summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/board-overo.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/board-overo.c')
-rw-r--r--arch/arm/mach-omap2/board-overo.c160
1 files changed, 100 insertions, 60 deletions
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 5748b5d06c23..f6d384111911 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -72,6 +72,9 @@
#define OVERO_SMSC911X2_CS 4
#define OVERO_SMSC911X2_GPIO 65
+/* whether to register LCD35 instead of LCD43 */
+static bool overo_use_lcd35;
+
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
@@ -149,78 +152,94 @@ static inline void __init overo_init_smsc911x(void) { return; }
#define OVERO_GPIO_LCD_EN 144
#define OVERO_GPIO_LCD_BL 145
-static struct tfp410_platform_data dvi_panel = {
- .i2c_bus_num = 3,
- .power_down_gpio = -1,
+static struct connector_atv_platform_data overo_tv_pdata = {
+ .name = "tv",
+ .source = "venc.0",
+ .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+ .invert_polarity = false,
};
-static struct omap_dss_device overo_dvi_device = {
- .name = "dvi",
- .type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "tfp410",
- .data = &dvi_panel,
- .phy.dpi.data_lines = 24,
+static struct platform_device overo_tv_connector_device = {
+ .name = "connector-analog-tv",
+ .id = 0,
+ .dev.platform_data = &overo_tv_pdata,
};
-static struct omap_dss_device overo_tv_device = {
- .name = "tv",
- .driver_name = "venc",
- .type = OMAP_DISPLAY_TYPE_VENC,
- .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+static const struct display_timing overo_lcd43_videomode = {
+ .pixelclock = { 0, 9200000, 0 },
+
+ .hactive = { 0, 480, 0 },
+ .hfront_porch = { 0, 8, 0 },
+ .hback_porch = { 0, 4, 0 },
+ .hsync_len = { 0, 41, 0 },
+
+ .vactive = { 0, 272, 0 },
+ .vfront_porch = { 0, 4, 0 },
+ .vback_porch = { 0, 2, 0 },
+ .vsync_len = { 0, 10, 0 },
+
+ .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+ DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
};
-static struct panel_generic_dpi_data lcd43_panel = {
- .name = "samsung_lte430wq_f0c",
- .num_gpios = 2,
- .gpios = {
- OVERO_GPIO_LCD_EN,
- OVERO_GPIO_LCD_BL
- },
+static struct panel_dpi_platform_data overo_lcd43_pdata = {
+ .name = "lcd43",
+ .source = "dpi.0",
+
+ .data_lines = 24,
+
+ .display_timing = &overo_lcd43_videomode,
+
+ .enable_gpio = OVERO_GPIO_LCD_EN,
+ .backlight_gpio = OVERO_GPIO_LCD_BL,
};
-static struct omap_dss_device overo_lcd43_device = {
- .name = "lcd43",
- .type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "generic_dpi_panel",
- .data = &lcd43_panel,
- .phy.dpi.data_lines = 24,
+static struct platform_device overo_lcd43_device = {
+ .name = "panel-dpi",
+ .id = 0,
+ .dev.platform_data = &overo_lcd43_pdata,
};
-#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
- defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
-static struct panel_generic_dpi_data lcd35_panel = {
- .num_gpios = 2,
- .gpios = {
- OVERO_GPIO_LCD_EN,
- OVERO_GPIO_LCD_BL
- },
+static struct connector_dvi_platform_data overo_dvi_connector_pdata = {
+ .name = "dvi",
+ .source = "tfp410.0",
+ .i2c_bus_num = 3,
};
-static struct omap_dss_device overo_lcd35_device = {
- .type = OMAP_DISPLAY_TYPE_DPI,
- .name = "lcd35",
- .driver_name = "lgphilips_lb035q02_panel",
- .phy.dpi.data_lines = 24,
- .data = &lcd35_panel,
+static struct platform_device overo_dvi_connector_device = {
+ .name = "connector-dvi",
+ .id = 0,
+ .dev.platform_data = &overo_dvi_connector_pdata,
};
-#endif
-static struct omap_dss_device *overo_dss_devices[] = {
- &overo_dvi_device,
- &overo_tv_device,
-#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
- defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
- &overo_lcd35_device,
-#endif
- &overo_lcd43_device,
+static struct encoder_tfp410_platform_data overo_tfp410_pdata = {
+ .name = "tfp410.0",
+ .source = "dpi.0",
+ .data_lines = 24,
+ .power_down_gpio = -1,
+};
+
+static struct platform_device overo_tfp410_device = {
+ .name = "tfp410",
+ .id = 0,
+ .dev.platform_data = &overo_tfp410_pdata,
};
static struct omap_dss_board_info overo_dss_data = {
- .num_devices = ARRAY_SIZE(overo_dss_devices),
- .devices = overo_dss_devices,
- .default_device = &overo_dvi_device,
+ .default_display_name = "lcd43",
};
+static void __init overo_display_init(void)
+{
+ omap_display_init(&overo_dss_data);
+
+ if (!overo_use_lcd35)
+ platform_device_register(&overo_lcd43_device);
+ platform_device_register(&overo_tfp410_device);
+ platform_device_register(&overo_dvi_connector_device);
+ platform_device_register(&overo_tv_connector_device);
+}
+
static struct mtd_partition overo_nand_partitions[] = {
{
.name = "xloader",
@@ -408,24 +427,41 @@ static int __init overo_i2c_init(void)
return 0;
}
+static struct panel_lb035q02_platform_data overo_lcd35_pdata = {
+ .name = "lcd35",
+ .source = "dpi.0",
+
+ .data_lines = 24,
+
+ .enable_gpio = OVERO_GPIO_LCD_EN,
+ .backlight_gpio = OVERO_GPIO_LCD_BL,
+};
+
+/*
+ * NOTE: We need to add either the lgphilips panel, or the lcd43 panel. The
+ * selection is done based on the overo_use_lcd35 field. If new SPI
+ * devices are added here, extra work is needed to make only the lgphilips panel
+ * affected by the overo_use_lcd35 field.
+ */
static struct spi_board_info overo_spi_board_info[] __initdata = {
-#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
- defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
{
- .modalias = "lgphilips_lb035q02_panel-spi",
+ .modalias = "panel_lgphilips_lb035q02",
.bus_num = 1,
.chip_select = 1,
.max_speed_hz = 500000,
.mode = SPI_MODE_3,
+ .platform_data = &overo_lcd35_pdata,
},
-#endif
};
static int __init overo_spi_init(void)
{
overo_ads7846_init();
- spi_register_board_info(overo_spi_board_info,
- ARRAY_SIZE(overo_spi_board_info));
+
+ if (overo_use_lcd35) {
+ spi_register_board_info(overo_spi_board_info,
+ ARRAY_SIZE(overo_spi_board_info));
+ }
return 0;
}
@@ -463,11 +499,13 @@ static void __init overo_init(void)
{
int ret;
+ if (strstr(boot_command_line, "omapdss.def_disp=lcd35"))
+ overo_use_lcd35 = true;
+
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
overo_i2c_init();
omap_hsmmc_init(mmc);
- omap_display_init(&overo_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
@@ -484,6 +522,8 @@ static void __init overo_init(void)
overo_init_keys();
omap_twl4030_audio_init("overo", NULL);
+ overo_display_init();
+
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 10:31:39 +0100