diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-4430sdp.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-4430sdp.c | 203 |
1 files changed, 202 insertions, 1 deletions
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 933b25bb10de..c7cef44c75d4 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -22,6 +22,7 @@ #include <linux/i2c/twl.h> #include <linux/gpio_keys.h> #include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <linux/leds.h> #include <linux/leds_pwm.h> @@ -37,6 +38,7 @@ #include <plat/mmc.h> #include <plat/omap4-keypad.h> #include <video/omapdss.h> +#include <linux/wl12xx.h> #include "mux.h" #include "hsmmc.h" @@ -51,6 +53,9 @@ #define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define GPIO_WIFI_PMENA 54 +#define GPIO_WIFI_IRQ 53 + static const int sdp4430_keymap[] = { KEY(0, 0, KEY_E), KEY(0, 1, KEY_R), @@ -124,6 +129,64 @@ static const int sdp4430_keymap[] = { KEY(7, 6, KEY_OK), KEY(7, 7, KEY_DOWN), }; +static struct omap_device_pad keypad_pads[] __initdata = { + { .name = "kpd_col1.kpd_col1", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "kpd_col1.kpd_col1", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "kpd_col2.kpd_col2", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "kpd_col3.kpd_col3", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "kpd_col4.kpd_col4", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "kpd_col5.kpd_col5", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "gpmc_a23.kpd_col7", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "gpmc_a22.kpd_col6", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "kpd_row0.kpd_row0", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "kpd_row1.kpd_row1", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "kpd_row2.kpd_row2", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "kpd_row3.kpd_row3", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "kpd_row4.kpd_row4", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "kpd_row5.kpd_row5", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "gpmc_a18.kpd_row6", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "gpmc_a19.kpd_row7", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, +}; static struct matrix_keymap_data sdp4430_keymap_data = { .keymap = sdp4430_keymap, @@ -135,6 +198,13 @@ static struct omap4_keypad_platform_data sdp4430_keypad_data = { .rows = 8, .cols = 8, }; + +static struct omap_board_data keypad_data = { + .id = 1, + .pads = keypad_pads, + .pads_cnt = ARRAY_SIZE(keypad_pads), +}; + static struct gpio_led sdp4430_gpio_leds[] = { { .name = "omap4:green:debug0", @@ -275,11 +345,40 @@ static struct platform_device sdp4430_lcd_device = { .id = -1, }; +static struct regulator_consumer_supply sdp4430_vbat_supply[] = { + REGULATOR_SUPPLY("vddvibl", "twl6040-vibra"), + REGULATOR_SUPPLY("vddvibr", "twl6040-vibra"), +}; + +static struct regulator_init_data sdp4430_vbat_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(sdp4430_vbat_supply), + .consumer_supplies = sdp4430_vbat_supply, +}; + +static struct fixed_voltage_config sdp4430_vbat_pdata = { + .supply_name = "VBAT", + .microvolts = 3750000, + .init_data = &sdp4430_vbat_data, + .gpio = -EINVAL, +}; + +static struct platform_device sdp4430_vbat = { + .name = "reg-fixed-voltage", + .id = -1, + .dev = { + .platform_data = &sdp4430_vbat_pdata, + }, +}; + static struct platform_device *sdp4430_devices[] __initdata = { &sdp4430_lcd_device, &sdp4430_gpio_keys_device, &sdp4430_leds_gpio, &sdp4430_leds_pwm, + &sdp4430_vbat, }; static struct omap_lcd_config sdp4430_lcd_config __initdata = { @@ -315,7 +414,16 @@ static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + }, + { + .mmc = 5, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, + .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, + .ocr_mask = MMC_VDD_165_195, + .nonremovable = true, }, {} /* Terminator */ }; @@ -324,6 +432,37 @@ static struct regulator_consumer_supply sdp4430_vaux_supply[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), }; +static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = { + .supply = "vmmc", + .dev_name = "omap_hsmmc.4", +}; + +static struct regulator_init_data sdp4430_vmmc5 = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &omap4_sdp4430_vmmc5_supply, +}; + +static struct fixed_voltage_config sdp4430_vwlan = { + .supply_name = "vwl1271", + .microvolts = 1800000, /* 1.8V */ + .gpio = GPIO_WIFI_PMENA, + .startup_delay = 70000, /* 70msec */ + .enable_high = 1, + .enabled_at_boot = 0, + .init_data = &sdp4430_vmmc5, +}; + +static struct platform_device omap_vwlan_device = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &sdp4430_vwlan, + }, +}; + static int omap4_twl6030_hsmmc_late_init(struct device *dev) { int ret = 0; @@ -395,7 +534,33 @@ static struct regulator_init_data sdp4430_vusim = { }, }; +static struct twl4030_codec_data twl6040_codec = { + /* single-step ramp for headset and handsfree */ + .hs_left_step = 0x0f, + .hs_right_step = 0x0f, + .hf_left_step = 0x1d, + .hf_right_step = 0x1d, +}; + +static struct twl4030_vibra_data twl6040_vibra = { + .vibldrv_res = 8, + .vibrdrv_res = 3, + .viblmotor_res = 10, + .vibrmotor_res = 10, + .vddvibl_uV = 0, /* fixed volt supply - VBAT */ + .vddvibr_uV = 0, /* fixed volt supply - VBAT */ +}; + +static struct twl4030_audio_data twl6040_audio = { + .codec = &twl6040_codec, + .vibra = &twl6040_vibra, + .audpwron_gpio = 127, + .naudint_irq = OMAP44XX_IRQ_SYS_2N, + .irq_base = TWL6040_CODEC_IRQ_BASE, +}; + static struct twl4030_platform_data sdp4430_twldata = { + .audio = &twl6040_audio, /* Regulators */ .vusim = &sdp4430_vusim, .vaux1 = &sdp4430_vaux1, @@ -593,6 +758,41 @@ static inline void board_serial_init(void) } #endif +static void omap4_sdp4430_wifi_mux_init(void) +{ + omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT | + OMAP_PIN_OFF_WAKEUPENABLE); + omap_mux_init_gpio(GPIO_WIFI_PMENA, OMAP_PIN_OUTPUT); + + omap_mux_init_signal("sdmmc5_cmd.sdmmc5_cmd", + OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc5_clk.sdmmc5_clk", + OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc5_dat0.sdmmc5_dat0", + OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc5_dat1.sdmmc5_dat1", + OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc5_dat2.sdmmc5_dat2", + OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc5_dat3.sdmmc5_dat3", + OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); + +} + +static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = { + .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ), + .board_ref_clock = WL12XX_REFCLOCK_26, + .board_tcxo_clock = WL12XX_TCXOCLOCK_26, +}; + +static void omap4_sdp4430_wifi_init(void) +{ + omap4_sdp4430_wifi_mux_init(); + if (wl12xx_set_platform_data(&omap4_sdp4430_wlan_data)) + pr_err("Error setting wl12xx data\n"); + platform_device_register(&omap_vwlan_device); +} + static void __init omap_4430sdp_init(void) { int status; @@ -609,6 +809,7 @@ static void __init omap_4430sdp_init(void) omap_sfh7741prox_init(); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); board_serial_init(); + omap4_sdp4430_wifi_init(); omap4_twl6030_hsmmc_init(mmc); usb_musb_init(&musb_board_data); @@ -622,7 +823,7 @@ static void __init omap_4430sdp_init(void) ARRAY_SIZE(sdp4430_spi_board_info)); } - status = omap4_keyboard_init(&sdp4430_keypad_data); + status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data); if (status) pr_err("Keypad initialization failed: %d\n", status); |