diff options
Diffstat (limited to 'arch/arm/mach-mxs/module-tx28.c')
| -rw-r--r-- | arch/arm/mach-mxs/module-tx28.c | 131 |
1 files changed, 131 insertions, 0 deletions
diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c new file mode 100644 index 000000000000..fa0b154da67b --- /dev/null +++ b/arch/arm/mach-mxs/module-tx28.c @@ -0,0 +1,131 @@ +/* + * Copyright (C) 2010 <LW@KARO-electronics.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/fec.h> +#include <linux/gpio.h> + +#include <mach/iomux-mx28.h> +#include "../devices-mx28.h" + +#include "module-tx28.h" + +#define TX28_FEC_PHY_POWER MXS_GPIO_NR(3, 29) +#define TX28_FEC_PHY_RESET MXS_GPIO_NR(4, 13) + +static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = { + /* PHY POWER */ + MX28_PAD_PWM4__GPIO_3_29 | + MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3, + /* PHY RESET */ + MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | + MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3, + /* Mode strap pins 0-2 */ + MX28_PAD_ENET0_RXD0__GPIO_4_3 | + MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3, + MX28_PAD_ENET0_RXD1__GPIO_4_4 | + MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3, + MX28_PAD_ENET0_RX_EN__GPIO_4_2 | + MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3, + /* nINT */ + MX28_PAD_ENET0_TX_CLK__GPIO_4_5 | + MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3, + + MX28_PAD_ENET0_MDC__GPIO_4_0, + MX28_PAD_ENET0_MDIO__GPIO_4_1, + MX28_PAD_ENET0_TX_EN__GPIO_4_6, + MX28_PAD_ENET0_TXD0__GPIO_4_7, + MX28_PAD_ENET0_TXD1__GPIO_4_8, + MX28_PAD_ENET_CLK__GPIO_4_16, +}; + +#define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3) +static const iomux_cfg_t tx28_fec_pads[] __initconst = { + MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE, + MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE, + MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE, + MX28_PAD_ENET0_RXD0__ENET0_RXD0 | FEC_MODE, + MX28_PAD_ENET0_RXD1__ENET0_RXD1 | FEC_MODE, + MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | FEC_MODE, + MX28_PAD_ENET0_TXD0__ENET0_TXD0 | FEC_MODE, + MX28_PAD_ENET0_TXD1__ENET0_TXD1 | FEC_MODE, + MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE, +}; + +static const struct fec_platform_data tx28_fec_data __initconst = { + .phy = PHY_INTERFACE_MODE_RMII, +}; + +int __init tx28_add_fec0(void) +{ + int i, ret; + + pr_debug("%s: Switching FEC PHY power off\n", __func__); + ret = mxs_iomux_setup_multiple_pads(tx28_fec_gpio_pads, + ARRAY_SIZE(tx28_fec_gpio_pads)); + for (i = 0; i < ARRAY_SIZE(tx28_fec_gpio_pads); i++) { + unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]), + PAD_PIN(tx28_fec_gpio_pads[i])); + + ret = gpio_request(gpio, "FEC"); + if (ret) { + pr_err("Failed to request GPIO_%d_%d: %d\n", + PAD_BANK(tx28_fec_gpio_pads[i]), + PAD_PIN(tx28_fec_gpio_pads[i]), ret); + goto free_gpios; + } + ret = gpio_direction_output(gpio, 0); + if (ret) { + pr_err("Failed to set direction of GPIO_%d_%d to output: %d\n", + gpio / 32 + 1, gpio % 32, ret); + goto free_gpios; + } + } + + /* Power up fec phy */ + pr_debug("%s: Switching FEC PHY power on\n", __func__); + ret = gpio_direction_output(TX28_FEC_PHY_POWER, 1); + if (ret) { + pr_err("Failed to power on PHY: %d\n", ret); + goto free_gpios; + } + mdelay(26); /* 25ms according to data sheet */ + + /* nINT */ + gpio_direction_input(MXS_GPIO_NR(4, 5)); + /* Mode strap pins */ + gpio_direction_output(MXS_GPIO_NR(4, 2), 1); + gpio_direction_output(MXS_GPIO_NR(4, 3), 1); + gpio_direction_output(MXS_GPIO_NR(4, 4), 1); + + udelay(100); /* minimum assertion time for nRST */ + + pr_debug("%s: Deasserting FEC PHY RESET\n", __func__); + gpio_set_value(TX28_FEC_PHY_RESET, 1); + + ret = mxs_iomux_setup_multiple_pads(tx28_fec_pads, + ARRAY_SIZE(tx28_fec_pads)); + if (ret) { + pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n", + __func__, ret); + goto free_gpios; + } + pr_debug("%s: Registering FEC device\n", __func__); + mx28_add_fec(0, &tx28_fec_data); + return 0; + +free_gpios: + while (--i >= 0) { + unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]), + PAD_PIN(tx28_fec_gpio_pads[i])); + + gpio_free(gpio); + } + + return ret; +} |