diff options
Diffstat (limited to 'arch/arm64')
113 files changed, 11201 insertions, 816 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 30398dbc940a..969ef880d234 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -915,7 +915,7 @@ config RANDOMIZE_BASE config RANDOMIZE_MODULE_REGION_FULL bool "Randomize the module region independently from the core kernel" - depends on RANDOMIZE_BASE + depends on RANDOMIZE_BASE && !DYNAMIC_FTRACE default y help Randomizes the location of the module region without considering the diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index cfbdf02ef566..101794f5ce10 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -190,6 +190,7 @@ config ARCH_THUNDER config ARCH_UNIPHIER bool "Socionext UniPhier SoC Family" + select ARCH_HAS_RESET_CONTROLLER select PINCTRL help This enables support for Socionext UniPhier SoC family. diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index ab51aed6b6c1..3635b8662724 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -15,7 +15,7 @@ CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET) GZFLAGS :=-9 ifneq ($(CONFIG_RELOCATABLE),) -LDFLAGS_vmlinux += -pie -Bsymbolic +LDFLAGS_vmlinux += -pie -shared -Bsymbolic endif ifeq ($(CONFIG_ARM64_ERRATUM_843419),y) diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 6684f97c2722..080232b0270e 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -1,4 +1,5 @@ dts-dirs += al +dts-dirs += allwinner dts-dirs += altera dts-dirs += amd dts-dirs += amlogic diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile new file mode 100644 index 000000000000..1e29a5ae8282 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts new file mode 100644 index 000000000000..790d14daaa6a --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts @@ -0,0 +1,50 @@ +/* + * Copyright (c) 2016 ARM Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun50i-a64-pine64.dts" + +/ { + model = "Pine64+"; + compatible = "pine64,pine64-plus", "allwinner,sun50i-a64"; + + /* TODO: Camera, Ethernet PHY, touchscreen, etc. */ +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts new file mode 100644 index 000000000000..47095909d9d6 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -0,0 +1,74 @@ +/* + * Copyright (c) 2016 ARM Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "sun50i-a64.dtsi" + +/ { + model = "Pine64"; + compatible = "pine64,pine64", "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +&i2c1_pins { + bias-pull-up; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi new file mode 100644 index 000000000000..e0dcab8eb035 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -0,0 +1,261 @@ +/* + * Copyright (C) 2016 ARM Ltd. + * based on the Allwinner H3 dtsi: + * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <3>; + enable-method = "psci"; + }; + }; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ccu: clock@01c20000 { + compatible = "allwinner,sun50i-a64-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pio: pinctrl@1c20800 { + compatible = "allwinner,sun50i-a64-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 58>; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + i2c1_pins: i2c1_pins { + pins = "PH2", "PH3"; + function = "i2c1"; + }; + + uart0_pins_a: uart0@0 { + pins = "PB8", "PB9"; + function = "uart0"; + }; + }; + + uart0: serial@1c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 67>; + resets = <&ccu 46>; + status = "disabled"; + }; + + uart1: serial@1c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 68>; + resets = <&ccu 47>; + status = "disabled"; + }; + + uart2: serial@1c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 69>; + resets = <&ccu 48>; + status = "disabled"; + }; + + uart3: serial@1c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 70>; + resets = <&ccu 49>; + status = "disabled"; + }; + + uart4: serial@1c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 71>; + resets = <&ccu 50>; + status = "disabled"; + }; + + i2c0: i2c@1c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 63>; + resets = <&ccu 42>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@1c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 64>; + resets = <&ccu 43>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@1c2b400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 65>; + resets = <&ccu 44>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gic: interrupt-controller@1c81000 { + compatible = "arm,gic-400"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x2000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + rtc: rtc@1f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 47ec703cb230..5a640504a127 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,9 +1,13 @@ +dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi new file mode 100644 index 000000000000..fc033c0d2a0f --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -0,0 +1,360 @@ +/* + * Copyright (c) 2016 Andreas Färber + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <0x2>; + #size-cells = <0x0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + + firmware { + sm: secure-monitor { + compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm"; + }; + }; + + efuse: efuse { + compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse"; + #address-cells = <1>; + #size-cells = <1>; + + sn: sn@14 { + reg = <0x14 0x10>; + }; + + eth_mac: eth_mac@34 { + reg = <0x34 0x10>; + }; + + bid: bid@46 { + reg = <0x46 0x30>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cbus: cbus@c1100000 { + compatible = "simple-bus"; + reg = <0x0 0xc1100000 0x0 0x100000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>; + + reset: reset-controller@4404 { + compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset"; + reg = <0x0 0x04404 0x0 0x20>; + #reset-cells = <1>; + }; + + uart_A: serial@84c0 { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x84c0 0x0 0x14>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; + + uart_B: serial@84dc { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x84dc 0x0 0x14>; + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; + + i2c_A: i2c@8500 { + compatible = "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x08500 0x0 0x20>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm_ab: pwm@8550 { + compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x08550 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@8650 { + compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x08650 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_ef: pwm@86c0 { + compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x086c0 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + uart_C: serial@8700 { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x8700 0x0 0x14>; + interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; + + i2c_B: i2c@87c0 { + compatible = "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x087c0 0x0 0x20>; + interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c_C: i2c@87e0 { + compatible = "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x087e0 0x0 0x20>; + interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + watchdog@98d0 { + compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt"; + reg = <0x0 0x098d0 0x0 0x10>; + clocks = <&xtal>; + }; + }; + + gic: interrupt-controller@c4301000 { + compatible = "arm,gic-400"; + reg = <0x0 0xc4301000 0 0x1000>, + <0x0 0xc4302000 0 0x2000>, + <0x0 0xc4304000 0 0x2000>, + <0x0 0xc4306000 0 0x2000>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + + aobus: aobus@c8100000 { + compatible = "simple-bus"; + reg = <0x0 0xc8100000 0x0 0x100000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; + + uart_AO: serial@4c0 { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x004c0 0x0 0x14>; + interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; + + ir: ir@580 { + compatible = "amlogic,meson-gxbb-ir"; + reg = <0x0 0x00580 0x0 0x40>; + interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + }; + + periphs: periphs@c8834000 { + compatible = "simple-bus"; + reg = <0x0 0xc8834000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>; + + rng { + compatible = "amlogic,meson-rng"; + reg = <0x0 0x0 0x0 0x4>; + }; + }; + + + hiubus: hiubus@c883c000 { + compatible = "simple-bus"; + reg = <0x0 0xc883c000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; + + mailbox: mailbox@404 { + compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; + reg = <0 0x404 0 0x4c>; + interrupts = <0 208 IRQ_TYPE_EDGE_RISING>, + <0 209 IRQ_TYPE_EDGE_RISING>, + <0 210 IRQ_TYPE_EDGE_RISING>; + #mbox-cells = <1>; + }; + }; + + ethmac: ethernet@c9410000 { + compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac"; + reg = <0x0 0xc9410000 0x0 0x10000 + 0x0 0xc8834540 0x0 0x4>; + interrupts = <0 8 1>; + interrupt-names = "macirq"; + phy-mode = "rgmii"; + status = "disabled"; + }; + + apb: apb@d0000000 { + compatible = "simple-bus"; + reg = <0x0 0xd0000000 0x0 0x200000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>; + + sd_emmc_a: mmc@70000 { + compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; + reg = <0x0 0x70000 0x0 0x2000>; + interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + sd_emmc_b: mmc@72000 { + compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; + reg = <0x0 0x72000 0x0 0x2000>; + interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + sd_emmc_c: mmc@74000 { + compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; + reg = <0x0 0x74000 0x0 0x2000>; + interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts new file mode 100644 index 000000000000..969682092e0f --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -0,0 +1,231 @@ +/* + * Copyright (c) 2016 Andreas Färber + * Copyright (c) 2016 BayLibre, Inc. + * Author: Neil Armstrong <narmstrong@kernel.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxbb.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "nexbox,a95x", "amlogic,meson-gxbb"; + model = "NEXBOX A95X"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + leds { + compatible = "gpio-leds"; + blue { + label = "a95x:system-status"; + gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button@0 { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; + }; + }; + + vddio_card: gpio-regulator { + compatible = "regulator-gpio"; + + regulator-name = "VDDIO_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + + /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ + states = <1800000 0 + 3300000 1>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_rmii_pins>; + pinctrl-names = "default"; + phy-mode = "rmii"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_card>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index e6e3491d48a5..238fbeacd330 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -64,6 +64,18 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + usb_otg_pwr: regulator-usb-pwrs { + compatible = "regulator-fixed"; + + regulator-name = "USB_OTG_PWR"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + leds { compatible = "gpio-leds"; blue { @@ -73,6 +85,56 @@ default-state = "off"; }; }; + + tflash_vdd: regulator-tflash_vdd { + /* + * signal name from schematics: TFLASH_VDD_EN + */ + compatible = "regulator-fixed"; + + regulator-name = "TFLASH_VDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_ao GPIOAO_12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + tf_io: gpio-regulator-tf_io { + compatible = "regulator-gpio"; + + regulator-name = "TF_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + /* + * signal name from schematics: TF_3V3N_1V8_EN + */ + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0 + 1800000 1>; + }; + + vcc1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; }; &uart_AO { @@ -83,7 +145,7 @@ ðmac { status = "okay"; - pinctrl-0 = <ð_pins>; + pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; }; @@ -98,3 +160,58 @@ pinctrl-0 = <&i2c_a_pins>; pinctrl-names = "default"; }; + +&usb0_phy { + status = "okay"; + phy-supply = <&usb_otg_pwr>; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +/* SD */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&tflash_vdd>; + vqmmc-supply = <&tf_io>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc3v3>; + vqmmc-supply = <&vcc1v8>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 06a34dc6002f..203be28978d5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -70,6 +70,61 @@ gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + vddio_card: gpio-regulator { + compatible = "regulator-gpio"; + + regulator-name = "VDDIO_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + + /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ + states = <1800000 0 + 3300000 1>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; }; /* This UART is brought out to the DB9 connector */ @@ -81,7 +136,7 @@ ðmac { status = "okay"; - pinctrl-0 = <ð_pins>; + pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; }; @@ -107,3 +162,75 @@ &usb1 { status = "okay"; }; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_card>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 73f159370188..e59ad308192f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -65,6 +65,39 @@ enable-active-high; }; + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>, + <&gpio GPIOX_20 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; }; &uart_AO { @@ -82,7 +115,7 @@ ðmac { status = "okay"; - pinctrl-0 = <ð_pins>; + pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; }; @@ -102,3 +135,74 @@ &usb1 { status = "okay"; }; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins &sdio_irq_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vcc_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vmmcq-sumpply = <&vcc_1v8>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 610e0e1c3cee..160664fd8d63 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -40,9 +40,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "meson-gx.dtsi" #include <dt-bindings/gpio/meson-gxbb-gpio.h> #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> #include <dt-bindings/clock/gxbb-clkc.h> @@ -51,106 +49,30 @@ / { compatible = "amlogic,meson-gxbb"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - cpus { - #address-cells = <0x2>; - #size-cells = <0x0>; + scpi { + compatible = "amlogic,meson-gxbb-scpi"; + mboxes = <&mailbox 1 &mailbox 2>; + shmem = <&cpu_scp_lpri &cpu_scp_hpri>; - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; - reg = <0x0 0x0>; - enable-method = "psci"; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; - reg = <0x0 0x1>; - enable-method = "psci"; - }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; - reg = <0x0 0x2>; - enable-method = "psci"; - }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; - reg = <0x0 0x3>; - enable-method = "psci"; - }; - }; - - arm-pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; + clocks { + compatible = "arm,scpi-clocks"; - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - firmware { - sm: secure-monitor { - compatible = "amlogic,meson-gxbb-sm"; - }; - }; - - efuse: efuse { - compatible = "amlogic,meson-gxbb-efuse"; - #address-cells = <1>; - #size-cells = <1>; - - sn: sn@14 { - reg = <0x14 0x10>; - }; - - eth_mac: eth_mac@34 { - reg = <0x34 0x10>; + scpi_dvfs: scpi_clocks@0 { + compatible = "arm,scpi-dvfs-clocks"; + #clock-cells = <1>; + clock-indices = <0>; + clock-output-names = "vcpu"; + }; }; - bid: bid@46 { - reg = <0x46 0x30>; + scpi_sensors: sensors { + compatible = "arm,scpi-sensors"; + #thermal-sensor-cells = <1>; }; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; - }; - - xtal: xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xtal"; - #clock-cells = <0>; - }; - soc { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - usb0_phy: phy@c0000000 { compatible = "amlogic,meson-gxbb-usb2-phy"; #phy-cells = <0>; @@ -170,500 +92,416 @@ status = "disabled"; }; - cbus: cbus@c1100000 { - compatible = "simple-bus"; - reg = <0x0 0xc1100000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>; + sram: sram@c8000000 { + compatible = "amlogic,meson-gxbb-sram", "mmio-sram"; + reg = <0x0 0xc8000000 0x0 0x14000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0xc8000000 0x14000>; - reset: reset-controller@4404 { - compatible = "amlogic,meson-gxbb-reset"; - reg = <0x0 0x04404 0x0 0x20>; - #reset-cells = <1>; + cpu_scp_lpri: scp-shmem@0 { + compatible = "amlogic,meson-gxbb-scp-shmem"; + reg = <0x13000 0x400>; }; - uart_A: serial@84c0 { - compatible = "amlogic,meson-uart"; - reg = <0x0 0x84c0 0x0 0x14>; - interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>; - status = "disabled"; + cpu_scp_hpri: scp-shmem@200 { + compatible = "amlogic,meson-gxbb-scp-shmem"; + reg = <0x13400 0x400>; }; + }; - uart_B: serial@84dc { - compatible = "amlogic,meson-uart"; - reg = <0x0 0x84dc 0x0 0x14>; - interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>; - status = "disabled"; + usb0: usb@c9000000 { + compatible = "amlogic,meson-gxbb-usb", "snps,dwc2"; + reg = <0x0 0xc9000000 0x0 0x40000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_USB0_DDR_BRIDGE>; + clock-names = "otg"; + phys = <&usb0_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; + status = "disabled"; + }; + + usb1: usb@c9100000 { + compatible = "amlogic,meson-gxbb-usb", "snps,dwc2"; + reg = <0x0 0xc9100000 0x0 0x40000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "otg"; + phys = <&usb1_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; + status = "disabled"; + }; + }; +}; + +&cpu0 { + clocks = <&scpi_dvfs 0>; +}; + +&cpu1 { + clocks = <&scpi_dvfs 0>; +}; + +&cpu2 { + clocks = <&scpi_dvfs 0>; +}; + +&cpu3 { + clocks = <&scpi_dvfs 0>; +}; + +&cbus { + spifc: spi@8c80 { + compatible = "amlogic,meson-gxbb-spifc"; + reg = <0x0 0x08c80 0x0 0x80>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_SPI>; + status = "disabled"; + }; +}; + +ðmac { + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; +}; + +&aobus { + pinctrl_aobus: pinctrl@14 { + compatible = "amlogic,meson-gxbb-aobus-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio_ao: bank@14 { + reg = <0x0 0x00014 0x0 0x8>, + <0x0 0x0002c 0x0 0x4>, + <0x0 0x00024 0x0 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; }; + }; - pwm_ab: pwm@8550 { - compatible = "amlogic,meson-gxbb-pwm"; - reg = <0x0 0x08550 0x0 0x10>; - #pwm-cells = <3>; - status = "disabled"; + remote_input_ao_pins: remote_input_ao { + mux { + groups = "remote_input_ao"; + function = "remote_input_ao"; }; + }; - pwm_cd: pwm@8650 { - compatible = "amlogic,meson-gxbb-pwm"; - reg = <0x0 0x08650 0x0 0x10>; - #pwm-cells = <3>; - status = "disabled"; + i2c_ao_pins: i2c_ao { + mux { + groups = "i2c_sck_ao", + "i2c_sda_ao"; + function = "i2c_ao"; }; + }; - pwm_ef: pwm@86c0 { - compatible = "amlogic,meson-gxbb-pwm"; - reg = <0x0 0x086c0 0x0 0x10>; - #pwm-cells = <3>; - status = "disabled"; + pwm_ao_a_3_pins: pwm_ao_a_3 { + mux { + groups = "pwm_ao_a_3"; + function = "pwm_ao_a_3"; }; + }; - uart_C: serial@8700 { - compatible = "amlogic,meson-uart"; - reg = <0x0 0x8700 0x0 0x14>; - interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>; - status = "disabled"; + pwm_ao_a_6_pins: pwm_ao_a_6 { + mux { + groups = "pwm_ao_a_6"; + function = "pwm_ao_a_6"; }; + }; - watchdog@98d0 { - compatible = "amlogic,meson-gxbb-wdt"; - reg = <0x0 0x098d0 0x0 0x10>; - clocks = <&xtal>; + pwm_ao_a_12_pins: pwm_ao_a_12 { + mux { + groups = "pwm_ao_a_12"; + function = "pwm_ao_a_12"; }; + }; - spifc: spi@8c80 { - compatible = "amlogic,meson-gxbb-spifc"; - reg = <0x0 0x08c80 0x0 0x80>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_SPI>; - status = "disabled"; + pwm_ao_b_pins: pwm_ao_b { + mux { + groups = "pwm_ao_b"; + function = "pwm_ao_b"; }; + }; + }; + + clkc_AO: clock-controller@040 { + compatible = "amlogic,gxbb-aoclkc"; + reg = <0x0 0x00040 0x0 0x4>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pwm_ab_AO: pwm@550 { + compatible = "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x0550 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + i2c_AO: i2c@500 { + compatible = "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x500 0x0 0x20>; + interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_AO_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; + +&periphs { + pinctrl_periphs: pinctrl@4b0 { + compatible = "amlogic,meson-gxbb-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@4b0 { + reg = <0x0 0x004b0 0x0 0x28>, + <0x0 0x004e8 0x0 0x14>, + <0x0 0x00120 0x0 0x14>, + <0x0 0x00430 0x0 0x40>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; - i2c_A: i2c@8500 { - compatible = "amlogic,meson-gxbb-i2c"; - reg = <0x0 0x08500 0x0 0x20>; - interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; + emmc_pins: emmc { + mux { + groups = "emmc_nand_d07", + "emmc_cmd", + "emmc_clk", + "emmc_ds"; + function = "emmc"; }; + }; - i2c_B: i2c@87c0 { - compatible = "amlogic,meson-gxbb-i2c"; - reg = <0x0 0x087c0 0x0 0x20>; - interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; + nor_pins: nor { + mux { + groups = "nor_d", + "nor_q", + "nor_c", + "nor_cs"; + function = "nor"; }; + }; - i2c_C: i2c@87e0 { - compatible = "amlogic,meson-gxbb-i2c"; - reg = <0x0 0x087e0 0x0 0x20>; - interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; + sdcard_pins: sdcard { + mux { + groups = "sdcard_d0", + "sdcard_d1", + "sdcard_d2", + "sdcard_d3", + "sdcard_cmd", + "sdcard_clk"; + function = "sdcard"; }; }; - gic: interrupt-controller@c4301000 { - compatible = "arm,gic-400"; - reg = <0x0 0xc4301000 0 0x1000>, - <0x0 0xc4302000 0 0x2000>, - <0x0 0xc4304000 0 0x2000>, - <0x0 0xc4306000 0 0x2000>; - interrupt-controller; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; - #interrupt-cells = <3>; - #address-cells = <0>; - }; - - aobus: aobus@c8100000 { - compatible = "simple-bus"; - reg = <0x0 0xc8100000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; - - pinctrl_aobus: pinctrl@14 { - compatible = "amlogic,meson-gxbb-aobus-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio_ao: bank@14 { - reg = <0x0 0x00014 0x0 0x8>, - <0x0 0x0002c 0x0 0x4>, - <0x0 0x00024 0x0 0x8>; - reg-names = "mux", "pull", "gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - uart_ao_a_pins: uart_ao_a { - mux { - groups = "uart_tx_ao_a", "uart_rx_ao_a"; - function = "uart_ao"; - }; - }; - - remote_input_ao_pins: remote_input_ao { - mux { - groups = "remote_input_ao"; - function = "remote_input_ao"; - }; - }; - - i2c_ao_pins: i2c_ao { - mux { - groups = "i2c_sck_ao", - "i2c_sda_ao"; - function = "i2c_ao"; - }; - }; - - pwm_ao_a_3_pins: pwm_ao_a_3 { - mux { - groups = "pwm_ao_a_3"; - function = "pwm_ao_a_3"; - }; - }; - - pwm_ao_a_6_pins: pwm_ao_a_6 { - mux { - groups = "pwm_ao_a_6"; - function = "pwm_ao_a_6"; - }; - }; - - pwm_ao_a_12_pins: pwm_ao_a_12 { - mux { - groups = "pwm_ao_a_12"; - function = "pwm_ao_a_12"; - }; - }; - - pwm_ao_b_pins: pwm_ao_b { - mux { - groups = "pwm_ao_b"; - function = "pwm_ao_b"; - }; - }; + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_cmd", + "sdio_clk"; + function = "sdio"; }; + }; - clkc_AO: clock-controller@040 { - compatible = "amlogic,gxbb-aoclkc"; - reg = <0x0 0x00040 0x0 0x4>; - #clock-cells = <1>; - #reset-cells = <1>; + sdio_irq_pins: sdio_irq { + mux { + groups = "sdio_irq"; + function = "sdio"; }; + }; - uart_AO: serial@4c0 { - compatible = "amlogic,meson-uart"; - reg = <0x0 0x004c0 0x0 0x14>; - interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>; - status = "disabled"; + uart_a_pins: uart_a { + mux { + groups = "uart_tx_a", + "uart_rx_a"; + function = "uart_a"; }; + }; - ir: ir@580 { - compatible = "amlogic,meson-gxbb-ir"; - reg = <0x0 0x00580 0x0 0x40>; - interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; + uart_b_pins: uart_b { + mux { + groups = "uart_tx_b", + "uart_rx_b"; + function = "uart_b"; }; + }; - pwm_ab_AO: pwm@550 { - compatible = "amlogic,meson-gxbb-pwm"; - reg = <0x0 0x0550 0x0 0x10>; - #pwm-cells = <3>; - status = "disabled"; + uart_c_pins: uart_c { + mux { + groups = "uart_tx_c", + "uart_rx_c"; + function = "uart_c"; }; + }; - i2c_AO: i2c@500 { - compatible = "amlogic,meson-gxbb-i2c"; - reg = <0x0 0x500 0x0 0x20>; - interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_AO_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; + i2c_a_pins: i2c_a { + mux { + groups = "i2c_sck_a", + "i2c_sda_a"; + function = "i2c_a"; }; }; - periphs: periphs@c8834000 { - compatible = "simple-bus"; - reg = <0x0 0xc8834000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>; + i2c_b_pins: i2c_b { + mux { + groups = "i2c_sck_b", + "i2c_sda_b"; + function = "i2c_b"; + }; + }; - rng { - compatible = "amlogic,meson-rng"; - reg = <0x0 0x0 0x0 0x4>; + i2c_c_pins: i2c_c { + mux { + groups = "i2c_sck_c", + "i2c_sda_c"; + function = "i2c_c"; }; + }; - pinctrl_periphs: pinctrl@4b0 { - compatible = "amlogic,meson-gxbb-periphs-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio: bank@4b0 { - reg = <0x0 0x004b0 0x0 0x28>, - <0x0 0x004e8 0x0 0x14>, - <0x0 0x00120 0x0 0x14>, - <0x0 0x00430 0x0 0x40>; - reg-names = "mux", "pull", "pull-enable", "gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - emmc_pins: emmc { - mux { - groups = "emmc_nand_d07", - "emmc_cmd", - "emmc_clk"; - function = "emmc"; - }; - }; - - nor_pins: nor { - mux { - groups = "nor_d", - "nor_q", - "nor_c", - "nor_cs"; - function = "nor"; - }; - }; - - sdcard_pins: sdcard { - mux { - groups = "sdcard_d0", - "sdcard_d1", - "sdcard_d2", - "sdcard_d3", - "sdcard_cmd", - "sdcard_clk"; - function = "sdcard"; - }; - }; - - sdio_pins: sdio { - mux { - groups = "sdio_d0", - "sdio_d1", - "sdio_d2", - "sdio_d3", - "sdio_cmd", - "sdio_clk"; - function = "sdio"; - }; - }; - - sdio_irq_pins: sdio_irq { - mux { - groups = "sdio_irq"; - function = "sdio"; - }; - }; - - uart_a_pins: uart_a { - mux { - groups = "uart_tx_a", - "uart_rx_a"; - function = "uart_a"; - }; - }; - - uart_b_pins: uart_b { - mux { - groups = "uart_tx_b", - "uart_rx_b"; - function = "uart_b"; - }; - }; - - uart_c_pins: uart_c { - mux { - groups = "uart_tx_c", - "uart_rx_c"; - function = "uart_c"; - }; - }; - - i2c_a_pins: i2c_a { - mux { - groups = "i2c_sck_a", - "i2c_sda_a"; - function = "i2c_a"; - }; - }; - - i2c_b_pins: i2c_b { - mux { - groups = "i2c_sck_b", - "i2c_sda_b"; - function = "i2c_b"; - }; - }; - - i2c_c_pins: i2c_c { - mux { - groups = "i2c_sck_c", - "i2c_sda_c"; - function = "i2c_c"; - }; - }; - - eth_pins: eth_c { - mux { - groups = "eth_mdio", - "eth_mdc", - "eth_clk_rx_clk", - "eth_rx_dv", - "eth_rxd0", - "eth_rxd1", - "eth_rxd2", - "eth_rxd3", - "eth_rgmii_tx_clk", - "eth_tx_en", - "eth_txd0", - "eth_txd1", - "eth_txd2", - "eth_txd3"; - function = "eth"; - }; - }; - - pwm_a_x_pins: pwm_a_x { - mux { - groups = "pwm_a_x"; - function = "pwm_a_x"; - }; - }; - - pwm_a_y_pins: pwm_a_y { - mux { - groups = "pwm_a_y"; - function = "pwm_a_y"; - }; - }; - - pwm_b_pins: pwm_b { - mux { - groups = "pwm_b"; - function = "pwm_b"; - }; - }; - - pwm_d_pins: pwm_d { - mux { - groups = "pwm_d"; - function = "pwm_d"; - }; - }; - - pwm_e_pins: pwm_e { - mux { - groups = "pwm_e"; - function = "pwm_e"; - }; - }; - - pwm_f_x_pins: pwm_f_x { - mux { - groups = "pwm_f_x"; - function = "pwm_f_x"; - }; - }; - - pwm_f_y_pins: pwm_f_y { - mux { - groups = "pwm_f_y"; - function = "pwm_f_y"; - }; - }; + eth_rgmii_pins: eth-rgmii { + mux { + groups = "eth_mdio", + "eth_mdc", + "eth_clk_rx_clk", + "eth_rx_dv", + "eth_rxd0", + "eth_rxd1", + "eth_rxd2", + "eth_rxd3", + "eth_rgmii_tx_clk", + "eth_tx_en", + "eth_txd0", + "eth_txd1", + "eth_txd2", + "eth_txd3"; + function = "eth"; }; }; - hiubus: hiubus@c883c000 { - compatible = "simple-bus"; - reg = <0x0 0xc883c000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; + eth_rmii_pins: eth-rmii { + mux { + groups = "eth_mdio", + "eth_mdc", + "eth_clk_rx_clk", + "eth_rx_dv", + "eth_rxd0", + "eth_rxd1", + "eth_tx_en", + "eth_txd0", + "eth_txd1"; + function = "eth"; + }; + }; - clkc: clock-controller@0 { - compatible = "amlogic,gxbb-clkc"; - #clock-cells = <1>; - reg = <0x0 0x0 0x0 0x3db>; + pwm_a_x_pins: pwm_a_x { + mux { + groups = "pwm_a_x"; + function = "pwm_a_x"; }; + }; - mailbox: mailbox@404 { - compatible = "amlogic,meson-gxbb-mhu"; - reg = <0 0x404 0 0x4c>; - interrupts = <0 208 IRQ_TYPE_EDGE_RISING>, - <0 209 IRQ_TYPE_EDGE_RISING>, - <0 210 IRQ_TYPE_EDGE_RISING>; - #mbox-cells = <1>; + pwm_a_y_pins: pwm_a_y { + mux { + groups = "pwm_a_y"; + function = "pwm_a_y"; }; }; - apb: apb@d0000000 { - compatible = "simple-bus"; - reg = <0x0 0xd0000000 0x0 0x200000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>; + pwm_b_pins: pwm_b { + mux { + groups = "pwm_b"; + function = "pwm_b"; + }; }; - usb0: usb@c9000000 { - compatible = "amlogic,meson-gxbb-usb", "snps,dwc2"; - reg = <0x0 0xc9000000 0x0 0x40000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_USB0_DDR_BRIDGE>; - clock-names = "otg"; - phys = <&usb0_phy>; - phy-names = "usb2-phy"; - dr_mode = "host"; - status = "disabled"; + pwm_d_pins: pwm_d { + mux { + groups = "pwm_d"; + function = "pwm_d"; + }; }; - usb1: usb@c9100000 { - compatible = "amlogic,meson-gxbb-usb", "snps,dwc2"; - reg = <0x0 0xc9100000 0x0 0x40000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; - clock-names = "otg"; - phys = <&usb1_phy>; - phy-names = "usb2-phy"; - dr_mode = "host"; - status = "disabled"; + pwm_e_pins: pwm_e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + }; }; - ethmac: ethernet@c9410000 { - compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac"; - reg = <0x0 0xc9410000 0x0 0x10000 - 0x0 0xc8834540 0x0 0x4>; - interrupts = <0 8 1>; - interrupt-names = "macirq"; - clocks = <&clkc CLKID_ETH>, - <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; - phy-mode = "rgmii"; - status = "disabled"; + pwm_f_x_pins: pwm_f_x { + mux { + groups = "pwm_f_x"; + function = "pwm_f_x"; + }; }; + + pwm_f_y_pins: pwm_f_y { + mux { + groups = "pwm_f_y"; + function = "pwm_f_y"; + }; + }; + }; +}; + +&hiubus { + clkc: clock-controller@0 { + compatible = "amlogic,gxbb-clkc"; + #clock-cells = <1>; + reg = <0x0 0x0 0x0 0x3db>; }; }; + +&i2c_A { + clocks = <&clkc CLKID_I2C>; +}; + +&i2c_B { + clocks = <&clkc CLKID_I2C>; +}; + +&i2c_C { + clocks = <&clkc CLKID_I2C>; +}; + +&sd_emmc_a { + clocks = <&clkc CLKID_SD_EMMC_A>, + <&xtal>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; +}; + +&sd_emmc_b { + clocks = <&clkc CLKID_SD_EMMC_B>, + <&xtal>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; +}; + +&sd_emmc_c { + clocks = <&clkc CLKID_SD_EMMC_C>, + <&xtal>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts new file mode 100644 index 000000000000..4d082a7fdf51 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts @@ -0,0 +1,76 @@ +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxl-s905d-p23x.dtsi" + +/ { + compatible = "amlogic,p230", "amlogic,s905d", "amlogic,meson-gxl"; + model = "Amlogic Meson GXL (S905D) P230 Development Board"; +}; + +/* P230 has exclusive choice between internal or external PHY */ +ðmac { + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; + + /* Select external PHY by default */ + phy-handle = <&external_phy>; + + /* External PHY reset is shared with internal PHY Led signals */ + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + /* External PHY is in RGMII */ + phy-mode = "rgmii"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + max-speed = <1000>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts new file mode 100644 index 000000000000..1cc8d49d85e4 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts @@ -0,0 +1,57 @@ +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxl-s905d-p23x.dtsi" + +/ { + compatible = "amlogic,p231", "amlogic,s905d", "amlogic,meson-gxl"; + model = "Amlogic Meson GXL (S905D) P231 Development Board"; +}; + +/* P231 has only internal PHY port */ +ðmac { + phy-mode = "rmii"; + phy-handle = <&internal_phy>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi new file mode 100644 index 000000000000..622ffbeba336 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi @@ -0,0 +1,188 @@ +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "meson-gxl-s905d.dtsi" + +/ { + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; +}; + +/* This UART is brought out to the DB9 connector */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +ðmac { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi new file mode 100644 index 000000000000..615308e55576 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "meson-gxl.dtsi" + +/ { + compatible = "amlogic,s905d", "amlogic,meson-gxl"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts new file mode 100644 index 000000000000..9639f012b02b --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts @@ -0,0 +1,69 @@ +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxl-s905x.dtsi" + +/ { + compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl"; + model = "Amlogic Meson GXL (S905X) P212 Development Board"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +/* This UART is brought out to the DB9 connector */ +&uart_AO { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi new file mode 100644 index 000000000000..08237ee1e362 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi @@ -0,0 +1,54 @@ +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "meson-gxl.dtsi" + +/ { + compatible = "amlogic,s905x", "amlogic,meson-gxl"; +}; + +/* S905X Only has access to its internal PHY */ +ðmac { + phy-mode = "rmii"; + phy-handle = <&internal_phy>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi new file mode 100644 index 000000000000..9f89b99c4806 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -0,0 +1,301 @@ +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "meson-gx.dtsi" +#include <dt-bindings/clock/gxbb-clkc.h> +#include <dt-bindings/gpio/meson-gxbb-gpio.h> + +/ { + compatible = "amlogic,meson-gxl"; +}; + +ðmac { + reg = <0x0 0xc9410000 0x0 0x10000 + 0x0 0xc8834540 0x0 0x4>; + + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; +}; + +&aobus { + pinctrl_aobus: pinctrl@14 { + compatible = "amlogic,meson-gxl-aobus-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio_ao: bank@14 { + reg = <0x0 0x00014 0x0 0x8>, + <0x0 0x0002c 0x0 0x4>, + <0x0 0x00024 0x0 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; + }; + + remote_input_ao_pins: remote_input_ao { + mux { + groups = "remote_input_ao"; + function = "remote_input_ao"; + }; + }; + }; +}; + +&periphs { + pinctrl_periphs: pinctrl@4b0 { + compatible = "amlogic,meson-gxl-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@4b0 { + reg = <0x0 0x004b0 0x0 0x28>, + <0x0 0x004e8 0x0 0x14>, + <0x0 0x00120 0x0 0x14>, + <0x0 0x00430 0x0 0x40>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + emmc_pins: emmc { + mux { + groups = "emmc_nand_d07", + "emmc_cmd", + "emmc_clk", + "emmc_ds"; + function = "emmc"; + }; + }; + + sdcard_pins: sdcard { + mux { + groups = "sdcard_d0", + "sdcard_d1", + "sdcard_d2", + "sdcard_d3", + "sdcard_cmd", + "sdcard_clk"; + function = "sdcard"; + }; + }; + + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_cmd", + "sdio_clk"; + function = "sdio"; + }; + }; + + sdio_irq_pins: sdio_irq { + mux { + groups = "sdio_irq"; + function = "sdio"; + }; + }; + + uart_a_pins: uart_a { + mux { + groups = "uart_tx_a", + "uart_rx_a"; + function = "uart_a"; + }; + }; + + uart_b_pins: uart_b { + mux { + groups = "uart_tx_b", + "uart_rx_b"; + function = "uart_b"; + }; + }; + + uart_c_pins: uart_c { + mux { + groups = "uart_tx_c", + "uart_rx_c"; + function = "uart_c"; + }; + }; + + i2c_a_pins: i2c_a { + mux { + groups = "i2c_sck_a", + "i2c_sda_a"; + function = "i2c_a"; + }; + }; + + i2c_b_pins: i2c_b { + mux { + groups = "i2c_sck_b", + "i2c_sda_b"; + function = "i2c_b"; + }; + }; + + i2c_c_pins: i2c_c { + mux { + groups = "i2c_sck_c", + "i2c_sda_c"; + function = "i2c_c"; + }; + }; + + eth_pins: eth_c { + mux { + groups = "eth_mdio", + "eth_mdc", + "eth_clk_rx_clk", + "eth_rx_dv", + "eth_rxd0", + "eth_rxd1", + "eth_rxd2", + "eth_rxd3", + "eth_rgmii_tx_clk", + "eth_tx_en", + "eth_txd0", + "eth_txd1", + "eth_txd2", + "eth_txd3"; + function = "eth"; + }; + }; + + pwm_e_pins: pwm_e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + }; + }; + }; + + eth-phy-mux { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x55c 0x0 0x4>; + mux-mask = <0xffffffff>; + mdio-parent-bus = <&mdio0>; + + internal_mdio: mdio@e40908ff { + reg = <0xe40908ff>; + #address-cells = <1>; + #size-cells = <0>; + + internal_phy: ethernet-phy@8 { + compatible = "ethernet-phy-id0181.4400", "ethernet-phy-ieee802.3-c22"; + reg = <8>; + max-speed = <100>; + }; + }; + + external_mdio: mdio@2009087f { + reg = <0x2009087f>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&hiubus { + clkc: clock-controller@0 { + compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc"; + #clock-cells = <1>; + reg = <0x0 0x0 0x0 0x3db>; + }; +}; + +&i2c_A { + clocks = <&clkc CLKID_I2C>; +}; + +&i2c_B { + clocks = <&clkc CLKID_I2C>; +}; + +&i2c_C { + clocks = <&clkc CLKID_I2C>; +}; + +&sd_emmc_a { + clocks = <&clkc CLKID_SD_EMMC_A>, + <&xtal>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; +}; + +&sd_emmc_b { + clocks = <&clkc CLKID_SD_EMMC_B>, + <&xtal>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; +}; + +&sd_emmc_c { + clocks = <&clkc CLKID_SD_EMMC_C>, + <&xtal>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; +}; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 334271a25f70..100810a8b929 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -29,6 +29,28 @@ clock-names = "apb_pclk"; }; + smmu_pcie: iommu@2b500000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x2b500000 0x0 0x10000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + dma-coherent; + status = "disabled"; + }; + + smmu_etr: iommu@2b600000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x2b600000 0x0 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + dma-coherent; + status = "disabled"; + }; + gic: interrupt-controller@2c010000 { compatible = "arm,gic-400", "arm,cortex-a15-gic"; reg = <0x0 0x2c010000 0 0x1000>, @@ -146,6 +168,7 @@ etr@20070000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0 0x20070000 0 0x1000>; + iommus = <&smmu_etr 0>; clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; @@ -404,6 +427,8 @@ <0 0 0 4 &gic 0 0 0 139 4>; msi-parent = <&v2m_0>; status = "disabled"; + iommu-map-mask = <0x0>; /* RC has no means to output PCI RID */ + iommu-map = <0x0 &smmu_pcie 0x0 0x1>; }; scpi { @@ -484,6 +509,48 @@ /include/ "juno-clocks.dtsi" + smmu_dma: iommu@7fb00000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x7fb00000 0x0 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + dma-coherent; + status = "disabled"; + }; + + smmu_hdlcd1: iommu@7fb10000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x7fb10000 0x0 0x10000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + status = "disabled"; + }; + + smmu_hdlcd0: iommu@7fb20000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x7fb20000 0x0 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + status = "disabled"; + }; + + smmu_usb: iommu@7fb30000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x7fb30000 0x0 0x10000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + dma-coherent; + status = "disabled"; + }; + dma@7ff00000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0x7ff00000 0 0x1000>; @@ -499,6 +566,15 @@ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&smmu_dma 0>, + <&smmu_dma 1>, + <&smmu_dma 2>, + <&smmu_dma 3>, + <&smmu_dma 4>, + <&smmu_dma 5>, + <&smmu_dma 6>, + <&smmu_dma 7>, + <&smmu_dma 8>; clocks = <&soc_faxiclk>; clock-names = "apb_pclk"; }; @@ -507,6 +583,7 @@ compatible = "arm,hdlcd"; reg = <0 0x7ff50000 0 0x1000>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&smmu_hdlcd1 0>; clocks = <&scpi_clk 3>; clock-names = "pxlclk"; @@ -521,6 +598,7 @@ compatible = "arm,hdlcd"; reg = <0 0x7ff60000 0 0x1000>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&smmu_hdlcd0 0>; clocks = <&scpi_clk 3>; clock-names = "pxlclk"; @@ -574,6 +652,7 @@ compatible = "generic-ohci"; reg = <0x0 0x7ffb0000 0x0 0x10000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&smmu_usb 0>; clocks = <&soc_usb48mhz>; }; @@ -581,6 +660,7 @@ compatible = "generic-ehci"; reg = <0x0 0x7ffc0000 0x0 0x10000>; interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&smmu_usb 0>; clocks = <&soc_usb48mhz>; }; diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index 123a58b29cbd..3be8a3ef671c 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -90,6 +90,7 @@ next-level-cache = <&A57_L2>; clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <1024>; }; A57_1: cpu@1 { @@ -100,6 +101,7 @@ next-level-cache = <&A57_L2>; clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <1024>; }; A53_0: cpu@100 { @@ -110,6 +112,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <578>; }; A53_1: cpu@101 { @@ -120,6 +123,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <578>; }; A53_2: cpu@102 { @@ -130,6 +134,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <578>; }; A53_3: cpu@103 { @@ -140,6 +145,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <578>; }; A57_L2: l2-cache0 { diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts index 007be826efce..614fc9227943 100644 --- a/arch/arm64/boot/dts/arm/juno-r2.dts +++ b/arch/arm64/boot/dts/arm/juno-r2.dts @@ -90,6 +90,7 @@ next-level-cache = <&A72_L2>; clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <1024>; }; A72_1: cpu@1 { @@ -100,6 +101,7 @@ next-level-cache = <&A72_L2>; clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <1024>; }; A53_0: cpu@100 { @@ -110,6 +112,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <485>; }; A53_1: cpu@101 { @@ -120,6 +123,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <485>; }; A53_2: cpu@102 { @@ -130,6 +134,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <485>; }; A53_3: cpu@103 { @@ -140,6 +145,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <485>; }; A72_L2: l2-cache0 { diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index a7270eff6939..6b4135e9cfe5 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -90,6 +90,7 @@ next-level-cache = <&A57_L2>; clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <1024>; }; A57_1: cpu@1 { @@ -100,6 +101,7 @@ next-level-cache = <&A57_L2>; clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <1024>; }; A53_0: cpu@100 { @@ -110,6 +112,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <578>; }; A53_1: cpu@101 { @@ -120,6 +123,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <578>; }; A53_2: cpu@102 { @@ -130,6 +134,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <578>; }; A53_3: cpu@103 { @@ -140,6 +145,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <578>; }; A57_L2: l2-cache0 { diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile index 50c9b9383cfa..7ddea53769a7 100644 --- a/arch/arm64/boot/dts/exynos/Makefile +++ b/arch/arm64/boot/dts/exynos/Makefile @@ -1,4 +1,7 @@ -dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb +dtb-$(CONFIG_ARCH_EXYNOS) += \ + exynos5433-tm2.dtb \ + exynos5433-tm2e.dtb \ + exynos7-espresso.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi new file mode 100644 index 000000000000..796881310bf6 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi @@ -0,0 +1,794 @@ +/* + * Samsung's Exynos5433 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * Chanwoo Choi <cw00.choi@samsung.com> + * + * Samsung's Exynos5433 SoC pin-mux and pin-config options are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define PIN_PULL_NONE 0 +#define PIN_PULL_DOWN 1 +#define PIN_PULL_UP 3 + +#define PIN_DRV_LV1 0 +#define PIN_DRV_LV2 2 +#define PIN_DRV_LV3 1 +#define PIN_DRV_LV4 3 + +#define PIN_IN 0 +#define PIN_OUT 1 +#define PIN_FUNC1 2 + +#define PIN(_func, _pin, _pull, _drv) \ + _pin { \ + samsung,pins = #_pin; \ + samsung,pin-function = <PIN_ ##_func>; \ + samsung,pin-pud = <PIN_PULL_ ##_pull>; \ + samsung,pin-drv = <PIN_DRV_ ##_drv>; \ + } + +&pinctrl_alive { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 0 0>, <GIC_SPI 1 0>, <GIC_SPI 2 0>, + <GIC_SPI 3 0>, <GIC_SPI 4 0>, <GIC_SPI 5 0>, + <GIC_SPI 6 0>, <GIC_SPI 7 0>; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 8 0>, <GIC_SPI 9 0>, <GIC_SPI 10 0>, + <GIC_SPI 11 0>, <GIC_SPI 12 0>, <GIC_SPI 13 0>, + <GIC_SPI 14 0>, <GIC_SPI 15 0>; + #interrupt-cells = <2>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa3: gpa3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf4: gpf4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf5: gpf5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_aud { + gpz0: gpz0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpz1: gpz1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2s0_bus: i2s0-bus { + samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3", + "gpz0-4", "gpz0-5", "gpz0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + pcm0_bus: pcm0-bus { + samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + uart_aud_bus: uart-aud-bus { + samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_cpif { + gpv6: gpv6 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_ese { + gpj2: gpj2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_finger { + gpd5: gpd5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c6_bus: hs-i2c6-bus { + samsung,pins = "gpd5-3", "gpd5-2"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_fsys { + gph1: gph1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr4: gpr4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr0: gpr0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr1: gpr1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr2: gpr2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr3: gpr3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpr0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpr0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_rdqs: sd0-rdqs { + samsung,pins = "gpr0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <3>; + }; + + sd0_qrdy: sd0-qrdy { + samsung,pins = "gpr0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpr1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpr2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpr2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpr3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus8: sd1-bus-width8 { + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + pcie_bus: pcie_bus { + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpr4-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpr4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpr4-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpr4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_clk_output: sd2-clk-output { + samsung,pins = "gpr4-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + sd2_cmd_output: sd2-cmd-output { + samsung,pins = "gpr4-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; +}; + +&pinctrl_imem { + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_nfc { + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + hs_i2c4_bus: hs-i2c4-bus { + samsung,pins = "gpj0-1", "gpj0-0"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_peric { + gpv7: gpv7 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd2: gpd2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd4: gpd4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd8: gpd8 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd6: gpd6 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd7: gpd7 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg3: gpg3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + hs_i2c8_bus: hs-i2c8-bus { + samsung,pins = "gpb0-1", "gpb0-0"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c9_bus: hs-i2c9-bus { + samsung,pins = "gpb0-3", "gpb0-2"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2", + "gpd4-3", "gpd4-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2", + "gpd4-3", "gpd4-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + spdif_bus: spdif-bus { + samsung,pins = "gpd4-3", "gpd4-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + fimc_is_spi_pin0: fimc-is-spi-pin0 { + samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_spi_pin1: fimc-is-spi-pin1 { + samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_bus: uart0-bus { + samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + hs_i2c2_bus: hs-i2c2-bus { + samsung,pins = "gpd0-3", "gpd0-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart2_bus: uart2-bus { + samsung,pins = "gpd1-5", "gpd1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + uart1_bus: uart1-bus { + samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + hs_i2c3_bus: hs-i2c3-bus { + samsung,pins = "gpd1-3", "gpd1-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c0_bus: hs-i2c0-bus { + samsung,pins = "gpd2-1", "gpd2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c1_bus: hs-i2c1-bus { + samsung,pins = "gpd2-3", "gpd2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd2-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd2-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd2-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c7_bus: hs-i2c7-bus { + samsung,pins = "gpd2-7", "gpd2-6"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c10_bus: hs-i2c10-bus { + samsung,pins = "gpg3-1", "gpg3-0"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c11_bus: hs-i2c11-bus { + samsung,pins = "gpg3-3", "gpg3-2"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi3_bus: spi3-bus { + samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi4_bus: spi4-bus { + samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + fimc_is_uart: fimc-is-uart { + samsung,pins = "gpc1-1", "gpc0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_ch0_i2c: fimc-is-ch0_i2c { + samsung,pins = "gpc2-1", "gpc2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_ch0_mclk: fimc-is-ch0_mclk { + samsung,pins = "gpd7-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_ch1_i2c: fimc-is-ch1-i2c { + samsung,pins = "gpc2-3", "gpc2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_ch1_mclk: fimc-is-ch1-mclk { + samsung,pins = "gpd7-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_ch2_i2c: fimc-is-ch2-i2c { + samsung,pins = "gpc2-5", "gpc2-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_ch2_mclk: fimc-is-ch2-mclk { + samsung,pins = "gpd7-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_touch { + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + hs_i2c5_bus: hs-i2c5-bus { + samsung,pins = "gpj1-1", "gpj1-0"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts new file mode 100644 index 000000000000..9ea3f32bae9e --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -0,0 +1,974 @@ +/* + * SAMSUNG Exynos5433 TM2 board device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * + * Device tree source file for Samsung's TM2 board which is based on + * Samsung Exynos5433 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "exynos5433.dtsi" +#include <dt-bindings/clock/samsung,s2mps11.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Samsung TM2 board"; + compatible = "samsung,tm2", "samsung,exynos5433"; + + aliases { + pinctrl0 = &pinctrl_alive; + pinctrl1 = &pinctrl_aud; + pinctrl2 = &pinctrl_cpif; + pinctrl3 = &pinctrl_ese; + pinctrl4 = &pinctrl_finger; + pinctrl5 = &pinctrl_fsys; + pinctrl6 = &pinctrl_imem; + pinctrl7 = &pinctrl_nfc; + pinctrl8 = &pinctrl_peric; + pinctrl9 = &pinctrl_touch; + serial0 = &serial_0; + serial1 = &serial_1; + serial2 = &serial_2; + serial3 = &serial_3; + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; + spi3 = &spi_3; + spi4 = &spi_4; + }; + + chosen { + stdout-path = &serial_1; + }; + + memory@20000000 { + device_type = "memory"; + reg = <0x0 0x20000000 0x0 0xc0000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power-key { + gpios = <&gpa2 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "power key"; + debounce-interval = <10>; + }; + + volume-up-key { + gpios = <&gpa2 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + label = "volume-up key"; + debounce-interval = <10>; + }; + + volume-down-key { + gpios = <&gpa2 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + label = "volume-down key"; + debounce-interval = <10>; + }; + + homepage-key { + gpios = <&gpa0 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + label = "homepage key"; + debounce-interval = <10>; + }; + }; + + i2c_max98504: i2c-gpio-0 { + compatible = "i2c-gpio"; + gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */ + &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + max98504: max98504@31 { + compatible = "maxim,max98504"; + reg = <0x31>; + maxim,rx-path = <1>; + maxim,tx-path = <1>; + maxim,tx-channel-mask = <3>; + maxim,tx-channel-source = <2>; + }; + }; + + sound { + compatible = "samsung,tm2-audio"; + audio-codec = <&wm5110>; + i2s-controller = <&i2s0>; + audio-amplifier = <&max98504>; + mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; + model = "wm5110"; + samsung,audio-routing = + /* Headphone */ + "HP", "HPOUT1L", + "HP", "HPOUT1R", + + /* Speaker */ + "SPK", "SPKOUT", + "SPKOUT", "HPOUT2L", + "SPKOUT", "HPOUT2R", + + /* Receiver */ + "RCV", "HPOUT3L", + "RCV", "HPOUT3R"; + status = "okay"; + }; +}; + +&adc { + vdd-supply = <&ldo3_reg>; + status = "okay"; + + thermistor-ap { + compatible = "murata,ncp03wf104"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <0>; + io-channels = <&adc 0>; + }; + + thermistor-battery { + compatible = "murata,ncp03wf104"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <0>; + io-channels = <&adc 1>; + #thermal-sensor-cells = <0>; + }; + + thermistor-charger { + compatible = "murata,ncp03wf104"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <0>; + io-channels = <&adc 2>; + }; +}; + +&cpu0 { + cpu-supply = <&buck3_reg>; +}; + +&cpu4 { + cpu-supply = <&buck2_reg>; +}; + +&decon { + status = "okay"; + + i80-if-timings { + }; +}; + +&dsi { + status = "okay"; + vddcore-supply = <&ldo6_reg>; + vddio-supply = <&ldo7_reg>; + samsung,pll-clock-frequency = <24000000>; + pinctrl-names = "default"; + pinctrl-0 = <&te_irq>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi_out: endpoint { + samsung,burst-clock-frequency = <512000000>; + samsung,esc-clock-frequency = <16000000>; + }; + }; + }; +}; + +&hsi2c_0 { + status = "okay"; + clock-frequency = <2500000>; + + s2mps13-pmic@66 { + compatible = "samsung,s2mps13-pmic"; + interrupt-parent = <&gpa0>; + interrupts = <7 IRQ_TYPE_NONE>; + reg = <0x66>; + samsung,s2mps11-wrstbi-ground; + + s2mps13_osc: clocks { + compatible = "samsung,s2mps13-clk"; + #clock-cells = <1>; + clock-output-names = "s2mps13_ap", "s2mps13_cp", + "s2mps13_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_0.9V_AP"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDDQ_MMC2_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo3_reg: LDO3 { + regulator-name = "VDD1_E_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD10_MIF_PLL_1.0V_AP"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo5_reg: LDO5 { + regulator-name = "VDD10_DPLL_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD10_MIPI2L_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD18_MIPI2L_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VDD18_LLI_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo9_reg: LDO9 { + regulator-name = "VDD18_ABB_ETC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD33_USB30_3.0V_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_INT_M_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD_KFC_M_1.1V_AP"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "VDD_G3D_M_0.95V_AP"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo14_reg: LDO14 { + regulator-name = "VDDQ_M1_LDO_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo15_reg: LDO15 { + regulator-name = "VDDQ_M2_LDO_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo16_reg: LDO16 { + regulator-name = "VDDQ_EFUSE"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <3400000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "V_TFLASH_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo18_reg: LDO18 { + regulator-name = "V_CODEC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "VDDA_1.8V_COMP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo20_reg: LDO20 { + regulator-name = "VCC_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo22_reg: LDO22 { + regulator-name = "CAM_IO_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "CAM_SEN_CORE_1.2V_AP"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1200000>; + }; + + ldo24_reg: LDO24 { + regulator-name = "VT_CAM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "CAM_SEN_A2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo26_reg: LDO26 { + regulator-name = "CAM_AF_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo27_reg: LDO27 { + regulator-name = "VCC_3.0V_LCD_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo28_reg: LDO28 { + regulator-name = "VCC_1.8V_LCD_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo29_reg: LDO29 { + regulator-name = "VT_CAM_2.8V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo30_reg: LDO30 { + regulator-name = "TSP_AVDD_3.3V_AP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo31_reg: LDO31 { + regulator-name = "TSP_VDD_1.85V_AP"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + ldo32_reg: LDO32 { + regulator-name = "VTOUCH_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo33_reg: LDO33 { + regulator-name = "VTOUCH_LED_3.3V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + }; + + ldo34_reg: LDO34 { + regulator-name = "VCC_1.8V_MHL_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <2100000>; + }; + + ldo35_reg: LDO35 { + regulator-name = "OIS_VM_2.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo36_reg: LDO36 { + regulator-name = "VSIL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo37_reg: LDO37 { + regulator-name = "VF_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo38_reg: LDO38 { + regulator-name = "VCC_3.0V_MOTOR_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo39_reg: LDO39 { + regulator-name = "V_HRM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo40_reg: LDO40 { + regulator-name = "V_HRM_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_MIF_0.9V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck2_reg: BUCK2 { + regulator-name = "VDD_EGL_1.0V_AP"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck3_reg: BUCK3 { + regulator-name = "VDD_KFC_1.0V_AP"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck4_reg: BUCK4 { + regulator-name = "VDD_INT_0.95V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDD_DISP_CAM0_0.9V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck6_reg: BUCK6 { + regulator-name = "VDD_G3D_0.9V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck7_reg: BUCK7 { + regulator-name = "VDD_MEM1_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "VDD_LLDO_1.35V_AP"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "VDD_MLDO_2.0V_AP"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_mem2"; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + }; + }; +}; + +&hsi2c_8 { + status = "okay"; + + max77843@66 { + compatible = "maxim,max77843"; + interrupt-parent = <&gpa1>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reg = <0x66>; + + muic: max77843-muic { + compatible = "maxim,max77843-muic"; + }; + + regulators { + compatible = "maxim,max77843-regulator"; + safeout1_reg: SAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + safeout2_reg: SAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + charger_reg: CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <100000>; + regulator-max-microamp = <3150000>; + }; + }; + + haptic: max77843-haptic { + compatible = "maxim,max77843-haptic"; + haptic-supply = <&ldo38_reg>; + pwms = <&pwm 0 33670 0>; + pwm-names = "haptic"; + }; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&mshc_0 { + status = "okay"; + num-slots = <1>; + non-removable; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 3>; + samsung,read-strobe-delay = <90>; + fifo-depth = <0x80>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 + &sd0_bus8 &sd0_rdqs>; + bus-width = <8>; + assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>; + assigned-clock-rates = <800000000>; +}; + +&pinctrl_alive { + pinctrl-names = "default"; + pinctrl-0 = <&initial_alive>; + + initial_alive: initial-state { + PIN(IN, gpa0-0, DOWN, LV1); + PIN(IN, gpa0-1, NONE, LV1); + PIN(IN, gpa0-2, DOWN, LV1); + PIN(IN, gpa0-3, NONE, LV1); + PIN(IN, gpa0-4, NONE, LV1); + PIN(IN, gpa0-5, DOWN, LV1); + PIN(IN, gpa0-6, NONE, LV1); + PIN(IN, gpa0-7, NONE, LV1); + + PIN(IN, gpa1-0, UP, LV1); + PIN(IN, gpa1-1, NONE, LV1); + PIN(IN, gpa1-2, NONE, LV1); + PIN(IN, gpa1-3, DOWN, LV1); + PIN(IN, gpa1-4, DOWN, LV1); + PIN(IN, gpa1-5, NONE, LV1); + PIN(IN, gpa1-6, NONE, LV1); + PIN(IN, gpa1-7, NONE, LV1); + + PIN(IN, gpa2-0, NONE, LV1); + PIN(IN, gpa2-1, NONE, LV1); + PIN(IN, gpa2-2, NONE, LV1); + PIN(IN, gpa2-3, DOWN, LV1); + PIN(IN, gpa2-4, NONE, LV1); + PIN(IN, gpa2-5, DOWN, LV1); + PIN(IN, gpa2-6, DOWN, LV1); + PIN(IN, gpa2-7, NONE, LV1); + + PIN(IN, gpa3-0, DOWN, LV1); + PIN(IN, gpa3-1, DOWN, LV1); + PIN(IN, gpa3-2, NONE, LV1); + PIN(IN, gpa3-3, DOWN, LV1); + PIN(IN, gpa3-4, NONE, LV1); + PIN(IN, gpa3-5, DOWN, LV1); + PIN(IN, gpa3-6, DOWN, LV1); + PIN(IN, gpa3-7, DOWN, LV1); + + PIN(IN, gpf1-0, NONE, LV1); + PIN(IN, gpf1-1, NONE, LV1); + PIN(IN, gpf1-2, DOWN, LV1); + PIN(IN, gpf1-4, UP, LV1); + PIN(OUT, gpf1-5, NONE, LV1); + PIN(IN, gpf1-6, DOWN, LV1); + PIN(IN, gpf1-7, DOWN, LV1); + + PIN(IN, gpf2-0, DOWN, LV1); + PIN(IN, gpf2-1, DOWN, LV1); + PIN(IN, gpf2-2, DOWN, LV1); + PIN(IN, gpf2-3, DOWN, LV1); + + PIN(IN, gpf3-0, DOWN, LV1); + PIN(IN, gpf3-1, DOWN, LV1); + PIN(IN, gpf3-2, NONE, LV1); + PIN(IN, gpf3-3, DOWN, LV1); + + PIN(IN, gpf4-0, DOWN, LV1); + PIN(IN, gpf4-1, DOWN, LV1); + PIN(IN, gpf4-2, DOWN, LV1); + PIN(IN, gpf4-3, DOWN, LV1); + PIN(IN, gpf4-4, DOWN, LV1); + PIN(IN, gpf4-5, DOWN, LV1); + PIN(IN, gpf4-6, DOWN, LV1); + PIN(IN, gpf4-7, DOWN, LV1); + + PIN(IN, gpf5-0, DOWN, LV1); + PIN(IN, gpf5-1, DOWN, LV1); + PIN(IN, gpf5-2, DOWN, LV1); + PIN(IN, gpf5-3, DOWN, LV1); + PIN(OUT, gpf5-4, NONE, LV1); + PIN(IN, gpf5-5, DOWN, LV1); + PIN(IN, gpf5-6, DOWN, LV1); + PIN(IN, gpf5-7, DOWN, LV1); + }; + + te_irq: te_irq { + samsung,pins = "gpf1-3"; + samsung,pin-function = <0xf>; + }; +}; + +&pinctrl_cpif { + pinctrl-names = "default"; + pinctrl-0 = <&initial_cpif>; + + initial_cpif: initial-state { + PIN(IN, gpv6-0, DOWN, LV1); + PIN(IN, gpv6-1, DOWN, LV1); + }; +}; + +&pinctrl_ese { + pinctrl-names = "default"; + pinctrl-0 = <&initial_ese>; + + initial_ese: initial-state { + PIN(IN, gpj2-0, DOWN, LV1); + PIN(IN, gpj2-1, DOWN, LV1); + PIN(IN, gpj2-2, DOWN, LV1); + }; +}; + +&pinctrl_fsys { + pinctrl-names = "default"; + pinctrl-0 = <&initial_fsys>; + + initial_fsys: initial-state { + PIN(IN, gpr3-0, NONE, LV1); + PIN(IN, gpr3-1, DOWN, LV1); + PIN(IN, gpr3-2, DOWN, LV1); + PIN(IN, gpr3-3, DOWN, LV1); + PIN(IN, gpr3-7, NONE, LV1); + }; +}; + +&pinctrl_imem { + pinctrl-names = "default"; + pinctrl-0 = <&initial_imem>; + + initial_imem: initial-state { + PIN(IN, gpf0-0, UP, LV1); + PIN(IN, gpf0-1, UP, LV1); + PIN(IN, gpf0-2, DOWN, LV1); + PIN(IN, gpf0-3, UP, LV1); + PIN(IN, gpf0-4, DOWN, LV1); + PIN(IN, gpf0-5, NONE, LV1); + PIN(IN, gpf0-6, DOWN, LV1); + PIN(IN, gpf0-7, UP, LV1); + }; +}; + +&pinctrl_nfc { + pinctrl-names = "default"; + pinctrl-0 = <&initial_nfc>; + + initial_nfc: initial-state { + PIN(IN, gpj0-2, DOWN, LV1); + }; +}; + +&pinctrl_peric { + pinctrl-names = "default"; + pinctrl-0 = <&initial_peric>; + + initial_peric: initial-state { + PIN(IN, gpv7-0, DOWN, LV1); + PIN(IN, gpv7-1, DOWN, LV1); + PIN(IN, gpv7-2, NONE, LV1); + PIN(IN, gpv7-3, DOWN, LV1); + PIN(IN, gpv7-4, DOWN, LV1); + PIN(IN, gpv7-5, DOWN, LV1); + + PIN(IN, gpb0-4, DOWN, LV1); + + PIN(IN, gpc0-2, DOWN, LV1); + PIN(IN, gpc0-5, DOWN, LV1); + PIN(IN, gpc0-7, DOWN, LV1); + + PIN(IN, gpc1-1, DOWN, LV1); + + PIN(IN, gpc3-4, NONE, LV1); + PIN(IN, gpc3-5, NONE, LV1); + PIN(IN, gpc3-6, NONE, LV1); + PIN(IN, gpc3-7, NONE, LV1); + + PIN(OUT, gpg0-0, NONE, LV1); + PIN(FUNC1, gpg0-1, DOWN, LV1); + + PIN(IN, gpd2-5, DOWN, LV1); + + PIN(IN, gpd4-0, NONE, LV1); + PIN(IN, gpd4-1, DOWN, LV1); + PIN(IN, gpd4-2, DOWN, LV1); + PIN(IN, gpd4-3, DOWN, LV1); + PIN(IN, gpd4-4, DOWN, LV1); + + PIN(IN, gpd6-3, DOWN, LV1); + + PIN(IN, gpd8-1, UP, LV1); + + PIN(IN, gpg1-0, DOWN, LV1); + PIN(IN, gpg1-1, DOWN, LV1); + PIN(IN, gpg1-2, DOWN, LV1); + PIN(IN, gpg1-3, DOWN, LV1); + PIN(IN, gpg1-4, DOWN, LV1); + + PIN(IN, gpg2-0, DOWN, LV1); + PIN(IN, gpg2-1, DOWN, LV1); + + PIN(IN, gpg3-0, DOWN, LV1); + PIN(IN, gpg3-1, DOWN, LV1); + PIN(IN, gpg3-5, DOWN, LV1); + PIN(IN, gpg3-7, DOWN, LV1); + }; +}; + +&pinctrl_touch { + pinctrl-names = "default"; + pinctrl-0 = <&initial_touch>; + + initial_touch: initial-state { + PIN(IN, gpj1-2, DOWN, LV1); + }; +}; + +&pwm { + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&mic { + status = "okay"; + + i80-if-timings { + }; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_3 { + assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>; + assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>; + status = "okay"; +}; + +&spi_1 { + cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; + status = "okay"; + + wm5110: wm5110-codec@0 { + compatible = "wlf,wm5110"; + reg = <0x0>; + spi-max-frequency = <20000000>; + interrupt-parent = <&gpa0>; + interrupts = <4 IRQ_TYPE_NONE>; + clocks = <&pmu_system_controller 0>, + <&s2mps13_osc S2MPS11_CLK_BT>; + clock-names = "mclk1", "mclk2"; + + gpio-controller; + #gpio-cells = <2>; + + wlf,micd-detect-debounce = <300>; + wlf,micd-bias-start-time = <0x1>; + wlf,micd-rate = <0x7>; + wlf,micd-dbtime = <0x1>; + wlf,micd-force-micbias; + wlf,micd-configs = <0x0 1 0>; + wlf,hpdet-channel = <1>; + wlf,gpsw = <0x1>; + wlf,inmode = <2 0 2 0>; + + wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>; + wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>; + + /* core supplies */ + AVDD-supply = <&ldo18_reg>; + DBVDD1-supply = <&ldo18_reg>; + CPVDD-supply = <&ldo18_reg>; + DBVDD2-supply = <&ldo18_reg>; + DBVDD3-supply = <&ldo18_reg>; + + controller-data { + samsung,spi-feedback-delay = <0>; + }; + }; +}; + +&timer { + clock-frequency = <24000000>; +}; + +&tmu_atlas0 { + vtmu-supply = <&ldo3_reg>; + status = "okay"; +}; + +&tmu_apollo { + vtmu-supply = <&ldo3_reg>; + status = "okay"; +}; + +&tmu_g3d { + vtmu-supply = <&ldo3_reg>; + status = "okay"; +}; + +&usbdrd30 { + vdd33-supply = <&ldo10_reg>; + vdd10-supply = <&ldo6_reg>; + status = "okay"; +}; + +&usbdrd_dwc3_0 { + dr_mode = "otg"; +}; + +&usbdrd30_phy { + vbus-supply = <&safeout1_reg>; + status = "okay"; +}; + +&xxti { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts new file mode 100644 index 000000000000..1db4e7f363a9 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts @@ -0,0 +1,41 @@ +/* + * SAMSUNG Exynos5433 TM2E board device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * + * Device tree source file for Samsung's TM2E(TM2 EDGE) board which is based on + * Samsung Exynos5433 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "exynos5433-tm2.dts" + +/ { + model = "Samsung TM2E board"; + compatible = "samsung,tm2e", "samsung,exynos5433"; +}; + +&ldo23_reg { + regulator-name = "CAM_SEN_CORE_1.025V_AP"; + regulator-max-microvolt = <1050000>; +}; + +&ldo25_reg { + regulator-name = "UNUSED_LDO25"; + regulator-always-off; +}; + +&ldo31_reg { + regulator-name = "TSP_VDD_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +&ldo38_reg { + regulator-name = "VCC_3.3V_MOTOR_AP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi new file mode 100644 index 000000000000..9be2978f1b9a --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi @@ -0,0 +1,23 @@ +/* + * Device tree sources for Exynos5433 TMU sensor configuration + * + * Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/thermal/thermal_exynos.h> + +#thermal-sensor-cells = <0>; +samsung,tmu_gain = <8>; +samsung,tmu_reference_voltage = <23>; +samsung,tmu_noise_cancel_mode = <4>; +samsung,tmu_efuse_value = <75>; +samsung,tmu_min_efuse_value = <40>; +samsung,tmu_max_efuse_value = <150>; +samsung,tmu_first_point_trim = <25>; +samsung,tmu_second_point_trim = <85>; +samsung,tmu_default_temp_offset = <50>; +samsung,tmu_mux_addr = <6>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi new file mode 100644 index 000000000000..125fe58d77ce --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi @@ -0,0 +1,22 @@ +/* + * Device tree sources for Exynos5433 TMU sensor configuration + * + * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/thermal/thermal_exynos.h> + +#thermal-sensor-cells = <0>; +samsung,tmu_gain = <8>; +samsung,tmu_reference_voltage = <16>; +samsung,tmu_noise_cancel_mode = <4>; +samsung,tmu_efuse_value = <75>; +samsung,tmu_min_efuse_value = <40>; +samsung,tmu_max_efuse_value = <150>; +samsung,tmu_first_point_trim = <25>; +samsung,tmu_second_point_trim = <85>; +samsung,tmu_default_temp_offset = <50>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi new file mode 100644 index 000000000000..ceaa05145b8a --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi @@ -0,0 +1,296 @@ +/* + * Device tree sources for Exynos5433 thermal zone + * + * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/thermal/thermal.h> + +/ { +thermal-zones { + atlas0_thermal: atlas0-thermal { + thermal-sensors = <&tmu_atlas0>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + atlas0_alert_0: atlas0-alert-0 { + temperature = <65000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas0_alert_1: atlas0-alert-1 { + temperature = <70000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas0_alert_2: atlas0-alert-2 { + temperature = <75000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas0_alert_3: atlas0-alert-3 { + temperature = <80000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas0_alert_4: atlas0-alert-4 { + temperature = <85000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas0_alert_5: atlas0-alert-5 { + temperature = <90000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas0_alert_6: atlas0-alert-6 { + temperature = <95000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + }; + + cooling-maps { + map0 { + /* Set maximum frequency as 1800MHz */ + trip = <&atlas0_alert_0>; + cooling-device = <&cpu4 1 2>; + }; + map1 { + /* Set maximum frequency as 1700MHz */ + trip = <&atlas0_alert_1>; + cooling-device = <&cpu4 2 3>; + }; + map2 { + /* Set maximum frequency as 1600MHz */ + trip = <&atlas0_alert_2>; + cooling-device = <&cpu4 3 4>; + }; + map3 { + /* Set maximum frequency as 1500MHz */ + trip = <&atlas0_alert_3>; + cooling-device = <&cpu4 4 5>; + }; + map4 { + /* Set maximum frequency as 1400MHz */ + trip = <&atlas0_alert_4>; + cooling-device = <&cpu4 5 7>; + }; + map5 { + /* Set maximum frequencyas 1200MHz */ + trip = <&atlas0_alert_5>; + cooling-device = <&cpu4 7 9>; + }; + map6 { + /* Set maximum frequency as 1000MHz */ + trip = <&atlas0_alert_6>; + cooling-device = <&cpu4 9 14>; + }; + }; + }; + + atlas1_thermal: atlas1-thermal { + thermal-sensors = <&tmu_atlas1>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + atlas1_alert_0: atlas1-alert-0 { + temperature = <65000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas1_alert_1: atlas1-alert-1 { + temperature = <70000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas1_alert_2: atlas1-alert-2 { + temperature = <75000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas1_alert_3: atlas1-alert-3 { + temperature = <80000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas1_alert_4: atlas1-alert-4 { + temperature = <85000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas1_alert_5: atlas1-alert-5 { + temperature = <90000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas1_alert_6: atlas1-alert-6 { + temperature = <95000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + }; + }; + + g3d_thermal: g3d-thermal { + thermal-sensors = <&tmu_g3d>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + g3d_alert_0: g3d-alert-0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + g3d_alert_1: g3d-alert-1 { + temperature = <75000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + g3d_alert_2: g3d-alert-2 { + temperature = <80000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + g3d_alert_3: g3d-alert-3 { + temperature = <85000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + g3d_alert_4: g3d-alert-4 { + temperature = <90000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + g3d_alert_5: g3d-alert-5 { + temperature = <95000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + g3d_alert_6: g3d-alert-6 { + temperature = <100000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + }; + }; + + apollo_thermal: apollo-thermal { + thermal-sensors = <&tmu_apollo>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + apollo_alert_0: apollo-alert-0 { + temperature = <65000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + apollo_alert_1: apollo-alert-1 { + temperature = <70000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + apollo_alert_2: apollo-alert-2 { + temperature = <75000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + apollo_alert_3: apollo-alert-3 { + temperature = <80000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + apollo_alert_4: apollo-alert-4 { + temperature = <85000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + apollo_alert_5: apollo-alert-5 { + temperature = <90000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + apollo_alert_6: apollo-alert-6 { + temperature = <95000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + }; + + cooling-maps { + map0 { + /* Set maximum frequency as 1200MHz */ + trip = <&apollo_alert_2>; + cooling-device = <&cpu0 1 2>; + }; + map1 { + /* Set maximum frequency as 1100MHz */ + trip = <&apollo_alert_3>; + cooling-device = <&cpu0 2 3>; + }; + map2 { + /* Set maximum frequency as 1000MHz */ + trip = <&apollo_alert_4>; + cooling-device = <&cpu0 3 4>; + }; + map3 { + /* Set maximum frequency as 900MHz */ + trip = <&apollo_alert_5>; + cooling-device = <&cpu0 4 5>; + }; + map4 { + /* Set maximum frequency as 800MHz */ + trip = <&apollo_alert_6>; + cooling-device = <&cpu0 5 9>; + }; + }; + }; + + isp_thermal: isp-thermal { + thermal-sensors = <&tmu_isp>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + isp_alert_0: isp-alert-0 { + temperature = <80000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + isp_alert_1: isp-alert-1 { + temperature = <85000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + isp_alert_2: isp-alert-2 { + temperature = <90000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + isp_alert_3: isp-alert-3 { + temperature = <95000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + isp_alert_4: isp-alert-4 { + temperature = <100000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + isp_alert_5: isp-alert-5 { + temperature = <105000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + isp_alert_6: isp-alert-6 { + temperature = <110000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + }; + }; +}; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi new file mode 100644 index 000000000000..1188630823a7 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -0,0 +1,1356 @@ +/* + * Samsung's Exynos5433 SoC device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * + * Samsung's Exynos5433 SoC device nodes are listed in this file. + * Exynos5433 based board files can include this file and provide + * values for board specific bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos5433 SoC. As device tree coverage for Exynos5433 increases, + * additional nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/clock/exynos5433.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "samsung,exynos5433"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + reg = <0x100>; + clock-frequency = <1300000000>; + clocks = <&cmu_apollo CLK_SCLK_APOLLO>; + clock-names = "apolloclk"; + operating-points-v2 = <&cluster_a53_opp_table>; + #cooling-cells = <2>; + }; + + cpu1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + reg = <0x101>; + clock-frequency = <1300000000>; + operating-points-v2 = <&cluster_a53_opp_table>; + #cooling-cells = <2>; + }; + + cpu2: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + reg = <0x102>; + clock-frequency = <1300000000>; + operating-points-v2 = <&cluster_a53_opp_table>; + #cooling-cells = <2>; + }; + + cpu3: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + reg = <0x103>; + clock-frequency = <1300000000>; + operating-points-v2 = <&cluster_a53_opp_table>; + #cooling-cells = <2>; + }; + + cpu4: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + enable-method = "psci"; + reg = <0x0>; + clock-frequency = <1900000000>; + clocks = <&cmu_atlas CLK_SCLK_ATLAS>; + clock-names = "atlasclk"; + operating-points-v2 = <&cluster_a57_opp_table>; + #cooling-cells = <2>; + }; + + cpu5: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + enable-method = "psci"; + reg = <0x1>; + clock-frequency = <1900000000>; + operating-points-v2 = <&cluster_a57_opp_table>; + #cooling-cells = <2>; + }; + + cpu6: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + enable-method = "psci"; + reg = <0x2>; + clock-frequency = <1900000000>; + operating-points-v2 = <&cluster_a57_opp_table>; + #cooling-cells = <2>; + }; + + cpu7: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + enable-method = "psci"; + reg = <0x3>; + clock-frequency = <1900000000>; + operating-points-v2 = <&cluster_a57_opp_table>; + #cooling-cells = <2>; + }; + }; + + cluster_a53_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <900000>; + }; + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <925000>; + }; + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <950000>; + }; + opp@700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <975000>; + }; + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1000000>; + }; + opp@900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1050000>; + }; + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1075000>; + }; + opp@1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1112500>; + }; + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1112500>; + }; + opp@1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1150000>; + }; + }; + + cluster_a57_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <900000>; + }; + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <900000>; + }; + opp@700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <912500>; + }; + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <912500>; + }; + opp@900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <937500>; + }; + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <975000>; + }; + opp@1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1012500>; + }; + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1037500>; + }; + opp@1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1062500>; + }; + opp@1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1087500>; + }; + opp@1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1125000>; + }; + opp@1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <1137500>; + }; + opp@1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <1175000>; + }; + opp@1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1212500>; + }; + opp@1900000000 { + opp-hz = /bits/ 64 <1900000000>; + opp-microvolt = <1262500>; + }; + }; + + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_off = <0x84000002>; + cpu_on = <0xC4000003>; + }; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x400>; /* SWRESET */ + mask = <0x1>; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x18000000>; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + xxti: xxti { + compatible = "fixed-clock"; + clock-output-names = "oscclk"; + #clock-cells = <0>; + }; + + cmu_top: clock-controller@10030000 { + compatible = "samsung,exynos5433-cmu-top"; + reg = <0x10030000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_mphy_pll", + "sclk_mfc_pll", + "sclk_bus_pll"; + clocks = <&xxti>, + <&cmu_cpif CLK_SCLK_MPHY_PLL>, + <&cmu_mif CLK_SCLK_MFC_PLL>, + <&cmu_mif CLK_SCLK_BUS_PLL>; + }; + + cmu_cpif: clock-controller@10fc0000 { + compatible = "samsung,exynos5433-cmu-cpif"; + reg = <0x10fc0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk"; + clocks = <&xxti>; + }; + + cmu_mif: clock-controller@105b0000 { + compatible = "samsung,exynos5433-cmu-mif"; + reg = <0x105b0000 0x2000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_mphy_pll"; + clocks = <&xxti>, + <&cmu_cpif CLK_SCLK_MPHY_PLL>; + }; + + cmu_peric: clock-controller@14c80000 { + compatible = "samsung,exynos5433-cmu-peric"; + reg = <0x14c80000 0x1000>; + #clock-cells = <1>; + }; + + cmu_peris: clock-controller@0x10040000 { + compatible = "samsung,exynos5433-cmu-peris"; + reg = <0x10040000 0x1000>; + #clock-cells = <1>; + }; + + cmu_fsys: clock-controller@156e0000 { + compatible = "samsung,exynos5433-cmu-fsys"; + reg = <0x156e0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_ufs_mphy", + "div_aclk_fsys_200", + "sclk_pcie_100_fsys", + "sclk_ufsunipro_fsys", + "sclk_mmc2_fsys", + "sclk_mmc1_fsys", + "sclk_mmc0_fsys", + "sclk_usbhost30_fsys", + "sclk_usbdrd30_fsys"; + clocks = <&xxti>, + <&cmu_cpif CLK_SCLK_UFS_MPHY>, + <&cmu_top CLK_DIV_ACLK_FSYS_200>, + <&cmu_top CLK_SCLK_PCIE_100_FSYS>, + <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>, + <&cmu_top CLK_SCLK_MMC2_FSYS>, + <&cmu_top CLK_SCLK_MMC1_FSYS>, + <&cmu_top CLK_SCLK_MMC0_FSYS>, + <&cmu_top CLK_SCLK_USBHOST30_FSYS>, + <&cmu_top CLK_SCLK_USBDRD30_FSYS>; + }; + + cmu_g2d: clock-controller@12460000 { + compatible = "samsung,exynos5433-cmu-g2d"; + reg = <0x12460000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_g2d_266", + "aclk_g2d_400"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_G2D_266>, + <&cmu_top CLK_ACLK_G2D_400>; + }; + + cmu_disp: clock-controller@13b90000 { + compatible = "samsung,exynos5433-cmu-disp"; + reg = <0x13b90000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_dsim1_disp", + "sclk_dsim0_disp", + "sclk_dsd_disp", + "sclk_decon_tv_eclk_disp", + "sclk_decon_vclk_disp", + "sclk_decon_eclk_disp", + "sclk_decon_tv_vclk_disp", + "aclk_disp_333"; + clocks = <&xxti>, + <&cmu_mif CLK_SCLK_DSIM1_DISP>, + <&cmu_mif CLK_SCLK_DSIM0_DISP>, + <&cmu_mif CLK_SCLK_DSD_DISP>, + <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, + <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>, + <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, + <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, + <&cmu_mif CLK_ACLK_DISP_333>; + }; + + cmu_aud: clock-controller@114c0000 { + compatible = "samsung,exynos5433-cmu-aud"; + reg = <0x114c0000 0x1000>; + #clock-cells = <1>; + }; + + cmu_bus0: clock-controller@13600000 { + compatible = "samsung,exynos5433-cmu-bus0"; + reg = <0x13600000 0x1000>; + #clock-cells = <1>; + + clock-names = "aclk_bus0_400"; + clocks = <&cmu_top CLK_ACLK_BUS0_400>; + }; + + cmu_bus1: clock-controller@14800000 { + compatible = "samsung,exynos5433-cmu-bus1"; + reg = <0x14800000 0x1000>; + #clock-cells = <1>; + + clock-names = "aclk_bus1_400"; + clocks = <&cmu_top CLK_ACLK_BUS1_400>; + }; + + cmu_bus2: clock-controller@13400000 { + compatible = "samsung,exynos5433-cmu-bus2"; + reg = <0x13400000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_bus2_400"; + clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>; + }; + + cmu_g3d: clock-controller@14aa0000 { + compatible = "samsung,exynos5433-cmu-g3d"; + reg = <0x14aa0000 0x2000>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_g3d_400"; + clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; + }; + + cmu_gscl: clock-controller@13cf0000 { + compatible = "samsung,exynos5433-cmu-gscl"; + reg = <0x13cf0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_gscl_111", + "aclk_gscl_333"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_GSCL_111>, + <&cmu_top CLK_ACLK_GSCL_333>; + }; + + cmu_apollo: clock-controller@11900000 { + compatible = "samsung,exynos5433-cmu-apollo"; + reg = <0x11900000 0x2000>; + #clock-cells = <1>; + + clock-names = "oscclk", "sclk_bus_pll_apollo"; + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>; + }; + + cmu_atlas: clock-controller@11800000 { + compatible = "samsung,exynos5433-cmu-atlas"; + reg = <0x11800000 0x2000>; + #clock-cells = <1>; + + clock-names = "oscclk", "sclk_bus_pll_atlas"; + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>; + }; + + cmu_mscl: clock-controller@105d0000 { + compatible = "samsung,exynos5433-cmu-mscl"; + reg = <0x150d0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_jpeg_mscl", + "aclk_mscl_400"; + clocks = <&xxti>, + <&cmu_top CLK_SCLK_JPEG_MSCL>, + <&cmu_top CLK_ACLK_MSCL_400>; + }; + + cmu_mfc: clock-controller@15280000 { + compatible = "samsung,exynos5433-cmu-mfc"; + reg = <0x15280000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_mfc_400"; + clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; + }; + + cmu_hevc: clock-controller@14f80000 { + compatible = "samsung,exynos5433-cmu-hevc"; + reg = <0x14f80000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_hevc_400"; + clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; + }; + + cmu_isp: clock-controller@146d0000 { + compatible = "samsung,exynos5433-cmu-isp"; + reg = <0x146d0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_isp_dis_400", + "aclk_isp_400"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_ISP_DIS_400>, + <&cmu_top CLK_ACLK_ISP_400>; + }; + + cmu_cam0: clock-controller@120d0000 { + compatible = "samsung,exynos5433-cmu-cam0"; + reg = <0x120d0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_cam0_333", + "aclk_cam0_400", + "aclk_cam0_552"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_CAM0_333>, + <&cmu_top CLK_ACLK_CAM0_400>, + <&cmu_top CLK_ACLK_CAM0_552>; + }; + + cmu_cam1: clock-controller@145d0000 { + compatible = "samsung,exynos5433-cmu-cam1"; + reg = <0x145d0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_isp_uart_cam1", + "sclk_isp_spi1_cam1", + "sclk_isp_spi0_cam1", + "aclk_cam1_333", + "aclk_cam1_400", + "aclk_cam1_552"; + clocks = <&xxti>, + <&cmu_top CLK_SCLK_ISP_UART_CAM1>, + <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>, + <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>, + <&cmu_top CLK_ACLK_CAM1_333>, + <&cmu_top CLK_ACLK_CAM1_400>, + <&cmu_top CLK_ACLK_CAM1_552>; + }; + + tmu_atlas0: tmu@10060000 { + compatible = "samsung,exynos5433-tmu"; + reg = <0x10060000 0x200>; + interrupts = <GIC_SPI 95 0>; + clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>, + <&cmu_peris CLK_SCLK_TMU0>; + clock-names = "tmu_apbif", "tmu_sclk"; + #include "exynos5433-tmu-sensor-conf.dtsi" + status = "disabled"; + }; + + tmu_atlas1: tmu@10068000 { + compatible = "samsung,exynos5433-tmu"; + reg = <0x10068000 0x200>; + interrupts = <GIC_SPI 96 0>; + clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>, + <&cmu_peris CLK_SCLK_TMU0>; + clock-names = "tmu_apbif", "tmu_sclk"; + #include "exynos5433-tmu-sensor-conf.dtsi" + status = "disabled"; + }; + + tmu_g3d: tmu@10070000 { + compatible = "samsung,exynos5433-tmu"; + reg = <0x10070000 0x200>; + interrupts = <GIC_SPI 99 0>; + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, + <&cmu_peris CLK_SCLK_TMU1>; + clock-names = "tmu_apbif", "tmu_sclk"; + #include "exynos5433-tmu-g3d-sensor-conf.dtsi" + status = "disabled"; + }; + + tmu_apollo: tmu@10078000 { + compatible = "samsung,exynos5433-tmu"; + reg = <0x10078000 0x200>; + interrupts = <GIC_SPI 115 0>; + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, + <&cmu_peris CLK_SCLK_TMU1>; + clock-names = "tmu_apbif", "tmu_sclk"; + #include "exynos5433-tmu-sensor-conf.dtsi" + status = "disabled"; + }; + + tmu_isp: tmu@1007c000 { + compatible = "samsung,exynos5433-tmu"; + reg = <0x1007c000 0x200>; + interrupts = <GIC_SPI 94 0>; + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, + <&cmu_peris CLK_SCLK_TMU1>; + clock-names = "tmu_apbif", "tmu_sclk"; + #include "exynos5433-tmu-sensor-conf.dtsi" + status = "disabled"; + }; + + mct@101c0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x101c0000 0x800>; + interrupts = <GIC_SPI 102 0>, <GIC_SPI 103 0>, + <GIC_SPI 104 0>, <GIC_SPI 105 0>, + <GIC_SPI 106 0>, <GIC_SPI 107 0>, + <GIC_SPI 108 0>, <GIC_SPI 109 0>, + <GIC_SPI 110 0>, <GIC_SPI 111 0>, + <GIC_SPI 112 0>, <GIC_SPI 113 0>; + clocks = <&xxti>, <&cmu_peris CLK_PCLK_MCT>; + clock-names = "fin_pll", "mct"; + }; + + pinctrl_alive: pinctrl@10580000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x10580000 0x1a20>, <0x11090000 0x100>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos7-wakeup-eint"; + interrupts = <GIC_SPI 16 0>; + }; + }; + + pinctrl_aud: pinctrl@114b0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x114b0000 0x1000>; + interrupts = <GIC_SPI 68 0>; + }; + + pinctrl_cpif: pinctrl@10fe0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x10fe0000 0x1000>; + interrupts = <GIC_SPI 179 0>; + }; + + pinctrl_ese: pinctrl@14ca0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x14ca0000 0x1000>; + interrupts = <GIC_SPI 413 0>; + }; + + pinctrl_finger: pinctrl@14cb0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x14cb0000 0x1000>; + interrupts = <GIC_SPI 414 0>; + }; + + pinctrl_fsys: pinctrl@15690000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x15690000 0x1000>; + interrupts = <GIC_SPI 229 0>; + }; + + pinctrl_imem: pinctrl@11090000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x11090000 0x1000>; + interrupts = <GIC_SPI 325 0>; + }; + + pinctrl_nfc: pinctrl@14cd0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x14cd0000 0x1000>; + interrupts = <GIC_SPI 441 0>; + }; + + pinctrl_peric: pinctrl@14cc0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x14cc0000 0x1100>; + interrupts = <GIC_SPI 440 0>; + }; + + pinctrl_touch: pinctrl@14ce0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x14ce0000 0x1100>; + interrupts = <GIC_SPI 442 0>; + }; + + pmu_system_controller: system-controller@105c0000 { + compatible = "samsung,exynos5433-pmu", "syscon"; + reg = <0x105c0000 0x5008>; + #clock-cells = <1>; + clock-names = "clkout16"; + clocks = <&xxti>; + }; + + gic: interrupt-controller@11001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x11001000 0x1000>, + <0x11002000 0x2000>, + <0x11004000 0x2000>, + <0x11006000 0x2000>; + interrupts = <GIC_PPI 9 0xf04>; + }; + + mipi_phy: video-phy@105c0710 { + compatible = "samsung,exynos5433-mipi-video-phy"; + #phy-cells = <1>; + samsung,pmu-syscon = <&pmu_system_controller>; + samsung,cam0-sysreg = <&syscon_cam0>; + samsung,cam1-sysreg = <&syscon_cam1>; + samsung,disp-sysreg = <&syscon_disp>; + }; + + decon: decon@13800000 { + compatible = "samsung,exynos5433-decon"; + reg = <0x13800000 0x2104>; + clocks = <&cmu_disp CLK_PCLK_DECON>, + <&cmu_disp CLK_ACLK_DECON>, + <&cmu_disp CLK_ACLK_SMMU_DECON0X>, + <&cmu_disp CLK_ACLK_XIU_DECON0X>, + <&cmu_disp CLK_PCLK_SMMU_DECON0X>, + <&cmu_disp CLK_SCLK_DECON_VCLK>, + <&cmu_disp CLK_SCLK_DECON_ECLK>; + clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x", + "aclk_xiu_decon0x", "pclk_smmu_decon0x", + "sclk_decon_vclk", "sclk_decon_eclk"; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <GIC_SPI 201 0>, <GIC_SPI 202 0>, + <GIC_SPI 203 0>; + samsung,disp-sysreg = <&syscon_disp>; + status = "disabled"; + iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>; + iommu-names = "m0", "m1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + decon_to_mic: endpoint { + remote-endpoint = + <&mic_to_decon>; + }; + }; + }; + }; + + dsi: dsi@13900000 { + compatible = "samsung,exynos5433-mipi-dsi"; + reg = <0x13900000 0xC0>; + interrupts = <GIC_SPI 205 0>; + phys = <&mipi_phy 1>; + phy-names = "dsim"; + clocks = <&cmu_disp CLK_PCLK_DSIM0>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>, + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>, + <&cmu_disp CLK_SCLK_DSIM0>; + clock-names = "bus_clk", + "phyclk_mipidphy0_bitclkdiv8", + "phyclk_mipidphy0_rxclkesc0", + "sclk_rgb_vclk_to_dsim0", + "sclk_mipi"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_to_mic: endpoint { + remote-endpoint = <&mic_to_dsi>; + }; + }; + }; + }; + + mic: mic@13930000 { + compatible = "samsung,exynos5433-mic"; + reg = <0x13930000 0x48>; + clocks = <&cmu_disp CLK_PCLK_MIC0>, + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>; + clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0"; + samsung,disp-syscon = <&syscon_disp>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mic_to_decon: endpoint { + remote-endpoint = + <&decon_to_mic>; + }; + }; + + port@1 { + reg = <1>; + mic_to_dsi: endpoint { + remote-endpoint = <&dsi_to_mic>; + }; + }; + }; + }; + + syscon_disp: syscon@13b80000 { + compatible = "syscon"; + reg = <0x13b80000 0x1010>; + }; + + syscon_cam0: syscon@120f0000 { + compatible = "syscon"; + reg = <0x120f0000 0x1020>; + }; + + syscon_cam1: syscon@145f0000 { + compatible = "syscon"; + reg = <0x145f0000 0x1038>; + }; + + sysmmu_decon0x: sysmmu@0x13a00000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13a00000 0x1000>; + interrupts = <GIC_SPI 192 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_disp CLK_PCLK_SMMU_DECON0X>, + <&cmu_disp CLK_ACLK_SMMU_DECON0X>; + #iommu-cells = <0>; + }; + + sysmmu_decon1x: sysmmu@0x13a10000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13a10000 0x1000>; + interrupts = <GIC_SPI 194 0>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_disp CLK_PCLK_SMMU_DECON1X>, + <&cmu_disp CLK_ACLK_SMMU_DECON1X>; + #iommu-cells = <0>; + }; + + serial_0: serial@14c10000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x14c10000 0x100>; + interrupts = <GIC_SPI 421 0>; + clocks = <&cmu_peric CLK_PCLK_UART0>, + <&cmu_peric CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_bus>; + status = "disabled"; + }; + + serial_1: serial@14c20000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x14c20000 0x100>; + interrupts = <GIC_SPI 422 0>; + clocks = <&cmu_peric CLK_PCLK_UART1>, + <&cmu_peric CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_bus>; + status = "disabled"; + }; + + serial_2: serial@14c30000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x14c30000 0x100>; + interrupts = <GIC_SPI 423 0>; + clocks = <&cmu_peric CLK_PCLK_UART2>, + <&cmu_peric CLK_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_bus>; + status = "disabled"; + }; + + spi_0: spi@14d20000 { + compatible = "samsung,exynos5433-spi"; + reg = <0x14d20000 0x100>; + interrupts = <GIC_SPI 432 0>; + dmas = <&pdma0 9>, <&pdma0 8>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peric CLK_PCLK_SPI0>, + <&cmu_peric CLK_SCLK_SPI0>, + <&cmu_peric CLK_SCLK_IOCLK_SPI0>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + num-cs = <1>; + status = "disabled"; + }; + + spi_1: spi@14d30000 { + compatible = "samsung,exynos5433-spi"; + reg = <0x14d30000 0x100>; + interrupts = <GIC_SPI 433 0>; + dmas = <&pdma0 11>, <&pdma0 10>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peric CLK_PCLK_SPI1>, + <&cmu_peric CLK_SCLK_SPI1>, + <&cmu_peric CLK_SCLK_IOCLK_SPI1>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + num-cs = <1>; + status = "disabled"; + }; + + spi_2: spi@14d40000 { + compatible = "samsung,exynos5433-spi"; + reg = <0x14d40000 0x100>; + interrupts = <GIC_SPI 434 0>; + dmas = <&pdma0 13>, <&pdma0 12>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peric CLK_PCLK_SPI2>, + <&cmu_peric CLK_SCLK_SPI2>, + <&cmu_peric CLK_SCLK_IOCLK_SPI2>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_bus>; + num-cs = <1>; + status = "disabled"; + }; + + spi_3: spi@14d50000 { + compatible = "samsung,exynos5433-spi"; + reg = <0x14d50000 0x100>; + interrupts = <GIC_SPI 447 0>; + dmas = <&pdma0 23>, <&pdma0 22>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peric CLK_PCLK_SPI3>, + <&cmu_peric CLK_SCLK_SPI3>, + <&cmu_peric CLK_SCLK_IOCLK_SPI3>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_bus>; + num-cs = <1>; + status = "disabled"; + }; + + spi_4: spi@14d00000 { + compatible = "samsung,exynos5433-spi"; + reg = <0x14d00000 0x100>; + interrupts = <GIC_SPI 412 0>; + dmas = <&pdma0 25>, <&pdma0 24>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peric CLK_PCLK_SPI4>, + <&cmu_peric CLK_SCLK_SPI4>, + <&cmu_peric CLK_SCLK_IOCLK_SPI4>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi4_bus>; + num-cs = <1>; + status = "disabled"; + }; + + adc: adc@14d10000 { + compatible = "samsung,exynos7-adc"; + reg = <0x14d10000 0x100>; + interrupts = <GIC_SPI 438 0>; + clock-names = "adc"; + clocks = <&cmu_peric CLK_PCLK_ADCIF>; + #io-channel-cells = <1>; + io-channel-ranges; + status = "disabled"; + }; + + pwm: pwm@14dd0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x14dd0000 0x100>; + interrupts = <GIC_SPI 416 0>, <GIC_SPI 417 0>, + <GIC_SPI 418 0>, <GIC_SPI 419 0>, + <GIC_SPI 420 0>; + samsung,pwm-outputs = <0>, <1>, <2>, <3>; + clocks = <&cmu_peric CLK_PCLK_PWM>; + clock-names = "timers"; + #pwm-cells = <3>; + status = "disabled"; + }; + + hsi2c_0: hsi2c@14e40000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e40000 0x1000>; + interrupts = <GIC_SPI 428 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c0_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C0>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_1: hsi2c@14e50000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e50000 0x1000>; + interrupts = <GIC_SPI 429 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c1_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C1>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_2: hsi2c@14e60000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e60000 0x1000>; + interrupts = <GIC_SPI 430 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c2_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C2>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_3: hsi2c@14e70000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e70000 0x1000>; + interrupts = <GIC_SPI 431 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c3_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C3>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_4: hsi2c@14ec0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14ec0000 0x1000>; + interrupts = <GIC_SPI 424 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c4_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C4>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_5: hsi2c@14ed0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14ed0000 0x1000>; + interrupts = <GIC_SPI 425 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c5_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C5>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_6: hsi2c@14ee0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14ee0000 0x1000>; + interrupts = <GIC_SPI 426 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c6_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C6>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_7: hsi2c@14ef0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14ef0000 0x1000>; + interrupts = <GIC_SPI 427 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c7_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C7>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_8: hsi2c@14d90000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14d90000 0x1000>; + interrupts = <GIC_SPI 443 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c8_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C8>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_9: hsi2c@14da0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14da0000 0x1000>; + interrupts = <GIC_SPI 444 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c9_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C9>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_10: hsi2c@14de0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14de0000 0x1000>; + interrupts = <GIC_SPI 445 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c10_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C10>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_11: hsi2c@14df0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14df0000 0x1000>; + interrupts = <GIC_SPI 446 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c11_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C11>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + usbdrd30: usb@15400000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, + <&cmu_fsys CLK_SCLK_USBDRD30>; + clock-names = "usbdrd30", "usbdrd30_susp_clk"; + assigned-clocks = + <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>, + <&cmu_top CLK_MOUT_SCLK_USBDRD30>, + <&cmu_top CLK_DIV_SCLK_USBDRD30>; + assigned-clock-parents = + <&cmu_top CLK_SCLK_USBDRD30_FSYS>, + <&cmu_top CLK_MOUT_BUS_PLL_USER>; + assigned-clock-rates = <0>, <0>, <66700000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + dwc3@15400000 { + compatible = "snps,dwc3"; + reg = <0x15400000 0x10000>; + interrupts = <GIC_SPI 231 0>; + phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usbdrd30_phy: phy@15500000 { + compatible = "samsung,exynos5433-usbdrd-phy"; + reg = <0x15500000 0x100>; + clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, <&xxti>, + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>, + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>, + <&cmu_fsys CLK_SCLK_USBDRD30>; + clock-names = "phy", "ref", "phy_utmi", "phy_pipe", + "itp"; + assigned-clocks = + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>, + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>; + assigned-clock-parents = + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>, + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>; + #phy-cells = <1>; + samsung,pmu-syscon = <&pmu_system_controller>; + status = "disabled"; + }; + + usbhost30_phy: phy@15580000 { + compatible = "samsung,exynos5433-usbdrd-phy"; + reg = <0x15580000 0x100>; + clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, <&xxti>, + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>, + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>, + <&cmu_fsys CLK_SCLK_USBHOST30>; + clock-names = "phy", "ref", "phy_utmi", "phy_pipe", + "itp"; + assigned-clocks = + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>, + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>; + assigned-clock-parents = + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>, + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>; + #phy-cells = <1>; + samsung,pmu-syscon = <&pmu_system_controller>; + status = "disabled"; + }; + + usbhost30: usb@15a00000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, + <&cmu_fsys CLK_SCLK_USBHOST30>; + clock-names = "usbdrd30", "usbdrd30_susp_clk"; + assigned-clocks = + <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>, + <&cmu_top CLK_MOUT_SCLK_USBHOST30>, + <&cmu_top CLK_DIV_SCLK_USBHOST30>; + assigned-clock-parents = + <&cmu_top CLK_SCLK_USBHOST30_FSYS>, + <&cmu_top CLK_MOUT_BUS_PLL_USER>; + assigned-clock-rates = <0>, <0>, <66700000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + usbdrd_dwc3_0: dwc3@15a00000 { + compatible = "snps,dwc3"; + reg = <0x15a00000 0x10000>; + interrupts = <GIC_SPI 244 0>; + phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + mshc_0: mshc@15540000 { + compatible = "samsung,exynos7-dw-mshc-smu"; + interrupts = <GIC_SPI 225 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15540000 0x2000>; + clocks = <&cmu_fsys CLK_ACLK_MMC0>, + <&cmu_fsys CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + mshc_1: mshc@15550000 { + compatible = "samsung,exynos7-dw-mshc-smu"; + interrupts = <GIC_SPI 226 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15550000 0x2000>; + clocks = <&cmu_fsys CLK_ACLK_MMC1>, + <&cmu_fsys CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + mshc_2: mshc@15560000 { + compatible = "samsung,exynos7-dw-mshc-smu"; + interrupts = <GIC_SPI 227 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15560000 0x2000>; + clocks = <&cmu_fsys CLK_ACLK_MMC2>, + <&cmu_fsys CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pdma0: pdma@15610000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x15610000 0x1000>; + interrupts = <GIC_SPI 228 0>; + clocks = <&cmu_fsys CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@15600000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x15600000 0x1000>; + interrupts = <GIC_SPI 246 0>; + clocks = <&cmu_fsys CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + }; + + audio-subsystem@11400000 { + compatible = "samsung,exynos5433-lpass"; + reg = <0x11400000 0x100>, <0x11500000 0x08>; + samsung,pmu-syscon = <&pmu_system_controller>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + adma: adma@11420000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11420000 0x1000>; + interrupts = <GIC_SPI 73 0>; + clocks = <&cmu_aud CLK_ACLK_DMAC>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + i2s0: i2s0@11440000 { + compatible = "samsung,exynos7-i2s"; + reg = <0x11440000 0x100>; + dmas = <&adma 0 &adma 2>; + dma-names = "tx", "rx"; + interrupts = <GIC_SPI 70 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_aud CLK_PCLK_AUD_I2S>, + <&cmu_aud CLK_SCLK_AUD_I2S>, + <&cmu_aud CLK_SCLK_I2S_BCLK>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + status = "disabled"; + }; + + serial_3: serial@11460000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x11460000 0x100>; + interrupts = <GIC_SPI 67 0>; + clocks = <&cmu_aud CLK_PCLK_AUD_UART>, + <&cmu_aud CLK_SCLK_AUD_UART>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart_aud_bus>; + status = "disabled"; + }; + }; + }; + + timer: timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; +}; + +#include "exynos5433-pinctrl.dtsi" +#include "exynos5433-tmu.dtsi" diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi index f77ddaf21d04..82321984e1fb 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi @@ -20,8 +20,14 @@ interrupt-controller; interrupt-parent = <&gic>; #interrupt-cells = <2>; - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; }; gpa1: gpa1 { @@ -31,8 +37,14 @@ interrupt-controller; interrupt-parent = <&gic>; #interrupt-cells = <2>; - interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; }; gpa2: gpa2 { diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 6328a66ed97e..4b5a1eadffb5 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -106,7 +106,7 @@ pdma0: pdma@10E10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10E10000 0x1000>; - interrupts = <0 225 0>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_fsys0 ACLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -117,7 +117,7 @@ pdma1: pdma@10EB0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10EB0000 0x1000>; - interrupts = <0 226 0>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_fsys0 ACLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -220,7 +220,7 @@ serial_0: serial@13630000 { compatible = "samsung,exynos4210-uart"; reg = <0x13630000 0x100>; - interrupts = <0 440 0>; + interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peric0 PCLK_UART0>, <&clock_peric0 SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; @@ -230,7 +230,7 @@ serial_1: serial@14c20000 { compatible = "samsung,exynos4210-uart"; reg = <0x14c20000 0x100>; - interrupts = <0 456 0>; + interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peric1 PCLK_UART1>, <&clock_peric1 SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; @@ -240,7 +240,7 @@ serial_2: serial@14c30000 { compatible = "samsung,exynos4210-uart"; reg = <0x14c30000 0x100>; - interrupts = <0 457 0>; + interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peric1 PCLK_UART2>, <&clock_peric1 SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; @@ -250,7 +250,7 @@ serial_3: serial@14c40000 { compatible = "samsung,exynos4210-uart"; reg = <0x14c40000 0x100>; - interrupts = <0 458 0>; + interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peric1 PCLK_UART3>, <&clock_peric1 SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; @@ -264,62 +264,62 @@ wakeup-interrupt-controller { compatible = "samsung,exynos7-wakeup-eint"; interrupt-parent = <&gic>; - interrupts = <0 16 0>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; }; }; pinctrl_bus0: pinctrl@13470000 { compatible = "samsung,exynos7-pinctrl"; reg = <0x13470000 0x1000>; - interrupts = <0 383 0>; + interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_nfc: pinctrl@14cd0000 { compatible = "samsung,exynos7-pinctrl"; reg = <0x14cd0000 0x1000>; - interrupts = <0 473 0>; + interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_touch: pinctrl@14ce0000 { compatible = "samsung,exynos7-pinctrl"; reg = <0x14ce0000 0x1000>; - interrupts = <0 474 0>; + interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_ff: pinctrl@14c90000 { compatible = "samsung,exynos7-pinctrl"; reg = <0x14c90000 0x1000>; - interrupts = <0 475 0>; + interrupts = <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_ese: pinctrl@14ca0000 { compatible = "samsung,exynos7-pinctrl"; reg = <0x14ca0000 0x1000>; - interrupts = <0 476 0>; + interrupts = <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_fsys0: pinctrl@10e60000 { compatible = "samsung,exynos7-pinctrl"; reg = <0x10e60000 0x1000>; - interrupts = <0 221 0>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_fsys1: pinctrl@15690000 { compatible = "samsung,exynos7-pinctrl"; reg = <0x15690000 0x1000>; - interrupts = <0 203 0>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_bus1: pinctrl@14870000 { compatible = "samsung,exynos7-pinctrl"; reg = <0x14870000 0x1000>; - interrupts = <0 384 0>; + interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>; }; hsi2c_0: hsi2c@13640000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x13640000 0x1000>; - interrupts = <0 441 0>; + interrupts = <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -332,7 +332,7 @@ hsi2c_1: hsi2c@13650000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x13650000 0x1000>; - interrupts = <0 442 0>; + interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -345,7 +345,7 @@ hsi2c_2: hsi2c@14e60000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x14e60000 0x1000>; - interrupts = <0 459 0>; + interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -358,7 +358,7 @@ hsi2c_3: hsi2c@14e70000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x14e70000 0x1000>; - interrupts = <0 460 0>; + interrupts = <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -371,7 +371,7 @@ hsi2c_4: hsi2c@13660000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x13660000 0x1000>; - interrupts = <0 443 0>; + interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -384,7 +384,7 @@ hsi2c_5: hsi2c@13670000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x13670000 0x1000>; - interrupts = <0 444 0>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -397,7 +397,7 @@ hsi2c_6: hsi2c@14e00000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x14e00000 0x1000>; - interrupts = <0 461 0>; + interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -410,7 +410,7 @@ hsi2c_7: hsi2c@13e10000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x13e10000 0x1000>; - interrupts = <0 462 0>; + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -423,7 +423,7 @@ hsi2c_8: hsi2c@14e20000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x14e20000 0x1000>; - interrupts = <0 463 0>; + interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -436,7 +436,7 @@ hsi2c_9: hsi2c@13680000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x13680000 0x1000>; - interrupts = <0 445 0>; + interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -449,7 +449,7 @@ hsi2c_10: hsi2c@13690000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x13690000 0x1000>; - interrupts = <0 446 0>; + interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -462,7 +462,7 @@ hsi2c_11: hsi2c@136a0000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x136a0000 0x1000>; - interrupts = <0 447 0>; + interrupts = <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -499,7 +499,8 @@ rtc: rtc@10590000 { compatible = "samsung,s3c6410-rtc"; reg = <0x10590000 0x100>; - interrupts = <0 355 0>, <0 356 0>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_ccore PCLK_RTC>; clock-names = "rtc"; status = "disabled"; @@ -508,7 +509,7 @@ watchdog: watchdog@101d0000 { compatible = "samsung,exynos7-wdt"; reg = <0x101d0000 0x100>; - interrupts = <0 110 0>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peris PCLK_WDT>; clock-names = "watchdog"; samsung,syscon-phandle = <&pmu_system_controller>; @@ -517,7 +518,7 @@ mmc_0: mmc@15740000 { compatible = "samsung,exynos7-dw-mshc-smu"; - interrupts = <0 201 0>; + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x15740000 0x2000>; @@ -530,7 +531,7 @@ mmc_1: mmc@15750000 { compatible = "samsung,exynos7-dw-mshc"; - interrupts = <0 202 0>; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x15750000 0x2000>; @@ -543,7 +544,7 @@ mmc_2: mmc@15560000 { compatible = "samsung,exynos7-dw-mshc-smu"; - interrupts = <0 216 0>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x15560000 0x2000>; @@ -557,7 +558,7 @@ adc: adc@13620000 { compatible = "samsung,exynos7-adc"; reg = <0x13620000 0x100>; - interrupts = <0 448 0>; + interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peric0 PCLK_ADCIF>; clock-names = "adc"; #io-channel-cells = <1>; @@ -577,7 +578,7 @@ tmuctrl_0: tmu@10060000 { compatible = "samsung,exynos7-tmu"; reg = <0x10060000 0x200>; - interrupts = <0 108 0>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peris PCLK_TMU>, <&clock_peris SCLK_TMU>; clock-names = "tmu_apbif", "tmu_sclk"; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 1b7783db7de4..66027181fba4 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -1,5 +1,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts index dd9e91941df4..0989d635b558 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -45,7 +45,7 @@ */ /dts-v1/; -/include/ "fsl-ls1043a.dtsi" +#include "fsl-ls1043a.dtsi" / { model = "LS1043A QDS Board"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts index d2313e05fd22..c37110bc1506 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -45,7 +45,7 @@ */ /dts-v1/; -/include/ "fsl-ls1043a.dtsi" +#include "fsl-ls1043a.dtsi" / { model = "LS1043A RDB Board"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 220ac7057d12..ec13a6ecb754 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -44,6 +44,8 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/thermal/thermal.h> + / { compatible = "fsl,ls1043a"; interrupt-parent = <&gic>; @@ -66,6 +68,7 @@ reg = <0x0>; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -123,6 +126,7 @@ <1 14 0xf08>, /* Physical Non-Secure PPI */ <1 11 0xf08>, /* Virtual PPI */ <1 10 0xf08>; /* Hypervisor PPI */ + fsl,erratum-a008585; }; pmu { @@ -254,6 +258,81 @@ big-endian; }; + tmu: tmu@1f00000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f00000 0x0 0x10000>; + interrupts = <0 33 0x4>; + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; + fsl,tmu-calibration = <0x00000000 0x00000026 + 0x00000001 0x0000002d + 0x00000002 0x00000032 + 0x00000003 0x00000039 + 0x00000004 0x0000003f + 0x00000005 0x00000046 + 0x00000006 0x0000004d + 0x00000007 0x00000054 + 0x00000008 0x0000005a + 0x00000009 0x00000061 + 0x0000000a 0x0000006a + 0x0000000b 0x00000071 + + 0x00010000 0x00000025 + 0x00010001 0x0000002c + 0x00010002 0x00000035 + 0x00010003 0x0000003d + 0x00010004 0x00000045 + 0x00010005 0x0000004e + 0x00010006 0x00000057 + 0x00010007 0x00000061 + 0x00010008 0x0000006b + 0x00010009 0x00000076 + + 0x00020000 0x00000029 + 0x00020001 0x00000033 + 0x00020002 0x0000003d + 0x00020003 0x00000049 + 0x00020004 0x00000056 + 0x00020005 0x00000061 + 0x00020006 0x0000006d + + 0x00030000 0x00000021 + 0x00030001 0x0000002a + 0x00030002 0x0000003c + 0x00030003 0x0000004e>; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&tmu 3>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + dspi0: dspi@2100000 { compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts new file mode 100644 index 000000000000..290e5b014414 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -0,0 +1,212 @@ +/* + * Device Tree Include file for Freescale Layerscape-1046A family SoC. + * + * Copyright 2016, Freescale Semiconductor, Inc. + * + * Shaohui Xie <Shaohui.Xie@nxp.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "fsl-ls1046a.dtsi" + +/ { + model = "LS1046A QDS Board"; + compatible = "fsl,ls1046a-qds", "fsl,ls1046a"; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + serial0 = &duart0; + serial1 = &duart1; + serial2 = &duart2; + serial3 = &duart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&dspi { + bus-num = <0>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a11", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst25wf040b", "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <1>; + spi-max-frequency = <10000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "en25s64", "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <2>; + spi-max-frequency = <10000000>; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + pca9547@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + /* IRQ10_B */ + interrupts = <0 150 0x4>; + }; + + eeprom@56 { + compatible = "atmel,24c512"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "atmel,24c512"; + reg = <0x57>; + }; + + temp-sensor@4c { + compatible = "adi,adt7461a"; + reg = <0x4c>; + }; + }; + }; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NOR, NAND Flashes and FPGA on board */ + ranges = <0x0 0x0 0x0 0x60000000 0x08000000 + 0x1 0x0 0x0 0x7e800000 0x00010000 + 0x2 0x0 0x0 0x7fb00000 0x00000100>; + status = "okay"; + + nor@0,0 { + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + }; + + fpga: board-control@2,0 { + compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis"; + reg = <0x2 0x0 0x0000100>; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&qspi { + num-cs = <2>; + bus-num = <0>; + status = "okay"; + + qflash0: s25fl128s@0 { + compatible = "spansion,m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts new file mode 100644 index 000000000000..d1ccc000d05a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -0,0 +1,150 @@ +/* + * Device Tree Include file for Freescale Layerscape-1046A family SoC. + * + * Copyright 2016, Freescale Semiconductor, Inc. + * + * Mingkai Hu <mingkai.hu@nxp.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "fsl-ls1046a.dtsi" + +/ { + model = "LS1046A RDB Board"; + compatible = "fsl,ls1046a-rdb", "fsl,ls1046a"; + + aliases { + serial0 = &duart0; + serial1 = &duart1; + serial2 = &duart2; + serial3 = &duart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + temp-sensor@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + eeprom@56 { + compatible = "atmel,24c512"; + reg = <0x52>; + }; + + eeprom@57 { + compatible = "atmel,24c512"; + reg = <0x53>; + }; +}; + +&i2c3 { + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NAND Flashe and CPLD on board */ + ranges = <0x0 0x0 0x0 0x7e800000 0x00010000 + 0x2 0x0 0x0 0x7fb00000 0x00000100>; + status = "okay"; + + nand@0,0 { + compatible = "fsl,ifc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x10000>; + }; + + cpld: board-control@2,0 { + compatible = "fsl,ls1046ardb-cpld"; + reg = <0x2 0x0 0x0000100>; + }; +}; + +&qspi { + num-cs = <2>; + bus-num = <0>; + status = "okay"; + + qflash0: s25fs512s@0 { + compatible = "spansion,m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + }; + + qflash1: s25fs512s@1 { + compatible = "spansion,m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi new file mode 100644 index 000000000000..38806ca53829 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -0,0 +1,515 @@ +/* + * Device Tree Include file for Freescale Layerscape-1046A family SoC. + * + * Copyright 2016, Freescale Semiconductor, Inc. + * + * Mingkai Hu <mingkai.hu@nxp.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "fsl,ls1046a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + crypto = &crypto; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0>; + clocks = <&clockgen 1 0>; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x1>; + clocks = <&clockgen 1 0>; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x2>; + clocks = <&clockgen 1 0>; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x3>; + clocks = <&clockgen 1 0>; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + idle-states { + /* + * PSCI node is not added default, U-boot will add missing + * parts if it determines to use PSCI. + */ + entry-method = "arm,psci"; + + CPU_PH20: cpu-ph20 { + compatible = "arm,idle-state"; + idle-state-name = "PH20"; + arm,psci-suspend-param = <0x00010000>; + entry-latency-us = <1000>; + exit-latency-us = <1000>; + min-residency-us = <3000>; + }; + }; + + memory@80000000 { + device_type = "memory"; + }; + + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + + reboot { + compatible ="syscon-reboot"; + regmap = <&dcfg>; + offset = <0xb0>; + mask = <0x02>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xf) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xf) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xf) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xf) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>; + }; + + gic: interrupt-controller@1400000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x1410000 0 0x10000>, /* GICD */ + <0x0 0x1420000 0 0x20000>, /* GICC */ + <0x0 0x1440000 0 0x20000>, /* GICH */ + <0x0 0x1460000 0 0x20000>; /* GICV */ + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ddr: memory-controller@1080000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1080000 0x0 0x1000>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + big-endian; + }; + + ifc: ifc@1530000 { + compatible = "fsl,ifc", "simple-bus"; + reg = <0x0 0x1530000 0x0 0x10000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + }; + + qspi: quadspi@1550000 { + compatible = "fsl,ls1021a-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x1550000 0x0 0x10000>, + <0x0 0x40000000 0x0 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "qspi_en", "qspi"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + fsl,qspi-has-second-chip; + status = "disabled"; + }; + + esdhc: esdhc@1560000 { + compatible = "fsl,esdhc"; + reg = <0x0 0x1560000 0x0 0x10000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + big-endian; + bus-width = <4>; + }; + + scfg: scfg@1570000 { + compatible = "fsl,ls1046a-scfg", "syscon"; + reg = <0x0 0x1570000 0x0 0x10000>; + big-endian; + }; + + crypto: crypto@1700000 { + compatible = "fsl,sec-v5.4", "fsl,sec-v5.0", + "fsl,sec-v4.0"; + fsl,sec-era = <8>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x1700000 0x100000>; + reg = <0x00 0x1700000 0x0 0x100000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + + sec_jr0: jr@10000 { + compatible = "fsl,sec-v5.4-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr@20000 { + compatible = "fsl,sec-v5.4-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x20000 0x10000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr@30000 { + compatible = "fsl,sec-v5.4-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x30000 0x10000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr3: jr@40000 { + compatible = "fsl,sec-v5.4-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x40000 0x10000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + dcfg: dcfg@1ee0000 { + compatible = "fsl,ls1046a-dcfg", "syscon"; + reg = <0x0 0x1ee0000 0x0 0x10000>; + big-endian; + }; + + clockgen: clocking@1ee1000 { + compatible = "fsl,ls1046a-clockgen"; + reg = <0x0 0x1ee1000 0x0 0x1000>; + #clock-cells = <2>; + clocks = <&sysclk>; + }; + + dspi: dspi@2100000 { + compatible = "fsl,ls1021a-v1.0-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dspi"; + clocks = <&clockgen 4 1>; + spi-num-chipselects = <5>; + big-endian; + status = "disabled"; + }; + + i2c0: i2c@2180000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2180000 0x0 0x10000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + dmas = <&edma0 1 39>, + <&edma0 1 38>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c1: i2c@2190000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2190000 0x0 0x10000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + i2c2: i2c@21a0000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x21a0000 0x0 0x10000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + i2c3: i2c@21b0000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x21b0000 0x0 0x10000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + duart0: serial@21c0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x00 0x21c0500 0x0 0x100>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + }; + + duart1: serial@21c0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x00 0x21c0600 0x0 0x100>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + }; + + duart2: serial@21d0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21d0500 0x0 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + }; + + duart3: serial@21d0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21d0600 0x0 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + }; + + gpio0: gpio@2300000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@2310000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2310000 0x0 0x10000>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2320000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2320000 0x0 0x10000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@2330000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2330000 0x0 0x10000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + lpuart0: serial@2950000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2950000 0x0 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 0>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart1: serial@2960000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2960000 0x0 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart2: serial@2970000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2970000 0x0 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart3: serial@2980000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2980000 0x0 0x1000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart4: serial@2990000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2990000 0x0 0x1000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart5: serial@29a0000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x29a0000 0x0 0x1000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + wdog0: watchdog@2ad0000 { + compatible = "fsl,imx21-wdt"; + reg = <0x0 0x2ad0000 0x0 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + big-endian; + }; + + edma0: edma@2c00000 { + #dma-cells = <2>; + compatible = "fsl,vf610-edma"; + reg = <0x0 0x2c00000 0x0 0x10000>, + <0x0 0x2c10000 0x0 0x10000>, + <0x0 0x2c20000 0x0 0x10000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma-tx", "edma-err"; + dma-channels = <32>; + big-endian; + clock-names = "dmamux0", "dmamux1"; + clocks = <&clockgen 4 1>, + <&clockgen 4 1>; + }; + + usb0: usb@2f00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x2f00000 0x0 0x10000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + }; + + usb1: usb@3000000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3000000 0x0 0x10000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + }; + + usb2: usb@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + }; + + sata: sata@3200000 { + compatible = "fsl,ls1046a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts index b0dd010979e7..8bc1f8f6fcfc 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts @@ -46,7 +46,7 @@ /dts-v1/; -/include/ "fsl-ls2080a.dtsi" +#include "fsl-ls2080a.dtsi" / { model = "Freescale Layerscape 2080a QDS Board"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts index ad0ebb8a1949..265e0a8b107b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts @@ -46,7 +46,7 @@ /dts-v1/; -/include/ "fsl-ls2080a.dtsi" +#include "fsl-ls2080a.dtsi" / { model = "Freescale Layerscape 2080a RDB Board"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts index 505d038078a3..290604b0a603 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts @@ -46,7 +46,7 @@ /dts-v1/; -/include/ "fsl-ls2080a.dtsi" +#include "fsl-ls2080a.dtsi" / { model = "Freescale Layerscape 2080a software Simulator model"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index 337da90bd7da..aa5a0fbf2cdf 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -44,6 +44,8 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/thermal/thermal.h> + / { compatible = "fsl,ls2080a"; interrupt-parent = <&gic>; @@ -62,15 +64,16 @@ */ /* We have 4 clusters having 2 Cortex-A57 cores each */ - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x0>; clocks = <&clockgen 1 0>; next-level-cache = <&cluster0_l2>; + #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x1>; @@ -78,15 +81,16 @@ next-level-cache = <&cluster0_l2>; }; - cpu@100 { + cpu2: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x100>; clocks = <&clockgen 1 1>; next-level-cache = <&cluster1_l2>; + #cooling-cells = <2>; }; - cpu@101 { + cpu3: cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x101>; @@ -94,15 +98,16 @@ next-level-cache = <&cluster1_l2>; }; - cpu@200 { + cpu4: cpu@200 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x200>; clocks = <&clockgen 1 2>; next-level-cache = <&cluster2_l2>; + #cooling-cells = <2>; }; - cpu@201 { + cpu5: cpu@201 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x201>; @@ -110,15 +115,16 @@ next-level-cache = <&cluster2_l2>; }; - cpu@300 { + cpu6: cpu@300 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x300>; clocks = <&clockgen 1 3>; next-level-cache = <&cluster3_l2>; + #cooling-cells = <2>; }; - cpu@301 { + cpu7: cpu@301 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x301>; @@ -195,6 +201,7 @@ <1 14 4>, /* Physical Non-Secure PPI, active-low */ <1 11 4>, /* Virtual PPI, active-low */ <1 10 4>; /* Hypervisor PPI, active-low */ + fsl,erratum-a008585; }; pmu { @@ -215,6 +222,100 @@ clocks = <&sysclk>; }; + tmu: tmu@1f80000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f80000 0x0 0x10000>; + interrupts = <0 23 0x4>; + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; + fsl,tmu-calibration = <0x00000000 0x00000026 + 0x00000001 0x0000002d + 0x00000002 0x00000032 + 0x00000003 0x00000039 + 0x00000004 0x0000003f + 0x00000005 0x00000046 + 0x00000006 0x0000004d + 0x00000007 0x00000054 + 0x00000008 0x0000005a + 0x00000009 0x00000061 + 0x0000000a 0x0000006a + 0x0000000b 0x00000071 + + 0x00010000 0x00000025 + 0x00010001 0x0000002c + 0x00010002 0x00000035 + 0x00010003 0x0000003d + 0x00010004 0x00000045 + 0x00010005 0x0000004e + 0x00010006 0x00000057 + 0x00010007 0x00000061 + 0x00010008 0x0000006b + 0x00010009 0x00000076 + + 0x00020000 0x00000029 + 0x00020001 0x00000033 + 0x00020002 0x0000003d + 0x00020003 0x00000049 + 0x00020004 0x00000056 + 0x00020005 0x00000061 + 0x00020006 0x0000006d + + 0x00030000 0x00000021 + 0x00030001 0x0000002a + 0x00030002 0x0000003c + 0x00030003 0x0000004e>; + little-endian; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&tmu 4>; + + trips { + cpu_alert: cpu-alert { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert>; + cooling-device = + <&cpu2 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map2 { + trip = <&cpu_alert>; + cooling-device = + <&cpu4 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map3 { + trip = <&cpu_alert>; + cooling-device = + <&cpu6 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + serial0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0500 0x0 0x100>; diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile index d5f43a06b1c1..c8b8f803cf90 100644 --- a/arch/arm64/boot/dts/hisilicon/Makefile +++ b/arch/arm64/boot/dts/hisilicon/Makefile @@ -1,6 +1,7 @@ dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb +dtb-$(CONFIG_ARCH_HISI) += hip07-d05.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts index f54b28359607..7c4114a67753 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts +++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts @@ -41,18 +41,10 @@ status = "ok"; }; -&sas0 { - status = "ok"; -}; - &sas1 { status = "ok"; }; -&sas2 { - status = "ok"; -}; - &usb_ohci { status = "ok"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi index b548763366dd..a049b64f2101 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi @@ -318,11 +318,17 @@ #size-cells = <2>; ranges; + refclk: refclk { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + #clock-cells = <0>; + }; + usb_ohci: ohci@a7030000 { compatible = "generic-ohci"; reg = <0x0 0xa7030000 0x0 0x10000>; interrupt-parent = <&mbigen_usb>; - interrupts = <64 4>; + interrupts = <640 4>; dma-coherent; status = "disabled"; }; @@ -331,7 +337,7 @@ compatible = "generic-ehci"; reg = <0x0 0xa7020000 0x0 0x10000>; interrupt-parent = <&mbigen_usb>; - interrupts = <65 4>; + interrupts = <641 4>; dma-coherent; status = "disabled"; }; @@ -508,7 +514,7 @@ }; }; - eth0: ethernet@4{ + eth0: ethernet-4{ compatible = "hisilicon,hns-nic-v2"; ae-handle = <&dsaf0>; port-idx-in-ae = <4>; @@ -517,7 +523,7 @@ dma-coherent; }; - eth1: ethernet@5{ + eth1: ethernet-5{ compatible = "hisilicon,hns-nic-v2"; ae-handle = <&dsaf0>; port-idx-in-ae = <5>; @@ -526,7 +532,7 @@ dma-coherent; }; - eth2: ethernet@0{ + eth2: ethernet-0{ compatible = "hisilicon,hns-nic-v2"; ae-handle = <&dsaf0>; port-idx-in-ae = <0>; @@ -535,7 +541,7 @@ dma-coherent; }; - eth3: ethernet@1{ + eth3: ethernet-1{ compatible = "hisilicon,hns-nic-v2"; ae-handle = <&dsaf0>; port-idx-in-ae = <1>; @@ -552,6 +558,7 @@ ctrl-reset-reg = <0xa60>; ctrl-reset-sts-reg = <0x5a30>; ctrl-clock-ena-reg = <0x338>; + clocks = <&refclk 0>; queue-count = <16>; phy-count = <8>; dma-coherent; @@ -590,10 +597,11 @@ reg = <0 0xa2000000 0 0x10000>; sas-addr = [50 01 88 20 16 00 00 00]; hisilicon,sas-syscon = <&pcie_subctl>; - am-max-trans; + hip06-sas-v2-quirk-amt; ctrl-reset-reg = <0xa18>; ctrl-reset-sts-reg = <0x5a0c>; ctrl-clock-ena-reg = <0x318>; + clocks = <&refclk 0>; queue-count = <16>; phy-count = <8>; dma-coherent; @@ -635,6 +643,7 @@ ctrl-reset-reg = <0xae0>; ctrl-reset-sts-reg = <0x5a70>; ctrl-clock-ena-reg = <0x3a8>; + clocks = <&refclk 0>; queue-count = <16>; phy-count = <9>; dma-coherent; diff --git a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts new file mode 100644 index 000000000000..e05844230583 --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts @@ -0,0 +1,66 @@ +/** + * dts file for Hisilicon D05 Development Board + * + * Copyright (C) 2016 Hisilicon Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + */ + +/dts-v1/; + +#include "hip07.dtsi" + +/ { + model = "Hisilicon Hip07 D05 Development Board"; + compatible = "hisilicon,hip07-d05"; + + /* the mem node will be updated by UEFI. */ + memory@0 { + device_type = "memory"; + reg = <0x0 0x00000000 0x0 0x40000000>; + numa-node-id = <0>; + }; + + distance-map { + compatible = "numa-distance-map-v1"; + distance-matrix = <0 0 10>, + <0 1 15>, + <0 2 20>, + <0 3 25>, + <1 0 15>, + <1 1 10>, + <1 2 25>, + <1 3 30>, + <2 0 20>, + <2 1 25>, + <2 2 10>, + <2 3 15>, + <3 0 25>, + <3 1 30>, + <3 2 15>, + <3 3 10>; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "ok"; +}; + +&usb_ohci { + status = "ok"; +}; + +&usb_ehci { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi new file mode 100644 index 000000000000..5144eb1c179d --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi @@ -0,0 +1,1059 @@ +/** + * dts file for Hisilicon D05 Development Board + * + * Copyright (C) 2016 Hisilicon Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "hisilicon,hip07-d05"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + + cluster2 { + core0 { + cpu = <&cpu8>; + }; + core1 { + cpu = <&cpu9>; + }; + core2 { + cpu = <&cpu10>; + }; + core3 { + cpu = <&cpu11>; + }; + }; + + cluster3 { + core0 { + cpu = <&cpu12>; + }; + core1 { + cpu = <&cpu13>; + }; + core2 { + cpu = <&cpu14>; + }; + core3 { + cpu = <&cpu15>; + }; + }; + + cluster4 { + core0 { + cpu = <&cpu16>; + }; + core1 { + cpu = <&cpu17>; + }; + core2 { + cpu = <&cpu18>; + }; + core3 { + cpu = <&cpu19>; + }; + }; + + cluster5 { + core0 { + cpu = <&cpu20>; + }; + core1 { + cpu = <&cpu21>; + }; + core2 { + cpu = <&cpu22>; + }; + core3 { + cpu = <&cpu23>; + }; + }; + + cluster6 { + core0 { + cpu = <&cpu24>; + }; + core1 { + cpu = <&cpu25>; + }; + core2 { + cpu = <&cpu26>; + }; + core3 { + cpu = <&cpu27>; + }; + }; + + cluster7 { + core0 { + cpu = <&cpu28>; + }; + core1 { + cpu = <&cpu29>; + }; + core2 { + cpu = <&cpu30>; + }; + core3 { + cpu = <&cpu31>; + }; + }; + + cluster8 { + core0 { + cpu = <&cpu32>; + }; + core1 { + cpu = <&cpu33>; + }; + core2 { + cpu = <&cpu34>; + }; + core3 { + cpu = <&cpu35>; + }; + }; + + cluster9 { + core0 { + cpu = <&cpu36>; + }; + core1 { + cpu = <&cpu37>; + }; + core2 { + cpu = <&cpu38>; + }; + core3 { + cpu = <&cpu39>; + }; + }; + + cluster10 { + core0 { + cpu = <&cpu40>; + }; + core1 { + cpu = <&cpu41>; + }; + core2 { + cpu = <&cpu42>; + }; + core3 { + cpu = <&cpu43>; + }; + }; + + cluster11 { + core0 { + cpu = <&cpu44>; + }; + core1 { + cpu = <&cpu45>; + }; + core2 { + cpu = <&cpu46>; + }; + core3 { + cpu = <&cpu47>; + }; + }; + + cluster12 { + core0 { + cpu = <&cpu48>; + }; + core1 { + cpu = <&cpu49>; + }; + core2 { + cpu = <&cpu50>; + }; + core3 { + cpu = <&cpu51>; + }; + }; + + cluster13 { + core0 { + cpu = <&cpu52>; + }; + core1 { + cpu = <&cpu53>; + }; + core2 { + cpu = <&cpu54>; + }; + core3 { + cpu = <&cpu55>; + }; + }; + + cluster14 { + core0 { + cpu = <&cpu56>; + }; + core1 { + cpu = <&cpu57>; + }; + core2 { + cpu = <&cpu58>; + }; + core3 { + cpu = <&cpu59>; + }; + }; + + cluster15 { + core0 { + cpu = <&cpu60>; + }; + core1 { + cpu = <&cpu61>; + }; + core2 { + cpu = <&cpu62>; + }; + core3 { + cpu = <&cpu63>; + }; + }; + }; + + cpu0: cpu@10000 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10000>; + enable-method = "psci"; + next-level-cache = <&cluster0_l2>; + numa-node-id = <0>; + }; + + cpu1: cpu@10001 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10001>; + enable-method = "psci"; + next-level-cache = <&cluster0_l2>; + numa-node-id = <0>; + }; + + cpu2: cpu@10002 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10002>; + enable-method = "psci"; + next-level-cache = <&cluster0_l2>; + numa-node-id = <0>; + }; + + cpu3: cpu@10003 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10003>; + enable-method = "psci"; + next-level-cache = <&cluster0_l2>; + numa-node-id = <0>; + }; + + cpu4: cpu@10100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10100>; + enable-method = "psci"; + next-level-cache = <&cluster1_l2>; + numa-node-id = <0>; + }; + + cpu5: cpu@10101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10101>; + enable-method = "psci"; + next-level-cache = <&cluster1_l2>; + numa-node-id = <0>; + }; + + cpu6: cpu@10102 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10102>; + enable-method = "psci"; + next-level-cache = <&cluster1_l2>; + numa-node-id = <0>; + }; + + cpu7: cpu@10103 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10103>; + enable-method = "psci"; + next-level-cache = <&cluster1_l2>; + numa-node-id = <0>; + }; + + cpu8: cpu@10200 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10200>; + enable-method = "psci"; + next-level-cache = <&cluster2_l2>; + numa-node-id = <0>; + }; + + cpu9: cpu@10201 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10201>; + enable-method = "psci"; + next-level-cache = <&cluster2_l2>; + numa-node-id = <0>; + }; + + cpu10: cpu@10202 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10202>; + enable-method = "psci"; + next-level-cache = <&cluster2_l2>; + numa-node-id = <0>; + }; + + cpu11: cpu@10203 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10203>; + enable-method = "psci"; + next-level-cache = <&cluster2_l2>; + numa-node-id = <0>; + }; + + cpu12: cpu@10300 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10300>; + enable-method = "psci"; + next-level-cache = <&cluster3_l2>; + numa-node-id = <0>; + }; + + cpu13: cpu@10301 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10301>; + enable-method = "psci"; + next-level-cache = <&cluster3_l2>; + numa-node-id = <0>; + }; + + cpu14: cpu@10302 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10302>; + enable-method = "psci"; + next-level-cache = <&cluster3_l2>; + numa-node-id = <0>; + }; + + cpu15: cpu@10303 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10303>; + enable-method = "psci"; + next-level-cache = <&cluster3_l2>; + numa-node-id = <0>; + }; + + cpu16: cpu@30000 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30000>; + enable-method = "psci"; + next-level-cache = <&cluster4_l2>; + numa-node-id = <1>; + }; + + cpu17: cpu@30001 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30001>; + enable-method = "psci"; + next-level-cache = <&cluster4_l2>; + numa-node-id = <1>; + }; + + cpu18: cpu@30002 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30002>; + enable-method = "psci"; + next-level-cache = <&cluster4_l2>; + numa-node-id = <1>; + }; + + cpu19: cpu@30003 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30003>; + enable-method = "psci"; + next-level-cache = <&cluster4_l2>; + numa-node-id = <1>; + }; + + cpu20: cpu@30100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30100>; + enable-method = "psci"; + next-level-cache = <&cluster5_l2>; + numa-node-id = <1>; + }; + + cpu21: cpu@30101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30101>; + enable-method = "psci"; + next-level-cache = <&cluster5_l2>; + numa-node-id = <1>; + }; + + cpu22: cpu@30102 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30102>; + enable-method = "psci"; + next-level-cache = <&cluster5_l2>; + numa-node-id = <1>; + }; + + cpu23: cpu@30103 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30103>; + enable-method = "psci"; + next-level-cache = <&cluster5_l2>; + numa-node-id = <1>; + }; + + cpu24: cpu@30200 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30200>; + enable-method = "psci"; + next-level-cache = <&cluster6_l2>; + numa-node-id = <1>; + }; + + cpu25: cpu@30201 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30201>; + enable-method = "psci"; + next-level-cache = <&cluster6_l2>; + numa-node-id = <1>; + }; + + cpu26: cpu@30202 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30202>; + enable-method = "psci"; + next-level-cache = <&cluster6_l2>; + numa-node-id = <1>; + }; + + cpu27: cpu@30203 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30203>; + enable-method = "psci"; + next-level-cache = <&cluster6_l2>; + numa-node-id = <1>; + }; + + cpu28: cpu@30300 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30300>; + enable-method = "psci"; + next-level-cache = <&cluster7_l2>; + numa-node-id = <1>; + }; + + cpu29: cpu@30301 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30301>; + enable-method = "psci"; + next-level-cache = <&cluster7_l2>; + numa-node-id = <1>; + }; + + cpu30: cpu@30302 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30302>; + enable-method = "psci"; + next-level-cache = <&cluster7_l2>; + numa-node-id = <1>; + }; + + cpu31: cpu@30303 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30303>; + enable-method = "psci"; + next-level-cache = <&cluster7_l2>; + numa-node-id = <1>; + }; + + cpu32: cpu@50000 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50000>; + enable-method = "psci"; + next-level-cache = <&cluster8_l2>; + numa-node-id = <2>; + }; + + cpu33: cpu@50001 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50001>; + enable-method = "psci"; + next-level-cache = <&cluster8_l2>; + numa-node-id = <2>; + }; + + cpu34: cpu@50002 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50002>; + enable-method = "psci"; + next-level-cache = <&cluster8_l2>; + numa-node-id = <2>; + }; + + cpu35: cpu@50003 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50003>; + enable-method = "psci"; + next-level-cache = <&cluster8_l2>; + numa-node-id = <2>; + }; + + cpu36: cpu@50100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50100>; + enable-method = "psci"; + next-level-cache = <&cluster9_l2>; + numa-node-id = <2>; + }; + + cpu37: cpu@50101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50101>; + enable-method = "psci"; + next-level-cache = <&cluster9_l2>; + numa-node-id = <2>; + }; + + cpu38: cpu@50102 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50102>; + enable-method = "psci"; + next-level-cache = <&cluster9_l2>; + numa-node-id = <2>; + }; + + cpu39: cpu@50103 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50103>; + enable-method = "psci"; + next-level-cache = <&cluster9_l2>; + numa-node-id = <2>; + }; + + cpu40: cpu@50200 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50200>; + enable-method = "psci"; + next-level-cache = <&cluster10_l2>; + numa-node-id = <2>; + }; + + cpu41: cpu@50201 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50201>; + enable-method = "psci"; + next-level-cache = <&cluster10_l2>; + numa-node-id = <2>; + }; + + cpu42: cpu@50202 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50202>; + enable-method = "psci"; + next-level-cache = <&cluster10_l2>; + numa-node-id = <2>; + }; + + cpu43: cpu@50203 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50203>; + enable-method = "psci"; + next-level-cache = <&cluster10_l2>; + numa-node-id = <2>; + }; + + cpu44: cpu@50300 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50300>; + enable-method = "psci"; + next-level-cache = <&cluster11_l2>; + numa-node-id = <2>; + }; + + cpu45: cpu@50301 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50301>; + enable-method = "psci"; + next-level-cache = <&cluster11_l2>; + numa-node-id = <2>; + }; + + cpu46: cpu@50302 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50302>; + enable-method = "psci"; + next-level-cache = <&cluster11_l2>; + numa-node-id = <2>; + }; + + cpu47: cpu@50303 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50303>; + enable-method = "psci"; + next-level-cache = <&cluster11_l2>; + numa-node-id = <2>; + }; + + cpu48: cpu@70000 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70000>; + enable-method = "psci"; + next-level-cache = <&cluster12_l2>; + numa-node-id = <3>; + }; + + cpu49: cpu@70001 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70001>; + enable-method = "psci"; + next-level-cache = <&cluster12_l2>; + numa-node-id = <3>; + }; + + cpu50: cpu@70002 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70002>; + enable-method = "psci"; + next-level-cache = <&cluster12_l2>; + numa-node-id = <3>; + }; + + cpu51: cpu@70003 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70003>; + enable-method = "psci"; + next-level-cache = <&cluster12_l2>; + numa-node-id = <3>; + }; + + cpu52: cpu@70100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70100>; + enable-method = "psci"; + next-level-cache = <&cluster13_l2>; + numa-node-id = <3>; + }; + + cpu53: cpu@70101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70101>; + enable-method = "psci"; + next-level-cache = <&cluster13_l2>; + numa-node-id = <3>; + }; + + cpu54: cpu@70102 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70102>; + enable-method = "psci"; + next-level-cache = <&cluster13_l2>; + numa-node-id = <3>; + }; + + cpu55: cpu@70103 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70103>; + enable-method = "psci"; + next-level-cache = <&cluster13_l2>; + numa-node-id = <3>; + }; + + cpu56: cpu@70200 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70200>; + enable-method = "psci"; + next-level-cache = <&cluster14_l2>; + numa-node-id = <3>; + }; + + cpu57: cpu@70201 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70201>; + enable-method = "psci"; + next-level-cache = <&cluster14_l2>; + numa-node-id = <3>; + }; + + cpu58: cpu@70202 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70202>; + enable-method = "psci"; + next-level-cache = <&cluster14_l2>; + numa-node-id = <3>; + }; + + cpu59: cpu@70203 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70203>; + enable-method = "psci"; + next-level-cache = <&cluster14_l2>; + numa-node-id = <3>; + }; + + cpu60: cpu@70300 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70300>; + enable-method = "psci"; + next-level-cache = <&cluster15_l2>; + numa-node-id = <3>; + }; + + cpu61: cpu@70301 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70301>; + enable-method = "psci"; + next-level-cache = <&cluster15_l2>; + numa-node-id = <3>; + }; + + cpu62: cpu@70302 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70302>; + enable-method = "psci"; + next-level-cache = <&cluster15_l2>; + numa-node-id = <3>; + }; + + cpu63: cpu@70303 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70303>; + enable-method = "psci"; + next-level-cache = <&cluster15_l2>; + numa-node-id = <3>; + }; + + cluster0_l2: l2-cache0 { + compatible = "cache"; + }; + + cluster1_l2: l2-cache1 { + compatible = "cache"; + }; + + cluster2_l2: l2-cache2 { + compatible = "cache"; + }; + + cluster3_l2: l2-cache3 { + compatible = "cache"; + }; + + cluster4_l2: l2-cache4 { + compatible = "cache"; + }; + + cluster5_l2: l2-cache5 { + compatible = "cache"; + }; + + cluster6_l2: l2-cache6 { + compatible = "cache"; + }; + + cluster7_l2: l2-cache7 { + compatible = "cache"; + }; + + cluster8_l2: l2-cache8 { + compatible = "cache"; + }; + + cluster9_l2: l2-cache9 { + compatible = "cache"; + }; + + cluster10_l2: l2-cache10 { + compatible = "cache"; + }; + + cluster11_l2: l2-cache11 { + compatible = "cache"; + }; + + cluster12_l2: l2-cache12 { + compatible = "cache"; + }; + + cluster13_l2: l2-cache13 { + compatible = "cache"; + }; + + cluster14_l2: l2-cache14 { + compatible = "cache"; + }; + + cluster15_l2: l2-cache15 { + compatible = "cache"; + }; + }; + + gic: interrupt-controller@4d000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + #redistributor-regions = <4>; + redistributor-stride = <0x0 0x40000>; + reg = <0x0 0x4d000000 0x0 0x10000>, /* GICD */ + <0x0 0x4d100000 0x0 0x400000>, /* p0 GICR node 0 */ + <0x0 0x6d100000 0x0 0x400000>, /* p0 GICR node 1 */ + <0x400 0x4d100000 0x0 0x400000>, /* p1 GICR node 2 */ + <0x400 0x6d100000 0x0 0x400000>, /* p1 GICR node 3 */ + <0x0 0xfe000000 0x0 0x10000>, /* GICC */ + <0x0 0xfe010000 0x0 0x10000>, /* GICH */ + <0x0 0xfe020000 0x0 0x10000>; /* GICV */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + p0_its_peri_a: interrupt-controller@4c000000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x0 0x4c000000 0x0 0x40000>; + }; + + p0_its_peri_b: interrupt-controller@6c000000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x0 0x6c000000 0x0 0x40000>; + }; + + p0_its_dsa_a: interrupt-controller@c6000000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x0 0xc6000000 0x0 0x40000>; + }; + + p0_its_dsa_b: interrupt-controller@8,c6000000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x8 0xc6000000 0x0 0x40000>; + }; + + p1_its_peri_a: interrupt-controller@400,4c000000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x400 0x4c000000 0x0 0x40000>; + }; + + p1_its_peri_b: interrupt-controller@400,6c000000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x400 0x6c000000 0x0 0x40000>; + }; + + p1_its_dsa_a: interrupt-controller@400,c6000000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x400 0xc6000000 0x0 0x40000>; + }; + + p1_its_dsa_b: interrupt-controller@408,c6000000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x408 0xc6000000 0x0 0x40000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + p0_mbigen_peri_b: interrupt-controller@60080000 { + compatible = "hisilicon,mbigen-v2"; + reg = <0x0 0x60080000 0x0 0x10000>; + + mbigen_uart: uart_intc { + msi-parent = <&p0_its_peri_b 0x120c7>; + interrupt-controller; + #interrupt-cells = <2>; + num-pins = <1>; + }; + }; + + p0_mbigen_pcie_a: interrupt-controller@a0080000 { + compatible = "hisilicon,mbigen-v2"; + reg = <0x0 0xa0080000 0x0 0x10000>; + + mbigen_usb: intc_usb { + msi-parent = <&p0_its_dsa_a 0x40080>; + interrupt-controller; + #interrupt-cells = <2>; + num-pins = <2>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + uart0: uart@602b0000 { + compatible = "arm,sbsa-uart"; + reg = <0x0 0x602b0000 0x0 0x1000>; + interrupt-parent = <&mbigen_uart>; + interrupts = <807 4>; + current-speed = <115200>; + reg-io-width = <4>; + status = "disabled"; + }; + + usb_ohci: ohci@a7030000 { + compatible = "generic-ohci"; + reg = <0x0 0xa7030000 0x0 0x10000>; + interrupt-parent = <&mbigen_usb>; + interrupts = <640 4>; + dma-coherent; + status = "disabled"; + }; + + usb_ehci: ehci@a7020000 { + compatible = "generic-ehci"; + reg = <0x0 0xa7020000 0x0 0x10000>; + interrupt-parent = <&mbigen_usb>; + interrupts = <641 4>; + dma-coherent; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index cf3953124cef..1690883b931a 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb # Mvebu SoC Family dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 1372e9a6aaa4..a260ae25b658 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -56,7 +56,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x00000000 0x00000000 0x20000000>; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts new file mode 100644 index 000000000000..83178d909fc2 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts @@ -0,0 +1,82 @@ +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board + * Copyright (C) 2016 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "armada-372x.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board"; + compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; +}; + +/* J9 */ +&pcie0 { + status = "okay"; +}; + +/* J6 */ +&sata { + status = "okay"; +}; + +/* Exported on the micro USB connector J5 through an FTDI */ +&uart0 { + status = "okay"; +}; + +/* J7 */ +&usb3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index c4762538ec01..f1596daa2bc7 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -91,7 +91,7 @@ #size-cells = <2>; ranges; - internal-regs { + internal-regs@d0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 7b6136182ad0..a749ba2edec4 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -71,7 +71,7 @@ interrupt-parent = <&gic>; ranges; - config-space { + config-space@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index e5e3ed678b6f..9d7f0cd94f9d 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -52,7 +52,7 @@ interrupt-parent = <&gic>; ranges; - config-space { + config-space@f2000000 { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -131,7 +131,7 @@ #address-cells = <0x1>; #size-cells = <0x0>; cell-index = <1>; - clocks = <&cpm_syscon0 0 3>; + clocks = <&cpm_syscon0 1 21>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index 842fb333285c..88e74069c666 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -52,7 +52,7 @@ interrupt-parent = <&gic>; ranges; - config-space { + config-space@f4000000 { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile index 0f7cdf3e05c1..18941458cb4d 100644 --- a/arch/arm64/boot/dts/nvidia/Makefile +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb +dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb always := $(dtb-y) clean-files := *.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts new file mode 100644 index 000000000000..0d3c0996d832 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -0,0 +1,8 @@ +/dts-v1/; + +#include "tegra186-p3310.dtsi" + +/ { + model = "NVIDIA Tegra186 P2771-0000 Development Board"; + compatible = "nvidia,p2771-0000", "nvidia,tegra186"; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi new file mode 100644 index 000000000000..1abe2eceb3d1 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -0,0 +1,64 @@ +#include "tegra186.dtsi" + +/ { + model = "NVIDIA Tegra186 P3310 Processor Module"; + compatible = "nvidia,p3310", "nvidia,tegra186"; + + aliases { + serial0 = &uarta; + }; + + chosen { + bootargs = "earlycon console=ttyS0,115200n8"; + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x80000000 0x2 0x00000000>; + }; + + serial@3100000 { + status = "okay"; + }; + + hsp@3c00000 { + status = "okay"; + }; + + cpus { + cpu@0 { + enable-method = "psci"; + }; + + cpu@1 { + enable-method = "psci"; + }; + + cpu@2 { + enable-method = "psci"; + }; + + cpu@3 { + enable-method = "psci"; + }; + + cpu@4 { + enable-method = "psci"; + }; + + cpu@5 { + enable-method = "psci"; + }; + }; + + bpmp { + status = "okay"; + }; + + psci { + compatible = "arm,psci-1.0"; + status = "okay"; + method = "smc"; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi new file mode 100644 index 000000000000..a918e10240fd --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -0,0 +1,398 @@ +#include <dt-bindings/gpio/tegra186-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "nvidia,tegra186"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + gpio: gpio@2200000 { + compatible = "nvidia,tegra186-gpio"; + reg-names = "security", "gpio"; + reg = <0x0 0x2200000 0x0 0x10000>, + <0x0 0x2210000 0x0 0x10000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + #gpio-cells = <2>; + gpio-controller; + }; + + uarta: serial@3100000 { + compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x03100000 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 55>; + clock-names = "serial"; + resets = <&bpmp 47>; + reset-names = "serial"; + status = "disabled"; + }; + + uartb: serial@3110000 { + compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x03110000 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 56>; + clock-names = "serial"; + resets = <&bpmp 48>; + reset-names = "serial"; + status = "disabled"; + }; + + uartd: serial@3130000 { + compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x03130000 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 77>; + clock-names = "serial"; + resets = <&bpmp 50>; + reset-names = "serial"; + status = "disabled"; + }; + + uarte: serial@3140000 { + compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x03140000 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 194>; + clock-names = "serial"; + resets = <&bpmp 132>; + reset-names = "serial"; + status = "disabled"; + }; + + uartf: serial@3150000 { + compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x03150000 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 195>; + clock-names = "serial"; + resets = <&bpmp 111>; + reset-names = "serial"; + status = "disabled"; + }; + + gen1_i2c: i2c@3160000 { + compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x03160000 0x0 0x10000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp 47>; + clock-names = "div-clk"; + resets = <&bpmp 19>; + reset-names = "i2c"; + status = "disabled"; + }; + + cam_i2c: i2c@3180000 { + compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x03180000 0x0 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp 75>; + clock-names = "div-clk"; + resets = <&bpmp 21>; + reset-names = "i2c"; + status = "disabled"; + }; + + /* shares pads with dpaux1 */ + dp_aux_ch1_i2c: i2c@3190000 { + compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x03190000 0x0 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp 86>; + clock-names = "div-clk"; + resets = <&bpmp 22>; + reset-names = "i2c"; + status = "disabled"; + }; + + /* controlled by BPMP, should not be enabled */ + pwr_i2c: i2c@31a0000 { + compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x031a0000 0x0 0x10000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp 48>; + clock-names = "div-clk"; + resets = <&bpmp 23>; + reset-names = "i2c"; + status = "disabled"; + }; + + /* shares pads with dpaux0 */ + dp_aux_ch0_i2c: i2c@31b0000 { + compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x031b0000 0x0 0x10000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp 125>; + clock-names = "div-clk"; + resets = <&bpmp 24>; + reset-names = "i2c"; + status = "disabled"; + }; + + gen7_i2c: i2c@31c0000 { + compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x031c0000 0x0 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp 182>; + clock-names = "div-clk"; + resets = <&bpmp 81>; + reset-names = "i2c"; + status = "disabled"; + }; + + gen9_i2c: i2c@31e0000 { + compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x031e0000 0x0 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp 183>; + clock-names = "div-clk"; + resets = <&bpmp 83>; + reset-names = "i2c"; + status = "disabled"; + }; + + sdmmc1: sdhci@3400000 { + compatible = "nvidia,tegra186-sdhci"; + reg = <0x0 0x03400000 0x0 0x10000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 52>; + clock-names = "sdhci"; + resets = <&bpmp 33>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdmmc2: sdhci@3420000 { + compatible = "nvidia,tegra186-sdhci"; + reg = <0x0 0x03420000 0x0 0x10000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 53>; + clock-names = "sdhci"; + resets = <&bpmp 34>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdmmc3: sdhci@3440000 { + compatible = "nvidia,tegra186-sdhci"; + reg = <0x0 0x03440000 0x0 0x10000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 76>; + clock-names = "sdhci"; + resets = <&bpmp 35>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdmmc4: sdhci@3460000 { + compatible = "nvidia,tegra186-sdhci"; + reg = <0x0 0x03460000 0x0 0x10000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 54>; + clock-names = "sdhci"; + resets = <&bpmp 36>; + reset-names = "sdhci"; + status = "disabled"; + }; + + gic: interrupt-controller@3881000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x03881000 0x0 0x1000>, + <0x0 0x03882000 0x0 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-parent = <&gic>; + }; + + hsp_top0: hsp@3c00000 { + compatible = "nvidia,tegra186-hsp"; + reg = <0x0 0x03c00000 0x0 0xa0000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "doorbell"; + #mbox-cells = <2>; + status = "disabled"; + }; + + gen2_i2c: i2c@c240000 { + compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x0c240000 0x0 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp 218>; + clock-names = "div-clk"; + resets = <&bpmp 20>; + reset-names = "i2c"; + status = "disabled"; + }; + + gen8_i2c: i2c@c250000 { + compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x0c250000 0x0 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp 219>; + clock-names = "div-clk"; + resets = <&bpmp 82>; + reset-names = "i2c"; + status = "disabled"; + }; + + uartc: serial@c280000 { + compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x0c280000 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 215>; + clock-names = "serial"; + resets = <&bpmp 49>; + reset-names = "serial"; + status = "disabled"; + }; + + uartg: serial@c290000 { + compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x0c290000 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 216>; + clock-names = "serial"; + resets = <&bpmp 112>; + reset-names = "serial"; + status = "disabled"; + }; + + gpio_aon: gpio@c2f0000 { + compatible = "nvidia,tegra186-gpio-aon"; + reg-names = "security", "gpio"; + reg = <0x0 0xc2f0000 0x0 0x1000>, + <0x0 0xc2f1000 0x0 0x1000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sysram@30000000 { + compatible = "nvidia,tegra186-sysram", "mmio-sram"; + reg = <0x0 0x30000000 0x0 0x50000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>; + + cpu_bpmp_tx: shmem@4e000 { + compatible = "nvidia,tegra186-bpmp-shmem"; + reg = <0x0 0x4e000 0x0 0x1000>; + label = "cpu-bpmp-tx"; + pool; + }; + + cpu_bpmp_rx: shmem@4f000 { + compatible = "nvidia,tegra186-bpmp-shmem"; + reg = <0x0 0x4f000 0x0 0x1000>; + label = "cpu-bpmp-rx"; + pool; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "nvidia,tegra186-denver", "arm,armv8"; + device_type = "cpu"; + reg = <0x000>; + }; + + cpu@1 { + compatible = "nvidia,tegra186-denver", "arm,armv8"; + device_type = "cpu"; + reg = <0x001>; + }; + + cpu@2 { + compatible = "arm,cortex-a57", "arm,armv8"; + device_type = "cpu"; + reg = <0x100>; + }; + + cpu@3 { + compatible = "arm,cortex-a57", "arm,armv8"; + device_type = "cpu"; + reg = <0x101>; + }; + + cpu@4 { + compatible = "arm,cortex-a57", "arm,armv8"; + device_type = "cpu"; + reg = <0x102>; + }; + + cpu@5 { + compatible = "arm,cortex-a57", "arm,armv8"; + device_type = "cpu"; + reg = <0x103>; + }; + }; + + bpmp: bpmp { + compatible = "nvidia,tegra186-bpmp"; + mboxes = <&hsp_top0 0 19>; + shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>; + #clock-cells = <1>; + #reset-cells = <1>; + + bpmp_i2c: i2c { + compatible = "nvidia,tegra186-bpmp-i2c"; + nvidia,bpmp-bus-id = <5>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 5dd05de5619b..cc0f02d9dd02 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -1,6 +1,9 @@ -dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb msm8916-mtp.dtb -dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index bb062b547110..08bd5ebafb4e 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -15,6 +15,7 @@ #include "pm8916.dtsi" #include "apq8016-sbc-soc-pins.dtsi" #include "apq8016-sbc-pmic-pins.dtsi" +#include <dt-bindings/sound/apq8016-lpass.h> / { aliases { @@ -251,6 +252,60 @@ vddio-supply = <&pm8916_l6>; }; }; + + lpass_codec: codec{ + status = "okay"; + }; + + /* + Internal Codec + playback - Primary MI2S + capture - Ter MI2S + + External Primary: + playback - secondary MI2S + capture - Quat MI2S + + External Secondary: + playback - Quat MI2S + capture - Quat MI2S + + */ + + sound: sound { + compatible = "qcom,apq8016-sbc-sndcard"; + reg = <0x07702000 0x4>, <0x07702004 0x4>; + reg-names = "mic-iomux", "spkr-iomux"; + + status = "okay"; + pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; + pinctrl-names = "default", "sleep"; + qcom,model = "DB410c"; + qcom,audio-routing = + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + internal-codec-playback-dai-link@0 { /* I2S - Internal codec */ + link-name = "WCD"; + cpu { /* PRIMARY */ + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + internal-codec-capture-dai-link@0 { /* I2S - Internal codec */ + link-name = "WCD-Capture"; + cpu { /* PRIMARY */ + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; + }; }; usb2513 { @@ -278,6 +333,12 @@ }; }; +&wcd_codec { + status = "okay"; + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l5-supply = <&pm8916_s3>; @@ -308,8 +369,8 @@ }; l2 { - regulator-min-microvolt = <375000>; - regulator-max-microvolt = <1525000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; }; l3 { @@ -328,8 +389,8 @@ }; l6 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; l7 { @@ -388,8 +449,8 @@ }; l17 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; l18 { diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi new file mode 100644 index 000000000000..0de95171d6d0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi @@ -0,0 +1,15 @@ + +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +&pm8994_gpios { + + pinctrl-names = "default"; + pinctrl-0 = <&ls_exp_gpio_f>; + + ls_exp_gpio_f: pm8916_mpp4 { + pinconf { + pins = "gpio5"; + output-low; + power-source = <2>; // PM8994_GPIO_S4, 1.8V + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index afb218cffc60..422959b87d12 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -12,7 +12,9 @@ */ #include "msm8996.dtsi" +#include "pm8994.dtsi" #include "apq8096-db820c-pins.dtsi" +#include "apq8096-db820c-pmic-pins.dtsi" / { aliases { diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 466ca5705c99..4221b7d2c0ce 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -77,7 +77,7 @@ no-map; }; - mpss@86800000 { + mpss_mem: mpss@86800000 { reg = <0x0 0x86800000 0x0 0x2b00000>; no-map; }; @@ -504,6 +504,15 @@ reg-names = "lpass-lpaif"; }; + lpass_codec: codec{ + compatible = "qcom,msm8916-wcd-digital-codec"; + reg = <0x0771c000 0x400>; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "ahbix-clk", "mclk"; + #sound-dai-cells = <1>; + }; + sdhc_1: sdhci@07824000 { compatible = "qcom,sdhci-msm-v4"; reg = <0x07824900 0x11c>, <0x07824000 0x800>; @@ -801,6 +810,49 @@ clock-names = "iface_clk"; }; }; + + + hexagon@4080000 { + compatible = "qcom,q6v5-pil"; + reg = <0x04080000 0x100>, + <0x04020000 0x040>; + + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc 0 24 1>, + <&hexagon_smp2p_in 0 0>, + <&hexagon_smp2p_in 1 0>, + <&hexagon_smp2p_in 2 0>, + <&hexagon_smp2p_in 3 0>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>; + clock-names = "iface", "bus", "mem"; + + qcom,smem-states = <&hexagon_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&scm 0>; + reset-names = "mss_restart"; + + mx-supply = <&pm8916_l3>; + pll-supply = <&pm8916_l7>; + + qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; + + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + }; }; smd { @@ -848,6 +900,14 @@ }; }; }; + + hexagon { + interrupts = <0 25 IRQ_TYPE_EDGE_RISING>; + + qcom,smd-edge = <0>; + qcom,ipc = <&apcs 8 12>; + qcom,remote-pid = <1>; + }; }; hexagon-smp2p { diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts new file mode 100644 index 000000000000..454213391671 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts @@ -0,0 +1,41 @@ +/* Copyright (c) 2015, LGE Inc. All rights reserved. + * Copyright (c) 2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include "msm8992.dtsi" + +/ { + model = "LG Nexus 5X"; + compatible = "lg,bullhead", "qcom,msm8992"; + /* required for bootloader to select correct board */ + qcom,board-id = <0xb64 0>; + qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + serial@f991e000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi new file mode 100644 index 000000000000..d2a26f0f8d73 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi @@ -0,0 +1,38 @@ +/* + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +&msmgpio { + blsp1_uart2_default: blsp1_uart2_default { + pinmux { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + }; + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <16>; + bias-disable; + }; + }; + + blsp1_uart2_sleep: blsp1_uart2_sleep { + pinmux { + function = "gpio"; + pins = "gpio4", "gpio5"; + }; + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-pull-down; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi new file mode 100644 index 000000000000..44b2d37d8c4b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -0,0 +1,184 @@ +/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-msm8994.h> + +/ { + model = "Qualcomm Technologies, Inc. MSM 8992"; + compatible = "qcom,msm8992"; + // msm-id needed by bootloader for selecting correct blob + qcom,msm-id = <251 0>, <252 0>; + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + }; + }; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + intc: interrupt-controller@f9000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xf9000000 0x1000>, + <0xf9002000 0x1000>; + }; + + timer@f9020000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0xf9020000 0x1000>; + + frame@f9021000 { + frame-number = <0>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9021000 0x1000>, + <0xf9022000 0x1000>; + }; + + frame@f9023000 { + frame-number = <1>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9023000 0x1000>; + status = "disabled"; + }; + + frame@f9024000 { + frame-number = <2>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9024000 0x1000>; + status = "disabled"; + }; + + frame@f9025000 { + frame-number = <3>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9025000 0x1000>; + status = "disabled"; + }; + + frame@f9026000 { + frame-number = <4>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9026000 0x1000>; + status = "disabled"; + }; + + frame@f9027000 { + frame-number = <5>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9027000 0x1000>; + status = "disabled"; + }; + + frame@f9028000 { + frame-number = <6>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9028000 0x1000>; + status = "disabled"; + }; + }; + + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; + + msmgpio: pinctrl@fd510000 { + compatible = "qcom,msm8994-pinctrl"; + reg = <0xfd510000 0x4000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + blsp1_uart2: serial@f991e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991e000 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>; + status = "disabled"; + clock-names = "core", "iface"; + clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>, + <&clock_gcc GCC_BLSP1_AHB_CLK>; + }; + + clock_gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-msm8994"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfc400000 0x2000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0 0>; // bootloader will update + }; +}; + + +#include "msm8992-pins.dtsi" diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts new file mode 100644 index 000000000000..dfa08f513dc4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts @@ -0,0 +1,40 @@ +/* Copyright (c) 2015, Huawei Inc. All rights reserved. + * Copyright (c) 2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include "msm8994.dtsi" + +/ { + model = "Huawei Nexus 6P"; + compatible = "huawei,angler", "qcom,msm8994"; + /* required for bootloader to select correct board */ + qcom,board-id = <8026 0>; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + serial@f991e000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi new file mode 100644 index 000000000000..0e4eea0df25d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi @@ -0,0 +1,38 @@ +/* + * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +&msmgpio { + blsp1_uart2_default: blsp1_uart2_default { + pinmux { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + }; + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <16>; + bias-disable; + }; + }; + + blsp1_uart2_sleep: blsp1_uart2_sleep { + pinmux { + function = "gpio"; + pins = "gpio4", "gpio5"; + }; + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-pull-down; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi new file mode 100644 index 000000000000..f33c41d01c86 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -0,0 +1,216 @@ +/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-msm8994.h> + +/ { + model = "Qualcomm Technologies, Inc. MSM 8994"; + compatible = "qcom,msm8994"; + // msm-id and pmic-id are required by bootloader for + // proper selection of dt blob + qcom,msm-id = <207 0x20000>; + qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + }; + }; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 2 0xff08>, + <1 3 0xff08>, + <1 4 0xff08>, + <1 1 0xff08>; + }; + + soc: soc { + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + intc: interrupt-controller@f9000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xf9000000 0x1000>, + <0xf9002000 0x1000>; + }; + + timer@f9020000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0xf9020000 0x1000>; + + frame@f9021000 { + frame-number = <0>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9021000 0x1000>, + <0xf9022000 0x1000>; + }; + + frame@f9023000 { + frame-number = <1>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9023000 0x1000>; + status = "disabled"; + }; + + frame@f9024000 { + frame-number = <2>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9024000 0x1000>; + status = "disabled"; + }; + + frame@f9025000 { + frame-number = <3>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9025000 0x1000>; + status = "disabled"; + }; + + frame@f9026000 { + frame-number = <4>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9026000 0x1000>; + status = "disabled"; + }; + + frame@f9027000 { + frame-number = <5>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9027000 0x1000>; + status = "disabled"; + }; + + frame@f9028000 { + frame-number = <6>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9028000 0x1000>; + status = "disabled"; + }; + }; + + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; + + msmgpio: pinctrl@fd510000 { + compatible = "qcom,msm8994-pinctrl"; + reg = <0xfd510000 0x4000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + blsp1_uart2: serial@f991e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991e000 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clock-names = "core", "iface"; + clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>, + <&clock_gcc GCC_BLSP1_AHB_CLK>; + }; + + tcsr_mutex_regs: syscon@fd484000 { + compatible = "syscon"; + reg = <0xfd484000 0x2000>; + }; + + clock_gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-msm8994"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfc400000 0x2000>; + }; + }; + + memory { + device_type = "memory"; + // We expect the bootloader to fill in the reg + reg = <0 0 0 0>; + }; + + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + smem_mem: smem_region@6a00000 { + reg = <0x0 0x6a00000 0x0 0x200000>; + no-map; + }; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x80>; + #hwlock-cells = <1>; + }; + + qcom,smem@6a00000 { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; +}; + + +#include "msm8994-pins.dtsi" diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 338f82a7fdc7..cde4114bae5a 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -30,6 +30,42 @@ reg = <0 0 0 0>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mba_region: mba@91500000 { + reg = <0x0 0x91500000 0x0 0x200000>; + no-map; + }; + + slpi_region: slpi@90b00000 { + reg = <0x0 0x90b00000 0x0 0xa00000>; + no-map; + }; + + venus_region: venus@90400000 { + reg = <0x0 0x90400000 0x0 0x700000>; + no-map; + }; + + adsp_region: adsp@8ea00000 { + reg = <0x0 0x8ea00000 0x0 0x1a00000>; + no-map; + }; + + mpss_region: mpss@88800000 { + reg = <0x0 0x88800000 0x0 0x6200000>; + no-map; + }; + + smem_mem: smem-mem@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; + }; + }; + cpus { #address-cells = <2>; #size-cells = <0>; @@ -212,12 +248,29 @@ method = "smc"; }; + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x1000>; + #hwlock-cells = <1>; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; + tcsr_mutex_regs: syscon@740000 { + compatible = "syscon"; + reg = <0x740000 0x20000>; + }; + intc: interrupt-controller@9bc0000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; @@ -229,6 +282,11 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + apcs: syscon@9820000 { + compatible = "syscon"; + reg = <0x9820000 0x1000>; + }; + gcc: clock-controller@300000 { compatible = "qcom,gcc-msm8996"; #clock-cells = <1>; @@ -458,5 +516,29 @@ <825000000>; }; }; + + adsp-smp2p { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <0 158 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 16 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; }; #include "msm8996-pins.dtsi" diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index f71679b15d54..53deebf9f515 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -91,9 +91,52 @@ }; pm8916_1: pm8916@1 { - compatible = "qcom,spmi-pmic"; + compatible = "qcom,pm8916", "qcom,spmi-pmic"; reg = <0x1 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + wcd_codec: codec@f000 { + compatible = "qcom,pm8916-wcd-analog-codec"; + reg = <0xf000 0x200>; + reg-names = "pmic-codec-core"; + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; + interrupt-parent = <&spmi_bus>; + interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, + <0x1 0xf0 0x1 IRQ_TYPE_NONE>, + <0x1 0xf0 0x2 IRQ_TYPE_NONE>, + <0x1 0xf0 0x3 IRQ_TYPE_NONE>, + <0x1 0xf0 0x4 IRQ_TYPE_NONE>, + <0x1 0xf0 0x5 IRQ_TYPE_NONE>, + <0x1 0xf0 0x6 IRQ_TYPE_NONE>, + <0x1 0xf0 0x7 IRQ_TYPE_NONE>, + <0x1 0xf1 0x0 IRQ_TYPE_NONE>, + <0x1 0xf1 0x1 IRQ_TYPE_NONE>, + <0x1 0xf1 0x2 IRQ_TYPE_NONE>, + <0x1 0xf1 0x3 IRQ_TYPE_NONE>, + <0x1 0xf1 0x4 IRQ_TYPE_NONE>, + <0x1 0xf1 0x5 IRQ_TYPE_NONE>; + interrupt-names = "cdc_spk_cnp_int", + "cdc_spk_clip_int", + "cdc_spk_ocp_int", + "mbhc_ins_rem_det1", + "mbhc_but_rel_det", + "mbhc_but_press_det", + "mbhc_ins_rem_det", + "mbhc_switch_int", + "cdc_ear_ocp_int", + "cdc_hphr_ocp_int", + "cdc_hphl_ocp_det", + "cdc_ear_cnp_int", + "cdc_hphr_cnp_int", + "cdc_hphl_cnp_int"; + vdd-cdc-io-supply = <&pm8916_l5>; + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; + vdd-micbias-supply = <&pm8916_l13>; + #sound-dai-cells = <1>; + + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index 1222d2e904f6..0f1866024ae3 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -29,6 +29,7 @@ <0 0xcc 0 IRQ_TYPE_NONE>, <0 0xcd 0 IRQ_TYPE_NONE>, <0 0xce 0 IRQ_TYPE_NONE>, + <0 0xcf 0 IRQ_TYPE_NONE>, <0 0xd0 0 IRQ_TYPE_NONE>, <0 0xd1 0 IRQ_TYPE_NONE>, <0 0xd2 0 IRQ_TYPE_NONE>, diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index eb72830ec9eb..1618e0a3c81d 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -1,5 +1,5 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb -dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb +dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb always := $(dtb-y) clean-files := *.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts index bcb11a868343..6ffb0517421a 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for the H3ULCB board + * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. @@ -62,6 +62,24 @@ clock-frequency = <24576000>; }; + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; @@ -145,18 +163,30 @@ function = "avb"; }; - sdhi0_pins_3v3: sd0_3v3 { + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; power-source = <3300>; }; - sdhi0_pins_1v8: sd0_1v8 { + sdhi0_pins_uhs: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; power-source = <1800>; }; + sdhi2_pins: sd2 { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; + sound_pins: sound { groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; function = "ssi"; @@ -261,8 +291,8 @@ }; &sdhi0 { - pinctrl-0 = <&sdhi0_pins_3v3>; - pinctrl-1 = <&sdhi0_pins_1v8>; + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi0>; @@ -273,6 +303,19 @@ status = "okay"; }; +&sdhi2 { + /* used for on-board 8bit eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + &ssi1 { shared-pin; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index b1eab6876f8c..bcaf4008d32d 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -62,6 +62,24 @@ clock-frequency = <24576000>; }; + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; @@ -191,6 +209,10 @@ remote-endpoint = <&adv7123_in>; }; }; + port@3 { + lvds_connector: endpoint { + }; + }; }; }; @@ -237,11 +259,37 @@ sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; }; sdhi3_pins: sd3 { groups = "sdhi3_data4", "sdhi3_ctrl"; function = "sdhi3"; + power-source = <3300>; + }; + + sdhi3_pins_uhs: sd3_uhs { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <1800>; }; sound_pins: sound { @@ -261,8 +309,20 @@ }; usb1_pins: usb1 { - groups = "usb1"; - function = "usb1"; + mux { + groups = "usb1"; + function = "usb1"; + }; + + ovc { + pins = "GP_6_27"; + bias-pull-up; + }; + + pwen { + pins = "GP_6_26"; + bias-pull-down; + }; }; usb2_pins: usb2 { @@ -371,25 +431,42 @@ &sdhi0 { pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi0>; vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; bus-width = <4>; + sd-uhs-sdr50; + status = "okay"; +}; + +&sdhi2 { + /* used for on-board 8bit eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + non-removable; status = "okay"; }; &sdhi3 { pinctrl-0 = <&sdhi3_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi3_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi3>; vqmmc-supply = <&vccq_sdhi3>; cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; bus-width = <4>; + sd-uhs-sdr50; status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 8c15040f2540..a39a702b904d 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -321,6 +321,11 @@ #power-domain-cells = <0>; }; + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,r8a7795-sysc"; reg = <0 0xe6180000 0 0x0400>; @@ -1306,28 +1311,28 @@ }; fcpvb1: fcp@fe92f000 { - compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + compatible = "renesas,fcpv"; reg = <0 0xfe92f000 0 0x200>; clocks = <&cpg CPG_MOD 606>; power-domains = <&sysc R8A7795_PD_A3VP>; }; fcpf0: fcp@fe950000 { - compatible = "renesas,r8a7795-fcpf", "renesas,fcpf"; + compatible = "renesas,fcpf"; reg = <0 0xfe950000 0 0x200>; clocks = <&cpg CPG_MOD 615>; power-domains = <&sysc R8A7795_PD_A3VP>; }; fcpf1: fcp@fe951000 { - compatible = "renesas,r8a7795-fcpf", "renesas,fcpf"; + compatible = "renesas,fcpf"; reg = <0 0xfe951000 0 0x200>; clocks = <&cpg CPG_MOD 614>; power-domains = <&sysc R8A7795_PD_A3VP>; }; fcpf2: fcp@fe952000 { - compatible = "renesas,r8a7795-fcpf", "renesas,fcpf"; + compatible = "renesas,fcpf"; reg = <0 0xfe952000 0 0x200>; clocks = <&cpg CPG_MOD 613>; power-domains = <&sysc R8A7795_PD_A3VP>; @@ -1344,7 +1349,7 @@ }; fcpvb0: fcp@fe96f000 { - compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + compatible = "renesas,fcpv"; reg = <0 0xfe96f000 0 0x200>; clocks = <&cpg CPG_MOD 607>; power-domains = <&sysc R8A7795_PD_A3VP>; @@ -1361,7 +1366,7 @@ }; fcpvi0: fcp@fe9af000 { - compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + compatible = "renesas,fcpv"; reg = <0 0xfe9af000 0 0x200>; clocks = <&cpg CPG_MOD 611>; power-domains = <&sysc R8A7795_PD_A3VP>; @@ -1378,7 +1383,7 @@ }; fcpvi1: fcp@fe9bf000 { - compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + compatible = "renesas,fcpv"; reg = <0 0xfe9bf000 0 0x200>; clocks = <&cpg CPG_MOD 610>; power-domains = <&sysc R8A7795_PD_A3VP>; @@ -1395,7 +1400,7 @@ }; fcpvi2: fcp@fe9cf000 { - compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + compatible = "renesas,fcpv"; reg = <0 0xfe9cf000 0 0x200>; clocks = <&cpg CPG_MOD 609>; power-domains = <&sysc R8A7795_PD_A3VP>; @@ -1412,7 +1417,7 @@ }; fcpvd0: fcp@fea27000 { - compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + compatible = "renesas,fcpv"; reg = <0 0xfea27000 0 0x200>; clocks = <&cpg CPG_MOD 603>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -1429,7 +1434,7 @@ }; fcpvd1: fcp@fea2f000 { - compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + compatible = "renesas,fcpv"; reg = <0 0xfea2f000 0 0x200>; clocks = <&cpg CPG_MOD 602>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -1446,7 +1451,7 @@ }; fcpvd2: fcp@fea37000 { - compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + compatible = "renesas,fcpv"; reg = <0 0xfea37000 0 0x200>; clocks = <&cpg CPG_MOD 601>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -1463,7 +1468,7 @@ }; fcpvd3: fcp@fea3f000 { - compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + compatible = "renesas,fcpv"; reg = <0 0xfea3f000 0 0x200>; clocks = <&cpg CPG_MOD 600>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts new file mode 100644 index 000000000000..c3f064ac2cb4 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts @@ -0,0 +1,189 @@ +/* + * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board + * + * Copyright (C) 2016 Renesas Electronics Corp. + * Copyright (C) 2016 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7796.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Renesas M3ULCB board based on r8a7796"; + compatible = "renesas,m3ulcb", "renesas,r8a7796"; + + aliases { + serial0 = &scif2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + leds { + compatible = "gpio-leds"; + + led5 { + gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + }; + led6 { + gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; + }; + }; + + keyboard { + compatible = "gpio-keys"; + + key-1 { + linux,code = <KEY_1>; + label = "SW3"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + }; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_a"; + function = "scif_clk"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + sd-uhs-sdr50; + status = "okay"; +}; + +&sdhi2 { + /* used for on-board 8bit eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + +&wdt0 { + timeout-sec = <60>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index 13db7d61c26c..f35e96ca7d60 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "r8a7796.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Renesas Salvator-X board based on r8a7796"; @@ -29,6 +30,72 @@ /* first 128MB is reserved for secure area. */ reg = <0x0 0x48000000 0x0 0x78000000>; }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vcc_sdhi3: regulator-vcc-sdhi3 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI3 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi3: regulator-vccq-sdhi3 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI3 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; }; &pfc { @@ -43,12 +110,98 @@ groups = "scif_clk_a"; function = "scif_clk"; }; + + i2c2_pins: i2c2 { + groups = "i2c2_a"; + function = "i2c2"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; + + sdhi3_pins: sd3 { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <3300>; + }; + + sdhi3_pins_uhs: sd3_uhs { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <1800>; + }; }; &extal_clk { clock-frequency = <16666666>; }; +&extalr_clk { + clock-frequency = <32768>; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + sd-uhs-sdr50; + status = "okay"; +}; + +&sdhi2 { + /* used for on-board 8bit eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&sdhi3 { + pinctrl-0 = <&sdhi3_pins>; + pinctrl-1 = <&sdhi3_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi3>; + vqmmc-supply = <&vccq_sdhi3>; + cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + sd-uhs-sdr50; + status = "okay"; +}; + &scif2 { pinctrl-0 = <&scif2_pins>; pinctrl-names = "default"; @@ -60,6 +213,13 @@ status = "okay"; }; +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &wdt0 { timeout-sec = <60>; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 9217da983525..41a050d2f192 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -17,6 +17,16 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -233,12 +243,118 @@ #power-domain-cells = <0>; }; + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,r8a7796-sysc"; reg = <0 0xe6180000 0 0x0400>; #power-domain-cells = <1>; }; + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + dmas = <&dmac0 0x99>, <&dmac0 0x98>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + scif2: serial@e6e88000 { compatible = "renesas,scif-r8a7796", "renesas,rcar-gen3-scif", "renesas,scif"; @@ -251,5 +367,144 @@ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; status = "disabled"; }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7796", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a7796", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a7796", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7796"; + reg = <0 0xee100000 0 0x2000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + max-frequency = <200000000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a7796"; + reg = <0 0xee120000 0 0x2000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + max-frequency = <200000000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a7796"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + max-frequency = <200000000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a7796"; + reg = <0 0xee160000 0 0x2000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + max-frequency = <200000000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 87669f656454..3a862894ea44 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -1,6 +1,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts index 46cdddfcea6c..e5eeca2c2456 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts @@ -116,7 +116,6 @@ cap-mmc-highspeed; clock-frequency = <150000000>; disable-wp; - keep-power-in-suspend; non-removable; num-slots = <1>; vmmc-supply = <&vcc_io>; @@ -258,8 +257,6 @@ }; vcc_sd: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; regulator-name = "vcc_sd"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts index 5797933ef80e..ff5a40399d02 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts @@ -152,8 +152,6 @@ gpio = <&gpio3 11 GPIO_ACTIVE_LOW>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; vin-supply = <&vcc_io>; }; @@ -201,7 +199,6 @@ bus-width = <8>; cap-mmc-highspeed; disable-wp; - keep-power-in-suspend; mmc-pwrseq = <&emmc_pwrseq>; mmc-hs200-1_2v; mmc-hs200-1_8v; @@ -347,10 +344,9 @@ &sdmmc { bus-width = <4>; clock-frequency = <50000000>; - clock-freq-min-max = <400000 50000000>; + max-frequency = <50000000>; cap-sd-highspeed; card-detect-delay = <200>; - keep-power-in-suspend; num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts new file mode 100644 index 000000000000..85f7a243d744 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts @@ -0,0 +1,314 @@ +/* + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3368.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Rockchip PX5 EVB"; + compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368"; + + chosen { + stdout-path = "serial4:115200n8"; + }; + + memory@0 { + reg = <0x0 0x0 0x0 0x80000000>; + device_type = "memory"; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + + power { + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&emmc { + status = "okay"; + bus-width = <8>; + cap-mmc-highspeed; + clock-frequency = <150000000>; + disable-wp; + keep-power-in-suspend; + mmc-hs200-1_8v; + no-sdio; + no-sd; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc18_flash>; +}; + +&i2c0 { + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>, <&pmic_sleep>; + rockchip,system-power-controller; + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_io>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc_io>; + clock-output-names = "xin32k", "rk808-clkout2"; + #clock-cells = <1>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd_cpu"; + }; + + vdd_log: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd_log"; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + }; + + vcc18_flash: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_flash"; + }; + + vcca_33: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_33"; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + }; + + avdd_33: LDO_REG4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avdd_33"; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + }; + + vcc18_lcd: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + }; + + vcc_sd: SWITCH_REG1 { + regulator-name = "vcc_sd"; + }; + + vcc33_lcd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_lcd"; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + accelerometer@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + interrupt-parent = <&gpio2>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + status = "okay"; + + gsl1680: touchscreen@40 { + compatible = "silead,gsl1680"; + reg = <0x40>; + interrupt-parent = <&gpio3>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + power-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <800>; + touchscreen-size-y = <1280>; + silead,max-fingers = <5>; + }; +}; + +&pinctrl { + keys { + pwr_key: pwr-key { + rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_sleep: pmic-sleep { + rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; + }; + + pmic_int: pmic-int { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&sdmmc { + status = "okay"; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + no-emmc; + no-sdio; + num-slots = <1>; + sd-uhs-sdr12; + sd-uhs-sdr25; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_bus4>, <&sdmmc_cd>; + rockchip,default-sample-phase = <90>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; +}; + +&tsadc { + status = "okay"; + rockchip,hw-tshut-mode = <0>; /* CRU */ + rockchip,hw-tshut-polarity = <1>; /* high */ +}; + +&uart4 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 0fcb2147c9f9..4f2b6bdf87f2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -231,7 +231,7 @@ sdmmc: dwmmc@ff0c0000 { compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff0c0000 0x0 0x4000>; - clock-freq-min-max = <400000 150000000>; + max-frequency = <150000000>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; @@ -243,7 +243,7 @@ sdio0: dwmmc@ff0d0000 { compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff0d0000 0x0 0x4000>; - clock-freq-min-max = <400000 150000000>; + max-frequency = <150000000>; clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>, <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>; clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; @@ -255,7 +255,7 @@ emmc: dwmmc@ff0f0000 { compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff0f0000 0x0 0x4000>; - clock-freq-min-max = <400000 150000000>; + max-frequency = <150000000>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; @@ -315,16 +315,16 @@ status = "disabled"; }; - i2c1: i2c@ff140000 { + i2c2: i2c@ff140000 { compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; reg = <0x0 0xff140000 0x0 0x1000>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clock-names = "i2c"; - clocks = <&cru PCLK_I2C1>; + clocks = <&cru PCLK_I2C2>; pinctrl-names = "default"; - pinctrl-0 = <&i2c1_xfer>; + pinctrl-0 = <&i2c2_xfer>; status = "disabled"; }; @@ -554,16 +554,16 @@ status = "disabled"; }; - i2c2: i2c@ff660000 { + i2c1: i2c@ff660000 { compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; reg = <0x0 0xff660000 0x0 0x1000>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clock-names = "i2c"; - clocks = <&cru PCLK_I2C2>; + clocks = <&cru PCLK_I2C1>; pinctrl-names = "default"; - pinctrl-0 = <&i2c2_xfer>; + pinctrl-0 = <&i2c1_xfer>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index b65c193dc64e..172e7edd4915 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -235,7 +235,7 @@ "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe310000 0x0 0x4000>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>; - clock-freq-min-max = <400000 150000000>; + max-frequency = <150000000>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; @@ -248,7 +248,7 @@ "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe320000 0x0 0x4000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>; - clock-freq-min-max = <400000 150000000>; + max-frequency = <150000000>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; @@ -1023,6 +1023,9 @@ clock-names = "pclk_efuse"; /* Data cells */ + cpu_id: cpu-id@7 { + reg = <0x07 0x10>; + }; cpub_leakage: cpu-leakage@17 { reg = <0x17 0x1>; }; @@ -1148,6 +1151,7 @@ clock-names = "tcpdcore", "tcpdphy-ref"; assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>; assigned-clock-rates = <50000000>; + power-domains = <&power RK3399_PD_TCPD0>; resets = <&cru SRST_UPHY0>, <&cru SRST_UPHY0_PIPE_L00>, <&cru SRST_P_UPHY0_TCPHY>; @@ -1176,6 +1180,7 @@ clock-names = "tcpdcore", "tcpdphy-ref"; assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>; assigned-clock-rates = <50000000>; + power-domains = <&power RK3399_PD_TCPD1>; resets = <&cru SRST_UPHY1>, <&cru SRST_UPHY1_PIPE_L00>, <&cru SRST_P_UPHY1_TCPHY>; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index 3eb4c42ce7b9..7c7511b9d231 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -43,7 +43,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/memreserve/ 0x80000000 0x00000008; /* cpu-release-addr */ +/memreserve/ 0x80000000 0x00080000; / { compatible = "socionext,uniphier-ld11"; @@ -70,19 +70,60 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0 0x000>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x80000000>; + clocks = <&sys_clk 33>; + enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0 0x001>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x80000000>; + clocks = <&sys_clk 33>; + enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; }; }; + cluster0_opp: opp_table { + compatible = "operating-points-v2"; + opp-shared; + + opp@245000000 { + opp-hz = /bits/ 64 <245000000>; + clock-latency-ns = <300>; + }; + opp@250000000 { + opp-hz = /bits/ 64 <250000000>; + clock-latency-ns = <300>; + }; + opp@490000000 { + opp-hz = /bits/ 64 <490000000>; + clock-latency-ns = <300>; + }; + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + clock-latency-ns = <300>; + }; + opp@653334000 { + opp-hz = /bits/ 64 <653334000>; + clock-latency-ns = <300>; + }; + opp@666667000 { + opp-hz = /bits/ 64 <666667000>; + clock-latency-ns = <300>; + }; + opp@980000000 { + opp-hz = /bits/ 64 <980000000>; + clock-latency-ns = <300>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + clocks { refclk: ref { compatible = "fixed-clock"; @@ -233,7 +274,7 @@ }; perictrl@59820000 { - compatible = "socionext,uniphier-perictrl", + compatible = "socionext,uniphier-ld11-perictrl", "simple-mfd", "syscon"; reg = <0x59820000 0x200>; @@ -282,7 +323,7 @@ }; mioctrl@5b3e0000 { - compatible = "socionext,uniphier-mioctrl", + compatible = "socionext,uniphier-ld11-mioctrl", "simple-mfd", "syscon"; reg = <0x5b3e0000 0x800>; @@ -299,7 +340,7 @@ }; soc-glue@5f800000 { - compatible = "socionext,uniphier-soc-glue", + compatible = "socionext,uniphier-ld11-soc-glue", "simple-mfd", "syscon"; reg = <0x5f800000 0x2000>; @@ -320,7 +361,7 @@ sysctrl@61840000 { compatible = "socionext,uniphier-ld11-sysctrl", "simple-mfd", "syscon"; - reg = <0x61840000 0x4000>; + reg = <0x61840000 0x10000>; sys_clk: clock { compatible = "socionext,uniphier-ld11-clock"; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 08fd7cf7769c..fcaecc6bdeac 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -43,7 +43,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/memreserve/ 0x80000000 0x00000008; /* cpu-release-addr */ +/memreserve/ 0x80000000 0x00080000; / { compatible = "socionext,uniphier-ld20"; @@ -79,35 +79,120 @@ device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0 0x000>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x80000000>; + clocks = <&sys_clk 32>; + enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0 0x001>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x80000000>; + clocks = <&sys_clk 32>; + enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; }; cpu2: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0 0x100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x80000000>; + clocks = <&sys_clk 33>; + enable-method = "psci"; + operating-points-v2 = <&cluster1_opp>; }; cpu3: cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0 0x101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x80000000>; + clocks = <&sys_clk 33>; + enable-method = "psci"; + operating-points-v2 = <&cluster1_opp>; }; }; + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp@250000000 { + opp-hz = /bits/ 64 <250000000>; + clock-latency-ns = <300>; + }; + opp@275000000 { + opp-hz = /bits/ 64 <275000000>; + clock-latency-ns = <300>; + }; + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + clock-latency-ns = <300>; + }; + opp@550000000 { + opp-hz = /bits/ 64 <550000000>; + clock-latency-ns = <300>; + }; + opp@666667000 { + opp-hz = /bits/ 64 <666667000>; + clock-latency-ns = <300>; + }; + opp@733334000 { + opp-hz = /bits/ 64 <733334000>; + clock-latency-ns = <300>; + }; + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + clock-latency-ns = <300>; + }; + opp@1100000000 { + opp-hz = /bits/ 64 <1100000000>; + clock-latency-ns = <300>; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp@250000000 { + opp-hz = /bits/ 64 <250000000>; + clock-latency-ns = <300>; + }; + opp@275000000 { + opp-hz = /bits/ 64 <275000000>; + clock-latency-ns = <300>; + }; + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + clock-latency-ns = <300>; + }; + opp@550000000 { + opp-hz = /bits/ 64 <550000000>; + clock-latency-ns = <300>; + }; + opp@666667000 { + opp-hz = /bits/ 64 <666667000>; + clock-latency-ns = <300>; + }; + opp@733334000 { + opp-hz = /bits/ 64 <733334000>; + clock-latency-ns = <300>; + }; + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + clock-latency-ns = <300>; + }; + opp@1100000000 { + opp-hz = /bits/ 64 <1100000000>; + clock-latency-ns = <300>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + clocks { refclk: ref { compatible = "fixed-clock"; @@ -257,24 +342,24 @@ reg = <0x59801000 0x400>; }; - mioctrl@59810000 { - compatible = "socionext,uniphier-mioctrl", + sdctrl@59810000 { + compatible = "socionext,uniphier-ld20-sdctrl", "simple-mfd", "syscon"; reg = <0x59810000 0x800>; - mio_clk: clock { - compatible = "socionext,uniphier-ld20-mio-clock"; + sd_clk: clock { + compatible = "socionext,uniphier-ld20-sd-clock"; #clock-cells = <1>; }; - mio_rst: reset { - compatible = "socionext,uniphier-ld20-mio-reset"; + sd_rst: reset { + compatible = "socionext,uniphier-ld20-sd-reset"; #reset-cells = <1>; }; }; perictrl@59820000 { - compatible = "socionext,uniphier-perictrl", + compatible = "socionext,uniphier-ld20-perictrl", "simple-mfd", "syscon"; reg = <0x59820000 0x200>; @@ -290,7 +375,7 @@ }; soc-glue@5f800000 { - compatible = "socionext,uniphier-soc-glue", + compatible = "socionext,uniphier-ld20-soc-glue", "simple-mfd", "syscon"; reg = <0x5f800000 0x2000>; @@ -309,9 +394,9 @@ }; sysctrl@61840000 { - compatible = "socionext,uniphier-sysctrl", + compatible = "socionext,uniphier-ld20-sysctrl", "simple-mfd", "syscon"; - reg = <0x61840000 0x4000>; + reg = <0x61840000 0x10000>; sys_clk: clock { compatible = "socionext,uniphier-ld20-clock"; diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h index 758d74fedfad..a27c3245ba21 100644 --- a/arch/arm64/include/asm/cpufeature.h +++ b/arch/arm64/include/asm/cpufeature.h @@ -94,7 +94,7 @@ struct arm64_cpu_capabilities { u16 capability; int def_scope; /* default scope */ bool (*matches)(const struct arm64_cpu_capabilities *caps, int scope); - void (*enable)(void *); /* Called on all active CPUs */ + int (*enable)(void *); /* Called on all active CPUs */ union { struct { /* To be used for erratum handling only */ u32 midr_model; diff --git a/arch/arm64/include/asm/exec.h b/arch/arm64/include/asm/exec.h index db0563c23482..f7865dd9d868 100644 --- a/arch/arm64/include/asm/exec.h +++ b/arch/arm64/include/asm/exec.h @@ -18,6 +18,9 @@ #ifndef __ASM_EXEC_H #define __ASM_EXEC_H +#include <linux/sched.h> + extern unsigned long arch_align_stack(unsigned long sp); +void uao_thread_switch(struct task_struct *next); #endif /* __ASM_EXEC_H */ diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h index fd9d5fd788f5..f5ea0ba70f07 100644 --- a/arch/arm64/include/asm/kvm_emulate.h +++ b/arch/arm64/include/asm/kvm_emulate.h @@ -178,11 +178,6 @@ static inline bool kvm_vcpu_dabt_isvalid(const struct kvm_vcpu *vcpu) return !!(kvm_vcpu_get_hsr(vcpu) & ESR_ELx_ISV); } -static inline bool kvm_vcpu_dabt_iswrite(const struct kvm_vcpu *vcpu) -{ - return !!(kvm_vcpu_get_hsr(vcpu) & ESR_ELx_WNR); -} - static inline bool kvm_vcpu_dabt_issext(const struct kvm_vcpu *vcpu) { return !!(kvm_vcpu_get_hsr(vcpu) & ESR_ELx_SSE); @@ -203,6 +198,12 @@ static inline bool kvm_vcpu_dabt_iss1tw(const struct kvm_vcpu *vcpu) return !!(kvm_vcpu_get_hsr(vcpu) & ESR_ELx_S1PTW); } +static inline bool kvm_vcpu_dabt_iswrite(const struct kvm_vcpu *vcpu) +{ + return !!(kvm_vcpu_get_hsr(vcpu) & ESR_ELx_WNR) || + kvm_vcpu_dabt_iss1tw(vcpu); /* AF/DBM update */ +} + static inline bool kvm_vcpu_dabt_is_cm(const struct kvm_vcpu *vcpu) { return !!(kvm_vcpu_get_hsr(vcpu) & ESR_ELx_CM); diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h index ba62df8c6e35..b71086d25195 100644 --- a/arch/arm64/include/asm/memory.h +++ b/arch/arm64/include/asm/memory.h @@ -217,7 +217,7 @@ static inline void *phys_to_virt(phys_addr_t x) #define _virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) #else #define __virt_to_pgoff(kaddr) (((u64)(kaddr) & ~PAGE_OFFSET) / PAGE_SIZE * sizeof(struct page)) -#define __page_to_voff(kaddr) (((u64)(page) & ~VMEMMAP_START) * PAGE_SIZE / sizeof(struct page)) +#define __page_to_voff(page) (((u64)(page) & ~VMEMMAP_START) * PAGE_SIZE / sizeof(struct page)) #define page_to_virt(page) ((void *)((__page_to_voff(page)) | PAGE_OFFSET)) #define virt_to_page(vaddr) ((struct page *)((__virt_to_pgoff(vaddr)) | VMEMMAP_START)) diff --git a/arch/arm64/include/asm/module.h b/arch/arm64/include/asm/module.h index e12af6754634..06ff7fd9e81f 100644 --- a/arch/arm64/include/asm/module.h +++ b/arch/arm64/include/asm/module.h @@ -17,6 +17,7 @@ #define __ASM_MODULE_H #include <asm-generic/module.h> +#include <asm/memory.h> #define MODULE_ARCH_VERMAGIC "aarch64" @@ -32,6 +33,10 @@ u64 module_emit_plt_entry(struct module *mod, const Elf64_Rela *rela, Elf64_Sym *sym); #ifdef CONFIG_RANDOMIZE_BASE +#ifdef CONFIG_MODVERSIONS +#define ARCH_RELOCATES_KCRCTAB +#define reloc_start (kimage_vaddr - KIMAGE_VADDR) +#endif extern u64 module_alloc_base; #else #define module_alloc_base ((u64)_etext - MODULES_VSIZE) diff --git a/arch/arm64/include/asm/percpu.h b/arch/arm64/include/asm/percpu.h index 2fee2f59288c..5394c8405e66 100644 --- a/arch/arm64/include/asm/percpu.h +++ b/arch/arm64/include/asm/percpu.h @@ -44,48 +44,44 @@ static inline unsigned long __percpu_##op(void *ptr, \ \ switch (size) { \ case 1: \ - do { \ - asm ("//__per_cpu_" #op "_1\n" \ - "ldxrb %w[ret], %[ptr]\n" \ + asm ("//__per_cpu_" #op "_1\n" \ + "1: ldxrb %w[ret], %[ptr]\n" \ #asm_op " %w[ret], %w[ret], %w[val]\n" \ - "stxrb %w[loop], %w[ret], %[ptr]\n" \ - : [loop] "=&r" (loop), [ret] "=&r" (ret), \ - [ptr] "+Q"(*(u8 *)ptr) \ - : [val] "Ir" (val)); \ - } while (loop); \ + " stxrb %w[loop], %w[ret], %[ptr]\n" \ + " cbnz %w[loop], 1b" \ + : [loop] "=&r" (loop), [ret] "=&r" (ret), \ + [ptr] "+Q"(*(u8 *)ptr) \ + : [val] "Ir" (val)); \ break; \ case 2: \ - do { \ - asm ("//__per_cpu_" #op "_2\n" \ - "ldxrh %w[ret], %[ptr]\n" \ + asm ("//__per_cpu_" #op "_2\n" \ + "1: ldxrh %w[ret], %[ptr]\n" \ #asm_op " %w[ret], %w[ret], %w[val]\n" \ - "stxrh %w[loop], %w[ret], %[ptr]\n" \ - : [loop] "=&r" (loop), [ret] "=&r" (ret), \ - [ptr] "+Q"(*(u16 *)ptr) \ - : [val] "Ir" (val)); \ - } while (loop); \ + " stxrh %w[loop], %w[ret], %[ptr]\n" \ + " cbnz %w[loop], 1b" \ + : [loop] "=&r" (loop), [ret] "=&r" (ret), \ + [ptr] "+Q"(*(u16 *)ptr) \ + : [val] "Ir" (val)); \ break; \ case 4: \ - do { \ - asm ("//__per_cpu_" #op "_4\n" \ - "ldxr %w[ret], %[ptr]\n" \ + asm ("//__per_cpu_" #op "_4\n" \ + "1: ldxr %w[ret], %[ptr]\n" \ #asm_op " %w[ret], %w[ret], %w[val]\n" \ - "stxr %w[loop], %w[ret], %[ptr]\n" \ - : [loop] "=&r" (loop), [ret] "=&r" (ret), \ - [ptr] "+Q"(*(u32 *)ptr) \ - : [val] "Ir" (val)); \ - } while (loop); \ + " stxr %w[loop], %w[ret], %[ptr]\n" \ + " cbnz %w[loop], 1b" \ + : [loop] "=&r" (loop), [ret] "=&r" (ret), \ + [ptr] "+Q"(*(u32 *)ptr) \ + : [val] "Ir" (val)); \ break; \ case 8: \ - do { \ - asm ("//__per_cpu_" #op "_8\n" \ - "ldxr %[ret], %[ptr]\n" \ + asm ("//__per_cpu_" #op "_8\n" \ + "1: ldxr %[ret], %[ptr]\n" \ #asm_op " %[ret], %[ret], %[val]\n" \ - "stxr %w[loop], %[ret], %[ptr]\n" \ - : [loop] "=&r" (loop), [ret] "=&r" (ret), \ - [ptr] "+Q"(*(u64 *)ptr) \ - : [val] "Ir" (val)); \ - } while (loop); \ + " stxr %w[loop], %[ret], %[ptr]\n" \ + " cbnz %w[loop], 1b" \ + : [loop] "=&r" (loop), [ret] "=&r" (ret), \ + [ptr] "+Q"(*(u64 *)ptr) \ + : [val] "Ir" (val)); \ break; \ default: \ BUILD_BUG(); \ @@ -150,44 +146,40 @@ static inline unsigned long __percpu_xchg(void *ptr, unsigned long val, switch (size) { case 1: - do { - asm ("//__percpu_xchg_1\n" - "ldxrb %w[ret], %[ptr]\n" - "stxrb %w[loop], %w[val], %[ptr]\n" - : [loop] "=&r"(loop), [ret] "=&r"(ret), - [ptr] "+Q"(*(u8 *)ptr) - : [val] "r" (val)); - } while (loop); + asm ("//__percpu_xchg_1\n" + "1: ldxrb %w[ret], %[ptr]\n" + " stxrb %w[loop], %w[val], %[ptr]\n" + " cbnz %w[loop], 1b" + : [loop] "=&r"(loop), [ret] "=&r"(ret), + [ptr] "+Q"(*(u8 *)ptr) + : [val] "r" (val)); break; case 2: - do { - asm ("//__percpu_xchg_2\n" - "ldxrh %w[ret], %[ptr]\n" - "stxrh %w[loop], %w[val], %[ptr]\n" - : [loop] "=&r"(loop), [ret] "=&r"(ret), - [ptr] "+Q"(*(u16 *)ptr) - : [val] "r" (val)); - } while (loop); + asm ("//__percpu_xchg_2\n" + "1: ldxrh %w[ret], %[ptr]\n" + " stxrh %w[loop], %w[val], %[ptr]\n" + " cbnz %w[loop], 1b" + : [loop] "=&r"(loop), [ret] "=&r"(ret), + [ptr] "+Q"(*(u16 *)ptr) + : [val] "r" (val)); break; case 4: - do { - asm ("//__percpu_xchg_4\n" - "ldxr %w[ret], %[ptr]\n" - "stxr %w[loop], %w[val], %[ptr]\n" - : [loop] "=&r"(loop), [ret] "=&r"(ret), - [ptr] "+Q"(*(u32 *)ptr) - : [val] "r" (val)); - } while (loop); + asm ("//__percpu_xchg_4\n" + "1: ldxr %w[ret], %[ptr]\n" + " stxr %w[loop], %w[val], %[ptr]\n" + " cbnz %w[loop], 1b" + : [loop] "=&r"(loop), [ret] "=&r"(ret), + [ptr] "+Q"(*(u32 *)ptr) + : [val] "r" (val)); break; case 8: - do { - asm ("//__percpu_xchg_8\n" - "ldxr %[ret], %[ptr]\n" - "stxr %w[loop], %[val], %[ptr]\n" - : [loop] "=&r"(loop), [ret] "=&r"(ret), - [ptr] "+Q"(*(u64 *)ptr) - : [val] "r" (val)); - } while (loop); + asm ("//__percpu_xchg_8\n" + "1: ldxr %[ret], %[ptr]\n" + " stxr %w[loop], %[val], %[ptr]\n" + " cbnz %w[loop], 1b" + : [loop] "=&r"(loop), [ret] "=&r"(ret), + [ptr] "+Q"(*(u64 *)ptr) + : [val] "r" (val)); break; default: BUILD_BUG(); diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index df2e53d3a969..60e34824e18c 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -188,8 +188,8 @@ static inline void spin_lock_prefetch(const void *ptr) #endif -void cpu_enable_pan(void *__unused); -void cpu_enable_uao(void *__unused); -void cpu_enable_cache_maint_trap(void *__unused); +int cpu_enable_pan(void *__unused); +int cpu_enable_uao(void *__unused); +int cpu_enable_cache_maint_trap(void *__unused); #endif /* __ASM_PROCESSOR_H */ diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index e8d46e8e6079..6c80b3699cb8 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -286,7 +286,7 @@ asm( #define write_sysreg_s(v, r) do { \ u64 __val = (u64)v; \ - asm volatile("msr_s " __stringify(r) ", %0" : : "rZ" (__val)); \ + asm volatile("msr_s " __stringify(r) ", %x0" : : "rZ" (__val)); \ } while (0) static inline void config_sctlr_el1(u32 clear, u32 set) diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h index bcaf6fba1b65..55d0adbf6509 100644 --- a/arch/arm64/include/asm/uaccess.h +++ b/arch/arm64/include/asm/uaccess.h @@ -21,6 +21,7 @@ /* * User space memory access functions */ +#include <linux/bitops.h> #include <linux/kasan-checks.h> #include <linux/string.h> #include <linux/thread_info.h> @@ -102,6 +103,13 @@ static inline void set_fs(mm_segment_t fs) flag; \ }) +/* + * When dealing with data aborts or instruction traps we may end up with + * a tagged userland pointer. Clear the tag to get a sane pointer to pass + * on to access_ok(), for instance. + */ +#define untagged_addr(addr) sign_extend64(addr, 55) + #define access_ok(type, addr, size) __range_ok(addr, size) #define user_addr_max get_fs diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c index 42ffdb54e162..b0988bb1bf64 100644 --- a/arch/arm64/kernel/armv8_deprecated.c +++ b/arch/arm64/kernel/armv8_deprecated.c @@ -280,35 +280,43 @@ static void __init register_insn_emulation_sysctl(struct ctl_table *table) /* * Error-checking SWP macros implemented using ldxr{b}/stxr{b} */ -#define __user_swpX_asm(data, addr, res, temp, B) \ + +/* Arbitrary constant to ensure forward-progress of the LL/SC loop */ +#define __SWP_LL_SC_LOOPS 4 + +#define __user_swpX_asm(data, addr, res, temp, temp2, B) \ __asm__ __volatile__( \ + " mov %w3, %w7\n" \ ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_HAS_PAN, \ CONFIG_ARM64_PAN) \ - "0: ldxr"B" %w2, [%3]\n" \ - "1: stxr"B" %w0, %w1, [%3]\n" \ + "0: ldxr"B" %w2, [%4]\n" \ + "1: stxr"B" %w0, %w1, [%4]\n" \ " cbz %w0, 2f\n" \ - " mov %w0, %w4\n" \ + " sub %w3, %w3, #1\n" \ + " cbnz %w3, 0b\n" \ + " mov %w0, %w5\n" \ " b 3f\n" \ "2:\n" \ " mov %w1, %w2\n" \ "3:\n" \ " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ - "4: mov %w0, %w5\n" \ + "4: mov %w0, %w6\n" \ " b 3b\n" \ " .popsection" \ _ASM_EXTABLE(0b, 4b) \ _ASM_EXTABLE(1b, 4b) \ ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN, \ CONFIG_ARM64_PAN) \ - : "=&r" (res), "+r" (data), "=&r" (temp) \ - : "r" (addr), "i" (-EAGAIN), "i" (-EFAULT) \ + : "=&r" (res), "+r" (data), "=&r" (temp), "=&r" (temp2) \ + : "r" (addr), "i" (-EAGAIN), "i" (-EFAULT), \ + "i" (__SWP_LL_SC_LOOPS) \ : "memory") -#define __user_swp_asm(data, addr, res, temp) \ - __user_swpX_asm(data, addr, res, temp, "") -#define __user_swpb_asm(data, addr, res, temp) \ - __user_swpX_asm(data, addr, res, temp, "b") +#define __user_swp_asm(data, addr, res, temp, temp2) \ + __user_swpX_asm(data, addr, res, temp, temp2, "") +#define __user_swpb_asm(data, addr, res, temp, temp2) \ + __user_swpX_asm(data, addr, res, temp, temp2, "b") /* * Bit 22 of the instruction encoding distinguishes between @@ -328,12 +336,12 @@ static int emulate_swpX(unsigned int address, unsigned int *data, } while (1) { - unsigned long temp; + unsigned long temp, temp2; if (type == TYPE_SWPB) - __user_swpb_asm(*data, address, res, temp); + __user_swpb_asm(*data, address, res, temp, temp2); else - __user_swp_asm(*data, address, res, temp); + __user_swp_asm(*data, address, res, temp, temp2); if (likely(res != -EAGAIN) || signal_pending(current)) break; diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index 0150394f4cab..b75e917aac46 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -39,10 +39,11 @@ has_mismatched_cache_line_size(const struct arm64_cpu_capabilities *entry, (arm64_ftr_reg_ctrel0.sys_val & arm64_ftr_reg_ctrel0.strict_mask); } -static void cpu_enable_trap_ctr_access(void *__unused) +static int cpu_enable_trap_ctr_access(void *__unused) { /* Clear SCTLR_EL1.UCT */ config_sctlr_el1(SCTLR_EL1_UCT, 0); + return 0; } #define MIDR_RANGE(model, min, max) \ diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index d577f263cc4a..c02504ea304b 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -19,7 +19,9 @@ #define pr_fmt(fmt) "CPU features: " fmt #include <linux/bsearch.h> +#include <linux/cpumask.h> #include <linux/sort.h> +#include <linux/stop_machine.h> #include <linux/types.h> #include <asm/cpu.h> #include <asm/cpufeature.h> @@ -941,7 +943,13 @@ void __init enable_cpu_capabilities(const struct arm64_cpu_capabilities *caps) { for (; caps->matches; caps++) if (caps->enable && cpus_have_cap(caps->capability)) - on_each_cpu(caps->enable, NULL, true); + /* + * Use stop_machine() as it schedules the work allowing + * us to modify PSTATE, instead of on_each_cpu() which + * uses an IPI, giving us a PSTATE that disappears when + * we return. + */ + stop_machine(caps->enable, NULL, cpu_online_mask); } /* diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index 427f6d3f084c..332e33193ccf 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -586,8 +586,9 @@ CPU_LE( movk x0, #0x30d0, lsl #16 ) // Clear EE and E0E on LE systems b.lt 4f // Skip if no PMU present mrs x0, pmcr_el0 // Disable debug access traps ubfx x0, x0, #11, #5 // to EL2 and allow access to - msr mdcr_el2, x0 // all PMU counters from EL1 4: + csel x0, xzr, x0, lt // all PMU counters from EL1 + msr mdcr_el2, x0 // (if they exist) /* Stage-2 translation */ msr vttbr_el2, xzr diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index 27b2f1387df4..01753cd7d3f0 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -49,6 +49,7 @@ #include <asm/alternative.h> #include <asm/compat.h> #include <asm/cacheflush.h> +#include <asm/exec.h> #include <asm/fpsimd.h> #include <asm/mmu_context.h> #include <asm/processor.h> @@ -186,10 +187,19 @@ void __show_regs(struct pt_regs *regs) printk("pc : [<%016llx>] lr : [<%016llx>] pstate: %08llx\n", regs->pc, lr, regs->pstate); printk("sp : %016llx\n", sp); - for (i = top_reg; i >= 0; i--) { + + i = top_reg; + + while (i >= 0) { printk("x%-2d: %016llx ", i, regs->regs[i]); - if (i % 2 == 0) - printk("\n"); + i--; + + if (i % 2 == 0) { + pr_cont("x%-2d: %016llx ", i, regs->regs[i]); + i--; + } + + pr_cont("\n"); } printk("\n"); } @@ -301,7 +311,7 @@ static void tls_thread_switch(struct task_struct *next) } /* Restore the UAO state depending on next's addr_limit */ -static void uao_thread_switch(struct task_struct *next) +void uao_thread_switch(struct task_struct *next) { if (IS_ENABLED(CONFIG_ARM64_UAO)) { if (task_thread_info(next)->addr_limit == KERNEL_DS) diff --git a/arch/arm64/kernel/sleep.S b/arch/arm64/kernel/sleep.S index b8799e7c79de..1bec41b5fda3 100644 --- a/arch/arm64/kernel/sleep.S +++ b/arch/arm64/kernel/sleep.S @@ -135,7 +135,7 @@ ENTRY(_cpu_resume) #ifdef CONFIG_KASAN mov x0, sp - bl kasan_unpoison_remaining_stack + bl kasan_unpoison_task_stack_below #endif ldp x19, x20, [x29, #16] diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index d3f151cfd4a1..8507703dabe4 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -544,6 +544,7 @@ acpi_map_gic_cpu_interface(struct acpi_madt_generic_interrupt *processor) return; } bootcpu_valid = true; + early_map_cpu_to_node(0, acpi_numa_get_nid(0, hwid)); return; } diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c index ad734142070d..bb0cd787a9d3 100644 --- a/arch/arm64/kernel/suspend.c +++ b/arch/arm64/kernel/suspend.c @@ -1,8 +1,11 @@ #include <linux/ftrace.h> #include <linux/percpu.h> #include <linux/slab.h> +#include <asm/alternative.h> #include <asm/cacheflush.h> +#include <asm/cpufeature.h> #include <asm/debug-monitors.h> +#include <asm/exec.h> #include <asm/pgtable.h> #include <asm/memory.h> #include <asm/mmu_context.h> @@ -50,6 +53,14 @@ void notrace __cpu_suspend_exit(void) set_my_cpu_offset(per_cpu_offset(cpu)); /* + * PSTATE was not saved over suspend/resume, re-enable any detected + * features that might not have been set correctly. + */ + asm(ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN, + CONFIG_ARM64_PAN)); + uao_thread_switch(current); + + /* * Restore HW breakpoint registers to sane values * before debug exceptions are possibly reenabled * through local_dbg_restore. diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index 5ff020f8fb7f..c9986b3e0a96 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -428,24 +428,28 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) force_signal_inject(SIGILL, ILL_ILLOPC, regs, 0); } -void cpu_enable_cache_maint_trap(void *__unused) +int cpu_enable_cache_maint_trap(void *__unused) { config_sctlr_el1(SCTLR_EL1_UCI, 0); + return 0; } #define __user_cache_maint(insn, address, res) \ - asm volatile ( \ - "1: " insn ", %1\n" \ - " mov %w0, #0\n" \ - "2:\n" \ - " .pushsection .fixup,\"ax\"\n" \ - " .align 2\n" \ - "3: mov %w0, %w2\n" \ - " b 2b\n" \ - " .popsection\n" \ - _ASM_EXTABLE(1b, 3b) \ - : "=r" (res) \ - : "r" (address), "i" (-EFAULT) ) + if (untagged_addr(address) >= user_addr_max()) \ + res = -EFAULT; \ + else \ + asm volatile ( \ + "1: " insn ", %1\n" \ + " mov %w0, #0\n" \ + "2:\n" \ + " .pushsection .fixup,\"ax\"\n" \ + " .align 2\n" \ + "3: mov %w0, %w2\n" \ + " b 2b\n" \ + " .popsection\n" \ + _ASM_EXTABLE(1b, 3b) \ + : "=r" (res) \ + : "r" (address), "i" (-EFAULT) ) static void user_cache_maint_handler(unsigned int esr, struct pt_regs *regs) { diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 53d9159662fe..0f8788374815 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -29,7 +29,9 @@ #include <linux/sched.h> #include <linux/highmem.h> #include <linux/perf_event.h> +#include <linux/preempt.h> +#include <asm/bug.h> #include <asm/cpufeature.h> #include <asm/exception.h> #include <asm/debug-monitors.h> @@ -670,9 +672,17 @@ asmlinkage int __exception do_debug_exception(unsigned long addr, NOKPROBE_SYMBOL(do_debug_exception); #ifdef CONFIG_ARM64_PAN -void cpu_enable_pan(void *__unused) +int cpu_enable_pan(void *__unused) { + /* + * We modify PSTATE. This won't work from irq context as the PSTATE + * is discarded once we return from the exception. + */ + WARN_ON_ONCE(in_interrupt()); + config_sctlr_el1(SCTLR_EL1_SPAN, 0); + asm(SET_PSTATE_PAN(1)); + return 0; } #endif /* CONFIG_ARM64_PAN */ @@ -683,8 +693,9 @@ void cpu_enable_pan(void *__unused) * We need to enable the feature at runtime (instead of adding it to * PSR_MODE_EL1h) as the feature may not be implemented by the cpu. */ -void cpu_enable_uao(void *__unused) +int cpu_enable_uao(void *__unused) { asm(SET_PSTATE_UAO(1)); + return 0; } #endif /* CONFIG_ARM64_UAO */ diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 21c489bdeb4e..212c4d1e2f26 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -421,35 +421,35 @@ void __init mem_init(void) pr_notice("Virtual kernel memory layout:\n"); #ifdef CONFIG_KASAN - pr_cont(" kasan : 0x%16lx - 0x%16lx (%6ld GB)\n", + pr_notice(" kasan : 0x%16lx - 0x%16lx (%6ld GB)\n", MLG(KASAN_SHADOW_START, KASAN_SHADOW_END)); #endif - pr_cont(" modules : 0x%16lx - 0x%16lx (%6ld MB)\n", + pr_notice(" modules : 0x%16lx - 0x%16lx (%6ld MB)\n", MLM(MODULES_VADDR, MODULES_END)); - pr_cont(" vmalloc : 0x%16lx - 0x%16lx (%6ld GB)\n", + pr_notice(" vmalloc : 0x%16lx - 0x%16lx (%6ld GB)\n", MLG(VMALLOC_START, VMALLOC_END)); - pr_cont(" .text : 0x%p" " - 0x%p" " (%6ld KB)\n", + pr_notice(" .text : 0x%p" " - 0x%p" " (%6ld KB)\n", MLK_ROUNDUP(_text, _etext)); - pr_cont(" .rodata : 0x%p" " - 0x%p" " (%6ld KB)\n", + pr_notice(" .rodata : 0x%p" " - 0x%p" " (%6ld KB)\n", MLK_ROUNDUP(__start_rodata, __init_begin)); - pr_cont(" .init : 0x%p" " - 0x%p" " (%6ld KB)\n", + pr_notice(" .init : 0x%p" " - 0x%p" " (%6ld KB)\n", MLK_ROUNDUP(__init_begin, __init_end)); - pr_cont(" .data : 0x%p" " - 0x%p" " (%6ld KB)\n", + pr_notice(" .data : 0x%p" " - 0x%p" " (%6ld KB)\n", MLK_ROUNDUP(_sdata, _edata)); - pr_cont(" .bss : 0x%p" " - 0x%p" " (%6ld KB)\n", + pr_notice(" .bss : 0x%p" " - 0x%p" " (%6ld KB)\n", MLK_ROUNDUP(__bss_start, __bss_stop)); - pr_cont(" fixed : 0x%16lx - 0x%16lx (%6ld KB)\n", + pr_notice(" fixed : 0x%16lx - 0x%16lx (%6ld KB)\n", MLK(FIXADDR_START, FIXADDR_TOP)); - pr_cont(" PCI I/O : 0x%16lx - 0x%16lx (%6ld MB)\n", + pr_notice(" PCI I/O : 0x%16lx - 0x%16lx (%6ld MB)\n", MLM(PCI_IO_START, PCI_IO_END)); #ifdef CONFIG_SPARSEMEM_VMEMMAP - pr_cont(" vmemmap : 0x%16lx - 0x%16lx (%6ld GB maximum)\n", + pr_notice(" vmemmap : 0x%16lx - 0x%16lx (%6ld GB maximum)\n", MLG(VMEMMAP_START, VMEMMAP_START + VMEMMAP_SIZE)); - pr_cont(" 0x%16lx - 0x%16lx (%6ld MB actual)\n", + pr_notice(" 0x%16lx - 0x%16lx (%6ld MB actual)\n", MLM((unsigned long)phys_to_page(memblock_start_of_DRAM()), (unsigned long)virt_to_page(high_memory))); #endif - pr_cont(" memory : 0x%16lx - 0x%16lx (%6ld MB)\n", + pr_notice(" memory : 0x%16lx - 0x%16lx (%6ld MB)\n", MLM(__phys_to_virt(memblock_start_of_DRAM()), (unsigned long)high_memory)); diff --git a/arch/arm64/mm/numa.c b/arch/arm64/mm/numa.c index 778a985c8a70..4b32168cf91a 100644 --- a/arch/arm64/mm/numa.c +++ b/arch/arm64/mm/numa.c @@ -147,7 +147,7 @@ static int __init early_cpu_to_node(int cpu) static int __init pcpu_cpu_distance(unsigned int from, unsigned int to) { - return node_distance(from, to); + return node_distance(early_cpu_to_node(from), early_cpu_to_node(to)); } static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, @@ -223,8 +223,11 @@ static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn) void *nd; int tnid; - pr_info("Initmem setup node %d [mem %#010Lx-%#010Lx]\n", - nid, start_pfn << PAGE_SHIFT, (end_pfn << PAGE_SHIFT) - 1); + if (start_pfn < end_pfn) + pr_info("Initmem setup node %d [mem %#010Lx-%#010Lx]\n", nid, + start_pfn << PAGE_SHIFT, (end_pfn << PAGE_SHIFT) - 1); + else + pr_info("Initmem setup node %d [<memory-less node>]\n", nid); nd_pa = memblock_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid); nd = __va(nd_pa); |