diff options
Diffstat (limited to 'arch/arm/mach-iop32x')
| -rw-r--r-- | arch/arm/mach-iop32x/Kconfig | 28 | ||||
| -rw-r--r-- | arch/arm/mach-iop32x/Makefile | 11 | ||||
| -rw-r--r-- | arch/arm/mach-iop32x/Makefile.boot | 3 | ||||
| -rw-r--r-- | arch/arm/mach-iop32x/common.c | 72 | ||||
| -rw-r--r-- | arch/arm/mach-iop32x/iq31244-mm.c | 45 | ||||
| -rw-r--r-- | arch/arm/mach-iop32x/iq31244-pci.c | 129 | ||||
| -rw-r--r-- | arch/arm/mach-iop32x/iq80321-mm.c | 45 | ||||
| -rw-r--r-- | arch/arm/mach-iop32x/iq80321-pci.c | 123 | ||||
| -rw-r--r-- | arch/arm/mach-iop32x/irq.c | 97 | ||||
| -rw-r--r-- | arch/arm/mach-iop32x/pci.c | 220 | ||||
| -rw-r--r-- | arch/arm/mach-iop32x/setup.c | 173 | ||||
| -rw-r--r-- | arch/arm/mach-iop32x/time.c | 108 |
12 files changed, 1054 insertions, 0 deletions
diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig new file mode 100644 index 000000000000..21e3e8c8c2ad --- /dev/null +++ b/arch/arm/mach-iop32x/Kconfig @@ -0,0 +1,28 @@ +if ARCH_IOP32X + +menu "IOP32x Implementation Options" + +comment "IOP32x Platform Types" + +config ARCH_IQ80321 + bool "Enable support for IQ80321" + help + Say Y here if you want to run your kernel on the Intel IQ80321 + evaluation kit for the IOP321 chipset. + +config ARCH_IQ31244 + bool "Enable support for IQ31244" + help + Say Y here if you want to run your kernel on the Intel IQ31244 + evaluation kit for the IOP321 chipset. + +config ARCH_EP80219 + bool "Enable support for EP80219" + select ARCH_IQ31244 + help + Say Y here if you want to run your kernel on the Intel EP80219 + evaluation kit for the Intel 80219 chipset (a IOP321 variant). + +endmenu + +endif diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile new file mode 100644 index 000000000000..94144f7efa6c --- /dev/null +++ b/arch/arm/mach-iop32x/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the linux kernel. +# + +obj-y := common.o setup.o irq.o pci.o time.o +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_ARCH_IQ80321) += iq80321-mm.o iq80321-pci.o +obj-$(CONFIG_ARCH_IQ31244) += iq31244-mm.o iq31244-pci.o diff --git a/arch/arm/mach-iop32x/Makefile.boot b/arch/arm/mach-iop32x/Makefile.boot new file mode 100644 index 000000000000..47000dccd61f --- /dev/null +++ b/arch/arm/mach-iop32x/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0xa0008000 +params_phys-y := 0xa0000100 +initrd_phys-y := 0xa0800000 diff --git a/arch/arm/mach-iop32x/common.c b/arch/arm/mach-iop32x/common.c new file mode 100644 index 000000000000..8044af6a54e1 --- /dev/null +++ b/arch/arm/mach-iop32x/common.c @@ -0,0 +1,72 @@ +/* + * arch/arm/mach-iop32x/common.c + * + * Common routines shared across all IOP3xx implementations + * + * Author: Deepak Saxena <dsaxena@mvista.com> + * + * Copyright 2003 (c) MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/delay.h> +#include <asm/hardware.h> + +/* + * Shared variables + */ +unsigned long iop3xx_pcibios_min_io = 0; +unsigned long iop3xx_pcibios_min_mem = 0; + +#ifdef CONFIG_ARCH_EP80219 +#include <linux/kernel.h> +/* + * Default power-off for EP80219 + */ + +static inline void ep80219_send_to_pic(__u8 c) { +} + +void ep80219_power_off(void) +{ + /* + * This function will send a SHUTDOWN_COMPLETE message to the PIC controller + * over I2C. We are not using the i2c subsystem since we are going to power + * off and it may be removed + */ + + /* Send the Address byte w/ the start condition */ + *IOP321_IDBR1 = 0x60; + *IOP321_ICR1 = 0xE9; + mdelay(1); + + /* Send the START_MSG byte w/ no start or stop condition */ + *IOP321_IDBR1 = 0x0F; + *IOP321_ICR1 = 0xE8; + mdelay(1); + + /* Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or stop condition */ + *IOP321_IDBR1 = 0x03; + *IOP321_ICR1 = 0xE8; + mdelay(1); + + /* Send an ignored byte w/ stop condition */ + *IOP321_IDBR1 = 0x00; + *IOP321_ICR1 = 0xEA; + + while (1) ; +} + +#include <linux/init.h> +#include <linux/pm.h> + +static int __init ep80219_init(void) +{ + pm_power_off = ep80219_power_off; + return 0; +} +arch_initcall(ep80219_init); +#endif diff --git a/arch/arm/mach-iop32x/iq31244-mm.c b/arch/arm/mach-iop32x/iq31244-mm.c new file mode 100644 index 000000000000..ffc6692c95ad --- /dev/null +++ b/arch/arm/mach-iop32x/iq31244-mm.c @@ -0,0 +1,45 @@ +/* + * linux/arch/arm/mach-iop32x/iq31244-mm.c + * + * Low level memory initialization for iq80321 platform + * + * Author: Rory Bolt <rorybolt@pacbell.net> + * Copyright (C) 2002 Rory Bolt + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/mm.h> +#include <linux/init.h> + +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/page.h> + +#include <asm/mach/map.h> + + +/* + * IQ80321 specific IO mappings + * + * We use RedBoot's setup for the onboard devices. + */ +static struct map_desc iq31244_io_desc[] __initdata = { + { /* on-board devices */ + .virtual = IQ31244_UART, + .pfn = __phys_to_pfn(IQ31244_UART), + .length = 0x00100000, + .type = MT_DEVICE + } +}; + +void __init iq31244_map_io(void) +{ + iop321_map_io(); + + iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc)); +} diff --git a/arch/arm/mach-iop32x/iq31244-pci.c b/arch/arm/mach-iop32x/iq31244-pci.c new file mode 100644 index 000000000000..e447c8103ecd --- /dev/null +++ b/arch/arm/mach-iop32x/iq31244-pci.c @@ -0,0 +1,129 @@ +/* + * arch/arm/mach-iop32x/iq31244-pci.c + * + * PCI support for the Intel IQ31244 reference board + * + * Author: Rory Bolt <rorybolt@pacbell.net> + * Copyright (C) 2002 Rory Bolt + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/slab.h> + +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/mach/pci.h> +#include <asm/mach-types.h> + +/* + * The following macro is used to lookup irqs in a standard table + * format for those systems that do not already have PCI + * interrupts properly routed. We assume 1 <= pin <= 4 + */ +#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \ +({ int _ctl_ = -1; \ + unsigned int _idsel = idsel - minid; \ + if (_idsel <= maxid) \ + _ctl_ = pci_irq_table[_idsel][pin-1]; \ + _ctl_; }) + +#define INTA IRQ_IQ31244_INTA +#define INTB IRQ_IQ31244_INTB +#define INTC IRQ_IQ31244_INTC +#define INTD IRQ_IQ31244_INTD + +#define INTE IRQ_IQ31244_I82546 + +static inline int __init +iq31244_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) +{ + static int pci_irq_table[][4] = { + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ +#ifdef CONFIG_ARCH_EP80219 + {INTB, INTB, INTB, INTB}, /* CFlash */ + {INTE, INTE, INTE, INTE}, /* 82551 Pro 100 */ + {INTD, INTD, INTD, INTD}, /* PCI-X Slot */ + {INTC, INTC, INTC, INTC}, /* SATA */ +#else + {INTB, INTB, INTB, INTB}, /* CFlash */ + {INTC, INTC, INTC, INTC}, /* SATA */ + {INTD, INTD, INTD, INTD}, /* PCI-X Slot */ + {INTE, INTE, INTE, INTE}, /* 82546 GigE */ +#endif // CONFIG_ARCH_EP80219 + }; + + BUG_ON(pin < 1 || pin > 4); + + return PCI_IRQ_TABLE_LOOKUP(0, 7); +} + +static int iq31244_setup(int nr, struct pci_sys_data *sys) +{ + struct resource *res; + + if(nr != 0) + return 0; + + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + if (!res) + panic("PCI: unable to alloc resources"); + + res[0].start = IOP321_PCI_LOWER_IO_VA; + res[0].end = IOP321_PCI_UPPER_IO_VA; + res[0].name = "IQ31244 PCI I/O Space"; + res[0].flags = IORESOURCE_IO; + + res[1].start = IOP321_PCI_LOWER_MEM_PA; + res[1].end = IOP321_PCI_UPPER_MEM_PA; + res[1].name = "IQ31244 PCI Memory Space"; + res[1].flags = IORESOURCE_MEM; + + request_resource(&ioport_resource, &res[0]); + request_resource(&iomem_resource, &res[1]); + + sys->mem_offset = IOP321_PCI_MEM_OFFSET; + sys->io_offset = IOP321_PCI_IO_OFFSET; + + sys->resource[0] = &res[0]; + sys->resource[1] = &res[1]; + sys->resource[2] = NULL; + + return 1; +} + +static void iq31244_preinit(void) +{ + iop321_init(); +} + +static struct hw_pci iq31244_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iq31244_setup, + .scan = iop321_scan_bus, + .preinit = iq31244_preinit, + .map_irq = iq31244_map_irq +}; + +static int __init iq31244_pci_init(void) +{ + if (machine_is_iq31244()) + pci_common_init(&iq31244_pci); + return 0; +} + +subsys_initcall(iq31244_pci_init); + + + + diff --git a/arch/arm/mach-iop32x/iq80321-mm.c b/arch/arm/mach-iop32x/iq80321-mm.c new file mode 100644 index 000000000000..5f702a7ff622 --- /dev/null +++ b/arch/arm/mach-iop32x/iq80321-mm.c @@ -0,0 +1,45 @@ +/* + * linux/arch/arm/mach-iop32x/iq80321-mm.c + * + * Low level memory initialization for iq80321 platform + * + * Author: Rory Bolt <rorybolt@pacbell.net> + * Copyright (C) 2002 Rory Bolt + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/mm.h> +#include <linux/init.h> + +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/page.h> + +#include <asm/mach/map.h> + + +/* + * IQ80321 specific IO mappings + * + * We use RedBoot's setup for the onboard devices. + */ +static struct map_desc iq80321_io_desc[] __initdata = { + { /* on-board devices */ + .virtual = IQ80321_UART, + .pfn = __phys_to_pfn(IQ80321_UART), + .length = 0x00100000, + .type = MT_DEVICE + } +}; + +void __init iq80321_map_io(void) +{ + iop321_map_io(); + + iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc)); +} diff --git a/arch/arm/mach-iop32x/iq80321-pci.c b/arch/arm/mach-iop32x/iq80321-pci.c new file mode 100644 index 000000000000..8767950e131f --- /dev/null +++ b/arch/arm/mach-iop32x/iq80321-pci.c @@ -0,0 +1,123 @@ +/* + * arch/arm/mach-iop32x/iq80321-pci.c + * + * PCI support for the Intel IQ80321 reference board + * + * Author: Rory Bolt <rorybolt@pacbell.net> + * Copyright (C) 2002 Rory Bolt + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/slab.h> + +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/mach/pci.h> +#include <asm/mach-types.h> + +/* + * The following macro is used to lookup irqs in a standard table + * format for those systems that do not already have PCI + * interrupts properly routed. We assume 1 <= pin <= 4 + */ +#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \ +({ int _ctl_ = -1; \ + unsigned int _idsel = idsel - minid; \ + if (_idsel <= maxid) \ + _ctl_ = pci_irq_table[_idsel][pin-1]; \ + _ctl_; }) + +#define INTA IRQ_IQ80321_INTA +#define INTB IRQ_IQ80321_INTB +#define INTC IRQ_IQ80321_INTC +#define INTD IRQ_IQ80321_INTD + +#define INTE IRQ_IQ80321_I82544 + +static inline int __init +iq80321_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) +{ + static int pci_irq_table[][4] = { + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + {INTE, INTE, INTE, INTE}, /* Gig-E */ + {-1, -1, -1, -1}, /* Unused */ + {INTC, INTD, INTA, INTB}, /* PCI-X Slot */ + {-1, -1, -1, -1}, + }; + + BUG_ON(pin < 1 || pin > 4); + +// return PCI_IRQ_TABLE_LOOKUP(4, 7); + return pci_irq_table[idsel%4][pin-1]; +} + +static int iq80321_setup(int nr, struct pci_sys_data *sys) +{ + struct resource *res; + + if(nr != 0) + return 0; + + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + if (!res) + panic("PCI: unable to alloc resources"); + + res[0].start = IOP321_PCI_LOWER_IO_VA; + res[0].end = IOP321_PCI_UPPER_IO_VA; + res[0].name = "IQ80321 PCI I/O Space"; + res[0].flags = IORESOURCE_IO; + + res[1].start = IOP321_PCI_LOWER_MEM_PA; + res[1].end = IOP321_PCI_UPPER_MEM_PA; + res[1].name = "IQ80321 PCI Memory Space"; + res[1].flags = IORESOURCE_MEM; + + request_resource(&ioport_resource, &res[0]); + request_resource(&iomem_resource, &res[1]); + + sys->mem_offset = IOP321_PCI_MEM_OFFSET; + sys->io_offset = IOP321_PCI_IO_OFFSET; + + sys->resource[0] = &res[0]; + sys->resource[1] = &res[1]; + sys->resource[2] = NULL; + + return 1; +} + +static void iq80321_preinit(void) +{ + iop321_init(); +} + +static struct hw_pci iq80321_pci __initdata = { + .swizzle = pci_std_swizzle, + .nr_controllers = 1, + .setup = iq80321_setup, + .scan = iop321_scan_bus, + .preinit = iq80321_preinit, + .map_irq = iq80321_map_irq +}; + +static int __init iq80321_pci_init(void) +{ + if (machine_is_iq80321()) + pci_common_init(&iq80321_pci); + return 0; +} + +subsys_initcall(iq80321_pci_init); + + + + diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c new file mode 100644 index 000000000000..c5f633d2d632 --- /dev/null +++ b/arch/arm/mach-iop32x/irq.c @@ -0,0 +1,97 @@ +/* + * linux/arch/arm/mach-iop32x/irq.c + * + * Generic IOP32X IRQ handling functionality + * + * Author: Rory Bolt <rorybolt@pacbell.net> + * Copyright (C) 2002 Rory Bolt + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Added IOP3XX chipset and IQ80321 board masking code. + * + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/list.h> + +#include <asm/mach/irq.h> +#include <asm/irq.h> +#include <asm/hardware.h> + +#include <asm/mach-types.h> + +static u32 iop321_mask /* = 0 */; + +static inline void intctl_write(u32 val) +{ + asm volatile("mcr p6,0,%0,c0,c0,0"::"r" (val)); +} + +static inline void intstr_write(u32 val) +{ + asm volatile("mcr p6,0,%0,c4,c0,0"::"r" (val)); +} + +static void +iop321_irq_mask (unsigned int irq) +{ + + iop321_mask &= ~(1 << (irq - IOP321_IRQ_OFS)); + + intctl_write(iop321_mask); +} + +static void +iop321_irq_unmask (unsigned int irq) +{ + iop321_mask |= (1 << (irq - IOP321_IRQ_OFS)); + + intctl_write(iop321_mask); +} + +struct irq_chip ext_chip = { + .name = "IOP", + .ack = iop321_irq_mask, + .mask = iop321_irq_mask, + .unmask = iop321_irq_unmask, +}; + +void __init iop321_init_irq(void) +{ + unsigned int i, tmp; + + /* Enable access to coprocessor 6 for dealing with IRQs. + * From RMK: + * Basically, the Intel documentation here is poor. It appears that + * you need to set the bit to be able to access the coprocessor from + * SVC mode. Whether that allows access from user space or not is + * unclear. + */ + asm volatile ( + "mrc p15, 0, %0, c15, c1, 0\n\t" + "orr %0, %0, %1\n\t" + "mcr p15, 0, %0, c15, c1, 0\n\t" + /* The action is delayed, so we have to do this: */ + "mrc p15, 0, %0, c15, c1, 0\n\t" + "mov %0, %0\n\t" + "sub pc, pc, #4" + : "=r" (tmp) : "i" (1 << 6) ); + + intctl_write(0); // disable all interrupts + intstr_write(0); // treat all as IRQ + if(machine_is_iq80321() || + machine_is_iq31244()) // all interrupts are inputs to chip + *IOP321_PCIIRSR = 0x0f; + + for(i = IOP321_IRQ_OFS; i < NR_IRQS; i++) + { + set_irq_chip(i, &ext_chip); + set_irq_handler(i, do_level_IRQ); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + + } +} + diff --git a/arch/arm/mach-iop32x/pci.c b/arch/arm/mach-iop32x/pci.c new file mode 100644 index 000000000000..1a7c683673f2 --- /dev/null +++ b/arch/arm/mach-iop32x/pci.c @@ -0,0 +1,220 @@ +/* + * arch/arm/mach-iop32x/pci.c + * + * PCI support for the Intel IOP321 chipset + * + * Author: Rory Bolt <rorybolt@pacbell.net> + * Copyright (C) 2002 Rory Bolt + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/ioport.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/hardware.h> +#include <asm/mach/pci.h> + +#include <asm/arch/iop321.h> + +// #define DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) do { } while (0) +#endif + +/* + * This routine builds either a type0 or type1 configuration command. If the + * bus is on the 80321 then a type0 made, else a type1 is created. + */ +static u32 iop321_cfg_address(struct pci_bus *bus, int devfn, int where) +{ + struct pci_sys_data *sys = bus->sysdata; + u32 addr; + + if (sys->busnr == bus->number) + addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11); + else + addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1; + + addr |= PCI_FUNC(devfn) << 8 | (where & ~3); + + return addr; +} + +/* + * This routine checks the status of the last configuration cycle. If an error + * was detected it returns a 1, else it returns a 0. The errors being checked + * are parity, master abort, target abort (master and target). These types of + * errors occure during a config cycle where there is no device, like during + * the discovery stage. + */ +static int iop321_pci_status(void) +{ + unsigned int status; + int ret = 0; + + /* + * Check the status registers. + */ + status = *IOP321_ATUSR; + if (status & 0xf900) + { + DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status); + *IOP321_ATUSR = status & 0xf900; + ret = 1; + } + status = *IOP321_ATUISR; + if (status & 0x679f) + { + DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status); + *IOP321_ATUISR = status & 0x679f; + ret = 1; + } + return ret; +} + +/* + * Simply write the address register and read the configuration + * data. Note that the 4 nop's ensure that we are able to handle + * a delayed abort (in theory.) + */ +static inline u32 iop321_read(unsigned long addr) +{ + u32 val; + + __asm__ __volatile__( + "str %1, [%2]\n\t" + "ldr %0, [%3]\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + : "=r" (val) + : "r" (addr), "r" (IOP321_OCCAR), "r" (IOP321_OCCDR)); + + return val; +} + +/* + * The read routines must check the error status of the last configuration + * cycle. If there was an error, the routine returns all hex f's. + */ +static int +iop321_read_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *value) +{ + unsigned long addr = iop321_cfg_address(bus, devfn, where); + u32 val = iop321_read(addr) >> ((where & 3) * 8); + + if( iop321_pci_status() ) + val = 0xffffffff; + + *value = val; + + return PCIBIOS_SUCCESSFUL; +} + +static int +iop321_write_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 value) +{ + unsigned long addr = iop321_cfg_address(bus, devfn, where); + u32 val; + + if (size != 4) { + val = iop321_read(addr); + if (!iop321_pci_status() == 0) + return PCIBIOS_SUCCESSFUL; + + where = (where & 3) * 8; + + if (size == 1) + val &= ~(0xff << where); + else + val &= ~(0xffff << where); + + *IOP321_OCCDR = val | value << where; + } else { + asm volatile( + "str %1, [%2]\n\t" + "str %0, [%3]\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + : + : "r" (value), "r" (addr), + "r" (IOP321_OCCAR), "r" (IOP321_OCCDR)); + } + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops iop321_ops = { + .read = iop321_read_config, + .write = iop321_write_config, +}; + +/* + * When a PCI device does not exist during config cycles, the 80200 gets a + * bus error instead of returning 0xffffffff. This handler simply returns. + */ +int +iop321_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) +{ + DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n", + addr, fsr, regs->ARM_pc, regs->ARM_lr); + + /* + * If it was an imprecise abort, then we need to correct the + * return address to be _after_ the instruction. + */ + if (fsr & (1 << 10)) + regs->ARM_pc += 4; + + return 0; +} + +/* + * Scan an IOP321 PCI bus. sys->bus defines which bus we scan. + */ +struct pci_bus *iop321_scan_bus(int nr, struct pci_sys_data *sys) +{ + return pci_scan_bus(sys->busnr, &iop321_ops, sys); +} + +void iop321_init(void) +{ + DBG("PCI: Intel 80321 PCI init code.\n"); + DBG("ATU: IOP321_ATUCMD=0x%04x\n", *IOP321_ATUCMD); + DBG("ATU: IOP321_OMWTVR0=0x%04x, IOP321_OIOWTVR=0x%04x\n", + *IOP321_OMWTVR0, + *IOP321_OIOWTVR); + DBG("ATU: IOP321_ATUCR=0x%08x\n", *IOP321_ATUCR); + DBG("ATU: IOP321_IABAR0=0x%08x IOP321_IALR0=0x%08x IOP321_IATVR0=%08x\n", + *IOP321_IABAR0, *IOP321_IALR0, *IOP321_IATVR0); + DBG("ATU: IOP321_OMWTVR0=0x%08x\n", *IOP321_OMWTVR0); + DBG("ATU: IOP321_IABAR1=0x%08x IOP321_IALR1=0x%08x\n", + *IOP321_IABAR1, *IOP321_IALR1); + DBG("ATU: IOP321_ERBAR=0x%08x IOP321_ERLR=0x%08x IOP321_ERTVR=%08x\n", + *IOP321_ERBAR, *IOP321_ERLR, *IOP321_ERTVR); + DBG("ATU: IOP321_IABAR2=0x%08x IOP321_IALR2=0x%08x IOP321_IATVR2=%08x\n", + *IOP321_IABAR2, *IOP321_IALR2, *IOP321_IATVR2); + DBG("ATU: IOP321_IABAR3=0x%08x IOP321_IALR3=0x%08x IOP321_IATVR3=%08x\n", + *IOP321_IABAR3, *IOP321_IALR3, *IOP321_IATVR3); + + hook_fault_code(16+6, iop321_pci_abort, SIGBUS, "imprecise external abort"); +} + diff --git a/arch/arm/mach-iop32x/setup.c b/arch/arm/mach-iop32x/setup.c new file mode 100644 index 000000000000..729678799271 --- /dev/null +++ b/arch/arm/mach-iop32x/setup.c @@ -0,0 +1,173 @@ +/* + * linux/arch/arm/mach-iop32x/setup.c + * + * Author: Nicolas Pitre <nico@cam.org> + * Copyright (C) 2001 MontaVista Software, Inc. + * Copyright (C) 2004 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/major.h> +#include <linux/fs.h> +#include <linux/platform_device.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_core.h> + +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/mach/map.h> +#include <asm/setup.h> +#include <asm/system.h> +#include <asm/memory.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#define IOP321_UART_XTAL 1843200 + +/* + * Standard IO mapping for all IOP321 based systems + */ +static struct map_desc iop321_std_desc[] __initdata = { + { /* mem mapped registers */ + .virtual = IOP321_VIRT_MEM_BASE, + .pfn = __phys_to_pfn(IOP321_PHYS_MEM_BASE), + .length = 0x00002000, + .type = MT_DEVICE + }, { /* PCI IO space */ + .virtual = IOP321_PCI_LOWER_IO_VA, + .pfn = __phys_to_pfn(IOP321_PCI_LOWER_IO_PA), + .length = IOP321_PCI_IO_WINDOW_SIZE, + .type = MT_DEVICE + } +}; + +#ifdef CONFIG_ARCH_IQ80321 +#define UARTBASE IQ80321_UART +#define IRQ_UART IRQ_IQ80321_UART +#endif + +#ifdef CONFIG_ARCH_IQ31244 +#define UARTBASE IQ31244_UART +#define IRQ_UART IRQ_IQ31244_UART +#endif + +static struct uart_port iop321_serial_ports[] = { + { + .membase = (char*)(UARTBASE), + .mapbase = (UARTBASE), + .irq = IRQ_UART, + .flags = UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = IOP321_UART_XTAL, + .line = 0, + .type = PORT_16550A, + .fifosize = 16 + } +}; + +static struct resource iop32x_i2c_0_resources[] = { + [0] = { + .start = 0xfffff680, + .end = 0xfffff698, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP321_I2C_0, + .end = IRQ_IOP321_I2C_0, + .flags = IORESOURCE_IRQ + } +}; + +static struct resource iop32x_i2c_1_resources[] = { + [0] = { + .start = 0xfffff6a0, + .end = 0xfffff6b8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IOP321_I2C_1, + .end = IRQ_IOP321_I2C_1, + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device iop32x_i2c_0_controller = { + .name = "IOP3xx-I2C", + .id = 0, + .num_resources = 2, + .resource = iop32x_i2c_0_resources +}; + +static struct platform_device iop32x_i2c_1_controller = { + .name = "IOP3xx-I2C", + .id = 1, + .num_resources = 2, + .resource = iop32x_i2c_1_resources +}; + +static struct platform_device *iop32x_devices[] __initdata = { + &iop32x_i2c_0_controller, + &iop32x_i2c_1_controller +}; + +void __init iop32x_init(void) +{ + if(iop_is_321()) + { + platform_add_devices(iop32x_devices, + ARRAY_SIZE(iop32x_devices)); + } +} + +void __init iop321_map_io(void) +{ + iotable_init(iop321_std_desc, ARRAY_SIZE(iop321_std_desc)); + early_serial_setup(&iop321_serial_ports[0]); +} + +#ifdef CONFIG_ARCH_IQ80321 +extern void iq80321_map_io(void); +extern struct sys_timer iop321_timer; +extern void iop321_init_time(void); +#endif + +#ifdef CONFIG_ARCH_IQ31244 +extern void iq31244_map_io(void); +extern struct sys_timer iop321_timer; +extern void iop321_init_time(void); +#endif + +#if defined(CONFIG_ARCH_IQ80321) +MACHINE_START(IQ80321, "Intel IQ80321") + /* Maintainer: Intel Corporation */ + .phys_io = IQ80321_UART, + .io_pg_offst = ((IQ80321_UART) >> 18) & 0xfffc, + .map_io = iq80321_map_io, + .init_irq = iop321_init_irq, + .timer = &iop321_timer, + .boot_params = 0xa0000100, + .init_machine = iop32x_init, +MACHINE_END +#elif defined(CONFIG_ARCH_IQ31244) +MACHINE_START(IQ31244, "Intel IQ31244") + /* Maintainer: Intel Corp. */ + .phys_io = IQ31244_UART, + .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc, + .map_io = iq31244_map_io, + .init_irq = iop321_init_irq, + .timer = &iop321_timer, + .boot_params = 0xa0000100, + .init_machine = iop32x_init, +MACHINE_END +#else +#error No machine descriptor defined for this IOP3XX implementation +#endif diff --git a/arch/arm/mach-iop32x/time.c b/arch/arm/mach-iop32x/time.c new file mode 100644 index 000000000000..3cabbbca0a02 --- /dev/null +++ b/arch/arm/mach-iop32x/time.c @@ -0,0 +1,108 @@ +/* + * arch/arm/mach-iop32x/time.c + * + * Timer code for IOP321 based systems + * + * Author: Deepak Saxena <dsaxena@mvista.com> + * + * Copyright 2002-2003 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/init.h> +#include <linux/timex.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> +#include <asm/mach/irq.h> +#include <asm/mach/time.h> + +#define IOP321_TIME_SYNC 0 + +static inline unsigned long get_elapsed(void) +{ + return LATCH - *IOP321_TU_TCR0; +} + +static unsigned long iop321_gettimeoffset(void) +{ + unsigned long elapsed, usec; + u32 tisr1, tisr2; + + /* + * If an interrupt was pending before we read the timer, + * we've already wrapped. Factor this into the time. + * If an interrupt was pending after we read the timer, + * it may have wrapped between checking the interrupt + * status and reading the timer. Re-read the timer to + * be sure its value is after the wrap. + */ + + asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr1)); + elapsed = get_elapsed(); + asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr2)); + + if(tisr1 & 1) + elapsed += LATCH; + else if (tisr2 & 1) + elapsed = LATCH + get_elapsed(); + + /* + * Now convert them to usec. + */ + usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000)); + + return usec; +} + +static irqreturn_t +iop321_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + u32 tisr; + + write_seqlock(&xtime_lock); + + asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr)); + tisr |= 1; + asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (tisr)); + + timer_tick(regs); + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction iop321_timer_irq = { + .name = "IOP321 Timer Tick", + .handler = iop321_timer_interrupt, + .flags = IRQF_DISABLED | IRQF_TIMER, +}; + +static void __init iop321_timer_init(void) +{ + u32 timer_ctl; + + setup_irq(IRQ_IOP321_TIMER0, &iop321_timer_irq); + + timer_ctl = IOP321_TMR_EN | IOP321_TMR_PRIVILEGED | IOP321_TMR_RELOAD | + IOP321_TMR_RATIO_1_1; + + asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (LATCH)); + + asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (timer_ctl)); +} + +struct sys_timer iop321_timer = { + .init = &iop321_timer_init, + .offset = iop321_gettimeoffset, +}; |