17 files changed, 97 insertions, 79 deletions

diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index b4f5ab669e48..3d4c31306ca7 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -1,8 +1,9 @@
-if ARCH_MX503 || ARCH_MX51
+if ARCH_MX5
+
 # ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single
 # image. So for most time, SOC_IMX50/51/53 should be used.
 
-config ARCH_MX5
+config ARCH_MX51
 	bool
 
 config ARCH_MX50
@@ -19,7 +20,6 @@ config SOC_IMX50
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
 	select ARCH_HAS_CPUFREQ
-	select ARCH_MX5
 	select ARCH_MX50
 
 config	SOC_IMX51
@@ -30,7 +30,7 @@ config	SOC_IMX51
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
 	select ARCH_HAS_CPUFREQ
-	select ARCH_MX5
+	select ARCH_MX51
 
 config	SOC_IMX53
 	bool
@@ -38,10 +38,8 @@ config	SOC_IMX53
 	select ARM_L1_CACHE_SHIFT_6
 	select MXC_TZIC
 	select ARCH_MXC_IOMUX_V3
-	select ARCH_MX5
 	select ARCH_MX53
 
-if ARCH_MX50_SUPPORTED
 #comment "i.MX50 machines:"
 
 config MACH_MX50_RDP
@@ -56,9 +54,6 @@ config MACH_MX50_RDP
 	  Include support for MX50 reference design platform (RDP) board. This
 	  includes specific configurations for the board and its peripherals.
 
-endif # ARCH_MX50_SUPPORTED
-
-if ARCH_MX51
 comment "i.MX51 machines:"
 
 config MACH_MX51_BABBAGE
@@ -153,6 +148,7 @@ config MX51_EFIKA_COMMON
 	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_PATA_IMX
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
@@ -173,9 +169,6 @@ config MACH_MX51_EFIKASB
 	  Include support for Genesi Efika Smartbook. This includes specific
 	  configurations for the board and its peripherals.
 
-endif # ARCH_MX51
-
-if ARCH_MX53_SUPPORTED
 comment "i.MX53 machines:"
 
 config MACH_MX53_EVK
@@ -227,6 +220,4 @@ config MACH_MX53_ARD
 	  Include support for MX53 ARD platform. This includes specific
 	  configurations for the board and its peripherals.
 
-endif # ARCH_MX53_SUPPORTED
-
 endif
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index b0a140a03e5d..e28d0e165e5c 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -294,6 +294,7 @@ MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
+	.handle_irq = imx51_handle_irq,
 	.timer = &mxc_timer,
 	.init_machine = eukrea_cpuimx51_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index 452a08727166..5276660041ad 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -332,6 +332,7 @@ MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
+	.handle_irq = imx51_handle_irq,
 	.timer = &mxc_timer,
 	.init_machine = eukrea_cpuimx51sd_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c
index 7de25c6712eb..fc3621d90bde 100644
--- a/arch/arm/mach-mx5/board-mx50_rdp.c
+++ b/arch/arm/mach-mx5/board-mx50_rdp.c
@@ -219,6 +219,7 @@ MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform")
 	.map_io = mx50_map_io,
 	.init_early = imx50_init_early,
 	.init_irq = mx50_init_irq,
+	.handle_irq = imx50_handle_irq,
 	.timer = &mx50_rdp_timer,
 	.init_machine = mx50_rdp_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index e5db7c1af5da..067d8c4eb656 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -172,6 +172,7 @@ MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
+	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_3ds_timer,
 	.init_machine = mx51_3ds_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index a320094616c8..4231d984579c 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -418,6 +418,7 @@ MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
+	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_babbage_timer,
 	.init_machine = mx51_babbage_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index bfbc30037ab4..90ae903aaee7 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -161,6 +161,11 @@ static const struct gpio_led_platform_data
 	.num_leds = ARRAY_SIZE(mx51_efikamx_leds),
 };
 
+static struct esdhc_platform_data sd_pdata = {
+	.cd_type = ESDHC_CD_CONTROLLER,
+	.wp_type = ESDHC_WP_CONTROLLER,
+};
+
 static struct gpio_keys_button mx51_efikamx_powerkey[] = {
 	{
 		.code = KEY_POWER,
@@ -237,9 +242,11 @@ static void __init mx51_efikamx_init(void)
 
 	/* on < 1.2 boards both SD controllers are used */
 	if (system_rev < 0x12) {
-		imx51_add_sdhci_esdhc_imx(1, NULL);
+		imx51_add_sdhci_esdhc_imx(0, NULL);
+		imx51_add_sdhci_esdhc_imx(1, &sd_pdata);
 		mx51_efikamx_leds[2].default_trigger = "mmc1";
-	}
+	} else
+		imx51_add_sdhci_esdhc_imx(0, &sd_pdata);
 
 	gpio_led_register_device(-1, &mx51_efikamx_leds_data);
 	imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
@@ -282,6 +289,7 @@ MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
+	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_efikamx_timer,
 	.init_machine = mx51_efikamx_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 00f272195150..c26508a6708e 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -54,6 +54,7 @@
 #define EFIKASB_RFKILL		IMX_GPIO_NR(3, 1)
 
 #define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
+#define MX51_PAD_SD1_CD	IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL)
 
 static iomux_v3_cfg_t mx51efikasb_pads[] = {
 	/* USB HOST2 */
@@ -95,6 +96,8 @@ static iomux_v3_cfg_t mx51efikasb_pads[] = {
 
 	/* BT */
 	MX51_PAD_EIM_A17__GPIO2_11,
+
+	MX51_PAD_SD1_CD,
 };
 
 static int initialize_usbh2_port(struct platform_device *pdev)
@@ -180,6 +183,18 @@ static const struct gpio_keys_platform_data mx51_efikasb_keys_data __initconst =
 	.nbuttons = ARRAY_SIZE(mx51_efikasb_keys),
 };
 
+static struct esdhc_platform_data sd0_pdata = {
+#define EFIKASB_SD1_CD	IMX_GPIO_NR(2, 27)
+	.cd_gpio = EFIKASB_SD1_CD,
+	.cd_type = ESDHC_CD_GPIO,
+	.wp_type = ESDHC_WP_CONTROLLER,
+};
+
+static struct esdhc_platform_data sd1_pdata = {
+	.cd_type = ESDHC_CD_CONTROLLER,
+	.wp_type = ESDHC_WP_CONTROLLER,
+};
+
 static struct regulator *pwgt1, *pwgt2;
 
 static void mx51_efikasb_power_off(void)
@@ -248,7 +263,8 @@ static void __init efikasb_board_init(void)
 
 	mx51_efikasb_board_id();
 	mx51_efikasb_usb();
-	imx51_add_sdhci_esdhc_imx(1, NULL);
+	imx51_add_sdhci_esdhc_imx(0, &sd0_pdata);
+	imx51_add_sdhci_esdhc_imx(1, &sd1_pdata);
 
 	gpio_led_register_device(-1, &mx51_efikasb_leds_data);
 	imx_add_gpio_keys(&mx51_efikasb_keys_data);
@@ -268,6 +284,7 @@ MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
+	.handle_irq = imx51_handle_irq,
 	.init_machine =  efikasb_board_init,
 	.timer = &mx51_efikasb_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c
index ddc3015102d5..cb4d753c6c95 100644
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ b/arch/arm/mach-mx5/board-mx53_ard.c
@@ -249,6 +249,7 @@ MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
 	.map_io = mx53_map_io,
 	.init_early = imx53_init_early,
 	.init_irq = mx53_init_irq,
+	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_ard_timer,
 	.init_machine = mx53_ard_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 1b417b06b736..6a3e6168e322 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -167,6 +167,7 @@ MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
 	.map_io = mx53_map_io,
 	.init_early = imx53_init_early,
 	.init_irq = mx53_init_irq,
+	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_evk_timer,
 	.init_machine = mx53_evk_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 4e1d51d252dc..7149416d1519 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -22,6 +22,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/i2c.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
@@ -42,6 +43,7 @@
 #define LOCO_SD3_CD			IMX_GPIO_NR(3, 11)
 #define LOCO_SD3_WP			IMX_GPIO_NR(3, 12)
 #define LOCO_SD1_CD			IMX_GPIO_NR(3, 13)
+#define LOCO_ACCEL_EN			IMX_GPIO_NR(6, 14)
 
 static iomux_v3_cfg_t mx53_loco_pads[] = {
 	/* FEC */
@@ -64,6 +66,10 @@ static iomux_v3_cfg_t mx53_loco_pads[] = {
 	MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
 	MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
 	MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
+	/* I2C1 */
+	MX53_PAD_CSI0_DAT8__I2C1_SDA,
+	MX53_PAD_CSI0_DAT9__I2C1_SCL,
+	MX53_PAD_NANDF_CS1__GPIO6_14,	/* Accelerometer Enable */
 	/* I2C2 */
 	MX53_PAD_KEY_COL3__I2C2_SCL,
 	MX53_PAD_KEY_ROW3__I2C2_SDA,
@@ -257,8 +263,15 @@ static const struct gpio_led_platform_data mx53loco_leds_data __initconst = {
 	.num_leds	= ARRAY_SIZE(mx53loco_leds),
 };
 
+static struct i2c_board_info mx53loco_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("mma8450", 0x1C),
+	},
+};
+
 static void __init mx53_loco_board_init(void)
 {
+	int ret;
 	imx53_soc_init();
 
 	mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
@@ -267,6 +280,13 @@ static void __init mx53_loco_board_init(void)
 	mx53_loco_fec_reset();
 	imx53_add_fec(&mx53_loco_fec_data);
 	imx53_add_imx2_wdt(0, NULL);
+
+	ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en");
+	if (ret)
+		pr_err("Cannot request ACCEL_EN pin: %d\n", ret);
+
+	i2c_register_board_info(0, mx53loco_i2c_devices,
+				ARRAY_SIZE(mx53loco_i2c_devices));
 	imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
 	imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
 	imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data);
@@ -288,6 +308,7 @@ MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
 	.map_io = mx53_map_io,
 	.init_early = imx53_init_early,
 	.init_irq = mx53_init_irq,
+	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_loco_timer,
 	.init_machine = mx53_loco_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index bc02894eafef..e64fd2c088eb 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -140,6 +140,7 @@ MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
 	.map_io = mx53_map_io,
 	.init_early = imx53_init_early,
 	.init_irq = mx53_init_irq,
+	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_smd_timer,
 	.init_machine = mx53_smd_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index a3db3557b7c9..2b9bd1fabaf9 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1418,6 +1418,10 @@ DEFINE_CLOCK(ipu_di0_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG5_OFFSET,
 DEFINE_CLOCK(ipu_di1_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG6_OFFSET,
 		NULL, NULL, &pll3_sw_clk, NULL);
 
+/* PATA */
+DEFINE_CLOCK(pata_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG0_OFFSET,
+		NULL, NULL, &ipg_clk, &spba_clk);
+
 #define _REGISTER_CLOCK(d, n, c) \
        { \
 		.dev_id = d, \
@@ -1474,6 +1478,7 @@ static struct clk_lookup mx51_lookups[] = {
 	_REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk)
 	_REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk)
 	_REGISTER_CLOCK(NULL, "gpc_dvfs", gpc_dvfs_clk)
+	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
 };
 
 static struct clk_lookup mx53_lookups[] = {
@@ -1507,6 +1512,7 @@ static struct clk_lookup mx53_lookups[] = {
 	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
 	_REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
+	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
 };
 
 static void clk_tree_init(void)
@@ -1548,9 +1554,8 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
 	clk_enable(&main_bus_clk);
 
 	clk_enable(&iim_clk);
-	mx51_revision();
+	imx_print_silicon_rev("i.MX51", mx51_revision());
 	clk_disable(&iim_clk);
-	mx51_display_revision();
 
 	/* move usb_phy_clk to 24MHz */
 	clk_set_parent(&usb_phy1_clk, &osc_clk);
@@ -1592,9 +1597,8 @@ int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
 	clk_enable(&main_bus_clk);
 
 	clk_enable(&iim_clk);
-	mx53_revision();
+	imx_print_silicon_rev("i.MX53", mx53_revision());
 	clk_disable(&iim_clk);
-	mx53_display_revision();
 
 	/* Set SDHC parents to be PLL2 */
 	clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index 86f87da59c64..5c5328257dca 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -18,7 +18,7 @@
 #include <mach/hardware.h>
 #include <asm/io.h>
 
-static int cpu_silicon_rev = -1;
+static int mx5_cpu_rev = -1;
 
 #define IIM_SREV 0x24
 #define MX50_HW_ADADIG_DIGPROG	0xB0
@@ -28,11 +28,14 @@ static int get_mx51_srev(void)
 	void __iomem *iim_base = MX51_IO_ADDRESS(MX51_IIM_BASE_ADDR);
 	u32 rev = readl(iim_base + IIM_SREV) & 0xff;
 
-	if (rev == 0x0)
+	switch (rev) {
+	case 0x0:
 		return IMX_CHIP_REVISION_2_0;
-	else if (rev == 0x10)
+	case 0x10:
 		return IMX_CHIP_REVISION_3_0;
-	return 0;
+	default:
+		return IMX_CHIP_REVISION_UNKNOWN;
+	}
 }
 
 /*
@@ -45,33 +48,13 @@ int mx51_revision(void)
 	if (!cpu_is_mx51())
 		return -EINVAL;
 
-	if (cpu_silicon_rev == -1)
-		cpu_silicon_rev = get_mx51_srev();
+	if (mx5_cpu_rev == -1)
+		mx5_cpu_rev = get_mx51_srev();
 
-	return cpu_silicon_rev;
+	return mx5_cpu_rev;
 }
 EXPORT_SYMBOL(mx51_revision);
 
-void mx51_display_revision(void)
-{
-	int rev;
-	char *srev;
-	rev = mx51_revision();
-
-	switch (rev) {
-	case IMX_CHIP_REVISION_2_0:
-		srev = IMX_CHIP_REVISION_2_0_STRING;
-		break;
-	case IMX_CHIP_REVISION_3_0:
-		srev = IMX_CHIP_REVISION_3_0_STRING;
-		break;
-	default:
-		srev = IMX_CHIP_REVISION_UNKNOWN_STRING;
-	}
-	printk(KERN_INFO "CPU identified as i.MX51, silicon rev %s\n", srev);
-}
-EXPORT_SYMBOL(mx51_display_revision);
-
 #ifdef CONFIG_NEON
 
 /*
@@ -121,10 +104,10 @@ int mx53_revision(void)
 	if (!cpu_is_mx53())
 		return -EINVAL;
 
-	if (cpu_silicon_rev == -1)
-		cpu_silicon_rev = get_mx53_srev();
+	if (mx5_cpu_rev == -1)
+		mx5_cpu_rev = get_mx53_srev();
 
-	return cpu_silicon_rev;
+	return mx5_cpu_rev;
 }
 EXPORT_SYMBOL(mx53_revision);
 
@@ -134,7 +117,7 @@ static int get_mx50_srev(void)
 	u32 rev;
 
 	if (!anatop) {
-		cpu_silicon_rev = -EINVAL;
+		mx5_cpu_rev = -EINVAL;
 		return 0;
 	}
 
@@ -159,36 +142,13 @@ int mx50_revision(void)
 	if (!cpu_is_mx50())
 		return -EINVAL;
 
-	if (cpu_silicon_rev == -1)
-		cpu_silicon_rev = get_mx50_srev();
+	if (mx5_cpu_rev == -1)
+		mx5_cpu_rev = get_mx50_srev();
 
-	return cpu_silicon_rev;
+	return mx5_cpu_rev;
 }
 EXPORT_SYMBOL(mx50_revision);
 
-void mx53_display_revision(void)
-{
-	int rev;
-	char *srev;
-	rev = mx53_revision();
-
-	switch (rev) {
-	case IMX_CHIP_REVISION_1_0:
-		srev = IMX_CHIP_REVISION_1_0_STRING;
-		break;
-	case IMX_CHIP_REVISION_2_0:
-		srev = IMX_CHIP_REVISION_2_0_STRING;
-		break;
-	case IMX_CHIP_REVISION_2_1:
-		srev = IMX_CHIP_REVISION_2_1_STRING;
-		break;
-	default:
-		srev = IMX_CHIP_REVISION_UNKNOWN_STRING;
-	}
-	printk(KERN_INFO "CPU identified as i.MX53, silicon rev %s\n", srev);
-}
-EXPORT_SYMBOL(mx53_display_revision);
-
 static int __init post_cpu_init(void)
 {
 	unsigned int reg;
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
index f311c9616bb1..af488bc0e225 100644
--- a/arch/arm/mach-mx5/devices-imx51.h
+++ b/arch/arm/mach-mx5/devices-imx51.h
@@ -65,3 +65,7 @@ extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[];
 extern const struct imx_imx_keypad_data imx51_imx_keypad_data;
 #define imx51_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
+
+extern const struct imx_pata_imx_data imx51_pata_imx_data;
+#define imx51_add_pata_imx() \
+	imx_add_pata_imx(&imx51_pata_imx_data)
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
index c27fe8bb4762..7ca5d0c76f8b 100644
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ b/arch/arm/mach-mx5/devices-imx53.h
@@ -40,3 +40,7 @@ extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
 extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
 #define imx53_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)
+
+extern const struct imx_pata_imx_data imx53_pata_imx_data;
+#define imx53_add_pata_imx() \
+	imx_add_pata_imx(&imx53_pata_imx_data)
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index d5bf95825533..b004e178417d 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -607,7 +607,6 @@ void __init efika_board_common_init(void)
 					ARRAY_SIZE(mx51efika_pads));
 	imx51_add_imx_uart(0, &uart_pdata);
 	mx51_efika_usb();
-	imx51_add_sdhci_esdhc_imx(0, NULL);
 
 	/* FIXME: comes from original code. check this. */
 	if (mx51_revision() < IMX_CHIP_REVISION_2_0)
@@ -625,6 +624,8 @@ void __init efika_board_common_init(void)
 		ARRAY_SIZE(mx51_efika_spi_board_info));
 	imx51_add_ecspi(0, &mx51_efika_spi_pdata);
 
+	imx51_add_pata_imx();
+
 #if defined(CONFIG_CPU_FREQ_IMX)
 	get_cpu_op = mx51_get_cpu_op;
 #endif