diff options
Diffstat (limited to 'arch/arm/plat-omap')
29 files changed, 347 insertions, 763 deletions
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index ad95c7a5d009..dd36eba9506c 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -29,7 +29,7 @@ config ARCH_OMAP2PLUS select USE_OF select PROC_DEVICETREE if PROC_FS help - "Systems based on OMAP2, OMAP3 or OMAP4" + "Systems based on OMAP2, OMAP3, OMAP4 or OMAP5" endchoice @@ -45,31 +45,30 @@ config OMAP_DEBUG_LEDS depends on OMAP_DEBUG_DEVICES default y if LEDS_CLASS -config OMAP_SMARTREFLEX - bool "SmartReflex support" - depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM +config POWER_AVS_OMAP + bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2" + depends on POWER_AVS && (ARCH_OMAP3 || ARCH_OMAP4) && PM help - Say Y if you want to enable SmartReflex. - - SmartReflex can perform continuous dynamic voltage - scaling around the nominal operating point voltage - according to silicon characteristics and operating - conditions. Enabling SmartReflex reduces power - consumption. + Say Y to enable AVS(Adaptive Voltage Scaling) + support on OMAP containing the version 1 or + version 2 of the SmartReflex IP. + V1 is the 65nm version used in OMAP3430. + V2 is the update for the 45nm version of the IP used in OMAP3630 + and OMAP4430 Please note, that by default SmartReflex is only - initialized. To enable the automatic voltage - compensation for vdd mpu and vdd core from user space, + initialized and not enabled. To enable the automatic voltage + compensation for vdd mpu and vdd core from user space, user must write 1 to - /debug/voltage/vdd_<X>/smartreflex/autocomp, - where X is mpu or core for OMAP3. + /debug/smartreflex/sr_<X>/autocomp, + where X is mpu_iva or core for OMAP3. Optionally autocompensation can be enabled in the kernel by default during system init via the enable_on_init flag which an be passed as platform data to the smartreflex driver. -config OMAP_SMARTREFLEX_CLASS3 +config POWER_AVS_OMAP_CLASS3 bool "Class 3 mode of Smartreflex Implementation" - depends on OMAP_SMARTREFLEX && TWL4030_CORE + depends on POWER_AVS_OMAP && TWL4030_CORE help Say Y to enable Class 3 implementation of Smartreflex @@ -150,7 +149,7 @@ config OMAP_32K_TIMER This timer saves power compared to the OMAP_MPU_TIMER, and has support for no tick during idle. The 32KHz timer provides less intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is - currently only available for OMAP16XX, 24XX, 34XX and OMAP4. + currently only available for OMAP16XX, 24XX, 34XX and OMAP4/5. config OMAP3_L2_AUX_SECURE_SAVE_RESTORE bool "OMAP3 HS/EMU save and restore for L2 AUX control register" diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index ed8605f01155..961bf859bc0c 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -4,15 +4,13 @@ # Common support obj-y := common.o sram.o clock.o devices.o dma.o mux.o \ - usb.o fb.o counter_32k.o + fb.o counter_32k.o obj-m := obj-n := obj- := # omap_device support (OMAP2+ only at the moment) -obj-$(CONFIG_ARCH_OMAP2) += omap_device.o -obj-$(CONFIG_ARCH_OMAP3) += omap_device.o -obj-$(CONFIG_ARCH_OMAP4) += omap_device.o +obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 0a9b9a970113..89a3723b3538 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -77,3 +77,12 @@ void __init omap_init_consistent_dma_size(void) init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20); #endif } + +/* + * Stub function for OMAP2 so that common files + * continue to build when custom builds are used + */ +int __weak omap_secure_ram_reserve_memblock(void) +{ + return 0; +} diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 2132c4f389e1..dbf1e03029a5 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -29,7 +29,10 @@ #include <plat/clock.h> /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ -#define OMAP2_32KSYNCNT_CR_OFF 0x10 +#define OMAP2_32KSYNCNT_REV_OFF 0x0 +#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30) +#define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10 +#define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30 /* * 32KHz clocksource ... always available, on pretty most chips except @@ -84,9 +87,16 @@ int __init omap_init_clocksource_32k(void __iomem *vbase) int ret; /* - * 32k sync Counter register offset is at 0x10 + * 32k sync Counter IP register offsets vary between the + * highlander version and the legacy ones. + * The 'SCHEME' bits(30-31) of the revision register is used + * to identify the version. */ - sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF; + if (__raw_readl(vbase + OMAP2_32KSYNCNT_REV_OFF) & + OMAP2_32KSYNCNT_REV_SCHEME) + sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH; + else + sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_LOW; /* * 120000 rough estimate from the calculations in diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index cb16ade437cb..7fe626761e53 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -573,22 +573,25 @@ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode); static inline void omap_enable_channel_irq(int lch) { - u32 status; - /* Clear CSR */ if (cpu_class_is_omap1()) - status = p->dma_read(CSR, lch); - else if (cpu_class_is_omap2()) + p->dma_read(CSR, lch); + else p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); /* Enable some nice interrupts. */ p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch); } -static void omap_disable_channel_irq(int lch) +static inline void omap_disable_channel_irq(int lch) { - if (cpu_class_is_omap2()) - p->dma_write(0, CICR, lch); + /* disable channel interrupts */ + p->dma_write(0, CICR, lch); + /* Clear CSR */ + if (cpu_class_is_omap1()) + p->dma_read(CSR, lch); + else + p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); } void omap_enable_dma_irq(int lch, u16 bits) @@ -632,14 +635,14 @@ static inline void disable_lnk(int lch) l = p->dma_read(CLNK_CTRL, lch); /* Disable interrupts */ + omap_disable_channel_irq(lch); + if (cpu_class_is_omap1()) { - p->dma_write(0, CICR, lch); /* Set the STOP_LNK bit */ l |= 1 << 14; } if (cpu_class_is_omap2()) { - omap_disable_channel_irq(lch); /* Clear the ENABLE_LNK bit */ l &= ~(1 << 15); } @@ -657,6 +660,9 @@ static inline void omap2_enable_irq_lch(int lch) return; spin_lock_irqsave(&dma_chan_lock, flags); + /* clear IRQ STATUS */ + p->dma_write(1 << lch, IRQSTATUS_L0, lch); + /* Enable interrupt */ val = p->dma_read(IRQENABLE_L0, lch); val |= 1 << lch; p->dma_write(val, IRQENABLE_L0, lch); @@ -672,9 +678,12 @@ static inline void omap2_disable_irq_lch(int lch) return; spin_lock_irqsave(&dma_chan_lock, flags); + /* Disable interrupt */ val = p->dma_read(IRQENABLE_L0, lch); val &= ~(1 << lch); p->dma_write(val, IRQENABLE_L0, lch); + /* clear IRQ STATUS */ + p->dma_write(1 << lch, IRQSTATUS_L0, lch); spin_unlock_irqrestore(&dma_chan_lock, flags); } @@ -745,11 +754,8 @@ int omap_request_dma(int dev_id, const char *dev_name, } if (cpu_class_is_omap2()) { - omap2_enable_irq_lch(free_ch); omap_enable_channel_irq(free_ch); - /* Clear the CSR register and IRQ status register */ - p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, free_ch); - p->dma_write(1 << free_ch, IRQSTATUS_L0, 0); + omap2_enable_irq_lch(free_ch); } *dma_ch_out = free_ch; @@ -768,27 +774,19 @@ void omap_free_dma(int lch) return; } - if (cpu_class_is_omap1()) { - /* Disable all DMA interrupts for the channel. */ - p->dma_write(0, CICR, lch); - /* Make sure the DMA transfer is stopped. */ - p->dma_write(0, CCR, lch); - } - - if (cpu_class_is_omap2()) { + /* Disable interrupt for logical channel */ + if (cpu_class_is_omap2()) omap2_disable_irq_lch(lch); - /* Clear the CSR register and IRQ status register */ - p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); - p->dma_write(1 << lch, IRQSTATUS_L0, lch); + /* Disable all DMA interrupts for the channel. */ + omap_disable_channel_irq(lch); - /* Disable all DMA interrupts for the channel. */ - p->dma_write(0, CICR, lch); + /* Make sure the DMA transfer is stopped. */ + p->dma_write(0, CCR, lch); - /* Make sure the DMA transfer is stopped. */ - p->dma_write(0, CCR, lch); + /* Clear registers */ + if (cpu_class_is_omap2()) omap_clear_dma(lch); - } spin_lock_irqsave(&dma_chan_lock, flags); dma_chan[lch].dev_id = -1; @@ -943,8 +941,7 @@ void omap_stop_dma(int lch) u32 l; /* Disable all interrupts on the channel */ - if (cpu_class_is_omap1()) - p->dma_write(0, CICR, lch); + omap_disable_channel_irq(lch); l = p->dma_read(CCR, lch); if (IS_DMA_ERRATA(DMA_ERRATA_i541) && diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 3b0cfeb33d05..626ad8cad7a9 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -37,14 +37,16 @@ #include <linux/module.h> #include <linux/io.h> -#include <linux/slab.h> +#include <linux/device.h> #include <linux/err.h> #include <linux/pm_runtime.h> #include <plat/dmtimer.h> +#include <plat/omap-pm.h> #include <mach/hardware.h> +static u32 omap_reserved_systimers; static LIST_HEAD(omap_timer_list); static DEFINE_SPINLOCK(dm_timer_lock); @@ -133,17 +135,22 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer) int omap_dm_timer_prepare(struct omap_dm_timer *timer) { - struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data; int ret; - timer->fclk = clk_get(&timer->pdev->dev, "fck"); - if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) { - timer->fclk = NULL; - dev_err(&timer->pdev->dev, ": No fclk handle.\n"); - return -EINVAL; + /* + * FIXME: OMAP1 devices do not use the clock framework for dmtimers so + * do not call clk_get() for these devices. + */ + if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) { + timer->fclk = clk_get(&timer->pdev->dev, "fck"); + if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) { + timer->fclk = NULL; + dev_err(&timer->pdev->dev, ": No fclk handle.\n"); + return -EINVAL; + } } - if (pdata->needs_manual_reset) + if (timer->capability & OMAP_TIMER_NEEDS_RESET) omap_dm_timer_reset(timer); ret = omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); @@ -152,6 +159,21 @@ int omap_dm_timer_prepare(struct omap_dm_timer *timer) return ret; } +static inline u32 omap_dm_timer_reserved_systimer(int id) +{ + return (omap_reserved_systimers & (1 << (id - 1))) ? 1 : 0; +} + +int omap_dm_timer_reserve_systimer(int id) +{ + if (omap_dm_timer_reserved_systimer(id)) + return -ENODEV; + + omap_reserved_systimers |= (1 << (id - 1)); + + return 0; +} + struct omap_dm_timer *omap_dm_timer_request(void) { struct omap_dm_timer *timer = NULL, *t; @@ -325,10 +347,9 @@ int omap_dm_timer_start(struct omap_dm_timer *timer) omap_dm_timer_enable(timer); - if (timer->loses_context) { - u32 ctx_loss_cnt_after = - timer->get_context_loss_count(&timer->pdev->dev); - if (ctx_loss_cnt_after != timer->ctx_loss_count) + if (!(timer->capability & OMAP_TIMER_ALWON)) { + if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) != + timer->ctx_loss_count) omap_timer_restore_context(timer); } @@ -347,20 +368,18 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_start); int omap_dm_timer_stop(struct omap_dm_timer *timer) { unsigned long rate = 0; - struct dmtimer_platform_data *pdata; if (unlikely(!timer)) return -EINVAL; - pdata = timer->pdev->dev.platform_data; - if (!pdata->needs_manual_reset) + if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) rate = clk_get_rate(timer->fclk); __omap_dm_timer_stop(timer, timer->posted, rate); - if (timer->loses_context && timer->get_context_loss_count) + if (!(timer->capability & OMAP_TIMER_ALWON)) timer->ctx_loss_count = - timer->get_context_loss_count(&timer->pdev->dev); + omap_pm_get_dev_context_loss_count(&timer->pdev->dev); /* * Since the register values are computed and written within @@ -378,6 +397,8 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_stop); int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { int ret; + char *parent_name = NULL; + struct clk *fclk, *parent; struct dmtimer_platform_data *pdata; if (unlikely(!timer)) @@ -388,7 +409,49 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) if (source < 0 || source >= 3) return -EINVAL; - ret = pdata->set_timer_src(timer->pdev, source); + /* + * FIXME: Used for OMAP1 devices only because they do not currently + * use the clock framework to set the parent clock. To be removed + * once OMAP1 migrated to using clock framework for dmtimers + */ + if (pdata->set_timer_src) + return pdata->set_timer_src(timer->pdev, source); + + fclk = clk_get(&timer->pdev->dev, "fck"); + if (IS_ERR_OR_NULL(fclk)) { + pr_err("%s: fck not found\n", __func__); + return -EINVAL; + } + + switch (source) { + case OMAP_TIMER_SRC_SYS_CLK: + parent_name = "timer_sys_ck"; + break; + + case OMAP_TIMER_SRC_32_KHZ: + parent_name = "timer_32k_ck"; + break; + + case OMAP_TIMER_SRC_EXT_CLK: + parent_name = "timer_ext_ck"; + break; + } + + parent = clk_get(&timer->pdev->dev, parent_name); + if (IS_ERR_OR_NULL(parent)) { + pr_err("%s: %s not found\n", __func__, parent_name); + ret = -EINVAL; + goto out; + } + + ret = clk_set_parent(fclk, parent); + if (IS_ERR_VALUE(ret)) + pr_err("%s: failed to set %s as parent\n", __func__, + parent_name); + + clk_put(parent); +out: + clk_put(fclk); return ret; } @@ -431,10 +494,9 @@ int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, omap_dm_timer_enable(timer); - if (timer->loses_context) { - u32 ctx_loss_cnt_after = - timer->get_context_loss_count(&timer->pdev->dev); - if (ctx_loss_cnt_after != timer->ctx_loss_count) + if (!(timer->capability & OMAP_TIMER_ALWON)) { + if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) != + timer->ctx_loss_count) omap_timer_restore_context(timer); } @@ -627,68 +689,57 @@ EXPORT_SYMBOL_GPL(omap_dm_timers_active); */ static int __devinit omap_dm_timer_probe(struct platform_device *pdev) { - int ret; unsigned long flags; struct omap_dm_timer *timer; - struct resource *mem, *irq, *ioarea; + struct resource *mem, *irq; + struct device *dev = &pdev->dev; struct dmtimer_platform_data *pdata = pdev->dev.platform_data; if (!pdata) { - dev_err(&pdev->dev, "%s: no platform data.\n", __func__); + dev_err(dev, "%s: no platform data.\n", __func__); return -ENODEV; } irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (unlikely(!irq)) { - dev_err(&pdev->dev, "%s: no IRQ resource.\n", __func__); + dev_err(dev, "%s: no IRQ resource.\n", __func__); return -ENODEV; } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (unlikely(!mem)) { - dev_err(&pdev->dev, "%s: no memory resource.\n", __func__); + dev_err(dev, "%s: no memory resource.\n", __func__); return -ENODEV; } - ioarea = request_mem_region(mem->start, resource_size(mem), - pdev->name); - if (!ioarea) { - dev_err(&pdev->dev, "%s: region already claimed.\n", __func__); - return -EBUSY; - } - - timer = kzalloc(sizeof(struct omap_dm_timer), GFP_KERNEL); + timer = devm_kzalloc(dev, sizeof(struct omap_dm_timer), GFP_KERNEL); if (!timer) { - dev_err(&pdev->dev, "%s: no memory for omap_dm_timer.\n", - __func__); - ret = -ENOMEM; - goto err_free_ioregion; + dev_err(dev, "%s: memory alloc failed!\n", __func__); + return -ENOMEM; } - timer->io_base = ioremap(mem->start, resource_size(mem)); + timer->io_base = devm_request_and_ioremap(dev, mem); if (!timer->io_base) { - dev_err(&pdev->dev, "%s: ioremap failed.\n", __func__); - ret = -ENOMEM; - goto err_free_mem; + dev_err(dev, "%s: region already claimed.\n", __func__); + return -ENOMEM; } timer->id = pdev->id; timer->irq = irq->start; - timer->reserved = pdata->reserved; + timer->reserved = omap_dm_timer_reserved_systimer(timer->id); timer->pdev = pdev; - timer->loses_context = pdata->loses_context; - timer->get_context_loss_count = pdata->get_context_loss_count; + timer->capability = pdata->timer_capability; /* Skip pm_runtime_enable for OMAP1 */ - if (!pdata->needs_manual_reset) { - pm_runtime_enable(&pdev->dev); - pm_runtime_irq_safe(&pdev->dev); + if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) { + pm_runtime_enable(dev); + pm_runtime_irq_safe(dev); } if (!timer->reserved) { - pm_runtime_get_sync(&pdev->dev); + pm_runtime_get_sync(dev); __omap_dm_timer_init_regs(timer); - pm_runtime_put(&pdev->dev); + pm_runtime_put(dev); } /* add the timer element to the list */ @@ -696,17 +747,9 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev) list_add_tail(&timer->node, &omap_timer_list); spin_unlock_irqrestore(&dm_timer_lock, flags); - dev_dbg(&pdev->dev, "Device Probed.\n"); + dev_dbg(dev, "Device Probed.\n"); return 0; - -err_free_mem: - kfree(timer); - -err_free_ioregion: - release_mem_region(mem->start, resource_size(mem)); - - return ret; } /** @@ -727,7 +770,6 @@ static int __devexit omap_dm_timer_remove(struct platform_device *pdev) list_for_each_entry(timer, &omap_timer_list, node) if (timer->pdev->id == pdev->id) { list_del(&timer->node); - kfree(timer); ret = 0; break; } diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h index 4814c5b65306..e62f20a5c0af 100644 --- a/arch/arm/plat-omap/include/plat/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -57,44 +57,6 @@ struct omap_camera_sensor_config { int (*power_off)(void * data); }; -struct omap_usb_config { - /* Configure drivers according to the connectors on your board: - * - "A" connector (rectagular) - * ... for host/OHCI use, set "register_host". - * - "B" connector (squarish) or "Mini-B" - * ... for device/gadget use, set "register_dev". - * - "Mini-AB" connector (very similar to Mini-B) - * ... for OTG use as device OR host, initialize "otg" - */ - unsigned register_host:1; - unsigned register_dev:1; - u8 otg; /* port number, 1-based: usb1 == 2 */ - - u8 hmc_mode; - - /* implicitly true if otg: host supports remote wakeup? */ - u8 rwc; - - /* signaling pins used to talk to transceiver on usbN: - * 0 == usbN unused - * 2 == usb0-only, using internal transceiver - * 3 == 3 wire bidirectional - * 4 == 4 wire bidirectional - * 6 == 6 wire unidirectional (or TLL) - */ - u8 pins[3]; - - struct platform_device *udc_device; - struct platform_device *ohci_device; - struct platform_device *otg_device; - - u32 (*usb0_init)(unsigned nwires, unsigned is_device); - u32 (*usb1_init)(unsigned nwires); - u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup); - - int (*ocpi_enable)(void); -}; - struct omap_lcd_config { char panel_name[16]; char ctrl_name[16]; diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h index d0ed8c443a63..025d85a3ee86 100644 --- a/arch/arm/plat-omap/include/plat/clkdev_omap.h +++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h @@ -39,6 +39,7 @@ struct omap_clk { #define CK_443X (1 << 11) #define CK_TI816X (1 << 12) #define CK_446X (1 << 13) +#define CK_AM33XX (1 << 14) /* AM33xx specific clocks */ #define CK_1710 (1 << 15) /* 1710 extra for rate selection */ diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index d0ef57c1d71b..656b9862279e 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -156,7 +156,6 @@ struct dpll_data { u8 min_divider; u16 max_divider; u8 modes; -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) void __iomem *autoidle_reg; void __iomem *idlest_reg; u32 autoidle_mask; @@ -167,7 +166,6 @@ struct dpll_data { u8 auto_recal_bit; u8 recal_en_bit; u8 recal_st_bit; -# endif u8 flags; }; diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index de6c0a08f461..68b180edcfff 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -9,7 +9,7 @@ * * Written by Tony Lindgren <tony.lindgren@nokia.com> * - * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> + * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -70,6 +70,7 @@ unsigned int omap_rev(void); * cpu_is_omap443x(): True for OMAP4430 * cpu_is_omap446x(): True for OMAP4460 * cpu_is_omap447x(): True for OMAP4470 + * soc_is_omap543x(): True for OMAP5430, OMAP5432 */ #define GET_OMAP_CLASS (omap_rev() & 0xff) @@ -122,6 +123,7 @@ IS_OMAP_CLASS(24xx, 0x24) IS_OMAP_CLASS(34xx, 0x34) IS_OMAP_CLASS(44xx, 0x44) IS_AM_CLASS(35xx, 0x35) +IS_OMAP_CLASS(54xx, 0x54) IS_AM_CLASS(33xx, 0x33) IS_TI_CLASS(81xx, 0x81) @@ -133,6 +135,7 @@ IS_OMAP_SUBCLASS(363x, 0x363) IS_OMAP_SUBCLASS(443x, 0x443) IS_OMAP_SUBCLASS(446x, 0x446) IS_OMAP_SUBCLASS(447x, 0x447) +IS_OMAP_SUBCLASS(543x, 0x543) IS_TI_SUBCLASS(816x, 0x816) IS_TI_SUBCLASS(814x, 0x814) @@ -150,12 +153,14 @@ IS_AM_SUBCLASS(335x, 0x335) #define cpu_is_ti816x() 0 #define cpu_is_ti814x() 0 #define soc_is_am35xx() 0 -#define cpu_is_am33xx() 0 -#define cpu_is_am335x() 0 +#define soc_is_am33xx() 0 +#define soc_is_am335x() 0 #define cpu_is_omap44xx() 0 #define cpu_is_omap443x() 0 #define cpu_is_omap446x() 0 #define cpu_is_omap447x() 0 +#define soc_is_omap54xx() 0 +#define soc_is_omap543x() 0 #if defined(MULTI_OMAP1) # if defined(CONFIG_ARCH_OMAP730) @@ -238,9 +243,7 @@ IS_AM_SUBCLASS(335x, 0x335) /* * Macros to detect individual cpu types. * These are only rarely needed. - * cpu_is_omap330(): True for OMAP330 - * cpu_is_omap730(): True for OMAP730 - * cpu_is_omap850(): True for OMAP850 + * cpu_is_omap310(): True for OMAP310 * cpu_is_omap1510(): True for OMAP1510 * cpu_is_omap1610(): True for OMAP1610 * cpu_is_omap1611(): True for OMAP1611 @@ -262,8 +265,6 @@ static inline int is_omap ##type (void) \ } IS_OMAP_TYPE(310, 0x0310) -IS_OMAP_TYPE(730, 0x0730) -IS_OMAP_TYPE(850, 0x0850) IS_OMAP_TYPE(1510, 0x1510) IS_OMAP_TYPE(1610, 0x1610) IS_OMAP_TYPE(1611, 0x1611) @@ -277,8 +278,6 @@ IS_OMAP_TYPE(2430, 0x2430) IS_OMAP_TYPE(3430, 0x3430) #define cpu_is_omap310() 0 -#define cpu_is_omap730() 0 -#define cpu_is_omap850() 0 #define cpu_is_omap1510() 0 #define cpu_is_omap1610() 0 #define cpu_is_omap5912() 0 @@ -291,22 +290,13 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_is_omap2430() 0 #define cpu_is_omap3430() 0 #define cpu_is_omap3630() 0 +#define soc_is_omap5430() 0 /* * Whether we have MULTI_OMAP1 or not, we still need to distinguish - * between 730 vs 850, 330 vs. 1510 and 1611B/5912 vs. 1710. + * between 310 vs. 1510 and 1611B/5912 vs. 1710. */ -#if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap730 -# define cpu_is_omap730() is_omap730() -#endif - -#if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap850 -# define cpu_is_omap850() is_omap850() -#endif - #if defined(CONFIG_ARCH_OMAP15XX) # undef cpu_is_omap310 # undef cpu_is_omap1510 @@ -344,8 +334,6 @@ IS_OMAP_TYPE(3430, 0x3430) # undef cpu_is_ti816x # undef cpu_is_ti814x # undef soc_is_am35xx -# undef cpu_is_am33xx -# undef cpu_is_am335x # define cpu_is_omap3430() is_omap3430() # undef cpu_is_omap3630 # define cpu_is_omap3630() is_omap363x() @@ -353,8 +341,13 @@ IS_OMAP_TYPE(3430, 0x3430) # define cpu_is_ti816x() is_ti816x() # define cpu_is_ti814x() is_ti814x() # define soc_is_am35xx() is_am35xx() -# define cpu_is_am33xx() is_am33xx() -# define cpu_is_am335x() is_am335x() +#endif + +# if defined(CONFIG_SOC_AM33XX) +# undef soc_is_am33xx +# undef soc_is_am335x +# define soc_is_am33xx() is_am33xx() +# define soc_is_am335x() is_am335x() #endif # if defined(CONFIG_ARCH_OMAP4) @@ -368,11 +361,18 @@ IS_OMAP_TYPE(3430, 0x3430) # define cpu_is_omap447x() is_omap447x() # endif +# if defined(CONFIG_SOC_OMAP5) +# undef soc_is_omap54xx +# undef soc_is_omap543x +# define soc_is_omap54xx() is_omap54xx() +# define soc_is_omap543x() is_omap543x() +#endif + /* Macros to detect if we have OMAP1 or OMAP2 */ #define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ cpu_is_omap16xx()) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ - cpu_is_omap44xx()) + cpu_is_omap44xx() || soc_is_omap54xx()) /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 @@ -408,7 +408,7 @@ IS_OMAP_TYPE(3430, 0x3430) #define AM35XX_REV_ES1_0 AM35XX_CLASS #define AM35XX_REV_ES1_1 (AM35XX_CLASS | (0x1 << 8)) -#define AM335X_CLASS 0x33500034 +#define AM335X_CLASS 0x33500033 #define AM335X_REV_ES1_0 AM335X_CLASS #define OMAP443X_CLASS 0x44300044 @@ -425,9 +425,14 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP447X_CLASS 0x44700044 #define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8)) +#define OMAP54XX_CLASS 0x54000054 +#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8)) +#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8)) + void omap2xxx_check_revision(void); void omap3xxx_check_revision(void); void omap4xxx_check_revision(void); +void omap5xxx_check_revision(void); void omap3xxx_check_features(void); void ti81xx_check_features(void); void omap4xxx_check_features(void); diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 5da73562e486..19e7fa577bd0 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -55,23 +55,17 @@ #define OMAP_TIMER_TRIGGER_OVERFLOW 0x01 #define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02 -/* - * IP revision identifier so that Highlander IP - * in OMAP4 can be distinguished. - */ -#define OMAP_TIMER_IP_VERSION_1 0x1 - /* timer capabilities used in hwmod database */ #define OMAP_TIMER_SECURE 0x80000000 #define OMAP_TIMER_ALWON 0x40000000 #define OMAP_TIMER_HAS_PWM 0x20000000 +#define OMAP_TIMER_NEEDS_RESET 0x10000000 struct omap_timer_capability_dev_attr { u32 timer_capability; }; struct omap_dm_timer; -struct clk; struct timer_regs { u32 tidr; @@ -96,16 +90,12 @@ struct timer_regs { }; struct dmtimer_platform_data { + /* set_timer_src - Only used for OMAP1 devices */ int (*set_timer_src)(struct platform_device *pdev, int source); - int timer_ip_version; - u32 needs_manual_reset:1; - bool reserved; - - bool loses_context; - - int (*get_context_loss_count)(struct device *dev); + u32 timer_capability; }; +int omap_dm_timer_reserve_systimer(int id); struct omap_dm_timer *omap_dm_timer_request(void); struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); int omap_dm_timer_free(struct omap_dm_timer *timer); @@ -272,13 +262,11 @@ struct omap_dm_timer { unsigned reserved:1; unsigned posted:1; struct timer_regs context; - bool loses_context; int ctx_loss_count; int revision; + u32 capability; struct platform_device *pdev; struct list_head node; - - int (*get_context_loss_count)(struct device *dev); }; int omap_dm_timer_prepare(struct omap_dm_timer *timer); diff --git a/arch/arm/plat-omap/include/plat/dsp.h b/arch/arm/plat-omap/include/plat/dsp.h index 9c604b390f9f..5927709b1908 100644 --- a/arch/arm/plat-omap/include/plat/dsp.h +++ b/arch/arm/plat-omap/include/plat/dsp.h @@ -18,6 +18,9 @@ struct omap_dsp_platform_data { u32 (*dsp_cm_read)(s16 , u16); u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16); + void (*set_bootaddr)(u32); + void (*set_bootmode)(u8); + phys_addr_t phys_mempool_base; phys_addr_t phys_mempool_size; }; diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h index e897978371c2..ddbde38e1e33 100644 --- a/arch/arm/plat-omap/include/plat/hardware.h +++ b/arch/arm/plat-omap/include/plat/hardware.h @@ -288,5 +288,6 @@ #include <plat/omap44xx.h> #include <plat/ti81xx.h> #include <plat/am33xx.h> +#include <plat/omap54xx.h> #endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index 5493bd95da5e..eb3e4d555343 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -81,8 +81,6 @@ struct omap_mmc_platform_data { /* Return context loss count due to PM states changing */ int (*get_context_loss_count)(struct device *dev); - u64 dma_mask; - /* Integrating attributes from the omap_hwmod layer */ u8 controller_flags; diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h index 999ffba2690c..045e320f1067 100644 --- a/arch/arm/plat-omap/include/plat/multi.h +++ b/arch/arm/plat-omap/include/plat/multi.h @@ -99,4 +99,13 @@ # endif #endif +#ifdef CONFIG_SOC_OMAP5 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap5 +# endif +#endif + #endif /* __PLAT_OMAP_MULTI_H */ diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index aeba71796ad9..323948959200 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -99,7 +99,7 @@ /* * OMAP730/850 has a slightly different config for the pin mux. - * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and + * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and * not the FUNC_MUX_CTRL_x regs from hardware.h * - for pull-up/down, only has one enable bit which is is in the same register * as mux config diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h index 8c7994ce9869..0e4acd2d2deb 100644 --- a/arch/arm/plat-omap/include/plat/omap-secure.h +++ b/arch/arm/plat-omap/include/plat/omap-secure.h @@ -3,12 +3,7 @@ #include <linux/types.h> -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) extern int omap_secure_ram_reserve_memblock(void); -#else -static inline void omap_secure_ram_reserve_memblock(void) -{ } -#endif #ifdef CONFIG_OMAP4_ERRATA_I688 extern int omap_barrier_reserve_memblock(void); diff --git a/arch/arm/plat-omap/include/plat/omap54xx.h b/arch/arm/plat-omap/include/plat/omap54xx.h new file mode 100644 index 000000000000..a2582bb3cab3 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap54xx.h @@ -0,0 +1,32 @@ +/*: + * Address mappings and base address for OMAP5 interconnects + * and peripherals. + * + * Copyright (C) 2012 Texas Instruments + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * Sricharan <r.sricharan@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_SOC_OMAP54XX_H +#define __ASM_SOC_OMAP54XX_H + +/* + * Please place only base defines here and put the rest in device + * specific headers. + */ +#define L4_54XX_BASE 0x4a000000 +#define L4_WK_54XX_BASE 0x4ae00000 +#define L4_PER_54XX_BASE 0x48000000 +#define L3_54XX_BASE 0x44000000 +#define OMAP54XX_32KSYNCT_BASE 0x4ae04000 +#define OMAP54XX_CM_CORE_AON_BASE 0x4a004000 +#define OMAP54XX_CM_CORE_BASE 0x4a008000 +#define OMAP54XX_PRM_BASE 0x4ae06000 +#define OMAP54XX_PRCM_MPU_BASE 0x48243000 +#define OMAP54XX_SCM_BASE 0x4a002000 +#define OMAP54XX_CTRL_BASE 0x4a002800 + +#endif /* __ASM_SOC_OMAP555554XX_H */ diff --git a/arch/arm/plat-omap/include/plat/omap730.h b/arch/arm/plat-omap/include/plat/omap730.h deleted file mode 100644 index 14272bc1a6fd..000000000000 --- a/arch/arm/plat-omap/include/plat/omap730.h +++ /dev/null @@ -1,102 +0,0 @@ -/* arch/arm/plat-omap/include/mach/omap730.h - * - * Hardware definitions for TI OMAP730 processor. - * - * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP730_H -#define __ASM_ARCH_OMAP730_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP730_DSP_BASE 0xE0000000 -#define OMAP730_DSP_SIZE 0x50000 -#define OMAP730_DSP_START 0xE0000000 - -#define OMAP730_DSPREG_BASE 0xE1000000 -#define OMAP730_DSPREG_SIZE SZ_128K -#define OMAP730_DSPREG_START 0xE1000000 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 specific configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_CONFIG_BASE 0xfffe1000 -#define OMAP730_IO_CONF_0 0xfffe1070 -#define OMAP730_IO_CONF_1 0xfffe1074 -#define OMAP730_IO_CONF_2 0xfffe1078 -#define OMAP730_IO_CONF_3 0xfffe107c -#define OMAP730_IO_CONF_4 0xfffe1080 -#define OMAP730_IO_CONF_5 0xfffe1084 -#define OMAP730_IO_CONF_6 0xfffe1088 -#define OMAP730_IO_CONF_7 0xfffe108c -#define OMAP730_IO_CONF_8 0xfffe1090 -#define OMAP730_IO_CONF_9 0xfffe1094 -#define OMAP730_IO_CONF_10 0xfffe1098 -#define OMAP730_IO_CONF_11 0xfffe109c -#define OMAP730_IO_CONF_12 0xfffe10a0 -#define OMAP730_IO_CONF_13 0xfffe10a4 - -#define OMAP730_MODE_1 0xfffe1010 -#define OMAP730_MODE_2 0xfffe1014 - -/* CSMI specials: in terms of base + offset */ -#define OMAP730_MODE2_OFFSET 0x14 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 traffic controller configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_FLASH_CFG_0 0xfffecc10 -#define OMAP730_FLASH_ACFG_0 0xfffecc50 -#define OMAP730_FLASH_CFG_1 0xfffecc14 -#define OMAP730_FLASH_ACFG_1 0xfffecc54 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 DSP control registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_ICR_BASE 0xfffbb800 -#define OMAP730_DSP_M_CTL 0xfffbb804 -#define OMAP730_DSP_MMU_BASE 0xfffed200 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 PCC_UPLD configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_PCC_UPLD_CTRL_BASE (0xfffe0900) -#define OMAP730_PCC_UPLD_CTRL (OMAP730_PCC_UPLD_CTRL_BASE + 0x00) - -#endif /* __ASM_ARCH_OMAP730_H */ - diff --git a/arch/arm/plat-omap/include/plat/omap850.h b/arch/arm/plat-omap/include/plat/omap850.h deleted file mode 100644 index c33f67981712..000000000000 --- a/arch/arm/plat-omap/include/plat/omap850.h +++ /dev/null @@ -1,102 +0,0 @@ -/* arch/arm/plat-omap/include/mach/omap850.h - * - * Hardware definitions for TI OMAP850 processor. - * - * Derived from omap730.h by Zebediah C. McClure <zmc@lurian.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP850_H -#define __ASM_ARCH_OMAP850_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP850_DSP_BASE 0xE0000000 -#define OMAP850_DSP_SIZE 0x50000 -#define OMAP850_DSP_START 0xE0000000 - -#define OMAP850_DSPREG_BASE 0xE1000000 -#define OMAP850_DSPREG_SIZE SZ_128K -#define OMAP850_DSPREG_START 0xE1000000 - -/* - * ---------------------------------------------------------------------------- - * OMAP850 specific configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP850_CONFIG_BASE 0xfffe1000 -#define OMAP850_IO_CONF_0 0xfffe1070 -#define OMAP850_IO_CONF_1 0xfffe1074 -#define OMAP850_IO_CONF_2 0xfffe1078 -#define OMAP850_IO_CONF_3 0xfffe107c -#define OMAP850_IO_CONF_4 0xfffe1080 -#define OMAP850_IO_CONF_5 0xfffe1084 -#define OMAP850_IO_CONF_6 0xfffe1088 -#define OMAP850_IO_CONF_7 0xfffe108c -#define OMAP850_IO_CONF_8 0xfffe1090 -#define OMAP850_IO_CONF_9 0xfffe1094 -#define OMAP850_IO_CONF_10 0xfffe1098 -#define OMAP850_IO_CONF_11 0xfffe109c -#define OMAP850_IO_CONF_12 0xfffe10a0 -#define OMAP850_IO_CONF_13 0xfffe10a4 - -#define OMAP850_MODE_1 0xfffe1010 -#define OMAP850_MODE_2 0xfffe1014 - -/* CSMI specials: in terms of base + offset */ -#define OMAP850_MODE2_OFFSET 0x14 - -/* - * ---------------------------------------------------------------------------- - * OMAP850 traffic controller configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP850_FLASH_CFG_0 0xfffecc10 -#define OMAP850_FLASH_ACFG_0 0xfffecc50 -#define OMAP850_FLASH_CFG_1 0xfffecc14 -#define OMAP850_FLASH_ACFG_1 0xfffecc54 - -/* - * ---------------------------------------------------------------------------- - * OMAP850 DSP control registers - * ---------------------------------------------------------------------------- - */ -#define OMAP850_ICR_BASE 0xfffbb800 -#define OMAP850_DSP_M_CTL 0xfffbb804 -#define OMAP850_DSP_MMU_BASE 0xfffed200 - -/* - * ---------------------------------------------------------------------------- - * OMAP850 PCC_UPLD configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP850_PCC_UPLD_CTRL_BASE (0xfffe0900) -#define OMAP850_PCC_UPLD_CTRL (OMAP850_PCC_UPLD_CTRL_BASE + 0x00) - -#endif /* __ASM_ARCH_OMAP850_H */ - diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index c835b7194ff5..6132972aff37 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -41,6 +41,7 @@ struct omap_device; extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1; extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2; +extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3; /* * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant @@ -69,6 +70,17 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2; #define SYSC_TYPE2_SIDLEMODE_MASK (0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT) #define SYSC_TYPE2_MIDLEMODE_SHIFT 4 #define SYSC_TYPE2_MIDLEMODE_MASK (0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT) +#define SYSC_TYPE2_DMADISABLE_SHIFT 16 +#define SYSC_TYPE2_DMADISABLE_MASK (0x1 << SYSC_TYPE2_DMADISABLE_SHIFT) + +/* + * OCP SYSCONFIG bit shifts/masks TYPE3. + * This is applicable for some IPs present in AM33XX + */ +#define SYSC_TYPE3_SIDLEMODE_SHIFT 0 +#define SYSC_TYPE3_SIDLEMODE_MASK (0x3 << SYSC_TYPE3_SIDLEMODE_SHIFT) +#define SYSC_TYPE3_MIDLEMODE_SHIFT 2 +#define SYSC_TYPE3_MIDLEMODE_MASK (0x3 << SYSC_TYPE3_MIDLEMODE_SHIFT) /* OCP SYSSTATUS bit shifts/masks */ #define SYSS_RESETDONE_SHIFT 0 @@ -283,6 +295,7 @@ struct omap_hwmod_ocp_if { #define SYSS_HAS_RESET_STATUS (1 << 7) #define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */ #define SYSC_HAS_RESET_STATUS (1 << 9) +#define SYSC_HAS_DMADISABLE (1 << 10) /* omap_hwmod_sysconfig.clockact flags */ #define CLOCKACT_TEST_BOTH 0x0 @@ -298,6 +311,7 @@ struct omap_hwmod_ocp_if { * @enwkup_shift: Offset of the enawakeup bit * @srst_shift: Offset of the softreset bit * @autoidle_shift: Offset of the autoidle bit + * @dmadisable_shift: Offset of the dmadisable bit */ struct omap_hwmod_sysc_fields { u8 midle_shift; @@ -306,6 +320,7 @@ struct omap_hwmod_sysc_fields { u8 enwkup_shift; u8 srst_shift; u8 autoidle_shift; + u8 dmadisable_shift; }; /** @@ -374,11 +389,13 @@ struct omap_hwmod_omap2_prcm { * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data * @clkctrl_reg: PRCM address of the clock control register * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM + * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM * @submodule_wkdep_bit: bit shift of the WKDEP range */ struct omap_hwmod_omap4_prcm { u16 clkctrl_offs; u16 rstctrl_offs; + u16 rstst_offs; u16 context_offs; u8 submodule_wkdep_bit; u8 modulemode; @@ -629,6 +646,10 @@ int omap_hwmod_no_setup_reset(struct omap_hwmod *oh); int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx); +extern void __init omap_hwmod_init(void); + +const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh); + /* * Chip variant-specific hwmod init routines - XXX should be converted * to use initcalls once the initial boot ordering is straightened out diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h index 9bb978ecd884..36d6a7666216 100644 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ b/arch/arm/plat-omap/include/plat/sdrc.h @@ -123,7 +123,7 @@ struct omap_sdrc_params { u32 mr; }; -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#ifdef CONFIG_SOC_HAS_OMAP2_SDRC void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1); #else diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index b073e5f2b190..65fce44dce34 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -60,6 +60,17 @@ /* AM3505/3517 UART4 */ #define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ +/* AM33XX serial port */ +#define AM33XX_UART1_BASE 0x44E09000 + +/* OMAP5 serial ports */ +#define OMAP5_UART1_BASE OMAP2_UART1_BASE +#define OMAP5_UART2_BASE OMAP2_UART2_BASE +#define OMAP5_UART3_BASE OMAP4_UART3_BASE +#define OMAP5_UART4_BASE OMAP4_UART4_BASE +#define OMAP5_UART5_BASE 0x48066000 +#define OMAP5_UART6_BASE 0x48068000 + /* External port on Zoom2/3 */ #define ZOOM_UART_BASE 0x10000000 #define ZOOM_UART_VIRT 0xfa400000 @@ -93,6 +104,9 @@ #define TI81XXUART1 81 #define TI81XXUART2 82 #define TI81XXUART3 83 +#define AM33XXUART1 84 +#define OMAP5UART3 OMAP4UART3 +#define OMAP5UART4 OMAP4UART4 #define ZOOM_UART 95 /* Only on zoom2/3 */ /* This is only used by 8250.c for omap1510 */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index cc3f11ba7a99..b8d19a136781 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -95,6 +95,9 @@ static inline void flush(void) _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \ OMAP4UART##p) +#define DEBUG_LL_OMAP5(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP5UART##p) /* Zoom2/3 shift is different for UART1 and external port */ #define DEBUG_LL_ZOOM(mach) \ _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART) @@ -103,6 +106,10 @@ static inline void flush(void) _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ TI81XXUART##p) +#define DEBUG_LL_AM33XX(p, mach) \ + _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ + AM33XXUART##p) + static inline void __arch_decomp_setup(unsigned long arch_id) { int port = 0; @@ -173,6 +180,9 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_OMAP4(3, omap_4430sdp); DEBUG_LL_OMAP4(3, omap4_panda); + /* omap5 based boards using UART3 */ + DEBUG_LL_OMAP5(3, omap5_sevm); + /* zoom2/3 external uart */ DEBUG_LL_ZOOM(omap_zoom2); DEBUG_LL_ZOOM(omap_zoom3); @@ -183,6 +193,8 @@ static inline void __arch_decomp_setup(unsigned long arch_id) /* TI8148 base boards using UART1 */ DEBUG_LL_TI81XX(1, ti8148evm); + /* AM33XX base boards using UART1 */ + DEBUG_LL_AM33XX(1, am335xevm); } while (0); } diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 762eeb0626c1..548a4c8d63df 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -44,6 +44,8 @@ struct usbhs_omap_board_data { struct regulator *regulator[OMAP3_HS_USB_PORTS]; }; +#ifdef CONFIG_ARCH_OMAP2PLUS + struct ehci_hcd_omap_platform_data { enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; int reset_gpio_port[OMAP3_HS_USB_PORTS]; @@ -64,26 +66,6 @@ struct usbhs_omap_platform_data { }; /*-------------------------------------------------------------------------*/ -#define OMAP1_OTG_BASE 0xfffb0400 -#define OMAP1_UDC_BASE 0xfffb4000 -#define OMAP1_OHCI_BASE 0xfffba000 - -#define OMAP2_OHCI_BASE 0x4805e000 -#define OMAP2_UDC_BASE 0x4805e200 -#define OMAP2_OTG_BASE 0x4805e300 - -#ifdef CONFIG_ARCH_OMAP1 - -#define OTG_BASE OMAP1_OTG_BASE -#define UDC_BASE OMAP1_UDC_BASE -#define OMAP_OHCI_BASE OMAP1_OHCI_BASE - -#else - -#define OTG_BASE OMAP2_OTG_BASE -#define UDC_BASE OMAP2_UDC_BASE -#define OMAP_OHCI_BASE OMAP2_OHCI_BASE - struct omap_musb_board_data { u8 interface_type; u8 mode; @@ -107,44 +89,6 @@ extern int omap4430_phy_init(struct device *dev); extern int omap4430_phy_exit(struct device *dev); extern int omap4430_phy_suspend(struct device *dev, int suspend); -/* - * NOTE: Please update omap USB drivers to use ioremap + read/write - */ - -#define OMAP2_L4_IO_OFFSET 0xb2000000 -#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) - -static inline u8 omap_readb(u32 pa) -{ - return __raw_readb(OMAP2_L4_IO_ADDRESS(pa)); -} - -static inline u16 omap_readw(u32 pa) -{ - return __raw_readw(OMAP2_L4_IO_ADDRESS(pa)); -} - -static inline u32 omap_readl(u32 pa) -{ - return __raw_readl(OMAP2_L4_IO_ADDRESS(pa)); -} - -static inline void omap_writeb(u8 v, u32 pa) -{ - __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa)); -} - - -static inline void omap_writew(u16 v, u32 pa) -{ - __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa)); -} - -static inline void omap_writel(u32 v, u32 pa) -{ - __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa)); -} - #endif extern void am35x_musb_reset(void); @@ -153,142 +97,6 @@ extern void am35x_musb_clear_irq(void); extern void am35x_set_mode(u8 musb_mode); extern void ti81xx_musb_phy_power(u8 on); -/* - * FIXME correct answer depends on hmc_mode, - * as does (on omap1) any nonzero value for config->otg port number - */ -#ifdef CONFIG_USB_GADGET_OMAP -#define is_usb0_device(config) 1 -#else -#define is_usb0_device(config) 0 -#endif - -void omap_otg_init(struct omap_usb_config *config); - -#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE) -void omap1_usb_init(struct omap_usb_config *pdata); -#else -static inline void omap1_usb_init(struct omap_usb_config *pdata) -{ -} -#endif - -#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE) -void omap2_usbfs_init(struct omap_usb_config *pdata); -#else -static inline void omap2_usbfs_init(struct omap_usb_config *pdata) -{ -} -#endif - -/*-------------------------------------------------------------------------*/ - -/* - * OTG and transceiver registers, for OMAPs starting with ARM926 - */ -#define OTG_REV (OTG_BASE + 0x00) -#define OTG_SYSCON_1 (OTG_BASE + 0x04) -# define USB2_TRX_MODE(w) (((w)>>24)&0x07) -# define USB1_TRX_MODE(w) (((w)>>20)&0x07) -# define USB0_TRX_MODE(w) (((w)>>16)&0x07) -# define OTG_IDLE_EN (1 << 15) -# define HST_IDLE_EN (1 << 14) -# define DEV_IDLE_EN (1 << 13) -# define OTG_RESET_DONE (1 << 2) -# define OTG_SOFT_RESET (1 << 1) -#define OTG_SYSCON_2 (OTG_BASE + 0x08) -# define OTG_EN (1 << 31) -# define USBX_SYNCHRO (1 << 30) -# define OTG_MST16 (1 << 29) -# define SRP_GPDATA (1 << 28) -# define SRP_GPDVBUS (1 << 27) -# define SRP_GPUVBUS(w) (((w)>>24)&0x07) -# define A_WAIT_VRISE(w) (((w)>>20)&0x07) -# define B_ASE_BRST(w) (((w)>>16)&0x07) -# define SRP_DPW (1 << 14) -# define SRP_DATA (1 << 13) -# define SRP_VBUS (1 << 12) -# define OTG_PADEN (1 << 10) -# define HMC_PADEN (1 << 9) -# define UHOST_EN (1 << 8) -# define HMC_TLLSPEED (1 << 7) -# define HMC_TLLATTACH (1 << 6) -# define OTG_HMC(w) (((w)>>0)&0x3f) -#define OTG_CTRL (OTG_BASE + 0x0c) -# define OTG_USB2_EN (1 << 29) -# define OTG_USB2_DP (1 << 28) -# define OTG_USB2_DM (1 << 27) -# define OTG_USB1_EN (1 << 26) -# define OTG_USB1_DP (1 << 25) -# define OTG_USB1_DM (1 << 24) -# define OTG_USB0_EN (1 << 23) -# define OTG_USB0_DP (1 << 22) -# define OTG_USB0_DM (1 << 21) -# define OTG_ASESSVLD (1 << 20) -# define OTG_BSESSEND (1 << 19) -# define OTG_BSESSVLD (1 << 18) -# define OTG_VBUSVLD (1 << 17) -# define OTG_ID (1 << 16) -# define OTG_DRIVER_SEL (1 << 15) -# define OTG_A_SETB_HNPEN (1 << 12) -# define OTG_A_BUSREQ (1 << 11) -# define OTG_B_HNPEN (1 << 9) -# define OTG_B_BUSREQ (1 << 8) -# define OTG_BUSDROP (1 << 7) -# define OTG_PULLDOWN (1 << 5) -# define OTG_PULLUP (1 << 4) -# define OTG_DRV_VBUS (1 << 3) -# define OTG_PD_VBUS (1 << 2) -# define OTG_PU_VBUS (1 << 1) -# define OTG_PU_ID (1 << 0) -#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ -# define DRIVER_SWITCH (1 << 15) -# define A_VBUS_ERR (1 << 13) -# define A_REQ_TMROUT (1 << 12) -# define A_SRP_DETECT (1 << 11) -# define B_HNP_FAIL (1 << 10) -# define B_SRP_TMROUT (1 << 9) -# define B_SRP_DONE (1 << 8) -# define B_SRP_STARTED (1 << 7) -# define OPRT_CHG (1 << 0) -#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ - // same bits as in IRQ_EN -#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ -# define OTGVPD (1 << 14) -# define OTGVPU (1 << 13) -# define OTGPUID (1 << 12) -# define USB2VDR (1 << 10) -# define USB2PDEN (1 << 9) -# define USB2PUEN (1 << 8) -# define USB1VDR (1 << 6) -# define USB1PDEN (1 << 5) -# define USB1PUEN (1 << 4) -# define USB0VDR (1 << 2) -# define USB0PDEN (1 << 1) -# define USB0PUEN (1 << 0) -#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ -#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ - -/*-------------------------------------------------------------------------*/ - -/* OMAP1 */ -#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) -# define CONF_USB2_UNI_R (1 << 8) -# define CONF_USB1_UNI_R (1 << 7) -# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) -# define CONF_USB0_ISOLATE_R (1 << 3) -# define CONF_USB_PWRDN_DM_R (1 << 2) -# define CONF_USB_PWRDN_DP_R (1 << 1) - -/* OMAP2 */ -# define USB_UNIDIR 0x0 -# define USB_UNIDIR_TLL 0x1 -# define USB_BIDIR 0x2 -# define USB_BIDIR_TLL 0x3 -# define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2))) -# define USBT2TLL5PI (1 << 17) -# define USB0PUENACTLOI (1 << 16) -# define USBSTANDBYCTRL (1 << 15) /* AM35x */ /* USB 2.0 PHY Control */ #define CONF2_PHY_GPIOMODE (1 << 23) diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h index 0a6a482ec014..5be4d5def427 100644 --- a/arch/arm/plat-omap/include/plat/voltage.h +++ b/arch/arm/plat-omap/include/plat/voltage.h @@ -11,10 +11,29 @@ #ifndef __ARCH_ARM_OMAP_VOLTAGE_H #define __ARCH_ARM_OMAP_VOLTAGE_H +/** + * struct omap_volt_data - Omap voltage specific data. + * @voltage_nominal: The possible voltage value in uV + * @sr_efuse_offs: The offset of the efuse register(from system + * control module base address) from where to read + * the n-target value for the smartreflex module. + * @sr_errminlimit: Error min limit value for smartreflex. This value + * differs at differnet opp and thus is linked + * with voltage. + * @vp_errorgain: Error gain value for the voltage processor. This + * field also differs according to the voltage/opp. + */ +struct omap_volt_data { + u32 volt_nominal; + u32 sr_efuse_offs; + u8 sr_errminlimit; + u8 vp_errgain; +}; struct voltagedomain; struct voltagedomain *voltdm_lookup(const char *name); int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt); unsigned long voltdm_get_voltage(struct voltagedomain *voltdm); - +struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, + unsigned long volt); #endif diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index ad32621aa52e..5e13c3884aa4 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -282,6 +282,8 @@ static int omap_mbox_startup(struct omap_mbox *mbox) } mbox->rxq = mq; mq->mbox = mbox; + + omap_mbox_enable_irq(mbox, IRQ_RX); } mutex_unlock(&mbox_configured_lock); return 0; @@ -305,6 +307,7 @@ static void omap_mbox_fini(struct omap_mbox *mbox) mutex_lock(&mbox_configured_lock); if (!--mbox->use_count) { + omap_mbox_disable_irq(mbox, IRQ_RX); free_irq(mbox->irq, mbox); tasklet_kill(&mbox->txq->tasklet); flush_work_sync(&mbox->rxq->work); @@ -338,13 +341,15 @@ struct omap_mbox *omap_mbox_get(const char *name, struct notifier_block *nb) if (!mbox) return ERR_PTR(-ENOENT); - ret = omap_mbox_startup(mbox); - if (ret) - return ERR_PTR(-ENODEV); - if (nb) blocking_notifier_chain_register(&mbox->notifier, nb); + ret = omap_mbox_startup(mbox); + if (ret) { + blocking_notifier_chain_unregister(&mbox->notifier, nb); + return ERR_PTR(-ENODEV); + } + return mbox; } EXPORT_SYMBOL(omap_mbox_get); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 477363c163ec..766181cb5c95 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -6,8 +6,8 @@ * Copyright (C) 2005 Nokia Corporation * Written by Tony Lindgren <tony@atomide.com> * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * Copyright (C) 2009-2012 Texas Instruments + * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -44,6 +44,7 @@ #else #define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) #endif +#define OMAP5_SRAM_PA 0x40300000 #if defined(CONFIG_ARCH_OMAP2PLUS) #define SRAM_BOOTLOADER_SZ 0x00 @@ -85,7 +86,7 @@ static int is_sram_locked(void) __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ } - if (cpu_is_omap34xx() && !cpu_is_am33xx()) { + if (cpu_is_omap34xx()) { __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ @@ -118,12 +119,15 @@ static void __init omap_detect_sram(void) } else if (cpu_is_omap44xx()) { omap_sram_start = OMAP4_SRAM_PUB_PA; omap_sram_size = 0xa000; /* 40K */ + } else if (soc_is_omap54xx()) { + omap_sram_start = OMAP5_SRAM_PA; + omap_sram_size = SZ_128K; /* 128KB */ } else { omap_sram_start = OMAP2_SRAM_PUB_PA; omap_sram_size = 0x800; /* 2K */ } } else { - if (cpu_is_am33xx()) { + if (soc_is_am33xx()) { omap_sram_start = AM33XX_SRAM_PA; omap_sram_size = 0x10000; /* 64K */ } else if (cpu_is_omap34xx()) { @@ -132,6 +136,9 @@ static void __init omap_detect_sram(void) } else if (cpu_is_omap44xx()) { omap_sram_start = OMAP4_SRAM_PA; omap_sram_size = 0xe000; /* 56K */ + } else if (soc_is_omap54xx()) { + omap_sram_start = OMAP5_SRAM_PA; + omap_sram_size = SZ_128K; /* 128KB */ } else { omap_sram_start = OMAP2_SRAM_PA; if (cpu_is_omap242x()) @@ -386,7 +393,7 @@ int __init omap_sram_init(void) omap242x_sram_init(); else if (cpu_is_omap2430()) omap243x_sram_init(); - else if (cpu_is_am33xx()) + else if (soc_is_am33xx()) am33xx_sram_init(); else if (cpu_is_omap34xx()) omap34xx_sram_init(); diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c deleted file mode 100644 index daa0327381b5..000000000000 --- a/arch/arm/plat-omap/usb.c +++ /dev/null @@ -1,145 +0,0 @@ - /* - * arch/arm/plat-omap/usb.c -- platform level USB initialization - * - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#undef DEBUG - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <plat/usb.h> -#include <plat/board.h> - -#include <mach/hardware.h> - -#ifdef CONFIG_ARCH_OMAP_OTG - -void __init -omap_otg_init(struct omap_usb_config *config) -{ - u32 syscon; - int alt_pingroup = 0; - - /* NOTE: no bus or clock setup (yet?) */ - - syscon = omap_readl(OTG_SYSCON_1) & 0xffff; - if (!(syscon & OTG_RESET_DONE)) - pr_debug("USB resets not complete?\n"); - - //omap_writew(0, OTG_IRQ_EN); - - /* pin muxing and transceiver pinouts */ - if (config->pins[0] > 2) /* alt pingroup 2 */ - alt_pingroup = 1; - syscon |= config->usb0_init(config->pins[0], is_usb0_device(config)); - syscon |= config->usb1_init(config->pins[1]); - syscon |= config->usb2_init(config->pins[2], alt_pingroup); - pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1)); - omap_writel(syscon, OTG_SYSCON_1); - - syscon = config->hmc_mode; - syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */; -#ifdef CONFIG_USB_OTG - if (config->otg) - syscon |= OTG_EN; -#endif - if (cpu_class_is_omap1()) - pr_debug("USB_TRANSCEIVER_CTRL = %03x\n", - omap_readl(USB_TRANSCEIVER_CTRL)); - pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2)); - omap_writel(syscon, OTG_SYSCON_2); - - printk("USB: hmc %d", config->hmc_mode); - if (!alt_pingroup) - printk(", usb2 alt %d wires", config->pins[2]); - else if (config->pins[0]) - printk(", usb0 %d wires%s", config->pins[0], - is_usb0_device(config) ? " (dev)" : ""); - if (config->pins[1]) - printk(", usb1 %d wires", config->pins[1]); - if (!alt_pingroup && config->pins[2]) - printk(", usb2 %d wires", config->pins[2]); - if (config->otg) - printk(", Mini-AB on usb%d", config->otg - 1); - printk("\n"); - - if (cpu_class_is_omap1()) { - u16 w; - - /* leave USB clocks/controllers off until needed */ - w = omap_readw(ULPD_SOFT_REQ); - w &= ~SOFT_USB_CLK_REQ; - omap_writew(w, ULPD_SOFT_REQ); - - w = omap_readw(ULPD_CLOCK_CTRL); - w &= ~USB_MCLK_EN; - w |= DIS_USB_PVCI_CLK; - omap_writew(w, ULPD_CLOCK_CTRL); - } - syscon = omap_readl(OTG_SYSCON_1); - syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN; - -#ifdef CONFIG_USB_GADGET_OMAP - if (config->otg || config->register_dev) { - struct platform_device *udc_device = config->udc_device; - int status; - - syscon &= ~DEV_IDLE_EN; - udc_device->dev.platform_data = config; - status = platform_device_register(udc_device); - if (status) - pr_debug("can't register UDC device, %d\n", status); - } -#endif - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - if (config->otg || config->register_host) { - struct platform_device *ohci_device = config->ohci_device; - int status; - - syscon &= ~HST_IDLE_EN; - ohci_device->dev.platform_data = config; - status = platform_device_register(ohci_device); - if (status) - pr_debug("can't register OHCI device, %d\n", status); - } -#endif - -#ifdef CONFIG_USB_OTG - if (config->otg) { - struct platform_device *otg_device = config->otg_device; - int status; - - syscon &= ~OTG_IDLE_EN; - otg_device->dev.platform_data = config; - status = platform_device_register(otg_device); - if (status) - pr_debug("can't register OTG device, %d\n", status); - } -#endif - pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1)); - omap_writel(syscon, OTG_SYSCON_1); -} - -#else -void omap_otg_init(struct omap_usb_config *config) {} -#endif |