summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap1/board-ams-delta.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap1/board-ams-delta.c')
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c112
1 files changed, 35 insertions, 77 deletions
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 49e3adffbf5b..c4c0a8ea11e4 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -36,7 +36,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/board-ams-delta.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/mux.h>
@@ -45,6 +44,7 @@
#include <mach/usb.h>
#include "ams-delta-fiq.h"
+#include "board-ams-delta.h"
#include "iomap.h"
#include "common.h"
@@ -167,7 +167,6 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
.pins[0] = 2,
};
-#define LATCH1_GPIO_BASE 232
#define LATCH1_NGPIO 8
static struct resource latch1_resources[] = {
@@ -183,7 +182,6 @@ static struct resource latch1_resources[] = {
static struct bgpio_pdata latch1_pdata = {
.label = LATCH1_LABEL,
- .base = LATCH1_GPIO_BASE,
.ngpio = LATCH1_NGPIO,
};
@@ -206,11 +204,13 @@ static struct platform_device latch1_gpio_device = {
#define LATCH1_PIN_DOCKIT1 6
#define LATCH1_PIN_DOCKIT2 7
+#define LATCH2_NGPIO 16
+
static struct resource latch2_resources[] = {
[0] = {
.name = "dat",
.start = LATCH2_PHYS,
- .end = LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8,
+ .end = LATCH2_PHYS + (LATCH2_NGPIO - 1) / 8,
.flags = IORESOURCE_MEM,
},
};
@@ -219,8 +219,7 @@ static struct resource latch2_resources[] = {
static struct bgpio_pdata latch2_pdata = {
.label = LATCH2_LABEL,
- .base = AMS_DELTA_LATCH2_GPIO_BASE,
- .ngpio = AMS_DELTA_LATCH2_NGPIO,
+ .ngpio = LATCH2_NGPIO,
};
static struct platform_device latch2_gpio_device = {
@@ -247,8 +246,8 @@ static struct platform_device latch2_gpio_device = {
#define LATCH2_PIN_SCARD_CMDVCC 11
#define LATCH2_PIN_MODEM_NRESET 12
#define LATCH2_PIN_MODEM_CODEC 13
-#define LATCH2_PIN_HOOKFLASH1 14
-#define LATCH2_PIN_HOOKFLASH2 15
+#define LATCH2_PIN_AUDIO_MUTE 14
+#define LATCH2_PIN_HOOKFLASH 15
static struct regulator_consumer_supply modem_nreset_consumers[] = {
REGULATOR_SUPPLY("RESET#", "serial8250.1"),
@@ -369,15 +368,9 @@ static struct gpiod_lookup_table ams_delta_lcd_gpio_table = {
},
};
-/*
- * Dynamically allocated GPIO numbers must be obtained fromm GPIO device
- * before they can be put in the gpio_led table. Before that happens,
- * initialize the table with invalid GPIO numbers, not 0.
- */
static struct gpio_led gpio_leds[] __initdata = {
[LATCH1_PIN_LED_CAMERA] = {
.name = "camera",
- .gpio = -EINVAL,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
#ifdef CONFIG_LEDS_TRIGGERS
.default_trigger = "ams_delta_camera",
@@ -385,27 +378,22 @@ static struct gpio_led gpio_leds[] __initdata = {
},
[LATCH1_PIN_LED_ADVERT] = {
.name = "advert",
- .gpio = -EINVAL,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
[LATCH1_PIN_LED_MAIL] = {
.name = "email",
- .gpio = -EINVAL,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
[LATCH1_PIN_LED_HANDSFREE] = {
.name = "handsfree",
- .gpio = -EINVAL,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
[LATCH1_PIN_LED_VOICEMAIL] = {
.name = "voicemail",
- .gpio = -EINVAL,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
[LATCH1_PIN_LED_VOICE] = {
.name = "voice",
- .gpio = -EINVAL,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
};
@@ -415,6 +403,24 @@ static const struct gpio_led_platform_data leds_pdata __initconst = {
.num_leds = ARRAY_SIZE(gpio_leds),
};
+static struct gpiod_lookup_table leds_gpio_table = {
+ .table = {
+ GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_CAMERA, NULL,
+ LATCH1_PIN_LED_CAMERA, 0),
+ GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_ADVERT, NULL,
+ LATCH1_PIN_LED_ADVERT, 0),
+ GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_MAIL, NULL,
+ LATCH1_PIN_LED_MAIL, 0),
+ GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_HANDSFREE, NULL,
+ LATCH1_PIN_LED_HANDSFREE, 0),
+ GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_VOICEMAIL, NULL,
+ LATCH1_PIN_LED_VOICEMAIL, 0),
+ GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_VOICE, NULL,
+ LATCH1_PIN_LED_VOICE, 0),
+ { },
+ },
+};
+
static struct i2c_board_info ams_delta_camera_board_info[] = {
{
I2C_BOARD_INFO("ov6650", 0x60),
@@ -586,6 +592,8 @@ static int gpiochip_match_by_label(struct gpio_chip *chip, void *data)
static struct gpiod_hog ams_delta_gpio_hogs[] = {
GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, "keybrd_dataout",
GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW),
+ GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_AUDIO_MUTE, "audio_mute",
+ GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW),
{},
};
@@ -675,6 +683,8 @@ static void __init ams_delta_latch2_init(void)
static void __init ams_delta_init(void)
{
+ struct platform_device *leds_pdev;
+
/* mux pins for uarts */
omap_cfg_reg(UART1_TX);
omap_cfg_reg(UART1_RTS);
@@ -738,6 +748,12 @@ static void __init ams_delta_init(void)
gpiod_add_lookup_tables(ams_delta_gpio_tables,
ARRAY_SIZE(ams_delta_gpio_tables));
+ leds_pdev = gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata);
+ if (!IS_ERR(leds_pdev)) {
+ leds_gpio_table.dev_id = dev_name(&leds_pdev->dev);
+ gpiod_add_lookup_table(&leds_gpio_table);
+ }
+
omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
omapfb_set_lcd_config(&ams_delta_lcd_config);
@@ -794,64 +810,6 @@ static struct platform_device ams_delta_modem_device = {
},
};
-/*
- * leds-gpio driver doesn't make use of GPIO lookup tables,
- * it has to be provided with GPIO numbers over platform data
- * if GPIO descriptor info can't be obtained from device tree.
- * We could either define GPIO lookup tables and use them on behalf
- * of the leds-gpio device, or we can use GPIO driver level methods
- * for identification of GPIO numbers as long as we don't support
- * device tree. Let's do the latter.
- */
-static void __init ams_delta_led_init(struct gpio_chip *chip)
-{
- struct gpio_desc *gpiod;
- int i;
-
- for (i = LATCH1_PIN_LED_CAMERA; i < LATCH1_PIN_DOCKIT1; i++) {
- gpiod = gpiochip_request_own_desc(chip, i, "camera-led", 0);
- if (IS_ERR(gpiod)) {
- pr_warn("%s: %s GPIO %d request failed (%ld)\n",
- __func__, LATCH1_LABEL, i, PTR_ERR(gpiod));
- continue;
- }
-
- /* Assign GPIO numbers to LED device. */
- gpio_leds[i].gpio = desc_to_gpio(gpiod);
-
- gpiochip_free_own_desc(gpiod);
- }
-
- gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata);
-}
-
-/*
- * The purpose of this function is to take care of assignment of GPIO numbers
- * to platform devices which depend on GPIO lines provided by Amstrad Delta
- * latch1 and/or latch2 GPIO devices but don't use GPIO lookup tables.
- * The function may be called as soon as latch1/latch2 GPIO devices are
- * initilized. Since basic-mmio-gpio driver is not registered before
- * device_initcall, this may happen at erliest during device_initcall_sync.
- * Dependent devices shouldn't be registered before that, their
- * registration may be performed from within this function or later.
- */
-static int __init ams_delta_gpio_init(void)
-{
- struct gpio_chip *chip;
-
- if (!machine_is_ams_delta())
- return -ENODEV;
-
- chip = gpiochip_find(LATCH1_LABEL, gpiochip_match_by_label);
- if (!chip)
- pr_err("%s: latch1 GPIO chip not found\n", __func__);
- else
- ams_delta_led_init(chip);
-
- return 0;
-}
-device_initcall_sync(ams_delta_gpio_init);
-
static int __init modem_nreset_init(void)
{
int err;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 07:28:12 +0100