diff options
Diffstat (limited to 'arch/arm/mach-pxa')
| -rw-r--r-- | arch/arm/mach-pxa/Kconfig | 9 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/corgi_lcd.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/lubbock.c | 80 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/mainstone.c | 90 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/pm.c | 16 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/tosa.c | 162 |
7 files changed, 351 insertions, 8 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 3e5f69bb5ac4..b380a438e68f 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -27,7 +27,8 @@ config PXA_SHARPSL Say Y here if you intend to run this kernel on a Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), - SL-C3000 (Spitz) or SL-C3100 (Borzoi) handheld computer. + SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) + handheld computer. endchoice @@ -37,7 +38,7 @@ choice prompt "Select target Sharp Zaurus device range" config PXA_SHARPSL_25x - bool "Sharp PXA25x models (SL-5600 and SL-C7xx)" + bool "Sharp PXA25x models (SL-5600, SL-C7xx and SL-C6000x)" select PXA25x config PXA_SHARPSL_27x @@ -80,6 +81,10 @@ config MACH_BORZOI depends PXA_SHARPSL_27x select PXA_SHARP_Cxx00 +config MACH_TOSA + bool "Enable Sharp SL-6000x (Tosa) Support" + depends PXA_SHARPSL + config PXA25x bool help diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index f609a0f232cb..8bc72d07cea8 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o ssp.o obj-$(CONFIG_MACH_POODLE) += poodle.o +obj-$(CONFIG_MACH_TOSA) += tosa.o # Support for blinky lights led-y := leds.o diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index 54162ba95414..698eb06545c4 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/module.h> +#include <linux/string.h> #include <asm/arch/akita.h> #include <asm/arch/corgi.h> #include <asm/arch/hardware.h> diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 9c6e77faec5b..b464bc88ff93 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -19,16 +19,20 @@ #include <linux/major.h> #include <linux/fb.h> #include <linux/interrupt.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> #include <asm/hardware.h> #include <asm/irq.h> +#include <asm/sizes.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> +#include <asm/mach/flash.h> #include <asm/hardware/sa1111.h> @@ -199,10 +203,75 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; +static struct resource flash_resources[] = { + [0] = { + .start = 0x00000000, + .end = SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x04000000, + .end = 0x04000000 + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct mtd_partition lubbock_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE /* force read-only */ + },{ + .name = "Kernel", + .size = 0x00100000, + .offset = 0x00040000, + },{ + .name = "Filesystem", + .size = MTDPART_SIZ_FULL, + .offset = 0x00140000 + } +}; + +static struct flash_platform_data lubbock_flash_data[2] = { + { + .map_name = "cfi_probe", + .parts = lubbock_partitions, + .nr_parts = ARRAY_SIZE(lubbock_partitions), + }, { + .map_name = "cfi_probe", + .parts = NULL, + .nr_parts = 0, + } +}; + +static struct platform_device lubbock_flash_device[2] = { + { + .name = "pxa2xx-flash", + .id = 0, + .dev = { + .platform_data = &lubbock_flash_data[0], + }, + .resource = &flash_resources[0], + .num_resources = 1, + }, + { + .name = "pxa2xx-flash", + .id = 1, + .dev = { + .platform_data = &lubbock_flash_data[1], + }, + .resource = &flash_resources[1], + .num_resources = 1, + }, +}; + static struct platform_device *devices[] __initdata = { &sa1111_device, &lub_audio_device, &smc91x_device, + &lubbock_flash_device[0], + &lubbock_flash_device[1], }; static struct pxafb_mach_info sharp_lm8v31 __initdata = { @@ -315,10 +384,21 @@ static struct pxaficp_platform_data lubbock_ficp_platform_data = { static void __init lubbock_init(void) { + int flashboot = (LUB_CONF_SWITCHES & 1); + pxa_set_udc_info(&udc_info); set_pxa_fb_info(&sharp_lm8v31); pxa_set_mci_info(&lubbock_mci_platform_data); pxa_set_ficp_info(&lubbock_ficp_platform_data); + + lubbock_flash_data[0].width = lubbock_flash_data[1].width = + (BOOT_DEF & 1) ? 2 : 4; + /* Compensate for the nROMBT switch which swaps the flash banks */ + printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n", + flashboot?"Flash":"ROM", flashboot); + + lubbock_flash_data[flashboot^1].name = "application-flash"; + lubbock_flash_data[flashboot].name = "boot-rom"; (void) platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 887a8cb7b721..07892f4012d8 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -20,6 +20,9 @@ #include <linux/sched.h> #include <linux/bitops.h> #include <linux/fb.h> +#include <linux/ioport.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> #include <asm/types.h> #include <asm/setup.h> @@ -27,10 +30,12 @@ #include <asm/mach-types.h> #include <asm/hardware.h> #include <asm/irq.h> +#include <asm/sizes.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> +#include <asm/mach/flash.h> #include <asm/arch/pxa-regs.h> #include <asm/arch/mainstone.h> @@ -190,6 +195,69 @@ static struct platform_device mst_audio_device = { .dev = { .platform_data = &mst_audio_ops }, }; +static struct resource flash_resources[] = { + [0] = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PXA_CS1_PHYS, + .end = PXA_CS1_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct mtd_partition mainstoneflash0_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE /* force read-only */ + },{ + .name = "Kernel", + .size = 0x00400000, + .offset = 0x00040000, + },{ + .name = "Filesystem", + .size = MTDPART_SIZ_FULL, + .offset = 0x00440000 + } +}; + +static struct flash_platform_data mst_flash_data[2] = { + { + .map_name = "cfi_probe", + .parts = mainstoneflash0_partitions, + .nr_parts = ARRAY_SIZE(mainstoneflash0_partitions), + }, { + .map_name = "cfi_probe", + .parts = NULL, + .nr_parts = 0, + } +}; + +static struct platform_device mst_flash_device[2] = { + { + .name = "pxa2xx-flash", + .id = 0, + .dev = { + .platform_data = &mst_flash_data[0], + }, + .resource = &flash_resources[0], + .num_resources = 1, + }, + { + .name = "pxa2xx-flash", + .id = 1, + .dev = { + .platform_data = &mst_flash_data[1], + }, + .resource = &flash_resources[1], + .num_resources = 1, + }, +}; + static void mainstone_backlight_power(int on) { if (on) { @@ -318,16 +386,34 @@ static struct pxaficp_platform_data mainstone_ficp_platform_data = { .transceiver_mode = mainstone_irda_transceiver_mode, }; +static struct platform_device *platform_devices[] __initdata = { + &smc91x_device, + &mst_audio_device, + &mst_flash_device[0], + &mst_flash_device[1], +}; + static void __init mainstone_init(void) { + int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */ + + mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4; + mst_flash_data[1].width = 4; + + /* Compensate for SW7 which swaps the flash banks */ + mst_flash_data[SW7].name = "processor-flash"; + mst_flash_data[SW7 ^ 1].name = "mainboard-flash"; + + printk(KERN_NOTICE "Mainstone configured to boot from %s\n", + mst_flash_data[0].name); + /* * On Mainstone, we route AC97_SYSCLK via GPIO45 to * the audio daughter card */ pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD); - platform_device_register(&smc91x_device); - platform_device_register(&mst_audio_device); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); /* reading Mainstone's "Virtual Configuration Register" might be handy to select LCD type here */ diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index ac4dd4336160..f74b9af112dc 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -12,6 +12,7 @@ */ #include <linux/config.h> #include <linux/init.h> +#include <linux/module.h> #include <linux/suspend.h> #include <linux/errno.h> #include <linux/time.h> @@ -19,6 +20,7 @@ #include <asm/hardware.h> #include <asm/memory.h> #include <asm/system.h> +#include <asm/arch/pm.h> #include <asm/arch/pxa-regs.h> #include <asm/arch/lubbock.h> #include <asm/mach/time.h> @@ -72,7 +74,7 @@ enum { SLEEP_SAVE_START = 0, }; -static int pxa_pm_enter(suspend_state_t state) +int pxa_pm_enter(suspend_state_t state) { unsigned long sleep_save[SLEEP_SAVE_SIZE]; unsigned long checksum = 0; @@ -191,6 +193,8 @@ static int pxa_pm_enter(suspend_state_t state) return 0; } +EXPORT_SYMBOL_GPL(pxa_pm_enter); + unsigned long sleep_phys_sp(void *sp) { return virt_to_phys(sp); @@ -199,21 +203,25 @@ unsigned long sleep_phys_sp(void *sp) /* * Called after processes are frozen, but before we shut down devices. */ -static int pxa_pm_prepare(suspend_state_t state) +int pxa_pm_prepare(suspend_state_t state) { extern int pxa_cpu_pm_prepare(suspend_state_t state); return pxa_cpu_pm_prepare(state); } +EXPORT_SYMBOL_GPL(pxa_pm_prepare); + /* * Called after devices are re-setup, but before processes are thawed. */ -static int pxa_pm_finish(suspend_state_t state) +int pxa_pm_finish(suspend_state_t state) { return 0; } +EXPORT_SYMBOL_GPL(pxa_pm_finish); + /* * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk. */ @@ -230,4 +238,4 @@ static int __init pxa_pm_init(void) return 0; } -late_initcall(pxa_pm_init); +device_initcall(pxa_pm_init); diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c new file mode 100644 index 000000000000..400609f8b6a8 --- /dev/null +++ b/arch/arm/mach-pxa/tosa.c @@ -0,0 +1,162 @@ +/* + * Support for Sharp SL-C6000x PDAs + * Model: (Tosa) + * + * Copyright (c) 2005 Dirk Opfer + * + * Based on code written by Sharp/Lineo for 2.4 kernels + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/major.h> +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <linux/mmc/host.h> + +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/arch/irda.h> +#include <asm/arch/mmc.h> +#include <asm/arch/udc.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/pxa-regs.h> +#include <asm/arch/irq.h> +#include <asm/arch/tosa.h> + +#include <asm/hardware/scoop.h> +#include <asm/mach/sharpsl_param.h> + +#include "generic.h" + + +/* + * SCOOP Device + */ +static struct resource tosa_scoop_resources[] = { + [0] = { + .start = TOSA_CF_PHYS, + .end = TOSA_CF_PHYS + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct scoop_config tosa_scoop_setup = { + .io_dir = TOSA_SCOOP_IO_DIR, + .io_out = TOSA_SCOOP_IO_OUT, + +}; + +struct platform_device tosascoop_device = { + .name = "sharp-scoop", + .id = 0, + .dev = { + .platform_data = &tosa_scoop_setup, + }, + .num_resources = ARRAY_SIZE(tosa_scoop_resources), + .resource = tosa_scoop_resources, +}; + + +/* + * SCOOP Device Jacket + */ +static struct resource tosa_scoop_jc_resources[] = { + [0] = { + .start = TOSA_SCOOP_PHYS + 0x40, + .end = TOSA_SCOOP_PHYS + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct scoop_config tosa_scoop_jc_setup = { + .io_dir = TOSA_SCOOP_JC_IO_DIR, + .io_out = TOSA_SCOOP_JC_IO_OUT, +}; + +struct platform_device tosascoop_jc_device = { + .name = "sharp-scoop", + .id = 1, + .dev = { + .platform_data = &tosa_scoop_jc_setup, + .parent = &tosascoop_device.dev, + }, + .num_resources = ARRAY_SIZE(tosa_scoop_jc_resources), + .resource = tosa_scoop_jc_resources, +}; + +static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = { +{ + .dev = &tosascoop_device.dev, + .irq = TOSA_IRQ_GPIO_CF_IRQ, + .cd_irq = TOSA_IRQ_GPIO_CF_CD, + .cd_irq_str = "PCMCIA0 CD", +},{ + .dev = &tosascoop_jc_device.dev, + .irq = TOSA_IRQ_GPIO_JC_CF_IRQ, + .cd_irq = -1, +}, +}; + + +static struct platform_device *devices[] __initdata = { + &tosascoop_device, + &tosascoop_jc_device, +}; + +static void __init tosa_init(void) +{ + pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN); + pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN); + + /* setup sleep mode values */ + PWER = 0x00000002; + PFER = 0x00000000; + PRER = 0x00000002; + PGSR0 = 0x00000000; + PGSR1 = 0x00FF0002; + PGSR2 = 0x00014000; + PCFR |= PCFR_OPDE; + + // enable batt_fault + PMCR = 0x01; + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + scoop_num = 2; + scoop_devs = &tosa_pcmcia_scoop[0]; +} + +static void __init fixup_tosa(struct machine_desc *desc, + struct tag *tags, char **cmdline, struct meminfo *mi) +{ + sharpsl_save_param(); + mi->nr_banks=1; + mi->bank[0].start = 0xa0000000; + mi->bank[0].node = 0; + mi->bank[0].size = (64*1024*1024); +} + +MACHINE_START(TOSA, "SHARP Tosa") + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = fixup_tosa, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, + .init_machine = tosa_init, + .timer = &pxa_timer, +MACHINE_END |