diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-igep0030.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-igep0030.c | 400 |
1 files changed, 400 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c new file mode 100644 index 000000000000..22b0b253e16b --- /dev/null +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -0,0 +1,400 @@ +/* + * Copyright (C) 2010 - ISEE 2007 SL + * + * Modified from mach-omap2/board-generic.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> + +#include <linux/regulator/machine.h> +#include <linux/i2c/twl.h> +#include <linux/mmc/host.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <plat/board.h> +#include <plat/common.h> +#include <plat/gpmc.h> +#include <plat/usb.h> +#include <plat/onenand.h> + +#include "mux.h" +#include "hsmmc.h" +#include "sdram-numonyx-m65kxxxxam.h" + +#define IGEP3_GPIO_LED0_GREEN 54 +#define IGEP3_GPIO_LED0_RED 53 +#define IGEP3_GPIO_LED1_RED 16 + +#define IGEP3_GPIO_WIFI_NPD 138 +#define IGEP3_GPIO_WIFI_NRESET 139 +#define IGEP3_GPIO_BT_NRESET 137 + +#define IGEP3_GPIO_USBH_NRESET 115 + + +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) + +#define ONENAND_MAP 0x20000000 + +/* + * x2 Flash built-in COMBO POP MEMORY + * Since the device is equipped with two DataRAMs, and two-plane NAND + * Flash memory array, these two component enables simultaneous program + * of 4KiB. Plane1 has only even blocks such as block0, block2, block4 + * while Plane2 has only odd blocks such as block1, block3, block5. + * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048) + */ + +static struct mtd_partition igep3_onenand_partitions[] = { + { + .name = "X-Loader", + .offset = 0, + .size = 2 * (64*(2*2048)) + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, + .size = 6 * (64*(2*2048)), + }, + { + .name = "Environment", + .offset = MTDPART_OFS_APPEND, + .size = 2 * (64*(2*2048)), + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, + .size = 12 * (64*(2*2048)), + }, + { + .name = "File System", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_onenand_platform_data igep3_onenand_pdata = { + .parts = igep3_onenand_partitions, + .nr_parts = ARRAY_SIZE(igep3_onenand_partitions), + .onenand_setup = NULL, + .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ +}; + +static struct platform_device igep3_onenand_device = { + .name = "omap2-onenand", + .id = -1, + .dev = { + .platform_data = &igep3_onenand_pdata, + }, +}; + +void __init igep3_flash_init(void) +{ + u8 cs = 0; + u8 onenandcs = GPMC_CS_NUM + 1; + + for (cs = 0; cs < GPMC_CS_NUM; cs++) { + u32 ret; + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + /* Check if NAND/oneNAND is configured */ + if ((ret & 0xC00) == 0x800) + /* NAND found */ + pr_err("IGEP3: Unsupported NAND found\n"); + else { + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); + + if ((ret & 0x3F) == (ONENAND_MAP >> 24)) + /* OneNAND found */ + onenandcs = cs; + } + } + + if (onenandcs > GPMC_CS_NUM) { + pr_err("IGEP3: Unable to find configuration in GPMC\n"); + return; + } + + igep3_onenand_pdata.cs = onenandcs; + + if (platform_device_register(&igep3_onenand_device) < 0) + pr_err("IGEP3: Unable to register OneNAND device\n"); +} + +#else +void __init igep3_flash_init(void) {} +#endif + +static struct regulator_consumer_supply igep3_vmmc1_supply = { + .supply = "vmmc", +}; + +/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ +static struct regulator_init_data igep3_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &igep3_vmmc1_supply, +}; + +static struct omap2_hsmmc_info mmc[] = { + [0] = { + .mmc = 1, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + }, +#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) + [1] = { + .mmc = 2, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + }, +#endif + {} /* Terminator */ +}; + +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +#include <linux/leds.h> + +static struct gpio_led igep3_gpio_leds[] = { + [0] = { + .name = "gpio-led:red:d0", + .gpio = IGEP3_GPIO_LED0_RED, + .default_trigger = "default-off" + }, + [1] = { + .name = "gpio-led:green:d0", + .gpio = IGEP3_GPIO_LED0_GREEN, + .default_trigger = "default-off", + }, + [2] = { + .name = "gpio-led:red:d1", + .gpio = IGEP3_GPIO_LED1_RED, + .default_trigger = "default-off", + }, + [3] = { + .name = "gpio-led:green:d1", + .default_trigger = "heartbeat", + .gpio = -EINVAL, /* gets replaced */ + }, +}; + +static struct gpio_led_platform_data igep3_led_pdata = { + .leds = igep3_gpio_leds, + .num_leds = ARRAY_SIZE(igep3_gpio_leds), +}; + +static struct platform_device igep3_led_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &igep3_led_pdata, + }, +}; + +static void __init igep3_leds_init(void) +{ + platform_device_register(&igep3_led_device); +} + +#else +static inline void igep3_leds_init(void) +{ + if ((gpio_request(IGEP3_GPIO_LED0_RED, "gpio-led:red:d0") == 0) && + (gpio_direction_output(IGEP3_GPIO_LED0_RED, 1) == 0)) { + gpio_export(IGEP3_GPIO_LED0_RED, 0); + gpio_set_value(IGEP3_GPIO_LED0_RED, 1); + } else + pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_RED\n"); + + if ((gpio_request(IGEP3_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) && + (gpio_direction_output(IGEP3_GPIO_LED0_GREEN, 1) == 0)) { + gpio_export(IGEP3_GPIO_LED0_GREEN, 0); + gpio_set_value(IGEP3_GPIO_LED0_GREEN, 1); + } else + pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_GREEN\n"); + + if ((gpio_request(IGEP3_GPIO_LED1_RED, "gpio-led:red:d1") == 0) && + (gpio_direction_output(IGEP3_GPIO_LED1_RED, 1) == 0)) { + gpio_export(IGEP3_GPIO_LED1_RED, 0); + gpio_set_value(IGEP3_GPIO_LED1_RED, 1); + } else + pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_RED\n"); +} +#endif + +static int igep3_twl4030_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + mmc[0].gpio_cd = gpio + 0; + omap2_hsmmc_init(mmc); + + /* + * link regulators to MMC adapters ... we "know" the + * regulators will be set up only *after* we return. + */ + igep3_vmmc1_supply.dev = mmc[0].dev; + + /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ +#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) + if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0) + && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) { + gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); + gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0); + } else + pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_GREEN\n"); +#else + igep3_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; +#endif + + return 0; +}; + +static struct twl4030_gpio_platform_data igep3_twl4030_gpio_pdata = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = true, + .setup = igep3_twl4030_gpio_setup, +}; + +static struct twl4030_usb_data igep3_twl4030_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static void __init igep3_init_irq(void) +{ + omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params); + omap_init_irq(); + omap_gpio_init(); +} + +static struct twl4030_platform_data igep3_twl4030_pdata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .usb = &igep3_twl4030_usb_data, + .gpio = &igep3_twl4030_gpio_pdata, + .vmmc1 = &igep3_vmmc1, +}; + +static struct i2c_board_info __initdata igep3_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &igep3_twl4030_pdata, + }, +}; + +static int __init igep3_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, igep3_i2c_boardinfo, + ARRAY_SIZE(igep3_i2c_boardinfo)); + + return 0; +} + +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + +#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) + +static void __init igep3_wifi_bt_init(void) +{ + /* Configure MUX values for W-LAN + Bluetooth GPIO's */ + omap_mux_init_gpio(IGEP3_GPIO_WIFI_NPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(IGEP3_GPIO_WIFI_NRESET, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(IGEP3_GPIO_BT_NRESET, OMAP_PIN_OUTPUT); + + /* Set GPIO's for W-LAN + Bluetooth combo module */ + if ((gpio_request(IGEP3_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) && + (gpio_direction_output(IGEP3_GPIO_WIFI_NPD, 1) == 0)) { + gpio_export(IGEP3_GPIO_WIFI_NPD, 0); + } else + pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NPD\n"); + + if ((gpio_request(IGEP3_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) && + (gpio_direction_output(IGEP3_GPIO_WIFI_NRESET, 1) == 0)) { + gpio_export(IGEP3_GPIO_WIFI_NRESET, 0); + gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 0); + udelay(10); + gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 1); + } else + pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NRESET\n"); + + if ((gpio_request(IGEP3_GPIO_BT_NRESET, "GPIO_BT_NRESET") == 0) && + (gpio_direction_output(IGEP3_GPIO_BT_NRESET, 1) == 0)) { + gpio_export(IGEP3_GPIO_BT_NRESET, 0); + } else + pr_warning("IGEP3: Could not obtain gpio GPIO_BT_NRESET\n"); +} +#else +void __init igep3_wifi_bt_init(void) {} +#endif + +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + +static void __init igep3_init(void) +{ + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + + /* Register I2C busses and drivers */ + igep3_i2c_init(); + + omap_serial_init(); + usb_musb_init(&musb_board_data); + + igep3_flash_init(); + igep3_leds_init(); + + /* + * WLAN-BT combo module from MuRata wich has a Marvell WLAN + * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. + */ + igep3_wifi_bt_init(); + +} + +MACHINE_START(IGEP0030, "IGEP OMAP3 module") + .boot_params = 0x80000100, + .map_io = omap3_map_io, + .init_irq = igep3_init_irq, + .init_machine = igep3_init, + .timer = &omap_timer, +MACHINE_END |