summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa')
-rw-r--r--arch/arm/mach-pxa/Kconfig4
-rw-r--r--arch/arm/mach-pxa/Makefile1
-rw-r--r--arch/arm/mach-pxa/clock.c15
-rw-r--r--arch/arm/mach-pxa/corgi.c7
-rw-r--r--arch/arm/mach-pxa/devices.h11
-rw-r--r--arch/arm/mach-pxa/dma.c44
-rw-r--r--arch/arm/mach-pxa/em-x270.c354
-rw-r--r--arch/arm/mach-pxa/generic.c101
-rw-r--r--arch/arm/mach-pxa/generic.h6
-rw-r--r--arch/arm/mach-pxa/idp.c3
-rw-r--r--arch/arm/mach-pxa/irq.c106
-rw-r--r--arch/arm/mach-pxa/lpd270.c3
-rw-r--r--arch/arm/mach-pxa/lubbock.c3
-rw-r--r--arch/arm/mach-pxa/mainstone.c3
-rw-r--r--arch/arm/mach-pxa/pm.c184
-rw-r--r--arch/arm/mach-pxa/poodle.c3
-rw-r--r--arch/arm/mach-pxa/pxa25x.c137
-rw-r--r--arch/arm/mach-pxa/pxa27x.c183
-rw-r--r--arch/arm/mach-pxa/sleep.S112
-rw-r--r--arch/arm/mach-pxa/spitz.c7
-rw-r--r--arch/arm/mach-pxa/time.c263
-rw-r--r--arch/arm/mach-pxa/tosa.c4
-rw-r--r--arch/arm/mach-pxa/trizeps4.c3
23 files changed, 1025 insertions, 532 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 5c0a10041cd1..5ebec6d88b51 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -37,6 +37,10 @@ config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
select PXA27x
+config MACH_EM_X270
+ bool "CompuLab EM-x270 platform"
+ select PXA27x
+
endchoice
if PXA_SHARPSL
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 9093eb1c94eb..7d6ab5c59ab9 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o sp
obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o
obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
+obj-$(CONFIG_MACH_EM_X270) += em-x270.o
# Support for blinky lights
led-y := leds.o
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index 8f7c90a0593b..34a31caa6f9d 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -12,7 +12,6 @@
#include <asm/arch/pxa-regs.h>
#include <asm/hardware.h>
-#include <asm/semaphore.h>
struct clk {
struct list_head node;
@@ -25,21 +24,21 @@ struct clk {
};
static LIST_HEAD(clocks);
-static DECLARE_MUTEX(clocks_sem);
+static DEFINE_MUTEX(clocks_mutex);
static DEFINE_SPINLOCK(clocks_lock);
struct clk *clk_get(struct device *dev, const char *id)
{
struct clk *p, *clk = ERR_PTR(-ENOENT);
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_for_each_entry(p, &clocks, node) {
if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
break;
}
}
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
return clk;
}
@@ -101,18 +100,18 @@ static struct clk clk_gpio27 = {
int clk_register(struct clk *clk)
{
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_add(&clk->node, &clocks);
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
return 0;
}
EXPORT_SYMBOL(clk_register);
void clk_unregister(struct clk *clk)
{
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_del(&clk->node);
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
}
EXPORT_SYMBOL(clk_unregister);
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index a1a900d16665..aab27297b3c6 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -44,6 +44,7 @@
#include <asm/hardware/scoop.h>
#include "generic.h"
+#include "devices.h"
#include "sharpsl.h"
@@ -368,7 +369,7 @@ MACHINE_START(CORGI, "SHARP Corgi")
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_corgi,
.map_io = pxa_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
@@ -380,7 +381,7 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd")
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_corgi,
.map_io = pxa_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
@@ -392,7 +393,7 @@ MACHINE_START(HUSKY, "SHARP Husky")
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_corgi,
.map_io = pxa_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
new file mode 100644
index 000000000000..636fdb1c049c
--- /dev/null
+++ b/arch/arm/mach-pxa/devices.h
@@ -0,0 +1,11 @@
+extern struct platform_device pxa_device_mci;
+extern struct platform_device pxa_device_udc;
+extern struct platform_device pxa_device_fb;
+extern struct platform_device pxa_device_ffuart;
+extern struct platform_device pxa_device_btuart;
+extern struct platform_device pxa_device_stuart;
+extern struct platform_device pxa_device_hwuart;
+extern struct platform_device pxa_device_i2c;
+extern struct platform_device pxa_device_i2s;
+extern struct platform_device pxa_device_ficp;
+extern struct platform_device pxa_device_rtc;
diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c
index 4440babe7b97..93c4f31f127f 100644
--- a/arch/arm/mach-pxa/dma.c
+++ b/arch/arm/mach-pxa/dma.c
@@ -25,12 +25,15 @@
#include <asm/arch/pxa-regs.h>
-static struct dma_channel {
+struct dma_channel {
char *name;
+ pxa_dma_prio prio;
void (*irq_handler)(int, void *);
void *data;
-} dma_channels[PXA_DMA_CHANNELS];
+};
+static struct dma_channel *dma_channels;
+static int num_dma_channels;
int pxa_request_dma (char *name, pxa_dma_prio prio,
void (*irq_handler)(int, void *),
@@ -47,8 +50,9 @@ int pxa_request_dma (char *name, pxa_dma_prio prio,
do {
/* try grabbing a DMA channel with the requested priority */
- pxa_for_each_dma_prio (i, prio) {
- if (!dma_channels[i].name) {
+ for (i = 0; i < num_dma_channels; i++) {
+ if ((dma_channels[i].prio == prio) &&
+ !dma_channels[i].name) {
found = 1;
break;
}
@@ -91,7 +95,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
{
int i, dint = DINT;
- for (i = 0; i < PXA_DMA_CHANNELS; i++) {
+ for (i = 0; i < num_dma_channels; i++) {
if (dint & (1 << i)) {
struct dma_channel *channel = &dma_channels[i];
if (channel->name && channel->irq_handler) {
@@ -109,18 +113,32 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static int __init pxa_dma_init (void)
+int __init pxa_init_dma(int num_ch)
{
- int ret;
+ int i, ret;
- ret = request_irq (IRQ_DMA, dma_irq_handler, 0, "DMA", NULL);
- if (ret)
+ dma_channels = kzalloc(sizeof(struct dma_channel) * num_ch, GFP_KERNEL);
+ if (dma_channels == NULL)
+ return -ENOMEM;
+
+ ret = request_irq(IRQ_DMA, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
+ if (ret) {
printk (KERN_CRIT "Wow! Can't register IRQ for DMA\n");
- return ret;
-}
+ kfree(dma_channels);
+ return ret;
+ }
-arch_initcall(pxa_dma_init);
+ /* dma channel priorities on pxa2xx processors:
+ * ch 0 - 3, 16 - 19 <--> (0) DMA_PRIO_HIGH
+ * ch 4 - 7, 20 - 23 <--> (1) DMA_PRIO_MEDIUM
+ * ch 8 - 15, 24 - 31 <--> (2) DMA_PRIO_LOW
+ */
+ for (i = 0; i < num_ch; i++)
+ dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
+
+ num_dma_channels = num_ch;
+ return 0;
+}
EXPORT_SYMBOL(pxa_request_dma);
EXPORT_SYMBOL(pxa_free_dma);
-
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
new file mode 100644
index 000000000000..3d0ad5065ee5
--- /dev/null
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -0,0 +1,354 @@
+/*
+ * Support for CompuLab EM-x270 platform
+ *
+ * Copyright (C) 2007 CompuLab, Ltd.
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+
+#include <linux/dm9000.h>
+#include <linux/rtc-v3020.h>
+
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/ohci.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/bitfield.h>
+
+#include "generic.h"
+
+/* GPIO IRQ usage */
+#define EM_X270_MMC_PD (105)
+#define EM_X270_ETHIRQ IRQ_GPIO(41)
+#define EM_X270_MMC_IRQ IRQ_GPIO(13)
+
+static struct resource em_x270_dm9k_resource[] = {
+ [0] = {
+ .start = PXA_CS2_PHYS,
+ .end = PXA_CS2_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_CS2_PHYS + 8,
+ .end = PXA_CS2_PHYS + 8 + 0x3f,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = EM_X270_ETHIRQ,
+ .end = EM_X270_ETHIRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+/* for the moment we limit ourselves to 32bit IO until some
+ * better IO routines can be written and tested
+ */
+static struct dm9000_plat_data em_x270_dm9k_platdata = {
+ .flags = DM9000_PLATF_32BITONLY,
+};
+
+/* Ethernet device */
+static struct platform_device em_x270_dm9k = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(em_x270_dm9k_resource),
+ .resource = em_x270_dm9k_resource,
+ .dev = {
+ .platform_data = &em_x270_dm9k_platdata,
+ }
+};
+
+/* audio device */
+static struct platform_device em_x270_audio = {
+ .name = "pxa2xx-ac97",
+ .id = -1,
+};
+
+/* WM9712 touchscreen controller. Hopefully the driver will make it to
+ * the mainstream sometime */
+static struct platform_device em_x270_ts = {
+ .name = "wm97xx-ts",
+ .id = -1,
+};
+
+/* RTC */
+static struct resource em_x270_v3020_resource[] = {
+ [0] = {
+ .start = PXA_CS4_PHYS,
+ .end = PXA_CS4_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct v3020_platform_data em_x270_v3020_platdata = {
+ .leftshift = 0,
+};
+
+static struct platform_device em_x270_rtc = {
+ .name = "v3020",
+ .num_resources = ARRAY_SIZE(em_x270_v3020_resource),
+ .resource = em_x270_v3020_resource,
+ .id = -1,
+ .dev = {
+ .platform_data = &em_x270_v3020_platdata,
+ }
+};
+
+/* NAND flash */
+#define GPIO_NAND_CS (11)
+#define GPIO_NAND_RB (56)
+
+static inline void nand_cs_on(void)
+{
+ GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+}
+
+static void nand_cs_off(void)
+{
+ dsb();
+
+ GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+}
+
+/* hardware specific access to control-lines */
+static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat,
+ unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
+
+ dsb();
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if (ctrl & NAND_ALE)
+ nandaddr |= (1 << 3);
+ else
+ nandaddr &= ~(1 << 3);
+ if (ctrl & NAND_CLE)
+ nandaddr |= (1 << 2);
+ else
+ nandaddr &= ~(1 << 2);
+ if (ctrl & NAND_NCE)
+ nand_cs_on();
+ else
+ nand_cs_off();
+ }
+
+ dsb();
+ this->IO_ADDR_W = (void __iomem *)nandaddr;
+ if (dat != NAND_CMD_NONE)
+ writel(dat, this->IO_ADDR_W);
+
+ dsb();
+}
+
+/* read device ready pin */
+static int em_x270_nand_device_ready(struct mtd_info *mtd)
+{
+ dsb();
+
+ return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB);
+}
+
+static struct mtd_partition em_x270_partition_info[] = {
+ [0] = {
+ .name = "em_x270-0",
+ .offset = 0,
+ .size = SZ_4M,
+ },
+ [1] = {
+ .name = "em_x270-1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static const char *em_x270_part_probes[] = { "cmdlinepart", NULL };
+
+struct platform_nand_data em_x270_nand_platdata = {
+ .chip = {
+ .nr_chips = 1,
+ .chip_offset = 0,
+ .nr_partitions = ARRAY_SIZE(em_x270_partition_info),
+ .partitions = em_x270_partition_info,
+ .chip_delay = 20,
+ .part_probe_types = em_x270_part_probes,
+ },
+ .ctrl = {
+ .hwcontrol = 0,
+ .dev_ready = em_x270_nand_device_ready,
+ .select_chip = 0,
+ .cmd_ctrl = em_x270_nand_cmd_ctl,
+ },
+};
+
+static struct resource em_x270_nand_resource[] = {
+ [0] = {
+ .start = PXA_CS1_PHYS,
+ .end = PXA_CS1_PHYS + 12,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device em_x270_nand = {
+ .name = "gen_nand",
+ .num_resources = ARRAY_SIZE(em_x270_nand_resource),
+ .resource = em_x270_nand_resource,
+ .id = -1,
+ .dev = {
+ .platform_data = &em_x270_nand_platdata,
+ }
+};
+
+/* platform devices */
+static struct platform_device *platform_devices[] __initdata = {
+ &em_x270_dm9k,
+ &em_x270_audio,
+ &em_x270_ts,
+ &em_x270_rtc,
+ &em_x270_nand,
+};
+
+
+/* PXA27x OHCI controller setup */
+static int em_x270_ohci_init(struct device *dev)
+{
+ /* Set the Power Control Polarity Low */
+ UHCHR = (UHCHR | UHCHR_PCPL) &
+ ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
+
+ /* enable port 2 transiever */
+ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
+
+ return 0;
+}
+
+static struct pxaohci_platform_data em_x270_ohci_platform_data = {
+ .port_mode = PMM_PERPORT_MODE,
+ .init = em_x270_ohci_init,
+};
+
+
+static int em_x270_mci_init(struct device *dev,
+ irq_handler_t em_x270_detect_int,
+ void *data)
+{
+ int err;
+
+ /* setup GPIO for PXA27x MMC controller */
+ pxa_gpio_mode(GPIO32_MMCCLK_MD);
+ pxa_gpio_mode(GPIO112_MMCCMD_MD);
+ pxa_gpio_mode(GPIO92_MMCDAT0_MD);
+ pxa_gpio_mode(GPIO109_MMCDAT1_MD);
+ pxa_gpio_mode(GPIO110_MMCDAT2_MD);
+ pxa_gpio_mode(GPIO111_MMCDAT3_MD);
+
+ /* EM-X270 uses GPIO13 as SD power enable */
+ pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT);
+
+ err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int,
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ "MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
+ __FUNCTION__, err);
+ return err;
+ }
+
+ return 0;
+}
+
+static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
+{
+ /*
+ FIXME: current hardware implementation does not allow to
+ enable/disable MMC power. This will be fixed in next HW releases,
+ and we'll need to add implmentation here.
+ */
+ return;
+}
+
+static void em_x270_mci_exit(struct device *dev, void *data)
+{
+ free_irq(EM_X270_MMC_IRQ, data);
+}
+
+static struct pxamci_platform_data em_x270_mci_platform_data = {
+ .ocr_mask = MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31,
+ .init = em_x270_mci_init,
+ .setpower = em_x270_mci_setpower,
+ .exit = em_x270_mci_exit,
+};
+
+/* LCD 480x640 */
+static struct pxafb_mode_info em_x270_lcd_mode = {
+ .pixclock = 50000,
+ .bpp = 16,
+ .xres = 480,
+ .yres = 640,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .left_margin = 8,
+ .upper_margin = 0,
+ .right_margin = 24,
+ .lower_margin = 4,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info em_x270_lcd = {
+ .modes = &em_x270_lcd_mode,
+ .num_modes = 1,
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+ .lccr0 = LCCR0_PAS,
+ .lccr3 = LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff),
+};
+
+static void __init em_x270_init(void)
+{
+ /* setup LCD */
+ set_pxa_fb_info(&em_x270_lcd);
+
+ /* register EM-X270 platform devices */
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+ /* set MCI and OHCI platform parameters */
+ pxa_set_mci_info(&em_x270_mci_platform_data);
+ pxa_set_ohci_info(&em_x270_ohci_platform_data);
+
+ /* setup STUART GPIOs */
+ pxa_gpio_mode(GPIO46_STRXD_MD);
+ pxa_gpio_mode(GPIO47_STTXD_MD);
+
+ /* setup BTUART GPIOs */
+ pxa_gpio_mode(GPIO42_BTRXD_MD);
+ pxa_gpio_mode(GPIO43_BTTXD_MD);
+ pxa_gpio_mode(GPIO44_BTCTS_MD);
+ pxa_gpio_mode(GPIO45_BTRTS_MD);
+
+ /* Setup interrupt for dm9000 */
+ set_irq_type(EM_X270_ETHIRQ, IRQT_RISING);
+}
+
+MACHINE_START(EM_X270, "Compulab EM-x270")
+ .boot_params = 0xa0000100,
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = em_x270_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 64b08b744f9f..5510f6fdce55 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -43,6 +43,7 @@
#include <asm/arch/irda.h>
#include <asm/arch/i2c.h>
+#include "devices.h"
#include "generic.h"
/*
@@ -242,7 +243,7 @@ static struct resource pxamci_resources[] = {
static u64 pxamci_dmamask = 0xffffffffUL;
-static struct platform_device pxamci_device = {
+struct platform_device pxa_device_mci = {
.name = "pxa2xx-mci",
.id = -1,
.dev = {
@@ -255,7 +256,7 @@ static struct platform_device pxamci_device = {
void __init pxa_set_mci_info(struct pxamci_platform_data *info)
{
- pxamci_device.dev.platform_data = info;
+ pxa_device_mci.dev.platform_data = info;
}
@@ -281,7 +282,7 @@ static struct resource pxa2xx_udc_resources[] = {
static u64 udc_dma_mask = ~(u32)0;
-static struct platform_device udc_device = {
+struct platform_device pxa_device_udc = {
.name = "pxa2xx-udc",
.id = -1,
.resource = pxa2xx_udc_resources,
@@ -307,7 +308,7 @@ static struct resource pxafb_resources[] = {
static u64 fb_dma_mask = ~(u64)0;
-static struct platform_device pxafb_device = {
+struct platform_device pxa_device_fb = {
.name = "pxa2xx-fb",
.id = -1,
.dev = {
@@ -320,32 +321,32 @@ static struct platform_device pxafb_device = {
void __init set_pxa_fb_info(struct pxafb_mach_info *info)
{
- pxafb_device.dev.platform_data = info;
+ pxa_device_fb.dev.platform_data = info;
}
void __init set_pxa_fb_parent(struct device *parent_dev)
{
- pxafb_device.dev.parent = parent_dev;
+ pxa_device_fb.dev.parent = parent_dev;
}
-static struct platform_device ffuart_device = {
+struct platform_device pxa_device_ffuart= {
.name = "pxa2xx-uart",
.id = 0,
};
-static struct platform_device btuart_device = {
+struct platform_device pxa_device_btuart = {
.name = "pxa2xx-uart",
.id = 1,
};
-static struct platform_device stuart_device = {
+struct platform_device pxa_device_stuart = {
.name = "pxa2xx-uart",
.id = 2,
};
-static struct platform_device hwuart_device = {
+struct platform_device pxa_device_hwuart = {
.name = "pxa2xx-uart",
.id = 3,
};
-static struct resource i2c_resources[] = {
+static struct resource pxai2c_resources[] = {
{
.start = 0x40301680,
.end = 0x403016a3,
@@ -357,40 +358,19 @@ static struct resource i2c_resources[] = {
},
};
-static struct platform_device i2c_device = {
+struct platform_device pxa_device_i2c = {
.name = "pxa2xx-i2c",
.id = 0,
- .resource = i2c_resources,
- .num_resources = ARRAY_SIZE(i2c_resources),
+ .resource = pxai2c_resources,
+ .num_resources = ARRAY_SIZE(pxai2c_resources),
};
-#ifdef CONFIG_PXA27x
-static struct resource i2c_power_resources[] = {
- {
- .start = 0x40f00180,
- .end = 0x40f001a3,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PWRI2C,
- .end = IRQ_PWRI2C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device i2c_power_device = {
- .name = "pxa2xx-i2c",
- .id = 1,
- .resource = i2c_power_resources,
- .num_resources = ARRAY_SIZE(i2c_resources),
-};
-#endif
-
void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
{
- i2c_device.dev.platform_data = info;
+ pxa_device_i2c.dev.platform_data = info;
}
-static struct resource i2s_resources[] = {
+static struct resource pxai2s_resources[] = {
{
.start = 0x40400000,
.end = 0x40400083,
@@ -402,16 +382,16 @@ static struct resource i2s_resources[] = {
},
};
-static struct platform_device i2s_device = {
+struct platform_device pxa_device_i2s = {
.name = "pxa2xx-i2s",
.id = -1,
- .resource = i2s_resources,
- .num_resources = ARRAY_SIZE(i2s_resources),
+ .resource = pxai2s_resources,
+ .num_resources = ARRAY_SIZE(pxai2s_resources),
};
static u64 pxaficp_dmamask = ~(u32)0;
-static struct platform_device pxaficp_device = {
+struct platform_device pxa_device_ficp = {
.name = "pxa2xx-ir",
.id = -1,
.dev = {
@@ -422,45 +402,10 @@ static struct platform_device pxaficp_device = {
void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
{
- pxaficp_device.dev.platform_data = info;
+ pxa_device_ficp.dev.platform_data = info;
}
-static struct platform_device pxartc_device = {
+struct platform_device pxa_device_rtc = {
.name = "sa1100-rtc",
.id = -1,
};
-
-static struct platform_device *devices[] __initdata = {
- &pxamci_device,
- &udc_device,
- &pxafb_device,
- &ffuart_device,
- &btuart_device,
- &stuart_device,
- &pxaficp_device,
- &i2c_device,
-#ifdef CONFIG_PXA27x
- &i2c_power_device,
-#endif
- &i2s_device,
- &pxartc_device,
-};
-
-static int __init pxa_init(void)
-{
- int cpuid, ret;
-
- ret = platform_add_devices(devices, ARRAY_SIZE(devices));
- if (ret)
- return ret;
-
- /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
- cpuid = read_cpuid(CPUID_ID);
- if (((cpuid >> 4) & 0xfff) == 0x2d0 ||
- ((cpuid >> 4) & 0xfff) == 0x290)
- ret = platform_device_register(&hwuart_device);
-
- return ret;
-}
-
-subsys_initcall(pxa_init);
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index e54a8dd63c17..91ab2ad8b34b 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -12,8 +12,12 @@
struct sys_timer;
extern struct sys_timer pxa_timer;
+extern void __init pxa_init_irq_low(void);
+extern void __init pxa_init_irq_high(void);
+extern void __init pxa_init_irq_gpio(int gpio_nr);
+extern void __init pxa25x_init_irq(void);
+extern void __init pxa27x_init_irq(void);
extern void __init pxa_map_io(void);
-extern void __init pxa_init_irq(void);
extern unsigned int get_clk_frequency_khz(int info);
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 64df44043a65..465108da2851 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -38,6 +38,7 @@
#include <asm/arch/mmc.h>
#include "generic.h"
+#include "devices.h"
/* TODO:
* - add pxa2xx_audio_ops_t device structure
@@ -152,7 +153,7 @@ static void __init idp_init(void)
static void __init idp_init_irq(void)
{
- pxa_init_irq();
+ pxa25x_init_irq();
set_irq_type(TOUCH_PANEL_IRQ, TOUCH_PANEL_IRQ_EDGE);
}
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 4619d5fe606c..4b867b0789d5 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -30,12 +30,12 @@
static void pxa_mask_low_irq(unsigned int irq)
{
- ICMR &= ~(1 << (irq + PXA_IRQ_SKIP));
+ ICMR &= ~(1 << irq);
}
static void pxa_unmask_low_irq(unsigned int irq)
{
- ICMR |= (1 << (irq + PXA_IRQ_SKIP));
+ ICMR |= (1 << irq);
}
static int pxa_set_wake(unsigned int irq, unsigned int on)
@@ -67,7 +67,27 @@ static struct irq_chip pxa_internal_chip_low = {
.set_wake = pxa_set_wake,
};
-#if PXA_INTERNAL_IRQS > 32
+void __init pxa_init_irq_low(void)
+{
+ int irq;
+
+ /* disable all IRQs */
+ ICMR = 0;
+
+ /* all IRQs are IRQ, not FIQ */
+ ICLR = 0;
+
+ /* only unmasked interrupts kick us out of idle */
+ ICCR = 1;
+
+ for (irq = PXA_IRQ(0); irq <= PXA_IRQ(31); irq++) {
+ set_irq_chip(irq, &pxa_internal_chip_low);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+}
+
+#ifdef CONFIG_PXA27x
/*
* This is for the second set of internal IRQs as found on the PXA27x.
@@ -75,12 +95,12 @@ static struct irq_chip pxa_internal_chip_low = {
static void pxa_mask_high_irq(unsigned int irq)
{
- ICMR2 &= ~(1 << (irq - 32 + PXA_IRQ_SKIP));
+ ICMR2 &= ~(1 << (irq - 32));
}
static void pxa_unmask_high_irq(unsigned int irq)
{
- ICMR2 |= (1 << (irq - 32 + PXA_IRQ_SKIP));
+ ICMR2 |= (1 << (irq - 32));
}
static struct irq_chip pxa_internal_chip_high = {
@@ -90,6 +110,19 @@ static struct irq_chip pxa_internal_chip_high = {
.unmask = pxa_unmask_high_irq,
};
+void __init pxa_init_irq_high(void)
+{
+ int irq;
+
+ ICMR2 = 0;
+ ICLR2 = 0;
+
+ for (irq = PXA_IRQ(32); irq < PXA_IRQ(64); irq++) {
+ set_irq_chip(irq, &pxa_internal_chip_high);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+}
#endif
/* Note that if an input/irq line ever gets changed to an output during
@@ -217,7 +250,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
do {
loop = 0;
- mask = GEDR0 & ~3;
+ mask = GEDR0 & GPIO_IRQ_mask[0] & ~3;
if (mask) {
GEDR0 = mask;
irq = IRQ_GPIO(2);
@@ -233,7 +266,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
loop = 1;
}
- mask = GEDR1;
+ mask = GEDR1 & GPIO_IRQ_mask[1];
if (mask) {
GEDR1 = mask;
irq = IRQ_GPIO(32);
@@ -248,7 +281,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
loop = 1;
}
- mask = GEDR2;
+ mask = GEDR2 & GPIO_IRQ_mask[2];
if (mask) {
GEDR2 = mask;
irq = IRQ_GPIO(64);
@@ -263,8 +296,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
loop = 1;
}
-#if PXA_LAST_GPIO >= 96
- mask = GEDR3;
+ mask = GEDR3 & GPIO_IRQ_mask[3];
if (mask) {
GEDR3 = mask;
irq = IRQ_GPIO(96);
@@ -278,7 +310,6 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
} while (mask);
loop = 1;
}
-#endif
} while (loop);
}
@@ -314,64 +345,27 @@ static struct irq_chip pxa_muxed_gpio_chip = {
.set_wake = pxa_set_gpio_wake,
};
-
-void __init pxa_init_irq(void)
+void __init pxa_init_irq_gpio(int gpio_nr)
{
- int irq;
-
- /* disable all IRQs */
- ICMR = 0;
-
- /* all IRQs are IRQ, not FIQ */
- ICLR = 0;
+ int irq, i;
/* clear all GPIO edge detects */
- GFER0 = 0;
- GFER1 = 0;
- GFER2 = 0;
- GRER0 = 0;
- GRER1 = 0;
- GRER2 = 0;
- GEDR0 = GEDR0;
- GEDR1 = GEDR1;
- GEDR2 = GEDR2;
-
-#ifdef CONFIG_PXA27x
- /* And similarly for the extra regs on the PXA27x */
- ICMR2 = 0;
- ICLR2 = 0;
- GFER3 = 0;
- GRER3 = 0;
- GEDR3 = GEDR3;
-#endif
-
- /* only unmasked interrupts kick us out of idle */
- ICCR = 1;
+ for (i = 0; i < gpio_nr; i += 32) {
+ GFER(i) = 0;
+ GRER(i) = 0;
+ GEDR(i) = GEDR(i);
+ }
/* GPIO 0 and 1 must have their mask bit always set */
GPIO_IRQ_mask[0] = 3;
- for (irq = PXA_IRQ(PXA_IRQ_SKIP); irq <= PXA_IRQ(31); irq++) {
- set_irq_chip(irq, &pxa_internal_chip_low);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
-#if PXA_INTERNAL_IRQS > 32
- for (irq = PXA_IRQ(32); irq < PXA_IRQ(PXA_INTERNAL_IRQS); irq++) {
- set_irq_chip(irq, &pxa_internal_chip_high);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-#endif
-
for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
set_irq_chip(irq, &pxa_low_gpio_chip);
set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
- for (irq = IRQ_GPIO(2); irq <= IRQ_GPIO(PXA_LAST_GPIO); irq++) {
+ for (irq = IRQ_GPIO(2); irq <= IRQ_GPIO(gpio_nr); irq++) {
set_irq_chip(irq, &pxa_muxed_gpio_chip);
set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index e3097664ffe1..26116440a7c9 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -46,6 +46,7 @@
#include <asm/arch/ohci.h>
#include "generic.h"
+#include "devices.h"
static unsigned int lpd270_irq_enabled;
@@ -97,7 +98,7 @@ static void __init lpd270_init_irq(void)
{
int irq;
- pxa_init_irq();
+ pxa27x_init_irq();
__raw_writew(0, LPD270_INT_MASK);
__raw_writew(0, LPD270_INT_STATUS);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 6377b2e29ff0..e70048fd00a5 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -48,6 +48,7 @@
#include <asm/arch/mmc.h>
#include "generic.h"
+#include "devices.h"
#define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
@@ -103,7 +104,7 @@ static void __init lubbock_init_irq(void)
{
int irq;
- pxa_init_irq();
+ pxa25x_init_irq();
/* setup extra lubbock irqs */
for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index ed99a81b98f3..b02c79c7e6a3 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -46,6 +46,7 @@
#include <asm/arch/ohci.h>
#include "generic.h"
+#include "devices.h"
static unsigned long mainstone_irq_enabled;
@@ -89,7 +90,7 @@ static void __init mainstone_init_irq(void)
{
int irq;
- pxa_init_irq();
+ pxa27x_init_irq();
/* setup extra Mainstone irqs */
for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 6bf15ae73848..b59a81a8e7d3 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -24,62 +24,13 @@
#include <asm/arch/lubbock.h>
#include <asm/mach/time.h>
-
-/*
- * Debug macros
- */
-#undef DEBUG
-
-#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
-#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
-
-#define RESTORE_GPLEVEL(n) do { \
- GPSR##n = sleep_save[SLEEP_SAVE_GPLR##n]; \
- GPCR##n = ~sleep_save[SLEEP_SAVE_GPLR##n]; \
-} while (0)
-
-/*
- * List of global PXA peripheral registers to preserve.
- * More ones like CP and general purpose register values are preserved
- * with the stack pointer in sleep.S.
- */
-enum { SLEEP_SAVE_START = 0,
-
- SLEEP_SAVE_GPLR0, SLEEP_SAVE_GPLR1, SLEEP_SAVE_GPLR2, SLEEP_SAVE_GPLR3,
- SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2, SLEEP_SAVE_GPDR3,
- SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2, SLEEP_SAVE_GRER3,
- SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2, SLEEP_SAVE_GFER3,
- SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
-
- SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
- SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
- SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U,
- SLEEP_SAVE_GAFR3_L, SLEEP_SAVE_GAFR3_U,
-
- SLEEP_SAVE_PSTR,
-
- SLEEP_SAVE_ICMR,
- SLEEP_SAVE_CKEN,
-
-#ifdef CONFIG_PXA27x
- SLEEP_SAVE_MDREFR,
- SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
- SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,
-#endif
-
- SLEEP_SAVE_CKSUM,
-
- SLEEP_SAVE_SIZE
-};
-
+struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
+static unsigned long *sleep_save;
int pxa_pm_enter(suspend_state_t state)
{
- unsigned long sleep_save[SLEEP_SAVE_SIZE];
- unsigned long checksum = 0;
- struct timespec delta, rtc;
+ unsigned long sleep_save_checksum = 0, checksum = 0;
int i;
- extern void pxa_cpu_pm_enter(suspend_state_t state);
#ifdef CONFIG_IWMMXT
/* force any iWMMXt context to ram **/
@@ -87,109 +38,35 @@ int pxa_pm_enter(suspend_state_t state)
iwmmxt_task_disable(NULL);
#endif
- /* preserve current time */
- rtc.tv_sec = RCNR;
- rtc.tv_nsec = 0;
- save_time_delta(&delta, &rtc);
-
- SAVE(GPLR0); SAVE(GPLR1); SAVE(GPLR2);
- SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2);
- SAVE(GRER0); SAVE(GRER1); SAVE(GRER2);
- SAVE(GFER0); SAVE(GFER1); SAVE(GFER2);
- SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2);
-
- SAVE(GAFR0_L); SAVE(GAFR0_U);
- SAVE(GAFR1_L); SAVE(GAFR1_U);
- SAVE(GAFR2_L); SAVE(GAFR2_U);
-
-#ifdef CONFIG_PXA27x
- SAVE(MDREFR);
- SAVE(GPLR3); SAVE(GPDR3); SAVE(GRER3); SAVE(GFER3); SAVE(PGSR3);
- SAVE(GAFR3_L); SAVE(GAFR3_U);
- SAVE(PWER); SAVE(PCFR); SAVE(PRER);
- SAVE(PFER); SAVE(PKWR);
-#endif
-
- SAVE(ICMR);
- ICMR = 0;
-
- SAVE(CKEN);
- SAVE(PSTR);
-
- /* Note: wake up source are set up in each machine specific files */
-
- /* clear GPIO transition detect bits */
- GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2;
-#ifdef CONFIG_PXA27x
- GEDR3 = GEDR3;
-#endif
+ pxa_cpu_pm_fns->save(sleep_save);
/* Clear sleep reset status */
RCSR = RCSR_SMR;
/* before sleeping, calculate and save a checksum */
- for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++)
- checksum += sleep_save[i];
- sleep_save[SLEEP_SAVE_CKSUM] = checksum;
+ for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
+ sleep_save_checksum += sleep_save[i];
/* *** go zzz *** */
- pxa_cpu_pm_enter(state);
-
+ pxa_cpu_pm_fns->enter(state);
cpu_init();
/* after sleeping, validate the checksum */
- checksum = 0;
- for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++)
+ for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
checksum += sleep_save[i];
/* if invalid, display message and wait for a hardware reset */
- if (checksum != sleep_save[SLEEP_SAVE_CKSUM]) {
+ if (checksum != sleep_save_checksum) {
#ifdef CONFIG_ARCH_LUBBOCK
LUB_HEXLED = 0xbadbadc5;
#endif
while (1)
- pxa_cpu_pm_enter(state);
+ pxa_cpu_pm_fns->enter(state);
}
- /* ensure not to come back here if it wasn't intended */
- PSPR = 0;
-
- /* restore registers */
- RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2);
- RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2);
- RESTORE(GAFR0_L); RESTORE(GAFR0_U);
- RESTORE(GAFR1_L); RESTORE(GAFR1_U);
- RESTORE(GAFR2_L); RESTORE(GAFR2_U);
- RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2);
- RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2);
- RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2);
-
-#ifdef CONFIG_PXA27x
- RESTORE(MDREFR);
- RESTORE_GPLEVEL(3); RESTORE(GPDR3);
- RESTORE(GAFR3_L); RESTORE(GAFR3_U);
- RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3);
- RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER);
- RESTORE(PFER); RESTORE(PKWR);
-#endif
-
- PSSR = PSSR_RDH | PSSR_PH;
-
- RESTORE(CKEN);
-
- ICLR = 0;
- ICCR = 1;
- RESTORE(ICMR);
+ pxa_cpu_pm_fns->restore(sleep_save);
- RESTORE(PSTR);
-
- /* restore current time */
- rtc.tv_sec = RCNR;
- restore_time_delta(&delta, &rtc);
-
-#ifdef DEBUG
- printk(KERN_DEBUG "*** made it back from resume\n");
-#endif
+ pr_debug("*** made it back from resume\n");
return 0;
}
@@ -201,37 +78,32 @@ unsigned long sleep_phys_sp(void *sp)
return virt_to_phys(sp);
}
-/*
- * Called after processes are frozen, but before we shut down devices.
- */
-int pxa_pm_prepare(suspend_state_t state)
+static int pxa_pm_valid(suspend_state_t state)
{
- extern int pxa_cpu_pm_prepare(suspend_state_t state);
+ if (pxa_cpu_pm_fns)
+ return pxa_cpu_pm_fns->valid(state);
- return pxa_cpu_pm_prepare(state);
+ return -EINVAL;
}
-EXPORT_SYMBOL_GPL(pxa_pm_prepare);
-
-/*
- * Called after devices are re-setup, but before processes are thawed.
- */
-int pxa_pm_finish(suspend_state_t state)
-{
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(pxa_pm_finish);
-
static struct pm_ops pxa_pm_ops = {
- .prepare = pxa_pm_prepare,
+ .valid = pxa_pm_valid,
.enter = pxa_pm_enter,
- .finish = pxa_pm_finish,
- .valid = pm_valid_only_mem,
};
static int __init pxa_pm_init(void)
{
+ if (!pxa_cpu_pm_fns) {
+ printk(KERN_ERR "no valid pxa_cpu_pm_fns defined\n");
+ return -EINVAL;
+ }
+
+ sleep_save = kmalloc(pxa_cpu_pm_fns->save_size, GFP_KERNEL);
+ if (!sleep_save) {
+ printk(KERN_ERR "failed to alloc memory for pm save\n");
+ return -ENOMEM;
+ }
+
pm_set_ops(&pxa_pm_ops);
return 0;
}
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 34fb80b37023..655668d4d0e9 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -45,6 +45,7 @@
#include <asm/mach/sharpsl_param.h>
#include "generic.h"
+#include "devices.h"
#include "sharpsl.h"
static struct resource poodle_scoop_resources[] = {
@@ -412,7 +413,7 @@ MACHINE_START(POODLE, "SHARP Poodle")
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_poodle,
.map_io = pxa_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = poodle_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index c1f21739bf71..6dfcca72e90f 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -19,12 +19,17 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/platform_device.h>
#include <linux/pm.h>
#include <asm/hardware.h>
+#include <asm/arch/irqs.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pm.h>
+#include <asm/arch/dma.h>
#include "generic.h"
+#include "devices.h"
/*
* Various clock factors driven by the CCCR register.
@@ -105,32 +110,138 @@ EXPORT_SYMBOL(get_lcdclk_frequency_10khz);
#ifdef CONFIG_PM
-int pxa_cpu_pm_prepare(suspend_state_t state)
-{
- switch (state) {
- case PM_SUSPEND_MEM:
- break;
- default:
- return -EINVAL;
- }
+#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
+#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
+
+#define RESTORE_GPLEVEL(n) do { \
+ GPSR##n = sleep_save[SLEEP_SAVE_GPLR##n]; \
+ GPCR##n = ~sleep_save[SLEEP_SAVE_GPLR##n]; \
+} while (0)
+
+/*
+ * List of global PXA peripheral registers to preserve.
+ * More ones like CP and general purpose register values are preserved
+ * with the stack pointer in sleep.S.
+ */
+enum { SLEEP_SAVE_START = 0,
- return 0;
+ SLEEP_SAVE_GPLR0, SLEEP_SAVE_GPLR1, SLEEP_SAVE_GPLR2,
+ SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2,
+ SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2,
+ SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2,
+ SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2,
+
+ SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
+ SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
+ SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U,
+
+ SLEEP_SAVE_PSTR,
+
+ SLEEP_SAVE_ICMR,
+ SLEEP_SAVE_CKEN,
+
+ SLEEP_SAVE_SIZE
+};
+
+
+static void pxa25x_cpu_pm_save(unsigned long *sleep_save)
+{
+ SAVE(GPLR0); SAVE(GPLR1); SAVE(GPLR2);
+ SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2);
+ SAVE(GRER0); SAVE(GRER1); SAVE(GRER2);
+ SAVE(GFER0); SAVE(GFER1); SAVE(GFER2);
+ SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2);
+
+ SAVE(GAFR0_L); SAVE(GAFR0_U);
+ SAVE(GAFR1_L); SAVE(GAFR1_U);
+ SAVE(GAFR2_L); SAVE(GAFR2_U);
+
+ SAVE(ICMR);
+ SAVE(CKEN);
+ SAVE(PSTR);
}
-void pxa_cpu_pm_enter(suspend_state_t state)
+static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
{
- extern void pxa_cpu_suspend(unsigned int);
- extern void pxa_cpu_resume(void);
+ /* restore registers */
+ RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2);
+ RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2);
+ RESTORE(GAFR0_L); RESTORE(GAFR0_U);
+ RESTORE(GAFR1_L); RESTORE(GAFR1_U);
+ RESTORE(GAFR2_L); RESTORE(GAFR2_U);
+ RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2);
+ RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2);
+ RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2);
+
+ RESTORE(CKEN);
+ RESTORE(ICMR);
+ RESTORE(PSTR);
+}
+static void pxa25x_cpu_pm_enter(suspend_state_t state)
+{
CKEN = 0;
switch (state) {
case PM_SUSPEND_MEM:
/* set resume return address */
PSPR = virt_to_phys(pxa_cpu_resume);
- pxa_cpu_suspend(PWRMODE_SLEEP);
+ pxa25x_cpu_suspend(PWRMODE_SLEEP);
break;
}
}
+static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = {
+ .save_size = SLEEP_SAVE_SIZE,
+ .valid = pm_valid_only_mem,
+ .save = pxa25x_cpu_pm_save,
+ .restore = pxa25x_cpu_pm_restore,
+ .enter = pxa25x_cpu_pm_enter,
+};
+
+static void __init pxa25x_init_pm(void)
+{
+ pxa_cpu_pm_fns = &pxa25x_cpu_pm_fns;
+}
+#endif
+
+void __init pxa25x_init_irq(void)
+{
+ pxa_init_irq_low();
+ pxa_init_irq_gpio(85);
+}
+
+static struct platform_device *pxa25x_devices[] __initdata = {
+ &pxa_device_mci,
+ &pxa_device_udc,
+ &pxa_device_fb,
+ &pxa_device_ffuart,
+ &pxa_device_btuart,
+ &pxa_device_stuart,
+ &pxa_device_i2c,
+ &pxa_device_i2s,
+ &pxa_device_ficp,
+ &pxa_device_rtc,
+};
+
+static int __init pxa25x_init(void)
+{
+ int ret = 0;
+
+ if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
+ if ((ret = pxa_init_dma(16)))
+ return ret;
+#ifdef CONFIG_PM
+ pxa25x_init_pm();
#endif
+ ret = platform_add_devices(pxa25x_devices,
+ ARRAY_SIZE(pxa25x_devices));
+ }
+ /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
+ if (cpu_is_pxa25x())
+ ret = platform_device_register(&pxa_device_hwuart);
+
+ return ret;
+}
+
+subsys_initcall(pxa25x_init);
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 1939acc3f9f7..203371ab19db 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -19,10 +19,14 @@
#include <asm/hardware.h>
#include <asm/irq.h>
+#include <asm/arch/irqs.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/ohci.h>
+#include <asm/arch/pm.h>
+#include <asm/arch/dma.h>
#include "generic.h"
+#include "devices.h"
/* Crystal clock: 13MHz */
#define BASE_CLK 13000000
@@ -122,25 +126,107 @@ EXPORT_SYMBOL(get_lcdclk_frequency_10khz);
#ifdef CONFIG_PM
-int pxa_cpu_pm_prepare(suspend_state_t state)
+#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
+#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
+
+#define RESTORE_GPLEVEL(n) do { \
+ GPSR##n = sleep_save[SLEEP_SAVE_GPLR##n]; \
+ GPCR##n = ~sleep_save[SLEEP_SAVE_GPLR##n]; \
+} while (0)
+
+/*
+ * List of global PXA peripheral registers to preserve.
+ * More ones like CP and general purpose register values are preserved
+ * with the stack pointer in sleep.S.
+ */
+enum { SLEEP_SAVE_START = 0,
+
+ SLEEP_SAVE_GPLR0, SLEEP_SAVE_GPLR1, SLEEP_SAVE_GPLR2, SLEEP_SAVE_GPLR3,
+ SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2, SLEEP_SAVE_GPDR3,
+ SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2, SLEEP_SAVE_GRER3,
+ SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2, SLEEP_SAVE_GFER3,
+ SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
+
+ SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
+ SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
+ SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U,
+ SLEEP_SAVE_GAFR3_L, SLEEP_SAVE_GAFR3_U,
+
+ SLEEP_SAVE_PSTR,
+
+ SLEEP_SAVE_ICMR,
+ SLEEP_SAVE_CKEN,
+
+ SLEEP_SAVE_MDREFR,
+ SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
+ SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,
+
+ SLEEP_SAVE_SIZE
+};
+
+void pxa27x_cpu_pm_save(unsigned long *sleep_save)
{
- switch (state) {
- case PM_SUSPEND_MEM:
- case PM_SUSPEND_STANDBY:
- return 0;
- default:
- return -EINVAL;
- }
+ SAVE(GPLR0); SAVE(GPLR1); SAVE(GPLR2); SAVE(GPLR3);
+ SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2); SAVE(GPDR3);
+ SAVE(GRER0); SAVE(GRER1); SAVE(GRER2); SAVE(GRER3);
+ SAVE(GFER0); SAVE(GFER1); SAVE(GFER2); SAVE(GFER3);
+ SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2); SAVE(PGSR3);
+
+ SAVE(GAFR0_L); SAVE(GAFR0_U);
+ SAVE(GAFR1_L); SAVE(GAFR1_U);
+ SAVE(GAFR2_L); SAVE(GAFR2_U);
+ SAVE(GAFR3_L); SAVE(GAFR3_U);
+
+ SAVE(MDREFR);
+ SAVE(PWER); SAVE(PCFR); SAVE(PRER);
+ SAVE(PFER); SAVE(PKWR);
+
+ SAVE(ICMR); ICMR = 0;
+ SAVE(CKEN);
+ SAVE(PSTR);
+
+ /* Clear GPIO transition detect bits */
+ GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2; GEDR3 = GEDR3;
+}
+
+void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
+{
+ /* ensure not to come back here if it wasn't intended */
+ PSPR = 0;
+
+ /* restore registers */
+ RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1);
+ RESTORE_GPLEVEL(2); RESTORE_GPLEVEL(3);
+ RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2); RESTORE(GPDR3);
+ RESTORE(GAFR0_L); RESTORE(GAFR0_U);
+ RESTORE(GAFR1_L); RESTORE(GAFR1_U);
+ RESTORE(GAFR2_L); RESTORE(GAFR2_U);
+ RESTORE(GAFR3_L); RESTORE(GAFR3_U);
+ RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2); RESTORE(GRER3);
+ RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2); RESTORE(GFER3);
+ RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); RESTORE(PGSR3);
+
+ RESTORE(MDREFR);
+ RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER);
+ RESTORE(PFER); RESTORE(PKWR);
+
+ PSSR = PSSR_RDH | PSSR_PH;
+
+ RESTORE(CKEN);
+
+ ICLR = 0;
+ ICCR = 1;
+ RESTORE(ICMR);
+ RESTORE(PSTR);
}
-void pxa_cpu_pm_enter(suspend_state_t state)
+void pxa27x_cpu_pm_enter(suspend_state_t state)
{
extern void pxa_cpu_standby(void);
- extern void pxa_cpu_suspend(unsigned int);
- extern void pxa_cpu_resume(void);
if (state == PM_SUSPEND_STANDBY)
- CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER) | (1 << CKEN_LCD) | (1 << CKEN_PWM0);
+ CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER) |
+ (1 << CKEN_LCD) | (1 << CKEN_PWM0);
else
CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER);
@@ -157,11 +243,28 @@ void pxa_cpu_pm_enter(suspend_state_t state)
case PM_SUSPEND_MEM:
/* set resume return address */
PSPR = virt_to_phys(pxa_cpu_resume);
- pxa_cpu_suspend(PWRMODE_SLEEP);
+ pxa27x_cpu_suspend(PWRMODE_SLEEP);
break;
}
}
+static int pxa27x_cpu_pm_valid(suspend_state_t state)
+{
+ return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
+}
+
+static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = {
+ .save_size = SLEEP_SAVE_SIZE,
+ .save = pxa27x_cpu_pm_save,
+ .restore = pxa27x_cpu_pm_restore,
+ .valid = pxa27x_cpu_pm_valid,
+ .enter = pxa27x_cpu_pm_enter,
+};
+
+static void __init pxa27x_init_pm(void)
+{
+ pxa_cpu_pm_fns = &pxa27x_cpu_pm_fns;
+}
#endif
/*
@@ -183,7 +286,7 @@ static struct resource pxa27x_ohci_resources[] = {
},
};
-static struct platform_device ohci_device = {
+static struct platform_device pxa27x_device_ohci = {
.name = "pxa27x-ohci",
.id = -1,
.dev = {
@@ -196,16 +299,62 @@ static struct platform_device ohci_device = {
void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
{
- ohci_device.dev.platform_data = info;
+ pxa27x_device_ohci.dev.platform_data = info;
}
+static struct resource i2c_power_resources[] = {
+ {
+ .start = 0x40f00180,
+ .end = 0x40f001a3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PWRI2C,
+ .end = IRQ_PWRI2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device pxa27x_device_i2c_power = {
+ .name = "pxa2xx-i2c",
+ .id = 1,
+ .resource = i2c_power_resources,
+ .num_resources = ARRAY_SIZE(i2c_power_resources),
+};
+
static struct platform_device *devices[] __initdata = {
- &ohci_device,
+ &pxa_device_mci,
+ &pxa_device_udc,
+ &pxa_device_fb,
+ &pxa_device_ffuart,
+ &pxa_device_btuart,
+ &pxa_device_stuart,
+ &pxa_device_i2c,
+ &pxa_device_i2s,
+ &pxa_device_ficp,
+ &pxa_device_rtc,
+ &pxa27x_device_i2c_power,
+ &pxa27x_device_ohci,
};
+void __init pxa27x_init_irq(void)
+{
+ pxa_init_irq_low();
+ pxa_init_irq_high();
+ pxa_init_irq_gpio(128);
+}
+
static int __init pxa27x_init(void)
{
- return platform_add_devices(devices, ARRAY_SIZE(devices));
+ int ret = 0;
+ if (cpu_is_pxa27x()) {
+ if ((ret = pxa_init_dma(32)))
+ return ret;
+#ifdef CONFIG_PM
+ pxa27x_init_pm();
+#endif
+ ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+ }
+ return ret;
}
subsys_initcall(pxa27x_init);
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 15874b360e51..aff71fec618a 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -17,28 +17,12 @@
#include <asm/arch/pxa-regs.h>
-#ifdef CONFIG_PXA27x // workaround for Errata 50
#define MDREFR_KDIV 0x200a4000 // all banks
#define CCCR_SLEEP 0x00000107 // L=7 2N=2 A=0 PPDIS=0 CPDIS=0
-#endif
.text
-/*
- * pxa_cpu_suspend()
- *
- * Forces CPU into sleep state.
- *
- * r0 = value for PWRMODE M field for desired sleep state
- */
-
-ENTRY(pxa_cpu_suspend)
-
-#ifndef CONFIG_IWMMXT
- mra r2, r3, acc0
-#endif
- stmfd sp!, {r2 - r12, lr} @ save registers on stack
-
+pxa_cpu_save_cp:
@ get coprocessor registers
mrc p14, 0, r3, c6, c0, 0 @ clock configuration, for turbo mode
mrc p15, 0, r4, c15, c1, 0 @ CP access reg
@@ -54,12 +38,36 @@ ENTRY(pxa_cpu_suspend)
mov r10, sp
stmfd sp!, {r3 - r10}
- mov r5, r0 @ save sleep mode
+ mov pc, lr
+
+pxa_cpu_save_sp:
@ preserve phys address of stack
mov r0, sp
+ mov r2, lr
bl sleep_phys_sp
ldr r1, =sleep_save_sp
str r0, [r1]
+ mov pc, r2
+
+/*
+ * pxa27x_cpu_suspend()
+ *
+ * Forces CPU into sleep state.
+ *
+ * r0 = value for PWRMODE M field for desired sleep state
+ */
+
+ENTRY(pxa27x_cpu_suspend)
+
+#ifndef CONFIG_IWMMXT
+ mra r2, r3, acc0
+#endif
+ stmfd sp!, {r2 - r12, lr} @ save registers on stack
+
+ bl pxa_cpu_save_cp
+
+ mov r5, r0 @ save sleep mode
+ bl pxa_cpu_save_sp
@ clean data cache
bl xscale_flush_kern_cache_all
@@ -80,13 +88,55 @@ ENTRY(pxa_cpu_suspend)
@ enable SDRAM self-refresh mode
orr r5, r5, #MDREFR_SLFRSH
-#ifdef CONFIG_PXA27x
@ set SDCLKx divide-by-2 bits (this is part of a workaround for Errata 50)
ldr r6, =MDREFR_KDIV
orr r5, r5, r6
-#endif
-#ifdef CONFIG_PXA25x
+ @ Intel PXA270 Specification Update notes problems sleeping
+ @ with core operating above 91 MHz
+ @ (see Errata 50, ...processor does not exit from sleep...)
+
+ ldr r6, =CCCR
+ ldr r8, [r6] @ keep original value for resume
+
+ ldr r7, =CCCR_SLEEP @ prepare CCCR sleep value
+ mov r0, #0x2 @ prepare value for CLKCFG
+
+ @ align execution to a cache line
+ b pxa_cpu_do_suspend
+
+/*
+ * pxa27x_cpu_suspend()
+ *
+ * Forces CPU into sleep state.
+ *
+ * r0 = value for PWRMODE M field for desired sleep state
+ */
+
+ENTRY(pxa25x_cpu_suspend)
+ stmfd sp!, {r2 - r12, lr} @ save registers on stack
+
+ bl pxa_cpu_save_cp
+
+ mov r5, r0 @ save sleep mode
+ bl pxa_cpu_save_sp
+
+ @ clean data cache
+ bl xscale_flush_kern_cache_all
+
+ @ prepare value for sleep mode
+ mov r1, r5 @ sleep mode
+
+ @ prepare pointer to physical address 0 (virtual mapping in generic.c)
+ mov r2, #UNCACHED_PHYS_0
+
+ @ prepare SDRAM refresh settings
+ ldr r4, =MDREFR
+ ldr r5, [r4]
+
+ @ enable SDRAM self-refresh mode
+ orr r5, r5, #MDREFR_SLFRSH
+
@ Intel PXA255 Specification Update notes problems
@ about suspending with PXBus operating above 133MHz
@ (see Errata 31, GPIO output signals, ... unpredictable in sleep
@@ -118,30 +168,15 @@ ENTRY(pxa_cpu_suspend)
mov r0, #0
mcr p14, 0, r0, c6, c0, 0
orr r0, r0, #2 @ initiate change bit
-#endif
-#ifdef CONFIG_PXA27x
- @ Intel PXA270 Specification Update notes problems sleeping
- @ with core operating above 91 MHz
- @ (see Errata 50, ...processor does not exit from sleep...)
-
- ldr r6, =CCCR
- ldr r8, [r6] @ keep original value for resume
-
- ldr r7, =CCCR_SLEEP @ prepare CCCR sleep value
- mov r0, #0x2 @ prepare value for CLKCFG
-#endif
-
- @ align execution to a cache line
- b 1f
+ b pxa_cpu_do_suspend
.ltorg
.align 5
-1:
+pxa_cpu_do_suspend:
@ All needed values are now in registers.
@ These last instructions should be in cache
-#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
@ initiate the frequency change...
str r7, [r6]
mcr p14, 0, r0, c6, c0, 0
@@ -155,7 +190,6 @@ ENTRY(pxa_cpu_suspend)
mov r0, #42
10: subs r0, r0, #1
bne 10b
-#endif
@ Do not reorder...
@ Intel PXA270 Specification Update notes problems performing
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 3cbac63bed3c..bae47e145de8 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -48,6 +48,7 @@
#include <asm/hardware/scoop.h>
#include "generic.h"
+#include "devices.h"
#include "sharpsl.h"
/*
@@ -560,7 +561,7 @@ MACHINE_START(SPITZ, "SHARP Spitz")
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_spitz,
.map_io = pxa_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa27x_init_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
MACHINE_END
@@ -572,7 +573,7 @@ MACHINE_START(BORZOI, "SHARP Borzoi")
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_spitz,
.map_io = pxa_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa27x_init_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
MACHINE_END
@@ -584,7 +585,7 @@ MACHINE_START(AKITA, "SHARP Akita")
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_spitz,
.map_io = pxa_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa27x_init_irq,
.init_machine = akita_init,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 5248abe334d2..98d27e646b09 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -1,9 +1,11 @@
/*
* arch/arm/mach-pxa/time.c
*
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software Inc.
+ * PXA clocksource, clockevents, and OST interrupt handlers.
+ * Copyright (c) 2007 by Bill Gatliff <bgat@billgatliff.com>.
+ *
+ * Derived from Nicolas Pitre's PXA timer handler Copyright (c) 2001
+ * by MontaVista Software, Inc. (Nico, your code rocks!)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -12,173 +14,160 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/clocksource.h>
-
-#include <asm/system.h>
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/leds.h>
-#include <asm/irq.h>
+#include <linux/clockchips.h>
+
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/arch/pxa-regs.h>
-
-static inline unsigned long pxa_get_rtc_time(void)
+static irqreturn_t
+pxa_ost0_interrupt(int irq, void *dev_id)
{
- return RCNR;
+ int next_match;
+ struct clock_event_device *c = dev_id;
+
+ if (c->mode == CLOCK_EVT_MODE_ONESHOT) {
+ /* Disarm the compare/match, signal the event. */
+ OIER &= ~OIER_E0;
+ c->event_handler(c);
+ } else if (c->mode == CLOCK_EVT_MODE_PERIODIC) {
+ /* Call the event handler as many times as necessary
+ * to recover missed events, if any (if we update
+ * OSMR0 and OSCR0 is still ahead of us, we've missed
+ * the event). As we're dealing with that, re-arm the
+ * compare/match for the next event.
+ *
+ * HACK ALERT:
+ *
+ * There's a latency between the instruction that
+ * writes to OSMR0 and the actual commit to the
+ * physical hardware, because the CPU doesn't (have
+ * to) run at bus speed, there's a write buffer
+ * between the CPU and the bus, etc. etc. So if the
+ * target OSCR0 is "very close", to the OSMR0 load
+ * value, the update to OSMR0 might not get to the
+ * hardware in time and we'll miss that interrupt.
+ *
+ * To be safe, if the new OSMR0 is "very close" to the
+ * target OSCR0 value, we call the event_handler as
+ * though the event actually happened. According to
+ * Nico's comment in the previous version of this
+ * code, experience has shown that 6 OSCR ticks is
+ * "very close" but he went with 8. We will use 16,
+ * based on the results of testing on PXA270.
+ *
+ * To be doubly sure, we also tell clkevt via
+ * clockevents_register_device() not to ask for
+ * anything that might put us "very close".
+ */
+#define MIN_OSCR_DELTA 16
+ do {
+ OSSR = OSSR_M0;
+ next_match = (OSMR0 += LATCH);
+ c->event_handler(c);
+ } while (((signed long)(next_match - OSCR) <= MIN_OSCR_DELTA)
+ && (c->mode == CLOCK_EVT_MODE_PERIODIC));
+ }
+
+ return IRQ_HANDLED;
}
-static int pxa_set_rtc(void)
+static int
+pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev)
{
- unsigned long current_time = xtime.tv_sec;
+ unsigned long irqflags;
- if (RTSR & RTSR_ALE) {
- /* make sure not to forward the clock over an alarm */
- unsigned long alarm = RTAR;
- if (current_time >= alarm && alarm >= RCNR)
- return -ERESTARTSYS;
- }
- RCNR = current_time;
+ raw_local_irq_save(irqflags);
+ OSMR0 = OSCR + delta;
+ OSSR = OSSR_M0;
+ OIER |= OIER_E0;
+ raw_local_irq_restore(irqflags);
return 0;
}
-#ifdef CONFIG_NO_IDLE_HZ
-static unsigned long initial_match;
-static int match_posponed;
-#endif
-
-static irqreturn_t
-pxa_timer_interrupt(int irq, void *dev_id)
+static void
+pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
{
- int next_match;
-
- write_seqlock(&xtime_lock);
-
-#ifdef CONFIG_NO_IDLE_HZ
- if (match_posponed) {
- match_posponed = 0;
- OSMR0 = initial_match;
+ unsigned long irqflags;
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ raw_local_irq_save(irqflags);
+ OSMR0 = OSCR + LATCH;
+ OSSR = OSSR_M0;
+ OIER |= OIER_E0;
+ raw_local_irq_restore(irqflags);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ raw_local_irq_save(irqflags);
+ OIER &= ~OIER_E0;
+ raw_local_irq_restore(irqflags);
+ break;
+
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ /* initializing, released, or preparing for suspend */
+ raw_local_irq_save(irqflags);
+ OIER &= ~OIER_E0;
+ raw_local_irq_restore(irqflags);
+ break;
}
-#endif
-
- /* Loop until we get ahead of the free running timer.
- * This ensures an exact clock tick count and time accuracy.
- * Since IRQs are disabled at this point, coherence between
- * lost_ticks(updated in do_timer()) and the match reg value is
- * ensured, hence we can use do_gettimeofday() from interrupt
- * handlers.
- *
- * HACK ALERT: it seems that the PXA timer regs aren't updated right
- * away in all cases when a write occurs. We therefore compare with
- * 8 instead of 0 in the while() condition below to avoid missing a
- * match if OSCR has already reached the next OSMR value.
- * Experience has shown that up to 6 ticks are needed to work around
- * this problem, but let's use 8 to be conservative. Note that this
- * affect things only when the timer IRQ has been delayed by nearly
- * exactly one tick period which should be a pretty rare event.
- */
- do {
- timer_tick();
- OSSR = OSSR_M0; /* Clear match on timer 0 */
- next_match = (OSMR0 += LATCH);
- } while( (signed long)(next_match - OSCR) <= 8 );
-
- write_sequnlock(&xtime_lock);
-
- return IRQ_HANDLED;
}
-static struct irqaction pxa_timer_irq = {
- .name = "PXA Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = pxa_timer_interrupt,
+static struct clock_event_device ckevt_pxa_osmr0 = {
+ .name = "osmr0",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .rating = 200,
+ .cpumask = CPU_MASK_CPU0,
+ .set_next_event = pxa_osmr0_set_next_event,
+ .set_mode = pxa_osmr0_set_mode,
};
-static cycle_t pxa_get_cycles(void)
+static cycle_t pxa_read_oscr(void)
{
return OSCR;
}
-static struct clocksource clocksource_pxa = {
- .name = "pxa_timer",
+static struct clocksource cksrc_pxa_oscr0 = {
+ .name = "oscr0",
.rating = 200,
- .read = pxa_get_cycles,
+ .read = pxa_read_oscr,
.mask = CLOCKSOURCE_MASK(32),
.shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+static struct irqaction pxa_ost0_irq = {
+ .name = "ost0",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = pxa_ost0_interrupt,
+ .dev_id = &ckevt_pxa_osmr0,
+};
+
static void __init pxa_timer_init(void)
{
- struct timespec tv;
- unsigned long flags;
-
- set_rtc = pxa_set_rtc;
+ OIER = 0;
+ OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
- tv.tv_nsec = 0;
- tv.tv_sec = pxa_get_rtc_time();
- do_settimeofday(&tv);
+ ckevt_pxa_osmr0.mult =
+ div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt_pxa_osmr0.shift);
+ ckevt_pxa_osmr0.max_delta_ns =
+ clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
+ ckevt_pxa_osmr0.min_delta_ns =
+ clockevent_delta2ns(MIN_OSCR_DELTA, &ckevt_pxa_osmr0) + 1;
- OIER = 0; /* disable any timer interrupts */
- OSSR = 0xf; /* clear status on all timers */
- setup_irq(IRQ_OST0, &pxa_timer_irq);
- local_irq_save(flags);
- OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */
- OSMR0 = OSCR + LATCH; /* set initial match */
- local_irq_restore(flags);
-
- /*
- * OSCR runs continuously on PXA and is not written to,
- * so we can use it as clock source directly.
- */
- clocksource_pxa.mult =
- clocksource_hz2mult(CLOCK_TICK_RATE, clocksource_pxa.shift);
- clocksource_register(&clocksource_pxa);
-}
-
-#ifdef CONFIG_NO_IDLE_HZ
-static int pxa_dyn_tick_enable_disable(void)
-{
- /* nothing to do */
- return 0;
-}
+ cksrc_pxa_oscr0.mult =
+ clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_pxa_oscr0.shift);
-static void pxa_dyn_tick_reprogram(unsigned long ticks)
-{
- if (ticks > 1) {
- initial_match = OSMR0;
- OSMR0 = initial_match + ticks * LATCH;
- match_posponed = 1;
- }
-}
+ setup_irq(IRQ_OST0, &pxa_ost0_irq);
-static irqreturn_t
-pxa_dyn_tick_handler(int irq, void *dev_id)
-{
- if (match_posponed) {
- match_posponed = 0;
- OSMR0 = initial_match;
- if ( (signed long)(initial_match - OSCR) <= 8 )
- return pxa_timer_interrupt(irq, dev_id);
- }
- return IRQ_NONE;
+ clocksource_register(&cksrc_pxa_oscr0);
+ clockevents_register_device(&ckevt_pxa_osmr0);
}
-static struct dyn_tick_timer pxa_dyn_tick = {
- .enable = pxa_dyn_tick_enable_disable,
- .disable = pxa_dyn_tick_enable_disable,
- .reprogram = pxa_dyn_tick_reprogram,
- .handler = pxa_dyn_tick_handler,
-};
-#endif
-
#ifdef CONFIG_PM
static unsigned long osmr[4], oier;
@@ -200,7 +189,10 @@ static void pxa_timer_resume(void)
OIER = oier;
/*
- * OSMR0 is the system timer: make sure OSCR is sufficiently behind
+ * OSCR0 is the system timer, which has to increase
+ * monotonically until it rolls over in hardware. The value
+ * (OSMR0 - LATCH) is OSCR0 at the most recent system tick,
+ * which is a handy value to restore to OSCR0.
*/
OSCR = OSMR0 - LATCH;
}
@@ -213,7 +205,4 @@ struct sys_timer pxa_timer = {
.init = pxa_timer_init,
.suspend = pxa_timer_suspend,
.resume = pxa_timer_resume,
-#ifdef CONFIG_NO_IDLE_HZ
- .dyn_tick = &pxa_dyn_tick,
-#endif
};
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 72738771fb57..240fd042083d 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -42,7 +42,7 @@
#include <asm/mach/sharpsl_param.h>
#include "generic.h"
-
+#include "devices.h"
/*
* SCOOP Device
@@ -332,7 +332,7 @@ MACHINE_START(TOSA, "SHARP Tosa")
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_tosa,
.map_io = pxa_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa25x_init_irq,
.init_machine = tosa_init,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 28c79bd0a3a0..e4ba43bdf85d 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -49,6 +49,7 @@
#include <asm/arch/ohci.h>
#include "generic.h"
+#include "devices.h"
/********************************************************************************************
* ONBOARD FLASH
@@ -503,7 +504,7 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
.boot_params = TRIZEPS4_SDRAM_BASE + 0x100,
.init_machine = trizeps4_init,
.map_io = trizeps4_map_io,
- .init_irq = pxa_init_irq,
+ .init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
MACHINE_END
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-07 19:15:28 +0100