diff options
Diffstat (limited to 'arch/arm/mach-tegra/headsmp.S')
| -rw-r--r-- | arch/arm/mach-tegra/headsmp.S | 264 |
1 files changed, 0 insertions, 264 deletions
diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S index 4a317fae6860..fd473f2b4c3d 100644 --- a/arch/arm/mach-tegra/headsmp.S +++ b/arch/arm/mach-tegra/headsmp.S @@ -1,66 +1,9 @@ #include <linux/linkage.h> #include <linux/init.h> -#include <asm/cache.h> -#include <asm/asm-offsets.h> -#include <asm/hardware/cache-l2x0.h> - -#include "flowctrl.h" -#include "iomap.h" -#include "reset.h" #include "sleep.h" -#define APB_MISC_GP_HIDREV 0x804 -#define PMC_SCRATCH41 0x140 - -#define RESET_DATA(x) ((TEGRA_RESET_##x)*4) - .section ".text.head", "ax" - __CPUINIT - -/* - * Tegra specific entry point for secondary CPUs. - * The secondary kernel init calls v7_flush_dcache_all before it enables - * the L1; however, the L1 comes out of reset in an undefined state, so - * the clean + invalidate performed by v7_flush_dcache_all causes a bunch - * of cache lines with uninitialized data and uninitialized tags to get - * written out to memory, which does really unpleasant things to the main - * processor. We fix this by performing an invalidate, rather than a - * clean + invalidate, before jumping into the kernel. - */ -ENTRY(v7_invalidate_l1) - mov r0, #0 - mcr p15, 2, r0, c0, c0, 0 - mrc p15, 1, r0, c0, c0, 0 - - ldr r1, =0x7fff - and r2, r1, r0, lsr #13 - - ldr r1, =0x3ff - - and r3, r1, r0, lsr #3 @ NumWays - 1 - add r2, r2, #1 @ NumSets - - and r0, r0, #0x7 - add r0, r0, #4 @ SetShift - - clz r1, r3 @ WayShift - add r4, r3, #1 @ NumWays -1: sub r2, r2, #1 @ NumSets-- - mov r3, r4 @ Temp = NumWays -2: subs r3, r3, #1 @ Temp-- - mov r5, r3, lsl r1 - mov r6, r2, lsl r0 - orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift) - mcr p15, 0, r5, c7, c6, 2 - bgt 2b - cmp r2, #0 - bgt 1b - dsb - isb - mov pc, lr -ENDPROC(v7_invalidate_l1) - ENTRY(tegra_secondary_startup) bl v7_invalidate_l1 @@ -69,210 +12,3 @@ ENTRY(tegra_secondary_startup) mcr p14, 0, r0, c7, c12, 6 b secondary_startup ENDPROC(tegra_secondary_startup) - -#ifdef CONFIG_PM_SLEEP -/* - * tegra_resume - * - * CPU boot vector when restarting the a CPU following - * an LP2 transition. Also branched to by LP0 and LP1 resume after - * re-enabling sdram. - */ -ENTRY(tegra_resume) - bl v7_invalidate_l1 - /* Enable coresight */ - mov32 r0, 0xC5ACCE55 - mcr p14, 0, r0, c7, c12, 6 - - cpu_id r0 - cmp r0, #0 @ CPU0? - bne cpu_resume @ no - -#ifdef CONFIG_ARCH_TEGRA_3x_SOC - /* Are we on Tegra20? */ - mov32 r6, TEGRA_APB_MISC_BASE - ldr r0, [r6, #APB_MISC_GP_HIDREV] - and r0, r0, #0xff00 - cmp r0, #(0x20 << 8) - beq 1f @ Yes - /* Clear the flow controller flags for this CPU. */ - mov32 r2, TEGRA_FLOW_CTRL_BASE + FLOW_CTRL_CPU0_CSR @ CPU0 CSR - ldr r1, [r2] - /* Clear event & intr flag */ - orr r1, r1, \ - #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG - movw r0, #0x0FFD @ enable, cluster_switch, immed, & bitmaps - bic r1, r1, r0 - str r1, [r2] -1: -#endif - -#ifdef CONFIG_HAVE_ARM_SCU - /* enable SCU */ - mov32 r0, TEGRA_ARM_PERIF_BASE - ldr r1, [r0] - orr r1, r1, #1 - str r1, [r0] -#endif - - /* L2 cache resume & re-enable */ - l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr - - b cpu_resume -ENDPROC(tegra_resume) -#endif - -#ifdef CONFIG_CACHE_L2X0 - .globl l2x0_saved_regs_addr -l2x0_saved_regs_addr: - .long 0 -#endif - - .align L1_CACHE_SHIFT -ENTRY(__tegra_cpu_reset_handler_start) - -/* - * __tegra_cpu_reset_handler: - * - * Common handler for all CPU reset events. - * - * Register usage within the reset handler: - * - * R7 = CPU present (to the OS) mask - * R8 = CPU in LP1 state mask - * R9 = CPU in LP2 state mask - * R10 = CPU number - * R11 = CPU mask - * R12 = pointer to reset handler data - * - * NOTE: This code is copied to IRAM. All code and data accesses - * must be position-independent. - */ - - .align L1_CACHE_SHIFT -ENTRY(__tegra_cpu_reset_handler) - - cpsid aif, 0x13 @ SVC mode, interrupts disabled - mrc p15, 0, r10, c0, c0, 5 @ MPIDR - and r10, r10, #0x3 @ R10 = CPU number - mov r11, #1 - mov r11, r11, lsl r10 @ R11 = CPU mask - adr r12, __tegra_cpu_reset_handler_data - -#ifdef CONFIG_SMP - /* Does the OS know about this CPU? */ - ldr r7, [r12, #RESET_DATA(MASK_PRESENT)] - tst r7, r11 @ if !present - bleq __die @ CPU not present (to OS) -#endif - -#ifdef CONFIG_ARCH_TEGRA_2x_SOC - /* Are we on Tegra20? */ - mov32 r6, TEGRA_APB_MISC_BASE - ldr r0, [r6, #APB_MISC_GP_HIDREV] - and r0, r0, #0xff00 - cmp r0, #(0x20 << 8) - bne 1f - /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */ - mov32 r6, TEGRA_PMC_BASE - mov r0, #0 - cmp r10, #0 - strne r0, [r6, #PMC_SCRATCH41] -1: -#endif - - /* Waking up from LP2? */ - ldr r9, [r12, #RESET_DATA(MASK_LP2)] - tst r9, r11 @ if in_lp2 - beq __is_not_lp2 - ldr lr, [r12, #RESET_DATA(STARTUP_LP2)] - cmp lr, #0 - bleq __die @ no LP2 startup handler - bx lr - -__is_not_lp2: - -#ifdef CONFIG_SMP - /* - * Can only be secondary boot (initial or hotplug) but CPU 0 - * cannot be here. - */ - cmp r10, #0 - bleq __die @ CPU0 cannot be here - ldr lr, [r12, #RESET_DATA(STARTUP_SECONDARY)] - cmp lr, #0 - bleq __die @ no secondary startup handler - bx lr -#endif - -/* - * We don't know why the CPU reset. Just kill it. - * The LR register will contain the address we died at + 4. - */ - -__die: - sub lr, lr, #4 - mov32 r7, TEGRA_PMC_BASE - str lr, [r7, #PMC_SCRATCH41] - - mov32 r7, TEGRA_CLK_RESET_BASE - - /* Are we on Tegra20? */ - mov32 r6, TEGRA_APB_MISC_BASE - ldr r0, [r6, #APB_MISC_GP_HIDREV] - and r0, r0, #0xff00 - cmp r0, #(0x20 << 8) - bne 1f - -#ifdef CONFIG_ARCH_TEGRA_2x_SOC - mov32 r0, 0x1111 - mov r1, r0, lsl r10 - str r1, [r7, #0x340] @ CLK_RST_CPU_CMPLX_SET -#endif -1: -#ifdef CONFIG_ARCH_TEGRA_3x_SOC - mov32 r6, TEGRA_FLOW_CTRL_BASE - - cmp r10, #0 - moveq r1, #FLOW_CTRL_HALT_CPU0_EVENTS - moveq r2, #FLOW_CTRL_CPU0_CSR - movne r1, r10, lsl #3 - addne r2, r1, #(FLOW_CTRL_CPU1_CSR-8) - addne r1, r1, #(FLOW_CTRL_HALT_CPU1_EVENTS-8) - - /* Clear CPU "event" and "interrupt" flags and power gate - it when halting but not before it is in the "WFI" state. */ - ldr r0, [r6, +r2] - orr r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG - orr r0, r0, #FLOW_CTRL_CSR_ENABLE - str r0, [r6, +r2] - - /* Unconditionally halt this CPU */ - mov r0, #FLOW_CTRL_WAITEVENT - str r0, [r6, +r1] - ldr r0, [r6, +r1] @ memory barrier - - dsb - isb - wfi @ CPU should be power gated here - - /* If the CPU didn't power gate above just kill it's clock. */ - - mov r0, r11, lsl #8 - str r0, [r7, #348] @ CLK_CPU_CMPLX_SET -#endif - - /* If the CPU still isn't dead, just spin here. */ - b . -ENDPROC(__tegra_cpu_reset_handler) - - .align L1_CACHE_SHIFT - .type __tegra_cpu_reset_handler_data, %object - .globl __tegra_cpu_reset_handler_data -__tegra_cpu_reset_handler_data: - .rept TEGRA_RESET_DATA_SIZE - .long 0 - .endr - .align L1_CACHE_SHIFT - -ENTRY(__tegra_cpu_reset_handler_end) |