1 files changed, 20 insertions, 7 deletions

diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index f4983ee95ab4..d46a70063b0c 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -33,6 +33,7 @@
 #include <asm/mach/map.h>
 
 #include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
 #include <asm/arch/tc.h>
 #include <asm/arch/usb.h>
 #include <asm/arch/common.h>
@@ -80,8 +81,7 @@ static struct flash_platform_data h2_flash_data = {
 };
 
 static struct resource h2_flash_resource = {
-	.start		= OMAP_CS2B_PHYS,
-	.end		= OMAP_CS2B_PHYS + OMAP_CS2B_SIZE - 1,
+	/* This is on CS3, wherever it's mapped */
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -126,10 +126,9 @@ static void __init h2_init_smc91x(void)
 		printk("Error requesting gpio 0 for smc91x irq\n");
 		return;
 	}
-	omap_set_gpio_edge_ctrl(0, OMAP_GPIO_FALLING_EDGE);
 }
 
-void h2_init_irq(void)
+static void __init h2_init_irq(void)
 {
 	omap_init_irq();
 	omap_gpio_init();
@@ -152,9 +151,13 @@ static struct omap_usb_config h2_usb_config __initdata = {
 };
 
 static struct omap_mmc_config h2_mmc_config __initdata = {
-	.mmc_blocks		= 1,
-	.mmc1_power_pin		= -1,	/* tps65010 gpio3 */
-	.mmc1_switch_pin	= OMAP_MPUIO(1),
+	.mmc [0] = {
+		.enabled 	= 1,
+		.wire4		= 1,
+		.wp_pin		= OMAP_MPUIO(3),
+		.power_pin	= -1,	/* tps65010 gpio3 */
+		.switch_pin	= OMAP_MPUIO(1),
+	},
 };
 
 static struct omap_board_config_kernel h2_config[] = {
@@ -164,6 +167,16 @@ static struct omap_board_config_kernel h2_config[] = {
 
 static void __init h2_init(void)
 {
+	/* NOTE: revC boards support NAND-boot, which can put NOR on CS2B
+	 * and NAND (either 16bit or 8bit) on CS3.
+	 */
+	h2_flash_resource.end = h2_flash_resource.start = omap_cs3_phys();
+	h2_flash_resource.end += SZ_32M - 1;
+
+	/* MMC:  card detect and WP */
+	// omap_cfg_reg(U19_ARMIO1);		/* CD */
+	omap_cfg_reg(BALLOUT_V8_ARMIO3);	/* WP */
+
 	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
 	omap_board_config = h2_config;
 	omap_board_config_size = ARRAY_SIZE(h2_config);