diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-rx51-peripherals.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-rx51-peripherals.c | 120 |
1 files changed, 108 insertions, 12 deletions
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 4377a4cf36eb..abdf321c2d41 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -45,6 +45,8 @@ /* list all spi devices here */ enum { RX51_SPI_WL1251, + RX51_SPI_MIPID, /* LCD panel */ + RX51_SPI_TSC2005, /* Touch Controller */ }; static struct wl12xx_platform_data wl1251_pdata; @@ -54,6 +56,16 @@ static struct omap2_mcspi_device_config wl1251_mcspi_config = { .single_channel = 1, }; +static struct omap2_mcspi_device_config mipid_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, +}; + +static struct omap2_mcspi_device_config tsc2005_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, +}; + static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { [RX51_SPI_WL1251] = { .modalias = "wl1251", @@ -64,6 +76,22 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { .controller_data = &wl1251_mcspi_config, .platform_data = &wl1251_pdata, }, + [RX51_SPI_MIPID] = { + .modalias = "acx565akm", + .bus_num = 1, + .chip_select = 2, + .max_speed_hz = 6000000, + .controller_data = &mipid_mcspi_config, + }, + [RX51_SPI_TSC2005] = { + .modalias = "tsc2005", + .bus_num = 1, + .chip_select = 0, + /* .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),*/ + .max_speed_hz = 6000000, + .controller_data = &tsc2005_mcspi_config, + /* .platform_data = &tsc2005_config,*/ + }, }; #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) @@ -277,7 +305,7 @@ static struct regulator_consumer_supply rx51_vmmc1_supply = { .dev_name = "mmci-omap-hs.0", }; -static struct regulator_consumer_supply rx51_vmmc2_supply = { +static struct regulator_consumer_supply rx51_vaux3_supply = { .supply = "vmmc", .dev_name = "mmci-omap-hs.1", }; @@ -287,6 +315,48 @@ static struct regulator_consumer_supply rx51_vsim_supply = { .dev_name = "mmci-omap-hs.1", }; +static struct regulator_consumer_supply rx51_vmmc2_supplies[] = { + /* tlv320aic3x analog supplies */ + { + .supply = "AVDD", + .dev_name = "2-0018", + }, + { + .supply = "DRVDD", + .dev_name = "2-0018", + }, + /* Keep vmmc as last item. It is not iterated for newer boards */ + { + .supply = "vmmc", + .dev_name = "mmci-omap-hs.1", + }, +}; + +static struct regulator_consumer_supply rx51_vio_supplies[] = { + /* tlv320aic3x digital supplies */ + { + .supply = "IOVDD", + .dev_name = "2-0018" + }, + { + .supply = "DVDD", + .dev_name = "2-0018" + }, +}; + +#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) +extern struct platform_device rx51_display_device; +#endif + +static struct regulator_consumer_supply rx51_vaux1_consumers[] = { +#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) + { + .supply = "vdds_sdi", + .dev = &rx51_display_device.dev, + }, +#endif +}; + static struct regulator_init_data rx51_vaux1 = { .constraints = { .name = "V28", @@ -297,6 +367,8 @@ static struct regulator_init_data rx51_vaux1 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(rx51_vaux1_consumers), + .consumer_supplies = rx51_vaux1_consumers, }; static struct regulator_init_data rx51_vaux2 = { @@ -338,7 +410,7 @@ static struct regulator_init_data rx51_vaux3_mmc = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &rx51_vmmc2_supply, + .consumer_supplies = &rx51_vaux3_supply, }; static struct regulator_init_data rx51_vaux4 = { @@ -370,9 +442,9 @@ static struct regulator_init_data rx51_vmmc1 = { static struct regulator_init_data rx51_vmmc2 = { .constraints = { - .name = "VMMC2_30", - .min_uV = 1850000, - .max_uV = 3150000, + .name = "V28_A", + .min_uV = 2800000, + .max_uV = 3000000, .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, @@ -380,8 +452,8 @@ static struct regulator_init_data rx51_vmmc2 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &rx51_vmmc2_supply, + .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc2_supplies), + .consumer_supplies = rx51_vmmc2_supplies, }; static struct regulator_init_data rx51_vsim = { @@ -411,6 +483,20 @@ static struct regulator_init_data rx51_vdac = { }, }; +static struct regulator_init_data rx51_vio = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(rx51_vio_supplies), + .consumer_supplies = rx51_vio_supplies, +}; + static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) { /* FIXME this gpio setup is just a placeholder for now */ @@ -618,6 +704,7 @@ static struct twl4030_platform_data rx51_twldata __initdata = { .vmmc1 = &rx51_vmmc1, .vsim = &rx51_vsim, .vdac = &rx51_vdac, + .vio = &rx51_vio, }; static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = { @@ -629,18 +716,27 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = { }, }; +static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { + { + I2C_BOARD_INFO("tlv320aic3x", 0x18), + }, +}; + static int __init rx51_i2c_init(void) { if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || - system_rev >= SYSTEM_REV_B_USES_VAUX3) + system_rev >= SYSTEM_REV_B_USES_VAUX3) { rx51_twldata.vaux3 = &rx51_vaux3_mmc; - else { + /* Only older boards use VMMC2 for internal MMC */ + rx51_vmmc2.num_consumer_supplies--; + } else { rx51_twldata.vaux3 = &rx51_vaux3_cam; - rx51_twldata.vmmc2 = &rx51_vmmc2; } + rx51_twldata.vmmc2 = &rx51_vmmc2; omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1, - ARRAY_SIZE(rx51_peripherals_i2c_board_info_1)); - omap_register_i2c_bus(2, 100, NULL, 0); + ARRAY_SIZE(rx51_peripherals_i2c_board_info_1)); + omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, + ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); omap_register_i2c_bus(3, 400, NULL, 0); return 0; } |