diff options
Diffstat (limited to 'arch/arm/mach-sa1100')
| -rw-r--r-- | arch/arm/mach-sa1100/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/assabet.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/clock.c | 12 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/collie.c | 5 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/generic.c | 6 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/h3100.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/h3600.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/include/mach/irqs.h | 73 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/irq.c | 203 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/neponset.c | 6 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/pci-nanoengine.c | 94 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/pleb.c | 7 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/pm.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/time.c | 139 |
14 files changed, 92 insertions, 462 deletions
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index f1114d11fe13..61ff91e76e0a 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o +obj-y := clock.o generic.o irq.o #nmi-oopser.o # Specific board support obj-$(CONFIG_SA1100_ASSABET) += assabet.o diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 7dd894ece9ae..d28ecb9ef172 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -37,7 +37,7 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <asm/mach/irda.h> +#include <linux/platform_data/irda-sa11x0.h> #include <asm/mach/map.h> #include <mach/assabet.h> #include <linux/platform_data/mfd-mcp-sa11x0.h> diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c index 03c75a811cb0..cbf53bb9c814 100644 --- a/arch/arm/mach-sa1100/clock.c +++ b/arch/arm/mach-sa1100/clock.c @@ -119,6 +119,17 @@ static DEFINE_CLK(gpio27, &clk_gpio27_ops); static DEFINE_CLK(cpu, &clk_cpu_ops); +static unsigned long clk_36864_get_rate(struct clk *clk) +{ + return 3686400; +} + +static struct clkops clk_36864_ops = { + .get_rate = clk_36864_get_rate, +}; + +static DEFINE_CLK(36864, &clk_36864_ops); + static struct clk_lookup sa11xx_clkregs[] = { CLKDEV_INIT("sa1111.0", NULL, &clk_gpio27), CLKDEV_INIT("sa1100-rtc", NULL, NULL), @@ -126,6 +137,7 @@ static struct clk_lookup sa11xx_clkregs[] = { CLKDEV_INIT("sa11x0-pcmcia", NULL, &clk_cpu), /* sa1111 names devices using internal offsets, PCMCIA is at 0x1800 */ CLKDEV_INIT("1800", NULL, &clk_cpu), + CLKDEV_INIT(NULL, "OSTIMER0", &clk_36864), }; static int __init sa11xx_clk_init(void) diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index b90c7d828391..3cc2b71e16f0 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -43,7 +43,7 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/irda.h> +#include <linux/platform_data/irda-sa11x0.h> #include <asm/hardware/scoop.h> #include <asm/mach/sharpsl_param.h> @@ -371,8 +371,7 @@ static void __init collie_init(void) PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PWER = _COLLIE_GPIO_AC_IN | _COLLIE_GPIO_CO | _COLLIE_GPIO_ON_KEY | - _COLLIE_GPIO_WAKEUP | _COLLIE_GPIO_nREMOCON_INT | PWER_RTC; + PWER = 0; PGSR = _COLLIE_GPIO_nREMOCON_ON; diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index d4ea142c4edd..40e0d8619a2d 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -33,6 +33,7 @@ #include <mach/irqs.h> #include "generic.h" +#include <clocksource/pxa.h> unsigned int reset_status; EXPORT_SYMBOL(reset_status); @@ -369,6 +370,11 @@ void __init sa1100_map_io(void) iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); } +void __init sa1100_timer_init(void) +{ + pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x90000000), 3686400); +} + /* * Disable the memory bus request/grant signals on the SA1110 to * ensure that we don't receive spurious memory requests. We set diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c index 3c43219bc881..c6b412054a3c 100644 --- a/arch/arm/mach-sa1100/h3100.c +++ b/arch/arm/mach-sa1100/h3100.c @@ -18,7 +18,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/irda.h> +#include <linux/platform_data/irda-sa11x0.h> #include <mach/h3xxx.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 5be54c214c7c..118338efd790 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -18,7 +18,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/irda.h> +#include <linux/platform_data/irda-sa11x0.h> #include <mach/h3xxx.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h index de0983494c7e..734e30e406a3 100644 --- a/arch/arm/mach-sa1100/include/mach/irqs.h +++ b/arch/arm/mach-sa1100/include/mach/irqs.h @@ -8,17 +8,17 @@ * 2001/11/14 RMK Cleaned up and standardised a lot of the IRQs. */ -#define IRQ_GPIO0 1 -#define IRQ_GPIO1 2 -#define IRQ_GPIO2 3 -#define IRQ_GPIO3 4 -#define IRQ_GPIO4 5 -#define IRQ_GPIO5 6 -#define IRQ_GPIO6 7 -#define IRQ_GPIO7 8 -#define IRQ_GPIO8 9 -#define IRQ_GPIO9 10 -#define IRQ_GPIO10 11 +#define IRQ_GPIO0_SC 1 +#define IRQ_GPIO1_SC 2 +#define IRQ_GPIO2_SC 3 +#define IRQ_GPIO3_SC 4 +#define IRQ_GPIO4_SC 5 +#define IRQ_GPIO5_SC 6 +#define IRQ_GPIO6_SC 7 +#define IRQ_GPIO7_SC 8 +#define IRQ_GPIO8_SC 9 +#define IRQ_GPIO9_SC 10 +#define IRQ_GPIO10_SC 11 #define IRQ_GPIO11_27 12 #define IRQ_LCD 13 /* LCD controller */ #define IRQ_Ser0UDC 14 /* Ser. port 0 UDC */ @@ -41,32 +41,43 @@ #define IRQ_RTC1Hz 31 /* RTC 1 Hz clock */ #define IRQ_RTCAlrm 32 /* RTC Alarm */ -#define IRQ_GPIO11 33 -#define IRQ_GPIO12 34 -#define IRQ_GPIO13 35 -#define IRQ_GPIO14 36 -#define IRQ_GPIO15 37 -#define IRQ_GPIO16 38 -#define IRQ_GPIO17 39 -#define IRQ_GPIO18 40 -#define IRQ_GPIO19 41 -#define IRQ_GPIO20 42 -#define IRQ_GPIO21 43 -#define IRQ_GPIO22 44 -#define IRQ_GPIO23 45 -#define IRQ_GPIO24 46 -#define IRQ_GPIO25 47 -#define IRQ_GPIO26 48 -#define IRQ_GPIO27 49 +#define IRQ_GPIO0 33 +#define IRQ_GPIO1 34 +#define IRQ_GPIO2 35 +#define IRQ_GPIO3 36 +#define IRQ_GPIO4 37 +#define IRQ_GPIO5 38 +#define IRQ_GPIO6 39 +#define IRQ_GPIO7 40 +#define IRQ_GPIO8 41 +#define IRQ_GPIO9 42 +#define IRQ_GPIO10 43 +#define IRQ_GPIO11 44 +#define IRQ_GPIO12 45 +#define IRQ_GPIO13 46 +#define IRQ_GPIO14 47 +#define IRQ_GPIO15 48 +#define IRQ_GPIO16 49 +#define IRQ_GPIO17 50 +#define IRQ_GPIO18 51 +#define IRQ_GPIO19 52 +#define IRQ_GPIO20 53 +#define IRQ_GPIO21 54 +#define IRQ_GPIO22 55 +#define IRQ_GPIO23 56 +#define IRQ_GPIO24 57 +#define IRQ_GPIO25 58 +#define IRQ_GPIO26 59 +#define IRQ_GPIO27 60 /* * The next 16 interrupts are for board specific purposes. Since * the kernel can only run on one machine at a time, we can re-use * these. If you need more, increase IRQ_BOARD_END, but keep it - * within sensible limits. IRQs 49 to 64 are available. + * within sensible limits. IRQs 61 to 76 are available. */ -#define IRQ_BOARD_START 50 -#define IRQ_BOARD_END 66 +#define IRQ_BOARD_START 61 +#define IRQ_BOARD_END 77 /* * Figure out the MAX IRQ number. diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index 63e2901db416..65aebfa66fe5 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -80,170 +80,6 @@ static struct irq_domain_ops sa1100_normal_irqdomain_ops = { static struct irq_domain *sa1100_normal_irqdomain; -/* - * SA1100 GPIO edge detection for IRQs: - * IRQs are generated on Falling-Edge, Rising-Edge, or both. - * Use this instead of directly setting GRER/GFER. - */ -static int GPIO_IRQ_rising_edge; -static int GPIO_IRQ_falling_edge; -static int GPIO_IRQ_mask = (1 << 11) - 1; - -static int sa1100_gpio_type(struct irq_data *d, unsigned int type) -{ - unsigned int mask; - - mask = BIT(d->hwirq); - - if (type == IRQ_TYPE_PROBE) { - if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask) - return 0; - type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; - } - - if (type & IRQ_TYPE_EDGE_RISING) { - GPIO_IRQ_rising_edge |= mask; - } else - GPIO_IRQ_rising_edge &= ~mask; - if (type & IRQ_TYPE_EDGE_FALLING) { - GPIO_IRQ_falling_edge |= mask; - } else - GPIO_IRQ_falling_edge &= ~mask; - - GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask; - GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask; - - return 0; -} - -/* - * GPIO IRQs must be acknowledged. - */ -static void sa1100_gpio_ack(struct irq_data *d) -{ - GEDR = BIT(d->hwirq); -} - -static int sa1100_gpio_wake(struct irq_data *d, unsigned int on) -{ - if (on) - PWER |= BIT(d->hwirq); - else - PWER &= ~BIT(d->hwirq); - return 0; -} - -/* - * This is for IRQs from 0 to 10. - */ -static struct irq_chip sa1100_low_gpio_chip = { - .name = "GPIO-l", - .irq_ack = sa1100_gpio_ack, - .irq_mask = sa1100_mask_irq, - .irq_unmask = sa1100_unmask_irq, - .irq_set_type = sa1100_gpio_type, - .irq_set_wake = sa1100_gpio_wake, -}; - -static int sa1100_low_gpio_irqdomain_map(struct irq_domain *d, - unsigned int irq, irq_hw_number_t hwirq) -{ - irq_set_chip_and_handler(irq, &sa1100_low_gpio_chip, - handle_edge_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - - return 0; -} - -static struct irq_domain_ops sa1100_low_gpio_irqdomain_ops = { - .map = sa1100_low_gpio_irqdomain_map, - .xlate = irq_domain_xlate_onetwocell, -}; - -static struct irq_domain *sa1100_low_gpio_irqdomain; - -/* - * IRQ11 (GPIO11 through 27) handler. We enter here with the - * irq_controller_lock held, and IRQs disabled. Decode the IRQ - * and call the handler. - */ -static void -sa1100_high_gpio_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned int mask; - - mask = GEDR & 0xfffff800; - do { - /* - * clear down all currently active IRQ sources. - * We will be processing them all. - */ - GEDR = mask; - - irq = IRQ_GPIO11; - mask >>= 11; - do { - if (mask & 1) - generic_handle_irq(irq); - mask >>= 1; - irq++; - } while (mask); - - mask = GEDR & 0xfffff800; - } while (mask); -} - -/* - * Like GPIO0 to 10, GPIO11-27 IRQs need to be handled specially. - * In addition, the IRQs are all collected up into one bit in the - * interrupt controller registers. - */ -static void sa1100_high_gpio_mask(struct irq_data *d) -{ - unsigned int mask = BIT(d->hwirq); - - GPIO_IRQ_mask &= ~mask; - - GRER &= ~mask; - GFER &= ~mask; -} - -static void sa1100_high_gpio_unmask(struct irq_data *d) -{ - unsigned int mask = BIT(d->hwirq); - - GPIO_IRQ_mask |= mask; - - GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask; - GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask; -} - -static struct irq_chip sa1100_high_gpio_chip = { - .name = "GPIO-h", - .irq_ack = sa1100_gpio_ack, - .irq_mask = sa1100_high_gpio_mask, - .irq_unmask = sa1100_high_gpio_unmask, - .irq_set_type = sa1100_gpio_type, - .irq_set_wake = sa1100_gpio_wake, -}; - -static int sa1100_high_gpio_irqdomain_map(struct irq_domain *d, - unsigned int irq, irq_hw_number_t hwirq) -{ - irq_set_chip_and_handler(irq, &sa1100_high_gpio_chip, - handle_edge_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - - return 0; -} - -static struct irq_domain_ops sa1100_high_gpio_irqdomain_ops = { - .map = sa1100_high_gpio_irqdomain_map, - .xlate = irq_domain_xlate_onetwocell, -}; - -static struct irq_domain *sa1100_high_gpio_irqdomain; - static struct resource irq_resource = DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs"); @@ -270,17 +106,6 @@ static int sa1100irq_suspend(void) IC_GPIO6|IC_GPIO5|IC_GPIO4|IC_GPIO3|IC_GPIO2| IC_GPIO1|IC_GPIO0); - /* - * Set the appropriate edges for wakeup. - */ - GRER = PWER & GPIO_IRQ_rising_edge; - GFER = PWER & GPIO_IRQ_falling_edge; - - /* - * Clear any pending GPIO interrupts. - */ - GEDR = GEDR; - return 0; } @@ -292,9 +117,6 @@ static void sa1100irq_resume(void) ICCR = st->iccr; ICLR = st->iclr; - GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask; - GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask; - ICMR = st->icmr; } } @@ -325,7 +147,8 @@ sa1100_handle_irq(struct pt_regs *regs) if (mask == 0) break; - handle_IRQ(ffs(mask) - 1 + IRQ_GPIO0, regs); + handle_domain_irq(sa1100_normal_irqdomain, + ffs(mask) - 1, regs); } while (1); } @@ -339,34 +162,16 @@ void __init sa1100_init_irq(void) /* all IRQs are IRQ, not FIQ */ ICLR = 0; - /* clear all GPIO edge detects */ - GFER = 0; - GRER = 0; - GEDR = -1; - /* * Whatever the doc says, this has to be set for the wait-on-irq * instruction to work... on a SA1100 rev 9 at least. */ ICCR = 1; - sa1100_low_gpio_irqdomain = irq_domain_add_legacy(NULL, - 11, IRQ_GPIO0, 0, - &sa1100_low_gpio_irqdomain_ops, NULL); - - sa1100_normal_irqdomain = irq_domain_add_legacy(NULL, - 21, IRQ_GPIO11_27, 11, + sa1100_normal_irqdomain = irq_domain_add_simple(NULL, + 32, IRQ_GPIO0_SC, &sa1100_normal_irqdomain_ops, NULL); - sa1100_high_gpio_irqdomain = irq_domain_add_legacy(NULL, - 17, IRQ_GPIO11, 11, - &sa1100_high_gpio_irqdomain_ops, NULL); - - /* - * Install handler for GPIO 11-27 edge detect interrupts - */ - irq_set_chained_handler(IRQ_GPIO11_27, sa1100_high_gpio_handler); - set_handle_irq(sa1100_handle_irq); sa1100_init_gpio(); diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 169262e3040d..af868d258e66 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -12,6 +12,7 @@ #include <linux/pm.h> #include <linux/serial_core.h> #include <linux/slab.h> +#include <linux/smc91x.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -258,12 +259,17 @@ static int neponset_probe(struct platform_device *dev) 0x02000000, "smc91x-attrib"), { .flags = IORESOURCE_IRQ }, }; + struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_8BIT | SMC91X_IO_SHIFT_2 | SMC91X_NOWAIT, + }; struct platform_device_info smc91x_devinfo = { .parent = &dev->dev, .name = "smc91x", .id = 0, .res = smc91x_resources, .num_res = ARRAY_SIZE(smc91x_resources), + .data = &smc91x_platdata, + .size_data = sizeof(smc91x_platdata), }; int ret, irq; diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c index b704433c529c..d7ae8d50f6d8 100644 --- a/arch/arm/mach-sa1100/pci-nanoengine.c +++ b/arch/arm/mach-sa1100/pci-nanoengine.c @@ -22,7 +22,6 @@ #include <linux/kernel.h> #include <linux/irq.h> #include <linux/pci.h> -#include <linux/spinlock.h> #include <asm/mach/pci.h> #include <asm/mach-types.h> @@ -30,97 +29,20 @@ #include <mach/nanoengine.h> #include <mach/hardware.h> -static DEFINE_SPINLOCK(nano_lock); - -static int nanoengine_get_pci_address(struct pci_bus *bus, - unsigned int devfn, int where, void __iomem **address) +static void __iomem *nanoengine_pci_map_bus(struct pci_bus *bus, + unsigned int devfn, int where) { - int ret = PCIBIOS_DEVICE_NOT_FOUND; - unsigned int busnr = bus->number; + if (bus->number != 0 || (devfn >> 3) != 0) + return NULL; - *address = (void __iomem *)NANO_PCI_CONFIG_SPACE_VIRT + + return (void __iomem *)NANO_PCI_CONFIG_SPACE_VIRT + ((bus->number << 16) | (devfn << 8) | (where & ~3)); - - ret = (busnr > 255 || devfn > 255 || where > 255) ? - PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; - - return ret; -} - -static int nanoengine_read_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *val) -{ - int ret; - void __iomem *address; - unsigned long flags; - u32 v; - - /* nanoEngine PCI bridge does not return -1 for a non-existing - * device. We must fake the answer. We know that the only valid - * device is device zero at bus 0, which is the network chip. */ - if (bus->number != 0 || (devfn >> 3) != 0) { - v = -1; - nanoengine_get_pci_address(bus, devfn, where, &address); - goto exit_function; - } - - spin_lock_irqsave(&nano_lock, flags); - - ret = nanoengine_get_pci_address(bus, devfn, where, &address); - if (ret != PCIBIOS_SUCCESSFUL) - return ret; - v = __raw_readl(address); - - spin_unlock_irqrestore(&nano_lock, flags); - - v >>= ((where & 3) * 8); - v &= (unsigned long)(-1) >> ((4 - size) * 8); - -exit_function: - *val = v; - return PCIBIOS_SUCCESSFUL; -} - -static int nanoengine_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 val) -{ - int ret; - void __iomem *address; - unsigned long flags; - unsigned shift; - u32 v; - - shift = (where & 3) * 8; - - spin_lock_irqsave(&nano_lock, flags); - - ret = nanoengine_get_pci_address(bus, devfn, where, &address); - if (ret != PCIBIOS_SUCCESSFUL) - return ret; - v = __raw_readl(address); - switch (size) { - case 1: - v &= ~(0xFF << shift); - v |= val << shift; - break; - case 2: - v &= ~(0xFFFF << shift); - v |= val << shift; - break; - case 4: - v = val; - break; - } - __raw_writel(v, address); - - spin_unlock_irqrestore(&nano_lock, flags); - - return PCIBIOS_SUCCESSFUL; } static struct pci_ops pci_nano_ops = { - .read = nanoengine_read_config, - .write = nanoengine_write_config, + .map_bus = nanoengine_pci_map_bus, + .read = pci_generic_config_read32, + .write = pci_generic_config_write32, }; static int __init pci_nanoengine_map_irq(const struct pci_dev *dev, u8 slot, diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index 091261878eff..1525d7b5f1b7 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -11,6 +11,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/mtd/partitions.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/setup.h> @@ -43,12 +44,18 @@ static struct resource smc91x_resources[] = { #endif }; +static struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, +}; static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, + .dev = { + .platform_data = &smc91x_platdata, + }, }; static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index 6645d1e31f14..34853d5dfda2 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -81,6 +81,7 @@ static int sa11x0_pm_enter(suspend_state_t state) /* * Ensure not to come back here if it wasn't intended */ + RCSR = RCSR_SMR; PSPR = 0; /* diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c deleted file mode 100644 index 1dea6cfafb31..000000000000 --- a/arch/arm/mach-sa1100/time.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * linux/arch/arm/mach-sa1100/time.c - * - * Copyright (C) 1998 Deborah Wallach. - * Twiddles (C) 1999 Hugo Fiennes <hugo@empeg.com> - * - * 2000/03/29 (C) Nicolas Pitre <nico@fluxnic.net> - * Rewritten: big cleanup, much simpler, better HZ accuracy. - * - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/timex.h> -#include <linux/clockchips.h> -#include <linux/sched_clock.h> - -#include <asm/mach/time.h> -#include <mach/hardware.h> -#include <mach/irqs.h> - -#define SA1100_CLOCK_FREQ 3686400 -#define SA1100_LATCH DIV_ROUND_CLOSEST(SA1100_CLOCK_FREQ, HZ) - -static u64 notrace sa1100_read_sched_clock(void) -{ - return readl_relaxed(OSCR); -} - -#define MIN_OSCR_DELTA 2 - -static irqreturn_t sa1100_ost0_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *c = dev_id; - - /* Disarm the compare/match, signal the event. */ - writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER); - writel_relaxed(OSSR_M0, OSSR); - c->event_handler(c); - - return IRQ_HANDLED; -} - -static int -sa1100_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c) -{ - unsigned long next, oscr; - - writel_relaxed(readl_relaxed(OIER) | OIER_E0, OIER); - next = readl_relaxed(OSCR) + delta; - writel_relaxed(next, OSMR0); - oscr = readl_relaxed(OSCR); - - return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0; -} - -static void -sa1100_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c) -{ - switch (mode) { - case CLOCK_EVT_MODE_ONESHOT: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER); - writel_relaxed(OSSR_M0, OSSR); - break; - - case CLOCK_EVT_MODE_RESUME: - case CLOCK_EVT_MODE_PERIODIC: - break; - } -} - -#ifdef CONFIG_PM -unsigned long osmr[4], oier; - -static void sa1100_timer_suspend(struct clock_event_device *cedev) -{ - osmr[0] = readl_relaxed(OSMR0); - osmr[1] = readl_relaxed(OSMR1); - osmr[2] = readl_relaxed(OSMR2); - osmr[3] = readl_relaxed(OSMR3); - oier = readl_relaxed(OIER); -} - -static void sa1100_timer_resume(struct clock_event_device *cedev) -{ - writel_relaxed(0x0f, OSSR); - writel_relaxed(osmr[0], OSMR0); - writel_relaxed(osmr[1], OSMR1); - writel_relaxed(osmr[2], OSMR2); - writel_relaxed(osmr[3], OSMR3); - writel_relaxed(oier, OIER); - - /* - * OSMR0 is the system timer: make sure OSCR is sufficiently behind - */ - writel_relaxed(OSMR0 - SA1100_LATCH, OSCR); -} -#else -#define sa1100_timer_suspend NULL -#define sa1100_timer_resume NULL -#endif - -static struct clock_event_device ckevt_sa1100_osmr0 = { - .name = "osmr0", - .features = CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .set_next_event = sa1100_osmr0_set_next_event, - .set_mode = sa1100_osmr0_set_mode, - .suspend = sa1100_timer_suspend, - .resume = sa1100_timer_resume, -}; - -static struct irqaction sa1100_timer_irq = { - .name = "ost0", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = sa1100_ost0_interrupt, - .dev_id = &ckevt_sa1100_osmr0, -}; - -void __init sa1100_timer_init(void) -{ - writel_relaxed(0, OIER); - writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR); - - sched_clock_register(sa1100_read_sched_clock, 32, 3686400); - - ckevt_sa1100_osmr0.cpumask = cpumask_of(0); - - setup_irq(IRQ_OST0, &sa1100_timer_irq); - - clocksource_mmio_init(OSCR, "oscr", SA1100_CLOCK_FREQ, 200, 32, - clocksource_mmio_readl_up); - clockevents_config_and_register(&ckevt_sa1100_osmr0, 3686400, - MIN_OSCR_DELTA * 2, 0x7fffffff); -} |