diff options
Diffstat (limited to 'arch/arm64/boot/dts/marvell')
| -rw-r--r-- | arch/arm64/boot/dts/marvell/Makefile | 4 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts | 27 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 6 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/marvell/armada-7040-db.dts | 5 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/marvell/armada-8040-db.dts | 10 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 70 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 1 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts | 66 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/marvell/berlin4ct-stb.dts | 66 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 351 |
10 files changed, 119 insertions, 487 deletions
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index cb454beede55..ea9d49f2a911 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -1,8 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -# Berlin SoC Family -dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb -dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb - # Mvebu SoC Family dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts index ef7fd2ca2515..3ab25ad402b9 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts @@ -63,6 +63,33 @@ status = "okay"; }; +&spi0 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "winbond,w25q32dw", "jedec,spi-flash"; + spi-max-frequency = <104000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0 0x180000>; + }; + + partition@180000 { + label = "ubootenv"; + reg = <0x180000 0x10000>; + }; + }; + }; +}; + /* Exported on the micro USB connector J5 through an FTDI */ &uart0 { pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 97207a61bc79..3353252d78a0 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -148,10 +148,13 @@ compatible = "marvell,armada3710-nb-pinctrl", "syscon", "simple-mfd"; reg = <0x13800 0x100>, <0x13C00 0x20>; + /* MPP1[19:0] */ gpionb: gpio { #gpio-cells = <2>; gpio-ranges = <&pinctrl_nb 0 0 36>; gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, @@ -209,10 +212,13 @@ compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd"; reg = <0x18800 0x100>, <0x18C00 0x20>; + /* MPP2[23:0] */ gpiosb: gpio { #gpio-cells = <2>; gpio-ranges = <&pinctrl_sb 0 0 30>; gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index d6bec058a30a..412efdb46e7c 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -242,6 +242,11 @@ phy-mode = "10gbase-kr"; /* Generic PHY, providing serdes lanes */ phys = <&cp0_comphy2 0>; + + fixed-link { + speed = <10000>; + full-duplex; + }; }; &cp0_eth1 { diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index 5689fb23bbab..1bac437369a1 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -177,6 +177,11 @@ &cp0_eth0 { status = "okay"; phy-mode = "10gbase-kr"; + + fixed-link { + speed = <10000>; + full-duplex; + }; }; &cp0_eth2 { @@ -303,6 +308,11 @@ &cp1_eth0 { status = "okay"; phy-mode = "10gbase-kr"; + + fixed-link { + speed = <10000>; + full-duplex; + }; }; &cp1_eth1 { diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts index 81de03ef860d..a66958ff4de6 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts @@ -27,6 +27,7 @@ ethernet0 = &cp0_eth0; ethernet1 = &cp1_eth0; ethernet2 = &cp1_eth1; + ethernet3 = &cp1_eth2; }; /* Regulator labels correspond with schematics */ @@ -64,6 +65,42 @@ compatible = "usb-nop-xceiv"; vcc-supply = <&v_5v0_usb3_hst_vbus>; }; + + sfp_eth0: sfp-eth0 { + /* CON15,16 - CPM lane 4 */ + compatible = "sff,sfp"; + i2c-bus = <&sfpp0_i2c>; + los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfpp0_pins>; + }; + + sfp_eth1: sfp-eth1 { + /* CON17,18 - CPS lane 4 */ + compatible = "sff,sfp"; + i2c-bus = <&sfpp1_i2c>; + los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>; + }; + + sfp_eth3: sfp-eth3 { + /* CON3,4 - CPS lane 5 */ + compatible = "sff,sfp"; + i2c-bus = <&sfp_1g_i2c>; + los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>; + }; }; &uart0 { @@ -171,6 +208,10 @@ marvell,pins = "mpp47"; marvell,function = "gpio"; }; + cp0_sfp_1g_pins: sfp-1g-pins { + marvell,pins = "mpp51", "mpp53", "mpp54"; + marvell,function = "gpio"; + }; cp0_pcie_pins: pcie-pins { marvell,pins = "mpp52"; marvell,function = "gpio"; @@ -180,6 +221,10 @@ "mpp60", "mpp61"; marvell,function = "sdio"; }; + cp0_sfpp1_pins: sfpp1-pins { + marvell,pins = "mpp62"; + marvell,function = "gpio"; + }; }; &cp0_xmdio { @@ -188,11 +233,13 @@ phy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c45"; reg = <0>; + sfp = <&sfp_eth0>; }; phy8: ethernet-phy@8 { compatible = "ethernet-phy-ieee802.3-c45"; reg = <8>; + sfp = <&sfp_eth1>; }; }; @@ -257,7 +304,22 @@ phys = <&cp1_comphy0 1>; }; +&cp1_eth2 { + /* CPS Lane 5 */ + status = "okay"; + /* Network PHY */ + phy-mode = "2500base-x"; + managed = "in-band-status"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy5 2>; + sfp = <&sfp_eth3>; +}; + &cp1_pinctrl { + cp1_sfpp1_pins: sfpp1-pins { + marvell,pins = "mpp8", "mpp10", "mpp11"; + marvell,function = "gpio"; + }; cp1_spi1_pins: spi1-pins { marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16"; marvell,function = "spi1"; @@ -266,6 +328,14 @@ marvell,pins = "mpp6", "mpp7"; marvell,function = "uart0"; }; + cp1_sfp_1g_pins: sfp-1g-pins { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + cp1_sfpp0_pins: sfpp0-pins { + marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29"; + marvell,function = "gpio"; + }; }; /* J27 UART header */ diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index ed2f1237ea1e..7dabe25f6774 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -236,6 +236,7 @@ compatible = "marvell,armada-8k-ahci", "generic-ahci"; reg = <0x540000 0x30000>; + dma-coherent; interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&CP110_LABEL(clk) 1 15>, <&CP110_LABEL(clk) 1 16>; diff --git a/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts b/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts deleted file mode 100644 index fae6c6924705..000000000000 --- a/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Copyright (C) 2015 Marvell Technology Group Ltd. - * - * Author: Jisheng Zhang <jszhang@marvell.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; - -#include "berlin4ct.dtsi" - -/ { - model = "Marvell BG4CT DMP board"; - compatible = "marvell,berlin4ct-dmp", "marvell,berlin4ct", "marvell,berlin"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@1000000 { - device_type = "memory"; - /* the first 16MB is for firmwares' usage */ - reg = <0 0x01000000 0 0x7f000000>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts b/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts deleted file mode 100644 index d47edad13e68..000000000000 --- a/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Copyright (C) 2015 Marvell Technology Group Ltd. - * - * Author: Jisheng Zhang <jszhang@marvell.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; - -#include "berlin4ct.dtsi" - -/ { - model = "Marvell BG4CT STB board"; - compatible = "marvell,berlin4ct-stb", "marvell,berlin4ct", "marvell,berlin"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@1000000 { - device_type = "memory"; - /* the first 16MB is for firmwares' usage */ - reg = <0 0x01000000 0 0x7f000000>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi deleted file mode 100644 index d2f88b92d8e2..000000000000 --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi +++ /dev/null @@ -1,351 +0,0 @@ -/* - * Copyright (C) 2015 Marvell Technology Group Ltd. - * - * Author: Jisheng Zhang <jszhang@marvell.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#include <dt-bindings/interrupt-controller/arm-gic.h> - -/ { - compatible = "marvell,berlin4ct", "marvell,berlin"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - serial0 = &uart0; - }; - - psci { - compatible = "arm,psci-1.0", "arm,psci-0.2"; - method = "smc"; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; - device_type = "cpu"; - reg = <0x0>; - enable-method = "psci"; - next-level-cache = <&l2>; - cpu-idle-states = <&CPU_SLEEP_0>; - }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; - device_type = "cpu"; - reg = <0x1>; - enable-method = "psci"; - next-level-cache = <&l2>; - cpu-idle-states = <&CPU_SLEEP_0>; - }; - - cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; - device_type = "cpu"; - reg = <0x2>; - enable-method = "psci"; - next-level-cache = <&l2>; - cpu-idle-states = <&CPU_SLEEP_0>; - }; - - cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; - device_type = "cpu"; - reg = <0x3>; - enable-method = "psci"; - next-level-cache = <&l2>; - cpu-idle-states = <&CPU_SLEEP_0>; - }; - - l2: cache { - compatible = "cache"; - }; - - idle-states { - entry-method = "psci"; - CPU_SLEEP_0: cpu-sleep-0 { - compatible = "arm,idle-state"; - local-timer-stop; - arm,psci-suspend-param = <0x0010000>; - entry-latency-us = <75>; - exit-latency-us = <155>; - min-residency-us = <1000>; - }; - }; - }; - - osc: osc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - pmu { - compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3"; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, - <&cpu1>, - <&cpu2>, - <&cpu3>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - - soc@f7000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0xf7000000 0x1000000>; - - gic: interrupt-controller@901000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x901000 0x1000>, - <0x902000 0x2000>, - <0x904000 0x2000>, - <0x906000 0x2000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - }; - - apb@e80000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - - ranges = <0 0xe80000 0x10000>; - interrupt-parent = <&aic>; - - gpio0: gpio@400 { - compatible = "snps,dw-apb-gpio"; - reg = <0x0400 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - porta: gpio-port@0 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0>; - }; - }; - - gpio1: gpio@800 { - compatible = "snps,dw-apb-gpio"; - reg = <0x0800 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - portb: gpio-port@1 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <1>; - }; - }; - - gpio2: gpio@c00 { - compatible = "snps,dw-apb-gpio"; - reg = <0x0c00 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - portc: gpio-port@2 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <2>; - }; - }; - - gpio3: gpio@1000 { - compatible = "snps,dw-apb-gpio"; - reg = <0x1000 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - portd: gpio-port@3 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <3>; - }; - }; - - aic: interrupt-controller@3800 { - compatible = "snps,dw-apb-ictl"; - reg = <0x3800 0x30>; - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - soc_pinctrl: pin-controller@ea8000 { - compatible = "marvell,berlin4ct-soc-pinctrl"; - reg = <0xea8000 0x14>; - }; - - avio_pinctrl: pin-controller@ea8400 { - compatible = "marvell,berlin4ct-avio-pinctrl"; - reg = <0xea8400 0x8>; - }; - - apb@fc0000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0xfc0000 0x10000>; - interrupt-parent = <&sic>; - - sic: interrupt-controller@1000 { - compatible = "snps,dw-apb-ictl"; - reg = <0x1000 0x30>; - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - }; - - wdt0: watchdog@3000 { - compatible = "snps,dw-wdt"; - reg = <0x3000 0x100>; - clocks = <&osc>; - interrupts = <0>; - }; - - wdt1: watchdog@4000 { - compatible = "snps,dw-wdt"; - reg = <0x4000 0x100>; - clocks = <&osc>; - interrupts = <1>; - }; - - wdt2: watchdog@5000 { - compatible = "snps,dw-wdt"; - reg = <0x5000 0x100>; - clocks = <&osc>; - interrupts = <2>; - }; - - sm_gpio0: gpio@8000 { - compatible = "snps,dw-apb-gpio"; - reg = <0x8000 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - porte: gpio-port@4 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - }; - }; - - sm_gpio1: gpio@9000 { - compatible = "snps,dw-apb-gpio"; - reg = <0x9000 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - portf: gpio-port@5 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - }; - }; - - uart0: uart@d000 { - compatible = "snps,dw-apb-uart"; - reg = <0xd000 0x100>; - interrupts = <8>; - clocks = <&osc>; - reg-shift = <2>; - status = "disabled"; - pinctrl-0 = <&uart0_pmux>; - pinctrl-names = "default"; - }; - }; - - system_pinctrl: pin-controller@fe2200 { - compatible = "marvell,berlin4ct-system-pinctrl"; - reg = <0xfe2200 0xc>; - - uart0_pmux: uart0-pmux { - groups = "SM_URT0_TXD", "SM_URT0_RXD"; - function = "uart0"; - }; - }; - }; -}; |