diff options
Diffstat (limited to 'arch/arm')
286 files changed, 13957 insertions, 6179 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2d70cece2ea2..1f254bd6c937 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -671,6 +671,7 @@ config ARCH_S5P6440 select CPU_V6 select GENERIC_GPIO select HAVE_CLK + select ARCH_USES_GETTIMEOFFSET help Samsung S5P6440 CPU based systems @@ -679,17 +680,19 @@ config ARCH_S5P6442 select CPU_V6 select GENERIC_GPIO select HAVE_CLK + select ARCH_USES_GETTIMEOFFSET help Samsung S5P6442 CPU based systems -config ARCH_S5PC1XX - bool "Samsung S5PC1XX" +config ARCH_S5PC100 + bool "Samsung S5PC100" select GENERIC_GPIO select HAVE_CLK select CPU_V7 select ARM_L1_CACHE_SHIFT_6 + select ARCH_USES_GETTIMEOFFSET help - Samsung S5PC1XX series based systems + Samsung S5PC100 series based systems config ARCH_S5PV210 bool "Samsung S5PV210/S5PC110" @@ -697,6 +700,7 @@ config ARCH_S5PV210 select GENERIC_GPIO select HAVE_CLK select ARM_L1_CACHE_SHIFT_6 + select ARCH_USES_GETTIMEOFFSET help Samsung S5PV210/S5PC110 series based systems @@ -876,7 +880,7 @@ source "arch/arm/mach-sa1100/Kconfig" source "arch/arm/plat-samsung/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" source "arch/arm/plat-s5p/Kconfig" -source "arch/arm/plat-s5pc1xx/Kconfig" + source "arch/arm/plat-spear/Kconfig" if ARCH_S3C2410 @@ -896,9 +900,7 @@ source "arch/arm/mach-s5p6440/Kconfig" source "arch/arm/mach-s5p6442/Kconfig" -if ARCH_S5PC1XX source "arch/arm/mach-s5pc100/Kconfig" -endif source "arch/arm/mach-s5pv210/Kconfig" @@ -1419,6 +1421,17 @@ config CMDLINE time by entering them here. As a minimum, you should specify the memory size and the root device (e.g., mem=64M root=/dev/nfs). +config CMDLINE_FORCE + bool "Always use the default kernel command string" + depends on CMDLINE != "" + help + Always use the default kernel command string, even if the boot + loader passes other arguments to the kernel. + This is useful if you cannot or don't want to change the + command-line options your boot loader passes to the kernel. + + If unsure, say N. + config XIP_KERNEL bool "Kernel Execute-In-Place from ROM" depends on !ZBOOT_ROM diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 4b857fbe4314..64ba313724d2 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -168,7 +168,7 @@ machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx machine-$(CONFIG_ARCH_S5P6440) := s5p6440 machine-$(CONFIG_ARCH_S5P6442) := s5p6442 -machine-$(CONFIG_ARCH_S5PC1XX) := s5pc100 +machine-$(CONFIG_ARCH_S5PC100) := s5pc100 machine-$(CONFIG_ARCH_S5PV210) := s5pv210 machine-$(CONFIG_ARCH_SA1100) := sa1100 machine-$(CONFIG_ARCH_SHARK) := shark @@ -198,7 +198,6 @@ plat-$(CONFIG_PLAT_NOMADIK) := nomadik plat-$(CONFIG_PLAT_ORION) := orion plat-$(CONFIG_PLAT_PXA) := pxa plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung -plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx samsung plat-$(CONFIG_PLAT_S5P) := s5p samsung plat-$(CONFIG_PLAT_SPEAR) := spear plat-$(CONFIG_PLAT_VERSATILE) := versatile diff --git a/arch/arm/boot/bootp/bootp.lds b/arch/arm/boot/bootp/bootp.lds index 8e3d81ce695e..fc54394f4340 100644 --- a/arch/arm/boot/bootp/bootp.lds +++ b/arch/arm/boot/bootp/bootp.lds @@ -19,7 +19,7 @@ SECTIONS initrd_size = initrd_end - initrd_start; _etext = .; } - + .stab 0 : { *(.stab) } .stabstr 0 : { *(.stabstr) } .stab.excl 0 : { *(.stab.excl) } diff --git a/arch/arm/configs/am3517_evm_defconfig b/arch/arm/configs/am3517_evm_defconfig index 66a10b50d938..e4f4fb522bac 100644 --- a/arch/arm/configs/am3517_evm_defconfig +++ b/arch/arm/configs/am3517_evm_defconfig @@ -422,15 +422,29 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set +CONFIG_CAN=y +CONFIG_CAN_RAW=y +CONFIG_CAN_BCM=y + +# +# CAN Device Drivers +# +CONFIG_CAN_VCAN=y +CONFIG_CAN_DEV=y +CONFIG_CAN_CALC_BITTIMING=y +CONFIG_CAN_TI_HECC=y +# CONFIG_CAN_SJA1000 is not set + +# +# CAN USB interfaces +# +# CONFIG_CAN_EMS_USB is not set +CONFIG_CAN_DEBUG_DEVICES=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -517,7 +531,75 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set -# CONFIG_NETDEVICES is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +CONFIG_TI_DAVINCI_EMAC=y +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -692,7 +774,57 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_ARMCLCD is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_OMAP2_VRAM=y +CONFIG_OMAP2_VRFB=y +CONFIG_OMAP2_DSS=y +CONFIG_OMAP2_VRAM_SIZE=4 +CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y +# CONFIG_OMAP2_DSS_RFBI is not set +CONFIG_OMAP2_DSS_VENC=y +# CONFIG_OMAP2_DSS_SDI is not set +# CONFIG_OMAP2_DSS_DSI is not set +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 +CONFIG_FB_OMAP2=y +CONFIG_FB_OMAP2_DEBUG_SUPPORT=y +# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set +CONFIG_FB_OMAP2_NUM_FBS=3 + +# +# OMAP2/3 Display Device Drivers +# +CONFIG_PANEL_GENERIC=y +# CONFIG_PANEL_SHARP_LS037V7DW01 is not set +CONFIG_PANEL_SHARP_LQ043T1DG01=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig index 3b3a3775bbf4..6d8a0c891f80 100644 --- a/arch/arm/configs/ams_delta_defconfig +++ b/arch/arm/configs/ams_delta_defconfig @@ -47,6 +47,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set +CONFIG_TREE_PREEMPT_RCU=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y @@ -95,9 +96,8 @@ CONFIG_KMOD=y # Block layer # CONFIG_BLOCK=y -# CONFIG_LBD is not set +# CONFIG_LBDAF is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # # IO Schedulers @@ -699,6 +699,7 @@ CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +CONFIG_SERIO_AMS_DELTA=y # CONFIG_GAMEPORT is not set # @@ -835,7 +836,8 @@ CONFIG_DAB=y # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y # # Display device support @@ -1283,7 +1285,7 @@ CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set diff --git a/arch/arm/configs/devkit8000_defconfig b/arch/arm/configs/devkit8000_defconfig index 61a817e8cf81..c7a68202fa3f 100644 --- a/arch/arm/configs/devkit8000_defconfig +++ b/arch/arm/configs/devkit8000_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc6 -# Thu Feb 4 15:42:56 2010 +# Linux kernel version: 2.6.34-rc2 +# Wed Mar 24 13:27:25 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_HAVE_PROC_CPU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -19,7 +20,9 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_ARM_L1_CACHE_SHIFT_6=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -60,11 +63,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -96,10 +94,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y @@ -170,7 +172,7 @@ CONFIG_INLINE_WRITE_UNLOCK=y CONFIG_INLINE_WRITE_UNLOCK_IRQ=y # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set -# CONFIG_FREEZER is not set +CONFIG_FREEZER=y # # System Type @@ -181,6 +183,7 @@ CONFIG_MMU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set @@ -190,7 +193,6 @@ CONFIG_MMU=y # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -207,21 +209,26 @@ CONFIG_MMU=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set # CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set CONFIG_ARCH_OMAP=y -# CONFIG_ARCH_BCMRING is not set -# CONFIG_ARCH_U8500 is not set # # TI OMAP Implementations @@ -237,16 +244,20 @@ CONFIG_ARCH_OMAP3=y # OMAP Feature Selections # # CONFIG_OMAP_RESET_CLOCKS is not set -# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y CONFIG_OMAP_MCBSP=y # CONFIG_OMAP_MBOX_FWK is not set # CONFIG_OMAP_MPU_TIMER is not set CONFIG_OMAP_32K_TIMER=y +# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set CONFIG_OMAP_32K_TIMER_HZ=128 CONFIG_OMAP_DM_TIMER=y # CONFIG_OMAP_PM_NONE is not set CONFIG_OMAP_PM_NOOP=y CONFIG_ARCH_OMAP3430=y +CONFIG_OMAP_PACKAGE_CUS=y # # OMAP Board Type @@ -295,6 +306,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set @@ -387,7 +399,14 @@ CONFIG_HAVE_AOUT=y # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_PM_OPS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -395,7 +414,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -666,6 +684,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -717,6 +736,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set +# CONFIG_TI_DAVINCI_EMAC is not set CONFIG_DM9000=y CONFIG_DM9000_DEBUGLEVEL=4 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y @@ -863,6 +883,7 @@ CONFIG_SERIAL_8250_RSA=y # CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -891,6 +912,7 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_OCORES is not set CONFIG_I2C_OMAP=y # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -904,15 +926,9 @@ CONFIG_I2C_OMAP=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -944,10 +960,12 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set @@ -984,10 +1002,12 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # CONFIG_MFD_CORE=y +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set CONFIG_TWL4030_CORE=y CONFIG_TWL4030_POWER=y @@ -998,22 +1018,25 @@ CONFIG_TWL4030_CODEC=y # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_AB4500_CORE is not set CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_DUMMY is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set # CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_MAX8649 is not set # CONFIG_REGULATOR_MAX8660 is not set CONFIG_REGULATOR_TWL4030=y # CONFIG_REGULATOR_LP3971 is not set @@ -1072,7 +1095,6 @@ CONFIG_OMAP2_DSS_VENC=y CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 CONFIG_FB_OMAP2=y CONFIG_FB_OMAP2_DEBUG_SUPPORT=y -# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set CONFIG_FB_OMAP2_NUM_FBS=3 # @@ -1080,7 +1102,9 @@ CONFIG_FB_OMAP2_NUM_FBS=3 # CONFIG_PANEL_GENERIC=y # CONFIG_PANEL_SHARP_LS037V7DW01 is not set -CONFIG_PANEL_INNOLUX_AT070TN83=y +# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set +# CONFIG_PANEL_TOPPOLY_TDO35S is not set +# CONFIG_PANEL_TPO_TD043MTEA1 is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1136,6 +1160,7 @@ CONFIG_SND_ARM=y CONFIG_SND_SPI=y CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_UA101 is not set # CONFIG_SND_USB_CAIAQ is not set CONFIG_SND_SOC=y CONFIG_SND_OMAP_SOC=y @@ -1147,42 +1172,44 @@ CONFIG_SND_SOC_TWL4030=y # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -CONFIG_HIDRAW=y +# CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=y # CONFIG_HID_PID is not set -CONFIG_USB_HIDDEV=y +# CONFIG_USB_HIDDEV is not set # # Special HID drivers # -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y +# CONFIG_HID_3M_PCT is not set +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set # CONFIG_HID_DRAGONRISE is not set -CONFIG_HID_EZKEY=y +# CONFIG_HID_EZKEY is not set # CONFIG_HID_KYE is not set -CONFIG_HID_GYRATION=y +# CONFIG_HID_GYRATION is not set # CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set -CONFIG_HID_LOGITECH=y -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MOSART is not set +# CONFIG_HID_MONTEREY is not set # CONFIG_HID_NTRIG is not set -CONFIG_HID_PANTHERLORD=y -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y +# CONFIG_HID_ORTEK is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_QUANTA is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_STANTUM is not set +# CONFIG_HID_SUNPLUS is not set # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set @@ -1193,7 +1220,7 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y -# CONFIG_USB_DEBUG is not set +CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # @@ -1202,7 +1229,7 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # CONFIG_USB_DEVICEFS is not set # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set +CONFIG_USB_OTG=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y @@ -1230,15 +1257,15 @@ CONFIG_USB_MUSB_SOC=y # # OMAP 343x high speed USB support # -CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_HOST is not set # CONFIG_USB_MUSB_PERIPHERAL is not set -# CONFIG_USB_MUSB_OTG is not set -# CONFIG_USB_GADGET_MUSB_HDRC is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y CONFIG_USB_MUSB_HDRC_HCD=y # CONFIG_MUSB_PIO_ONLY is not set CONFIG_USB_INVENTRA_DMA=y # CONFIG_USB_TI_CPPI_DMA is not set -# CONFIG_USB_MUSB_DEBUG is not set +CONFIG_USB_MUSB_DEBUG=y # # USB Device Class drivers @@ -1291,7 +1318,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1304,9 +1330,8 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG is not set +CONFIG_USB_GADGET_DEBUG=y # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y @@ -1314,8 +1339,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_LH7A40X is not set -CONFIG_USB_GADGET_OMAP=y -CONFIG_USB_OMAP=y +# CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_R8A66597 is not set # CONFIG_USB_GADGET_PXA27X is not set @@ -1330,19 +1354,20 @@ CONFIG_USB_OMAP=y # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LANGWELL is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set -CONFIG_USB_AUDIO=m -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_ETH_EEM=y -CONFIG_USB_GADGETFS=m +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=y +# CONFIG_USB_ETH_RNDIS is not set +# CONFIG_USB_ETH_EEM is not set +# CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_MASS_STORAGE is not set -CONFIG_USB_G_SERIAL=m +# CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set -CONFIG_USB_G_PRINTER=m +# CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_NOKIA is not set # CONFIG_USB_G_MULTI is not set # @@ -1373,8 +1398,6 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=m # CONFIG_MMC_OMAP is not set CONFIG_MMC_OMAP_HS=y -# CONFIG_MMC_AT91 is not set -# CONFIG_MMC_ATMELMCI is not set CONFIG_MMC_SPI=m # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y @@ -1392,11 +1415,11 @@ CONFIG_LEDS_GPIO_PLATFORM=y # CONFIG_LEDS_REGULATOR is not set # CONFIG_LEDS_BD2802 is not set # CONFIG_LEDS_LT3593 is not set +CONFIG_LEDS_TRIGGERS=y # # LED Triggers # -CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set @@ -1580,6 +1603,7 @@ CONFIG_UBIFS_FS=y CONFIG_UBIFS_FS_LZO=y CONFIG_UBIFS_FS_ZLIB=y # CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1606,6 +1630,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig index c88e9527a8ec..a708fd6d6ffe 100644 --- a/arch/arm/configs/mx51_defconfig +++ b/arch/arm/configs/mx51_defconfig @@ -809,7 +809,22 @@ CONFIG_SSB_POSSIBLE=y CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_MXC=y + + CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig index d6ad92177324..94dfcf0aa674 100644 --- a/arch/arm/configs/omap3_defconfig +++ b/arch/arm/configs/omap3_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc5 -# Tue Jan 26 11:05:31 2010 +# Linux kernel version: 2.6.34-rc7 +# Thu May 13 10:54:43 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_HAVE_PROC_CPU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -19,7 +20,9 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_ARM_L1_CACHE_SHIFT_6=y CONFIG_OPROFILE_ARMV6=y CONFIG_OPROFILE_ARM11_CORE=y CONFIG_OPROFILE_ARMV7=y @@ -63,12 +66,7 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set +CONFIG_LOG_BUF_SHIFT=16 # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -100,17 +98,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # +CONFIG_PERF_EVENTS=y +# CONFIG_PERF_COUNTERS is not set +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y -CONFIG_TRACEPOINTS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y @@ -189,6 +191,7 @@ CONFIG_MMU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set @@ -198,7 +201,6 @@ CONFIG_MMU=y # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -215,21 +217,26 @@ CONFIG_MMU=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set # CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set CONFIG_ARCH_OMAP=y -# CONFIG_ARCH_BCMRING is not set -# CONFIG_ARCH_U8500 is not set # # TI OMAP Implementations @@ -254,6 +261,7 @@ CONFIG_OMAP_MCBSP=y # CONFIG_OMAP_MBOX_FWK is not set # CONFIG_OMAP_MPU_TIMER is not set CONFIG_OMAP_32K_TIMER=y +# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set CONFIG_OMAP_32K_TIMER_HZ=128 CONFIG_OMAP_DM_TIMER=y # CONFIG_OMAP_PM_NONE is not set @@ -264,7 +272,7 @@ CONFIG_MACH_OMAP_GENERIC=y # OMAP Core Type # CONFIG_ARCH_OMAP2420=y -# CONFIG_ARCH_OMAP2430 is not set +CONFIG_ARCH_OMAP2430=y CONFIG_ARCH_OMAP3430=y CONFIG_OMAP_PACKAGE_CBB=y CONFIG_OMAP_PACKAGE_CUS=y @@ -276,8 +284,9 @@ CONFIG_OMAP_PACKAGE_CBP=y CONFIG_MACH_OMAP2_TUSB6010=y CONFIG_MACH_OMAP_H4=y CONFIG_MACH_OMAP_APOLLON=y -# CONFIG_MACH_OMAP_2430SDP is not set +CONFIG_MACH_OMAP_2430SDP=y CONFIG_MACH_OMAP3_BEAGLE=y +CONFIG_MACH_DEVKIT8000=y CONFIG_MACH_OMAP_LDP=y CONFIG_MACH_OVERO=y CONFIG_MACH_OMAP3EVM=y @@ -294,6 +303,7 @@ CONFIG_MACH_OMAP_ZOOM2=y CONFIG_MACH_OMAP_ZOOM3=y CONFIG_MACH_CM_T35=y CONFIG_MACH_IGEP0020=y +CONFIG_MACH_SBC3530=y CONFIG_MACH_OMAP_3630SDP=y CONFIG_MACH_OMAP_4430SDP=y # CONFIG_OMAP3_EMU is not set @@ -330,11 +340,16 @@ CONFIG_ARM_THUMBEE=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y +CONFIG_OUTER_CACHE=y +CONFIG_OUTER_CACHE_SYNC=y +CONFIG_CACHE_L2X0=y CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_411920 is not set # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set +# CONFIG_PL310_ERRATA_588369 is not set CONFIG_ARM_GIC=y CONFIG_COMMON_CLKDEV=y @@ -368,6 +383,7 @@ CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set +CONFIG_HW_PERF_EVENTS=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -390,7 +406,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyS2,115200" # CONFIG_XIP_KERNEL is not set CONFIG_KEXEC=y CONFIG_ATAGS_PROC=y @@ -443,7 +459,8 @@ CONFIG_BINFMT_MISC=y # CONFIG_PM=y CONFIG_PM_DEBUG=y -CONFIG_PM_VERBOSE=y +# CONFIG_PM_ADVANCED_DEBUG is not set +# CONFIG_PM_VERBOSE is not set CONFIG_CAN_PM_TRACE=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y @@ -451,6 +468,7 @@ CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set CONFIG_PM_RUNTIME=y +CONFIG_PM_OPS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -458,7 +476,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y @@ -544,7 +561,6 @@ CONFIG_NETFILTER_ADVANCED=y # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set -# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set @@ -584,7 +600,7 @@ CONFIG_CFG80211=y # CONFIG_CFG80211_REG_DEBUG is not set CONFIG_CFG80211_DEFAULT_PS=y # CONFIG_CFG80211_DEBUGFS is not set -CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_CFG80211_INTERNAL_REGDB is not set CONFIG_CFG80211_WEXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=y @@ -676,7 +692,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_OMAP_NOR=y # CONFIG_MTD_PLATRAM is not set # @@ -754,6 +769,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set @@ -773,6 +789,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -839,12 +856,14 @@ CONFIG_SMSC_PHY=y # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MICREL_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set CONFIG_SMC91X=y +# CONFIG_TI_DAVINCI_EMAC is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set # CONFIG_ETHOC is not set @@ -881,6 +900,7 @@ CONFIG_LIBERTAS_USB=y CONFIG_LIBERTAS_SDIO=y # CONFIG_LIBERTAS_SPI is not set CONFIG_LIBERTAS_DEBUG=y +# CONFIG_LIBERTAS_MESH is not set # CONFIG_P54_COMMON is not set # CONFIG_RT2X00 is not set # CONFIG_WL12XX is not set @@ -902,6 +922,7 @@ CONFIG_USB_NET_AX8817X=y CONFIG_USB_NET_CDCETHER=y # CONFIG_USB_NET_CDC_EEM is not set # CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_SMSC75XX is not set # CONFIG_USB_NET_SMSC95XX is not set # CONFIG_USB_NET_GL620A is not set CONFIG_USB_NET_NET1080=y @@ -917,6 +938,8 @@ CONFIG_USB_EPSON2888=y CONFIG_USB_KC2190=y CONFIG_USB_NET_ZAURUS=y # CONFIG_USB_NET_INT51X1 is not set +# CONFIG_USB_IPHETH is not set +# CONFIG_USB_SIERRA_NET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -1012,6 +1035,7 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set CONFIG_INPUT_TWL4030_PWRBUTTON=y +# CONFIG_INPUT_TWL4030_VIBRA is not set # CONFIG_INPUT_UINPUT is not set # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set @@ -1055,6 +1079,7 @@ CONFIG_SERIAL_8250_RSA=y # CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -1083,6 +1108,7 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_OCORES is not set CONFIG_I2C_OMAP=y # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1096,15 +1122,9 @@ CONFIG_I2C_OMAP=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -1136,10 +1156,12 @@ CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set @@ -1204,10 +1226,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -1262,7 +1285,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y +# CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers @@ -1270,6 +1293,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y # CONFIG_SOFT_WATCHDOG is not set CONFIG_OMAP_WATCHDOG=y CONFIG_TWL4030_WATCHDOG=y +# CONFIG_MAX63XX_WATCHDOG is not set # # USB-based Watchdog Cards @@ -1286,14 +1310,16 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # CONFIG_MFD_CORE=y +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set -# CONFIG_MENELAUS is not set +CONFIG_MENELAUS=y CONFIG_TWL4030_CORE=y -# CONFIG_TWL4030_POWER is not set +CONFIG_TWL4030_POWER=y CONFIG_TWL4030_CODEC=y # CONFIG_MFD_TMIO is not set # CONFIG_MFD_T7L66XB is not set @@ -1301,27 +1327,30 @@ CONFIG_TWL4030_CODEC=y # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_AB4500_CORE is not set CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_REGULATOR_DUMMY is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set # CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_MAX8649 is not set # CONFIG_REGULATOR_MAX8660 is not set CONFIG_REGULATOR_TWL4030=y # CONFIG_REGULATOR_LP3971 is not set -# CONFIG_REGULATOR_TPS65023 is not set -# CONFIG_REGULATOR_TPS6507X is not set +CONFIG_REGULATOR_TPS65023=y +CONFIG_REGULATOR_TPS6507X=y # CONFIG_MEDIA_SUPPORT is not set # @@ -1333,9 +1362,9 @@ CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set # CONFIG_FB_BOOT_VESA_SUPPORT is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set @@ -1358,19 +1387,12 @@ CONFIG_FB_TILEBLITTING=y # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set -CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP is not set CONFIG_FB_OMAP_LCD_VGA=y -# CONFIG_FB_OMAP_031M3R is not set -# CONFIG_FB_OMAP_048M3R is not set -CONFIG_FB_OMAP_079M3R=y -# CONFIG_FB_OMAP_092M9R is not set -# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set -# CONFIG_FB_OMAP_LCD_MIPID is not set -# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set -CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 # CONFIG_OMAP2_DSS is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_L4F00242T03 is not set # CONFIG_LCD_LMS283GF05 is not set # CONFIG_LCD_LTV350QV is not set # CONFIG_LCD_ILI9320 is not set @@ -1448,6 +1470,7 @@ CONFIG_SND_ARM=y CONFIG_SND_SPI=y CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=y +# CONFIG_SND_USB_UA101 is not set # CONFIG_SND_USB_CAIAQ is not set CONFIG_SND_SOC=y CONFIG_SND_OMAP_SOC=y @@ -1479,6 +1502,7 @@ CONFIG_USB_HID=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set # CONFIG_HID_A4TECH is not set # CONFIG_HID_APPLE is not set # CONFIG_HID_BELKIN is not set @@ -1492,13 +1516,18 @@ CONFIG_USB_HID=y # CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MAGICMOUSE is not set # CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MOSART is not set # CONFIG_HID_MONTEREY is not set # CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set +# CONFIG_HID_QUANTA is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set +# CONFIG_HID_STANTUM is not set # CONFIG_HID_SUNPLUS is not set # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set @@ -1545,6 +1574,10 @@ CONFIG_USB_MUSB_HDRC=y CONFIG_USB_MUSB_SOC=y # +# OMAP 243x high speed USB support +# + +# # OMAP 343x high speed USB support # # CONFIG_USB_MUSB_HOST is not set @@ -1608,7 +1641,6 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1621,7 +1653,6 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_IOWARRIOR is not set CONFIG_USB_TEST=y # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG=y CONFIG_USB_GADGET_DEBUG_FILES=y @@ -1659,6 +1690,7 @@ CONFIG_USB_ZERO=m # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_NOKIA is not set # CONFIG_USB_G_MULTI is not set # @@ -1686,10 +1718,8 @@ CONFIG_SDIO_UART=y # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set -# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y -# CONFIG_MMC_AT91 is not set -# CONFIG_MMC_ATMELMCI is not set # CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y @@ -1707,11 +1737,11 @@ CONFIG_LEDS_GPIO_PLATFORM=y # CONFIG_LEDS_REGULATOR is not set # CONFIG_LEDS_BD2802 is not set # CONFIG_LEDS_LT3593 is not set +CONFIG_LEDS_TRIGGERS=y # # LED Triggers # -CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set @@ -1751,6 +1781,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set +CONFIG_RTC_DRV_TWL92330=y CONFIG_RTC_DRV_TWL4030=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set @@ -1799,6 +1830,11 @@ CONFIG_RTC_DRV_TWL4030=y # CONFIG_STAGING is not set # +# CBUS support +# +# CONFIG_CBUS is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -1826,6 +1862,7 @@ CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y # CONFIG_QUOTA_NETLINK_INTERFACE is not set CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QUOTA_DEBUG is not set CONFIG_QUOTA_TREE=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y @@ -1897,6 +1934,7 @@ CONFIG_UBIFS_FS=y CONFIG_UBIFS_FS_LZO=y CONFIG_UBIFS_FS_ZLIB=y # CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1924,6 +1962,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -2024,6 +2063,7 @@ CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y +# CONFIG_PROVE_RCU is not set CONFIG_LOCKDEP=y CONFIG_LOCK_STAT=y # CONFIG_DEBUG_LOCKDEP is not set @@ -2053,13 +2093,9 @@ CONFIG_DEBUG_INFO=y # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set -CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y -CONFIG_EVENT_TRACING=y -CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_RING_BUFFER_ALLOW_SWAP=y -CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set @@ -2199,7 +2235,7 @@ CONFIG_CRYPTO_LZO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y -CONFIG_BINARY_PRINTF=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -2222,3 +2258,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig index a6dd6d1af806..b02e371b0997 100644 --- a/arch/arm/configs/omap3_evm_defconfig +++ b/arch/arm/configs/omap3_evm_defconfig @@ -911,7 +911,56 @@ CONFIG_DAB=y # # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_OMAP2_VRAM=y +CONFIG_OMAP2_VRFB=y +CONFIG_OMAP2_DSS=y +CONFIG_OMAP2_VRAM_SIZE=4 +# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set +# CONFIG_OMAP2_DSS_RFBI is not set +CONFIG_OMAP2_DSS_VENC=y +# CONFIG_OMAP2_DSS_SDI is not set +# CONFIG_OMAP2_DSS_DSI is not set +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 +CONFIG_FB_OMAP2=y +# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set +# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set +CONFIG_FB_OMAP2_NUM_FBS=3 + +# +# OMAP2/3 Display Device Drivers +# +CONFIG_PANEL_GENERIC=y +# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set +CONFIG_PANEL_SHARP_LS037V7DW01=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # diff --git a/arch/arm/configs/omap3_stalker_lks_defconfig b/arch/arm/configs/omap3_stalker_lks_defconfig new file mode 100644 index 000000000000..83365f075cea --- /dev/null +++ b/arch/arm/configs/omap3_stalker_lks_defconfig @@ -0,0 +1,1691 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.34-rc7 +# Mon May 17 16:57:28 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_ARM_L1_CACHE_SHIFT_6=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +CONFIG_ARCH_OMAP2PLUS=y +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y +# CONFIG_ARCH_OMAP4 is not set + +# +# OMAP Feature Selections +# +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_MCBSP is not set +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y +CONFIG_ARCH_OMAP3430=y +CONFIG_OMAP_PACKAGE_CUS=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_DEVKIT8000 is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3517EVM is not set +# CONFIG_MACH_OMAP3_PANDORA is not set +# CONFIG_MACH_OMAP3_TOUCHBOOK is not set +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_NOKIA_RX51 is not set +# CONFIG_MACH_OMAP_ZOOM2 is not set +# CONFIG_MACH_OMAP_ZOOM3 is not set +# CONFIG_MACH_CM_T35 is not set +# CONFIG_MACH_IGEP0020 is not set +CONFIG_MACH_SBC3530=y +# CONFIG_MACH_OMAP_3630SDP is not set +# CONFIG_OMAP3_EMU is not set +# CONFIG_OMAP3_SDRC_AC_TIMING is not set + +# +# Processor Type +# +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_CPU_HAS_PMU=y +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_ADVANCED_DEBUG is not set +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_PM_OPS=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +# CONFIG_MTD_NAND_OMAP2 is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +# CONFIG_MTD_ONENAND_GENERIC is not set +CONFIG_MTD_ONENAND_OMAP2=y +# CONFIG_MTD_ONENAND_OTP is not set +# CONFIG_MTD_ONENAND_2X_PROGRAM is not set +# CONFIG_MTD_ONENAND_SIM is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MICREL_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_TI_DAVINCI_EMAC is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_WLAN=y +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_IPHETH is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +CONFIG_KEYBOARD_TWL4030=y +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_IT8761E is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX7300 is not set +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y +# CONFIG_GPIO_ADP5588 is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y +# CONFIG_TWL4030_WATCHDOG is not set +# CONFIG_MAX63XX_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_TWL4030_POWER is not set +# CONFIG_TWL4030_CODEC is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_DUMMY is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_MAX8649 is not set +# CONFIG_REGULATOR_MAX8660 is not set +CONFIG_REGULATOR_TWL4030=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_OMAP2_DSS is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_3M_PCT is not set +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MOSART is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_QUANTA is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_STANTUM is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=y +# CONFIG_USB_ISIGHTFW is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +# CONFIG_USB_ZERO_HNPTEST is not set +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_MASS_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_NOKIA is not set +# CONFIG_USB_G_MULTI is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_USB_ULPI is not set +CONFIG_TWL4030_USB=y +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QUOTA_DEBUG is not set +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_LOGFS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_EARLY_PRINTK is not set +# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_OC_ETM is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig index a96bca290cd1..1fb04567f6e1 100644 --- a/arch/arm/configs/omap_4430sdp_defconfig +++ b/arch/arm/configs/omap_4430sdp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32 -# Sun Dec 6 23:37:45 2009 +# Linux kernel version: 2.6.34-rc7 +# Wed May 12 12:26:05 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -9,6 +9,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_HAVE_PROC_CPU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -20,6 +21,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -33,28 +35,33 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set # # RCU Subsystem # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set @@ -64,6 +71,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -85,10 +93,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -127,14 +139,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +CONFIG_MUTEX_SPIN_ON_OWNER=y # CONFIG_FREEZER is not set # @@ -146,6 +185,7 @@ CONFIG_MMU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set @@ -155,7 +195,6 @@ CONFIG_MMU=y # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -163,6 +202,7 @@ CONFIG_MMU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set # CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set @@ -171,25 +211,32 @@ CONFIG_MMU=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set # CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set CONFIG_ARCH_OMAP=y -# CONFIG_ARCH_BCMRING is not set # # TI OMAP Implementations # # CONFIG_ARCH_OMAP1 is not set +CONFIG_ARCH_OMAP2PLUS=y # CONFIG_ARCH_OMAP2 is not set # CONFIG_ARCH_OMAP3 is not set CONFIG_ARCH_OMAP4=y @@ -205,10 +252,6 @@ CONFIG_OMAP_MCBSP=y CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 CONFIG_OMAP_DM_TIMER=y -# CONFIG_OMAP_LL_DEBUG_UART1 is not set -# CONFIG_OMAP_LL_DEBUG_UART2 is not set -CONFIG_OMAP_LL_DEBUG_UART3=y -# CONFIG_OMAP_LL_DEBUG_NONE is not set # CONFIG_OMAP_PM_NONE is not set CONFIG_OMAP_PM_NOOP=y @@ -243,13 +286,16 @@ CONFIG_CPU_CP15_MMU=y # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y CONFIG_OUTER_CACHE=y +CONFIG_OUTER_CACHE_SYNC=y CONFIG_CACHE_L2X0=y CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set CONFIG_PL310_ERRATA_588369=y CONFIG_ARM_GIC=y +CONFIG_COMMON_CLKDEV=y # # Bus support @@ -280,6 +326,7 @@ CONFIG_HZ=128 # CONFIG_THUMB2_KERNEL is not set CONFIG_AEABI=y CONFIG_OABI_COMPAT=y +CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -294,8 +341,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # CONFIG_LEDS is not set @@ -343,7 +388,83 @@ CONFIG_BINFMT_MISC=y # # CONFIG_PM is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_NET is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_UNIX is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -360,17 +481,24 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# +# CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # CONFIG_MG_DISK is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y @@ -379,12 +507,56 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +CONFIG_KS8851=y +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set # CONFIG_PHONE is not set # @@ -393,6 +565,7 @@ CONFIG_HAVE_IDE=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -445,8 +618,10 @@ CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -456,8 +631,58 @@ CONFIG_HW_RANDOM=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set # # PPS support @@ -471,10 +696,17 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_TWL4030 is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -483,6 +715,9 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set # # AC97 GPIO expanders: @@ -492,7 +727,15 @@ CONFIG_GPIOLIB=y # CONFIG_HWMON is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set CONFIG_OMAP_WATCHDOG=y +# CONFIG_TWL4030_WATCHDOG is not set +# CONFIG_MAX63XX_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y # @@ -504,15 +747,46 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_TWL4030_POWER is not set +# CONFIG_TWL4030_CODEC is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set -# CONFIG_REGULATOR is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_DUMMY is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_MAX8649 is not set +# CONFIG_REGULATOR_MAX8660 is not set +CONFIG_REGULATOR_TWL4030=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set # CONFIG_MEDIA_SUPPORT is not set # @@ -536,12 +810,94 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP_HS=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +CONFIG_RTC_DRV_TWL4030=y +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set @@ -564,9 +920,10 @@ CONFIG_EXT3_FS=y CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y @@ -575,7 +932,9 @@ CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QUOTA_DEBUG is not set CONFIG_QUOTA_TREE=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y @@ -624,6 +983,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -634,6 +994,28 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types @@ -696,6 +1078,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set # # Kernel hacking @@ -750,13 +1133,11 @@ CONFIG_FRAME_POINTER=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set -# CONFIG_BRANCH_PROFILE_NONE is not set -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -765,6 +1146,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_ERRORS is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_LL is not set +# CONFIG_OC_ETM is not set # # Security options @@ -772,7 +1154,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # @@ -791,6 +1177,7 @@ CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -889,3 +1276,4 @@ CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig index 473f9e13f08b..56d4928cd4c9 100644 --- a/arch/arm/configs/rx51_defconfig +++ b/arch/arm/configs/rx51_defconfig @@ -784,6 +784,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_GPIO=m +CONFIG_KEYBOARD_TWL4030=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -809,6 +810,7 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_TWL4030_PWRBUTTON=y CONFIG_INPUT_UINPUT=m # @@ -1110,7 +1112,40 @@ CONFIG_RADIO_ADAPTERS=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y + +# Frame buffer hardware drivers +# +CONFIG_OMAP2_VRAM=y +CONFIG_OMAP2_VRFB=y +CONFIG_OMAP2_DSS=y +CONFIG_OMAP2_VRAM_SIZE=0 +# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set +# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set +# CONFIG_OMAP2_DSS_DPI is not set +# CONFIG_OMAP2_DSS_RFBI is not set +# CONFIG_OMAP2_DSS_VENC is not set +CONFIG_OMAP2_DSS_SDI=y +# CONFIG_OMAP2_DSS_DSI is not set +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 +CONFIG_FB_OMAP2=y +CONFIG_FB_OMAP2_DEBUG_SUPPORT=y +CONFIG_FB_OMAP2_NUM_FBS=3 + +# +# OMAP2/3 Display Device Drivers +# +# CONFIG_PANEL_GENERIC is not set +# CONFIG_PANEL_SHARP_LS037V7DW01 is not set +# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set +# CONFIG_PANEL_TOPPOLY_TDO35S is not set +# CONFIG_PANEL_TPO_TD043MTEA1 is not set +CONFIG_PANEL_ACX565AKM=y + # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1127,6 +1162,8 @@ CONFIG_DISPLAY_SUPPORT=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y CONFIG_SOUND=y # CONFIG_SOUND_OSS_CORE is not set CONFIG_SND=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 8e94c3caeb8c..9236475e7131 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 +# Linux kernel version: 2.6.34 +# Sat May 22 03:17:31 2010 # CONFIG_ARM=y CONFIG_HAVE_PWM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_TIME is not set -# CONFIG_GENERIC_CLOCKEVENTS is not set -CONFIG_MMU=y +CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y @@ -18,13 +17,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -34,6 +34,12 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y @@ -45,15 +51,16 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=m CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -69,6 +76,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -78,7 +86,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -91,19 +98,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_CLK=y -# CONFIG_SLOW_WORK is not set + +# +# GCOV-based kernel profiling +# +CONFIG_SLOW_WORK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -115,7 +133,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -123,32 +141,62 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -156,42 +204,36 @@ CONFIG_FREEZER=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set # CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set CONFIG_ARCH_S3C2410=y # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set -CONFIG_PLAT_S3C24XX=y -CONFIG_S3C2410_CLOCK=y -CONFIG_S3C24XX_DCLK=y -CONFIG_CPU_S3C244X=y -CONFIG_S3C24XX_PWM=y -CONFIG_S3C24XX_GPIO_EXTRA=128 -CONFIG_S3C24XX_GPIO_EXTRA64=y -CONFIG_S3C24XX_GPIO_EXTRA128=y -CONFIG_PM_SIMTEC=y -CONFIG_S3C2410_DMA=y -# CONFIG_S3C2410_DMA_DEBUG is not set -CONFIG_S3C_ADC=y -CONFIG_MACH_SMDK=y -CONFIG_PLAT_S3C=y -CONFIG_CPU_LLSERIAL_S3C2410=y -CONFIG_CPU_LLSERIAL_S3C2440=y +CONFIG_PLAT_SAMSUNG=y # # Boot options @@ -199,15 +241,35 @@ CONFIG_CPU_LLSERIAL_S3C2440=y # CONFIG_S3C_BOOT_WATCHDOG is not set CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_S3C_BOOT_UART_FORCE_FIFO=y +CONFIG_S3C_LOWLEVEL_UART_PORT=0 +CONFIG_SAMSUNG_CLKSRC=y +CONFIG_SAMSUNG_GPIO_EXTRA=0 +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_ADC=y +CONFIG_S3C_DEV_HSMMC=y +CONFIG_S3C_DEV_USB_HOST=y +CONFIG_S3C_DEV_NAND=y +CONFIG_S3C_DMA=y # # Power management # # CONFIG_SAMSUNG_PM_DEBUG is not set # CONFIG_SAMSUNG_PM_CHECK is not set -CONFIG_S3C_LOWLEVEL_UART_PORT=0 -CONFIG_S3C_GPIO_SPACE=0 -CONFIG_S3C_DEV_HSMMC=y +CONFIG_PLAT_S3C24XX=y +CONFIG_CPU_LLSERIAL_S3C2410=y +CONFIG_CPU_LLSERIAL_S3C2440=y +CONFIG_S3C2410_CLOCK=y +CONFIG_S3C24XX_DCLK=y +CONFIG_S3C24XX_PWM=y +CONFIG_S3C24XX_GPIO_EXTRA=128 +CONFIG_S3C24XX_GPIO_EXTRA64=y +CONFIG_S3C24XX_GPIO_EXTRA128=y +CONFIG_PM_SIMTEC=y +CONFIG_S3C2410_DMA=y +# CONFIG_S3C2410_DMA_DEBUG is not set +CONFIG_MACH_SMDK=y +CONFIG_S3C24XX_SIMTEC_AUDIO=y # # S3C2400 Machines @@ -224,6 +286,7 @@ CONFIG_MACH_BAST_IDE=y # CONFIG_ARCH_SMDK2410=y CONFIG_ARCH_H1940=y +# CONFIG_H1940BT is not set CONFIG_PM_H1940=y CONFIG_MACH_N30=y CONFIG_ARCH_BAST=y @@ -247,25 +310,26 @@ CONFIG_MACH_S3C2413=y CONFIG_MACH_SMDK2412=y CONFIG_MACH_VSTMS=y CONFIG_CPU_S3C2440=y +CONFIG_CPU_S3C2442=y +CONFIG_CPU_S3C244X=y +CONFIG_S3C2440_XTAL_12000000=y +CONFIG_S3C2440_XTAL_16934400=y CONFIG_S3C2440_DMA=y # -# S3C2440 Machines +# S3C2440 and S3C2442 Machines # CONFIG_MACH_ANUBIS=y +# CONFIG_MACH_NEO1973_GTA02 is not set CONFIG_MACH_OSIRIS=y +# CONFIG_MACH_OSIRIS_DVS is not set CONFIG_MACH_RX3715=y CONFIG_ARCH_S3C2440=y CONFIG_MACH_NEXCODER_2440=y CONFIG_SMDK2440_CPU2440=y +CONFIG_SMDK2440_CPU2442=y CONFIG_MACH_AT2440EVB=y -CONFIG_CPU_S3C2442=y CONFIG_MACH_MINI2440=y - -# -# S3C2442 Machines -# -CONFIG_SMDK2440_CPU2442=y CONFIG_CPU_S3C2443=y CONFIG_S3C2443_DMA=y @@ -283,7 +347,7 @@ CONFIG_CPU_32v4T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV4T=y CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_V4WT=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y @@ -299,7 +363,7 @@ CONFIG_CPU_CP15_MMU=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 # # Bus support @@ -316,10 +380,11 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_HZ=200 # CONFIG_AEABI is not set -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -330,14 +395,14 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_SPLIT_PTLOCK_CPUS=999999 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options @@ -351,6 +416,7 @@ CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0" # # CPU Power Management # +# CONFIG_CPU_FREQ is not set # CONFIG_CPU_IDLE is not set # @@ -384,6 +450,8 @@ CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_APM_EMULATION=m +# CONFIG_PM_RUNTIME is not set +CONFIG_PM_OPS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -391,7 +459,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m @@ -463,6 +530,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -500,6 +568,7 @@ CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +# CONFIG_NETFILTER_XT_TARGET_CT is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_LED=m @@ -544,6 +613,7 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +# CONFIG_NETFILTER_XT_MATCH_OSF is not set CONFIG_IP_VS=m # CONFIG_IP_VS_IPV6 is not set # CONFIG_IP_VS_DEBUG is not set @@ -556,6 +626,7 @@ CONFIG_IP_VS_TAB_BITS=12 # CONFIG_IP_VS_PROTO_UDP is not set # CONFIG_IP_VS_PROTO_ESP is not set # CONFIG_IP_VS_PROTO_AH is not set +# CONFIG_IP_VS_PROTO_SCTP is not set # # IPVS scheduler @@ -639,6 +710,7 @@ CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -653,6 +725,7 @@ CONFIG_IP6_NF_RAW=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y # CONFIG_DCB is not set @@ -687,19 +760,21 @@ CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIVHCI=m +# CONFIG_BT_MRVL is not set # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_REG_DEBUG is not set -# CONFIG_WIRELESS_OLD_REGULATORY is not set -CONFIG_WIRELESS_EXT=y +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_INTERNAL_REGDB is not set +CONFIG_CFG80211_WEXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set CONFIG_MAC80211=m - -# -# Rate control algorithm selection -# CONFIG_MAC80211_RC_MINSTREL=y # CONFIG_MAC80211_RC_DEFAULT_PID is not set CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y @@ -719,6 +794,7 @@ CONFIG_MAC80211_LEDS=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -730,9 +806,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y @@ -793,6 +869,7 @@ CONFIG_MTD_ROM=y # # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -843,6 +920,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_UB=m CONFIG_BLK_DEV_RAM=y @@ -851,19 +932,26 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_MG_DISK is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # # EEPROM support # -CONFIG_EEPROM_AT24=m +CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=m CONFIG_EEPROM_LEGACY=m +# CONFIG_EEPROM_MAX6875 is not set CONFIG_EEPROM_93CX6=m +# CONFIG_IWMC3200TOP is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -890,6 +978,7 @@ CONFIG_BLK_DEV_PLATFORM=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -907,10 +996,6 @@ CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set @@ -951,7 +1036,6 @@ CONFIG_SCSI_LOWLEVEL=y CONFIG_HAVE_PATA_PLATFORM=y # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -989,16 +1073,30 @@ CONFIG_DM9000_DEBUGLEVEL=4 # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_CS89x0 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NET_POCKET is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN=y +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_AT76C50X_USB is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_ATH_COMMON is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_HOSTAP is not set +# CONFIG_IWM is not set +# CONFIG_LIBERTAS is not set +# CONFIG_P54_COMMON is not set +# CONFIG_RT2X00 is not set +# CONFIG_WL12XX is not set +# CONFIG_ZD1211RW is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -1012,6 +1110,7 @@ CONFIG_NETDEV_10000=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_IPHETH is not set # CONFIG_WAN is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set @@ -1020,6 +1119,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -1027,6 +1127,7 @@ CONFIG_NETDEV_10000=y CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -1043,13 +1144,19 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -1057,6 +1164,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set CONFIG_MOUSE_APPLETOUCH=m @@ -1066,6 +1174,7 @@ CONFIG_MOUSE_BCM5974=m # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=m CONFIG_JOYSTICK_A3D=m @@ -1102,10 +1211,14 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879_I2C is not set # CONFIG_TOUCHSCREEN_AD7879_SPI is not set # CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_S3C2410 is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set @@ -1126,8 +1239,14 @@ CONFIG_TOUCHSCREEN_USB_IRTOUCH=y CONFIG_TOUCHSCREEN_USB_IDEALTEK=y CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y CONFIG_TOUCHSCREEN_USB_GOTOP=y +CONFIG_TOUCHSCREEN_USB_JASTEC=y +CONFIG_TOUCHSCREEN_USB_E2I=y +CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y +CONFIG_TOUCHSCREEN_USB_ETT_TC5UH=y +CONFIG_TOUCHSCREEN_USB_NEXIO=y # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_ATI_REMOTE=m CONFIG_INPUT_ATI_REMOTE2=m @@ -1146,6 +1265,7 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PARKBD is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set CONFIG_GAMEPORT=m # CONFIG_GAMEPORT_NS558 is not set # CONFIG_GAMEPORT_L4 is not set @@ -1169,8 +1289,6 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_N_HDLC is not set # CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set -# CONFIG_SX is not set -# CONFIG_RIO is not set # CONFIG_STALDRV is not set # @@ -1195,6 +1313,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # Non-8250 serial port support # CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS_4=y CONFIG_SERIAL_SAMSUNG_UARTS=4 # CONFIG_SERIAL_SAMSUNG_DEBUG is not set CONFIG_SERIAL_SAMSUNG_CONSOLE=y @@ -1204,6 +1323,7 @@ CONFIG_SERIAL_S3C2440=y # CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -1221,6 +1341,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y @@ -1232,10 +1353,12 @@ CONFIG_I2C_ALGOBIT=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set CONFIG_I2C_S3C2410=y CONFIG_I2C_SIMTEC=y +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1252,20 +1375,9 @@ CONFIG_I2C_SIMTEC=y # CONFIG_I2C_PCA_ISA is not set # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -1278,13 +1390,21 @@ CONFIG_SPI_BITBANG=m CONFIG_SPI_GPIO=m # CONFIG_SPI_LM70_LLP is not set CONFIG_SPI_S3C24XX=m +# CONFIG_SPI_S3C24XX_FIQ is not set CONFIG_SPI_S3C24XX_GPIO=m +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters # CONFIG_SPI_SPIDEV=m CONFIG_SPI_TLE62X0=m + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -1293,13 +1413,16 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -1310,10 +1433,20 @@ CONFIG_GPIOLIB=y # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y CONFIG_HWMON_VID=m +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set @@ -1323,10 +1456,11 @@ CONFIG_HWMON_VID=m # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -1338,6 +1472,7 @@ CONFIG_HWMON_VID=m # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM73 is not set CONFIG_SENSORS_LM75=m # CONFIG_SENSORS_LM77 is not set CONFIG_SENSORS_LM78=m @@ -1358,12 +1493,16 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_S3C is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -1374,9 +1513,8 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1385,6 +1523,7 @@ CONFIG_WATCHDOG=y # # CONFIG_SOFT_WATCHDOG is not set CONFIG_S3C2410_WATCHDOG=y +# CONFIG_MAX63XX_WATCHDOG is not set # # ISA-based Watchdog Cards @@ -1408,11 +1547,13 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set CONFIG_MFD_SM501=y # CONFIG_MFD_SM501_GPIO is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_UCB1400_CORE is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set @@ -1421,200 +1562,19 @@ CONFIG_MFD_SM501=y # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L2_COMMON=m -CONFIG_VIDEO_ALLOW_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -CONFIG_MEDIA_ATTACH=y -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA827X=m -CONFIG_MEDIA_TUNER_TDA18271=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_MT2060=m -CONFIG_MEDIA_TUNER_MT2266=m -CONFIG_MEDIA_TUNER_QT1010=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_MXL5005S=m -CONFIG_MEDIA_TUNER_MXL5007T=m -CONFIG_MEDIA_TUNER_MC44S803=m -CONFIG_VIDEO_V4L2=m -CONFIG_VIDEO_V4L1=m -CONFIG_VIDEOBUF_GEN=m -CONFIG_VIDEOBUF_VMALLOC=m -CONFIG_VIDEO_TVEEPROM=m -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -CONFIG_VIDEO_VIVI=m -CONFIG_VIDEO_PMS=m -CONFIG_VIDEO_BWQCAM=m -CONFIG_VIDEO_CQCAM=m -CONFIG_VIDEO_W9966=m -CONFIG_VIDEO_CPIA=m -CONFIG_VIDEO_CPIA_PP=m -CONFIG_VIDEO_CPIA_USB=m -CONFIG_VIDEO_CPIA2=m -CONFIG_VIDEO_SAA5246A=m -CONFIG_VIDEO_SAA5249=m -CONFIG_VIDEO_AU0828=m -# CONFIG_SOC_CAMERA is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_USB_VIDEO_CLASS is not set -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y -CONFIG_USB_GSPCA=m -# CONFIG_USB_M5602 is not set -# CONFIG_USB_STV06XX is not set -# CONFIG_USB_GSPCA_CONEX is not set -# CONFIG_USB_GSPCA_ETOMS is not set -# CONFIG_USB_GSPCA_FINEPIX is not set -# CONFIG_USB_GSPCA_MARS is not set -# CONFIG_USB_GSPCA_MR97310A is not set -# CONFIG_USB_GSPCA_OV519 is not set -# CONFIG_USB_GSPCA_OV534 is not set -# CONFIG_USB_GSPCA_PAC207 is not set -# CONFIG_USB_GSPCA_PAC7311 is not set -# CONFIG_USB_GSPCA_SONIXB is not set -# CONFIG_USB_GSPCA_SONIXJ is not set -# CONFIG_USB_GSPCA_SPCA500 is not set -# CONFIG_USB_GSPCA_SPCA501 is not set -# CONFIG_USB_GSPCA_SPCA505 is not set -# CONFIG_USB_GSPCA_SPCA506 is not set -# CONFIG_USB_GSPCA_SPCA508 is not set -# CONFIG_USB_GSPCA_SPCA561 is not set -# CONFIG_USB_GSPCA_SQ905 is not set -# CONFIG_USB_GSPCA_SQ905C is not set -# CONFIG_USB_GSPCA_STK014 is not set -# CONFIG_USB_GSPCA_SUNPLUS is not set -# CONFIG_USB_GSPCA_T613 is not set -# CONFIG_USB_GSPCA_TV8532 is not set -# CONFIG_USB_GSPCA_VC032X is not set -# CONFIG_USB_GSPCA_ZC3XX is not set -# CONFIG_VIDEO_PVRUSB2 is not set -# CONFIG_VIDEO_HDPVR is not set -# CONFIG_VIDEO_EM28XX is not set -# CONFIG_VIDEO_CX231XX is not set -# CONFIG_VIDEO_USBVISION is not set -# CONFIG_USB_VICAM is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set -# CONFIG_USB_OV511 is not set -# CONFIG_USB_SE401 is not set -# CONFIG_USB_SN9C102 is not set -# CONFIG_USB_STV680 is not set -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -CONFIG_USB_PWC_INPUT_EVDEV=y -# CONFIG_USB_ZR364XX is not set -# CONFIG_USB_STKWEBCAM is not set -# CONFIG_USB_S2255 is not set -CONFIG_RADIO_ADAPTERS=y -CONFIG_RADIO_CADET=m -CONFIG_RADIO_RTRACK=m -CONFIG_RADIO_RTRACK2=m -CONFIG_RADIO_AZTECH=m -CONFIG_RADIO_GEMTEK=m -CONFIG_RADIO_SF16FMI=m -CONFIG_RADIO_SF16FMR2=m -CONFIG_RADIO_TERRATEC=m -CONFIG_RADIO_TRUST=m -CONFIG_RADIO_TYPHOON=m -CONFIG_RADIO_TYPHOON_PROC_FS=y -CONFIG_RADIO_ZOLTRIX=m -CONFIG_USB_DSBR=m -CONFIG_USB_SI470X=m -CONFIG_USB_MR800=m -CONFIG_RADIO_TEA5764=m -CONFIG_DVB_DYNAMIC_MINORS=y -CONFIG_DVB_CAPTURE_DRIVERS=y -# CONFIG_TTPCI_EEPROM is not set - -# -# Supported USB Adapters -# -CONFIG_DVB_USB=m -# CONFIG_DVB_USB_DEBUG is not set -# CONFIG_DVB_USB_A800 is not set -CONFIG_DVB_USB_DIBUSB_MB=m -# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set -CONFIG_DVB_USB_DIBUSB_MC=m -CONFIG_DVB_USB_DIB0700=m -CONFIG_DVB_USB_UMT_010=m -CONFIG_DVB_USB_CXUSB=m -CONFIG_DVB_USB_M920X=m -# CONFIG_DVB_USB_GL861 is not set -# CONFIG_DVB_USB_AU6610 is not set -# CONFIG_DVB_USB_DIGITV is not set -# CONFIG_DVB_USB_VP7045 is not set -# CONFIG_DVB_USB_VP702X is not set -# CONFIG_DVB_USB_GP8PSK is not set -# CONFIG_DVB_USB_NOVA_T_USB2 is not set -# CONFIG_DVB_USB_TTUSB2 is not set -# CONFIG_DVB_USB_DTT200U is not set -# CONFIG_DVB_USB_OPERA1 is not set -CONFIG_DVB_USB_AF9005=m -# CONFIG_DVB_USB_AF9005_REMOTE is not set -# CONFIG_DVB_USB_DW2102 is not set -# CONFIG_DVB_USB_CINERGY_T2 is not set -# CONFIG_DVB_USB_ANYSEE is not set -# CONFIG_DVB_USB_DTV5100 is not set -# CONFIG_DVB_USB_AF9015 is not set -# CONFIG_DVB_USB_CE6230 is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set -CONFIG_DVB_CX22702=m -CONFIG_DVB_TDA1004X=m -CONFIG_DVB_MT352=m -CONFIG_DVB_ZL10353=m -CONFIG_DVB_DIB3000MB=m -CONFIG_DVB_DIB3000MC=m -CONFIG_DVB_DIB7000M=m -CONFIG_DVB_DIB7000P=m -CONFIG_DVB_LGDT330X=m -CONFIG_DVB_LGDT3305=m -CONFIG_DVB_AU8522=m -CONFIG_DVB_S5H1411=m -CONFIG_DVB_PLL=m -CONFIG_DVB_TUNER_DIB0070=m -CONFIG_DVB_LGS8GL5=m -CONFIG_DAB=y -CONFIG_USB_DABUSB=m +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1653,6 +1613,8 @@ CONFIG_FB_SM501=y # CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_L4F00242T03 is not set +# CONFIG_LCD_LMS283GF05 is not set # CONFIG_LCD_LTV350QV is not set # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_TDO24M is not set @@ -1682,6 +1644,7 @@ CONFIG_FONT_8x16=y # CONFIG_LOGO is not set CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1701,36 +1664,43 @@ CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y +CONFIG_SND_RAWMIDI_SEQ=m +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_AC97_CODEC=m # CONFIG_SND_DRIVERS is not set # CONFIG_SND_ARM is not set # CONFIG_SND_SPI is not set CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=m +# CONFIG_SND_USB_UA101 is not set CONFIG_SND_USB_CAIAQ=m # CONFIG_SND_USB_CAIAQ_INPUT is not set CONFIG_SND_SOC=y CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_S3C24XX_SOC=y -CONFIG_SND_S3C24XX_SOC_I2S=m +CONFIG_SND_S3C24XX_SOC_I2S=y CONFIG_SND_S3C_I2SV2_SOC=m CONFIG_SND_S3C2412_SOC_I2S=m -CONFIG_SND_S3C2443_SOC_AC97=m +CONFIG_SND_S3C_SOC_AC97=m CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m -CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=m +CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=y +# CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23 is not set +# CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES is not set CONFIG_SND_SOC_I2C_AND_SPI=y # CONFIG_SND_SOC_ALL_CODECS is not set CONFIG_SND_SOC_AC97_CODEC=m -CONFIG_SND_SOC_L3=m -CONFIG_SND_SOC_UDA134X=m +CONFIG_SND_SOC_L3=y +CONFIG_SND_SOC_UDA134X=y CONFIG_SND_SOC_WM8750=m # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1743,6 +1713,8 @@ CONFIG_HID=y # Special HID drivers # CONFIG_HID_APPLE=m +# CONFIG_HID_MAGICMOUSE is not set +# CONFIG_HID_WACOM is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1757,8 +1729,6 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set CONFIG_USB_MON=y # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set @@ -1770,6 +1740,7 @@ CONFIG_USB_MON=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1854,6 +1825,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y CONFIG_USB_SERIAL_NAVMAN=m CONFIG_USB_SERIAL_PL2303=y # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QCAUX is not set # CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set @@ -1867,6 +1839,7 @@ CONFIG_USB_SERIAL_PL2303=y CONFIG_USB_SERIAL_OPTION=m # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set # CONFIG_USB_SERIAL_DEBUG is not set # @@ -1879,7 +1852,6 @@ CONFIG_USB_SEVSEG=m CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m -CONFIG_USB_BERRY_CHARGE=m CONFIG_USB_LED=m CONFIG_USB_CYPRESS_CY7C63=m CONFIG_USB_CYTHERM=m @@ -1891,13 +1863,13 @@ CONFIG_USB_TRANCEVIBRATOR=m CONFIG_USB_IOWARRIOR=m CONFIG_USB_TEST=m # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ULPI is not set # CONFIG_NOP_USB_XCEIV is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set @@ -1915,10 +1887,15 @@ CONFIG_MMC_TEST=m # MMC/SD/SDIO Host Controller Drivers # CONFIG_MMC_SDHCI=m +# CONFIG_MMC_SDHCI_PLTFM is not set +# CONFIG_MMC_SDHCI_S3C is not set CONFIG_MMC_SPI=m CONFIG_MMC_S3C=y +# CONFIG_MMC_S3C_HW_SDIO_IRQ is not set +CONFIG_MMC_S3C_PIO=y +# CONFIG_MMC_S3C_DMA is not set +# CONFIG_MMC_S3C_PIODMA is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m @@ -1930,26 +1907,28 @@ CONFIG_LEDS_H1940=m CONFIG_LEDS_PCA9532=m CONFIG_LEDS_GPIO=m CONFIG_LEDS_GPIO_PLATFORM=y -CONFIG_LEDS_LP5521=m +# CONFIG_LEDS_LP3944 is not set CONFIG_LEDS_PCA955X=m CONFIG_LEDS_DAC124S085=m CONFIG_LEDS_PWM=m CONFIG_LEDS_BD2802=m +# CONFIG_LEDS_LT3593 is not set +CONFIG_LEDS_TRIGGERS=y # # LED Triggers # -CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m # CONFIG_LEDS_TRIGGER_IDE_DISK is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=y CONFIG_LEDS_TRIGGER_GPIO=m CONFIG_LEDS_TRIGGER_DEFAULT_ON=m # # iptables trigger is under Netfilter config (LED target) # +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1978,9 +1957,11 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1992,6 +1973,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -2005,7 +1987,9 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -2014,8 +1998,11 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_S3C=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -2032,20 +2019,23 @@ CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set CONFIG_EXT4_FS=m -# CONFIG_EXT4DEV_COMPAT is not set CONFIG_EXT4_FS_XATTR=y CONFIG_EXT4_FS_POSIX_ACL=y # CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_DEBUG is not set CONFIG_JBD=y CONFIG_JBD2=m CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -2053,6 +2043,7 @@ CONFIG_INOTIFY_USER=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# CONFIG_CUSE is not set CONFIG_GENERIC_ACL=y # @@ -2111,6 +2102,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y CONFIG_SQUASHFS=m # CONFIG_SQUASHFS_EMBEDDED is not set @@ -2127,7 +2119,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -2149,6 +2140,7 @@ CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set @@ -2230,6 +2222,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -2246,6 +2239,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -2264,28 +2258,28 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set @@ -2297,7 +2291,9 @@ CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y +# CONFIG_EARLY_PRINTK is not set # CONFIG_DEBUG_ICEDCC is not set +# CONFIG_OC_ETM is not set CONFIG_DEBUG_S3C_UART=0 # @@ -2306,13 +2302,16 @@ CONFIG_DEBUG_S3C_UART=0 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m CONFIG_CRYPTO_ALGAPI2=m CONFIG_CRYPTO_AEAD=m @@ -2355,11 +2354,13 @@ CONFIG_CRYPTO_ECB=m # CONFIG_CRYPTO_HMAC=m # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -2420,9 +2421,11 @@ CONFIG_CRC7=m CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m @@ -2430,3 +2433,4 @@ CONFIG_TEXTSEARCH_FSM=m CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index 5e7d4c1b8fc1..a3a9993e5cd0 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -1,11 +1,12 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc4 -# Tue Jan 19 13:12:40 2010 +# Linux kernel version: 2.6.34 +# Sat May 22 03:17:32 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y @@ -18,6 +19,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -53,7 +55,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -89,10 +90,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -164,7 +169,7 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set -# CONFIG_FREEZER is not set +CONFIG_FREEZER=y # # System Type @@ -175,6 +180,7 @@ CONFIG_MMU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set @@ -184,7 +190,6 @@ CONFIG_MMU=y # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -201,30 +206,44 @@ CONFIG_MMU=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set CONFIG_ARCH_S3C64XX=y # CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set # CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_BCMRING is not set -# CONFIG_ARCH_U8500 is not set CONFIG_PLAT_SAMSUNG=y + +# +# Boot options +# +CONFIG_S3C_BOOT_ERROR_RESET=y +CONFIG_S3C_BOOT_UART_FORCE_FIFO=y +CONFIG_S3C_LOWLEVEL_UART_PORT=0 CONFIG_SAMSUNG_CLKSRC=y CONFIG_SAMSUNG_IRQ_VIC_TIMER=y CONFIG_SAMSUNG_IRQ_UART=y +CONFIG_SAMSUNG_GPIOLIB_4BIT=y CONFIG_S3C_GPIO_CFG_S3C24XX=y CONFIG_S3C_GPIO_CFG_S3C64XX=y CONFIG_S3C_GPIO_PULL_UPDOWN=y CONFIG_SAMSUNG_GPIO_EXTRA=0 +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_GPIO_TRACK=y # CONFIG_S3C_ADC is not set CONFIG_S3C_DEV_HSMMC=y CONFIG_S3C_DEV_HSMMC1=y @@ -233,36 +252,29 @@ CONFIG_S3C_DEV_FB=y CONFIG_S3C_DEV_USB_HOST=y CONFIG_S3C_DEV_USB_HSOTG=y CONFIG_S3C_DEV_NAND=y +CONFIG_S3C_DMA=y + +# +# Power management +# +# CONFIG_SAMSUNG_PM_DEBUG is not set +# CONFIG_S3C_PM_DEBUG_LED_SMDK is not set +# CONFIG_SAMSUNG_PM_CHECK is not set CONFIG_PLAT_S3C64XX=y -CONFIG_CPU_S3C6400_INIT=y -CONFIG_CPU_S3C6400_CLOCK=y -# CONFIG_S3C64XX_DMA is not set +CONFIG_CPU_S3C6410=y +CONFIG_S3C64XX_DMA=y +CONFIG_S3C64XX_SETUP_SDHCI=y CONFIG_S3C64XX_SETUP_I2C0=y CONFIG_S3C64XX_SETUP_I2C1=y CONFIG_S3C64XX_SETUP_FB_24BPP=y CONFIG_S3C64XX_SETUP_SDHCI_GPIO=y -CONFIG_PLAT_S3C=y - -# -# Boot options -# -CONFIG_S3C_BOOT_ERROR_RESET=y -CONFIG_S3C_BOOT_UART_FORCE_FIFO=y - -# -# Power management -# -CONFIG_S3C_LOWLEVEL_UART_PORT=0 -CONFIG_S3C_GPIO_SPACE=0 -CONFIG_S3C_GPIO_TRACK=y # CONFIG_MACH_SMDK6400 is not set -CONFIG_CPU_S3C6410=y -CONFIG_S3C6410_SETUP_SDHCI=y # CONFIG_MACH_ANW6410 is not set CONFIG_MACH_SMDK6410=y CONFIG_SMDK6410_SD_CH0=y # CONFIG_SMDK6410_SD_CH1 is not set # CONFIG_SMDK6410_WM1190_EV1 is not set +# CONFIG_SMDK6410_WM1192_EV1 is not set # CONFIG_MACH_NCP is not set # CONFIG_MACH_HMT is not set @@ -290,6 +302,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_411920 is not set CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 @@ -371,7 +384,14 @@ CONFIG_HAVE_AOUT=y # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_PM_OPS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_NET is not set @@ -392,7 +412,88 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_S3C2410=y +# CONFIG_MTD_NAND_S3C2410_DEBUG is not set +# CONFIG_MTD_NAND_S3C2410_HWECC is not set +# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set @@ -413,6 +514,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set # CONFIG_C2PORT is not set @@ -430,6 +532,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -527,12 +630,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # Non-8250 serial port support # CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS_4=y CONFIG_SERIAL_SAMSUNG_UARTS=4 # CONFIG_SERIAL_SAMSUNG_DEBUG is not set CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_S3C6400=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -561,6 +666,7 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_OCORES is not set CONFIG_I2C_S3C2410=y # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -573,15 +679,9 @@ CONFIG_I2C_S3C2410=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -596,10 +696,12 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set @@ -633,10 +735,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -699,10 +802,13 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_UCB1400_CORE is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set @@ -711,12 +817,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -738,7 +845,44 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_SOUND is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_SOC=m +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_S3C24XX_SOC=m +CONFIG_SND_S3C_SOC_AC97=m +CONFIG_SND_SOC_SMDK_WM9713=m +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_WM9713=m +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HIDRAW is not set @@ -784,8 +928,6 @@ CONFIG_MMC_SDHCI=y # CONFIG_MMC_SDHCI_PLTFM is not set CONFIG_MMC_SDHCI_S3C=y # CONFIG_MMC_SDHCI_S3C_DMA is not set -# CONFIG_MMC_AT91 is not set -# CONFIG_MMC_ATMELMCI is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set @@ -869,6 +1011,8 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p6440_defconfig index 279a15e53114..619bfab3ab39 100644 --- a/arch/arm/configs/s5p6440_defconfig +++ b/arch/arm/configs/s5p6440_defconfig @@ -1,11 +1,12 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc2 -# Sat Jan 9 16:33:55 2010 +# Linux kernel version: 2.6.34 +# Sat May 22 03:18:18 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y @@ -17,6 +18,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -30,6 +32,12 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y # CONFIG_SYSVIPC is not set # CONFIG_BSD_PROCESS_ACCT is not set @@ -46,7 +54,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -60,6 +67,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -81,10 +89,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -167,6 +179,7 @@ CONFIG_MMU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set @@ -176,7 +189,6 @@ CONFIG_MMU=y # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -193,44 +205,50 @@ CONFIG_MMU=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set CONFIG_ARCH_S5P6440=y +# CONFIG_ARCH_S5P6442 is not set # CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_BCMRING is not set -# CONFIG_ARCH_U8500 is not set CONFIG_PLAT_SAMSUNG=y -CONFIG_SAMSUNG_CLKSRC=y -CONFIG_SAMSUNG_IRQ_VIC_TIMER=y -CONFIG_SAMSUNG_IRQ_UART=y -CONFIG_SAMSUNG_GPIO_EXTRA=0 -CONFIG_PLAT_S3C=y # # Boot options # CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_S3C_BOOT_UART_FORCE_FIFO=y +CONFIG_S3C_LOWLEVEL_UART_PORT=1 +CONFIG_SAMSUNG_CLKSRC=y +CONFIG_SAMSUNG_IRQ_VIC_TIMER=y +CONFIG_SAMSUNG_IRQ_UART=y +CONFIG_SAMSUNG_GPIOLIB_4BIT=y +CONFIG_S3C_GPIO_CFG_S3C24XX=y +CONFIG_S3C_GPIO_CFG_S3C64XX=y +CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_SAMSUNG_GPIO_EXTRA=0 +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_GPIO_TRACK=y +# CONFIG_S3C_ADC is not set # # Power management # -CONFIG_S3C_LOWLEVEL_UART_PORT=1 -CONFIG_S3C_GPIO_SPACE=0 -CONFIG_S3C_GPIO_TRACK=y CONFIG_PLAT_S5P=y -CONFIG_CPU_S5P6440_INIT=y -CONFIG_CPU_S5P6440_CLOCK=y CONFIG_CPU_S5P6440=y CONFIG_MACH_SMDK6440=y @@ -258,6 +276,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_411920 is not set CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 @@ -382,6 +401,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -518,12 +538,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=3 # Non-8250 serial port support # CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS_4=y CONFIG_SERIAL_SAMSUNG_UARTS=4 # CONFIG_SERIAL_SAMSUNG_DEBUG is not set CONFIG_SERIAL_SAMSUNG_CONSOLE=y -CONFIG_SERIAL_S5P6440=y +CONFIG_SERIAL_S3C6400=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -549,6 +571,7 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: @@ -704,6 +727,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -962,8 +986,10 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig index 74e20bfc0487..d7ea27509cf4 100644 --- a/arch/arm/configs/s5p6442_defconfig +++ b/arch/arm/configs/s5p6442_defconfig @@ -1,11 +1,12 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc4 -# Mon Jan 25 08:50:28 2010 +# Linux kernel version: 2.6.34 +# Sat May 22 03:18:19 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y @@ -17,6 +18,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -52,7 +54,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -88,10 +89,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -174,6 +179,7 @@ CONFIG_MMU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set @@ -183,7 +189,6 @@ CONFIG_MMU=y # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -200,9 +205,11 @@ CONFIG_MMU=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set @@ -210,14 +217,22 @@ CONFIG_MMU=y # CONFIG_ARCH_S5P6440 is not set CONFIG_ARCH_S5P6442=y # CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_BCMRING is not set -# CONFIG_ARCH_U8500 is not set CONFIG_PLAT_SAMSUNG=y + +# +# Boot options +# +# CONFIG_S3C_BOOT_ERROR_RESET is not set +CONFIG_S3C_BOOT_UART_FORCE_FIFO=y +CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_SAMSUNG_CLKSRC=y CONFIG_SAMSUNG_IRQ_VIC_TIMER=y CONFIG_SAMSUNG_IRQ_UART=y @@ -226,21 +241,13 @@ CONFIG_S3C_GPIO_CFG_S3C24XX=y CONFIG_S3C_GPIO_CFG_S3C64XX=y CONFIG_S3C_GPIO_PULL_UPDOWN=y CONFIG_SAMSUNG_GPIO_EXTRA=0 +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_GPIO_TRACK=y # CONFIG_S3C_ADC is not set # # Power management # -CONFIG_PLAT_S3C=y - -# -# Boot options -# -# CONFIG_S3C_BOOT_ERROR_RESET is not set -CONFIG_S3C_BOOT_UART_FORCE_FIFO=y -CONFIG_S3C_LOWLEVEL_UART_PORT=1 -CONFIG_S3C_GPIO_SPACE=0 -CONFIG_S3C_GPIO_TRACK=y CONFIG_PLAT_S5P=y CONFIG_CPU_S5P6442=y CONFIG_MACH_SMDK6442=y @@ -269,6 +276,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_411920 is not set CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 @@ -394,6 +402,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -515,6 +524,7 @@ CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_S5PV210=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -540,6 +550,7 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: @@ -685,6 +696,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig index dc108afc060c..2053be6c9af1 100644 --- a/arch/arm/configs/s5pc100_defconfig +++ b/arch/arm/configs/s5pc100_defconfig @@ -171,7 +171,7 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set -CONFIG_ARCH_S5PC1XX=y +CONFIG_ARCH_S5PC100=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set diff --git a/arch/arm/configs/s5pc110_defconfig b/arch/arm/configs/s5pc110_defconfig index 6ea636131ac8..796cb78498c3 100644 --- a/arch/arm/configs/s5pc110_defconfig +++ b/arch/arm/configs/s5pc110_defconfig @@ -1,11 +1,12 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc4 -# Wed Feb 24 15:36:54 2010 +# Linux kernel version: 2.6.34 +# Sat May 22 03:18:21 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y @@ -17,6 +18,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_ARM_L1_CACHE_SHIFT_6=y CONFIG_VECTORS_BASE=0xffff0000 @@ -54,7 +56,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -90,10 +91,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -176,6 +181,7 @@ CONFIG_MMU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set @@ -185,7 +191,6 @@ CONFIG_MMU=y # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -202,9 +207,11 @@ CONFIG_MMU=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set @@ -216,10 +223,10 @@ CONFIG_ARCH_S5PV210=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_BCMRING is not set -# CONFIG_ARCH_U8500 is not set CONFIG_PLAT_SAMSUNG=y # @@ -274,6 +281,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set @@ -404,6 +412,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -526,6 +535,7 @@ CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_S5PV210=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -551,6 +561,7 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: @@ -696,6 +707,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig index 3f7d47491b54..6831dab97d96 100644 --- a/arch/arm/configs/s5pv210_defconfig +++ b/arch/arm/configs/s5pv210_defconfig @@ -1,11 +1,12 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc4 -# Wed Feb 24 15:36:16 2010 +# Linux kernel version: 2.6.34 +# Sat May 22 03:18:22 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y @@ -17,6 +18,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_ARM_L1_CACHE_SHIFT_6=y CONFIG_VECTORS_BASE=0xffff0000 @@ -54,7 +56,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -90,10 +91,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -176,6 +181,7 @@ CONFIG_MMU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set @@ -185,7 +191,6 @@ CONFIG_MMU=y # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -202,9 +207,11 @@ CONFIG_MMU=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set @@ -216,10 +223,10 @@ CONFIG_ARCH_S5PV210=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_BCMRING is not set -# CONFIG_ARCH_U8500 is not set CONFIG_PLAT_SAMSUNG=y # @@ -274,6 +281,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set @@ -404,6 +412,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y @@ -526,6 +535,7 @@ CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_S5PV210=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -551,6 +561,7 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: @@ -696,6 +707,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h index 182310b99195..6d7485aff955 100644 --- a/arch/arm/include/asm/hardirq.h +++ b/arch/arm/include/asm/hardirq.h @@ -12,7 +12,9 @@ typedef struct { #include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ -#if NR_IRQS > 256 +#if NR_IRQS > 512 +#define HARDIRQ_BITS 10 +#elif NR_IRQS > 256 #define HARDIRQ_BITS 9 #else #define HARDIRQ_BITS 8 diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h index c4b2ea3fbe42..e51b1e81df05 100644 --- a/arch/arm/include/asm/kmap_types.h +++ b/arch/arm/include/asm/kmap_types.h @@ -20,6 +20,7 @@ enum km_type { KM_SOFTIRQ1, KM_L1_CACHE, KM_L2_CACHE, + KM_KDB, KM_TYPE_NR }; diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c index a5b846b9895d..c868a8864117 100644 --- a/arch/arm/kernel/kgdb.c +++ b/arch/arm/kernel/kgdb.c @@ -98,6 +98,11 @@ sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task) gdb_regs[_CPSR] = thread_regs->ARM_cpsr; } +void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc) +{ + regs->ARM_pc = pc; +} + static int compiled_break; int kgdb_arch_handle_exception(int exception_vector, int signo, diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index c91c77b54dea..122d999bdc7c 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -593,6 +593,7 @@ static int __init parse_tag_revision(const struct tag *tag) __tagtable(ATAG_REVISION, parse_tag_revision); +#ifndef CONFIG_CMDLINE_FORCE static int __init parse_tag_cmdline(const struct tag *tag) { strlcpy(default_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE); @@ -600,6 +601,7 @@ static int __init parse_tag_cmdline(const struct tag *tag) } __tagtable(ATAG_CMDLINE, parse_tag_cmdline); +#endif /* CONFIG_CMDLINE_FORCE */ /* * Scan the tag table for this tag, and call its parse function. diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 50292cd9c120..dd81a918c106 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -26,6 +26,7 @@ * http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html */ +#ifndef __CHECKER__ #if !defined (__ARM_EABI__) #warning Your compiler does not have EABI support. #warning ARM unwind is known to compile only with EABI compilers. @@ -34,6 +35,7 @@ #warning Your compiler is too buggy; it is known to not compile ARM unwind support. #warning Change compiler or disable ARM_UNWIND option. #endif +#endif /* __CHECKER__ */ #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 98f9f4bc9396..ee800595594d 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -25,7 +25,6 @@ #include <linux/leds.h> #include <linux/clk.h> -#include <mach/hardware.h> #include <video/atmel_lcdc.h> #include <asm/setup.h> diff --git a/arch/arm/mach-clps711x/Makefile.boot b/arch/arm/mach-clps711x/Makefile.boot index d3d29339e149..a51fcef64fe0 100644 --- a/arch/arm/mach-clps711x/Makefile.boot +++ b/arch/arm/mach-clps711x/Makefile.boot @@ -1,7 +1,6 @@ # The standard locations for stuff on CLPS711x type processors - zreladdr-y := 0xc0028000 + zreladdr-y := 0xc0028000 params_phys-y := 0xc0000100 # Should probably have some agreement on these... initrd_phys-$(CONFIG_ARCH_P720T) := 0xc0400000 initrd_phys-$(CONFIG_ARCH_CDB89712) := 0x00700000 - diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h new file mode 100644 index 000000000000..0a37961b3453 --- /dev/null +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h @@ -0,0 +1,27 @@ +#ifndef __ASM_MACH_EP93XX_SPI_H +#define __ASM_MACH_EP93XX_SPI_H + +struct spi_device; + +/** + * struct ep93xx_spi_info - EP93xx specific SPI descriptor + * @num_chipselect: number of chip selects on this board, must be + * at least one + */ +struct ep93xx_spi_info { + int num_chipselect; +}; + +/** + * struct ep93xx_spi_chip_ops - operation callbacks for SPI slave device + * @setup: setup the chip select mechanism + * @cleanup: cleanup the chip select mechanism + * @cs_control: control the device chip select + */ +struct ep93xx_spi_chip_ops { + int (*setup)(struct spi_device *spi); + void (*cleanup)(struct spi_device *spi); + void (*cs_control)(struct spi_device *spi, int value); +}; + +#endif /* __ASM_MACH_EP93XX_SPI_H */ diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h index 93107d88ff3a..0eabec62cd9d 100644 --- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h +++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h @@ -9,9 +9,6 @@ * febff000 22000000 4K model number register * febfe000 22400000 4K options register * febfd000 22800000 4K options register #2 - * febfc000 [67]0000000 4K NAND data register - * febfb000 [67]0400000 4K NAND control register - * febfa000 [67]0800000 4K NAND busy register * febf9000 10800000 4K TS-5620 RTC index register * febf8000 11700000 4K TS-5620 RTC data register */ @@ -41,22 +38,6 @@ #define TS72XX_OPTIONS2_TS9420_BOOT 0x02 -#define TS72XX_NAND1_DATA_PHYS_BASE 0x60000000 -#define TS72XX_NAND2_DATA_PHYS_BASE 0x70000000 -#define TS72XX_NAND_DATA_VIRT_BASE 0xfebfc000 -#define TS72XX_NAND_DATA_SIZE 0x00001000 - -#define TS72XX_NAND1_CONTROL_PHYS_BASE 0x60400000 -#define TS72XX_NAND2_CONTROL_PHYS_BASE 0x70400000 -#define TS72XX_NAND_CONTROL_VIRT_BASE 0xfebfb000 -#define TS72XX_NAND_CONTROL_SIZE 0x00001000 - -#define TS72XX_NAND1_BUSY_PHYS_BASE 0x60800000 -#define TS72XX_NAND2_BUSY_PHYS_BASE 0x70800000 -#define TS72XX_NAND_BUSY_VIRT_BASE 0xfebfa000 -#define TS72XX_NAND_BUSY_SIZE 0x00001000 - - #define TS72XX_RTC_INDEX_VIRT_BASE 0xfebf9000 #define TS72XX_RTC_INDEX_PHYS_BASE 0x10800000 #define TS72XX_RTC_INDEX_SIZE 0x00001000 diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 9553031900b0..ae7319e588c7 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -10,12 +10,16 @@ * your option) any later version. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/m48t86.h> #include <linux/mtd/physmap.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> #include <mach/hardware.h> #include <mach/ts72xx.h> @@ -54,92 +58,162 @@ static struct map_desc ts72xx_io_desc[] __initdata = { } }; -static struct map_desc ts72xx_nand_io_desc[] __initdata = { - { - .virtual = TS72XX_NAND_DATA_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_NAND1_DATA_PHYS_BASE), - .length = TS72XX_NAND_DATA_SIZE, - .type = MT_DEVICE, - }, { - .virtual = TS72XX_NAND_CONTROL_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_NAND1_CONTROL_PHYS_BASE), - .length = TS72XX_NAND_CONTROL_SIZE, - .type = MT_DEVICE, - }, { - .virtual = TS72XX_NAND_BUSY_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_NAND1_BUSY_PHYS_BASE), - .length = TS72XX_NAND_BUSY_SIZE, - .type = MT_DEVICE, +static void __init ts72xx_map_io(void) +{ + ep93xx_map_io(); + iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc)); +} + + +/************************************************************************* + * NAND flash + *************************************************************************/ +#define TS72XX_NAND_CONTROL_ADDR_LINE 22 /* 0xN0400000 */ +#define TS72XX_NAND_BUSY_ADDR_LINE 23 /* 0xN0800000 */ + +static void ts72xx_nand_hwcontrol(struct mtd_info *mtd, + int cmd, unsigned int ctrl) +{ + struct nand_chip *chip = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + void __iomem *addr = chip->IO_ADDR_R; + unsigned char bits; + + addr += (1 << TS72XX_NAND_CONTROL_ADDR_LINE); + + bits = __raw_readb(addr) & ~0x07; + bits |= (ctrl & NAND_NCE) << 2; /* bit 0 -> bit 2 */ + bits |= (ctrl & NAND_CLE); /* bit 1 -> bit 1 */ + bits |= (ctrl & NAND_ALE) >> 2; /* bit 2 -> bit 0 */ + + __raw_writeb(bits, addr); } -}; -static struct map_desc ts72xx_alternate_nand_io_desc[] __initdata = { + if (cmd != NAND_CMD_NONE) + __raw_writeb(cmd, chip->IO_ADDR_W); +} + +static int ts72xx_nand_device_ready(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + void __iomem *addr = chip->IO_ADDR_R; + + addr += (1 << TS72XX_NAND_BUSY_ADDR_LINE); + + return !!(__raw_readb(addr) & 0x20); +} + +static const char *ts72xx_nand_part_probes[] = { "cmdlinepart", NULL }; + +#define TS72XX_BOOTROM_PART_SIZE (SZ_16K) +#define TS72XX_REDBOOT_PART_SIZE (SZ_2M + SZ_1M) + +static struct mtd_partition ts72xx_nand_parts[] = { { - .virtual = TS72XX_NAND_DATA_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_NAND2_DATA_PHYS_BASE), - .length = TS72XX_NAND_DATA_SIZE, - .type = MT_DEVICE, + .name = "TS-BOOTROM", + .offset = 0, + .size = TS72XX_BOOTROM_PART_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { - .virtual = TS72XX_NAND_CONTROL_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_NAND2_CONTROL_PHYS_BASE), - .length = TS72XX_NAND_CONTROL_SIZE, - .type = MT_DEVICE, + .name = "Linux", + .offset = MTDPART_OFS_APPEND, + .size = 0, /* filled in later */ }, { - .virtual = TS72XX_NAND_BUSY_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_NAND2_BUSY_PHYS_BASE), - .length = TS72XX_NAND_BUSY_SIZE, - .type = MT_DEVICE, - } + .name = "RedBoot", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, }; -static void __init ts72xx_map_io(void) +static void ts72xx_nand_set_parts(uint64_t size, + struct platform_nand_chip *chip) { - ep93xx_map_io(); - iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc)); + /* Factory TS-72xx boards only come with 32MiB or 128MiB NAND options */ + if (size == SZ_32M || size == SZ_128M) { + /* Set the "Linux" partition size */ + ts72xx_nand_parts[1].size = size - TS72XX_REDBOOT_PART_SIZE; - /* - * The TS-7200 has NOR flash, the other models have NAND flash. - */ - if (!board_is_ts7200()) { - if (is_ts9420_installed()) { - iotable_init(ts72xx_alternate_nand_io_desc, - ARRAY_SIZE(ts72xx_alternate_nand_io_desc)); - } else { - iotable_init(ts72xx_nand_io_desc, - ARRAY_SIZE(ts72xx_nand_io_desc)); - } + chip->partitions = ts72xx_nand_parts; + chip->nr_partitions = ARRAY_SIZE(ts72xx_nand_parts); + } else { + pr_warning("Unknown nand disk size:%lluMiB\n", size >> 20); } } +static struct platform_nand_data ts72xx_nand_data = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .chip_delay = 15, + .part_probe_types = ts72xx_nand_part_probes, + .set_parts = ts72xx_nand_set_parts, + }, + .ctrl = { + .cmd_ctrl = ts72xx_nand_hwcontrol, + .dev_ready = ts72xx_nand_device_ready, + }, +}; + +static struct resource ts72xx_nand_resource[] = { + { + .start = 0, /* filled in later */ + .end = 0, /* filled in later */ + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ts72xx_nand_flash = { + .name = "gen_nand", + .id = -1, + .dev.platform_data = &ts72xx_nand_data, + .resource = ts72xx_nand_resource, + .num_resources = ARRAY_SIZE(ts72xx_nand_resource), +}; + + /************************************************************************* * NOR flash (TS-7200 only) *************************************************************************/ -static struct physmap_flash_data ts72xx_flash_data = { +static struct physmap_flash_data ts72xx_nor_data = { .width = 2, }; -static struct resource ts72xx_flash_resource = { +static struct resource ts72xx_nor_resource = { .start = EP93XX_CS6_PHYS_BASE, .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1, .flags = IORESOURCE_MEM, }; -static struct platform_device ts72xx_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &ts72xx_flash_data, - }, - .num_resources = 1, - .resource = &ts72xx_flash_resource, +static struct platform_device ts72xx_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev.platform_data = &ts72xx_nor_data, + .resource = &ts72xx_nor_resource, + .num_resources = 1, }; static void __init ts72xx_register_flash(void) { - if (board_is_ts7200()) - platform_device_register(&ts72xx_flash); + if (board_is_ts7200()) { + platform_device_register(&ts72xx_nor_flash); + } else { + resource_size_t start; + + if (is_ts9420_installed()) + start = EP93XX_CS7_PHYS_BASE; + else + start = EP93XX_CS6_PHYS_BASE; + + ts72xx_nand_resource[0].start = start; + ts72xx_nand_resource[0].end = start + SZ_16M - 1; + + platform_device_register(&ts72xx_nand_flash); + } } + static unsigned char ts72xx_rtc_readbyte(unsigned long addr) { __raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE); diff --git a/arch/arm/mach-footbridge/ebsa285-pci.c b/arch/arm/mach-footbridge/ebsa285-pci.c index 720c0bac1702..e5ab5bddbc8c 100644 --- a/arch/arm/mach-footbridge/ebsa285-pci.c +++ b/arch/arm/mach-footbridge/ebsa285-pci.c @@ -20,9 +20,9 @@ static int __init ebsa285_map_irq(struct pci_dev *dev, u8 slot, u8 pin) if (dev->vendor == PCI_VENDOR_ID_CONTAQ && dev->device == PCI_DEVICE_ID_CONTAQ_82C693) switch (PCI_FUNC(dev->devfn)) { - case 1: return 14; - case 2: return 15; - case 3: return 12; + case 1: return 14; + case 2: return 15; + case 3: return 12; } return irqmap_ebsa285[(slot + pin) & 3]; diff --git a/arch/arm/mach-h720x/common.h b/arch/arm/mach-h720x/common.h index d8798dbc44f8..7dd5fa604efc 100644 --- a/arch/arm/mach-h720x/common.h +++ b/arch/arm/mach-h720x/common.h @@ -14,13 +14,13 @@ */ extern unsigned long h720x_gettimeoffset(void); -extern void __init h720x_init_irq (void); +extern void __init h720x_init_irq(void); extern void __init h720x_map_io(void); #ifdef CONFIG_ARCH_H7202 extern struct sys_timer h7202_timer; extern void __init init_hw_h7202(void); -extern void __init h7202_init_irq (void); +extern void __init h7202_init_irq(void); extern void __init h7202_init_time(void); #endif diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index f759ca243925..6072eaa5e66a 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -305,6 +305,15 @@ void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, platform_device_register(&kirkwood_nand_flash); } +void __init kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, + int (*dev_ready)(struct mtd_info *)) +{ + kirkwood_clk_ctrl |= CGC_RUNIT; + kirkwood_nand_data.parts = parts; + kirkwood_nand_data.nr_parts = nr_parts; + kirkwood_nand_data.dev_ready = dev_ready; + platform_device_register(&kirkwood_nand_flash); +} /***************************************************************************** * SoC RTC diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index d7de43464358..05e8a8a5692e 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -16,6 +16,7 @@ struct mv643xx_eth_platform_data; struct mv_sata_platform_data; struct mvsdio_platform_data; struct mtd_partition; +struct mtd_info; /* * Basic Kirkwood init functions used early by machine-setup. @@ -41,6 +42,7 @@ void kirkwood_i2c_init(void); void kirkwood_uart0_init(void); void kirkwood_uart1_init(void); void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay); +void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *)); extern int kirkwood_tclk; extern struct sys_timer kirkwood_timer; diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c index cccb9f3c9d01..db9381b85bf0 100644 --- a/arch/arm/mach-msm/board-msm7x27.c +++ b/arch/arm/mach-msm/board-msm7x27.c @@ -20,7 +20,6 @@ #include <linux/input.h> #include <linux/io.h> #include <linux/delay.h> -#include <linux/bootmem.h> #include <linux/power_supply.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index bac1f3c38a3b..e32981928c77 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -20,7 +20,6 @@ #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/delay.h> -#include <linux/bootmem.h> #include <linux/io.h> #include <linux/smsc911x.h> diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index ec4606643d2c..e3cc80792d6c 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -19,7 +19,6 @@ #include <linux/irq.h> #include <linux/gpio.h> #include <linux/platform_device.h> -#include <linux/bootmem.h> #include <linux/delay.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c index 3d725ae518e4..d029d1f5f9e2 100644 --- a/arch/arm/mach-msm/dma.c +++ b/arch/arm/mach-msm/dma.c @@ -69,6 +69,8 @@ void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) writel(DMOV_CONFIG_IRQ_EN, DMOV_CONFIG(id)); } #endif + if (cmd->execute_func) + cmd->execute_func(cmd); PRINT_IO("msm_dmov_enqueue_cmd(%d), start command, status %x\n", id, status); list_add_tail(&cmd->list, &active_commands[id]); if (!channel_active) @@ -116,6 +118,7 @@ int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) cmd.dmov_cmd.cmdptr = cmdptr; cmd.dmov_cmd.complete_func = dmov_exec_cmdptr_complete_func; + cmd.dmov_cmd.execute_func = NULL; cmd.id = id; init_completion(&cmd.complete); @@ -221,6 +224,8 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id) cmd = list_entry(ready_commands[id].next, typeof(*cmd), list); list_del(&cmd->list); list_add_tail(&cmd->list, &active_commands[id]); + if (cmd->execute_func) + cmd->execute_func(cmd); PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id); writel(cmd->cmdptr, DMOV_CMD_PTR(id)); } diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h index 04c51cc04f31..00f9bbfadbe6 100644 --- a/arch/arm/mach-msm/include/mach/dma.h +++ b/arch/arm/mach-msm/include/mach/dma.h @@ -28,6 +28,8 @@ struct msm_dmov_cmd { void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result, struct msm_dmov_errdata *err); + void (*execute_func)(struct msm_dmov_cmd *cmd); + void *data; }; void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd); diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c index b91e412f7b3e..a0aeb8a4adc1 100644 --- a/arch/arm/mach-mx2/devices.c +++ b/arch/arm/mach-mx2/devices.c @@ -109,12 +109,7 @@ DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5); DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6); #endif -/* - * Watchdog: - * - i.MX1 - * - i.MX21 - * - i.MX27 - */ +/* Watchdog: i.MX1 has seperate driver, i.MX21 and i.MX27 are equal */ static struct resource mxc_wdt_resources[] = { { .start = MX2x_WDOG_BASE_ADDR, @@ -124,7 +119,7 @@ static struct resource mxc_wdt_resources[] = { }; struct platform_device mxc_wdt = { - .name = "mxc_wdt", + .name = "imx2-wdt", .id = 0, .num_resources = ARRAY_SIZE(mxc_wdt_resources), .resource = mxc_wdt_resources, @@ -483,8 +478,8 @@ int __init mxc_register_gpios(void) #ifdef CONFIG_MACH_MX21 static struct resource mx21_usbhc_resources[] = { { - .start = MX21_BASE_ADDR, - .end = MX21_BASE_ADDR + 0x1FFF, + .start = MX21_USBOTG_BASE_ADDR, + .end = MX21_USBOTG_BASE_ADDR + SZ_8K - 1, .flags = IORESOURCE_MEM, }, { diff --git a/arch/arm/mach-mx2/mach-pca100.c b/arch/arm/mach-mx2/mach-pca100.c index 778fff230918..a87422ed4ff5 100644 --- a/arch/arm/mach-mx2/mach-pca100.c +++ b/arch/arm/mach-mx2/mach-pca100.c @@ -145,6 +145,7 @@ static struct mxc_nand_platform_data pca100_nand_board_info = { static struct platform_device *platform_devices[] __initdata = { &mxc_w1_master_device, &mxc_fec_device, + &mxc_wdt, }; static struct imxi2c_platform_data pca100_i2c_1_data = { diff --git a/arch/arm/mach-mx2/mach-pcm038.c b/arch/arm/mach-mx2/mach-pcm038.c index 035fbe046ec0..36c89431679a 100644 --- a/arch/arm/mach-mx2/mach-pcm038.c +++ b/arch/arm/mach-mx2/mach-pcm038.c @@ -182,6 +182,7 @@ static struct platform_device *platform_devices[] __initdata = { &mxc_w1_master_device, &mxc_fec_device, &pcm038_sram_mtd_device, + &mxc_wdt, }; /* On pcm038 there's a sram attached to CS1, we enable the chipselect here and diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c index 3f4b8a0b5fac..3a405fa400eb 100644 --- a/arch/arm/mach-mx25/devices.c +++ b/arch/arm/mach-mx25/devices.c @@ -500,3 +500,18 @@ struct platform_device mx25_fb_device = { .coherent_dma_mask = 0xFFFFFFFF, }, }; + +static struct resource mxc_wdt_resources[] = { + { + .start = MX25_WDOG_BASE_ADDR, + .end = MX25_WDOG_BASE_ADDR + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device mxc_wdt = { + .name = "imx2-wdt", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_wdt_resources), + .resource = mxc_wdt_resources, +}; diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h index 39560e13bc0d..cee12c0a0be6 100644 --- a/arch/arm/mach-mx25/devices.h +++ b/arch/arm/mach-mx25/devices.h @@ -21,3 +21,4 @@ extern struct platform_device mx25_fec_device; extern struct platform_device mxc_nand_device; extern struct platform_device mx25_rtc_device; extern struct platform_device mx25_fb_device; +extern struct platform_device mxc_wdt; diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 170f68e46dd5..344753fdf25e 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -82,6 +82,7 @@ config MACH_MX31MOBOARD config MACH_MX31LILLY bool "Support MX31 LILLY-1131 platforms (INCO startec)" select ARCH_MX31 + select MXC_ULPI if USB_ULPI help Include support for mx31 based LILLY1131 modules. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index f8911154a9fa..db7acd6e9101 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -582,12 +582,50 @@ static struct resource imx_wdt_resources[] = { }; struct platform_device imx_wdt_device0 = { - .name = "imx-wdt", + .name = "imx2-wdt", .id = 0, .num_resources = ARRAY_SIZE(imx_wdt_resources), .resource = imx_wdt_resources, }; +static struct resource imx_rtc_resources[] = { + { + .start = MX31_RTC_BASE_ADDR, + .end = MX31_RTC_BASE_ADDR + 0x3fff, + .flags = IORESOURCE_MEM, + }, + { + .start = MX31_INT_RTC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device imx_rtc_device0 = { + .name = "mxc_rtc", + .id = -1, + .num_resources = ARRAY_SIZE(imx_rtc_resources), + .resource = imx_rtc_resources, +}; + +static struct resource imx_kpp_resources[] = { + { + .start = MX3x_KPP_BASE_ADDR, + .end = MX3x_KPP_BASE_ADDR + 0xf, + .flags = IORESOURCE_MEM + }, { + .start = MX3x_INT_KPP, + .end = MX3x_INT_KPP, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device imx_kpp_device = { + .name = "imx-keypad", + .id = -1, + .num_resources = ARRAY_SIZE(imx_kpp_resources), + .resource = imx_kpp_resources, +}; + static int __init mx3_devices_init(void) { if (cpu_is_mx31()) { diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index 4f77eb501274..2c3c8646a29e 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -27,3 +27,5 @@ extern struct platform_device imx_ssi_device0; extern struct platform_device imx_ssi_device1; extern struct platform_device imx_ssi_device1; extern struct platform_device imx_wdt_device0; +extern struct platform_device imx_rtc_device0; +extern struct platform_device imx_kpp_device; diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index f54af1e29ca4..58e57291b79d 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -16,6 +16,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/delay.h> #include <linux/types.h> #include <linux/init.h> #include <linux/clk.h> @@ -26,6 +27,8 @@ #include <linux/mfd/mc13783.h> #include <linux/spi/spi.h> #include <linux/regulator/machine.h> +#include <linux/fsl_devices.h> +#include <linux/input/matrix_keypad.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -65,6 +68,50 @@ static int mx31_3ds_pins[] = { MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */ /* MC13783 IRQ */ IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), + /* USB OTG reset */ + IOMUX_MODE(MX31_PIN_USB_PWR, IOMUX_CONFIG_GPIO), + /* USB OTG */ + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, + MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, + MX31_PIN_USBOTG_STP__USBOTG_STP, + /*Keyboard*/ + MX31_PIN_KEY_ROW0_KEY_ROW0, + MX31_PIN_KEY_ROW1_KEY_ROW1, + MX31_PIN_KEY_ROW2_KEY_ROW2, + MX31_PIN_KEY_COL0_KEY_COL0, + MX31_PIN_KEY_COL1_KEY_COL1, + MX31_PIN_KEY_COL2_KEY_COL2, + MX31_PIN_KEY_COL3_KEY_COL3, +}; + +/* + * Matrix keyboard + */ + +static const uint32_t mx31_3ds_keymap[] = { + KEY(0, 0, KEY_UP), + KEY(0, 1, KEY_DOWN), + KEY(1, 0, KEY_RIGHT), + KEY(1, 1, KEY_LEFT), + KEY(1, 2, KEY_ENTER), + KEY(2, 0, KEY_F6), + KEY(2, 1, KEY_F8), + KEY(2, 2, KEY_F9), + KEY(2, 3, KEY_F10), +}; + +static struct matrix_keymap_data mx31_3ds_keymap_data = { + .keymap = mx31_3ds_keymap, + .keymap_size = ARRAY_SIZE(mx31_3ds_keymap), }; /* Regulators */ @@ -126,6 +173,41 @@ static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = { #endif }; +/* + * USB OTG + */ + +#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + +#define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR) + +static void mx31_3ds_usbotg_init(void) +{ + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); + + gpio_request(USBOTG_RST_B, "otgusb-reset"); + gpio_direction_output(USBOTG_RST_B, 0); + mdelay(1); + gpio_set_value(USBOTG_RST_B, 1); +} + +static struct fsl_usb2_platform_data usbotg_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -315,6 +397,11 @@ static void __init mxc_board_init(void) spi_register_board_info(mx31_3ds_spi_devs, ARRAY_SIZE(mx31_3ds_spi_devs)); + mxc_register_device(&imx_kpp_device, &mx31_3ds_keymap_data); + + mx31_3ds_usbotg_init(); + mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata); + if (!mx31_3ds_init_expio()) platform_device_register(&smsc911x_device); } diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c index 80847b04c063..d3d5877c750e 100644 --- a/arch/arm/mach-mx3/mach-mx31lilly.c +++ b/arch/arm/mach-mx3/mach-mx31lilly.c @@ -27,12 +27,15 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/clk.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/smsc911x.h> #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/mfd/mc13783.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -44,6 +47,8 @@ #include <mach/iomux-mx3.h> #include <mach/board-mx31lilly.h> #include <mach/spi.h> +#include <mach/mxc_ehci.h> +#include <mach/ulpi.h> #include "devices.h" @@ -108,6 +113,137 @@ static struct platform_device physmap_flash_device = { .num_resources = 1, }; +/* USB */ + +#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + +static int usbotg_init(struct platform_device *pdev) +{ + unsigned int pins[] = { + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, + MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, + MX31_PIN_USBOTG_STP__USBOTG_STP, + }; + + mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB OTG"); + + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); + + mxc_iomux_set_gpr(MUX_PGP_USB_4WIRE, true); + mxc_iomux_set_gpr(MUX_PGP_USB_COMMON, true); + + /* chip select */ + mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE2, IOMUX_CONFIG_GPIO), + "USBOTG_CS"); + gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), "USBH1 CS"); + gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), 0); + + return 0; +} + +static int usbh1_init(struct platform_device *pdev) +{ + int pins[] = { + MX31_PIN_CSPI1_MOSI__USBH1_RXDM, + MX31_PIN_CSPI1_MISO__USBH1_RXDP, + MX31_PIN_CSPI1_SS0__USBH1_TXDM, + MX31_PIN_CSPI1_SS1__USBH1_TXDP, + MX31_PIN_CSPI1_SS2__USBH1_RCV, + MX31_PIN_CSPI1_SCLK__USBH1_OEB, + MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, + }; + + mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H1"); + + mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG); + + mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true); + + return 0; +} + +static int usbh2_init(struct platform_device *pdev) +{ + int pins[] = { + MX31_PIN_USBH2_DATA0__USBH2_DATA0, + MX31_PIN_USBH2_DATA1__USBH2_DATA1, + MX31_PIN_USBH2_CLK__USBH2_CLK, + MX31_PIN_USBH2_DIR__USBH2_DIR, + MX31_PIN_USBH2_NXT__USBH2_NXT, + MX31_PIN_USBH2_STP__USBH2_STP, + }; + + mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2"); + + mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG); + + mxc_iomux_set_gpr(MUX_PGP_UH2, true); + + /* chip select */ + mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO), + "USBH2_CS"); + gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS"); + gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0); + + return 0; +} + +static struct mxc_usbh_platform_data usbotg_pdata = { + .init = usbotg_init, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, + .flags = MXC_EHCI_POWER_PINS_ENABLED, +}; + +static struct mxc_usbh_platform_data usbh1_pdata = { + .init = usbh1_init, + .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL, + .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI, +}; + +static struct mxc_usbh_platform_data usbh2_pdata = { + .init = usbh2_init, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, + .flags = MXC_EHCI_POWER_PINS_ENABLED, +}; + static struct platform_device *devices[] __initdata = { &smsc91x_device, &physmap_flash_device, @@ -183,6 +319,15 @@ static void __init mx31lilly_board_init(void) spi_register_board_info(&mc13783_dev, 1); platform_add_devices(devices, ARRAY_SIZE(devices)); + + /* USB */ + usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_usbh1, &usbh1_pdata); + mxc_register_device(&mxc_usbh2, &usbh2_pdata); } static void __init mx31lilly_timer_init(void) diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c index fccb9207b78d..33a8d35498a7 100644 --- a/arch/arm/mach-mx3/mach-mx31moboard.c +++ b/arch/arm/mach-mx3/mach-mx31moboard.c @@ -18,7 +18,6 @@ #include <linux/delay.h> #include <linux/dma-mapping.h> -#include <linux/fsl_devices.h> #include <linux/gfp.h> #include <linux/gpio.h> #include <linux/init.h> @@ -306,84 +305,56 @@ static struct imxmmc_platform_data sdhc1_pdata = { * this pin is dedicated for all mx31moboard systems, so we do it here */ #define USB_RESET_B IOMUX_TO_GPIO(MX31_PIN_GPIO1_0) - -static void usb_xcvr_reset(void) -{ - gpio_request(USB_RESET_B, "usb-reset"); - gpio_direction_output(USB_RESET_B, 0); - mdelay(1); - gpio_set_value(USB_RESET_B, 1); -} - #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + PAD_CTL_ODE_CMOS) #define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC) - -static void moboard_usbotg_init(void) -{ - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); - - gpio_request(OTG_EN_B, "usb-udc-en"); - gpio_direction_output(OTG_EN_B, 0); -} - -static struct fsl_usb2_platform_data usb_pdata = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_ULPI, -}; - -#if defined(CONFIG_USB_ULPI) - #define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6) -static int moboard_usbh2_hw_init(struct platform_device *pdev) +static void usb_xcvr_reset(void) { - int ret; + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG | PAD_CTL_100K_PU); mxc_iomux_set_gpr(MUX_PGP_UH2, true); + mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG | PAD_CTL_100K_PU); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG | PAD_CTL_100K_PD); + mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG); - mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG); - - ret = gpio_request(USBH2_EN_B, "usbh2-en"); - if (ret) - return ret; + gpio_request(OTG_EN_B, "usb-udc-en"); + gpio_direction_output(OTG_EN_B, 0); + gpio_request(USBH2_EN_B, "usbh2-en"); gpio_direction_output(USBH2_EN_B, 0); - return 0; + gpio_request(USB_RESET_B, "usb-reset"); + gpio_direction_output(USB_RESET_B, 0); + mdelay(1); + gpio_set_value(USB_RESET_B, 1); + mdelay(1); } -static int moboard_usbh2_hw_exit(struct platform_device *pdev) -{ - gpio_free(USBH2_EN_B); - return 0; -} +#if defined(CONFIG_USB_ULPI) static struct mxc_usbh_platform_data usbh2_pdata = { - .init = moboard_usbh2_hw_init, - .exit = moboard_usbh2_hw_exit, .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, .flags = MXC_EHCI_POWER_PINS_ENABLED, }; @@ -508,8 +479,6 @@ static void __init mxc_board_init(void) usb_xcvr_reset(); - moboard_usbotg_init(); - mxc_register_device(&mxc_otg_udc_device, &usb_pdata); moboard_usbh2_init(); switch (mx31moboard_baseboard) { @@ -522,7 +491,8 @@ static void __init mxc_board_init(void) mx31moboard_marxbot_init(); break; case MX31SMARTBOT: - mx31moboard_smartbot_init(); + case MX31EYEBOT: + mx31moboard_smartbot_init(mx31moboard_baseboard); break; default: printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c index 78ecd751549b..cce410662383 100644 --- a/arch/arm/mach-mx3/mach-pcm037.c +++ b/arch/arm/mach-mx3/mach-pcm037.c @@ -449,6 +449,7 @@ static int __init pcm037_camera_alloc_dma(const size_t buf_size) static struct platform_device *devices[] __initdata = { &pcm037_flash, &pcm037_sram_device, + &imx_wdt_device0, &pcm037_mt9t031, &pcm037_mt9v022, }; diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index 1bf1ec2eef5e..78d9185a9d4b 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -150,6 +150,7 @@ static struct i2c_board_info pcm043_i2c_devices[] = { static struct platform_device *devices[] __initdata = { &pcm043_flash, &mxc_fec_device, + &imx_wdt_device0, }; static struct pad_desc pcm043_pads[] = { diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c index 093c595ca581..5f05bfbec380 100644 --- a/arch/arm/mach-mx3/mx31lite-db.c +++ b/arch/arm/mach-mx3/mx31lite-db.c @@ -206,5 +206,6 @@ void __init mx31lite_db_init(void) mxc_register_device(&mxc_spi_device0, &spi0_pdata); platform_device_register(&litekit_led_device); mxc_register_device(&imx_wdt_device0, NULL); + mxc_register_device(&imx_rtc_device0, NULL); } diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 11b906ce7eae..582299cb2c08 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -22,6 +22,7 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/types.h> +#include <linux/fsl_devices.h> #include <linux/usb/otg.h> @@ -213,6 +214,12 @@ static int __init devboard_usbh1_init(void) return mxc_register_device(&mxc_usbh1, &usbh1_pdata); } + +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + /* * system init for baseboard usage. Will be called by mx31moboard init. */ @@ -229,5 +236,7 @@ void __init mx31moboard_devboard_init(void) devboard_init_sel_gpios(); + mxc_register_device(&mxc_otg_udc_device, &usb_pdata); + devboard_usbh1_init(); } diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index ffb105e14d88..4930f8c27e66 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -25,6 +25,7 @@ #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/types.h> +#include <linux/fsl_devices.h> #include <linux/usb/otg.h> @@ -329,6 +330,11 @@ static int __init marxbot_usbh1_init(void) return mxc_register_device(&mxc_usbh1, &usbh1_pdata); } +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + /* * system init for baseboard usage. Will be called by mx31moboard init. */ @@ -356,5 +362,7 @@ void __init mx31moboard_marxbot_init(void) gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0)); gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false); + mxc_register_device(&mxc_otg_udc_device, &usb_pdata); + marxbot_usbh1_init(); } diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c index 52a69fc8b14f..293eea6d9d97 100644 --- a/arch/arm/mach-mx3/mx31moboard-smartbot.c +++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c @@ -23,11 +23,18 @@ #include <linux/i2c.h> #include <linux/platform_device.h> #include <linux/types.h> +#include <linux/fsl_devices.h> + +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> #include <mach/common.h> #include <mach/hardware.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> +#include <mach/board-mx31moboard.h> +#include <mach/mxc_ehci.h> +#include <mach/ulpi.h> #include <media/soc_camera.h> @@ -116,10 +123,33 @@ static int __init smartbot_cam_init(void) return 0; } +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_ULPI, +}; + +#if defined(CONFIG_USB_ULPI) + +static struct mxc_usbh_platform_data otg_host_pdata = { + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, + .flags = MXC_EHCI_POWER_PINS_ENABLED, +}; + +static int __init smartbot_otg_host_init(void) +{ + otg_host_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + return mxc_register_device(&mxc_otg_host, &otg_host_pdata); +} +#else +static inline int smartbot_otg_host_init(void) { return 0; } +#endif + #define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1) #define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1) #define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1) -#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) +#define TRSLAT_SRC_CHOICE IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1) static void smartbot_resets_init(void) { @@ -138,15 +168,15 @@ static void smartbot_resets_init(void) gpio_export(TRSLAT_RST_B, false); } - if (!gpio_request(SEL3, "sel3")) { - gpio_direction_input(SEL3); - gpio_export(SEL3, true); + if (!gpio_request(TRSLAT_SRC_CHOICE, "translator-src-choice")) { + gpio_direction_output(TRSLAT_SRC_CHOICE, 0); + gpio_export(TRSLAT_SRC_CHOICE, false); } } /* * system init for baseboard usage. Will be called by mx31moboard init. */ -void __init mx31moboard_smartbot_init(void) +void __init mx31moboard_smartbot_init(int board) { printk(KERN_INFO "Initializing mx31smartbot peripherals\n"); @@ -155,6 +185,19 @@ void __init mx31moboard_smartbot_init(void) mxc_register_device(&mxc_uart_device1, &uart_pdata); + + switch (board) { + case MX31SMARTBOT: + mxc_register_device(&mxc_otg_udc_device, &usb_pdata); + break; + case MX31EYEBOT: + smartbot_otg_host_init(); + break; + default: + printk(KERN_WARNING "Unknown board %d, USB OTG not initialized", + board); + } + smartbot_resets_init(); smartbot_cam_init(); diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index ee67a71db80d..ed885f9d7b73 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -12,11 +12,16 @@ #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/fsl_devices.h> #include <mach/common.h> #include <mach/hardware.h> #include <mach/imx-uart.h> #include <mach/iomux-mx51.h> +#include <mach/mxc_ehci.h> #include <asm/irq.h> #include <asm/setup.h> @@ -26,6 +31,18 @@ #include "devices.h" +#define BABBAGE_USB_HUB_RESET (0*32 + 7) /* GPIO_1_7 */ +#define BABBAGE_USBH1_STP (0*32 + 27) /* GPIO_1_27 */ +#define BABBAGE_PHY_RESET (1*32 +5) /* GPIO_2_5 */ + +/* USB_CTRL_1 */ +#define MX51_USB_CTRL_1_OFFSET 0x10 +#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) + +#define MX51_USB_PLLDIV_12_MHZ 0x00 +#define MX51_USB_PLL_DIV_19_2_MHZ 0x01 +#define MX51_USB_PLL_DIV_24_MHZ 0x02 + static struct platform_device *devices[] __initdata = { &mxc_fec_device, }; @@ -46,6 +63,22 @@ static struct pad_desc mx51babbage_pads[] = { MX51_PAD_EIM_D26__UART3_TXD, MX51_PAD_EIM_D27__UART3_RTS, MX51_PAD_EIM_D24__UART3_CTS, + + /* USB HOST1 */ + MX51_PAD_USBH1_CLK__USBH1_CLK, + MX51_PAD_USBH1_DIR__USBH1_DIR, + MX51_PAD_USBH1_NXT__USBH1_NXT, + MX51_PAD_USBH1_DATA0__USBH1_DATA0, + MX51_PAD_USBH1_DATA1__USBH1_DATA1, + MX51_PAD_USBH1_DATA2__USBH1_DATA2, + MX51_PAD_USBH1_DATA3__USBH1_DATA3, + MX51_PAD_USBH1_DATA4__USBH1_DATA4, + MX51_PAD_USBH1_DATA5__USBH1_DATA5, + MX51_PAD_USBH1_DATA6__USBH1_DATA6, + MX51_PAD_USBH1_DATA7__USBH1_DATA7, + + /* USB HUB reset line*/ + MX51_PAD_GPIO_1_7__GPIO1_7, }; /* Serial ports */ @@ -66,15 +99,149 @@ static inline void mxc_init_imx_uart(void) } #endif /* SERIAL_IMX */ +static int gpio_usbh1_active(void) +{ + struct pad_desc usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO_1_27; + struct pad_desc phyreset_gpio = MX51_PAD_EIM_D21__GPIO_2_5; + int ret; + + /* Set USBH1_STP to GPIO and toggle it */ + mxc_iomux_v3_setup_pad(&usbh1stp_gpio); + ret = gpio_request(BABBAGE_USBH1_STP, "usbh1_stp"); + + if (ret) { + pr_debug("failed to get MX51_PAD_USBH1_STP__GPIO_1_27: %d\n", ret); + return ret; + } + gpio_direction_output(BABBAGE_USBH1_STP, 0); + gpio_set_value(BABBAGE_USBH1_STP, 1); + msleep(100); + gpio_free(BABBAGE_USBH1_STP); + + /* De-assert USB PHY RESETB */ + mxc_iomux_v3_setup_pad(&phyreset_gpio); + ret = gpio_request(BABBAGE_PHY_RESET, "phy_reset"); + + if (ret) { + pr_debug("failed to get MX51_PAD_EIM_D21__GPIO_2_5: %d\n", ret); + return ret; + } + gpio_direction_output(BABBAGE_PHY_RESET, 1); + return 0; +} + +static inline void babbage_usbhub_reset(void) +{ + int ret; + + /* Bring USB hub out of reset */ + ret = gpio_request(BABBAGE_USB_HUB_RESET, "GPIO1_7"); + if (ret) { + printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret); + return; + } + gpio_direction_output(BABBAGE_USB_HUB_RESET, 0); + + /* USB HUB RESET - De-assert USB HUB RESET_N */ + msleep(1); + gpio_set_value(BABBAGE_USB_HUB_RESET, 0); + msleep(1); + gpio_set_value(BABBAGE_USB_HUB_RESET, 1); +} + +/* This function is board specific as the bit mask for the plldiv will also +be different for other Freescale SoCs, thus a common bitmask is not +possible and cannot get place in /plat-mxc/ehci.c.*/ +static int initialize_otg_port(struct platform_device *pdev) +{ + u32 v; + void __iomem *usb_base; + u32 usbother_base; + + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; + + /* Set the PHY clock to 19.2MHz */ + v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; + v |= MX51_USB_PLL_DIV_19_2_MHZ; + __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + iounmap(usb_base); + return 0; +} + +static int initialize_usbh1_port(struct platform_device *pdev) +{ + u32 v; + void __iomem *usb_base; + u32 usbother_base; + + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; + + /* The clock for the USBH1 ULPI port will come externally from the PHY. */ + v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET); + __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET); + iounmap(usb_base); + return 0; +} + +static struct mxc_usbh_platform_data dr_utmi_config = { + .init = initialize_otg_port, + .portsc = MXC_EHCI_UTMI_16BIT, + .flags = MXC_EHCI_INTERNAL_PHY, +}; + +static struct fsl_usb2_platform_data usb_pdata = { + .operating_mode = FSL_USB2_DR_DEVICE, + .phy_mode = FSL_USB2_PHY_UTMI_WIDE, +}; + +static struct mxc_usbh_platform_data usbh1_config = { + .init = initialize_usbh1_port, + .portsc = MXC_EHCI_MODE_ULPI, + .flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD), +}; + +static int otg_mode_host; + +static int __init babbage_otg_mode(char *options) +{ + if (!strcmp(options, "host")) + otg_mode_host = 1; + else if (!strcmp(options, "device")) + otg_mode_host = 0; + else + pr_info("otg_mode neither \"host\" nor \"device\". " + "Defaulting to device\n"); + return 0; +} +__setup("otg_mode=", babbage_otg_mode); + /* * Board specific initialization. */ static void __init mxc_board_init(void) { + struct pad_desc usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; + mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads, ARRAY_SIZE(mx51babbage_pads)); mxc_init_imx_uart(); platform_add_devices(devices, ARRAY_SIZE(devices)); + + if (otg_mode_host) + mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); + else { + initialize_otg_port(NULL); + mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata); + } + + gpio_usbh1_active(); + mxc_register_device(&mxc_usbh1_device, &usbh1_config); + /* setback USBH1_STP to be function */ + mxc_iomux_v3_setup_pad(&usbh1stp); + babbage_usbhub_reset(); } static void __init mx51_babbage_timer_init(void) diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c index 1ee6ce4087b8..d9f612d3370e 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -37,6 +37,7 @@ static struct clk lp_apm_clk; static struct clk periph_apm_clk; static struct clk ahb_clk; static struct clk ipg_clk; +static struct clk usboh3_clk; #define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */ @@ -570,6 +571,35 @@ static int _clk_uart_set_parent(struct clk *clk, struct clk *parent) return 0; } +static unsigned long clk_usboh3_get_rate(struct clk *clk) +{ + u32 reg, prediv, podf; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + reg = __raw_readl(MXC_CCM_CSCDR1); + prediv = ((reg & MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK) >> + MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET) + 1; + podf = ((reg & MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK) >> + MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET) + 1; + + return parent_rate / (prediv * podf); +} + +static int _clk_usboh3_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk, + &lp_apm_clk); + reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK; + reg |= mux << MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET; + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + static unsigned long get_high_reference_clock_rate(struct clk *clk) { return external_high_reference; @@ -691,6 +721,12 @@ static struct clk uart_root_clk = { .set_parent = _clk_uart_set_parent, }; +static struct clk usboh3_clk = { + .parent = &pll2_sw_clk, + .get_rate = clk_usboh3_get_rate, + .set_parent = _clk_usboh3_set_parent, +}; + static struct clk ahb_max_clk = { .parent = &ahb_clk, .enable_reg = MXC_CCM_CCGR0, @@ -779,6 +815,12 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) _REGISTER_CLOCK(NULL, "gpt", gpt_clk) _REGISTER_CLOCK("fec.0", NULL, fec_clk) + _REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk) + _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk) + _REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk) + _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk) + _REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk) + _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk) }; static void clk_tree_init(void) @@ -819,6 +861,9 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc, clk_enable(&cpu_clk); clk_enable(&main_bus_clk); + /* set the usboh3_clk parent to pll2_sw_clk */ + clk_set_parent(&usboh3_clk, &pll2_sw_clk); + /* System timer */ mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_MXC_INT_GPT); diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c index d6fd3961ade9..7130449aacdc 100644 --- a/arch/arm/mach-mx5/devices.c +++ b/arch/arm/mach-mx5/devices.c @@ -1,5 +1,6 @@ /* * Copyright 2009 Amit Kucheria <amit.kucheria@canonical.com> + * Copyright (C) 2010 Freescale Semiconductor, Inc. * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License @@ -10,8 +11,11 @@ */ #include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <mach/hardware.h> #include <mach/imx-uart.h> +#include <mach/irqs.h> static struct resource uart0[] = { { @@ -89,8 +93,109 @@ struct platform_device mxc_fec_device = { .resource = mxc_fec_resources, }; -/* Dummy definition to allow compiling in AVIC and TZIC simultaneously */ +static u64 usb_dma_mask = DMA_BIT_MASK(32); + +static struct resource usbotg_resources[] = { + { + .start = MX51_OTG_BASE_ADDR, + .end = MX51_OTG_BASE_ADDR + 0x1ff, + .flags = IORESOURCE_MEM, + }, + { + .start = MX51_MXC_INT_USB_OTG, + .flags = IORESOURCE_IRQ, + }, +}; + +/* OTG gadget device */ +struct platform_device mxc_usbdr_udc_device = { + .name = "fsl-usb2-udc", + .id = -1, + .num_resources = ARRAY_SIZE(usbotg_resources), + .resource = usbotg_resources, + .dev = { + .dma_mask = &usb_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct platform_device mxc_usbdr_host_device = { + .name = "mxc-ehci", + .id = 0, + .num_resources = ARRAY_SIZE(usbotg_resources), + .resource = usbotg_resources, + .dev = { + .dma_mask = &usb_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource usbh1_resources[] = { + { + .start = MX51_OTG_BASE_ADDR + 0x200, + .end = MX51_OTG_BASE_ADDR + 0x200 + 0x1ff, + .flags = IORESOURCE_MEM, + }, + { + .start = MX51_MXC_INT_USB_H1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device mxc_usbh1_device = { + .name = "mxc-ehci", + .id = 1, + .num_resources = ARRAY_SIZE(usbh1_resources), + .resource = usbh1_resources, + .dev = { + .dma_mask = &usb_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource mxc_wdt_resources[] = { + { + .start = MX51_WDOG_BASE_ADDR, + .end = MX51_WDOG_BASE_ADDR + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device mxc_wdt = { + .name = "imx2-wdt", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_wdt_resources), + .resource = mxc_wdt_resources, +}; + +static struct mxc_gpio_port mxc_gpio_ports[] = { + { + .chip.label = "gpio-0", + .base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR), + .irq = MX51_MXC_INT_GPIO1_LOW, + .virtual_irq_start = MXC_GPIO_IRQ_START + }, + { + .chip.label = "gpio-1", + .base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR), + .irq = MX51_MXC_INT_GPIO2_LOW, + .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1 + }, + { + .chip.label = "gpio-2", + .base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR), + .irq = MX51_MXC_INT_GPIO3_LOW, + .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2 + }, + { + .chip.label = "gpio-3", + .base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR), + .irq = MX51_MXC_INT_GPIO4_LOW, + .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3 + }, +}; + int __init mxc_register_gpios(void) { - return 0; + return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports)); } diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h index f339ab8c19be..c879ae71cd5b 100644 --- a/arch/arm/mach-mx5/devices.h +++ b/arch/arm/mach-mx5/devices.h @@ -2,3 +2,7 @@ extern struct platform_device mxc_uart_device0; extern struct platform_device mxc_uart_device1; extern struct platform_device mxc_uart_device2; extern struct platform_device mxc_fec_device; +extern struct platform_device mxc_usbdr_host_device; +extern struct platform_device mxc_usbh1_device; +extern struct platform_device mxc_usbdr_udc_device; +extern struct platform_device mxc_wdt; diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c index 60f5bee09f2e..2c471fc451d7 100644 --- a/arch/arm/mach-nomadik/clock.c +++ b/arch/arm/mach-nomadik/clock.c @@ -56,6 +56,7 @@ static struct clk_lookup lookups[] = { CLK(&clk_default, "gpio.1"), CLK(&clk_default, "gpio.2"), CLK(&clk_default, "gpio.3"), + CLK(&clk_default, "rng"), }; static int __init clk_init(void) diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 27f489747bbd..b18d7c28ab7a 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -152,6 +152,16 @@ config MACH_AMS_DELTA Support for the Amstrad E3 (codename Delta) videophone. Say Y here if you have such a device. +config AMS_DELTA_FIQ + bool "Fast Interrupt Request (FIQ) support for the E3" + depends on MACH_AMS_DELTA + select FIQ + help + Provide a FIQ handler for the E3. + This allows for fast handling of interrupts generated + by the clock line of the E3 mailboard (or a PS/2 keyboard) + connected to the GPIO based external keyboard port. + config MACH_OMAP_GENERIC bool "Generic OMAP board" depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index b6a537c875b8..ea231c7a550a 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o +obj-$(CONFIG_AMS_DELTA_FIQ) += ams-delta-fiq.o ams-delta-fiq-handler.o obj-$(CONFIG_MACH_SX1) += board-sx1.o board-sx1-mmc.o obj-$(CONFIG_MACH_HERALD) += board-htcherald.o diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S new file mode 100644 index 000000000000..927d5a181760 --- /dev/null +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -0,0 +1,278 @@ +/* + * linux/arch/arm/mach-omap1/ams-delta-fiq-handler.S + * + * Based on linux/arch/arm/lib/floppydma.S + * Renamed and modified to work with 2.6 kernel by Matt Callow + * Copyright (C) 1995, 1996 Russell King + * Copyright (C) 2004 Pete Trapps + * Copyright (C) 2006 Matt Callow + * Copyright (C) 2010 Janusz Krzysztofik + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +#include <linux/linkage.h> + +#include <plat/io.h> +#include <plat/board-ams-delta.h> + +#include <mach/ams-delta-fiq.h> + +/* + * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c. + * Unfortunately, those were not placed in a separate header file. + */ +#define OMAP1510_GPIO_BASE 0xFFFCE000 +#define OMAP1510_GPIO_DATA_INPUT 0x00 +#define OMAP1510_GPIO_DATA_OUTPUT 0x04 +#define OMAP1510_GPIO_DIR_CONTROL 0x08 +#define OMAP1510_GPIO_INT_CONTROL 0x0c +#define OMAP1510_GPIO_INT_MASK 0x10 +#define OMAP1510_GPIO_INT_STATUS 0x14 +#define OMAP1510_GPIO_PIN_CONTROL 0x18 + +/* GPIO register bitmasks */ +#define KEYBRD_DATA_MASK (0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_DATA) +#define KEYBRD_CLK_MASK (0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_CLK) +#define MODEM_IRQ_MASK (0x1 << AMS_DELTA_GPIO_PIN_MODEM_IRQ) +#define HOOK_SWITCH_MASK (0x1 << AMS_DELTA_GPIO_PIN_HOOK_SWITCH) +#define OTHERS_MASK (MODEM_IRQ_MASK | HOOK_SWITCH_MASK) + +/* IRQ handler register bitmasks */ +#define DEFERRED_FIQ_MASK (0x1 << (INT_DEFERRED_FIQ % IH2_BASE)) +#define GPIO_BANK1_MASK (0x1 << INT_GPIO_BANK1) + +/* Driver buffer byte offsets */ +#define BUF_MASK (FIQ_MASK * 4) +#define BUF_STATE (FIQ_STATE * 4) +#define BUF_KEYS_CNT (FIQ_KEYS_CNT * 4) +#define BUF_TAIL_OFFSET (FIQ_TAIL_OFFSET * 4) +#define BUF_HEAD_OFFSET (FIQ_HEAD_OFFSET * 4) +#define BUF_BUF_LEN (FIQ_BUF_LEN * 4) +#define BUF_KEY (FIQ_KEY * 4) +#define BUF_MISSED_KEYS (FIQ_MISSED_KEYS * 4) +#define BUF_BUFFER_START (FIQ_BUFFER_START * 4) +#define BUF_GPIO_INT_MASK (FIQ_GPIO_INT_MASK * 4) +#define BUF_KEYS_HICNT (FIQ_KEYS_HICNT * 4) +#define BUF_IRQ_PEND (FIQ_IRQ_PEND * 4) +#define BUF_SIR_CODE_L1 (FIQ_SIR_CODE_L1 * 4) +#define BUF_SIR_CODE_L2 (IRQ_SIR_CODE_L2 * 4) +#define BUF_CNT_INT_00 (FIQ_CNT_INT_00 * 4) +#define BUF_CNT_INT_KEY (FIQ_CNT_INT_KEY * 4) +#define BUF_CNT_INT_MDM (FIQ_CNT_INT_MDM * 4) +#define BUF_CNT_INT_03 (FIQ_CNT_INT_03 * 4) +#define BUF_CNT_INT_HSW (FIQ_CNT_INT_HSW * 4) +#define BUF_CNT_INT_05 (FIQ_CNT_INT_05 * 4) +#define BUF_CNT_INT_06 (FIQ_CNT_INT_06 * 4) +#define BUF_CNT_INT_07 (FIQ_CNT_INT_07 * 4) +#define BUF_CNT_INT_08 (FIQ_CNT_INT_08 * 4) +#define BUF_CNT_INT_09 (FIQ_CNT_INT_09 * 4) +#define BUF_CNT_INT_10 (FIQ_CNT_INT_10 * 4) +#define BUF_CNT_INT_11 (FIQ_CNT_INT_11 * 4) +#define BUF_CNT_INT_12 (FIQ_CNT_INT_12 * 4) +#define BUF_CNT_INT_13 (FIQ_CNT_INT_13 * 4) +#define BUF_CNT_INT_14 (FIQ_CNT_INT_14 * 4) +#define BUF_CNT_INT_15 (FIQ_CNT_INT_15 * 4) +#define BUF_CIRC_BUFF (FIQ_CIRC_BUFF * 4) + + +/* + * Register useage + * r8 - temporary + * r9 - the driver buffer + * r10 - temporary + * r11 - interrupts mask + * r12 - base pointers + * r13 - interrupts status + */ + + .text + + .global qwerty_fiqin_end + +ENTRY(qwerty_fiqin_start) + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + @ FIQ intrrupt handler + ldr r12, omap_ih1_base @ set pointer to level1 handler + + ldr r11, [r12, #IRQ_MIR_REG_OFFSET] @ fetch interrupts mask + + ldr r13, [r12, #IRQ_ITR_REG_OFFSET] @ fetch interrupts status + bics r13, r13, r11 @ clear masked - any left? + beq exit @ none - spurious FIQ? exit + + ldr r10, [r12, #IRQ_SIR_FIQ_REG_OFFSET] @ get requested interrupt number + + mov r8, #2 @ reset FIQ agreement + str r8, [r12, #IRQ_CONTROL_REG_OFFSET] + + cmp r10, #INT_GPIO_BANK1 @ is it GPIO bank interrupt? + beq gpio @ yes - process it + + mov r8, #1 + orr r8, r11, r8, lsl r10 @ mask spurious interrupt + str r8, [r12, #IRQ_MIR_REG_OFFSET] +exit: + subs pc, lr, #4 @ return from FIQ + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + + + @@@@@@@@@@@@@@@@@@@@@@@@@@@ +gpio: @ GPIO bank interrupt handler + ldr r12, omap1510_gpio_base @ set base pointer to GPIO bank + + ldr r11, [r12, #OMAP1510_GPIO_INT_MASK] @ fetch GPIO interrupts mask +restart: + ldr r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ fetch status bits + bics r13, r13, r11 @ clear masked - any left? + beq exit @ no - spurious interrupt? exit + + orr r11, r11, r13 @ mask all requested interrupts + str r11, [r12, #OMAP1510_GPIO_INT_MASK] + + ands r10, r13, #KEYBRD_CLK_MASK @ extract keyboard status - set? + beq hksw @ no - try next source + + + @@@@@@@@@@@@@@@@@@@@@@ + @ Keyboard clock FIQ mode interrupt handler + @ r10 now contains KEYBRD_CLK_MASK, use it + str r10, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack the interrupt + bic r11, r11, r10 @ unmask it + str r11, [r12, #OMAP1510_GPIO_INT_MASK] + + @ Process keyboard data + ldr r8, [r12, #OMAP1510_GPIO_DATA_INPUT] @ fetch GPIO input + + ldr r10, [r9, #BUF_STATE] @ fetch kbd interface state + cmp r10, #0 @ are we expecting start bit? + bne data @ no - go to data processing + + ands r8, r8, #KEYBRD_DATA_MASK @ check start bit - detected? + beq hksw @ no - try next source + + @ r8 contains KEYBRD_DATA_MASK, use it + str r8, [r9, #BUF_STATE] @ enter data processing state + @ r10 already contains 0, reuse it + str r10, [r9, #BUF_KEY] @ clear keycode + mov r10, #2 @ reset input bit mask + str r10, [r9, #BUF_MASK] + + @ Mask other GPIO line interrupts till key done + str r11, [r9, #BUF_GPIO_INT_MASK] @ save mask for later restore + mvn r11, #KEYBRD_CLK_MASK @ prepare all except kbd mask + str r11, [r12, #OMAP1510_GPIO_INT_MASK] @ store into the mask register + + b restart @ restart + +data: ldr r10, [r9, #BUF_MASK] @ fetch current input bit mask + + @ r8 still contains GPIO input bits + ands r8, r8, #KEYBRD_DATA_MASK @ is keyboard data line low? + ldreq r8, [r9, #BUF_KEY] @ yes - fetch collected so far, + orreq r8, r8, r10 @ set 1 at current mask position + streq r8, [r9, #BUF_KEY] @ and save back + + mov r10, r10, lsl #1 @ shift mask left + bics r10, r10, #0x800 @ have we got all the bits? + strne r10, [r9, #BUF_MASK] @ not yet - store the mask + bne restart @ and restart + + @ r10 already contains 0, reuse it + str r10, [r9, #BUF_STATE] @ reset state to start + + @ Key done - restore interrupt mask + ldr r10, [r9, #BUF_GPIO_INT_MASK] @ fetch saved mask + and r11, r11, r10 @ unmask all saved as unmasked + str r11, [r12, #OMAP1510_GPIO_INT_MASK] @ restore into the mask register + + @ Try appending the keycode to the circular buffer + ldr r10, [r9, #BUF_KEYS_CNT] @ get saved keystrokes count + ldr r8, [r9, #BUF_BUF_LEN] @ get buffer size + cmp r10, r8 @ is buffer full? + beq hksw @ yes - key lost, next source + + add r10, r10, #1 @ incremet keystrokes counter + str r10, [r9, #BUF_KEYS_CNT] + + ldr r10, [r9, #BUF_TAIL_OFFSET] @ get buffer tail offset + @ r8 already contains buffer size + cmp r10, r8 @ end of buffer? + moveq r10, #0 @ yes - rewind to buffer start + + ldr r12, [r9, #BUF_BUFFER_START] @ get buffer start address + add r12, r12, r10, LSL #2 @ calculate buffer tail address + ldr r8, [r9, #BUF_KEY] @ get last keycode + str r8, [r12] @ append it to the buffer tail + + add r10, r10, #1 @ increment buffer tail offset + str r10, [r9, #BUF_TAIL_OFFSET] + + ldr r10, [r9, #BUF_CNT_INT_KEY] @ increment interrupts counter + add r10, r10, #1 + str r10, [r9, #BUF_CNT_INT_KEY] + @@@@@@@@@@@@@@@@@@@@@@@@ + + +hksw: @Is hook switch interrupt requested? + tst r13, #HOOK_SWITCH_MASK @ is hook switch status bit set? + beq mdm @ no - try next source + + + @@@@@@@@@@@@@@@@@@@@@@@@ + @ Hook switch interrupt FIQ mode simple handler + + @ Don't toggle active edge, the switch always bounces + + @ Increment hook switch interrupt counter + ldr r10, [r9, #BUF_CNT_INT_HSW] + add r10, r10, #1 + str r10, [r9, #BUF_CNT_INT_HSW] + @@@@@@@@@@@@@@@@@@@@@@@@ + + +mdm: @Is it a modem interrupt? + tst r13, #MODEM_IRQ_MASK @ is modem status bit set? + beq irq @ no - check for next interrupt + + + @@@@@@@@@@@@@@@@@@@@@@@@ + @ Modem FIQ mode interrupt handler stub + + @ Increment modem interrupt counter + ldr r10, [r9, #BUF_CNT_INT_MDM] + add r10, r10, #1 + str r10, [r9, #BUF_CNT_INT_MDM] + @@@@@@@@@@@@@@@@@@@@@@@@ + + +irq: @ Place deferred_fiq interrupt request + ldr r12, deferred_fiq_ih_base @ set pointer to IRQ handler + mov r10, #DEFERRED_FIQ_MASK @ set deferred_fiq bit + str r10, [r12, #IRQ_ISR_REG_OFFSET] @ place it in the ISR register + + ldr r12, omap1510_gpio_base @ set pointer back to GPIO bank + b restart @ check for next GPIO interrupt + @@@@@@@@@@@@@@@@@@@@@@@@@@@ + + +/* + * Virtual addresses for IO + */ +omap_ih1_base: + .word OMAP1_IO_ADDRESS(OMAP_IH1_BASE) +deferred_fiq_ih_base: + .word OMAP1_IO_ADDRESS(DEFERRED_FIQ_IH_BASE) +omap1510_gpio_base: + .word OMAP1_IO_ADDRESS(OMAP1510_GPIO_BASE) +qwerty_fiqin_end: + +/* + * Check the size of the FIQ, + * it cannot go beyond 0xffff0200, and is copied to 0xffff001c + */ +.if (qwerty_fiqin_end - qwerty_fiqin_start) > (0x200 - 0x1c) + .err +.endif diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c new file mode 100644 index 000000000000..6c994e2d8879 --- /dev/null +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -0,0 +1,155 @@ +/* + * Amstrad E3 FIQ handling + * + * Copyright (C) 2009 Janusz Krzysztofik + * Copyright (c) 2006 Matt Callow + * Copyright (c) 2004 Amstrad Plc + * Copyright (C) 2001 RidgeRun, Inc. + * + * Parts of this code are taken from linux/arch/arm/mach-omap/irq.c + * in the MontaVista 2.4 kernel (and the Amstrad changes therein) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/io.h> + +#include <plat/board-ams-delta.h> + +#include <asm/fiq.h> +#include <mach/ams-delta-fiq.h> + +static struct fiq_handler fh = { + .name = "ams-delta-fiq" +}; + +/* + * This buffer is shared between FIQ and IRQ contexts. + * The FIQ and IRQ isrs can both read and write it. + * It is structured as a header section several 32bit slots, + * followed by the circular buffer where the FIQ isr stores + * keystrokes received from the qwerty keyboard. + * See ams-delta-fiq.h for details of offsets. + */ +unsigned int fiq_buffer[1024]; +EXPORT_SYMBOL(fiq_buffer); + +static unsigned int irq_counter[16]; + +static irqreturn_t deferred_fiq(int irq, void *dev_id) +{ + struct irq_desc *irq_desc; + struct irq_chip *irq_chip = NULL; + int gpio, irq_num, fiq_count; + + irq_desc = irq_to_desc(IH_GPIO_BASE); + if (irq_desc) + irq_chip = irq_desc->chip; + + /* + * For each handled GPIO interrupt, keep calling its interrupt handler + * until the IRQ counter catches the FIQ incremented interrupt counter. + */ + for (gpio = AMS_DELTA_GPIO_PIN_KEYBRD_CLK; + gpio <= AMS_DELTA_GPIO_PIN_HOOK_SWITCH; gpio++) { + irq_num = gpio_to_irq(gpio); + fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio]; + + while (irq_counter[gpio] < fiq_count) { + if (gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) { + /* + * It looks like handle_edge_irq() that + * OMAP GPIO edge interrupts default to, + * expects interrupt already unmasked. + */ + if (irq_chip && irq_chip->unmask) + irq_chip->unmask(irq_num); + } + generic_handle_irq(irq_num); + + irq_counter[gpio]++; + } + } + return IRQ_HANDLED; +} + +void __init ams_delta_init_fiq(void) +{ + void *fiqhandler_start; + unsigned int fiqhandler_length; + struct pt_regs FIQ_regs; + unsigned long val, offset; + int i, retval; + + fiqhandler_start = &qwerty_fiqin_start; + fiqhandler_length = &qwerty_fiqin_end - &qwerty_fiqin_start; + pr_info("Installing fiq handler from %p, length 0x%x\n", + fiqhandler_start, fiqhandler_length); + + retval = claim_fiq(&fh); + if (retval) { + pr_err("ams_delta_init_fiq(): couldn't claim FIQ, ret=%d\n", + retval); + return; + } + + retval = request_irq(INT_DEFERRED_FIQ, deferred_fiq, + IRQ_TYPE_EDGE_RISING, "deferred_fiq", 0); + if (retval < 0) { + pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval); + release_fiq(&fh); + return; + } + /* + * Since no set_type() method is provided by OMAP irq chip, + * switch to edge triggered interrupt type manually. + */ + offset = IRQ_ILR0_REG_OFFSET + INT_DEFERRED_FIQ * 0x4; + val = omap_readl(DEFERRED_FIQ_IH_BASE + offset) & ~(1 << 1); + omap_writel(val, DEFERRED_FIQ_IH_BASE + offset); + + set_fiq_handler(fiqhandler_start, fiqhandler_length); + + /* + * Initialise the buffer which is shared + * between FIQ mode and IRQ mode + */ + fiq_buffer[FIQ_GPIO_INT_MASK] = 0; + fiq_buffer[FIQ_MASK] = 0; + fiq_buffer[FIQ_STATE] = 0; + fiq_buffer[FIQ_KEY] = 0; + fiq_buffer[FIQ_KEYS_CNT] = 0; + fiq_buffer[FIQ_KEYS_HICNT] = 0; + fiq_buffer[FIQ_TAIL_OFFSET] = 0; + fiq_buffer[FIQ_HEAD_OFFSET] = 0; + fiq_buffer[FIQ_BUF_LEN] = 256; + fiq_buffer[FIQ_MISSED_KEYS] = 0; + fiq_buffer[FIQ_BUFFER_START] = + (unsigned int) &fiq_buffer[FIQ_CIRC_BUFF]; + + for (i = FIQ_CNT_INT_00; i <= FIQ_CNT_INT_15; i++) + fiq_buffer[i] = 0; + + /* + * FIQ mode r9 always points to the fiq_buffer, becauses the FIQ isr + * will run in an unpredictable context. The fiq_buffer is the FIQ isr's + * only means of communication with the IRQ level and other kernel + * context code. + */ + FIQ_regs.ARM_r9 = (unsigned int)fiq_buffer; + set_fiq_regs(&FIQ_regs); + + pr_info("request_fiq(): fiq_buffer = %p\n", fiq_buffer); + + /* + * Redirect GPIO interrupts to FIQ + */ + offset = IRQ_ILR0_REG_OFFSET + INT_GPIO_BANK1 * 0x4; + val = omap_readl(OMAP_IH1_BASE + offset) | 1; + omap_writel(val, OMAP_IH1_BASE + offset); +} diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 7fc11c34b696..fdd1dd53fa9c 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -33,6 +33,8 @@ #include <plat/board.h> #include <plat/common.h> +#include <mach/ams-delta-fiq.h> + static u8 ams_delta_latch1_reg; static u16 ams_delta_latch2_reg; @@ -236,6 +238,10 @@ static void __init ams_delta_init(void) omap_usb_init(&ams_delta_usb_config); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); +#ifdef CONFIG_AMS_DELTA_FIQ + ams_delta_init_fiq(); +#endif + omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); } @@ -263,8 +269,18 @@ static struct platform_device ams_delta_modem_device = { static int __init ams_delta_modem_init(void) { + int err; + omap_cfg_reg(M14_1510_GPIO2); - ams_delta_modem_ports[0].irq = gpio_to_irq(2); + ams_delta_modem_ports[0].irq = + gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ); + + err = gpio_request(AMS_DELTA_GPIO_PIN_MODEM_IRQ, "modem"); + if (err) { + pr_err("Couldn't request gpio pin for modem\n"); + return err; + } + gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ); ams_delta_latch2_write( AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC, diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index e0aec1007a0d..6bbb1b8b8294 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -578,7 +578,7 @@ int omap1_clk_set_rate(struct clk *clk, unsigned long rate) #ifdef CONFIG_OMAP_RESET_CLOCKS -void __init omap1_clk_disable_unused(struct clk *clk) +void omap1_clk_disable_unused(struct clk *clk) { __u32 regval32; diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index a4190afb8614..75d0d7d90bff 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -39,7 +39,7 @@ extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate); extern unsigned long omap1_watchdog_recalc(struct clk *clk); #ifdef CONFIG_OMAP_RESET_CLOCKS -extern void __init omap1_clk_disable_unused(struct clk *clk); +extern void omap1_clk_disable_unused(struct clk *clk); #else #define omap1_clk_disable_unused NULL #endif diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h new file mode 100644 index 000000000000..7a2df29400ca --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h @@ -0,0 +1,79 @@ +/* + * arch/arm/mach-omap1/include/ams-delta-fiq.h + * + * Taken from the original Amstrad modifications to fiq.h + * + * Copyright (c) 2004 Amstrad Plc + * Copyright (c) 2006 Matt Callow + * Copyright (c) 2010 Janusz Krzysztofik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __AMS_DELTA_FIQ_H +#define __AMS_DELTA_FIQ_H + +#include <plat/irqs.h> + +/* + * Interrupt number used for passing control from FIQ to IRQ. + * IRQ12, described as reserved, has been selected. + */ +#define INT_DEFERRED_FIQ INT_1510_RES12 +/* + * Base address of an interrupt handler that the INT_DEFERRED_FIQ belongs to. + */ +#if (INT_DEFERRED_FIQ < IH2_BASE) +#define DEFERRED_FIQ_IH_BASE OMAP_IH1_BASE +#else +#define DEFERRED_FIQ_IH_BASE OMAP_IH2_BASE +#endif + +/* + * These are the offsets from the begining of the fiq_buffer. They are put here + * since the buffer and header need to be accessed by drivers servicing devices + * which generate GPIO interrupts - e.g. keyboard, modem, hook switch. + */ +#define FIQ_MASK 0 +#define FIQ_STATE 1 +#define FIQ_KEYS_CNT 2 +#define FIQ_TAIL_OFFSET 3 +#define FIQ_HEAD_OFFSET 4 +#define FIQ_BUF_LEN 5 +#define FIQ_KEY 6 +#define FIQ_MISSED_KEYS 7 +#define FIQ_BUFFER_START 8 +#define FIQ_GPIO_INT_MASK 9 +#define FIQ_KEYS_HICNT 10 +#define FIQ_IRQ_PEND 11 +#define FIQ_SIR_CODE_L1 12 +#define IRQ_SIR_CODE_L2 13 + +#define FIQ_CNT_INT_00 14 +#define FIQ_CNT_INT_KEY 15 +#define FIQ_CNT_INT_MDM 16 +#define FIQ_CNT_INT_03 17 +#define FIQ_CNT_INT_HSW 18 +#define FIQ_CNT_INT_05 19 +#define FIQ_CNT_INT_06 20 +#define FIQ_CNT_INT_07 21 +#define FIQ_CNT_INT_08 22 +#define FIQ_CNT_INT_09 23 +#define FIQ_CNT_INT_10 24 +#define FIQ_CNT_INT_11 25 +#define FIQ_CNT_INT_12 26 +#define FIQ_CNT_INT_13 27 +#define FIQ_CNT_INT_14 28 +#define FIQ_CNT_INT_15 29 + +#define FIQ_CIRC_BUFF 30 /*Start of circular buffer */ + +#ifndef __ASSEMBLER__ +extern unsigned int fiq_buffer[]; +extern unsigned char qwerty_fiqin_start, qwerty_fiqin_end; + +extern void __init ams_delta_init_fiq(void); +#endif + +#endif diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S index b6d9584544b4..e8a8cf36b7f0 100644 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -13,6 +13,8 @@ #include <linux/serial_reg.h> +#include <asm/memory.h> + #include <plat/serial.h> .pushsection .data @@ -37,23 +39,12 @@ omap_uart_virt: .word 0x0 cmp \rx, #0 @ is port configured? bne 99f @ already configured - /* Check 7XX UART1 scratchpad register for uart to use */ + /* Check the debug UART configuration set in uncompress.h */ mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? - moveq \rx, #0xff000000 @ physical base address - movne \rx, #0xfe000000 @ virtual base - orr \rx, \rx, #0x00fb0000 @ OMAP1UART1 - ldrb \rx, [\rx, #(UART_SCR << OMAP7XX_PORT_SHIFT)] - cmp \rx, #0 @ anything in 7XX scratchpad? - bne 10f @ found 7XX uart - - /* Check 15xx/16xx UART1 scratchpad register for uart to use */ - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0xff000000 @ physical base address - movne \rx, #0xfe000000 @ virtual base - orr \rx, \rx, #0x00fb0000 @ OMAP1UART1 - ldrb \rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)] + ldreq \rx, =OMAP_UART_INFO + ldrne \rx, =__phys_to_virt(OMAP_UART_INFO) + ldr \rx, [\rx, #0] /* Select the UART to use based on the UART1 scratchpad value */ 10: cmp \rx, #0 @ no port configured? diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 2455dcc744a0..b31b6f123122 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -10,6 +10,7 @@ config ARCH_OMAP2420 config ARCH_OMAP2430 bool "OMAP2430 support" depends on ARCH_OMAP2 + select ARCH_OMAP_OTG config ARCH_OMAP3430 bool "OMAP3430 support" @@ -141,6 +142,12 @@ config MACH_IGEP0020 depends on ARCH_OMAP3 select OMAP_PACKAGE_CBB +config MACH_SBC3530 + bool "OMAP3 SBC STALKER board" + depends on ARCH_OMAP3 + select OMAP_PACKAGE_CUS + select OMAP_MUX + config MACH_OMAP_3630SDP bool "OMAP3630 SDP board" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 4b9fc57770db..ea52b034e963 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -22,7 +22,7 @@ obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o # SMP support ONLY available for OMAP4 obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o -obj-$(CONFIG_ARCH_OMAP4) += omap44xx-smc.o +obj-$(CONFIG_ARCH_OMAP4) += omap44xx-smc.o omap4-common.o AFLAGS_omap44xx-smc.o :=-Wa,-march=armv7-a @@ -89,10 +89,7 @@ obj-$(CONFIG_OMAP3_EMU) += emu.o obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o mailbox_mach-objs := mailbox.o -iommu-y += iommu2.o -iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o - -obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y) +obj-$(CONFIG_OMAP_IOMMU) := iommu2.o omap-iommu.o i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o obj-y += $(i2c-omap-m) $(i2c-omap-y) @@ -122,6 +119,7 @@ obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ board-rx51-sdram.o \ board-rx51-peripherals.o \ + board-rx51-video.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \ board-zoom-peripherals.o \ @@ -140,10 +138,13 @@ obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \ hsmmc.o -obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o +obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \ + hsmmc.o obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o +obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \ + hsmmc.o # Platform specific device init code obj-y += usb-musb.o obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 01d113ff9fcf..a11a575745e4 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -174,9 +174,18 @@ static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = { }, }; +static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = { + { + I2C_BOARD_INFO("isp1301_omap", 0x2D), + .flags = I2C_CLIENT_WAKE, + .irq = OMAP_GPIO_IRQ(78), + }, +}; + static int __init omap2430_i2c_init(void) { - omap_register_i2c_bus(1, 400, NULL, 0); + omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo, + ARRAY_SIZE(sdp2430_i2c1_boardinfo)); omap_register_i2c_bus(2, 2600, sdp2430_i2c_boardinfo, ARRAY_SIZE(sdp2430_i2c_boardinfo)); return 0; @@ -198,6 +207,15 @@ static struct omap_musb_board_data musb_board_data = { .mode = MUSB_OTG, .power = 100, }; +static struct omap_usb_config sdp2430_usb_config __initdata = { + .otg = 1, +#ifdef CONFIG_USB_GADGET_OMAP + .hmc_mode = 0x0, +#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + .hmc_mode = 0x1, +#endif + .pins[0] = 3, +}; static void __init omap_2430sdp_init(void) { @@ -208,6 +226,7 @@ static void __init omap_2430sdp_init(void) platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices)); omap_serial_init(); omap2_hsmmc_init(mmc); + omap_usb_init(&sdp2430_usb_config); usb_musb_init(&musb_board_data); board_smc91x_init(); diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 5822bcf7b15f..e7d629b3c76a 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -150,6 +150,7 @@ static int ads7846_get_pendown_state(void) static struct ads7846_platform_data tsc2046_config __initdata = { .get_pendown_state = ads7846_get_pendown_state, .keep_vref_on = 1, + .wakeup = true, }; diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index b88f28c5814b..e4a5d66b83b8 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -18,8 +18,12 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/usb/otg.h> +#include <linux/spi/spi.h> +#include <linux/i2c/twl.h> +#include <linux/regulator/machine.h> #include <mach/hardware.h> +#include <mach/omap4-common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -29,8 +33,77 @@ #include <plat/control.h> #include <plat/timer-gp.h> #include <plat/usb.h> -#include <asm/hardware/gic.h> -#include <asm/hardware/cache-l2x0.h> +#include <plat/mmc.h> +#include "hsmmc.h" + +#define ETH_KS8851_IRQ 34 +#define ETH_KS8851_POWER_ON 48 +#define ETH_KS8851_QUART 138 + +static struct spi_board_info sdp4430_spi_board_info[] __initdata = { + { + .modalias = "ks8851", + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 24000000, + .irq = ETH_KS8851_IRQ, + }, +}; + +static int omap_ethernet_init(void) +{ + int status; + + /* Request of GPIO lines */ + + status = gpio_request(ETH_KS8851_POWER_ON, "eth_power"); + if (status) { + pr_err("Cannot request GPIO %d\n", ETH_KS8851_POWER_ON); + return status; + } + + status = gpio_request(ETH_KS8851_QUART, "quart"); + if (status) { + pr_err("Cannot request GPIO %d\n", ETH_KS8851_QUART); + goto error1; + } + + status = gpio_request(ETH_KS8851_IRQ, "eth_irq"); + if (status) { + pr_err("Cannot request GPIO %d\n", ETH_KS8851_IRQ); + goto error2; + } + + /* Configuration of requested GPIO lines */ + + status = gpio_direction_output(ETH_KS8851_POWER_ON, 1); + if (status) { + pr_err("Cannot set output GPIO %d\n", ETH_KS8851_IRQ); + goto error3; + } + + status = gpio_direction_output(ETH_KS8851_QUART, 1); + if (status) { + pr_err("Cannot set output GPIO %d\n", ETH_KS8851_QUART); + goto error3; + } + + status = gpio_direction_input(ETH_KS8851_IRQ); + if (status) { + pr_err("Cannot set input GPIO %d\n", ETH_KS8851_IRQ); + goto error3; + } + + return 0; + +error3: + gpio_free(ETH_KS8851_IRQ); +error2: + gpio_free(ETH_KS8851_QUART); +error1: + gpio_free(ETH_KS8851_POWER_ON); + return status; +} static struct platform_device sdp4430_lcd_device = { .name = "sdp4430_lcd", @@ -49,50 +122,6 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = { { OMAP_TAG_LCD, &sdp4430_lcd_config }, }; -#ifdef CONFIG_CACHE_L2X0 -static int __init omap_l2_cache_init(void) -{ - extern void omap_smc1(u32 fn, u32 arg); - void __iomem *l2cache_base; - - /* To avoid code running on other OMAPs in - * multi-omap builds - */ - if (!cpu_is_omap44xx()) - return -ENODEV; - - /* Static mapping, never released */ - l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K); - BUG_ON(!l2cache_base); - - /* Enable PL310 L2 Cache controller */ - omap_smc1(0x102, 0x1); - - /* 32KB way size, 16-way associativity, - * parity disabled - */ - l2x0_init(l2cache_base, 0x0e050000, 0xc0000fff); - - return 0; -} -early_initcall(omap_l2_cache_init); -#endif - -static void __init gic_init_irq(void) -{ - void __iomem *base; - - /* Static mapping, never released */ - base = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K); - BUG_ON(!base); - gic_dist_init(0, base, 29); - - /* Static mapping, never released */ - gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); - BUG_ON(!gic_cpu_base_addr); - gic_cpu_init(0, gic_cpu_base_addr); -} - static void __init omap_4430sdp_init_irq(void) { omap_board_config = sdp4430_config; @@ -111,15 +140,254 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; +static struct omap2_hsmmc_info mmc[] = { + { + .mmc = 1, + .wires = 8, + .gpio_wp = -EINVAL, + }, + { + .mmc = 2, + .wires = 8, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + .nonremovable = true, + }, + {} /* Terminator */ +}; + +static struct regulator_consumer_supply sdp4430_vmmc_supply[] = { + { + .supply = "vmmc", + .dev_name = "mmci-omap-hs.0", + }, + { + .supply = "vmmc", + .dev_name = "mmci-omap-hs.1", + }, +}; + +static int omap4_twl6030_hsmmc_late_init(struct device *dev) +{ + int ret = 0; + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + struct omap_mmc_platform_data *pdata = dev->platform_data; + + /* Setting MMC1 Card detect Irq */ + if (pdev->id == 0) + pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE + + MMCDETECT_INTR_OFFSET; + return ret; +} + +static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev) +{ + struct omap_mmc_platform_data *pdata = dev->platform_data; + + pdata->init = omap4_twl6030_hsmmc_late_init; +} + +static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) +{ + struct omap2_hsmmc_info *c; + + omap2_hsmmc_init(controllers); + for (c = controllers; c->mmc; c++) + omap4_twl6030_hsmmc_set_late_init(c->dev); + + return 0; +} + +static struct regulator_init_data sdp4430_vaux1 = { + .constraints = { + .min_uV = 1000000, + .max_uV = 3000000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data sdp4430_vaux2 = { + .constraints = { + .min_uV = 1200000, + .max_uV = 2800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data sdp4430_vaux3 = { + .constraints = { + .min_uV = 1000000, + .max_uV = 3000000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +/* VMMC1 for MMC1 card */ +static struct regulator_init_data sdp4430_vmmc = { + .constraints = { + .min_uV = 1200000, + .max_uV = 3000000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 2, + .consumer_supplies = sdp4430_vmmc_supply, +}; + +static struct regulator_init_data sdp4430_vpp = { + .constraints = { + .min_uV = 1800000, + .max_uV = 2500000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data sdp4430_vusim = { + .constraints = { + .min_uV = 1200000, + .max_uV = 2900000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data sdp4430_vana = { + .constraints = { + .min_uV = 2100000, + .max_uV = 2100000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data sdp4430_vcxio = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data sdp4430_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data sdp4430_vusb = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct twl4030_platform_data sdp4430_twldata = { + .irq_base = TWL6030_IRQ_BASE, + .irq_end = TWL6030_IRQ_END, + + /* Regulators */ + .vmmc = &sdp4430_vmmc, + .vpp = &sdp4430_vpp, + .vusim = &sdp4430_vusim, + .vana = &sdp4430_vana, + .vcxio = &sdp4430_vcxio, + .vdac = &sdp4430_vdac, + .vusb = &sdp4430_vusb, + .vaux1 = &sdp4430_vaux1, + .vaux2 = &sdp4430_vaux2, + .vaux3 = &sdp4430_vaux3, +}; + +static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl6030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = OMAP44XX_IRQ_SYS_1N, + .platform_data = &sdp4430_twldata, + }, +}; +static int __init omap4_i2c_init(void) +{ + /* + * Phoenix Audio IC needs I2C1 to + * start with 400 KHz or less + */ + omap_register_i2c_bus(1, 400, sdp4430_i2c_boardinfo, + ARRAY_SIZE(sdp4430_i2c_boardinfo)); + omap_register_i2c_bus(2, 400, NULL, 0); + omap_register_i2c_bus(3, 400, NULL, 0); + omap_register_i2c_bus(4, 400, NULL, 0); + return 0; +} static void __init omap_4430sdp_init(void) { + int status; + + omap4_i2c_init(); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); omap_serial_init(); + omap4_twl6030_hsmmc_init(mmc); /* OMAP4 SDP uses internal transceiver so register nop transceiver */ usb_nop_xceiv_register(); /* FIXME: allow multi-omap to boot until musb is updated for omap4 */ if (!cpu_is_omap44xx()) usb_musb_init(&musb_board_data); + + status = omap_ethernet_init(); + if (status) { + pr_err("Ethernet initialization failed: %d\n", status); + } else { + sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ); + spi_register_board_info(sdp4430_spi_board_info, + ARRAY_SIZE(sdp4430_spi_board_info)); + } } static void __init omap_4430sdp_map_io(void) diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index c1c4389fbd8f..af383a876943 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -21,6 +21,8 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/i2c/pca953x.h> +#include <linux/can/platform/ti_hecc.h> +#include <linux/davinci_emac.h> #include <mach/hardware.h> #include <mach/am35xx.h> @@ -30,16 +32,111 @@ #include <plat/board.h> #include <plat/common.h> +#include <plat/control.h> #include <plat/usb.h> #include <plat/display.h> #include "mux.h" +#define AM35XX_EVM_PHY_MASK (0xF) +#define AM35XX_EVM_MDIO_FREQUENCY (1000000) + +static struct emac_platform_data am3517_evm_emac_pdata = { + .phy_mask = AM35XX_EVM_PHY_MASK, + .mdio_max_freq = AM35XX_EVM_MDIO_FREQUENCY, + .rmii_en = 1, +}; + +static struct resource am3517_emac_resources[] = { + { + .start = AM35XX_IPSS_EMAC_BASE, + .end = AM35XX_IPSS_EMAC_BASE + 0x3FFFF, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_35XX_EMAC_C0_RXTHRESH_IRQ, + .end = INT_35XX_EMAC_C0_RXTHRESH_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .start = INT_35XX_EMAC_C0_RX_PULSE_IRQ, + .end = INT_35XX_EMAC_C0_RX_PULSE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .start = INT_35XX_EMAC_C0_TX_PULSE_IRQ, + .end = INT_35XX_EMAC_C0_TX_PULSE_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .start = INT_35XX_EMAC_C0_MISC_PULSE_IRQ, + .end = INT_35XX_EMAC_C0_MISC_PULSE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device am3517_emac_device = { + .name = "davinci_emac", + .id = -1, + .num_resources = ARRAY_SIZE(am3517_emac_resources), + .resource = am3517_emac_resources, +}; + +static void am3517_enable_ethernet_int(void) +{ + u32 regval; + + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | + AM35XX_CPGMAC_C0_TX_PULSE_CLR | + AM35XX_CPGMAC_C0_MISC_PULSE_CLR | + AM35XX_CPGMAC_C0_RX_THRESH_CLR); + omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); +} + +static void am3517_disable_ethernet_int(void) +{ + u32 regval; + + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | + AM35XX_CPGMAC_C0_TX_PULSE_CLR); + omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); +} + +void am3517_evm_ethernet_init(struct emac_platform_data *pdata) +{ + unsigned int regval; + + pdata->ctrl_reg_offset = AM35XX_EMAC_CNTRL_OFFSET; + pdata->ctrl_mod_reg_offset = AM35XX_EMAC_CNTRL_MOD_OFFSET; + pdata->ctrl_ram_offset = AM35XX_EMAC_CNTRL_RAM_OFFSET; + pdata->mdio_reg_offset = AM35XX_EMAC_MDIO_OFFSET; + pdata->ctrl_ram_size = AM35XX_EMAC_CNTRL_RAM_SIZE; + pdata->version = EMAC_VERSION_2; + pdata->hw_ram_addr = AM35XX_EMAC_HW_RAM_ADDR; + pdata->interrupt_enable = am3517_enable_ethernet_int; + pdata->interrupt_disable = am3517_disable_ethernet_int; + am3517_emac_device.dev.platform_data = pdata; + platform_device_register(&am3517_emac_device); + + regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); + regval = regval & (~(AM35XX_CPGMACSS_SW_RST)); + omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET); + regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); + + return ; +} + + + #define LCD_PANEL_PWR 176 #define LCD_PANEL_BKLIGHT_PWR 182 #define LCD_PANEL_PWM 181 -static struct i2c_board_info __initdata am3517evm_i2c_boardinfo[] = { +static struct i2c_board_info __initdata am3517evm_i2c1_boardinfo[] = { { I2C_BOARD_INFO("s35390a", 0x30), .type = "s35390a", @@ -69,7 +166,7 @@ static void __init am3517_evm_rtc_init(void) gpio_free(GPIO_RTCS35390A_IRQ); return; } - am3517evm_i2c_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ); + am3517evm_i2c1_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ); } /* @@ -80,7 +177,7 @@ static void __init am3517_evm_rtc_init(void) static struct pca953x_platform_data am3517evm_gpio_expander_info_0 = { .gpio_base = OMAP_MAX_GPIO_LINES, }; -static struct i2c_board_info __initdata am3517evm_tca6416_info_0[] = { +static struct i2c_board_info __initdata am3517evm_i2c2_boardinfo[] = { { I2C_BOARD_INFO("tca6416", 0x21), .platform_data = &am3517evm_gpio_expander_info_0, @@ -94,7 +191,7 @@ static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_1 = { static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_2 = { .gpio_base = OMAP_MAX_GPIO_LINES + 32, }; -static struct i2c_board_info __initdata am3517evm_ui_tca6416_info[] = { +static struct i2c_board_info __initdata am3517evm_i2c3_boardinfo[] = { { I2C_BOARD_INFO("tca6416", 0x20), .platform_data = &am3517evm_ui_gpio_expander_info_1, @@ -108,10 +205,10 @@ static struct i2c_board_info __initdata am3517evm_ui_tca6416_info[] = { static int __init am3517_evm_i2c_init(void) { omap_register_i2c_bus(1, 400, NULL, 0); - omap_register_i2c_bus(2, 400, am3517evm_tca6416_info_0, - ARRAY_SIZE(am3517evm_tca6416_info_0)); - omap_register_i2c_bus(3, 400, am3517evm_ui_tca6416_info, - ARRAY_SIZE(am3517evm_ui_tca6416_info)); + omap_register_i2c_bus(2, 400, am3517evm_i2c2_boardinfo, + ARRAY_SIZE(am3517evm_i2c2_boardinfo)); + omap_register_i2c_bus(3, 400, am3517evm_i2c3_boardinfo, + ARRAY_SIZE(am3517evm_i2c3_boardinfo)); return 0; } @@ -119,6 +216,8 @@ static int __init am3517_evm_i2c_init(void) static int lcd_enabled; static int dvi_enabled; +#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ + defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) static void __init am3517_evm_display_init(void) { int r; @@ -162,6 +261,9 @@ err_2: err_1: gpio_free(LCD_PANEL_BKLIGHT_PWR); } +#else +static void __init am3517_evm_display_init(void) {} +#endif static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev) { @@ -275,7 +377,12 @@ static void __init am3517_evm_init_irq(void) static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, +#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ + defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) + .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, +#else .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, +#endif .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, .phy_reset = true, @@ -292,6 +399,42 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif + +static struct resource am3517_hecc_resources[] = { + { + .start = AM35XX_IPSS_HECC_BASE, + .end = AM35XX_IPSS_HECC_BASE + 0x3FFF, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_35XX_HECC0_IRQ, + .end = INT_35XX_HECC0_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device am3517_hecc_device = { + .name = "ti_hecc", + .id = -1, + .num_resources = ARRAY_SIZE(am3517_hecc_resources), + .resource = am3517_hecc_resources, +}; + +static struct ti_hecc_platform_data am3517_evm_hecc_pdata = { + .scc_hecc_offset = AM35XX_HECC_SCC_HECC_OFFSET, + .scc_ram_offset = AM35XX_HECC_SCC_RAM_OFFSET, + .hecc_ram_offset = AM35XX_HECC_RAM_OFFSET, + .mbx_offset = AM35XX_HECC_MBOX_OFFSET, + .int_line = AM35XX_HECC_INT_LINE, + .version = AM35XX_HECC_VERSION, +}; + +static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata) +{ + am3517_hecc_device.dev.platform_data = pdata; + platform_device_register(&am3517_hecc_device); +} + static void __init am3517_evm_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -305,14 +448,17 @@ static void __init am3517_evm_init(void) /* Configure GPIO for EHCI port */ omap_mux_init_gpio(57, OMAP_PIN_OUTPUT); usb_ehci_init(&ehci_pdata); + am3517_evm_hecc_init(&am3517_evm_hecc_pdata); /* DSS */ am3517_evm_display_init(); /* RTC - S35390A */ am3517_evm_rtc_init(); - i2c_register_board_info(1, am3517evm_i2c_boardinfo, - ARRAY_SIZE(am3517evm_i2c_boardinfo)); + i2c_register_board_info(1, am3517evm_i2c1_boardinfo, + ARRAY_SIZE(am3517evm_i2c1_boardinfo)); + /*Ethernet*/ + am3517_evm_ethernet_init(&am3517_evm_emac_pdata); } static void __init am3517_evm_map_io(void) diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 2de4f79f03a0..e679a2cc86c3 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -45,6 +45,7 @@ #include <plat/gpmc.h> #include <plat/usb.h> #include <plat/display.h> +#include <plat/mcspi.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 47e3af2166d4..77022b588816 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -633,8 +633,163 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +static struct omap_board_mux board_mux[] __initdata = { + /* nCS and IRQ for Devkit8000 ethernet */ + OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE0), + OMAP3_MUX(ETK_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + + /* McSPI 2*/ + OMAP3_MUX(MCSPI2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI2_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(MCSPI2_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI2_CS0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(MCSPI2_CS1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + + /* PENDOWN GPIO */ + OMAP3_MUX(ETK_D13, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + + /* mUSB */ + OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* USB 1 */ + OMAP3_MUX(ETK_CTL, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT), + OMAP3_MUX(ETK_D8, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + OMAP3_MUX(ETK_D9, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + OMAP3_MUX(ETK_D0, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + OMAP3_MUX(ETK_D1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + OMAP3_MUX(ETK_D2, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + OMAP3_MUX(ETK_D3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + OMAP3_MUX(ETK_D4, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + OMAP3_MUX(ETK_D5, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + OMAP3_MUX(ETK_D6, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + OMAP3_MUX(ETK_D7, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), + + /* MMC 1 */ + OMAP3_MUX(SDMMC1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(SDMMC1_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(SDMMC1_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(SDMMC1_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(SDMMC1_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(SDMMC1_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(SDMMC1_DAT4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(SDMMC1_DAT5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(SDMMC1_DAT6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(SDMMC1_DAT7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* McBSP 2 */ + OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + + /* I2C 1 */ + OMAP3_MUX(I2C1_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(I2C1_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* I2C 2 */ + OMAP3_MUX(I2C2_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* I2C 3 */ + OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* I2C 4 */ + OMAP3_MUX(I2C4_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(I2C4_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* serial ports */ + OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* DSS */ + OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + + /* expansion port */ + /* McSPI 1 */ + OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP3_MUX(MCSPI1_CS3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + + /* HDQ */ + OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* McSPI4 */ + OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP), + + /* MMC 2 */ + OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + + /* I2C3 */ + OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + + OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + + /* TPS IRQ */ + OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \ + OMAP_PIN_INPUT_PULLUP), + + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; + static void __init devkit8000_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_serial_init(); omap_dm9000_init(); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 962d377970e9..69b154cdc75d 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -39,6 +39,7 @@ #include <plat/board.h> #include <plat/common.h> +#include <plat/display.h> #include <plat/gpmc.h> #include <plat/nand.h> #include <plat/usb.h> @@ -106,6 +107,77 @@ static struct platform_device omap3beagle_nand_device = { .resource = &omap3beagle_nand_resource, }; +/* DSS */ + +static int beagle_enable_dvi(struct omap_dss_device *dssdev) +{ + if (gpio_is_valid(dssdev->reset_gpio)) + gpio_set_value(dssdev->reset_gpio, 1); + + return 0; +} + +static void beagle_disable_dvi(struct omap_dss_device *dssdev) +{ + if (gpio_is_valid(dssdev->reset_gpio)) + gpio_set_value(dssdev->reset_gpio, 0); +} + +static struct omap_dss_device beagle_dvi_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "dvi", + .driver_name = "generic_panel", + .phy.dpi.data_lines = 24, + .reset_gpio = 170, + .platform_enable = beagle_enable_dvi, + .platform_disable = beagle_disable_dvi, +}; + +static struct omap_dss_device beagle_tv_device = { + .name = "tv", + .driver_name = "venc", + .type = OMAP_DISPLAY_TYPE_VENC, + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +}; + +static struct omap_dss_device *beagle_dss_devices[] = { + &beagle_dvi_device, + &beagle_tv_device, +}; + +static struct omap_dss_board_info beagle_dss_data = { + .num_devices = ARRAY_SIZE(beagle_dss_devices), + .devices = beagle_dss_devices, + .default_device = &beagle_dvi_device, +}; + +static struct platform_device beagle_dss_device = { + .name = "omapdss", + .id = -1, + .dev = { + .platform_data = &beagle_dss_data, + }, +}; + +static struct regulator_consumer_supply beagle_vdac_supply = + REGULATOR_SUPPLY("vdda_dac", "omapdss"); + +static struct regulator_consumer_supply beagle_vdvi_supply = + REGULATOR_SUPPLY("vdds_dsi", "omapdss"); + +static void __init beagle_display_init(void) +{ + int r; + + r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset"); + if (r < 0) { + printk(KERN_ERR "Unable to get DVI reset GPIO\n"); + return; + } + + gpio_direction_output(beagle_dvi_device.reset_gpio, 0); +} + #include "sdram-micron-mt46h32m32lf-6.h" static struct omap2_hsmmc_info mmc[] = { @@ -117,15 +189,6 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct platform_device omap3_beagle_lcd_device = { - .name = "omap3beagle_lcd", - .id = -1, -}; - -static struct omap_lcd_config omap3_beagle_lcd_config __initdata = { - .ctrl_name = "internal", -}; - static struct regulator_consumer_supply beagle_vmmc1_supply = { .supply = "vmmc", }; @@ -181,16 +244,6 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = { .setup = beagle_twl_gpio_setup, }; -static struct regulator_consumer_supply beagle_vdac_supply = { - .supply = "vdac", - .dev = &omap3_beagle_lcd_device.dev, -}; - -static struct regulator_consumer_supply beagle_vdvi_supply = { - .supply = "vdvi", - .dev = &omap3_beagle_lcd_device.dev, -}; - /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ static struct regulator_init_data beagle_vmmc1 = { .constraints = { @@ -349,14 +402,8 @@ static struct platform_device keys_gpio = { }, }; -static struct omap_board_config_kernel omap3_beagle_config[] __initdata = { - { OMAP_TAG_LCD, &omap3_beagle_lcd_config }, -}; - static void __init omap3_beagle_init_irq(void) { - omap_board_config = omap3_beagle_config; - omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); omap2_init_common_hw(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); omap_init_irq(); @@ -367,9 +414,9 @@ static void __init omap3_beagle_init_irq(void) } static struct platform_device *omap3_beagle_devices[] __initdata = { - &omap3_beagle_lcd_device, &leds_gpio, &keys_gpio, + &beagle_dss_device, }; static void __init omap3beagle_flash_init(void) @@ -456,6 +503,8 @@ static void __init omap3_beagle_init(void) /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); + + beagle_display_init(); } static void __init omap3_beagle_map_io(void) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 7d7b5bc8dc31..81bba194b030 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -600,6 +600,7 @@ struct ads7846_platform_data ads7846_config = { .get_pendown_state = ads7846_get_pendown_state, .keep_vref_on = 1, .settle_delay_usecs = 150, + .wakeup = true, }; static struct omap2_mcspi_device_config ads7846_mcspi_config = { @@ -651,11 +652,10 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP | - OMAP_PIN_OFF_INPUT_PULLUP | + OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW | OMAP_PIN_OFF_WAKEUPENABLE), OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | - OMAP_PIN_OFF_INPUT_PULLUP | - OMAP_PIN_OFF_WAKEUPENABLE), + OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c new file mode 100644 index 000000000000..f848ba8dbc16 --- /dev/null +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -0,0 +1,672 @@ +/* + * linux/arch/arm/mach-omap2/board-omap3evm.c + * + * Copyright (C) 2008 Guangzhou EMA-Tech + * + * Modified from mach-omap2/board-omap3evm.c + * + * Initial code: Syed Mohammed Khasim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> + +#include <linux/regulator/machine.h> +#include <linux/i2c/twl.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <plat/board.h> +#include <plat/common.h> +#include <plat/gpmc.h> +#include <plat/nand.h> +#include <plat/usb.h> +#include <plat/timer-gp.h> +#include <plat/display.h> + +#include <plat/mcspi.h> +#include <linux/input/matrix_keypad.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> +#include <linux/interrupt.h> +#include <linux/smsc911x.h> +#include <linux/i2c/at24.h> + +#include "sdram-micron-mt46h32m32lf-6.h" +#include "mux.h" +#include "hsmmc.h" + +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#define OMAP3STALKER_ETHR_START 0x2c000000 +#define OMAP3STALKER_ETHR_SIZE 1024 +#define OMAP3STALKER_ETHR_GPIO_IRQ 19 +#define OMAP3STALKER_SMC911X_CS 5 + +static struct resource omap3stalker_smsc911x_resources[] = { + [0] = { + .start = OMAP3STALKER_ETHR_START, + .end = + (OMAP3STALKER_ETHR_START + OMAP3STALKER_ETHR_SIZE - 1), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = OMAP_GPIO_IRQ(OMAP3STALKER_ETHR_GPIO_IRQ), + .end = OMAP_GPIO_IRQ(OMAP3STALKER_ETHR_GPIO_IRQ), + .flags = (IORESOURCE_IRQ | IRQF_TRIGGER_LOW), + }, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS), +}; + +static struct platform_device omap3stalker_smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(omap3stalker_smsc911x_resources), + .resource = &omap3stalker_smsc911x_resources[0], + .dev = { + .platform_data = &smsc911x_config, + }, +}; + +static inline void __init omap3stalker_init_eth(void) +{ + int eth_cs; + struct clk *l3ck; + unsigned int rate; + + eth_cs = OMAP3STALKER_SMC911X_CS; + + l3ck = clk_get(NULL, "l3_ck"); + if (IS_ERR(l3ck)) + rate = 100000000; + else + rate = clk_get_rate(l3ck); + + omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP); + if (gpio_request(OMAP3STALKER_ETHR_GPIO_IRQ, "SMC911x irq") < 0) { + printk(KERN_ERR + "Failed to request GPIO%d for smc911x IRQ\n", + OMAP3STALKER_ETHR_GPIO_IRQ); + return; + } + + gpio_direction_input(OMAP3STALKER_ETHR_GPIO_IRQ); + + platform_device_register(&omap3stalker_smsc911x_device); +} + +#else +static inline void __init omap3stalker_init_eth(void) +{ + return; +} +#endif + +/* + * OMAP3 DSS control signals + */ + +#define DSS_ENABLE_GPIO 199 +#define LCD_PANEL_BKLIGHT_GPIO 210 +#define ENABLE_VPLL2_DEV_GRP 0xE0 + +static int lcd_enabled; +static int dvi_enabled; + +static void __init omap3_stalker_display_init(void) +{ + return; +} + +static int omap3_stalker_enable_lcd(struct omap_dss_device *dssdev) +{ + if (dvi_enabled) { + printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); + return -EINVAL; + } + gpio_set_value(DSS_ENABLE_GPIO, 1); + gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 1); + lcd_enabled = 1; + return 0; +} + +static void omap3_stalker_disable_lcd(struct omap_dss_device *dssdev) +{ + gpio_set_value(DSS_ENABLE_GPIO, 0); + gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 0); + lcd_enabled = 0; +} + +static struct omap_dss_device omap3_stalker_lcd_device = { + .name = "lcd", + .driver_name = "generic_panel", + .phy.dpi.data_lines = 24, + .type = OMAP_DISPLAY_TYPE_DPI, + .platform_enable = omap3_stalker_enable_lcd, + .platform_disable = omap3_stalker_disable_lcd, +}; + +static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev) +{ + return 0; +} + +static void omap3_stalker_disable_tv(struct omap_dss_device *dssdev) +{ +} + +static struct omap_dss_device omap3_stalker_tv_device = { + .name = "tv", + .driver_name = "venc", + .type = OMAP_DISPLAY_TYPE_VENC, +#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO) + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE) + .u.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE, +#endif + .platform_enable = omap3_stalker_enable_tv, + .platform_disable = omap3_stalker_disable_tv, +}; + +static int omap3_stalker_enable_dvi(struct omap_dss_device *dssdev) +{ + if (lcd_enabled) { + printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); + return -EINVAL; + } + gpio_set_value(DSS_ENABLE_GPIO, 1); + dvi_enabled = 1; + return 0; +} + +static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev) +{ + gpio_set_value(DSS_ENABLE_GPIO, 0); + dvi_enabled = 0; +} + +static struct omap_dss_device omap3_stalker_dvi_device = { + .name = "dvi", + .driver_name = "generic_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 24, + .platform_enable = omap3_stalker_enable_dvi, + .platform_disable = omap3_stalker_disable_dvi, +}; + +static struct omap_dss_device *omap3_stalker_dss_devices[] = { + &omap3_stalker_lcd_device, + &omap3_stalker_tv_device, + &omap3_stalker_dvi_device, +}; + +static struct omap_dss_board_info omap3_stalker_dss_data = { + .num_devices = ARRAY_SIZE(omap3_stalker_dss_devices), + .devices = omap3_stalker_dss_devices, + .default_device = &omap3_stalker_dvi_device, +}; + +static struct platform_device omap3_stalker_dss_device = { + .name = "omapdss", + .id = -1, + .dev = { + .platform_data = &omap3_stalker_dss_data, + }, +}; + +static struct regulator_consumer_supply omap3stalker_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply omap3stalker_vsim_supply = { + .supply = "vmmc_aux", +}; + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data omap3stalker_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &omap3stalker_vmmc1_supply, +}; + +/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ +static struct regulator_init_data omap3stalker_vsim = { + .constraints = { + .min_uV = 1800000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &omap3stalker_vsim_supply, +}; + +static struct omap2_hsmmc_info mmc[] = { + { + .mmc = 1, + .wires = 4, + .gpio_cd = -EINVAL, + .gpio_wp = 23, + }, + {} /* Terminator */ +}; + +static struct gpio_keys_button gpio_buttons[] = { + { + .code = BTN_EXTRA, + .gpio = 18, + .desc = "user", + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data gpio_key_info = { + .buttons = gpio_buttons, + .nbuttons = ARRAY_SIZE(gpio_buttons), +}; + +static struct platform_device keys_gpio = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &gpio_key_info, + }, +}; + +static struct gpio_led gpio_leds[] = { + { + .name = "stalker:D8:usr0", + .default_trigger = "default-on", + .gpio = 126, + }, + { + .name = "stalker:D9:usr1", + .default_trigger = "default-on", + .gpio = 127, + }, + { + .name = "stalker:D3:mmc0", + .gpio = -EINVAL, /* gets replaced */ + .active_low = true, + .default_trigger = "mmc0", + }, + { + .name = "stalker:D4:heartbeat", + .gpio = -EINVAL, /* gets replaced */ + .active_low = true, + .default_trigger = "heartbeat", + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + +static int +omap3stalker_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + omap_mux_init_gpio(23, OMAP_PIN_INPUT); + mmc[0].gpio_cd = gpio + 0; + omap2_hsmmc_init(mmc); + + /* link regulators to MMC adapters */ + omap3stalker_vmmc1_supply.dev = mmc[0].dev; + omap3stalker_vsim_supply.dev = mmc[0].dev; + + /* + * Most GPIOs are for USB OTG. Some are mostly sent to + * the P2 connector; notably LEDA for the LCD backlight. + */ + + /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */ + gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL"); + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + + /* gpio + 7 == DVI Enable */ + gpio_request(gpio + 7, "EN_DVI"); + gpio_direction_output(gpio + 7, 0); + + /* TWL4030_GPIO_MAX + 1 == ledB (out, mmc0) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + /* GPIO + 13 == ledsync (out, heartbeat) */ + gpio_leds[3].gpio = gpio + 13; + + platform_device_register(&leds_gpio); + return 0; +} + +static struct twl4030_gpio_platform_data omap3stalker_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = true, + .setup = omap3stalker_twl_gpio_setup, +}; + +static struct twl4030_usb_data omap3stalker_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static int board_keymap[] = { + KEY(0, 0, KEY_LEFT), + KEY(0, 1, KEY_DOWN), + KEY(0, 2, KEY_ENTER), + KEY(0, 3, KEY_M), + + KEY(1, 0, KEY_RIGHT), + KEY(1, 1, KEY_UP), + KEY(1, 2, KEY_I), + KEY(1, 3, KEY_N), + + KEY(2, 0, KEY_A), + KEY(2, 1, KEY_E), + KEY(2, 2, KEY_J), + KEY(2, 3, KEY_O), + + KEY(3, 0, KEY_B), + KEY(3, 1, KEY_F), + KEY(3, 2, KEY_K), + KEY(3, 3, KEY_P) +}; + +static struct matrix_keymap_data board_map_data = { + .keymap = board_keymap, + .keymap_size = ARRAY_SIZE(board_keymap), +}; + +static struct twl4030_keypad_data omap3stalker_kp_data = { + .keymap_data = &board_map_data, + .rows = 4, + .cols = 4, + .rep = 1, +}; + +static struct twl4030_madc_platform_data omap3stalker_madc_data = { + .irq_line = 1, +}; + +static struct twl4030_codec_audio_data omap3stalker_audio_data = { + .audio_mclk = 26000000, +}; + +static struct twl4030_codec_data omap3stalker_codec_data = { + .audio_mclk = 26000000, + .audio = &omap3stalker_audio_data, +}; + +static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply = { + .supply = "vdda_dac", + .dev = &omap3_stalker_dss_device.dev, +}; + +/* VDAC for DSS driving S-Video */ +static struct regulator_init_data omap3_stalker_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &omap3_stalker_vdda_dac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_consumer_supply omap3_stalker_vpll2_supply = { + .supply = "vdds_dsi", + .dev = &omap3_stalker_lcd_device.dev, +}; + +static struct regulator_init_data omap3_stalker_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &omap3_stalker_vpll2_supply, +}; + +static struct twl4030_platform_data omap3stalker_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .keypad = &omap3stalker_kp_data, + .madc = &omap3stalker_madc_data, + .usb = &omap3stalker_usb_data, + .gpio = &omap3stalker_gpio_data, + .codec = &omap3stalker_codec_data, + .vdac = &omap3_stalker_vdac, + .vpll2 = &omap3_stalker_vpll2, +}; + +static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &omap3stalker_twldata, + }, +}; + +static struct at24_platform_data fram_info = { + .byte_len = (64 * 1024) / 8, + .page_size = 8192, + .flags = AT24_FLAG_ADDR16 | AT24_FLAG_IRUGO, +}; + +static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = { + { + I2C_BOARD_INFO("24c64", 0x50), + .flags = I2C_CLIENT_WAKE, + .platform_data = &fram_info, + }, +}; + +static int __init omap3_stalker_i2c_init(void) +{ + /* + * REVISIT: These entries can be set in omap3evm_twl_data + * after a merge with MFD tree + */ + omap3stalker_twldata.vmmc1 = &omap3stalker_vmmc1; + omap3stalker_twldata.vsim = &omap3stalker_vsim; + + omap_register_i2c_bus(1, 2600, omap3stalker_i2c_boardinfo, + ARRAY_SIZE(omap3stalker_i2c_boardinfo)); + omap_register_i2c_bus(2, 400, NULL, 0); + omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3, + ARRAY_SIZE(omap3stalker_i2c_boardinfo3)); + return 0; +} + +#define OMAP3_STALKER_TS_GPIO 175 +static void ads7846_dev_init(void) +{ + if (gpio_request(OMAP3_STALKER_TS_GPIO, "ADS7846 pendown") < 0) + printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); + + gpio_direction_input(OMAP3_STALKER_TS_GPIO); + + omap_set_gpio_debounce(OMAP3_STALKER_TS_GPIO, 1); + omap_set_gpio_debounce_time(OMAP3_STALKER_TS_GPIO, 0xa); +} + +static int ads7846_get_pendown_state(void) +{ + return !gpio_get_value(OMAP3_STALKER_TS_GPIO); +} + +static struct ads7846_platform_data ads7846_config = { + .x_max = 0x0fff, + .y_max = 0x0fff, + .x_plate_ohms = 180, + .pressure_max = 255, + .debounce_max = 10, + .debounce_tol = 3, + .debounce_rep = 1, + .get_pendown_state = ads7846_get_pendown_state, + .keep_vref_on = 1, + .settle_delay_usecs = 150, +}; + +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +struct spi_board_info omap3stalker_spi_board_info[] = { + [0] = { + .modalias = "ads7846", + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = OMAP_GPIO_IRQ(OMAP3_STALKER_TS_GPIO), + .platform_data = &ads7846_config, + }, +}; + +static struct omap_board_config_kernel omap3_stalker_config[] __initdata = { +}; + +static void __init omap3_stalker_init_irq(void) +{ + omap_board_config = omap3_stalker_config; + omap_board_config_size = ARRAY_SIZE(omap3_stalker_config); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL); + omap_init_irq(); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(12); +#endif + omap_gpio_init(); +} + +static struct platform_device *omap3_stalker_devices[] __initdata = { + &omap3_stalker_dss_device, + &keys_gpio, +}; + +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { + .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = 21, + .reset_gpio_port[2] = -EINVAL, +}; + +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP | + OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), + OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | + OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), + {.reg_offset = OMAP_MUX_TERMINATOR}, +}; +#else +#define board_mux NULL +#endif + +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + +static void __init omap3_stalker_init(void) +{ + omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); + + omap3_stalker_i2c_init(); + + platform_add_devices(omap3_stalker_devices, + ARRAY_SIZE(omap3_stalker_devices)); + + spi_register_board_info(omap3stalker_spi_board_info, + ARRAY_SIZE(omap3stalker_spi_board_info)); + + omap_serial_init(); + usb_musb_init(&musb_board_data); + usb_ehci_init(&ehci_pdata); + ads7846_dev_init(); + + omap_mux_init_gpio(21, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(18, OMAP_PIN_INPUT_PULLUP); + + omap3stalker_init_eth(); + omap3_stalker_display_init(); +/* Ensure SDRC pins are mux'd for self-refresh */ + omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT); +} + +static void __init omap3_stalker_map_io(void) +{ + omap2_set_globals_343x(); + omap34xx_map_common_io(); +} + +MACHINE_START(SBC3530, "OMAP3 STALKER") + /* Maintainer: Jason Lam -lzg@ema-tech.com */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_stalker_map_io, + .init_irq = omap3_stalker_init_irq, + .init_machine = omap3_stalker_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 8848c7c5ce48..79ac41400c21 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -63,6 +63,8 @@ #define OVERO_SMSC911X_CS 5 #define OVERO_SMSC911X_GPIO 176 +#define OVERO_SMSC911X2_CS 4 +#define OVERO_SMSC911X2_GPIO 65 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) @@ -137,6 +139,16 @@ static struct resource overo_smsc911x_resources[] = { }, }; +static struct resource overo_smsc911x2_resources[] = { + { + .name = "smsc911x2-memory", + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + static struct smsc911x_platform_config overo_smsc911x_config = { .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, @@ -146,7 +158,7 @@ static struct smsc911x_platform_config overo_smsc911x_config = { static struct platform_device overo_smsc911x_device = { .name = "smsc911x", - .id = -1, + .id = 0, .num_resources = ARRAY_SIZE(overo_smsc911x_resources), .resource = overo_smsc911x_resources, .dev = { diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 4377a4cf36eb..abdf321c2d41 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -45,6 +45,8 @@ /* list all spi devices here */ enum { RX51_SPI_WL1251, + RX51_SPI_MIPID, /* LCD panel */ + RX51_SPI_TSC2005, /* Touch Controller */ }; static struct wl12xx_platform_data wl1251_pdata; @@ -54,6 +56,16 @@ static struct omap2_mcspi_device_config wl1251_mcspi_config = { .single_channel = 1, }; +static struct omap2_mcspi_device_config mipid_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, +}; + +static struct omap2_mcspi_device_config tsc2005_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, +}; + static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { [RX51_SPI_WL1251] = { .modalias = "wl1251", @@ -64,6 +76,22 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { .controller_data = &wl1251_mcspi_config, .platform_data = &wl1251_pdata, }, + [RX51_SPI_MIPID] = { + .modalias = "acx565akm", + .bus_num = 1, + .chip_select = 2, + .max_speed_hz = 6000000, + .controller_data = &mipid_mcspi_config, + }, + [RX51_SPI_TSC2005] = { + .modalias = "tsc2005", + .bus_num = 1, + .chip_select = 0, + /* .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),*/ + .max_speed_hz = 6000000, + .controller_data = &tsc2005_mcspi_config, + /* .platform_data = &tsc2005_config,*/ + }, }; #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) @@ -277,7 +305,7 @@ static struct regulator_consumer_supply rx51_vmmc1_supply = { .dev_name = "mmci-omap-hs.0", }; -static struct regulator_consumer_supply rx51_vmmc2_supply = { +static struct regulator_consumer_supply rx51_vaux3_supply = { .supply = "vmmc", .dev_name = "mmci-omap-hs.1", }; @@ -287,6 +315,48 @@ static struct regulator_consumer_supply rx51_vsim_supply = { .dev_name = "mmci-omap-hs.1", }; +static struct regulator_consumer_supply rx51_vmmc2_supplies[] = { + /* tlv320aic3x analog supplies */ + { + .supply = "AVDD", + .dev_name = "2-0018", + }, + { + .supply = "DRVDD", + .dev_name = "2-0018", + }, + /* Keep vmmc as last item. It is not iterated for newer boards */ + { + .supply = "vmmc", + .dev_name = "mmci-omap-hs.1", + }, +}; + +static struct regulator_consumer_supply rx51_vio_supplies[] = { + /* tlv320aic3x digital supplies */ + { + .supply = "IOVDD", + .dev_name = "2-0018" + }, + { + .supply = "DVDD", + .dev_name = "2-0018" + }, +}; + +#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) +extern struct platform_device rx51_display_device; +#endif + +static struct regulator_consumer_supply rx51_vaux1_consumers[] = { +#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) + { + .supply = "vdds_sdi", + .dev = &rx51_display_device.dev, + }, +#endif +}; + static struct regulator_init_data rx51_vaux1 = { .constraints = { .name = "V28", @@ -297,6 +367,8 @@ static struct regulator_init_data rx51_vaux1 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(rx51_vaux1_consumers), + .consumer_supplies = rx51_vaux1_consumers, }; static struct regulator_init_data rx51_vaux2 = { @@ -338,7 +410,7 @@ static struct regulator_init_data rx51_vaux3_mmc = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &rx51_vmmc2_supply, + .consumer_supplies = &rx51_vaux3_supply, }; static struct regulator_init_data rx51_vaux4 = { @@ -370,9 +442,9 @@ static struct regulator_init_data rx51_vmmc1 = { static struct regulator_init_data rx51_vmmc2 = { .constraints = { - .name = "VMMC2_30", - .min_uV = 1850000, - .max_uV = 3150000, + .name = "V28_A", + .min_uV = 2800000, + .max_uV = 3000000, .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, @@ -380,8 +452,8 @@ static struct regulator_init_data rx51_vmmc2 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &rx51_vmmc2_supply, + .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc2_supplies), + .consumer_supplies = rx51_vmmc2_supplies, }; static struct regulator_init_data rx51_vsim = { @@ -411,6 +483,20 @@ static struct regulator_init_data rx51_vdac = { }, }; +static struct regulator_init_data rx51_vio = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(rx51_vio_supplies), + .consumer_supplies = rx51_vio_supplies, +}; + static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) { /* FIXME this gpio setup is just a placeholder for now */ @@ -618,6 +704,7 @@ static struct twl4030_platform_data rx51_twldata __initdata = { .vmmc1 = &rx51_vmmc1, .vsim = &rx51_vsim, .vdac = &rx51_vdac, + .vio = &rx51_vio, }; static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = { @@ -629,18 +716,27 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = { }, }; +static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { + { + I2C_BOARD_INFO("tlv320aic3x", 0x18), + }, +}; + static int __init rx51_i2c_init(void) { if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || - system_rev >= SYSTEM_REV_B_USES_VAUX3) + system_rev >= SYSTEM_REV_B_USES_VAUX3) { rx51_twldata.vaux3 = &rx51_vaux3_mmc; - else { + /* Only older boards use VMMC2 for internal MMC */ + rx51_vmmc2.num_consumer_supplies--; + } else { rx51_twldata.vaux3 = &rx51_vaux3_cam; - rx51_twldata.vmmc2 = &rx51_vmmc2; } + rx51_twldata.vmmc2 = &rx51_vmmc2; omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1, - ARRAY_SIZE(rx51_peripherals_i2c_board_info_1)); - omap_register_i2c_bus(2, 100, NULL, 0); + ARRAY_SIZE(rx51_peripherals_i2c_board_info_1)); + omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, + ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); omap_register_i2c_bus(3, 400, NULL, 0); return 0; } diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c new file mode 100644 index 000000000000..b743a4f42649 --- /dev/null +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -0,0 +1,109 @@ +/* + * linux/arch/arm/mach-omap2/board-rx51-video.c + * + * Copyright (C) 2010 Nokia + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/spi/spi.h> +#include <linux/mm.h> + +#include <asm/mach-types.h> +#include <plat/mux.h> +#include <plat/display.h> +#include <plat/vram.h> +#include <plat/mcspi.h> + +#include "mux.h" + +#define RX51_LCD_RESET_GPIO 90 + +#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) + +static int rx51_lcd_enable(struct omap_dss_device *dssdev) +{ + gpio_set_value(dssdev->reset_gpio, 1); + return 0; +} + +static void rx51_lcd_disable(struct omap_dss_device *dssdev) +{ + gpio_set_value(dssdev->reset_gpio, 0); +} + +static struct omap_dss_device rx51_lcd_device = { + .name = "lcd", + .driver_name = "panel-acx565akm", + .type = OMAP_DISPLAY_TYPE_SDI, + .phy.sdi.datapairs = 2, + .reset_gpio = RX51_LCD_RESET_GPIO, + .platform_enable = rx51_lcd_enable, + .platform_disable = rx51_lcd_disable, +}; + +static struct omap_dss_device *rx51_dss_devices[] = { + &rx51_lcd_device, +}; + +static struct omap_dss_board_info rx51_dss_board_info = { + .num_devices = ARRAY_SIZE(rx51_dss_devices), + .devices = rx51_dss_devices, + .default_device = &rx51_lcd_device, +}; + +struct platform_device rx51_display_device = { + .name = "omapdss", + .id = -1, + .dev = { + .platform_data = &rx51_dss_board_info, + }, +}; + +static struct platform_device *rx51_video_devices[] __initdata = { + &rx51_display_device, +}; + +static int __init rx51_video_init(void) +{ + if (!machine_is_nokia_rx51()) + return 0; + + if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) { + pr_err("%s cannot configure MUX for LCD RESET\n", __func__); + return 0; + } + + if (gpio_request(RX51_LCD_RESET_GPIO, "LCD ACX565AKM reset")) { + pr_err("%s failed to get LCD Reset GPIO\n", __func__); + return 0; + } + + gpio_direction_output(RX51_LCD_RESET_GPIO, 1); + + platform_add_devices(rx51_video_devices, + ARRAY_SIZE(rx51_video_devices)); + return 0; +} + +subsys_initcall(rx51_video_init); + +void __init rx51_video_mem_init(void) +{ + /* + * GFX 864x480x32bpp + * VID1/2 1280x720x32bpp double buffered + */ + omap_vram_set_sdram_vram(PAGE_ALIGN(864 * 480 * 4) + + 2 * PAGE_ALIGN(1280 * 720 * 4 * 2), 0); +} + +#else +void __init rx51_video_mem_init(void) { } +#endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */ diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index b155c366c650..1b86b5bb87a2 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -36,6 +36,7 @@ #define RX51_GPIO_SLEEP_IND 162 struct omap_sdrc_params *rx51_get_sdram_timings(void); +extern void rx51_video_mem_init(void); static struct gpio_led gpio_leds[] = { { @@ -143,6 +144,7 @@ static void __init rx51_init(void) static void __init rx51_map_io(void) { omap2_set_globals_343x(); + rx51_video_mem_init(); omap34xx_map_common_io(); } diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index e15d2e87cfc1..1d7f827b0408 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -82,7 +82,7 @@ static inline void __init zoom_init_smsc911x(void) static struct plat_serial8250_port serial_platform_data[] = { { - .mapbase = 0x10000000, + .mapbase = ZOOM_UART_BASE, .irq = OMAP_GPIO_IRQ(102), .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ, .irqflags = IRQF_SHARED | IRQF_TRIGGER_RISING, diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index 9a26f84b1141..803ef14cbf2d 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -91,8 +91,8 @@ static void __init omap_zoom2_map_io(void) } MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .phys_io = ZOOM_UART_BASE, + .io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_zoom2_map_io, .init_irq = omap_zoom2_init_irq, diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c index cd3e40cf3ac1..33147042485f 100644 --- a/arch/arm/mach-omap2/board-zoom3.c +++ b/arch/arm/mach-omap2/board-zoom3.c @@ -73,8 +73,8 @@ static void __init omap_zoom_init(void) } MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .phys_io = ZOOM_UART_BASE, + .io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_zoom_map_io, .init_irq = omap_zoom_init_irq, diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c index 43d7246ce335..66e01acfd585 100644 --- a/arch/arm/mach-omap2/clkt2xxx_apll.c +++ b/arch/arm/mach-omap2/clkt2xxx_apll.c @@ -70,12 +70,12 @@ static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask) static int omap2_clk_apll96_enable(struct clk *clk) { - return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL); + return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL_MASK); } static int omap2_clk_apll54_enable(struct clk *clk) { - return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL); + return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL_MASK); } /* Stop APLL */ diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index e60ca4e47bbd..aef62918aaf0 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -68,16 +68,13 @@ long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) { const struct prcm_config *ptr; long highest_rate; - long sys_ck_rate; - - sys_ck_rate = clk_get_rate(sclk); highest_rate = -EINVAL; for (ptr = rate_table; ptr->mpu_speed; ptr++) { if (!(ptr->flags & cpu_mask)) continue; - if (ptr->xtal_speed != sys_ck_rate) + if (ptr->xtal_speed != sclk->rate) continue; highest_rate = ptr->mpu_speed; @@ -96,15 +93,12 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) const struct prcm_config *prcm; unsigned long found_speed = 0; unsigned long flags; - long sys_ck_rate; - - sys_ck_rate = clk_get_rate(sclk); for (prcm = rate_table; prcm->mpu_speed; prcm++) { if (!(prcm->flags & cpu_mask)) continue; - if (prcm->xtal_speed != sys_ck_rate) + if (prcm->xtal_speed != sclk->rate) continue; if (prcm->mpu_speed <= rate) { @@ -181,19 +175,16 @@ static struct cpufreq_frequency_table *freq_table; void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) { const struct prcm_config *prcm; - long sys_ck_rate; int i = 0; int tbl_sz = 0; if (!cpu_is_omap24xx()) return; - sys_ck_rate = clk_get_rate(sclk); - for (prcm = rate_table; prcm->mpu_speed; prcm++) { if (!(prcm->flags & cpu_mask)) continue; - if (prcm->xtal_speed != sys_ck_rate) + if (prcm->xtal_speed != sclk->rate) continue; /* don't put bypass rates in table */ @@ -226,7 +217,7 @@ void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) for (prcm = rate_table; prcm->mpu_speed; prcm++) { if (!(prcm->flags & cpu_mask)) continue; - if (prcm->xtal_speed != sys_ck_rate) + if (prcm->xtal_speed != sclk->rate) continue; /* don't put bypass rates in table */ diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c index e50812dd03fd..a781cd6795a4 100644 --- a/arch/arm/mach-omap2/clkt_clksel.c +++ b/arch/arm/mach-omap2/clkt_clksel.c @@ -12,8 +12,26 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * XXX At some point these clksel clocks should be split into - * "divider" clocks and "mux" clocks to better match the hardware. + * + * clksel clocks are clocks that do not have a fixed parent, or that + * can divide their parent's rate, or possibly both at the same time, based + * on the contents of a hardware register bitfield. + * + * All of the various mux and divider settings can be encoded into + * struct clksel* data structures, and then these can be autogenerated + * from some hardware database for each new chip generation. This + * should avoid the need to write, review, and validate a lot of new + * clock code for each new chip, since it can be exported from the SoC + * design flow. This is now done on OMAP4. + * + * The fusion of mux and divider clocks is a software creation. In + * hardware reality, the multiplexer (parent selection) and the + * divider exist separately. XXX At some point these clksel clocks + * should be split into "divider" clocks and "mux" clocks to better + * match the hardware. + * + * (The name "clksel" comes from the name of the corresponding + * register field in the OMAP2/3 family of SoCs.) * * XXX Currently these clocks are only used in the OMAP2/3/4 code, but * many of the OMAP1 clocks should be convertible to use this @@ -29,14 +47,11 @@ #include <plat/clock.h> #include "clock.h" -#include "cm.h" -#include "cm-regbits-24xx.h" -#include "cm-regbits-34xx.h" /* Private functions */ /** - * _omap2_get_clksel_by_parent - return clksel struct for a given clk & parent + * _get_clksel_by_parent() - return clksel struct for a given clk & parent * @clk: OMAP struct clk ptr to inspect * @src_clk: OMAP struct clk ptr of the parent clk to search for * @@ -44,141 +59,217 @@ * the element associated with the supplied parent clock address. * Returns a pointer to the struct clksel on success or NULL on error. */ -static const struct clksel *_omap2_get_clksel_by_parent(struct clk *clk, - struct clk *src_clk) +static const struct clksel *_get_clksel_by_parent(struct clk *clk, + struct clk *src_clk) { const struct clksel *clks; - if (!clk->clksel) - return NULL; - - for (clks = clk->clksel; clks->parent; clks++) { + for (clks = clk->clksel; clks->parent; clks++) if (clks->parent == src_clk) break; /* Found the requested parent */ - } if (!clks->parent) { - printk(KERN_ERR "clock: Could not find parent clock %s in " - "clksel array of clock %s\n", src_clk->name, - clk->name); + /* This indicates a data problem */ + WARN(1, "clock: Could not find parent clock %s in clksel array " + "of clock %s\n", src_clk->name, clk->name); return NULL; } return clks; } -/* - * Converts encoded control register address into a full address - * On error, the return value (parent_div) will be 0. +/** + * _get_div_and_fieldval() - find the new clksel divisor and field value to use + * @src_clk: planned new parent struct clk * + * @clk: struct clk * that is being reparented + * @field_val: pointer to a u32 to contain the register data for the divisor + * + * Given an intended new parent struct clk * @src_clk, and the struct + * clk * @clk to the clock that is being reparented, find the + * appropriate rate divisor for the new clock (returned as the return + * value), and the corresponding register bitfield data to program to + * reach that divisor (returned in the u32 pointed to by @field_val). + * Returns 0 on error, or returns the newly-selected divisor upon + * success (in this latter case, the corresponding register bitfield + * value is passed back in the variable pointed to by @field_val) */ -static u32 _omap2_clksel_get_src_field(struct clk *src_clk, struct clk *clk, - u32 *field_val) +static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk, + u32 *field_val) { const struct clksel *clks; - const struct clksel_rate *clkr; + const struct clksel_rate *clkr, *max_clkr; + u8 max_div = 0; - clks = _omap2_get_clksel_by_parent(clk, src_clk); + clks = _get_clksel_by_parent(clk, src_clk); if (!clks) return 0; + /* + * Find the highest divisor (e.g., the one resulting in the + * lowest rate) to use as the default. This should avoid + * clock rates that are too high for the device. XXX A better + * solution here would be to try to determine if there is a + * divisor matching the original clock rate before the parent + * switch, and if it cannot be found, to fall back to the + * highest divisor. + */ for (clkr = clks->rates; clkr->div; clkr++) { - if (clkr->flags & cpu_mask && clkr->flags & DEFAULT_RATE) - break; /* Found the default rate for this platform */ + if (!(clkr->flags & cpu_mask)) + continue; + + if (clkr->div > max_div) { + max_div = clkr->div; + max_clkr = clkr; + } } - if (!clkr->div) { - printk(KERN_ERR "clock: Could not find default rate for " - "clock %s parent %s\n", clk->name, - src_clk->parent->name); + if (max_div == 0) { + /* This indicates an error in the clksel data */ + WARN(1, "clock: Could not find divisor for clock %s parent %s" + "\n", clk->name, src_clk->parent->name); return 0; } - /* Should never happen. Add a clksel mask to the struct clk. */ - WARN_ON(clk->clksel_mask == 0); + *field_val = max_clkr->val; - *field_val = clkr->val; - - return clkr->div; + return max_div; } +/** + * _write_clksel_reg() - program a clock's clksel register in hardware + * @clk: struct clk * to program + * @v: clksel bitfield value to program (with LSB at bit 0) + * + * Shift the clksel register bitfield value @v to its appropriate + * location in the clksel register and write it in. This function + * will ensure that the write to the clksel_reg reaches its + * destination before returning -- important since PRM and CM register + * accesses can be quite slow compared to ARM cycles -- but does not + * take into account any time the hardware might take to switch the + * clock source. + */ +static void _write_clksel_reg(struct clk *clk, u32 field_val) +{ + u32 v; -/* Public functions */ + v = __raw_readl(clk->clksel_reg); + v &= ~clk->clksel_mask; + v |= field_val << __ffs(clk->clksel_mask); + __raw_writel(v, clk->clksel_reg); + + v = __raw_readl(clk->clksel_reg); /* OCP barrier */ +} /** - * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware - * @clk: OMAP clock struct ptr to use + * _clksel_to_divisor() - turn clksel field value into integer divider + * @clk: OMAP struct clk to use + * @field_val: register field value to find * - * Given a pointer to a source-selectable struct clk, read the hardware - * register and determine what its parent is currently set to. Update the - * clk->parent field with the appropriate clk ptr. + * Given a struct clk of a rate-selectable clksel clock, and a register field + * value to search for, find the corresponding clock divisor. The register + * field value should be pre-masked and shifted down so the LSB is at bit 0 + * before calling. Returns 0 on error or returns the actual integer divisor + * upon success. */ -void omap2_init_clksel_parent(struct clk *clk) +static u32 _clksel_to_divisor(struct clk *clk, u32 field_val) { const struct clksel *clks; const struct clksel_rate *clkr; - u32 r, found = 0; - if (!clk->clksel) - return; + clks = _get_clksel_by_parent(clk, clk->parent); + if (!clks) + return 0; - r = __raw_readl(clk->clksel_reg) & clk->clksel_mask; - r >>= __ffs(clk->clksel_mask); + for (clkr = clks->rates; clkr->div; clkr++) { + if (!(clkr->flags & cpu_mask)) + continue; - for (clks = clk->clksel; clks->parent && !found; clks++) { - for (clkr = clks->rates; clkr->div && !found; clkr++) { - if ((clkr->flags & cpu_mask) && (clkr->val == r)) { - if (clk->parent != clks->parent) { - pr_debug("clock: inited %s parent " - "to %s (was %s)\n", - clk->name, clks->parent->name, - ((clk->parent) ? - clk->parent->name : "NULL")); - clk_reparent(clk, clks->parent); - }; - found = 1; - } - } + if (clkr->val == field_val) + break; } - if (!found) - printk(KERN_ERR "clock: init parent: could not find " - "regval %0x for clock %s\n", r, clk->name); + if (!clkr->div) { + /* This indicates a data error */ + WARN(1, "clock: Could not find fieldval %d for clock %s parent " + "%s\n", field_val, clk->name, clk->parent->name); + return 0; + } - return; + return clkr->div; } -/* - * Used for clocks that are part of CLKSEL_xyz governed clocks. - * REVISIT: Maybe change to use clk->enable() functions like on omap1? +/** + * _divisor_to_clksel() - turn clksel integer divisor into a field value + * @clk: OMAP struct clk to use + * @div: integer divisor to search for + * + * Given a struct clk of a rate-selectable clksel clock, and a clock + * divisor, find the corresponding register field value. Returns the + * register field value _before_ left-shifting (i.e., LSB is at bit + * 0); or returns 0xFFFFFFFF (~0) upon error. */ -unsigned long omap2_clksel_recalc(struct clk *clk) +static u32 _divisor_to_clksel(struct clk *clk, u32 div) { - unsigned long rate; - u32 div = 0; + const struct clksel *clks; + const struct clksel_rate *clkr; - pr_debug("clock: recalc'ing clksel clk %s\n", clk->name); + /* should never happen */ + WARN_ON(div == 0); - div = omap2_clksel_get_divisor(clk); - if (div == 0) - return clk->rate; + clks = _get_clksel_by_parent(clk, clk->parent); + if (!clks) + return ~0; - rate = clk->parent->rate / div; + for (clkr = clks->rates; clkr->div; clkr++) { + if (!(clkr->flags & cpu_mask)) + continue; - pr_debug("clock: new clock rate is %ld (div %d)\n", rate, div); + if (clkr->div == div) + break; + } - return rate; + if (!clkr->div) { + pr_err("clock: Could not find divisor %d for clock %s parent " + "%s\n", div, clk->name, clk->parent->name); + return ~0; + } + + return clkr->val; +} + +/** + * _read_divisor() - get current divisor applied to parent clock (from hdwr) + * @clk: OMAP struct clk to use. + * + * Read the current divisor register value for @clk that is programmed + * into the hardware, convert it into the actual divisor value, and + * return it; or return 0 on error. + */ +static u32 _read_divisor(struct clk *clk) +{ + u32 v; + + if (!clk->clksel || !clk->clksel_mask) + return 0; + + v = __raw_readl(clk->clksel_reg); + v &= clk->clksel_mask; + v >>= __ffs(clk->clksel_mask); + + return _clksel_to_divisor(clk, v); } +/* Public functions */ + /** - * omap2_clksel_round_rate_div - find divisor for the given clock and rate + * omap2_clksel_round_rate_div() - find divisor for the given clock and rate * @clk: OMAP struct clk to use * @target_rate: desired clock rate * @new_div: ptr to where we should store the divisor * * Finds 'best' divider value in an array based on the source and target * rates. The divider array must be sorted with smallest divider first. - * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT, - * they are only settable as part of virtual_prcm set. + * This function is also used by the DPLL3 M2 divider code. * * Returns the rounded clock rate or returns 0xffffffff on error. */ @@ -190,12 +281,15 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, const struct clksel_rate *clkr; u32 last_div = 0; + if (!clk->clksel || !clk->clksel_mask) + return ~0; + pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n", clk->name, target_rate); *new_div = 1; - clks = _omap2_get_clksel_by_parent(clk, clk->parent); + clks = _get_clksel_by_parent(clk, clk->parent); if (!clks) return ~0; @@ -231,168 +325,174 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, return clk->parent->rate / clkr->div; } -/** - * omap2_clksel_round_rate - find rounded rate for the given clock and rate - * @clk: OMAP struct clk to use - * @target_rate: desired clock rate - * - * Compatibility wrapper for OMAP clock framework - * Finds best target rate based on the source clock and possible dividers. - * rates. The divider array must be sorted with smallest divider first. - * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT, - * they are only settable as part of virtual_prcm set. - * - * Returns the rounded clock rate or returns 0xffffffff on error. +/* + * Clocktype interface functions to the OMAP clock code + * (i.e., those used in struct clk field function pointers, etc.) */ -long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate) -{ - u32 new_div; - - return omap2_clksel_round_rate_div(clk, target_rate, &new_div); -} - - -/* Given a clock and a rate apply a clock specific rounding function */ -long omap2_clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (clk->round_rate) - return clk->round_rate(clk, rate); - - return clk->rate; -} /** - * omap2_clksel_to_divisor() - turn clksel field value into integer divider - * @clk: OMAP struct clk to use - * @field_val: register field value to find + * omap2_init_clksel_parent() - set a clksel clk's parent field from the hdwr + * @clk: OMAP clock struct ptr to use * - * Given a struct clk of a rate-selectable clksel clock, and a register field - * value to search for, find the corresponding clock divisor. The register - * field value should be pre-masked and shifted down so the LSB is at bit 0 - * before calling. Returns 0 on error + * Given a pointer @clk to a source-selectable struct clk, read the + * hardware register and determine what its parent is currently set + * to. Update @clk's .parent field with the appropriate clk ptr. No + * return value. */ -u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val) +void omap2_init_clksel_parent(struct clk *clk) { const struct clksel *clks; const struct clksel_rate *clkr; + u32 r, found = 0; - clks = _omap2_get_clksel_by_parent(clk, clk->parent); - if (!clks) - return 0; + if (!clk->clksel || !clk->clksel_mask) + return; - for (clkr = clks->rates; clkr->div; clkr++) { - if ((clkr->flags & cpu_mask) && (clkr->val == field_val)) - break; - } + r = __raw_readl(clk->clksel_reg) & clk->clksel_mask; + r >>= __ffs(clk->clksel_mask); - if (!clkr->div) { - printk(KERN_ERR "clock: Could not find fieldval %d for " - "clock %s parent %s\n", field_val, clk->name, - clk->parent->name); - return 0; + for (clks = clk->clksel; clks->parent && !found; clks++) { + for (clkr = clks->rates; clkr->div && !found; clkr++) { + if (!(clkr->flags & cpu_mask)) + continue; + + if (clkr->val == r) { + if (clk->parent != clks->parent) { + pr_debug("clock: inited %s parent " + "to %s (was %s)\n", + clk->name, clks->parent->name, + ((clk->parent) ? + clk->parent->name : "NULL")); + clk_reparent(clk, clks->parent); + }; + found = 1; + } + } } - return clkr->div; + /* This indicates a data error */ + WARN(!found, "clock: %s: init parent: could not find regval %0x\n", + clk->name, r); + + return; } /** - * omap2_divisor_to_clksel() - turn clksel integer divisor into a field value - * @clk: OMAP struct clk to use - * @div: integer divisor to search for + * omap2_clksel_recalc() - function ptr to pass via struct clk .recalc field + * @clk: struct clk * * - * Given a struct clk of a rate-selectable clksel clock, and a clock divisor, - * find the corresponding register field value. The return register value is - * the value before left-shifting. Returns ~0 on error + * This function is intended to be called only by the clock framework. + * Each clksel clock should have its struct clk .recalc field set to this + * function. Returns the clock's current rate, based on its parent's rate + * and its current divisor setting in the hardware. */ -u32 omap2_divisor_to_clksel(struct clk *clk, u32 div) +unsigned long omap2_clksel_recalc(struct clk *clk) { - const struct clksel *clks; - const struct clksel_rate *clkr; - - /* should never happen */ - WARN_ON(div == 0); + unsigned long rate; + u32 div = 0; - clks = _omap2_get_clksel_by_parent(clk, clk->parent); - if (!clks) - return ~0; + div = _read_divisor(clk); + if (div == 0) + return clk->rate; - for (clkr = clks->rates; clkr->div; clkr++) { - if ((clkr->flags & cpu_mask) && (clkr->div == div)) - break; - } + rate = clk->parent->rate / div; - if (!clkr->div) { - printk(KERN_ERR "clock: Could not find divisor %d for " - "clock %s parent %s\n", div, clk->name, - clk->parent->name); - return ~0; - } + pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n", clk->name, + rate, div); - return clkr->val; + return rate; } /** - * omap2_clksel_get_divisor - get current divider applied to parent clock. - * @clk: OMAP struct clk to use. + * omap2_clksel_round_rate() - find rounded rate for the given clock and rate + * @clk: OMAP struct clk to use + * @target_rate: desired clock rate + * + * This function is intended to be called only by the clock framework. + * Finds best target rate based on the source clock and possible dividers. + * rates. The divider array must be sorted with smallest divider first. * - * Returns the integer divisor upon success or 0 on error. + * Returns the rounded clock rate or returns 0xffffffff on error. */ -u32 omap2_clksel_get_divisor(struct clk *clk) +long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate) { - u32 v; - - if (!clk->clksel_mask) - return 0; - - v = __raw_readl(clk->clksel_reg) & clk->clksel_mask; - v >>= __ffs(clk->clksel_mask); + u32 new_div; - return omap2_clksel_to_divisor(clk, v); + return omap2_clksel_round_rate_div(clk, target_rate, &new_div); } +/** + * omap2_clksel_set_rate() - program clock rate in hardware + * @clk: struct clk * to program rate + * @rate: target rate to program + * + * This function is intended to be called only by the clock framework. + * Program @clk's rate to @rate in the hardware. The clock can be + * either enabled or disabled when this happens, although if the clock + * is enabled, some downstream devices may glitch or behave + * unpredictably when the clock rate is changed - this depends on the + * hardware. This function does not currently check the usecount of + * the clock, so if multiple drivers are using the clock, and the rate + * is changed, they will all be affected without any notification. + * Returns -EINVAL upon error, or 0 upon success. + */ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate) { - u32 v, field_val, validrate, new_div = 0; + u32 field_val, validrate, new_div = 0; - if (!clk->clksel_mask) + if (!clk->clksel || !clk->clksel_mask) return -EINVAL; validrate = omap2_clksel_round_rate_div(clk, rate, &new_div); if (validrate != rate) return -EINVAL; - field_val = omap2_divisor_to_clksel(clk, new_div); + field_val = _divisor_to_clksel(clk, new_div); if (field_val == ~0) return -EINVAL; - v = __raw_readl(clk->clksel_reg); - v &= ~clk->clksel_mask; - v |= field_val << __ffs(clk->clksel_mask); - __raw_writel(v, clk->clksel_reg); - v = __raw_readl(clk->clksel_reg); /* OCP barrier */ + _write_clksel_reg(clk, field_val); clk->rate = clk->parent->rate / new_div; + pr_debug("clock: %s: set rate to %ld\n", clk->name, clk->rate); + return 0; } +/* + * Clksel parent setting function - not passed in struct clk function + * pointer - instead, the OMAP clock code currently assumes that any + * parent-setting clock is a clksel clock, and calls + * omap2_clksel_set_parent() by default + */ + +/** + * omap2_clksel_set_parent() - change a clock's parent clock + * @clk: struct clk * of the child clock + * @new_parent: struct clk * of the new parent clock + * + * This function is intended to be called only by the clock framework. + * Change the parent clock of clock @clk to @new_parent. This is + * intended to be used while @clk is disabled. This function does not + * currently check the usecount of the clock, so if multiple drivers + * are using the clock, and the parent is changed, they will all be + * affected without any notification. Returns -EINVAL upon error, or + * 0 upon success. + */ int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent) { - u32 field_val, v, parent_div; + u32 field_val = 0; + u32 parent_div; - if (!clk->clksel) + if (!clk->clksel || !clk->clksel_mask) return -EINVAL; - parent_div = _omap2_clksel_get_src_field(new_parent, clk, &field_val); + parent_div = _get_div_and_fieldval(new_parent, clk, &field_val); if (!parent_div) return -EINVAL; - /* Set new source value (previous dividers if any in effect) */ - v = __raw_readl(clk->clksel_reg); - v &= ~clk->clksel_mask; - v |= field_val << __ffs(clk->clksel_mask); - __raw_writel(v, clk->clksel_reg); - v = __raw_readl(clk->clksel_reg); /* OCP barrier */ + _write_clksel_reg(clk, field_val); clk_reparent(clk, new_parent); @@ -402,7 +502,7 @@ int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent) if (parent_div > 0) clk->rate /= parent_div; - pr_debug("clock: set parent of %s to %s (new rate %ld)\n", + pr_debug("clock: %s: set parent to %s (new rate %ld)\n", clk->name, clk->parent->name, clk->rate); return 0; diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index a6d0b34b7990..605f531783a8 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -334,6 +334,15 @@ oce_err1: return ret; } +/* Given a clock and a rate apply a clock specific rounding function */ +long omap2_clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (clk->round_rate) + return clk->round_rate(clk, rate); + + return clk->rate; +} + /* Set the clock rate for a clock source */ int omap2_clk_set_rate(struct clk *clk, unsigned long rate) { diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index ad8a1f7c1afc..a535c7a2a62a 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -73,19 +73,20 @@ void omap2_clk_disable_unused(struct clk *clk); #define omap2_clk_disable_unused NULL #endif -unsigned long omap2_clksel_recalc(struct clk *clk); void omap2_init_clk_clkdm(struct clk *clk); -void omap2_init_clksel_parent(struct clk *clk); -u32 omap2_clksel_get_divisor(struct clk *clk); + +/* clkt_clksel.c public functions */ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, u32 *new_div); -u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val); -u32 omap2_divisor_to_clksel(struct clk *clk, u32 div); +void omap2_init_clksel_parent(struct clk *clk); +unsigned long omap2_clksel_recalc(struct clk *clk); long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate); int omap2_clksel_set_rate(struct clk *clk, unsigned long rate); int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent); + u32 omap2_get_dpll_rate(struct clk *clk); void omap2_init_dpll_parent(struct clk *clk); + int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name); diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index d932b142d0b6..37d65d62ed8f 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -155,12 +155,12 @@ static struct clk apll54_ck = { /* func_54m_ck */ static const struct clksel_rate func_54m_apll54_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 0, .flags = RATE_IN_24XX }, { .div = 0 }, }; static const struct clksel_rate func_54m_alt_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, { .div = 0 }, }; @@ -177,7 +177,7 @@ static struct clk func_54m_ck = { .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP24XX_54M_SOURCE, + .clksel_mask = OMAP24XX_54M_SOURCE_MASK, .clksel = func_54m_clksel, .recalc = &omap2_clksel_recalc, }; @@ -201,12 +201,12 @@ static struct clk func_96m_ck = { /* func_48m_ck */ static const struct clksel_rate func_48m_apll96_rates[] = { - { .div = 2, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 2, .val = 0, .flags = RATE_IN_24XX }, { .div = 0 }, }; static const struct clksel_rate func_48m_alt_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, { .div = 0 }, }; @@ -223,7 +223,7 @@ static struct clk func_48m_ck = { .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP24XX_48M_SOURCE, + .clksel_mask = OMAP24XX_48M_SOURCE_MASK, .clksel = func_48m_clksel, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, @@ -256,22 +256,22 @@ static struct clk wdt1_osc_ck = { * flags fields, which mark them as 2420-only. */ static const struct clksel_rate common_clkout_src_core_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 0, .flags = RATE_IN_24XX }, { .div = 0 } }; static const struct clksel_rate common_clkout_src_sys_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, { .div = 0 } }; static const struct clksel_rate common_clkout_src_96m_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 2, .flags = RATE_IN_24XX }, { .div = 0 } }; static const struct clksel_rate common_clkout_src_54m_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 3, .flags = RATE_IN_24XX }, { .div = 0 } }; @@ -300,7 +300,7 @@ static struct clk sys_clkout_src = { }; static const struct clksel_rate common_clkout_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 0, .flags = RATE_IN_24XX }, { .div = 2, .val = 1, .flags = RATE_IN_24XX }, { .div = 4, .val = 2, .flags = RATE_IN_24XX }, { .div = 8, .val = 3, .flags = RATE_IN_24XX }, @@ -384,7 +384,7 @@ static struct clk emul_ck = { * */ static const struct clksel_rate mpu_core_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, { .div = 2, .val = 2, .flags = RATE_IN_24XX }, { .div = 4, .val = 4, .flags = RATE_IN_242X }, { .div = 6, .val = 6, .flags = RATE_IN_242X }, @@ -420,7 +420,7 @@ static struct clk mpu_ck = { /* Control cpu */ * routed into a synchronizer and out of clocks abc. */ static const struct clksel_rate dsp_fck_core_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, { .div = 2, .val = 2, .flags = RATE_IN_24XX }, { .div = 3, .val = 3, .flags = RATE_IN_24XX }, { .div = 4, .val = 4, .flags = RATE_IN_24XX }, @@ -450,7 +450,7 @@ static struct clk dsp_fck = { /* DSP interface clock */ static const struct clksel_rate dsp_irate_ick_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, { .div = 2, .val = 2, .flags = RATE_IN_24XX }, { .div = 0 }, }; @@ -532,7 +532,7 @@ static struct clk iva1_mpu_int_ifck = { static const struct clksel_rate core_l3_core_rates[] = { { .div = 1, .val = 1, .flags = RATE_IN_24XX }, { .div = 2, .val = 2, .flags = RATE_IN_242X }, - { .div = 4, .val = 4, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 4, .val = 4, .flags = RATE_IN_24XX }, { .div = 6, .val = 6, .flags = RATE_IN_24XX }, { .div = 8, .val = 8, .flags = RATE_IN_242X }, { .div = 12, .val = 12, .flags = RATE_IN_242X }, @@ -559,7 +559,7 @@ static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */ /* usb_l4_ick */ static const struct clksel_rate usb_l4_ick_core_l3_rates[] = { { .div = 1, .val = 1, .flags = RATE_IN_24XX }, - { .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_24XX }, { .div = 4, .val = 4, .flags = RATE_IN_24XX }, { .div = 0 } }; @@ -591,7 +591,7 @@ static struct clk usb_l4_ick = { /* FS-USB interface clock */ * this domain. */ static const struct clksel_rate l4_core_l3_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, { .div = 2, .val = 2, .flags = RATE_IN_24XX }, { .div = 0 } }; @@ -622,7 +622,7 @@ static struct clk l4_ck = { /* used both as an ick and fck */ */ static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = { { .div = 1, .val = 1, .flags = RATE_IN_24XX }, - { .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_24XX }, { .div = 3, .val = 3, .flags = RATE_IN_24XX }, { .div = 4, .val = 4, .flags = RATE_IN_24XX }, { .div = 6, .val = 6, .flags = RATE_IN_242X }, @@ -730,7 +730,7 @@ static struct clk gfx_ick = { /* XXX Add RATE_NOT_VALIDATED */ static const struct clksel_rate dss1_fck_sys_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 0, .flags = RATE_IN_24XX }, { .div = 0 } }; @@ -744,7 +744,7 @@ static const struct clksel_rate dss1_fck_core_rates[] = { { .div = 8, .val = 8, .flags = RATE_IN_24XX }, { .div = 9, .val = 9, .flags = RATE_IN_24XX }, { .div = 12, .val = 12, .flags = RATE_IN_24XX }, - { .div = 16, .val = 16, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 16, .val = 16, .flags = RATE_IN_24XX }, { .div = 0 } }; @@ -779,12 +779,12 @@ static struct clk dss1_fck = { }; static const struct clksel_rate dss2_fck_sys_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 0, .flags = RATE_IN_24XX }, { .div = 0 } }; static const struct clksel_rate dss2_fck_48m_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, { .div = 0 } }; @@ -825,7 +825,7 @@ static struct clk dss_54m_fck = { /* Alt clk used in power management */ * functional clock parents. */ static const struct clksel_rate gpt_alt_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 2, .flags = RATE_IN_24XX }, { .div = 0 } }; @@ -1588,7 +1588,7 @@ static struct clk vlynq_ick = { }; static const struct clksel_rate vlynq_fck_96m_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_242X | DEFAULT_RATE }, + { .div = 1, .val = 0, .flags = RATE_IN_242X }, { .div = 0 } }; @@ -1601,7 +1601,7 @@ static const struct clksel_rate vlynq_fck_core_rates[] = { { .div = 8, .val = 8, .flags = RATE_IN_242X }, { .div = 9, .val = 9, .flags = RATE_IN_242X }, { .div = 12, .val = 12, .flags = RATE_IN_242X }, - { .div = 16, .val = 16, .flags = RATE_IN_242X | DEFAULT_RATE }, + { .div = 16, .val = 16, .flags = RATE_IN_242X }, { .div = 18, .val = 18, .flags = RATE_IN_242X }, { .div = 0 } }; @@ -1836,7 +1836,7 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X), CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X), CLK(NULL, "des_ick", &des_ick, CK_242X), - CLK(NULL, "sha_ick", &sha_ick, CK_242X), + CLK("omap-sham", "ick", &sha_ick, CK_242X), CLK("omap_rng", "ick", &rng_ick, CK_242X), CLK(NULL, "aes_ick", &aes_ick, CK_242X), CLK(NULL, "pka_ick", &pka_ick, CK_242X), diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index 0438b6e4f51a..b33118fb6a87 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -155,12 +155,12 @@ static struct clk apll54_ck = { /* func_54m_ck */ static const struct clksel_rate func_54m_apll54_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 0, .flags = RATE_IN_24XX }, { .div = 0 }, }; static const struct clksel_rate func_54m_alt_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, { .div = 0 }, }; @@ -177,7 +177,7 @@ static struct clk func_54m_ck = { .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP24XX_54M_SOURCE, + .clksel_mask = OMAP24XX_54M_SOURCE_MASK, .clksel = func_54m_clksel, .recalc = &omap2_clksel_recalc, }; @@ -192,12 +192,12 @@ static struct clk core_ck = { /* func_96m_ck */ static const struct clksel_rate func_96m_apll96_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 0, .flags = RATE_IN_24XX }, { .div = 0 }, }; static const struct clksel_rate func_96m_alt_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_243X | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_243X }, { .div = 0 }, }; @@ -214,7 +214,7 @@ static struct clk func_96m_ck = { .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP2430_96M_SOURCE, + .clksel_mask = OMAP2430_96M_SOURCE_MASK, .clksel = func_96m_clksel, .recalc = &omap2_clksel_recalc, }; @@ -222,12 +222,12 @@ static struct clk func_96m_ck = { /* func_48m_ck */ static const struct clksel_rate func_48m_apll96_rates[] = { - { .div = 2, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 2, .val = 0, .flags = RATE_IN_24XX }, { .div = 0 }, }; static const struct clksel_rate func_48m_alt_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, { .div = 0 }, }; @@ -244,7 +244,7 @@ static struct clk func_48m_ck = { .clkdm_name = "wkup_clkdm", .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP24XX_48M_SOURCE, + .clksel_mask = OMAP24XX_48M_SOURCE_MASK, .clksel = func_48m_clksel, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, @@ -277,22 +277,22 @@ static struct clk wdt1_osc_ck = { * flags fields, which mark them as 2420-only. */ static const struct clksel_rate common_clkout_src_core_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 0, .flags = RATE_IN_24XX }, { .div = 0 } }; static const struct clksel_rate common_clkout_src_sys_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, { .div = 0 } }; static const struct clksel_rate common_clkout_src_96m_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 2, .flags = RATE_IN_24XX }, { .div = 0 } }; static const struct clksel_rate common_clkout_src_54m_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 3, .flags = RATE_IN_24XX }, { .div = 0 } }; @@ -321,7 +321,7 @@ static struct clk sys_clkout_src = { }; static const struct clksel_rate common_clkout_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 0, .flags = RATE_IN_24XX }, { .div = 2, .val = 1, .flags = RATE_IN_24XX }, { .div = 4, .val = 2, .flags = RATE_IN_24XX }, { .div = 8, .val = 3, .flags = RATE_IN_24XX }, @@ -369,7 +369,7 @@ static struct clk emul_ck = { * */ static const struct clksel_rate mpu_core_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, { .div = 2, .val = 2, .flags = RATE_IN_24XX }, { .div = 0 }, }; @@ -402,7 +402,7 @@ static struct clk mpu_ck = { /* Control cpu */ * routed into a synchronizer and out of clocks abc. */ static const struct clksel_rate dsp_fck_core_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, { .div = 2, .val = 2, .flags = RATE_IN_24XX }, { .div = 3, .val = 3, .flags = RATE_IN_24XX }, { .div = 4, .val = 4, .flags = RATE_IN_24XX }, @@ -429,7 +429,7 @@ static struct clk dsp_fck = { /* DSP interface clock */ static const struct clksel_rate dsp_irate_ick_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, { .div = 2, .val = 2, .flags = RATE_IN_24XX }, { .div = 3, .val = 3, .flags = RATE_IN_243X }, { .div = 0 }, @@ -481,7 +481,7 @@ static struct clk iva2_1_ick = { */ static const struct clksel_rate core_l3_core_rates[] = { { .div = 1, .val = 1, .flags = RATE_IN_24XX }, - { .div = 4, .val = 4, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 4, .val = 4, .flags = RATE_IN_24XX }, { .div = 6, .val = 6, .flags = RATE_IN_24XX }, { .div = 0 } }; @@ -505,7 +505,7 @@ static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */ /* usb_l4_ick */ static const struct clksel_rate usb_l4_ick_core_l3_rates[] = { { .div = 1, .val = 1, .flags = RATE_IN_24XX }, - { .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_24XX }, { .div = 4, .val = 4, .flags = RATE_IN_24XX }, { .div = 0 } }; @@ -537,7 +537,7 @@ static struct clk usb_l4_ick = { /* FS-USB interface clock */ * this domain. */ static const struct clksel_rate l4_core_l3_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, { .div = 2, .val = 2, .flags = RATE_IN_24XX }, { .div = 0 } }; @@ -568,7 +568,7 @@ static struct clk l4_ck = { /* used both as an ick and fck */ */ static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = { { .div = 1, .val = 1, .flags = RATE_IN_24XX }, - { .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_24XX }, { .div = 3, .val = 3, .flags = RATE_IN_24XX }, { .div = 4, .val = 4, .flags = RATE_IN_24XX }, { .div = 5, .val = 5, .flags = RATE_IN_243X }, @@ -673,7 +673,7 @@ static struct clk gfx_ick = { */ static const struct clksel_rate mdm_ick_core_rates[] = { { .div = 1, .val = 1, .flags = RATE_IN_243X }, - { .div = 4, .val = 4, .flags = RATE_IN_243X | DEFAULT_RATE }, + { .div = 4, .val = 4, .flags = RATE_IN_243X }, { .div = 6, .val = 6, .flags = RATE_IN_243X }, { .div = 9, .val = 9, .flags = RATE_IN_243X }, { .div = 0 } @@ -718,7 +718,7 @@ static struct clk mdm_osc_ck = { /* XXX Add RATE_NOT_VALIDATED */ static const struct clksel_rate dss1_fck_sys_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 0, .flags = RATE_IN_24XX }, { .div = 0 } }; @@ -732,7 +732,7 @@ static const struct clksel_rate dss1_fck_core_rates[] = { { .div = 8, .val = 8, .flags = RATE_IN_24XX }, { .div = 9, .val = 9, .flags = RATE_IN_24XX }, { .div = 12, .val = 12, .flags = RATE_IN_24XX }, - { .div = 16, .val = 16, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 16, .val = 16, .flags = RATE_IN_24XX }, { .div = 0 } }; @@ -767,12 +767,12 @@ static struct clk dss1_fck = { }; static const struct clksel_rate dss2_fck_sys_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 0, .flags = RATE_IN_24XX }, { .div = 0 } }; static const struct clksel_rate dss2_fck_48m_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, { .div = 0 } }; @@ -813,7 +813,7 @@ static struct clk dss_54m_fck = { /* Alt clk used in power management */ * functional clock parents. */ static const struct clksel_rate gpt_alt_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE }, + { .div = 1, .val = 2, .flags = RATE_IN_24XX }, { .div = 0 } }; @@ -1924,7 +1924,7 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "sdma_ick", &sdma_ick, CK_243X), CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X), CLK(NULL, "des_ick", &des_ick, CK_243X), - CLK(NULL, "sha_ick", &sha_ick, CK_243X), + CLK("omap-sham", "ick", &sha_ick, CK_243X), CLK("omap_rng", "ick", &rng_ick, CK_243X), CLK(NULL, "aes_ick", &aes_ick, CK_243X), CLK(NULL, "pka_ick", &pka_ick, CK_243X), diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 9cba5560519b..41b155acfca7 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -110,32 +110,32 @@ static struct clk virt_38_4m_ck = { }; static const struct clksel_rate osc_sys_12m_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 0, .flags = RATE_IN_3XXX }, { .div = 0 } }; static const struct clksel_rate osc_sys_13m_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, { .div = 0 } }; static const struct clksel_rate osc_sys_16_8m_rates[] = { - { .div = 1, .val = 5, .flags = RATE_IN_3430ES2 | DEFAULT_RATE }, + { .div = 1, .val = 5, .flags = RATE_IN_3430ES2PLUS }, { .div = 0 } }; static const struct clksel_rate osc_sys_19_2m_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 2, .flags = RATE_IN_3XXX }, { .div = 0 } }; static const struct clksel_rate osc_sys_26m_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 3, .flags = RATE_IN_3XXX }, { .div = 0 } }; static const struct clksel_rate osc_sys_38_4m_rates[] = { - { .div = 1, .val = 4, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 4, .flags = RATE_IN_3XXX }, { .div = 0 } }; @@ -163,8 +163,8 @@ static struct clk osc_sys_ck = { }; static const struct clksel_rate div2_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, + { .div = 2, .val = 2, .flags = RATE_IN_3XXX }, { .div = 0 } }; @@ -213,42 +213,42 @@ static struct clk sys_clkout1 = { /* CM CLOCKS */ static const struct clksel_rate div16_dpll_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 3, .val = 3, .flags = RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 5, .val = 5, .flags = RATE_IN_343X }, - { .div = 6, .val = 6, .flags = RATE_IN_343X }, - { .div = 7, .val = 7, .flags = RATE_IN_343X }, - { .div = 8, .val = 8, .flags = RATE_IN_343X }, - { .div = 9, .val = 9, .flags = RATE_IN_343X }, - { .div = 10, .val = 10, .flags = RATE_IN_343X }, - { .div = 11, .val = 11, .flags = RATE_IN_343X }, - { .div = 12, .val = 12, .flags = RATE_IN_343X }, - { .div = 13, .val = 13, .flags = RATE_IN_343X }, - { .div = 14, .val = 14, .flags = RATE_IN_343X }, - { .div = 15, .val = 15, .flags = RATE_IN_343X }, - { .div = 16, .val = 16, .flags = RATE_IN_343X }, + { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, + { .div = 2, .val = 2, .flags = RATE_IN_3XXX }, + { .div = 3, .val = 3, .flags = RATE_IN_3XXX }, + { .div = 4, .val = 4, .flags = RATE_IN_3XXX }, + { .div = 5, .val = 5, .flags = RATE_IN_3XXX }, + { .div = 6, .val = 6, .flags = RATE_IN_3XXX }, + { .div = 7, .val = 7, .flags = RATE_IN_3XXX }, + { .div = 8, .val = 8, .flags = RATE_IN_3XXX }, + { .div = 9, .val = 9, .flags = RATE_IN_3XXX }, + { .div = 10, .val = 10, .flags = RATE_IN_3XXX }, + { .div = 11, .val = 11, .flags = RATE_IN_3XXX }, + { .div = 12, .val = 12, .flags = RATE_IN_3XXX }, + { .div = 13, .val = 13, .flags = RATE_IN_3XXX }, + { .div = 14, .val = 14, .flags = RATE_IN_3XXX }, + { .div = 15, .val = 15, .flags = RATE_IN_3XXX }, + { .div = 16, .val = 16, .flags = RATE_IN_3XXX }, { .div = 0 } }; -static const struct clksel_rate div32_dpll4_rates_3630[] = { - { .div = 1, .val = 1, .flags = RATE_IN_36XX | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_36XX }, - { .div = 3, .val = 3, .flags = RATE_IN_36XX }, - { .div = 4, .val = 4, .flags = RATE_IN_36XX }, - { .div = 5, .val = 5, .flags = RATE_IN_36XX }, - { .div = 6, .val = 6, .flags = RATE_IN_36XX }, - { .div = 7, .val = 7, .flags = RATE_IN_36XX }, - { .div = 8, .val = 8, .flags = RATE_IN_36XX }, - { .div = 9, .val = 9, .flags = RATE_IN_36XX }, - { .div = 10, .val = 10, .flags = RATE_IN_36XX }, - { .div = 11, .val = 11, .flags = RATE_IN_36XX }, - { .div = 12, .val = 12, .flags = RATE_IN_36XX }, - { .div = 13, .val = 13, .flags = RATE_IN_36XX }, - { .div = 14, .val = 14, .flags = RATE_IN_36XX }, - { .div = 15, .val = 15, .flags = RATE_IN_36XX }, - { .div = 16, .val = 16, .flags = RATE_IN_36XX }, +static const struct clksel_rate dpll4_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, + { .div = 2, .val = 2, .flags = RATE_IN_3XXX }, + { .div = 3, .val = 3, .flags = RATE_IN_3XXX }, + { .div = 4, .val = 4, .flags = RATE_IN_3XXX }, + { .div = 5, .val = 5, .flags = RATE_IN_3XXX }, + { .div = 6, .val = 6, .flags = RATE_IN_3XXX }, + { .div = 7, .val = 7, .flags = RATE_IN_3XXX }, + { .div = 8, .val = 8, .flags = RATE_IN_3XXX }, + { .div = 9, .val = 9, .flags = RATE_IN_3XXX }, + { .div = 10, .val = 10, .flags = RATE_IN_3XXX }, + { .div = 11, .val = 11, .flags = RATE_IN_3XXX }, + { .div = 12, .val = 12, .flags = RATE_IN_3XXX }, + { .div = 13, .val = 13, .flags = RATE_IN_3XXX }, + { .div = 14, .val = 14, .flags = RATE_IN_3XXX }, + { .div = 15, .val = 15, .flags = RATE_IN_3XXX }, + { .div = 16, .val = 16, .flags = RATE_IN_3XXX }, { .div = 17, .val = 17, .flags = RATE_IN_36XX }, { .div = 18, .val = 18, .flags = RATE_IN_36XX }, { .div = 19, .val = 19, .flags = RATE_IN_36XX }, @@ -450,37 +450,37 @@ static struct clk dpll3_x2_ck = { }; static const struct clksel_rate div31_dpll3_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 3, .val = 3, .flags = RATE_IN_3430ES2 }, - { .div = 4, .val = 4, .flags = RATE_IN_3430ES2 }, - { .div = 5, .val = 5, .flags = RATE_IN_3430ES2 }, - { .div = 6, .val = 6, .flags = RATE_IN_3430ES2 }, - { .div = 7, .val = 7, .flags = RATE_IN_3430ES2 }, - { .div = 8, .val = 8, .flags = RATE_IN_3430ES2 }, - { .div = 9, .val = 9, .flags = RATE_IN_3430ES2 }, - { .div = 10, .val = 10, .flags = RATE_IN_3430ES2 }, - { .div = 11, .val = 11, .flags = RATE_IN_3430ES2 }, - { .div = 12, .val = 12, .flags = RATE_IN_3430ES2 }, - { .div = 13, .val = 13, .flags = RATE_IN_3430ES2 }, - { .div = 14, .val = 14, .flags = RATE_IN_3430ES2 }, - { .div = 15, .val = 15, .flags = RATE_IN_3430ES2 }, - { .div = 16, .val = 16, .flags = RATE_IN_3430ES2 }, - { .div = 17, .val = 17, .flags = RATE_IN_3430ES2 }, - { .div = 18, .val = 18, .flags = RATE_IN_3430ES2 }, - { .div = 19, .val = 19, .flags = RATE_IN_3430ES2 }, - { .div = 20, .val = 20, .flags = RATE_IN_3430ES2 }, - { .div = 21, .val = 21, .flags = RATE_IN_3430ES2 }, - { .div = 22, .val = 22, .flags = RATE_IN_3430ES2 }, - { .div = 23, .val = 23, .flags = RATE_IN_3430ES2 }, - { .div = 24, .val = 24, .flags = RATE_IN_3430ES2 }, - { .div = 25, .val = 25, .flags = RATE_IN_3430ES2 }, - { .div = 26, .val = 26, .flags = RATE_IN_3430ES2 }, - { .div = 27, .val = 27, .flags = RATE_IN_3430ES2 }, - { .div = 28, .val = 28, .flags = RATE_IN_3430ES2 }, - { .div = 29, .val = 29, .flags = RATE_IN_3430ES2 }, - { .div = 30, .val = 30, .flags = RATE_IN_3430ES2 }, - { .div = 31, .val = 31, .flags = RATE_IN_3430ES2 }, + { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, + { .div = 2, .val = 2, .flags = RATE_IN_3XXX }, + { .div = 3, .val = 3, .flags = RATE_IN_3430ES2PLUS }, + { .div = 4, .val = 4, .flags = RATE_IN_3430ES2PLUS }, + { .div = 5, .val = 5, .flags = RATE_IN_3430ES2PLUS }, + { .div = 6, .val = 6, .flags = RATE_IN_3430ES2PLUS }, + { .div = 7, .val = 7, .flags = RATE_IN_3430ES2PLUS }, + { .div = 8, .val = 8, .flags = RATE_IN_3430ES2PLUS }, + { .div = 9, .val = 9, .flags = RATE_IN_3430ES2PLUS }, + { .div = 10, .val = 10, .flags = RATE_IN_3430ES2PLUS }, + { .div = 11, .val = 11, .flags = RATE_IN_3430ES2PLUS }, + { .div = 12, .val = 12, .flags = RATE_IN_3430ES2PLUS }, + { .div = 13, .val = 13, .flags = RATE_IN_3430ES2PLUS }, + { .div = 14, .val = 14, .flags = RATE_IN_3430ES2PLUS }, + { .div = 15, .val = 15, .flags = RATE_IN_3430ES2PLUS }, + { .div = 16, .val = 16, .flags = RATE_IN_3430ES2PLUS }, + { .div = 17, .val = 17, .flags = RATE_IN_3430ES2PLUS }, + { .div = 18, .val = 18, .flags = RATE_IN_3430ES2PLUS }, + { .div = 19, .val = 19, .flags = RATE_IN_3430ES2PLUS }, + { .div = 20, .val = 20, .flags = RATE_IN_3430ES2PLUS }, + { .div = 21, .val = 21, .flags = RATE_IN_3430ES2PLUS }, + { .div = 22, .val = 22, .flags = RATE_IN_3430ES2PLUS }, + { .div = 23, .val = 23, .flags = RATE_IN_3430ES2PLUS }, + { .div = 24, .val = 24, .flags = RATE_IN_3430ES2PLUS }, + { .div = 25, .val = 25, .flags = RATE_IN_3430ES2PLUS }, + { .div = 26, .val = 26, .flags = RATE_IN_3430ES2PLUS }, + { .div = 27, .val = 27, .flags = RATE_IN_3430ES2PLUS }, + { .div = 28, .val = 28, .flags = RATE_IN_3430ES2PLUS }, + { .div = 29, .val = 29, .flags = RATE_IN_3430ES2PLUS }, + { .div = 30, .val = 30, .flags = RATE_IN_3430ES2PLUS }, + { .div = 31, .val = 31, .flags = RATE_IN_3430ES2PLUS }, { .div = 0 }, }; @@ -562,6 +562,7 @@ static struct clk emu_core_alwon_ck = { /* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */ /* Type: DPLL */ static struct dpll_data dpll4_dd; + static struct dpll_data dpll4_dd_34xx __initdata = { .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2), .mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK, @@ -632,39 +633,20 @@ static struct clk dpll4_x2_ck = { .recalc = &omap3_clkoutx2_recalc, }; -static const struct clksel div16_dpll4_clksel[] = { - { .parent = &dpll4_ck, .rates = div16_dpll_rates }, - { .parent = NULL } -}; - -static const struct clksel div32_dpll4_clksel[] = { - { .parent = &dpll4_ck, .rates = div32_dpll4_rates_3630 }, +static const struct clksel dpll4_clksel[] = { + { .parent = &dpll4_ck, .rates = dpll4_rates }, { .parent = NULL } }; /* This virtual clock is the source for dpll4_m2x2_ck */ -static struct clk dpll4_m2_ck; - -static struct clk dpll4_m2_ck_34xx __initdata = { - .name = "dpll4_m2_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3), - .clksel_mask = OMAP3430_DIV_96M_MASK, - .clksel = div16_dpll4_clksel, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk dpll4_m2_ck_3630 __initdata = { +static struct clk dpll4_m2_ck = { .name = "dpll4_m2_ck", .ops = &clkops_null, .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3), .clksel_mask = OMAP3630_DIV_96M_MASK, - .clksel = div32_dpll4_clksel, + .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -698,7 +680,7 @@ static struct clk omap_192m_alwon_fck = { static const struct clksel_rate omap_96m_alwon_fck_rates[] = { { .div = 1, .val = 1, .flags = RATE_IN_36XX }, - { .div = 2, .val = 2, .flags = RATE_IN_36XX | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_36XX }, { .div = 0 } }; @@ -708,12 +690,12 @@ static const struct clksel omap_96m_alwon_fck_clksel[] = { }; static const struct clksel_rate omap_96m_dpll_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 0, .flags = RATE_IN_3XXX }, { .div = 0 } }; static const struct clksel_rate omap_96m_sys_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, { .div = 0 } }; @@ -760,28 +742,14 @@ static struct clk omap_96m_fck = { }; /* This virtual clock is the source for dpll4_m3x2_ck */ -static struct clk dpll4_m3_ck; - -static struct clk dpll4_m3_ck_34xx __initdata = { +static struct clk dpll4_m3_ck = { .name = "dpll4_m3_ck", .ops = &clkops_null, .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_TV_MASK, - .clksel = div16_dpll4_clksel, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk dpll4_m3_ck_3630 __initdata = { - .name = "dpll4_m3_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), - .clksel_mask = OMAP3630_CLKSEL_TV_MASK, - .clksel = div32_dpll4_clksel, + .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -799,12 +767,12 @@ static struct clk dpll4_m3x2_ck = { }; static const struct clksel_rate omap_54m_d4m3x2_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 0, .flags = RATE_IN_3XXX }, { .div = 0 } }; static const struct clksel_rate omap_54m_alt_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, { .div = 0 } }; @@ -825,12 +793,12 @@ static struct clk omap_54m_fck = { }; static const struct clksel_rate omap_48m_cm96m_rates[] = { - { .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 0, .flags = RATE_IN_3XXX }, { .div = 0 } }; static const struct clksel_rate omap_48m_alt_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, { .div = 0 } }; @@ -858,31 +826,15 @@ static struct clk omap_12m_fck = { .recalc = &omap_fixed_divisor_recalc, }; -/* This virstual clock is the source for dpll4_m4x2_ck */ -static struct clk dpll4_m4_ck; - -static struct clk dpll4_m4_ck_34xx __initdata = { +/* This virtual clock is the source for dpll4_m4x2_ck */ +static struct clk dpll4_m4_ck = { .name = "dpll4_m4_ck", .ops = &clkops_null, .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_DSS1_MASK, - .clksel = div16_dpll4_clksel, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap2_clksel_recalc, - .set_rate = &omap2_clksel_set_rate, - .round_rate = &omap2_clksel_round_rate, -}; - -static struct clk dpll4_m4_ck_3630 __initdata = { - .name = "dpll4_m4_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), - .clksel_mask = OMAP3630_CLKSEL_DSS1_MASK, - .clksel = div32_dpll4_clksel, + .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, .set_rate = &omap2_clksel_set_rate, @@ -902,30 +854,14 @@ static struct clk dpll4_m4x2_ck = { }; /* This virtual clock is the source for dpll4_m5x2_ck */ -static struct clk dpll4_m5_ck; - -static struct clk dpll4_m5_ck_34xx __initdata = { +static struct clk dpll4_m5_ck = { .name = "dpll4_m5_ck", .ops = &clkops_null, .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL), .clksel_mask = OMAP3430_CLKSEL_CAM_MASK, - .clksel = div16_dpll4_clksel, - .clkdm_name = "dpll4_clkdm", - .set_rate = &omap2_clksel_set_rate, - .round_rate = &omap2_clksel_round_rate, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk dpll4_m5_ck_3630 __initdata = { - .name = "dpll4_m5_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL), - .clksel_mask = OMAP3630_CLKSEL_CAM_MASK, - .clksel = div32_dpll4_clksel, + .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .set_rate = &omap2_clksel_set_rate, .round_rate = &omap2_clksel_round_rate, @@ -945,28 +881,14 @@ static struct clk dpll4_m5x2_ck = { }; /* This virtual clock is the source for dpll4_m6x2_ck */ -static struct clk dpll4_m6_ck; - -static struct clk dpll4_m6_ck_34xx __initdata = { +static struct clk dpll4_m6_ck = { .name = "dpll4_m6_ck", .ops = &clkops_null, .parent = &dpll4_ck, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), .clksel_mask = OMAP3430_DIV_DPLL4_MASK, - .clksel = div16_dpll4_clksel, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk dpll4_m6_ck_3630 __initdata = { - .name = "dpll4_m6_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3630_DIV_DPLL4_MASK, - .clksel = div32_dpll4_clksel, + .clksel = dpll4_clksel, .clkdm_name = "dpll4_clkdm", .recalc = &omap2_clksel_recalc, }; @@ -1049,22 +971,22 @@ static struct clk dpll5_m2_ck = { /* CM EXTERNAL CLOCK OUTPUTS */ static const struct clksel_rate clkout2_src_core_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 0, .flags = RATE_IN_3XXX }, { .div = 0 } }; static const struct clksel_rate clkout2_src_sys_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, { .div = 0 } }; static const struct clksel_rate clkout2_src_96m_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 2, .flags = RATE_IN_3XXX }, { .div = 0 } }; static const struct clksel_rate clkout2_src_54m_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 3, .flags = RATE_IN_3XXX }, { .div = 0 } }; @@ -1090,11 +1012,11 @@ static struct clk clkout2_src_ck = { }; static const struct clksel_rate sys_clkout2_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 1, .flags = RATE_IN_343X }, - { .div = 4, .val = 2, .flags = RATE_IN_343X }, - { .div = 8, .val = 3, .flags = RATE_IN_343X }, - { .div = 16, .val = 4, .flags = RATE_IN_343X }, + { .div = 1, .val = 0, .flags = RATE_IN_3XXX }, + { .div = 2, .val = 1, .flags = RATE_IN_3XXX }, + { .div = 4, .val = 2, .flags = RATE_IN_3XXX }, + { .div = 8, .val = 3, .flags = RATE_IN_3XXX }, + { .div = 16, .val = 4, .flags = RATE_IN_3XXX }, { .div = 0 }, }; @@ -1111,6 +1033,8 @@ static struct clk sys_clkout2 = { .clksel_mask = OMAP3430_CLKOUT2_DIV_MASK, .clksel = sys_clkout2_clksel, .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate }; /* CM OUTPUT CLOCKS */ @@ -1125,9 +1049,9 @@ static struct clk corex2_fck = { /* DPLL power domain clock controls */ static const struct clksel_rate div4_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, + { .div = 2, .val = 2, .flags = RATE_IN_3XXX }, + { .div = 4, .val = 4, .flags = RATE_IN_3XXX }, { .div = 0 } }; @@ -1161,8 +1085,8 @@ static struct clk mpu_ck = { /* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */ static const struct clksel_rate arm_fck_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 1, .flags = RATE_IN_343X }, + { .div = 1, .val = 0, .flags = RATE_IN_3XXX }, + { .div = 2, .val = 1, .flags = RATE_IN_3XXX }, { .div = 0 }, }; @@ -1333,25 +1257,25 @@ static struct clk gfx_cg2_ck = { static const struct clksel_rate sgx_core_rates[] = { { .div = 2, .val = 5, .flags = RATE_IN_36XX }, - { .div = 3, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 4, .val = 1, .flags = RATE_IN_343X }, - { .div = 6, .val = 2, .flags = RATE_IN_343X }, + { .div = 3, .val = 0, .flags = RATE_IN_3XXX }, + { .div = 4, .val = 1, .flags = RATE_IN_3XXX }, + { .div = 6, .val = 2, .flags = RATE_IN_3XXX }, { .div = 0 }, }; static const struct clksel_rate sgx_192m_rates[] = { - { .div = 1, .val = 4, .flags = RATE_IN_36XX | DEFAULT_RATE }, + { .div = 1, .val = 4, .flags = RATE_IN_36XX }, { .div = 0 }, }; static const struct clksel_rate sgx_corex2_rates[] = { - { .div = 3, .val = 6, .flags = RATE_IN_36XX | DEFAULT_RATE }, + { .div = 3, .val = 6, .flags = RATE_IN_36XX }, { .div = 5, .val = 7, .flags = RATE_IN_36XX }, { .div = 0 }, }; static const struct clksel_rate sgx_96m_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 3, .flags = RATE_IN_3XXX }, { .div = 0 }, }; @@ -1576,12 +1500,12 @@ static struct clk i2c1_fck = { * MCBSP 2, 3, 4 get their 96MHz clock from per_96m_fck. */ static const struct clksel_rate common_mcbsp_96m_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 0, .flags = RATE_IN_3XXX }, { .div = 0 } }; static const struct clksel_rate common_mcbsp_mcbsp_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, { .div = 0 } }; @@ -1714,12 +1638,12 @@ static struct clk hdq_fck = { /* DPLL3-derived clock */ static const struct clksel_rate ssi_ssr_corex2_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 3, .val = 3, .flags = RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 6, .val = 6, .flags = RATE_IN_343X }, - { .div = 8, .val = 8, .flags = RATE_IN_343X }, + { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, + { .div = 2, .val = 2, .flags = RATE_IN_3XXX }, + { .div = 3, .val = 3, .flags = RATE_IN_3XXX }, + { .div = 4, .val = 4, .flags = RATE_IN_3XXX }, + { .div = 6, .val = 6, .flags = RATE_IN_3XXX }, + { .div = 8, .val = 8, .flags = RATE_IN_3XXX }, { .div = 0 } }; @@ -2353,18 +2277,18 @@ static struct clk usbhost_ick = { /* WKUP */ static const struct clksel_rate usim_96m_rates[] = { - { .div = 2, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 8, .val = 5, .flags = RATE_IN_343X }, - { .div = 10, .val = 6, .flags = RATE_IN_343X }, + { .div = 2, .val = 3, .flags = RATE_IN_3XXX }, + { .div = 4, .val = 4, .flags = RATE_IN_3XXX }, + { .div = 8, .val = 5, .flags = RATE_IN_3XXX }, + { .div = 10, .val = 6, .flags = RATE_IN_3XXX }, { .div = 0 }, }; static const struct clksel_rate usim_120m_rates[] = { - { .div = 4, .val = 7, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 8, .val = 8, .flags = RATE_IN_343X }, - { .div = 16, .val = 9, .flags = RATE_IN_343X }, - { .div = 20, .val = 10, .flags = RATE_IN_343X }, + { .div = 4, .val = 7, .flags = RATE_IN_3XXX }, + { .div = 8, .val = 8, .flags = RATE_IN_3XXX }, + { .div = 16, .val = 9, .flags = RATE_IN_3XXX }, + { .div = 20, .val = 10, .flags = RATE_IN_3XXX }, { .div = 0 }, }; @@ -2951,22 +2875,22 @@ static struct clk mcbsp4_fck = { /* More information: ARM Cortex-A8 Technical Reference Manual, sect 10.1 */ static const struct clksel_rate emu_src_sys_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 0, .flags = RATE_IN_3XXX }, { .div = 0 }, }; static const struct clksel_rate emu_src_core_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, { .div = 0 }, }; static const struct clksel_rate emu_src_per_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 2, .flags = RATE_IN_3XXX }, { .div = 0 }, }; static const struct clksel_rate emu_src_mpu_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 3, .flags = RATE_IN_3XXX }, { .div = 0 }, }; @@ -2995,10 +2919,10 @@ static struct clk emu_src_ck = { }; static const struct clksel_rate pclk_emu_rates[] = { - { .div = 2, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 3, .val = 3, .flags = RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 6, .val = 6, .flags = RATE_IN_343X }, + { .div = 2, .val = 2, .flags = RATE_IN_3XXX }, + { .div = 3, .val = 3, .flags = RATE_IN_3XXX }, + { .div = 4, .val = 4, .flags = RATE_IN_3XXX }, + { .div = 6, .val = 6, .flags = RATE_IN_3XXX }, { .div = 0 }, }; @@ -3019,9 +2943,9 @@ static struct clk pclk_fck = { }; static const struct clksel_rate pclkx2_emu_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 3, .val = 3, .flags = RATE_IN_343X }, + { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, + { .div = 2, .val = 2, .flags = RATE_IN_3XXX }, + { .div = 3, .val = 3, .flags = RATE_IN_3XXX }, { .div = 0 }, }; @@ -3069,9 +2993,9 @@ static struct clk traceclk_src_fck = { }; static const struct clksel_rate traceclk_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, + { .div = 2, .val = 2, .flags = RATE_IN_3XXX }, + { .div = 4, .val = 4, .flags = RATE_IN_3XXX }, { .div = 0 }, }; @@ -3360,7 +3284,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2 | CK_AM35XX), CLK(NULL, "icr_ick", &icr_ick, CK_343X), CLK(NULL, "aes2_ick", &aes2_ick, CK_343X), - CLK(NULL, "sha12_ick", &sha12_ick, CK_343X), + CLK("omap-sham", "ick", &sha12_ick, CK_343X), CLK(NULL, "des2_ick", &des2_ick, CK_343X), CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_3XXX), CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_3XXX), @@ -3472,8 +3396,8 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX), CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX), CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX), - CLK("davinci_emac", "ick", &emac_ick, CK_AM35XX), - CLK("davinci_emac", "fck", &emac_fck, CK_AM35XX), + CLK("davinci_emac", "emac_clk", &emac_ick, CK_AM35XX), + CLK("davinci_emac", "phy_clk", &emac_fck, CK_AM35XX), CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX), CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX), CLK("musb_hdrc", "ick", &hsotgusb_ick_am35xx, CK_AM35XX), @@ -3488,14 +3412,8 @@ int __init omap3xxx_clk_init(void) struct omap_clk *c; u32 cpu_clkflg = CK_3XXX; - if (cpu_is_omap3517()) { - cpu_mask = RATE_IN_343X | RATE_IN_3430ES2; - cpu_clkflg |= CK_3517; - } else if (cpu_is_omap3505()) { - cpu_mask = RATE_IN_343X | RATE_IN_3430ES2; - cpu_clkflg |= CK_3505; - } else if (cpu_is_omap34xx()) { - cpu_mask = RATE_IN_343X; + if (cpu_is_omap34xx()) { + cpu_mask = RATE_IN_3XXX; cpu_clkflg |= CK_343X; /* @@ -3506,10 +3424,17 @@ int __init omap3xxx_clk_init(void) /* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */ cpu_clkflg |= CK_3430ES1; } else { - cpu_mask |= RATE_IN_3430ES2; + cpu_mask |= RATE_IN_3430ES2PLUS; cpu_clkflg |= CK_3430ES2; } + } else if (cpu_is_omap3517()) { + cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS; + cpu_clkflg |= CK_3517; + } else if (cpu_is_omap3505()) { + cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS; + cpu_clkflg |= CK_3505; } + if (omap3_has_192mhz_clk()) omap_96m_alwon_fck = omap_96m_alwon_fck_3630; @@ -3520,14 +3445,7 @@ int __init omap3xxx_clk_init(void) /* * XXX This type of dynamic rewriting of the clock tree is * deprecated and should be revised soon. - */ - dpll4_m2_ck = dpll4_m2_ck_3630; - dpll4_m3_ck = dpll4_m3_ck_3630; - dpll4_m4_ck = dpll4_m4_ck_3630; - dpll4_m5_ck = dpll4_m5_ck_3630; - dpll4_m6_ck = dpll4_m6_ck_3630; - - /* + * * For 3630: override clkops_omap2_dflt_wait for the * clocks affected from PWRDN reset Limitation */ @@ -3543,18 +3461,12 @@ int __init omap3xxx_clk_init(void) &clkops_omap36xx_pwrdn_with_hsdiv_wait_restore; dpll4_m6x2_ck.ops = &clkops_omap36xx_pwrdn_with_hsdiv_wait_restore; - } else { - /* - * XXX This type of dynamic rewriting of the clock tree is - * deprecated and should be revised soon. - */ - dpll4_m2_ck = dpll4_m2_ck_34xx; - dpll4_m3_ck = dpll4_m3_ck_34xx; - dpll4_m4_ck = dpll4_m4_ck_34xx; - dpll4_m5_ck = dpll4_m5_ck_34xx; - dpll4_m6_ck = dpll4_m6_ck_34xx; } + /* + * XXX This type of dynamic rewriting of the clock tree is + * deprecated and should be revised soon. + */ if (cpu_is_omap3630()) dpll4_dd = dpll4_dd_3630; else diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index a5c0c9c8e496..02804224517b 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -2675,6 +2675,11 @@ static struct omap_clk omap44xx_clks[] = { CLK("omap2_mcspi.2", "ick", &dummy_ck, CK_443X), CLK("omap2_mcspi.3", "ick", &dummy_ck, CK_443X), CLK("omap2_mcspi.4", "ick", &dummy_ck, CK_443X), + CLK("mmci-omap-hs.0", "ick", &dummy_ck, CK_443X), + CLK("mmci-omap-hs.1", "ick", &dummy_ck, CK_443X), + CLK("mmci-omap-hs.2", "ick", &dummy_ck, CK_443X), + CLK("mmci-omap-hs.3", "ick", &dummy_ck, CK_443X), + CLK("mmci-omap-hs.4", "ick", &dummy_ck, CK_443X), CLK(NULL, "uart1_ick", &dummy_ck, CK_443X), CLK(NULL, "uart2_ick", &dummy_ck, CK_443X), CLK(NULL, "uart3_ick", &dummy_ck, CK_443X), diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c index f69096b88cdb..1cf8131205fa 100644 --- a/arch/arm/mach-omap2/clock_common_data.c +++ b/arch/arm/mach-omap2/clock_common_data.c @@ -20,20 +20,20 @@ /* clksel_rate data common to 24xx/343x */ const struct clksel_rate gpt_32k_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_3XXX }, { .div = 0 } }; const struct clksel_rate gpt_sys_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, + { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX }, { .div = 0 } }; const struct clksel_rate gfx_l3_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X }, - { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, - { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X }, + { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX }, + { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_3XXX }, + { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_3XXX }, + { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_3XXX }, { .div = 0 } }; diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 6e568ec995ee..5d80cb897489 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -809,7 +809,7 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm) if (cpu_is_omap24xx()) { - cm_set_mod_reg_bits(OMAP24XX_FORCESTATE, + cm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK, clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL); } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) { @@ -853,7 +853,7 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm) if (cpu_is_omap24xx()) { - cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE, + cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK, clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL); } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) { diff --git a/arch/arm/mach-omap2/clockdomains44xx.h b/arch/arm/mach-omap2/clockdomains44xx.h index 438aaee2e392..7e5ba0f67925 100644 --- a/arch/arm/mach-omap2/clockdomains44xx.h +++ b/arch/arm/mach-omap2/clockdomains44xx.h @@ -131,7 +131,7 @@ static struct clockdomain mpuss_44xx_clkdm = { static struct clockdomain mpu0_44xx_clkdm = { .name = "mpu0_clkdm", .pwrdm = { .name = "cpu0_pwrdm" }, - .clkstctrl_reg = OMAP4430_CM_PDA_CPU0_CLKSTCTRL, + .clkstctrl_reg = OMAP4430_CM_CPU0_CLKSTCTRL, .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK, .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -140,7 +140,7 @@ static struct clockdomain mpu0_44xx_clkdm = { static struct clockdomain mpu1_44xx_clkdm = { .name = "mpu1_clkdm", .pwrdm = { .name = "cpu1_pwrdm" }, - .clkstctrl_reg = OMAP4430_CM_PDA_CPU1_CLKSTCTRL, + .clkstctrl_reg = OMAP4430_CM_CPU1_CLKSTCTRL, .clktrctrl_mask = OMAP4430_CLKTRCTRL_MASK, .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h index 297a2fe634ea..da51cc3ed7eb 100644 --- a/arch/arm/mach-omap2/cm-regbits-24xx.h +++ b/arch/arm/mach-omap2/cm-regbits-24xx.h @@ -20,43 +20,43 @@ /* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */ #define OMAP24XX_EN_CAM_SHIFT 31 -#define OMAP24XX_EN_CAM (1 << 31) +#define OMAP24XX_EN_CAM_MASK (1 << 31) #define OMAP24XX_EN_WDT4_SHIFT 29 -#define OMAP24XX_EN_WDT4 (1 << 29) +#define OMAP24XX_EN_WDT4_MASK (1 << 29) #define OMAP2420_EN_WDT3_SHIFT 28 -#define OMAP2420_EN_WDT3 (1 << 28) +#define OMAP2420_EN_WDT3_MASK (1 << 28) #define OMAP24XX_EN_MSPRO_SHIFT 27 -#define OMAP24XX_EN_MSPRO (1 << 27) +#define OMAP24XX_EN_MSPRO_MASK (1 << 27) #define OMAP24XX_EN_FAC_SHIFT 25 -#define OMAP24XX_EN_FAC (1 << 25) +#define OMAP24XX_EN_FAC_MASK (1 << 25) #define OMAP2420_EN_EAC_SHIFT 24 -#define OMAP2420_EN_EAC (1 << 24) +#define OMAP2420_EN_EAC_MASK (1 << 24) #define OMAP24XX_EN_HDQ_SHIFT 23 -#define OMAP24XX_EN_HDQ (1 << 23) +#define OMAP24XX_EN_HDQ_MASK (1 << 23) #define OMAP2420_EN_I2C2_SHIFT 20 -#define OMAP2420_EN_I2C2 (1 << 20) +#define OMAP2420_EN_I2C2_MASK (1 << 20) #define OMAP2420_EN_I2C1_SHIFT 19 -#define OMAP2420_EN_I2C1 (1 << 19) +#define OMAP2420_EN_I2C1_MASK (1 << 19) /* CM_FCLKEN2_CORE and CM_ICLKEN2_CORE shared bits */ #define OMAP2430_EN_MCBSP5_SHIFT 5 -#define OMAP2430_EN_MCBSP5 (1 << 5) +#define OMAP2430_EN_MCBSP5_MASK (1 << 5) #define OMAP2430_EN_MCBSP4_SHIFT 4 -#define OMAP2430_EN_MCBSP4 (1 << 4) +#define OMAP2430_EN_MCBSP4_MASK (1 << 4) #define OMAP2430_EN_MCBSP3_SHIFT 3 -#define OMAP2430_EN_MCBSP3 (1 << 3) +#define OMAP2430_EN_MCBSP3_MASK (1 << 3) #define OMAP24XX_EN_SSI_SHIFT 1 -#define OMAP24XX_EN_SSI (1 << 1) +#define OMAP24XX_EN_SSI_MASK (1 << 1) /* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */ #define OMAP24XX_EN_MPU_WDT_SHIFT 3 -#define OMAP24XX_EN_MPU_WDT (1 << 3) +#define OMAP24XX_EN_MPU_WDT_MASK (1 << 3) /* Bits specific to each register */ /* CM_IDLEST_MPU */ /* 2430 only */ -#define OMAP2430_ST_MPU (1 << 0) +#define OMAP2430_ST_MPU_MASK (1 << 0) /* CM_CLKSEL_MPU */ #define OMAP24XX_CLKSEL_MPU_SHIFT 0 @@ -68,46 +68,46 @@ /* CM_FCLKEN1_CORE specific bits*/ #define OMAP24XX_EN_TV_SHIFT 2 -#define OMAP24XX_EN_TV (1 << 2) +#define OMAP24XX_EN_TV_MASK (1 << 2) #define OMAP24XX_EN_DSS2_SHIFT 1 -#define OMAP24XX_EN_DSS2 (1 << 1) +#define OMAP24XX_EN_DSS2_MASK (1 << 1) #define OMAP24XX_EN_DSS1_SHIFT 0 -#define OMAP24XX_EN_DSS1 (1 << 0) +#define OMAP24XX_EN_DSS1_MASK (1 << 0) /* CM_FCLKEN2_CORE specific bits */ #define OMAP2430_EN_I2CHS2_SHIFT 20 -#define OMAP2430_EN_I2CHS2 (1 << 20) +#define OMAP2430_EN_I2CHS2_MASK (1 << 20) #define OMAP2430_EN_I2CHS1_SHIFT 19 -#define OMAP2430_EN_I2CHS1 (1 << 19) +#define OMAP2430_EN_I2CHS1_MASK (1 << 19) #define OMAP2430_EN_MMCHSDB2_SHIFT 17 -#define OMAP2430_EN_MMCHSDB2 (1 << 17) +#define OMAP2430_EN_MMCHSDB2_MASK (1 << 17) #define OMAP2430_EN_MMCHSDB1_SHIFT 16 -#define OMAP2430_EN_MMCHSDB1 (1 << 16) +#define OMAP2430_EN_MMCHSDB1_MASK (1 << 16) /* CM_ICLKEN1_CORE specific bits */ #define OMAP24XX_EN_MAILBOXES_SHIFT 30 -#define OMAP24XX_EN_MAILBOXES (1 << 30) +#define OMAP24XX_EN_MAILBOXES_MASK (1 << 30) #define OMAP24XX_EN_DSS_SHIFT 0 -#define OMAP24XX_EN_DSS (1 << 0) +#define OMAP24XX_EN_DSS_MASK (1 << 0) /* CM_ICLKEN2_CORE specific bits */ /* CM_ICLKEN3_CORE */ /* 2430 only */ #define OMAP2430_EN_SDRC_SHIFT 2 -#define OMAP2430_EN_SDRC (1 << 2) +#define OMAP2430_EN_SDRC_MASK (1 << 2) /* CM_ICLKEN4_CORE */ #define OMAP24XX_EN_PKA_SHIFT 4 -#define OMAP24XX_EN_PKA (1 << 4) +#define OMAP24XX_EN_PKA_MASK (1 << 4) #define OMAP24XX_EN_AES_SHIFT 3 -#define OMAP24XX_EN_AES (1 << 3) +#define OMAP24XX_EN_AES_MASK (1 << 3) #define OMAP24XX_EN_RNG_SHIFT 2 -#define OMAP24XX_EN_RNG (1 << 2) +#define OMAP24XX_EN_RNG_MASK (1 << 2) #define OMAP24XX_EN_SHA_SHIFT 1 -#define OMAP24XX_EN_SHA (1 << 1) +#define OMAP24XX_EN_SHA_MASK (1 << 1) #define OMAP24XX_EN_DES_SHIFT 0 -#define OMAP24XX_EN_DES (1 << 0) +#define OMAP24XX_EN_DES_MASK (1 << 0) /* CM_IDLEST1_CORE specific bits */ #define OMAP24XX_ST_MAILBOXES_SHIFT 30 @@ -138,9 +138,9 @@ /* CM_IDLEST2_CORE */ #define OMAP2430_ST_MCBSP5_SHIFT 5 #define OMAP2430_ST_MCBSP5_MASK (1 << 5) -#define OMAP2430_ST_MCBSP4_SHIFT 4 +#define OMAP2430_ST_MCBSP4_SHIFT 4 #define OMAP2430_ST_MCBSP4_MASK (1 << 4) -#define OMAP2430_ST_MCBSP3_SHIFT 3 +#define OMAP2430_ST_MCBSP3_SHIFT 3 #define OMAP2430_ST_MCBSP3_MASK (1 << 3) #define OMAP24XX_ST_SSI_SHIFT 1 #define OMAP24XX_ST_SSI_MASK (1 << 1) @@ -162,62 +162,62 @@ #define OMAP24XX_ST_DES_MASK (1 << 0) /* CM_AUTOIDLE1_CORE */ -#define OMAP24XX_AUTO_CAM (1 << 31) -#define OMAP24XX_AUTO_MAILBOXES (1 << 30) -#define OMAP24XX_AUTO_WDT4 (1 << 29) -#define OMAP2420_AUTO_WDT3 (1 << 28) -#define OMAP24XX_AUTO_MSPRO (1 << 27) -#define OMAP2420_AUTO_MMC (1 << 26) -#define OMAP24XX_AUTO_FAC (1 << 25) -#define OMAP2420_AUTO_EAC (1 << 24) -#define OMAP24XX_AUTO_HDQ (1 << 23) -#define OMAP24XX_AUTO_UART2 (1 << 22) -#define OMAP24XX_AUTO_UART1 (1 << 21) -#define OMAP24XX_AUTO_I2C2 (1 << 20) -#define OMAP24XX_AUTO_I2C1 (1 << 19) -#define OMAP24XX_AUTO_MCSPI2 (1 << 18) -#define OMAP24XX_AUTO_MCSPI1 (1 << 17) -#define OMAP24XX_AUTO_MCBSP2 (1 << 16) -#define OMAP24XX_AUTO_MCBSP1 (1 << 15) -#define OMAP24XX_AUTO_GPT12 (1 << 14) -#define OMAP24XX_AUTO_GPT11 (1 << 13) -#define OMAP24XX_AUTO_GPT10 (1 << 12) -#define OMAP24XX_AUTO_GPT9 (1 << 11) -#define OMAP24XX_AUTO_GPT8 (1 << 10) -#define OMAP24XX_AUTO_GPT7 (1 << 9) -#define OMAP24XX_AUTO_GPT6 (1 << 8) -#define OMAP24XX_AUTO_GPT5 (1 << 7) -#define OMAP24XX_AUTO_GPT4 (1 << 6) -#define OMAP24XX_AUTO_GPT3 (1 << 5) -#define OMAP24XX_AUTO_GPT2 (1 << 4) -#define OMAP2420_AUTO_VLYNQ (1 << 3) -#define OMAP24XX_AUTO_DSS (1 << 0) +#define OMAP24XX_AUTO_CAM_MASK (1 << 31) +#define OMAP24XX_AUTO_MAILBOXES_MASK (1 << 30) +#define OMAP24XX_AUTO_WDT4_MASK (1 << 29) +#define OMAP2420_AUTO_WDT3_MASK (1 << 28) +#define OMAP24XX_AUTO_MSPRO_MASK (1 << 27) +#define OMAP2420_AUTO_MMC_MASK (1 << 26) +#define OMAP24XX_AUTO_FAC_MASK (1 << 25) +#define OMAP2420_AUTO_EAC_MASK (1 << 24) +#define OMAP24XX_AUTO_HDQ_MASK (1 << 23) +#define OMAP24XX_AUTO_UART2_MASK (1 << 22) +#define OMAP24XX_AUTO_UART1_MASK (1 << 21) +#define OMAP24XX_AUTO_I2C2_MASK (1 << 20) +#define OMAP24XX_AUTO_I2C1_MASK (1 << 19) +#define OMAP24XX_AUTO_MCSPI2_MASK (1 << 18) +#define OMAP24XX_AUTO_MCSPI1_MASK (1 << 17) +#define OMAP24XX_AUTO_MCBSP2_MASK (1 << 16) +#define OMAP24XX_AUTO_MCBSP1_MASK (1 << 15) +#define OMAP24XX_AUTO_GPT12_MASK (1 << 14) +#define OMAP24XX_AUTO_GPT11_MASK (1 << 13) +#define OMAP24XX_AUTO_GPT10_MASK (1 << 12) +#define OMAP24XX_AUTO_GPT9_MASK (1 << 11) +#define OMAP24XX_AUTO_GPT8_MASK (1 << 10) +#define OMAP24XX_AUTO_GPT7_MASK (1 << 9) +#define OMAP24XX_AUTO_GPT6_MASK (1 << 8) +#define OMAP24XX_AUTO_GPT5_MASK (1 << 7) +#define OMAP24XX_AUTO_GPT4_MASK (1 << 6) +#define OMAP24XX_AUTO_GPT3_MASK (1 << 5) +#define OMAP24XX_AUTO_GPT2_MASK (1 << 4) +#define OMAP2420_AUTO_VLYNQ_MASK (1 << 3) +#define OMAP24XX_AUTO_DSS_MASK (1 << 0) /* CM_AUTOIDLE2_CORE */ -#define OMAP2430_AUTO_MDM_INTC (1 << 11) -#define OMAP2430_AUTO_GPIO5 (1 << 10) -#define OMAP2430_AUTO_MCSPI3 (1 << 9) -#define OMAP2430_AUTO_MMCHS2 (1 << 8) -#define OMAP2430_AUTO_MMCHS1 (1 << 7) -#define OMAP2430_AUTO_USBHS (1 << 6) -#define OMAP2430_AUTO_MCBSP5 (1 << 5) -#define OMAP2430_AUTO_MCBSP4 (1 << 4) -#define OMAP2430_AUTO_MCBSP3 (1 << 3) -#define OMAP24XX_AUTO_UART3 (1 << 2) -#define OMAP24XX_AUTO_SSI (1 << 1) -#define OMAP24XX_AUTO_USB (1 << 0) +#define OMAP2430_AUTO_MDM_INTC_MASK (1 << 11) +#define OMAP2430_AUTO_GPIO5_MASK (1 << 10) +#define OMAP2430_AUTO_MCSPI3_MASK (1 << 9) +#define OMAP2430_AUTO_MMCHS2_MASK (1 << 8) +#define OMAP2430_AUTO_MMCHS1_MASK (1 << 7) +#define OMAP2430_AUTO_USBHS_MASK (1 << 6) +#define OMAP2430_AUTO_MCBSP5_MASK (1 << 5) +#define OMAP2430_AUTO_MCBSP4_MASK (1 << 4) +#define OMAP2430_AUTO_MCBSP3_MASK (1 << 3) +#define OMAP24XX_AUTO_UART3_MASK (1 << 2) +#define OMAP24XX_AUTO_SSI_MASK (1 << 1) +#define OMAP24XX_AUTO_USB_MASK (1 << 0) /* CM_AUTOIDLE3_CORE */ -#define OMAP24XX_AUTO_SDRC (1 << 2) -#define OMAP24XX_AUTO_GPMC (1 << 1) -#define OMAP24XX_AUTO_SDMA (1 << 0) +#define OMAP24XX_AUTO_SDRC_MASK (1 << 2) +#define OMAP24XX_AUTO_GPMC_MASK (1 << 1) +#define OMAP24XX_AUTO_SDMA_MASK (1 << 0) /* CM_AUTOIDLE4_CORE */ -#define OMAP24XX_AUTO_PKA (1 << 4) -#define OMAP24XX_AUTO_AES (1 << 3) -#define OMAP24XX_AUTO_RNG (1 << 2) -#define OMAP24XX_AUTO_SHA (1 << 1) -#define OMAP24XX_AUTO_DES (1 << 0) +#define OMAP24XX_AUTO_PKA_MASK (1 << 4) +#define OMAP24XX_AUTO_AES_MASK (1 << 3) +#define OMAP24XX_AUTO_RNG_MASK (1 << 2) +#define OMAP24XX_AUTO_SHA_MASK (1 << 1) +#define OMAP24XX_AUTO_DES_MASK (1 << 0) /* CM_CLKSEL1_CORE */ #define OMAP24XX_CLKSEL_USB_SHIFT 25 @@ -269,9 +269,9 @@ /* CM_FCLKEN_GFX */ #define OMAP24XX_EN_3D_SHIFT 2 -#define OMAP24XX_EN_3D (1 << 2) +#define OMAP24XX_EN_3D_MASK (1 << 2) #define OMAP24XX_EN_2D_SHIFT 1 -#define OMAP24XX_EN_2D (1 << 1) +#define OMAP24XX_EN_2D_MASK (1 << 1) /* CM_ICLKEN_GFX specific bits */ @@ -287,13 +287,13 @@ /* CM_ICLKEN_WKUP specific bits */ #define OMAP2430_EN_ICR_SHIFT 6 -#define OMAP2430_EN_ICR (1 << 6) +#define OMAP2430_EN_ICR_MASK (1 << 6) #define OMAP24XX_EN_OMAPCTRL_SHIFT 5 -#define OMAP24XX_EN_OMAPCTRL (1 << 5) +#define OMAP24XX_EN_OMAPCTRL_MASK (1 << 5) #define OMAP24XX_EN_WDT1_SHIFT 4 -#define OMAP24XX_EN_WDT1 (1 << 4) +#define OMAP24XX_EN_WDT1_MASK (1 << 4) #define OMAP24XX_EN_32KSYNC_SHIFT 1 -#define OMAP24XX_EN_32KSYNC (1 << 1) +#define OMAP24XX_EN_32KSYNC_MASK (1 << 1) /* CM_IDLEST_WKUP specific bits */ #define OMAP2430_ST_ICR_SHIFT 6 @@ -308,12 +308,12 @@ #define OMAP24XX_ST_32KSYNC_MASK (1 << 1) /* CM_AUTOIDLE_WKUP */ -#define OMAP24XX_AUTO_OMAPCTRL (1 << 5) -#define OMAP24XX_AUTO_WDT1 (1 << 4) -#define OMAP24XX_AUTO_MPU_WDT (1 << 3) -#define OMAP24XX_AUTO_GPIOS (1 << 2) -#define OMAP24XX_AUTO_32KSYNC (1 << 1) -#define OMAP24XX_AUTO_GPT1 (1 << 0) +#define OMAP24XX_AUTO_OMAPCTRL_MASK (1 << 5) +#define OMAP24XX_AUTO_WDT1_MASK (1 << 4) +#define OMAP24XX_AUTO_MPU_WDT_MASK (1 << 3) +#define OMAP24XX_AUTO_GPIOS_MASK (1 << 2) +#define OMAP24XX_AUTO_32KSYNC_MASK (1 << 1) +#define OMAP24XX_AUTO_GPT1_MASK (1 << 0) /* CM_CLKSEL_WKUP */ #define OMAP24XX_CLKSEL_GPT1_SHIFT 0 @@ -328,12 +328,12 @@ #define OMAP24XX_EN_DPLL_MASK (0x3 << 0) /* CM_IDLEST_CKGEN */ -#define OMAP24XX_ST_54M_APLL (1 << 9) -#define OMAP24XX_ST_96M_APLL (1 << 8) -#define OMAP24XX_ST_54M_CLK (1 << 6) -#define OMAP24XX_ST_12M_CLK (1 << 5) -#define OMAP24XX_ST_48M_CLK (1 << 4) -#define OMAP24XX_ST_96M_CLK (1 << 2) +#define OMAP24XX_ST_54M_APLL_MASK (1 << 9) +#define OMAP24XX_ST_96M_APLL_MASK (1 << 8) +#define OMAP24XX_ST_54M_CLK_MASK (1 << 6) +#define OMAP24XX_ST_12M_CLK_MASK (1 << 5) +#define OMAP24XX_ST_48M_CLK_MASK (1 << 4) +#define OMAP24XX_ST_96M_CLK_MASK (1 << 2) #define OMAP24XX_ST_CORE_CLK_SHIFT 0 #define OMAP24XX_ST_CORE_CLK_MASK (0x3 << 0) @@ -355,11 +355,11 @@ #define OMAP24XX_DPLL_DIV_SHIFT 8 #define OMAP24XX_DPLL_DIV_MASK (0xf << 8) #define OMAP24XX_54M_SOURCE_SHIFT 5 -#define OMAP24XX_54M_SOURCE (1 << 5) +#define OMAP24XX_54M_SOURCE_MASK (1 << 5) #define OMAP2430_96M_SOURCE_SHIFT 4 -#define OMAP2430_96M_SOURCE (1 << 4) +#define OMAP2430_96M_SOURCE_MASK (1 << 4) #define OMAP24XX_48M_SOURCE_SHIFT 3 -#define OMAP24XX_48M_SOURCE (1 << 3) +#define OMAP24XX_48M_SOURCE_MASK (1 << 3) #define OMAP2430_ALTCLK_SOURCE_SHIFT 0 #define OMAP2430_ALTCLK_SOURCE_MASK (0x7 << 0) @@ -369,29 +369,29 @@ /* CM_FCLKEN_DSP */ #define OMAP2420_EN_IVA_COP_SHIFT 10 -#define OMAP2420_EN_IVA_COP (1 << 10) +#define OMAP2420_EN_IVA_COP_MASK (1 << 10) #define OMAP2420_EN_IVA_MPU_SHIFT 8 -#define OMAP2420_EN_IVA_MPU (1 << 8) +#define OMAP2420_EN_IVA_MPU_MASK (1 << 8) #define OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT 0 -#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP (1 << 0) +#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP_MASK (1 << 0) /* CM_ICLKEN_DSP */ #define OMAP2420_EN_DSP_IPI_SHIFT 1 -#define OMAP2420_EN_DSP_IPI (1 << 1) +#define OMAP2420_EN_DSP_IPI_MASK (1 << 1) /* CM_IDLEST_DSP */ -#define OMAP2420_ST_IVA (1 << 8) -#define OMAP2420_ST_IPI (1 << 1) -#define OMAP24XX_ST_DSP (1 << 0) +#define OMAP2420_ST_IVA_MASK (1 << 8) +#define OMAP2420_ST_IPI_MASK (1 << 1) +#define OMAP24XX_ST_DSP_MASK (1 << 0) /* CM_AUTOIDLE_DSP */ -#define OMAP2420_AUTO_DSP_IPI (1 << 1) +#define OMAP2420_AUTO_DSP_IPI_MASK (1 << 1) /* CM_CLKSEL_DSP */ -#define OMAP2420_SYNC_IVA (1 << 13) +#define OMAP2420_SYNC_IVA_MASK (1 << 13) #define OMAP2420_CLKSEL_IVA_SHIFT 8 #define OMAP2420_CLKSEL_IVA_MASK (0x1f << 8) -#define OMAP24XX_SYNC_DSP (1 << 7) +#define OMAP24XX_SYNC_DSP_MASK (1 << 7) #define OMAP24XX_CLKSEL_DSP_IF_SHIFT 5 #define OMAP24XX_CLKSEL_DSP_IF_MASK (0x3 << 5) #define OMAP24XX_CLKSEL_DSP_SHIFT 0 @@ -406,24 +406,24 @@ /* CM_FCLKEN_MDM */ /* 2430 only */ #define OMAP2430_EN_OSC_SHIFT 1 -#define OMAP2430_EN_OSC (1 << 1) +#define OMAP2430_EN_OSC_MASK (1 << 1) /* CM_ICLKEN_MDM */ /* 2430 only */ #define OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT 0 -#define OMAP2430_CM_ICLKEN_MDM_EN_MDM (1 << 0) +#define OMAP2430_CM_ICLKEN_MDM_EN_MDM_MASK (1 << 0) /* CM_IDLEST_MDM specific bits */ /* 2430 only */ /* CM_AUTOIDLE_MDM */ /* 2430 only */ -#define OMAP2430_AUTO_OSC (1 << 1) -#define OMAP2430_AUTO_MDM (1 << 0) +#define OMAP2430_AUTO_OSC_MASK (1 << 1) +#define OMAP2430_AUTO_MDM_MASK (1 << 0) /* CM_CLKSEL_MDM */ /* 2430 only */ -#define OMAP2430_SYNC_MDM (1 << 4) +#define OMAP2430_SYNC_MDM_MASK (1 << 4) #define OMAP2430_CLKSEL_MDM_SHIFT 0 #define OMAP2430_CLKSEL_MDM_MASK (0xf << 0) diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index a3a3ca07e383..fe82b79d5f3b 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -21,15 +21,15 @@ /* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */ #define OMAP3430ES2_EN_MMC3_MASK (1 << 30) #define OMAP3430ES2_EN_MMC3_SHIFT 30 -#define OMAP3430_EN_MSPRO (1 << 23) +#define OMAP3430_EN_MSPRO_MASK (1 << 23) #define OMAP3430_EN_MSPRO_SHIFT 23 -#define OMAP3430_EN_HDQ (1 << 22) +#define OMAP3430_EN_HDQ_MASK (1 << 22) #define OMAP3430_EN_HDQ_SHIFT 22 -#define OMAP3430ES1_EN_FSHOSTUSB (1 << 5) +#define OMAP3430ES1_EN_FSHOSTUSB_MASK (1 << 5) #define OMAP3430ES1_EN_FSHOSTUSB_SHIFT 5 -#define OMAP3430ES1_EN_D2D (1 << 3) +#define OMAP3430ES1_EN_D2D_MASK (1 << 3) #define OMAP3430ES1_EN_D2D_SHIFT 3 -#define OMAP3430_EN_SSI (1 << 0) +#define OMAP3430_EN_SSI_MASK (1 << 0) #define OMAP3430_EN_SSI_SHIFT 0 /* CM_FCLKEN3_CORE and CM_ICLKEN3_CORE shared bits */ @@ -37,19 +37,19 @@ #define OMAP3430ES2_EN_USBTLL_MASK (1 << 2) /* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */ -#define OMAP3430_EN_WDT2 (1 << 5) +#define OMAP3430_EN_WDT2_MASK (1 << 5) #define OMAP3430_EN_WDT2_SHIFT 5 /* CM_ICLKEN_CAM, CM_FCLKEN_CAM shared bits */ -#define OMAP3430_EN_CAM (1 << 0) +#define OMAP3430_EN_CAM_MASK (1 << 0) #define OMAP3430_EN_CAM_SHIFT 0 /* CM_FCLKEN_PER, CM_ICLKEN_PER shared bits */ -#define OMAP3430_EN_WDT3 (1 << 12) +#define OMAP3430_EN_WDT3_MASK (1 << 12) #define OMAP3430_EN_WDT3_SHIFT 12 /* CM_CLKSEL2_EMU, CM_CLKSEL3_EMU shared bits */ -#define OMAP3430_OVERRIDE_ENABLE (1 << 19) +#define OMAP3430_OVERRIDE_ENABLE_MASK (1 << 19) /* Bits specific to each register */ @@ -69,7 +69,7 @@ #define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0) /* CM_IDLEST_IVA2 */ -#define OMAP3430_ST_IVA2 (1 << 0) +#define OMAP3430_ST_IVA2_MASK (1 << 0) /* CM_IDLEST_PLL_IVA2 */ #define OMAP3430_ST_IVA2_CLK_SHIFT 0 @@ -114,7 +114,7 @@ #define OMAP3430_EN_MPU_DPLL_MASK (0x7 << 0) /* CM_IDLEST_MPU */ -#define OMAP3430_ST_MPU (1 << 0) +#define OMAP3430_ST_MPU_MASK (1 << 0) /* CM_IDLEST_PLL_MPU */ #define OMAP3430_ST_MPU_CLK_SHIFT 0 @@ -145,50 +145,50 @@ #define OMAP3430_CLKACTIVITY_MPU_MASK (1 << 0) /* CM_FCLKEN1_CORE specific bits */ -#define OMAP3430_EN_MODEM (1 << 31) +#define OMAP3430_EN_MODEM_MASK (1 << 31) #define OMAP3430_EN_MODEM_SHIFT 31 /* CM_ICLKEN1_CORE specific bits */ -#define OMAP3430_EN_ICR (1 << 29) +#define OMAP3430_EN_ICR_MASK (1 << 29) #define OMAP3430_EN_ICR_SHIFT 29 -#define OMAP3430_EN_AES2 (1 << 28) +#define OMAP3430_EN_AES2_MASK (1 << 28) #define OMAP3430_EN_AES2_SHIFT 28 -#define OMAP3430_EN_SHA12 (1 << 27) +#define OMAP3430_EN_SHA12_MASK (1 << 27) #define OMAP3430_EN_SHA12_SHIFT 27 -#define OMAP3430_EN_DES2 (1 << 26) +#define OMAP3430_EN_DES2_MASK (1 << 26) #define OMAP3430_EN_DES2_SHIFT 26 -#define OMAP3430ES1_EN_FAC (1 << 8) +#define OMAP3430ES1_EN_FAC_MASK (1 << 8) #define OMAP3430ES1_EN_FAC_SHIFT 8 -#define OMAP3430_EN_MAILBOXES (1 << 7) +#define OMAP3430_EN_MAILBOXES_MASK (1 << 7) #define OMAP3430_EN_MAILBOXES_SHIFT 7 -#define OMAP3430_EN_OMAPCTRL (1 << 6) +#define OMAP3430_EN_OMAPCTRL_MASK (1 << 6) #define OMAP3430_EN_OMAPCTRL_SHIFT 6 -#define OMAP3430_EN_SAD2D (1 << 3) +#define OMAP3430_EN_SAD2D_MASK (1 << 3) #define OMAP3430_EN_SAD2D_SHIFT 3 -#define OMAP3430_EN_SDRC (1 << 1) +#define OMAP3430_EN_SDRC_MASK (1 << 1) #define OMAP3430_EN_SDRC_SHIFT 1 /* AM35XX specific CM_ICLKEN1_CORE bits */ #define AM35XX_EN_IPSS_MASK (1 << 4) #define AM35XX_EN_IPSS_SHIFT 4 -#define AM35XX_EN_UART4_MASK (1 << 23) +#define AM35XX_EN_UART4_MASK (1 << 23) #define AM35XX_EN_UART4_SHIFT 23 /* CM_ICLKEN2_CORE */ -#define OMAP3430_EN_PKA (1 << 4) +#define OMAP3430_EN_PKA_MASK (1 << 4) #define OMAP3430_EN_PKA_SHIFT 4 -#define OMAP3430_EN_AES1 (1 << 3) +#define OMAP3430_EN_AES1_MASK (1 << 3) #define OMAP3430_EN_AES1_SHIFT 3 -#define OMAP3430_EN_RNG (1 << 2) +#define OMAP3430_EN_RNG_MASK (1 << 2) #define OMAP3430_EN_RNG_SHIFT 2 -#define OMAP3430_EN_SHA11 (1 << 1) +#define OMAP3430_EN_SHA11_MASK (1 << 1) #define OMAP3430_EN_SHA11_SHIFT 1 -#define OMAP3430_EN_DES1 (1 << 0) +#define OMAP3430_EN_DES1_MASK (1 << 0) #define OMAP3430_EN_DES1_SHIFT 0 /* CM_ICLKEN3_CORE */ #define OMAP3430_EN_MAD2D_SHIFT 3 -#define OMAP3430_EN_MAD2D (1 << 3) +#define OMAP3430_EN_MAD2D_MASK (1 << 3) /* CM_FCLKEN3_CORE specific bits */ #define OMAP3430ES2_EN_TS_SHIFT 1 @@ -249,79 +249,79 @@ #define OMAP3430ES2_ST_CPEFUSE_MASK (1 << 0) /* CM_AUTOIDLE1_CORE */ -#define OMAP3430_AUTO_MODEM (1 << 31) +#define OMAP3430_AUTO_MODEM_MASK (1 << 31) #define OMAP3430_AUTO_MODEM_SHIFT 31 -#define OMAP3430ES2_AUTO_MMC3 (1 << 30) +#define OMAP3430ES2_AUTO_MMC3_MASK (1 << 30) #define OMAP3430ES2_AUTO_MMC3_SHIFT 30 -#define OMAP3430ES2_AUTO_ICR (1 << 29) +#define OMAP3430ES2_AUTO_ICR_MASK (1 << 29) #define OMAP3430ES2_AUTO_ICR_SHIFT 29 -#define OMAP3430_AUTO_AES2 (1 << 28) +#define OMAP3430_AUTO_AES2_MASK (1 << 28) #define OMAP3430_AUTO_AES2_SHIFT 28 -#define OMAP3430_AUTO_SHA12 (1 << 27) +#define OMAP3430_AUTO_SHA12_MASK (1 << 27) #define OMAP3430_AUTO_SHA12_SHIFT 27 -#define OMAP3430_AUTO_DES2 (1 << 26) +#define OMAP3430_AUTO_DES2_MASK (1 << 26) #define OMAP3430_AUTO_DES2_SHIFT 26 -#define OMAP3430_AUTO_MMC2 (1 << 25) +#define OMAP3430_AUTO_MMC2_MASK (1 << 25) #define OMAP3430_AUTO_MMC2_SHIFT 25 -#define OMAP3430_AUTO_MMC1 (1 << 24) +#define OMAP3430_AUTO_MMC1_MASK (1 << 24) #define OMAP3430_AUTO_MMC1_SHIFT 24 -#define OMAP3430_AUTO_MSPRO (1 << 23) +#define OMAP3430_AUTO_MSPRO_MASK (1 << 23) #define OMAP3430_AUTO_MSPRO_SHIFT 23 -#define OMAP3430_AUTO_HDQ (1 << 22) +#define OMAP3430_AUTO_HDQ_MASK (1 << 22) #define OMAP3430_AUTO_HDQ_SHIFT 22 -#define OMAP3430_AUTO_MCSPI4 (1 << 21) +#define OMAP3430_AUTO_MCSPI4_MASK (1 << 21) #define OMAP3430_AUTO_MCSPI4_SHIFT 21 -#define OMAP3430_AUTO_MCSPI3 (1 << 20) +#define OMAP3430_AUTO_MCSPI3_MASK (1 << 20) #define OMAP3430_AUTO_MCSPI3_SHIFT 20 -#define OMAP3430_AUTO_MCSPI2 (1 << 19) +#define OMAP3430_AUTO_MCSPI2_MASK (1 << 19) #define OMAP3430_AUTO_MCSPI2_SHIFT 19 -#define OMAP3430_AUTO_MCSPI1 (1 << 18) +#define OMAP3430_AUTO_MCSPI1_MASK (1 << 18) #define OMAP3430_AUTO_MCSPI1_SHIFT 18 -#define OMAP3430_AUTO_I2C3 (1 << 17) +#define OMAP3430_AUTO_I2C3_MASK (1 << 17) #define OMAP3430_AUTO_I2C3_SHIFT 17 -#define OMAP3430_AUTO_I2C2 (1 << 16) +#define OMAP3430_AUTO_I2C2_MASK (1 << 16) #define OMAP3430_AUTO_I2C2_SHIFT 16 -#define OMAP3430_AUTO_I2C1 (1 << 15) +#define OMAP3430_AUTO_I2C1_MASK (1 << 15) #define OMAP3430_AUTO_I2C1_SHIFT 15 -#define OMAP3430_AUTO_UART2 (1 << 14) +#define OMAP3430_AUTO_UART2_MASK (1 << 14) #define OMAP3430_AUTO_UART2_SHIFT 14 -#define OMAP3430_AUTO_UART1 (1 << 13) +#define OMAP3430_AUTO_UART1_MASK (1 << 13) #define OMAP3430_AUTO_UART1_SHIFT 13 -#define OMAP3430_AUTO_GPT11 (1 << 12) +#define OMAP3430_AUTO_GPT11_MASK (1 << 12) #define OMAP3430_AUTO_GPT11_SHIFT 12 -#define OMAP3430_AUTO_GPT10 (1 << 11) +#define OMAP3430_AUTO_GPT10_MASK (1 << 11) #define OMAP3430_AUTO_GPT10_SHIFT 11 -#define OMAP3430_AUTO_MCBSP5 (1 << 10) +#define OMAP3430_AUTO_MCBSP5_MASK (1 << 10) #define OMAP3430_AUTO_MCBSP5_SHIFT 10 -#define OMAP3430_AUTO_MCBSP1 (1 << 9) +#define OMAP3430_AUTO_MCBSP1_MASK (1 << 9) #define OMAP3430_AUTO_MCBSP1_SHIFT 9 -#define OMAP3430ES1_AUTO_FAC (1 << 8) +#define OMAP3430ES1_AUTO_FAC_MASK (1 << 8) #define OMAP3430ES1_AUTO_FAC_SHIFT 8 -#define OMAP3430_AUTO_MAILBOXES (1 << 7) +#define OMAP3430_AUTO_MAILBOXES_MASK (1 << 7) #define OMAP3430_AUTO_MAILBOXES_SHIFT 7 -#define OMAP3430_AUTO_OMAPCTRL (1 << 6) +#define OMAP3430_AUTO_OMAPCTRL_MASK (1 << 6) #define OMAP3430_AUTO_OMAPCTRL_SHIFT 6 -#define OMAP3430ES1_AUTO_FSHOSTUSB (1 << 5) +#define OMAP3430ES1_AUTO_FSHOSTUSB_MASK (1 << 5) #define OMAP3430ES1_AUTO_FSHOSTUSB_SHIFT 5 -#define OMAP3430_AUTO_HSOTGUSB (1 << 4) +#define OMAP3430_AUTO_HSOTGUSB_MASK (1 << 4) #define OMAP3430_AUTO_HSOTGUSB_SHIFT 4 -#define OMAP3430ES1_AUTO_D2D (1 << 3) +#define OMAP3430ES1_AUTO_D2D_MASK (1 << 3) #define OMAP3430ES1_AUTO_D2D_SHIFT 3 -#define OMAP3430_AUTO_SAD2D (1 << 3) +#define OMAP3430_AUTO_SAD2D_MASK (1 << 3) #define OMAP3430_AUTO_SAD2D_SHIFT 3 -#define OMAP3430_AUTO_SSI (1 << 0) +#define OMAP3430_AUTO_SSI_MASK (1 << 0) #define OMAP3430_AUTO_SSI_SHIFT 0 /* CM_AUTOIDLE2_CORE */ -#define OMAP3430_AUTO_PKA (1 << 4) +#define OMAP3430_AUTO_PKA_MASK (1 << 4) #define OMAP3430_AUTO_PKA_SHIFT 4 -#define OMAP3430_AUTO_AES1 (1 << 3) +#define OMAP3430_AUTO_AES1_MASK (1 << 3) #define OMAP3430_AUTO_AES1_SHIFT 3 -#define OMAP3430_AUTO_RNG (1 << 2) +#define OMAP3430_AUTO_RNG_MASK (1 << 2) #define OMAP3430_AUTO_RNG_SHIFT 2 -#define OMAP3430_AUTO_SHA11 (1 << 1) +#define OMAP3430_AUTO_SHA11_MASK (1 << 1) #define OMAP3430_AUTO_SHA11_SHIFT 1 -#define OMAP3430_AUTO_DES1 (1 << 0) +#define OMAP3430_AUTO_DES1_MASK (1 << 0) #define OMAP3430_AUTO_DES1_SHIFT 0 /* CM_AUTOIDLE3_CORE */ @@ -331,7 +331,7 @@ #define OMAP3430ES2_AUTO_USBTLL_SHIFT 2 #define OMAP3430ES2_AUTO_USBTLL_MASK (1 << 2) #define OMAP3430_AUTO_MAD2D_SHIFT 3 -#define OMAP3430_AUTO_MAD2D (1 << 3) +#define OMAP3430_AUTO_MAD2D_MASK (1 << 3) /* CM_CLKSEL_CORE */ #define OMAP3430_CLKSEL_SSI_SHIFT 8 @@ -366,9 +366,9 @@ #define OMAP3430_CLKACTIVITY_L3_MASK (1 << 0) /* CM_FCLKEN_GFX */ -#define OMAP3430ES1_EN_3D (1 << 2) +#define OMAP3430ES1_EN_3D_MASK (1 << 2) #define OMAP3430ES1_EN_3D_SHIFT 2 -#define OMAP3430ES1_EN_2D (1 << 1) +#define OMAP3430ES1_EN_2D_MASK (1 << 1) #define OMAP3430ES1_EN_2D_SHIFT 1 /* CM_ICLKEN_GFX specific bits */ @@ -416,9 +416,9 @@ #define OMAP3430ES2_EN_USIMOCP_MASK (1 << 9) /* CM_ICLKEN_WKUP specific bits */ -#define OMAP3430_EN_WDT1 (1 << 4) +#define OMAP3430_EN_WDT1_MASK (1 << 4) #define OMAP3430_EN_WDT1_SHIFT 4 -#define OMAP3430_EN_32KSYNC (1 << 2) +#define OMAP3430_EN_32KSYNC_MASK (1 << 2) #define OMAP3430_EN_32KSYNC_SHIFT 2 /* CM_IDLEST_WKUP specific bits */ @@ -432,19 +432,19 @@ #define OMAP3430_ST_32KSYNC_MASK (1 << 2) /* CM_AUTOIDLE_WKUP */ -#define OMAP3430ES2_AUTO_USIMOCP (1 << 9) +#define OMAP3430ES2_AUTO_USIMOCP_MASK (1 << 9) #define OMAP3430ES2_AUTO_USIMOCP_SHIFT 9 -#define OMAP3430_AUTO_WDT2 (1 << 5) +#define OMAP3430_AUTO_WDT2_MASK (1 << 5) #define OMAP3430_AUTO_WDT2_SHIFT 5 -#define OMAP3430_AUTO_WDT1 (1 << 4) +#define OMAP3430_AUTO_WDT1_MASK (1 << 4) #define OMAP3430_AUTO_WDT1_SHIFT 4 -#define OMAP3430_AUTO_GPIO1 (1 << 3) +#define OMAP3430_AUTO_GPIO1_MASK (1 << 3) #define OMAP3430_AUTO_GPIO1_SHIFT 3 -#define OMAP3430_AUTO_32KSYNC (1 << 2) +#define OMAP3430_AUTO_32KSYNC_MASK (1 << 2) #define OMAP3430_AUTO_32KSYNC_SHIFT 2 -#define OMAP3430_AUTO_GPT12 (1 << 1) +#define OMAP3430_AUTO_GPT12_MASK (1 << 1) #define OMAP3430_AUTO_GPT12_SHIFT 1 -#define OMAP3430_AUTO_GPT1 (1 << 0) +#define OMAP3430_AUTO_GPT1_MASK (1 << 0) #define OMAP3430_AUTO_GPT1_SHIFT 0 /* CM_CLKSEL_WKUP */ @@ -479,7 +479,7 @@ #define OMAP3430_EN_CORE_DPLL_MASK (0x7 << 0) /* CM_CLKEN2_PLL */ -#define OMAP3430ES2_EN_PERIPH2_DPLL_LPMODE_SHIFT 10 +#define OMAP3430ES2_EN_PERIPH2_DPLL_LPMODE_SHIFT 10 #define OMAP3430ES2_PERIPH2_DPLL_RAMPTIME_MASK (0x3 << 8) #define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_SHIFT 4 #define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK (0xf << 4) @@ -488,10 +488,10 @@ #define OMAP3430ES2_EN_PERIPH2_DPLL_MASK (0x7 << 0) /* CM_IDLEST_CKGEN */ -#define OMAP3430_ST_54M_CLK (1 << 5) -#define OMAP3430_ST_12M_CLK (1 << 4) -#define OMAP3430_ST_48M_CLK (1 << 3) -#define OMAP3430_ST_96M_CLK (1 << 2) +#define OMAP3430_ST_54M_CLK_MASK (1 << 5) +#define OMAP3430_ST_12M_CLK_MASK (1 << 4) +#define OMAP3430_ST_48M_CLK_MASK (1 << 3) +#define OMAP3430_ST_96M_CLK_MASK (1 << 2) #define OMAP3430_ST_PERIPH_CLK_SHIFT 1 #define OMAP3430_ST_PERIPH_CLK_MASK (1 << 1) #define OMAP3430_ST_CORE_CLK_SHIFT 0 @@ -558,22 +558,22 @@ /* CM_CLKOUT_CTRL */ #define OMAP3430_CLKOUT2_EN_SHIFT 7 -#define OMAP3430_CLKOUT2_EN (1 << 7) +#define OMAP3430_CLKOUT2_EN_MASK (1 << 7) #define OMAP3430_CLKOUT2_DIV_SHIFT 3 #define OMAP3430_CLKOUT2_DIV_MASK (0x7 << 3) #define OMAP3430_CLKOUT2SOURCE_SHIFT 0 #define OMAP3430_CLKOUT2SOURCE_MASK (0x3 << 0) /* CM_FCLKEN_DSS */ -#define OMAP3430_EN_TV (1 << 2) +#define OMAP3430_EN_TV_MASK (1 << 2) #define OMAP3430_EN_TV_SHIFT 2 -#define OMAP3430_EN_DSS2 (1 << 1) +#define OMAP3430_EN_DSS2_MASK (1 << 1) #define OMAP3430_EN_DSS2_SHIFT 1 -#define OMAP3430_EN_DSS1 (1 << 0) +#define OMAP3430_EN_DSS1_MASK (1 << 0) #define OMAP3430_EN_DSS1_SHIFT 0 /* CM_ICLKEN_DSS */ -#define OMAP3430_CM_ICLKEN_DSS_EN_DSS (1 << 0) +#define OMAP3430_CM_ICLKEN_DSS_EN_DSS_MASK (1 << 0) #define OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT 0 /* CM_IDLEST_DSS */ @@ -585,7 +585,7 @@ #define OMAP3430ES1_ST_DSS_MASK (1 << 0) /* CM_AUTOIDLE_DSS */ -#define OMAP3430_AUTO_DSS (1 << 0) +#define OMAP3430_AUTO_DSS_MASK (1 << 0) #define OMAP3430_AUTO_DSS_SHIFT 0 /* CM_CLKSEL_DSS */ @@ -607,16 +607,16 @@ #define OMAP3430_CLKACTIVITY_DSS_MASK (1 << 0) /* CM_FCLKEN_CAM specific bits */ -#define OMAP3430_EN_CSI2 (1 << 1) +#define OMAP3430_EN_CSI2_MASK (1 << 1) #define OMAP3430_EN_CSI2_SHIFT 1 /* CM_ICLKEN_CAM specific bits */ /* CM_IDLEST_CAM */ -#define OMAP3430_ST_CAM (1 << 0) +#define OMAP3430_ST_CAM_MASK (1 << 0) /* CM_AUTOIDLE_CAM */ -#define OMAP3430_AUTO_CAM (1 << 0) +#define OMAP3430_AUTO_CAM_MASK (1 << 0) #define OMAP3430_AUTO_CAM_SHIFT 0 /* CM_CLKSEL_CAM */ @@ -649,41 +649,41 @@ #define OMAP3430_ST_MCBSP2_MASK (1 << 0) /* CM_AUTOIDLE_PER */ -#define OMAP3430_AUTO_GPIO6 (1 << 17) +#define OMAP3430_AUTO_GPIO6_MASK (1 << 17) #define OMAP3430_AUTO_GPIO6_SHIFT 17 -#define OMAP3430_AUTO_GPIO5 (1 << 16) +#define OMAP3430_AUTO_GPIO5_MASK (1 << 16) #define OMAP3430_AUTO_GPIO5_SHIFT 16 -#define OMAP3430_AUTO_GPIO4 (1 << 15) +#define OMAP3430_AUTO_GPIO4_MASK (1 << 15) #define OMAP3430_AUTO_GPIO4_SHIFT 15 -#define OMAP3430_AUTO_GPIO3 (1 << 14) +#define OMAP3430_AUTO_GPIO3_MASK (1 << 14) #define OMAP3430_AUTO_GPIO3_SHIFT 14 -#define OMAP3430_AUTO_GPIO2 (1 << 13) +#define OMAP3430_AUTO_GPIO2_MASK (1 << 13) #define OMAP3430_AUTO_GPIO2_SHIFT 13 -#define OMAP3430_AUTO_WDT3 (1 << 12) +#define OMAP3430_AUTO_WDT3_MASK (1 << 12) #define OMAP3430_AUTO_WDT3_SHIFT 12 -#define OMAP3430_AUTO_UART3 (1 << 11) +#define OMAP3430_AUTO_UART3_MASK (1 << 11) #define OMAP3430_AUTO_UART3_SHIFT 11 -#define OMAP3430_AUTO_GPT9 (1 << 10) +#define OMAP3430_AUTO_GPT9_MASK (1 << 10) #define OMAP3430_AUTO_GPT9_SHIFT 10 -#define OMAP3430_AUTO_GPT8 (1 << 9) +#define OMAP3430_AUTO_GPT8_MASK (1 << 9) #define OMAP3430_AUTO_GPT8_SHIFT 9 -#define OMAP3430_AUTO_GPT7 (1 << 8) +#define OMAP3430_AUTO_GPT7_MASK (1 << 8) #define OMAP3430_AUTO_GPT7_SHIFT 8 -#define OMAP3430_AUTO_GPT6 (1 << 7) +#define OMAP3430_AUTO_GPT6_MASK (1 << 7) #define OMAP3430_AUTO_GPT6_SHIFT 7 -#define OMAP3430_AUTO_GPT5 (1 << 6) +#define OMAP3430_AUTO_GPT5_MASK (1 << 6) #define OMAP3430_AUTO_GPT5_SHIFT 6 -#define OMAP3430_AUTO_GPT4 (1 << 5) +#define OMAP3430_AUTO_GPT4_MASK (1 << 5) #define OMAP3430_AUTO_GPT4_SHIFT 5 -#define OMAP3430_AUTO_GPT3 (1 << 4) +#define OMAP3430_AUTO_GPT3_MASK (1 << 4) #define OMAP3430_AUTO_GPT3_SHIFT 4 -#define OMAP3430_AUTO_GPT2 (1 << 3) +#define OMAP3430_AUTO_GPT2_MASK (1 << 3) #define OMAP3430_AUTO_GPT2_SHIFT 3 -#define OMAP3430_AUTO_MCBSP4 (1 << 2) +#define OMAP3430_AUTO_MCBSP4_MASK (1 << 2) #define OMAP3430_AUTO_MCBSP4_SHIFT 2 -#define OMAP3430_AUTO_MCBSP3 (1 << 1) +#define OMAP3430_AUTO_MCBSP3_MASK (1 << 1) #define OMAP3430_AUTO_MCBSP3_SHIFT 1 -#define OMAP3430_AUTO_MCBSP2 (1 << 0) +#define OMAP3430_AUTO_MCBSP2_MASK (1 << 0) #define OMAP3430_AUTO_MCBSP2_SHIFT 0 /* CM_CLKSEL_PER */ @@ -705,7 +705,7 @@ #define OMAP3430_CLKSEL_GPT2_SHIFT 0 /* CM_SLEEPDEP_PER specific bits */ -#define OMAP3430_CM_SLEEPDEP_PER_EN_IVA2 (1 << 2) +#define OMAP3430_CM_SLEEPDEP_PER_EN_IVA2_MASK (1 << 2) /* CM_CLKSTCTRL_PER */ #define OMAP3430_CLKTRCTRL_PER_SHIFT 0 @@ -755,10 +755,10 @@ #define OMAP3430_PERIPH_DPLL_EMU_DIV_MASK (0x7f << 0) /* CM_POLCTRL */ -#define OMAP3430_CLKOUT2_POL (1 << 0) +#define OMAP3430_CLKOUT2_POL_MASK (1 << 0) /* CM_IDLEST_NEON */ -#define OMAP3430_ST_NEON (1 << 0) +#define OMAP3430_ST_NEON_MASK (1 << 0) /* CM_CLKSTCTRL_NEON */ #define OMAP3430_CLKTRCTRL_NEON_SHIFT 0 diff --git a/arch/arm/mach-omap2/cm.c b/arch/arm/mach-omap2/cm.c index 58e4a1c557d8..2d83565d2be2 100644 --- a/arch/arm/mach-omap2/cm.c +++ b/arch/arm/mach-omap2/cm.c @@ -27,9 +27,6 @@ #include "cm-regbits-24xx.h" #include "cm-regbits-34xx.h" -/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */ -#define MAX_MODULE_READY_TIME 20000 - static const u8 cm_idlest_offs[] = { CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3 }; diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index 94728b1ee3c4..a02ca30423dc 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -112,7 +112,7 @@ extern u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx); extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift); -extern int omap4_cm_wait_module_ready(u32 prcm_mod, u8 prcm_dev_offs); +extern int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg); static inline u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) { @@ -134,13 +134,23 @@ static inline u32 cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) /* CM_ICLKEN_GFX */ #define OMAP_EN_GFX_SHIFT 0 -#define OMAP_EN_GFX (1 << 0) +#define OMAP_EN_GFX_MASK (1 << 0) /* CM_IDLEST_GFX */ -#define OMAP_ST_GFX (1 << 0) +#define OMAP_ST_GFX_MASK (1 << 0) + /* CM_IDLEST indicator */ #define OMAP24XX_CM_IDLEST_VAL 0 #define OMAP34XX_CM_IDLEST_VAL 1 +/* + * MAX_MODULE_READY_TIME: max duration in microseconds to wait for the + * PRCM to request that a module exit the inactive state in the case of + * OMAP2 & 3. + * In the case of OMAP4 this is the max duration in microseconds for the + * module to reach the functionnal state from an inactive state. + */ +#define MAX_MODULE_READY_TIME 2000 + #endif diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h index c575b9b0c041..336d94889e5b 100644 --- a/arch/arm/mach-omap2/cm44xx.h +++ b/arch/arm/mach-omap2/cm44xx.h @@ -1,8 +1,8 @@ /* * OMAP44xx CM1 & CM2 instance offset macros * - * Copyright (C) 2009 Texas Instruments, Inc. - * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2009-2010 Texas Instruments, Inc. + * Copyright (C) 2009-2010 Nokia Corporation * * Paul Walmsley (paul@pwsan.com) * Rajendra Nayak (rnayak@ti.com) @@ -25,334 +25,557 @@ /* CM1 */ - /* CM1.OCP_SOCKET_CM1 register offsets */ +#define OMAP4_REVISION_CM1_OFFSET 0x0000 #define OMAP4430_REVISION_CM1 OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_MOD, 0x0000) +#define OMAP4_CM_CM1_PROFILING_CLKCTRL_OFFSET 0x0040 #define OMAP4430_CM_CM1_PROFILING_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_MOD, 0x0040) /* CM1.CKGEN_CM1 register offsets */ +#define OMAP4_CM_CLKSEL_CORE_OFFSET 0x0000 #define OMAP4430_CM_CLKSEL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0000) +#define OMAP4_CM_CLKSEL_ABE_OFFSET 0x0008 #define OMAP4430_CM_CLKSEL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0008) +#define OMAP4_CM_DLL_CTRL_OFFSET 0x0010 #define OMAP4430_CM_DLL_CTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0010) +#define OMAP4_CM_CLKMODE_DPLL_CORE_OFFSET 0x0020 #define OMAP4430_CM_CLKMODE_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0020) +#define OMAP4_CM_IDLEST_DPLL_CORE_OFFSET 0x0024 #define OMAP4430_CM_IDLEST_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0024) +#define OMAP4_CM_AUTOIDLE_DPLL_CORE_OFFSET 0x0028 #define OMAP4430_CM_AUTOIDLE_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0028) +#define OMAP4_CM_CLKSEL_DPLL_CORE_OFFSET 0x002c #define OMAP4430_CM_CLKSEL_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x002c) +#define OMAP4_CM_DIV_M2_DPLL_CORE_OFFSET 0x0030 #define OMAP4430_CM_DIV_M2_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0030) +#define OMAP4_CM_DIV_M3_DPLL_CORE_OFFSET 0x0034 #define OMAP4430_CM_DIV_M3_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0034) +#define OMAP4_CM_DIV_M4_DPLL_CORE_OFFSET 0x0038 #define OMAP4430_CM_DIV_M4_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0038) +#define OMAP4_CM_DIV_M5_DPLL_CORE_OFFSET 0x003c #define OMAP4430_CM_DIV_M5_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x003c) +#define OMAP4_CM_DIV_M6_DPLL_CORE_OFFSET 0x0040 #define OMAP4430_CM_DIV_M6_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0040) +#define OMAP4_CM_DIV_M7_DPLL_CORE_OFFSET 0x0044 #define OMAP4430_CM_DIV_M7_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0044) +#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET 0x0048 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0048) +#define OMAP4_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET 0x004c #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x004c) +#define OMAP4_CM_EMU_OVERRIDE_DPLL_CORE_OFFSET 0x0050 #define OMAP4430_CM_EMU_OVERRIDE_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0050) +#define OMAP4_CM_CLKMODE_DPLL_MPU_OFFSET 0x0060 #define OMAP4430_CM_CLKMODE_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0060) +#define OMAP4_CM_IDLEST_DPLL_MPU_OFFSET 0x0064 #define OMAP4430_CM_IDLEST_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0064) +#define OMAP4_CM_AUTOIDLE_DPLL_MPU_OFFSET 0x0068 #define OMAP4430_CM_AUTOIDLE_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0068) +#define OMAP4_CM_CLKSEL_DPLL_MPU_OFFSET 0x006c #define OMAP4430_CM_CLKSEL_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x006c) +#define OMAP4_CM_DIV_M2_DPLL_MPU_OFFSET 0x0070 #define OMAP4430_CM_DIV_M2_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0070) +#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET 0x0088 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0088) +#define OMAP4_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET 0x008c #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x008c) +#define OMAP4_CM_BYPCLK_DPLL_MPU_OFFSET 0x009c #define OMAP4430_CM_BYPCLK_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x009c) +#define OMAP4_CM_CLKMODE_DPLL_IVA_OFFSET 0x00a0 #define OMAP4430_CM_CLKMODE_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a0) +#define OMAP4_CM_IDLEST_DPLL_IVA_OFFSET 0x00a4 #define OMAP4430_CM_IDLEST_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a4) +#define OMAP4_CM_AUTOIDLE_DPLL_IVA_OFFSET 0x00a8 #define OMAP4430_CM_AUTOIDLE_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a8) +#define OMAP4_CM_CLKSEL_DPLL_IVA_OFFSET 0x00ac #define OMAP4430_CM_CLKSEL_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00ac) +#define OMAP4_CM_DIV_M4_DPLL_IVA_OFFSET 0x00b8 #define OMAP4430_CM_DIV_M4_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00b8) +#define OMAP4_CM_DIV_M5_DPLL_IVA_OFFSET 0x00bc #define OMAP4430_CM_DIV_M5_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00bc) +#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_IVA_OFFSET 0x00c8 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00c8) +#define OMAP4_CM_SSC_MODFREQDIV_DPLL_IVA_OFFSET 0x00cc #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00cc) +#define OMAP4_CM_BYPCLK_DPLL_IVA_OFFSET 0x00dc #define OMAP4430_CM_BYPCLK_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00dc) +#define OMAP4_CM_CLKMODE_DPLL_ABE_OFFSET 0x00e0 #define OMAP4430_CM_CLKMODE_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e0) +#define OMAP4_CM_IDLEST_DPLL_ABE_OFFSET 0x00e4 #define OMAP4430_CM_IDLEST_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e4) +#define OMAP4_CM_AUTOIDLE_DPLL_ABE_OFFSET 0x00e8 #define OMAP4430_CM_AUTOIDLE_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e8) +#define OMAP4_CM_CLKSEL_DPLL_ABE_OFFSET 0x00ec #define OMAP4430_CM_CLKSEL_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00ec) +#define OMAP4_CM_DIV_M2_DPLL_ABE_OFFSET 0x00f0 #define OMAP4430_CM_DIV_M2_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00f0) +#define OMAP4_CM_DIV_M3_DPLL_ABE_OFFSET 0x00f4 #define OMAP4430_CM_DIV_M3_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00f4) +#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_ABE_OFFSET 0x0108 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0108) +#define OMAP4_CM_SSC_MODFREQDIV_DPLL_ABE_OFFSET 0x010c #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x010c) +#define OMAP4_CM_CLKMODE_DPLL_DDRPHY_OFFSET 0x0120 #define OMAP4430_CM_CLKMODE_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0120) +#define OMAP4_CM_IDLEST_DPLL_DDRPHY_OFFSET 0x0124 #define OMAP4430_CM_IDLEST_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0124) +#define OMAP4_CM_AUTOIDLE_DPLL_DDRPHY_OFFSET 0x0128 #define OMAP4430_CM_AUTOIDLE_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0128) +#define OMAP4_CM_CLKSEL_DPLL_DDRPHY_OFFSET 0x012c #define OMAP4430_CM_CLKSEL_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x012c) +#define OMAP4_CM_DIV_M2_DPLL_DDRPHY_OFFSET 0x0130 #define OMAP4430_CM_DIV_M2_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0130) +#define OMAP4_CM_DIV_M4_DPLL_DDRPHY_OFFSET 0x0138 #define OMAP4430_CM_DIV_M4_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0138) +#define OMAP4_CM_DIV_M5_DPLL_DDRPHY_OFFSET 0x013c #define OMAP4430_CM_DIV_M5_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x013c) +#define OMAP4_CM_DIV_M6_DPLL_DDRPHY_OFFSET 0x0140 #define OMAP4430_CM_DIV_M6_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0140) +#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_DDRPHY_OFFSET 0x0148 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0148) +#define OMAP4_CM_SSC_MODFREQDIV_DPLL_DDRPHY_OFFSET 0x014c #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x014c) +#define OMAP4_CM_SHADOW_FREQ_CONFIG1_OFFSET 0x0160 #define OMAP4430_CM_SHADOW_FREQ_CONFIG1 OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0160) +#define OMAP4_CM_SHADOW_FREQ_CONFIG2_OFFSET 0x0164 #define OMAP4430_CM_SHADOW_FREQ_CONFIG2 OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0164) +#define OMAP4_CM_DYN_DEP_PRESCAL_OFFSET 0x0170 #define OMAP4430_CM_DYN_DEP_PRESCAL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0170) +#define OMAP4_CM_RESTORE_ST_OFFSET 0x0180 #define OMAP4430_CM_RESTORE_ST OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0180) /* CM1.MPU_CM1 register offsets */ +#define OMAP4_CM_MPU_CLKSTCTRL_OFFSET 0x0000 #define OMAP4430_CM_MPU_CLKSTCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0000) +#define OMAP4_CM_MPU_STATICDEP_OFFSET 0x0004 #define OMAP4430_CM_MPU_STATICDEP OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0004) +#define OMAP4_CM_MPU_DYNAMICDEP_OFFSET 0x0008 #define OMAP4430_CM_MPU_DYNAMICDEP OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0008) +#define OMAP4_CM_MPU_MPU_CLKCTRL_OFFSET 0x0020 #define OMAP4430_CM_MPU_MPU_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0020) /* CM1.TESLA_CM1 register offsets */ +#define OMAP4_CM_TESLA_CLKSTCTRL_OFFSET 0x0000 #define OMAP4430_CM_TESLA_CLKSTCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0000) +#define OMAP4_CM_TESLA_STATICDEP_OFFSET 0x0004 #define OMAP4430_CM_TESLA_STATICDEP OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0004) +#define OMAP4_CM_TESLA_DYNAMICDEP_OFFSET 0x0008 #define OMAP4430_CM_TESLA_DYNAMICDEP OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0008) +#define OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET 0x0020 #define OMAP4430_CM_TESLA_TESLA_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0020) /* CM1.ABE_CM1 register offsets */ +#define OMAP4_CM1_ABE_CLKSTCTRL_OFFSET 0x0000 #define OMAP4430_CM1_ABE_CLKSTCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0000) +#define OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET 0x0020 #define OMAP4430_CM1_ABE_L4ABE_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0020) +#define OMAP4_CM1_ABE_AESS_CLKCTRL_OFFSET 0x0028 #define OMAP4430_CM1_ABE_AESS_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0028) +#define OMAP4_CM1_ABE_PDM_CLKCTRL_OFFSET 0x0030 #define OMAP4430_CM1_ABE_PDM_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0030) +#define OMAP4_CM1_ABE_DMIC_CLKCTRL_OFFSET 0x0038 #define OMAP4430_CM1_ABE_DMIC_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0038) +#define OMAP4_CM1_ABE_MCASP_CLKCTRL_OFFSET 0x0040 #define OMAP4430_CM1_ABE_MCASP_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0040) +#define OMAP4_CM1_ABE_MCBSP1_CLKCTRL_OFFSET 0x0048 #define OMAP4430_CM1_ABE_MCBSP1_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0048) +#define OMAP4_CM1_ABE_MCBSP2_CLKCTRL_OFFSET 0x0050 #define OMAP4430_CM1_ABE_MCBSP2_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0050) +#define OMAP4_CM1_ABE_MCBSP3_CLKCTRL_OFFSET 0x0058 #define OMAP4430_CM1_ABE_MCBSP3_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0058) +#define OMAP4_CM1_ABE_SLIMBUS_CLKCTRL_OFFSET 0x0060 #define OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0060) +#define OMAP4_CM1_ABE_TIMER5_CLKCTRL_OFFSET 0x0068 #define OMAP4430_CM1_ABE_TIMER5_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0068) +#define OMAP4_CM1_ABE_TIMER6_CLKCTRL_OFFSET 0x0070 #define OMAP4430_CM1_ABE_TIMER6_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0070) +#define OMAP4_CM1_ABE_TIMER7_CLKCTRL_OFFSET 0x0078 #define OMAP4430_CM1_ABE_TIMER7_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0078) +#define OMAP4_CM1_ABE_TIMER8_CLKCTRL_OFFSET 0x0080 #define OMAP4430_CM1_ABE_TIMER8_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0080) +#define OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET 0x0088 #define OMAP4430_CM1_ABE_WDT3_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0088) -/* CM1.RESTORE_CM1 register offsets */ -#define OMAP4430_CM_CLKSEL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0000) -#define OMAP4430_CM_DIV_M2_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0004) -#define OMAP4430_CM_DIV_M3_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0008) -#define OMAP4430_CM_DIV_M4_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x000c) -#define OMAP4430_CM_DIV_M5_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0010) -#define OMAP4430_CM_DIV_M6_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0014) -#define OMAP4430_CM_DIV_M7_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0018) -#define OMAP4430_CM_CLKSEL_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x001c) -#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0020) -#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0024) -#define OMAP4430_CM_CLKMODE_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0028) -#define OMAP4430_CM_SHADOW_FREQ_CONFIG1_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x002c) -#define OMAP4430_CM_AUTOIDLE_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0030) -#define OMAP4430_CM_MPU_CLKSTCTRL_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0034) - /* CM2 */ - /* CM2.OCP_SOCKET_CM2 register offsets */ +#define OMAP4_REVISION_CM2_OFFSET 0x0000 #define OMAP4430_REVISION_CM2 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_MOD, 0x0000) +#define OMAP4_CM_CM2_PROFILING_CLKCTRL_OFFSET 0x0040 #define OMAP4430_CM_CM2_PROFILING_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_MOD, 0x0040) /* CM2.CKGEN_CM2 register offsets */ +#define OMAP4_CM_CLKSEL_DUCATI_ISS_ROOT_OFFSET 0x0000 #define OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0000) +#define OMAP4_CM_CLKSEL_USB_60MHZ_OFFSET 0x0004 #define OMAP4430_CM_CLKSEL_USB_60MHZ OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0004) +#define OMAP4_CM_SCALE_FCLK_OFFSET 0x0008 #define OMAP4430_CM_SCALE_FCLK OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0008) +#define OMAP4_CM_CORE_DVFS_PERF1_OFFSET 0x0010 #define OMAP4430_CM_CORE_DVFS_PERF1 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0010) +#define OMAP4_CM_CORE_DVFS_PERF2_OFFSET 0x0014 #define OMAP4430_CM_CORE_DVFS_PERF2 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0014) +#define OMAP4_CM_CORE_DVFS_PERF3_OFFSET 0x0018 #define OMAP4430_CM_CORE_DVFS_PERF3 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0018) +#define OMAP4_CM_CORE_DVFS_PERF4_OFFSET 0x001c #define OMAP4430_CM_CORE_DVFS_PERF4 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x001c) +#define OMAP4_CM_CORE_DVFS_CURRENT_OFFSET 0x0024 #define OMAP4430_CM_CORE_DVFS_CURRENT OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0024) +#define OMAP4_CM_IVA_DVFS_PERF_TESLA_OFFSET 0x0028 #define OMAP4430_CM_IVA_DVFS_PERF_TESLA OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0028) +#define OMAP4_CM_IVA_DVFS_PERF_IVAHD_OFFSET 0x002c #define OMAP4430_CM_IVA_DVFS_PERF_IVAHD OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x002c) +#define OMAP4_CM_IVA_DVFS_PERF_ABE_OFFSET 0x0030 #define OMAP4430_CM_IVA_DVFS_PERF_ABE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0030) +#define OMAP4_CM_IVA_DVFS_CURRENT_OFFSET 0x0038 #define OMAP4430_CM_IVA_DVFS_CURRENT OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0038) +#define OMAP4_CM_CLKMODE_DPLL_PER_OFFSET 0x0040 #define OMAP4430_CM_CLKMODE_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0040) +#define OMAP4_CM_IDLEST_DPLL_PER_OFFSET 0x0044 #define OMAP4430_CM_IDLEST_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0044) +#define OMAP4_CM_AUTOIDLE_DPLL_PER_OFFSET 0x0048 #define OMAP4430_CM_AUTOIDLE_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0048) +#define OMAP4_CM_CLKSEL_DPLL_PER_OFFSET 0x004c #define OMAP4430_CM_CLKSEL_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x004c) +#define OMAP4_CM_DIV_M2_DPLL_PER_OFFSET 0x0050 #define OMAP4430_CM_DIV_M2_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0050) +#define OMAP4_CM_DIV_M3_DPLL_PER_OFFSET 0x0054 #define OMAP4430_CM_DIV_M3_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0054) +#define OMAP4_CM_DIV_M4_DPLL_PER_OFFSET 0x0058 #define OMAP4430_CM_DIV_M4_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0058) +#define OMAP4_CM_DIV_M5_DPLL_PER_OFFSET 0x005c #define OMAP4430_CM_DIV_M5_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x005c) +#define OMAP4_CM_DIV_M6_DPLL_PER_OFFSET 0x0060 #define OMAP4430_CM_DIV_M6_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0060) +#define OMAP4_CM_DIV_M7_DPLL_PER_OFFSET 0x0064 #define OMAP4430_CM_DIV_M7_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0064) +#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET 0x0068 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0068) +#define OMAP4_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET 0x006c #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x006c) +#define OMAP4_CM_EMU_OVERRIDE_DPLL_PER_OFFSET 0x0070 #define OMAP4430_CM_EMU_OVERRIDE_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0070) +#define OMAP4_CM_CLKMODE_DPLL_USB_OFFSET 0x0080 #define OMAP4430_CM_CLKMODE_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0080) +#define OMAP4_CM_IDLEST_DPLL_USB_OFFSET 0x0084 #define OMAP4430_CM_IDLEST_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0084) +#define OMAP4_CM_AUTOIDLE_DPLL_USB_OFFSET 0x0088 #define OMAP4430_CM_AUTOIDLE_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0088) +#define OMAP4_CM_CLKSEL_DPLL_USB_OFFSET 0x008c #define OMAP4430_CM_CLKSEL_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x008c) +#define OMAP4_CM_DIV_M2_DPLL_USB_OFFSET 0x0090 #define OMAP4430_CM_DIV_M2_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0090) +#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_USB_OFFSET 0x00a8 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00a8) +#define OMAP4_CM_SSC_MODFREQDIV_DPLL_USB_OFFSET 0x00ac #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00ac) +#define OMAP4_CM_CLKDCOLDO_DPLL_USB_OFFSET 0x00b4 #define OMAP4430_CM_CLKDCOLDO_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00b4) +#define OMAP4_CM_CLKMODE_DPLL_UNIPRO_OFFSET 0x00c0 #define OMAP4430_CM_CLKMODE_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c0) +#define OMAP4_CM_IDLEST_DPLL_UNIPRO_OFFSET 0x00c4 #define OMAP4430_CM_IDLEST_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c4) +#define OMAP4_CM_AUTOIDLE_DPLL_UNIPRO_OFFSET 0x00c8 #define OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c8) +#define OMAP4_CM_CLKSEL_DPLL_UNIPRO_OFFSET 0x00cc #define OMAP4430_CM_CLKSEL_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00cc) +#define OMAP4_CM_DIV_M2_DPLL_UNIPRO_OFFSET 0x00d0 #define OMAP4430_CM_DIV_M2_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00d0) +#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_UNIPRO_OFFSET 0x00e8 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00e8) +#define OMAP4_CM_SSC_MODFREQDIV_DPLL_UNIPRO_OFFSET 0x00ec #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00ec) /* CM2.ALWAYS_ON_CM2 register offsets */ +#define OMAP4_CM_ALWON_CLKSTCTRL_OFFSET 0x0000 #define OMAP4430_CM_ALWON_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0000) +#define OMAP4_CM_ALWON_MDMINTC_CLKCTRL_OFFSET 0x0020 #define OMAP4430_CM_ALWON_MDMINTC_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0020) +#define OMAP4_CM_ALWON_SR_MPU_CLKCTRL_OFFSET 0x0028 #define OMAP4430_CM_ALWON_SR_MPU_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0028) +#define OMAP4_CM_ALWON_SR_IVA_CLKCTRL_OFFSET 0x0030 #define OMAP4430_CM_ALWON_SR_IVA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0030) +#define OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET 0x0038 #define OMAP4430_CM_ALWON_SR_CORE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0038) /* CM2.CORE_CM2 register offsets */ +#define OMAP4_CM_L3_1_CLKSTCTRL_OFFSET 0x0000 #define OMAP4430_CM_L3_1_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0000) +#define OMAP4_CM_L3_1_DYNAMICDEP_OFFSET 0x0008 #define OMAP4430_CM_L3_1_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0008) +#define OMAP4_CM_L3_1_L3_1_CLKCTRL_OFFSET 0x0020 #define OMAP4430_CM_L3_1_L3_1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0020) +#define OMAP4_CM_L3_2_CLKSTCTRL_OFFSET 0x0100 #define OMAP4430_CM_L3_2_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0100) +#define OMAP4_CM_L3_2_DYNAMICDEP_OFFSET 0x0108 #define OMAP4430_CM_L3_2_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0108) +#define OMAP4_CM_L3_2_L3_2_CLKCTRL_OFFSET 0x0120 #define OMAP4430_CM_L3_2_L3_2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0120) +#define OMAP4_CM_L3_2_GPMC_CLKCTRL_OFFSET 0x0128 #define OMAP4430_CM_L3_2_GPMC_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0128) +#define OMAP4_CM_L3_2_OCMC_RAM_CLKCTRL_OFFSET 0x0130 #define OMAP4430_CM_L3_2_OCMC_RAM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0130) +#define OMAP4_CM_DUCATI_CLKSTCTRL_OFFSET 0x0200 #define OMAP4430_CM_DUCATI_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0200) +#define OMAP4_CM_DUCATI_STATICDEP_OFFSET 0x0204 #define OMAP4430_CM_DUCATI_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0204) +#define OMAP4_CM_DUCATI_DYNAMICDEP_OFFSET 0x0208 #define OMAP4430_CM_DUCATI_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0208) +#define OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET 0x0220 #define OMAP4430_CM_DUCATI_DUCATI_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0220) +#define OMAP4_CM_SDMA_CLKSTCTRL_OFFSET 0x0300 #define OMAP4430_CM_SDMA_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0300) +#define OMAP4_CM_SDMA_STATICDEP_OFFSET 0x0304 #define OMAP4430_CM_SDMA_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0304) +#define OMAP4_CM_SDMA_DYNAMICDEP_OFFSET 0x0308 #define OMAP4430_CM_SDMA_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0308) +#define OMAP4_CM_SDMA_SDMA_CLKCTRL_OFFSET 0x0320 #define OMAP4430_CM_SDMA_SDMA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0320) +#define OMAP4_CM_MEMIF_CLKSTCTRL_OFFSET 0x0400 #define OMAP4430_CM_MEMIF_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0400) +#define OMAP4_CM_MEMIF_DMM_CLKCTRL_OFFSET 0x0420 #define OMAP4430_CM_MEMIF_DMM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0420) +#define OMAP4_CM_MEMIF_EMIF_FW_CLKCTRL_OFFSET 0x0428 #define OMAP4430_CM_MEMIF_EMIF_FW_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0428) +#define OMAP4_CM_MEMIF_EMIF_1_CLKCTRL_OFFSET 0x0430 #define OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0430) +#define OMAP4_CM_MEMIF_EMIF_2_CLKCTRL_OFFSET 0x0438 #define OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0438) +#define OMAP4_CM_MEMIF_DLL_CLKCTRL_OFFSET 0x0440 #define OMAP4430_CM_MEMIF_DLL_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0440) +#define OMAP4_CM_MEMIF_EMIF_H1_CLKCTRL_OFFSET 0x0450 #define OMAP4430_CM_MEMIF_EMIF_H1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0450) +#define OMAP4_CM_MEMIF_EMIF_H2_CLKCTRL_OFFSET 0x0458 #define OMAP4430_CM_MEMIF_EMIF_H2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0458) +#define OMAP4_CM_MEMIF_DLL_H_CLKCTRL_OFFSET 0x0460 #define OMAP4430_CM_MEMIF_DLL_H_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0460) +#define OMAP4_CM_D2D_CLKSTCTRL_OFFSET 0x0500 #define OMAP4430_CM_D2D_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0500) +#define OMAP4_CM_D2D_STATICDEP_OFFSET 0x0504 #define OMAP4430_CM_D2D_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0504) +#define OMAP4_CM_D2D_DYNAMICDEP_OFFSET 0x0508 #define OMAP4430_CM_D2D_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0508) +#define OMAP4_CM_D2D_SAD2D_CLKCTRL_OFFSET 0x0520 #define OMAP4430_CM_D2D_SAD2D_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0520) +#define OMAP4_CM_D2D_MODEM_ICR_CLKCTRL_OFFSET 0x0528 #define OMAP4430_CM_D2D_MODEM_ICR_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0528) +#define OMAP4_CM_D2D_SAD2D_FW_CLKCTRL_OFFSET 0x0530 #define OMAP4430_CM_D2D_SAD2D_FW_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0530) +#define OMAP4_CM_L4CFG_CLKSTCTRL_OFFSET 0x0600 #define OMAP4430_CM_L4CFG_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0600) +#define OMAP4_CM_L4CFG_DYNAMICDEP_OFFSET 0x0608 #define OMAP4430_CM_L4CFG_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0608) +#define OMAP4_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET 0x0620 #define OMAP4430_CM_L4CFG_L4_CFG_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0620) +#define OMAP4_CM_L4CFG_HW_SEM_CLKCTRL_OFFSET 0x0628 #define OMAP4430_CM_L4CFG_HW_SEM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0628) +#define OMAP4_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET 0x0630 #define OMAP4430_CM_L4CFG_MAILBOX_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0630) +#define OMAP4_CM_L4CFG_SAR_ROM_CLKCTRL_OFFSET 0x0638 #define OMAP4430_CM_L4CFG_SAR_ROM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0638) +#define OMAP4_CM_L3INSTR_CLKSTCTRL_OFFSET 0x0700 #define OMAP4430_CM_L3INSTR_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0700) +#define OMAP4_CM_L3INSTR_L3_3_CLKCTRL_OFFSET 0x0720 #define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0720) +#define OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET 0x0728 #define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0728) +#define OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_OFFSET 0x0740 #define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0740) /* CM2.IVAHD_CM2 register offsets */ +#define OMAP4_CM_IVAHD_CLKSTCTRL_OFFSET 0x0000 #define OMAP4430_CM_IVAHD_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0000) +#define OMAP4_CM_IVAHD_STATICDEP_OFFSET 0x0004 #define OMAP4430_CM_IVAHD_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0004) +#define OMAP4_CM_IVAHD_DYNAMICDEP_OFFSET 0x0008 #define OMAP4430_CM_IVAHD_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0008) +#define OMAP4_CM_IVAHD_IVAHD_CLKCTRL_OFFSET 0x0020 #define OMAP4430_CM_IVAHD_IVAHD_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0020) +#define OMAP4_CM_IVAHD_SL2_CLKCTRL_OFFSET 0x0028 #define OMAP4430_CM_IVAHD_SL2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0028) /* CM2.CAM_CM2 register offsets */ +#define OMAP4_CM_CAM_CLKSTCTRL_OFFSET 0x0000 #define OMAP4430_CM_CAM_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0000) +#define OMAP4_CM_CAM_STATICDEP_OFFSET 0x0004 #define OMAP4430_CM_CAM_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0004) +#define OMAP4_CM_CAM_DYNAMICDEP_OFFSET 0x0008 #define OMAP4430_CM_CAM_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0008) +#define OMAP4_CM_CAM_ISS_CLKCTRL_OFFSET 0x0020 #define OMAP4430_CM_CAM_ISS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0020) +#define OMAP4_CM_CAM_FDIF_CLKCTRL_OFFSET 0x0028 #define OMAP4430_CM_CAM_FDIF_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0028) /* CM2.DSS_CM2 register offsets */ +#define OMAP4_CM_DSS_CLKSTCTRL_OFFSET 0x0000 #define OMAP4430_CM_DSS_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0000) +#define OMAP4_CM_DSS_STATICDEP_OFFSET 0x0004 #define OMAP4430_CM_DSS_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0004) +#define OMAP4_CM_DSS_DYNAMICDEP_OFFSET 0x0008 #define OMAP4430_CM_DSS_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0008) +#define OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET 0x0020 #define OMAP4430_CM_DSS_DSS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0020) +#define OMAP4_CM_DSS_DEISS_CLKCTRL_OFFSET 0x0028 #define OMAP4430_CM_DSS_DEISS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0028) /* CM2.GFX_CM2 register offsets */ +#define OMAP4_CM_GFX_CLKSTCTRL_OFFSET 0x0000 #define OMAP4430_CM_GFX_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0000) +#define OMAP4_CM_GFX_STATICDEP_OFFSET 0x0004 #define OMAP4430_CM_GFX_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0004) +#define OMAP4_CM_GFX_DYNAMICDEP_OFFSET 0x0008 #define OMAP4430_CM_GFX_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0008) +#define OMAP4_CM_GFX_GFX_CLKCTRL_OFFSET 0x0020 #define OMAP4430_CM_GFX_GFX_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0020) /* CM2.L3INIT_CM2 register offsets */ +#define OMAP4_CM_L3INIT_CLKSTCTRL_OFFSET 0x0000 #define OMAP4430_CM_L3INIT_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0000) +#define OMAP4_CM_L3INIT_STATICDEP_OFFSET 0x0004 #define OMAP4430_CM_L3INIT_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0004) +#define OMAP4_CM_L3INIT_DYNAMICDEP_OFFSET 0x0008 #define OMAP4430_CM_L3INIT_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0008) +#define OMAP4_CM_L3INIT_MMC1_CLKCTRL_OFFSET 0x0028 #define OMAP4430_CM_L3INIT_MMC1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0028) +#define OMAP4_CM_L3INIT_MMC2_CLKCTRL_OFFSET 0x0030 #define OMAP4430_CM_L3INIT_MMC2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0030) +#define OMAP4_CM_L3INIT_HSI_CLKCTRL_OFFSET 0x0038 #define OMAP4430_CM_L3INIT_HSI_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0038) +#define OMAP4_CM_L3INIT_UNIPRO1_CLKCTRL_OFFSET 0x0040 #define OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0040) +#define OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET 0x0058 #define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0058) +#define OMAP4_CM_L3INIT_USB_OTG_CLKCTRL_OFFSET 0x0060 #define OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0060) +#define OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET 0x0068 #define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0068) +#define OMAP4_CM_L3INIT_P1500_CLKCTRL_OFFSET 0x0078 #define OMAP4430_CM_L3INIT_P1500_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0078) +#define OMAP4_CM_L3INIT_EMAC_CLKCTRL_OFFSET 0x0080 #define OMAP4430_CM_L3INIT_EMAC_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0080) +#define OMAP4_CM_L3INIT_SATA_CLKCTRL_OFFSET 0x0088 #define OMAP4430_CM_L3INIT_SATA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0088) +#define OMAP4_CM_L3INIT_TPPSS_CLKCTRL_OFFSET 0x0090 #define OMAP4430_CM_L3INIT_TPPSS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0090) +#define OMAP4_CM_L3INIT_PCIESS_CLKCTRL_OFFSET 0x0098 #define OMAP4430_CM_L3INIT_PCIESS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0098) +#define OMAP4_CM_L3INIT_CCPTX_CLKCTRL_OFFSET 0x00a8 #define OMAP4430_CM_L3INIT_CCPTX_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00a8) +#define OMAP4_CM_L3INIT_XHPI_CLKCTRL_OFFSET 0x00c0 #define OMAP4430_CM_L3INIT_XHPI_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00c0) +#define OMAP4_CM_L3INIT_MMC6_CLKCTRL_OFFSET 0x00c8 #define OMAP4430_CM_L3INIT_MMC6_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00c8) +#define OMAP4_CM_L3INIT_USB_HOST_FS_CLKCTRL_OFFSET 0x00d0 #define OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00d0) +#define OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET 0x00e0 #define OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00e0) /* CM2.L4PER_CM2 register offsets */ +#define OMAP4_CM_L4PER_CLKSTCTRL_OFFSET 0x0000 #define OMAP4430_CM_L4PER_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0000) +#define OMAP4_CM_L4PER_DYNAMICDEP_OFFSET 0x0008 #define OMAP4430_CM_L4PER_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0008) +#define OMAP4_CM_L4PER_ADC_CLKCTRL_OFFSET 0x0020 #define OMAP4430_CM_L4PER_ADC_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0020) +#define OMAP4_CM_L4PER_DMTIMER10_CLKCTRL_OFFSET 0x0028 #define OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0028) +#define OMAP4_CM_L4PER_DMTIMER11_CLKCTRL_OFFSET 0x0030 #define OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0030) +#define OMAP4_CM_L4PER_DMTIMER2_CLKCTRL_OFFSET 0x0038 #define OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0038) +#define OMAP4_CM_L4PER_DMTIMER3_CLKCTRL_OFFSET 0x0040 #define OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0040) +#define OMAP4_CM_L4PER_DMTIMER4_CLKCTRL_OFFSET 0x0048 #define OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0048) +#define OMAP4_CM_L4PER_DMTIMER9_CLKCTRL_OFFSET 0x0050 #define OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0050) +#define OMAP4_CM_L4PER_ELM_CLKCTRL_OFFSET 0x0058 #define OMAP4430_CM_L4PER_ELM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0058) +#define OMAP4_CM_L4PER_GPIO2_CLKCTRL_OFFSET 0x0060 #define OMAP4430_CM_L4PER_GPIO2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0060) +#define OMAP4_CM_L4PER_GPIO3_CLKCTRL_OFFSET 0x0068 #define OMAP4430_CM_L4PER_GPIO3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0068) +#define OMAP4_CM_L4PER_GPIO4_CLKCTRL_OFFSET 0x0070 #define OMAP4430_CM_L4PER_GPIO4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0070) +#define OMAP4_CM_L4PER_GPIO5_CLKCTRL_OFFSET 0x0078 #define OMAP4430_CM_L4PER_GPIO5_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0078) +#define OMAP4_CM_L4PER_GPIO6_CLKCTRL_OFFSET 0x0080 #define OMAP4430_CM_L4PER_GPIO6_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0080) +#define OMAP4_CM_L4PER_HDQ1W_CLKCTRL_OFFSET 0x0088 #define OMAP4430_CM_L4PER_HDQ1W_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0088) +#define OMAP4_CM_L4PER_HECC1_CLKCTRL_OFFSET 0x0090 #define OMAP4430_CM_L4PER_HECC1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0090) +#define OMAP4_CM_L4PER_HECC2_CLKCTRL_OFFSET 0x0098 #define OMAP4430_CM_L4PER_HECC2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0098) +#define OMAP4_CM_L4PER_I2C1_CLKCTRL_OFFSET 0x00a0 #define OMAP4430_CM_L4PER_I2C1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00a0) +#define OMAP4_CM_L4PER_I2C2_CLKCTRL_OFFSET 0x00a8 #define OMAP4430_CM_L4PER_I2C2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00a8) +#define OMAP4_CM_L4PER_I2C3_CLKCTRL_OFFSET 0x00b0 #define OMAP4430_CM_L4PER_I2C3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00b0) +#define OMAP4_CM_L4PER_I2C4_CLKCTRL_OFFSET 0x00b8 #define OMAP4430_CM_L4PER_I2C4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00b8) +#define OMAP4_CM_L4PER_L4PER_CLKCTRL_OFFSET 0x00c0 #define OMAP4430_CM_L4PER_L4PER_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00c0) +#define OMAP4_CM_L4PER_MCASP2_CLKCTRL_OFFSET 0x00d0 #define OMAP4430_CM_L4PER_MCASP2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00d0) +#define OMAP4_CM_L4PER_MCASP3_CLKCTRL_OFFSET 0x00d8 #define OMAP4430_CM_L4PER_MCASP3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00d8) +#define OMAP4_CM_L4PER_MCBSP4_CLKCTRL_OFFSET 0x00e0 #define OMAP4430_CM_L4PER_MCBSP4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00e0) +#define OMAP4_CM_L4PER_MGATE_CLKCTRL_OFFSET 0x00e8 #define OMAP4430_CM_L4PER_MGATE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00e8) +#define OMAP4_CM_L4PER_MCSPI1_CLKCTRL_OFFSET 0x00f0 #define OMAP4430_CM_L4PER_MCSPI1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00f0) +#define OMAP4_CM_L4PER_MCSPI2_CLKCTRL_OFFSET 0x00f8 #define OMAP4430_CM_L4PER_MCSPI2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00f8) +#define OMAP4_CM_L4PER_MCSPI3_CLKCTRL_OFFSET 0x0100 #define OMAP4430_CM_L4PER_MCSPI3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0100) +#define OMAP4_CM_L4PER_MCSPI4_CLKCTRL_OFFSET 0x0108 #define OMAP4430_CM_L4PER_MCSPI4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0108) +#define OMAP4_CM_L4PER_MMCSD3_CLKCTRL_OFFSET 0x0120 #define OMAP4430_CM_L4PER_MMCSD3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0120) +#define OMAP4_CM_L4PER_MMCSD4_CLKCTRL_OFFSET 0x0128 #define OMAP4430_CM_L4PER_MMCSD4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0128) +#define OMAP4_CM_L4PER_MSPROHG_CLKCTRL_OFFSET 0x0130 #define OMAP4430_CM_L4PER_MSPROHG_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0130) +#define OMAP4_CM_L4PER_SLIMBUS2_CLKCTRL_OFFSET 0x0138 #define OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0138) +#define OMAP4_CM_L4PER_UART1_CLKCTRL_OFFSET 0x0140 #define OMAP4430_CM_L4PER_UART1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0140) +#define OMAP4_CM_L4PER_UART2_CLKCTRL_OFFSET 0x0148 #define OMAP4430_CM_L4PER_UART2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0148) +#define OMAP4_CM_L4PER_UART3_CLKCTRL_OFFSET 0x0150 #define OMAP4430_CM_L4PER_UART3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0150) +#define OMAP4_CM_L4PER_UART4_CLKCTRL_OFFSET 0x0158 #define OMAP4430_CM_L4PER_UART4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0158) +#define OMAP4_CM_L4PER_MMCSD5_CLKCTRL_OFFSET 0x0160 #define OMAP4430_CM_L4PER_MMCSD5_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0160) +#define OMAP4_CM_L4PER_I2C5_CLKCTRL_OFFSET 0x0168 #define OMAP4430_CM_L4PER_I2C5_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0168) +#define OMAP4_CM_L4SEC_CLKSTCTRL_OFFSET 0x0180 #define OMAP4430_CM_L4SEC_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0180) +#define OMAP4_CM_L4SEC_STATICDEP_OFFSET 0x0184 #define OMAP4430_CM_L4SEC_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0184) +#define OMAP4_CM_L4SEC_DYNAMICDEP_OFFSET 0x0188 #define OMAP4430_CM_L4SEC_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0188) +#define OMAP4_CM_L4SEC_AES1_CLKCTRL_OFFSET 0x01a0 #define OMAP4430_CM_L4SEC_AES1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01a0) +#define OMAP4_CM_L4SEC_AES2_CLKCTRL_OFFSET 0x01a8 #define OMAP4430_CM_L4SEC_AES2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01a8) +#define OMAP4_CM_L4SEC_DES3DES_CLKCTRL_OFFSET 0x01b0 #define OMAP4430_CM_L4SEC_DES3DES_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01b0) +#define OMAP4_CM_L4SEC_PKAEIP29_CLKCTRL_OFFSET 0x01b8 #define OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01b8) +#define OMAP4_CM_L4SEC_RNG_CLKCTRL_OFFSET 0x01c0 #define OMAP4430_CM_L4SEC_RNG_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01c0) +#define OMAP4_CM_L4SEC_SHA2MD51_CLKCTRL_OFFSET 0x01c8 #define OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01c8) +#define OMAP4_CM_L4SEC_CRYPTODMA_CLKCTRL_OFFSET 0x01d8 #define OMAP4430_CM_L4SEC_CRYPTODMA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01d8) /* CM2.CEFUSE_CM2 register offsets */ +#define OMAP4_CM_CEFUSE_CLKSTCTRL_OFFSET 0x0000 #define OMAP4430_CM_CEFUSE_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0000) +#define OMAP4_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET 0x0020 #define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0020) - -/* CM2.RESTORE_CM2 register offsets */ -#define OMAP4430_CM_L3_1_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0000) -#define OMAP4430_CM_L3_2_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0004) -#define OMAP4430_CM_L4CFG_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0008) -#define OMAP4430_CM_MEMIF_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x000c) -#define OMAP4430_CM_L4PER_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0010) -#define OMAP4430_CM_L3INIT_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0014) -#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0018) -#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x001c) -#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0020) -#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0024) -#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0028) -#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x002c) -#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0030) -#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0034) -#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0038) -#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x003c) -#define OMAP4430_CM_SDMA_STATICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0040) #endif diff --git a/arch/arm/mach-omap2/cm4xxx.c b/arch/arm/mach-omap2/cm4xxx.c index 4af76bb1003a..b101091e95d6 100644 --- a/arch/arm/mach-omap2/cm4xxx.c +++ b/arch/arm/mach-omap2/cm4xxx.c @@ -21,35 +21,41 @@ #include <asm/atomic.h> -#include "cm.h" - -/* XXX move this to cm.h */ -/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */ -#define MAX_MODULE_READY_TIME 20000 +#include <plat/common.h> -/* - * OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK: isolates the IDLEST field in the - * CM_CLKCTRL register. - */ -#define OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK (0x2 << 16) - -/* - * OMAP4 prcm_mod u32 fields contain packed data: the CM ID in bit 16 and - * the PRCM module offset address (from the CM module base) in bits 15-0. - */ -#define OMAP4_PRCM_MOD_CM_ID_SHIFT 16 -#define OMAP4_PRCM_MOD_OFFS_MASK 0xffff +#include "cm.h" +#include "cm-regbits-44xx.h" /** - * omap4_cm_wait_idlest_ready - wait for a module to leave idle or standby - * @prcm_mod: PRCM module offset (XXX example) - * @prcm_dev_offs: PRCM device offset (e.g. MCASP XXX example) + * omap4_cm_wait_module_ready - wait for a module to be in 'func' state + * @clkctrl_reg: CLKCTRL module address + * + * Wait for the module IDLEST to be functional. If the idle state is in any + * the non functional state (trans, idle or disabled), module and thus the + * sysconfig cannot be accessed and will probably lead to an "imprecise + * external abort" + * + * Module idle state: + * 0x0 func: Module is fully functional, including OCP + * 0x1 trans: Module is performing transition: wakeup, or sleep, or sleep + * abortion + * 0x2 idle: Module is in Idle mode (only OCP part). It is functional if + * using separate functional clock + * 0x3 disabled: Module is disabled and cannot be accessed * - * XXX document + * TODO: Need to handle module accessible in idle state */ -int omap4_cm_wait_idlest_ready(u32 prcm_mod, u8 prcm_dev_offs) +int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg) { - /* FIXME: Add clock manager related code */ - return 0; + int i = 0; + + if (!clkctrl_reg) + return 0; + + omap_test_timeout(((__raw_readl(clkctrl_reg) & + OMAP4430_IDLEST_MASK) == 0), + MAX_MODULE_READY_TIME, i); + + return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; } diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 43f8a33655d4..a8d20eef2306 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -194,11 +194,12 @@ void omap3_clear_scratchpad_contents(void) u32 offset = 0; v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM); if (prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) & - OMAP3430_GLOBAL_COLD_RST) { + OMAP3430_GLOBAL_COLD_RST_MASK) { for ( ; offset <= max_offset; offset += 0x4) __raw_writel(0x0, (v_addr + offset)); - prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST, OMAP3430_GR_MOD, - OMAP3_PRM_RSTST_OFFSET); + prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK, + OMAP3430_GR_MOD, + OMAP3_PRM_RSTST_OFFSET); } } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 12154d10e536..03e6c9ed82a4 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -28,6 +28,7 @@ #include <plat/mux.h> #include <mach/gpio.h> #include <plat/mmc.h> +#include <plat/dma.h> #include "mux.h" @@ -486,8 +487,10 @@ static void omap_init_pmu(void) } -#ifdef CONFIG_OMAP_SHA1_MD5 -static struct resource sha1_md5_resources[] = { +#if defined(CONFIG_CRYPTO_DEV_OMAP_SHAM) || defined(CONFIG_CRYPTO_DEV_OMAP_SHAM_MODULE) + +#ifdef CONFIG_ARCH_OMAP2 +static struct resource omap2_sham_resources[] = { { .start = OMAP24XX_SEC_SHA1MD5_BASE, .end = OMAP24XX_SEC_SHA1MD5_BASE + 0x64, @@ -498,20 +501,55 @@ static struct resource sha1_md5_resources[] = { .flags = IORESOURCE_IRQ, } }; +static int omap2_sham_resources_sz = ARRAY_SIZE(omap2_sham_resources); +#else +#define omap2_sham_resources NULL +#define omap2_sham_resources_sz 0 +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static struct resource omap3_sham_resources[] = { + { + .start = OMAP34XX_SEC_SHA1MD5_BASE, + .end = OMAP34XX_SEC_SHA1MD5_BASE + 0x64, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_34XX_SHA1MD52_IRQ, + .flags = IORESOURCE_IRQ, + }, + { + .start = OMAP34XX_DMA_SHA1MD5_RX, + .flags = IORESOURCE_DMA, + } +}; +static int omap3_sham_resources_sz = ARRAY_SIZE(omap3_sham_resources); +#else +#define omap3_sham_resources NULL +#define omap3_sham_resources_sz 0 +#endif -static struct platform_device sha1_md5_device = { - .name = "OMAP SHA1/MD5", +static struct platform_device sham_device = { + .name = "omap-sham", .id = -1, - .num_resources = ARRAY_SIZE(sha1_md5_resources), - .resource = sha1_md5_resources, }; -static void omap_init_sha1_md5(void) +static void omap_init_sham(void) { - platform_device_register(&sha1_md5_device); + if (cpu_is_omap24xx()) { + sham_device.resource = omap2_sham_resources; + sham_device.num_resources = omap2_sham_resources_sz; + } else if (cpu_is_omap34xx()) { + sham_device.resource = omap3_sham_resources; + sham_device.num_resources = omap3_sham_resources_sz; + } else { + pr_err("%s: platform not supported\n", __func__); + return; + } + platform_device_register(&sham_device); } #else -static inline void omap_init_sha1_md5(void) { } +static inline void omap_init_sham(void) { } #endif /*-------------------------------------------------------------------------*/ @@ -624,6 +662,15 @@ static inline void omap_hsmmc_reset(void) {} static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, int controller_nr) { + if ((mmc_controller->slots[0].switch_pin > 0) && \ + (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) + omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, + OMAP_PIN_INPUT_PULLUP); + if ((mmc_controller->slots[0].gpio_wp > 0) && \ + (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) + omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, + OMAP_PIN_INPUT_PULLUP); + if (cpu_is_omap2420() && controller_nr == 0) { omap_cfg_reg(H18_24XX_MMC_CMD); omap_cfg_reg(H15_24XX_MMC_CLKI); @@ -819,6 +866,33 @@ static inline void omap_hdq_init(void) static inline void omap_hdq_init(void) {} #endif +/*---------------------------------------------------------------------------*/ + +#if defined(CONFIG_VIDEO_OMAP2_VOUT) || \ + defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE) +#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) +static struct resource omap_vout_resource[3 - CONFIG_FB_OMAP2_NUM_FBS] = { +}; +#else +static struct resource omap_vout_resource[2] = { +}; +#endif + +static struct platform_device omap_vout_device = { + .name = "omap_vout", + .num_resources = ARRAY_SIZE(omap_vout_resource), + .resource = &omap_vout_resource[0], + .id = -1, +}; +static void omap_init_vout(void) +{ + if (platform_device_register(&omap_vout_device) < 0) + printk(KERN_ERR "Unable to register OMAP-VOUT device\n"); +} +#else +static inline void omap_init_vout(void) {} +#endif + /*-------------------------------------------------------------------------*/ static int __init omap2_init_devices(void) @@ -833,7 +907,8 @@ static int __init omap2_init_devices(void) omap_init_pmu(); omap_hdq_init(); omap_init_sti(); - omap_init_sha1_md5(); + omap_init_sham(); + omap_init_vout(); return 0; } diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 9ad229594b46..1ef54b036103 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -24,6 +24,7 @@ static u16 control_pbias_offset; static u16 control_devconf1_offset; +static u16 control_mmc1; #define HSMMC_NAME_LEN 9 @@ -42,7 +43,7 @@ static int hsmmc_get_context_loss(struct device *dev) #define hsmmc_get_context_loss NULL #endif -static void hsmmc1_before_set_reg(struct device *dev, int slot, +static void omap_hsmmc1_before_set_reg(struct device *dev, int slot, int power_on, int vdd) { u32 reg, prog_io; @@ -95,7 +96,7 @@ static void hsmmc1_before_set_reg(struct device *dev, int slot, } } -static void hsmmc1_after_set_reg(struct device *dev, int slot, +static void omap_hsmmc1_after_set_reg(struct device *dev, int slot, int power_on, int vdd) { u32 reg; @@ -119,6 +120,60 @@ static void hsmmc1_after_set_reg(struct device *dev, int slot, } } +static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot, + int power_on, int vdd) +{ + u32 reg; + + /* + * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the + * card with Vcc regulator (from twl4030 or whatever). OMAP has both + * 1.8V and 3.0V modes, controlled by the PBIAS register. + * + * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which + * is most naturally TWL VSIM; those pins also use PBIAS. + * + * FIXME handle VMMC1A as needed ... + */ + reg = omap_ctrl_readl(control_pbias_offset); + reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ | OMAP4_MMC1_PWRDNZ | + OMAP4_USBC1_ICUSB_PWRDNZ); + omap_ctrl_writel(reg, control_pbias_offset); +} + +static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, + int power_on, int vdd) +{ + u32 reg; + + if (power_on) { + reg = omap_ctrl_readl(control_pbias_offset); + reg |= OMAP4_MMC1_PBIASLITE_PWRDNZ; + if ((1 << vdd) <= MMC_VDD_165_195) + reg &= ~OMAP4_MMC1_PBIASLITE_VMODE; + else + reg |= OMAP4_MMC1_PBIASLITE_VMODE; + reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ | OMAP4_MMC1_PWRDNZ | + OMAP4_USBC1_ICUSB_PWRDNZ); + omap_ctrl_writel(reg, control_pbias_offset); + /* 4 microsec delay for comparator to generate an error*/ + udelay(4); + reg = omap_ctrl_readl(control_pbias_offset); + if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR) { + pr_err("Pbias Voltage is not same as LDO\n"); + /* Caution : On VMODE_ERROR Power Down MMC IO */ + reg &= ~(OMAP4_MMC1_PWRDNZ | OMAP4_USBC1_ICUSB_PWRDNZ); + omap_ctrl_writel(reg, control_pbias_offset); + } + } else { + reg = omap_ctrl_readl(control_pbias_offset); + reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ | + OMAP4_MMC1_PBIASLITE_VMODE | OMAP4_MMC1_PWRDNZ | + OMAP4_USBC1_ICUSB_PWRDNZ); + omap_ctrl_writel(reg, control_pbias_offset); + } +} + static void hsmmc23_before_set_reg(struct device *dev, int slot, int power_on, int vdd) { @@ -139,6 +194,12 @@ static void hsmmc23_before_set_reg(struct device *dev, int slot, } } +static int nop_mmc_set_power(struct device *dev, int slot, int power_on, + int vdd) +{ + return 0; +} + static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata; void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) @@ -146,13 +207,28 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) struct omap2_hsmmc_info *c; int nr_hsmmc = ARRAY_SIZE(hsmmc_data); int i; + u32 reg; - if (cpu_is_omap2430()) { - control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; - control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1; + if (!cpu_is_omap44xx()) { + if (cpu_is_omap2430()) { + control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; + control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1; + } else { + control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE; + control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1; + } } else { - control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE; - control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1; + control_pbias_offset = OMAP44XX_CONTROL_PBIAS_LITE; + control_mmc1 = OMAP44XX_CONTROL_MMC1; + reg = omap_ctrl_readl(control_mmc1); + reg |= (OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP0 | + OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP1); + reg &= ~(OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP2 | + OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP3); + reg |= (OMAP4_CONTROL_SDMMC1_DR0_SPEEDCTRL | + OMAP4_CONTROL_SDMMC1_DR1_SPEEDCTRL | + OMAP4_CONTROL_SDMMC1_DR2_SPEEDCTRL); + omap_ctrl_writel(reg, control_mmc1); } for (c = controllers; c->mmc; c++) { @@ -216,11 +292,27 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) */ mmc->slots[0].ocr_mask = c->ocr_mask; + if (cpu_is_omap3517() || cpu_is_omap3505()) + mmc->slots[0].set_power = nop_mmc_set_power; + else + mmc->slots[0].features |= HSMMC_HAS_PBIAS; + switch (c->mmc) { case 1: - /* on-chip level shifting via PBIAS0/PBIAS1 */ - mmc->slots[0].before_set_reg = hsmmc1_before_set_reg; - mmc->slots[0].after_set_reg = hsmmc1_after_set_reg; + if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { + /* on-chip level shifting via PBIAS0/PBIAS1 */ + if (cpu_is_omap44xx()) { + mmc->slots[0].before_set_reg = + omap4_hsmmc1_before_set_reg; + mmc->slots[0].after_set_reg = + omap4_hsmmc1_after_set_reg; + } else { + mmc->slots[0].before_set_reg = + omap_hsmmc1_before_set_reg; + mmc->slots[0].after_set_reg = + omap_hsmmc1_after_set_reg; + } + } /* Omap3630 HSMMC1 supports only 4-bit */ if (cpu_is_omap3630() && c->wires > 4) { @@ -235,9 +327,11 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) c->wires = 4; /* FALLTHROUGH */ case 3: - /* off-chip level shifting, or none */ - mmc->slots[0].before_set_reg = hsmmc23_before_set_reg; - mmc->slots[0].after_set_reg = NULL; + if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { + /* off-chip level shifting, or none */ + mmc->slots[0].before_set_reg = hsmmc23_before_set_reg; + mmc->slots[0].after_set_reg = NULL; + } break; default: pr_err("MMC%d configuration not supported!\n", c->mmc); diff --git a/arch/arm/mach-omap2/include/mach/am35xx.h b/arch/arm/mach-omap2/include/mach/am35xx.h index a705f946fc46..f1e13d1ca5e7 100644 --- a/arch/arm/mach-omap2/include/mach/am35xx.h +++ b/arch/arm/mach-omap2/include/mach/am35xx.h @@ -23,4 +23,22 @@ #define AM35XX_IPSS_HECC_BASE 0x5C050000 #define AM35XX_IPSS_VPFE_BASE 0x5C060000 -#endif /* __ASM_ARCH_AM35XX_H */ + +/* HECC module specifc offset definitions */ +#define AM35XX_HECC_SCC_HECC_OFFSET (0x0) +#define AM35XX_HECC_SCC_RAM_OFFSET (0x3000) +#define AM35XX_HECC_RAM_OFFSET (0x3000) +#define AM35XX_HECC_MBOX_OFFSET (0x2000) +#define AM35XX_HECC_INT_LINE (0x0) +#define AM35XX_HECC_VERSION (0x1) + +#define AM35XX_EMAC_CNTRL_OFFSET (0x10000) +#define AM35XX_EMAC_CNTRL_MOD_OFFSET (0x0) +#define AM35XX_EMAC_CNTRL_RAM_OFFSET (0x20000) +#define AM35XX_EMAC_MDIO_OFFSET (0x30000) +#define AM35XX_EMAC_CNTRL_RAM_SIZE (0x2000) +#define AM35XX_EMAC_RAM_ADDR (AM3517_EMAC_BASE + \ + AM3517_EMAC_CNTRL_RAM_OFFSET) +#define AM35XX_EMAC_HW_RAM_ADDR (0x01E20000) + +#endif /* __ASM_ARCH_AM35XX_H */ diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 4a63a2ea484d..35b24409a0c8 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -13,6 +13,8 @@ #include <linux/serial_reg.h> +#include <asm/memory.h> + #include <plat/serial.h> #define UART_OFFSET(addr) ((addr) & 0x00ffffff) @@ -40,13 +42,12 @@ omap_uart_lsr: .word 0 cmp \rx, #0 @ is port configured? bne 99f @ already configured - /* Check UART1 scratchpad register for uart to use */ + /* Check the debug UART configuration set in uncompress.h */ mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? - moveq \rx, #0x48000000 @ physical base address - movne \rx, #0xfa000000 @ virtual base - orr \rx, \rx, #0x0006a000 @ uart1 on omap2/3/4 - ldrb \rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)] @ scratchpad + ldreq \rx, =OMAP_UART_INFO + ldrne \rx, =__phys_to_virt(OMAP_UART_INFO) + ldr \rx, [\rx, #0] /* Select the UART to use based on the UART1 scratchpad value */ cmp \rx, #0 @ no port configured? @@ -87,10 +88,10 @@ omap_uart_lsr: .word 0 b 98f 44: mov \rx, #UART_OFFSET(OMAP4_UART4_BASE) b 98f -95: mov \rx, #ZOOM_UART_BASE +95: ldr \rx, =ZOOM_UART_BASE ldr \tmp, =omap_uart_phys str \rx, [\tmp, #0] - mov \rx, #ZOOM_UART_VIRT + ldr \rx, =ZOOM_UART_VIRT ldr \tmp, =omap_uart_virt str \rx, [\tmp, #0] mov \rx, #(UART_LSR << ZOOM_PORT_SHIFT) diff --git a/arch/arm/mach-omap2/include/mach/omap4-common.h b/arch/arm/mach-omap2/include/mach/omap4-common.h new file mode 100644 index 000000000000..423af3a6dd31 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/omap4-common.h @@ -0,0 +1,26 @@ +/* + * omap4-common.h: OMAP4 specific common header file + * + * Copyright (C) 2010 Texas Instruments, Inc. + * + * Author: + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef OMAP_ARCH_OMAP4_COMMON_H +#define OMAP_ARCH_OMAP4_COMMON_H + +#ifdef CONFIG_CACHE_L2X0 +extern void __iomem *l2cache_base; +#endif + +extern void __iomem *gic_cpu_base_addr; +extern void __iomem *gic_dist_base_addr; + +extern void __init gic_init_irq(void); +extern void omap_smc1(u32 fn, u32 arg); + +#endif diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 87f676acf61d..3cfb425ea67e 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -166,6 +166,15 @@ static struct map_desc omap34xx_io_desc[] __initdata = { .length = L4_EMU_34XX_SIZE, .type = MT_DEVICE }, +#if defined(CONFIG_DEBUG_LL) && \ + (defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3)) + { + .virtual = ZOOM_UART_VIRT, + .pfn = __phys_to_pfn(ZOOM_UART_BASE), + .length = SZ_1M, + .type = MT_DEVICE + }, +#endif }; #endif #ifdef CONFIG_ARCH_OMAP4 diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c index 4f63dc6859a4..e82da680d908 100644 --- a/arch/arm/mach-omap2/iommu2.c +++ b/arch/arm/mach-omap2/iommu2.c @@ -147,6 +147,7 @@ static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra) printk("\n"); iommu_write_reg(obj, stat, MMU_IRQSTATUS); + omap2_iommu_disable(obj); return stat; } @@ -184,7 +185,7 @@ static struct cr_regs *omap2_alloc_cr(struct iommu *obj, struct iotlb_entry *e) if (!cr) return ERR_PTR(-ENOMEM); - cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz; + cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz | e->valid; cr->ram = e->pa | e->endian | e->elsz | e->mixed; return cr; @@ -212,7 +213,8 @@ static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf) char *p = buf; /* FIXME: Need more detail analysis of cam/ram */ - p += sprintf(p, "%08x %08x\n", cr->cam, cr->ram); + p += sprintf(p, "%08x %08x %01x\n", cr->cam, cr->ram, + (cr->cam & MMU_CAM_P) ? 1 : 0); return p - buf; } diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index 07aa7b3c95f7..2ff4dce95ee8 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -1901,26 +1901,15 @@ struct omap_ball __initdata omap36xx_cbp_ball[] = { _OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"), _OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"), _OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"), - _OMAP3_BALLENTRY(GPMC_D0, "k1", "m2"), - _OMAP3_BALLENTRY(GPMC_D1, "l1", "m1"), _OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"), _OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"), _OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"), _OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"), _OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"), _OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"), - _OMAP3_BALLENTRY(GPMC_D2, "l2", "n2"), - _OMAP3_BALLENTRY(GPMC_D3, "p2", "n1"), - _OMAP3_BALLENTRY(GPMC_D4, "t1", "r2"), - _OMAP3_BALLENTRY(GPMC_D5, "v1", "r1"), - _OMAP3_BALLENTRY(GPMC_D6, "v2", "t2"), - _OMAP3_BALLENTRY(GPMC_D7, "w2", "t1"), - _OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"), _OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"), - _OMAP3_BALLENTRY(GPMC_NADV_ALE, "f3", "w1"), _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"), _OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL), - _OMAP3_BALLENTRY(GPMC_NCS0, "g4", "y2"), _OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"), _OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL), _OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL), @@ -1928,10 +1917,7 @@ struct omap_ball __initdata omap36xx_cbp_ball[] = { _OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL), _OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL), _OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL), - _OMAP3_BALLENTRY(GPMC_NOE, "g2", "v2"), - _OMAP3_BALLENTRY(GPMC_NWE, "f4", "v1"), _OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"), - _OMAP3_BALLENTRY(GPMC_WAIT0, "m8", "ab12"), _OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"), _OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL), _OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL), @@ -1948,8 +1934,6 @@ struct omap_ball __initdata omap36xx_cbp_ball[] = { _OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL), _OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL), _OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL), - _OMAP3_BALLENTRY(I2C1_SCL, "k21", NULL), - _OMAP3_BALLENTRY(I2C1_SDA, "j21", NULL), _OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL), _OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL), _OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL), @@ -1958,11 +1942,6 @@ struct omap_ball __initdata omap36xx_cbp_ball[] = { _OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL), _OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL), _OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL), - _OMAP3_BALLENTRY(JTAG_RTCK, "aa12", NULL), - _OMAP3_BALLENTRY(JTAG_TCK, "aa13", NULL), - _OMAP3_BALLENTRY(JTAG_TDI, "aa20", NULL), - _OMAP3_BALLENTRY(JTAG_TDO, "aa19", NULL), - _OMAP3_BALLENTRY(JTAG_TMS_TMSC, "aa18", NULL), _OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL), _OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL), _OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL), @@ -2010,77 +1989,12 @@ struct omap_ball __initdata omap36xx_cbp_ball[] = { _OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL), _OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL), _OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL), - _OMAP3_BALLENTRY(SDRC_A0, NULL, "n22"), - _OMAP3_BALLENTRY(SDRC_A1, NULL, "n23"), - _OMAP3_BALLENTRY(SDRC_A10, NULL, "v22"), - _OMAP3_BALLENTRY(SDRC_A11, NULL, "v23"), - _OMAP3_BALLENTRY(SDRC_A12, NULL, "w22"), - _OMAP3_BALLENTRY(SDRC_A13, NULL, "w23"), - _OMAP3_BALLENTRY(SDRC_A14, NULL, "y22"), - _OMAP3_BALLENTRY(SDRC_A2, NULL, "p22"), - _OMAP3_BALLENTRY(SDRC_A3, NULL, "p23"), - _OMAP3_BALLENTRY(SDRC_A4, NULL, "r22"), - _OMAP3_BALLENTRY(SDRC_A5, NULL, "r23"), - _OMAP3_BALLENTRY(SDRC_A6, NULL, "t22"), - _OMAP3_BALLENTRY(SDRC_A7, NULL, "t23"), - _OMAP3_BALLENTRY(SDRC_A8, NULL, "u22"), - _OMAP3_BALLENTRY(SDRC_A9, NULL, "u23"), - _OMAP3_BALLENTRY(SDRC_BA0, "h9", "ab21"), - _OMAP3_BALLENTRY(SDRC_BA1, "h10", "ac21"), _OMAP3_BALLENTRY(SDRC_CKE0, "h16", "j22"), _OMAP3_BALLENTRY(SDRC_CKE1, "h17", "j23"), - _OMAP3_BALLENTRY(SDRC_CLK, "a13", "a11"), - _OMAP3_BALLENTRY(SDRC_D0, NULL, "j2"), - _OMAP3_BALLENTRY(SDRC_D1, NULL, "j1"), - _OMAP3_BALLENTRY(SDRC_D10, "c15", "b14"), - _OMAP3_BALLENTRY(SDRC_D11, "b16", "a14"), - _OMAP3_BALLENTRY(SDRC_D12, "d17", "b16"), - _OMAP3_BALLENTRY(SDRC_D13, "c17", "a16"), - _OMAP3_BALLENTRY(SDRC_D14, "b17", "b19"), - _OMAP3_BALLENTRY(SDRC_D15, "d18", "a19"), - _OMAP3_BALLENTRY(SDRC_D16, NULL, "b3"), - _OMAP3_BALLENTRY(SDRC_D17, NULL, "a3"), - _OMAP3_BALLENTRY(SDRC_D18, NULL, "b5"), - _OMAP3_BALLENTRY(SDRC_D19, NULL, "a5"), - _OMAP3_BALLENTRY(SDRC_D2, NULL, "g2"), - _OMAP3_BALLENTRY(SDRC_D20, NULL, "b8"), - _OMAP3_BALLENTRY(SDRC_D21, NULL, "a8"), - _OMAP3_BALLENTRY(SDRC_D22, NULL, "b9"), - _OMAP3_BALLENTRY(SDRC_D23, NULL, "a9"), - _OMAP3_BALLENTRY(SDRC_D24, NULL, "b21"), - _OMAP3_BALLENTRY(SDRC_D25, NULL, "a21"), - _OMAP3_BALLENTRY(SDRC_D26, NULL, "d22"), - _OMAP3_BALLENTRY(SDRC_D27, NULL, "d23"), - _OMAP3_BALLENTRY(SDRC_D28, NULL, "e22"), - _OMAP3_BALLENTRY(SDRC_D29, NULL, "e23"), - _OMAP3_BALLENTRY(SDRC_D3, NULL, "g1"), - _OMAP3_BALLENTRY(SDRC_D30, NULL, "g22"), - _OMAP3_BALLENTRY(SDRC_D31, NULL, "g23"), - _OMAP3_BALLENTRY(SDRC_D4, NULL, "f2"), - _OMAP3_BALLENTRY(SDRC_D5, NULL, "f1"), - _OMAP3_BALLENTRY(SDRC_D6, NULL, "d2"), - _OMAP3_BALLENTRY(SDRC_D7, NULL, "d1"), - _OMAP3_BALLENTRY(SDRC_D8, "c14", "b13"), - _OMAP3_BALLENTRY(SDRC_D9, "b14", "a13"), - _OMAP3_BALLENTRY(SDRC_DM0, NULL, "c1"), - _OMAP3_BALLENTRY(SDRC_DM1, "a16", "a17"), - _OMAP3_BALLENTRY(SDRC_DM2, NULL, "a6"), - _OMAP3_BALLENTRY(SDRC_DM3, NULL, "a20"), - _OMAP3_BALLENTRY(SDRC_DQS0, NULL, "c2"), - _OMAP3_BALLENTRY(SDRC_DQS1, "a17", "b17"), - _OMAP3_BALLENTRY(SDRC_DQS2, NULL, "b6"), - _OMAP3_BALLENTRY(SDRC_DQS3, NULL, "b20"), - _OMAP3_BALLENTRY(SDRC_NCAS, "h13", "l22"), - _OMAP3_BALLENTRY(SDRC_NCLK, "a14", "b11"), - _OMAP3_BALLENTRY(SDRC_NCS0, "h11", "m22"), - _OMAP3_BALLENTRY(SDRC_NCS1, "h12", "m23"), - _OMAP3_BALLENTRY(SDRC_NRAS, "h14", "l23"), - _OMAP3_BALLENTRY(SDRC_NWE, "h15", "k23"), _OMAP3_BALLENTRY(SIM_CLK, "p26", NULL), _OMAP3_BALLENTRY(SIM_IO, "p27", NULL), _OMAP3_BALLENTRY(SIM_PWRCTRL, "r27", NULL), _OMAP3_BALLENTRY(SIM_RST, "r25", NULL), - _OMAP3_BALLENTRY(SYS_32K, "ae25", NULL), _OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL), _OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL), _OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL), diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c new file mode 100644 index 000000000000..eb9bee73e0cb --- /dev/null +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -0,0 +1,157 @@ +/* + * omap iommu: omap device registration + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> + +#include <plat/iommu.h> +#include <plat/irqs.h> + +struct iommu_device { + resource_size_t base; + int irq; + struct iommu_platform_data pdata; + struct resource res[2]; +}; +static struct iommu_device *devices; +static int num_iommu_devices; + +#ifdef CONFIG_ARCH_OMAP3 +static struct iommu_device omap3_devices[] = { + { + .base = 0x480bd400, + .irq = 24, + .pdata = { + .name = "isp", + .nr_tlb_entries = 8, + .clk_name = "cam_ick", + }, + }, +#if defined(CONFIG_MPU_BRIDGE_IOMMU) + { + .base = 0x5d000000, + .irq = 28, + .pdata = { + .name = "iva2", + .nr_tlb_entries = 32, + .clk_name = "iva2_ck", + }, + }, +#endif +}; +#define NR_OMAP3_IOMMU_DEVICES ARRAY_SIZE(omap3_devices) +static struct platform_device *omap3_iommu_pdev[NR_OMAP3_IOMMU_DEVICES]; +#else +#define omap3_devices NULL +#define NR_OMAP3_IOMMU_DEVICES 0 +#define omap3_iommu_pdev NULL +#endif + +#ifdef CONFIG_ARCH_OMAP4 +static struct iommu_device omap4_devices[] = { + { + .base = OMAP4_MMU1_BASE, + .irq = INT_44XX_DUCATI_MMU_IRQ, + .pdata = { + .name = "ducati", + .nr_tlb_entries = 32, + .clk_name = "ducati_ick", + }, + }, +#if defined(CONFIG_MPU_TESLA_IOMMU) + { + .base = OMAP4_MMU2_BASE, + .irq = INT_44XX_DSP_MMU, + .pdata = { + .name = "tesla", + .nr_tlb_entries = 32, + .clk_name = "tesla_ick", + }, + }, +#endif +}; +#define NR_OMAP4_IOMMU_DEVICES ARRAY_SIZE(omap4_devices) +static struct platform_device *omap4_iommu_pdev[NR_OMAP4_IOMMU_DEVICES]; +#else +#define omap4_devices NULL +#define NR_OMAP4_IOMMU_DEVICES 0 +#define omap4_iommu_pdev NULL +#endif + +static struct platform_device **omap_iommu_pdev; + +static int __init omap_iommu_init(void) +{ + int i, err; + struct resource res[] = { + { .flags = IORESOURCE_MEM }, + { .flags = IORESOURCE_IRQ }, + }; + + if (cpu_is_omap34xx()) { + devices = omap3_devices; + omap_iommu_pdev = omap3_iommu_pdev; + num_iommu_devices = NR_OMAP3_IOMMU_DEVICES; + } else if (cpu_is_omap44xx()) { + devices = omap4_devices; + omap_iommu_pdev = omap4_iommu_pdev; + num_iommu_devices = NR_OMAP4_IOMMU_DEVICES; + } else + return -ENODEV; + + for (i = 0; i < num_iommu_devices; i++) { + struct platform_device *pdev; + const struct iommu_device *d = &devices[i]; + + pdev = platform_device_alloc("omap-iommu", i); + if (!pdev) { + err = -ENOMEM; + goto err_out; + } + + res[0].start = d->base; + res[0].end = d->base + MMU_REG_SIZE - 1; + res[1].start = res[1].end = d->irq; + + err = platform_device_add_resources(pdev, res, + ARRAY_SIZE(res)); + if (err) + goto err_out; + err = platform_device_add_data(pdev, &d->pdata, + sizeof(d->pdata)); + if (err) + goto err_out; + err = platform_device_add(pdev); + if (err) + goto err_out; + omap_iommu_pdev[i] = pdev; + } + return 0; + +err_out: + while (i--) + platform_device_put(omap_iommu_pdev[i]); + return err; +} +module_init(omap_iommu_init); + +static void __exit omap_iommu_exit(void) +{ + int i; + + for (i = 0; i < num_iommu_devices; i++) + platform_device_unregister(omap_iommu_pdev[i]); +} +module_exit(omap_iommu_exit); + +MODULE_AUTHOR("Hiroshi DOYU"); +MODULE_DESCRIPTION("omap iommu: omap device registration"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 38153e5fbca0..1cf52313759e 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -24,7 +24,7 @@ #include <asm/localtimer.h> #include <asm/smp_scu.h> #include <mach/hardware.h> -#include <plat/common.h> +#include <mach/omap4-common.h> /* SCU base address */ static void __iomem *scu_base; diff --git a/arch/arm/mach-omap2/omap3-iommu.c b/arch/arm/mach-omap2/omap3-iommu.c deleted file mode 100644 index fbbcb5c83367..000000000000 --- a/arch/arm/mach-omap2/omap3-iommu.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * omap iommu: omap3 device registration - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> - -#include <plat/iommu.h> - -struct iommu_device { - resource_size_t base; - int irq; - struct iommu_platform_data pdata; - struct resource res[2]; -}; - -static struct iommu_device devices[] = { - { - .base = 0x480bd400, - .irq = 24, - .pdata = { - .name = "isp", - .nr_tlb_entries = 8, - .clk_name = "cam_ick", - }, - }, -#if defined(CONFIG_MPU_BRIDGE_IOMMU) - { - .base = 0x5d000000, - .irq = 28, - .pdata = { - .name = "iva2", - .nr_tlb_entries = 32, - .clk_name = "iva2_ck", - }, - }, -#endif -}; -#define NR_IOMMU_DEVICES ARRAY_SIZE(devices) - -static struct platform_device *omap3_iommu_pdev[NR_IOMMU_DEVICES]; - -static int __init omap3_iommu_init(void) -{ - int i, err; - struct resource res[] = { - { .flags = IORESOURCE_MEM }, - { .flags = IORESOURCE_IRQ }, - }; - - for (i = 0; i < NR_IOMMU_DEVICES; i++) { - struct platform_device *pdev; - const struct iommu_device *d = &devices[i]; - - pdev = platform_device_alloc("omap-iommu", i); - if (!pdev) { - err = -ENOMEM; - goto err_out; - } - - res[0].start = d->base; - res[0].end = d->base + MMU_REG_SIZE - 1; - res[1].start = res[1].end = d->irq; - - err = platform_device_add_resources(pdev, res, - ARRAY_SIZE(res)); - if (err) - goto err_out; - err = platform_device_add_data(pdev, &d->pdata, - sizeof(d->pdata)); - if (err) - goto err_out; - err = platform_device_add(pdev); - if (err) - goto err_out; - omap3_iommu_pdev[i] = pdev; - } - return 0; - -err_out: - while (i--) - platform_device_put(omap3_iommu_pdev[i]); - return err; -} -module_init(omap3_iommu_init); - -static void __exit omap3_iommu_exit(void) -{ - int i; - - for (i = 0; i < NR_IOMMU_DEVICES; i++) - platform_device_unregister(omap3_iommu_pdev[i]); -} -module_exit(omap3_iommu_exit); - -MODULE_AUTHOR("Hiroshi DOYU"); -MODULE_DESCRIPTION("omap iommu: omap3 device registration"); -MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c new file mode 100644 index 000000000000..13dc9794dcc2 --- /dev/null +++ b/arch/arm/mach-omap2/omap4-common.c @@ -0,0 +1,72 @@ +/* + * OMAP4 specific common source file. + * + * Copyright (C) 2010 Texas Instruments, Inc. + * Author: + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * + * This program is free software,you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/platform_device.h> + +#include <asm/hardware/gic.h> +#include <asm/hardware/cache-l2x0.h> + +#include <mach/hardware.h> +#include <mach/omap4-common.h> + +#ifdef CONFIG_CACHE_L2X0 +void __iomem *l2cache_base; +#endif + +void __iomem *gic_cpu_base_addr; +void __iomem *gic_dist_base_addr; + + +void __init gic_init_irq(void) +{ + /* Static mapping, never released */ + gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K); + BUG_ON(!gic_dist_base_addr); + gic_dist_init(0, gic_dist_base_addr, 29); + + /* Static mapping, never released */ + gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); + BUG_ON(!gic_cpu_base_addr); + gic_cpu_init(0, gic_cpu_base_addr); +} + +#ifdef CONFIG_CACHE_L2X0 +static int __init omap_l2_cache_init(void) +{ + /* + * To avoid code running on other OMAPs in + * multi-omap builds + */ + if (!cpu_is_omap44xx()) + return -ENODEV; + + /* Static mapping, never released */ + l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K); + BUG_ON(!l2cache_base); + + /* Enable PL310 L2 Cache controller */ + omap_smc1(0x102, 0x1); + + /* + * 32KB way size, 16-way associativity, + * parity disabled + */ + l2x0_init(l2cache_base, 0x0e050000, 0xc0000fff); + + return 0; +} +early_initcall(omap_l2_cache_init); +#endif diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 2c12e8cd7183..95c9a5f774e1 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2,12 +2,12 @@ * omap_hwmod implementation for OMAP2/3/4 * * Copyright (C) 2009 Nokia Corporation - * Paul Walmsley - * With fixes and testing from Kevin Hilman * - * Created in collaboration with (alphabetical order): Benoit Cousson, - * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari - * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff + * Paul Walmsley, Benoît Cousson, Kevin Hilman + * + * Created in collaboration with (alphabetical order): Thara Gopinath, + * Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari Poussa, Anand + * Sawant, Santosh Shilimkar, Richard Woodruff * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -57,7 +57,7 @@ #define MAX_MODULE_RESET_WAIT 10000 /* Name of the OMAP hwmod for the MPU */ -#define MPU_INITIATOR_NAME "mpu_hwmod" +#define MPU_INITIATOR_NAME "mpu" /* omap_hwmod_list contains all registered struct omap_hwmods */ static LIST_HEAD(omap_hwmod_list); @@ -403,21 +403,20 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh) */ static int _init_main_clk(struct omap_hwmod *oh) { - struct clk *c; int ret = 0; if (!oh->main_clk) return 0; - c = omap_clk_get_by_name(oh->main_clk); - WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get main_clk %s\n", - oh->name, oh->main_clk); - if (IS_ERR(c)) - ret = -EINVAL; - oh->_clk = c; + oh->_clk = omap_clk_get_by_name(oh->main_clk); + if (!oh->_clk) + pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n", + oh->name, oh->main_clk); + return -EINVAL; - WARN(!c->clkdm, "omap_hwmod: %s: missing clockdomain for %s.\n", - oh->main_clk, c->name); + if (!oh->_clk->clkdm) + pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n", + oh->main_clk, oh->_clk->name); return ret; } @@ -431,7 +430,6 @@ static int _init_main_clk(struct omap_hwmod *oh) */ static int _init_interface_clks(struct omap_hwmod *oh) { - struct omap_hwmod_ocp_if *os; struct clk *c; int i; int ret = 0; @@ -439,14 +437,16 @@ static int _init_interface_clks(struct omap_hwmod *oh) if (oh->slaves_cnt == 0) return 0; - for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) { + for (i = 0; i < oh->slaves_cnt; i++) { + struct omap_hwmod_ocp_if *os = oh->slaves[i]; + if (!os->clk) continue; c = omap_clk_get_by_name(os->clk); - WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get " - "interface_clk %s\n", oh->name, os->clk); - if (IS_ERR(c)) + if (!c) + pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n", + oh->name, os->clk); ret = -EINVAL; os->_clk = c; } @@ -470,9 +470,9 @@ static int _init_opt_clks(struct omap_hwmod *oh) for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) { c = omap_clk_get_by_name(oc->clk); - WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get opt_clk " - "%s\n", oh->name, oc->clk); - if (IS_ERR(c)) + if (!c) + pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n", + oh->name, oc->clk); ret = -EINVAL; oc->_clk = c; } @@ -489,19 +489,19 @@ static int _init_opt_clks(struct omap_hwmod *oh) */ static int _enable_clocks(struct omap_hwmod *oh) { - struct omap_hwmod_ocp_if *os; int i; pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name); - if (oh->_clk && !IS_ERR(oh->_clk)) + if (oh->_clk) clk_enable(oh->_clk); if (oh->slaves_cnt > 0) { - for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) { + for (i = 0; i < oh->slaves_cnt; i++) { + struct omap_hwmod_ocp_if *os = oh->slaves[i]; struct clk *c = os->_clk; - if (c && !IS_ERR(c) && (os->flags & OCPIF_SWSUP_IDLE)) + if (c && (os->flags & OCPIF_SWSUP_IDLE)) clk_enable(c); } } @@ -519,19 +519,19 @@ static int _enable_clocks(struct omap_hwmod *oh) */ static int _disable_clocks(struct omap_hwmod *oh) { - struct omap_hwmod_ocp_if *os; int i; pr_debug("omap_hwmod: %s: disabling clocks\n", oh->name); - if (oh->_clk && !IS_ERR(oh->_clk)) + if (oh->_clk) clk_disable(oh->_clk); if (oh->slaves_cnt > 0) { - for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) { + for (i = 0; i < oh->slaves_cnt; i++) { + struct omap_hwmod_ocp_if *os = oh->slaves[i]; struct clk *c = os->_clk; - if (c && !IS_ERR(c) && (os->flags & OCPIF_SWSUP_IDLE)) + if (c && (os->flags & OCPIF_SWSUP_IDLE)) clk_disable(c); } } @@ -550,14 +550,15 @@ static int _disable_clocks(struct omap_hwmod *oh) */ static int _find_mpu_port_index(struct omap_hwmod *oh) { - struct omap_hwmod_ocp_if *os; int i; int found = 0; if (!oh || oh->slaves_cnt == 0) return -EINVAL; - for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) { + for (i = 0; i < oh->slaves_cnt; i++) { + struct omap_hwmod_ocp_if *os = oh->slaves[i]; + if (os->user & OCP_USER_MPU) { found = 1; break; @@ -592,7 +593,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index) if (!oh || oh->slaves_cnt == 0) return NULL; - os = *oh->slaves + index; + os = oh->slaves[index]; for (i = 0, mem = os->addr; i < os->addr_cnt; i++, mem++) { if (mem->flags & ADDR_TYPE_RT) { @@ -780,9 +781,10 @@ static int _init_clocks(struct omap_hwmod *oh) ret |= _init_interface_clks(oh); ret |= _init_opt_clks(oh); - oh->_state = _HWMOD_STATE_CLKS_INITED; + if (!ret) + oh->_state = _HWMOD_STATE_CLKS_INITED; - return ret; + return 0; } /** @@ -805,9 +807,9 @@ static int _wait_target_ready(struct omap_hwmod *oh) if (oh->_int_flags & _HWMOD_NO_MPU_PORT) return 0; - os = *oh->slaves + oh->_mpu_port_index; + os = oh->slaves[oh->_mpu_port_index]; - if (!(os->flags & OCPIF_HAS_IDLEST)) + if (oh->flags & HWMOD_NO_IDLEST) return 0; /* XXX check module SIDLEMODE */ @@ -818,11 +820,8 @@ static int _wait_target_ready(struct omap_hwmod *oh) ret = omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs, oh->prcm.omap2.idlest_reg_id, oh->prcm.omap2.idlest_idle_bit); -#if 0 } else if (cpu_is_omap44xx()) { - ret = omap4_cm_wait_module_ready(oh->prcm.omap4.module_offs, - oh->prcm.omap4.device_offs); -#endif + ret = omap4_cm_wait_module_ready(oh->prcm.omap4.clkctrl_reg); } else { BUG(); }; @@ -911,16 +910,21 @@ static int _enable(struct omap_hwmod *oh) _add_initiator_dep(oh, mpu_oh); _enable_clocks(oh); - if (oh->class->sysc) { - if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED)) - _update_sysc_cache(oh); - _sysc_enable(oh); - } - r = _wait_target_ready(oh); - if (!r) + if (!r) { oh->_state = _HWMOD_STATE_ENABLED; + /* Access the sysconfig only if the target is ready */ + if (oh->class->sysc) { + if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED)) + _update_sysc_cache(oh); + _sysc_enable(oh); + } + } else { + pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n", + oh->name, r); + } + return r; } @@ -997,18 +1001,18 @@ static int _shutdown(struct omap_hwmod *oh) */ static int _setup(struct omap_hwmod *oh) { - struct omap_hwmod_ocp_if *os; - int i; + int i, r; if (!oh) return -EINVAL; /* Set iclk autoidle mode */ if (oh->slaves_cnt > 0) { - for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) { + for (i = 0; i < oh->slaves_cnt; i++) { + struct omap_hwmod_ocp_if *os = oh->slaves[i]; struct clk *c = os->_clk; - if (!c || IS_ERR(c)) + if (!c) continue; if (os->flags & OCPIF_SWSUP_IDLE) { @@ -1022,7 +1026,12 @@ static int _setup(struct omap_hwmod *oh) oh->_state = _HWMOD_STATE_INITIALIZED; - _enable(oh); + r = _enable(oh); + if (r) { + pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n", + oh->name, oh->_state); + return 0; + } if (!(oh->flags & HWMOD_INIT_NO_RESET)) { /* @@ -1430,7 +1439,7 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh) ret = oh->mpu_irqs_cnt + oh->sdma_chs_cnt; for (i = 0; i < oh->slaves_cnt; i++) - ret += (*oh->slaves + i)->addr_cnt; + ret += oh->slaves[i]->addr_cnt; return ret; } @@ -1471,7 +1480,7 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) for (i = 0; i < oh->slaves_cnt; i++) { struct omap_hwmod_ocp_if *os; - os = *oh->slaves + i; + os = oh->slaves[i]; for (j = 0; j < os->addr_cnt; j++) { (res + r)->start = (os->addr + j)->pa_start; diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index eb7ee2453b24..e5530c51f77d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -125,7 +125,7 @@ static struct omap_hwmod_ocp_if *omap2420_mpu_masters[] = { /* MPU */ static struct omap_hwmod omap2420_mpu_hwmod = { - .name = "mpu_hwmod", + .name = "mpu", .class = &mpu_hwmod_class, .main_clk = "mpu_ck", .masters = omap2420_mpu_masters, diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 241bd8230729..0852d954da40 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -127,7 +127,7 @@ static struct omap_hwmod_ocp_if *omap2430_mpu_masters[] = { /* MPU */ static struct omap_hwmod omap2430_mpu_hwmod = { - .name = "mpu_hwmod", + .name = "mpu", .class = &mpu_hwmod_class, .main_clk = "mpu_ck", .masters = omap2430_mpu_masters, diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index ed6084004260..39b0c0eaa37d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -156,7 +156,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_mpu_masters[] = { /* MPU */ static struct omap_hwmod omap3xxx_mpu_hwmod = { - .name = "mpu_hwmod", + .name = "mpu", .class = &mpu_hwmod_class, .main_clk = "arm_fck", .masters = omap3xxx_mpu_masters, diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 6cac9817c243..723b44e252fd 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -548,6 +548,9 @@ static int option_set(void *data, u64 val) { u32 *option = data; + if (option == &wakeup_timer_milliseconds && val >= 1000) + return -EINVAL; + *option = val; if (option == &enable_off_mode) diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index bd6466a2b039..3de6ece23fc8 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -43,6 +43,7 @@ extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm); extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state); extern u32 wakeup_timer_seconds; +extern u32 wakeup_timer_milliseconds; extern struct omap_dm_timer *gptimer_wakeup; #ifdef CONFIG_PM_DEBUG diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 374299ea7ade..e321281ab6e1 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -70,8 +70,8 @@ static int omap2_fclks_active(void) f2 = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); /* Ignore UART clocks. These are handled by UART core (serial.c) */ - f1 &= ~(OMAP24XX_EN_UART1 | OMAP24XX_EN_UART2); - f2 &= ~OMAP24XX_EN_UART3; + f1 &= ~(OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_UART2_MASK); + f2 &= ~OMAP24XX_EN_UART3_MASK; if (f1 | f2) return 1; @@ -107,7 +107,7 @@ static void omap2_enter_full_retention(void) l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL; omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0); - omap2_gpio_prepare_for_retention(); + omap2_gpio_prepare_for_idle(PWRDM_POWER_RET); if (omap2_pm_debug) { omap2_pm_dump(0, 0, 0); @@ -141,7 +141,7 @@ no_sleep: tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC; omap2_pm_dump(0, 1, tmp); } - omap2_gpio_resume_after_retention(); + omap2_gpio_resume_after_idle(); clk_enable(osc_ck); @@ -170,7 +170,7 @@ static int omap2_i2c_active(void) u32 l; l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); - return l & (OMAP2420_EN_I2C2 | OMAP2420_EN_I2C1); + return l & (OMAP2420_EN_I2C2_MASK | OMAP2420_EN_I2C1_MASK); } static int sti_console_enabled; @@ -181,13 +181,13 @@ static int omap2_allow_mpu_retention(void) /* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */ l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); - if (l & (OMAP2420_EN_MMC | OMAP24XX_EN_UART2 | - OMAP24XX_EN_UART1 | OMAP24XX_EN_MCSPI2 | - OMAP24XX_EN_MCSPI1 | OMAP24XX_EN_DSS1)) + if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK | + OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK | + OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK)) return 0; /* Check for UART3. */ l = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); - if (l & OMAP24XX_EN_UART3) + if (l & OMAP24XX_EN_UART3_MASK) return 0; if (sti_console_enabled) return 0; @@ -215,12 +215,12 @@ static void omap2_enter_mpu_retention(void) /* Try to enter MPU retention */ prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) | - OMAP_LOGICRETSTATE, + OMAP_LOGICRETSTATE_MASK, MPU_MOD, OMAP2_PM_PWSTCTRL); } else { /* Block MPU retention */ - prm_write_mod_reg(OMAP_LOGICRETSTATE, MPU_MOD, + prm_write_mod_reg(OMAP_LOGICRETSTATE_MASK, MPU_MOD, OMAP2_PM_PWSTCTRL); only_idle = 1; } @@ -288,7 +288,8 @@ static int omap2_pm_suspend(void) u32 wken_wkup, mir1; wken_wkup = prm_read_mod_reg(WKUP_MOD, PM_WKEN); - prm_write_mod_reg(wken_wkup & ~OMAP24XX_EN_GPT1, WKUP_MOD, PM_WKEN); + wken_wkup &= ~OMAP24XX_EN_GPT1_MASK; + prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN); /* Mask GPT1 */ mir1 = omap_readl(0x480fe0a4); @@ -351,7 +352,7 @@ static void __init prcm_setup_regs(void) struct powerdomain *pwrdm; /* Enable autoidle */ - prm_write_mod_reg(OMAP24XX_AUTOIDLE, OCP_MOD, + prm_write_mod_reg(OMAP24XX_AUTOIDLE_MASK, OCP_MOD, OMAP2_PRCM_SYSCONFIG_OFFSET); /* @@ -390,53 +391,54 @@ static void __init prcm_setup_regs(void) clkdm_add_wkdep(mpu_clkdm, wkup_clkdm); /* Enable clock autoidle for all domains */ - cm_write_mod_reg(OMAP24XX_AUTO_CAM | - OMAP24XX_AUTO_MAILBOXES | - OMAP24XX_AUTO_WDT4 | - OMAP2420_AUTO_WDT3 | - OMAP24XX_AUTO_MSPRO | - OMAP2420_AUTO_MMC | - OMAP24XX_AUTO_FAC | - OMAP2420_AUTO_EAC | - OMAP24XX_AUTO_HDQ | - OMAP24XX_AUTO_UART2 | - OMAP24XX_AUTO_UART1 | - OMAP24XX_AUTO_I2C2 | - OMAP24XX_AUTO_I2C1 | - OMAP24XX_AUTO_MCSPI2 | - OMAP24XX_AUTO_MCSPI1 | - OMAP24XX_AUTO_MCBSP2 | - OMAP24XX_AUTO_MCBSP1 | - OMAP24XX_AUTO_GPT12 | - OMAP24XX_AUTO_GPT11 | - OMAP24XX_AUTO_GPT10 | - OMAP24XX_AUTO_GPT9 | - OMAP24XX_AUTO_GPT8 | - OMAP24XX_AUTO_GPT7 | - OMAP24XX_AUTO_GPT6 | - OMAP24XX_AUTO_GPT5 | - OMAP24XX_AUTO_GPT4 | - OMAP24XX_AUTO_GPT3 | - OMAP24XX_AUTO_GPT2 | - OMAP2420_AUTO_VLYNQ | - OMAP24XX_AUTO_DSS, + cm_write_mod_reg(OMAP24XX_AUTO_CAM_MASK | + OMAP24XX_AUTO_MAILBOXES_MASK | + OMAP24XX_AUTO_WDT4_MASK | + OMAP2420_AUTO_WDT3_MASK | + OMAP24XX_AUTO_MSPRO_MASK | + OMAP2420_AUTO_MMC_MASK | + OMAP24XX_AUTO_FAC_MASK | + OMAP2420_AUTO_EAC_MASK | + OMAP24XX_AUTO_HDQ_MASK | + OMAP24XX_AUTO_UART2_MASK | + OMAP24XX_AUTO_UART1_MASK | + OMAP24XX_AUTO_I2C2_MASK | + OMAP24XX_AUTO_I2C1_MASK | + OMAP24XX_AUTO_MCSPI2_MASK | + OMAP24XX_AUTO_MCSPI1_MASK | + OMAP24XX_AUTO_MCBSP2_MASK | + OMAP24XX_AUTO_MCBSP1_MASK | + OMAP24XX_AUTO_GPT12_MASK | + OMAP24XX_AUTO_GPT11_MASK | + OMAP24XX_AUTO_GPT10_MASK | + OMAP24XX_AUTO_GPT9_MASK | + OMAP24XX_AUTO_GPT8_MASK | + OMAP24XX_AUTO_GPT7_MASK | + OMAP24XX_AUTO_GPT6_MASK | + OMAP24XX_AUTO_GPT5_MASK | + OMAP24XX_AUTO_GPT4_MASK | + OMAP24XX_AUTO_GPT3_MASK | + OMAP24XX_AUTO_GPT2_MASK | + OMAP2420_AUTO_VLYNQ_MASK | + OMAP24XX_AUTO_DSS_MASK, CORE_MOD, CM_AUTOIDLE1); - cm_write_mod_reg(OMAP24XX_AUTO_UART3 | - OMAP24XX_AUTO_SSI | - OMAP24XX_AUTO_USB, + cm_write_mod_reg(OMAP24XX_AUTO_UART3_MASK | + OMAP24XX_AUTO_SSI_MASK | + OMAP24XX_AUTO_USB_MASK, CORE_MOD, CM_AUTOIDLE2); - cm_write_mod_reg(OMAP24XX_AUTO_SDRC | - OMAP24XX_AUTO_GPMC | - OMAP24XX_AUTO_SDMA, + cm_write_mod_reg(OMAP24XX_AUTO_SDRC_MASK | + OMAP24XX_AUTO_GPMC_MASK | + OMAP24XX_AUTO_SDMA_MASK, CORE_MOD, CM_AUTOIDLE3); - cm_write_mod_reg(OMAP24XX_AUTO_PKA | - OMAP24XX_AUTO_AES | - OMAP24XX_AUTO_RNG | - OMAP24XX_AUTO_SHA | - OMAP24XX_AUTO_DES, + cm_write_mod_reg(OMAP24XX_AUTO_PKA_MASK | + OMAP24XX_AUTO_AES_MASK | + OMAP24XX_AUTO_RNG_MASK | + OMAP24XX_AUTO_SHA_MASK | + OMAP24XX_AUTO_DES_MASK, CORE_MOD, OMAP24XX_CM_AUTOIDLE4); - cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI, OMAP24XX_DSP_MOD, CM_AUTOIDLE); + cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI_MASK, OMAP24XX_DSP_MOD, + CM_AUTOIDLE); /* Put DPLL and both APLLs into autoidle mode */ cm_write_mod_reg((0x03 << OMAP24XX_AUTO_DPLL_SHIFT) | @@ -444,12 +446,12 @@ static void __init prcm_setup_regs(void) (0x03 << OMAP24XX_AUTO_54M_SHIFT), PLL_MOD, CM_AUTOIDLE); - cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL | - OMAP24XX_AUTO_WDT1 | - OMAP24XX_AUTO_MPU_WDT | - OMAP24XX_AUTO_GPIOS | - OMAP24XX_AUTO_32KSYNC | - OMAP24XX_AUTO_GPT1, + cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL_MASK | + OMAP24XX_AUTO_WDT1_MASK | + OMAP24XX_AUTO_MPU_WDT_MASK | + OMAP24XX_AUTO_GPIOS_MASK | + OMAP24XX_AUTO_32KSYNC_MASK | + OMAP24XX_AUTO_GPT1_MASK, WKUP_MOD, CM_AUTOIDLE); /* REVISIT: Configure number of 32 kHz clock cycles for sys_clk @@ -460,15 +462,15 @@ static void __init prcm_setup_regs(void) /* Configure automatic voltage transition */ prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTSETUP_OFFSET); - prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT | + prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT_MASK | (0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) | - OMAP24XX_MEMRETCTRL | + OMAP24XX_MEMRETCTRL_MASK | (0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) | (0x0 << OMAP24XX_VOLT_LEVEL_SHIFT), OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET); /* Enable wake-up events */ - prm_write_mod_reg(OMAP24XX_EN_GPIOS | OMAP24XX_EN_GPT1, + prm_write_mod_reg(OMAP24XX_EN_GPIOS_MASK | OMAP24XX_EN_GPT1_MASK, WKUP_MOD, PM_WKEN); } diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index ea0000bc5358..2e967716cc3f 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -58,6 +58,7 @@ u32 enable_off_mode; u32 sleep_while_idle; u32 wakeup_timer_seconds; +u32 wakeup_timer_milliseconds; struct power_state { struct powerdomain *pwrdm; @@ -93,19 +94,20 @@ static void omap3_enable_io_chain(void) int timeout = 0; if (omap_rev() >= OMAP3430_REV_ES3_1) { - prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN, WKUP_MOD, PM_WKEN); + prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); /* Do a readback to assure write has been done */ prm_read_mod_reg(WKUP_MOD, PM_WKEN); while (!(prm_read_mod_reg(WKUP_MOD, PM_WKST) & - OMAP3430_ST_IO_CHAIN)) { + OMAP3430_ST_IO_CHAIN_MASK)) { timeout++; if (timeout > 1000) { printk(KERN_ERR "Wake up daisy chain " "activation failed.\n"); return; } - prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN, + prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD, PM_WKST); } } @@ -114,7 +116,8 @@ static void omap3_enable_io_chain(void) static void omap3_disable_io_chain(void) { if (omap_rev() >= OMAP3430_REV_ES3_1) - prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN, WKUP_MOD, PM_WKEN); + prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); } static void omap3_core_save_context(void) @@ -267,14 +270,18 @@ static int _prcm_int_handle_wakeup(void) */ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) { - u32 irqstatus_mpu; + u32 irqenable_mpu, irqstatus_mpu; int c = 0; - do { - irqstatus_mpu = prm_read_mod_reg(OCP_MOD, - OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + irqenable_mpu = prm_read_mod_reg(OCP_MOD, + OMAP3_PRM_IRQENABLE_MPU_OFFSET); + irqstatus_mpu = prm_read_mod_reg(OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + irqstatus_mpu &= irqenable_mpu; - if (irqstatus_mpu & (OMAP3430_WKUP_ST | OMAP3430_IO_ST)) { + do { + if (irqstatus_mpu & (OMAP3430_WKUP_ST_MASK | + OMAP3430_IO_ST_MASK)) { c = _prcm_int_handle_wakeup(); /* @@ -292,7 +299,11 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) prm_write_mod_reg(irqstatus_mpu, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - } while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET)); + irqstatus_mpu = prm_read_mod_reg(OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + irqstatus_mpu &= irqenable_mpu; + + } while (irqstatus_mpu); return IRQ_HANDLED; } @@ -371,12 +382,19 @@ void omap_sram_idle(void) if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON) pwrdm_set_next_pwrst(neon_pwrdm, mpu_next_state); - /* PER */ + /* Enable IO-PAD and IO-CHAIN wakeups */ per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); + if (per_next_state < PWRDM_POWER_ON || + core_next_state < PWRDM_POWER_ON) { + prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); + omap3_enable_io_chain(); + } + + /* PER */ if (per_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(2); - omap2_gpio_prepare_for_retention(); + omap2_gpio_prepare_for_idle(per_next_state); if (per_next_state == PWRDM_POWER_OFF) { if (core_next_state == PWRDM_POWER_ON) { per_next_state = PWRDM_POWER_RET; @@ -398,10 +416,8 @@ void omap_sram_idle(void) omap3_core_save_context(); omap3_prcm_save_context(); } - /* Enable IO-PAD and IO-CHAIN wakeups */ - prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN); - omap3_enable_io_chain(); } + omap3_intc_prepare_idle(); /* @@ -445,7 +461,7 @@ void omap_sram_idle(void) omap_uart_resume_idle(0); omap_uart_resume_idle(1); if (core_next_state == PWRDM_POWER_OFF) - prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF, + prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK, OMAP3430_GR_MOD, OMAP3_PRM_VOLTCTRL_OFFSET); } @@ -454,9 +470,9 @@ void omap_sram_idle(void) /* PER */ if (per_next_state < PWRDM_POWER_ON) { per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm); + omap2_gpio_resume_after_idle(); if (per_prev_state == PWRDM_POWER_OFF) omap3_per_restore_context(); - omap2_gpio_resume_after_retention(); omap_uart_resume_idle(2); if (per_state_modified) pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF); @@ -464,7 +480,7 @@ void omap_sram_idle(void) /* Disable IO-PAD and IO-CHAIN wakeup */ if (core_next_state < PWRDM_POWER_ON) { - prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN); + prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); omap3_disable_io_chain(); } @@ -548,20 +564,21 @@ out: #ifdef CONFIG_SUSPEND static suspend_state_t suspend_state; -static void omap2_pm_wakeup_on_timer(u32 seconds) +static void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds) { u32 tick_rate, cycles; - if (!seconds) + if (!seconds && !milliseconds) return; tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup)); - cycles = tick_rate * seconds; + cycles = tick_rate * seconds + tick_rate * milliseconds / 1000; omap_dm_timer_stop(gptimer_wakeup); omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles); - pr_info("PM: Resume timer in %d secs (%d ticks at %d ticks/sec.)\n", - seconds, cycles, tick_rate); + pr_info("PM: Resume timer in %u.%03u secs" + " (%d ticks at %d ticks/sec.)\n", + seconds, milliseconds, cycles, tick_rate); } static int omap3_pm_prepare(void) @@ -575,8 +592,9 @@ static int omap3_pm_suspend(void) struct power_state *pwrst; int state, ret = 0; - if (wakeup_timer_seconds) - omap2_pm_wakeup_on_timer(wakeup_timer_seconds); + if (wakeup_timer_seconds || wakeup_timer_milliseconds) + omap2_pm_wakeup_on_timer(wakeup_timer_seconds, + wakeup_timer_milliseconds); /* Read current next_pwrsts */ list_for_each_entry(pwrst, &pwrst_list, node) @@ -683,9 +701,9 @@ static void __init omap3_iva_idle(void) return; /* Reset IVA2 */ - prm_write_mod_reg(OMAP3430_RST1_IVA2 | - OMAP3430_RST2_IVA2 | - OMAP3430_RST3_IVA2, + prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK | + OMAP3430_RST2_IVA2_MASK | + OMAP3430_RST3_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL); /* Enable IVA2 clock */ @@ -703,9 +721,9 @@ static void __init omap3_iva_idle(void) cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN); /* Reset IVA2 */ - prm_write_mod_reg(OMAP3430_RST1_IVA2 | - OMAP3430_RST2_IVA2 | - OMAP3430_RST3_IVA2, + prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK | + OMAP3430_RST2_IVA2_MASK | + OMAP3430_RST3_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL); } @@ -727,8 +745,8 @@ static void __init omap3_d2d_idle(void) omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK); /* reset modem */ - prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON | - OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST, + prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK | + OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK, CORE_MOD, OMAP2_RM_RSTCTRL); prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL); } @@ -754,102 +772,102 @@ static void __init prcm_setup_regs(void) * Note that in the long run this should be done by clockfw */ cm_write_mod_reg( - OMAP3430_AUTO_MODEM | - OMAP3430ES2_AUTO_MMC3 | - OMAP3430ES2_AUTO_ICR | - OMAP3430_AUTO_AES2 | - OMAP3430_AUTO_SHA12 | - OMAP3430_AUTO_DES2 | - OMAP3430_AUTO_MMC2 | - OMAP3430_AUTO_MMC1 | - OMAP3430_AUTO_MSPRO | - OMAP3430_AUTO_HDQ | - OMAP3430_AUTO_MCSPI4 | - OMAP3430_AUTO_MCSPI3 | - OMAP3430_AUTO_MCSPI2 | - OMAP3430_AUTO_MCSPI1 | - OMAP3430_AUTO_I2C3 | - OMAP3430_AUTO_I2C2 | - OMAP3430_AUTO_I2C1 | - OMAP3430_AUTO_UART2 | - OMAP3430_AUTO_UART1 | - OMAP3430_AUTO_GPT11 | - OMAP3430_AUTO_GPT10 | - OMAP3430_AUTO_MCBSP5 | - OMAP3430_AUTO_MCBSP1 | - OMAP3430ES1_AUTO_FAC | /* This is es1 only */ - OMAP3430_AUTO_MAILBOXES | - OMAP3430_AUTO_OMAPCTRL | - OMAP3430ES1_AUTO_FSHOSTUSB | - OMAP3430_AUTO_HSOTGUSB | - OMAP3430_AUTO_SAD2D | - OMAP3430_AUTO_SSI, + OMAP3430_AUTO_MODEM_MASK | + OMAP3430ES2_AUTO_MMC3_MASK | + OMAP3430ES2_AUTO_ICR_MASK | + OMAP3430_AUTO_AES2_MASK | + OMAP3430_AUTO_SHA12_MASK | + OMAP3430_AUTO_DES2_MASK | + OMAP3430_AUTO_MMC2_MASK | + OMAP3430_AUTO_MMC1_MASK | + OMAP3430_AUTO_MSPRO_MASK | + OMAP3430_AUTO_HDQ_MASK | + OMAP3430_AUTO_MCSPI4_MASK | + OMAP3430_AUTO_MCSPI3_MASK | + OMAP3430_AUTO_MCSPI2_MASK | + OMAP3430_AUTO_MCSPI1_MASK | + OMAP3430_AUTO_I2C3_MASK | + OMAP3430_AUTO_I2C2_MASK | + OMAP3430_AUTO_I2C1_MASK | + OMAP3430_AUTO_UART2_MASK | + OMAP3430_AUTO_UART1_MASK | + OMAP3430_AUTO_GPT11_MASK | + OMAP3430_AUTO_GPT10_MASK | + OMAP3430_AUTO_MCBSP5_MASK | + OMAP3430_AUTO_MCBSP1_MASK | + OMAP3430ES1_AUTO_FAC_MASK | /* This is es1 only */ + OMAP3430_AUTO_MAILBOXES_MASK | + OMAP3430_AUTO_OMAPCTRL_MASK | + OMAP3430ES1_AUTO_FSHOSTUSB_MASK | + OMAP3430_AUTO_HSOTGUSB_MASK | + OMAP3430_AUTO_SAD2D_MASK | + OMAP3430_AUTO_SSI_MASK, CORE_MOD, CM_AUTOIDLE1); cm_write_mod_reg( - OMAP3430_AUTO_PKA | - OMAP3430_AUTO_AES1 | - OMAP3430_AUTO_RNG | - OMAP3430_AUTO_SHA11 | - OMAP3430_AUTO_DES1, + OMAP3430_AUTO_PKA_MASK | + OMAP3430_AUTO_AES1_MASK | + OMAP3430_AUTO_RNG_MASK | + OMAP3430_AUTO_SHA11_MASK | + OMAP3430_AUTO_DES1_MASK, CORE_MOD, CM_AUTOIDLE2); if (omap_rev() > OMAP3430_REV_ES1_0) { cm_write_mod_reg( - OMAP3430_AUTO_MAD2D | - OMAP3430ES2_AUTO_USBTLL, + OMAP3430_AUTO_MAD2D_MASK | + OMAP3430ES2_AUTO_USBTLL_MASK, CORE_MOD, CM_AUTOIDLE3); } cm_write_mod_reg( - OMAP3430_AUTO_WDT2 | - OMAP3430_AUTO_WDT1 | - OMAP3430_AUTO_GPIO1 | - OMAP3430_AUTO_32KSYNC | - OMAP3430_AUTO_GPT12 | - OMAP3430_AUTO_GPT1 , + OMAP3430_AUTO_WDT2_MASK | + OMAP3430_AUTO_WDT1_MASK | + OMAP3430_AUTO_GPIO1_MASK | + OMAP3430_AUTO_32KSYNC_MASK | + OMAP3430_AUTO_GPT12_MASK | + OMAP3430_AUTO_GPT1_MASK, WKUP_MOD, CM_AUTOIDLE); cm_write_mod_reg( - OMAP3430_AUTO_DSS, + OMAP3430_AUTO_DSS_MASK, OMAP3430_DSS_MOD, CM_AUTOIDLE); cm_write_mod_reg( - OMAP3430_AUTO_CAM, + OMAP3430_AUTO_CAM_MASK, OMAP3430_CAM_MOD, CM_AUTOIDLE); cm_write_mod_reg( - OMAP3430_AUTO_GPIO6 | - OMAP3430_AUTO_GPIO5 | - OMAP3430_AUTO_GPIO4 | - OMAP3430_AUTO_GPIO3 | - OMAP3430_AUTO_GPIO2 | - OMAP3430_AUTO_WDT3 | - OMAP3430_AUTO_UART3 | - OMAP3430_AUTO_GPT9 | - OMAP3430_AUTO_GPT8 | - OMAP3430_AUTO_GPT7 | - OMAP3430_AUTO_GPT6 | - OMAP3430_AUTO_GPT5 | - OMAP3430_AUTO_GPT4 | - OMAP3430_AUTO_GPT3 | - OMAP3430_AUTO_GPT2 | - OMAP3430_AUTO_MCBSP4 | - OMAP3430_AUTO_MCBSP3 | - OMAP3430_AUTO_MCBSP2, + OMAP3430_AUTO_GPIO6_MASK | + OMAP3430_AUTO_GPIO5_MASK | + OMAP3430_AUTO_GPIO4_MASK | + OMAP3430_AUTO_GPIO3_MASK | + OMAP3430_AUTO_GPIO2_MASK | + OMAP3430_AUTO_WDT3_MASK | + OMAP3430_AUTO_UART3_MASK | + OMAP3430_AUTO_GPT9_MASK | + OMAP3430_AUTO_GPT8_MASK | + OMAP3430_AUTO_GPT7_MASK | + OMAP3430_AUTO_GPT6_MASK | + OMAP3430_AUTO_GPT5_MASK | + OMAP3430_AUTO_GPT4_MASK | + OMAP3430_AUTO_GPT3_MASK | + OMAP3430_AUTO_GPT2_MASK | + OMAP3430_AUTO_MCBSP4_MASK | + OMAP3430_AUTO_MCBSP3_MASK | + OMAP3430_AUTO_MCBSP2_MASK, OMAP3430_PER_MOD, CM_AUTOIDLE); if (omap_rev() > OMAP3430_REV_ES1_0) { cm_write_mod_reg( - OMAP3430ES2_AUTO_USBHOST, + OMAP3430ES2_AUTO_USBHOST_MASK, OMAP3430ES2_USBHOST_MOD, CM_AUTOIDLE); } - omap_ctrl_writel(OMAP3430_AUTOIDLE, OMAP2_CONTROL_SYSCONFIG); + omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG); /* * Set all plls to autoidle. This is needed until autoidle is @@ -879,35 +897,40 @@ static void __init prcm_setup_regs(void) OMAP3_PRM_CLKSRC_CTRL_OFFSET); /* setup wakup source */ - prm_write_mod_reg(OMAP3430_EN_IO | OMAP3430_EN_GPIO1 | - OMAP3430_EN_GPT1 | OMAP3430_EN_GPT12, + prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK | + OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK, WKUP_MOD, PM_WKEN); /* No need to write EN_IO, that is always enabled */ - prm_write_mod_reg(OMAP3430_EN_GPIO1 | OMAP3430_EN_GPT1 | - OMAP3430_EN_GPT12, + prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK | + OMAP3430_GRPSEL_GPT1_MASK | + OMAP3430_GRPSEL_GPT12_MASK, WKUP_MOD, OMAP3430_PM_MPUGRPSEL); /* For some reason IO doesn't generate wakeup event even if * it is selected to mpu wakeup goup */ - prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN, + prm_write_mod_reg(OMAP3430_IO_EN_MASK | OMAP3430_WKUP_EN_MASK, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); /* Enable PM_WKEN to support DSS LPR */ - prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS, + prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK, OMAP3430_DSS_MOD, PM_WKEN); /* Enable wakeups in PER */ - prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 | - OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 | - OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3 | - OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 | - OMAP3430_EN_MCBSP4, + prm_write_mod_reg(OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK | + OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK | + OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK | + OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK | + OMAP3430_EN_MCBSP4_MASK, OMAP3430_PER_MOD, PM_WKEN); /* and allow them to wake up MPU */ - prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 | - OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 | - OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3 | - OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 | - OMAP3430_EN_MCBSP4, + prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2_MASK | + OMAP3430_GRPSEL_GPIO3_MASK | + OMAP3430_GRPSEL_GPIO4_MASK | + OMAP3430_GRPSEL_GPIO5_MASK | + OMAP3430_GRPSEL_GPIO6_MASK | + OMAP3430_GRPSEL_UART3_MASK | + OMAP3430_GRPSEL_MCBSP2_MASK | + OMAP3430_GRPSEL_MCBSP3_MASK | + OMAP3430_GRPSEL_MCBSP4_MASK, OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL); /* Don't attach IVA interrupts */ @@ -1080,14 +1103,6 @@ static int __init omap3_pm_init(void) omap3_idle_init(); clkdm_add_wkdep(neon_clkdm, mpu_clkdm); - /* - * REVISIT: This wkdep is only necessary when GPIO2-6 are enabled for - * IO-pad wakeup. Otherwise it will unnecessarily waste power - * waking up PER with every CORE wakeup - see - * http://marc.info/?l=linux-omap&m=121852150710062&w=2 - */ - clkdm_add_wkdep(per_clkdm, core_clkdm); - if (omap_type() != OMAP2_DEVICE_TYPE_GP) { omap3_secure_ram_storage = kmalloc(0x803F, GFP_KERNEL); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index ebfce7d1a5d3..a2904aa7065e 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -5,8 +5,8 @@ * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley - * * Added OMAP4 specific support by Abhijit Pagare <abhijitpagare@ti.com> + * State counting code by Tero Kristo <tero.kristo@nokia.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -64,10 +64,10 @@ static u16 pwrstst_reg_offs; #define OMAP_MEM4_ONSTATE_MASK OMAP4430_OCP_NRET_BANK_ONSTATE_MASK /* OMAP3 and OMAP4 Memory Retstate Masks (common across all power domains) */ -#define OMAP_MEM0_RETSTATE_MASK OMAP3430_SHAREDL1CACHEFLATRETSTATE -#define OMAP_MEM1_RETSTATE_MASK OMAP3430_L1FLATMEMRETSTATE -#define OMAP_MEM2_RETSTATE_MASK OMAP3430_SHAREDL2CACHEFLATRETSTATE -#define OMAP_MEM3_RETSTATE_MASK OMAP3430_L2FLATMEMRETSTATE +#define OMAP_MEM0_RETSTATE_MASK OMAP3430_SHAREDL1CACHEFLATRETSTATE_MASK +#define OMAP_MEM1_RETSTATE_MASK OMAP3430_L1FLATMEMRETSTATE_MASK +#define OMAP_MEM2_RETSTATE_MASK OMAP3430_SHAREDL2CACHEFLATRETSTATE_MASK +#define OMAP_MEM3_RETSTATE_MASK OMAP3430_L2FLATMEMRETSTATE_MASK #define OMAP_MEM4_RETSTATE_MASK OMAP4430_OCP_NRET_BANK_RETSTATE_MASK /* OMAP3 and OMAP4 Memory Status bits */ @@ -511,6 +511,8 @@ int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) */ int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) { + u32 v; + if (!pwrdm) return -EINVAL; @@ -526,9 +528,9 @@ int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) * but the type of value returned is the same for each * powerdomain. */ - prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE, - (pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE)), - pwrdm->prcm_offs, pwrstctrl_reg_offs); + v = pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE_MASK); + prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE_MASK, v, + pwrdm->prcm_offs, pwrstctrl_reg_offs); return 0; } @@ -676,8 +678,8 @@ int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm) if (!pwrdm) return -EINVAL; - return prm_read_mod_bits_shift(pwrdm->prcm_offs, - pwrstst_reg_offs, OMAP3430_LOGICSTATEST); + return prm_read_mod_bits_shift(pwrdm->prcm_offs, pwrstst_reg_offs, + OMAP3430_LOGICSTATEST_MASK); } /** @@ -700,7 +702,7 @@ int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm) * powerdomain. */ return prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST, - OMAP3430_LASTLOGICSTATEENTERED); + OMAP3430_LASTLOGICSTATEENTERED_MASK); } /** @@ -723,7 +725,7 @@ int pwrdm_read_logic_retst(struct powerdomain *pwrdm) * powerdomain. */ return prm_read_mod_bits_shift(pwrdm->prcm_offs, pwrstctrl_reg_offs, - OMAP3430_LOGICSTATEST); + OMAP3430_LOGICSTATEST_MASK); } /** @@ -978,6 +980,34 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm) } /** + * pwrdm_set_lowpwrstchange - Request a low power state change + * @pwrdm: struct powerdomain * + * + * Allows a powerdomain to transtion to a lower power sleep state + * from an existing sleep state without waking up the powerdomain. + * Returns -EINVAL if the powerdomain pointer is null or if the + * powerdomain does not support LOWPOWERSTATECHANGE, or returns 0 + * upon success. + */ +int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm) +{ + if (!pwrdm) + return -EINVAL; + + if (!(pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) + return -EINVAL; + + pr_debug("powerdomain: %s: setting LOWPOWERSTATECHANGE bit\n", + pwrdm->name); + + prm_rmw_mod_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK, + (1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT), + pwrdm->prcm_offs, pwrstctrl_reg_offs); + + return 0; +} + +/** * pwrdm_wait_transition - wait for powerdomain power transition to finish * @pwrdm: struct powerdomain * to wait for * @@ -1002,7 +1032,7 @@ int pwrdm_wait_transition(struct powerdomain *pwrdm) /* XXX Is this udelay() value meaningful? */ while ((prm_read_mod_reg(pwrdm->prcm_offs, pwrstst_reg_offs) & - OMAP_INTRANSITION) && + OMAP_INTRANSITION_MASK) && (c++ < PWRDM_TRANSITION_BAILOUT)) udelay(1); diff --git a/arch/arm/mach-omap2/powerdomains44xx.h b/arch/arm/mach-omap2/powerdomains44xx.h index c1015147d579..c7219513472a 100644 --- a/arch/arm/mach-omap2/powerdomains44xx.h +++ b/arch/arm/mach-omap2/powerdomains44xx.h @@ -1,12 +1,12 @@ /* * OMAP4 Power domains framework * - * Copyright (C) 2009 Texas Instruments, Inc. - * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2009-2010 Texas Instruments, Inc. + * Copyright (C) 2009-2010 Nokia Corporation * * Abhijit Pagare (abhijitpagare@ti.com) * Benoit Cousson (b-cousson@ti.com) - * Paul Walmsley + * Paul Walmsley (paul@pwsan.com) * * This file is automatically generated from the OMAP hardware databases. * We respectfully ask that any modifications to this file be coordinated @@ -54,6 +54,7 @@ static struct powerdomain core_44xx_pwrdm = { [3] = PWRDM_POWER_ON, /* ducati_l2ram */ [4] = PWRDM_POWER_ON, /* ducati_unicache */ }, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, }; /* gfx_44xx_pwrdm: 3D accelerator power domain */ @@ -69,6 +70,7 @@ static struct powerdomain gfx_44xx_pwrdm = { .pwrsts_mem_on = { [0] = PWRDM_POWER_ON, /* gfx_mem */ }, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, }; /* abe_44xx_pwrdm: Audio back end power domain */ @@ -87,6 +89,7 @@ static struct powerdomain abe_44xx_pwrdm = { [0] = PWRDM_POWER_ON, /* aessmem */ [1] = PWRDM_POWER_ON, /* periphmem */ }, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, }; /* dss_44xx_pwrdm: Display subsystem power domain */ @@ -103,6 +106,7 @@ static struct powerdomain dss_44xx_pwrdm = { .pwrsts_mem_on = { [0] = PWRDM_POWER_ON, /* dss_mem */ }, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, }; /* tesla_44xx_pwrdm: Tesla processor power domain */ @@ -123,6 +127,7 @@ static struct powerdomain tesla_44xx_pwrdm = { [1] = PWRDM_POWER_ON, /* tesla_l1 */ [2] = PWRDM_POWER_ON, /* tesla_l2 */ }, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, }; /* wkup_44xx_pwrdm: Wake-up power domain */ @@ -130,7 +135,7 @@ static struct powerdomain wkup_44xx_pwrdm = { .name = "wkup_pwrdm", .prcm_offs = OMAP4430_PRM_WKUP_MOD, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), - .pwrsts = PWRDM_POWER_ON, + .pwrsts = PWRSTS_ON, .banks = 1, .pwrsts_mem_ret = { [0] = PWRDM_POWER_OFF, /* wkup_bank */ @@ -143,7 +148,7 @@ static struct powerdomain wkup_44xx_pwrdm = { /* cpu0_44xx_pwrdm: MPU0 processor and Neon coprocessor power domain */ static struct powerdomain cpu0_44xx_pwrdm = { .name = "cpu0_pwrdm", - .prcm_offs = OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, + .prcm_offs = OMAP4430_PRCM_MPU_CPU0_MOD, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, @@ -159,7 +164,7 @@ static struct powerdomain cpu0_44xx_pwrdm = { /* cpu1_44xx_pwrdm: MPU1 processor and Neon coprocessor power domain */ static struct powerdomain cpu1_44xx_pwrdm = { .name = "cpu1_pwrdm", - .prcm_offs = OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, + .prcm_offs = OMAP4430_PRCM_MPU_CPU1_MOD, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, @@ -227,6 +232,7 @@ static struct powerdomain ivahd_44xx_pwrdm = { [2] = PWRDM_POWER_ON, /* tcm1_mem */ [3] = PWRDM_POWER_ON, /* tcm2_mem */ }, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, }; /* cam_44xx_pwrdm: Camera subsystem power domain */ @@ -242,6 +248,7 @@ static struct powerdomain cam_44xx_pwrdm = { .pwrsts_mem_on = { [0] = PWRDM_POWER_ON, /* cam_mem */ }, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, }; /* l3init_44xx_pwrdm: L3 initators pheripherals power domain */ @@ -258,6 +265,7 @@ static struct powerdomain l3init_44xx_pwrdm = { .pwrsts_mem_on = { [0] = PWRDM_POWER_ON, /* l3init_bank1 */ }, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, }; /* l4per_44xx_pwrdm: Target peripherals power domain */ @@ -276,6 +284,7 @@ static struct powerdomain l4per_44xx_pwrdm = { [0] = PWRDM_POWER_ON, /* nonretained_bank */ [1] = PWRDM_POWER_ON, /* retained_bank */ }, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, }; /* @@ -286,7 +295,7 @@ static struct powerdomain always_on_core_44xx_pwrdm = { .name = "always_on_core_pwrdm", .prcm_offs = OMAP4430_PRM_ALWAYS_ON_MOD, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), - .pwrsts = PWRDM_POWER_ON, + .pwrsts = PWRSTS_ON, }; /* cefuse_44xx_pwrdm: Customer efuse controller power domain */ diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 90f603d434c6..995b7edbf18d 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -112,83 +112,75 @@ #define OMAP4430_SCRM_SCRM_MOD 0x0000 -/* CHIRONSS instances */ +/* PRCM_MPU instances */ -#define OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD 0x0000 -#define OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD 0x0200 -#define OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD 0x0400 -#define OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD 0x0800 - -/* Base Addresses for the OMAP4 */ - -#define OMAP4430_CM1_BASE 0x4a004000 -#define OMAP4430_CM2_BASE 0x4a008000 -#define OMAP4430_PRM_BASE 0x4a306000 -#define OMAP4430_SCRM_BASE 0x4a30a000 -#define OMAP4430_CHIRONSS_BASE 0x48243000 +#define OMAP4430_PRCM_MPU_OCP_SOCKET_PRCM_MOD 0x0000 +#define OMAP4430_PRCM_MPU_DEVICE_PRM_MOD 0x0200 +#define OMAP4430_PRCM_MPU_CPU0_MOD 0x0400 +#define OMAP4430_PRCM_MPU_CPU1_MOD 0x0800 /* 24XX register bits shared between CM & PRM registers */ /* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */ #define OMAP2420_EN_MMC_SHIFT 26 -#define OMAP2420_EN_MMC (1 << 26) +#define OMAP2420_EN_MMC_MASK (1 << 26) #define OMAP24XX_EN_UART2_SHIFT 22 -#define OMAP24XX_EN_UART2 (1 << 22) +#define OMAP24XX_EN_UART2_MASK (1 << 22) #define OMAP24XX_EN_UART1_SHIFT 21 -#define OMAP24XX_EN_UART1 (1 << 21) +#define OMAP24XX_EN_UART1_MASK (1 << 21) #define OMAP24XX_EN_MCSPI2_SHIFT 18 -#define OMAP24XX_EN_MCSPI2 (1 << 18) +#define OMAP24XX_EN_MCSPI2_MASK (1 << 18) #define OMAP24XX_EN_MCSPI1_SHIFT 17 -#define OMAP24XX_EN_MCSPI1 (1 << 17) +#define OMAP24XX_EN_MCSPI1_MASK (1 << 17) #define OMAP24XX_EN_MCBSP2_SHIFT 16 -#define OMAP24XX_EN_MCBSP2 (1 << 16) +#define OMAP24XX_EN_MCBSP2_MASK (1 << 16) #define OMAP24XX_EN_MCBSP1_SHIFT 15 -#define OMAP24XX_EN_MCBSP1 (1 << 15) +#define OMAP24XX_EN_MCBSP1_MASK (1 << 15) #define OMAP24XX_EN_GPT12_SHIFT 14 -#define OMAP24XX_EN_GPT12 (1 << 14) +#define OMAP24XX_EN_GPT12_MASK (1 << 14) #define OMAP24XX_EN_GPT11_SHIFT 13 -#define OMAP24XX_EN_GPT11 (1 << 13) +#define OMAP24XX_EN_GPT11_MASK (1 << 13) #define OMAP24XX_EN_GPT10_SHIFT 12 -#define OMAP24XX_EN_GPT10 (1 << 12) +#define OMAP24XX_EN_GPT10_MASK (1 << 12) #define OMAP24XX_EN_GPT9_SHIFT 11 -#define OMAP24XX_EN_GPT9 (1 << 11) +#define OMAP24XX_EN_GPT9_MASK (1 << 11) #define OMAP24XX_EN_GPT8_SHIFT 10 -#define OMAP24XX_EN_GPT8 (1 << 10) +#define OMAP24XX_EN_GPT8_MASK (1 << 10) #define OMAP24XX_EN_GPT7_SHIFT 9 -#define OMAP24XX_EN_GPT7 (1 << 9) +#define OMAP24XX_EN_GPT7_MASK (1 << 9) #define OMAP24XX_EN_GPT6_SHIFT 8 -#define OMAP24XX_EN_GPT6 (1 << 8) +#define OMAP24XX_EN_GPT6_MASK (1 << 8) #define OMAP24XX_EN_GPT5_SHIFT 7 -#define OMAP24XX_EN_GPT5 (1 << 7) +#define OMAP24XX_EN_GPT5_MASK (1 << 7) #define OMAP24XX_EN_GPT4_SHIFT 6 -#define OMAP24XX_EN_GPT4 (1 << 6) +#define OMAP24XX_EN_GPT4_MASK (1 << 6) #define OMAP24XX_EN_GPT3_SHIFT 5 -#define OMAP24XX_EN_GPT3 (1 << 5) +#define OMAP24XX_EN_GPT3_MASK (1 << 5) #define OMAP24XX_EN_GPT2_SHIFT 4 -#define OMAP24XX_EN_GPT2 (1 << 4) +#define OMAP24XX_EN_GPT2_MASK (1 << 4) #define OMAP2420_EN_VLYNQ_SHIFT 3 -#define OMAP2420_EN_VLYNQ (1 << 3) +#define OMAP2420_EN_VLYNQ_MASK (1 << 3) /* CM_FCLKEN2_CORE, CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */ #define OMAP2430_EN_GPIO5_SHIFT 10 -#define OMAP2430_EN_GPIO5 (1 << 10) +#define OMAP2430_EN_GPIO5_MASK (1 << 10) #define OMAP2430_EN_MCSPI3_SHIFT 9 -#define OMAP2430_EN_MCSPI3 (1 << 9) +#define OMAP2430_EN_MCSPI3_MASK (1 << 9) #define OMAP2430_EN_MMCHS2_SHIFT 8 -#define OMAP2430_EN_MMCHS2 (1 << 8) +#define OMAP2430_EN_MMCHS2_MASK (1 << 8) #define OMAP2430_EN_MMCHS1_SHIFT 7 -#define OMAP2430_EN_MMCHS1 (1 << 7) +#define OMAP2430_EN_MMCHS1_MASK (1 << 7) #define OMAP24XX_EN_UART3_SHIFT 2 -#define OMAP24XX_EN_UART3 (1 << 2) +#define OMAP24XX_EN_UART3_MASK (1 << 2) #define OMAP24XX_EN_USB_SHIFT 0 -#define OMAP24XX_EN_USB (1 << 0) +#define OMAP24XX_EN_USB_MASK (1 << 0) /* CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */ #define OMAP2430_EN_MDM_INTC_SHIFT 11 -#define OMAP2430_EN_MDM_INTC (1 << 11) +#define OMAP2430_EN_MDM_INTC_MASK (1 << 11) #define OMAP2430_EN_USBHS_SHIFT 6 -#define OMAP2430_EN_USBHS (1 << 6) +#define OMAP2430_EN_USBHS_MASK (1 << 6) /* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */ #define OMAP2420_ST_MMC_SHIFT 26 @@ -246,9 +238,9 @@ /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */ #define OMAP24XX_EN_GPIOS_SHIFT 2 -#define OMAP24XX_EN_GPIOS (1 << 2) +#define OMAP24XX_EN_GPIOS_MASK (1 << 2) #define OMAP24XX_EN_GPT1_SHIFT 0 -#define OMAP24XX_EN_GPT1 (1 << 0) +#define OMAP24XX_EN_GPT1_MASK (1 << 0) /* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */ #define OMAP24XX_ST_GPIOS_SHIFT (1 << 2) @@ -267,47 +259,47 @@ #define OMAP3430_REV_MASK (0xff << 0) /* CM_SYSCONFIG, PRM_SYSCONFIG shared bits */ -#define OMAP3430_AUTOIDLE (1 << 0) +#define OMAP3430_AUTOIDLE_MASK (1 << 0) /* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */ -#define OMAP3430_EN_MMC2 (1 << 25) +#define OMAP3430_EN_MMC2_MASK (1 << 25) #define OMAP3430_EN_MMC2_SHIFT 25 -#define OMAP3430_EN_MMC1 (1 << 24) +#define OMAP3430_EN_MMC1_MASK (1 << 24) #define OMAP3430_EN_MMC1_SHIFT 24 -#define OMAP3430_EN_MCSPI4 (1 << 21) +#define OMAP3430_EN_MCSPI4_MASK (1 << 21) #define OMAP3430_EN_MCSPI4_SHIFT 21 -#define OMAP3430_EN_MCSPI3 (1 << 20) +#define OMAP3430_EN_MCSPI3_MASK (1 << 20) #define OMAP3430_EN_MCSPI3_SHIFT 20 -#define OMAP3430_EN_MCSPI2 (1 << 19) +#define OMAP3430_EN_MCSPI2_MASK (1 << 19) #define OMAP3430_EN_MCSPI2_SHIFT 19 -#define OMAP3430_EN_MCSPI1 (1 << 18) +#define OMAP3430_EN_MCSPI1_MASK (1 << 18) #define OMAP3430_EN_MCSPI1_SHIFT 18 -#define OMAP3430_EN_I2C3 (1 << 17) +#define OMAP3430_EN_I2C3_MASK (1 << 17) #define OMAP3430_EN_I2C3_SHIFT 17 -#define OMAP3430_EN_I2C2 (1 << 16) +#define OMAP3430_EN_I2C2_MASK (1 << 16) #define OMAP3430_EN_I2C2_SHIFT 16 -#define OMAP3430_EN_I2C1 (1 << 15) +#define OMAP3430_EN_I2C1_MASK (1 << 15) #define OMAP3430_EN_I2C1_SHIFT 15 -#define OMAP3430_EN_UART2 (1 << 14) +#define OMAP3430_EN_UART2_MASK (1 << 14) #define OMAP3430_EN_UART2_SHIFT 14 -#define OMAP3430_EN_UART1 (1 << 13) +#define OMAP3430_EN_UART1_MASK (1 << 13) #define OMAP3430_EN_UART1_SHIFT 13 -#define OMAP3430_EN_GPT11 (1 << 12) +#define OMAP3430_EN_GPT11_MASK (1 << 12) #define OMAP3430_EN_GPT11_SHIFT 12 -#define OMAP3430_EN_GPT10 (1 << 11) +#define OMAP3430_EN_GPT10_MASK (1 << 11) #define OMAP3430_EN_GPT10_SHIFT 11 -#define OMAP3430_EN_MCBSP5 (1 << 10) +#define OMAP3430_EN_MCBSP5_MASK (1 << 10) #define OMAP3430_EN_MCBSP5_SHIFT 10 -#define OMAP3430_EN_MCBSP1 (1 << 9) +#define OMAP3430_EN_MCBSP1_MASK (1 << 9) #define OMAP3430_EN_MCBSP1_SHIFT 9 -#define OMAP3430_EN_FSHOSTUSB (1 << 5) +#define OMAP3430_EN_FSHOSTUSB_MASK (1 << 5) #define OMAP3430_EN_FSHOSTUSB_SHIFT 5 -#define OMAP3430_EN_D2D (1 << 3) +#define OMAP3430_EN_D2D_MASK (1 << 3) #define OMAP3430_EN_D2D_SHIFT 3 /* CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */ -#define OMAP3430_EN_HSOTGUSB (1 << 4) -#define OMAP3430_EN_HSOTGUSB_SHIFT 4 +#define OMAP3430_EN_HSOTGUSB_MASK (1 << 4) +#define OMAP3430_EN_HSOTGUSB_SHIFT 4 /* PM_WKST1_CORE, CM_IDLEST1_CORE shared bits */ #define OMAP3430_ST_MMC2_SHIFT 25 @@ -352,21 +344,21 @@ #define OMAP3430_ST_D2D_MASK (1 << 3) /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */ -#define OMAP3430_EN_GPIO1 (1 << 3) +#define OMAP3430_EN_GPIO1_MASK (1 << 3) #define OMAP3430_EN_GPIO1_SHIFT 3 -#define OMAP3430_EN_GPT12 (1 << 1) +#define OMAP3430_EN_GPT12_MASK (1 << 1) #define OMAP3430_EN_GPT12_SHIFT 1 -#define OMAP3430_EN_GPT1 (1 << 0) +#define OMAP3430_EN_GPT1_MASK (1 << 0) #define OMAP3430_EN_GPT1_SHIFT 0 /* CM_FCLKEN_WKUP, PM_WKEN_WKUP shared bits */ -#define OMAP3430_EN_SR2 (1 << 7) +#define OMAP3430_EN_SR2_MASK (1 << 7) #define OMAP3430_EN_SR2_SHIFT 7 -#define OMAP3430_EN_SR1 (1 << 6) +#define OMAP3430_EN_SR1_MASK (1 << 6) #define OMAP3430_EN_SR1_SHIFT 6 /* CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */ -#define OMAP3430_EN_GPT12 (1 << 1) +#define OMAP3430_EN_GPT12_MASK (1 << 1) #define OMAP3430_EN_GPT12_SHIFT 1 /* CM_IDLEST_WKUP, PM_WKST_WKUP shared bits */ @@ -386,47 +378,47 @@ * CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_GFX, * PM_WKDEP_DSS, PM_WKDEP_CAM, PM_WKDEP_PER, PM_WKDEP_NEON shared bits */ -#define OMAP3430_EN_MPU (1 << 1) +#define OMAP3430_EN_MPU_MASK (1 << 1) #define OMAP3430_EN_MPU_SHIFT 1 /* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER shared bits */ -#define OMAP3430_EN_GPIO6 (1 << 17) +#define OMAP3430_EN_GPIO6_MASK (1 << 17) #define OMAP3430_EN_GPIO6_SHIFT 17 -#define OMAP3430_EN_GPIO5 (1 << 16) +#define OMAP3430_EN_GPIO5_MASK (1 << 16) #define OMAP3430_EN_GPIO5_SHIFT 16 -#define OMAP3430_EN_GPIO4 (1 << 15) +#define OMAP3430_EN_GPIO4_MASK (1 << 15) #define OMAP3430_EN_GPIO4_SHIFT 15 -#define OMAP3430_EN_GPIO3 (1 << 14) +#define OMAP3430_EN_GPIO3_MASK (1 << 14) #define OMAP3430_EN_GPIO3_SHIFT 14 -#define OMAP3430_EN_GPIO2 (1 << 13) +#define OMAP3430_EN_GPIO2_MASK (1 << 13) #define OMAP3430_EN_GPIO2_SHIFT 13 -#define OMAP3430_EN_UART3 (1 << 11) +#define OMAP3430_EN_UART3_MASK (1 << 11) #define OMAP3430_EN_UART3_SHIFT 11 -#define OMAP3430_EN_GPT9 (1 << 10) +#define OMAP3430_EN_GPT9_MASK (1 << 10) #define OMAP3430_EN_GPT9_SHIFT 10 -#define OMAP3430_EN_GPT8 (1 << 9) +#define OMAP3430_EN_GPT8_MASK (1 << 9) #define OMAP3430_EN_GPT8_SHIFT 9 -#define OMAP3430_EN_GPT7 (1 << 8) +#define OMAP3430_EN_GPT7_MASK (1 << 8) #define OMAP3430_EN_GPT7_SHIFT 8 -#define OMAP3430_EN_GPT6 (1 << 7) +#define OMAP3430_EN_GPT6_MASK (1 << 7) #define OMAP3430_EN_GPT6_SHIFT 7 -#define OMAP3430_EN_GPT5 (1 << 6) +#define OMAP3430_EN_GPT5_MASK (1 << 6) #define OMAP3430_EN_GPT5_SHIFT 6 -#define OMAP3430_EN_GPT4 (1 << 5) +#define OMAP3430_EN_GPT4_MASK (1 << 5) #define OMAP3430_EN_GPT4_SHIFT 5 -#define OMAP3430_EN_GPT3 (1 << 4) +#define OMAP3430_EN_GPT3_MASK (1 << 4) #define OMAP3430_EN_GPT3_SHIFT 4 -#define OMAP3430_EN_GPT2 (1 << 3) +#define OMAP3430_EN_GPT2_MASK (1 << 3) #define OMAP3430_EN_GPT2_SHIFT 3 /* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER, PM_WKST_PER shared bits */ /* XXX Possible TI documentation bug: should the PM_WKST_PER EN_* bits * be ST_* bits instead? */ -#define OMAP3430_EN_MCBSP4 (1 << 2) +#define OMAP3430_EN_MCBSP4_MASK (1 << 2) #define OMAP3430_EN_MCBSP4_SHIFT 2 -#define OMAP3430_EN_MCBSP3 (1 << 1) +#define OMAP3430_EN_MCBSP3_MASK (1 << 1) #define OMAP3430_EN_MCBSP3_SHIFT 1 -#define OMAP3430_EN_MCBSP2 (1 << 0) +#define OMAP3430_EN_MCBSP2_MASK (1 << 0) #define OMAP3430_EN_MCBSP2_SHIFT 0 /* CM_IDLEST_PER, PM_WKST_PER shared bits */ diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 07a60f1204ca..c20137497c92 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -158,10 +158,10 @@ void omap_prcm_arch_reset(char mode, const char *cmd) WARN_ON(1); if (cpu_is_omap24xx() || cpu_is_omap34xx()) - prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs, + prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs, OMAP2_RM_RSTCTRL); if (cpu_is_omap44xx()) - prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs, + prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs, OMAP4_RM_RSTCTRL); } diff --git a/arch/arm/mach-omap2/prm-regbits-24xx.h b/arch/arm/mach-omap2/prm-regbits-24xx.h index 4002051c20b9..0b188ffa710e 100644 --- a/arch/arm/mach-omap2/prm-regbits-24xx.h +++ b/arch/arm/mach-omap2/prm-regbits-24xx.h @@ -19,14 +19,14 @@ /* Bits shared between registers */ /* PRCM_IRQSTATUS_MPU, PM_IRQSTATUS_DSP, PRCM_IRQSTATUS_IVA shared bits */ -#define OMAP24XX_VOLTTRANS_ST (1 << 2) -#define OMAP24XX_WKUP2_ST (1 << 1) -#define OMAP24XX_WKUP1_ST (1 << 0) +#define OMAP24XX_VOLTTRANS_ST_MASK (1 << 2) +#define OMAP24XX_WKUP2_ST_MASK (1 << 1) +#define OMAP24XX_WKUP1_ST_MASK (1 << 0) /* PRCM_IRQENABLE_MPU, PM_IRQENABLE_DSP, PRCM_IRQENABLE_IVA shared bits */ -#define OMAP24XX_VOLTTRANS_EN (1 << 2) -#define OMAP24XX_WKUP2_EN (1 << 1) -#define OMAP24XX_WKUP1_EN (1 << 0) +#define OMAP24XX_VOLTTRANS_EN_MASK (1 << 2) +#define OMAP24XX_WKUP2_EN_MASK (1 << 1) +#define OMAP24XX_WKUP1_EN_MASK (1 << 0) /* PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_DSP, PM_WKDEP_MDM shared bits */ #define OMAP24XX_EN_MPU_SHIFT 1 @@ -40,16 +40,16 @@ */ #define OMAP24XX_MEMONSTATE_SHIFT 10 #define OMAP24XX_MEMONSTATE_MASK (0x3 << 10) -#define OMAP24XX_MEMRETSTATE (1 << 3) +#define OMAP24XX_MEMRETSTATE_MASK (1 << 3) /* PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM shared bits */ -#define OMAP24XX_FORCESTATE (1 << 18) +#define OMAP24XX_FORCESTATE_MASK (1 << 18) /* * PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP, * PM_PWSTST_MDM shared bits */ -#define OMAP24XX_CLKACTIVITY (1 << 19) +#define OMAP24XX_CLKACTIVITY_MASK (1 << 19) /* PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_DSP shared bits */ #define OMAP24XX_LASTSTATEENTERED_SHIFT 4 @@ -71,26 +71,26 @@ #define OMAP24XX_REV_MASK (0xff << 0) /* PRCM_SYSCONFIG */ -#define OMAP24XX_AUTOIDLE (1 << 0) +#define OMAP24XX_AUTOIDLE_MASK (1 << 0) /* PRCM_IRQSTATUS_MPU specific bits */ -#define OMAP2430_DPLL_RECAL_ST (1 << 6) -#define OMAP24XX_TRANSITION_ST (1 << 5) -#define OMAP24XX_EVGENOFF_ST (1 << 4) -#define OMAP24XX_EVGENON_ST (1 << 3) +#define OMAP2430_DPLL_RECAL_ST_MASK (1 << 6) +#define OMAP24XX_TRANSITION_ST_MASK (1 << 5) +#define OMAP24XX_EVGENOFF_ST_MASK (1 << 4) +#define OMAP24XX_EVGENON_ST_MASK (1 << 3) /* PRCM_IRQENABLE_MPU specific bits */ -#define OMAP2430_DPLL_RECAL_EN (1 << 6) -#define OMAP24XX_TRANSITION_EN (1 << 5) -#define OMAP24XX_EVGENOFF_EN (1 << 4) -#define OMAP24XX_EVGENON_EN (1 << 3) +#define OMAP2430_DPLL_RECAL_EN_MASK (1 << 6) +#define OMAP24XX_TRANSITION_EN_MASK (1 << 5) +#define OMAP24XX_EVGENOFF_EN_MASK (1 << 4) +#define OMAP24XX_EVGENON_EN_MASK (1 << 3) /* PRCM_VOLTCTRL */ -#define OMAP24XX_AUTO_EXTVOLT (1 << 15) -#define OMAP24XX_FORCE_EXTVOLT (1 << 14) +#define OMAP24XX_AUTO_EXTVOLT_MASK (1 << 15) +#define OMAP24XX_FORCE_EXTVOLT_MASK (1 << 14) #define OMAP24XX_SETOFF_LEVEL_SHIFT 12 #define OMAP24XX_SETOFF_LEVEL_MASK (0x3 << 12) -#define OMAP24XX_MEMRETCTRL (1 << 8) +#define OMAP24XX_MEMRETCTRL_MASK (1 << 8) #define OMAP24XX_SETRET_LEVEL_SHIFT 6 #define OMAP24XX_SETRET_LEVEL_MASK (0x3 << 6) #define OMAP24XX_VOLT_LEVEL_SHIFT 0 @@ -104,13 +104,13 @@ /* PRCM_CLKOUT_CTRL */ #define OMAP2420_CLKOUT2_EN_SHIFT 15 -#define OMAP2420_CLKOUT2_EN (1 << 15) +#define OMAP2420_CLKOUT2_EN_MASK (1 << 15) #define OMAP2420_CLKOUT2_DIV_SHIFT 11 #define OMAP2420_CLKOUT2_DIV_MASK (0x7 << 11) #define OMAP2420_CLKOUT2_SOURCE_SHIFT 8 #define OMAP2420_CLKOUT2_SOURCE_MASK (0x3 << 8) #define OMAP24XX_CLKOUT_EN_SHIFT 7 -#define OMAP24XX_CLKOUT_EN (1 << 7) +#define OMAP24XX_CLKOUT_EN_MASK (1 << 7) #define OMAP24XX_CLKOUT_DIV_SHIFT 3 #define OMAP24XX_CLKOUT_DIV_MASK (0x7 << 3) #define OMAP24XX_CLKOUT_SOURCE_SHIFT 0 @@ -118,25 +118,25 @@ /* PRCM_CLKEMUL_CTRL */ #define OMAP24XX_EMULATION_EN_SHIFT 0 -#define OMAP24XX_EMULATION_EN (1 << 0) +#define OMAP24XX_EMULATION_EN_MASK (1 << 0) /* PRCM_CLKCFG_CTRL */ -#define OMAP24XX_VALID_CONFIG (1 << 0) +#define OMAP24XX_VALID_CONFIG_MASK (1 << 0) /* PRCM_CLKCFG_STATUS */ -#define OMAP24XX_CONFIG_STATUS (1 << 0) +#define OMAP24XX_CONFIG_STATUS_MASK (1 << 0) /* PRCM_VOLTSETUP specific bits */ /* PRCM_CLKSSETUP specific bits */ /* PRCM_POLCTRL */ -#define OMAP2420_CLKOUT2_POL (1 << 10) -#define OMAP24XX_CLKOUT_POL (1 << 9) -#define OMAP24XX_CLKREQ_POL (1 << 8) -#define OMAP2430_USE_POWEROK (1 << 2) -#define OMAP2430_POWEROK_POL (1 << 1) -#define OMAP24XX_EXTVOL_POL (1 << 0) +#define OMAP2420_CLKOUT2_POL_MASK (1 << 10) +#define OMAP24XX_CLKOUT_POL_MASK (1 << 9) +#define OMAP24XX_CLKREQ_POL_MASK (1 << 8) +#define OMAP2430_USE_POWEROK_MASK (1 << 2) +#define OMAP2430_POWEROK_POL_MASK (1 << 1) +#define OMAP24XX_EXTVOL_POL_MASK (1 << 0) /* RM_RSTST_MPU specific bits */ /* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" instead */ @@ -154,7 +154,7 @@ /* PM_EVEGENOFFTIM_MPU specific bits */ /* PM_PWSTCTRL_MPU specific bits */ -#define OMAP2430_FORCESTATE (1 << 18) +#define OMAP2430_FORCESTATE_MASK (1 << 18) /* PM_PWSTST_MPU specific bits */ /* INTRANSITION, CLKACTIVITY, POWERSTATE, MEMSTATEST are 2430 only */ @@ -168,21 +168,21 @@ /* PM_WKST2_CORE specific bits */ /* PM_WKDEP_CORE specific bits*/ -#define OMAP2430_PM_WKDEP_CORE_EN_MDM (1 << 5) -#define OMAP24XX_PM_WKDEP_CORE_EN_GFX (1 << 3) -#define OMAP24XX_PM_WKDEP_CORE_EN_DSP (1 << 2) +#define OMAP2430_PM_WKDEP_CORE_EN_MDM_MASK (1 << 5) +#define OMAP24XX_PM_WKDEP_CORE_EN_GFX_MASK (1 << 3) +#define OMAP24XX_PM_WKDEP_CORE_EN_DSP_MASK (1 << 2) /* PM_PWSTCTRL_CORE specific bits */ -#define OMAP24XX_MEMORYCHANGE (1 << 20) +#define OMAP24XX_MEMORYCHANGE_MASK (1 << 20) #define OMAP24XX_MEM3ONSTATE_SHIFT 14 #define OMAP24XX_MEM3ONSTATE_MASK (0x3 << 14) #define OMAP24XX_MEM2ONSTATE_SHIFT 12 #define OMAP24XX_MEM2ONSTATE_MASK (0x3 << 12) #define OMAP24XX_MEM1ONSTATE_SHIFT 10 #define OMAP24XX_MEM1ONSTATE_MASK (0x3 << 10) -#define OMAP24XX_MEM3RETSTATE (1 << 5) -#define OMAP24XX_MEM2RETSTATE (1 << 4) -#define OMAP24XX_MEM1RETSTATE (1 << 3) +#define OMAP24XX_MEM3RETSTATE_MASK (1 << 5) +#define OMAP24XX_MEM2RETSTATE_MASK (1 << 4) +#define OMAP24XX_MEM1RETSTATE_MASK (1 << 3) /* PM_PWSTST_CORE specific bits */ #define OMAP24XX_MEM3STATEST_SHIFT 14 @@ -193,10 +193,10 @@ #define OMAP24XX_MEM1STATEST_MASK (0x3 << 10) /* RM_RSTCTRL_GFX */ -#define OMAP24XX_GFX_RST (1 << 0) +#define OMAP24XX_GFX_RST_MASK (1 << 0) /* RM_RSTST_GFX specific bits */ -#define OMAP24XX_GFX_SW_RST (1 << 4) +#define OMAP24XX_GFX_SW_RST_MASK (1 << 4) /* PM_PWSTCTRL_GFX specific bits */ @@ -209,25 +209,25 @@ /* RM_RSTST_WKUP specific bits */ /* 2430 calls EXTWMPU_RST "EXTWARM_RST" and GLOBALWMPU_RST "GLOBALWARM_RST" */ -#define OMAP24XX_EXTWMPU_RST (1 << 6) -#define OMAP24XX_SECU_WD_RST (1 << 5) -#define OMAP24XX_MPU_WD_RST (1 << 4) -#define OMAP24XX_SECU_VIOL_RST (1 << 3) +#define OMAP24XX_EXTWMPU_RST_MASK (1 << 6) +#define OMAP24XX_SECU_WD_RST_MASK (1 << 5) +#define OMAP24XX_MPU_WD_RST_MASK (1 << 4) +#define OMAP24XX_SECU_VIOL_RST_MASK (1 << 3) /* PM_WKEN_WKUP specific bits */ /* PM_WKST_WKUP specific bits */ /* RM_RSTCTRL_DSP */ -#define OMAP2420_RST_IVA (1 << 8) -#define OMAP24XX_RST2_DSP (1 << 1) -#define OMAP24XX_RST1_DSP (1 << 0) +#define OMAP2420_RST_IVA_MASK (1 << 8) +#define OMAP24XX_RST2_DSP_MASK (1 << 1) +#define OMAP24XX_RST1_DSP_MASK (1 << 0) /* RM_RSTST_DSP specific bits */ /* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" */ -#define OMAP2420_IVA_SW_RST (1 << 8) -#define OMAP24XX_DSP_SW_RST2 (1 << 5) -#define OMAP24XX_DSP_SW_RST1 (1 << 4) +#define OMAP2420_IVA_SW_RST_MASK (1 << 8) +#define OMAP24XX_DSP_SW_RST2_MASK (1 << 5) +#define OMAP24XX_DSP_SW_RST1_MASK (1 << 4) /* PM_WKDEP_DSP specific bits */ @@ -235,7 +235,7 @@ /* 2430 only: MEMONSTATE, MEMRETSTATE */ #define OMAP2420_MEMIONSTATE_SHIFT 12 #define OMAP2420_MEMIONSTATE_MASK (0x3 << 12) -#define OMAP2420_MEMIRETSTATE (1 << 4) +#define OMAP2420_MEMIRETSTATE_MASK (1 << 4) /* PM_PWSTST_DSP specific bits */ /* MEMSTATEST is 2430 only */ @@ -248,18 +248,18 @@ /* RM_RSTCTRL_MDM */ /* 2430 only */ -#define OMAP2430_PWRON1_MDM (1 << 1) -#define OMAP2430_RST1_MDM (1 << 0) +#define OMAP2430_PWRON1_MDM_MASK (1 << 1) +#define OMAP2430_RST1_MDM_MASK (1 << 0) /* RM_RSTST_MDM specific bits */ /* 2430 only */ -#define OMAP2430_MDM_SECU_VIOL (1 << 6) -#define OMAP2430_MDM_SW_PWRON1 (1 << 5) -#define OMAP2430_MDM_SW_RST1 (1 << 4) +#define OMAP2430_MDM_SECU_VIOL_MASK (1 << 6) +#define OMAP2430_MDM_SW_PWRON1_MASK (1 << 5) +#define OMAP2430_MDM_SW_RST1_MASK (1 << 4) /* PM_WKEN_MDM */ /* 2430 only */ -#define OMAP2430_PM_WKEN_MDM_EN_MDM (1 << 0) +#define OMAP2430_PM_WKEN_MDM_EN_MDM_MASK (1 << 0) /* PM_WKST_MDM specific bits */ /* 2430 only */ @@ -269,7 +269,7 @@ /* PM_PWSTCTRL_MDM specific bits */ /* 2430 only */ -#define OMAP2430_KILLDOMAINWKUP (1 << 19) +#define OMAP2430_KILLDOMAINWKUP_MASK (1 << 19) /* PM_PWSTST_MDM specific bits */ /* 2430 only */ diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index 8f21bae6dc1c..7fd6023edf96 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -35,10 +35,10 @@ #define OMAP3430_ERRORGAIN_MASK (0xff << 16) #define OMAP3430_INITVOLTAGE_SHIFT 8 #define OMAP3430_INITVOLTAGE_MASK (0xff << 8) -#define OMAP3430_TIMEOUTEN (1 << 3) -#define OMAP3430_INITVDD (1 << 2) -#define OMAP3430_FORCEUPDATE (1 << 1) -#define OMAP3430_VPENABLE (1 << 0) +#define OMAP3430_TIMEOUTEN_MASK (1 << 3) +#define OMAP3430_INITVDD_MASK (1 << 2) +#define OMAP3430_FORCEUPDATE_MASK (1 << 1) +#define OMAP3430_VPENABLE_MASK (1 << 0) /* PRM_VP1_VSTEPMIN, PRM_VP2_VSTEPMIN shared bits */ #define OMAP3430_SMPSWAITTIMEMIN_SHIFT 8 @@ -65,53 +65,53 @@ #define OMAP3430_VPVOLTAGE_MASK (0xff << 0) /* PRM_VP1_STATUS, PRM_VP2_STATUS shared bits */ -#define OMAP3430_VPINIDLE (1 << 0) +#define OMAP3430_VPINIDLE_MASK (1 << 0) /* PM_WKDEP_IVA2, PM_WKDEP_MPU shared bits */ #define OMAP3430_EN_PER_SHIFT 7 #define OMAP3430_EN_PER_MASK (1 << 7) /* PM_PWSTCTRL_IVA2, PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE shared bits */ -#define OMAP3430_MEMORYCHANGE (1 << 3) +#define OMAP3430_MEMORYCHANGE_MASK (1 << 3) /* PM_PWSTST_IVA2, PM_PWSTST_CORE shared bits */ -#define OMAP3430_LOGICSTATEST (1 << 2) +#define OMAP3430_LOGICSTATEST_MASK (1 << 2) /* PM_PREPWSTST_IVA2, PM_PREPWSTST_CORE shared bits */ -#define OMAP3430_LASTLOGICSTATEENTERED (1 << 2) +#define OMAP3430_LASTLOGICSTATEENTERED_MASK (1 << 2) /* * PM_PREPWSTST_IVA2, PM_PREPWSTST_MPU, PM_PREPWSTST_CORE, * PM_PREPWSTST_GFX, PM_PREPWSTST_DSS, PM_PREPWSTST_CAM, * PM_PREPWSTST_PER, PM_PREPWSTST_NEON shared bits */ -#define OMAP3430_LASTPOWERSTATEENTERED_SHIFT 0 -#define OMAP3430_LASTPOWERSTATEENTERED_MASK (0x3 << 0) +#define OMAP3430_LASTPOWERSTATEENTERED_SHIFT 0 +#define OMAP3430_LASTPOWERSTATEENTERED_MASK (0x3 << 0) /* PRM_IRQSTATUS_IVA2, PRM_IRQSTATUS_MPU shared bits */ -#define OMAP3430_WKUP_ST (1 << 0) +#define OMAP3430_WKUP_ST_MASK (1 << 0) /* PRM_IRQENABLE_IVA2, PRM_IRQENABLE_MPU shared bits */ -#define OMAP3430_WKUP_EN (1 << 0) +#define OMAP3430_WKUP_EN_MASK (1 << 0) /* PM_MPUGRPSEL1_CORE, PM_IVA2GRPSEL1_CORE shared bits */ -#define OMAP3430_GRPSEL_MMC2 (1 << 25) -#define OMAP3430_GRPSEL_MMC1 (1 << 24) -#define OMAP3430_GRPSEL_MCSPI4 (1 << 21) -#define OMAP3430_GRPSEL_MCSPI3 (1 << 20) -#define OMAP3430_GRPSEL_MCSPI2 (1 << 19) -#define OMAP3430_GRPSEL_MCSPI1 (1 << 18) -#define OMAP3430_GRPSEL_I2C3 (1 << 17) -#define OMAP3430_GRPSEL_I2C2 (1 << 16) -#define OMAP3430_GRPSEL_I2C1 (1 << 15) -#define OMAP3430_GRPSEL_UART2 (1 << 14) -#define OMAP3430_GRPSEL_UART1 (1 << 13) -#define OMAP3430_GRPSEL_GPT11 (1 << 12) -#define OMAP3430_GRPSEL_GPT10 (1 << 11) -#define OMAP3430_GRPSEL_MCBSP5 (1 << 10) -#define OMAP3430_GRPSEL_MCBSP1 (1 << 9) -#define OMAP3430_GRPSEL_HSOTGUSB (1 << 4) -#define OMAP3430_GRPSEL_D2D (1 << 3) +#define OMAP3430_GRPSEL_MMC2_MASK (1 << 25) +#define OMAP3430_GRPSEL_MMC1_MASK (1 << 24) +#define OMAP3430_GRPSEL_MCSPI4_MASK (1 << 21) +#define OMAP3430_GRPSEL_MCSPI3_MASK (1 << 20) +#define OMAP3430_GRPSEL_MCSPI2_MASK (1 << 19) +#define OMAP3430_GRPSEL_MCSPI1_MASK (1 << 18) +#define OMAP3430_GRPSEL_I2C3_MASK (1 << 17) +#define OMAP3430_GRPSEL_I2C2_MASK (1 << 16) +#define OMAP3430_GRPSEL_I2C1_MASK (1 << 15) +#define OMAP3430_GRPSEL_UART2_MASK (1 << 14) +#define OMAP3430_GRPSEL_UART1_MASK (1 << 13) +#define OMAP3430_GRPSEL_GPT11_MASK (1 << 12) +#define OMAP3430_GRPSEL_GPT10_MASK (1 << 11) +#define OMAP3430_GRPSEL_MCBSP5_MASK (1 << 10) +#define OMAP3430_GRPSEL_MCBSP1_MASK (1 << 9) +#define OMAP3430_GRPSEL_HSOTGUSB_MASK (1 << 4) +#define OMAP3430_GRPSEL_D2D_MASK (1 << 3) /* * PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, @@ -119,49 +119,49 @@ */ #define OMAP3430_MEMONSTATE_SHIFT 16 #define OMAP3430_MEMONSTATE_MASK (0x3 << 16) -#define OMAP3430_MEMRETSTATE (1 << 8) +#define OMAP3430_MEMRETSTATE_MASK (1 << 8) /* PM_MPUGRPSEL_PER, PM_IVA2GRPSEL_PER shared bits */ -#define OMAP3430_GRPSEL_GPIO6 (1 << 17) -#define OMAP3430_GRPSEL_GPIO5 (1 << 16) -#define OMAP3430_GRPSEL_GPIO4 (1 << 15) -#define OMAP3430_GRPSEL_GPIO3 (1 << 14) -#define OMAP3430_GRPSEL_GPIO2 (1 << 13) -#define OMAP3430_GRPSEL_UART3 (1 << 11) -#define OMAP3430_GRPSEL_GPT9 (1 << 10) -#define OMAP3430_GRPSEL_GPT8 (1 << 9) -#define OMAP3430_GRPSEL_GPT7 (1 << 8) -#define OMAP3430_GRPSEL_GPT6 (1 << 7) -#define OMAP3430_GRPSEL_GPT5 (1 << 6) -#define OMAP3430_GRPSEL_GPT4 (1 << 5) -#define OMAP3430_GRPSEL_GPT3 (1 << 4) -#define OMAP3430_GRPSEL_GPT2 (1 << 3) -#define OMAP3430_GRPSEL_MCBSP4 (1 << 2) -#define OMAP3430_GRPSEL_MCBSP3 (1 << 1) -#define OMAP3430_GRPSEL_MCBSP2 (1 << 0) +#define OMAP3430_GRPSEL_GPIO6_MASK (1 << 17) +#define OMAP3430_GRPSEL_GPIO5_MASK (1 << 16) +#define OMAP3430_GRPSEL_GPIO4_MASK (1 << 15) +#define OMAP3430_GRPSEL_GPIO3_MASK (1 << 14) +#define OMAP3430_GRPSEL_GPIO2_MASK (1 << 13) +#define OMAP3430_GRPSEL_UART3_MASK (1 << 11) +#define OMAP3430_GRPSEL_GPT9_MASK (1 << 10) +#define OMAP3430_GRPSEL_GPT8_MASK (1 << 9) +#define OMAP3430_GRPSEL_GPT7_MASK (1 << 8) +#define OMAP3430_GRPSEL_GPT6_MASK (1 << 7) +#define OMAP3430_GRPSEL_GPT5_MASK (1 << 6) +#define OMAP3430_GRPSEL_GPT4_MASK (1 << 5) +#define OMAP3430_GRPSEL_GPT3_MASK (1 << 4) +#define OMAP3430_GRPSEL_GPT2_MASK (1 << 3) +#define OMAP3430_GRPSEL_MCBSP4_MASK (1 << 2) +#define OMAP3430_GRPSEL_MCBSP3_MASK (1 << 1) +#define OMAP3430_GRPSEL_MCBSP2_MASK (1 << 0) /* PM_MPUGRPSEL_WKUP, PM_IVA2GRPSEL_WKUP shared bits */ -#define OMAP3430_GRPSEL_IO (1 << 8) -#define OMAP3430_GRPSEL_SR2 (1 << 7) -#define OMAP3430_GRPSEL_SR1 (1 << 6) -#define OMAP3430_GRPSEL_GPIO1 (1 << 3) -#define OMAP3430_GRPSEL_GPT12 (1 << 1) -#define OMAP3430_GRPSEL_GPT1 (1 << 0) +#define OMAP3430_GRPSEL_IO_MASK (1 << 8) +#define OMAP3430_GRPSEL_SR2_MASK (1 << 7) +#define OMAP3430_GRPSEL_SR1_MASK (1 << 6) +#define OMAP3430_GRPSEL_GPIO1_MASK (1 << 3) +#define OMAP3430_GRPSEL_GPT12_MASK (1 << 1) +#define OMAP3430_GRPSEL_GPT1_MASK (1 << 0) /* Bits specific to each register */ /* RM_RSTCTRL_IVA2 */ -#define OMAP3430_RST3_IVA2 (1 << 2) -#define OMAP3430_RST2_IVA2 (1 << 1) -#define OMAP3430_RST1_IVA2 (1 << 0) +#define OMAP3430_RST3_IVA2_MASK (1 << 2) +#define OMAP3430_RST2_IVA2_MASK (1 << 1) +#define OMAP3430_RST1_IVA2_MASK (1 << 0) /* RM_RSTST_IVA2 specific bits */ -#define OMAP3430_EMULATION_VSEQ_RST (1 << 13) -#define OMAP3430_EMULATION_VHWA_RST (1 << 12) -#define OMAP3430_EMULATION_IVA2_RST (1 << 11) -#define OMAP3430_IVA2_SW_RST3 (1 << 10) -#define OMAP3430_IVA2_SW_RST2 (1 << 9) -#define OMAP3430_IVA2_SW_RST1 (1 << 8) +#define OMAP3430_EMULATION_VSEQ_RST_MASK (1 << 13) +#define OMAP3430_EMULATION_VHWA_RST_MASK (1 << 12) +#define OMAP3430_EMULATION_IVA2_RST_MASK (1 << 11) +#define OMAP3430_IVA2_SW_RST3_MASK (1 << 10) +#define OMAP3430_IVA2_SW_RST2_MASK (1 << 9) +#define OMAP3430_IVA2_SW_RST1_MASK (1 << 8) /* PM_WKDEP_IVA2 specific bits */ @@ -174,10 +174,10 @@ #define OMAP3430_L1FLATMEMONSTATE_MASK (0x3 << 18) #define OMAP3430_SHAREDL1CACHEFLATONSTATE_SHIFT 16 #define OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK (0x3 << 16) -#define OMAP3430_L2FLATMEMRETSTATE (1 << 11) -#define OMAP3430_SHAREDL2CACHEFLATRETSTATE (1 << 10) -#define OMAP3430_L1FLATMEMRETSTATE (1 << 9) -#define OMAP3430_SHAREDL1CACHEFLATRETSTATE (1 << 8) +#define OMAP3430_L2FLATMEMRETSTATE_MASK (1 << 11) +#define OMAP3430_SHAREDL2CACHEFLATRETSTATE_MASK (1 << 10) +#define OMAP3430_L1FLATMEMRETSTATE_MASK (1 << 9) +#define OMAP3430_SHAREDL1CACHEFLATRETSTATE_MASK (1 << 8) /* PM_PWSTST_IVA2 specific bits */ #define OMAP3430_L2FLATMEMSTATEST_SHIFT 10 @@ -200,12 +200,12 @@ #define OMAP3430_LASTSHAREDL1CACHEFLATSTATEENTERED_MASK (0x3 << 4) /* PRM_IRQSTATUS_IVA2 specific bits */ -#define OMAP3430_PRM_IRQSTATUS_IVA2_IVA2_DPLL_ST (1 << 2) -#define OMAP3430_FORCEWKUP_ST (1 << 1) +#define OMAP3430_PRM_IRQSTATUS_IVA2_IVA2_DPLL_ST_MASK (1 << 2) +#define OMAP3430_FORCEWKUP_ST_MASK (1 << 1) /* PRM_IRQENABLE_IVA2 specific bits */ -#define OMAP3430_PRM_IRQENABLE_IVA2_IVA2_DPLL_RECAL_EN (1 << 2) -#define OMAP3430_FORCEWKUP_EN (1 << 1) +#define OMAP3430_PRM_IRQENABLE_IVA2_IVA2_DPLL_RECAL_EN_MASK (1 << 2) +#define OMAP3430_FORCEWKUP_EN_MASK (1 << 1) /* PRM_REVISION specific bits */ @@ -213,70 +213,70 @@ /* PRM_IRQSTATUS_MPU specific bits */ #define OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT 25 -#define OMAP3430ES2_SND_PERIPH_DPLL_ST (1 << 25) -#define OMAP3430_VC_TIMEOUTERR_ST (1 << 24) -#define OMAP3430_VC_RAERR_ST (1 << 23) -#define OMAP3430_VC_SAERR_ST (1 << 22) -#define OMAP3430_VP2_TRANXDONE_ST (1 << 21) -#define OMAP3430_VP2_EQVALUE_ST (1 << 20) -#define OMAP3430_VP2_NOSMPSACK_ST (1 << 19) -#define OMAP3430_VP2_MAXVDD_ST (1 << 18) -#define OMAP3430_VP2_MINVDD_ST (1 << 17) -#define OMAP3430_VP2_OPPCHANGEDONE_ST (1 << 16) -#define OMAP3430_VP1_TRANXDONE_ST (1 << 15) -#define OMAP3430_VP1_EQVALUE_ST (1 << 14) -#define OMAP3430_VP1_NOSMPSACK_ST (1 << 13) -#define OMAP3430_VP1_MAXVDD_ST (1 << 12) -#define OMAP3430_VP1_MINVDD_ST (1 << 11) -#define OMAP3430_VP1_OPPCHANGEDONE_ST (1 << 10) -#define OMAP3430_IO_ST (1 << 9) -#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST (1 << 8) +#define OMAP3430ES2_SND_PERIPH_DPLL_ST_MASK (1 << 25) +#define OMAP3430_VC_TIMEOUTERR_ST_MASK (1 << 24) +#define OMAP3430_VC_RAERR_ST_MASK (1 << 23) +#define OMAP3430_VC_SAERR_ST_MASK (1 << 22) +#define OMAP3430_VP2_TRANXDONE_ST_MASK (1 << 21) +#define OMAP3430_VP2_EQVALUE_ST_MASK (1 << 20) +#define OMAP3430_VP2_NOSMPSACK_ST_MASK (1 << 19) +#define OMAP3430_VP2_MAXVDD_ST_MASK (1 << 18) +#define OMAP3430_VP2_MINVDD_ST_MASK (1 << 17) +#define OMAP3430_VP2_OPPCHANGEDONE_ST_MASK (1 << 16) +#define OMAP3430_VP1_TRANXDONE_ST_MASK (1 << 15) +#define OMAP3430_VP1_EQVALUE_ST_MASK (1 << 14) +#define OMAP3430_VP1_NOSMPSACK_ST_MASK (1 << 13) +#define OMAP3430_VP1_MAXVDD_ST_MASK (1 << 12) +#define OMAP3430_VP1_MINVDD_ST_MASK (1 << 11) +#define OMAP3430_VP1_OPPCHANGEDONE_ST_MASK (1 << 10) +#define OMAP3430_IO_ST_MASK (1 << 9) +#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_MASK (1 << 8) #define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT 8 -#define OMAP3430_MPU_DPLL_ST (1 << 7) +#define OMAP3430_MPU_DPLL_ST_MASK (1 << 7) #define OMAP3430_MPU_DPLL_ST_SHIFT 7 -#define OMAP3430_PERIPH_DPLL_ST (1 << 6) +#define OMAP3430_PERIPH_DPLL_ST_MASK (1 << 6) #define OMAP3430_PERIPH_DPLL_ST_SHIFT 6 -#define OMAP3430_CORE_DPLL_ST (1 << 5) +#define OMAP3430_CORE_DPLL_ST_MASK (1 << 5) #define OMAP3430_CORE_DPLL_ST_SHIFT 5 -#define OMAP3430_TRANSITION_ST (1 << 4) -#define OMAP3430_EVGENOFF_ST (1 << 3) -#define OMAP3430_EVGENON_ST (1 << 2) -#define OMAP3430_FS_USB_WKUP_ST (1 << 1) +#define OMAP3430_TRANSITION_ST_MASK (1 << 4) +#define OMAP3430_EVGENOFF_ST_MASK (1 << 3) +#define OMAP3430_EVGENON_ST_MASK (1 << 2) +#define OMAP3430_FS_USB_WKUP_ST_MASK (1 << 1) /* PRM_IRQENABLE_MPU specific bits */ #define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT 25 -#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN (1 << 25) -#define OMAP3430_VC_TIMEOUTERR_EN (1 << 24) -#define OMAP3430_VC_RAERR_EN (1 << 23) -#define OMAP3430_VC_SAERR_EN (1 << 22) -#define OMAP3430_VP2_TRANXDONE_EN (1 << 21) -#define OMAP3430_VP2_EQVALUE_EN (1 << 20) -#define OMAP3430_VP2_NOSMPSACK_EN (1 << 19) -#define OMAP3430_VP2_MAXVDD_EN (1 << 18) -#define OMAP3430_VP2_MINVDD_EN (1 << 17) -#define OMAP3430_VP2_OPPCHANGEDONE_EN (1 << 16) -#define OMAP3430_VP1_TRANXDONE_EN (1 << 15) -#define OMAP3430_VP1_EQVALUE_EN (1 << 14) -#define OMAP3430_VP1_NOSMPSACK_EN (1 << 13) -#define OMAP3430_VP1_MAXVDD_EN (1 << 12) -#define OMAP3430_VP1_MINVDD_EN (1 << 11) -#define OMAP3430_VP1_OPPCHANGEDONE_EN (1 << 10) -#define OMAP3430_IO_EN (1 << 9) -#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN (1 << 8) +#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_MASK (1 << 25) +#define OMAP3430_VC_TIMEOUTERR_EN_MASK (1 << 24) +#define OMAP3430_VC_RAERR_EN_MASK (1 << 23) +#define OMAP3430_VC_SAERR_EN_MASK (1 << 22) +#define OMAP3430_VP2_TRANXDONE_EN_MASK (1 << 21) +#define OMAP3430_VP2_EQVALUE_EN_MASK (1 << 20) +#define OMAP3430_VP2_NOSMPSACK_EN_MASK (1 << 19) +#define OMAP3430_VP2_MAXVDD_EN_MASK (1 << 18) +#define OMAP3430_VP2_MINVDD_EN_MASK (1 << 17) +#define OMAP3430_VP2_OPPCHANGEDONE_EN_MASK (1 << 16) +#define OMAP3430_VP1_TRANXDONE_EN_MASK (1 << 15) +#define OMAP3430_VP1_EQVALUE_EN_MASK (1 << 14) +#define OMAP3430_VP1_NOSMPSACK_EN_MASK (1 << 13) +#define OMAP3430_VP1_MAXVDD_EN_MASK (1 << 12) +#define OMAP3430_VP1_MINVDD_EN_MASK (1 << 11) +#define OMAP3430_VP1_OPPCHANGEDONE_EN_MASK (1 << 10) +#define OMAP3430_IO_EN_MASK (1 << 9) +#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_MASK (1 << 8) #define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT 8 -#define OMAP3430_MPU_DPLL_RECAL_EN (1 << 7) +#define OMAP3430_MPU_DPLL_RECAL_EN_MASK (1 << 7) #define OMAP3430_MPU_DPLL_RECAL_EN_SHIFT 7 -#define OMAP3430_PERIPH_DPLL_RECAL_EN (1 << 6) +#define OMAP3430_PERIPH_DPLL_RECAL_EN_MASK (1 << 6) #define OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT 6 -#define OMAP3430_CORE_DPLL_RECAL_EN (1 << 5) +#define OMAP3430_CORE_DPLL_RECAL_EN_MASK (1 << 5) #define OMAP3430_CORE_DPLL_RECAL_EN_SHIFT 5 -#define OMAP3430_TRANSITION_EN (1 << 4) -#define OMAP3430_EVGENOFF_EN (1 << 3) -#define OMAP3430_EVGENON_EN (1 << 2) -#define OMAP3430_FS_USB_WKUP_EN (1 << 1) +#define OMAP3430_TRANSITION_EN_MASK (1 << 4) +#define OMAP3430_EVGENOFF_EN_MASK (1 << 3) +#define OMAP3430_EVGENON_EN_MASK (1 << 2) +#define OMAP3430_FS_USB_WKUP_EN_MASK (1 << 1) /* RM_RSTST_MPU specific bits */ -#define OMAP3430_EMULATION_MPU_RST (1 << 11) +#define OMAP3430_EMULATION_MPU_RST_MASK (1 << 11) /* PM_WKDEP_MPU specific bits */ #define OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT 5 @@ -289,7 +289,7 @@ #define OMAP3430_OFFLOADMODE_MASK (0x3 << 3) #define OMAP3430_ONLOADMODE_SHIFT 1 #define OMAP3430_ONLOADMODE_MASK (0x3 << 1) -#define OMAP3430_ENABLE (1 << 0) +#define OMAP3430_ENABLE_MASK (1 << 0) /* PM_EVGENONTIM_MPU */ #define OMAP3430_ONTIMEVAL_SHIFT 0 @@ -302,32 +302,32 @@ /* PM_PWSTCTRL_MPU specific bits */ #define OMAP3430_L2CACHEONSTATE_SHIFT 16 #define OMAP3430_L2CACHEONSTATE_MASK (0x3 << 16) -#define OMAP3430_L2CACHERETSTATE (1 << 8) -#define OMAP3430_LOGICL1CACHERETSTATE (1 << 2) +#define OMAP3430_L2CACHERETSTATE_MASK (1 << 8) +#define OMAP3430_LOGICL1CACHERETSTATE_MASK (1 << 2) /* PM_PWSTST_MPU specific bits */ #define OMAP3430_L2CACHESTATEST_SHIFT 6 #define OMAP3430_L2CACHESTATEST_MASK (0x3 << 6) -#define OMAP3430_LOGICL1CACHESTATEST (1 << 2) +#define OMAP3430_LOGICL1CACHESTATEST_MASK (1 << 2) /* PM_PREPWSTST_MPU specific bits */ #define OMAP3430_LASTL2CACHESTATEENTERED_SHIFT 6 #define OMAP3430_LASTL2CACHESTATEENTERED_MASK (0x3 << 6) -#define OMAP3430_LASTLOGICL1CACHESTATEENTERED (1 << 2) +#define OMAP3430_LASTLOGICL1CACHESTATEENTERED_MASK (1 << 2) /* RM_RSTCTRL_CORE */ -#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON (1 << 1) -#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST (1 << 0) +#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK (1 << 1) +#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK (1 << 0) /* RM_RSTST_CORE specific bits */ -#define OMAP3430_MODEM_SECURITY_VIOL_RST (1 << 10) -#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RSTPWRON (1 << 9) -#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RST (1 << 8) +#define OMAP3430_MODEM_SECURITY_VIOL_RST_MASK (1 << 10) +#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RSTPWRON_MASK (1 << 9) +#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RST_MASK (1 << 8) /* PM_WKEN1_CORE specific bits */ /* PM_MPUGRPSEL1_CORE specific bits */ -#define OMAP3430_GRPSEL_FSHOSTUSB (1 << 5) +#define OMAP3430_GRPSEL_FSHOSTUSB_MASK (1 << 5) /* PM_IVA2GRPSEL1_CORE specific bits */ @@ -338,8 +338,8 @@ #define OMAP3430_MEM2ONSTATE_MASK (0x3 << 18) #define OMAP3430_MEM1ONSTATE_SHIFT 16 #define OMAP3430_MEM1ONSTATE_MASK (0x3 << 16) -#define OMAP3430_MEM2RETSTATE (1 << 9) -#define OMAP3430_MEM1RETSTATE (1 << 8) +#define OMAP3430_MEM2RETSTATE_MASK (1 << 9) +#define OMAP3430_MEM1RETSTATE_MASK (1 << 8) /* PM_PWSTST_CORE specific bits */ #define OMAP3430_MEM2STATEST_SHIFT 6 @@ -356,7 +356,7 @@ /* RM_RSTST_GFX specific bits */ /* PM_WKDEP_GFX specific bits */ -#define OMAP3430_PM_WKDEP_GFX_EN_IVA2 (1 << 2) +#define OMAP3430_PM_WKDEP_GFX_EN_IVA2_MASK (1 << 2) /* PM_PWSTCTRL_GFX specific bits */ @@ -365,33 +365,33 @@ /* PM_PREPWSTST_GFX specific bits */ /* PM_WKEN_WKUP specific bits */ -#define OMAP3430_EN_IO_CHAIN (1 << 16) -#define OMAP3430_EN_IO (1 << 8) -#define OMAP3430_EN_GPIO1 (1 << 3) +#define OMAP3430_EN_IO_CHAIN_MASK (1 << 16) +#define OMAP3430_EN_IO_MASK (1 << 8) +#define OMAP3430_EN_GPIO1_MASK (1 << 3) /* PM_MPUGRPSEL_WKUP specific bits */ /* PM_IVA2GRPSEL_WKUP specific bits */ /* PM_WKST_WKUP specific bits */ -#define OMAP3430_ST_IO_CHAIN (1 << 16) -#define OMAP3430_ST_IO (1 << 8) +#define OMAP3430_ST_IO_CHAIN_MASK (1 << 16) +#define OMAP3430_ST_IO_MASK (1 << 8) /* PRM_CLKSEL */ #define OMAP3430_SYS_CLKIN_SEL_SHIFT 0 #define OMAP3430_SYS_CLKIN_SEL_MASK (0x7 << 0) /* PRM_CLKOUT_CTRL */ -#define OMAP3430_CLKOUT_EN (1 << 7) +#define OMAP3430_CLKOUT_EN_MASK (1 << 7) #define OMAP3430_CLKOUT_EN_SHIFT 7 /* RM_RSTST_DSS specific bits */ /* PM_WKEN_DSS */ -#define OMAP3430_PM_WKEN_DSS_EN_DSS (1 << 0) +#define OMAP3430_PM_WKEN_DSS_EN_DSS_MASK (1 << 0) /* PM_WKDEP_DSS specific bits */ -#define OMAP3430_PM_WKDEP_DSS_EN_IVA2 (1 << 2) +#define OMAP3430_PM_WKDEP_DSS_EN_IVA2_MASK (1 << 2) /* PM_PWSTCTRL_DSS specific bits */ @@ -402,7 +402,7 @@ /* RM_RSTST_CAM specific bits */ /* PM_WKDEP_CAM specific bits */ -#define OMAP3430_PM_WKDEP_CAM_EN_IVA2 (1 << 2) +#define OMAP3430_PM_WKDEP_CAM_EN_IVA2_MASK (1 << 2) /* PM_PWSTCTRL_CAM specific bits */ @@ -424,7 +424,7 @@ /* PM_WKST_PER specific bits */ /* PM_WKDEP_PER specific bits */ -#define OMAP3430_PM_WKDEP_PER_EN_IVA2 (1 << 2) +#define OMAP3430_PM_WKDEP_PER_EN_IVA2_MASK (1 << 2) /* PM_PWSTCTRL_PER specific bits */ @@ -467,26 +467,26 @@ /* PRM_VC_CMD_VAL_1 specific bits */ /* PRM_VC_CH_CONF */ -#define OMAP3430_CMD1 (1 << 20) -#define OMAP3430_RACEN1 (1 << 19) -#define OMAP3430_RAC1 (1 << 18) -#define OMAP3430_RAV1 (1 << 17) -#define OMAP3430_PRM_VC_CH_CONF_SA1 (1 << 16) -#define OMAP3430_CMD0 (1 << 4) -#define OMAP3430_RACEN0 (1 << 3) -#define OMAP3430_RAC0 (1 << 2) -#define OMAP3430_RAV0 (1 << 1) -#define OMAP3430_PRM_VC_CH_CONF_SA0 (1 << 0) +#define OMAP3430_CMD1_MASK (1 << 20) +#define OMAP3430_RACEN1_MASK (1 << 19) +#define OMAP3430_RAC1_MASK (1 << 18) +#define OMAP3430_RAV1_MASK (1 << 17) +#define OMAP3430_PRM_VC_CH_CONF_SA1_MASK (1 << 16) +#define OMAP3430_CMD0_MASK (1 << 4) +#define OMAP3430_RACEN0_MASK (1 << 3) +#define OMAP3430_RAC0_MASK (1 << 2) +#define OMAP3430_RAV0_MASK (1 << 1) +#define OMAP3430_PRM_VC_CH_CONF_SA0_MASK (1 << 0) /* PRM_VC_I2C_CFG */ -#define OMAP3430_HSMASTER (1 << 5) -#define OMAP3430_SREN (1 << 4) -#define OMAP3430_HSEN (1 << 3) +#define OMAP3430_HSMASTER_MASK (1 << 5) +#define OMAP3430_SREN_MASK (1 << 4) +#define OMAP3430_HSEN_MASK (1 << 3) #define OMAP3430_MCODE_SHIFT 0 #define OMAP3430_MCODE_MASK (0x7 << 0) /* PRM_VC_BYPASS_VAL */ -#define OMAP3430_VALID (1 << 24) +#define OMAP3430_VALID_MASK (1 << 24) #define OMAP3430_DATA_SHIFT 16 #define OMAP3430_DATA_MASK (0xff << 16) #define OMAP3430_REGADDR_SHIFT 8 @@ -495,8 +495,8 @@ #define OMAP3430_SLAVEADDR_MASK (0x7f << 0) /* PRM_RSTCTRL */ -#define OMAP3430_RST_DPLL3 (1 << 2) -#define OMAP3430_RST_GS (1 << 1) +#define OMAP3430_RST_DPLL3_MASK (1 << 2) +#define OMAP3430_RST_GS_MASK (1 << 1) /* PRM_RSTTIME */ #define OMAP3430_RSTTIME2_SHIFT 8 @@ -505,23 +505,23 @@ #define OMAP3430_RSTTIME1_MASK (0xff << 0) /* PRM_RSTST */ -#define OMAP3430_ICECRUSHER_RST (1 << 10) -#define OMAP3430_ICEPICK_RST (1 << 9) -#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST (1 << 8) -#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST (1 << 7) -#define OMAP3430_EXTERNAL_WARM_RST (1 << 6) -#define OMAP3430_SECURE_WD_RST (1 << 5) -#define OMAP3430_MPU_WD_RST (1 << 4) -#define OMAP3430_SECURITY_VIOL_RST (1 << 3) -#define OMAP3430_GLOBAL_SW_RST (1 << 1) -#define OMAP3430_GLOBAL_COLD_RST (1 << 0) +#define OMAP3430_ICECRUSHER_RST_MASK (1 << 10) +#define OMAP3430_ICEPICK_RST_MASK (1 << 9) +#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_MASK (1 << 8) +#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_MASK (1 << 7) +#define OMAP3430_EXTERNAL_WARM_RST_MASK (1 << 6) +#define OMAP3430_SECURE_WD_RST_MASK (1 << 5) +#define OMAP3430_MPU_WD_RST_MASK (1 << 4) +#define OMAP3430_SECURITY_VIOL_RST_MASK (1 << 3) +#define OMAP3430_GLOBAL_SW_RST_MASK (1 << 1) +#define OMAP3430_GLOBAL_COLD_RST_MASK (1 << 0) /* PRM_VOLTCTRL */ -#define OMAP3430_SEL_VMODE (1 << 4) -#define OMAP3430_SEL_OFF (1 << 3) -#define OMAP3430_AUTO_OFF (1 << 2) -#define OMAP3430_AUTO_RET (1 << 1) -#define OMAP3430_AUTO_SLEEP (1 << 0) +#define OMAP3430_SEL_VMODE_MASK (1 << 4) +#define OMAP3430_SEL_OFF_MASK (1 << 3) +#define OMAP3430_AUTO_OFF_MASK (1 << 2) +#define OMAP3430_AUTO_RET_MASK (1 << 1) +#define OMAP3430_AUTO_SLEEP_MASK (1 << 0) /* PRM_SRAM_PCHARGE */ #define OMAP3430_PCHARGE_TIME_SHIFT 0 @@ -550,10 +550,10 @@ #define OMAP3430_SETUP_TIME_MASK (0xffff << 0) /* PRM_POLCTRL */ -#define OMAP3430_OFFMODE_POL (1 << 3) -#define OMAP3430_CLKOUT_POL (1 << 2) -#define OMAP3430_CLKREQ_POL (1 << 1) -#define OMAP3430_EXTVOL_POL (1 << 0) +#define OMAP3430_OFFMODE_POL_MASK (1 << 3) +#define OMAP3430_CLKOUT_POL_MASK (1 << 2) +#define OMAP3430_CLKREQ_POL_MASK (1 << 1) +#define OMAP3430_EXTVOL_POL_MASK (1 << 0) /* PRM_VOLTSETUP2 */ #define OMAP3430_OFFMODESETUPTIME_SHIFT 0 diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index 5fba2aa8932c..588873b9303a 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -24,8 +24,8 @@ OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) #define OMAP44XX_PRM_REGADDR(module, reg) \ OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (module) + (reg)) -#define OMAP44XX_CHIRONSS_REGADDR(module, reg) \ - OMAP2_L4_IO_ADDRESS(OMAP4430_CHIRONSS_BASE + (module) + (reg)) +#define OMAP44XX_PRCM_MPU_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE + (module) + (reg)) #include "prm44xx.h" @@ -284,7 +284,7 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) #define OMAP_OFFLOADMODE_MASK (0x3 << 3) #define OMAP_ONLOADMODE_SHIFT 1 #define OMAP_ONLOADMODE_MASK (0x3 << 1) -#define OMAP_ENABLE (1 << 0) +#define OMAP_ENABLE_MASK (1 << 0) /* PRM_RSTTIME */ /* Named RM_RSTTIME_WKUP on the 24xx */ @@ -296,8 +296,8 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) /* PRM_RSTCTRL */ /* Named RM_RSTCTRL_WKUP on the 24xx */ /* 2420 calls RST_DPLL3 'RST_DPLL' */ -#define OMAP_RST_DPLL3 (1 << 2) -#define OMAP_RST_GS (1 << 1) +#define OMAP_RST_DPLL3_MASK (1 << 2) +#define OMAP_RST_GS_MASK (1 << 1) /* @@ -316,7 +316,7 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) * PM_PWSTST_DSS, PM_PWSTST_CAM, PM_PWSTST_PER, PM_PWSTST_EMU, * PM_PWSTST_NEON */ -#define OMAP_INTRANSITION (1 << 20) +#define OMAP_INTRANSITION_MASK (1 << 20) /* @@ -338,7 +338,7 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) * 3430: RM_RSTST_IVA2, RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSS, * RM_RSTST_CAM, RM_RSTST_PER, RM_RSTST_NEON */ -#define OMAP_COREDOMAINWKUP_RST (1 << 3) +#define OMAP_COREDOMAINWKUP_RST_MASK (1 << 3) /* * 24XX: RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSP @@ -347,7 +347,7 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) * * 3430: RM_RSTST_CORE, RM_RSTST_EMU */ -#define OMAP_DOMAINWKUP_RST (1 << 2) +#define OMAP_DOMAINWKUP_RST_MASK (1 << 2) /* * 24XX: RM_RSTST_MPU, RM_RSTST_WKUP, RM_RSTST_DSP @@ -357,8 +357,8 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) * * 3430: RM_RSTST_CORE, RM_RSTST_EMU */ -#define OMAP_GLOBALWARM_RST (1 << 1) -#define OMAP_GLOBALCOLD_RST (1 << 0) +#define OMAP_GLOBALWARM_RST_MASK (1 << 1) +#define OMAP_GLOBALCOLD_RST_MASK (1 << 0) /* * 24XX: PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_CORE, PM_WKDEP_DSP @@ -382,7 +382,7 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) * PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER, * PM_PWSTCTRL_NEON */ -#define OMAP_LOGICRETSTATE (1 << 2) +#define OMAP_LOGICRETSTATE_MASK (1 << 2) /* * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX, diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index adb2558bb121..fe8ef26431e5 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -1,8 +1,8 @@ /* * OMAP44xx PRM instance offset macros * - * Copyright (C) 2009 Texas Instruments, Inc. - * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2009-2010 Texas Instruments, Inc. + * Copyright (C) 2009-2010 Nokia Corporation * * Paul Walmsley (paul@pwsan.com) * Rajendra Nayak (rnayak@ti.com) @@ -25,387 +25,726 @@ /* PRM */ - /* PRM.OCP_SOCKET_PRM register offsets */ +#define OMAP4_REVISION_PRM_OFFSET 0x0000 #define OMAP4430_REVISION_PRM OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0000) +#define OMAP4_PRM_IRQSTATUS_MPU_OFFSET 0x0010 #define OMAP4430_PRM_IRQSTATUS_MPU OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0010) +#define OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET 0x0014 #define OMAP4430_PRM_IRQSTATUS_MPU_2 OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0014) +#define OMAP4_PRM_IRQENABLE_MPU_OFFSET 0x0018 #define OMAP4430_PRM_IRQENABLE_MPU OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0018) +#define OMAP4_PRM_IRQENABLE_MPU_2_OFFSET 0x001c #define OMAP4430_PRM_IRQENABLE_MPU_2 OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x001c) +#define OMAP4_PRM_IRQSTATUS_DUCATI_OFFSET 0x0020 #define OMAP4430_PRM_IRQSTATUS_DUCATI OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0020) +#define OMAP4_PRM_IRQENABLE_DUCATI_OFFSET 0x0028 #define OMAP4430_PRM_IRQENABLE_DUCATI OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0028) +#define OMAP4_PRM_IRQSTATUS_TESLA_OFFSET 0x0030 #define OMAP4430_PRM_IRQSTATUS_TESLA OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0030) +#define OMAP4_PRM_IRQENABLE_TESLA_OFFSET 0x0038 #define OMAP4430_PRM_IRQENABLE_TESLA OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0038) +#define OMAP4_PRM_PRM_PROFILING_CLKCTRL_OFFSET 0x0040 #define OMAP4430_PRM_PRM_PROFILING_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0040) /* PRM.CKGEN_PRM register offsets */ +#define OMAP4_CM_ABE_DSS_SYS_CLKSEL_OFFSET 0x0000 #define OMAP4430_CM_ABE_DSS_SYS_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0000) +#define OMAP4_CM_DPLL_SYS_REF_CLKSEL_OFFSET 0x0004 #define OMAP4430_CM_DPLL_SYS_REF_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0004) +#define OMAP4_CM_L4_WKUP_CLKSEL_OFFSET 0x0008 #define OMAP4430_CM_L4_WKUP_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0008) +#define OMAP4_CM_ABE_PLL_REF_CLKSEL_OFFSET 0x000c #define OMAP4430_CM_ABE_PLL_REF_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x000c) +#define OMAP4_CM_SYS_CLKSEL_OFFSET 0x0010 #define OMAP4430_CM_SYS_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0010) /* PRM.MPU_PRM register offsets */ +#define OMAP4_PM_MPU_PWRSTCTRL_OFFSET 0x0000 #define OMAP4430_PM_MPU_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0000) +#define OMAP4_PM_MPU_PWRSTST_OFFSET 0x0004 #define OMAP4430_PM_MPU_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0004) +#define OMAP4_RM_MPU_RSTST_OFFSET 0x0014 #define OMAP4430_RM_MPU_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0014) +#define OMAP4_RM_MPU_MPU_CONTEXT_OFFSET 0x0024 #define OMAP4430_RM_MPU_MPU_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0024) /* PRM.TESLA_PRM register offsets */ +#define OMAP4_PM_TESLA_PWRSTCTRL_OFFSET 0x0000 #define OMAP4430_PM_TESLA_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0000) +#define OMAP4_PM_TESLA_PWRSTST_OFFSET 0x0004 #define OMAP4430_PM_TESLA_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0004) +#define OMAP4_RM_TESLA_RSTCTRL_OFFSET 0x0010 #define OMAP4430_RM_TESLA_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0010) +#define OMAP4_RM_TESLA_RSTST_OFFSET 0x0014 #define OMAP4430_RM_TESLA_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0014) +#define OMAP4_RM_TESLA_TESLA_CONTEXT_OFFSET 0x0024 #define OMAP4430_RM_TESLA_TESLA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0024) /* PRM.ABE_PRM register offsets */ +#define OMAP4_PM_ABE_PWRSTCTRL_OFFSET 0x0000 #define OMAP4430_PM_ABE_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0000) +#define OMAP4_PM_ABE_PWRSTST_OFFSET 0x0004 #define OMAP4430_PM_ABE_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0004) +#define OMAP4_RM_ABE_AESS_CONTEXT_OFFSET 0x002c #define OMAP4430_RM_ABE_AESS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x002c) +#define OMAP4_PM_ABE_PDM_WKDEP_OFFSET 0x0030 #define OMAP4430_PM_ABE_PDM_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0030) +#define OMAP4_RM_ABE_PDM_CONTEXT_OFFSET 0x0034 #define OMAP4430_RM_ABE_PDM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0034) +#define OMAP4_PM_ABE_DMIC_WKDEP_OFFSET 0x0038 #define OMAP4430_PM_ABE_DMIC_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0038) +#define OMAP4_RM_ABE_DMIC_CONTEXT_OFFSET 0x003c #define OMAP4430_RM_ABE_DMIC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x003c) +#define OMAP4_PM_ABE_MCASP_WKDEP_OFFSET 0x0040 #define OMAP4430_PM_ABE_MCASP_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0040) +#define OMAP4_RM_ABE_MCASP_CONTEXT_OFFSET 0x0044 #define OMAP4430_RM_ABE_MCASP_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0044) +#define OMAP4_PM_ABE_MCBSP1_WKDEP_OFFSET 0x0048 #define OMAP4430_PM_ABE_MCBSP1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0048) +#define OMAP4_RM_ABE_MCBSP1_CONTEXT_OFFSET 0x004c #define OMAP4430_RM_ABE_MCBSP1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x004c) +#define OMAP4_PM_ABE_MCBSP2_WKDEP_OFFSET 0x0050 #define OMAP4430_PM_ABE_MCBSP2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0050) +#define OMAP4_RM_ABE_MCBSP2_CONTEXT_OFFSET 0x0054 #define OMAP4430_RM_ABE_MCBSP2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0054) +#define OMAP4_PM_ABE_MCBSP3_WKDEP_OFFSET 0x0058 #define OMAP4430_PM_ABE_MCBSP3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0058) +#define OMAP4_RM_ABE_MCBSP3_CONTEXT_OFFSET 0x005c #define OMAP4430_RM_ABE_MCBSP3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x005c) +#define OMAP4_PM_ABE_SLIMBUS_WKDEP_OFFSET 0x0060 #define OMAP4430_PM_ABE_SLIMBUS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0060) +#define OMAP4_RM_ABE_SLIMBUS_CONTEXT_OFFSET 0x0064 #define OMAP4430_RM_ABE_SLIMBUS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0064) +#define OMAP4_PM_ABE_TIMER5_WKDEP_OFFSET 0x0068 #define OMAP4430_PM_ABE_TIMER5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0068) +#define OMAP4_RM_ABE_TIMER5_CONTEXT_OFFSET 0x006c #define OMAP4430_RM_ABE_TIMER5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x006c) +#define OMAP4_PM_ABE_TIMER6_WKDEP_OFFSET 0x0070 #define OMAP4430_PM_ABE_TIMER6_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0070) +#define OMAP4_RM_ABE_TIMER6_CONTEXT_OFFSET 0x0074 #define OMAP4430_RM_ABE_TIMER6_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0074) +#define OMAP4_PM_ABE_TIMER7_WKDEP_OFFSET 0x0078 #define OMAP4430_PM_ABE_TIMER7_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0078) +#define OMAP4_RM_ABE_TIMER7_CONTEXT_OFFSET 0x007c #define OMAP4430_RM_ABE_TIMER7_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x007c) +#define OMAP4_PM_ABE_TIMER8_WKDEP_OFFSET 0x0080 #define OMAP4430_PM_ABE_TIMER8_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0080) +#define OMAP4_RM_ABE_TIMER8_CONTEXT_OFFSET 0x0084 #define OMAP4430_RM_ABE_TIMER8_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0084) +#define OMAP4_PM_ABE_WDT3_WKDEP_OFFSET 0x0088 #define OMAP4430_PM_ABE_WDT3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0088) +#define OMAP4_RM_ABE_WDT3_CONTEXT_OFFSET 0x008c #define OMAP4430_RM_ABE_WDT3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x008c) /* PRM.ALWAYS_ON_PRM register offsets */ +#define OMAP4_RM_ALWON_MDMINTC_CONTEXT_OFFSET 0x0024 #define OMAP4430_RM_ALWON_MDMINTC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0024) +#define OMAP4_PM_ALWON_SR_MPU_WKDEP_OFFSET 0x0028 #define OMAP4430_PM_ALWON_SR_MPU_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0028) +#define OMAP4_RM_ALWON_SR_MPU_CONTEXT_OFFSET 0x002c #define OMAP4430_RM_ALWON_SR_MPU_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x002c) +#define OMAP4_PM_ALWON_SR_IVA_WKDEP_OFFSET 0x0030 #define OMAP4430_PM_ALWON_SR_IVA_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0030) +#define OMAP4_RM_ALWON_SR_IVA_CONTEXT_OFFSET 0x0034 #define OMAP4430_RM_ALWON_SR_IVA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0034) +#define OMAP4_PM_ALWON_SR_CORE_WKDEP_OFFSET 0x0038 #define OMAP4430_PM_ALWON_SR_CORE_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0038) +#define OMAP4_RM_ALWON_SR_CORE_CONTEXT_OFFSET 0x003c #define OMAP4430_RM_ALWON_SR_CORE_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x003c) /* PRM.CORE_PRM register offsets */ +#define OMAP4_PM_CORE_PWRSTCTRL_OFFSET 0x0000 #define OMAP4430_PM_CORE_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0000) +#define OMAP4_PM_CORE_PWRSTST_OFFSET 0x0004 #define OMAP4430_PM_CORE_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0004) +#define OMAP4_RM_L3_1_L3_1_CONTEXT_OFFSET 0x0024 #define OMAP4430_RM_L3_1_L3_1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0024) +#define OMAP4_RM_L3_2_L3_2_CONTEXT_OFFSET 0x0124 #define OMAP4430_RM_L3_2_L3_2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0124) +#define OMAP4_RM_L3_2_GPMC_CONTEXT_OFFSET 0x012c #define OMAP4430_RM_L3_2_GPMC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x012c) +#define OMAP4_RM_L3_2_OCMC_RAM_CONTEXT_OFFSET 0x0134 #define OMAP4430_RM_L3_2_OCMC_RAM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0134) +#define OMAP4_RM_DUCATI_RSTCTRL_OFFSET 0x0210 #define OMAP4430_RM_DUCATI_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0210) +#define OMAP4_RM_DUCATI_RSTST_OFFSET 0x0214 #define OMAP4430_RM_DUCATI_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0214) +#define OMAP4_RM_DUCATI_DUCATI_CONTEXT_OFFSET 0x0224 #define OMAP4430_RM_DUCATI_DUCATI_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0224) +#define OMAP4_RM_SDMA_SDMA_CONTEXT_OFFSET 0x0324 #define OMAP4430_RM_SDMA_SDMA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0324) +#define OMAP4_RM_MEMIF_DMM_CONTEXT_OFFSET 0x0424 #define OMAP4430_RM_MEMIF_DMM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0424) +#define OMAP4_RM_MEMIF_EMIF_FW_CONTEXT_OFFSET 0x042c #define OMAP4430_RM_MEMIF_EMIF_FW_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x042c) +#define OMAP4_RM_MEMIF_EMIF_1_CONTEXT_OFFSET 0x0434 #define OMAP4430_RM_MEMIF_EMIF_1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0434) +#define OMAP4_RM_MEMIF_EMIF_2_CONTEXT_OFFSET 0x043c #define OMAP4430_RM_MEMIF_EMIF_2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x043c) +#define OMAP4_RM_MEMIF_DLL_CONTEXT_OFFSET 0x0444 #define OMAP4430_RM_MEMIF_DLL_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0444) +#define OMAP4_RM_MEMIF_EMIF_H1_CONTEXT_OFFSET 0x0454 #define OMAP4430_RM_MEMIF_EMIF_H1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0454) +#define OMAP4_RM_MEMIF_EMIF_H2_CONTEXT_OFFSET 0x045c #define OMAP4430_RM_MEMIF_EMIF_H2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x045c) +#define OMAP4_RM_MEMIF_DLL_H_CONTEXT_OFFSET 0x0464 #define OMAP4430_RM_MEMIF_DLL_H_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0464) +#define OMAP4_RM_D2D_SAD2D_CONTEXT_OFFSET 0x0524 #define OMAP4430_RM_D2D_SAD2D_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0524) +#define OMAP4_RM_D2D_MODEM_ICR_CONTEXT_OFFSET 0x052c #define OMAP4430_RM_D2D_MODEM_ICR_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x052c) +#define OMAP4_RM_D2D_SAD2D_FW_CONTEXT_OFFSET 0x0534 #define OMAP4430_RM_D2D_SAD2D_FW_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0534) +#define OMAP4_RM_L4CFG_L4_CFG_CONTEXT_OFFSET 0x0624 #define OMAP4430_RM_L4CFG_L4_CFG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0624) +#define OMAP4_RM_L4CFG_HW_SEM_CONTEXT_OFFSET 0x062c #define OMAP4430_RM_L4CFG_HW_SEM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x062c) +#define OMAP4_RM_L4CFG_MAILBOX_CONTEXT_OFFSET 0x0634 #define OMAP4430_RM_L4CFG_MAILBOX_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0634) +#define OMAP4_RM_L4CFG_SAR_ROM_CONTEXT_OFFSET 0x063c #define OMAP4430_RM_L4CFG_SAR_ROM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x063c) +#define OMAP4_RM_L3INSTR_L3_3_CONTEXT_OFFSET 0x0724 #define OMAP4430_RM_L3INSTR_L3_3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0724) +#define OMAP4_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET 0x072c #define OMAP4430_RM_L3INSTR_L3_INSTR_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x072c) +#define OMAP4_RM_L3INSTR_OCP_WP1_CONTEXT_OFFSET 0x0744 #define OMAP4430_RM_L3INSTR_OCP_WP1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0744) /* PRM.IVAHD_PRM register offsets */ +#define OMAP4_PM_IVAHD_PWRSTCTRL_OFFSET 0x0000 #define OMAP4430_PM_IVAHD_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0000) +#define OMAP4_PM_IVAHD_PWRSTST_OFFSET 0x0004 #define OMAP4430_PM_IVAHD_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0004) +#define OMAP4_RM_IVAHD_RSTCTRL_OFFSET 0x0010 #define OMAP4430_RM_IVAHD_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0010) +#define OMAP4_RM_IVAHD_RSTST_OFFSET 0x0014 #define OMAP4430_RM_IVAHD_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0014) +#define OMAP4_RM_IVAHD_IVAHD_CONTEXT_OFFSET 0x0024 #define OMAP4430_RM_IVAHD_IVAHD_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0024) +#define OMAP4_RM_IVAHD_SL2_CONTEXT_OFFSET 0x002c #define OMAP4430_RM_IVAHD_SL2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x002c) /* PRM.CAM_PRM register offsets */ +#define OMAP4_PM_CAM_PWRSTCTRL_OFFSET 0x0000 #define OMAP4430_PM_CAM_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0000) +#define OMAP4_PM_CAM_PWRSTST_OFFSET 0x0004 #define OMAP4430_PM_CAM_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0004) +#define OMAP4_RM_CAM_ISS_CONTEXT_OFFSET 0x0024 #define OMAP4430_RM_CAM_ISS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0024) +#define OMAP4_RM_CAM_FDIF_CONTEXT_OFFSET 0x002c #define OMAP4430_RM_CAM_FDIF_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x002c) /* PRM.DSS_PRM register offsets */ +#define OMAP4_PM_DSS_PWRSTCTRL_OFFSET 0x0000 #define OMAP4430_PM_DSS_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0000) +#define OMAP4_PM_DSS_PWRSTST_OFFSET 0x0004 #define OMAP4430_PM_DSS_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0004) +#define OMAP4_PM_DSS_DSS_WKDEP_OFFSET 0x0020 #define OMAP4430_PM_DSS_DSS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0020) +#define OMAP4_RM_DSS_DSS_CONTEXT_OFFSET 0x0024 #define OMAP4430_RM_DSS_DSS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0024) +#define OMAP4_RM_DSS_DEISS_CONTEXT_OFFSET 0x002c #define OMAP4430_RM_DSS_DEISS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x002c) /* PRM.GFX_PRM register offsets */ +#define OMAP4_PM_GFX_PWRSTCTRL_OFFSET 0x0000 #define OMAP4430_PM_GFX_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0000) +#define OMAP4_PM_GFX_PWRSTST_OFFSET 0x0004 #define OMAP4430_PM_GFX_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0004) +#define OMAP4_RM_GFX_GFX_CONTEXT_OFFSET 0x0024 #define OMAP4430_RM_GFX_GFX_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0024) /* PRM.L3INIT_PRM register offsets */ +#define OMAP4_PM_L3INIT_PWRSTCTRL_OFFSET 0x0000 #define OMAP4430_PM_L3INIT_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0000) +#define OMAP4_PM_L3INIT_PWRSTST_OFFSET 0x0004 #define OMAP4430_PM_L3INIT_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0004) +#define OMAP4_PM_L3INIT_MMC1_WKDEP_OFFSET 0x0028 #define OMAP4430_PM_L3INIT_MMC1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0028) +#define OMAP4_RM_L3INIT_MMC1_CONTEXT_OFFSET 0x002c #define OMAP4430_RM_L3INIT_MMC1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x002c) +#define OMAP4_PM_L3INIT_MMC2_WKDEP_OFFSET 0x0030 #define OMAP4430_PM_L3INIT_MMC2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0030) +#define OMAP4_RM_L3INIT_MMC2_CONTEXT_OFFSET 0x0034 #define OMAP4430_RM_L3INIT_MMC2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0034) +#define OMAP4_PM_L3INIT_HSI_WKDEP_OFFSET 0x0038 #define OMAP4430_PM_L3INIT_HSI_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0038) +#define OMAP4_RM_L3INIT_HSI_CONTEXT_OFFSET 0x003c #define OMAP4430_RM_L3INIT_HSI_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x003c) +#define OMAP4_PM_L3INIT_UNIPRO1_WKDEP_OFFSET 0x0040 #define OMAP4430_PM_L3INIT_UNIPRO1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0040) +#define OMAP4_RM_L3INIT_UNIPRO1_CONTEXT_OFFSET 0x0044 #define OMAP4430_RM_L3INIT_UNIPRO1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0044) +#define OMAP4_PM_L3INIT_USB_HOST_WKDEP_OFFSET 0x0058 #define OMAP4430_PM_L3INIT_USB_HOST_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0058) +#define OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET 0x005c #define OMAP4430_RM_L3INIT_USB_HOST_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x005c) +#define OMAP4_PM_L3INIT_USB_OTG_WKDEP_OFFSET 0x0060 #define OMAP4430_PM_L3INIT_USB_OTG_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0060) +#define OMAP4_RM_L3INIT_USB_OTG_CONTEXT_OFFSET 0x0064 #define OMAP4430_RM_L3INIT_USB_OTG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0064) +#define OMAP4_PM_L3INIT_USB_TLL_WKDEP_OFFSET 0x0068 #define OMAP4430_PM_L3INIT_USB_TLL_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0068) +#define OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET 0x006c #define OMAP4430_RM_L3INIT_USB_TLL_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x006c) +#define OMAP4_RM_L3INIT_P1500_CONTEXT_OFFSET 0x007c #define OMAP4430_RM_L3INIT_P1500_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x007c) +#define OMAP4_RM_L3INIT_EMAC_CONTEXT_OFFSET 0x0084 #define OMAP4430_RM_L3INIT_EMAC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0084) +#define OMAP4_PM_L3INIT_SATA_WKDEP_OFFSET 0x0088 #define OMAP4430_PM_L3INIT_SATA_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0088) +#define OMAP4_RM_L3INIT_SATA_CONTEXT_OFFSET 0x008c #define OMAP4430_RM_L3INIT_SATA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x008c) +#define OMAP4_RM_L3INIT_TPPSS_CONTEXT_OFFSET 0x0094 #define OMAP4430_RM_L3INIT_TPPSS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0094) +#define OMAP4_PM_L3INIT_PCIESS_WKDEP_OFFSET 0x0098 #define OMAP4430_PM_L3INIT_PCIESS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0098) +#define OMAP4_RM_L3INIT_PCIESS_CONTEXT_OFFSET 0x009c #define OMAP4430_RM_L3INIT_PCIESS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x009c) +#define OMAP4_RM_L3INIT_CCPTX_CONTEXT_OFFSET 0x00ac #define OMAP4430_RM_L3INIT_CCPTX_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00ac) +#define OMAP4_PM_L3INIT_XHPI_WKDEP_OFFSET 0x00c0 #define OMAP4430_PM_L3INIT_XHPI_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c0) +#define OMAP4_RM_L3INIT_XHPI_CONTEXT_OFFSET 0x00c4 #define OMAP4430_RM_L3INIT_XHPI_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c4) +#define OMAP4_PM_L3INIT_MMC6_WKDEP_OFFSET 0x00c8 #define OMAP4430_PM_L3INIT_MMC6_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c8) +#define OMAP4_RM_L3INIT_MMC6_CONTEXT_OFFSET 0x00cc #define OMAP4430_RM_L3INIT_MMC6_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00cc) +#define OMAP4_PM_L3INIT_USB_HOST_FS_WKDEP_OFFSET 0x00d0 #define OMAP4430_PM_L3INIT_USB_HOST_FS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00d0) +#define OMAP4_RM_L3INIT_USB_HOST_FS_CONTEXT_OFFSET 0x00d4 #define OMAP4430_RM_L3INIT_USB_HOST_FS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00d4) +#define OMAP4_RM_L3INIT_USBPHYOCP2SCP_CONTEXT_OFFSET 0x00e4 #define OMAP4430_RM_L3INIT_USBPHYOCP2SCP_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00e4) /* PRM.L4PER_PRM register offsets */ +#define OMAP4_PM_L4PER_PWRSTCTRL_OFFSET 0x0000 #define OMAP4430_PM_L4PER_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0000) +#define OMAP4_PM_L4PER_PWRSTST_OFFSET 0x0004 #define OMAP4430_PM_L4PER_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0004) +#define OMAP4_RM_L4PER_ADC_CONTEXT_OFFSET 0x0024 #define OMAP4430_RM_L4PER_ADC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0024) +#define OMAP4_PM_L4PER_DMTIMER10_WKDEP_OFFSET 0x0028 #define OMAP4430_PM_L4PER_DMTIMER10_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0028) +#define OMAP4_RM_L4PER_DMTIMER10_CONTEXT_OFFSET 0x002c #define OMAP4430_RM_L4PER_DMTIMER10_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x002c) +#define OMAP4_PM_L4PER_DMTIMER11_WKDEP_OFFSET 0x0030 #define OMAP4430_PM_L4PER_DMTIMER11_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0030) +#define OMAP4_RM_L4PER_DMTIMER11_CONTEXT_OFFSET 0x0034 #define OMAP4430_RM_L4PER_DMTIMER11_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0034) +#define OMAP4_PM_L4PER_DMTIMER2_WKDEP_OFFSET 0x0038 #define OMAP4430_PM_L4PER_DMTIMER2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0038) +#define OMAP4_RM_L4PER_DMTIMER2_CONTEXT_OFFSET 0x003c #define OMAP4430_RM_L4PER_DMTIMER2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x003c) +#define OMAP4_PM_L4PER_DMTIMER3_WKDEP_OFFSET 0x0040 #define OMAP4430_PM_L4PER_DMTIMER3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0040) +#define OMAP4_RM_L4PER_DMTIMER3_CONTEXT_OFFSET 0x0044 #define OMAP4430_RM_L4PER_DMTIMER3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0044) +#define OMAP4_PM_L4PER_DMTIMER4_WKDEP_OFFSET 0x0048 #define OMAP4430_PM_L4PER_DMTIMER4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0048) +#define OMAP4_RM_L4PER_DMTIMER4_CONTEXT_OFFSET 0x004c #define OMAP4430_RM_L4PER_DMTIMER4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x004c) +#define OMAP4_PM_L4PER_DMTIMER9_WKDEP_OFFSET 0x0050 #define OMAP4430_PM_L4PER_DMTIMER9_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0050) +#define OMAP4_RM_L4PER_DMTIMER9_CONTEXT_OFFSET 0x0054 #define OMAP4430_RM_L4PER_DMTIMER9_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0054) +#define OMAP4_RM_L4PER_ELM_CONTEXT_OFFSET 0x005c #define OMAP4430_RM_L4PER_ELM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x005c) +#define OMAP4_PM_L4PER_GPIO2_WKDEP_OFFSET 0x0060 #define OMAP4430_PM_L4PER_GPIO2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0060) +#define OMAP4_RM_L4PER_GPIO2_CONTEXT_OFFSET 0x0064 #define OMAP4430_RM_L4PER_GPIO2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0064) +#define OMAP4_PM_L4PER_GPIO3_WKDEP_OFFSET 0x0068 #define OMAP4430_PM_L4PER_GPIO3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0068) +#define OMAP4_RM_L4PER_GPIO3_CONTEXT_OFFSET 0x006c #define OMAP4430_RM_L4PER_GPIO3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x006c) +#define OMAP4_PM_L4PER_GPIO4_WKDEP_OFFSET 0x0070 #define OMAP4430_PM_L4PER_GPIO4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0070) +#define OMAP4_RM_L4PER_GPIO4_CONTEXT_OFFSET 0x0074 #define OMAP4430_RM_L4PER_GPIO4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0074) +#define OMAP4_PM_L4PER_GPIO5_WKDEP_OFFSET 0x0078 #define OMAP4430_PM_L4PER_GPIO5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0078) +#define OMAP4_RM_L4PER_GPIO5_CONTEXT_OFFSET 0x007c #define OMAP4430_RM_L4PER_GPIO5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x007c) +#define OMAP4_PM_L4PER_GPIO6_WKDEP_OFFSET 0x0080 #define OMAP4430_PM_L4PER_GPIO6_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0080) +#define OMAP4_RM_L4PER_GPIO6_CONTEXT_OFFSET 0x0084 #define OMAP4430_RM_L4PER_GPIO6_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0084) +#define OMAP4_RM_L4PER_HDQ1W_CONTEXT_OFFSET 0x008c #define OMAP4430_RM_L4PER_HDQ1W_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x008c) +#define OMAP4_PM_L4PER_HECC1_WKDEP_OFFSET 0x0090 #define OMAP4430_PM_L4PER_HECC1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0090) +#define OMAP4_RM_L4PER_HECC1_CONTEXT_OFFSET 0x0094 #define OMAP4430_RM_L4PER_HECC1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0094) +#define OMAP4_PM_L4PER_HECC2_WKDEP_OFFSET 0x0098 #define OMAP4430_PM_L4PER_HECC2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0098) +#define OMAP4_RM_L4PER_HECC2_CONTEXT_OFFSET 0x009c #define OMAP4430_RM_L4PER_HECC2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x009c) +#define OMAP4_PM_L4PER_I2C1_WKDEP_OFFSET 0x00a0 #define OMAP4430_PM_L4PER_I2C1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a0) +#define OMAP4_RM_L4PER_I2C1_CONTEXT_OFFSET 0x00a4 #define OMAP4430_RM_L4PER_I2C1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a4) +#define OMAP4_PM_L4PER_I2C2_WKDEP_OFFSET 0x00a8 #define OMAP4430_PM_L4PER_I2C2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a8) +#define OMAP4_RM_L4PER_I2C2_CONTEXT_OFFSET 0x00ac #define OMAP4430_RM_L4PER_I2C2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00ac) +#define OMAP4_PM_L4PER_I2C3_WKDEP_OFFSET 0x00b0 #define OMAP4430_PM_L4PER_I2C3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b0) +#define OMAP4_RM_L4PER_I2C3_CONTEXT_OFFSET 0x00b4 #define OMAP4430_RM_L4PER_I2C3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b4) +#define OMAP4_PM_L4PER_I2C4_WKDEP_OFFSET 0x00b8 #define OMAP4430_PM_L4PER_I2C4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b8) +#define OMAP4_RM_L4PER_I2C4_CONTEXT_OFFSET 0x00bc #define OMAP4430_RM_L4PER_I2C4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00bc) +#define OMAP4_RM_L4PER_L4_PER_CONTEXT_OFFSET 0x00c0 #define OMAP4430_RM_L4PER_L4_PER_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00c0) +#define OMAP4_PM_L4PER_MCASP2_WKDEP_OFFSET 0x00d0 #define OMAP4430_PM_L4PER_MCASP2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d0) +#define OMAP4_RM_L4PER_MCASP2_CONTEXT_OFFSET 0x00d4 #define OMAP4430_RM_L4PER_MCASP2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d4) +#define OMAP4_PM_L4PER_MCASP3_WKDEP_OFFSET 0x00d8 #define OMAP4430_PM_L4PER_MCASP3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d8) +#define OMAP4_RM_L4PER_MCASP3_CONTEXT_OFFSET 0x00dc #define OMAP4430_RM_L4PER_MCASP3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00dc) +#define OMAP4_PM_L4PER_MCBSP4_WKDEP_OFFSET 0x00e0 #define OMAP4430_PM_L4PER_MCBSP4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00e0) +#define OMAP4_RM_L4PER_MCBSP4_CONTEXT_OFFSET 0x00e4 #define OMAP4430_RM_L4PER_MCBSP4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00e4) +#define OMAP4_RM_L4PER_MGATE_CONTEXT_OFFSET 0x00ec #define OMAP4430_RM_L4PER_MGATE_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00ec) +#define OMAP4_PM_L4PER_MCSPI1_WKDEP_OFFSET 0x00f0 #define OMAP4430_PM_L4PER_MCSPI1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f0) +#define OMAP4_RM_L4PER_MCSPI1_CONTEXT_OFFSET 0x00f4 #define OMAP4430_RM_L4PER_MCSPI1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f4) +#define OMAP4_PM_L4PER_MCSPI2_WKDEP_OFFSET 0x00f8 #define OMAP4430_PM_L4PER_MCSPI2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f8) +#define OMAP4_RM_L4PER_MCSPI2_CONTEXT_OFFSET 0x00fc #define OMAP4430_RM_L4PER_MCSPI2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00fc) +#define OMAP4_PM_L4PER_MCSPI3_WKDEP_OFFSET 0x0100 #define OMAP4430_PM_L4PER_MCSPI3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0100) +#define OMAP4_RM_L4PER_MCSPI3_CONTEXT_OFFSET 0x0104 #define OMAP4430_RM_L4PER_MCSPI3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0104) +#define OMAP4_PM_L4PER_MCSPI4_WKDEP_OFFSET 0x0108 #define OMAP4430_PM_L4PER_MCSPI4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0108) +#define OMAP4_RM_L4PER_MCSPI4_CONTEXT_OFFSET 0x010c #define OMAP4430_RM_L4PER_MCSPI4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x010c) +#define OMAP4_PM_L4PER_MMCSD3_WKDEP_OFFSET 0x0120 #define OMAP4430_PM_L4PER_MMCSD3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0120) +#define OMAP4_RM_L4PER_MMCSD3_CONTEXT_OFFSET 0x0124 #define OMAP4430_RM_L4PER_MMCSD3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0124) +#define OMAP4_PM_L4PER_MMCSD4_WKDEP_OFFSET 0x0128 #define OMAP4430_PM_L4PER_MMCSD4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0128) +#define OMAP4_RM_L4PER_MMCSD4_CONTEXT_OFFSET 0x012c #define OMAP4430_RM_L4PER_MMCSD4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x012c) +#define OMAP4_RM_L4PER_MSPROHG_CONTEXT_OFFSET 0x0134 #define OMAP4430_RM_L4PER_MSPROHG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0134) +#define OMAP4_PM_L4PER_SLIMBUS2_WKDEP_OFFSET 0x0138 #define OMAP4430_PM_L4PER_SLIMBUS2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0138) +#define OMAP4_RM_L4PER_SLIMBUS2_CONTEXT_OFFSET 0x013c #define OMAP4430_RM_L4PER_SLIMBUS2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x013c) +#define OMAP4_PM_L4PER_UART1_WKDEP_OFFSET 0x0140 #define OMAP4430_PM_L4PER_UART1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0140) +#define OMAP4_RM_L4PER_UART1_CONTEXT_OFFSET 0x0144 #define OMAP4430_RM_L4PER_UART1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0144) +#define OMAP4_PM_L4PER_UART2_WKDEP_OFFSET 0x0148 #define OMAP4430_PM_L4PER_UART2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0148) +#define OMAP4_RM_L4PER_UART2_CONTEXT_OFFSET 0x014c #define OMAP4430_RM_L4PER_UART2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x014c) +#define OMAP4_PM_L4PER_UART3_WKDEP_OFFSET 0x0150 #define OMAP4430_PM_L4PER_UART3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0150) +#define OMAP4_RM_L4PER_UART3_CONTEXT_OFFSET 0x0154 #define OMAP4430_RM_L4PER_UART3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0154) +#define OMAP4_PM_L4PER_UART4_WKDEP_OFFSET 0x0158 #define OMAP4430_PM_L4PER_UART4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0158) +#define OMAP4_RM_L4PER_UART4_CONTEXT_OFFSET 0x015c #define OMAP4430_RM_L4PER_UART4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x015c) +#define OMAP4_PM_L4PER_MMCSD5_WKDEP_OFFSET 0x0160 #define OMAP4430_PM_L4PER_MMCSD5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0160) +#define OMAP4_RM_L4PER_MMCSD5_CONTEXT_OFFSET 0x0164 #define OMAP4430_RM_L4PER_MMCSD5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0164) +#define OMAP4_PM_L4PER_I2C5_WKDEP_OFFSET 0x0168 #define OMAP4430_PM_L4PER_I2C5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0168) +#define OMAP4_RM_L4PER_I2C5_CONTEXT_OFFSET 0x016c #define OMAP4430_RM_L4PER_I2C5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x016c) +#define OMAP4_RM_L4SEC_AES1_CONTEXT_OFFSET 0x01a4 #define OMAP4430_RM_L4SEC_AES1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01a4) +#define OMAP4_RM_L4SEC_AES2_CONTEXT_OFFSET 0x01ac #define OMAP4430_RM_L4SEC_AES2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01ac) +#define OMAP4_RM_L4SEC_DES3DES_CONTEXT_OFFSET 0x01b4 #define OMAP4430_RM_L4SEC_DES3DES_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01b4) +#define OMAP4_RM_L4SEC_PKAEIP29_CONTEXT_OFFSET 0x01bc #define OMAP4430_RM_L4SEC_PKAEIP29_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01bc) +#define OMAP4_RM_L4SEC_RNG_CONTEXT_OFFSET 0x01c4 #define OMAP4430_RM_L4SEC_RNG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01c4) +#define OMAP4_RM_L4SEC_SHA2MD51_CONTEXT_OFFSET 0x01cc #define OMAP4430_RM_L4SEC_SHA2MD51_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01cc) +#define OMAP4_RM_L4SEC_CRYPTODMA_CONTEXT_OFFSET 0x01dc #define OMAP4430_RM_L4SEC_CRYPTODMA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01dc) /* PRM.CEFUSE_PRM register offsets */ +#define OMAP4_PM_CEFUSE_PWRSTCTRL_OFFSET 0x0000 #define OMAP4430_PM_CEFUSE_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0000) +#define OMAP4_PM_CEFUSE_PWRSTST_OFFSET 0x0004 #define OMAP4430_PM_CEFUSE_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0004) +#define OMAP4_RM_CEFUSE_CEFUSE_CONTEXT_OFFSET 0x0024 #define OMAP4430_RM_CEFUSE_CEFUSE_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0024) /* PRM.WKUP_PRM register offsets */ +#define OMAP4_RM_WKUP_L4WKUP_CONTEXT_OFFSET 0x0024 #define OMAP4430_RM_WKUP_L4WKUP_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0024) +#define OMAP4_RM_WKUP_WDT1_CONTEXT_OFFSET 0x002c #define OMAP4430_RM_WKUP_WDT1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x002c) +#define OMAP4_PM_WKUP_WDT2_WKDEP_OFFSET 0x0030 #define OMAP4430_PM_WKUP_WDT2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0030) +#define OMAP4_RM_WKUP_WDT2_CONTEXT_OFFSET 0x0034 #define OMAP4430_RM_WKUP_WDT2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0034) +#define OMAP4_PM_WKUP_GPIO1_WKDEP_OFFSET 0x0038 #define OMAP4430_PM_WKUP_GPIO1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0038) +#define OMAP4_RM_WKUP_GPIO1_CONTEXT_OFFSET 0x003c #define OMAP4430_RM_WKUP_GPIO1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x003c) +#define OMAP4_PM_WKUP_TIMER1_WKDEP_OFFSET 0x0040 #define OMAP4430_PM_WKUP_TIMER1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0040) +#define OMAP4_RM_WKUP_TIMER1_CONTEXT_OFFSET 0x0044 #define OMAP4430_RM_WKUP_TIMER1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0044) +#define OMAP4_PM_WKUP_TIMER12_WKDEP_OFFSET 0x0048 #define OMAP4430_PM_WKUP_TIMER12_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0048) +#define OMAP4_RM_WKUP_TIMER12_CONTEXT_OFFSET 0x004c #define OMAP4430_RM_WKUP_TIMER12_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x004c) +#define OMAP4_RM_WKUP_SYNCTIMER_CONTEXT_OFFSET 0x0054 #define OMAP4430_RM_WKUP_SYNCTIMER_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0054) +#define OMAP4_PM_WKUP_USIM_WKDEP_OFFSET 0x0058 #define OMAP4430_PM_WKUP_USIM_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0058) +#define OMAP4_RM_WKUP_USIM_CONTEXT_OFFSET 0x005c #define OMAP4430_RM_WKUP_USIM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x005c) +#define OMAP4_RM_WKUP_SARRAM_CONTEXT_OFFSET 0x0064 #define OMAP4430_RM_WKUP_SARRAM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0064) +#define OMAP4_PM_WKUP_KEYBOARD_WKDEP_OFFSET 0x0078 #define OMAP4430_PM_WKUP_KEYBOARD_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0078) +#define OMAP4_RM_WKUP_KEYBOARD_CONTEXT_OFFSET 0x007c #define OMAP4430_RM_WKUP_KEYBOARD_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x007c) +#define OMAP4_PM_WKUP_RTC_WKDEP_OFFSET 0x0080 #define OMAP4430_PM_WKUP_RTC_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0080) +#define OMAP4_RM_WKUP_RTC_CONTEXT_OFFSET 0x0084 #define OMAP4430_RM_WKUP_RTC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0084) /* PRM.WKUP_CM register offsets */ +#define OMAP4_CM_WKUP_CLKSTCTRL_OFFSET 0x0000 #define OMAP4430_CM_WKUP_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0000) +#define OMAP4_CM_WKUP_L4WKUP_CLKCTRL_OFFSET 0x0020 #define OMAP4430_CM_WKUP_L4WKUP_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0020) +#define OMAP4_CM_WKUP_WDT1_CLKCTRL_OFFSET 0x0028 #define OMAP4430_CM_WKUP_WDT1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0028) +#define OMAP4_CM_WKUP_WDT2_CLKCTRL_OFFSET 0x0030 #define OMAP4430_CM_WKUP_WDT2_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0030) +#define OMAP4_CM_WKUP_GPIO1_CLKCTRL_OFFSET 0x0038 #define OMAP4430_CM_WKUP_GPIO1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0038) +#define OMAP4_CM_WKUP_TIMER1_CLKCTRL_OFFSET 0x0040 #define OMAP4430_CM_WKUP_TIMER1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0040) +#define OMAP4_CM_WKUP_TIMER12_CLKCTRL_OFFSET 0x0048 #define OMAP4430_CM_WKUP_TIMER12_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0048) +#define OMAP4_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET 0x0050 #define OMAP4430_CM_WKUP_SYNCTIMER_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0050) +#define OMAP4_CM_WKUP_USIM_CLKCTRL_OFFSET 0x0058 #define OMAP4430_CM_WKUP_USIM_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0058) +#define OMAP4_CM_WKUP_SARRAM_CLKCTRL_OFFSET 0x0060 #define OMAP4430_CM_WKUP_SARRAM_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0060) +#define OMAP4_CM_WKUP_KEYBOARD_CLKCTRL_OFFSET 0x0078 #define OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0078) +#define OMAP4_CM_WKUP_RTC_CLKCTRL_OFFSET 0x0080 #define OMAP4430_CM_WKUP_RTC_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0080) +#define OMAP4_CM_WKUP_BANDGAP_CLKCTRL_OFFSET 0x0088 #define OMAP4430_CM_WKUP_BANDGAP_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0088) /* PRM.EMU_PRM register offsets */ +#define OMAP4_PM_EMU_PWRSTCTRL_OFFSET 0x0000 #define OMAP4430_PM_EMU_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0000) +#define OMAP4_PM_EMU_PWRSTST_OFFSET 0x0004 #define OMAP4430_PM_EMU_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0004) +#define OMAP4_RM_EMU_DEBUGSS_CONTEXT_OFFSET 0x0024 #define OMAP4430_RM_EMU_DEBUGSS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0024) /* PRM.EMU_CM register offsets */ +#define OMAP4_CM_EMU_CLKSTCTRL_OFFSET 0x0000 #define OMAP4430_CM_EMU_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0000) +#define OMAP4_CM_EMU_DYNAMICDEP_OFFSET 0x0008 #define OMAP4430_CM_EMU_DYNAMICDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0008) +#define OMAP4_CM_EMU_DEBUGSS_CLKCTRL_OFFSET 0x0020 #define OMAP4430_CM_EMU_DEBUGSS_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0020) /* PRM.DEVICE_PRM register offsets */ +#define OMAP4_PRM_RSTCTRL_OFFSET 0x0000 #define OMAP4430_PRM_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0000) +#define OMAP4_PRM_RSTST_OFFSET 0x0004 #define OMAP4430_PRM_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0004) +#define OMAP4_PRM_RSTTIME_OFFSET 0x0008 #define OMAP4430_PRM_RSTTIME OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0008) +#define OMAP4_PRM_CLKREQCTRL_OFFSET 0x000c #define OMAP4430_PRM_CLKREQCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x000c) +#define OMAP4_PRM_VOLTCTRL_OFFSET 0x0010 #define OMAP4430_PRM_VOLTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0010) +#define OMAP4_PRM_PWRREQCTRL_OFFSET 0x0014 #define OMAP4430_PRM_PWRREQCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0014) +#define OMAP4_PRM_PSCON_COUNT_OFFSET 0x0018 #define OMAP4430_PRM_PSCON_COUNT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0018) +#define OMAP4_PRM_IO_COUNT_OFFSET 0x001c #define OMAP4430_PRM_IO_COUNT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x001c) +#define OMAP4_PRM_IO_PMCTRL_OFFSET 0x0020 #define OMAP4430_PRM_IO_PMCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0020) +#define OMAP4_PRM_VOLTSETUP_WARMRESET_OFFSET 0x0024 #define OMAP4430_PRM_VOLTSETUP_WARMRESET OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0024) +#define OMAP4_PRM_VOLTSETUP_CORE_OFF_OFFSET 0x0028 #define OMAP4430_PRM_VOLTSETUP_CORE_OFF OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0028) +#define OMAP4_PRM_VOLTSETUP_MPU_OFF_OFFSET 0x002c #define OMAP4430_PRM_VOLTSETUP_MPU_OFF OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x002c) +#define OMAP4_PRM_VOLTSETUP_IVA_OFF_OFFSET 0x0030 #define OMAP4430_PRM_VOLTSETUP_IVA_OFF OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0030) +#define OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET 0x0034 #define OMAP4430_PRM_VOLTSETUP_CORE_RET_SLEEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0034) +#define OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET 0x0038 #define OMAP4430_PRM_VOLTSETUP_MPU_RET_SLEEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0038) +#define OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET 0x003c #define OMAP4430_PRM_VOLTSETUP_IVA_RET_SLEEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x003c) +#define OMAP4_PRM_VP_CORE_CONFIG_OFFSET 0x0040 #define OMAP4430_PRM_VP_CORE_CONFIG OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0040) +#define OMAP4_PRM_VP_CORE_STATUS_OFFSET 0x0044 #define OMAP4430_PRM_VP_CORE_STATUS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0044) +#define OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET 0x0048 #define OMAP4430_PRM_VP_CORE_VLIMITTO OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0048) +#define OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET 0x004c #define OMAP4430_PRM_VP_CORE_VOLTAGE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x004c) +#define OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET 0x0050 #define OMAP4430_PRM_VP_CORE_VSTEPMAX OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0050) +#define OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET 0x0054 #define OMAP4430_PRM_VP_CORE_VSTEPMIN OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0054) +#define OMAP4_PRM_VP_MPU_CONFIG_OFFSET 0x0058 #define OMAP4430_PRM_VP_MPU_CONFIG OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0058) +#define OMAP4_PRM_VP_MPU_STATUS_OFFSET 0x005c #define OMAP4430_PRM_VP_MPU_STATUS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x005c) +#define OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET 0x0060 #define OMAP4430_PRM_VP_MPU_VLIMITTO OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0060) +#define OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET 0x0064 #define OMAP4430_PRM_VP_MPU_VOLTAGE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0064) +#define OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET 0x0068 #define OMAP4430_PRM_VP_MPU_VSTEPMAX OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0068) +#define OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET 0x006c #define OMAP4430_PRM_VP_MPU_VSTEPMIN OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x006c) +#define OMAP4_PRM_VP_IVA_CONFIG_OFFSET 0x0070 #define OMAP4430_PRM_VP_IVA_CONFIG OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0070) +#define OMAP4_PRM_VP_IVA_STATUS_OFFSET 0x0074 #define OMAP4430_PRM_VP_IVA_STATUS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0074) +#define OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET 0x0078 #define OMAP4430_PRM_VP_IVA_VLIMITTO OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0078) +#define OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET 0x007c #define OMAP4430_PRM_VP_IVA_VOLTAGE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x007c) +#define OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET 0x0080 #define OMAP4430_PRM_VP_IVA_VSTEPMAX OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0080) +#define OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET 0x0084 #define OMAP4430_PRM_VP_IVA_VSTEPMIN OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0084) +#define OMAP4_PRM_VC_SMPS_SA_OFFSET 0x0088 #define OMAP4430_PRM_VC_SMPS_SA OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0088) +#define OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET 0x008c #define OMAP4430_PRM_VC_VAL_SMPS_RA_VOL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x008c) +#define OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET 0x0090 #define OMAP4430_PRM_VC_VAL_SMPS_RA_CMD OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0090) +#define OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET 0x0094 #define OMAP4430_PRM_VC_VAL_CMD_VDD_CORE_L OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0094) +#define OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET 0x0098 #define OMAP4430_PRM_VC_VAL_CMD_VDD_MPU_L OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0098) +#define OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET 0x009c #define OMAP4430_PRM_VC_VAL_CMD_VDD_IVA_L OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x009c) +#define OMAP4_PRM_VC_VAL_BYPASS_OFFSET 0x00a0 #define OMAP4430_PRM_VC_VAL_BYPASS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a0) +#define OMAP4_PRM_VC_CFG_CHANNEL_OFFSET 0x00a4 #define OMAP4430_PRM_VC_CFG_CHANNEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a4) +#define OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET 0x00a8 #define OMAP4430_PRM_VC_CFG_I2C_MODE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a8) +#define OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET 0x00ac #define OMAP4430_PRM_VC_CFG_I2C_CLK OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00ac) +#define OMAP4_PRM_SRAM_COUNT_OFFSET 0x00b0 #define OMAP4430_PRM_SRAM_COUNT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b0) +#define OMAP4_PRM_SRAM_WKUP_SETUP_OFFSET 0x00b4 #define OMAP4430_PRM_SRAM_WKUP_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b4) +#define OMAP4_PRM_LDO_SRAM_CORE_SETUP_OFFSET 0x00b8 #define OMAP4430_PRM_LDO_SRAM_CORE_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b8) +#define OMAP4_PRM_LDO_SRAM_CORE_CTRL_OFFSET 0x00bc #define OMAP4430_PRM_LDO_SRAM_CORE_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00bc) +#define OMAP4_PRM_LDO_SRAM_MPU_SETUP_OFFSET 0x00c0 #define OMAP4430_PRM_LDO_SRAM_MPU_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c0) +#define OMAP4_PRM_LDO_SRAM_MPU_CTRL_OFFSET 0x00c4 #define OMAP4430_PRM_LDO_SRAM_MPU_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c4) +#define OMAP4_PRM_LDO_SRAM_IVA_SETUP_OFFSET 0x00c8 #define OMAP4430_PRM_LDO_SRAM_IVA_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c8) +#define OMAP4_PRM_LDO_SRAM_IVA_CTRL_OFFSET 0x00cc #define OMAP4430_PRM_LDO_SRAM_IVA_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00cc) +#define OMAP4_PRM_LDO_ABB_MPU_SETUP_OFFSET 0x00d0 #define OMAP4430_PRM_LDO_ABB_MPU_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d0) +#define OMAP4_PRM_LDO_ABB_MPU_CTRL_OFFSET 0x00d4 #define OMAP4430_PRM_LDO_ABB_MPU_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d4) +#define OMAP4_PRM_LDO_ABB_IVA_SETUP_OFFSET 0x00d8 #define OMAP4430_PRM_LDO_ABB_IVA_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d8) +#define OMAP4_PRM_LDO_ABB_IVA_CTRL_OFFSET 0x00dc #define OMAP4430_PRM_LDO_ABB_IVA_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00dc) +#define OMAP4_PRM_LDO_BANDGAP_CTRL_OFFSET 0x00e0 #define OMAP4430_PRM_LDO_BANDGAP_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e0) +#define OMAP4_PRM_DEVICE_OFF_CTRL_OFFSET 0x00e4 #define OMAP4430_PRM_DEVICE_OFF_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e4) +#define OMAP4_PRM_PHASE1_CNDP_OFFSET 0x00e8 #define OMAP4430_PRM_PHASE1_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e8) +#define OMAP4_PRM_PHASE2A_CNDP_OFFSET 0x00ec #define OMAP4430_PRM_PHASE2A_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00ec) +#define OMAP4_PRM_PHASE2B_CNDP_OFFSET 0x00f0 #define OMAP4430_PRM_PHASE2B_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f0) +#define OMAP4_PRM_MODEM_IF_CTRL_OFFSET 0x00f4 #define OMAP4430_PRM_MODEM_IF_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f4) -/* CHIRON_PRCM */ - +/* + * PRCM_MPU + * + * The PRCM_MPU is a local PRCM inside the MPU subsystem. For the PRCM (global) + * point of view the PRCM_MPU is a single entity. It shares the same + * programming model as the global PRCM and thus can be assimilate as two new + * MOD inside the PRCM + */ -/* CHIRON_PRCM.CHIRONSS_OCP_SOCKET_PRCM register offsets */ -#define OMAP4430_REVISION_PRCM OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000) +/* PRCM_MPU.OCP_SOCKET_PRCM register offsets */ +#define OMAP4_REVISION_PRCM_OFFSET 0x0000 +#define OMAP4430_REVISION_PRCM OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_OCP_SOCKET_PRCM_MOD, 0x0000) -/* CHIRON_PRCM.CHIRONSS_DEVICE_PRM register offsets */ -#define OMAP4430_CHIRON_PRCM_PRM_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000) +/* PRCM_MPU.DEVICE_PRM register offsets */ +#define OMAP4_PRCM_MPU_PRM_RSTST_OFFSET 0x0000 +#define OMAP4430_PRCM_MPU_PRM_RSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_DEVICE_PRM_MOD, 0x0000) -/* CHIRON_PRCM.CHIRONSS_CPU0 register offsets */ -#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000) -#define OMAP4430_PM_PDA_CPU0_PWRSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004) -#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008) -#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c) -#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010) -#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014) -#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018) +/* PRCM_MPU.CPU0 register offsets */ +#define OMAP4_PM_CPU0_PWRSTCTRL_OFFSET 0x0000 +#define OMAP4430_PM_CPU0_PWRSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0000) +#define OMAP4_PM_CPU0_PWRSTST_OFFSET 0x0004 +#define OMAP4430_PM_CPU0_PWRSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0004) +#define OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET 0x0008 +#define OMAP4430_RM_CPU0_CPU0_CONTEXT OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0008) +#define OMAP4_RM_CPU0_CPU0_RSTCTRL_OFFSET 0x000c +#define OMAP4430_RM_CPU0_CPU0_RSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x000c) +#define OMAP4_RM_CPU0_CPU0_RSTST_OFFSET 0x0010 +#define OMAP4430_RM_CPU0_CPU0_RSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0010) +#define OMAP4_CM_CPU0_CPU0_CLKCTRL_OFFSET 0x0014 +#define OMAP4430_CM_CPU0_CPU0_CLKCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0014) +#define OMAP4_CM_CPU0_CLKSTCTRL_OFFSET 0x0018 +#define OMAP4430_CM_CPU0_CLKSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0018) -/* CHIRON_PRCM.CHIRONSS_CPU1 register offsets */ -#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000) -#define OMAP4430_PM_PDA_CPU1_PWRSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004) -#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008) -#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c) -#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010) -#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014) -#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018) +/* PRCM_MPU.CPU1 register offsets */ +#define OMAP4_PM_CPU1_PWRSTCTRL_OFFSET 0x0000 +#define OMAP4430_PM_CPU1_PWRSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0000) +#define OMAP4_PM_CPU1_PWRSTST_OFFSET 0x0004 +#define OMAP4430_PM_CPU1_PWRSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0004) +#define OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET 0x0008 +#define OMAP4430_RM_CPU1_CPU1_CONTEXT OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0008) +#define OMAP4_RM_CPU1_CPU1_RSTCTRL_OFFSET 0x000c +#define OMAP4430_RM_CPU1_CPU1_RSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x000c) +#define OMAP4_RM_CPU1_CPU1_RSTST_OFFSET 0x0010 +#define OMAP4430_RM_CPU1_CPU1_RSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0010) +#define OMAP4_CM_CPU1_CPU1_CLKCTRL_OFFSET 0x0014 +#define OMAP4430_CM_CPU1_CPU1_CLKCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0014) +#define OMAP4_CM_CPU1_CLKSTCTRL_OFFSET 0x0018 +#define OMAP4430_CM_CPU1_CLKSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0018) #endif diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h index 091c98a639d9..cd3983ad4160 100644 --- a/arch/arm/mach-s3c2410/include/mach/map.h +++ b/arch/arm/mach-s3c2410/include/mach/map.h @@ -114,6 +114,7 @@ #define S3C_PA_USBHOST S3C2410_PA_USBHOST #define S3C_PA_HSMMC0 S3C2443_PA_HSMMC #define S3C_PA_HSMMC1 S3C2416_PA_HSMMC0 +#define S3C_PA_WDT S3C2410_PA_WATCHDOG #define S3C_PA_NAND S3C24XX_PA_NAND #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 69e9fbfea917..f5a59727949f 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -7,6 +7,7 @@ config PLAT_S3C64XX bool depends on ARCH_S3C64XX + select SAMSUNG_WAKEMASK default y help Base platform code for any Samsung S3C64XX device @@ -35,6 +36,11 @@ config S3C64XX_SETUP_SDHCI Internal configuration for default SDHCI setup for S3C6400 and S3C6410 SoCs. +config S3C64XX_DEV_ONENAND1 + bool + help + Compile in platform device definition for OneNAND1 controller + # platform specific device setup config S3C64XX_SETUP_I2C0 @@ -90,8 +96,11 @@ config MACH_SMDK6410 select S3C_DEV_HSMMC1 select S3C_DEV_I2C1 select S3C_DEV_FB + select SAMSUNG_DEV_TS select S3C_DEV_USB_HOST select S3C_DEV_USB_HSOTG + select S3C_DEV_WDT + select HAVE_S3C2410_WATCHDOG select S3C64XX_SETUP_SDHCI select S3C64XX_SETUP_I2C1 select S3C64XX_SETUP_FB_24BPP @@ -179,3 +188,34 @@ config MACH_HMT select HAVE_PWM help Machine support for the Airgoo HMT + +config MACH_SMARTQ + bool + select CPU_S3C6410 + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_FB + select S3C_DEV_HWMON + select S3C_DEV_RTC + select S3C_DEV_USB_HSOTG + select S3C_DEV_USB_HOST + select S3C64XX_SETUP_SDHCI + select S3C64XX_SETUP_FB_24BPP + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_TS + select HAVE_PWM + help + Shared machine support for SmartQ 5/7 + +config MACH_SMARTQ5 + bool "SmartQ 5" + select MACH_SMARTQ + help + Machine support for the SmartQ 5 + +config MACH_SMARTQ7 + bool "SmartQ 7" + select MACH_SMARTQ + help + Machine support for the SmartQ 7 diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index a10f1fc6b023..9d1006938f5c 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -52,6 +52,9 @@ obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o obj-$(CONFIG_MACH_NCP) += mach-ncp.o obj-$(CONFIG_MACH_HMT) += mach-hmt.o +obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o +obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o +obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o # device support @@ -59,3 +62,4 @@ obj-y += dev-uart.o obj-y += dev-audio.o obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o obj-$(CONFIG_S3C64XX_DEV_TS) += dev-ts.o +obj-$(CONFIG_S3C64XX_DEV_ONENAND1) += dev-onenand1.o diff --git a/arch/arm/mach-s3c64xx/dev-onenand1.c b/arch/arm/mach-s3c64xx/dev-onenand1.c new file mode 100644 index 000000000000..92ffd5bac104 --- /dev/null +++ b/arch/arm/mach-s3c64xx/dev-onenand1.c @@ -0,0 +1,55 @@ +/* + * linux/arch/arm/mach-s3c64xx/dev-onenand1.c + * + * Copyright (c) 2008-2010 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * S3C64XX series device definition for OneNAND devices + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/onenand.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +static struct resource s3c64xx_onenand1_resources[] = { + [0] = { + .start = S3C64XX_PA_ONENAND1, + .end = S3C64XX_PA_ONENAND1 + 0x400 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = S3C64XX_PA_ONENAND1_BUF, + .end = S3C64XX_PA_ONENAND1_BUF + S3C64XX_SZ_ONENAND1_BUF - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = IRQ_ONENAND1, + .end = IRQ_ONENAND1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c64xx_device_onenand1 = { + .name = "samsung-onenand", + .id = 1, + .num_resources = ARRAY_SIZE(s3c64xx_onenand1_resources), + .resource = s3c64xx_onenand1_resources, +}; + +void s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata) +{ + struct onenand_platform_data *pd; + + pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL); + if (!pd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + s3c64xx_device_onenand1.dev.platform_data = pd; +} diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h index e9ab4ac0b9a8..8e2df26cf14a 100644 --- a/arch/arm/mach-s3c64xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h @@ -212,5 +212,9 @@ #define NR_IRQS (IRQ_BOARD_END + 1) +/* Compatibility */ + +#define IRQ_ONENAND IRQ_ONENAND0 + #endif /* __ASM_MACH_S3C64XX_IRQS_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h index 9fdd50c8c767..e1eab3c94aea 100644 --- a/arch/arm/mach-s3c64xx/include/mach/map.h +++ b/arch/arm/mach-s3c64xx/include/mach/map.h @@ -52,6 +52,16 @@ #define S3C64XX_PA_SROM (0x70000000) +#define S3C64XX_PA_ONENAND0 (0x70100000) +#define S3C64XX_PA_ONENAND0_BUF (0x20000000) +#define S3C64XX_SZ_ONENAND0_BUF (SZ_64M) + +/* NAND and OneNAND1 controllers occupy the same register region + (depending on SoC POP version) */ +#define S3C64XX_PA_ONENAND1 (0x70200000) +#define S3C64XX_PA_ONENAND1_BUF (0x28000000) +#define S3C64XX_SZ_ONENAND1_BUF (SZ_64M) + #define S3C64XX_PA_NAND (0x70200000) #define S3C64XX_PA_FB (0x77100000) #define S3C64XX_PA_USB_HSOTG (0x7C000000) @@ -99,11 +109,15 @@ #define S3C_PA_IIC S3C64XX_PA_IIC0 #define S3C_PA_IIC1 S3C64XX_PA_IIC1 #define S3C_PA_NAND S3C64XX_PA_NAND +#define S3C_PA_ONENAND S3C64XX_PA_ONENAND0 +#define S3C_PA_ONENAND_BUF S3C64XX_PA_ONENAND0_BUF +#define S3C_SZ_ONENAND_BUF S3C64XX_SZ_ONENAND0_BUF #define S3C_PA_FB S3C64XX_PA_FB #define S3C_PA_USBHOST S3C64XX_PA_USBHOST #define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG #define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY #define S3C_PA_RTC S3C64XX_PA_RTC +#define S3C_PA_WDT S3C64XX_PA_WATCHDOG #define SAMSUNG_PA_ADC S3C64XX_PA_ADC diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c new file mode 100644 index 000000000000..028d080dcd35 --- /dev/null +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -0,0 +1,363 @@ +/* + * linux/arch/arm/mach-s3c64xx/mach-smartq.c + * + * Copyright (C) 2010 Maurus Cuelenaere + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/delay.h> +#include <linux/fb.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pwm_backlight.h> +#include <linux/serial_core.h> +#include <linux/usb/gpio_vbus.h> + +#include <asm/mach-types.h> +#include <asm/mach/map.h> + +#include <mach/map.h> +#include <mach/regs-gpio.h> +#include <mach/regs-modem.h> + +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/iic.h> +#include <plat/gpio-cfg.h> +#include <plat/hwmon.h> +#include <plat/regs-serial.h> +#include <plat/udc-hs.h> +#include <plat/usb-control.h> +#include <plat/sdhci.h> +#include <plat/ts.h> + +#include <video/platform_lcd.h> + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE) +#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) + +static struct s3c2410_uartcfg smartq_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, +}; + +static void smartq_usb_host_powercontrol(int port, int to) +{ + pr_debug("%s(%d, %d)\n", __func__, port, to); + + if (port == 0) { + gpio_set_value(S3C64XX_GPL(0), to); + gpio_set_value(S3C64XX_GPL(1), to); + } +} + +static irqreturn_t smartq_usb_host_ocirq(int irq, void *pw) +{ + struct s3c2410_hcd_info *info = pw; + + if (gpio_get_value(S3C64XX_GPL(10)) == 0) { + pr_debug("%s: over-current irq (oc detected)\n", __func__); + s3c2410_usb_report_oc(info, 3); + } else { + pr_debug("%s: over-current irq (oc cleared)\n", __func__); + s3c2410_usb_report_oc(info, 0); + } + + return IRQ_HANDLED; +} + +static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on) +{ + int ret; + + /* This isn't present on a SmartQ 5 board */ + if (machine_is_smartq5()) + return; + + if (on) { + ret = request_irq(gpio_to_irq(S3C64XX_GPL(10)), + smartq_usb_host_ocirq, IRQF_DISABLED | + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "USB host overcurrent", info); + if (ret != 0) + pr_err("failed to request usb oc irq: %d\n", ret); + } else { + free_irq(gpio_to_irq(S3C64XX_GPL(10)), info); + } +} + +static struct s3c2410_hcd_info smartq_usb_host_info = { + .port[0] = { + .flags = S3C_HCDFLG_USED + }, + .port[1] = { + .flags = 0 + }, + + .power_control = smartq_usb_host_powercontrol, + .enable_oc = smartq_usb_host_enableoc, +}; + +static struct gpio_vbus_mach_info smartq_usb_otg_vbus_pdata = { + .gpio_vbus = S3C64XX_GPL(9), + .gpio_pullup = -1, + .gpio_vbus_inverted = true, +}; + +static struct platform_device smartq_usb_otg_vbus_dev = { + .name = "gpio-vbus", + .dev.platform_data = &smartq_usb_otg_vbus_pdata, +}; + +static int __init smartq_bl_init(struct device *dev) +{ + s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2)); + + return 0; +} + +static struct platform_pwm_backlight_data smartq_backlight_data = { + .pwm_id = 1, + .max_brightness = 1000, + .dft_brightness = 600, + .pwm_period_ns = 1000000000 / (1000 * 20), + .init = smartq_bl_init, +}; + +static struct platform_device smartq_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[1].dev, + .platform_data = &smartq_backlight_data, + }, +}; + +static struct s3c2410_ts_mach_info smartq_touchscreen_pdata __initdata = { + .delay = 65535, + .presc = 99, + .oversampling_shift = 4, +}; + +static struct s3c_sdhci_platdata smartq_internal_hsmmc_pdata = { + .max_width = 4, + /*.broken_card_detection = true,*/ +}; + +static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = { + /* Battery voltage (?-4.2V) */ + .in[0] = &(struct s3c_hwmon_chcfg) { + .name = "smartq:battery-voltage", + .mult = 3300, + .div = 2048, + }, + /* Reference voltage (1.2V) */ + .in[1] = &(struct s3c_hwmon_chcfg) { + .name = "smartq:reference-voltage", + .mult = 3300, + .div = 4096, + }, +}; + +static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) +{ + gpio_direction_output(S3C64XX_GPM(3), power); +} + +static struct plat_lcd_data smartq_lcd_power_data = { + .set_power = smartq_lcd_power_set, +}; + +static struct platform_device smartq_lcd_power_device = { + .name = "platform-lcd", + .dev.parent = &s3c_device_fb.dev, + .dev.platform_data = &smartq_lcd_power_data, +}; + + +static struct platform_device *smartq_devices[] __initdata = { + &s3c_device_hsmmc1, /* Init iNAND first, ... */ + &s3c_device_hsmmc0, /* ... then the external SD card */ + &s3c_device_hsmmc2, + &s3c_device_adc, + &s3c_device_fb, + &s3c_device_hwmon, + &s3c_device_i2c0, + &s3c_device_ohci, + &s3c_device_rtc, + &s3c_device_timer[1], + &s3c_device_ts, + &s3c_device_usb_hsotg, + &smartq_backlight_device, + &smartq_lcd_power_device, + &smartq_usb_otg_vbus_dev, +}; + +static void __init smartq_lcd_mode_set(void) +{ + u32 tmp; + + /* set the LCD type */ + tmp = __raw_readl(S3C64XX_SPCON); + tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK; + tmp |= S3C64XX_SPCON_LCD_SEL_RGB; + __raw_writel(tmp, S3C64XX_SPCON); + + /* remove the LCD bypass */ + tmp = __raw_readl(S3C64XX_MODEM_MIFPCON); + tmp &= ~MIFPCON_LCD_BYPASS; + __raw_writel(tmp, S3C64XX_MODEM_MIFPCON); +} + +static void smartq_power_off(void) +{ + gpio_direction_output(S3C64XX_GPK(15), 1); +} + +static int __init smartq_power_off_init(void) +{ + int ret; + + ret = gpio_request(S3C64XX_GPK(15), "Power control"); + if (ret < 0) { + pr_err("%s: failed to get GPK15\n", __func__); + return ret; + } + + /* leave power on */ + gpio_direction_output(S3C64XX_GPK(15), 0); + + + pm_power_off = smartq_power_off; + + return ret; +} + +static int __init smartq_usb_host_init(void) +{ + int ret; + + ret = gpio_request(S3C64XX_GPL(0), "USB power control"); + if (ret < 0) { + pr_err("%s: failed to get GPL0\n", __func__); + return ret; + } + + ret = gpio_request(S3C64XX_GPL(1), "USB host power control"); + if (ret < 0) { + pr_err("%s: failed to get GPL1\n", __func__); + goto err; + } + + if (!machine_is_smartq5()) { + /* This isn't present on a SmartQ 5 board */ + ret = gpio_request(S3C64XX_GPL(10), "USB host overcurrent"); + if (ret < 0) { + pr_err("%s: failed to get GPL10\n", __func__); + goto err2; + } + } + + /* turn power off */ + gpio_direction_output(S3C64XX_GPL(0), 0); + gpio_direction_output(S3C64XX_GPL(1), 0); + if (!machine_is_smartq5()) + gpio_direction_input(S3C64XX_GPL(10)); + + s3c_device_ohci.dev.platform_data = &smartq_usb_host_info; + + return 0; + +err2: + gpio_free(S3C64XX_GPL(1)); +err: + gpio_free(S3C64XX_GPL(0)); + return ret; +} + +static int __init smartq_usb_otg_init(void) +{ + clk_xusbxti.rate = 12000000; + + return 0; +} + +static int __init smartq_wifi_init(void) +{ + int ret; + + ret = gpio_request(S3C64XX_GPK(1), "wifi control"); + if (ret < 0) { + pr_err("%s: failed to get GPK1\n", __func__); + return ret; + } + + ret = gpio_request(S3C64XX_GPK(2), "wifi reset"); + if (ret < 0) { + pr_err("%s: failed to get GPK2\n", __func__); + gpio_free(S3C64XX_GPK(1)); + return ret; + } + + /* turn power on */ + gpio_direction_output(S3C64XX_GPK(1), 1); + + /* reset device */ + gpio_direction_output(S3C64XX_GPK(2), 0); + mdelay(100); + gpio_set_value(S3C64XX_GPK(2), 1); + gpio_direction_input(S3C64XX_GPK(2)); + + return 0; +} + +static struct map_desc smartq_iodesc[] __initdata = {}; +void __init smartq_map_io(void) +{ + s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc)); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs)); + + smartq_lcd_mode_set(); +} + +void __init smartq_machine_init(void) +{ + s3c_i2c0_set_platdata(NULL); + s3c_hwmon_set_platdata(&smartq_hwmon_pdata); + s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata); + s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata); + s3c24xx_ts_set_platdata(&smartq_touchscreen_pdata); + + WARN_ON(smartq_power_off_init()); + WARN_ON(smartq_usb_host_init()); + WARN_ON(smartq_usb_otg_init()); + WARN_ON(smartq_wifi_init()); + + platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices)); +} diff --git a/arch/arm/mach-s3c64xx/mach-smartq.h b/arch/arm/mach-s3c64xx/mach-smartq.h new file mode 100644 index 000000000000..8e8b693db3af --- /dev/null +++ b/arch/arm/mach-s3c64xx/mach-smartq.h @@ -0,0 +1,20 @@ +/* + * linux/arch/arm/mach-s3c64xx/mach-smartq.h + * + * Copyright (C) 2010 Maurus Cuelenaere + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __MACH_SMARTQ_H +#define __MACH_SMARTQ_H __FILE__ + +#include <linux/init.h> + +extern void __init smartq_map_io(void); +extern void __init smartq_machine_init(void); + +#endif /* __MACH_SMARTQ_H */ diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c new file mode 100644 index 000000000000..1d0326ead90f --- /dev/null +++ b/arch/arm/mach-s3c64xx/mach-smartq5.c @@ -0,0 +1,185 @@ +/* + * linux/arch/arm/mach-s3c64xx/mach-smartq5.c + * + * Copyright (C) 2010 Maurus Cuelenaere + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/fb.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/i2c-gpio.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/leds.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/map.h> +#include <mach/regs-fb.h> +#include <mach/regs-gpio.h> +#include <mach/s3c6410.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/fb.h> +#include <plat/gpio-cfg.h> + +#include "mach-smartq.h" + +static void __init smartq5_lcd_setup_gpio(void) +{ + gpio_request(S3C64XX_GPM(0), "LCD SCEN pin"); + gpio_request(S3C64XX_GPM(1), "LCD SCL pin"); + gpio_request(S3C64XX_GPM(2), "LCD SDA pin"); + gpio_request(S3C64XX_GPM(3), "LCD power"); + + /* turn power off */ + gpio_direction_output(S3C64XX_GPM(0), 1); + gpio_direction_input(S3C64XX_GPM(1)); + gpio_direction_input(S3C64XX_GPM(2)); + gpio_direction_output(S3C64XX_GPM(3), 0); +} + +static struct i2c_gpio_platform_data smartq5_lcd_control = { + .sda_pin = S3C64XX_GPM(2), + .scl_pin = S3C64XX_GPM(1), +}; + +static struct platform_device smartq5_lcd_control_device = { + .name = "i2c-gpio", + .id = 1, + .dev.platform_data = &smartq5_lcd_control, +}; + +static struct gpio_led smartq5_leds[] __initdata = { + { + .name = "smartq5:green", + .active_low = 1, + .gpio = S3C64XX_GPN(8), + }, + { + .name = "smartq5:red", + .active_low = 1, + .gpio = S3C64XX_GPN(9), + }, +}; + +static struct gpio_led_platform_data smartq5_led_data = { + .num_leds = ARRAY_SIZE(smartq5_leds), + .leds = smartq5_leds, +}; + +static struct platform_device smartq5_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &smartq5_led_data, +}; + +/* Labels according to the SmartQ manual */ +static struct gpio_keys_button smartq5_buttons[] = { + { + .gpio = S3C64XX_GPL(14), + .code = KEY_POWER, + .desc = "Power", + .active_low = 1, + .debounce_interval = 5, + .type = EV_KEY, + }, + { + .gpio = S3C64XX_GPN(2), + .code = KEY_KPMINUS, + .desc = "Minus", + .active_low = 1, + .debounce_interval = 5, + .type = EV_KEY, + }, + { + .gpio = S3C64XX_GPN(12), + .code = KEY_KPPLUS, + .desc = "Plus", + .active_low = 1, + .debounce_interval = 5, + .type = EV_KEY, + }, + { + .gpio = S3C64XX_GPN(15), + .code = KEY_ENTER, + .desc = "Move", + .active_low = 1, + .debounce_interval = 5, + .type = EV_KEY, + }, +}; + +static struct gpio_keys_platform_data smartq5_buttons_data = { + .buttons = smartq5_buttons, + .nbuttons = ARRAY_SIZE(smartq5_buttons), +}; + +static struct platform_device smartq5_buttons_device = { + .name = "gpio-keys", + .id = 0, + .num_resources = 0, + .dev = { + .platform_data = &smartq5_buttons_data, + } +}; + +static struct s3c_fb_pd_win smartq5_fb_win0 = { + .win_mode = { + .pixclock = 1000000000000ULL / + ((40+1+216+800)*(10+1+35+480)*80), + .left_margin = 40, + .right_margin = 216, + .upper_margin = 10, + .lower_margin = 35, + .hsync_len = 1, + .vsync_len = 1, + .xres = 800, + .yres = 480, + }, + .max_bpp = 32, + .default_bpp = 16, +}; + +static struct s3c_fb_platdata smartq5_lcd_pdata __initdata = { + .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, + .win[0] = &smartq5_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | + VIDCON1_INV_VDEN, +}; + +static struct platform_device *smartq5_devices[] __initdata = { + &smartq5_leds_device, + &smartq5_buttons_device, + &smartq5_lcd_control_device, +}; + +static void __init smartq5_machine_init(void) +{ + s3c_fb_set_platdata(&smartq5_lcd_pdata); + + smartq_machine_init(); + smartq5_lcd_setup_gpio(); + + platform_add_devices(smartq5_devices, ARRAY_SIZE(smartq5_devices)); +} + +MACHINE_START(SMARTQ5, "SmartQ 5") + /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C64XX_PA_SDRAM + 0x100, + .init_irq = s3c6410_init_irq, + .map_io = smartq_map_io, + .init_machine = smartq5_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c new file mode 100644 index 000000000000..e0bc78ecb156 --- /dev/null +++ b/arch/arm/mach-s3c64xx/mach-smartq7.c @@ -0,0 +1,201 @@ +/* + * linux/arch/arm/mach-s3c64xx/mach-smartq7.c + * + * Copyright (C) 2010 Maurus Cuelenaere + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/fb.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/i2c-gpio.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/leds.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/map.h> +#include <mach/regs-fb.h> +#include <mach/regs-gpio.h> +#include <mach/s3c6410.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/fb.h> +#include <plat/gpio-cfg.h> + +#include "mach-smartq.h" + +static void __init smartq7_lcd_setup_gpio(void) +{ + gpio_request(S3C64XX_GPM(0), "LCD CSB pin"); + gpio_request(S3C64XX_GPM(3), "LCD power"); + gpio_request(S3C64XX_GPM(4), "LCD power status"); + + /* turn power off */ + gpio_direction_output(S3C64XX_GPM(0), 1); + gpio_direction_output(S3C64XX_GPM(3), 0); + gpio_direction_input(S3C64XX_GPM(4)); +} + +static struct i2c_gpio_platform_data smartq7_lcd_control = { + .sda_pin = S3C64XX_GPM(2), + .scl_pin = S3C64XX_GPM(1), + .sda_is_open_drain = 1, + .scl_is_open_drain = 1, +}; + +static struct platform_device smartq7_lcd_control_device = { + .name = "i2c-gpio", + .id = 1, + .dev.platform_data = &smartq7_lcd_control, +}; + +static struct gpio_led smartq7_leds[] __initdata = { + { + .name = "smartq7:red", + .active_low = 1, + .gpio = S3C64XX_GPN(8), + }, + { + .name = "smartq7:green", + .active_low = 1, + .gpio = S3C64XX_GPN(9), + }, +}; + +static struct gpio_led_platform_data smartq7_led_data = { + .num_leds = ARRAY_SIZE(smartq7_leds), + .leds = smartq7_leds, +}; + +static struct platform_device smartq7_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &smartq7_led_data, +}; + +/* Labels according to the SmartQ manual */ +static struct gpio_keys_button smartq7_buttons[] = { + { + .gpio = S3C64XX_GPL(14), + .code = KEY_POWER, + .desc = "Power", + .active_low = 1, + .debounce_interval = 5, + .type = EV_KEY, + }, + { + .gpio = S3C64XX_GPN(2), + .code = KEY_FN, + .desc = "Function", + .active_low = 1, + .debounce_interval = 5, + .type = EV_KEY, + }, + { + .gpio = S3C64XX_GPN(3), + .code = KEY_KPMINUS, + .desc = "Minus", + .active_low = 1, + .debounce_interval = 5, + .type = EV_KEY, + }, + { + .gpio = S3C64XX_GPN(4), + .code = KEY_KPPLUS, + .desc = "Plus", + .active_low = 1, + .debounce_interval = 5, + .type = EV_KEY, + }, + { + .gpio = S3C64XX_GPN(12), + .code = KEY_ENTER, + .desc = "Enter", + .active_low = 1, + .debounce_interval = 5, + .type = EV_KEY, + }, + { + .gpio = S3C64XX_GPN(15), + .code = KEY_ESC, + .desc = "Cancel", + .active_low = 1, + .debounce_interval = 5, + .type = EV_KEY, + }, +}; + +static struct gpio_keys_platform_data smartq7_buttons_data = { + .buttons = smartq7_buttons, + .nbuttons = ARRAY_SIZE(smartq7_buttons), +}; + +static struct platform_device smartq7_buttons_device = { + .name = "gpio-keys", + .id = 0, + .num_resources = 0, + .dev = { + .platform_data = &smartq7_buttons_data, + } +}; + +static struct s3c_fb_pd_win smartq7_fb_win0 = { + .win_mode = { + .pixclock = 1000000000000ULL / + ((3+10+5+800)*(1+3+20+480)*80), + .left_margin = 3, + .right_margin = 5, + .upper_margin = 1, + .lower_margin = 20, + .hsync_len = 10, + .vsync_len = 3, + .xres = 800, + .yres = 480, + }, + .max_bpp = 32, + .default_bpp = 16, +}; + +static struct s3c_fb_platdata smartq7_lcd_pdata __initdata = { + .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, + .win[0] = &smartq7_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | + VIDCON1_INV_VCLK, +}; + +static struct platform_device *smartq7_devices[] __initdata = { + &smartq7_leds_device, + &smartq7_buttons_device, + &smartq7_lcd_control_device, +}; + +static void __init smartq7_machine_init(void) +{ + s3c_fb_set_platdata(&smartq7_lcd_pdata); + + smartq_machine_init(); + smartq7_lcd_setup_gpio(); + + platform_add_devices(smartq7_devices, ARRAY_SIZE(smartq7_devices)); +} + +MACHINE_START(SMARTQ7, "SmartQ 7") + /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C64XX_PA_SDRAM + 0x100, + .init_irq = s3c6410_init_irq, + .map_io = smartq_map_io, + .init_machine = smartq7_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 9d51455feb31..d9a03555f88b 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -64,6 +64,8 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/adc.h> +#include <plat/ts.h> #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB @@ -262,6 +264,9 @@ static struct platform_device *smdk6410_devices[] __initdata = { &smdk6410_lcd_powerdev, &smdk6410_smsc911x, + &s3c_device_adc, + &s3c_device_ts, + &s3c_device_wdt, }; #ifdef CONFIG_REGULATOR @@ -596,6 +601,12 @@ static struct i2c_board_info i2c_devs1[] __initdata = { { I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */ }; +static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, +}; + static void __init smdk6410_map_io(void) { u32 tmp; @@ -625,6 +636,8 @@ static void __init smdk6410_machine_init(void) s3c_i2c1_set_platdata(NULL); s3c_fb_set_platdata(&smdk6410_lcd_pdata); + s3c24xx_ts_set_platdata(&s3c_ts_platform); + /* configure nCS1 width to 16 bits */ cs1 = __raw_readl(S3C64XX_SROM_BW) & diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index b8ac4597fad7..79412f735a8d 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -18,8 +18,11 @@ #include <linux/io.h> #include <mach/map.h> +#include <mach/irqs.h> #include <plat/pm.h> +#include <plat/wakeup-mask.h> + #include <mach/regs-sys.h> #include <mach/regs-gpio.h> #include <mach/regs-clock.h> @@ -153,8 +156,25 @@ static void s3c64xx_cpu_suspend(void) panic("sleep resumed to originator?"); } +/* mapping of interrupts to parts of the wakeup mask */ +static struct samsung_wakeup_mask wake_irqs[] = { + { .irq = IRQ_RTC_ALARM, .bit = S3C64XX_PWRCFG_RTC_ALARM_DISABLE, }, + { .irq = IRQ_RTC_TIC, .bit = S3C64XX_PWRCFG_RTC_TICK_DISABLE, }, + { .irq = IRQ_PENDN, .bit = S3C64XX_PWRCFG_TS_DISABLE, }, + { .irq = IRQ_HSMMC0, .bit = S3C64XX_PWRCFG_MMC0_DISABLE, }, + { .irq = IRQ_HSMMC1, .bit = S3C64XX_PWRCFG_MMC1_DISABLE, }, + { .irq = IRQ_HSMMC2, .bit = S3C64XX_PWRCFG_MMC2_DISABLE, }, + { .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_BATF_DISABLE}, + { .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_MSM_DISABLE }, + { .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_HSI_DISABLE }, + { .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_MSM_DISABLE }, +}; + static void s3c64xx_pm_prepare(void) { + samsung_sync_wakemask(S3C64XX_PWR_CFG, + wake_irqs, ARRAY_SIZE(wake_irqs)); + /* store address of resume. */ __raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0); diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 707e34e3afd1..5e93fe3f3f40 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -37,6 +37,7 @@ #include <plat/clock.h> #include <plat/sdhci.h> #include <plat/iic-core.h> +#include <plat/onenand-core.h> #include <mach/s3c6400.h> void __init s3c6400_map_io(void) @@ -51,6 +52,9 @@ void __init s3c6400_map_io(void) s3c_i2c0_setname("s3c2440-i2c"); s3c_device_nand.name = "s3c6400-nand"; + + s3c_onenand_setname("s3c6400-onenand"); + s3c64xx_onenand1_setname("s3c6400-onenand"); } void __init s3c6400_init_clocks(int xtal) diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c index 3ab695c691ee..014401c39f36 100644 --- a/arch/arm/mach-s3c64xx/s3c6410.c +++ b/arch/arm/mach-s3c64xx/s3c6410.c @@ -39,6 +39,7 @@ #include <plat/sdhci.h> #include <plat/iic-core.h> #include <plat/adc.h> +#include <plat/onenand-core.h> #include <mach/s3c6400.h> #include <mach/s3c6410.h> @@ -55,6 +56,8 @@ void __init s3c6410_map_io(void) s3c_device_adc.name = "s3c64xx-adc"; s3c_device_nand.name = "s3c6400-nand"; + s3c_onenand_setname("s3c6410-onenand"); + s3c64xx_onenand1_setname("s3c6410-onenand"); } void __init s3c6410_init_clocks(int xtal) diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig index 77aeffd17330..f066fae07c57 100644 --- a/arch/arm/mach-s5p6440/Kconfig +++ b/arch/arm/mach-s5p6440/Kconfig @@ -16,6 +16,10 @@ config CPU_S5P6440 config MACH_SMDK6440 bool "SMDK6440" select CPU_S5P6440 + select SAMSUNG_DEV_TS + select SAMSUNG_DEV_ADC + select S3C_DEV_WDT + select HAVE_S3C2410_WATCHDOG help Machine support for the Samsung SMDK6440 diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile index 44facf43d59f..be3c53aab23f 100644 --- a/arch/arm/mach-s5p6440/Makefile +++ b/arch/arm/mach-s5p6440/Makefile @@ -21,3 +21,4 @@ obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o # device support obj-y += dev-audio.o +obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c index ca3b3206e6f8..b2fe6a58155a 100644 --- a/arch/arm/mach-s5p6440/cpu.c +++ b/arch/arm/mach-s5p6440/cpu.c @@ -61,6 +61,7 @@ static void s5p6440_idle(void) void __init s5p6440_map_io(void) { /* initialize any device information early */ + s3c_device_adc.name = "s3c64xx-adc"; } void __init s5p6440_init_clocks(int xtal) diff --git a/arch/arm/mach-s5p6440/dev-spi.c b/arch/arm/mach-s5p6440/dev-spi.c new file mode 100644 index 000000000000..0a30280019c0 --- /dev/null +++ b/arch/arm/mach-s5p6440/dev-spi.c @@ -0,0 +1,176 @@ +/* linux/arch/arm/mach-s5p6440/dev-spi.c + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <mach/dma.h> +#include <mach/map.h> +#include <mach/irqs.h> +#include <mach/gpio.h> +#include <mach/spi-clocks.h> + +#include <plat/s3c64xx-spi.h> +#include <plat/gpio-cfg.h> + +static char *spi_src_clks[] = { + [S5P6440_SPI_SRCCLK_PCLK] = "pclk", + [S5P6440_SPI_SRCCLK_SCLK] = "spi_epll", +}; + +/* SPI Controller platform_devices */ + +/* Since we emulate multi-cs capability, we do not touch the CS. + * The emulated CS is toggled by board specific mechanism, as it can + * be either some immediate GPIO or some signal out of some other + * chip in between ... or some yet another way. + * We simply do not assume anything about CS. + */ +static int s5p6440_spi_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP); + break; + + case 1: + s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP); + break; + + default: + dev_err(&pdev->dev, "Invalid SPI Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct resource s5p6440_spi0_resource[] = { + [0] = { + .start = S5P6440_PA_SPI0, + .end = S5P6440_PA_SPI0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI0_TX, + .end = DMACH_SPI0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI0_RX, + .end = DMACH_SPI0_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI0, + .end = IRQ_SPI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64xx_spi_info s5p6440_spi0_pdata = { + .cfg_gpio = s5p6440_spi_cfg_gpio, + .fifo_lvl_mask = 0x1ff, + .rx_lvl_offset = 15, +}; + +static u64 spi_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5p6440_device_spi0 = { + .name = "s3c64xx-spi", + .id = 0, + .num_resources = ARRAY_SIZE(s5p6440_spi0_resource), + .resource = s5p6440_spi0_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5p6440_spi0_pdata, + }, +}; + +static struct resource s5p6440_spi1_resource[] = { + [0] = { + .start = S5P6440_PA_SPI1, + .end = S5P6440_PA_SPI1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI1_TX, + .end = DMACH_SPI1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI1_RX, + .end = DMACH_SPI1_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI1, + .end = IRQ_SPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64xx_spi_info s5p6440_spi1_pdata = { + .cfg_gpio = s5p6440_spi_cfg_gpio, + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 15, +}; + +struct platform_device s5p6440_device_spi1 = { + .name = "s3c64xx-spi", + .id = 1, + .num_resources = ARRAY_SIZE(s5p6440_spi1_resource), + .resource = s5p6440_spi1_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5p6440_spi1_pdata, + }, +}; + +void __init s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) +{ + struct s3c64xx_spi_info *pd; + + /* Reject invalid configuration */ + if (!num_cs || src_clk_nr < 0 + || src_clk_nr > S5P6440_SPI_SRCCLK_SCLK) { + printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); + return; + } + + switch (cntrlr) { + case 0: + pd = &s5p6440_spi0_pdata; + break; + case 1: + pd = &s5p6440_spi1_pdata; + break; + default: + printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", + __func__, cntrlr); + return; + } + + pd->num_cs = num_cs; + pd->src_clk_nr = src_clk_nr; + pd->src_clk_name = spi_src_clks[src_clk_nr]; +} diff --git a/arch/arm/mach-s5p6440/gpio.c b/arch/arm/mach-s5p6440/gpio.c index 262dc75d5bea..92efc05b1ba2 100644 --- a/arch/arm/mach-s5p6440/gpio.c +++ b/arch/arm/mach-s5p6440/gpio.c @@ -46,6 +46,7 @@ static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip, void __iomem *base = ourchip->base; void __iomem *regcon = base; unsigned long con; + unsigned long flags; switch (offset) { case 6: @@ -63,10 +64,14 @@ static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip, break; } + s3c_gpio_lock(ourchip, flags); + con = __raw_readl(regcon); con &= ~(0xf << con_4bit_shift(offset)); __raw_writel(con, regcon); + s3c_gpio_unlock(ourchip, flags); + return 0; } @@ -78,6 +83,7 @@ static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip, void __iomem *regcon = base; unsigned long con; unsigned long dat; + unsigned long flags; unsigned con_offset = offset; switch (con_offset) { @@ -96,6 +102,8 @@ static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip, break; } + s3c_gpio_lock(ourchip, flags); + con = __raw_readl(regcon); con &= ~(0xf << con_4bit_shift(con_offset)); con |= 0x1 << con_4bit_shift(con_offset); @@ -109,6 +117,8 @@ static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip, __raw_writel(con, regcon); __raw_writel(dat, base + GPIODAT_OFF); + s3c_gpio_unlock(ourchip, flags); + return 0; } @@ -117,6 +127,7 @@ int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip, { void __iomem *reg = chip->base; unsigned int shift; + unsigned long flags; u32 con; switch (off) { @@ -142,11 +153,15 @@ int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip, cfg <<= shift; } + s3c_gpio_lock(chip, flags); + con = __raw_readl(reg); con &= ~(0xf << shift); con |= cfg; __raw_writel(con, reg); + s3c_gpio_unlock(chip, flags); + return 0; } diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h index 72aedadd412c..44011b91fbd1 100644 --- a/arch/arm/mach-s5p6440/include/mach/map.h +++ b/arch/arm/mach-s5p6440/include/mach/map.h @@ -54,6 +54,9 @@ #define S5P6440_PA_IIC0 (0xEC104000) +#define S5P6440_PA_SPI0 0xEC400000 +#define S5P6440_PA_SPI1 0xEC500000 + #define S5P6440_PA_HSOTG (0xED100000) #define S5P6440_PA_HSMMC0 (0xED800000) @@ -69,8 +72,13 @@ /* PCM */ #define S5P6440_PA_PCM 0xF2100000 +#define S5P6440_PA_ADC (0xF3000000) + /* compatibiltiy defines. */ #define S3C_PA_UART S5P6440_PA_UART #define S3C_PA_IIC S5P6440_PA_IIC0 +#define S3C_PA_WDT S5P6440_PA_WDT + +#define SAMSUNG_PA_ADC S5P6440_PA_ADC #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/spi-clocks.h b/arch/arm/mach-s5p6440/include/mach/spi-clocks.h new file mode 100644 index 000000000000..5fbca50d1cfb --- /dev/null +++ b/arch/arm/mach-s5p6440/include/mach/spi-clocks.h @@ -0,0 +1,17 @@ +/* linux/arch/arm/mach-s5p6440/include/mach/spi-clocks.h + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __S5P6440_PLAT_SPI_CLKS_H +#define __S5P6440_PLAT_SPI_CLKS_H __FILE__ + +#define S5P6440_SPI_SRCCLK_PCLK 0 +#define S5P6440_SPI_SRCCLK_SCLK 1 + +#endif /* __S5P6440_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p6440/mach-smdk6440.c index d7fede971ca6..8291fecc701a 100644 --- a/arch/arm/mach-s5p6440/mach-smdk6440.c +++ b/arch/arm/mach-s5p6440/mach-smdk6440.c @@ -38,6 +38,8 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/pll.h> +#include <plat/adc.h> +#include <plat/ts.h> #define S5P6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -85,6 +87,15 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { static struct platform_device *smdk6440_devices[] __initdata = { &s5p6440_device_iis, + &s3c_device_adc, + &s3c_device_ts, + &s3c_device_wdt, +}; + +static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, }; static void __init smdk6440_map_io(void) @@ -96,6 +107,8 @@ static void __init smdk6440_map_io(void) static void __init smdk6440_machine_init(void) { + s3c24xx_ts_set_platdata(&s3c_ts_platform); + platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices)); } diff --git a/arch/arm/mach-s5p6442/Makefile b/arch/arm/mach-s5p6442/Makefile index e30a7f76aee6..90a3d8373416 100644 --- a/arch/arm/mach-s5p6442/Makefile +++ b/arch/arm/mach-s5p6442/Makefile @@ -21,3 +21,4 @@ obj-$(CONFIG_MACH_SMDK6442) += mach-smdk6442.o # device support obj-y += dev-audio.o +obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o diff --git a/arch/arm/mach-s5p6442/dev-spi.c b/arch/arm/mach-s5p6442/dev-spi.c new file mode 100644 index 000000000000..30199525daca --- /dev/null +++ b/arch/arm/mach-s5p6442/dev-spi.c @@ -0,0 +1,123 @@ +/* linux/arch/arm/mach-s5p6442/dev-spi.c + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <mach/dma.h> +#include <mach/map.h> +#include <mach/irqs.h> +#include <mach/gpio.h> +#include <mach/spi-clocks.h> + +#include <plat/s3c64xx-spi.h> +#include <plat/gpio-cfg.h> + +static char *spi_src_clks[] = { + [S5P6442_SPI_SRCCLK_PCLK] = "pclk", + [S5P6442_SPI_SRCCLK_SCLK] = "spi_epll", +}; + +/* SPI Controller platform_devices */ + +/* Since we emulate multi-cs capability, we do not touch the CS. + * The emulated CS is toggled by board specific mechanism, as it can + * be either some immediate GPIO or some signal out of some other + * chip in between ... or some yet another way. + * We simply do not assume anything about CS. + */ +static int s5p6442_spi_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5P6442_GPB(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6442_GPB(2), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6442_GPB(3), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6442_GPB(0), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6442_GPB(2), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6442_GPB(3), S3C_GPIO_PULL_UP); + break; + + default: + dev_err(&pdev->dev, "Invalid SPI Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct resource s5p6442_spi0_resource[] = { + [0] = { + .start = S5P6442_PA_SPI, + .end = S5P6442_PA_SPI + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI0_TX, + .end = DMACH_SPI0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI0_RX, + .end = DMACH_SPI0_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI0, + .end = IRQ_SPI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64xx_spi_info s5p6442_spi0_pdata = { + .cfg_gpio = s5p6442_spi_cfg_gpio, + .fifo_lvl_mask = 0x1ff, + .rx_lvl_offset = 15, +}; + +static u64 spi_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5p6442_device_spi = { + .name = "s3c64xx-spi", + .id = 0, + .num_resources = ARRAY_SIZE(s5p6442_spi0_resource), + .resource = s5p6442_spi0_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5p6442_spi0_pdata, + }, +}; + +void __init s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) +{ + struct s3c64xx_spi_info *pd; + + /* Reject invalid configuration */ + if (!num_cs || src_clk_nr < 0 + || src_clk_nr > S5P6442_SPI_SRCCLK_SCLK) { + printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); + return; + } + + switch (cntrlr) { + case 0: + pd = &s5p6442_spi0_pdata; + break; + default: + printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", + __func__, cntrlr); + return; + } + + pd->num_cs = num_cs; + pd->src_clk_nr = src_clk_nr; + pd->src_clk_name = spi_src_clks[src_clk_nr]; +} diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h index 7568dc0d6be0..32ca424ef7f9 100644 --- a/arch/arm/mach-s5p6442/include/mach/map.h +++ b/arch/arm/mach-s5p6442/include/mach/map.h @@ -54,6 +54,8 @@ #define S5P6442_PA_SDRAM (0x20000000) #define S5P_PA_SDRAM S5P6442_PA_SDRAM +#define S5P6442_PA_SPI 0xEC300000 + /* I2S */ #define S5P6442_PA_I2S0 0xC0B00000 #define S5P6442_PA_I2S1 0xF2200000 diff --git a/arch/arm/mach-s5p6442/include/mach/spi-clocks.h b/arch/arm/mach-s5p6442/include/mach/spi-clocks.h new file mode 100644 index 000000000000..7fd88205a97c --- /dev/null +++ b/arch/arm/mach-s5p6442/include/mach/spi-clocks.h @@ -0,0 +1,17 @@ +/* linux/arch/arm/mach-s5p6442/include/mach/spi-clocks.h + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __S5P6442_PLAT_SPI_CLKS_H +#define __S5P6442_PLAT_SPI_CLKS_H __FILE__ + +#define S5P6442_SPI_SRCCLK_PCLK 0 +#define S5P6442_SPI_SRCCLK_SCLK 1 + +#endif /* __S5P6442_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index 8593337784e1..b2a11dfa3399 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -5,10 +5,13 @@ # Configuration options for the S5PC100 CPU +if ARCH_S5PC100 + config CPU_S5PC100 bool - select CPU_S5PC100_INIT - select CPU_S5PC100_CLOCK + select PLAT_S5P + select S5P_EXT_INT + select S3C_PL330_DMA help Enable S5PC100 CPU support @@ -17,17 +20,22 @@ config S5PC100_SETUP_FB_24BPP help Common setup code for S5PC1XX with an 24bpp RGB display helper. -config S5PC100_SETUP_SDHCI - bool - select S5PC1XX_SETUP_SDHCI_GPIO - help - Internal helper functions for S5PC100 based SDHCI systems - config S5PC100_SETUP_I2C1 bool help Common setup code for i2c bus 1. +config S5PC100_SETUP_SDHCI + bool + select S5PC100_SETUP_SDHCI_GPIO + help + Internal helper functions for S5PC100 based SDHCI systems + +config S5PC100_SETUP_SDHCI_GPIO + bool + help + Common setup code for SDHCI gpio. + config MACH_SMDKC100 bool "SMDKC100" select CPU_S5PC100 @@ -41,3 +49,5 @@ config MACH_SMDKC100 select S5PC100_SETUP_SDHCI help Machine support for the Samsung SMDKC100 + +endif diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile index 373bc546eae8..543f3de5131e 100644 --- a/arch/arm/mach-s5pc100/Makefile +++ b/arch/arm/mach-s5pc100/Makefile @@ -11,14 +11,24 @@ obj- := # Core support for S5PC100 system -obj-$(CONFIG_CPU_S5PC100) += cpu.o gpiolib.o +obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o gpiolib.o irq-gpio.o obj-$(CONFIG_CPU_S5PC100) += setup-i2c0.o +obj-$(CONFIG_CPU_S5PC100) += dma.o # Helper and device support obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o -obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o +obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o +obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o + +# device support +obj-y += dev-audio.o +obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o # machine support + obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o + +# device support +obj-y += dev-audio.o diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c index d79e7574a852..7b5bdbc9a5df 100644 --- a/arch/arm/mach-s5pc100/cpu.c +++ b/arch/arm/mach-s5pc100/cpu.c @@ -22,47 +22,55 @@ #include <linux/serial_core.h> #include <linux/platform_device.h> -#include <asm/proc-fns.h> - #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> +#include <asm/proc-fns.h> + #include <mach/hardware.h> #include <mach/map.h> #include <asm/irq.h> -#include <plat/cpu-freq.h> #include <plat/regs-serial.h> -#include <plat/regs-power.h> +#include <mach/regs-clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/clock.h> -#include <plat/sdhci.h> #include <plat/iic-core.h> +#include <plat/sdhci.h> +#include <plat/onenand-core.h> + #include <plat/s5pc100.h> /* Initial IO mappings */ static struct map_desc s5pc100_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSTIMER, + .pfn = __phys_to_pfn(S5PC100_PA_SYSTIMER), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC2, + .pfn = __phys_to_pfn(S5P_PA_VIC2), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5PC100_VA_OTHERS, + .pfn = __phys_to_pfn(S5PC100_PA_OTHERS), + .length = SZ_4K, + .type = MT_DEVICE, + } }; static void s5pc100_idle(void) { - unsigned long tmp; - - tmp = __raw_readl(S5PC100_PWR_CFG); - tmp &= ~S5PC100_PWRCFG_CFG_DEEP_IDLE; - tmp &= ~S5PC100_PWRCFG_CFG_WFI_MASK; - tmp |= S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE; - __raw_writel(tmp, S5PC100_PWR_CFG); - - tmp = __raw_readl(S5PC100_OTHERS); - tmp |= S5PC100_PMU_INT_DISABLE; - __raw_writel(tmp, S5PC100_OTHERS); + if (!need_resched()) + cpu_do_idle(); - cpu_do_idle(); + local_irq_enable(); } /* s5pc100_map_io @@ -82,26 +90,29 @@ void __init s5pc100_map_io(void) /* the i2c devices are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); + + s3c_onenand_setname("s5pc100-onenand"); } void __init s5pc100_init_clocks(int xtal) { - printk(KERN_DEBUG "%s: initialising clocks\n", __func__); + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + s3c24xx_register_baseclocks(xtal); - s5pc1xx_register_clocks(); + s5p_register_clocks(xtal); s5pc100_register_clocks(); s5pc100_setup_clocks(); } void __init s5pc100_init_irq(void) { - u32 vic_valid[] = {~0, ~0, ~0}; + u32 vic[] = {~0, ~0, ~0}; /* VIC0, VIC1, and VIC2 are fully populated. */ - s5pc1xx_init_irq(vic_valid, ARRAY_SIZE(vic_valid)); + s5p_init_irq(vic, ARRAY_SIZE(vic)); } -struct sysdev_class s5pc100_sysclass = { +static struct sysdev_class s5pc100_sysclass = { .name = "s5pc100-core", }; @@ -118,9 +129,10 @@ core_initcall(s5pc100_core_init); int __init s5pc100_init(void) { - printk(KERN_DEBUG "S5PC100: Initialising architecture\n"); + printk(KERN_INFO "S5PC100: Initializing architecture\n"); - s5pc1xx_idle = s5pc100_idle; + /* set idle function */ + pm_idle = s5pc100_idle; return sysdev_register(&s5pc100_sysdev); } diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c new file mode 100644 index 000000000000..18cfe9ae1936 --- /dev/null +++ b/arch/arm/mach-s5pc100/dev-audio.c @@ -0,0 +1,287 @@ +/* linux/arch/arm/mach-s5pc100/dev-audio.c + * + * Copyright (c) 2010 Samsung Electronics Co. Ltd + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <plat/gpio-cfg.h> +#include <plat/audio.h> + +#include <mach/gpio.h> +#include <mach/map.h> +#include <mach/dma.h> +#include <mach/irqs.h> + +static int s5pc100_cfg_i2s(struct platform_device *pdev) +{ + /* configure GPIO for i2s port */ + switch (pdev->id) { + case 1: + s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(2)); + break; + + case 2: + s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(4)); + break; + + case -1: /* Dedicated pins */ + break; + + default: + printk(KERN_ERR "Invalid Device %d\n", pdev->id); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s3c_i2s_pdata = { + .cfg_gpio = s5pc100_cfg_i2s, +}; + +static struct resource s5pc100_iis0_resource[] = { + [0] = { + .start = S5PC100_PA_I2S0, + .end = S5PC100_PA_I2S0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S0_TX, + .end = DMACH_I2S0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S0_RX, + .end = DMACH_I2S0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pc100_device_iis0 = { + .name = "s3c64xx-iis-v4", + .id = -1, + .num_resources = ARRAY_SIZE(s5pc100_iis0_resource), + .resource = s5pc100_iis0_resource, + .dev = { + .platform_data = &s3c_i2s_pdata, + }, +}; + +static struct resource s5pc100_iis1_resource[] = { + [0] = { + .start = S5PC100_PA_I2S1, + .end = S5PC100_PA_I2S1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S1_TX, + .end = DMACH_I2S1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S1_RX, + .end = DMACH_I2S1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pc100_device_iis1 = { + .name = "s3c64xx-iis", + .id = 1, + .num_resources = ARRAY_SIZE(s5pc100_iis1_resource), + .resource = s5pc100_iis1_resource, + .dev = { + .platform_data = &s3c_i2s_pdata, + }, +}; + +static struct resource s5pc100_iis2_resource[] = { + [0] = { + .start = S5PC100_PA_I2S2, + .end = S5PC100_PA_I2S2 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S2_TX, + .end = DMACH_I2S2_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S2_RX, + .end = DMACH_I2S2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pc100_device_iis2 = { + .name = "s3c64xx-iis", + .id = 2, + .num_resources = ARRAY_SIZE(s5pc100_iis2_resource), + .resource = s5pc100_iis2_resource, + .dev = { + .platform_data = &s3c_i2s_pdata, + }, +}; + +/* PCM Controller platform_devices */ + +static int s5pc100_pcm_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(5)); + break; + + case 1: + s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(3)); + break; + + default: + printk(KERN_DEBUG "Invalid PCM Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s3c_pcm_pdata = { + .cfg_gpio = s5pc100_pcm_cfg_gpio, +}; + +static struct resource s5pc100_pcm0_resource[] = { + [0] = { + .start = S5PC100_PA_PCM0, + .end = S5PC100_PA_PCM0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM0_TX, + .end = DMACH_PCM0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM0_RX, + .end = DMACH_PCM0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pc100_device_pcm0 = { + .name = "samsung-pcm", + .id = 0, + .num_resources = ARRAY_SIZE(s5pc100_pcm0_resource), + .resource = s5pc100_pcm0_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; + +static struct resource s5pc100_pcm1_resource[] = { + [0] = { + .start = S5PC100_PA_PCM1, + .end = S5PC100_PA_PCM1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM1_TX, + .end = DMACH_PCM1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM1_RX, + .end = DMACH_PCM1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pc100_device_pcm1 = { + .name = "samsung-pcm", + .id = 1, + .num_resources = ARRAY_SIZE(s5pc100_pcm1_resource), + .resource = s5pc100_pcm1_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; + +/* AC97 Controller platform devices */ + +static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev) +{ + s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(4)); + + return 0; +} + +static struct resource s5pc100_ac97_resource[] = { + [0] = { + .start = S5PC100_PA_AC97, + .end = S5PC100_PA_AC97 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_AC97_PCMOUT, + .end = DMACH_AC97_PCMOUT, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_AC97_PCMIN, + .end = DMACH_AC97_PCMIN, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DMACH_AC97_MICIN, + .end = DMACH_AC97_MICIN, + .flags = IORESOURCE_DMA, + }, + [4] = { + .start = IRQ_AC97, + .end = IRQ_AC97, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c_audio_pdata s3c_ac97_pdata = { + .cfg_gpio = s5pc100_ac97_cfg_gpio, +}; + +static u64 s5pc100_ac97_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5pc100_device_ac97 = { + .name = "s3c-ac97", + .id = -1, + .num_resources = ARRAY_SIZE(s5pc100_ac97_resource), + .resource = s5pc100_ac97_resource, + .dev = { + .platform_data = &s3c_ac97_pdata, + .dma_mask = &s5pc100_ac97_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; diff --git a/arch/arm/mach-s5pc100/dev-spi.c b/arch/arm/mach-s5pc100/dev-spi.c new file mode 100644 index 000000000000..14618c346057 --- /dev/null +++ b/arch/arm/mach-s5pc100/dev-spi.c @@ -0,0 +1,233 @@ +/* linux/arch/arm/mach-s5pc100/dev-spi.c + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <mach/dma.h> +#include <mach/map.h> +#include <mach/gpio.h> +#include <mach/spi-clocks.h> + +#include <plat/s3c64xx-spi.h> +#include <plat/gpio-cfg.h> +#include <plat/irqs.h> + +static char *spi_src_clks[] = { + [S5PC100_SPI_SRCCLK_PCLK] = "pclk", + [S5PC100_SPI_SRCCLK_48M] = "spi_48m", + [S5PC100_SPI_SRCCLK_SPIBUS] = "spi_bus", +}; + +/* SPI Controller platform_devices */ + +/* Since we emulate multi-cs capability, we do not touch the CS. + * The emulated CS is toggled by board specific mechanism, as it can + * be either some immediate GPIO or some signal out of some other + * chip in between ... or some yet another way. + * We simply do not assume anything about CS. + */ +static int s5pc100_spi_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5PC100_GPB(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PC100_GPB(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PC100_GPB(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PC100_GPB(0), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5PC100_GPB(1), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5PC100_GPB(2), S3C_GPIO_PULL_UP); + break; + + case 1: + s3c_gpio_cfgpin(S5PC100_GPB(4), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PC100_GPB(5), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PC100_GPB(6), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PC100_GPB(4), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5PC100_GPB(5), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5PC100_GPB(6), S3C_GPIO_PULL_UP); + break; + + case 2: + s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(3)); + s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5PC100_GPG3(2), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5PC100_GPG3(3), S3C_GPIO_PULL_UP); + break; + + default: + dev_err(&pdev->dev, "Invalid SPI Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct resource s5pc100_spi0_resource[] = { + [0] = { + .start = S5PC100_PA_SPI0, + .end = S5PC100_PA_SPI0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI0_TX, + .end = DMACH_SPI0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI0_RX, + .end = DMACH_SPI0_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI0, + .end = IRQ_SPI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64xx_spi_info s5pc100_spi0_pdata = { + .cfg_gpio = s5pc100_spi_cfg_gpio, + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 13, + .high_speed = 1, +}; + +static u64 spi_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5pc100_device_spi0 = { + .name = "s3c64xx-spi", + .id = 0, + .num_resources = ARRAY_SIZE(s5pc100_spi0_resource), + .resource = s5pc100_spi0_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5pc100_spi0_pdata, + }, +}; + +static struct resource s5pc100_spi1_resource[] = { + [0] = { + .start = S5PC100_PA_SPI1, + .end = S5PC100_PA_SPI1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI1_TX, + .end = DMACH_SPI1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI1_RX, + .end = DMACH_SPI1_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI1, + .end = IRQ_SPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64xx_spi_info s5pc100_spi1_pdata = { + .cfg_gpio = s5pc100_spi_cfg_gpio, + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 13, + .high_speed = 1, +}; + +struct platform_device s5pc100_device_spi1 = { + .name = "s3c64xx-spi", + .id = 1, + .num_resources = ARRAY_SIZE(s5pc100_spi1_resource), + .resource = s5pc100_spi1_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5pc100_spi1_pdata, + }, +}; + +static struct resource s5pc100_spi2_resource[] = { + [0] = { + .start = S5PC100_PA_SPI2, + .end = S5PC100_PA_SPI2 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI2_TX, + .end = DMACH_SPI2_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI2_RX, + .end = DMACH_SPI2_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI2, + .end = IRQ_SPI2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64xx_spi_info s5pc100_spi2_pdata = { + .cfg_gpio = s5pc100_spi_cfg_gpio, + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 13, + .high_speed = 1, +}; + +struct platform_device s5pc100_device_spi2 = { + .name = "s3c64xx-spi", + .id = 2, + .num_resources = ARRAY_SIZE(s5pc100_spi2_resource), + .resource = s5pc100_spi2_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5pc100_spi2_pdata, + }, +}; + +void __init s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) +{ + struct s3c64xx_spi_info *pd; + + /* Reject invalid configuration */ + if (!num_cs || src_clk_nr < 0 + || src_clk_nr > S5PC100_SPI_SRCCLK_SPIBUS) { + printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); + return; + } + + switch (cntrlr) { + case 0: + pd = &s5pc100_spi0_pdata; + break; + case 1: + pd = &s5pc100_spi1_pdata; + break; + case 2: + pd = &s5pc100_spi2_pdata; + break; + default: + printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", + __func__, cntrlr); + return; + } + + pd->num_cs = num_cs; + pd->src_clk_nr = src_clk_nr; + pd->src_clk_name = spi_src_clks[src_clk_nr]; +} diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c new file mode 100644 index 000000000000..0f5517571e2c --- /dev/null +++ b/arch/arm/mach-s5pc100/dma.c @@ -0,0 +1,167 @@ +/* + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <plat/devs.h> + +#include <mach/map.h> +#include <mach/irqs.h> + +#include <plat/s3c-pl330-pdata.h> + +static u64 dma_dmamask = DMA_BIT_MASK(32); + +static struct resource s5pc100_pdma0_resource[] = { + [0] = { + .start = S5PC100_PA_PDMA0, + .end = S5PC100_PA_PDMA0 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PDMA0, + .end = IRQ_PDMA0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c_pl330_platdata s5pc100_pdma0_pdata = { + .peri = { + [0] = DMACH_UART0_RX, + [1] = DMACH_UART0_TX, + [2] = DMACH_UART1_RX, + [3] = DMACH_UART1_TX, + [4] = DMACH_UART2_RX, + [5] = DMACH_UART2_TX, + [6] = DMACH_UART3_RX, + [7] = DMACH_UART3_TX, + [8] = DMACH_IRDA, + [9] = DMACH_I2S0_RX, + [10] = DMACH_I2S0_TX, + [11] = DMACH_I2S0S_TX, + [12] = DMACH_I2S1_RX, + [13] = DMACH_I2S1_TX, + [14] = DMACH_I2S2_RX, + [15] = DMACH_I2S2_TX, + [16] = DMACH_SPI0_RX, + [17] = DMACH_SPI0_TX, + [18] = DMACH_SPI1_RX, + [19] = DMACH_SPI1_TX, + [20] = DMACH_SPI2_RX, + [21] = DMACH_SPI2_TX, + [22] = DMACH_AC97_MICIN, + [23] = DMACH_AC97_PCMIN, + [24] = DMACH_AC97_PCMOUT, + [25] = DMACH_EXTERNAL, + [26] = DMACH_PWM, + [27] = DMACH_SPDIF, + [28] = DMACH_HSI_RX, + [29] = DMACH_HSI_TX, + [30] = DMACH_MAX, + [31] = DMACH_MAX, + }, +}; + +static struct platform_device s5pc100_device_pdma0 = { + .name = "s3c-pl330", + .id = 1, + .num_resources = ARRAY_SIZE(s5pc100_pdma0_resource), + .resource = s5pc100_pdma0_resource, + .dev = { + .dma_mask = &dma_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5pc100_pdma0_pdata, + }, +}; + +static struct resource s5pc100_pdma1_resource[] = { + [0] = { + .start = S5PC100_PA_PDMA1, + .end = S5PC100_PA_PDMA1 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PDMA1, + .end = IRQ_PDMA1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c_pl330_platdata s5pc100_pdma1_pdata = { + .peri = { + [0] = DMACH_UART0_RX, + [1] = DMACH_UART0_TX, + [2] = DMACH_UART1_RX, + [3] = DMACH_UART1_TX, + [4] = DMACH_UART2_RX, + [5] = DMACH_UART2_TX, + [6] = DMACH_UART3_RX, + [7] = DMACH_UART3_TX, + [8] = DMACH_IRDA, + [9] = DMACH_I2S0_RX, + [10] = DMACH_I2S0_TX, + [11] = DMACH_I2S0S_TX, + [12] = DMACH_I2S1_RX, + [13] = DMACH_I2S1_TX, + [14] = DMACH_I2S2_RX, + [15] = DMACH_I2S2_TX, + [16] = DMACH_SPI0_RX, + [17] = DMACH_SPI0_TX, + [18] = DMACH_SPI1_RX, + [19] = DMACH_SPI1_TX, + [20] = DMACH_SPI2_RX, + [21] = DMACH_SPI2_TX, + [22] = DMACH_PCM0_RX, + [23] = DMACH_PCM0_TX, + [24] = DMACH_PCM1_RX, + [25] = DMACH_PCM1_TX, + [26] = DMACH_MSM_REQ0, + [27] = DMACH_MSM_REQ1, + [28] = DMACH_MSM_REQ2, + [29] = DMACH_MSM_REQ3, + [30] = DMACH_MAX, + [31] = DMACH_MAX, + }, +}; + +static struct platform_device s5pc100_device_pdma1 = { + .name = "s3c-pl330", + .id = 2, + .num_resources = ARRAY_SIZE(s5pc100_pdma1_resource), + .resource = s5pc100_pdma1_resource, + .dev = { + .dma_mask = &dma_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5pc100_pdma1_pdata, + }, +}; + +static struct platform_device *s5pc100_dmacs[] __initdata = { + &s5pc100_device_pdma0, + &s5pc100_device_pdma1, +}; + +static int __init s5pc100_dma_init(void) +{ + platform_add_devices(s5pc100_dmacs, ARRAY_SIZE(s5pc100_dmacs)); + + return 0; +} +arch_initcall(s5pc100_dma_init); diff --git a/arch/arm/mach-s5pc100/gpiolib.c b/arch/arm/mach-s5pc100/gpiolib.c index c8e8336a3a12..0fab7f2cd8bf 100644 --- a/arch/arm/mach-s5pc100/gpiolib.c +++ b/arch/arm/mach-s5pc100/gpiolib.c @@ -1,10 +1,10 @@ /* - * arch/arm/plat-s5pc1xx/gpiolib.c + * arch/arm/plat-s5pc100/gpiolib.c * * Copyright 2009 Samsung Electronics Co * Kyungmin Park <kyungmin.park@samsung.com> * - * S5PC1XX - GPIOlib support + * S5PC100 - GPIOlib support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -61,13 +61,12 @@ * L3 8 4Bit None */ -#if 0 -static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) +static int s5pc100_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) { return S3C_IRQ_GPIO(chip->base + offset); } -static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset) +static int s5pc100_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset) { int base; @@ -85,7 +84,7 @@ static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset) return IRQ_EINT(24 + offset); return -EINVAL; } -#endif + static struct s3c_gpio_cfg gpio_cfg = { .set_config = s3c_gpio_setcfg_s3c64xx_4bit, .set_pull = s3c_gpio_setpull_updown, @@ -382,31 +381,30 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = { }; /* FIXME move from irq-gpio.c */ -extern struct irq_chip s5pc1xx_gpioint; -extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc); +extern struct irq_chip s5pc100_gpioint; +extern void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc); static __init void s5pc100_gpiolib_link(struct s3c_gpio_chip *chip) { -#if 0 /* Interrupt */ if (chip->config == &gpio_cfg) { int i, irq; - chip->chip.to_irq = s5pc1xx_gpiolib_to_irq; + chip->chip.to_irq = s5pc100_gpiolib_to_irq; for (i = 0; i < chip->chip.ngpio; i++) { irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i; - set_irq_chip(irq, &s5pc1xx_gpioint); + set_irq_chip(irq, &s5pc100_gpioint); set_irq_data(irq, &chip->chip); set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } - } else if (chip->config == &gpio_cfg_eint) - chip->chip.to_irq = s5pc1xx_gpiolib_to_eint; -#endif + } else if (chip->config == &gpio_cfg_eint) { + chip->chip.to_irq = s5pc100_gpiolib_to_eint; + } } -static __init int s5pc1xx_gpiolib_init(void) +static __init int s5pc100_gpiolib_init(void) { struct s3c_gpio_chip *chip; int nr_chips; @@ -419,10 +417,10 @@ static __init int s5pc1xx_gpiolib_init(void) samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, ARRAY_SIZE(s5pc100_gpio_chips)); -#if 0 + /* Interrupt */ - set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler); -#endif + set_irq_chained_handler(IRQ_GPIOINT, s5pc100_irq_gpioint_handler); + return 0; } -core_initcall(s5pc1xx_gpiolib_init); +core_initcall(s5pc100_gpiolib_init); diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S index e181f5789482..70e02e91ee3c 100644 --- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S @@ -22,12 +22,14 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rx, tmp + .macro addruart, rx, rtmp mrc p15, 0, \rx, c1, c0 tst \rx, #1 ldreq \rx, = S3C_PA_UART - ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) + ldrne \rx, = S3C_VA_UART +#if CONFIG_DEBUG_S3C_UART != 0 add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) +#endif .endm /* include the reset of the code which will do the work, we're only diff --git a/arch/arm/mach-s5pc100/include/mach/dma.h b/arch/arm/mach-s5pc100/include/mach/dma.h new file mode 100644 index 000000000000..81209eb1409b --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/dma.h @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __MACH_DMA_H +#define __MACH_DMA_H + +/* This platform uses the common S3C DMA API driver for PL330 */ +#include <plat/s3c-dma-pl330.h> + +#endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S index 67131939e626..ba76af052c81 100644 --- a/arch/arm/mach-s5pc100/include/mach/entry-macro.S +++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S @@ -20,7 +20,7 @@ .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =S3C_VA_VIC0 + ldr \base, =VA_VIC0 .endm .macro arch_ret_to_user, tmp1, tmp2 @@ -29,18 +29,18 @@ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp @ check the vic0 - mov \irqnr, # S3C_IRQ_OFFSET + 31 + mov \irqnr, # S5P_IRQ_OFFSET + 31 ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] teq \irqstat, #0 @ otherwise try vic1 - addeq \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0) + addeq \tmp, \base, #(VA_VIC1 - VA_VIC0) addeq \irqnr, \irqnr, #32 ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] teqeq \irqstat, #0 @ otherwise try vic2 - addeq \tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0) + addeq \tmp, \base, #(VA_VIC2 - VA_VIC0) addeq \irqnr, \irqnr, #32 ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] teqeq \irqstat, #0 diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h index 29a8a12d9b4f..71ae1f52df1d 100644 --- a/arch/arm/mach-s5pc100/include/mach/gpio.h +++ b/arch/arm/mach-s5pc100/include/mach/gpio.h @@ -146,6 +146,13 @@ enum s5p_gpio_number { /* define the number of gpios we need to the one after the MP04() range */ #define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1) +#define EINT_MODE S3C_GPIO_SFN(0x2) + +#define EINT_GPIO_0(x) S5PC100_GPH0(x) +#define EINT_GPIO_1(x) S5PC100_GPH1(x) +#define EINT_GPIO_2(x) S5PC100_GPH2(x) +#define EINT_GPIO_3(x) S5PC100_GPH3(x) + #include <asm-generic/gpio.h> #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h index b53fa48a52c6..15066df3ced9 100644 --- a/arch/arm/mach-s5pc100/include/mach/irqs.h +++ b/arch/arm/mach-s5pc100/include/mach/irqs.h @@ -11,9 +11,107 @@ #include <plat/irqs.h> -/* LCD */ +/* VIC0: system, DMA, timer */ +#define IRQ_EINT16_31 S5P_IRQ_VIC0(16) +#define IRQ_BATF S5P_IRQ_VIC0(17) +#define IRQ_MDMA S5P_IRQ_VIC0(18) +#define IRQ_PDMA0 S5P_IRQ_VIC0(19) +#define IRQ_PDMA1 S5P_IRQ_VIC0(20) +#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21) +#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22) +#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23) +#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24) +#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25) +#define IRQ_SYSTIMER S5P_IRQ_VIC0(26) +#define IRQ_WDT S5P_IRQ_VIC0(27) +#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28) +#define IRQ_RTC_TIC S5P_IRQ_VIC0(29) +#define IRQ_GPIOINT S5P_IRQ_VIC0(30) + +/* VIC1: ARM, power, memory, connectivity */ +#define IRQ_CORTEX0 S5P_IRQ_VIC1(0) +#define IRQ_CORTEX1 S5P_IRQ_VIC1(1) +#define IRQ_CORTEX2 S5P_IRQ_VIC1(2) +#define IRQ_CORTEX3 S5P_IRQ_VIC1(3) +#define IRQ_CORTEX4 S5P_IRQ_VIC1(4) +#define IRQ_IEMAPC S5P_IRQ_VIC1(5) +#define IRQ_IEMIEC S5P_IRQ_VIC1(6) +#define IRQ_ONENAND S5P_IRQ_VIC1(7) +#define IRQ_NFC S5P_IRQ_VIC1(8) +#define IRQ_CFC S5P_IRQ_VIC1(9) +#define IRQ_UART0 S5P_IRQ_VIC1(10) +#define IRQ_UART1 S5P_IRQ_VIC1(11) +#define IRQ_UART2 S5P_IRQ_VIC1(12) +#define IRQ_UART3 S5P_IRQ_VIC1(13) +#define IRQ_IIC S5P_IRQ_VIC1(14) +#define IRQ_SPI0 S5P_IRQ_VIC1(15) +#define IRQ_SPI1 S5P_IRQ_VIC1(16) +#define IRQ_SPI2 S5P_IRQ_VIC1(17) +#define IRQ_IRDA S5P_IRQ_VIC1(18) +#define IRQ_CAN0 S5P_IRQ_VIC1(19) +#define IRQ_CAN1 S5P_IRQ_VIC1(20) +#define IRQ_HSIRX S5P_IRQ_VIC1(21) +#define IRQ_HSITX S5P_IRQ_VIC1(22) +#define IRQ_UHOST S5P_IRQ_VIC1(23) +#define IRQ_OTG S5P_IRQ_VIC1(24) +#define IRQ_MSM S5P_IRQ_VIC1(25) +#define IRQ_HSMMC0 S5P_IRQ_VIC1(26) +#define IRQ_HSMMC1 S5P_IRQ_VIC1(27) +#define IRQ_HSMMC2 S5P_IRQ_VIC1(28) +#define IRQ_MIPICSI S5P_IRQ_VIC1(29) +#define IRQ_MIPIDSI S5P_IRQ_VIC1(30) + +/* VIC2: multimedia, audio, security */ +#define IRQ_LCD0 S5P_IRQ_VIC2(0) +#define IRQ_LCD1 S5P_IRQ_VIC2(1) +#define IRQ_LCD2 S5P_IRQ_VIC2(2) +#define IRQ_LCD3 S5P_IRQ_VIC2(3) +#define IRQ_ROTATOR S5P_IRQ_VIC2(4) +#define IRQ_FIMC0 S5P_IRQ_VIC2(5) +#define IRQ_FIMC1 S5P_IRQ_VIC2(6) +#define IRQ_FIMC2 S5P_IRQ_VIC2(7) +#define IRQ_JPEG S5P_IRQ_VIC2(8) +#define IRQ_2D S5P_IRQ_VIC2(9) +#define IRQ_3D S5P_IRQ_VIC2(10) +#define IRQ_MIXER S5P_IRQ_VIC2(11) +#define IRQ_HDMI S5P_IRQ_VIC2(12) +#define IRQ_IIC1 S5P_IRQ_VIC2(13) +#define IRQ_MFC S5P_IRQ_VIC2(14) +#define IRQ_TVENC S5P_IRQ_VIC2(15) +#define IRQ_I2S0 S5P_IRQ_VIC2(16) +#define IRQ_I2S1 S5P_IRQ_VIC2(17) +#define IRQ_I2S2 S5P_IRQ_VIC2(18) +#define IRQ_AC97 S5P_IRQ_VIC2(19) +#define IRQ_PCM0 S5P_IRQ_VIC2(20) +#define IRQ_PCM1 S5P_IRQ_VIC2(21) +#define IRQ_SPDIF S5P_IRQ_VIC2(22) +#define IRQ_ADC S5P_IRQ_VIC2(23) +#define IRQ_PENDN S5P_IRQ_VIC2(24) +#define IRQ_TC IRQ_PENDN +#define IRQ_KEYPAD S5P_IRQ_VIC2(25) +#define IRQ_CG S5P_IRQ_VIC2(26) +#define IRQ_SEC S5P_IRQ_VIC2(27) +#define IRQ_SECRX S5P_IRQ_VIC2(28) +#define IRQ_SECTX S5P_IRQ_VIC2(29) +#define IRQ_SDMIRQ S5P_IRQ_VIC2(30) +#define IRQ_SDMFIQ S5P_IRQ_VIC2(31) +#define IRQ_VIC_END S5P_IRQ_VIC2(31) + +#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) +#define S5P_EINT_BASE2 (IRQ_VIC_END + 1) + +#define IRQ_EINT(x) ((x) < 16 ? S5P_IRQ_VIC0(x) : \ + (S5P_EINT_BASE2 + (x) - 16)) + +#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1) +#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x)) + +/* Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs */ +#define NR_IRQS (S3C_IRQ_GPIO(320) + 1) + +/* Compatibility */ #define IRQ_LCD_FIFO IRQ_LCD0 #define IRQ_LCD_VSYNC IRQ_LCD1 #define IRQ_LCD_SYSTEM IRQ_LCD2 -#endif /* __ASM_ARCH_IRQ_H */ +#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h index 4681ebe8bef6..cadae4305688 100644 --- a/arch/arm/mach-s5pc100/include/mach/map.h +++ b/arch/arm/mach-s5pc100/include/mach/map.h @@ -3,9 +3,7 @@ * Copyright 2009 Samsung Electronics Co. * Byungho Min <bhmin@samsung.com> * - * Based on mach-s3c6400/include/mach/map.h - * - * S5PC1XX - Memory map definitions + * S5PC100 - Memory map definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,6 +14,7 @@ #define __ASM_ARCH_MAP_H __FILE__ #include <plat/map-base.h> +#include <plat/map-s5p.h> /* * map-base.h has already defined virtual memory address @@ -31,25 +30,21 @@ * */ +#define S5PC100_PA_ONENAND_BUF (0xB0000000) +#define S5PC100_SZ_ONENAND_BUF (SZ_256M - SZ_32M) + /* Chip ID */ + #define S5PC100_PA_CHIPID (0xE0000000) -#define S5PC1XX_PA_CHIPID S5PC100_PA_CHIPID -#define S5PC1XX_VA_CHIPID S3C_VA_SYS - -/* System */ -#define S5PC100_PA_CLK (0xE0100000) -#define S5PC100_PA_CLK_OTHER (0xE0200000) -#define S5PC100_PA_PWR (0xE0108000) -#define S5PC1XX_PA_CLK S5PC100_PA_CLK -#define S5PC1XX_PA_PWR S5PC100_PA_PWR -#define S5PC1XX_PA_CLK_OTHER S5PC100_PA_CLK_OTHER -#define S5PC1XX_VA_CLK (S3C_VA_SYS + 0x10000) -#define S5PC1XX_VA_PWR (S3C_VA_SYS + 0x20000) -#define S5PC1XX_VA_CLK_OTHER (S3C_VA_SYS + 0x30000) - -/* GPIO */ -#define S5PC100_PA_GPIO (0xE0300000) -#define S5PC1XX_PA_GPIO S5PC100_PA_GPIO +#define S5P_PA_CHIPID S5PC100_PA_CHIPID + +#define S5PC100_PA_SYSCON (0xE0100000) +#define S5P_PA_SYSCON S5PC100_PA_SYSCON + +#define S5PC100_PA_OTHERS (0xE0200000) +#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000) + +#define S5P_PA_GPIO (0xE0300000) #define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) /* Interrupt */ @@ -59,6 +54,12 @@ #define S5PC100_VA_VIC_OFFSET 0x10000 #define S5PC1XX_PA_VIC(x) (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET)) #define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET)) +#define S5P_PA_VIC0 S5PC1XX_PA_VIC(0) +#define S5P_PA_VIC1 S5PC1XX_PA_VIC(1) +#define S5P_PA_VIC2 S5PC1XX_PA_VIC(2) + + +#define S5PC100_PA_ONENAND (0xE7100000) /* DMA */ #define S5PC100_PA_MDMA (0xE8100000) @@ -67,84 +68,71 @@ /* Timer */ #define S5PC100_PA_TIMER (0xEA000000) -#define S5PC1XX_PA_TIMER S5PC100_PA_TIMER -#define S5PC1XX_VA_TIMER S3C_VA_TIMER +#define S5P_PA_TIMER S5PC100_PA_TIMER -/* RTC */ -#define S5PC100_PA_RTC (0xEA300000) +#define S5PC100_PA_SYSTIMER (0xEA100000) -/* UART */ #define S5PC100_PA_UART (0xEC000000) -#define S5PC1XX_PA_UART S5PC100_PA_UART -#define S5PC1XX_VA_UART S3C_VA_UART -/* I2C */ -#define S5PC100_PA_I2C (0xEC100000) -#define S5PC100_PA_I2C1 (0xEC200000) +#define S5P_PA_UART0 (S5PC100_PA_UART + 0x0) +#define S5P_PA_UART1 (S5PC100_PA_UART + 0x400) +#define S5P_PA_UART2 (S5PC100_PA_UART + 0x800) +#define S5P_PA_UART3 (S5PC100_PA_UART + 0xC00) +#define S5P_SZ_UART SZ_256 + +#define S5PC100_PA_IIC0 (0xEC100000) +#define S5PC100_PA_IIC1 (0xEC200000) + +/* SPI */ +#define S5PC100_PA_SPI0 0xEC300000 +#define S5PC100_PA_SPI1 0xEC400000 +#define S5PC100_PA_SPI2 0xEC500000 /* USB HS OTG */ #define S5PC100_PA_USB_HSOTG (0xED200000) #define S5PC100_PA_USB_HSPHY (0xED300000) -/* SD/MMC */ -#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) -#define S5PC100_PA_HSMMC0 S5PC100_PA_HSMMC(0) -#define S5PC100_PA_HSMMC1 S5PC100_PA_HSMMC(1) -#define S5PC100_PA_HSMMC2 S5PC100_PA_HSMMC(2) - -/* LCD */ #define S5PC100_PA_FB (0xEE000000) -/* Multimedia */ -#define S5PC100_PA_G2D (0xEE800000) -#define S5PC100_PA_JPEG (0xEE500000) -#define S5PC100_PA_ROTATOR (0xEE100000) -#define S5PC100_PA_G3D (0xEF000000) - -/* I2S */ #define S5PC100_PA_I2S0 (0xF2000000) #define S5PC100_PA_I2S1 (0xF2100000) #define S5PC100_PA_I2S2 (0xF2200000) +#define S5PC100_PA_AC97 0xF2300000 + +/* PCM */ +#define S5PC100_PA_PCM0 0xF2400000 +#define S5PC100_PA_PCM1 0xF2500000 + /* KEYPAD */ #define S5PC100_PA_KEYPAD (0xF3100000) -/* ADC & TouchScreen */ -#define S5PC100_PA_TSADC (0xF3000000) +#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) -/* ETC */ #define S5PC100_PA_SDRAM (0x20000000) -#define S5PC1XX_PA_SDRAM S5PC100_PA_SDRAM +#define S5P_PA_SDRAM S5PC100_PA_SDRAM -/* compatibility defines. */ -#define S3C_PA_RTC S5PC100_PA_RTC +/* compatibiltiy defines. */ #define S3C_PA_UART S5PC100_PA_UART -#define S3C_PA_UART0 (S5PC100_PA_UART + 0x0) -#define S3C_PA_UART1 (S5PC100_PA_UART + 0x400) -#define S3C_PA_UART2 (S5PC100_PA_UART + 0x800) -#define S3C_PA_UART3 (S5PC100_PA_UART + 0xC00) -#define S3C_VA_UART0 (S3C_VA_UART + 0x0) -#define S3C_VA_UART1 (S3C_VA_UART + 0x400) -#define S3C_VA_UART2 (S3C_VA_UART + 0x800) -#define S3C_VA_UART3 (S3C_VA_UART + 0xC00) -#define S3C_UART_OFFSET 0x400 -#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) +#define S3C_PA_IIC S5PC100_PA_IIC0 +#define S3C_PA_IIC1 S5PC100_PA_IIC1 #define S3C_PA_FB S5PC100_PA_FB #define S3C_PA_G2D S5PC100_PA_G2D #define S3C_PA_G3D S5PC100_PA_G3D #define S3C_PA_JPEG S5PC100_PA_JPEG #define S3C_PA_ROTATOR S5PC100_PA_ROTATOR -#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x0) -#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000) -#define S3C_VA_VIC2 (S3C_VA_IRQ + 0x20000) -#define S3C_PA_IIC S5PC100_PA_I2C -#define S3C_PA_IIC1 S5PC100_PA_I2C1 +#define S5P_VA_VIC0 S5PC1XX_VA_VIC(0) +#define S5P_VA_VIC1 S5PC1XX_VA_VIC(1) +#define S5P_VA_VIC2 S5PC1XX_VA_VIC(2) #define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG #define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY -#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC0 -#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC1 -#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC2 +#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0) +#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1) +#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2) #define S3C_PA_KEYPAD S5PC100_PA_KEYPAD #define S3C_PA_TSADC S5PC100_PA_TSADC +#define S3C_PA_ONENAND S5PC100_PA_ONENAND +#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF +#define S3C_SZ_ONENAND_BUF S5PC100_SZ_ONENAND_BUF #endif /* __ASM_ARCH_C100_MAP_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/regs-clock.h b/arch/arm/mach-s5pc100/include/mach/regs-clock.h index f2283bdc941e..5d27d286d504 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-clock.h @@ -17,6 +17,8 @@ #define S5P_CLKREG(x) (S3C_VA_SYS + (x)) +#define S5PC100_REG_OTHERS(x) (S5PC100_VA_OTHERS + (x)) + #define S5P_APLL_LOCK S5P_CLKREG(0x00) #define S5P_MPLL_LOCK S5P_CLKREG(0x04) #define S5P_EPLL_LOCK S5P_CLKREG(0x08) @@ -68,4 +70,8 @@ #define S5P_CLKDIV1_PCLKD1_MASK (0x7<<16) #define S5P_CLKDIV1_PCLKD1_SHIFT (16) +#define S5PC100_SWRESET S5PC100_REG_OTHERS(0x000) + +#define S5PC100_SWRESET_RESETVAL 0xc100 + #endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h index 68666913354c..763edebdd577 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h +/* linux/arch/arm/plat-s5pc100/include/plat/regs-gpio.h * * Copyright 2009 Samsung Electronics Co. * Byungho Min <bhmin@samsung.com> @@ -12,7 +12,7 @@ #include <mach/map.h> /* S5PC100 */ -#define S5PC100_GPIO_BASE S5PC1XX_VA_GPIO +#define S5PC100_GPIO_BASE S5P_VA_GPIO #define S5PC100_GPA0_BASE (S5PC100_GPIO_BASE + 0x0000) #define S5PC100_GPA1_BASE (S5PC100_GPIO_BASE + 0x0020) #define S5PC100_GPB_BASE (S5PC100_GPIO_BASE + 0x0040) @@ -47,24 +47,32 @@ #define S5PC100_GPL2_BASE (S5PC100_GPIO_BASE + 0x0360) #define S5PC100_GPL3_BASE (S5PC100_GPIO_BASE + 0x0380) #define S5PC100_GPL4_BASE (S5PC100_GPIO_BASE + 0x03A0) -#define S5PC100_EINT_BASE (S5PC100_GPIO_BASE + 0x0E00) -#define S5PC100_UHOST (S5PC100_GPIO_BASE + 0x0B68) -#define S5PC100_PDNEN (S5PC100_GPIO_BASE + 0x0F80) +#define S5PC100EINT30CON (S5P_VA_GPIO + 0xE00) +#define S5P_EINT_CON(x) (S5PC100EINT30CON + ((x) * 0x4)) -/* PDNEN */ -#define S5PC100_PDNEN_CFG_PDNEN (1 << 1) -#define S5PC100_PDNEN_CFG_AUTO (0 << 1) -#define S5PC100_PDNEN_POWERDOWN (1 << 0) -#define S5PC100_PDNEN_NORMAL (0 << 0) +#define S5PC100EINT30FLTCON0 (S5P_VA_GPIO + 0xE80) +#define S5P_EINT_FLTCON(x) (S5PC100EINT30FLTCON0 + ((x) * 0x4)) -/* Common part */ -/* External interrupt base is same at both s5pc100 and s5pc110 */ -#define S5PC1XX_EINT_BASE (S5PC100_EINT_BASE) +#define S5PC100EINT30MASK (S5P_VA_GPIO + 0xF00) +#define S5P_EINT_MASK(x) (S5PC100EINT30MASK + ((x) * 0x4)) -#define S5PC100_GPx_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S5PC100_GPx_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) -#define S5PC100_GPx_CONMASK(__gpio) (0xf << ((__gpio) * 4)) +#define S5PC100EINT30PEND (S5P_VA_GPIO + 0xF40) +#define S5P_EINT_PEND(x) (S5PC100EINT30PEND + ((x) * 0x4)) + +#define eint_offset(irq) ((irq) < IRQ_EINT16_31 ? ((irq) - IRQ_EINT(0)) : \ + (((irq) - S5P_EINT_BASE2))) + +#define EINT_REG_NR(x) (eint_offset(x) >> 3) + +#define eint_irq_to_bit(irq) (1 << (eint_offset(irq) & 0x7)) + +/* values for S5P_EXTINT0 */ +#define S5P_EXTINT_LOWLEV (0x00) +#define S5P_EXTINT_HILEV (0x01) +#define S5P_EXTINT_FALLEDGE (0x02) +#define S5P_EXTINT_RISEEDGE (0x03) +#define S5P_EXTINT_BOTHEDGE (0x04) #endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h index 751ac15438c8..4d9036d0f288 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-irq.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h @@ -3,7 +3,7 @@ * Copyright 2009 Samsung Electronics Co. * Byungho Min <bhmin@samsung.com> * - * S5PC1XX - IRQ register definitions + * S5PC100 - IRQ register definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,9 +16,4 @@ #include <mach/map.h> #include <asm/hardware/vic.h> -/* interrupt controller */ -#define S5PC1XX_VIC0REG(x) ((x) + S5PC1XX_VA_VIC(0)) -#define S5PC1XX_VIC1REG(x) ((x) + S5PC1XX_VA_VIC(1)) -#define S5PC1XX_VIC2REG(x) ((x) + S5PC1XX_VA_VIC(2)) - #endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/spi-clocks.h b/arch/arm/mach-s5pc100/include/mach/spi-clocks.h new file mode 100644 index 000000000000..65e426370bb2 --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/spi-clocks.h @@ -0,0 +1,18 @@ +/* linux/arch/arm/mach-s5pc100/include/mach/spi-clocks.h + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __S5PC100_PLAT_SPI_CLKS_H +#define __S5PC100_PLAT_SPI_CLKS_H __FILE__ + +#define S5PC100_SPI_SRCCLK_PCLK 0 +#define S5PC100_SPI_SRCCLK_48M 1 +#define S5PC100_SPI_SRCCLK_SPIBUS 2 + +#endif /* __S5PC100_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h index f0d31a2a598c..681f626a9ae1 100644 --- a/arch/arm/mach-s5pc100/include/mach/system.h +++ b/arch/arm/mach-s5pc100/include/mach/system.h @@ -3,7 +3,7 @@ * Copyright 2009 Samsung Electronics Co. * Byungho Min <bhmin@samsung.com> * - * S5PC1XX - system implementation + * S5PC100 - system implementation * * Based on mach-s3c6400/include/mach/system.h */ @@ -13,14 +13,11 @@ #include <linux/io.h> #include <mach/map.h> -#include <plat/regs-clock.h> - -void (*s5pc1xx_idle)(void); +#include <mach/regs-clock.h> static void arch_idle(void) { - if (s5pc1xx_idle) - s5pc1xx_idle(); + /* nothing here yet */ } static void arch_reset(char mode, const char *cmd) diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h index f338c9eec717..20f68730ed18 100644 --- a/arch/arm/mach-s5pc100/include/mach/tick.h +++ b/arch/arm/mach-s5pc100/include/mach/tick.h @@ -20,8 +20,8 @@ */ static inline u32 s3c24xx_ostimer_pending(void) { - u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS); - return pend & 1 << (IRQ_TIMER4_VIC - S5PC1XX_IRQ_VIC0(0)); + u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); + return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0))); } #define TICK_MAX (0xffffffff) diff --git a/arch/arm/plat-s5pc1xx/s5pc100-init.c b/arch/arm/mach-s5pc100/init.c index c58710884ceb..19d7b523c137 100644 --- a/arch/arm/plat-s5pc1xx/s5pc100-init.c +++ b/arch/arm/mach-s5pc100/init.c @@ -1,9 +1,8 @@ -/* linux/arch/arm/plat-s5pc1xx/s5pc100-init.c +/* linux/arch/arm/plat-s5pc100/s5pc100-init.c * * Copyright 2009 Samsung Electronics Co. * Byungho Min <bhmin@samsung.com> * - * S5PC100 - CPU initialisation (common with other S5PC1XX chips) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,9 +18,7 @@ #include <plat/s5pc100.h> /* uart registration process */ - void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) { - /* The driver name is s3c6400-uart to reuse s3c6400_serial_drv */ - s3c24xx_init_uartdevs("s3c6400-uart", s5pc1xx_uart_resources, cfg, no); + s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); } diff --git a/arch/arm/plat-s5pc1xx/irq-gpio.c b/arch/arm/mach-s5pc100/irq-gpio.c index fecca7a679b0..2bf86c18bc73 100644 --- a/arch/arm/plat-s5pc1xx/irq-gpio.c +++ b/arch/arm/mach-s5pc100/irq-gpio.c @@ -1,9 +1,9 @@ /* - * arch/arm/plat-s5pc1xx/irq-gpio.c + * arch/arm/mach-s5pc100/irq-gpio.c * * Copyright (C) 2009 Samsung Electronics * - * S5PC1XX - Interrupt handling for IRQ_GPIO${group}(x) + * S5PC100 - Interrupt handling for IRQ_GPIO${group}(x) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,7 +19,7 @@ #include <mach/map.h> #include <plat/gpio-cfg.h> -#define S5PC1XX_GPIOREG(x) (S5PC1XX_VA_GPIO + (x)) +#define S5P_GPIOREG(x) (S5P_VA_GPIO + (x)) #define CON_OFFSET 0x700 #define MASK_OFFSET 0x900 @@ -49,7 +49,7 @@ static int group_to_pend_offset(int group) return group << 2; } -static int s5pc1xx_get_start(unsigned int group) +static int s5pc100_get_start(unsigned int group) { switch (group) { case 0: return S5PC100_GPIO_A0_START; @@ -80,7 +80,7 @@ static int s5pc1xx_get_start(unsigned int group) return -EINVAL; } -static int s5pc1xx_get_group(unsigned int irq) +static int s5pc100_get_group(unsigned int irq) { irq -= S3C_IRQ_GPIO(0); @@ -134,67 +134,67 @@ static int s5pc1xx_get_group(unsigned int irq) return -EINVAL; } -static int s5pc1xx_get_offset(unsigned int irq) +static int s5pc100_get_offset(unsigned int irq) { struct gpio_chip *chip = get_irq_data(irq); return irq - S3C_IRQ_GPIO(chip->base); } -static void s5pc1xx_gpioint_ack(unsigned int irq) +static void s5pc100_gpioint_ack(unsigned int irq) { int group, offset, pend_offset; unsigned int value; - group = s5pc1xx_get_group(irq); - offset = s5pc1xx_get_offset(irq); + group = s5pc100_get_group(irq); + offset = s5pc100_get_offset(irq); pend_offset = group_to_pend_offset(group); - value = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset); + value = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset); value |= 1 << offset; - __raw_writel(value, S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset); + __raw_writel(value, S5P_GPIOREG(PEND_OFFSET) + pend_offset); } -static void s5pc1xx_gpioint_mask(unsigned int irq) +static void s5pc100_gpioint_mask(unsigned int irq) { int group, offset, mask_offset; unsigned int value; - group = s5pc1xx_get_group(irq); - offset = s5pc1xx_get_offset(irq); + group = s5pc100_get_group(irq); + offset = s5pc100_get_offset(irq); mask_offset = group_to_mask_offset(group); - value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset); + value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset); value |= 1 << offset; - __raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset); + __raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset); } -static void s5pc1xx_gpioint_unmask(unsigned int irq) +static void s5pc100_gpioint_unmask(unsigned int irq) { int group, offset, mask_offset; unsigned int value; - group = s5pc1xx_get_group(irq); - offset = s5pc1xx_get_offset(irq); + group = s5pc100_get_group(irq); + offset = s5pc100_get_offset(irq); mask_offset = group_to_mask_offset(group); - value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset); + value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset); value &= ~(1 << offset); - __raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset); + __raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset); } -static void s5pc1xx_gpioint_mask_ack(unsigned int irq) +static void s5pc100_gpioint_mask_ack(unsigned int irq) { - s5pc1xx_gpioint_mask(irq); - s5pc1xx_gpioint_ack(irq); + s5pc100_gpioint_mask(irq); + s5pc100_gpioint_ack(irq); } -static int s5pc1xx_gpioint_set_type(unsigned int irq, unsigned int type) +static int s5pc100_gpioint_set_type(unsigned int irq, unsigned int type) { int group, offset, con_offset; unsigned int value; - group = s5pc1xx_get_group(irq); - offset = s5pc1xx_get_offset(irq); + group = s5pc100_get_group(irq); + offset = s5pc100_get_offset(irq); con_offset = group_to_con_offset(group); switch (type) { @@ -221,24 +221,24 @@ static int s5pc1xx_gpioint_set_type(unsigned int irq, unsigned int type) } - value = __raw_readl(S5PC1XX_GPIOREG(CON_OFFSET) + con_offset); + value = __raw_readl(S5P_GPIOREG(CON_OFFSET) + con_offset); value &= ~(0xf << (offset * 0x4)); value |= (type << (offset * 0x4)); - __raw_writel(value, S5PC1XX_GPIOREG(CON_OFFSET) + con_offset); + __raw_writel(value, S5P_GPIOREG(CON_OFFSET) + con_offset); return 0; } -struct irq_chip s5pc1xx_gpioint = { +struct irq_chip s5pc100_gpioint = { .name = "GPIO", - .ack = s5pc1xx_gpioint_ack, - .mask = s5pc1xx_gpioint_mask, - .mask_ack = s5pc1xx_gpioint_mask_ack, - .unmask = s5pc1xx_gpioint_unmask, - .set_type = s5pc1xx_gpioint_set_type, + .ack = s5pc100_gpioint_ack, + .mask = s5pc100_gpioint_mask, + .mask_ack = s5pc100_gpioint_mask_ack, + .unmask = s5pc100_gpioint_unmask, + .set_type = s5pc100_gpioint_set_type, }; -void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc) +void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc) { int group, offset, pend_offset, mask_offset; int real_irq, group_end; @@ -248,17 +248,17 @@ void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc) for (group = 0; group < group_end; group++) { pend_offset = group_to_pend_offset(group); - pend = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset); + pend = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset); if (!pend) continue; mask_offset = group_to_mask_offset(group); - mask = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset); + mask = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset); pend &= ~mask; for (offset = 0; offset < 8; offset++) { if (pend & (1 << offset)) { - real_irq = s5pc1xx_get_start(group) + offset; + real_irq = s5pc100_get_start(group) + offset; generic_handle_irq(S3C_IRQ_GPIO(real_irq)); } } diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index bfe67db34f04..af22f8202a07 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -43,38 +43,48 @@ #include <plat/fb.h> #include <plat/iic.h> -#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) -#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) -#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define S5PC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define S5PC100_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define S5PC100_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S3C2440_UFCON_RXTRIG8 | \ + S3C2440_UFCON_TXTRIG16) static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = { [0] = { .hwport = 0, .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, + .ucon = S5PC100_UCON_DEFAULT, + .ulcon = S5PC100_ULCON_DEFAULT, + .ufcon = S5PC100_UFCON_DEFAULT, }, [1] = { .hwport = 1, .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, + .ucon = S5PC100_UCON_DEFAULT, + .ulcon = S5PC100_ULCON_DEFAULT, + .ufcon = S5PC100_UFCON_DEFAULT, }, [2] = { .hwport = 2, .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, + .ucon = S5PC100_UCON_DEFAULT, + .ulcon = S5PC100_ULCON_DEFAULT, + .ufcon = S5PC100_UFCON_DEFAULT, }, [3] = { .hwport = 3, .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, + .ucon = S5PC100_UCON_DEFAULT, + .ulcon = S5PC100_ULCON_DEFAULT, + .ufcon = S5PC100_UFCON_DEFAULT, }, }; @@ -118,8 +128,7 @@ static struct platform_device smdkc100_lcd_powerdev = { static struct s3c_fb_pd_win smdkc100_fb_win0 = { /* this is to ensure we use win0 */ .win_mode = { - .refresh = 70, - .pixclock = (8+13+3+800)*(7+5+1+480), + .pixclock = 1000000000000ULL / ((8+13+3+800)*(7+5+1+480)*80), .left_margin = 8, .right_margin = 13, .upper_margin = 7, @@ -140,8 +149,6 @@ static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = { .setup_gpio = s5pc100_fb_gpio_setup_24bpp, }; -static struct map_desc smdkc100_iodesc[] = {}; - static struct platform_device *smdkc100_devices[] __initdata = { &s3c_device_i2c0, &s3c_device_i2c1, @@ -150,11 +157,13 @@ static struct platform_device *smdkc100_devices[] __initdata = { &s3c_device_hsmmc1, &s3c_device_hsmmc2, &smdkc100_lcd_powerdev, + &s5pc100_device_iis0, + &s5pc100_device_ac97, }; static void __init smdkc100_map_io(void) { - s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc)); + s5p_init_io(NULL, 0, S5P_VA_CHIPID); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs)); } @@ -178,10 +187,9 @@ static void __init smdkc100_machine_init(void) MACHINE_START(SMDKC100, "SMDKC100") /* Maintainer: Byungho Min <bhmin@samsung.com> */ - .phys_io = S5PC100_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc, - .boot_params = S5PC100_PA_SDRAM + 0x100, - + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S5P_PA_SDRAM + 0x100, .init_irq = s5pc100_init_irq, .map_io = smdkc100_map_io, .init_machine = smdkc100_machine_init, diff --git a/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c index 185c8941e644..7769c760c9ef 100644 --- a/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c @@ -1,8 +1,8 @@ -/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c +/* linux/arch/arm/plat-s5pc100/setup-sdhci-gpio.c * * Copyright 2009 Samsung Eletronics * - * S5PC1XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) + * S5PC100 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 7601c28e240b..0761eac9aaea 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -13,18 +13,68 @@ config CPU_S5PV210 bool select PLAT_S5P select S3C_PL330_DMA + select S5P_EXT_INT help Enable S5PV210 CPU support -choice - prompt "Select machine type" - depends on ARCH_S5PV210 - default MACH_SMDKV210 +config S5PV210_SETUP_I2C1 + bool + help + Common setup code for i2c bus 1. + +config S5PV210_SETUP_I2C2 + bool + help + Common setup code for i2c bus 2. + +config S5PV210_SETUP_FB_24BPP + bool + help + Common setup code for S5PV210 with an 24bpp RGB display helper. + +config S5PV210_SETUP_SDHCI + bool + select S5PV210_SETUP_SDHCI_GPIO + help + Internal helper functions for S5PV210 based SDHCI systems + +config S5PV210_SETUP_SDHCI_GPIO + bool + help + Common setup code for SDHCI gpio. + +# machine support + +config MACH_AQUILA + bool "Samsung Aquila" + select CPU_S5PV210 + select ARCH_SPARSEMEM_ENABLE + select S5PV210_SETUP_FB_24BPP + select S3C_DEV_FB + help + Machine support for the Samsung Aquila target based on S5PC110 SoC + +config MACH_GONI + bool "GONI" + select CPU_S5PV210 + select ARCH_SPARSEMEM_ENABLE + help + Machine support for Samsung GONI board + S5PC110(MCP) is one of package option of S5PV210 + +config S5PC110_DEV_ONENAND + bool + help + Compile in platform device definition for OneNAND1 controller config MACH_SMDKV210 bool "SMDKV210" select CPU_S5PV210 select ARCH_SPARSEMEM_ENABLE + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_TS + select S3C_DEV_WDT + select HAVE_S3C2410_WATCHDOG help Machine support for Samsung SMDKV210 @@ -32,10 +82,10 @@ config MACH_SMDKC110 bool "SMDKC110" select CPU_S5PV210 select ARCH_SPARSEMEM_ENABLE + select S3C_DEV_WDT + select HAVE_S3C2410_WATCHDOG help Machine support for Samsung SMDKC110 S5PC110(MCP) is one of package option of S5PV210 -endchoice - endif diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 99827813d293..30be9a6a4620 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -17,9 +17,19 @@ obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o # machine support +obj-$(CONFIG_MACH_AQUILA) += mach-aquila.o obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o +obj-$(CONFIG_MACH_GONI) += mach-goni.o # device support obj-y += dev-audio.o +obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o +obj-$(CONFIG_S5PC110_DEV_ONENAND) += dev-onenand.o + +obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o +obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o +obj-$(CONFIG_S5PV210_SETUP_SDHCI) += setup-sdhci.o +obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 2b776eb5d150..411a4a9cbfc7 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -32,6 +32,8 @@ #include <plat/devs.h> #include <plat/clock.h> #include <plat/s5pv210.h> +#include <plat/iic-core.h> +#include <plat/sdhci.h> /* Initial IO mappings */ @@ -74,7 +76,21 @@ static void s5pv210_idle(void) void __init s5pv210_map_io(void) { +#ifdef CONFIG_S3C_DEV_ADC + s3c_device_adc.name = "s3c64xx-adc"; +#endif + iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc)); + + /* initialise device information early */ + s5pv210_default_sdhci0(); + s5pv210_default_sdhci1(); + s5pv210_default_sdhci2(); + + /* the i2c devices are directly compatible with s3c2440 */ + s3c_i2c0_setname("s3c2440-i2c"); + s3c_i2c1_setname("s3c2440-i2c"); + s3c_i2c2_setname("s3c2440-i2c"); } void __init s5pv210_init_clocks(int xtal) diff --git a/arch/arm/mach-s5pv210/dev-onenand.c b/arch/arm/mach-s5pv210/dev-onenand.c new file mode 100644 index 000000000000..34997b752f93 --- /dev/null +++ b/arch/arm/mach-s5pv210/dev-onenand.c @@ -0,0 +1,50 @@ +/* + * linux/arch/arm/mach-s5pv210/dev-onenand.c + * + * Copyright (c) 2008-2010 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * S5PC110 series device definition for OneNAND devices + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/onenand.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +static struct resource s5pc110_onenand_resources[] = { + [0] = { + .start = S5PC110_PA_ONENAND, + .end = S5PC110_PA_ONENAND + SZ_128K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = S5PC110_PA_ONENAND_DMA, + .end = S5PC110_PA_ONENAND_DMA + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device s5pc110_device_onenand = { + .name = "s5pc110-onenand", + .id = -1, + .num_resources = ARRAY_SIZE(s5pc110_onenand_resources), + .resource = s5pc110_onenand_resources, +}; + +void s5pc110_onenand_set_platdata(struct onenand_platform_data *pdata) +{ + struct onenand_platform_data *pd; + + pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL); + if (!pd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + s5pc110_device_onenand.dev.platform_data = pd; +} diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c new file mode 100644 index 000000000000..337a62b57a0b --- /dev/null +++ b/arch/arm/mach-s5pv210/dev-spi.c @@ -0,0 +1,178 @@ +/* linux/arch/arm/mach-s5pv210/dev-spi.c + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <mach/dma.h> +#include <mach/map.h> +#include <mach/irqs.h> +#include <mach/gpio.h> +#include <mach/spi-clocks.h> + +#include <plat/s3c64xx-spi.h> +#include <plat/gpio-cfg.h> + +static char *spi_src_clks[] = { + [S5PV210_SPI_SRCCLK_PCLK] = "pclk", + [S5PV210_SPI_SRCCLK_SCLK] = "sclk_spi", +}; + +/* SPI Controller platform_devices */ + +/* Since we emulate multi-cs capability, we do not touch the CS. + * The emulated CS is toggled by board specific mechanism, as it can + * be either some immediate GPIO or some signal out of some other + * chip in between ... or some yet another way. + * We simply do not assume anything about CS. + */ +static int s5pv210_spi_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPB(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPB(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5PV210_GPB(1), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5PV210_GPB(2), S3C_GPIO_PULL_UP); + break; + + case 1: + s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPB(5), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPB(6), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5PV210_GPB(5), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5PV210_GPB(6), S3C_GPIO_PULL_UP); + break; + + default: + dev_err(&pdev->dev, "Invalid SPI Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct resource s5pv210_spi0_resource[] = { + [0] = { + .start = S5PV210_PA_SPI0, + .end = S5PV210_PA_SPI0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI0_TX, + .end = DMACH_SPI0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI0_RX, + .end = DMACH_SPI0_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI0, + .end = IRQ_SPI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64xx_spi_info s5pv210_spi0_pdata = { + .cfg_gpio = s5pv210_spi_cfg_gpio, + .fifo_lvl_mask = 0x1ff, + .rx_lvl_offset = 15, + .high_speed = 1, +}; + +static u64 spi_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5pv210_device_spi0 = { + .name = "s3c64xx-spi", + .id = 0, + .num_resources = ARRAY_SIZE(s5pv210_spi0_resource), + .resource = s5pv210_spi0_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5pv210_spi0_pdata, + }, +}; + +static struct resource s5pv210_spi1_resource[] = { + [0] = { + .start = S5PV210_PA_SPI1, + .end = S5PV210_PA_SPI1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI1_TX, + .end = DMACH_SPI1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI1_RX, + .end = DMACH_SPI1_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI1, + .end = IRQ_SPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64xx_spi_info s5pv210_spi1_pdata = { + .cfg_gpio = s5pv210_spi_cfg_gpio, + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 15, + .high_speed = 1, +}; + +struct platform_device s5pv210_device_spi1 = { + .name = "s3c64xx-spi", + .id = 1, + .num_resources = ARRAY_SIZE(s5pv210_spi1_resource), + .resource = s5pv210_spi1_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5pv210_spi1_pdata, + }, +}; + +void __init s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) +{ + struct s3c64xx_spi_info *pd; + + /* Reject invalid configuration */ + if (!num_cs || src_clk_nr < 0 + || src_clk_nr > S5PV210_SPI_SRCCLK_SCLK) { + printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); + return; + } + + switch (cntrlr) { + case 0: + pd = &s5pv210_spi0_pdata; + break; + case 1: + pd = &s5pv210_spi1_pdata; + break; + default: + printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", + __func__, cntrlr); + return; + } + + pd->num_cs = num_cs; + pd->src_clk_nr = src_clk_nr; + pd->src_clk_name = spi_src_clks[src_clk_nr]; +} diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index 62c5175ef291..92fc6c7fc064 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -17,22 +17,6 @@ /* VIC0: System, DMA, Timer */ -#define IRQ_EINT0 S5P_IRQ_VIC0(0) -#define IRQ_EINT1 S5P_IRQ_VIC0(1) -#define IRQ_EINT2 S5P_IRQ_VIC0(2) -#define IRQ_EINT3 S5P_IRQ_VIC0(3) -#define IRQ_EINT4 S5P_IRQ_VIC0(4) -#define IRQ_EINT5 S5P_IRQ_VIC0(5) -#define IRQ_EINT6 S5P_IRQ_VIC0(6) -#define IRQ_EINT7 S5P_IRQ_VIC0(7) -#define IRQ_EINT8 S5P_IRQ_VIC0(8) -#define IRQ_EINT9 S5P_IRQ_VIC0(9) -#define IRQ_EINT10 S5P_IRQ_VIC0(10) -#define IRQ_EINT11 S5P_IRQ_VIC0(11) -#define IRQ_EINT12 S5P_IRQ_VIC0(12) -#define IRQ_EINT13 S5P_IRQ_VIC0(13) -#define IRQ_EINT14 S5P_IRQ_VIC0(14) -#define IRQ_EINT15 S5P_IRQ_VIC0(15) #define IRQ_EINT16_31 S5P_IRQ_VIC0(16) #define IRQ_BATF S5P_IRQ_VIC0(17) #define IRQ_MDMA S5P_IRQ_VIC0(18) @@ -134,13 +118,25 @@ #define IRQ_MDNIE3 S5P_IRQ_VIC3(8) #define IRQ_VIC_END S5P_IRQ_VIC3(31) -#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1) +#define S5P_EINT_16_31_BASE (IRQ_VIC_END + 1) -#define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE) -#define IRQ_EINT(x) S5P_EINT(x) +#define EINT_MODE S3C_GPIO_SFN(0xf) + +#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_IRQ_VIC0(0)) \ + : ((x) + S5P_EINT_16_31_BASE)) /* Set the default NR_IRQS */ -#define NR_IRQS (IRQ_EINT(31) + 1) +#define NR_IRQS (IRQ_EINT(31) + 1) + +#define EINT_GPIO_0(x) S5PV210_GPH0(x) +#define EINT_GPIO_1(x) S5PV210_GPH1(x) +#define EINT_GPIO_2(x) S5PV210_GPH2(x) +#define EINT_GPIO_3(x) S5PV210_GPH3(x) + +/* Compatibility */ +#define IRQ_LCD_FIFO IRQ_LCD0 +#define IRQ_LCD_VSYNC IRQ_LCD1 +#define IRQ_LCD_SYSTEM IRQ_LCD2 #endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index 5adcb9f26e44..34eb168ec950 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -16,6 +16,9 @@ #include <plat/map-base.h> #include <plat/map-s5p.h> +#define S5PC110_PA_ONENAND (0xB0000000) +#define S5PC110_PA_ONENAND_DMA (0xB0600000) + #define S5PV210_PA_CHIPID (0xE0000000) #define S5P_PA_CHIPID S5PV210_PA_CHIPID @@ -25,13 +28,21 @@ #define S5PV210_PA_GPIO (0xE0200000) #define S5P_PA_GPIO S5PV210_PA_GPIO +/* SPI */ +#define S5PV210_PA_SPI0 0xE1300000 +#define S5PV210_PA_SPI1 0xE1400000 + #define S5PV210_PA_IIC0 (0xE1800000) +#define S5PV210_PA_IIC1 (0xFAB00000) +#define S5PV210_PA_IIC2 (0xE1A00000) #define S5PV210_PA_TIMER (0xE2500000) #define S5P_PA_TIMER S5PV210_PA_TIMER #define S5PV210_PA_SYSTIMER (0xE2600000) +#define S5PV210_PA_WATCHDOG (0xE2700000) + #define S5PV210_PA_UART (0xE2900000) #define S5P_PA_UART0 (S5PV210_PA_UART + 0x0) @@ -47,6 +58,10 @@ #define S5PV210_PA_PDMA0 0xE0900000 #define S5PV210_PA_PDMA1 0xE0A00000 +#define S5PV210_PA_FB (0xF8000000) + +#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) + #define S5PV210_PA_VIC0 (0xF2000000) #define S5P_PA_VIC0 S5PV210_PA_VIC0 @@ -75,8 +90,19 @@ /* AC97 */ #define S5PV210_PA_AC97 0xE2200000 +#define S5PV210_PA_ADC (0xE1700000) + /* compatibiltiy defines. */ #define S3C_PA_UART S5PV210_PA_UART +#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0) +#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1) +#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2) #define S3C_PA_IIC S5PV210_PA_IIC0 +#define S3C_PA_IIC1 S5PV210_PA_IIC1 +#define S3C_PA_IIC2 S5PV210_PA_IIC2 +#define S3C_PA_FB S5PV210_PA_FB +#define S3C_PA_WDT S5PV210_PA_WATCHDOG + +#define SAMSUNG_PA_ADC S5PV210_PA_ADC #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h index e56e0e4673ed..2a25ab40c863 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h @@ -126,6 +126,7 @@ #define S5P_RST_STAT S5P_CLKREG(0xA000) #define S5P_OSC_CON S5P_CLKREG(0x8000) +#define S5P_MDNIE_SEL S5P_CLKREG(0x7008) #define S5P_MIPI_PHY_CON0 S5P_CLKREG(0x7200) #define S5P_MIPI_PHY_CON1 S5P_CLKREG(0x7204) #define S5P_MIPI_CONTROL S5P_CLKREG(0xE814) diff --git a/arch/arm/mach-s5pv210/include/mach/regs-fb.h b/arch/arm/mach-s5pv210/include/mach/regs-fb.h new file mode 100644 index 000000000000..60d992989bdc --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/regs-fb.h @@ -0,0 +1,21 @@ +/* + * Copyright 2010 Ben Dooks <ben-linux@fluff.org> + * + * Dummy framebuffer to allow build for the moment. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MACH_REGS_FB_H +#define __ASM_ARCH_MACH_REGS_FB_H __FILE__ + +#include <plat/regs-fb-v4.h> + +static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg) +{ + return 0x2400 + (window * 256 *4 ) + reg; +} + +#endif /* __ASM_ARCH_MACH_REGS_FB_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h new file mode 100644 index 000000000000..6d068091c36c --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h @@ -0,0 +1,44 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/regs-gpio.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV210 - GPIO (including EINT) register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_GPIO_H +#define __ASM_ARCH_REGS_GPIO_H __FILE__ + +#include <mach/map.h> + +#define S5PV210_EINT30CON (S5P_VA_GPIO + 0xE00) +#define S5P_EINT_CON(x) (S5PV210_EINT30CON + ((x) * 0x4)) + +#define S5PV210_EINT30FLTCON0 (S5P_VA_GPIO + 0xE80) +#define S5P_EINT_FLTCON(x) (S5PV210_EINT30FLTCON0 + ((x) * 0x4)) + +#define S5PV210_EINT30MASK (S5P_VA_GPIO + 0xF00) +#define S5P_EINT_MASK(x) (S5PV210_EINT30MASK + ((x) * 0x4)) + +#define S5PV210_EINT30PEND (S5P_VA_GPIO + 0xF40) +#define S5P_EINT_PEND(x) (S5PV210_EINT30PEND + ((x) * 0x4)) + +#define eint_offset(irq) ((irq) < IRQ_EINT16_31 ? ((irq) - IRQ_EINT(0)) \ + : ((irq) - S5P_EINT_16_31_BASE)) + +#define EINT_REG_NR(x) (eint_offset(x) >> 3) + +#define eint_irq_to_bit(irq) (1 << (eint_offset(irq) & 0x7)) + +/* values for S5P_EXTINT0 */ +#define S5P_EXTINT_LOWLEV (0x00) +#define S5P_EXTINT_HILEV (0x01) +#define S5P_EXTINT_FALLEDGE (0x02) +#define S5P_EXTINT_RISEEDGE (0x03) +#define S5P_EXTINT_BOTHEDGE (0x04) + +#endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/spi-clocks.h b/arch/arm/mach-s5pv210/include/mach/spi-clocks.h new file mode 100644 index 000000000000..02acded5f73d --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/spi-clocks.h @@ -0,0 +1,17 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/spi-clocks.h + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __S5PV210_PLAT_SPI_CLKS_H +#define __S5PV210_PLAT_SPI_CLKS_H __FILE__ + +#define S5PV210_SPI_SRCCLK_PCLK 0 +#define S5PV210_SPI_SRCCLK_SCLK 1 + +#endif /* __S5PV210_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c new file mode 100644 index 000000000000..10bc76ec4025 --- /dev/null +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -0,0 +1,149 @@ +/* linux/arch/arm/mach-s5pv210/mach-aquila.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/fb.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/setup.h> +#include <asm/mach-types.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/regs-fb.h> + +#include <plat/regs-serial.h> +#include <plat/s5pv210.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/fb.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, +}; + +/* Frame Buffer */ +static struct s3c_fb_pd_win aquila_fb_win0 = { + .win_mode = { + .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60), + .left_margin = 16, + .right_margin = 16, + .upper_margin = 3, + .lower_margin = 28, + .hsync_len = 2, + .vsync_len = 2, + .xres = 480, + .yres = 800, + }, + .max_bpp = 32, + .default_bpp = 16, +}; + +static struct s3c_fb_pd_win aquila_fb_win1 = { + .win_mode = { + .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60), + .left_margin = 16, + .right_margin = 16, + .upper_margin = 3, + .lower_margin = 28, + .hsync_len = 2, + .vsync_len = 2, + .xres = 480, + .yres = 800, + }, + .max_bpp = 32, + .default_bpp = 16, +}; + +static struct s3c_fb_platdata aquila_lcd_pdata __initdata = { + .win[0] = &aquila_fb_win0, + .win[1] = &aquila_fb_win1, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | + VIDCON1_INV_VCLK | VIDCON1_INV_VDEN, + .setup_gpio = s5pv210_fb_gpio_setup_24bpp, +}; + +static struct platform_device *aquila_devices[] __initdata = { + &s3c_device_fb, +}; + +static void __init aquila_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); +} + +static void __init aquila_machine_init(void) +{ + /* FB */ + s3c_fb_set_platdata(&aquila_lcd_pdata); + + platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices)); +} + +MACHINE_START(AQUILA, "Aquila") + /* Maintainers: + Marek Szyprowski <m.szyprowski@samsung.com> + Kyungmin Park <kyungmin.park@samsung.com> */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = s5pv210_init_irq, + .map_io = aquila_map_io, + .init_machine = aquila_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c new file mode 100644 index 000000000000..4863b13824e4 --- /dev/null +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -0,0 +1,98 @@ +/* linux/arch/arm/mach-s5pv210/mach-goni.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/setup.h> +#include <asm/mach-types.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/regs-serial.h> +#include <plat/s5pv210.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, +}; + +static struct platform_device *goni_devices[] __initdata = { +}; + +static void __init goni_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs)); +} + +static void __init goni_machine_init(void) +{ + platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices)); +} + +MACHINE_START(GONI, "GONI") + /* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = s5pv210_init_irq, + .map_io = goni_map_io, + .init_machine = goni_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index 6f9fd3274e2e..4c8903c6d104 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -74,6 +74,7 @@ static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = { static struct platform_device *smdkc110_devices[] __initdata = { &s5pv210_device_iis0, &s5pv210_device_ac97, + &s3c_device_wdt, }; static void __init smdkc110_map_io(void) diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 3c29e18528a5..0d4627948040 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -25,6 +25,8 @@ #include <plat/s5pv210.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/adc.h> +#include <plat/ts.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -74,6 +76,15 @@ static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = { static struct platform_device *smdkv210_devices[] __initdata = { &s5pv210_device_iis0, &s5pv210_device_ac97, + &s3c_device_adc, + &s3c_device_ts, + &s3c_device_wdt, +}; + +static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, }; static void __init smdkv210_map_io(void) @@ -85,6 +96,7 @@ static void __init smdkv210_map_io(void) static void __init smdkv210_machine_init(void) { + s3c24xx_ts_set_platdata(&s3c_ts_platform); platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices)); } diff --git a/arch/arm/mach-s5pv210/setup-fb-24bpp.c b/arch/arm/mach-s5pv210/setup-fb-24bpp.c new file mode 100644 index 000000000000..a50cbac8720d --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-fb-24bpp.c @@ -0,0 +1,62 @@ +/* linux/arch/arm/plat-s5pv210/setup-fb-24bpp.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Base s5pv210 setup information for 24bpp LCD framebuffer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/fb.h> + +#include <mach/regs-fb.h> +#include <mach/gpio.h> +#include <mach/map.h> +#include <plat/fb.h> +#include <mach/regs-clock.h> +#include <plat/gpio-cfg.h> + +void s5pv210_fb_gpio_setup_24bpp(void) +{ + unsigned int gpio = 0; + + for (gpio = S5PV210_GPF0(0); gpio <= S5PV210_GPF0(7); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + for (gpio = S5PV210_GPF1(0); gpio <= S5PV210_GPF1(7); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + for (gpio = S5PV210_GPF2(0); gpio <= S5PV210_GPF2(7); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + for (gpio = S5PV210_GPF3(0); gpio <= S5PV210_GPF3(3); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + /* Set DISPLAY_CONTROL register for Display path selection. + * + * ouput | RGB | I80 | ITU + * ----------------------------------- + * 00 | MIE | FIMD | FIMD + * 01 | MDNIE | MDNIE | FIMD + * 10 | FIMD | FIMD | FIMD + * 11 | FIMD | FIMD | FIMD + */ + writel(0x2, S5P_MDNIE_SEL); +} diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c index 9ec6845840e5..c718253c70b8 100644 --- a/arch/arm/mach-s5pv210/setup-i2c0.c +++ b/arch/arm/mach-s5pv210/setup-i2c0.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s5pv210/setup-i2c0.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * * I2C0 GPIO configuration. @@ -17,9 +17,14 @@ struct platform_device; /* don't need the contents */ +#include <mach/gpio.h> #include <plat/iic.h> +#include <plat/gpio-cfg.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - /* Will be populated later */ + s3c_gpio_cfgpin(S5PV210_GPD1(0), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPD1(0), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPD1(1), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPD1(1), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c new file mode 100644 index 000000000000..45e0e6ed2ed0 --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-i2c1.c @@ -0,0 +1,30 @@ +/* linux/arch/arm/mach-s5pv210/setup-i2c1.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * I2C1 GPIO configuration. + * + * Based on plat-s3c64xx/setup-i2c1.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> + +struct platform_device; /* don't need the contents */ + +#include <mach/gpio.h> +#include <plat/iic.h> +#include <plat/gpio-cfg.h> + +void s3c_i2c1_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5PV210_GPD1(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPD1(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPD1(3), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPD1(3), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c new file mode 100644 index 000000000000..b11b4bff69ac --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-i2c2.c @@ -0,0 +1,30 @@ +/* linux/arch/arm/mach-s5pv210/setup-i2c2.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * I2C2 GPIO configuration. + * + * Based on plat-s3c64xx/setup-i2c0.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> + +struct platform_device; /* don't need the contents */ + +#include <mach/gpio.h> +#include <plat/iic.h> +#include <plat/gpio-cfg.h> + +void s3c_i2c2_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5PV210_GPD1(4), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPD1(4), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPD1(5), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPD1(5), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c new file mode 100644 index 000000000000..fe7d86dad14c --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c @@ -0,0 +1,104 @@ +/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> + +#include <mach/gpio.h> +#include <plat/gpio-cfg.h> +#include <plat/regs-sdhci.h> + +void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + + /* Set all the necessary GPG0/GPG1 pins to special-function 2 */ + for (gpio = S5PV210_GPG0(0); gpio < S5PV210_GPG0(2); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + switch (width) { + case 8: + /* GPG1[3:6] special-funtion 3 */ + for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + case 4: + /* GPG0[3:6] special-funtion 2 */ + for (gpio = S5PV210_GPG0(3); gpio <= S5PV210_GPG0(6); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + default: + break; + } + + s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2)); +} + +void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + + /* Set all the necessary GPG1[0:1] pins to special-function 2 */ + for (gpio = S5PV210_GPG1(0); gpio < S5PV210_GPG1(2); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + /* Data pin GPG1[3:6] to special-function 2 */ + for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2)); +} + +void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + + /* Set all the necessary GPG2[0:1] pins to special-function 2 */ + for (gpio = S5PV210_GPG2(0); gpio < S5PV210_GPG2(2); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + switch (width) { + case 8: + /* Data pin GPG3[3:6] to special-function 3 */ + for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + case 4: + /* Data pin GPG2[3:6] to special-function 2 */ + for (gpio = S5PV210_GPG2(3); gpio <= S5PV210_GPG2(6); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + default: + break; + } + + s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2)); +} diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c new file mode 100644 index 000000000000..51815ec60c2a --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-sdhci.c @@ -0,0 +1,63 @@ +/* linux/arch/arm/mach-s5pv210/setup-sdhci.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - Helper functions for settign up SDHCI device(s) (HSMMC) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> + +#include <plat/regs-sdhci.h> +#include <plat/sdhci.h> + +/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ + +char *s5pv210_hsmmc_clksrcs[4] = { + [0] = "hsmmc", /* HCLK */ + [1] = "hsmmc", /* HCLK */ + [2] = "sclk_mmc", /* mmc_bus */ + /*[4] = reserved */ +}; + +void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card) +{ + u32 ctrl2, ctrl3; + + /* don't need to alter anything acording to card-type */ + + writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); + + ctrl2 = readl(r + S3C_SDHCI_CONTROL2); + ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; + ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | + S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | + S3C_SDHCI_CTRL2_ENFBCLKRX | + S3C_SDHCI_CTRL2_DFCNT_NONE | + S3C_SDHCI_CTRL2_ENCLKOUTHOLD); + + if (ios->clock < 25 * 1000000) + ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | + S3C_SDHCI_CTRL3_FCSEL2 | + S3C_SDHCI_CTRL3_FCSEL1 | + S3C_SDHCI_CTRL3_FCSEL0); + else + ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); + + writel(ctrl2, r + S3C_SDHCI_CONTROL2); + writel(ctrl3, r + S3C_SDHCI_CONTROL3); +} diff --git a/arch/arm/mach-sa1100/leds.c b/arch/arm/mach-sa1100/leds.c index 4cf7c565aaed..bbfe197fb4d6 100644 --- a/arch/arm/mach-sa1100/leds.c +++ b/arch/arm/mach-sa1100/leds.c @@ -2,7 +2,7 @@ * linux/arch/arm/mach-sa1100/leds.c * * SA1100 LEDs dispatcher - * + * * Copyright (C) 2001 Nicolas Pitre */ #include <linux/compiler.h> @@ -18,10 +18,10 @@ sa1100_leds_init(void) { if (machine_is_assabet()) leds_event = assabet_leds_event; - if (machine_is_consus()) - leds_event = consus_leds_event; + if (machine_is_consus()) + leds_event = consus_leds_event; if (machine_is_badge4()) - leds_event = badge4_leds_event; + leds_event = badge4_leds_event; if (machine_is_brutus()) leds_event = brutus_leds_event; if (machine_is_cerf()) diff --git a/arch/arm/mach-shark/pci.c b/arch/arm/mach-shark/pci.c index 37a7112d4117..89d175ce74d2 100644 --- a/arch/arm/mach-shark/pci.c +++ b/arch/arm/mach-shark/pci.c @@ -16,16 +16,19 @@ static int __init shark_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { if (dev->bus->number == 0) - if (dev->devfn == 0) return 255; - else return 11; - else return 255; + if (dev->devfn == 0) + return 255; + else + return 11; + else + return 255; } extern void __init via82c505_preinit(void); static struct hw_pci shark_pci __initdata = { .setup = via82c505_setup, - .swizzle = pci_std_swizzle, + .swizzle = pci_std_swizzle, .map_irq = shark_map_irq, .nr_controllers = 1, .scan = via82c505_scan_bus, diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index b67e571d4bf7..baf6bcc3169c 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -13,7 +13,6 @@ #include <linux/types.h> #include <linux/amba/pl061.h> -#include <linux/types.h> #include <linux/ptrace.h> #include <linux/io.h> #include <asm/hardware/vic.h> diff --git a/arch/arm/mach-u300/include/mach/coh901318.h b/arch/arm/mach-u300/include/mach/coh901318.h index b8155b4e5ffa..193da2df732c 100644 --- a/arch/arm/mach-u300/include/mach/coh901318.h +++ b/arch/arm/mach-u300/include/mach/coh901318.h @@ -103,27 +103,6 @@ struct coh901318_platform { }; /** - * coh901318_get_bytes_left() - Get number of bytes left on a current transfer - * @chan: dma channel handle - * return number of bytes left, or negative on error - */ -u32 coh901318_get_bytes_left(struct dma_chan *chan); - -/** - * coh901318_stop() - Stops dma transfer - * @chan: dma channel handle - * return 0 on success otherwise negative value - */ -void coh901318_stop(struct dma_chan *chan); - -/** - * coh901318_continue() - Resumes a stopped dma transfer - * @chan: dma channel handle - * return 0 on success otherwise negative value - */ -void coh901318_continue(struct dma_chan *chan); - -/** * coh901318_filter_id() - DMA channel filter function * @chan: dma channel handle * @chan_id: id of dma channel to be filter out diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index e2958eb567f9..b2eda4dc1c34 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -423,6 +423,33 @@ void nuc900_fb_set_platdata(struct nuc900fb_mach_info *pd) } #endif +/* AUDIO controller*/ +static u64 nuc900_device_audio_dmamask = -1; +static struct resource nuc900_ac97_resource[] = { + [0] = { + .start = W90X900_PA_ACTL, + .end = W90X900_PA_ACTL + W90X900_SZ_ACTL - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_ACTL, + .end = IRQ_ACTL, + .flags = IORESOURCE_IRQ, + } + +}; + +struct platform_device nuc900_device_audio = { + .name = "nuc900-audio", + .id = -1, + .num_resources = ARRAY_SIZE(nuc900_ac97_resource), + .resource = nuc900_ac97_resource, + .dev = { + .dma_mask = &nuc900_device_audio_dmamask, + .coherent_dma_mask = -1, + } +}; + /*Here should be your evb resourse,such as LCD*/ static struct platform_device *nuc900_public_dev[] __initdata = { @@ -434,6 +461,7 @@ static struct platform_device *nuc900_public_dev[] __initdata = { &nuc900_device_emc, &nuc900_device_spi, &nuc900_device_wdt, + &nuc900_device_audio, }; /* Provide adding specific CPU platform devices API */ diff --git a/arch/arm/mach-w90x900/include/mach/mfp.h b/arch/arm/mach-w90x900/include/mach/mfp.h new file mode 100644 index 000000000000..94c0e71617c6 --- /dev/null +++ b/arch/arm/mach-w90x900/include/mach/mfp.h @@ -0,0 +1,24 @@ +/* + * arch/arm/mach-w90x900/include/mach/mfp.h + * + * Copyright (c) 2010 Nuvoton technology corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * Based on arch/arm/mach-s3c2410/include/mach/map.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#ifndef __ASM_ARCH_MFP_H +#define __ASM_ARCH_MFP_H + +extern void mfp_set_groupf(struct device *dev); +extern void mfp_set_groupc(struct device *dev); +extern void mfp_set_groupi(struct device *dev); +extern void mfp_set_groupg(struct device *dev); + +#endif /* __ASM_ARCH_MFP_H */ diff --git a/arch/arm/mach-w90x900/mfp.c b/arch/arm/mach-w90x900/mfp.c index a47dc9a708ee..fb7fb627b1a5 100644 --- a/arch/arm/mach-w90x900/mfp.c +++ b/arch/arm/mach-w90x900/mfp.c @@ -36,9 +36,12 @@ #define GPIOG0TO1 (0x03 << 14) #define GPIOG2TO3 (0x03 << 16) +#define GPIOG22TO23 (0x03 << 22) + #define ENSPI (0x0a << 14) #define ENI2C0 (0x01 << 14) #define ENI2C1 (0x01 << 16) +#define ENAC97 (0x02 << 22) static DEFINE_MUTEX(mfp_mutex); @@ -146,6 +149,9 @@ void mfp_set_groupg(struct device *dev) } else if (strcmp(dev_id, "nuc900-i2c1") == 0) { mfpen &= ~(GPIOG2TO3); mfpen |= ENI2C1;/*enable i2c1*/ + } else if (strcmp(dev_id, "nuc900-audio") == 0) { + mfpen &= ~(GPIOG22TO23); + mfpen |= ENAC97;/*enable AC97*/ } else { mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/ } diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 06a90dcfc60a..37c8157e116e 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -91,7 +91,11 @@ ENTRY(v7_flush_kern_cache_all) THUMB( stmfd sp!, {r4-r7, r9-r11, lr} ) bl v7_flush_dcache_all mov r0, #0 +#ifdef CONFIG_SMP + mcr p15, 0, r0, c7, c1, 0 @ invalidate I-cache inner shareable +#else mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate +#endif ARM( ldmfd sp!, {r4-r5, r7, r9-r11, lr} ) THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} ) mov pc, lr diff --git a/arch/arm/nwfpe/ChangeLog b/arch/arm/nwfpe/ChangeLog index eeb5a7c5ff09..fa8028b1e1cf 100644 --- a/arch/arm/nwfpe/ChangeLog +++ b/arch/arm/nwfpe/ChangeLog @@ -72,7 +72,7 @@ 1998-11-23 Scott Bambrough <scottb@netwinder.org> * README.FPE - fix typo in description of lfm/sfm instructions - * NOTES - Added file to describe known bugs/problems + * NOTES - Added file to describe known bugs/problems * fpmodule.c - Changed version number to 0.94 1998-11-20 Scott Bambrough <scottb@netwinder.org> diff --git a/arch/arm/nwfpe/fpsr.h b/arch/arm/nwfpe/fpsr.h index 859b300d89fd..bd425dc13b61 100644 --- a/arch/arm/nwfpe/fpsr.h +++ b/arch/arm/nwfpe/fpsr.h @@ -30,7 +30,7 @@ one byte. EXCEPTION TRAP ENABLE BYTE SYSTEM CONTROL BYTE CUMULATIVE EXCEPTION FLAGS BYTE - + The FPCR is a 32 bit register consisting of bit flags. */ diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c index cb0b63874482..2a8646173c2f 100644 --- a/arch/arm/plat-mxc/ehci.c +++ b/arch/arm/plat-mxc/ehci.c @@ -1,5 +1,6 @@ /* * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * Copyright (C) 2010 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -50,7 +51,26 @@ #define MX35_H1_TLL_BIT (1 << 5) #define MX35_H1_USBTE_BIT (1 << 4) -int mxc_set_usbcontrol(int port, unsigned int flags) +#define MXC_OTG_OFFSET 0 +#define MXC_H1_OFFSET 0x200 + +/* USB_CTRL */ +#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27) /* OTG wakeup intr enable */ +#define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */ +#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */ +#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */ +#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */ + +/* USB_PHY_CTRL_FUNC */ +#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */ +#define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */ + +#define MXC_USBCMD_OFFSET 0x140 + +/* USBCMD */ +#define MXC_UCMD_ITC_NO_THRESHOLD_MASK (~(0xff << 16)) /* Interrupt Threshold Control */ + +int mxc_initialize_usb_hw(int port, unsigned int flags) { unsigned int v; #ifdef CONFIG_ARCH_MX3 @@ -186,9 +206,85 @@ int mxc_set_usbcontrol(int port, unsigned int flags) return 0; } #endif /* CONFIG_MACH_MX27 */ +#ifdef CONFIG_ARCH_MX51 + if (cpu_is_mx51()) { + void __iomem *usb_base; + u32 usbotg_base; + u32 usbother_base; + int ret = 0; + + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + + switch (port) { + case 0: /* OTG port */ + usbotg_base = usb_base + MXC_OTG_OFFSET; + break; + case 1: /* Host 1 port */ + usbotg_base = usb_base + MXC_H1_OFFSET; + break; + default: + printk(KERN_ERR"%s no such port %d\n", __func__, port); + ret = -ENOENT; + goto error; + } + usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; + + switch (port) { + case 0: /*OTG port */ + if (flags & MXC_EHCI_INTERNAL_PHY) { + v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v |= (MXC_OTG_PHYCTRL_OC_DIS_BIT | MXC_OTG_UCTRL_OPM_BIT); /* OC/USBPWR is not used */ + else + v &= ~(MXC_OTG_PHYCTRL_OC_DIS_BIT | MXC_OTG_UCTRL_OPM_BIT); /* OC/USBPWR is used */ + __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + + v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); + if (flags & MXC_EHCI_WAKEUP_ENABLED) + v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */ + else + v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */ + __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); + } + break; + case 1: /* Host 1 */ + /*Host ULPI */ + v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); + if (flags & MXC_EHCI_WAKEUP_ENABLED) + v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);/* HOST1 wakeup/ULPI intr disable */ + else + v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);/* HOST1 wakeup/ULPI intr disable */ + + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ + else + v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ + __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); + + v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */ + else + v |= MXC_H1_OC_DIS_BIT; /* OC is not used */ + __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + + v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET); + if (flags & MXC_EHCI_ITC_NO_THRESHOLD) + /* Interrupt Threshold Control:Immediate (no threshold) */ + v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK; + __raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET); + break; + } + +error: + iounmap(usb_base); + return ret; + } +#endif printk(KERN_WARNING "%s() unable to setup USBCONTROL for this CPU\n", __func__); return -EINVAL; } -EXPORT_SYMBOL(mxc_set_usbcontrol); +EXPORT_SYMBOL(mxc_initialize_usb_hw); diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index 70b23893f094..71437c61cfd7 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -3,7 +3,7 @@ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de * * Based on code from Freescale, - * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -38,7 +38,6 @@ static int gpio_table_size; #define GPIO_ICR2 (cpu_is_mx1_mx2() ? 0x2C : 0x10) #define GPIO_IMR (cpu_is_mx1_mx2() ? 0x30 : 0x14) #define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18) -#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18) #define GPIO_INT_LOW_LEV (cpu_is_mx1_mx2() ? 0x3 : 0x0) #define GPIO_INT_HIGH_LEV (cpu_is_mx1_mx2() ? 0x2 : 0x1) @@ -289,7 +288,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) /* its a serious configuration bug when it fails */ BUG_ON( gpiochip_add(&port[i].chip) < 0 ); - if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25()) { + if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) { /* setup one handler for each entry */ set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler); set_irq_data(port[i].irq, &port[i]); diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h index fc5fec9b55f0..36ff3cedee1a 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h @@ -26,6 +26,7 @@ enum mx31moboard_boards { MX31DEVBOARD = 1, MX31MARXBOT = 2, MX31SMARTBOT = 3, + MX31EYEBOT = 4, }; /* @@ -35,7 +36,7 @@ enum mx31moboard_boards { extern void mx31moboard_devboard_init(void); extern void mx31moboard_marxbot_init(void); -extern void mx31moboard_smartbot_init(void); +extern void mx31moboard_smartbot_init(int board); #endif diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index e51465d7b224..cbaed295a2bf 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -719,6 +719,23 @@ enum iomux_pins { #define MX31_PIN_SRXD5__SRXD5 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_FUNC) #define MX31_PIN_SCK5__SCK5 IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC) #define MX31_PIN_SFS5__SFS5 IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_ROW0_KEY_ROW0 IOMUX_MODE(MX31_PIN_KEY_ROW0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_ROW1_KEY_ROW1 IOMUX_MODE(MX31_PIN_KEY_ROW1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_ROW2_KEY_ROW2 IOMUX_MODE(MX31_PIN_KEY_ROW2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_ROW3_KEY_ROW3 IOMUX_MODE(MX31_PIN_KEY_ROW3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_ROW4_KEY_ROW4 IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_ROW5_KEY_ROW5 IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_ROW6_KEY_ROW6 IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_ROW7_KEY_ROW7 IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_COL0_KEY_COL0 IOMUX_MODE(MX31_PIN_KEY_COL0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_COL1_KEY_COL1 IOMUX_MODE(MX31_PIN_KEY_COL1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_COL2_KEY_COL2 IOMUX_MODE(MX31_PIN_KEY_COL2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_COL3_KEY_COL3 IOMUX_MODE(MX31_PIN_KEY_COL3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_COL4_KEY_COL4 IOMUX_MODE(MX31_PIN_KEY_COL4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_COL5_KEY_COL5 IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_COL6_KEY_COL6 IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_COL7_KEY_COL7 IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_FUNC) + /* * XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed with cspi2_ss0, diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h index b4f975e6a665..ab0f95d953d0 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h @@ -1,5 +1,6 @@ /* * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> + * Copyright (C) 2010 Freescale Semiconductor, Inc. * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License @@ -37,6 +38,11 @@ typedef enum iomux_config { PAD_CTL_SRE_FAST) #define MX51_UART3_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \ PAD_CTL_SRE_FAST) +#define MX51_USBH1_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ + PAD_CTL_PKE | PAD_CTL_HYS) +#define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | \ + PAD_CTL_SRE_FAST) /* * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode> @@ -57,6 +63,7 @@ typedef enum iomux_config { #define MX51_PAD_GPIO_2_3__EIM_D19 IOMUX_PAD(0x3fc, 0x068, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO_2_4__EIM_D20 IOMUX_PAD(0x400, 0x06c, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO_2_5__EIM_D21 IOMUX_PAD(0x404, 0x070, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D21__GPIO_2_5 IOMUX_PAD(0x404, 0x070, IOMUX_CONFIG_ALT1, 0x0, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO_2_6__EIM_D22 IOMUX_PAD(0x408, 0x074, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO_2_7__EIM_D23 IOMUX_PAD(0x40c, 0x078, 1, 0x0, 0, NO_PAD_CTRL) @@ -208,18 +215,19 @@ typedef enum iomux_config { #define MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_25__USBH1_CLK IOMUX_PAD(0x678, 0x278, 2, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_26__USBH1_DIR IOMUX_PAD(0x67C, 0x27C, 2, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_27__USBH1_STP IOMUX_PAD(0x680, 0x280, 2, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_28__USBH1_NXT IOMUX_PAD(0x684, 0x284, 2, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_11__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 2, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_12__USBH1_DATA1 IOMUX_PAD(0x68C, 0x28C, 2, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_13__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 2, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_14__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 2, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_15__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 2, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_16__USBH1_DATA5 IOMUX_PAD(0x69C, 0x29C, 2, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_17__USBH1_DATA6 IOMUX_PAD(0x6A0, 0x2A0, 2, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_18__USBH1_DATA7 IOMUX_PAD(0x6A4, 0x2A4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_USBH1_CLK__USBH1_CLK IOMUX_PAD(0x678, 0x278, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DIR__USBH1_DIR IOMUX_PAD(0x67C, 0x27C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_STP__USBH1_STP IOMUX_PAD(0x680, 0x280, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_STP__GPIO_1_27 IOMUX_PAD(0x680, 0x280, IOMUX_CONFIG_GPIO, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_NXT__USBH1_NXT IOMUX_PAD(0x684, 0x284, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA0__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA1__USBH1_DATA1 IOMUX_PAD(0x68C, 0x28C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA2__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA3__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA4__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA5__USBH1_DATA5 IOMUX_PAD(0x69C, 0x29C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6A0, 0x2A0, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6A4, 0x2A4, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) #define MX51_PAD_GPIO_3_0__DI1_PIN11 IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO_3_1__DI1_PIN12 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO_3_2__DI1_PIN13 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL) @@ -299,7 +307,7 @@ typedef enum iomux_config { #define MX51_PAD_GPIO_1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO_1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO_1_6__GPIO1_6 IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO_1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO_1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, \ (PAD_CTL_SRE_SLOW | PAD_CTL_DSE_MED | PAD_CTL_PUS_100K_UP | PAD_CTL_HYS)) #define MX51_PAD_GPIO_1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL) diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h index 4b9b8368c0c0..7fc5f9946199 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h +++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h @@ -25,6 +25,18 @@ #define MXC_EHCI_INTERNAL_PHY (1 << 7) #define MXC_EHCI_IPPUE_DOWN (1 << 8) #define MXC_EHCI_IPPUE_UP (1 << 9) +#define MXC_EHCI_WAKEUP_ENABLED (1 << 10) +#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 11) + +#define MXC_USBCTRL_OFFSET 0 +#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8 +#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc + +#define MX5_USBOTHER_REGS_OFFSET 0x800 + +/* USB_PHY_CTRL_FUNC2*/ +#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK 0x3 +#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT 0 struct mxc_usbh_platform_data { int (*init)(struct platform_device *pdev); @@ -35,7 +47,7 @@ struct mxc_usbh_platform_data { struct otg_transceiver *otg; }; -int mxc_set_usbcontrol(int port, unsigned int flags); +int mxc_initialize_usb_hw(int port, unsigned int flags); #endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */ diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index c1ce51abdba6..f9a1b059a76c 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -54,14 +54,14 @@ #define MX2_TSTAT_COMP (1 << 0) /* MX31, MX35, MX25, MXC91231, MX5 */ -#define MX3_TCTL_WAITEN (1 << 3) /* Wait enable mode */ -#define MX3_TCTL_CLK_IPG (1 << 6) -#define MX3_TCTL_FRR (1 << 9) -#define MX3_IR 0x0c -#define MX3_TSTAT 0x08 -#define MX3_TSTAT_OF1 (1 << 0) -#define MX3_TCN 0x24 -#define MX3_TCMP 0x10 +#define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */ +#define V2_TCTL_CLK_IPG (1 << 6) +#define V2_TCTL_FRR (1 << 9) +#define V2_IR 0x0c +#define V2_TSTAT 0x08 +#define V2_TSTAT_OF1 (1 << 0) +#define V2_TCN 0x24 +#define V2_TCMP 0x10 #define timer_is_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27()) #define timer_is_v2() (!timer_is_v1()) @@ -76,7 +76,7 @@ static inline void gpt_irq_disable(void) unsigned int tmp; if (timer_is_v2()) - __raw_writel(0, timer_base + MX3_IR); + __raw_writel(0, timer_base + V2_IR); else { tmp = __raw_readl(timer_base + MXC_TCTL); __raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL); @@ -86,7 +86,7 @@ static inline void gpt_irq_disable(void) static inline void gpt_irq_enable(void) { if (timer_is_v2()) - __raw_writel(1<<0, timer_base + MX3_IR); + __raw_writel(1<<0, timer_base + V2_IR); else { __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL); @@ -102,7 +102,7 @@ static void gpt_irq_acknowledge(void) __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT); } else if (timer_is_v2()) - __raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT); + __raw_writel(V2_TSTAT_OF1, timer_base + V2_TSTAT); } static cycle_t mx1_2_get_cycles(struct clocksource *cs) @@ -110,9 +110,9 @@ static cycle_t mx1_2_get_cycles(struct clocksource *cs) return __raw_readl(timer_base + MX1_2_TCN); } -static cycle_t mx3_get_cycles(struct clocksource *cs) +static cycle_t v2_get_cycles(struct clocksource *cs) { - return __raw_readl(timer_base + MX3_TCN); + return __raw_readl(timer_base + V2_TCN); } static struct clocksource clocksource_mxc = { @@ -129,7 +129,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk) unsigned int c = clk_get_rate(timer_clk); if (timer_is_v2()) - clocksource_mxc.read = mx3_get_cycles; + clocksource_mxc.read = v2_get_cycles; clocksource_mxc.mult = clocksource_hz2mult(c, clocksource_mxc.shift); @@ -153,16 +153,16 @@ static int mx1_2_set_next_event(unsigned long evt, -ETIME : 0; } -static int mx3_set_next_event(unsigned long evt, +static int v2_set_next_event(unsigned long evt, struct clock_event_device *unused) { unsigned long tcmp; - tcmp = __raw_readl(timer_base + MX3_TCN) + evt; + tcmp = __raw_readl(timer_base + V2_TCN) + evt; - __raw_writel(tcmp, timer_base + MX3_TCMP); + __raw_writel(tcmp, timer_base + V2_TCMP); - return (int)(tcmp - __raw_readl(timer_base + MX3_TCN)) < 0 ? + return (int)(tcmp - __raw_readl(timer_base + V2_TCN)) < 0 ? -ETIME : 0; } @@ -192,8 +192,8 @@ static void mxc_set_mode(enum clock_event_mode mode, if (mode != clockevent_mode) { /* Set event time into far-far future */ if (timer_is_v2()) - __raw_writel(__raw_readl(timer_base + MX3_TCN) - 3, - timer_base + MX3_TCMP); + __raw_writel(__raw_readl(timer_base + V2_TCN) - 3, + timer_base + V2_TCMP); else __raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3, timer_base + MX1_2_TCMP); @@ -245,7 +245,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) uint32_t tstat; if (timer_is_v2()) - tstat = __raw_readl(timer_base + MX3_TSTAT); + tstat = __raw_readl(timer_base + V2_TSTAT); else tstat = __raw_readl(timer_base + MX1_2_TSTAT); @@ -276,7 +276,7 @@ static int __init mxc_clockevent_init(struct clk *timer_clk) unsigned int c = clk_get_rate(timer_clk); if (timer_is_v2()) - clockevent_mxc.set_next_event = mx3_set_next_event; + clockevent_mxc.set_next_event = v2_set_next_event; clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC, clockevent_mxc.shift); @@ -308,7 +308,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq) __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */ if (timer_is_v2()) - tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN; + tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN; else tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN; diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index afa6709db0b3..9b86d2a60d43 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -1,5 +1,5 @@ /* - * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C)2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License @@ -19,6 +19,7 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> +#include <mach/common.h> /* ***************************************** @@ -144,6 +145,7 @@ void __init tzic_init_irq(void __iomem *irqbase) set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID); } + mxc_register_gpios(); pr_info("TrustZone Interrupt Controller (TZIC) initialized\n"); } diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h new file mode 100644 index 000000000000..4d12ea4ca361 --- /dev/null +++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h @@ -0,0 +1,239 @@ +/* + * arch/arm/plat-nomadik/include/plat/ste_dma40.h + * + * Copyright (C) ST-Ericsson 2007-2010 + * License terms: GNU General Public License (GPL) version 2 + * Author: Per Friden <per.friden@stericsson.com> + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> + */ + + +#ifndef STE_DMA40_H +#define STE_DMA40_H + +#include <linux/dmaengine.h> +#include <linux/workqueue.h> +#include <linux/interrupt.h> +#include <linux/dmaengine.h> + +/* dev types for memcpy */ +#define STEDMA40_DEV_DST_MEMORY (-1) +#define STEDMA40_DEV_SRC_MEMORY (-1) + +/* + * Description of bitfields of channel_type variable is available in + * the info structure. + */ + +/* Priority */ +#define STEDMA40_INFO_PRIO_TYPE_POS 2 +#define STEDMA40_HIGH_PRIORITY_CHANNEL (0x1 << STEDMA40_INFO_PRIO_TYPE_POS) +#define STEDMA40_LOW_PRIORITY_CHANNEL (0x2 << STEDMA40_INFO_PRIO_TYPE_POS) + +/* Mode */ +#define STEDMA40_INFO_CH_MODE_TYPE_POS 6 +#define STEDMA40_CHANNEL_IN_PHY_MODE (0x1 << STEDMA40_INFO_CH_MODE_TYPE_POS) +#define STEDMA40_CHANNEL_IN_LOG_MODE (0x2 << STEDMA40_INFO_CH_MODE_TYPE_POS) +#define STEDMA40_CHANNEL_IN_OPER_MODE (0x3 << STEDMA40_INFO_CH_MODE_TYPE_POS) + +/* Mode options */ +#define STEDMA40_INFO_CH_MODE_OPT_POS 8 +#define STEDMA40_PCHAN_BASIC_MODE (0x1 << STEDMA40_INFO_CH_MODE_OPT_POS) +#define STEDMA40_PCHAN_MODULO_MODE (0x2 << STEDMA40_INFO_CH_MODE_OPT_POS) +#define STEDMA40_PCHAN_DOUBLE_DST_MODE (0x3 << STEDMA40_INFO_CH_MODE_OPT_POS) +#define STEDMA40_LCHAN_SRC_PHY_DST_LOG (0x1 << STEDMA40_INFO_CH_MODE_OPT_POS) +#define STEDMA40_LCHAN_SRC_LOG_DST_PHS (0x2 << STEDMA40_INFO_CH_MODE_OPT_POS) +#define STEDMA40_LCHAN_SRC_LOG_DST_LOG (0x3 << STEDMA40_INFO_CH_MODE_OPT_POS) + +/* Interrupt */ +#define STEDMA40_INFO_TIM_POS 10 +#define STEDMA40_NO_TIM_FOR_LINK (0x0 << STEDMA40_INFO_TIM_POS) +#define STEDMA40_TIM_FOR_LINK (0x1 << STEDMA40_INFO_TIM_POS) + +/* End of channel_type configuration */ + +#define STEDMA40_ESIZE_8_BIT 0x0 +#define STEDMA40_ESIZE_16_BIT 0x1 +#define STEDMA40_ESIZE_32_BIT 0x2 +#define STEDMA40_ESIZE_64_BIT 0x3 + +/* The value 4 indicates that PEN-reg shall be set to 0 */ +#define STEDMA40_PSIZE_PHY_1 0x4 +#define STEDMA40_PSIZE_PHY_2 0x0 +#define STEDMA40_PSIZE_PHY_4 0x1 +#define STEDMA40_PSIZE_PHY_8 0x2 +#define STEDMA40_PSIZE_PHY_16 0x3 + +/* + * The number of elements differ in logical and + * physical mode + */ +#define STEDMA40_PSIZE_LOG_1 STEDMA40_PSIZE_PHY_2 +#define STEDMA40_PSIZE_LOG_4 STEDMA40_PSIZE_PHY_4 +#define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8 +#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16 + +enum stedma40_flow_ctrl { + STEDMA40_NO_FLOW_CTRL, + STEDMA40_FLOW_CTRL, +}; + +enum stedma40_endianess { + STEDMA40_LITTLE_ENDIAN, + STEDMA40_BIG_ENDIAN +}; + +enum stedma40_periph_data_width { + STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT, + STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT, + STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT, + STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT +}; + +struct stedma40_half_channel_info { + enum stedma40_endianess endianess; + enum stedma40_periph_data_width data_width; + int psize; + enum stedma40_flow_ctrl flow_ctrl; +}; + +enum stedma40_xfer_dir { + STEDMA40_MEM_TO_MEM, + STEDMA40_MEM_TO_PERIPH, + STEDMA40_PERIPH_TO_MEM, + STEDMA40_PERIPH_TO_PERIPH +}; + + +/** + * struct stedma40_chan_cfg - Structure to be filled by client drivers. + * + * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH + * @channel_type: priority, mode, mode options and interrupt configuration. + * @src_dev_type: Src device type + * @dst_dev_type: Dst device type + * @src_info: Parameters for dst half channel + * @dst_info: Parameters for dst half channel + * @pre_transfer_data: Data to be passed on to the pre_transfer() function. + * @pre_transfer: Callback used if needed before preparation of transfer. + * Only called if device is set. size of bytes to transfer + * (in case of multiple element transfer size is size of the first element). + * + * + * This structure has to be filled by the client drivers. + * It is recommended to do all dma configurations for clients in the machine. + * + */ +struct stedma40_chan_cfg { + enum stedma40_xfer_dir dir; + unsigned int channel_type; + int src_dev_type; + int dst_dev_type; + struct stedma40_half_channel_info src_info; + struct stedma40_half_channel_info dst_info; + void *pre_transfer_data; + int (*pre_transfer) (struct dma_chan *chan, + void *data, + int size); +}; + +/** + * struct stedma40_platform_data - Configuration struct for the dma device. + * + * @dev_len: length of dev_tx and dev_rx + * @dev_tx: mapping between destination event line and io address + * @dev_rx: mapping between source event line and io address + * @memcpy: list of memcpy event lines + * @memcpy_len: length of memcpy + * @memcpy_conf_phy: default configuration of physical channel memcpy + * @memcpy_conf_log: default configuration of logical channel memcpy + * @llis_per_log: number of max linked list items per logical channel + * + */ +struct stedma40_platform_data { + u32 dev_len; + const dma_addr_t *dev_tx; + const dma_addr_t *dev_rx; + int *memcpy; + u32 memcpy_len; + struct stedma40_chan_cfg *memcpy_conf_phy; + struct stedma40_chan_cfg *memcpy_conf_log; + unsigned int llis_per_log; +}; + +/** + * setdma40_set_psize() - Used for changing the package size of an + * already configured dma channel. + * + * @chan: dmaengine handle + * @src_psize: new package side for src. (STEDMA40_PSIZE*) + * @src_psize: new package side for dst. (STEDMA40_PSIZE*) + * + * returns 0 on ok, otherwise negative error number. + */ +int stedma40_set_psize(struct dma_chan *chan, + int src_psize, + int dst_psize); + +/** + * stedma40_filter() - Provides stedma40_chan_cfg to the + * ste_dma40 dma driver via the dmaengine framework. + * does some checking of what's provided. + * + * Never directly called by client. It used by dmaengine. + * @chan: dmaengine handle. + * @data: Must be of type: struct stedma40_chan_cfg and is + * the configuration of the framework. + * + * + */ + +bool stedma40_filter(struct dma_chan *chan, void *data); + +/** + * stedma40_memcpy_sg() - extension of the dma framework, memcpy to/from + * scattergatter lists. + * + * @chan: dmaengine handle + * @sgl_dst: Destination scatter list + * @sgl_src: Source scatter list + * @sgl_len: The length of each scatterlist. Both lists must be of equal length + * and each element must match the corresponding element in the other scatter + * list. + * @flags: is actually enum dma_ctrl_flags. See dmaengine.h + */ + +struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan, + struct scatterlist *sgl_dst, + struct scatterlist *sgl_src, + unsigned int sgl_len, + unsigned long flags); + +/** + * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave + * (=device) + * + * @chan: dmaengine handle + * @addr: source or destination physicall address. + * @size: bytes to transfer + * @direction: direction of transfer + * @flags: is actually enum dma_ctrl_flags. See dmaengine.h + */ + +static inline struct +dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, + dma_addr_t addr, + unsigned int size, + enum dma_data_direction direction, + unsigned long flags) +{ + struct scatterlist sg; + sg_init_table(&sg, 1); + sg.dma_address = addr; + sg.length = size; + + return chan->device->device_prep_slave_sg(chan, &sg, 1, + direction, flags); +} + +#endif diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 6da796ef82bd..78b49a626d06 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -110,8 +110,13 @@ config OMAP_IOMMU tristate config OMAP_IOMMU_DEBUG - depends on OMAP_IOMMU - tristate + tristate "Export OMAP IOMMU internals in DebugFS" + depends on OMAP_IOMMU && DEBUG_FS + help + Select this to see extensive information about + the internal state of OMAP IOMMU in debugfs. + + Say N unless you know you need this. choice prompt "System timer" diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 5261a0923691..7190cbd92620 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -12,14 +12,12 @@ */ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/module.h> #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> #include <linux/string.h> #include <linux/clk.h> #include <linux/mutex.h> -#include <linux/platform_device.h> #include <linux/cpufreq.h> #include <linux/debugfs.h> #include <linux/io.h> @@ -32,9 +30,9 @@ static DEFINE_SPINLOCK(clockfw_lock); static struct clk_functions *arch_clock; -/*------------------------------------------------------------------------- +/* * Standard clock functions defined in include/linux/clk.h - *-------------------------------------------------------------------------*/ + */ int clk_enable(struct clk *clk) { @@ -92,9 +90,9 @@ unsigned long clk_get_rate(struct clk *clk) } EXPORT_SYMBOL(clk_get_rate); -/*------------------------------------------------------------------------- +/* * Optional clock functions defined in include/linux/clk.h - *-------------------------------------------------------------------------*/ + */ long clk_round_rate(struct clk *clk, unsigned long rate) { @@ -140,9 +138,6 @@ int clk_set_parent(struct clk *clk, struct clk *parent) unsigned long flags; int ret = -EINVAL; - if (cpu_is_omap44xx()) - /* OMAP4 clk framework not supported yet */ - return 0; if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent)) return ret; @@ -169,9 +164,9 @@ struct clk *clk_get_parent(struct clk *clk) } EXPORT_SYMBOL(clk_get_parent); -/*------------------------------------------------------------------------- +/* * OMAP specific clock functions shared between omap1 and omap2 - *-------------------------------------------------------------------------*/ + */ int __initdata mpurate; @@ -222,7 +217,7 @@ void clk_reparent(struct clk *child, struct clk *parent) } /* Propagate rate to children */ -void propagate_rate(struct clk * tclk) +void propagate_rate(struct clk *tclk) { struct clk *clkp; @@ -389,7 +384,9 @@ void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) } #endif -/*-------------------------------------------------------------------------*/ +/* + * + */ #ifdef CONFIG_OMAP_RESET_CLOCKS /* @@ -404,7 +401,7 @@ static int __init clk_disable_unused(void) if (ck->ops == &clkops_null) continue; - if (ck->usecount > 0 || ck->enable_reg == 0) + if (ck->usecount > 0 || !ck->enable_reg) continue; spin_lock_irqsave(&clockfw_lock, flags); diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index f12f0e39ddf2..219c01e82bc5 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -47,9 +47,6 @@ struct omap_board_config_kernel *omap_board_config; int omap_board_config_size; -/* used by omap-smp.c and board-4430sdp.c */ -void __iomem *gic_cpu_base_addr; - static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out) { struct omap_board_config_kernel *kinfo = NULL; diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 1d959965ff52..f7f571e7987e 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -501,7 +501,8 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) burst = 0x2; break; } - /* not supported by current hardware on OMAP1 + /* + * not supported by current hardware on OMAP1 * w |= (0x03 << 7); * fall through */ @@ -510,7 +511,8 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) burst = 0x3; break; } - /* OMAP1 don't support burst 16 + /* + * OMAP1 don't support burst 16 * fall through */ default: @@ -604,7 +606,8 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) burst = 0x3; break; } - /* OMAP1 don't support burst 16 + /* + * OMAP1 don't support burst 16 * fall through */ default: @@ -709,6 +712,21 @@ static inline void omap2_enable_irq_lch(int lch) spin_unlock_irqrestore(&dma_chan_lock, flags); } +static inline void omap2_disable_irq_lch(int lch) +{ + u32 val; + unsigned long flags; + + if (!cpu_class_is_omap2()) + return; + + spin_lock_irqsave(&dma_chan_lock, flags); + val = dma_read(IRQENABLE_L0); + val &= ~(1 << lch); + dma_write(val, IRQENABLE_L0); + spin_unlock_irqrestore(&dma_chan_lock, flags); +} + int omap_request_dma(int dev_id, const char *dev_name, void (*callback)(int lch, u16 ch_status, void *data), void *data, int *dma_ch_out) @@ -807,14 +825,7 @@ void omap_free_dma(int lch) } if (cpu_class_is_omap2()) { - u32 val; - - spin_lock_irqsave(&dma_chan_lock, flags); - /* Disable interrupts */ - val = dma_read(IRQENABLE_L0); - val &= ~(1 << lch); - dma_write(val, IRQENABLE_L0); - spin_unlock_irqrestore(&dma_chan_lock, flags); + omap2_disable_irq_lch(lch); /* Clear the CSR register and IRQ status register */ dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch)); @@ -1277,8 +1288,10 @@ int omap_request_dma_chain(int dev_id, const char *dev_name, return -EINVAL; } - /* Allocate a queue to maintain the status of the channels - * in the chain */ + /* + * Allocate a queue to maintain the status of the channels + * in the chain + */ channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL); if (channels == NULL) { printk(KERN_ERR "omap_dma: No memory for channel queue\n"); @@ -1907,7 +1920,8 @@ static int omap2_dma_handle_ch(int ch) printk(KERN_INFO "DMA transaction error with device %d\n", dma_chan[ch].dev_id); if (cpu_class_is_omap2()) { - /* Errata: sDMA Channel is not disabled + /* + * Errata: sDMA Channel is not disabled * after a transaction error. So we explicitely * disable the channel */ @@ -2107,6 +2121,9 @@ static int __init omap_init_dma(void) for (ch = 0; ch < dma_chan_count; ch++) { omap_clear_dma(ch); + if (cpu_class_is_omap2()) + omap2_disable_irq_lch(ch); + dma_chan[ch].dev_id = -1; dma_chan[ch].next_lch = -1; diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 4d99dfbc8bef..c64875f11fac 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -264,8 +264,8 @@ static struct omap_dm_timer omap4_dm_timers[] = { { .phys_base = 0x4a320000, .irq = OMAP44XX_IRQ_GPT12 }, }; static const char *omap4_dm_source_names[] __initdata = { - "sys_ck", - "omap_32k_fck", + "sys_clkin_ck", + "sys_32k_ck", NULL }; static struct clk *omap4_dm_source_clocks[2]; diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 45a225d09125..dc2ac42d6319 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -27,6 +27,7 @@ #include <mach/irqs.h> #include <mach/gpio.h> #include <asm/mach/irq.h> +#include <plat/powerdomain.h> /* * OMAP1510 GPIO registers @@ -137,7 +138,11 @@ #define OMAP4_GPIO_IRQSTATUSCLR1 0x0040 #define OMAP4_GPIO_IRQWAKEN0 0x0044 #define OMAP4_GPIO_IRQWAKEN1 0x0048 -#define OMAP4_GPIO_SYSSTATUS 0x0104 +#define OMAP4_GPIO_SYSSTATUS 0x0114 +#define OMAP4_GPIO_IRQENABLE1 0x011c +#define OMAP4_GPIO_WAKE_EN 0x0120 +#define OMAP4_GPIO_IRQSTATUS2 0x0128 +#define OMAP4_GPIO_IRQENABLE2 0x012c #define OMAP4_GPIO_CTRL 0x0130 #define OMAP4_GPIO_OE 0x0134 #define OMAP4_GPIO_DATAIN 0x0138 @@ -148,6 +153,10 @@ #define OMAP4_GPIO_FALLINGDETECT 0x014c #define OMAP4_GPIO_DEBOUNCENABLE 0x0150 #define OMAP4_GPIO_DEBOUNCINGTIME 0x0154 +#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160 +#define OMAP4_GPIO_SETIRQENABLE1 0x0164 +#define OMAP4_GPIO_CLEARWKUENA 0x0180 +#define OMAP4_GPIO_SETWKUENA 0x0184 #define OMAP4_GPIO_CLEARDATAOUT 0x0190 #define OMAP4_GPIO_SETDATAOUT 0x0194 /* @@ -195,6 +204,7 @@ struct gpio_bank { struct gpio_chip chip; struct clk *dbck; u32 mod_usage; + u32 dbck_enable_mask; }; #define METHOD_MPUIO 0 @@ -303,8 +313,6 @@ struct omap3_gpio_regs { u32 risingdetect; u32 fallingdetect; u32 dataout; - u32 setwkuena; - u32 setdataout; }; static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS]; @@ -591,12 +599,16 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) reg += OMAP7XX_GPIO_DATA_OUTPUT; break; #endif -#ifdef CONFIG_ARCH_OMAP2PLUS +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) case METHOD_GPIO_24XX: - case METHOD_GPIO_44XX: reg += OMAP24XX_GPIO_DATAOUT; break; #endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_44XX: + reg += OMAP4_GPIO_DATAOUT; + break; +#endif default: return -EINVAL; } @@ -646,6 +658,7 @@ void omap_set_gpio_debounce(int gpio, int enable) goto done; if (cpu_is_omap34xx() || cpu_is_omap44xx()) { + bank->dbck_enable_mask = val; if (enable) clk_enable(bank->dbck); else @@ -724,15 +737,27 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, OMAP4_GPIO_IRQWAKEN0); } } else { - if (trigger != 0) + /* + * GPIO wakeup request can only be generated on edge + * transitions + */ + if (trigger & IRQ_TYPE_EDGE_BOTH) __raw_writel(1 << gpio, bank->base + OMAP24XX_GPIO_SETWKUENA); else __raw_writel(1 << gpio, bank->base + OMAP24XX_GPIO_CLEARWKUENA); } - } else { - if (trigger != 0) + } + /* This part needs to be executed always for OMAP34xx */ + if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) { + /* + * Log the edge gpio and manually trigger the IRQ + * after resume if the input level changes + * to avoid irq lost during PER RET/OFF mode + * Applies for omap2 non-wakeup gpio and all omap3 gpios + */ + if (trigger & IRQ_TYPE_EDGE_BOTH) bank->enabled_non_wakeup_gpios |= gpio_bit; else bank->enabled_non_wakeup_gpios &= ~gpio_bit; @@ -1200,11 +1225,17 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) #endif if (!cpu_class_is_omap1()) { if (!bank->mod_usage) { + void __iomem *reg = bank->base; u32 ctrl; - ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL); - ctrl &= 0xFFFFFFFE; + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) + reg += OMAP24XX_GPIO_CTRL; + else if (cpu_is_omap44xx()) + reg += OMAP4_GPIO_CTRL; + ctrl = __raw_readl(reg); /* Module is enabled, clocks are not gated */ - __raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL); + ctrl &= 0xFFFFFFFE; + __raw_writel(ctrl, reg); } bank->mod_usage |= 1 << offset; } @@ -1226,22 +1257,34 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) __raw_writel(1 << offset, reg); } #endif -#ifdef CONFIG_ARCH_OMAP2PLUS - if ((bank->method == METHOD_GPIO_24XX) || - (bank->method == METHOD_GPIO_44XX)) { +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + if (bank->method == METHOD_GPIO_24XX) { /* Disable wake-up during idle for dynamic tick */ void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA; __raw_writel(1 << offset, reg); } #endif +#ifdef CONFIG_ARCH_OMAP4 + if (bank->method == METHOD_GPIO_44XX) { + /* Disable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0; + __raw_writel(1 << offset, reg); + } +#endif if (!cpu_class_is_omap1()) { bank->mod_usage &= ~(1 << offset); if (!bank->mod_usage) { + void __iomem *reg = bank->base; u32 ctrl; - ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL); + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) + reg += OMAP24XX_GPIO_CTRL; + else if (cpu_is_omap44xx()) + reg += OMAP4_GPIO_CTRL; + ctrl = __raw_readl(reg); /* Module is disabled, clocks are gated */ ctrl |= 1; - __raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL); + __raw_writel(ctrl, reg); } } _reset_gpio(bank, bank->chip.base + offset); @@ -1570,9 +1613,14 @@ static int gpio_is_input(struct gpio_bank *bank, int mask) reg += OMAP7XX_GPIO_DIR_CONTROL; break; case METHOD_GPIO_24XX: - case METHOD_GPIO_44XX: reg += OMAP24XX_GPIO_OE; break; + case METHOD_GPIO_44XX: + reg += OMAP4_GPIO_OE; + break; + default: + WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method"); + return -EINVAL; } return __raw_readl(reg) & mask; } @@ -1845,7 +1893,8 @@ static int __init _omap_gpio_init(void) __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL); } - if (i < ARRAY_SIZE(non_wakeup_gpios)) + if (cpu_is_omap24xx() && + i < ARRAY_SIZE(non_wakeup_gpios)) bank->non_wakeup_gpios = non_wakeup_gpios[i]; gpio_count = 32; } @@ -2028,16 +2077,27 @@ static struct sys_device omap_gpio_device = { static int workaround_enabled; -void omap2_gpio_prepare_for_retention(void) +void omap2_gpio_prepare_for_idle(int power_state) { int i, c = 0; + int min = 0; - /* Remove triggering for all non-wakeup GPIOs. Otherwise spurious - * IRQs will be generated. See OMAP2420 Errata item 1.101. */ - for (i = 0; i < gpio_bank_count; i++) { + if (cpu_is_omap34xx()) + min = 1; + + for (i = min; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; u32 l1, l2; + if (bank->dbck_enable_mask) + clk_disable(bank->dbck); + + if (power_state > PWRDM_POWER_OFF) + continue; + + /* If going to OFF, remove triggering for all + * non-wakeup GPIOs. Otherwise spurious IRQs will be + * generated. See OMAP2420 Errata item 1.101. */ if (!(bank->enabled_non_wakeup_gpios)) continue; @@ -2085,16 +2145,23 @@ void omap2_gpio_prepare_for_retention(void) workaround_enabled = 1; } -void omap2_gpio_resume_after_retention(void) +void omap2_gpio_resume_after_idle(void) { int i; + int min = 0; - if (!workaround_enabled) - return; - for (i = 0; i < gpio_bank_count; i++) { + if (cpu_is_omap34xx()) + min = 1; + for (i = min; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; u32 l, gen, gen0, gen1; + if (bank->dbck_enable_mask) + clk_enable(bank->dbck); + + if (!workaround_enabled) + continue; + if (!(bank->enabled_non_wakeup_gpios)) continue; @@ -2119,7 +2186,7 @@ void omap2_gpio_resume_after_retention(void) * horribly racy, but it's the best we can do to work around * this silicon bug. */ l ^= bank->saved_datain; - l &= bank->non_wakeup_gpios; + l &= bank->enabled_non_wakeup_gpios; /* * No need to generate IRQs for the rising edge for gpio IRQs @@ -2207,10 +2274,6 @@ void omap_gpio_save_context(void) __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); gpio_context[i].dataout = __raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT); - gpio_context[i].setwkuena = - __raw_readl(bank->base + OMAP24XX_GPIO_SETWKUENA); - gpio_context[i].setdataout = - __raw_readl(bank->base + OMAP24XX_GPIO_SETDATAOUT); } } @@ -2243,10 +2306,6 @@ void omap_gpio_restore_context(void) bank->base + OMAP24XX_GPIO_FALLINGDETECT); __raw_writel(gpio_context[i].dataout, bank->base + OMAP24XX_GPIO_DATAOUT); - __raw_writel(gpio_context[i].setwkuena, - bank->base + OMAP24XX_GPIO_SETWKUENA); - __raw_writel(gpio_context[i].setdataout, - bank->base + OMAP24XX_GPIO_SETDATAOUT); } } #endif @@ -2286,110 +2345,3 @@ static int __init omap_gpio_sysinit(void) } arch_initcall(omap_gpio_sysinit); - - -#ifdef CONFIG_DEBUG_FS - -#include <linux/debugfs.h> -#include <linux/seq_file.h> - -static int dbg_gpio_show(struct seq_file *s, void *unused) -{ - unsigned i, j, gpio; - - for (i = 0, gpio = 0; i < gpio_bank_count; i++) { - struct gpio_bank *bank = gpio_bank + i; - unsigned bankwidth = 16; - u32 mask = 1; - - if (bank_is_mpuio(bank)) - gpio = OMAP_MPUIO(0); - else if (cpu_class_is_omap2() || cpu_is_omap7xx()) - bankwidth = 32; - - for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) { - unsigned irq, value, is_in, irqstat; - const char *label; - - label = gpiochip_is_requested(&bank->chip, j); - if (!label) - continue; - - irq = bank->virtual_irq_start + j; - value = gpio_get_value(gpio); - is_in = gpio_is_input(bank, mask); - - if (bank_is_mpuio(bank)) - seq_printf(s, "MPUIO %2d ", j); - else - seq_printf(s, "GPIO %3d ", gpio); - seq_printf(s, "(%-20.20s): %s %s", - label, - is_in ? "in " : "out", - value ? "hi" : "lo"); - -/* FIXME for at least omap2, show pullup/pulldown state */ - - irqstat = irq_desc[irq].status; -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) - if (is_in && ((bank->suspend_wakeup & mask) - || irqstat & IRQ_TYPE_SENSE_MASK)) { - char *trigger = NULL; - - switch (irqstat & IRQ_TYPE_SENSE_MASK) { - case IRQ_TYPE_EDGE_FALLING: - trigger = "falling"; - break; - case IRQ_TYPE_EDGE_RISING: - trigger = "rising"; - break; - case IRQ_TYPE_EDGE_BOTH: - trigger = "bothedge"; - break; - case IRQ_TYPE_LEVEL_LOW: - trigger = "low"; - break; - case IRQ_TYPE_LEVEL_HIGH: - trigger = "high"; - break; - case IRQ_TYPE_NONE: - trigger = "(?)"; - break; - } - seq_printf(s, ", irq-%d %-8s%s", - irq, trigger, - (bank->suspend_wakeup & mask) - ? " wakeup" : ""); - } -#endif - seq_printf(s, "\n"); - } - - if (bank_is_mpuio(bank)) { - seq_printf(s, "\n"); - gpio = 0; - } - } - return 0; -} - -static int dbg_gpio_open(struct inode *inode, struct file *file) -{ - return single_open(file, dbg_gpio_show, &inode->i_private); -} - -static const struct file_operations debug_fops = { - .open = dbg_gpio_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init omap_gpio_debuginit(void) -{ - (void) debugfs_create_file("omap_gpio", S_IRUGO, - NULL, NULL, &debug_fops); - return 0; -} -late_initcall(omap_gpio_debuginit); -#endif diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index f044b5927508..eec2b4993c69 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -38,6 +38,7 @@ #define OMAP2_I2C_BASE1 0x48070000 #define OMAP2_I2C_BASE2 0x48072000 #define OMAP2_I2C_BASE3 0x48060000 +#define OMAP4_I2C_BASE4 0x48350000 static const char name[] = "i2c_omap"; @@ -54,11 +55,14 @@ static const char name[] = "i2c_omap"; static struct resource i2c_resources[][2] = { { I2C_RESOURCE_BUILDER(0, 0) }, -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, INT_24XX_I2C2_IRQ) }, +#if defined(CONFIG_ARCH_OMAP2PLUS) + { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, 0) }, #endif -#if defined(CONFIG_ARCH_OMAP3) - { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, INT_34XX_I2C3_IRQ) }, +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) + { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, 0) }, +#endif +#if defined(CONFIG_ARCH_OMAP4) + { I2C_RESOURCE_BUILDER(OMAP4_I2C_BASE4, 0) }, #endif }; @@ -76,12 +80,15 @@ static struct resource i2c_resources[][2] = { static struct omap_i2c_bus_platform_data i2c_pdata[ARRAY_SIZE(i2c_resources)]; static struct platform_device omap_i2c_devices[] = { I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]), -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2PLUS) I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_pdata[1]), #endif -#if defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_pdata[2]), #endif +#if defined(CONFIG_ARCH_OMAP4) + I2C_DEV_BUILDER(4, i2c_resources[3], &i2c_pdata[3]), +#endif }; #define OMAP_I2C_CMDLINE_SETUP (BIT(31)) @@ -96,37 +103,60 @@ static int __init omap_i2c_nr_ports(void) ports = 2; else if (cpu_is_omap34xx()) ports = 3; + else if (cpu_is_omap44xx()) + ports = 4; return ports; } -static int __init omap_i2c_add_bus(int bus_id) +/* Shared between omap2 and 3 */ +static resource_size_t omap2_i2c_irq[3] __initdata = { + INT_24XX_I2C1_IRQ, + INT_24XX_I2C2_IRQ, + INT_34XX_I2C3_IRQ, +}; + +static resource_size_t omap4_i2c_irq[4] __initdata = { + OMAP44XX_IRQ_I2C1, + OMAP44XX_IRQ_I2C2, + OMAP44XX_IRQ_I2C3, + OMAP44XX_IRQ_I2C4, +}; + +static inline int omap1_i2c_add_bus(struct platform_device *pdev, int bus_id) { - struct platform_device *pdev; struct omap_i2c_bus_platform_data *pd; struct resource *res; - resource_size_t base, irq; - pdev = &omap_i2c_devices[bus_id - 1]; pd = pdev->dev.platform_data; + res = pdev->resource; + res[0].start = OMAP1_I2C_BASE; + res[0].end = res[0].start + OMAP_I2C_SIZE; + res[1].start = INT_I2C; + omap1_i2c_mux_pins(bus_id); + + return platform_device_register(pdev); +} + +static inline int omap2_i2c_add_bus(struct platform_device *pdev, int bus_id) +{ + struct resource *res; + resource_size_t *irq; + + res = pdev->resource; + + if (!cpu_is_omap44xx()) + irq = omap2_i2c_irq; + else + irq = omap4_i2c_irq; + if (bus_id == 1) { - res = pdev->resource; - if (cpu_class_is_omap1()) { - base = OMAP1_I2C_BASE; - irq = INT_I2C; - } else { - base = OMAP2_I2C_BASE1; - irq = INT_24XX_I2C1_IRQ; - } - res[0].start = base; - res[0].end = base + OMAP_I2C_SIZE; - res[1].start = irq; + res[0].start = OMAP2_I2C_BASE1; + res[0].end = res[0].start + OMAP_I2C_SIZE; } - if (cpu_class_is_omap1()) - omap1_i2c_mux_pins(bus_id); - if (cpu_class_is_omap2()) - omap2_i2c_mux_pins(bus_id); + res[1].start = irq[bus_id - 1]; + omap2_i2c_mux_pins(bus_id); /* * When waiting for completion of a i2c transfer, we need to @@ -134,12 +164,28 @@ static int __init omap_i2c_add_bus(int bus_id) * ensure quick enough wakeup from idle, when transfer * completes. */ - if (cpu_is_omap34xx()) + if (cpu_is_omap34xx()) { + struct omap_i2c_bus_platform_data *pd; + + pd = pdev->dev.platform_data; pd->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat; + } return platform_device_register(pdev); } +static int __init omap_i2c_add_bus(int bus_id) +{ + struct platform_device *pdev; + + pdev = &omap_i2c_devices[bus_id - 1]; + + if (cpu_class_is_omap1()) + return omap1_i2c_add_bus(pdev, bus_id); + else + return omap2_i2c_add_bus(pdev, bus_id); +} + /** * omap_i2c_bus_setup - Process command line options for the I2C bus speed * @str: String of options diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 34f7fa9ad4c0..dfc472ca0cc4 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -196,15 +196,15 @@ extern struct clk dummy_ck; #define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ /* Clksel_rate flags */ -#define DEFAULT_RATE (1 << 0) -#define RATE_IN_242X (1 << 1) -#define RATE_IN_243X (1 << 2) -#define RATE_IN_343X (1 << 3) /* rates common to all 343X */ -#define RATE_IN_3430ES2 (1 << 4) /* 3430ES2 rates only */ -#define RATE_IN_36XX (1 << 5) -#define RATE_IN_4430 (1 << 6) +#define RATE_IN_242X (1 << 0) +#define RATE_IN_243X (1 << 1) +#define RATE_IN_3XXX (1 << 2) /* rates common to all OMAP3 */ +#define RATE_IN_3430ES2 (1 << 3) /* 3430ES2 rates only */ +#define RATE_IN_36XX (1 << 4) +#define RATE_IN_4430 (1 << 5) #define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) +#define RATE_IN_3430ES2PLUS (RATE_IN_3430ES2 | RATE_IN_36XX) #endif diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 7556e271942e..d265018f5e6b 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -31,9 +31,6 @@ struct sys_timer; -/* used by omap-smp.c and board-4430sdp.c */ -extern void __iomem *gic_cpu_base_addr; - extern void omap_map_common_io(void); extern struct sys_timer omap_timer; diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h index a56deee97676..131bf405c2f6 100644 --- a/arch/arm/plat-omap/include/plat/control.h +++ b/arch/arm/plat-omap/include/plat/control.h @@ -207,6 +207,9 @@ /* 44xx control status register offset */ #define OMAP44XX_CONTROL_STATUS 0x2c4 +/* 44xx-only CONTROL_GENERAL register offsets */ +#define OMAP44XX_CONTROL_MMC1 0x628 +#define OMAP44XX_CONTROL_PBIAS_LITE 0x600 /* * REVISIT: This list of registers is not comprehensive - there are more * that should be added. @@ -252,6 +255,23 @@ #define OMAP2_PBIASLITEPWRDNZ0 (1 << 1) #define OMAP2_PBIASLITEVMODE0 (1 << 0) +/* CONTROL_PBIAS_LITE bits for OMAP4 */ +#define OMAP4_MMC1_PWRDNZ (1 << 26) +#define OMAP4_MMC1_PBIASLITE_HIZ_MODE (1 << 25) +#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT (1 << 24) +#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR (1 << 23) +#define OMAP4_MMC1_PBIASLITE_PWRDNZ (1 << 22) +#define OMAP4_MMC1_PBIASLITE_VMODE (1 << 21) +#define OMAP4_USBC1_ICUSB_PWRDNZ (1 << 20) + +#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP0 (1 << 31) +#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP1 (1 << 30) +#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP2 (1 << 29) +#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP3 (1 << 28) +#define OMAP4_CONTROL_SDMMC1_DR0_SPEEDCTRL (1 << 27) +#define OMAP4_CONTROL_SDMMC1_DR1_SPEEDCTRL (1 << 26) +#define OMAP4_CONTROL_SDMMC1_DR2_SPEEDCTRL (1 << 25) + /* CONTROL_PROG_IO1 bits */ #define OMAP3630_PRG_SDMMC1_SPEEDCTRL (1 << 20) diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index de7c54731cbe..de1c604962eb 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -72,8 +72,8 @@ IH_GPIO_BASE + (nr)) extern int omap_gpio_init(void); /* Call from board init only */ -extern void omap2_gpio_prepare_for_retention(void); -extern void omap2_gpio_resume_after_retention(void); +extern void omap2_gpio_prepare_for_idle(int power_state); +extern void omap2_gpio_resume_after_idle(void); extern void omap_set_gpio_debounce(int gpio, int enable); extern void omap_set_gpio_debounce_time(int gpio, int enable); extern void omap_gpio_save_context(void); diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 401701977dbb..c01d9f08a198 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -428,4 +428,8 @@ void omap3_intc_resume_idle(void); #include <mach/hardware.h> +#ifdef CONFIG_FIQ +#define FIQ_START 1024 +#endif + #endif diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index a1bac07c89eb..c835f1e994c6 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -102,6 +102,10 @@ struct omap_mmc_platform_data { /* Regulator off remapped to sleep */ unsigned vcc_aux_disable_is_sleep:1; + /* we can put the features above into this variable */ +#define HSMMC_HAS_PBIAS (1 << 0) + unsigned features; + int switch_pin; /* gpio (card detect) */ int gpio_wp; /* gpio (write protect) */ diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h index f235d32cd942..ffd909fa5287 100644 --- a/arch/arm/plat-omap/include/plat/multi.h +++ b/arch/arm/plat-omap/include/plat/multi.h @@ -61,9 +61,9 @@ # define OMAP_NAME omap16xx # endif #endif -#if (defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)) +#ifdef CONFIG_ARCH_OMAP2PLUS # if (defined(OMAP_NAME) || defined(MULTI_OMAP1)) -# error "OMAP1 and OMAP2 can't be selected at the same time" +# error "OMAP1 and OMAP2PLUS can't be selected at the same time" # endif #endif #ifdef CONFIG_ARCH_OMAP2420 @@ -82,12 +82,20 @@ # define OMAP_NAME omap2430 # endif #endif -#ifdef CONFIG_ARCH_OMAP3430 +#ifdef CONFIG_ARCH_OMAP3 # ifdef OMAP_NAME # undef MULTI_OMAP2 # define MULTI_OMAP2 # else -# define OMAP_NAME omap3430 +# define OMAP_NAME omap3 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP4 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap4 # endif #endif diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h index 2845fdc658b0..98fc8b4a4cc4 100644 --- a/arch/arm/plat-omap/include/plat/omap34xx.h +++ b/arch/arm/plat-omap/include/plat/omap34xx.h @@ -82,5 +82,10 @@ #define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000) +/* Security */ +#define OMAP34XX_SEC_BASE (L4_34XX_BASE + 0xA0000) +#define OMAP34XX_SEC_SHA1MD5_BASE (OMAP34XX_SEC_BASE + 0x23000) +#define OMAP34XX_SEC_AES_BASE (OMAP34XX_SEC_BASE + 0x25000) + #endif /* __ASM_ARCH_OMAP3_H */ diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h index b3ef1a7f53cc..8b3f12ff5cbc 100644 --- a/arch/arm/plat-omap/include/plat/omap44xx.h +++ b/arch/arm/plat-omap/include/plat/omap44xx.h @@ -30,6 +30,7 @@ #define OMAP4430_CM_BASE OMAP4430_CM1_BASE #define OMAP4430_CM2_BASE 0x4a008000 #define OMAP4430_PRM_BASE 0x4a306000 +#define OMAP4430_PRCM_MPU_BASE 0x48243000 #define OMAP44XX_GPMC_BASE 0x50000000 #define OMAP443X_SCM_BASE 0x4a002000 #define OMAP443X_CTRL_BASE 0x4a100000 @@ -48,5 +49,8 @@ #define OMAP44XX_MAILBOX_BASE (L4_44XX_BASE + 0xF4000) #define OMAP44XX_HSUSB_OTG_BASE (L4_44XX_BASE + 0xAB000) +#define OMAP4_MMU1_BASE 0x55082000 +#define OMAP4_MMU2_BASE 0x4A066000 + #endif /* __ASM_ARCH_OMAP44XX_H */ diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 36d6ea56ab51..0eccc09ac4a9 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -176,9 +176,8 @@ struct omap_hwmod_addr_space { #define OCP_USER_SDMA (1 << 1) /* omap_hwmod_ocp_if.flags bits */ -#define OCPIF_HAS_IDLEST (1 << 0) -#define OCPIF_SWSUP_IDLE (1 << 1) -#define OCPIF_CAN_BURST (1 << 2) +#define OCPIF_SWSUP_IDLE (1 << 0) +#define OCPIF_CAN_BURST (1 << 1) /** * struct omap_hwmod_ocp_if - OCP interface data @@ -327,14 +326,12 @@ struct omap_hwmod_omap2_prcm { /** * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data - * @module_offs: PRCM submodule offset from the start of the PRM/CM1/CM2 - * @device_offs: device register offset from @module_offs + * @clkctrl_reg: PRCM address of the clock control register * @submodule_wkdep_bit: bit shift of the WKDEP range */ struct omap_hwmod_omap4_prcm { - u32 module_offs; - u16 device_offs; - u8 submodule_wkdep_bit; + void __iomem *clkctrl_reg; + u8 submodule_wkdep_bit; }; @@ -353,6 +350,8 @@ struct omap_hwmod_omap4_prcm { * when module is enabled, rather than the default, which is to * enable autoidle * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup + * HWMOD_NO_IDLEST : this module does not have idle status - this is the case + * only for few initiator modules on OMAP2 & 3. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -360,6 +359,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_INIT_NO_IDLE (1 << 3) #define HWMOD_NO_OCP_AUTOIDLE (1 << 4) #define HWMOD_SET_DEFAULT_CLOCKACT (1 << 5) +#define HWMOD_NO_IDLEST (1 << 6) /* * omap_hwmod._int_flags definitions diff --git a/arch/arm/plat-omap/include/plat/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h index d82b2c00d4f1..fb6ec74fe39e 100644 --- a/arch/arm/plat-omap/include/plat/powerdomain.h +++ b/arch/arm/plat-omap/include/plat/powerdomain.h @@ -31,6 +31,7 @@ #define PWRDM_MAX_PWRSTS 4 /* Powerdomain allowable state bitfields */ +#define PWRSTS_ON (1 << PWRDM_POWER_ON) #define PWRSTS_OFF_ON ((1 << PWRDM_POWER_OFF) | \ (1 << PWRDM_POWER_ON)) @@ -49,6 +50,12 @@ * in MEM bank 1 position. This is * true for OMAP3430 */ +#define PWRDM_HAS_LOWPOWERSTATECHANGE (1 << 2) /* + * support to transition from a + * sleep state to a lower sleep + * state without waking up the + * powerdomain + */ /* * Number of memory banks that are power-controllable. On OMAP4430, the diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 83dce4c4f7e6..19145f5c32ba 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -15,6 +15,20 @@ #include <linux/init.h> +/* + * Memory entry used for the DEBUG_LL UART configuration. See also + * uncompress.h and debug-macro.S. + * + * Note that using a memory location for storing the UART configuration + * has at least two limitations: + * + * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the + * uncompress code could then partially overwrite itself + * 2. We assume printascii is called at least once before paging_init, + * and addruart has a chance to read OMAP_UART_INFO + */ +#define OMAP_UART_INFO (PHYS_OFFSET + 0x3ffc) + /* OMAP1 serial ports */ #define OMAP1_UART1_BASE 0xfffb0000 #define OMAP1_UART2_BASE 0xfffb0800 @@ -39,7 +53,7 @@ /* External port on Zoom2/3 */ #define ZOOM_UART_BASE 0x10000000 -#define ZOOM_UART_VIRT 0xfb000000 +#define ZOOM_UART_VIRT 0xfa400000 #define OMAP_PORT_SHIFT 2 #define OMAP7XX_PORT_SHIFT 0 diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 81d9ec540fcf..bbedd71943f6 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -20,27 +20,21 @@ #include <linux/types.h> #include <linux/serial_reg.h> +#include <asm/memory.h> #include <asm/mach-types.h> #include <plat/serial.h> -static volatile u8 *uart1_base; -static int uart1_shift; - static volatile u8 *uart_base; static int uart_shift; /* - * Store the DEBUG_LL uart number into UART1 scratchpad register. + * Store the DEBUG_LL uart number into memory. * See also debug-macro.S, and serial.c for related code. - * - * Please note that we currently assume that: - * - UART1 clocks are enabled for register access - * - UART1 scratchpad register can be used */ -static void set_uart1_scratchpad(unsigned char port) +static void set_omap_uart_info(unsigned char port) { - uart1_base[UART_SCR << uart1_shift] = port; + *(volatile u32 *)OMAP_UART_INFO = port; } static void putc(int c) @@ -60,42 +54,38 @@ static inline void flush(void) /* * Macros to configure UART1 and debug UART */ -#define _DEBUG_LL_ENTRY(mach, uart1_phys, uart1_shft, \ - dbg_uart, dbg_shft, dbg_id) \ +#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ if (machine_is_##mach()) { \ - uart1_base = (volatile u8 *)(uart1_phys); \ - uart1_shift = (uart1_shft); \ uart_base = (volatile u8 *)(dbg_uart); \ uart_shift = (dbg_shft); \ port = (dbg_id); \ - set_uart1_scratchpad(port); \ + set_omap_uart_info(port); \ break; \ } #define DEBUG_LL_OMAP7XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP7XX_PORT_SHIFT, \ - OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, OMAP1UART##p) + _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \ + OMAP1UART##p) #define DEBUG_LL_OMAP1(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP_PORT_SHIFT, \ - OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP1UART##p) + _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP1UART##p) #define DEBUG_LL_OMAP2(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT, \ - OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP2UART##p) + _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP2UART##p) #define DEBUG_LL_OMAP3(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP3_UART1_BASE, OMAP_PORT_SHIFT, \ - OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP3UART##p) + _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP3UART##p) #define DEBUG_LL_OMAP4(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP4_UART1_BASE, OMAP_PORT_SHIFT, \ - OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP4UART##p) + _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP4UART##p) /* Zoom2/3 shift is different for UART1 and external port */ #define DEBUG_LL_ZOOM(mach) \ - _DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT, \ - ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART) + _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART) static inline void __arch_decomp_setup(unsigned long arch_id) { diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 0e137663349c..bc094dbacee6 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -25,6 +25,11 @@ #include "iopgtable.h" +#define for_each_iotlb_cr(obj, n, __i, cr) \ + for (__i = 0; \ + (__i < (n)) && (cr = __iotlb_read_cr((obj), __i), true); \ + __i++) + /* accommodate the difference between omap1 and omap2/3 */ static const struct iommu_functions *arch_iommu; @@ -172,15 +177,12 @@ static void iotlb_lock_get(struct iommu *obj, struct iotlb_lock *l) l->base = MMU_LOCK_BASE(val); l->vict = MMU_LOCK_VICT(val); - BUG_ON(l->base != 0); /* Currently no preservation is used */ } static void iotlb_lock_set(struct iommu *obj, struct iotlb_lock *l) { u32 val; - BUG_ON(l->base != 0); /* Currently no preservation is used */ - val = (l->base << MMU_LOCK_BASE_SHIFT); val |= (l->vict << MMU_LOCK_VICT_SHIFT); @@ -214,6 +216,20 @@ static inline ssize_t iotlb_dump_cr(struct iommu *obj, struct cr_regs *cr, return arch_iommu->dump_cr(obj, cr, buf); } +/* only used in iotlb iteration for-loop */ +static struct cr_regs __iotlb_read_cr(struct iommu *obj, int n) +{ + struct cr_regs cr; + struct iotlb_lock l; + + iotlb_lock_get(obj, &l); + l.vict = n; + iotlb_lock_set(obj, &l); + iotlb_read_cr(obj, &cr); + + return cr; +} + /** * load_iotlb_entry - Set an iommu tlb entry * @obj: target iommu @@ -221,7 +237,6 @@ static inline ssize_t iotlb_dump_cr(struct iommu *obj, struct cr_regs *cr, **/ int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e) { - int i; int err = 0; struct iotlb_lock l; struct cr_regs *cr; @@ -231,21 +246,30 @@ int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e) clk_enable(obj->clk); - for (i = 0; i < obj->nr_tlb_entries; i++) { + iotlb_lock_get(obj, &l); + if (l.base == obj->nr_tlb_entries) { + dev_warn(obj->dev, "%s: preserve entries full\n", __func__); + err = -EBUSY; + goto out; + } + if (!e->prsvd) { + int i; struct cr_regs tmp; + for_each_iotlb_cr(obj, obj->nr_tlb_entries, i, tmp) + if (!iotlb_cr_valid(&tmp)) + break; + + if (i == obj->nr_tlb_entries) { + dev_dbg(obj->dev, "%s: full: no entry\n", __func__); + err = -EBUSY; + goto out; + } + iotlb_lock_get(obj, &l); - l.vict = i; + } else { + l.vict = l.base; iotlb_lock_set(obj, &l); - iotlb_read_cr(obj, &tmp); - if (!iotlb_cr_valid(&tmp)) - break; - } - - if (i == obj->nr_tlb_entries) { - dev_dbg(obj->dev, "%s: full: no entry\n", __func__); - err = -EBUSY; - goto out; } cr = iotlb_alloc_cr(obj, e); @@ -257,9 +281,11 @@ int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e) iotlb_load_cr(obj, cr); kfree(cr); + if (e->prsvd) + l.base++; /* increment victim for next tlb load */ if (++l.vict == obj->nr_tlb_entries) - l.vict = 0; + l.vict = l.base; iotlb_lock_set(obj, &l); out: clk_disable(obj->clk); @@ -276,20 +302,15 @@ EXPORT_SYMBOL_GPL(load_iotlb_entry); **/ void flush_iotlb_page(struct iommu *obj, u32 da) { - struct iotlb_lock l; int i; + struct cr_regs cr; clk_enable(obj->clk); - for (i = 0; i < obj->nr_tlb_entries; i++) { - struct cr_regs cr; + for_each_iotlb_cr(obj, obj->nr_tlb_entries, i, cr) { u32 start; size_t bytes; - iotlb_lock_get(obj, &l); - l.vict = i; - iotlb_lock_set(obj, &l); - iotlb_read_cr(obj, &cr); if (!iotlb_cr_valid(&cr)) continue; @@ -299,7 +320,6 @@ void flush_iotlb_page(struct iommu *obj, u32 da) if ((start <= da) && (da < start + bytes)) { dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n", __func__, start, da, bytes); - iotlb_load_cr(obj, &cr); iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY); } } @@ -370,26 +390,19 @@ EXPORT_SYMBOL_GPL(iommu_dump_ctx); static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs, int num) { int i; - struct iotlb_lock saved, l; + struct iotlb_lock saved; + struct cr_regs tmp; struct cr_regs *p = crs; clk_enable(obj->clk); - iotlb_lock_get(obj, &saved); - memcpy(&l, &saved, sizeof(saved)); - for (i = 0; i < num; i++) { - struct cr_regs tmp; - - iotlb_lock_get(obj, &l); - l.vict = i; - iotlb_lock_set(obj, &l); - iotlb_read_cr(obj, &tmp); + for_each_iotlb_cr(obj, num, i, tmp) { if (!iotlb_cr_valid(&tmp)) continue; - *p++ = tmp; } + iotlb_lock_set(obj, &saved); clk_disable(obj->clk); @@ -503,6 +516,12 @@ static int iopgd_alloc_section(struct iommu *obj, u32 da, u32 pa, u32 prot) { u32 *iopgd = iopgd_offset(obj, da); + if ((da | pa) & ~IOSECTION_MASK) { + dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n", + __func__, da, pa, IOSECTION_SIZE); + return -EINVAL; + } + *iopgd = (pa & IOSECTION_MASK) | prot | IOPGD_SECTION; flush_iopgd_range(iopgd, iopgd); return 0; @@ -513,6 +532,12 @@ static int iopgd_alloc_super(struct iommu *obj, u32 da, u32 pa, u32 prot) u32 *iopgd = iopgd_offset(obj, da); int i; + if ((da | pa) & ~IOSUPER_MASK) { + dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n", + __func__, da, pa, IOSUPER_SIZE); + return -EINVAL; + } + for (i = 0; i < 16; i++) *(iopgd + i) = (pa & IOSUPER_MASK) | prot | IOPGD_SUPER; flush_iopgd_range(iopgd, iopgd + 15); @@ -542,6 +567,12 @@ static int iopte_alloc_large(struct iommu *obj, u32 da, u32 pa, u32 prot) u32 *iopte = iopte_alloc(obj, iopgd, da); int i; + if ((da | pa) & ~IOLARGE_MASK) { + dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n", + __func__, da, pa, IOLARGE_SIZE); + return -EINVAL; + } + if (IS_ERR(iopte)) return PTR_ERR(iopte); diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c index 65c6d1ff7237..e43983ba59c5 100644 --- a/arch/arm/plat-omap/iovmm.c +++ b/arch/arm/plat-omap/iovmm.c @@ -287,16 +287,19 @@ static struct iovm_struct *alloc_iovm_area(struct iommu *obj, u32 da, prev_end = 0; list_for_each_entry(tmp, &obj->mmap, list) { - if ((prev_end <= start) && (start + bytes < tmp->da_start)) + if (prev_end >= start) + break; + + if (start + bytes < tmp->da_start) goto found; if (flags & IOVMF_DA_ANON) - start = roundup(tmp->da_end, alignement); + start = roundup(tmp->da_end + 1, alignement); prev_end = tmp->da_end; } - if ((start >= prev_end) && (ULONG_MAX - start >= bytes)) + if ((start > prev_end) && (ULONG_MAX - start >= bytes)) goto found; dev_dbg(obj->dev, "%s: no space to fit %08x(%x) flags: %08x\n", diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 0f5197479513..f899603051ac 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -2,10 +2,10 @@ * omap_device implementation * * Copyright (C) 2009 Nokia Corporation - * Paul Walmsley + * Paul Walmsley, Kevin Hilman * * Developed in collaboration with (alphabetical order): Benoit - * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram + * Cousson, Thara Gopinath, Tony Lindgren, Rajendra Nayak, Vikram * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard * Woodruff * diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 51f4dfb82e2b..226b2e858d6c 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -437,6 +437,20 @@ static inline int omap34xx_sram_init(void) } #endif +#ifdef CONFIG_ARCH_OMAP4 +int __init omap44xx_sram_init(void) +{ + printk(KERN_ERR "FIXME: %s not implemented\n", __func__); + + return -ENODEV; +} +#else +static inline int omap44xx_sram_init(void) +{ + return 0; +} +#endif + int __init omap_sram_init(void) { omap_detect_sram(); @@ -451,7 +465,7 @@ int __init omap_sram_init(void) else if (cpu_is_omap34xx()) omap34xx_sram_init(); else if (cpu_is_omap44xx()) - omap34xx_sram_init(); /* FIXME: */ + omap44xx_sram_init(); return 0; } diff --git a/arch/arm/plat-orion/include/plat/orion_nand.h b/arch/arm/plat-orion/include/plat/orion_nand.h index d6a4cfa37785..9f3c180834d1 100644 --- a/arch/arm/plat-orion/include/plat/orion_nand.h +++ b/arch/arm/plat-orion/include/plat/orion_nand.h @@ -14,6 +14,7 @@ */ struct orion_nand_data { struct mtd_partition *parts; + int (*dev_ready)(struct mtd_info *mtd); u32 nr_parts; u8 ale; /* address line number connected to ALE */ u8 cle; /* address line number connected to CLE */ diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index 58583732b29a..452e18438b41 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -234,32 +234,6 @@ void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd) } } - -/* Watchdog */ - -static struct resource s3c_wdt_resource[] = { - [0] = { - .start = S3C24XX_PA_WATCHDOG, - .end = S3C24XX_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_WDT, - .end = IRQ_WDT, - .flags = IORESOURCE_IRQ, - } - -}; - -struct platform_device s3c_device_wdt = { - .name = "s3c2410-wdt", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_wdt_resource), - .resource = s3c_wdt_resource, -}; - -EXPORT_SYMBOL(s3c_device_wdt); - /* IIS */ static struct resource s3c_iis_resource[] = { diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 92bd75607b43..5cb2dd1da632 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -7,7 +7,7 @@ config PLAT_S5P bool - depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210) + depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210) default y select ARM_VIC select NO_IOPORT @@ -24,3 +24,8 @@ config PLAT_S5P select SAMSUNG_IRQ_UART help Base platform code for Samsung's S5P series SoC. + +config S5P_EXT_INT + bool + help + Use the external interrupts (other than GPIO interrupts.) diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index 0ec09a9c36bd..39c242bb9d58 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -16,3 +16,5 @@ obj-y += dev-uart.o obj-y += cpu.o obj-y += clock.o obj-y += irq.o +obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o + diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index f92e5de3a755..75cb8c37ca2c 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -19,12 +19,14 @@ #include <plat/cpu.h> #include <plat/s5p6440.h> #include <plat/s5p6442.h> +#include <plat/s5pc100.h> #include <plat/s5pv210.h> /* table of supported CPUs */ static const char name_s5p6440[] = "S5P6440"; static const char name_s5p6442[] = "S5P6442"; +static const char name_s5pc100[] = "S5PC100"; static const char name_s5pv210[] = "S5PV210/S5PC110"; static struct cpu_table cpu_ids[] __initdata = { @@ -45,6 +47,14 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s5p6442_init, .name = name_s5p6442, }, { + .idcode = 0x43100000, + .idmask = 0xfffff000, + .map_io = s5pc100_map_io, + .init_clocks = s5pc100_init_clocks, + .init_uarts = s5pc100_init_uarts, + .init = s5pc100_init, + .name = name_s5pc100, + }, { .idcode = 0x43110000, .idmask = 0xfffff000, .map_io = s5pv210_map_io, diff --git a/arch/arm/plat-s5p/include/plat/s5pc100.h b/arch/arm/plat-s5p/include/plat/s5pc100.h new file mode 100644 index 000000000000..5f6099dd7cad --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/s5pc100.h @@ -0,0 +1,33 @@ +/* arch/arm/plat-s5p/include/plat/s5pc100.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Header file for s5pc100 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Common init code for S5PC100 related SoCs */ + +extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s5pc100_register_clocks(void); +extern void s5pc100_setup_clocks(void); + +#ifdef CONFIG_CPU_S5PC100 + +extern int s5pc100_init(void); +extern void s5pc100_init_irq(void); +extern void s5pc100_map_io(void); +extern void s5pc100_init_clocks(int xtal); + +#define s5pc100_init_uarts s5pc100_common_init_uarts + +#else +#define s5pc100_init_clocks NULL +#define s5pc100_init_uarts NULL +#define s5pc100_map_io NULL +#define s5pc100_init NULL +#endif diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c new file mode 100644 index 000000000000..eaa70aa0127b --- /dev/null +++ b/arch/arm/plat-s5p/irq-eint.c @@ -0,0 +1,213 @@ +/* linux/arch/arm/plat-s5p/irq-eint.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P - IRQ EINT support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/sysdev.h> +#include <linux/gpio.h> + +#include <asm/hardware/vic.h> + +#include <plat/regs-irqtype.h> + +#include <mach/map.h> +#include <plat/cpu.h> +#include <plat/pm.h> + +#include <plat/gpio-cfg.h> +#include <mach/regs-gpio.h> + +static inline void s5p_irq_eint_mask(unsigned int irq) +{ + u32 mask; + + mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq))); + mask |= eint_irq_to_bit(irq); + __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq))); +} + +static void s5p_irq_eint_unmask(unsigned int irq) +{ + u32 mask; + + mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq))); + mask &= ~(eint_irq_to_bit(irq)); + __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq))); +} + +static inline void s5p_irq_eint_ack(unsigned int irq) +{ + __raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq))); +} + +static void s5p_irq_eint_maskack(unsigned int irq) +{ + /* compiler should in-line these */ + s5p_irq_eint_mask(irq); + s5p_irq_eint_ack(irq); +} + +static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type) +{ + int offs = eint_offset(irq); + int shift; + u32 ctrl, mask; + u32 newvalue = 0; + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + newvalue = S5P_EXTINT_RISEEDGE; + break; + + case IRQ_TYPE_EDGE_FALLING: + newvalue = S5P_EXTINT_RISEEDGE; + break; + + case IRQ_TYPE_EDGE_BOTH: + newvalue = S5P_EXTINT_BOTHEDGE; + break; + + case IRQ_TYPE_LEVEL_LOW: + newvalue = S5P_EXTINT_LOWLEV; + break; + + case IRQ_TYPE_LEVEL_HIGH: + newvalue = S5P_EXTINT_HILEV; + break; + + default: + printk(KERN_ERR "No such irq type %d", type); + return -EINVAL; + } + + shift = (offs & 0x7) * 4; + mask = 0x7 << shift; + + ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(irq))); + ctrl &= ~mask; + ctrl |= newvalue << shift; + __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(irq))); + + if ((0 <= offs) && (offs < 8)) + s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE); + + else if ((8 <= offs) && (offs < 16)) + s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE); + + else if ((16 <= offs) && (offs < 24)) + s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE); + + else if ((24 <= offs) && (offs < 32)) + s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE); + + else + printk(KERN_ERR "No such irq number %d", offs); + + return 0; +} + +static struct irq_chip s5p_irq_eint = { + .name = "s5p-eint", + .mask = s5p_irq_eint_mask, + .unmask = s5p_irq_eint_unmask, + .mask_ack = s5p_irq_eint_maskack, + .ack = s5p_irq_eint_ack, + .set_type = s5p_irq_eint_set_type, +#ifdef CONFIG_PM + .set_wake = s3c_irqext_wake, +#endif +}; + +/* s5p_irq_demux_eint + * + * This function demuxes the IRQ from the group0 external interrupts, + * from EINTs 16 to 31. It is designed to be inlined into the specific + * handler s5p_irq_demux_eintX_Y. + * + * Each EINT pend/mask registers handle eight of them. + */ +static inline void s5p_irq_demux_eint(unsigned int start) +{ + u32 status; + u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start))); + unsigned int irq; + + status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start))); + status &= ~mask; + status &= 0xff; + + while (status) { + irq = fls(status); + generic_handle_irq(irq - 1 + start); + status &= ~(1 << irq); + } +} + +static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) +{ + s5p_irq_demux_eint(IRQ_EINT(16)); + s5p_irq_demux_eint(IRQ_EINT(24)); +} + +static inline void s5p_irq_vic_eint_mask(unsigned int irq) +{ + s5p_irq_eint_mask(irq); +} + +static void s5p_irq_vic_eint_unmask(unsigned int irq) +{ + s5p_irq_eint_unmask(irq); +} + +static inline void s5p_irq_vic_eint_ack(unsigned int irq) +{ + __raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq))); +} + +static void s5p_irq_vic_eint_maskack(unsigned int irq) +{ + s5p_irq_vic_eint_mask(irq); + s5p_irq_vic_eint_ack(irq); +} + +static struct irq_chip s5p_irq_vic_eint = { + .name = "s5p_vic_eint", + .mask = s5p_irq_vic_eint_mask, + .unmask = s5p_irq_vic_eint_unmask, + .mask_ack = s5p_irq_vic_eint_maskack, + .ack = s5p_irq_vic_eint_ack, + .set_type = s5p_irq_eint_set_type, +#ifdef CONFIG_PM + .set_wake = s3c_irqext_wake, +#endif +}; + +int __init s5p_init_irq_eint(void) +{ + int irq; + + for (irq = IRQ_EINT(0); irq <= IRQ_EINT(15); irq++) + set_irq_chip(irq, &s5p_irq_vic_eint); + + for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) { + set_irq_chip(irq, &s5p_irq_eint); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } + + set_irq_chained_handler(IRQ_EINT16_31, s5p_irq_demux_eint16_31); + return 0; +} + +arch_initcall(s5p_init_irq_eint); diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig deleted file mode 100644 index c7bd2bbda239..000000000000 --- a/arch/arm/plat-s5pc1xx/Kconfig +++ /dev/null @@ -1,47 +0,0 @@ -# Copyright 2009 Samsung Electronics Co. -# Byungho Min <bhmin@samsung.com> -# -# Licensed under GPLv2 - -config PLAT_S5PC1XX - bool - depends on ARCH_S5PC1XX - default y - select PLAT_S3C - select ARM_VIC - select NO_IOPORT - select ARCH_REQUIRE_GPIOLIB - select SAMSUNG_CLKSRC - select SAMSUNG_IRQ_UART - select SAMSUNG_IRQ_VIC_TIMER - select S3C_GPIO_TRACK - select S3C_GPIO_PULL_UPDOWN - select S5P_GPIO_DRVSTR - select S3C_GPIO_CFG_S3C24XX - select S3C_GPIO_CFG_S3C64XX - select SAMSUNG_GPIOLIB_4BIT - help - Base platform code for any Samsung S5PC1XX device - -if PLAT_S5PC1XX - -# Configuration options shared by all S3C64XX implementations - -config CPU_S5PC100_INIT - bool - help - Common initialisation code for the S5PC1XX - -config CPU_S5PC100_CLOCK - bool - help - Common clock support code for the S5PC1XX - -# platform specific device setup - -config S5PC1XX_SETUP_SDHCI_GPIO - bool - help - Common setup code for SDHCI gpio. - -endif diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile deleted file mode 100644 index 9ce6409a9e02..000000000000 --- a/arch/arm/plat-s5pc1xx/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# arch/arm/plat-s5pc1xx/Makefile -# -# Copyright 2009 Samsung Electronics Co. -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := dummy.o -obj- := - -# Core files - -obj-y += dev-uart.o -obj-y += cpu.o -obj-y += irq.o -obj-y += clock.o - -# CPU support - -obj-$(CONFIG_CPU_S5PC100_INIT) += s5pc100-init.o -obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o - -# Device setup - -obj-$(CONFIG_S5PC1XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c deleted file mode 100644 index 387f23190c3c..000000000000 --- a/arch/arm/plat-s5pc1xx/clock.c +++ /dev/null @@ -1,709 +0,0 @@ -/* linux/arch/arm/plat-s5pc1xx/clock.c - * - * Copyright 2009 Samsung Electronics Co. - * - * S5PC1XX Base clock support - * - * Based on plat-s3c64xx/clock.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> - -#include <plat/regs-clock.h> -#include <plat/devs.h> -#include <plat/clock.h> - -struct clk clk_27m = { - .name = "clk_27m", - .id = -1, - .rate = 27000000, -}; - -static int clk_48m_ctrl(struct clk *clk, int enable) -{ - unsigned long flags; - u32 val; - - /* can't rely on clock lock, this register has other usages */ - local_irq_save(flags); - - val = __raw_readl(S5PC100_CLKSRC1); - if (enable) - val |= S5PC100_CLKSRC1_CLK48M_MASK; - else - val &= ~S5PC100_CLKSRC1_CLK48M_MASK; - - __raw_writel(val, S5PC100_CLKSRC1); - local_irq_restore(flags); - - return 0; -} - -struct clk clk_48m = { - .name = "clk_48m", - .id = -1, - .rate = 48000000, - .enable = clk_48m_ctrl, -}; - -struct clk clk_54m = { - .name = "clk_54m", - .id = -1, - .rate = 54000000, -}; - -struct clk clk_hd0 = { - .name = "hclkd0", - .id = -1, - .rate = 0, - .parent = NULL, - .ctrlbit = 0, - .ops = &clk_ops_def_setrate, -}; - -struct clk clk_pd0 = { - .name = "pclkd0", - .id = -1, - .rate = 0, - .parent = NULL, - .ctrlbit = 0, - .ops = &clk_ops_def_setrate, -}; - -static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable) -{ - unsigned int ctrlbit = clk->ctrlbit; - u32 con; - - con = __raw_readl(reg); - if (enable) - con |= ctrlbit; - else - con &= ~ctrlbit; - __raw_writel(con, reg); - - return 0; -} - -static int s5pc100_clk_d00_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable); -} - -static int s5pc100_clk_d01_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable); -} - -static int s5pc100_clk_d02_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable); -} - -static int s5pc100_clk_d10_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable); -} - -static int s5pc100_clk_d11_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable); -} - -static int s5pc100_clk_d12_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable); -} - -static int s5pc100_clk_d13_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable); -} - -static int s5pc100_clk_d14_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable); -} - -static int s5pc100_clk_d15_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable); -} - -static int s5pc100_clk_d20_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable); -} - -int s5pc100_sclk0_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable); -} - -int s5pc100_sclk1_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable); -} - -static struct clk s5pc100_init_clocks_disable[] = { - { - .name = "dsi", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_DSI, - }, { - .name = "csi", - .id = -1, - .parent = &clk_h, - .enable = s5pc100_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_CSI, - }, { - .name = "ccan", - .id = 0, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_CCAN0, - }, { - .name = "ccan", - .id = 1, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_CCAN1, - }, { - .name = "keypad", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_KEYIF, - }, { - .name = "hclkd2", - .id = -1, - .parent = NULL, - .enable = s5pc100_clk_d20_ctrl, - .ctrlbit = S5PC100_CLKGATE_D20_HCLKD2, - }, { - .name = "iis-d2", - .id = -1, - .parent = NULL, - .enable = s5pc100_clk_d20_ctrl, - .ctrlbit = S5PC100_CLKGATE_D20_I2SD2, - }, -}; - -static struct clk s5pc100_init_clocks[] = { - /* System1 (D0_0) devices */ - { - .name = "intc", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_INTC, - }, { - .name = "tzic", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_TZIC, - }, { - .name = "cf-ata", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_CFCON, - }, { - .name = "mdma", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_MDMA, - }, { - .name = "g2d", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_G2D, - }, { - .name = "secss", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_SECSS, - }, { - .name = "cssys", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_CSSYS, - }, - - /* Memory (D0_1) devices */ - { - .name = "dmc", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_DMC, - }, { - .name = "sromc", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_SROMC, - }, { - .name = "onenand", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_ONENAND, - }, { - .name = "nand", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_NFCON, - }, { - .name = "intmem", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_INTMEM, - }, { - .name = "ebi", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_EBI, - }, - - /* System2 (D0_2) devices */ - { - .name = "seckey", - .id = -1, - .parent = &clk_pd0, - .enable = s5pc100_clk_d02_ctrl, - .ctrlbit = S5PC100_CLKGATE_D02_SECKEY, - }, { - .name = "sdm", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d02_ctrl, - .ctrlbit = S5PC100_CLKGATE_D02_SDM, - }, - - /* File (D1_0) devices */ - { - .name = "pdma", - .id = 0, - .parent = &clk_h, - .enable = s5pc100_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_PDMA0, - }, { - .name = "pdma", - .id = 1, - .parent = &clk_h, - .enable = s5pc100_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_PDMA1, - }, { - .name = "usb-host", - .id = -1, - .parent = &clk_h, - .enable = s5pc100_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_USBHOST, - }, { - .name = "otg", - .id = -1, - .parent = &clk_h, - .enable = s5pc100_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_USBOTG, - }, { - .name = "modem", - .id = -1, - .parent = &clk_h, - .enable = s5pc100_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_MODEMIF, - }, { - .name = "hsmmc", - .id = 0, - .parent = &clk_48m, - .enable = s5pc100_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_HSMMC0, - }, { - .name = "hsmmc", - .id = 1, - .parent = &clk_48m, - .enable = s5pc100_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_HSMMC1, - }, { - .name = "hsmmc", - .id = 2, - .parent = &clk_48m, - .enable = s5pc100_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_HSMMC2, - }, - - /* Multimedia1 (D1_1) devices */ - { - .name = "lcd", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_LCD, - }, { - .name = "rotator", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_ROTATOR, - }, { - .name = "fimc", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_FIMC0, - }, { - .name = "fimc", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_FIMC1, - }, { - .name = "fimc", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_FIMC2, - }, { - .name = "jpeg", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_JPEG, - }, { - .name = "g3d", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_G3D, - }, - - /* Multimedia2 (D1_2) devices */ - { - .name = "tv", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d12_ctrl, - .ctrlbit = S5PC100_CLKGATE_D12_TV, - }, { - .name = "vp", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d12_ctrl, - .ctrlbit = S5PC100_CLKGATE_D12_VP, - }, { - .name = "mixer", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d12_ctrl, - .ctrlbit = S5PC100_CLKGATE_D12_MIXER, - }, { - .name = "hdmi", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d12_ctrl, - .ctrlbit = S5PC100_CLKGATE_D12_HDMI, - }, { - .name = "mfc", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d12_ctrl, - .ctrlbit = S5PC100_CLKGATE_D12_MFC, - }, - - /* System (D1_3) devices */ - { - .name = "chipid", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_CHIPID, - }, { - .name = "gpio", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_GPIO, - }, { - .name = "apc", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_APC, - }, { - .name = "iec", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_IEC, - }, { - .name = "timers", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_PWM, - }, { - .name = "systimer", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_SYSTIMER, - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_WDT, - }, { - .name = "rtc", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_RTC, - }, - - /* Connectivity (D1_4) devices */ - { - .name = "uart", - .id = 0, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_UART0, - }, { - .name = "uart", - .id = 1, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_UART1, - }, { - .name = "uart", - .id = 2, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_UART2, - }, { - .name = "uart", - .id = 3, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_UART3, - }, { - .name = "i2c", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_IIC, - }, { - .name = "hdmi-i2c", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_HDMI_IIC, - }, { - .name = "spi", - .id = 0, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_SPI0, - }, { - .name = "spi", - .id = 1, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_SPI1, - }, { - .name = "spi", - .id = 2, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_SPI2, - }, { - .name = "irda", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_IRDA, - }, { - .name = "hsitx", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_HSITX, - }, { - .name = "hsirx", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_HSIRX, - }, - - /* Audio (D1_5) devices */ - { - .name = "iis", - .id = 0, - .parent = &clk_p, - .enable = s5pc100_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_IIS0, - }, { - .name = "iis", - .id = 1, - .parent = &clk_p, - .enable = s5pc100_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_IIS1, - }, { - .name = "iis", - .id = 2, - .parent = &clk_p, - .enable = s5pc100_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_IIS2, - }, { - .name = "ac97", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_AC97, - }, { - .name = "pcm", - .id = 0, - .parent = &clk_p, - .enable = s5pc100_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_PCM0, - }, { - .name = "pcm", - .id = 1, - .parent = &clk_p, - .enable = s5pc100_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_PCM1, - }, { - .name = "spdif", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_SPDIF, - }, { - .name = "adc", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_TSADC, - }, { - .name = "cg", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_CG, - }, - - /* Audio (D2_0) devices: all disabled */ - - /* Special Clocks 0 */ - { - .name = "sclk_hpm", - .id = -1, - .parent = NULL, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_HPM, - }, { - .name = "sclk_onenand", - .id = -1, - .parent = NULL, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_ONENAND, - }, { - .name = "spi_48", - .id = 0, - .parent = &clk_48m, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0_48, - }, { - .name = "spi_48", - .id = 1, - .parent = &clk_48m, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1_48, - }, { - .name = "spi_48", - .id = 2, - .parent = &clk_48m, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2_48, - }, { - .name = "mmc_48", - .id = 0, - .parent = &clk_48m, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0_48, - }, { - .name = "mmc_48", - .id = 1, - .parent = &clk_48m, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1_48, - }, { - .name = "mmc_48", - .id = 2, - .parent = &clk_48m, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2_48, - }, - /* Special Clocks 1 */ -}; - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_epll, - &clk_pd0, - &clk_hd0, - &clk_27m, - &clk_48m, - &clk_54m, -}; - -void __init s5pc1xx_register_clocks(void) -{ - struct clk *clkp; - int ret; - int ptr; - int size; - - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - s3c_register_clocks(s5pc100_init_clocks, - ARRAY_SIZE(s5pc100_init_clocks)); - - clkp = s5pc100_init_clocks_disable; - size = ARRAY_SIZE(s5pc100_init_clocks_disable); - - for (ptr = 0; ptr < size; ptr++, clkp++) { - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - - (clkp->enable)(clkp, 0); - } - - s3c_pwmclk_init(); -} diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c deleted file mode 100644 index 02baeaa2a121..000000000000 --- a/arch/arm/plat-s5pc1xx/cpu.c +++ /dev/null @@ -1,122 +0,0 @@ -/* linux/arch/arm/plat-s5pc1xx/cpu.c - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC1XX CPU Support - * - * Based on plat-s3c64xx/cpu.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> - -#include <asm/mach/map.h> - -#include <plat/regs-serial.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/clock.h> - -#include <plat/s5pc100.h> - -/* table of supported CPUs */ - -static const char name_s5pc100[] = "S5PC100"; - -static struct cpu_table cpu_ids[] __initdata = { - { - .idcode = 0x43100000, - .idmask = 0xfffff000, - .map_io = s5pc100_map_io, - .init_clocks = s5pc100_init_clocks, - .init_uarts = s5pc100_init_uarts, - .init = s5pc100_init, - .name = name_s5pc100, - }, -}; -/* minimal IO mapping */ - -/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */ -#define UART_OFFS (S3C_PA_UART & 0xffff) - -static struct map_desc s5pc1xx_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5PC1XX_VA_CLK_OTHER, - .pfn = __phys_to_pfn(S5PC1XX_PA_CLK_OTHER), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5PC1XX_VA_GPIO, - .pfn = __phys_to_pfn(S5PC100_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5PC1XX_VA_CHIPID, - .pfn = __phys_to_pfn(S5PC1XX_PA_CHIPID), - .length = SZ_16, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5PC1XX_VA_CLK, - .pfn = __phys_to_pfn(S5PC1XX_PA_CLK), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5PC1XX_VA_PWR, - .pfn = __phys_to_pfn(S5PC1XX_PA_PWR), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)(S5PC1XX_VA_UART), - .pfn = __phys_to_pfn(S5PC1XX_PA_UART), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5PC1XX_VA_VIC(0), - .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(0)), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5PC1XX_VA_VIC(1), - .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(1)), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5PC1XX_VA_VIC(2), - .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(2)), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5PC1XX_VA_TIMER, - .pfn = __phys_to_pfn(S5PC1XX_PA_TIMER), - .length = SZ_256, - .type = MT_DEVICE, - }, -}; - -/* read cpu identification code */ - -void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size) -{ - unsigned long idcode; - - /* initialise the io descriptors we need for initialisation */ - iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc)); - iotable_init(mach_desc, size); - - idcode = __raw_readl(S5PC1XX_VA_CHIPID); - s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); -} diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c deleted file mode 100644 index 586c95c60bfe..000000000000 --- a/arch/arm/plat-s5pc1xx/dev-uart.c +++ /dev/null @@ -1,145 +0,0 @@ -/* linux/arch/arm/plat-s5pc1xx/dev-uart.c - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * Based on plat-s3c64xx/dev-uart.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/platform_device.h> - -#include <asm/mach/arch.h> -#include <asm/mach/irq.h> -#include <mach/hardware.h> -#include <mach/map.h> - -#include <plat/devs.h> - -/* Serial port registrations */ - -/* 64xx uarts are closer together */ - -static struct resource s5pc1xx_uart0_resource[] = { - [0] = { - .start = S3C_PA_UART0, - .end = S3C_PA_UART0 + 0x100, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S3CUART_RX0, - .end = IRQ_S3CUART_RX0, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S3CUART_TX0, - .end = IRQ_S3CUART_TX0, - .flags = IORESOURCE_IRQ, - - }, - [3] = { - .start = IRQ_S3CUART_ERR0, - .end = IRQ_S3CUART_ERR0, - .flags = IORESOURCE_IRQ, - } -}; - -static struct resource s5pc1xx_uart1_resource[] = { - [0] = { - .start = S3C_PA_UART1, - .end = S3C_PA_UART1 + 0x100, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S3CUART_RX1, - .end = IRQ_S3CUART_RX1, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S3CUART_TX1, - .end = IRQ_S3CUART_TX1, - .flags = IORESOURCE_IRQ, - - }, - [3] = { - .start = IRQ_S3CUART_ERR1, - .end = IRQ_S3CUART_ERR1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource s5pc1xx_uart2_resource[] = { - [0] = { - .start = S3C_PA_UART2, - .end = S3C_PA_UART2 + 0x100, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S3CUART_RX2, - .end = IRQ_S3CUART_RX2, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S3CUART_TX2, - .end = IRQ_S3CUART_TX2, - .flags = IORESOURCE_IRQ, - - }, - [3] = { - .start = IRQ_S3CUART_ERR2, - .end = IRQ_S3CUART_ERR2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource s5pc1xx_uart3_resource[] = { - [0] = { - .start = S3C_PA_UART3, - .end = S3C_PA_UART3 + 0x100, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S3CUART_RX3, - .end = IRQ_S3CUART_RX3, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S3CUART_TX3, - .end = IRQ_S3CUART_TX3, - .flags = IORESOURCE_IRQ, - - }, - [3] = { - .start = IRQ_S3CUART_ERR3, - .end = IRQ_S3CUART_ERR3, - .flags = IORESOURCE_IRQ, - }, -}; - - -struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = { - [0] = { - .resources = s5pc1xx_uart0_resource, - .nr_resources = ARRAY_SIZE(s5pc1xx_uart0_resource), - }, - [1] = { - .resources = s5pc1xx_uart1_resource, - .nr_resources = ARRAY_SIZE(s5pc1xx_uart1_resource), - }, - [2] = { - .resources = s5pc1xx_uart2_resource, - .nr_resources = ARRAY_SIZE(s5pc1xx_uart2_resource), - }, - [3] = { - .resources = s5pc1xx_uart3_resource, - .nr_resources = ARRAY_SIZE(s5pc1xx_uart3_resource), - }, -}; diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h deleted file mode 100644 index 33ad267e8477..000000000000 --- a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h +++ /dev/null @@ -1,44 +0,0 @@ -/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-eint.h - * - * Copyright 2009 Samsung Electronics Co. - * - * External Interrupt (GPH0 ~ GPH3) control register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S5PC1XX_WKUP_INT_CON0_7 (S5PC1XX_EINT_BASE + 0x0) -#define S5PC1XX_WKUP_INT_CON8_15 (S5PC1XX_EINT_BASE + 0x4) -#define S5PC1XX_WKUP_INT_CON16_23 (S5PC1XX_EINT_BASE + 0x8) -#define S5PC1XX_WKUP_INT_CON24_31 (S5PC1XX_EINT_BASE + 0xC) -#define S5PC1XX_WKUP_INT_CON(x) (S5PC1XX_WKUP_INT_CON0_7 + (x * 0x4)) - -#define S5PC1XX_WKUP_INT_FLTCON0_3 (S5PC1XX_EINT_BASE + 0x80) -#define S5PC1XX_WKUP_INT_FLTCON4_7 (S5PC1XX_EINT_BASE + 0x84) -#define S5PC1XX_WKUP_INT_FLTCON8_11 (S5PC1XX_EINT_BASE + 0x88) -#define S5PC1XX_WKUP_INT_FLTCON12_15 (S5PC1XX_EINT_BASE + 0x8C) -#define S5PC1XX_WKUP_INT_FLTCON16_19 (S5PC1XX_EINT_BASE + 0x90) -#define S5PC1XX_WKUP_INT_FLTCON20_23 (S5PC1XX_EINT_BASE + 0x94) -#define S5PC1XX_WKUP_INT_FLTCON24_27 (S5PC1XX_EINT_BASE + 0x98) -#define S5PC1XX_WKUP_INT_FLTCON28_31 (S5PC1XX_EINT_BASE + 0x9C) -#define S5PC1XX_WKUP_INT_FLTCON(x) (S5PC1XX_WKUP_INT_FLTCON0_3 + (x * 0x4)) - -#define S5PC1XX_WKUP_INT_MASK0_7 (S5PC1XX_EINT_BASE + 0x100) -#define S5PC1XX_WKUP_INT_MASK8_15 (S5PC1XX_EINT_BASE + 0x104) -#define S5PC1XX_WKUP_INT_MASK16_23 (S5PC1XX_EINT_BASE + 0x108) -#define S5PC1XX_WKUP_INT_MASK24_31 (S5PC1XX_EINT_BASE + 0x10C) -#define S5PC1XX_WKUP_INT_MASK(x) (S5PC1XX_WKUP_INT_MASK0_7 + (x * 0x4)) - -#define S5PC1XX_WKUP_INT_PEND0_7 (S5PC1XX_EINT_BASE + 0x140) -#define S5PC1XX_WKUP_INT_PEND8_15 (S5PC1XX_EINT_BASE + 0x144) -#define S5PC1XX_WKUP_INT_PEND16_23 (S5PC1XX_EINT_BASE + 0x148) -#define S5PC1XX_WKUP_INT_PEND24_31 (S5PC1XX_EINT_BASE + 0x14C) -#define S5PC1XX_WKUP_INT_PEND(x) (S5PC1XX_WKUP_INT_PEND0_7 + (x * 0x4)) - -#define S5PC1XX_WKUP_INT_LOWLEV (0x00) -#define S5PC1XX_WKUP_INT_HILEV (0x01) -#define S5PC1XX_WKUP_INT_FALLEDGE (0x02) -#define S5PC1XX_WKUP_INT_RISEEDGE (0x03) -#define S5PC1XX_WKUP_INT_BOTHEDGE (0x04) diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h deleted file mode 100644 index 409c804315e8..000000000000 --- a/arch/arm/plat-s5pc1xx/include/plat/irqs.h +++ /dev/null @@ -1,198 +0,0 @@ -/* linux/arch/arm/plat-s5pc1xx/include/plat/irqs.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC1XX - Common IRQ support - * - * Based on plat-s3c64xx/include/plat/irqs.h - */ - -#ifndef __ASM_PLAT_S5PC1XX_IRQS_H -#define __ASM_PLAT_S5PC1XX_IRQS_H __FILE__ - -/* we keep the first set of CPU IRQs out of the range of - * the ISA space, so that the PC104 has them to itself - * and we don't end up having to do horrible things to the - * standard ISA drivers.... - * - * note, since we're using the VICs, our start must be a - * mulitple of 32 to allow the common code to work - */ - -#define S3C_IRQ_OFFSET (32) - -#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET) - -#define S3C_VIC0_BASE S3C_IRQ(0) -#define S3C_VIC1_BASE S3C_IRQ(32) -#define S3C_VIC2_BASE S3C_IRQ(64) - -/* UART interrupts, each UART has 4 intterupts per channel so - * use the space between the ISA and S3C main interrupts. Note, these - * are not in the same order as the S3C24XX series! */ - -#define IRQ_S3CUART_BASE0 (16) -#define IRQ_S3CUART_BASE1 (20) -#define IRQ_S3CUART_BASE2 (24) -#define IRQ_S3CUART_BASE3 (28) - -#define UART_IRQ_RXD (0) -#define UART_IRQ_ERR (1) -#define UART_IRQ_TXD (2) -#define UART_IRQ_MODEM (3) - -#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD) -#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD) -#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR) - -#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD) -#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD) -#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR) - -#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD) -#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD) -#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR) - -#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD) -#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD) -#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR) - -/* VIC based IRQs */ - -#define S5PC1XX_IRQ_VIC0(x) (S3C_VIC0_BASE + (x)) -#define S5PC1XX_IRQ_VIC1(x) (S3C_VIC1_BASE + (x)) -#define S5PC1XX_IRQ_VIC2(x) (S3C_VIC2_BASE + (x)) - -/* - * VIC0: system, DMA, timer - */ -#define IRQ_EINT0 S5PC1XX_IRQ_VIC0(0) -#define IRQ_EINT1 S5PC1XX_IRQ_VIC0(1) -#define IRQ_EINT2 S5PC1XX_IRQ_VIC0(2) -#define IRQ_EINT3 S5PC1XX_IRQ_VIC0(3) -#define IRQ_EINT4 S5PC1XX_IRQ_VIC0(4) -#define IRQ_EINT5 S5PC1XX_IRQ_VIC0(5) -#define IRQ_EINT6 S5PC1XX_IRQ_VIC0(6) -#define IRQ_EINT7 S5PC1XX_IRQ_VIC0(7) -#define IRQ_EINT8 S5PC1XX_IRQ_VIC0(8) -#define IRQ_EINT9 S5PC1XX_IRQ_VIC0(9) -#define IRQ_EINT10 S5PC1XX_IRQ_VIC0(10) -#define IRQ_EINT11 S5PC1XX_IRQ_VIC0(11) -#define IRQ_EINT12 S5PC1XX_IRQ_VIC0(12) -#define IRQ_EINT13 S5PC1XX_IRQ_VIC0(13) -#define IRQ_EINT14 S5PC1XX_IRQ_VIC0(14) -#define IRQ_EINT15 S5PC1XX_IRQ_VIC0(15) -#define IRQ_EINT16_31 S5PC1XX_IRQ_VIC0(16) -#define IRQ_BATF S5PC1XX_IRQ_VIC0(17) -#define IRQ_MDMA S5PC1XX_IRQ_VIC0(18) -#define IRQ_PDMA0 S5PC1XX_IRQ_VIC0(19) -#define IRQ_PDMA1 S5PC1XX_IRQ_VIC0(20) -#define IRQ_TIMER0_VIC S5PC1XX_IRQ_VIC0(21) -#define IRQ_TIMER1_VIC S5PC1XX_IRQ_VIC0(22) -#define IRQ_TIMER2_VIC S5PC1XX_IRQ_VIC0(23) -#define IRQ_TIMER3_VIC S5PC1XX_IRQ_VIC0(24) -#define IRQ_TIMER4_VIC S5PC1XX_IRQ_VIC0(25) -#define IRQ_SYSTIMER S5PC1XX_IRQ_VIC0(26) -#define IRQ_WDT S5PC1XX_IRQ_VIC0(27) -#define IRQ_RTC_ALARM S5PC1XX_IRQ_VIC0(28) -#define IRQ_RTC_TIC S5PC1XX_IRQ_VIC0(29) -#define IRQ_GPIOINT S5PC1XX_IRQ_VIC0(30) - -/* - * VIC1: ARM, power, memory, connectivity - */ -#define IRQ_CORTEX0 S5PC1XX_IRQ_VIC1(0) -#define IRQ_CORTEX1 S5PC1XX_IRQ_VIC1(1) -#define IRQ_CORTEX2 S5PC1XX_IRQ_VIC1(2) -#define IRQ_CORTEX3 S5PC1XX_IRQ_VIC1(3) -#define IRQ_CORTEX4 S5PC1XX_IRQ_VIC1(4) -#define IRQ_IEMAPC S5PC1XX_IRQ_VIC1(5) -#define IRQ_IEMIEC S5PC1XX_IRQ_VIC1(6) -#define IRQ_ONENAND S5PC1XX_IRQ_VIC1(7) -#define IRQ_NFC S5PC1XX_IRQ_VIC1(8) -#define IRQ_CFC S5PC1XX_IRQ_VIC1(9) -#define IRQ_UART0 S5PC1XX_IRQ_VIC1(10) -#define IRQ_UART1 S5PC1XX_IRQ_VIC1(11) -#define IRQ_UART2 S5PC1XX_IRQ_VIC1(12) -#define IRQ_UART3 S5PC1XX_IRQ_VIC1(13) -#define IRQ_IIC S5PC1XX_IRQ_VIC1(14) -#define IRQ_SPI0 S5PC1XX_IRQ_VIC1(15) -#define IRQ_SPI1 S5PC1XX_IRQ_VIC1(16) -#define IRQ_SPI2 S5PC1XX_IRQ_VIC1(17) -#define IRQ_IRDA S5PC1XX_IRQ_VIC1(18) -#define IRQ_CAN0 S5PC1XX_IRQ_VIC1(19) -#define IRQ_CAN1 S5PC1XX_IRQ_VIC1(20) -#define IRQ_HSIRX S5PC1XX_IRQ_VIC1(21) -#define IRQ_HSITX S5PC1XX_IRQ_VIC1(22) -#define IRQ_UHOST S5PC1XX_IRQ_VIC1(23) -#define IRQ_OTG S5PC1XX_IRQ_VIC1(24) -#define IRQ_MSM S5PC1XX_IRQ_VIC1(25) -#define IRQ_HSMMC0 S5PC1XX_IRQ_VIC1(26) -#define IRQ_HSMMC1 S5PC1XX_IRQ_VIC1(27) -#define IRQ_HSMMC2 S5PC1XX_IRQ_VIC1(28) -#define IRQ_MIPICSI S5PC1XX_IRQ_VIC1(29) -#define IRQ_MIPIDSI S5PC1XX_IRQ_VIC1(30) - -/* - * VIC2: multimedia, audio, security - */ -#define IRQ_LCD0 S5PC1XX_IRQ_VIC2(0) -#define IRQ_LCD1 S5PC1XX_IRQ_VIC2(1) -#define IRQ_LCD2 S5PC1XX_IRQ_VIC2(2) -#define IRQ_LCD3 S5PC1XX_IRQ_VIC2(3) -#define IRQ_ROTATOR S5PC1XX_IRQ_VIC2(4) -#define IRQ_FIMC0 S5PC1XX_IRQ_VIC2(5) -#define IRQ_FIMC1 S5PC1XX_IRQ_VIC2(6) -#define IRQ_FIMC2 S5PC1XX_IRQ_VIC2(7) -#define IRQ_JPEG S5PC1XX_IRQ_VIC2(8) -#define IRQ_2D S5PC1XX_IRQ_VIC2(9) -#define IRQ_3D S5PC1XX_IRQ_VIC2(10) -#define IRQ_MIXER S5PC1XX_IRQ_VIC2(11) -#define IRQ_HDMI S5PC1XX_IRQ_VIC2(12) -#define IRQ_IIC1 S5PC1XX_IRQ_VIC2(13) -#define IRQ_MFC S5PC1XX_IRQ_VIC2(14) -#define IRQ_TVENC S5PC1XX_IRQ_VIC2(15) -#define IRQ_I2S0 S5PC1XX_IRQ_VIC2(16) -#define IRQ_I2S1 S5PC1XX_IRQ_VIC2(17) -#define IRQ_I2S2 S5PC1XX_IRQ_VIC2(18) -#define IRQ_AC97 S5PC1XX_IRQ_VIC2(19) -#define IRQ_PCM0 S5PC1XX_IRQ_VIC2(20) -#define IRQ_PCM1 S5PC1XX_IRQ_VIC2(21) -#define IRQ_SPDIF S5PC1XX_IRQ_VIC2(22) -#define IRQ_ADC S5PC1XX_IRQ_VIC2(23) -#define IRQ_PENDN S5PC1XX_IRQ_VIC2(24) -#define IRQ_TC IRQ_PENDN -#define IRQ_KEYPAD S5PC1XX_IRQ_VIC2(25) -#define IRQ_CG S5PC1XX_IRQ_VIC2(26) -#define IRQ_SEC S5PC1XX_IRQ_VIC2(27) -#define IRQ_SECRX S5PC1XX_IRQ_VIC2(28) -#define IRQ_SECTX S5PC1XX_IRQ_VIC2(29) -#define IRQ_SDMIRQ S5PC1XX_IRQ_VIC2(30) -#define IRQ_SDMFIQ S5PC1XX_IRQ_VIC2(31) - -#define IRQ_TIMER(x) (IRQ_SDMFIQ + 1 + (x)) -#define IRQ_TIMER0 IRQ_TIMER(0) -#define IRQ_TIMER1 IRQ_TIMER(1) -#define IRQ_TIMER2 IRQ_TIMER(2) -#define IRQ_TIMER3 IRQ_TIMER(3) -#define IRQ_TIMER4 IRQ_TIMER(4) - -/* External interrupt */ -#define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 6) - -#define S3C_EINT(x) (S3C_IRQ_EINT_BASE + (x - 16)) -#define IRQ_EINT(x) (x < 16 ? IRQ_EINT0 + x : S3C_EINT(x)) -#define IRQ_EINT_BIT(x) (x < IRQ_EINT16_31 ? x - IRQ_EINT0 : x - S3C_EINT(0)) - -/* GPIO interrupt */ -#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1) -#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x)) - -/* - * Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs - */ -#define NR_IRQS (S3C_IRQ_GPIO(320) + 1) - -#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */ - diff --git a/arch/arm/plat-s5pc1xx/include/plat/pll.h b/arch/arm/plat-s5pc1xx/include/plat/pll.h deleted file mode 100644 index 21afef1573e7..000000000000 --- a/arch/arm/plat-s5pc1xx/include/plat/pll.h +++ /dev/null @@ -1,38 +0,0 @@ -/* arch/arm/plat-s5pc1xx/include/plat/pll.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC1XX PLL code - * - * Based on plat-s3c64xx/include/plat/pll.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S5P_PLL_MDIV_MASK ((1 << (25-16+1)) - 1) -#define S5P_PLL_PDIV_MASK ((1 << (13-8+1)) - 1) -#define S5P_PLL_SDIV_MASK ((1 << (2-0+1)) - 1) -#define S5P_PLL_MDIV_SHIFT (16) -#define S5P_PLL_PDIV_SHIFT (8) -#define S5P_PLL_SDIV_SHIFT (0) - -#include <asm/div64.h> - -static inline unsigned long s5pc1xx_get_pll(unsigned long baseclk, - u32 pllcon) -{ - u32 mdiv, pdiv, sdiv; - u64 fvco = baseclk; - - mdiv = (pllcon >> S5P_PLL_MDIV_SHIFT) & S5P_PLL_MDIV_MASK; - pdiv = (pllcon >> S5P_PLL_PDIV_SHIFT) & S5P_PLL_PDIV_MASK; - sdiv = (pllcon >> S5P_PLL_SDIV_SHIFT) & S5P_PLL_SDIV_MASK; - - fvco *= mdiv; - do_div(fvco, (pdiv << sdiv)); - - return (unsigned long)fvco; -} diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h deleted file mode 100644 index 24dec4e52538..000000000000 --- a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h +++ /dev/null @@ -1,252 +0,0 @@ -/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC1XX clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_REGS_CLOCK_H -#define __PLAT_REGS_CLOCK_H __FILE__ - -#define S5PC100_CLKREG(x) (S5PC1XX_VA_CLK + (x)) -#define S5PC100_CLKREG_OTHER(x) (S5PC1XX_VA_CLK_OTHER + (x)) - -/* s5pc100 register for clock */ -#define S5PC100_APLL_LOCK S5PC100_CLKREG(0x00) -#define S5PC100_MPLL_LOCK S5PC100_CLKREG(0x04) -#define S5PC100_EPLL_LOCK S5PC100_CLKREG(0x08) -#define S5PC100_HPLL_LOCK S5PC100_CLKREG(0x0C) - -#define S5PC100_APLL_CON S5PC100_CLKREG(0x100) -#define S5PC100_MPLL_CON S5PC100_CLKREG(0x104) -#define S5PC100_EPLL_CON S5PC100_CLKREG(0x108) -#define S5PC100_HPLL_CON S5PC100_CLKREG(0x10C) - -#define S5PC100_CLKSRC0 S5PC100_CLKREG(0x200) -#define S5PC100_CLKSRC1 S5PC100_CLKREG(0x204) -#define S5PC100_CLKSRC2 S5PC100_CLKREG(0x208) -#define S5PC100_CLKSRC3 S5PC100_CLKREG(0x20C) - -#define S5PC100_CLKDIV0 S5PC100_CLKREG(0x300) -#define S5PC100_CLKDIV1 S5PC100_CLKREG(0x304) -#define S5PC100_CLKDIV2 S5PC100_CLKREG(0x308) -#define S5PC100_CLKDIV3 S5PC100_CLKREG(0x30C) -#define S5PC100_CLKDIV4 S5PC100_CLKREG(0x310) - -#define S5PC100_CLK_OUT S5PC100_CLKREG(0x400) - -#define S5PC100_CLKGATE_D00 S5PC100_CLKREG(0x500) -#define S5PC100_CLKGATE_D01 S5PC100_CLKREG(0x504) -#define S5PC100_CLKGATE_D02 S5PC100_CLKREG(0x508) - -#define S5PC100_CLKGATE_D10 S5PC100_CLKREG(0x520) -#define S5PC100_CLKGATE_D11 S5PC100_CLKREG(0x524) -#define S5PC100_CLKGATE_D12 S5PC100_CLKREG(0x528) -#define S5PC100_CLKGATE_D13 S5PC100_CLKREG(0x52C) -#define S5PC100_CLKGATE_D14 S5PC100_CLKREG(0x530) -#define S5PC100_CLKGATE_D15 S5PC100_CLKREG(0x534) - -#define S5PC100_CLKGATE_D20 S5PC100_CLKREG(0x540) - -#define S5PC100_SCLKGATE0 S5PC100_CLKREG(0x560) -#define S5PC100_SCLKGATE1 S5PC100_CLKREG(0x564) - -/* EPLL_CON */ -#define S5PC100_EPLL_EN (1<<31) -#define S5PC100_EPLL_MASK 0xffffffff -#define S5PC100_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s))) - -/* CLKSRC0..CLKSRC3 -> mostly removed due to clksrc updates */ -#define S5PC100_CLKSRC1_CLK48M_MASK (0x1<<24) -#define S5PC100_CLKSRC1_CLK48M_SHIFT (24) - -/* CLKDIV0 */ -#define S5PC100_CLKDIV0_APLL_MASK (0x1<<0) -#define S5PC100_CLKDIV0_APLL_SHIFT (0) -#define S5PC100_CLKDIV0_ARM_MASK (0x7<<4) -#define S5PC100_CLKDIV0_ARM_SHIFT (4) -#define S5PC100_CLKDIV0_D0_MASK (0x7<<8) -#define S5PC100_CLKDIV0_D0_SHIFT (8) -#define S5PC100_CLKDIV0_PCLKD0_MASK (0x7<<12) -#define S5PC100_CLKDIV0_PCLKD0_SHIFT (12) -#define S5PC100_CLKDIV0_SECSS_MASK (0x7<<16) -#define S5PC100_CLKDIV0_SECSS_SHIFT (16) - -/* CLKDIV1 (OneNAND clock only used in one place, removed) */ -#define S5PC100_CLKDIV1_APLL2_MASK (0x7<<0) -#define S5PC100_CLKDIV1_APLL2_SHIFT (0) -#define S5PC100_CLKDIV1_MPLL_MASK (0x3<<4) -#define S5PC100_CLKDIV1_MPLL_SHIFT (4) -#define S5PC100_CLKDIV1_MPLL2_MASK (0x1<<8) -#define S5PC100_CLKDIV1_MPLL2_SHIFT (8) -#define S5PC100_CLKDIV1_D1_MASK (0x7<<12) -#define S5PC100_CLKDIV1_D1_SHIFT (12) -#define S5PC100_CLKDIV1_PCLKD1_MASK (0x7<<16) -#define S5PC100_CLKDIV1_PCLKD1_SHIFT (16) -#define S5PC100_CLKDIV1_CAM_MASK (0x1F<<24) -#define S5PC100_CLKDIV1_CAM_SHIFT (24) - -/* CLKDIV2 => removed in clksrc update */ -/* CLKDIV3 => removed in clksrc update, or not needed */ -/* CLKDIV4 => removed in clksrc update, or not needed */ - -/* HCLKD0/PCLKD0 Clock Gate 0 Registers */ -#define S5PC100_CLKGATE_D00_INTC (1<<0) -#define S5PC100_CLKGATE_D00_TZIC (1<<1) -#define S5PC100_CLKGATE_D00_CFCON (1<<2) -#define S5PC100_CLKGATE_D00_MDMA (1<<3) -#define S5PC100_CLKGATE_D00_G2D (1<<4) -#define S5PC100_CLKGATE_D00_SECSS (1<<5) -#define S5PC100_CLKGATE_D00_CSSYS (1<<6) - -/* HCLKD0/PCLKD0 Clock Gate 1 Registers */ -#define S5PC100_CLKGATE_D01_DMC (1<<0) -#define S5PC100_CLKGATE_D01_SROMC (1<<1) -#define S5PC100_CLKGATE_D01_ONENAND (1<<2) -#define S5PC100_CLKGATE_D01_NFCON (1<<3) -#define S5PC100_CLKGATE_D01_INTMEM (1<<4) -#define S5PC100_CLKGATE_D01_EBI (1<<5) - -/* PCLKD0 Clock Gate 2 Registers */ -#define S5PC100_CLKGATE_D02_SECKEY (1<<1) -#define S5PC100_CLKGATE_D02_SDM (1<<2) - -/* HCLKD1/PCLKD1 Clock Gate 0 Registers */ -#define S5PC100_CLKGATE_D10_PDMA0 (1<<0) -#define S5PC100_CLKGATE_D10_PDMA1 (1<<1) -#define S5PC100_CLKGATE_D10_USBHOST (1<<2) -#define S5PC100_CLKGATE_D10_USBOTG (1<<3) -#define S5PC100_CLKGATE_D10_MODEMIF (1<<4) -#define S5PC100_CLKGATE_D10_HSMMC0 (1<<5) -#define S5PC100_CLKGATE_D10_HSMMC1 (1<<6) -#define S5PC100_CLKGATE_D10_HSMMC2 (1<<7) - -/* HCLKD1/PCLKD1 Clock Gate 1 Registers */ -#define S5PC100_CLKGATE_D11_LCD (1<<0) -#define S5PC100_CLKGATE_D11_ROTATOR (1<<1) -#define S5PC100_CLKGATE_D11_FIMC0 (1<<2) -#define S5PC100_CLKGATE_D11_FIMC1 (1<<3) -#define S5PC100_CLKGATE_D11_FIMC2 (1<<4) -#define S5PC100_CLKGATE_D11_JPEG (1<<5) -#define S5PC100_CLKGATE_D11_DSI (1<<6) -#define S5PC100_CLKGATE_D11_CSI (1<<7) -#define S5PC100_CLKGATE_D11_G3D (1<<8) - -/* HCLKD1/PCLKD1 Clock Gate 2 Registers */ -#define S5PC100_CLKGATE_D12_TV (1<<0) -#define S5PC100_CLKGATE_D12_VP (1<<1) -#define S5PC100_CLKGATE_D12_MIXER (1<<2) -#define S5PC100_CLKGATE_D12_HDMI (1<<3) -#define S5PC100_CLKGATE_D12_MFC (1<<4) - -/* HCLKD1/PCLKD1 Clock Gate 3 Registers */ -#define S5PC100_CLKGATE_D13_CHIPID (1<<0) -#define S5PC100_CLKGATE_D13_GPIO (1<<1) -#define S5PC100_CLKGATE_D13_APC (1<<2) -#define S5PC100_CLKGATE_D13_IEC (1<<3) -#define S5PC100_CLKGATE_D13_PWM (1<<6) -#define S5PC100_CLKGATE_D13_SYSTIMER (1<<7) -#define S5PC100_CLKGATE_D13_WDT (1<<8) -#define S5PC100_CLKGATE_D13_RTC (1<<9) - -/* HCLKD1/PCLKD1 Clock Gate 4 Registers */ -#define S5PC100_CLKGATE_D14_UART0 (1<<0) -#define S5PC100_CLKGATE_D14_UART1 (1<<1) -#define S5PC100_CLKGATE_D14_UART2 (1<<2) -#define S5PC100_CLKGATE_D14_UART3 (1<<3) -#define S5PC100_CLKGATE_D14_IIC (1<<4) -#define S5PC100_CLKGATE_D14_HDMI_IIC (1<<5) -#define S5PC100_CLKGATE_D14_SPI0 (1<<6) -#define S5PC100_CLKGATE_D14_SPI1 (1<<7) -#define S5PC100_CLKGATE_D14_SPI2 (1<<8) -#define S5PC100_CLKGATE_D14_IRDA (1<<9) -#define S5PC100_CLKGATE_D14_CCAN0 (1<<10) -#define S5PC100_CLKGATE_D14_CCAN1 (1<<11) -#define S5PC100_CLKGATE_D14_HSITX (1<<12) -#define S5PC100_CLKGATE_D14_HSIRX (1<<13) - -/* HCLKD1/PCLKD1 Clock Gate 5 Registers */ -#define S5PC100_CLKGATE_D15_IIS0 (1<<0) -#define S5PC100_CLKGATE_D15_IIS1 (1<<1) -#define S5PC100_CLKGATE_D15_IIS2 (1<<2) -#define S5PC100_CLKGATE_D15_AC97 (1<<3) -#define S5PC100_CLKGATE_D15_PCM0 (1<<4) -#define S5PC100_CLKGATE_D15_PCM1 (1<<5) -#define S5PC100_CLKGATE_D15_SPDIF (1<<6) -#define S5PC100_CLKGATE_D15_TSADC (1<<7) -#define S5PC100_CLKGATE_D15_KEYIF (1<<8) -#define S5PC100_CLKGATE_D15_CG (1<<9) - -/* HCLKD2 Clock Gate 0 Registers */ -#define S5PC100_CLKGATE_D20_HCLKD2 (1<<0) -#define S5PC100_CLKGATE_D20_I2SD2 (1<<1) - -/* Special Clock Gate 0 Registers */ -#define S5PC100_CLKGATE_SCLK0_HPM (1<<0) -#define S5PC100_CLKGATE_SCLK0_PWI (1<<1) -#define S5PC100_CLKGATE_SCLK0_ONENAND (1<<2) -#define S5PC100_CLKGATE_SCLK0_UART (1<<3) -#define S5PC100_CLKGATE_SCLK0_SPI0 (1<<4) -#define S5PC100_CLKGATE_SCLK0_SPI1 (1<<5) -#define S5PC100_CLKGATE_SCLK0_SPI2 (1<<6) -#define S5PC100_CLKGATE_SCLK0_SPI0_48 (1<<7) -#define S5PC100_CLKGATE_SCLK0_SPI1_48 (1<<8) -#define S5PC100_CLKGATE_SCLK0_SPI2_48 (1<<9) -#define S5PC100_CLKGATE_SCLK0_IRDA (1<<10) -#define S5PC100_CLKGATE_SCLK0_USBHOST (1<<11) -#define S5PC100_CLKGATE_SCLK0_MMC0 (1<<12) -#define S5PC100_CLKGATE_SCLK0_MMC1 (1<<13) -#define S5PC100_CLKGATE_SCLK0_MMC2 (1<<14) -#define S5PC100_CLKGATE_SCLK0_MMC0_48 (1<<15) -#define S5PC100_CLKGATE_SCLK0_MMC1_48 (1<<16) -#define S5PC100_CLKGATE_SCLK0_MMC2_48 (1<<17) - -/* Special Clock Gate 1 Registers */ -#define S5PC100_CLKGATE_SCLK1_LCD (1<<0) -#define S5PC100_CLKGATE_SCLK1_FIMC0 (1<<1) -#define S5PC100_CLKGATE_SCLK1_FIMC1 (1<<2) -#define S5PC100_CLKGATE_SCLK1_FIMC2 (1<<3) -#define S5PC100_CLKGATE_SCLK1_TV54 (1<<4) -#define S5PC100_CLKGATE_SCLK1_VDAC54 (1<<5) -#define S5PC100_CLKGATE_SCLK1_MIXER (1<<6) -#define S5PC100_CLKGATE_SCLK1_HDMI (1<<7) -#define S5PC100_CLKGATE_SCLK1_AUDIO0 (1<<8) -#define S5PC100_CLKGATE_SCLK1_AUDIO1 (1<<9) -#define S5PC100_CLKGATE_SCLK1_AUDIO2 (1<<10) -#define S5PC100_CLKGATE_SCLK1_SPDIF (1<<11) -#define S5PC100_CLKGATE_SCLK1_CAM (1<<12) - -#define S5PC100_SWRESET S5PC100_CLKREG_OTHER(0x000) -#define S5PC100_OND_SWRESET S5PC100_CLKREG_OTHER(0x008) -#define S5PC100_GEN_CTRL S5PC100_CLKREG_OTHER(0x100) -#define S5PC100_GEN_STATUS S5PC100_CLKREG_OTHER(0x104) -#define S5PC100_MEM_SYS_CFG S5PC100_CLKREG_OTHER(0x200) -#define S5PC100_CAM_MUX_SEL S5PC100_CLKREG_OTHER(0x300) -#define S5PC100_MIXER_OUT_SEL S5PC100_CLKREG_OTHER(0x304) -#define S5PC100_LPMP_MODE_SEL S5PC100_CLKREG_OTHER(0x308) -#define S5PC100_MIPI_PHY_CON0 S5PC100_CLKREG_OTHER(0x400) -#define S5PC100_MIPI_PHY_CON1 S5PC100_CLKREG_OTHER(0x414) -#define S5PC100_HDMI_PHY_CON0 S5PC100_CLKREG_OTHER(0x420) - -#define S5PC100_SWRESET_RESETVAL 0xc100 -#define S5PC100_OTHER_SYS_INT 24 -#define S5PC100_OTHER_STA_TYPE 23 -#define STA_TYPE_EXPON 0 -#define STA_TYPE_SFR 1 - -#define S5PC100_SLEEP_CFG_OSC_EN 0 - -/* OTHERS Resgister */ -#define S5PC100_OTHERS_USB_SIG_MASK (1 << 16) -#define S5PC100_OTHERS_MIPI_DPHY_EN (1 << 28) - -/* MIPI D-PHY Control Register 0 */ -#define S5PC100_MIPI_PHY_CON0_M_RESETN (1 << 1) -#define S5PC100_MIPI_PHY_CON0_S_RESETN (1 << 0) - -#endif /* _PLAT_REGS_CLOCK_H */ diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h deleted file mode 100644 index 02ffa491b53a..000000000000 --- a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h +++ /dev/null @@ -1,84 +0,0 @@ -/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h - * - * Copyright 2009 Samsung Electronics Co. - * Jongse Won <jongse.won@samsung.com> - * - * S5PC1XX clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARM_REGS_PWR -#define __ASM_ARM_REGS_PWR __FILE__ - -#define S5PC1XX_PWRREG(x) (S5PC1XX_VA_PWR + (x)) - -/* s5pc100 (0xE0108000) register for power management */ -#define S5PC100_PWR_CFG S5PC1XX_PWRREG(0x0) -#define S5PC100_EINT_WAKEUP_MASK S5PC1XX_PWRREG(0x4) -#define S5PC100_NORMAL_CFG S5PC1XX_PWRREG(0x10) -#define S5PC100_STOP_CFG S5PC1XX_PWRREG(0x14) -#define S5PC100_SLEEP_CFG S5PC1XX_PWRREG(0x18) -#define S5PC100_STOP_MEM_CFG S5PC1XX_PWRREG(0x1C) -#define S5PC100_OSC_FREQ S5PC1XX_PWRREG(0x100) -#define S5PC100_OSC_STABLE S5PC1XX_PWRREG(0x104) -#define S5PC100_PWR_STABLE S5PC1XX_PWRREG(0x108) -#define S5PC100_MTC_STABLE S5PC1XX_PWRREG(0x110) -#define S5PC100_CLAMP_STABLE S5PC1XX_PWRREG(0x114) -#define S5PC100_OTHERS S5PC1XX_PWRREG(0x200) -#define S5PC100_RST_STAT S5PC1XX_PWRREG(0x300) -#define S5PC100_WAKEUP_STAT S5PC1XX_PWRREG(0x304) -#define S5PC100_BLK_PWR_STAT S5PC1XX_PWRREG(0x308) -#define S5PC100_INFORM0 S5PC1XX_PWRREG(0x400) -#define S5PC100_INFORM1 S5PC1XX_PWRREG(0x404) -#define S5PC100_INFORM2 S5PC1XX_PWRREG(0x408) -#define S5PC100_INFORM3 S5PC1XX_PWRREG(0x40C) -#define S5PC100_INFORM4 S5PC1XX_PWRREG(0x410) -#define S5PC100_INFORM5 S5PC1XX_PWRREG(0x414) -#define S5PC100_INFORM6 S5PC1XX_PWRREG(0x418) -#define S5PC100_INFORM7 S5PC1XX_PWRREG(0x41C) -#define S5PC100_DCGIDX_MAP0 S5PC1XX_PWRREG(0x500) -#define S5PC100_DCGIDX_MAP1 S5PC1XX_PWRREG(0x504) -#define S5PC100_DCGIDX_MAP2 S5PC1XX_PWRREG(0x508) -#define S5PC100_DCGPERF_MAP0 S5PC1XX_PWRREG(0x50C) -#define S5PC100_DCGPERF_MAP1 S5PC1XX_PWRREG(0x510) -#define S5PC100_DVCIDX_MAP S5PC1XX_PWRREG(0x514) -#define S5PC100_FREQ_CPU S5PC1XX_PWRREG(0x518) -#define S5PC100_FREQ_DPM S5PC1XX_PWRREG(0x51C) -#define S5PC100_DVSEMCLK_EN S5PC1XX_PWRREG(0x520) -#define S5PC100_APLL_CON_L8 S5PC1XX_PWRREG(0x600) -#define S5PC100_APLL_CON_L7 S5PC1XX_PWRREG(0x604) -#define S5PC100_APLL_CON_L6 S5PC1XX_PWRREG(0x608) -#define S5PC100_APLL_CON_L5 S5PC1XX_PWRREG(0x60C) -#define S5PC100_APLL_CON_L4 S5PC1XX_PWRREG(0x610) -#define S5PC100_APLL_CON_L3 S5PC1XX_PWRREG(0x614) -#define S5PC100_APLL_CON_L2 S5PC1XX_PWRREG(0x618) -#define S5PC100_APLL_CON_L1 S5PC1XX_PWRREG(0x61C) -#define S5PC100_IEM_CONTROL S5PC1XX_PWRREG(0x620) -#define S5PC100_CLKDIV_IEM_L8 S5PC1XX_PWRREG(0x700) -#define S5PC100_CLKDIV_IEM_L7 S5PC1XX_PWRREG(0x704) -#define S5PC100_CLKDIV_IEM_L6 S5PC1XX_PWRREG(0x708) -#define S5PC100_CLKDIV_IEM_L5 S5PC1XX_PWRREG(0x70C) -#define S5PC100_CLKDIV_IEM_L4 S5PC1XX_PWRREG(0x710) -#define S5PC100_CLKDIV_IEM_L3 S5PC1XX_PWRREG(0x714) -#define S5PC100_CLKDIV_IEM_L2 S5PC1XX_PWRREG(0x718) -#define S5PC100_CLKDIV_IEM_L1 S5PC1XX_PWRREG(0x71C) -#define S5PC100_IEM_HPMCLK_DIV S5PC1XX_PWRREG(0x724) - -/* PWR_CFG */ -#define S5PC100_PWRCFG_CFG_DEEP_IDLE (1 << 31) -#define S5PC100_PWRCFG_CFG_WFI_MASK (3 << 5) -#define S5PC100_PWRCFG_CFG_WFI_IDLE (0 << 5) -#define S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE (1 << 5) -#define S5PC100_PWRCFG_CFG_WFI_STOP (2 << 5) -#define S5PC100_PWRCFG_CFG_WFI_SLEEP (3 << 5) - -/* SLEEP_CFG */ -#define S5PC100_SLEEP_OSC_EN_SLEEP (1 << 0) - -/* OTHERS */ -#define S5PC100_PMU_INT_DISABLE (1 << 24) - -#endif /* __ASM_ARM_REGS_PWR */ diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h deleted file mode 100644 index 2531f34a56f3..000000000000 --- a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h +++ /dev/null @@ -1,64 +0,0 @@ -/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * Header file for s5pc100 cpu support - * - * Based on plat-s3c64xx/include/plat/s3c6400.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5PC100 related SoCs */ -extern int s5pc100_init(void); -extern void s5pc100_map_io(void); -extern void s5pc100_init_clocks(int xtal); -extern int s5pc100_register_baseclocks(unsigned long xtal); -extern void s5pc100_init_irq(void); -extern void s5pc100_init_io(struct map_desc *mach_desc, int size); -extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s5pc100_register_clocks(void); -extern void s5pc100_setup_clocks(void); -extern struct sysdev_class s5pc100_sysclass; - -#define s5pc100_init_uarts s5pc100_common_init_uarts - -/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */ -extern void s5pc1xx_init_irq(u32 *vic_valid, int num); -extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size); - -/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */ -extern struct clk clk_hpll; -extern struct clk clk_hd0; -extern struct clk clk_pd0; -extern struct clk clk_54m; -extern void s5pc1xx_register_clocks(void); -extern int s5pc100_sclk0_ctrl(struct clk *clk, int enable); -extern int s5pc100_sclk1_ctrl(struct clk *clk, int enable); - -/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */ -extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[]; -extern struct platform_device s3c_device_g2d; -extern struct platform_device s3c_device_g3d; -extern struct platform_device s3c_device_vpp; -extern struct platform_device s3c_device_tvenc; -extern struct platform_device s3c_device_tvscaler; -extern struct platform_device s3c_device_rotator; -extern struct platform_device s3c_device_jpeg; -extern struct platform_device s3c_device_onenand; -extern struct platform_device s3c_device_usb_otghcd; -extern struct platform_device s3c_device_keypad; -extern struct platform_device s3c_device_ts; -extern struct platform_device s3c_device_g3d; -extern struct platform_device s3c_device_smc911x; -extern struct platform_device s3c_device_fimc0; -extern struct platform_device s3c_device_fimc1; -extern struct platform_device s3c_device_mfc; -extern struct platform_device s3c_device_ac97; -extern struct platform_device s3c_device_fimc0; -extern struct platform_device s3c_device_fimc1; -extern struct platform_device s3c_device_fimc2; - diff --git a/arch/arm/plat-s5pc1xx/irq-eint.c b/arch/arm/plat-s5pc1xx/irq-eint.c deleted file mode 100644 index 373122f57d56..000000000000 --- a/arch/arm/plat-s5pc1xx/irq-eint.c +++ /dev/null @@ -1,281 +0,0 @@ -/* - * linux/arch/arm/plat-s5pc1xx/irq-eint.c - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * Kyungin Park <kyungmin.park@samsung.com> - * - * Based on plat-s3c64xx/irq-eint.c - * - * S5PC1XX - Interrupt handling for IRQ_EINT(x) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/sysdev.h> -#include <linux/pm.h> -#include <linux/gpio.h> - -#include <asm/hardware/vic.h> - -#include <mach/map.h> - -#include <plat/gpio-cfg.h> -#include <plat/gpio-ext.h> -#include <plat/pm.h> -#include <plat/regs-gpio.h> -#include <plat/regs-irqtype.h> - -/* - * bank is a group of external interrupt - * bank0 means EINT0 ... EINT7 - * bank1 means EINT8 ... EINT15 - * bank2 means EINT16 ... EINT23 - * bank3 means EINT24 ... EINT31 - */ - -static inline int s3c_get_eint(unsigned int irq) -{ - int real; - - if (irq < IRQ_EINT16_31) - real = (irq - IRQ_EINT0); - else - real = (irq - S3C_IRQ_EINT_BASE) + IRQ_EINT16_31 - IRQ_EINT0; - - return real; -} - -static inline int s3c_get_bank(unsigned int irq) -{ - return s3c_get_eint(irq) >> 3; -} - -static inline int s3c_eint_to_bit(unsigned int irq) -{ - int real, bit; - - real = s3c_get_eint(irq); - bit = 1 << (real & (8 - 1)); - - return bit; -} - -static inline void s3c_irq_eint_mask(unsigned int irq) -{ - u32 mask; - u32 bank = s3c_get_bank(irq); - - mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank)); - mask |= s3c_eint_to_bit(irq); - __raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank)); -} - -static void s3c_irq_eint_unmask(unsigned int irq) -{ - u32 mask; - u32 bank = s3c_get_bank(irq); - - mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank)); - mask &= ~(s3c_eint_to_bit(irq)); - __raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank)); -} - -static inline void s3c_irq_eint_ack(unsigned int irq) -{ - u32 bank = s3c_get_bank(irq); - - __raw_writel(s3c_eint_to_bit(irq), S5PC1XX_WKUP_INT_PEND(bank)); -} - -static void s3c_irq_eint_maskack(unsigned int irq) -{ - /* compiler should in-line these */ - s3c_irq_eint_mask(irq); - s3c_irq_eint_ack(irq); -} - -static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) -{ - u32 bank = s3c_get_bank(irq); - int real = s3c_get_eint(irq); - int gpio, shift, sfn; - u32 ctrl, con = 0; - - switch (type) { - case IRQ_TYPE_NONE: - printk(KERN_WARNING "No edge setting!\n"); - break; - - case IRQ_TYPE_EDGE_RISING: - con = S5PC1XX_WKUP_INT_RISEEDGE; - break; - - case IRQ_TYPE_EDGE_FALLING: - con = S5PC1XX_WKUP_INT_FALLEDGE; - break; - - case IRQ_TYPE_EDGE_BOTH: - con = S5PC1XX_WKUP_INT_BOTHEDGE; - break; - - case IRQ_TYPE_LEVEL_LOW: - con = S5PC1XX_WKUP_INT_LOWLEV; - break; - - case IRQ_TYPE_LEVEL_HIGH: - con = S5PC1XX_WKUP_INT_HILEV; - break; - - default: - printk(KERN_ERR "No such irq type %d", type); - return -EINVAL; - } - - gpio = real & (8 - 1); - shift = gpio << 2; - - ctrl = __raw_readl(S5PC1XX_WKUP_INT_CON(bank)); - ctrl &= ~(0x7 << shift); - ctrl |= con << shift; - __raw_writel(ctrl, S5PC1XX_WKUP_INT_CON(bank)); - - switch (real) { - case 0 ... 7: - gpio = S5PC100_GPH0(gpio); - break; - case 8 ... 15: - gpio = S5PC100_GPH1(gpio); - break; - case 16 ... 23: - gpio = S5PC100_GPH2(gpio); - break; - case 24 ... 31: - gpio = S5PC100_GPH3(gpio); - break; - default: - return -EINVAL; - } - - sfn = S3C_GPIO_SFN(0x2); - s3c_gpio_cfgpin(gpio, sfn); - - return 0; -} - -static struct irq_chip s3c_irq_eint = { - .name = "EINT", - .mask = s3c_irq_eint_mask, - .unmask = s3c_irq_eint_unmask, - .mask_ack = s3c_irq_eint_maskack, - .ack = s3c_irq_eint_ack, - .set_type = s3c_irq_eint_set_type, - .set_wake = s3c_irqext_wake, -}; - -/* s3c_irq_demux_eint - * - * This function demuxes the IRQ from external interrupts, - * from IRQ_EINT(16) to IRQ_EINT(31). It is designed to be inlined into - * the specific handlers s3c_irq_demux_eintX_Y. - */ -static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end) -{ - u32 status = __raw_readl(S5PC1XX_WKUP_INT_PEND((start >> 3))); - u32 mask = __raw_readl(S5PC1XX_WKUP_INT_MASK((start >> 3))); - unsigned int irq; - - status &= ~mask; - status &= (1 << (end - start + 1)) - 1; - - for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) { - if (status & 1) - generic_handle_irq(irq); - - status >>= 1; - } -} - -static void s3c_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_eint(16, 23); - s3c_irq_demux_eint(24, 31); -} - -/* - * Handle EINT0 ... EINT15 at VIC directly - */ -static void s3c_irq_vic_eint_mask(unsigned int irq) -{ - void __iomem *base = get_irq_chip_data(irq); - unsigned int real; - - s3c_irq_eint_mask(irq); - real = s3c_get_eint(irq); - writel(1 << real, base + VIC_INT_ENABLE_CLEAR); -} - -static void s3c_irq_vic_eint_unmask(unsigned int irq) -{ - void __iomem *base = get_irq_chip_data(irq); - unsigned int real; - - s3c_irq_eint_unmask(irq); - real = s3c_get_eint(irq); - writel(1 << real, base + VIC_INT_ENABLE); -} - -static inline void s3c_irq_vic_eint_ack(unsigned int irq) -{ - u32 bit; - u32 bank = s3c_get_bank(irq); - - bit = s3c_eint_to_bit(irq); - __raw_writel(bit, S5PC1XX_WKUP_INT_PEND(bank)); -} - -static void s3c_irq_vic_eint_maskack(unsigned int irq) -{ - /* compiler should in-line these */ - s3c_irq_vic_eint_mask(irq); - s3c_irq_vic_eint_ack(irq); -} - -static struct irq_chip s3c_irq_vic_eint = { - .name = "EINT", - .mask = s3c_irq_vic_eint_mask, - .unmask = s3c_irq_vic_eint_unmask, - .mask_ack = s3c_irq_vic_eint_maskack, - .ack = s3c_irq_vic_eint_ack, - .set_type = s3c_irq_eint_set_type, - .set_wake = s3c_irqext_wake, -}; - -static int __init s5pc1xx_init_irq_eint(void) -{ - int irq; - - for (irq = IRQ_EINT0; irq <= IRQ_EINT15; irq++) { - set_irq_chip(irq, &s3c_irq_vic_eint); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) { - set_irq_chip(irq, &s3c_irq_eint); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - set_irq_chained_handler(IRQ_EINT16_31, s3c_irq_demux_eint16_31); - - return 0; -} - -arch_initcall(s5pc1xx_init_irq_eint); diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c deleted file mode 100644 index bfc524827819..000000000000 --- a/arch/arm/plat-s5pc1xx/irq.c +++ /dev/null @@ -1,75 +0,0 @@ -/* arch/arm/plat-s5pc1xx/irq.c - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC1XX - Interrupt handling - * - * Based on plat-s3c64xx/irq.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> - -#include <asm/hardware/vic.h> - -#include <mach/map.h> -#include <plat/irq-vic-timer.h> -#include <plat/irq-uart.h> -#include <plat/cpu.h> - -/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3] - * are consecutive when looking up the interrupt in the demux routines. - */ -static struct s3c_uart_irq uart_irqs[] = { - [0] = { - .regs = (void *)S3C_VA_UART0, - .base_irq = IRQ_S3CUART_BASE0, - .parent_irq = IRQ_UART0, - }, - [1] = { - .regs = (void *)S3C_VA_UART1, - .base_irq = IRQ_S3CUART_BASE1, - .parent_irq = IRQ_UART1, - }, - [2] = { - .regs = (void *)S3C_VA_UART2, - .base_irq = IRQ_S3CUART_BASE2, - .parent_irq = IRQ_UART2, - }, - [3] = { - .regs = (void *)S3C_VA_UART3, - .base_irq = IRQ_S3CUART_BASE3, - .parent_irq = IRQ_UART3, - }, -}; - -void __init s5pc1xx_init_irq(u32 *vic_valid, int num) -{ - int i; - - printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); - - /* initialise the pair of VICs */ - for (i = 0; i < num; i++) - vic_init((void *)S5PC1XX_VA_VIC(i), S3C_IRQ(i * S3C_IRQ_OFFSET), - vic_valid[i], 0); - - /* add the timer sub-irqs */ - - s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0); - s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1); - s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2); - s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3); - s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4); - - s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs)); -} - - diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c deleted file mode 100644 index 2bf6c57a96a2..000000000000 --- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c +++ /dev/null @@ -1,876 +0,0 @@ -/* linux/arch/arm/plat-s5pc1xx/s5pc100-clock.c - * - * Copyright 2009 Samsung Electronics, Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC100 based common clock support - * - * Based on plat-s3c64xx/s3c6400-clock.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/sysdev.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> - -#include <plat/cpu-freq.h> - -#include <plat/regs-clock.h> -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/devs.h> -#include <plat/s5pc100.h> - -/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call - * ext_xtal_mux for want of an actual name from the manual. -*/ - -static struct clk clk_ext_xtal_mux = { - .name = "ext_xtal", - .id = -1, -}; - -#define clk_fin_apll clk_ext_xtal_mux -#define clk_fin_mpll clk_ext_xtal_mux -#define clk_fin_epll clk_ext_xtal_mux -#define clk_fin_hpll clk_ext_xtal_mux - -#define clk_fout_mpll clk_mpll -#define clk_vclk_54m clk_54m - -/* APLL */ -static struct clk clk_fout_apll = { - .name = "fout_apll", - .id = -1, - .rate = 27000000, -}; - -static struct clk *clk_src_apll_list[] = { - [0] = &clk_fin_apll, - [1] = &clk_fout_apll, -}; - -static struct clksrc_sources clk_src_apll = { - .sources = clk_src_apll_list, - .nr_sources = ARRAY_SIZE(clk_src_apll_list), -}; - -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - .id = -1, - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 0, .size = 1, }, -}; - -static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned int ratio; - - ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_APLL_MASK; - ratio >>= S5PC100_CLKDIV0_APLL_SHIFT; - - return rate / (ratio + 1); -} - -static struct clk clk_dout_apll = { - .name = "dout_apll", - .id = -1, - .parent = &clk_mout_apll.clk, - .ops = &(struct clk_ops) { - .get_rate = s5pc100_clk_dout_apll_get_rate, - }, -}; - -static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned int ratio; - - ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_ARM_MASK; - ratio >>= S5PC100_CLKDIV0_ARM_SHIFT; - - return rate / (ratio + 1); -} - -static unsigned long s5pc100_clk_arm_round_rate(struct clk *clk, - unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - u32 div; - - if (parent < rate) - return rate; - - div = (parent / rate) - 1; - if (div > S5PC100_CLKDIV0_ARM_MASK) - div = S5PC100_CLKDIV0_ARM_MASK; - - return parent / (div + 1); -} - -static int s5pc100_clk_arm_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - u32 div; - u32 val; - - if (rate < parent / (S5PC100_CLKDIV0_ARM_MASK + 1)) - return -EINVAL; - - rate = clk_round_rate(clk, rate); - div = clk_get_rate(clk->parent) / rate; - - val = __raw_readl(S5PC100_CLKDIV0); - val &= S5PC100_CLKDIV0_ARM_MASK; - val |= (div - 1); - __raw_writel(val, S5PC100_CLKDIV0); - - return 0; -} - -static struct clk clk_arm = { - .name = "armclk", - .id = -1, - .parent = &clk_dout_apll, - .ops = &(struct clk_ops) { - .get_rate = s5pc100_clk_arm_get_rate, - .set_rate = s5pc100_clk_arm_set_rate, - .round_rate = s5pc100_clk_arm_round_rate, - }, -}; - -static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned int ratio; - - ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_D0_MASK; - ratio >>= S5PC100_CLKDIV0_D0_SHIFT; - - return rate / (ratio + 1); -} - -static struct clk clk_dout_d0_bus = { - .name = "dout_d0_bus", - .id = -1, - .parent = &clk_arm, - .ops = &(struct clk_ops) { - .get_rate = s5pc100_clk_dout_d0_bus_get_rate, - }, -}; - -static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned int ratio; - - ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_PCLKD0_MASK; - ratio >>= S5PC100_CLKDIV0_PCLKD0_SHIFT; - - return rate / (ratio + 1); -} - -static struct clk clk_dout_pclkd0 = { - .name = "dout_pclkd0", - .id = -1, - .parent = &clk_dout_d0_bus, - .ops = &(struct clk_ops) { - .get_rate = s5pc100_clk_dout_pclkd0_get_rate, - }, -}; - -static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned int ratio; - - ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_APLL2_MASK; - ratio >>= S5PC100_CLKDIV1_APLL2_SHIFT; - - return rate / (ratio + 1); -} - -static struct clk clk_dout_apll2 = { - .name = "dout_apll2", - .id = -1, - .parent = &clk_mout_apll.clk, - .ops = &(struct clk_ops) { - .get_rate = s5pc100_clk_dout_apll2_get_rate, - }, -}; - -/* MPLL */ -static struct clk *clk_src_mpll_list[] = { - [0] = &clk_fin_mpll, - [1] = &clk_fout_mpll, -}; - -static struct clksrc_sources clk_src_mpll = { - .sources = clk_src_mpll_list, - .nr_sources = ARRAY_SIZE(clk_src_mpll_list), -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - .id = -1, - }, - .sources = &clk_src_mpll, - .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 4, .size = 1, }, -}; - -static struct clk *clkset_am_list[] = { - [0] = &clk_mout_mpll.clk, - [1] = &clk_dout_apll2, -}; - -static struct clksrc_sources clk_src_am = { - .sources = clkset_am_list, - .nr_sources = ARRAY_SIZE(clkset_am_list), -}; - -static struct clksrc_clk clk_mout_am = { - .clk = { - .name = "mout_am", - .id = -1, - }, - .sources = &clk_src_am, - .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 16, .size = 1, }, -}; - -static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned int ratio; - - printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - - ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_D1_MASK; - ratio >>= S5PC100_CLKDIV1_D1_SHIFT; - - return rate / (ratio + 1); -} - -static struct clk clk_dout_d1_bus = { - .name = "dout_d1_bus", - .id = -1, - .parent = &clk_mout_am.clk, - .ops = &(struct clk_ops) { - .get_rate = s5pc100_clk_dout_d1_bus_get_rate, - }, -}; - -static struct clk *clkset_onenand_list[] = { - [0] = &clk_dout_d0_bus, - [1] = &clk_dout_d1_bus, -}; - -static struct clksrc_sources clk_src_onenand = { - .sources = clkset_onenand_list, - .nr_sources = ARRAY_SIZE(clkset_onenand_list), -}; - -static struct clksrc_clk clk_mout_onenand = { - .clk = { - .name = "mout_onenand", - .id = -1, - }, - .sources = &clk_src_onenand, - .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 24, .size = 1, }, -}; - -static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned int ratio; - - printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - - ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_PCLKD1_MASK; - ratio >>= S5PC100_CLKDIV1_PCLKD1_SHIFT; - - return rate / (ratio + 1); -} - -static struct clk clk_dout_pclkd1 = { - .name = "dout_pclkd1", - .id = -1, - .parent = &clk_dout_d1_bus, - .ops = &(struct clk_ops) { - .get_rate = s5pc100_clk_dout_pclkd1_get_rate, - }, -}; - -static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned int ratio; - - printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - - ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL2_MASK; - ratio >>= S5PC100_CLKDIV1_MPLL2_SHIFT; - - return rate / (ratio + 1); -} - -static struct clk clk_dout_mpll2 = { - .name = "dout_mpll2", - .id = -1, - .parent = &clk_mout_am.clk, - .ops = &(struct clk_ops) { - .get_rate = s5pc100_clk_dout_mpll2_get_rate, - }, -}; - -static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned int ratio; - - printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - - ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_CAM_MASK; - ratio >>= S5PC100_CLKDIV1_CAM_SHIFT; - - return rate / (ratio + 1); -} - -static struct clk clk_dout_cam = { - .name = "dout_cam", - .id = -1, - .parent = &clk_dout_mpll2, - .ops = &(struct clk_ops) { - .get_rate = s5pc100_clk_dout_cam_get_rate, - }, -}; - -static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned int ratio; - - printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - - ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL_MASK; - ratio >>= S5PC100_CLKDIV1_MPLL_SHIFT; - - return rate / (ratio + 1); -} - -static struct clk clk_dout_mpll = { - .name = "dout_mpll", - .id = -1, - .parent = &clk_mout_am.clk, - .ops = &(struct clk_ops) { - .get_rate = s5pc100_clk_dout_mpll_get_rate, - }, -}; - -/* EPLL */ -static struct clk clk_fout_epll = { - .name = "fout_epll", - .id = -1, -}; - -static struct clk *clk_src_epll_list[] = { - [0] = &clk_fin_epll, - [1] = &clk_fout_epll, -}; - -static struct clksrc_sources clk_src_epll = { - .sources = clk_src_epll_list, - .nr_sources = ARRAY_SIZE(clk_src_epll_list), -}; - -static struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - .id = -1, - }, - .sources = &clk_src_epll, - .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 8, .size = 1, }, -}; - -/* HPLL */ -static struct clk clk_fout_hpll = { - .name = "fout_hpll", - .id = -1, -}; - -static struct clk *clk_src_hpll_list[] = { - [0] = &clk_27m, - [1] = &clk_fout_hpll, -}; - -static struct clksrc_sources clk_src_hpll = { - .sources = clk_src_hpll_list, - .nr_sources = ARRAY_SIZE(clk_src_hpll_list), -}; - -static struct clksrc_clk clk_mout_hpll = { - .clk = { - .name = "mout_hpll", - .id = -1, - }, - .sources = &clk_src_hpll, - .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 12, .size = 1, }, -}; - -/* Peripherals */ -/* - * The peripheral clocks are all controlled via clocksource followed - * by an optional divider and gate stage. We currently roll this into - * one clock which hides the intermediate clock from the mux. - * - * Note, the JPEG clock can only be an even divider... - * - * The scaler and LCD clocks depend on the S5PC100 version, and also - * have a common parent divisor so are not included here. - */ - -static struct clk clk_iis_cd0 = { - .name = "iis_cdclk0", - .id = -1, -}; - -static struct clk clk_iis_cd1 = { - .name = "iis_cdclk1", - .id = -1, -}; - -static struct clk clk_iis_cd2 = { - .name = "iis_cdclk2", - .id = -1, -}; - -static struct clk clk_pcm_cd0 = { - .name = "pcm_cdclk0", - .id = -1, -}; - -static struct clk clk_pcm_cd1 = { - .name = "pcm_cdclk1", - .id = -1, -}; - -static struct clk *clkset_audio0_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_fin_epll, - &clk_iis_cd0, - &clk_pcm_cd0, - &clk_mout_hpll.clk, -}; - -static struct clksrc_sources clkset_audio0 = { - .sources = clkset_audio0_list, - .nr_sources = ARRAY_SIZE(clkset_audio0_list), -}; - -static struct clk *clkset_spi_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll2, - &clk_fin_epll, - &clk_mout_hpll.clk, -}; - -static struct clksrc_sources clkset_spi = { - .sources = clkset_spi_list, - .nr_sources = ARRAY_SIZE(clkset_spi_list), -}; - -static struct clk *clkset_uart_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, -}; - -static struct clksrc_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), -}; - -static struct clk *clkset_audio1_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_fin_epll, - &clk_iis_cd1, - &clk_pcm_cd1, - &clk_mout_hpll.clk, -}; - -static struct clksrc_sources clkset_audio1 = { - .sources = clkset_audio1_list, - .nr_sources = ARRAY_SIZE(clkset_audio1_list), -}; - -static struct clk *clkset_audio2_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_fin_epll, - &clk_iis_cd2, - &clk_mout_hpll.clk, -}; - -static struct clksrc_sources clkset_audio2 = { - .sources = clkset_audio2_list, - .nr_sources = ARRAY_SIZE(clkset_audio2_list), -}; - -static struct clksrc_clk clksrc_audio[] = { - { - .clk = { - .name = "audio-bus", - .id = 0, - .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO0, - .enable = s5pc100_sclk1_ctrl, - }, - .sources = &clkset_audio0, - .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 12, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 12, .size = 3, }, - }, { - .clk = { - .name = "audio-bus", - .id = 1, - .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO1, - .enable = s5pc100_sclk1_ctrl, - }, - .sources = &clkset_audio1, - .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 16, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 16, .size = 3, }, - }, { - .clk = { - .name = "audio-bus", - .id = 2, - .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO2, - .enable = s5pc100_sclk1_ctrl, - }, - .sources = &clkset_audio2, - .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 20, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 20, .size = 3, }, - }, -}; - -static struct clk *clkset_spdif_list[] = { - &clksrc_audio[0].clk, - &clksrc_audio[1].clk, - &clksrc_audio[2].clk, -}; - -static struct clksrc_sources clkset_spdif = { - .sources = clkset_spdif_list, - .nr_sources = ARRAY_SIZE(clkset_spdif_list), -}; - -static struct clk *clkset_lcd_fimc_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_mout_hpll.clk, - &clk_vclk_54m, -}; - -static struct clksrc_sources clkset_lcd_fimc = { - .sources = clkset_lcd_fimc_list, - .nr_sources = ARRAY_SIZE(clkset_lcd_fimc_list), -}; - -static struct clk *clkset_mmc_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_fin_epll, - &clk_mout_hpll.clk , -}; - -static struct clksrc_sources clkset_mmc = { - .sources = clkset_mmc_list, - .nr_sources = ARRAY_SIZE(clkset_mmc_list), -}; - -static struct clk *clkset_usbhost_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_mout_hpll.clk, - &clk_48m, -}; - -static struct clksrc_sources clkset_usbhost = { - .sources = clkset_usbhost_list, - .nr_sources = ARRAY_SIZE(clkset_usbhost_list), -}; - -static struct clksrc_clk clksrc_clks[] = { - { - .clk = { - .name = "spi_bus", - .id = 0, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0, - .enable = s5pc100_sclk0_ctrl, - - }, - .sources = &clkset_spi, - .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 4, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 4, .size = 2, }, - }, { - .clk = { - .name = "spi_bus", - .id = 1, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1, - .enable = s5pc100_sclk0_ctrl, - }, - .sources = &clkset_spi, - .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 8, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 8, .size = 2, }, - }, { - .clk = { - .name = "spi_bus", - .id = 2, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2, - .enable = s5pc100_sclk0_ctrl, - }, - .sources = &clkset_spi, - .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 12, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 12, .size = 2, }, - }, { - .clk = { - .name = "uclk1", - .id = -1, - .ctrlbit = S5PC100_CLKGATE_SCLK0_UART, - .enable = s5pc100_sclk0_ctrl, - }, - .sources = &clkset_uart, - .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 0, .size = 3, }, - .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 0, .size = 1, }, - }, { - .clk = { - .name = "spdif", - .id = -1, - }, - .sources = &clkset_spdif, - .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 24, .size = 2, }, - }, { - .clk = { - .name = "lcd", - .id = -1, - .ctrlbit = S5PC100_CLKGATE_SCLK1_LCD, - .enable = s5pc100_sclk1_ctrl, - }, - .sources = &clkset_lcd_fimc, - .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 12, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 12, .size = 2, }, - }, { - .clk = { - .name = "fimc", - .id = 0, - .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC0, - .enable = s5pc100_sclk1_ctrl, - }, - .sources = &clkset_lcd_fimc, - .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 16, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 16, .size = 2, }, - }, { - .clk = { - .name = "fimc", - .id = 1, - .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC1, - .enable = s5pc100_sclk1_ctrl, - }, - .sources = &clkset_lcd_fimc, - .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 20, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 20, .size = 2, }, - }, { - .clk = { - .name = "fimc", - .id = 2, - .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC2, - .enable = s5pc100_sclk1_ctrl, - }, - .sources = &clkset_lcd_fimc, - .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 24, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 24, .size = 2, }, - }, { - .clk = { - .name = "mmc_bus", - .id = 0, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0, - .enable = s5pc100_sclk0_ctrl, - }, - .sources = &clkset_mmc, - .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 0, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 0, .size = 2, }, - }, { - .clk = { - .name = "mmc_bus", - .id = 1, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1, - .enable = s5pc100_sclk0_ctrl, - }, - .sources = &clkset_mmc, - .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 4, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 4, .size = 2, }, - }, { - .clk = { - .name = "mmc_bus", - .id = 2, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2, - .enable = s5pc100_sclk0_ctrl, - }, - .sources = &clkset_mmc, - .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 8, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 8, .size = 2, }, - }, { - .clk = { - .name = "usbhost", - .id = -1, - .ctrlbit = S5PC100_CLKGATE_SCLK0_USBHOST, - .enable = s5pc100_sclk0_ctrl, - }, - .sources = &clkset_usbhost, - .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 20, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 20, .size = 2, }, - } -}; - -/* Clock initialisation code */ - -static struct clksrc_clk *init_parents[] = { - &clk_mout_apll, - &clk_mout_mpll, - &clk_mout_am, - &clk_mout_onenand, - &clk_mout_epll, - &clk_mout_hpll, -}; - -#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) - -void __init_or_cpufreq s5pc100_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long xtal; - unsigned long armclk; - unsigned long hclkd0; - unsigned long hclk; - unsigned long pclkd0; - unsigned long pclk; - unsigned long apll, mpll, epll, hpll; - unsigned int ptr; - u32 clkdiv0, clkdiv1; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - clkdiv0 = __raw_readl(S5PC100_CLKDIV0); - clkdiv1 = __raw_readl(S5PC100_CLKDIV1); - - printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", __func__, clkdiv0, clkdiv1); - - xtal_clk = clk_get(NULL, "xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_APLL_CON)); - mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_MPLL_CON)); - epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_EPLL_CON)); - hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON)); - - printk(KERN_INFO "S5PC100: Apll=%ld.%03ld Mhz, Mpll=%ld.%03ld Mhz" - ", Epll=%ld.%03ld Mhz, Hpll=%ld.%03ld Mhz\n", - print_mhz(apll), print_mhz(mpll), - print_mhz(epll), print_mhz(hpll)); - - armclk = apll / GET_DIV(clkdiv0, S5PC100_CLKDIV0_APLL); - armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM); - hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0); - pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0); - hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1); - pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1); - - printk(KERN_INFO "S5PC100: ARMCLK=%ld.%03ld MHz, HCLKD0=%ld.%03ld MHz," - " PCLKD0=%ld.%03ld MHz\n, HCLK=%ld.%03ld MHz," - " PCLK=%ld.%03ld MHz\n", - print_mhz(armclk), print_mhz(hclkd0), - print_mhz(pclkd0), print_mhz(hclk), print_mhz(pclk)); - - clk_fout_apll.rate = apll; - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - clk_fout_hpll.rate = hpll; - - clk_h.rate = hclk; - clk_p.rate = pclk; - clk_f.rate = armclk; - - for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) - s3c_set_clksrc(init_parents[ptr], true); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrc_audio); ptr++) - s3c_set_clksrc(clksrc_audio + ptr, true); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++) - s3c_set_clksrc(clksrc_clks + ptr, true); -} - -static struct clk *clks[] __initdata = { - &clk_ext_xtal_mux, - &clk_dout_apll, - &clk_dout_d0_bus, - &clk_dout_pclkd0, - &clk_dout_apll2, - &clk_mout_apll.clk, - &clk_mout_mpll.clk, - &clk_mout_epll.clk, - &clk_mout_hpll.clk, - &clk_mout_am.clk, - &clk_dout_d1_bus, - &clk_mout_onenand.clk, - &clk_dout_pclkd1, - &clk_dout_mpll2, - &clk_dout_cam, - &clk_dout_mpll, - &clk_fout_epll, - &clk_iis_cd0, - &clk_iis_cd1, - &clk_iis_cd2, - &clk_pcm_cd0, - &clk_pcm_cd1, - &clk_arm, -}; - -void __init s5pc100_register_clocks(void) -{ - struct clk *clkp; - int ret; - int ptr; - - for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { - clkp = clks[ptr]; - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - s3c_register_clksrc(clksrc_audio, ARRAY_SIZE(clksrc_audio)); - s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks)); -} diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 229919e9744c..2753fb3e4f73 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -6,7 +6,7 @@ config PLAT_SAMSUNG bool - depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX + depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX select NO_IOPORT default y help @@ -170,6 +170,11 @@ config S3C_DEV_I2C1 help Compile in platform device definitions for I2C channel 1 +config S3C_DEV_I2C2 + bool + help + Compile in platform device definitions for I2C channel 2 + config S3C_DEV_FB bool help @@ -185,11 +190,22 @@ config S3C_DEV_USB_HSOTG help Compile in platform device definition for USB high-speed OtG +config S3C_DEV_WDT + bool + default y if ARCH_S3C2410 + help + Complie in platform device definition for Watchdog Timer + config S3C_DEV_NAND bool help Compile in platform device definition for NAND controller +config S3C_DEV_ONENAND + bool + help + Compile in platform device definition for OneNAND controller + config S3C_DEV_RTC bool help @@ -269,4 +285,12 @@ config SAMSUNG_PM_CHECK_CHUNKSIZE See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> +config SAMSUNG_WAKEMASK + bool + depends on PM + help + Compile support for wakeup-mask controls found on the S3C6400 + and above. This code allows a set of interrupt to wakeup-mask + mappings. See <plat/wakeup-mask.h> + endif diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 48288499a3b9..b1d82cc5e716 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -36,11 +36,14 @@ obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o obj-y += dev-i2c0.o obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o +obj-$(CONFIG_S3C_DEV_I2C2) += dev-i2c2.o obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o obj-y += dev-uart.o obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o +obj-$(CONFIG_S3C_DEV_WDT) += dev-wdt.o obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o +obj-$(CONFIG_S3C_DEV_ONENAND) += dev-onenand.o obj-$(CONFIG_S3C_DEV_RTC) += dev-rtc.o obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o @@ -58,6 +61,8 @@ obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += pm-gpio.o obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o +obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o + # PWM support obj-$(CONFIG_HAVE_PWM) += pwm.o diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index 210030d5cfe1..04d9521ddc9f 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -66,6 +66,7 @@ struct adc_device { struct s3c_adc_client *cur; struct s3c_adc_client *ts_pend; void __iomem *regs; + spinlock_t lock; unsigned int prescale; @@ -74,7 +75,7 @@ struct adc_device { static struct adc_device *adc_dev; -static LIST_HEAD(adc_pending); +static LIST_HEAD(adc_pending); /* protected by adc_device.lock */ #define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg) @@ -145,7 +146,7 @@ int s3c_adc_start(struct s3c_adc_client *client, if (client->is_ts && adc->ts_pend) return -EAGAIN; - local_irq_save(flags); + spin_lock_irqsave(&adc->lock, flags); client->channel = channel; client->nr_samples = nr_samples; @@ -157,7 +158,8 @@ int s3c_adc_start(struct s3c_adc_client *client, if (!adc->cur) s3c_adc_try(adc); - local_irq_restore(flags); + + spin_unlock_irqrestore(&adc->lock, flags); return 0; } @@ -237,6 +239,10 @@ EXPORT_SYMBOL_GPL(s3c_adc_register); void s3c_adc_release(struct s3c_adc_client *client) { + unsigned long flags; + + spin_lock_irqsave(&adc_dev->lock, flags); + /* We should really check that nothing is in progress. */ if (adc_dev->cur == client) adc_dev->cur = NULL; @@ -255,6 +261,8 @@ void s3c_adc_release(struct s3c_adc_client *client) if (adc_dev->cur == NULL) s3c_adc_try(adc_dev); + + spin_unlock_irqrestore(&adc_dev->lock, flags); kfree(client); } EXPORT_SYMBOL_GPL(s3c_adc_release); @@ -264,7 +272,6 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) struct adc_device *adc = pw; struct s3c_adc_client *client = adc->cur; enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data; - unsigned long flags; unsigned data0, data1; if (!client) { @@ -296,12 +303,12 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) client->select_cb(client, 1); s3c_adc_convert(adc); } else { - local_irq_save(flags); + spin_lock(&adc->lock); (client->select_cb)(client, 0); adc->cur = NULL; s3c_adc_try(adc); - local_irq_restore(flags); + spin_unlock(&adc->lock); } exit: @@ -326,6 +333,8 @@ static int s3c_adc_probe(struct platform_device *pdev) return -ENOMEM; } + spin_lock_init(&adc->lock); + adc->pdev = pdev; adc->prescale = S3C2410_ADCCON_PRSCVL(49); @@ -407,13 +416,17 @@ static int __devexit s3c_adc_remove(struct platform_device *pdev) static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state) { struct adc_device *adc = platform_get_drvdata(pdev); + unsigned long flags; u32 con; + spin_lock_irqsave(&adc->lock, flags); + con = readl(adc->regs + S3C2410_ADCCON); con |= S3C2410_ADCCON_STDBM; writel(con, adc->regs + S3C2410_ADCCON); disable_irq(adc->irq); + spin_unlock_irqrestore(&adc->lock, flags); clk_disable(adc->clk); return 0; @@ -422,6 +435,7 @@ static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state) static int s3c_adc_resume(struct platform_device *pdev) { struct adc_device *adc = platform_get_drvdata(pdev); + unsigned long flags; clk_enable(adc->clk); enable_irq(adc->irq); diff --git a/arch/arm/plat-samsung/dev-i2c2.c b/arch/arm/plat-samsung/dev-i2c2.c new file mode 100644 index 000000000000..07036dee09e7 --- /dev/null +++ b/arch/arm/plat-samsung/dev-i2c2.c @@ -0,0 +1,70 @@ +/* linux/arch/arm/plat-s3c/dev-i2c2.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S3C series device definition for i2c device 2 + * + * Based on plat-samsung/dev-i2c0.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/gfp.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/regs-iic.h> +#include <plat/iic.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +static struct resource s3c_i2c_resource[] = { + [0] = { + .start = S3C_PA_IIC2, + .end = S3C_PA_IIC2 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_CAN0, + .end = IRQ_CAN0, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_i2c2 = { + .name = "s3c2410-i2c", + .id = 2, + .num_resources = ARRAY_SIZE(s3c_i2c_resource), + .resource = s3c_i2c_resource, +}; + +static struct s3c2410_platform_i2c default_i2c_data2 __initdata = { + .flags = 0, + .bus_num = 2, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, +}; + +void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) + pd = &default_i2c_data2; + + npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + else if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c2_cfg_gpio; + + s3c_device_i2c2.dev.platform_data = npd; +} diff --git a/arch/arm/plat-samsung/dev-onenand.c b/arch/arm/plat-samsung/dev-onenand.c new file mode 100644 index 000000000000..45ec73287d8c --- /dev/null +++ b/arch/arm/plat-samsung/dev-onenand.c @@ -0,0 +1,55 @@ +/* + * linux/arch/arm/plat-samsung/dev-onenand.c + * + * Copyright (c) 2008-2010 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * S3C64XX/S5PC100 series device definition for OneNAND devices + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/onenand.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +static struct resource s3c_onenand_resources[] = { + [0] = { + .start = S3C_PA_ONENAND, + .end = S3C_PA_ONENAND + 0x400 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = S3C_PA_ONENAND_BUF, + .end = S3C_PA_ONENAND_BUF + S3C_SZ_ONENAND_BUF - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = IRQ_ONENAND, + .end = IRQ_ONENAND, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_onenand = { + .name = "samsung-onenand", + .id = 0, + .num_resources = ARRAY_SIZE(s3c_onenand_resources), + .resource = s3c_onenand_resources, +}; + +void s3c_onenand_set_platdata(struct onenand_platform_data *pdata) +{ + struct onenand_platform_data *pd; + + pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL); + if (!pd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + s3c_device_onenand.dev.platform_data = pd; +} diff --git a/arch/arm/plat-samsung/dev-wdt.c b/arch/arm/plat-samsung/dev-wdt.c new file mode 100644 index 000000000000..5efca87cddbd --- /dev/null +++ b/arch/arm/plat-samsung/dev-wdt.c @@ -0,0 +1,40 @@ +/* linux/arch/arm/plat-samsung/dev-wdt.c + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C series device definition for the watchdog timer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/devs.h> + +static struct resource s3c_wdt_resource[] = { + [0] = { + .start = S3C_PA_WDT, + .end = S3C_PA_WDT + SZ_1M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_WDT, + .end = IRQ_WDT, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device s3c_device_wdt = { + .name = "s3c2410-wdt", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_wdt_resource), + .resource = s3c_wdt_resource, +}; +EXPORT_SYMBOL(s3c_device_wdt); diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index ef69e56b2885..e6144e4b9118 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -45,6 +45,7 @@ extern struct platform_device s3c_device_lcd; extern struct platform_device s3c_device_wdt; extern struct platform_device s3c_device_i2c0; extern struct platform_device s3c_device_i2c1; +extern struct platform_device s3c_device_i2c2; extern struct platform_device s3c_device_rtc; extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_sdi; @@ -57,9 +58,20 @@ extern struct platform_device s3c_device_hsmmc2; extern struct platform_device s3c_device_spi0; extern struct platform_device s3c_device_spi1; +extern struct platform_device s5pc100_device_spi0; +extern struct platform_device s5pc100_device_spi1; +extern struct platform_device s5pc100_device_spi2; +extern struct platform_device s5pv210_device_spi0; +extern struct platform_device s5pv210_device_spi1; +extern struct platform_device s5p6440_device_spi0; +extern struct platform_device s5p6440_device_spi1; + extern struct platform_device s3c_device_hwmon; extern struct platform_device s3c_device_nand; +extern struct platform_device s3c_device_onenand; +extern struct platform_device s3c64xx_device_onenand1; +extern struct platform_device s5pc110_device_onenand; extern struct platform_device s3c_device_usbgadget; extern struct platform_device s3c_device_usb_hsotg; @@ -76,10 +88,18 @@ extern struct platform_device s5p6442_device_pcm0; extern struct platform_device s5p6442_device_pcm1; extern struct platform_device s5p6442_device_iis0; extern struct platform_device s5p6442_device_iis1; +extern struct platform_device s5p6442_device_spi; extern struct platform_device s5p6440_device_pcm; extern struct platform_device s5p6440_device_iis; +extern struct platform_device s5pc100_device_ac97; +extern struct platform_device s5pc100_device_pcm0; +extern struct platform_device s5pc100_device_pcm1; +extern struct platform_device s5pc100_device_iis0; +extern struct platform_device s5pc100_device_iis1; +extern struct platform_device s5pc100_device_iis2; + /* s3c2440 specific devices */ #ifdef CONFIG_CPU_S3C2440 diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index 1f85649d8c18..27d3b497b55b 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -84,4 +84,11 @@ extern void s3c64xx_fb_gpio_setup_24bpp(void); */ extern void s5pc100_fb_gpio_setup_24bpp(void); +/** + * s5pv210_fb_gpio_setup_24bpp() - S5PV210/S5PC110 setup function for 24bpp LCD + * + * Initialise the GPIO for an 24bpp LCD display on the RGB interface. + */ +extern void s5pv210_fb_gpio_setup_24bpp(void); + #endif /* __PLAT_S3C_FB_H */ diff --git a/arch/arm/plat-samsung/include/plat/iic-core.h b/arch/arm/plat-samsung/include/plat/iic-core.h index 36397ca20962..f182669b8e8e 100644 --- a/arch/arm/plat-samsung/include/plat/iic-core.h +++ b/arch/arm/plat-samsung/include/plat/iic-core.h @@ -32,4 +32,11 @@ static inline void s3c_i2c1_setname(char *name) #endif } +static inline void s3c_i2c2_setname(char *name) +{ +#ifdef CONFIG_S3C_DEV_I2C2 + s3c_device_i2c2.name = name; +#endif +} + #endif /* __ASM_ARCH_IIC_H */ diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h index 3083df00dee6..133308bf595d 100644 --- a/arch/arm/plat-samsung/include/plat/iic.h +++ b/arch/arm/plat-samsung/include/plat/iic.h @@ -54,9 +54,11 @@ struct s3c2410_platform_i2c { */ extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c); extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c); /* defined by architecture to configure gpio */ extern void s3c_i2c0_cfg_gpio(struct platform_device *dev); extern void s3c_i2c1_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c2_cfg_gpio(struct platform_device *dev); #endif /* __ASM_ARCH_IIC_H */ diff --git a/arch/arm/plat-samsung/include/plat/onenand-core.h b/arch/arm/plat-samsung/include/plat/onenand-core.h new file mode 100644 index 000000000000..7701cb7020c8 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/onenand-core.h @@ -0,0 +1,37 @@ +/* + * linux/arch/arm/plat-samsung/onenand-core.h + * + * Copyright (c) 2010 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * Marek Szyprowski <m.szyprowski@samsung.com> + * + * Samsung OneNAD Controller core functions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_ONENAND_CORE_H +#define __ASM_ARCH_ONENAND_CORE_H __FILE__ + +/* These functions are only for use with the core support code, such as + * the cpu specific initialisation code + */ + +/* re-define device name depending on support. */ +static inline void s3c_onenand_setname(char *name) +{ +#ifdef CONFIG_S3C_DEV_ONENAND + s3c_device_onenand.name = name; +#endif +} + +static inline void s3c64xx_onenand1_setname(char *name) +{ +#ifdef CONFIG_S3C64XX_DEV_ONENAND1 + s3c64xx_device_onenand1.name = name; +#endif +} + +#endif /* __ASM_ARCH_ONENAND_CORE_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-onenand.h b/arch/arm/plat-samsung/include/plat/regs-onenand.h new file mode 100644 index 000000000000..930ea8b88ed3 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-onenand.h @@ -0,0 +1,63 @@ +/* + * linux/arch/arm/plat-s3c/include/plat/regs-onenand.h + * + * Copyright (C) 2008-2010 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __SAMSUNG_ONENAND_H__ +#define __SAMSUNG_ONENAND_H__ + +#include <mach/hardware.h> + +/* + * OneNAND Controller + */ +#define MEM_CFG_OFFSET 0x0000 +#define BURST_LEN_OFFSET 0x0010 +#define MEM_RESET_OFFSET 0x0020 +#define INT_ERR_STAT_OFFSET 0x0030 +#define INT_ERR_MASK_OFFSET 0x0040 +#define INT_ERR_ACK_OFFSET 0x0050 +#define ECC_ERR_STAT_OFFSET 0x0060 +#define MANUFACT_ID_OFFSET 0x0070 +#define DEVICE_ID_OFFSET 0x0080 +#define DATA_BUF_SIZE_OFFSET 0x0090 +#define BOOT_BUF_SIZE_OFFSET 0x00A0 +#define BUF_AMOUNT_OFFSET 0x00B0 +#define TECH_OFFSET 0x00C0 +#define FBA_WIDTH_OFFSET 0x00D0 +#define FPA_WIDTH_OFFSET 0x00E0 +#define FSA_WIDTH_OFFSET 0x00F0 +#define TRANS_SPARE_OFFSET 0x0140 +#define DBS_DFS_WIDTH_OFFSET 0x0160 +#define INT_PIN_ENABLE_OFFSET 0x01A0 +#define ACC_CLOCK_OFFSET 0x01C0 +#define FLASH_VER_ID_OFFSET 0x01F0 +#define FLASH_AUX_CNTRL_OFFSET 0x0300 /* s3c64xx only */ + +#define ONENAND_MEM_RESET_HOT 0x3 +#define ONENAND_MEM_RESET_COLD 0x2 +#define ONENAND_MEM_RESET_WARM 0x1 + +#define CACHE_OP_ERR (1 << 13) +#define RST_CMP (1 << 12) +#define RDY_ACT (1 << 11) +#define INT_ACT (1 << 10) +#define UNSUP_CMD (1 << 9) +#define LOCKED_BLK (1 << 8) +#define BLK_RW_CMP (1 << 7) +#define ERS_CMP (1 << 6) +#define PGM_CMP (1 << 5) +#define LOAD_CMP (1 << 4) +#define ERS_FAIL (1 << 3) +#define PGM_FAIL (1 << 2) +#define INT_TO (1 << 1) +#define LD_FAIL_ECC_ERR (1 << 0) + +#define TSRF (1 << 0) + +#endif diff --git a/arch/arm/plat-samsung/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h index d5837cf8e402..65c190d142dd 100644 --- a/arch/arm/plat-samsung/include/plat/regs-rtc.h +++ b/arch/arm/plat-samsung/include/plat/regs-rtc.h @@ -20,6 +20,10 @@ #define S3C2410_RTCCON_CLKSEL (1<<1) #define S3C2410_RTCCON_CNTSEL (1<<2) #define S3C2410_RTCCON_CLKRST (1<<3) +#define S3C64XX_RTCCON_TICEN (1<<8) + +#define S3C64XX_RTCCON_TICMSK (0xF<<7) +#define S3C64XX_RTCCON_TICSHT (7) #define S3C2410_TICNT S3C2410_RTCREG(0x44) #define S3C2410_TICNT_ENABLE (1<<7) diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index d17724149315..e5aba8f95b79 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -63,5 +63,9 @@ struct s3c64xx_spi_info { * has some chips attached to it. */ extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); +extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); +extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); +extern void s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); +extern void s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); #endif /* __S3C64XX_PLAT_SPI_H */ diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 7d07cd7aa4f2..13f9fb20900a 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -75,6 +75,9 @@ extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w); extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w); extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w); +extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w); +extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w); +extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w); /* S3C6400 SDHCI setup */ @@ -218,4 +221,56 @@ static inline void s5pc100_default_sdhci1(void) { } static inline void s5pc100_default_sdhci2(void) { } #endif /* CONFIG_S5PC100_SETUP_SDHCI */ + +/* S5PC110 SDHCI setup */ +#ifdef CONFIG_S5PV210_SETUP_SDHCI +extern char *s5pv210_hsmmc_clksrcs[4]; + +extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card); + +#ifdef CONFIG_S3C_DEV_HSMMC +static inline void s5pv210_default_sdhci0(void) +{ + s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs; + s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio; + s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; +} +#else +static inline void s5pc100_default_sdhci0(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC */ + +#ifdef CONFIG_S3C_DEV_HSMMC1 +static inline void s5pv210_default_sdhci1(void) +{ + s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs; + s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio; + s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; +} +#else +static inline void s5pv210_default_sdhci1(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC1 */ + +#ifdef CONFIG_S3C_DEV_HSMMC2 +static inline void s5pv210_default_sdhci2(void) +{ + s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs; + s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio; + s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; +} +#else +static inline void s5pv210_default_sdhci2(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC2 */ + +#else +static inline void s5pv210_default_sdhci0(void) { } +static inline void s5pv210_default_sdhci1(void) { } +static inline void s5pv210_default_sdhci2(void) { } +#endif /* CONFIG_S5PC100_SETUP_SDHCI */ + + + + #endif /* __PLAT_S3C_SDHCI_H */ diff --git a/arch/arm/plat-samsung/include/plat/wakeup-mask.h b/arch/arm/plat-samsung/include/plat/wakeup-mask.h new file mode 100644 index 000000000000..43e4acd2e1c6 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/wakeup-mask.h @@ -0,0 +1,44 @@ +/* arch/arm/plat-samsung/include/plat/wakeup-mask.h + * + * Copyright 2010 Ben Dooks <ben-linux@fluff.org> + * + * Support for wakeup mask interrupts on newer SoCs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#ifndef __PLAT_WAKEUP_MASK_H +#define __PLAT_WAKEUP_MASK_H __file__ + +/* if no irq yet defined, but still want to mask */ +#define NO_WAKEUP_IRQ (0x90000000) + +/** + * struct samsung_wakeup_mask - wakeup mask information + * @irq: The interrupt associated with this wakeup. + * @bit: The bit, as a (1 << bitno) controlling this source. + */ +struct samsung_wakeup_mask { + unsigned int irq; + u32 bit; +}; + +/** + * samsung_sync_wakemask - sync wakeup mask information for pm + * @reg: The register that is used. + * @masks: The list of masks to use. + * @nr_masks: The number of entries pointed to buy @masks. + * + * Synchronise the wakeup mask information at suspend time from the list + * of interrupts and control bits in @masks. We do this at suspend time + * as overriding the relevant irq chips is harder and the register is only + * required to be correct before we enter sleep. + */ +extern void samsung_sync_wakemask(void __iomem *reg, + struct samsung_wakeup_mask *masks, + int nr_masks); + +#endif /* __PLAT_WAKEUP_MASK_H */ diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c index d50ab9d2af53..7df03f87fbfa 100644 --- a/arch/arm/plat-samsung/pm-gpio.c +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -331,8 +331,10 @@ void s3c_pm_save_gpios(void) for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) { ourchip = s3c_gpiolib_getchip(gpio_nr); - if (!ourchip) + if (!ourchip) { + gpio_nr++; continue; + } s3c_pm_save_gpio(ourchip); @@ -369,8 +371,10 @@ void s3c_pm_restore_gpios(void) for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) { ourchip = s3c_gpiolib_getchip(gpio_nr); - if (!ourchip) + if (!ourchip) { + gpio_nr++; continue; + } s3c_pm_resume_gpio(ourchip); diff --git a/arch/arm/plat-samsung/wakeup-mask.c b/arch/arm/plat-samsung/wakeup-mask.c new file mode 100644 index 000000000000..2e09b6ad84ca --- /dev/null +++ b/arch/arm/plat-samsung/wakeup-mask.c @@ -0,0 +1,47 @@ +/* arch/arm/plat-samsung/wakeup-mask.c + * + * Copyright 2010 Ben Dooks <ben-linux@fluff.org> + * + * Support for wakeup mask interrupts on newer SoCs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/sysdev.h> +#include <linux/types.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <plat/wakeup-mask.h> +#include <plat/pm.h> + +void samsung_sync_wakemask(void __iomem *reg, + struct samsung_wakeup_mask *mask, int nr_mask) +{ + struct irq_desc *desc; + u32 val; + + val = __raw_readl(reg); + + for (; nr_mask > 0; nr_mask--, mask++) { + if (mask->irq == NO_WAKEUP_IRQ) { + val |= mask->bit; + continue; + } + + desc = irq_to_desc(mask->irq); + + /* bit of a liberty to read this directly from irq_desc. */ + if (desc->wake_depth > 0) + val &= ~mask->bit; + else + val |= mask->bit; + } + + printk(KERN_INFO "wakemask %08x => %08x\n", __raw_readl(reg), val); + __raw_writel(val, reg); +} |