1 files changed, 0 insertions, 135 deletions

diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
deleted file mode 100644
index a9e86db5daf9..000000000000
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * OMAP3-specific clock framework functions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "clock.h"
-#include "clock3xxx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm-regbits-34xx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/*
- * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
- * that are sourced by DPLL5, and both of these require this clock
- * to be at 120 MHz for proper operation.
- */
-#define DPLL5_FREQ_FOR_USBHOST		120000000
-
-/* needed by omap3_core_dpll_m2_set_rate() */
-struct clk *sdrc_ick_p, *arm_fck_p;
-
-/**
- * omap3_dpll4_set_rate - set rate for omap3 per-dpll
- * @hw: clock to change
- * @rate: target rate for clock
- * @parent_rate: rate of the parent clock
- *
- * Check if the current SoC supports the per-dpll reprogram operation
- * or not, and then do the rate change if supported. Returns -EINVAL
- * if not supported, 0 for success, and potential error codes from the
- * clock rate change.
- */
-int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
-				unsigned long parent_rate)
-{
-	/*
-	 * According to the 12-5 CDP code from TI, "Limitation 2.5"
-	 * on 3430ES1 prevents us from changing DPLL multipliers or dividers
-	 * on DPLL4.
-	 */
-	if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
-		pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
-		return -EINVAL;
-	}
-
-	return omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
-}
-
-/**
- * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll
- * @hw: clock to change
- * @rate: target rate for clock
- * @parent_rate: rate of the parent clock
- * @index: parent index, 0 - reference clock, 1 - bypass clock
- *
- * Check if the current SoC support the per-dpll reprogram operation
- * or not, and then do the rate + parent change if supported. Returns
- * -EINVAL if not supported, 0 for success, and potential error codes
- * from the clock rate change.
- */
-int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
-				    unsigned long parent_rate, u8 index)
-{
-	if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
-		pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
-		return -EINVAL;
-	}
-
-	return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate,
-						      index);
-}
-
-void __init omap3_clk_lock_dpll5(void)
-{
-	struct clk *dpll5_clk;
-	struct clk *dpll5_m2_clk;
-
-	dpll5_clk = clk_get(NULL, "dpll5_ck");
-	clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
-	clk_prepare_enable(dpll5_clk);
-
-	/* Program dpll5_m2_clk divider for no division */
-	dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
-	clk_prepare_enable(dpll5_m2_clk);
-	clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
-
-	clk_disable_unprepare(dpll5_m2_clk);
-	clk_disable_unprepare(dpll5_clk);
-	return;
-}
-
-/* Common clock code */
-
-/*
- * Switch the MPU rate if specified on cmdline.  We cannot do this
- * early until cmdline is parsed.  XXX This should be removed from the
- * clock code and handled by the OPP layer code in the near future.
- */
-static int __init omap3xxx_clk_arch_init(void)
-{
-	int ret;
-
-	if (!cpu_is_omap34xx())
-		return 0;
-
-	ret = omap2_clk_switch_mpurate_at_boot("dpll1_ck");
-	if (!ret)
-		omap2_clk_print_new_rates("osc_sys_ck", "core_ck", "arm_fck");
-
-	return ret;
-}
-
-omap_arch_initcall(omap3xxx_clk_arch_init);
-
-