diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-devkit8000.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-devkit8000.c | 41 |
1 files changed, 10 insertions, 31 deletions
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 371019054b49..47e3af2166d4 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -50,7 +50,6 @@ #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> -#include <linux/usb/otg.h> #include <linux/dm9000.h> #include <linux/interrupt.h> @@ -269,20 +268,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev, devkit8000_vmmc1_supply.dev = mmc[0].dev; devkit8000_vsim_supply.dev = mmc[0].dev; - /* REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - - gpio_request(gpio + 1, "EHCI_nOC"); - gpio_direction_input(gpio + 1); - - /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ - gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); - - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - return 0; } @@ -303,7 +288,7 @@ static struct regulator_consumer_supply devkit8000_vpll2_supplies[] = { .dev = &devkit8000_lcd_device.dev, }, { - .supply = "vdss_dsi", + .supply = "vdds_dsi", .dev = &devkit8000_dss_device.dev, } }; @@ -636,20 +621,24 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; -static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 147, + .reset_gpio_port[1] = -EINVAL, .reset_gpio_port[2] = -EINVAL }; static void __init devkit8000_init(void) { + omap_serial_init(); + + omap_dm9000_init(); + devkit8000_i2c_init(); platform_add_devices(devkit8000_devices, ARRAY_SIZE(devkit8000_devices)); @@ -659,25 +648,15 @@ static void __init devkit8000_init(void) spi_register_board_info(devkit8000_spi_board_info, ARRAY_SIZE(devkit8000_spi_board_info)); - omap_serial_init(); - - omap_dm9000_init(); - devkit8000_ads7846_init(); - omap_mux_init_gpio(170, OMAP_PIN_INPUT); - - gpio_request(170, "DVI_nPD"); - /* REVISIT leave DVI powered down until it's needed ... */ - gpio_direction_output(170, true); - usb_musb_init(&musb_board_data); usb_ehci_init(&ehci_pdata); devkit8000_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init devkit8000_map_io(void) |