diff options
Diffstat (limited to 'arch/arm/plat-omap')
88 files changed, 7776 insertions, 51 deletions
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index c2e741de0203..197974defbe4 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -10,7 +10,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <linux/version.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> @@ -26,7 +25,7 @@ #include <asm/io.h> -#include <asm/arch/clock.h> +#include <mach/clock.h> static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 8d04929a3c75..f4dff423ae7c 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -19,20 +19,20 @@ #include <linux/serial_reg.h> #include <linux/clk.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/system.h> #include <asm/pgtable.h> #include <asm/mach/map.h> #include <asm/io.h> #include <asm/setup.h> -#include <asm/arch/common.h> -#include <asm/arch/board.h> -#include <asm/arch/control.h> -#include <asm/arch/mux.h> -#include <asm/arch/fpga.h> +#include <mach/common.h> +#include <mach/board.h> +#include <mach/control.h> +#include <mach/mux.h> +#include <mach/fpga.h> -#include <asm/arch/clock.h> +#include <mach/clock.h> #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) # include "../mach-omap2/sdrc.h" diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index d719c15daa55..ae1de308aaad 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -21,7 +21,7 @@ #include <linux/err.h> #include <linux/clk.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/io.h> #include <asm/system.h> diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index f455233af082..5b73bb274452 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -13,11 +13,11 @@ #include <linux/init.h> #include <linux/platform_device.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/io.h> -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> +#include <mach/board.h> +#include <mach/gpio.h> /* Many OMAP development platforms reuse the same "debug board"; these diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index 9128a80d228f..9422dee7de84 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -13,13 +13,13 @@ #include <linux/leds.h> #include <asm/io.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/leds.h> #include <asm/system.h> #include <asm/mach-types.h> -#include <asm/arch/fpga.h> -#include <asm/arch/gpio.h> +#include <mach/fpga.h> +#include <mach/gpio.h> /* Many OMAP development platforms reuse the same "debug board"; these diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 81002b722da1..187e3d8bfdfe 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -14,17 +14,17 @@ #include <linux/init.h> #include <linux/platform_device.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/io.h> #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <asm/arch/tc.h> -#include <asm/arch/board.h> -#include <asm/arch/mux.h> -#include <asm/arch/gpio.h> -#include <asm/arch/menelaus.h> -#include <asm/arch/mcbsp.h> +#include <mach/tc.h> +#include <mach/board.h> +#include <mach/mux.h> +#include <mach/gpio.h> +#include <mach/menelaus.h> +#include <mach/mcbsp.h> #if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index fac8e994f588..a63b644ad305 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -28,10 +28,10 @@ #include <linux/io.h> #include <asm/system.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/dma.h> -#include <asm/arch/tc.h> +#include <mach/tc.h> #undef DEBUG diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index f22506af0e67..743a4abcd85d 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -32,10 +32,10 @@ #include <linux/list.h> #include <linux/clk.h> #include <linux/delay.h> -#include <asm/hardware.h> -#include <asm/arch/dmtimer.h> +#include <mach/hardware.h> +#include <mach/dmtimer.h> #include <asm/io.h> -#include <asm/arch/irqs.h> +#include <mach/irqs.h> /* register offsets */ #define _OMAP_TIMER_ID_OFFSET 0x00 diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index 5d107520e6b9..17a92a31e746 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -28,14 +28,13 @@ #include <linux/platform_device.h> #include <linux/bootmem.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/io.h> -#include <asm/mach-types.h> #include <asm/mach/map.h> -#include <asm/arch/board.h> -#include <asm/arch/sram.h> -#include <asm/arch/omapfb.h> +#include <mach/board.h> +#include <mach/sram.h> +#include <mach/omapfb.h> #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 63e094342ef6..3e76ee2bc731 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -18,10 +18,10 @@ #include <linux/err.h> #include <linux/clk.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> -#include <asm/arch/irqs.h> -#include <asm/arch/gpio.h> +#include <mach/irqs.h> +#include <mach/gpio.h> #include <asm/mach/irq.h> #include <asm/io.h> diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index 7990ab185bb1..0e6d147ab6f8 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -26,8 +26,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/i2c.h> -#include <asm/mach-types.h> -#include <asm/arch/mux.h> +#include <mach/mux.h> #define OMAP_I2C_SIZE 0x3f #define OMAP1_I2C_BASE 0xfffb3800 diff --git a/arch/arm/plat-omap/include/mach/aic23.h b/arch/arm/plat-omap/include/mach/aic23.h new file mode 100644 index 000000000000..5ccedac77526 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/aic23.h @@ -0,0 +1,116 @@ +/* + * arch/arm/plat-omap/include/mach/aic23.h + * + * Hardware definitions for TI TLV320AIC23 audio codec + * + * Copyright (C) 2002 RidgeRun, Inc. + * Author: Steve Johnson + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_AIC23_H +#define __ASM_ARCH_AIC23_H + +// Codec TLV320AIC23 +#define LEFT_LINE_VOLUME_ADDR 0x00 +#define RIGHT_LINE_VOLUME_ADDR 0x01 +#define LEFT_CHANNEL_VOLUME_ADDR 0x02 +#define RIGHT_CHANNEL_VOLUME_ADDR 0x03 +#define ANALOG_AUDIO_CONTROL_ADDR 0x04 +#define DIGITAL_AUDIO_CONTROL_ADDR 0x05 +#define POWER_DOWN_CONTROL_ADDR 0x06 +#define DIGITAL_AUDIO_FORMAT_ADDR 0x07 +#define SAMPLE_RATE_CONTROL_ADDR 0x08 +#define DIGITAL_INTERFACE_ACT_ADDR 0x09 +#define RESET_CONTROL_ADDR 0x0F + +// Left (right) line input volume control register +#define LRS_ENABLED 0x0100 +#define LIM_MUTED 0x0080 +#define LIV_DEFAULT 0x0017 +#define LIV_MAX 0x001f +#define LIV_MIN 0x0000 + +// Left (right) channel headphone volume control register +#define LZC_ON 0x0080 +#define LHV_DEFAULT 0x0079 +#define LHV_MAX 0x007f +#define LHV_MIN 0x0000 + +// Analog audio path control register +#define STA_REG(x) ((x)<<6) +#define STE_ENABLED 0x0020 +#define DAC_SELECTED 0x0010 +#define BYPASS_ON 0x0008 +#define INSEL_MIC 0x0004 +#define MICM_MUTED 0x0002 +#define MICB_20DB 0x0001 + +// Digital audio path control register +#define DACM_MUTE 0x0008 +#define DEEMP_32K 0x0002 +#define DEEMP_44K 0x0004 +#define DEEMP_48K 0x0006 +#define ADCHP_ON 0x0001 + +// Power control down register +#define DEVICE_POWER_OFF 0x0080 +#define CLK_OFF 0x0040 +#define OSC_OFF 0x0020 +#define OUT_OFF 0x0010 +#define DAC_OFF 0x0008 +#define ADC_OFF 0x0004 +#define MIC_OFF 0x0002 +#define LINE_OFF 0x0001 + +// Digital audio interface register +#define MS_MASTER 0x0040 +#define LRSWAP_ON 0x0020 +#define LRP_ON 0x0010 +#define IWL_16 0x0000 +#define IWL_20 0x0004 +#define IWL_24 0x0008 +#define IWL_32 0x000C +#define FOR_I2S 0x0002 +#define FOR_DSP 0x0003 + +// Sample rate control register +#define CLKOUT_HALF 0x0080 +#define CLKIN_HALF 0x0040 +#define BOSR_384fs 0x0002 // BOSR_272fs when in USB mode +#define USB_CLK_ON 0x0001 +#define SR_MASK 0xf +#define CLKOUT_SHIFT 7 +#define CLKIN_SHIFT 6 +#define SR_SHIFT 2 +#define BOSR_SHIFT 1 + +// Digital interface register +#define ACT_ON 0x0001 + +#define TLV320AIC23ID1 (0x1a) // cs low +#define TLV320AIC23ID2 (0x1b) // cs high + +void aic23_power_up(void); +void aic23_power_down(void); + +#endif /* __ASM_ARCH_AIC23_H */ diff --git a/arch/arm/plat-omap/include/mach/blizzard.h b/arch/arm/plat-omap/include/mach/blizzard.h new file mode 100644 index 000000000000..8d160f171372 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/blizzard.h @@ -0,0 +1,12 @@ +#ifndef _BLIZZARD_H +#define _BLIZZARD_H + +struct blizzard_platform_data { + void (*power_up)(struct device *dev); + void (*power_down)(struct device *dev); + unsigned long (*get_clock_rate)(struct device *dev); + + unsigned te_connected : 1; +}; + +#endif diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h new file mode 100644 index 000000000000..cf1dc0223949 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-2430sdp.h @@ -0,0 +1,39 @@ +/* + * arch/arm/plat-omap/include/mach/board-2430sdp.h + * + * Hardware definitions for TI OMAP2430 SDP board. + * + * Based on board-h4.h by Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP_2430SDP_H +#define __ASM_ARCH_OMAP_2430SDP_H + +/* Placeholder for 2430SDP specific defines */ +#define OMAP24XX_ETHR_START 0x08000300 +#define OMAP24XX_ETHR_GPIO_IRQ 149 +#define SDP2430_CS0_BASE 0x04000000 + +#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ + +#endif /* __ASM_ARCH_OMAP_2430SDP_H */ diff --git a/arch/arm/plat-omap/include/mach/board-ams-delta.h b/arch/arm/plat-omap/include/mach/board-ams-delta.h new file mode 100644 index 000000000000..51b102dc906b --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-ams-delta.h @@ -0,0 +1,76 @@ +/* + * arch/arm/plat-omap/include/mach/board-ams-delta.h + * + * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H +#define __ASM_ARCH_OMAP_AMS_DELTA_H + +#if defined (CONFIG_MACH_AMS_DELTA) + +#define AMS_DELTA_LATCH1_PHYS 0x01000000 +#define AMS_DELTA_LATCH1_VIRT 0xEA000000 +#define AMS_DELTA_MODEM_PHYS 0x04000000 +#define AMS_DELTA_MODEM_VIRT 0xEB000000 +#define AMS_DELTA_LATCH2_PHYS 0x08000000 +#define AMS_DELTA_LATCH2_VIRT 0xEC000000 + +#define AMS_DELTA_LATCH1_LED_CAMERA 0x01 +#define AMS_DELTA_LATCH1_LED_ADVERT 0x02 +#define AMS_DELTA_LATCH1_LED_EMAIL 0x04 +#define AMS_DELTA_LATCH1_LED_HANDSFREE 0x08 +#define AMS_DELTA_LATCH1_LED_VOICEMAIL 0x10 +#define AMS_DELTA_LATCH1_LED_VOICE 0x20 + +#define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001 +#define AMS_DELTA_LATCH2_LCD_NDISP 0x0002 +#define AMS_DELTA_LATCH2_NAND_NCE 0x0004 +#define AMS_DELTA_LATCH2_NAND_NRE 0x0008 +#define AMS_DELTA_LATCH2_NAND_NWP 0x0010 +#define AMS_DELTA_LATCH2_NAND_NWE 0x0020 +#define AMS_DELTA_LATCH2_NAND_ALE 0x0040 +#define AMS_DELTA_LATCH2_NAND_CLE 0x0080 +#define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100 +#define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200 +#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 +#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800 +#define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000 +#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000 + +#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0 +#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK 1 +#define AMS_DELTA_GPIO_PIN_MODEM_IRQ 2 +#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH 4 +#define AMS_DELTA_GPIO_PIN_SCARD_NOFF 6 +#define AMS_DELTA_GPIO_PIN_SCARD_IO 7 +#define AMS_DELTA_GPIO_PIN_CONFIG 11 +#define AMS_DELTA_GPIO_PIN_NAND_RB 12 + +#ifndef __ASSEMBLY__ +void ams_delta_latch1_write(u8 mask, u8 value); +void ams_delta_latch2_write(u16 mask, u16 value); +#endif + +#endif /* CONFIG_MACH_AMS_DELTA */ + +#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */ diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h new file mode 100644 index 000000000000..d6f2a8e963d5 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-apollon.h @@ -0,0 +1,38 @@ +/* + * arch/arm/plat-omap/include/mach/board-apollon.h + * + * Hardware definitions for Samsung OMAP24XX Apollon board. + * + * Initial creation by Kyungmin Park <kyungmin.park@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP_APOLLON_H +#define __ASM_ARCH_OMAP_APOLLON_H + +extern void apollon_mmc_init(void); + +/* Placeholder for APOLLON specific defines */ +#define APOLLON_ETHR_GPIO_IRQ 74 + +#endif /* __ASM_ARCH_OMAP_APOLLON_H */ + diff --git a/arch/arm/plat-omap/include/mach/board-fsample.h b/arch/arm/plat-omap/include/mach/board-fsample.h new file mode 100644 index 000000000000..cb3c5ae12776 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-fsample.h @@ -0,0 +1,51 @@ +/* + * arch/arm/plat-omap/include/mach/board-fsample.h + * + * Board-specific goodies for TI F-Sample. + * + * Copyright (C) 2006 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_OMAP_FSAMPLE_H +#define __ASM_ARCH_OMAP_FSAMPLE_H + +/* fsample is pretty close to p2-sample */ +#include <mach/board-perseus2.h> + +#define fsample_cpld_read(reg) __raw_readb(reg) +#define fsample_cpld_write(val, reg) __raw_writeb(val, reg) + +#define FSAMPLE_CPLD_BASE 0xE8100000 +#define FSAMPLE_CPLD_SIZE SZ_4K +#define FSAMPLE_CPLD_START 0x05080000 + +#define FSAMPLE_CPLD_REG_A (FSAMPLE_CPLD_BASE + 0x00) +#define FSAMPLE_CPLD_SWITCH (FSAMPLE_CPLD_BASE + 0x02) +#define FSAMPLE_CPLD_UART (FSAMPLE_CPLD_BASE + 0x02) +#define FSAMPLE_CPLD_REG_B (FSAMPLE_CPLD_BASE + 0x04) +#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06) +#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06) + +#define FSAMPLE_CPLD_BIT_BT_RESET 0 +#define FSAMPLE_CPLD_BIT_LCD_RESET 1 +#define FSAMPLE_CPLD_BIT_CAM_PWDN 2 +#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE 3 +#define FSAMPLE_CPLD_BIT_SD_MMC_EN 4 +#define FSAMPLE_CPLD_BIT_aGPS_PWREN 5 +#define FSAMPLE_CPLD_BIT_BACKLIGHT 6 +#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET 7 +#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N 8 +#define FSAMPLE_CPLD_BIT_OTG_RESET 9 + +#define fsample_cpld_set(bit) \ + fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR) + +#define fsample_cpld_clear(bit) \ + fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR) + +#endif diff --git a/arch/arm/plat-omap/include/mach/board-h2.h b/arch/arm/plat-omap/include/mach/board-h2.h new file mode 100644 index 000000000000..2a050e9be65f --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-h2.h @@ -0,0 +1,41 @@ +/* + * arch/arm/plat-omap/include/mach/board-h2.h + * + * Hardware definitions for TI OMAP1610 H2 board. + * + * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP_H2_H +#define __ASM_ARCH_OMAP_H2_H + +/* Placeholder for H2 specific defines */ + +/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ +#define OMAP1610_ETHR_START 0x04000300 + +extern void h2_mmc_init(void); +extern void h2_mmc_slot_cover_handler(void *arg, int state); + +#endif /* __ASM_ARCH_OMAP_H2_H */ + diff --git a/arch/arm/plat-omap/include/mach/board-h3.h b/arch/arm/plat-omap/include/mach/board-h3.h new file mode 100644 index 000000000000..14909dc7858a --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-h3.h @@ -0,0 +1,36 @@ +/* + * arch/arm/plat-omap/include/mach/board-h3.h + * + * Copyright (C) 2001 RidgeRun, Inc. + * Copyright (C) 2004 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_ARCH_OMAP_H3_H +#define __ASM_ARCH_OMAP_H3_H + +/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */ +#define OMAP1710_ETHR_START 0x04000300 + +extern void h3_mmc_init(void); +extern void h3_mmc_slot_cover_handler(void *arg, int state); + +#endif /* __ASM_ARCH_OMAP_H3_H */ diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h new file mode 100644 index 000000000000..1470cd3e519b --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-h4.h @@ -0,0 +1,35 @@ +/* + * arch/arm/plat-omap/include/mach/board-h4.h + * + * Hardware definitions for TI OMAP1610 H4 board. + * + * Initial creation by Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP_H4_H +#define __ASM_ARCH_OMAP_H4_H + +/* Placeholder for H4 specific defines */ +#define OMAP24XX_ETHR_GPIO_IRQ 92 +#endif /* __ASM_ARCH_OMAP_H4_H */ + diff --git a/arch/arm/plat-omap/include/mach/board-innovator.h b/arch/arm/plat-omap/include/mach/board-innovator.h new file mode 100644 index 000000000000..5ae3e79b9f9c --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-innovator.h @@ -0,0 +1,52 @@ +/* + * arch/arm/plat-omap/include/mach/board-innovator.h + * + * Copyright (C) 2001 RidgeRun, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_ARCH_OMAP_INNOVATOR_H +#define __ASM_ARCH_OMAP_INNOVATOR_H + +#if defined (CONFIG_ARCH_OMAP15XX) + +#ifndef OMAP_SDRAM_DEVICE +#define OMAP_SDRAM_DEVICE D256M_1X16_4B +#endif + +#define OMAP1510P1_IMIF_PRI_VALUE 0x00 +#define OMAP1510P1_EMIFS_PRI_VALUE 0x00 +#define OMAP1510P1_EMIFF_PRI_VALUE 0x00 + +#ifndef __ASSEMBLY__ +void fpga_write(unsigned char val, int reg); +unsigned char fpga_read(int reg); +#endif + +#endif /* CONFIG_ARCH_OMAP15XX */ + +#if defined (CONFIG_ARCH_OMAP16XX) + +/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ +#define INNOVATOR1610_ETHR_START 0x04000300 + +#endif /* CONFIG_ARCH_OMAP1610 */ +#endif /* __ASM_ARCH_OMAP_INNOVATOR_H */ diff --git a/arch/arm/plat-omap/include/mach/board-nokia.h b/arch/arm/plat-omap/include/mach/board-nokia.h new file mode 100644 index 000000000000..2abbe001af8c --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-nokia.h @@ -0,0 +1,54 @@ +/* + * arch/arm/plat-omap/include/mach/board-nokia.h + * + * Information structures for Nokia-specific board config data + * + * Copyright (C) 2005 Nokia Corporation + */ + +#ifndef _OMAP_BOARD_NOKIA_H +#define _OMAP_BOARD_NOKIA_H + +#include <linux/types.h> + +#define OMAP_TAG_NOKIA_BT 0x4e01 +#define OMAP_TAG_WLAN_CX3110X 0x4e02 +#define OMAP_TAG_CBUS 0x4e03 +#define OMAP_TAG_EM_ASIC_BB5 0x4e04 + + +#define BT_CHIP_CSR 1 +#define BT_CHIP_TI 2 + +#define BT_SYSCLK_12 1 +#define BT_SYSCLK_38_4 2 + +struct omap_bluetooth_config { + u8 chip_type; + u8 bt_wakeup_gpio; + u8 host_wakeup_gpio; + u8 reset_gpio; + u8 bt_uart; + u8 bd_addr[6]; + u8 bt_sysclk; +}; + +struct omap_wlan_cx3110x_config { + u8 chip_type; + s16 power_gpio; + s16 irq_gpio; + s16 spi_cs_gpio; +}; + +struct omap_cbus_config { + s16 clk_gpio; + s16 dat_gpio; + s16 sel_gpio; +}; + +struct omap_em_asic_bb5_config { + s16 retu_irq_gpio; + s16 tahvo_irq_gpio; +}; + +#endif diff --git a/arch/arm/plat-omap/include/mach/board-osk.h b/arch/arm/plat-omap/include/mach/board-osk.h new file mode 100644 index 000000000000..3850cb1f220a --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-osk.h @@ -0,0 +1,47 @@ +/* + * arch/arm/plat-omap/include/mach/board-osk.h + * + * Hardware definitions for TI OMAP5912 OSK board. + * + * Written by Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP_OSK_H +#define __ASM_ARCH_OMAP_OSK_H + +/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */ +#define OMAP_OSK_ETHR_START 0x04800300 + +/* TPS65010 has four GPIOs. nPG and LED2 can be treated like GPIOs with + * alternate pin configurations for hardware-controlled blinking. + */ +#define OSK_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */) +# define OSK_TPS_GPIO_USB_PWR_EN (OSK_TPS_GPIO_BASE + 0) +# define OSK_TPS_GPIO_LED_D3 (OSK_TPS_GPIO_BASE + 1) +# define OSK_TPS_GPIO_LAN_RESET (OSK_TPS_GPIO_BASE + 2) +# define OSK_TPS_GPIO_DSP_PWR_EN (OSK_TPS_GPIO_BASE + 3) +# define OSK_TPS_GPIO_LED_D9 (OSK_TPS_GPIO_BASE + 4) +# define OSK_TPS_GPIO_LED_D2 (OSK_TPS_GPIO_BASE + 5) + +#endif /* __ASM_ARCH_OMAP_OSK_H */ + diff --git a/arch/arm/plat-omap/include/mach/board-palmte.h b/arch/arm/plat-omap/include/mach/board-palmte.h new file mode 100644 index 000000000000..6906cdebbcfb --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-palmte.h @@ -0,0 +1,32 @@ +/* + * arch/arm/plat-omap/include/mach/board-palmte.h + * + * Hardware definitions for the Palm Tungsten E device. + * + * Maintainters : http://palmtelinux.sf.net + * palmtelinux-developpers@lists.sf.net + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __OMAP_BOARD_PALMTE_H +#define __OMAP_BOARD_PALMTE_H + +#define PALMTE_USBDETECT_GPIO 0 +#define PALMTE_USB_OR_DC_GPIO 1 +#define PALMTE_TSC_GPIO 4 +#define PALMTE_PINTDAV_GPIO 6 +#define PALMTE_MMC_WP_GPIO 8 +#define PALMTE_MMC_POWER_GPIO 9 +#define PALMTE_HDQ_GPIO 11 +#define PALMTE_HEADPHONES_GPIO 14 +#define PALMTE_SPEAKER_GPIO 15 +#define PALMTE_DC_GPIO OMAP_MPUIO(2) +#define PALMTE_MMC_SWITCH_GPIO OMAP_MPUIO(4) +#define PALMTE_MMC1_GPIO OMAP_MPUIO(6) +#define PALMTE_MMC2_GPIO OMAP_MPUIO(7) +#define PALMTE_MMC3_GPIO OMAP_MPUIO(11) + +#endif /* __OMAP_BOARD_PALMTE_H */ diff --git a/arch/arm/plat-omap/include/mach/board-palmtt.h b/arch/arm/plat-omap/include/mach/board-palmtt.h new file mode 100644 index 000000000000..e79f382b5931 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-palmtt.h @@ -0,0 +1,23 @@ +/* + * arch/arm/plat-omap/include/mach/board-palmte.h + * + * Hardware definitions for the Palm Tungsten|T device. + * + * Maintainters : Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __OMAP_BOARD_PALMTT_H +#define __OMAP_BOARD_PALMTT_H + +#define PALMTT_USBDETECT_GPIO 0 +#define PALMTT_CABLE_GPIO 1 +#define PALMTT_LED_GPIO 3 +#define PALMTT_PENIRQ_GPIO 6 +#define PALMTT_MMC_WP_GPIO 8 +#define PALMTT_HDQ_GPIO 11 + +#endif /* __OMAP_BOARD_PALMTT_H */ diff --git a/arch/arm/plat-omap/include/mach/board-palmz71.h b/arch/arm/plat-omap/include/mach/board-palmz71.h new file mode 100644 index 000000000000..b1d7d579b313 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-palmz71.h @@ -0,0 +1,26 @@ +/* + * arch/arm/plat-omap/include/mach/board-palmz71.h + * + * Hardware definitions for the Palm Zire71 device. + * + * Maintainters : Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __OMAP_BOARD_PALMZ71_H +#define __OMAP_BOARD_PALMZ71_H + +#define PALMZ71_USBDETECT_GPIO 0 +#define PALMZ71_PENIRQ_GPIO 6 +#define PALMZ71_MMC_WP_GPIO 8 +#define PALMZ71_HDQ_GPIO 11 + +#define PALMZ71_HOTSYNC_GPIO OMAP_MPUIO(1) +#define PALMZ71_CABLE_GPIO OMAP_MPUIO(2) +#define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3) +#define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4) + +#endif /* __OMAP_BOARD_PALMZ71_H */ diff --git a/arch/arm/plat-omap/include/mach/board-perseus2.h b/arch/arm/plat-omap/include/mach/board-perseus2.h new file mode 100644 index 000000000000..c06c3d717d57 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-perseus2.h @@ -0,0 +1,39 @@ +/* + * arch/arm/plat-omap/include/mach/board-perseus2.h + * + * Copyright 2003 by Texas Instruments Incorporated + * OMAP730 / Perseus2 support by Jean Pihet + * + * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com) + * Author: RidgeRun, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_ARCH_OMAP_PERSEUS2_H +#define __ASM_ARCH_OMAP_PERSEUS2_H + +#include <mach/fpga.h> + +#ifndef OMAP_SDRAM_DEVICE +#define OMAP_SDRAM_DEVICE D256M_1X16_4B +#endif + +#endif diff --git a/arch/arm/plat-omap/include/mach/board-sx1.h b/arch/arm/plat-omap/include/mach/board-sx1.h new file mode 100644 index 000000000000..355adbdaae33 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-sx1.h @@ -0,0 +1,52 @@ +/* + * Siemens SX1 board definitions + * + * Copyright: Vovan888 at gmail com + * + * This package is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. + */ + +#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H +#define __ASM_ARCH_SX1_I2C_CHIPS_H + +#define SOFIA_MAX_LIGHT_VAL 0x2B + +#define SOFIA_I2C_ADDR 0x32 +/* Sofia reg 3 bits masks */ +#define SOFIA_POWER1_REG 0x03 + +#define SOFIA_USB_POWER 0x01 +#define SOFIA_MMC_POWER 0x04 +#define SOFIA_BLUETOOTH_POWER 0x08 +#define SOFIA_MMILIGHT_POWER 0x20 + +#define SOFIA_POWER2_REG 0x04 +#define SOFIA_BACKLIGHT_REG 0x06 +#define SOFIA_KEYLIGHT_REG 0x07 +#define SOFIA_DIMMING_REG 0x09 + + +/* Function Prototypes for SX1 devices control on I2C bus */ + +int sx1_setbacklight(u8 backlight); +int sx1_getbacklight(u8 *backlight); +int sx1_setkeylight(u8 keylight); +int sx1_getkeylight(u8 *keylight); + +int sx1_setmmipower(u8 onoff); +int sx1_setusbpower(u8 onoff); +int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value); +int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value); + +/* MMC prototypes */ + +extern void sx1_mmc_init(void); +extern void sx1_mmc_slot_cover_handler(void *arg, int state); + +#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */ diff --git a/arch/arm/plat-omap/include/mach/board-voiceblue.h b/arch/arm/plat-omap/include/mach/board-voiceblue.h new file mode 100644 index 000000000000..ed6d346ee123 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board-voiceblue.h @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz> + * + * Hardware definitions for OMAP5910 based VoiceBlue board. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_VOICEBLUE_H +#define __ASM_ARCH_VOICEBLUE_H + +extern void voiceblue_wdt_enable(void); +extern void voiceblue_wdt_disable(void); +extern void voiceblue_wdt_ping(void); +extern void voiceblue_reset(void); + +#endif /* __ASM_ARCH_VOICEBLUE_H */ + diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h new file mode 100644 index 000000000000..54445642f35d --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board.h @@ -0,0 +1,186 @@ +/* + * arch/arm/plat-omap/include/mach/board.h + * + * Information structures for board-specific data + * + * Copyright (C) 2004 Nokia Corporation + * Written by Juha Yrjölä <juha.yrjola@nokia.com> + */ + +#ifndef _OMAP_BOARD_H +#define _OMAP_BOARD_H + +#include <linux/types.h> + +#include <mach/gpio-switch.h> + +/* Different peripheral ids */ +#define OMAP_TAG_CLOCK 0x4f01 +#define OMAP_TAG_MMC 0x4f02 +#define OMAP_TAG_SERIAL_CONSOLE 0x4f03 +#define OMAP_TAG_USB 0x4f04 +#define OMAP_TAG_LCD 0x4f05 +#define OMAP_TAG_GPIO_SWITCH 0x4f06 +#define OMAP_TAG_UART 0x4f07 +#define OMAP_TAG_FBMEM 0x4f08 +#define OMAP_TAG_STI_CONSOLE 0x4f09 +#define OMAP_TAG_CAMERA_SENSOR 0x4f0a + +#define OMAP_TAG_BOOT_REASON 0x4f80 +#define OMAP_TAG_FLASH_PART 0x4f81 +#define OMAP_TAG_VERSION_STR 0x4f82 + +struct omap_clock_config { + /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */ + u8 system_clock_type; +}; + +struct omap_mmc_conf { + unsigned enabled:1; + /* nomux means "standard" muxing is wrong on this board, and that + * board-specific code handled it before common init logic. + */ + unsigned nomux:1; + /* switch pin can be for card detect (default) or card cover */ + unsigned cover:1; + /* 4 wire signaling is optional, and is only used for SD/SDIO */ + unsigned wire4:1; + s16 power_pin; + s16 switch_pin; + s16 wp_pin; +}; + +struct omap_mmc_config { + struct omap_mmc_conf mmc[2]; +}; + +struct omap_serial_console_config { + u8 console_uart; + u32 console_speed; +}; + +struct omap_sti_console_config { + unsigned enable:1; + u8 channel; +}; + +struct omap_camera_sensor_config { + u16 reset_gpio; + int (*power_on)(void * data); + int (*power_off)(void * data); +}; + +struct omap_usb_config { + /* Configure drivers according to the connectors on your board: + * - "A" connector (rectagular) + * ... for host/OHCI use, set "register_host". + * - "B" connector (squarish) or "Mini-B" + * ... for device/gadget use, set "register_dev". + * - "Mini-AB" connector (very similar to Mini-B) + * ... for OTG use as device OR host, initialize "otg" + */ + unsigned register_host:1; + unsigned register_dev:1; + u8 otg; /* port number, 1-based: usb1 == 2 */ + + u8 hmc_mode; + + /* implicitly true if otg: host supports remote wakeup? */ + u8 rwc; + + /* signaling pins used to talk to transceiver on usbN: + * 0 == usbN unused + * 2 == usb0-only, using internal transceiver + * 3 == 3 wire bidirectional + * 4 == 4 wire bidirectional + * 6 == 6 wire unidirectional (or TLL) + */ + u8 pins[3]; +}; + +struct omap_lcd_config { + char panel_name[16]; + char ctrl_name[16]; + s16 nreset_gpio; + u8 data_lines; +}; + +struct device; +struct fb_info; +struct omap_backlight_config { + int default_intensity; + int (*set_power)(struct device *dev, int state); + int (*check_fb)(struct fb_info *fb); +}; + +struct omap_fbmem_config { + u32 start; + u32 size; +}; + +struct omap_pwm_led_platform_data { + const char *name; + int intensity_timer; + int blink_timer; + void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off); +}; + +/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */ +struct omap_gpio_switch_config { + char name[12]; + u16 gpio; + int flags:4; + int type:4; + int key_code:24; /* Linux key code */ +}; + +struct omap_uart_config { + /* Bit field of UARTs present; bit 0 --> UART1 */ + unsigned int enabled_uarts; +}; + + +struct omap_flash_part_config { + char part_table[0]; +}; + +struct omap_boot_reason_config { + char reason_str[12]; +}; + +struct omap_version_config { + char component[12]; + char version[12]; +}; + + +#include <mach/board-nokia.h> + +struct omap_board_config_entry { + u16 tag; + u16 len; + u8 data[0]; +}; + +struct omap_board_config_kernel { + u16 tag; + const void *data; +}; + +extern const void *__omap_get_config(u16 tag, size_t len, int nr); + +#define omap_get_config(tag, type) \ + ((const type *) __omap_get_config((tag), sizeof(type), 0)) +#define omap_get_nr_config(tag, type, nr) \ + ((const type *) __omap_get_config((tag), sizeof(type), (nr))) + +extern const void *omap_get_var_config(u16 tag, size_t *len); + +extern struct omap_board_config_kernel *omap_board_config; +extern int omap_board_config_size; + + +/* for TI reference platforms sharing the same debug card */ +extern int debug_card_init(u32 addr, unsigned gpio); + +#endif diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h new file mode 100644 index 000000000000..92f7c7238fcd --- /dev/null +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -0,0 +1,162 @@ +/* + * arch/arm/plat-omap/include/mach/clock.h + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_OMAP_CLOCK_H +#define __ARCH_ARM_OMAP_CLOCK_H + +struct module; +struct clk; + +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + +struct clksel_rate { + u8 div; + u32 val; + u8 flags; +}; + +struct clksel { + struct clk *parent; + const struct clksel_rate *rates; +}; + +struct dpll_data { + void __iomem *mult_div1_reg; + u32 mult_mask; + u32 div1_mask; + u16 last_rounded_m; + u8 last_rounded_n; + unsigned long last_rounded_rate; + unsigned int rate_tolerance; + u16 max_multiplier; + u8 max_divider; + u32 max_tolerance; +# if defined(CONFIG_ARCH_OMAP3) + u8 modes; + void __iomem *control_reg; + u32 enable_mask; + u8 auto_recal_bit; + u8 recal_en_bit; + u8 recal_st_bit; + void __iomem *autoidle_reg; + u32 autoidle_mask; + void __iomem *idlest_reg; + u8 idlest_bit; +# endif +}; + +#endif + +struct clk { + struct list_head node; + struct module *owner; + const char *name; + int id; + struct clk *parent; + unsigned long rate; + __u32 flags; + void __iomem *enable_reg; + __u8 enable_bit; + __s8 usecount; + void (*recalc)(struct clk *); + int (*set_rate)(struct clk *, unsigned long); + long (*round_rate)(struct clk *, unsigned long); + void (*init)(struct clk *); + int (*enable)(struct clk *); + void (*disable)(struct clk *); +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + u8 fixed_div; + void __iomem *clksel_reg; + u32 clksel_mask; + const struct clksel *clksel; + struct dpll_data *dpll_data; +#else + __u8 rate_offset; + __u8 src_offset; +#endif +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) + struct dentry *dent; /* For visible tree hierarchy */ +#endif +}; + +struct cpufreq_frequency_table; + +struct clk_functions { + int (*clk_enable)(struct clk *clk); + void (*clk_disable)(struct clk *clk); + long (*clk_round_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_parent)(struct clk *clk, struct clk *parent); + struct clk * (*clk_get_parent)(struct clk *clk); + void (*clk_allow_idle)(struct clk *clk); + void (*clk_deny_idle)(struct clk *clk); + void (*clk_disable_unused)(struct clk *clk); +#ifdef CONFIG_CPU_FREQ + void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **); +#endif +}; + +extern unsigned int mpurate; + +extern int clk_init(struct clk_functions * custom_clocks); +extern int clk_register(struct clk *clk); +extern void clk_unregister(struct clk *clk); +extern void propagate_rate(struct clk *clk); +extern void recalculate_root_clocks(void); +extern void followparent_recalc(struct clk * clk); +extern void clk_allow_idle(struct clk *clk); +extern void clk_deny_idle(struct clk *clk); +extern int clk_get_usecount(struct clk *clk); +extern void clk_enable_init_clocks(void); + +/* Clock flags */ +#define RATE_CKCTL (1 << 0) /* Main fixed ratio clocks */ +#define RATE_FIXED (1 << 1) /* Fixed clock rate */ +#define RATE_PROPAGATES (1 << 2) /* Program children too */ +#define VIRTUAL_CLOCK (1 << 3) /* Composite clock from table */ +#define ALWAYS_ENABLED (1 << 4) /* Clock cannot be disabled */ +#define ENABLE_REG_32BIT (1 << 5) /* Use 32-bit access */ +#define VIRTUAL_IO_ADDRESS (1 << 6) /* Clock in virtual address */ +#define CLOCK_IDLE_CONTROL (1 << 7) +#define CLOCK_NO_IDLE_PARENT (1 << 8) +#define DELAYED_APP (1 << 9) /* Delay application of clock */ +#define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */ +#define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */ +#define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */ +/* bits 13-20 are currently free */ +#define CLOCK_IN_OMAP310 (1 << 21) +#define CLOCK_IN_OMAP730 (1 << 22) +#define CLOCK_IN_OMAP1510 (1 << 23) +#define CLOCK_IN_OMAP16XX (1 << 24) +#define CLOCK_IN_OMAP242X (1 << 25) +#define CLOCK_IN_OMAP243X (1 << 26) +#define CLOCK_IN_OMAP343X (1 << 27) /* clocks common to all 343X */ +#define PARENT_CONTROLS_CLOCK (1 << 28) +#define CLOCK_IN_OMAP3430ES1 (1 << 29) /* 3430ES1 clocks only */ +#define CLOCK_IN_OMAP3430ES2 (1 << 30) /* 3430ES2 clocks only */ + +/* Clksel_rate flags */ +#define DEFAULT_RATE (1 << 0) +#define RATE_IN_242X (1 << 1) +#define RATE_IN_243X (1 << 2) +#define RATE_IN_343X (1 << 3) /* rates common to all 343X */ +#define RATE_IN_3430ES2 (1 << 4) /* 3430ES2 rates only */ + +#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) + + +/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */ +#define CORE_CLK_SRC_32K 0 +#define CORE_CLK_SRC_DPLL 1 +#define CORE_CLK_SRC_DPLL_X2 2 + +#endif diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h new file mode 100644 index 000000000000..06093112b665 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/common.h @@ -0,0 +1,69 @@ +/* + * arch/arm/plat-omap/include/mach/common.h + * + * Header for code common to all OMAP machines. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H +#define __ARCH_ARM_MACH_OMAP_COMMON_H + +#include <linux/i2c.h> + +struct sys_timer; + +extern void omap_map_common_io(void); +extern struct sys_timer omap_timer; +extern void omap_serial_init(void); +#ifdef CONFIG_I2C_OMAP +extern int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len); +#else +static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + return 0; +} +#endif + +/* IO bases for various OMAP processors */ +struct omap_globals { + void __iomem *tap; /* Control module ID code */ + void __iomem *sdrc; /* SDRAM Controller */ + void __iomem *sms; /* SDRAM Memory Scheduler */ + void __iomem *ctrl; /* System Control Module */ + void __iomem *prm; /* Power and Reset Management */ + void __iomem *cm; /* Clock Management */ +}; + +void omap2_set_globals_242x(void); +void omap2_set_globals_243x(void); +void omap2_set_globals_343x(void); + +/* These get called from omap2_set_globals_xxxx(), do not call these */ +void omap2_set_globals_memory(struct omap_globals *); +void omap2_set_globals_control(struct omap_globals *); +void omap2_set_globals_prcm(struct omap_globals *); + +#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h new file mode 100644 index 000000000000..e3fd62d9a995 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/control.h @@ -0,0 +1,189 @@ +#ifndef __ASM_ARCH_CONTROL_H +#define __ASM_ARCH_CONTROL_H + +/* + * arch/arm/plat-omap/include/mach/control.h + * + * OMAP2/3 System Control Module definitions + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Copyright (C) 2007 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#include <mach/io.h> + +#define OMAP242X_CTRL_REGADDR(reg) \ + (void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) +#define OMAP243X_CTRL_REGADDR(reg) \ + (void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) +#define OMAP343X_CTRL_REGADDR(reg) \ + (void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) + +/* + * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for + * OMAP24XX and OMAP34XX. + */ + +/* Control submodule offsets */ + +#define OMAP2_CONTROL_INTERFACE 0x000 +#define OMAP2_CONTROL_PADCONFS 0x030 +#define OMAP2_CONTROL_GENERAL 0x270 +#define OMAP343X_CONTROL_MEM_WKUP 0x600 +#define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00 +#define OMAP343X_CONTROL_GENERAL_WKUP 0xa60 + +/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */ + +#define OMAP2_CONTROL_SYSCONFIG (OMAP2_CONTROL_INTERFACE + 0x10) + +/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */ +#define OMAP2_CONTROL_DEVCONF0 (OMAP2_CONTROL_GENERAL + 0x0004) +#define OMAP2_CONTROL_MSUSPENDMUX_0 (OMAP2_CONTROL_GENERAL + 0x0020) +#define OMAP2_CONTROL_MSUSPENDMUX_1 (OMAP2_CONTROL_GENERAL + 0x0024) +#define OMAP2_CONTROL_MSUSPENDMUX_2 (OMAP2_CONTROL_GENERAL + 0x0028) +#define OMAP2_CONTROL_MSUSPENDMUX_3 (OMAP2_CONTROL_GENERAL + 0x002c) +#define OMAP2_CONTROL_MSUSPENDMUX_4 (OMAP2_CONTROL_GENERAL + 0x0030) +#define OMAP2_CONTROL_MSUSPENDMUX_5 (OMAP2_CONTROL_GENERAL + 0x0034) +#define OMAP2_CONTROL_SEC_CTRL (OMAP2_CONTROL_GENERAL + 0x0040) +#define OMAP2_CONTROL_RPUB_KEY_H_0 (OMAP2_CONTROL_GENERAL + 0x0090) +#define OMAP2_CONTROL_RPUB_KEY_H_1 (OMAP2_CONTROL_GENERAL + 0x0094) +#define OMAP2_CONTROL_RPUB_KEY_H_2 (OMAP2_CONTROL_GENERAL + 0x0098) +#define OMAP2_CONTROL_RPUB_KEY_H_3 (OMAP2_CONTROL_GENERAL + 0x009c) + +/* 242x-only CONTROL_GENERAL register offsets */ +#define OMAP242X_CONTROL_DEVCONF OMAP2_CONTROL_DEVCONF0 /* match TRM */ +#define OMAP242X_CONTROL_OCM_RAM_PERM (OMAP2_CONTROL_GENERAL + 0x0068) + +/* 243x-only CONTROL_GENERAL register offsets */ +/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */ +#define OMAP243X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0078) +#define OMAP243X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x007c) +#define OMAP243X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) +#define OMAP243X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) +#define OMAP243X_CONTROL_IVA2_GEMCFG (OMAP2_CONTROL_GENERAL + 0x0198) + +/* 24xx-only CONTROL_GENERAL register offsets */ +#define OMAP24XX_CONTROL_DEBOBS (OMAP2_CONTROL_GENERAL + 0x0000) +#define OMAP24XX_CONTROL_EMU_SUPPORT (OMAP2_CONTROL_GENERAL + 0x0008) +#define OMAP24XX_CONTROL_SEC_TEST (OMAP2_CONTROL_GENERAL + 0x0044) +#define OMAP24XX_CONTROL_PSA_CTRL (OMAP2_CONTROL_GENERAL + 0x0048) +#define OMAP24XX_CONTROL_PSA_CMD (OMAP2_CONTROL_GENERAL + 0x004c) +#define OMAP24XX_CONTROL_PSA_VALUE (OMAP2_CONTROL_GENERAL + 0x0050) +#define OMAP24XX_CONTROL_SEC_EMU (OMAP2_CONTROL_GENERAL + 0x0060) +#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064) +#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c) +#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070) +#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074) +#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) +#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) +#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088) +#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x008c) +#define OMAP24XX_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a0) +#define OMAP24XX_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00a4) +#define OMAP24XX_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00a8) +#define OMAP24XX_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00ac) +#define OMAP24XX_CONTROL_CUST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00b0) +#define OMAP24XX_CONTROL_CUST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00b4) +#define OMAP24XX_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c0) +#define OMAP24XX_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00c4) +#define OMAP24XX_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00c8) +#define OMAP24XX_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00cc) +#define OMAP24XX_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d0) +#define OMAP24XX_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00d4) +#define OMAP24XX_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00d8) +#define OMAP24XX_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00dc) +#define OMAP24XX_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e0) +#define OMAP24XX_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00e4) + +/* 34xx-only CONTROL_GENERAL register offsets */ +#define OMAP343X_CONTROL_PADCONF_OFF (OMAP2_CONTROL_GENERAL + 0x0000) +#define OMAP343X_CONTROL_MEM_DFTRW0 (OMAP2_CONTROL_GENERAL + 0x0008) +#define OMAP343X_CONTROL_MEM_DFTRW1 (OMAP2_CONTROL_GENERAL + 0x000c) +#define OMAP343X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0068) +#define OMAP343X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x006c) +#define OMAP343X_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0070) +#define OMAP343X_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0074) +#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG (OMAP2_CONTROL_GENERAL + 0x0078) +#define OMAP343X_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) +#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) +#define OMAP343X_CONTROL_RPUB_KEY_H_4 (OMAP2_CONTROL_GENERAL + 0x00a0) +#define OMAP343X_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a8) +#define OMAP343X_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00ac) +#define OMAP343X_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00b0) +#define OMAP343X_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00b4) +#define OMAP343X_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c8) +#define OMAP343X_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00cc) +#define OMAP343X_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00d0) +#define OMAP343X_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00d4) +#define OMAP343X_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d8) +#define OMAP343X_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00dc) +#define OMAP343X_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00e0) +#define OMAP343X_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00e4) +#define OMAP343X_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e8) +#define OMAP343X_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00ec) +#define OMAP343X_CONTROL_TEST_KEY_10 (OMAP2_CONTROL_GENERAL + 0x00f0) +#define OMAP343X_CONTROL_TEST_KEY_11 (OMAP2_CONTROL_GENERAL + 0x00f4) +#define OMAP343X_CONTROL_TEST_KEY_12 (OMAP2_CONTROL_GENERAL + 0x00f8) +#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc) +#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) +#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) + +/* + * REVISIT: This list of registers is not comprehensive - there are more + * that should be added. + */ + +/* + * Control module register bit defines - these should eventually go into + * their own regbits file. Some of these will be complicated, depending + * on the device type (general-purpose, emulator, test, secure, bad, other) + * and the security mode (secure, non-secure, don't care) + */ +/* CONTROL_DEVCONF0 bits */ +#define OMAP24XX_USBSTANDBYCTRL (1 << 15) +#define OMAP2_MCBSP2_CLKS_MASK (1 << 6) +#define OMAP2_MCBSP1_CLKS_MASK (1 << 2) + +/* CONTROL_DEVCONF1 bits */ +#define OMAP2_MCBSP5_CLKS_MASK (1 << 4) /* > 242x */ +#define OMAP2_MCBSP4_CLKS_MASK (1 << 2) /* > 242x */ +#define OMAP2_MCBSP3_CLKS_MASK (1 << 0) /* > 242x */ + +/* CONTROL_STATUS bits */ +#define OMAP2_DEVICETYPE_MASK (0x7 << 8) +#define OMAP2_SYSBOOT_5_MASK (1 << 5) +#define OMAP2_SYSBOOT_4_MASK (1 << 4) +#define OMAP2_SYSBOOT_3_MASK (1 << 3) +#define OMAP2_SYSBOOT_2_MASK (1 << 2) +#define OMAP2_SYSBOOT_1_MASK (1 << 1) +#define OMAP2_SYSBOOT_0_MASK (1 << 0) + +#ifndef __ASSEMBLY__ +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +extern void __iomem *omap_ctrl_base_get(void); +extern u8 omap_ctrl_readb(u16 offset); +extern u16 omap_ctrl_readw(u16 offset); +extern u32 omap_ctrl_readl(u16 offset); +extern void omap_ctrl_writeb(u8 val, u16 offset); +extern void omap_ctrl_writew(u16 val, u16 offset); +extern void omap_ctrl_writel(u32 val, u16 offset); +#else +#define omap_ctrl_base_get() 0 +#define omap_ctrl_readb(x) 0 +#define omap_ctrl_readw(x) 0 +#define omap_ctrl_readl(x) 0 +#define omap_ctrl_writeb(x, y) WARN_ON(1) +#define omap_ctrl_writew(x, y) WARN_ON(1) +#define omap_ctrl_writel(x, y) WARN_ON(1) +#endif +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_ARCH_CONTROL_H */ + diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h new file mode 100644 index 000000000000..05aee0eda34f --- /dev/null +++ b/arch/arm/plat-omap/include/mach/cpu.h @@ -0,0 +1,402 @@ +/* + * arch/arm/plat-omap/include/mach/cpu.h + * + * OMAP cpu type detection + * + * Copyright (C) 2004, 2008 Nokia Corporation + * + * Written by Tony Lindgren <tony.lindgren@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_OMAP_CPU_H +#define __ASM_ARCH_OMAP_CPU_H + +struct omap_chip_id { + u8 oc; +}; + +#define OMAP_CHIP_INIT(x) { .oc = x } + +extern unsigned int system_rev; + +#define omap2_cpu_rev() ((system_rev >> 12) & 0x0f) + +/* + * Test if multicore OMAP support is needed + */ +#undef MULTI_OMAP1 +#undef MULTI_OMAP2 +#undef OMAP_NAME + +#ifdef CONFIG_ARCH_OMAP730 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap730 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP15XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap1510 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP16XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap16xx +# endif +#endif +#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)) +# if (defined(OMAP_NAME) || defined(MULTI_OMAP1)) +# error "OMAP1 and OMAP2 can't be selected at the same time" +# endif +#endif +#ifdef CONFIG_ARCH_OMAP2420 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap2420 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP2430 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap2430 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP3430 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap3430 +# endif +#endif + +/* + * Macros to group OMAP into cpu classes. + * These can be used in most places. + * cpu_is_omap7xx(): True for OMAP730 + * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 + * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 + * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 + * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 + * cpu_is_omap243x(): True for OMAP2430 + * cpu_is_omap343x(): True for OMAP3430 + */ +#define GET_OMAP_CLASS ((system_rev >> 24) & 0xff) + +#define IS_OMAP_CLASS(class, id) \ +static inline int is_omap ##class (void) \ +{ \ + return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_OMAP_SUBCLASS ((system_rev >> 20) & 0x0fff) + +#define IS_OMAP_SUBCLASS(subclass, id) \ +static inline int is_omap ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + +IS_OMAP_CLASS(7xx, 0x07) +IS_OMAP_CLASS(15xx, 0x15) +IS_OMAP_CLASS(16xx, 0x16) +IS_OMAP_CLASS(24xx, 0x24) +IS_OMAP_CLASS(34xx, 0x34) + +IS_OMAP_SUBCLASS(242x, 0x242) +IS_OMAP_SUBCLASS(243x, 0x243) +IS_OMAP_SUBCLASS(343x, 0x343) + +#define cpu_is_omap7xx() 0 +#define cpu_is_omap15xx() 0 +#define cpu_is_omap16xx() 0 +#define cpu_is_omap24xx() 0 +#define cpu_is_omap242x() 0 +#define cpu_is_omap243x() 0 +#define cpu_is_omap34xx() 0 +#define cpu_is_omap343x() 0 + +#if defined(MULTI_OMAP1) +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() is_omap15xx() +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() is_omap16xx() +# endif +#else +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() 1 +# endif +#endif + +#if defined(MULTI_OMAP2) +# if defined(CONFIG_ARCH_OMAP24XX) +# undef cpu_is_omap24xx +# undef cpu_is_omap242x +# undef cpu_is_omap243x +# define cpu_is_omap24xx() is_omap24xx() +# define cpu_is_omap242x() is_omap242x() +# define cpu_is_omap243x() is_omap243x() +# endif +# if defined(CONFIG_ARCH_OMAP34XX) +# undef cpu_is_omap34xx +# undef cpu_is_omap343x +# define cpu_is_omap34xx() is_omap34xx() +# define cpu_is_omap343x() is_omap343x() +# endif +#else +# if defined(CONFIG_ARCH_OMAP24XX) +# undef cpu_is_omap24xx +# define cpu_is_omap24xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP2420) +# undef cpu_is_omap242x +# define cpu_is_omap242x() 1 +# endif +# if defined(CONFIG_ARCH_OMAP2430) +# undef cpu_is_omap243x +# define cpu_is_omap243x() 1 +# endif +# if defined(CONFIG_ARCH_OMAP34XX) +# undef cpu_is_omap34xx +# define cpu_is_omap34xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP3430) +# undef cpu_is_omap343x +# define cpu_is_omap343x() 1 +# endif +#endif + +/* + * Macros to detect individual cpu types. + * These are only rarely needed. + * cpu_is_omap330(): True for OMAP330 + * cpu_is_omap730(): True for OMAP730 + * cpu_is_omap1510(): True for OMAP1510 + * cpu_is_omap1610(): True for OMAP1610 + * cpu_is_omap1611(): True for OMAP1611 + * cpu_is_omap5912(): True for OMAP5912 + * cpu_is_omap1621(): True for OMAP1621 + * cpu_is_omap1710(): True for OMAP1710 + * cpu_is_omap2420(): True for OMAP2420 + * cpu_is_omap2422(): True for OMAP2422 + * cpu_is_omap2423(): True for OMAP2423 + * cpu_is_omap2430(): True for OMAP2430 + * cpu_is_omap3430(): True for OMAP3430 + */ +#define GET_OMAP_TYPE ((system_rev >> 16) & 0xffff) + +#define IS_OMAP_TYPE(type, id) \ +static inline int is_omap ##type (void) \ +{ \ + return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ +} + +IS_OMAP_TYPE(310, 0x0310) +IS_OMAP_TYPE(730, 0x0730) +IS_OMAP_TYPE(1510, 0x1510) +IS_OMAP_TYPE(1610, 0x1610) +IS_OMAP_TYPE(1611, 0x1611) +IS_OMAP_TYPE(5912, 0x1611) +IS_OMAP_TYPE(1621, 0x1621) +IS_OMAP_TYPE(1710, 0x1710) +IS_OMAP_TYPE(2420, 0x2420) +IS_OMAP_TYPE(2422, 0x2422) +IS_OMAP_TYPE(2423, 0x2423) +IS_OMAP_TYPE(2430, 0x2430) +IS_OMAP_TYPE(3430, 0x3430) + +#define cpu_is_omap310() 0 +#define cpu_is_omap730() 0 +#define cpu_is_omap1510() 0 +#define cpu_is_omap1610() 0 +#define cpu_is_omap5912() 0 +#define cpu_is_omap1611() 0 +#define cpu_is_omap1621() 0 +#define cpu_is_omap1710() 0 +#define cpu_is_omap2420() 0 +#define cpu_is_omap2422() 0 +#define cpu_is_omap2423() 0 +#define cpu_is_omap2430() 0 +#define cpu_is_omap3430() 0 + +#if defined(MULTI_OMAP1) +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap730 +# define cpu_is_omap730() is_omap730() +# endif +#else +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap730 +# define cpu_is_omap730() 1 +# endif +#endif + +/* + * Whether we have MULTI_OMAP1 or not, we still need to distinguish + * between 330 vs. 1510 and 1611B/5912 vs. 1710. + */ +#if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap310 +# undef cpu_is_omap1510 +# define cpu_is_omap310() is_omap310() +# define cpu_is_omap1510() is_omap1510() +#endif + +#if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap1610 +# undef cpu_is_omap1611 +# undef cpu_is_omap5912 +# undef cpu_is_omap1621 +# undef cpu_is_omap1710 +# define cpu_is_omap1610() is_omap1610() +# define cpu_is_omap1611() is_omap1611() +# define cpu_is_omap5912() is_omap5912() +# define cpu_is_omap1621() is_omap1621() +# define cpu_is_omap1710() is_omap1710() +#endif + +#if defined(CONFIG_ARCH_OMAP24XX) +# undef cpu_is_omap2420 +# undef cpu_is_omap2422 +# undef cpu_is_omap2423 +# undef cpu_is_omap2430 +# define cpu_is_omap2420() is_omap2420() +# define cpu_is_omap2422() is_omap2422() +# define cpu_is_omap2423() is_omap2423() +# define cpu_is_omap2430() is_omap2430() +#endif + +#if defined(CONFIG_ARCH_OMAP34XX) +# undef cpu_is_omap3430 +# define cpu_is_omap3430() is_omap3430() +#endif + +/* Macros to detect if we have OMAP1 or OMAP2 */ +#define cpu_class_is_omap1() (cpu_is_omap730() || cpu_is_omap15xx() || \ + cpu_is_omap16xx()) +#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx()) + +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +/* + * Macros to detect silicon revision of OMAP2/3 processors. + * is_sil_rev_greater_than: true if passed cpu type & its rev is greater. + * is_sil_rev_lesser_than: true if passed cpu type & its rev is lesser. + * is_sil_rev_equal_to: true if passed cpu type & its rev is equal. + * get_sil_rev: return the silicon rev value. + */ +#define get_sil_omap_type(rev) ((rev & 0xffff0000) >> 16) +#define get_sil_revision(rev) ((rev & 0x0000f000) >> 12) + +#define is_sil_rev_greater_than(rev) \ + ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \ + (get_sil_revision(system_rev) > get_sil_revision(rev))) + +#define is_sil_rev_less_than(rev) \ + ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \ + (get_sil_revision(system_rev) < get_sil_revision(rev))) + +#define is_sil_rev_equal_to(rev) \ + ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \ + (get_sil_revision(system_rev) == get_sil_revision(rev))) + +#define get_sil_rev() \ + get_sil_revision(system_rev) + +/* Various silicon macros defined here */ +#define OMAP2420_REV_ES1_0 0x24200000 +#define OMAP2420_REV_ES2_0 0x24201000 +#define OMAP2430_REV_ES1_0 0x24300000 +#define OMAP3430_REV_ES1_0 0x34300000 +#define OMAP3430_REV_ES2_0 0x34301000 +#define OMAP3430_REV_ES2_1 0x34302000 +#define OMAP3430_REV_ES2_2 0x34303000 + +/* + * omap_chip bits + * + * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is + * valid on all chips of that type. CHIP_IS_OMAP3430ES{1,2} indicates + * something that is only valid on that particular ES revision. + * + * These bits may be ORed together to indicate structures that are + * available on multiple chip types. + * + * To test whether a particular structure matches the current OMAP chip type, + * use omap_chip_is(). + * + */ +#define CHIP_IS_OMAP2420 (1 << 0) +#define CHIP_IS_OMAP2430 (1 << 1) +#define CHIP_IS_OMAP3430 (1 << 2) +#define CHIP_IS_OMAP3430ES1 (1 << 3) +#define CHIP_IS_OMAP3430ES2 (1 << 4) + +#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) + +int omap_chip_is(struct omap_chip_id oci); + + +/* + * Macro to detect device type i.e. EMU/HS/TST/GP/BAD + */ +#define DEVICE_TYPE_TEST 0 +#define DEVICE_TYPE_EMU 1 +#define DEVICE_TYPE_SEC 2 +#define DEVICE_TYPE_GP 3 +#define DEVICE_TYPE_BAD 4 + +#define get_device_type() ((system_rev & 0x700) >> 8) +#define is_device_type_test() (get_device_type() == DEVICE_TYPE_TEST) +#define is_device_type_emu() (get_device_type() == DEVICE_TYPE_EMU) +#define is_device_type_sec() (get_device_type() == DEVICE_TYPE_SEC) +#define is_device_type_gp() (get_device_type() == DEVICE_TYPE_GP) +#define is_device_type_bad() (get_device_type() == DEVICE_TYPE_BAD) + +void omap2_check_revision(void); + +#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */ + +#endif diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S new file mode 100644 index 000000000000..1b0039bdeb4e --- /dev/null +++ b/arch/arm/plat-omap/include/mach/debug-macro.S @@ -0,0 +1,58 @@ +/* arch/arm/plat-omap/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? +#ifdef CONFIG_ARCH_OMAP1 + moveq \rx, #0xff000000 @ physical base address + movne \rx, #0xfe000000 @ virtual base + orr \rx, \rx, #0x00fb0000 +#ifdef CONFIG_OMAP_LL_DEBUG_UART3 + orr \rx, \rx, #0x00009000 @ UART 3 +#endif +#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3) + orr \rx, \rx, #0x00000800 @ UART 2 & 3 +#endif + +#elif CONFIG_ARCH_OMAP2 + moveq \rx, #0x48000000 @ physical base address + movne \rx, #0xd8000000 @ virtual base + orr \rx, \rx, #0x0006a000 +#ifdef CONFIG_OMAP_LL_DEBUG_UART2 + add \rx, \rx, #0x00002000 @ UART 2 +#endif +#ifdef CONFIG_OMAP_LL_DEBUG_UART3 + add \rx, \rx, #0x00004000 @ UART 3 +#endif +#endif + .endm + + .macro senduart,rd,rx + strb \rd, [\rx] + .endm + + .macro busyuart,rd,rx +1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends + and \rd, \rd, #0x60 + teq \rd, #0x60 + beq 1002f + ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only + and \rd, \rd, #0x60 + teq \rd, #0x60 + bne 1001b +1002: + .endm + + .macro waituart,rd,rx + .endm diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h new file mode 100644 index 000000000000..54fe9665b182 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/dma.h @@ -0,0 +1,570 @@ +/* + * arch/arm/plat-omap/include/mach/dma.h + * + * Copyright (C) 2003 Nokia Corporation + * Author: Juha Yrjölä <juha.yrjola@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H + +/* Hardware registers for omap1 */ +#define OMAP1_DMA_BASE (0xfffed800) + +#define OMAP1_DMA_GCR 0x400 +#define OMAP1_DMA_GSCR 0x404 +#define OMAP1_DMA_GRST 0x408 +#define OMAP1_DMA_HW_ID 0x442 +#define OMAP1_DMA_PCH2_ID 0x444 +#define OMAP1_DMA_PCH0_ID 0x446 +#define OMAP1_DMA_PCH1_ID 0x448 +#define OMAP1_DMA_PCHG_ID 0x44a +#define OMAP1_DMA_PCHD_ID 0x44c +#define OMAP1_DMA_CAPS_0_U 0x44e +#define OMAP1_DMA_CAPS_0_L 0x450 +#define OMAP1_DMA_CAPS_1_U 0x452 +#define OMAP1_DMA_CAPS_1_L 0x454 +#define OMAP1_DMA_CAPS_2 0x456 +#define OMAP1_DMA_CAPS_3 0x458 +#define OMAP1_DMA_CAPS_4 0x45a +#define OMAP1_DMA_PCH2_SR 0x460 +#define OMAP1_DMA_PCH0_SR 0x480 +#define OMAP1_DMA_PCH1_SR 0x482 +#define OMAP1_DMA_PCHD_SR 0x4c0 + +/* Hardware registers for omap2 and omap3 */ +#define OMAP24XX_DMA4_BASE (L4_24XX_BASE + 0x56000) +#define OMAP34XX_DMA4_BASE (L4_34XX_BASE + 0x56000) + +#define OMAP_DMA4_REVISION 0x00 +#define OMAP_DMA4_GCR 0x78 +#define OMAP_DMA4_IRQSTATUS_L0 0x08 +#define OMAP_DMA4_IRQSTATUS_L1 0x0c +#define OMAP_DMA4_IRQSTATUS_L2 0x10 +#define OMAP_DMA4_IRQSTATUS_L3 0x14 +#define OMAP_DMA4_IRQENABLE_L0 0x18 +#define OMAP_DMA4_IRQENABLE_L1 0x1c +#define OMAP_DMA4_IRQENABLE_L2 0x20 +#define OMAP_DMA4_IRQENABLE_L3 0x24 +#define OMAP_DMA4_SYSSTATUS 0x28 +#define OMAP_DMA4_OCP_SYSCONFIG 0x2c +#define OMAP_DMA4_CAPS_0 0x64 +#define OMAP_DMA4_CAPS_2 0x6c +#define OMAP_DMA4_CAPS_3 0x70 +#define OMAP_DMA4_CAPS_4 0x74 + +#define OMAP1_LOGICAL_DMA_CH_COUNT 17 +#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */ + +/* Common channel specific registers for omap1 */ +#define OMAP1_DMA_CH_BASE(n) (0x40 * (n) + 0x00) +#define OMAP1_DMA_CSDP(n) (0x40 * (n) + 0x00) +#define OMAP1_DMA_CCR(n) (0x40 * (n) + 0x02) +#define OMAP1_DMA_CICR(n) (0x40 * (n) + 0x04) +#define OMAP1_DMA_CSR(n) (0x40 * (n) + 0x06) +#define OMAP1_DMA_CEN(n) (0x40 * (n) + 0x10) +#define OMAP1_DMA_CFN(n) (0x40 * (n) + 0x12) +#define OMAP1_DMA_CSFI(n) (0x40 * (n) + 0x14) +#define OMAP1_DMA_CSEI(n) (0x40 * (n) + 0x16) +#define OMAP1_DMA_CPC(n) (0x40 * (n) + 0x18) /* 15xx only */ +#define OMAP1_DMA_CSAC(n) (0x40 * (n) + 0x18) +#define OMAP1_DMA_CDAC(n) (0x40 * (n) + 0x1a) +#define OMAP1_DMA_CDEI(n) (0x40 * (n) + 0x1c) +#define OMAP1_DMA_CDFI(n) (0x40 * (n) + 0x1e) +#define OMAP1_DMA_CLNK_CTRL(n) (0x40 * (n) + 0x28) + +/* Common channel specific registers for omap2 */ +#define OMAP_DMA4_CH_BASE(n) (0x60 * (n) + 0x80) +#define OMAP_DMA4_CCR(n) (0x60 * (n) + 0x80) +#define OMAP_DMA4_CLNK_CTRL(n) (0x60 * (n) + 0x84) +#define OMAP_DMA4_CICR(n) (0x60 * (n) + 0x88) +#define OMAP_DMA4_CSR(n) (0x60 * (n) + 0x8c) +#define OMAP_DMA4_CSDP(n) (0x60 * (n) + 0x90) +#define OMAP_DMA4_CEN(n) (0x60 * (n) + 0x94) +#define OMAP_DMA4_CFN(n) (0x60 * (n) + 0x98) +#define OMAP_DMA4_CSEI(n) (0x60 * (n) + 0xa4) +#define OMAP_DMA4_CSFI(n) (0x60 * (n) + 0xa8) +#define OMAP_DMA4_CDEI(n) (0x60 * (n) + 0xac) +#define OMAP_DMA4_CDFI(n) (0x60 * (n) + 0xb0) +#define OMAP_DMA4_CSAC(n) (0x60 * (n) + 0xb4) +#define OMAP_DMA4_CDAC(n) (0x60 * (n) + 0xb8) + +/* Channel specific registers only on omap1 */ +#define OMAP1_DMA_CSSA_L(n) (0x40 * (n) + 0x08) +#define OMAP1_DMA_CSSA_U(n) (0x40 * (n) + 0x0a) +#define OMAP1_DMA_CDSA_L(n) (0x40 * (n) + 0x0c) +#define OMAP1_DMA_CDSA_U(n) (0x40 * (n) + 0x0e) +#define OMAP1_DMA_COLOR_L(n) (0x40 * (n) + 0x20) +#define OMAP1_DMA_COLOR_U(n) (0x40 * (n) + 0x22) +#define OMAP1_DMA_CCR2(n) (0x40 * (n) + 0x24) +#define OMAP1_DMA_LCH_CTRL(n) (0x40 * (n) + 0x2a) /* not on 15xx */ +#define OMAP1_DMA_CCEN(n) 0 +#define OMAP1_DMA_CCFN(n) 0 + +/* Channel specific registers only on omap2 */ +#define OMAP_DMA4_CSSA(n) (0x60 * (n) + 0x9c) +#define OMAP_DMA4_CDSA(n) (0x60 * (n) + 0xa0) +#define OMAP_DMA4_CCEN(n) (0x60 * (n) + 0xbc) +#define OMAP_DMA4_CCFN(n) (0x60 * (n) + 0xc0) +#define OMAP_DMA4_COLOR(n) (0x60 * (n) + 0xc4) + +/* Dummy defines to keep multi-omap compiles happy */ +#define OMAP1_DMA_REVISION 0 +#define OMAP1_DMA_IRQSTATUS_L0 0 +#define OMAP1_DMA_IRQENABLE_L0 0 +#define OMAP1_DMA_OCP_SYSCONFIG 0 +#define OMAP_DMA4_HW_ID 0 +#define OMAP_DMA4_CAPS_0_L 0 +#define OMAP_DMA4_CAPS_0_U 0 +#define OMAP_DMA4_CAPS_1_L 0 +#define OMAP_DMA4_CAPS_1_U 0 +#define OMAP_DMA4_GSCR 0 +#define OMAP_DMA4_CPC(n) 0 + +#define OMAP_DMA4_LCH_CTRL(n) 0 +#define OMAP_DMA4_COLOR_L(n) 0 +#define OMAP_DMA4_COLOR_U(n) 0 +#define OMAP_DMA4_CCR2(n) 0 +#define OMAP1_DMA_CSSA(n) 0 +#define OMAP1_DMA_CDSA(n) 0 +#define OMAP_DMA4_CSSA_L(n) 0 +#define OMAP_DMA4_CSSA_U(n) 0 +#define OMAP_DMA4_CDSA_L(n) 0 +#define OMAP_DMA4_CDSA_U(n) 0 + +/*----------------------------------------------------------------------------*/ + +/* DMA channels for omap1 */ +#define OMAP_DMA_NO_DEVICE 0 +#define OMAP_DMA_MCSI1_TX 1 +#define OMAP_DMA_MCSI1_RX 2 +#define OMAP_DMA_I2C_RX 3 +#define OMAP_DMA_I2C_TX 4 +#define OMAP_DMA_EXT_NDMA_REQ 5 +#define OMAP_DMA_EXT_NDMA_REQ2 6 +#define OMAP_DMA_UWIRE_TX 7 +#define OMAP_DMA_MCBSP1_TX 8 +#define OMAP_DMA_MCBSP1_RX 9 +#define OMAP_DMA_MCBSP3_TX 10 +#define OMAP_DMA_MCBSP3_RX 11 +#define OMAP_DMA_UART1_TX 12 +#define OMAP_DMA_UART1_RX 13 +#define OMAP_DMA_UART2_TX 14 +#define OMAP_DMA_UART2_RX 15 +#define OMAP_DMA_MCBSP2_TX 16 +#define OMAP_DMA_MCBSP2_RX 17 +#define OMAP_DMA_UART3_TX 18 +#define OMAP_DMA_UART3_RX 19 +#define OMAP_DMA_CAMERA_IF_RX 20 +#define OMAP_DMA_MMC_TX 21 +#define OMAP_DMA_MMC_RX 22 +#define OMAP_DMA_NAND 23 +#define OMAP_DMA_IRQ_LCD_LINE 24 +#define OMAP_DMA_MEMORY_STICK 25 +#define OMAP_DMA_USB_W2FC_RX0 26 +#define OMAP_DMA_USB_W2FC_RX1 27 +#define OMAP_DMA_USB_W2FC_RX2 28 +#define OMAP_DMA_USB_W2FC_TX0 29 +#define OMAP_DMA_USB_W2FC_TX1 30 +#define OMAP_DMA_USB_W2FC_TX2 31 + +/* These are only for 1610 */ +#define OMAP_DMA_CRYPTO_DES_IN 32 +#define OMAP_DMA_SPI_TX 33 +#define OMAP_DMA_SPI_RX 34 +#define OMAP_DMA_CRYPTO_HASH 35 +#define OMAP_DMA_CCP_ATTN 36 +#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 +#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 +#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 +#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 +#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 +#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 +#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 +#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 +#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 +#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 +#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 +#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 +#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 +#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 +#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 +#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 +#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 +#define OMAP_DMA_MMC2_TX 54 +#define OMAP_DMA_MMC2_RX 55 +#define OMAP_DMA_CRYPTO_DES_OUT 56 + +/* DMA channels for 24xx */ +#define OMAP24XX_DMA_NO_DEVICE 0 +#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */ +#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */ +#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */ +#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */ +#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */ +#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */ +#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */ +#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */ +#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */ +#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */ +#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */ +#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */ +#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */ +#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */ +#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */ +#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */ +#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */ +#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */ +#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */ +#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */ +#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ +#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ +#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ +#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ +#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ +#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ +#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ +#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ +#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */ +#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ +#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ +#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */ +#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */ +#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */ +#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */ +#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */ +#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */ +#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ +#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ +#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */ +#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */ +#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */ +#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */ +#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */ +#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */ +#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */ +#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */ +#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */ +#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */ +#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */ +#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */ +#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ +#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ +#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ +#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ +#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ +#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ +#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ +#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ +#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ +#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ +#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ +#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ +#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */ +#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */ +#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */ +#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */ +#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */ +#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */ +#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */ +#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */ +#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */ +#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */ +#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */ +#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */ +#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */ +#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */ +#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */ +#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */ +#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */ +#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */ +#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */ +#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */ +#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */ +#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */ +#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */ +#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */ +#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */ +#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ +#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ +#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */ +#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */ +#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */ +#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */ +#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */ +#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */ +#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ +#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ + +/*----------------------------------------------------------------------------*/ + +/* Hardware registers for LCD DMA */ +#define OMAP1510_DMA_LCD_BASE (0xfffedb00) +#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00) +#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02) +#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04) +#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06) +#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08) + +#define OMAP1610_DMA_LCD_BASE (0xfffee300) +#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0) +#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2) +#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4) +#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8) +#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca) +#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc) +#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce) +#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0) +#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2) +#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4) +#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6) +#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8) +#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda) +#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0) +#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4) +#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea) +#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4) + +#define OMAP1_DMA_TOUT_IRQ (1 << 0) +#define OMAP_DMA_DROP_IRQ (1 << 1) +#define OMAP_DMA_HALF_IRQ (1 << 2) +#define OMAP_DMA_FRAME_IRQ (1 << 3) +#define OMAP_DMA_LAST_IRQ (1 << 4) +#define OMAP_DMA_BLOCK_IRQ (1 << 5) +#define OMAP1_DMA_SYNC_IRQ (1 << 6) +#define OMAP2_DMA_PKT_IRQ (1 << 7) +#define OMAP2_DMA_TRANS_ERR_IRQ (1 << 8) +#define OMAP2_DMA_SECURE_ERR_IRQ (1 << 9) +#define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10) +#define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11) + +#define OMAP_DMA_DATA_TYPE_S8 0x00 +#define OMAP_DMA_DATA_TYPE_S16 0x01 +#define OMAP_DMA_DATA_TYPE_S32 0x02 + +#define OMAP_DMA_SYNC_ELEMENT 0x00 +#define OMAP_DMA_SYNC_FRAME 0x01 +#define OMAP_DMA_SYNC_BLOCK 0x02 +#define OMAP_DMA_SYNC_PACKET 0x03 + +#define OMAP_DMA_SRC_SYNC 0x01 +#define OMAP_DMA_DST_SYNC 0x00 + +#define OMAP_DMA_PORT_EMIFF 0x00 +#define OMAP_DMA_PORT_EMIFS 0x01 +#define OMAP_DMA_PORT_OCP_T1 0x02 +#define OMAP_DMA_PORT_TIPB 0x03 +#define OMAP_DMA_PORT_OCP_T2 0x04 +#define OMAP_DMA_PORT_MPUI 0x05 + +#define OMAP_DMA_AMODE_CONSTANT 0x00 +#define OMAP_DMA_AMODE_POST_INC 0x01 +#define OMAP_DMA_AMODE_SINGLE_IDX 0x02 +#define OMAP_DMA_AMODE_DOUBLE_IDX 0x03 + +#define DMA_DEFAULT_FIFO_DEPTH 0x10 +#define DMA_DEFAULT_ARB_RATE 0x01 +/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */ +#define DMA_THREAD_RESERVE_NORM (0x00 << 12) /* Def */ +#define DMA_THREAD_RESERVE_ONET (0x01 << 12) +#define DMA_THREAD_RESERVE_TWOT (0x02 << 12) +#define DMA_THREAD_RESERVE_THREET (0x03 << 12) +#define DMA_THREAD_FIFO_NONE (0x00 << 14) /* Def */ +#define DMA_THREAD_FIFO_75 (0x01 << 14) +#define DMA_THREAD_FIFO_25 (0x02 << 14) +#define DMA_THREAD_FIFO_50 (0x03 << 14) + +/* Chaining modes*/ +#ifndef CONFIG_ARCH_OMAP1 +#define OMAP_DMA_STATIC_CHAIN 0x1 +#define OMAP_DMA_DYNAMIC_CHAIN 0x2 +#define OMAP_DMA_CHAIN_ACTIVE 0x1 +#define OMAP_DMA_CHAIN_INACTIVE 0x0 +#endif + +#define DMA_CH_PRIO_HIGH 0x1 +#define DMA_CH_PRIO_LOW 0x0 /* Def */ + +/* LCD DMA block numbers */ +enum { + OMAP_LCD_DMA_B1_TOP, + OMAP_LCD_DMA_B1_BOTTOM, + OMAP_LCD_DMA_B2_TOP, + OMAP_LCD_DMA_B2_BOTTOM +}; + +enum omap_dma_burst_mode { + OMAP_DMA_DATA_BURST_DIS = 0, + OMAP_DMA_DATA_BURST_4, + OMAP_DMA_DATA_BURST_8, + OMAP_DMA_DATA_BURST_16, +}; + +enum end_type { + OMAP_DMA_LITTLE_ENDIAN = 0, + OMAP_DMA_BIG_ENDIAN +}; + +enum omap_dma_color_mode { + OMAP_DMA_COLOR_DIS = 0, + OMAP_DMA_CONSTANT_FILL, + OMAP_DMA_TRANSPARENT_COPY +}; + +enum omap_dma_write_mode { + OMAP_DMA_WRITE_NON_POSTED = 0, + OMAP_DMA_WRITE_POSTED, + OMAP_DMA_WRITE_LAST_NON_POSTED +}; + +enum omap_dma_channel_mode { + OMAP_DMA_LCH_2D = 0, + OMAP_DMA_LCH_G, + OMAP_DMA_LCH_P, + OMAP_DMA_LCH_PD +}; + +struct omap_dma_channel_params { + int data_type; /* data type 8,16,32 */ + int elem_count; /* number of elements in a frame */ + int frame_count; /* number of frames in a element */ + + int src_port; /* Only on OMAP1 REVISIT: Is this needed? */ + int src_amode; /* constant, post increment, indexed, + double indexed */ + unsigned long src_start; /* source address : physical */ + int src_ei; /* source element index */ + int src_fi; /* source frame index */ + + int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */ + int dst_amode; /* constant, post increment, indexed, + double indexed */ + unsigned long dst_start; /* source address : physical */ + int dst_ei; /* source element index */ + int dst_fi; /* source frame index */ + + int trigger; /* trigger attached if the channel is + synchronized */ + int sync_mode; /* sycn on element, frame , block or packet */ + int src_or_dst_synch; /* source synch(1) or destination synch(0) */ + + int ie; /* interrupt enabled */ + + unsigned char read_prio;/* read priority */ + unsigned char write_prio;/* write priority */ + +#ifndef CONFIG_ARCH_OMAP1 + enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */ +#endif +}; + + +extern void omap_set_dma_priority(int lch, int dst_port, int priority); +extern int omap_request_dma(int dev_id, const char *dev_name, + void (*callback)(int lch, u16 ch_status, void *data), + void *data, int *dma_ch); +extern void omap_enable_dma_irq(int ch, u16 irq_bits); +extern void omap_disable_dma_irq(int ch, u16 irq_bits); +extern void omap_free_dma(int ch); +extern void omap_start_dma(int lch); +extern void omap_stop_dma(int lch); +extern void omap_set_dma_transfer_params(int lch, int data_type, + int elem_count, int frame_count, + int sync_mode, + int dma_trigger, int src_or_dst_synch); +extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, + u32 color); +extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode); +extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode); + +extern void omap_set_dma_src_params(int lch, int src_port, int src_amode, + unsigned long src_start, + int src_ei, int src_fi); +extern void omap_set_dma_src_index(int lch, int eidx, int fidx); +extern void omap_set_dma_src_data_pack(int lch, int enable); +extern void omap_set_dma_src_burst_mode(int lch, + enum omap_dma_burst_mode burst_mode); + +extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, + unsigned long dest_start, + int dst_ei, int dst_fi); +extern void omap_set_dma_dest_index(int lch, int eidx, int fidx); +extern void omap_set_dma_dest_data_pack(int lch, int enable); +extern void omap_set_dma_dest_burst_mode(int lch, + enum omap_dma_burst_mode burst_mode); + +extern void omap_set_dma_params(int lch, + struct omap_dma_channel_params *params); + +extern void omap_dma_link_lch(int lch_head, int lch_queue); +extern void omap_dma_unlink_lch(int lch_head, int lch_queue); + +extern int omap_set_dma_callback(int lch, + void (*callback)(int lch, u16 ch_status, void *data), + void *data); +extern dma_addr_t omap_get_dma_src_pos(int lch); +extern dma_addr_t omap_get_dma_dst_pos(int lch); +extern void omap_clear_dma(int lch); +extern int omap_get_dma_active_status(int lch); +extern int omap_dma_running(void); +extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth, + int tparams); +extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio, + unsigned char write_prio); +extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype); +extern void omap_set_dma_src_endian_type(int lch, enum end_type etype); +extern int omap_get_dma_index(int lch, int *ei, int *fi); + +/* Chaining APIs */ +#ifndef CONFIG_ARCH_OMAP1 +extern int omap_request_dma_chain(int dev_id, const char *dev_name, + void (*callback) (int chain_id, u16 ch_status, + void *data), + int *chain_id, int no_of_chans, + int chain_mode, + struct omap_dma_channel_params params); +extern int omap_free_dma_chain(int chain_id); +extern int omap_dma_chain_a_transfer(int chain_id, int src_start, + int dest_start, int elem_count, + int frame_count, void *callbk_data); +extern int omap_start_dma_chain_transfers(int chain_id); +extern int omap_stop_dma_chain_transfers(int chain_id); +extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi); +extern int omap_get_dma_chain_dst_pos(int chain_id); +extern int omap_get_dma_chain_src_pos(int chain_id); + +extern int omap_modify_dma_chain_params(int chain_id, + struct omap_dma_channel_params params); +extern int omap_dma_chain_status(int chain_id); +#endif + +/* LCD DMA functions */ +extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data), + void *data); +extern void omap_free_lcd_dma(void); +extern void omap_setup_lcd_dma(void); +extern void omap_enable_lcd_dma(void); +extern void omap_stop_lcd_dma(void); +extern void omap_set_lcd_dma_ext_controller(int external); +extern void omap_set_lcd_dma_single_transfer(int single); +extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, + int data_type); +extern void omap_set_lcd_dma_b1_rotation(int rotate); +extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres); +extern void omap_set_lcd_dma_b1_mirror(int mirror); +extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale); + +#endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/mach/dmtimer.h new file mode 100644 index 000000000000..6dc703138210 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/dmtimer.h @@ -0,0 +1,84 @@ +/* + * arch/arm/plat-omap/include/mach/dmtimer.h + * + * OMAP Dual-Mode Timers + * + * Copyright (C) 2005 Nokia Corporation + * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com> + * PWM and clock framwork support by Timo Teras. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_DMTIMER_H +#define __ASM_ARCH_DMTIMER_H + +/* clock sources */ +#define OMAP_TIMER_SRC_SYS_CLK 0x00 +#define OMAP_TIMER_SRC_32_KHZ 0x01 +#define OMAP_TIMER_SRC_EXT_CLK 0x02 + +/* timer interrupt enable bits */ +#define OMAP_TIMER_INT_CAPTURE (1 << 2) +#define OMAP_TIMER_INT_OVERFLOW (1 << 1) +#define OMAP_TIMER_INT_MATCH (1 << 0) + +/* trigger types */ +#define OMAP_TIMER_TRIGGER_NONE 0x00 +#define OMAP_TIMER_TRIGGER_OVERFLOW 0x01 +#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02 + +struct omap_dm_timer; +struct clk; + +int omap_dm_timer_init(void); + +struct omap_dm_timer *omap_dm_timer_request(void); +struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); +void omap_dm_timer_free(struct omap_dm_timer *timer); +void omap_dm_timer_enable(struct omap_dm_timer *timer); +void omap_dm_timer_disable(struct omap_dm_timer *timer); + +int omap_dm_timer_get_irq(struct omap_dm_timer *timer); + +u32 omap_dm_timer_modify_idlect_mask(u32 inputmask); +struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer); + +void omap_dm_timer_trigger(struct omap_dm_timer *timer); +void omap_dm_timer_start(struct omap_dm_timer *timer); +void omap_dm_timer_stop(struct omap_dm_timer *timer); + +void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); +void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value); +void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value); +void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match); +void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger); +void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler); + +void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value); + +unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer); +void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value); +unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer); +void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value); + +int omap_dm_timers_active(void); + + +#endif /* __ASM_ARCH_DMTIMER_H */ diff --git a/arch/arm/plat-omap/include/mach/dsp_common.h b/arch/arm/plat-omap/include/mach/dsp_common.h new file mode 100644 index 000000000000..da97736f3efa --- /dev/null +++ b/arch/arm/plat-omap/include/mach/dsp_common.h @@ -0,0 +1,40 @@ +/* + * This file is part of OMAP DSP driver (DSP Gateway version 3.3.1) + * + * Copyright (C) 2004-2006 Nokia Corporation. All rights reserved. + * + * Contact: Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef ASM_ARCH_DSP_COMMON_H +#define ASM_ARCH_DSP_COMMON_H + +#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_OMAP_MMU_FWK) +extern void omap_dsp_request_mpui(void); +extern void omap_dsp_release_mpui(void); +extern int omap_dsp_request_mem(void); +extern int omap_dsp_release_mem(void); +#else +static inline int omap_dsp_request_mem(void) +{ + return 0; +} +#define omap_dsp_release_mem() do {} while (0) +#endif + +#endif /* ASM_ARCH_DSP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/mach/eac.h b/arch/arm/plat-omap/include/mach/eac.h new file mode 100644 index 000000000000..9e62cf030270 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/eac.h @@ -0,0 +1,100 @@ +/* + * arch/arm/plat-omap/include/mach2/eac.h + * + * Defines for Enhanced Audio Controller + * + * Contact: Jarkko Nikula <jarkko.nikula@nokia.com> + * + * Copyright (C) 2006 Nokia Corporation + * Copyright (C) 2004 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H +#define __ASM_ARM_ARCH_OMAP2_EAC_H + +#include <mach/io.h> +#include <mach/hardware.h> +#include <asm/irq.h> + +#include <sound/core.h> + +/* master codec clock source */ +#define EAC_MCLK_EXT_MASK 0x100 +enum eac_mclk_src { + EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */ + EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK, + EAC_MCLK_EXT_12288000, + EAC_MCLK_EXT_2x11289600, + EAC_MCLK_EXT_2x12288000, +}; + +/* codec port interface mode */ +enum eac_codec_mode { + EAC_CODEC_PCM, + EAC_CODEC_AC97, + EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */ + EAC_CODEC_I2S_SLAVE, +}; + +/* configuration structure for I2S mode */ +struct eac_i2s_conf { + /* if enabled, then first data slot (left channel) is signaled as + * positive level of frame sync EAC.AC_FS */ + unsigned polarity_changed_mode:1; + /* if enabled, then serial data starts one clock cycle after the + * of EAC.AC_FS for first audio slot */ + unsigned sync_delay_enable:1; +}; + +/* configuration structure for EAC codec port */ +struct eac_codec { + enum eac_mclk_src mclk_src; + + enum eac_codec_mode codec_mode; + union { + struct eac_i2s_conf i2s; + } codec_conf; + + int default_rate; /* audio sampling rate */ + + int (* set_power)(void *private_data, int dac, int adc); + int (* register_controls)(void *private_data, + struct snd_card *card); + const char *short_name; + + void *private_data; +}; + +/* structure for passing platform dependent data to the EAC driver */ +struct eac_platform_data { + int (* init)(struct device *eac_dev); + void (* cleanup)(struct device *eac_dev); + /* these callbacks are used to configure & control external MCLK + * source. NULL if not used */ + int (* enable_ext_clocks)(struct device *eac_dev); + void (* disable_ext_clocks)(struct device *eac_dev); +}; + +extern void omap_init_eac(struct eac_platform_data *pdata); + +extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec); +extern void eac_unregister_codec(struct device *eac_dev); + +extern int eac_set_mode(struct device *eac_dev, int play, int rec); + +#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */ diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S new file mode 100644 index 000000000000..d4e9043bf201 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/entry-macro.S @@ -0,0 +1,89 @@ +/* + * arch/arm/plat-omap/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for OMAP-based platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <mach/hardware.h> +#include <mach/io.h> +#include <mach/irqs.h> + +#if defined(CONFIG_ARCH_OMAP1) + +#if defined(CONFIG_ARCH_OMAP730) && \ + (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)) +#error "FIXME: OMAP730 doesn't support multiple-OMAP" +#elif defined(CONFIG_ARCH_OMAP730) +#define INT_IH2_IRQ INT_730_IH2_IRQ +#elif defined(CONFIG_ARCH_OMAP15XX) +#define INT_IH2_IRQ INT_1510_IH2_IRQ +#elif defined(CONFIG_ARCH_OMAP16XX) +#define INT_IH2_IRQ INT_1610_IH2_IRQ +#else +#warning "IH2 IRQ defaulted" +#define INT_IH2_IRQ INT_1510_IH2_IRQ +#endif + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, =IO_ADDRESS(OMAP_IH1_BASE) + ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET] + ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET] + mov \irqstat, #0xffffffff + bic \tmp, \irqstat, \tmp + tst \irqnr, \tmp + beq 1510f + + ldr \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET] + cmp \irqnr, #0 + ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] + cmpeq \irqnr, #INT_IH2_IRQ + ldreq \base, =IO_ADDRESS(OMAP_IH2_BASE) + ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] + addeqs \irqnr, \irqnr, #32 +1510: + .endm + +#elif defined(CONFIG_ARCH_OMAP24XX) + +#include <mach/omap24xx.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, =OMAP2_VA_IC_BASE + ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */ + cmp \irqnr, #0x0 + bne 2222f + ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */ + cmp \irqnr, #0x0 + bne 2222f + ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */ + cmp \irqnr, #0x0 +2222: + ldrne \irqnr, [\base, #IRQ_SIR_IRQ] + + .endm + + .macro irq_prio_table + .endm + +#endif diff --git a/arch/arm/plat-omap/include/mach/fpga.h b/arch/arm/plat-omap/include/mach/fpga.h new file mode 100644 index 000000000000..c92e4b42b289 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/fpga.h @@ -0,0 +1,197 @@ +/* + * arch/arm/plat-omap/include/mach/fpga.h + * + * Interrupt handler for OMAP-1510 FPGA + * + * Copyright (C) 2001 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * Copyright (C) 2002 MontaVista Software, Inc. + * + * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 + * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_OMAP_FPGA_H +#define __ASM_ARCH_OMAP_FPGA_H + +#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX) +extern void omap1510_fpga_init_irq(void); +#else +#define omap1510_fpga_init_irq() (0) +#endif + +#define fpga_read(reg) __raw_readb(reg) +#define fpga_write(val, reg) __raw_writeb(val, reg) + +/* + * --------------------------------------------------------------------------- + * H2/P2 Debug board FPGA + * --------------------------------------------------------------------------- + */ +/* maps in the FPGA registers and the ETHR registers */ +#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ +#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ +#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ + +#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) +#define H2P2_DBG_FPGA_FPGA_REV (H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ +#define H2P2_DBG_FPGA_BOARD_REV (H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ +#define H2P2_DBG_FPGA_GPIO (H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ +#define H2P2_DBG_FPGA_LEDS (H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ +#define H2P2_DBG_FPGA_MISC_INPUTS (H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ +#define H2P2_DBG_FPGA_LAN_STATUS (H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ +#define H2P2_DBG_FPGA_LAN_RESET (H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ + +/* NOTE: most boards don't have a static mapping for the FPGA ... */ +struct h2p2_dbg_fpga { + /* offset 0x00 */ + u16 smc91x[8]; + /* offset 0x10 */ + u16 fpga_rev; + u16 board_rev; + u16 gpio_outputs; + u16 leds; + /* offset 0x18 */ + u16 misc_inputs; + u16 lan_status; + u16 lan_reset; + u16 reserved0; + /* offset 0x20 */ + u16 ps2_data; + u16 ps2_ctrl; + /* plus also 4 rs232 ports ... */ +}; + +/* LEDs definition on debug board (16 LEDs, all physically green) */ +#define H2P2_DBG_FPGA_LED_GREEN (1 << 15) +#define H2P2_DBG_FPGA_LED_AMBER (1 << 14) +#define H2P2_DBG_FPGA_LED_RED (1 << 13) +#define H2P2_DBG_FPGA_LED_BLUE (1 << 12) +/* cpu0 load-meter LEDs */ +#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ... +#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 +#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) + +#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0) +#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1) + +/* + * --------------------------------------------------------------------------- + * OMAP-1510 FPGA + * --------------------------------------------------------------------------- + */ +#define OMAP1510_FPGA_BASE 0xE8000000 /* Virtual */ +#define OMAP1510_FPGA_SIZE SZ_4K +#define OMAP1510_FPGA_START 0x08000000 /* Physical */ + +/* Revision */ +#define OMAP1510_FPGA_REV_LOW (OMAP1510_FPGA_BASE + 0x0) +#define OMAP1510_FPGA_REV_HIGH (OMAP1510_FPGA_BASE + 0x1) + +#define OMAP1510_FPGA_LCD_PANEL_CONTROL (OMAP1510_FPGA_BASE + 0x2) +#define OMAP1510_FPGA_LED_DIGIT (OMAP1510_FPGA_BASE + 0x3) +#define INNOVATOR_FPGA_HID_SPI (OMAP1510_FPGA_BASE + 0x4) +#define OMAP1510_FPGA_POWER (OMAP1510_FPGA_BASE + 0x5) + +/* Interrupt status */ +#define OMAP1510_FPGA_ISR_LO (OMAP1510_FPGA_BASE + 0x6) +#define OMAP1510_FPGA_ISR_HI (OMAP1510_FPGA_BASE + 0x7) + +/* Interrupt mask */ +#define OMAP1510_FPGA_IMR_LO (OMAP1510_FPGA_BASE + 0x8) +#define OMAP1510_FPGA_IMR_HI (OMAP1510_FPGA_BASE + 0x9) + +/* Reset registers */ +#define OMAP1510_FPGA_HOST_RESET (OMAP1510_FPGA_BASE + 0xa) +#define OMAP1510_FPGA_RST (OMAP1510_FPGA_BASE + 0xb) + +#define OMAP1510_FPGA_AUDIO (OMAP1510_FPGA_BASE + 0xc) +#define OMAP1510_FPGA_DIP (OMAP1510_FPGA_BASE + 0xe) +#define OMAP1510_FPGA_FPGA_IO (OMAP1510_FPGA_BASE + 0xf) +#define OMAP1510_FPGA_UART1 (OMAP1510_FPGA_BASE + 0x14) +#define OMAP1510_FPGA_UART2 (OMAP1510_FPGA_BASE + 0x15) +#define OMAP1510_FPGA_OMAP1510_STATUS (OMAP1510_FPGA_BASE + 0x16) +#define OMAP1510_FPGA_BOARD_REV (OMAP1510_FPGA_BASE + 0x18) +#define OMAP1510P1_PPT_DATA (OMAP1510_FPGA_BASE + 0x100) +#define OMAP1510P1_PPT_STATUS (OMAP1510_FPGA_BASE + 0x101) +#define OMAP1510P1_PPT_CONTROL (OMAP1510_FPGA_BASE + 0x102) + +#define OMAP1510_FPGA_TOUCHSCREEN (OMAP1510_FPGA_BASE + 0x204) + +#define INNOVATOR_FPGA_INFO (OMAP1510_FPGA_BASE + 0x205) +#define INNOVATOR_FPGA_LCD_BRIGHT_LO (OMAP1510_FPGA_BASE + 0x206) +#define INNOVATOR_FPGA_LCD_BRIGHT_HI (OMAP1510_FPGA_BASE + 0x207) +#define INNOVATOR_FPGA_LED_GRN_LO (OMAP1510_FPGA_BASE + 0x208) +#define INNOVATOR_FPGA_LED_GRN_HI (OMAP1510_FPGA_BASE + 0x209) +#define INNOVATOR_FPGA_LED_RED_LO (OMAP1510_FPGA_BASE + 0x20a) +#define INNOVATOR_FPGA_LED_RED_HI (OMAP1510_FPGA_BASE + 0x20b) +#define INNOVATOR_FPGA_CAM_USB_CONTROL (OMAP1510_FPGA_BASE + 0x20c) +#define INNOVATOR_FPGA_EXP_CONTROL (OMAP1510_FPGA_BASE + 0x20d) +#define INNOVATOR_FPGA_ISR2 (OMAP1510_FPGA_BASE + 0x20e) +#define INNOVATOR_FPGA_IMR2 (OMAP1510_FPGA_BASE + 0x210) + +#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300) + +/* + * Power up Giga UART driver, turn on HID clock. + * Turn off BT power, since we're not using it and it + * draws power. + */ +#define OMAP1510_FPGA_RESET_VALUE 0x42 + +#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7) +#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6) +#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5) +#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4) +#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3) +#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2) +#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1) +#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0) + +/* + * Innovator/OMAP1510 FPGA HID register bit definitions + */ +#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */ +#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */ +#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */ +#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */ +#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */ +#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */ +#define OMAP1510_FPGA_HID_rsrvd (1<<6) +#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */ + +/* The FPGA IRQ is cascaded through GPIO_13 */ +#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13) + +/* IRQ Numbers for interrupts muxed through the FPGA */ +#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0) +#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1) +#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2) +#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3) +#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4) +#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5) +#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6) +#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7) +#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8) +#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9) +#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10) +#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11) +#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12) +#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13) +#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14) +#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15) +#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16) +#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17) +#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18) +#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19) +#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20) +#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21) +#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22) +#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23) + +#endif diff --git a/arch/arm/plat-omap/include/mach/gpio-switch.h b/arch/arm/plat-omap/include/mach/gpio-switch.h new file mode 100644 index 000000000000..10da0e07c0cf --- /dev/null +++ b/arch/arm/plat-omap/include/mach/gpio-switch.h @@ -0,0 +1,54 @@ +/* + * GPIO switch definitions + * + * Copyright (C) 2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_OMAP_GPIO_SWITCH_H +#define __ASM_ARCH_OMAP_GPIO_SWITCH_H + +#include <linux/types.h> + +/* Cover: + * high -> closed + * low -> open + * Connection: + * high -> connected + * low -> disconnected + * Activity: + * high -> active + * low -> inactive + * + */ +#define OMAP_GPIO_SWITCH_TYPE_COVER 0x0000 +#define OMAP_GPIO_SWITCH_TYPE_CONNECTION 0x0001 +#define OMAP_GPIO_SWITCH_TYPE_ACTIVITY 0x0002 +#define OMAP_GPIO_SWITCH_FLAG_INVERTED 0x0001 +#define OMAP_GPIO_SWITCH_FLAG_OUTPUT 0x0002 + +struct omap_gpio_switch { + const char *name; + s16 gpio; + unsigned flags:4; + unsigned type:4; + + /* Time in ms to debounce when transitioning from + * inactive state to active state. */ + u16 debounce_rising; + /* Same for transition from active to inactive state. */ + u16 debounce_falling; + + /* notify board-specific code about state changes */ + void (* notify)(void *data, int state); + void *notify_data; +}; + +/* Call at init time only */ +extern void omap_register_gpio_switches(const struct omap_gpio_switch *tbl, + int count); + +#endif diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h new file mode 100644 index 000000000000..94ce2780e8ee --- /dev/null +++ b/arch/arm/plat-omap/include/mach/gpio.h @@ -0,0 +1,122 @@ +/* + * arch/arm/plat-omap/include/mach/gpio.h + * + * OMAP GPIO handling defines and functions + * + * Copyright (C) 2003-2005 Nokia Corporation + * + * Written by Juha Yrjölä <juha.yrjola@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_OMAP_GPIO_H +#define __ASM_ARCH_OMAP_GPIO_H + +#include <mach/irqs.h> +#include <asm/io.h> + +#define OMAP_MPUIO_BASE (void __iomem *)0xfffb5000 + +#ifdef CONFIG_ARCH_OMAP730 +#define OMAP_MPUIO_INPUT_LATCH 0x00 +#define OMAP_MPUIO_OUTPUT 0x02 +#define OMAP_MPUIO_IO_CNTL 0x04 +#define OMAP_MPUIO_KBR_LATCH 0x08 +#define OMAP_MPUIO_KBC 0x0a +#define OMAP_MPUIO_GPIO_EVENT_MODE 0x0c +#define OMAP_MPUIO_GPIO_INT_EDGE 0x0e +#define OMAP_MPUIO_KBD_INT 0x10 +#define OMAP_MPUIO_GPIO_INT 0x12 +#define OMAP_MPUIO_KBD_MASKIT 0x14 +#define OMAP_MPUIO_GPIO_MASKIT 0x16 +#define OMAP_MPUIO_GPIO_DEBOUNCING 0x18 +#define OMAP_MPUIO_LATCH 0x1a +#else +#define OMAP_MPUIO_INPUT_LATCH 0x00 +#define OMAP_MPUIO_OUTPUT 0x04 +#define OMAP_MPUIO_IO_CNTL 0x08 +#define OMAP_MPUIO_KBR_LATCH 0x10 +#define OMAP_MPUIO_KBC 0x14 +#define OMAP_MPUIO_GPIO_EVENT_MODE 0x18 +#define OMAP_MPUIO_GPIO_INT_EDGE 0x1c +#define OMAP_MPUIO_KBD_INT 0x20 +#define OMAP_MPUIO_GPIO_INT 0x24 +#define OMAP_MPUIO_KBD_MASKIT 0x28 +#define OMAP_MPUIO_GPIO_MASKIT 0x2c +#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30 +#define OMAP_MPUIO_LATCH 0x34 +#endif + +#define OMAP34XX_NR_GPIOS 6 + +#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) +#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) + +#define OMAP_GPIO_IRQ(nr) (OMAP_GPIO_IS_MPUIO(nr) ? \ + IH_MPUIO_BASE + ((nr) & 0x0f) : \ + IH_GPIO_BASE + (nr)) + +extern int omap_gpio_init(void); /* Call from board init only */ +extern int omap_request_gpio(int gpio); +extern void omap_free_gpio(int gpio); +extern void omap_set_gpio_direction(int gpio, int is_input); +extern void omap_set_gpio_dataout(int gpio, int enable); +extern int omap_get_gpio_datain(int gpio); +extern void omap_set_gpio_debounce(int gpio, int enable); +extern void omap_set_gpio_debounce_time(int gpio, int enable); + +/*-------------------------------------------------------------------------*/ + +/* Wrappers for "new style" GPIO calls, using the new infrastructure + * which lets us plug in FPGA, I2C, and other implementations. + * * + * The original OMAP-specfic calls should eventually be removed. + */ + +#include <linux/errno.h> +#include <asm-generic/gpio.h> + +static inline int gpio_get_value(unsigned gpio) +{ + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + __gpio_set_value(gpio, value); +} + +static inline int gpio_cansleep(unsigned gpio) +{ + return __gpio_cansleep(gpio); +} + +static inline int gpio_to_irq(unsigned gpio) +{ + if (gpio < (OMAP_MAX_GPIO_LINES + 16)) + return OMAP_GPIO_IRQ(gpio); + return -EINVAL; +} + +static inline int irq_to_gpio(unsigned irq) +{ + if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16))) + return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES; + return irq - IH_GPIO_BASE; +} + +#endif diff --git a/arch/arm/plat-omap/include/mach/gpioexpander.h b/arch/arm/plat-omap/include/mach/gpioexpander.h new file mode 100644 index 000000000000..90444a0d6b1a --- /dev/null +++ b/arch/arm/plat-omap/include/mach/gpioexpander.h @@ -0,0 +1,35 @@ +/* + * arch/arm/plat-omap/include/mach/gpioexpander.h + * + * + * Copyright (C) 2004 Texas Instruments, Inc. + * + * This package is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. + */ + +#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H +#define __ASM_ARCH_OMAP_GPIOEXPANDER_H + +/* Function Prototypes for GPIO Expander functions */ + +#ifdef CONFIG_GPIOEXPANDER_OMAP +int read_gpio_expa(u8 *, int); +int write_gpio_expa(u8 , int); +#else +static inline int read_gpio_expa(u8 *val, int addr) +{ + return 0; +} +static inline int write_gpio_expa(u8 val, int addr) +{ + return 0; +} +#endif + +#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */ diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h new file mode 100644 index 000000000000..6a8e07ffc2d0 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/gpmc.h @@ -0,0 +1,96 @@ +/* + * General-Purpose Memory Controller for OMAP2 + * + * Copyright (C) 2005-2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __OMAP2_GPMC_H +#define __OMAP2_GPMC_H + +#define GPMC_CS_CONFIG1 0x00 +#define GPMC_CS_CONFIG2 0x04 +#define GPMC_CS_CONFIG3 0x08 +#define GPMC_CS_CONFIG4 0x0c +#define GPMC_CS_CONFIG5 0x10 +#define GPMC_CS_CONFIG6 0x14 +#define GPMC_CS_CONFIG7 0x18 +#define GPMC_CS_NAND_COMMAND 0x1c +#define GPMC_CS_NAND_ADDRESS 0x20 +#define GPMC_CS_NAND_DATA 0x24 + +#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31) +#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30) +#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29) +#define GPMC_CONFIG1_READTYPE_SYNC (1 << 29) +#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28) +#define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27) +#define GPMC_CONFIG1_WRITETYPE_SYNC (1 << 27) +#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25) +#define GPMC_CONFIG1_PAGE_LEN(val) ((val & 3) << 23) +#define GPMC_CONFIG1_WAIT_READ_MON (1 << 22) +#define GPMC_CONFIG1_WAIT_WRITE_MON (1 << 21) +#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18) +#define GPMC_CONFIG1_WAIT_PIN_SEL(val) ((val & 3) << 16) +#define GPMC_CONFIG1_DEVICESIZE(val) ((val & 3) << 12) +#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) +#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) +#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) +#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(1) +#define GPMC_CONFIG1_MUXADDDATA (1 << 9) +#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) +#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) +#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1)) +#define GPMC_CONFIG1_FCLK_DIV3 (GPMC_CONFIG1_FCLK_DIV(2)) +#define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3)) + +/* + * Note that all values in this struct are in nanoseconds, while + * the register values are in gpmc_fck cycles. + */ +struct gpmc_timings { + /* Minimum clock period for synchronous mode */ + u16 sync_clk; + + /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */ + u16 cs_on; /* Assertion time */ + u16 cs_rd_off; /* Read deassertion time */ + u16 cs_wr_off; /* Write deassertion time */ + + /* ADV signal timings corresponding to GPMC_CONFIG3 */ + u16 adv_on; /* Assertion time */ + u16 adv_rd_off; /* Read deassertion time */ + u16 adv_wr_off; /* Write deassertion time */ + + /* WE signals timings corresponding to GPMC_CONFIG4 */ + u16 we_on; /* WE assertion time */ + u16 we_off; /* WE deassertion time */ + + /* OE signals timings corresponding to GPMC_CONFIG4 */ + u16 oe_on; /* OE assertion time */ + u16 oe_off; /* OE deassertion time */ + + /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */ + u16 page_burst_access; /* Multiple access word delay */ + u16 access; /* Start-cycle to first data valid delay */ + u16 rd_cycle; /* Total read cycle time */ + u16 wr_cycle; /* Total write cycle time */ +}; + +extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); +extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns); +extern unsigned long gpmc_get_fclk_period(void); + +extern void gpmc_cs_write_reg(int cs, int idx, u32 val); +extern u32 gpmc_cs_read_reg(int cs, int idx); +extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk); +extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); +extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); +extern void gpmc_cs_free(int cs); +extern int gpmc_cs_set_reserved(int cs, int reserved); +extern int gpmc_cs_reserved(int cs); + +#endif diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h new file mode 100644 index 000000000000..07f5d7f21528 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/hardware.h @@ -0,0 +1,355 @@ +/* + * arch/arm/plat-omap/include/mach/hardware.h + * + * Hardware definitions for TI OMAP processors and boards + * + * NOTE: Please put device driver specific defines into a separate header + * file for each driver. + * + * Copyright (C) 2001 RidgeRun, Inc. + * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> + * + * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com> + * and Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP_HARDWARE_H +#define __ASM_ARCH_OMAP_HARDWARE_H + +#include <asm/sizes.h> +#ifndef __ASSEMBLER__ +#include <asm/types.h> +#include <mach/cpu.h> +#endif +#include <mach/serial.h> + +/* + * --------------------------------------------------------------------------- + * Common definitions for all OMAP processors + * NOTE: Put all processor or board specific parts to the special header + * files. + * --------------------------------------------------------------------------- + */ + +/* + * ---------------------------------------------------------------------------- + * Timers + * ---------------------------------------------------------------------------- + */ +#define OMAP_MPU_TIMER1_BASE (0xfffec500) +#define OMAP_MPU_TIMER2_BASE (0xfffec600) +#define OMAP_MPU_TIMER3_BASE (0xfffec700) +#define MPU_TIMER_FREE (1 << 6) +#define MPU_TIMER_CLOCK_ENABLE (1 << 5) +#define MPU_TIMER_AR (1 << 1) +#define MPU_TIMER_ST (1 << 0) + +/* + * ---------------------------------------------------------------------------- + * Clocks + * ---------------------------------------------------------------------------- + */ +#define CLKGEN_REG_BASE (0xfffece00) +#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) +#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) +#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) +#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) +#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) +#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) +#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) +#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) + +#define CK_RATEF 1 +#define CK_IDLEF 2 +#define CK_ENABLEF 4 +#define CK_SELECTF 8 +#define SETARM_IDLE_SHIFT + +/* DPLL control registers */ +#define DPLL_CTL (0xfffecf00) + +/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ +#define DSP_CONFIG_REG_BASE (0xe1008000) +#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) +#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) +#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) +#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) + +/* + * --------------------------------------------------------------------------- + * UPLD + * --------------------------------------------------------------------------- + */ +#define ULPD_REG_BASE (0xfffe0800) +#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) +#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) +#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) +# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ +# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ +#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) +# define SOFT_UDC_REQ (1 << 4) +# define SOFT_USB_CLK_REQ (1 << 3) +# define SOFT_DPLL_REQ (1 << 0) +#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) +#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) +#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) +#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) +#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) +# define DIS_MMC2_DPLL_REQ (1 << 11) +# define DIS_MMC1_DPLL_REQ (1 << 10) +# define DIS_UART3_DPLL_REQ (1 << 9) +# define DIS_UART2_DPLL_REQ (1 << 8) +# define DIS_UART1_DPLL_REQ (1 << 7) +# define DIS_USB_HOST_DPLL_REQ (1 << 6) +#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) +#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) + +/* + * --------------------------------------------------------------------------- + * Watchdog timer + * --------------------------------------------------------------------------- + */ + +/* Watchdog timer within the OMAP3.2 gigacell */ +#define OMAP_MPU_WATCHDOG_BASE (0xfffec800) +#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0) +#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) +#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) +#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8) + +/* + * --------------------------------------------------------------------------- + * Interrupts + * --------------------------------------------------------------------------- + */ +#ifdef CONFIG_ARCH_OMAP1 + +/* + * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c + * or something similar.. -- PFM. + */ + +#define OMAP_IH1_BASE 0xfffecb00 +#define OMAP_IH2_BASE 0xfffe0000 + +#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00) +#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04) +#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10) +#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14) +#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18) +#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c) +#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c) + +#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00) +#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04) +#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10) +#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14) +#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18) +#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c) +#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c) + +#define IRQ_ITR_REG_OFFSET 0x00 +#define IRQ_MIR_REG_OFFSET 0x04 +#define IRQ_SIR_IRQ_REG_OFFSET 0x10 +#define IRQ_SIR_FIQ_REG_OFFSET 0x14 +#define IRQ_CONTROL_REG_OFFSET 0x18 +#define IRQ_ISR_REG_OFFSET 0x9c +#define IRQ_ILR0_REG_OFFSET 0x1c +#define IRQ_GMR_REG_OFFSET 0xa0 + +#endif + +/* + * ---------------------------------------------------------------------------- + * System control registers + * ---------------------------------------------------------------------------- + */ +#define MOD_CONF_CTRL_0 0xfffe1080 +#define MOD_CONF_CTRL_1 0xfffe1110 + +/* + * ---------------------------------------------------------------------------- + * Pin multiplexing registers + * ---------------------------------------------------------------------------- + */ +#define FUNC_MUX_CTRL_0 0xfffe1000 +#define FUNC_MUX_CTRL_1 0xfffe1004 +#define FUNC_MUX_CTRL_2 0xfffe1008 +#define COMP_MODE_CTRL_0 0xfffe100c +#define FUNC_MUX_CTRL_3 0xfffe1010 +#define FUNC_MUX_CTRL_4 0xfffe1014 +#define FUNC_MUX_CTRL_5 0xfffe1018 +#define FUNC_MUX_CTRL_6 0xfffe101C +#define FUNC_MUX_CTRL_7 0xfffe1020 +#define FUNC_MUX_CTRL_8 0xfffe1024 +#define FUNC_MUX_CTRL_9 0xfffe1028 +#define FUNC_MUX_CTRL_A 0xfffe102C +#define FUNC_MUX_CTRL_B 0xfffe1030 +#define FUNC_MUX_CTRL_C 0xfffe1034 +#define FUNC_MUX_CTRL_D 0xfffe1038 +#define PULL_DWN_CTRL_0 0xfffe1040 +#define PULL_DWN_CTRL_1 0xfffe1044 +#define PULL_DWN_CTRL_2 0xfffe1048 +#define PULL_DWN_CTRL_3 0xfffe104c +#define PULL_DWN_CTRL_4 0xfffe10ac + +/* OMAP-1610 specific multiplexing registers */ +#define FUNC_MUX_CTRL_E 0xfffe1090 +#define FUNC_MUX_CTRL_F 0xfffe1094 +#define FUNC_MUX_CTRL_10 0xfffe1098 +#define FUNC_MUX_CTRL_11 0xfffe109c +#define FUNC_MUX_CTRL_12 0xfffe10a0 +#define PU_PD_SEL_0 0xfffe10b4 +#define PU_PD_SEL_1 0xfffe10b8 +#define PU_PD_SEL_2 0xfffe10bc +#define PU_PD_SEL_3 0xfffe10c0 +#define PU_PD_SEL_4 0xfffe10c4 + +/* Timer32K for 1610 and 1710*/ +#define OMAP_TIMER32K_BASE 0xFFFBC400 + +/* + * --------------------------------------------------------------------------- + * TIPB bus interface + * --------------------------------------------------------------------------- + */ +#define TIPB_PUBLIC_CNTL_BASE 0xfffed300 +#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8) +#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00 +#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8) + +/* + * ---------------------------------------------------------------------------- + * MPUI interface + * ---------------------------------------------------------------------------- + */ +#define MPUI_BASE (0xfffec900) +#define MPUI_CTRL (MPUI_BASE + 0x0) +#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4) +#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8) +#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc) +#define MPUI_STATUS_REG (MPUI_BASE + 0x10) +#define MPUI_DSP_STATUS (MPUI_BASE + 0x14) +#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18) +#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c) + +/* + * ---------------------------------------------------------------------------- + * LED Pulse Generator + * ---------------------------------------------------------------------------- + */ +#define OMAP_LPG1_BASE 0xfffbd000 +#define OMAP_LPG2_BASE 0xfffbd800 +#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00) +#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04) +#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00) +#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) + +/* + * ---------------------------------------------------------------------------- + * Pulse-Width Light + * ---------------------------------------------------------------------------- + */ +#define OMAP_PWL_BASE 0xfffb5800 +#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00) +#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04) + +/* + * --------------------------------------------------------------------------- + * Processor specific defines + * --------------------------------------------------------------------------- + */ + +#include "omap730.h" +#include "omap1510.h" +#include "omap24xx.h" +#include "omap16xx.h" +#include "omap34xx.h" + +#ifndef __ASSEMBLER__ + +/* + * --------------------------------------------------------------------------- + * Board specific defines + * --------------------------------------------------------------------------- + */ + +#ifdef CONFIG_MACH_OMAP_INNOVATOR +#include "board-innovator.h" +#endif + +#ifdef CONFIG_MACH_OMAP_H2 +#include "board-h2.h" +#endif + +#ifdef CONFIG_MACH_OMAP_PERSEUS2 +#include "board-perseus2.h" +#endif + +#ifdef CONFIG_MACH_OMAP_FSAMPLE +#include "board-fsample.h" +#endif + +#ifdef CONFIG_MACH_OMAP_H3 +#include "board-h3.h" +#endif + +#ifdef CONFIG_MACH_OMAP_H4 +#include "board-h4.h" +#endif + +#ifdef CONFIG_MACH_OMAP_2430SDP +#include "board-2430sdp.h" +#endif + +#ifdef CONFIG_MACH_OMAP_APOLLON +#include "board-apollon.h" +#endif + +#ifdef CONFIG_MACH_OMAP_OSK +#include "board-osk.h" +#endif + +#ifdef CONFIG_MACH_VOICEBLUE +#include "board-voiceblue.h" +#endif + +#ifdef CONFIG_MACH_OMAP_PALMTE +#include "board-palmte.h" +#endif + +#ifdef CONFIG_MACH_OMAP_PALMZ71 +#include "board-palmz71.h" +#endif + +#ifdef CONFIG_MACH_OMAP_PALMTT +#include "board-palmtt.h" +#endif + +#ifdef CONFIG_MACH_SX1 +#include "board-sx1.h" +#endif + +#endif /* !__ASSEMBLER__ */ + +#endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/mach/hwa742.h new file mode 100644 index 000000000000..577f492f2d3c --- /dev/null +++ b/arch/arm/plat-omap/include/mach/hwa742.h @@ -0,0 +1,12 @@ +#ifndef _HWA742_H +#define _HWA742_H + +struct hwa742_platform_data { + void (*power_up)(struct device *dev); + void (*power_down)(struct device *dev); + unsigned long (*get_clock_rate)(struct device *dev); + + unsigned te_connected:1; +}; + +#endif diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h new file mode 100644 index 000000000000..2a30b7d88cde --- /dev/null +++ b/arch/arm/plat-omap/include/mach/io.h @@ -0,0 +1,197 @@ +/* + * arch/arm/plat-omap/include/mach/io.h + * + * IO definitions for TI OMAP processors and boards + * + * Copied from arch/arm/mach-sa1100/include/mach/io.h + * Copyright (C) 1997-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Modifications: + * 06-12-1997 RMK Created. + * 07-04-1999 RMK Major cleanup + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#include <mach/hardware.h> + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) ((void __iomem *)(PCIO_BASE + (a))) +#define __mem_pci(a) (a) + +/* + * ---------------------------------------------------------------------------- + * I/O mapping + * ---------------------------------------------------------------------------- + */ + +#define PCIO_BASE 0 + +#if defined(CONFIG_ARCH_OMAP1) + +#define IO_PHYS 0xFFFB0000 +#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ +#define IO_SIZE 0x40000 +#define IO_VIRT (IO_PHYS - IO_OFFSET) +#define IO_ADDRESS(pa) ((pa) - IO_OFFSET) +#define OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET) +#define io_p2v(pa) ((pa) - IO_OFFSET) +#define io_v2p(va) ((va) + IO_OFFSET) + +#elif defined(CONFIG_ARCH_OMAP2) + +/* We map both L3 and L4 on OMAP2 */ +#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 */ +#define L3_24XX_VIRT 0xf8000000 +#define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ +#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 */ +#define L4_24XX_VIRT 0xd8000000 +#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */ + +#ifdef CONFIG_ARCH_OMAP2430 +#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */ +#define L4_WK_243X_VIRT 0xd9000000 +#define L4_WK_243X_SIZE SZ_1M +#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE /* 0x49000000 */ +#define OMAP243X_GPMC_VIRT 0xFE000000 +#define OMAP243X_GPMC_SIZE SZ_1M +#define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE +#define OMAP243X_SDRC_VIRT 0xFD000000 +#define OMAP243X_SDRC_SIZE SZ_1M +#define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE +#define OMAP243X_SMS_VIRT 0xFC000000 +#define OMAP243X_SMS_SIZE SZ_1M + +#endif + +#define IO_OFFSET 0x90000000 +#define IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ +#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ +#define io_p2v(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ +#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */ + +/* DSP */ +#define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */ +#define DSP_MEM_24XX_VIRT 0xe0000000 +#define DSP_MEM_24XX_SIZE 0x28000 +#define DSP_IPI_24XX_PHYS OMAP2420_DSP_IPI_BASE /* 0x59000000 */ +#define DSP_IPI_24XX_VIRT 0xe1000000 +#define DSP_IPI_24XX_SIZE SZ_4K +#define DSP_MMU_24XX_PHYS OMAP2420_DSP_MMU_BASE /* 0x5a000000 */ +#define DSP_MMU_24XX_VIRT 0xe2000000 +#define DSP_MMU_24XX_SIZE SZ_4K + +#elif defined(CONFIG_ARCH_OMAP3) + +/* We map both L3 and L4 on OMAP3 */ +#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 */ +#define L3_34XX_VIRT 0xf8000000 +#define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ + +#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 */ +#define L4_34XX_VIRT 0xd8000000 +#define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */ + +/* + * Need to look at the Size 4M for L4. + * VPOM3430 was not working for Int controller + */ + +#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 */ +#define L4_WK_34XX_VIRT 0xd8300000 +#define L4_WK_34XX_SIZE SZ_1M + +#define L4_PER_34XX_PHYS L4_PER_34XX_BASE /* 0x49000000 */ +#define L4_PER_34XX_VIRT 0xd9000000 +#define L4_PER_34XX_SIZE SZ_1M + +#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE /* 0x54000000 */ +#define L4_EMU_34XX_VIRT 0xe4000000 +#define L4_EMU_34XX_SIZE SZ_64M + +#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE /* 0x6E000000 */ +#define OMAP34XX_GPMC_VIRT 0xFE000000 +#define OMAP34XX_GPMC_SIZE SZ_1M + +#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE /* 0x6C000000 */ +#define OMAP343X_SMS_VIRT 0xFC000000 +#define OMAP343X_SMS_SIZE SZ_1M + +#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE /* 0x6D000000 */ +#define OMAP343X_SDRC_VIRT 0xFD000000 +#define OMAP343X_SDRC_SIZE SZ_1M + + +#define IO_OFFSET 0x90000000 +#define IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ +#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ +#define io_p2v(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ +#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */ + +/* DSP */ +#define DSP_MEM_34XX_PHYS OMAP34XX_DSP_MEM_BASE /* 0x58000000 */ +#define DSP_MEM_34XX_VIRT 0xe0000000 +#define DSP_MEM_34XX_SIZE 0x28000 +#define DSP_IPI_34XX_PHYS OMAP34XX_DSP_IPI_BASE /* 0x59000000 */ +#define DSP_IPI_34XX_VIRT 0xe1000000 +#define DSP_IPI_34XX_SIZE SZ_4K +#define DSP_MMU_34XX_PHYS OMAP34XX_DSP_MMU_BASE /* 0x5a000000 */ +#define DSP_MMU_34XX_VIRT 0xe2000000 +#define DSP_MMU_34XX_SIZE SZ_4K + +#endif + +#ifndef __ASSEMBLER__ + +/* + * Functions to access the OMAP IO region + * + * NOTE: - Use omap_read/write[bwl] for physical register addresses + * - Use __raw_read/write[bwl]() for virtual register addresses + * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses + * - DO NOT use hardcoded virtual addresses to allow changing the + * IO address space again if needed + */ +#define omap_readb(a) (*(volatile unsigned char *)IO_ADDRESS(a)) +#define omap_readw(a) (*(volatile unsigned short *)IO_ADDRESS(a)) +#define omap_readl(a) (*(volatile unsigned int *)IO_ADDRESS(a)) + +#define omap_writeb(v,a) (*(volatile unsigned char *)IO_ADDRESS(a) = (v)) +#define omap_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v)) +#define omap_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v)) + +extern void omap1_map_common_io(void); +extern void omap1_init_common_hw(void); + +extern void omap2_map_common_io(void); +extern void omap2_init_common_hw(void); + +#endif + +#endif diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/mach/irda.h new file mode 100644 index 000000000000..8372a00d8e0b --- /dev/null +++ b/arch/arm/plat-omap/include/mach/irda.h @@ -0,0 +1,37 @@ +/* + * arch/arm/plat-omap/include/mach/irda.h + * + * Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASMARM_ARCH_IRDA_H +#define ASMARM_ARCH_IRDA_H + +/* board specific transceiver capabilities */ + +#define IR_SEL 1 /* Selects IrDA */ +#define IR_SIRMODE 2 +#define IR_FIRMODE 4 +#define IR_MIRMODE 8 + +struct omap_irda_config { + int transceiver_cap; + int (*transceiver_mode)(struct device *dev, int mode); + int (*select_irda)(struct device *dev, int state); + /* Very specific to the needs of some platforms (h3,h4) + * having calls which can sleep in irda_set_speed. + */ + struct delayed_work gpio_expa; + int rx_channel; + int tx_channel; + unsigned long dest_start; + unsigned long src_start; + int tx_trigger; + int rx_trigger; + int mode; +}; + +#endif diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h new file mode 100644 index 000000000000..17248bbf3f27 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/irqs.h @@ -0,0 +1,332 @@ +/* + * arch/arm/plat-omap/include/mach/irqs.h + * + * Copyright (C) Greg Lonnon 2001 + * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610 + * are different. + */ + +#ifndef __ASM_ARCH_OMAP15XX_IRQS_H +#define __ASM_ARCH_OMAP15XX_IRQS_H + +/* + * IRQ numbers for interrupt handler 1 + * + * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below + * + */ +#define INT_CAMERA 1 +#define INT_FIQ 3 +#define INT_RTDX 6 +#define INT_DSP_MMU_ABORT 7 +#define INT_HOST 8 +#define INT_ABORT 9 +#define INT_BRIDGE_PRIV 13 +#define INT_GPIO_BANK1 14 +#define INT_UART3 15 +#define INT_TIMER3 16 +#define INT_DMA_CH0_6 19 +#define INT_DMA_CH1_7 20 +#define INT_DMA_CH2_8 21 +#define INT_DMA_CH3 22 +#define INT_DMA_CH4 23 +#define INT_DMA_CH5 24 +#define INT_DMA_LCD 25 +#define INT_TIMER1 26 +#define INT_WD_TIMER 27 +#define INT_BRIDGE_PUB 28 +#define INT_TIMER2 30 +#define INT_LCD_CTRL 31 + +/* + * OMAP-1510 specific IRQ numbers for interrupt handler 1 + */ +#define INT_1510_IH2_IRQ 0 +#define INT_1510_RES2 2 +#define INT_1510_SPI_TX 4 +#define INT_1510_SPI_RX 5 +#define INT_1510_DSP_MAILBOX1 10 +#define INT_1510_DSP_MAILBOX2 11 +#define INT_1510_RES12 12 +#define INT_1510_LB_MMU 17 +#define INT_1510_RES18 18 +#define INT_1510_LOCAL_BUS 29 + +/* + * OMAP-1610 specific IRQ numbers for interrupt handler 1 + */ +#define INT_1610_IH2_IRQ 0 +#define INT_1610_IH2_FIQ 2 +#define INT_1610_McBSP2_TX 4 +#define INT_1610_McBSP2_RX 5 +#define INT_1610_DSP_MAILBOX1 10 +#define INT_1610_DSP_MAILBOX2 11 +#define INT_1610_LCD_LINE 12 +#define INT_1610_GPTIMER1 17 +#define INT_1610_GPTIMER2 18 +#define INT_1610_SSR_FIFO_0 29 + +/* + * OMAP-730 specific IRQ numbers for interrupt handler 1 + */ +#define INT_730_IH2_FIQ 0 +#define INT_730_IH2_IRQ 1 +#define INT_730_USB_NON_ISO 2 +#define INT_730_USB_ISO 3 +#define INT_730_ICR 4 +#define INT_730_EAC 5 +#define INT_730_GPIO_BANK1 6 +#define INT_730_GPIO_BANK2 7 +#define INT_730_GPIO_BANK3 8 +#define INT_730_McBSP2TX 10 +#define INT_730_McBSP2RX 11 +#define INT_730_McBSP2RX_OVF 12 +#define INT_730_LCD_LINE 14 +#define INT_730_GSM_PROTECT 15 +#define INT_730_TIMER3 16 +#define INT_730_GPIO_BANK5 17 +#define INT_730_GPIO_BANK6 18 +#define INT_730_SPGIO_WR 29 + +/* + * IRQ numbers for interrupt handler 2 + * + * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below + */ +#define IH2_BASE 32 + +#define INT_KEYBOARD (1 + IH2_BASE) +#define INT_uWireTX (2 + IH2_BASE) +#define INT_uWireRX (3 + IH2_BASE) +#define INT_I2C (4 + IH2_BASE) +#define INT_MPUIO (5 + IH2_BASE) +#define INT_USB_HHC_1 (6 + IH2_BASE) +#define INT_McBSP3TX (10 + IH2_BASE) +#define INT_McBSP3RX (11 + IH2_BASE) +#define INT_McBSP1TX (12 + IH2_BASE) +#define INT_McBSP1RX (13 + IH2_BASE) +#define INT_UART1 (14 + IH2_BASE) +#define INT_UART2 (15 + IH2_BASE) +#define INT_BT_MCSI1TX (16 + IH2_BASE) +#define INT_BT_MCSI1RX (17 + IH2_BASE) +#define INT_USB_W2FC (20 + IH2_BASE) +#define INT_1WIRE (21 + IH2_BASE) +#define INT_OS_TIMER (22 + IH2_BASE) +#define INT_MMC (23 + IH2_BASE) +#define INT_GAUGE_32K (24 + IH2_BASE) +#define INT_RTC_TIMER (25 + IH2_BASE) +#define INT_RTC_ALARM (26 + IH2_BASE) +#define INT_MEM_STICK (27 + IH2_BASE) + +/* + * OMAP-1510 specific IRQ numbers for interrupt handler 2 + */ +#define INT_1510_DSP_MMU (28 + IH2_BASE) +#define INT_1510_COM_SPI_RO (31 + IH2_BASE) + +/* + * OMAP-1610 specific IRQ numbers for interrupt handler 2 + */ +#define INT_1610_FAC (0 + IH2_BASE) +#define INT_1610_USB_HHC_2 (7 + IH2_BASE) +#define INT_1610_USB_OTG (8 + IH2_BASE) +#define INT_1610_SoSSI (9 + IH2_BASE) +#define INT_1610_SoSSI_MATCH (19 + IH2_BASE) +#define INT_1610_DSP_MMU (28 + IH2_BASE) +#define INT_1610_McBSP2RX_OF (31 + IH2_BASE) +#define INT_1610_STI (32 + IH2_BASE) +#define INT_1610_STI_WAKEUP (33 + IH2_BASE) +#define INT_1610_GPTIMER3 (34 + IH2_BASE) +#define INT_1610_GPTIMER4 (35 + IH2_BASE) +#define INT_1610_GPTIMER5 (36 + IH2_BASE) +#define INT_1610_GPTIMER6 (37 + IH2_BASE) +#define INT_1610_GPTIMER7 (38 + IH2_BASE) +#define INT_1610_GPTIMER8 (39 + IH2_BASE) +#define INT_1610_GPIO_BANK2 (40 + IH2_BASE) +#define INT_1610_GPIO_BANK3 (41 + IH2_BASE) +#define INT_1610_MMC2 (42 + IH2_BASE) +#define INT_1610_CF (43 + IH2_BASE) +#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE) +#define INT_1610_GPIO_BANK4 (48 + IH2_BASE) +#define INT_1610_SPI (49 + IH2_BASE) +#define INT_1610_DMA_CH6 (53 + IH2_BASE) +#define INT_1610_DMA_CH7 (54 + IH2_BASE) +#define INT_1610_DMA_CH8 (55 + IH2_BASE) +#define INT_1610_DMA_CH9 (56 + IH2_BASE) +#define INT_1610_DMA_CH10 (57 + IH2_BASE) +#define INT_1610_DMA_CH11 (58 + IH2_BASE) +#define INT_1610_DMA_CH12 (59 + IH2_BASE) +#define INT_1610_DMA_CH13 (60 + IH2_BASE) +#define INT_1610_DMA_CH14 (61 + IH2_BASE) +#define INT_1610_DMA_CH15 (62 + IH2_BASE) +#define INT_1610_NAND (63 + IH2_BASE) + +/* + * OMAP-730 specific IRQ numbers for interrupt handler 2 + */ +#define INT_730_HW_ERRORS (0 + IH2_BASE) +#define INT_730_NFIQ_PWR_FAIL (1 + IH2_BASE) +#define INT_730_CFCD (2 + IH2_BASE) +#define INT_730_CFIREQ (3 + IH2_BASE) +#define INT_730_I2C (4 + IH2_BASE) +#define INT_730_PCC (5 + IH2_BASE) +#define INT_730_MPU_EXT_NIRQ (6 + IH2_BASE) +#define INT_730_SPI_100K_1 (7 + IH2_BASE) +#define INT_730_SYREN_SPI (8 + IH2_BASE) +#define INT_730_VLYNQ (9 + IH2_BASE) +#define INT_730_GPIO_BANK4 (10 + IH2_BASE) +#define INT_730_McBSP1TX (11 + IH2_BASE) +#define INT_730_McBSP1RX (12 + IH2_BASE) +#define INT_730_McBSP1RX_OF (13 + IH2_BASE) +#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE) +#define INT_730_UART_MODEM_1 (15 + IH2_BASE) +#define INT_730_MCSI (16 + IH2_BASE) +#define INT_730_uWireTX (17 + IH2_BASE) +#define INT_730_uWireRX (18 + IH2_BASE) +#define INT_730_SMC_CD (19 + IH2_BASE) +#define INT_730_SMC_IREQ (20 + IH2_BASE) +#define INT_730_HDQ_1WIRE (21 + IH2_BASE) +#define INT_730_TIMER32K (22 + IH2_BASE) +#define INT_730_MMC_SDIO (23 + IH2_BASE) +#define INT_730_UPLD (24 + IH2_BASE) +#define INT_730_USB_HHC_1 (27 + IH2_BASE) +#define INT_730_USB_HHC_2 (28 + IH2_BASE) +#define INT_730_USB_GENI (29 + IH2_BASE) +#define INT_730_USB_OTG (30 + IH2_BASE) +#define INT_730_CAMERA_IF (31 + IH2_BASE) +#define INT_730_RNG (32 + IH2_BASE) +#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE) +#define INT_730_DBB_RF_EN (34 + IH2_BASE) +#define INT_730_MPUIO_KEYPAD (35 + IH2_BASE) +#define INT_730_SHA1_MD5 (36 + IH2_BASE) +#define INT_730_SPI_100K_2 (37 + IH2_BASE) +#define INT_730_RNG_IDLE (38 + IH2_BASE) +#define INT_730_MPUIO (39 + IH2_BASE) +#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) +#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE) +#define INT_730_LLPC_OE_RISING (42 + IH2_BASE) +#define INT_730_LLPC_VSYNC (43 + IH2_BASE) +#define INT_730_WAKE_UP_REQ (46 + IH2_BASE) +#define INT_730_DMA_CH6 (53 + IH2_BASE) +#define INT_730_DMA_CH7 (54 + IH2_BASE) +#define INT_730_DMA_CH8 (55 + IH2_BASE) +#define INT_730_DMA_CH9 (56 + IH2_BASE) +#define INT_730_DMA_CH10 (57 + IH2_BASE) +#define INT_730_DMA_CH11 (58 + IH2_BASE) +#define INT_730_DMA_CH12 (59 + IH2_BASE) +#define INT_730_DMA_CH13 (60 + IH2_BASE) +#define INT_730_DMA_CH14 (61 + IH2_BASE) +#define INT_730_DMA_CH15 (62 + IH2_BASE) +#define INT_730_NAND (63 + IH2_BASE) + +#define INT_24XX_SYS_NIRQ 7 +#define INT_24XX_SDMA_IRQ0 12 +#define INT_24XX_SDMA_IRQ1 13 +#define INT_24XX_SDMA_IRQ2 14 +#define INT_24XX_SDMA_IRQ3 15 +#define INT_24XX_CAM_IRQ 24 +#define INT_24XX_DSS_IRQ 25 +#define INT_24XX_MAIL_U0_MPU 26 +#define INT_24XX_DSP_UMA 27 +#define INT_24XX_DSP_MMU 28 +#define INT_24XX_GPIO_BANK1 29 +#define INT_24XX_GPIO_BANK2 30 +#define INT_24XX_GPIO_BANK3 31 +#define INT_24XX_GPIO_BANK4 32 +#define INT_24XX_GPIO_BANK5 33 +#define INT_24XX_MAIL_U3_MPU 34 +#define INT_24XX_GPTIMER1 37 +#define INT_24XX_GPTIMER2 38 +#define INT_24XX_GPTIMER3 39 +#define INT_24XX_GPTIMER4 40 +#define INT_24XX_GPTIMER5 41 +#define INT_24XX_GPTIMER6 42 +#define INT_24XX_GPTIMER7 43 +#define INT_24XX_GPTIMER8 44 +#define INT_24XX_GPTIMER9 45 +#define INT_24XX_GPTIMER10 46 +#define INT_24XX_GPTIMER11 47 +#define INT_24XX_GPTIMER12 48 +#define INT_24XX_I2C1_IRQ 56 +#define INT_24XX_I2C2_IRQ 57 +#define INT_24XX_MCBSP1_IRQ_TX 59 +#define INT_24XX_MCBSP1_IRQ_RX 60 +#define INT_24XX_MCBSP2_IRQ_TX 62 +#define INT_24XX_MCBSP2_IRQ_RX 63 +#define INT_24XX_UART1_IRQ 72 +#define INT_24XX_UART2_IRQ 73 +#define INT_24XX_UART3_IRQ 74 +#define INT_24XX_USB_IRQ_GEN 75 +#define INT_24XX_USB_IRQ_NISO 76 +#define INT_24XX_USB_IRQ_ISO 77 +#define INT_24XX_USB_IRQ_HGEN 78 +#define INT_24XX_USB_IRQ_HSOF 79 +#define INT_24XX_USB_IRQ_OTG 80 +#define INT_24XX_MMC_IRQ 83 + +/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and + * 16 MPUIO lines */ +#define OMAP_MAX_GPIO_LINES 192 +#define IH_GPIO_BASE (128 + IH2_BASE) +#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) +#define OMAP_IRQ_END (IH_MPUIO_BASE + 16) + +/* External FPGA handles interrupts on Innovator boards */ +#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END) +#ifdef CONFIG_MACH_OMAP_INNOVATOR +#define OMAP_FPGA_NR_IRQS 24 +#else +#define OMAP_FPGA_NR_IRQS 0 +#endif +#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS) + +/* External TWL4030 can handle interrupts on 2430 and 34xx boards */ +#define TWL4030_IRQ_BASE (OMAP_FPGA_IRQ_END) +#ifdef CONFIG_TWL4030_CORE +#define TWL4030_BASE_NR_IRQS 8 +#define TWL4030_PWR_NR_IRQS 8 +#else +#define TWL4030_BASE_NR_IRQS 0 +#define TWL4030_PWR_NR_IRQS 0 +#endif +#define TWL4030_IRQ_END (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS) +#define TWL4030_PWR_IRQ_BASE TWL4030_IRQ_END +#define TWL4030_PWR_IRQ_END (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS) + +/* External TWL4030 gpio interrupts are optional */ +#define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END +#ifdef CONFIG_TWL4030_GPIO +#define TWL4030_GPIO_NR_IRQS 18 +#else +#define TWL4030_GPIO_NR_IRQS 0 +#endif +#define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS) + +/* Total number of interrupts depends on the enabled blocks above */ +#define NR_IRQS TWL4030_GPIO_IRQ_END + +#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) + +#ifndef __ASSEMBLY__ +extern void omap_init_irq(void); +#endif + +#include <mach/hardware.h> + +#endif diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h new file mode 100644 index 000000000000..232923aaf61d --- /dev/null +++ b/arch/arm/plat-omap/include/mach/keypad.h @@ -0,0 +1,39 @@ +/* + * arch/arm/plat-omap/include/mach/keypad.h + * + * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASMARM_ARCH_KEYPAD_H +#define ASMARM_ARCH_KEYPAD_H + +struct omap_kp_platform_data { + int rows; + int cols; + int *keymap; + unsigned int keymapsize; + unsigned int rep:1; + unsigned long delay; + unsigned int dbounce:1; + /* specific to OMAP242x*/ + unsigned int *row_gpios; + unsigned int *col_gpios; +}; + +/* Group (0..3) -- when multiple keys are pressed, only the + * keys pressed in the same group are considered as pressed. This is + * in order to workaround certain crappy HW designs that produce ghost + * keypresses. */ +#define GROUP_0 (0 << 16) +#define GROUP_1 (1 << 16) +#define GROUP_2 (2 << 16) +#define GROUP_3 (3 << 16) +#define GROUP_MASK GROUP_3 + +#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val)) + +#endif + diff --git a/arch/arm/plat-omap/include/mach/lcd_mipid.h b/arch/arm/plat-omap/include/mach/lcd_mipid.h new file mode 100644 index 000000000000..f8fbc4801e52 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/lcd_mipid.h @@ -0,0 +1,24 @@ +#ifndef __LCD_MIPID_H +#define __LCD_MIPID_H + +enum mipid_test_num { + MIPID_TEST_RGB_LINES, +}; + +enum mipid_test_result { + MIPID_TEST_SUCCESS, + MIPID_TEST_INVALID, + MIPID_TEST_FAILED, +}; + +#ifdef __KERNEL__ + +struct mipid_platform_data { + int nreset_gpio; + int data_lines; + void (*shutdown)(struct mipid_platform_data *pdata); +}; + +#endif + +#endif diff --git a/arch/arm/plat-omap/include/mach/led.h b/arch/arm/plat-omap/include/mach/led.h new file mode 100644 index 000000000000..25e451e7e2fd --- /dev/null +++ b/arch/arm/plat-omap/include/mach/led.h @@ -0,0 +1,24 @@ +/* + * arch/arm/plat-omap/include/mach/led.h + * + * Copyright (C) 2006 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASMARM_ARCH_LED_H +#define ASMARM_ARCH_LED_H + +struct omap_led_config { + struct led_classdev cdev; + s16 gpio; +}; + +struct omap_led_platform_data { + s16 nr_leds; + struct omap_led_config *leds; +}; + +#endif diff --git a/arch/arm/plat-omap/include/mach/mailbox.h b/arch/arm/plat-omap/include/mach/mailbox.h new file mode 100644 index 000000000000..7cbed9332e16 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/mailbox.h @@ -0,0 +1,73 @@ +/* mailbox.h */ + +#ifndef MAILBOX_H +#define MAILBOX_H + +#include <linux/wait.h> +#include <linux/workqueue.h> +#include <linux/blkdev.h> + +typedef u32 mbox_msg_t; +typedef void (mbox_receiver_t)(mbox_msg_t msg); +struct omap_mbox; + +typedef int __bitwise omap_mbox_irq_t; +#define IRQ_TX ((__force omap_mbox_irq_t) 1) +#define IRQ_RX ((__force omap_mbox_irq_t) 2) + +typedef int __bitwise omap_mbox_type_t; +#define OMAP_MBOX_TYPE1 ((__force omap_mbox_type_t) 1) +#define OMAP_MBOX_TYPE2 ((__force omap_mbox_type_t) 2) + +struct omap_mbox_ops { + omap_mbox_type_t type; + int (*startup)(struct omap_mbox *mbox); + void (*shutdown)(struct omap_mbox *mbox); + /* fifo */ + mbox_msg_t (*fifo_read)(struct omap_mbox *mbox); + void (*fifo_write)(struct omap_mbox *mbox, mbox_msg_t msg); + int (*fifo_empty)(struct omap_mbox *mbox); + int (*fifo_full)(struct omap_mbox *mbox); + /* irq */ + void (*enable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); + void (*disable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); + void (*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); + int (*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); +}; + +struct omap_mbox_queue { + spinlock_t lock; + struct request_queue *queue; + struct work_struct work; + int (*callback)(void *); + struct omap_mbox *mbox; +}; + +struct omap_mbox { + char *name; + unsigned int irq; + + struct omap_mbox_queue *txq, *rxq; + + struct omap_mbox_ops *ops; + + mbox_msg_t seq_snd, seq_rcv; + + struct device dev; + + struct omap_mbox *next; + void *priv; + + void (*err_notify)(void); +}; + +int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg, void *); +void omap_mbox_init_seq(struct omap_mbox *); + +struct omap_mbox *omap_mbox_get(const char *); +void omap_mbox_put(struct omap_mbox *); + +int omap_mbox_register(struct omap_mbox *); +int omap_mbox_unregister(struct omap_mbox *); + +#endif /* MAILBOX_H */ diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h new file mode 100644 index 000000000000..6eb44a92871d --- /dev/null +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -0,0 +1,380 @@ +/* + * arch/arm/plat-omap/include/mach/mcbsp.h + * + * Defines for Multi-Channel Buffered Serial Port + * + * Copyright (C) 2002 RidgeRun, Inc. + * Author: Steve Johnson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __ASM_ARCH_OMAP_MCBSP_H +#define __ASM_ARCH_OMAP_MCBSP_H + +#include <linux/completion.h> +#include <linux/spinlock.h> + +#include <mach/hardware.h> +#include <mach/clock.h> + +#define OMAP730_MCBSP1_BASE 0xfffb1000 +#define OMAP730_MCBSP2_BASE 0xfffb1800 + +#define OMAP1510_MCBSP1_BASE 0xe1011800 +#define OMAP1510_MCBSP2_BASE 0xfffb1000 +#define OMAP1510_MCBSP3_BASE 0xe1017000 + +#define OMAP1610_MCBSP1_BASE 0xe1011800 +#define OMAP1610_MCBSP2_BASE 0xfffb1000 +#define OMAP1610_MCBSP3_BASE 0xe1017000 + +#define OMAP24XX_MCBSP1_BASE 0x48074000 +#define OMAP24XX_MCBSP2_BASE 0x48076000 + +#define OMAP34XX_MCBSP1_BASE 0x48074000 +#define OMAP34XX_MCBSP2_BASE 0x49022000 + +#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) + +#define OMAP_MCBSP_REG_DRR2 0x00 +#define OMAP_MCBSP_REG_DRR1 0x02 +#define OMAP_MCBSP_REG_DXR2 0x04 +#define OMAP_MCBSP_REG_DXR1 0x06 +#define OMAP_MCBSP_REG_SPCR2 0x08 +#define OMAP_MCBSP_REG_SPCR1 0x0a +#define OMAP_MCBSP_REG_RCR2 0x0c +#define OMAP_MCBSP_REG_RCR1 0x0e +#define OMAP_MCBSP_REG_XCR2 0x10 +#define OMAP_MCBSP_REG_XCR1 0x12 +#define OMAP_MCBSP_REG_SRGR2 0x14 +#define OMAP_MCBSP_REG_SRGR1 0x16 +#define OMAP_MCBSP_REG_MCR2 0x18 +#define OMAP_MCBSP_REG_MCR1 0x1a +#define OMAP_MCBSP_REG_RCERA 0x1c +#define OMAP_MCBSP_REG_RCERB 0x1e +#define OMAP_MCBSP_REG_XCERA 0x20 +#define OMAP_MCBSP_REG_XCERB 0x22 +#define OMAP_MCBSP_REG_PCR0 0x24 +#define OMAP_MCBSP_REG_RCERC 0x26 +#define OMAP_MCBSP_REG_RCERD 0x28 +#define OMAP_MCBSP_REG_XCERC 0x2A +#define OMAP_MCBSP_REG_XCERD 0x2C +#define OMAP_MCBSP_REG_RCERE 0x2E +#define OMAP_MCBSP_REG_RCERF 0x30 +#define OMAP_MCBSP_REG_XCERE 0x32 +#define OMAP_MCBSP_REG_XCERF 0x34 +#define OMAP_MCBSP_REG_RCERG 0x36 +#define OMAP_MCBSP_REG_RCERH 0x38 +#define OMAP_MCBSP_REG_XCERG 0x3A +#define OMAP_MCBSP_REG_XCERH 0x3C + +#define OMAP_MAX_MCBSP_COUNT 3 +#define MAX_MCBSP_CLOCKS 3 + +#define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1) +#define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1) + +#define AUDIO_MCBSP OMAP_MCBSP1 +#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX +#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX + +#elif defined(CONFIG_ARCH_OMAP24XX) + +#define OMAP_MCBSP_REG_DRR2 0x00 +#define OMAP_MCBSP_REG_DRR1 0x04 +#define OMAP_MCBSP_REG_DXR2 0x08 +#define OMAP_MCBSP_REG_DXR1 0x0C +#define OMAP_MCBSP_REG_SPCR2 0x10 +#define OMAP_MCBSP_REG_SPCR1 0x14 +#define OMAP_MCBSP_REG_RCR2 0x18 +#define OMAP_MCBSP_REG_RCR1 0x1C +#define OMAP_MCBSP_REG_XCR2 0x20 +#define OMAP_MCBSP_REG_XCR1 0x24 +#define OMAP_MCBSP_REG_SRGR2 0x28 +#define OMAP_MCBSP_REG_SRGR1 0x2C +#define OMAP_MCBSP_REG_MCR2 0x30 +#define OMAP_MCBSP_REG_MCR1 0x34 +#define OMAP_MCBSP_REG_RCERA 0x38 +#define OMAP_MCBSP_REG_RCERB 0x3C +#define OMAP_MCBSP_REG_XCERA 0x40 +#define OMAP_MCBSP_REG_XCERB 0x44 +#define OMAP_MCBSP_REG_PCR0 0x48 +#define OMAP_MCBSP_REG_RCERC 0x4C +#define OMAP_MCBSP_REG_RCERD 0x50 +#define OMAP_MCBSP_REG_XCERC 0x54 +#define OMAP_MCBSP_REG_XCERD 0x58 +#define OMAP_MCBSP_REG_RCERE 0x5C +#define OMAP_MCBSP_REG_RCERF 0x60 +#define OMAP_MCBSP_REG_XCERE 0x64 +#define OMAP_MCBSP_REG_XCERF 0x68 +#define OMAP_MCBSP_REG_RCERG 0x6C +#define OMAP_MCBSP_REG_RCERH 0x70 +#define OMAP_MCBSP_REG_XCERG 0x74 +#define OMAP_MCBSP_REG_XCERH 0x78 + +#define OMAP_MAX_MCBSP_COUNT 2 +#define MAX_MCBSP_CLOCKS 2 + +#define AUDIO_MCBSP_DATAWRITE (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1) +#define AUDIO_MCBSP_DATAREAD (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1) + +#define AUDIO_MCBSP OMAP_MCBSP2 +#define AUDIO_DMA_TX OMAP24XX_DMA_MCBSP2_TX +#define AUDIO_DMA_RX OMAP24XX_DMA_MCBSP2_RX + +#endif + +#define OMAP_MCBSP_READ(base, reg) __raw_readw((base) + OMAP_MCBSP_REG_##reg) +#define OMAP_MCBSP_WRITE(base, reg, val) __raw_writew((val), (base) + OMAP_MCBSP_REG_##reg) + + +/************************** McBSP SPCR1 bit definitions ***********************/ +#define RRST 0x0001 +#define RRDY 0x0002 +#define RFULL 0x0004 +#define RSYNC_ERR 0x0008 +#define RINTM(value) ((value)<<4) /* bits 4:5 */ +#define ABIS 0x0040 +#define DXENA 0x0080 +#define CLKSTP(value) ((value)<<11) /* bits 11:12 */ +#define RJUST(value) ((value)<<13) /* bits 13:14 */ +#define DLB 0x8000 + +/************************** McBSP SPCR2 bit definitions ***********************/ +#define XRST 0x0001 +#define XRDY 0x0002 +#define XEMPTY 0x0004 +#define XSYNC_ERR 0x0008 +#define XINTM(value) ((value)<<4) /* bits 4:5 */ +#define GRST 0x0040 +#define FRST 0x0080 +#define SOFT 0x0100 +#define FREE 0x0200 + +/************************** McBSP PCR bit definitions *************************/ +#define CLKRP 0x0001 +#define CLKXP 0x0002 +#define FSRP 0x0004 +#define FSXP 0x0008 +#define DR_STAT 0x0010 +#define DX_STAT 0x0020 +#define CLKS_STAT 0x0040 +#define SCLKME 0x0080 +#define CLKRM 0x0100 +#define CLKXM 0x0200 +#define FSRM 0x0400 +#define FSXM 0x0800 +#define RIOEN 0x1000 +#define XIOEN 0x2000 +#define IDLE_EN 0x4000 + +/************************** McBSP RCR1 bit definitions ************************/ +#define RWDLEN1(value) ((value)<<5) /* Bits 5:7 */ +#define RFRLEN1(value) ((value)<<8) /* Bits 8:14 */ + +/************************** McBSP XCR1 bit definitions ************************/ +#define XWDLEN1(value) ((value)<<5) /* Bits 5:7 */ +#define XFRLEN1(value) ((value)<<8) /* Bits 8:14 */ + +/*************************** McBSP RCR2 bit definitions ***********************/ +#define RDATDLY(value) (value) /* Bits 0:1 */ +#define RFIG 0x0004 +#define RCOMPAND(value) ((value)<<3) /* Bits 3:4 */ +#define RWDLEN2(value) ((value)<<5) /* Bits 5:7 */ +#define RFRLEN2(value) ((value)<<8) /* Bits 8:14 */ +#define RPHASE 0x8000 + +/*************************** McBSP XCR2 bit definitions ***********************/ +#define XDATDLY(value) (value) /* Bits 0:1 */ +#define XFIG 0x0004 +#define XCOMPAND(value) ((value)<<3) /* Bits 3:4 */ +#define XWDLEN2(value) ((value)<<5) /* Bits 5:7 */ +#define XFRLEN2(value) ((value)<<8) /* Bits 8:14 */ +#define XPHASE 0x8000 + +/************************* McBSP SRGR1 bit definitions ************************/ +#define CLKGDV(value) (value) /* Bits 0:7 */ +#define FWID(value) ((value)<<8) /* Bits 8:15 */ + +/************************* McBSP SRGR2 bit definitions ************************/ +#define FPER(value) (value) /* Bits 0:11 */ +#define FSGM 0x1000 +#define CLKSM 0x2000 +#define CLKSP 0x4000 +#define GSYNC 0x8000 + +/************************* McBSP MCR1 bit definitions *************************/ +#define RMCM 0x0001 +#define RCBLK(value) ((value)<<2) /* Bits 2:4 */ +#define RPABLK(value) ((value)<<5) /* Bits 5:6 */ +#define RPBBLK(value) ((value)<<7) /* Bits 7:8 */ + +/************************* McBSP MCR2 bit definitions *************************/ +#define XMCM(value) (value) /* Bits 0:1 */ +#define XCBLK(value) ((value)<<2) /* Bits 2:4 */ +#define XPABLK(value) ((value)<<5) /* Bits 5:6 */ +#define XPBBLK(value) ((value)<<7) /* Bits 7:8 */ + + +/* we don't do multichannel for now */ +struct omap_mcbsp_reg_cfg { + u16 spcr2; + u16 spcr1; + u16 rcr2; + u16 rcr1; + u16 xcr2; + u16 xcr1; + u16 srgr2; + u16 srgr1; + u16 mcr2; + u16 mcr1; + u16 pcr0; + u16 rcerc; + u16 rcerd; + u16 xcerc; + u16 xcerd; + u16 rcere; + u16 rcerf; + u16 xcere; + u16 xcerf; + u16 rcerg; + u16 rcerh; + u16 xcerg; + u16 xcerh; +}; + +typedef enum { + OMAP_MCBSP1 = 0, + OMAP_MCBSP2, + OMAP_MCBSP3, +} omap_mcbsp_id; + +typedef int __bitwise omap_mcbsp_io_type_t; +#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1) +#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2) + +typedef enum { + OMAP_MCBSP_WORD_8 = 0, + OMAP_MCBSP_WORD_12, + OMAP_MCBSP_WORD_16, + OMAP_MCBSP_WORD_20, + OMAP_MCBSP_WORD_24, + OMAP_MCBSP_WORD_32, +} omap_mcbsp_word_length; + +typedef enum { + OMAP_MCBSP_CLK_RISING = 0, + OMAP_MCBSP_CLK_FALLING, +} omap_mcbsp_clk_polarity; + +typedef enum { + OMAP_MCBSP_FS_ACTIVE_HIGH = 0, + OMAP_MCBSP_FS_ACTIVE_LOW, +} omap_mcbsp_fs_polarity; + +typedef enum { + OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0, + OMAP_MCBSP_CLK_STP_MODE_DELAY, +} omap_mcbsp_clk_stp_mode; + + +/******* SPI specific mode **********/ +typedef enum { + OMAP_MCBSP_SPI_MASTER = 0, + OMAP_MCBSP_SPI_SLAVE, +} omap_mcbsp_spi_mode; + +struct omap_mcbsp_spi_cfg { + omap_mcbsp_spi_mode spi_mode; + omap_mcbsp_clk_polarity rx_clock_polarity; + omap_mcbsp_clk_polarity tx_clock_polarity; + omap_mcbsp_fs_polarity fsx_polarity; + u8 clk_div; + omap_mcbsp_clk_stp_mode clk_stp_mode; + omap_mcbsp_word_length word_length; +}; + +/* Platform specific configuration */ +struct omap_mcbsp_ops { + void (*request)(unsigned int); + void (*free)(unsigned int); + int (*check)(unsigned int); +}; + +struct omap_mcbsp_platform_data { + u32 virt_base; + u8 dma_rx_sync, dma_tx_sync; + u16 rx_irq, tx_irq; + struct omap_mcbsp_ops *ops; + char const *clk_name; +}; + +struct omap_mcbsp { + struct device *dev; + u32 io_base; + u8 id; + u8 free; + omap_mcbsp_word_length rx_word_length; + omap_mcbsp_word_length tx_word_length; + + omap_mcbsp_io_type_t io_type; /* IRQ or poll */ + /* IRQ based TX/RX */ + int rx_irq; + int tx_irq; + + /* DMA stuff */ + u8 dma_rx_sync; + short dma_rx_lch; + u8 dma_tx_sync; + short dma_tx_lch; + + /* Completion queues */ + struct completion tx_irq_completion; + struct completion rx_irq_completion; + struct completion tx_dma_completion; + struct completion rx_dma_completion; + + /* Protect the field .free, while checking if the mcbsp is in use */ + spinlock_t lock; + struct omap_mcbsp_platform_data *pdata; + struct clk *clk; +}; + +int omap_mcbsp_init(void); +void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, + int size); +void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config); +int omap_mcbsp_request(unsigned int id); +void omap_mcbsp_free(unsigned int id); +void omap_mcbsp_start(unsigned int id); +void omap_mcbsp_stop(unsigned int id); +void omap_mcbsp_xmit_word(unsigned int id, u32 word); +u32 omap_mcbsp_recv_word(unsigned int id); + +int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); +int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); +int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word); +int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word); + + +/* SPI specific API */ +void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg); + +/* Polled read/write functions */ +int omap_mcbsp_pollread(unsigned int id, u16 * buf); +int omap_mcbsp_pollwrite(unsigned int id, u16 buf); + +#endif diff --git a/arch/arm/plat-omap/include/mach/mcspi.h b/arch/arm/plat-omap/include/mach/mcspi.h new file mode 100644 index 000000000000..1254e4945b6f --- /dev/null +++ b/arch/arm/plat-omap/include/mach/mcspi.h @@ -0,0 +1,15 @@ +#ifndef _OMAP2_MCSPI_H +#define _OMAP2_MCSPI_H + +struct omap2_mcspi_platform_config { + unsigned short num_cs; +}; + +struct omap2_mcspi_device_config { + unsigned turbo_mode:1; + + /* Do we want one channel enabled at the same time? */ + unsigned single_channel:1; +}; + +#endif diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h new file mode 100644 index 000000000000..a325caf80d04 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/memory.h @@ -0,0 +1,104 @@ +/* + * arch/arm/plat-omap/include/mach/memory.h + * + * Memory map for OMAP-1510 and 1610 + * + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h + * Copyright (C) 1999 ARM Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#if defined(CONFIG_ARCH_OMAP1) +#define PHYS_OFFSET UL(0x10000000) +#elif defined(CONFIG_ARCH_OMAP2) +#define PHYS_OFFSET UL(0x80000000) +#endif + +/* + * Conversion between SDRAM and fake PCI bus, used by USB + * NOTE: Physical address must be converted to Local Bus address + * on OMAP-1510 only + */ + +/* + * Bus address is physical address, except for OMAP-1510 Local Bus. + */ +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + +/* + * OMAP-1510 bus address is translated into a Local Bus address if the + * OMAP bus type is lbus. We do the address translation based on the + * device overriding the defaults used in the dma-mapping API. + * Note that the is_lbus_device() test is not very efficient on 1510 + * because of the strncmp(). + */ +#ifdef CONFIG_ARCH_OMAP15XX + +/* + * OMAP-1510 Local Bus address offset + */ +#define OMAP1510_LB_OFFSET UL(0x30000000) + +#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET) +#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET) +#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0)) + +#define __arch_page_to_dma(dev, page) ({is_lbus_device(dev) ? \ + (dma_addr_t)virt_to_lbus(page_address(page)) : \ + (dma_addr_t)__virt_to_bus(page_address(page));}) + +#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \ + lbus_to_virt(addr) : \ + __bus_to_virt(addr)); }) + +#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \ + (dma_addr_t) (is_lbus_device(dev) ? \ + virt_to_lbus(__addr) : \ + __virt_to_bus(__addr)); }) + +#endif /* CONFIG_ARCH_OMAP15XX */ + +/* Override the ARM default */ +#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + +#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0) +#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE +#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2 +#endif + +#define CONSISTENT_DMA_SIZE \ + (((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024) + +#endif + +#endif + diff --git a/arch/arm/plat-omap/include/mach/menelaus.h b/arch/arm/plat-omap/include/mach/menelaus.h new file mode 100644 index 000000000000..3122bf68c7ce --- /dev/null +++ b/arch/arm/plat-omap/include/mach/menelaus.h @@ -0,0 +1,49 @@ +/* + * arch/arm/plat-omap/include/mach/menelaus.h + * + * Functions to access Menelaus power management chip + */ + +#ifndef __ASM_ARCH_MENELAUS_H +#define __ASM_ARCH_MENELAUS_H + +struct device; + +struct menelaus_platform_data { + int (* late_init)(struct device *dev); +}; + +extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask), + void *data); +extern void menelaus_unregister_mmc_callback(void); +extern int menelaus_set_mmc_opendrain(int slot, int enable); +extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on); + +extern int menelaus_set_vmem(unsigned int mV); +extern int menelaus_set_vio(unsigned int mV); +extern int menelaus_set_vmmc(unsigned int mV); +extern int menelaus_set_vaux(unsigned int mV); +extern int menelaus_set_vdcdc(int dcdc, unsigned int mV); +extern int menelaus_set_slot_sel(int enable); +extern int menelaus_get_slot_pin_states(void); +extern int menelaus_set_vcore_sw(unsigned int mV); +extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV); + +#define EN_VPLL_SLEEP (1 << 7) +#define EN_VMMC_SLEEP (1 << 6) +#define EN_VAUX_SLEEP (1 << 5) +#define EN_VIO_SLEEP (1 << 4) +#define EN_VMEM_SLEEP (1 << 3) +#define EN_DC3_SLEEP (1 << 2) +#define EN_DC2_SLEEP (1 << 1) +#define EN_VC_SLEEP (1 << 0) + +extern int menelaus_set_regulator_sleep(int enable, u32 val); + +#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS) +#define omap_has_menelaus() 1 +#else +#define omap_has_menelaus() 0 +#endif + +#endif diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h new file mode 100644 index 000000000000..fc15d13058fc --- /dev/null +++ b/arch/arm/plat-omap/include/mach/mmc.h @@ -0,0 +1,74 @@ +/* + * MMC definitions for OMAP2 + * + * Copyright (C) 2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __OMAP2_MMC_H +#define __OMAP2_MMC_H + +#include <linux/types.h> +#include <linux/device.h> +#include <linux/mmc/host.h> + +#include <mach/board.h> + +#define OMAP_MMC_MAX_SLOTS 2 + +struct omap_mmc_platform_data { + struct omap_mmc_conf conf; + + /* number of slots on board */ + unsigned nr_slots:2; + + /* set if your board has components or wiring that limits the + * maximum frequency on the MMC bus */ + unsigned int max_freq; + + /* switch the bus to a new slot */ + int (* switch_slot)(struct device *dev, int slot); + /* initialize board-specific MMC functionality, can be NULL if + * not supported */ + int (* init)(struct device *dev); + void (* cleanup)(struct device *dev); + void (* shutdown)(struct device *dev); + + /* To handle board related suspend/resume functionality for MMC */ + int (*suspend)(struct device *dev, int slot); + int (*resume)(struct device *dev, int slot); + + struct omap_mmc_slot_data { + int (* set_bus_mode)(struct device *dev, int slot, int bus_mode); + int (* set_power)(struct device *dev, int slot, int power_on, int vdd); + int (* get_ro)(struct device *dev, int slot); + + /* return MMC cover switch state, can be NULL if not supported. + * + * possible return values: + * 0 - open + * 1 - closed + */ + int (* get_cover_state)(struct device *dev, int slot); + + const char *name; + u32 ocr_mask; + + /* Card detection IRQs */ + int card_detect_irq; + int (* card_detect)(int irq); + + unsigned int ban_openended:1; + + } slots[OMAP_MMC_MAX_SLOTS]; +}; + +extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info); + +/* called from board-specific card detection service routine */ +extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed); + +#endif diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/plat-omap/include/mach/mtd-xip.h new file mode 100644 index 000000000000..5cee7e16a1b4 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/mtd-xip.h @@ -0,0 +1,61 @@ +/* + * MTD primitives for XIP support. Architecture specific functions. + * + * Do not include this file directly. It's included from linux/mtd/xip.h + * + * Author: Vladimir Barinov <vbarinov@ru.mvista.com> + * + * (c) 2005 MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express or + * implied. + */ + +#ifndef __ARCH_OMAP_MTD_XIP_H__ +#define __ARCH_OMAP_MTD_XIP_H__ + +#include <mach/hardware.h> +#define OMAP_MPU_TIMER_BASE (0xfffec500) +#define OMAP_MPU_TIMER_OFFSET 0x100 + +typedef struct { + u32 cntl; /* CNTL_TIMER, R/W */ + u32 load_tim; /* LOAD_TIM, W */ + u32 read_tim; /* READ_TIM, R */ +} xip_omap_mpu_timer_regs_t; + +#define xip_omap_mpu_timer_base(n) \ +((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE + \ + (n)*OMAP_MPU_TIMER_OFFSET)) + +static inline unsigned long xip_omap_mpu_timer_read(int nr) +{ + volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr); + return timer->read_tim; +} + +#define xip_irqpending() \ + (omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR)) +#define xip_currtime() (~xip_omap_mpu_timer_read(0)) + +/* + * It's permitted to do approxmation for xip_elapsed_since macro + * (see linux/mtd/xip.h) + */ + +#ifdef CONFIG_MACH_OMAP_PERSEUS2 +#define xip_elapsed_since(x) (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7) +#else +#define xip_elapsed_since(x) (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6) +#endif + +/* + * xip_cpu_idle() is used when waiting for a delay equal or larger than + * the system timer tick period. This should put the CPU into idle mode + * to save power and to be woken up only when some interrupts are pending. + * As above, this should not rely upon standard kernel code. + */ + +#define xip_cpu_idle() asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1)) + +#endif /* __ARCH_OMAP_MTD_XIP_H__ */ diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h new file mode 100644 index 000000000000..614b2c1327c7 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -0,0 +1,615 @@ +/* + * arch/arm/plat-omap/include/mach/mux.h + * + * Table of the Omap register configurations for the FUNC_MUX and + * PULL_DWN combinations. + * + * Copyright (C) 2004 - 2008 Texas Instruments Inc. + * Copyright (C) 2003 - 2008 Nokia Corporation + * + * Written by Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * NOTE: Please use the following naming style for new pin entries. + * For example, W8_1610_MMC2_DAT0, where: + * - W8 = ball + * - 1610 = 1510 or 1610, none if common for both 1510 and 1610 + * - MMC2_DAT0 = function + */ + +#ifndef __ASM_ARCH_MUX_H +#define __ASM_ARCH_MUX_H + +#define PU_PD_SEL_NA 0 /* No pu_pd reg available */ +#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */ + +#ifdef CONFIG_OMAP_MUX_DEBUG +#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \ + .mux_reg = FUNC_MUX_CTRL_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \ + .pull_reg = PULL_DWN_CTRL_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + +#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \ + .pu_pd_reg = PU_PD_SEL_##reg, \ + .pu_pd_val = status, + +#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \ + .mux_reg = OMAP730_IO_CONF_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \ + .pull_reg = OMAP730_IO_CONF_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + +#else + +#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + +#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \ + .pu_pd_val = status, + +#define MUX_REG_730(reg, mode_offset, mode) \ + .mux_reg = OMAP730_IO_CONF_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + +#endif /* CONFIG_OMAP_MUX_DEBUG */ + +#define MUX_CFG(desc, mux_reg, mode_offset, mode, \ + pull_reg, pull_bit, pull_status, \ + pu_pd_reg, pu_pd_status, debug_status) \ +{ \ + .name = desc, \ + .debug = debug_status, \ + MUX_REG(mux_reg, mode_offset, mode) \ + PULL_REG(pull_reg, pull_bit, pull_status) \ + PU_PD_REG(pu_pd_reg, pu_pd_status) \ +}, + + +/* + * OMAP730 has a slightly different config for the pin mux. + * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and + * not the FUNC_MUX_CTRL_x regs from hardware.h + * - for pull-up/down, only has one enable bit which is is in the same register + * as mux config + */ +#define MUX_CFG_730(desc, mux_reg, mode_offset, mode, \ + pull_bit, pull_status, debug_status)\ +{ \ + .name = desc, \ + .debug = debug_status, \ + MUX_REG_730(mux_reg, mode_offset, mode) \ + PULL_REG_730(mux_reg, pull_bit, pull_status) \ + PU_PD_REG(NA, 0) \ +}, + +#define MUX_CFG_24XX(desc, reg_offset, mode, \ + pull_en, pull_mode, dbg) \ +{ \ + .name = desc, \ + .debug = dbg, \ + .mux_reg = reg_offset, \ + .mask = mode, \ + .pull_val = pull_en, \ + .pu_pd_val = pull_mode, \ +}, + + +#define PULL_DISABLED 0 +#define PULL_ENABLED 1 + +#define PULL_DOWN 0 +#define PULL_UP 1 + +struct pin_config { + char *name; + unsigned char busy; + unsigned char debug; + + const char *mux_reg_name; + const unsigned int mux_reg; + const unsigned char mask_offset; + const unsigned char mask; + + const char *pull_name; + const unsigned int pull_reg; + const unsigned char pull_val; + const unsigned char pull_bit; + + const char *pu_pd_name; + const unsigned int pu_pd_reg; + const unsigned char pu_pd_val; +}; + +enum omap730_index { + /* OMAP 730 keyboard */ + E2_730_KBR0, + J7_730_KBR1, + E1_730_KBR2, + F3_730_KBR3, + D2_730_KBR4, + C2_730_KBC0, + D3_730_KBC1, + E4_730_KBC2, + F4_730_KBC3, + E3_730_KBC4, + + /* USB */ + AA17_730_USB_DM, + W16_730_USB_PU_EN, + W17_730_USB_VBUSI, +}; + +enum omap1xxx_index { + /* UART1 (BT_UART_GATING)*/ + UART1_TX = 0, + UART1_RTS, + + /* UART2 (COM_UART_GATING)*/ + UART2_TX, + UART2_RX, + UART2_CTS, + UART2_RTS, + + /* UART3 (GIGA_UART_GATING) */ + UART3_TX, + UART3_RX, + UART3_CTS, + UART3_RTS, + UART3_CLKREQ, + UART3_BCLK, /* 12MHz clock out */ + Y15_1610_UART3_RTS, + + /* PWT & PWL */ + PWT, + PWL, + + /* USB master generic */ + R18_USB_VBUS, + R18_1510_USB_GPIO0, + W4_USB_PUEN, + W4_USB_CLKO, + W4_USB_HIGHZ, + W4_GPIO58, + + /* USB1 master */ + USB1_SUSP, + USB1_SEO, + W13_1610_USB1_SE0, + USB1_TXEN, + USB1_TXD, + USB1_VP, + USB1_VM, + USB1_RCV, + USB1_SPEED, + R13_1610_USB1_SPEED, + R13_1710_USB1_SE0, + + /* USB2 master */ + USB2_SUSP, + USB2_VP, + USB2_TXEN, + USB2_VM, + USB2_RCV, + USB2_SEO, + USB2_TXD, + + /* OMAP-1510 GPIO */ + R18_1510_GPIO0, + R19_1510_GPIO1, + M14_1510_GPIO2, + + /* OMAP1610 GPIO */ + P18_1610_GPIO3, + Y15_1610_GPIO17, + + /* OMAP-1710 GPIO */ + R18_1710_GPIO0, + V2_1710_GPIO10, + N21_1710_GPIO14, + W15_1710_GPIO40, + + /* MPUIO */ + MPUIO2, + N15_1610_MPUIO2, + MPUIO4, + MPUIO5, + T20_1610_MPUIO5, + W11_1610_MPUIO6, + V10_1610_MPUIO7, + W11_1610_MPUIO9, + V10_1610_MPUIO10, + W10_1610_MPUIO11, + E20_1610_MPUIO13, + U20_1610_MPUIO14, + E19_1610_MPUIO15, + + /* MCBSP2 */ + MCBSP2_CLKR, + MCBSP2_CLKX, + MCBSP2_DR, + MCBSP2_DX, + MCBSP2_FSR, + MCBSP2_FSX, + + /* MCBSP3 */ + MCBSP3_CLKX, + + /* Misc ballouts */ + BALLOUT_V8_ARMIO3, + N20_HDQ, + + /* OMAP-1610 MMC2 */ + W8_1610_MMC2_DAT0, + V8_1610_MMC2_DAT1, + W15_1610_MMC2_DAT2, + R10_1610_MMC2_DAT3, + Y10_1610_MMC2_CLK, + Y8_1610_MMC2_CMD, + V9_1610_MMC2_CMDDIR, + V5_1610_MMC2_DATDIR0, + W19_1610_MMC2_DATDIR1, + R18_1610_MMC2_CLKIN, + + /* OMAP-1610 External Trace Interface */ + M19_1610_ETM_PSTAT0, + L15_1610_ETM_PSTAT1, + L18_1610_ETM_PSTAT2, + L19_1610_ETM_D0, + J19_1610_ETM_D6, + J18_1610_ETM_D7, + + /* OMAP16XX GPIO */ + P20_1610_GPIO4, + V9_1610_GPIO7, + W8_1610_GPIO9, + N20_1610_GPIO11, + N19_1610_GPIO13, + P10_1610_GPIO22, + V5_1610_GPIO24, + AA20_1610_GPIO_41, + W19_1610_GPIO48, + M7_1610_GPIO62, + V14_16XX_GPIO37, + R9_16XX_GPIO18, + L14_16XX_GPIO49, + + /* OMAP-1610 uWire */ + V19_1610_UWIRE_SCLK, + U18_1610_UWIRE_SDI, + W21_1610_UWIRE_SDO, + N14_1610_UWIRE_CS0, + P15_1610_UWIRE_CS3, + N15_1610_UWIRE_CS1, + + /* OMAP-1610 SPI */ + U19_1610_SPIF_SCK, + U18_1610_SPIF_DIN, + P20_1610_SPIF_DIN, + W21_1610_SPIF_DOUT, + R18_1610_SPIF_DOUT, + N14_1610_SPIF_CS0, + N15_1610_SPIF_CS1, + T19_1610_SPIF_CS2, + P15_1610_SPIF_CS3, + + /* OMAP-1610 Flash */ + L3_1610_FLASH_CS2B_OE, + M8_1610_FLASH_CS2B_WE, + + /* First MMC */ + MMC_CMD, + MMC_DAT1, + MMC_DAT2, + MMC_DAT0, + MMC_CLK, + MMC_DAT3, + + /* OMAP-1710 MMC CMDDIR and DATDIR0 */ + M15_1710_MMC_CLKI, + P19_1710_MMC_CMDDIR, + P20_1710_MMC_DATDIR0, + + /* OMAP-1610 USB0 alternate pin configuration */ + W9_USB0_TXEN, + AA9_USB0_VP, + Y5_USB0_RCV, + R9_USB0_VM, + V6_USB0_TXD, + W5_USB0_SE0, + V9_USB0_SPEED, + V9_USB0_SUSP, + + /* USB2 */ + W9_USB2_TXEN, + AA9_USB2_VP, + Y5_USB2_RCV, + R9_USB2_VM, + V6_USB2_TXD, + W5_USB2_SE0, + + /* 16XX UART */ + R13_1610_UART1_TX, + V14_16XX_UART1_RX, + R14_1610_UART1_CTS, + AA15_1610_UART1_RTS, + R9_16XX_UART2_RX, + L14_16XX_UART3_RX, + + /* I2C OMAP-1610 */ + I2C_SCL, + I2C_SDA, + + /* Keypad */ + F18_1610_KBC0, + D20_1610_KBC1, + D19_1610_KBC2, + E18_1610_KBC3, + C21_1610_KBC4, + G18_1610_KBR0, + F19_1610_KBR1, + H14_1610_KBR2, + E20_1610_KBR3, + E19_1610_KBR4, + N19_1610_KBR5, + + /* Power management */ + T20_1610_LOW_PWR, + + /* MCLK Settings */ + V5_1710_MCLK_ON, + V5_1710_MCLK_OFF, + R10_1610_MCLK_ON, + R10_1610_MCLK_OFF, + + /* CompactFlash controller */ + P11_1610_CF_CD2, + R11_1610_CF_IOIS16, + V10_1610_CF_IREQ, + W10_1610_CF_RESET, + W11_1610_CF_CD1, + + /* parallel camera */ + J15_1610_CAM_LCLK, + J18_1610_CAM_D7, + J19_1610_CAM_D6, + J14_1610_CAM_D5, + K18_1610_CAM_D4, + K19_1610_CAM_D3, + K15_1610_CAM_D2, + K14_1610_CAM_D1, + L19_1610_CAM_D0, + L18_1610_CAM_VS, + L15_1610_CAM_HS, + M19_1610_CAM_RSTZ, + Y15_1610_CAM_OUTCLK, + + /* serial camera */ + H19_1610_CAM_EXCLK, + Y12_1610_CCP_CLKP, + W13_1610_CCP_CLKM, + W14_1610_CCP_DATAP, + Y14_1610_CCP_DATAM, + +}; + +enum omap24xx_index { + /* 24xx I2C */ + M19_24XX_I2C1_SCL, + L15_24XX_I2C1_SDA, + J15_24XX_I2C2_SCL, + H19_24XX_I2C2_SDA, + + /* 24xx Menelaus interrupt */ + W19_24XX_SYS_NIRQ, + + /* 24xx clock */ + W14_24XX_SYS_CLKOUT, + + /* 24xx GPMC chipselects, wait pin monitoring */ + E2_GPMC_NCS2, + L2_GPMC_NCS7, + L3_GPMC_WAIT0, + N7_GPMC_WAIT1, + M1_GPMC_WAIT2, + P1_GPMC_WAIT3, + + /* 242X McBSP */ + Y15_24XX_MCBSP2_CLKX, + R14_24XX_MCBSP2_FSX, + W15_24XX_MCBSP2_DR, + V15_24XX_MCBSP2_DX, + + /* 24xx GPIO */ + M21_242X_GPIO11, + P21_242X_GPIO12, + AA10_242X_GPIO13, + AA6_242X_GPIO14, + AA4_242X_GPIO15, + Y11_242X_GPIO16, + AA12_242X_GPIO17, + AA8_242X_GPIO58, + Y20_24XX_GPIO60, + W4__24XX_GPIO74, + N15_24XX_GPIO85, + M15_24XX_GPIO92, + P20_24XX_GPIO93, + P18_24XX_GPIO95, + M18_24XX_GPIO96, + L14_24XX_GPIO97, + J15_24XX_GPIO99, + V14_24XX_GPIO117, + P14_24XX_GPIO125, + + /* 242x DBG GPIO */ + V4_242X_GPIO49, + W2_242X_GPIO50, + U4_242X_GPIO51, + V3_242X_GPIO52, + V2_242X_GPIO53, + V6_242X_GPIO53, + T4_242X_GPIO54, + Y4_242X_GPIO54, + T3_242X_GPIO55, + U2_242X_GPIO56, + + /* 24xx external DMA requests */ + AA10_242X_DMAREQ0, + AA6_242X_DMAREQ1, + E4_242X_DMAREQ2, + G4_242X_DMAREQ3, + D3_242X_DMAREQ4, + E3_242X_DMAREQ5, + + /* UART3 */ + K15_24XX_UART3_TX, + K14_24XX_UART3_RX, + + /* MMC/SDIO */ + G19_24XX_MMC_CLKO, + H18_24XX_MMC_CMD, + F20_24XX_MMC_DAT0, + H14_24XX_MMC_DAT1, + E19_24XX_MMC_DAT2, + D19_24XX_MMC_DAT3, + F19_24XX_MMC_DAT_DIR0, + E20_24XX_MMC_DAT_DIR1, + F18_24XX_MMC_DAT_DIR2, + E18_24XX_MMC_DAT_DIR3, + G18_24XX_MMC_CMD_DIR, + H15_24XX_MMC_CLKI, + + /* Full speed USB */ + J20_24XX_USB0_PUEN, + J19_24XX_USB0_VP, + K20_24XX_USB0_VM, + J18_24XX_USB0_RCV, + K19_24XX_USB0_TXEN, + J14_24XX_USB0_SE0, + K18_24XX_USB0_DAT, + + N14_24XX_USB1_SE0, + W12_24XX_USB1_SE0, + P15_24XX_USB1_DAT, + R13_24XX_USB1_DAT, + W20_24XX_USB1_TXEN, + P13_24XX_USB1_TXEN, + V19_24XX_USB1_RCV, + V12_24XX_USB1_RCV, + + AA10_24XX_USB2_SE0, + Y11_24XX_USB2_DAT, + AA12_24XX_USB2_TXEN, + AA6_24XX_USB2_RCV, + AA4_24XX_USB2_TLLSE0, + + /* Keypad GPIO*/ + T19_24XX_KBR0, + R19_24XX_KBR1, + V18_24XX_KBR2, + M21_24XX_KBR3, + E5__24XX_KBR4, + M18_24XX_KBR5, + R20_24XX_KBC0, + M14_24XX_KBC1, + H19_24XX_KBC2, + V17_24XX_KBC3, + P21_24XX_KBC4, + L14_24XX_KBC5, + N19_24XX_KBC6, + + /* 24xx Menelaus Keypad GPIO */ + B3__24XX_KBR5, + AA4_24XX_KBC2, + B13_24XX_KBC6, + + /* 2430 USB */ + AD9_2430_USB0_PUEN, + Y11_2430_USB0_VP, + AD7_2430_USB0_VM, + AE7_2430_USB0_RCV, + AD4_2430_USB0_TXEN, + AF9_2430_USB0_SE0, + AE6_2430_USB0_DAT, + AD24_2430_USB1_SE0, + AB24_2430_USB1_RCV, + Y25_2430_USB1_TXEN, + AA26_2430_USB1_DAT, + + /* 2430 HS-USB */ + AD9_2430_USB0HS_DATA3, + Y11_2430_USB0HS_DATA4, + AD7_2430_USB0HS_DATA5, + AE7_2430_USB0HS_DATA6, + AD4_2430_USB0HS_DATA2, + AF9_2430_USB0HS_DATA0, + AE6_2430_USB0HS_DATA1, + AE8_2430_USB0HS_CLK, + AD8_2430_USB0HS_DIR, + AE5_2430_USB0HS_STP, + AE9_2430_USB0HS_NXT, + AC7_2430_USB0HS_DATA7, + + /* 2430 McBSP */ + AC10_2430_MCBSP2_FSX, + AD16_2430_MCBSP2_CLX, + AE13_2430_MCBSP2_DX, + AD13_2430_MCBSP2_DR, + AC10_2430_MCBSP2_FSX_OFF, + AD16_2430_MCBSP2_CLX_OFF, + AE13_2430_MCBSP2_DX_OFF, + AD13_2430_MCBSP2_DR_OFF, + +}; + +struct omap_mux_cfg { + struct pin_config *pins; + unsigned long size; + int (*cfg_reg)(const struct pin_config *cfg); +}; + +#ifdef CONFIG_OMAP_MUX +/* setup pin muxing in Linux */ +extern int omap1_mux_init(void); +extern int omap2_mux_init(void); +extern int omap_mux_register(struct omap_mux_cfg *); +extern int omap_cfg_reg(unsigned long reg_cfg); +#else +/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ +static inline int omap1_mux_init(void) { return 0; } +static inline int omap2_mux_init(void) { return 0; } +static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; } +#endif + +#endif diff --git a/arch/arm/plat-omap/include/mach/nand.h b/arch/arm/plat-omap/include/mach/nand.h new file mode 100644 index 000000000000..631a7bed1eef --- /dev/null +++ b/arch/arm/plat-omap/include/mach/nand.h @@ -0,0 +1,24 @@ +/* + * arch/arm/plat-omap/include/mach/nand.h + * + * Copyright (C) 2006 Micron Technology Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/mtd/partitions.h> + +struct omap_nand_platform_data { + unsigned int options; + int cs; + int gpio_irq; + struct mtd_partition *parts; + int nr_parts; + int (*nand_setup)(void __iomem *); + int (*dev_ready)(struct omap_nand_platform_data *); + int dma_channel; + void __iomem *gpmc_cs_baseaddr; + void __iomem *gpmc_baseaddr; +}; diff --git a/arch/arm/plat-omap/include/mach/omap-alsa.h b/arch/arm/plat-omap/include/mach/omap-alsa.h new file mode 100644 index 000000000000..bdf30a0f87f2 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/omap-alsa.h @@ -0,0 +1,123 @@ +/* + * arch/arm/plat-omap/include/mach/omap-alsa.h + * + * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards. + * + * Copyright (C) 2006 Mika Laitio <lamikr@cc.jyu.fi> + * + * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil + * Written by Daniel Petrini, David Cohen, Anderson Briglia + * {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * History + * ------- + * + * 2005/07/25 INdT-10LE Kernel Team - Alsa driver for omap osk, + * original version based in sa1100 driver + * and omap oss driver. + */ + +#ifndef __OMAP_ALSA_H +#define __OMAP_ALSA_H + +#include <mach/dma.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <mach/mcbsp.h> +#include <linux/platform_device.h> + +#define DMA_BUF_SIZE (1024 * 8) + +/* + * Buffer management for alsa and dma + */ +struct audio_stream { + char *id; /* identification string */ + int stream_id; /* numeric identification */ + int dma_dev; /* dma number of that device */ + int *lch; /* Chain of channels this stream is linked to */ + char started; /* to store if the chain was started or not */ + int dma_q_head; /* DMA Channel Q Head */ + int dma_q_tail; /* DMA Channel Q Tail */ + char dma_q_count; /* DMA Channel Q Count */ + int active:1; /* we are using this stream for transfer now */ + int period; /* current transfer period */ + int periods; /* current count of periods registerd in the DMA engine */ + spinlock_t dma_lock; /* for locking in DMA operations */ + struct snd_pcm_substream *stream; /* the pcm stream */ + unsigned linked:1; /* dma channels linked */ + int offset; /* store start position of the last period in the alsa buffer */ + int (*hw_start)(void); /* interface to start HW interface, e.g. McBSP */ + int (*hw_stop)(void); /* interface to stop HW interface, e.g. McBSP */ +}; + +/* + * Alsa card structure for aic23 + */ +struct snd_card_omap_codec { + struct snd_card *card; + struct snd_pcm *pcm; + long samplerate; + struct audio_stream s[2]; /* playback & capture */ +}; + +/* Codec specific information and function pointers. + * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c) + * are responsible for defining the function pointers. + */ +struct omap_alsa_codec_config { + char *name; + struct omap_mcbsp_reg_cfg *mcbsp_regs_alsa; + struct snd_pcm_hw_constraint_list *hw_constraints_rates; + struct snd_pcm_hardware *snd_omap_alsa_playback; + struct snd_pcm_hardware *snd_omap_alsa_capture; + void (*codec_configure_dev)(void); + void (*codec_set_samplerate)(long); + void (*codec_clock_setup)(void); + int (*codec_clock_on)(void); + int (*codec_clock_off)(void); + int (*get_default_samplerate)(void); +}; + +/*********** Mixer function prototypes *************************/ +int snd_omap_mixer(struct snd_card_omap_codec *); +void snd_omap_init_mixer(void); + +#ifdef CONFIG_PM +void snd_omap_suspend_mixer(void); +void snd_omap_resume_mixer(void); +#endif + +int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config); +int snd_omap_alsa_remove(struct platform_device *pdev); +#ifdef CONFIG_PM +int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state); +int snd_omap_alsa_resume(struct platform_device *pdev); +#else +#define snd_omap_alsa_suspend NULL +#define snd_omap_alsa_resume NULL +#endif + +void callback_omap_alsa_sound_dma(void *); + +#endif diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/mach/omap1510.h new file mode 100644 index 000000000000..505a38af8b22 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/omap1510.h @@ -0,0 +1,48 @@ +/* arch/arm/plat-omap/include/mach/omap1510.h + * + * Hardware definitions for TI OMAP1510 processor. + * + * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP15XX_H +#define __ASM_ARCH_OMAP15XX_H + +/* + * ---------------------------------------------------------------------------- + * Base addresses + * ---------------------------------------------------------------------------- + */ + +/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ + +#define OMAP1510_DSP_BASE 0xE0000000 +#define OMAP1510_DSP_SIZE 0x28000 +#define OMAP1510_DSP_START 0xE0000000 + +#define OMAP1510_DSPREG_BASE 0xE1000000 +#define OMAP1510_DSPREG_SIZE SZ_128K +#define OMAP1510_DSPREG_START 0xE1000000 + +#endif /* __ASM_ARCH_OMAP15XX_H */ + diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h new file mode 100644 index 000000000000..c6c93afb2788 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/omap16xx.h @@ -0,0 +1,197 @@ +/* arch/arm/plat-omap/include/mach/omap16xx.h + * + * Hardware definitions for TI OMAP1610/5912/1710 processors. + * + * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP16XX_H +#define __ASM_ARCH_OMAP16XX_H + +/* + * ---------------------------------------------------------------------------- + * Base addresses + * ---------------------------------------------------------------------------- + */ + +/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ + +#define OMAP16XX_DSP_BASE 0xE0000000 +#define OMAP16XX_DSP_SIZE 0x28000 +#define OMAP16XX_DSP_START 0xE0000000 + +#define OMAP16XX_DSPREG_BASE 0xE1000000 +#define OMAP16XX_DSPREG_SIZE SZ_128K +#define OMAP16XX_DSPREG_START 0xE1000000 + +/* + * --------------------------------------------------------------------------- + * Interrupts + * --------------------------------------------------------------------------- + */ +#define OMAP_IH2_0_BASE (0xfffe0000) +#define OMAP_IH2_1_BASE (0xfffe0100) +#define OMAP_IH2_2_BASE (0xfffe0200) +#define OMAP_IH2_3_BASE (0xfffe0300) + +#define OMAP_IH2_0_ITR (OMAP_IH2_0_BASE + 0x00) +#define OMAP_IH2_0_MIR (OMAP_IH2_0_BASE + 0x04) +#define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10) +#define OMAP_IH2_0_SIR_FIQ (OMAP_IH2_0_BASE + 0x14) +#define OMAP_IH2_0_CONTROL (OMAP_IH2_0_BASE + 0x18) +#define OMAP_IH2_0_ILR0 (OMAP_IH2_0_BASE + 0x1c) +#define OMAP_IH2_0_ISR (OMAP_IH2_0_BASE + 0x9c) + +#define OMAP_IH2_1_ITR (OMAP_IH2_1_BASE + 0x00) +#define OMAP_IH2_1_MIR (OMAP_IH2_1_BASE + 0x04) +#define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10) +#define OMAP_IH2_1_SIR_FIQ (OMAP_IH2_1_BASE + 0x14) +#define OMAP_IH2_1_CONTROL (OMAP_IH2_1_BASE + 0x18) +#define OMAP_IH2_1_ILR1 (OMAP_IH2_1_BASE + 0x1c) +#define OMAP_IH2_1_ISR (OMAP_IH2_1_BASE + 0x9c) + +#define OMAP_IH2_2_ITR (OMAP_IH2_2_BASE + 0x00) +#define OMAP_IH2_2_MIR (OMAP_IH2_2_BASE + 0x04) +#define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10) +#define OMAP_IH2_2_SIR_FIQ (OMAP_IH2_2_BASE + 0x14) +#define OMAP_IH2_2_CONTROL (OMAP_IH2_2_BASE + 0x18) +#define OMAP_IH2_2_ILR2 (OMAP_IH2_2_BASE + 0x1c) +#define OMAP_IH2_2_ISR (OMAP_IH2_2_BASE + 0x9c) + +#define OMAP_IH2_3_ITR (OMAP_IH2_3_BASE + 0x00) +#define OMAP_IH2_3_MIR (OMAP_IH2_3_BASE + 0x04) +#define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10) +#define OMAP_IH2_3_SIR_FIQ (OMAP_IH2_3_BASE + 0x14) +#define OMAP_IH2_3_CONTROL (OMAP_IH2_3_BASE + 0x18) +#define OMAP_IH2_3_ILR3 (OMAP_IH2_3_BASE + 0x1c) +#define OMAP_IH2_3_ISR (OMAP_IH2_3_BASE + 0x9c) + +/* + * ---------------------------------------------------------------------------- + * Clocks + * ---------------------------------------------------------------------------- + */ +#define OMAP16XX_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) + +/* + * ---------------------------------------------------------------------------- + * Pin configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP16XX_CONF_VOLTAGE_VDDSHV6 (1 << 8) +#define OMAP16XX_CONF_VOLTAGE_VDDSHV7 (1 << 9) +#define OMAP16XX_CONF_VOLTAGE_VDDSHV8 (1 << 10) +#define OMAP16XX_CONF_VOLTAGE_VDDSHV9 (1 << 11) +#define OMAP16XX_SUBLVDS_CONF_VALID (1 << 13) + +/* + * ---------------------------------------------------------------------------- + * System control registers + * ---------------------------------------------------------------------------- + */ +#define OMAP1610_RESET_CONTROL 0xfffe1140 + +/* + * --------------------------------------------------------------------------- + * TIPB bus interface + * --------------------------------------------------------------------------- + */ +#define TIPB_SWITCH_BASE (0xfffbc800) +#define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160) + +/* UART3 Registers Maping through MPU bus */ +#define UART3_RHR (OMAP_UART3_BASE + 0) +#define UART3_THR (OMAP_UART3_BASE + 0) +#define UART3_DLL (OMAP_UART3_BASE + 0) +#define UART3_IER (OMAP_UART3_BASE + 4) +#define UART3_DLH (OMAP_UART3_BASE + 4) +#define UART3_IIR (OMAP_UART3_BASE + 8) +#define UART3_FCR (OMAP_UART3_BASE + 8) +#define UART3_EFR (OMAP_UART3_BASE + 8) +#define UART3_LCR (OMAP_UART3_BASE + 0x0C) +#define UART3_MCR (OMAP_UART3_BASE + 0x10) +#define UART3_XON1_ADDR1 (OMAP_UART3_BASE + 0x10) +#define UART3_XON2_ADDR2 (OMAP_UART3_BASE + 0x14) +#define UART3_LSR (OMAP_UART3_BASE + 0x14) +#define UART3_TCR (OMAP_UART3_BASE + 0x18) +#define UART3_MSR (OMAP_UART3_BASE + 0x18) +#define UART3_XOFF1 (OMAP_UART3_BASE + 0x18) +#define UART3_XOFF2 (OMAP_UART3_BASE + 0x1C) +#define UART3_SPR (OMAP_UART3_BASE + 0x1C) +#define UART3_TLR (OMAP_UART3_BASE + 0x1C) +#define UART3_MDR1 (OMAP_UART3_BASE + 0x20) +#define UART3_MDR2 (OMAP_UART3_BASE + 0x24) +#define UART3_SFLSR (OMAP_UART3_BASE + 0x28) +#define UART3_TXFLL (OMAP_UART3_BASE + 0x28) +#define UART3_RESUME (OMAP_UART3_BASE + 0x2C) +#define UART3_TXFLH (OMAP_UART3_BASE + 0x2C) +#define UART3_SFREGL (OMAP_UART3_BASE + 0x30) +#define UART3_RXFLL (OMAP_UART3_BASE + 0x30) +#define UART3_SFREGH (OMAP_UART3_BASE + 0x34) +#define UART3_RXFLH (OMAP_UART3_BASE + 0x34) +#define UART3_BLR (OMAP_UART3_BASE + 0x38) +#define UART3_ACREG (OMAP_UART3_BASE + 0x3C) +#define UART3_DIV16 (OMAP_UART3_BASE + 0x3C) +#define UART3_SCR (OMAP_UART3_BASE + 0x40) +#define UART3_SSR (OMAP_UART3_BASE + 0x44) +#define UART3_EBLR (OMAP_UART3_BASE + 0x48) +#define UART3_OSC_12M_SEL (OMAP_UART3_BASE + 0x4C) +#define UART3_MVR (OMAP_UART3_BASE + 0x50) + +/* + * --------------------------------------------------------------------------- + * Watchdog timer + * --------------------------------------------------------------------------- + */ + +/* 32-bit Watchdog timer in OMAP 16XX */ +#define OMAP_16XX_WATCHDOG_BASE (0xfffeb000) +#define OMAP_16XX_WIDR (OMAP_16XX_WATCHDOG_BASE + 0x00) +#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10) +#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14) +#define OMAP_16XX_WCLR (OMAP_16XX_WATCHDOG_BASE + 0x24) +#define OMAP_16XX_WCRR (OMAP_16XX_WATCHDOG_BASE + 0x28) +#define OMAP_16XX_WLDR (OMAP_16XX_WATCHDOG_BASE + 0x2c) +#define OMAP_16XX_WTGR (OMAP_16XX_WATCHDOG_BASE + 0x30) +#define OMAP_16XX_WWPS (OMAP_16XX_WATCHDOG_BASE + 0x34) +#define OMAP_16XX_WSPR (OMAP_16XX_WATCHDOG_BASE + 0x48) + +#define WCLR_PRE_SHIFT 5 +#define WCLR_PTV_SHIFT 2 + +#define WWPS_W_PEND_WSPR (1 << 4) +#define WWPS_W_PEND_WTGR (1 << 3) +#define WWPS_W_PEND_WLDR (1 << 2) +#define WWPS_W_PEND_WCRR (1 << 1) +#define WWPS_W_PEND_WCLR (1 << 0) + +#define WSPR_ENABLE_0 (0x0000bbbb) +#define WSPR_ENABLE_1 (0x00004444) +#define WSPR_DISABLE_0 (0x0000aaaa) +#define WSPR_DISABLE_1 (0x00005555) + +/* Mailbox */ +#define OMAP16XX_MAILBOX_BASE (0xfffcf000) + +#endif /* __ASM_ARCH_OMAP16XX_H */ + diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h new file mode 100644 index 000000000000..bb8319d66e9f --- /dev/null +++ b/arch/arm/plat-omap/include/mach/omap24xx.h @@ -0,0 +1,107 @@ +/* + * arch/arm/plat-omap/include/mach/omap24xx.h + * + * This file contains the processor specific definitions + * of the TI OMAP24XX. + * + * Copyright (C) 2007 Texas Instruments. + * Copyright (C) 2007 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_OMAP24XX_H +#define __ASM_ARCH_OMAP24XX_H + +/* + * Please place only base defines here and put the rest in device + * specific headers. Note also that some of these defines are needed + * for omap1 to compile without adding ifdefs. + */ + +#define L4_24XX_BASE 0x48000000 +#define L4_WK_243X_BASE 0x49000000 +#define L3_24XX_BASE 0x68000000 + +/* interrupt controller */ +#define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000) +#define OMAP24XX_IVA_INTC_BASE 0x40000000 +#define IRQ_SIR_IRQ 0x0040 + +#define OMAP2420_CTRL_BASE L4_24XX_BASE +#define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) +#define OMAP2420_PRCM_BASE (L4_24XX_BASE + 0x8000) +#define OMAP2420_CM_BASE (L4_24XX_BASE + 0x8000) +#define OMAP2420_PRM_BASE OMAP2420_CM_BASE +#define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000) +#define OMAP2420_SMS_BASE 0x68008000 + +#define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000) +#define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000) +#define OMAP2430_CM_BASE (L4_WK_243X_BASE + 0x6000) +#define OMAP2430_PRM_BASE OMAP2430_CM_BASE + +#define OMAP243X_SMS_BASE 0x6C000000 +#define OMAP243X_SDRC_BASE 0x6D000000 +#define OMAP243X_GPMC_BASE 0x6E000000 +#define OMAP243X_SCM_BASE (L4_WK_243X_BASE + 0x2000) +#define OMAP243X_CTRL_BASE OMAP243X_SCM_BASE +#define OMAP243X_HS_BASE (L4_24XX_BASE + 0x000ac000) + +/* DSP SS */ +#define OMAP2420_DSP_BASE 0x58000000 +#define OMAP2420_DSP_MEM_BASE (OMAP2420_DSP_BASE + 0x0) +#define OMAP2420_DSP_IPI_BASE (OMAP2420_DSP_BASE + 0x1000000) +#define OMAP2420_DSP_MMU_BASE (OMAP2420_DSP_BASE + 0x2000000) + +#define OMAP243X_DSP_BASE 0x5C000000 +#define OMAP243X_DSP_MEM_BASE (OMAP243X_DSP_BASE + 0x0) +#define OMAP243X_DSP_MMU_BASE (OMAP243X_DSP_BASE + 0x1000000) + +/* Mailbox */ +#define OMAP24XX_MAILBOX_BASE (L4_24XX_BASE + 0x94000) + +/* Camera */ +#define OMAP24XX_CAMERA_BASE (L4_24XX_BASE + 0x52000) + +/* Security */ +#define OMAP24XX_SEC_BASE (L4_24XX_BASE + 0xA0000) +#define OMAP24XX_SEC_RNG_BASE (OMAP24XX_SEC_BASE + 0x0000) +#define OMAP24XX_SEC_DES_BASE (OMAP24XX_SEC_BASE + 0x2000) +#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000) +#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000) +#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000) + +#if defined(CONFIG_ARCH_OMAP2420) + +#define OMAP2_32KSYNCT_BASE OMAP2420_32KSYNCT_BASE +#define OMAP2_PRCM_BASE OMAP2420_PRCM_BASE +#define OMAP2_CM_BASE OMAP2420_CM_BASE +#define OMAP2_PRM_BASE OMAP2420_PRM_BASE +#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) + +#elif defined(CONFIG_ARCH_OMAP2430) + +#define OMAP2_32KSYNCT_BASE OMAP2430_32KSYNCT_BASE +#define OMAP2_PRCM_BASE OMAP2430_PRCM_BASE +#define OMAP2_CM_BASE OMAP2430_CM_BASE +#define OMAP2_PRM_BASE OMAP2430_PRM_BASE +#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) + +#endif + +#endif /* __ASM_ARCH_OMAP24XX_H */ + diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h new file mode 100644 index 000000000000..8e0479fff05a --- /dev/null +++ b/arch/arm/plat-omap/include/mach/omap34xx.h @@ -0,0 +1,72 @@ +/* + * arch/arm/plat-omap/include/mach/omap34xx.h + * + * This file contains the processor specific definitions of the TI OMAP34XX. + * + * Copyright (C) 2007 Texas Instruments. + * Copyright (C) 2007 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_OMAP34XX_H +#define __ASM_ARCH_OMAP34XX_H + +/* + * Please place only base defines here and put the rest in device + * specific headers. + */ + +#define L4_34XX_BASE 0x48000000 +#define L4_WK_34XX_BASE 0x48300000 +#define L4_WK_OMAP_BASE L4_WK_34XX_BASE +#define L4_PER_34XX_BASE 0x49000000 +#define L4_PER_OMAP_BASE L4_PER_34XX_BASE +#define L4_EMU_34XX_BASE 0x54000000 +#define L4_EMU_BASE L4_EMU_34XX_BASE +#define L3_34XX_BASE 0x68000000 +#define L3_OMAP_BASE L3_34XX_BASE + +#define OMAP3430_32KSYNCT_BASE 0x48320000 +#define OMAP3430_CM_BASE 0x48004800 +#define OMAP3430_PRM_BASE 0x48306800 +#define OMAP343X_SMS_BASE 0x6C000000 +#define OMAP343X_SDRC_BASE 0x6D000000 +#define OMAP34XX_GPMC_BASE 0x6E000000 +#define OMAP343X_SCM_BASE 0x48002000 +#define OMAP343X_CTRL_BASE OMAP343X_SCM_BASE + +#define OMAP34XX_IC_BASE 0x48200000 +#define OMAP34XX_IVA_INTC_BASE 0x40000000 +#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000) +#define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000) +#define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000) + + +#if defined(CONFIG_ARCH_OMAP3430) + +#define OMAP2_32KSYNCT_BASE OMAP3430_32KSYNCT_BASE +#define OMAP2_CM_BASE OMAP3430_CM_BASE +#define OMAP2_PRM_BASE OMAP3430_PRM_BASE +#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE) + +#endif + +#define OMAP34XX_DSP_BASE 0x58000000 +#define OMAP34XX_DSP_MEM_BASE (OMAP34XX_DSP_BASE + 0x0) +#define OMAP34XX_DSP_IPI_BASE (OMAP34XX_DSP_BASE + 0x1000000) +#define OMAP34XX_DSP_MMU_BASE (OMAP34XX_DSP_BASE + 0x2000000) +#endif /* __ASM_ARCH_OMAP34XX_H */ + diff --git a/arch/arm/plat-omap/include/mach/omap730.h b/arch/arm/plat-omap/include/mach/omap730.h new file mode 100644 index 000000000000..14272bc1a6fd --- /dev/null +++ b/arch/arm/plat-omap/include/mach/omap730.h @@ -0,0 +1,102 @@ +/* arch/arm/plat-omap/include/mach/omap730.h + * + * Hardware definitions for TI OMAP730 processor. + * + * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP730_H +#define __ASM_ARCH_OMAP730_H + +/* + * ---------------------------------------------------------------------------- + * Base addresses + * ---------------------------------------------------------------------------- + */ + +/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ + +#define OMAP730_DSP_BASE 0xE0000000 +#define OMAP730_DSP_SIZE 0x50000 +#define OMAP730_DSP_START 0xE0000000 + +#define OMAP730_DSPREG_BASE 0xE1000000 +#define OMAP730_DSPREG_SIZE SZ_128K +#define OMAP730_DSPREG_START 0xE1000000 + +/* + * ---------------------------------------------------------------------------- + * OMAP730 specific configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP730_CONFIG_BASE 0xfffe1000 +#define OMAP730_IO_CONF_0 0xfffe1070 +#define OMAP730_IO_CONF_1 0xfffe1074 +#define OMAP730_IO_CONF_2 0xfffe1078 +#define OMAP730_IO_CONF_3 0xfffe107c +#define OMAP730_IO_CONF_4 0xfffe1080 +#define OMAP730_IO_CONF_5 0xfffe1084 +#define OMAP730_IO_CONF_6 0xfffe1088 +#define OMAP730_IO_CONF_7 0xfffe108c +#define OMAP730_IO_CONF_8 0xfffe1090 +#define OMAP730_IO_CONF_9 0xfffe1094 +#define OMAP730_IO_CONF_10 0xfffe1098 +#define OMAP730_IO_CONF_11 0xfffe109c +#define OMAP730_IO_CONF_12 0xfffe10a0 +#define OMAP730_IO_CONF_13 0xfffe10a4 + +#define OMAP730_MODE_1 0xfffe1010 +#define OMAP730_MODE_2 0xfffe1014 + +/* CSMI specials: in terms of base + offset */ +#define OMAP730_MODE2_OFFSET 0x14 + +/* + * ---------------------------------------------------------------------------- + * OMAP730 traffic controller configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP730_FLASH_CFG_0 0xfffecc10 +#define OMAP730_FLASH_ACFG_0 0xfffecc50 +#define OMAP730_FLASH_CFG_1 0xfffecc14 +#define OMAP730_FLASH_ACFG_1 0xfffecc54 + +/* + * ---------------------------------------------------------------------------- + * OMAP730 DSP control registers + * ---------------------------------------------------------------------------- + */ +#define OMAP730_ICR_BASE 0xfffbb800 +#define OMAP730_DSP_M_CTL 0xfffbb804 +#define OMAP730_DSP_MMU_BASE 0xfffed200 + +/* + * ---------------------------------------------------------------------------- + * OMAP730 PCC_UPLD configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP730_PCC_UPLD_CTRL_BASE (0xfffe0900) +#define OMAP730_PCC_UPLD_CTRL (OMAP730_PCC_UPLD_CTRL_BASE + 0x00) + +#endif /* __ASM_ARCH_OMAP730_H */ + diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h new file mode 100644 index 000000000000..cae037d13079 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/omapfb.h @@ -0,0 +1,395 @@ +/* + * File: arch/arm/plat-omap/include/mach/omapfb.h + * + * Framebuffer driver for TI OMAP boards + * + * Copyright (C) 2004 Nokia Corporation + * Author: Imre Deak <imre.deak@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __OMAPFB_H +#define __OMAPFB_H + +#include <asm/ioctl.h> +#include <asm/types.h> + +/* IOCTL commands. */ + +#define OMAP_IOW(num, dtype) _IOW('O', num, dtype) +#define OMAP_IOR(num, dtype) _IOR('O', num, dtype) +#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype) +#define OMAP_IO(num) _IO('O', num) + +#define OMAPFB_MIRROR OMAP_IOW(31, int) +#define OMAPFB_SYNC_GFX OMAP_IO(37) +#define OMAPFB_VSYNC OMAP_IO(38) +#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int) +#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps) +#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int) +#define OMAPFB_LCD_TEST OMAP_IOW(45, int) +#define OMAPFB_CTRL_TEST OMAP_IOW(46, int) +#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old) +#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key) +#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key) +#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info) +#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info) +#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window) +#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info) +#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info) + +#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff +#define OMAPFB_CAPS_LCDC_MASK 0x00fff000 +#define OMAPFB_CAPS_PANEL_MASK 0xff000000 + +#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000 +#define OMAPFB_CAPS_TEARSYNC 0x00002000 +#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000 +#define OMAPFB_CAPS_PLANE_SCALE 0x00008000 +#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000 +#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000 +#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000 +#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 + +/* Values from DSP must map to lower 16-bits */ +#define OMAPFB_FORMAT_MASK 0x00ff +#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100 +#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200 +#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400 +#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800 +#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000 + +#define OMAPFB_EVENT_READY 1 +#define OMAPFB_EVENT_DISABLED 2 + +#define OMAPFB_MEMTYPE_SDRAM 0 +#define OMAPFB_MEMTYPE_SRAM 1 +#define OMAPFB_MEMTYPE_MAX 1 + +enum omapfb_color_format { + OMAPFB_COLOR_RGB565 = 0, + OMAPFB_COLOR_YUV422, + OMAPFB_COLOR_YUV420, + OMAPFB_COLOR_CLUT_8BPP, + OMAPFB_COLOR_CLUT_4BPP, + OMAPFB_COLOR_CLUT_2BPP, + OMAPFB_COLOR_CLUT_1BPP, + OMAPFB_COLOR_RGB444, + OMAPFB_COLOR_YUY422, +}; + +struct omapfb_update_window { + __u32 x, y; + __u32 width, height; + __u32 format; + __u32 out_x, out_y; + __u32 out_width, out_height; + __u32 reserved[8]; +}; + +struct omapfb_update_window_old { + __u32 x, y; + __u32 width, height; + __u32 format; +}; + +enum omapfb_plane { + OMAPFB_PLANE_GFX = 0, + OMAPFB_PLANE_VID1, + OMAPFB_PLANE_VID2, +}; + +enum omapfb_channel_out { + OMAPFB_CHANNEL_OUT_LCD = 0, + OMAPFB_CHANNEL_OUT_DIGIT, +}; + +struct omapfb_plane_info { + __u32 pos_x; + __u32 pos_y; + __u8 enabled; + __u8 channel_out; + __u8 mirror; + __u8 reserved1; + __u32 out_width; + __u32 out_height; + __u32 reserved2[12]; +}; + +struct omapfb_mem_info { + __u32 size; + __u8 type; + __u8 reserved[3]; +}; + +struct omapfb_caps { + __u32 ctrl; + __u32 plane_color; + __u32 wnd_color; +}; + +enum omapfb_color_key_type { + OMAPFB_COLOR_KEY_DISABLED = 0, + OMAPFB_COLOR_KEY_GFX_DST, + OMAPFB_COLOR_KEY_VID_SRC, +}; + +struct omapfb_color_key { + __u8 channel_out; + __u32 background; + __u32 trans_key; + __u8 key_type; +}; + +enum omapfb_update_mode { + OMAPFB_UPDATE_DISABLED = 0, + OMAPFB_AUTO_UPDATE, + OMAPFB_MANUAL_UPDATE +}; + +#ifdef __KERNEL__ + +#include <linux/completion.h> +#include <linux/interrupt.h> +#include <linux/fb.h> +#include <linux/mutex.h> + +#include <mach/board.h> + +#define OMAP_LCDC_INV_VSYNC 0x0001 +#define OMAP_LCDC_INV_HSYNC 0x0002 +#define OMAP_LCDC_INV_PIX_CLOCK 0x0004 +#define OMAP_LCDC_INV_OUTPUT_EN 0x0008 +#define OMAP_LCDC_HSVS_RISING_EDGE 0x0010 +#define OMAP_LCDC_HSVS_OPPOSITE 0x0020 + +#define OMAP_LCDC_SIGNAL_MASK 0x003f + +#define OMAP_LCDC_PANEL_TFT 0x0100 + +#define OMAPFB_PLANE_XRES_MIN 8 +#define OMAPFB_PLANE_YRES_MIN 8 + +#ifdef CONFIG_ARCH_OMAP1 +#define OMAPFB_PLANE_NUM 1 +#else +#define OMAPFB_PLANE_NUM 3 +#endif + +struct omapfb_device; + +struct lcd_panel { + const char *name; + int config; /* TFT/STN, signal inversion */ + int bpp; /* Pixel format in fb mem */ + int data_lines; /* Lines on LCD HW interface */ + + int x_res, y_res; + int pixel_clock; /* In kHz */ + int hsw; /* Horizontal synchronization + pulse width */ + int hfp; /* Horizontal front porch */ + int hbp; /* Horizontal back porch */ + int vsw; /* Vertical synchronization + pulse width */ + int vfp; /* Vertical front porch */ + int vbp; /* Vertical back porch */ + int acb; /* ac-bias pin frequency */ + int pcd; /* pixel clock divider. + Obsolete use pixel_clock instead */ + + int (*init) (struct lcd_panel *panel, + struct omapfb_device *fbdev); + void (*cleanup) (struct lcd_panel *panel); + int (*enable) (struct lcd_panel *panel); + void (*disable) (struct lcd_panel *panel); + unsigned long (*get_caps) (struct lcd_panel *panel); + int (*set_bklight_level)(struct lcd_panel *panel, + unsigned int level); + unsigned int (*get_bklight_level)(struct lcd_panel *panel); + unsigned int (*get_bklight_max) (struct lcd_panel *panel); + int (*run_test) (struct lcd_panel *panel, int test_num); +}; + +struct extif_timings { + int cs_on_time; + int cs_off_time; + int we_on_time; + int we_off_time; + int re_on_time; + int re_off_time; + int we_cycle_time; + int re_cycle_time; + int cs_pulse_width; + int access_time; + + int clk_div; + + u32 tim[5]; /* set by extif->convert_timings */ + + int converted; +}; + +struct lcd_ctrl_extif { + int (*init) (struct omapfb_device *fbdev); + void (*cleanup) (void); + void (*get_clk_info) (u32 *clk_period, u32 *max_clk_div); + unsigned long (*get_max_tx_rate)(void); + int (*convert_timings) (struct extif_timings *timings); + void (*set_timings) (const struct extif_timings *timings); + void (*set_bits_per_cycle)(int bpc); + void (*write_command) (const void *buf, unsigned int len); + void (*read_data) (void *buf, unsigned int len); + void (*write_data) (const void *buf, unsigned int len); + void (*transfer_area) (int width, int height, + void (callback)(void * data), void *data); + int (*setup_tearsync) (unsigned pin_cnt, + unsigned hs_pulse_time, unsigned vs_pulse_time, + int hs_pol_inv, int vs_pol_inv, int div); + int (*enable_tearsync) (int enable, unsigned line); + + unsigned long max_transmit_size; +}; + +struct omapfb_notifier_block { + struct notifier_block nb; + void *data; + int plane_idx; +}; + +typedef int (*omapfb_notifier_callback_t)(struct notifier_block *, + unsigned long event, + void *fbi); + +struct omapfb_mem_region { + dma_addr_t paddr; + void *vaddr; + unsigned long size; + u8 type; /* OMAPFB_PLANE_MEM_* */ + unsigned alloc:1; /* allocated by the driver */ + unsigned map:1; /* kernel mapped by the driver */ +}; + +struct omapfb_mem_desc { + int region_cnt; + struct omapfb_mem_region region[OMAPFB_PLANE_NUM]; +}; + +struct lcd_ctrl { + const char *name; + void *data; + + int (*init) (struct omapfb_device *fbdev, + int ext_mode, + struct omapfb_mem_desc *req_md); + void (*cleanup) (void); + void (*bind_client) (struct omapfb_notifier_block *nb); + void (*get_caps) (int plane, struct omapfb_caps *caps); + int (*set_update_mode)(enum omapfb_update_mode mode); + enum omapfb_update_mode (*get_update_mode)(void); + int (*setup_plane) (int plane, int channel_out, + unsigned long offset, + int screen_width, + int pos_x, int pos_y, int width, + int height, int color_mode); + int (*setup_mem) (int plane, size_t size, + int mem_type, unsigned long *paddr); + int (*mmap) (struct fb_info *info, + struct vm_area_struct *vma); + int (*set_scale) (int plane, + int orig_width, int orig_height, + int out_width, int out_height); + int (*enable_plane) (int plane, int enable); + int (*update_window) (struct fb_info *fbi, + struct omapfb_update_window *win, + void (*callback)(void *), + void *callback_data); + void (*sync) (void); + void (*suspend) (void); + void (*resume) (void); + int (*run_test) (int test_num); + int (*setcolreg) (u_int regno, u16 red, u16 green, + u16 blue, u16 transp, + int update_hw_mem); + int (*set_color_key) (struct omapfb_color_key *ck); + int (*get_color_key) (struct omapfb_color_key *ck); +}; + +enum omapfb_state { + OMAPFB_DISABLED = 0, + OMAPFB_SUSPENDED= 99, + OMAPFB_ACTIVE = 100 +}; + +struct omapfb_plane_struct { + int idx; + struct omapfb_plane_info info; + enum omapfb_color_format color_mode; + struct omapfb_device *fbdev; +}; + +struct omapfb_device { + int state; + int ext_lcdc; /* Using external + LCD controller */ + struct mutex rqueue_mutex; + + int palette_size; + u32 pseudo_palette[17]; + + struct lcd_panel *panel; /* LCD panel */ + struct lcd_ctrl *ctrl; /* LCD controller */ + struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */ + struct lcd_ctrl_extif *ext_if; /* LCD ctrl external + interface */ + struct device *dev; + struct fb_var_screeninfo new_var; /* for mode changes */ + + struct omapfb_mem_desc mem_desc; + struct fb_info *fb_info[OMAPFB_PLANE_NUM]; +}; + +struct omapfb_platform_data { + struct omap_lcd_config lcd; + struct omapfb_mem_desc mem_desc; + void *ctrl_platform_data; +}; + +#ifdef CONFIG_ARCH_OMAP1 +extern struct lcd_ctrl omap1_lcd_ctrl; +#else +extern struct lcd_ctrl omap2_disp_ctrl; +#endif + +extern void omapfb_register_panel(struct lcd_panel *panel); +extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval); +extern void omapfb_notify_clients(struct omapfb_device *fbdev, + unsigned long event); +extern int omapfb_register_client(struct omapfb_notifier_block *nb, + omapfb_notifier_callback_t callback, + void *callback_data); +extern int omapfb_unregister_client(struct omapfb_notifier_block *nb); +extern int omapfb_update_window_async(struct fb_info *fbi, + struct omapfb_update_window *win, + void (*callback)(void *), + void *callback_data); + +/* in arch/arm/plat-omap/fb.c */ +extern void omapfb_set_ctrl_platform_data(void *pdata); + +#endif /* __KERNEL__ */ + +#endif /* __OMAPFB_H */ diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h new file mode 100644 index 000000000000..d57f20226b28 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/onenand.h @@ -0,0 +1,21 @@ +/* + * arch/arm/plat-omap/include/mach/onenand.h + * + * Copyright (C) 2006 Nokia Corporation + * Author: Juha Yrjola + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/mtd/partitions.h> + +struct omap_onenand_platform_data { + int cs; + int gpio_irq; + struct mtd_partition *parts; + int nr_parts; + int (*onenand_setup)(void __iomem *); + int dma_channel; +}; diff --git a/arch/arm/plat-omap/include/mach/param.h b/arch/arm/plat-omap/include/mach/param.h new file mode 100644 index 000000000000..1eb4dc326979 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/param.h @@ -0,0 +1,8 @@ +/* + * arch/arm/plat-omap/include/mach/param.h + * + */ + +#ifdef CONFIG_OMAP_32K_TIMER_HZ +#define HZ CONFIG_OMAP_32K_TIMER_HZ +#endif diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h new file mode 100644 index 000000000000..bfa09325a5ff --- /dev/null +++ b/arch/arm/plat-omap/include/mach/pm.h @@ -0,0 +1,356 @@ +/* + * arch/arm/plat-omap/include/mach/pm.h + * + * Header file for OMAP Power Management Routines + * + * Author: MontaVista Software, Inc. + * support@mvista.com + * + * Copyright 2002 MontaVista Software Inc. + * + * Cleanup 2004 for Linux 2.6 by Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP_PM_H +#define __ASM_ARCH_OMAP_PM_H + +/* + * ---------------------------------------------------------------------------- + * Register and offset definitions to be used in PM assembler code + * ---------------------------------------------------------------------------- + */ +#define CLKGEN_REG_ASM_BASE io_p2v(0xfffece00) +#define ARM_IDLECT1_ASM_OFFSET 0x04 +#define ARM_IDLECT2_ASM_OFFSET 0x08 + +#define TCMIF_ASM_BASE io_p2v(0xfffecc00) +#define EMIFS_CONFIG_ASM_OFFSET 0x0c +#define EMIFF_SDRAM_CONFIG_ASM_OFFSET 0x20 + +/* + * ---------------------------------------------------------------------------- + * Power management bitmasks + * ---------------------------------------------------------------------------- + */ +#define IDLE_WAIT_CYCLES 0x00000fff +#define PERIPHERAL_ENABLE 0x2 + +#define SELF_REFRESH_MODE 0x0c000001 +#define IDLE_EMIFS_REQUEST 0xc +#define MODEM_32K_EN 0x1 +#define PER_EN 0x1 + +#define CPU_SUSPEND_SIZE 200 +#define ULPD_LOW_PWR_EN 0x0001 +#define ULPD_DEEP_SLEEP_TRANSITION_EN 0x0010 +#define ULPD_SETUP_ANALOG_CELL_3_VAL 0 +#define ULPD_POWER_CTRL_REG_VAL 0x0219 + +#define DSP_IDLE_DELAY 10 +#define DSP_IDLE 0x0040 +#define DSP_RST 0x0004 +#define DSP_ENABLE 0x0002 +#define SUFFICIENT_DSP_RESET_TIME 1000 +#define DEFAULT_MPUI_CONFIG 0x05cf +#define ENABLE_XORCLK 0x2 +#define DSP_CLOCK_ENABLE 0x2000 +#define DSP_IDLE_MODE 0x2 +#define TC_IDLE_REQUEST (0x0000000c) + +#define IRQ_LEVEL2 (1<<0) +#define IRQ_KEYBOARD (1<<1) +#define IRQ_UART2 (1<<15) + +#define PDE_BIT 0x08 +#define PWD_EN_BIT 0x04 +#define EN_PERCK_BIT 0x04 + +#define OMAP1510_DEEP_SLEEP_REQUEST 0x0ec7 +#define OMAP1510_BIG_SLEEP_REQUEST 0x0cc5 +#define OMAP1510_IDLE_LOOP_REQUEST 0x0c00 +#define OMAP1510_IDLE_CLOCK_DOMAINS 0x2 + +/* Both big sleep and deep sleep use same values. Difference is in ULPD. */ +#define OMAP1610_IDLECT1_SLEEP_VAL 0x13c7 +#define OMAP1610_IDLECT2_SLEEP_VAL 0x09c7 +#define OMAP1610_IDLECT3_VAL 0x3f +#define OMAP1610_IDLECT3_SLEEP_ORMASK 0x2c +#define OMAP1610_IDLECT3 0xfffece24 +#define OMAP1610_IDLE_LOOP_REQUEST 0x0400 + +#define OMAP730_IDLECT1_SLEEP_VAL 0x16c7 +#define OMAP730_IDLECT2_SLEEP_VAL 0x09c7 +#define OMAP730_IDLECT3_VAL 0x3f +#define OMAP730_IDLECT3 0xfffece24 +#define OMAP730_IDLE_LOOP_REQUEST 0x0C00 + +#if !defined(CONFIG_ARCH_OMAP730) && \ + !defined(CONFIG_ARCH_OMAP15XX) && \ + !defined(CONFIG_ARCH_OMAP16XX) && \ + !defined(CONFIG_ARCH_OMAP24XX) +#error "Power management for this processor not implemented yet" +#endif + +#ifndef __ASSEMBLER__ + +#include <linux/clk.h> + +extern void prevent_idle_sleep(void); +extern void allow_idle_sleep(void); + +/** + * clk_deny_idle - Prevents the clock from being idled during MPU idle + * @clk: clock signal handle + */ +void clk_deny_idle(struct clk *clk); + +/** + * clk_allow_idle - Counters previous clk_deny_idle + * @clk: clock signal handle + */ +void clk_deny_idle(struct clk *clk); + +extern void omap_pm_idle(void); +extern void omap_pm_suspend(void); +extern void omap730_cpu_suspend(unsigned short, unsigned short); +extern void omap1510_cpu_suspend(unsigned short, unsigned short); +extern void omap1610_cpu_suspend(unsigned short, unsigned short); +extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision); +extern void omap730_idle_loop_suspend(void); +extern void omap1510_idle_loop_suspend(void); +extern void omap1610_idle_loop_suspend(void); +extern void omap24xx_idle_loop_suspend(void); + +extern unsigned int omap730_cpu_suspend_sz; +extern unsigned int omap1510_cpu_suspend_sz; +extern unsigned int omap1610_cpu_suspend_sz; +extern unsigned int omap24xx_cpu_suspend_sz; +extern unsigned int omap730_idle_loop_suspend_sz; +extern unsigned int omap1510_idle_loop_suspend_sz; +extern unsigned int omap1610_idle_loop_suspend_sz; +extern unsigned int omap24xx_idle_loop_suspend_sz; + +#ifdef CONFIG_OMAP_SERIAL_WAKE +extern void omap_serial_wake_trigger(int enable); +#else +#define omap_serial_wakeup_init() {} +#define omap_serial_wake_trigger(x) {} +#endif /* CONFIG_OMAP_SERIAL_WAKE */ + +#define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x) +#define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x)) +#define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] + +#define DSP_SAVE(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] = __raw_readw(x) +#define DSP_RESTORE(x) __raw_writew((dsp_sleep_save[DSP_SLEEP_SAVE_##x]), (x)) +#define DSP_SHOW(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] + +#define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x) +#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x)) +#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] + +#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x) +#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x)) +#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] + +#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x) +#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x)) +#define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] + +#define MPUI1610_SAVE(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] = omap_readl(x) +#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x)) +#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] + +#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x +#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] +#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] + +/* + * List of global OMAP registers to preserve. + * More ones like CP and general purpose register values are preserved + * with the stack pointer in sleep.S. + */ + +enum arm_save_state { + ARM_SLEEP_SAVE_START = 0, + /* + * MPU control registers 32 bits + */ + ARM_SLEEP_SAVE_ARM_CKCTL, + ARM_SLEEP_SAVE_ARM_IDLECT1, + ARM_SLEEP_SAVE_ARM_IDLECT2, + ARM_SLEEP_SAVE_ARM_IDLECT3, + ARM_SLEEP_SAVE_ARM_EWUPCT, + ARM_SLEEP_SAVE_ARM_RSTCT1, + ARM_SLEEP_SAVE_ARM_RSTCT2, + ARM_SLEEP_SAVE_ARM_SYSST, + ARM_SLEEP_SAVE_SIZE +}; + +enum dsp_save_state { + DSP_SLEEP_SAVE_START = 0, + /* + * DSP registers 16 bits + */ + DSP_SLEEP_SAVE_DSP_IDLECT2, + DSP_SLEEP_SAVE_SIZE +}; + +enum ulpd_save_state { + ULPD_SLEEP_SAVE_START = 0, + /* + * ULPD registers 16 bits + */ + ULPD_SLEEP_SAVE_ULPD_IT_STATUS, + ULPD_SLEEP_SAVE_ULPD_CLOCK_CTRL, + ULPD_SLEEP_SAVE_ULPD_SOFT_REQ, + ULPD_SLEEP_SAVE_ULPD_STATUS_REQ, + ULPD_SLEEP_SAVE_ULPD_DPLL_CTRL, + ULPD_SLEEP_SAVE_ULPD_POWER_CTRL, + ULPD_SLEEP_SAVE_SIZE +}; + +enum mpui1510_save_state { + MPUI1510_SLEEP_SAVE_START = 0, + /* + * MPUI registers 32 bits + */ + MPUI1510_SLEEP_SAVE_MPUI_CTRL, + MPUI1510_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, + MPUI1510_SLEEP_SAVE_MPUI_DSP_API_CONFIG, + MPUI1510_SLEEP_SAVE_MPUI_DSP_STATUS, + MPUI1510_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, + MPUI1510_SLEEP_SAVE_EMIFS_CONFIG, + MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR, + MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR, +#if defined(CONFIG_ARCH_OMAP15XX) + MPUI1510_SLEEP_SAVE_SIZE +#else + MPUI1510_SLEEP_SAVE_SIZE = 0 +#endif +}; + +enum mpui730_save_state { + MPUI730_SLEEP_SAVE_START = 0, + /* + * MPUI registers 32 bits + */ + MPUI730_SLEEP_SAVE_MPUI_CTRL, + MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, + MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG, + MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS, + MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, + MPUI730_SLEEP_SAVE_EMIFS_CONFIG, + MPUI730_SLEEP_SAVE_OMAP_IH1_MIR, + MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR, + MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR, +#if defined(CONFIG_ARCH_OMAP730) + MPUI730_SLEEP_SAVE_SIZE +#else + MPUI730_SLEEP_SAVE_SIZE = 0 +#endif +}; + +enum mpui1610_save_state { + MPUI1610_SLEEP_SAVE_START = 0, + /* + * MPUI registers 32 bits + */ + MPUI1610_SLEEP_SAVE_MPUI_CTRL, + MPUI1610_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, + MPUI1610_SLEEP_SAVE_MPUI_DSP_API_CONFIG, + MPUI1610_SLEEP_SAVE_MPUI_DSP_STATUS, + MPUI1610_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, + MPUI1610_SLEEP_SAVE_EMIFS_CONFIG, + MPUI1610_SLEEP_SAVE_OMAP_IH1_MIR, + MPUI1610_SLEEP_SAVE_OMAP_IH2_0_MIR, + MPUI1610_SLEEP_SAVE_OMAP_IH2_1_MIR, + MPUI1610_SLEEP_SAVE_OMAP_IH2_2_MIR, + MPUI1610_SLEEP_SAVE_OMAP_IH2_3_MIR, +#if defined(CONFIG_ARCH_OMAP16XX) + MPUI1610_SLEEP_SAVE_SIZE +#else + MPUI1610_SLEEP_SAVE_SIZE = 0 +#endif +}; + +enum omap24xx_save_state { + OMAP24XX_SLEEP_SAVE_START = 0, + OMAP24XX_SLEEP_SAVE_INTC_MIR0, + OMAP24XX_SLEEP_SAVE_INTC_MIR1, + OMAP24XX_SLEEP_SAVE_INTC_MIR2, + + OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU, + OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE, + OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX, + OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP, + OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM, + + OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU, + OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE, + OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX, + OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP, + OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM, + + OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE, + OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE, + OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE, + OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE, + OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX, + OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP, + OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN, + OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP, + OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM, + + OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE, + OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE, + OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE, + OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE, + OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP, + OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL, + OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP, + OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM, + + OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE, + OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE, + OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE, + OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE, + OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE, + OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE, + OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1, + OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1, + OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1, + OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1, + OMAP24XX_SLEEP_SAVE_GPIO3_OE, + OMAP24XX_SLEEP_SAVE_GPIO4_OE, + OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT, + OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT, + OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2, + OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX, + OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX, + OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0, + OMAP24XX_SLEEP_SAVE_SIZE +}; + +#endif /* ASSEMBLER */ +#endif /* __ASM_ARCH_OMAP_PM_H */ diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h new file mode 100644 index 000000000000..56eba0fd6f6a --- /dev/null +++ b/arch/arm/plat-omap/include/mach/prcm.h @@ -0,0 +1,33 @@ +/* + * arch/arm/plat-omap/include/mach/prcm.h + * + * Access definations for use in OMAP24XX clock and power management + * + * Copyright (C) 2005 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_ARCH_DPM_PRCM_H +#define __ASM_ARM_ARCH_DPM_PRCM_H + +u32 omap_prcm_get_reset_sources(void); + +#endif + + + + + diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h new file mode 100644 index 000000000000..787b7acec546 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/sdrc.h @@ -0,0 +1,75 @@ +#ifndef ____ASM_ARCH_SDRC_H +#define ____ASM_ARCH_SDRC_H + +/* + * OMAP2/3 SDRC/SMS register definitions + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Copyright (C) 2007 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <mach/io.h> + +/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ + +#define SDRC_SYSCONFIG 0x010 +#define SDRC_DLLA_CTRL 0x060 +#define SDRC_DLLA_STATUS 0x064 +#define SDRC_DLLB_CTRL 0x068 +#define SDRC_DLLB_STATUS 0x06C +#define SDRC_POWER 0x070 +#define SDRC_MR_0 0x084 +#define SDRC_RFR_CTRL_0 0x0a4 + +/* + * These values represent the number of memory clock cycles between + * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 + * rows per device, and include a subtraction of a 50 cycle window in the + * event that the autorefresh command is delayed due to other SDRC activity. + * The '| 1' sets the ARE field to send one autorefresh when the autorefresh + * counter reaches 0. + * + * These represent optimal values for common parts, it won't work for all. + * As long as you scale down, most parameters are still work, they just + * become sub-optimal. The RFR value goes in the opposite direction. If you + * don't adjust it down as your clock period increases the refresh interval + * will not be met. Setting all parameters for complete worst case may work, + * but may cut memory performance by 2x. Due to errata the DLLs need to be + * unlocked and their value needs run time calibration. A dynamic call is + * need for that as no single right value exists acorss production samples. + * + * Only the FULL speed values are given. Current code is such that rate + * changes must be made at DPLLoutx2. The actual value adjustment for low + * frequency operation will be handled by omap_set_performance() + * + * By having the boot loader boot up in the fastest L4 speed available likely + * will result in something which you can switch between. + */ +#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1) +#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) +#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) +#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ +#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ + + +/* + * SMS register access + */ + + +#define OMAP242X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg) +#define OMAP243X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg) +#define OMAP343X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg) + +/* SMS register offsets - read/write with sms_{read,write}_reg() */ + +#define SMS_SYSCONFIG 0x010 +/* REVISIT: fill in other SMS registers here */ + +#endif diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h new file mode 100644 index 000000000000..cc6bfa51ccb5 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/serial.h @@ -0,0 +1,37 @@ +/* + * arch/arm/plat-omap/include/mach/serial.h + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_SERIAL_H +#define __ASM_ARCH_SERIAL_H + +#if defined(CONFIG_ARCH_OMAP1) +/* OMAP1 serial ports */ +#define OMAP_UART1_BASE 0xfffb0000 +#define OMAP_UART2_BASE 0xfffb0800 +#define OMAP_UART3_BASE 0xfffb9800 +#elif defined(CONFIG_ARCH_OMAP2) +/* OMAP2 serial ports */ +#define OMAP_UART1_BASE 0x4806a000 +#define OMAP_UART2_BASE 0x4806c000 +#define OMAP_UART3_BASE 0x4806e000 +#endif + +#define OMAP_MAX_NR_PORTS 3 +#define OMAP1510_BASE_BAUD (12000000/16) +#define OMAP16XX_BASE_BAUD (48000000/16) + +#define is_omap_port(p) ({int __ret = 0; \ + if (p == IO_ADDRESS(OMAP_UART1_BASE) || \ + p == IO_ADDRESS(OMAP_UART2_BASE) || \ + p == IO_ADDRESS(OMAP_UART3_BASE)) \ + __ret = 1; \ + __ret; \ + }) + +#endif diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h new file mode 100644 index 000000000000..e09323449981 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/sram.h @@ -0,0 +1,56 @@ +/* + * arch/arm/plat-omap/include/mach/sram.h + * + * Interface for functions that need to be run in internal SRAM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_OMAP_SRAM_H +#define __ARCH_ARM_OMAP_SRAM_H + +extern int __init omap_sram_init(void); +extern void * omap_sram_push(void * start, unsigned long size); +extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); + +extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); + +/* Do not use these */ +extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long omap1_sram_reprogram_clock_sz; + +extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long omap24xx_sram_reprogram_clock_sz; + +extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern unsigned long omap242x_sram_ddr_init_sz; + +extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, + int bypass); +extern unsigned long omap242x_sram_set_prcm_sz; + +extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern unsigned long omap242x_sram_reprogram_sdrc_sz; + + +extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); +extern unsigned long omap243x_sram_ddr_init_sz; + +extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, + int bypass); +extern unsigned long omap243x_sram_set_prcm_sz; + +extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type); +extern unsigned long omap243x_sram_reprogram_sdrc_sz; + +#endif diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h new file mode 100644 index 000000000000..06a28c7b98de --- /dev/null +++ b/arch/arm/plat-omap/include/mach/system.h @@ -0,0 +1,49 @@ +/* + * Copied from arch/arm/mach-sa1100/include/mach/system.h + * Copyright (c) 1999 Nicolas Pitre <nico@cam.org> + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H +#include <linux/clk.h> + +#include <asm/mach-types.h> +#include <mach/hardware.h> + +#ifndef CONFIG_MACH_VOICEBLUE +#define voiceblue_reset() do {} while (0) +#endif + +extern void omap_prcm_arch_reset(char mode); + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void omap1_arch_reset(char mode) +{ + /* + * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 + * "Global Software Reset Affects Traffic Controller Frequency". + */ + if (cpu_is_omap5912()) { + omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), + DPLL_CTL); + omap_writew(0x8, ARM_RSTCT1); + } + + if (machine_is_voiceblue()) + voiceblue_reset(); + else + omap_writew(1, ARM_RSTCT1); +} + +static inline void arch_reset(char mode) +{ + if (!cpu_is_omap24xx()) + omap1_arch_reset(mode); + else + omap_prcm_arch_reset(mode); +} + +#endif diff --git a/arch/arm/plat-omap/include/mach/tc.h b/arch/arm/plat-omap/include/mach/tc.h new file mode 100644 index 000000000000..d2fcd789bb9a --- /dev/null +++ b/arch/arm/plat-omap/include/mach/tc.h @@ -0,0 +1,106 @@ +/* + * arch/arm/plat-omap/include/mach/tc.h + * + * OMAP Traffic Controller + * + * Copyright (C) 2004 Nokia Corporation + * Author: Imre Deak <imre.deak@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __ASM_ARCH_TC_H +#define __ASM_ARCH_TC_H + +#define TCMIF_BASE 0xfffecc00 +#define OMAP_TC_OCPT1_PRIOR (TCMIF_BASE + 0x00) +#define OMAP_TC_EMIFS_PRIOR (TCMIF_BASE + 0x04) +#define OMAP_TC_EMIFF_PRIOR (TCMIF_BASE + 0x08) +#define EMIFS_CONFIG (TCMIF_BASE + 0x0c) +#define EMIFS_CS0_CONFIG (TCMIF_BASE + 0x10) +#define EMIFS_CS1_CONFIG (TCMIF_BASE + 0x14) +#define EMIFS_CS2_CONFIG (TCMIF_BASE + 0x18) +#define EMIFS_CS3_CONFIG (TCMIF_BASE + 0x1c) +#define EMIFF_SDRAM_CONFIG (TCMIF_BASE + 0x20) +#define EMIFF_MRS (TCMIF_BASE + 0x24) +#define TC_TIMEOUT1 (TCMIF_BASE + 0x28) +#define TC_TIMEOUT2 (TCMIF_BASE + 0x2c) +#define TC_TIMEOUT3 (TCMIF_BASE + 0x30) +#define TC_ENDIANISM (TCMIF_BASE + 0x34) +#define EMIFF_SDRAM_CONFIG_2 (TCMIF_BASE + 0x3c) +#define EMIF_CFG_DYNAMIC_WS (TCMIF_BASE + 0x40) +#define EMIFS_ACS0 (TCMIF_BASE + 0x50) +#define EMIFS_ACS1 (TCMIF_BASE + 0x54) +#define EMIFS_ACS2 (TCMIF_BASE + 0x58) +#define EMIFS_ACS3 (TCMIF_BASE + 0x5c) +#define OMAP_TC_OCPT2_PRIOR (TCMIF_BASE + 0xd0) + +/* external EMIFS chipselect regions */ +#define OMAP_CS0_PHYS 0x00000000 +#define OMAP_CS0_SIZE SZ_64M + +#define OMAP_CS1_PHYS 0x04000000 +#define OMAP_CS1_SIZE SZ_64M + +#define OMAP_CS1A_PHYS OMAP_CS1_PHYS +#define OMAP_CS1A_SIZE SZ_32M + +#define OMAP_CS1B_PHYS (OMAP_CS1A_PHYS + OMAP_CS1A_SIZE) +#define OMAP_CS1B_SIZE SZ_32M + +#define OMAP_CS2_PHYS 0x08000000 +#define OMAP_CS2_SIZE SZ_64M + +#define OMAP_CS2A_PHYS OMAP_CS2_PHYS +#define OMAP_CS2A_SIZE SZ_32M + +#define OMAP_CS2B_PHYS (OMAP_CS2A_PHYS + OMAP_CS2A_SIZE) +#define OMAP_CS2B_SIZE SZ_32M + +#define OMAP_CS3_PHYS 0x0c000000 +#define OMAP_CS3_SIZE SZ_64M + +#ifndef __ASSEMBLER__ + +/* EMIF Slow Interface Configuration Register */ +#define OMAP_EMIFS_CONFIG_FR (1 << 4) +#define OMAP_EMIFS_CONFIG_PDE (1 << 3) +#define OMAP_EMIFS_CONFIG_PWD_EN (1 << 2) +#define OMAP_EMIFS_CONFIG_BM (1 << 1) +#define OMAP_EMIFS_CONFIG_WP (1 << 0) + +#define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n))) +#define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n))) + +/* Almost all documentation for chip and board memory maps assumes + * BM is clear. Most devel boards have a switch to control booting + * from NOR flash (using external chipselect 3) rather than mask ROM, + * which uses BM to interchange the physical CS0 and CS3 addresses. + */ +static inline u32 omap_cs0_phys(void) +{ + return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) + ? OMAP_CS3_PHYS : 0; +} + +static inline u32 omap_cs3_phys(void) +{ + return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) + ? 0 : OMAP_CS3_PHYS; +} + +#endif /* __ASSEMBLER__ */ + +#endif /* __ASM_ARCH_TC_H */ diff --git a/arch/arm/plat-omap/include/mach/timex.h b/arch/arm/plat-omap/include/mach/timex.h new file mode 100644 index 000000000000..6d35767bc48f --- /dev/null +++ b/arch/arm/plat-omap/include/mach/timex.h @@ -0,0 +1,41 @@ +/* + * arch/arm/plat-omap/include/mach/timex.h + * + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if !defined(__ASM_ARCH_OMAP_TIMEX_H) +#define __ASM_ARCH_OMAP_TIMEX_H + +/* + * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer, + * and that's why the CLOCK_TICK_RATE is not 32768. + */ +#ifdef CONFIG_OMAP_32K_TIMER +#define CLOCK_TICK_RATE (CONFIG_OMAP_32K_TIMER_HZ) +#else +#define CLOCK_TICK_RATE (HZ * 100000UL) +#endif + +#endif /* __ASM_ARCH_OMAP_TIMEX_H */ diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h new file mode 100644 index 000000000000..0814c5f210c3 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/uncompress.h @@ -0,0 +1,83 @@ +/* + * arch/arm/plat-omap/include/mach/uncompress.h + * + * Serial port stubs for kernel decompress status messages + * + * Initially based on: + * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * Rewritten by: + * Author: <source@mvista.com> + * 2004 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/types.h> +#include <linux/serial_reg.h> +#include <mach/serial.h> + +unsigned int system_rev; + +#define UART_OMAP_MDR1 0x08 /* mode definition register */ +#define OMAP_ID_730 0x355F +#define ID_MASK 0x7fff +#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0) +#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK + +static void putc(int c) +{ + volatile u8 * uart = 0; + int shift = 2; + +#ifdef CONFIG_MACH_OMAP_PALMTE + return; +#endif + +#ifdef CONFIG_ARCH_OMAP +#ifdef CONFIG_OMAP_LL_DEBUG_UART3 + uart = (volatile u8 *)(OMAP_UART3_BASE); +#elif defined(CONFIG_OMAP_LL_DEBUG_UART2) + uart = (volatile u8 *)(OMAP_UART2_BASE); +#else + uart = (volatile u8 *)(OMAP_UART1_BASE); +#endif + +#ifdef CONFIG_ARCH_OMAP1 + /* Determine which serial port to use */ + do { + /* MMU is not on, so cpu_is_omapXXXX() won't work here */ + unsigned int omap_id = omap_get_id(); + + if (omap_id == OMAP_ID_730) + shift = 0; + + if (check_port(uart, shift)) + break; + /* Silent boot if no serial ports are enabled. */ + return; + } while (0); +#endif /* CONFIG_ARCH_OMAP1 */ +#endif + + /* + * Now, xmit each character + */ + while (!(uart[UART_LSR << shift] & UART_LSR_THRE)) + barrier(); + uart[UART_TX << shift] = c; +} + +static inline void flush(void) +{ +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h new file mode 100644 index 000000000000..a56a610950c2 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/usb.h @@ -0,0 +1,141 @@ +// include/asm-arm/mach-omap/usb.h + +#ifndef __ASM_ARCH_OMAP_USB_H +#define __ASM_ARCH_OMAP_USB_H + +#include <mach/board.h> + +/*-------------------------------------------------------------------------*/ + +#define OMAP1_OTG_BASE 0xfffb0400 +#define OMAP1_UDC_BASE 0xfffb4000 +#define OMAP1_OHCI_BASE 0xfffba000 + +#define OMAP2_OHCI_BASE 0x4805e000 +#define OMAP2_UDC_BASE 0x4805e200 +#define OMAP2_OTG_BASE 0x4805e300 + +#ifdef CONFIG_ARCH_OMAP1 + +#define OTG_BASE OMAP1_OTG_BASE +#define UDC_BASE OMAP1_UDC_BASE +#define OMAP_OHCI_BASE OMAP1_OHCI_BASE + +#else + +#define OTG_BASE OMAP2_OTG_BASE +#define UDC_BASE OMAP2_UDC_BASE +#define OMAP_OHCI_BASE OMAP2_OHCI_BASE + +#endif + +/*-------------------------------------------------------------------------*/ + +/* + * OTG and transceiver registers, for OMAPs starting with ARM926 + */ +#define OTG_REV (OTG_BASE + 0x00) +#define OTG_SYSCON_1 (OTG_BASE + 0x04) +# define USB2_TRX_MODE(w) (((w)>>24)&0x07) +# define USB1_TRX_MODE(w) (((w)>>20)&0x07) +# define USB0_TRX_MODE(w) (((w)>>16)&0x07) +# define OTG_IDLE_EN (1 << 15) +# define HST_IDLE_EN (1 << 14) +# define DEV_IDLE_EN (1 << 13) +# define OTG_RESET_DONE (1 << 2) +# define OTG_SOFT_RESET (1 << 1) +#define OTG_SYSCON_2 (OTG_BASE + 0x08) +# define OTG_EN (1 << 31) +# define USBX_SYNCHRO (1 << 30) +# define OTG_MST16 (1 << 29) +# define SRP_GPDATA (1 << 28) +# define SRP_GPDVBUS (1 << 27) +# define SRP_GPUVBUS(w) (((w)>>24)&0x07) +# define A_WAIT_VRISE(w) (((w)>>20)&0x07) +# define B_ASE_BRST(w) (((w)>>16)&0x07) +# define SRP_DPW (1 << 14) +# define SRP_DATA (1 << 13) +# define SRP_VBUS (1 << 12) +# define OTG_PADEN (1 << 10) +# define HMC_PADEN (1 << 9) +# define UHOST_EN (1 << 8) +# define HMC_TLLSPEED (1 << 7) +# define HMC_TLLATTACH (1 << 6) +# define OTG_HMC(w) (((w)>>0)&0x3f) +#define OTG_CTRL (OTG_BASE + 0x0c) +# define OTG_USB2_EN (1 << 29) +# define OTG_USB2_DP (1 << 28) +# define OTG_USB2_DM (1 << 27) +# define OTG_USB1_EN (1 << 26) +# define OTG_USB1_DP (1 << 25) +# define OTG_USB1_DM (1 << 24) +# define OTG_USB0_EN (1 << 23) +# define OTG_USB0_DP (1 << 22) +# define OTG_USB0_DM (1 << 21) +# define OTG_ASESSVLD (1 << 20) +# define OTG_BSESSEND (1 << 19) +# define OTG_BSESSVLD (1 << 18) +# define OTG_VBUSVLD (1 << 17) +# define OTG_ID (1 << 16) +# define OTG_DRIVER_SEL (1 << 15) +# define OTG_A_SETB_HNPEN (1 << 12) +# define OTG_A_BUSREQ (1 << 11) +# define OTG_B_HNPEN (1 << 9) +# define OTG_B_BUSREQ (1 << 8) +# define OTG_BUSDROP (1 << 7) +# define OTG_PULLDOWN (1 << 5) +# define OTG_PULLUP (1 << 4) +# define OTG_DRV_VBUS (1 << 3) +# define OTG_PD_VBUS (1 << 2) +# define OTG_PU_VBUS (1 << 1) +# define OTG_PU_ID (1 << 0) +#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ +# define DRIVER_SWITCH (1 << 15) +# define A_VBUS_ERR (1 << 13) +# define A_REQ_TMROUT (1 << 12) +# define A_SRP_DETECT (1 << 11) +# define B_HNP_FAIL (1 << 10) +# define B_SRP_TMROUT (1 << 9) +# define B_SRP_DONE (1 << 8) +# define B_SRP_STARTED (1 << 7) +# define OPRT_CHG (1 << 0) +#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ + // same bits as in IRQ_EN +#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ +# define OTGVPD (1 << 14) +# define OTGVPU (1 << 13) +# define OTGPUID (1 << 12) +# define USB2VDR (1 << 10) +# define USB2PDEN (1 << 9) +# define USB2PUEN (1 << 8) +# define USB1VDR (1 << 6) +# define USB1PDEN (1 << 5) +# define USB1PUEN (1 << 4) +# define USB0VDR (1 << 2) +# define USB0PDEN (1 << 1) +# define USB0PUEN (1 << 0) +#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ +#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ + +/*-------------------------------------------------------------------------*/ + +/* OMAP1 */ +#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) +# define CONF_USB2_UNI_R (1 << 8) +# define CONF_USB1_UNI_R (1 << 7) +# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) +# define CONF_USB0_ISOLATE_R (1 << 3) +# define CONF_USB_PWRDN_DM_R (1 << 2) +# define CONF_USB_PWRDN_DP_R (1 << 1) + +/* OMAP2 */ +# define USB_UNIDIR 0x0 +# define USB_UNIDIR_TLL 0x1 +# define USB_BIDIR 0x2 +# define USB_BIDIR_TLL 0x3 +# define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2))) +# define USBT2TLL5PI (1 << 17) +# define USB0PUENACTLOI (1 << 16) +# define USBSTANDBYCTRL (1 << 15) + +#endif /* __ASM_ARCH_OMAP_USB_H */ diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h new file mode 100644 index 000000000000..dc104cd96197 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/vmalloc.h @@ -0,0 +1,21 @@ +/* + * arch/arm/plat-omap/include/mach/vmalloc.h + * + * Copyright (C) 2000 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define VMALLOC_END (PAGE_OFFSET + 0x10000000) + diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index ff1413eae0b8..1d7aec1a691a 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -31,7 +31,7 @@ #include <linux/err.h> #include <linux/delay.h> #include <asm/io.h> -#include <asm/arch/mailbox.h> +#include <mach/mailbox.h> #include "mailbox.h" static struct omap_mbox *mboxes; diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index c7f74064696c..d0844050f2d2 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -24,8 +24,8 @@ #include <linux/delay.h> #include <linux/io.h> -#include <asm/arch/dma.h> -#include <asm/arch/mcbsp.h> +#include <mach/dma.h> +#include <mach/mcbsp.h> static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT]; diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index 6f3f459731c8..847df208c46c 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -28,7 +28,7 @@ #include <asm/system.h> #include <asm/io.h> #include <linux/spinlock.h> -#include <asm/arch/mux.h> +#include <mach/mux.h> #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c index b5d307026c82..8bdbf979a257 100644 --- a/arch/arm/plat-omap/ocpi.c +++ b/arch/arm/plat-omap/ocpi.c @@ -33,7 +33,7 @@ #include <linux/clk.h> #include <asm/io.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #define OCPI_BASE 0xfffec320 #define OCPI_FAULT (OCPI_BASE + 0x00) diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 554ee58e1294..ac67eeb6ca6a 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -22,10 +22,10 @@ #include <asm/mach/map.h> -#include <asm/arch/sram.h> -#include <asm/arch/board.h> +#include <mach/sram.h> +#include <mach/board.h> -#include <asm/arch/control.h> +#include <mach/control.h> #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) # include "../mach-omap2/prm.h" diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 2699c16d4da0..777485e0636b 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -31,12 +31,12 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/system.h> -#include <asm/hardware.h> +#include <mach/hardware.h> -#include <asm/arch/control.h> -#include <asm/arch/mux.h> -#include <asm/arch/usb.h> -#include <asm/arch/board.h> +#include <mach/control.h> +#include <mach/mux.h> +#include <mach/usb.h> +#include <mach/board.h> #ifdef CONFIG_ARCH_OMAP1 |