6 files changed, 605 insertions, 7 deletions

diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 21ddf6b29280..103bed48b46e 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -15,10 +15,17 @@ obj-				:=
 obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
 obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
 
+obj-y				+= irq.o
+obj-y				+= irq-eint.o
+
 # setup support
 
 obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
 
+# PM
+
+obj-$(CONFIG_PM)		+= irq-pm.o
+
 # Machine support
 
 obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
diff --git a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
index 33a8fe240882..dd362604dcce 100644
--- a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
@@ -13,6 +13,6 @@
 */
 
 #include <mach/map.h>
-#include <plat/irqs.h>
+#include <mach/irqs.h>
 
 #include <asm/entry-macro-vic2.S>
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
index 4c97f9a4370b..44bb3e491b5c 100644
--- a/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -1,16 +1,214 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/irqs.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/irqs.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *      http://armlinux.simtec.co.uk/
  *
- * S3C6400 - IRQ definitions
+ * S3C64XX - IRQ support
  */
 
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
+#ifndef __ASM_MACH_S3C64XX_IRQS_H
+#define __ASM_MACH_S3C64XX_IRQS_H __FILE__
 
-#include <plat/irqs.h>
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S3C_IRQ_OFFSET	(32)
+
+#define S3C_IRQ(x)	((x) + S3C_IRQ_OFFSET)
+
+#define IRQ_VIC0_BASE	S3C_IRQ(0)
+#define IRQ_VIC1_BASE	S3C_IRQ(32)
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S3CUART_BASE0	(16)
+#define IRQ_S3CUART_BASE1	(20)
+#define IRQ_S3CUART_BASE2	(24)
+#define IRQ_S3CUART_BASE3	(28)
+
+#define UART_IRQ_RXD		(0)
+#define UART_IRQ_ERR		(1)
+#define UART_IRQ_TXD		(2)
+#define UART_IRQ_MODEM		(3)
+
+#define IRQ_S3CUART_RX0		(IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX0		(IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR0	(IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX1		(IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX1		(IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR1	(IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX2		(IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX2		(IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR2	(IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX3		(IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX3		(IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR3	(IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
+
+/* VIC based IRQs */
+
+#define S3C64XX_IRQ_VIC0(x)	(IRQ_VIC0_BASE + (x))
+#define S3C64XX_IRQ_VIC1(x)	(IRQ_VIC1_BASE + (x))
+
+/* VIC0 */
+
+#define IRQ_EINT0_3		S3C64XX_IRQ_VIC0(0)
+#define IRQ_EINT4_11		S3C64XX_IRQ_VIC0(1)
+#define IRQ_RTC_TIC		S3C64XX_IRQ_VIC0(2)
+#define IRQ_CAMIF_C		S3C64XX_IRQ_VIC0(3)
+#define IRQ_CAMIF_P		S3C64XX_IRQ_VIC0(4)
+#define IRQ_CAMIF_MC		S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIC1	S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIS		S3C64XX_IRQ_VIC0(6)
+#define IRQ_S3C6400_CAMIF_MP	S3C64XX_IRQ_VIC0(6)
+#define IRQ_CAMIF_WE_C		S3C64XX_IRQ_VIC0(7)
+#define IRQ_S3C6410_G3D		S3C64XX_IRQ_VIC0(8)
+#define IRQ_S3C6400_CAMIF_WE_P	S3C64XX_IRQ_VIC0(8)
+#define IRQ_POST0		S3C64XX_IRQ_VIC0(9)
+#define IRQ_ROTATOR		S3C64XX_IRQ_VIC0(10)
+#define IRQ_2D			S3C64XX_IRQ_VIC0(11)
+#define IRQ_TVENC		S3C64XX_IRQ_VIC0(12)
+#define IRQ_SCALER		S3C64XX_IRQ_VIC0(13)
+#define IRQ_BATF		S3C64XX_IRQ_VIC0(14)
+#define IRQ_JPEG		S3C64XX_IRQ_VIC0(15)
+#define IRQ_MFC			S3C64XX_IRQ_VIC0(16)
+#define IRQ_SDMA0		S3C64XX_IRQ_VIC0(17)
+#define IRQ_SDMA1		S3C64XX_IRQ_VIC0(18)
+#define IRQ_ARM_DMAERR		S3C64XX_IRQ_VIC0(19)
+#define IRQ_ARM_DMA		S3C64XX_IRQ_VIC0(20)
+#define IRQ_ARM_DMAS		S3C64XX_IRQ_VIC0(21)
+#define IRQ_KEYPAD		S3C64XX_IRQ_VIC0(22)
+#define IRQ_TIMER0_VIC		S3C64XX_IRQ_VIC0(23)
+#define IRQ_TIMER1_VIC		S3C64XX_IRQ_VIC0(24)
+#define IRQ_TIMER2_VIC		S3C64XX_IRQ_VIC0(25)
+#define IRQ_WDT			S3C64XX_IRQ_VIC0(26)
+#define IRQ_TIMER3_VIC		S3C64XX_IRQ_VIC0(27)
+#define IRQ_TIMER4_VIC		S3C64XX_IRQ_VIC0(28)
+#define IRQ_LCD_FIFO		S3C64XX_IRQ_VIC0(29)
+#define IRQ_LCD_VSYNC		S3C64XX_IRQ_VIC0(30)
+#define IRQ_LCD_SYSTEM		S3C64XX_IRQ_VIC0(31)
+
+/* VIC1 */
+
+#define IRQ_EINT12_19		S3C64XX_IRQ_VIC1(0)
+#define IRQ_EINT20_27		S3C64XX_IRQ_VIC1(1)
+#define IRQ_PCM0		S3C64XX_IRQ_VIC1(2)
+#define IRQ_PCM1		S3C64XX_IRQ_VIC1(3)
+#define IRQ_AC97		S3C64XX_IRQ_VIC1(4)
+#define IRQ_UART0		S3C64XX_IRQ_VIC1(5)
+#define IRQ_UART1		S3C64XX_IRQ_VIC1(6)
+#define IRQ_UART2		S3C64XX_IRQ_VIC1(7)
+#define IRQ_UART3		S3C64XX_IRQ_VIC1(8)
+#define IRQ_DMA0		S3C64XX_IRQ_VIC1(9)
+#define IRQ_DMA1		S3C64XX_IRQ_VIC1(10)
+#define IRQ_ONENAND0		S3C64XX_IRQ_VIC1(11)
+#define IRQ_ONENAND1		S3C64XX_IRQ_VIC1(12)
+#define IRQ_NFC			S3C64XX_IRQ_VIC1(13)
+#define IRQ_CFCON		S3C64XX_IRQ_VIC1(14)
+#define IRQ_USBH		S3C64XX_IRQ_VIC1(15)
+#define IRQ_SPI0		S3C64XX_IRQ_VIC1(16)
+#define IRQ_SPI1		S3C64XX_IRQ_VIC1(17)
+#define IRQ_IIC			S3C64XX_IRQ_VIC1(18)
+#define IRQ_HSItx		S3C64XX_IRQ_VIC1(19)
+#define IRQ_HSIrx		S3C64XX_IRQ_VIC1(20)
+#define IRQ_RESERVED		S3C64XX_IRQ_VIC1(21)
+#define IRQ_MSM			S3C64XX_IRQ_VIC1(22)
+#define IRQ_HOSTIF		S3C64XX_IRQ_VIC1(23)
+#define IRQ_HSMMC0		S3C64XX_IRQ_VIC1(24)
+#define IRQ_HSMMC1		S3C64XX_IRQ_VIC1(25)
+#define IRQ_HSMMC2		IRQ_SPI1	/* shared with SPI1 */
+#define IRQ_OTG			S3C64XX_IRQ_VIC1(26)
+#define IRQ_IRDA		S3C64XX_IRQ_VIC1(27)
+#define IRQ_RTC_ALARM		S3C64XX_IRQ_VIC1(28)
+#define IRQ_SEC			S3C64XX_IRQ_VIC1(29)
+#define IRQ_PENDN		S3C64XX_IRQ_VIC1(30)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_ADC			S3C64XX_IRQ_VIC1(31)
+
+#define S3C64XX_TIMER_IRQ(x)	S3C_IRQ(64 + (x))
+
+#define IRQ_TIMER0		S3C64XX_TIMER_IRQ(0)
+#define IRQ_TIMER1		S3C64XX_TIMER_IRQ(1)
+#define IRQ_TIMER2		S3C64XX_TIMER_IRQ(2)
+#define IRQ_TIMER3		S3C64XX_TIMER_IRQ(3)
+#define IRQ_TIMER4		S3C64XX_TIMER_IRQ(4)
+
+/* compatibility for device defines */
+
+#define IRQ_IIC1		IRQ_S3C6410_IIC1
+
+/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
+ * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
+ * which we place after the pair of VICs. */
+
+#define S3C_IRQ_EINT_BASE	S3C_IRQ(64+5)
+
+#define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
+#define IRQ_EINT(x)		S3C_EINT(x)
+#define IRQ_EINT_BIT(x)		((x) - S3C_EINT(0))
+
+/* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
+ * that they are sourced from the GPIO pins but with a different scheme for
+ * priority and source indication.
+ *
+ * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
+ * interrupts, but for historical reasons they are kept apart from these
+ * next interrupts.
+ *
+ * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
+ * machine specific support files.
+ */
+
+#define IRQ_EINT_GROUP1_NR	(15)
+#define IRQ_EINT_GROUP2_NR	(8)
+#define IRQ_EINT_GROUP3_NR	(5)
+#define IRQ_EINT_GROUP4_NR	(14)
+#define IRQ_EINT_GROUP5_NR	(7)
+#define IRQ_EINT_GROUP6_NR	(10)
+#define IRQ_EINT_GROUP7_NR	(16)
+#define IRQ_EINT_GROUP8_NR	(15)
+#define IRQ_EINT_GROUP9_NR	(9)
+
+#define IRQ_EINT_GROUP_BASE	S3C_EINT(28)
+#define IRQ_EINT_GROUP1_BASE	(IRQ_EINT_GROUP_BASE + 0x00)
+#define IRQ_EINT_GROUP2_BASE	(IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
+#define IRQ_EINT_GROUP3_BASE	(IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
+#define IRQ_EINT_GROUP4_BASE	(IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR)
+#define IRQ_EINT_GROUP5_BASE	(IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR)
+#define IRQ_EINT_GROUP6_BASE	(IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
+#define IRQ_EINT_GROUP7_BASE	(IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
+#define IRQ_EINT_GROUP8_BASE	(IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR)
+#define IRQ_EINT_GROUP9_BASE	(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR)
+
+#define IRQ_EINT_GROUP(group, no)	(IRQ_EINT_GROUP##group##_BASE + (no))
+
+/* Define a group of interrupts for board-specific use (eg, for MFD
+ * interrupt controllers). */
+#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+#define IRQ_BOARD_NR 64
+#else
+#define IRQ_BOARD_NR 16
+#endif
+
+#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS	(IRQ_BOARD_END + 1)
+
+#endif /* __ASM_MACH_S3C64XX_IRQS_H */
 
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/irq-eint.c b/arch/arm/mach-s3c64xx/irq-eint.c
new file mode 100644
index 000000000000..5682d6a7f4af
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/irq-eint.c
@@ -0,0 +1,213 @@
+/* arch/arm/plat-s3c64xx/irq-eint.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling for IRQ_EINT(x)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <plat/regs-irqtype.h>
+#include <mach/regs-gpio.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#define eint_offset(irq)	((irq) - IRQ_EINT(0))
+#define eint_irq_to_bit(irq)	(1 << eint_offset(irq))
+
+static inline void s3c_irq_eint_mask(unsigned int irq)
+{
+	u32 mask;
+
+	mask = __raw_readl(S3C64XX_EINT0MASK);
+	mask |= eint_irq_to_bit(irq);
+	__raw_writel(mask, S3C64XX_EINT0MASK);
+}
+
+static void s3c_irq_eint_unmask(unsigned int irq)
+{
+	u32 mask;
+
+	mask = __raw_readl(S3C64XX_EINT0MASK);
+	mask &= ~eint_irq_to_bit(irq);
+	__raw_writel(mask, S3C64XX_EINT0MASK);
+}
+
+static inline void s3c_irq_eint_ack(unsigned int irq)
+{
+	__raw_writel(eint_irq_to_bit(irq), S3C64XX_EINT0PEND);
+}
+
+static void s3c_irq_eint_maskack(unsigned int irq)
+{
+	/* compiler should in-line these */
+	s3c_irq_eint_mask(irq);
+	s3c_irq_eint_ack(irq);
+}
+
+static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
+{
+	int offs = eint_offset(irq);
+	int pin, pin_val;
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+	void __iomem *reg;
+
+	if (offs > 27)
+		return -EINVAL;
+
+	if (offs <= 15)
+		reg = S3C64XX_EINT0CON0;
+	else
+		reg = S3C64XX_EINT0CON1;
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		printk(KERN_WARNING "No edge setting!\n");
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S3C2410_EXTINT_RISEEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S3C2410_EXTINT_FALLEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S3C2410_EXTINT_BOTHEDGE;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S3C2410_EXTINT_LOWLEV;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S3C2410_EXTINT_HILEV;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -1;
+	}
+
+	if (offs <= 15)
+		shift = (offs / 2) * 4;
+	else
+		shift = ((offs - 16) / 2) * 4;
+	mask = 0x7 << shift;
+
+	ctrl = __raw_readl(reg);
+	ctrl &= ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, reg);
+
+	/* set the GPIO pin appropriately */
+
+	if (offs < 16) {
+		pin = S3C64XX_GPN(offs);
+		pin_val = S3C_GPIO_SFN(2);
+	} else if (offs < 23) {
+		pin = S3C64XX_GPL(offs + 8 - 16);
+		pin_val = S3C_GPIO_SFN(3);
+	} else {
+		pin = S3C64XX_GPM(offs - 23);
+		pin_val = S3C_GPIO_SFN(3);
+	}
+
+	s3c_gpio_cfgpin(pin, pin_val);
+
+	return 0;
+}
+
+static struct irq_chip s3c_irq_eint = {
+	.name		= "s3c-eint",
+	.mask		= s3c_irq_eint_mask,
+	.unmask		= s3c_irq_eint_unmask,
+	.mask_ack	= s3c_irq_eint_maskack,
+	.ack		= s3c_irq_eint_ack,
+	.set_type	= s3c_irq_eint_set_type,
+	.set_wake	= s3c_irqext_wake,
+};
+
+/* s3c_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into
+ * the specific handlers s3c_irq_demux_eintX_Y.
+ */
+static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
+{
+	u32 status = __raw_readl(S3C64XX_EINT0PEND);
+	u32 mask = __raw_readl(S3C64XX_EINT0MASK);
+	unsigned int irq;
+
+	status &= ~mask;
+	status >>= start;
+	status &= (1 << (end - start + 1)) - 1;
+
+	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+		if (status & 1)
+			generic_handle_irq(irq);
+
+		status >>= 1;
+	}
+}
+
+static void s3c_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(0, 3);
+}
+
+static void s3c_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(4, 11);
+}
+
+static void s3c_irq_demux_eint12_19(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(12, 19);
+}
+
+static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(20, 27);
+}
+
+static int __init s3c64xx_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
+		set_irq_chip(irq, &s3c_irq_eint);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
+	set_irq_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11);
+	set_irq_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19);
+	set_irq_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27);
+
+	return 0;
+}
+
+arch_initcall(s3c64xx_init_irq_eint);
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
new file mode 100644
index 000000000000..da1bec64b9da
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -0,0 +1,111 @@
+/* arch/arm/plat-s3c64xx/irq-pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling Power Management
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+#include <plat/regs-timer.h>
+#include <mach/regs-gpio.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+/* We handled all the IRQ types in this code, to save having to make several
+ * small files to handle each different type separately. Having the EINT_GRP
+ * code here shouldn't be as much bloat as the IRQ table space needed when
+ * they are enabled. The added benefit is we ensure that these registers are
+ * in the same state as we suspended.
+ */
+
+static struct sleep_save irq_save[] = {
+	SAVE_ITEM(S3C64XX_PRIORITY),
+	SAVE_ITEM(S3C64XX_EINT0CON0),
+	SAVE_ITEM(S3C64XX_EINT0CON1),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON0),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON1),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON2),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON3),
+	SAVE_ITEM(S3C64XX_EINT0MASK),
+	SAVE_ITEM(S3C64XX_TINT_CSTAT),
+};
+
+static struct irq_grp_save {
+	u32	fltcon;
+	u32	con;
+	u32	mask;
+} eint_grp_save[5];
+
+static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: suspending IRQs\n", __func__);
+
+	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		grp->con = __raw_readl(S3C64XX_EINT12CON + (i * 4));
+		grp->mask = __raw_readl(S3C64XX_EINT12MASK + (i * 4));
+		grp->fltcon = __raw_readl(S3C64XX_EINT12FLTCON + (i * 4));
+	}
+
+	return 0;
+}
+
+static int s3c64xx_irq_pm_resume(struct sys_device *dev)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: resuming IRQs\n", __func__);
+
+	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		__raw_writel(grp->con, S3C64XX_EINT12CON + (i * 4));
+		__raw_writel(grp->mask, S3C64XX_EINT12MASK + (i * 4));
+		__raw_writel(grp->fltcon, S3C64XX_EINT12FLTCON + (i * 4));
+	}
+
+	S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
+	return 0;
+}
+
+static struct sysdev_driver s3c64xx_irq_driver = {
+	.suspend = s3c64xx_irq_pm_suspend,
+	.resume	 = s3c64xx_irq_pm_resume,
+};
+
+static int __init s3c64xx_irq_pm_init(void)
+{
+	return sysdev_driver_register(&s3c64xx_sysclass, &s3c64xx_irq_driver);
+}
+
+arch_initcall(s3c64xx_irq_pm_init);
+
diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c
new file mode 100644
index 000000000000..67a145d440f3
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/irq.c
@@ -0,0 +1,69 @@
+/* arch/arm/plat-s3c64xx/irq.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/irq-uart.h>
+#include <plat/cpu.h>
+
+static struct s3c_uart_irq uart_irqs[] = {
+	[0] = {
+		.regs		= S3C_VA_UART0,
+		.base_irq	= IRQ_S3CUART_BASE0,
+		.parent_irq	= IRQ_UART0,
+	},
+	[1] = {
+		.regs		= S3C_VA_UART1,
+		.base_irq	= IRQ_S3CUART_BASE1,
+		.parent_irq	= IRQ_UART1,
+	},
+	[2] = {
+		.regs		= S3C_VA_UART2,
+		.base_irq	= IRQ_S3CUART_BASE2,
+		.parent_irq	= IRQ_UART2,
+	},
+	[3] = {
+		.regs		= S3C_VA_UART3,
+		.base_irq	= IRQ_S3CUART_BASE3,
+		.parent_irq	= IRQ_UART3,
+	},
+};
+
+
+void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
+{
+	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+	/* initialise the pair of VICs */
+	vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, 0);
+	vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, 0);
+
+	/* add the timer sub-irqs */
+
+	s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
+	s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
+	s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
+	s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
+	s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
+
+	s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
+}