diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/mach-pxa/Makefile | 9 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/pxa25x.c | 182 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/pxa27x.c | 174 |
3 files changed, 6 insertions, 359 deletions
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index eb0bf7678a99..1566a27d5244 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -3,16 +3,15 @@ # # Common support (must be linked before board specific support) -obj-y += clock.o devices.o generic.o irq.o \ - reset.o +obj-y += devices.o generic.o irq.o reset.o obj-$(CONFIG_PM) += pm.o sleep.o standby.o # Generic drivers that other drivers may depend upon # SoC-specific code -obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o -obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o -obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o +obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o +obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o +obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o obj-$(CONFIG_CPU_PXA300) += pxa300.o obj-$(CONFIG_CPU_PXA320) += pxa320.o obj-$(CONFIG_CPU_PXA930) += pxa930.o diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 66e4a2b6316e..70e6d0ebe9e3 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -44,181 +44,6 @@ * Various clock factors driven by the CCCR register. */ -/* Crystal Frequency to Memory Frequency Multiplier (L) */ -static unsigned char L_clk_mult[32] = { 0, 27, 32, 36, 40, 45, 0, }; - -/* Memory Frequency to Run Mode Frequency Multiplier (M) */ -static unsigned char M_clk_mult[4] = { 0, 1, 2, 4 }; - -/* Run Mode Frequency to Turbo Mode Frequency Multiplier (N) */ -/* Note: we store the value N * 2 here. */ -static unsigned char N2_clk_mult[8] = { 0, 0, 2, 3, 4, 0, 6, 0 }; - -/* Crystal clock */ -#define BASE_CLK 3686400 - -/* - * Get the clock frequency as reflected by CCCR and the turbo flag. - * We assume these values have been applied via a fcs. - * If info is not 0 we also display the current settings. - */ -unsigned int pxa25x_get_clk_frequency_khz(int info) -{ - unsigned long cccr, turbo; - unsigned int l, L, m, M, n2, N; - - cccr = CCCR; - asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (turbo) ); - - l = L_clk_mult[(cccr >> 0) & 0x1f]; - m = M_clk_mult[(cccr >> 5) & 0x03]; - n2 = N2_clk_mult[(cccr >> 7) & 0x07]; - - L = l * BASE_CLK; - M = m * L; - N = n2 * M / 2; - - if(info) - { - L += 5000; - printk( KERN_INFO "Memory clock: %d.%02dMHz (*%d)\n", - L / 1000000, (L % 1000000) / 10000, l ); - M += 5000; - printk( KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n", - M / 1000000, (M % 1000000) / 10000, m ); - N += 5000; - printk( KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n", - N / 1000000, (N % 1000000) / 10000, n2 / 2, (n2 % 2) * 5, - (turbo & 1) ? "" : "in" ); - } - - return (turbo & 1) ? (N/1000) : (M/1000); -} - -static unsigned long clk_pxa25x_mem_getrate(struct clk *clk) -{ - return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK; -} - -static const struct clkops clk_pxa25x_mem_ops = { - .enable = clk_dummy_enable, - .disable = clk_dummy_disable, - .getrate = clk_pxa25x_mem_getrate, -}; - -static const struct clkops clk_pxa25x_lcd_ops = { - .enable = clk_pxa2xx_cken_enable, - .disable = clk_pxa2xx_cken_disable, - .getrate = clk_pxa25x_mem_getrate, -}; - -static unsigned long gpio12_config_32k[] = { - GPIO12_32KHz, -}; - -static unsigned long gpio12_config_gpio[] = { - GPIO12_GPIO, -}; - -static void clk_gpio12_enable(struct clk *clk) -{ - pxa2xx_mfp_config(gpio12_config_32k, 1); -} - -static void clk_gpio12_disable(struct clk *clk) -{ - pxa2xx_mfp_config(gpio12_config_gpio, 1); -} - -static const struct clkops clk_pxa25x_gpio12_ops = { - .enable = clk_gpio12_enable, - .disable = clk_gpio12_disable, -}; - -static unsigned long gpio11_config_3m6[] = { - GPIO11_3_6MHz, -}; - -static unsigned long gpio11_config_gpio[] = { - GPIO11_GPIO, -}; - -static void clk_gpio11_enable(struct clk *clk) -{ - pxa2xx_mfp_config(gpio11_config_3m6, 1); -} - -static void clk_gpio11_disable(struct clk *clk) -{ - pxa2xx_mfp_config(gpio11_config_gpio, 1); -} - -static const struct clkops clk_pxa25x_gpio11_ops = { - .enable = clk_gpio11_enable, - .disable = clk_gpio11_disable, -}; - -/* - * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz) - * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz - * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly) - */ - -/* - * PXA 2xx clock declarations. - */ -static DEFINE_PXA2_CKEN(pxa25x_hwuart, HWUART, 14745600, 1); -static DEFINE_PXA2_CKEN(pxa25x_ffuart, FFUART, 14745600, 1); -static DEFINE_PXA2_CKEN(pxa25x_btuart, BTUART, 14745600, 1); -static DEFINE_PXA2_CKEN(pxa25x_stuart, STUART, 14745600, 1); -static DEFINE_PXA2_CKEN(pxa25x_usb, USB, 47923000, 5); -static DEFINE_PXA2_CKEN(pxa25x_mmc, MMC, 19169000, 0); -static DEFINE_PXA2_CKEN(pxa25x_i2c, I2C, 31949000, 0); -static DEFINE_PXA2_CKEN(pxa25x_ssp, SSP, 3686400, 0); -static DEFINE_PXA2_CKEN(pxa25x_nssp, NSSP, 3686400, 0); -static DEFINE_PXA2_CKEN(pxa25x_assp, ASSP, 3686400, 0); -static DEFINE_PXA2_CKEN(pxa25x_pwm0, PWM0, 3686400, 0); -static DEFINE_PXA2_CKEN(pxa25x_pwm1, PWM1, 3686400, 0); -static DEFINE_PXA2_CKEN(pxa25x_ac97, AC97, 24576000, 0); -static DEFINE_PXA2_CKEN(pxa25x_i2s, I2S, 14745600, 0); -static DEFINE_PXA2_CKEN(pxa25x_ficp, FICP, 47923000, 0); - -static DEFINE_CK(pxa25x_lcd, LCD, &clk_pxa25x_lcd_ops); -static DEFINE_CLK(pxa25x_gpio11, &clk_pxa25x_gpio11_ops, 3686400, 0); -static DEFINE_CLK(pxa25x_gpio12, &clk_pxa25x_gpio12_ops, 32768, 0); -static DEFINE_CLK(pxa25x_mem, &clk_pxa25x_mem_ops, 0, 0); - -static struct clk_lookup pxa25x_clkregs[] = { - INIT_CLKREG(&clk_pxa25x_lcd, "pxa2xx-fb", NULL), - INIT_CLKREG(&clk_pxa25x_ffuart, "pxa2xx-uart.0", NULL), - INIT_CLKREG(&clk_pxa25x_btuart, "pxa2xx-uart.1", NULL), - INIT_CLKREG(&clk_pxa25x_stuart, "pxa2xx-uart.2", NULL), - INIT_CLKREG(&clk_pxa25x_usb, "pxa25x-udc", NULL), - INIT_CLKREG(&clk_pxa25x_mmc, "pxa2xx-mci.0", NULL), - INIT_CLKREG(&clk_pxa25x_i2c, "pxa2xx-i2c.0", NULL), - INIT_CLKREG(&clk_pxa25x_ssp, "pxa25x-ssp.0", NULL), - INIT_CLKREG(&clk_pxa25x_nssp, "pxa25x-nssp.1", NULL), - INIT_CLKREG(&clk_pxa25x_assp, "pxa25x-nssp.2", NULL), - INIT_CLKREG(&clk_pxa25x_pwm0, "pxa25x-pwm.0", NULL), - INIT_CLKREG(&clk_pxa25x_pwm1, "pxa25x-pwm.1", NULL), - INIT_CLKREG(&clk_pxa25x_i2s, "pxa2xx-i2s", NULL), - INIT_CLKREG(&clk_pxa25x_stuart, "pxa2xx-ir", "UARTCLK"), - INIT_CLKREG(&clk_pxa25x_ficp, "pxa2xx-ir", "FICPCLK"), - INIT_CLKREG(&clk_pxa25x_ac97, NULL, "AC97CLK"), - INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"), - INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"), - INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL), -#ifdef CONFIG_CPU_PXA26x - INIT_CLKREG(&clk_dummy, "pxa26x-gpio", NULL), -#else - INIT_CLKREG(&clk_dummy, "pxa25x-gpio", NULL), -#endif - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), -}; - -static struct clk_lookup pxa25x_hwuart_clkreg = - INIT_CLKREG(&clk_pxa25x_hwuart, "pxa2xx-uart.3", NULL); - #ifdef CONFIG_PM #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x @@ -374,8 +199,6 @@ static int __init pxa25x_init(void) reset_status = RCSR; - clkdev_add_table(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs)); - if ((ret = pxa_init_dma(IRQ_DMA, 16))) return ret; @@ -383,7 +206,6 @@ static int __init pxa25x_init(void) register_syscore_ops(&pxa_irq_syscore_ops); register_syscore_ops(&pxa2xx_mfp_syscore_ops); - register_syscore_ops(&pxa2xx_clock_syscore_ops); pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info); ret = platform_add_devices(pxa25x_devices, @@ -392,10 +214,6 @@ static int __init pxa25x_init(void) return ret; } - /* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */ - if (cpu_is_pxa255()) - clkdev_add(&pxa25x_hwuart_clkreg); - return ret; } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index a40f2ac80199..b5abdeb5bb2d 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -37,7 +37,8 @@ #include "generic.h" #include "devices.h" -#include "clock.h" +#include <linux/clk-provider.h> +#include <linux/clkdev.h> void pxa27x_clear_otgph(void) { @@ -73,174 +74,6 @@ void pxa27x_configure_ac97reset(int reset_gpio, bool to_gpio) } EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset); -/* Crystal clock: 13MHz */ -#define BASE_CLK 13000000 - -/* - * Get the clock frequency as reflected by CCSR and the turbo flag. - * We assume these values have been applied via a fcs. - * If info is not 0 we also display the current settings. - */ -unsigned int pxa27x_get_clk_frequency_khz(int info) -{ - unsigned long ccsr, clkcfg; - unsigned int l, L, m, M, n2, N, S; - int cccr_a, t, ht, b; - - ccsr = CCSR; - cccr_a = CCCR & (1 << 25); - - /* Read clkcfg register: it has turbo, b, half-turbo (and f) */ - asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) ); - t = clkcfg & (1 << 0); - ht = clkcfg & (1 << 2); - b = clkcfg & (1 << 3); - - l = ccsr & 0x1f; - n2 = (ccsr>>7) & 0xf; - m = (l <= 10) ? 1 : (l <= 20) ? 2 : 4; - - L = l * BASE_CLK; - N = (L * n2) / 2; - M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2)); - S = (b) ? L : (L/2); - - if (info) { - printk( KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n", - L / 1000000, (L % 1000000) / 10000, l ); - printk( KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n", - N / 1000000, (N % 1000000)/10000, n2 / 2, (n2 % 2)*5, - (t) ? "" : "in" ); - printk( KERN_INFO "Memory clock: %d.%02dMHz (/%d)\n", - M / 1000000, (M % 1000000) / 10000, m ); - printk( KERN_INFO "System bus clock: %d.%02dMHz \n", - S / 1000000, (S % 1000000) / 10000 ); - } - - return (t) ? (N/1000) : (L/1000); -} - -/* - * Return the current mem clock frequency as reflected by CCCR[A], B, and L - */ -static unsigned long clk_pxa27x_mem_getrate(struct clk *clk) -{ - unsigned long ccsr, clkcfg; - unsigned int l, L, m, M; - int cccr_a, b; - - ccsr = CCSR; - cccr_a = CCCR & (1 << 25); - - /* Read clkcfg register: it has turbo, b, half-turbo (and f) */ - asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) ); - b = clkcfg & (1 << 3); - - l = ccsr & 0x1f; - m = (l <= 10) ? 1 : (l <= 20) ? 2 : 4; - - L = l * BASE_CLK; - M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2)); - - return M; -} - -static const struct clkops clk_pxa27x_mem_ops = { - .enable = clk_dummy_enable, - .disable = clk_dummy_disable, - .getrate = clk_pxa27x_mem_getrate, -}; - -/* - * Return the current LCD clock frequency in units of 10kHz as - */ -static unsigned int pxa27x_get_lcdclk_frequency_10khz(void) -{ - unsigned long ccsr; - unsigned int l, L, k, K; - - ccsr = CCSR; - - l = ccsr & 0x1f; - k = (l <= 7) ? 1 : (l <= 16) ? 2 : 4; - - L = l * BASE_CLK; - K = L / k; - - return (K / 10000); -} - -static unsigned long clk_pxa27x_lcd_getrate(struct clk *clk) -{ - return pxa27x_get_lcdclk_frequency_10khz() * 10000; -} - -static const struct clkops clk_pxa27x_lcd_ops = { - .enable = clk_pxa2xx_cken_enable, - .disable = clk_pxa2xx_cken_disable, - .getrate = clk_pxa27x_lcd_getrate, -}; - -static DEFINE_PXA2_CKEN(pxa27x_ffuart, FFUART, 14857000, 1); -static DEFINE_PXA2_CKEN(pxa27x_btuart, BTUART, 14857000, 1); -static DEFINE_PXA2_CKEN(pxa27x_stuart, STUART, 14857000, 1); -static DEFINE_PXA2_CKEN(pxa27x_i2s, I2S, 14682000, 0); -static DEFINE_PXA2_CKEN(pxa27x_i2c, I2C, 32842000, 0); -static DEFINE_PXA2_CKEN(pxa27x_usb, USB, 48000000, 5); -static DEFINE_PXA2_CKEN(pxa27x_mmc, MMC, 19500000, 0); -static DEFINE_PXA2_CKEN(pxa27x_ficp, FICP, 48000000, 0); -static DEFINE_PXA2_CKEN(pxa27x_usbhost, USBHOST, 48000000, 0); -static DEFINE_PXA2_CKEN(pxa27x_pwri2c, PWRI2C, 13000000, 0); -static DEFINE_PXA2_CKEN(pxa27x_keypad, KEYPAD, 32768, 0); -static DEFINE_PXA2_CKEN(pxa27x_ssp1, SSP1, 13000000, 0); -static DEFINE_PXA2_CKEN(pxa27x_ssp2, SSP2, 13000000, 0); -static DEFINE_PXA2_CKEN(pxa27x_ssp3, SSP3, 13000000, 0); -static DEFINE_PXA2_CKEN(pxa27x_pwm0, PWM0, 13000000, 0); -static DEFINE_PXA2_CKEN(pxa27x_pwm1, PWM1, 13000000, 0); -static DEFINE_PXA2_CKEN(pxa27x_ac97, AC97, 24576000, 0); -static DEFINE_PXA2_CKEN(pxa27x_ac97conf, AC97CONF, 24576000, 0); -static DEFINE_PXA2_CKEN(pxa27x_msl, MSL, 48000000, 0); -static DEFINE_PXA2_CKEN(pxa27x_usim, USIM, 48000000, 0); -static DEFINE_PXA2_CKEN(pxa27x_memstk, MEMSTK, 19500000, 0); -static DEFINE_PXA2_CKEN(pxa27x_im, IM, 0, 0); -static DEFINE_PXA2_CKEN(pxa27x_memc, MEMC, 0, 0); - -static DEFINE_CK(pxa27x_lcd, LCD, &clk_pxa27x_lcd_ops); -static DEFINE_CK(pxa27x_camera, CAMERA, &clk_pxa27x_lcd_ops); -static DEFINE_CLK(pxa27x_mem, &clk_pxa27x_mem_ops, 0, 0); - -static struct clk_lookup pxa27x_clkregs[] = { - INIT_CLKREG(&clk_pxa27x_lcd, "pxa2xx-fb", NULL), - INIT_CLKREG(&clk_pxa27x_camera, "pxa27x-camera.0", NULL), - INIT_CLKREG(&clk_pxa27x_ffuart, "pxa2xx-uart.0", NULL), - INIT_CLKREG(&clk_pxa27x_btuart, "pxa2xx-uart.1", NULL), - INIT_CLKREG(&clk_pxa27x_stuart, "pxa2xx-uart.2", NULL), - INIT_CLKREG(&clk_pxa27x_i2s, "pxa2xx-i2s", NULL), - INIT_CLKREG(&clk_pxa27x_i2c, "pxa2xx-i2c.0", NULL), - INIT_CLKREG(&clk_pxa27x_usb, "pxa27x-udc", NULL), - INIT_CLKREG(&clk_pxa27x_mmc, "pxa2xx-mci.0", NULL), - INIT_CLKREG(&clk_pxa27x_stuart, "pxa2xx-ir", "UARTCLK"), - INIT_CLKREG(&clk_pxa27x_ficp, "pxa2xx-ir", "FICPCLK"), - INIT_CLKREG(&clk_pxa27x_usbhost, "pxa27x-ohci", NULL), - INIT_CLKREG(&clk_pxa27x_pwri2c, "pxa2xx-i2c.1", NULL), - INIT_CLKREG(&clk_pxa27x_keypad, "pxa27x-keypad", NULL), - INIT_CLKREG(&clk_pxa27x_ssp1, "pxa27x-ssp.0", NULL), - INIT_CLKREG(&clk_pxa27x_ssp2, "pxa27x-ssp.1", NULL), - INIT_CLKREG(&clk_pxa27x_ssp3, "pxa27x-ssp.2", NULL), - INIT_CLKREG(&clk_pxa27x_pwm0, "pxa27x-pwm.0", NULL), - INIT_CLKREG(&clk_pxa27x_pwm1, "pxa27x-pwm.1", NULL), - INIT_CLKREG(&clk_pxa27x_ac97, NULL, "AC97CLK"), - INIT_CLKREG(&clk_pxa27x_ac97conf, NULL, "AC97CONFCLK"), - INIT_CLKREG(&clk_pxa27x_msl, NULL, "MSLCLK"), - INIT_CLKREG(&clk_pxa27x_usim, NULL, "USIMCLK"), - INIT_CLKREG(&clk_pxa27x_memstk, NULL, "MSTKCLK"), - INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"), - INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"), - INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL), - INIT_CLKREG(&clk_dummy, "pxa27x-gpio", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), -}; - #ifdef CONFIG_PM #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x @@ -466,8 +299,6 @@ static int __init pxa27x_init(void) reset_status = RCSR; - clkdev_add_table(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs)); - if ((ret = pxa_init_dma(IRQ_DMA, 32))) return ret; @@ -475,7 +306,6 @@ static int __init pxa27x_init(void) register_syscore_ops(&pxa_irq_syscore_ops); register_syscore_ops(&pxa2xx_mfp_syscore_ops); - register_syscore_ops(&pxa2xx_clock_syscore_ops); if (!of_have_populated_dt()) { pxa_register_device(&pxa27x_device_gpio, |