diff options
Diffstat (limited to 'arch/arm/mach-ixp2000/ixdp2x00.c')
| -rw-r--r-- | arch/arm/mach-ixp2000/ixdp2x00.c | 304 |
1 files changed, 304 insertions, 0 deletions
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c new file mode 100644 index 000000000000..21c41fe15b99 --- /dev/null +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -0,0 +1,304 @@ +/* + * arch/arm/mach-ixp2000/ixdp2x00.c + * + * Code common to IXDP2400 and IXDP2800 platforms. + * + * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> + * Maintainer: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright (C) 2002 Intel Corp. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/bitops.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/delay.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/system.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> + +#include <asm/mach/pci.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/time.h> +#include <asm/mach/flash.h> +#include <asm/mach/arch.h> + +/************************************************************************* + * IXDP2x00 IRQ Initialization + *************************************************************************/ +static volatile unsigned long *board_irq_mask; +static volatile unsigned long *board_irq_stat; +static unsigned long board_irq_count; + +#ifdef CONFIG_ARCH_IXDP2400 +/* + * Slowport configuration for accessing CPLD registers on IXDP2x00 + */ +static struct slowport_cfg slowport_cpld_cfg = { + .CCR = SLOWPORT_CCR_DIV_2, + .WTC = 0x00000070, + .RTC = 0x00000070, + .PCR = SLOWPORT_MODE_FLASH, + .ADC = SLOWPORT_ADDR_WIDTH_24 | SLOWPORT_DATA_WIDTH_8 +}; +#endif + +static void ixdp2x00_irq_mask(unsigned int irq) +{ + unsigned long dummy; + static struct slowport_cfg old_cfg; + + /* + * This is ugly in common code but really don't know + * of a better way to handle it. :( + */ +#ifdef CONFIG_ARCH_IXDP2400 + if (machine_is_ixdp2400()) + ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg); +#endif + + dummy = *board_irq_mask; + dummy |= IXP2000_BOARD_IRQ_MASK(irq); + ixp2000_reg_write(board_irq_mask, dummy); + +#ifdef CONFIG_ARCH_IXDP2400 + if (machine_is_ixdp2400()) + ixp2000_release_slowport(&old_cfg); +#endif +} + +static void ixdp2x00_irq_unmask(unsigned int irq) +{ + unsigned long dummy; + static struct slowport_cfg old_cfg; + +#ifdef CONFIG_ARCH_IXDP2400 + if (machine_is_ixdp2400()) + ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg); +#endif + + dummy = *board_irq_mask; + dummy &= ~IXP2000_BOARD_IRQ_MASK(irq); + ixp2000_reg_write(board_irq_mask, dummy); + + if (machine_is_ixdp2400()) + ixp2000_release_slowport(&old_cfg); +} + +static void ixdp2x00_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) +{ + volatile u32 ex_interrupt = 0; + static struct slowport_cfg old_cfg; + int i; + + desc->chip->mask(irq); + +#ifdef CONFIG_ARCH_IXDP2400 + if (machine_is_ixdp2400()) + ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg); +#endif + ex_interrupt = *board_irq_stat & 0xff; + if (machine_is_ixdp2400()) + ixp2000_release_slowport(&old_cfg); + + if(!ex_interrupt) { + printk(KERN_ERR "Spurious IXDP2x00 CPLD interrupt!\n"); + return; + } + + for(i = 0; i < board_irq_count; i++) { + if(ex_interrupt & (1 << i)) { + struct irqdesc *cpld_desc; + int cpld_irq = IXP2000_BOARD_IRQ(0) + i; + cpld_desc = irq_desc + cpld_irq; + cpld_desc->handle(cpld_irq, cpld_desc, regs); + } + } + + desc->chip->unmask(irq); +} + +static struct irqchip ixdp2x00_cpld_irq_chip = { + .ack = ixdp2x00_irq_mask, + .mask = ixdp2x00_irq_mask, + .unmask = ixdp2x00_irq_unmask +}; + +void ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long *mask_reg, unsigned long nr_irqs) +{ + unsigned int irq; + + ixp2000_init_irq(); + + if (!ixdp2x00_master_npu()) + return; + + board_irq_stat = stat_reg; + board_irq_mask = mask_reg; + board_irq_count = nr_irqs; + + *board_irq_mask = 0xffffffff; + + for(irq = IXP2000_BOARD_IRQ(0); irq < IXP2000_BOARD_IRQ(board_irq_count); irq++) { + set_irq_chip(irq, &ixdp2x00_cpld_irq_chip); + set_irq_handler(irq, do_level_IRQ); + set_irq_flags(irq, IRQF_VALID); + } + + /* Hook into PCI interrupt */ + set_irq_chained_handler(IRQ_IXP2000_PCIB, &ixdp2x00_irq_handler); +} + +/************************************************************************* + * IXDP2x00 memory map + *************************************************************************/ +static struct map_desc ixdp2x00_io_desc __initdata = { + .virtual = IXDP2X00_VIRT_CPLD_BASE, + .physical = IXDP2X00_PHYS_CPLD_BASE, + .length = IXDP2X00_CPLD_SIZE, + .type = MT_DEVICE +}; + +void __init ixdp2x00_map_io(void) +{ + ixp2000_map_io(); + + iotable_init(&ixdp2x00_io_desc, 1); +} + +/************************************************************************* + * IXDP2x00-common PCI init + * + * The IXDP2[48]00 has a horrid PCI bus layout. Basically the board + * contains two NPUs (ingress and egress) connected over PCI, both running + * instances of the kernel. So far so good. Peers on the PCI bus running + * Linux is a common design in telecom systems. The problem is that instead + * of all the devices being controlled by a single host, different + * devices are controlles by different NPUs on the same bus, leading to + * multiple hosts on the bus. The exact bus layout looks like: + * + * Bus 0 + * Master NPU <-------------------+-------------------> Slave NPU + * | + * | + * P2P + * | + * + * Bus 1 | + * <--+------+---------+---------+------+--> + * | | | | | + * | | | | | + * ... Dev PMC Media Eth0 Eth1 ... + * + * The master controlls all but Eth1, which is controlled by the + * slave. What this means is that the both the master and the slave + * have to scan the bus, but only one of them can enumerate the bus. + * In addition, after the bus is scanned, each kernel must remove + * the device(s) it does not control from the PCI dev list otherwise + * a driver on each NPU will try to manage it and we will have horrible + * conflicts. Oh..and the slave NPU needs to see the master NPU + * for Intel's drivers to work properly. Closed source drivers... + * + * The way we deal with this is fairly simple but ugly: + * + * 1) Let master scan and enumerate the bus completely. + * 2) Master deletes Eth1 from device list. + * 3) Slave scans bus and then deletes all but Eth1 (Eth0 on slave) + * from device list. + * 4) Find HW designers and LART them. + * + * The boards also do not do normal PCI IRQ routing, or any sort of + * sensical swizzling, so we just need to check where on the bus a + * device sits and figure out to which CPLD pin the interrupt is routed. + * See ixdp2[48]00.c files. + * + *************************************************************************/ +void ixdp2x00_slave_pci_postinit(void) +{ + struct pci_dev *dev; + + /* + * Remove PMC device is there is one + */ + if((dev = pci_find_slot(1, IXDP2X00_PMC_DEVFN))) + pci_remove_bus_device(dev); + + dev = pci_find_slot(0, IXDP2X00_21555_DEVFN); + pci_remove_bus_device(dev); +} + +/************************************************************************** + * IXDP2x00 Machine Setup + *************************************************************************/ +static struct flash_platform_data ixdp2x00_platform_data = { + .map_name = "cfi_probe", + .width = 1, +}; + +static struct ixp2000_flash_data ixdp2x00_flash_data = { + .platform_data = &ixdp2x00_platform_data, + .nr_banks = 1 +}; + +static struct resource ixdp2x00_flash_resource = { + .start = 0xc4000000, + .end = 0xc4000000 + 0x00ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ixdp2x00_flash = { + .name = "IXP2000-Flash", + .id = 0, + .dev = { + .platform_data = &ixdp2x00_flash_data, + }, + .num_resources = 1, + .resource = &ixdp2x00_flash_resource, +}; + +static struct ixp2000_i2c_pins ixdp2x00_i2c_gpio_pins = { + .sda_pin = IXDP2X00_GPIO_SDA, + .scl_pin = IXDP2X00_GPIO_SCL, +}; + +static struct platform_device ixdp2x00_i2c_controller = { + .name = "IXP2000-I2C", + .id = 0, + .dev = { + .platform_data = &ixdp2x00_i2c_gpio_pins, + }, + .num_resources = 0 +}; + +static struct platform_device *ixdp2x00_devices[] __initdata = { + &ixdp2x00_flash, + &ixdp2x00_i2c_controller +}; + +void __init ixdp2x00_init_machine(void) +{ + gpio_line_set(IXDP2X00_GPIO_I2C_ENABLE, 1); + gpio_line_config(IXDP2X00_GPIO_I2C_ENABLE, GPIO_OUT); + + platform_add_devices(ixdp2x00_devices, ARRAY_SIZE(ixdp2x00_devices)); +} + |