1 files changed, 18 insertions, 36 deletions

diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index 38ba809a95cd..1b7fdbae6a2b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -13,6 +13,7 @@
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
 #include "sdm845.dtsi"
+#include "sdm845-wcd9340.dtsi"
 #include "pm8998.dtsi"
 #include "pmi8998.dtsi"
 #include "pm8005.dtsi"
@@ -55,7 +56,7 @@
 		key-vol-up {
 			label = "Volume Up";
 			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 			debounce-interval = <15>;
 		};
 	};
@@ -143,7 +144,7 @@
 };
 
 &apps_rsc {
-	pm8998-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8998-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -343,7 +344,7 @@
 		};
 	};
 
-	pmi8998-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pmi8998-rpmh-regulators";
 		qcom,pmic-id = "b";
 
@@ -355,7 +356,7 @@
 		};
 	};
 
-	pm8005-rpmh-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8005-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -449,6 +450,7 @@
 };
 
 &ipa {
+	qcom,gsi-loader = "self";
 	memory-region = <&ipa_fw_mem>;
 	firmware-name = "qcom/sdm845/polaris/ipa_fws.mbn";
 	status = "okay";
@@ -518,7 +520,7 @@
 	status = "okay";
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	volume_up_gpio: pm8998-gpio6-state {
 		pinconf {
 			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
@@ -530,14 +532,9 @@
 	};
 };
 
-&pm8998_pon {
-	resin {
-		interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-		compatible = "qcom,pm8941-resin";
-		linux,code = <KEY_VOLUMEDOWN>;
-		debounce = <15625>;
-		bias-pull-up;
-	};
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &q6afedai {
@@ -570,24 +567,21 @@
 };
 
 &qup_i2c14_default {
-	pinconf {
-		pins = "gpio33", "gpio34";
-		drive-strength = <2>;
-		bias-disable;
-	};
+	drive-strength = <2>;
+	bias-disable;
 };
 
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
-	ts_reset_default: ts-reset-default {
+	ts_reset_default: ts-reset-default-state {
 		pins = "gpio99";
 		function = "gpio";
 		drive-strength = <16>;
 		output-high;
 	};
 
-	ts_int_default: ts-int-default {
+	ts_int_default: ts-int-default-state {
 		pins = "gpio125";
 		function = "gpio";
 		bias-pull-down;
@@ -595,14 +589,14 @@
 		input-enable;
 	};
 
-	ts_reset_sleep: ts-reset-sleep {
+	ts_reset_sleep: ts-reset-sleep-state {
 		pins = "gpio99";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	ts_int_sleep: ts-int-sleep {
+	ts_int_sleep: ts-int-sleep-state {
 		pins = "gpio125";
 		function = "gpio";
 		bias-pull-down;
@@ -610,27 +604,19 @@
 		input-enable;
 	};
 
-	sde_dsi_active: sde-dsi-active {
+	sde_dsi_active: sde-dsi-active-state {
 		pins = "gpio6", "gpio10";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-disable;
 	};
 
-	sde_dsi_suspend: sde-dsi-suspend {
+	sde_dsi_suspend: sde-dsi-suspend-state {
 		pins = "gpio6", "gpio10";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-pull-down;
 	};
-
-	wcd_intr_default: wcd-intr-default {
-		pins = "gpio54";
-		function = "gpio";
-		input-enable;
-		bias-pull-down;
-		drive-strength = <2>;
-	};
 };
 
 &uart6 {
@@ -707,10 +693,6 @@
 };
 
 &wcd9340 {
-	pinctrl-0 = <&wcd_intr_default>;
-	pinctrl-names = "default";
-	clock-names = "extclk";
-	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
 	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
 	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
 	vdd-buck-supply = <&vreg_s4a_1p8>;