1 files changed, 132 insertions, 1 deletions

diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index a560cd6ad23d..bf4e520bc1bc 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -17,9 +17,138 @@
  */
 
 #include <linux/platform_device.h>
-#include <mach/hardware.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+
 #include <asm/mach/arch.h>
 
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mmc.h>
+#include <mach/imxfb.h>
+#include <mach/iomux.h>
+
+#include "devices.h"
+
+static int pcm970_sdhc2_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_PORTC + 28);
+}
+
+static int pcm970_sdhc2_pins[] = {
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+};
+
+static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
+{
+	int ret;
+
+	ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins,
+		ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2");
+	if(ret)
+		return ret;
+
+	ret = request_irq(IRQ_GPIOC(29), detect_irq, 0,
+				"imx-mmc-detect", data);
+	if (ret)
+		goto out_release_gpio;
+
+	set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING);
+
+	ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
+	if (ret)
+		goto out_release_gpio;
+
+	mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN);
+	gpio_direction_input(GPIO_PORTC + 28);
+
+	return 0;
+
+out_release_gpio:
+	mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
+			ARRAY_SIZE(pcm970_sdhc2_pins));
+	return ret;
+}
+
+static void pcm970_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOC(29), data);
+	gpio_free(GPIO_PORTC + 28);
+	mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
+			ARRAY_SIZE(pcm970_sdhc2_pins));
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.get_ro = pcm970_sdhc2_get_ro,
+	.init = pcm970_sdhc2_init,
+	.exit = pcm970_sdhc2_exit,
+};
+
+static int mxc_fb_pins[] = {
+	PA5_PF_LSCLK,	PA6_PF_LD0,	PA7_PF_LD1,	PA8_PF_LD2,
+	PA9_PF_LD3,	PA10_PF_LD4,	PA11_PF_LD5,	PA12_PF_LD6,
+	PA13_PF_LD7,	PA14_PF_LD8,	PA15_PF_LD9,	PA16_PF_LD10,
+	PA17_PF_LD11,	PA18_PF_LD12,	PA19_PF_LD13,	PA20_PF_LD14,
+	PA21_PF_LD15,	PA22_PF_LD16,	PA23_PF_LD17,	PA24_PF_REV,
+	PA25_PF_CLS,	PA26_PF_PS,	PA27_PF_SPL_SPR, PA28_PF_HSYNC,
+	PA29_PF_VSYNC,	PA30_PF_CONTRAST, PA31_PF_OE_ACD
+};
+
+static int pcm038_fb_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_fb_pins,
+			ARRAY_SIZE(mxc_fb_pins), "FB");
+}
+
+static int pcm038_fb_exit(struct platform_device *pdev)
+{
+	mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins));
+
+	return 0;
+}
+
+/*
+ * Connected is a portrait Sharp-QVGA display
+ * of type: LQ035Q7DH06
+ */
+static struct imx_fb_platform_data pcm038_fb_data = {
+	.pixclock	= 188679, /* in ps (5.3MHz) */
+	.xres		= 240,
+	.yres		= 320,
+
+	.bpp		= 16,
+	.hsync_len	= 7,
+	.left_margin	= 5,
+	.right_margin	= 16,
+
+	.vsync_len	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 9,
+	.fixed_screen_cpu = 0,
+
+	/*
+	 * - HSYNC active high
+	 * - VSYNC active high
+	 * - clk notenabled while idle
+	 * - clock not inverted
+	 * - data not inverted
+	 * - data enable low active
+	 * - enable sharp mode
+	 */
+	.pcr		= 0xFA0080C0,
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+
+	.init = pcm038_fb_init,
+	.exit = pcm038_fb_exit,
+};
+
 /*
  * system init for baseboard usage. Will be called by pcm038 init.
  *
@@ -28,4 +157,6 @@
  */
 void __init pcm970_baseboard_init(void)
 {
+	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
 }