diff options
Diffstat (limited to 'arch/arm64/boot')
19 files changed, 2697 insertions, 134 deletions
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 38913be23695..1560478d6eb2 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -1,12 +1,14 @@ dts-dirs += amd dts-dirs += apm dts-dirs += arm +dts-dirs += broadcom dts-dirs += cavium dts-dirs += exynos dts-dirs += freescale dts-dirs += hisilicon dts-dirs += mediatek dts-dirs += qcom +dts-dirs += rockchip dts-dirs += sprd dts-dirs += xilinx diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts index 83578e766b94..4c55833d8a41 100644 --- a/arch/arm64/boot/dts/apm/apm-mustang.dts +++ b/arch/arm64/boot/dts/apm/apm-mustang.dts @@ -23,6 +23,16 @@ device_type = "memory"; reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */ }; + + gpio-keys { + compatible = "gpio-keys"; + button@1 { + label = "POWER"; + linux,code = <116>; + linux,input-type = <0x1>; + interrupts = <0x0 0x2d 0x1>; + }; + }; }; &pcie0clk { diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile index c5c98b91514e..bb3c07209676 100644 --- a/arch/arm64/boot/dts/arm/Makefile +++ b/arch/arm64/boot/dts/arm/Makefile @@ -1,6 +1,7 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts new file mode 100644 index 000000000000..5b1d0181023b --- /dev/null +++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts @@ -0,0 +1,191 @@ +/* + * ARM Ltd. Versatile Express + * + * LogicTile Express 20MG + * V2F-1XV7 + * + * Cortex-A53 (2 cores) Soft Macrocell Model + * + * HBI-0247C + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "V2F-1XV7 Cortex-A53x2 SMM"; + arm,hbi = <0x247>; + arm,vexpress,site = <0xf>; + compatible = "arm,vexpress,v2f-1xv7,ca53x2", "arm,vexpress,v2f-1xv7", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { + stdout-path = "serial0:38400n8"; + }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + i2c0 = &v2m_i2c_dvi; + i2c1 = &v2m_i2c_pcie; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0 0>; + next-level-cache = <&L2_0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0 1>; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x80000000>; /* 2GB @ 2GB */ + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x2000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + smbclk: osc@4 { + /* SMC clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 4>; + freq-range = <40000000 40000000>; + #clock-cells = <0>; + clock-output-names = "smclk"; + }; + + volt@0 { + /* VIO to expansion board above */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 0>; + regulator-name = "VIO_UP"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + volt@1 { + /* 12V from power connector J6 */ + compatible = "arm,vexpress-volt"; + arm,vexpress-sysreg,func = <2 1>; + regulator-name = "12"; + regulator-always-on; + }; + + temp@0 { + /* FPGA temperature */ + compatible = "arm,vexpress-temp"; + arm,vexpress-sysreg,func = <4 0>; + label = "FPGA"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <0 0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <0 0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <0 0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <0 0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <0 0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <0 0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <0 0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <0 0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <0 0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <0 0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <0 0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <0 0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <0 0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <0 0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <0 0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <0 0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <0 0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <0 0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <0 0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <0 0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <0 0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <0 0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <0 0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <0 0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <0 0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <0 0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <0 0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + + /include/ "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi" + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile new file mode 100644 index 000000000000..e21fe66f1837 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts new file mode 100644 index 000000000000..244baf879dc9 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts @@ -0,0 +1,59 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "ns2.dtsi" + +/ { + model = "Broadcom NS2 SVK"; + compatible = "brcm,ns2-svk", "brcm,ns2"; + + aliases { + serial0 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x000000000 0x80000000 0x00000000 0x40000000>; + }; + + soc: soc { + uart3: serial@66130000 { + status = "ok"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi new file mode 100644 index 000000000000..3c92d92278e5 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi @@ -0,0 +1,118 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/memreserve/ 0x84b00000 0x00000008; + +/ { + compatible = "brcm,ns2"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0 0>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x84b00000>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0 1>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x84b00000>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0 2>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x84b00000>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0 3>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x84b00000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) | + IRQ_TYPE_EDGE_RISING)>; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + gic: interrupt-controller@65210000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x65210000 0x1000>, + <0x65220000 0x1000>, + <0x65240000 0x2000>, + <0x65260000 0x1000>; + }; + + uart3: serial@66130000 { + compatible = "snps,dw-apb-uart"; + reg = <0x66130000 0x100>; + interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <23961600>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi index d8c0bdc51882..9cb7cf94284a 100644 --- a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi +++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi @@ -376,10 +376,19 @@ gic0: interrupt-controller@8010,00000000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; interrupt-controller; reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */ <0x8010 0x80000000 0x0 0x600000>; /* GICR */ interrupts = <1 9 0xf04>; + + its: gic-its@8010,00020000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x8010 0x20000 0x0 0x200000>; + }; }; uaa0: serial@87e0,24000000 { diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi index 535532b9287f..e03c11d9d834 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi @@ -2,27 +2,37 @@ &pm8916_gpios { - pinctrl-names = "default"; - pinctrl-0 = <&pm8916_gpios_default>; - - pm8916_gpios_default: default { - usb_hub_reset_pm { - pins = "gpio1"; + usb_hub_reset_pm: usb_hub_reset_pm { + pinconf { + pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; output-low; }; - usb_sw_sel_pm { - pins = "gpio2"; + }; + + usb_sw_sel_pm: usb_sw_sel_pm { + pinconf { + pins = "gpio4"; function = PMIC_GPIO_FUNC_NORMAL; + power-source = <PM8916_GPIO_VPH>; input-disable; }; - usr_led_3_ctrl { - pins = "gpio3"; + }; + + pm8916_gpios_leds: pm8916_gpios_leds { + pinconf { + pins = "gpio1", "gpio2"; function = PMIC_GPIO_FUNC_NORMAL; output-low; }; - usr_led_4_ctrl { - pins = "gpio4"; + }; +}; + +&pm8916_mpps { + + pm8916_mpps_leds: pm8916_mpps_leds { + pinconf { + pins = "mpp2", "mpp3"; function = PMIC_GPIO_FUNC_NORMAL; output-low; }; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi index 5f7023f90df7..cbeee0bcdf52 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi @@ -3,17 +3,9 @@ &msmgpio { - pinctrl-names = "default"; - pinctrl-0 = <&soc_gpios_default>; - - soc_gpios_default: default { - usr_led_1_ctrl_default: usr_led_1_ctrl_default { - pins = "gpio21"; - function = "gpio"; - output-low; - }; - usr_led_2_ctrl_default: usr_led_2_ctrl_default { - pins = "gpio120"; + msmgpio_leds: msmgpio_leds { + pinconf { + pins = "gpio21", "gpio120"; function = "gpio"; output-low; }; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 98abece6b233..66804ffbc6d2 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -32,5 +32,56 @@ pinctrl-0 = <&blsp1_uart2_default>; pinctrl-1 = <&blsp1_uart2_sleep>; }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&msmgpio_leds>, + <&pm8916_gpios_leds>, + <&pm8916_mpps_leds>; + + compatible = "gpio-leds"; + + led@1 { + label = "apq8016-sbc:green:user1"; + gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@2 { + label = "apq8016-sbc:green:user2"; + gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@3 { + label = "apq8016-sbc:green:user3"; + gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led@4 { + label = "apq8016-sbc:green:user4"; + gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + led@5 { + label = "apq8016-sbc:yellow:wlan"; + gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "wlan"; + default-state = "off"; + }; + + led@6 { + label = "apq8016-sbc:blue:bt"; + gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bt"; + default-state = "off"; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi new file mode 100644 index 000000000000..568956859088 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -0,0 +1,430 @@ +/* + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +&msmgpio { + + blsp1_uart2_default: blsp1_uart2_default { + pinmux { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + }; + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <16>; + bias-disable; + }; + }; + + blsp1_uart2_sleep: blsp1_uart2_sleep { + pinmux { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + }; + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi1_default: spi1_default { + pinmux { + function = "blsp_spi1"; + pins = "gpio0", "gpio1", "gpio3"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio2"; + }; + pinconf { + pins = "gpio0", "gpio1", "gpio3"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio2"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + spi1_sleep: spi1_sleep { + pinmux { + function = "gpio"; + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + }; + pinconf { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi2_default: spi2_default { + pinmux { + function = "blsp_spi2"; + pins = "gpio4", "gpio5", "gpio7"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio6"; + }; + pinconf { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio6"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + spi2_sleep: spi2_sleep { + pinmux { + function = "gpio"; + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + }; + pinconf { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi3_default: spi3_default { + pinmux { + function = "blsp_spi3"; + pins = "gpio8", "gpio9", "gpio11"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio10"; + }; + pinconf { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio10"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + spi3_sleep: spi3_sleep { + pinmux { + function = "gpio"; + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + }; + pinconf { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi4_default: spi4_default { + pinmux { + function = "blsp_spi4"; + pins = "gpio12", "gpio13", "gpio15"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio14"; + }; + pinconf { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio14"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + spi4_sleep: spi4_sleep { + pinmux { + function = "gpio"; + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + }; + pinconf { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi5_default: spi5_default { + pinmux { + function = "blsp_spi5"; + pins = "gpio16", "gpio17", "gpio19"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio18"; + }; + pinconf { + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio18"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + spi5_sleep: spi5_sleep { + pinmux { + function = "gpio"; + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + }; + pinconf { + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi6_default: spi6_default { + pinmux { + function = "blsp_spi6"; + pins = "gpio20", "gpio21", "gpio23"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio22"; + }; + pinconf { + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio22"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + spi6_sleep: spi6_sleep { + pinmux { + function = "gpio"; + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + }; + pinconf { + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + i2c4_default: i2c4_default { + pinmux { + function = "blsp_i2c4"; + pins = "gpio14", "gpio15"; + }; + pinconf { + pins = "gpio14", "gpio15"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + i2c4_sleep: i2c4_sleep { + pinmux { + function = "blsp_i2c4"; + pins = "gpio14", "gpio15"; + }; + pinconf { + pins = "gpio14", "gpio15"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + sdhc2_cd_pin { + sdc2_cd_on: cd_on { + pinmux { + function = "gpio"; + pins = "gpio38"; + }; + pinconf { + pins = "gpio38"; + drive-strength = <2>; + bias-pull-up; + }; + }; + sdc2_cd_off: cd_off { + pinmux { + function = "gpio"; + pins = "gpio38"; + }; + pinconf { + pins = "gpio38"; + drive-strength = <2>; + bias-disable; + }; + }; + }; + + pmx_sdc1_clk { + sdc1_clk_on: clk_on { + pinmux { + pins = "sdc1_clk"; + }; + pinconf { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + }; + sdc1_clk_off: clk_off { + pinmux { + pins = "sdc1_clk"; + }; + pinconf { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + }; + }; + + pmx_sdc1_cmd { + sdc1_cmd_on: cmd_on { + pinmux { + pins = "sdc1_cmd"; + }; + pinconf { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + }; + sdc1_cmd_off: cmd_off { + pinmux { + pins = "sdc1_cmd"; + }; + pinconf { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; + + pmx_sdc1_data { + sdc1_data_on: data_on { + pinmux { + pins = "sdc1_data"; + }; + pinconf { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + sdc1_data_off: data_off { + pinmux { + pins = "sdc1_data"; + }; + pinconf { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; + + pmx_sdc2_clk { + sdc2_clk_on: clk_on { + pinmux { + pins = "sdc2_clk"; + }; + pinconf { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + }; + sdc2_clk_off: clk_off { + pinmux { + pins = "sdc2_clk"; + }; + pinconf { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + }; + }; + + pmx_sdc2_cmd { + sdc2_cmd_on: cmd_on { + pinmux { + pins = "sdc2_cmd"; + }; + pinconf { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + }; + sdc2_cmd_off: cmd_off { + pinmux { + pins = "sdc2_cmd"; + }; + pinconf { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; + + pmx_sdc2_data { + sdc2_data_on: data_on { + pinmux { + pins = "sdc2_data"; + }; + pinconf { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + sdc2_data_off: data_off { + pinmux { + pins = "sdc2_data"; + }; + pinconf { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 0f49ebd0aa8b..5911de008dd5 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -24,7 +24,10 @@ #address-cells = <2>; #size-cells = <2>; - aliases { }; + aliases { + sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ + sdhc2 = &sdhc_2; /* SDC2 SD card slot */ + }; chosen { }; @@ -90,30 +93,6 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - - blsp1_uart2_default: blsp1_uart2_default { - pinmux { - function = "blsp_uart2"; - pins = "gpio4", "gpio5"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <16>; - bias-disable; - }; - }; - - blsp1_uart2_sleep: blsp1_uart2_sleep { - pinmux { - function = "blsp_uart2"; - pins = "gpio4", "gpio5"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-pull-down; - }; - }; }; gcc: qcom,gcc@1800000 { @@ -132,6 +111,202 @@ status = "disabled"; }; + blsp_dma: dma@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x23000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + blsp_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 5>, <&blsp_dma 4>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi1_default>; + pinctrl-1 = <&spi1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi2: spi@78b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 7>, <&blsp_dma 6>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi2_default>; + pinctrl-1 = <&spi2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi3: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 9>, <&blsp_dma 8>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi3_default>; + pinctrl-1 = <&spi3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi4: spi@78b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b8000 0x600>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 11>, <&blsp_dma 10>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi4_default>; + pinctrl-1 = <&spi4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi5: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b9000 0x600>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 13>, <&blsp_dma 12>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi5_default>; + pinctrl-1 = <&spi5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi6: spi@78ba000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078ba000 0x600>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 15>, <&blsp_dma 14>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi6_default>; + pinctrl-1 = <&spi6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c4: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b8000 0x1000>; + interrupts = <GIC_SPI 98 0>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c4_default>; + pinctrl-1 = <&i2c4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + sdhc_1: sdhci@07824000 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x07824900 0x11c>, <0x07824000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <0 123 0>, <0 138 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + sdhc_2: sdhci@07864000 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x07864900 0x11c>, <0x07864000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <0 125 0>, <0 221 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>; + clock-names = "core", "iface"; + bus-width = <4>; + status = "disabled"; + }; + + usb_dev: usb@78d9000 { + compatible = "qcom,ci-hdrc"; + reg = <0x78d9000 0x400>; + dr_mode = "peripheral"; + interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>; + usb-phy = <&usb_otg>; + status = "disabled"; + }; + + usb_host: ehci@78d9000 { + compatible = "qcom,ehci-host"; + reg = <0x78d9000 0x400>; + interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>; + usb-phy = <&usb_otg>; + status = "disabled"; + }; + + usb_otg: phy@78d9000 { + compatible = "qcom,usb-otg-snps"; + reg = <0x78d9000 0x400>; + interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>, + <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>; + + qcom,vdd-levels = <1 5 7>; + qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>; + dr_mode = "peripheral"; + qcom,otg-control = <2>; // PMIC + + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "iface", "core", "sleep"; + + resets = <&gcc GCC_USB2A_PHY_BCR>, + <&gcc GCC_USB_HS_BCR>; + reset-names = "phy", "link"; + status = "disabled"; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; @@ -217,3 +392,5 @@ }; }; }; + +#include "msm8916-pins.dtsi" diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile new file mode 100644 index 000000000000..601e6a236c1d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts new file mode 100644 index 000000000000..401a81231eb9 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts @@ -0,0 +1,354 @@ +/* + * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3368.dtsi" + +/ { + model = "Rockchip R88"; + compatible = "rockchip,r88", "rockchip,rk3368"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&emmc_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + + button@0 { + gpio-key,wakeup = <1>; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <116>; + }; + }; + + leds: gpio-leds { + compatible = "gpio-leds"; + + work { + gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + label = "r88:green:led"; + pinctrl-names = "default"; + pinctrl-0 = <&led_ctl>; + }; + }; + + ir: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio3 30 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_rst>, <&wifi_reg_on>; + + reset-gpios = + /* BT_RST_N */ + <&gpio3 5 GPIO_ACTIVE_LOW>, + + /* WL_REG_ON */ + <&gpio3 4 GPIO_ACTIVE_LOW>; + }; + + vcc_18: vcc18-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + /* supplies both host and otg */ + vcc_host: vcc-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + vcc_io: vcc-io-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + vcc_lan: vcc-lan-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_lan"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vccio_wl: vccio-wl-regulator { + compatible = "regulator-fixed"; + regulator-name = "vccio_wl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vdd_10: vdd-10-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; +}; + +&emmc { + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + mmc-pwrseq = <&emmc_pwrseq>; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + status = "okay"; +}; + +&gmac { + phy-supply = <&vcc_lan>; + phy-mode = "rmii"; + clock_in_out = "output"; + snps,reset-gpio = <&gpio3 12 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: syr827@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-enable-ramp-delay = <300>; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <8000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + /* rtc_int is not connected */ + }; +}; + +&sdio0 { + assigned-clocks = <&cru SCLK_SDIO0>; + assigned-clock-parents = <&cru PLL_CPLL>; + broken-cd; + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vccio_wl>; + status = "okay"; +}; + +&pinctrl { + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + bias-disable; + drive-strength = <8>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + emmc { + emmc_bus8: emmc-bus8 { + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + }; + + emmc-clk { + rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + }; + + emmc-cmd { + rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + }; + + emmc_reset: emmc-reset { + rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + ir { + ir_int: ir-int { + rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + keys { + pwr_key: pwr-key { + rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + stby_pwren: stby-pwren { + rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + led_ctl: led-ctl { + rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio { + wifi_reg_on: wifi-reg-on { + rockchip,pins = <3 4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_rst: bt-rst { + rockchip,pins = <3 5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&vcc_18>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi new file mode 100644 index 000000000000..a712bea3bf2c --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -0,0 +1,900 @@ +/* + * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/clock/rk3368-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/rockchip.h> + +/ { + compatible = "rockchip,rk3368"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + }; + + cpus { + #address-cells = <0x2>; + #size-cells = <0x0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu_b0>; + }; + core1 { + cpu = <&cpu_b1>; + }; + core2 { + cpu = <&cpu_b2>; + }; + core3 { + cpu = <&cpu_b3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu_l0>; + }; + core1 { + cpu = <&cpu_l1>; + }; + core2 { + cpu = <&cpu_l2>; + }; + core3 { + cpu = <&cpu_l3>; + }; + }; + }; + + idle-states { + entry-method = "arm,psci"; + + cpu_sleep: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <0x3fffffff>; + exit-latency-us = <0x40000000>; + min-residency-us = <0xffffffff>; + }; + }; + + cpu_l0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + cpu-idle-states = <&cpu_sleep>; + enable-method = "psci"; + }; + + cpu_l1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + cpu-idle-states = <&cpu_sleep>; + enable-method = "psci"; + }; + + cpu_l2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + cpu-idle-states = <&cpu_sleep>; + enable-method = "psci"; + }; + + cpu_l3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + cpu-idle-states = <&cpu_sleep>; + enable-method = "psci"; + }; + + cpu_b0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x100>; + cpu-idle-states = <&cpu_sleep>; + enable-method = "psci"; + }; + + cpu_b1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x101>; + cpu-idle-states = <&cpu_sleep>; + enable-method = "psci"; + }; + + cpu_b2: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x102>; + cpu-idle-states = <&cpu_sleep>; + enable-method = "psci"; + }; + + cpu_b3: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x103>; + cpu-idle-states = <&cpu_sleep>; + enable-method = "psci"; + }; + }; + + arm-pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu_l0>, <&cpu_l1>, <&cpu_l2>, + <&cpu_l3>, <&cpu_b0>, <&cpu_b1>, + <&cpu_b2>, <&cpu_b3>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + xin24m: oscillator { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + sdmmc: dwmmc@ff0c0000 { + compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff0c0000 0x0 0x4000>; + clock-freq-min-max = <400000 150000000>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sdio0: dwmmc@ff0d0000 { + compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff0d0000 0x0 0x4000>; + clock-freq-min-max = <400000 150000000>; + clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>, + <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>; + clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + emmc: dwmmc@ff0f0000 { + compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff0f0000 0x0 0x4000>; + clock-freq-min-max = <400000 150000000>; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + saradc: saradc@ff100000 { + compatible = "rockchip,saradc"; + reg = <0x0 0xff100000 0x0 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + status = "disabled"; + }; + + spi0: spi@ff110000 { + compatible = "rockchip,rk3368-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff110000 0x0 0x1000>; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@ff120000 { + compatible = "rockchip,rk3368-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff120000 0x0 0x1000>; + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@ff130000 { + compatible = "rockchip,rk3368-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff130000 0x0 0x1000>; + clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@ff140000 { + compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; + reg = <0x0 0xff140000 0x0 0x1000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + status = "disabled"; + }; + + i2c3: i2c@ff150000 { + compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; + reg = <0x0 0xff150000 0x0 0x1000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_xfer>; + status = "disabled"; + }; + + i2c4: i2c@ff160000 { + compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; + reg = <0x0 0xff160000 0x0 0x1000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C4>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_xfer>; + status = "disabled"; + }; + + i2c5: i2c@ff170000 { + compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; + reg = <0x0 0xff170000 0x0 0x1000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C5>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_xfer>; + status = "disabled"; + }; + + uart0: serial@ff180000 { + compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff180000 0x0 0x100>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart1: serial@ff190000 { + compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff190000 0x0 0x100>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart3: serial@ff1b0000 { + compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff1b0000 0x0 0x100>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart4: serial@ff1c0000 { + compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff1c0000 0x0 0x100>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + gmac: ethernet@ff290000 { + compatible = "rockchip,rk3368-gmac"; + reg = <0x0 0xff290000 0x0 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + rockchip,grf = <&grf>; + clocks = <&cru SCLK_MAC>, + <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>, + <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>, + <&cru ACLK_GMAC>, <&cru PCLK_GMAC>; + clock-names = "stmmaceth", + "mac_clk_rx", "mac_clk_tx", + "clk_mac_ref", "clk_mac_refout", + "aclk_mac", "pclk_mac"; + status = "disabled"; + }; + + usb_host0_ehci: usb@ff500000 { + compatible = "generic-ehci"; + reg = <0x0 0xff500000 0x0 0x100>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST0>; + clock-names = "usbhost"; + status = "disabled"; + }; + + usb_otg: usb@ff580000 { + compatible = "rockchip,rk3368-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0x0 0xff580000 0x0 0x40000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG0>; + clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <275>; + g-tx-fifo-size = <256 128 128 64 64 32>; + g-use-dma; + status = "disabled"; + }; + + i2c0: i2c@ff650000 { + compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; + reg = <0x0 0xff650000 0x0 0x1000>; + clocks = <&cru PCLK_I2C0>; + clock-names = "i2c"; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@ff660000 { + compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; + reg = <0x0 0xff660000 0x0 0x1000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + status = "disabled"; + }; + + uart2: serial@ff690000 { + compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff690000 0x0 0x100>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + pmugrf: syscon@ff738000 { + compatible = "rockchip,rk3368-pmugrf", "syscon"; + reg = <0x0 0xff738000 0x0 0x1000>; + }; + + cru: clock-controller@ff760000 { + compatible = "rockchip,rk3368-cru"; + reg = <0x0 0xff760000 0x0 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + grf: syscon@ff770000 { + compatible = "rockchip,rk3368-grf", "syscon"; + reg = <0x0 0xff770000 0x0 0x1000>; + }; + + wdt: watchdog@ff800000 { + compatible = "rockchip,rk3368-wdt", "snps,dw-wdt"; + reg = <0x0 0xff800000 0x0 0x100>; + clocks = <&cru PCLK_WDT>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + gic: interrupt-controller@ffb71000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + + reg = <0x0 0xffb71000 0x0 0x1000>, + <0x0 0xffb72000 0x0 0x1000>, + <0x0 0xffb74000 0x0 0x2000>, + <0x0 0xffb76000 0x0 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3368-pinctrl"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmugrf>; + #address-cells = <0x2>; + #size-cells = <0x2>; + ranges; + + gpio0: gpio0@ff750000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff750000 0x0 0x100>; + clocks = <&cru PCLK_GPIO0>; + interrupts = <GIC_SPI 0x51 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <0x2>; + + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + gpio1: gpio1@ff780000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff780000 0x0 0x100>; + clocks = <&cru PCLK_GPIO1>; + interrupts = <GIC_SPI 0x52 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <0x2>; + + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + gpio2: gpio2@ff790000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff790000 0x0 0x100>; + clocks = <&cru PCLK_GPIO2>; + interrupts = <GIC_SPI 0x53 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <0x2>; + + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + gpio3: gpio3@ff7a0000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff7a0000 0x0 0x100>; + clocks = <&cru PCLK_GPIO3>; + interrupts = <GIC_SPI 0x54 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <0x2>; + + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pcfg_pull_none_12ma: pcfg-pull-none-12ma { + bias-disable; + drive-strength = <12>; + }; + + emmc { + emmc_clk: emmc-clk { + rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up>; + }; + + emmc_pwr: emmc-pwr { + rockchip,pins = <1 27 RK_FUNC_2 &pcfg_pull_up>; + }; + + emmc_bus1: emmc-bus1 { + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>; + }; + + emmc_bus4: emmc-bus4 { + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>, + <1 19 RK_FUNC_2 &pcfg_pull_up>, + <1 20 RK_FUNC_2 &pcfg_pull_up>, + <1 21 RK_FUNC_2 &pcfg_pull_up>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>, + <1 19 RK_FUNC_2 &pcfg_pull_up>, + <1 20 RK_FUNC_2 &pcfg_pull_up>, + <1 21 RK_FUNC_2 &pcfg_pull_up>, + <1 22 RK_FUNC_2 &pcfg_pull_up>, + <1 23 RK_FUNC_2 &pcfg_pull_up>, + <1 24 RK_FUNC_2 &pcfg_pull_up>, + <1 25 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + + gmac { + rgmii_pins: rgmii-pins { + rockchip,pins = <3 22 RK_FUNC_1 &pcfg_pull_none>, + <3 24 RK_FUNC_1 &pcfg_pull_none>, + <3 19 RK_FUNC_1 &pcfg_pull_none>, + <3 8 RK_FUNC_1 &pcfg_pull_none_12ma>, + <3 9 RK_FUNC_1 &pcfg_pull_none_12ma>, + <3 10 RK_FUNC_1 &pcfg_pull_none_12ma>, + <3 14 RK_FUNC_1 &pcfg_pull_none_12ma>, + <3 28 RK_FUNC_1 &pcfg_pull_none_12ma>, + <3 13 RK_FUNC_1 &pcfg_pull_none_12ma>, + <3 15 RK_FUNC_1 &pcfg_pull_none>, + <3 16 RK_FUNC_1 &pcfg_pull_none>, + <3 17 RK_FUNC_1 &pcfg_pull_none>, + <3 18 RK_FUNC_1 &pcfg_pull_none>, + <3 25 RK_FUNC_1 &pcfg_pull_none>, + <3 20 RK_FUNC_1 &pcfg_pull_none>; + }; + + rmii_pins: rmii-pins { + rockchip,pins = <3 22 RK_FUNC_1 &pcfg_pull_none>, + <3 24 RK_FUNC_1 &pcfg_pull_none>, + <3 19 RK_FUNC_1 &pcfg_pull_none>, + <3 8 RK_FUNC_1 &pcfg_pull_none_12ma>, + <3 9 RK_FUNC_1 &pcfg_pull_none_12ma>, + <3 13 RK_FUNC_1 &pcfg_pull_none_12ma>, + <3 15 RK_FUNC_1 &pcfg_pull_none>, + <3 16 RK_FUNC_1 &pcfg_pull_none>, + <3 20 RK_FUNC_1 &pcfg_pull_none>, + <3 21 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>, + <0 7 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = <2 21 RK_FUNC_1 &pcfg_pull_none>, + <2 22 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = <0 9 RK_FUNC_2 &pcfg_pull_none>, + <3 31 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none>, + <1 17 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c4 { + i2c4_xfer: i2c4-xfer { + rockchip,pins = <3 24 RK_FUNC_2 &pcfg_pull_none>, + <3 25 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + i2c5 { + i2c5_xfer: i2c5-xfer { + rockchip,pins = <3 26 RK_FUNC_2 &pcfg_pull_none>, + <3 27 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + sdio0 { + sdio0_bus1: sdio0-bus1 { + rockchip,pins = <2 28 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_bus4: sdio0-bus4 { + rockchip,pins = <2 28 RK_FUNC_1 &pcfg_pull_up>, + <2 29 RK_FUNC_1 &pcfg_pull_up>, + <2 30 RK_FUNC_1 &pcfg_pull_up>, + <2 31 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_cmd: sdio0-cmd { + rockchip,pins = <3 0 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_clk: sdio0-clk { + rockchip,pins = <3 1 RK_FUNC_1 &pcfg_pull_none>; + }; + + sdio0_cd: sdio0-cd { + rockchip,pins = <3 2 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_wp: sdio0-wp { + rockchip,pins = <3 3 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_pwr: sdio0-pwr { + rockchip,pins = <3 4 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_bkpwr: sdio0-bkpwr { + rockchip,pins = <3 5 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_int: sdio0-int { + rockchip,pins = <3 6 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = <2 9 RK_FUNC_1 &pcfg_pull_none>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdmmc_cd: sdmcc-cd { + rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up>, + <2 6 RK_FUNC_1 &pcfg_pull_up>, + <2 7 RK_FUNC_1 &pcfg_pull_up>, + <2 8 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = <1 29 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_cs0: spi0-cs0 { + rockchip,pins = <1 24 RK_FUNC_3 &pcfg_pull_up>; + }; + spi0_cs1: spi0-cs1 { + rockchip,pins = <1 25 RK_FUNC_3 &pcfg_pull_up>; + }; + spi0_tx: spi0-tx { + rockchip,pins = <1 23 RK_FUNC_3 &pcfg_pull_up>; + }; + spi0_rx: spi0-rx { + rockchip,pins = <1 22 RK_FUNC_3 &pcfg_pull_up>; + }; + }; + + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = <1 14 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_cs0: spi1-cs0 { + rockchip,pins = <1 15 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_cs1: spi1-cs1 { + rockchip,pins = <3 28 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_rx: spi1-rx { + rockchip,pins = <1 16 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_tx: spi1-tx { + rockchip,pins = <1 17 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + + spi2 { + spi2_clk: spi2-clk { + rockchip,pins = <0 12 RK_FUNC_2 &pcfg_pull_up>; + }; + spi2_cs0: spi2-cs0 { + rockchip,pins = <0 13 RK_FUNC_2 &pcfg_pull_up>; + }; + spi2_rx: spi2-rx { + rockchip,pins = <0 10 RK_FUNC_2 &pcfg_pull_up>; + }; + spi2_tx: spi2-tx { + rockchip,pins = <0 11 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <2 24 RK_FUNC_1 &pcfg_pull_up>, + <2 25 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <2 27 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <0 20 RK_FUNC_3 &pcfg_pull_up>, + <0 21 RK_FUNC_3 &pcfg_pull_none>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = <0 22 RK_FUNC_3 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = <0 23 RK_FUNC_3 &pcfg_pull_none>; + }; + }; + + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = <2 6 RK_FUNC_2 &pcfg_pull_up>, + <2 5 RK_FUNC_2 &pcfg_pull_none>; + }; + /* no rts / cts for uart2 */ + }; + + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = <3 29 RK_FUNC_2 &pcfg_pull_up>, + <3 30 RK_FUNC_3 &pcfg_pull_none>; + }; + + uart3_cts: uart3-cts { + rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none>; + }; + + uart3_rts: uart3-rts { + rockchip,pins = <3 17 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + uart4 { + uart4_xfer: uart4-xfer { + rockchip,pins = <0 27 RK_FUNC_3 &pcfg_pull_up>, + <0 26 RK_FUNC_3 &pcfg_pull_none>; + }; + + uart4_cts: uart4-cts { + rockchip,pins = <0 24 RK_FUNC_3 &pcfg_pull_none>; + }; + + uart4_rts: uart4-rts { + rockchip,pins = <0 25 RK_FUNC_3 &pcfg_pull_none>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi index ee34e1a36e03..63894c456969 100644 --- a/arch/arm64/boot/dts/sprd/sc9836.dtsi +++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi @@ -16,28 +16,28 @@ #address-cells = <2>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x0>; enable-method = "psci"; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x1>; enable-method = "psci"; }; - cpu@2 { + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x2>; enable-method = "psci"; }; - cpu@3 { + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x3>; @@ -75,14 +75,103 @@ }; }; - /* funnel input port 0~3 is reserved for ETMs */ + /* funnel input port 0-4 */ port@1 { + reg = <0>; + funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etm0_out>; + }; + }; + + port@2 { + reg = <1>; + funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&etm1_out>; + }; + }; + + port@3 { + reg = <2>; + funnel_in_port2: endpoint { + slave-mode; + remote-endpoint = <&etm2_out>; + }; + }; + + port@4 { + reg = <3>; + funnel_in_port3: endpoint { + slave-mode; + remote-endpoint = <&etm3_out>; + }; + }; + + port@5 { reg = <4>; funnel_in_port4: endpoint { slave-mode; remote-endpoint = <&stm_out>; }; }; + /* Other input ports aren't connected to anyone */ + }; + }; + + etm@10440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x10440000 0 0x1000>; + + cpu = <&cpu0>; + clocks = <&clk26mhz>; + clock-names = "apb_pclk"; + port { + etm0_out: endpoint { + remote-endpoint = <&funnel_in_port0>; + }; + }; + }; + + etm@10540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x10540000 0 0x1000>; + + cpu = <&cpu1>; + clocks = <&clk26mhz>; + clock-names = "apb_pclk"; + port { + etm1_out: endpoint { + remote-endpoint = <&funnel_in_port1>; + }; + }; + }; + + etm@10640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x10640000 0 0x1000>; + + cpu = <&cpu2>; + clocks = <&clk26mhz>; + clock-names = "apb_pclk"; + port { + etm2_out: endpoint { + remote-endpoint = <&funnel_in_port2>; + }; + }; + }; + + etm@10740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x10740000 0 0x1000>; + + cpu = <&cpu3>; + clocks = <&clk26mhz>; + clock-names = "apb_pclk"; + port { + etm3_out: endpoint { + remote-endpoint = <&funnel_in_port3>; + }; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts index 0a3f40ecd06d..ce5d848251fa 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts @@ -32,6 +32,10 @@ }; }; +&can0 { + status = "okay"; +}; + &gem0 { status = "okay"; phy-handle = <&phy0>; @@ -42,6 +46,91 @@ }; }; +&gpio { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + eeprom@54 { + compatible = "at,24c64"; + reg = <0x54>; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + eeprom@55 { + compatible = "at,24c64"; + reg = <0x55>; + }; +}; + +&sata { + status = "okay"; + ceva,broken-gen2; +}; + +&sdhci0 { + status = "okay"; +}; + +&sdhci1 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + num-cs = <1>; + spi0_flash0: spi0_flash0@0 { + compatible = "m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + spi0_flash0@00000000 { + label = "spi0_flash0"; + reg = <0x0 0x100000>; + }; + }; +}; + +&spi1 { + status = "okay"; + num-cs = <1>; + spi1_flash0: spi1_flash0@0 { + compatible = "m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + spi1_flash0@00000000 { + label = "spi1_flash0"; + reg = <0x0 0x100000>; + }; + }; +}; + &uart0 { status = "okay"; }; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; + maximum-speed = "high-speed"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; + maximum-speed = "high-speed"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 11e0b00045cf..857eda5c7217 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -96,74 +96,38 @@ #size-cells = <1>; ranges; - misc_clk: misc_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - ttc0: timer@ff110000 { - compatible = "cdns,ttc"; - status = "disabled"; - interrupt-parent = <&gic>; - interrupts = <0 36 4>, <0 37 4>, <0 38 4>; - reg = <0x0 0xff110000 0x1000>; - clocks = <&misc_clk>; - timer-width = <32>; - }; - - ttc1: timer@ff120000 { - compatible = "cdns,ttc"; - status = "disabled"; - interrupt-parent = <&gic>; - interrupts = <0 39 4>, <0 40 4>, <0 41 4>; - reg = <0x0 0xff120000 0x1000>; - clocks = <&misc_clk>; - timer-width = <32>; - }; - - ttc2: timer@ff130000 { - compatible = "cdns,ttc"; - status = "disabled"; - interrupt-parent = <&gic>; - interrupts = <0 42 4>, <0 43 4>, <0 44 4>; - reg = <0x0 0xff130000 0x1000>; - clocks = <&misc_clk>; - timer-width = <32>; - }; - - ttc3: timer@ff140000 { - compatible = "cdns,ttc"; + can0: can@ff060000 { + compatible = "xlnx,zynq-can-1.0"; status = "disabled"; + clocks = <&misc_clk &misc_clk>; + clock-names = "can_clk", "pclk"; + reg = <0x0 0xff060000 0x1000>; + interrupts = <0 23 4>; interrupt-parent = <&gic>; - interrupts = <0 45 4>, <0 46 4>, <0 47 4>; - reg = <0x0 0xff140000 0x1000>; - clocks = <&misc_clk>; - timer-width = <32>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; }; - uart0: serial@ff000000 { - compatible = "cdns,uart-r1p8"; + can1: can@ff070000 { + compatible = "xlnx,zynq-can-1.0"; status = "disabled"; - interrupt-parent = <&gic>; - interrupts = <0 21 4>; - reg = <0x0 0xff000000 0x1000>; - clock-names = "uart_clk", "pclk"; clocks = <&misc_clk &misc_clk>; + clock-names = "can_clk", "pclk"; + reg = <0x0 0xff070000 0x1000>; + interrupts = <0 24 4>; + interrupt-parent = <&gic>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; }; - uart1: serial@ff010000 { - compatible = "cdns,uart-r1p8"; - status = "disabled"; - interrupt-parent = <&gic>; - interrupts = <0 22 4>; - reg = <0x0 0xff010000 0x1000>; - clock-names = "uart_clk", "pclk"; - clocks = <&misc_clk &misc_clk>; + misc_clk: misc_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; }; gpio: gpio@ff0a0000 { - compatible = "xlnx,zynq-gpio-1.0"; + compatible = "xlnx,zynqmp-gpio-1.0"; status = "disabled"; #gpio-cells = <0x2>; clocks = <&misc_clk>; @@ -220,30 +184,6 @@ #size-cells = <0>; }; - spi0: spi@ff040000 { - compatible = "cdns,spi-r1p6"; - status = "disabled"; - interrupt-parent = <&gic>; - interrupts = <0 19 4>; - reg = <0x0 0xff040000 0x1000>; - clock-names = "ref_clk", "pclk"; - clocks = <&misc_clk &misc_clk>; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi1: spi@ff050000 { - compatible = "cdns,spi-r1p6"; - status = "disabled"; - interrupt-parent = <&gic>; - interrupts = <0 20 4>; - reg = <0x0 0xff050000 0x1000>; - clock-names = "ref_clk", "pclk"; - clocks = <&misc_clk &misc_clk>; - #address-cells = <1>; - #size-cells = <0>; - }; - i2c_clk: i2c_clk { compatible = "fixed-clock"; #clock-cells = <0x0>; @@ -272,6 +212,21 @@ #size-cells = <0>; }; + sata_clk: sata_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <75000000>; + }; + + sata: ahci@fd0c0000 { + compatible = "ceva,ahci-1v84"; + status = "disabled"; + reg = <0x0 0xfd0c0000 0x2000>; + interrupt-parent = <&gic>; + interrupts = <0 133 4>; + clocks = <&sata_clk>; + }; + sdhci0: sdhci@ff160000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; @@ -292,6 +247,122 @@ clocks = <&misc_clk>, <&misc_clk>; }; + smmu: smmu@fd800000 { + compatible = "arm,mmu-500"; + reg = <0x0 0xfd800000 0x20000>; + #global-interrupts = <1>; + interrupt-parent = <&gic>; + interrupts = <0 157 4>, + <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>, + <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>, + <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>, + <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>; + }; + + spi0: spi@ff040000 { + compatible = "cdns,spi-r1p6"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 19 4>; + reg = <0x0 0xff040000 0x1000>; + clock-names = "ref_clk", "pclk"; + clocks = <&misc_clk &misc_clk>; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@ff050000 { + compatible = "cdns,spi-r1p6"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 20 4>; + reg = <0x0 0xff050000 0x1000>; + clock-names = "ref_clk", "pclk"; + clocks = <&misc_clk &misc_clk>; + #address-cells = <1>; + #size-cells = <0>; + }; + + ttc0: timer@ff110000 { + compatible = "cdns,ttc"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 36 4>, <0 37 4>, <0 38 4>; + reg = <0x0 0xff110000 0x1000>; + clocks = <&misc_clk>; + timer-width = <32>; + }; + + ttc1: timer@ff120000 { + compatible = "cdns,ttc"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 39 4>, <0 40 4>, <0 41 4>; + reg = <0x0 0xff120000 0x1000>; + clocks = <&misc_clk>; + timer-width = <32>; + }; + + ttc2: timer@ff130000 { + compatible = "cdns,ttc"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 42 4>, <0 43 4>, <0 44 4>; + reg = <0x0 0xff130000 0x1000>; + clocks = <&misc_clk>; + timer-width = <32>; + }; + + ttc3: timer@ff140000 { + compatible = "cdns,ttc"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 45 4>, <0 46 4>, <0 47 4>; + reg = <0x0 0xff140000 0x1000>; + clocks = <&misc_clk>; + timer-width = <32>; + }; + + uart0: serial@ff000000 { + compatible = "cdns,uart-r1p8"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 21 4>; + reg = <0x0 0xff000000 0x1000>; + clock-names = "uart_clk", "pclk"; + clocks = <&misc_clk &misc_clk>; + }; + + uart1: serial@ff010000 { + compatible = "cdns,uart-r1p8"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 22 4>; + reg = <0x0 0xff010000 0x1000>; + clock-names = "uart_clk", "pclk"; + clocks = <&misc_clk &misc_clk>; + }; + + usb0: usb@fe200000 { + compatible = "snps,dwc3"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 65 4>; + reg = <0x0 0xfe200000 0x40000>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&misc_clk>, <&misc_clk>; + }; + + usb1: usb@fe300000 { + compatible = "snps,dwc3"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 70 4>; + reg = <0x0 0xfe300000 0x40000>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&misc_clk>, <&misc_clk>; + }; + watchdog0: watchdog@fd4d0000 { compatible = "cdns,wdt-r1p2"; status = "disabled"; |