diff options
Diffstat (limited to 'arch/arm/plat-omap/include/plat/mux.h')
-rw-r--r-- | arch/arm/plat-omap/include/plat/mux.h | 232 |
1 files changed, 8 insertions, 224 deletions
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index ba77de601501..8f069cc80350 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -130,58 +130,11 @@ #define OMAP2_PULL_UP (1 << 4) #define OMAP2_ALTELECTRICALSEL (1 << 5) -/* 34xx specific mux bit defines */ -#define OMAP3_INPUT_EN (1 << 8) -#define OMAP3_OFF_EN (1 << 9) -#define OMAP3_OFFOUT_EN (1 << 10) -#define OMAP3_OFFOUT_VAL (1 << 11) -#define OMAP3_OFF_PULL_EN (1 << 12) -#define OMAP3_OFF_PULL_UP (1 << 13) -#define OMAP3_WAKEUP_EN (1 << 14) - -/* 34xx mux mode options for each pin. See TRM for options */ -#define OMAP34XX_MUX_MODE0 0 -#define OMAP34XX_MUX_MODE1 1 -#define OMAP34XX_MUX_MODE2 2 -#define OMAP34XX_MUX_MODE3 3 -#define OMAP34XX_MUX_MODE4 4 -#define OMAP34XX_MUX_MODE5 5 -#define OMAP34XX_MUX_MODE6 6 -#define OMAP34XX_MUX_MODE7 7 - -/* 34xx active pin states */ -#define OMAP34XX_PIN_OUTPUT 0 -#define OMAP34XX_PIN_INPUT OMAP3_INPUT_EN -#define OMAP34XX_PIN_INPUT_PULLUP (OMAP2_PULL_ENA | OMAP3_INPUT_EN \ - | OMAP2_PULL_UP) -#define OMAP34XX_PIN_INPUT_PULLDOWN (OMAP2_PULL_ENA | OMAP3_INPUT_EN) - -/* 34xx off mode states */ -#define OMAP34XX_PIN_OFF_NONE 0 -#define OMAP34XX_PIN_OFF_OUTPUT_HIGH (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \ - | OMAP3_OFFOUT_VAL) -#define OMAP34XX_PIN_OFF_OUTPUT_LOW (OMAP3_OFF_EN | OMAP3_OFFOUT_EN) -#define OMAP34XX_PIN_OFF_INPUT_PULLUP (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \ - | OMAP3_OFF_PULL_UP) -#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN) -#define OMAP34XX_PIN_OFF_WAKEUPENABLE OMAP3_WAKEUP_EN - -#define MUX_CFG_34XX(desc, reg_offset, mux_value) { \ - .name = desc, \ - .debug = 0, \ - .mux_reg = reg_offset, \ - .mux_val = mux_value \ -}, - struct pin_config { char *name; const unsigned int mux_reg; unsigned char debug; -#if defined(CONFIG_ARCH_OMAP34XX) - u16 mux_val; /* Wake-up, off mode, pull, mux mode */ -#endif - #if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX) const unsigned char mask_offset; const unsigned char mask; @@ -219,11 +172,17 @@ enum omap7xx_index { AA17_7XX_USB_DM, W16_7XX_USB_PU_EN, W17_7XX_USB_VBUSI, + W18_7XX_USB_DMCK_OUT, + W19_7XX_USB_DCRST, /* MMC */ MMC_7XX_CMD, MMC_7XX_CLK, MMC_7XX_DAT0, + + /* I2C */ + I2C_7XX_SCL, + I2C_7XX_SDA, }; enum omap1xxx_index { @@ -681,181 +640,6 @@ enum omap24xx_index { }; -enum omap34xx_index { - /* 34xx I2C */ - K21_34XX_I2C1_SCL, - J21_34XX_I2C1_SDA, - AF15_34XX_I2C2_SCL, - AE15_34XX_I2C2_SDA, - AF14_34XX_I2C3_SCL, - AG14_34XX_I2C3_SDA, - AD26_34XX_I2C4_SCL, - AE26_34XX_I2C4_SDA, - - /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ - Y8_3430_USB1HS_PHY_CLK, - Y9_3430_USB1HS_PHY_STP, - AA14_3430_USB1HS_PHY_DIR, - AA11_3430_USB1HS_PHY_NXT, - W13_3430_USB1HS_PHY_DATA0, - W12_3430_USB1HS_PHY_DATA1, - W11_3430_USB1HS_PHY_DATA2, - Y11_3430_USB1HS_PHY_DATA3, - W9_3430_USB1HS_PHY_DATA4, - Y12_3430_USB1HS_PHY_DATA5, - W8_3430_USB1HS_PHY_DATA6, - Y13_3430_USB1HS_PHY_DATA7, - - /* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/ - AA8_3430_USB2HS_PHY_CLK, - AA10_3430_USB2HS_PHY_STP, - AA9_3430_USB2HS_PHY_DIR, - AB11_3430_USB2HS_PHY_NXT, - AB10_3430_USB2HS_PHY_DATA0, - AB9_3430_USB2HS_PHY_DATA1, - W3_3430_USB2HS_PHY_DATA2, - T4_3430_USB2HS_PHY_DATA3, - T3_3430_USB2HS_PHY_DATA4, - R3_3430_USB2HS_PHY_DATA5, - R4_3430_USB2HS_PHY_DATA6, - T2_3430_USB2HS_PHY_DATA7, - - - /* TLL - HSUSB: 12-pin TLL Port 1*/ - Y8_3430_USB1HS_TLL_CLK, - Y9_3430_USB1HS_TLL_STP, - AA14_3430_USB1HS_TLL_DIR, - AA11_3430_USB1HS_TLL_NXT, - W13_3430_USB1HS_TLL_DATA0, - W12_3430_USB1HS_TLL_DATA1, - W11_3430_USB1HS_TLL_DATA2, - Y11_3430_USB1HS_TLL_DATA3, - W9_3430_USB1HS_TLL_DATA4, - Y12_3430_USB1HS_TLL_DATA5, - W8_3430_USB1HS_TLL_DATA6, - Y13_3430_USB1HS_TLL_DATA7, - - /* TLL - HSUSB: 12-pin TLL Port 2*/ - AA8_3430_USB2HS_TLL_CLK, - AA10_3430_USB2HS_TLL_STP, - AA9_3430_USB2HS_TLL_DIR, - AB11_3430_USB2HS_TLL_NXT, - AB10_3430_USB2HS_TLL_DATA0, - AB9_3430_USB2HS_TLL_DATA1, - W3_3430_USB2HS_TLL_DATA2, - T4_3430_USB2HS_TLL_DATA3, - T3_3430_USB2HS_TLL_DATA4, - R3_3430_USB2HS_TLL_DATA5, - R4_3430_USB2HS_TLL_DATA6, - T2_3430_USB2HS_TLL_DATA7, - - /* TLL - HSUSB: 12-pin TLL Port 3*/ - AA6_3430_USB3HS_TLL_CLK, - AB3_3430_USB3HS_TLL_STP, - AA3_3430_USB3HS_TLL_DIR, - Y3_3430_USB3HS_TLL_NXT, - AA5_3430_USB3HS_TLL_DATA0, - Y4_3430_USB3HS_TLL_DATA1, - Y5_3430_USB3HS_TLL_DATA2, - W5_3430_USB3HS_TLL_DATA3, - AB12_3430_USB3HS_TLL_DATA4, - AB13_3430_USB3HS_TLL_DATA5, - AA13_3430_USB3HS_TLL_DATA6, - AA12_3430_USB3HS_TLL_DATA7, - - /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ - AF10_3430_USB1FS_PHY_MM1_RXDP, - AG9_3430_USB1FS_PHY_MM1_RXDM, - W13_3430_USB1FS_PHY_MM1_RXRCV, - W12_3430_USB1FS_PHY_MM1_TXSE0, - W11_3430_USB1FS_PHY_MM1_TXDAT, - Y11_3430_USB1FS_PHY_MM1_TXEN_N, - - /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ - AF7_3430_USB2FS_PHY_MM2_RXDP, - AH7_3430_USB2FS_PHY_MM2_RXDM, - AB10_3430_USB2FS_PHY_MM2_RXRCV, - AB9_3430_USB2FS_PHY_MM2_TXSE0, - W3_3430_USB2FS_PHY_MM2_TXDAT, - T4_3430_USB2FS_PHY_MM2_TXEN_N, - - /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ - AH3_3430_USB3FS_PHY_MM3_RXDP, - AE3_3430_USB3FS_PHY_MM3_RXDM, - AD1_3430_USB3FS_PHY_MM3_RXRCV, - AE1_3430_USB3FS_PHY_MM3_TXSE0, - AD2_3430_USB3FS_PHY_MM3_TXDAT, - AC1_3430_USB3FS_PHY_MM3_TXEN_N, - - /* 34xx GPIO - * - normally these are bidirectional, no internal pullup/pulldown - * - "_UP" suffix (GPIO3_UP) if internal pullup is configured - * - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown - * - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx) - */ - AF26_34XX_GPIO0, - AF22_34XX_GPIO9, - AG9_34XX_GPIO23, - AH8_34XX_GPIO29, - U8_34XX_GPIO54_OUT, - U8_34XX_GPIO54_DOWN, - L8_34XX_GPIO63, - G25_34XX_GPIO86_OUT, - AG4_34XX_GPIO134_OUT, - AF4_34XX_GPIO135_OUT, - AE4_34XX_GPIO136_OUT, - AF6_34XX_GPIO140_UP, - AE6_34XX_GPIO141, - AF5_34XX_GPIO142, - AE5_34XX_GPIO143, - H19_34XX_GPIO164_OUT, - J25_34XX_GPIO170, - - /* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ - H16_34XX_SDRC_CKE0, - H17_34XX_SDRC_CKE1, - - /* MMC1 */ - N28_3430_MMC1_CLK, - M27_3430_MMC1_CMD, - N27_3430_MMC1_DAT0, - N26_3430_MMC1_DAT1, - N25_3430_MMC1_DAT2, - P28_3430_MMC1_DAT3, - P27_3430_MMC1_DAT4, - P26_3430_MMC1_DAT5, - R27_3430_MMC1_DAT6, - R25_3430_MMC1_DAT7, - - /* MMC2 */ - AE2_3430_MMC2_CLK, - AG5_3430_MMC2_CMD, - AH5_3430_MMC2_DAT0, - AH4_3430_MMC2_DAT1, - AG4_3430_MMC2_DAT2, - AF4_3430_MMC2_DAT3, - AE4_3430_MMC2_DAT4, - AH3_3430_MMC2_DAT5, - AF3_3430_MMC2_DAT6, - AE3_3430_MMC2_DAT7, - - /* MMC3 */ - AF10_3430_MMC3_CLK, - AC3_3430_MMC3_CMD, - AE11_3430_MMC3_DAT0, - AH9_3430_MMC3_DAT1, - AF13_3430_MMC3_DAT2, - AF13_3430_MMC3_DAT3, - - /* SYS_NIRQ T2 INT1 */ - AF26_34XX_SYS_NIRQ, - - /* EHCI GPIO's for OMAP3EVM (Rev >= E) */ - AH14_34XX_GPIO21, - AF9_34XX_GPIO22, - U3_34XX_GPIO61, -}; - struct omap_mux_cfg { struct pin_config *pins; unsigned long size; @@ -865,14 +649,14 @@ struct omap_mux_cfg { #ifdef CONFIG_OMAP_MUX /* setup pin muxing in Linux */ extern int omap1_mux_init(void); -extern int omap2_mux_init(void); extern int omap_mux_register(struct omap_mux_cfg *); extern int omap_cfg_reg(unsigned long reg_cfg); #else /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ static inline int omap1_mux_init(void) { return 0; } -static inline int omap2_mux_init(void) { return 0; } static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; } #endif +extern int omap2_mux_init(void); + #endif |