diff options
Diffstat (limited to 'arch/arm/mach-mx5/board-mx51_babbage.c')
| -rw-r--r-- | arch/arm/mach-mx5/board-mx51_babbage.c | 265 |
1 files changed, 265 insertions, 0 deletions
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c new file mode 100644 index 000000000000..ed885f9d7b73 --- /dev/null +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -0,0 +1,265 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/fsl_devices.h> + +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/imx-uart.h> +#include <mach/iomux-mx51.h> +#include <mach/mxc_ehci.h> + +#include <asm/irq.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include "devices.h" + +#define BABBAGE_USB_HUB_RESET (0*32 + 7) /* GPIO_1_7 */ +#define BABBAGE_USBH1_STP (0*32 + 27) /* GPIO_1_27 */ +#define BABBAGE_PHY_RESET (1*32 +5) /* GPIO_2_5 */ + +/* USB_CTRL_1 */ +#define MX51_USB_CTRL_1_OFFSET 0x10 +#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) + +#define MX51_USB_PLLDIV_12_MHZ 0x00 +#define MX51_USB_PLL_DIV_19_2_MHZ 0x01 +#define MX51_USB_PLL_DIV_24_MHZ 0x02 + +static struct platform_device *devices[] __initdata = { + &mxc_fec_device, +}; + +static struct pad_desc mx51babbage_pads[] = { + /* UART1 */ + MX51_PAD_UART1_RXD__UART1_RXD, + MX51_PAD_UART1_TXD__UART1_TXD, + MX51_PAD_UART1_RTS__UART1_RTS, + MX51_PAD_UART1_CTS__UART1_CTS, + + /* UART2 */ + MX51_PAD_UART2_RXD__UART2_RXD, + MX51_PAD_UART2_TXD__UART2_TXD, + + /* UART3 */ + MX51_PAD_EIM_D25__UART3_RXD, + MX51_PAD_EIM_D26__UART3_TXD, + MX51_PAD_EIM_D27__UART3_RTS, + MX51_PAD_EIM_D24__UART3_CTS, + + /* USB HOST1 */ + MX51_PAD_USBH1_CLK__USBH1_CLK, + MX51_PAD_USBH1_DIR__USBH1_DIR, + MX51_PAD_USBH1_NXT__USBH1_NXT, + MX51_PAD_USBH1_DATA0__USBH1_DATA0, + MX51_PAD_USBH1_DATA1__USBH1_DATA1, + MX51_PAD_USBH1_DATA2__USBH1_DATA2, + MX51_PAD_USBH1_DATA3__USBH1_DATA3, + MX51_PAD_USBH1_DATA4__USBH1_DATA4, + MX51_PAD_USBH1_DATA5__USBH1_DATA5, + MX51_PAD_USBH1_DATA6__USBH1_DATA6, + MX51_PAD_USBH1_DATA7__USBH1_DATA7, + + /* USB HUB reset line*/ + MX51_PAD_GPIO_1_7__GPIO1_7, +}; + +/* Serial ports */ +#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static inline void mxc_init_imx_uart(void) +{ + mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_uart_device1, &uart_pdata); + mxc_register_device(&mxc_uart_device2, &uart_pdata); +} +#else /* !SERIAL_IMX */ +static inline void mxc_init_imx_uart(void) +{ +} +#endif /* SERIAL_IMX */ + +static int gpio_usbh1_active(void) +{ + struct pad_desc usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO_1_27; + struct pad_desc phyreset_gpio = MX51_PAD_EIM_D21__GPIO_2_5; + int ret; + + /* Set USBH1_STP to GPIO and toggle it */ + mxc_iomux_v3_setup_pad(&usbh1stp_gpio); + ret = gpio_request(BABBAGE_USBH1_STP, "usbh1_stp"); + + if (ret) { + pr_debug("failed to get MX51_PAD_USBH1_STP__GPIO_1_27: %d\n", ret); + return ret; + } + gpio_direction_output(BABBAGE_USBH1_STP, 0); + gpio_set_value(BABBAGE_USBH1_STP, 1); + msleep(100); + gpio_free(BABBAGE_USBH1_STP); + + /* De-assert USB PHY RESETB */ + mxc_iomux_v3_setup_pad(&phyreset_gpio); + ret = gpio_request(BABBAGE_PHY_RESET, "phy_reset"); + + if (ret) { + pr_debug("failed to get MX51_PAD_EIM_D21__GPIO_2_5: %d\n", ret); + return ret; + } + gpio_direction_output(BABBAGE_PHY_RESET, 1); + return 0; +} + +static inline void babbage_usbhub_reset(void) +{ + int ret; + + /* Bring USB hub out of reset */ + ret = gpio_request(BABBAGE_USB_HUB_RESET, "GPIO1_7"); + if (ret) { + printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret); + return; + } + gpio_direction_output(BABBAGE_USB_HUB_RESET, 0); + + /* USB HUB RESET - De-assert USB HUB RESET_N */ + msleep(1); + gpio_set_value(BABBAGE_USB_HUB_RESET, 0); + msleep(1); + gpio_set_value(BABBAGE_USB_HUB_RESET, 1); +} + +/* This function is board specific as the bit mask for the plldiv will also +be different for other Freescale SoCs, thus a common bitmask is not +possible and cannot get place in /plat-mxc/ehci.c.*/ +static int initialize_otg_port(struct platform_device *pdev) +{ + u32 v; + void __iomem *usb_base; + u32 usbother_base; + + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; + + /* Set the PHY clock to 19.2MHz */ + v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; + v |= MX51_USB_PLL_DIV_19_2_MHZ; + __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + iounmap(usb_base); + return 0; +} + +static int initialize_usbh1_port(struct platform_device *pdev) +{ + u32 v; + void __iomem *usb_base; + u32 usbother_base; + + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; + + /* The clock for the USBH1 ULPI port will come externally from the PHY. */ + v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET); + __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET); + iounmap(usb_base); + return 0; +} + +static struct mxc_usbh_platform_data dr_utmi_config = { + .init = initialize_otg_port, + .portsc = MXC_EHCI_UTMI_16BIT, + .flags = MXC_EHCI_INTERNAL_PHY, +}; + +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_UTMI_WIDE, +}; + +static struct mxc_usbh_platform_data usbh1_config = { + .init = initialize_usbh1_port, + .portsc = MXC_EHCI_MODE_ULPI, + .flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD), +}; + +static int otg_mode_host; + +static int __init babbage_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = 1; + else if (!strcmp(options, "device")) + otg_mode_host = 0; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 0; +} +__setup("otg_mode=", babbage_otg_mode); + +/* + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ + struct pad_desc usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; + + mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads, + ARRAY_SIZE(mx51babbage_pads)); + mxc_init_imx_uart(); + platform_add_devices(devices, ARRAY_SIZE(devices)); + + if (otg_mode_host) + mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); + else { + initialize_otg_port(NULL); + mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata); + } + + gpio_usbh1_active(); + mxc_register_device(&mxc_usbh1_device, &usbh1_config); + /* setback USBH1_STP to be function */ + mxc_iomux_v3_setup_pad(&usbh1stp); + babbage_usbhub_reset(); +} + +static void __init mx51_babbage_timer_init(void) +{ + mx51_clocks_init(32768, 24000000, 22579200, 0); +} + +static struct sys_timer mxc_timer = { + .init = mx51_babbage_timer_init, +}; + +MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") + /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */ + .phys_io = MX51_AIPS1_BASE_ADDR, + .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx51_map_io, + .init_irq = mx51_init_irq, + .init_machine = mxc_board_init, + .timer = &mxc_timer, +MACHINE_END |