val = readl_relaxed(ccm_base + CGPR); - - val |= BM_CGPR_CHICKEN_BIT; - writel_relaxed(val, ccm_base + CGPR); -} - -static void imx6q_enable_rbc(bool enable) -{ - u32 val; - static bool last_rbc_mode; - - if (last_rbc_mode == enable) - return; - /* - * need to mask all interrupts in GPC before - * operating RBC configurations - */ - imx_gpc_mask_all(); - - /* configure RBC enable bit */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_RBC_EN; - val |= enable ? BM_CCR_RBC_EN : 0; - writel_relaxed(val, ccm_base + CCR); - - /* configure RBC count */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_RBC_BYPASS_COUNT; - val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0; - writel(val, ccm_base + CCR); - - /* - * need to delay at least 2 cycles of CKIL(32K) - * due to hardware design requirement, which is - * ~61us, here we use 65us for safe - */ - udelay(65); - - /* restore GPC interrupt mask settings */ - imx_gpc_restore_all(); - - last_rbc_mode = enable; -} - -static void imx6q_enable_wb(bool enable) -{ - u32 val; - static bool last_wb_mode; - - if (last_wb_mode == enable) - return; - - /* configure well bias enable bit */ - val = readl_relaxed(ccm_base + CLPCR); - val &= ~BM_CLPCR_WB_PER_AT_LPM; - val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0; - writel_relaxed(val, ccm_base + CLPCR); - - /* configure well bias count */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_WB_COUNT; - val |= enable ? BM_CCR_WB_COUNT : 0; - writel_relaxed(val, ccm_base + CCR); - - last_wb_mode = enable; -} - -int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) -{ - u32 val = readl_relaxed(ccm_base + CLPCR); - - val &= ~BM_CLPCR_LPM; - switch (mode) { - case WAIT_CLOCKED: - imx6q_enable_wb(false); - imx6q_enable_rbc(false); - break; - case WAIT_UNCLOCKED: - val |= 0x1 << BP_CLPCR_LPM; - val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM; - break; - case STOP_POWER_ON: - val |= 0x2 << BP_CLPCR_LPM; - break; - case WAIT_UNCLOCKED_POWER_OFF: - val |= 0x1 << BP_CLPCR_LPM; - val &= ~BM_CLPCR_VSTBY; - val &= ~BM_CLPCR_SBYOS; - break; - case STOP_POWER_OFF: - val |= 0x2 << BP_CLPCR_LPM; - val |= 0x3 << BP_CLPCR_STBY_COUNT; - val |= BM_CLPCR_VSTBY; - val |= BM_CLPCR_SBYOS; - imx6q_enable_wb(true); - imx6q_enable_rbc(true); - break; - default: - return -EINVAL; - } - - writel_relaxed(val, ccm_base + CLPCR); - - return 0; -} - static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; @@ -182,7 +32,7 @@ static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", }; -static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", }; +static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", }; static const char *gpu_axi_sels[] = { "axi", "ahb", }; static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", }; static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; @@ -196,7 +46,7 @@ static const char *ipu2_di0_sels[] = { "ipu2_di0_pre", "dummy", "dummy", "ldb_di static const char *ipu2_di1_sels[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", }; static const char *pcie_axi_sels[] = { "axi", "ahb", }; -static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", }; +static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", }; static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", }; static const char *emi_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", }; @@ -205,7 +55,7 @@ static const char *vdo_axi_sels[] = { "axi", "ahb", }; static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div", "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0", - "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", }; + "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio_div", }; static const char *cko2_sels[] = { "mmdc_ch0_axi", "mmdc_ch1_axi", "usdhc4", "usdhc1", "gpu2d_axi", "dummy", "ecspi_root", "gpu3d_axi", @@ -217,6 +67,11 @@ static const char *cko2_sels[] = { "uart_serial", "spdif", "asrc", "hsi_tx", }; static const char *cko_sels[] = { "cko1", "cko2", }; +static const char *lvds_sels[] = { + "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", + "pll4_audio", "pll5_video", "pll8_mlb", "enet_ref", + "pcie_ref", "sata_ref", +}; enum mx6q_clks { dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m, @@ -251,7 +106,8 @@ enum mx6q_clks { ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate, usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow, - spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, clk_max + spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div, + lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, clk_max }; static struct clk *clk[clk_max]; @@ -266,13 +122,14 @@ static struct clk_div_table clk_enet_ref_table[] = { { .val = 1, .div = 10, }, { .val = 2, .div = 5, }, { .val = 3, .div = 4, }, + { /* sentinel */ } }; static struct clk_div_table post_div_table[] = { { .val = 2, .div = 1, }, { .val = 1, .div = 2, }, { .val = 0, .div = 4, }, - { } + { /* sentinel */ } }; static struct clk_div_table video_div_table[] = { @@ -280,7 +137,7 @@ static struct clk_div_table video_div_table[] = { { .val = 1, .div = 2, }, { .val = 2, .div = 1, }, { .val = 3, .div = 4, }, - { } + { /* sentinel */ } }; static void __init imx6q_clocks_init(struct device_node *ccm_node) @@ -300,7 +157,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) WARN_ON(!base); /* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */ - if (cpu_is_imx6q() && imx6q_revision() == IMX_CHIP_REVISION_1_0) { + if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) { post_div_table[1].div = 1; post_div_table[2].div = 1; video_div_table[1].div = 1; @@ -342,6 +199,18 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) base + 0xe0, 0, 2, 0, clk_enet_ref_table, &imx_ccm_lock); + clk[lvds1_sel] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels)); + clk[lvds2_sel] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels)); + + /* + * lvds1_gate and lvds2_gate are pseudo-gates. Both can be + * independently configured as clock inputs or outputs. We treat + * the "output_enable" bit as a gate, even though it's really just + * enabling clock output. + */ + clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10); + clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11); + /* name parent_name reg idx */ clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); @@ -359,13 +228,15 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[twd] = imx_clk_fixed_factor("twd", "arm", 1, 2); clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); + clk[pll4_audio_div] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock); clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); np = ccm_node; base = of_iomap(np, 0); WARN_ON(!base); - ccm_base = base; + + imx6q_pm_set_ccm_base(base); /* name reg shift width parent_names num_parents */ clk[step] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); @@ -428,7 +299,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[asrc_podf] = imx_clk_divider("asrc_podf", "asrc_pred", base + 0x30, 9, 3); clk[spdif_pred] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3); clk[spdif_podf] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3); - clk[can_root] = imx_clk_divider("can_root", "pll3_usb_otg", base + 0x20, 2, 6); + clk[can_root] = imx_clk_divider("can_root", "pll3_60m", base + 0x20, 2, 6); clk[ecspi_root] = imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6); clk[gpu2d_core_podf] = imx_clk_divider("gpu2d_core_podf", "gpu2d_core_sel", base + 0x18, 23, 3); clk[gpu3d_core_podf] = imx_clk_divider("gpu3d_core_podf", "gpu3d_core_sel", base + 0x18, 26, 3); @@ -573,7 +444,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL); clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL); - if ((imx6q_revision() != IMX_CHIP_REVISION_1_0) || cpu_is_imx6dl()) { + if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) || + cpu_is_imx6dl()) { clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]); clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]); } @@ -603,8 +475,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) if (ret) pr_warn("failed to set up CLKO: %d\n", ret); - /* Set initial power mode */ - imx6q_set_lpm(WAIT_CLOCKED); + /* All existing boards with PCIe use LVDS1 */ + if (IS_ENABLED(CONFIG_PCI_IMX6)) + clk_set_parent(clk[lvds1_sel], clk[sata_ref]); np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c index a5c3c5d21aee..c0c4ef55e35b 100644 --- a/arch/arm/mach-imx/clk-imx6sl.c +++ b/arch/arm/mach-imx/clk-imx6sl.c @@ -127,6 +127,9 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) base = of_iomap(np, 0); WARN_ON(!base); + /* Reuse imx6q pm code */ + imx6q_pm_set_ccm_base(base); + /* name reg shift width parent_names num_parents */ clks[IMX6SL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); clks[IMX6SL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c index f6640b6a7b31..61364050fccd 100644 --- a/arch/arm/mach-imx/clk-pllv3.c +++ b/arch/arm/mach-imx/clk-pllv3.c @@ -12,6 +12,7 @@ #include <linux/clk.h> #include <linux/clk-provider.h> +#include <linux/delay.h> #include <linux/io.h> #include <linux/slab.h> #include <linux/jiffies.h> @@ -45,33 +46,49 @@ struct clk_pllv3 { #define to_clk_pllv3(_hw) container_of(_hw, struct clk_pllv3, hw) +static int clk_pllv3_wait_lock(struct clk_pllv3 *pll) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(10); + u32 val = readl_relaxed(pll->base) & BM_PLL_POWER; + + /* No need to wait for lock when pll is not powered up */ + if ((pll->powerup_set && !val) || (!pll->powerup_set && val)) + return 0; + + /* Wait for PLL to lock */ + do { + if (readl_relaxed(pll->base) & BM_PLL_LOCK) + break; + if (time_after(jiffies, timeout)) + break; + usleep_range(50, 500); + } while (1); + + return readl_relaxed(pll->base) & BM_PLL_LOCK ? 0 : -ETIMEDOUT; +} + static int clk_pllv3_prepare(struct clk_hw *hw) { struct clk_pllv3 *pll = to_clk_pllv3(hw); - unsigned long timeout; u32 val; + int ret; val = readl_relaxed(pll->base); - val &= ~BM_PLL_BYPASS; if (pll->powerup_set) val |= BM_PLL_POWER; else val &= ~BM_PLL_POWER; writel_relaxed(val, pll->base); - timeout = jiffies + msecs_to_jiffies(10); - /* Wait for PLL to lock */ - do { - if (readl_relaxed(pll->base) & BM_PLL_LOCK) - break; - if (time_after(jiffies, timeout)) - break; - } while (1); + ret = clk_pllv3_wait_lock(pll); + if (ret) + return ret; - if (readl_relaxed(pll->base) & BM_PLL_LOCK) - return 0; - else - return -ETIMEDOUT; + val = readl_relaxed(pll->base); + val &= ~BM_PLL_BYPASS; + writel_relaxed(val, pll->base); + + return 0; } static void clk_pllv3_unprepare(struct clk_hw *hw) @@ -146,7 +163,7 @@ static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate, val |= div; writel_relaxed(val, pll->base); - return 0; + return clk_pllv3_wait_lock(pll); } static const struct clk_ops clk_pllv3_ops = { @@ -202,7 +219,7 @@ static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate, val |= div; writel_relaxed(val, pll->base); - return 0; + return clk_pllv3_wait_lock(pll); } static const struct clk_ops clk_pllv3_sys_ops = { @@ -276,7 +293,7 @@ static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate, writel_relaxed(mfn, pll->base + PLL_NUM_OFFSET); writel_relaxed(mfd, pll->base + PLL_DENOM_OFFSET); - return 0; + return clk_pllv3_wait_lock(pll); } static const struct clk_ops clk_pllv3_av_ops = { diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 4517fd760bfc..24a7899e36a8 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -13,74 +13,73 @@ #include <linux/reboot.h> +struct irq_data; struct platform_device; struct pt_regs; struct clk; enum mxc_cpu_pwr_mode; -extern void mx1_map_io(void); -extern void mx21_map_io(void); -extern void mx25_map_io(void); -extern void mx27_map_io(void); -extern void mx31_map_io(void); -extern void mx35_map_io(void); -extern void mx51_map_io(void); -extern void mx53_map_io(void); -extern void imx1_init_early(void); -extern void imx21_init_early(void); -extern void imx25_init_early(void); -extern void imx27_init_early(void); -extern void imx31_init_early(void); -extern void imx35_init_early(void); -extern void imx51_init_early(void); -extern void imx53_init_early(void); -extern void mxc_init_irq(void __iomem *); -extern void tzic_init_irq(void __iomem *); -extern void mx1_init_irq(void); -extern void mx21_init_irq(void); -extern void mx25_init_irq(void); -extern void mx27_init_irq(void); -extern void mx31_init_irq(void); -extern void mx35_init_irq(void); -extern void mx51_init_irq(void); -extern void mx53_init_irq(void); -extern void imx1_soc_init(void); -extern void imx21_soc_init(void); -extern void imx25_soc_init(void); -extern void imx27_soc_init(void); -extern void imx31_soc_init(void); -extern void imx35_soc_init(void); -extern void imx51_soc_init(void); -extern void imx51_init_late(void); -extern void imx53_init_late(void); -extern void epit_timer_init(void __iomem *base, int irq); -extern void mxc_timer_init(void __iomem *, int); -extern int mx1_clocks_init(unsigned long fref); -extern int mx21_clocks_init(unsigned long lref, unsigned long fref); -extern int mx25_clocks_init(void); -extern int mx27_clocks_init(unsigned long fref); -extern int mx31_clocks_init(unsigned long fref); -extern int mx35_clocks_init(void); -extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, +void mx1_map_io(void); +void mx21_map_io(void); +void mx25_map_io(void); +void mx27_map_io(void); +void mx31_map_io(void); +void mx35_map_io(void); +void mx51_map_io(void); +void mx53_map_io(void); +void imx1_init_early(void); +void imx21_init_early(void); +void imx25_init_early(void); +void imx27_init_early(void); +void imx31_init_early(void); +void imx35_init_early(void); +void imx51_init_early(void); +void imx53_init_early(void); +void mxc_init_irq(void __iomem *); +void tzic_init_irq(void __iomem *); +void mx1_init_irq(void); +void mx21_init_irq(void); +void mx25_init_irq(void); +void mx27_init_irq(void); +void mx31_init_irq(void); +void mx35_init_irq(void); +void mx51_init_irq(void); +void mx53_init_irq(void); +void imx1_soc_init(void); +void imx21_soc_init(void); +void imx25_soc_init(void); +void imx27_soc_init(void); +void imx31_soc_init(void); +void imx35_soc_init(void); +void imx51_soc_init(void); +void imx51_init_late(void); +void imx53_init_late(void); +void epit_timer_init(void __iomem *base, int irq); +void mxc_timer_init(void __iomem *, int); +int mx1_clocks_init(unsigned long fref); +int mx21_clocks_init(unsigned long lref, unsigned long fref); +int mx25_clocks_init(void); +int mx27_clocks_init(unsigned long fref); +int mx31_clocks_init(unsigned long fref); +int mx35_clocks_init(void); +int mx51_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); -extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, - unsigned long ckih1, unsigned long ckih2); -extern int mx25_clocks_init_dt(void); -extern int mx27_clocks_init_dt(void); -extern int mx31_clocks_init_dt(void); -extern int mx51_clocks_init_dt(void); -extern int mx53_clocks_init_dt(void); -extern struct platform_device *mxc_register_gpio(char *name, int id, +int mx25_clocks_init_dt(void); +int mx27_clocks_init_dt(void); +int mx31_clocks_init_dt(void); +struct platform_device *mxc_register_gpio(char *name, int id, resource_size_t iobase, resource_size_t iosize, int irq, int irq_high); -extern void mxc_set_cpu_type(unsigned int type); -extern void mxc_restart(enum reboot_mode, const char *); -extern void mxc_arch_reset_init(void __iomem *); -extern void mxc_arch_reset_init_dt(void); -extern int mx53_revision(void); -extern int imx6q_revision(void); -extern int mx53_display_revision(void); -extern void imx_set_aips(void __iomem *); -extern int mxc_device_init(void); +void mxc_set_cpu_type(unsigned int type); +void mxc_restart(enum reboot_mode, const char *); +void mxc_arch_reset_init(void __iomem *); +void mxc_arch_reset_init_dt(void); +int mx53_revision(void); +void imx_set_aips(void __iomem *); +int mxc_device_init(void); +void imx_set_soc_revision(unsigned int rev); +unsigned int imx_get_soc_revision(void); +void imx_init_revision_from_anatop(void); +struct device *imx_soc_device_init(void); enum mxc_cpu_pwr_mode { WAIT_CLOCKED, /* wfi only */ @@ -97,8 +96,8 @@ enum mx3_cpu_pwr_mode { MX3_SLEEP, }; -extern void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode); -extern void imx_print_silicon_rev(const char *cpu, int srev); +void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode); +void imx_print_silicon_rev(const char *cpu, int srev); void avic_handle_irq(struct pt_regs *); void tzic_handle_irq(struct pt_regs *); @@ -112,54 +111,56 @@ void tzic_handle_irq(struct pt_regs *); #define imx51_handle_irq tzic_handle_irq #define imx53_handle_irq tzic_handle_irq -extern void imx_enable_cpu(int cpu, bool enable); -extern void imx_set_cpu_jump(int cpu, void *jump_addr); -extern u32 imx_get_cpu_arg(int cpu); -extern void imx_set_cpu_arg(int cpu, u32 arg); -extern void v7_cpu_resume(void); +void imx_enable_cpu(int cpu, bool enable); +void imx_set_cpu_jump(int cpu, void *jump_addr); +u32 imx_get_cpu_arg(int cpu); +void imx_set_cpu_arg(int cpu, u32 arg); +void v7_cpu_resume(void); #ifdef CONFIG_SMP -extern void v7_secondary_startup(void); -extern void imx_scu_map_io(void); -extern void imx_smp_prepare(void); -extern void imx_scu_standby_enable(void); +void v7_secondary_startup(void); +void imx_scu_map_io(void); +void imx_smp_prepare(void); +void imx_scu_standby_enable(void); #else static inline void imx_scu_map_io(void) {} static inline void imx_smp_prepare(void) {} static inline void imx_scu_standby_enable(void) {} #endif -extern void imx_src_init(void); -extern void imx_src_prepare_restart(void); -extern void imx_gpc_init(void); -extern void imx_gpc_pre_suspend(void); -extern void imx_gpc_post_resume(void); -extern void imx_gpc_mask_all(void); -extern void imx_gpc_restore_all(void); -extern void imx_anatop_init(void); -extern void imx_anatop_pre_suspend(void); -extern void imx_anatop_post_resume(void); -extern u32 imx_anatop_get_digprog(void); -extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); -extern void imx6q_set_chicken_bit(void); - -extern void imx_cpu_die(unsigned int cpu); -extern int imx_cpu_kill(unsigned int cpu); +void imx_src_init(void); +void imx_gpc_init(void); +void imx_gpc_pre_suspend(void); +void imx_gpc_post_resume(void); +void imx_gpc_mask_all(void); +void imx_gpc_restore_all(void); +void imx_gpc_irq_mask(struct irq_data *d); +void imx_gpc_irq_unmask(struct irq_data *d); +void imx_anatop_init(void); +void imx_anatop_pre_suspend(void); +void imx_anatop_post_resume(void); +int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); +void imx6q_set_chicken_bit(void); + +void imx_cpu_die(unsigned int cpu); +int imx_cpu_kill(unsigned int cpu); #ifdef CONFIG_PM -extern void imx6q_pm_init(void); -extern void imx5_pm_init(void); +void imx6q_pm_init(void); +void imx6q_pm_set_ccm_base(void __iomem *base); +void imx5_pm_init(void); #else static inline void imx6q_pm_init(void) {} +static inline void imx6q_pm_set_ccm_base(void __iomem *base) {} static inline void imx5_pm_init(void) {} #endif #ifdef CONFIG_NEON -extern int mx51_neon_fixup(void); +int mx51_neon_fixup(void); #else static inline int mx51_neon_fixup(void) { return 0; } #endif #ifdef CONFIG_CACHE_L2X0 -extern void imx_init_l2cache(void); +void imx_init_l2cache(void); #else static inline void imx_init_l2cache(void) {} #endif diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index e70e3acbf9bd..ba3b498a67ec 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -1,6 +1,9 @@ - +#include <linux/err.h> #include <linux/module.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> #include "hardware.h" #include "common.h" @@ -8,11 +11,23 @@ unsigned int __mxc_cpu_type; EXPORT_SYMBOL(__mxc_cpu_type); +static unsigned int imx_soc_revision; + void mxc_set_cpu_type(unsigned int type) { __mxc_cpu_type = type; } +void imx_set_soc_revision(unsigned int rev) +{ + imx_soc_revision = rev; +} + +unsigned int imx_get_soc_revision(void) +{ + return imx_soc_revision; +} + void imx_print_silicon_rev(const char *cpu, int srev) { if (srev == IMX_CHIP_REVISION_UNKNOWN) @@ -44,3 +59,81 @@ void __init imx_set_aips(void __iomem *base) reg = __raw_readl(base + 0x50) & 0x00FFFFFF; __raw_writel(reg, base + 0x50); } + +struct device * __init imx_soc_device_init(void) +{ + struct soc_device_attribute *soc_dev_attr; + struct soc_device *soc_dev; + struct device_node *root; + const char *soc_id; + int ret; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return NULL; + + soc_dev_attr->family = "Freescale i.MX"; + + root = of_find_node_by_path("/"); + ret = of_property_read_string(root, "model", &soc_dev_attr->machine); + of_node_put(root); + if (ret) + goto free_soc; + + switch (__mxc_cpu_type) { + case MXC_CPU_MX1: + soc_id = "i.MX1"; + break; + case MXC_CPU_MX21: + soc_id = "i.MX21"; + break; + case MXC_CPU_MX25: + soc_id = "i.MX25"; + break; + case MXC_CPU_MX27: + soc_id = "i.MX27"; + break; + case MXC_CPU_MX31: + soc_id = "i.MX31"; + break; + case MXC_CPU_MX35: + soc_id = "i.MX35"; + break; + case MXC_CPU_MX51: + soc_id = "i.MX51"; + break; + case MXC_CPU_MX53: + soc_id = "i.MX53"; + break; + case MXC_CPU_IMX6SL: + soc_id = "i.MX6SL"; + break; + case MXC_CPU_IMX6DL: + soc_id = "i.MX6DL"; + break; + case MXC_CPU_IMX6Q: + soc_id = "i.MX6Q"; + break; + default: + soc_id = "Unknown"; + } + soc_dev_attr->soc_id = soc_id; + + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d.%d", + (imx_soc_revision >> 4) & 0xf, + imx_soc_revision & 0xf); + if (!soc_dev_attr->revision) + goto free_soc; + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) + goto free_rev; + + return soc_device_to_device(soc_dev); + +free_rev: + kfree(soc_dev_attr->revision); +free_soc: + kfree(soc_dev_attr); + return NULL; +} diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c index e02de188ae83..074b1a81ba76 100644 --- a/arch/arm/mach-imx/epit.c +++ b/arch/arm/mach-imx/epit.c @@ -171,7 +171,7 @@ static irqreturn_t epit_timer_interrupt(int irq, void *dev_id) static struct irqaction epit_timer_irq = { .name = "i.MX EPIT Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = epit_timer_interrupt, }; diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 44a65e9ff1fc..586e0171a652 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -90,7 +90,7 @@ void imx_gpc_restore_all(void) writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4); } -static void imx_gpc_irq_unmask(struct irq_data *d) +void imx_gpc_irq_unmask(struct irq_data *d) { void __iomem *reg; u32 val; @@ -105,7 +105,7 @@ static void imx_gpc_irq_unmask(struct irq_data *d) writel_relaxed(val, reg); } -static void imx_gpc_irq_mask(struct irq_data *d) +void imx_gpc_irq_mask(struct irq_data *d) { void __iomem *reg; u32 val; diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 3daf1ed90579..b35e99cc5e5b 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -52,7 +52,9 @@ void imx_cpu_die(unsigned int cpu) * the register being cleared to kill the cpu. */ imx_set_cpu_arg(cpu, ~0); - cpu_do_idle(); + + while (1) + cpu_do_idle(); } int imx_cpu_kill(unsigned int cpu) diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index 53e43e579dd7..bece8a65e6f0 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -34,17 +34,11 @@ static const char *imx51_dt_board_compat[] __initdata = { NULL }; -static void __init imx51_timer_init(void) -{ - mx51_clocks_init_dt(); -} - DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)") .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, .handle_irq = imx51_handle_irq, - .init_time = imx51_timer_init, .init_machine = imx51_dt_init, .init_late = imx51_init_late, .dt_compat = imx51_dt_board_compat, diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 368a6e3f5926..58b864a3fc20 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -404,8 +404,7 @@ static int armadillo5x0_sdhc1_init(struct device *dev, /* When supported the trigger type have to be BOTH */ ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), - detect_irq, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, + detect_irq, IRQF_TRIGGER_FALLING, "sdhc-detect", data); if (ret) diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index 98c58944015a..c9c4d8d96931 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -36,17 +36,11 @@ static const char *imx53_dt_board_compat[] __initdata = { NULL }; -static void __init imx53_timer_init(void) -{ - mx53_clocks_init_dt(); -} - DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)") .map_io = mx53_map_io, .init_early = imx53_init_early, .init_irq = mx53_init_irq, .handle_irq = imx53_handle_irq, - .init_time = imx53_timer_init, .init_machine = imx53_dt_init, .init_late = imx53_init_late, .dt_compat = imx53_dt_board_compat, diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 85a1b51346c8..d0cfb225ec9a 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -11,11 +11,8 @@ */ #include <linux/clk.h> -#include <linux/clk-provider.h> #include <linux/clkdev.h> -#include <linux/clocksource.h> #include <linux/cpu.h> -#include <linux/delay.h> #include <linux/export.h> #include <linux/init.h> #include <linux/io.h> @@ -25,7 +22,7 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/phy.h> #include <linux/reboot.h> #include <linux/regmap.h> @@ -40,64 +37,6 @@ #include "cpuidle.h" #include "hardware.h" -static u32 chip_revision; - -int imx6q_revision(void) -{ - return chip_revision; -} - -static void __init imx6q_init_revision(void) -{ - u32 rev = imx_anatop_get_digprog(); - - switch (rev & 0xff) { - case 0: - chip_revision = IMX_CHIP_REVISION_1_0; - break; - case 1: - chip_revision = IMX_CHIP_REVISION_1_1; - break; - case 2: - chip_revision = IMX_CHIP_REVISION_1_2; - break; - default: - chip_revision = IMX_CHIP_REVISION_UNKNOWN; - } - - mxc_set_cpu_type(rev >> 16 & 0xff); -} - -static void imx6q_restart(enum reboot_mode mode, const char *cmd) -{ - struct device_node *np; - void __iomem *wdog_base; - - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-wdt"); - wdog_base = of_iomap(np, 0); - if (!wdog_base) - goto soft; - - imx_src_prepare_restart(); - - /* enable wdog */ - writew_relaxed(1 << 2, wdog_base); - /* write twice to ensure the request will not get ignored */ - writew_relaxed(1 << 2, wdog_base); - - /* wait for reset to assert ... */ - mdelay(500); - - pr_err("Watchdog reset failed to assert reset\n"); - - /* delay to allow the serial port to show the message */ - mdelay(50); - -soft: - /* we'll take a jump through zero as a poor second */ - soft_restart(0); -} - /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { @@ -192,9 +131,20 @@ static void __init imx6q_1588_init(void) static void __init imx6q_init_machine(void) { + struct device *parent; + + imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", + imx_get_soc_revision()); + + mxc_arch_reset_init_dt(); + + parent = imx_soc_device_init(); + if (parent == NULL) + pr_warn("failed to initialize soc device\n"); + imx6q_enet_phy_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); imx_anatop_init(); imx6q_pm_init(); @@ -226,17 +176,22 @@ static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev) val = readl_relaxed(base + OCOTP_CFG3); val >>= OCOTP_CFG3_SPEED_SHIFT; if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ) - if (opp_disable(cpu_dev, 1200000000)) + if (dev_pm_opp_disable(cpu_dev, 1200000000)) pr_warn("failed to disable 1.2 GHz OPP\n"); put_node: of_node_put(np); } -static void __init imx6q_opp_init(struct device *cpu_dev) +static void __init imx6q_opp_init(void) { struct device_node *np; + struct device *cpu_dev = get_cpu_device(0); + if (!cpu_dev) { + pr_warn("failed to get cpu0 device\n"); + return; + } np = of_node_get(cpu_dev->of_node); if (!np) { pr_warn("failed to find cpu0 node\n"); @@ -264,11 +219,11 @@ static void __init imx6q_init_late(void) * WAIT mode is broken on TO 1.0 and 1.1, so there is no point * to run cpuidle on them. */ - if (imx6q_revision() > IMX_CHIP_REVISION_1_1) + if (imx_get_soc_revision() > IMX_CHIP_REVISION_1_1) imx6q_cpuidle_init(); if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) { - imx6q_opp_init(&imx6q_cpufreq_pdev.dev); + imx6q_opp_init(); platform_device_register(&imx6q_cpufreq_pdev); } } @@ -281,21 +236,13 @@ static void __init imx6q_map_io(void) static void __init imx6q_init_irq(void) { - imx6q_init_revision(); + imx_init_revision_from_anatop(); imx_init_l2cache(); imx_src_init(); imx_gpc_init(); irqchip_init(); } -static void __init imx6q_timer_init(void) -{ - of_clk_init(NULL); - clocksource_of_init(); - imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", - imx6q_revision()); -} - static const char *imx6q_dt_compat[] __initdata = { "fsl,imx6dl", "fsl,imx6q", @@ -306,9 +253,8 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)") .smp = smp_ops(imx_smp_ops), .map_io = imx6q_map_io, .init_irq = imx6q_init_irq, - .init_time = imx6q_timer_init, .init_machine = imx6q_init_machine, .init_late = imx6q_init_late, .dt_compat = imx6q_dt_compat, - .restart = imx6q_restart, + .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index 0d75dc54f715..2f952e3fcf89 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -7,35 +7,60 @@ * */ -#include <linux/clk-provider.h> #include <linux/irqchip.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> +#include <linux/regmap.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "common.h" +static void __init imx6sl_fec_init(void) +{ + struct regmap *gpr; + + /* set FEC clock from internal PLL clock source */ + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sl-iomuxc-gpr"); + if (!IS_ERR(gpr)) { + regmap_update_bits(gpr, IOMUXC_GPR1, + IMX6SL_GPR1_FEC_CLOCK_MUX2_SEL_MASK, 0); + regmap_update_bits(gpr, IOMUXC_GPR1, + IMX6SL_GPR1_FEC_CLOCK_MUX1_SEL_MASK, 0); + } else { + pr_err("failed to find fsl,imx6sl-iomux-gpr regmap\n"); + } +} + static void __init imx6sl_init_machine(void) { + struct device *parent; + mxc_arch_reset_init_dt(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + parent = imx_soc_device_init(); + if (parent == NULL) + pr_warn("failed to initialize soc device\n"); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); + + imx6sl_fec_init(); + imx_anatop_init(); + /* Reuse imx6q pm code */ + imx6q_pm_init(); } static void __init imx6sl_init_irq(void) { + imx_init_revision_from_anatop(); imx_init_l2cache(); imx_src_init(); imx_gpc_init(); irqchip_init(); } -static void __init imx6sl_timer_init(void) -{ - of_clk_init(NULL); -} - static const char *imx6sl_dt_compat[] __initdata = { "fsl,imx6sl", NULL, @@ -44,7 +69,6 @@ static const char *imx6sl_dt_compat[] __initdata = { DT_MACHINE_START(IMX6SL, "Freescale i.MX6 SoloLite (Device Tree)") .map_io = debug_ll_io_init, .init_irq = imx6sl_init_irq, - .init_time = imx6sl_timer_init, .init_machine = imx6sl_init_machine, .dt_compat = imx6sl_dt_compat, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 1ed916175d41..50044a21b388 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -311,7 +311,7 @@ static int mx31_3ds_sdhc1_init(struct device *dev, } ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), - detect_irq, IRQF_DISABLED | + detect_irq, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-detect", data); if (ret) { diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 19bb6441a7d4..c5f95674e9b7 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -20,7 +20,7 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/i2c.h> -#include <linux/i2c/at24.h> +#include <linux/platform_data/at24.h> #include <linux/dma-mapping.h> #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index bc0261e99d39..639a3dfb0092 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -23,7 +23,7 @@ #include <linux/smsc911x.h> #include <linux/interrupt.h> #include <linux/i2c.h> -#include <linux/i2c/at24.h> +#include <linux/platform_data/at24.h> #include <linux/delay.h> #include <linux/spi/spi.h> #include <linux/irq.h> @@ -371,8 +371,7 @@ static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq, #endif ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, - "sdhc-detect", data); + IRQF_TRIGGER_FALLING, "sdhc-detect", data); if (ret) goto err_gpio_free_2; diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index e805ac273e9c..592ddbe031ac 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -18,7 +18,7 @@ */ #include <linux/i2c.h> -#include <linux/i2c/at24.h> +#include <linux/platform_data/at24.h> #include <linux/io.h> #include <linux/mtd/plat-ram.h> #include <linux/mtd/physmap.h> diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index b726cb1c5fdd..ac504b67326b 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -24,7 +24,7 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/i2c.h> -#include <linux/i2c/at24.h> +#include <linux/platform_data/at24.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c index 816991deb9b8..af0cb8a9dc48 100644 --- a/arch/arm/mach-imx/mach-vf610.c +++ b/arch/arm/mach-imx/mach-vf610.c @@ -8,9 +8,7 @@ */ #include <linux/of_platform.h> -#include <linux/clocksource.h> #include <linux/irqchip.h> -#include <linux/clk-provider.h> #include <asm/mach/arch.h> #include <asm/hardware/cache-l2x0.h> @@ -28,12 +26,6 @@ static void __init vf610_init_irq(void) irqchip_init(); } -static void __init vf610_init_time(void) -{ - of_clk_init(NULL); - clocksource_of_init(); -} - static const char *vf610_dt_compat[] __initdata = { "fsl,vf610", NULL, @@ -41,7 +33,6 @@ static const char *vf610_dt_compat[] __initdata = { DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)") .init_irq = vf610_init_irq, - .init_time = vf610_init_time, .init_machine = vf610_init_machine, .dt_compat = vf610_dt_compat, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index 0910761e8280..8825d1217d18 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -29,7 +29,7 @@ #include <asm/mach/time.h> #include <linux/i2c.h> -#include <linux/i2c/at24.h> +#include <linux/platform_data/at24.h> #include <linux/mfd/mc13xxx.h> #include "common.h" diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index eb3cce38c70d..d1d52600f458 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/clk.h> #include <linux/pinctrl/machine.h> +#include <linux/of_address.h> #include <asm/mach/map.h> @@ -88,8 +89,15 @@ void __init imx51_init_early(void) void __init imx53_init_early(void) { + struct device_node *np; + void __iomem *base; + mxc_set_cpu_type(MXC_CPU_MX53); - mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR)); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx53-iomuxc"); + base = of_iomap(np, 0); + WARN_ON(!base); + mxc_iomux_v3_init(base); imx_src_init(); } @@ -100,7 +108,14 @@ void __init mx51_init_irq(void) void __init mx53_init_irq(void) { - tzic_init_irq(MX53_IO_ADDRESS(MX53_TZIC_BASE_ADDR)); + struct device_node *np; + void __iomem *base; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx53-tzic"); + base = of_iomap(np, 0); + WARN_ON(!base); + + tzic_init_irq(base); } static struct sdma_platform_data imx51_sdma_pdata __initdata = { diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c index d4361b80c5fb..649fe49ce85e 100644 --- a/arch/arm/mach-imx/mx31lilly-db.c +++ b/arch/arm/mach-imx/mx31lilly-db.c @@ -130,8 +130,7 @@ static int mxc_mmc1_init(struct device *dev, gpio_direction_input(gpio_wp); ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)), - detect_irq, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, + detect_irq, IRQF_TRIGGER_FALLING, "MMC detect", data); if (ret) goto exit_free_wp; diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index 8629e5be7ecd..b08ab3ad4a6d 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -34,6 +34,7 @@ #define MXC_CPU_MX35 35 #define MXC_CPU_MX51 51 #define MXC_CPU_MX53 53 +#define MXC_CPU_IMX6SL 0x60 #define MXC_CPU_IMX6DL 0x61 #define MXC_CPU_IMX6Q 0x63 @@ -152,6 +153,11 @@ extern unsigned int __mxc_cpu_type; #endif #ifndef __ASSEMBLY__ +static inline bool cpu_is_imx6sl(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6SL; +} + static inline bool cpu_is_imx6dl(void) { return __mxc_cpu_type == MXC_CPU_IMX6DL; diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index 204942749e21..aecd9f8037e0 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -10,9 +10,15 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <linux/delay.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/irq.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> #include <linux/of.h> +#include <linux/of_address.h> +#include <linux/regmap.h> #include <linux/suspend.h> #include <asm/cacheflush.h> #include <asm/proc-fns.h> @@ -22,6 +28,147 @@ #include "common.h" #include "hardware.h" +#define CCR 0x0 +#define BM_CCR_WB_COUNT (0x7 << 16) +#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21) +#define BM_CCR_RBC_EN (0x1 << 27) + +#define CLPCR 0x54 +#define BP_CLPCR_LPM 0 +#define BM_CLPCR_LPM (0x3 << 0) +#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2) +#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) +#define BM_CLPCR_SBYOS (0x1 << 6) +#define BM_CLPCR_DIS_REF_OSC (0x1 << 7) +#define BM_CLPCR_VSTBY (0x1 << 8) +#define BP_CLPCR_STBY_COUNT 9 +#define BM_CLPCR_STBY_COUNT (0x3 << 9) +#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11) +#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16) +#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17) +#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19) +#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21) +#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22) +#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23) +#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24) +#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25) +#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26) +#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27) + +#define CGPR 0x64 +#define BM_CGPR_CHICKEN_BIT (0x1 << 17) + +static void __iomem *ccm_base; + +void imx6q_set_chicken_bit(void) +{ + u32 val = readl_relaxed(ccm_base + CGPR); + + val |= BM_CGPR_CHICKEN_BIT; + writel_relaxed(val, ccm_base + CGPR); +} + +static void imx6q_enable_rbc(bool enable) +{ + u32 val; + + /* + * need to mask all interrupts in GPC before + * operating RBC configurations + */ + imx_gpc_mask_all(); + + /* configure RBC enable bit */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_RBC_EN; + val |= enable ? BM_CCR_RBC_EN : 0; + writel_relaxed(val, ccm_base + CCR); + + /* configure RBC count */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_RBC_BYPASS_COUNT; + val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0; + writel(val, ccm_base + CCR); + + /* + * need to delay at least 2 cycles of CKIL(32K) + * due to hardware design requirement, which is + * ~61us, here we use 65us for safe + */ + udelay(65); + + /* restore GPC interrupt mask settings */ + imx_gpc_restore_all(); +} + +static void imx6q_enable_wb(bool enable) +{ + u32 val; + + /* configure well bias enable bit */ + val = readl_relaxed(ccm_base + CLPCR); + val &= ~BM_CLPCR_WB_PER_AT_LPM; + val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0; + writel_relaxed(val, ccm_base + CLPCR); + + /* configure well bias count */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_WB_COUNT; + val |= enable ? BM_CCR_WB_COUNT : 0; + writel_relaxed(val, ccm_base + CCR); +} + +int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) +{ + struct irq_desc *iomuxc_irq_desc; + u32 val = readl_relaxed(ccm_base + CLPCR); + + val &= ~BM_CLPCR_LPM; + switch (mode) { + case WAIT_CLOCKED: + break; + case WAIT_UNCLOCKED: + val |= 0x1 << BP_CLPCR_LPM; + val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM; + break; + case STOP_POWER_ON: + val |= 0x2 << BP_CLPCR_LPM; + break; + case WAIT_UNCLOCKED_POWER_OFF: + val |= 0x1 << BP_CLPCR_LPM; + val &= ~BM_CLPCR_VSTBY; + val &= ~BM_CLPCR_SBYOS; + break; + case STOP_POWER_OFF: + val |= 0x2 << BP_CLPCR_LPM; + val |= 0x3 << BP_CLPCR_STBY_COUNT; + val |= BM_CLPCR_VSTBY; + val |= BM_CLPCR_SBYOS; + if (cpu_is_imx6sl()) { + val |= BM_CLPCR_BYPASS_PMIC_READY; + val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; + } else { + val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; + } + break; + default: + return -EINVAL; + } + + /* + * Unmask the always pending IOMUXC interrupt #32 as wakeup source to + * deassert dsm_request signal, so that we can ensure dsm_request + * is not asserted when we're going to write CLPCR register to set LPM. + * After setting up LPM bits, we need to mask this wakeup source. + */ + iomuxc_irq_desc = irq_to_desc(32); + imx_gpc_irq_unmask(&iomuxc_irq_desc->irq_data); + writel_relaxed(val, ccm_base + CLPCR); + imx_gpc_irq_mask(&iomuxc_irq_desc->irq_data); + + return 0; +} + static int imx6q_suspend_finish(unsigned long val) { cpu_do_idle(); @@ -33,14 +180,19 @@ static int imx6q_pm_enter(suspend_state_t state) switch (state) { case PM_SUSPEND_MEM: imx6q_set_lpm(STOP_POWER_OFF); + imx6q_enable_wb(true); + imx6q_enable_rbc(true); imx_gpc_pre_suspend(); imx_anatop_pre_suspend(); imx_set_cpu_jump(0, v7_cpu_resume); /* Zzz ... */ cpu_suspend(0, imx6q_suspend_finish); - imx_smp_prepare(); + if (cpu_is_imx6q() || cpu_is_imx6dl()) + imx_smp_prepare(); imx_anatop_post_resume(); imx_gpc_post_resume(); + imx6q_enable_rbc(false); + imx6q_enable_wb(false); imx6q_set_lpm(WAIT_CLOCKED); break; default: @@ -55,7 +207,29 @@ static const struct platform_suspend_ops imx6q_pm_ops = { .valid = suspend_valid_only_mem, }; +void __init imx6q_pm_set_ccm_base(void __iomem *base) +{ + ccm_base = base; +} + void __init imx6q_pm_init(void) { + struct regmap *gpr; + + WARN_ON(!ccm_base); + + /* + * Force IOMUXC irq pending, so that the interrupt to GPC can be + * used to deassert dsm_request signal when the signal gets + * asserted unexpectedly. + */ + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); + if (!IS_ERR(gpr)) + regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT, + IMX6Q_GPR1_GINT); + + /* Set initial power mode */ + imx6q_set_lpm(WAIT_CLOCKED); + suspend_set_ops(&imx6q_pm_ops); } diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 10a6b1a8c5ac..45f7f4e0a447 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -91,6 +91,7 @@ void imx_enable_cpu(int cpu, bool enable) spin_lock(&scr_lock); val = readl_relaxed(src_base + SRC_SCR); val = enable ? val | mask : val & ~mask; + val |= 1 << (BP_SRC_SCR_CORE1_RST + cpu - 1); writel_relaxed(val, src_base + SRC_SCR); spin_unlock(&scr_lock); } @@ -114,21 +115,6 @@ void imx_set_cpu_arg(int cpu, u32 arg) writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4); } -void imx_src_prepare_restart(void) -{ - u32 val; - - /* clear enable bits of secondary cores */ - spin_lock(&scr_lock); - val = readl_relaxed(src_base + SRC_SCR); - val &= ~(0x7 << BP_SRC_SCR_CORE1_ENABLE); - writel_relaxed(val, src_base + SRC_SCR); - spin_unlock(&scr_lock); - - /* clear persistent entry register of primary core */ - writel_relaxed(0, src_base + SRC_GPR1); -} - void __init imx_src_init(void) { struct device_node *np; diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c index 64ff37ea72b1..5e3027d3692f 100644 --- a/arch/arm/mach-imx/system.c +++ b/arch/arm/mach-imx/system.c @@ -52,6 +52,15 @@ void mxc_restart(enum reboot_mode mode, const char *cmd) /* Assert SRS signal */ __raw_writew(wcr_enable, wdog_base); + /* + * Due to imx6q errata ERR004346 (WDOG: WDOG SRS bit requires to be + * written twice), we add another two writes to ensure there must be at + * least two writes happen in the same one 32kHz clock period. We save + * the target check here, since the writes shouldn't be a huge burden + * for other platforms. + */ + __raw_writew(wcr_enable, wdog_base); + __raw_writew(wcr_enable, wdog_base); /* wait for reset to assert... */ mdelay(500); @@ -117,6 +126,17 @@ void __init imx_init_l2cache(void) /* Configure the L2 PREFETCH and POWER registers */ val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL); val |= 0x70800000; + /* + * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0 + * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2 + * But according to ARM PL310 errata: 752271 + * ID: 752271: Double linefill feature can cause data corruption + * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2 + * Workaround: The only workaround to this erratum is to disable the + * double linefill feature. This is the default behavior. + */ + if (cpu_is_imx6q()) + val &= ~(1 << 30 | 1 << 23); writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL); val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN; writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL); diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index cd46529e9eaa..9b6638aadeaa 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -250,7 +250,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) static struct irqaction mxc_timer_irq = { .name = "i.MX Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = mxc_timer_interrupt, }; |