diff options
Diffstat (limited to 'arch/arm/mach-s3c64xx')
| -rw-r--r-- | arch/arm/mach-s3c64xx/Kconfig | 9 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/clock.c | 126 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/common.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/common.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/cpuidle.c | 91 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/include/mach/crag6410.h | 1 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/include/mach/entry-macro.S | 19 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/include/mach/io.h | 18 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/include/mach/system.h | 19 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/irq-pm.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/mach-crag6410-module.c | 46 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/mach-crag6410.c | 90 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/mach-smartq.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/mach-smdk6410.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/pm.c | 13 | ||||
| -rw-r--r-- | arch/arm/mach-s3c64xx/setup-usb-phy.c | 90 |
17 files changed, 438 insertions, 100 deletions
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index dd20c66cd700..82c0915729ee 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -83,6 +83,11 @@ config S3C64XX_SETUP_SPI help Common setup code for SPI GPIO configurations +config S3C64XX_SETUP_USB_PHY + bool + help + Common setup code for USB PHY controller + # S36400 Macchine support config MACH_SMDK6400 @@ -157,6 +162,7 @@ config MACH_SMDK6410 select S3C64XX_SETUP_IDE select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_KEYPAD + select S3C64XX_SETUP_USB_PHY help Machine support for the Samsung SMDK6410 @@ -256,6 +262,7 @@ config MACH_SMARTQ select S3C_DEV_USB_HOST select S3C64XX_SETUP_SDHCI select S3C64XX_SETUP_FB_24BPP + select S3C64XX_SETUP_USB_PHY select SAMSUNG_DEV_ADC select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS @@ -283,6 +290,7 @@ config MACH_WLF_CRAGG_6410 select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_KEYPAD select S3C64XX_SETUP_SPI + select S3C64XX_SETUP_USB_PHY select SAMSUNG_DEV_ADC select SAMSUNG_DEV_KEYPAD select S3C_DEV_USB_HOST @@ -296,5 +304,6 @@ config MACH_WLF_CRAGG_6410 select S3C64XX_DEV_SPI0 select SAMSUNG_GPIO_EXTRA128 select I2C + select LEDS_GPIO_REGISTER help Machine support for the Wolfson Cragganmore S3C6410 variant. diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 1822ac2eba31..f9ce1dc28ce4 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_CPU_S3C6410) += s3c6410.o # PM obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o +obj-$(CONFIG_CPU_IDLE) += cpuidle.o # DMA support @@ -42,6 +43,7 @@ obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi.o +obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy.o # Machine support diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 31bb27dc4aeb..52f079a691cb 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -138,6 +138,11 @@ static struct clk init_clocks_off[] = { .ctrlbit = S3C_CLKCON_PCLK_TSADC, }, { .name = "i2c", +#ifdef CONFIG_S3C_DEV_I2C1 + .devname = "s3c2440-i2c.0", +#else + .devname = "s3c2440-i2c", +#endif .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_IIC, @@ -202,6 +207,15 @@ static struct clk init_clocks_off[] = { .enable = s3c64xx_sclk_ctrl, .ctrlbit = S3C_CLKCON_SCLK_MMC2_48, }, { + .name = "ac97", + .parent = &clk_p, + .ctrlbit = S3C_CLKCON_PCLK_AC97, + }, { + .name = "cfcon", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_IHOST, + }, { .name = "dma0", .parent = &clk_h, .enable = s3c64xx_hclk_ctrl, @@ -211,6 +225,107 @@ static struct clk init_clocks_off[] = { .parent = &clk_h, .enable = s3c64xx_hclk_ctrl, .ctrlbit = S3C_CLKCON_HCLK_DMA1, + }, { + .name = "3dse", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_3DSE, + }, { + .name = "hclk_secur", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_SECUR, + }, { + .name = "sdma1", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_SDMA1, + }, { + .name = "sdma0", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_SDMA0, + }, { + .name = "hclk_jpeg", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_JPEG, + }, { + .name = "camif", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_CAMIF, + }, { + .name = "hclk_scaler", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_SCALER, + }, { + .name = "2d", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_2D, + }, { + .name = "tv", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_TV, + }, { + .name = "post0", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_POST0, + }, { + .name = "rot", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_ROT, + }, { + .name = "hclk_mfc", + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_MFC, + }, { + .name = "pclk_mfc", + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_MFC, + }, { + .name = "dac27", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_DAC27, + }, { + .name = "tv27", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_TV27, + }, { + .name = "scaler27", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_SCALER27, + }, { + .name = "sclk_scaler", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_SCALER, + }, { + .name = "post0_27", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_POST0_27, + }, { + .name = "secur", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_SECUR, + }, { + .name = "sclk_mfc", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_MFC, + }, { + .name = "cam", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_CAM, + }, { + .name = "sclk_jpeg", + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_JPEG, }, }; @@ -284,16 +399,7 @@ static struct clk init_clocks[] = { .name = "watchdog", .parent = &clk_p, .ctrlbit = S3C_CLKCON_PCLK_WDT, - }, { - .name = "ac97", - .parent = &clk_p, - .ctrlbit = S3C_CLKCON_PCLK_AC97, - }, { - .name = "cfcon", - .parent = &clk_h, - .enable = s3c64xx_hclk_ctrl, - .ctrlbit = S3C_CLKCON_HCLK_IHOST, - } + }, }; static struct clk clk_hsmmc0 = { diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 4a7394d4bd9e..b313380342a5 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -29,6 +29,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/hardware/vic.h> +#include <asm/system_misc.h> #include <mach/map.h> #include <mach/hardware.h> @@ -49,7 +50,7 @@ /* uart registration process */ -void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) +static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) { s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no); } diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h index 5eb9c9a7d73b..7a10be629aba 100644 --- a/arch/arm/mach-s3c64xx/common.h +++ b/arch/arm/mach-s3c64xx/common.h @@ -25,8 +25,6 @@ void s3c64xx_setup_clocks(void); void s3c64xx_restart(char mode, const char *cmd); -extern struct syscore_ops s3c64xx_irq_syscore_ops; - #ifdef CONFIG_CPU_S3C6400 extern int s3c6400_init(void); diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c new file mode 100644 index 000000000000..179460f38db7 --- /dev/null +++ b/arch/arm/mach-s3c64xx/cpuidle.c @@ -0,0 +1,91 @@ +/* linux/arch/arm/mach-s3c64xx/cpuidle.c + * + * Copyright (c) 2011 Wolfson Microelectronics, plc + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/cpuidle.h> +#include <linux/io.h> +#include <linux/export.h> +#include <linux/time.h> + +#include <asm/proc-fns.h> + +#include <mach/map.h> + +#include <mach/regs-sys.h> +#include <mach/regs-syscon-power.h> + +static int s3c64xx_enter_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + struct timeval before, after; + unsigned long tmp; + int idle_time; + + local_irq_disable(); + do_gettimeofday(&before); + + /* Setup PWRCFG to enter idle mode */ + tmp = __raw_readl(S3C64XX_PWR_CFG); + tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK; + tmp |= S3C64XX_PWRCFG_CFG_WFI_IDLE; + __raw_writel(tmp, S3C64XX_PWR_CFG); + + cpu_do_idle(); + + do_gettimeofday(&after); + local_irq_enable(); + idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + + (after.tv_usec - before.tv_usec); + + dev->last_residency = idle_time; + return index; +} + +static struct cpuidle_state s3c64xx_cpuidle_set[] = { + [0] = { + .enter = s3c64xx_enter_idle, + .exit_latency = 1, + .target_residency = 1, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "IDLE", + .desc = "System active, ARM gated", + }, +}; + +static struct cpuidle_driver s3c64xx_cpuidle_driver = { + .name = "s3c64xx_cpuidle", + .owner = THIS_MODULE, + .state_count = ARRAY_SIZE(s3c64xx_cpuidle_set), +}; + +static struct cpuidle_device s3c64xx_cpuidle_device = { + .state_count = ARRAY_SIZE(s3c64xx_cpuidle_set), +}; + +static int __init s3c64xx_init_cpuidle(void) +{ + int ret; + + memcpy(s3c64xx_cpuidle_driver.states, s3c64xx_cpuidle_set, + sizeof(s3c64xx_cpuidle_set)); + cpuidle_register_driver(&s3c64xx_cpuidle_driver); + + ret = cpuidle_register_device(&s3c64xx_cpuidle_device); + if (ret) { + pr_err("Failed to register cpuidle device: %d\n", ret); + return ret; + } + + return 0; +} +device_initcall(s3c64xx_init_cpuidle); diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h index 5d55ab018b6b..4cb2f951f1e9 100644 --- a/arch/arm/mach-s3c64xx/include/mach/crag6410.h +++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h @@ -21,5 +21,6 @@ #define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) #define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 32) #define BANFF_PMIC_GPIO_BASE (GPIO_BOARD_START + 64) +#define MMGPIO_GPIO_BASE (GPIO_BOARD_START + 96) #endif diff --git a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S deleted file mode 100644 index dc2bc15142ce..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S +++ /dev/null @@ -1,19 +0,0 @@ -/* arch/arm/mach-s3c6400/include/mach/entry-macro.S - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * Low-level IRQ helper macros for the Samsung S3C64XX series - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. -*/ - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm diff --git a/arch/arm/mach-s3c64xx/include/mach/io.h b/arch/arm/mach-s3c64xx/include/mach/io.h deleted file mode 100644 index de5716dbbd65..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/io.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-s3c64xxinclude/mach/io.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben-linux@fluff.org> - * - * Default IO routines for S3C64XX based - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* No current ISA/PCI bus support. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#define IO_SPACE_LIMIT (0xFFFFFFFF) - -#endif diff --git a/arch/arm/mach-s3c64xx/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h deleted file mode 100644 index 353ed4389ae7..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/system.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C6400 - system implementation - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c index 8bec61e242c7..0c7e1d960ca4 100644 --- a/arch/arm/mach-s3c64xx/irq-pm.c +++ b/arch/arm/mach-s3c64xx/irq-pm.c @@ -96,7 +96,7 @@ static void s3c64xx_irq_pm_resume(void) S3C_PMDBG("%s: IRQ configuration restored\n", __func__); } -struct syscore_ops s3c64xx_irq_syscore_ops = { +static struct syscore_ops s3c64xx_irq_syscore_ops = { .suspend = s3c64xx_irq_pm_suspend, .resume = s3c64xx_irq_pm_resume, }; diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index cd3c97e2ee75..0ace108c3e3d 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -11,18 +11,38 @@ #include <linux/export.h> #include <linux/interrupt.h> #include <linux/i2c.h> +#include <linux/spi/spi.h> #include <linux/mfd/wm831x/irq.h> #include <linux/mfd/wm831x/gpio.h> #include <linux/mfd/wm8994/pdata.h> +#include <linux/regulator/machine.h> + #include <sound/wm5100.h> #include <sound/wm8996.h> #include <sound/wm8962.h> #include <sound/wm9081.h> +#include <plat/s3c64xx-spi.h> + #include <mach/crag6410.h> +static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = { + .set_level = gpio_set_value, + .line = S3C64XX_GPC(3), +}; + +static struct spi_board_info wm1253_devs[] = { + [0] = { + .modalias = "wm0010", + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + .controller_data = &wm0010_spi_csinfo, + }, +}; + static struct wm5100_pdata wm5100_pdata = { .ldo_ena = S3C64XX_GPN(7), .irq_flags = IRQF_TRIGGER_HIGH, @@ -102,6 +122,7 @@ static struct wm8962_pdata wm8962_pdata __initdata = { 0x8000 | WM8962_GPIO_FN_DMICDAT, WM8962_GPIO_FN_IRQ, /* Open drain mode */ }, + .in4_dc_measure = true, }; static struct wm9081_pdata wm9081_pdata __initdata = { @@ -134,6 +155,14 @@ static const struct i2c_board_info wm1259_devs[] = { }, }; +static struct regulator_init_data wm8994_ldo1 = { + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data wm8994_ldo2 = { + .supply_regulator = "WALLVDD", +}; + static struct wm8994_pdata wm8994_pdata = { .gpio_base = CODEC_GPIO_BASE, .gpio_defaults = { @@ -141,8 +170,8 @@ static struct wm8994_pdata wm8994_pdata = { }, .irq_base = CODEC_IRQ_BASE, .ldo = { - { .supply = "WALLVDD" }, - { .supply = "WALLVDD" }, + { .init_data = &wm8994_ldo1, }, + { .init_data = &wm8994_ldo2, }, }, }; @@ -158,14 +187,21 @@ static __devinitdata const struct { const char *name; const struct i2c_board_info *i2c_devs; int num_i2c_devs; + const struct spi_board_info *spi_devs; + int num_spi_devs; } gf_mods[] = { { .id = 0x01, .name = "1250-EV1 Springbank" }, { .id = 0x02, .name = "1251-EV1 Jura" }, { .id = 0x03, .name = "1252-EV1 Glenlivet" }, { .id = 0x11, .name = "6249-EV2 Glenfarclas", }, + { .id = 0x14, .name = "6271-EV1 Lochnagar" }, + { .id = 0x15, .name = "XXXX-EV1 Bells" }, { .id = 0x21, .name = "1275-EV1 Mortlach" }, { .id = 0x25, .name = "1274-EV1 Glencadam" }, - { .id = 0x31, .name = "1253-EV1 Tomatin", }, + { .id = 0x31, .name = "1253-EV1 Tomatin", + .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) }, + { .id = 0x32, .name = "XXXX-EV1 Caol Illa" }, + { .id = 0x33, .name = "XXXX-EV1 Oban" }, { .id = 0x39, .name = "1254-EV1 Dallas Dhu", .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) }, { .id = 0x3a, .name = "1259-EV1 Tobermory", @@ -197,12 +233,16 @@ static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, if (i < ARRAY_SIZE(gf_mods)) { dev_info(&i2c->dev, "%s revision %d\n", gf_mods[i].name, rev + 1); + for (j = 0; j < gf_mods[i].num_i2c_devs; j++) { if (!i2c_new_device(i2c->adapter, &(gf_mods[i].i2c_devs[j]))) dev_err(&i2c->dev, "Failed to register dev: %d\n", ret); } + + spi_register_board_info(gf_mods[i].spi_devs, + gf_mods[i].num_spi_devs); } else { dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n", id, rev + 1); diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 680fd758ff2d..e20bf5835365 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -19,7 +19,9 @@ #include <linux/io.h> #include <linux/init.h> #include <linux/gpio.h> +#include <linux/leds.h> #include <linux/delay.h> +#include <linux/mmc/host.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> #include <linux/pwm_backlight.h> @@ -59,6 +61,7 @@ #include <plat/sdhci.h> #include <plat/gpio-cfg.h> #include <plat/s3c64xx-spi.h> +#include <plat/udc-hs.h> #include <plat/keypad.h> #include <plat/clock.h> @@ -260,6 +263,7 @@ static struct platform_device crag6410_dm9k_device = { static struct resource crag6410_mmgpio_resource[] = { [0] = { + .name = "dat", .start = S3C64XX_PA_XM0CSN4 + 1, .end = S3C64XX_PA_XM0CSN4 + 1, .flags = IORESOURCE_MEM, @@ -272,7 +276,7 @@ static struct platform_device crag6410_mmgpio = { .resource = crag6410_mmgpio_resource, .num_resources = ARRAY_SIZE(crag6410_mmgpio_resource), .dev.platform_data = &(struct bgpio_pdata) { - .base = -1, + .base = MMGPIO_GPIO_BASE, }, }; @@ -286,8 +290,8 @@ static struct platform_device lowland_device = { .id = -1, }; -static struct platform_device speyside_wm8962_device = { - .name = "speyside-wm8962", +static struct platform_device tobermory_device = { + .name = "tobermory", .id = -1, }; @@ -297,6 +301,7 @@ static struct platform_device littlemill_device = { }; static struct regulator_consumer_supply wallvdd_consumers[] = { + REGULATOR_SUPPLY("SPKVDD", "1-001a"), REGULATOR_SUPPLY("SPKVDD1", "1-001a"), REGULATOR_SUPPLY("SPKVDD2", "1-001a"), REGULATOR_SUPPLY("SPKVDDL", "1-001a"), @@ -328,7 +333,6 @@ static struct platform_device wallvdd_device = { static struct platform_device *crag6410_devices[] __initdata = { &s3c_device_hsmmc0, - &s3c_device_hsmmc1, &s3c_device_hsmmc2, &s3c_device_i2c0, &s3c_device_i2c1, @@ -347,7 +351,7 @@ static struct platform_device *crag6410_devices[] __initdata = { &crag6410_lcd_powerdev, &crag6410_backlight_device, &speyside_device, - &speyside_wm8962_device, + &tobermory_device, &littlemill_device, &lowland_device, &wallvdd_device, @@ -355,7 +359,7 @@ static struct platform_device *crag6410_devices[] __initdata = { static struct pca953x_platform_data crag6410_pca_data = { .gpio_base = PCA935X_GPIO_BASE, - .irq_base = 0, + .irq_base = -1, }; /* VDDARM is controlled by DVS1 connected to GPK(0) */ @@ -574,11 +578,19 @@ static struct s3c2410_platform_i2c i2c0_pdata = { .frequency = 400000, }; +static struct regulator_consumer_supply pvdd_1v2_consumers[] __initdata = { + REGULATOR_SUPPLY("DCVDD", "spi0.0"), + REGULATOR_SUPPLY("AVDD", "spi0.0"), +}; + static struct regulator_init_data pvdd_1v2 __initdata = { .constraints = { .name = "PVDD_1V2", - .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + + .consumer_supplies = pvdd_1v2_consumers, + .num_consumer_supplies = ARRAY_SIZE(pvdd_1v2_consumers), }; static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = { @@ -592,6 +604,7 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = { REGULATOR_SUPPLY("AVDD2", "1-001a"), REGULATOR_SUPPLY("DCVDD", "1-001a"), REGULATOR_SUPPLY("AVDD", "1-001a"), + REGULATOR_SUPPLY("DBVDD", "spi0.0"), }; static struct regulator_init_data pvdd_1v8 __initdata = { @@ -681,12 +694,7 @@ static void __init crag6410_map_io(void) static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = { .max_width = 4, .cd_type = S3C_SDHCI_CD_PERMANENT, -}; - -static struct s3c_sdhci_platdata crag6410_hsmmc1_pdata = { - .max_width = 4, - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S3C64XX_GPF(11), + .host_caps = MMC_CAP_POWER_OFF_CARD, }; static void crag6410_cfg_sdhci0(struct platform_device *dev, int width) @@ -702,8 +710,59 @@ static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = { .max_width = 4, .cd_type = S3C_SDHCI_CD_INTERNAL, .cfg_gpio = crag6410_cfg_sdhci0, + .host_caps = MMC_CAP_POWER_OFF_CARD, }; +static const struct gpio_led gpio_leds[] = { + { + .name = "d13:green:", + .gpio = MMGPIO_GPIO_BASE + 0, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d14:green:", + .gpio = MMGPIO_GPIO_BASE + 1, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d15:green:", + .gpio = MMGPIO_GPIO_BASE + 2, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d16:green:", + .gpio = MMGPIO_GPIO_BASE + 3, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d17:green:", + .gpio = MMGPIO_GPIO_BASE + 4, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d18:green:", + .gpio = MMGPIO_GPIO_BASE + 5, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d19:green:", + .gpio = MMGPIO_GPIO_BASE + 6, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d20:green:", + .gpio = MMGPIO_GPIO_BASE + 7, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, +}; + +static const struct gpio_led_platform_data gpio_leds_pdata = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct s3c_hsotg_plat crag6410_hsotg_pdata; + static void __init crag6410_machine_init(void) { /* Open drain IRQs need pullups */ @@ -723,20 +782,23 @@ static void __init crag6410_machine_init(void) gpio_direction_output(S3C64XX_GPF(10), 1); s3c_sdhci0_set_platdata(&crag6410_hsmmc0_pdata); - s3c_sdhci1_set_platdata(&crag6410_hsmmc1_pdata); s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata); s3c_i2c0_set_platdata(&i2c0_pdata); s3c_i2c1_set_platdata(&i2c1_pdata); s3c_fb_set_platdata(&crag6410_lcd_pdata); + s3c_hsotg_set_platdata(&crag6410_hsotg_pdata); i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); samsung_keypad_set_platdata(&crag6410_keypad_data); + s3c64xx_spi0_set_platdata(&s3c64xx_spi0_pdata, 0, 1); platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices)); + gpio_led_register_device(-1, &gpio_leds_pdata); + regulator_has_full_constraints(); s3c64xx_pm_init(); diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index ce31db136231..ce745e19aa27 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -187,6 +187,8 @@ static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = { }, }; +static struct s3c_hsotg_plat smartq_hsotg_pdata; + static int __init smartq_lcd_setup_gpio(void) { int ret; @@ -383,6 +385,7 @@ void __init smartq_map_io(void) void __init smartq_machine_init(void) { s3c_i2c0_set_platdata(NULL); + s3c_hsotg_set_platdata(&smartq_hsotg_pdata); s3c_hwmon_set_platdata(&smartq_hwmon_pdata); s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata); s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata); diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index ca6fc204f0ea..d55bc96d9582 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -72,6 +72,7 @@ #include <plat/keypad.h> #include <plat/backlight.h> #include <plat/regs-fb-v4.h> +#include <plat/udc-hs.h> #include "common.h" @@ -631,6 +632,8 @@ static struct platform_pwm_backlight_data smdk6410_bl_data = { .pwm_id = 1, }; +static struct s3c_hsotg_plat smdk6410_hsotg_pdata; + static void __init smdk6410_map_io(void) { u32 tmp; @@ -659,6 +662,7 @@ static void __init smdk6410_machine_init(void) s3c_i2c0_set_platdata(NULL); s3c_i2c1_set_platdata(NULL); s3c_fb_set_platdata(&smdk6410_lcd_pdata); + s3c_hsotg_set_platdata(&smdk6410_hsotg_pdata); samsung_keypad_set_platdata(&smdk6410_keypad_data); diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 055dac90e0e2..7d3e81b9dd06 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -346,23 +346,10 @@ int __init s3c64xx_pm_init(void) static __init int s3c64xx_pm_initcall(void) { - u32 val; - pm_cpu_prep = s3c64xx_pm_prepare; pm_cpu_sleep = s3c64xx_cpu_suspend; pm_uart_udivslot = 1; - /* - * Unconditionally disable power domains that contain only - * blocks which have no mainline driver support. - */ - val = __raw_readl(S3C64XX_NORMAL_CFG); - val &= ~(S3C64XX_NORMALCFG_DOMAIN_G_ON | - S3C64XX_NORMALCFG_DOMAIN_V_ON | - S3C64XX_NORMALCFG_DOMAIN_I_ON | - S3C64XX_NORMALCFG_DOMAIN_P_ON); - __raw_writel(val, S3C64XX_NORMAL_CFG); - #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK gpio_request(S3C64XX_GPN(12), "DEBUG_LED0"); gpio_request(S3C64XX_GPN(13), "DEBUG_LED1"); diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c new file mode 100644 index 000000000000..f6757e02d7db --- /dev/null +++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c @@ -0,0 +1,90 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <mach/map.h> +#include <mach/regs-sys.h> +#include <plat/cpu.h> +#include <plat/regs-usb-hsotg-phy.h> +#include <plat/usb-phy.h> + +static int s3c_usb_otgphy_init(struct platform_device *pdev) +{ + struct clk *xusbxti; + u32 phyclk; + + writel(readl(S3C64XX_OTHERS) | S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS); + + /* set clock frequency for PLL */ + phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK; + + xusbxti = clk_get(&pdev->dev, "xusbxti"); + if (xusbxti && !IS_ERR(xusbxti)) { + switch (clk_get_rate(xusbxti)) { + case 12 * MHZ: + phyclk |= S3C_PHYCLK_CLKSEL_12M; + break; + case 24 * MHZ: + phyclk |= S3C_PHYCLK_CLKSEL_24M; + break; + default: + case 48 * MHZ: + /* default reference clock */ + break; + } + clk_put(xusbxti); + } + + /* TODO: select external clock/oscillator */ + writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK); + + /* set to normal OTG PHY */ + writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR); + mdelay(1); + + /* reset OTG PHY and Link */ + writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK, + S3C_RSTCON); + udelay(20); /* at-least 10uS */ + writel(0, S3C_RSTCON); + + return 0; +} + +static int s3c_usb_otgphy_exit(struct platform_device *pdev) +{ + writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN | + S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR); + + writel(readl(S3C64XX_OTHERS) & ~S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS); + + return 0; +} + +int s5p_usb_phy_init(struct platform_device *pdev, int type) +{ + if (type == S5P_USB_PHY_DEVICE) + return s3c_usb_otgphy_init(pdev); + + return -EINVAL; +} + +int s5p_usb_phy_exit(struct platform_device *pdev, int type) +{ + if (type == S5P_USB_PHY_DEVICE) + return s3c_usb_otgphy_exit(pdev); + + return -EINVAL; +} |