diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale')
13 files changed, 53 insertions, 38 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts index 40d34c8384a5..b949cac03742 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts @@ -25,7 +25,6 @@ &enetc_port0 { phy-handle = <&slot1_sgmii>; phy-mode = "2500base-x"; - managed = "in-band-status"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts index c97f4e06ae5f..32f6f2f50c10 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts @@ -152,11 +152,11 @@ * CPLD_reset is RESET_SOFT in schematic */ gpio-line-names = - "CPLD_D[1]", "CPLD_int", "CPLD_reset", "", - "", "CPLD_D[0]", "", "", - "", "", "", "CPLD_D[2]", - "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]", "CPLD_D[6]", - "CPLD_D[7]", "", "", "", + "CPLD_D[6]", "CPLD_int", "CPLD_reset", "", + "", "CPLD_D[7]", "", "", + "", "", "", "CPLD_D[5]", + "CPLD_D[4]", "CPLD_D[3]", "CPLD_D[2]", "CPLD_D[1]", + "CPLD_D[0]", "", "", "", "", "", "", "", "", "", "", "KBD_intK", "", "", "", ""; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts index 286d2df01cfa..7e0aeb2db305 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts @@ -5,7 +5,6 @@ /dts-v1/; -#include <dt-bindings/phy/phy-imx8-pcie.h> #include "imx8mm-tqma8mqml.dtsi" #include "mba8mx.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi index 16ee9b5179e6..f649dfacb4b6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi @@ -3,6 +3,7 @@ * Copyright 2020-2021 TQ-Systems GmbH */ +#include <dt-bindings/phy/phy-imx8-pcie.h> #include "imx8mm.dtsi" / { diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index 35fb929e7bcc..d3ee6fc4baab 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -626,24 +626,28 @@ lan1: port@0 { reg = <0>; label = "lan1"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan2: port@1 { reg = <1>; label = "lan2"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan3: port@2 { reg = <2>; label = "lan3"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan4: port@3 { reg = <3>; label = "lan4"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index d1b4582f44c4..3ec0c9ac3170 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -32,10 +32,10 @@ }; /* Fixed clock dedicated to SPI CAN controller */ - clk20m: oscillator { + clk40m: oscillator { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <20000000>; + clock-frequency = <40000000>; }; gpio-keys { @@ -202,8 +202,8 @@ can1: can@0 { compatible = "microchip,mcp251xfd"; - clocks = <&clk20m>; - interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_FALLING>; + clocks = <&clk40m>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1_int>; reg = <0>; @@ -367,8 +367,8 @@ nxp,dvs-standby-voltage = <850000>; regulator-always-on; regulator-boot-on; - regulator-max-microvolt = <950000>; - regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <805000>; regulator-name = "On-module +VDD_ARM (BUCK2)"; regulator-ramp-delay = <3125>; }; @@ -376,8 +376,8 @@ reg_vdd_dram: BUCK3 { regulator-always-on; regulator-boot-on; - regulator-max-microvolt = <950000>; - regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <805000>; regulator-name = "On-module +VDD_GPU_VPU_DDR (BUCK3)"; }; @@ -416,7 +416,7 @@ reg_vdd_snvs: LDO2 { regulator-always-on; regulator-boot-on; - regulator-max-microvolt = <900000>; + regulator-max-microvolt = <800000>; regulator-min-microvolt = <800000>; regulator-name = "On-module +V0.8_SNVS (LDO2)"; }; @@ -603,7 +603,7 @@ pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>; reg = <0x4a>; /* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */ - reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; status = "disabled"; }; @@ -745,6 +745,7 @@ }; &usbphynop2 { + power-domains = <&pgc_otg2>; vcc-supply = <®_vdd_3v3>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 0c71b740a316..cb2836bfbd95 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -672,7 +672,6 @@ <&clk IMX8MN_CLK_GPU_SHADER>, <&clk IMX8MN_CLK_GPU_BUS_ROOT>, <&clk IMX8MN_CLK_GPU_AHB>; - resets = <&src IMX8MQ_RESET_GPU_RESET>; }; pgc_dispmix: power-domain@3 { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi index a616eb378002..0f13ee362771 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi @@ -70,7 +70,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; status = "disabled"; }; @@ -403,8 +403,8 @@ pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c5>; pinctrl-1 = <&pinctrl_i2c5_gpio>; - scl-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; @@ -648,10 +648,10 @@ pinctrl_ecspi1: dhcom-ecspi1-grp { fsl,pins = < - MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x44 - MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x44 - MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x44 - MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40 + MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK 0x44 + MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI 0x44 + MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO 0x44 + MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x40 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index d8ca52976170..0e237b2f9541 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -57,13 +57,13 @@ switch-1 { label = "S12"; linux,code = <BTN_0>; - gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; + gpios = <&gpio5 27 GPIO_ACTIVE_LOW>; }; switch-2 { label = "S13"; linux,code = <BTN_1>; - gpios = <&gpio5 27 GPIO_ACTIVE_LOW>; + gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; }; }; @@ -394,6 +394,8 @@ &pcf85063 { /* RTC_EVENT# is connected on MBa8MPxL */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcf85063>; interrupt-parent = <&gpio4>; interrupts = <28 IRQ_TYPE_EDGE_FALLING>; }; @@ -630,6 +632,10 @@ fsl,pins = <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x10>; /* Power enable */ }; + pinctrl_pcf85063: pcf85063grp { + fsl,pins = <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x80>; + }; + /* LVDS Backlight */ pinctrl_pwm2: pwm2grp { fsl,pins = <MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT 0x14>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts index 521215520a0f..211e6a1b296e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -123,8 +123,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_can>; regulator-name = "can2_stby"; - gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; - enable-active-high; + gpio = <&gpio3 19 GPIO_ACTIVE_LOW>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; @@ -484,35 +483,40 @@ lan1: port@0 { reg = <0>; label = "lan1"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan2: port@1 { reg = <1>; label = "lan2"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan3: port@2 { reg = <2>; label = "lan3"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan4: port@3 { reg = <3>; label = "lan4"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan5: port@4 { reg = <4>; label = "lan5"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; - port@6 { - reg = <6>; + port@5 { + reg = <5>; label = "cpu"; ethernet = <&fec>; phy-mode = "rgmii-id"; @@ -770,10 +774,10 @@ pinctrl_sai2: sai2grp { fsl,pins = < - MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC - MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 - MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK - MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK + MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6 + MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6 + MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK 0xd6 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi index c5987bdbb383..1c74c6a19449 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi @@ -628,7 +628,7 @@ interrupts = <5 IRQ_TYPE_EDGE_FALLING>; reg = <0x4a>; /* Verdin GPIO_2 (SODIMM 208) */ - reset-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; status = "disabled"; }; }; @@ -705,7 +705,7 @@ pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>; reg = <0x4a>; /* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */ - reset-gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi index 899e8e7dbc24..802ad6e5cef6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi @@ -204,7 +204,6 @@ reg = <0x51>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rtc>; - interrupt-names = "irq"; interrupt-parent = <&gpio1>; interrupts = <1 IRQ_TYPE_EDGE_FALLING>; quartz-load-femtofarads = <7000>; diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi index 60c1b018bf03..bb56390b8f54 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi @@ -172,6 +172,7 @@ compatible = "fsl,imx8ulp-pcc3"; reg = <0x292d0000 0x10000>; #clock-cells = <1>; + #reset-cells = <1>; }; tpm5: tpm@29340000 { @@ -270,6 +271,7 @@ compatible = "fsl,imx8ulp-pcc4"; reg = <0x29800000 0x10000>; #clock-cells = <1>; + #reset-cells = <1>; }; lpi2c6: i2c@29840000 { @@ -414,6 +416,7 @@ compatible = "fsl,imx8ulp-pcc5"; reg = <0x2da70000 0x10000>; #clock-cells = <1>; + #reset-cells = <1>; }; }; |