diff options
Diffstat (limited to 'arch/arm/mach-omap2/omap_hwmod.h')
| -rw-r--r-- | arch/arm/mach-omap2/omap_hwmod.h | 9 |
1 files changed, 7 insertions, 2 deletions
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index d43d9b608eda..d5dc935f6060 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -427,8 +427,8 @@ struct omap_hwmod_omap4_prcm { * * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out * of idle, rather than relying on module smart-idle - * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out - * of standby, rather than relying on module smart-standby + * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and + * out of standby, rather than relying on module smart-standby * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for * SDRAM controller, etc. XXX probably belongs outside the main hwmod file * XXX Should be HWMOD_SETUP_NO_RESET @@ -459,6 +459,10 @@ struct omap_hwmod_omap4_prcm { * correctly, or this is being abused to deal with some PM latency * issues -- but we're currently suffering from a shortage of * folks who are able to track these issues down properly. + * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device + * is kept in force-standby mode. Failing to do so causes PM problems + * with musb on OMAP3630 at least. Note that musb has a dedicated register + * to control MSTANDBY signal when MIDLEMODE is set to force-standby. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -471,6 +475,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_16BIT_REG (1 << 8) #define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) #define HWMOD_BLOCK_WFI (1 << 10) +#define HWMOD_FORCE_MSTANDBY (1 << 11) /* * omap_hwmod._int_flags definitions |