1 files changed, 1 insertions, 92 deletions

diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index a2a04bfa9628..faec860ebc0e 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -1,7 +1,7 @@
 /*
  * OMAP4 PRM module functions
  *
- * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2011 Texas Instruments, Inc.
  * Copyright (C) 2010 Nokia Corporation
  * Benoît Cousson
  * Paul Walmsley
@@ -24,12 +24,6 @@
 #include "prm44xx.h"
 #include "prm-regbits-44xx.h"
 
-/*
- * Address offset (in bytes) between the reset control and the reset
- * status registers: 4 bytes on OMAP4
- */
-#define OMAP4_RST_CTRL_ST_OFFSET		4
-
 /* PRM low-level functions */
 
 /* Read a register in a CM/PRM instance in the PRM module */
@@ -94,91 +88,6 @@ u32 omap4_prm_clear_inst_reg_bits(u32 bits, s16 inst, s16 reg)
 	return omap4_prm_rmw_inst_reg_bits(bits, 0x0, inst, reg);
 }
 
-/**
- * omap4_prm_is_hardreset_asserted - read the HW reset line state of
- * submodules contained in the hwmod module
- * @rstctrl_reg: RM_RSTCTRL register address for this module
- * @shift: register bit shift corresponding to the reset line to check
- *
- * Returns 1 if the (sub)module hardreset line is currently asserted,
- * 0 if the (sub)module hardreset line is not currently asserted, or
- * -EINVAL upon parameter error.
- */
-int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift)
-{
-	if (!cpu_is_omap44xx() || !rstctrl_reg)
-		return -EINVAL;
-
-	return omap4_prm_read_bits_shift(rstctrl_reg, (1 << shift));
-}
-
-/**
- * omap4_prm_assert_hardreset - assert the HW reset line of a submodule
- * @rstctrl_reg: RM_RSTCTRL register address for this module
- * @shift: register bit shift corresponding to the reset line to assert
- *
- * Some IPs like dsp, ipu or iva contain processors that require an HW
- * reset line to be asserted / deasserted in order to fully enable the
- * IP.  These modules may have multiple hard-reset lines that reset
- * different 'submodules' inside the IP block.  This function will
- * place the submodule into reset.  Returns 0 upon success or -EINVAL
- * upon an argument error.
- */
-int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift)
-{
-	u32 mask;
-
-	if (!cpu_is_omap44xx() || !rstctrl_reg)
-		return -EINVAL;
-
-	mask = 1 << shift;
-	omap4_prm_rmw_reg_bits(mask, mask, rstctrl_reg);
-
-	return 0;
-}
-
-/**
- * omap4_prm_deassert_hardreset - deassert a submodule hardreset line and wait
- * @rstctrl_reg: RM_RSTCTRL register address for this module
- * @shift: register bit shift corresponding to the reset line to deassert
- *
- * Some IPs like dsp, ipu or iva contain processors that require an HW
- * reset line to be asserted / deasserted in order to fully enable the
- * IP.  These modules may have multiple hard-reset lines that reset
- * different 'submodules' inside the IP block.  This function will
- * take the submodule out of reset and wait until the PRCM indicates
- * that the reset has completed before returning.  Returns 0 upon success or
- * -EINVAL upon an argument error, -EEXIST if the submodule was already out
- * of reset, or -EBUSY if the submodule did not exit reset promptly.
- */
-int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift)
-{
-	u32 mask;
-	void __iomem *rstst_reg;
-	int c;
-
-	if (!cpu_is_omap44xx() || !rstctrl_reg)
-		return -EINVAL;
-
-	rstst_reg = rstctrl_reg + OMAP4_RST_CTRL_ST_OFFSET;
-
-	mask = 1 << shift;
-
-	/* Check the current status to avoid de-asserting the line twice */
-	if (omap4_prm_read_bits_shift(rstctrl_reg, mask) == 0)
-		return -EEXIST;
-
-	/* Clear the reset status by writing 1 to the status bit */
-	omap4_prm_rmw_reg_bits(0xffffffff, mask, rstst_reg);
-	/* de-assert the reset control line */
-	omap4_prm_rmw_reg_bits(mask, 0, rstctrl_reg);
-	/* wait the status to be set */
-	omap_test_timeout(omap4_prm_read_bits_shift(rstst_reg, mask),
-			  MAX_MODULE_HARDRESET_WAIT, c);
-
-	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
-}
-
 void omap4_prm_global_warm_sw_reset(void)
 {
 	u32 v;