diff options
Diffstat (limited to 'arch/arm/mach-s5pv210')
22 files changed, 8 insertions, 3563 deletions
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index ed492cf10a16..d6d0f9268935 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -19,181 +19,8 @@ config CPU_S5PV210 help Enable S5PV210 CPU support -config S5PV210_SETUP_I2C1 - bool - help - Common setup code for i2c bus 1. - -config S5PV210_SETUP_I2C2 - bool - help - Common setup code for i2c bus 2. - -config S5PV210_SETUP_IDE - bool - help - Common setup code for S5PV210 IDE GPIO configurations - -config S5PV210_SETUP_FB_24BPP - bool - help - Common setup code for S5PV210 with an 24bpp RGB display helper. - -config S5PV210_SETUP_KEYPAD - bool - help - Common setup code for keypad. - -config S5PV210_SETUP_SDHCI - bool - select S5PV210_SETUP_SDHCI_GPIO - help - Internal helper functions for S5PV210 based SDHCI systems - -config S5PV210_SETUP_SDHCI_GPIO - bool - help - Common setup code for SDHCI gpio. - -config S5PV210_SETUP_FIMC - bool - help - Common setup code for the camera interfaces. - -config S5PV210_SETUP_SPI - bool - help - Common setup code for SPI GPIO configurations. - -config S5PV210_SETUP_USB_PHY - bool - help - Common setup code for USB PHY controller - -menu "S5PC110 Machines" - -config MACH_AQUILA - bool "Aquila" - select CPU_S5PV210 - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S5PV210_SETUP_FB_24BPP - select S5PV210_SETUP_SDHCI - select S5PV210_SETUP_USB_PHY - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_ONENAND - help - Machine support for the Samsung Aquila target based on S5PC110 SoC - -config MACH_GONI - bool "GONI" - select CPU_S5PV210 - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_I2C1 - select S3C_DEV_I2C2 - select S3C_DEV_USB_HSOTG - select S5PV210_SETUP_FB_24BPP - select S5PV210_SETUP_FIMC - select S5PV210_SETUP_I2C1 - select S5PV210_SETUP_I2C2 - select S5PV210_SETUP_KEYPAD - select S5PV210_SETUP_SDHCI - select S5PV210_SETUP_USB_PHY - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_MFC - select S5P_DEV_ONENAND - select S5P_DEV_TV - select S5P_GPIO_INT - select SAMSUNG_DEV_KEYPAD - help - Machine support for Samsung GONI board - S5PC110(MCP) is one of package option of S5PV210 - -config MACH_SMDKC110 - bool "SMDKC110" - select CPU_S5PV210 - select S3C_DEV_I2C1 - select S3C_DEV_I2C2 - select S3C_DEV_RTC - select S3C_DEV_WDT - select S5PV210_SETUP_I2C1 - select S5PV210_SETUP_I2C2 - select S5PV210_SETUP_IDE - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_MFC - select SAMSUNG_DEV_IDE - help - Machine support for Samsung SMDKC110 - S5PC110(MCP) is one of package option of S5PV210 - -endmenu - menu "S5PV210 Machines" -config MACH_SMDKV210 - bool "SMDKV210" - select CPU_S5PV210 - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_I2C1 - select S3C_DEV_I2C2 - select S3C_DEV_RTC - select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select S5PV210_SETUP_FB_24BPP - select S5PV210_SETUP_I2C1 - select S5PV210_SETUP_I2C2 - select S5PV210_SETUP_IDE - select S5PV210_SETUP_KEYPAD - select S5PV210_SETUP_SDHCI - select S5PV210_SETUP_USB_PHY - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_JPEG - select S5P_DEV_MFC - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_IDE - select SAMSUNG_DEV_KEYPAD - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_TS - help - Machine support for Samsung SMDKV210 - -config MACH_TORBRECK - bool "Torbreck" - select ARCH_SPARSEMEM_ENABLE - select CPU_S5PV210 - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_I2C1 - select S3C_DEV_I2C2 - select S3C_DEV_RTC - select S3C_DEV_WDT - select S5PV210_SETUP_I2C1 - select S5PV210_SETUP_I2C2 - select S5PV210_SETUP_SDHCI - select SAMSUNG_DEV_IDE - help - Machine support for aESOP Torbreck - config MACH_S5PV210_DT bool "Samsung S5PV210/S5PC110 machine using Device Tree" select CLKSRC_OF diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 8d87b10ea461..83993fc87d87 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -12,30 +12,11 @@ obj- := # Core -obj-y += common.o obj-$(CONFIG_PM) += pm.o -obj-y += dma.o - # machine support -obj-$(CONFIG_MACH_AQUILA) += mach-aquila.o -obj-$(CONFIG_MACH_GONI) += mach-goni.o -obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o -obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o -obj-$(CONFIG_MACH_TORBRECK) += mach-torbreck.o obj-$(CONFIG_MACH_S5PV210_DT) += s5pv210.o # device support -obj-y += dev-audio.o - obj-y += setup-i2c0.o -obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o -obj-$(CONFIG_S5PV210_SETUP_FIMC) += setup-fimc.o -obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o -obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o -obj-$(CONFIG_S5PV210_SETUP_IDE) += setup-ide.o -obj-$(CONFIG_S5PV210_SETUP_KEYPAD) += setup-keypad.o -obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o -obj-$(CONFIG_S5PV210_SETUP_SPI) += setup-spi.o -obj-$(CONFIG_S5PV210_SETUP_USB_PHY) += setup-usb-phy.o diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c deleted file mode 100644 index 30bd5421aa79..000000000000 --- a/arch/arm/mach-s5pv210/common.c +++ /dev/null @@ -1,281 +0,0 @@ -/* - * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Common Codes for S5PV210 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/clk.h> -#include <linux/clk-provider.h> -#include <linux/io.h> -#include <linux/device.h> -#include <clocksource/samsung_pwm.h> -#include <linux/platform_device.h> -#include <linux/sched.h> -#include <linux/dma-mapping.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/of.h> - -#include <asm/proc-fns.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/cpu.h> - -#include <plat/devs.h> -#include <plat/sdhci.h> -#include <plat/adc-core.h> -#include <plat/ata-core.h> -#include <plat/fb-core.h> -#include <plat/fimc-core.h> -#include <plat/iic-core.h> -#include <plat/keypad-core.h> -#include <plat/pwm-core.h> -#include <plat/tv-core.h> -#include <plat/spi-core.h> - -#include "common.h" - -/* External clock frequency */ -static unsigned long xusbxti_f; - -static const char name_s5pv210[] = "S5PV210/S5PC110"; - -static struct cpu_table cpu_ids[] __initdata = { - { - .idcode = S5PV210_CPU_ID, - .idmask = S5PV210_CPU_MASK, - .map_io = s5pv210_map_io, - .init_clocks = s5pv210_init_clocks, - .init_uarts = s5pv210_init_uarts, - .init = s5pv210_init, - .name = name_s5pv210, - }, -}; - -/* Initial IO mappings */ - -static struct map_desc s5pv210_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_CHIPID, - .pfn = __phys_to_pfn(S5PV210_PA_CHIPID), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_SYS, - .pfn = __phys_to_pfn(S5PV210_PA_SYSCON), - .length = SZ_64K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_TIMER, - .pfn = __phys_to_pfn(S5PV210_PA_TIMER), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_WATCHDOG, - .pfn = __phys_to_pfn(S5PV210_PA_WATCHDOG), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_SROMC, - .pfn = __phys_to_pfn(S5PV210_PA_SROMC), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_SYSTIMER, - .pfn = __phys_to_pfn(S5PV210_PA_SYSTIMER), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GPIO, - .pfn = __phys_to_pfn(S5PV210_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC0, - .pfn = __phys_to_pfn(S5PV210_PA_VIC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC1, - .pfn = __phys_to_pfn(S5PV210_PA_VIC1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC2, - .pfn = __phys_to_pfn(S5PV210_PA_VIC2), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC3, - .pfn = __phys_to_pfn(S5PV210_PA_VIC3), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S3C_PA_UART), - .length = SZ_512K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_DMC0, - .pfn = __phys_to_pfn(S5PV210_PA_DMC0), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_DMC1, - .pfn = __phys_to_pfn(S5PV210_PA_DMC1), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_USB_HSPHY, - .pfn =__phys_to_pfn(S5PV210_PA_HSPHY), - .length = SZ_4K, - .type = MT_DEVICE, - } -}; - -void s5pv210_restart(enum reboot_mode mode, const char *cmd) -{ - __raw_writel(0x1, S5P_SWRESET); -} - -static struct samsung_pwm_variant s5pv210_pwm_variant = { - .bits = 32, - .div_base = 0, - .has_tint_cstat = true, - .tclk_mask = (1 << 5), -}; - -void __init samsung_set_timer_source(unsigned int event, unsigned int source) -{ - s5pv210_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; - s5pv210_pwm_variant.output_mask &= ~(BIT(event) | BIT(source)); -} - -void __init samsung_timer_init(void) -{ - unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { - IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC, - IRQ_TIMER3_VIC, IRQ_TIMER4_VIC, - }; - - samsung_pwm_clocksource_init(S3C_VA_TIMER, - timer_irqs, &s5pv210_pwm_variant); -} - -/* - * s5pv210_map_io - * - * register the standard cpu IO areas - */ - -void __init s5pv210_init_io(struct map_desc *mach_desc, int size) -{ - /* initialize the io descriptors we need for initialization */ - iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc)); - if (mach_desc) - iotable_init(mach_desc, size); - - /* detect cpu id and rev. */ - s5p_init_cpu(S5P_VA_CHIPID); - - s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); - - samsung_pwm_set_platdata(&s5pv210_pwm_variant); -} - -void __init s5pv210_map_io(void) -{ - /* initialise device information early */ - s5pv210_default_sdhci0(); - s5pv210_default_sdhci1(); - s5pv210_default_sdhci2(); - s5pv210_default_sdhci3(); - - s3c_adc_setname("samsung-adc-v3"); - - s3c_cfcon_setname("s5pv210-pata"); - - s3c_fimc_setname(0, "s5pv210-fimc"); - s3c_fimc_setname(1, "s5pv210-fimc"); - s3c_fimc_setname(2, "s5pv210-fimc"); - - /* the i2c devices are directly compatible with s3c2440 */ - s3c_i2c0_setname("s3c2440-i2c"); - s3c_i2c1_setname("s3c2440-i2c"); - s3c_i2c2_setname("s3c2440-i2c"); - - s3c_fb_setname("s5pv210-fb"); - - /* Use s5pv210-keypad instead of samsung-keypad */ - samsung_keypad_setname("s5pv210-keypad"); - - /* setup TV devices */ - s5p_hdmi_setname("s5pv210-hdmi"); - - s3c64xx_spi_setname("s5pv210-spi"); -} - -void __init s5pv210_init_clocks(int xtal) -{ - xusbxti_f = xtal; -} - -void __init s5pv210_init_irq(void) -{ - u32 vic[4]; /* S5PV210 supports 4 VIC */ - - s5pv210_clk_init(0, xusbxti_f, S3C_VA_SYS); - - /* All the VICs are fully populated. */ - vic[0] = ~0; - vic[1] = ~0; - vic[2] = ~0; - vic[3] = ~0; - - s5p_init_irq(vic, ARRAY_SIZE(vic)); -} - -struct bus_type s5pv210_subsys = { - .name = "s5pv210-core", - .dev_name = "s5pv210-core", -}; - -static struct device s5pv210_dev = { - .bus = &s5pv210_subsys, -}; - -static int __init s5pv210_core_init(void) -{ - return subsys_system_register(&s5pv210_subsys, NULL); -} -core_initcall(s5pv210_core_init); - -int __init s5pv210_init(void) -{ - printk(KERN_INFO "S5PV210: Initializing architecture\n"); - return device_register(&s5pv210_dev); -} - -/* uart registration process */ - -void __init s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); -} diff --git a/arch/arm/mach-s5pv210/common.h b/arch/arm/mach-s5pv210/common.h index 083ffe7b5079..0b694c798ad1 100644 --- a/arch/arm/mach-s5pv210/common.h +++ b/arch/arm/mach-s5pv210/common.h @@ -12,22 +12,5 @@ #ifndef __ARCH_ARM_MACH_S5PV210_COMMON_H #define __ARCH_ARM_MACH_S5PV210_COMMON_H -#include <linux/reboot.h> - -void s5pv210_clk_init(unsigned long xxti_f, unsigned long xusbxti_f, - void __iomem *reg_base); - -void s5pv210_init_io(struct map_desc *mach_desc, int size); -void s5pv210_init_irq(void); - -void s5pv210_register_clocks(void); -void s5pv210_setup_clocks(void); - -void s5pv210_restart(enum reboot_mode mode, const char *cmd); - -extern int s5pv210_init(void); -extern void s5pv210_map_io(void); -extern void s5pv210_init_clocks(int xtal); -extern void s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no); #endif /* __ARCH_ARM_MACH_S5PV210_COMMON_H */ diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c deleted file mode 100644 index 2d67361ef431..000000000000 --- a/arch/arm/mach-s5pv210/dev-audio.c +++ /dev/null @@ -1,246 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/dev-audio.c - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <plat/gpio-cfg.h> -#include <linux/platform_data/asoc-s3c.h> - -#include <mach/map.h> -#include <mach/dma.h> -#include <mach/irqs.h> - -#define S5PV210_AUDSS_INT_MEM (0xC0000000) - -static int s5pv210_cfg_i2s(struct platform_device *pdev) -{ - /* configure GPIO for i2s port */ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin_range(S5PV210_GPI(0), 7, S3C_GPIO_SFN(2)); - break; - case 1: - s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(2)); - break; - case 2: - s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(4)); - break; - default: - printk(KERN_ERR "Invalid Device %d\n", pdev->id); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata i2sv5_pdata = { - .cfg_gpio = s5pv210_cfg_i2s, - .type = { - .i2s = { - .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI - | QUIRK_NEED_RSTCLR, - .idma_addr = S5PV210_AUDSS_INT_MEM, - }, - }, -}; - -static struct resource s5pv210_iis0_resource[] = { - [0] = DEFINE_RES_MEM(S5PV210_PA_IIS0, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S0_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S0_RX), - [3] = DEFINE_RES_DMA(DMACH_I2S0S_TX), -}; - -struct platform_device s5pv210_device_iis0 = { - .name = "samsung-i2s", - .id = 0, - .num_resources = ARRAY_SIZE(s5pv210_iis0_resource), - .resource = s5pv210_iis0_resource, - .dev = { - .platform_data = &i2sv5_pdata, - }, -}; - -static struct s3c_audio_pdata i2sv3_pdata = { - .cfg_gpio = s5pv210_cfg_i2s, -}; - -static struct resource s5pv210_iis1_resource[] = { - [0] = DEFINE_RES_MEM(S5PV210_PA_IIS1, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S1_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S1_RX), -}; - -struct platform_device s5pv210_device_iis1 = { - .name = "samsung-i2s", - .id = 1, - .num_resources = ARRAY_SIZE(s5pv210_iis1_resource), - .resource = s5pv210_iis1_resource, - .dev = { - .platform_data = &i2sv3_pdata, - }, -}; - -static struct resource s5pv210_iis2_resource[] = { - [0] = DEFINE_RES_MEM(S5PV210_PA_IIS2, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_I2S2_TX), - [2] = DEFINE_RES_DMA(DMACH_I2S2_RX), -}; - -struct platform_device s5pv210_device_iis2 = { - .name = "samsung-i2s", - .id = 2, - .num_resources = ARRAY_SIZE(s5pv210_iis2_resource), - .resource = s5pv210_iis2_resource, - .dev = { - .platform_data = &i2sv3_pdata, - }, -}; - -/* PCM Controller platform_devices */ - -static int s5pv210_pcm_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin_range(S5PV210_GPI(0), 5, S3C_GPIO_SFN(3)); - break; - case 1: - s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(3)); - break; - case 2: - s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(2)); - break; - default: - printk(KERN_DEBUG "Invalid PCM Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata s3c_pcm_pdata = { - .cfg_gpio = s5pv210_pcm_cfg_gpio, -}; - -static struct resource s5pv210_pcm0_resource[] = { - [0] = DEFINE_RES_MEM(S5PV210_PA_PCM0, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_PCM0_TX), - [2] = DEFINE_RES_DMA(DMACH_PCM0_RX), -}; - -struct platform_device s5pv210_device_pcm0 = { - .name = "samsung-pcm", - .id = 0, - .num_resources = ARRAY_SIZE(s5pv210_pcm0_resource), - .resource = s5pv210_pcm0_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -static struct resource s5pv210_pcm1_resource[] = { - [0] = DEFINE_RES_MEM(S5PV210_PA_PCM1, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_PCM1_TX), - [2] = DEFINE_RES_DMA(DMACH_PCM1_RX), -}; - -struct platform_device s5pv210_device_pcm1 = { - .name = "samsung-pcm", - .id = 1, - .num_resources = ARRAY_SIZE(s5pv210_pcm1_resource), - .resource = s5pv210_pcm1_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -static struct resource s5pv210_pcm2_resource[] = { - [0] = DEFINE_RES_MEM(S5PV210_PA_PCM2, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_PCM2_TX), - [2] = DEFINE_RES_DMA(DMACH_PCM2_RX), -}; - -struct platform_device s5pv210_device_pcm2 = { - .name = "samsung-pcm", - .id = 2, - .num_resources = ARRAY_SIZE(s5pv210_pcm2_resource), - .resource = s5pv210_pcm2_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -/* AC97 Controller platform devices */ - -static int s5pv210_ac97_cfg_gpio(struct platform_device *pdev) -{ - return s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(4)); -} - -static struct resource s5pv210_ac97_resource[] = { - [0] = DEFINE_RES_MEM(S5PV210_PA_AC97, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT), - [2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN), - [3] = DEFINE_RES_DMA(DMACH_AC97_MICIN), - [4] = DEFINE_RES_IRQ(IRQ_AC97), -}; - -static struct s3c_audio_pdata s3c_ac97_pdata = { - .cfg_gpio = s5pv210_ac97_cfg_gpio, -}; - -static u64 s5pv210_ac97_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5pv210_device_ac97 = { - .name = "samsung-ac97", - .id = -1, - .num_resources = ARRAY_SIZE(s5pv210_ac97_resource), - .resource = s5pv210_ac97_resource, - .dev = { - .platform_data = &s3c_ac97_pdata, - .dma_mask = &s5pv210_ac97_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -/* S/PDIF Controller platform_device */ - -static int s5pv210_spdif_cfg_gpio(struct platform_device *pdev) -{ - s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 2, S3C_GPIO_SFN(3)); - - return 0; -} - -static struct resource s5pv210_spdif_resource[] = { - [0] = DEFINE_RES_MEM(S5PV210_PA_SPDIF, SZ_256), - [1] = DEFINE_RES_DMA(DMACH_SPDIF), -}; - -static struct s3c_audio_pdata samsung_spdif_pdata = { - .cfg_gpio = s5pv210_spdif_cfg_gpio, -}; - -static u64 s5pv210_spdif_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5pv210_device_spdif = { - .name = "samsung-spdif", - .id = -1, - .num_resources = ARRAY_SIZE(s5pv210_spdif_resource), - .resource = s5pv210_spdif_resource, - .dev = { - .platform_data = &samsung_spdif_pdata, - .dma_mask = &s5pv210_spdif_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c deleted file mode 100644 index b8337e248b09..000000000000 --- a/arch/arm/mach-s5pv210/dma.c +++ /dev/null @@ -1,130 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/dma.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/dma-mapping.h> -#include <linux/amba/bus.h> -#include <linux/amba/pl330.h> - -#include <asm/irq.h> -#include <plat/devs.h> -#include <plat/irqs.h> - -#include <mach/map.h> -#include <mach/irqs.h> -#include <mach/dma.h> - -static u8 pdma0_peri[] = { - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART1_RX, - DMACH_UART1_TX, - DMACH_UART2_RX, - DMACH_UART2_TX, - DMACH_UART3_RX, - DMACH_UART3_TX, - DMACH_MAX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S0S_TX, - DMACH_I2S1_RX, - DMACH_I2S1_TX, - DMACH_MAX, - DMACH_MAX, - DMACH_SPI0_RX, - DMACH_SPI0_TX, - DMACH_SPI1_RX, - DMACH_SPI1_TX, - DMACH_MAX, - DMACH_MAX, - DMACH_AC97_MICIN, - DMACH_AC97_PCMIN, - DMACH_AC97_PCMOUT, - DMACH_MAX, - DMACH_PWM, - DMACH_SPDIF, -}; - -static struct dma_pl330_platdata s5pv210_pdma0_pdata = { - .nr_valid_peri = ARRAY_SIZE(pdma0_peri), - .peri_id = pdma0_peri, -}; - -static AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330, - S5PV210_PA_PDMA0, {IRQ_PDMA0}, &s5pv210_pdma0_pdata); - -static u8 pdma1_peri[] = { - DMACH_UART0_RX, - DMACH_UART0_TX, - DMACH_UART1_RX, - DMACH_UART1_TX, - DMACH_UART2_RX, - DMACH_UART2_TX, - DMACH_UART3_RX, - DMACH_UART3_TX, - DMACH_MAX, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S0S_TX, - DMACH_I2S1_RX, - DMACH_I2S1_TX, - DMACH_I2S2_RX, - DMACH_I2S2_TX, - DMACH_SPI0_RX, - DMACH_SPI0_TX, - DMACH_SPI1_RX, - DMACH_SPI1_TX, - DMACH_MAX, - DMACH_MAX, - DMACH_PCM0_RX, - DMACH_PCM0_TX, - DMACH_PCM1_RX, - DMACH_PCM1_TX, - DMACH_MSM_REQ0, - DMACH_MSM_REQ1, - DMACH_MSM_REQ2, - DMACH_MSM_REQ3, - DMACH_PCM2_RX, - DMACH_PCM2_TX, -}; - -static struct dma_pl330_platdata s5pv210_pdma1_pdata = { - .nr_valid_peri = ARRAY_SIZE(pdma1_peri), - .peri_id = pdma1_peri, -}; - -static AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330, - S5PV210_PA_PDMA1, {IRQ_PDMA1}, &s5pv210_pdma1_pdata); - -static int __init s5pv210_dma_init(void) -{ - dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask); - dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask); - amba_device_register(&s5pv210_pdma0_device, &iomem_resource); - - dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask); - dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask); - amba_device_register(&s5pv210_pdma1_device, &iomem_resource); - - return 0; -} -arch_initcall(s5pv210_dma_init); diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c deleted file mode 100644 index cc37edacda26..000000000000 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ /dev/null @@ -1,687 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/mach-aquila.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/fb.h> -#include <linux/i2c.h> -#include <linux/i2c-gpio.h> -#include <linux/mfd/max8998.h> -#include <linux/mfd/wm8994/pdata.h> -#include <linux/regulator/fixed.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/gpio.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/setup.h> -#include <asm/mach-types.h> - -#include <video/samsung_fimd.h> -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/gpio-cfg.h> -#include <plat/devs.h> -#include <plat/cpu.h> -#include <plat/fb.h> -#include <plat/fimc-core.h> -#include <plat/sdhci.h> -#include <plat/samsung-time.h> - -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define AQUILA_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define AQUILA_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg aquila_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = AQUILA_UCON_DEFAULT, - .ulcon = AQUILA_ULCON_DEFAULT, - /* - * Actually UART0 can support 256 bytes fifo, but aquila board - * supports 128 bytes fifo because of initial chip bug - */ - .ufcon = AQUILA_UFCON_DEFAULT | - S5PV210_UFCON_TXTRIG128 | S5PV210_UFCON_RXTRIG128, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = AQUILA_UCON_DEFAULT, - .ulcon = AQUILA_ULCON_DEFAULT, - .ufcon = AQUILA_UFCON_DEFAULT | - S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = AQUILA_UCON_DEFAULT, - .ulcon = AQUILA_ULCON_DEFAULT, - .ufcon = AQUILA_UFCON_DEFAULT | - S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = AQUILA_UCON_DEFAULT, - .ulcon = AQUILA_ULCON_DEFAULT, - .ufcon = AQUILA_UFCON_DEFAULT | - S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16, - }, -}; - -/* Frame Buffer */ -static struct s3c_fb_pd_win aquila_fb_win0 = { - .max_bpp = 32, - .default_bpp = 16, - .xres = 480, - .yres = 800, -}; - -static struct s3c_fb_pd_win aquila_fb_win1 = { - .max_bpp = 32, - .default_bpp = 16, - .xres = 480, - .yres = 800, -}; - -static struct fb_videomode aquila_lcd_timing = { - .left_margin = 16, - .right_margin = 16, - .upper_margin = 3, - .lower_margin = 28, - .hsync_len = 2, - .vsync_len = 2, - .xres = 480, - .yres = 800, -}; - -static struct s3c_fb_platdata aquila_lcd_pdata __initdata = { - .win[0] = &aquila_fb_win0, - .win[1] = &aquila_fb_win1, - .vtiming = &aquila_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | - VIDCON1_INV_VCLK | VIDCON1_INV_VDEN, - .setup_gpio = s5pv210_fb_gpio_setup_24bpp, -}; - -/* MAX8998 regulators */ -#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) - -static struct regulator_init_data aquila_ldo2_data = { - .constraints = { - .name = "VALIVE_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_init_data aquila_ldo3_data = { - .constraints = { - .name = "VUSB+MIPI_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo4_data = { - .constraints = { - .name = "VDAC_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - }, -}; - -static struct regulator_init_data aquila_ldo5_data = { - .constraints = { - .name = "VTF_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - }, -}; - -static struct regulator_init_data aquila_ldo6_data = { - .constraints = { - .name = "VCC_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - }, -}; - -static struct regulator_init_data aquila_ldo7_data = { - .constraints = { - .name = "VCC_3.0V", - .min_uV = 3000000, - .max_uV = 3000000, - .apply_uV = 1, - .boot_on = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo8_data = { - .constraints = { - .name = "VUSB+VADC_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo9_data = { - .constraints = { - .name = "VCC+VCAM_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo10_data = { - .constraints = { - .name = "VPLL_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .boot_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo11_data = { - .constraints = { - .name = "CAM_IO_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo12_data = { - .constraints = { - .name = "CAM_ISP_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo13_data = { - .constraints = { - .name = "CAM_A_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo14_data = { - .constraints = { - .name = "CAM_CIF_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo15_data = { - .constraints = { - .name = "CAM_AF_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo16_data = { - .constraints = { - .name = "VMIPI_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data aquila_ldo17_data = { - .constraints = { - .name = "CAM_8M_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -/* BUCK */ -static struct regulator_consumer_supply buck1_consumer = - REGULATOR_SUPPLY("vddarm", NULL); - -static struct regulator_consumer_supply buck2_consumer = - REGULATOR_SUPPLY("vddint", NULL); - -static struct regulator_init_data aquila_buck1_data = { - .constraints = { - .name = "VARM_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &buck1_consumer, -}; - -static struct regulator_init_data aquila_buck2_data = { - .constraints = { - .name = "VINT_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &buck2_consumer, -}; - -static struct regulator_init_data aquila_buck3_data = { - .constraints = { - .name = "VCC_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_init_data aquila_buck4_data = { - .constraints = { - .name = "CAM_CORE_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct max8998_regulator_data aquila_regulators[] = { - { MAX8998_LDO2, &aquila_ldo2_data }, - { MAX8998_LDO3, &aquila_ldo3_data }, - { MAX8998_LDO4, &aquila_ldo4_data }, - { MAX8998_LDO5, &aquila_ldo5_data }, - { MAX8998_LDO6, &aquila_ldo6_data }, - { MAX8998_LDO7, &aquila_ldo7_data }, - { MAX8998_LDO8, &aquila_ldo8_data }, - { MAX8998_LDO9, &aquila_ldo9_data }, - { MAX8998_LDO10, &aquila_ldo10_data }, - { MAX8998_LDO11, &aquila_ldo11_data }, - { MAX8998_LDO12, &aquila_ldo12_data }, - { MAX8998_LDO13, &aquila_ldo13_data }, - { MAX8998_LDO14, &aquila_ldo14_data }, - { MAX8998_LDO15, &aquila_ldo15_data }, - { MAX8998_LDO16, &aquila_ldo16_data }, - { MAX8998_LDO17, &aquila_ldo17_data }, - { MAX8998_BUCK1, &aquila_buck1_data }, - { MAX8998_BUCK2, &aquila_buck2_data }, - { MAX8998_BUCK3, &aquila_buck3_data }, - { MAX8998_BUCK4, &aquila_buck4_data }, -}; - -static struct max8998_platform_data aquila_max8998_pdata = { - .num_regulators = ARRAY_SIZE(aquila_regulators), - .regulators = aquila_regulators, - .buck1_set1 = S5PV210_GPH0(3), - .buck1_set2 = S5PV210_GPH0(4), - .buck2_set3 = S5PV210_GPH0(5), - .buck1_voltage = { 1200000, 1200000, 1200000, 1200000 }, - .buck2_voltage = { 1200000, 1200000 }, -}; -#endif - -static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = { - REGULATOR_SUPPLY("DBVDD", "5-001a"), - REGULATOR_SUPPLY("AVDD2", "5-001a"), - REGULATOR_SUPPLY("CPVDD", "5-001a"), -}; - -static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = { - REGULATOR_SUPPLY("SPKVDD1", "5-001a"), - REGULATOR_SUPPLY("SPKVDD2", "5-001a"), -}; - -static struct regulator_init_data wm8994_fixed_voltage0_init_data = { - .constraints = { - .always_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies), - .consumer_supplies = wm8994_fixed_voltage0_supplies, -}; - -static struct regulator_init_data wm8994_fixed_voltage1_init_data = { - .constraints = { - .always_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies), - .consumer_supplies = wm8994_fixed_voltage1_supplies, -}; - -static struct fixed_voltage_config wm8994_fixed_voltage0_config = { - .supply_name = "VCC_1.8V_PDA", - .microvolts = 1800000, - .gpio = -EINVAL, - .init_data = &wm8994_fixed_voltage0_init_data, -}; - -static struct fixed_voltage_config wm8994_fixed_voltage1_config = { - .supply_name = "V_BAT", - .microvolts = 3700000, - .gpio = -EINVAL, - .init_data = &wm8994_fixed_voltage1_init_data, -}; - -static struct platform_device wm8994_fixed_voltage0 = { - .name = "reg-fixed-voltage", - .id = 0, - .dev = { - .platform_data = &wm8994_fixed_voltage0_config, - }, -}; - -static struct platform_device wm8994_fixed_voltage1 = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &wm8994_fixed_voltage1_config, - }, -}; - -static struct regulator_consumer_supply wm8994_avdd1_supply = - REGULATOR_SUPPLY("AVDD1", "5-001a"); - -static struct regulator_consumer_supply wm8994_dcvdd_supply = - REGULATOR_SUPPLY("DCVDD", "5-001a"); - -static struct regulator_init_data wm8994_ldo1_data = { - .constraints = { - .name = "AVDD1_3.0V", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &wm8994_avdd1_supply, -}; - -static struct regulator_init_data wm8994_ldo2_data = { - .constraints = { - .name = "DCVDD_1.0V", - }, - .num_consumer_supplies = 1, - .consumer_supplies = &wm8994_dcvdd_supply, -}; - -static struct wm8994_pdata wm8994_platform_data = { - /* configure gpio1 function: 0x0001(Logic level input/output) */ - .gpio_defaults[0] = 0x0001, - /* configure gpio3/4/5/7 function for AIF2 voice */ - .gpio_defaults[2] = 0x8100, - .gpio_defaults[3] = 0x8100, - .gpio_defaults[4] = 0x8100, - .gpio_defaults[6] = 0x0100, - /* configure gpio8/9/10/11 function for AIF3 BT */ - .gpio_defaults[7] = 0x8100, - .gpio_defaults[8] = 0x0100, - .gpio_defaults[9] = 0x0100, - .gpio_defaults[10] = 0x0100, - .ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */ - .ldo[1] = { 0, &wm8994_ldo2_data }, -}; - -/* GPIO I2C PMIC */ -#define AP_I2C_GPIO_PMIC_BUS_4 4 -static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = { - .sda_pin = S5PV210_GPJ4(0), /* XMSMCSN */ - .scl_pin = S5PV210_GPJ4(3), /* XMSMIRQN */ -}; - -static struct platform_device aquila_i2c_gpio_pmic = { - .name = "i2c-gpio", - .id = AP_I2C_GPIO_PMIC_BUS_4, - .dev = { - .platform_data = &aquila_i2c_gpio_pmic_data, - }, -}; - -static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = { -#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) - { - /* 0xCC when SRAD = 0 */ - I2C_BOARD_INFO("max8998", 0xCC >> 1), - .platform_data = &aquila_max8998_pdata, - }, -#endif -}; - -/* GPIO I2C AP 1.8V */ -#define AP_I2C_GPIO_BUS_5 5 -static struct i2c_gpio_platform_data aquila_i2c_gpio5_data = { - .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */ - .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */ -}; - -static struct platform_device aquila_i2c_gpio5 = { - .name = "i2c-gpio", - .id = AP_I2C_GPIO_BUS_5, - .dev = { - .platform_data = &aquila_i2c_gpio5_data, - }, -}; - -static struct i2c_board_info i2c_gpio5_devs[] __initdata = { - { - /* CS/ADDR = low 0x34 (FYI: high = 0x36) */ - I2C_BOARD_INFO("wm8994", 0x1a), - .platform_data = &wm8994_platform_data, - }, -}; - -/* PMIC Power button */ -static struct gpio_keys_button aquila_gpio_keys_table[] = { - { - .code = KEY_POWER, - .gpio = S5PV210_GPH2(6), - .desc = "gpio-keys: KEY_POWER", - .type = EV_KEY, - .active_low = 1, - .wakeup = 1, - .debounce_interval = 1, - }, -}; - -static struct gpio_keys_platform_data aquila_gpio_keys_data = { - .buttons = aquila_gpio_keys_table, - .nbuttons = ARRAY_SIZE(aquila_gpio_keys_table), -}; - -static struct platform_device aquila_device_gpiokeys = { - .name = "gpio-keys", - .dev = { - .platform_data = &aquila_gpio_keys_data, - }, -}; - -static void __init aquila_pmic_init(void) -{ - /* AP_PMIC_IRQ: EINT7 */ - s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP); - - /* nPower: EINT22 */ - s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP); -} - -/* MoviNAND */ -static struct s3c_sdhci_platdata aquila_hsmmc0_data __initdata = { - .max_width = 4, - .cd_type = S3C_SDHCI_CD_PERMANENT, -}; - -/* Wireless LAN */ -static struct s3c_sdhci_platdata aquila_hsmmc1_data __initdata = { - .max_width = 4, - .cd_type = S3C_SDHCI_CD_EXTERNAL, - /* ext_cd_{init,cleanup} callbacks will be added later */ -}; - -/* External Flash */ -#define AQUILA_EXT_FLASH_EN S5PV210_MP05(4) -#define AQUILA_EXT_FLASH_CD S5PV210_GPH3(4) -static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = { - .max_width = 4, - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = AQUILA_EXT_FLASH_CD, - .ext_cd_gpio_invert = 1, -}; - -static void aquila_setup_sdhci(void) -{ - gpio_request_one(AQUILA_EXT_FLASH_EN, GPIOF_OUT_INIT_HIGH, "FLASH_EN"); - - s3c_sdhci0_set_platdata(&aquila_hsmmc0_data); - s3c_sdhci1_set_platdata(&aquila_hsmmc1_data); - s3c_sdhci2_set_platdata(&aquila_hsmmc2_data); -}; - -/* Audio device */ -static struct platform_device aquila_device_audio = { - .name = "smdk-audio", - .id = -1, -}; - -static struct platform_device *aquila_devices[] __initdata = { - &aquila_i2c_gpio_pmic, - &aquila_i2c_gpio5, - &aquila_device_gpiokeys, - &aquila_device_audio, - &s3c_device_fb, - &s5p_device_onenand, - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_hsmmc2, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5p_device_fimc_md, - &s5pv210_device_iis0, - &wm8994_fixed_voltage0, - &wm8994_fixed_voltage1, -}; - -static void __init aquila_sound_init(void) -{ - unsigned int gpio; - - /* CODEC_XTAL_EN - * - * The Aquila board have a oscillator which provide main clock - * to WM8994 codec. The oscillator provide 24MHz clock to WM8994 - * clock. Set gpio setting of "CODEC_XTAL_EN" to enable a oscillator. - * */ - gpio = S5PV210_GPH3(2); /* XEINT_26 */ - gpio_request(gpio, "CODEC_XTAL_EN"); - s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - - /* Ths main clock of WM8994 codec uses the output of CLKOUT pin. - * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS) - * because it needs 24MHz clock to operate WM8994 codec. - */ - __raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS); -} - -static void __init aquila_map_io(void) -{ - s5pv210_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); - s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); -} - -static void __init aquila_machine_init(void) -{ - /* PMIC */ - aquila_pmic_init(); - i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs, - ARRAY_SIZE(i2c_gpio_pmic_devs)); - /* SDHCI */ - aquila_setup_sdhci(); - - s3c_fimc_setname(0, "s5p-fimc"); - s3c_fimc_setname(1, "s5p-fimc"); - s3c_fimc_setname(2, "s5p-fimc"); - - /* SOUND */ - aquila_sound_init(); - i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs, - ARRAY_SIZE(i2c_gpio5_devs)); - - /* FB */ - s3c_fb_set_platdata(&aquila_lcd_pdata); - - platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices)); -} - -MACHINE_START(AQUILA, "Aquila") - /* Maintainers: - Marek Szyprowski <m.szyprowski@samsung.com> - Kyungmin Park <kyungmin.park@samsung.com> */ - .atag_offset = 0x100, - .init_irq = s5pv210_init_irq, - .map_io = aquila_map_io, - .init_machine = aquila_machine_init, - .init_time = samsung_timer_init, - .restart = s5pv210_restart, -MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c deleted file mode 100644 index 315926f0b5d3..000000000000 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ /dev/null @@ -1,915 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/mach-goni.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/fb.h> -#include <linux/i2c.h> -#include <linux/i2c-gpio.h> -#include <linux/i2c/atmel_mxt_ts.h> -#include <linux/mfd/max8998.h> -#include <linux/mfd/wm8994/pdata.h> -#include <linux/regulator/fixed.h> -#include <linux/spi/spi.h> -#include <linux/spi/spi_gpio.h> -#include <linux/lcd.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/gpio.h> -#include <linux/mmc/host.h> -#include <linux/interrupt.h> -#include <linux/platform_data/s3c-hsotg.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/setup.h> -#include <asm/mach-types.h> - -#include <video/samsung_fimd.h> -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/gpio-cfg.h> -#include <plat/devs.h> -#include <plat/cpu.h> -#include <plat/fb.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/keypad.h> -#include <plat/sdhci.h> -#include <plat/samsung-time.h> -#include <plat/mfc.h> - -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define GONI_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define GONI_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = GONI_UCON_DEFAULT, - .ulcon = GONI_ULCON_DEFAULT, - .ufcon = GONI_UFCON_DEFAULT | - S5PV210_UFCON_TXTRIG256 | S5PV210_UFCON_RXTRIG256, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = GONI_UCON_DEFAULT, - .ulcon = GONI_ULCON_DEFAULT, - .ufcon = GONI_UFCON_DEFAULT | - S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = GONI_UCON_DEFAULT, - .ulcon = GONI_ULCON_DEFAULT, - .ufcon = GONI_UFCON_DEFAULT | - S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = GONI_UCON_DEFAULT, - .ulcon = GONI_ULCON_DEFAULT, - .ufcon = GONI_UFCON_DEFAULT | - S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16, - }, -}; - -/* Frame Buffer */ -static struct s3c_fb_pd_win goni_fb_win0 = { - .max_bpp = 32, - .default_bpp = 16, - .xres = 480, - .yres = 800, - .virtual_x = 480, - .virtual_y = 2 * 800, -}; - -static struct fb_videomode goni_lcd_timing = { - .left_margin = 16, - .right_margin = 16, - .upper_margin = 2, - .lower_margin = 28, - .hsync_len = 2, - .vsync_len = 1, - .xres = 480, - .yres = 800, - .refresh = 55, -}; - -static struct s3c_fb_platdata goni_lcd_pdata __initdata = { - .win[0] = &goni_fb_win0, - .vtiming = &goni_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | - VIDCON0_CLKSEL_LCD, - .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN - | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .setup_gpio = s5pv210_fb_gpio_setup_24bpp, -}; - -static int lcd_power_on(struct lcd_device *ld, int enable) -{ - return 1; -} - -static int reset_lcd(struct lcd_device *ld) -{ - static unsigned int first = 1; - int reset_gpio = -1; - - reset_gpio = S5PV210_MP05(5); - - if (first) { - gpio_request(reset_gpio, "MLCD_RST"); - first = 0; - } - - gpio_direction_output(reset_gpio, 1); - return 1; -} - -static struct lcd_platform_data goni_lcd_platform_data = { - .reset = reset_lcd, - .power_on = lcd_power_on, - .lcd_enabled = 0, - .reset_delay = 120, /* 120ms */ - .power_on_delay = 25, /* 25ms */ - .power_off_delay = 200, /* 200ms */ -}; - -#define LCD_BUS_NUM 3 -static struct spi_board_info spi_board_info[] __initdata = { - { - .modalias = "s6e63m0", - .platform_data = &goni_lcd_platform_data, - .max_speed_hz = 1200000, - .bus_num = LCD_BUS_NUM, - .chip_select = 0, - .mode = SPI_MODE_3, - .controller_data = (void *)S5PV210_MP01(1), /* DISPLAY_CS */ - }, -}; - -static struct spi_gpio_platform_data lcd_spi_gpio_data = { - .sck = S5PV210_MP04(1), /* DISPLAY_CLK */ - .mosi = S5PV210_MP04(3), /* DISPLAY_SI */ - .miso = SPI_GPIO_NO_MISO, - .num_chipselect = 1, -}; - -static struct platform_device goni_spi_gpio = { - .name = "spi_gpio", - .id = LCD_BUS_NUM, - .dev = { - .parent = &s3c_device_fb.dev, - .platform_data = &lcd_spi_gpio_data, - }, -}; - -/* KEYPAD */ -static uint32_t keymap[] __initdata = { - /* KEY(row, col, keycode) */ - KEY(0, 1, KEY_MENU), /* Send */ - KEY(0, 2, KEY_BACK), /* End */ - KEY(1, 1, KEY_CONFIG), /* Half shot */ - KEY(1, 2, KEY_VOLUMEUP), - KEY(2, 1, KEY_CAMERA), /* Full shot */ - KEY(2, 2, KEY_VOLUMEDOWN), -}; - -static struct matrix_keymap_data keymap_data __initdata = { - .keymap = keymap, - .keymap_size = ARRAY_SIZE(keymap), -}; - -static struct samsung_keypad_platdata keypad_data __initdata = { - .keymap_data = &keymap_data, - .rows = 3, - .cols = 3, -}; - -/* Radio */ -static struct i2c_board_info i2c1_devs[] __initdata = { - { - I2C_BOARD_INFO("si470x", 0x10), - }, -}; - -static void __init goni_radio_init(void) -{ - int gpio; - - gpio = S5PV210_GPJ2(4); /* XMSMDATA_4 */ - gpio_request(gpio, "FM_INT"); - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); - i2c1_devs[0].irq = gpio_to_irq(gpio); - - gpio = S5PV210_GPJ2(5); /* XMSMDATA_5 */ - gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "FM_RST"); -} - -/* TSP */ -static struct mxt_platform_data qt602240_platform_data = { - .irqflags = IRQF_TRIGGER_FALLING, -}; - -static struct s3c2410_platform_i2c i2c2_data __initdata = { - .flags = 0, - .bus_num = 2, - .slave_addr = 0x10, - .frequency = 400 * 1000, - .sda_delay = 100, -}; - -static struct i2c_board_info i2c2_devs[] __initdata = { - { - I2C_BOARD_INFO("qt602240_ts", 0x4a), - .platform_data = &qt602240_platform_data, - }, -}; - -static void __init goni_tsp_init(void) -{ - int gpio; - - gpio = S5PV210_GPJ1(3); /* XMSMADDR_11 */ - gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON"); - gpio_export(gpio, 0); - - gpio = S5PV210_GPJ0(5); /* XMSMADDR_5 */ - gpio_request(gpio, "TSP_INT"); - - s5p_register_gpio_interrupt(gpio); - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); - i2c2_devs[0].irq = gpio_to_irq(gpio); -} - -/* USB OTG */ -static struct s3c_hsotg_plat goni_hsotg_pdata; - -/* MAX8998 regulators */ -#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) - -static struct regulator_consumer_supply goni_ldo3_consumers[] = { - REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), -}; - -static struct regulator_consumer_supply goni_ldo5_consumers[] = { - REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), -}; - -static struct regulator_consumer_supply goni_ldo8_consumers[] = { - REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), - REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"), -}; - -static struct regulator_consumer_supply goni_ldo11_consumers[] = { - REGULATOR_SUPPLY("vddio", "0-0030"), /* "CAM_IO_2.8V" */ -}; - -static struct regulator_consumer_supply goni_ldo13_consumers[] = { - REGULATOR_SUPPLY("vdda", "0-0030"), /* "CAM_A_2.8V" */ -}; - -static struct regulator_consumer_supply goni_ldo14_consumers[] = { - REGULATOR_SUPPLY("vdd_core", "0-0030"), /* "CAM_CIF_1.8V" */ -}; - -static struct regulator_init_data goni_ldo2_data = { - .constraints = { - .name = "VALIVE_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .always_on = 1, - .state_mem = { - .enabled = 1, - }, - }, -}; - -static struct regulator_init_data goni_ldo3_data = { - .constraints = { - .name = "VUSB+MIPI_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(goni_ldo3_consumers), - .consumer_supplies = goni_ldo3_consumers, -}; - -static struct regulator_init_data goni_ldo4_data = { - .constraints = { - .name = "VDAC_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - }, -}; - -static struct regulator_init_data goni_ldo5_data = { - .constraints = { - .name = "VTF_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(goni_ldo5_consumers), - .consumer_supplies = goni_ldo5_consumers, -}; - -static struct regulator_init_data goni_ldo6_data = { - .constraints = { - .name = "VCC_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - }, -}; - -static struct regulator_init_data goni_ldo7_data = { - .constraints = { - .name = "VLCD_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct regulator_init_data goni_ldo8_data = { - .constraints = { - .name = "VUSB+VADC_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(goni_ldo8_consumers), - .consumer_supplies = goni_ldo8_consumers, -}; - -static struct regulator_init_data goni_ldo9_data = { - .constraints = { - .name = "VCC+VCAM_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - }, -}; - -static struct regulator_init_data goni_ldo10_data = { - .constraints = { - .name = "VPLL_1.1V", - .min_uV = 1100000, - .max_uV = 1100000, - .apply_uV = 1, - .boot_on = 1, - }, -}; - -static struct regulator_init_data goni_ldo11_data = { - .constraints = { - .name = "CAM_IO_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(goni_ldo11_consumers), - .consumer_supplies = goni_ldo11_consumers, -}; - -static struct regulator_init_data goni_ldo12_data = { - .constraints = { - .name = "CAM_ISP_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - }, -}; - -static struct regulator_init_data goni_ldo13_data = { - .constraints = { - .name = "CAM_A_2.8V", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(goni_ldo13_consumers), - .consumer_supplies = goni_ldo13_consumers, -}; - -static struct regulator_init_data goni_ldo14_data = { - .constraints = { - .name = "CAM_CIF_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(goni_ldo14_consumers), - .consumer_supplies = goni_ldo14_consumers, -}; - -static struct regulator_init_data goni_ldo15_data = { - .constraints = { - .name = "CAM_AF_3.3V", - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = 1, - }, -}; - -static struct regulator_init_data goni_ldo16_data = { - .constraints = { - .name = "VMIPI_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - }, -}; - -static struct regulator_init_data goni_ldo17_data = { - .constraints = { - .name = "VCC_3.0V_LCD", - .min_uV = 3000000, - .max_uV = 3000000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -/* BUCK */ -static struct regulator_consumer_supply buck1_consumer = - REGULATOR_SUPPLY("vddarm", NULL); - -static struct regulator_consumer_supply buck2_consumer = - REGULATOR_SUPPLY("vddint", NULL); - -static struct regulator_consumer_supply buck3_consumer = - REGULATOR_SUPPLY("vdet", "s5p-sdo"); - - -static struct regulator_init_data goni_buck1_data = { - .constraints = { - .name = "VARM_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &buck1_consumer, -}; - -static struct regulator_init_data goni_buck2_data = { - .constraints = { - .name = "VINT_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &buck2_consumer, -}; - -static struct regulator_init_data goni_buck3_data = { - .constraints = { - .name = "VCC_1.8V", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .state_mem = { - .enabled = 1, - }, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &buck3_consumer, -}; - -static struct regulator_init_data goni_buck4_data = { - .constraints = { - .name = "CAM_CORE_1.2V", - .min_uV = 1200000, - .max_uV = 1200000, - .apply_uV = 1, - .always_on = 1, - }, -}; - -static struct max8998_regulator_data goni_regulators[] = { - { MAX8998_LDO2, &goni_ldo2_data }, - { MAX8998_LDO3, &goni_ldo3_data }, - { MAX8998_LDO4, &goni_ldo4_data }, - { MAX8998_LDO5, &goni_ldo5_data }, - { MAX8998_LDO6, &goni_ldo6_data }, - { MAX8998_LDO7, &goni_ldo7_data }, - { MAX8998_LDO8, &goni_ldo8_data }, - { MAX8998_LDO9, &goni_ldo9_data }, - { MAX8998_LDO10, &goni_ldo10_data }, - { MAX8998_LDO11, &goni_ldo11_data }, - { MAX8998_LDO12, &goni_ldo12_data }, - { MAX8998_LDO13, &goni_ldo13_data }, - { MAX8998_LDO14, &goni_ldo14_data }, - { MAX8998_LDO15, &goni_ldo15_data }, - { MAX8998_LDO16, &goni_ldo16_data }, - { MAX8998_LDO17, &goni_ldo17_data }, - { MAX8998_BUCK1, &goni_buck1_data }, - { MAX8998_BUCK2, &goni_buck2_data }, - { MAX8998_BUCK3, &goni_buck3_data }, - { MAX8998_BUCK4, &goni_buck4_data }, -}; - -static struct max8998_platform_data goni_max8998_pdata = { - .num_regulators = ARRAY_SIZE(goni_regulators), - .regulators = goni_regulators, - .buck1_set1 = S5PV210_GPH0(3), - .buck1_set2 = S5PV210_GPH0(4), - .buck2_set3 = S5PV210_GPH0(5), - .buck1_voltage = { 1200000, 1200000, 1200000, 1200000 }, - .buck2_voltage = { 1200000, 1200000 }, -}; -#endif - -static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = { - REGULATOR_SUPPLY("DBVDD", "5-001a"), - REGULATOR_SUPPLY("AVDD2", "5-001a"), - REGULATOR_SUPPLY("CPVDD", "5-001a"), -}; - -static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = { - REGULATOR_SUPPLY("SPKVDD1", "5-001a"), - REGULATOR_SUPPLY("SPKVDD2", "5-001a"), -}; - -static struct regulator_init_data wm8994_fixed_voltage0_init_data = { - .constraints = { - .always_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies), - .consumer_supplies = wm8994_fixed_voltage0_supplies, -}; - -static struct regulator_init_data wm8994_fixed_voltage1_init_data = { - .constraints = { - .always_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies), - .consumer_supplies = wm8994_fixed_voltage1_supplies, -}; - -static struct fixed_voltage_config wm8994_fixed_voltage0_config = { - .supply_name = "VCC_1.8V_PDA", - .microvolts = 1800000, - .gpio = -EINVAL, - .init_data = &wm8994_fixed_voltage0_init_data, -}; - -static struct fixed_voltage_config wm8994_fixed_voltage1_config = { - .supply_name = "V_BAT", - .microvolts = 3700000, - .gpio = -EINVAL, - .init_data = &wm8994_fixed_voltage1_init_data, -}; - -static struct platform_device wm8994_fixed_voltage0 = { - .name = "reg-fixed-voltage", - .id = 0, - .dev = { - .platform_data = &wm8994_fixed_voltage0_config, - }, -}; - -static struct platform_device wm8994_fixed_voltage1 = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &wm8994_fixed_voltage1_config, - }, -}; - -static struct regulator_consumer_supply wm8994_avdd1_supply = - REGULATOR_SUPPLY("AVDD1", "5-001a"); - -static struct regulator_consumer_supply wm8994_dcvdd_supply = - REGULATOR_SUPPLY("DCVDD", "5-001a"); - -static struct regulator_init_data wm8994_ldo1_data = { - .constraints = { - .name = "AVDD1_3.0V", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &wm8994_avdd1_supply, -}; - -static struct regulator_init_data wm8994_ldo2_data = { - .constraints = { - .name = "DCVDD_1.0V", - }, - .num_consumer_supplies = 1, - .consumer_supplies = &wm8994_dcvdd_supply, -}; - -static struct wm8994_pdata wm8994_platform_data = { - /* configure gpio1 function: 0x0001(Logic level input/output) */ - .gpio_defaults[0] = 0x0001, - /* configure gpio3/4/5/7 function for AIF2 voice */ - .gpio_defaults[2] = 0x8100, - .gpio_defaults[3] = 0x8100, - .gpio_defaults[4] = 0x8100, - .gpio_defaults[6] = 0x0100, - /* configure gpio8/9/10/11 function for AIF3 BT */ - .gpio_defaults[7] = 0x8100, - .gpio_defaults[8] = 0x0100, - .gpio_defaults[9] = 0x0100, - .gpio_defaults[10] = 0x0100, - .ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */ - .ldo[1] = { 0, &wm8994_ldo2_data }, -}; - -/* GPIO I2C PMIC */ -#define AP_I2C_GPIO_PMIC_BUS_4 4 -static struct i2c_gpio_platform_data goni_i2c_gpio_pmic_data = { - .sda_pin = S5PV210_GPJ4(0), /* XMSMCSN */ - .scl_pin = S5PV210_GPJ4(3), /* XMSMIRQN */ -}; - -static struct platform_device goni_i2c_gpio_pmic = { - .name = "i2c-gpio", - .id = AP_I2C_GPIO_PMIC_BUS_4, - .dev = { - .platform_data = &goni_i2c_gpio_pmic_data, - }, -}; - -static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = { -#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) - { - /* 0xCC when SRAD = 0 */ - I2C_BOARD_INFO("max8998", 0xCC >> 1), - .platform_data = &goni_max8998_pdata, - }, -#endif -}; - -/* GPIO I2C AP 1.8V */ -#define AP_I2C_GPIO_BUS_5 5 -static struct i2c_gpio_platform_data goni_i2c_gpio5_data = { - .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */ - .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */ -}; - -static struct platform_device goni_i2c_gpio5 = { - .name = "i2c-gpio", - .id = AP_I2C_GPIO_BUS_5, - .dev = { - .platform_data = &goni_i2c_gpio5_data, - }, -}; - -static struct i2c_board_info i2c_gpio5_devs[] __initdata = { - { - /* CS/ADDR = low 0x34 (FYI: high = 0x36) */ - I2C_BOARD_INFO("wm8994", 0x1a), - .platform_data = &wm8994_platform_data, - }, -}; - -/* PMIC Power button */ -static struct gpio_keys_button goni_gpio_keys_table[] = { - { - .code = KEY_POWER, - .gpio = S5PV210_GPH2(6), - .desc = "gpio-keys: KEY_POWER", - .type = EV_KEY, - .active_low = 1, - .wakeup = 1, - .debounce_interval = 1, - }, -}; - -static struct gpio_keys_platform_data goni_gpio_keys_data = { - .buttons = goni_gpio_keys_table, - .nbuttons = ARRAY_SIZE(goni_gpio_keys_table), -}; - -static struct platform_device goni_device_gpiokeys = { - .name = "gpio-keys", - .dev = { - .platform_data = &goni_gpio_keys_data, - }, -}; - -static void __init goni_pmic_init(void) -{ - /* AP_PMIC_IRQ: EINT7 */ - s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP); - - /* nPower: EINT22 */ - s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf)); - s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP); -} - -/* MoviNAND */ -static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = { - .max_width = 4, - .cd_type = S3C_SDHCI_CD_PERMANENT, -}; - -/* Wireless LAN */ -static struct s3c_sdhci_platdata goni_hsmmc1_data __initdata = { - .max_width = 4, - .cd_type = S3C_SDHCI_CD_EXTERNAL, - /* ext_cd_{init,cleanup} callbacks will be added later */ -}; - -/* External Flash */ -#define GONI_EXT_FLASH_EN S5PV210_MP05(4) -#define GONI_EXT_FLASH_CD S5PV210_GPH3(4) -static struct s3c_sdhci_platdata goni_hsmmc2_data __initdata = { - .max_width = 4, - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = GONI_EXT_FLASH_CD, - .ext_cd_gpio_invert = 1, -}; - -static struct regulator_consumer_supply mmc2_supplies[] = { - REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), -}; - -static struct regulator_init_data mmc2_fixed_voltage_init_data = { - .constraints = { - .name = "V_TF_2.8V", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(mmc2_supplies), - .consumer_supplies = mmc2_supplies, -}; - -static struct fixed_voltage_config mmc2_fixed_voltage_config = { - .supply_name = "EXT_FLASH_EN", - .microvolts = 2800000, - .gpio = GONI_EXT_FLASH_EN, - .enable_high = true, - .init_data = &mmc2_fixed_voltage_init_data, -}; - -static struct platform_device mmc2_fixed_voltage = { - .name = "reg-fixed-voltage", - .id = 2, - .dev = { - .platform_data = &mmc2_fixed_voltage_config, - }, -}; - -static void goni_setup_sdhci(void) -{ - s3c_sdhci0_set_platdata(&goni_hsmmc0_data); - s3c_sdhci1_set_platdata(&goni_hsmmc1_data); - s3c_sdhci2_set_platdata(&goni_hsmmc2_data); -}; - -/* Audio device */ -static struct platform_device goni_device_audio = { - .name = "smdk-audio", - .id = -1, -}; - -static struct platform_device *goni_devices[] __initdata = { - &s3c_device_fb, - &s5p_device_onenand, - &goni_spi_gpio, - &goni_i2c_gpio_pmic, - &goni_i2c_gpio5, - &goni_device_audio, - &mmc2_fixed_voltage, - &goni_device_gpiokeys, - &s5p_device_mfc, - &s5p_device_mfc_l, - &s5p_device_mfc_r, - &s5p_device_mixer, - &s5p_device_sdo, - &s3c_device_i2c0, - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_hsmmc2, - &s5pv210_device_iis0, - &s3c_device_usb_hsotg, - &samsung_device_keypad, - &s3c_device_i2c1, - &s3c_device_i2c2, - &wm8994_fixed_voltage0, - &wm8994_fixed_voltage1, -}; - -static void __init goni_sound_init(void) -{ - /* Ths main clock of WM8994 codec uses the output of CLKOUT pin. - * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS) - * because it needs 24MHz clock to operate WM8994 codec. - */ - __raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS); -} - -static void __init goni_map_io(void) -{ - s5pv210_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); - s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); -} - -static void __init goni_reserve(void) -{ - s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); -} - -static void __init goni_machine_init(void) -{ - /* Radio: call before I2C 1 registeration */ - goni_radio_init(); - - /* I2C0 */ - s3c_i2c0_set_platdata(NULL); - - /* I2C1 */ - s3c_i2c1_set_platdata(NULL); - i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); - - /* TSP: call before I2C 2 registeration */ - goni_tsp_init(); - - /* I2C2 */ - s3c_i2c2_set_platdata(&i2c2_data); - i2c_register_board_info(2, i2c2_devs, ARRAY_SIZE(i2c2_devs)); - - /* PMIC */ - goni_pmic_init(); - i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs, - ARRAY_SIZE(i2c_gpio_pmic_devs)); - /* SDHCI */ - goni_setup_sdhci(); - - /* SOUND */ - goni_sound_init(); - i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs, - ARRAY_SIZE(i2c_gpio5_devs)); - - /* FB */ - s3c_fb_set_platdata(&goni_lcd_pdata); - - s3c_hsotg_set_platdata(&goni_hsotg_pdata); - - /* SPI */ - spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); - - /* KEYPAD */ - samsung_keypad_set_platdata(&keypad_data); - - platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices)); -} - -MACHINE_START(GONI, "GONI") - /* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */ - .atag_offset = 0x100, - .init_irq = s5pv210_init_irq, - .map_io = goni_map_io, - .init_machine = goni_machine_init, - .init_time = samsung_timer_init, - .reserve = &goni_reserve, - .restart = s5pv210_restart, -MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c deleted file mode 100644 index 448e1d2eeed6..000000000000 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ /dev/null @@ -1,159 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/mach-smdkc110.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/i2c.h> -#include <linux/device.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/setup.h> -#include <asm/mach-types.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/devs.h> -#include <plat/cpu.h> -#include <linux/platform_data/ata-samsung_cf.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/pm.h> -#include <plat/samsung-time.h> -#include <plat/mfc.h> - -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDKC110_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDKC110_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDKC110_UCON_DEFAULT, - .ulcon = SMDKC110_ULCON_DEFAULT, - .ufcon = SMDKC110_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDKC110_UCON_DEFAULT, - .ulcon = SMDKC110_ULCON_DEFAULT, - .ufcon = SMDKC110_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDKC110_UCON_DEFAULT, - .ulcon = SMDKC110_ULCON_DEFAULT, - .ufcon = SMDKC110_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDKC110_UCON_DEFAULT, - .ulcon = SMDKC110_ULCON_DEFAULT, - .ufcon = SMDKC110_UFCON_DEFAULT, - }, -}; - -static struct s3c_ide_platdata smdkc110_ide_pdata __initdata = { - .setup_gpio = s5pv210_ide_setup_gpio, -}; - -static struct platform_device *smdkc110_devices[] __initdata = { - &s5pv210_device_iis0, - &s5pv210_device_ac97, - &s5pv210_device_spdif, - &s3c_device_cfcon, - &s3c_device_i2c0, - &s3c_device_i2c1, - &s3c_device_i2c2, - &s3c_device_rtc, - &s3c_device_wdt, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5p_device_fimc_md, - &s5p_device_mfc, - &s5p_device_mfc_l, - &s5p_device_mfc_r, -}; - -static struct i2c_board_info smdkc110_i2c_devs0[] __initdata = { - { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung S524AD0XD1 */ - { I2C_BOARD_INFO("wm8580", 0x1b), }, -}; - -static struct i2c_board_info smdkc110_i2c_devs1[] __initdata = { - /* To Be Updated */ -}; - -static struct i2c_board_info smdkc110_i2c_devs2[] __initdata = { - /* To Be Updated */ -}; - -static void __init smdkc110_map_io(void) -{ - s5pv210_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); - s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); -} - -static void __init smdkc110_reserve(void) -{ - s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); -} - -static void __init smdkc110_machine_init(void) -{ - s3c_pm_init(); - - s3c_i2c0_set_platdata(NULL); - s3c_i2c1_set_platdata(NULL); - s3c_i2c2_set_platdata(NULL); - i2c_register_board_info(0, smdkc110_i2c_devs0, - ARRAY_SIZE(smdkc110_i2c_devs0)); - i2c_register_board_info(1, smdkc110_i2c_devs1, - ARRAY_SIZE(smdkc110_i2c_devs1)); - i2c_register_board_info(2, smdkc110_i2c_devs2, - ARRAY_SIZE(smdkc110_i2c_devs2)); - - s3c_ide_set_platdata(&smdkc110_ide_pdata); - - platform_add_devices(smdkc110_devices, ARRAY_SIZE(smdkc110_devices)); -} - -MACHINE_START(SMDKC110, "SMDKC110") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .atag_offset = 0x100, - .init_irq = s5pv210_init_irq, - .map_io = smdkc110_map_io, - .init_machine = smdkc110_machine_init, - .init_time = samsung_timer_init, - .restart = s5pv210_restart, - .reserve = &smdkc110_reserve, -MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c deleted file mode 100644 index 6816ccdfd86c..000000000000 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ /dev/null @@ -1,336 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/mach-smdkv210.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/i2c.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/device.h> -#include <linux/dm9000.h> -#include <linux/fb.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/pwm_backlight.h> -#include <linux/platform_data/s3c-hsotg.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/setup.h> -#include <asm/mach-types.h> - -#include <video/platform_lcd.h> -#include <video/samsung_fimd.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/regs-srom.h> -#include <plat/gpio-cfg.h> -#include <plat/devs.h> -#include <plat/cpu.h> -#include <plat/adc.h> -#include <linux/platform_data/touchscreen-s3c2410.h> -#include <linux/platform_data/ata-samsung_cf.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/keypad.h> -#include <plat/pm.h> -#include <plat/fb.h> -#include <plat/samsung-time.h> -#include <plat/backlight.h> -#include <plat/mfc.h> - -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDKV210_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDKV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDKV210_UCON_DEFAULT, - .ulcon = SMDKV210_ULCON_DEFAULT, - .ufcon = SMDKV210_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDKV210_UCON_DEFAULT, - .ulcon = SMDKV210_ULCON_DEFAULT, - .ufcon = SMDKV210_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDKV210_UCON_DEFAULT, - .ulcon = SMDKV210_ULCON_DEFAULT, - .ufcon = SMDKV210_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDKV210_UCON_DEFAULT, - .ulcon = SMDKV210_ULCON_DEFAULT, - .ufcon = SMDKV210_UFCON_DEFAULT, - }, -}; - -static struct s3c_ide_platdata smdkv210_ide_pdata __initdata = { - .setup_gpio = s5pv210_ide_setup_gpio, -}; - -static uint32_t smdkv210_keymap[] __initdata = { - /* KEY(row, col, keycode) */ - KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3), - KEY(0, 6, KEY_4), KEY(0, 7, KEY_5), - KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C), - KEY(1, 6, KEY_D), KEY(1, 7, KEY_E) -}; - -static struct matrix_keymap_data smdkv210_keymap_data __initdata = { - .keymap = smdkv210_keymap, - .keymap_size = ARRAY_SIZE(smdkv210_keymap), -}; - -static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = { - .keymap_data = &smdkv210_keymap_data, - .rows = 8, - .cols = 8, -}; - -static struct resource smdkv210_dm9000_resources[] = { - [0] = DEFINE_RES_MEM(S5PV210_PA_SROM_BANK5, 1), - [1] = DEFINE_RES_MEM(S5PV210_PA_SROM_BANK5 + 2, 1), - [2] = DEFINE_RES_NAMED(IRQ_EINT(9), 1, NULL, IORESOURCE_IRQ \ - | IORESOURCE_IRQ_HIGHLEVEL), -}; - -static struct dm9000_plat_data smdkv210_dm9000_platdata = { - .flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM, - .dev_addr = { 0x00, 0x09, 0xc0, 0xff, 0xec, 0x48 }, -}; - -static struct platform_device smdkv210_dm9000 = { - .name = "dm9000", - .id = -1, - .num_resources = ARRAY_SIZE(smdkv210_dm9000_resources), - .resource = smdkv210_dm9000_resources, - .dev = { - .platform_data = &smdkv210_dm9000_platdata, - }, -}; - -static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) { -#if !defined(CONFIG_BACKLIGHT_PWM) - gpio_request_one(S5PV210_GPD0(3), GPIOF_OUT_INIT_HIGH, "GPD0"); - gpio_free(S5PV210_GPD0(3)); -#endif - - /* fire nRESET on power up */ - gpio_request_one(S5PV210_GPH0(6), GPIOF_OUT_INIT_HIGH, "GPH0"); - - gpio_set_value(S5PV210_GPH0(6), 0); - mdelay(10); - - gpio_set_value(S5PV210_GPH0(6), 1); - mdelay(10); - - gpio_free(S5PV210_GPH0(6)); - } else { -#if !defined(CONFIG_BACKLIGHT_PWM) - gpio_request_one(S5PV210_GPD0(3), GPIOF_OUT_INIT_LOW, "GPD0"); - gpio_free(S5PV210_GPD0(3)); -#endif - } -} - -static struct plat_lcd_data smdkv210_lcd_lte480wv_data = { - .set_power = smdkv210_lte480wv_set_power, -}; - -static struct platform_device smdkv210_lcd_lte480wv = { - .name = "platform-lcd", - .dev.parent = &s3c_device_fb.dev, - .dev.platform_data = &smdkv210_lcd_lte480wv_data, -}; - -static struct s3c_fb_pd_win smdkv210_fb_win0 = { - .max_bpp = 32, - .default_bpp = 24, - .xres = 800, - .yres = 480, -}; - -static struct fb_videomode smdkv210_lcd_timing = { - .left_margin = 13, - .right_margin = 8, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, -}; - -static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = { - .win[0] = &smdkv210_fb_win0, - .vtiming = &smdkv210_lcd_timing, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .setup_gpio = s5pv210_fb_gpio_setup_24bpp, -}; - -/* USB OTG */ -static struct s3c_hsotg_plat smdkv210_hsotg_pdata; - -static struct platform_device *smdkv210_devices[] __initdata = { - &s3c_device_adc, - &s3c_device_cfcon, - &s3c_device_fb, - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - &s3c_device_i2c0, - &s3c_device_i2c1, - &s3c_device_i2c2, - &samsung_device_pwm, - &s3c_device_rtc, - &s3c_device_ts, - &s3c_device_usb_hsotg, - &s3c_device_wdt, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5p_device_fimc_md, - &s5p_device_jpeg, - &s5p_device_mfc, - &s5p_device_mfc_l, - &s5p_device_mfc_r, - &s5pv210_device_ac97, - &s5pv210_device_iis0, - &s5pv210_device_spdif, - &samsung_asoc_idma, - &samsung_device_keypad, - &smdkv210_dm9000, - &smdkv210_lcd_lte480wv, -}; - -static void __init smdkv210_dm9000_init(void) -{ - unsigned int tmp; - - gpio_request(S5PV210_MP01(5), "nCS5"); - s3c_gpio_cfgpin(S5PV210_MP01(5), S3C_GPIO_SFN(2)); - gpio_free(S5PV210_MP01(5)); - - tmp = (5 << S5P_SROM_BCX__TACC__SHIFT); - __raw_writel(tmp, S5P_SROM_BC5); - - tmp = __raw_readl(S5P_SROM_BW); - tmp &= (S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS5__SHIFT); - tmp |= (1 << S5P_SROM_BW__NCS5__SHIFT); - __raw_writel(tmp, S5P_SROM_BW); -} - -static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = { - { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung S524AD0XD1 */ - { I2C_BOARD_INFO("wm8580", 0x1b), }, -}; - -static struct i2c_board_info smdkv210_i2c_devs1[] __initdata = { - /* To Be Updated */ -}; - -static struct i2c_board_info smdkv210_i2c_devs2[] __initdata = { - /* To Be Updated */ -}; - -/* LCD Backlight data */ -static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = { - .no = S5PV210_GPD0(3), - .func = S3C_GPIO_SFN(2), -}; - -static struct platform_pwm_backlight_data smdkv210_bl_data = { - .pwm_id = 3, - .pwm_period_ns = 1000, - .enable_gpio = -1, -}; - -static void __init smdkv210_map_io(void) -{ - s5pv210_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); - s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4); -} - -static void __init smdkv210_reserve(void) -{ - s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); -} - -static void __init smdkv210_machine_init(void) -{ - s3c_pm_init(); - - smdkv210_dm9000_init(); - - samsung_keypad_set_platdata(&smdkv210_keypad_data); - s3c24xx_ts_set_platdata(NULL); - - s3c_i2c0_set_platdata(NULL); - s3c_i2c1_set_platdata(NULL); - s3c_i2c2_set_platdata(NULL); - i2c_register_board_info(0, smdkv210_i2c_devs0, - ARRAY_SIZE(smdkv210_i2c_devs0)); - i2c_register_board_info(1, smdkv210_i2c_devs1, - ARRAY_SIZE(smdkv210_i2c_devs1)); - i2c_register_board_info(2, smdkv210_i2c_devs2, - ARRAY_SIZE(smdkv210_i2c_devs2)); - - s3c_ide_set_platdata(&smdkv210_ide_pdata); - - s3c_fb_set_platdata(&smdkv210_lcd0_pdata); - - s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata); - - platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices)); - - samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data); -} - -MACHINE_START(SMDKV210, "SMDKV210") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .atag_offset = 0x100, - .init_irq = s5pv210_init_irq, - .map_io = smdkv210_map_io, - .init_machine = smdkv210_machine_init, - .init_time = samsung_timer_init, - .restart = s5pv210_restart, - .reserve = &smdkv210_reserve, -MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c deleted file mode 100644 index 157805529f26..000000000000 --- a/arch/arm/mach-s5pv210/mach-torbreck.c +++ /dev/null @@ -1,135 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/mach-torbreck.c - * - * Copyright (c) 2010 aESOP Community - * http://www.aesop.or.kr/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/i2c.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/setup.h> -#include <asm/mach-types.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/devs.h> -#include <plat/cpu.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/samsung-time.h> - -#include "common.h" - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define TORBRECK_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define TORBRECK_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define TORBRECK_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg torbreck_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = TORBRECK_UCON_DEFAULT, - .ulcon = TORBRECK_ULCON_DEFAULT, - .ufcon = TORBRECK_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = TORBRECK_UCON_DEFAULT, - .ulcon = TORBRECK_ULCON_DEFAULT, - .ufcon = TORBRECK_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = TORBRECK_UCON_DEFAULT, - .ulcon = TORBRECK_ULCON_DEFAULT, - .ufcon = TORBRECK_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = TORBRECK_UCON_DEFAULT, - .ulcon = TORBRECK_ULCON_DEFAULT, - .ufcon = TORBRECK_UFCON_DEFAULT, - }, -}; - -static struct platform_device *torbreck_devices[] __initdata = { - &s5pv210_device_iis0, - &s3c_device_cfcon, - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - &s3c_device_i2c0, - &s3c_device_i2c1, - &s3c_device_i2c2, - &s3c_device_rtc, - &s3c_device_wdt, -}; - -static struct i2c_board_info torbreck_i2c_devs0[] __initdata = { - /* To Be Updated */ -}; - -static struct i2c_board_info torbreck_i2c_devs1[] __initdata = { - /* To Be Updated */ -}; - -static struct i2c_board_info torbreck_i2c_devs2[] __initdata = { - /* To Be Updated */ -}; - -static void __init torbreck_map_io(void) -{ - s5pv210_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); - s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); -} - -static void __init torbreck_machine_init(void) -{ - s3c_i2c0_set_platdata(NULL); - s3c_i2c1_set_platdata(NULL); - s3c_i2c2_set_platdata(NULL); - i2c_register_board_info(0, torbreck_i2c_devs0, - ARRAY_SIZE(torbreck_i2c_devs0)); - i2c_register_board_info(1, torbreck_i2c_devs1, - ARRAY_SIZE(torbreck_i2c_devs1)); - i2c_register_board_info(2, torbreck_i2c_devs2, - ARRAY_SIZE(torbreck_i2c_devs2)); - - platform_add_devices(torbreck_devices, ARRAY_SIZE(torbreck_devices)); -} - -MACHINE_START(TORBRECK, "TORBRECK") - /* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */ - .atag_offset = 0x100, - .init_irq = s5pv210_init_irq, - .map_io = torbreck_map_io, - .init_machine = torbreck_machine_init, - .init_time = samsung_timer_init, - .restart = s5pv210_restart, -MACHINE_END diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index dd5bfec16b4f..00d1523284da 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -75,26 +75,6 @@ static void s5pv210_pm_prepare(void) s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); } -static int s5pv210_pm_add(struct device *dev, struct subsys_interface *sif) -{ - pm_cpu_prep = s5pv210_pm_prepare; - pm_cpu_sleep = s5pv210_cpu_suspend; - - return 0; -} - -static struct subsys_interface s5pv210_pm_interface = { - .name = "s5pv210_pm", - .subsys = &s5pv210_subsys, - .add_dev = s5pv210_pm_add, -}; - -static __init int s5pv210_pm_drvinit(void) -{ - return subsys_interface_register(&s5pv210_pm_interface); -} -arch_initcall(s5pv210_pm_drvinit); - static void s5pv210_pm_resume(void) { u32 tmp; @@ -114,6 +94,10 @@ static struct syscore_ops s5pv210_pm_syscore_ops = { static __init int s5pv210_pm_syscore_init(void) { register_syscore_ops(&s5pv210_pm_syscore_ops); + + pm_cpu_prep = s5pv210_pm_prepare; + pm_cpu_sleep = s5pv210_cpu_suspend; + return 0; } arch_initcall(s5pv210_pm_syscore_init); diff --git a/arch/arm/mach-s5pv210/setup-fb-24bpp.c b/arch/arm/mach-s5pv210/setup-fb-24bpp.c deleted file mode 100644 index 55103c8220b3..000000000000 --- a/arch/arm/mach-s5pv210/setup-fb-24bpp.c +++ /dev/null @@ -1,49 +0,0 @@ -/* linux/arch/arm/plat-s5pv210/setup-fb-24bpp.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Base s5pv210 setup information for 24bpp LCD framebuffer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/fb.h> -#include <linux/gpio.h> - -#include <mach/map.h> -#include <plat/fb.h> -#include <mach/regs-clock.h> -#include <plat/gpio-cfg.h> - -static void s5pv210_fb_cfg_gpios(unsigned int base, unsigned int nr) -{ - s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2)); - - for (; nr > 0; nr--, base++) - s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4); -} - - -void s5pv210_fb_gpio_setup_24bpp(void) -{ - s5pv210_fb_cfg_gpios(S5PV210_GPF0(0), 8); - s5pv210_fb_cfg_gpios(S5PV210_GPF1(0), 8); - s5pv210_fb_cfg_gpios(S5PV210_GPF2(0), 8); - s5pv210_fb_cfg_gpios(S5PV210_GPF3(0), 4); - - /* Set DISPLAY_CONTROL register for Display path selection. - * - * ouput | RGB | I80 | ITU - * ----------------------------------- - * 00 | MIE | FIMD | FIMD - * 01 | MDNIE | MDNIE | FIMD - * 10 | FIMD | FIMD | FIMD - * 11 | FIMD | FIMD | FIMD - */ - writel(0x2, S5P_MDNIE_SEL); -} diff --git a/arch/arm/mach-s5pv210/setup-fimc.c b/arch/arm/mach-s5pv210/setup-fimc.c deleted file mode 100644 index 54cc5b11be0b..000000000000 --- a/arch/arm/mach-s5pv210/setup-fimc.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * - * S5PV210 camera interface GPIO configuration. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <plat/gpio-cfg.h> -#include <plat/camport.h> - -int s5pv210_fimc_setup_gpio(enum s5p_camport_id id) -{ - u32 gpio8, gpio5; - int ret; - - switch (id) { - case S5P_CAMPORT_A: - gpio8 = S5PV210_GPE0(0); - gpio5 = S5PV210_GPE1(0); - break; - - case S5P_CAMPORT_B: - gpio8 = S5PV210_GPJ0(0); - gpio5 = S5PV210_GPJ1(0); - break; - - default: - WARN(1, "Wrong camport id: %d\n", id); - return -EINVAL; - } - - ret = s3c_gpio_cfgall_range(gpio8, 8, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_UP); - if (ret) - return ret; - - return s3c_gpio_cfgall_range(gpio5, 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c index 4a15849766c0..3658416134ec 100644 --- a/arch/arm/mach-s5pv210/setup-i2c0.c +++ b/arch/arm/mach-s5pv210/setup-i2c0.c @@ -23,6 +23,8 @@ struct platform_device; /* don't need the contents */ void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgall_range(S5PV210_GPD1(0), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + /* + * FIXME: Used only by legacy code that is not used anymore, + * but still compiled in, until all dependencies are removed. + */ } diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c deleted file mode 100644 index 4777f6b97a92..000000000000 --- a/arch/arm/mach-s5pv210/setup-i2c1.c +++ /dev/null @@ -1,28 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/setup-i2c1.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * I2C1 GPIO configuration. - * - * Based on plat-s3c64xx/setup-i2c1.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/gpio.h> - -struct platform_device; /* don't need the contents */ - -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c1_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5PV210_GPD1(2), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c deleted file mode 100644 index bbce6c74b915..000000000000 --- a/arch/arm/mach-s5pv210/setup-i2c2.c +++ /dev/null @@ -1,28 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/setup-i2c2.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * I2C2 GPIO configuration. - * - * Based on plat-s3c64xx/setup-i2c0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/gpio.h> - -struct platform_device; /* don't need the contents */ - -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/gpio-cfg.h> - -void s3c_i2c2_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5PV210_GPD1(4), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-s5pv210/setup-ide.c b/arch/arm/mach-s5pv210/setup-ide.c deleted file mode 100644 index ea123d546bd2..000000000000 --- a/arch/arm/mach-s5pv210/setup-ide.c +++ /dev/null @@ -1,39 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/setup-ide.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV210 setup information for IDE - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/gpio.h> - -#include <plat/gpio-cfg.h> - -static void s5pv210_ide_cfg_gpios(unsigned int base, unsigned int nr) -{ - s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4)); - - for (; nr > 0; nr--, base++) - s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4); -} - -void s5pv210_ide_setup_gpio(void) -{ - /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */ - s5pv210_ide_cfg_gpios(S5PV210_GPJ0(0), 8); - - /* CF_Data[0 - 7] */ - s5pv210_ide_cfg_gpios(S5PV210_GPJ2(0), 8); - - /* CF_Data[8 - 15] */ - s5pv210_ide_cfg_gpios(S5PV210_GPJ3(0), 8); - - /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */ - s5pv210_ide_cfg_gpios(S5PV210_GPJ4(0), 4); -} diff --git a/arch/arm/mach-s5pv210/setup-keypad.c b/arch/arm/mach-s5pv210/setup-keypad.c deleted file mode 100644 index c56420a52f48..000000000000 --- a/arch/arm/mach-s5pv210/setup-keypad.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * linux/arch/arm/mach-s5pv210/setup-keypad.c - * - * Copyright (C) 2010 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/gpio.h> -#include <plat/gpio-cfg.h> - -void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) -{ - /* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */ - s3c_gpio_cfgrange_nopull(S5PV210_GPH3(0), rows, S3C_GPIO_SFN(3)); - - /* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */ - s3c_gpio_cfgrange_nopull(S5PV210_GPH2(0), cols, S3C_GPIO_SFN(3)); -} diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c deleted file mode 100644 index 0512ada00522..000000000000 --- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c +++ /dev/null @@ -1,103 +0,0 @@ -/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/mmc/host.h> -#include <linux/mmc/card.h> - -#include <plat/gpio-cfg.h> -#include <plat/sdhci.h> - -void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - - /* Set all the necessary GPG0/GPG1 pins to special-function 2 */ - s3c_gpio_cfgrange_nopull(S5PV210_GPG0(0), 2, S3C_GPIO_SFN(2)); - - switch (width) { - case 8: - /* GPG1[3:6] special-function 3 */ - s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(3)); - case 4: - /* GPG0[3:6] special-function 2 */ - s3c_gpio_cfgrange_nopull(S5PV210_GPG0(3), 4, S3C_GPIO_SFN(2)); - default: - break; - } - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2)); - } -} - -void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - - /* Set all the necessary GPG1[0:1] pins to special-function 2 */ - s3c_gpio_cfgrange_nopull(S5PV210_GPG1(0), 2, S3C_GPIO_SFN(2)); - - /* Data pin GPG1[3:6] to special-function 2 */ - s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(2)); - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2)); - } -} - -void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - - /* Set all the necessary GPG2[0:1] pins to special-function 2 */ - s3c_gpio_cfgrange_nopull(S5PV210_GPG2(0), 2, S3C_GPIO_SFN(2)); - - switch (width) { - case 8: - /* Data pin GPG3[3:6] to special-function 3 */ - s3c_gpio_cfgrange_nopull(S5PV210_GPG3(3), 4, S3C_GPIO_SFN(3)); - case 4: - /* Data pin GPG2[3:6] to special-function 2 */ - s3c_gpio_cfgrange_nopull(S5PV210_GPG2(3), 4, S3C_GPIO_SFN(2)); - default: - break; - } - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2)); - } -} - -void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width) -{ - struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - - /* Set all the necessary GPG3[0:1] pins to special-function 2 */ - s3c_gpio_cfgrange_nopull(S5PV210_GPG3(0), 2, S3C_GPIO_SFN(2)); - - /* Data pin GPG3[3:6] to special-function 2 */ - s3c_gpio_cfgrange_nopull(S5PV210_GPG3(3), 4, S3C_GPIO_SFN(2)); - - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_setpull(S5PV210_GPG3(2), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PV210_GPG3(2), S3C_GPIO_SFN(2)); - } -} diff --git a/arch/arm/mach-s5pv210/setup-spi.c b/arch/arm/mach-s5pv210/setup-spi.c deleted file mode 100644 index 81aecc162f82..000000000000 --- a/arch/arm/mach-s5pv210/setup-spi.c +++ /dev/null @@ -1,34 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/setup-spi.c - * - * Copyright (C) 2011 Samsung Electronics Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <plat/gpio-cfg.h> - -#ifdef CONFIG_S3C64XX_DEV_SPI0 -int s3c64xx_spi0_cfg_gpio(void) -{ - s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP); - s3c_gpio_cfgall_range(S5PV210_GPB(2), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - return 0; -} -#endif - -#ifdef CONFIG_S3C64XX_DEV_SPI1 -int s3c64xx_spi1_cfg_gpio(void) -{ - s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP); - s3c_gpio_cfgall_range(S5PV210_GPB(6), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - return 0; -} -#endif diff --git a/arch/arm/mach-s5pv210/setup-usb-phy.c b/arch/arm/mach-s5pv210/setup-usb-phy.c deleted file mode 100644 index b2ee5333f89c..000000000000 --- a/arch/arm/mach-s5pv210/setup-usb-phy.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * Copyright (C) 2012 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundationr - */ - -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/platform_device.h> - -#include <mach/map.h> - -#include <plat/cpu.h> -#include <plat/regs-usb-hsotg-phy.h> -#include <plat/usb-phy.h> - -#define S5PV210_USB_PHY_CON (S3C_VA_SYS + 0xE80C) -#define S5PV210_USB_PHY0_EN (1 << 0) -#define S5PV210_USB_PHY1_EN (1 << 1) - -static int s5pv210_usb_otgphy_init(struct platform_device *pdev) -{ - struct clk *xusbxti; - u32 phyclk; - - writel(readl(S5PV210_USB_PHY_CON) | S5PV210_USB_PHY0_EN, - S5PV210_USB_PHY_CON); - - /* set clock frequency for PLL */ - phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK; - - xusbxti = clk_get(&pdev->dev, "xusbxti"); - if (xusbxti && !IS_ERR(xusbxti)) { - switch (clk_get_rate(xusbxti)) { - case 12 * MHZ: - phyclk |= S3C_PHYCLK_CLKSEL_12M; - break; - case 24 * MHZ: - phyclk |= S3C_PHYCLK_CLKSEL_24M; - break; - default: - case 48 * MHZ: - /* default reference clock */ - break; - } - clk_put(xusbxti); - } - - /* TODO: select external clock/oscillator */ - writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK); - - /* set to normal OTG PHY */ - writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR); - mdelay(1); - - /* reset OTG PHY and Link */ - writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK, - S3C_RSTCON); - udelay(20); /* at-least 10uS */ - writel(0, S3C_RSTCON); - - return 0; -} - -static int s5pv210_usb_otgphy_exit(struct platform_device *pdev) -{ - writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN | - S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR); - - writel(readl(S5PV210_USB_PHY_CON) & ~S5PV210_USB_PHY0_EN, - S5PV210_USB_PHY_CON); - - return 0; -} - -int s5p_usb_phy_init(struct platform_device *pdev, int type) -{ - if (type == USB_PHY_TYPE_DEVICE) - return s5pv210_usb_otgphy_init(pdev); - - return -EINVAL; -} - -int s5p_usb_phy_exit(struct platform_device *pdev, int type) -{ - if (type == USB_PHY_TYPE_DEVICE) - return s5pv210_usb_otgphy_exit(pdev); - - return -EINVAL; -} |