diff options
Diffstat (limited to 'arch/arm64')
275 files changed, 19250 insertions, 5106 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 29e75b47becd..787d7850e064 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -11,6 +11,8 @@ config ARM64 select ARCH_CLOCKSOURCE_DATA select ARCH_HAS_DEBUG_VIRTUAL select ARCH_HAS_DEVMEM_IS_ALLOWED + select ARCH_HAS_DMA_COHERENT_TO_PFN + select ARCH_HAS_DMA_MMAP_PGPROT select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI select ARCH_HAS_ELF_RANDOMIZE select ARCH_HAS_FAST_MULTIPLIER @@ -24,6 +26,8 @@ config ARM64 select ARCH_HAS_SG_CHAIN select ARCH_HAS_STRICT_KERNEL_RWX select ARCH_HAS_STRICT_MODULE_RWX + select ARCH_HAS_SYNC_DMA_FOR_DEVICE + select ARCH_HAS_SYNC_DMA_FOR_CPU select ARCH_HAS_SYSCALL_WRAPPER select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_HAVE_NMI_SAFE_CMPXCHG @@ -75,6 +79,7 @@ config ARM64 select CLONE_BACKWARDS select COMMON_CLK select CPU_PM if (SUSPEND || CPU_IDLE) + select CRC32 select DCACHE_WORD_ACCESS select DMA_DIRECT_OPS select EDAC_SUPPORT @@ -104,6 +109,7 @@ config ARM64 select HAVE_ARCH_BITREVERSE select HAVE_ARCH_HUGE_VMAP select HAVE_ARCH_JUMP_LABEL + select HAVE_ARCH_JUMP_LABEL_RELATIVE select HAVE_ARCH_KASAN if !(ARM64_16K_PAGES && ARM64_VA_BITS_48) select HAVE_ARCH_KGDB select HAVE_ARCH_MMAP_RND_BITS @@ -133,7 +139,6 @@ config ARM64 select HAVE_GENERIC_DMA_COHERENT select HAVE_HW_BREAKPOINT if PERF_EVENTS select HAVE_IRQ_TIME_ACCOUNTING - select HAVE_MEMBLOCK select HAVE_MEMBLOCK_NODE_MAP if NUMA select HAVE_NMI select HAVE_PATA_PLATFORM @@ -142,6 +147,7 @@ config ARM64 select HAVE_PERF_USER_STACK_DUMP select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_RCU_TABLE_FREE + select HAVE_RCU_TABLE_INVALIDATE select HAVE_RSEQ select HAVE_STACKPROTECTOR select HAVE_SYSCALL_TRACEPOINTS @@ -154,7 +160,6 @@ config ARM64 select MULTI_IRQ_HANDLER select NEED_DMA_MAP_STATE select NEED_SG_DMA_LENGTH - select NO_BOOTMEM select OF select OF_EARLY_FLATTREE select OF_RESERVED_MEM @@ -479,6 +484,19 @@ config ARM64_ERRATUM_1024718 If unsure, say Y. +config ARM64_ERRATUM_1188873 + bool "Cortex-A76: MRC read following MRRC read of specific Generic Timer in AArch32 might give incorrect result" + default y + select ARM_ARCH_TIMER_OOL_WORKAROUND + help + This option adds work arounds for ARM Cortex-A76 erratum 1188873 + + Affected Cortex-A76 cores (r0p0, r1p0, r2p0) could cause + register corruption when accessing the timer registers from + AArch32 userspace. + + If unsure, say Y. + config CAVIUM_ERRATUM_22375 bool "Cavium erratum 22375, 24313" default y @@ -763,16 +781,12 @@ config NEED_PER_CPU_EMBED_FIRST_CHUNK config HOLES_IN_ZONE def_bool y - depends on NUMA source kernel/Kconfig.hz config ARCH_SUPPORTS_DEBUG_PAGEALLOC def_bool y -config ARCH_HAS_HOLES_MEMORYMODEL - def_bool y if SPARSEMEM - config ARCH_SPARSEMEM_ENABLE def_bool y select SPARSEMEM_VMEMMAP_ENABLE @@ -787,7 +801,7 @@ config ARCH_FLATMEM_ENABLE def_bool !NUMA config HAVE_ARCH_PFN_VALID - def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM + def_bool y config HW_PERF_EVENTS def_bool y @@ -1133,6 +1147,20 @@ config ARM64_RAS_EXTN and access the new registers if the system supports the extension. Platform RAS features may additionally depend on firmware support. +config ARM64_CNP + bool "Enable support for Common Not Private (CNP) translations" + default y + depends on ARM64_PAN || !ARM64_SW_TTBR0_PAN + help + Common Not Private (CNP) allows translation table entries to + be shared between different PEs in the same inner shareable + domain, so the hardware can use this fact to optimise the + caching of such entries in the TLB. + + Selecting this option allows the CNP feature to be detected + at runtime, and does not affect PEs that do not implement + this feature. + endmenu config ARM64_SVE diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 393d2b524284..51bc479334a4 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -3,6 +3,7 @@ menu "Platform selection" config ARCH_ACTIONS bool "Actions Semi Platforms" select OWL_TIMER + select PINCTRL help This enables support for the Actions Semiconductor S900 SoC family. @@ -67,6 +68,7 @@ config ARCH_EXYNOS select HAVE_S3C_RTC if RTC_CLASS select PINCTRL select PINCTRL_EXYNOS + select PM_GENERIC_DOMAINS if PM select SOC_SAMSUNG help This enables support for ARMv8 based Samsung Exynos SoC family. @@ -128,6 +130,7 @@ config ARCH_MVEBU select MVEBU_ICU select MVEBU_ODMI select MVEBU_PIC + select MVEBU_SEI select OF_GPIO select PINCTRL select PINCTRL_ARMADA_37XX @@ -152,40 +155,30 @@ config ARCH_REALTEK This enables support for the ARMv8 based Realtek chipsets, like the RTD1295. -config ARCH_ROCKCHIP - bool "Rockchip Platforms" - select ARCH_HAS_RESET_CONTROLLER - select GPIOLIB - select PINCTRL - select PINCTRL_ROCKCHIP - select PM - select ROCKCHIP_TIMER - help - This enables support for the ARMv8 based Rockchip chipsets, - like the RK3368. - -config ARCH_SEATTLE - bool "AMD Seattle SoC Family" - help - This enables support for AMD Seattle SOC Family - -config ARCH_SHMOBILE - bool - -config ARCH_SYNQUACER - bool "Socionext SynQuacer SoC Family" - config ARCH_RENESAS bool "Renesas SoC Platforms" - select ARCH_SHMOBILE select PINCTRL select PM select PM_GENERIC_DOMAINS select RENESAS_IRQC select SOC_BUS + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_TMU help This enables support for the ARMv8 based Renesas SoCs. +config ARCH_R8A774A1 + bool "Renesas RZ/G2M SoC Platform" + depends on ARCH_RENESAS + help + This enables support for the Renesas RZ/G2M SoC. + +config ARCH_R8A774C0 + bool "Renesas RZ/G2E SoC Platform" + depends on ARCH_RENESAS + help + This enables support for the Renesas RZ/G2E SoC. + config ARCH_R8A7795 bool "Renesas R-Car H3 SoC Platform" depends on ARCH_RENESAS @@ -228,11 +221,31 @@ config ARCH_R8A77995 help This enables support for the Renesas R-Car D3 SoC. +config ARCH_ROCKCHIP + bool "Rockchip Platforms" + select ARCH_HAS_RESET_CONTROLLER + select GPIOLIB + select PINCTRL + select PINCTRL_ROCKCHIP + select PM + select ROCKCHIP_TIMER + help + This enables support for the ARMv8 based Rockchip chipsets, + like the RK3368. + +config ARCH_SEATTLE + bool "AMD Seattle SoC Family" + help + This enables support for AMD Seattle SOC Family + config ARCH_STRATIX10 bool "Altera's Stratix 10 SoCFPGA Family" help This enables support for Altera's Stratix 10 SoCFPGA Family. +config ARCH_SYNQUACER + bool "Socionext SynQuacer SoC Family" + config ARCH_TEGRA bool "NVIDIA Tegra SoC Family" select ARCH_HAS_RESET_CONTROLLER @@ -301,6 +314,7 @@ config ARCH_ZX config ARCH_ZYNQMP bool "Xilinx ZynqMP Family" + select ZYNQMP_FIRMWARE help This enables support for Xilinx ZynqMP Family diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 106039d25e2f..6cb9fc7e9382 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -113,9 +113,8 @@ core-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a # Default target when executing plain make boot := arch/arm64/boot KBUILD_IMAGE := $(boot)/Image.gz -KBUILD_DTBS := dtbs -all: Image.gz $(KBUILD_DTBS) +all: Image.gz Image: vmlinux @@ -127,17 +126,6 @@ Image.%: Image zinstall install: $(Q)$(MAKE) $(build)=$(boot) $@ -%.dtb: scripts - $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ - -PHONY += dtbs dtbs_install - -dtbs: prepare scripts - $(Q)$(MAKE) $(build)=$(boot)/dts - -dtbs_install: - $(Q)$(MAKE) $(dtbinst)=$(boot)/dts - PHONY += vdso_install vdso_install: $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@ @@ -145,8 +133,8 @@ vdso_install: # We use MRPROPER_FILES and CLEAN_FILES now archclean: $(Q)$(MAKE) $(clean)=$(boot) - $(Q)$(MAKE) $(clean)=$(boot)/dts +ifeq ($(KBUILD_EXTMOD),) # We need to generate vdso-offsets.h before compiling certain files in kernel/. # In order to do that, we should use the archprepare target, but we can't since # asm-offsets.h is included in some files used to generate vdso-offsets.h, and @@ -156,12 +144,11 @@ archclean: prepare: vdso_prepare vdso_prepare: prepare0 $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso include/generated/vdso-offsets.h +endif define archhelp echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)' echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' - echo '* dtbs - Build device tree blobs for enabled boards' - echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)' echo ' install - Install uncompressed kernel' echo ' zinstall - Install compressed kernel' echo ' Install using (your) ~/bin/installkernel or' diff --git a/arch/arm64/boot/dts/actions/Makefile b/arch/arm64/boot/dts/actions/Makefile index d8b923480f5a..b57fd2372ecd 100644 --- a/arch/arm64/boot/dts/actions/Makefile +++ b/arch/arm64/boot/dts/actions/Makefile @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ + dtb-$(CONFIG_ARCH_ACTIONS) += s700-cubieboard7.dtb dtb-$(CONFIG_ARCH_ACTIONS) += s900-bubblegum-96.dtb diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts index ef79d7905f44..28f3f4a0f7f0 100644 --- a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts +++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts @@ -28,12 +28,6 @@ device_type = "memory"; reg = <0x1 0xe0000000 0x0 0x0>; }; - - uart3_clk: uart3-clk { - compatible = "fixed-clock"; - clock-frequency = <921600>; - #clock-cells = <0>; - }; }; &timer { @@ -42,5 +36,4 @@ &uart3 { status = "okay"; - clocks = <&uart3_clk>; }; diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi index 66dd5309f0a2..192c7b39c8c1 100644 --- a/arch/arm64/boot/dts/actions/s700.dtsi +++ b/arch/arm64/boot/dts/actions/s700.dtsi @@ -3,6 +3,7 @@ * Copyright (c) 2017 Andreas Färber */ +#include <dt-bindings/clock/actions,s700-cmu.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -87,6 +88,12 @@ #clock-cells = <0>; }; + losc: losc { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -107,6 +114,7 @@ uart0: serial@e0120000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0120000 0x0 0x2000>; + clocks = <&cmu CLK_UART0>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -114,6 +122,7 @@ uart1: serial@e0122000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0122000 0x0 0x2000>; + clocks = <&cmu CLK_UART1>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -121,6 +130,7 @@ uart2: serial@e0124000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0124000 0x0 0x2000>; + clocks = <&cmu CLK_UART2>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -128,6 +138,7 @@ uart3: serial@e0126000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0126000 0x0 0x2000>; + clocks = <&cmu CLK_UART3>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -135,6 +146,7 @@ uart4: serial@e0128000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0128000 0x0 0x2000>; + clocks = <&cmu CLK_UART4>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -142,6 +154,7 @@ uart5: serial@e012a000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe012a000 0x0 0x2000>; + clocks = <&cmu CLK_UART5>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -149,10 +162,18 @@ uart6: serial@e012c000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe012c000 0x0 0x2000>; + clocks = <&cmu CLK_UART6>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + cmu: clock-controller@e0168000 { + compatible = "actions,s700-cmu"; + reg = <0x0 0xe0168000 0x0 0x1000>; + clocks = <&hosc>, <&losc>; + #clock-cells = <1>; + }; + sps: power-controller@e01b0100 { compatible = "actions,s700-sps"; reg = <0x0 0xe01b0100 0x0 0x100>; diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts index 21ca80f9941c..732daaa6e9d3 100644 --- a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts +++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; @@ -24,11 +23,223 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; +}; + +&i2c0 { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_default>; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_default>; +}; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_default>; +}; + +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Line names are taken from the schematic "Schematics Bubblegum96" + * version v1.0 + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Boards naming of a line and the schematic name of + * the same line are in conflict, the 96Boards specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART2. Only exception is the I2C lines for which the schematic + * naming has been preferred. This is only for the informational + * lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L" + * are the only ones actually used for GPIO. + */ + +&pinctrl { + gpio-line-names = + "GPIO-A", /* GPIO_0, LSEC pin 23 */ + "GPIO-B", /* GPIO_1, LSEC pin 24 */ + "GPIO-C", /* GPIO_2, LSEC pin 25 */ + "GPIO-D", /* GPIO_3, LSEC pin 26 */ + "GPIO-E", /* GPIO_4, LSEC pin 27 */ + "GPIO-F", /* GPIO_5, LSEC pin 28 */ + "GPIO-G", /* GPIO_6, LSEC pin 29 */ + "GPIO-H", /* GPIO_7, LSEC pin 30 */ + "GPIO-I", /* GPIO_8, LSEC pin 31 */ + "GPIO-J", /* GPIO_9, LSEC pin 32 */ + "NC", /* GPIO_10 */ + "NC", /* GPIO_11 */ + "SIRQ2_1V8", /* GPIO_12 */ + "PCM0_OUT", /* GPIO_13 */ + "WIFI_LED", /* GPIO_14 */ + "PCM0_SYNC", /* GPIO_15 */ + "PCM0_CLK", /* GPIO_16 */ + "PCM0_IN", /* GPIO_17 */ + "BT_LED", /* GPIO_18 */ + "LED0", /* GPIO_19 */ + "LED1", /* GPIO_20 */ + "JTAG_TCK", /* GPIO_21 */ + "JTAG_TMS", /* GPIO_22 */ + "JTAG_TDI", /* GPIO_23 */ + "JTAG_TDO", /* GPIO_24 */ + "[UART1_RxD]", /* GPIO_25, LSEC pin 13 */ + "NC", /* GPIO_26 */ + "[UART1_TxD]", /* GPIO_27, LSEC pin 11 */ + "SD0_D0", /* GPIO_28 */ + "SD0_D1", /* GPIO_29 */ + "SD0_D2", /* GPIO_30 */ + "SD0_D3", /* GPIO_31 */ + "SD1_D0", /* GPIO_32 */ + "SD1_D1", /* GPIO_33 */ + "SD1_D2", /* GPIO_34 */ + "SD1_D3", /* GPIO_35 */ + "SD0_CMD", /* GPIO_36 */ + "SD0_CLK", /* GPIO_37 */ + "SD1_CMD", /* GPIO_38 */ + "SD1_CLK", /* GPIO_39 */ + "SPI0_SCLK", /* GPIO_40, LSEC pin 8 */ + "SPI0_CS", /* GPIO_41, LSEC pin 12 */ + "SPI0_DIN", /* GPIO_42, LSEC pin 10 */ + "SPI0_DOUT", /* GPIO_43, LSEC pin 14 */ + "I2C5_SDATA", /* GPIO_44, HSEC pin 36 */ + "I2C5_SCLK", /* GPIO_45, HSEC pin 38 */ + "UART0_RX", /* GPIO_46, LSEC pin 7 */ + "UART0_TX", /* GPIO_47, LSEC pin 5 */ + "UART0_RTSB", /* GPIO_48, LSEC pin 9 */ + "UART0_CTSB", /* GPIO_49, LSEC pin 3 */ + "I2C4_SCLK", /* GPIO_50, HSEC pin 32 */ + "I2C4_SDATA", /* GPIO_51, HSEC pin 34 */ + "I2C0_SCLK", /* GPIO_52 */ + "I2C0_SDATA", /* GPIO_53 */ + "I2C1_SCLK", /* GPIO_54, LSEC pin 15 */ + "I2C1_SDATA", /* GPIO_55, LSEC pin 17 */ + "I2C2_SCLK", /* GPIO_56, LSEC pin 19 */ + "I2C2_SDATA", /* GPIO_57, LSEC pin 21 */ + "CSI0_DN0", /* GPIO_58, HSEC pin 10 */ + "CSI0_DP0", /* GPIO_59, HSEC pin 8 */ + "CSI0_DN1", /* GPIO_60, HSEC pin 16 */ + "CSI0_DP1", /* GPIO_61, HSEC pin 14 */ + "CSI0_CN", /* GPIO_62, HSEC pin 4 */ + "CSI0_CP", /* GPIO_63, HSEC pin 2 */ + "CSI0_DN2", /* GPIO_64, HSEC pin 22 */ + "CSI0_DP2", /* GPIO_65, HSEC pin 20 */ + "CSI0_DN3", /* GPIO_66, HSEC pin 28 */ + "CSI0_DP3", /* GPIO_67, HSEC pin 26 */ + "[CLK0]", /* GPIO_68, HSEC pin 15 */ + "CSI1_DN0", /* GPIO_69, HSEC pin 44 */ + "CSI1_DP0", /* GPIO_70, HSEC pin 42 */ + "CSI1_DN1", /* GPIO_71, HSEC pin 50 */ + "CSI1_DP1", /* GPIO_72, HSEC pin 48 */ + "CSI1_CN", /* GPIO_73, HSEC pin 56 */ + "CSI1_CP", /* GPIO_74, HSEC pin 54 */ + "[CLK1]", /* GPIO_75, HSEC pin 17 */ + "[GPIOD0]", /* GPIO_76 */ + "[GPIOD1]", /* GPIO_77 */ + "BT_RST_N", /* GPIO_78 */ + "EXT_DC_EN", /* GPIO_79 */ + "[PCM_DI]", /* GPIO_80, LSEC pin 22 */ + "[PCM_DO]", /* GPIO_81, LSEC pin 20 */ + "[PCM_CLK]", /* GPIO_82, LSEC pin 18 */ + "[PCM_FS]", /* GPIO_83, LSEC pin 16 */ + "WAKE_BT", /* GPIO_84 */ + "WL_REG_ON", /* GPIO_85 */ + "NC", /* GPIO_86 */ + "NC", /* GPIO_87 */ + "NC", /* GPIO_88 */ + "NC", /* GPIO_89 */ + "NC", /* GPIO_90 */ + "WIFI_WAKE", /* GPIO_91 */ + "BT_WAKE", /* GPIO_92 */ + "NC", /* GPIO_93 */ + "OTG_EN2", /* GPIO_94 */ + "OTG_EN", /* GPIO_95 */ + "DSI_DP3", /* GPIO_96, HSEC pin 45 */ + "DSI_DN3", /* GPIO_97, HSEC pin 47 */ + "DSI_DP1", /* GPIO_98, HSEC pin 33 */ + "DSI_DN1", /* GPIO_99, HSEC pin 35 */ + "DSI_CP", /* GPIO_100, HSEC pin 21 */ + "DSI_CN", /* GPIO_101, HSEC pin 23 */ + "DSI_DP0", /* GPIO_102, HSEC pin 27 */ + "DSI_DN0", /* GPIO_103, HSEC pin 29 */ + "DSI_DP2", /* GPIO_104, HSEC pin 39 */ + "DSI_DN2", /* GPIO_105, HSEC pin 41 */ + "N0_D0", /* GPIO_106 */ + "N0_D1", /* GPIO_107 */ + "N0_D2", /* GPIO_108 */ + "N0_D3", /* GPIO_109 */ + "N0_D4", /* GPIO_110 */ + "N0_D5", /* GPIO_111 */ + "N0_D6", /* GPIO_112 */ + "N0_D7", /* GPIO_113 */ + "N0_DQS", /* GPIO_114 */ + "N0_DQSN", /* GPIO_115 */ + "NC", /* GPIO_116 */ + "NC", /* GPIO_117 */ + "NC", /* GPIO_118 */ + "N0_CEB1", /* GPIO_119 */ + "CARD_DT", /* GPIO_120 */ + "N0_CEB3", /* GPIO_121 */ + "SD_DAT0", /* GPIO_122, HSEC pin 1 */ + "SD_DAT1", /* GPIO_123, HSEC pin 3 */ + "SD_DAT2", /* GPIO_124, HSEC pin 5 */ + "SD_DAT3", /* GPIO_125, HSEC pin 7 */ + "NC", /* GPIO_126 */ + "NC", /* GPIO_127 */ + "[PWR_BTN_N]", /* GPIO_128, LSEC pin 4 */ + "[RST_BTN_N]", /* GPIO_129, LSEC pin 6 */ + "NC", /* GPIO_130 */ + "SD_CMD", /* GPIO_131 */ + "GPIO-L", /* GPIO_132, LSEC pin 34 */ + "GPIO-K", /* GPIO_133, LSEC pin 33 */ + "NC", /* GPIO_134 */ + "SD_SCLK", /* GPIO_135 */ + "NC", /* GPIO_136 */ + "JTAG_TRST", /* GPIO_137 */ + "I2C3_SCLK", /* GPIO_138 */ + "LED2", /* GPIO_139 */ + "LED3", /* GPIO_140 */ + "I2C3_SDATA", /* GPIO_141 */ + "UART3_RX", /* GPIO_142 */ + "UART3_TX", /* GPIO_143 */ + "UART3_RTSB", /* GPIO_144 */ + "UART3_CTSB"; /* GPIO_145 */ + + i2c0_default: i2c0-default { + pinmux { + groups = "i2c0_mfp"; + function = "i2c0"; + }; + pinconf { + pins = "i2c0_sclk", "i2c0_sdata"; + bias-pull-up; + }; + }; + + i2c1_default: i2c1-default { + pinconf { + pins = "i2c1_sclk", "i2c1_sdata"; + bias-pull-up; + }; + }; - uart5_clk: uart5-clk { - compatible = "fixed-clock"; - clock-frequency = <921600>; - #clock-cells = <0>; + i2c2_default: i2c2-default { + pinconf { + pins = "i2c2_sclk", "i2c2_sdata"; + bias-pull-up; + }; }; }; @@ -38,5 +249,4 @@ &uart5 { status = "okay"; - clocks = <&uart5_clk>; }; diff --git a/arch/arm64/boot/dts/actions/s900.dtsi b/arch/arm64/boot/dts/actions/s900.dtsi index 11406f6d3a6d..491ddccc9038 100644 --- a/arch/arm64/boot/dts/actions/s900.dtsi +++ b/arch/arm64/boot/dts/actions/s900.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +#include <dt-bindings/clock/actions,s900-cmu.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -88,6 +88,18 @@ #clock-cells = <0>; }; + losc: losc { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + + diff24M: diff24M { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -108,6 +120,7 @@ uart0: serial@e0120000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0120000 0x0 0x2000>; + clocks = <&cmu CLK_UART0>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -115,6 +128,7 @@ uart1: serial@e0122000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0122000 0x0 0x2000>; + clocks = <&cmu CLK_UART1>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -122,6 +136,7 @@ uart2: serial@e0124000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0124000 0x0 0x2000>; + clocks = <&cmu CLK_UART2>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -129,6 +144,7 @@ uart3: serial@e0126000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0126000 0x0 0x2000>; + clocks = <&cmu CLK_UART3>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -136,6 +152,7 @@ uart4: serial@e0128000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe0128000 0x0 0x2000>; + clocks = <&cmu CLK_UART4>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -143,6 +160,7 @@ uart5: serial@e012a000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe012a000 0x0 0x2000>; + clocks = <&cmu CLK_UART5>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -150,15 +168,111 @@ uart6: serial@e012c000 { compatible = "actions,s900-uart", "actions,owl-uart"; reg = <0x0 0xe012c000 0x0 0x2000>; + clocks = <&cmu CLK_UART6>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + sps: power-controller@e012e000 { + compatible = "actions,s900-sps"; + reg = <0x0 0xe012e000 0x0 0x2000>; + #power-domain-cells = <1>; + }; + + cmu: clock-controller@e0160000 { + compatible = "actions,s900-cmu"; + reg = <0x0 0xe0160000 0x0 0x1000>; + clocks = <&hosc>, <&losc>; + #clock-cells = <1>; + }; + + i2c0: i2c@e0170000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0170000 0 0x1000>; + clocks = <&cmu CLK_I2C0>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e0172000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0172000 0 0x1000>; + clocks = <&cmu CLK_I2C1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e0174000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0174000 0 0x1000>; + clocks = <&cmu CLK_I2C2>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e0176000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0176000 0 0x1000>; + clocks = <&cmu CLK_I2C3>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@e0178000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0178000 0 0x1000>; + clocks = <&cmu CLK_I2C4>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@e017a000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe017a000 0 0x1000>; + clocks = <&cmu CLK_I2C5>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pinctrl: pinctrl@e01b0000 { + compatible = "actions,s900-pinctrl"; + reg = <0x0 0xe01b0000 0x0 0x1000>; + clocks = <&cmu CLK_GPIO>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 146>; + #gpio-cells = <2>; + }; + timer: timer@e0228000 { compatible = "actions,s900-timer"; reg = <0x0 0xe0228000 0x0 0x8000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "timer1"; }; + + dma: dma-controller@e0260000 { + compatible = "actions,s900-dma"; + reg = <0x0 0xe0260000 0x0 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <12>; + dma-requests = <46>; + clocks = <&cmu CLK_DMAC>; + }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 9ffa7a038791..8d4f97f279e0 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -4,10 +4,13 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb @@ -15,4 +18,5 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts index eac4793c8502..6cb2b7f0c817 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts @@ -203,7 +203,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 094cfed13df9..ef1c90401bb2 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -60,6 +60,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -86,6 +97,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -103,6 +118,17 @@ status = "okay"; }; +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; @@ -151,7 +177,7 @@ &mmc2 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; + pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>; vmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; @@ -302,7 +328,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts index 98dbff19f5cc..31884dbc8838 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts @@ -51,12 +51,44 @@ compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; chosen { stdout-path = "serial0:115200n8"; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "nanopi-a64:blue:status"; + gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ + }; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc 1>; + clock-names = "ext_clock"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; +}; + +&de { + status = "okay"; }; &ehci0 { @@ -67,6 +99,26 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_dcdc1>; + status = "okay"; +}; + +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + /* i2c1 connected with gpio headers like pine64, bananapi */ &i2c1 { pinctrl-names = "default"; @@ -78,6 +130,13 @@ bias-pull-up; }; +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; @@ -88,6 +147,24 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dldo4>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8189etv: wifi@1 { + reg = <1>; + interrupt-parent = <&r_pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */ + interrupt-names = "host-wake"; + }; +}; + &ohci0 { status = "okay"; }; @@ -125,9 +202,9 @@ ®_dcdc1 { regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; }; ®_dcdc2 { @@ -201,7 +278,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts index 3f531393eaee..f7a4bccaa5d4 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts @@ -51,6 +51,7 @@ compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -58,12 +59,74 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + reg_usb1_vbus: usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&pio 6 9 GPIO_ACTIVE_HIGH>; /* PG9 */ + status = "okay"; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ }; }; +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_dcdc1>; + allwinner,tx-delay-ps = <600>; + status = "okay"; +}; + +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; @@ -92,6 +155,14 @@ }; }; +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + &r_rsb { status = "okay"; @@ -100,6 +171,7 @@ reg = <0x3a3>; interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ }; }; @@ -142,10 +214,14 @@ /* DCDC3 is polyphased with DCDC2 */ +/* + * The board uses DDR3L DRAM chips. 1.36V is the closest to the nominal + * 1.35V that the PMIC can drive. + */ ®_dcdc5 { regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; + regulator-min-microvolt = <1360000>; + regulator-max-microvolt = <1360000>; regulator-name = "vcc-ddr3"; }; @@ -180,6 +256,11 @@ regulator-name = "vcc-wifi-io"; }; +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + ®_eldo1 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -220,6 +301,18 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { status = "okay"; + usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus-supply = <®_usb1_vbus>; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index 1221764f5719..b0c64f75792c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -1,5 +1,6 @@ /* * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> + * Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -51,23 +52,127 @@ compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64"; aliases { + ethernet0 = &emac; serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; }; chosen { stdout-path = "serial0:115200n8"; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + status { + label = "orangepi:green:status"; + gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&pio 3 14 GPIO_ACTIVE_HIGH>; /* PD14 */ + status = "okay"; + }; + + reg_usb1_vbus: usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */ + status = "okay"; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */ + }; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; }; &ehci1 { status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_gmac_3v3>; + status = "okay"; +}; + +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_dldo2>; + vqmmc-supply = <®_dldo4>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&ohci0 { status = "okay"; }; @@ -89,9 +194,8 @@ #include "axp803.dtsi" ®_aldo1 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; regulator-name = "afvcc-csi"; }; @@ -163,12 +267,23 @@ regulator-name = "vcc-wifi-io"; }; +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + ®_eldo1 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "cpvdd"; }; +®_eldo3 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dvdd-csi"; +}; + ®_fldo1 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -195,13 +310,61 @@ vcc-hdmi-supply = <®_dldo1>; }; +&spi0 { + status = "okay"; + + spi-flash@0 { + compatible = "mxicy,mx25l1606e", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + m25p,fast-read; + status = "okay"; + }; +}; + +/* On debug connector */ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; -&usbphy { +/* Bluetooth */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; status = "okay"; }; +/* On Pi-2 connector, RTS/CTS optional */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +/* On Pi-2 connector, RTS/CTS optional */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "disabled"; +}; + +/* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "disabled"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts new file mode 100644 index 000000000000..72d6961dc312 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts @@ -0,0 +1,13 @@ +/* + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + * + * Copyright (c) 2018 ARM Ltd. + */ + +#include "sun50i-a64-sopine-baseboard.dts" + +/ { + model = "Pine64 LTS"; + compatible = "pine64,pine64-lts", "allwinner,sun50i-r18", + "allwinner,sun50i-a64"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index 1b9b92e541d2..c077b6c1f458 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -62,6 +62,21 @@ chosen { stdout-path = "serial0:115200n8"; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; +}; + +&de { + status = "okay"; }; &ehci0 { @@ -82,6 +97,17 @@ }; +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; @@ -241,7 +267,7 @@ /* On Exp and Euler connectors */ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index 897e60cbe38d..77fac84797e9 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -80,8 +80,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; disable-wp; bus-width = <4>; status = "okay"; @@ -104,7 +103,7 @@ &mmc2 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; + pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>; vmmc-supply = <®_dcdc1>; vqmmc-supply = <®_eldo1>; bus-width = <8>; @@ -143,7 +142,7 @@ &r_i2c { clock-frequency = <100000>; pinctrl-names = "default"; - pinctrl-0 = <&r_i2c_pins_a>; + pinctrl-0 = <&r_i2c_pl89_pins>; status = "okay"; }; @@ -270,7 +269,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index c21f2331add6..53fcc9098df3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -61,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + reg_vcc1v8: vcc1v8 { compatible = "regulator-fixed"; regulator-name = "vcc1v8"; @@ -69,6 +80,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -86,6 +101,17 @@ status = "okay"; }; +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mdio { ext_rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -140,7 +166,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index 81f8e0098699..c455b24dd079 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -260,7 +260,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index d3daf90a8715..f3a66f888205 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -88,6 +88,7 @@ device_type = "cpu"; reg = <0>; enable-method = "psci"; + next-level-cache = <&L2>; }; cpu1: cpu@1 { @@ -95,6 +96,7 @@ device_type = "cpu"; reg = <1>; enable-method = "psci"; + next-level-cache = <&L2>; }; cpu2: cpu@2 { @@ -102,6 +104,7 @@ device_type = "cpu"; reg = <2>; enable-method = "psci"; + next-level-cache = <&L2>; }; cpu3: cpu@3 { @@ -109,7 +112,20 @@ device_type = "cpu"; reg = <3>; enable-method = "psci"; + next-level-cache = <&L2>; }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + de: display-engine { + compatible = "allwinner,sun50i-a64-display-engine"; + allwinner,pipelines = <&mixer0>, + <&mixer1>; + status = "disabled"; }; osc24M: osc24M_clk { @@ -194,6 +210,52 @@ #clock-cells = <1>; #reset-cells = <1>; }; + + mixer0: mixer@100000 { + compatible = "allwinner,sun50i-a64-de2-mixer-0"; + reg = <0x100000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER0>, + <&display_clocks CLK_MIXER0>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_MIXER0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer0_out: port@1 { + reg = <1>; + + mixer0_out_tcon0: endpoint { + remote-endpoint = <&tcon0_in_mixer0>; + }; + }; + }; + }; + + mixer1: mixer@200000 { + compatible = "allwinner,sun50i-a64-de2-mixer-1"; + reg = <0x200000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER1>, + <&display_clocks CLK_MIXER1>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_MIXER1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer1_out: port@1 { + reg = <1>; + + mixer1_out_tcon1: endpoint { + remote-endpoint = <&tcon1_in_mixer1>; + }; + }; + }; + }; }; syscon: syscon@1c00000 { @@ -228,6 +290,75 @@ #dma-cells = <1>; }; + tcon0: lcd-controller@1c0c000 { + compatible = "allwinner,sun50i-a64-tcon-lcd", + "allwinner,sun8i-a83t-tcon-lcd"; + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; + clock-names = "ahb", "tcon-ch0"; + clock-output-names = "tcon-pixel-clock"; + resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; + reset-names = "lcd", "lvds"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + tcon1: lcd-controller@1c0d000 { + compatible = "allwinner,sun50i-a64-tcon-tv", + "allwinner,sun8i-a83t-tcon-tv"; + reg = <0x01c0d000 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>; + clock-names = "ahb", "tcon-ch1"; + resets = <&ccu RST_BUS_TCON1>; + reset-names = "lcd"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon1_in: port@0 { + reg = <0>; + + tcon1_in_mixer1: endpoint { + remote-endpoint = <&mixer1_out_tcon1>; + }; + }; + + tcon1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon1_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon1>; + }; + }; + }; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun50i-a64-mmc"; reg = <0x01c0f000 0x1000>; @@ -270,6 +401,11 @@ #size-cells = <0>; }; + sid: eeprom@1c14000 { + compatible = "allwinner,sun50i-a64-sid"; + reg = <0x1c14000 0x400>; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-a33-musb"; reg = <0x01c19000 0x0400>; @@ -399,7 +535,7 @@ }; mmc2_pins: mmc2-pins { - pins = "PC1", "PC5", "PC6", "PC8", "PC9", + pins = "PC5", "PC6", "PC8", "PC9", "PC10","PC11", "PC12", "PC13", "PC14", "PC15", "PC16"; function = "mmc2"; @@ -407,6 +543,13 @@ bias-pull-up; }; + mmc2_ds_pin: mmc2-ds-pin { + pins = "PC1"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + pwm_pin: pwm_pin { pins = "PD22"; function = "pwm"; @@ -442,7 +585,7 @@ function = "spi1"; }; - uart0_pins_a: uart0 { + uart0_pb_pins: uart0-pb-pins { pins = "PB8", "PB9"; function = "uart0"; }; @@ -686,6 +829,50 @@ status = "disabled"; }; + hdmi: hdmi@1ee0000 { + compatible = "allwinner,sun50i-a64-dw-hdmi", + "allwinner,sun8i-a83t-dw-hdmi"; + reg = <0x01ee0000 0x10000>; + reg-io-width = <1>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, + <&ccu CLK_HDMI>; + clock-names = "iahb", "isfr", "tmds"; + resets = <&ccu RST_BUS_HDMI1>; + reset-names = "ctrl"; + phys = <&hdmi_phy>; + phy-names = "hdmi-phy"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + + hdmi_in_tcon1: endpoint { + remote-endpoint = <&tcon1_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + + hdmi_phy: hdmi-phy@1ef0000 { + compatible = "allwinner,sun50i-a64-hdmi-phy"; + reg = <0x01ef0000 0x10000>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, + <&ccu 7>; + clock-names = "bus", "mod", "pll-0"; + resets = <&ccu RST_BUS_HDMI0>; + reset-names = "phy"; + #phy-cells = <0>; + }; + rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; @@ -749,7 +936,7 @@ interrupt-controller; #interrupt-cells = <3>; - r_i2c_pins_a: i2c-a { + r_i2c_pl89_pins: r-i2c-pl89-pins { pins = "PL8", "PL9"; function = "s_i2c"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts new file mode 100644 index 000000000000..2e2b14c0ae75 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org> + +/dts-v1/; +#include "sun50i-h5.dtsi" +#include <arm/sunxi-bananapi-m2-plus-v1.2.dtsi> + +/ { + model = "Banana Pi BPI-M2-Plus v1.2 H5"; + compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun50i-h5"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts new file mode 100644 index 000000000000..77661006dfba --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org> + +/dts-v1/; +#include "sun50i-h5.dtsi" +#include <arm/sunxi-bananapi-m2-plus.dtsi> + +/ { + model = "Banana Pi BPI-M2-Plus H5"; + compatible = "sinovoip,bpi-m2-plus", "allwinner,sun50i-h5"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index 62d646baac3c..b41dc1aab67d 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -92,6 +92,49 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; + + soc { + mali: gpu@1e80000 { + compatible = "allwinner,sun50i-h5-mali", "arm,mali-450"; + reg = <0x01e80000 0x30000>; + /* + * While the datasheet lists an interrupt for the + * PMU, the actual silicon does not have the PMU + * block. Reads all return zero, and writes are + * ignored. + */ + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3", + "pmu"; + clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_BUS_GPU>; + + assigned-clocks = <&ccu CLK_GPU>; + assigned-clock-rates = <384000000>; + }; + }; }; &ccu { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts new file mode 100644 index 000000000000..0612c19cd994 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2018 Amarula Solutions + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +/dts-v1/; + +#include "sun50i-h6.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "OrangePi One Plus"; + compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_cldo1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&r_i2c { + status = "okay"; + + axp805: pmic@36 { + compatible = "x-powers,axp805", "x-powers,axp806"; + reg = <0x36>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + x-powers,self-working-mode; + + regulators { + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ac200"; + }; + + reg_aldo3: aldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc25-dram"; + }; + + reg_bldo1: bldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-bias-pll"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-efuse-pcie-hdmi-io"; + }; + + reg_bldo3: bldo3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-dcxoio"; + }; + + bldo4 { + /* unused */ + }; + + reg_cldo1: cldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; + }; + + reg_cldo2: cldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-1"; + }; + + reg_cldo3: cldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; + }; + + reg_dcdca: dcdca { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdcc: dcdcc { + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-name = "vdd-gpu"; + }; + + reg_dcdcd: dcdcd { + regulator-always-on; + regulator-min-microvolt = <960000>; + regulator-max-microvolt = <960000>; + regulator-name = "vdd-sys"; + }; + + reg_dcdce: dcdce { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; + }; + + sw { + /* unused */ + }; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index ceffc40810ee..48daec7f78ba 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -46,6 +46,7 @@ pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + bus-width = <4>; status = "okay"; }; @@ -56,6 +57,7 @@ vqmmc-supply = <®_bldo2>; non-removable; cap-mmc-hw-reset; + bus-width = <8>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index cfa5fffcf62b..040828d2e2c0 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -92,6 +92,29 @@ #size-cells = <1>; ranges; + syscon: syscon@3000000 { + compatible = "allwinner,sun50i-h6-system-control", + "allwinner,sun50i-a64-system-control"; + reg = <0x03000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@28000 { + compatible = "mmio-sram"; + reg = <0x00028000 0x1e000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00028000 0x1e000>; + + de2_sram: sram-section@0 { + compatible = "allwinner,sun50i-h6-sram-c", + "allwinner,sun50i-a64-sram-c"; + reg = <0x0000 0x1e000>; + }; + }; + }; + ccu: clock@3001000 { compatible = "allwinner,sun50i-h6-ccu"; reg = <0x03001000 0x1000>; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index d033da401c26..8253a1a9e985 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -137,6 +137,8 @@ reset-names = "stmmaceth", "stmmaceth-ocp"; clocks = <&clkmgr STRATIX10_EMAC0_CLK>; clock-names = "stmmaceth"; + tx-fifo-depth = <16384>; + rx-fifo-depth = <16384>; status = "disabled"; }; @@ -150,6 +152,8 @@ reset-names = "stmmaceth", "stmmaceth-ocp"; clocks = <&clkmgr STRATIX10_EMAC1_CLK>; clock-names = "stmmaceth"; + tx-fifo-depth = <16384>; + rx-fifo-depth = <16384>; status = "disabled"; }; @@ -163,6 +167,8 @@ reset-names = "stmmaceth", "stmmaceth-ocp"; clocks = <&clkmgr STRATIX10_EMAC2_CLK>; clock-names = "stmmaceth"; + tx-fifo-depth = <16384>; + rx-fifo-depth = <16384>; status = "disabled"; }; @@ -335,7 +341,7 @@ sysmgr: sysmgr@ffd12000 { compatible = "altr,sys-mgr", "syscon"; - reg = <0xffd12000 0x1000>; + reg = <0xffd12000 0x228>; }; /* Local timer */ @@ -467,16 +473,51 @@ status = "disabled"; }; + sdr: sdr@f8011100 { + compatible = "altr,sdr-ctl", "syscon"; + reg = <0xf8011100 0xc0>; + }; + eccmgr { - compatible = "altr,socfpga-s10-ecc-manager"; + compatible = "altr,socfpga-a10-ecc-manager"; + altr,sysmgr-syscon = <&sysmgr>; + #address-cells = <1>; + #size-cells = <1>; interrupts = <0 15 4>, <0 95 4>; interrupt-controller; #interrupt-cells = <2>; + ranges; sdramedac { compatible = "altr,sdram-edac-s10"; + altr,sdr-syscon = <&sdr>; interrupts = <16 4>, <48 4>; }; + + usb0-ecc@ff8c4000 { + compatible = "altr,socfpga-usb-ecc"; + reg = <0xff8c4000 0x100>; + altr,ecc-parent = <&usb0>; + interrupts = <2 4>, + <34 4>; + }; + + emac0-rx-ecc@ff8c0000 { + compatible = "altr,socfpga-eth-mac-ecc"; + reg = <0xff8c0000 0x100>; + altr,ecc-parent = <&gmac0>; + interrupts = <4 4>, + <36 4>; + }; + + emac0-tx-ecc@ff8c0400 { + compatible = "altr,socfpga-eth-mac-ecc"; + reg = <0xff8c0400 0x100>; + altr,ecc-parent = <&gmac0>; + interrupts = <5 4>, + <37 4>; + }; + }; qspi: spi@ff8d2000 { diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 6edc4fa9fd42..2e3863ee12b3 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -21,6 +21,9 @@ aliases { serial0 = &uart0; + ethernet0 = &gmac0; + ethernet1 = &gmac1; + ethernet2 = &gmac2; }; chosen { @@ -76,7 +79,7 @@ phy-mode = "rgmii"; phy-handle = <&phy0>; - max-frame-size = <3800>; + max-frame-size = <9000>; mdio0 { #address-cells = <1>; @@ -124,6 +127,8 @@ &i2c1 { status = "okay"; clock-frequency = <100000>; + i2c-sda-falling-time-ns = <890>; /* hcnt */ + i2c-sdl-falling-time-ns = <890>; /* lcnt */ adc@14 { compatible = "lltc,ltc2497"; diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi index 125f4deb52fe..b664e7af74eb 100644 --- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi +++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi @@ -107,7 +107,7 @@ clock-names = "uartclk", "apb_pclk"; }; - spi0: ssp@e1020000 { + spi0: spi@e1020000 { status = "disabled"; compatible = "arm,pl022", "arm,primecell"; reg = <0 0xe1020000 0 0x1000>; @@ -117,7 +117,7 @@ clock-names = "apb_pclk"; }; - spi1: ssp@e1030000 { + spi1: spi@e1030000 { status = "disabled"; compatible = "arm,pl022", "arm,primecell"; reg = <0 0xe1030000 0 0x1000>; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index a97c0e2d7bc6..c31f29d660de 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index d5c01427a5ca..18778ada7bd3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -60,6 +60,55 @@ serial1 = &uart_A; }; + linein: audio-codec@0 { + #sound-dai-cells = <0>; + compatible = "everest,es7241"; + VDDA-supply = <&vcc_3v3>; + VDDP-supply = <&vcc_3v3>; + VDDD-supply = <&vcc_3v3>; + status = "okay"; + sound-name-prefix = "Linein"; + }; + + lineout: audio-codec@1 { + #sound-dai-cells = <0>; + compatible = "everest,es7154"; + VDD-supply = <&vcc_3v3>; + PVDD-supply = <&vcc_5v>; + status = "okay"; + sound-name-prefix = "Lineout"; + }; + + spdif_dit: audio-codec@2 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + + dmics: audio-codec@3 { + #sound-dai-cells = <0>; + compatible = "dmic-codec"; + num-channels = <7>; + wakeup-delay-ms = <50>; + status = "okay"; + sound-name-prefix = "MIC"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + main_12v: regulator-main_12v { compatible = "regulator-fixed"; regulator-name = "12V"; @@ -68,15 +117,26 @@ regulator-always-on; }; - vddio_boot: regulator-vddio_boot { + vcc_3v3: regulator-vcc_3v3 { compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; vin-supply = <&vddao_3v3>; regulator-always-on; }; + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + + gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + vddao_3v3: regulator-vddao_3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; @@ -95,26 +155,15 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; vin-supply = <&vddao_3v3>; regulator-always-on; }; - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "VCC5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&main_12v>; - - gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - usb_pwr: regulator-usb_pwr { compatible = "regulator-fixed"; regulator-name = "USB_PWR"; @@ -126,11 +175,6 @@ enable-active-high; }; - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; @@ -138,13 +182,6 @@ clock-names = "ext_clock"; }; - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ - }; - speaker-leds { compatible = "gpio-leds"; @@ -179,30 +216,129 @@ }; }; - linein: audio-codec@0 { - #sound-dai-cells = <0>; - compatible = "everest,es7241"; - VDDA-supply = <&vcc_3v3>; - VDDP-supply = <&vcc_3v3>; - VDDD-supply = <&vcc_3v3>; + sound { + compatible = "amlogic,axg-sound-card"; + model = "AXG-S400"; + audio-aux-devs = <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, + <&tdmin_lb>, <&tdmout_c>; + audio-widgets = "Line", "Lineout", + "Line", "Linein", + "Speaker", "Speaker1 Left", + "Speaker", "Speaker1 Right"; + audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2", + "SPDIFOUT IN 0", "FRDDR_A OUT 3", + "TDMOUT_C IN 1", "FRDDR_B OUT 2", + "SPDIFOUT IN 1", "FRDDR_B OUT 3", + "TDMOUT_C IN 2", "FRDDR_C OUT 2", + "SPDIFOUT IN 2", "FRDDR_C OUT 3", + "TDM_C Playback", "TDMOUT_C OUT", + "TDMIN_A IN 2", "TDM_C Capture", + "TDMIN_A IN 5", "TDM_C Loopback", + "TDMIN_B IN 2", "TDM_C Capture", + "TDMIN_B IN 5", "TDM_C Loopback", + "TDMIN_C IN 2", "TDM_C Capture", + "TDMIN_C IN 5", "TDM_C Loopback", + "TDMIN_LB IN 2", "TDM_C Loopback", + "TDMIN_LB IN 5", "TDM_C Capture", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT", + "TODDR_A IN 2", "TDMIN_C OUT", + "TODDR_B IN 2", "TDMIN_C OUT", + "TODDR_C IN 2", "TDMIN_C OUT", + "TODDR_A IN 4", "PDM Capture", + "TODDR_B IN 4", "PDM Capture", + "TODDR_C IN 4", "PDM Capture", + "TODDR_A IN 6", "TDMIN_LB OUT", + "TODDR_B IN 6", "TDMIN_LB OUT", + "TODDR_C IN 6", "TDMIN_LB OUT", + "Lineout", "Lineout AOUTL", + "Lineout", "Lineout AOUTR", + "Speaker1 Left", "SPK1 OUT_A", + "Speaker1 Left", "SPK1 OUT_B", + "Speaker1 Right", "SPK1 OUT_C", + "Speaker1 Right", "SPK1 OUT_D", + "Linein AINL", "Linein", + "Linein AINR", "Linein"; + assigned-clocks = <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <589824000>, + <270950400>, + <393216000>; status = "okay"; - sound-name-prefix = "Linein"; - }; - lineout: audio-codec@1 { - #sound-dai-cells = <0>; - compatible = "everest,es7154"; - VDD-supply = <&vcc_3v3>; - PVDD-supply = <&vcc_5v>; - status = "okay"; - sound-name-prefix = "Lineout"; + dai-link@0 { + sound-dai = <&frddr_a>; + }; + + dai-link@1 { + sound-dai = <&frddr_b>; + }; + + dai-link@2 { + sound-dai = <&frddr_c>; + }; + + dai-link@3 { + sound-dai = <&toddr_a>; + }; + + dai-link@4 { + sound-dai = <&toddr_b>; + }; + + dai-link@5 { + sound-dai = <&toddr_c>; + }; + + dai-link@6 { + sound-dai = <&tdmif_c>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-rx-mask-1 = <1 1>; + mclk-fs = <256>; + + codec@0 { + sound-dai = <&lineout>; + }; + + codec@1 { + sound-dai = <&speaker_amp1>; + }; + + codec@2 { + sound-dai = <&linein>; + }; + + }; + + dai-link@7 { + sound-dai = <&spdifout>; + + codec { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link@8 { + sound-dai = <&pdm>; + + codec { + sound-dai = <&dmics>; + }; + }; }; - spdif_dit: audio-codec@2 { - #sound-dai-cells = <0>; - compatible = "linux,spdif-dit"; - status = "okay"; - sound-name-prefix = "DIT"; + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ }; }; @@ -226,16 +362,16 @@ }; }; -&uart_A { +&frddr_a { status = "okay"; - pinctrl-0 = <&uart_a_pins>; - pinctrl-names = "default"; }; -&uart_AO { +&frddr_b { + status = "okay"; +}; + +&frddr_c { status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; }; &ir { @@ -260,6 +396,7 @@ PVDD_B-supply = <&main_12v>; PVDD_C-supply = <&main_12v>; PVDD_D-supply = <&main_12v>; + sound-name-prefix = "SPK1"; }; }; @@ -277,30 +414,22 @@ }; }; +&pdm { + pinctrl-0 = <&pdm_dclk_a14_pins>, <&pdm_din0_pins>, + <&pdm_din1_pins>, <&pdm_din2_pins>, <&pdm_din3_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &pwm_ab { status = "okay"; pinctrl-0 = <&pwm_a_x20_pins>; pinctrl-names = "default"; }; -/* emmc storage */ -&sd_emmc_c { +&saradc { status = "okay"; - pinctrl-0 = <&emmc_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-sd-highspeed; - cap-mmc-highspeed; - max-frequency = <180000000>; - non-removable; - disable-wp; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; + vref-supply = <&vddio_ao18>; }; /* wifi module */ @@ -330,7 +459,96 @@ }; }; -&saradc { +/* emmc storage */ +&sd_emmc_c { + status = "disabled"; + pinctrl-0 = <&emmc_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <180000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&spdifout { + pinctrl-0 = <&spdif_out_a20_pins>; + pinctrl-names = "default"; status = "okay"; - vref-supply = <&vddio_ao18>; +}; + +&tdmif_a { + pinctrl-0 = <&tdma_sclk_pins>, <&tdma_fs_pins>, + <&tdma_din0_pins>, <&tdma_dout0_x15_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tdmif_b { + pinctrl-0 = <&tdmb_sclk_pins>, <&tdmb_fs_pins>, + <&tdmb_din3_pins>, <&mclk_b_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tdmif_c { + pinctrl-0 = <&tdmc_sclk_pins>, <&tdmc_fs_pins>, + <&tdmc_din1_pins>, <&tdmc_dout2_pins>, + <&mclk_c_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmin_c { + status = "okay"; +}; + +&tdmin_lb { + status = "okay"; +}; + +&tdmout_c { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>; + pinctrl-names = "default"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index c518130e5ce7..df017dbd2e57 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -3,13 +3,14 @@ * Copyright (c) 2017 Amlogic, Inc. All rights reserved. */ -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/axg-aoclkc.h> #include <dt-bindings/clock/axg-audio-clkc.h> #include <dt-bindings/clock/axg-clkc.h> -#include <dt-bindings/clock/axg-aoclkc.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/meson-axg-gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> #include <dt-bindings/reset/amlogic,meson-axg-reset.h> / { @@ -19,22 +20,53 @@ #address-cells = <2>; #size-cells = <2>; - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; + tdmif_a: audio-controller@0 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_A"; + clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, + <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; - /* 16 MiB reserved for Hardware ROM Firmware */ - hwrom_reserved: hwrom@0 { - reg = <0x0 0x0 0x0 0x1000000>; - no-map; - }; + tdmif_b: audio-controller@1 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_B"; + clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; - /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved: secmon@5000000 { - reg = <0x0 0x05000000 0x0 0x300000>; - no-map; - }; + tdmif_c: audio-controller@2 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_C"; + clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, + <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + ao_alt_xtal: ao_alt_xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <32000000>; + clock-output-names = "ao_alt_xtal"; + #clock-cells = <0>; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; cpus { @@ -78,77 +110,27 @@ }; }; - arm-pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - psci { compatible = "arm,psci-1.0"; method = "smc"; }; - tdmif_a: audio-controller@0 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_A"; - clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, - <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_b: audio-controller@1 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_B"; - clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, - <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_c: audio-controller@2 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_C"; - clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, - <&clkc_audio AUD_CLKID_MST_C_SCLK>, - <&clkc_audio AUD_CLKID_MST_C_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; - }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; - xtal: xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xtal"; - #clock-cells = <0>; - }; + /* 16 MiB reserved for Hardware ROM Firmware */ + hwrom_reserved: hwrom@0 { + reg = <0x0 0x0 0x0 0x1000000>; + no-map; + }; - ao_alt_xtal: ao_alt_xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <32000000>; - clock-output-names = "ao_alt_xtal"; - #clock-cells = <0>; + /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x300000>; + no-map; + }; }; soc { @@ -157,310 +139,10 @@ #size-cells = <2>; ranges; - apb: apb@ffe00000 { - compatible = "simple-bus"; - reg = <0x0 0xffe00000 0x0 0x200000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>; - - sd_emmc_b: sd@5000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0x5000 0x0 0x800>; - interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_B>, - <&clkc CLKID_SD_EMMC_B_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_B>; - }; - - sd_emmc_c: mmc@7000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0x7000 0x0 0x800>; - interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_C>, - <&clkc CLKID_SD_EMMC_C_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_C>; - }; - }; - - audio: bus@ff642000 { - compatible = "simple-bus"; - reg = <0x0 0xff642000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>; - - clkc_audio: clock-controller@0 { - compatible = "amlogic,axg-audio-clkc"; - reg = <0x0 0x0 0x0 0xb4>; - #clock-cells = <1>; - - clocks = <&clkc CLKID_AUDIO>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL3>, - <&clkc CLKID_HIFI_PLL>, - <&clkc CLKID_FCLK_DIV3>, - <&clkc CLKID_FCLK_DIV4>, - <&clkc CLKID_GP0_PLL>; - clock-names = "pclk", - "mst_in0", - "mst_in1", - "mst_in2", - "mst_in3", - "mst_in4", - "mst_in5", - "mst_in6", - "mst_in7"; - - resets = <&reset RESET_AUDIO>; - }; - - arb: reset-controller@280 { - compatible = "amlogic,meson-axg-audio-arb"; - reg = <0x0 0x280 0x0 0x4>; - #reset-cells = <1>; - clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; - }; - - tdmin_a: audio-controller@300 { - compatible = "amlogic,axg-tdmin"; - reg = <0x0 0x300 0x0 0x40>; - sound-name-prefix = "TDMIN_A"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_b: audio-controller@340 { - compatible = "amlogic,axg-tdmin"; - reg = <0x0 0x340 0x0 0x40>; - sound-name-prefix = "TDMIN_B"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_c: audio-controller@380 { - compatible = "amlogic,axg-tdmin"; - reg = <0x0 0x380 0x0 0x40>; - sound-name-prefix = "TDMIN_C"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_lb: audio-controller@3c0 { - compatible = "amlogic,axg-tdmin"; - reg = <0x0 0x3c0 0x0 0x40>; - sound-name-prefix = "TDMIN_LB"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifout: audio-controller@480 { - compatible = "amlogic,axg-spdifout"; - reg = <0x0 0x480 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, - <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; - clock-names = "pclk", "mclk"; - status = "disabled"; - }; - - tdmout_a: audio-controller@500 { - compatible = "amlogic,axg-tdmout"; - reg = <0x0 0x500 0x0 0x40>; - sound-name-prefix = "TDMOUT_A"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_b: audio-controller@540 { - compatible = "amlogic,axg-tdmout"; - reg = <0x0 0x540 0x0 0x40>; - sound-name-prefix = "TDMOUT_B"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_c: audio-controller@580 { - compatible = "amlogic,axg-tdmout"; - reg = <0x0 0x580 0x0 0x40>; - sound-name-prefix = "TDMOUT_C"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - }; - - cbus: bus@ffd00000 { - compatible = "simple-bus"; - reg = <0x0 0xffd00000 0x0 0x25000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; - - gpio_intc: interrupt-controller@f080 { - compatible = "amlogic,meson-gpio-intc"; - reg = <0x0 0xf080 0x0 0x10>; - interrupt-controller; - #interrupt-cells = <2>; - amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; - status = "disabled"; - }; - - pwm_ab: pwm@1b000 { - compatible = "amlogic,meson-axg-ee-pwm"; - reg = <0x0 0x1b000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm_cd: pwm@1a000 { - compatible = "amlogic,meson-axg-ee-pwm"; - reg = <0x0 0x1a000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - reset: reset-controller@1004 { - compatible = "amlogic,meson-axg-reset"; - reg = <0x0 0x01004 0x0 0x9c>; - #reset-cells = <1>; - }; - - spicc0: spi@13000 { - compatible = "amlogic,meson-axg-spicc"; - reg = <0x0 0x13000 0x0 0x3c>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_SPICC0>; - clock-names = "core"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spicc1: spi@15000 { - compatible = "amlogic,meson-axg-spicc"; - reg = <0x0 0x15000 0x0 0x3c>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_SPICC1>; - clock-names = "core"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c0: i2c@1f000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x1f000 0x0 0x20>; - interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c1: i2c@1e000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x1e000 0x0 0x20>; - interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@1d000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x1d000 0x0 0x20>; - interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c3: i2c@1c000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x1c000 0x0 0x20>; - interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart_A: serial@24000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x24000 0x0 0x18>; - interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - }; - - uart_B: serial@23000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x23000 0x0 0x18>; - interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - }; - }; - ethmac: ethernet@ff3f0000 { - compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac"; + compatible = "amlogic,meson-axg-dwmac", "snps,dwmac"; reg = <0x0 0xff3f0000 0x0 0x10000 - 0x0 0xff634540 0x0 0x8>; + 0x0 0xff634540 0x0 0x8>; interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>; interrupt-names = "macirq"; clocks = <&clkc CLKID_ETH>, @@ -470,54 +152,26 @@ status = "disabled"; }; - gic: interrupt-controller@ffc01000 { - compatible = "arm,gic-400"; - reg = <0x0 0xffc01000 0 0x1000>, - <0x0 0xffc02000 0 0x2000>, - <0x0 0xffc04000 0 0x2000>, - <0x0 0xffc06000 0 0x2000>; - interrupt-controller; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; - #interrupt-cells = <3>; - #address-cells = <0>; - }; - - hiubus: bus@ff63c000 { - compatible = "simple-bus"; - reg = <0x0 0xff63c000 0x0 0x1c00>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; - - sysctrl: system-controller@0 { - compatible = "amlogic,meson-axg-hhi-sysctrl", "syscon", "simple-mfd"; - reg = <0 0 0 0x400>; - - clkc: clock-controller { - compatible = "amlogic,axg-clkc"; - #clock-cells = <1>; - }; - }; - }; - - mailbox: mailbox@ff63dc00 { - compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; - reg = <0 0xff63dc00 0 0x400>; - interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>; - #mbox-cells = <1>; + pdm: audio-controller@ff632000 { + compatible = "amlogic,axg-pdm"; + reg = <0x0 0xff632000 0x0 0x34>; + #sound-dai-cells = <0>; + sound-name-prefix = "PDM"; + clocks = <&clkc_audio AUD_CLKID_PDM>, + <&clkc_audio AUD_CLKID_PDM_DCLK>, + <&clkc_audio AUD_CLKID_PDM_SYSCLK>; + clock-names = "pclk", "dclk", "sysclk"; + status = "disabled"; }; - periphs: periphs@ff634000 { + periphs: bus@ff634000 { compatible = "simple-bus"; reg = <0x0 0xff634000 0x0 0x2000>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>; - hwrng: rng { + hwrng: rng@18 { compatible = "amlogic,meson-rng"; reg = <0x0 0x18 0x0 0x4>; clocks = <&clkc CLKID_RNG0>; @@ -532,28 +186,92 @@ gpio: bank@480 { reg = <0x0 0x00480 0x0 0x40>, - <0x0 0x004e8 0x0 0x14>, - <0x0 0x00520 0x0 0x14>, - <0x0 0x00430 0x0 0x3c>; + <0x0 0x004e8 0x0 0x14>, + <0x0 0x00520 0x0 0x14>, + <0x0 0x00430 0x0 0x3c>; reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pinctrl_periphs 0 0 86>; }; + i2c0_pins: i2c0 { + mux { + groups = "i2c0_sck", + "i2c0_sda"; + function = "i2c0"; + }; + }; + + i2c1_x_pins: i2c1_x { + mux { + groups = "i2c1_sck_x", + "i2c1_sda_x"; + function = "i2c1"; + }; + }; + + i2c1_z_pins: i2c1_z { + mux { + groups = "i2c1_sck_z", + "i2c1_sda_z"; + function = "i2c1"; + }; + }; + + i2c2_a_pins: i2c2_a { + mux { + groups = "i2c2_sck_a", + "i2c2_sda_a"; + function = "i2c2"; + }; + }; + + i2c2_x_pins: i2c2_x { + mux { + groups = "i2c2_sck_x", + "i2c2_sda_x"; + function = "i2c2"; + }; + }; + + i2c3_a6_pins: i2c3_a6 { + mux { + groups = "i2c3_sda_a6", + "i2c3_sck_a7"; + function = "i2c3"; + }; + }; + + i2c3_a12_pins: i2c3_a12 { + mux { + groups = "i2c3_sda_a12", + "i2c3_sck_a13"; + function = "i2c3"; + }; + }; + + i2c3_a19_pins: i2c3_a19 { + mux { + groups = "i2c3_sda_a19", + "i2c3_sck_a20"; + function = "i2c3"; + }; + }; + emmc_pins: emmc { mux { groups = "emmc_nand_d0", - "emmc_nand_d1", - "emmc_nand_d2", - "emmc_nand_d3", - "emmc_nand_d4", - "emmc_nand_d5", - "emmc_nand_d6", - "emmc_nand_d7", - "emmc_clk", - "emmc_cmd", - "emmc_ds"; + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "emmc_clk", + "emmc_cmd", + "emmc_ds"; function = "emmc"; }; }; @@ -569,40 +287,57 @@ }; }; - sdio_pins: sdio { + eth_rgmii_x_pins: eth-x-rgmii { mux { - groups = "sdio_d0", - "sdio_d1", - "sdio_d2", - "sdio_d3", - "sdio_cmd", - "sdio_clk"; - function = "sdio"; + groups = "eth_mdio_x", + "eth_mdc_x", + "eth_rgmii_rx_clk_x", + "eth_rx_dv_x", + "eth_rxd0_x", + "eth_rxd1_x", + "eth_rxd2_rgmii", + "eth_rxd3_rgmii", + "eth_rgmii_tx_clk", + "eth_txen_x", + "eth_txd0_x", + "eth_txd1_x", + "eth_txd2_rgmii", + "eth_txd3_rgmii"; + function = "eth"; }; }; - sdio_clk_gate_pins: sdio_clk_gate { + eth_rgmii_y_pins: eth-y-rgmii { mux { - groups = "GPIOX_4"; - function = "gpio_periphs"; - }; - cfg-pull-down { - pins = "GPIOX_4"; - bias-pull-down; + groups = "eth_mdio_y", + "eth_mdc_y", + "eth_rgmii_rx_clk_y", + "eth_rx_dv_y", + "eth_rxd0_y", + "eth_rxd1_y", + "eth_rxd2_rgmii", + "eth_rxd3_rgmii", + "eth_rgmii_tx_clk", + "eth_txen_y", + "eth_txd0_y", + "eth_txd1_y", + "eth_txd2_rgmii", + "eth_txd3_rgmii"; + function = "eth"; }; }; eth_rmii_x_pins: eth-x-rmii { mux { groups = "eth_mdio_x", - "eth_mdc_x", - "eth_rgmii_rx_clk_x", - "eth_rx_dv_x", - "eth_rxd0_x", - "eth_rxd1_x", - "eth_txen_x", - "eth_txd0_x", - "eth_txd1_x"; + "eth_mdc_x", + "eth_rgmii_rx_clk_x", + "eth_rx_dv_x", + "eth_rxd0_x", + "eth_rxd1_x", + "eth_txen_x", + "eth_txd0_x", + "eth_txd1_x"; function = "eth"; }; }; @@ -610,55 +345,29 @@ eth_rmii_y_pins: eth-y-rmii { mux { groups = "eth_mdio_y", - "eth_mdc_y", - "eth_rgmii_rx_clk_y", - "eth_rx_dv_y", - "eth_rxd0_y", - "eth_rxd1_y", - "eth_txen_y", - "eth_txd0_y", - "eth_txd1_y"; + "eth_mdc_y", + "eth_rgmii_rx_clk_y", + "eth_rx_dv_y", + "eth_rxd0_y", + "eth_rxd1_y", + "eth_txen_y", + "eth_txd0_y", + "eth_txd1_y"; function = "eth"; }; }; - eth_rgmii_x_pins: eth-x-rgmii { + mclk_b_pins: mclk_b { mux { - groups = "eth_mdio_x", - "eth_mdc_x", - "eth_rgmii_rx_clk_x", - "eth_rx_dv_x", - "eth_rxd0_x", - "eth_rxd1_x", - "eth_rxd2_rgmii", - "eth_rxd3_rgmii", - "eth_rgmii_tx_clk", - "eth_txen_x", - "eth_txd0_x", - "eth_txd1_x", - "eth_txd2_rgmii", - "eth_txd3_rgmii"; - function = "eth"; + groups = "mclk_b"; + function = "mclk_b"; }; }; - eth_rgmii_y_pins: eth-y-rgmii { + mclk_c_pins: mclk_c { mux { - groups = "eth_mdio_y", - "eth_mdc_y", - "eth_rgmii_rx_clk_y", - "eth_rx_dv_y", - "eth_rxd0_y", - "eth_rxd1_y", - "eth_rxd2_rgmii", - "eth_rxd3_rgmii", - "eth_rgmii_tx_clk", - "eth_txen_y", - "eth_txd0_y", - "eth_txd1_y", - "eth_txd2_rgmii", - "eth_txd3_rgmii"; - function = "eth"; + groups = "mclk_c"; + function = "mclk_c"; }; }; @@ -788,6 +497,29 @@ }; }; + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_cmd", + "sdio_clk"; + function = "sdio"; + }; + }; + + sdio_clk_gate_pins: sdio_clk_gate { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "GPIOX_4"; + bias-pull-down; + }; + }; + spdif_in_z_pins: spdif_in_z { mux { groups = "spdif_in_z"; @@ -823,13 +555,6 @@ }; }; - spdif_out_z_pins: spdif_out_z { - mux { - groups = "spdif_out_z"; - function = "spdif_out"; - }; - }; - spdif_out_a1_pins: spdif_out_a1 { mux { groups = "spdif_out_a1"; @@ -858,11 +583,18 @@ }; }; + spdif_out_z_pins: spdif_out_z { + mux { + groups = "spdif_out_z"; + function = "spdif_out"; + }; + }; + spi0_pins: spi0 { mux { groups = "spi0_miso", - "spi0_mosi", - "spi0_clk"; + "spi0_mosi", + "spi0_clk"; function = "spi0"; }; }; @@ -888,12 +620,11 @@ }; }; - spi1_a_pins: spi1_a { mux { groups = "spi1_miso_a", - "spi1_mosi_a", - "spi1_clk_a"; + "spi1_mosi_a", + "spi1_clk_a"; function = "spi1"; }; }; @@ -915,8 +646,8 @@ spi1_x_pins: spi1_x { mux { groups = "spi1_miso_x", - "spi1_mosi_x", - "spi1_clk_x"; + "spi1_mosi_x", + "spi1_clk_x"; function = "spi1"; }; }; @@ -928,145 +659,52 @@ }; }; - i2c0_pins: i2c0 { - mux { - groups = "i2c0_sck", - "i2c0_sda"; - function = "i2c0"; - }; - }; - - i2c1_z_pins: i2c1_z { - mux { - groups = "i2c1_sck_z", - "i2c1_sda_z"; - function = "i2c1"; - }; - }; - - i2c1_x_pins: i2c1_x { - mux { - groups = "i2c1_sck_x", - "i2c1_sda_x"; - function = "i2c1"; - }; - }; - - i2c2_x_pins: i2c2_x { - mux { - groups = "i2c2_sck_x", - "i2c2_sda_x"; - function = "i2c2"; - }; - }; - - i2c2_a_pins: i2c2_a { - mux { - groups = "i2c2_sck_a", - "i2c2_sda_a"; - function = "i2c2"; - }; - }; - - i2c3_a6_pins: i2c3_a6 { - mux { - groups = "i2c3_sda_a6", - "i2c3_sck_a7"; - function = "i2c3"; - }; - }; - - i2c3_a12_pins: i2c3_a12 { - mux { - groups = "i2c3_sda_a12", - "i2c3_sck_a13"; - function = "i2c3"; - }; - }; - - i2c3_a19_pins: i2c3_a19 { - mux { - groups = "i2c3_sda_a19", - "i2c3_sck_a20"; - function = "i2c3"; - }; - }; - - uart_a_pins: uart_a { - mux { - groups = "uart_tx_a", - "uart_rx_a"; - function = "uart_a"; - }; - }; - - uart_a_cts_rts_pins: uart_a_cts_rts { - mux { - groups = "uart_cts_a", - "uart_rts_a"; - function = "uart_a"; - }; - }; - - uart_b_x_pins: uart_b_x { - mux { - groups = "uart_tx_b_x", - "uart_rx_b_x"; - function = "uart_b"; - }; - }; - - uart_b_x_cts_rts_pins: uart_b_x_cts_rts { + tdma_din0_pins: tdma_din0 { mux { - groups = "uart_cts_b_x", - "uart_rts_b_x"; - function = "uart_b"; + groups = "tdma_din0"; + function = "tdma"; }; }; - uart_b_z_pins: uart_b_z { + tdma_dout0_x14_pins: tdma_dout0_x14 { mux { - groups = "uart_tx_b_z", - "uart_rx_b_z"; - function = "uart_b"; + groups = "tdma_dout0_x14"; + function = "tdma"; }; }; - uart_b_z_cts_rts_pins: uart_b_z_cts_rts { + tdma_dout0_x15_pins: tdma_dout0_x15 { mux { - groups = "uart_cts_b_z", - "uart_rts_b_z"; - function = "uart_b"; + groups = "tdma_dout0_x15"; + function = "tdma"; }; }; - uart_ao_b_z_pins: uart_ao_b_z { + tdma_dout1_pins: tdma_dout1 { mux { - groups = "uart_ao_tx_b_z", - "uart_ao_rx_b_z"; - function = "uart_ao_b_z"; + groups = "tdma_dout1"; + function = "tdma"; }; }; - uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts { + tdma_din1_pins: tdma_din1 { mux { - groups = "uart_ao_cts_b_z", - "uart_ao_rts_b_z"; - function = "uart_ao_b_z"; + groups = "tdma_din1"; + function = "tdma"; }; }; - mclk_b_pins: mclk_b { + tdma_fs_pins: tdma_fs { mux { - groups = "mclk_b"; - function = "mclk_b"; + groups = "tdma_fs"; + function = "tdma"; }; }; - mclk_c_pins: mclk_c { + tdma_fs_slv_pins: tdma_fs_slv { mux { - groups = "mclk_c"; - function = "mclk_c"; + groups = "tdma_fs_slv"; + function = "tdma"; }; }; @@ -1084,65 +722,58 @@ }; }; - tdma_fs_pins: tdma_fs { - mux { - groups = "tdma_fs"; - function = "tdma"; - }; - }; - - tdma_fs_slv_pins: tdma_fs_slv { + tdmb_din0_pins: tdmb_din0 { mux { - groups = "tdma_fs_slv"; - function = "tdma"; + groups = "tdmb_din0"; + function = "tdmb"; }; }; - tdma_din0_pins: tdma_din0 { + tdmb_din1_pins: tdmb_din1 { mux { - groups = "tdma_din0"; - function = "tdma"; + groups = "tdmb_din1"; + function = "tdmb"; }; }; - tdma_dout0_x14_pins: tdma_dout0_x14 { + tdmb_din2_pins: tdmb_din2 { mux { - groups = "tdma_dout0_x14"; - function = "tdma"; + groups = "tdmb_din2"; + function = "tdmb"; }; }; - tdma_dout0_x15_pins: tdma_dout0_x15 { + tdmb_din3_pins: tdmb_din3 { mux { - groups = "tdma_dout0_x15"; - function = "tdma"; + groups = "tdmb_din3"; + function = "tdmb"; }; }; - tdma_dout1_pins: tdma_dout1 { + tdmb_dout0_pins: tdmb_dout0 { mux { - groups = "tdma_dout1"; - function = "tdma"; + groups = "tdmb_dout0"; + function = "tdmb"; }; }; - tdma_din1_pins: tdma_din1 { + tdmb_dout1_pins: tdmb_dout1 { mux { - groups = "tdma_din1"; - function = "tdma"; + groups = "tdmb_dout1"; + function = "tdmb"; }; }; - tdmb_sclk_pins: tdmb_sclk { + tdmb_dout2_pins: tdmb_dout2 { mux { - groups = "tdmb_sclk"; + groups = "tdmb_dout2"; function = "tdmb"; }; }; - tdmb_sclk_slv_pins: tdmb_sclk_slv { + tdmb_dout3_pins: tdmb_dout3 { mux { - groups = "tdmb_sclk_slv"; + groups = "tdmb_dout3"; function = "tdmb"; }; }; @@ -1161,163 +792,412 @@ }; }; - tdmb_din0_pins: tdmb_din0 { + tdmb_sclk_pins: tdmb_sclk { mux { - groups = "tdmb_din0"; + groups = "tdmb_sclk"; function = "tdmb"; }; }; - tdmb_dout0_pins: tdmb_dout0 { + tdmb_sclk_slv_pins: tdmb_sclk_slv { mux { - groups = "tdmb_dout0"; + groups = "tdmb_sclk_slv"; function = "tdmb"; }; }; - tdmb_din1_pins: tdmb_din1 { + tdmc_fs_pins: tdmc_fs { mux { - groups = "tdmb_din1"; - function = "tdmb"; + groups = "tdmc_fs"; + function = "tdmc"; }; }; - tdmb_dout1_pins: tdmb_dout1 { + tdmc_fs_slv_pins: tdmc_fs_slv { mux { - groups = "tdmb_dout1"; - function = "tdmb"; + groups = "tdmc_fs_slv"; + function = "tdmc"; }; }; - tdmb_din2_pins: tdmb_din2 { + tdmc_sclk_pins: tdmc_sclk { mux { - groups = "tdmb_din2"; - function = "tdmb"; + groups = "tdmc_sclk"; + function = "tdmc"; }; }; - tdmb_dout2_pins: tdmb_dout2 { + tdmc_sclk_slv_pins: tdmc_sclk_slv { mux { - groups = "tdmb_dout2"; - function = "tdmb"; + groups = "tdmc_sclk_slv"; + function = "tdmc"; }; }; - tdmb_din3_pins: tdmb_din3 { + tdmc_din0_pins: tdmc_din0 { mux { - groups = "tdmb_din3"; - function = "tdmb"; + groups = "tdmc_din0"; + function = "tdmc"; }; }; - tdmb_dout3_pins: tdmb_dout3 { + tdmc_din1_pins: tdmc_din1 { mux { - groups = "tdmb_dout3"; - function = "tdmb"; + groups = "tdmc_din1"; + function = "tdmc"; }; }; - tdmc_sclk_pins: tdmc_sclk { + tdmc_din2_pins: tdmc_din2 { mux { - groups = "tdmc_sclk"; + groups = "tdmc_din2"; function = "tdmc"; }; }; - tdmc_sclk_slv_pins: tdmc_sclk_slv { + tdmc_din3_pins: tdmc_din3 { mux { - groups = "tdmc_sclk_slv"; + groups = "tdmc_din3"; function = "tdmc"; }; }; - tdmc_fs_pins: tdmc_fs { + tdmc_dout0_pins: tdmc_dout0 { mux { - groups = "tdmc_fs"; + groups = "tdmc_dout0"; function = "tdmc"; }; }; - tdmc_fs_slv_pins: tdmc_fs_slv { + tdmc_dout1_pins: tdmc_dout1 { mux { - groups = "tdmc_fs_slv"; + groups = "tdmc_dout1"; function = "tdmc"; }; }; - tdmc_din0_pins: tdmc_din0 { + tdmc_dout2_pins: tdmc_dout2 { mux { - groups = "tdmc_din0"; + groups = "tdmc_dout2"; function = "tdmc"; }; }; - tdmc_dout0_pins: tdmc_dout0 { + tdmc_dout3_pins: tdmc_dout3 { mux { - groups = "tdmc_dout0"; + groups = "tdmc_dout3"; function = "tdmc"; }; }; - tdmc_din1_pins: tdmc_din1 { + uart_a_pins: uart_a { mux { - groups = "tdmc_din1"; - function = "tdmc"; + groups = "uart_tx_a", + "uart_rx_a"; + function = "uart_a"; }; }; - tdmc_dout1_pins: tdmc_dout1 { + uart_a_cts_rts_pins: uart_a_cts_rts { mux { - groups = "tdmc_dout1"; - function = "tdmc"; + groups = "uart_cts_a", + "uart_rts_a"; + function = "uart_a"; }; }; - tdmc_din2_pins: tdmc_din2 { + uart_b_x_pins: uart_b_x { mux { - groups = "tdmc_din2"; - function = "tdmc"; + groups = "uart_tx_b_x", + "uart_rx_b_x"; + function = "uart_b"; }; }; - tdmc_dout2_pins: tdmc_dout2 { + uart_b_x_cts_rts_pins: uart_b_x_cts_rts { mux { - groups = "tdmc_dout2"; - function = "tdmc"; + groups = "uart_cts_b_x", + "uart_rts_b_x"; + function = "uart_b"; }; }; - tdmc_din3_pins: tdmc_din3 { + uart_b_z_pins: uart_b_z { mux { - groups = "tdmc_din3"; - function = "tdmc"; + groups = "uart_tx_b_z", + "uart_rx_b_z"; + function = "uart_b"; }; }; - tdmc_dout3_pins: tdmc_dout3 { + uart_b_z_cts_rts_pins: uart_b_z_cts_rts { mux { - groups = "tdmc_dout3"; - function = "tdmc"; + groups = "uart_cts_b_z", + "uart_rts_b_z"; + function = "uart_b"; + }; + }; + + uart_ao_b_z_pins: uart_ao_b_z { + mux { + groups = "uart_ao_tx_b_z", + "uart_ao_rx_b_z"; + function = "uart_ao_b_z"; + }; + }; + + uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts { + mux { + groups = "uart_ao_cts_b_z", + "uart_ao_rts_b_z"; + function = "uart_ao_b_z"; }; }; }; }; - sram: sram@fffc0000 { - compatible = "amlogic,meson-axg-sram", "mmio-sram"; - reg = <0x0 0xfffc0000 0x0 0x20000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0xfffc0000 0x20000>; + hiubus: bus@ff63c000 { + compatible = "simple-bus"; + reg = <0x0 0xff63c000 0x0 0x1c00>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; - cpu_scp_lpri: scp-shmem@0 { - compatible = "amlogic,meson-axg-scp-shmem"; - reg = <0x13000 0x400>; + sysctrl: system-controller@0 { + compatible = "amlogic,meson-axg-hhi-sysctrl", + "simple-mfd", "syscon"; + reg = <0 0 0 0x400>; + + clkc: clock-controller { + compatible = "amlogic,axg-clkc"; + #clock-cells = <1>; + }; }; + }; - cpu_scp_hpri: scp-shmem@200 { - compatible = "amlogic,meson-axg-scp-shmem"; - reg = <0x13400 0x400>; + mailbox: mailbox@ff63dc00 { + compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; + reg = <0 0xff63dc00 0 0x400>; + interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>; + #mbox-cells = <1>; + }; + + audio: bus@ff642000 { + compatible = "simple-bus"; + reg = <0x0 0xff642000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>; + + clkc_audio: clock-controller@0 { + compatible = "amlogic,axg-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + + resets = <&reset RESET_AUDIO>; + }; + + toddr_a: audio-controller@100 { + compatible = "amlogic,axg-toddr"; + reg = <0x0 0x100 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_A"; + interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_A>; + resets = <&arb AXG_ARB_TODDR_A>; + status = "disabled"; + }; + + toddr_b: audio-controller@140 { + compatible = "amlogic,axg-toddr"; + reg = <0x0 0x140 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_B"; + interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_B>; + resets = <&arb AXG_ARB_TODDR_B>; + status = "disabled"; + }; + + toddr_c: audio-controller@180 { + compatible = "amlogic,axg-toddr"; + reg = <0x0 0x180 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_C"; + interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_C>; + resets = <&arb AXG_ARB_TODDR_C>; + status = "disabled"; + }; + + frddr_a: audio-controller@1c0 { + compatible = "amlogic,axg-frddr"; + reg = <0x0 0x1c0 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_A"; + interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; + resets = <&arb AXG_ARB_FRDDR_A>; + status = "disabled"; + }; + + frddr_b: audio-controller@200 { + compatible = "amlogic,axg-frddr"; + reg = <0x0 0x200 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_B"; + interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; + resets = <&arb AXG_ARB_FRDDR_B>; + status = "disabled"; + }; + + frddr_c: audio-controller@240 { + compatible = "amlogic,axg-frddr"; + reg = <0x0 0x240 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_C"; + interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; + resets = <&arb AXG_ARB_FRDDR_C>; + status = "disabled"; + }; + + arb: reset-controller@280 { + compatible = "amlogic,meson-axg-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + + tdmin_a: audio-controller@300 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x300 0x0 0x40>; + sound-name-prefix = "TDMIN_A"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_b: audio-controller@340 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x340 0x0 0x40>; + sound-name-prefix = "TDMIN_B"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_c: audio-controller@380 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x380 0x0 0x40>; + sound-name-prefix = "TDMIN_C"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_lb: audio-controller@3c0 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x3c0 0x0 0x40>; + sound-name-prefix = "TDMIN_LB"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifout: audio-controller@480 { + compatible = "amlogic,axg-spdifout"; + reg = <0x0 0x480 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; + status = "disabled"; + }; + + tdmout_a: audio-controller@500 { + compatible = "amlogic,axg-tdmout"; + reg = <0x0 0x500 0x0 0x40>; + sound-name-prefix = "TDMOUT_A"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_b: audio-controller@540 { + compatible = "amlogic,axg-tdmout"; + reg = <0x0 0x540 0x0 0x40>; + sound-name-prefix = "TDMOUT_B"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_c: audio-controller@580 { + compatible = "amlogic,axg-tdmout"; + reg = <0x0 0x580 0x0 0x40>; + sound-name-prefix = "TDMOUT_C"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; }; }; @@ -1329,7 +1209,7 @@ ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; sysctrl_AO: sys-ctrl@0 { - compatible = "amlogic,meson-axg-ao-sysctrl", "syscon", "simple-mfd"; + compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon"; reg = <0x0 0x0 0x0 0x100>; clkc_AO: clock-controller { @@ -1347,8 +1227,8 @@ gpio_ao: bank@14 { reg = <0x0 0x00014 0x0 0x8>, - <0x0 0x0002c 0x0 0x4>, - <0x0 0x00024 0x0 0x8>; + <0x0 0x0002c 0x0 0x4>, + <0x0 0x00024 0x0 0x8>; reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; @@ -1407,7 +1287,7 @@ uart_ao_a_pins: uart_ao_a { mux { groups = "uart_ao_tx_a", - "uart_ao_rx_a"; + "uart_ao_rx_a"; function = "uart_ao_a"; }; }; @@ -1415,7 +1295,7 @@ uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts { mux { groups = "uart_ao_cts_a", - "uart_ao_rts_a"; + "uart_ao_rts_a"; function = "uart_ao_a"; }; }; @@ -1423,7 +1303,7 @@ uart_ao_b_pins: uart_ao_b { mux { groups = "uart_ao_tx_b", - "uart_ao_rx_b"; + "uart_ao_rx_b"; function = "uart_ao_b"; }; }; @@ -1431,7 +1311,7 @@ uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts { mux { groups = "uart_ao_cts_b", - "uart_ao_rts_b"; + "uart_ao_rts_b"; function = "uart_ao_b"; }; }; @@ -1443,13 +1323,6 @@ amlogic,has-chip-id; }; - pwm_AO_ab: pwm@7000 { - compatible = "amlogic,meson-axg-ao-pwm"; - reg = <0x0 0x07000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - pwm_AO_cd: pwm@2000 { compatible = "amlogic,meson-axg-ao-pwm"; reg = <0x0 0x02000 0x0 0x20>; @@ -1457,16 +1330,6 @@ status = "disabled"; }; - i2c_AO: i2c@5000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x05000 0x0 0x20>; - interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_AO_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - uart_AO: serial@3000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x3000 0x0 0x18>; @@ -1485,6 +1348,23 @@ status = "disabled"; }; + i2c_AO: i2c@5000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x05000 0x0 0x20>; + interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_AO_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm_AO_ab: pwm@7000 { + compatible = "amlogic,meson-axg-ao-pwm"; + reg = <0x0 0x07000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + ir: ir@8000 { compatible = "amlogic,meson-gxbb-ir"; reg = <0x0 0x8000 0x0 0x20>; @@ -1499,12 +1379,211 @@ #io-channel-cells = <1>; interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>, - <&clkc_AO CLKID_AO_SAR_ADC>, - <&clkc_AO CLKID_AO_SAR_ADC_CLK>, - <&clkc_AO CLKID_AO_SAR_ADC_SEL>; + <&clkc_AO CLKID_AO_SAR_ADC>, + <&clkc_AO CLKID_AO_SAR_ADC_CLK>, + <&clkc_AO CLKID_AO_SAR_ADC_SEL>; clock-names = "clkin", "core", "adc_clk", "adc_sel"; status = "disabled"; }; }; + + gic: interrupt-controller@ffc01000 { + compatible = "arm,gic-400"; + reg = <0x0 0xffc01000 0 0x1000>, + <0x0 0xffc02000 0 0x2000>, + <0x0 0xffc04000 0 0x2000>, + <0x0 0xffc06000 0 0x2000>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + + cbus: bus@ffd00000 { + compatible = "simple-bus"; + reg = <0x0 0xffd00000 0x0 0x25000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; + + reset: reset-controller@1004 { + compatible = "amlogic,meson-axg-reset"; + reg = <0x0 0x01004 0x0 0x9c>; + #reset-cells = <1>; + }; + + gpio_intc: interrupt-controller@f080 { + compatible = "amlogic,meson-gpio-intc"; + reg = <0x0 0xf080 0x0 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + status = "disabled"; + }; + + pwm_ab: pwm@1b000 { + compatible = "amlogic,meson-axg-ee-pwm"; + reg = <0x0 0x1b000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@1a000 { + compatible = "amlogic,meson-axg-ee-pwm"; + reg = <0x0 0x1a000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + spicc0: spi@13000 { + compatible = "amlogic,meson-axg-spicc"; + reg = <0x0 0x13000 0x0 0x3c>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_SPICC0>; + clock-names = "core"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spicc1: spi@15000 { + compatible = "amlogic,meson-axg-spicc"; + reg = <0x0 0x15000 0x0 0x3c>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_SPICC1>; + clock-names = "core"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@1c000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x1c000 0x0 0x20>; + interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@1d000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x1d000 0x0 0x20>; + interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@1e000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x1e000 0x0 0x20>; + interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@1f000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x1f000 0x0 0x20>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart_B: serial@23000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x23000 0x0 0x18>; + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + }; + + uart_A: serial@24000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x24000 0x0 0x18>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + }; + }; + + apb: bus@ffe00000 { + compatible = "simple-bus"; + reg = <0x0 0xffe00000 0x0 0x200000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>; + + sd_emmc_b: sd@5000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x5000 0x0 0x800>; + interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_B>, + <&clkc CLKID_SD_EMMC_B_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; + }; + + sd_emmc_c: mmc@7000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x7000 0x0 0x800>; + interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_C>, + <&clkc CLKID_SD_EMMC_C_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; + }; + }; + + sram: sram@fffc0000 { + compatible = "amlogic,meson-axg-sram", "mmio-sram"; + reg = <0x0 0xfffc0000 0x0 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0xfffc0000 0x20000>; + + cpu_scp_lpri: scp-shmem@0 { + compatible = "amlogic,meson-axg-scp-shmem"; + reg = <0x13000 0x400>; + }; + + cpu_scp_hpri: scp-shmem@200 { + compatible = "amlogic,meson-axg-scp-shmem"; + reg = <0x13400 0x400>; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts new file mode 100644 index 000000000000..c44dbdddf2cf --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Amlogic, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "meson-g12a.dtsi" + +/ { + compatible = "amlogic,u200", "amlogic,g12a"; + model = "Amlogic Meson G12A U200 Development Board"; + + aliases { + serial0 = &uart_AO; + }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; +}; + +&uart_AO { + status = "okay"; +}; + diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi new file mode 100644 index 000000000000..3b82a975c663 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Amlogic, Inc. All rights reserved. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "amlogic,g12a"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <0x2>; + #size-cells = <0x0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 3 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x300000>; + no-map; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + periphs: periphs@ff634000 { + compatible = "simple-bus"; + reg = <0x0 0xff634000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>; + }; + + hiubus: bus@ff63c000 { + compatible = "simple-bus"; + reg = <0x0 0xff63c000 0x0 0x1c00>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; + }; + + aobus: bus@ff800000 { + compatible = "simple-bus"; + reg = <0x0 0xff800000 0x0 0x100000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; + + uart_AO: serial@3000 { + compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; + reg = <0x0 0x3000 0x0 0x18>; + interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_AO_B: serial@4000 { + compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; + reg = <0x0 0x4000 0x0 0x18>; + interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + }; + + gic: interrupt-controller@ffc01000 { + compatible = "arm,gic-400"; + reg = <0x0 0xffc01000 0 0x1000>, + <0x0 0xffc02000 0 0x2000>, + <0x0 0xffc04000 0 0x2000>, + <0x0 0xffc06000 0 0x2000>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + + cbus: bus@ffd00000 { + compatible = "simple-bus"; + reg = <0x0 0xffd00000 0x0 0x25000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; + }; + + apb: apb@ffe00000 { + compatible = "simple-bus"; + reg = <0x0 0xffe00000 0x0 0x200000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index b8dc4dbb391b..f1e5cdbade5e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -44,7 +44,7 @@ linux,cma { compatible = "shared-dma-pool"; reusable; - size = <0x0 0xbc00000>; + size = <0x0 0x10000000>; alignment = <0x0 0x400000>; linux,cma-default; }; @@ -344,7 +344,7 @@ ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; sysctrl_AO: sys-ctrl@0 { - compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"; + compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon"; reg = <0x0 0x0 0x0 0x100>; pwrc_vpu: power-controller-vpu { @@ -423,6 +423,19 @@ }; }; + dmcbus: bus@c8838000 { + compatible = "simple-bus"; + reg = <0x0 0xc8838000 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x400>; + + canvas: video-lut@48 { + compatible = "amlogic,canvas"; + reg = <0x0 0x48 0x0 0x14>; + }; + }; + hiubus: bus@c883c000 { compatible = "simple-bus"; reg = <0x0 0xc883c000 0x0 0x2000>; @@ -431,7 +444,7 @@ ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; sysctrl: system-controller@0 { - compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd"; + compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"; reg = <0 0 0 0x400>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 98cbba6809ca..1ade7e486828 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -390,7 +390,7 @@ }; }; - spi_pins: spi { + spi_pins: spi-pins { mux { groups = "spi_miso", "spi_mosi", diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index f63bceb88caa..90a56af967a7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -13,7 +13,7 @@ / { compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl"; - model = "Libre Technology CC"; + model = "Libre Computer Board AML-S905X-CC"; aliases { serial0 = &uart_AO; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index c87a80e9bcc6..8f0bb3c44bd6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -337,7 +337,7 @@ }; }; - spi_pins: spi { + spi_pins: spi-pins { mux { groups = "spi_miso", "spi_mosi", diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index ce56a4acda4f..ed774ee8f659 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -115,22 +115,17 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - /* input port */ - port@0 { - reg = <0>; + in-ports { + port { etf0_in_port: endpoint { - slave-mode; remote-endpoint = <&main_funnel_out_port>; }; }; + }; - /* output port */ - port@1 { - reg = <0>; + out-ports { + port { etf0_out_port: endpoint { }; }; @@ -144,10 +139,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - tpiu_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port0>; + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; }; }; }; @@ -160,31 +156,29 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - /* output port */ - port@0 { - reg = <0>; + out-ports { + port { main_funnel_out_port: endpoint { remote-endpoint = <&etf0_in_port>; }; }; + }; - /* input ports */ - port@1 { + main_funnel_in_ports: in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; main_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&cluster0_funnel_out_port>; }; }; - port@2 { + port@1 { reg = <1>; main_funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&cluster1_funnel_out_port>; }; }; @@ -199,10 +193,12 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - etr_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port1>; + arm,scatter-gather; + in-ports { + port { + etr_in_port: endpoint { + remote-endpoint = <&replicator_out_port1>; + }; }; }; }; @@ -216,8 +212,10 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - stm_out_port: endpoint { + out-ports { + port { + stm_out_port: endpoint { + }; }; }; }; @@ -238,9 +236,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - cluster0_etm0_out_port: endpoint { - remote-endpoint = <&cluster0_funnel_in_port0>; + out-ports { + port { + cluster0_etm0_out_port: endpoint { + remote-endpoint = <&cluster0_funnel_in_port0>; + }; }; }; }; @@ -252,29 +252,28 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { cluster0_funnel_out_port: endpoint { remote-endpoint = <&main_funnel_in_port0>; }; }; + }; - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; cluster0_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&cluster0_etm0_out_port>; }; }; - port@2 { + port@1 { reg = <1>; cluster0_funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&cluster0_etm1_out_port>; }; }; @@ -297,9 +296,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - cluster0_etm1_out_port: endpoint { - remote-endpoint = <&cluster0_funnel_in_port1>; + out-ports { + port { + cluster0_etm1_out_port: endpoint { + remote-endpoint = <&cluster0_funnel_in_port1>; + }; }; }; }; @@ -320,9 +321,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - cluster1_etm0_out_port: endpoint { - remote-endpoint = <&cluster1_funnel_in_port0>; + out-ports { + port { + cluster1_etm0_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port0>; + }; }; }; }; @@ -334,43 +337,40 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { cluster1_funnel_out_port: endpoint { remote-endpoint = <&main_funnel_in_port1>; }; }; + }; - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; cluster1_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&cluster1_etm0_out_port>; }; }; - port@2 { + port@1 { reg = <1>; cluster1_funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&cluster1_etm1_out_port>; }; }; - port@3 { + port@2 { reg = <2>; cluster1_funnel_in_port2: endpoint { - slave-mode; remote-endpoint = <&cluster1_etm2_out_port>; }; }; - port@4 { + port@3 { reg = <3>; cluster1_funnel_in_port3: endpoint { - slave-mode; remote-endpoint = <&cluster1_etm3_out_port>; }; }; @@ -393,9 +393,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - cluster1_etm1_out_port: endpoint { - remote-endpoint = <&cluster1_funnel_in_port1>; + out-ports { + port { + cluster1_etm1_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port1>; + }; }; }; }; @@ -416,9 +418,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - cluster1_etm2_out_port: endpoint { - remote-endpoint = <&cluster1_funnel_in_port2>; + out-ports { + port { + cluster1_etm2_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port2>; + }; }; }; }; @@ -439,9 +443,11 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - port { - cluster1_etm3_out_port: endpoint { - remote-endpoint = <&cluster1_funnel_in_port3>; + out-ports { + port { + cluster1_etm3_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port3>; + }; }; }; }; @@ -454,7 +460,7 @@ clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -472,12 +478,10 @@ remote-endpoint = <&etr_in_port>; }; }; - - /* replicator input port */ - port@2 { - reg = <0>; + }; + in-ports { + port { replicator_in_port0: endpoint { - slave-mode; }; }; }; diff --git a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi index 0c43fb3525eb..cf285152deab 100644 --- a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi +++ b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi @@ -7,23 +7,16 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* output port */ - port@0 { - reg = <0>; + out-ports { + port { csys1_funnel_out_port: endpoint { remote-endpoint = <&etf1_in_port>; }; }; - - /* input port */ - port@1 { - reg = <0>; + }; + in-ports { + port { csys1_funnel_in_port0: endpoint { - slave-mode; }; }; @@ -37,22 +30,15 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* input port */ - port@0 { - reg = <0>; + in-ports { + port { etf1_in_port: endpoint { - slave-mode; remote-endpoint = <&csys1_funnel_out_port>; }; }; - - /* output port */ - port@1 { - reg = <0>; + }; + out-ports { + port { etf1_out_port: endpoint { remote-endpoint = <&csys2_funnel_in_port1>; }; @@ -67,20 +53,18 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; power-domains = <&scpi_devpd 0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* output port */ - port@0 { - reg = <0>; + out-ports { + port { csys2_funnel_out_port: endpoint { remote-endpoint = <&replicator_in_port0>; }; }; + }; - /* input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { reg = <0>; csys2_funnel_in_port0: endpoint { slave-mode; @@ -88,7 +72,7 @@ }; }; - port@2 { + port@1 { reg = <1>; csys2_funnel_in_port1: endpoint { slave-mode; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index 1fb5c5a0f32e..08d4ba1716c3 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -257,14 +257,11 @@ remote-endpoint = <&main_funnel_in_port2>; }; -&main_funnel { - ports { - port@3 { - reg = <2>; - main_funnel_in_port2: endpoint { - slave-mode; - remote-endpoint = <&stm_out_port>; - }; +&main_funnel_in_ports { + port@2 { + reg = <2>; + main_funnel_in_port2: endpoint { + remote-endpoint = <&stm_out_port>; }; }; }; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index 1193a9e34bbb..667ca989c11b 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb \ - bcm2837-rpi-3-b-plus.dtb + bcm2837-rpi-3-b-plus.dtb \ + bcm2837-rpi-cm3-io3.dtb subdir-y += northstar2 subdir-y += stingray diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts new file mode 100644 index 000000000000..b1c4ab212c64 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "arm/bcm2837-rpi-cm3-io3.dts" diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index 1a406a76c86a..ea854f689fda 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -639,7 +639,7 @@ status = "disabled"; }; - ssp0: ssp@66180000 { + ssp0: spi@66180000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x66180000 0x1000>; interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; @@ -650,7 +650,7 @@ status = "disabled"; }; - ssp1: ssp@66190000 { + ssp1: spi@66190000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x66190000 0x1000>; interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi index bc299c3d9068..a9b92e52d50e 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi @@ -138,7 +138,7 @@ &i2c1 { status = "okay"; - pcf8574: pcf8574@20 { + pcf8574: pcf8574@27 { compatible = "nxp,pcf8574a"; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index e283480bfc7e..cfeaa855bd05 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -521,7 +521,7 @@ status = "disabled"; }; - ssp0: ssp@180000 { + ssp0: spi@180000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x00180000 0x1000>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; @@ -533,7 +533,7 @@ status = "disabled"; }; - ssp1: ssp@190000 { + ssp1: spi@190000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x00190000 0x1000>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index a1e3194b7483..f3ed4c078ba5 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -868,6 +868,14 @@ }; }; }; + + ports { + port { + muic_to_usb: endpoint { + remote-endpoint = <&usb_to_muic>; + }; + }; + }; }; regulators { @@ -939,8 +947,7 @@ status = "okay"; cap-sd-highspeed; disable-wp; - cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpa2 4 GPIO_ACTIVE_LOW>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; @@ -1283,12 +1290,17 @@ &usbdrd_dwc3 { dr_mode = "otg"; - extcon = <&muic>; }; &usbdrd30_phy { vbus-supply = <&safeout1_reg>; status = "okay"; + + port { + usb_to_muic: endpoint { + remote-endpoint = <&muic_to_usb>; + }; + }; }; &xxti { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index 68ac78c4564d..5da732f82fa0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -337,7 +337,7 @@ status = "disabled"; }; - dspi: dspi@2100000 { + dspi: spi@2100000 { compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts index c7b8d2c009cd..dff3d648172e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -3,6 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * Mingkai Hu <Mingkai.hu@freescale.com> */ @@ -50,6 +51,7 @@ nor@0,0 { compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; + big-endian; bank-width = <2>; device-width = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts index 7b01ba8d3b7e..17ca357e854f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -3,6 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * Mingkai Hu <Mingkai.hu@freescale.com> */ @@ -65,6 +66,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x0 0x0 0x8000000>; + big-endian; bank-width = <2>; device-width = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 7881e3d81a9a..3fed504b5381 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -3,6 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * Mingkai Hu <Mingkai.hu@freescale.com> */ @@ -280,11 +281,10 @@ ifc: ifc@1530000 { compatible = "fsl,ifc", "simple-bus"; reg = <0x0 0x1530000 0x0 0x10000>; - big-endian; interrupts = <0 43 0x4>; }; - qspi: quadspi@1550000 { + qspi: spi@1550000 { compatible = "fsl,ls1043a-qspi", "fsl,ls1021a-qspi"; #address-cells = <1>; #size-cells = <0>; @@ -382,7 +382,7 @@ ranges = <0x0 0x5 0x00000000 0x8000000>; }; - dspi0: dspi@2100000 { + dspi0: spi@2100000 { compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; @@ -395,7 +395,7 @@ status = "disabled"; }; - dspi1: dspi@2110000 { + dspi1: spi@2110000 { compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index e69306e6b0b1..e58a8ca1386c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -3,6 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * Shaohui Xie <Shaohui.Xie@nxp.com> */ @@ -141,6 +142,7 @@ nor@0,0 { compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; + big-endian; bank-width = <2>; device-width = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index 440e111651d5..a59b48203688 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -57,12 +57,12 @@ reg = <0x4c>; }; - eeprom@56 { + eeprom@52 { compatible = "atmel,24c512"; reg = <0x52>; }; - eeprom@57 { + eeprom@53 { compatible = "atmel,24c512"; reg = <0x53>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index ef83786b8b90..51cbd50012d6 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -3,6 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * Mingkai Hu <mingkai.hu@nxp.com> */ @@ -198,11 +199,10 @@ ifc: ifc@1530000 { compatible = "fsl,ifc", "simple-bus"; reg = <0x0 0x1530000 0x0 0x10000>; - big-endian; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; }; - qspi: quadspi@1550000 { + qspi: spi@1550000 { compatible = "fsl,ls1021a-qspi"; #address-cells = <1>; #size-cells = <0>; @@ -361,7 +361,7 @@ #thermal-sensor-cells = <1>; }; - dspi: dspi@2100000 { + dspi: spi@2100000 { compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 8cb78dd99672..d188774a36e8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -22,6 +22,8 @@ crypto = &crypto; serial0 = &serial0; serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; }; cpu: cpus { @@ -148,6 +150,7 @@ #address-cells = <2>; #size-cells = <2>; ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; clockgen: clocking@1300000 { compatible = "fsl,ls2080a-clockgen"; @@ -221,6 +224,20 @@ interrupts = <0 32 0x4>; /* Level high type */ }; + serial2: serial@21d0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21d0500 0x0 0x100>; + clocks = <&clockgen 4 3>; + interrupts = <0 33 0x4>; /* Level high type */ + }; + + serial3: serial@21d0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21d0600 0x0 0x100>; + clocks = <&clockgen 4 3>; + interrupts = <0 33 0x4>; /* Level high type */ + }; + cluster1_core0_watchdog: wdt@c000000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; @@ -321,6 +338,8 @@ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ msi-parent = <&its>; + iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */ + dma-coherent; #address-cells = <3>; #size-cells = <1>; @@ -424,6 +443,9 @@ compatible = "arm,mmu-500"; reg = <0 0x5000000 0 0x800000>; #global-interrupts = <12>; + #iommu-cells = <1>; + stream-match-mask = <0x7C00>; + dma-coherent; interrupts = <0 13 4>, /* global secure fault */ <0 14 4>, /* combined secure interrupt */ <0 15 4>, /* global non-secure fault */ @@ -466,10 +488,9 @@ <0 204 4>, <0 205 4>, <0 206 4>, <0 207 4>, <0 208 4>, <0 209 4>; - mmu-masters = <&fsl_mc 0x300 0>; }; - dspi: dspi@2100000 { + dspi: spi@2100000 { status = "disabled"; compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi"; #address-cells = <1>; @@ -595,7 +616,7 @@ 3 0 0x5 0x20000000 0x00010000>; }; - qspi: quadspi@20c0000 { + qspi: spi@20c0000 { status = "disabled"; compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile index 03d93f8ef8a9..f4d68caeba83 100644 --- a/arch/arm64/boot/dts/hisilicon/Makefile +++ b/arch/arm64/boot/dts/hisilicon/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_HISI) += hi3660-hikey960.dtb +dtb-$(CONFIG_ARCH_HISI) += hi3670-hikey970.dtb dtb-$(CONFIG_ARCH_HISI) += hi3798cv200-poplar.dtb dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts new file mode 100644 index 000000000000..4f5118642024 --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Hisilicon HiKey970 Development Board + * + * Copyright (C) 2016, Hisilicon Ltd. + * Copyright (C) 2018, Linaro Ltd. + * + */ + +/dts-v1/; + +#include "hi3670.dtsi" + +/ { + model = "HiKey970"; + compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670"; + + aliases { + serial6 = &uart6; /* console UART */ + }; + + chosen { + stdout-path = "serial6:115200n8"; + }; + + memory@0 { + device_type = "memory"; + /* expect bootloader to fill in this region */ + reg = <0x0 0x0 0x0 0x0>; + }; +}; + +&uart6 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi new file mode 100644 index 000000000000..c90e6f6a34ec --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Hisilicon Hi3670 SoC + * + * Copyright (C) 2016, Hisilicon Ltd. + * Copyright (C) 2018, Linaro Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "hisilicon,hi3670"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + + cpu4: cpu@100 { + compatible = "arm,cortex-a73", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x100>; + enable-method = "psci"; + }; + + cpu5: cpu@101 { + compatible = "arm,cortex-a73", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x101>; + enable-method = "psci"; + }; + + cpu6: cpu@102 { + compatible = "arm,cortex-a73", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x102>; + enable-method = "psci"; + }; + + cpu7: cpu@103 { + compatible = "arm,cortex-a73", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x103>; + enable-method = "psci"; + }; + }; + + gic: interrupt-controller@e82b0000 { + compatible = "arm,gic-400"; + reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */ + <0x0 0xe82b2000 0 0x2000>, /* GICC */ + <0x0 0xe82b4000 0 0x2000>, /* GICH */ + <0x0 0xe82b6000 0 0x2000>; /* GICV */ + #interrupt-cells = <3>; + #address-cells = <0>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <1920000>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + uart6_clk: clk_19_2M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + uart6: serial@fff32000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfff32000 0x0 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart6_clk &uart6_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi index 7afee5d5087b..68c52f1149be 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi @@ -20,22 +20,18 @@ clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { soc_funnel_out: endpoint { remote-endpoint = <&etf_in>; }; }; + }; - port@1 { - reg = <0>; + in-ports { + port { soc_funnel_in: endpoint { - slave-mode; remote-endpoint = <&acpu_funnel_out>; }; @@ -49,21 +45,17 @@ clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + in-ports { + port { etf_in: endpoint { - slave-mode; remote-endpoint = <&soc_funnel_out>; }; }; + }; - port@1 { - reg = <0>; + out-ports { + port { etf_out: endpoint { remote-endpoint = <&replicator_in>; @@ -77,20 +69,20 @@ clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + in-ports { + port { replicator_in: endpoint { - slave-mode; remote-endpoint = <&etf_out>; }; }; + }; - port@1 { + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; replicator_out0: endpoint { remote-endpoint = @@ -98,7 +90,7 @@ }; }; - port@2 { + port@1 { reg = <1>; replicator_out1: endpoint { remote-endpoint = @@ -114,14 +106,9 @@ clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + in-ports { + port { etr_in: endpoint { - slave-mode; remote-endpoint = <&replicator_out0>; }; @@ -135,14 +122,9 @@ clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + in-ports { + port { tpiu_in: endpoint { - slave-mode; remote-endpoint = <&replicator_out1>; }; @@ -156,85 +138,78 @@ clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { acpu_funnel_out: endpoint { remote-endpoint = <&soc_funnel_in>; }; }; + }; - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; acpu_funnel_in0: endpoint { - slave-mode; remote-endpoint = <&etm0_out>; }; }; - port@2 { + port@1 { reg = <1>; acpu_funnel_in1: endpoint { - slave-mode; remote-endpoint = <&etm1_out>; }; }; - port@3 { + port@2 { reg = <2>; acpu_funnel_in2: endpoint { - slave-mode; remote-endpoint = <&etm2_out>; }; }; - port@4 { + port@3 { reg = <3>; acpu_funnel_in3: endpoint { - slave-mode; remote-endpoint = <&etm3_out>; }; }; - port@5 { + port@4 { reg = <4>; acpu_funnel_in4: endpoint { - slave-mode; remote-endpoint = <&etm4_out>; }; }; - port@6 { + port@5 { reg = <5>; acpu_funnel_in5: endpoint { - slave-mode; remote-endpoint = <&etm5_out>; }; }; - port@7 { + port@6 { reg = <6>; acpu_funnel_in6: endpoint { - slave-mode; remote-endpoint = <&etm6_out>; }; }; - port@8 { + port@7 { reg = <7>; acpu_funnel_in7: endpoint { - slave-mode; remote-endpoint = <&etm7_out>; }; @@ -251,10 +226,12 @@ cpu = <&cpu0>; - port { - etm0_out: endpoint { - remote-endpoint = - <&acpu_funnel_in0>; + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&acpu_funnel_in0>; + }; }; }; }; @@ -268,10 +245,12 @@ cpu = <&cpu1>; - port { - etm1_out: endpoint { - remote-endpoint = - <&acpu_funnel_in1>; + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&acpu_funnel_in1>; + }; }; }; }; @@ -285,10 +264,12 @@ cpu = <&cpu2>; - port { - etm2_out: endpoint { - remote-endpoint = - <&acpu_funnel_in2>; + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&acpu_funnel_in2>; + }; }; }; }; @@ -302,10 +283,12 @@ cpu = <&cpu3>; - port { - etm3_out: endpoint { - remote-endpoint = - <&acpu_funnel_in3>; + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&acpu_funnel_in3>; + }; }; }; }; @@ -319,10 +302,12 @@ cpu = <&cpu4>; - port { - etm4_out: endpoint { - remote-endpoint = - <&acpu_funnel_in4>; + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = + <&acpu_funnel_in4>; + }; }; }; }; @@ -336,10 +321,12 @@ cpu = <&cpu5>; - port { - etm5_out: endpoint { - remote-endpoint = - <&acpu_funnel_in5>; + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = + <&acpu_funnel_in5>; + }; }; }; }; @@ -353,10 +340,12 @@ cpu = <&cpu6>; - port { - etm6_out: endpoint { - remote-endpoint = - <&acpu_funnel_in6>; + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = + <&acpu_funnel_in6>; + }; }; }; }; @@ -370,10 +359,12 @@ cpu = <&cpu7>; - port { - etm7_out: endpoint { - remote-endpoint = - <&acpu_funnel_in7>; + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = + <&acpu_funnel_in7>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 247024df714f..97d5bf2c6ec5 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -99,6 +99,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ @@ -111,6 +112,7 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ @@ -123,6 +125,7 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ @@ -135,6 +138,7 @@ reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&CLUSTER1_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ @@ -147,6 +151,7 @@ reg = <0x0 0x101>; enable-method = "psci"; next-level-cache = <&CLUSTER1_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ @@ -159,6 +164,7 @@ reg = <0x0 0x102>; enable-method = "psci"; next-level-cache = <&CLUSTER1_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ @@ -171,6 +177,7 @@ reg = <0x0 0x103>; enable-method = "psci"; next-level-cache = <&CLUSTER1_L2>; + clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; #cooling-cells = <2>; /* min followed by max */ diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi index 860c8fb10795..4bde7b6f2b11 100644 --- a/arch/arm64/boot/dts/lg/lg1312.dtsi +++ b/arch/arm64/boot/dts/lg/lg1312.dtsi @@ -168,14 +168,14 @@ clock-names = "apb_pclk"; status="disabled"; }; - spi0: ssp@fe800000 { + spi0: spi@fe800000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x0 0xfe800000 0x1000>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; }; - spi1: ssp@fe900000 { + spi1: spi@fe900000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x0 0xfe900000 0x1000>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi index 1887af654a7d..16ced1ff1ad3 100644 --- a/arch/arm64/boot/dts/lg/lg1313.dtsi +++ b/arch/arm64/boot/dts/lg/lg1313.dtsi @@ -168,14 +168,14 @@ clock-names = "apb_pclk"; status="disabled"; }; - spi0: ssp@fe800000 { + spi0: spi@fe800000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x0 0xfe800000 0x1000>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_bus>; clock-names = "apb_pclk"; }; - spi1: ssp@fe900000 { + spi1: spi@fe900000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x0 0xfe900000 0x1000>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index ea9d49f2a911..eca8bac6303a 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi index 97558a64e276..6800945a88ad 100644 --- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi @@ -16,7 +16,7 @@ compatible = "marvell,armada3720", "marvell,armada3710"; cpus { - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53","arm,armv8"; reg = <0x1>; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index d9531e242eb4..4472bcd8f9fb 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -40,7 +40,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0>; @@ -80,6 +80,19 @@ /* 32M internal register @ 0xd000_0000 */ ranges = <0x0 0x0 0xd0000000 0x2000000>; + wdt: watchdog@8300 { + compatible = "marvell,armada-3700-wdt"; + reg = <0x8300 0x40>; + marvell,system-controller = <&cpu_misc>; + clocks = <&xtalclk>; + }; + + cpu_misc: system-controller@d000 { + compatible = "marvell,armada-3700-cpu-misc", + "syscon"; + reg = <0xd000 0x1000>; + }; + spi0: spi@10600 { compatible = "marvell,armada-3700-spi"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts new file mode 100644 index 000000000000..9473d40a292a --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -0,0 +1,441 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 SolidRun ltd. + * Based on Marvell MACCHIATOBin board + * + * Device Tree file for SolidRun's ClearFog GT 8K + */ + +#include "armada-8040.dtsi" + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "SolidRun ClearFog GT 8K"; + compatible = "solidrun,clearfog-gt-8k", "marvell,armada8040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + aliases { + ethernet0 = &cp1_eth1; + ethernet1 = &cp0_eth0; + ethernet2 = &cp1_eth2; + }; + + v_3_3: regulator-3-3v { + compatible = "regulator-fixed"; + regulator-name = "v_3_3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; + + v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { + compatible = "regulator-fixed"; + gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_xhci_vbus_pins>; + regulator-name = "v_5v0_usb3_hst_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + status = "okay"; + }; + + usb3h0_phy: usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&v_5v0_usb3_hst_vbus>; + }; + + sfp_cp0_eth0: sfp-cp0-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&cp0_i2c1>; + mod-def0-gpio = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&cp0_led0_pins + &cp0_led1_pins>; + pinctrl-names = "default"; + /* No designated function for these LEDs at the moment */ + led0 { + label = "clearfog-gt-8k:green:led0"; + gpios = <&cp0_gpio2 8 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + led1 { + label = "clearfog-gt-8k:green:led1"; + gpios = <&cp0_gpio2 9 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>; + pinctrl-names = "default"; + + button_0 { + /* The rear button */ + label = "Rear Button"; + gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = <BTN_0>; + }; + + button_1 { + /* The wps button */ + label = "WPS Button"; + gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = <KEY_WPS_BUTTON>; + }; + }; +}; + +&uart0 { + status = "okay"; + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +&ap_sdhci0 { + bus-width = <8>; + no-1-8-v; + no-sd; + no-sdio; + non-removable; + status = "okay"; + vqmmc-supply = <&v_3_3>; +}; + +&cp0_i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + status = "okay"; +}; + +&cp0_i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c1_pins>; + status = "okay"; +}; + +&cp0_pinctrl { + /* + * MPP Bus: + * [0-31] = 0xff: Keep default CP0_shared_pins: + * [11] CLKOUT_MPP_11 (out) + * [23] LINK_RD_IN_CP2CP (in) + * [25] CLKOUT_MPP_25 (out) + * [29] AVS_FB_IN_CP2CP (in) + * [32, 33, 34] pci0/1/2 reset + * [35-38] CP0 I2C1 and I2C0 + * [39] GPIO reset button + * [40,41] LED0 and LED1 + * [43] 1512 phy reset + * [47] USB VBUS EN (active low) + * [48] FAN PWM + * [49] SFP+ present signal + * [50] TPM interrupt + * [51] WLAN0 disable + * [52] WLAN1 disable + * [53] LTE disable + * [54] NFC reset + * [55] Micro SD card detect + * [56-61] Micro SD + */ + + cp0_pci0_reset_pins: pci0-reset-pins { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + + cp0_pci1_reset_pins: pci1-reset-pins { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; + + cp0_pci2_reset_pins: pci2-reset-pins { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + + cp0_i2c1_pins: i2c1-pins { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + + cp0_i2c0_pins: i2c0-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + + cp0_gpio_reset_pins: gpio-reset-pins { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + cp0_led0_pins: led0-pins { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + cp0_led1_pins: led1-pins { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + cp0_copper_eth_phy_reset: copper-eth-phy-reset { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + + cp0_xhci_vbus_pins: xhci0-vbus-pins { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + cp0_fan_pwm_pins: fan-pwm-pins { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + + cp0_sfp_present_pins: sfp-present-pins { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + + cp0_tpm_irq_pins: tpm-irq-pins { + marvell,pins = "mpp50"; + marvell,function = "gpio"; + }; + + cp0_sdhci_pins: sdhci-pins { + marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", + "mpp60", "mpp61"; + marvell,function = "sdio"; + }; +}; + +&cp0_pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_pci0_reset_pins>; + reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&cp0_gpio2 { + sata_reset { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* SFP */ +&cp0_eth0 { + status = "okay"; + phy-mode = "10gbase-kr"; + managed = "in-band-status"; + phys = <&cp0_comphy2 0>; + sfp = <&sfp_cp0_eth0>; +}; + +&cp0_sdhci0 { + broken-cd; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins>; + status = "okay"; + vqmmc-supply = <&v_3_3>; +}; + +&cp1_pinctrl { + /* + * MPP Bus: + * [0-5] TDM + * [6] VHV Enable + * [7] CP1 SPI0 CSn1 (FXS) + * [8] CP1 SPI0 CSn0 (TPM) + * [9.11]CP1 SPI0 MOSI/MISO/CLK + * [13] CP1 SPI1 MISO (TDM and SPI ROM shared) + * [14] CP1 SPI1 CS0n (64Mb SPI ROM) + * [15] CP1 SPI1 MOSI (TDM and SPI ROM shared) + * [16] CP1 SPI1 CLK (TDM and SPI ROM shared) + * [24] Topaz switch reset + * [26] Buzzer + * [27] CP1 SMI MDIO + * [28] CP1 SMI MDC + * [29] CP0 10G SFP TX Disable + * [30] WPS button + * [31] Front panel button + */ + + cp1_spi1_pins: spi1-pins { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + + cp1_switch_reset_pins: switch-reset-pins { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + + cp1_ge_mdio_pins: ge-mdio-pins { + marvell,pins = "mpp27", "mpp28"; + marvell,function = "ge"; + }; + + cp1_sfp_tx_disable_pins: sfp-tx-disable-pins { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + cp1_wps_button_pins: wps-button-pins { + marvell,pins = "mpp30"; + marvell,function = "gpio"; + }; +}; + +&cp1_sata0 { + pinctrl-0 = <&cp0_pci1_reset_pins>; + status = "okay"; +}; + +&cp1_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_ge_mdio_pins>; + status = "okay"; + + ge_phy: ethernet-phy@0 { + /* LED0 - GB link + * LED1 - on: link, blink: activity + */ + marvell,reg-init = <3 16 0 0x1017>; + reg = <0>; + }; + + switch0: switch0@4 { + compatible = "marvell,mv88e6085"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_switch_reset_pins>; + reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan2"; + phy-handle = <&switch0phy0>; + }; + + port@2 { + reg = <2>; + label = "lan1"; + phy-handle = <&switch0phy1>; + }; + + port@3 { + reg = <3>; + label = "lan4"; + phy-handle = <&switch0phy2>; + }; + + port@4 { + reg = <4>; + label = "lan3"; + phy-handle = <&switch0phy3>; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&cp1_eth2>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@11 { + reg = <0x11>; + }; + + switch0phy1: switch0phy1@12 { + reg = <0x12>; + }; + + switch0phy2: switch0phy2@13 { + reg = <0x13>; + }; + + switch0phy3: switch0phy3@14 { + reg = <0x14>; + }; + }; + }; +}; + +&cp1_ethernet { + status = "okay"; +}; + +/* 1G copper */ +&cp1_eth1 { + status = "okay"; + phy-mode = "sgmii"; + phy = <&ge_phy>; + phys = <&cp1_comphy3 1>; +}; + +/* Switch uplink */ +&cp1_eth2 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp1_comphy5 2>; + fixed-link { + speed = <2500>; + full-duplex; + }; +}; + +&cp1_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_spi1_pins>; + status = "okay"; + + spi-flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <50000000>; + reg = <0>; + }; +}; + +&cp1_usb3_0 { + usb-phy = <&usb3h0_phy>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi index 64b5e61a698e..d3c0636558ff 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi @@ -15,13 +15,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x000>; enable-method = "psci"; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x001>; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi index 746e792767f5..64632c873888 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi @@ -15,29 +15,33 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x000>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x001>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; }; - cpu@100 { + cpu2: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x100>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; }; - cpu@101 { + cpu3: cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x101>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 176e38d54872..073610ac0a53 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -6,6 +6,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> /dts-v1/; @@ -27,6 +28,33 @@ method = "smc"; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + idle_states { + entry_method = "arm,pcsi"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <80>; + exit-latency-us = <160>; + min-residency-us = <320>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <500>; + exit-latency-us = <1000>; + min-residency-us = <2500>; + }; + }; + }; + ap806 { #address-cells = <2>; #size-cells = <2>; @@ -124,6 +152,15 @@ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; }; + sei: interrupt-controller@3f0200 { + compatible = "marvell,ap806-sei"; + reg = <0x3f0200 0x40>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-controller; + msi-controller; + }; + xor@400000 { compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; reg = <0x400000 0x1000>, @@ -247,11 +284,76 @@ }; }; - ap_thermal: thermal@6f808c { - compatible = "marvell,armada-ap806-thermal"; - reg = <0x6f808c 0x4>, - <0x6f8084 0x8>; + ap_syscon1: system-controller@6f8000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f8000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + ap_thermal: thermal-sensor@80 { + compatible = "marvell,armada-ap806-thermal"; + reg = <0x80 0x10>; + #thermal-sensor-cells = <1>; + }; }; }; }; + + /* + * The thermal IP features one internal sensor plus, if applicable, one + * remote channel wired to one sensor per CPU. + * + * The cooling maps are always empty as there are no cooling devices. + */ + thermal-zones { + ap_thermal_ic: ap-thermal-ic { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 0>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu1: ap-thermal-cpu1 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 1>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu2: ap-thermal-cpu2 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 2>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu3: ap-thermal-cpu3 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 3>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu4: ap-thermal-cpu4 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 4>; + + trips { }; + cooling-maps { }; + }; + }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi index 7d00ae78fc79..b788cb63caf2 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi @@ -13,49 +13,49 @@ #size-cells = <0>; compatible = "marvell,armada-ap810-octa"; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x000>; enable-method = "psci"; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x001>; enable-method = "psci"; }; - cpu@100 { + cpu2: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x100>; enable-method = "psci"; }; - cpu@101 { + cpu3: cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x101>; enable-method = "psci"; }; - cpu@200 { + cpu4: cpu@200 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x200>; enable-method = "psci"; }; - cpu@201 { + cpu5: cpu@201 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x201>; enable-method = "psci"; }; - cpu@300 { + cpu6: cpu@300 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x300>; enable-method = "psci"; }; - cpu@301 { + cpu7: cpu@301 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x301>; diff --git a/arch/arm64/boot/dts/marvell/armada-common.dtsi b/arch/arm64/boot/dts/marvell/armada-common.dtsi index d5e8aedec188..b29c6405d214 100644 --- a/arch/arm64/boot/dts/marvell/armada-common.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi @@ -7,4 +7,5 @@ #define PASTER(x, y) x ## y #define EVALUATOR(x, y) PASTER(x, y) #define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name)) +#define CP110_NODE_NAME(name) EVALUATOR(CP110_NAME, EVALUATOR(-, name)) #define ADDRESSIFY(addr) EVALUATOR(0x, addr) diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index 840c8454d03e..b9d9f31e3ba1 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -6,6 +6,7 @@ */ #include <dt-bindings/interrupt-controller/mvebu-icu.h> +#include <dt-bindings/thermal/thermal.h> #include "armada-common.dtsi" @@ -19,13 +20,30 @@ * save one indentation level */ CP110_NAME: CP110_NAME { }; + + /* + * CPs only have one sensor in the thermal IC. + * + * The cooling maps are empty as there are no cooling devices. + */ + thermal-zones { + CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&CP110_LABEL(thermal) 0>; + + trips { }; + cooling-maps { }; + }; + }; }; &CP110_NAME { #address-cells = <2>; #size-cells = <2>; compatible = "simple-bus"; - interrupt-parent = <&CP110_LABEL(icu)>; + interrupt-parent = <&CP110_LABEL(icu_nsr)>; ranges; config-space@CP110_BASE { @@ -47,42 +65,57 @@ dma-coherent; CP110_LABEL(eth0): eth0 { - interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>, + <43 IRQ_TYPE_LEVEL_HIGH>, + <47 IRQ_TYPE_LEVEL_HIGH>, + <51 IRQ_TYPE_LEVEL_HIGH>, + <55 IRQ_TYPE_LEVEL_HIGH>, + <59 IRQ_TYPE_LEVEL_HIGH>, + <63 IRQ_TYPE_LEVEL_HIGH>, + <67 IRQ_TYPE_LEVEL_HIGH>, + <71 IRQ_TYPE_LEVEL_HIGH>, + <129 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; port-id = <0>; gop-port-id = <0>; status = "disabled"; }; CP110_LABEL(eth1): eth1 { - interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH>, + <44 IRQ_TYPE_LEVEL_HIGH>, + <48 IRQ_TYPE_LEVEL_HIGH>, + <52 IRQ_TYPE_LEVEL_HIGH>, + <56 IRQ_TYPE_LEVEL_HIGH>, + <60 IRQ_TYPE_LEVEL_HIGH>, + <64 IRQ_TYPE_LEVEL_HIGH>, + <68 IRQ_TYPE_LEVEL_HIGH>, + <72 IRQ_TYPE_LEVEL_HIGH>, + <128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; port-id = <1>; gop-port-id = <2>; status = "disabled"; }; CP110_LABEL(eth2): eth2 { - interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH>, + <45 IRQ_TYPE_LEVEL_HIGH>, + <49 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>, + <57 IRQ_TYPE_LEVEL_HIGH>, + <61 IRQ_TYPE_LEVEL_HIGH>, + <65 IRQ_TYPE_LEVEL_HIGH>, + <69 IRQ_TYPE_LEVEL_HIGH>, + <73 IRQ_TYPE_LEVEL_HIGH>, + <127 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; port-id = <2>; gop-port-id = <3>; status = "disabled"; @@ -150,22 +183,31 @@ CP110_LABEL(icu): interrupt-controller@1e0000 { compatible = "marvell,cp110-icu"; reg = <0x1e0000 0x440>; - #interrupt-cells = <3>; - interrupt-controller; - msi-parent = <&gicp>; + #address-cells = <1>; + #size-cells = <1>; + + CP110_LABEL(icu_nsr): interrupt-controller@10 { + compatible = "marvell,cp110-icu-nsr"; + reg = <0x10 0x20>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&gicp>; + }; + + CP110_LABEL(icu_sei): interrupt-controller@50 { + compatible = "marvell,cp110-icu-sei"; + reg = <0x50 0x10>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&sei>; + }; }; CP110_LABEL(rtc): rtc@284000 { compatible = "marvell,armada-8k-rtc"; reg = <0x284000 0x20>, <0x284080 0x24>; reg-names = "rtc", "rtc-soc"; - interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; - }; - - CP110_LABEL(thermal): thermal@400078 { - compatible = "marvell,armada-cp110-thermal"; - reg = <0x400078 0x4>, - <0x400070 0x8>; + interrupts = <77 IRQ_TYPE_LEVEL_HIGH>; }; CP110_LABEL(syscon0): system-controller@440000 { @@ -185,10 +227,10 @@ #gpio-cells = <2>; gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>; interrupt-controller; - interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, + <85 IRQ_TYPE_LEVEL_HIGH>, + <84 IRQ_TYPE_LEVEL_HIGH>, + <83 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -200,20 +242,33 @@ #gpio-cells = <2>; gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>; interrupt-controller; - interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, + <81 IRQ_TYPE_LEVEL_HIGH>, + <80 IRQ_TYPE_LEVEL_HIGH>, + <79 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; }; + CP110_LABEL(syscon1): system-controller@400000 { + compatible = "syscon", "simple-mfd"; + reg = <0x400000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + CP110_LABEL(thermal): thermal-sensor@70 { + compatible = "marvell,armada-cp110-thermal"; + reg = <0x70 0x10>; + #thermal-sensor-cells = <1>; + }; + }; + CP110_LABEL(usb3_0): usb3@500000 { compatible = "marvell,armada-8k-xhci", "generic-xhci"; reg = <0x500000 0x4000>; dma-coherent; - interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <106 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "reg"; clocks = <&CP110_LABEL(clk) 1 22>, <&CP110_LABEL(clk) 1 16>; @@ -225,7 +280,7 @@ "generic-xhci"; reg = <0x510000 0x4000>; dma-coherent; - interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <105 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "reg"; clocks = <&CP110_LABEL(clk) 1 23>, <&CP110_LABEL(clk) 1 16>; @@ -237,7 +292,7 @@ "generic-ahci"; reg = <0x540000 0x30000>; dma-coherent; - interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&CP110_LABEL(clk) 1 15>, <&CP110_LABEL(clk) 1 16>; status = "disabled"; @@ -290,7 +345,7 @@ reg = <0x701000 0x20>; #address-cells = <1>; #size-cells = <0>; - interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <120 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "reg"; clocks = <&CP110_LABEL(clk) 1 21>, <&CP110_LABEL(clk) 1 17>; @@ -302,7 +357,7 @@ reg = <0x701100 0x20>; #address-cells = <1>; #size-cells = <0>; - interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <121 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "reg"; clocks = <&CP110_LABEL(clk) 1 21>, <&CP110_LABEL(clk) 1 17>; @@ -313,7 +368,7 @@ compatible = "snps,dw-apb-uart"; reg = <0x702000 0x100>; reg-shift = <2>; - interrupts = <ICU_GRP_NSR 122 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <122 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; clock-names = "baudclk", "apb_pclk"; clocks = <&CP110_LABEL(clk) 1 21>, @@ -325,7 +380,7 @@ compatible = "snps,dw-apb-uart"; reg = <0x702100 0x100>; reg-shift = <2>; - interrupts = <ICU_GRP_NSR 123 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <123 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; clock-names = "baudclk", "apb_pclk"; clocks = <&CP110_LABEL(clk) 1 21>, @@ -337,7 +392,7 @@ compatible = "snps,dw-apb-uart"; reg = <0x702200 0x100>; reg-shift = <2>; - interrupts = <ICU_GRP_NSR 124 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <124 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; clock-names = "baudclk", "apb_pclk"; clocks = <&CP110_LABEL(clk) 1 21>, @@ -349,7 +404,7 @@ compatible = "snps,dw-apb-uart"; reg = <0x702300 0x100>; reg-shift = <2>; - interrupts = <ICU_GRP_NSR 125 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <125 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; clock-names = "baudclk", "apb_pclk"; clocks = <&CP110_LABEL(clk) 1 21>, @@ -368,7 +423,7 @@ reg = <0x720000 0x54>; #address-cells = <1>; #size-cells = <0>; - interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "reg"; clocks = <&CP110_LABEL(clk) 1 2>, <&CP110_LABEL(clk) 1 17>; @@ -380,7 +435,7 @@ compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76"; reg = <0x760000 0x7d>; - interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "reg"; clocks = <&CP110_LABEL(clk) 1 25>, <&CP110_LABEL(clk) 1 17>; @@ -390,7 +445,7 @@ CP110_LABEL(sdhci0): sdhci@780000 { compatible = "marvell,armada-cp110-sdhci"; reg = <0x780000 0x300>; - interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "axi"; clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>; dma-coherent; @@ -400,12 +455,12 @@ CP110_LABEL(crypto): crypto@800000 { compatible = "inside-secure,safexcel-eip197b"; reg = <0x800000 0x200000>; - interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>, - <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <87 IRQ_TYPE_LEVEL_HIGH>, + <88 IRQ_TYPE_LEVEL_HIGH>, + <89 IRQ_TYPE_LEVEL_HIGH>, + <90 IRQ_TYPE_LEVEL_HIGH>, + <91 IRQ_TYPE_LEVEL_HIGH>, + <92 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", "eip"; clock-names = "core", "reg"; @@ -434,8 +489,8 @@ /* non-prefetchable memory */ 0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; clock-names = "core", "reg"; clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1 14>; @@ -461,8 +516,8 @@ /* non-prefetchable memory */ 0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; clock-names = "core", "reg"; @@ -489,8 +544,8 @@ /* non-prefetchable memory */ 0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; clock-names = "core", "reg"; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 5b7fd6ad96e4..e8f952fb279b 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -5,4 +5,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index 75cc0f7cc088..ee627a7c7b45 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -301,6 +301,17 @@ status = "disabled"; }; + spis1: spi@10013000 { + compatible = "mediatek,mt2712-spi-slave"; + reg = <0 0x10013000 0 0x100>; + interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_AO_SPI1>; + clock-names = "spi"; + assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>; + status = "disabled"; + }; + apmixedsys: syscon@10209000 { compatible = "mediatek,mt2712-apmixedsys", "syscon"; reg = <0 0x10209000 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts new file mode 100644 index 000000000000..5d6005c9b097 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -0,0 +1,530 @@ +/* + * Copyright (c) 2018 MediaTek Inc. + * Author: Ryder Lee <ryder.lee@mediatek.com> + * + * SPDX-License-Identifier: (GPL-2.0 OR MIT) + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +#include "mt7622.dtsi" +#include "mt6380.dtsi" + +/ { + model = "Bananapi BPI-R64"; + compatible = "bananapi,bpi-r64", "mediatek,mt7622"; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512"; + }; + + cpus { + cpu@0 { + proc-supply = <&mt6380_vcpu_reg>; + sram-supply = <&mt6380_vm_reg>; + }; + + cpu@1 { + proc-supply = <&mt6380_vcpu_reg>; + sram-supply = <&mt6380_vm_reg>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + factory { + label = "factory"; + linux,code = <BTN_0>; + gpios = <&pio 0 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&pio 102 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + + green { + label = "bpi-r64:pio:green"; + gpios = <&pio 89 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red { + label = "bpi-r64:pio:red"; + gpios = <&pio 88 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + memory { + reg = <0 0x40000000 0 0x40000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "fixed-5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&bch { + status = "disabled"; +}; + +&btif { + status = "okay"; +}; + +&cir { + pinctrl-names = "default"; + pinctrl-0 = <&irrx_pins>; + status = "okay"; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <ð_pins>; + status = "okay"; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-handle = <&phy5>; + }; + + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "sgmii"; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&emmc_pins_default>; + pinctrl-1 = <&emmc_pins_uhs>; + status = "okay"; + bus-width = <8>; + max-frequency = <50000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; + non-removable; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sd0_pins_default>; + pinctrl-1 = <&sd0_pins_uhs>; + status = "okay"; + bus-width = <4>; + max-frequency = <50000000>; + cap-sd-highspeed; + r_smpl = <1>; + cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; +}; + +&nandc { + pinctrl-names = "default"; + pinctrl-0 = <¶llel_nand_pins>; + status = "disabled"; +}; + +&nor_flash { + pinctrl-names = "default"; + pinctrl-0 = <&spi_nor_pins>; + status = "disabled"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>; + status = "okay"; + + pcie@0,0 { + status = "okay"; + }; + + pcie@1,0 { + status = "okay"; + }; +}; + +&pio { + /* Attention: GPIO 90 is used to switch between PCIe@1,0 and + * SATA functions. i.e. output-high: PCIe, output-low: SATA + */ + asm_sel { + gpio-hog; + gpios = <90 GPIO_ACTIVE_HIGH>; + output-high; + }; + + /* eMMC is shared pin with parallel NAND */ + emmc_pins_default: emmc-pins-default { + mux { + function = "emmc", "emmc_rst"; + groups = "emmc"; + }; + + /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7", + * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4, + * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively + */ + conf-cmd-dat { + pins = "NDL0", "NDL1", "NDL2", + "NDL3", "NDL4", "NDL5", + "NDL6", "NDL7", "NRB"; + input-enable; + bias-pull-up; + }; + + conf-clk { + pins = "NCLE"; + bias-pull-down; + }; + }; + + emmc_pins_uhs: emmc-pins-uhs { + mux { + function = "emmc"; + groups = "emmc"; + }; + + conf-cmd-dat { + pins = "NDL0", "NDL1", "NDL2", + "NDL3", "NDL4", "NDL5", + "NDL6", "NDL7", "NRB"; + input-enable; + drive-strength = <4>; + bias-pull-up; + }; + + conf-clk { + pins = "NCLE"; + drive-strength = <4>; + bias-pull-down; + }; + }; + + eth_pins: eth-pins { + mux { + function = "eth"; + groups = "mdc_mdio", "rgmii_via_gmac2"; + }; + }; + + i2c1_pins: i2c1-pins { + mux { + function = "i2c"; + groups = "i2c1_0"; + }; + }; + + i2c2_pins: i2c2-pins { + mux { + function = "i2c"; + groups = "i2c2_0"; + }; + }; + + i2s1_pins: i2s1-pins { + mux { + function = "i2s"; + groups = "i2s_out_mclk_bclk_ws", + "i2s1_in_data", + "i2s1_out_data"; + }; + + conf { + pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK", + "I2S_WS", "I2S_MCLK"; + drive-strength = <12>; + bias-pull-down; + }; + }; + + irrx_pins: irrx-pins { + mux { + function = "ir"; + groups = "ir_1_rx"; + }; + }; + + irtx_pins: irtx-pins { + mux { + function = "ir"; + groups = "ir_1_tx"; + }; + }; + + /* Parallel nand is shared pin with eMMC */ + parallel_nand_pins: parallel-nand-pins { + mux { + function = "flash"; + groups = "par_nand"; + }; + }; + + pcie0_pins: pcie0-pins { + mux { + function = "pcie"; + groups = "pcie0_pad_perst", + "pcie0_1_waken", + "pcie0_1_clkreq"; + }; + }; + + pcie1_pins: pcie1-pins { + mux { + function = "pcie"; + groups = "pcie1_pad_perst", + "pcie1_0_waken", + "pcie1_0_clkreq"; + }; + }; + + pmic_bus_pins: pmic-bus-pins { + mux { + function = "pmic"; + groups = "pmic_bus"; + }; + }; + + pwm7_pins: pwm1-2-pins { + mux { + function = "pwm"; + groups = "pwm_ch7_2"; + }; + }; + + wled_pins: wled-pins { + mux { + function = "led"; + groups = "wled"; + }; + }; + + sd0_pins_default: sd0-pins-default { + mux { + function = "sd"; + groups = "sd_0"; + }; + + /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN", + * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1, + * DAT2, DAT3, CMD, CLK for SD respectively. + */ + conf-cmd-data { + pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN", + "I2S2_IN","I2S4_OUT"; + input-enable; + drive-strength = <8>; + bias-pull-up; + }; + conf-clk { + pins = "I2S3_OUT"; + drive-strength = <12>; + bias-pull-down; + }; + conf-cd { + pins = "TXD3"; + bias-pull-up; + }; + }; + + sd0_pins_uhs: sd0-pins-uhs { + mux { + function = "sd"; + groups = "sd_0"; + }; + + conf-cmd-data { + pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN", + "I2S2_IN","I2S4_OUT"; + input-enable; + bias-pull-up; + }; + + conf-clk { + pins = "I2S3_OUT"; + bias-pull-down; + }; + }; + + /* Serial NAND is shared pin with SPI-NOR */ + serial_nand_pins: serial-nand-pins { + mux { + function = "flash"; + groups = "snfi"; + }; + }; + + spic0_pins: spic0-pins { + mux { + function = "spi"; + groups = "spic0_0"; + }; + }; + + spic1_pins: spic1-pins { + mux { + function = "spi"; + groups = "spic1_0"; + }; + }; + + /* SPI-NOR is shared pin with serial NAND */ + spi_nor_pins: spi-nor-pins { + mux { + function = "flash"; + groups = "spi_nor"; + }; + }; + + /* serial NAND is shared pin with SPI-NOR */ + serial_nand_pins: serial-nand-pins { + mux { + function = "flash"; + groups = "snfi"; + }; + }; + + uart0_pins: uart0-pins { + mux { + function = "uart"; + groups = "uart0_0_tx_rx" ; + }; + }; + + uart2_pins: uart2-pins { + mux { + function = "uart"; + groups = "uart2_1_tx_rx" ; + }; + }; + + watchdog_pins: watchdog-pins { + mux { + function = "watchdog"; + groups = "watchdog"; + }; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm7_pins>; + status = "okay"; +}; + +&pwrap { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_bus_pins>; + + status = "okay"; +}; + +&sata { + status = "disable"; +}; + +&sata_phy { + status = "disable"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spic0_pins>; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spic1_pins>; + status = "okay"; +}; + +&ssusb { + vusb33-supply = <®_3p3v>; + vbus-supply = <®_5v>; + status = "okay"; +}; + +&u3phy { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&watchdog { + pinctrl-names = "default"; + pinctrl-0 = <&watchdog_pins>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts index a747b7bf132d..dcad0869b84c 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -51,7 +51,7 @@ }; memory { - reg = <0 0x40000000 0 0x3F000000>; + reg = <0 0x40000000 0 0x20000000>; }; reg_1p8v: regulator-1p8v { @@ -81,6 +81,103 @@ }; }; +&bch { + status = "disabled"; +}; + +&btif { + status = "okay"; +}; + +&cir { + pinctrl-names = "default"; + pinctrl-0 = <&irrx_pins>; + status = "okay"; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <ð_pins>; + status = "okay"; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-handle = <&phy5>; + }; + + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "sgmii"; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&emmc_pins_default>; + pinctrl-1 = <&emmc_pins_uhs>; + status = "okay"; + bus-width = <8>; + max-frequency = <50000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; + non-removable; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sd0_pins_default>; + pinctrl-1 = <&sd0_pins_uhs>; + status = "okay"; + bus-width = <4>; + max-frequency = <50000000>; + cap-sd-highspeed; + r_smpl = <1>; + cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; +}; + +&nandc { + pinctrl-names = "default"; + pinctrl-0 = <¶llel_nand_pins>; + status = "disabled"; +}; + +&nor_flash { + pinctrl-names = "default"; + pinctrl-0 = <&spi_nor_pins>; + status = "disabled"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + }; +}; + &pcie { pinctrl-names = "default"; pinctrl-0 = <&pcie0_pins>; @@ -344,103 +441,6 @@ }; }; -&bch { - status = "disabled"; -}; - -&btif { - status = "okay"; -}; - -&cir { - pinctrl-names = "default"; - pinctrl-0 = <&irrx_pins>; - status = "okay"; -}; - -ð { - pinctrl-names = "default"; - pinctrl-0 = <ð_pins>; - status = "okay"; - - gmac1: mac@1 { - compatible = "mediatek,eth-mac"; - reg = <1>; - phy-handle = <&phy5>; - }; - - mdio-bus { - #address-cells = <1>; - #size-cells = <0>; - - phy5: ethernet-phy@5 { - reg = <5>; - phy-mode = "sgmii"; - }; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - status = "okay"; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - status = "okay"; -}; - -&mmc0 { - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&emmc_pins_default>; - pinctrl-1 = <&emmc_pins_uhs>; - status = "okay"; - bus-width = <8>; - max-frequency = <50000000>; - cap-mmc-highspeed; - mmc-hs200-1_8v; - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_1p8v>; - assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; - non-removable; -}; - -&mmc1 { - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&sd0_pins_default>; - pinctrl-1 = <&sd0_pins_uhs>; - status = "okay"; - bus-width = <4>; - max-frequency = <50000000>; - cap-sd-highspeed; - r_smpl = <1>; - cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>; - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_3p3v>; - assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; -}; - -&nandc { - pinctrl-names = "default"; - pinctrl-0 = <¶llel_nand_pins>; - status = "disabled"; -}; - -&nor_flash { - pinctrl-names = "default"; - pinctrl-0 = <&spi_nor_pins>; - status = "disabled"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm7_pins>; diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index de2c47bdbe64..fe0c875f1d95 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -79,6 +79,7 @@ #cooling-cells = <2>; enable-method = "psci"; clock-frequency = <1300000000>; + cci-control-port = <&cci_control2>; }; cpu1: cpu@1 { @@ -92,6 +93,7 @@ #cooling-cells = <2>; enable-method = "psci"; clock-frequency = <1300000000>; + cci-control-port = <&cci_control2>; }; }; @@ -113,6 +115,13 @@ method = "smc"; }; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -218,6 +227,16 @@ #reset-cells = <1>; }; + timer: timer@10004000 { + compatible = "mediatek,mt7622-timer", + "mediatek,mt6577-timer"; + reg = <0 0x10004000 0 0x80>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_APXGPT_PD>, + <&topckgen CLK_TOP_RTC>; + clock-names = "system-clk", "rtc-clk"; + }; + scpsys: scpsys@10006000 { compatible = "mediatek,mt7622-scpsys", "syscon"; @@ -325,6 +344,42 @@ <0 0x10360000 0 0x2000>; }; + cci: cci@10390000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x10390000 0 0x1000>; + ranges = <0 0 0x10390000 0x10000>; + + cci_control0: slave-if@1000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace-lite"; + reg = <0x1000 0x1000>; + }; + + cci_control1: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control2: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + + pmu@9000 { + compatible = "arm,cci-400-pmu,r1"; + reg = <0x9000 0x5000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + auxadc: adc@11001000 { compatible = "mediatek,mt7622-auxadc"; reg = <0 0x11001000 0 0x1000>; @@ -475,6 +530,13 @@ reg-shift = <2>; reg-io-width = <4>; status = "disabled"; + + bluetooth { + compatible = "mediatek,mt7622-bluetooth"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>; + clocks = <&clk25m>; + clock-names = "ref"; + }; }; nandc: nfi@1100d000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index b762227f6aa1..2f3c8e29520d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/tegra186-hsp.h> #include <dt-bindings/memory/tegra186-mc.h> +#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> #include <dt-bindings/power/tegra186-powergate.h> #include <dt-bindings/reset/tegra186-reset.h> #include <dt-bindings/thermal/tegra186-bpmp-thermal.h> @@ -236,6 +237,20 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA186_RESET_SDMMC1>; reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc1_3v3>; + pinctrl-1 = <&sdmmc1_1v8>; + nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>; + nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>; + nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>; + nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>; + nvidia,pad-autocal-pull-up-offset-sdr104 = <0x03>; + nvidia,pad-autocal-pull-down-offset-sdr104 = <0x05>; + nvidia,default-tap = <0x5>; + nvidia,default-trim = <0xb>; + assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC1>, + <&bpmp TEGRA186_CLK_PLLP_OUT0>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>; status = "disabled"; }; @@ -247,6 +262,15 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA186_RESET_SDMMC2>; reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc2_3v3>; + pinctrl-1 = <&sdmmc2_1v8>; + nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>; + nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>; + nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>; + nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>; + nvidia,default-tap = <0x5>; + nvidia,default-trim = <0xb>; status = "disabled"; }; @@ -258,6 +282,17 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA186_RESET_SDMMC3>; reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc3_3v3>; + pinctrl-1 = <&sdmmc3_1v8>; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>; + nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>; + nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>; + nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>; + nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>; + nvidia,default-tap = <0x5>; + nvidia,default-trim = <0xb>; status = "disabled"; }; @@ -267,8 +302,19 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA186_CLK_SDMMC4>; clock-names = "sdhci"; + assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC4>, + <&bpmp TEGRA186_CLK_PLLC4_VCO>; + assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>; resets = <&bpmp TEGRA186_RESET_SDMMC4>; reset-names = "sdhci"; + nvidia,pad-autocal-pull-up-offset-hs400 = <0x05>; + nvidia,pad-autocal-pull-down-offset-hs400 = <0x05>; + nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>; + nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>; + nvidia,default-tap = <0x5>; + nvidia,default-trim = <0x9>; + nvidia,dqs-trim = <63>; + mmc-hs400-1_8v; status = "disabled"; }; @@ -368,6 +414,36 @@ <0 0x0c380000 0 0x10000>, <0 0x0c390000 0 0x10000>; reg-names = "pmc", "wake", "aotag", "scratch"; + + sdmmc1_3v3: sdmmc1-3v3 { + pins = "sdmmc1-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc1_1v8: sdmmc1-1v8 { + pins = "sdmmc1-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; + + sdmmc2_3v3: sdmmc2-3v3 { + pins = "sdmmc2-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc2_1v8: sdmmc2-1v8 { + pins = "sdmmc2-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; + + sdmmc3_3v3: sdmmc3-3v3 { + pins = "sdmmc3-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc3_1v8: sdmmc3-1v8 { + pins = "sdmmc3-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; }; ccplex@e000000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index a4dfcd19b9e8..9fc14bb9a0af 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -118,7 +118,7 @@ }; gen1_i2c: i2c@3160000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x03160000 0x10000>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -143,7 +143,7 @@ }; cam_i2c: i2c@3180000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x03180000 0x10000>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -157,7 +157,7 @@ /* shares pads with dpaux1 */ dp_aux_ch1_i2c: i2c@3190000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x03190000 0x10000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -171,7 +171,7 @@ /* shares pads with dpaux0 */ dp_aux_ch0_i2c: i2c@31b0000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x031b0000 0x10000>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -184,7 +184,7 @@ }; gen7_i2c: i2c@31c0000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x031c0000 0x10000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -197,7 +197,7 @@ }; gen9_i2c: i2c@31e0000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x031e0000 0x10000>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -264,7 +264,7 @@ }; gen2_i2c: i2c@c240000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x0c240000 0x10000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -277,7 +277,7 @@ }; gen8_i2c: i2c@c250000 { - compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra194-i2c"; reg = <0x0c250000 0x10000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index 212e6634c9ba..053458a5db55 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -178,16 +178,7 @@ vddio_sdmmc: ldo2 { regulator-name = "VDDIO_SDMMC"; - /* - * Technically this supply should have - * a supported range from 1.8 - 3.3 V. - * However, that would cause the SDHCI - * driver to request 2.7 V upon access - * and that in turn will cause traffic - * to be broken. Leave it at 3.3 V for - * now. - */ - regulator-min-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; regulator-boot-on; @@ -282,6 +273,7 @@ status = "okay"; bus-width = <8>; non-removable; + vqmmc-supply = <&vdd_1v8>; }; clocks { diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index 9d5a0e6b2ca4..365726ddd418 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1452,7 +1452,6 @@ sdhci@700b0000 { status = "okay"; bus-width = <4>; - no-1-8-v; cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 3be920efee82..8fe47d6445a5 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/gpio/tegra-gpio.h> #include <dt-bindings/memory/tegra210-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> +#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/tegra124-soctherm.h> @@ -776,6 +777,26 @@ #power-domain-cells = <0>; }; }; + + sdmmc1_3v3: sdmmc1-3v3 { + pins = "sdmmc1"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc1_1v8: sdmmc1-1v8 { + pins = "sdmmc1"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; + + sdmmc3_3v3: sdmmc3-3v3 { + pins = "sdmmc3"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc3_1v8: sdmmc3-1v8 { + pins = "sdmmc3"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; }; fuse@7000f800 { @@ -1027,6 +1048,20 @@ clock-names = "sdhci"; resets = <&tegra_car 14>; reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc1_3v3>; + pinctrl-1 = <&sdmmc1_1v8>; + nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>; + nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>; + nvidia,default-tap = <0x2>; + nvidia,default-trim = <0x4>; + assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>, + <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>, + <&tegra_car TEGRA210_CLK_PLL_C4>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>; + assigned-clock-rates = <200000000>, <1000000000>, <1000000000>; status = "disabled"; }; @@ -1038,6 +1073,10 @@ clock-names = "sdhci"; resets = <&tegra_car 9>; reset-names = "sdhci"; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>; + nvidia,default-tap = <0x8>; + nvidia,default-trim = <0x0>; status = "disabled"; }; @@ -1049,6 +1088,15 @@ clock-names = "sdhci"; resets = <&tegra_car 69>; reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc3_3v3>; + pinctrl-1 = <&sdmmc3_1v8>; + nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>; + nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>; + nvidia,default-tap = <0x3>; + nvidia,default-trim = <0x3>; status = "disabled"; }; @@ -1060,6 +1108,15 @@ clock-names = "sdhci"; resets = <&tegra_car 15>; reset-names = "sdhci"; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>; + nvidia,default-tap = <0x8>; + nvidia,default-trim = <0x0>; + assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>, + <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>; + nvidia,dqs-trim = <40>; + mmc-hs400-1_8v; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 9319e74b8906..a658c07652a7 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -6,4 +6,5 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 78ce3979ef09..46feedf7c989 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -545,6 +545,20 @@ }; }; +&spmi_bus { + pm8916_0: pm8916@0 { + pon@800 { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + }; +}; + &wcd_codec { status = "okay"; clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 230e9c8484ac..da23bdafbd33 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -17,5 +17,5 @@ / { model = "Qualcomm Technologies, Inc. DB820c"; - compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc"; + compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096"; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 0ef90c6554a9..bf20c55a6bc4 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -623,3 +623,17 @@ }; }; }; + +&spmi_bus { + pmic@0 { + pon@800 { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 7b32b8990d62..d302d8d639a1 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -18,9 +18,6 @@ #include <dt-bindings/thermal/thermal.h> / { - model = "Qualcomm Technologies, Inc. MSM8916"; - compatible = "qcom,msm8916"; - interrupt-parent = <&intc>; #address-cells = <2>; @@ -1099,10 +1096,11 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - port { - tpiu_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out1>; + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; }; }; }; @@ -1114,7 +1112,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; @@ -1132,12 +1130,13 @@ port@4 { reg = <4>; funnel0_in4: endpoint { - slave-mode; remote-endpoint = <&funnel1_out>; }; }; - port@8 { - reg = <0>; + }; + + out-ports { + port { funnel0_out: endpoint { remote-endpoint = <&etf_in>; }; @@ -1152,7 +1151,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -1168,10 +1167,11 @@ remote-endpoint = <&tpiu_in>; }; }; - port@2 { - reg = <0>; + }; + + in-ports { + port { replicator_in: endpoint { - slave-mode; remote-endpoint = <&etf_out>; }; }; @@ -1185,19 +1185,16 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + in-ports { + port { etf_in: endpoint { - slave-mode; remote-endpoint = <&funnel0_out>; }; }; - port@1 { - reg = <0>; + }; + + out-ports { + port { etf_out: endpoint { remote-endpoint = <&replicator_in>; }; @@ -1212,10 +1209,11 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - port { - etr_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out0>; + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; }; }; }; @@ -1227,40 +1225,38 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; funnel1_in0: endpoint { - slave-mode; remote-endpoint = <&etm0_out>; }; }; port@1 { reg = <1>; funnel1_in1: endpoint { - slave-mode; remote-endpoint = <&etm1_out>; }; }; port@2 { reg = <2>; funnel1_in2: endpoint { - slave-mode; remote-endpoint = <&etm2_out>; }; }; port@3 { reg = <3>; funnel1_in3: endpoint { - slave-mode; remote-endpoint = <&etm3_out>; }; }; - port@4 { - reg = <0>; + }; + + out-ports { + port { funnel1_out: endpoint { remote-endpoint = <&funnel0_in4>; }; @@ -1309,9 +1305,11 @@ cpu = <&CPU0>; - port { - etm0_out: endpoint { - remote-endpoint = <&funnel1_in0>; + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&funnel1_in0>; + }; }; }; }; @@ -1325,9 +1323,11 @@ cpu = <&CPU1>; - port { - etm1_out: endpoint { - remote-endpoint = <&funnel1_in1>; + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&funnel1_in1>; + }; }; }; }; @@ -1341,9 +1341,11 @@ cpu = <&CPU2>; - port { - etm2_out: endpoint { - remote-endpoint = <&funnel1_in2>; + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&funnel1_in2>; + }; }; }; }; @@ -1357,9 +1359,11 @@ cpu = <&CPU3>; - port { - etm3_out: endpoint { - remote-endpoint = <&funnel1_in3>; + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&funnel1_in3>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index cd3865e7a270..b29fe80d7288 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -16,8 +16,6 @@ #include <dt-bindings/clock/qcom,rpmcc.h> / { - model = "Qualcomm Technologies, Inc. MSM8996"; - interrupt-parent = <&intc>; #address-cells = <2>; @@ -409,11 +407,6 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; - apcs: syscon@9820000 { - compatible = "syscon"; - reg = <0x9820000 0x1000>; - }; - apcs_glb: mailbox@9820000 { compatible = "qcom,msm8996-apcs-hmss-global"; reg = <0x9820000 0x1000>; @@ -1140,7 +1133,7 @@ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; label = "lpass"; - qcom,ipc = <&apcs 16 8>; + mboxes = <&apcs_glb 8>; qcom,smd-edge = <1>; qcom,remote-pid = <2>; }; @@ -1152,7 +1145,7 @@ interrupts = <0 158 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 16 10>; + mboxes = <&apcs_glb 10>; qcom,local-pid = <0>; qcom,remote-pid = <2>; @@ -1176,7 +1169,7 @@ interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 16 14>; + mboxes = <&apcs_glb 14>; qcom,local-pid = <0>; qcom,remote-pid = <1>; @@ -1200,7 +1193,7 @@ interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 16 26>; + mboxes = <&apcs_glb 26>; qcom,local-pid = <0>; qcom,remote-pid = <3>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts new file mode 100644 index 000000000000..66540d2ca13b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ + +/dts-v1/; + +#include "msm8998-mtp.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. MSM8998 v1 MTP"; + compatible = "qcom,msm8998-mtp"; + + qcom,board-id = <8 0>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi new file mode 100644 index 000000000000..b4276da1fb0d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -0,0 +1,243 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ + +#include "msm8998.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" +#include "pm8005.dtsi" + +/ { + aliases { + serial0 = &blsp2_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + thermal-zones { + battery-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + battery_crit: trip0 { + temperature = <60000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + skin-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + skin_alert: trip0 { + temperature = <44000>; + hysteresis = <2000>; + type = "passive"; + }; + + skip_crit: trip1 { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&blsp2_uart1 { + status = "okay"; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <1808000>; + }; + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l14a_1p88: l14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + }; + vreg_15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + vreg_l18a_2p7: l18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l19a_3p0: l19 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l22a_2p85: l22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <2864000>; + }; + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + }; + + pmi8998-regulators { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi new file mode 100644 index 000000000000..78227cce16db --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -0,0 +1,690 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-msm8998.h> + +/ { + interrupt-parent = <&intc>; + + qcom,msm-id = <292 0x0>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + memory@85800000 { + reg = <0x0 0x85800000 0x0 0x800000>; + no-map; + }; + + smem_mem: smem-mem@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; + }; + + memory@86200000 { + reg = <0x0 0x86200000 0x0 0x2600000>; + no-map; + }; + + rmtfs { + compatible = "qcom,rmtfs-mem"; + + size = <0x0 0x200000>; + alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + }; + + clocks { + xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + efficiency = <1024>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "arm,arch-cache"; + cache-level = <2>; + }; + L1_I_0: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_0: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + efficiency = <1024>; + next-level-cache = <&L2_0>; + L1_I_1: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_1: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + efficiency = <1024>; + next-level-cache = <&L2_0>; + L1_I_2: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_2: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + efficiency = <1024>; + next-level-cache = <&L2_0>; + L1_I_3: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_3: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "psci"; + efficiency = <1536>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "arm,arch-cache"; + cache-level = <2>; + }; + L1_I_100: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_100: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "psci"; + efficiency = <1536>; + next-level-cache = <&L2_1>; + L1_I_101: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_101: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x102>; + enable-method = "psci"; + efficiency = <1536>; + next-level-cache = <&L2_1>; + L1_I_102: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_102: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x103>; + enable-method = "psci"; + efficiency = <1536>; + next-level-cache = <&L2_1>; + L1_I_103: l1-icache { + compatible = "arm,arch-cache"; + }; + L1_D_103: l1-dcache { + compatible = "arm,arch-cache"; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-msm8998"; + }; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x1000>; + #hwlock-cells = <1>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8998"; + qcom,glink-channels = "rpm_requests"; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs_glb 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs_glb 26>; + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal4 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu_alert4: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit4: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal5 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu_alert5: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit5: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal6 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + cpu_alert6: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit6: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal7 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + cpu_alert7: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit7: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + rpm_msg_ram: memory@68000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x778000 0x7000>; + }; + + qfprom: qfprom@780000 { + compatible = "qcom,qfprom"; + reg = <0x780000 0x621c>; + #address-cells = <1>; + #size-cells = <1>; + }; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-msm8998"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x100000 0xb0000>; + }; + + tlmm: pinctrl@3400000 { + compatible = "qcom,msm8998-pinctrl"; + reg = <0x3400000 0xc00000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <0x2>; + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + spmi_bus: spmi@800f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x800f000 0x1000>, + <0x8400000 0x1000000>, + <0x9400000 0x1000000>, + <0xa400000 0x220000>, + <0x800a000 0x3000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + tsens0: thermal@10aa000 { + compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; + reg = <0x10aa000 0x2000>; + + #qcom,sensors = <12>; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal@10ad000 { + compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; + reg = <0x10ad000 0x2000>; + + #qcom,sensors = <8>; + #thermal-sensor-cells = <1>; + }; + + tcsr_mutex_regs: syscon@1f40000 { + compatible = "syscon"; + reg = <0x1f40000 0x20000>; + }; + + apcs_glb: mailbox@9820000 { + compatible = "qcom,msm8998-apcs-hmss-global"; + reg = <0x17911000 0x1000>; + + #mbox-cells = <1>; + }; + + blsp2_uart1: serial@c1b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xc1b0000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + timer@17920000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x17920000 0x1000>; + + frame@17921000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17921000 0x1000>, + <0x17922000 0x1000>; + }; + + frame@17923000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17923000 0x1000>; + status = "disabled"; + }; + + frame@17924000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17924000 0x1000>; + status = "disabled"; + }; + + frame@17925000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17925000 0x1000>; + status = "disabled"; + }; + + frame@17926000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17926000 0x1000>; + status = "disabled"; + }; + + frame@17927000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17927000 0x1000>; + status = "disabled"; + }; + + frame@17928000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17928000 0x1000>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + reg = <0x17a00000 0x10000>, /* GICD */ + <0x17b00000 0x100000>; /* GICR * 8 */ + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index 196b1c0ceb9b..15a37cbcd216 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/spmi/spmi.h> &spmi_bus { @@ -18,12 +19,19 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; - pwrkey@800 { - compatible = "qcom,pm8941-pwrkey"; + pon@800 { + compatible = "qcom,pm8916-pon"; reg = <0x800>; - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; }; pm8916_gpios: gpios@c000 { diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index 80024c0b1c7c..76b5a3e6a2b5 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/input/linux-event-codes.h> &spmi_bus { @@ -17,6 +18,23 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; + pon@800 { + compatible = "qcom,pm8916-pon"; + + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + }; + pm8994_gpios: gpios@c000 { compatible = "qcom,pm8994-gpio"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 92bed1e7d4bb..048f19fa0150 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -1,8 +1,35 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* Copyright 2018 Google LLC. */ -#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + thermal-zones { + pm8998 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pm8998_temp>; + + trips { + pm8998_alert0: pm8998-alert0 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + pm8998_crit: pm8998-crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; &spmi_bus { pm8998_lsid0: pmic@0 { @@ -11,6 +38,52 @@ #address-cells = <1>; #size-cells = <0>; + pm8998_pon: pon@800 { + compatible = "qcom,pm8916-pon"; + + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + }; + + pm8998_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; + }; + + pm8998_coincell: coincell@2800 { + compatible = "qcom,pm8941-coincell"; + reg = <0x2800>; + + status = "disabled"; + }; + + pm8998_adc: adc@3100 { + compatible = "qcom,spmi-adc-rev2"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + pm8998_gpio: gpios@c000 { compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi new file mode 100644 index 000000000000..da3285e216e2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmi8998_lsid0: pmic@2 { + compatible = "qcom,pmi8998", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmi8998_gpio: gpios@c000 { + compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>, + <0 0xc4 0 IRQ_TYPE_NONE>, + <0 0xc5 0 IRQ_TYPE_NONE>, + <0 0xc6 0 IRQ_TYPE_NONE>, + <0 0xc7 0 IRQ_TYPE_NONE>, + <0 0xc8 0 IRQ_TYPE_NONE>, + <0 0xc9 0 IRQ_TYPE_NONE>, + <0 0xca 0 IRQ_TYPE_NONE>, + <0 0xcb 0 IRQ_TYPE_NONE>, + <0 0xcc 0 IRQ_TYPE_NONE>, + <0 0xcd 0 IRQ_TYPE_NONE>; + }; + }; + + pmi8998_lsid1: pmic@3 { + compatible = "qcom,pmi8998", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 6d651f314193..eedfaf8922e2 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -7,6 +7,7 @@ /dts-v1/; +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sdm845.dtsi" / { @@ -20,6 +21,326 @@ chosen { stdout-path = "serial0:115200n8"; }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p125: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p8: ldo9 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_1p0: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p7: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22a_2p85: ldo22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; + + pm8005-rpmh-regulators { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; }; &i2c10 { @@ -35,6 +356,67 @@ status = "okay"; }; +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* Until we have Type C hooked up we'll force this as host. */ + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + /* + * Though the USB block on SDM845 can support host, there's no vbus + * signal for this port on MTP. Thus (unless you have a non-compliant + * hub that works without vbus) the only sensible thing is to force + * peripheral mode. + */ + dr_mode = "peripheral"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb2_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; +}; + /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_i2c10_default { diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 0c9a2aa6a1b5..b72bdb0a31a5 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -5,9 +5,12 @@ * Copyright (c) 2018, The Linux Foundation. All rights reserved. */ +#include <dt-bindings/clock/qcom,dispcc-sdm845.h> #include <dt-bindings/clock/qcom,gcc-sdm845.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy-qcom-qusb2.h> +#include <dt-bindings/reset/qcom,sdm845-aoss.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> / { @@ -230,6 +233,94 @@ hwlocks = <&tcsr_mutex 3>; }; + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + + interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 6>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 26>; + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -249,6 +340,23 @@ #power-domain-cells = <1>; }; + qfprom@784000 { + compatible = "qcom,qfprom"; + reg = <0x784000 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2p_hstx_trim: hstx-trim-primary@1eb { + reg = <0x1eb 0x1>; + bits = <1 4>; + }; + + qusb2s_hstx_trim: hstx-trim-secondary@1eb { + reg = <0x1eb 0x2>; + bits = <6 4>; + }; + }; + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x8c0000 0x6000>; @@ -962,6 +1070,192 @@ }; }; + usb_1_hsphy: phy@88e2000 { + compatible = "qcom,sdm845-qusb2-phy"; + reg = <0x88e2000 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + nvmem-cells = <&qusb2p_hstx_trim>; + }; + + usb_2_hsphy: phy@88e3000 { + compatible = "qcom,sdm845-qusb2-phy"; + reg = <0x88e3000 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + + nvmem-cells = <&qusb2s_hstx_trim>; + }; + + usb_1_qmpphy: phy@88e9000 { + compatible = "qcom,sdm845-qmp-usb3-phy"; + reg = <0x88e9000 0x18c>, + <0x88e8000 0x10>; + reg-names = "reg-base", "dp_com"; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: lane@88e9200 { + reg = <0x88e9200 0x128>, + <0x88e9400 0x200>, + <0x88e9c00 0x218>, + <0x88e9a00 0x100>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + usb_2_qmpphy: phy@88eb000 { + compatible = "qcom,sdm845-qmp-usb3-uni-phy"; + reg = <0x88eb000 0x18c>; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + usb_2_ssphy: lane@88eb200 { + reg = <0x88eb200 0x128>, + <0x88eb400 0x1fc>, + <0x88eb800 0x218>, + <0x88e9600 0x70>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; + reg = <0xa6f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: dwc3@a600000 { + compatible = "snps,dwc3"; + reg = <0xa600000 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_2: usb@a8f8800 { + compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; + reg = <0xa8f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + usb_2_dwc3: dwc3@a800000 { + compatible = "snps,dwc3"; + reg = <0xa800000 0xcd00>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sdm845-dispcc"; + reg = <0xaf00000 0x10000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + tsens0: thermal-sensor@c263000 { compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; reg = <0xc263000 0x1ff>, /* TM */ @@ -978,6 +1272,12 @@ #thermal-sensor-cells = <1>; }; + aoss_reset: reset-controller@c2a0000 { + compatible = "qcom,sdm845-aoss-cc"; + reg = <0xc2a0000 0x31000>; + #reset-cells = <1>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0xc440000 0x1100>, diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 9e2394bc3c62..a8ce6594342d 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -8,6 +8,8 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb.dtb +dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb r8a77980-v3hsk.dtb dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi new file mode 100644 index 000000000000..012cbb64246e --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -0,0 +1,1663 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the r8a774a1 SoC + * + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/renesas-cpg-mssr.h> + +/ { + compatible = "renesas,r8a774a1"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c_dvfs; + }; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a57_0: cpu@0 { + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x0>; + device_type = "cpu"; + power-domains = <&sysc 0>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE 0>; + }; + + a57_1: cpu@1 { + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x1>; + device_type = "cpu"; + power-domains = <&sysc 1>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE 0>; + }; + + a53_0: cpu@100 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x100>; + device_type = "cpu"; + power-domains = <&sysc 5>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks =<&cpg CPG_CORE 1>; + }; + + a53_1: cpu@101 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x101>; + device_type = "cpu"; + power-domains = <&sysc 6>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks =<&cpg CPG_CORE 1>; + }; + + a53_2: cpu@102 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x102>; + device_type = "cpu"; + power-domains = <&sysc 7>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks =<&cpg CPG_CORE 1>; + }; + + a53_3: cpu@103 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x103>; + device_type = "cpu"; + power-domains = <&sysc 8>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks =<&cpg CPG_CORE 1>; + }; + + L2_CA57: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc 12>; + cache-unified; + cache-level = <2>; + }; + + L2_CA53: cache-controller-1 { + compatible = "cache"; + power-domains = <&sysc 21>; + cache-unified; + cache-level = <2>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; + }; + + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, <&a57_1>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a774a1-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc 32>; + resets = <&cpg 402>; + status = "disabled"; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc 32>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 29>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc 32>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 15>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc 32>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc 32>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 18>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc 32>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc 32>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 906>; + power-domains = <&sysc 32>; + resets = <&cpg 906>; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a774a1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 4>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc 32>; + resets = <&cpg 905>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a774a1"; + reg = <0 0xe6060000 0 0x50c>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a774a1-cpg-mssr"; + reg = <0 0xe6150000 0 0x0bb0>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a774a1-rst"; + reg = <0 0xe6160000 0 0x018c>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a774a1-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + tsc: thermal@e6198000 { + compatible = "renesas,r8a774a1-thermal"; + reg = <0 0xe6198000 0 0x100>, + <0 0xe61a0000 0 0x100>, + <0 0xe61a8000 0 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc 32>; + resets = <&cpg 522>; + #thermal-sensor-cells = <1>; + }; + + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a774a1", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc 32>; + resets = <&cpg 407>; + }; + + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc 32>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc 32>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc 32>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc 32>; + resets = <&cpg 928>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc 32>; + resets = <&cpg 927>; + dmas = <&dmac0 0x99>, <&dmac0 0x98>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc 32>; + resets = <&cpg 919>; + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774a1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc 32>; + resets = <&cpg 918>; + dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a774a1", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc 32>; + resets = <&cpg 926>; + dmas = <&dmac0 0x11>, <&dmac0 0x10>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a774a1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a774a1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a774a1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a774a1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 517>; + status = "disabled"; + }; + + hscif4: serial@e66b0000 { + compatible = "renesas,hscif-r8a774a1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66b0000 0 0x60>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x38>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 516>; + status = "disabled"; + }; + + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a774a1", + "renesas,rcar-gen3-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + renesas,buswait = <11>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc 32>; + resets = <&cpg 704>; + status = "disabled"; + }; + + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a774a1-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc 32>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a774a1-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc 32>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb3_phy0: usb-phy@e65ee000 { + compatible = "renesas,r8a774a1-usb3-phy", + "renesas,rcar-gen3-usb3-phy"; + reg = <0 0xe65ee000 0 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, + <&usb_extal_clk>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + power-domains = <&sysc 32>; + resets = <&cpg 328>; + #phy-cells = <0>; + status = "disabled"; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a774a1", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a774a1", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a774a1", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_mp: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 5>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_pv1: mmu@fd950000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xfd950000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 8>; + power-domains = <&sysc 14>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a774a1"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 9>; + power-domains = <&sysc 32>; + #iommu-cells = <1>; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a774a1", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc 32>; + resets = <&cpg 812>; + phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc 32>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a774a1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a774a1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a774a1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e88000 0 0x40>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc 32>; + resets = <&cpg 310>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a774a1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a774a1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a774a1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 0x40>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 202>; + status = "disabled"; + }; + + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a774a1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>, + <&dmac2 0x41>, <&dmac2 0x40>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a774a1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>, + <&dmac2 0x43>, <&dmac2 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a774a1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a774a1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a774a1", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE 10>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc 32>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,src { + src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + }; + }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a774a1", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a774a1", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + xhci0: usb@ee000000 { + compatible = "renesas,xhci-r8a774a1", + "renesas,rcar-gen3-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc 32>; + resets = <&cpg 328>; + status = "disabled"; + }; + + usb3_peri0: usb@ee020000 { + compatible = "renesas,r8a774a1-usb3-peri", + "renesas,rcar-gen3-usb3-peri"; + reg = <0 0xee020000 0 0x400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc 32>; + resets = <&cpg 328>; + status = "disabled"; + }; + + ohci0: usb@ee080000 { + compatible = "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc 32>; + resets = <&cpg 703>; + status = "disabled"; + }; + + ohci1: usb@ee0a0000 { + compatible = "generic-ohci"; + reg = <0 0xee0a0000 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&sysc 32>; + resets = <&cpg 702>; + status = "disabled"; + }; + + ehci0: usb@ee080100 { + compatible = "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&sysc 32>; + resets = <&cpg 703>; + status = "disabled"; + }; + + ehci1: usb@ee0a0100 { + compatible = "generic-ehci"; + reg = <0 0xee0a0100 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&sysc 32>; + resets = <&cpg 702>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a774a1", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee080200 0 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc 32>; + resets = <&cpg 703>; + #phy-cells = <0>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@ee0a0200 { + compatible = "renesas,usb2-phy-r8a774a1", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee0a0200 0 0x700>; + clocks = <&cpg CPG_MOD 702>; + power-domains = <&sysc 32>; + resets = <&cpg 702>; + #phy-cells = <0>; + status = "disabled"; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a774a1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee100000 0 0x2000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + max-frequency = <200000000>; + power-domains = <&sysc 32>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a774a1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee120000 0 0x2000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + max-frequency = <200000000>; + power-domains = <&sysc 32>; + resets = <&cpg 313>; + status = "disabled"; + }; + + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a774a1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + max-frequency = <200000000>; + power-domains = <&sysc 32>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a774a1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee160000 0 0x2000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + max-frequency = <200000000>; + power-domains = <&sysc 32>; + resets = <&cpg 311>; + status = "disabled"; + }; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc 32>; + resets = <&cpg 408>; + }; + + fcpf0: fcp@fe950000 { + compatible = "renesas,fcpf"; + reg = <0 0xfe950000 0 0x200>; + clocks = <&cpg CPG_MOD 615>; + power-domains = <&sysc 14>; + resets = <&cpg 615>; + }; + + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc 14>; + resets = <&cpg 607>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc 32>; + resets = <&cpg 603>; + iommus = <&ipmmu_vi0 8>; + }; + + fcpvd1: fcp@fea2f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea2f000 0 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc 32>; + resets = <&cpg 602>; + iommus = <&ipmmu_vi0 9>; + }; + + fcpvd2: fcp@fea37000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea37000 0 0x200>; + clocks = <&cpg CPG_MOD 601>; + power-domains = <&sysc 32>; + resets = <&cpg 601>; + iommus = <&ipmmu_vi0 10>; + }; + + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc 14>; + resets = <&cpg 611>; + iommus = <&ipmmu_vc0 19>; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal2: sensor-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + }; + + sensor_thermal3: sensor-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + + trips { + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts index 6b5fa91f1d5d..0895503b69d0 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts @@ -40,12 +40,11 @@ <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>, - <&cpg CPG_MOD 727>, <&versaclock5 1>, <&x21_clk>, <&x22_clk>, <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0", + clock-names = "du.0", "du.1", "du.2", "du.3", "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi index 7b2fbaec9aef..0fb84c219b2f 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7795 ES1.x SoC + * Device Tree Source for the R-Car H3 (R8A77950) ES1.x SoC * * Copyright (C) 2015 Renesas Electronics Corp. */ @@ -232,7 +232,7 @@ port@1 { vin0csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin0>; + remote-endpoint = <&csi21vin0>; }; }; }; @@ -243,7 +243,7 @@ port@1 { vin1csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin1>; + remote-endpoint = <&csi21vin1>; }; }; }; @@ -254,7 +254,7 @@ port@1 { vin2csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin2>; + remote-endpoint = <&csi21vin2>; }; }; }; @@ -265,7 +265,7 @@ port@1 { vin3csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin3>; + remote-endpoint = <&csi21vin3>; }; }; }; @@ -276,7 +276,7 @@ port@1 { vin4csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin4>; + remote-endpoint = <&csi21vin4>; }; }; }; @@ -287,7 +287,7 @@ port@1 { vin5csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin5>; + remote-endpoint = <&csi21vin5>; }; }; }; @@ -298,7 +298,7 @@ port@1 { vin6csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin6>; + remote-endpoint = <&csi21vin6>; }; }; }; @@ -309,7 +309,7 @@ port@1 { vin7csi21: endpoint@1 { reg = <1>; - remote-endpoint= <&csi21vin7>; + remote-endpoint = <&csi21vin7>; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts index df50bf46406e..54515eaf0310 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts @@ -41,11 +41,10 @@ <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>, - <&cpg CPG_MOD 727>, <&versaclock5 1>, <&versaclock5 3>, <&versaclock5 4>, <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0", + clock-names = "du.0", "du.1", "du.2", "du.3", "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index 446822f5751c..1620e8d8dacc 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -40,12 +40,11 @@ <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>, - <&cpg CPG_MOD 727>, <&versaclock5 1>, <&x21_clk>, <&x22_clk>, <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0", + clock-names = "du.0", "du.1", "du.2", "du.3", "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts index 8ded64d0a4d5..cf08a119eec0 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts @@ -40,12 +40,11 @@ <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>, - <&cpg CPG_MOD 727>, <&versaclock6 1>, <&x21_clk>, <&x22_clk>, <&versaclock6 2>; - clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0", + clock-names = "du.0", "du.1", "du.2", "du.3", "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; }; @@ -152,6 +151,15 @@ }; }; +&pca9654 { + pcie_sata_switch { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-low; /* enable SATA by default */ + line-name = "PCIE/SATA switch"; + }; +}; + &pfc { usb2_pins: usb2 { groups = "usb2"; @@ -176,6 +184,11 @@ }; }; +/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ +&sata { + status = "okay"; +}; + &usb2_phy2 { pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index fb9d08ad7659..b5f2273caca4 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7795 SoC + * Device Tree Source for the R-Car H3 (R8A77950) SoC * * Copyright (C) 2015 Renesas Electronics Corp. */ @@ -123,7 +123,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -135,7 +135,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -147,7 +147,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU2>; next-level-cache = <&L2_CA57>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -159,7 +159,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU3>; next-level-cache = <&L2_CA57>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -171,7 +171,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -182,7 +182,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -193,7 +193,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU2>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -204,7 +204,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU3>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -455,7 +455,6 @@ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 522>; #thermal-sensor-cells = <1>; - status = "okay"; }; intc_ex: interrupt-controller@e61c0000 { @@ -525,15 +524,6 @@ status = "disabled"; }; - arm_cc630p: crypto@e6601000 { - compatible = "arm,cryptocell-630p-ree"; - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x0 0xe6601000 0 0x1000>; - clocks = <&cpg CPG_MOD 229>; - resets = <&cpg 229>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - }; - i2c3: i2c@e66d0000 { #address-cells = <1>; #size-cells = <0>; @@ -707,7 +697,7 @@ "renesas,rcar-gen3-usbhs"; reg = <0 0xe6590000 0 0x100>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 704>; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; @@ -715,7 +705,7 @@ phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 704>; + resets = <&cpg 704>, <&cpg 703>; status = "disabled"; }; @@ -724,7 +714,7 @@ "renesas,rcar-gen3-usbhs"; reg = <0 0xe659c000 0 0x100>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 705>; + clocks = <&cpg CPG_MOD 705>, <&cpg CPG_MOD 700>; dmas = <&usb_dmac2 0>, <&usb_dmac2 1>, <&usb_dmac3 0>, <&usb_dmac3 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; @@ -732,7 +722,7 @@ phys = <&usb2_phy3>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 705>; + resets = <&cpg 705>, <&cpg 700>; status = "disabled"; }; @@ -805,6 +795,15 @@ status = "disabled"; }; + arm_cc630p: crypto@e6601000 { + compatible = "arm,cryptocell-630p-ree"; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0xe6601000 0 0x1000>; + clocks = <&cpg CPG_MOD 229>; + resets = <&cpg 229>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7795", "renesas,rcar-dmac"; @@ -1425,11 +1424,11 @@ vin0csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin0>; + remote-endpoint = <&csi20vin0>; }; vin0csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin0>; + remote-endpoint = <&csi40vin0>; }; }; }; @@ -1457,11 +1456,11 @@ vin1csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin1>; + remote-endpoint = <&csi20vin1>; }; vin1csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin1>; + remote-endpoint = <&csi40vin1>; }; }; }; @@ -1489,11 +1488,11 @@ vin2csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin2>; + remote-endpoint = <&csi20vin2>; }; vin2csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin2>; + remote-endpoint = <&csi40vin2>; }; }; }; @@ -1521,11 +1520,11 @@ vin3csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin3>; + remote-endpoint = <&csi20vin3>; }; vin3csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin3>; + remote-endpoint = <&csi40vin3>; }; }; }; @@ -1553,11 +1552,11 @@ vin4csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin4>; + remote-endpoint = <&csi20vin4>; }; vin4csi41: endpoint@3 { reg = <3>; - remote-endpoint= <&csi41vin4>; + remote-endpoint = <&csi41vin4>; }; }; }; @@ -1585,11 +1584,11 @@ vin5csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin5>; + remote-endpoint = <&csi20vin5>; }; vin5csi41: endpoint@3 { reg = <3>; - remote-endpoint= <&csi41vin5>; + remote-endpoint = <&csi41vin5>; }; }; }; @@ -1617,11 +1616,11 @@ vin6csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin6>; + remote-endpoint = <&csi20vin6>; }; vin6csi41: endpoint@3 { reg = <3>; - remote-endpoint= <&csi41vin6>; + remote-endpoint = <&csi41vin6>; }; }; }; @@ -1649,11 +1648,11 @@ vin7csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin7>; + remote-endpoint = <&csi20vin7>; }; vin7csi41: endpoint@3 { reg = <3>; - remote-endpoint= <&csi41vin7>; + remote-endpoint = <&csi41vin7>; }; }; }; @@ -2098,11 +2097,11 @@ compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -2134,11 +2133,11 @@ compatible = "generic-ohci"; reg = <0 0xee0e0000 0 0x100>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 700>; + clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; phys = <&usb2_phy3>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 700>; + resets = <&cpg 700>, <&cpg 705>; status = "disabled"; }; @@ -2146,12 +2145,12 @@ compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -2185,12 +2184,12 @@ compatible = "generic-ehci"; reg = <0 0xee0e0100 0 0x100>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 700>; + clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; phys = <&usb2_phy3>; phy-names = "usb"; companion = <&ohci3>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 700>; + resets = <&cpg 700>, <&cpg 705>; status = "disabled"; }; @@ -2199,9 +2198,9 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; #phy-cells = <0>; status = "disabled"; }; @@ -2233,9 +2232,9 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee0e0200 0 0x700>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 700>; + clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 700>; + resets = <&cpg 700>, <&cpg 705>; #phy-cells = <0>; status = "disabled"; }; @@ -2782,9 +2781,7 @@ du: display@feb00000 { compatible = "renesas,du-r8a7795"; - reg = <0 0xfeb00000 0 0x80000>, - <0 0xfeb90000 0 0x14>; - reg-names = "du", "lvds.0"; + reg = <0 0xfeb00000 0 0x80000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, @@ -2792,9 +2789,8 @@ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 721>, - <&cpg CPG_MOD 727>; - clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0"; + <&cpg CPG_MOD 721>; + clock-names = "du.0", "du.1", "du.2", "du.3"; vsps = <&vspd0 0 &vspd1 0 &vspd2 0 &vspd0 1>; status = "disabled"; @@ -2822,6 +2818,33 @@ port@3 { reg = <3>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a7795-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts index cbd8acbf537e..9e4594c27fa6 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts @@ -30,10 +30,9 @@ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 727>, <&versaclock5 1>, <&versaclock5 3>, <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", "lvds.0", + clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1", "dclkin.2"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index 052d72acc862..b4f9567cb9f8 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -29,11 +29,10 @@ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 727>, <&versaclock5 1>, <&x21_clk>, <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", "lvds.0", + clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1", "dclkin.2"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index cbd35c00b4af..1ec6aaa520c1 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7796 SoC + * Device Tree Source for the R-Car M3-W (R8A77960) SoC * * Copyright (C) 2016-2017 Renesas Electronics Corp. */ @@ -134,7 +134,7 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7796_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7796_CLK_Z>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -146,7 +146,7 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7796_CLK_Z>; + clocks = <&cpg CPG_CORE R8A7796_CLK_Z>; operating-points-v2 = <&cluster0_opp>; #cooling-cells = <2>; }; @@ -158,7 +158,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -169,7 +169,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -180,7 +180,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU2>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -191,7 +191,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU3>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -434,7 +434,6 @@ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 522>; #thermal-sensor-cells = <1>; - status = "okay"; }; intc_ex: interrupt-controller@e61c0000 { @@ -677,7 +676,7 @@ "renesas,rcar-gen3-usbhs"; reg = <0 0xe6590000 0 0x100>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 704>; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; @@ -685,7 +684,7 @@ phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; - resets = <&cpg 704>; + resets = <&cpg 704>, <&cpg 703>; status = "disabled"; }; @@ -1299,11 +1298,11 @@ vin0csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin0>; + remote-endpoint = <&csi20vin0>; }; vin0csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin0>; + remote-endpoint = <&csi40vin0>; }; }; }; @@ -1331,11 +1330,11 @@ vin1csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin1>; + remote-endpoint = <&csi20vin1>; }; vin1csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin1>; + remote-endpoint = <&csi40vin1>; }; }; }; @@ -1363,11 +1362,11 @@ vin2csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin2>; + remote-endpoint = <&csi20vin2>; }; vin2csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin2>; + remote-endpoint = <&csi40vin2>; }; }; }; @@ -1395,11 +1394,11 @@ vin3csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin3>; + remote-endpoint = <&csi20vin3>; }; vin3csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin3>; + remote-endpoint = <&csi40vin3>; }; }; }; @@ -1427,11 +1426,11 @@ vin4csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin4>; + remote-endpoint = <&csi20vin4>; }; vin4csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin4>; + remote-endpoint = <&csi40vin4>; }; }; }; @@ -1459,11 +1458,11 @@ vin5csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin5>; + remote-endpoint = <&csi20vin5>; }; vin5csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin5>; + remote-endpoint = <&csi40vin5>; }; }; }; @@ -1491,11 +1490,11 @@ vin6csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin6>; + remote-endpoint = <&csi20vin6>; }; vin6csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin6>; + remote-endpoint = <&csi40vin6>; }; }; }; @@ -1523,11 +1522,11 @@ vin7csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin7>; + remote-endpoint = <&csi20vin7>; }; vin7csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin7>; + remote-endpoint = <&csi40vin7>; }; }; }; @@ -1970,11 +1969,11 @@ compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -1994,12 +1993,12 @@ compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; - companion= <&ohci0>; + companion = <&ohci0>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -2010,7 +2009,7 @@ clocks = <&cpg CPG_MOD 702>; phys = <&usb2_phy1>; phy-names = "usb"; - companion= <&ohci1>; + companion = <&ohci1>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 702>; status = "disabled"; @@ -2021,9 +2020,9 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; #phy-cells = <0>; status = "disabled"; }; @@ -2437,17 +2436,14 @@ du: display@feb00000 { compatible = "renesas,du-r8a7796"; - reg = <0 0xfeb00000 0 0x70000>, - <0 0xfeb90000 0 0x14>; - reg-names = "du", "lvds.0"; + reg = <0 0xfeb00000 0 0x70000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 727>; - clock-names = "du.0", "du.1", "du.2", "lvds.0"; + <&cpg CPG_MOD 722>; + clock-names = "du.0", "du.1", "du.2"; status = "disabled"; vsps = <&vspd0 &vspd1 &vspd2>; @@ -2470,6 +2466,33 @@ port@2 { reg = <2>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a7796-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts new file mode 100644 index 000000000000..dadad97051b9 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the M3NULCB Kingfisher board + * + * Copyright (C) 2018 Renesas Electronics Corp. + * Copyright (C) 2018 Cogent Embedded, Inc. + */ + +#include "r8a77965-m3nulcb.dts" +#include "ulcb-kf.dtsi" + +/ { + model = "Renesas M3NULCB Kingfisher board based on r8a77965"; + compatible = "shimafuji,kingfisher", "renesas,m3nulcb", + "renesas,r8a77965"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts b/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts new file mode 100644 index 000000000000..964078b6cc49 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the M3NULCB (R-Car Starter Kit Pro) board + * + * Copyright (C) 2018 Renesas Electronics Corp. + * Copyright (C) 2018 Cogent Embedded, Inc. + */ + +/dts-v1/; +#include "r8a77965.dtsi" +#include "ulcb.dtsi" + +/ { + model = "Renesas M3NULCB board based on r8a77965"; + compatible = "renesas,m3nulcb", "renesas,r8a77965"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>, + <&versaclock5 1>, + <&versaclock5 3>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.3", + "dclkin.0", "dclkin.1", "dclkin.3"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts index 9de4e3db1621..f03a5e9e0c42 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts @@ -47,3 +47,17 @@ &hdmi0_con { remote-endpoint = <&rcar_dw_hdmi0_out>; }; + +&pca9654 { + pcie_sata_switch { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-low; /* enable SATA by default */ + line-name = "PCIE/SATA switch"; + }; +}; + +/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ +&sata { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 0cd44461a0bd..83946ca2eba5 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a77965 SoC + * Device Tree Source for the R-Car M3-N (R8A77965) SoC * * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org> * @@ -12,7 +12,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/r8a77965-sysc.h> -#define CPG_AUDIO_CLK_I 10 +#define CPG_AUDIO_CLK_I R8A77965_CLK_S0D4 / { compatible = "renesas,r8a77965"; @@ -60,6 +60,46 @@ clock-frequency = <0>; }; + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + opp-1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <960000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -71,6 +111,8 @@ power-domains = <&sysc R8A77965_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A77965_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; }; a57_1: cpu@1 { @@ -80,6 +122,8 @@ power-domains = <&sysc R8A77965_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A77965_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; }; L2_CA57: cache-controller-0 { @@ -306,7 +350,6 @@ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 522>; #thermal-sensor-cells = <1>; - status = "okay"; }; intc_ex: interrupt-controller@e61c0000 { @@ -545,11 +588,11 @@ }; hsusb: usb@e6590000 { - compatible = "renesas,usbhs-r8a7796", + compatible = "renesas,usbhs-r8a77965", "renesas,rcar-gen3-usbhs"; reg = <0 0xe6590000 0 0x100>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 704>; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; @@ -557,7 +600,7 @@ phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; - resets = <&cpg 704>; + resets = <&cpg 704>, <&cpg 703>; status = "disabled"; }; @@ -634,6 +677,14 @@ resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; }; dmac1: dma-controller@e7300000 { @@ -668,6 +719,14 @@ resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; }; dmac2: dma-controller@e7310000 { @@ -702,6 +761,14 @@ resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; }; ipmmu_ds0: mmu@e6740000 { @@ -838,6 +905,16 @@ status = "disabled"; }; + can0: can@e6c30000 { + reg = <0 0xe6c30000 0 0x1000>; + /* placeholder */ + }; + + can1: can@e6c38000 { + reg = <0 0xe6c38000 0 0x1000>; + /* placeholder */ + }; + pwm0: pwm@e6e30000 { compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 8>; @@ -1089,11 +1166,11 @@ vin0csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin0>; + remote-endpoint = <&csi20vin0>; }; vin0csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin0>; + remote-endpoint = <&csi40vin0>; }; }; }; @@ -1121,11 +1198,11 @@ vin1csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin1>; + remote-endpoint = <&csi20vin1>; }; vin1csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin1>; + remote-endpoint = <&csi40vin1>; }; }; }; @@ -1153,11 +1230,11 @@ vin2csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin2>; + remote-endpoint = <&csi20vin2>; }; vin2csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin2>; + remote-endpoint = <&csi40vin2>; }; }; }; @@ -1185,11 +1262,11 @@ vin3csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin3>; + remote-endpoint = <&csi20vin3>; }; vin3csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin3>; + remote-endpoint = <&csi40vin3>; }; }; }; @@ -1217,11 +1294,11 @@ vin4csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin4>; + remote-endpoint = <&csi20vin4>; }; vin4csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin4>; + remote-endpoint = <&csi40vin4>; }; }; }; @@ -1249,11 +1326,11 @@ vin5csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin5>; + remote-endpoint = <&csi20vin5>; }; vin5csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin5>; + remote-endpoint = <&csi40vin5>; }; }; }; @@ -1281,11 +1358,11 @@ vin6csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin6>; + remote-endpoint = <&csi20vin6>; }; vin6csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin6>; + remote-endpoint = <&csi40vin6>; }; }; }; @@ -1313,57 +1390,280 @@ vin7csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin7>; + remote-endpoint = <&csi20vin7>; }; vin7csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin7>; + remote-endpoint = <&csi40vin7>; }; }; }; }; rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a77965", "renesas,rcar_sound-gen3"; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ <0 0xec541000 0 0x280>, /* SSI */ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ - /* placeholder */ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A77965_CLK_S0D4>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + status = "disabled"; rcar_sound,dvc { dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; }; dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; }; }; + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + rcar_sound,src { src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; }; src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; }; }; rcar_sound,ssi { ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; }; ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; }; - }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; }; - port@1 { - reg = <1>; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; }; }; }; + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a77965", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a77965", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <16>; + }; + xhci0: usb@ee000000 { compatible = "renesas,xhci-r8a77965", "renesas,rcar-gen3-xhci"; @@ -1390,11 +1690,11 @@ compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -1414,12 +1714,12 @@ compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -1441,9 +1741,9 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; #phy-cells = <0>; status = "disabled"; }; @@ -1452,9 +1752,9 @@ compatible = "renesas,usb2-phy-r8a77965", "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee0a0200 0 0x700>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 702>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 702>; #phy-cells = <0>; status = "disabled"; }; @@ -1507,6 +1807,17 @@ status = "disabled"; }; + sata: sata@ee300000 { + compatible = "renesas,sata-r8a77965", + "renesas,rcar-gen3-sata"; + reg = <0 0xee300000 0 0x200000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 815>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 815>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -1578,6 +1889,16 @@ status = "disabled"; }; + fdp1@fe940000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe940000 0 0x2400>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 119>; + power-domains = <&sysc R8A77965_PD_A3VP>; + resets = <&cpg 119>; + renesas,fcp = <&fcpf0>; + }; + fcpf0: fcp@fe950000 { compatible = "renesas,fcpf"; reg = <0 0xfe950000 0 0x200>; @@ -1843,14 +2164,6 @@ }; }; - timer { - compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; - }; - thermal-zones { sensor_thermal1: sensor-thermal1 { polling-delay-passive = <250>; @@ -1895,6 +2208,14 @@ }; }; + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + /* External USB clocks - can be overridden by the board */ usb3s0_clk: usb3s0 { compatible = "fixed-clock"; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 8eac8ca6550b..0dbcb4cccc18 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -51,6 +51,15 @@ regulator-always-on; }; + vcc_vddq_vin0: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "VCC_VDDQ_VIN0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + lvds-decoder { compatible = "thine,thc63lvd1024"; vcc-supply = <&vcc_d3_3v>; @@ -128,6 +137,12 @@ function = "i2c0"; }; + mmc_pins: mmc_3_3v { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <3300>; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; @@ -192,6 +207,17 @@ }; }; +&mmc0 { + pinctrl-0 = <&mmc_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_d3_3v>; + vqmmc-supply = <&vcc_vddq_vin0>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index 954168858fed..cba7885cf7c3 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a77970 SoC + * Device Tree Source for the R-Car V3M (R8A77970) SoC * * Copyright (C) 2016-2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. @@ -24,6 +24,13 @@ i2c4 = &i2c4; }; + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -82,13 +89,6 @@ method = "smc"; }; - /* External CAN clock - to be overridden by boards that provide it */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - /* External SCIF clock - to be overridden by boards that provide it */ scif_clk: scif { compatible = "fixed-clock"; @@ -209,6 +209,76 @@ reg = <0 0xe6060000 0 0x504>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a77970-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a77970-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a77970-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a77970-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77970-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -544,6 +614,16 @@ status = "disabled"; }; + tpu: pwm@e6e80000 { + compatible = "renesas,tpu-r8a77970", "renesas,tpu"; + reg = <0 0xe6e80000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; vin0: video@e6ef0000 { compatible = "renesas,vin-r8a77970"; @@ -567,7 +647,7 @@ vin0csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin0>; + remote-endpoint = <&csi40vin0>; }; }; }; @@ -595,7 +675,7 @@ vin1csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin1>; + remote-endpoint = <&csi40vin1>; }; }; }; @@ -623,7 +703,7 @@ vin2csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin2>; + remote-endpoint = <&csi40vin2>; }; }; }; @@ -651,7 +731,7 @@ vin3csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin3>; + remote-endpoint = <&csi40vin3>; }; }; }; @@ -754,6 +834,18 @@ #iommu-cells = <1>; }; + mmc0: mmc@ee140000 { + compatible = "renesas,sdhi-r8a77970", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 314>; + max-frequency = <200000000>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 9f25c407dfd7..fe2e2c051cc9 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -45,6 +45,56 @@ regulator-boot-on; regulator-always-on; }; + + d1_8v: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "D1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <&d3_3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + x1_clk: x1-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; }; &avb { @@ -74,6 +124,13 @@ }; }; +&du { + clocks = <&cpg CPG_MOD 724>, + <&x1_clk>; + clock-names = "du.0", "dclkin.0"; + status = "okay"; +}; + &extal_clk { clock-frequency = <16666666>; }; @@ -102,6 +159,55 @@ gpio-controller; #gpio-cells = <2>; }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&d1_8v>; + dvdd-supply = <&d1_8v>; + pvdd-supply = <&d1_8v>; + bgvdd-supply = <&d1_8v>; + dvdd-3v-supply = <&d3_3v>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; }; &mmc0 { @@ -117,6 +223,18 @@ status = "okay"; }; +&pciec { + status = "okay"; +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pcie_phy { + status = "okay"; +}; + &pfc { avb_pins: avb { groups = "avb_mdio", "avb_rgmii"; @@ -156,6 +274,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif0 { pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts index 9dac42f8f804..dd14a41b32cd 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts @@ -27,6 +27,72 @@ /* first 128MB is reserved for secure area. */ reg = <0 0x48000000 0 0x78000000>; }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <&vcc3v3_d5>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + osc1_clk: osc1-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; + + vcc1v8_d4: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8_D4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc3v3_d5: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3_D5"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&osc1_clk>; + clock-names = "du.0", "dclkin.0"; + status = "okay"; }; &extal_clk { @@ -53,6 +119,64 @@ }; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + hdmi@39 { + compatible = "adi,adv7511w"; + #sound-dai-cells = <0>; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&vcc1v8_d4>; + dvdd-supply = <&vcc1v8_d4>; + pvdd-supply = <&vcc1v8_d4>; + bgvdd-supply = <&vcc1v8_d4>; + dvdd-3v-supply = <&vcc3v3_d5>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + &pfc { gether_pins: gether { groups = "gether_mdio_a", "gether_rgmii", @@ -60,6 +184,11 @@ function = "gether"; }; + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; @@ -71,6 +200,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif0 { pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index b8c9a56562f2..d4952b527d14 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a77980 SoC + * Device Tree Source for the R-Car V3H (R8A77980) SoC * * Copyright (C) 2018 Renesas Electronics Corp. * Copyright (C) 2018 Cogent Embedded, Inc. @@ -25,6 +25,13 @@ i2c5 = &i2c5; }; + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -77,27 +84,36 @@ }; }; - /* External CAN clock - to be overridden by boards that provide it */ - can_clk: can { + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; + /* This value must be overridden by the board */ clock-frequency = <0>; }; - extal_clk: extal { + extalr_clk: extalr { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by the board */ clock-frequency = <0>; }; - extalr_clk: extalr { + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { compatible = "fixed-clock"; #clock-cells = <0>; - /* This value must be overridden by the board */ clock-frequency = <0>; }; + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; @@ -118,6 +134,16 @@ #size-cells = <2>; ranges; + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a77980-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a77980", "renesas,rcar-gen3-gpio"; @@ -213,6 +239,76 @@ reg = <0 0xe6060000 0 0x50c>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a77980-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a77980-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a77980-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a77980-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77980-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -418,6 +514,16 @@ status = "disabled"; }; + pcie_phy: pcie-phy@e65d0000 { + compatible = "renesas,r8a77980-pcie-phy"; + reg = <0 0xe65d0000 0 0x8000>; + #phy-cells = <0>; + clocks = <&cpg CPG_MOD 319>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + canfd: can@e66c0000 { compatible = "renesas,r8a77980-canfd", "renesas,rcar-gen3-canfd"; @@ -443,69 +549,6 @@ }; }; - ipmmu_ds1: mmu@e7740000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xe7740000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 0>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_vip0: mmu@e7b00000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xe7b00000 0 0x1000>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_vip1: mmu@e7960000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xe7960000 0 0x1000>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_ir: mmu@ff8b0000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xff8b0000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 3>; - power-domains = <&sysc R8A77980_PD_A3IR>; - #iommu-cells = <1>; - }; - - ipmmu_mm: mmu@e67b0000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xe67b0000 0 0x1000>; - interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_rt: mmu@ffc80000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xffc80000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 10>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_vc0: mmu@fe6b0000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xfe6b0000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 12>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_vi0: mmu@febd0000 { - compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xfebd0000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 14>; - power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a77980", "renesas,etheravb-rcar-gen3"; @@ -623,6 +666,313 @@ status = "disabled"; }; + tpu: pwm@e6e80000 { + compatible = "renesas,tpu-r8a77980", "renesas,tpu"; + reg = <0 0xe6e80000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 811>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin0csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin0>; + }; + }; + }; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + status = "disabled"; + resets = <&cpg 810>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin1csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin1>; + }; + }; + }; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 809>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin2csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin2>; + }; + }; + }; + }; + + vin3: video@e6ef3000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 808>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin3csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin3>; + }; + }; + }; + }; + + vin4: video@e6ef4000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 807>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin4csi41: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi41vin4>; + }; + }; + }; + }; + + vin5: video@e6ef5000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 806>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin5csi41: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi41vin5>; + }; + }; + }; + }; + + vin6: video@e6ef6000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef6000 0 0x1000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 805>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 805>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin6csi41: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi41vin6>; + }; + }; + }; + }; + + vin7: video@e6ef7000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef7000 0 0x1000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 804>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 804>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin7csi41: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi41vin7>; + }; + }; + }; + }; + + vin8: video@e6ef8000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef8000 0 0x1000>; + interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + + vin9: video@e6ef9000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6ef9000 0 0x1000>; + interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 627>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 627>; + status = "disabled"; + }; + + vin10: video@e6efa000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efa000 0 0x1000>; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 625>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 625>; + status = "disabled"; + }; + + vin11: video@e6efb000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efb000 0 0x1000>; + interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 618>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 618>; + status = "disabled"; + }; + + vin12: video@e6efc000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efc000 0 0x1000>; + interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 612>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 612>; + status = "disabled"; + }; + + vin13: video@e6efd000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efd000 0 0x1000>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 608>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 608>; + status = "disabled"; + }; + + vin14: video@e6efe000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6efe000 0 0x1000>; + interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 605>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 605>; + status = "disabled"; + }; + + vin15: video@e6eff000 { + compatible = "renesas,vin-r8a77980"; + reg = <0 0xe6eff000 0 0x1000>; + interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 604>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 604>; + status = "disabled"; + }; + dmac1: dma-controller@e7300000 { compatible = "renesas,dmac-r8a77980", "renesas,rcar-dmac"; @@ -655,6 +1005,14 @@ resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; }; dmac2: dma-controller@e7310000 { @@ -689,6 +1047,14 @@ resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; }; gether: ethernet@e7400000 { @@ -703,6 +1069,69 @@ status = "disabled"; }; + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ir: mmu@ff8b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xff8b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 3>; + power-domains = <&sysc R8A77980_PD_A3IR>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip0: mmu@e7b00000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7b00000 0 0x1000>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip1: mmu@e7960000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7960000 0 0x1000>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + mmc0: mmc@ee140000 { compatible = "renesas,sdhi-r8a77980", "renesas,rcar-gen3-sdhi"; @@ -732,6 +1161,38 @@ resets = <&cpg 408>; }; + pciec: pcie@fe000000 { + compatible = "renesas,pcie-r8a77980", + "renesas,pcie-rcar-gen3"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = < + 0x01000000 0 0x00000000 0 0xfe100000 0 0x0100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x8000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x8000000 + >; + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 + 0 0x80000000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 + IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 319>; + phys = <&pcie_phy>; + phy-names = "pcie"; + status = "disabled"; + }; + vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; reg = <0 0xfea20000 0 0x5000>; @@ -750,6 +1211,84 @@ resets = <&cpg 603>; }; + csi40: csi2@feaa0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin0csi40>; + }; + csi40vin1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin1csi40>; + }; + csi40vin2: endpoint@2 { + reg = <2>; + remote-endpoint = <&vin2csi40>; + }; + csi40vin3: endpoint@3 { + reg = <3>; + remote-endpoint = <&vin3csi40>; + }; + }; + }; + }; + + csi41: csi2@feab0000 { + compatible = "renesas,r8a77980-csi2"; + reg = <0 0xfeab0000 0 0x10000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 715>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 715>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi41vin4: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin4csi41>; + }; + csi41vin5: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin5csi41>; + }; + csi41vin6: endpoint@2 { + reg = <2>; + remote-endpoint = <&vin6csi41>; + }; + csi41vin7: endpoint@3 { + reg = <3>; + remote-endpoint = <&vin7csi41>; + }; + }; + }; + }; + du: display@feb00000 { compatible = "renesas,du-r8a77980", "renesas,du-r8a77970"; diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 2bc3a4884b00..f342dd85b152 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -28,6 +28,111 @@ /* first 128MB is reserved for secure area. */ reg = <0x0 0x48000000 0x0 0x38000000>; }; + + cvbs-in { + compatible = "composite-video-connector"; + label = "CVBS IN"; + + port { + cvbs_con: endpoint { + remote-endpoint = <&adv7482_ain7>; + }; + }; + }; + + hdmi-in { + compatible = "hdmi-connector"; + label = "HDMI IN"; + type = "a"; + + port { + hdmi_in_con: endpoint { + remote-endpoint = <&adv7482_hdmi>; + }; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <®_3p3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + x13_clk: x13 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; }; &avb { @@ -47,6 +152,41 @@ }; }; +&csi40 { + status = "okay"; + + ports { + port@0 { + reg = <0>; + + csi40_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&adv7482_txa>; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&x13_clk>; + clock-names = "du.0", "du.1", "dclkin.0"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + }; +}; + &ehci0 { status = "okay"; }; @@ -55,6 +195,105 @@ clock-frequency = <48000000>; }; +&i2c0 { + status = "okay"; + + hdmi-encoder@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + + video-receiver@70 { + compatible = "adi,adv7482"; + reg = <0x70>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&gpio0>; + interrupt-names = "intrq1", "intrq2"; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>, + <17 IRQ_TYPE_LEVEL_LOW>; + + port@7 { + reg = <7>; + + adv7482_ain7: endpoint { + remote-endpoint = <&cvbs_con>; + }; + }; + + port@8 { + reg = <8>; + + adv7482_hdmi: endpoint { + remote-endpoint = <&hdmi_in_con>; + }; + }; + + port@a { + reg = <0xa>; + + adv7482_txa: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&csi40_in>; + }; + }; + }; +}; + +&lvds0 { + status = "okay"; + + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + +&lvds1 { + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; +}; + &ohci0 { status = "okay"; }; @@ -67,6 +306,21 @@ }; }; + du_pins: du { + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; + }; + + pwm3_pins: pwm3 { + groups = "pwm3_b"; + function = "pwm3"; + }; + + pwm5_pins: pwm5 { + groups = "pwm5_a"; + function = "pwm5"; + }; + usb0_pins: usb { groups = "usb0_b"; function = "usb0"; @@ -78,6 +332,20 @@ }; }; +&pwm3 { + pinctrl-0 = <&pwm3_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pwm5 { + pinctrl-0 = <&pwm5_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &rwdt { timeout-sec = <60>; status = "okay"; @@ -94,6 +362,10 @@ status = "okay"; }; +&vin4 { + status = "okay"; +}; + &xhci0 { pinctrl-0 = <&usb30_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index ae89260baad9..9509dc05665f 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -1,11 +1,11 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * Device Tree Source for the r8a77990 SoC + * Device Tree Source for the R-Car E3 (R8A77990) SoC * * Copyright (C) 2018 Renesas Electronics Corp. */ -#include <dt-bindings/clock/renesas-cpg-mssr.h> +#include <dt-bindings/clock/r8a77990-cpg-mssr.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/r8a77990-sysc.h> @@ -14,6 +14,17 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -22,7 +33,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0>; device_type = "cpu"; - power-domains = <&sysc 5>; + power-domains = <&sysc R8A77990_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; }; @@ -31,14 +42,14 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <1>; device_type = "cpu"; - power-domains = <&sysc 6>; + power-domains = <&sysc R8A77990_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; }; L2_CA53: cache-controller-0 { compatible = "cache"; - power-domains = <&sysc 21>; + power-domains = <&sysc R8A77990_PD_CA53_SCU>; cache-unified; cache-level = <2>; }; @@ -63,6 +74,13 @@ method = "smc"; }; + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + soc: soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -75,7 +93,7 @@ "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; clocks = <&cpg CPG_MOD 402>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 402>; status = "disabled"; }; @@ -91,7 +109,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 912>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 912>; }; @@ -106,7 +124,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 911>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 911>; }; @@ -121,7 +139,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 910>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 910>; }; @@ -136,7 +154,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 909>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 909>; }; @@ -151,7 +169,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 908>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 908>; }; @@ -166,7 +184,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 907>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 907>; }; @@ -181,10 +199,122 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 906>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 906>; }; + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 931>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 930>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 929>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 928>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 927>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 919>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 918>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c7: i2c@e6690000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77990", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6690000 0 0x40>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1003>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 1003>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + pfc: pin-controller@e6060000 { compatible = "renesas,pfc-r8a77990"; reg = <0 0xe6060000 0 0x508>; @@ -211,6 +341,132 @@ #power-domain-cells = <1>; }; + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a77990", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a77990", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a77990", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; + }; + ipmmu_ds0: mmu@e6740000 { compatible = "renesas,ipmmu-r8a77990"; reg = <0 0xe6740000 0 0x1000>; @@ -329,7 +585,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 812>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; #address-cells = <1>; @@ -337,18 +593,191 @@ status = "disabled"; }; + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + scif2: serial@e6e88000 { compatible = "renesas,scif-r8a77990", "renesas,rcar-gen3-scif", "renesas,scif"; reg = <0 0xe6e88000 0 64>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 310>; - clock-names = "fck"; - power-domains = <&sysc 32>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A77990_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled"; }; + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a77990", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a77990", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a77990", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a77990", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + vin4: video@e6ef4000 { + compatible = "renesas,vin-r8a77990"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 807>; + renesas,id = <4>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + vin4csi40: endpoint { + remote-endpoint= <&csi40vin4>; + }; + }; + }; + }; + + vin5: video@e6ef5000 { + compatible = "renesas,vin-r8a77990"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 806>; + renesas,id = <5>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + vin5csi40: endpoint { + remote-endpoint= <&csi40vin5>; + }; + }; + }; + }; + xhci0: usb@ee000000 { compatible = "renesas,xhci-r8a77990", "renesas,rcar-gen3-xhci"; @@ -364,11 +793,11 @@ compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; - power-domains = <&sysc 32>; - resets = <&cpg 703>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -376,12 +805,12 @@ compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; companion = <&ohci0>; - power-domains = <&sysc 32>; - resets = <&cpg 703>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -390,9 +819,9 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - power-domains = <&sysc 32>; - resets = <&cpg 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; #phy-cells = <0>; status = "disabled"; }; @@ -410,10 +839,208 @@ (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 408>; }; + vspb0: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 626>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 626>; + renesas,fcp = <&fcpvb0>; + }; + + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 607>; + iommus = <&ipmmu_vp0 5>; + }; + + vspi0: vsp@fe9a0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9a0000 0 0x8000>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 631>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 631>; + renesas,fcp = <&fcpvi0>; + }; + + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 611>; + iommus = <&ipmmu_vp0 8>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x7000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 623>; + renesas,fcp = <&fcpvd0>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 603>; + iommus = <&ipmmu_vi0 8>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x7000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 622>; + renesas,fcp = <&fcpvd1>; + }; + + fcpvd1: fcp@fea2f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea2f000 0 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 602>; + iommus = <&ipmmu_vi0 9>; + }; + + csi40: csi2@feaa0000 { + compatible = "renesas,r8a77990-csi2", "renesas,rcar-gen3-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin4: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin4csi40>; + }; + csi40vin5: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin5csi40>; + }; + }; + }; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a77990"; + reg = <0 0xfeb00000 0 0x80000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; + vsps = <&vspd0 0 &vspd1 0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + + port@2 { + reg = <2>; + du_out_lvds1: endpoint { + remote-endpoint = <&lvds1_in>; + }; + }; + }; + }; + + lvds0: lvds-encoder@feb90000 { + compatible = "renesas,r8a77990-lvds"; + reg = <0 0xfeb90000 0 0x20>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + + lvds1: lvds-encoder@feb90100 { + compatible = "renesas,r8a77990-lvds"; + reg = <0 0xfeb90100 0 0x20>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 726>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds1_in: endpoint { + remote-endpoint = <&du_out_lvds1>; + }; + }; + + port@1 { + reg = <1>; + lvds1_out: endpoint { + }; + }; + }; + }; + prr: chipid@fff00044 { compatible = "renesas,prr"; reg = <0 0xfff00044 0 4>; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index a8e8f2669d4c..2405eaad0296 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -2,7 +2,7 @@ /* * Device Tree Source for the Draak board * - * Copyright (C) 2016 Renesas Electronics Corp. + * Copyright (C) 2016-2018 Renesas Electronics Corp. * Copyright (C) 2017 Glider bvba */ @@ -24,55 +24,58 @@ stdout-path = "serial0:115200n8"; }; - vga { - compatible = "vga-connector"; + composite-in { + compatible = "composite-video-connector"; port { - vga_in: endpoint { - remote-endpoint = <&adv7123_out>; + composite_con_in: endpoint { + remote-endpoint = <&adv7180_in>; }; }; }; - vga-encoder { - compatible = "adi,adv7123"; - - ports { - #address-cells = <1>; - #size-cells = <0>; + hdmi-in { + compatible = "hdmi-connector"; + type = "a"; - port@0 { - reg = <0>; - adv7123_in: endpoint { - remote-endpoint = <&du_out_rgb>; - }; - }; - port@1 { - reg = <1>; - adv7123_out: endpoint { - remote-endpoint = <&vga_in>; - }; + port { + hdmi_con_in: endpoint { + remote-endpoint = <&adv7612_in>; }; }; }; - composite-in { - compatible = "composite-video-connector"; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; port { - composite_con_in: endpoint { - remote-endpoint = <&adv7180_in>; + hdmi_con_out: endpoint { + remote-endpoint = <&adv7511_out>; }; }; }; - hdmi-in { - compatible = "hdmi-connector"; - type = "a"; + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <®_3p3v>; - port { - hdmi_con_in: endpoint { - remote-endpoint = <&adv7612_in>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; }; }; }; @@ -101,76 +104,86 @@ regulator-always-on; }; - x12_clk: x12 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <74250000>; - }; -}; - -&extal_clk { - clock-frequency = <48000000>; -}; + vga { + compatible = "vga-connector"; -&pfc { - avb0_pins: avb { - mux { - groups = "avb0_link", "avb0_mdio", "avb0_mii"; - function = "avb0"; + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; }; }; - du_pins: du { - groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; - function = "du"; - }; + vga-encoder { + compatible = "adi,adv7123"; - i2c0_pins: i2c0 { - groups = "i2c0"; - function = "i2c0"; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; - i2c1_pins: i2c1 { - groups = "i2c1"; - function = "i2c1"; + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; }; - pwm0_pins: pwm0 { - groups = "pwm0_c"; - function = "pwm0"; + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; }; +}; - pwm1_pins: pwm1 { - groups = "pwm1_c"; - function = "pwm1"; - }; +&avb { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + renesas,no-ether-link; + phy-handle = <&phy0>; + phy-mode = "rgmii-txid"; + status = "okay"; - scif2_pins: scif2 { - groups = "scif2_data"; - function = "scif2"; + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; }; +}; - sdhi2_pins: sd2 { - groups = "mmc_data8", "mmc_ctrl"; - function = "mmc"; - power-source = <1800>; - }; +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; - sdhi2_pins_uhs: sd2_uhs { - groups = "mmc_data8", "mmc_ctrl"; - function = "mmc"; - power-source = <1800>; - }; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&x12_clk>; + clock-names = "du.0", "du.1", "dclkin.0"; - usb0_pins: usb0 { - groups = "usb0"; - function = "usb0"; + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; }; +}; - vin4_pins_cvbs: vin4 { - groups = "vin4_data8", "vin4_sync", "vin4_clk"; - function = "vin4"; - }; +&ehci0 { + status = "okay"; +}; + +&extal_clk { + clock-frequency = <48000000>; }; &i2c0 { @@ -178,12 +191,6 @@ pinctrl-names = "default"; status = "okay"; - eeprom@50 { - compatible = "rohm,br24t01", "atmel,24c01"; - reg = <0x50>; - pagesize = <8>; - }; - composite-in@20 { compatible = "adi,adv7180cp"; reg = <0x20>; @@ -218,6 +225,43 @@ }; + hdmi-encoder@39 { + compatible = "adi,adv7511w"; + reg = <0x39>, <0x3f>, <0x38>, <0x3c>; + reg-names = "main", "edid", "packet", "cec"; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + + /* Depends on LVDS */ + max-clock = <135000000>; + min-vrefresh = <50>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + hdmi-decoder@4c { compatible = "adi,adv7612"; reg = <0x4c>; @@ -254,6 +298,12 @@ }; }; }; + + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; }; &i2c1 { @@ -262,47 +312,112 @@ status = "okay"; }; -&du { - pinctrl-0 = <&du_pins>; - pinctrl-names = "default"; +&lvds0 { status = "okay"; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&x12_clk>; - clock-names = "du.0", "du.1", "dclkin.0"; + clocks = <&cpg CPG_MOD 727>, + <&x12_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; ports { - port@0 { - endpoint { - remote-endpoint = <&adv7123_in>; + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; }; }; }; }; -&ehci0 { - status = "okay"; +&lvds1 { + clocks = <&cpg CPG_MOD 727>, + <&x12_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; }; &ohci0 { status = "okay"; }; -&avb { - pinctrl-0 = <&avb0_pins>; +&pfc { + avb0_pins: avb { + mux { + groups = "avb0_link", "avb0_mdio", "avb0_mii"; + function = "avb0"; + }; + }; + + du_pins: du { + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + + pwm0_pins: pwm0 { + groups = "pwm0_c"; + function = "pwm0"; + }; + + pwm1_pins: pwm1 { + groups = "pwm1_c"; + function = "pwm1"; + }; + + scif2_pins: scif2 { + groups = "scif2_data"; + function = "scif2"; + }; + + sdhi2_pins: sd2 { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <1800>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <1800>; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + vin4_pins_cvbs: vin4 { + groups = "vin4_data8", "vin4_sync", "vin4_clk"; + function = "vin4"; + }; +}; + +&pwm0 { + pinctrl-0 = <&pwm0_pins>; pinctrl-names = "default"; - renesas,no-ether-link; - phy-handle = <&phy0>; - phy-mode = "rgmii-txid"; + status = "okay"; +}; - phy0: ethernet-phy@0 { - rxc-skew-ps = <1500>; - reg = <0>; - interrupt-parent = <&gpio5>; - interrupts = <19 IRQ_TYPE_LEVEL_LOW>; - }; +&pwm1 { + pinctrl-0 = <&pwm1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; }; &scif2 { @@ -333,25 +448,6 @@ status = "okay"; }; -&pwm0 { - pinctrl-0 = <&pwm0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pwm1 { - pinctrl-0 = <&pwm1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - &vin4 { pinctrl-0 = <&vin4_pins_cvbs>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index fe77bc43c447..214f4954b321 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a77995 SoC + * Device Tree Source for the R-Car D3 (R8A77995) SoC * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2017 Glider bvba @@ -391,6 +391,10 @@ resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <8>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>; }; dmac1: dma-controller@e7300000 { @@ -415,6 +419,10 @@ resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <8>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>; }; dmac2: dma-controller@e7310000 { @@ -439,6 +447,10 @@ resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <8>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>; }; ipmmu_ds0: mmu@e6740000 { @@ -817,11 +829,11 @@ compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -829,12 +841,12 @@ compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; phys = <&usb2_phy0>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -843,9 +855,9 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; #phy-cells = <0>; status = "disabled"; }; @@ -960,12 +972,68 @@ port@1 { reg = <1>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; }; }; port@2 { reg = <2>; du_out_lvds1: endpoint { + remote-endpoint = <&lvds1_in>; + }; + }; + }; + }; + + lvds0: lvds-encoder@feb90000 { + compatible = "renesas,r8a77995-lvds"; + reg = <0 0xfeb90000 0 0x20>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + + lvds1: lvds-encoder@feb90100 { + compatible = "renesas,r8a77995-lvds"; + reg = <0 0xfeb90100 0 0x20>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 726>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds1_in: endpoint { + remote-endpoint = <&du_out_lvds1>; + }; + }; + + port@1 { + reg = <1>; + lvds1_out: endpoint { }; }; }; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 7d3d866a0063..7f91ff524109 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -420,7 +420,10 @@ video-receiver@70 { compatible = "adi,adv7482"; - reg = <0x70>; + reg = <0x70 0x71 0x72 0x73 0x74 0x75 + 0x60 0x61 0x62 0x63 0x64 0x65>; + reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", + "infoframe", "cbus", "cec", "sdp", "txa", "txb" ; #address-cells = <1>; #size-cells = <0>; @@ -471,6 +474,8 @@ &i2c_dvfs { status = "okay"; + clock-frequency = <400000>; + pmic: pmic@30 { pinctrl-0 = <&irq0_pins>; pinctrl-names = "default"; @@ -748,6 +753,7 @@ wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; bus-width = <4>; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; @@ -777,6 +783,7 @@ wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; bus-width = <4>; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index 8bf3091a899c..1b316d79df88 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -127,7 +127,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x71>; - reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 0ead552d7eae..89daca7356df 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -18,6 +18,7 @@ }; chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; @@ -241,6 +242,8 @@ &i2c_dvfs { status = "okay"; + clock-frequency = <400000>; + pmic: pmic@30 { pinctrl-0 = <&irq0_pins>; pinctrl-names = "default"; @@ -416,6 +419,7 @@ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; bus-width = <4>; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index b0092d95b574..49042c477870 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb @@ -14,5 +15,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts new file mode 100644 index 000000000000..263d7f3dbc44 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "px30.dtsi" + +/ { + model = "Rockchip PX30 EVB"; + compatible = "rockchip,px30-evb", "rockchip,px30"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 2>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + esc-key { + label = "esc"; + linux,code = <KEY_ESC>; + press-threshold-microvolt = <1310000>; + }; + + home-key { + label = "home"; + linux,code = <KEY_HOME>; + press-threshold-microvolt = <624000>; + }; + + menu-key { + label = "menu"; + linux,code = <KEY_MENU>; + press-threshold-microvolt = <987000>; + }; + + vol-down-key { + label = "volume down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <300000>; + }; + + vol-up-key { + label = "volume up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <17000>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 25000 0>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */ + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v0_sys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&display_subsystem { + status = "okay"; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&gmac { + clock_in_out = "output"; + phy-supply = <&vcc_phy>; + snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 50000 50000>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2s1_2ch { + status = "okay"; +}; + +&io_domains { + status = "okay"; +}; + +&pinctrl { + headphone { + hp_det: hp-det { + rockchip,pins = + <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + pmic { + pmic_int: pmic_int { + rockchip,pins = + <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + soc_slppin_gpio: soc_slppin_gpio { + rockchip,pins = + <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>; + }; + + soc_slppin_slp: soc_slppin_slp { + rockchip,pins = + <0 RK_PA4 RK_FUNC_1 &pcfg_pull_none>; + }; + + soc_slppin_rst: soc_slppin_rst { + rockchip,pins = + <0 RK_PA4 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&saradc { + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <800>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdio { + bus-width = <4>; + cap-sd-highspeed; + keep-power-in-suspend; + non-removable; + mmc-pwrseq = <&sdio_pwrseq>; + sd-uhs-sdr104; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer &uart1_cts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb20_otg { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi new file mode 100644 index 000000000000..9aa8d5ef9e45 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -0,0 +1,2047 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd + */ + +#include <dt-bindings/clock/px30-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/power/px30-power.h> +#include <dt-bindings/soc/rockchip,boot-mode.h> + +/ { + compatible = "rockchip,px30"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &gmac; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + spi0 = &spi0; + spi1 = &spi1; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + clocks = <&cru ARMCLK>; + #cooling-cells = <2>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + dynamic-power-coefficient = <90>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + clocks = <&cru ARMCLK>; + #cooling-cells = <2>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + dynamic-power-coefficient = <90>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + clocks = <&cru ARMCLK>; + #cooling-cells = <2>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + dynamic-power-coefficient = <90>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + clocks = <&cru ARMCLK>; + #cooling-cells = <2>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + dynamic-power-coefficient = <90>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <120>; + exit-latency-us = <250>; + min-residency-us = <900>; + }; + + CLUSTER_SLEEP: cluster-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <2000>; + }; + }; + }; + + cpu0_opp_table: cpu0-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <950000 950000 1350000>; + clock-latency-ns = <40000>; + opp-suspend; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <950000 950000 1350000>; + clock-latency-ns = <40000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1050000 1050000 1350000>; + clock-latency-ns = <40000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1175000 1175000 1350000>; + clock-latency-ns = <40000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1300000 1300000 1350000>; + clock-latency-ns = <40000>; + }; + opp-1296000000 { + opp-hz = /bits/ 64 <1296000000>; + opp-microvolt = <1350000 1350000 1350000>; + clock-latency-ns = <40000>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + display_subsystem: display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vopb_out>, <&vopl_out>; + status = "disabled"; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + gmac_clkin: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + }; + + xin32k: xin32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + }; + + pmu: power-management@ff000000 { + compatible = "rockchip,px30-pmu", "syscon", "simple-mfd"; + reg = <0x0 0xff000000 0x0 0x1000>; + + power: power-controller { + compatible = "rockchip,px30-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* These power domains are grouped by VD_LOGIC */ + pd_usb@PX30_PD_USB { + reg = <PX30_PD_USB>; + clocks = <&cru HCLK_HOST>, + <&cru HCLK_OTG>, + <&cru SCLK_OTG_ADP>; + pm_qos = <&qos_usb_host>, <&qos_usb_otg>; + }; + pd_sdcard@PX30_PD_SDCARD { + reg = <PX30_PD_SDCARD>; + clocks = <&cru HCLK_SDMMC>, + <&cru SCLK_SDMMC>; + pm_qos = <&qos_sdmmc>; + }; + pd_gmac@PX30_PD_GMAC { + reg = <PX30_PD_GMAC>; + clocks = <&cru ACLK_GMAC>, + <&cru PCLK_GMAC>, + <&cru SCLK_MAC_REF>, + <&cru SCLK_GMAC_RX_TX>; + pm_qos = <&qos_gmac>; + }; + pd_mmc_nand@PX30_PD_MMC_NAND { + reg = <PX30_PD_MMC_NAND>; + clocks = <&cru HCLK_NANDC>, + <&cru HCLK_EMMC>, + <&cru HCLK_SDIO>, + <&cru HCLK_SFC>, + <&cru SCLK_EMMC>, + <&cru SCLK_NANDC>, + <&cru SCLK_SDIO>, + <&cru SCLK_SFC>; + pm_qos = <&qos_emmc>, <&qos_nand>, + <&qos_sdio>, <&qos_sfc>; + }; + pd_vpu@PX30_PD_VPU { + reg = <PX30_PD_VPU>; + clocks = <&cru ACLK_VPU>, + <&cru HCLK_VPU>, + <&cru SCLK_CORE_VPU>; + pm_qos = <&qos_vpu>, <&qos_vpu_r128>; + }; + pd_vo@PX30_PD_VO { + reg = <PX30_PD_VO>; + clocks = <&cru ACLK_RGA>, + <&cru ACLK_VOPB>, + <&cru ACLK_VOPL>, + <&cru DCLK_VOPB>, + <&cru DCLK_VOPL>, + <&cru HCLK_RGA>, + <&cru HCLK_VOPB>, + <&cru HCLK_VOPL>, + <&cru PCLK_MIPI_DSI>, + <&cru SCLK_RGA_CORE>, + <&cru SCLK_VOPB_PWM>; + pm_qos = <&qos_rga_rd>, <&qos_rga_wr>, + <&qos_vop_m0>, <&qos_vop_m1>; + }; + pd_vi@PX30_PD_VI { + reg = <PX30_PD_VI>; + clocks = <&cru ACLK_CIF>, + <&cru ACLK_ISP>, + <&cru HCLK_CIF>, + <&cru HCLK_ISP>, + <&cru SCLK_ISP>; + pm_qos = <&qos_isp_128>, <&qos_isp_rd>, + <&qos_isp_wr>, <&qos_isp_m1>, + <&qos_vip>; + }; + pd_gpu@PX30_PD_GPU { + reg = <PX30_PD_GPU>; + clocks = <&cru SCLK_GPU>; + pm_qos = <&qos_gpu>; + }; + }; + }; + + pmugrf: syscon@ff010000 { + compatible = "rockchip,px30-pmugrf", "syscon", "simple-mfd"; + reg = <0x0 0xff010000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + pmu_io_domains: io-domains { + compatible = "rockchip,px30-pmu-io-voltage-domain"; + status = "disabled"; + }; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x200>; + mode-bootloader = <BOOT_BL_DOWNLOAD>; + mode-fastboot = <BOOT_FASTBOOT>; + mode-loader = <BOOT_BL_DOWNLOAD>; + mode-normal = <BOOT_NORMAL>; + mode-recovery = <BOOT_RECOVERY>; + }; + }; + + uart0: serial@ff030000 { + compatible = "rockchip,px30-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff030000 0x0 0x100>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 0>, <&dmac 1>; + dma-names = "tx", "rx"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "disabled"; + }; + + i2s1_2ch: i2s@ff070000 { + compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff070000 0x0 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&dmac 18>, <&dmac 19>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_2ch_sclk &i2s1_2ch_lrck + &i2s1_2ch_sdi &i2s1_2ch_sdo>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s2_2ch: i2s@ff080000 { + compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff080000 0x0 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&dmac 20>, <&dmac 21>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2_2ch_sclk &i2s2_2ch_lrck + &i2s2_2ch_sdi &i2s2_2ch_sdo>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + gic: interrupt-controller@ff131000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xff131000 0 0x1000>, + <0x0 0xff132000 0 0x2000>, + <0x0 0xff134000 0 0x2000>, + <0x0 0xff136000 0 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + grf: syscon@ff140000 { + compatible = "rockchip,px30-grf", "syscon", "simple-mfd"; + reg = <0x0 0xff140000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + io_domains: io-domains { + compatible = "rockchip,px30-io-voltage-domain"; + status = "disabled"; + }; + }; + + uart1: serial@ff158000 { + compatible = "rockchip,px30-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff158000 0x0 0x100>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 2>, <&dmac 3>; + dma-names = "tx", "rx"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>; + status = "disabled"; + }; + + uart2: serial@ff160000 { + compatible = "rockchip,px30-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff160000 0x0 0x100>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 4>, <&dmac 5>; + dma-names = "tx", "rx"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "disabled"; + }; + + uart3: serial@ff168000 { + compatible = "rockchip,px30-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff168000 0x0 0x100>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 6>, <&dmac 7>; + dma-names = "tx", "rx"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3m1_xfer &uart3m1_cts &uart3m1_rts>; + status = "disabled"; + }; + + uart4: serial@ff170000 { + compatible = "rockchip,px30-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff170000 0x0 0x100>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 8>, <&dmac 9>; + dma-names = "tx", "rx"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer &uart4_cts &uart4_rts>; + status = "disabled"; + }; + + uart5: serial@ff178000 { + compatible = "rockchip,px30-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff178000 0x0 0x100>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 10>, <&dmac 11>; + dma-names = "tx", "rx"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart5_xfer &uart5_cts &uart5_rts>; + status = "disabled"; + }; + + i2c0: i2c@ff180000 { + compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff180000 0x0 0x1000>; + clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@ff190000 { + compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff190000 0x0 0x1000>; + clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@ff1a0000 { + compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff1a0000 0x0 0x1000>; + clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@ff1b0000 { + compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff1b0000 0x0 0x1000>; + clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@ff1d0000 { + compatible = "rockchip,px30-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff1d0000 0x0 0x1000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac 12>, <&dmac 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@ff1d8000 { + compatible = "rockchip,px30-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff1d8000 0x0 0x1000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac 14>, <&dmac 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + wdt: watchdog@ff1e0000 { + compatible = "snps,dw-wdt"; + reg = <0x0 0xff1e0000 0x0 0x100>; + clocks = <&cru PCLK_WDT_NS>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pwm0: pwm@ff200000 { + compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff200000 0x0 0x10>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm1: pwm@ff200010 { + compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff200010 0x0 0x10>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm2: pwm@ff200020 { + compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff200020 0x0 0x10>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm3: pwm@ff200030 { + compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff200030 0x0 0x10>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm4: pwm@ff208000 { + compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff208000 0x0 0x10>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm5: pwm@ff208010 { + compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff208010 0x0 0x10>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm5_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm6: pwm@ff208020 { + compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff208020 0x0 0x10>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm6_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm7: pwm@ff208030 { + compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff208030 0x0 0x10>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm7_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + rktimer: timer@ff210000 { + compatible = "rockchip,px30-timer", "rockchip,rk3288-timer"; + reg = <0x0 0xff210000 0x0 0x1000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>; + clock-names = "pclk", "timer"; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dmac: dmac@ff240000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff240000 0x0 0x4000>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + }; + + saradc: saradc@ff288000 { + compatible = "rockchip,px30-saradc", "rockchip,rk3399-saradc"; + reg = <0x0 0xff288000 0x0 0x100>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_SARADC_P>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + + cru: clock-controller@ff2b0000 { + compatible = "rockchip,px30-cru"; + reg = <0x0 0xff2b0000 0x0 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + + assigned-clocks = <&cru PLL_NPLL>; + assigned-clock-rates = <1188000000>; + }; + + pmucru: clock-controller@ff2bc000 { + compatible = "rockchip,px30-pmucru"; + reg = <0x0 0xff2bc000 0x0 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + + assigned-clocks = + <&pmucru PLL_GPLL>, <&pmucru PCLK_PMU_PRE>, + <&pmucru SCLK_WIFI_PMU>, <&cru ARMCLK>, + <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, + <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, + <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>; + assigned-clock-rates = + <1200000000>, <100000000>, + <26000000>, <600000000>, + <200000000>, <200000000>, + <150000000>, <150000000>, + <100000000>, <200000000>; + }; + + usb20_otg: usb@ff300000 { + compatible = "rockchip,px30-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0x0 0xff300000 0x0 0x40000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG>; + clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <280>; + g-tx-fifo-size = <256 128 128 64 32 16>; + g-use-dma; + power-domains = <&power PX30_PD_USB>; + status = "disabled"; + }; + + usb_host0_ehci: usb@ff340000 { + compatible = "generic-ehci"; + reg = <0x0 0xff340000 0x0 0x10000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST>; + clock-names = "usbhost"; + power-domains = <&power PX30_PD_USB>; + status = "disabled"; + }; + + usb_host0_ohci: usb@ff350000 { + compatible = "generic-ohci"; + reg = <0x0 0xff350000 0x0 0x10000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST>; + clock-names = "usbhost"; + power-domains = <&power PX30_PD_USB>; + status = "disabled"; + }; + + gmac: ethernet@ff360000 { + compatible = "rockchip,px30-gmac"; + reg = <0x0 0xff360000 0x0 0x10000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&cru SCLK_GMAC>, <&cru SCLK_GMAC_RX_TX>, + <&cru SCLK_GMAC_RX_TX>, <&cru SCLK_MAC_REF>, + <&cru SCLK_MAC_REFOUT>, <&cru ACLK_GMAC>, + <&cru PCLK_GMAC>, <&cru SCLK_GMAC_RMII>; + clock-names = "stmmaceth", "mac_clk_rx", + "mac_clk_tx", "clk_mac_ref", + "clk_mac_refout", "aclk_mac", + "pclk_mac", "clk_mac_speed"; + rockchip,grf = <&grf>; + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins &mac_refclk_12ma>; + power-domains = <&power PX30_PD_GMAC>; + resets = <&cru SRST_GMAC_A>; + reset-names = "stmmaceth"; + status = "disabled"; + }; + + sdmmc: dwmmc@ff370000 { + compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff370000 0x0 0x4000>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>; + power-domains = <&power PX30_PD_SDCARD>; + status = "disabled"; + }; + + sdio: dwmmc@ff380000 { + compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff380000 0x0 0x4000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_bus4 &sdio_cmd &sdio_clk>; + power-domains = <&power PX30_PD_MMC_NAND>; + status = "disabled"; + }; + + emmc: dwmmc@ff390000 { + compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff390000 0x0 0x4000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + power-domains = <&power PX30_PD_MMC_NAND>; + status = "disabled"; + }; + + vopb: vop@ff460000 { + compatible = "rockchip,px30-vop-big"; + reg = <0x0 0xff460000 0x0 0xefc>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOPB>, <&cru DCLK_VOPB>, + <&cru HCLK_VOPB>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_VOPB_A>, <&cru SRST_VOPB_H>, <&cru SRST_VOPB>; + reset-names = "axi", "ahb", "dclk"; + iommus = <&vopb_mmu>; + power-domains = <&power PX30_PD_VO>; + rockchip,grf = <&grf>; + status = "disabled"; + + vopb_out: port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + vopb_mmu: iommu@ff460f00 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff460f00 0x0 0x100>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vopb_mmu"; + clocks = <&cru ACLK_VOPB>, <&cru HCLK_VOPB>; + clock-names = "aclk", "hclk"; + power-domains = <&power PX30_PD_VO>; + #iommu-cells = <0>; + status = "disabled"; + }; + + vopl: vop@ff470000 { + compatible = "rockchip,px30-vop-lit"; + reg = <0x0 0xff470000 0x0 0xefc>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOPL>, <&cru DCLK_VOPL>, + <&cru HCLK_VOPL>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_VOPL_A>, <&cru SRST_VOPL_H>, <&cru SRST_VOPL>; + reset-names = "axi", "ahb", "dclk"; + iommus = <&vopl_mmu>; + power-domains = <&power PX30_PD_VO>; + rockchip,grf = <&grf>; + status = "disabled"; + + vopl_out: port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + vopl_mmu: iommu@ff470f00 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff470f00 0x0 0x100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vopl_mmu"; + clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>; + clock-names = "aclk", "hclk"; + power-domains = <&power PX30_PD_VO>; + #iommu-cells = <0>; + status = "disabled"; + }; + + qos_gmac: qos@ff518000 { + compatible = "syscon"; + reg = <0x0 0xff518000 0x0 0x20>; + }; + + qos_gpu: qos@ff520000 { + compatible = "syscon"; + reg = <0x0 0xff520000 0x0 0x20>; + }; + + qos_sdmmc: qos@ff52c000 { + compatible = "syscon"; + reg = <0x0 0xff52c000 0x0 0x20>; + }; + + qos_emmc: qos@ff538000 { + compatible = "syscon"; + reg = <0x0 0xff538000 0x0 0x20>; + }; + + qos_nand: qos@ff538080 { + compatible = "syscon"; + reg = <0x0 0xff538080 0x0 0x20>; + }; + + qos_sdio: qos@ff538100 { + compatible = "syscon"; + reg = <0x0 0xff538100 0x0 0x20>; + }; + + qos_sfc: qos@ff538180 { + compatible = "syscon"; + reg = <0x0 0xff538180 0x0 0x20>; + }; + + qos_usb_host: qos@ff540000 { + compatible = "syscon"; + reg = <0x0 0xff540000 0x0 0x20>; + }; + + qos_usb_otg: qos@ff540080 { + compatible = "syscon"; + reg = <0x0 0xff540080 0x0 0x20>; + }; + + qos_isp_128: qos@ff548000 { + compatible = "syscon"; + reg = <0x0 0xff548000 0x0 0x20>; + }; + + qos_isp_rd: qos@ff548080 { + compatible = "syscon"; + reg = <0x0 0xff548080 0x0 0x20>; + }; + + qos_isp_wr: qos@ff548100 { + compatible = "syscon"; + reg = <0x0 0xff548100 0x0 0x20>; + }; + + qos_isp_m1: qos@ff548180 { + compatible = "syscon"; + reg = <0x0 0xff548180 0x0 0x20>; + }; + + qos_vip: qos@ff548200 { + compatible = "syscon"; + reg = <0x0 0xff548200 0x0 0x20>; + }; + + qos_rga_rd: qos@ff550000 { + compatible = "syscon"; + reg = <0x0 0xff550000 0x0 0x20>; + }; + + qos_rga_wr: qos@ff550080 { + compatible = "syscon"; + reg = <0x0 0xff550080 0x0 0x20>; + }; + + qos_vop_m0: qos@ff550100 { + compatible = "syscon"; + reg = <0x0 0xff550100 0x0 0x20>; + }; + + qos_vop_m1: qos@ff550180 { + compatible = "syscon"; + reg = <0x0 0xff550180 0x0 0x20>; + }; + + qos_vpu: qos@ff558000 { + compatible = "syscon"; + reg = <0x0 0xff558000 0x0 0x20>; + }; + + qos_vpu_r128: qos@ff558080 { + compatible = "syscon"; + reg = <0x0 0xff558080 0x0 0x20>; + }; + + pinctrl: pinctrl { + compatible = "rockchip,px30-pinctrl"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmugrf>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio0: gpio0@ff040000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff040000 0x0 0x100>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmucru PCLK_GPIO0_PMU>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@ff250000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff250000 0x0 0x100>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@ff260000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff260000 0x0 0x100>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@ff270000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff270000 0x0 0x100>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO3>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pcfg_pull_none_2ma: pcfg-pull-none-2ma { + bias-disable; + drive-strength = <2>; + }; + + pcfg_pull_up_2ma: pcfg-pull-up-2ma { + bias-pull-up; + drive-strength = <2>; + }; + + pcfg_pull_up_4ma: pcfg-pull-up-4ma { + bias-pull-up; + drive-strength = <4>; + }; + + pcfg_pull_none_4ma: pcfg-pull-none-4ma { + bias-disable; + drive-strength = <4>; + }; + + pcfg_pull_down_4ma: pcfg-pull-down-4ma { + bias-pull-down; + drive-strength = <4>; + }; + + pcfg_pull_none_8ma: pcfg-pull-none-8ma { + bias-disable; + drive-strength = <8>; + }; + + pcfg_pull_up_8ma: pcfg-pull-up-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + pcfg_pull_none_12ma: pcfg-pull-none-12ma { + bias-disable; + drive-strength = <12>; + }; + + pcfg_pull_up_12ma: pcfg-pull-up-12ma { + bias-pull-up; + drive-strength = <12>; + }; + + pcfg_pull_none_smt: pcfg-pull-none-smt { + bias-disable; + input-schmitt-enable; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_input_high: pcfg-input-high { + bias-pull-up; + input-enable; + }; + + pcfg_input: pcfg-input { + input-enable; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = + <0 RK_PB0 1 &pcfg_pull_none_smt>, + <0 RK_PB1 1 &pcfg_pull_none_smt>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = + <0 RK_PC2 1 &pcfg_pull_none_smt>, + <0 RK_PC3 1 &pcfg_pull_none_smt>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = + <2 RK_PB7 2 &pcfg_pull_none_smt>, + <2 RK_PC0 2 &pcfg_pull_none_smt>; + }; + }; + + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = + <1 RK_PB4 4 &pcfg_pull_none_smt>, + <1 RK_PB5 4 &pcfg_pull_none_smt>; + }; + }; + + tsadc { + tsadc_otp_gpio: tsadc-otp-gpio { + rockchip,pins = + <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + tsadc_otp_out: tsadc-otp-out { + rockchip,pins = + <0 RK_PA6 1 &pcfg_pull_none>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = + <0 RK_PB2 1 &pcfg_pull_up>, + <0 RK_PB3 1 &pcfg_pull_up>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = + <0 RK_PB4 1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = + <0 RK_PB5 1 &pcfg_pull_none>; + }; + + uart0_rts_gpio: uart0-rts-gpio { + rockchip,pins = + <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = + <1 RK_PC1 1 &pcfg_pull_up>, + <1 RK_PC0 1 &pcfg_pull_up>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = + <1 RK_PC2 1 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = + <1 RK_PC3 1 &pcfg_pull_none>; + }; + + uart1_rts_gpio: uart1-rts-gpio { + rockchip,pins = + <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + uart2-m0 { + uart2m0_xfer: uart2m0-xfer { + rockchip,pins = + <1 RK_PD2 2 &pcfg_pull_up>, + <1 RK_PD3 2 &pcfg_pull_up>; + }; + }; + + uart2-m1 { + uart2m1_xfer: uart2m1-xfer { + rockchip,pins = + <2 RK_PB4 2 &pcfg_pull_up>, + <2 RK_PB6 2 &pcfg_pull_up>; + }; + }; + + uart3-m0 { + uart3m0_xfer: uart3m0-xfer { + rockchip,pins = + <0 RK_PC0 2 &pcfg_pull_up>, + <0 RK_PC1 2 &pcfg_pull_up>; + }; + + uart3m0_cts: uart3m0-cts { + rockchip,pins = + <0 RK_PC2 2 &pcfg_pull_none>; + }; + + uart3m0_rts: uart3m0-rts { + rockchip,pins = + <0 RK_PC3 2 &pcfg_pull_none>; + }; + + uart3m0_rts_gpio: uart3m0-rts-gpio { + rockchip,pins = + <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + uart3-m1 { + uart3m1_xfer: uart3m1-xfer { + rockchip,pins = + <1 RK_PB6 2 &pcfg_pull_up>, + <1 RK_PB7 2 &pcfg_pull_up>; + }; + + uart3m1_cts: uart3m1-cts { + rockchip,pins = + <1 RK_PB4 2 &pcfg_pull_none>; + }; + + uart3m1_rts: uart3m1-rts { + rockchip,pins = + <1 RK_PB5 2 &pcfg_pull_none>; + }; + + uart3m1_rts_gpio: uart3m1-rts-gpio { + rockchip,pins = + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + uart4 { + uart4_xfer: uart4-xfer { + rockchip,pins = + <1 RK_PD4 2 &pcfg_pull_up>, + <1 RK_PD5 2 &pcfg_pull_up>; + }; + + uart4_cts: uart4-cts { + rockchip,pins = + <1 RK_PD6 2 &pcfg_pull_none>; + }; + + uart4_rts: uart4-rts { + rockchip,pins = + <1 RK_PD7 2 &pcfg_pull_none>; + }; + }; + + uart5 { + uart5_xfer: uart5-xfer { + rockchip,pins = + <3 RK_PA2 4 &pcfg_pull_up>, + <3 RK_PA1 4 &pcfg_pull_up>; + }; + + uart5_cts: uart5-cts { + rockchip,pins = + <3 RK_PA3 4 &pcfg_pull_none>; + }; + + uart5_rts: uart5-rts { + rockchip,pins = + <3 RK_PA5 4 &pcfg_pull_none>; + }; + }; + + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = + <1 RK_PB7 3 &pcfg_pull_up_4ma>; + }; + + spi0_csn: spi0-csn { + rockchip,pins = + <1 RK_PB6 3 &pcfg_pull_up_4ma>; + }; + + spi0_miso: spi0-miso { + rockchip,pins = + <1 RK_PB5 3 &pcfg_pull_up_4ma>; + }; + + spi0_mosi: spi0-mosi { + rockchip,pins = + <1 RK_PB4 3 &pcfg_pull_up_4ma>; + }; + + spi0_clk_hs: spi0-clk-hs { + rockchip,pins = + <1 RK_PB7 3 &pcfg_pull_up_8ma>; + }; + + spi0_miso_hs: spi0-miso-hs { + rockchip,pins = + <1 RK_PB5 3 &pcfg_pull_up_8ma>; + }; + + spi0_mosi_hs: spi0-mosi-hs { + rockchip,pins = + <1 RK_PB4 3 &pcfg_pull_up_8ma>; + }; + }; + + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = + <3 RK_PB7 4 &pcfg_pull_up_4ma>; + }; + + spi1_csn0: spi1-csn0 { + rockchip,pins = + <3 RK_PB1 4 &pcfg_pull_up_4ma>; + }; + + spi1_csn1: spi1-csn1 { + rockchip,pins = + <3 RK_PB2 2 &pcfg_pull_up_4ma>; + }; + + spi1_miso: spi1-miso { + rockchip,pins = + <3 RK_PB6 4 &pcfg_pull_up_4ma>; + }; + + spi1_mosi: spi1-mosi { + rockchip,pins = + <3 RK_PB4 4 &pcfg_pull_up_4ma>; + }; + + spi1_clk_hs: spi1-clk-hs { + rockchip,pins = + <3 RK_PB7 4 &pcfg_pull_up_8ma>; + }; + + spi1_miso_hs: spi1-miso-hs { + rockchip,pins = + <3 RK_PB6 4 &pcfg_pull_up_8ma>; + }; + + spi1_mosi_hs: spi1-mosi-hs { + rockchip,pins = + <3 RK_PB4 4 &pcfg_pull_up_8ma>; + }; + }; + + pdm { + pdm_clk0m0: pdm-clk0m0 { + rockchip,pins = + <3 RK_PC6 2 &pcfg_pull_none>; + }; + + pdm_clk0m1: pdm-clk0m1 { + rockchip,pins = + <2 RK_PC6 1 &pcfg_pull_none>; + }; + + pdm_clk1: pdm-clk1 { + rockchip,pins = + <3 RK_PC7 2 &pcfg_pull_none>; + }; + + pdm_sdi0m0: pdm-sdi0m0 { + rockchip,pins = + <3 RK_PD3 2 &pcfg_pull_none>; + }; + + pdm_sdi0m1: pdm-sdi0m1 { + rockchip,pins = + <2 RK_PC5 2 &pcfg_pull_none>; + }; + + pdm_sdi1: pdm-sdi1 { + rockchip,pins = + <3 RK_PD0 2 &pcfg_pull_none>; + }; + + pdm_sdi2: pdm-sdi2 { + rockchip,pins = + <3 RK_PD1 2 &pcfg_pull_none>; + }; + + pdm_sdi3: pdm-sdi3 { + rockchip,pins = + <3 RK_PD2 2 &pcfg_pull_none>; + }; + + pdm_clk0m0_sleep: pdm-clk0m0-sleep { + rockchip,pins = + <3 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>; + }; + + pdm_clk0m_sleep1: pdm-clk0m1-sleep { + rockchip,pins = + <2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>; + }; + + pdm_clk1_sleep: pdm-clk1-sleep { + rockchip,pins = + <3 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>; + }; + + pdm_sdi0m0_sleep: pdm-sdi0m0-sleep { + rockchip,pins = + <3 RK_PD3 RK_FUNC_GPIO &pcfg_input_high>; + }; + + pdm_sdi0m1_sleep: pdm-sdi0m1-sleep { + rockchip,pins = + <2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>; + }; + + pdm_sdi1_sleep: pdm-sdi1-sleep { + rockchip,pins = + <3 RK_PD0 RK_FUNC_GPIO &pcfg_input_high>; + }; + + pdm_sdi2_sleep: pdm-sdi2-sleep { + rockchip,pins = + <3 RK_PD1 RK_FUNC_GPIO &pcfg_input_high>; + }; + + pdm_sdi3_sleep: pdm-sdi3-sleep { + rockchip,pins = + <3 RK_PD2 RK_FUNC_GPIO &pcfg_input_high>; + }; + }; + + i2s0 { + i2s0_8ch_mclk: i2s0-8ch-mclk { + rockchip,pins = + <3 RK_PC1 2 &pcfg_pull_none>; + }; + + i2s0_8ch_sclktx: i2s0-8ch-sclktx { + rockchip,pins = + <3 RK_PC3 2 &pcfg_pull_none>; + }; + + i2s0_8ch_sclkrx: i2s0-8ch-sclkrx { + rockchip,pins = + <3 RK_PB4 2 &pcfg_pull_none>; + }; + + i2s0_8ch_lrcktx: i2s0-8ch-lrcktx { + rockchip,pins = + <3 RK_PC2 2 &pcfg_pull_none>; + }; + + i2s0_8ch_lrckrx: i2s0-8ch-lrckrx { + rockchip,pins = + <3 RK_PB5 2 &pcfg_pull_none>; + }; + + i2s0_8ch_sdo0: i2s0-8ch-sdo0 { + rockchip,pins = + <3 RK_PC4 2 &pcfg_pull_none>; + }; + + i2s0_8ch_sdo1: i2s0-8ch-sdo1 { + rockchip,pins = + <3 RK_PC0 2 &pcfg_pull_none>; + }; + + i2s0_8ch_sdo2: i2s0-8ch-sdo2 { + rockchip,pins = + <3 RK_PB7 2 &pcfg_pull_none>; + }; + + i2s0_8ch_sdo3: i2s0-8ch-sdo3 { + rockchip,pins = + <3 RK_PB6 2 &pcfg_pull_none>; + }; + + i2s0_8ch_sdi0: i2s0-8ch-sdi0 { + rockchip,pins = + <3 RK_PC5 2 &pcfg_pull_none>; + }; + + i2s0_8ch_sdi1: i2s0-8ch-sdi1 { + rockchip,pins = + <3 RK_PB3 2 &pcfg_pull_none>; + }; + + i2s0_8ch_sdi2: i2s0-8ch-sdi2 { + rockchip,pins = + <3 RK_PB1 2 &pcfg_pull_none>; + }; + + i2s0_8ch_sdi3: i2s0-8ch-sdi3 { + rockchip,pins = + <3 RK_PB0 2 &pcfg_pull_none>; + }; + }; + + i2s1 { + i2s1_2ch_mclk: i2s1-2ch-mclk { + rockchip,pins = + <2 RK_PC3 1 &pcfg_pull_none>; + }; + + i2s1_2ch_sclk: i2s1-2ch-sclk { + rockchip,pins = + <2 RK_PC2 1 &pcfg_pull_none>; + }; + + i2s1_2ch_lrck: i2s1-2ch-lrck { + rockchip,pins = + <2 RK_PC1 1 &pcfg_pull_none>; + }; + + i2s1_2ch_sdi: i2s1-2ch-sdi { + rockchip,pins = + <2 RK_PC5 1 &pcfg_pull_none>; + }; + + i2s1_2ch_sdo: i2s1-2ch-sdo { + rockchip,pins = + <2 RK_PC4 1 &pcfg_pull_none>; + }; + }; + + i2s2 { + i2s2_2ch_mclk: i2s2-2ch-mclk { + rockchip,pins = + <3 RK_PA1 2 &pcfg_pull_none>; + }; + + i2s2_2ch_sclk: i2s2-2ch-sclk { + rockchip,pins = + <3 RK_PA2 2 &pcfg_pull_none>; + }; + + i2s2_2ch_lrck: i2s2-2ch-lrck { + rockchip,pins = + <3 RK_PA3 2 &pcfg_pull_none>; + }; + + i2s2_2ch_sdi: i2s2-2ch-sdi { + rockchip,pins = + <3 RK_PA5 2 &pcfg_pull_none>; + }; + + i2s2_2ch_sdo: i2s2-2ch-sdo { + rockchip,pins = + <3 RK_PA7 2 &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = + <1 RK_PD6 1 &pcfg_pull_none_8ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + <1 RK_PD7 1 &pcfg_pull_up_8ma>; + }; + + sdmmc_det: sdmmc-det { + rockchip,pins = + <0 RK_PA3 1 &pcfg_pull_up_8ma>; + }; + + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = + <1 RK_PD2 1 &pcfg_pull_up_8ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + <1 RK_PD2 1 &pcfg_pull_up_8ma>, + <1 RK_PD3 1 &pcfg_pull_up_8ma>, + <1 RK_PD4 1 &pcfg_pull_up_8ma>, + <1 RK_PD5 1 &pcfg_pull_up_8ma>; + }; + + sdmmc_gpio: sdmmc-gpio { + rockchip,pins = + <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up_4ma>; + }; + }; + + sdio { + sdio_clk: sdio-clk { + rockchip,pins = + <1 RK_PC5 1 &pcfg_pull_none>; + }; + + sdio_cmd: sdio-cmd { + rockchip,pins = + <1 RK_PC4 1 &pcfg_pull_up>; + }; + + sdio_bus4: sdio-bus4 { + rockchip,pins = + <1 RK_PC6 1 &pcfg_pull_up>, + <1 RK_PC7 1 &pcfg_pull_up>, + <1 RK_PD0 1 &pcfg_pull_up>, + <1 RK_PD1 1 &pcfg_pull_up>; + }; + + sdio_gpio: sdio-gpio { + rockchip,pins = + <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + emmc { + emmc_clk: emmc-clk { + rockchip,pins = + <1 RK_PB1 2 &pcfg_pull_none_8ma>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = + <1 RK_PB2 2 &pcfg_pull_up_8ma>; + }; + + emmc_pwren: emmc-pwren { + rockchip,pins = + <1 RK_PB0 2 &pcfg_pull_none>; + }; + + emmc_rstnout: emmc-rstnout { + rockchip,pins = + <1 RK_PB3 2 &pcfg_pull_none>; + }; + + emmc_bus1: emmc-bus1 { + rockchip,pins = + <1 RK_PA0 2 &pcfg_pull_up_8ma>; + }; + + emmc_bus4: emmc-bus4 { + rockchip,pins = + <1 RK_PA0 2 &pcfg_pull_up_8ma>, + <1 RK_PA1 2 &pcfg_pull_up_8ma>, + <1 RK_PA2 2 &pcfg_pull_up_8ma>, + <1 RK_PA3 2 &pcfg_pull_up_8ma>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = + <1 RK_PA0 2 &pcfg_pull_up_8ma>, + <1 RK_PA1 2 &pcfg_pull_up_8ma>, + <1 RK_PA2 2 &pcfg_pull_up_8ma>, + <1 RK_PA3 2 &pcfg_pull_up_8ma>, + <1 RK_PA4 2 &pcfg_pull_up_8ma>, + <1 RK_PA5 2 &pcfg_pull_up_8ma>, + <1 RK_PA6 2 &pcfg_pull_up_8ma>, + <1 RK_PA7 2 &pcfg_pull_up_8ma>; + }; + }; + + flash { + flash_cs0: flash-cs0 { + rockchip,pins = + <1 RK_PB0 1 &pcfg_pull_none>; + }; + + flash_rdy: flash-rdy { + rockchip,pins = + <1 RK_PB1 1 &pcfg_pull_none>; + }; + + flash_dqs: flash-dqs { + rockchip,pins = + <1 RK_PB2 1 &pcfg_pull_none>; + }; + + flash_ale: flash-ale { + rockchip,pins = + <1 RK_PB3 1 &pcfg_pull_none>; + }; + + flash_cle: flash-cle { + rockchip,pins = + <1 RK_PB4 1 &pcfg_pull_none>; + }; + + flash_wrn: flash-wrn { + rockchip,pins = + <1 RK_PB5 1 &pcfg_pull_none>; + }; + + flash_csl: flash-csl { + rockchip,pins = + <1 RK_PB6 1 &pcfg_pull_none>; + }; + + flash_rdn: flash-rdn { + rockchip,pins = + <1 RK_PB7 1 &pcfg_pull_none>; + }; + + flash_bus8: flash-bus8 { + rockchip,pins = + <1 RK_PA0 1 &pcfg_pull_up_12ma>, + <1 RK_PA1 1 &pcfg_pull_up_12ma>, + <1 RK_PA2 1 &pcfg_pull_up_12ma>, + <1 RK_PA3 1 &pcfg_pull_up_12ma>, + <1 RK_PA4 1 &pcfg_pull_up_12ma>, + <1 RK_PA5 1 &pcfg_pull_up_12ma>, + <1 RK_PA6 1 &pcfg_pull_up_12ma>, + <1 RK_PA7 1 &pcfg_pull_up_12ma>; + }; + }; + + lcdc { + lcdc_rgb_dclk_pin: lcdc-rgb-dclk-pin { + rockchip,pins = + <3 RK_PA0 1 &pcfg_pull_none_12ma>; + }; + + lcdc_rgb_m0_hsync_pin: lcdc-rgb-m0-hsync-pin { + rockchip,pins = + <3 RK_PA1 1 &pcfg_pull_none_12ma>; + }; + + lcdc_rgb_m0_vsync_pin: lcdc-rgb-m0-vsync-pin { + rockchip,pins = + <3 RK_PA2 1 &pcfg_pull_none_12ma>; + }; + + lcdc_rgb_m0_den_pin: lcdc-rgb-m0-den-pin { + rockchip,pins = + <3 RK_PA3 1 &pcfg_pull_none_12ma>; + }; + + lcdc_rgb888_m0_data_pins: lcdc-rgb888-m0-data-pins { + rockchip,pins = + <3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */ + <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */ + <3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */ + <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */ + <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */ + <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */ + <3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */ + <3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */ + <3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */ + <3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */ + <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */ + <3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */ + <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */ + <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */ + <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */ + <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */ + <3 RK_PC7 1 &pcfg_pull_none_8ma>, /* lcdc_d19 */ + <3 RK_PC6 1 &pcfg_pull_none_8ma>, /* lcdc_d18 */ + <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */ + <3 RK_PC4 1 &pcfg_pull_none_8ma>, /* lcdc_d16 */ + <3 RK_PD3 1 &pcfg_pull_none_8ma>, /* lcdc_d23 */ + <3 RK_PD2 1 &pcfg_pull_none_8ma>, /* lcdc_d22 */ + <3 RK_PD1 1 &pcfg_pull_none_8ma>, /* lcdc_d21 */ + <3 RK_PD0 1 &pcfg_pull_none_8ma>; /* lcdc_d20 */ + }; + + lcdc_rgb666_m0_data_pins: lcdc-rgb666-m0-data-pins { + rockchip,pins = + <3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */ + <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */ + <3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */ + <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */ + <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */ + <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */ + <3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */ + <3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */ + <3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */ + <3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */ + <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */ + <3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */ + <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */ + <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */ + <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */ + <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */ + <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */ + <3 RK_PC4 1 &pcfg_pull_none_8ma>; /* lcdc_d16 */ + }; + + lcdc_rgb565_m0_data_pins: lcdc-rgb565-m0-data-pins { + rockchip,pins = + <3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */ + <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */ + <3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */ + <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */ + <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */ + <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */ + <3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */ + <3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */ + <3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */ + <3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */ + <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */ + <3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */ + <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */ + <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */ + <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */ + <3 RK_PC0 1 &pcfg_pull_none_8ma>; /* lcdc_d12 */ + }; + + lcdc_rgb888_m1_data_pins: lcdc-rgb888-m1-data-pins { + rockchip,pins = + <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */ + <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */ + <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */ + <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */ + <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */ + <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */ + <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */ + <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */ + <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */ + <3 RK_PC7 1 &pcfg_pull_none_8ma>, /* lcdc_d19 */ + <3 RK_PC6 1 &pcfg_pull_none_8ma>, /* lcdc_d18 */ + <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */ + <3 RK_PC4 1 &pcfg_pull_none_8ma>, /* lcdc_d16 */ + <3 RK_PD3 1 &pcfg_pull_none_8ma>, /* lcdc_d23 */ + <3 RK_PD2 1 &pcfg_pull_none_8ma>, /* lcdc_d22 */ + <3 RK_PD1 1 &pcfg_pull_none_8ma>, /* lcdc_d21 */ + <3 RK_PD0 1 &pcfg_pull_none_8ma>; /* lcdc_d20 */ + }; + + lcdc_rgb666_m1_data_pins: lcdc-rgb666-m1-data-pins { + rockchip,pins = + <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */ + <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */ + <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */ + <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */ + <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */ + <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */ + <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */ + <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */ + <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */ + <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */ + <3 RK_PC4 1 &pcfg_pull_none_8ma>; /* lcdc_d16 */ + }; + + lcdc_rgb565_m1_data_pins: lcdc-rgb565-m1-data-pins { + rockchip,pins = + <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */ + <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */ + <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */ + <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */ + <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */ + <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */ + <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */ + <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */ + <3 RK_PC0 1 &pcfg_pull_none_8ma>; /* lcdc_d12 */ + }; + }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = + <0 RK_PB7 1 &pcfg_pull_none>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = + <0 RK_PC0 1 &pcfg_pull_none>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = + <2 RK_PB5 1 &pcfg_pull_none>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = + <0 RK_PC1 1 &pcfg_pull_none>; + }; + }; + + pwm4 { + pwm4_pin: pwm4-pin { + rockchip,pins = + <3 RK_PC2 3 &pcfg_pull_none>; + }; + }; + + pwm5 { + pwm5_pin: pwm5-pin { + rockchip,pins = + <3 RK_PC3 3 &pcfg_pull_none>; + }; + }; + + pwm6 { + pwm6_pin: pwm6-pin { + rockchip,pins = + <3 RK_PC4 3 &pcfg_pull_none>; + }; + }; + + pwm7 { + pwm7_pin: pwm7-pin { + rockchip,pins = + <3 RK_PC5 3 &pcfg_pull_none>; + }; + }; + + gmac { + rmii_pins: rmii-pins { + rockchip,pins = + <2 RK_PA0 2 &pcfg_pull_none_12ma>, /* mac_txen */ + <2 RK_PA1 2 &pcfg_pull_none_12ma>, /* mac_txd1 */ + <2 RK_PA2 2 &pcfg_pull_none_12ma>, /* mac_txd0 */ + <2 RK_PA3 2 &pcfg_pull_none>, /* mac_rxd0 */ + <2 RK_PA4 2 &pcfg_pull_none>, /* mac_rxd1 */ + <2 RK_PA5 2 &pcfg_pull_none>, /* mac_rxer */ + <2 RK_PA6 2 &pcfg_pull_none>, /* mac_rxdv */ + <2 RK_PA7 2 &pcfg_pull_none>, /* mac_mdio */ + <2 RK_PB1 2 &pcfg_pull_none>; /* mac_mdc */ + }; + + mac_refclk_12ma: mac-refclk-12ma { + rockchip,pins = + <2 RK_PB2 2 &pcfg_pull_none_12ma>; + }; + + mac_refclk: mac-refclk { + rockchip,pins = + <2 RK_PB2 2 &pcfg_pull_none>; + }; + }; + + cif-m0 { + cif_clkout_m0: cif-clkout-m0 { + rockchip,pins = + <2 RK_PB3 1 &pcfg_pull_none>; + }; + + dvp_d2d9_m0: dvp-d2d9-m0 { + rockchip,pins = + <2 RK_PA0 1 &pcfg_pull_none>, /* cif_data2 */ + <2 RK_PA1 1 &pcfg_pull_none>, /* cif_data3 */ + <2 RK_PA2 1 &pcfg_pull_none>, /* cif_data4 */ + <2 RK_PA3 1 &pcfg_pull_none>, /* cif_data5 */ + <2 RK_PA4 1 &pcfg_pull_none>, /* cif_data6 */ + <2 RK_PA5 1 &pcfg_pull_none>, /* cif_data7 */ + <2 RK_PA6 1 &pcfg_pull_none>, /* cif_data8 */ + <2 RK_PA7 1 &pcfg_pull_none>, /* cif_data9 */ + <2 RK_PB0 1 &pcfg_pull_none>, /* cif_sync */ + <2 RK_PB1 1 &pcfg_pull_none>, /* cif_href */ + <2 RK_PB2 1 &pcfg_pull_none>, /* cif_clkin */ + <2 RK_PB3 1 &pcfg_pull_none>; /* cif_clkout */ + }; + + dvp_d0d1_m0: dvp-d0d1-m0 { + rockchip,pins = + <2 RK_PB4 1 &pcfg_pull_none>, /* cif_data0 */ + <2 RK_PB6 1 &pcfg_pull_none>; /* cif_data1 */ + }; + + dvp_d10d11_m0:d10-d11-m0 { + rockchip,pins = + <2 RK_PB7 1 &pcfg_pull_none>, /* cif_data10 */ + <2 RK_PC0 1 &pcfg_pull_none>; /* cif_data11 */ + }; + }; + + cif-m1 { + cif_clkout_m1: cif-clkout-m1 { + rockchip,pins = + <3 RK_PD0 3 &pcfg_pull_none>; + }; + + dvp_d2d9_m1: dvp-d2d9-m1 { + rockchip,pins = + <3 RK_PA3 3 &pcfg_pull_none>, /* cif_data2 */ + <3 RK_PA5 3 &pcfg_pull_none>, /* cif_data3 */ + <3 RK_PA7 3 &pcfg_pull_none>, /* cif_data4 */ + <3 RK_PB0 3 &pcfg_pull_none>, /* cif_data5 */ + <3 RK_PB1 3 &pcfg_pull_none>, /* cif_data6 */ + <3 RK_PB4 3 &pcfg_pull_none>, /* cif_data7 */ + <3 RK_PB6 3 &pcfg_pull_none>, /* cif_data8 */ + <3 RK_PB7 3 &pcfg_pull_none>, /* cif_data9 */ + <3 RK_PD1 3 &pcfg_pull_none>, /* cif_sync */ + <3 RK_PD2 3 &pcfg_pull_none>, /* cif_href */ + <3 RK_PD3 3 &pcfg_pull_none>, /* cif_clkin */ + <3 RK_PD0 3 &pcfg_pull_none>; /* cif_clkout */ + }; + + dvp_d0d1_m1: dvp-d0d1-m1 { + rockchip,pins = + <3 RK_PA1 3 &pcfg_pull_none>, /* cif_data0 */ + <3 RK_PA2 3 &pcfg_pull_none>; /* cif_data1 */ + }; + + dvp_d10d11_m1:d10-d11-m1 { + rockchip,pins = + <3 RK_PC6 3 &pcfg_pull_none>, /* cif_data10 */ + <3 RK_PC7 3 &pcfg_pull_none>; /* cif_data11 */ + }; + }; + + isp { + isp_prelight: isp-prelight { + rockchip,pins = + <3 RK_PD1 4 &pcfg_pull_none>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts index 246c317f6a68..99d0d9912950 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts @@ -41,6 +41,19 @@ vin-supply = <&vcc_io>; }; + vcc_sdio: sdmmcio-regulator { + compatible = "regulator-gpio"; + gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + regulator-name = "vcc_sdio"; + regulator-type = "voltage"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -208,6 +221,18 @@ }; }; +&io_domains { + status = "okay"; + + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc18_emmc>; + vccio3-supply = <&vcc_sdio>; + vccio4-supply = <&vcc_18>; + vccio5-supply = <&vcc_io>; + vccio6-supply = <&vcc_io>; + pmuio-supply = <&vcc_io>; +}; + &pinctrl { pmic { pmic_int_l: pmic-int-l { @@ -230,7 +255,12 @@ max-frequency = <150000000>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vcc_sdio>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 5272e887a434..dc20145dd393 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -46,7 +46,7 @@ vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb20_host_drv>; regulator-name = "vcc_host1_5v"; @@ -62,6 +62,23 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + sound { + compatible = "audio-graph-card"; + label = "rockchip,rk3328"; + dais = <&spdif_p0>; + }; + + spdif-dit { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + + port { + dit_p0_0: endpoint { + remote-endpoint = <&spdif_p0_0>; + }; + }; + }; }; &cpu0 { @@ -108,6 +125,14 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmiphy { + status = "okay"; +}; + &i2c1 { status = "okay"; @@ -238,7 +263,7 @@ usb2 { usb20_host_drv: usb20-host-drv { - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -261,6 +286,30 @@ status = "okay"; }; +&spdif { + pinctrl-0 = <&spdifm0_tx>; + status = "okay"; + #sound-dai-cells = <0>; + + spdif_p0: port { + spdif_p0_0: endpoint { + remote-endpoint = <&dit_p0_0>; + }; + }; +}; + +&spi0 { + status = "okay"; + + spiflash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + + /* maximum speed for Rockchip SPI */ + spi-max-frequency = <50000000>; + }; +}; + &tsadc { rockchip,hw-tshut-mode = <0>; rockchip,hw-tshut-polarity = <0>; @@ -295,3 +344,11 @@ &usb_host0_ohci { status = "okay"; }; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 3f5a2944300f..e1a33dd981e0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -151,6 +151,11 @@ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; + display_subsystem: display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop_out>; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; @@ -249,6 +254,12 @@ status = "disabled"; }; + grf_gpio: grf-gpio { + compatible = "rockchip,rk3328-grf-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + power: power-controller { compatible = "rockchip,rk3328-power-controller"; #power-domain-cells = <1>; @@ -274,7 +285,6 @@ mode-bootloader = <BOOT_FASTBOOT>; mode-loader = <BOOT_BL_DOWNLOAD>; }; - }; uart0: serial@ff110000 { @@ -600,6 +610,28 @@ status = "disabled"; }; + vop: vop@ff370000 { + compatible = "rockchip,rk3328-vop"; + reg = <0x0 0xff370000 0x0 0x3efc>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP>, <&cru DCLK_LCDC>, <&cru HCLK_VOP>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>; + reset-names = "axi", "ahb", "dclk"; + iommus = <&vop_mmu>; + status = "disabled"; + + vop_out: port { + #address-cells = <1>; + #size-cells = <0>; + + vop_out_hdmi: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_in_vop>; + }; + }; + }; + vop_mmu: iommu@ff373f00 { compatible = "rockchip,iommu"; reg = <0x0 0xff373f00 0x0 0x100>; @@ -611,6 +643,46 @@ status = "disabled"; }; + hdmi: hdmi@ff3c0000 { + compatible = "rockchip,rk3328-dw-hdmi"; + reg = <0x0 0xff3c0000 0x0 0x20000>; + reg-io-width = <4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMI>, + <&cru SCLK_HDMI_SFC>; + clock-names = "iahb", + "isfr"; + phys = <&hdmiphy>; + phy-names = "hdmi"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + hdmi_in: port { + hdmi_in_vop: endpoint { + remote-endpoint = <&vop_out_hdmi>; + }; + }; + }; + }; + + hdmiphy: phy@ff430000 { + compatible = "rockchip,rk3328-hdmi-phy"; + reg = <0x0 0xff430000 0x0 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMIPHY>, <&xin24m>, <&cru DCLK_HDMIPHY>; + clock-names = "sysclk", "refoclk", "refpclk"; + clock-output-names = "hdmi_phy"; + #clock-cells = <0>; + nvmem-cells = <&efuse_cpu_version>; + nvmem-cell-names = "cpu-version"; + #phy-cells = <0>; + status = "disabled"; + }; + cru: clock-controller@ff440000 { compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon"; reg = <0x0 0xff440000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts index 8978d924eb83..cce266da28cd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts @@ -7,8 +7,7 @@ */ /dts-v1/; -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" +#include "rk3399-rock960.dtsi" / { model = "96boards RK3399 Ficus"; @@ -24,97 +23,6 @@ clock-output-names = "clkin_gmac"; #clock-cells = <0>; }; - - vcc1v8_s0: vcc1v8-s0 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_s0"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcc_sys: vcc-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - vcc3v3_pcie: vcc3v3-pcie-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_drv>; - regulator-boot-on; - regulator-name = "vcc3v3_pcie"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc3v3_sys>; - }; - - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&host_vbus_drv>; - regulator-name = "vcc5v0_host"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 0>; - regulator-name = "vdd_log"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - }; - -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&emmc_phy { - status = "okay"; }; &gmac { @@ -133,279 +41,8 @@ status = "okay"; }; -&hdmi { - ddc-i2c-bus = <&i2c3>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <168>; - i2c-scl-falling-time-ns = <4>; - status = "okay"; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - status = "okay"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc_sys>; - vcc10-supply = <&vcc_sys>; - vcc11-supply = <&vcc_sys>; - vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc_1v8>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc1v8_dvp: LDO_REG1 { - regulator-name = "vcc1v8_dvp"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_hdmi: LDO_REG2 { - regulator-name = "vcca1v8_hdmi"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca_1v8: LDO_REG3 { - regulator-name = "vcca_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sd: LDO_REG4 { - regulator-name = "vcc_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc3v0_sd: LDO_REG5 { - regulator-name = "vcc3v0_sd"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcca0v9_hdmi: LDO_REG7 { - regulator-name = "vcca0v9_hdmi"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_s3: SWITCH_REG1 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - }; - }; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; -}; - -&i2c3 { - status = "okay"; -}; - -&i2c4 { - status = "okay"; -}; - -&io_domains { - bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */ - audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */ - sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */ - gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */ - status = "okay"; -}; - -&pcie_phy { - status = "okay"; -}; - &pcie0 { ep-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqn_cpm>; - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&pmu_io_domains { - pmu1830-supply = <&vcc_1v8>; - status = "okay"; }; &pinctrl { @@ -416,31 +53,6 @@ }; }; - sdmmc { - sdmmc_bus1: sdmmc-bus1 { - rockchip,pins = - <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>; - }; - - sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = - <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>, - <4 9 RK_FUNC_1 &pcfg_pull_up_8ma>, - <4 10 RK_FUNC_1 &pcfg_pull_up_8ma>, - <4 11 RK_FUNC_1 &pcfg_pull_up_8ma>; - }; - - sdmmc_clk: sdmmc-clk { - rockchip,pins = - <4 12 RK_FUNC_1 &pcfg_pull_none_18ma>; - }; - - sdmmc_cmd: sdmmc-cmd { - rockchip,pins = - <4 13 RK_FUNC_1 &pcfg_pull_up_8ma>; - }; - }; - pcie { pcie_drv: pcie-drv { rockchip,pins = @@ -448,23 +60,6 @@ }; }; - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = - <1 21 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - vsel1_gpio: vsel1-gpio { - rockchip,pins = - <1 17 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_gpio: vsel2-gpio { - rockchip,pins = - <1 14 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - usb2 { host_vbus_drv: host-vbus-drv { rockchip,pins = @@ -473,127 +68,18 @@ }; }; -&pwm2 { - status = "okay"; -}; - -&pwm3 { - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - non-removable; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - clock-frequency = <100000000>; - clock-freq-min-max = <100000 100000000>; - disable-wp; - sd-uhs-sdr104; - vqmmc-supply = <&vcc_sd>; - card-detect-delay = <800>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; - status = "okay"; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy1 { - status = "okay"; -}; - -&u2phy0 { - status = "okay"; -}; - -&u2phy1 { - status = "okay"; -}; - -&u2phy0_host { - phy-supply = <&vcc5v0_host>; - status = "okay"; -}; - -&u2phy1_host { - phy-supply = <&vcc5v0_host>; - status = "okay"; -}; - -&u2phy0_otg { - status = "okay"; -}; - -&u2phy1_otg { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - &usbdrd_dwc3_0 { - status = "okay"; dr_mode = "host"; }; -&usbdrd3_1 { - status = "okay"; -}; - &usbdrd_dwc3_1 { - status = "okay"; dr_mode = "host"; }; -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; +&vcc3v3_pcie { + gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>; }; -&vopl_mmu { - status = "okay"; +&vcc5v0_host { + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index 38336ab57cc4..c706db0ee9ec 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -622,6 +622,12 @@ }; }; + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + leds { work_led_gpio: work_led-gpio { rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; @@ -646,6 +652,36 @@ status = "okay"; }; +&sdio0 { + /* WiFi & BT combo module Ampak AP6356S */ + bus-width = <4>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + + /* Power supply */ + vqmmc-supply = &vcc1v8_s3; /* IO line */ + vmmc-supply = &vcc_sdio; /* card's power */ + + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + brcm,drive-strength = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index e0d64f862322..2dceeea29b83 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -131,7 +131,7 @@ status = "okay"; clock-frequency = <400000>; - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&sgtl5000_clk>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts new file mode 100644 index 000000000000..19f7732d728c --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts @@ -0,0 +1,680 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd + */ + +/dts-v1/; +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Firefly ROC-RK3399-PC Board"; + compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 25000 0>; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + vcc_vbus_typec0: vcc-vbus-typec0 { + compatible = "regulator-fixed"; + regulator-name = "vcc_vbus_typec0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + /* + * should be placed inside mp8859, but not until mp8859 has + * its own dt-binding. + */ + vcc12v_sys: mp8859-dcdc1 { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <&vcc_vbus_typec0>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc12v_sys>; + }; + + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en &hub_rst>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc_vbus_typec1: vcc-vbus-typec1 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_vbus_typec1_en>; + regulator-name = "vcc_vbus_typec1"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_sys>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vcc3v3_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + vcc10-supply = <&vcc3v3_sys>; + vcc11-supply = <&vcc3v3_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc1v8_pmu>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_codec: LDO_REG1 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_hdmi: LDO_REG2 { + regulator-name = "vcc1v8_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmu: LDO_REG3 { + regulator-name = "vcc1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca0v9_hdmi: LDO_REG7 { + regulator-name = "vcca0v9_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: vcc_lan: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_gpio>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + fusb1: usb-typec@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb1_int>; + vbus-supply = <&vcc_vbus_typec1>; + status = "okay"; + }; +}; + +&i2c7 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + fusb0: usb-typec@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc_vbus_typec0>; + status = "okay"; + }; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + audio-supply = <&vcca1v8_codec>; + bt656-supply = <&vcc_3v0>; + gpio1830-supply = <&vcc_3v0>; + sdmmc-supply = <&vcc_sdio>; + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pinctrl { + lcd-panel { + lcd_panel_reset: lcd-panel-reset { + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hub_rst: hub-rst { + rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + usb-typec { + vcc_vbus_typec1_en: vcc-vbus-typec1-en { + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + fusb30x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + fusb1_int: fusb1-int { + rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + phy-supply = <&vcc_vbus_typec0>; + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + phy-supply = <&vcc_vbus_typec1>; + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts new file mode 100644 index 000000000000..3c3308daec98 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Linaro Ltd. + */ + +/dts-v1/; +#include "rk3399-rock960.dtsi" + +/ { + model = "96boards Rock960"; + compatible = "vamrs,rock960", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; +}; + +&pcie0 { + ep-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; +}; + +&pinctrl { + pcie { + pcie_drv: pcie-drv { + rockchip,pins = + <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb2 { + host_vbus_drv: host-vbus-drv { + rockchip,pins = + <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&usbdrd_dwc3_0 { + dr_mode = "otg"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; + +&vcc3v3_pcie { + gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; +}; + +&vcc5v0_host { + gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi new file mode 100644 index 000000000000..6c8c4ab044aa --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi @@ -0,0 +1,542 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Collabora Ltd. + * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd. + * Copyright (c) 2018 Linaro Ltd. + */ + +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + vcc1v8_s0: vcc1v8-s0 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_drv>; + regulator-boot-on; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc5v0_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 0>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + status = "okay"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_hdmi: LDO_REG2 { + regulator-name = "vcca1v8_hdmi"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sd: LDO_REG4 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc3v0_sd: LDO_REG5 { + regulator-name = "vcc3v0_sd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca0v9_hdmi: LDO_REG7 { + regulator-name = "vcca0v9_hdmi"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&io_domains { + bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */ + audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */ + sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */ + gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */ + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn_cpm>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_1v8>; + status = "okay"; +}; + +&pinctrl { + sdmmc { + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = + <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>, + <4 9 RK_FUNC_1 &pcfg_pull_up_8ma>, + <4 10 RK_FUNC_1 &pcfg_pull_up_8ma>, + <4 11 RK_FUNC_1 &pcfg_pull_up_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = + <4 12 RK_FUNC_1 &pcfg_pull_none_18ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + <4 13 RK_FUNC_1 &pcfg_pull_up_8ma>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <1 21 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = + <1 17 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = + <1 14 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + clock-frequency = <100000000>; + clock-freq-min-max = <100000 100000000>; + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + disable-wp; + sd-uhs-sdr104; + vqmmc-supply = <&vcc_sd>; + card-detect-delay = <800>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy0_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy1_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts new file mode 100644 index 000000000000..1d35f5406b5e --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts @@ -0,0 +1,692 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> + */ + +/dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Pine64 RockPro64"; + compatible = "pine64,rockpro64", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; + + work-led { + label = "work"; + default-state = "on"; + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; + }; + + diy-led { + label = "diy"; + default-state = "off"; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwr_en>; + regulator-name = "vcc3v3_pcie"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc_12v>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; + }; + + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vcc_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc1v8_pmu>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc2v8_dvp: LDO_REG2 { + regulator-name = "vcc2v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmu: LDO_REG3 { + regulator-name = "vcc1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: vcc_lan: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <0>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc5v0_typec>; + status = "okay"; + }; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + bt656-supply = <&vcc1v8_dvp>; + audio-supply = <&vcca1v8_codec>; + sdmmc-supply = <&vcc_sdio>; + gpio1830-supply = <&vcc_3v0>; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pinctrl { + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + fusb302x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + work_led_gpio: work_led-gpio { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + diy_led_gpio: diy_led-gpio { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + lcd-panel { + lcd_panel_reset: lcd-panel-reset { + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pcie { + pcie_pwr_en: pcie-pwr-en { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + vcc5v0_typec_en: vcc5v0_typec_en { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index 36b60791c156..5421e23760c3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -93,6 +93,19 @@ vin-supply = <&vcc_1v8>; }; + vcc3v0_sd: vcc3v0-sd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_pwr_h>; + regulator-always-on; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + regulator-name = "vcc3v0_sd"; + vin-supply = <&vcc3v3_sys>; + }; + vcc3v3_sys: vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; @@ -103,20 +116,10 @@ vin-supply = <&vcc_sys>; }; - vcc_sys: vcc-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; - }; - vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; regulator-name = "vcc5v0_host"; @@ -124,6 +127,26 @@ vin-supply = <&vcc_sys>; }; + vcc5v0_typec0: vcc5v0-typec0-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec0_en>; + regulator-name = "vcc5v0_typec0"; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + vdd_log: vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>; @@ -208,7 +231,7 @@ #clock-cells = <1>; clock-output-names = "xin32k", "rk808-clkout2"; pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l &pmic_dvs2>; + pinctrl-0 = <&pmic_int_l>; rockchip,system-power-controller; wakeup-source; @@ -310,7 +333,7 @@ regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3000000>; @@ -455,11 +478,6 @@ <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; - pmic_dvs2: pmic-dvs2 { - rockchip,pins = - <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; - }; - vsel1_gpio: vsel1-gpio { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; @@ -469,11 +487,22 @@ }; }; + sd { + sdmmc0_pwr_h: sdmmc0-pwr-h { + rockchip,pins = + <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + usb2 { vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; + vcc5v0_typec0_en: vcc5v0-typec0-en { + rockchip,pins = + <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; }; }; @@ -499,6 +528,7 @@ }; &sdmmc { + broken-cd; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; @@ -507,6 +537,7 @@ max-frequency = <150000000>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc3v0_sd>; vqmmc-supply = <&vcc_sdio>; status = "okay"; }; @@ -531,6 +562,7 @@ status = "okay"; u2phy0_otg: otg-port { + phy-supply = <&vcc5v0_typec0>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index c88e603396f6..99e7f65c1779 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -74,6 +74,7 @@ clocks = <&cru ARMCLKL>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu_l1: cpu@1 { @@ -84,6 +85,7 @@ clocks = <&cru ARMCLKL>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu_l2: cpu@2 { @@ -94,6 +96,7 @@ clocks = <&cru ARMCLKL>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu_l3: cpu@3 { @@ -104,6 +107,7 @@ clocks = <&cru ARMCLKL>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu_b0: cpu@100 { @@ -114,6 +118,7 @@ clocks = <&cru ARMCLKB>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <436>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu_b1: cpu@101 { @@ -124,6 +129,29 @@ clocks = <&cru ARMCLKB>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <436>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <120>; + exit-latency-us = <250>; + min-residency-us = <900>; + }; + + CLUSTER_SLEEP: cluster-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <2000>; + }; }; }; @@ -1720,6 +1748,8 @@ resets = <&cru SRST_P_MIPI_DSI0>; reset-names = "apb"; rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; ports { @@ -1754,6 +1784,8 @@ resets = <&cru SRST_P_MIPI_DSI1>; reset-names = "apb"; rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index d63b56e944de..31ba52b14e99 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -116,6 +116,28 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + spi0: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi1: spi@54006100 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006100 0x100>; + interrupts = <0 216 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -432,6 +454,8 @@ <&mio_clk 12>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>; + phy-names = "usb"; + phys = <&usb_phy0>; has-transaction-translator; }; @@ -446,6 +470,8 @@ <&mio_clk 13>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>; + phy-names = "usb"; + phys = <&usb_phy1>; has-transaction-translator; }; @@ -460,6 +486,8 @@ <&mio_clk 14>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>; + phy-names = "usb"; + phys = <&usb_phy2>; has-transaction-translator; }; @@ -488,6 +516,27 @@ pinctrl: pinctrl { compatible = "socionext,uniphier-ld11-pinctrl"; }; + + usb-phy { + compatible = "socionext,uniphier-ld11-usb2-phy"; + #address-cells = <1>; + #size-cells = <0>; + + usb_phy0: phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + usb_phy1: phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + + usb_phy2: phy@2 { + reg = <2>; + #phy-cells = <0>; + }; + }; }; soc-glue@5f900000 { @@ -571,7 +620,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts index 1a5e7c24b901..d7ae28afef7d 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts @@ -148,3 +148,7 @@ &nand { status = "okay"; }; + +&usb { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts index 440c2e6a638b..406244a5c8e8 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts @@ -75,3 +75,7 @@ drive-strength = <9>; }; }; + +&usb { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index caf112629caa..d7e2d8969601 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -224,6 +224,50 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + spi0: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi1: spi@54006100 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006100 0x100>; + interrupts = <0 216 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi2: spi@54006200 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006200 0x100>; + interrupts = <0 229 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi3: spi@54006300 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006300 0x100>; + interrupts = <0 230 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi3>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -528,6 +572,20 @@ cdns,phy-dll-delay-sdclk-hsmmc = <21>; }; + sd: sdhc@5a400000 { + compatible = "socionext,uniphier-sd-v3.1.1"; + status = "disabled"; + reg = <0x5a400000 0x800>; + interrupts = <0 76 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd>; + clocks = <&sd_clk 0>; + reset-names = "host"; + resets = <&sd_rst 0>; + bus-width = <4>; + cap-sd-highspeed; + }; + soc_glue: soc-glue@5f800000 { compatible = "socionext,uniphier-ld20-soc-glue", "simple-mfd", "syscon"; @@ -553,6 +611,50 @@ efuse@200 { compatible = "socionext,uniphier-efuse"; reg = <0x200 0x68>; + #address-cells = <1>; + #size-cells = <1>; + + /* USB cells */ + usb_rterm0: trim@54,4 { + reg = <0x54 1>; + bits = <4 2>; + }; + usb_rterm1: trim@55,4 { + reg = <0x55 1>; + bits = <4 2>; + }; + usb_rterm2: trim@58,4 { + reg = <0x58 1>; + bits = <4 2>; + }; + usb_rterm3: trim@59,4 { + reg = <0x59 1>; + bits = <4 2>; + }; + usb_sel_t0: trim@54,0 { + reg = <0x54 1>; + bits = <0 4>; + }; + usb_sel_t1: trim@55,0 { + reg = <0x55 1>; + bits = <0 4>; + }; + usb_sel_t2: trim@58,0 { + reg = <0x58 1>; + bits = <0 4>; + }; + usb_sel_t3: trim@59,0 { + reg = <0x59 1>; + bits = <0 4>; + }; + usb_hs_i0: trim@56,0 { + reg = <0x56 1>; + bits = <0 4>; + }; + usb_hs_i2: trim@5a,0 { + reg = <0x5a 1>; + bits = <0 4>; + }; }; }; @@ -620,6 +722,156 @@ }; }; + usb: usb@65a00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65a00000 0xcd00>; + interrupt-names = "host"; + interrupts = <0 134 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb1>, + <&pinctrl_usb2>, <&pinctrl_usb3>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>; + resets = <&usb_rst 15>; + phys = <&usb_hsphy0>, <&usb_hsphy1>, + <&usb_hsphy2>, <&usb_hsphy3>, + <&usb_ssphy0>, <&usb_ssphy1>; + dr_mode = "host"; + }; + + usb-glue@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_rst: reset@0 { + compatible = "socionext,uniphier-ld20-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb_vbus0: regulator@100 { + compatible = "socionext,uniphier-ld20-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb_vbus1: regulator@110 { + compatible = "socionext,uniphier-ld20-usb3-regulator"; + reg = <0x110 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb_vbus2: regulator@120 { + compatible = "socionext,uniphier-ld20-usb3-regulator"; + reg = <0x120 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb_vbus3: regulator@130 { + compatible = "socionext,uniphier-ld20-usb3-regulator"; + reg = <0x130 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb_vbus0>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, + <&usb_hs_i0>; + }; + + usb_hsphy1: hs-phy@210 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x210 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb_vbus1>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>, + <&usb_hs_i0>; + }; + + usb_hsphy2: hs-phy@220 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x220 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 17>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 17>; + vbus-supply = <&usb_vbus2>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>, + <&usb_hs_i2>; + }; + + usb_hsphy3: hs-phy@230 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x230 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 17>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 17>; + vbus-supply = <&usb_vbus3>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>, + <&usb_hs_i2>; + }; + + usb_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-ld20-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 18>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 18>; + vbus-supply = <&usb_vbus0>; + }; + + usb_ssphy1: ss-phy@310 { + compatible = "socionext,uniphier-ld20-usb3-ssphy"; + reg = <0x310 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 19>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 19>; + vbus-supply = <&usb_vbus1>; + }; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; @@ -628,7 +880,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts index c1bb607bd211..a41f7cac952a 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts @@ -75,6 +75,10 @@ status = "okay"; }; +&sd { + status = "okay"; +}; + ð0 { status = "okay"; phy-handle = <ðphy0>; @@ -100,3 +104,11 @@ &nand { status = "okay"; }; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index 2a4cf427f5d3..4f57c9e9d7a8 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -144,6 +144,28 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + spi0: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi1: spi@54006100 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006100 0x100>; + interrupts = <0 216 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -341,6 +363,24 @@ cdns,phy-dll-delay-sdclk-hsmmc = <21>; }; + sd: sdhc@5a400000 { + compatible = "socionext,uniphier-sd-v3.1.1"; + status = "disabled"; + reg = <0x5a400000 0x800>; + interrupts = <0 76 4>; + pinctrl-names = "default", "uhs"; + pinctrl-0 = <&pinctrl_sd>; + pinctrl-1 = <&pinctrl_sd_uhs>; + clocks = <&sd_clk 0>; + reset-names = "host"; + resets = <&sd_rst 0>; + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + }; + soc_glue: soc-glue@5f800000 { compatible = "socionext,uniphier-pxs3-soc-glue", "simple-mfd", "syscon"; @@ -366,6 +406,50 @@ efuse@200 { compatible = "socionext,uniphier-efuse"; reg = <0x200 0x68>; + #address-cells = <1>; + #size-cells = <1>; + + /* USB cells */ + usb_rterm0: trim@54,4 { + reg = <0x54 1>; + bits = <4 2>; + }; + usb_rterm1: trim@55,4 { + reg = <0x55 1>; + bits = <4 2>; + }; + usb_rterm2: trim@58,4 { + reg = <0x58 1>; + bits = <4 2>; + }; + usb_rterm3: trim@59,4 { + reg = <0x59 1>; + bits = <4 2>; + }; + usb_sel_t0: trim@54,0 { + reg = <0x54 1>; + bits = <0 4>; + }; + usb_sel_t1: trim@55,0 { + reg = <0x55 1>; + bits = <0 4>; + }; + usb_sel_t2: trim@58,0 { + reg = <0x58 1>; + bits = <0 4>; + }; + usb_sel_t3: trim@59,0 { + reg = <0x59 1>; + bits = <0 4>; + }; + usb_hs_i0: trim@56,0 { + reg = <0x56 1>; + bits = <0 4>; + }; + usb_hs_i2: trim@5a,0 { + reg = <0x5a 1>; + bits = <0 4>; + }; }; }; @@ -447,6 +531,202 @@ }; }; + usb0: usb@65a00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65a00000 0xcd00>; + interrupt-names = "host", "peripheral"; + interrupts = <0 134 4>, <0 135 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>; + resets = <&usb0_rst 15>; + phys = <&usb0_hsphy0>, <&usb0_hsphy1>, + <&usb0_ssphy0>, <&usb0_ssphy1>; + dr_mode = "host"; + }; + + usb-glue@65b00000 { + compatible = "socionext,uniphier-pxs3-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb0_rst: reset@0 { + compatible = "socionext,uniphier-pxs3-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 12>; + reset-names = "link"; + resets = <&sys_rst 12>; + }; + + usb0_vbus0: regulator@100 { + compatible = "socionext,uniphier-pxs3-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "link"; + clocks = <&sys_clk 12>; + reset-names = "link"; + resets = <&sys_rst 12>; + }; + + usb0_vbus1: regulator@110 { + compatible = "socionext,uniphier-pxs3-usb3-regulator"; + reg = <0x110 0x10>; + clock-names = "link"; + clocks = <&sys_clk 12>; + reset-names = "link"; + resets = <&sys_rst 12>; + }; + + usb0_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-pxs3-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 12>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 12>, <&sys_rst 16>; + vbus-supply = <&usb0_vbus0>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, + <&usb_hs_i0>; + }; + + usb0_hsphy1: hs-phy@210 { + compatible = "socionext,uniphier-pxs3-usb3-hsphy"; + reg = <0x210 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 12>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 12>, <&sys_rst 16>; + vbus-supply = <&usb0_vbus1>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>, + <&usb_hs_i0>; + }; + + usb0_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-pxs3-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 12>, <&sys_clk 17>; + reset-names = "link", "phy"; + resets = <&sys_rst 12>, <&sys_rst 17>; + vbus-supply = <&usb0_vbus0>; + }; + + usb0_ssphy1: ss-phy@310 { + compatible = "socionext,uniphier-pxs3-usb3-ssphy"; + reg = <0x310 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 12>, <&sys_clk 18>; + reset-names = "link", "phy"; + resets = <&sys_rst 12>, <&sys_rst 18>; + vbus-supply = <&usb0_vbus1>; + }; + }; + + usb1: usb@65c00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65c00000 0xcd00>; + interrupt-names = "host", "peripheral"; + interrupts = <0 137 4>, <0 138 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 13>, <&sys_clk 13>, <&sys_clk 13>; + resets = <&usb1_rst 15>; + phys = <&usb1_hsphy0>, <&usb1_hsphy1>, + <&usb1_ssphy0>; + dr_mode = "host"; + }; + + usb-glue@65d00000 { + compatible = "socionext,uniphier-pxs3-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65d00000 0x400>; + + usb1_rst: reset@0 { + compatible = "socionext,uniphier-pxs3-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 13>; + reset-names = "link"; + resets = <&sys_rst 13>; + }; + + usb1_vbus0: regulator@100 { + compatible = "socionext,uniphier-pxs3-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "link"; + clocks = <&sys_clk 13>; + reset-names = "link"; + resets = <&sys_rst 13>; + }; + + usb1_vbus1: regulator@110 { + compatible = "socionext,uniphier-pxs3-usb3-regulator"; + reg = <0x110 0x10>; + clock-names = "link"; + clocks = <&sys_clk 13>; + reset-names = "link"; + resets = <&sys_rst 13>; + }; + + usb1_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-pxs3-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy", "phy-ext"; + clocks = <&sys_clk 13>, <&sys_clk 20>, + <&sys_clk 14>; + reset-names = "link", "phy"; + resets = <&sys_rst 13>, <&sys_rst 20>; + vbus-supply = <&usb1_vbus0>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>, + <&usb_hs_i2>; + }; + + usb1_hsphy1: hs-phy@210 { + compatible = "socionext,uniphier-pxs3-usb3-hsphy"; + reg = <0x210 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy", "phy-ext"; + clocks = <&sys_clk 13>, <&sys_clk 20>, + <&sys_clk 14>; + reset-names = "link", "phy"; + resets = <&sys_rst 13>, <&sys_rst 20>; + vbus-supply = <&usb1_vbus1>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>, + <&usb_hs_i2>; + }; + + usb1_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-pxs3-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy", "phy-ext"; + clocks = <&sys_clk 13>, <&sys_clk 21>, + <&sys_clk 14>; + reset-names = "link", "phy"; + resets = <&sys_rst 13>, <&sys_rst 21>; + vbus-supply = <&usb1_vbus0>; + }; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; @@ -455,7 +735,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/arch/arm64/boot/dts/synaptics/as370.dtsi b/arch/arm64/boot/dts/synaptics/as370.dtsi new file mode 100644 index 000000000000..7331acf3874e --- /dev/null +++ b/arch/arm64/boot/dts/synaptics/as370.dtsi @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2018 Synaptics Incorporated + * + * Author: Jisheng Zhang <jszhang@kernel.org> + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "syna,as370"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_SLEEP_0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_SLEEP_0>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_SLEEP_0>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_SLEEP_0>; + }; + + l2: cache { + compatible = "cache"; + }; + + idle-states { + entry-method = "psci"; + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <75>; + exit-latency-us = <155>; + min-residency-us = <1000>; + }; + }; + }; + + osc: osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + soc@f7000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xf7000000 0x1000000>; + + gic: interrupt-controller@901000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x901000 0x1000>, + <0x902000 0x2000>, + <0x904000 0x2000>, + <0x906000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + apb@e80000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xe80000 0x10000>; + + uart0: serial@c00 { + compatible = "snps,dw-apb-uart"; + reg = <0xc00 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc>; + reg-shift = <2>; + status = "disabled"; + }; + + gpio0: gpio@1800 { + compatible = "snps,dw-apb-gpio"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porta: gpio-port@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpio1: gpio@2000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x2000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portb: gpio-port@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 2409344df4fa..adcd6341e40c 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -8,13 +8,13 @@ &cbass_main { gic500: interrupt-controller@1800000 { compatible = "arm,gic-v3"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; #interrupt-cells = <3>; interrupt-controller; - reg = <0x01800000 0x10000>, /* GICD */ - <0x01880000 0x90000>; /* GICR */ + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ + <0x00 0x01880000 0x00 0x90000>; /* GICR */ /* * vcpumntirq: * virtual CPU interface maintenance interrupt @@ -23,9 +23,50 @@ gic_its: gic-its@18200000 { compatible = "arm,gic-v3-its"; - reg = <0x01820000 0x10000>; + reg = <0x00 0x01820000 0x00 0x10000>; msi-controller; #msi-cells = <1>; }; }; + + secure_proxy_main: mailbox@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x32c00000 0x00 0x100000>, + <0x00 0x32400000 0x00 0x100000>, + <0x00 0x32800000 0x00 0x100000>; + interrupt-names = "rx_011"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + }; + + main_uart0: serial@2800000 { + compatible = "ti,am654-uart"; + reg = <0x00 0x02800000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + }; + + main_uart1: serial@2810000 { + compatible = "ti,am654-uart"; + reg = <0x00 0x02810000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + }; + + main_uart2: serial@2820000 { + compatible = "ti,am654-uart"; + reg = <0x00 0x02820000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi new file mode 100644 index 000000000000..8c611d16df44 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM6 SoC Family MCU Domain peripherals + * + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +&cbass_mcu { + mcu_uart0: serial@40a00000 { + compatible = "ti,am654-uart"; + reg = <0x00 0x40a00000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <96000000>; + current-speed = <115200>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi new file mode 100644 index 000000000000..affc3c309353 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals + * + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +&cbass_wakeup { + dmsc: dmsc { + compatible = "ti,k2g-sci"; + ti,host-id = <12>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mbox-names = "rx", "tx"; + + mboxes= <&secure_proxy_main 11>, + <&secure_proxy_main 13>; + + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <1>; + }; + + k3_clks: clocks { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; + + k3_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; + }; + + wkup_uart0: serial@42300000 { + compatible = "ti,am654-uart"; + reg = <0x00 0x42300000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi index cede1fa0983c..3d4bf369d030 100644 --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -16,6 +16,14 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + serial3 = &main_uart1; + serial4 = &main_uart2; + }; + chosen { }; firmware { @@ -46,38 +54,38 @@ cbass_main: interconnect@100000 { compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00100000 0x00 0x00100000 0x00020000>, /* ctrl mmr */ - <0x00600000 0x00 0x00600000 0x00001100>, /* GPIO */ - <0x00900000 0x00 0x00900000 0x00012000>, /* serdes */ - <0x01000000 0x00 0x01000000 0x0af02400>, /* Most peripherals */ - <0x30800000 0x00 0x30800000 0x0bc00000>, /* MAIN NAVSS */ + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ + <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */ + <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ + <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ + <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */ /* MCUSS Range */ - <0x28380000 0x00 0x28380000 0x03880000>, - <0x40200000 0x00 0x40200000 0x00900100>, - <0x42040000 0x00 0x42040000 0x03ac2400>, - <0x45100000 0x00 0x45100000 0x00c24000>, - <0x46000000 0x00 0x46000000 0x00200000>, - <0x47000000 0x00 0x47000000 0x00068400>; + <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, + <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; cbass_mcu: interconnect@28380000 { compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x28380000 0x28380000 0x03880000>, /* MCU NAVSS*/ - <0x40200000 0x40200000 0x00900100>, /* First peripheral window */ - <0x42040000 0x42040000 0x03ac2400>, /* WKUP */ - <0x45100000 0x45100000 0x00c24000>, /* MMRs, remaining NAVSS */ - <0x46000000 0x46000000 0x00200000>, /* CPSW */ - <0x47000000 0x47000000 0x00068400>; /* OSPI space 1 */ + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ + <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */ + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */ + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; /* OSPI space 1 */ cbass_wakeup: interconnect@42040000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; /* WKUP Basic peripherals */ - ranges = <0x42040000 0x42040000 0x03ac2400>; + ranges = <0x42040000 0x00 0x42040000 0x03ac2400>; }; }; }; @@ -85,3 +93,5 @@ /* Now include the peripherals for each bus segments */ #include "k3-am65-main.dtsi" +#include "k3-am65-mcu.dtsi" +#include "k3-am65-wakeup.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index af6956fdc13f..e146ac2ad781 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -34,3 +34,8 @@ }; }; }; + +&wkup_uart0 { + /* Wakeup UART is used by System firmware */ + status = "disabled"; +}; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index f67e8d5e93ad..c9a57d11330b 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -38,6 +38,7 @@ CONFIG_ARCH_BCM_IPROC=y CONFIG_ARCH_BERLIN=y CONFIG_ARCH_BRCMSTB=y CONFIG_ARCH_EXYNOS=y +CONFIG_ARCH_K3=y CONFIG_ARCH_LAYERSCAPE=y CONFIG_ARCH_LG1K=y CONFIG_ARCH_HISI=y @@ -49,6 +50,8 @@ CONFIG_ARCH_ROCKCHIP=y CONFIG_ARCH_SEATTLE=y CONFIG_ARCH_SYNQUACER=y CONFIG_ARCH_RENESAS=y +CONFIG_ARCH_R8A774A1=y +CONFIG_ARCH_R8A774C0=y CONFIG_ARCH_R8A7795=y CONFIG_ARCH_R8A7796=y CONFIG_ARCH_R8A77965=y @@ -67,6 +70,7 @@ CONFIG_ARCH_XGENE=y CONFIG_ARCH_ZX=y CONFIG_ARCH_ZYNQMP=y CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y CONFIG_PCI_IOV=y CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_ACPI=y @@ -114,6 +118,7 @@ CONFIG_ARM_ARMADA_37XX_CPUFREQ=y CONFIG_ARM_BIG_LITTLE_CPUFREQ=y CONFIG_ARM_SCPI_CPUFREQ=y CONFIG_ARM_TEGRA186_CPUFREQ=y +CONFIG_TI_SCI_PROTOCOL=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -149,6 +154,9 @@ CONFIG_BRIDGE_VLAN_FILTERING=y CONFIG_VLAN_8021Q=m CONFIG_VLAN_8021Q_GVRP=y CONFIG_VLAN_8021Q_MVRP=y +CONFIG_QRTR=m +CONFIG_QRTR_SMD=m +CONFIG_QRTR_TUN=m CONFIG_BPF_JIT=y CONFIG_BT=m CONFIG_BT_HIDP=m @@ -221,6 +229,9 @@ CONFIG_THUNDER_NIC_PF=y CONFIG_HIX5HD2_GMAC=y CONFIG_HNS_DSAF=y CONFIG_HNS_ENET=y +CONFIG_HNS3=y +CONFIG_HNS3_HCLGE=y +CONFIG_HNS3_ENET=y CONFIG_E1000E=y CONFIG_IGB=y CONFIG_IGBVF=y @@ -278,6 +289,7 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_BCM2835AUX=y CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_8250_OMAP=y CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_8250_UNIPHIER=y CONFIG_SERIAL_OF_PLATFORM=y @@ -296,6 +308,9 @@ CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y CONFIG_SERIAL_MVEBU_UART=y CONFIG_SERIAL_DEV_BUS=y CONFIG_VIRTIO_CONSOLE=y +CONFIG_IPMI_HANDLER=m +CONFIG_IPMI_DEVICE_INTERFACE=m +CONFIG_IPMI_SI=m CONFIG_TCG_TPM=y CONFIG_TCG_TIS_I2C_INFINEON=y CONFIG_I2C_CHARDEV=y @@ -433,6 +448,7 @@ CONFIG_DRM_EXYNOS_DSI=y CONFIG_DRM_EXYNOS_HDMI=y CONFIG_DRM_EXYNOS_MIC=y CONFIG_DRM_ROCKCHIP=m +CONFIG_DRM_SUN4I=m CONFIG_ROCKCHIP_ANALOGIX_DP=y CONFIG_ROCKCHIP_CDN_DP=y CONFIG_ROCKCHIP_DW_HDMI=y @@ -519,6 +535,7 @@ CONFIG_MMC_MESON_GX=y CONFIG_MMC_SDHCI_MSM=y CONFIG_MMC_SPI=y CONFIG_MMC_SDHI=y +CONFIG_MMC_UNIPHIER=y CONFIG_MMC_DW=y CONFIG_MMC_DW_EXYNOS=y CONFIG_MMC_DW_HI3798CV200=y @@ -576,6 +593,7 @@ CONFIG_COMMON_CLK_CS2000_CP=y CONFIG_COMMON_CLK_S2MPS11=y CONFIG_CLK_QORIQ=y CONFIG_COMMON_CLK_PWM=y +CONFIG_TI_SCI_CLK=y CONFIG_COMMON_CLK_QCOM=y CONFIG_QCOM_CLK_SMD_RPM=y CONFIG_IPQ_GCC_8074=y @@ -587,6 +605,7 @@ CONFIG_HWSPINLOCK_QCOM=y CONFIG_ARM_MHU=y CONFIG_PLATFORM_MHU=y CONFIG_BCM2835_MBOX=y +CONFIG_TI_MESSAGE_MANAGER=y CONFIG_QCOM_APCS_IPC=y CONFIG_ROCKCHIP_IOMMU=y CONFIG_TEGRA_IOMMU_SMMU=y @@ -605,6 +624,9 @@ CONFIG_ARCH_TEGRA_132_SOC=y CONFIG_ARCH_TEGRA_210_SOC=y CONFIG_ARCH_TEGRA_186_SOC=y CONFIG_ARCH_TEGRA_194_SOC=y +CONFIG_ARCH_K3_AM6_SOC=y +CONFIG_SOC_TI=y +CONFIG_TI_SCI_PM_DOMAINS=y CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y CONFIG_EXTCON_USB_GPIO=y CONFIG_EXTCON_USBC_CROS_EC=y @@ -624,6 +646,7 @@ CONFIG_PWM_RCAR=m CONFIG_PWM_ROCKCHIP=y CONFIG_PWM_SAMSUNG=y CONFIG_PWM_TEGRA=m +CONFIG_RESET_TI_SCI=y CONFIG_PHY_XGENE=y CONFIG_PHY_SUN4I_USB=y CONFIG_PHY_HI6220_USB=y @@ -635,10 +658,13 @@ CONFIG_PHY_QCOM_USB_HS=y CONFIG_PHY_RCAR_GEN3_USB2=y CONFIG_PHY_RCAR_GEN3_USB3=m CONFIG_PHY_ROCKCHIP_EMMC=y +CONFIG_PHY_ROCKCHIP_INNO_HDMI=m CONFIG_PHY_ROCKCHIP_INNO_USB2=y CONFIG_PHY_ROCKCHIP_PCIE=m CONFIG_PHY_ROCKCHIP_TYPEC=y CONFIG_PHY_TEGRA_XUSB=y +CONFIG_PHY_UNIPHIER_USB3=y +CONFIG_PHY_UNIPHIER_USB2=y CONFIG_HISI_PMU=y CONFIG_QCOM_L2_PMU=y CONFIG_QCOM_L3_PMU=y @@ -695,6 +721,7 @@ CONFIG_MEMTEST=y CONFIG_SECURITY=y CONFIG_CRYPTO_ECHAINIV=y CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM=y CONFIG_ARM64_CRYPTO=y CONFIG_CRYPTO_SHA1_ARM64_CE=y CONFIG_CRYPTO_SHA2_ARM64_CE=y @@ -703,7 +730,6 @@ CONFIG_CRYPTO_SHA3_ARM64=m CONFIG_CRYPTO_SM3_ARM64_CE=m CONFIG_CRYPTO_GHASH_ARM64_CE=y CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m -CONFIG_CRYPTO_CRC32_ARM64_CE=m CONFIG_CRYPTO_AES_ARM64_CE_CCM=y CONFIG_CRYPTO_AES_ARM64_CE_BLK=y CONFIG_CRYPTO_CHACHA20_NEON=m diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig index e3fdb0fd6f70..a5606823ed4d 100644 --- a/arch/arm64/crypto/Kconfig +++ b/arch/arm64/crypto/Kconfig @@ -66,11 +66,6 @@ config CRYPTO_CRCT10DIF_ARM64_CE depends on KERNEL_MODE_NEON && CRC_T10DIF select CRYPTO_HASH -config CRYPTO_CRC32_ARM64_CE - tristate "CRC32 and CRC32C digest algorithms using ARMv8 extensions" - depends on CRC32 - select CRYPTO_HASH - config CRYPTO_AES_ARM64 tristate "AES core cipher using scalar instructions" select CRYPTO_AES @@ -119,10 +114,4 @@ config CRYPTO_AES_ARM64_BS select CRYPTO_AES_ARM64 select CRYPTO_SIMD -config CRYPTO_SPECK_NEON - tristate "NEON accelerated Speck cipher algorithms" - depends on KERNEL_MODE_NEON - select CRYPTO_BLKCIPHER - select CRYPTO_SPECK - endif diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile index bcafd016618e..f476fede09ba 100644 --- a/arch/arm64/crypto/Makefile +++ b/arch/arm64/crypto/Makefile @@ -32,9 +32,6 @@ ghash-ce-y := ghash-ce-glue.o ghash-ce-core.o obj-$(CONFIG_CRYPTO_CRCT10DIF_ARM64_CE) += crct10dif-ce.o crct10dif-ce-y := crct10dif-ce-core.o crct10dif-ce-glue.o -obj-$(CONFIG_CRYPTO_CRC32_ARM64_CE) += crc32-ce.o -crc32-ce-y:= crc32-ce-core.o crc32-ce-glue.o - obj-$(CONFIG_CRYPTO_AES_ARM64_CE) += aes-ce-cipher.o aes-ce-cipher-y := aes-ce-core.o aes-ce-glue.o @@ -56,9 +53,6 @@ sha512-arm64-y := sha512-glue.o sha512-core.o obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha20-neon.o chacha20-neon-y := chacha20-neon-core.o chacha20-neon-glue.o -obj-$(CONFIG_CRYPTO_SPECK_NEON) += speck-neon.o -speck-neon-y := speck-neon-core.o speck-neon-glue.o - obj-$(CONFIG_CRYPTO_AES_ARM64) += aes-arm64.o aes-arm64-y := aes-cipher-core.o aes-cipher-glue.o diff --git a/arch/arm64/crypto/aes-ce.S b/arch/arm64/crypto/aes-ce.S index 623e74ed1c67..143070510809 100644 --- a/arch/arm64/crypto/aes-ce.S +++ b/arch/arm64/crypto/aes-ce.S @@ -17,6 +17,11 @@ .arch armv8-a+crypto + xtsmask .req v16 + + .macro xts_reload_mask, tmp + .endm + /* preload all round keys */ .macro load_round_keys, rounds, rk cmp \rounds, #12 diff --git a/arch/arm64/crypto/aes-glue.c b/arch/arm64/crypto/aes-glue.c index adcb83eb683c..1e676625ef33 100644 --- a/arch/arm64/crypto/aes-glue.c +++ b/arch/arm64/crypto/aes-glue.c @@ -15,6 +15,7 @@ #include <crypto/internal/hash.h> #include <crypto/internal/simd.h> #include <crypto/internal/skcipher.h> +#include <crypto/scatterwalk.h> #include <linux/module.h> #include <linux/cpufeature.h> #include <crypto/xts.h> @@ -31,6 +32,8 @@ #define aes_ecb_decrypt ce_aes_ecb_decrypt #define aes_cbc_encrypt ce_aes_cbc_encrypt #define aes_cbc_decrypt ce_aes_cbc_decrypt +#define aes_cbc_cts_encrypt ce_aes_cbc_cts_encrypt +#define aes_cbc_cts_decrypt ce_aes_cbc_cts_decrypt #define aes_ctr_encrypt ce_aes_ctr_encrypt #define aes_xts_encrypt ce_aes_xts_encrypt #define aes_xts_decrypt ce_aes_xts_decrypt @@ -45,6 +48,8 @@ MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 Crypto Extensions"); #define aes_ecb_decrypt neon_aes_ecb_decrypt #define aes_cbc_encrypt neon_aes_cbc_encrypt #define aes_cbc_decrypt neon_aes_cbc_decrypt +#define aes_cbc_cts_encrypt neon_aes_cbc_cts_encrypt +#define aes_cbc_cts_decrypt neon_aes_cbc_cts_decrypt #define aes_ctr_encrypt neon_aes_ctr_encrypt #define aes_xts_encrypt neon_aes_xts_encrypt #define aes_xts_decrypt neon_aes_xts_decrypt @@ -63,30 +68,41 @@ MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); MODULE_LICENSE("GPL v2"); /* defined in aes-modes.S */ -asmlinkage void aes_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[], +asmlinkage void aes_ecb_encrypt(u8 out[], u8 const in[], u32 const rk[], int rounds, int blocks); -asmlinkage void aes_ecb_decrypt(u8 out[], u8 const in[], u8 const rk[], +asmlinkage void aes_ecb_decrypt(u8 out[], u8 const in[], u32 const rk[], int rounds, int blocks); -asmlinkage void aes_cbc_encrypt(u8 out[], u8 const in[], u8 const rk[], +asmlinkage void aes_cbc_encrypt(u8 out[], u8 const in[], u32 const rk[], int rounds, int blocks, u8 iv[]); -asmlinkage void aes_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[], +asmlinkage void aes_cbc_decrypt(u8 out[], u8 const in[], u32 const rk[], int rounds, int blocks, u8 iv[]); -asmlinkage void aes_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[], +asmlinkage void aes_cbc_cts_encrypt(u8 out[], u8 const in[], u32 const rk[], + int rounds, int bytes, u8 const iv[]); +asmlinkage void aes_cbc_cts_decrypt(u8 out[], u8 const in[], u32 const rk[], + int rounds, int bytes, u8 const iv[]); + +asmlinkage void aes_ctr_encrypt(u8 out[], u8 const in[], u32 const rk[], int rounds, int blocks, u8 ctr[]); -asmlinkage void aes_xts_encrypt(u8 out[], u8 const in[], u8 const rk1[], - int rounds, int blocks, u8 const rk2[], u8 iv[], +asmlinkage void aes_xts_encrypt(u8 out[], u8 const in[], u32 const rk1[], + int rounds, int blocks, u32 const rk2[], u8 iv[], int first); -asmlinkage void aes_xts_decrypt(u8 out[], u8 const in[], u8 const rk1[], - int rounds, int blocks, u8 const rk2[], u8 iv[], +asmlinkage void aes_xts_decrypt(u8 out[], u8 const in[], u32 const rk1[], + int rounds, int blocks, u32 const rk2[], u8 iv[], int first); asmlinkage void aes_mac_update(u8 const in[], u32 const rk[], int rounds, int blocks, u8 dg[], int enc_before, int enc_after); +struct cts_cbc_req_ctx { + struct scatterlist sg_src[2]; + struct scatterlist sg_dst[2]; + struct skcipher_request subreq; +}; + struct crypto_aes_xts_ctx { struct crypto_aes_ctx key1; struct crypto_aes_ctx __aligned(8) key2; @@ -142,7 +158,7 @@ static int ecb_encrypt(struct skcipher_request *req) while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { kernel_neon_begin(); aes_ecb_encrypt(walk.dst.virt.addr, walk.src.virt.addr, - (u8 *)ctx->key_enc, rounds, blocks); + ctx->key_enc, rounds, blocks); kernel_neon_end(); err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); } @@ -162,7 +178,7 @@ static int ecb_decrypt(struct skcipher_request *req) while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { kernel_neon_begin(); aes_ecb_decrypt(walk.dst.virt.addr, walk.src.virt.addr, - (u8 *)ctx->key_dec, rounds, blocks); + ctx->key_dec, rounds, blocks); kernel_neon_end(); err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); } @@ -182,7 +198,7 @@ static int cbc_encrypt(struct skcipher_request *req) while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { kernel_neon_begin(); aes_cbc_encrypt(walk.dst.virt.addr, walk.src.virt.addr, - (u8 *)ctx->key_enc, rounds, blocks, walk.iv); + ctx->key_enc, rounds, blocks, walk.iv); kernel_neon_end(); err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); } @@ -202,13 +218,149 @@ static int cbc_decrypt(struct skcipher_request *req) while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { kernel_neon_begin(); aes_cbc_decrypt(walk.dst.virt.addr, walk.src.virt.addr, - (u8 *)ctx->key_dec, rounds, blocks, walk.iv); + ctx->key_dec, rounds, blocks, walk.iv); kernel_neon_end(); err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); } return err; } +static int cts_cbc_init_tfm(struct crypto_skcipher *tfm) +{ + crypto_skcipher_set_reqsize(tfm, sizeof(struct cts_cbc_req_ctx)); + return 0; +} + +static int cts_cbc_encrypt(struct skcipher_request *req) +{ + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm); + struct cts_cbc_req_ctx *rctx = skcipher_request_ctx(req); + int err, rounds = 6 + ctx->key_length / 4; + int cbc_blocks = DIV_ROUND_UP(req->cryptlen, AES_BLOCK_SIZE) - 2; + struct scatterlist *src = req->src, *dst = req->dst; + struct skcipher_walk walk; + + skcipher_request_set_tfm(&rctx->subreq, tfm); + + if (req->cryptlen <= AES_BLOCK_SIZE) { + if (req->cryptlen < AES_BLOCK_SIZE) + return -EINVAL; + cbc_blocks = 1; + } + + if (cbc_blocks > 0) { + unsigned int blocks; + + skcipher_request_set_crypt(&rctx->subreq, req->src, req->dst, + cbc_blocks * AES_BLOCK_SIZE, + req->iv); + + err = skcipher_walk_virt(&walk, &rctx->subreq, false); + + while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { + kernel_neon_begin(); + aes_cbc_encrypt(walk.dst.virt.addr, walk.src.virt.addr, + ctx->key_enc, rounds, blocks, walk.iv); + kernel_neon_end(); + err = skcipher_walk_done(&walk, + walk.nbytes % AES_BLOCK_SIZE); + } + if (err) + return err; + + if (req->cryptlen == AES_BLOCK_SIZE) + return 0; + + dst = src = scatterwalk_ffwd(rctx->sg_src, req->src, + rctx->subreq.cryptlen); + if (req->dst != req->src) + dst = scatterwalk_ffwd(rctx->sg_dst, req->dst, + rctx->subreq.cryptlen); + } + + /* handle ciphertext stealing */ + skcipher_request_set_crypt(&rctx->subreq, src, dst, + req->cryptlen - cbc_blocks * AES_BLOCK_SIZE, + req->iv); + + err = skcipher_walk_virt(&walk, &rctx->subreq, false); + if (err) + return err; + + kernel_neon_begin(); + aes_cbc_cts_encrypt(walk.dst.virt.addr, walk.src.virt.addr, + ctx->key_enc, rounds, walk.nbytes, walk.iv); + kernel_neon_end(); + + return skcipher_walk_done(&walk, 0); +} + +static int cts_cbc_decrypt(struct skcipher_request *req) +{ + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm); + struct cts_cbc_req_ctx *rctx = skcipher_request_ctx(req); + int err, rounds = 6 + ctx->key_length / 4; + int cbc_blocks = DIV_ROUND_UP(req->cryptlen, AES_BLOCK_SIZE) - 2; + struct scatterlist *src = req->src, *dst = req->dst; + struct skcipher_walk walk; + + skcipher_request_set_tfm(&rctx->subreq, tfm); + + if (req->cryptlen <= AES_BLOCK_SIZE) { + if (req->cryptlen < AES_BLOCK_SIZE) + return -EINVAL; + cbc_blocks = 1; + } + + if (cbc_blocks > 0) { + unsigned int blocks; + + skcipher_request_set_crypt(&rctx->subreq, req->src, req->dst, + cbc_blocks * AES_BLOCK_SIZE, + req->iv); + + err = skcipher_walk_virt(&walk, &rctx->subreq, false); + + while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { + kernel_neon_begin(); + aes_cbc_decrypt(walk.dst.virt.addr, walk.src.virt.addr, + ctx->key_dec, rounds, blocks, walk.iv); + kernel_neon_end(); + err = skcipher_walk_done(&walk, + walk.nbytes % AES_BLOCK_SIZE); + } + if (err) + return err; + + if (req->cryptlen == AES_BLOCK_SIZE) + return 0; + + dst = src = scatterwalk_ffwd(rctx->sg_src, req->src, + rctx->subreq.cryptlen); + if (req->dst != req->src) + dst = scatterwalk_ffwd(rctx->sg_dst, req->dst, + rctx->subreq.cryptlen); + } + + /* handle ciphertext stealing */ + skcipher_request_set_crypt(&rctx->subreq, src, dst, + req->cryptlen - cbc_blocks * AES_BLOCK_SIZE, + req->iv); + + err = skcipher_walk_virt(&walk, &rctx->subreq, false); + if (err) + return err; + + kernel_neon_begin(); + aes_cbc_cts_decrypt(walk.dst.virt.addr, walk.src.virt.addr, + ctx->key_dec, rounds, walk.nbytes, walk.iv); + kernel_neon_end(); + + return skcipher_walk_done(&walk, 0); +} + static int ctr_encrypt(struct skcipher_request *req) { struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); @@ -222,7 +374,7 @@ static int ctr_encrypt(struct skcipher_request *req) while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { kernel_neon_begin(); aes_ctr_encrypt(walk.dst.virt.addr, walk.src.virt.addr, - (u8 *)ctx->key_enc, rounds, blocks, walk.iv); + ctx->key_enc, rounds, blocks, walk.iv); kernel_neon_end(); err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); } @@ -238,7 +390,7 @@ static int ctr_encrypt(struct skcipher_request *req) blocks = -1; kernel_neon_begin(); - aes_ctr_encrypt(tail, NULL, (u8 *)ctx->key_enc, rounds, + aes_ctr_encrypt(tail, NULL, ctx->key_enc, rounds, blocks, walk.iv); kernel_neon_end(); crypto_xor_cpy(tdst, tsrc, tail, nbytes); @@ -272,8 +424,8 @@ static int xts_encrypt(struct skcipher_request *req) for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) { kernel_neon_begin(); aes_xts_encrypt(walk.dst.virt.addr, walk.src.virt.addr, - (u8 *)ctx->key1.key_enc, rounds, blocks, - (u8 *)ctx->key2.key_enc, walk.iv, first); + ctx->key1.key_enc, rounds, blocks, + ctx->key2.key_enc, walk.iv, first); kernel_neon_end(); err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); } @@ -294,8 +446,8 @@ static int xts_decrypt(struct skcipher_request *req) for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) { kernel_neon_begin(); aes_xts_decrypt(walk.dst.virt.addr, walk.src.virt.addr, - (u8 *)ctx->key1.key_dec, rounds, blocks, - (u8 *)ctx->key2.key_enc, walk.iv, first); + ctx->key1.key_dec, rounds, blocks, + ctx->key2.key_enc, walk.iv, first); kernel_neon_end(); err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); } @@ -336,6 +488,24 @@ static struct skcipher_alg aes_algs[] = { { .decrypt = cbc_decrypt, }, { .base = { + .cra_name = "__cts(cbc(aes))", + .cra_driver_name = "__cts-cbc-aes-" MODE, + .cra_priority = PRIO, + .cra_flags = CRYPTO_ALG_INTERNAL, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_ctx), + .cra_module = THIS_MODULE, + }, + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .walksize = 2 * AES_BLOCK_SIZE, + .setkey = skcipher_aes_setkey, + .encrypt = cts_cbc_encrypt, + .decrypt = cts_cbc_decrypt, + .init = cts_cbc_init_tfm, +}, { + .base = { .cra_name = "__ctr(aes)", .cra_driver_name = "__ctr-aes-" MODE, .cra_priority = PRIO, @@ -412,7 +582,6 @@ static int cmac_setkey(struct crypto_shash *tfm, const u8 *in_key, { struct mac_tfm_ctx *ctx = crypto_shash_ctx(tfm); be128 *consts = (be128 *)ctx->consts; - u8 *rk = (u8 *)ctx->key.key_enc; int rounds = 6 + key_len / 4; int err; @@ -422,7 +591,8 @@ static int cmac_setkey(struct crypto_shash *tfm, const u8 *in_key, /* encrypt the zero vector */ kernel_neon_begin(); - aes_ecb_encrypt(ctx->consts, (u8[AES_BLOCK_SIZE]){}, rk, rounds, 1); + aes_ecb_encrypt(ctx->consts, (u8[AES_BLOCK_SIZE]){}, ctx->key.key_enc, + rounds, 1); kernel_neon_end(); cmac_gf128_mul_by_x(consts, consts); @@ -441,7 +611,6 @@ static int xcbc_setkey(struct crypto_shash *tfm, const u8 *in_key, }; struct mac_tfm_ctx *ctx = crypto_shash_ctx(tfm); - u8 *rk = (u8 *)ctx->key.key_enc; int rounds = 6 + key_len / 4; u8 key[AES_BLOCK_SIZE]; int err; @@ -451,8 +620,8 @@ static int xcbc_setkey(struct crypto_shash *tfm, const u8 *in_key, return err; kernel_neon_begin(); - aes_ecb_encrypt(key, ks[0], rk, rounds, 1); - aes_ecb_encrypt(ctx->consts, ks[1], rk, rounds, 2); + aes_ecb_encrypt(key, ks[0], ctx->key.key_enc, rounds, 1); + aes_ecb_encrypt(ctx->consts, ks[1], ctx->key.key_enc, rounds, 2); kernel_neon_end(); return cbcmac_setkey(tfm, key, sizeof(key)); diff --git a/arch/arm64/crypto/aes-modes.S b/arch/arm64/crypto/aes-modes.S index 483a7130cf0e..67700045a0e0 100644 --- a/arch/arm64/crypto/aes-modes.S +++ b/arch/arm64/crypto/aes-modes.S @@ -14,12 +14,12 @@ .align 4 aes_encrypt_block4x: - encrypt_block4x v0, v1, v2, v3, w22, x21, x8, w7 + encrypt_block4x v0, v1, v2, v3, w3, x2, x8, w7 ret ENDPROC(aes_encrypt_block4x) aes_decrypt_block4x: - decrypt_block4x v0, v1, v2, v3, w22, x21, x8, w7 + decrypt_block4x v0, v1, v2, v3, w3, x2, x8, w7 ret ENDPROC(aes_decrypt_block4x) @@ -31,71 +31,57 @@ ENDPROC(aes_decrypt_block4x) */ AES_ENTRY(aes_ecb_encrypt) - frame_push 5 + stp x29, x30, [sp, #-16]! + mov x29, sp - mov x19, x0 - mov x20, x1 - mov x21, x2 - mov x22, x3 - mov x23, x4 - -.Lecbencrestart: - enc_prepare w22, x21, x5 + enc_prepare w3, x2, x5 .LecbencloopNx: - subs w23, w23, #4 + subs w4, w4, #4 bmi .Lecbenc1x - ld1 {v0.16b-v3.16b}, [x20], #64 /* get 4 pt blocks */ + ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 pt blocks */ bl aes_encrypt_block4x - st1 {v0.16b-v3.16b}, [x19], #64 - cond_yield_neon .Lecbencrestart + st1 {v0.16b-v3.16b}, [x0], #64 b .LecbencloopNx .Lecbenc1x: - adds w23, w23, #4 + adds w4, w4, #4 beq .Lecbencout .Lecbencloop: - ld1 {v0.16b}, [x20], #16 /* get next pt block */ - encrypt_block v0, w22, x21, x5, w6 - st1 {v0.16b}, [x19], #16 - subs w23, w23, #1 + ld1 {v0.16b}, [x1], #16 /* get next pt block */ + encrypt_block v0, w3, x2, x5, w6 + st1 {v0.16b}, [x0], #16 + subs w4, w4, #1 bne .Lecbencloop .Lecbencout: - frame_pop + ldp x29, x30, [sp], #16 ret AES_ENDPROC(aes_ecb_encrypt) AES_ENTRY(aes_ecb_decrypt) - frame_push 5 + stp x29, x30, [sp, #-16]! + mov x29, sp - mov x19, x0 - mov x20, x1 - mov x21, x2 - mov x22, x3 - mov x23, x4 - -.Lecbdecrestart: - dec_prepare w22, x21, x5 + dec_prepare w3, x2, x5 .LecbdecloopNx: - subs w23, w23, #4 + subs w4, w4, #4 bmi .Lecbdec1x - ld1 {v0.16b-v3.16b}, [x20], #64 /* get 4 ct blocks */ + ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 ct blocks */ bl aes_decrypt_block4x - st1 {v0.16b-v3.16b}, [x19], #64 - cond_yield_neon .Lecbdecrestart + st1 {v0.16b-v3.16b}, [x0], #64 b .LecbdecloopNx .Lecbdec1x: - adds w23, w23, #4 + adds w4, w4, #4 beq .Lecbdecout .Lecbdecloop: - ld1 {v0.16b}, [x20], #16 /* get next ct block */ - decrypt_block v0, w22, x21, x5, w6 - st1 {v0.16b}, [x19], #16 - subs w23, w23, #1 + ld1 {v0.16b}, [x1], #16 /* get next ct block */ + decrypt_block v0, w3, x2, x5, w6 + st1 {v0.16b}, [x0], #16 + subs w4, w4, #1 bne .Lecbdecloop .Lecbdecout: - frame_pop + ldp x29, x30, [sp], #16 ret AES_ENDPROC(aes_ecb_decrypt) @@ -108,162 +94,211 @@ AES_ENDPROC(aes_ecb_decrypt) */ AES_ENTRY(aes_cbc_encrypt) - frame_push 6 - - mov x19, x0 - mov x20, x1 - mov x21, x2 - mov x22, x3 - mov x23, x4 - mov x24, x5 - -.Lcbcencrestart: - ld1 {v4.16b}, [x24] /* get iv */ - enc_prepare w22, x21, x6 + ld1 {v4.16b}, [x5] /* get iv */ + enc_prepare w3, x2, x6 .Lcbcencloop4x: - subs w23, w23, #4 + subs w4, w4, #4 bmi .Lcbcenc1x - ld1 {v0.16b-v3.16b}, [x20], #64 /* get 4 pt blocks */ + ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 pt blocks */ eor v0.16b, v0.16b, v4.16b /* ..and xor with iv */ - encrypt_block v0, w22, x21, x6, w7 + encrypt_block v0, w3, x2, x6, w7 eor v1.16b, v1.16b, v0.16b - encrypt_block v1, w22, x21, x6, w7 + encrypt_block v1, w3, x2, x6, w7 eor v2.16b, v2.16b, v1.16b - encrypt_block v2, w22, x21, x6, w7 + encrypt_block v2, w3, x2, x6, w7 eor v3.16b, v3.16b, v2.16b - encrypt_block v3, w22, x21, x6, w7 - st1 {v0.16b-v3.16b}, [x19], #64 + encrypt_block v3, w3, x2, x6, w7 + st1 {v0.16b-v3.16b}, [x0], #64 mov v4.16b, v3.16b - st1 {v4.16b}, [x24] /* return iv */ - cond_yield_neon .Lcbcencrestart b .Lcbcencloop4x .Lcbcenc1x: - adds w23, w23, #4 + adds w4, w4, #4 beq .Lcbcencout .Lcbcencloop: - ld1 {v0.16b}, [x20], #16 /* get next pt block */ + ld1 {v0.16b}, [x1], #16 /* get next pt block */ eor v4.16b, v4.16b, v0.16b /* ..and xor with iv */ - encrypt_block v4, w22, x21, x6, w7 - st1 {v4.16b}, [x19], #16 - subs w23, w23, #1 + encrypt_block v4, w3, x2, x6, w7 + st1 {v4.16b}, [x0], #16 + subs w4, w4, #1 bne .Lcbcencloop .Lcbcencout: - st1 {v4.16b}, [x24] /* return iv */ - frame_pop + st1 {v4.16b}, [x5] /* return iv */ ret AES_ENDPROC(aes_cbc_encrypt) AES_ENTRY(aes_cbc_decrypt) - frame_push 6 - - mov x19, x0 - mov x20, x1 - mov x21, x2 - mov x22, x3 - mov x23, x4 - mov x24, x5 + stp x29, x30, [sp, #-16]! + mov x29, sp -.Lcbcdecrestart: - ld1 {v7.16b}, [x24] /* get iv */ - dec_prepare w22, x21, x6 + ld1 {v7.16b}, [x5] /* get iv */ + dec_prepare w3, x2, x6 .LcbcdecloopNx: - subs w23, w23, #4 + subs w4, w4, #4 bmi .Lcbcdec1x - ld1 {v0.16b-v3.16b}, [x20], #64 /* get 4 ct blocks */ + ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 ct blocks */ mov v4.16b, v0.16b mov v5.16b, v1.16b mov v6.16b, v2.16b bl aes_decrypt_block4x - sub x20, x20, #16 + sub x1, x1, #16 eor v0.16b, v0.16b, v7.16b eor v1.16b, v1.16b, v4.16b - ld1 {v7.16b}, [x20], #16 /* reload 1 ct block */ + ld1 {v7.16b}, [x1], #16 /* reload 1 ct block */ eor v2.16b, v2.16b, v5.16b eor v3.16b, v3.16b, v6.16b - st1 {v0.16b-v3.16b}, [x19], #64 - st1 {v7.16b}, [x24] /* return iv */ - cond_yield_neon .Lcbcdecrestart + st1 {v0.16b-v3.16b}, [x0], #64 b .LcbcdecloopNx .Lcbcdec1x: - adds w23, w23, #4 + adds w4, w4, #4 beq .Lcbcdecout .Lcbcdecloop: - ld1 {v1.16b}, [x20], #16 /* get next ct block */ + ld1 {v1.16b}, [x1], #16 /* get next ct block */ mov v0.16b, v1.16b /* ...and copy to v0 */ - decrypt_block v0, w22, x21, x6, w7 + decrypt_block v0, w3, x2, x6, w7 eor v0.16b, v0.16b, v7.16b /* xor with iv => pt */ mov v7.16b, v1.16b /* ct is next iv */ - st1 {v0.16b}, [x19], #16 - subs w23, w23, #1 + st1 {v0.16b}, [x0], #16 + subs w4, w4, #1 bne .Lcbcdecloop .Lcbcdecout: - st1 {v7.16b}, [x24] /* return iv */ - frame_pop + st1 {v7.16b}, [x5] /* return iv */ + ldp x29, x30, [sp], #16 ret AES_ENDPROC(aes_cbc_decrypt) /* + * aes_cbc_cts_encrypt(u8 out[], u8 const in[], u32 const rk[], + * int rounds, int bytes, u8 const iv[]) + * aes_cbc_cts_decrypt(u8 out[], u8 const in[], u32 const rk[], + * int rounds, int bytes, u8 const iv[]) + */ + +AES_ENTRY(aes_cbc_cts_encrypt) + adr_l x8, .Lcts_permute_table + sub x4, x4, #16 + add x9, x8, #32 + add x8, x8, x4 + sub x9, x9, x4 + ld1 {v3.16b}, [x8] + ld1 {v4.16b}, [x9] + + ld1 {v0.16b}, [x1], x4 /* overlapping loads */ + ld1 {v1.16b}, [x1] + + ld1 {v5.16b}, [x5] /* get iv */ + enc_prepare w3, x2, x6 + + eor v0.16b, v0.16b, v5.16b /* xor with iv */ + tbl v1.16b, {v1.16b}, v4.16b + encrypt_block v0, w3, x2, x6, w7 + + eor v1.16b, v1.16b, v0.16b + tbl v0.16b, {v0.16b}, v3.16b + encrypt_block v1, w3, x2, x6, w7 + + add x4, x0, x4 + st1 {v0.16b}, [x4] /* overlapping stores */ + st1 {v1.16b}, [x0] + ret +AES_ENDPROC(aes_cbc_cts_encrypt) + +AES_ENTRY(aes_cbc_cts_decrypt) + adr_l x8, .Lcts_permute_table + sub x4, x4, #16 + add x9, x8, #32 + add x8, x8, x4 + sub x9, x9, x4 + ld1 {v3.16b}, [x8] + ld1 {v4.16b}, [x9] + + ld1 {v0.16b}, [x1], x4 /* overlapping loads */ + ld1 {v1.16b}, [x1] + + ld1 {v5.16b}, [x5] /* get iv */ + dec_prepare w3, x2, x6 + + tbl v2.16b, {v1.16b}, v4.16b + decrypt_block v0, w3, x2, x6, w7 + eor v2.16b, v2.16b, v0.16b + + tbx v0.16b, {v1.16b}, v4.16b + tbl v2.16b, {v2.16b}, v3.16b + decrypt_block v0, w3, x2, x6, w7 + eor v0.16b, v0.16b, v5.16b /* xor with iv */ + + add x4, x0, x4 + st1 {v2.16b}, [x4] /* overlapping stores */ + st1 {v0.16b}, [x0] + ret +AES_ENDPROC(aes_cbc_cts_decrypt) + + .section ".rodata", "a" + .align 6 +.Lcts_permute_table: + .byte 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff + .byte 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff + .byte 0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7 + .byte 0x8, 0x9, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf + .byte 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff + .byte 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff + .previous + + + /* * aes_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, * int blocks, u8 ctr[]) */ AES_ENTRY(aes_ctr_encrypt) - frame_push 6 + stp x29, x30, [sp, #-16]! + mov x29, sp - mov x19, x0 - mov x20, x1 - mov x21, x2 - mov x22, x3 - mov x23, x4 - mov x24, x5 - -.Lctrrestart: - enc_prepare w22, x21, x6 - ld1 {v4.16b}, [x24] + enc_prepare w3, x2, x6 + ld1 {v4.16b}, [x5] umov x6, v4.d[1] /* keep swabbed ctr in reg */ rev x6, x6 + cmn w6, w4 /* 32 bit overflow? */ + bcs .Lctrloop .LctrloopNx: - subs w23, w23, #4 + subs w4, w4, #4 bmi .Lctr1x - cmn w6, #4 /* 32 bit overflow? */ - bcs .Lctr1x - ldr q8, =0x30000000200000001 /* addends 1,2,3[,0] */ - dup v7.4s, w6 + add w7, w6, #1 mov v0.16b, v4.16b - add v7.4s, v7.4s, v8.4s + add w8, w6, #2 mov v1.16b, v4.16b - rev32 v8.16b, v7.16b + add w9, w6, #3 mov v2.16b, v4.16b + rev w7, w7 mov v3.16b, v4.16b - mov v1.s[3], v8.s[0] - mov v2.s[3], v8.s[1] - mov v3.s[3], v8.s[2] - ld1 {v5.16b-v7.16b}, [x20], #48 /* get 3 input blocks */ + rev w8, w8 + mov v1.s[3], w7 + rev w9, w9 + mov v2.s[3], w8 + mov v3.s[3], w9 + ld1 {v5.16b-v7.16b}, [x1], #48 /* get 3 input blocks */ bl aes_encrypt_block4x eor v0.16b, v5.16b, v0.16b - ld1 {v5.16b}, [x20], #16 /* get 1 input block */ + ld1 {v5.16b}, [x1], #16 /* get 1 input block */ eor v1.16b, v6.16b, v1.16b eor v2.16b, v7.16b, v2.16b eor v3.16b, v5.16b, v3.16b - st1 {v0.16b-v3.16b}, [x19], #64 + st1 {v0.16b-v3.16b}, [x0], #64 add x6, x6, #4 rev x7, x6 ins v4.d[1], x7 - cbz w23, .Lctrout - st1 {v4.16b}, [x24] /* return next CTR value */ - cond_yield_neon .Lctrrestart + cbz w4, .Lctrout b .LctrloopNx .Lctr1x: - adds w23, w23, #4 + adds w4, w4, #4 beq .Lctrout .Lctrloop: mov v0.16b, v4.16b - encrypt_block v0, w22, x21, x8, w7 + encrypt_block v0, w3, x2, x8, w7 adds x6, x6, #1 /* increment BE ctr */ rev x7, x6 @@ -271,22 +306,22 @@ AES_ENTRY(aes_ctr_encrypt) bcs .Lctrcarry /* overflow? */ .Lctrcarrydone: - subs w23, w23, #1 + subs w4, w4, #1 bmi .Lctrtailblock /* blocks <0 means tail block */ - ld1 {v3.16b}, [x20], #16 + ld1 {v3.16b}, [x1], #16 eor v3.16b, v0.16b, v3.16b - st1 {v3.16b}, [x19], #16 + st1 {v3.16b}, [x0], #16 bne .Lctrloop .Lctrout: - st1 {v4.16b}, [x24] /* return next CTR value */ -.Lctrret: - frame_pop + st1 {v4.16b}, [x5] /* return next CTR value */ + ldp x29, x30, [sp], #16 ret .Lctrtailblock: - st1 {v0.16b}, [x19] - b .Lctrret + st1 {v0.16b}, [x0] + ldp x29, x30, [sp], #16 + ret .Lctrcarry: umov x7, v4.d[0] /* load upper word of ctr */ @@ -296,7 +331,6 @@ AES_ENTRY(aes_ctr_encrypt) ins v4.d[0], x7 b .Lctrcarrydone AES_ENDPROC(aes_ctr_encrypt) - .ltorg /* @@ -306,150 +340,132 @@ AES_ENDPROC(aes_ctr_encrypt) * int blocks, u8 const rk2[], u8 iv[], int first) */ - .macro next_tweak, out, in, const, tmp + .macro next_tweak, out, in, tmp sshr \tmp\().2d, \in\().2d, #63 - and \tmp\().16b, \tmp\().16b, \const\().16b + and \tmp\().16b, \tmp\().16b, xtsmask.16b add \out\().2d, \in\().2d, \in\().2d ext \tmp\().16b, \tmp\().16b, \tmp\().16b, #8 eor \out\().16b, \out\().16b, \tmp\().16b .endm -.Lxts_mul_x: -CPU_LE( .quad 1, 0x87 ) -CPU_BE( .quad 0x87, 1 ) + .macro xts_load_mask, tmp + movi xtsmask.2s, #0x1 + movi \tmp\().2s, #0x87 + uzp1 xtsmask.4s, xtsmask.4s, \tmp\().4s + .endm AES_ENTRY(aes_xts_encrypt) - frame_push 6 + stp x29, x30, [sp, #-16]! + mov x29, sp - mov x19, x0 - mov x20, x1 - mov x21, x2 - mov x22, x3 - mov x23, x4 - mov x24, x6 - - ld1 {v4.16b}, [x24] + ld1 {v4.16b}, [x6] + xts_load_mask v8 cbz w7, .Lxtsencnotfirst enc_prepare w3, x5, x8 encrypt_block v4, w3, x5, x8, w7 /* first tweak */ enc_switch_key w3, x2, x8 - ldr q7, .Lxts_mul_x b .LxtsencNx -.Lxtsencrestart: - ld1 {v4.16b}, [x24] .Lxtsencnotfirst: - enc_prepare w22, x21, x8 + enc_prepare w3, x2, x8 .LxtsencloopNx: - ldr q7, .Lxts_mul_x - next_tweak v4, v4, v7, v8 + next_tweak v4, v4, v8 .LxtsencNx: - subs w23, w23, #4 + subs w4, w4, #4 bmi .Lxtsenc1x - ld1 {v0.16b-v3.16b}, [x20], #64 /* get 4 pt blocks */ - next_tweak v5, v4, v7, v8 + ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 pt blocks */ + next_tweak v5, v4, v8 eor v0.16b, v0.16b, v4.16b - next_tweak v6, v5, v7, v8 + next_tweak v6, v5, v8 eor v1.16b, v1.16b, v5.16b eor v2.16b, v2.16b, v6.16b - next_tweak v7, v6, v7, v8 + next_tweak v7, v6, v8 eor v3.16b, v3.16b, v7.16b bl aes_encrypt_block4x eor v3.16b, v3.16b, v7.16b eor v0.16b, v0.16b, v4.16b eor v1.16b, v1.16b, v5.16b eor v2.16b, v2.16b, v6.16b - st1 {v0.16b-v3.16b}, [x19], #64 + st1 {v0.16b-v3.16b}, [x0], #64 mov v4.16b, v7.16b - cbz w23, .Lxtsencout - st1 {v4.16b}, [x24] - cond_yield_neon .Lxtsencrestart + cbz w4, .Lxtsencout + xts_reload_mask v8 b .LxtsencloopNx .Lxtsenc1x: - adds w23, w23, #4 + adds w4, w4, #4 beq .Lxtsencout .Lxtsencloop: - ld1 {v1.16b}, [x20], #16 + ld1 {v1.16b}, [x1], #16 eor v0.16b, v1.16b, v4.16b - encrypt_block v0, w22, x21, x8, w7 + encrypt_block v0, w3, x2, x8, w7 eor v0.16b, v0.16b, v4.16b - st1 {v0.16b}, [x19], #16 - subs w23, w23, #1 + st1 {v0.16b}, [x0], #16 + subs w4, w4, #1 beq .Lxtsencout - next_tweak v4, v4, v7, v8 + next_tweak v4, v4, v8 b .Lxtsencloop .Lxtsencout: - st1 {v4.16b}, [x24] - frame_pop + st1 {v4.16b}, [x6] + ldp x29, x30, [sp], #16 ret AES_ENDPROC(aes_xts_encrypt) AES_ENTRY(aes_xts_decrypt) - frame_push 6 + stp x29, x30, [sp, #-16]! + mov x29, sp - mov x19, x0 - mov x20, x1 - mov x21, x2 - mov x22, x3 - mov x23, x4 - mov x24, x6 - - ld1 {v4.16b}, [x24] + ld1 {v4.16b}, [x6] + xts_load_mask v8 cbz w7, .Lxtsdecnotfirst enc_prepare w3, x5, x8 encrypt_block v4, w3, x5, x8, w7 /* first tweak */ dec_prepare w3, x2, x8 - ldr q7, .Lxts_mul_x b .LxtsdecNx -.Lxtsdecrestart: - ld1 {v4.16b}, [x24] .Lxtsdecnotfirst: - dec_prepare w22, x21, x8 + dec_prepare w3, x2, x8 .LxtsdecloopNx: - ldr q7, .Lxts_mul_x - next_tweak v4, v4, v7, v8 + next_tweak v4, v4, v8 .LxtsdecNx: - subs w23, w23, #4 + subs w4, w4, #4 bmi .Lxtsdec1x - ld1 {v0.16b-v3.16b}, [x20], #64 /* get 4 ct blocks */ - next_tweak v5, v4, v7, v8 + ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 ct blocks */ + next_tweak v5, v4, v8 eor v0.16b, v0.16b, v4.16b - next_tweak v6, v5, v7, v8 + next_tweak v6, v5, v8 eor v1.16b, v1.16b, v5.16b eor v2.16b, v2.16b, v6.16b - next_tweak v7, v6, v7, v8 + next_tweak v7, v6, v8 eor v3.16b, v3.16b, v7.16b bl aes_decrypt_block4x eor v3.16b, v3.16b, v7.16b eor v0.16b, v0.16b, v4.16b eor v1.16b, v1.16b, v5.16b eor v2.16b, v2.16b, v6.16b - st1 {v0.16b-v3.16b}, [x19], #64 + st1 {v0.16b-v3.16b}, [x0], #64 mov v4.16b, v7.16b - cbz w23, .Lxtsdecout - st1 {v4.16b}, [x24] - cond_yield_neon .Lxtsdecrestart + cbz w4, .Lxtsdecout + xts_reload_mask v8 b .LxtsdecloopNx .Lxtsdec1x: - adds w23, w23, #4 + adds w4, w4, #4 beq .Lxtsdecout .Lxtsdecloop: - ld1 {v1.16b}, [x20], #16 + ld1 {v1.16b}, [x1], #16 eor v0.16b, v1.16b, v4.16b - decrypt_block v0, w22, x21, x8, w7 + decrypt_block v0, w3, x2, x8, w7 eor v0.16b, v0.16b, v4.16b - st1 {v0.16b}, [x19], #16 - subs w23, w23, #1 + st1 {v0.16b}, [x0], #16 + subs w4, w4, #1 beq .Lxtsdecout - next_tweak v4, v4, v7, v8 + next_tweak v4, v4, v8 b .Lxtsdecloop .Lxtsdecout: - st1 {v4.16b}, [x24] - frame_pop + st1 {v4.16b}, [x6] + ldp x29, x30, [sp], #16 ret AES_ENDPROC(aes_xts_decrypt) diff --git a/arch/arm64/crypto/aes-neon.S b/arch/arm64/crypto/aes-neon.S index 1c7b45b7268e..29100f692e8a 100644 --- a/arch/arm64/crypto/aes-neon.S +++ b/arch/arm64/crypto/aes-neon.S @@ -14,6 +14,12 @@ #define AES_ENTRY(func) ENTRY(neon_ ## func) #define AES_ENDPROC(func) ENDPROC(neon_ ## func) + xtsmask .req v7 + + .macro xts_reload_mask, tmp + xts_load_mask \tmp + .endm + /* multiply by polynomial 'x' in GF(2^8) */ .macro mul_by_x, out, in, temp, const sshr \temp, \in, #7 diff --git a/arch/arm64/crypto/crc32-ce-core.S b/arch/arm64/crypto/crc32-ce-core.S deleted file mode 100644 index 8061bf0f9c66..000000000000 --- a/arch/arm64/crypto/crc32-ce-core.S +++ /dev/null @@ -1,287 +0,0 @@ -/* - * Accelerated CRC32(C) using arm64 CRC, NEON and Crypto Extensions instructions - * - * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* GPL HEADER START - * - * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 only, - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License version 2 for more details (a copy is included - * in the LICENSE file that accompanied this code). - * - * You should have received a copy of the GNU General Public License - * version 2 along with this program; If not, see http://www.gnu.org/licenses - * - * Please visit http://www.xyratex.com/contact if you need additional - * information or have any questions. - * - * GPL HEADER END - */ - -/* - * Copyright 2012 Xyratex Technology Limited - * - * Using hardware provided PCLMULQDQ instruction to accelerate the CRC32 - * calculation. - * CRC32 polynomial:0x04c11db7(BE)/0xEDB88320(LE) - * PCLMULQDQ is a new instruction in Intel SSE4.2, the reference can be found - * at: - * http://www.intel.com/products/processor/manuals/ - * Intel(R) 64 and IA-32 Architectures Software Developer's Manual - * Volume 2B: Instruction Set Reference, N-Z - * - * Authors: Gregory Prestas <Gregory_Prestas@us.xyratex.com> - * Alexander Boyko <Alexander_Boyko@xyratex.com> - */ - -#include <linux/linkage.h> -#include <asm/assembler.h> - - .section ".rodata", "a" - .align 6 - .cpu generic+crypto+crc - -.Lcrc32_constants: - /* - * [x4*128+32 mod P(x) << 32)]' << 1 = 0x154442bd4 - * #define CONSTANT_R1 0x154442bd4LL - * - * [(x4*128-32 mod P(x) << 32)]' << 1 = 0x1c6e41596 - * #define CONSTANT_R2 0x1c6e41596LL - */ - .octa 0x00000001c6e415960000000154442bd4 - - /* - * [(x128+32 mod P(x) << 32)]' << 1 = 0x1751997d0 - * #define CONSTANT_R3 0x1751997d0LL - * - * [(x128-32 mod P(x) << 32)]' << 1 = 0x0ccaa009e - * #define CONSTANT_R4 0x0ccaa009eLL - */ - .octa 0x00000000ccaa009e00000001751997d0 - - /* - * [(x64 mod P(x) << 32)]' << 1 = 0x163cd6124 - * #define CONSTANT_R5 0x163cd6124LL - */ - .quad 0x0000000163cd6124 - .quad 0x00000000FFFFFFFF - - /* - * #define CRCPOLY_TRUE_LE_FULL 0x1DB710641LL - * - * Barrett Reduction constant (u64`) = u` = (x**64 / P(x))` - * = 0x1F7011641LL - * #define CONSTANT_RU 0x1F7011641LL - */ - .octa 0x00000001F701164100000001DB710641 - -.Lcrc32c_constants: - .octa 0x000000009e4addf800000000740eef02 - .octa 0x000000014cd00bd600000000f20c0dfe - .quad 0x00000000dd45aab8 - .quad 0x00000000FFFFFFFF - .octa 0x00000000dea713f10000000105ec76f0 - - vCONSTANT .req v0 - dCONSTANT .req d0 - qCONSTANT .req q0 - - BUF .req x19 - LEN .req x20 - CRC .req x21 - CONST .req x22 - - vzr .req v9 - - /** - * Calculate crc32 - * BUF - buffer - * LEN - sizeof buffer (multiple of 16 bytes), LEN should be > 63 - * CRC - initial crc32 - * return %eax crc32 - * uint crc32_pmull_le(unsigned char const *buffer, - * size_t len, uint crc32) - */ - .text -ENTRY(crc32_pmull_le) - adr_l x3, .Lcrc32_constants - b 0f - -ENTRY(crc32c_pmull_le) - adr_l x3, .Lcrc32c_constants - -0: frame_push 4, 64 - - mov BUF, x0 - mov LEN, x1 - mov CRC, x2 - mov CONST, x3 - - bic LEN, LEN, #15 - ld1 {v1.16b-v4.16b}, [BUF], #0x40 - movi vzr.16b, #0 - fmov dCONSTANT, CRC - eor v1.16b, v1.16b, vCONSTANT.16b - sub LEN, LEN, #0x40 - cmp LEN, #0x40 - b.lt less_64 - - ldr qCONSTANT, [CONST] - -loop_64: /* 64 bytes Full cache line folding */ - sub LEN, LEN, #0x40 - - pmull2 v5.1q, v1.2d, vCONSTANT.2d - pmull2 v6.1q, v2.2d, vCONSTANT.2d - pmull2 v7.1q, v3.2d, vCONSTANT.2d - pmull2 v8.1q, v4.2d, vCONSTANT.2d - - pmull v1.1q, v1.1d, vCONSTANT.1d - pmull v2.1q, v2.1d, vCONSTANT.1d - pmull v3.1q, v3.1d, vCONSTANT.1d - pmull v4.1q, v4.1d, vCONSTANT.1d - - eor v1.16b, v1.16b, v5.16b - ld1 {v5.16b}, [BUF], #0x10 - eor v2.16b, v2.16b, v6.16b - ld1 {v6.16b}, [BUF], #0x10 - eor v3.16b, v3.16b, v7.16b - ld1 {v7.16b}, [BUF], #0x10 - eor v4.16b, v4.16b, v8.16b - ld1 {v8.16b}, [BUF], #0x10 - - eor v1.16b, v1.16b, v5.16b - eor v2.16b, v2.16b, v6.16b - eor v3.16b, v3.16b, v7.16b - eor v4.16b, v4.16b, v8.16b - - cmp LEN, #0x40 - b.lt less_64 - - if_will_cond_yield_neon - stp q1, q2, [sp, #.Lframe_local_offset] - stp q3, q4, [sp, #.Lframe_local_offset + 32] - do_cond_yield_neon - ldp q1, q2, [sp, #.Lframe_local_offset] - ldp q3, q4, [sp, #.Lframe_local_offset + 32] - ldr qCONSTANT, [CONST] - movi vzr.16b, #0 - endif_yield_neon - b loop_64 - -less_64: /* Folding cache line into 128bit */ - ldr qCONSTANT, [CONST, #16] - - pmull2 v5.1q, v1.2d, vCONSTANT.2d - pmull v1.1q, v1.1d, vCONSTANT.1d - eor v1.16b, v1.16b, v5.16b - eor v1.16b, v1.16b, v2.16b - - pmull2 v5.1q, v1.2d, vCONSTANT.2d - pmull v1.1q, v1.1d, vCONSTANT.1d - eor v1.16b, v1.16b, v5.16b - eor v1.16b, v1.16b, v3.16b - - pmull2 v5.1q, v1.2d, vCONSTANT.2d - pmull v1.1q, v1.1d, vCONSTANT.1d - eor v1.16b, v1.16b, v5.16b - eor v1.16b, v1.16b, v4.16b - - cbz LEN, fold_64 - -loop_16: /* Folding rest buffer into 128bit */ - subs LEN, LEN, #0x10 - - ld1 {v2.16b}, [BUF], #0x10 - pmull2 v5.1q, v1.2d, vCONSTANT.2d - pmull v1.1q, v1.1d, vCONSTANT.1d - eor v1.16b, v1.16b, v5.16b - eor v1.16b, v1.16b, v2.16b - - b.ne loop_16 - -fold_64: - /* perform the last 64 bit fold, also adds 32 zeroes - * to the input stream */ - ext v2.16b, v1.16b, v1.16b, #8 - pmull2 v2.1q, v2.2d, vCONSTANT.2d - ext v1.16b, v1.16b, vzr.16b, #8 - eor v1.16b, v1.16b, v2.16b - - /* final 32-bit fold */ - ldr dCONSTANT, [CONST, #32] - ldr d3, [CONST, #40] - - ext v2.16b, v1.16b, vzr.16b, #4 - and v1.16b, v1.16b, v3.16b - pmull v1.1q, v1.1d, vCONSTANT.1d - eor v1.16b, v1.16b, v2.16b - - /* Finish up with the bit-reversed barrett reduction 64 ==> 32 bits */ - ldr qCONSTANT, [CONST, #48] - - and v2.16b, v1.16b, v3.16b - ext v2.16b, vzr.16b, v2.16b, #8 - pmull2 v2.1q, v2.2d, vCONSTANT.2d - and v2.16b, v2.16b, v3.16b - pmull v2.1q, v2.1d, vCONSTANT.1d - eor v1.16b, v1.16b, v2.16b - mov w0, v1.s[1] - - frame_pop - ret -ENDPROC(crc32_pmull_le) -ENDPROC(crc32c_pmull_le) - - .macro __crc32, c -0: subs x2, x2, #16 - b.mi 8f - ldp x3, x4, [x1], #16 -CPU_BE( rev x3, x3 ) -CPU_BE( rev x4, x4 ) - crc32\c\()x w0, w0, x3 - crc32\c\()x w0, w0, x4 - b.ne 0b - ret - -8: tbz x2, #3, 4f - ldr x3, [x1], #8 -CPU_BE( rev x3, x3 ) - crc32\c\()x w0, w0, x3 -4: tbz x2, #2, 2f - ldr w3, [x1], #4 -CPU_BE( rev w3, w3 ) - crc32\c\()w w0, w0, w3 -2: tbz x2, #1, 1f - ldrh w3, [x1], #2 -CPU_BE( rev16 w3, w3 ) - crc32\c\()h w0, w0, w3 -1: tbz x2, #0, 0f - ldrb w3, [x1] - crc32\c\()b w0, w0, w3 -0: ret - .endm - - .align 5 -ENTRY(crc32_armv8_le) - __crc32 -ENDPROC(crc32_armv8_le) - - .align 5 -ENTRY(crc32c_armv8_le) - __crc32 c -ENDPROC(crc32c_armv8_le) diff --git a/arch/arm64/crypto/crc32-ce-glue.c b/arch/arm64/crypto/crc32-ce-glue.c deleted file mode 100644 index 34b4e3d46aab..000000000000 --- a/arch/arm64/crypto/crc32-ce-glue.c +++ /dev/null @@ -1,244 +0,0 @@ -/* - * Accelerated CRC32(C) using arm64 NEON and Crypto Extensions instructions - * - * Copyright (C) 2016 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/cpufeature.h> -#include <linux/crc32.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/string.h> - -#include <crypto/internal/hash.h> - -#include <asm/hwcap.h> -#include <asm/neon.h> -#include <asm/simd.h> -#include <asm/unaligned.h> - -#define PMULL_MIN_LEN 64L /* minimum size of buffer - * for crc32_pmull_le_16 */ -#define SCALE_F 16L /* size of NEON register */ - -asmlinkage u32 crc32_pmull_le(const u8 buf[], u64 len, u32 init_crc); -asmlinkage u32 crc32_armv8_le(u32 init_crc, const u8 buf[], size_t len); - -asmlinkage u32 crc32c_pmull_le(const u8 buf[], u64 len, u32 init_crc); -asmlinkage u32 crc32c_armv8_le(u32 init_crc, const u8 buf[], size_t len); - -static u32 (*fallback_crc32)(u32 init_crc, const u8 buf[], size_t len); -static u32 (*fallback_crc32c)(u32 init_crc, const u8 buf[], size_t len); - -static int crc32_pmull_cra_init(struct crypto_tfm *tfm) -{ - u32 *key = crypto_tfm_ctx(tfm); - - *key = 0; - return 0; -} - -static int crc32c_pmull_cra_init(struct crypto_tfm *tfm) -{ - u32 *key = crypto_tfm_ctx(tfm); - - *key = ~0; - return 0; -} - -static int crc32_pmull_setkey(struct crypto_shash *hash, const u8 *key, - unsigned int keylen) -{ - u32 *mctx = crypto_shash_ctx(hash); - - if (keylen != sizeof(u32)) { - crypto_shash_set_flags(hash, CRYPTO_TFM_RES_BAD_KEY_LEN); - return -EINVAL; - } - *mctx = le32_to_cpup((__le32 *)key); - return 0; -} - -static int crc32_pmull_init(struct shash_desc *desc) -{ - u32 *mctx = crypto_shash_ctx(desc->tfm); - u32 *crc = shash_desc_ctx(desc); - - *crc = *mctx; - return 0; -} - -static int crc32_update(struct shash_desc *desc, const u8 *data, - unsigned int length) -{ - u32 *crc = shash_desc_ctx(desc); - - *crc = crc32_armv8_le(*crc, data, length); - return 0; -} - -static int crc32c_update(struct shash_desc *desc, const u8 *data, - unsigned int length) -{ - u32 *crc = shash_desc_ctx(desc); - - *crc = crc32c_armv8_le(*crc, data, length); - return 0; -} - -static int crc32_pmull_update(struct shash_desc *desc, const u8 *data, - unsigned int length) -{ - u32 *crc = shash_desc_ctx(desc); - unsigned int l; - - if ((u64)data % SCALE_F) { - l = min_t(u32, length, SCALE_F - ((u64)data % SCALE_F)); - - *crc = fallback_crc32(*crc, data, l); - - data += l; - length -= l; - } - - if (length >= PMULL_MIN_LEN && may_use_simd()) { - l = round_down(length, SCALE_F); - - kernel_neon_begin(); - *crc = crc32_pmull_le(data, l, *crc); - kernel_neon_end(); - - data += l; - length -= l; - } - - if (length > 0) - *crc = fallback_crc32(*crc, data, length); - - return 0; -} - -static int crc32c_pmull_update(struct shash_desc *desc, const u8 *data, - unsigned int length) -{ - u32 *crc = shash_desc_ctx(desc); - unsigned int l; - - if ((u64)data % SCALE_F) { - l = min_t(u32, length, SCALE_F - ((u64)data % SCALE_F)); - - *crc = fallback_crc32c(*crc, data, l); - - data += l; - length -= l; - } - - if (length >= PMULL_MIN_LEN && may_use_simd()) { - l = round_down(length, SCALE_F); - - kernel_neon_begin(); - *crc = crc32c_pmull_le(data, l, *crc); - kernel_neon_end(); - - data += l; - length -= l; - } - - if (length > 0) { - *crc = fallback_crc32c(*crc, data, length); - } - - return 0; -} - -static int crc32_pmull_final(struct shash_desc *desc, u8 *out) -{ - u32 *crc = shash_desc_ctx(desc); - - put_unaligned_le32(*crc, out); - return 0; -} - -static int crc32c_pmull_final(struct shash_desc *desc, u8 *out) -{ - u32 *crc = shash_desc_ctx(desc); - - put_unaligned_le32(~*crc, out); - return 0; -} - -static struct shash_alg crc32_pmull_algs[] = { { - .setkey = crc32_pmull_setkey, - .init = crc32_pmull_init, - .update = crc32_update, - .final = crc32_pmull_final, - .descsize = sizeof(u32), - .digestsize = sizeof(u32), - - .base.cra_ctxsize = sizeof(u32), - .base.cra_init = crc32_pmull_cra_init, - .base.cra_name = "crc32", - .base.cra_driver_name = "crc32-arm64-ce", - .base.cra_priority = 200, - .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, - .base.cra_blocksize = 1, - .base.cra_module = THIS_MODULE, -}, { - .setkey = crc32_pmull_setkey, - .init = crc32_pmull_init, - .update = crc32c_update, - .final = crc32c_pmull_final, - .descsize = sizeof(u32), - .digestsize = sizeof(u32), - - .base.cra_ctxsize = sizeof(u32), - .base.cra_init = crc32c_pmull_cra_init, - .base.cra_name = "crc32c", - .base.cra_driver_name = "crc32c-arm64-ce", - .base.cra_priority = 200, - .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, - .base.cra_blocksize = 1, - .base.cra_module = THIS_MODULE, -} }; - -static int __init crc32_pmull_mod_init(void) -{ - if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && (elf_hwcap & HWCAP_PMULL)) { - crc32_pmull_algs[0].update = crc32_pmull_update; - crc32_pmull_algs[1].update = crc32c_pmull_update; - - if (elf_hwcap & HWCAP_CRC32) { - fallback_crc32 = crc32_armv8_le; - fallback_crc32c = crc32c_armv8_le; - } else { - fallback_crc32 = crc32_le; - fallback_crc32c = __crc32c_le; - } - } else if (!(elf_hwcap & HWCAP_CRC32)) { - return -ENODEV; - } - return crypto_register_shashes(crc32_pmull_algs, - ARRAY_SIZE(crc32_pmull_algs)); -} - -static void __exit crc32_pmull_mod_exit(void) -{ - crypto_unregister_shashes(crc32_pmull_algs, - ARRAY_SIZE(crc32_pmull_algs)); -} - -static const struct cpu_feature crc32_cpu_feature[] = { - { cpu_feature(CRC32) }, { cpu_feature(PMULL) }, { } -}; -MODULE_DEVICE_TABLE(cpu, crc32_cpu_feature); - -module_init(crc32_pmull_mod_init); -module_exit(crc32_pmull_mod_exit); - -MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); -MODULE_LICENSE("GPL v2"); diff --git a/arch/arm64/crypto/crct10dif-ce-core.S b/arch/arm64/crypto/crct10dif-ce-core.S index 663ea71cdb38..9e82e8e8ed05 100644 --- a/arch/arm64/crypto/crct10dif-ce-core.S +++ b/arch/arm64/crypto/crct10dif-ce-core.S @@ -80,7 +80,186 @@ vzr .req v13 -ENTRY(crc_t10dif_pmull) + ad .req v14 + bd .req v10 + + k00_16 .req v15 + k32_48 .req v16 + + t3 .req v17 + t4 .req v18 + t5 .req v19 + t6 .req v20 + t7 .req v21 + t8 .req v22 + t9 .req v23 + + perm1 .req v24 + perm2 .req v25 + perm3 .req v26 + perm4 .req v27 + + bd1 .req v28 + bd2 .req v29 + bd3 .req v30 + bd4 .req v31 + + .macro __pmull_init_p64 + .endm + + .macro __pmull_pre_p64, bd + .endm + + .macro __pmull_init_p8 + // k00_16 := 0x0000000000000000_000000000000ffff + // k32_48 := 0x00000000ffffffff_0000ffffffffffff + movi k32_48.2d, #0xffffffff + mov k32_48.h[2], k32_48.h[0] + ushr k00_16.2d, k32_48.2d, #32 + + // prepare the permutation vectors + mov_q x5, 0x080f0e0d0c0b0a09 + movi perm4.8b, #8 + dup perm1.2d, x5 + eor perm1.16b, perm1.16b, perm4.16b + ushr perm2.2d, perm1.2d, #8 + ushr perm3.2d, perm1.2d, #16 + ushr perm4.2d, perm1.2d, #24 + sli perm2.2d, perm1.2d, #56 + sli perm3.2d, perm1.2d, #48 + sli perm4.2d, perm1.2d, #40 + .endm + + .macro __pmull_pre_p8, bd + tbl bd1.16b, {\bd\().16b}, perm1.16b + tbl bd2.16b, {\bd\().16b}, perm2.16b + tbl bd3.16b, {\bd\().16b}, perm3.16b + tbl bd4.16b, {\bd\().16b}, perm4.16b + .endm + +__pmull_p8_core: +.L__pmull_p8_core: + ext t4.8b, ad.8b, ad.8b, #1 // A1 + ext t5.8b, ad.8b, ad.8b, #2 // A2 + ext t6.8b, ad.8b, ad.8b, #3 // A3 + + pmull t4.8h, t4.8b, bd.8b // F = A1*B + pmull t8.8h, ad.8b, bd1.8b // E = A*B1 + pmull t5.8h, t5.8b, bd.8b // H = A2*B + pmull t7.8h, ad.8b, bd2.8b // G = A*B2 + pmull t6.8h, t6.8b, bd.8b // J = A3*B + pmull t9.8h, ad.8b, bd3.8b // I = A*B3 + pmull t3.8h, ad.8b, bd4.8b // K = A*B4 + b 0f + +.L__pmull_p8_core2: + tbl t4.16b, {ad.16b}, perm1.16b // A1 + tbl t5.16b, {ad.16b}, perm2.16b // A2 + tbl t6.16b, {ad.16b}, perm3.16b // A3 + + pmull2 t4.8h, t4.16b, bd.16b // F = A1*B + pmull2 t8.8h, ad.16b, bd1.16b // E = A*B1 + pmull2 t5.8h, t5.16b, bd.16b // H = A2*B + pmull2 t7.8h, ad.16b, bd2.16b // G = A*B2 + pmull2 t6.8h, t6.16b, bd.16b // J = A3*B + pmull2 t9.8h, ad.16b, bd3.16b // I = A*B3 + pmull2 t3.8h, ad.16b, bd4.16b // K = A*B4 + +0: eor t4.16b, t4.16b, t8.16b // L = E + F + eor t5.16b, t5.16b, t7.16b // M = G + H + eor t6.16b, t6.16b, t9.16b // N = I + J + + uzp1 t8.2d, t4.2d, t5.2d + uzp2 t4.2d, t4.2d, t5.2d + uzp1 t7.2d, t6.2d, t3.2d + uzp2 t6.2d, t6.2d, t3.2d + + // t4 = (L) (P0 + P1) << 8 + // t5 = (M) (P2 + P3) << 16 + eor t8.16b, t8.16b, t4.16b + and t4.16b, t4.16b, k32_48.16b + + // t6 = (N) (P4 + P5) << 24 + // t7 = (K) (P6 + P7) << 32 + eor t7.16b, t7.16b, t6.16b + and t6.16b, t6.16b, k00_16.16b + + eor t8.16b, t8.16b, t4.16b + eor t7.16b, t7.16b, t6.16b + + zip2 t5.2d, t8.2d, t4.2d + zip1 t4.2d, t8.2d, t4.2d + zip2 t3.2d, t7.2d, t6.2d + zip1 t6.2d, t7.2d, t6.2d + + ext t4.16b, t4.16b, t4.16b, #15 + ext t5.16b, t5.16b, t5.16b, #14 + ext t6.16b, t6.16b, t6.16b, #13 + ext t3.16b, t3.16b, t3.16b, #12 + + eor t4.16b, t4.16b, t5.16b + eor t6.16b, t6.16b, t3.16b + ret +ENDPROC(__pmull_p8_core) + + .macro __pmull_p8, rq, ad, bd, i + .ifnc \bd, v10 + .err + .endif + mov ad.16b, \ad\().16b + .ifb \i + pmull \rq\().8h, \ad\().8b, bd.8b // D = A*B + .else + pmull2 \rq\().8h, \ad\().16b, bd.16b // D = A*B + .endif + + bl .L__pmull_p8_core\i + + eor \rq\().16b, \rq\().16b, t4.16b + eor \rq\().16b, \rq\().16b, t6.16b + .endm + + .macro fold64, p, reg1, reg2 + ldp q11, q12, [arg2], #0x20 + + __pmull_\p v8, \reg1, v10, 2 + __pmull_\p \reg1, \reg1, v10 + +CPU_LE( rev64 v11.16b, v11.16b ) +CPU_LE( rev64 v12.16b, v12.16b ) + + __pmull_\p v9, \reg2, v10, 2 + __pmull_\p \reg2, \reg2, v10 + +CPU_LE( ext v11.16b, v11.16b, v11.16b, #8 ) +CPU_LE( ext v12.16b, v12.16b, v12.16b, #8 ) + + eor \reg1\().16b, \reg1\().16b, v8.16b + eor \reg2\().16b, \reg2\().16b, v9.16b + eor \reg1\().16b, \reg1\().16b, v11.16b + eor \reg2\().16b, \reg2\().16b, v12.16b + .endm + + .macro fold16, p, reg, rk + __pmull_\p v8, \reg, v10 + __pmull_\p \reg, \reg, v10, 2 + .ifnb \rk + ldr_l q10, \rk, x8 + __pmull_pre_\p v10 + .endif + eor v7.16b, v7.16b, v8.16b + eor v7.16b, v7.16b, \reg\().16b + .endm + + .macro __pmull_p64, rd, rn, rm, n + .ifb \n + pmull \rd\().1q, \rn\().1d, \rm\().1d + .else + pmull2 \rd\().1q, \rn\().2d, \rm\().2d + .endif + .endm + + .macro crc_t10dif_pmull, p frame_push 3, 128 mov arg1_low32, w0 @@ -89,6 +268,8 @@ ENTRY(crc_t10dif_pmull) movi vzr.16b, #0 // init zero register + __pmull_init_\p + // adjust the 16-bit initial_crc value, scale it to 32 bits lsl arg1_low32, arg1_low32, #16 @@ -96,7 +277,7 @@ ENTRY(crc_t10dif_pmull) cmp arg3, #256 // for sizes less than 128, we can't fold 64B at a time... - b.lt _less_than_128 + b.lt .L_less_than_128_\@ // load the initial crc value // crc value does not need to be byte-reflected, but it needs @@ -137,6 +318,7 @@ CPU_LE( ext v7.16b, v7.16b, v7.16b, #8 ) ldr_l q10, rk3, x8 // xmm10 has rk3 and rk4 // type of pmull instruction // will determine which constant to use + __pmull_pre_\p v10 // // we subtract 256 instead of 128 to save one instruction from the loop @@ -147,41 +329,19 @@ CPU_LE( ext v7.16b, v7.16b, v7.16b, #8 ) // buffer. The _fold_64_B_loop will fold 64B at a time // until we have 64+y Bytes of buffer - // fold 64B at a time. This section of the code folds 4 vector // registers in parallel -_fold_64_B_loop: +.L_fold_64_B_loop_\@: - .macro fold64, reg1, reg2 - ldp q11, q12, [arg2], #0x20 - - pmull2 v8.1q, \reg1\().2d, v10.2d - pmull \reg1\().1q, \reg1\().1d, v10.1d - -CPU_LE( rev64 v11.16b, v11.16b ) -CPU_LE( rev64 v12.16b, v12.16b ) - - pmull2 v9.1q, \reg2\().2d, v10.2d - pmull \reg2\().1q, \reg2\().1d, v10.1d - -CPU_LE( ext v11.16b, v11.16b, v11.16b, #8 ) -CPU_LE( ext v12.16b, v12.16b, v12.16b, #8 ) - - eor \reg1\().16b, \reg1\().16b, v8.16b - eor \reg2\().16b, \reg2\().16b, v9.16b - eor \reg1\().16b, \reg1\().16b, v11.16b - eor \reg2\().16b, \reg2\().16b, v12.16b - .endm - - fold64 v0, v1 - fold64 v2, v3 - fold64 v4, v5 - fold64 v6, v7 + fold64 \p, v0, v1 + fold64 \p, v2, v3 + fold64 \p, v4, v5 + fold64 \p, v6, v7 subs arg3, arg3, #128 // check if there is another 64B in the buffer to be able to fold - b.lt _fold_64_B_end + b.lt .L_fold_64_B_end_\@ if_will_cond_yield_neon stp q0, q1, [sp, #.Lframe_local_offset] @@ -195,11 +355,13 @@ CPU_LE( ext v12.16b, v12.16b, v12.16b, #8 ) ldp q6, q7, [sp, #.Lframe_local_offset + 96] ldr_l q10, rk3, x8 movi vzr.16b, #0 // init zero register + __pmull_init_\p + __pmull_pre_\p v10 endif_yield_neon - b _fold_64_B_loop + b .L_fold_64_B_loop_\@ -_fold_64_B_end: +.L_fold_64_B_end_\@: // at this point, the buffer pointer is pointing at the last y Bytes // of the buffer the 64B of folded data is in 4 of the vector // registers: v0, v1, v2, v3 @@ -208,38 +370,29 @@ _fold_64_B_end: // constants ldr_l q10, rk9, x8 + __pmull_pre_\p v10 - .macro fold16, reg, rk - pmull v8.1q, \reg\().1d, v10.1d - pmull2 \reg\().1q, \reg\().2d, v10.2d - .ifnb \rk - ldr_l q10, \rk, x8 - .endif - eor v7.16b, v7.16b, v8.16b - eor v7.16b, v7.16b, \reg\().16b - .endm - - fold16 v0, rk11 - fold16 v1, rk13 - fold16 v2, rk15 - fold16 v3, rk17 - fold16 v4, rk19 - fold16 v5, rk1 - fold16 v6 + fold16 \p, v0, rk11 + fold16 \p, v1, rk13 + fold16 \p, v2, rk15 + fold16 \p, v3, rk17 + fold16 \p, v4, rk19 + fold16 \p, v5, rk1 + fold16 \p, v6 // instead of 64, we add 48 to the loop counter to save 1 instruction // from the loop instead of a cmp instruction, we use the negative // flag with the jl instruction adds arg3, arg3, #(128-16) - b.lt _final_reduction_for_128 + b.lt .L_final_reduction_for_128_\@ // now we have 16+y bytes left to reduce. 16 Bytes is in register v7 // and the rest is in memory. We can fold 16 bytes at a time if y>=16 // continue folding 16B at a time -_16B_reduction_loop: - pmull v8.1q, v7.1d, v10.1d - pmull2 v7.1q, v7.2d, v10.2d +.L_16B_reduction_loop_\@: + __pmull_\p v8, v7, v10 + __pmull_\p v7, v7, v10, 2 eor v7.16b, v7.16b, v8.16b ldr q0, [arg2], #16 @@ -251,22 +404,22 @@ CPU_LE( ext v0.16b, v0.16b, v0.16b, #8 ) // instead of a cmp instruction, we utilize the flags with the // jge instruction equivalent of: cmp arg3, 16-16 // check if there is any more 16B in the buffer to be able to fold - b.ge _16B_reduction_loop + b.ge .L_16B_reduction_loop_\@ // now we have 16+z bytes left to reduce, where 0<= z < 16. // first, we reduce the data in the xmm7 register -_final_reduction_for_128: +.L_final_reduction_for_128_\@: // check if any more data to fold. If not, compute the CRC of // the final 128 bits adds arg3, arg3, #16 - b.eq _128_done + b.eq .L_128_done_\@ // here we are getting data that is less than 16 bytes. // since we know that there was data before the pointer, we can // offset the input pointer before the actual point, to receive // exactly 16 bytes. after that the registers need to be adjusted. -_get_last_two_regs: +.L_get_last_two_regs_\@: add arg2, arg2, arg3 ldr q1, [arg2, #-16] CPU_LE( rev64 v1.16b, v1.16b ) @@ -291,47 +444,48 @@ CPU_LE( ext v1.16b, v1.16b, v1.16b, #8 ) bsl v0.16b, v2.16b, v1.16b // fold 16 Bytes - pmull v8.1q, v7.1d, v10.1d - pmull2 v7.1q, v7.2d, v10.2d + __pmull_\p v8, v7, v10 + __pmull_\p v7, v7, v10, 2 eor v7.16b, v7.16b, v8.16b eor v7.16b, v7.16b, v0.16b -_128_done: +.L_128_done_\@: // compute crc of a 128-bit value ldr_l q10, rk5, x8 // rk5 and rk6 in xmm10 + __pmull_pre_\p v10 // 64b fold ext v0.16b, vzr.16b, v7.16b, #8 mov v7.d[0], v7.d[1] - pmull v7.1q, v7.1d, v10.1d + __pmull_\p v7, v7, v10 eor v7.16b, v7.16b, v0.16b // 32b fold ext v0.16b, v7.16b, vzr.16b, #4 mov v7.s[3], vzr.s[0] - pmull2 v0.1q, v0.2d, v10.2d + __pmull_\p v0, v0, v10, 2 eor v7.16b, v7.16b, v0.16b // barrett reduction -_barrett: ldr_l q10, rk7, x8 + __pmull_pre_\p v10 mov v0.d[0], v7.d[1] - pmull v0.1q, v0.1d, v10.1d + __pmull_\p v0, v0, v10 ext v0.16b, vzr.16b, v0.16b, #12 - pmull2 v0.1q, v0.2d, v10.2d + __pmull_\p v0, v0, v10, 2 ext v0.16b, vzr.16b, v0.16b, #12 eor v7.16b, v7.16b, v0.16b mov w0, v7.s[1] -_cleanup: +.L_cleanup_\@: // scale the result back to 16 bits lsr x0, x0, #16 frame_pop ret -_less_than_128: - cbz arg3, _cleanup +.L_less_than_128_\@: + cbz arg3, .L_cleanup_\@ movi v0.16b, #0 mov v0.s[3], arg1_low32 // get the initial crc value @@ -342,20 +496,21 @@ CPU_LE( ext v7.16b, v7.16b, v7.16b, #8 ) eor v7.16b, v7.16b, v0.16b // xor the initial crc value cmp arg3, #16 - b.eq _128_done // exactly 16 left - b.lt _less_than_16_left + b.eq .L_128_done_\@ // exactly 16 left + b.lt .L_less_than_16_left_\@ ldr_l q10, rk1, x8 // rk1 and rk2 in xmm10 + __pmull_pre_\p v10 // update the counter. subtract 32 instead of 16 to save one // instruction from the loop subs arg3, arg3, #32 - b.ge _16B_reduction_loop + b.ge .L_16B_reduction_loop_\@ add arg3, arg3, #16 - b _get_last_two_regs + b .L_get_last_two_regs_\@ -_less_than_16_left: +.L_less_than_16_left_\@: // shl r9, 4 adr_l x0, tbl_shf_table + 16 sub x0, x0, arg3 @@ -363,8 +518,17 @@ _less_than_16_left: movi v9.16b, #0x80 eor v0.16b, v0.16b, v9.16b tbl v7.16b, {v7.16b}, v0.16b - b _128_done -ENDPROC(crc_t10dif_pmull) + b .L_128_done_\@ + .endm + +ENTRY(crc_t10dif_pmull_p8) + crc_t10dif_pmull p8 +ENDPROC(crc_t10dif_pmull_p8) + + .align 5 +ENTRY(crc_t10dif_pmull_p64) + crc_t10dif_pmull p64 +ENDPROC(crc_t10dif_pmull_p64) // precomputed constants // these constants are precomputed from the poly: diff --git a/arch/arm64/crypto/crct10dif-ce-glue.c b/arch/arm64/crypto/crct10dif-ce-glue.c index 96f0cae4a022..b461d62023f2 100644 --- a/arch/arm64/crypto/crct10dif-ce-glue.c +++ b/arch/arm64/crypto/crct10dif-ce-glue.c @@ -22,7 +22,10 @@ #define CRC_T10DIF_PMULL_CHUNK_SIZE 16U -asmlinkage u16 crc_t10dif_pmull(u16 init_crc, const u8 buf[], u64 len); +asmlinkage u16 crc_t10dif_pmull_p64(u16 init_crc, const u8 buf[], u64 len); +asmlinkage u16 crc_t10dif_pmull_p8(u16 init_crc, const u8 buf[], u64 len); + +static u16 (*crc_t10dif_pmull)(u16 init_crc, const u8 buf[], u64 len); static int crct10dif_init(struct shash_desc *desc) { @@ -85,6 +88,11 @@ static struct shash_alg crc_t10dif_alg = { static int __init crc_t10dif_mod_init(void) { + if (elf_hwcap & HWCAP_PMULL) + crc_t10dif_pmull = crc_t10dif_pmull_p64; + else + crc_t10dif_pmull = crc_t10dif_pmull_p8; + return crypto_register_shash(&crc_t10dif_alg); } @@ -93,8 +101,10 @@ static void __exit crc_t10dif_mod_exit(void) crypto_unregister_shash(&crc_t10dif_alg); } -module_cpu_feature_match(PMULL, crc_t10dif_mod_init); +module_cpu_feature_match(ASIMD, crc_t10dif_mod_init); module_exit(crc_t10dif_mod_exit); MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_CRYPTO("crct10dif"); +MODULE_ALIAS_CRYPTO("crct10dif-arm64-ce"); diff --git a/arch/arm64/crypto/ghash-ce-glue.c b/arch/arm64/crypto/ghash-ce-glue.c index 6e9f33d14930..067d8937d5af 100644 --- a/arch/arm64/crypto/ghash-ce-glue.c +++ b/arch/arm64/crypto/ghash-ce-glue.c @@ -417,7 +417,7 @@ static int gcm_encrypt(struct aead_request *req) __aes_arm64_encrypt(ctx->aes_key.key_enc, tag, iv, nrounds); put_unaligned_be32(2, iv + GCM_IV_SIZE); - while (walk.nbytes >= AES_BLOCK_SIZE) { + while (walk.nbytes >= (2 * AES_BLOCK_SIZE)) { int blocks = walk.nbytes / AES_BLOCK_SIZE; u8 *dst = walk.dst.virt.addr; u8 *src = walk.src.virt.addr; @@ -437,11 +437,18 @@ static int gcm_encrypt(struct aead_request *req) NULL); err = skcipher_walk_done(&walk, - walk.nbytes % AES_BLOCK_SIZE); + walk.nbytes % (2 * AES_BLOCK_SIZE)); } - if (walk.nbytes) + if (walk.nbytes) { __aes_arm64_encrypt(ctx->aes_key.key_enc, ks, iv, nrounds); + if (walk.nbytes > AES_BLOCK_SIZE) { + crypto_inc(iv, AES_BLOCK_SIZE); + __aes_arm64_encrypt(ctx->aes_key.key_enc, + ks + AES_BLOCK_SIZE, iv, + nrounds); + } + } } /* handle the tail */ @@ -545,7 +552,7 @@ static int gcm_decrypt(struct aead_request *req) __aes_arm64_encrypt(ctx->aes_key.key_enc, tag, iv, nrounds); put_unaligned_be32(2, iv + GCM_IV_SIZE); - while (walk.nbytes >= AES_BLOCK_SIZE) { + while (walk.nbytes >= (2 * AES_BLOCK_SIZE)) { int blocks = walk.nbytes / AES_BLOCK_SIZE; u8 *dst = walk.dst.virt.addr; u8 *src = walk.src.virt.addr; @@ -564,11 +571,21 @@ static int gcm_decrypt(struct aead_request *req) } while (--blocks > 0); err = skcipher_walk_done(&walk, - walk.nbytes % AES_BLOCK_SIZE); + walk.nbytes % (2 * AES_BLOCK_SIZE)); } - if (walk.nbytes) + if (walk.nbytes) { + if (walk.nbytes > AES_BLOCK_SIZE) { + u8 *iv2 = iv + AES_BLOCK_SIZE; + + memcpy(iv2, iv, AES_BLOCK_SIZE); + crypto_inc(iv2, AES_BLOCK_SIZE); + + __aes_arm64_encrypt(ctx->aes_key.key_enc, iv2, + iv2, nrounds); + } __aes_arm64_encrypt(ctx->aes_key.key_enc, iv, iv, nrounds); + } } /* handle the tail */ diff --git a/arch/arm64/crypto/sm4-ce-glue.c b/arch/arm64/crypto/sm4-ce-glue.c index b7fb5274b250..0c4fc223f225 100644 --- a/arch/arm64/crypto/sm4-ce-glue.c +++ b/arch/arm64/crypto/sm4-ce-glue.c @@ -69,5 +69,5 @@ static void __exit sm4_ce_mod_fini(void) crypto_unregister_alg(&sm4_ce_alg); } -module_cpu_feature_match(SM3, sm4_ce_mod_init); +module_cpu_feature_match(SM4, sm4_ce_mod_init); module_exit(sm4_ce_mod_fini); diff --git a/arch/arm64/crypto/speck-neon-core.S b/arch/arm64/crypto/speck-neon-core.S deleted file mode 100644 index b14463438b09..000000000000 --- a/arch/arm64/crypto/speck-neon-core.S +++ /dev/null @@ -1,352 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * ARM64 NEON-accelerated implementation of Speck128-XTS and Speck64-XTS - * - * Copyright (c) 2018 Google, Inc - * - * Author: Eric Biggers <ebiggers@google.com> - */ - -#include <linux/linkage.h> - - .text - - // arguments - ROUND_KEYS .req x0 // const {u64,u32} *round_keys - NROUNDS .req w1 // int nrounds - NROUNDS_X .req x1 - DST .req x2 // void *dst - SRC .req x3 // const void *src - NBYTES .req w4 // unsigned int nbytes - TWEAK .req x5 // void *tweak - - // registers which hold the data being encrypted/decrypted - // (underscores avoid a naming collision with ARM64 registers x0-x3) - X_0 .req v0 - Y_0 .req v1 - X_1 .req v2 - Y_1 .req v3 - X_2 .req v4 - Y_2 .req v5 - X_3 .req v6 - Y_3 .req v7 - - // the round key, duplicated in all lanes - ROUND_KEY .req v8 - - // index vector for tbl-based 8-bit rotates - ROTATE_TABLE .req v9 - ROTATE_TABLE_Q .req q9 - - // temporary registers - TMP0 .req v10 - TMP1 .req v11 - TMP2 .req v12 - TMP3 .req v13 - - // multiplication table for updating XTS tweaks - GFMUL_TABLE .req v14 - GFMUL_TABLE_Q .req q14 - - // next XTS tweak value(s) - TWEAKV_NEXT .req v15 - - // XTS tweaks for the blocks currently being encrypted/decrypted - TWEAKV0 .req v16 - TWEAKV1 .req v17 - TWEAKV2 .req v18 - TWEAKV3 .req v19 - TWEAKV4 .req v20 - TWEAKV5 .req v21 - TWEAKV6 .req v22 - TWEAKV7 .req v23 - - .align 4 -.Lror64_8_table: - .octa 0x080f0e0d0c0b0a090007060504030201 -.Lror32_8_table: - .octa 0x0c0f0e0d080b0a090407060500030201 -.Lrol64_8_table: - .octa 0x0e0d0c0b0a09080f0605040302010007 -.Lrol32_8_table: - .octa 0x0e0d0c0f0a09080b0605040702010003 -.Lgf128mul_table: - .octa 0x00000000000000870000000000000001 -.Lgf64mul_table: - .octa 0x0000000000000000000000002d361b00 - -/* - * _speck_round_128bytes() - Speck encryption round on 128 bytes at a time - * - * Do one Speck encryption round on the 128 bytes (8 blocks for Speck128, 16 for - * Speck64) stored in X0-X3 and Y0-Y3, using the round key stored in all lanes - * of ROUND_KEY. 'n' is the lane size: 64 for Speck128, or 32 for Speck64. - * 'lanes' is the lane specifier: "2d" for Speck128 or "4s" for Speck64. - */ -.macro _speck_round_128bytes n, lanes - - // x = ror(x, 8) - tbl X_0.16b, {X_0.16b}, ROTATE_TABLE.16b - tbl X_1.16b, {X_1.16b}, ROTATE_TABLE.16b - tbl X_2.16b, {X_2.16b}, ROTATE_TABLE.16b - tbl X_3.16b, {X_3.16b}, ROTATE_TABLE.16b - - // x += y - add X_0.\lanes, X_0.\lanes, Y_0.\lanes - add X_1.\lanes, X_1.\lanes, Y_1.\lanes - add X_2.\lanes, X_2.\lanes, Y_2.\lanes - add X_3.\lanes, X_3.\lanes, Y_3.\lanes - - // x ^= k - eor X_0.16b, X_0.16b, ROUND_KEY.16b - eor X_1.16b, X_1.16b, ROUND_KEY.16b - eor X_2.16b, X_2.16b, ROUND_KEY.16b - eor X_3.16b, X_3.16b, ROUND_KEY.16b - - // y = rol(y, 3) - shl TMP0.\lanes, Y_0.\lanes, #3 - shl TMP1.\lanes, Y_1.\lanes, #3 - shl TMP2.\lanes, Y_2.\lanes, #3 - shl TMP3.\lanes, Y_3.\lanes, #3 - sri TMP0.\lanes, Y_0.\lanes, #(\n - 3) - sri TMP1.\lanes, Y_1.\lanes, #(\n - 3) - sri TMP2.\lanes, Y_2.\lanes, #(\n - 3) - sri TMP3.\lanes, Y_3.\lanes, #(\n - 3) - - // y ^= x - eor Y_0.16b, TMP0.16b, X_0.16b - eor Y_1.16b, TMP1.16b, X_1.16b - eor Y_2.16b, TMP2.16b, X_2.16b - eor Y_3.16b, TMP3.16b, X_3.16b -.endm - -/* - * _speck_unround_128bytes() - Speck decryption round on 128 bytes at a time - * - * This is the inverse of _speck_round_128bytes(). - */ -.macro _speck_unround_128bytes n, lanes - - // y ^= x - eor TMP0.16b, Y_0.16b, X_0.16b - eor TMP1.16b, Y_1.16b, X_1.16b - eor TMP2.16b, Y_2.16b, X_2.16b - eor TMP3.16b, Y_3.16b, X_3.16b - - // y = ror(y, 3) - ushr Y_0.\lanes, TMP0.\lanes, #3 - ushr Y_1.\lanes, TMP1.\lanes, #3 - ushr Y_2.\lanes, TMP2.\lanes, #3 - ushr Y_3.\lanes, TMP3.\lanes, #3 - sli Y_0.\lanes, TMP0.\lanes, #(\n - 3) - sli Y_1.\lanes, TMP1.\lanes, #(\n - 3) - sli Y_2.\lanes, TMP2.\lanes, #(\n - 3) - sli Y_3.\lanes, TMP3.\lanes, #(\n - 3) - - // x ^= k - eor X_0.16b, X_0.16b, ROUND_KEY.16b - eor X_1.16b, X_1.16b, ROUND_KEY.16b - eor X_2.16b, X_2.16b, ROUND_KEY.16b - eor X_3.16b, X_3.16b, ROUND_KEY.16b - - // x -= y - sub X_0.\lanes, X_0.\lanes, Y_0.\lanes - sub X_1.\lanes, X_1.\lanes, Y_1.\lanes - sub X_2.\lanes, X_2.\lanes, Y_2.\lanes - sub X_3.\lanes, X_3.\lanes, Y_3.\lanes - - // x = rol(x, 8) - tbl X_0.16b, {X_0.16b}, ROTATE_TABLE.16b - tbl X_1.16b, {X_1.16b}, ROTATE_TABLE.16b - tbl X_2.16b, {X_2.16b}, ROTATE_TABLE.16b - tbl X_3.16b, {X_3.16b}, ROTATE_TABLE.16b -.endm - -.macro _next_xts_tweak next, cur, tmp, n -.if \n == 64 - /* - * Calculate the next tweak by multiplying the current one by x, - * modulo p(x) = x^128 + x^7 + x^2 + x + 1. - */ - sshr \tmp\().2d, \cur\().2d, #63 - and \tmp\().16b, \tmp\().16b, GFMUL_TABLE.16b - shl \next\().2d, \cur\().2d, #1 - ext \tmp\().16b, \tmp\().16b, \tmp\().16b, #8 - eor \next\().16b, \next\().16b, \tmp\().16b -.else - /* - * Calculate the next two tweaks by multiplying the current ones by x^2, - * modulo p(x) = x^64 + x^4 + x^3 + x + 1. - */ - ushr \tmp\().2d, \cur\().2d, #62 - shl \next\().2d, \cur\().2d, #2 - tbl \tmp\().16b, {GFMUL_TABLE.16b}, \tmp\().16b - eor \next\().16b, \next\().16b, \tmp\().16b -.endif -.endm - -/* - * _speck_xts_crypt() - Speck-XTS encryption/decryption - * - * Encrypt or decrypt NBYTES bytes of data from the SRC buffer to the DST buffer - * using Speck-XTS, specifically the variant with a block size of '2n' and round - * count given by NROUNDS. The expanded round keys are given in ROUND_KEYS, and - * the current XTS tweak value is given in TWEAK. It's assumed that NBYTES is a - * nonzero multiple of 128. - */ -.macro _speck_xts_crypt n, lanes, decrypting - - /* - * If decrypting, modify the ROUND_KEYS parameter to point to the last - * round key rather than the first, since for decryption the round keys - * are used in reverse order. - */ -.if \decrypting - mov NROUNDS, NROUNDS /* zero the high 32 bits */ -.if \n == 64 - add ROUND_KEYS, ROUND_KEYS, NROUNDS_X, lsl #3 - sub ROUND_KEYS, ROUND_KEYS, #8 -.else - add ROUND_KEYS, ROUND_KEYS, NROUNDS_X, lsl #2 - sub ROUND_KEYS, ROUND_KEYS, #4 -.endif -.endif - - // Load the index vector for tbl-based 8-bit rotates -.if \decrypting - ldr ROTATE_TABLE_Q, .Lrol\n\()_8_table -.else - ldr ROTATE_TABLE_Q, .Lror\n\()_8_table -.endif - - // One-time XTS preparation -.if \n == 64 - // Load first tweak - ld1 {TWEAKV0.16b}, [TWEAK] - - // Load GF(2^128) multiplication table - ldr GFMUL_TABLE_Q, .Lgf128mul_table -.else - // Load first tweak - ld1 {TWEAKV0.8b}, [TWEAK] - - // Load GF(2^64) multiplication table - ldr GFMUL_TABLE_Q, .Lgf64mul_table - - // Calculate second tweak, packing it together with the first - ushr TMP0.2d, TWEAKV0.2d, #63 - shl TMP1.2d, TWEAKV0.2d, #1 - tbl TMP0.8b, {GFMUL_TABLE.16b}, TMP0.8b - eor TMP0.8b, TMP0.8b, TMP1.8b - mov TWEAKV0.d[1], TMP0.d[0] -.endif - -.Lnext_128bytes_\@: - - // Calculate XTS tweaks for next 128 bytes - _next_xts_tweak TWEAKV1, TWEAKV0, TMP0, \n - _next_xts_tweak TWEAKV2, TWEAKV1, TMP0, \n - _next_xts_tweak TWEAKV3, TWEAKV2, TMP0, \n - _next_xts_tweak TWEAKV4, TWEAKV3, TMP0, \n - _next_xts_tweak TWEAKV5, TWEAKV4, TMP0, \n - _next_xts_tweak TWEAKV6, TWEAKV5, TMP0, \n - _next_xts_tweak TWEAKV7, TWEAKV6, TMP0, \n - _next_xts_tweak TWEAKV_NEXT, TWEAKV7, TMP0, \n - - // Load the next source blocks into {X,Y}[0-3] - ld1 {X_0.16b-Y_1.16b}, [SRC], #64 - ld1 {X_2.16b-Y_3.16b}, [SRC], #64 - - // XOR the source blocks with their XTS tweaks - eor TMP0.16b, X_0.16b, TWEAKV0.16b - eor Y_0.16b, Y_0.16b, TWEAKV1.16b - eor TMP1.16b, X_1.16b, TWEAKV2.16b - eor Y_1.16b, Y_1.16b, TWEAKV3.16b - eor TMP2.16b, X_2.16b, TWEAKV4.16b - eor Y_2.16b, Y_2.16b, TWEAKV5.16b - eor TMP3.16b, X_3.16b, TWEAKV6.16b - eor Y_3.16b, Y_3.16b, TWEAKV7.16b - - /* - * De-interleave the 'x' and 'y' elements of each block, i.e. make it so - * that the X[0-3] registers contain only the second halves of blocks, - * and the Y[0-3] registers contain only the first halves of blocks. - * (Speck uses the order (y, x) rather than the more intuitive (x, y).) - */ - uzp2 X_0.\lanes, TMP0.\lanes, Y_0.\lanes - uzp1 Y_0.\lanes, TMP0.\lanes, Y_0.\lanes - uzp2 X_1.\lanes, TMP1.\lanes, Y_1.\lanes - uzp1 Y_1.\lanes, TMP1.\lanes, Y_1.\lanes - uzp2 X_2.\lanes, TMP2.\lanes, Y_2.\lanes - uzp1 Y_2.\lanes, TMP2.\lanes, Y_2.\lanes - uzp2 X_3.\lanes, TMP3.\lanes, Y_3.\lanes - uzp1 Y_3.\lanes, TMP3.\lanes, Y_3.\lanes - - // Do the cipher rounds - mov x6, ROUND_KEYS - mov w7, NROUNDS -.Lnext_round_\@: -.if \decrypting - ld1r {ROUND_KEY.\lanes}, [x6] - sub x6, x6, #( \n / 8 ) - _speck_unround_128bytes \n, \lanes -.else - ld1r {ROUND_KEY.\lanes}, [x6], #( \n / 8 ) - _speck_round_128bytes \n, \lanes -.endif - subs w7, w7, #1 - bne .Lnext_round_\@ - - // Re-interleave the 'x' and 'y' elements of each block - zip1 TMP0.\lanes, Y_0.\lanes, X_0.\lanes - zip2 Y_0.\lanes, Y_0.\lanes, X_0.\lanes - zip1 TMP1.\lanes, Y_1.\lanes, X_1.\lanes - zip2 Y_1.\lanes, Y_1.\lanes, X_1.\lanes - zip1 TMP2.\lanes, Y_2.\lanes, X_2.\lanes - zip2 Y_2.\lanes, Y_2.\lanes, X_2.\lanes - zip1 TMP3.\lanes, Y_3.\lanes, X_3.\lanes - zip2 Y_3.\lanes, Y_3.\lanes, X_3.\lanes - - // XOR the encrypted/decrypted blocks with the tweaks calculated earlier - eor X_0.16b, TMP0.16b, TWEAKV0.16b - eor Y_0.16b, Y_0.16b, TWEAKV1.16b - eor X_1.16b, TMP1.16b, TWEAKV2.16b - eor Y_1.16b, Y_1.16b, TWEAKV3.16b - eor X_2.16b, TMP2.16b, TWEAKV4.16b - eor Y_2.16b, Y_2.16b, TWEAKV5.16b - eor X_3.16b, TMP3.16b, TWEAKV6.16b - eor Y_3.16b, Y_3.16b, TWEAKV7.16b - mov TWEAKV0.16b, TWEAKV_NEXT.16b - - // Store the ciphertext in the destination buffer - st1 {X_0.16b-Y_1.16b}, [DST], #64 - st1 {X_2.16b-Y_3.16b}, [DST], #64 - - // Continue if there are more 128-byte chunks remaining - subs NBYTES, NBYTES, #128 - bne .Lnext_128bytes_\@ - - // Store the next tweak and return -.if \n == 64 - st1 {TWEAKV_NEXT.16b}, [TWEAK] -.else - st1 {TWEAKV_NEXT.8b}, [TWEAK] -.endif - ret -.endm - -ENTRY(speck128_xts_encrypt_neon) - _speck_xts_crypt n=64, lanes=2d, decrypting=0 -ENDPROC(speck128_xts_encrypt_neon) - -ENTRY(speck128_xts_decrypt_neon) - _speck_xts_crypt n=64, lanes=2d, decrypting=1 -ENDPROC(speck128_xts_decrypt_neon) - -ENTRY(speck64_xts_encrypt_neon) - _speck_xts_crypt n=32, lanes=4s, decrypting=0 -ENDPROC(speck64_xts_encrypt_neon) - -ENTRY(speck64_xts_decrypt_neon) - _speck_xts_crypt n=32, lanes=4s, decrypting=1 -ENDPROC(speck64_xts_decrypt_neon) diff --git a/arch/arm64/crypto/speck-neon-glue.c b/arch/arm64/crypto/speck-neon-glue.c deleted file mode 100644 index 6e233aeb4ff4..000000000000 --- a/arch/arm64/crypto/speck-neon-glue.c +++ /dev/null @@ -1,282 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * NEON-accelerated implementation of Speck128-XTS and Speck64-XTS - * (64-bit version; based on the 32-bit version) - * - * Copyright (c) 2018 Google, Inc - */ - -#include <asm/hwcap.h> -#include <asm/neon.h> -#include <asm/simd.h> -#include <crypto/algapi.h> -#include <crypto/gf128mul.h> -#include <crypto/internal/skcipher.h> -#include <crypto/speck.h> -#include <crypto/xts.h> -#include <linux/kernel.h> -#include <linux/module.h> - -/* The assembly functions only handle multiples of 128 bytes */ -#define SPECK_NEON_CHUNK_SIZE 128 - -/* Speck128 */ - -struct speck128_xts_tfm_ctx { - struct speck128_tfm_ctx main_key; - struct speck128_tfm_ctx tweak_key; -}; - -asmlinkage void speck128_xts_encrypt_neon(const u64 *round_keys, int nrounds, - void *dst, const void *src, - unsigned int nbytes, void *tweak); - -asmlinkage void speck128_xts_decrypt_neon(const u64 *round_keys, int nrounds, - void *dst, const void *src, - unsigned int nbytes, void *tweak); - -typedef void (*speck128_crypt_one_t)(const struct speck128_tfm_ctx *, - u8 *, const u8 *); -typedef void (*speck128_xts_crypt_many_t)(const u64 *, int, void *, - const void *, unsigned int, void *); - -static __always_inline int -__speck128_xts_crypt(struct skcipher_request *req, - speck128_crypt_one_t crypt_one, - speck128_xts_crypt_many_t crypt_many) -{ - struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); - const struct speck128_xts_tfm_ctx *ctx = crypto_skcipher_ctx(tfm); - struct skcipher_walk walk; - le128 tweak; - int err; - - err = skcipher_walk_virt(&walk, req, true); - - crypto_speck128_encrypt(&ctx->tweak_key, (u8 *)&tweak, walk.iv); - - while (walk.nbytes > 0) { - unsigned int nbytes = walk.nbytes; - u8 *dst = walk.dst.virt.addr; - const u8 *src = walk.src.virt.addr; - - if (nbytes >= SPECK_NEON_CHUNK_SIZE && may_use_simd()) { - unsigned int count; - - count = round_down(nbytes, SPECK_NEON_CHUNK_SIZE); - kernel_neon_begin(); - (*crypt_many)(ctx->main_key.round_keys, - ctx->main_key.nrounds, - dst, src, count, &tweak); - kernel_neon_end(); - dst += count; - src += count; - nbytes -= count; - } - - /* Handle any remainder with generic code */ - while (nbytes >= sizeof(tweak)) { - le128_xor((le128 *)dst, (const le128 *)src, &tweak); - (*crypt_one)(&ctx->main_key, dst, dst); - le128_xor((le128 *)dst, (const le128 *)dst, &tweak); - gf128mul_x_ble(&tweak, &tweak); - - dst += sizeof(tweak); - src += sizeof(tweak); - nbytes -= sizeof(tweak); - } - err = skcipher_walk_done(&walk, nbytes); - } - - return err; -} - -static int speck128_xts_encrypt(struct skcipher_request *req) -{ - return __speck128_xts_crypt(req, crypto_speck128_encrypt, - speck128_xts_encrypt_neon); -} - -static int speck128_xts_decrypt(struct skcipher_request *req) -{ - return __speck128_xts_crypt(req, crypto_speck128_decrypt, - speck128_xts_decrypt_neon); -} - -static int speck128_xts_setkey(struct crypto_skcipher *tfm, const u8 *key, - unsigned int keylen) -{ - struct speck128_xts_tfm_ctx *ctx = crypto_skcipher_ctx(tfm); - int err; - - err = xts_verify_key(tfm, key, keylen); - if (err) - return err; - - keylen /= 2; - - err = crypto_speck128_setkey(&ctx->main_key, key, keylen); - if (err) - return err; - - return crypto_speck128_setkey(&ctx->tweak_key, key + keylen, keylen); -} - -/* Speck64 */ - -struct speck64_xts_tfm_ctx { - struct speck64_tfm_ctx main_key; - struct speck64_tfm_ctx tweak_key; -}; - -asmlinkage void speck64_xts_encrypt_neon(const u32 *round_keys, int nrounds, - void *dst, const void *src, - unsigned int nbytes, void *tweak); - -asmlinkage void speck64_xts_decrypt_neon(const u32 *round_keys, int nrounds, - void *dst, const void *src, - unsigned int nbytes, void *tweak); - -typedef void (*speck64_crypt_one_t)(const struct speck64_tfm_ctx *, - u8 *, const u8 *); -typedef void (*speck64_xts_crypt_many_t)(const u32 *, int, void *, - const void *, unsigned int, void *); - -static __always_inline int -__speck64_xts_crypt(struct skcipher_request *req, speck64_crypt_one_t crypt_one, - speck64_xts_crypt_many_t crypt_many) -{ - struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); - const struct speck64_xts_tfm_ctx *ctx = crypto_skcipher_ctx(tfm); - struct skcipher_walk walk; - __le64 tweak; - int err; - - err = skcipher_walk_virt(&walk, req, true); - - crypto_speck64_encrypt(&ctx->tweak_key, (u8 *)&tweak, walk.iv); - - while (walk.nbytes > 0) { - unsigned int nbytes = walk.nbytes; - u8 *dst = walk.dst.virt.addr; - const u8 *src = walk.src.virt.addr; - - if (nbytes >= SPECK_NEON_CHUNK_SIZE && may_use_simd()) { - unsigned int count; - - count = round_down(nbytes, SPECK_NEON_CHUNK_SIZE); - kernel_neon_begin(); - (*crypt_many)(ctx->main_key.round_keys, - ctx->main_key.nrounds, - dst, src, count, &tweak); - kernel_neon_end(); - dst += count; - src += count; - nbytes -= count; - } - - /* Handle any remainder with generic code */ - while (nbytes >= sizeof(tweak)) { - *(__le64 *)dst = *(__le64 *)src ^ tweak; - (*crypt_one)(&ctx->main_key, dst, dst); - *(__le64 *)dst ^= tweak; - tweak = cpu_to_le64((le64_to_cpu(tweak) << 1) ^ - ((tweak & cpu_to_le64(1ULL << 63)) ? - 0x1B : 0)); - dst += sizeof(tweak); - src += sizeof(tweak); - nbytes -= sizeof(tweak); - } - err = skcipher_walk_done(&walk, nbytes); - } - - return err; -} - -static int speck64_xts_encrypt(struct skcipher_request *req) -{ - return __speck64_xts_crypt(req, crypto_speck64_encrypt, - speck64_xts_encrypt_neon); -} - -static int speck64_xts_decrypt(struct skcipher_request *req) -{ - return __speck64_xts_crypt(req, crypto_speck64_decrypt, - speck64_xts_decrypt_neon); -} - -static int speck64_xts_setkey(struct crypto_skcipher *tfm, const u8 *key, - unsigned int keylen) -{ - struct speck64_xts_tfm_ctx *ctx = crypto_skcipher_ctx(tfm); - int err; - - err = xts_verify_key(tfm, key, keylen); - if (err) - return err; - - keylen /= 2; - - err = crypto_speck64_setkey(&ctx->main_key, key, keylen); - if (err) - return err; - - return crypto_speck64_setkey(&ctx->tweak_key, key + keylen, keylen); -} - -static struct skcipher_alg speck_algs[] = { - { - .base.cra_name = "xts(speck128)", - .base.cra_driver_name = "xts-speck128-neon", - .base.cra_priority = 300, - .base.cra_blocksize = SPECK128_BLOCK_SIZE, - .base.cra_ctxsize = sizeof(struct speck128_xts_tfm_ctx), - .base.cra_alignmask = 7, - .base.cra_module = THIS_MODULE, - .min_keysize = 2 * SPECK128_128_KEY_SIZE, - .max_keysize = 2 * SPECK128_256_KEY_SIZE, - .ivsize = SPECK128_BLOCK_SIZE, - .walksize = SPECK_NEON_CHUNK_SIZE, - .setkey = speck128_xts_setkey, - .encrypt = speck128_xts_encrypt, - .decrypt = speck128_xts_decrypt, - }, { - .base.cra_name = "xts(speck64)", - .base.cra_driver_name = "xts-speck64-neon", - .base.cra_priority = 300, - .base.cra_blocksize = SPECK64_BLOCK_SIZE, - .base.cra_ctxsize = sizeof(struct speck64_xts_tfm_ctx), - .base.cra_alignmask = 7, - .base.cra_module = THIS_MODULE, - .min_keysize = 2 * SPECK64_96_KEY_SIZE, - .max_keysize = 2 * SPECK64_128_KEY_SIZE, - .ivsize = SPECK64_BLOCK_SIZE, - .walksize = SPECK_NEON_CHUNK_SIZE, - .setkey = speck64_xts_setkey, - .encrypt = speck64_xts_encrypt, - .decrypt = speck64_xts_decrypt, - } -}; - -static int __init speck_neon_module_init(void) -{ - if (!(elf_hwcap & HWCAP_ASIMD)) - return -ENODEV; - return crypto_register_skciphers(speck_algs, ARRAY_SIZE(speck_algs)); -} - -static void __exit speck_neon_module_exit(void) -{ - crypto_unregister_skciphers(speck_algs, ARRAY_SIZE(speck_algs)); -} - -module_init(speck_neon_module_init); -module_exit(speck_neon_module_exit); - -MODULE_DESCRIPTION("Speck block cipher (NEON-accelerated)"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Eric Biggers <ebiggers@google.com>"); -MODULE_ALIAS_CRYPTO("xts(speck128)"); -MODULE_ALIAS_CRYPTO("xts-speck128-neon"); -MODULE_ALIAS_CRYPTO("xts(speck64)"); -MODULE_ALIAS_CRYPTO("xts-speck64-neon"); diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index 0bcc98dbba56..6142402c2eb4 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -286,12 +286,11 @@ alternative_endif ldr \rd, [\rn, #MM_CONTEXT_ID] .endm /* - * read_ctr - read CTR_EL0. If the system has mismatched - * cache line sizes, provide the system wide safe value - * from arm64_ftr_reg_ctrel0.sys_val + * read_ctr - read CTR_EL0. If the system has mismatched register fields, + * provide the system wide safe value from arm64_ftr_reg_ctrel0.sys_val */ .macro read_ctr, reg -alternative_if_not ARM64_MISMATCHED_CACHE_LINE_SIZE +alternative_if_not ARM64_MISMATCHED_CACHE_TYPE mrs \reg, ctr_el0 // read CTR nop alternative_else diff --git a/arch/arm64/include/asm/cache.h b/arch/arm64/include/asm/cache.h index 5ee5bca8c24b..13dd42c3ad4e 100644 --- a/arch/arm64/include/asm/cache.h +++ b/arch/arm64/include/asm/cache.h @@ -40,6 +40,15 @@ #define L1_CACHE_SHIFT (6) #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#define CLIDR_LOUU_SHIFT 27 +#define CLIDR_LOC_SHIFT 24 +#define CLIDR_LOUIS_SHIFT 21 + +#define CLIDR_LOUU(clidr) (((clidr) >> CLIDR_LOUU_SHIFT) & 0x7) +#define CLIDR_LOC(clidr) (((clidr) >> CLIDR_LOC_SHIFT) & 0x7) +#define CLIDR_LOUIS(clidr) (((clidr) >> CLIDR_LOUIS_SHIFT) & 0x7) + /* * Memory returned by kmalloc() may be used for DMA, so we must make * sure that all such allocations are cache aligned. Otherwise, @@ -84,6 +93,37 @@ static inline int cache_line_size(void) return cwg ? 4 << cwg : ARCH_DMA_MINALIGN; } +/* + * Read the effective value of CTR_EL0. + * + * According to ARM ARM for ARMv8-A (ARM DDI 0487C.a), + * section D10.2.33 "CTR_EL0, Cache Type Register" : + * + * CTR_EL0.IDC reports the data cache clean requirements for + * instruction to data coherence. + * + * 0 - dcache clean to PoU is required unless : + * (CLIDR_EL1.LoC == 0) || (CLIDR_EL1.LoUIS == 0 && CLIDR_EL1.LoUU == 0) + * 1 - dcache clean to PoU is not required for i-to-d coherence. + * + * This routine provides the CTR_EL0 with the IDC field updated to the + * effective state. + */ +static inline u32 __attribute_const__ read_cpuid_effective_cachetype(void) +{ + u32 ctr = read_cpuid_cachetype(); + + if (!(ctr & BIT(CTR_IDC_SHIFT))) { + u64 clidr = read_sysreg(clidr_el1); + + if (CLIDR_LOC(clidr) == 0 || + (CLIDR_LOUIS(clidr) == 0 && CLIDR_LOUU(clidr) == 0)) + ctr |= BIT(CTR_IDC_SHIFT); + } + + return ctr; +} + #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h index 1a037b94eba1..93ce86d5dae1 100644 --- a/arch/arm64/include/asm/compat.h +++ b/arch/arm64/include/asm/compat.h @@ -25,6 +25,8 @@ #include <linux/sched.h> #include <linux/sched/task_stack.h> +#include <asm-generic/compat.h> + #define COMPAT_USER_HZ 100 #ifdef __AARCH64EB__ #define COMPAT_UTS_MACHINE "armv8b\0\0" @@ -32,10 +34,6 @@ #define COMPAT_UTS_MACHINE "armv8l\0\0" #endif -typedef u32 compat_size_t; -typedef s32 compat_ssize_t; -typedef s32 compat_clock_t; -typedef s32 compat_pid_t; typedef u16 __compat_uid_t; typedef u16 __compat_gid_t; typedef u16 __compat_uid16_t; @@ -43,27 +41,13 @@ typedef u16 __compat_gid16_t; typedef u32 __compat_uid32_t; typedef u32 __compat_gid32_t; typedef u16 compat_mode_t; -typedef u32 compat_ino_t; typedef u32 compat_dev_t; -typedef s32 compat_off_t; -typedef s64 compat_loff_t; typedef s32 compat_nlink_t; typedef u16 compat_ipc_pid_t; -typedef s32 compat_daddr_t; typedef u32 compat_caddr_t; typedef __kernel_fsid_t compat_fsid_t; -typedef s32 compat_key_t; -typedef s32 compat_timer_t; - -typedef s16 compat_short_t; -typedef s32 compat_int_t; -typedef s32 compat_long_t; typedef s64 compat_s64; -typedef u16 compat_ushort_t; -typedef u32 compat_uint_t; -typedef u32 compat_ulong_t; typedef u64 compat_u64; -typedef u32 compat_uptr_t; struct compat_stat { #ifdef __AARCH64EB__ @@ -86,11 +70,11 @@ struct compat_stat { compat_off_t st_size; compat_off_t st_blksize; compat_off_t st_blocks; - compat_time_t st_atime; + old_time32_t st_atime; compat_ulong_t st_atime_nsec; - compat_time_t st_mtime; + old_time32_t st_mtime; compat_ulong_t st_mtime_nsec; - compat_time_t st_ctime; + old_time32_t st_ctime; compat_ulong_t st_ctime_nsec; compat_ulong_t __unused4[2]; }; @@ -159,6 +143,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr) } #define compat_user_stack_pointer() (user_stack_pointer(task_pt_regs(current))) +#define COMPAT_MINSIGSTKSZ 2048 static inline void __user *arch_compat_alloc_user_space(long len) { diff --git a/arch/arm64/include/asm/compiler.h b/arch/arm64/include/asm/compiler.h deleted file mode 100644 index ee35fd0f2236..000000000000 --- a/arch/arm64/include/asm/compiler.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Based on arch/arm/include/asm/compiler.h - * - * Copyright (C) 2012 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#ifndef __ASM_COMPILER_H -#define __ASM_COMPILER_H - -/* - * This is used to ensure the compiler did actually allocate the register we - * asked it for some inline assembly sequences. Apparently we can't trust the - * compiler from one version to another so a bit of paranoia won't hurt. This - * string is meant to be concatenated with the inline asm string and will - * cause compilation to stop on mismatch. (for details, see gcc PR 15089) - */ -#define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t" - -#endif /* __ASM_COMPILER_H */ diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h index ae1f70450fb2..6e2d254c09eb 100644 --- a/arch/arm64/include/asm/cpucaps.h +++ b/arch/arm64/include/asm/cpucaps.h @@ -33,7 +33,7 @@ #define ARM64_WORKAROUND_CAVIUM_27456 12 #define ARM64_HAS_32BIT_EL0 13 #define ARM64_HARDEN_EL2_VECTORS 14 -#define ARM64_MISMATCHED_CACHE_LINE_SIZE 15 +#define ARM64_HAS_CNP 15 #define ARM64_HAS_NO_FPSIMD 16 #define ARM64_WORKAROUND_REPEAT_TLBI 17 #define ARM64_WORKAROUND_QCOM_FALKOR_E1003 18 @@ -51,7 +51,10 @@ #define ARM64_SSBD 30 #define ARM64_MISMATCHED_CACHE_TYPE 31 #define ARM64_HAS_STAGE2_FWB 32 +#define ARM64_HAS_CRC32 33 +#define ARM64_SSBS 34 +#define ARM64_WORKAROUND_1188873 35 -#define ARM64_NCAPS 33 +#define ARM64_NCAPS 36 #endif /* __ASM_CPUCAPS_H */ diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h index 1717ba1db35d..7e2ec64aa414 100644 --- a/arch/arm64/include/asm/cpufeature.h +++ b/arch/arm64/include/asm/cpufeature.h @@ -262,7 +262,7 @@ extern struct arm64_ftr_reg arm64_ftr_reg_ctrel0; /* * CPU feature detected at boot time based on system-wide value of a * feature. It is safe for a late CPU to have this feature even though - * the system hasn't enabled it, although the featuer will not be used + * the system hasn't enabled it, although the feature will not be used * by Linux in this case. If the system has enabled this feature already, * then every late CPU must have it. */ @@ -508,6 +508,12 @@ static inline bool system_supports_sve(void) cpus_have_const_cap(ARM64_SVE); } +static inline bool system_supports_cnp(void) +{ + return IS_ENABLED(CONFIG_ARM64_CNP) && + cpus_have_const_cap(ARM64_HAS_CNP); +} + #define ARM64_SSBD_UNKNOWN -1 #define ARM64_SSBD_FORCE_DISABLE 0 #define ARM64_SSBD_KERNEL 1 @@ -530,6 +536,28 @@ void arm64_set_ssbd_mitigation(bool state); static inline void arm64_set_ssbd_mitigation(bool state) {} #endif +extern int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt); + +static inline u32 id_aa64mmfr0_parange_to_phys_shift(int parange) +{ + switch (parange) { + case 0: return 32; + case 1: return 36; + case 2: return 40; + case 3: return 42; + case 4: return 44; + case 5: return 48; + case 6: return 52; + /* + * A future PE could use a value unknown to the kernel. + * However, by the "D10.1.4 Principles of the ID scheme + * for fields in ID registers", ARM DDI 0487C.a, any new + * value is guaranteed to be higher than what we know already. + * As a safe limit, we return the limit supported by the kernel. + */ + default: return CONFIG_ARM64_PA_BITS; + } +} #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index ea690b3562af..12f93e4d2452 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -86,6 +86,7 @@ #define ARM_CPU_PART_CORTEX_A75 0xD0A #define ARM_CPU_PART_CORTEX_A35 0xD04 #define ARM_CPU_PART_CORTEX_A55 0xD05 +#define ARM_CPU_PART_CORTEX_A76 0xD0B #define APM_CPU_PART_POTENZA 0x000 @@ -110,6 +111,7 @@ #define MIDR_CORTEX_A75 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A75) #define MIDR_CORTEX_A35 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A35) #define MIDR_CORTEX_A55 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A55) +#define MIDR_CORTEX_A76 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A76) #define MIDR_THUNDERX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX) #define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX) #define MIDR_THUNDERX_83XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_83XX) diff --git a/arch/arm64/include/asm/daifflags.h b/arch/arm64/include/asm/daifflags.h index 22e4c83de5a5..8d91f2233135 100644 --- a/arch/arm64/include/asm/daifflags.h +++ b/arch/arm64/include/asm/daifflags.h @@ -36,11 +36,8 @@ static inline unsigned long local_daif_save(void) { unsigned long flags; - asm volatile( - "mrs %0, daif // local_daif_save\n" - : "=r" (flags) - : - : "memory"); + flags = arch_local_save_flags(); + local_daif_mask(); return flags; @@ -60,11 +57,9 @@ static inline void local_daif_restore(unsigned long flags) { if (!arch_irqs_disabled_flags(flags)) trace_hardirqs_on(); - asm volatile( - "msr daif, %0 // local_daif_restore" - : - : "r" (flags) - : "memory"); + + arch_local_irq_restore(flags); + if (arch_irqs_disabled_flags(flags)) trace_hardirqs_off(); } diff --git a/arch/arm64/include/asm/device.h b/arch/arm64/include/asm/device.h index 5a5fa47a6b18..3dd3d664c5c5 100644 --- a/arch/arm64/include/asm/device.h +++ b/arch/arm64/include/asm/device.h @@ -23,7 +23,6 @@ struct dev_archdata { #ifdef CONFIG_XEN const struct dma_map_ops *dev_dma_ops; #endif - bool dma_coherent; }; struct pdev_archdata { diff --git a/arch/arm64/include/asm/dma-mapping.h b/arch/arm64/include/asm/dma-mapping.h index b7847eb8a7bb..c41f3fb1446c 100644 --- a/arch/arm64/include/asm/dma-mapping.h +++ b/arch/arm64/include/asm/dma-mapping.h @@ -44,10 +44,13 @@ void arch_teardown_dma_ops(struct device *dev); #define arch_teardown_dma_ops arch_teardown_dma_ops #endif -/* do not use this function in a driver */ +/* + * Do not use this function in a driver, it is only provided for + * arch/arm/mm/xen.c, which is used by arm64 as well. + */ static inline bool is_device_dma_coherent(struct device *dev) { - return dev->archdata.dma_coherent; + return dev->dma_coherent; } #endif /* __KERNEL__ */ diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h index ce70c3ffb993..676de2ec1762 100644 --- a/arch/arm64/include/asm/esr.h +++ b/arch/arm64/include/asm/esr.h @@ -137,6 +137,8 @@ #define ESR_ELx_CV (UL(1) << 24) #define ESR_ELx_COND_SHIFT (20) #define ESR_ELx_COND_MASK (UL(0xF) << ESR_ELx_COND_SHIFT) +#define ESR_ELx_WFx_ISS_TI (UL(1) << 0) +#define ESR_ELx_WFx_ISS_WFI (UL(0) << 0) #define ESR_ELx_WFx_ISS_WFE (UL(1) << 0) #define ESR_ELx_xVC_IMM_MASK ((1UL << 16) - 1) @@ -148,6 +150,9 @@ #define DISR_EL1_ESR_MASK (ESR_ELx_AET | ESR_ELx_EA | ESR_ELx_FSC) /* ESR value templates for specific events */ +#define ESR_ELx_WFx_MASK (ESR_ELx_EC_MASK | ESR_ELx_WFx_ISS_TI) +#define ESR_ELx_WFx_WFI_VAL ((ESR_ELx_EC_WFx << ESR_ELx_EC_SHIFT) | \ + ESR_ELx_WFx_ISS_WFI) /* BRK instruction trap from AArch64 state */ #define ESR_ELx_VAL_BRK64(imm) \ @@ -187,6 +192,8 @@ #define ESR_ELx_SYS64_ISS_SYS_OP_MASK (ESR_ELx_SYS64_ISS_SYS_MASK | \ ESR_ELx_SYS64_ISS_DIR_MASK) +#define ESR_ELx_SYS64_ISS_RT(esr) \ + (((esr) & ESR_ELx_SYS64_ISS_RT_MASK) >> ESR_ELx_SYS64_ISS_RT_SHIFT) /* * User space cache operations have the following sysreg encoding * in System instructions. @@ -206,6 +213,18 @@ #define ESR_ELx_SYS64_ISS_EL0_CACHE_OP_VAL \ (ESR_ELx_SYS64_ISS_SYS_VAL(1, 3, 1, 7, 0) | \ ESR_ELx_SYS64_ISS_DIR_WRITE) +/* + * User space MRS operations which are supported for emulation + * have the following sysreg encoding in System instructions. + * op0 = 3, op1= 0, crn = 0, {crm = 0, 4-7}, READ (L = 1) + */ +#define ESR_ELx_SYS64_ISS_SYS_MRS_OP_MASK (ESR_ELx_SYS64_ISS_OP0_MASK | \ + ESR_ELx_SYS64_ISS_OP1_MASK | \ + ESR_ELx_SYS64_ISS_CRN_MASK | \ + ESR_ELx_SYS64_ISS_DIR_MASK) +#define ESR_ELx_SYS64_ISS_SYS_MRS_OP_VAL \ + (ESR_ELx_SYS64_ISS_SYS_VAL(3, 0, 0, 0, 0) | \ + ESR_ELx_SYS64_ISS_DIR_READ) #define ESR_ELx_SYS64_ISS_SYS_CTR ESR_ELx_SYS64_ISS_SYS_VAL(3, 3, 1, 0, 0) #define ESR_ELx_SYS64_ISS_SYS_CTR_READ (ESR_ELx_SYS64_ISS_SYS_CTR | \ @@ -249,6 +268,64 @@ #define ESR_ELx_FP_EXC_TFV (UL(1) << 23) +/* + * ISS field definitions for CP15 accesses + */ +#define ESR_ELx_CP15_32_ISS_DIR_MASK 0x1 +#define ESR_ELx_CP15_32_ISS_DIR_READ 0x1 +#define ESR_ELx_CP15_32_ISS_DIR_WRITE 0x0 + +#define ESR_ELx_CP15_32_ISS_RT_SHIFT 5 +#define ESR_ELx_CP15_32_ISS_RT_MASK (UL(0x1f) << ESR_ELx_CP15_32_ISS_RT_SHIFT) +#define ESR_ELx_CP15_32_ISS_CRM_SHIFT 1 +#define ESR_ELx_CP15_32_ISS_CRM_MASK (UL(0xf) << ESR_ELx_CP15_32_ISS_CRM_SHIFT) +#define ESR_ELx_CP15_32_ISS_CRN_SHIFT 10 +#define ESR_ELx_CP15_32_ISS_CRN_MASK (UL(0xf) << ESR_ELx_CP15_32_ISS_CRN_SHIFT) +#define ESR_ELx_CP15_32_ISS_OP1_SHIFT 14 +#define ESR_ELx_CP15_32_ISS_OP1_MASK (UL(0x7) << ESR_ELx_CP15_32_ISS_OP1_SHIFT) +#define ESR_ELx_CP15_32_ISS_OP2_SHIFT 17 +#define ESR_ELx_CP15_32_ISS_OP2_MASK (UL(0x7) << ESR_ELx_CP15_32_ISS_OP2_SHIFT) + +#define ESR_ELx_CP15_32_ISS_SYS_MASK (ESR_ELx_CP15_32_ISS_OP1_MASK | \ + ESR_ELx_CP15_32_ISS_OP2_MASK | \ + ESR_ELx_CP15_32_ISS_CRN_MASK | \ + ESR_ELx_CP15_32_ISS_CRM_MASK | \ + ESR_ELx_CP15_32_ISS_DIR_MASK) +#define ESR_ELx_CP15_32_ISS_SYS_VAL(op1, op2, crn, crm) \ + (((op1) << ESR_ELx_CP15_32_ISS_OP1_SHIFT) | \ + ((op2) << ESR_ELx_CP15_32_ISS_OP2_SHIFT) | \ + ((crn) << ESR_ELx_CP15_32_ISS_CRN_SHIFT) | \ + ((crm) << ESR_ELx_CP15_32_ISS_CRM_SHIFT)) + +#define ESR_ELx_CP15_64_ISS_DIR_MASK 0x1 +#define ESR_ELx_CP15_64_ISS_DIR_READ 0x1 +#define ESR_ELx_CP15_64_ISS_DIR_WRITE 0x0 + +#define ESR_ELx_CP15_64_ISS_RT_SHIFT 5 +#define ESR_ELx_CP15_64_ISS_RT_MASK (UL(0x1f) << ESR_ELx_CP15_64_ISS_RT_SHIFT) + +#define ESR_ELx_CP15_64_ISS_RT2_SHIFT 10 +#define ESR_ELx_CP15_64_ISS_RT2_MASK (UL(0x1f) << ESR_ELx_CP15_64_ISS_RT2_SHIFT) + +#define ESR_ELx_CP15_64_ISS_OP1_SHIFT 16 +#define ESR_ELx_CP15_64_ISS_OP1_MASK (UL(0xf) << ESR_ELx_CP15_64_ISS_OP1_SHIFT) +#define ESR_ELx_CP15_64_ISS_CRM_SHIFT 1 +#define ESR_ELx_CP15_64_ISS_CRM_MASK (UL(0xf) << ESR_ELx_CP15_64_ISS_CRM_SHIFT) + +#define ESR_ELx_CP15_64_ISS_SYS_VAL(op1, crm) \ + (((op1) << ESR_ELx_CP15_64_ISS_OP1_SHIFT) | \ + ((crm) << ESR_ELx_CP15_64_ISS_CRM_SHIFT)) + +#define ESR_ELx_CP15_64_ISS_SYS_MASK (ESR_ELx_CP15_64_ISS_OP1_MASK | \ + ESR_ELx_CP15_64_ISS_CRM_MASK | \ + ESR_ELx_CP15_64_ISS_DIR_MASK) + +#define ESR_ELx_CP15_64_ISS_SYS_CNTVCT (ESR_ELx_CP15_64_ISS_SYS_VAL(1, 14) | \ + ESR_ELx_CP15_64_ISS_DIR_READ) + +#define ESR_ELx_CP15_32_ISS_SYS_CNTFRQ (ESR_ELx_CP15_32_ISS_SYS_VAL(0, 0, 14, 0) |\ + ESR_ELx_CP15_32_ISS_DIR_READ) + #ifndef __ASSEMBLY__ #include <asm/types.h> diff --git a/arch/arm64/include/asm/hugetlb.h b/arch/arm64/include/asm/hugetlb.h index e73f68569624..fb6609875455 100644 --- a/arch/arm64/include/asm/hugetlb.h +++ b/arch/arm64/include/asm/hugetlb.h @@ -20,48 +20,18 @@ #include <asm/page.h> +#define __HAVE_ARCH_HUGE_PTEP_GET static inline pte_t huge_ptep_get(pte_t *ptep) { return READ_ONCE(*ptep); } - - -static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb, - unsigned long addr, unsigned long end, - unsigned long floor, - unsigned long ceiling) -{ - free_pgd_range(tlb, addr, end, floor, ceiling); -} - static inline int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr, unsigned long len) { return 0; } -static inline int prepare_hugepage_range(struct file *file, - unsigned long addr, unsigned long len) -{ - struct hstate *h = hstate_file(file); - if (len & ~huge_page_mask(h)) - return -EINVAL; - if (addr & ~huge_page_mask(h)) - return -EINVAL; - return 0; -} - -static inline int huge_pte_none(pte_t pte) -{ - return pte_none(pte); -} - -static inline pte_t huge_pte_wrprotect(pte_t pte) -{ - return pte_wrprotect(pte); -} - static inline void arch_clear_hugepage_flags(struct page *page) { clear_bit(PG_dcache_clean, &page->flags); @@ -70,20 +40,25 @@ static inline void arch_clear_hugepage_flags(struct page *page) extern pte_t arch_make_huge_pte(pte_t entry, struct vm_area_struct *vma, struct page *page, int writable); #define arch_make_huge_pte arch_make_huge_pte +#define __HAVE_ARCH_HUGE_SET_HUGE_PTE_AT extern void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte); +#define __HAVE_ARCH_HUGE_PTEP_SET_ACCESS_FLAGS extern int huge_ptep_set_access_flags(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep, pte_t pte, int dirty); +#define __HAVE_ARCH_HUGE_PTEP_GET_AND_CLEAR extern pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); +#define __HAVE_ARCH_HUGE_PTEP_SET_WRPROTECT extern void huge_ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep); +#define __HAVE_ARCH_HUGE_PTEP_CLEAR_FLUSH extern void huge_ptep_clear_flush(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep); +#define __HAVE_ARCH_HUGE_PTE_CLEAR extern void huge_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep, unsigned long sz); -#define huge_pte_clear huge_pte_clear extern void set_huge_swap_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte, unsigned long sz); #define set_huge_swap_pte_at set_huge_swap_pte_at diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h index 35b2e50f17fb..9f8b915af3a7 100644 --- a/arch/arm64/include/asm/io.h +++ b/arch/arm64/include/asm/io.h @@ -31,8 +31,6 @@ #include <asm/alternative.h> #include <asm/cpufeature.h> -#include <xen/xen.h> - /* * Generic IO read/write. These perform native-endian accesses. */ @@ -205,12 +203,5 @@ extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); extern int devmem_is_allowed(unsigned long pfn); -struct bio_vec; -extern bool xen_biovec_phys_mergeable(const struct bio_vec *vec1, - const struct bio_vec *vec2); -#define BIOVEC_PHYS_MERGEABLE(vec1, vec2) \ - (__BIOVEC_PHYS_MERGEABLE(vec1, vec2) && \ - (!xen_domain() || xen_biovec_phys_mergeable(vec1, vec2))) - #endif /* __KERNEL__ */ #endif /* __ASM_IO_H */ diff --git a/arch/arm64/include/asm/jump_label.h b/arch/arm64/include/asm/jump_label.h index 1b5e0e843c3a..472023498d71 100644 --- a/arch/arm64/include/asm/jump_label.h +++ b/arch/arm64/include/asm/jump_label.h @@ -26,13 +26,16 @@ #define JUMP_LABEL_NOP_SIZE AARCH64_INSN_SIZE -static __always_inline bool arch_static_branch(struct static_key *key, bool branch) +static __always_inline bool arch_static_branch(struct static_key *key, + bool branch) { - asm goto("1: nop\n\t" - ".pushsection __jump_table, \"aw\"\n\t" - ".align 3\n\t" - ".quad 1b, %l[l_yes], %c0\n\t" - ".popsection\n\t" + asm_volatile_goto( + "1: nop \n\t" + " .pushsection __jump_table, \"aw\" \n\t" + " .align 3 \n\t" + " .long 1b - ., %l[l_yes] - . \n\t" + " .quad %c0 - . \n\t" + " .popsection \n\t" : : "i"(&((char *)key)[branch]) : : l_yes); return false; @@ -40,13 +43,16 @@ l_yes: return true; } -static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch) +static __always_inline bool arch_static_branch_jump(struct static_key *key, + bool branch) { - asm goto("1: b %l[l_yes]\n\t" - ".pushsection __jump_table, \"aw\"\n\t" - ".align 3\n\t" - ".quad 1b, %l[l_yes], %c0\n\t" - ".popsection\n\t" + asm_volatile_goto( + "1: b %l[l_yes] \n\t" + " .pushsection __jump_table, \"aw\" \n\t" + " .align 3 \n\t" + " .long 1b - ., %l[l_yes] - . \n\t" + " .quad %c0 - . \n\t" + " .popsection \n\t" : : "i"(&((char *)key)[branch]) : : l_yes); return false; @@ -54,13 +60,5 @@ l_yes: return true; } -typedef u64 jump_label_t; - -struct jump_entry { - jump_label_t code; - jump_label_t target; - jump_label_t key; -}; - #endif /* __ASSEMBLY__ */ #endif /* __ASM_JUMP_LABEL_H */ diff --git a/arch/arm64/include/asm/kernel-pgtable.h b/arch/arm64/include/asm/kernel-pgtable.h index a780f6714b44..850e2122d53f 100644 --- a/arch/arm64/include/asm/kernel-pgtable.h +++ b/arch/arm64/include/asm/kernel-pgtable.h @@ -97,7 +97,7 @@ + EARLY_PGDS((vstart), (vend)) /* each PGDIR needs a next level page table */ \ + EARLY_PUDS((vstart), (vend)) /* each PUD needs a next level page table */ \ + EARLY_PMDS((vstart), (vend))) /* each PMD needs a next level page table */ -#define SWAPPER_DIR_SIZE (PAGE_SIZE * EARLY_PAGES(KIMAGE_VADDR + TEXT_OFFSET, _end)) +#define INIT_DIR_SIZE (PAGE_SIZE * EARLY_PAGES(KIMAGE_VADDR + TEXT_OFFSET, _end)) #define IDMAP_DIR_SIZE (IDMAP_PGTABLE_LEVELS * PAGE_SIZE) #ifdef CONFIG_ARM64_SW_TTBR0_PAN diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h index aa45df752a16..6f602af5263c 100644 --- a/arch/arm64/include/asm/kvm_arm.h +++ b/arch/arm64/include/asm/kvm_arm.h @@ -107,6 +107,7 @@ #define VTCR_EL2_RES1 (1 << 31) #define VTCR_EL2_HD (1 << 22) #define VTCR_EL2_HA (1 << 21) +#define VTCR_EL2_PS_SHIFT TCR_EL2_PS_SHIFT #define VTCR_EL2_PS_MASK TCR_EL2_PS_MASK #define VTCR_EL2_TG0_MASK TCR_TG0_MASK #define VTCR_EL2_TG0_4K TCR_TG0_4K @@ -120,62 +121,150 @@ #define VTCR_EL2_IRGN0_WBWA TCR_IRGN0_WBWA #define VTCR_EL2_SL0_SHIFT 6 #define VTCR_EL2_SL0_MASK (3 << VTCR_EL2_SL0_SHIFT) -#define VTCR_EL2_SL0_LVL1 (1 << VTCR_EL2_SL0_SHIFT) #define VTCR_EL2_T0SZ_MASK 0x3f -#define VTCR_EL2_T0SZ_40B 24 #define VTCR_EL2_VS_SHIFT 19 #define VTCR_EL2_VS_8BIT (0 << VTCR_EL2_VS_SHIFT) #define VTCR_EL2_VS_16BIT (1 << VTCR_EL2_VS_SHIFT) +#define VTCR_EL2_T0SZ(x) TCR_T0SZ(x) + /* * We configure the Stage-2 page tables to always restrict the IPA space to be * 40 bits wide (T0SZ = 24). Systems with a PARange smaller than 40 bits are * not known to exist and will break with this configuration. * - * VTCR_EL2.PS is extracted from ID_AA64MMFR0_EL1.PARange at boot time - * (see hyp-init.S). + * The VTCR_EL2 is configured per VM and is initialised in kvm_arm_setup_stage2(). * * Note that when using 4K pages, we concatenate two first level page tables * together. With 16K pages, we concatenate 16 first level page tables. * - * The magic numbers used for VTTBR_X in this patch can be found in Tables - * D4-23 and D4-25 in ARM DDI 0487A.b. */ -#define VTCR_EL2_T0SZ_IPA VTCR_EL2_T0SZ_40B #define VTCR_EL2_COMMON_BITS (VTCR_EL2_SH0_INNER | VTCR_EL2_ORGN0_WBWA | \ VTCR_EL2_IRGN0_WBWA | VTCR_EL2_RES1) -#ifdef CONFIG_ARM64_64K_PAGES /* - * Stage2 translation configuration: - * 64kB pages (TG0 = 1) - * 2 level page tables (SL = 1) + * VTCR_EL2:SL0 indicates the entry level for Stage2 translation. + * Interestingly, it depends on the page size. + * See D.10.2.121, VTCR_EL2, in ARM DDI 0487C.a + * + * ----------------------------------------- + * | Entry level | 4K | 16K/64K | + * ------------------------------------------ + * | Level: 0 | 2 | - | + * ------------------------------------------ + * | Level: 1 | 1 | 2 | + * ------------------------------------------ + * | Level: 2 | 0 | 1 | + * ------------------------------------------ + * | Level: 3 | - | 0 | + * ------------------------------------------ + * + * The table roughly translates to : + * + * SL0(PAGE_SIZE, Entry_level) = TGRAN_SL0_BASE - Entry_Level + * + * Where TGRAN_SL0_BASE is a magic number depending on the page size: + * TGRAN_SL0_BASE(4K) = 2 + * TGRAN_SL0_BASE(16K) = 3 + * TGRAN_SL0_BASE(64K) = 3 + * provided we take care of ruling out the unsupported cases and + * Entry_Level = 4 - Number_of_levels. + * */ -#define VTCR_EL2_TGRAN_FLAGS (VTCR_EL2_TG0_64K | VTCR_EL2_SL0_LVL1) -#define VTTBR_X_TGRAN_MAGIC 38 +#ifdef CONFIG_ARM64_64K_PAGES + +#define VTCR_EL2_TGRAN VTCR_EL2_TG0_64K +#define VTCR_EL2_TGRAN_SL0_BASE 3UL + #elif defined(CONFIG_ARM64_16K_PAGES) -/* - * Stage2 translation configuration: - * 16kB pages (TG0 = 2) - * 2 level page tables (SL = 1) - */ -#define VTCR_EL2_TGRAN_FLAGS (VTCR_EL2_TG0_16K | VTCR_EL2_SL0_LVL1) -#define VTTBR_X_TGRAN_MAGIC 42 + +#define VTCR_EL2_TGRAN VTCR_EL2_TG0_16K +#define VTCR_EL2_TGRAN_SL0_BASE 3UL + #else /* 4K */ -/* - * Stage2 translation configuration: - * 4kB pages (TG0 = 0) - * 3 level page tables (SL = 1) - */ -#define VTCR_EL2_TGRAN_FLAGS (VTCR_EL2_TG0_4K | VTCR_EL2_SL0_LVL1) -#define VTTBR_X_TGRAN_MAGIC 37 + +#define VTCR_EL2_TGRAN VTCR_EL2_TG0_4K +#define VTCR_EL2_TGRAN_SL0_BASE 2UL + #endif -#define VTCR_EL2_FLAGS (VTCR_EL2_COMMON_BITS | VTCR_EL2_TGRAN_FLAGS) -#define VTTBR_X (VTTBR_X_TGRAN_MAGIC - VTCR_EL2_T0SZ_IPA) +#define VTCR_EL2_LVLS_TO_SL0(levels) \ + ((VTCR_EL2_TGRAN_SL0_BASE - (4 - (levels))) << VTCR_EL2_SL0_SHIFT) +#define VTCR_EL2_SL0_TO_LVLS(sl0) \ + ((sl0) + 4 - VTCR_EL2_TGRAN_SL0_BASE) +#define VTCR_EL2_LVLS(vtcr) \ + VTCR_EL2_SL0_TO_LVLS(((vtcr) & VTCR_EL2_SL0_MASK) >> VTCR_EL2_SL0_SHIFT) -#define VTTBR_BADDR_MASK (((UL(1) << (PHYS_MASK_SHIFT - VTTBR_X)) - 1) << VTTBR_X) +#define VTCR_EL2_FLAGS (VTCR_EL2_COMMON_BITS | VTCR_EL2_TGRAN) +#define VTCR_EL2_IPA(vtcr) (64 - ((vtcr) & VTCR_EL2_T0SZ_MASK)) + +/* + * ARM VMSAv8-64 defines an algorithm for finding the translation table + * descriptors in section D4.2.8 in ARM DDI 0487C.a. + * + * The algorithm defines the expectations on the translation table + * addresses for each level, based on PAGE_SIZE, entry level + * and the translation table size (T0SZ). The variable "x" in the + * algorithm determines the alignment of a table base address at a given + * level and thus determines the alignment of VTTBR:BADDR for stage2 + * page table entry level. + * Since the number of bits resolved at the entry level could vary + * depending on the T0SZ, the value of "x" is defined based on a + * Magic constant for a given PAGE_SIZE and Entry Level. The + * intermediate levels must be always aligned to the PAGE_SIZE (i.e, + * x = PAGE_SHIFT). + * + * The value of "x" for entry level is calculated as : + * x = Magic_N - T0SZ + * + * where Magic_N is an integer depending on the page size and the entry + * level of the page table as below: + * + * -------------------------------------------- + * | Entry level | 4K 16K 64K | + * -------------------------------------------- + * | Level: 0 (4 levels) | 28 | - | - | + * -------------------------------------------- + * | Level: 1 (3 levels) | 37 | 31 | 25 | + * -------------------------------------------- + * | Level: 2 (2 levels) | 46 | 42 | 38 | + * -------------------------------------------- + * | Level: 3 (1 level) | - | 53 | 51 | + * -------------------------------------------- + * + * We have a magic formula for the Magic_N below: + * + * Magic_N(PAGE_SIZE, Level) = 64 - ((PAGE_SHIFT - 3) * Number_of_levels) + * + * where Number_of_levels = (4 - Level). We are only interested in the + * value for Entry_Level for the stage2 page table. + * + * So, given that T0SZ = (64 - IPA_SHIFT), we can compute 'x' as follows: + * + * x = (64 - ((PAGE_SHIFT - 3) * Number_of_levels)) - (64 - IPA_SHIFT) + * = IPA_SHIFT - ((PAGE_SHIFT - 3) * Number of levels) + * + * Here is one way to explain the Magic Formula: + * + * x = log2(Size_of_Entry_Level_Table) + * + * Since, we can resolve (PAGE_SHIFT - 3) bits at each level, and another + * PAGE_SHIFT bits in the PTE, we have : + * + * Bits_Entry_level = IPA_SHIFT - ((PAGE_SHIFT - 3) * (n - 1) + PAGE_SHIFT) + * = IPA_SHIFT - (PAGE_SHIFT - 3) * n - 3 + * where n = number of levels, and since each pointer is 8bytes, we have: + * + * x = Bits_Entry_Level + 3 + * = IPA_SHIFT - (PAGE_SHIFT - 3) * n + * + * The only constraint here is that, we have to find the number of page table + * levels for a given IPA size (which we do, see stage2_pt_levels()) + */ +#define ARM64_VTTBR_X(ipa, levels) ((ipa) - ((levels) * (PAGE_SHIFT - 3))) + +#define VTTBR_CNP_BIT (UL(1)) #define VTTBR_VMID_SHIFT (UL(48)) #define VTTBR_VMID_MASK(size) (_AT(u64, (1 << size) - 1) << VTTBR_VMID_SHIFT) @@ -223,6 +312,13 @@ /* Hyp Prefetch Fault Address Register (HPFAR/HDFAR) */ #define HPFAR_MASK (~UL(0xf)) +/* + * We have + * PAR [PA_Shift - 1 : 12] = PA [PA_Shift - 1 : 12] + * HPFAR [PA_Shift - 9 : 4] = FIPA [PA_Shift - 1 : 12] + */ +#define PAR_TO_HPFAR(par) \ + (((par) & GENMASK_ULL(PHYS_MASK_SHIFT - 1, 12)) >> 8) #define kvm_arm_exception_type \ {0, "IRQ" }, \ diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h index 102b5a5c47b6..aea01a09eb94 100644 --- a/arch/arm64/include/asm/kvm_asm.h +++ b/arch/arm64/include/asm/kvm_asm.h @@ -30,6 +30,7 @@ #define ARM_EXCEPTION_IRQ 0 #define ARM_EXCEPTION_EL1_SERROR 1 #define ARM_EXCEPTION_TRAP 2 +#define ARM_EXCEPTION_IL 3 /* The hyp-stub will return this for any kvm_call_hyp() call */ #define ARM_EXCEPTION_HYP_GONE HVC_STUB_ERR @@ -72,8 +73,6 @@ extern void __vgic_v3_init_lrs(void); extern u32 __kvm_get_mdcr_el2(void); -extern u32 __init_stage2_translation(void); - /* Home-grown __this_cpu_{ptr,read} variants that always work at HYP */ #define __hyp_this_cpu_ptr(sym) \ ({ \ diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h index 6106a85ae0be..21247870def7 100644 --- a/arch/arm64/include/asm/kvm_emulate.h +++ b/arch/arm64/include/asm/kvm_emulate.h @@ -335,7 +335,7 @@ static inline bool kvm_vcpu_dabt_isextabt(const struct kvm_vcpu *vcpu) static inline int kvm_vcpu_sys_get_rt(struct kvm_vcpu *vcpu) { u32 esr = kvm_vcpu_get_hsr(vcpu); - return (esr & ESR_ELx_SYS64_ISS_RT_MASK) >> ESR_ELx_SYS64_ISS_RT_SHIFT; + return ESR_ELx_SYS64_ISS_RT(esr); } static inline unsigned long kvm_vcpu_get_mpidr_aff(struct kvm_vcpu *vcpu) diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index f26055f2306e..52fbc823ff8c 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -53,7 +53,7 @@ DECLARE_STATIC_KEY_FALSE(userspace_irqchip_in_use); int __attribute_const__ kvm_target_cpu(void); int kvm_reset_vcpu(struct kvm_vcpu *vcpu); -int kvm_arch_dev_ioctl_check_extension(struct kvm *kvm, long ext); +int kvm_arch_vm_ioctl_check_extension(struct kvm *kvm, long ext); void __extended_idmap_trampoline(phys_addr_t boot_pgd, phys_addr_t idmap_start); struct kvm_arch { @@ -61,12 +61,13 @@ struct kvm_arch { u64 vmid_gen; u32 vmid; - /* 1-level 2nd stage table and lock */ - spinlock_t pgd_lock; + /* stage2 entry level table */ pgd_t *pgd; /* VTTBR value associated with above pgd and vmid */ u64 vttbr; + /* VTCR_EL2 value for this VM */ + u64 vtcr; /* The last vcpu id that ran on each physical CPU */ int __percpu *last_vcpu_ran; @@ -357,7 +358,6 @@ int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu, struct kvm_vcpu_events *events); #define KVM_ARCH_WANT_MMU_NOTIFIER -int kvm_unmap_hva(struct kvm *kvm, unsigned long hva); int kvm_unmap_hva_range(struct kvm *kvm, unsigned long start, unsigned long end); void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte); @@ -389,6 +389,8 @@ struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr); DECLARE_PER_CPU(kvm_cpu_context_t, kvm_host_cpu_state); +void __kvm_enable_ssbs(void); + static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr, unsigned long hyp_stack_ptr, unsigned long vector_ptr) @@ -409,6 +411,15 @@ static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr, */ BUG_ON(!static_branch_likely(&arm64_const_caps_ready)); __kvm_call_hyp((void *)pgd_ptr, hyp_stack_ptr, vector_ptr, tpidr_el2); + + /* + * Disabling SSBD on a non-VHE system requires us to enable SSBS + * at EL2. + */ + if (!has_vhe() && this_cpu_has_cap(ARM64_SSBS) && + arm64_get_ssbd_state() == ARM64_SSBD_FORCE_DISABLE) { + kvm_call_hyp(__kvm_enable_ssbs); + } } static inline bool kvm_arch_check_sve_has_vhe(void) @@ -442,13 +453,7 @@ int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu, int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr); -static inline void __cpu_init_stage2(void) -{ - u32 parange = kvm_call_hyp(__init_stage2_translation); - - WARN_ONCE(parange < 40, - "PARange is %d bits, unsupported configuration!", parange); -} +static inline void __cpu_init_stage2(void) {} /* Guest/host FPSIMD coordination helpers */ int kvm_arch_vcpu_run_map_fp(struct kvm_vcpu *vcpu); @@ -511,8 +516,12 @@ static inline int kvm_arm_have_ssbd(void) void kvm_vcpu_load_sysregs(struct kvm_vcpu *vcpu); void kvm_vcpu_put_sysregs(struct kvm_vcpu *vcpu); +void kvm_set_ipa_limit(void); + #define __KVM_HAVE_ARCH_VM_ALLOC struct kvm *kvm_arch_alloc_vm(void); void kvm_arch_free_vm(struct kvm *kvm); +int kvm_arm_setup_stage2(struct kvm *kvm, unsigned long type); + #endif /* __ARM64_KVM_HOST_H__ */ diff --git a/arch/arm64/include/asm/kvm_hyp.h b/arch/arm64/include/asm/kvm_hyp.h index 384c34397619..23aca66767f9 100644 --- a/arch/arm64/include/asm/kvm_hyp.h +++ b/arch/arm64/include/asm/kvm_hyp.h @@ -155,5 +155,15 @@ void deactivate_traps_vhe_put(void); u64 __guest_enter(struct kvm_vcpu *vcpu, struct kvm_cpu_context *host_ctxt); void __noreturn __hyp_do_panic(unsigned long, ...); +/* + * Must be called from hyp code running at EL2 with an updated VTTBR + * and interrupts disabled. + */ +static __always_inline void __hyp_text __load_guest_stage2(struct kvm *kvm) +{ + write_sysreg(kvm->arch.vtcr, vtcr_el2); + write_sysreg(kvm->arch.vttbr, vttbr_el2); +} + #endif /* __ARM64_KVM_HYP_H__ */ diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h index d6fff7de5539..658657367f2f 100644 --- a/arch/arm64/include/asm/kvm_mmu.h +++ b/arch/arm64/include/asm/kvm_mmu.h @@ -141,8 +141,16 @@ static inline unsigned long __kern_hyp_va(unsigned long v) * We currently only support a 40bit IPA. */ #define KVM_PHYS_SHIFT (40) -#define KVM_PHYS_SIZE (1UL << KVM_PHYS_SHIFT) -#define KVM_PHYS_MASK (KVM_PHYS_SIZE - 1UL) + +#define kvm_phys_shift(kvm) VTCR_EL2_IPA(kvm->arch.vtcr) +#define kvm_phys_size(kvm) (_AC(1, ULL) << kvm_phys_shift(kvm)) +#define kvm_phys_mask(kvm) (kvm_phys_size(kvm) - _AC(1, ULL)) + +static inline bool kvm_page_empty(void *ptr) +{ + struct page *ptr_page = virt_to_page(ptr); + return page_count(ptr_page) == 1; +} #include <asm/stage2_pgtable.h> @@ -238,12 +246,6 @@ static inline bool kvm_s2pmd_exec(pmd_t *pmdp) return !(READ_ONCE(pmd_val(*pmdp)) & PMD_S2_XN); } -static inline bool kvm_page_empty(void *ptr) -{ - struct page *ptr_page = virt_to_page(ptr); - return page_count(ptr_page) == 1; -} - #define hyp_pte_table_empty(ptep) kvm_page_empty(ptep) #ifdef __PAGETABLE_PMD_FOLDED @@ -517,5 +519,34 @@ static inline int hyp_map_aux_data(void) #define kvm_phys_to_vttbr(addr) phys_to_ttbr(addr) +/* + * Get the magic number 'x' for VTTBR:BADDR of this KVM instance. + * With v8.2 LVA extensions, 'x' should be a minimum of 6 with + * 52bit IPS. + */ +static inline int arm64_vttbr_x(u32 ipa_shift, u32 levels) +{ + int x = ARM64_VTTBR_X(ipa_shift, levels); + + return (IS_ENABLED(CONFIG_ARM64_PA_BITS_52) && x < 6) ? 6 : x; +} + +static inline u64 vttbr_baddr_mask(u32 ipa_shift, u32 levels) +{ + unsigned int x = arm64_vttbr_x(ipa_shift, levels); + + return GENMASK_ULL(PHYS_MASK_SHIFT - 1, x); +} + +static inline u64 kvm_vttbr_baddr_mask(struct kvm *kvm) +{ + return vttbr_baddr_mask(kvm_phys_shift(kvm), kvm_stage2_levels(kvm)); +} + +static inline bool kvm_cpu_has_cnp(void) +{ + return system_supports_cnp(); +} + #endif /* __ASSEMBLY__ */ #endif /* __ARM64_KVM_MMU_H__ */ diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h index dd320df0d026..7689c7aa1d77 100644 --- a/arch/arm64/include/asm/mmu.h +++ b/arch/arm64/include/asm/mmu.h @@ -95,5 +95,8 @@ extern void create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys, extern void *fixmap_remap_fdt(phys_addr_t dt_phys); extern void mark_linear_text_alias_ro(void); +#define INIT_MM_CONTEXT(name) \ + .pgd = init_pg_dir, + #endif /* !__ASSEMBLY__ */ #endif diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h index 39ec0b8a689e..1e58bf58c22b 100644 --- a/arch/arm64/include/asm/mmu_context.h +++ b/arch/arm64/include/asm/mmu_context.h @@ -147,12 +147,25 @@ static inline void cpu_replace_ttbr1(pgd_t *pgdp) extern ttbr_replace_func idmap_cpu_replace_ttbr1; ttbr_replace_func *replace_phys; - phys_addr_t pgd_phys = virt_to_phys(pgdp); + /* phys_to_ttbr() zeros lower 2 bits of ttbr with 52-bit PA */ + phys_addr_t ttbr1 = phys_to_ttbr(virt_to_phys(pgdp)); + + if (system_supports_cnp() && !WARN_ON(pgdp != lm_alias(swapper_pg_dir))) { + /* + * cpu_replace_ttbr1() is used when there's a boot CPU + * up (i.e. cpufeature framework is not up yet) and + * latter only when we enable CNP via cpufeature's + * enable() callback. + * Also we rely on the cpu_hwcap bit being set before + * calling the enable() function. + */ + ttbr1 |= TTBR_CNP_BIT; + } replace_phys = (void *)__pa_symbol(idmap_cpu_replace_ttbr1); cpu_install_idmap(); - replace_phys(pgd_phys); + replace_phys(ttbr1); cpu_uninstall_idmap(); } diff --git a/arch/arm64/include/asm/page.h b/arch/arm64/include/asm/page.h index 60d02c81a3a2..c88a3cb117a1 100644 --- a/arch/arm64/include/asm/page.h +++ b/arch/arm64/include/asm/page.h @@ -37,9 +37,7 @@ extern void clear_page(void *to); typedef struct page *pgtable_t; -#ifdef CONFIG_HAVE_ARCH_PFN_VALID extern int pfn_valid(unsigned long); -#endif #include <asm/memory.h> diff --git a/arch/arm64/include/asm/paravirt.h b/arch/arm64/include/asm/paravirt.h index bb5dcea42003..799d9dd6f7cc 100644 --- a/arch/arm64/include/asm/paravirt.h +++ b/arch/arm64/include/asm/paravirt.h @@ -10,11 +10,16 @@ extern struct static_key paravirt_steal_rq_enabled; struct pv_time_ops { unsigned long long (*steal_clock)(int cpu); }; -extern struct pv_time_ops pv_time_ops; + +struct paravirt_patch_template { + struct pv_time_ops time; +}; + +extern struct paravirt_patch_template pv_ops; static inline u64 paravirt_steal_clock(int cpu) { - return pv_time_ops.steal_clock(cpu); + return pv_ops.time.steal_clock(cpu); } #endif diff --git a/arch/arm64/include/asm/percpu.h b/arch/arm64/include/asm/percpu.h index 9234013e759e..21a81b59a0cc 100644 --- a/arch/arm64/include/asm/percpu.h +++ b/arch/arm64/include/asm/percpu.h @@ -96,6 +96,7 @@ static inline unsigned long __percpu_##op(void *ptr, \ : [val] "Ir" (val)); \ break; \ default: \ + ret = 0; \ BUILD_BUG(); \ } \ \ @@ -125,6 +126,7 @@ static inline unsigned long __percpu_read(void *ptr, int size) ret = READ_ONCE(*(u64 *)ptr); break; default: + ret = 0; BUILD_BUG(); } @@ -194,6 +196,7 @@ static inline unsigned long __percpu_xchg(void *ptr, unsigned long val, : [val] "r" (val)); break; default: + ret = 0; BUILD_BUG(); } diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h index fd208eac9f2a..1d7d8da2ef9b 100644 --- a/arch/arm64/include/asm/pgtable-hwdef.h +++ b/arch/arm64/include/asm/pgtable-hwdef.h @@ -211,6 +211,8 @@ #define PHYS_MASK_SHIFT (CONFIG_ARM64_PA_BITS) #define PHYS_MASK ((UL(1) << PHYS_MASK_SHIFT) - 1) +#define TTBR_CNP_BIT (UL(1) << 0) + /* * TCR flags. */ diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 1bdeca8918a6..50b1ef8584c0 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -360,6 +360,7 @@ static inline int pmd_protnone(pmd_t pmd) #define pmd_present(pmd) pte_present(pmd_pte(pmd)) #define pmd_dirty(pmd) pte_dirty(pmd_pte(pmd)) #define pmd_young(pmd) pte_young(pmd_pte(pmd)) +#define pmd_valid(pmd) pte_valid(pmd_pte(pmd)) #define pmd_wrprotect(pmd) pte_pmd(pte_wrprotect(pmd_pte(pmd))) #define pmd_mkold(pmd) pte_pmd(pte_mkold(pmd_pte(pmd))) #define pmd_mkwrite(pmd) pte_pmd(pte_mkwrite(pmd_pte(pmd))) @@ -428,10 +429,33 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, PUD_TYPE_TABLE) #endif +extern pgd_t init_pg_dir[PTRS_PER_PGD]; +extern pgd_t init_pg_end[]; +extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; +extern pgd_t idmap_pg_dir[PTRS_PER_PGD]; +extern pgd_t tramp_pg_dir[PTRS_PER_PGD]; + +extern void set_swapper_pgd(pgd_t *pgdp, pgd_t pgd); + +static inline bool in_swapper_pgdir(void *addr) +{ + return ((unsigned long)addr & PAGE_MASK) == + ((unsigned long)swapper_pg_dir & PAGE_MASK); +} + static inline void set_pmd(pmd_t *pmdp, pmd_t pmd) { +#ifdef __PAGETABLE_PMD_FOLDED + if (in_swapper_pgdir(pmdp)) { + set_swapper_pgd((pgd_t *)pmdp, __pgd(pmd_val(pmd))); + return; + } +#endif /* __PAGETABLE_PMD_FOLDED */ + WRITE_ONCE(*pmdp, pmd); - dsb(ishst); + + if (pmd_valid(pmd)) + dsb(ishst); } static inline void pmd_clear(pmd_t *pmdp) @@ -477,11 +501,21 @@ static inline phys_addr_t pmd_page_paddr(pmd_t pmd) #define pud_none(pud) (!pud_val(pud)) #define pud_bad(pud) (!(pud_val(pud) & PUD_TABLE_BIT)) #define pud_present(pud) pte_present(pud_pte(pud)) +#define pud_valid(pud) pte_valid(pud_pte(pud)) static inline void set_pud(pud_t *pudp, pud_t pud) { +#ifdef __PAGETABLE_PUD_FOLDED + if (in_swapper_pgdir(pudp)) { + set_swapper_pgd((pgd_t *)pudp, __pgd(pud_val(pud))); + return; + } +#endif /* __PAGETABLE_PUD_FOLDED */ + WRITE_ONCE(*pudp, pud); - dsb(ishst); + + if (pud_valid(pud)) + dsb(ishst); } static inline void pud_clear(pud_t *pudp) @@ -532,6 +566,11 @@ static inline phys_addr_t pud_page_paddr(pud_t pud) static inline void set_pgd(pgd_t *pgdp, pgd_t pgd) { + if (in_swapper_pgdir(pgdp)) { + set_swapper_pgd(pgdp, pgd); + return; + } + WRITE_ONCE(*pgdp, pgd); dsb(ishst); } @@ -712,11 +751,6 @@ static inline pmd_t pmdp_establish(struct vm_area_struct *vma, } #endif -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -extern pgd_t swapper_pg_end[]; -extern pgd_t idmap_pg_dir[PTRS_PER_PGD]; -extern pgd_t tramp_pg_dir[PTRS_PER_PGD]; - /* * Encode and decode a swap entry: * bits 0-1: present (must be zero) diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index 79657ad91397..3e2091708b8e 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -25,13 +25,6 @@ #define USER_DS (TASK_SIZE_64 - 1) #ifndef __ASSEMBLY__ - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l;}) - #ifdef __KERNEL__ #include <linux/build_bug.h> @@ -174,6 +167,10 @@ static inline void start_thread(struct pt_regs *regs, unsigned long pc, { start_thread_common(regs, pc); regs->pstate = PSR_MODE_EL0t; + + if (arm64_get_ssbd_state() != ARM64_SSBD_FORCE_ENABLE) + regs->pstate |= PSR_SSBS_BIT; + regs->sp = sp; } @@ -190,6 +187,9 @@ static inline void compat_start_thread(struct pt_regs *regs, unsigned long pc, regs->pstate |= PSR_AA32_E_BIT; #endif + if (arm64_get_ssbd_state() != ARM64_SSBD_FORCE_ENABLE) + regs->pstate |= PSR_AA32_SSBS_BIT; + regs->compat_sp = sp; } #endif @@ -244,10 +244,6 @@ static inline void spin_lock_prefetch(const void *ptr) #endif -void cpu_enable_pan(const struct arm64_cpu_capabilities *__unused); -void cpu_enable_cache_maint_trap(const struct arm64_cpu_capabilities *__unused); -void cpu_clear_disr(const struct arm64_cpu_capabilities *__unused); - extern unsigned long __ro_after_init signal_minsigstksz; /* sigframe size */ extern void __init minsigstksz_setup(void); diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h index 177b851ca6d9..fce22c4b2f73 100644 --- a/arch/arm64/include/asm/ptrace.h +++ b/arch/arm64/include/asm/ptrace.h @@ -25,6 +25,9 @@ #define CurrentEL_EL1 (1 << 2) #define CurrentEL_EL2 (2 << 2) +/* Additional SPSR bits not exposed in the UABI */ +#define PSR_IL_BIT (1 << 20) + /* AArch32-specific ptrace requests */ #define COMPAT_PTRACE_GETREGS 12 #define COMPAT_PTRACE_SETREGS 13 @@ -50,6 +53,7 @@ #define PSR_AA32_I_BIT 0x00000080 #define PSR_AA32_A_BIT 0x00000100 #define PSR_AA32_E_BIT 0x00000200 +#define PSR_AA32_SSBS_BIT 0x00800000 #define PSR_AA32_DIT_BIT 0x01000000 #define PSR_AA32_Q_BIT 0x08000000 #define PSR_AA32_V_BIT 0x10000000 diff --git a/arch/arm64/include/asm/stage2_pgtable-nopmd.h b/arch/arm64/include/asm/stage2_pgtable-nopmd.h deleted file mode 100644 index 2656a0fd05a6..000000000000 --- a/arch/arm64/include/asm/stage2_pgtable-nopmd.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2016 - ARM Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef __ARM64_S2_PGTABLE_NOPMD_H_ -#define __ARM64_S2_PGTABLE_NOPMD_H_ - -#include <asm/stage2_pgtable-nopud.h> - -#define __S2_PGTABLE_PMD_FOLDED - -#define S2_PMD_SHIFT S2_PUD_SHIFT -#define S2_PTRS_PER_PMD 1 -#define S2_PMD_SIZE (1UL << S2_PMD_SHIFT) -#define S2_PMD_MASK (~(S2_PMD_SIZE-1)) - -#define stage2_pud_none(pud) (0) -#define stage2_pud_present(pud) (1) -#define stage2_pud_clear(pud) do { } while (0) -#define stage2_pud_populate(pud, pmd) do { } while (0) -#define stage2_pmd_offset(pud, address) ((pmd_t *)(pud)) - -#define stage2_pmd_free(pmd) do { } while (0) - -#define stage2_pmd_addr_end(addr, end) (end) - -#define stage2_pud_huge(pud) (0) -#define stage2_pmd_table_empty(pmdp) (0) - -#endif diff --git a/arch/arm64/include/asm/stage2_pgtable-nopud.h b/arch/arm64/include/asm/stage2_pgtable-nopud.h deleted file mode 100644 index 5ee87b54ebf3..000000000000 --- a/arch/arm64/include/asm/stage2_pgtable-nopud.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 2016 - ARM Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef __ARM64_S2_PGTABLE_NOPUD_H_ -#define __ARM64_S2_PGTABLE_NOPUD_H_ - -#define __S2_PGTABLE_PUD_FOLDED - -#define S2_PUD_SHIFT S2_PGDIR_SHIFT -#define S2_PTRS_PER_PUD 1 -#define S2_PUD_SIZE (_AC(1, UL) << S2_PUD_SHIFT) -#define S2_PUD_MASK (~(S2_PUD_SIZE-1)) - -#define stage2_pgd_none(pgd) (0) -#define stage2_pgd_present(pgd) (1) -#define stage2_pgd_clear(pgd) do { } while (0) -#define stage2_pgd_populate(pgd, pud) do { } while (0) - -#define stage2_pud_offset(pgd, address) ((pud_t *)(pgd)) - -#define stage2_pud_free(x) do { } while (0) - -#define stage2_pud_addr_end(addr, end) (end) -#define stage2_pud_table_empty(pmdp) (0) - -#endif diff --git a/arch/arm64/include/asm/stage2_pgtable.h b/arch/arm64/include/asm/stage2_pgtable.h index 8b68099348e5..d352f6df8d2c 100644 --- a/arch/arm64/include/asm/stage2_pgtable.h +++ b/arch/arm64/include/asm/stage2_pgtable.h @@ -19,9 +19,17 @@ #ifndef __ARM64_S2_PGTABLE_H_ #define __ARM64_S2_PGTABLE_H_ +#include <linux/hugetlb.h> #include <asm/pgtable.h> /* + * PGDIR_SHIFT determines the size a top-level page table entry can map + * and depends on the number of levels in the page table. Compute the + * PGDIR_SHIFT for a given number of levels. + */ +#define pt_levels_pgdir_shift(lvls) ARM64_HW_PGTABLE_LEVEL_SHIFT(4 - (lvls)) + +/* * The hardware supports concatenation of up to 16 tables at stage2 entry level * and we use the feature whenever possible. * @@ -29,112 +37,208 @@ * On arm64, the smallest PAGE_SIZE supported is 4k, which means * (PAGE_SHIFT - 3) > 4 holds for all page sizes. * This implies, the total number of page table levels at stage2 expected - * by the hardware is actually the number of levels required for (KVM_PHYS_SHIFT - 4) + * by the hardware is actually the number of levels required for (IPA_SHIFT - 4) * in normal translations(e.g, stage1), since we cannot have another level in - * the range (KVM_PHYS_SHIFT, KVM_PHYS_SHIFT - 4). + * the range (IPA_SHIFT, IPA_SHIFT - 4). */ -#define STAGE2_PGTABLE_LEVELS ARM64_HW_PGTABLE_LEVELS(KVM_PHYS_SHIFT - 4) +#define stage2_pgtable_levels(ipa) ARM64_HW_PGTABLE_LEVELS((ipa) - 4) +#define kvm_stage2_levels(kvm) VTCR_EL2_LVLS(kvm->arch.vtcr) -/* - * With all the supported VA_BITs and 40bit guest IPA, the following condition - * is always true: - * - * STAGE2_PGTABLE_LEVELS <= CONFIG_PGTABLE_LEVELS - * - * We base our stage-2 page table walker helpers on this assumption and - * fall back to using the host version of the helper wherever possible. - * i.e, if a particular level is not folded (e.g, PUD) at stage2, we fall back - * to using the host version, since it is guaranteed it is not folded at host. - * - * If the condition breaks in the future, we can rearrange the host level - * definitions and reuse them for stage2. Till then... - */ -#if STAGE2_PGTABLE_LEVELS > CONFIG_PGTABLE_LEVELS -#error "Unsupported combination of guest IPA and host VA_BITS." -#endif - -/* S2_PGDIR_SHIFT is the size mapped by top-level stage2 entry */ -#define S2_PGDIR_SHIFT ARM64_HW_PGTABLE_LEVEL_SHIFT(4 - STAGE2_PGTABLE_LEVELS) -#define S2_PGDIR_SIZE (_AC(1, UL) << S2_PGDIR_SHIFT) -#define S2_PGDIR_MASK (~(S2_PGDIR_SIZE - 1)) +/* stage2_pgdir_shift() is the size mapped by top-level stage2 entry for the VM */ +#define stage2_pgdir_shift(kvm) pt_levels_pgdir_shift(kvm_stage2_levels(kvm)) +#define stage2_pgdir_size(kvm) (1ULL << stage2_pgdir_shift(kvm)) +#define stage2_pgdir_mask(kvm) ~(stage2_pgdir_size(kvm) - 1) /* * The number of PTRS across all concatenated stage2 tables given by the * number of bits resolved at the initial level. + * If we force more levels than necessary, we may have (stage2_pgdir_shift > IPA), + * in which case, stage2_pgd_ptrs will have one entry. */ -#define PTRS_PER_S2_PGD (1 << (KVM_PHYS_SHIFT - S2_PGDIR_SHIFT)) +#define pgd_ptrs_shift(ipa, pgdir_shift) \ + ((ipa) > (pgdir_shift) ? ((ipa) - (pgdir_shift)) : 0) +#define __s2_pgd_ptrs(ipa, lvls) \ + (1 << (pgd_ptrs_shift((ipa), pt_levels_pgdir_shift(lvls)))) +#define __s2_pgd_size(ipa, lvls) (__s2_pgd_ptrs((ipa), (lvls)) * sizeof(pgd_t)) + +#define stage2_pgd_ptrs(kvm) __s2_pgd_ptrs(kvm_phys_shift(kvm), kvm_stage2_levels(kvm)) +#define stage2_pgd_size(kvm) __s2_pgd_size(kvm_phys_shift(kvm), kvm_stage2_levels(kvm)) /* - * KVM_MMU_CACHE_MIN_PAGES is the number of stage2 page table translation - * levels in addition to the PGD. + * kvm_mmmu_cache_min_pages() is the number of pages required to install + * a stage-2 translation. We pre-allocate the entry level page table at + * the VM creation. */ -#define KVM_MMU_CACHE_MIN_PAGES (STAGE2_PGTABLE_LEVELS - 1) +#define kvm_mmu_cache_min_pages(kvm) (kvm_stage2_levels(kvm) - 1) - -#if STAGE2_PGTABLE_LEVELS > 3 +/* Stage2 PUD definitions when the level is present */ +static inline bool kvm_stage2_has_pud(struct kvm *kvm) +{ + return (CONFIG_PGTABLE_LEVELS > 3) && (kvm_stage2_levels(kvm) > 3); +} #define S2_PUD_SHIFT ARM64_HW_PGTABLE_LEVEL_SHIFT(1) -#define S2_PUD_SIZE (_AC(1, UL) << S2_PUD_SHIFT) +#define S2_PUD_SIZE (1UL << S2_PUD_SHIFT) #define S2_PUD_MASK (~(S2_PUD_SIZE - 1)) -#define stage2_pgd_none(pgd) pgd_none(pgd) -#define stage2_pgd_clear(pgd) pgd_clear(pgd) -#define stage2_pgd_present(pgd) pgd_present(pgd) -#define stage2_pgd_populate(pgd, pud) pgd_populate(NULL, pgd, pud) -#define stage2_pud_offset(pgd, address) pud_offset(pgd, address) -#define stage2_pud_free(pud) pud_free(NULL, pud) +static inline bool stage2_pgd_none(struct kvm *kvm, pgd_t pgd) +{ + if (kvm_stage2_has_pud(kvm)) + return pgd_none(pgd); + else + return 0; +} -#define stage2_pud_table_empty(pudp) kvm_page_empty(pudp) +static inline void stage2_pgd_clear(struct kvm *kvm, pgd_t *pgdp) +{ + if (kvm_stage2_has_pud(kvm)) + pgd_clear(pgdp); +} -static inline phys_addr_t stage2_pud_addr_end(phys_addr_t addr, phys_addr_t end) +static inline bool stage2_pgd_present(struct kvm *kvm, pgd_t pgd) { - phys_addr_t boundary = (addr + S2_PUD_SIZE) & S2_PUD_MASK; + if (kvm_stage2_has_pud(kvm)) + return pgd_present(pgd); + else + return 1; +} - return (boundary - 1 < end - 1) ? boundary : end; +static inline void stage2_pgd_populate(struct kvm *kvm, pgd_t *pgd, pud_t *pud) +{ + if (kvm_stage2_has_pud(kvm)) + pgd_populate(NULL, pgd, pud); +} + +static inline pud_t *stage2_pud_offset(struct kvm *kvm, + pgd_t *pgd, unsigned long address) +{ + if (kvm_stage2_has_pud(kvm)) + return pud_offset(pgd, address); + else + return (pud_t *)pgd; } -#endif /* STAGE2_PGTABLE_LEVELS > 3 */ +static inline void stage2_pud_free(struct kvm *kvm, pud_t *pud) +{ + if (kvm_stage2_has_pud(kvm)) + pud_free(NULL, pud); +} +static inline bool stage2_pud_table_empty(struct kvm *kvm, pud_t *pudp) +{ + if (kvm_stage2_has_pud(kvm)) + return kvm_page_empty(pudp); + else + return false; +} -#if STAGE2_PGTABLE_LEVELS > 2 +static inline phys_addr_t +stage2_pud_addr_end(struct kvm *kvm, phys_addr_t addr, phys_addr_t end) +{ + if (kvm_stage2_has_pud(kvm)) { + phys_addr_t boundary = (addr + S2_PUD_SIZE) & S2_PUD_MASK; + + return (boundary - 1 < end - 1) ? boundary : end; + } else { + return end; + } +} + +/* Stage2 PMD definitions when the level is present */ +static inline bool kvm_stage2_has_pmd(struct kvm *kvm) +{ + return (CONFIG_PGTABLE_LEVELS > 2) && (kvm_stage2_levels(kvm) > 2); +} #define S2_PMD_SHIFT ARM64_HW_PGTABLE_LEVEL_SHIFT(2) -#define S2_PMD_SIZE (_AC(1, UL) << S2_PMD_SHIFT) +#define S2_PMD_SIZE (1UL << S2_PMD_SHIFT) #define S2_PMD_MASK (~(S2_PMD_SIZE - 1)) -#define stage2_pud_none(pud) pud_none(pud) -#define stage2_pud_clear(pud) pud_clear(pud) -#define stage2_pud_present(pud) pud_present(pud) -#define stage2_pud_populate(pud, pmd) pud_populate(NULL, pud, pmd) -#define stage2_pmd_offset(pud, address) pmd_offset(pud, address) -#define stage2_pmd_free(pmd) pmd_free(NULL, pmd) +static inline bool stage2_pud_none(struct kvm *kvm, pud_t pud) +{ + if (kvm_stage2_has_pmd(kvm)) + return pud_none(pud); + else + return 0; +} + +static inline void stage2_pud_clear(struct kvm *kvm, pud_t *pud) +{ + if (kvm_stage2_has_pmd(kvm)) + pud_clear(pud); +} -#define stage2_pud_huge(pud) pud_huge(pud) -#define stage2_pmd_table_empty(pmdp) kvm_page_empty(pmdp) +static inline bool stage2_pud_present(struct kvm *kvm, pud_t pud) +{ + if (kvm_stage2_has_pmd(kvm)) + return pud_present(pud); + else + return 1; +} -static inline phys_addr_t stage2_pmd_addr_end(phys_addr_t addr, phys_addr_t end) +static inline void stage2_pud_populate(struct kvm *kvm, pud_t *pud, pmd_t *pmd) { - phys_addr_t boundary = (addr + S2_PMD_SIZE) & S2_PMD_MASK; + if (kvm_stage2_has_pmd(kvm)) + pud_populate(NULL, pud, pmd); +} - return (boundary - 1 < end - 1) ? boundary : end; +static inline pmd_t *stage2_pmd_offset(struct kvm *kvm, + pud_t *pud, unsigned long address) +{ + if (kvm_stage2_has_pmd(kvm)) + return pmd_offset(pud, address); + else + return (pmd_t *)pud; } -#endif /* STAGE2_PGTABLE_LEVELS > 2 */ +static inline void stage2_pmd_free(struct kvm *kvm, pmd_t *pmd) +{ + if (kvm_stage2_has_pmd(kvm)) + pmd_free(NULL, pmd); +} + +static inline bool stage2_pud_huge(struct kvm *kvm, pud_t pud) +{ + if (kvm_stage2_has_pmd(kvm)) + return pud_huge(pud); + else + return 0; +} + +static inline bool stage2_pmd_table_empty(struct kvm *kvm, pmd_t *pmdp) +{ + if (kvm_stage2_has_pmd(kvm)) + return kvm_page_empty(pmdp); + else + return 0; +} -#define stage2_pte_table_empty(ptep) kvm_page_empty(ptep) +static inline phys_addr_t +stage2_pmd_addr_end(struct kvm *kvm, phys_addr_t addr, phys_addr_t end) +{ + if (kvm_stage2_has_pmd(kvm)) { + phys_addr_t boundary = (addr + S2_PMD_SIZE) & S2_PMD_MASK; -#if STAGE2_PGTABLE_LEVELS == 2 -#include <asm/stage2_pgtable-nopmd.h> -#elif STAGE2_PGTABLE_LEVELS == 3 -#include <asm/stage2_pgtable-nopud.h> -#endif + return (boundary - 1 < end - 1) ? boundary : end; + } else { + return end; + } +} +static inline bool stage2_pte_table_empty(struct kvm *kvm, pte_t *ptep) +{ + return kvm_page_empty(ptep); +} -#define stage2_pgd_index(addr) (((addr) >> S2_PGDIR_SHIFT) & (PTRS_PER_S2_PGD - 1)) +static inline unsigned long stage2_pgd_index(struct kvm *kvm, phys_addr_t addr) +{ + return (((addr) >> stage2_pgdir_shift(kvm)) & (stage2_pgd_ptrs(kvm) - 1)); +} -static inline phys_addr_t stage2_pgd_addr_end(phys_addr_t addr, phys_addr_t end) +static inline phys_addr_t +stage2_pgd_addr_end(struct kvm *kvm, phys_addr_t addr, phys_addr_t end) { - phys_addr_t boundary = (addr + S2_PGDIR_SIZE) & S2_PGDIR_MASK; + phys_addr_t boundary = (addr + stage2_pgdir_size(kvm)) & stage2_pgdir_mask(kvm); return (boundary - 1 < end - 1) ? boundary : end; } diff --git a/arch/arm64/include/asm/stat.h b/arch/arm64/include/asm/stat.h index eab738019707..397c6ccd04e7 100644 --- a/arch/arm64/include/asm/stat.h +++ b/arch/arm64/include/asm/stat.h @@ -20,7 +20,7 @@ #ifdef CONFIG_COMPAT -#include <linux/compat_time.h> +#include <linux/time.h> #include <asm/compat.h> /* diff --git a/arch/arm64/include/asm/string.h b/arch/arm64/include/asm/string.h index dd95d33a5bd5..03a6c256b7ec 100644 --- a/arch/arm64/include/asm/string.h +++ b/arch/arm64/include/asm/string.h @@ -16,6 +16,7 @@ #ifndef __ASM_STRING_H #define __ASM_STRING_H +#ifndef CONFIG_KASAN #define __HAVE_ARCH_STRRCHR extern char *strrchr(const char *, int c); @@ -34,6 +35,13 @@ extern __kernel_size_t strlen(const char *); #define __HAVE_ARCH_STRNLEN extern __kernel_size_t strnlen(const char *, __kernel_size_t); +#define __HAVE_ARCH_MEMCMP +extern int memcmp(const void *, const void *, size_t); + +#define __HAVE_ARCH_MEMCHR +extern void *memchr(const void *, int, __kernel_size_t); +#endif + #define __HAVE_ARCH_MEMCPY extern void *memcpy(void *, const void *, __kernel_size_t); extern void *__memcpy(void *, const void *, __kernel_size_t); @@ -42,16 +50,10 @@ extern void *__memcpy(void *, const void *, __kernel_size_t); extern void *memmove(void *, const void *, __kernel_size_t); extern void *__memmove(void *, const void *, __kernel_size_t); -#define __HAVE_ARCH_MEMCHR -extern void *memchr(const void *, int, __kernel_size_t); - #define __HAVE_ARCH_MEMSET extern void *memset(void *, int, __kernel_size_t); extern void *__memset(void *, int, __kernel_size_t); -#define __HAVE_ARCH_MEMCMP -extern int memcmp(const void *, const void *, size_t); - #ifdef CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE #define __HAVE_ARCH_MEMCPY_FLUSHCACHE void memcpy_flushcache(void *dst, const void *src, size_t cnt); diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index c1470931b897..0c909c4a932f 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -20,7 +20,6 @@ #ifndef __ASM_SYSREG_H #define __ASM_SYSREG_H -#include <asm/compiler.h> #include <linux/stringify.h> /* @@ -84,13 +83,26 @@ #endif /* CONFIG_BROKEN_GAS_INST */ -#define REG_PSTATE_PAN_IMM sys_reg(0, 0, 4, 0, 4) -#define REG_PSTATE_UAO_IMM sys_reg(0, 0, 4, 0, 3) +/* + * Instructions for modifying PSTATE fields. + * As per Arm ARM for v8-A, Section "C.5.1.3 op0 == 0b00, architectural hints, + * barriers and CLREX, and PSTATE access", ARM DDI 0487 C.a, system instructions + * for accessing PSTATE fields have the following encoding: + * Op0 = 0, CRn = 4 + * Op1, Op2 encodes the PSTATE field modified and defines the constraints. + * CRm = Imm4 for the instruction. + * Rt = 0x1f + */ +#define pstate_field(op1, op2) ((op1) << Op1_shift | (op2) << Op2_shift) +#define PSTATE_Imm_shift CRm_shift + +#define PSTATE_PAN pstate_field(0, 4) +#define PSTATE_UAO pstate_field(0, 3) +#define PSTATE_SSBS pstate_field(3, 1) -#define SET_PSTATE_PAN(x) __emit_inst(0xd5000000 | REG_PSTATE_PAN_IMM | \ - (!!x)<<8 | 0x1f) -#define SET_PSTATE_UAO(x) __emit_inst(0xd5000000 | REG_PSTATE_UAO_IMM | \ - (!!x)<<8 | 0x1f) +#define SET_PSTATE_PAN(x) __emit_inst(0xd500401f | PSTATE_PAN | ((!!x) << PSTATE_Imm_shift)) +#define SET_PSTATE_UAO(x) __emit_inst(0xd500401f | PSTATE_UAO | ((!!x) << PSTATE_Imm_shift)) +#define SET_PSTATE_SSBS(x) __emit_inst(0xd500401f | PSTATE_SSBS | ((!!x) << PSTATE_Imm_shift)) #define SYS_DC_ISW sys_insn(1, 0, 7, 6, 2) #define SYS_DC_CSW sys_insn(1, 0, 7, 10, 2) @@ -419,6 +431,7 @@ #define SYS_ICH_LR15_EL2 __SYS__LR8_EL2(7) /* Common SCTLR_ELx flags. */ +#define SCTLR_ELx_DSSBS (1UL << 44) #define SCTLR_ELx_EE (1 << 25) #define SCTLR_ELx_IESB (1 << 21) #define SCTLR_ELx_WXN (1 << 19) @@ -439,7 +452,7 @@ (1 << 10) | (1 << 13) | (1 << 14) | (1 << 15) | \ (1 << 17) | (1 << 20) | (1 << 24) | (1 << 26) | \ (1 << 27) | (1 << 30) | (1 << 31) | \ - (0xffffffffUL << 32)) + (0xffffefffUL << 32)) #ifdef CONFIG_CPU_BIG_ENDIAN #define ENDIAN_SET_EL2 SCTLR_ELx_EE @@ -453,7 +466,7 @@ #define SCTLR_EL2_SET (SCTLR_ELx_IESB | ENDIAN_SET_EL2 | SCTLR_EL2_RES1) #define SCTLR_EL2_CLEAR (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \ SCTLR_ELx_SA | SCTLR_ELx_I | SCTLR_ELx_WXN | \ - ENDIAN_CLEAR_EL2 | SCTLR_EL2_RES0) + SCTLR_ELx_DSSBS | ENDIAN_CLEAR_EL2 | SCTLR_EL2_RES0) #if (SCTLR_EL2_SET ^ SCTLR_EL2_CLEAR) != 0xffffffffffffffff #error "Inconsistent SCTLR_EL2 set/clear bits" @@ -477,7 +490,7 @@ (1 << 29)) #define SCTLR_EL1_RES0 ((1 << 6) | (1 << 10) | (1 << 13) | (1 << 17) | \ (1 << 27) | (1 << 30) | (1 << 31) | \ - (0xffffffffUL << 32)) + (0xffffefffUL << 32)) #ifdef CONFIG_CPU_BIG_ENDIAN #define ENDIAN_SET_EL1 (SCTLR_EL1_E0E | SCTLR_ELx_EE) @@ -489,12 +502,12 @@ #define SCTLR_EL1_SET (SCTLR_ELx_M | SCTLR_ELx_C | SCTLR_ELx_SA |\ SCTLR_EL1_SA0 | SCTLR_EL1_SED | SCTLR_ELx_I |\ - SCTLR_EL1_DZE | SCTLR_EL1_UCT | SCTLR_EL1_NTWI |\ + SCTLR_EL1_DZE | SCTLR_EL1_UCT |\ SCTLR_EL1_NTWE | SCTLR_ELx_IESB | SCTLR_EL1_SPAN |\ ENDIAN_SET_EL1 | SCTLR_EL1_UCI | SCTLR_EL1_RES1) #define SCTLR_EL1_CLEAR (SCTLR_ELx_A | SCTLR_EL1_CP15BEN | SCTLR_EL1_ITD |\ SCTLR_EL1_UMA | SCTLR_ELx_WXN | ENDIAN_CLEAR_EL1 |\ - SCTLR_EL1_RES0) + SCTLR_ELx_DSSBS | SCTLR_EL1_NTWI | SCTLR_EL1_RES0) #if (SCTLR_EL1_SET ^ SCTLR_EL1_CLEAR) != 0xffffffffffffffff #error "Inconsistent SCTLR_EL1 set/clear bits" @@ -544,6 +557,13 @@ #define ID_AA64PFR0_EL0_64BIT_ONLY 0x1 #define ID_AA64PFR0_EL0_32BIT_64BIT 0x2 +/* id_aa64pfr1 */ +#define ID_AA64PFR1_SSBS_SHIFT 4 + +#define ID_AA64PFR1_SSBS_PSTATE_NI 0 +#define ID_AA64PFR1_SSBS_PSTATE_ONLY 1 +#define ID_AA64PFR1_SSBS_PSTATE_INSNS 2 + /* id_aa64mmfr0 */ #define ID_AA64MMFR0_TGRAN4_SHIFT 28 #define ID_AA64MMFR0_TGRAN64_SHIFT 24 diff --git a/arch/arm64/include/asm/system_misc.h b/arch/arm64/include/asm/system_misc.h index 28893a0b141d..0e2a0ecaf484 100644 --- a/arch/arm64/include/asm/system_misc.h +++ b/arch/arm64/include/asm/system_misc.h @@ -33,7 +33,8 @@ void die(const char *msg, struct pt_regs *regs, int err); struct siginfo; void arm64_notify_die(const char *str, struct pt_regs *regs, - struct siginfo *info, int err); + int signo, int sicode, void __user *addr, + int err); void hook_debug_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *), diff --git a/arch/arm64/include/asm/tlb.h b/arch/arm64/include/asm/tlb.h index a3233167be60..106fdc951b6e 100644 --- a/arch/arm64/include/asm/tlb.h +++ b/arch/arm64/include/asm/tlb.h @@ -22,16 +22,10 @@ #include <linux/pagemap.h> #include <linux/swap.h> -#ifdef CONFIG_HAVE_RCU_TABLE_FREE - -#define tlb_remove_entry(tlb, entry) tlb_remove_table(tlb, entry) static inline void __tlb_remove_table(void *_table) { free_page_and_swap_cache((struct page *)_table); } -#else -#define tlb_remove_entry(tlb, entry) tlb_remove_page(tlb, entry) -#endif /* CONFIG_HAVE_RCU_TABLE_FREE */ static void tlb_flush(struct mmu_gather *tlb); @@ -40,36 +34,35 @@ static void tlb_flush(struct mmu_gather *tlb); static inline void tlb_flush(struct mmu_gather *tlb) { struct vm_area_struct vma = TLB_FLUSH_VMA(tlb->mm, 0); + bool last_level = !tlb->freed_tables; + unsigned long stride = tlb_get_unmap_size(tlb); /* - * The ASID allocator will either invalidate the ASID or mark - * it as used. + * If we're tearing down the address space then we only care about + * invalidating the walk-cache, since the ASID allocator won't + * reallocate our ASID without invalidating the entire TLB. */ - if (tlb->fullmm) + if (tlb->fullmm) { + if (!last_level) + flush_tlb_mm(tlb->mm); return; + } - /* - * The intermediate page table levels are already handled by - * the __(pte|pmd|pud)_free_tlb() functions, so last level - * TLBI is sufficient here. - */ - __flush_tlb_range(&vma, tlb->start, tlb->end, true); + __flush_tlb_range(&vma, tlb->start, tlb->end, stride, last_level); } static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, unsigned long addr) { - __flush_tlb_pgtable(tlb->mm, addr); pgtable_page_dtor(pte); - tlb_remove_entry(tlb, pte); + tlb_remove_table(tlb, pte); } #if CONFIG_PGTABLE_LEVELS > 2 static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp, unsigned long addr) { - __flush_tlb_pgtable(tlb->mm, addr); - tlb_remove_entry(tlb, virt_to_page(pmdp)); + tlb_remove_table(tlb, virt_to_page(pmdp)); } #endif @@ -77,8 +70,7 @@ static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp, static inline void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pudp, unsigned long addr) { - __flush_tlb_pgtable(tlb->mm, addr); - tlb_remove_entry(tlb, virt_to_page(pudp)); + tlb_remove_table(tlb, virt_to_page(pudp)); } #endif diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h index a4a1901140ee..c3c0387aee18 100644 --- a/arch/arm64/include/asm/tlbflush.h +++ b/arch/arm64/include/asm/tlbflush.h @@ -70,43 +70,73 @@ }) /* - * TLB Management - * ============== + * TLB Invalidation + * ================ * - * The TLB specific code is expected to perform whatever tests it needs - * to determine if it should invalidate the TLB for each call. Start - * addresses are inclusive and end addresses are exclusive; it is safe to - * round these addresses down. + * This header file implements the low-level TLB invalidation routines + * (sometimes referred to as "flushing" in the kernel) for arm64. * - * flush_tlb_all() + * Every invalidation operation uses the following template: + * + * DSB ISHST // Ensure prior page-table updates have completed + * TLBI ... // Invalidate the TLB + * DSB ISH // Ensure the TLB invalidation has completed + * if (invalidated kernel mappings) + * ISB // Discard any instructions fetched from the old mapping + * + * + * The following functions form part of the "core" TLB invalidation API, + * as documented in Documentation/core-api/cachetlb.rst: * - * Invalidate the entire TLB. + * flush_tlb_all() + * Invalidate the entire TLB (kernel + user) on all CPUs * * flush_tlb_mm(mm) + * Invalidate an entire user address space on all CPUs. + * The 'mm' argument identifies the ASID to invalidate. + * + * flush_tlb_range(vma, start, end) + * Invalidate the virtual-address range '[start, end)' on all + * CPUs for the user address space corresponding to 'vma->mm'. + * Note that this operation also invalidates any walk-cache + * entries associated with translations for the specified address + * range. + * + * flush_tlb_kernel_range(start, end) + * Same as flush_tlb_range(..., start, end), but applies to + * kernel mappings rather than a particular user address space. + * Whilst not explicitly documented, this function is used when + * unmapping pages from vmalloc/io space. + * + * flush_tlb_page(vma, addr) + * Invalidate a single user mapping for address 'addr' in the + * address space corresponding to 'vma->mm'. Note that this + * operation only invalidates a single, last-level page-table + * entry and therefore does not affect any walk-caches. * - * Invalidate all TLB entries in a particular address space. - * - mm - mm_struct describing address space * - * flush_tlb_range(mm,start,end) + * Next, we have some undocumented invalidation routines that you probably + * don't want to call unless you know what you're doing: * - * Invalidate a range of TLB entries in the specified address - * space. - * - mm - mm_struct describing address space - * - start - start address (may not be aligned) - * - end - end address (exclusive, may not be aligned) + * local_flush_tlb_all() + * Same as flush_tlb_all(), but only applies to the calling CPU. * - * flush_tlb_page(vaddr,vma) + * __flush_tlb_kernel_pgtable(addr) + * Invalidate a single kernel mapping for address 'addr' on all + * CPUs, ensuring that any walk-cache entries associated with the + * translation are also invalidated. * - * Invalidate the specified page in the specified address range. - * - vaddr - virtual address (may not be aligned) - * - vma - vma_struct describing address range + * __flush_tlb_range(vma, start, end, stride, last_level) + * Invalidate the virtual-address range '[start, end)' on all + * CPUs for the user address space corresponding to 'vma->mm'. + * The invalidation operations are issued at a granularity + * determined by 'stride' and only affect any walk-cache entries + * if 'last_level' is equal to false. * - * flush_kern_tlb_page(kaddr) * - * Invalidate the TLB entry for the specified page. The address - * will be in the kernels virtual memory space. Current uses - * only require the D-TLB to be invalidated. - * - kaddr - Kernel virtual memory address + * Finally, take a look at asm/tlb.h to see how tlb_flush() is implemented + * on top of these routines, since that is our interface to the mmu_gather + * API as used by munmap() and friends. */ static inline void local_flush_tlb_all(void) { @@ -149,25 +179,28 @@ static inline void flush_tlb_page(struct vm_area_struct *vma, * This is meant to avoid soft lock-ups on large TLB flushing ranges and not * necessarily a performance improvement. */ -#define MAX_TLB_RANGE (1024UL << PAGE_SHIFT) +#define MAX_TLBI_OPS 1024UL static inline void __flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end, - bool last_level) + unsigned long stride, bool last_level) { unsigned long asid = ASID(vma->vm_mm); unsigned long addr; - if ((end - start) > MAX_TLB_RANGE) { + if ((end - start) > (MAX_TLBI_OPS * stride)) { flush_tlb_mm(vma->vm_mm); return; } + /* Convert the stride into units of 4k */ + stride >>= 12; + start = __TLBI_VADDR(start, asid); end = __TLBI_VADDR(end, asid); dsb(ishst); - for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) { + for (addr = start; addr < end; addr += stride) { if (last_level) { __tlbi(vale1is, addr); __tlbi_user(vale1is, addr); @@ -182,14 +215,18 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma, static inline void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { - __flush_tlb_range(vma, start, end, false); + /* + * We cannot use leaf-only invalidation here, since we may be invalidating + * table entries as part of collapsing hugepages or moving page tables. + */ + __flush_tlb_range(vma, start, end, PAGE_SIZE, false); } static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end) { unsigned long addr; - if ((end - start) > MAX_TLB_RANGE) { + if ((end - start) > (MAX_TLBI_OPS * PAGE_SIZE)) { flush_tlb_all(); return; } @@ -199,7 +236,7 @@ static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end dsb(ishst); for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) - __tlbi(vaae1is, addr); + __tlbi(vaale1is, addr); dsb(ish); isb(); } @@ -208,20 +245,11 @@ static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end * Used to invalidate the TLB (walk caches) corresponding to intermediate page * table levels (pgd/pud/pmd). */ -static inline void __flush_tlb_pgtable(struct mm_struct *mm, - unsigned long uaddr) -{ - unsigned long addr = __TLBI_VADDR(uaddr, ASID(mm)); - - __tlbi(vae1is, addr); - __tlbi_user(vae1is, addr); - dsb(ish); -} - static inline void __flush_tlb_kernel_pgtable(unsigned long kaddr) { unsigned long addr = __TLBI_VADDR(kaddr, 0); + dsb(ishst); __tlbi(vaae1is, addr); dsb(ish); } diff --git a/arch/arm64/include/asm/topology.h b/arch/arm64/include/asm/topology.h index 49a0fee4f89b..0524f2438649 100644 --- a/arch/arm64/include/asm/topology.h +++ b/arch/arm64/include/asm/topology.h @@ -45,6 +45,9 @@ int pcibus_to_node(struct pci_bus *bus); /* Replace task scheduler's default cpu-invariant accounting */ #define arch_scale_cpu_capacity topology_get_cpu_scale +/* Enable topology flag updates */ +#define arch_update_cpu_topology topology_update_cpu_topology + #include <asm-generic/topology.h> #endif /* _ASM_ARM_TOPOLOGY_H */ diff --git a/arch/arm64/include/asm/traps.h b/arch/arm64/include/asm/traps.h index c320f3bf6c57..f9c1aa6167d2 100644 --- a/arch/arm64/include/asm/traps.h +++ b/arch/arm64/include/asm/traps.h @@ -37,8 +37,9 @@ void register_undef_hook(struct undef_hook *hook); void unregister_undef_hook(struct undef_hook *hook); void force_signal_inject(int signal, int code, unsigned long address); void arm64_notify_segfault(unsigned long addr); -void arm64_force_sig_info(struct siginfo *info, const char *str, - struct task_struct *tsk); +void arm64_force_sig_fault(int signo, int code, void __user *addr, const char *str); +void arm64_force_sig_mceerr(int code, void __user *addr, short lsb, const char *str); +void arm64_force_sig_ptrace_errno_trap(int errno, void __user *addr, const char *str); /* * Move regs->pc to next instruction and do necessary setup before it diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h index e66b0fca99c2..07c34087bd5e 100644 --- a/arch/arm64/include/asm/uaccess.h +++ b/arch/arm64/include/asm/uaccess.h @@ -32,7 +32,6 @@ #include <asm/cpufeature.h> #include <asm/ptrace.h> #include <asm/memory.h> -#include <asm/compiler.h> #include <asm/extable.h> #define get_ds() (KERNEL_DS) diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h index e0d0f5b856e7..b13ca091f833 100644 --- a/arch/arm64/include/asm/unistd.h +++ b/arch/arm64/include/asm/unistd.h @@ -18,11 +18,11 @@ #define __ARCH_WANT_SYS_GETHOSTNAME #define __ARCH_WANT_SYS_PAUSE #define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK #define __ARCH_WANT_SYS_NICE #define __ARCH_WANT_SYS_SIGPENDING #define __ARCH_WANT_SYS_SIGPROCMASK #define __ARCH_WANT_COMPAT_SYS_SENDFILE +#define __ARCH_WANT_SYS_UTIME32 #define __ARCH_WANT_SYS_FORK #define __ARCH_WANT_SYS_VFORK diff --git a/arch/arm64/include/asm/xen/events.h b/arch/arm64/include/asm/xen/events.h index 4e22b7a8c038..2788e95d0ff0 100644 --- a/arch/arm64/include/asm/xen/events.h +++ b/arch/arm64/include/asm/xen/events.h @@ -14,7 +14,7 @@ enum ipi_vector { static inline int xen_irqs_disabled(struct pt_regs *regs) { - return raw_irqs_disabled_flags((unsigned long) regs->pstate); + return !interrupts_enabled(regs); } #define xchg_xen_ulong(ptr, val) xchg((ptr), (val)) diff --git a/arch/arm64/include/uapi/asm/Kbuild b/arch/arm64/include/uapi/asm/Kbuild index 198afbf0688f..6c5adf458690 100644 --- a/arch/arm64/include/uapi/asm/Kbuild +++ b/arch/arm64/include/uapi/asm/Kbuild @@ -19,3 +19,4 @@ generic-y += swab.h generic-y += termbits.h generic-y += termios.h generic-y += types.h +generic-y += siginfo.h diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h index 17c65c8f33cb..2bcd6e4f3474 100644 --- a/arch/arm64/include/uapi/asm/hwcap.h +++ b/arch/arm64/include/uapi/asm/hwcap.h @@ -48,5 +48,6 @@ #define HWCAP_USCAT (1 << 25) #define HWCAP_ILRCPC (1 << 26) #define HWCAP_FLAGM (1 << 27) +#define HWCAP_SSBS (1 << 28) #endif /* _UAPI__ASM_HWCAP_H */ diff --git a/arch/arm64/include/uapi/asm/ptrace.h b/arch/arm64/include/uapi/asm/ptrace.h index 98c4ce55d9c3..a36227fdb084 100644 --- a/arch/arm64/include/uapi/asm/ptrace.h +++ b/arch/arm64/include/uapi/asm/ptrace.h @@ -46,6 +46,7 @@ #define PSR_I_BIT 0x00000080 #define PSR_A_BIT 0x00000100 #define PSR_D_BIT 0x00000200 +#define PSR_SSBS_BIT 0x00001000 #define PSR_PAN_BIT 0x00400000 #define PSR_UAO_BIT 0x00800000 #define PSR_V_BIT 0x10000000 diff --git a/arch/arm64/include/uapi/asm/siginfo.h b/arch/arm64/include/uapi/asm/siginfo.h deleted file mode 100644 index 574d12f86039..000000000000 --- a/arch/arm64/include/uapi/asm/siginfo.h +++ /dev/null @@ -1,24 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright (C) 2012 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#ifndef __ASM_SIGINFO_H -#define __ASM_SIGINFO_H - -#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) - -#include <asm-generic/siginfo.h> - -#endif diff --git a/arch/arm64/include/uapi/asm/unistd.h b/arch/arm64/include/uapi/asm/unistd.h index 5072cbd15c82..dae1584cf017 100644 --- a/arch/arm64/include/uapi/asm/unistd.h +++ b/arch/arm64/include/uapi/asm/unistd.h @@ -16,5 +16,6 @@ */ #define __ARCH_WANT_RENAMEAT +#define __ARCH_WANT_NEW_STAT #include <asm-generic/unistd.h> diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 95ac7374d723..4c8b13bede80 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -54,6 +54,7 @@ arm64-obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o \ arm64-obj-$(CONFIG_ARM64_RELOC_TEST) += arm64-reloc-test.o arm64-reloc-test-y := reloc_test_core.o reloc_test_syms.o arm64-obj-$(CONFIG_CRASH_DUMP) += crash_dump.o +arm64-obj-$(CONFIG_CRASH_CORE) += crash_core.o arm64-obj-$(CONFIG_ARM_SDE_INTERFACE) += sdei.o arm64-obj-$(CONFIG_ARM64_SSBD) += ssbd.o diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c index ed46dc188b22..44e3c351e1ea 100644 --- a/arch/arm64/kernel/acpi.c +++ b/arch/arm64/kernel/acpi.c @@ -16,7 +16,6 @@ #define pr_fmt(fmt) "ACPI: " fmt #include <linux/acpi.h> -#include <linux/bootmem.h> #include <linux/cpumask.h> #include <linux/efi.h> #include <linux/efi-bgrt.h> diff --git a/arch/arm64/kernel/acpi_numa.c b/arch/arm64/kernel/acpi_numa.c index 4f4f1815e047..eac1d0cc595c 100644 --- a/arch/arm64/kernel/acpi_numa.c +++ b/arch/arm64/kernel/acpi_numa.c @@ -18,7 +18,6 @@ #include <linux/acpi.h> #include <linux/bitmap.h> -#include <linux/bootmem.h> #include <linux/kernel.h> #include <linux/mm.h> #include <linux/memblock.h> diff --git a/arch/arm64/kernel/arm64ksyms.c b/arch/arm64/kernel/arm64ksyms.c index d894a20b70b2..72f63a59b008 100644 --- a/arch/arm64/kernel/arm64ksyms.c +++ b/arch/arm64/kernel/arm64ksyms.c @@ -44,20 +44,23 @@ EXPORT_SYMBOL(__arch_copy_in_user); EXPORT_SYMBOL(memstart_addr); /* string / mem functions */ +#ifndef CONFIG_KASAN EXPORT_SYMBOL(strchr); EXPORT_SYMBOL(strrchr); EXPORT_SYMBOL(strcmp); EXPORT_SYMBOL(strncmp); EXPORT_SYMBOL(strlen); EXPORT_SYMBOL(strnlen); +EXPORT_SYMBOL(memcmp); +EXPORT_SYMBOL(memchr); +#endif + EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(__memset); EXPORT_SYMBOL(__memcpy); EXPORT_SYMBOL(__memmove); -EXPORT_SYMBOL(memchr); -EXPORT_SYMBOL(memcmp); /* atomic bitops */ EXPORT_SYMBOL(set_bit); diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index dec10898d688..a509e35132d2 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -68,21 +68,43 @@ static bool has_mismatched_cache_type(const struct arm64_cpu_capabilities *entry, int scope) { - u64 mask = CTR_CACHE_MINLINE_MASK; - - /* Skip matching the min line sizes for cache type check */ - if (entry->capability == ARM64_MISMATCHED_CACHE_TYPE) - mask ^= arm64_ftr_reg_ctrel0.strict_mask; + u64 mask = arm64_ftr_reg_ctrel0.strict_mask; + u64 sys = arm64_ftr_reg_ctrel0.sys_val & mask; + u64 ctr_raw, ctr_real; WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible()); - return (read_cpuid_cachetype() & mask) != - (arm64_ftr_reg_ctrel0.sys_val & mask); + + /* + * We want to make sure that all the CPUs in the system expose + * a consistent CTR_EL0 to make sure that applications behaves + * correctly with migration. + * + * If a CPU has CTR_EL0.IDC but does not advertise it via CTR_EL0 : + * + * 1) It is safe if the system doesn't support IDC, as CPU anyway + * reports IDC = 0, consistent with the rest. + * + * 2) If the system has IDC, it is still safe as we trap CTR_EL0 + * access on this CPU via the ARM64_HAS_CACHE_IDC capability. + * + * So, we need to make sure either the raw CTR_EL0 or the effective + * CTR_EL0 matches the system's copy to allow a secondary CPU to boot. + */ + ctr_raw = read_cpuid_cachetype() & mask; + ctr_real = read_cpuid_effective_cachetype() & mask; + + return (ctr_real != sys) && (ctr_raw != sys); } static void cpu_enable_trap_ctr_access(const struct arm64_cpu_capabilities *__unused) { - sysreg_clear_set(sctlr_el1, SCTLR_EL1_UCT, 0); + u64 mask = arm64_ftr_reg_ctrel0.strict_mask; + + /* Trap CTR_EL0 access on this CPU, only if it has a mismatch */ + if ((read_cpuid_cachetype() & mask) != + (arm64_ftr_reg_ctrel0.sys_val & mask)) + sysreg_clear_set(sctlr_el1, SCTLR_EL1_UCT, 0); } atomic_t arm64_el2_vector_last_slot = ATOMIC_INIT(-1); @@ -116,6 +138,15 @@ static void __install_bp_hardening_cb(bp_hardening_cb_t fn, static DEFINE_SPINLOCK(bp_lock); int cpu, slot = -1; + /* + * enable_smccc_arch_workaround_1() passes NULL for the hyp_vecs + * start/end if we're a guest. Skip the hyp-vectors work. + */ + if (!hyp_vecs_start) { + __this_cpu_write(bp_hardening_data.fn, fn); + return; + } + spin_lock(&bp_lock); for_each_possible_cpu(cpu) { if (per_cpu(bp_hardening_data.fn, cpu) == fn) { @@ -312,6 +343,14 @@ void __init arm64_enable_wa2_handling(struct alt_instr *alt, void arm64_set_ssbd_mitigation(bool state) { + if (this_cpu_has_cap(ARM64_SSBS)) { + if (state) + asm volatile(SET_PSTATE_SSBS(0)); + else + asm volatile(SET_PSTATE_SSBS(1)); + return; + } + switch (psci_ops.conduit) { case PSCI_CONDUIT_HVC: arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_WORKAROUND_2, state, NULL); @@ -336,6 +375,11 @@ static bool has_ssbd_mitigation(const struct arm64_cpu_capabilities *entry, WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible()); + if (this_cpu_has_cap(ARM64_SSBS)) { + required = false; + goto out_printmsg; + } + if (psci_ops.smccc_version == SMCCC_VERSION_1_0) { ssbd_state = ARM64_SSBD_UNKNOWN; return false; @@ -384,7 +428,6 @@ static bool has_ssbd_mitigation(const struct arm64_cpu_capabilities *entry, switch (ssbd_state) { case ARM64_SSBD_FORCE_DISABLE: - pr_info_once("%s disabled from command-line\n", entry->desc); arm64_set_ssbd_mitigation(false); required = false; break; @@ -397,7 +440,6 @@ static bool has_ssbd_mitigation(const struct arm64_cpu_capabilities *entry, break; case ARM64_SSBD_FORCE_ENABLE: - pr_info_once("%s forced from command-line\n", entry->desc); arm64_set_ssbd_mitigation(true); required = true; break; @@ -407,10 +449,27 @@ static bool has_ssbd_mitigation(const struct arm64_cpu_capabilities *entry, break; } +out_printmsg: + switch (ssbd_state) { + case ARM64_SSBD_FORCE_DISABLE: + pr_info_once("%s disabled from command-line\n", entry->desc); + break; + + case ARM64_SSBD_FORCE_ENABLE: + pr_info_once("%s forced from command-line\n", entry->desc); + break; + } + return required; } #endif /* CONFIG_ARM64_SSBD */ +static void __maybe_unused +cpu_enable_cache_maint_trap(const struct arm64_cpu_capabilities *__unused) +{ + sysreg_clear_set(sctlr_el1, SCTLR_EL1_UCI, 0); +} + #define CAP_MIDR_RANGE(model, v_min, r_min, v_max, r_max) \ .matches = is_affected_midr_range, \ .midr_range = MIDR_RANGE(model, v_min, r_min, v_max, r_max) @@ -616,14 +675,7 @@ const struct arm64_cpu_capabilities arm64_errata[] = { }, #endif { - .desc = "Mismatched cache line size", - .capability = ARM64_MISMATCHED_CACHE_LINE_SIZE, - .matches = has_mismatched_cache_type, - .type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM, - .cpu_enable = cpu_enable_trap_ctr_access, - }, - { - .desc = "Mismatched cache type", + .desc = "Mismatched cache type (CTR_EL0)", .capability = ARM64_MISMATCHED_CACHE_TYPE, .matches = has_mismatched_cache_type, .type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM, @@ -680,6 +732,14 @@ const struct arm64_cpu_capabilities arm64_errata[] = { .matches = has_ssbd_mitigation, }, #endif +#ifdef CONFIG_ARM64_ERRATUM_1188873 + { + /* Cortex-A76 r0p0 to r2p0 */ + .desc = "ARM erratum 1188873", + .capability = ARM64_WORKAROUND_1188873, + ERRATA_MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 2, 0), + }, +#endif { } }; diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index e238b7932096..af50064dea51 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -20,6 +20,7 @@ #include <linux/bsearch.h> #include <linux/cpumask.h> +#include <linux/crash_dump.h> #include <linux/sort.h> #include <linux/stop_machine.h> #include <linux/types.h> @@ -117,6 +118,7 @@ EXPORT_SYMBOL(cpu_hwcap_keys); static bool __maybe_unused cpufeature_pan_not_uao(const struct arm64_cpu_capabilities *entry, int __unused); +static void cpu_enable_cnp(struct arm64_cpu_capabilities const *cap); /* * NOTE: Any changes to the visibility of features should be kept in @@ -164,6 +166,11 @@ static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = { ARM64_FTR_END, }; +static const struct arm64_ftr_bits ftr_id_aa64pfr1[] = { + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_SSBS_SHIFT, 4, ID_AA64PFR1_SSBS_PSTATE_NI), + ARM64_FTR_END, +}; + static const struct arm64_ftr_bits ftr_id_aa64mmfr0[] = { S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN4_SHIFT, 4, ID_AA64MMFR0_TGRAN4_NI), S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN64_SHIFT, 4, ID_AA64MMFR0_TGRAN64_NI), @@ -371,7 +378,7 @@ static const struct __ftr_reg_entry { /* Op1 = 0, CRn = 0, CRm = 4 */ ARM64_FTR_REG(SYS_ID_AA64PFR0_EL1, ftr_id_aa64pfr0), - ARM64_FTR_REG(SYS_ID_AA64PFR1_EL1, ftr_raz), + ARM64_FTR_REG(SYS_ID_AA64PFR1_EL1, ftr_id_aa64pfr1), ARM64_FTR_REG(SYS_ID_AA64ZFR0_EL1, ftr_raz), /* Op1 = 0, CRn = 0, CRm = 5 */ @@ -657,7 +664,6 @@ void update_cpu_features(int cpu, /* * EL3 is not our concern. - * ID_AA64PFR1 is currently RES0. */ taint |= check_update_ftr_reg(SYS_ID_AA64PFR0_EL1, cpu, info->reg_id_aa64pfr0, boot->reg_id_aa64pfr0); @@ -848,15 +854,55 @@ static bool has_no_fpsimd(const struct arm64_cpu_capabilities *entry, int __unus } static bool has_cache_idc(const struct arm64_cpu_capabilities *entry, - int __unused) + int scope) { - return read_sanitised_ftr_reg(SYS_CTR_EL0) & BIT(CTR_IDC_SHIFT); + u64 ctr; + + if (scope == SCOPE_SYSTEM) + ctr = arm64_ftr_reg_ctrel0.sys_val; + else + ctr = read_cpuid_effective_cachetype(); + + return ctr & BIT(CTR_IDC_SHIFT); +} + +static void cpu_emulate_effective_ctr(const struct arm64_cpu_capabilities *__unused) +{ + /* + * If the CPU exposes raw CTR_EL0.IDC = 0, while effectively + * CTR_EL0.IDC = 1 (from CLIDR values), we need to trap accesses + * to the CTR_EL0 on this CPU and emulate it with the real/safe + * value. + */ + if (!(read_cpuid_cachetype() & BIT(CTR_IDC_SHIFT))) + sysreg_clear_set(sctlr_el1, SCTLR_EL1_UCT, 0); } static bool has_cache_dic(const struct arm64_cpu_capabilities *entry, - int __unused) + int scope) { - return read_sanitised_ftr_reg(SYS_CTR_EL0) & BIT(CTR_DIC_SHIFT); + u64 ctr; + + if (scope == SCOPE_SYSTEM) + ctr = arm64_ftr_reg_ctrel0.sys_val; + else + ctr = read_cpuid_cachetype(); + + return ctr & BIT(CTR_DIC_SHIFT); +} + +static bool __maybe_unused +has_useable_cnp(const struct arm64_cpu_capabilities *entry, int scope) +{ + /* + * Kdump isn't guaranteed to power-off all secondary CPUs, CNP + * may share TLB entries with a CPU stuck in the crashed + * kernel. + */ + if (is_kdump_kernel()) + return false; + + return has_cpuid_feature(entry, scope); } #ifdef CONFIG_UNMAP_KERNEL_AT_EL0 @@ -1035,6 +1081,70 @@ static void cpu_has_fwb(const struct arm64_cpu_capabilities *__unused) WARN_ON(val & (7 << 27 | 7 << 21)); } +#ifdef CONFIG_ARM64_SSBD +static int ssbs_emulation_handler(struct pt_regs *regs, u32 instr) +{ + if (user_mode(regs)) + return 1; + + if (instr & BIT(PSTATE_Imm_shift)) + regs->pstate |= PSR_SSBS_BIT; + else + regs->pstate &= ~PSR_SSBS_BIT; + + arm64_skip_faulting_instruction(regs, 4); + return 0; +} + +static struct undef_hook ssbs_emulation_hook = { + .instr_mask = ~(1U << PSTATE_Imm_shift), + .instr_val = 0xd500401f | PSTATE_SSBS, + .fn = ssbs_emulation_handler, +}; + +static void cpu_enable_ssbs(const struct arm64_cpu_capabilities *__unused) +{ + static bool undef_hook_registered = false; + static DEFINE_SPINLOCK(hook_lock); + + spin_lock(&hook_lock); + if (!undef_hook_registered) { + register_undef_hook(&ssbs_emulation_hook); + undef_hook_registered = true; + } + spin_unlock(&hook_lock); + + if (arm64_get_ssbd_state() == ARM64_SSBD_FORCE_DISABLE) { + sysreg_clear_set(sctlr_el1, 0, SCTLR_ELx_DSSBS); + arm64_set_ssbd_mitigation(false); + } else { + arm64_set_ssbd_mitigation(true); + } +} +#endif /* CONFIG_ARM64_SSBD */ + +#ifdef CONFIG_ARM64_PAN +static void cpu_enable_pan(const struct arm64_cpu_capabilities *__unused) +{ + /* + * We modify PSTATE. This won't work from irq context as the PSTATE + * is discarded once we return from the exception. + */ + WARN_ON_ONCE(in_interrupt()); + + sysreg_clear_set(sctlr_el1, SCTLR_EL1_SPAN, 0); + asm(SET_PSTATE_PAN(1)); +} +#endif /* CONFIG_ARM64_PAN */ + +#ifdef CONFIG_ARM64_RAS_EXTN +static void cpu_clear_disr(const struct arm64_cpu_capabilities *__unused) +{ + /* Firmware may have left a deferred SError in this register. */ + write_sysreg_s(0, SYS_DISR_EL1); +} +#endif /* CONFIG_ARM64_RAS_EXTN */ + static const struct arm64_cpu_capabilities arm64_features[] = { { .desc = "GIC system register CPU interface", @@ -1184,6 +1294,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .capability = ARM64_HAS_CACHE_IDC, .type = ARM64_CPUCAP_SYSTEM_FEATURE, .matches = has_cache_idc, + .cpu_enable = cpu_emulate_effective_ctr, }, { .desc = "Instruction cache invalidation not required for I/D coherence", @@ -1222,6 +1333,41 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .cpu_enable = cpu_enable_hw_dbm, }, #endif +#ifdef CONFIG_ARM64_SSBD + { + .desc = "CRC32 instructions", + .capability = ARM64_HAS_CRC32, + .type = ARM64_CPUCAP_SYSTEM_FEATURE, + .matches = has_cpuid_feature, + .sys_reg = SYS_ID_AA64ISAR0_EL1, + .field_pos = ID_AA64ISAR0_CRC32_SHIFT, + .min_field_value = 1, + }, + { + .desc = "Speculative Store Bypassing Safe (SSBS)", + .capability = ARM64_SSBS, + .type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE, + .matches = has_cpuid_feature, + .sys_reg = SYS_ID_AA64PFR1_EL1, + .field_pos = ID_AA64PFR1_SSBS_SHIFT, + .sign = FTR_UNSIGNED, + .min_field_value = ID_AA64PFR1_SSBS_PSTATE_ONLY, + .cpu_enable = cpu_enable_ssbs, + }, +#endif +#ifdef CONFIG_ARM64_CNP + { + .desc = "Common not Private translations", + .capability = ARM64_HAS_CNP, + .type = ARM64_CPUCAP_SYSTEM_FEATURE, + .matches = has_useable_cnp, + .sys_reg = SYS_ID_AA64MMFR2_EL1, + .sign = FTR_UNSIGNED, + .field_pos = ID_AA64MMFR2_CNP_SHIFT, + .min_field_value = 1, + .cpu_enable = cpu_enable_cnp, + }, +#endif {}, }; @@ -1267,6 +1413,7 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = { #ifdef CONFIG_ARM64_SVE HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_SVE_SHIFT, FTR_UNSIGNED, ID_AA64PFR0_SVE, CAP_HWCAP, HWCAP_SVE), #endif + HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_SSBS_SHIFT, FTR_UNSIGNED, ID_AA64PFR1_SSBS_PSTATE_INSNS, CAP_HWCAP, HWCAP_SSBS), {}, }; @@ -1658,6 +1805,11 @@ cpufeature_pan_not_uao(const struct arm64_cpu_capabilities *entry, int __unused) return (cpus_have_const_cap(ARM64_HAS_PAN) && !cpus_have_const_cap(ARM64_HAS_UAO)); } +static void __maybe_unused cpu_enable_cnp(struct arm64_cpu_capabilities const *cap) +{ + cpu_replace_ttbr1(lm_alias(swapper_pg_dir)); +} + /* * We emulate only the following system register space. * Op0 = 0x3, CRn = 0x0, Op1 = 0x0, CRm = [0, 4 - 7] @@ -1719,27 +1871,32 @@ static int emulate_sys_reg(u32 id, u64 *valp) return 0; } -static int emulate_mrs(struct pt_regs *regs, u32 insn) +int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt) { int rc; - u32 sys_reg, dst; u64 val; - /* - * sys_reg values are defined as used in mrs/msr instruction. - * shift the imm value to get the encoding. - */ - sys_reg = (u32)aarch64_insn_decode_immediate(AARCH64_INSN_IMM_16, insn) << 5; rc = emulate_sys_reg(sys_reg, &val); if (!rc) { - dst = aarch64_insn_decode_register(AARCH64_INSN_REGTYPE_RT, insn); - pt_regs_write_reg(regs, dst, val); + pt_regs_write_reg(regs, rt, val); arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE); } - return rc; } +static int emulate_mrs(struct pt_regs *regs, u32 insn) +{ + u32 sys_reg, rt; + + /* + * sys_reg values are defined as used in mrs/msr instruction. + * shift the imm value to get the encoding. + */ + sys_reg = (u32)aarch64_insn_decode_immediate(AARCH64_INSN_IMM_16, insn) << 5; + rt = aarch64_insn_decode_register(AARCH64_INSN_REGTYPE_RT, insn); + return do_emulate_mrs(regs, sys_reg, rt); +} + static struct undef_hook mrs_hook = { .instr_mask = 0xfff00000, .instr_val = 0xd5300000, @@ -1755,9 +1912,3 @@ static int __init enable_mrs_emulation(void) } core_initcall(enable_mrs_emulation); - -void cpu_clear_disr(const struct arm64_cpu_capabilities *__unused) -{ - /* Firmware may have left a deferred SError in this register. */ - write_sysreg_s(0, SYS_DISR_EL1); -} diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c index e9ab7b3ed317..bcc2831399cb 100644 --- a/arch/arm64/kernel/cpuinfo.c +++ b/arch/arm64/kernel/cpuinfo.c @@ -81,6 +81,7 @@ static const char *const hwcap_str[] = { "uscat", "ilrcpc", "flagm", + "ssbs", NULL }; @@ -324,7 +325,15 @@ static void cpuinfo_detect_icache_policy(struct cpuinfo_arm64 *info) static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info) { info->reg_cntfrq = arch_timer_get_cntfrq(); - info->reg_ctr = read_cpuid_cachetype(); + /* + * Use the effective value of the CTR_EL0 than the raw value + * exposed by the CPU. CTR_E0.IDC field value must be interpreted + * with the CLIDR_EL1 fields to avoid triggering false warnings + * when there is a mismatch across the CPUs. Keep track of the + * effective value of the CTR_EL0 in our internal records for + * acurate sanity check and feature enablement. + */ + info->reg_ctr = read_cpuid_effective_cachetype(); info->reg_dczid = read_cpuid(DCZID_EL0); info->reg_midr = read_cpuid_id(); info->reg_revidr = read_cpuid(REVIDR_EL1); diff --git a/arch/arm64/kernel/crash_core.c b/arch/arm64/kernel/crash_core.c new file mode 100644 index 000000000000..ca4c3e12d8c5 --- /dev/null +++ b/arch/arm64/kernel/crash_core.c @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) Linaro. + * Copyright (C) Huawei Futurewei Technologies. + */ + +#include <linux/crash_core.h> +#include <asm/memory.h> + +void arch_crash_save_vmcoreinfo(void) +{ + VMCOREINFO_NUMBER(VA_BITS); + /* Please note VMCOREINFO_NUMBER() uses "%d", not "%x" */ + vmcoreinfo_append_str("NUMBER(kimage_voffset)=0x%llx\n", + kimage_voffset); + vmcoreinfo_append_str("NUMBER(PHYS_OFFSET)=0x%llx\n", + PHYS_OFFSET); + vmcoreinfo_append_str("KERNELOFFSET=%lx\n", kaslr_offset()); +} diff --git a/arch/arm64/kernel/crash_dump.c b/arch/arm64/kernel/crash_dump.c index f46d57c31443..6b5037ed15b2 100644 --- a/arch/arm64/kernel/crash_dump.c +++ b/arch/arm64/kernel/crash_dump.c @@ -58,7 +58,7 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, /** * elfcorehdr_read - read from ELF core header * @buf: buffer where the data is placed - * @csize: number of bytes to read + * @count: number of bytes to read * @ppos: address in the memory * * This function reads @count bytes from elf core header which exists diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index 06ca574495af..d7bb6aefae0a 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -210,13 +210,6 @@ NOKPROBE_SYMBOL(call_step_hook); static void send_user_sigtrap(int si_code) { struct pt_regs *regs = current_pt_regs(); - siginfo_t info; - - clear_siginfo(&info); - info.si_signo = SIGTRAP; - info.si_errno = 0; - info.si_code = si_code; - info.si_addr = (void __user *)instruction_pointer(regs); if (WARN_ON(!user_mode(regs))) return; @@ -224,7 +217,9 @@ static void send_user_sigtrap(int si_code) if (interrupts_enabled(regs)) local_irq_enable(); - arm64_force_sig_info(&info, "User debug trap", current); + arm64_force_sig_fault(SIGTRAP, si_code, + (void __user *)instruction_pointer(regs), + "User debug trap"); } static int single_step_handler(unsigned long addr, unsigned int esr, diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index 09dbea221a27..039144ecbcb2 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -589,7 +589,7 @@ el1_undef: inherit_daif pstate=x23, tmp=x2 mov x0, sp bl do_undefinstr - ASM_BUG() + kernel_exit 1 el1_dbg: /* * Debug exception handling @@ -665,6 +665,7 @@ el0_sync: cmp x24, #ESR_ELx_EC_FP_EXC64 // FP/ASIMD exception b.eq el0_fpsimd_exc cmp x24, #ESR_ELx_EC_SYS64 // configurable trap + ccmp x24, #ESR_ELx_EC_WFx, #4, ne b.eq el0_sys cmp x24, #ESR_ELx_EC_SP_ALIGN // stack alignment exception b.eq el0_sp_pc @@ -697,9 +698,9 @@ el0_sync_compat: cmp x24, #ESR_ELx_EC_UNKNOWN // unknown exception in EL0 b.eq el0_undef cmp x24, #ESR_ELx_EC_CP15_32 // CP15 MRC/MCR trap - b.eq el0_undef + b.eq el0_cp15 cmp x24, #ESR_ELx_EC_CP15_64 // CP15 MRRC/MCRR trap - b.eq el0_undef + b.eq el0_cp15 cmp x24, #ESR_ELx_EC_CP14_MR // CP14 MRC/MCR trap b.eq el0_undef cmp x24, #ESR_ELx_EC_CP14_LS // CP14 LDC/STC trap @@ -722,6 +723,17 @@ el0_irq_compat: el0_error_compat: kernel_entry 0, 32 b el0_error_naked + +el0_cp15: + /* + * Trapped CP15 (MRC, MCR, MRRC, MCRR) instructions + */ + enable_daif + ct_user_exit + mov x0, x25 + mov x1, sp + bl do_cp15instr + b ret_to_user #endif el0_da: diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index 58c53bc96928..5ebe73b69961 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -842,7 +842,6 @@ asmlinkage void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs) */ asmlinkage void do_fpsimd_exc(unsigned int esr, struct pt_regs *regs) { - siginfo_t info; unsigned int si_code = FPE_FLTUNK; if (esr & ESR_ELx_FP_EXC_TFV) { @@ -858,12 +857,9 @@ asmlinkage void do_fpsimd_exc(unsigned int esr, struct pt_regs *regs) si_code = FPE_FLTRES; } - clear_siginfo(&info); - info.si_signo = SIGFPE; - info.si_code = si_code; - info.si_addr = (void __user *)instruction_pointer(regs); - - send_sig_info(SIGFPE, &info, current); + send_sig_fault(SIGFPE, si_code, + (void __user *)instruction_pointer(regs), + current); } void fpsimd_thread_switch(struct task_struct *next) diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index b0853069702f..4471f570a295 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -287,19 +287,21 @@ __create_page_tables: mov x28, lr /* - * Invalidate the idmap and swapper page tables to avoid potential - * dirty cache lines being evicted. + * Invalidate the init page tables to avoid potential dirty cache lines + * being evicted. Other page tables are allocated in rodata as part of + * the kernel image, and thus are clean to the PoC per the boot + * protocol. */ - adrp x0, idmap_pg_dir - adrp x1, swapper_pg_end + adrp x0, init_pg_dir + adrp x1, init_pg_end sub x1, x1, x0 bl __inval_dcache_area /* - * Clear the idmap and swapper page tables. + * Clear the init page tables. */ - adrp x0, idmap_pg_dir - adrp x1, swapper_pg_end + adrp x0, init_pg_dir + adrp x1, init_pg_end sub x1, x1, x0 1: stp xzr, xzr, [x0], #16 stp xzr, xzr, [x0], #16 @@ -373,7 +375,7 @@ __create_page_tables: /* * Map the kernel image (starting with PHYS_OFFSET). */ - adrp x0, swapper_pg_dir + adrp x0, init_pg_dir mov_q x5, KIMAGE_VADDR + TEXT_OFFSET // compile time __va(_text) add x5, x5, x23 // add KASLR displacement mov x4, PTRS_PER_PGD @@ -390,7 +392,7 @@ __create_page_tables: * tables again to remove any speculatively loaded cache lines. */ adrp x0, idmap_pg_dir - adrp x1, swapper_pg_end + adrp x1, init_pg_end sub x1, x1, x0 dmb sy bl __inval_dcache_area @@ -706,6 +708,7 @@ secondary_startup: * Common entry point for secondary CPUs. */ bl __cpu_setup // initialise processor + adrp x1, swapper_pg_dir bl __enable_mmu ldr x8, =__secondary_switched br x8 @@ -748,6 +751,7 @@ ENDPROC(__secondary_switched) * Enable the MMU. * * x0 = SCTLR_EL1 value for turning on the MMU. + * x1 = TTBR1_EL1 value * * Returns to the caller via x30/lr. This requires the caller to be covered * by the .idmap.text section. @@ -756,17 +760,16 @@ ENDPROC(__secondary_switched) * If it isn't, park the CPU */ ENTRY(__enable_mmu) - mrs x1, ID_AA64MMFR0_EL1 - ubfx x2, x1, #ID_AA64MMFR0_TGRAN_SHIFT, 4 + mrs x2, ID_AA64MMFR0_EL1 + ubfx x2, x2, #ID_AA64MMFR0_TGRAN_SHIFT, 4 cmp x2, #ID_AA64MMFR0_TGRAN_SUPPORTED b.ne __no_granule_support - update_early_cpu_boot_status 0, x1, x2 - adrp x1, idmap_pg_dir - adrp x2, swapper_pg_dir - phys_to_ttbr x3, x1 - phys_to_ttbr x4, x2 - msr ttbr0_el1, x3 // load TTBR0 - msr ttbr1_el1, x4 // load TTBR1 + update_early_cpu_boot_status 0, x2, x3 + adrp x2, idmap_pg_dir + phys_to_ttbr x1, x1 + phys_to_ttbr x2, x2 + msr ttbr0_el1, x2 // load TTBR0 + msr ttbr1_el1, x1 // load TTBR1 isb msr sctlr_el1, x0 isb @@ -823,6 +826,7 @@ __primary_switch: mrs x20, sctlr_el1 // preserve old SCTLR_EL1 value #endif + adrp x1, init_pg_dir bl __enable_mmu #ifdef CONFIG_RELOCATABLE bl __relocate_kernel diff --git a/arch/arm64/kernel/jump_label.c b/arch/arm64/kernel/jump_label.c index e0756416e567..646b9562ee64 100644 --- a/arch/arm64/kernel/jump_label.c +++ b/arch/arm64/kernel/jump_label.c @@ -25,12 +25,12 @@ void arch_jump_label_transform(struct jump_entry *entry, enum jump_label_type type) { - void *addr = (void *)entry->code; + void *addr = (void *)jump_entry_code(entry); u32 insn; if (type == JUMP_LABEL_JMP) { - insn = aarch64_insn_gen_branch_imm(entry->code, - entry->target, + insn = aarch64_insn_gen_branch_imm(jump_entry_code(entry), + jump_entry_target(entry), AARCH64_INSN_BRANCH_NOLINK); } else { insn = aarch64_insn_gen_nop(); diff --git a/arch/arm64/kernel/machine_kexec.c b/arch/arm64/kernel/machine_kexec.c index f6a5c6bc1434..922add8adb74 100644 --- a/arch/arm64/kernel/machine_kexec.c +++ b/arch/arm64/kernel/machine_kexec.c @@ -358,14 +358,3 @@ void crash_free_reserved_phys_range(unsigned long begin, unsigned long end) } } #endif /* CONFIG_HIBERNATION */ - -void arch_crash_save_vmcoreinfo(void) -{ - VMCOREINFO_NUMBER(VA_BITS); - /* Please note VMCOREINFO_NUMBER() uses "%d", not "%x" */ - vmcoreinfo_append_str("NUMBER(kimage_voffset)=0x%llx\n", - kimage_voffset); - vmcoreinfo_append_str("NUMBER(PHYS_OFFSET)=0x%llx\n", - PHYS_OFFSET); - vmcoreinfo_append_str("KERNELOFFSET=%lx\n", kaslr_offset()); -} diff --git a/arch/arm64/kernel/paravirt.c b/arch/arm64/kernel/paravirt.c index 53f371ed4568..75c158b0353f 100644 --- a/arch/arm64/kernel/paravirt.c +++ b/arch/arm64/kernel/paravirt.c @@ -21,5 +21,5 @@ struct static_key paravirt_steal_enabled; struct static_key paravirt_steal_rq_enabled; -struct pv_time_ops pv_time_ops; -EXPORT_SYMBOL_GPL(pv_time_ops); +struct paravirt_patch_template pv_ops; +EXPORT_SYMBOL_GPL(pv_ops); diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c index 0e2ea1c78542..bb85e2f4603f 100644 --- a/arch/arm64/kernel/pci.c +++ b/arch/arm64/kernel/pci.c @@ -165,16 +165,15 @@ static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci) /* Interface called from ACPI code to setup PCI host controller */ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root) { - int node = acpi_get_node(root->device->handle); struct acpi_pci_generic_root_info *ri; struct pci_bus *bus, *child; struct acpi_pci_root_ops *root_ops; - ri = kzalloc_node(sizeof(*ri), GFP_KERNEL, node); + ri = kzalloc(sizeof(*ri), GFP_KERNEL); if (!ri) return NULL; - root_ops = kzalloc_node(sizeof(*root_ops), GFP_KERNEL, node); + root_ops = kzalloc(sizeof(*root_ops), GFP_KERNEL); if (!root_ops) { kfree(ri); return NULL; diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c index 8e38d5267f22..e213f8e867f6 100644 --- a/arch/arm64/kernel/perf_event.c +++ b/arch/arm64/kernel/perf_event.c @@ -966,6 +966,12 @@ static int armv8pmu_set_event_filter(struct hw_perf_event *event, return 0; } +static int armv8pmu_filter_match(struct perf_event *event) +{ + unsigned long evtype = event->hw.config_base & ARMV8_PMU_EVTYPE_EVENT; + return evtype != ARMV8_PMUV3_PERFCTR_CHAIN; +} + static void armv8pmu_reset(void *info) { struct arm_pmu *cpu_pmu = (struct arm_pmu *)info; @@ -1114,6 +1120,7 @@ static int armv8_pmu_init(struct arm_pmu *cpu_pmu) cpu_pmu->stop = armv8pmu_stop, cpu_pmu->reset = armv8pmu_reset, cpu_pmu->set_event_filter = armv8pmu_set_event_filter; + cpu_pmu->filter_match = armv8pmu_filter_match; return 0; } diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c index e78c3ef04d95..2a5b338b2542 100644 --- a/arch/arm64/kernel/probes/kprobes.c +++ b/arch/arm64/kernel/probes/kprobes.c @@ -23,7 +23,9 @@ #include <linux/slab.h> #include <linux/stop_machine.h> #include <linux/sched/debug.h> +#include <linux/set_memory.h> #include <linux/stringify.h> +#include <linux/vmalloc.h> #include <asm/traps.h> #include <asm/ptrace.h> #include <asm/cacheflush.h> @@ -42,10 +44,21 @@ DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); static void __kprobes post_kprobe_handler(struct kprobe_ctlblk *, struct pt_regs *); +static int __kprobes patch_text(kprobe_opcode_t *addr, u32 opcode) +{ + void *addrs[1]; + u32 insns[1]; + + addrs[0] = addr; + insns[0] = opcode; + + return aarch64_insn_patch_text(addrs, insns, 1); +} + static void __kprobes arch_prepare_ss_slot(struct kprobe *p) { /* prepare insn slot */ - p->ainsn.api.insn[0] = cpu_to_le32(p->opcode); + patch_text(p->ainsn.api.insn, p->opcode); flush_icache_range((uintptr_t) (p->ainsn.api.insn), (uintptr_t) (p->ainsn.api.insn) + @@ -107,7 +120,7 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) if (!p->ainsn.api.insn) return -ENOMEM; break; - }; + } /* prepare the instruction */ if (p->ainsn.api.insn) @@ -118,15 +131,15 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) return 0; } -static int __kprobes patch_text(kprobe_opcode_t *addr, u32 opcode) +void *alloc_insn_page(void) { - void *addrs[1]; - u32 insns[1]; + void *page; - addrs[0] = (void *)addr; - insns[0] = (u32)opcode; + page = vmalloc_exec(PAGE_SIZE); + if (page) + set_memory_ro((unsigned long)page, 1); - return aarch64_insn_patch_text(addrs, insns, 1); + return page; } /* arm kprobe: install breakpoint in text */ diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index 7f1628effe6d..d9a4c2d6dd8b 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -358,6 +358,10 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start, if (IS_ENABLED(CONFIG_ARM64_UAO) && cpus_have_const_cap(ARM64_HAS_UAO)) childregs->pstate |= PSR_UAO_BIT; + + if (arm64_get_ssbd_state() == ARM64_SSBD_FORCE_DISABLE) + childregs->pstate |= PSR_SSBS_BIT; + p->thread.cpu_context.x19 = stack_start; p->thread.cpu_context.x20 = stk_sz; } @@ -493,25 +497,3 @@ void arch_setup_new_exec(void) { current->mm->context.flags = is_compat_task() ? MMCF_AARCH32 : 0; } - -#ifdef CONFIG_GCC_PLUGIN_STACKLEAK -void __used stackleak_check_alloca(unsigned long size) -{ - unsigned long stack_left; - unsigned long current_sp = current_stack_pointer; - struct stack_info info; - - BUG_ON(!on_accessible_stack(current, current_sp, &info)); - - stack_left = current_sp - info.low; - - /* - * There's a good chance we're almost out of stack space if this - * is true. Using panic() over BUG() is more likely to give - * reliable debugging output. - */ - if (size >= stack_left) - panic("alloca() over the kernel stack boundary\n"); -} -EXPORT_SYMBOL(stackleak_check_alloca); -#endif diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c index e8edbf13302a..8cdaf25e99cd 100644 --- a/arch/arm64/kernel/psci.c +++ b/arch/arm64/kernel/psci.c @@ -24,7 +24,6 @@ #include <uapi/linux/psci.h> -#include <asm/compiler.h> #include <asm/cpu_ops.h> #include <asm/errno.h> #include <asm/smp_plat.h> diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 6219486fa25f..1710a2d01669 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -182,13 +182,7 @@ static void ptrace_hbptriggered(struct perf_event *bp, struct pt_regs *regs) { struct arch_hw_breakpoint *bkpt = counter_arch_bp(bp); - siginfo_t info; - - clear_siginfo(&info); - info.si_signo = SIGTRAP; - info.si_errno = 0; - info.si_code = TRAP_HWBKPT; - info.si_addr = (void __user *)(bkpt->trigger); + const char *desc = "Hardware breakpoint trap (ptrace)"; #ifdef CONFIG_COMPAT if (is_compat_task()) { @@ -208,10 +202,14 @@ static void ptrace_hbptriggered(struct perf_event *bp, break; } } - force_sig_ptrace_errno_trap(si_errno, (void __user *)bkpt->trigger); + arm64_force_sig_ptrace_errno_trap(si_errno, + (void __user *)bkpt->trigger, + desc); } #endif - arm64_force_sig_info(&info, "Hardware breakpoint trap (ptrace)", current); + arm64_force_sig_fault(SIGTRAP, TRAP_HWBKPT, + (void __user *)(bkpt->trigger), + desc); } /* diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 5b4fac434c84..953e316521fc 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -26,7 +26,6 @@ #include <linux/initrd.h> #include <linux/console.h> #include <linux/cache.h> -#include <linux/bootmem.h> #include <linux/screen_info.h> #include <linux/init.h> #include <linux/kexec.h> @@ -64,6 +63,9 @@ #include <asm/xen/hypervisor.h> #include <asm/mmu_context.h> +static int num_standard_resources; +static struct resource *standard_resources; + phys_addr_t __fdt_pointer __initdata; /* @@ -206,14 +208,20 @@ static void __init request_standard_resources(void) { struct memblock_region *region; struct resource *res; + unsigned long i = 0; kernel_code.start = __pa_symbol(_text); kernel_code.end = __pa_symbol(__init_begin - 1); kernel_data.start = __pa_symbol(_sdata); kernel_data.end = __pa_symbol(_end - 1); + num_standard_resources = memblock.memory.cnt; + standard_resources = memblock_alloc_low(num_standard_resources * + sizeof(*standard_resources), + SMP_CACHE_BYTES); + for_each_memblock(memory, region) { - res = alloc_bootmem_low(sizeof(*res)); + res = &standard_resources[i++]; if (memblock_is_nomap(region)) { res->name = "reserved"; res->flags = IORESOURCE_MEM; @@ -243,36 +251,26 @@ static void __init request_standard_resources(void) static int __init reserve_memblock_reserved_regions(void) { - phys_addr_t start, end, roundup_end = 0; - struct resource *mem, *res; - u64 i; - - for_each_reserved_mem_region(i, &start, &end) { - if (end <= roundup_end) - continue; /* done already */ - - start = __pfn_to_phys(PFN_DOWN(start)); - end = __pfn_to_phys(PFN_UP(end)) - 1; - roundup_end = end; - - res = kzalloc(sizeof(*res), GFP_ATOMIC); - if (WARN_ON(!res)) - return -ENOMEM; - res->start = start; - res->end = end; - res->name = "reserved"; - res->flags = IORESOURCE_MEM; - - mem = request_resource_conflict(&iomem_resource, res); - /* - * We expected memblock_reserve() regions to conflict with - * memory created by request_standard_resources(). - */ - if (WARN_ON_ONCE(!mem)) + u64 i, j; + + for (i = 0; i < num_standard_resources; ++i) { + struct resource *mem = &standard_resources[i]; + phys_addr_t r_start, r_end, mem_size = resource_size(mem); + + if (!memblock_is_region_reserved(mem->start, mem_size)) continue; - kfree(res); - reserve_region_with_split(mem, start, end, "reserved"); + for_each_reserved_mem_region(j, &r_start, &r_end) { + resource_size_t start, end; + + start = max(PFN_PHYS(PFN_DOWN(r_start)), mem->start); + end = min(PFN_PHYS(PFN_UP(r_end)) - 1, mem->end); + + if (start > mem->end || end < mem->start) + continue; + + reserve_region_with_split(mem, start, end, "reserved"); + } } return 0; @@ -351,12 +349,8 @@ void __init setup_arch(char **cmdline_p) #endif #ifdef CONFIG_VT -#if defined(CONFIG_VGA_CONSOLE) - conswitchp = &vga_con; -#elif defined(CONFIG_DUMMY_CONSOLE) conswitchp = &dummy_con; #endif -#endif if (boot_args[1] || boot_args[2] || boot_args[3]) { pr_err("WARNING: x1-x3 nonzero in violation of boot protocol:\n" "\tx1: %016llx\n\tx2: %016llx\n\tx3: %016llx\n" diff --git a/arch/arm64/kernel/sleep.S b/arch/arm64/kernel/sleep.S index bebec8ef9372..3e53ffa07994 100644 --- a/arch/arm64/kernel/sleep.S +++ b/arch/arm64/kernel/sleep.S @@ -101,6 +101,7 @@ ENTRY(cpu_resume) bl el2_setup // if in EL2 drop to EL1 cleanly bl __cpu_setup /* enable the MMU early - so we can access sleep_save_stash by va */ + adrp x1, swapper_pg_dir bl __enable_mmu ldr x8, =_cpu_resume br x8 diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index 25fcd22a4bb2..96b8f2f51ab2 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -602,7 +602,7 @@ static void __init of_parse_and_init_cpus(void) { struct device_node *dn; - for_each_node_by_type(dn, "cpu") { + for_each_of_cpu_node(dn) { u64 hwid = of_get_cpu_mpidr(dn); if (hwid == INVALID_HWID) diff --git a/arch/arm64/kernel/ssbd.c b/arch/arm64/kernel/ssbd.c index 3432e5ef9f41..885f13e58708 100644 --- a/arch/arm64/kernel/ssbd.c +++ b/arch/arm64/kernel/ssbd.c @@ -3,17 +3,33 @@ * Copyright (C) 2018 ARM Ltd, All Rights Reserved. */ +#include <linux/compat.h> #include <linux/errno.h> #include <linux/sched.h> +#include <linux/sched/task_stack.h> #include <linux/thread_info.h> #include <asm/cpufeature.h> +static void ssbd_ssbs_enable(struct task_struct *task) +{ + u64 val = is_compat_thread(task_thread_info(task)) ? + PSR_AA32_SSBS_BIT : PSR_SSBS_BIT; + + task_pt_regs(task)->pstate |= val; +} + +static void ssbd_ssbs_disable(struct task_struct *task) +{ + u64 val = is_compat_thread(task_thread_info(task)) ? + PSR_AA32_SSBS_BIT : PSR_SSBS_BIT; + + task_pt_regs(task)->pstate &= ~val; +} + /* * prctl interface for SSBD - * FIXME: Drop the below ifdefery once merged in 4.18. */ -#ifdef PR_SPEC_STORE_BYPASS static int ssbd_prctl_set(struct task_struct *task, unsigned long ctrl) { int state = arm64_get_ssbd_state(); @@ -46,12 +62,14 @@ static int ssbd_prctl_set(struct task_struct *task, unsigned long ctrl) return -EPERM; task_clear_spec_ssb_disable(task); clear_tsk_thread_flag(task, TIF_SSBD); + ssbd_ssbs_enable(task); break; case PR_SPEC_DISABLE: if (state == ARM64_SSBD_FORCE_DISABLE) return -EPERM; task_set_spec_ssb_disable(task); set_tsk_thread_flag(task, TIF_SSBD); + ssbd_ssbs_disable(task); break; case PR_SPEC_FORCE_DISABLE: if (state == ARM64_SSBD_FORCE_DISABLE) @@ -59,6 +77,7 @@ static int ssbd_prctl_set(struct task_struct *task, unsigned long ctrl) task_set_spec_ssb_disable(task); task_set_spec_ssb_force_disable(task); set_tsk_thread_flag(task, TIF_SSBD); + ssbd_ssbs_disable(task); break; default: return -ERANGE; @@ -107,4 +126,3 @@ int arch_prctl_spec_ctrl_get(struct task_struct *task, unsigned long which) return -ENODEV; } } -#endif /* PR_SPEC_STORE_BYPASS */ diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c index 70c283368b64..9405d1b7f4b0 100644 --- a/arch/arm64/kernel/suspend.c +++ b/arch/arm64/kernel/suspend.c @@ -48,6 +48,10 @@ void notrace __cpu_suspend_exit(void) */ cpu_uninstall_idmap(); + /* Restore CnP bit in TTBR1_EL1 */ + if (system_supports_cnp()) + cpu_replace_ttbr1(lm_alias(swapper_pg_dir)); + /* * PSTATE was not saved over suspend/resume, re-enable any detected * features that might not have been set correctly. diff --git a/arch/arm64/kernel/sys_compat.c b/arch/arm64/kernel/sys_compat.c index a6109825eeb9..32653d156747 100644 --- a/arch/arm64/kernel/sys_compat.c +++ b/arch/arm64/kernel/sys_compat.c @@ -68,8 +68,8 @@ do_compat_cache_op(unsigned long start, unsigned long end, int flags) */ long compat_arm_syscall(struct pt_regs *regs) { - siginfo_t info; unsigned int no = regs->regs[7]; + void __user *addr; switch (no) { /* @@ -112,13 +112,10 @@ long compat_arm_syscall(struct pt_regs *regs) break; } - clear_siginfo(&info); - info.si_signo = SIGILL; - info.si_errno = 0; - info.si_code = ILL_ILLTRP; - info.si_addr = (void __user *)instruction_pointer(regs) - - (compat_thumb_mode(regs) ? 2 : 4); + addr = (void __user *)instruction_pointer(regs) - + (compat_thumb_mode(regs) ? 2 : 4); - arm64_notify_die("Oops - bad compat syscall(2)", regs, &info, no); + arm64_notify_die("Oops - bad compat syscall(2)", regs, + SIGILL, ILL_ILLTRP, addr, no); return 0; } diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index 039e9ff379cc..5f4d9acb32f5 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -224,24 +224,19 @@ void die(const char *str, struct pt_regs *regs, int err) do_exit(SIGSEGV); } -static bool show_unhandled_signals_ratelimited(void) +static void arm64_show_signal(int signo, const char *str) { static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL, DEFAULT_RATELIMIT_BURST); - return show_unhandled_signals && __ratelimit(&rs); -} - -void arm64_force_sig_info(struct siginfo *info, const char *str, - struct task_struct *tsk) -{ + struct task_struct *tsk = current; unsigned int esr = tsk->thread.fault_code; struct pt_regs *regs = task_pt_regs(tsk); - if (!unhandled_signal(tsk, info->si_signo)) - goto send_sig; - - if (!show_unhandled_signals_ratelimited()) - goto send_sig; + /* Leave if the signal won't be shown */ + if (!show_unhandled_signals || + !unhandled_signal(tsk, signo) || + !__ratelimit(&rs)) + return; pr_info("%s[%d]: unhandled exception: ", tsk->comm, task_pid_nr(tsk)); if (esr) @@ -251,19 +246,39 @@ void arm64_force_sig_info(struct siginfo *info, const char *str, print_vma_addr(KERN_CONT " in ", regs->pc); pr_cont("\n"); __show_regs(regs); +} -send_sig: - force_sig_info(info->si_signo, info, tsk); +void arm64_force_sig_fault(int signo, int code, void __user *addr, + const char *str) +{ + arm64_show_signal(signo, str); + force_sig_fault(signo, code, addr, current); +} + +void arm64_force_sig_mceerr(int code, void __user *addr, short lsb, + const char *str) +{ + arm64_show_signal(SIGBUS, str); + force_sig_mceerr(code, addr, lsb, current); +} + +void arm64_force_sig_ptrace_errno_trap(int errno, void __user *addr, + const char *str) +{ + arm64_show_signal(SIGTRAP, str); + force_sig_ptrace_errno_trap(errno, addr); } void arm64_notify_die(const char *str, struct pt_regs *regs, - struct siginfo *info, int err) + int signo, int sicode, void __user *addr, + int err) { if (user_mode(regs)) { WARN_ON(regs != current_pt_regs()); current->thread.fault_address = 0; current->thread.fault_code = err; - arm64_force_sig_info(info, str, current); + + arm64_force_sig_fault(signo, sicode, addr, str); } else { die(str, regs, err); } @@ -310,10 +325,12 @@ static int call_undef_hook(struct pt_regs *regs) int (*fn)(struct pt_regs *regs, u32 instr) = NULL; void __user *pc = (void __user *)instruction_pointer(regs); - if (!user_mode(regs)) - return 1; - - if (compat_thumb_mode(regs)) { + if (!user_mode(regs)) { + __le32 instr_le; + if (probe_kernel_address((__force __le32 *)pc, instr_le)) + goto exit; + instr = le32_to_cpu(instr_le); + } else if (compat_thumb_mode(regs)) { /* 16-bit Thumb instruction */ __le16 instr_le; if (get_user(instr_le, (__le16 __user *)pc)) @@ -348,11 +365,11 @@ exit: void force_signal_inject(int signal, int code, unsigned long address) { - siginfo_t info; const char *desc; struct pt_regs *regs = current_pt_regs(); - clear_siginfo(&info); + if (WARN_ON(!user_mode(regs))) + return; switch (signal) { case SIGILL: @@ -372,12 +389,7 @@ void force_signal_inject(int signal, int code, unsigned long address) signal = SIGKILL; } - info.si_signo = signal; - info.si_errno = 0; - info.si_code = code; - info.si_addr = (void __user *)address; - - arm64_notify_die(desc, regs, &info, 0); + arm64_notify_die(desc, regs, signal, code, (void __user *)address, 0); } /* @@ -406,14 +418,10 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) if (call_undef_hook(regs) == 0) return; + BUG_ON(!user_mode(regs)); force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc); } -void cpu_enable_cache_maint_trap(const struct arm64_cpu_capabilities *__unused) -{ - sysreg_clear_set(sctlr_el1, SCTLR_EL1_UCI, 0); -} - #define __user_cache_maint(insn, address, res) \ if (address >= user_addr_max()) { \ res = -EFAULT; \ @@ -437,7 +445,7 @@ void cpu_enable_cache_maint_trap(const struct arm64_cpu_capabilities *__unused) static void user_cache_maint_handler(unsigned int esr, struct pt_regs *regs) { unsigned long address; - int rt = (esr & ESR_ELx_SYS64_ISS_RT_MASK) >> ESR_ELx_SYS64_ISS_RT_SHIFT; + int rt = ESR_ELx_SYS64_ISS_RT(esr); int crm = (esr & ESR_ELx_SYS64_ISS_CRM_MASK) >> ESR_ELx_SYS64_ISS_CRM_SHIFT; int ret = 0; @@ -472,7 +480,7 @@ static void user_cache_maint_handler(unsigned int esr, struct pt_regs *regs) static void ctr_read_handler(unsigned int esr, struct pt_regs *regs) { - int rt = (esr & ESR_ELx_SYS64_ISS_RT_MASK) >> ESR_ELx_SYS64_ISS_RT_SHIFT; + int rt = ESR_ELx_SYS64_ISS_RT(esr); unsigned long val = arm64_ftr_reg_user_value(&arm64_ftr_reg_ctrel0); pt_regs_write_reg(regs, rt, val); @@ -482,7 +490,7 @@ static void ctr_read_handler(unsigned int esr, struct pt_regs *regs) static void cntvct_read_handler(unsigned int esr, struct pt_regs *regs) { - int rt = (esr & ESR_ELx_SYS64_ISS_RT_MASK) >> ESR_ELx_SYS64_ISS_RT_SHIFT; + int rt = ESR_ELx_SYS64_ISS_RT(esr); pt_regs_write_reg(regs, rt, arch_counter_get_cntvct()); arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE); @@ -490,12 +498,28 @@ static void cntvct_read_handler(unsigned int esr, struct pt_regs *regs) static void cntfrq_read_handler(unsigned int esr, struct pt_regs *regs) { - int rt = (esr & ESR_ELx_SYS64_ISS_RT_MASK) >> ESR_ELx_SYS64_ISS_RT_SHIFT; + int rt = ESR_ELx_SYS64_ISS_RT(esr); pt_regs_write_reg(regs, rt, arch_timer_get_rate()); arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE); } +static void mrs_handler(unsigned int esr, struct pt_regs *regs) +{ + u32 sysreg, rt; + + rt = ESR_ELx_SYS64_ISS_RT(esr); + sysreg = esr_sys64_to_sysreg(esr); + + if (do_emulate_mrs(regs, sysreg, rt) != 0) + force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc); +} + +static void wfi_handler(unsigned int esr, struct pt_regs *regs) +{ + arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE); +} + struct sys64_hook { unsigned int esr_mask; unsigned int esr_val; @@ -526,9 +550,176 @@ static struct sys64_hook sys64_hooks[] = { .esr_val = ESR_ELx_SYS64_ISS_SYS_CNTFRQ, .handler = cntfrq_read_handler, }, + { + /* Trap read access to CPUID registers */ + .esr_mask = ESR_ELx_SYS64_ISS_SYS_MRS_OP_MASK, + .esr_val = ESR_ELx_SYS64_ISS_SYS_MRS_OP_VAL, + .handler = mrs_handler, + }, + { + /* Trap WFI instructions executed in userspace */ + .esr_mask = ESR_ELx_WFx_MASK, + .esr_val = ESR_ELx_WFx_WFI_VAL, + .handler = wfi_handler, + }, {}, }; + +#ifdef CONFIG_COMPAT +#define PSTATE_IT_1_0_SHIFT 25 +#define PSTATE_IT_1_0_MASK (0x3 << PSTATE_IT_1_0_SHIFT) +#define PSTATE_IT_7_2_SHIFT 10 +#define PSTATE_IT_7_2_MASK (0x3f << PSTATE_IT_7_2_SHIFT) + +static u32 compat_get_it_state(struct pt_regs *regs) +{ + u32 it, pstate = regs->pstate; + + it = (pstate & PSTATE_IT_1_0_MASK) >> PSTATE_IT_1_0_SHIFT; + it |= ((pstate & PSTATE_IT_7_2_MASK) >> PSTATE_IT_7_2_SHIFT) << 2; + + return it; +} + +static void compat_set_it_state(struct pt_regs *regs, u32 it) +{ + u32 pstate_it; + + pstate_it = (it << PSTATE_IT_1_0_SHIFT) & PSTATE_IT_1_0_MASK; + pstate_it |= ((it >> 2) << PSTATE_IT_7_2_SHIFT) & PSTATE_IT_7_2_MASK; + + regs->pstate &= ~PSR_AA32_IT_MASK; + regs->pstate |= pstate_it; +} + +static bool cp15_cond_valid(unsigned int esr, struct pt_regs *regs) +{ + int cond; + + /* Only a T32 instruction can trap without CV being set */ + if (!(esr & ESR_ELx_CV)) { + u32 it; + + it = compat_get_it_state(regs); + if (!it) + return true; + + cond = it >> 4; + } else { + cond = (esr & ESR_ELx_COND_MASK) >> ESR_ELx_COND_SHIFT; + } + + return aarch32_opcode_cond_checks[cond](regs->pstate); +} + +static void advance_itstate(struct pt_regs *regs) +{ + u32 it; + + /* ARM mode */ + if (!(regs->pstate & PSR_AA32_T_BIT) || + !(regs->pstate & PSR_AA32_IT_MASK)) + return; + + it = compat_get_it_state(regs); + + /* + * If this is the last instruction of the block, wipe the IT + * state. Otherwise advance it. + */ + if (!(it & 7)) + it = 0; + else + it = (it & 0xe0) | ((it << 1) & 0x1f); + + compat_set_it_state(regs, it); +} + +static void arm64_compat_skip_faulting_instruction(struct pt_regs *regs, + unsigned int sz) +{ + advance_itstate(regs); + arm64_skip_faulting_instruction(regs, sz); +} + +static void compat_cntfrq_read_handler(unsigned int esr, struct pt_regs *regs) +{ + int reg = (esr & ESR_ELx_CP15_32_ISS_RT_MASK) >> ESR_ELx_CP15_32_ISS_RT_SHIFT; + + pt_regs_write_reg(regs, reg, arch_timer_get_rate()); + arm64_compat_skip_faulting_instruction(regs, 4); +} + +static struct sys64_hook cp15_32_hooks[] = { + { + .esr_mask = ESR_ELx_CP15_32_ISS_SYS_MASK, + .esr_val = ESR_ELx_CP15_32_ISS_SYS_CNTFRQ, + .handler = compat_cntfrq_read_handler, + }, + {}, +}; + +static void compat_cntvct_read_handler(unsigned int esr, struct pt_regs *regs) +{ + int rt = (esr & ESR_ELx_CP15_64_ISS_RT_MASK) >> ESR_ELx_CP15_64_ISS_RT_SHIFT; + int rt2 = (esr & ESR_ELx_CP15_64_ISS_RT2_MASK) >> ESR_ELx_CP15_64_ISS_RT2_SHIFT; + u64 val = arch_counter_get_cntvct(); + + pt_regs_write_reg(regs, rt, lower_32_bits(val)); + pt_regs_write_reg(regs, rt2, upper_32_bits(val)); + arm64_compat_skip_faulting_instruction(regs, 4); +} + +static struct sys64_hook cp15_64_hooks[] = { + { + .esr_mask = ESR_ELx_CP15_64_ISS_SYS_MASK, + .esr_val = ESR_ELx_CP15_64_ISS_SYS_CNTVCT, + .handler = compat_cntvct_read_handler, + }, + {}, +}; + +asmlinkage void __exception do_cp15instr(unsigned int esr, struct pt_regs *regs) +{ + struct sys64_hook *hook, *hook_base; + + if (!cp15_cond_valid(esr, regs)) { + /* + * There is no T16 variant of a CP access, so we + * always advance PC by 4 bytes. + */ + arm64_compat_skip_faulting_instruction(regs, 4); + return; + } + + switch (ESR_ELx_EC(esr)) { + case ESR_ELx_EC_CP15_32: + hook_base = cp15_32_hooks; + break; + case ESR_ELx_EC_CP15_64: + hook_base = cp15_64_hooks; + break; + default: + do_undefinstr(regs); + return; + } + + for (hook = hook_base; hook->handler; hook++) + if ((hook->esr_mask & esr) == hook->esr_val) { + hook->handler(esr, regs); + return; + } + + /* + * New cp15 instructions may previously have been undefined at + * EL0. Fall back to our usual undefined instruction handler + * so that we handle these consistently. + */ + do_undefinstr(regs); +} +#endif + asmlinkage void __exception do_sysinstr(unsigned int esr, struct pt_regs *regs) { struct sys64_hook *hook; @@ -605,7 +796,6 @@ asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr) handler[reason], smp_processor_id(), esr, esr_get_class_string(esr)); - die("Oops - bad mode", regs, 0); local_daif_mask(); panic("bad mode"); } @@ -616,19 +806,13 @@ asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr) */ asmlinkage void bad_el0_sync(struct pt_regs *regs, int reason, unsigned int esr) { - siginfo_t info; void __user *pc = (void __user *)instruction_pointer(regs); - clear_siginfo(&info); - info.si_signo = SIGILL; - info.si_errno = 0; - info.si_code = ILL_ILLOPC; - info.si_addr = pc; - current->thread.fault_address = 0; current->thread.fault_code = esr; - arm64_force_sig_info(&info, "Bad EL0 synchronous exception", current); + arm64_force_sig_fault(SIGILL, ILL_ILLOPC, pc, + "Bad EL0 synchronous exception"); } #ifdef CONFIG_VMAP_STACK diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S index 605d1b60469c..03b00007553d 100644 --- a/arch/arm64/kernel/vmlinux.lds.S +++ b/arch/arm64/kernel/vmlinux.lds.S @@ -138,6 +138,23 @@ SECTIONS EXCEPTION_TABLE(8) /* __init_begin will be marked RO NX */ NOTES + . = ALIGN(PAGE_SIZE); + idmap_pg_dir = .; + . += IDMAP_DIR_SIZE; + +#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 + tramp_pg_dir = .; + . += PAGE_SIZE; +#endif + +#ifdef CONFIG_ARM64_SW_TTBR0_PAN + reserved_ttbr0 = .; + . += RESERVED_TTBR0_SIZE; +#endif + swapper_pg_dir = .; + . += PAGE_SIZE; + swapper_pg_end = .; + . = ALIGN(SEGMENT_ALIGN); __init_begin = .; __inittext_begin = .; @@ -166,7 +183,6 @@ SECTIONS INIT_SETUP(16) INIT_CALLS CON_INITCALL - SECURITY_INITCALL INIT_RAM_FS *(.init.rodata.* .init.bss) /* from the EFI stub */ } @@ -216,21 +232,9 @@ SECTIONS BSS_SECTION(0, 0, 0) . = ALIGN(PAGE_SIZE); - idmap_pg_dir = .; - . += IDMAP_DIR_SIZE; - -#ifdef CONFIG_UNMAP_KERNEL_AT_EL0 - tramp_pg_dir = .; - . += PAGE_SIZE; -#endif - -#ifdef CONFIG_ARM64_SW_TTBR0_PAN - reserved_ttbr0 = .; - . += RESERVED_TTBR0_SIZE; -#endif - swapper_pg_dir = .; - . += SWAPPER_DIR_SIZE; - swapper_pg_end = .; + init_pg_dir = .; + . += INIT_DIR_SIZE; + init_pg_end = .; __pecoff_data_size = ABSOLUTE(. - __initdata_begin); _end = .; diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c index 07256b08226c..dd436a50fce7 100644 --- a/arch/arm64/kvm/guest.c +++ b/arch/arm64/kvm/guest.c @@ -57,6 +57,45 @@ static u64 core_reg_offset_from_id(u64 id) return id & ~(KVM_REG_ARCH_MASK | KVM_REG_SIZE_MASK | KVM_REG_ARM_CORE); } +static int validate_core_offset(const struct kvm_one_reg *reg) +{ + u64 off = core_reg_offset_from_id(reg->id); + int size; + + switch (off) { + case KVM_REG_ARM_CORE_REG(regs.regs[0]) ... + KVM_REG_ARM_CORE_REG(regs.regs[30]): + case KVM_REG_ARM_CORE_REG(regs.sp): + case KVM_REG_ARM_CORE_REG(regs.pc): + case KVM_REG_ARM_CORE_REG(regs.pstate): + case KVM_REG_ARM_CORE_REG(sp_el1): + case KVM_REG_ARM_CORE_REG(elr_el1): + case KVM_REG_ARM_CORE_REG(spsr[0]) ... + KVM_REG_ARM_CORE_REG(spsr[KVM_NR_SPSR - 1]): + size = sizeof(__u64); + break; + + case KVM_REG_ARM_CORE_REG(fp_regs.vregs[0]) ... + KVM_REG_ARM_CORE_REG(fp_regs.vregs[31]): + size = sizeof(__uint128_t); + break; + + case KVM_REG_ARM_CORE_REG(fp_regs.fpsr): + case KVM_REG_ARM_CORE_REG(fp_regs.fpcr): + size = sizeof(__u32); + break; + + default: + return -EINVAL; + } + + if (KVM_REG_SIZE(reg->id) == size && + IS_ALIGNED(off, size / sizeof(__u32))) + return 0; + + return -EINVAL; +} + static int get_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) { /* @@ -76,6 +115,9 @@ static int get_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) (off + (KVM_REG_SIZE(reg->id) / sizeof(__u32))) >= nr_regs) return -ENOENT; + if (validate_core_offset(reg)) + return -EINVAL; + if (copy_to_user(uaddr, ((u32 *)regs) + off, KVM_REG_SIZE(reg->id))) return -EFAULT; @@ -98,6 +140,9 @@ static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) (off + (KVM_REG_SIZE(reg->id) / sizeof(__u32))) >= nr_regs) return -ENOENT; + if (validate_core_offset(reg)) + return -EINVAL; + if (KVM_REG_SIZE(reg->id) > sizeof(tmp)) return -EINVAL; @@ -107,17 +152,25 @@ static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) } if (off == KVM_REG_ARM_CORE_REG(regs.pstate)) { - u32 mode = (*(u32 *)valp) & PSR_AA32_MODE_MASK; + u64 mode = (*(u64 *)valp) & PSR_AA32_MODE_MASK; switch (mode) { case PSR_AA32_MODE_USR: + if (!system_supports_32bit_el0()) + return -EINVAL; + break; case PSR_AA32_MODE_FIQ: case PSR_AA32_MODE_IRQ: case PSR_AA32_MODE_SVC: case PSR_AA32_MODE_ABT: case PSR_AA32_MODE_UND: + if (!vcpu_el1_is_32bit(vcpu)) + return -EINVAL; + break; case PSR_MODE_EL0t: case PSR_MODE_EL1t: case PSR_MODE_EL1h: + if (vcpu_el1_is_32bit(vcpu)) + return -EINVAL; break; default: err = -EINVAL; @@ -338,15 +391,15 @@ int __attribute_const__ kvm_target_cpu(void) return KVM_ARM_TARGET_CORTEX_A53; case ARM_CPU_PART_CORTEX_A57: return KVM_ARM_TARGET_CORTEX_A57; - }; + } break; case ARM_CPU_IMP_APM: switch (part_number) { case APM_CPU_PART_POTENZA: return KVM_ARM_TARGET_XGENE_POTENZA; - }; + } break; - }; + } /* Return a default generic target */ return KVM_ARM_TARGET_GENERIC_V8; diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c index e5e741bfffe1..35a81bebd02b 100644 --- a/arch/arm64/kvm/handle_exit.c +++ b/arch/arm64/kvm/handle_exit.c @@ -284,6 +284,13 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, */ run->exit_reason = KVM_EXIT_FAIL_ENTRY; return 0; + case ARM_EXCEPTION_IL: + /* + * We attempted an illegal exception return. Guest state must + * have been corrupted somehow. Give up. + */ + run->exit_reason = KVM_EXIT_FAIL_ENTRY; + return -EINVAL; default: kvm_pr_unimpl("Unsupported exception type: %d", exception_index); diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S index ea9225160786..4576b86a5579 100644 --- a/arch/arm64/kvm/hyp-init.S +++ b/arch/arm64/kvm/hyp-init.S @@ -65,6 +65,9 @@ __do_hyp_init: b.lo __kvm_handle_stub_hvc phys_to_ttbr x4, x0 +alternative_if ARM64_HAS_CNP + orr x4, x4, #TTBR_CNP_BIT +alternative_else_nop_endif msr ttbr0_el2, x4 mrs x4, tcr_el1 diff --git a/arch/arm64/kvm/hyp/Makefile b/arch/arm64/kvm/hyp/Makefile index 2fabc2dc1966..82d1904328ad 100644 --- a/arch/arm64/kvm/hyp/Makefile +++ b/arch/arm64/kvm/hyp/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_KVM_ARM_HOST) += switch.o obj-$(CONFIG_KVM_ARM_HOST) += fpsimd.o obj-$(CONFIG_KVM_ARM_HOST) += tlb.o obj-$(CONFIG_KVM_ARM_HOST) += hyp-entry.o -obj-$(CONFIG_KVM_ARM_HOST) += s2-setup.o # KVM code is run at a different exception code with a different map, so # compiler instrumentation that inserts callbacks or checks into the code may diff --git a/arch/arm64/kvm/hyp/hyp-entry.S b/arch/arm64/kvm/hyp/hyp-entry.S index 24b4fbafe3e4..b1f14f736962 100644 --- a/arch/arm64/kvm/hyp/hyp-entry.S +++ b/arch/arm64/kvm/hyp/hyp-entry.S @@ -162,6 +162,20 @@ el1_error: mov x0, #ARM_EXCEPTION_EL1_SERROR b __guest_exit +el2_sync: + /* Check for illegal exception return, otherwise panic */ + mrs x0, spsr_el2 + + /* if this was something else, then panic! */ + tst x0, #PSR_IL_BIT + b.eq __hyp_panic + + /* Let's attempt a recovery from the illegal exception return */ + get_vcpu_ptr x1, x0 + mov x0, #ARM_EXCEPTION_IL + b __guest_exit + + el2_error: ldp x0, x1, [sp], #16 @@ -240,7 +254,7 @@ ENTRY(__kvm_hyp_vector) invalid_vect el2t_fiq_invalid // FIQ EL2t invalid_vect el2t_error_invalid // Error EL2t - invalid_vect el2h_sync_invalid // Synchronous EL2h + valid_vect el2_sync // Synchronous EL2h invalid_vect el2h_irq_invalid // IRQ EL2h invalid_vect el2h_fiq_invalid // FIQ EL2h valid_vect el2_error // Error EL2h diff --git a/arch/arm64/kvm/hyp/s2-setup.c b/arch/arm64/kvm/hyp/s2-setup.c deleted file mode 100644 index 603e1ee83e89..000000000000 --- a/arch/arm64/kvm/hyp/s2-setup.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Copyright (C) 2016 - ARM Ltd - * Author: Marc Zyngier <marc.zyngier@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <linux/types.h> -#include <asm/kvm_arm.h> -#include <asm/kvm_asm.h> -#include <asm/kvm_hyp.h> - -u32 __hyp_text __init_stage2_translation(void) -{ - u64 val = VTCR_EL2_FLAGS; - u64 parange; - u64 tmp; - - /* - * Read the PARange bits from ID_AA64MMFR0_EL1 and set the PS - * bits in VTCR_EL2. Amusingly, the PARange is 4 bits, while - * PS is only 3. Fortunately, bit 19 is RES0 in VTCR_EL2... - */ - parange = read_sysreg(id_aa64mmfr0_el1) & 7; - if (parange > ID_AA64MMFR0_PARANGE_MAX) - parange = ID_AA64MMFR0_PARANGE_MAX; - val |= parange << 16; - - /* Compute the actual PARange... */ - switch (parange) { - case 0: - parange = 32; - break; - case 1: - parange = 36; - break; - case 2: - parange = 40; - break; - case 3: - parange = 42; - break; - case 4: - parange = 44; - break; - case 5: - default: - parange = 48; - break; - } - - /* - * ... and clamp it to 40 bits, unless we have some braindead - * HW that implements less than that. In all cases, we'll - * return that value for the rest of the kernel to decide what - * to do. - */ - val |= 64 - (parange > 40 ? 40 : parange); - - /* - * Check the availability of Hardware Access Flag / Dirty Bit - * Management in ID_AA64MMFR1_EL1 and enable the feature in VTCR_EL2. - */ - tmp = (read_sysreg(id_aa64mmfr1_el1) >> ID_AA64MMFR1_HADBS_SHIFT) & 0xf; - if (tmp) - val |= VTCR_EL2_HA; - - /* - * Read the VMIDBits bits from ID_AA64MMFR1_EL1 and set the VS - * bit in VTCR_EL2. - */ - tmp = (read_sysreg(id_aa64mmfr1_el1) >> ID_AA64MMFR1_VMIDBITS_SHIFT) & 0xf; - val |= (tmp == ID_AA64MMFR1_VMIDBITS_16) ? - VTCR_EL2_VS_16BIT : - VTCR_EL2_VS_8BIT; - - write_sysreg(val, vtcr_el2); - - return parange; -} diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c index d496ef579859..7cc175c88a37 100644 --- a/arch/arm64/kvm/hyp/switch.c +++ b/arch/arm64/kvm/hyp/switch.c @@ -98,8 +98,10 @@ static void activate_traps_vhe(struct kvm_vcpu *vcpu) val = read_sysreg(cpacr_el1); val |= CPACR_EL1_TTA; val &= ~CPACR_EL1_ZEN; - if (!update_fp_enabled(vcpu)) + if (!update_fp_enabled(vcpu)) { val &= ~CPACR_EL1_FPEN; + __activate_traps_fpsimd32(vcpu); + } write_sysreg(val, cpacr_el1); @@ -114,8 +116,10 @@ static void __hyp_text __activate_traps_nvhe(struct kvm_vcpu *vcpu) val = CPTR_EL2_DEFAULT; val |= CPTR_EL2_TTA | CPTR_EL2_TZ; - if (!update_fp_enabled(vcpu)) + if (!update_fp_enabled(vcpu)) { val |= CPTR_EL2_TFP; + __activate_traps_fpsimd32(vcpu); + } write_sysreg(val, cptr_el2); } @@ -129,7 +133,6 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu) if (cpus_have_const_cap(ARM64_HAS_RAS_EXTN) && (hcr & HCR_VSE)) write_sysreg_s(vcpu->arch.vsesr_el2, SYS_VSESR_EL2); - __activate_traps_fpsimd32(vcpu); if (has_vhe()) activate_traps_vhe(vcpu); else @@ -195,7 +198,7 @@ void deactivate_traps_vhe_put(void) static void __hyp_text __activate_vm(struct kvm *kvm) { - write_sysreg(kvm->arch.vttbr, vttbr_el2); + __load_guest_stage2(kvm); } static void __hyp_text __deactivate_vm(struct kvm_vcpu *vcpu) @@ -260,7 +263,7 @@ static bool __hyp_text __translate_far_to_hpfar(u64 far, u64 *hpfar) return false; /* Translation failed, back to guest */ /* Convert PAR to HPFAR format */ - *hpfar = ((tmp >> 12) & ((1UL << 36) - 1)) << 4; + *hpfar = PAR_TO_HPFAR(tmp); return true; } diff --git a/arch/arm64/kvm/hyp/sysreg-sr.c b/arch/arm64/kvm/hyp/sysreg-sr.c index 9ce223944983..68d6f7c3b237 100644 --- a/arch/arm64/kvm/hyp/sysreg-sr.c +++ b/arch/arm64/kvm/hyp/sysreg-sr.c @@ -152,8 +152,25 @@ static void __hyp_text __sysreg_restore_el1_state(struct kvm_cpu_context *ctxt) static void __hyp_text __sysreg_restore_el2_return_state(struct kvm_cpu_context *ctxt) { + u64 pstate = ctxt->gp_regs.regs.pstate; + u64 mode = pstate & PSR_AA32_MODE_MASK; + + /* + * Safety check to ensure we're setting the CPU up to enter the guest + * in a less privileged mode. + * + * If we are attempting a return to EL2 or higher in AArch64 state, + * program SPSR_EL2 with M=EL2h and the IL bit set which ensures that + * we'll take an illegal exception state exception immediately after + * the ERET to the guest. Attempts to return to AArch32 Hyp will + * result in an illegal exception return because EL2's execution state + * is determined by SCR_EL3.RW. + */ + if (!(mode & PSR_MODE32_BIT) && mode >= PSR_MODE_EL2t) + pstate = PSR_MODE_EL2h | PSR_IL_BIT; + write_sysreg_el2(ctxt->gp_regs.regs.pc, elr); - write_sysreg_el2(ctxt->gp_regs.regs.pstate, spsr); + write_sysreg_el2(pstate, spsr); if (cpus_have_const_cap(ARM64_HAS_RAS_EXTN)) write_sysreg_s(ctxt->sys_regs[DISR_EL1], SYS_VDISR_EL2); @@ -288,3 +305,14 @@ void kvm_vcpu_put_sysregs(struct kvm_vcpu *vcpu) vcpu->arch.sysregs_loaded_on_cpu = false; } + +void __hyp_text __kvm_enable_ssbs(void) +{ + u64 tmp; + + asm volatile( + "mrs %0, sctlr_el2\n" + "orr %0, %0, %1\n" + "msr sctlr_el2, %0" + : "=&r" (tmp) : "L" (SCTLR_ELx_DSSBS)); +} diff --git a/arch/arm64/kvm/hyp/tlb.c b/arch/arm64/kvm/hyp/tlb.c index 131c7772703c..4dbd9c69a96d 100644 --- a/arch/arm64/kvm/hyp/tlb.c +++ b/arch/arm64/kvm/hyp/tlb.c @@ -30,7 +30,7 @@ static void __hyp_text __tlb_switch_to_guest_vhe(struct kvm *kvm) * bits. Changing E2H is impossible (goodbye TTBR1_EL2), so * let's flip TGE before executing the TLB operation. */ - write_sysreg(kvm->arch.vttbr, vttbr_el2); + __load_guest_stage2(kvm); val = read_sysreg(hcr_el2); val &= ~HCR_TGE; write_sysreg(val, hcr_el2); @@ -39,7 +39,7 @@ static void __hyp_text __tlb_switch_to_guest_vhe(struct kvm *kvm) static void __hyp_text __tlb_switch_to_guest_nvhe(struct kvm *kvm) { - write_sysreg(kvm->arch.vttbr, vttbr_el2); + __load_guest_stage2(kvm); isb(); } diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c index e37c78bbe1ca..b72a3dd56204 100644 --- a/arch/arm64/kvm/reset.c +++ b/arch/arm64/kvm/reset.c @@ -26,6 +26,7 @@ #include <kvm/arm_arch_timer.h> +#include <asm/cpufeature.h> #include <asm/cputype.h> #include <asm/ptrace.h> #include <asm/kvm_arm.h> @@ -33,6 +34,9 @@ #include <asm/kvm_coproc.h> #include <asm/kvm_mmu.h> +/* Maximum phys_shift supported for any VM on this host */ +static u32 kvm_ipa_limit; + /* * ARMv8 Reset Values */ @@ -55,12 +59,12 @@ static bool cpu_has_32bit_el1(void) } /** - * kvm_arch_dev_ioctl_check_extension + * kvm_arch_vm_ioctl_check_extension * * We currently assume that the number of HW registers is uniform * across all CPUs (see cpuinfo_sanity_check). */ -int kvm_arch_dev_ioctl_check_extension(struct kvm *kvm, long ext) +int kvm_arch_vm_ioctl_check_extension(struct kvm *kvm, long ext) { int r; @@ -82,9 +86,11 @@ int kvm_arch_dev_ioctl_check_extension(struct kvm *kvm, long ext) break; case KVM_CAP_SET_GUEST_DEBUG: case KVM_CAP_VCPU_ATTRIBUTES: - case KVM_CAP_VCPU_EVENTS: r = 1; break; + case KVM_CAP_ARM_VM_IPA_SIZE: + r = kvm_ipa_limit; + break; default: r = 0; } @@ -133,3 +139,99 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) /* Reset timer */ return kvm_timer_vcpu_reset(vcpu); } + +void kvm_set_ipa_limit(void) +{ + unsigned int ipa_max, pa_max, va_max, parange; + + parange = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1) & 0x7; + pa_max = id_aa64mmfr0_parange_to_phys_shift(parange); + + /* Clamp the IPA limit to the PA size supported by the kernel */ + ipa_max = (pa_max > PHYS_MASK_SHIFT) ? PHYS_MASK_SHIFT : pa_max; + /* + * Since our stage2 table is dependent on the stage1 page table code, + * we must always honor the following condition: + * + * Number of levels in Stage1 >= Number of levels in Stage2. + * + * So clamp the ipa limit further down to limit the number of levels. + * Since we can concatenate upto 16 tables at entry level, we could + * go upto 4bits above the maximum VA addressible with the current + * number of levels. + */ + va_max = PGDIR_SHIFT + PAGE_SHIFT - 3; + va_max += 4; + + if (va_max < ipa_max) + ipa_max = va_max; + + /* + * If the final limit is lower than the real physical address + * limit of the CPUs, report the reason. + */ + if (ipa_max < pa_max) + pr_info("kvm: Limiting the IPA size due to kernel %s Address limit\n", + (va_max < pa_max) ? "Virtual" : "Physical"); + + WARN(ipa_max < KVM_PHYS_SHIFT, + "KVM IPA limit (%d bit) is smaller than default size\n", ipa_max); + kvm_ipa_limit = ipa_max; + kvm_info("IPA Size Limit: %dbits\n", kvm_ipa_limit); +} + +/* + * Configure the VTCR_EL2 for this VM. The VTCR value is common + * across all the physical CPUs on the system. We use system wide + * sanitised values to fill in different fields, except for Hardware + * Management of Access Flags. HA Flag is set unconditionally on + * all CPUs, as it is safe to run with or without the feature and + * the bit is RES0 on CPUs that don't support it. + */ +int kvm_arm_setup_stage2(struct kvm *kvm, unsigned long type) +{ + u64 vtcr = VTCR_EL2_FLAGS; + u32 parange, phys_shift; + u8 lvls; + + if (type & ~KVM_VM_TYPE_ARM_IPA_SIZE_MASK) + return -EINVAL; + + phys_shift = KVM_VM_TYPE_ARM_IPA_SIZE(type); + if (phys_shift) { + if (phys_shift > kvm_ipa_limit || + phys_shift < 32) + return -EINVAL; + } else { + phys_shift = KVM_PHYS_SHIFT; + } + + parange = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1) & 7; + if (parange > ID_AA64MMFR0_PARANGE_MAX) + parange = ID_AA64MMFR0_PARANGE_MAX; + vtcr |= parange << VTCR_EL2_PS_SHIFT; + + vtcr |= VTCR_EL2_T0SZ(phys_shift); + /* + * Use a minimum 2 level page table to prevent splitting + * host PMD huge pages at stage2. + */ + lvls = stage2_pgtable_levels(phys_shift); + if (lvls < 2) + lvls = 2; + vtcr |= VTCR_EL2_LVLS_TO_SL0(lvls); + + /* + * Enable the Hardware Access Flag management, unconditionally + * on all CPUs. The features is RES0 on CPUs without the support + * and must be ignored by the CPUs. + */ + vtcr |= VTCR_EL2_HA; + + /* Set the vmid bits */ + vtcr |= (kvm_get_vmid_bits() == 16) ? + VTCR_EL2_VS_16BIT : + VTCR_EL2_VS_8BIT; + kvm->arch.vtcr = vtcr; + return 0; +} diff --git a/arch/arm64/lib/Makefile b/arch/arm64/lib/Makefile index 68755fd70dcf..69ff9887f724 100644 --- a/arch/arm64/lib/Makefile +++ b/arch/arm64/lib/Makefile @@ -12,7 +12,7 @@ lib-y := clear_user.o delay.o copy_from_user.o \ # when supported by the CPU. Result and argument registers are handled # correctly, based on the function prototype. lib-$(CONFIG_ARM64_LSE_ATOMICS) += atomic_ll_sc.o -CFLAGS_atomic_ll_sc.o := -fcall-used-x0 -ffixed-x1 -ffixed-x2 \ +CFLAGS_atomic_ll_sc.o := -ffixed-x1 -ffixed-x2 \ -ffixed-x3 -ffixed-x4 -ffixed-x5 -ffixed-x6 \ -ffixed-x7 -fcall-saved-x8 -fcall-saved-x9 \ -fcall-saved-x10 -fcall-saved-x11 -fcall-saved-x12 \ @@ -25,3 +25,5 @@ KCOV_INSTRUMENT_atomic_ll_sc.o := n UBSAN_SANITIZE_atomic_ll_sc.o := n lib-$(CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE) += uaccess_flushcache.o + +obj-$(CONFIG_CRC32) += crc32.o diff --git a/arch/arm64/lib/crc32.S b/arch/arm64/lib/crc32.S new file mode 100644 index 000000000000..5bc1e85b4e1c --- /dev/null +++ b/arch/arm64/lib/crc32.S @@ -0,0 +1,60 @@ +/* + * Accelerated CRC32(C) using AArch64 CRC instructions + * + * Copyright (C) 2016 - 2018 Linaro Ltd <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/alternative.h> +#include <asm/assembler.h> + + .cpu generic+crc + + .macro __crc32, c +0: subs x2, x2, #16 + b.mi 8f + ldp x3, x4, [x1], #16 +CPU_BE( rev x3, x3 ) +CPU_BE( rev x4, x4 ) + crc32\c\()x w0, w0, x3 + crc32\c\()x w0, w0, x4 + b.ne 0b + ret + +8: tbz x2, #3, 4f + ldr x3, [x1], #8 +CPU_BE( rev x3, x3 ) + crc32\c\()x w0, w0, x3 +4: tbz x2, #2, 2f + ldr w3, [x1], #4 +CPU_BE( rev w3, w3 ) + crc32\c\()w w0, w0, w3 +2: tbz x2, #1, 1f + ldrh w3, [x1], #2 +CPU_BE( rev16 w3, w3 ) + crc32\c\()h w0, w0, w3 +1: tbz x2, #0, 0f + ldrb w3, [x1] + crc32\c\()b w0, w0, w3 +0: ret + .endm + + .align 5 +ENTRY(crc32_le) +alternative_if_not ARM64_HAS_CRC32 + b crc32_le_base +alternative_else_nop_endif + __crc32 +ENDPROC(crc32_le) + + .align 5 +ENTRY(__crc32c_le) +alternative_if_not ARM64_HAS_CRC32 + b __crc32c_le_base +alternative_else_nop_endif + __crc32 c +ENDPROC(__crc32c_le) diff --git a/arch/arm64/lib/memchr.S b/arch/arm64/lib/memchr.S index 4444c1d25f4b..0f164a4baf52 100644 --- a/arch/arm64/lib/memchr.S +++ b/arch/arm64/lib/memchr.S @@ -30,7 +30,7 @@ * Returns: * x0 - address of first occurrence of 'c' or 0 */ -ENTRY(memchr) +WEAK(memchr) and w1, w1, #0xff 1: subs x2, x2, #1 b.mi 2f diff --git a/arch/arm64/lib/memcmp.S b/arch/arm64/lib/memcmp.S index 2a4e239bd17a..fb295f52e9f8 100644 --- a/arch/arm64/lib/memcmp.S +++ b/arch/arm64/lib/memcmp.S @@ -58,7 +58,7 @@ pos .req x11 limit_wd .req x12 mask .req x13 -ENTRY(memcmp) +WEAK(memcmp) cbz limit, .Lret0 eor tmp1, src1, src2 tst tmp1, #7 diff --git a/arch/arm64/lib/strchr.S b/arch/arm64/lib/strchr.S index dae0cf5591f9..7c83091d1bcd 100644 --- a/arch/arm64/lib/strchr.S +++ b/arch/arm64/lib/strchr.S @@ -29,7 +29,7 @@ * Returns: * x0 - address of first occurrence of 'c' or 0 */ -ENTRY(strchr) +WEAK(strchr) and w1, w1, #0xff 1: ldrb w2, [x0], #1 cmp w2, w1 diff --git a/arch/arm64/lib/strcmp.S b/arch/arm64/lib/strcmp.S index 471fe61760ef..7d5d15398bfb 100644 --- a/arch/arm64/lib/strcmp.S +++ b/arch/arm64/lib/strcmp.S @@ -60,7 +60,7 @@ tmp3 .req x9 zeroones .req x10 pos .req x11 -ENTRY(strcmp) +WEAK(strcmp) eor tmp1, src1, src2 mov zeroones, #REP8_01 tst tmp1, #7 diff --git a/arch/arm64/lib/strlen.S b/arch/arm64/lib/strlen.S index 55ccc8e24c08..8e0b14205dcb 100644 --- a/arch/arm64/lib/strlen.S +++ b/arch/arm64/lib/strlen.S @@ -56,7 +56,7 @@ pos .req x12 #define REP8_7f 0x7f7f7f7f7f7f7f7f #define REP8_80 0x8080808080808080 -ENTRY(strlen) +WEAK(strlen) mov zeroones, #REP8_01 bic src, srcin, #15 ands tmp1, srcin, #15 diff --git a/arch/arm64/lib/strncmp.S b/arch/arm64/lib/strncmp.S index e267044761c6..66bd145935d9 100644 --- a/arch/arm64/lib/strncmp.S +++ b/arch/arm64/lib/strncmp.S @@ -64,7 +64,7 @@ limit_wd .req x13 mask .req x14 endloop .req x15 -ENTRY(strncmp) +WEAK(strncmp) cbz limit, .Lret0 eor tmp1, src1, src2 mov zeroones, #REP8_01 diff --git a/arch/arm64/lib/strnlen.S b/arch/arm64/lib/strnlen.S index eae38da6e0bb..355be04441fe 100644 --- a/arch/arm64/lib/strnlen.S +++ b/arch/arm64/lib/strnlen.S @@ -59,7 +59,7 @@ limit_wd .req x14 #define REP8_7f 0x7f7f7f7f7f7f7f7f #define REP8_80 0x8080808080808080 -ENTRY(strnlen) +WEAK(strnlen) cbz limit, .Lhit_limit mov zeroones, #REP8_01 bic src, srcin, #15 diff --git a/arch/arm64/lib/strrchr.S b/arch/arm64/lib/strrchr.S index f8e2784d5752..ea84924d5990 100644 --- a/arch/arm64/lib/strrchr.S +++ b/arch/arm64/lib/strrchr.S @@ -29,7 +29,7 @@ * Returns: * x0 - address of last occurrence of 'c' or 0 */ -ENTRY(strrchr) +WEAK(strrchr) mov x3, #0 and w1, w1, #0xff 1: ldrb w2, [x0], #1 diff --git a/arch/arm64/mm/context.c b/arch/arm64/mm/context.c index c127f94da8e2..1f0ea2facf24 100644 --- a/arch/arm64/mm/context.c +++ b/arch/arm64/mm/context.c @@ -88,7 +88,7 @@ void verify_cpu_asid_bits(void) } } -static void flush_context(unsigned int cpu) +static void flush_context(void) { int i; u64 asid; @@ -142,7 +142,7 @@ static bool check_update_reserved_asid(u64 asid, u64 newasid) return hit; } -static u64 new_context(struct mm_struct *mm, unsigned int cpu) +static u64 new_context(struct mm_struct *mm) { static u32 cur_idx = 1; u64 asid = atomic64_read(&mm->context.id); @@ -180,7 +180,7 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu) /* We're out of ASIDs, so increment the global generation count */ generation = atomic64_add_return_relaxed(ASID_FIRST_VERSION, &asid_generation); - flush_context(cpu); + flush_context(); /* We have more ASIDs than CPUs, so this will always succeed */ asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, 1); @@ -196,6 +196,9 @@ void check_and_switch_context(struct mm_struct *mm, unsigned int cpu) unsigned long flags; u64 asid, old_active_asid; + if (system_supports_cnp()) + cpu_set_reserved_ttbr0(); + asid = atomic64_read(&mm->context.id); /* @@ -223,7 +226,7 @@ void check_and_switch_context(struct mm_struct *mm, unsigned int cpu) /* Check that our ASID belongs to the current generation. */ asid = atomic64_read(&mm->context.id); if ((asid ^ atomic64_read(&asid_generation)) >> asid_bits) { - asid = new_context(mm, cpu); + asid = new_context(mm); atomic64_set(&mm->context.id, asid); } diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c index 072c51fb07d7..a3ac26284845 100644 --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -19,12 +19,13 @@ #include <linux/gfp.h> #include <linux/acpi.h> -#include <linux/bootmem.h> +#include <linux/memblock.h> #include <linux/cache.h> #include <linux/export.h> #include <linux/slab.h> #include <linux/genalloc.h> #include <linux/dma-direct.h> +#include <linux/dma-noncoherent.h> #include <linux/dma-contiguous.h> #include <linux/vmalloc.h> #include <linux/swiotlb.h> @@ -32,16 +33,6 @@ #include <asm/cacheflush.h> -static int swiotlb __ro_after_init; - -static pgprot_t __get_dma_pgprot(unsigned long attrs, pgprot_t prot, - bool coherent) -{ - if (!coherent || (attrs & DMA_ATTR_WRITE_COMBINE)) - return pgprot_writecombine(prot); - return prot; -} - static struct gen_pool *atomic_pool __ro_after_init; #define DEFAULT_DMA_COHERENT_POOL_SIZE SZ_256K @@ -91,18 +82,16 @@ static int __free_from_pool(void *start, size_t size) return 1; } -static void *__dma_alloc(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flags, - unsigned long attrs) +void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle, + gfp_t flags, unsigned long attrs) { struct page *page; void *ptr, *coherent_ptr; - bool coherent = is_device_dma_coherent(dev); - pgprot_t prot = __get_dma_pgprot(attrs, PAGE_KERNEL, false); + pgprot_t prot = pgprot_writecombine(PAGE_KERNEL); size = PAGE_ALIGN(size); - if (!coherent && !gfpflags_allow_blocking(flags)) { + if (!gfpflags_allow_blocking(flags)) { struct page *page = NULL; void *addr = __alloc_from_pool(size, &page, flags); @@ -112,14 +101,10 @@ static void *__dma_alloc(struct device *dev, size_t size, return addr; } - ptr = swiotlb_alloc(dev, size, dma_handle, flags, attrs); + ptr = dma_direct_alloc_pages(dev, size, dma_handle, flags, attrs); if (!ptr) goto no_mem; - /* no need for non-cacheable mapping if coherent */ - if (coherent) - return ptr; - /* remove any dirty cache lines on the kernel alias */ __dma_flush_area(ptr, size); @@ -133,130 +118,58 @@ static void *__dma_alloc(struct device *dev, size_t size, return coherent_ptr; no_map: - swiotlb_free(dev, size, ptr, *dma_handle, attrs); + dma_direct_free_pages(dev, size, ptr, *dma_handle, attrs); no_mem: return NULL; } -static void __dma_free(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle, - unsigned long attrs) +void arch_dma_free(struct device *dev, size_t size, void *vaddr, + dma_addr_t dma_handle, unsigned long attrs) { - void *swiotlb_addr = phys_to_virt(dma_to_phys(dev, dma_handle)); + if (!__free_from_pool(vaddr, PAGE_ALIGN(size))) { + void *kaddr = phys_to_virt(dma_to_phys(dev, dma_handle)); - size = PAGE_ALIGN(size); - - if (!is_device_dma_coherent(dev)) { - if (__free_from_pool(vaddr, size)) - return; vunmap(vaddr); + dma_direct_free_pages(dev, size, kaddr, dma_handle, attrs); } - swiotlb_free(dev, size, swiotlb_addr, dma_handle, attrs); } -static dma_addr_t __swiotlb_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction dir, - unsigned long attrs) +long arch_dma_coherent_to_pfn(struct device *dev, void *cpu_addr, + dma_addr_t dma_addr) { - dma_addr_t dev_addr; - - dev_addr = swiotlb_map_page(dev, page, offset, size, dir, attrs); - if (!is_device_dma_coherent(dev) && - (attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0) - __dma_map_area(phys_to_virt(dma_to_phys(dev, dev_addr)), size, dir); - - return dev_addr; -} - - -static void __swiotlb_unmap_page(struct device *dev, dma_addr_t dev_addr, - size_t size, enum dma_data_direction dir, - unsigned long attrs) -{ - if (!is_device_dma_coherent(dev) && - (attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0) - __dma_unmap_area(phys_to_virt(dma_to_phys(dev, dev_addr)), size, dir); - swiotlb_unmap_page(dev, dev_addr, size, dir, attrs); + return __phys_to_pfn(dma_to_phys(dev, dma_addr)); } -static int __swiotlb_map_sg_attrs(struct device *dev, struct scatterlist *sgl, - int nelems, enum dma_data_direction dir, - unsigned long attrs) +pgprot_t arch_dma_mmap_pgprot(struct device *dev, pgprot_t prot, + unsigned long attrs) { - struct scatterlist *sg; - int i, ret; - - ret = swiotlb_map_sg_attrs(dev, sgl, nelems, dir, attrs); - if (!is_device_dma_coherent(dev) && - (attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0) - for_each_sg(sgl, sg, ret, i) - __dma_map_area(phys_to_virt(dma_to_phys(dev, sg->dma_address)), - sg->length, dir); - - return ret; -} - -static void __swiotlb_unmap_sg_attrs(struct device *dev, - struct scatterlist *sgl, int nelems, - enum dma_data_direction dir, - unsigned long attrs) -{ - struct scatterlist *sg; - int i; - - if (!is_device_dma_coherent(dev) && - (attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0) - for_each_sg(sgl, sg, nelems, i) - __dma_unmap_area(phys_to_virt(dma_to_phys(dev, sg->dma_address)), - sg->length, dir); - swiotlb_unmap_sg_attrs(dev, sgl, nelems, dir, attrs); + if (!dev_is_dma_coherent(dev) || (attrs & DMA_ATTR_WRITE_COMBINE)) + return pgprot_writecombine(prot); + return prot; } -static void __swiotlb_sync_single_for_cpu(struct device *dev, - dma_addr_t dev_addr, size_t size, - enum dma_data_direction dir) +void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, + size_t size, enum dma_data_direction dir) { - if (!is_device_dma_coherent(dev)) - __dma_unmap_area(phys_to_virt(dma_to_phys(dev, dev_addr)), size, dir); - swiotlb_sync_single_for_cpu(dev, dev_addr, size, dir); + __dma_map_area(phys_to_virt(paddr), size, dir); } -static void __swiotlb_sync_single_for_device(struct device *dev, - dma_addr_t dev_addr, size_t size, - enum dma_data_direction dir) +void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, + size_t size, enum dma_data_direction dir) { - swiotlb_sync_single_for_device(dev, dev_addr, size, dir); - if (!is_device_dma_coherent(dev)) - __dma_map_area(phys_to_virt(dma_to_phys(dev, dev_addr)), size, dir); + __dma_unmap_area(phys_to_virt(paddr), size, dir); } -static void __swiotlb_sync_sg_for_cpu(struct device *dev, - struct scatterlist *sgl, int nelems, - enum dma_data_direction dir) +#ifdef CONFIG_IOMMU_DMA +static int __swiotlb_get_sgtable_page(struct sg_table *sgt, + struct page *page, size_t size) { - struct scatterlist *sg; - int i; - - if (!is_device_dma_coherent(dev)) - for_each_sg(sgl, sg, nelems, i) - __dma_unmap_area(phys_to_virt(dma_to_phys(dev, sg->dma_address)), - sg->length, dir); - swiotlb_sync_sg_for_cpu(dev, sgl, nelems, dir); -} + int ret = sg_alloc_table(sgt, 1, GFP_KERNEL); -static void __swiotlb_sync_sg_for_device(struct device *dev, - struct scatterlist *sgl, int nelems, - enum dma_data_direction dir) -{ - struct scatterlist *sg; - int i; + if (!ret) + sg_set_page(sgt->sgl, page, PAGE_ALIGN(size), 0); - swiotlb_sync_sg_for_device(dev, sgl, nelems, dir); - if (!is_device_dma_coherent(dev)) - for_each_sg(sgl, sg, nelems, i) - __dma_map_area(phys_to_virt(dma_to_phys(dev, sg->dma_address)), - sg->length, dir); + return ret; } static int __swiotlb_mmap_pfn(struct vm_area_struct *vma, @@ -276,74 +189,7 @@ static int __swiotlb_mmap_pfn(struct vm_area_struct *vma, return ret; } - -static int __swiotlb_mmap(struct device *dev, - struct vm_area_struct *vma, - void *cpu_addr, dma_addr_t dma_addr, size_t size, - unsigned long attrs) -{ - int ret; - unsigned long pfn = dma_to_phys(dev, dma_addr) >> PAGE_SHIFT; - - vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot, - is_device_dma_coherent(dev)); - - if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret)) - return ret; - - return __swiotlb_mmap_pfn(vma, pfn, size); -} - -static int __swiotlb_get_sgtable_page(struct sg_table *sgt, - struct page *page, size_t size) -{ - int ret = sg_alloc_table(sgt, 1, GFP_KERNEL); - - if (!ret) - sg_set_page(sgt->sgl, page, PAGE_ALIGN(size), 0); - - return ret; -} - -static int __swiotlb_get_sgtable(struct device *dev, struct sg_table *sgt, - void *cpu_addr, dma_addr_t handle, size_t size, - unsigned long attrs) -{ - struct page *page = phys_to_page(dma_to_phys(dev, handle)); - - return __swiotlb_get_sgtable_page(sgt, page, size); -} - -static int __swiotlb_dma_supported(struct device *hwdev, u64 mask) -{ - if (swiotlb) - return swiotlb_dma_supported(hwdev, mask); - return 1; -} - -static int __swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t addr) -{ - if (swiotlb) - return swiotlb_dma_mapping_error(hwdev, addr); - return 0; -} - -static const struct dma_map_ops arm64_swiotlb_dma_ops = { - .alloc = __dma_alloc, - .free = __dma_free, - .mmap = __swiotlb_mmap, - .get_sgtable = __swiotlb_get_sgtable, - .map_page = __swiotlb_map_page, - .unmap_page = __swiotlb_unmap_page, - .map_sg = __swiotlb_map_sg_attrs, - .unmap_sg = __swiotlb_unmap_sg_attrs, - .sync_single_for_cpu = __swiotlb_sync_single_for_cpu, - .sync_single_for_device = __swiotlb_sync_single_for_device, - .sync_sg_for_cpu = __swiotlb_sync_sg_for_cpu, - .sync_sg_for_device = __swiotlb_sync_sg_for_device, - .dma_supported = __swiotlb_dma_supported, - .mapping_error = __swiotlb_dma_mapping_error, -}; +#endif /* CONFIG_IOMMU_DMA */ static int __init atomic_pool_init(void) { @@ -500,10 +346,6 @@ EXPORT_SYMBOL(dummy_dma_ops); static int __init arm64_dma_init(void) { - if (swiotlb_force == SWIOTLB_FORCE || - max_pfn > (arm64_dma_phys_limit >> PAGE_SHIFT)) - swiotlb = 1; - WARN_TAINT(ARCH_DMA_MINALIGN < cache_line_size(), TAINT_CPU_OUT_OF_SPEC, "ARCH_DMA_MINALIGN smaller than CTR_EL0.CWG (%d < %d)", @@ -528,7 +370,7 @@ static void *__iommu_alloc_attrs(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, unsigned long attrs) { - bool coherent = is_device_dma_coherent(dev); + bool coherent = dev_is_dma_coherent(dev); int ioprot = dma_info_to_prot(DMA_BIDIRECTIONAL, coherent, attrs); size_t iosize = size; void *addr; @@ -569,7 +411,7 @@ static void *__iommu_alloc_attrs(struct device *dev, size_t size, addr = NULL; } } else if (attrs & DMA_ATTR_FORCE_CONTIGUOUS) { - pgprot_t prot = __get_dma_pgprot(attrs, PAGE_KERNEL, coherent); + pgprot_t prot = arch_dma_mmap_pgprot(dev, PAGE_KERNEL, attrs); struct page *page; page = dma_alloc_from_contiguous(dev, size >> PAGE_SHIFT, @@ -596,7 +438,7 @@ static void *__iommu_alloc_attrs(struct device *dev, size_t size, size >> PAGE_SHIFT); } } else { - pgprot_t prot = __get_dma_pgprot(attrs, PAGE_KERNEL, coherent); + pgprot_t prot = arch_dma_mmap_pgprot(dev, PAGE_KERNEL, attrs); struct page **pages; pages = iommu_dma_alloc(dev, iosize, gfp, attrs, ioprot, @@ -658,8 +500,7 @@ static int __iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma, struct vm_struct *area; int ret; - vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot, - is_device_dma_coherent(dev)); + vma->vm_page_prot = arch_dma_mmap_pgprot(dev, vma->vm_page_prot, attrs); if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret)) return ret; @@ -709,11 +550,11 @@ static void __iommu_sync_single_for_cpu(struct device *dev, { phys_addr_t phys; - if (is_device_dma_coherent(dev)) + if (dev_is_dma_coherent(dev)) return; - phys = iommu_iova_to_phys(iommu_get_domain_for_dev(dev), dev_addr); - __dma_unmap_area(phys_to_virt(phys), size, dir); + phys = iommu_iova_to_phys(iommu_get_dma_domain(dev), dev_addr); + arch_sync_dma_for_cpu(dev, phys, size, dir); } static void __iommu_sync_single_for_device(struct device *dev, @@ -722,11 +563,11 @@ static void __iommu_sync_single_for_device(struct device *dev, { phys_addr_t phys; - if (is_device_dma_coherent(dev)) + if (dev_is_dma_coherent(dev)) return; - phys = iommu_iova_to_phys(iommu_get_domain_for_dev(dev), dev_addr); - __dma_map_area(phys_to_virt(phys), size, dir); + phys = iommu_iova_to_phys(iommu_get_dma_domain(dev), dev_addr); + arch_sync_dma_for_device(dev, phys, size, dir); } static dma_addr_t __iommu_map_page(struct device *dev, struct page *page, @@ -734,13 +575,13 @@ static dma_addr_t __iommu_map_page(struct device *dev, struct page *page, enum dma_data_direction dir, unsigned long attrs) { - bool coherent = is_device_dma_coherent(dev); + bool coherent = dev_is_dma_coherent(dev); int prot = dma_info_to_prot(dir, coherent, attrs); dma_addr_t dev_addr = iommu_dma_map_page(dev, page, offset, size, prot); - if (!iommu_dma_mapping_error(dev, dev_addr) && - (attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0) - __iommu_sync_single_for_device(dev, dev_addr, size, dir); + if (!coherent && !(attrs & DMA_ATTR_SKIP_CPU_SYNC) && + !iommu_dma_mapping_error(dev, dev_addr)) + __dma_map_area(page_address(page) + offset, size, dir); return dev_addr; } @@ -762,11 +603,11 @@ static void __iommu_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg; int i; - if (is_device_dma_coherent(dev)) + if (dev_is_dma_coherent(dev)) return; for_each_sg(sgl, sg, nelems, i) - __dma_unmap_area(sg_virt(sg), sg->length, dir); + arch_sync_dma_for_cpu(dev, sg_phys(sg), sg->length, dir); } static void __iommu_sync_sg_for_device(struct device *dev, @@ -776,18 +617,18 @@ static void __iommu_sync_sg_for_device(struct device *dev, struct scatterlist *sg; int i; - if (is_device_dma_coherent(dev)) + if (dev_is_dma_coherent(dev)) return; for_each_sg(sgl, sg, nelems, i) - __dma_map_area(sg_virt(sg), sg->length, dir); + arch_sync_dma_for_device(dev, sg_phys(sg), sg->length, dir); } static int __iommu_map_sg_attrs(struct device *dev, struct scatterlist *sgl, int nelems, enum dma_data_direction dir, unsigned long attrs) { - bool coherent = is_device_dma_coherent(dev); + bool coherent = dev_is_dma_coherent(dev); if ((attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0) __iommu_sync_sg_for_device(dev, sgl, nelems, dir); @@ -879,9 +720,9 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, const struct iommu_ops *iommu, bool coherent) { if (!dev->dma_ops) - dev->dma_ops = &arm64_swiotlb_dma_ops; + dev->dma_ops = &swiotlb_dma_ops; - dev->archdata.dma_coherent = coherent; + dev->dma_coherent = coherent; __iommu_setup_dma_ops(dev, dma_base, size, iommu); #ifdef CONFIG_XEN diff --git a/arch/arm64/mm/dump.c b/arch/arm64/mm/dump.c index 65dfc8571bf8..fcb1f2a6d7c6 100644 --- a/arch/arm64/mm/dump.c +++ b/arch/arm64/mm/dump.c @@ -36,8 +36,8 @@ static const struct addr_marker address_markers[] = { #endif { MODULES_VADDR, "Modules start" }, { MODULES_END, "Modules end" }, - { VMALLOC_START, "vmalloc() Area" }, - { VMALLOC_END, "vmalloc() End" }, + { VMALLOC_START, "vmalloc() area" }, + { VMALLOC_END, "vmalloc() end" }, { FIXADDR_START, "Fixmap start" }, { FIXADDR_TOP, "Fixmap end" }, { PCI_IO_START, "PCI I/O start" }, @@ -46,7 +46,7 @@ static const struct addr_marker address_markers[] = { { VMEMMAP_START, "vmemmap start" }, { VMEMMAP_START + VMEMMAP_SIZE, "vmemmap end" }, #endif - { PAGE_OFFSET, "Linear Mapping" }, + { PAGE_OFFSET, "Linear mapping" }, { -1, NULL }, }; diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 50b30ff30de4..7d9571f4ae3d 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -37,6 +37,7 @@ #include <asm/cmpxchg.h> #include <asm/cpufeature.h> #include <asm/exception.h> +#include <asm/daifflags.h> #include <asm/debug-monitors.h> #include <asm/esr.h> #include <asm/sysreg.h> @@ -56,10 +57,16 @@ struct fault_info { }; static const struct fault_info fault_info[]; +static struct fault_info debug_fault_info[]; static inline const struct fault_info *esr_to_fault_info(unsigned int esr) { - return fault_info + (esr & 63); + return fault_info + (esr & ESR_ELx_FSC); +} + +static inline const struct fault_info *esr_to_debug_fault_info(unsigned int esr) +{ + return debug_fault_info + DBG_ESR_EVT(esr); } #ifdef CONFIG_KPROBES @@ -235,9 +242,8 @@ static bool is_el1_instruction_abort(unsigned int esr) return ESR_ELx_EC(esr) == ESR_ELx_EC_IABT_CUR; } -static inline bool is_el1_permission_fault(unsigned int esr, - struct pt_regs *regs, - unsigned long addr) +static inline bool is_el1_permission_fault(unsigned long addr, unsigned int esr, + struct pt_regs *regs) { unsigned int ec = ESR_ELx_EC(esr); unsigned int fsc_type = esr & ESR_ELx_FSC_TYPE; @@ -283,7 +289,7 @@ static void __do_kernel_fault(unsigned long addr, unsigned int esr, if (!is_el1_instruction_abort(esr) && fixup_exception(regs)) return; - if (is_el1_permission_fault(esr, regs, addr)) { + if (is_el1_permission_fault(addr, esr, regs)) { if (esr & ESR_ELx_WNR) msg = "write to read-only memory"; else @@ -297,9 +303,9 @@ static void __do_kernel_fault(unsigned long addr, unsigned int esr, die_kernel_fault(msg, addr, esr, regs); } -static void __do_user_fault(struct siginfo *info, unsigned int esr) +static void set_thread_esr(unsigned long address, unsigned int esr) { - current->thread.fault_address = (unsigned long)info->si_addr; + current->thread.fault_address = address; /* * If the faulting address is in the kernel, we must sanitize the ESR. @@ -352,7 +358,6 @@ static void __do_user_fault(struct siginfo *info, unsigned int esr) } current->thread.fault_code = esr; - arm64_force_sig_info(info, esr_to_fault_info(esr)->name, current); } static void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *regs) @@ -363,14 +368,10 @@ static void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *re */ if (user_mode(regs)) { const struct fault_info *inf = esr_to_fault_info(esr); - struct siginfo si; - - clear_siginfo(&si); - si.si_signo = inf->sig; - si.si_code = inf->code; - si.si_addr = (void __user *)addr; - __do_user_fault(&si, esr); + set_thread_esr(addr, esr); + arm64_force_sig_fault(inf->sig, inf->code, (void __user *)addr, + inf->name); } else { __do_kernel_fault(addr, esr, regs); } @@ -424,9 +425,9 @@ static bool is_el0_instruction_abort(unsigned int esr) static int __kprobes do_page_fault(unsigned long addr, unsigned int esr, struct pt_regs *regs) { + const struct fault_info *inf; struct task_struct *tsk; struct mm_struct *mm; - struct siginfo si; vm_fault_t fault, major = 0; unsigned long vm_flags = VM_READ | VM_WRITE; unsigned int mm_flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; @@ -454,7 +455,7 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr, mm_flags |= FAULT_FLAG_WRITE; } - if (addr < TASK_SIZE && is_el1_permission_fault(esr, regs, addr)) { + if (addr < TASK_SIZE && is_el1_permission_fault(addr, esr, regs)) { /* regs->orig_addr_limit may be 0 if we entered from EL0 */ if (regs->orig_addr_limit == KERNEL_DS) die_kernel_fault("access to user memory with fs=KERNEL_DS", @@ -562,37 +563,35 @@ retry: return 0; } - clear_siginfo(&si); - si.si_addr = (void __user *)addr; - + inf = esr_to_fault_info(esr); + set_thread_esr(addr, esr); if (fault & VM_FAULT_SIGBUS) { /* * We had some memory, but were unable to successfully fix up * this page fault. */ - si.si_signo = SIGBUS; - si.si_code = BUS_ADRERR; - } else if (fault & VM_FAULT_HWPOISON_LARGE) { - unsigned int hindex = VM_FAULT_GET_HINDEX(fault); - - si.si_signo = SIGBUS; - si.si_code = BUS_MCEERR_AR; - si.si_addr_lsb = hstate_index_to_shift(hindex); - } else if (fault & VM_FAULT_HWPOISON) { - si.si_signo = SIGBUS; - si.si_code = BUS_MCEERR_AR; - si.si_addr_lsb = PAGE_SHIFT; + arm64_force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *)addr, + inf->name); + } else if (fault & (VM_FAULT_HWPOISON_LARGE | VM_FAULT_HWPOISON)) { + unsigned int lsb; + + lsb = PAGE_SHIFT; + if (fault & VM_FAULT_HWPOISON_LARGE) + lsb = hstate_index_to_shift(VM_FAULT_GET_HINDEX(fault)); + + arm64_force_sig_mceerr(BUS_MCEERR_AR, (void __user *)addr, lsb, + inf->name); } else { /* * Something tried to access memory that isn't in our memory * map. */ - si.si_signo = SIGSEGV; - si.si_code = fault == VM_FAULT_BADACCESS ? - SEGV_ACCERR : SEGV_MAPERR; + arm64_force_sig_fault(SIGSEGV, + fault == VM_FAULT_BADACCESS ? SEGV_ACCERR : SEGV_MAPERR, + (void __user *)addr, + inf->name); } - __do_user_fault(&si, esr); return 0; no_context: @@ -625,8 +624,8 @@ static int do_bad(unsigned long addr, unsigned int esr, struct pt_regs *regs) static int do_sea(unsigned long addr, unsigned int esr, struct pt_regs *regs) { - struct siginfo info; const struct fault_info *inf; + void __user *siaddr; inf = esr_to_fault_info(esr); @@ -645,15 +644,11 @@ static int do_sea(unsigned long addr, unsigned int esr, struct pt_regs *regs) nmi_exit(); } - clear_siginfo(&info); - info.si_signo = inf->sig; - info.si_errno = 0; - info.si_code = inf->code; if (esr & ESR_ELx_FnV) - info.si_addr = NULL; + siaddr = NULL; else - info.si_addr = (void __user *)addr; - arm64_notify_die(inf->name, regs, &info, esr); + siaddr = (void __user *)addr; + arm64_notify_die(inf->name, regs, inf->sig, inf->code, siaddr, esr); return 0; } @@ -734,7 +729,6 @@ asmlinkage void __exception do_mem_abort(unsigned long addr, unsigned int esr, struct pt_regs *regs) { const struct fault_info *inf = esr_to_fault_info(esr); - struct siginfo info; if (!inf->fn(addr, esr, regs)) return; @@ -745,12 +739,8 @@ asmlinkage void __exception do_mem_abort(unsigned long addr, unsigned int esr, show_pte(addr); } - clear_siginfo(&info); - info.si_signo = inf->sig; - info.si_errno = 0; - info.si_code = inf->code; - info.si_addr = (void __user *)addr; - arm64_notify_die(inf->name, regs, &info, esr); + arm64_notify_die(inf->name, regs, + inf->sig, inf->code, (void __user *)addr, esr); } asmlinkage void __exception do_el0_irq_bp_hardening(void) @@ -771,7 +761,7 @@ asmlinkage void __exception do_el0_ia_bp_hardening(unsigned long addr, if (addr > TASK_SIZE) arm64_apply_bp_hardening(); - local_irq_enable(); + local_daif_restore(DAIF_PROCCTX); do_mem_abort(addr, esr, regs); } @@ -780,20 +770,14 @@ asmlinkage void __exception do_sp_pc_abort(unsigned long addr, unsigned int esr, struct pt_regs *regs) { - struct siginfo info; - if (user_mode(regs)) { if (instruction_pointer(regs) > TASK_SIZE) arm64_apply_bp_hardening(); - local_irq_enable(); + local_daif_restore(DAIF_PROCCTX); } - clear_siginfo(&info); - info.si_signo = SIGBUS; - info.si_errno = 0; - info.si_code = BUS_ADRALN; - info.si_addr = (void __user *)addr; - arm64_notify_die("SP/PC alignment exception", regs, &info, esr); + arm64_notify_die("SP/PC alignment exception", regs, + SIGBUS, BUS_ADRALN, (void __user *)addr, esr); } int __init early_brk64(unsigned long addr, unsigned int esr, @@ -831,7 +815,7 @@ asmlinkage int __exception do_debug_exception(unsigned long addr, unsigned int esr, struct pt_regs *regs) { - const struct fault_info *inf = debug_fault_info + DBG_ESR_EVT(esr); + const struct fault_info *inf = esr_to_debug_fault_info(esr); int rv; /* @@ -847,14 +831,8 @@ asmlinkage int __exception do_debug_exception(unsigned long addr, if (!inf->fn(addr, esr, regs)) { rv = 1; } else { - struct siginfo info; - - clear_siginfo(&info); - info.si_signo = inf->sig; - info.si_errno = 0; - info.si_code = inf->code; - info.si_addr = (void __user *)addr; - arm64_notify_die(inf->name, regs, &info, esr); + arm64_notify_die(inf->name, regs, + inf->sig, inf->code, (void __user *)addr, esr); rv = 0; } @@ -864,17 +842,3 @@ asmlinkage int __exception do_debug_exception(unsigned long addr, return rv; } NOKPROBE_SYMBOL(do_debug_exception); - -#ifdef CONFIG_ARM64_PAN -void cpu_enable_pan(const struct arm64_cpu_capabilities *__unused) -{ - /* - * We modify PSTATE. This won't work from irq context as the PSTATE - * is discarded once we return from the exception. - */ - WARN_ON_ONCE(in_interrupt()); - - sysreg_clear_set(sctlr_el1, SCTLR_EL1_SPAN, 0); - asm(SET_PSTATE_PAN(1)); -} -#endif /* CONFIG_ARM64_PAN */ diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c index 192b3ba07075..f58ea503ad01 100644 --- a/arch/arm64/mm/hugetlbpage.c +++ b/arch/arm64/mm/hugetlbpage.c @@ -117,11 +117,14 @@ static pte_t get_clear_flush(struct mm_struct *mm, /* * If HW_AFDBM is enabled, then the HW could turn on - * the dirty bit for any page in the set, so check - * them all. All hugetlb entries are already young. + * the dirty or accessed bit for any page in the set, + * so check them all. */ if (pte_dirty(pte)) orig_pte = pte_mkdirty(orig_pte); + + if (pte_young(pte)) + orig_pte = pte_mkyoung(orig_pte); } if (valid) { @@ -320,11 +323,40 @@ pte_t huge_ptep_get_and_clear(struct mm_struct *mm, return get_clear_flush(mm, addr, ptep, pgsize, ncontig); } +/* + * huge_ptep_set_access_flags will update access flags (dirty, accesssed) + * and write permission. + * + * For a contiguous huge pte range we need to check whether or not write + * permission has to change only on the first pte in the set. Then for + * all the contiguous ptes we need to check whether or not there is a + * discrepancy between dirty or young. + */ +static int __cont_access_flags_changed(pte_t *ptep, pte_t pte, int ncontig) +{ + int i; + + if (pte_write(pte) != pte_write(huge_ptep_get(ptep))) + return 1; + + for (i = 0; i < ncontig; i++) { + pte_t orig_pte = huge_ptep_get(ptep + i); + + if (pte_dirty(pte) != pte_dirty(orig_pte)) + return 1; + + if (pte_young(pte) != pte_young(orig_pte)) + return 1; + } + + return 0; +} + int huge_ptep_set_access_flags(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep, pte_t pte, int dirty) { - int ncontig, i, changed = 0; + int ncontig, i; size_t pgsize = 0; unsigned long pfn = pte_pfn(pte), dpfn; pgprot_t hugeprot; @@ -336,19 +368,23 @@ int huge_ptep_set_access_flags(struct vm_area_struct *vma, ncontig = find_num_contig(vma->vm_mm, addr, ptep, &pgsize); dpfn = pgsize >> PAGE_SHIFT; + if (!__cont_access_flags_changed(ptep, pte, ncontig)) + return 0; + orig_pte = get_clear_flush(vma->vm_mm, addr, ptep, pgsize, ncontig); - if (!pte_same(orig_pte, pte)) - changed = 1; - /* Make sure we don't lose the dirty state */ + /* Make sure we don't lose the dirty or young state */ if (pte_dirty(orig_pte)) pte = pte_mkdirty(pte); + if (pte_young(orig_pte)) + pte = pte_mkyoung(pte); + hugeprot = pte_pgprot(pte); for (i = 0; i < ncontig; i++, ptep++, addr += pgsize, pfn += dpfn) set_pte_at(vma->vm_mm, addr, ptep, pfn_pte(pfn, hugeprot)); - return changed; + return 1; } void huge_ptep_set_wrprotect(struct mm_struct *mm, diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 787e27964ab9..9d9582cac6c4 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -22,7 +22,6 @@ #include <linux/errno.h> #include <linux/swap.h> #include <linux/init.h> -#include <linux/bootmem.h> #include <linux/cache.h> #include <linux/mman.h> #include <linux/nodemask.h> @@ -284,7 +283,6 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max) #endif /* CONFIG_NUMA */ -#ifdef CONFIG_HAVE_ARCH_PFN_VALID int pfn_valid(unsigned long pfn) { phys_addr_t addr = pfn << PAGE_SHIFT; @@ -294,7 +292,6 @@ int pfn_valid(unsigned long pfn) return memblock_is_map_memory(addr); } EXPORT_SYMBOL(pfn_valid); -#endif #ifndef CONFIG_SPARSEMEM static void __init arm64_memory_present(void) @@ -538,7 +535,7 @@ static inline void free_memmap(unsigned long start_pfn, unsigned long end_pfn) * memmap array. */ if (pg < pgend) - free_bootmem(pg, pgend - pg); + memblock_free(pg, pgend - pg); } /* @@ -601,7 +598,7 @@ void __init mem_init(void) free_unused_memmap(); #endif /* this will put all unused low memory onto the freelists */ - free_all_bootmem(); + memblock_free_all(); kexec_reserve_crashkres_pages(); diff --git a/arch/arm64/mm/kasan_init.c b/arch/arm64/mm/kasan_init.c index 12145874c02b..63527e585aac 100644 --- a/arch/arm64/mm/kasan_init.c +++ b/arch/arm64/mm/kasan_init.c @@ -11,7 +11,6 @@ */ #define pr_fmt(fmt) "kasan: " fmt -#include <linux/bootmem.h> #include <linux/kasan.h> #include <linux/kernel.h> #include <linux/sched/task.h> @@ -38,7 +37,7 @@ static pgd_t tmp_pg_dir[PTRS_PER_PGD] __initdata __aligned(PGD_SIZE); static phys_addr_t __init kasan_alloc_zeroed_page(int node) { - void *p = memblock_virt_alloc_try_nid(PAGE_SIZE, PAGE_SIZE, + void *p = memblock_alloc_try_nid(PAGE_SIZE, PAGE_SIZE, __pa(MAX_DMA_ADDRESS), MEMBLOCK_ALLOC_ACCESSIBLE, node); return __pa(p); @@ -192,7 +191,7 @@ void __init kasan_init(void) /* * We are going to perform proper setup of shadow memory. - * At first we should unmap early shadow (clear_pgds() call bellow). + * At first we should unmap early shadow (clear_pgds() call below). * However, instrumented code couldn't execute without shadow memory. * tmp_pg_dir used to keep early shadow mapped until full shadow * setup will be finished. diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index 65f86271f02b..394b8d554def 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -67,6 +67,24 @@ static pte_t bm_pte[PTRS_PER_PTE] __page_aligned_bss; static pmd_t bm_pmd[PTRS_PER_PMD] __page_aligned_bss __maybe_unused; static pud_t bm_pud[PTRS_PER_PUD] __page_aligned_bss __maybe_unused; +static DEFINE_SPINLOCK(swapper_pgdir_lock); + +void set_swapper_pgd(pgd_t *pgdp, pgd_t pgd) +{ + pgd_t *fixmap_pgdp; + + spin_lock(&swapper_pgdir_lock); + fixmap_pgdp = pgd_set_fixmap(__pa_symbol(pgdp)); + WRITE_ONCE(*fixmap_pgdp, pgd); + /* + * We need dsb(ishst) here to ensure the page-table-walker sees + * our new entry before set_p?d() returns. The fixmap's + * flush_tlb_kernel_range() via clear_fixmap() does this for us. + */ + pgd_clear_fixmap(); + spin_unlock(&swapper_pgdir_lock); +} + pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, unsigned long size, pgprot_t vma_prot) { @@ -83,7 +101,7 @@ static phys_addr_t __init early_pgtable_alloc(void) phys_addr_t phys; void *ptr; - phys = memblock_alloc(PAGE_SIZE, PAGE_SIZE); + phys = memblock_phys_alloc(PAGE_SIZE, PAGE_SIZE); /* * The FIX_{PGD,PUD,PMD} slots may be in active use, but the FIX_PTE @@ -629,34 +647,18 @@ static void __init map_kernel(pgd_t *pgdp) */ void __init paging_init(void) { - phys_addr_t pgd_phys = early_pgtable_alloc(); - pgd_t *pgdp = pgd_set_fixmap(pgd_phys); + pgd_t *pgdp = pgd_set_fixmap(__pa_symbol(swapper_pg_dir)); map_kernel(pgdp); map_mem(pgdp); - /* - * We want to reuse the original swapper_pg_dir so we don't have to - * communicate the new address to non-coherent secondaries in - * secondary_entry, and so cpu_switch_mm can generate the address with - * adrp+add rather than a load from some global variable. - * - * To do this we need to go via a temporary pgd. - */ - cpu_replace_ttbr1(__va(pgd_phys)); - memcpy(swapper_pg_dir, pgdp, PGD_SIZE); - cpu_replace_ttbr1(lm_alias(swapper_pg_dir)); - pgd_clear_fixmap(); - memblock_free(pgd_phys, PAGE_SIZE); - /* - * We only reuse the PGD from the swapper_pg_dir, not the pud + pmd - * allocated with it. - */ - memblock_free(__pa_symbol(swapper_pg_dir) + PAGE_SIZE, - __pa_symbol(swapper_pg_end) - __pa_symbol(swapper_pg_dir) - - PAGE_SIZE); + cpu_replace_ttbr1(lm_alias(swapper_pg_dir)); + init_mm.pgd = swapper_pg_dir; + + memblock_free(__pa_symbol(init_pg_dir), + __pa_symbol(init_pg_end) - __pa_symbol(init_pg_dir)); } /* @@ -985,8 +987,9 @@ int pmd_free_pte_page(pmd_t *pmdp, unsigned long addr) pmd = READ_ONCE(*pmdp); - /* No-op for empty entry and WARN_ON for valid entry */ - if (!pmd_present(pmd) || !pmd_table(pmd)) { + if (!pmd_present(pmd)) + return 1; + if (!pmd_table(pmd)) { VM_WARN_ON(!pmd_table(pmd)); return 1; } @@ -1007,8 +1010,9 @@ int pud_free_pmd_page(pud_t *pudp, unsigned long addr) pud = READ_ONCE(*pudp); - /* No-op for empty entry and WARN_ON for valid entry */ - if (!pud_present(pud) || !pud_table(pud)) { + if (!pud_present(pud)) + return 1; + if (!pud_table(pud)) { VM_WARN_ON(!pud_table(pud)); return 1; } diff --git a/arch/arm64/mm/numa.c b/arch/arm64/mm/numa.c index 146c04ceaa51..27a31efd9e8e 100644 --- a/arch/arm64/mm/numa.c +++ b/arch/arm64/mm/numa.c @@ -20,7 +20,6 @@ #define pr_fmt(fmt) "NUMA: " fmt #include <linux/acpi.h> -#include <linux/bootmem.h> #include <linux/memblock.h> #include <linux/module.h> #include <linux/of.h> @@ -168,7 +167,7 @@ static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, { int nid = early_cpu_to_node(cpu); - return memblock_virt_alloc_try_nid(size, align, + return memblock_alloc_try_nid(size, align, __pa(MAX_DMA_ADDRESS), MEMBLOCK_ALLOC_ACCESSIBLE, nid); } @@ -237,7 +236,7 @@ static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn) if (start_pfn >= end_pfn) pr_info("Initmem setup node %d [<memory-less node>]\n", nid); - nd_pa = memblock_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid); + nd_pa = memblock_phys_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid); nd = __va(nd_pa); /* report and initialize */ @@ -391,7 +390,6 @@ static int __init numa_init(int (*init_func)(void)) nodes_clear(numa_nodes_parsed); nodes_clear(node_possible_map); nodes_clear(node_online_map); - numa_free_distance(); ret = numa_alloc_distance(); if (ret < 0) @@ -399,20 +397,24 @@ static int __init numa_init(int (*init_func)(void)) ret = init_func(); if (ret < 0) - return ret; + goto out_free_distance; if (nodes_empty(numa_nodes_parsed)) { pr_info("No NUMA configuration found\n"); - return -EINVAL; + ret = -EINVAL; + goto out_free_distance; } ret = numa_register_nodes(); if (ret < 0) - return ret; + goto out_free_distance; setup_node_to_cpumask_map(); return 0; +out_free_distance: + numa_free_distance(); + return ret; } /** @@ -432,7 +434,7 @@ static int __init dummy_numa_init(void) if (numa_off) pr_info("NUMA disabled\n"); /* Forced off on command line. */ pr_info("Faking a node at [mem %#018Lx-%#018Lx]\n", - 0LLU, PFN_PHYS(max_pfn) - 1); + memblock_start_of_DRAM(), memblock_end_of_DRAM() - 1); for_each_memblock(memory, mblk) { ret = numa_add_memblk(0, mblk->base, mblk->base + mblk->size); diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index 03646e6a2ef4..2c75b0b903ae 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -160,6 +160,12 @@ ENTRY(cpu_do_switch_mm) mrs x2, ttbr1_el1 mmid x1, x1 // get mm->context.id phys_to_ttbr x3, x0 + +alternative_if ARM64_HAS_CNP + cbz x1, 1f // skip CNP for reserved ASID + orr x3, x3, #TTBR_CNP_BIT +1: +alternative_else_nop_endif #ifdef CONFIG_ARM64_SW_TTBR0_PAN bfi x3, x1, #48, #16 // set the ASID field in TTBR0 #endif @@ -184,7 +190,7 @@ ENDPROC(cpu_do_switch_mm) .endm /* - * void idmap_cpu_replace_ttbr1(phys_addr_t new_pgd) + * void idmap_cpu_replace_ttbr1(phys_addr_t ttbr1) * * This is the low-level counterpart to cpu_replace_ttbr1, and should not be * called by anything else. It can only be executed from a TTBR0 mapping. @@ -194,8 +200,7 @@ ENTRY(idmap_cpu_replace_ttbr1) __idmap_cpu_set_reserved_ttbr1 x1, x3 - phys_to_ttbr x3, x0 - msr ttbr1_el1, x3 + msr ttbr1_el1, x0 isb restore_daif x2 |