diff options
Diffstat (limited to 'arch/arm')
64 files changed, 286 insertions, 551 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c49a775937db..32cbbd565902 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1983,8 +1983,6 @@ config XIP_PHYS_ADDR config KEXEC bool "Kexec system call (EXPERIMENTAL)" depends on (!SMP || PM_SLEEP_SMP) - select CRYPTO - select CRYPTO_SHA256 help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 9b3d2ba82f13..8689949bdba3 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -804,7 +804,7 @@ usb1: usb@48390000 { compatible = "synopsys,dwc3"; - reg = <0x48390000 0x17000>; + reg = <0x48390000 0x10000>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb2_phy1>; phy-names = "usb2-phy"; @@ -826,7 +826,7 @@ usb2: usb@483d0000 { compatible = "synopsys,dwc3"; - reg = <0x483d0000 0x17000>; + reg = <0x483d0000 0x10000>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb2_phy2>; phy-names = "usb2-phy"; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 646a6eade788..e7ac47fa6615 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -260,7 +260,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; - clock-frequency = <400000>; + clock-frequency = <100000>; tps65218: tps65218@24 { reg = <0x24>; @@ -424,7 +424,7 @@ ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { reg = <0 0 4>; /* device IO registers */ - ti,nand-ecc-opt = "bch8"; + ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; gpmc,device-width = <1>; @@ -443,8 +443,6 @@ gpmc,rd-cycle-ns = <40>; gpmc,wr-cycle-ns = <40>; gpmc,wait-pin = <0>; - gpmc,wait-on-read; - gpmc,wait-on-write; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index ed7dd2395915..ac3e4859935f 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -435,13 +435,13 @@ }; &gpmc { - status = "okay"; + status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */ pinctrl-names = "default"; pinctrl-0 = <&nand_flash_x8>; ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ nand@0,0 { reg = <0 0 0>; /* CS0, offset 0 */ - ti,nand-ecc-opt = "bch8"; + ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; gpmc,device-width = <1>; @@ -459,8 +459,7 @@ gpmc,access-ns = <30>; /* tCEA + 4*/ gpmc,rd-cycle-ns = <40>; gpmc,wr-cycle-ns = <40>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; + gpmc,wait-pin = <0>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; @@ -557,7 +556,7 @@ }; &qspi { - status = "okay"; + status = "disabled"; /* Disable GPMC (NAND) when enabling QSPI */ pinctrl-names = "default"; pinctrl-0 = <&qspi1_default>; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 65ccf564b9a5..6c97d4af61ee 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -149,7 +149,7 @@ usb: usbck { compatible = "atmel,at91rm9200-clk-usb"; #clock-cells = <0>; - atmel,clk-divisors = <1 2>; + atmel,clk-divisors = <1 2 0 0>; clocks = <&pllb>; }; diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 31f7652612fc..4e0abbd9d655 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -40,6 +40,7 @@ }; pllb: pllbck { + compatible = "atmel,at91sam9g20-clk-pllb"; atmel,clk-input-range = <2000000 32000000>; atmel,pll-clk-output-ranges = <30000000 100000000 0 0>; }; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 50f8022905a1..e03fbf3c6889 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "dra74x.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "TI DRA742"; @@ -24,9 +25,29 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + vtt_fixed: fixedregulator-vtt { + compatible = "regulator-fixed"; + regulator-name = "vtt_fixed"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; + }; }; &dra7_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = <&vtt_pin>; + + vtt_pin: pinmux_vtt_pin { + pinctrl-single,pins = < + 0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */ + >; + }; + i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */ @@ -43,20 +64,19 @@ i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < - 0x410 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */ - 0x414 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + 0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */ + 0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */ >; }; mcspi1_pins: pinmux_mcspi1_pins { pinctrl-single,pins = < - 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi2_clk */ - 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi2_d1 */ - 0x3ac (PIN_INPUT | MUX_MODE0) /* spi2_d0 */ - 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */ - 0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs1 */ - 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs2 */ - 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs3 */ + 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */ + 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */ + 0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */ + 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */ + 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */ + 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */ >; }; @@ -284,7 +304,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins>; - clock-frequency = <3400000>; + clock-frequency = <400000>; }; &mcspi1 { @@ -483,7 +503,7 @@ reg = <0x001c0000 0x00020000>; }; partition@7 { - label = "NAND.u-boot-env"; + label = "NAND.u-boot-env.backup1"; reg = <0x001e0000 0x00020000>; }; partition@8 { @@ -504,3 +524,8 @@ &usb2_phy2 { phy-supply = <&ldousb_reg>; }; + +&gpio7 { + ti,no-reset-on-init; + ti,no-idle-on-init; +}; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 97f603c4483d..d678152db4cb 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -245,7 +245,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@48055000 { @@ -256,7 +256,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@48057000 { @@ -267,7 +267,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@48059000 { @@ -278,7 +278,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@4805b000 { @@ -289,7 +289,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@4805d000 { @@ -300,7 +300,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio7: gpio@48051000 { @@ -311,7 +311,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio8: gpio@48053000 { @@ -322,7 +322,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; uart1: serial@4806a000 { diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 6d6d23c83d30..adadaf97ac01 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -134,6 +134,8 @@ i2c@13860000 { pinctrl-0 = <&i2c0_bus>; pinctrl-names = "default"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; status = "okay"; usb3503: usb3503@08 { @@ -148,6 +150,10 @@ max77686: pmic@09 { compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; reg = <0x09>; #clock-cells = <1>; @@ -368,4 +374,11 @@ samsung,pins = "gpx1-3"; samsung,pin-pud = <0>; }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts index f1bbf9a32991..82d623d05915 100644 --- a/arch/arm/boot/dts/imx53-qsrb.dts +++ b/arch/arm/boot/dts/imx53-qsrb.dts @@ -28,6 +28,12 @@ MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec >; }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX53_PAD_CSI0_DAT5__GPIO5_23 0x1e4 /* IRQ */ + >; + }; }; }; @@ -38,6 +44,8 @@ pmic: mc34708@8 { compatible = "fsl,mc34708"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; reg = <0x08>; interrupt-parent = <&gpio5>; interrupts = <23 0x8>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 64fa27b36be0..c6c58c1c00e3 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -731,7 +731,7 @@ compatible = "fsl,imx53-vpu"; reg = <0x63ff4000 0x1000>; interrupts = <9>; - clocks = <&clks IMX5_CLK_VPU_GATE>, + clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>, <&clks IMX5_CLK_VPU_GATE>; clock-names = "per", "ahb"; resets = <&src 1>; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index c8e51dd41b8f..71598546087f 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -58,7 +58,7 @@ sound-spdif { compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; + model = "On-board SPDIF"; /* IMX6 doesn't implement this yet */ spdif-controller = <&spdif>; spdif-out; @@ -181,11 +181,13 @@ }; &usbh1 { + disable-over-current; vbus-supply = <®_usbh1_vbus>; status = "okay"; }; &usbotg { + disable-over-current; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; vbus-supply = <®_usbotg_vbus>; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 8c1cb53464a0..4fa254347798 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -119,7 +119,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 0>; + phy-reset-gpios = <&gpio1 25 0>; phy-supply = <&vgen2_1v2_eth>; status = "okay"; }; @@ -339,6 +339,7 @@ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index e8e781656b3f..6a524ca011e7 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -61,7 +61,7 @@ sound-spdif { compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; + model = "Integrated SPDIF"; /* IMX6 doesn't implement this yet */ spdif-controller = <&spdif>; spdif-out; @@ -130,16 +130,23 @@ fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; + pinctrl_cubox_i_usbh1: cubox-i-usbh1 { + fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>; + }; + pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus { fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>; }; - pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id { + pinctrl_cubox_i_usbotg: cubox-i-usbotg { /* - * The Cubox-i pulls this low, but as it's pointless + * The Cubox-i pulls ID low, but as it's pointless * leaving it as a pull-up, even if it is just 10uA. */ - fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + >; }; pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus { @@ -173,13 +180,15 @@ }; &usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_usbh1>; vbus-supply = <®_usbh1_vbus>; status = "okay"; }; &usbotg { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>; + pinctrl-0 = <&pinctrl_cubox_i_usbotg>; vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index d16066608e21..db9f45b2c573 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -17,7 +17,7 @@ enet { pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 { fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 /* AR8035 reset */ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h index 3e0b816dac08..bb9c6b78cb97 100644 --- a/arch/arm/boot/dts/imx6sx-pinfunc.h +++ b/arch/arm/boot/dts/imx6sx-pinfunc.h @@ -78,7 +78,7 @@ #define MX6SX_PAD_GPIO1_IO07__USDHC2_WP 0x0030 0x0378 0x0870 0x1 0x1 #define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO 0x0030 0x0378 0x0770 0x2 0x0 #define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK 0x0030 0x0378 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x082C 0x4 0x1 +#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x0000 0x4 0x0 #define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7 0x0030 0x0378 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET 0x0030 0x0378 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT 0x0030 0x0378 0x0000 0x7 0x0 @@ -96,7 +96,7 @@ #define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B 0x0038 0x0380 0x0000 0x1 0x0 #define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1 0x0038 0x0380 0x0820 0x2 0x0 #define MX6SX_PAD_GPIO1_IO09__CCM_OUT0 0x0038 0x0380 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0834 0x4 0x1 +#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0000 0x4 0x0 #define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x0038 0x0380 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT 0x0038 0x0380 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4 0x0038 0x0380 0x0000 0x7 0x0 @@ -213,7 +213,7 @@ #define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2 0x0068 0x03B0 0x079C 0x1 0x1 #define MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x0068 0x03B0 0x07C4 0x2 0x2 #define MX6SX_PAD_CSI_DATA07__KPP_ROW_7 0x0068 0x03B0 0x07DC 0x3 0x0 -#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0854 0x4 0x1 +#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21 0x0068 0x03B0 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16 0x0068 0x03B0 0x0000 0x6 0x0 #define MX6SX_PAD_CSI_DATA07__DCIC1_OUT 0x0068 0x03B0 0x0000 0x7 0x0 @@ -254,7 +254,7 @@ #define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC 0x0078 0x03C0 0x0708 0x0 0x0 #define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0 0x0078 0x03C0 0x07A4 0x1 0x1 #define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x0078 0x03C0 0x0674 0x2 0x1 -#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0844 0x3 0x3 +#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0000 0x3 0x0 #define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT 0x0078 0x03C0 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25 0x0078 0x03C0 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24 0x0078 0x03C0 0x0000 0x6 0x0 @@ -352,7 +352,7 @@ #define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00A0 0x03E8 0x0000 0x0 0x0 #define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00A0 0x03E8 0x076C 0x1 0x1 #define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA 0x00A0 0x03E8 0x07BC 0x2 0x1 -#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x082C 0x3 0x3 +#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x0000 0x3 0x0 #define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK 0x00A0 0x03E8 0x07E8 0x4 0x1 #define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x00A0 0x03E8 0x0000 0x5 0x0 #define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR 0x00A0 0x03E8 0x0000 0x6 0x0 @@ -404,7 +404,7 @@ #define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK 0x00B4 0x03FC 0x0808 0x7 0x0 #define MX6SX_PAD_KEY_ROW0__KPP_ROW_0 0x00B8 0x0400 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW0__USDHC3_WP 0x00B8 0x0400 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0854 0x2 0x3 +#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x00B8 0x0400 0x0718 0x3 0x0 #define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x00B8 0x0400 0x0660 0x4 0x0 #define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x00B8 0x0400 0x0000 0x5 0x0 @@ -423,7 +423,7 @@ #define MX6SX_PAD_KEY_ROW1__M4_NMI 0x00BC 0x0404 0x0000 0x8 0x0 #define MX6SX_PAD_KEY_ROW2__KPP_ROW_2 0x00C0 0x0408 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW2__USDHC4_WP 0x00C0 0x0408 0x0878 0x1 0x1 -#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x084C 0x2 0x3 +#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_ROW2__CAN1_RX 0x00C0 0x0408 0x068C 0x3 0x1 #define MX6SX_PAD_KEY_ROW2__CANFD_RX1 0x00C0 0x0408 0x0694 0x4 0x1 #define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x00C0 0x0408 0x0000 0x5 0x0 @@ -815,7 +815,7 @@ #define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05 0x0164 0x04AC 0x0000 0x0 0x0 #define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5 0x0164 0x04AC 0x0000 0x1 0x0 #define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS 0x0164 0x04AC 0x0000 0x2 0x0 -#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x083C 0x3 0x1 +#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x0000 0x3 0x0 #define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC 0x0164 0x04AC 0x064C 0x4 0x0 #define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0x0164 0x04AC 0x0000 0x5 0x0 #define MX6SX_PAD_NAND_DATA05__WEIM_AD_5 0x0164 0x04AC 0x0000 0x6 0x0 @@ -957,7 +957,7 @@ #define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12 0x019C 0x04E4 0x0000 0x7 0x0 #define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3 0x019C 0x04E4 0x0000 0x9 0x0 #define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0 0x01A0 0x04E8 0x0000 0x0 0x0 -#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x083C 0x1 0x4 +#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x0000 0x1 0x0 #define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI 0x01A0 0x04E8 0x0738 0x2 0x1 #define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS 0x01A0 0x04E8 0x0778 0x3 0x2 #define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22 0x01A0 0x04E8 0x06F4 0x4 0x1 @@ -1236,7 +1236,7 @@ #define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x0230 0x0578 0x0670 0x1 0x1 #define MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x0230 0x0578 0x0000 0x2 0x0 #define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2 0x0230 0x0578 0x0000 0x3 0x0 -#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0834 0x4 0x2 +#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0000 0x4 0x0 #define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4 0x0230 0x0578 0x0000 0x5 0x0 #define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY 0x0230 0x0578 0x0000 0x6 0x0 #define MX6SX_PAD_SD1_DATA2__CCM_OUT0 0x0230 0x0578 0x0000 0x7 0x0 @@ -1315,7 +1315,7 @@ #define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3 0x024C 0x0594 0x0000 0x8 0x0 #define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31 0x024C 0x0594 0x0000 0x9 0x0 #define MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x0250 0x0598 0x0000 0x0 0x0 -#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0844 0x1 0x0 +#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0000 0x1 0x0 #define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x0250 0x0598 0x0740 0x2 0x0 #define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS 0x0250 0x0598 0x0680 0x3 0x0 #define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC 0x0250 0x0598 0x0000 0x4 0x0 @@ -1409,7 +1409,7 @@ #define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x0274 0x05BC 0x0000 0x0 0x0 #define MX6SX_PAD_SD3_DATA7__CAN1_RX 0x0274 0x05BC 0x068C 0x1 0x0 #define MX6SX_PAD_SD3_DATA7__CANFD_RX1 0x0274 0x05BC 0x0694 0x2 0x0 -#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x083C 0x3 0x3 +#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x0000 0x3 0x0 #define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5 0x0274 0x05BC 0x0000 0x4 0x0 #define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9 0x0274 0x05BC 0x0000 0x5 0x0 #define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN 0x0274 0x05BC 0x0000 0x6 0x0 @@ -1510,7 +1510,7 @@ #define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1 0x0298 0x05E0 0x0000 0x9 0x0 #define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x029C 0x05E4 0x0000 0x0 0x0 #define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08 0x029C 0x05E4 0x0000 0x1 0x0 -#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x084C 0x2 0x1 +#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x0000 0x2 0x0 #define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0 0x029C 0x05E4 0x073C 0x3 0x0 #define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15 0x029C 0x05E4 0x0000 0x4 0x0 #define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x029C 0x05E4 0x0000 0x5 0x0 diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 3c3e6da1deac..a9aae88b74f5 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -292,6 +292,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; }; &gpio1 { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index b15f1a77d684..1fe45d1f75ec 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -353,7 +353,7 @@ }; twl_power: power { - compatible = "ti,twl4030-power-n900"; + compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off"; ti,use_poweroff; }; }; diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 02f69f4a8fd3..9bad94efe1c8 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -107,7 +107,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <1 0 0x08000000>; - ti,nand-ecc-opt = "ham1"; + ti,nand-ecc-opt = "sw"; nand-bus-width = <8>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <36>; diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi index e47ff69dcf70..5c375003bad1 100644 --- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi +++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi @@ -467,6 +467,7 @@ ti,bit-shift = <0x1e>; reg = <0x0d00>; ti,set-bit-to-disable; + ti,set-rate-parent; }; dpll4_m6_ck: dpll4_m6_ck { diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index e67a23b5d788..58c27466f012 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -367,10 +367,12 @@ l3_iclk_div: l3_iclk_div { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <4>; + reg = <0x100>; clocks = <&dpll_core_h12x2_ck>; - clock-mult = <1>; - clock-div = <1>; + ti,index-power-of-two; }; gpu_l3_iclk: gpu_l3_iclk { @@ -383,10 +385,12 @@ l4_root_clk_div: l4_root_clk_div { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <8>; + reg = <0x100>; clocks = <&l3_iclk_div>; - clock-mult = <1>; - clock-div = <1>; + ti,index-power-of-two; }; slimbus1_slimbus_clk: slimbus1_slimbus_clk { diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 23486c081a69..be59014474b2 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -275,11 +275,6 @@ renesas,function = "msiof0"; }; - i2c6_pins: i2c6 { - renesas,groups = "i2c6"; - renesas,function = "i2c6"; - }; - usb0_pins: usb0 { renesas,groups = "usb0"; renesas,function = "usb0"; @@ -420,8 +415,6 @@ }; &i2c6 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; status = "okay"; clock-frequency = <100000>; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index 042f821d9e4d..c9d912da6141 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -149,6 +149,8 @@ &mmc0 { /* sdmmc */ num-slots = <1>; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; slot@0 { diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 171b610db709..5e4e3c238b2d 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -179,6 +179,8 @@ &mmc0 { num-slots = <1>; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; slot@0 { diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 4a2000c620ad..3e97a669f15e 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -116,7 +116,6 @@ msp2: msp@80117000 { pinctrl-names = "default"; pinctrl-0 = <&msp2_default_mode>; - status = "okay"; }; msp3: msp@80125000 { diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 44b07e512c24..e06fbfc55bb7 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -660,6 +660,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 0>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c1: i2c@01c2b000 { @@ -670,6 +672,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 1>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c2: i2c@01c2b400 { @@ -680,6 +684,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 2>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c3: i2c@01c2b800 { @@ -690,6 +696,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 3>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; gmac: ethernet@01c30000 { diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 8adaa7871dd3..a5446cba9804 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -423,7 +423,7 @@ vcc4-supply = <&sys_3v3_reg>; vcc5-supply = <&sys_3v3_reg>; vcc6-supply = <&vio_reg>; - vcc7-supply = <&sys_5v0_reg>; + vcc7-supply = <&charge_pump_5v0_reg>; vccio-supply = <&sys_3v3_reg>; regulators { @@ -674,5 +674,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + charge_pump_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index bf16f8e65627..c4ed1bec4d92 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -201,7 +201,7 @@ vcc4-supply = <&sys_3v3_reg>; vcc5-supply = <&sys_3v3_reg>; vcc6-supply = <&vio_reg>; - vcc7-supply = <&sys_5v0_reg>; + vcc7-supply = <&charge_pump_5v0_reg>; vccio-supply = <&sys_3v3_reg>; regulators { @@ -373,5 +373,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + charge_pump_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 2e3bd3172b23..55eb35f068fb 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -83,10 +83,6 @@ regulator-always-on; }; - clk32kg: regulator-clk32kg { - compatible = "ti,twl6030-clk32kg"; - }; - twl_usb_comparator: usb-comparator { compatible = "ti,twl6030-usb"; interrupts = <4>, <10>; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 11d733406c7e..b8a5e8c68f06 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -168,7 +168,7 @@ }; pinctrl_esdhc1: esdhc1grp { - fsl,fsl,pins = < + fsl,pins = < VF610_PAD_PTA24__ESDHC1_CLK 0x31ef VF610_PAD_PTA25__ESDHC1_CMD 0x31ef VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index 88099175fc56..d86771abbf57 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -1443,14 +1443,14 @@ void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no) EXPORT_SYMBOL(edma_assign_channel_eventq); static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata, - struct edma *edma_cc) + struct edma *edma_cc, int cc_id) { int i; u32 value, cccfg; s8 (*queue_priority_map)[2]; /* Decode the eDMA3 configuration from CCCFG register */ - cccfg = edma_read(0, EDMA_CCCFG); + cccfg = edma_read(cc_id, EDMA_CCCFG); value = GET_NUM_REGN(cccfg); edma_cc->num_region = BIT(value); @@ -1464,7 +1464,8 @@ static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata, value = GET_NUM_EVQUE(cccfg); edma_cc->num_tc = value + 1; - dev_dbg(dev, "eDMA3 HW configuration (cccfg: 0x%08x):\n", cccfg); + dev_dbg(dev, "eDMA3 CC%d HW configuration (cccfg: 0x%08x):\n", cc_id, + cccfg); dev_dbg(dev, "num_region: %u\n", edma_cc->num_region); dev_dbg(dev, "num_channel: %u\n", edma_cc->num_channels); dev_dbg(dev, "num_slot: %u\n", edma_cc->num_slots); @@ -1684,7 +1685,7 @@ static int edma_probe(struct platform_device *pdev) return -ENOMEM; /* Get eDMA3 configuration from IP */ - ret = edma_setup_from_hw(dev, info[j], edma_cc[j]); + ret = edma_setup_from_hw(dev, info[j], edma_cc[j], j); if (ret) return ret; diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index fd43f7f55b70..79ecb4f34ffb 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -472,7 +472,6 @@ static inline void __sync_cache_range_r(volatile void *p, size_t size) "mcr p15, 0, r0, c1, c0, 0 @ set SCTLR \n\t" \ "isb \n\t" \ "bl v7_flush_dcache_"__stringify(level)" \n\t" \ - "clrex \n\t" \ "mrc p15, 0, r0, c1, c0, 1 @ get ACTLR \n\t" \ "bic r0, r0, #(1 << 6) @ disable local coherency \n\t" \ "mcr p15, 0, r0, c1, c0, 1 @ set ACTLR \n\t" \ diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 963a2515906d..819777d0e91f 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -74,6 +74,7 @@ #define ARM_CPU_PART_CORTEX_A12 0x4100c0d0 #define ARM_CPU_PART_CORTEX_A17 0x4100c0e0 #define ARM_CPU_PART_CORTEX_A15 0x4100c0f0 +#define ARM_CPU_PART_MASK 0xff00fff0 #define ARM_CPU_XSCALE_ARCH_MASK 0xe000 #define ARM_CPU_XSCALE_ARCH_V1 0x2000 @@ -179,7 +180,7 @@ static inline unsigned int __attribute_const__ read_cpuid_implementor(void) */ static inline unsigned int __attribute_const__ read_cpuid_part(void) { - return read_cpuid_id() & 0xff00fff0; + return read_cpuid_id() & ARM_CPU_PART_MASK; } static inline unsigned int __attribute_const__ __deprecated read_cpuid_part_number(void) diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index f4b46d39b9cf..afb9cafd3786 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -50,6 +50,7 @@ typedef struct user_fp elf_fpregset_t; #define R_ARM_ABS32 2 #define R_ARM_CALL 28 #define R_ARM_JUMP24 29 +#define R_ARM_TARGET1 38 #define R_ARM_V4BX 40 #define R_ARM_PREL31 42 #define R_ARM_MOVW_ABS_NC 43 diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h index a252c0bfacf5..0ad7d490ee6f 100644 --- a/arch/arm/include/asm/smp_plat.h +++ b/arch/arm/include/asm/smp_plat.h @@ -8,6 +8,7 @@ #include <linux/cpumask.h> #include <linux/err.h> +#include <asm/cpu.h> #include <asm/cputype.h> /* @@ -25,6 +26,20 @@ static inline bool is_smp(void) #endif } +/** + * smp_cpuid_part() - return part id for a given cpu + * @cpu: logical cpu id. + * + * Return: part id of logical cpu passed as argument. + */ +static inline unsigned int smp_cpuid_part(int cpu) +{ + struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpu); + + return is_smp() ? cpu_info->cpuid & ARM_CPU_PART_MASK : + read_cpuid_part(); +} + /* all SMP configurations have the extended CPUID registers */ #ifndef CONFIG_MMU #define tlb_ops_need_broadcast() 0 diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 8db307d0954b..2fdf8679b46e 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -208,26 +208,21 @@ #endif .endif msr spsr_cxsf, \rpsr -#if defined(CONFIG_CPU_V6) - ldr r0, [sp] - strex r1, r2, [sp] @ clear the exclusive monitor - ldmib sp, {r1 - pc}^ @ load r1 - pc, cpsr -#elif defined(CONFIG_CPU_32v6K) - clrex @ clear the exclusive monitor - ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr -#else - ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr +#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K) + @ We must avoid clrex due to Cortex-A15 erratum #830321 + sub r0, sp, #4 @ uninhabited address + strex r1, r2, [r0] @ clear the exclusive monitor #endif + ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr .endm .macro restore_user_regs, fast = 0, offset = 0 ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr ldr lr, [sp, #\offset + S_PC]! @ get pc msr spsr_cxsf, r1 @ save in spsr_svc -#if defined(CONFIG_CPU_V6) +#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K) + @ We must avoid clrex due to Cortex-A15 erratum #830321 strex r1, r2, [sp] @ clear the exclusive monitor -#elif defined(CONFIG_CPU_32v6K) - clrex @ clear the exclusive monitor #endif .if \fast ldmdb sp, {r1 - lr}^ @ get calling r1 - lr @@ -261,7 +256,10 @@ .endif ldr lr, [sp, #S_SP] @ top of the stack ldrd r0, r1, [sp, #S_LR] @ calling lr and pc - clrex @ clear the exclusive monitor + + @ We must avoid clrex due to Cortex-A15 erratum #830321 + strex r2, r1, [sp, #S_LR] @ clear the exclusive monitor + stmdb lr!, {r0, r1, \rpsr} @ calling lr and rfe context ldmia sp, {r0 - r12} mov sp, lr @@ -282,13 +280,16 @@ .endm #else /* ifdef CONFIG_CPU_V7M */ .macro restore_user_regs, fast = 0, offset = 0 - clrex @ clear the exclusive monitor mov r2, sp load_user_sp_lr r2, r3, \offset + S_SP @ calling sp, lr ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr ldr lr, [sp, #\offset + S_PC] @ get pc add sp, sp, #\offset + S_SP msr spsr_cxsf, r1 @ save in spsr_svc + + @ We must avoid clrex due to Cortex-A15 erratum #830321 + strex r1, r2, [sp] @ clear the exclusive monitor + .if \fast ldmdb sp, {r1 - r12} @ get calling r1 - r12 .else diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 45e478157278..6a4dffefd357 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -91,6 +91,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, break; case R_ARM_ABS32: + case R_ARM_TARGET1: *(u32 *)loc += sym->st_value; break; diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c index 4c979d466cc1..a96a8043277c 100644 --- a/arch/arm/kvm/handle_exit.c +++ b/arch/arm/kvm/handle_exit.c @@ -93,6 +93,8 @@ static int kvm_handle_wfx(struct kvm_vcpu *vcpu, struct kvm_run *run) else kvm_vcpu_block(vcpu); + kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); + return 1; } diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S index 991415d978b6..3988e72d16ff 100644 --- a/arch/arm/kvm/init.S +++ b/arch/arm/kvm/init.S @@ -99,6 +99,10 @@ __do_hyp_init: mrc p15, 0, r0, c10, c2, 1 mcr p15, 4, r0, c10, c2, 1 + @ Invalidate the stale TLBs from Bootloader + mcr p15, 4, r0, c8, c7, 0 @ TLBIALLH + dsb ish + @ Set the HSCTLR to: @ - ARM/THUMB exceptions: Kernel config (Thumb-2 kernel) @ - Endianness: Kernel config diff --git a/arch/arm/mach-at91/board-dt-rm9200.c b/arch/arm/mach-at91/board-dt-rm9200.c index 3a185faee795..f4b6e91843e4 100644 --- a/arch/arm/mach-at91/board-dt-rm9200.c +++ b/arch/arm/mach-at91/board-dt-rm9200.c @@ -14,6 +14,7 @@ #include <linux/gpio.h> #include <linux/of.h> #include <linux/of_irq.h> +#include <linux/clk-provider.h> #include <asm/setup.h> #include <asm/irq.h> @@ -35,13 +36,21 @@ static void __init at91rm9200_dt_init_irq(void) of_irq_init(irq_of_match); } +static void __init at91rm9200_dt_timer_init(void) +{ +#if defined(CONFIG_COMMON_CLK) + of_clk_init(NULL); +#endif + at91rm9200_timer_init(); +} + static const char *at91rm9200_dt_board_compat[] __initdata = { "atmel,at91rm9200", NULL }; DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)") - .init_time = at91rm9200_timer_init, + .init_time = at91rm9200_dt_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = at91rm9200_dt_initialize, diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 67c492aabf4d..b19a39652545 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -36,5 +36,4 @@ obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o ifeq ($(CONFIG_ARCH_BRCMSTB),y) obj-y += brcmstb.o -obj-$(CONFIG_SMP) += headsmp-brcmstb.o platsmp-brcmstb.o endif diff --git a/arch/arm/mach-bcm/brcmstb.h b/arch/arm/mach-bcm/brcmstb.h deleted file mode 100644 index ec0c3d112b36..000000000000 --- a/arch/arm/mach-bcm/brcmstb.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (C) 2013-2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __BRCMSTB_H__ -#define __BRCMSTB_H__ - -void brcmstb_secondary_startup(void); - -#endif /* __BRCMSTB_H__ */ diff --git a/arch/arm/mach-bcm/headsmp-brcmstb.S b/arch/arm/mach-bcm/headsmp-brcmstb.S deleted file mode 100644 index 199c1ea58248..000000000000 --- a/arch/arm/mach-bcm/headsmp-brcmstb.S +++ /dev/null @@ -1,33 +0,0 @@ -/* - * SMP boot code for secondary CPUs - * Based on arch/arm/mach-tegra/headsmp.S - * - * Copyright (C) 2010 NVIDIA, Inc. - * Copyright (C) 2013-2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <asm/assembler.h> -#include <linux/linkage.h> -#include <linux/init.h> - - .section ".text.head", "ax" - -ENTRY(brcmstb_secondary_startup) - /* - * Ensure CPU is in a sane state by disabling all IRQs and switching - * into SVC mode. - */ - setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0 - - bl v7_invalidate_l1 - b secondary_startup -ENDPROC(brcmstb_secondary_startup) diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c deleted file mode 100644 index af780e9c23a6..000000000000 --- a/arch/arm/mach-bcm/platsmp-brcmstb.c +++ /dev/null @@ -1,363 +0,0 @@ -/* - * Broadcom STB CPU SMP and hotplug support for ARM - * - * Copyright (C) 2013-2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/of_address.h> -#include <linux/of_platform.h> -#include <linux/printk.h> -#include <linux/regmap.h> -#include <linux/smp.h> -#include <linux/mfd/syscon.h> -#include <linux/spinlock.h> - -#include <asm/cacheflush.h> -#include <asm/cp15.h> -#include <asm/mach-types.h> -#include <asm/smp_plat.h> - -#include "brcmstb.h" - -enum { - ZONE_MAN_CLKEN_MASK = BIT(0), - ZONE_MAN_RESET_CNTL_MASK = BIT(1), - ZONE_MAN_MEM_PWR_MASK = BIT(4), - ZONE_RESERVED_1_MASK = BIT(5), - ZONE_MAN_ISO_CNTL_MASK = BIT(6), - ZONE_MANUAL_CONTROL_MASK = BIT(7), - ZONE_PWR_DN_REQ_MASK = BIT(9), - ZONE_PWR_UP_REQ_MASK = BIT(10), - ZONE_BLK_RST_ASSERT_MASK = BIT(12), - ZONE_PWR_OFF_STATE_MASK = BIT(25), - ZONE_PWR_ON_STATE_MASK = BIT(26), - ZONE_DPG_PWR_STATE_MASK = BIT(28), - ZONE_MEM_PWR_STATE_MASK = BIT(29), - ZONE_RESET_STATE_MASK = BIT(31), - CPU0_PWR_ZONE_CTRL_REG = 1, - CPU_RESET_CONFIG_REG = 2, -}; - -static void __iomem *cpubiuctrl_block; -static void __iomem *hif_cont_block; -static u32 cpu0_pwr_zone_ctrl_reg; -static u32 cpu_rst_cfg_reg; -static u32 hif_cont_reg; - -#ifdef CONFIG_HOTPLUG_CPU -static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state); - -static int per_cpu_sw_state_rd(u32 cpu) -{ - sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu))); - return per_cpu(per_cpu_sw_state, cpu); -} - -static void per_cpu_sw_state_wr(u32 cpu, int val) -{ - per_cpu(per_cpu_sw_state, cpu) = val; - dmb(); - sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu))); - dsb_sev(); -} -#else -static inline void per_cpu_sw_state_wr(u32 cpu, int val) { } -#endif - -static void __iomem *pwr_ctrl_get_base(u32 cpu) -{ - void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg; - base += (cpu_logical_map(cpu) * 4); - return base; -} - -static u32 pwr_ctrl_rd(u32 cpu) -{ - void __iomem *base = pwr_ctrl_get_base(cpu); - return readl_relaxed(base); -} - -static void pwr_ctrl_wr(u32 cpu, u32 val) -{ - void __iomem *base = pwr_ctrl_get_base(cpu); - writel(val, base); -} - -static void cpu_rst_cfg_set(u32 cpu, int set) -{ - u32 val; - val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg); - if (set) - val |= BIT(cpu_logical_map(cpu)); - else - val &= ~BIT(cpu_logical_map(cpu)); - writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg); -} - -static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr) -{ - const int reg_ofs = cpu_logical_map(cpu) * 8; - writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs); - writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs); -} - -static void brcmstb_cpu_boot(u32 cpu) -{ - pr_info("SMP: Booting CPU%d...\n", cpu); - - /* - * set the reset vector to point to the secondary_startup - * routine - */ - cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup)); - - /* unhalt the cpu */ - cpu_rst_cfg_set(cpu, 0); -} - -static void brcmstb_cpu_power_on(u32 cpu) -{ - /* - * The secondary cores power was cut, so we must go through - * power-on initialization. - */ - u32 tmp; - - pr_info("SMP: Powering up CPU%d...\n", cpu); - - /* Request zone power up */ - pwr_ctrl_wr(cpu, ZONE_PWR_UP_REQ_MASK); - - /* Wait for the power up FSM to complete */ - do { - tmp = pwr_ctrl_rd(cpu); - } while (!(tmp & ZONE_PWR_ON_STATE_MASK)); - - per_cpu_sw_state_wr(cpu, 1); -} - -static int brcmstb_cpu_get_power_state(u32 cpu) -{ - int tmp = pwr_ctrl_rd(cpu); - return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1; -} - -#ifdef CONFIG_HOTPLUG_CPU - -static void brcmstb_cpu_die(u32 cpu) -{ - v7_exit_coherency_flush(all); - - /* Prevent all interrupts from reaching this CPU. */ - arch_local_irq_disable(); - - /* - * Final full barrier to ensure everything before this instruction has - * quiesced. - */ - isb(); - dsb(); - - per_cpu_sw_state_wr(cpu, 0); - - /* Sit and wait to die */ - wfi(); - - /* We should never get here... */ - panic("Spurious interrupt on CPU %d received!\n", cpu); -} - -static int brcmstb_cpu_kill(u32 cpu) -{ - u32 tmp; - - pr_info("SMP: Powering down CPU%d...\n", cpu); - - while (per_cpu_sw_state_rd(cpu)) - ; - - /* Program zone reset */ - pwr_ctrl_wr(cpu, ZONE_RESET_STATE_MASK | ZONE_BLK_RST_ASSERT_MASK | - ZONE_PWR_DN_REQ_MASK); - - /* Verify zone reset */ - tmp = pwr_ctrl_rd(cpu); - if (!(tmp & ZONE_RESET_STATE_MASK)) - pr_err("%s: Zone reset bit for CPU %d not asserted!\n", - __func__, cpu); - - /* Wait for power down */ - do { - tmp = pwr_ctrl_rd(cpu); - } while (!(tmp & ZONE_PWR_OFF_STATE_MASK)); - - /* Settle-time from Broadcom-internal DVT reference code */ - udelay(7); - - /* Assert reset on the CPU */ - cpu_rst_cfg_set(cpu, 1); - - return 1; -} - -#endif /* CONFIG_HOTPLUG_CPU */ - -static int __init setup_hifcpubiuctrl_regs(struct device_node *np) -{ - int rc = 0; - char *name; - struct device_node *syscon_np = NULL; - - name = "syscon-cpu"; - - syscon_np = of_parse_phandle(np, name, 0); - if (!syscon_np) { - pr_err("can't find phandle %s\n", name); - rc = -EINVAL; - goto cleanup; - } - - cpubiuctrl_block = of_iomap(syscon_np, 0); - if (!cpubiuctrl_block) { - pr_err("iomap failed for cpubiuctrl_block\n"); - rc = -EINVAL; - goto cleanup; - } - - rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG, - &cpu0_pwr_zone_ctrl_reg); - if (rc) { - pr_err("failed to read 1st entry from %s property (%d)\n", name, - rc); - rc = -EINVAL; - goto cleanup; - } - - rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG, - &cpu_rst_cfg_reg); - if (rc) { - pr_err("failed to read 2nd entry from %s property (%d)\n", name, - rc); - rc = -EINVAL; - goto cleanup; - } - -cleanup: - if (syscon_np) - of_node_put(syscon_np); - - return rc; -} - -static int __init setup_hifcont_regs(struct device_node *np) -{ - int rc = 0; - char *name; - struct device_node *syscon_np = NULL; - - name = "syscon-cont"; - - syscon_np = of_parse_phandle(np, name, 0); - if (!syscon_np) { - pr_err("can't find phandle %s\n", name); - rc = -EINVAL; - goto cleanup; - } - - hif_cont_block = of_iomap(syscon_np, 0); - if (!hif_cont_block) { - pr_err("iomap failed for hif_cont_block\n"); - rc = -EINVAL; - goto cleanup; - } - - /* offset is at top of hif_cont_block */ - hif_cont_reg = 0; - -cleanup: - if (syscon_np) - of_node_put(syscon_np); - - return rc; -} - -static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus) -{ - int rc; - struct device_node *np; - char *name; - - name = "brcm,brcmstb-smpboot"; - np = of_find_compatible_node(NULL, NULL, name); - if (!np) { - pr_err("can't find compatible node %s\n", name); - return; - } - - rc = setup_hifcpubiuctrl_regs(np); - if (rc) - return; - - rc = setup_hifcont_regs(np); - if (rc) - return; -} - -static DEFINE_SPINLOCK(boot_lock); - -static void brcmstb_secondary_init(unsigned int cpu) -{ - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - -static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - /* - * set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* Bring up power to the core if necessary */ - if (brcmstb_cpu_get_power_state(cpu) == 0) - brcmstb_cpu_power_on(cpu); - - brcmstb_cpu_boot(cpu); - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return 0; -} - -static struct smp_operations brcmstb_smp_ops __initdata = { - .smp_prepare_cpus = brcmstb_cpu_ctrl_setup, - .smp_secondary_init = brcmstb_secondary_init, - .smp_boot_secondary = brcmstb_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_kill = brcmstb_cpu_kill, - .cpu_die = brcmstb_cpu_die, -#endif -}; - -CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops); diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c index b2f8b60cf0e9..dc9a764a7c37 100644 --- a/arch/arm/mach-exynos/mcpm-exynos.c +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -43,7 +43,6 @@ "mcr p15, 0, r0, c1, c0, 0 @ set SCTLR\n\t" \ "isb\n\t"\ "bl v7_flush_dcache_"__stringify(level)"\n\t" \ - "clrex\n\t"\ "mrc p15, 0, r0, c1, c0, 1 @ get ACTLR\n\t" \ "bic r0, r0, #(1 << 6) @ disable local coherency\n\t" \ /* Dummy Load of a device register to avoid Erratum 799270 */ \ diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 9de84a215abd..be9a51afe05a 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -85,7 +85,6 @@ config SOC_IMX25 config SOC_IMX27 bool - select ARCH_HAS_OPP select CPU_ARM926T select IMX_HAVE_IOMUX_V1 select MXC_AVIC @@ -659,7 +658,6 @@ comment "Device tree only" config SOC_IMX5 bool - select ARCH_HAS_OPP select HAVE_IMX_SRC select MXC_TZIC diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index ac88599ca080..23c02932bf84 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -93,9 +93,11 @@ obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o +ifdef CONFIG_SOC_IMX6 AFLAGS_headsmp.o :=-Wa,-march=armv7-a obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +endif obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 6cceb7765c14..29d412975aff 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -194,6 +194,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2); + if (cpu_is_imx6dl()) { + clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1); + clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1); + } clk[IMX6QDL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); clk[IMX6QDL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock); @@ -217,8 +221,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); clk[IMX6QDL_CLK_ASRC_SEL] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); clk[IMX6QDL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels)); - clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); - clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); + if (cpu_is_imx6q()) { + clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); + clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); + } clk[IMX6QDL_CLK_GPU2D_CORE_SEL] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels)); clk[IMX6QDL_CLK_GPU3D_CORE_SEL] = imx_clk_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels)); clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels)); diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index 74b50f1982db..ca4ea2daf25b 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -173,6 +173,8 @@ ENTRY(imx6_suspend) ldr r6, [r11, #0x0] ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET] ldr r6, [r11, #0x0] + ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] + ldr r6, [r11, #0x0] /* use r11 to store the IO address */ ldr r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET] diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index e87f2a83d6bf..2d245c2e641c 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, board_nand_data.nr_parts = nr_parts; board_nand_data.devsize = nand_type; - board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW; + board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_SW; gpmc_nand_init(&board_nand_data, gpmc_t); } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 8897ad7035fd..cb7764314f17 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -49,7 +49,8 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) return 0; /* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */ - if (ecc_opt == OMAP_ECC_HAM1_CODE_HW) + if (ecc_opt == OMAP_ECC_HAM1_CODE_HW || + ecc_opt == OMAP_ECC_HAM1_CODE_SW) return 1; else return 0; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 8bc13380f0a0..2f97228f188a 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1207,8 +1207,7 @@ int gpmc_cs_program_settings(int cs, struct gpmc_settings *p) } } - if ((p->wait_on_read || p->wait_on_write) && - (p->wait_pin > gpmc_nr_waitpins)) { + if (p->wait_pin > gpmc_nr_waitpins) { pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin); return -EINVAL; } @@ -1288,8 +1287,8 @@ void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p) p->wait_on_write = of_property_read_bool(np, "gpmc,wait-on-write"); if (!p->wait_on_read && !p->wait_on_write) - pr_warn("%s: read/write wait monitoring not enabled!\n", - __func__); + pr_debug("%s: rd/wr wait monitoring not enabled!\n", + __func__); } } @@ -1403,8 +1402,11 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, pr_err("%s: ti,nand-ecc-opt not found\n", __func__); return -ENODEV; } - if (!strcmp(s, "ham1") || !strcmp(s, "sw") || - !strcmp(s, "hw") || !strcmp(s, "hw-romcode")) + + if (!strcmp(s, "sw")) + gpmc_nand_data->ecc_opt = OMAP_ECC_HAM1_CODE_SW; + else if (!strcmp(s, "ham1") || + !strcmp(s, "hw") || !strcmp(s, "hw-romcode")) gpmc_nand_data->ecc_opt = OMAP_ECC_HAM1_CODE_HW; else if (!strcmp(s, "bch4")) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index d42022f2a71e..53841dea80ea 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -663,7 +663,7 @@ void __init dra7xxx_check_revision(void) default: /* Unknown default to latest silicon rev as default*/ - pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n", + pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%x)\n", __func__, idcode, hawkeye, rev); omap_revision = DRA752_REV_ES1_1; } diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 01ef59def44b..d22c30d3ccfa 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -56,7 +56,7 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias, r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias); if (!IS_ERR(r)) { - dev_warn(&od->pdev->dev, + dev_dbg(&od->pdev->dev, "alias %s already exists\n", clk_alias); clk_put(r); return; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 6c074f37cdd2..8fd87a3055bf 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2185,6 +2185,8 @@ static int _enable(struct omap_hwmod *oh) oh->mux->pads_dynamic))) { omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED); _reconfigure_io_chain(); + } else if (oh->flags & HWMOD_FORCE_MSTANDBY) { + _reconfigure_io_chain(); } _add_initiator_dep(oh, mpu_oh); @@ -2291,6 +2293,8 @@ static int _idle(struct omap_hwmod *oh) if (oh->mux && oh->mux->pads_dynamic) { omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE); _reconfigure_io_chain(); + } else if (oh->flags & HWMOD_FORCE_MSTANDBY) { + _reconfigure_io_chain(); } oh->_state = _HWMOD_STATE_IDLE; @@ -3345,6 +3349,9 @@ int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois) if (!ois) return 0; + if (ois[0] == NULL) /* Empty list */ + return 0; + if (!linkspace) { if (_alloc_linkspace(ois)) { pr_err("omap_hwmod: could not allocate link space\n"); diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 2757abf87fbc..5684f112654b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -35,6 +35,7 @@ #include "i2c.h" #include "mmc.h" #include "wd_timer.h" +#include "soc.h" /* Base offset for all DRA7XX interrupts external to MPUSS */ #define DRA7XX_IRQ_GIC_START 32 @@ -3261,7 +3262,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_per3__usb_otg_ss1, &dra7xx_l4_per3__usb_otg_ss2, &dra7xx_l4_per3__usb_otg_ss3, - &dra7xx_l4_per3__usb_otg_ss4, &dra7xx_l3_main_1__vcp1, &dra7xx_l4_per2__vcp1, &dra7xx_l3_main_1__vcp2, @@ -3270,8 +3270,26 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { NULL, }; +static struct omap_hwmod_ocp_if *dra74x_hwmod_ocp_ifs[] __initdata = { + &dra7xx_l4_per3__usb_otg_ss4, + NULL, +}; + +static struct omap_hwmod_ocp_if *dra72x_hwmod_ocp_ifs[] __initdata = { + NULL, +}; + int __init dra7xx_hwmod_init(void) { + int ret; + omap_hwmod_init(); - return omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs); + ret = omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs); + + if (!ret && soc_is_dra74x()) + return omap_hwmod_register_links(dra74x_hwmod_ocp_ifs); + else if (!ret && soc_is_dra72x()) + return omap_hwmod_register_links(dra72x_hwmod_ocp_ifs); + + return ret; } diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 01ca8086fb6c..4376f59626d1 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -245,6 +245,8 @@ IS_AM_SUBCLASS(437x, 0x437) #define soc_is_omap54xx() 0 #define soc_is_omap543x() 0 #define soc_is_dra7xx() 0 +#define soc_is_dra74x() 0 +#define soc_is_dra72x() 0 #if defined(MULTI_OMAP2) # if defined(CONFIG_ARCH_OMAP2) @@ -393,7 +395,11 @@ IS_OMAP_TYPE(3430, 0x3430) #if defined(CONFIG_SOC_DRA7XX) #undef soc_is_dra7xx +#undef soc_is_dra74x +#undef soc_is_dra72x #define soc_is_dra7xx() (of_machine_is_compatible("ti,dra7")) +#define soc_is_dra74x() (of_machine_is_compatible("ti,dra74")) +#define soc_is_dra72x() (of_machine_is_compatible("ti,dra72")) #endif /* Various silicon revisions for omap2 */ diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index e15dff790dbb..1e6c51c7c2d5 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -75,6 +75,7 @@ config ARCH_SH7372 select ARM_CPU_SUSPEND if PM || CPU_IDLE select CPU_V7 select SH_CLK_CPG + select SH_INTC select SYS_SUPPORTS_SH_CMT select SYS_SUPPORTS_SH_TMU @@ -85,6 +86,7 @@ config ARCH_SH73A0 select CPU_V7 select I2C select SH_CLK_CPG + select SH_INTC select RENESAS_INTC_IRQPIN select SYS_SUPPORTS_SH_CMT select SYS_SUPPORTS_SH_TMU diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index 17435c1aa2fe..126ddafad526 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -183,8 +183,8 @@ enum { static struct clk div4_clks[DIV4_NR] = { [DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT), - [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT), - [DIV4_SD1] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 0, 0x1de0, CLK_ENABLE_ON_INIT), + [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1df0, CLK_ENABLE_ON_INIT), + [DIV4_SD1] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 0, 0x1df0, CLK_ENABLE_ON_INIT), }; /* DIV6 clocks */ diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c index 10e193d707f5..453b23129cfa 100644 --- a/arch/arm/mach-shmobile/clock-r8a7791.c +++ b/arch/arm/mach-shmobile/clock-r8a7791.c @@ -152,7 +152,7 @@ enum { static struct clk div4_clks[DIV4_NR] = { [DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT), - [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT), + [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1df0, CLK_ENABLE_ON_INIT), }; /* DIV6 clocks */ diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index d8c4048b9e33..02a6f45a0b9e 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -644,7 +644,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("e6cb0000.serial", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */ - CLKDEV_DEV_ID("0xe6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */ + CLKDEV_DEV_ID("e6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]), /* SCIFA0 */ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c index 2c2754e79cb3..f61158c6ce71 100644 --- a/arch/arm/mach-vexpress/spc.c +++ b/arch/arm/mach-vexpress/spc.c @@ -426,9 +426,15 @@ static int ve_spc_populate_opps(uint32_t cluster) static int ve_init_opp_table(struct device *cpu_dev) { - int cluster = topology_physical_package_id(cpu_dev->id); - int idx, ret = 0, max_opp = info->num_opps[cluster]; - struct ve_spc_opp *opps = info->opps[cluster]; + int cluster; + int idx, ret = 0, max_opp; + struct ve_spc_opp *opps; + + cluster = topology_physical_package_id(cpu_dev->id); + cluster = cluster < 0 ? 0 : cluster; + + max_opp = info->num_opps[cluster]; + opps = info->opps[cluster]; for (idx = 0; idx < max_opp; idx++, opps++) { ret = dev_pm_opp_add(cpu_dev, opps->freq * 1000, opps->u_volt); @@ -537,6 +543,8 @@ static struct clk *ve_spc_clk_register(struct device *cpu_dev) spc->hw.init = &init; spc->cluster = topology_physical_package_id(cpu_dev->id); + spc->cluster = spc->cluster < 0 ? 0 : spc->cluster; + init.name = dev_name(cpu_dev); init.ops = &clk_spc_ops; init.flags = CLK_IS_ROOT | CLK_GET_RATE_NOCACHE; diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index 3815a8262af0..8c48c5c22a33 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -17,12 +17,6 @@ */ .align 5 ENTRY(v6_early_abort) -#ifdef CONFIG_CPU_V6 - sub r1, sp, #4 @ Get unused stack location - strex r0, r1, [r1] @ Clear the exclusive monitor -#elif defined(CONFIG_CPU_32v6K) - clrex -#endif mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR /* diff --git a/arch/arm/mm/abort-ev7.S b/arch/arm/mm/abort-ev7.S index 703375277ba6..4812ad054214 100644 --- a/arch/arm/mm/abort-ev7.S +++ b/arch/arm/mm/abort-ev7.S @@ -13,12 +13,6 @@ */ .align 5 ENTRY(v7_early_abort) - /* - * The effect of data aborts on on the exclusive access monitor are - * UNPREDICTABLE. Do a CLREX to clear the state - */ - clrex - mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR |