diff options
Diffstat (limited to 'arch/arm/mach-omap2')
| -rw-r--r-- | arch/arm/mach-omap2/Kconfig | 12 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-3430sdp.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-4430sdp.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-ldp.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3beagle.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3evm.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3pandora.c | 80 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-rx51-peripherals.c | 82 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-rx51.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-zoom2.c | 93 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/clock24xx.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/clock34xx.c | 37 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/clock34xx.h | 4 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/clockdomain.c | 74 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/gpmc.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/io.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/mailbox.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/pm-debug.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/pm34xx.c | 188 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/powerdomain.c | 39 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/serial.c | 10 |
21 files changed, 370 insertions, 275 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 75b1c7efae7e..aad194f61a33 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -73,9 +73,21 @@ config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX +config MACH_NOKIA_N800 + bool + +config MACH_NOKIA_N810 + bool + +config MACH_NOKIA_N810_WIMAX + bool + config MACH_NOKIA_N8X0 bool "Nokia N800/N810" depends on ARCH_OMAP2420 + select MACH_NOKIA_N800 + select MACH_NOKIA_N810 + select MACH_NOKIA_N810_WIMAX config MACH_NOKIA_RX51 bool "Nokia RX-51 board" diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index efaf053eba85..0acb5560229c 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -17,6 +17,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/i2c/twl4030.h> @@ -38,7 +39,6 @@ #include <mach/gpmc.h> #include <mach/control.h> -#include <mach/keypad.h> #include <mach/gpmc-smc91x.h> #include "sdram-qimonda-hyb18m512160af-6.h" diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index eb37c40ea83a..609a5a4a7e29 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -58,6 +58,8 @@ static void __init gic_init_irq(void) static void __init omap_4430sdp_init_irq(void) { + omap_board_config = sdp4430_config; + omap_board_config_size = ARRAY_SIZE(sdp4430_config); omap2_init_common_hw(NULL, NULL); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(1); @@ -70,8 +72,6 @@ static void __init omap_4430sdp_init_irq(void) static void __init omap_4430sdp_init(void) { platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); - omap_board_config = sdp4430_config; - omap_board_config_size = ARRAY_SIZE(sdp4430_config); omap_serial_init(); } diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d110a7fdfbd8..d57ec2f4d0a9 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/gpio_keys.h> #include <linux/workqueue.h> #include <linux/err.h> @@ -41,7 +42,6 @@ #include <asm/delay.h> #include <mach/control.h> #include <mach/usb.h> -#include <mach/keypad.h> #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 70df6b4dbcd4..08b0816afa61 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -162,7 +162,7 @@ static int beagle_twl_gpio_setup(struct device *dev, /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index e4ec0c591216..4c4d7f8dbd72 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -20,6 +20,7 @@ #include <linux/clk.h> #include <linux/gpio.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/leds.h> #include <linux/spi/spi.h> @@ -37,7 +38,6 @@ #include <mach/usb.h> #include <mach/common.h> #include <mach/mcspi.h> -#include <mach/keypad.h> #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 7f6bf8772af7..7519edb69155 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -27,6 +27,7 @@ #include <linux/i2c/twl4030.h> #include <linux/leds.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/gpio_keys.h> #include <asm/mach-types.h> @@ -39,7 +40,6 @@ #include <mach/hardware.h> #include <mach/mcspi.h> #include <mach/usb.h> -#include <mach/keypad.h> #include <mach/mux.h> #include "sdram-micron-mt46h32m32lf-6.h" @@ -134,50 +134,50 @@ static void __init pandora_keys_gpio_init(void) } static int board_keymap[] = { - /* col, row, code */ + /* row, col, code */ KEY(0, 0, KEY_9), - KEY(0, 1, KEY_0), - KEY(0, 2, KEY_BACKSPACE), - KEY(0, 3, KEY_O), - KEY(0, 4, KEY_P), - KEY(0, 5, KEY_K), - KEY(0, 6, KEY_L), - KEY(0, 7, KEY_ENTER), - KEY(1, 0, KEY_8), + KEY(0, 1, KEY_8), + KEY(0, 2, KEY_I), + KEY(0, 3, KEY_J), + KEY(0, 4, KEY_N), + KEY(0, 5, KEY_M), + KEY(1, 0, KEY_0), KEY(1, 1, KEY_7), - KEY(1, 2, KEY_6), - KEY(1, 3, KEY_5), - KEY(1, 4, KEY_4), - KEY(1, 5, KEY_3), - KEY(1, 6, KEY_2), - KEY(1, 7, KEY_1), - KEY(2, 0, KEY_I), - KEY(2, 1, KEY_U), + KEY(1, 2, KEY_U), + KEY(1, 3, KEY_H), + KEY(1, 4, KEY_B), + KEY(1, 5, KEY_SPACE), + KEY(2, 0, KEY_BACKSPACE), + KEY(2, 1, KEY_6), KEY(2, 2, KEY_Y), - KEY(2, 3, KEY_T), - KEY(2, 4, KEY_R), - KEY(2, 5, KEY_E), - KEY(2, 6, KEY_W), - KEY(2, 7, KEY_Q), - KEY(3, 0, KEY_J), - KEY(3, 1, KEY_H), - KEY(3, 2, KEY_G), + KEY(2, 3, KEY_G), + KEY(2, 4, KEY_V), + KEY(2, 5, KEY_FN), + KEY(3, 0, KEY_O), + KEY(3, 1, KEY_5), + KEY(3, 2, KEY_T), KEY(3, 3, KEY_F), - KEY(3, 4, KEY_D), - KEY(3, 5, KEY_S), - KEY(3, 6, KEY_A), - KEY(3, 7, KEY_LEFTSHIFT), - KEY(4, 0, KEY_N), - KEY(4, 1, KEY_B), - KEY(4, 2, KEY_V), - KEY(4, 3, KEY_C), + KEY(3, 4, KEY_C), + KEY(4, 0, KEY_P), + KEY(4, 1, KEY_4), + KEY(4, 2, KEY_R), + KEY(4, 3, KEY_D), KEY(4, 4, KEY_X), - KEY(4, 5, KEY_Z), - KEY(4, 6, KEY_DOT), - KEY(4, 7, KEY_COMMA), - KEY(5, 0, KEY_M), - KEY(5, 1, KEY_SPACE), - KEY(5, 2, KEY_FN), + KEY(5, 0, KEY_K), + KEY(5, 1, KEY_3), + KEY(5, 2, KEY_E), + KEY(5, 3, KEY_S), + KEY(5, 4, KEY_Z), + KEY(6, 0, KEY_L), + KEY(6, 1, KEY_2), + KEY(6, 2, KEY_W), + KEY(6, 3, KEY_A), + KEY(6, 4, KEY_DOT), + KEY(7, 0, KEY_ENTER), + KEY(7, 1, KEY_1), + KEY(7, 2, KEY_Q), + KEY(7, 3, KEY_LEFTSHIFT), + KEY(7, 4, KEY_COMMA), }; static struct matrix_keymap_data board_map_data = { diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index b45ad312c587..e34d96a825e3 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> #include <linux/i2c.h> #include <linux/i2c/twl4030.h> @@ -27,7 +28,6 @@ #include <mach/common.h> #include <mach/dma.h> #include <mach/gpmc.h> -#include <mach/keypad.h> #include <mach/onenand.h> #include <mach/gpmc-smc91x.h> @@ -38,49 +38,49 @@ static int board_keymap[] = { KEY(0, 0, KEY_Q), - KEY(0, 1, KEY_W), - KEY(0, 2, KEY_E), - KEY(0, 3, KEY_R), - KEY(0, 4, KEY_T), - KEY(0, 5, KEY_Y), - KEY(0, 6, KEY_U), - KEY(0, 7, KEY_I), - KEY(1, 0, KEY_O), + KEY(0, 1, KEY_O), + KEY(0, 2, KEY_P), + KEY(0, 3, KEY_COMMA), + KEY(0, 4, KEY_BACKSPACE), + KEY(0, 6, KEY_A), + KEY(0, 7, KEY_S), + KEY(1, 0, KEY_W), KEY(1, 1, KEY_D), - KEY(1, 2, KEY_DOT), - KEY(1, 3, KEY_V), - KEY(1, 4, KEY_DOWN), - KEY(2, 0, KEY_P), - KEY(2, 1, KEY_F), + KEY(1, 2, KEY_F), + KEY(1, 3, KEY_G), + KEY(1, 4, KEY_H), + KEY(1, 5, KEY_J), + KEY(1, 6, KEY_K), + KEY(1, 7, KEY_L), + KEY(2, 0, KEY_E), + KEY(2, 1, KEY_DOT), KEY(2, 2, KEY_UP), - KEY(2, 3, KEY_B), - KEY(2, 4, KEY_RIGHT), - KEY(3, 0, KEY_COMMA), - KEY(3, 1, KEY_G), - KEY(3, 2, KEY_ENTER), + KEY(2, 3, KEY_ENTER), + KEY(2, 5, KEY_Z), + KEY(2, 6, KEY_X), + KEY(2, 7, KEY_C), + KEY(3, 0, KEY_R), + KEY(3, 1, KEY_V), + KEY(3, 2, KEY_B), KEY(3, 3, KEY_N), - KEY(4, 0, KEY_BACKSPACE), - KEY(4, 1, KEY_H), - KEY(4, 3, KEY_M), + KEY(3, 4, KEY_M), + KEY(3, 5, KEY_SPACE), + KEY(3, 6, KEY_SPACE), + KEY(3, 7, KEY_LEFT), + KEY(4, 0, KEY_T), + KEY(4, 1, KEY_DOWN), + KEY(4, 2, KEY_RIGHT), KEY(4, 4, KEY_LEFTCTRL), - KEY(5, 1, KEY_J), - KEY(5, 2, KEY_Z), - KEY(5, 3, KEY_SPACE), - KEY(5, 4, KEY_LEFTSHIFT), - KEY(6, 0, KEY_A), - KEY(6, 1, KEY_K), - KEY(6, 2, KEY_X), - KEY(6, 3, KEY_SPACE), - KEY(6, 4, KEY_FN), - KEY(7, 0, KEY_S), - KEY(7, 1, KEY_L), - KEY(7, 2, KEY_C), - KEY(7, 3, KEY_LEFT), - KEY(0xff, 0, KEY_F6), - KEY(0xff, 1, KEY_F7), - KEY(0xff, 2, KEY_F8), - KEY(0xff, 4, KEY_F9), - KEY(0xff, 5, KEY_F10), + KEY(4, 5, KEY_RIGHTALT), + KEY(4, 6, KEY_LEFTSHIFT), + KEY(5, 0, KEY_Y), + KEY(6, 0, KEY_U), + KEY(7, 0, KEY_I), + KEY(7, 1, KEY_F7), + KEY(7, 2, KEY_F8), + KEY(0xff, 2, KEY_F9), + KEY(0xff, 4, KEY_F10), + KEY(0xff, 5, KEY_F11), }; static struct matrix_keymap_data board_map_data = { @@ -444,7 +444,7 @@ static int __init rx51_i2c_init(void) rx51_twldata.vaux3 = &rx51_vaux3_cam; rx51_twldata.vmmc2 = &rx51_vmmc2; } - omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1, + omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1, ARRAY_SIZE(rx51_peripherals_i2c_board_info_1)); omap_register_i2c_bus(2, 100, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index f9196c3b1a7b..78869a9a1cc2 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -26,7 +26,6 @@ #include <mach/mux.h> #include <mach/board.h> #include <mach/common.h> -#include <mach/keypad.h> #include <mach/dma.h> #include <mach/gpmc.h> #include <mach/usb.h> diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index b7b32208ced7..51e0b3ba5f3a 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/gpio.h> #include <linux/i2c/twl4030.h> #include <linux/regulator/machine.h> @@ -22,64 +23,63 @@ #include <mach/common.h> #include <mach/usb.h> -#include <mach/keypad.h> #include "mmc-twl4030.h" +#include "sdram-micron-mt46h32m32lf-6.h" /* Zoom2 has Qwerty keyboard*/ static int board_keymap[] = { KEY(0, 0, KEY_E), - KEY(1, 0, KEY_R), - KEY(2, 0, KEY_T), - KEY(3, 0, KEY_HOME), - KEY(6, 0, KEY_I), - KEY(7, 0, KEY_LEFTSHIFT), - KEY(0, 1, KEY_D), + KEY(0, 1, KEY_R), + KEY(0, 2, KEY_T), + KEY(0, 3, KEY_HOME), + KEY(0, 6, KEY_I), + KEY(0, 7, KEY_LEFTSHIFT), + KEY(1, 0, KEY_D), KEY(1, 1, KEY_F), - KEY(2, 1, KEY_G), - KEY(3, 1, KEY_SEND), - KEY(6, 1, KEY_K), - KEY(7, 1, KEY_ENTER), - KEY(0, 2, KEY_X), - KEY(1, 2, KEY_C), + KEY(1, 2, KEY_G), + KEY(1, 3, KEY_SEND), + KEY(1, 6, KEY_K), + KEY(1, 7, KEY_ENTER), + KEY(2, 0, KEY_X), + KEY(2, 1, KEY_C), KEY(2, 2, KEY_V), - KEY(3, 2, KEY_END), - KEY(6, 2, KEY_DOT), - KEY(7, 2, KEY_CAPSLOCK), - KEY(0, 3, KEY_Z), - KEY(1, 3, KEY_KPPLUS), - KEY(2, 3, KEY_B), + KEY(2, 3, KEY_END), + KEY(2, 6, KEY_DOT), + KEY(2, 7, KEY_CAPSLOCK), + KEY(3, 0, KEY_Z), + KEY(3, 1, KEY_KPPLUS), + KEY(3, 2, KEY_B), KEY(3, 3, KEY_F1), - KEY(6, 3, KEY_O), - KEY(7, 3, KEY_SPACE), - KEY(0, 4, KEY_W), - KEY(1, 4, KEY_Y), - KEY(2, 4, KEY_U), - KEY(3, 4, KEY_F2), + KEY(3, 6, KEY_O), + KEY(3, 7, KEY_SPACE), + KEY(4, 0, KEY_W), + KEY(4, 1, KEY_Y), + KEY(4, 2, KEY_U), + KEY(4, 3, KEY_F2), KEY(4, 4, KEY_VOLUMEUP), - KEY(6, 4, KEY_L), - KEY(7, 4, KEY_LEFT), - KEY(0, 5, KEY_S), - KEY(1, 5, KEY_H), - KEY(2, 5, KEY_J), - KEY(3, 5, KEY_F3), + KEY(4, 6, KEY_L), + KEY(4, 7, KEY_LEFT), + KEY(5, 0, KEY_S), + KEY(5, 1, KEY_H), + KEY(5, 2, KEY_J), + KEY(5, 3, KEY_F3), KEY(5, 5, KEY_VOLUMEDOWN), - KEY(6, 5, KEY_M), - KEY(4, 5, KEY_ENTER), - KEY(7, 5, KEY_RIGHT), - KEY(0, 6, KEY_Q), - KEY(1, 6, KEY_A), - KEY(2, 6, KEY_N), - KEY(3, 6, KEY_BACKSPACE), + KEY(5, 6, KEY_M), + KEY(5, 7, KEY_ENTER), + KEY(6, 0, KEY_Q), + KEY(6, 1, KEY_A), + KEY(6, 2, KEY_N), + KEY(6, 3, KEY_BACKSPACE), KEY(6, 6, KEY_P), - KEY(7, 6, KEY_UP), KEY(6, 7, KEY_SELECT), - KEY(7, 7, KEY_DOWN), - KEY(0, 7, KEY_PROG1), /*MACRO 1 <User defined> */ - KEY(1, 7, KEY_PROG2), /*MACRO 2 <User defined> */ - KEY(2, 7, KEY_PROG3), /*MACRO 3 <User defined> */ - KEY(3, 7, KEY_PROG4), /*MACRO 4 <User defined> */ - 0 + KEY(7, 0, KEY_PROG1), /*MACRO 1 <User defined> */ + KEY(7, 1, KEY_PROG2), /*MACRO 2 <User defined> */ + KEY(7, 2, KEY_PROG3), /*MACRO 3 <User defined> */ + KEY(7, 3, KEY_PROG4), /*MACRO 4 <User defined> */ + KEY(7, 5, KEY_RIGHT), + KEY(7, 6, KEY_UP), + KEY(7, 7, KEY_DOWN) }; static struct matrix_keymap_data board_map_data = { @@ -213,7 +213,8 @@ static void __init omap_zoom2_init_irq(void) { omap_board_config = zoom2_config; omap_board_config_size = ARRAY_SIZE(zoom2_config); - omap2_init_common_hw(NULL, NULL); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index bc5d3ac66611..e2dbedd581e8 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -769,6 +769,7 @@ int __init omap2_clk_init(void) if (c->cpu & cpu_mask) { clkdev_add(&c->lk); clk_register(c->lk.clk); + omap2_init_clk_clkdm(c->lk.clk); } /* Check the MPU rate set by bootloader */ diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index fafcd32e6907..7c5c00df3c70 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -338,6 +338,13 @@ static struct omap_clk omap34xx_clks[] = { */ #define SDRC_MPURATE_LOOPS 96 +/* + * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks + * that are sourced by DPLL5, and both of these require this clock + * to be at 120 MHz for proper operation. + */ +#define DPLL5_FREQ_FOR_USBHOST 120000000 + /** * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI * @clk: struct clk * being enabled @@ -466,7 +473,7 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n) unsigned long fint; u16 f = 0; - fint = clk->dpll_data->clk_ref->rate / (n + 1); + fint = clk->dpll_data->clk_ref->rate / n; pr_debug("clock: fint is %lu\n", fint); @@ -1056,6 +1063,28 @@ void omap2_clk_prepare_for_reboot(void) #endif } +static void omap3_clk_lock_dpll5(void) +{ + struct clk *dpll5_clk; + struct clk *dpll5_m2_clk; + + dpll5_clk = clk_get(NULL, "dpll5_ck"); + clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST); + clk_enable(dpll5_clk); + + /* Enable autoidle to allow it to enter low power bypass */ + omap3_dpll_allow_idle(dpll5_clk); + + /* Program dpll5_m2_clk divider for no division */ + dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck"); + clk_enable(dpll5_m2_clk); + clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST); + + clk_disable(dpll5_m2_clk); + clk_disable(dpll5_clk); + return; +} + /* REVISIT: Move this init stuff out into clock.c */ /* @@ -1148,6 +1177,12 @@ int __init omap2_clk_init(void) */ clk_enable_init_clocks(); + /* + * Lock DPLL5 and put it in autoidle. + */ + if (omap_rev() >= OMAP3430_REV_ES2_0) + omap3_clk_lock_dpll5(); + /* Avoid sleeping during omap2_clk_prepare_for_reboot() */ /* REVISIT: not yet ready for 343x */ #if 0 diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index c8119781e00a..9565c05bebd2 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -489,9 +489,9 @@ static struct clk core_ck = { static struct clk dpll3_m2x2_ck = { .name = "dpll3_m2x2_ck", .ops = &clkops_null, - .parent = &dpll3_x2_ck, + .parent = &dpll3_m2_ck, .clkdm_name = "dpll3_clkdm", - .recalc = &followparent_recalc, + .recalc = &omap3_clkoutx2_recalc, }; /* The PWRDN bit is apparently only available on 3430ES2 and above */ diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 4ef7b4f5474e..58aff8485df9 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -137,6 +137,36 @@ static void _clkdm_del_autodeps(struct clockdomain *clkdm) } } +/* + * _omap2_clkdm_set_hwsup - set the hwsup idle transition bit + * @clkdm: struct clockdomain * + * @enable: int 0 to disable, 1 to enable + * + * Internal helper for actually switching the bit that controls hwsup + * idle transitions for clkdm. + */ +static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable) +{ + u32 v; + + if (cpu_is_omap24xx()) { + if (enable) + v = OMAP24XX_CLKSTCTRL_ENABLE_AUTO; + else + v = OMAP24XX_CLKSTCTRL_DISABLE_AUTO; + } else if (cpu_is_omap34xx()) { + if (enable) + v = OMAP34XX_CLKSTCTRL_ENABLE_AUTO; + else + v = OMAP34XX_CLKSTCTRL_DISABLE_AUTO; + } else { + BUG(); + } + + cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, + v << __ffs(clkdm->clktrctrl_mask), + clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL); +} static struct clockdomain *_clkdm_lookup(const char *name) { @@ -456,8 +486,6 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm) */ void omap2_clkdm_allow_idle(struct clockdomain *clkdm) { - u32 v; - if (!clkdm) return; @@ -473,18 +501,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm) if (atomic_read(&clkdm->usecount) > 0) _clkdm_add_autodeps(clkdm); - if (cpu_is_omap24xx()) - v = OMAP24XX_CLKSTCTRL_ENABLE_AUTO; - else if (cpu_is_omap34xx()) - v = OMAP34XX_CLKSTCTRL_ENABLE_AUTO; - else - BUG(); - - - cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, - v << __ffs(clkdm->clktrctrl_mask), - clkdm->pwrdm.ptr->prcm_offs, - CM_CLKSTCTRL); + _omap2_clkdm_set_hwsup(clkdm, 1); pwrdm_clkdm_state_switch(clkdm); } @@ -500,8 +517,6 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm) */ void omap2_clkdm_deny_idle(struct clockdomain *clkdm) { - u32 v; - if (!clkdm) return; @@ -514,16 +529,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm) pr_debug("clockdomain: disabling automatic idle transitions for %s\n", clkdm->name); - if (cpu_is_omap24xx()) - v = OMAP24XX_CLKSTCTRL_DISABLE_AUTO; - else if (cpu_is_omap34xx()) - v = OMAP34XX_CLKSTCTRL_DISABLE_AUTO; - else - BUG(); - - cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, - v << __ffs(clkdm->clktrctrl_mask), - clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL); + _omap2_clkdm_set_hwsup(clkdm, 0); if (atomic_read(&clkdm->usecount) > 0) _clkdm_del_autodeps(clkdm); @@ -569,10 +575,14 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) v = omap2_clkdm_clktrctrl_read(clkdm); if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) || - (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) + (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) { + /* Disable HW transitions when we are changing deps */ + _omap2_clkdm_set_hwsup(clkdm, 0); _clkdm_add_autodeps(clkdm); - else + _omap2_clkdm_set_hwsup(clkdm, 1); + } else { omap2_clkdm_wakeup(clkdm); + } pwrdm_wait_transition(clkdm->pwrdm.ptr); pwrdm_clkdm_state_switch(clkdm); @@ -623,10 +633,14 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk) v = omap2_clkdm_clktrctrl_read(clkdm); if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) || - (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) + (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) { + /* Disable HW transitions when we are changing deps */ + _omap2_clkdm_set_hwsup(clkdm, 0); _clkdm_del_autodeps(clkdm); - else + _omap2_clkdm_set_hwsup(clkdm, 1); + } else { omap2_clkdm_sleep(clkdm); + } pwrdm_clkdm_state_switch(clkdm); diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 15876828db23..f3c992e29651 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -366,7 +366,7 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base) if (r < 0) goto out; - gpmc_cs_enable_mem(cs, res->start, res->end - res->start + 1); + gpmc_cs_enable_mem(cs, res->start, resource_size(res)); *base = res->start; gpmc_cs_set_reserved(cs, 1); out: @@ -378,7 +378,7 @@ EXPORT_SYMBOL(gpmc_cs_request); void gpmc_cs_free(int cs) { spin_lock(&gpmc_mem_lock); - if (cs >= GPMC_CS_NUM || !gpmc_cs_reserved(cs)) { + if (cs >= GPMC_CS_NUM || cs < 0 || !gpmc_cs_reserved(cs)) { printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs); BUG(); spin_unlock(&gpmc_mem_lock); diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index e3a3bad1d84f..56be87d13edb 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -302,7 +302,9 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); +#endif omap_serial_early_init(); +#ifndef CONFIG_ARCH_OMAP4 omap_hwmod_late_init(); omap_pm_if_init(); omap2_sdrc_init(sdrc_cs0, sdrc_cs1); diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index c035ad3426d0..ef57b38a56a4 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -300,7 +300,7 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev) dev_err(&pdev->dev, "invalid mem resource\n"); return -ENODEV; } - mbox_base = ioremap(res->start, res->end - res->start); + mbox_base = ioremap(res->start, resource_size(res)); if (!mbox_base) return -ENOMEM; diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 1b4c1600f8d8..2fc4d6abbd0a 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -541,7 +541,7 @@ static int __init pm_dbg_init(void) printk(KERN_ERR "%s: only OMAP3 supported\n", __func__); return -ENODEV; } - + d = debugfs_create_dir("pm_debug", NULL); if (IS_ERR(d)) return PTR_ERR(d); @@ -551,7 +551,7 @@ static int __init pm_dbg_init(void) (void) debugfs_create_file("time", S_IRUGO, d, (void *)DEBUG_FILE_TIMERS, &debug_fops); - pwrdm_for_each(pwrdms_setup, (void *)d); + pwrdm_for_each_nolock(pwrdms_setup, (void *)d); pm_dbg_dir = debugfs_create_dir("registers", d); if (IS_ERR(pm_dbg_dir)) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 0ff5a6c53aa0..89463190923a 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -51,97 +51,112 @@ static void (*_omap_sram_idle)(u32 *addr, int save_state); static struct powerdomain *mpu_pwrdm; -/* PRCM Interrupt Handler for wakeups */ -static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) +/* + * PRCM Interrupt Handler Helper Function + * + * The purpose of this function is to clear any wake-up events latched + * in the PRCM PM_WKST_x registers. It is possible that a wake-up event + * may occur whilst attempting to clear a PM_WKST_x register and thus + * set another bit in this register. A while loop is used to ensure + * that any peripheral wake-up events occurring while attempting to + * clear the PM_WKST_x are detected and cleared. + */ +static int prcm_clear_mod_irqs(s16 module, u8 regs) { - u32 wkst, irqstatus_mpu; - u32 fclk, iclk; - - /* WKUP */ - wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST); + u32 wkst, fclk, iclk, clken; + u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1; + u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1; + u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1; + u16 grpsel_off = (regs == 3) ? + OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL; + int c = 0; + + wkst = prm_read_mod_reg(module, wkst_off); + wkst &= prm_read_mod_reg(module, grpsel_off); if (wkst) { - iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN); - fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN); - cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN); - cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN); - prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST); - while (prm_read_mod_reg(WKUP_MOD, PM_WKST)) - cpu_relax(); - cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN); - cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN); + iclk = cm_read_mod_reg(module, iclk_off); + fclk = cm_read_mod_reg(module, fclk_off); + while (wkst) { + clken = wkst; + cm_set_mod_reg_bits(clken, module, iclk_off); + /* + * For USBHOST, we don't know whether HOST1 or + * HOST2 woke us up, so enable both f-clocks + */ + if (module == OMAP3430ES2_USBHOST_MOD) + clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT; + cm_set_mod_reg_bits(clken, module, fclk_off); + prm_write_mod_reg(wkst, module, wkst_off); + wkst = prm_read_mod_reg(module, wkst_off); + c++; + } + cm_write_mod_reg(iclk, module, iclk_off); + cm_write_mod_reg(fclk, module, fclk_off); } - /* CORE */ - wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1); - if (wkst) { - iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1); - fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); - cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1); - cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1); - prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1); - while (prm_read_mod_reg(CORE_MOD, PM_WKST1)) - cpu_relax(); - cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1); - cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1); - } - wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3); - if (wkst) { - iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3); - fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3); - cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3); - cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3); - prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3); - while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3)) - cpu_relax(); - cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3); - cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3); - } + return c; +} - /* PER */ - wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST); - if (wkst) { - iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN); - fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN); - cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN); - cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN); - prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST); - while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST)) - cpu_relax(); - cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN); - cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN); - } +static int _prcm_int_handle_wakeup(void) +{ + int c; + c = prcm_clear_mod_irqs(WKUP_MOD, 1); + c += prcm_clear_mod_irqs(CORE_MOD, 1); + c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1); if (omap_rev() > OMAP3430_REV_ES1_0) { - /* USBHOST */ - wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST); - if (wkst) { - iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, - CM_ICLKEN); - fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, - CM_FCLKEN); - cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD, - CM_ICLKEN); - cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD, - CM_FCLKEN); - prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD, - PM_WKST); - while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, - PM_WKST)) - cpu_relax(); - cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD, - CM_ICLKEN); - cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD, - CM_FCLKEN); - } + c += prcm_clear_mod_irqs(CORE_MOD, 3); + c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1); } - irqstatus_mpu = prm_read_mod_reg(OCP_MOD, - OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - prm_write_mod_reg(irqstatus_mpu, OCP_MOD, - OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + return c; +} + +/* + * PRCM Interrupt Handler + * + * The PRM_IRQSTATUS_MPU register indicates if there are any pending + * interrupts from the PRCM for the MPU. These bits must be cleared in + * order to clear the PRCM interrupt. The PRCM interrupt handler is + * implemented to simply clear the PRM_IRQSTATUS_MPU in order to clear + * the PRCM interrupt. Please note that bit 0 of the PRM_IRQSTATUS_MPU + * register indicates that a wake-up event is pending for the MPU and + * this bit can only be cleared if the all the wake-up events latched + * in the various PM_WKST_x registers have been cleared. The interrupt + * handler is implemented using a do-while loop so that if a wake-up + * event occurred during the processing of the prcm interrupt handler + * (setting a bit in the corresponding PM_WKST_x register and thus + * preventing us from clearing bit 0 of the PRM_IRQSTATUS_MPU register) + * this would be handled. + */ +static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) +{ + u32 irqstatus_mpu; + int c = 0; + + do { + irqstatus_mpu = prm_read_mod_reg(OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + + if (irqstatus_mpu & (OMAP3430_WKUP_ST | OMAP3430_IO_ST)) { + c = _prcm_int_handle_wakeup(); + + /* + * Is the MPU PRCM interrupt handler racing with the + * IVA2 PRCM interrupt handler ? + */ + WARN(c == 0, "prcm: WARNING: PRCM indicated MPU wakeup " + "but no wakeup sources are marked\n"); + } else { + /* XXX we need to expand our PRCM interrupt handler */ + WARN(1, "prcm: WARNING: PRCM interrupt received, but " + "no code to handle it (%08x)\n", irqstatus_mpu); + } + + prm_write_mod_reg(irqstatus_mpu, OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET)) - cpu_relax(); + } while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET)); return IRQ_HANDLED; } @@ -624,6 +639,17 @@ static void __init prcm_setup_regs(void) prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); + /* Enable wakeups in PER */ + prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 | + OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 | + OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3, + OMAP3430_PER_MOD, PM_WKEN); + /* and allow them to wake up MPU */ + prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 | + OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 | + OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3, + OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL); + /* Don't attach IVA interrupts */ prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 2594cbff3947..f00289abd30f 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -273,35 +273,50 @@ struct powerdomain *pwrdm_lookup(const char *name) } /** - * pwrdm_for_each - call function on each registered clockdomain + * pwrdm_for_each_nolock - call function on each registered clockdomain * @fn: callback function * * * Call the supplied function for each registered powerdomain. The * callback function can return anything but 0 to bail out early from - * the iterator. The callback function is called with the pwrdm_rwlock - * held for reading, so no powerdomain structure manipulation - * functions should be called from the callback, although hardware - * powerdomain control functions are fine. Returns the last return - * value of the callback function, which should be 0 for success or - * anything else to indicate failure; or -EINVAL if the function - * pointer is null. + * the iterator. Returns the last return value of the callback function, which + * should be 0 for success or anything else to indicate failure; or -EINVAL if + * the function pointer is null. */ -int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user), - void *user) +int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user), + void *user) { struct powerdomain *temp_pwrdm; - unsigned long flags; int ret = 0; if (!fn) return -EINVAL; - read_lock_irqsave(&pwrdm_rwlock, flags); list_for_each_entry(temp_pwrdm, &pwrdm_list, node) { ret = (*fn)(temp_pwrdm, user); if (ret) break; } + + return ret; +} + +/** + * pwrdm_for_each - call function on each registered clockdomain + * @fn: callback function * + * + * This function is the same as 'pwrdm_for_each_nolock()', but keeps the + * &pwrdm_rwlock locked for reading, so no powerdomain structure manipulation + * functions should be called from the callback, although hardware powerdomain + * control functions are fine. + */ +int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user), + void *user) +{ + unsigned long flags; + int ret; + + read_lock_irqsave(&pwrdm_rwlock, flags); + ret = pwrdm_for_each_nolock(fn, user); read_unlock_irqrestore(&pwrdm_rwlock, flags); return ret; diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index ae2186892c85..54dfeb5d5667 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -109,16 +109,6 @@ static struct plat_serial8250_port serial_platform_data2[] = { .regshift = 2, .uartclk = OMAP24XX_BASE_BAUD * 16, }, { -#ifdef CONFIG_ARCH_OMAP4 - .membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE), - .mapbase = OMAP_UART4_BASE, - .irq = 70, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP24XX_BASE_BAUD * 16, - }, { -#endif .flags = 0 } }; |