diff options
Diffstat (limited to 'arch/arm/mach-s3c64xx')
22 files changed, 471 insertions, 2078 deletions
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 041da5172423..7094bccbae91 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -3,16 +3,7 @@ # # Licensed under GPLv2 -# temporary until we can eliminate all drivers using it. -config PLAT_S3C64XX - bool - depends on ARCH_S3C64XX - default y - select PM_GENERIC_DOMAINS - select SAMSUNG_WAKEMASK - help - Base platform code for any Samsung S3C64XX device - +if ARCH_S3C64XX # Configuration options for the S3C6410 CPU @@ -26,9 +17,10 @@ config CPU_S3C6410 help Enable S3C6410 CPU support -config S3C64XX_DMA - bool "S3C64XX DMA" - select S3C_DMA +config S3C64XX_PL080 + bool "S3C64XX DMA using generic PL08x driver" + select AMBA_PL08X + select SAMSUNG_DMADEV config S3C64XX_SETUP_SDHCI bool @@ -306,3 +298,21 @@ config MACH_WLF_CRAGG_6410 select SAMSUNG_GPIO_EXTRA128 help Machine support for the Wolfson Cragganmore S3C6410 variant. + +config MACH_S3C64XX_DT + bool "Samsung S3C6400/S3C6410 machine using Device Tree" + select CLKSRC_OF + select CPU_S3C6400 + select CPU_S3C6410 + select PINCTRL + select PINCTRL_S3C64XX + select USE_OF + help + Machine support for Samsung S3C6400/S3C6410 machines with Device Tree + enabled. + Select this if a fdt blob is available for your S3C64XX SoC based + board. + Note: This is under development and not all peripherals can be + supported with this machine file. + +endif diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 31d0c9101272..58069a702a43 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -12,7 +12,7 @@ obj- := # Core -obj-y += common.o clock.o +obj-y += common.o # Core support @@ -26,7 +26,7 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o # DMA support -obj-$(CONFIG_S3C64XX_DMA) += dma.o +obj-$(CONFIG_S3C64XX_PL080) += pl080.o # Device support @@ -57,3 +57,4 @@ obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o +obj-$(CONFIG_MACH_S3C64XX_DT) += mach-s3c64xx-dt.o diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c deleted file mode 100644 index c1bcc4a6d3a8..000000000000 --- a/arch/arm/mach-s3c64xx/clock.c +++ /dev/null @@ -1,1007 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/clock.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX Base clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> - -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/cpu-freq.h> -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/pll.h> - -#include "regs-sys.h" - -/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call - * ext_xtal_mux for want of an actual name from the manual. -*/ - -static struct clk clk_ext_xtal_mux = { - .name = "ext_xtal", -}; - -#define clk_fin_apll clk_ext_xtal_mux -#define clk_fin_mpll clk_ext_xtal_mux -#define clk_fin_epll clk_ext_xtal_mux - -#define clk_fout_mpll clk_mpll -#define clk_fout_epll clk_epll - -struct clk clk_h2 = { - .name = "hclk2", - .rate = 0, -}; - -struct clk clk_27m = { - .name = "clk_27m", - .rate = 27000000, -}; - -static int clk_48m_ctrl(struct clk *clk, int enable) -{ - unsigned long flags; - u32 val; - - /* can't rely on clock lock, this register has other usages */ - local_irq_save(flags); - - val = __raw_readl(S3C64XX_OTHERS); - if (enable) - val |= S3C64XX_OTHERS_USBMASK; - else - val &= ~S3C64XX_OTHERS_USBMASK; - - __raw_writel(val, S3C64XX_OTHERS); - local_irq_restore(flags); - - return 0; -} - -struct clk clk_48m = { - .name = "clk_48m", - .rate = 48000000, - .enable = clk_48m_ctrl, -}; - -struct clk clk_xusbxti = { - .name = "xusbxti", - .rate = 48000000, -}; - -static int inline s3c64xx_gate(void __iomem *reg, - struct clk *clk, - int enable) -{ - unsigned int ctrlbit = clk->ctrlbit; - u32 con; - - con = __raw_readl(reg); - - if (enable) - con |= ctrlbit; - else - con &= ~ctrlbit; - - __raw_writel(con, reg); - return 0; -} - -static int s3c64xx_pclk_ctrl(struct clk *clk, int enable) -{ - return s3c64xx_gate(S3C_PCLK_GATE, clk, enable); -} - -static int s3c64xx_hclk_ctrl(struct clk *clk, int enable) -{ - return s3c64xx_gate(S3C_HCLK_GATE, clk, enable); -} - -int s3c64xx_sclk_ctrl(struct clk *clk, int enable) -{ - return s3c64xx_gate(S3C_SCLK_GATE, clk, enable); -} - -static struct clk init_clocks_off[] = { - { - .name = "nand", - .parent = &clk_h, - }, { - .name = "rtc", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_RTC, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_TSADC, - }, { - .name = "i2c", - .devname = "s3c2440-i2c.0", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_IIC, - }, { - .name = "i2c", - .devname = "s3c2440-i2c.1", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C6410_CLKCON_PCLK_I2C1, - }, { - .name = "keypad", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_KEYPAD, - }, { - .name = "spi", - .devname = "s3c6410-spi.0", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_SPI0, - }, { - .name = "spi", - .devname = "s3c6410-spi.1", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_SPI1, - }, { - .name = "48m", - .devname = "s3c-sdhci.0", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_MMC0_48, - }, { - .name = "48m", - .devname = "s3c-sdhci.1", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_MMC1_48, - }, { - .name = "48m", - .devname = "s3c-sdhci.2", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_MMC2_48, - }, { - .name = "ac97", - .parent = &clk_p, - .ctrlbit = S3C_CLKCON_PCLK_AC97, - }, { - .name = "cfcon", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_IHOST, - }, { - .name = "dma0", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_DMA0, - }, { - .name = "dma1", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_DMA1, - }, { - .name = "3dse", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_3DSE, - }, { - .name = "hclk_secur", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_SECUR, - }, { - .name = "sdma1", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_SDMA1, - }, { - .name = "sdma0", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_SDMA0, - }, { - .name = "hclk_jpeg", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_JPEG, - }, { - .name = "camif", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_CAMIF, - }, { - .name = "hclk_scaler", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_SCALER, - }, { - .name = "2d", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_2D, - }, { - .name = "tv", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_TV, - }, { - .name = "post0", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_POST0, - }, { - .name = "rot", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_ROT, - }, { - .name = "hclk_mfc", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_MFC, - }, { - .name = "pclk_mfc", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_MFC, - }, { - .name = "dac27", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_DAC27, - }, { - .name = "tv27", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_TV27, - }, { - .name = "scaler27", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SCALER27, - }, { - .name = "sclk_scaler", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SCALER, - }, { - .name = "post0_27", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_POST0_27, - }, { - .name = "secur", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SECUR, - }, { - .name = "sclk_mfc", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_MFC, - }, { - .name = "sclk_jpeg", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_JPEG, - }, -}; - -static struct clk clk_48m_spi0 = { - .name = "spi_48m", - .devname = "s3c6410-spi.0", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SPI0_48, -}; - -static struct clk clk_48m_spi1 = { - .name = "spi_48m", - .devname = "s3c6410-spi.1", - .parent = &clk_48m, - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_SPI1_48, -}; - -static struct clk clk_i2s0 = { - .name = "iis", - .devname = "samsung-i2s.0", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_IIS0, -}; - -static struct clk clk_i2s1 = { - .name = "iis", - .devname = "samsung-i2s.1", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_IIS1, -}; - -#ifdef CONFIG_CPU_S3C6410 -static struct clk clk_i2s2 = { - .name = "iis", - .devname = "samsung-i2s.2", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C6410_CLKCON_PCLK_IIS2, -}; -#endif - -static struct clk init_clocks[] = { - { - .name = "lcd", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_LCD, - }, { - .name = "gpio", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_GPIO, - }, { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_UHOST, - }, { - .name = "otg", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_USB, - }, { - .name = "timers", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_PWM, - }, { - .name = "uart", - .devname = "s3c6400-uart.0", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_UART0, - }, { - .name = "uart", - .devname = "s3c6400-uart.1", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_UART1, - }, { - .name = "uart", - .devname = "s3c6400-uart.2", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_UART2, - }, { - .name = "uart", - .devname = "s3c6400-uart.3", - .parent = &clk_p, - .enable = s3c64xx_pclk_ctrl, - .ctrlbit = S3C_CLKCON_PCLK_UART3, - }, { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = S3C_CLKCON_PCLK_WDT, - }, -}; - -static struct clk clk_hsmmc0 = { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_HSMMC0, -}; - -static struct clk clk_hsmmc1 = { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_HSMMC1, -}; - -static struct clk clk_hsmmc2 = { - .name = "hsmmc", - .devname = "s3c-sdhci.2", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_HSMMC2, -}; - -static struct clk clk_fout_apll = { - .name = "fout_apll", -}; - -static struct clk *clk_src_apll_list[] = { - [0] = &clk_fin_apll, - [1] = &clk_fout_apll, -}; - -static struct clksrc_sources clk_src_apll = { - .sources = clk_src_apll_list, - .nr_sources = ARRAY_SIZE(clk_src_apll_list), -}; - -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 0, .size = 1 }, - .sources = &clk_src_apll, -}; - -static struct clk *clk_src_epll_list[] = { - [0] = &clk_fin_epll, - [1] = &clk_fout_epll, -}; - -static struct clksrc_sources clk_src_epll = { - .sources = clk_src_epll_list, - .nr_sources = ARRAY_SIZE(clk_src_epll_list), -}; - -static struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 2, .size = 1 }, - .sources = &clk_src_epll, -}; - -static struct clk *clk_src_mpll_list[] = { - [0] = &clk_fin_mpll, - [1] = &clk_fout_mpll, -}; - -static struct clksrc_sources clk_src_mpll = { - .sources = clk_src_mpll_list, - .nr_sources = ARRAY_SIZE(clk_src_mpll_list), -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 1, .size = 1 }, - .sources = &clk_src_mpll, -}; - -static unsigned int armclk_mask; - -static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - u32 clkdiv; - - /* divisor mask starts at bit0, so no need to shift */ - clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask; - - return rate / (clkdiv + 1); -} - -static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk, - unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - u32 div; - - if (parent < rate) - return parent; - - div = (parent / rate) - 1; - if (div > armclk_mask) - div = armclk_mask; - - return parent / (div + 1); -} - -static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - u32 div; - u32 val; - - if (rate < parent / (armclk_mask + 1)) - return -EINVAL; - - rate = clk_round_rate(clk, rate); - div = clk_get_rate(clk->parent) / rate; - - val = __raw_readl(S3C_CLK_DIV0); - val &= ~armclk_mask; - val |= (div - 1); - __raw_writel(val, S3C_CLK_DIV0); - - return 0; - -} - -static struct clk clk_arm = { - .name = "armclk", - .parent = &clk_mout_apll.clk, - .ops = &(struct clk_ops) { - .get_rate = s3c64xx_clk_arm_get_rate, - .set_rate = s3c64xx_clk_arm_set_rate, - .round_rate = s3c64xx_clk_arm_round_rate, - }, -}; - -static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - - printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - - if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK) - rate /= 2; - - return rate; -} - -static struct clk_ops clk_dout_ops = { - .get_rate = s3c64xx_clk_doutmpll_get_rate, -}; - -static struct clk clk_dout_mpll = { - .name = "dout_mpll", - .parent = &clk_mout_mpll.clk, - .ops = &clk_dout_ops, -}; - -static struct clk *clkset_spi_mmc_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_fin_epll, - &clk_27m, -}; - -static struct clksrc_sources clkset_spi_mmc = { - .sources = clkset_spi_mmc_list, - .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list), -}; - -static struct clk *clkset_irda_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - NULL, - &clk_27m, -}; - -static struct clksrc_sources clkset_irda = { - .sources = clkset_irda_list, - .nr_sources = ARRAY_SIZE(clkset_irda_list), -}; - -static struct clk *clkset_uart_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - NULL, - NULL -}; - -static struct clksrc_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), -}; - -static struct clk *clkset_uhost_list[] = { - &clk_48m, - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_fin_epll, -}; - -static struct clksrc_sources clkset_uhost = { - .sources = clkset_uhost_list, - .nr_sources = ARRAY_SIZE(clkset_uhost_list), -}; - -/* The peripheral clocks are all controlled via clocksource followed - * by an optional divider and gate stage. We currently roll this into - * one clock which hides the intermediate clock from the mux. - * - * Note, the JPEG clock can only be an even divider... - * - * The scaler and LCD clocks depend on the S3C64XX version, and also - * have a common parent divisor so are not included here. - */ - -/* clocks that feed other parts of the clock source tree */ - -static struct clk clk_iis_cd0 = { - .name = "iis_cdclk0", -}; - -static struct clk clk_iis_cd1 = { - .name = "iis_cdclk1", -}; - -static struct clk clk_iisv4_cd = { - .name = "iis_cdclk_v4", -}; - -static struct clk clk_pcm_cd = { - .name = "pcm_cdclk", -}; - -static struct clk *clkset_audio0_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_dout_mpll, - [2] = &clk_fin_epll, - [3] = &clk_iis_cd0, - [4] = &clk_pcm_cd, -}; - -static struct clksrc_sources clkset_audio0 = { - .sources = clkset_audio0_list, - .nr_sources = ARRAY_SIZE(clkset_audio0_list), -}; - -static struct clk *clkset_audio1_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_dout_mpll, - [2] = &clk_fin_epll, - [3] = &clk_iis_cd1, - [4] = &clk_pcm_cd, -}; - -static struct clksrc_sources clkset_audio1 = { - .sources = clkset_audio1_list, - .nr_sources = ARRAY_SIZE(clkset_audio1_list), -}; - -#ifdef CONFIG_CPU_S3C6410 -static struct clk *clkset_audio2_list[] = { - [0] = &clk_mout_epll.clk, - [1] = &clk_dout_mpll, - [2] = &clk_fin_epll, - [3] = &clk_iisv4_cd, - [4] = &clk_pcm_cd, -}; - -static struct clksrc_sources clkset_audio2 = { - .sources = clkset_audio2_list, - .nr_sources = ARRAY_SIZE(clkset_audio2_list), -}; -#endif - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "usb-bus-host", - .ctrlbit = S3C_CLKCON_SCLK_UHOST, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 5, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4 }, - .sources = &clkset_uhost, - }, { - .clk = { - .name = "irda-bus", - .ctrlbit = S3C_CLKCON_SCLK_IRDA, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 24, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4 }, - .sources = &clkset_irda, - }, { - .clk = { - .name = "camera", - .ctrlbit = S3C_CLKCON_SCLK_CAM, - .enable = s3c64xx_sclk_ctrl, - .parent = &clk_h2, - }, - .reg_div = { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4 }, - }, -}; - -/* Where does UCLK0 come from? */ -static struct clksrc_clk clk_sclk_uclk = { - .clk = { - .name = "uclk1", - .ctrlbit = S3C_CLKCON_SCLK_UART, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 }, - .sources = &clkset_uart, -}; - -static struct clksrc_clk clk_sclk_mmc0 = { - .clk = { - .name = "mmc_bus", - .devname = "s3c-sdhci.0", - .ctrlbit = S3C_CLKCON_SCLK_MMC0, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 18, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4 }, - .sources = &clkset_spi_mmc, -}; - -static struct clksrc_clk clk_sclk_mmc1 = { - .clk = { - .name = "mmc_bus", - .devname = "s3c-sdhci.1", - .ctrlbit = S3C_CLKCON_SCLK_MMC1, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 20, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4 }, - .sources = &clkset_spi_mmc, -}; - -static struct clksrc_clk clk_sclk_mmc2 = { - .clk = { - .name = "mmc_bus", - .devname = "s3c-sdhci.2", - .ctrlbit = S3C_CLKCON_SCLK_MMC2, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 22, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4 }, - .sources = &clkset_spi_mmc, -}; - -static struct clksrc_clk clk_sclk_spi0 = { - .clk = { - .name = "spi-bus", - .devname = "s3c6410-spi.0", - .ctrlbit = S3C_CLKCON_SCLK_SPI0, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 }, - .sources = &clkset_spi_mmc, -}; - -static struct clksrc_clk clk_sclk_spi1 = { - .clk = { - .name = "spi-bus", - .devname = "s3c6410-spi.1", - .ctrlbit = S3C_CLKCON_SCLK_SPI1, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 }, - .sources = &clkset_spi_mmc, -}; - -static struct clksrc_clk clk_audio_bus0 = { - .clk = { - .name = "audio-bus", - .devname = "samsung-i2s.0", - .ctrlbit = S3C_CLKCON_SCLK_AUDIO0, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 7, .size = 3 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4 }, - .sources = &clkset_audio0, -}; - -static struct clksrc_clk clk_audio_bus1 = { - .clk = { - .name = "audio-bus", - .devname = "samsung-i2s.1", - .ctrlbit = S3C_CLKCON_SCLK_AUDIO1, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C_CLK_SRC, .shift = 10, .size = 3 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4 }, - .sources = &clkset_audio1, -}; - -#ifdef CONFIG_CPU_S3C6410 -static struct clksrc_clk clk_audio_bus2 = { - .clk = { - .name = "audio-bus", - .devname = "samsung-i2s.2", - .ctrlbit = S3C6410_CLKCON_SCLK_AUDIO2, - .enable = s3c64xx_sclk_ctrl, - }, - .reg_src = { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3 }, - .reg_div = { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4 }, - .sources = &clkset_audio2, -}; -#endif -/* Clock initialisation code */ - -static struct clksrc_clk *init_parents[] = { - &clk_mout_apll, - &clk_mout_epll, - &clk_mout_mpll, -}; - -static struct clksrc_clk *clksrc_cdev[] = { - &clk_sclk_uclk, - &clk_sclk_mmc0, - &clk_sclk_mmc1, - &clk_sclk_mmc2, - &clk_sclk_spi0, - &clk_sclk_spi1, - &clk_audio_bus0, - &clk_audio_bus1, -}; - -static struct clk *clk_cdev[] = { - &clk_hsmmc0, - &clk_hsmmc1, - &clk_hsmmc2, - &clk_48m_spi0, - &clk_48m_spi1, - &clk_i2s0, - &clk_i2s1, -}; - -static struct clk_lookup s3c64xx_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk), - CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), - CLKDEV_INIT("s3c6410-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), - CLKDEV_INIT("s3c6410-spi.0", "spi_busclk2", &clk_48m_spi0), - CLKDEV_INIT("s3c6410-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), - CLKDEV_INIT("s3c6410-spi.1", "spi_busclk2", &clk_48m_spi1), - CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0), - CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_audio_bus0.clk), - CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1), - CLKDEV_INIT("samsung-i2s.1", "i2s_opclk1", &clk_audio_bus1.clk), -#ifdef CONFIG_CPU_S3C6410 - CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2), - CLKDEV_INIT("samsung-i2s.2", "i2s_opclk1", &clk_audio_bus2.clk), -#endif -}; - -#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) - -void __init_or_cpufreq s3c64xx_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long hclk2; - unsigned long pclk; - unsigned long epll; - unsigned long apll; - unsigned long mpll; - unsigned int ptr; - u32 clkdiv0; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - clkdiv0 = __raw_readl(S3C_CLK_DIV0); - printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0); - - xtal_clk = clk_get(NULL, "xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - /* For now assume the mux always selects the crystal */ - clk_ext_xtal_mux.parent = xtal_clk; - - epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0), - __raw_readl(S3C_EPLL_CON1)); - mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON)); - apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON)); - - fclk = mpll; - - printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n", - apll, mpll, epll); - - if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL) - /* Synchronous mode */ - hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); - else - /* Asynchronous mode */ - hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); - - hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK); - pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK); - - printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n", - hclk2, hclk, pclk); - - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - clk_fout_apll.rate = apll; - - clk_h2.rate = hclk2; - clk_h.rate = hclk; - clk_p.rate = pclk; - clk_f.rate = fclk; - - for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) - s3c_set_clksrc(init_parents[ptr], true); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); -} - -static struct clk *clks1[] __initdata = { - &clk_ext_xtal_mux, - &clk_iis_cd0, - &clk_iis_cd1, - &clk_iisv4_cd, - &clk_pcm_cd, - &clk_mout_epll.clk, - &clk_mout_mpll.clk, - &clk_dout_mpll, - &clk_arm, -}; - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_epll, - &clk_27m, - &clk_48m, - &clk_h2, - &clk_xusbxti, -}; - -/** - * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410 - * @xtal: The rate for the clock crystal feeding the PLLs. - * @armclk_divlimit: Divisor mask for ARMCLK. - * - * Register the clocks for the S3C6400 and S3C6410 SoC range, such - * as ARMCLK as well as the necessary parent clocks. - * - * This call does not setup the clocks, which is left to the - * s3c64xx_setup_clocks() call which may be needed by the cpufreq - * or resume code to re-set the clocks if the bootloader has changed - * them. - */ -void __init s3c64xx_register_clocks(unsigned long xtal, - unsigned armclk_divlimit) -{ - unsigned int cnt; - - armclk_mask = armclk_divlimit; - - s3c24xx_register_baseclocks(xtal); - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - - s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev)); - for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++) - s3c_disable_clocks(clk_cdev[cnt], 1); - - s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1)); - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++) - s3c_register_clksrc(clksrc_cdev[cnt], 1); - clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup)); -} diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 73d79cf5e141..7a3ce4c39e5f 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -14,9 +14,14 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used when booting with Device Tree support. + */ + #include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> +#include <linux/clk-provider.h> #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/serial_core.h> @@ -38,7 +43,6 @@ #include <mach/regs-gpio.h> #include <plat/cpu.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/pm.h> #include <plat/gpio-cfg.h> @@ -50,6 +54,19 @@ #include "common.h" +/* External clock frequency */ +static unsigned long xtal_f = 12000000, xusbxti_f = 48000000; + +void __init s3c64xx_set_xtal_freq(unsigned long freq) +{ + xtal_f = freq; +} + +void __init s3c64xx_set_xusbxti_freq(unsigned long freq) +{ + xusbxti_f = freq; +} + /* uart registration process */ static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) @@ -67,7 +84,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = S3C6400_CPU_ID, .idmask = S3C64XX_CPU_MASK, .map_io = s3c6400_map_io, - .init_clocks = s3c6400_init_clocks, .init_uarts = s3c64xx_init_uarts, .init = s3c6400_init, .name = name_s3c6400, @@ -75,7 +91,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = S3C6410_CPU_ID, .idmask = S3C64XX_CPU_MASK, .map_io = s3c6410_map_io, - .init_clocks = s3c6410_init_clocks, .init_uarts = s3c64xx_init_uarts, .init = s3c6410_init, .name = name_s3c6410, @@ -192,6 +207,10 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) static __init int s3c64xx_dev_init(void) { + /* Not applicable when using DT. */ + if (of_have_populated_dt()) + return 0; + subsys_system_register(&s3c64xx_subsys, NULL); return device_register(&s3c64xx_dev); } @@ -213,8 +232,10 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid) { /* * FIXME: there is no better place to put this at the moment - * (samsung_wdt_reset_init needs clocks) + * (s3c64xx_clk_init needs ioremap and must happen before init_time + * samsung_wdt_reset_init needs clocks) */ + s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS); samsung_wdt_reset_init(S3C_VA_WATCHDOG); printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); @@ -391,6 +412,10 @@ static int __init s3c64xx_init_irq_eint(void) { int irq; + /* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */ + if (of_have_populated_dt()) + return -ENODEV; + for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) { irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq); irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq)); diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h index e8f990b37665..7043e7a3a67e 100644 --- a/arch/arm/mach-s3c64xx/common.h +++ b/arch/arm/mach-s3c64xx/common.h @@ -22,21 +22,21 @@ void s3c64xx_init_irq(u32 vic0, u32 vic1); void s3c64xx_init_io(struct map_desc *mach_desc, int size); -void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit); -void s3c64xx_setup_clocks(void); - void s3c64xx_restart(enum reboot_mode mode, const char *cmd); void s3c64xx_init_late(void); +void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f, + unsigned long xusbxti_f, bool is_s3c6400, void __iomem *reg_base); +void s3c64xx_set_xtal_freq(unsigned long freq); +void s3c64xx_set_xusbxti_freq(unsigned long freq); + #ifdef CONFIG_CPU_S3C6400 extern int s3c6400_init(void); extern void s3c6400_init_irq(void); extern void s3c6400_map_io(void); -extern void s3c6400_init_clocks(int xtal); #else -#define s3c6400_init_clocks NULL #define s3c6400_map_io NULL #define s3c6400_init NULL #endif @@ -46,10 +46,8 @@ extern void s3c6400_init_clocks(int xtal); extern int s3c6410_init(void); extern void s3c6410_init_irq(void); extern void s3c6410_map_io(void); -extern void s3c6410_init_clocks(int xtal); #else -#define s3c6410_init_clocks NULL #define s3c6410_map_io NULL #define s3c6410_init NULL #endif @@ -60,4 +58,9 @@ int __init s3c64xx_pm_late_initcall(void); static inline int s3c64xx_pm_late_initcall(void) { return 0; } #endif +#ifdef CONFIG_S3C64XX_PL080 +extern struct pl08x_platform_data s3c64xx_dma0_plat_data; +extern struct pl08x_platform_data s3c64xx_dma1_plat_data; +#endif + #endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */ diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c deleted file mode 100644 index 759846c28d12..000000000000 --- a/arch/arm/mach-s3c64xx/dma.c +++ /dev/null @@ -1,753 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/dma.c - * - * Copyright 2009 Openmoko, Inc. - * Copyright 2009 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX DMA core - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/dmapool.h> -#include <linux/device.h> -#include <linux/errno.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/amba/pl080.h> - -#include <mach/dma.h> -#include <mach/map.h> -#include <mach/irqs.h> - -#include "regs-sys.h" - -/* dma channel state information */ - -struct s3c64xx_dmac { - struct device dev; - struct clk *clk; - void __iomem *regs; - struct s3c2410_dma_chan *channels; - enum dma_ch chanbase; -}; - -/* pool to provide LLI buffers */ -static struct dma_pool *dma_pool; - -/* Debug configuration and code */ - -static unsigned char debug_show_buffs = 0; - -static void dbg_showchan(struct s3c2410_dma_chan *chan) -{ - pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n", - chan->number, - readl(chan->regs + PL080_CH_SRC_ADDR), - readl(chan->regs + PL080_CH_DST_ADDR), - readl(chan->regs + PL080_CH_LLI), - readl(chan->regs + PL080_CH_CONTROL), - readl(chan->regs + PL080S_CH_CONTROL2), - readl(chan->regs + PL080S_CH_CONFIG)); -} - -static void show_lli(struct pl080s_lli *lli) -{ - pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n", - lli, lli->src_addr, lli->dst_addr, lli->next_lli, - lli->control0, lli->control1); -} - -static void dbg_showbuffs(struct s3c2410_dma_chan *chan) -{ - struct s3c64xx_dma_buff *ptr; - struct s3c64xx_dma_buff *end; - - pr_debug("DMA%d: buffs next %p, curr %p, end %p\n", - chan->number, chan->next, chan->curr, chan->end); - - ptr = chan->next; - end = chan->end; - - if (debug_show_buffs) { - for (; ptr != NULL; ptr = ptr->next) { - pr_debug("DMA%d: %08x ", - chan->number, ptr->lli_dma); - show_lli(ptr->lli); - } - } -} - -/* End of Debug */ - -static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel) -{ - struct s3c2410_dma_chan *chan; - unsigned int start, offs; - - start = 0; - - if (channel >= DMACH_PCM1_TX) - start = 8; - - for (offs = 0; offs < 8; offs++) { - chan = &s3c2410_chans[start + offs]; - if (!chan->in_use) - goto found; - } - - return NULL; - -found: - s3c_dma_chan_map[channel] = chan; - return chan; -} - -int s3c2410_dma_config(enum dma_ch channel, int xferunit) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - - if (chan == NULL) - return -EINVAL; - - switch (xferunit) { - case 1: - chan->hw_width = 0; - break; - case 2: - chan->hw_width = 1; - break; - case 4: - chan->hw_width = 2; - break; - default: - printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit); - return -EINVAL; - } - - return 0; -} -EXPORT_SYMBOL(s3c2410_dma_config); - -static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan, - struct pl080s_lli *lli, - dma_addr_t data, int size) -{ - dma_addr_t src, dst; - u32 control0, control1; - - switch (chan->source) { - case DMA_FROM_DEVICE: - src = chan->dev_addr; - dst = data; - control0 = PL080_CONTROL_SRC_AHB2; - control0 |= PL080_CONTROL_DST_INCR; - break; - - case DMA_TO_DEVICE: - src = data; - dst = chan->dev_addr; - control0 = PL080_CONTROL_DST_AHB2; - control0 |= PL080_CONTROL_SRC_INCR; - break; - default: - BUG(); - } - - /* note, we do not currently setup any of the burst controls */ - - control1 = size >> chan->hw_width; /* size in no of xfers */ - control0 |= PL080_CONTROL_PROT_SYS; /* always in priv. mode */ - control0 |= PL080_CONTROL_TC_IRQ_EN; /* always fire IRQ */ - control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT; - control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT; - - lli->src_addr = src; - lli->dst_addr = dst; - lli->next_lli = 0; - lli->control0 = control0; - lli->control1 = control1; -} - -static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan, - struct pl080s_lli *lli) -{ - void __iomem *regs = chan->regs; - - pr_debug("%s: LLI %p => regs\n", __func__, lli); - show_lli(lli); - - writel(lli->src_addr, regs + PL080_CH_SRC_ADDR); - writel(lli->dst_addr, regs + PL080_CH_DST_ADDR); - writel(lli->next_lli, regs + PL080_CH_LLI); - writel(lli->control0, regs + PL080_CH_CONTROL); - writel(lli->control1, regs + PL080S_CH_CONTROL2); -} - -static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan) -{ - struct s3c64xx_dmac *dmac = chan->dmac; - u32 config; - u32 bit = chan->bit; - - dbg_showchan(chan); - - pr_debug("%s: clearing interrupts\n", __func__); - - /* clear interrupts */ - writel(bit, dmac->regs + PL080_TC_CLEAR); - writel(bit, dmac->regs + PL080_ERR_CLEAR); - - pr_debug("%s: starting channel\n", __func__); - - config = readl(chan->regs + PL080S_CH_CONFIG); - config |= PL080_CONFIG_ENABLE; - config &= ~PL080_CONFIG_HALT; - - pr_debug("%s: writing config %08x\n", __func__, config); - writel(config, chan->regs + PL080S_CH_CONFIG); - - return 0; -} - -static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan) -{ - u32 config; - int timeout; - - pr_debug("%s: stopping channel\n", __func__); - - dbg_showchan(chan); - - config = readl(chan->regs + PL080S_CH_CONFIG); - config |= PL080_CONFIG_HALT; - writel(config, chan->regs + PL080S_CH_CONFIG); - - timeout = 1000; - do { - config = readl(chan->regs + PL080S_CH_CONFIG); - pr_debug("%s: %d - config %08x\n", __func__, timeout, config); - if (config & PL080_CONFIG_ACTIVE) - udelay(10); - else - break; - } while (--timeout > 0); - - if (config & PL080_CONFIG_ACTIVE) { - printk(KERN_ERR "%s: channel still active\n", __func__); - return -EFAULT; - } - - config = readl(chan->regs + PL080S_CH_CONFIG); - config &= ~PL080_CONFIG_ENABLE; - writel(config, chan->regs + PL080S_CH_CONFIG); - - return 0; -} - -static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan, - struct s3c64xx_dma_buff *buf, - enum s3c2410_dma_buffresult result) -{ - if (chan->callback_fn != NULL) - (chan->callback_fn)(chan, buf->pw, 0, result); -} - -static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff) -{ - dma_pool_free(dma_pool, buff->lli, buff->lli_dma); - kfree(buff); -} - -static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan) -{ - struct s3c64xx_dma_buff *buff, *next; - u32 config; - - dbg_showchan(chan); - - pr_debug("%s: flushing channel\n", __func__); - - config = readl(chan->regs + PL080S_CH_CONFIG); - config &= ~PL080_CONFIG_ENABLE; - writel(config, chan->regs + PL080S_CH_CONFIG); - - /* dump all the buffers associated with this channel */ - - for (buff = chan->curr; buff != NULL; buff = next) { - next = buff->next; - pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next); - - s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT); - s3c64xx_dma_freebuff(buff); - } - - chan->curr = chan->next = chan->end = NULL; - - return 0; -} - -int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - - WARN_ON(!chan); - if (!chan) - return -EINVAL; - - switch (op) { - case S3C2410_DMAOP_START: - return s3c64xx_dma_start(chan); - - case S3C2410_DMAOP_STOP: - return s3c64xx_dma_stop(chan); - - case S3C2410_DMAOP_FLUSH: - return s3c64xx_dma_flush(chan); - - /* believe PAUSE/RESUME are no-ops */ - case S3C2410_DMAOP_PAUSE: - case S3C2410_DMAOP_RESUME: - case S3C2410_DMAOP_STARTED: - case S3C2410_DMAOP_TIMEOUT: - return 0; - } - - return -ENOENT; -} -EXPORT_SYMBOL(s3c2410_dma_ctrl); - -/* s3c2410_dma_enque - * - */ - -int s3c2410_dma_enqueue(enum dma_ch channel, void *id, - dma_addr_t data, int size) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - struct s3c64xx_dma_buff *next; - struct s3c64xx_dma_buff *buff; - struct pl080s_lli *lli; - unsigned long flags; - int ret; - - WARN_ON(!chan); - if (!chan) - return -EINVAL; - - buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC); - if (!buff) { - printk(KERN_ERR "%s: no memory for buffer\n", __func__); - return -ENOMEM; - } - - lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma); - if (!lli) { - printk(KERN_ERR "%s: no memory for lli\n", __func__); - ret = -ENOMEM; - goto err_buff; - } - - pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n", - __func__, buff, data, lli, (u32)buff->lli_dma, size); - - buff->lli = lli; - buff->pw = id; - - s3c64xx_dma_fill_lli(chan, lli, data, size); - - local_irq_save(flags); - - if ((next = chan->next) != NULL) { - struct s3c64xx_dma_buff *end = chan->end; - struct pl080s_lli *endlli = end->lli; - - pr_debug("enquing onto channel\n"); - - end->next = buff; - endlli->next_lli = buff->lli_dma; - - if (chan->flags & S3C2410_DMAF_CIRCULAR) { - struct s3c64xx_dma_buff *curr = chan->curr; - lli->next_lli = curr->lli_dma; - } - - if (next == chan->curr) { - writel(buff->lli_dma, chan->regs + PL080_CH_LLI); - chan->next = buff; - } - - show_lli(endlli); - chan->end = buff; - } else { - pr_debug("enquing onto empty channel\n"); - - chan->curr = buff; - chan->next = buff; - chan->end = buff; - - s3c64xx_lli_to_regs(chan, lli); - } - - local_irq_restore(flags); - - show_lli(lli); - - dbg_showchan(chan); - dbg_showbuffs(chan); - return 0; - -err_buff: - kfree(buff); - return ret; -} - -EXPORT_SYMBOL(s3c2410_dma_enqueue); - - -int s3c2410_dma_devconfig(enum dma_ch channel, - enum dma_data_direction source, - unsigned long devaddr) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - u32 peripheral; - u32 config = 0; - - pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n", - __func__, channel, source, devaddr, chan); - - WARN_ON(!chan); - if (!chan) - return -EINVAL; - - peripheral = (chan->peripheral & 0xf); - chan->source = source; - chan->dev_addr = devaddr; - - pr_debug("%s: peripheral %d\n", __func__, peripheral); - - switch (source) { - case DMA_FROM_DEVICE: - config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT; - config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT; - break; - case DMA_TO_DEVICE: - config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT; - config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT; - break; - default: - printk(KERN_ERR "%s: bad source\n", __func__); - return -EINVAL; - } - - /* allow TC and ERR interrupts */ - config |= PL080_CONFIG_TC_IRQ_MASK; - config |= PL080_CONFIG_ERR_IRQ_MASK; - - pr_debug("%s: config %08x\n", __func__, config); - - writel(config, chan->regs + PL080S_CH_CONFIG); - - return 0; -} -EXPORT_SYMBOL(s3c2410_dma_devconfig); - - -int s3c2410_dma_getposition(enum dma_ch channel, - dma_addr_t *src, dma_addr_t *dst) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - - WARN_ON(!chan); - if (!chan) - return -EINVAL; - - if (src != NULL) - *src = readl(chan->regs + PL080_CH_SRC_ADDR); - - if (dst != NULL) - *dst = readl(chan->regs + PL080_CH_DST_ADDR); - - return 0; -} -EXPORT_SYMBOL(s3c2410_dma_getposition); - -/* s3c2410_request_dma - * - * get control of an dma channel -*/ - -int s3c2410_dma_request(enum dma_ch channel, - struct s3c2410_dma_client *client, - void *dev) -{ - struct s3c2410_dma_chan *chan; - unsigned long flags; - - pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n", - channel, client->name, dev); - - local_irq_save(flags); - - chan = s3c64xx_dma_map_channel(channel); - if (chan == NULL) { - local_irq_restore(flags); - return -EBUSY; - } - - dbg_showchan(chan); - - chan->client = client; - chan->in_use = 1; - chan->peripheral = channel; - chan->flags = 0; - - local_irq_restore(flags); - - /* need to setup */ - - pr_debug("%s: channel initialised, %p\n", __func__, chan); - - return chan->number | DMACH_LOW_LEVEL; -} - -EXPORT_SYMBOL(s3c2410_dma_request); - -/* s3c2410_dma_free - * - * release the given channel back to the system, will stop and flush - * any outstanding transfers, and ensure the channel is ready for the - * next claimant. - * - * Note, although a warning is currently printed if the freeing client - * info is not the same as the registrant's client info, the free is still - * allowed to go through. -*/ - -int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - unsigned long flags; - - if (chan == NULL) - return -EINVAL; - - local_irq_save(flags); - - if (chan->client != client) { - printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n", - channel, chan->client, client); - } - - /* sort out stopping and freeing the channel */ - - - chan->client = NULL; - chan->in_use = 0; - - if (!(channel & DMACH_LOW_LEVEL)) - s3c_dma_chan_map[channel] = NULL; - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_free); - -static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) -{ - struct s3c64xx_dmac *dmac = pw; - struct s3c2410_dma_chan *chan; - enum s3c2410_dma_buffresult res; - u32 tcstat, errstat; - u32 bit; - int offs; - - tcstat = readl(dmac->regs + PL080_TC_STATUS); - errstat = readl(dmac->regs + PL080_ERR_STATUS); - - for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) { - struct s3c64xx_dma_buff *buff; - - if (!(errstat & bit) && !(tcstat & bit)) - continue; - - chan = dmac->channels + offs; - res = S3C2410_RES_ERR; - - if (tcstat & bit) { - writel(bit, dmac->regs + PL080_TC_CLEAR); - res = S3C2410_RES_OK; - } - - if (errstat & bit) - writel(bit, dmac->regs + PL080_ERR_CLEAR); - - /* 'next' points to the buffer that is next to the - * currently active buffer. - * For CIRCULAR queues, 'next' will be same as 'curr' - * when 'end' is the active buffer. - */ - buff = chan->curr; - while (buff && buff != chan->next - && buff->next != chan->next) - buff = buff->next; - - if (!buff) - BUG(); - - if (buff == chan->next) - buff = chan->end; - - s3c64xx_dma_bufffdone(chan, buff, res); - - /* Free the node and update curr, if non-circular queue */ - if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) { - chan->curr = buff->next; - s3c64xx_dma_freebuff(buff); - } - - /* Update 'next' */ - buff = chan->next; - if (chan->next == chan->end) { - chan->next = chan->curr; - if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) - chan->end = NULL; - } else { - chan->next = buff->next; - } - } - - return IRQ_HANDLED; -} - -static struct bus_type dma_subsys = { - .name = "s3c64xx-dma", - .dev_name = "s3c64xx-dma", -}; - -static int s3c64xx_dma_init1(int chno, enum dma_ch chbase, - int irq, unsigned int base) -{ - struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno]; - struct s3c64xx_dmac *dmac; - char clkname[16]; - void __iomem *regs; - void __iomem *regptr; - int err, ch; - - dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL); - if (!dmac) { - printk(KERN_ERR "%s: failed to alloc mem\n", __func__); - return -ENOMEM; - } - - dmac->dev.id = chno / 8; - dmac->dev.bus = &dma_subsys; - - err = device_register(&dmac->dev); - if (err) { - printk(KERN_ERR "%s: failed to register device\n", __func__); - goto err_alloc; - } - - regs = ioremap(base, 0x200); - if (!regs) { - printk(KERN_ERR "%s: failed to ioremap()\n", __func__); - err = -ENXIO; - goto err_dev; - } - - snprintf(clkname, sizeof(clkname), "dma%d", dmac->dev.id); - - dmac->clk = clk_get(NULL, clkname); - if (IS_ERR(dmac->clk)) { - printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname); - err = PTR_ERR(dmac->clk); - goto err_map; - } - - clk_enable(dmac->clk); - - dmac->regs = regs; - dmac->chanbase = chbase; - dmac->channels = chptr; - - err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac); - if (err < 0) { - printk(KERN_ERR "%s: failed to get irq\n", __func__); - goto err_clk; - } - - regptr = regs + PL080_Cx_BASE(0); - - for (ch = 0; ch < 8; ch++, chptr++) { - pr_debug("%s: registering DMA %d (%p)\n", - __func__, chno + ch, regptr); - - chptr->bit = 1 << ch; - chptr->number = chno + ch; - chptr->dmac = dmac; - chptr->regs = regptr; - regptr += PL080_Cx_STRIDE; - } - - /* for the moment, permanently enable the controller */ - writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG); - - printk(KERN_INFO "PL080: IRQ %d, at %p, channels %d..%d\n", - irq, regs, chno, chno+8); - - return 0; - -err_clk: - clk_disable(dmac->clk); - clk_put(dmac->clk); -err_map: - iounmap(regs); -err_dev: - device_unregister(&dmac->dev); -err_alloc: - kfree(dmac); - return err; -} - -static int __init s3c64xx_dma_init(void) -{ - int ret; - - printk(KERN_INFO "%s: Registering DMA channels\n", __func__); - - dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0); - if (!dma_pool) { - printk(KERN_ERR "%s: failed to create pool\n", __func__); - return -ENOMEM; - } - - ret = subsys_system_register(&dma_subsys, NULL); - if (ret) { - printk(KERN_ERR "%s: failed to create subsys\n", __func__); - return -ENOMEM; - } - - /* Set all DMA configuration to be DMA, not SDMA */ - writel(0xffffff, S3C64XX_SDMA_SEL); - - /* Register standard DMA controllers */ - s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000); - s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000); - - return 0; -} - -arch_initcall(s3c64xx_dma_init); diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h index fe1a98cf0e4c..059b1fc85037 100644 --- a/arch/arm/mach-s3c64xx/include/mach/dma.h +++ b/arch/arm/mach-s3c64xx/include/mach/dma.h @@ -11,51 +11,48 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H __FILE__ -#define S3C_DMA_CHANNELS (16) +#define S3C64XX_DMA_CHAN(name) ((unsigned long)(name)) + +/* DMA0/SDMA0 */ +#define DMACH_UART0 S3C64XX_DMA_CHAN("uart0_tx") +#define DMACH_UART0_SRC2 S3C64XX_DMA_CHAN("uart0_rx") +#define DMACH_UART1 S3C64XX_DMA_CHAN("uart1_tx") +#define DMACH_UART1_SRC2 S3C64XX_DMA_CHAN("uart1_rx") +#define DMACH_UART2 S3C64XX_DMA_CHAN("uart2_tx") +#define DMACH_UART2_SRC2 S3C64XX_DMA_CHAN("uart2_rx") +#define DMACH_UART3 S3C64XX_DMA_CHAN("uart3_tx") +#define DMACH_UART3_SRC2 S3C64XX_DMA_CHAN("uart3_rx") +#define DMACH_PCM0_TX S3C64XX_DMA_CHAN("pcm0_tx") +#define DMACH_PCM0_RX S3C64XX_DMA_CHAN("pcm0_rx") +#define DMACH_I2S0_OUT S3C64XX_DMA_CHAN("i2s0_tx") +#define DMACH_I2S0_IN S3C64XX_DMA_CHAN("i2s0_rx") +#define DMACH_SPI0_TX S3C64XX_DMA_CHAN("spi0_tx") +#define DMACH_SPI0_RX S3C64XX_DMA_CHAN("spi0_rx") +#define DMACH_HSI_I2SV40_TX S3C64XX_DMA_CHAN("i2s2_tx") +#define DMACH_HSI_I2SV40_RX S3C64XX_DMA_CHAN("i2s2_rx") + +/* DMA1/SDMA1 */ +#define DMACH_PCM1_TX S3C64XX_DMA_CHAN("pcm1_tx") +#define DMACH_PCM1_RX S3C64XX_DMA_CHAN("pcm1_rx") +#define DMACH_I2S1_OUT S3C64XX_DMA_CHAN("i2s1_tx") +#define DMACH_I2S1_IN S3C64XX_DMA_CHAN("i2s1_rx") +#define DMACH_SPI1_TX S3C64XX_DMA_CHAN("spi1_tx") +#define DMACH_SPI1_RX S3C64XX_DMA_CHAN("spi1_rx") +#define DMACH_AC97_PCMOUT S3C64XX_DMA_CHAN("ac97_out") +#define DMACH_AC97_PCMIN S3C64XX_DMA_CHAN("ac97_in") +#define DMACH_AC97_MICIN S3C64XX_DMA_CHAN("ac97_mic") +#define DMACH_PWM S3C64XX_DMA_CHAN("pwm") +#define DMACH_IRDA S3C64XX_DMA_CHAN("irda") +#define DMACH_EXTERNAL S3C64XX_DMA_CHAN("external") +#define DMACH_SECURITY_RX S3C64XX_DMA_CHAN("sec_rx") +#define DMACH_SECURITY_TX S3C64XX_DMA_CHAN("sec_tx") -/* see mach-s3c2410/dma.h for notes on dma channel numbers */ - -/* Note, for the S3C64XX architecture we keep the DMACH_ - * defines in the order they are allocated to [S]DMA0/[S]DMA1 - * so that is easy to do DHACH_ -> DMA controller conversion - */ enum dma_ch { - /* DMA0/SDMA0 */ - DMACH_UART0 = 0, - DMACH_UART0_SRC2, - DMACH_UART1, - DMACH_UART1_SRC2, - DMACH_UART2, - DMACH_UART2_SRC2, - DMACH_UART3, - DMACH_UART3_SRC2, - DMACH_PCM0_TX, - DMACH_PCM0_RX, - DMACH_I2S0_OUT, - DMACH_I2S0_IN, - DMACH_SPI0_TX, - DMACH_SPI0_RX, - DMACH_HSI_I2SV40_TX, - DMACH_HSI_I2SV40_RX, + DMACH_MAX = 32 +}; - /* DMA1/SDMA1 */ - DMACH_PCM1_TX = 16, - DMACH_PCM1_RX, - DMACH_I2S1_OUT, - DMACH_I2S1_IN, - DMACH_SPI1_TX, - DMACH_SPI1_RX, - DMACH_AC97_PCMOUT, - DMACH_AC97_PCMIN, - DMACH_AC97_MICIN, - DMACH_PWM, - DMACH_IRDA, - DMACH_EXTERNAL, - DMACH_RES1, - DMACH_RES2, - DMACH_SECURITY_RX, /* SDMA1 only */ - DMACH_SECURITY_TX, /* SDMA1 only */ - DMACH_MAX /* the end */ +struct s3c2410_dma_client { + char *name; }; static inline bool samsung_dma_has_circular(void) @@ -65,67 +62,10 @@ static inline bool samsung_dma_has_circular(void) static inline bool samsung_dma_is_dmadev(void) { - return false; + return true; } -#define S3C2410_DMAF_CIRCULAR (1 << 0) - -#include <plat/dma.h> - -#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ - -struct s3c64xx_dma_buff; - -/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor - * @next: Pointer to next buffer in queue or ring. - * @pw: Client provided identifier - * @lli: Pointer to hardware descriptor this buffer is associated with. - * @lli_dma: Hardare address of the descriptor. - */ -struct s3c64xx_dma_buff { - struct s3c64xx_dma_buff *next; - - void *pw; - struct pl080s_lli *lli; - dma_addr_t lli_dma; -}; - -struct s3c64xx_dmac; - -struct s3c2410_dma_chan { - unsigned char number; /* number of this dma channel */ - unsigned char in_use; /* channel allocated */ - unsigned char bit; /* bit for enable/disable/etc */ - unsigned char hw_width; - unsigned char peripheral; - - unsigned int flags; - enum dma_data_direction source; - - - dma_addr_t dev_addr; - - struct s3c2410_dma_client *client; - struct s3c64xx_dmac *dmac; /* pointer to controller */ - - void __iomem *regs; - - /* cdriver callbacks */ - s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */ - s3c2410_dma_opfn_t op_fn; /* channel op callback */ - - /* buffer list and information */ - struct s3c64xx_dma_buff *curr; /* current dma buffer */ - struct s3c64xx_dma_buff *next; /* next buffer to load */ - struct s3c64xx_dma_buff *end; /* end of queue */ - - /* note, when channel is running in circular mode, curr is the - * first buffer enqueued, end is the last and curr is where the - * last buffer-done event is set-at. The buffers are not freed - * and the last buffer hardware descriptor points back to the - * first. - */ -}; -#include <plat/dma-core.h> +#include <linux/amba/pl08x.h> +#include <plat/dma-ops.h> #endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h index 05332b998ec0..4f44aac77092 100644 --- a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h @@ -15,145 +15,21 @@ #ifndef __PLAT_REGS_CLOCK_H #define __PLAT_REGS_CLOCK_H __FILE__ +/* + * FIXME: Remove remaining definitions + */ + #define S3C_CLKREG(x) (S3C_VA_SYS + (x)) -#define S3C_APLL_LOCK S3C_CLKREG(0x00) -#define S3C_MPLL_LOCK S3C_CLKREG(0x04) -#define S3C_EPLL_LOCK S3C_CLKREG(0x08) -#define S3C_APLL_CON S3C_CLKREG(0x0C) -#define S3C_MPLL_CON S3C_CLKREG(0x10) -#define S3C_EPLL_CON0 S3C_CLKREG(0x14) -#define S3C_EPLL_CON1 S3C_CLKREG(0x18) -#define S3C_CLK_SRC S3C_CLKREG(0x1C) -#define S3C_CLK_DIV0 S3C_CLKREG(0x20) -#define S3C_CLK_DIV1 S3C_CLKREG(0x24) -#define S3C_CLK_DIV2 S3C_CLKREG(0x28) -#define S3C_CLK_OUT S3C_CLKREG(0x2C) -#define S3C_HCLK_GATE S3C_CLKREG(0x30) #define S3C_PCLK_GATE S3C_CLKREG(0x34) -#define S3C_SCLK_GATE S3C_CLKREG(0x38) -#define S3C_MEM0_GATE S3C_CLKREG(0x3C) #define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C) #define S3C_MEM_SYS_CFG S3C_CLKREG(0x120) -/* CLKDIV0 */ -#define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12) -#define S3C6400_CLKDIV0_PCLK_SHIFT (12) -#define S3C6400_CLKDIV0_HCLK2_MASK (0x7 << 9) -#define S3C6400_CLKDIV0_HCLK2_SHIFT (9) -#define S3C6400_CLKDIV0_HCLK_MASK (0x1 << 8) -#define S3C6400_CLKDIV0_HCLK_SHIFT (8) -#define S3C6400_CLKDIV0_MPLL_MASK (0x1 << 4) -#define S3C6400_CLKDIV0_MPLL_SHIFT (4) - -#define S3C6400_CLKDIV0_ARM_MASK (0x7 << 0) -#define S3C6410_CLKDIV0_ARM_MASK (0xf << 0) -#define S3C6400_CLKDIV0_ARM_SHIFT (0) - -/* HCLK GATE Registers */ -#define S3C_CLKCON_HCLK_3DSE (1<<31) -#define S3C_CLKCON_HCLK_UHOST (1<<29) -#define S3C_CLKCON_HCLK_SECUR (1<<28) -#define S3C_CLKCON_HCLK_SDMA1 (1<<27) -#define S3C_CLKCON_HCLK_SDMA0 (1<<26) -#define S3C_CLKCON_HCLK_IROM (1<<25) -#define S3C_CLKCON_HCLK_DDR1 (1<<24) -#define S3C_CLKCON_HCLK_DDR0 (1<<23) -#define S3C_CLKCON_HCLK_MEM1 (1<<22) -#define S3C_CLKCON_HCLK_MEM0 (1<<21) -#define S3C_CLKCON_HCLK_USB (1<<20) -#define S3C_CLKCON_HCLK_HSMMC2 (1<<19) -#define S3C_CLKCON_HCLK_HSMMC1 (1<<18) -#define S3C_CLKCON_HCLK_HSMMC0 (1<<17) -#define S3C_CLKCON_HCLK_MDP (1<<16) -#define S3C_CLKCON_HCLK_DHOST (1<<15) -#define S3C_CLKCON_HCLK_IHOST (1<<14) -#define S3C_CLKCON_HCLK_DMA1 (1<<13) -#define S3C_CLKCON_HCLK_DMA0 (1<<12) -#define S3C_CLKCON_HCLK_JPEG (1<<11) -#define S3C_CLKCON_HCLK_CAMIF (1<<10) -#define S3C_CLKCON_HCLK_SCALER (1<<9) -#define S3C_CLKCON_HCLK_2D (1<<8) -#define S3C_CLKCON_HCLK_TV (1<<7) -#define S3C_CLKCON_HCLK_POST0 (1<<5) -#define S3C_CLKCON_HCLK_ROT (1<<4) -#define S3C_CLKCON_HCLK_LCD (1<<3) -#define S3C_CLKCON_HCLK_TZIC (1<<2) -#define S3C_CLKCON_HCLK_INTC (1<<1) -#define S3C_CLKCON_HCLK_MFC (1<<0) - /* PCLK GATE Registers */ -#define S3C6410_CLKCON_PCLK_I2C1 (1<<27) -#define S3C6410_CLKCON_PCLK_IIS2 (1<<26) -#define S3C_CLKCON_PCLK_SKEY (1<<24) -#define S3C_CLKCON_PCLK_CHIPID (1<<23) -#define S3C_CLKCON_PCLK_SPI1 (1<<22) -#define S3C_CLKCON_PCLK_SPI0 (1<<21) -#define S3C_CLKCON_PCLK_HSIRX (1<<20) -#define S3C_CLKCON_PCLK_HSITX (1<<19) -#define S3C_CLKCON_PCLK_GPIO (1<<18) -#define S3C_CLKCON_PCLK_IIC (1<<17) -#define S3C_CLKCON_PCLK_IIS1 (1<<16) -#define S3C_CLKCON_PCLK_IIS0 (1<<15) -#define S3C_CLKCON_PCLK_AC97 (1<<14) -#define S3C_CLKCON_PCLK_TZPC (1<<13) -#define S3C_CLKCON_PCLK_TSADC (1<<12) -#define S3C_CLKCON_PCLK_KEYPAD (1<<11) -#define S3C_CLKCON_PCLK_IRDA (1<<10) -#define S3C_CLKCON_PCLK_PCM1 (1<<9) -#define S3C_CLKCON_PCLK_PCM0 (1<<8) -#define S3C_CLKCON_PCLK_PWM (1<<7) -#define S3C_CLKCON_PCLK_RTC (1<<6) -#define S3C_CLKCON_PCLK_WDT (1<<5) #define S3C_CLKCON_PCLK_UART3 (1<<4) #define S3C_CLKCON_PCLK_UART2 (1<<3) #define S3C_CLKCON_PCLK_UART1 (1<<2) #define S3C_CLKCON_PCLK_UART0 (1<<1) -#define S3C_CLKCON_PCLK_MFC (1<<0) - -/* SCLK GATE Registers */ -#define S3C_CLKCON_SCLK_UHOST (1<<30) -#define S3C_CLKCON_SCLK_MMC2_48 (1<<29) -#define S3C_CLKCON_SCLK_MMC1_48 (1<<28) -#define S3C_CLKCON_SCLK_MMC0_48 (1<<27) -#define S3C_CLKCON_SCLK_MMC2 (1<<26) -#define S3C_CLKCON_SCLK_MMC1 (1<<25) -#define S3C_CLKCON_SCLK_MMC0 (1<<24) -#define S3C_CLKCON_SCLK_SPI1_48 (1<<23) -#define S3C_CLKCON_SCLK_SPI0_48 (1<<22) -#define S3C_CLKCON_SCLK_SPI1 (1<<21) -#define S3C_CLKCON_SCLK_SPI0 (1<<20) -#define S3C_CLKCON_SCLK_DAC27 (1<<19) -#define S3C_CLKCON_SCLK_TV27 (1<<18) -#define S3C_CLKCON_SCLK_SCALER27 (1<<17) -#define S3C_CLKCON_SCLK_SCALER (1<<16) -#define S3C_CLKCON_SCLK_LCD27 (1<<15) -#define S3C_CLKCON_SCLK_LCD (1<<14) -#define S3C6400_CLKCON_SCLK_POST1_27 (1<<13) -#define S3C6410_CLKCON_FIMC (1<<13) -#define S3C_CLKCON_SCLK_POST0_27 (1<<12) -#define S3C6400_CLKCON_SCLK_POST1 (1<<11) -#define S3C6410_CLKCON_SCLK_AUDIO2 (1<<11) -#define S3C_CLKCON_SCLK_POST0 (1<<10) -#define S3C_CLKCON_SCLK_AUDIO1 (1<<9) -#define S3C_CLKCON_SCLK_AUDIO0 (1<<8) -#define S3C_CLKCON_SCLK_SECUR (1<<7) -#define S3C_CLKCON_SCLK_IRDA (1<<6) -#define S3C_CLKCON_SCLK_UART (1<<5) -#define S3C_CLKCON_SCLK_ONENAND (1<<4) -#define S3C_CLKCON_SCLK_MFC (1<<3) -#define S3C_CLKCON_SCLK_CAM (1<<2) -#define S3C_CLKCON_SCLK_JPEG (1<<1) - -/* CLKSRC */ - -#define S3C6400_CLKSRC_APLL_MOUT (1 << 0) -#define S3C6400_CLKSRC_MPLL_MOUT (1 << 1) -#define S3C6400_CLKSRC_EPLL_MOUT (1 << 2) -#define S3C6400_CLKSRC_APLL_MOUT_SHIFT (0) -#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT (1) -#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2) -#define S3C6400_CLKSRC_MFC (1 << 4) /* MEM_SYS_CFG */ #define MEM_SYS_CFG_INDEP_CF 0x4000 diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c index c3da1b68d03e..1649c0d1c1b8 100644 --- a/arch/arm/mach-s3c64xx/irq-pm.c +++ b/arch/arm/mach-s3c64xx/irq-pm.c @@ -12,12 +12,17 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used when booting with Device Tree support. + */ + #include <linux/kernel.h> #include <linux/syscore_ops.h> #include <linux/interrupt.h> #include <linux/serial_core.h> #include <linux/irq.h> #include <linux/io.h> +#include <linux/of.h> #include <mach/map.h> @@ -101,6 +106,10 @@ static struct syscore_ops s3c64xx_irq_syscore_ops = { static __init int s3c64xx_syscore_init(void) { + /* Appropriate drivers (pinctrl, uart) handle this when using DT. */ + if (of_have_populated_dt()) + return 0; + register_syscore_ops(&s3c64xx_irq_syscore_ops); return 0; diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index 35e3f54574ef..d266dd5f7060 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -207,7 +207,7 @@ static struct platform_device *anw6410_devices[] __initdata = { static void __init anw6410_map_io(void) { s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index eb8e5a1aca42..758e31b26550 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -114,6 +114,7 @@ static struct platform_pwm_backlight_data crag6410_backlight_data = { .max_brightness = 1000, .dft_brightness = 600, .pwm_period_ns = 100000, /* about 1kHz */ + .enable_gpio = -1, }; static struct platform_device crag6410_backlight_device = { @@ -310,10 +311,6 @@ static struct regulator_consumer_supply wallvdd_consumers[] = { REGULATOR_SUPPLY("SPKVDDL", "spi0.1"), REGULATOR_SUPPLY("SPKVDDR", "spi0.1"), - REGULATOR_SUPPLY("SPKVDDL", "wm5102-codec"), - REGULATOR_SUPPLY("SPKVDDR", "wm5102-codec"), - REGULATOR_SUPPLY("SPKVDDL", "wm5110-codec"), - REGULATOR_SUPPLY("SPKVDDR", "wm5110-codec"), REGULATOR_SUPPLY("DC1VDD", "0-0034"), REGULATOR_SUPPLY("DC2VDD", "0-0034"), @@ -653,14 +650,6 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] = { REGULATOR_SUPPLY("DBVDD3", "spi0.1"), REGULATOR_SUPPLY("LDOVDD", "spi0.1"), REGULATOR_SUPPLY("CPVDD", "spi0.1"), - - REGULATOR_SUPPLY("DBVDD2", "wm5102-codec"), - REGULATOR_SUPPLY("DBVDD3", "wm5102-codec"), - REGULATOR_SUPPLY("CPVDD", "wm5102-codec"), - - REGULATOR_SUPPLY("DBVDD2", "wm5110-codec"), - REGULATOR_SUPPLY("DBVDD3", "wm5110-codec"), - REGULATOR_SUPPLY("CPVDD", "wm5110-codec"), }; static struct regulator_init_data pvdd_1v8 = { @@ -743,7 +732,7 @@ static struct s3c2410_platform_i2c i2c1_pdata = { static void __init crag6410_map_io(void) { s3c64xx_init_io(NULL, 0); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index f39569e0f2e6..614a03a92cf7 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -114,6 +114,7 @@ static struct platform_pwm_backlight_data hmt_backlight_data = { .max_brightness = 100 * 256, .dft_brightness = 40 * 256, .pwm_period_ns = 1000000000 / (100 * 256 * 20), + .enable_gpio = -1, .init = hmt_bl_init, .notify = hmt_bl_notify, .exit = hmt_bl_exit, @@ -247,7 +248,7 @@ static struct platform_device *hmt_devices[] __initdata = { static void __init hmt_map_io(void) { s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index fc043e3ecdf8..58d46a3d7b78 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -231,7 +231,7 @@ static void __init mini6410_map_io(void) u32 tmp; s3c64xx_init_io(NULL, 0); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index 7e2c3908f1f8..2067b0bf55b4 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -86,7 +86,7 @@ static struct map_desc ncp_iodesc[] __initdata = {}; static void __init ncp_map_io(void) { s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } diff --git a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c new file mode 100644 index 000000000000..2fddf38192df --- /dev/null +++ b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c @@ -0,0 +1,76 @@ +/* + * Samsung's S3C64XX flattened device tree enabled machine + * + * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/of_platform.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/system_misc.h> + +#include <plat/cpu.h> +#include <plat/watchdog-reset.h> + +#include <mach/map.h> + +#include "common.h" + +/* + * IO mapping for shared system controller IP. + * + * FIXME: Make remaining drivers use dynamic mapping. + */ +static struct map_desc s3c64xx_dt_iodesc[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_SYS, + .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void __init s3c64xx_dt_map_io(void) +{ + debug_ll_io_init(); + iotable_init(s3c64xx_dt_iodesc, ARRAY_SIZE(s3c64xx_dt_iodesc)); + + s3c64xx_init_cpu(); + + if (!soc_is_s3c64xx()) + panic("SoC is not S3C64xx!"); +} + +static void __init s3c64xx_dt_init_machine(void) +{ + samsung_wdt_reset_of_init(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static void s3c64xx_dt_restart(enum reboot_mode mode, const char *cmd) +{ + if (mode != REBOOT_SOFT) + samsung_wdt_reset(); + + /* if all else fails, or mode was for soft, jump to 0 */ + soft_restart(0); +} + +static char const *s3c64xx_dt_compat[] __initdata = { + "samsung,s3c6400", + "samsung,s3c6410", + NULL +}; + +DT_MACHINE_START(S3C6400_DT, "Samsung S3C64xx (Flattened Device Tree)") + /* Maintainer: Tomasz Figa <tomasz.figa@gmail.com> */ + .dt_compat = s3c64xx_dt_compat, + .map_io = s3c64xx_dt_map_io, + .init_machine = s3c64xx_dt_init_machine, + .restart = s3c64xx_dt_restart, +MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index 86d980b448fd..a6b338fd0470 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -151,6 +151,7 @@ static struct platform_pwm_backlight_data smartq_backlight_data = { .max_brightness = 1000, .dft_brightness = 600, .pwm_period_ns = 1000000000 / (1000 * 20), + .enable_gpio = -1, .init = smartq_bl_init, }; @@ -337,13 +338,6 @@ err: return ret; } -static int __init smartq_usb_otg_init(void) -{ - clk_xusbxti.rate = 12000000; - - return 0; -} - static int __init smartq_wifi_init(void) { int ret; @@ -377,7 +371,8 @@ static struct map_desc smartq_iodesc[] __initdata = {}; void __init smartq_map_io(void) { s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); + s3c64xx_set_xusbxti_freq(12000000); s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -399,7 +394,6 @@ void __init smartq_machine_init(void) WARN_ON(smartq_lcd_setup_gpio()); WARN_ON(smartq_power_off_init()); WARN_ON(smartq_usb_host_init()); - WARN_ON(smartq_usb_otg_init()); WARN_ON(smartq_wifi_init()); platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices)); diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index d70c0843aea2..27381cfcabbe 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -65,7 +65,7 @@ static struct map_desc smdk6400_iodesc[] = {}; static void __init smdk6400_map_io(void) { s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index d90b450c5645..d5ea938cc9a1 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -625,6 +625,7 @@ static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = { static struct platform_pwm_backlight_data smdk6410_bl_data = { .pwm_id = 1, + .enable_gpio = -1, }; static struct s3c_hsotg_plat smdk6410_hsotg_pdata; @@ -634,7 +635,7 @@ static void __init smdk6410_map_io(void) u32 tmp; s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc)); - s3c24xx_init_clocks(12000000); + s3c64xx_set_xtal_freq(12000000); s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c new file mode 100644 index 000000000000..901a984bddc2 --- /dev/null +++ b/arch/arm/mach-s3c64xx/pl080.c @@ -0,0 +1,244 @@ +/* + * Samsung's S3C64XX generic DMA support using amba-pl08x driver. + * + * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/amba/bus.h> +#include <linux/amba/pl080.h> +#include <linux/amba/pl08x.h> +#include <linux/of.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include "regs-sys.h" + +static int pl08x_get_xfer_signal(const struct pl08x_channel_data *cd) +{ + return cd->min_signal; +} + +static void pl08x_put_xfer_signal(const struct pl08x_channel_data *cd, int ch) +{ +} + +/* + * DMA0 + */ + +static struct pl08x_channel_data s3c64xx_dma0_info[] = { + { + .bus_id = "uart0_tx", + .min_signal = 0, + .max_signal = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart0_rx", + .min_signal = 1, + .max_signal = 1, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart1_tx", + .min_signal = 2, + .max_signal = 2, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart1_rx", + .min_signal = 3, + .max_signal = 3, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart2_tx", + .min_signal = 4, + .max_signal = 4, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart2_rx", + .min_signal = 5, + .max_signal = 5, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart3_tx", + .min_signal = 6, + .max_signal = 6, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart3_rx", + .min_signal = 7, + .max_signal = 7, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "pcm0_tx", + .min_signal = 8, + .max_signal = 8, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "pcm0_rx", + .min_signal = 9, + .max_signal = 9, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s0_tx", + .min_signal = 10, + .max_signal = 10, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s0_rx", + .min_signal = 11, + .max_signal = 11, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "spi0_tx", + .min_signal = 12, + .max_signal = 12, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "spi0_rx", + .min_signal = 13, + .max_signal = 13, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s2_tx", + .min_signal = 14, + .max_signal = 14, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s2_rx", + .min_signal = 15, + .max_signal = 15, + .periph_buses = PL08X_AHB2, + } +}; + +struct pl08x_platform_data s3c64xx_dma0_plat_data = { + .memcpy_channel = { + .bus_id = "memcpy", + .cctl_memcpy = + (PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT | + PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT | + PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | + PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | + PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | + PL080_CONTROL_PROT_SYS), + }, + .lli_buses = PL08X_AHB1, + .mem_buses = PL08X_AHB1, + .get_xfer_signal = pl08x_get_xfer_signal, + .put_xfer_signal = pl08x_put_xfer_signal, + .slave_channels = s3c64xx_dma0_info, + .num_slave_channels = ARRAY_SIZE(s3c64xx_dma0_info), +}; + +static AMBA_AHB_DEVICE(s3c64xx_dma0, "dma-pl080s.0", 0, + 0x75000000, {IRQ_DMA0}, &s3c64xx_dma0_plat_data); + +/* + * DMA1 + */ + +static struct pl08x_channel_data s3c64xx_dma1_info[] = { + { + .bus_id = "pcm1_tx", + .min_signal = 0, + .max_signal = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "pcm1_rx", + .min_signal = 1, + .max_signal = 1, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s1_tx", + .min_signal = 2, + .max_signal = 2, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s1_rx", + .min_signal = 3, + .max_signal = 3, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "spi1_tx", + .min_signal = 4, + .max_signal = 4, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "spi1_rx", + .min_signal = 5, + .max_signal = 5, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ac97_out", + .min_signal = 6, + .max_signal = 6, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ac97_in", + .min_signal = 7, + .max_signal = 7, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ac97_mic", + .min_signal = 8, + .max_signal = 8, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "pwm", + .min_signal = 9, + .max_signal = 9, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "irda", + .min_signal = 10, + .max_signal = 10, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "external", + .min_signal = 11, + .max_signal = 11, + .periph_buses = PL08X_AHB2, + }, +}; + +struct pl08x_platform_data s3c64xx_dma1_plat_data = { + .memcpy_channel = { + .bus_id = "memcpy", + .cctl_memcpy = + (PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT | + PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT | + PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | + PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | + PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | + PL080_CONTROL_PROT_SYS), + }, + .lli_buses = PL08X_AHB1, + .mem_buses = PL08X_AHB1, + .get_xfer_signal = pl08x_get_xfer_signal, + .put_xfer_signal = pl08x_put_xfer_signal, + .slave_channels = s3c64xx_dma1_info, + .num_slave_channels = ARRAY_SIZE(s3c64xx_dma1_info), +}; + +static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0, + 0x75100000, {IRQ_DMA1}, &s3c64xx_dma1_plat_data); + +static int __init s3c64xx_pl080_init(void) +{ + /* Set all DMA configuration to be DMA, not SDMA */ + writel(0xffffff, S3C64XX_SDMA_SEL); + + if (of_have_populated_dt()) + return 0; + + amba_device_register(&s3c64xx_dma0_device, &iomem_resource); + amba_device_register(&s3c64xx_dma1_device, &iomem_resource); + + return 0; +} +arch_initcall(s3c64xx_pl080_init); diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 6a1f91fea678..8cdb824a3b43 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -194,29 +194,8 @@ void s3c_pm_debug_smdkled(u32 set, u32 clear) #endif static struct sleep_save core_save[] = { - SAVE_ITEM(S3C_APLL_LOCK), - SAVE_ITEM(S3C_MPLL_LOCK), - SAVE_ITEM(S3C_EPLL_LOCK), - SAVE_ITEM(S3C_CLK_SRC), - SAVE_ITEM(S3C_CLK_DIV0), - SAVE_ITEM(S3C_CLK_DIV1), - SAVE_ITEM(S3C_CLK_DIV2), - SAVE_ITEM(S3C_CLK_OUT), - SAVE_ITEM(S3C_HCLK_GATE), - SAVE_ITEM(S3C_PCLK_GATE), - SAVE_ITEM(S3C_SCLK_GATE), - SAVE_ITEM(S3C_MEM0_GATE), - - SAVE_ITEM(S3C_EPLL_CON1), - SAVE_ITEM(S3C_EPLL_CON0), - SAVE_ITEM(S3C64XX_MEM0DRVCON), SAVE_ITEM(S3C64XX_MEM1DRVCON), - -#ifndef CONFIG_CPU_FREQ - SAVE_ITEM(S3C_APLL_CON), - SAVE_ITEM(S3C_MPLL_CON), -#endif }; static struct sleep_save misc_save[] = { diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 4869714c6f1b..3db0c98222f7 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -9,6 +9,10 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used when booting with Device Tree support. + */ + #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -20,6 +24,7 @@ #include <linux/device.h> #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/of.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -58,12 +63,6 @@ void __init s3c6400_map_io(void) s3c64xx_onenand1_setname("s3c6400-onenand"); } -void __init s3c6400_init_clocks(int xtal) -{ - s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK); - s3c64xx_setup_clocks(); -} - void __init s3c6400_init_irq(void) { /* VIC0 does not have IRQS 5..7, @@ -82,6 +81,10 @@ static struct device s3c6400_dev = { static int __init s3c6400_core_init(void) { + /* Not applicable when using DT. */ + if (of_have_populated_dt()) + return 0; + return subsys_system_register(&s3c6400_subsys, NULL); } diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c index 31c29fdf1800..72b2278953a8 100644 --- a/arch/arm/mach-s3c64xx/s3c6410.c +++ b/arch/arm/mach-s3c64xx/s3c6410.c @@ -10,6 +10,10 @@ * published by the Free Software Foundation. */ +/* + * NOTE: Code in this file is not used when booting with Device Tree support. + */ + #include <linux/kernel.h> #include <linux/types.h> #include <linux/interrupt.h> @@ -21,6 +25,7 @@ #include <linux/device.h> #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/of.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -62,13 +67,6 @@ void __init s3c6410_map_io(void) s3c_cfcon_setname("s3c64xx-pata"); } -void __init s3c6410_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initialising clocks\n", __func__); - s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK); - s3c64xx_setup_clocks(); -} - void __init s3c6410_init_irq(void) { /* VIC0 is missing IRQ7, VIC1 is fully populated. */ @@ -86,6 +84,10 @@ static struct device s3c6410_dev = { static int __init s3c6410_core_init(void) { + /* Not applicable when using DT. */ + if (of_have_populated_dt()) + return 0; + return subsys_system_register(&s3c6410_subsys, NULL); } |