diff options
Diffstat (limited to 'arch/arm')
650 files changed, 22866 insertions, 18128 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 97d07ed60a0b..9f1f09a2bc9b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -29,6 +29,7 @@ config ARM select HANDLE_DOMAIN_IRQ select HARDIRQS_SW_RESEND select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT) + select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6 select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_KGDB select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT) @@ -60,6 +61,7 @@ config ARM select HAVE_MEMBLOCK select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND select HAVE_OPROFILE if (HAVE_PERF_EVENTS) + select HAVE_OPTPROBES if !THUMB2_KERNEL select HAVE_PERF_EVENTS select HAVE_PERF_REGS select HAVE_PERF_USER_STACK_DUMP @@ -858,6 +860,8 @@ source "arch/arm/mach-cns3xxx/Kconfig" source "arch/arm/mach-davinci/Kconfig" +source "arch/arm/mach-digicolor/Kconfig" + source "arch/arm/mach-dove/Kconfig" source "arch/arm/mach-ep93xx/Kconfig" @@ -1279,6 +1283,9 @@ config PCI_DOMAINS bool depends on PCI +config PCI_DOMAINS_GENERIC + def_bool PCI_DOMAINS + config PCI_NANOENGINE bool "BSE nanoEngine PCI support" depends on SA1100_NANOENGINE @@ -1488,7 +1495,7 @@ config ARM_PSCI # selected platforms. config ARCH_NR_GPIO int - default 1024 if ARCH_SHMOBILE || ARCH_TEGRA + default 1024 if ARCH_SHMOBILE || ARCH_TEGRA || ARCH_ZYNQ default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \ SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 default 416 if ARCH_SUNXI diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 5ddd4906f7a7..970de7518341 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -115,16 +115,22 @@ choice 0x80024000 | 0xf0024000 | UART9 config AT91_DEBUG_LL_DBGU0 - bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl" - depends on HAVE_AT91_DBGU0 + bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10, 9rl, 9x5, 9n12" + select DEBUG_AT91_UART + depends on ARCH_AT91 + depends on SOC_AT91RM9200 || SOC_AT91SAM9 config AT91_DEBUG_LL_DBGU1 - bool "Kernel low-level debugging on 9263 and 9g45" - depends on HAVE_AT91_DBGU1 + bool "Kernel low-level debugging on 9263, 9g45 and sama5d3" + select DEBUG_AT91_UART + depends on ARCH_AT91 + depends on SOC_AT91SAM9 || SOC_SAMA5 config AT91_DEBUG_LL_DBGU2 bool "Kernel low-level debugging on sama5d4" - depends on HAVE_AT91_DBGU2 + select DEBUG_AT91_UART + depends on ARCH_AT91 + depends on SOC_SAMA5 config DEBUG_BCM2835 bool "Kernel low-level debugging on BCM2835 PL011 UART" @@ -241,6 +247,13 @@ choice Say Y here if you want the debug print routines to direct their output to the serial port in the DC21285 (Footbridge). + config DEBUG_DIGICOLOR_UA0 + bool "Kernel low-level debugging messages via Digicolor UA0" + depends on ARCH_DIGICOLOR + help + Say Y here if you want the debug print routines to direct + their output to the UA0 serial port in the CX92755. + config DEBUG_FOOTBRIDGE_COM1 bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" depends on FOOTBRIDGE @@ -272,6 +285,14 @@ choice Say Y here if you want the debug print routines to direct their output to the UART on Highbank based devices. + config DEBUG_HIP01_UART + bool "Hisilicon Hip01 Debug UART" + depends on ARCH_HIP01 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on HIP01 UART. + config DEBUG_HIP04_UART bool "Hisilicon HiP04 Debug UART" depends on ARCH_HIP04 @@ -397,6 +418,13 @@ choice Say Y here if you want the debug print routines to direct their output to UART1 serial port on KEYSTONE2 devices. + config DEBUG_KS8695_UART + bool "KS8695 Debug UART" + depends on ARCH_KS8695 + help + Say Y here if you want kernel low-level debugging support + on KS8695. + config DEBUG_MESON_UARTAO bool "Kernel low-level debugging via Meson6 UARTAO" depends on ARCH_MESON @@ -427,7 +455,7 @@ choice Say Y here if you want the debug print routines to direct their output to the serial port on MSM devices. - ARCH DEBUG_UART_PHYS DEBUG_UART_BASE # + ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT # MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1 MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2 MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3 @@ -446,7 +474,8 @@ choice Say Y here if you want the debug print routines to direct their output to the serial port on Qualcomm devices. - ARCH DEBUG_UART_PHYS DEBUG_UART_BASE + ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT + APQ8064 0x16640000 0xf0040000 APQ8084 0xf995e000 0xfa75e000 MSM8X60 0x19c40000 0xf0040000 MSM8960 0x16440000 0xf0040000 @@ -455,13 +484,13 @@ choice Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration options based on your needs. - config DEBUG_MVEBU_UART - bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)" + config DEBUG_MVEBU_UART0 + bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)" depends on ARCH_MVEBU select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support - on MVEBU based platforms. + on MVEBU based platforms on UART0. This option should be used with the old bootloaders that left the internal registers mapped at @@ -474,13 +503,28 @@ choice when u-boot hands over to the kernel, the system silently crashes, with no serial output at all. - config DEBUG_MVEBU_UART_ALTERNATE - bool "Kernel low-level debugging messages via MVEBU UART (new bootloaders)" + config DEBUG_MVEBU_UART0_ALTERNATE + bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)" depends on ARCH_MVEBU select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support - on MVEBU based platforms. + on MVEBU based platforms on UART0. + + This option should be used with the new bootloaders + that remap the internal registers at 0xf1000000. + + If the wrong DEBUG_MVEBU_UART* option is selected, + when u-boot hands over to the kernel, the system + silently crashes, with no serial output at all. + + config DEBUG_MVEBU_UART1_ALTERNATE + bool "Kernel low-level debugging messages via MVEBU UART1 (new bootloaders)" + depends on ARCH_MVEBU + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on MVEBU based platforms on UART1. This option should be used with the new bootloaders that remap the internal registers at 0xf1000000. @@ -496,6 +540,13 @@ choice Say Y here if you want kernel low-level debugging support on Vybrid based platforms. + config DEBUG_NETX_UART + bool "Kernel low-level debugging messages via NetX UART" + depends on ARCH_NETX + help + Say Y here if you want kernel low-level debugging support + on Hilscher NetX based platforms. + config DEBUG_NOMADIK_UART bool "Kernel low-level debugging messages via NOMADIK UART" depends on ARCH_NOMADIK @@ -520,6 +571,30 @@ choice Say Y here if you want kernel low-level debugging support on TI-NSPIRE CX models. + config DEBUG_OMAP1UART1 + bool "Kernel low-level debugging via OMAP1 UART1" + depends on ARCH_OMAP1 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on OMAP1 based platforms (except OMAP730) on the UART1. + + config DEBUG_OMAP1UART2 + bool "Kernel low-level debugging via OMAP1 UART2" + depends on ARCH_OMAP1 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on OMAP1 based platforms (except OMAP730) on the UART2. + + config DEBUG_OMAP1UART3 + bool "Kernel low-level debugging via OMAP1 UART3" + depends on ARCH_OMAP1 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on OMAP1 based platforms (except OMAP730) on the UART3. + config DEBUG_OMAP2UART1 bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)" depends on ARCH_OMAP2PLUS @@ -562,6 +637,30 @@ choice depends on ARCH_OMAP2PLUS select DEBUG_OMAP2PLUS_UART + config DEBUG_OMAP7XXUART1 + bool "Kernel low-level debugging via OMAP730 UART1" + depends on ARCH_OMAP730 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on OMAP730 based platforms on the UART1. + + config DEBUG_OMAP7XXUART2 + bool "Kernel low-level debugging via OMAP730 UART2" + depends on ARCH_OMAP730 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on OMAP730 based platforms on the UART2. + + config DEBUG_OMAP7XXUART3 + bool "Kernel low-level debugging via OMAP730 UART3" + depends on ARCH_OMAP730 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on OMAP730 based platforms on the UART3. + config DEBUG_TI81XXUART1 bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)" depends on ARCH_OMAP2PLUS @@ -916,16 +1015,28 @@ choice config DEBUG_SIRFPRIMA2_UART1 bool "Kernel low-level debugging messages via SiRFprimaII UART1" depends on ARCH_PRIMA2 + select DEBUG_SIRFSOC_UART help Say Y here if you want the debug print routines to direct their output to the uart1 port on SiRFprimaII devices. - config DEBUG_SIRFMARCO_UART1 - bool "Kernel low-level debugging messages via SiRFmarco UART1" - depends on ARCH_MARCO + config DEBUG_SIRFATLAS7_UART0 + bool "Kernel low-level debugging messages via SiRFatlas7 UART0" + depends on ARCH_ATLAS7 + select DEBUG_SIRFSOC_UART + help + Say Y here if you want the debug print routines to direct + their output to the uart0 port on SiRFATLAS7 devices.The uart0 + is used on SiRFATLAS7 as a extra debug port.sometimes an extra + debug port can be very useful. + + config DEBUG_SIRFATLAS7_UART1 + bool "Kernel low-level debugging messages via SiRFatlas7 UART1" + depends on ARCH_ATLAS7 + select DEBUG_SIRFSOC_UART help Say Y here if you want the debug print routines to direct - their output to the uart1 port on SiRFmarco devices. + their output to the uart1 port on SiRFATLAS7 devices. config STIH41X_DEBUG_ASC2 bool "Use StiH415/416 ASC2 UART for low-level debug" @@ -973,7 +1084,7 @@ choice for Mediatek mt6589 based platforms on UART0. config DEBUG_MT8127_UART0 - bool "Mediatek mt8127 UART0" + bool "Mediatek mt8127/mt6592 UART0" depends on ARCH_MEDIATEK select DEBUG_UART_8250 help @@ -1031,15 +1142,6 @@ choice This option selects UART0 on VIA/Wondermedia System-on-a-chip devices, including VT8500, WM8505, WM8650 and WM8850. - config DEBUG_LL_UART_NONE - bool "No low-level debugging UART" - depends on !ARCH_MULTIPLATFORM - help - Say Y here if your platform doesn't provide a UART option - above. This relies on your platform choosing the right UART - definition internally in order for low-level debugging to - work. - config DEBUG_ICEDCC bool "Kernel low-level debugging via EmbeddedICE DCC channel" help @@ -1109,6 +1211,10 @@ choice endchoice +config DEBUG_AT91_UART + bool + depends on ARCH_AT91 + config DEBUG_EXYNOS_UART bool @@ -1161,10 +1267,15 @@ config DEBUG_STI_UART bool depends on ARCH_STI +config DEBUG_SIRFSOC_UART + bool + depends on ARCH_SIRF + config DEBUG_LL_INCLUDE string default "debug/sa1100.S" if DEBUG_SA1100 default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 + default "debug/at91.S" if DEBUG_AT91_UART default "debug/asm9260.S" if DEBUG_ASM9260_UART default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2 default "debug/meson.S" if DEBUG_MESON_UARTAO @@ -1183,7 +1294,9 @@ config DEBUG_LL_INCLUDE DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART || \ DEBUG_IMX6SX_UART + default "debug/ks8695.S" if DEBUG_KS8695_UART default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM + default "debug/netx.S" if DEBUG_NETX_UART default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0 @@ -1195,7 +1308,7 @@ config DEBUG_LL_INCLUDE default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4 default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART default "debug/s5pv210.S" if DEBUG_S5PV210_UART - default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 + default "debug/sirf.S" if DEBUG_SIRFSOC_UART default "debug/sti.S" if DEBUG_STI_UART default "debug/tegra.S" if DEBUG_TEGRA_UART default "debug/ux500.S" if DEBUG_UX500_UART @@ -1204,16 +1317,12 @@ config DEBUG_LL_INCLUDE default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX + default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0 default "mach/debug-macro.S" # Compatibility options for PL01x config DEBUG_UART_PL01X - def_bool ARCH_EP93XX || \ - ARCH_INTEGRATOR || \ - ARCH_SPEAR3XX || \ - ARCH_SPEAR6XX || \ - ARCH_SPEAR13XX || \ - ARCH_VERSATILE + bool # Compatibility options for 8250 config DEBUG_UART_8250 @@ -1229,6 +1338,7 @@ config DEBUG_UART_BCM63XX config DEBUG_UART_PHYS hex "Physical base address of debug UART" + default 0x00100a00 if DEBUG_NETX_UART default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0 default 0x01c28000 if DEBUG_SUNXI_UART0 default 0x01c28400 if DEBUG_SUNXI_UART1 @@ -1251,7 +1361,10 @@ config DEBUG_UART_PHYS default 0x11009000 if DEBUG_MT8135_UART3 default 0x16000000 if ARCH_INTEGRATOR default 0x18000300 if DEBUG_BCM_5301X + default 0x18010000 if DEBUG_SIRFATLAS7_UART0 + default 0x18020000 if DEBUG_SIRFATLAS7_UART1 default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 + default 0x20001000 if DEBUG_HIP01_UART default 0x20060000 if DEBUG_RK29_UART0 default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 @@ -1269,7 +1382,6 @@ config DEBUG_UART_PHYS DEBUG_S3C2410_UART2) default 0x78000000 if DEBUG_CNS3XXX default 0x7c0003f8 if FOOTBRIDGE - default 0x78000000 if DEBUG_CNS3XXX default 0x80010000 if DEBUG_ASM9260_UART default 0x80070000 if DEBUG_IMX23_UART default 0x80074000 if DEBUG_IMX28_UART @@ -1277,12 +1389,13 @@ config DEBUG_UART_PHYS default 0x808c0000 if ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART default 0xa9a00000 if DEBUG_MSM_UART + default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1 default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX default 0xc0013000 if DEBUG_U300_UART default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX - default 0xd0012000 if DEBUG_MVEBU_UART + default 0xd0012000 if DEBUG_MVEBU_UART0 default 0xc81004c0 if DEBUG_MESON_UARTAO default 0xd4017000 if DEBUG_MMP_UART2 default 0xd4018000 if DEBUG_MMP_UART3 @@ -1296,7 +1409,8 @@ config DEBUG_UART_PHYS default 0xe8008000 if DEBUG_R7S72100_SCIF2 default 0xf0000be0 if ARCH_EBSA110 default 0xf040ab00 if DEBUG_BRCMSTB_UART - default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE + default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE + default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_ORION5X default 0xf7fc9000 if DEBUG_BERLIN_UART @@ -1310,20 +1424,27 @@ config DEBUG_UART_PHYS default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0 default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2 default 0xfff36000 if DEBUG_HIGHBANK_UART + default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 + default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 + default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 default 0xfffe8600 if DEBUG_UART_BCM63XX default 0xfffff700 if ARCH_IOP33X - depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ + depends on ARCH_EP93XX || \ + DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_LL_UART_EFM32 || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ - DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \ + DEBUG_MSM_UART || DEBUG_NETX_UART || \ + DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \ DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \ DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \ DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ - DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART + DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \ + DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 config DEBUG_UART_VIRT hex "Virtual base address of debug UART" + default 0xe0000a00 if DEBUG_NETX_UART default 0xe0010fe0 if ARCH_RPC default 0xe1000000 if DEBUG_MSM_UART default 0xf0000be0 if ARCH_EBSA110 @@ -1377,8 +1498,12 @@ config DEBUG_UART_VIRT default 0xfeb30c00 if DEBUG_KEYSTONE_UART0 default 0xfeb31000 if DEBUG_KEYSTONE_UART1 default 0xfec02000 if DEBUG_SOCFPGA_UART - default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE + default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE + default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE + default 0xfec10000 if DEBUG_SIRFATLAS7_UART0 default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 + default 0xfec20000 if DEBUG_SIRFATLAS7_UART1 + default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1 default 0xfec90000 if DEBUG_RK32_UART2 default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 @@ -1392,18 +1517,25 @@ config DEBUG_UART_VIRT default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xfef36000 if DEBUG_HIGHBANK_UART + default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 + default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 + default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 default 0xfefff700 if ARCH_IOP33X default 0xff003000 if DEBUG_U300_UART + default 0xffd01000 if DEBUG_HIP01_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ - DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ - DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART + DEBUG_MSM_UART || DEBUG_NETX_UART || \ + DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ + DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \ + DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 - default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X + default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X || \ + DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3 default 2 config DEBUG_UART_8250_WORD diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c1785eec2cf7..eb7bb511f853 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -150,6 +150,7 @@ machine-$(CONFIG_ARCH_BERLIN) += berlin machine-$(CONFIG_ARCH_CLPS711X) += clps711x machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx machine-$(CONFIG_ARCH_DAVINCI) += davinci +machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor machine-$(CONFIG_ARCH_DOVE) += dove machine-$(CONFIG_ARCH_EBSA110) += ebsa110 machine-$(CONFIG_ARCH_EFM32) += efm32 @@ -266,6 +267,7 @@ core-$(CONFIG_KVM_ARM_HOST) += arch/arm/kvm/ # If we have a machine-specific directory, then include it in the build. core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ +core-y += arch/arm/probes/ core-y += arch/arm/net/ core-y += arch/arm/crypto/ core-y += arch/arm/firmware/ diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 132c70e2d2f1..c41a793b519c 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -178,7 +178,7 @@ not_angel: /* * Set up a page table only if it won't overwrite ourself. - * That means r4 < pc && r4 - 16k page directory > &_end. + * That means r4 < pc || r4 - 16k page directory > &_end. * Given that r4 > &_end is most unfrequent, we add a rough * additional 1MB of room for a possible appended DTB. */ diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 91bd5bd62857..a1c776b8dcec 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1,83 +1,91 @@ ifeq ($(CONFIG_OF),y) +dtb-$(CONFIG_MACH_ASM9260) += \ + alphascale-asm9260-devkit.dtb # Keep at91 dtb files sorted alphabetically for each SoC -# rm9200 -dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb -dtb-$(CONFIG_ARCH_AT91) += mpa1600.dtb -# sam9260 -dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb -dtb-$(CONFIG_ARCH_AT91) += at91-qil_a9260.dtb -dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb -dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb -dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb -dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb -dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb -# sam9261 -dtb-$(CONFIG_ARCH_AT91) += at91sam9261ek.dtb -# sam9263 -dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb -dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb -dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb -# sam9g20 -dtb-$(CONFIG_ARCH_AT91) += at91-foxg20.dtb -dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb -dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb -dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb -dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb -dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb -dtb-$(CONFIG_ARCH_AT91) += usb_a9g20_lpw.dtb -# sam9g45 -dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb -dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb -# sam9n12 -dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb -# sam9rl -dtb-$(CONFIG_ARCH_AT91) += at91sam9rlek.dtb -# sam9x5 -dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb -dtb-$(CONFIG_ARCH_AT91) += at91-cosino_mega2560.dtb -dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb -dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb -dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb -dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb -dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb -# sama5d3 -dtb-$(CONFIG_ARCH_AT91) += at91-sama5d3_xplained.dtb -dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb -dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb -dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb -dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb -dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb -# sama5d4 -dtb-$(CONFIG_ARCH_AT91) += at91-sama5d4ek.dtb - -dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb -dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb -dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb -dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b-plus.dtb +dtb-$(CONFIG_SOC_SAM_V4_V5) += \ + at91rm9200ek.dtb \ + mpa1600.dtb \ + animeo_ip.dtb \ + at91-qil_a9260.dtb \ + aks-cdu.dtb \ + ethernut5.dtb \ + evk-pro3.dtb \ + tny_a9260.dtb \ + usb_a9260.dtb \ + at91sam9261ek.dtb \ + at91sam9263ek.dtb \ + tny_a9263.dtb \ + usb_a9263.dtb \ + at91-foxg20.dtb \ + at91sam9g20ek.dtb \ + at91sam9g20ek_2mmc.dtb \ + kizbox.dtb \ + tny_a9g20.dtb \ + usb_a9g20.dtb \ + usb_a9g20_lpw.dtb \ + at91sam9m10g45ek.dtb \ + pm9g45.dtb \ + at91sam9n12ek.dtb \ + at91sam9rlek.dtb \ + at91-ariag25.dtb \ + at91-cosino_mega2560.dtb \ + at91sam9g15ek.dtb \ + at91sam9g25ek.dtb \ + at91sam9g35ek.dtb \ + at91sam9x25ek.dtb \ + at91sam9x35ek.dtb +dtb-$(CONFIG_SOC_SAM_V7) += \ + at91-sama5d3_xplained.dtb \ + sama5d31ek.dtb \ + sama5d33ek.dtb \ + sama5d34ek.dtb \ + sama5d35ek.dtb \ + sama5d36ek.dtb \ + at91-sama5d4ek.dtb +dtb-$(CONFIG_ARCH_ATLAS6) += \ + atlas6-evb.dtb +dtb-$(CONFIG_ARCH_ATLAS7) += \ + atlas7-evb.dtb +dtb-$(CONFIG_ARCH_AXXIA) += \ + axm5516-amarillo.dtb +dtb-$(CONFIG_ARCH_BCM2835) += \ + bcm2835-rpi-b.dtb \ + bcm2835-rpi-b-plus.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-buffalo-wzr-1750dhp.dtb \ + bcm4708-luxul-xwc-1000.dtb \ bcm4708-netgear-r6250.dtb \ bcm4708-netgear-r6300-v2.dtb \ bcm47081-asus-rt-n18u.dtb \ - bcm47081-buffalo-wzr-600dhp2.dtb -dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb -dtb-$(CONFIG_ARCH_BCM_CYGNUS) += bcm911360_entphn.dtb \ + bcm47081-buffalo-wzr-600dhp2.dtb \ + bcm47081-buffalo-wzr-900dhp.dtb +dtb-$(CONFIG_ARCH_BCM_63XX) += \ + bcm963138dvt.dtb +dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \ + bcm911360_entphn.dtb \ bcm911360k.dtb \ bcm958300k.dtb -dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ +dtb-$(CONFIG_ARCH_BCM_MOBILE) += \ + bcm28155-ap.dtb \ bcm21664-garnet.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ - berlin2-sony-nsz-gs7.dtb \ - berlin2cd-google-chromecast.dtb \ + berlin2-sony-nsz-gs7.dtb \ + berlin2cd-google-chromecast.dtb \ berlin2q-marvell-dmp.dtb dtb-$(CONFIG_ARCH_BRCMSTB) += \ bcm7445-bcm97445svmb.dtb -dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ +dtb-$(CONFIG_ARCH_DAVINCI) += \ + da850-enbw-cmc.dtb \ da850-evm.dtb -dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb -dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \ - exynos3250-rinato.dtb \ +dtb-$(CONFIG_ARCH_DIGICOLOR) += \ + cx92755_equinox.dtb +dtb-$(CONFIG_ARCH_EFM32) += \ + efm32gg-dk3750.dtb +dtb-$(CONFIG_ARCH_EXYNOS3) += \ + exynos3250-monk.dtb \ + exynos3250-rinato.dtb +dtb-$(CONFIG_ARCH_EXYNOS4) += \ exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ @@ -88,7 +96,8 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \ exynos4412-origen.dtb \ exynos4412-smdk4412.dtb \ exynos4412-tiny4412.dtb \ - exynos4412-trats2.dtb \ + exynos4412-trats2.dtb +dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5250-arndale.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ @@ -98,20 +107,31 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \ exynos5420-arndale-octa.dtb \ exynos5420-peach-pit.dtb \ exynos5420-smdk5420.dtb \ + exynos5422-odroidxu3.dtb \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb \ exynos5800-peach-pi.dtb -dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb -dtb-$(CONFIG_ARCH_HIX5HD2) += hisi-x5hd2-dkb.dtb -dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ +dtb-$(CONFIG_ARCH_HI3xxx) += \ + hi3620-hi4511.dtb +dtb-$(CONFIG_ARCH_HIX5HD2) += \ + hisi-x5hd2-dkb.dtb +dtb-$(CONFIG_ARCH_HIGHBANK) += \ + highbank.dtb \ ecx-2000.dtb -dtb-$(CONFIG_ARCH_HIP04) += hip04-d01.dtb -dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ +dtb-$(CONFIG_ARCH_HIP01) += \ + hip01-ca9x2.dtb +dtb-$(CONFIG_ARCH_HIP04) += \ + hip04-d01.dtb +dtb-$(CONFIG_ARCH_INTEGRATOR) += \ + integratorap.dtb \ integratorcp.dtb -dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \ +dtb-$(CONFIG_ARCH_KEYSTONE) += \ + k2hk-evm.dtb \ k2l-evm.dtb \ k2e-evm.dtb -dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \ +dtb-$(CONFIG_MACH_KIRKWOOD) += \ + kirkwood-b3.dtb \ + kirkwood-blackarmor-nas220.dtb \ kirkwood-cloudbox.dtb \ kirkwood-d2net.dtb \ kirkwood-db-88f6281.dtb \ @@ -160,6 +180,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \ kirkwood-openrd-base.dtb \ kirkwood-openrd-client.dtb \ kirkwood-openrd-ultimate.dtb \ + kirkwood-pogo_e02.dtb \ kirkwood-rd88f6192.dtb \ kirkwood-rd88f6281-z0.dtb \ kirkwood-rd88f6281-a.dtb \ @@ -174,37 +195,47 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \ kirkwood-ts219-6282.dtb \ kirkwood-ts419-6281.dtb \ kirkwood-ts419-6282.dtb -dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb -dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb -dtb-$(CONFIG_MACH_MESON6) += meson6-atv1200.dtb -dtb-$(CONFIG_ARCH_MMP) += pxa168-aspenite.dtb \ +dtb-$(CONFIG_ARCH_LPC32XX) += \ + ea3250.dtb phy3250.dtb +dtb-$(CONFIG_MACH_MESON6) += \ + meson6-atv1200.dtb +dtb-$(CONFIG_ARCH_MMP) += \ + pxa168-aspenite.dtb \ pxa910-dkb.dtb \ mmp2-brownstone.dtb -dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb -dtb-$(CONFIG_ARCH_MXC) += \ +dtb-$(CONFIG_ARCH_MOXART) += \ + moxart-uc7112lx.dtb +dtb-$(CONFIG_SOC_IMX1) += \ imx1-ads.dtb \ - imx1-apf9328.dtb \ + imx1-apf9328.dtb +dtb-$(CONFIG_SOC_IMX25) += \ imx25-eukrea-mbimxsd25-baseboard.dtb \ imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \ imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \ imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \ imx25-karo-tx25.dtb \ - imx25-pdk.dtb \ + imx25-pdk.dtb +dtb-$(CONFIG_SOC_IMX31) += \ imx27-apf27.dtb \ imx27-apf27dev.dtb \ imx27-eukrea-mbimxsd27-baseboard.dtb \ imx27-pdk.dtb \ imx27-phytec-phycore-rdk.dtb \ - imx27-phytec-phycard-s-rdk.dtb \ - imx31-bug.dtb \ + imx27-phytec-phycard-s-rdk.dtb +dtb-$(CONFIG_SOC_IMX31) += \ + imx31-bug.dtb +dtb-$(CONFIG_SOC_IMX35) += \ imx35-eukrea-mbimxsd35-baseboard.dtb \ - imx35-pdk.dtb \ - imx50-evk.dtb \ + imx35-pdk.dtb +dtb-$(CONFIG_SOC_IMX50) += \ + imx50-evk.dtb +dtb-$(CONFIG_SOC_IMX51) += \ imx51-apf51.dtb \ imx51-apf51dev.dtb \ imx51-babbage.dtb \ imx51-digi-connectcore-jsk.dtb \ - imx51-eukrea-mbimxsd51-baseboard.dtb \ + imx51-eukrea-mbimxsd51-baseboard.dtb +dtb-$(CONFIG_SOC_IMX53) += \ imx53-ard.dtb \ imx53-m53evk.dtb \ imx53-mba53.dtb \ @@ -213,7 +244,8 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx53-smd.dtb \ imx53-tx53-x03x.dtb \ imx53-tx53-x13x.dtb \ - imx53-voipac-bsb.dtb \ + imx53-voipac-bsb.dtb +dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-aristainetos_4.dtb \ imx6dl-aristainetos_7.dtb \ imx6dl-cubox-i.dtb \ @@ -234,6 +266,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6dl-tx6dl-comtft.dtb \ imx6dl-tx6u-801x.dtb \ imx6dl-tx6u-811x.dtb \ + imx6dl-udoo.dtb \ imx6dl-wandboard.dtb \ imx6dl-wandboard-revb1.dtb \ imx6q-arm2.dtb \ @@ -257,23 +290,29 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-sabresd.dtb \ imx6q-sbc6x.dtb \ imx6q-tbs2910.dtb \ - imx6q-udoo.dtb \ - imx6q-wandboard.dtb \ - imx6q-wandboard-revb1.dtb \ imx6q-tx6q-1010.dtb \ imx6q-tx6q-1010-comtft.dtb \ imx6q-tx6q-1020.dtb \ imx6q-tx6q-1020-comtft.dtb \ imx6q-tx6q-1110.dtb \ - imx6sl-evk.dtb \ - imx6sx-sdb.dtb \ + imx6q-udoo.dtb \ + imx6q-wandboard.dtb \ + imx6q-wandboard-revb1.dtb +dtb-$(CONFIG_SOC_IMX6SL) += \ + imx6sl-evk.dtb +dtb-$(CONFIG_SOC_IMX6SX) += \ + imx6sx-sabreauto.dtb \ + imx6sx-sdb.dtb +dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-qds.dtb \ - ls1021a-twr.dtb \ + ls1021a-twr.dtb +dtb-$(CONFIG_SOC_VF610) += \ vf500-colibri-eval-v3.dtb \ vf610-colibri-eval-v3.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb -dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ +dtb-$(CONFIG_ARCH_MXS) += \ + imx23-evk.dtb \ imx23-olinuxino.dtb \ imx23-stmp378x_devb.dtb \ imx28-apf28.dtb \ @@ -294,17 +333,21 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-m28evk.dtb \ imx28-sps1.dtb \ imx28-tx28.dtb -dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb \ +dtb-$(CONFIG_ARCH_NOMADIK) += \ + ste-nomadik-s8815.dtb \ ste-nomadik-nhk15.dtb -dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \ +dtb-$(CONFIG_ARCH_NSPIRE) += \ + nspire-cx.dtb \ nspire-tp.dtb \ nspire-clp.dtb -dtb-$(CONFIG_ARCH_OMAP2) += omap2420-h4.dtb \ +dtb-$(CONFIG_ARCH_OMAP2) += \ + omap2420-h4.dtb \ omap2420-n800.dtb \ omap2420-n810.dtb \ omap2420-n810-wimax.dtb \ omap2430-sdp.dtb -dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \ +dtb-$(CONFIG_ARCH_OMAP3) += \ + am3517-craneboard.dtb \ am3517-evm.dtb \ am3517_mt_ventoux.dtb \ omap3430-sdp.dtb \ @@ -348,7 +391,10 @@ dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \ omap3-sbc-t3730.dtb \ omap3-thunder.dtb \ omap3-zoom3.dtb -dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \ +dtb-$(CONFIG_SOC_TI81XX) += \ + dm8168-evm.dtb +dtb-$(CONFIG_SOC_AM33XX) += \ + am335x-base0033.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ am335x-evm.dtb \ @@ -356,7 +402,8 @@ dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \ am335x-nano.dtb \ am335x-pepper.dtb \ am335x-lxm.dtb -dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \ +dtb-$(CONFIG_ARCH_OMAP4) += \ + omap4-duovero-parlor.dtb \ omap4-panda.dtb \ omap4-panda-a4.dtb \ omap4-panda-es.dtb \ @@ -364,20 +411,26 @@ dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \ omap4-sdp-es23plus.dtb \ omap4-var-dvk-om44.dtb \ omap4-var-stk-om44.dtb -dtb-$(CONFIG_SOC_AM43XX) += am43x-epos-evm.dtb \ +dtb-$(CONFIG_SOC_AM43XX) += \ + am43x-epos-evm.dtb \ am437x-sk-evm.dtb \ + am437x-idk-evm.dtb \ am437x-gp-evm.dtb -dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \ +dtb-$(CONFIG_SOC_OMAP5) += \ + omap5-cm-t54.dtb \ omap5-sbc-t54.dtb \ omap5-uevm.dtb -dtb-$(CONFIG_SOC_DRA7XX) += dra7-evm.dtb \ +dtb-$(CONFIG_SOC_DRA7XX) += \ + dra7-evm.dtb \ am57xx-beagle-x15.dtb \ dra72-evm.dtb -dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \ +dtb-$(CONFIG_ARCH_ORION5X) += \ + orion5x-lacie-d2-network.dtb \ orion5x-lacie-ethernet-disk-mini-v2.dtb \ orion5x-maxtor-shared-storage-2.dtb \ orion5x-rd88f5182-nas.dtb -dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb +dtb-$(CONFIG_ARCH_PRIMA2) += \ + prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ @@ -388,17 +441,24 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-sony-xperia-honami.dtb -dtb-$(CONFIG_ARCH_REALVIEW) += arm-realview-pb1176.dtb +dtb-$(CONFIG_ARCH_REALVIEW) += \ + arm-realview-pb1176.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3066a-bqcurie2.dtb \ rk3066a-marsboard.dtb \ + rk3066a-rayeager.dtb \ rk3188-radxarock.dtb \ rk3288-evb-act8846.dtb \ - rk3288-evb-rk808.dtb -dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb -dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \ + rk3288-evb-rk808.dtb \ + rk3288-firefly-beta.dtb \ + rk3288-firefly.dtb +dtb-$(CONFIG_ARCH_S3C24XX) += \ + s3c2416-smdk2416.dtb +dtb-$(CONFIG_ARCH_S3C64XX) += \ + s3c6410-mini6410.dtb \ s3c6410-smdk6410.dtb -dtb-$(CONFIG_ARCH_S5PV210) += s5pv210-aquila.dtb \ +dtb-$(CONFIG_ARCH_S5PV210) += \ + s5pv210-aquila.dtb \ s5pv210-goni.dtb \ s5pv210-smdkc110.dtb \ s5pv210-smdkv210.dtb \ @@ -410,48 +470,61 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \ r8a7778-bockw.dtb \ r8a7778-bockw-reference.dtb \ r8a7779-marzen.dtb \ - r8a7790-lager.dtb \ sh7372-mackerel.dtb \ sh73a0-kzm9g.dtb \ sh73a0-kzm9g-reference.dtb -dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ +dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ + emev2-kzm9d.dtb \ r7s72100-genmai.dtb \ + r8a73a4-ape6evm.dtb \ r8a7740-armadillo800eva.dtb \ r8a7779-marzen.dtb \ r8a7790-lager.dtb \ r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ r8a7794-alt.dtb -dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \ +dtb-$(CONFIG_ARCH_SOCFPGA) += \ + socfpga_arria5_socdk.dtb \ socfpga_arria10_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_sockit.dtb \ socfpga_cyclone5_socrates.dtb \ socfpga_vt.dtb -dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \ +dtb-$(CONFIG_ARCH_SPEAR13XX) += \ + spear1310-evb.dtb \ spear1340-evb.dtb -dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ +dtb-$(CONFIG_ARCH_SPEAR3XX) += \ + spear300-evb.dtb \ spear310-evb.dtb \ spear320-evb.dtb \ spear320-hmi.dtb -dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb -dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \ +dtb-$(CONFIG_ARCH_SPEAR6XX) += \ + spear600-evb.dtb +dtb-$(CONFIG_ARCH_STI) += \ + stih407-b2120.dtb \ stih410-b2120.dtb \ stih415-b2000.dtb \ stih415-b2020.dtb \ stih416-b2000.dtb \ stih416-b2020.dtb \ - stih416-b2020e.dtb + stih416-b2020e.dtb \ + stih418-b2199.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ + sun4i-a10-chuwi-v7-cw0825.dtb \ sun4i-a10-cubieboard.dtb \ + sun4i-a10-marsboard.dtb \ sun4i-a10-mini-xplus.dtb \ + sun4i-a10-mk802.dtb \ + sun4i-a10-mk802ii.dtb \ sun4i-a10-hackberry.dtb \ + sun4i-a10-hyundai-a7hd.dtb \ sun4i-a10-inet97fv2.dtb \ sun4i-a10-olinuxino-lime.dtb \ sun4i-a10-pcduino.dtb dtb-$(CONFIG_MACH_SUN5I) += \ + sun5i-a10s-mk802.dtb \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a10s-r7-tv-dongle.dtb \ sun5i-a13-hsg-h702.dtb \ @@ -461,9 +534,11 @@ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-app4-evb1.dtb \ sun6i-a31-colombus.dtb \ sun6i-a31-hummingbird.dtb \ - sun6i-a31-m9.dtb + sun6i-a31-m9.dtb \ + sun6i-a31s-cs908.dtb dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-bananapi.dtb \ + sun7i-a20-bananapro.dtb \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ sun7i-a20-hummingbird.dtb \ @@ -474,10 +549,12 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-olinuxino-micro.dtb \ sun7i-a20-pcduino3.dtb dtb-$(CONFIG_MACH_SUN8I) += \ - sun8i-a23-ippo-q8h-v5.dtb + sun8i-a23-ippo-q8h-v5.dtb \ + sun8i-a23-ippo-q8h-v1.2.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb -dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ + tegra20-harmony.dtb \ tegra20-iris-512.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ @@ -486,34 +563,43 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-tec.dtb \ tegra20-trimslice.dtb \ tegra20-ventana.dtb \ - tegra20-whistler.dtb \ + tegra20-whistler.dtb +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-apalis-eval.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ - tegra30-colibri-eval-v3.dtb \ + tegra30-colibri-eval-v3.dtb +dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \ tegra114-dalmore.dtb \ tegra114-roth.dtb \ - tegra114-tn7.dtb \ + tegra114-tn7.dtb +dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \ tegra124-jetson-tk1.dtb \ tegra124-nyan-big.dtb \ tegra124-venice2.dtb -dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb -dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ +dtb-$(CONFIG_ARCH_U300) += \ + ste-u300.dtb +dtb-$(CONFIG_ARCH_U8500) += \ + ste-snowball.dtb \ ste-hrefprev60-stuib.dtb \ ste-hrefprev60-tvk.dtb \ ste-hrefv60plus-stuib.dtb \ ste-hrefv60plus-tvk.dtb \ ste-ccu8540.dtb \ ste-ccu9540.dtb -dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ +dtb-$(CONFIG_ARCH_VERSATILE) += \ + versatile-ab.dtb \ versatile-pb.dtb -dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ +dtb-$(CONFIG_ARCH_VEXPRESS) += \ + vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ vexpress-v2p-ca15-tc1.dtb \ vexpress-v2p-ca15_a7.dtb -dtb-$(CONFIG_ARCH_VIRT) += xenvm-4.2.dtb -dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ +dtb-$(CONFIG_ARCH_VIRT) += \ + xenvm-4.2.dtb +dtb-$(CONFIG_ARCH_VT8500) += \ + vt8500-bv07.dtb \ wm8505-ref.dtb \ wm8650-mid.dtb \ wm8750-apc8750.dtb \ @@ -534,8 +620,10 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ dtb-$(CONFIG_MACH_ARMADA_375) += \ armada-375-db.dtb dtb-$(CONFIG_MACH_ARMADA_38X) += \ - armada-385-db.dtb \ - armada-385-rd.dtb + armada-385-db-ap.dtb \ + armada-388-db.dtb \ + armada-388-gp.dtb \ + armada-388-rd.dtb dtb-$(CONFIG_MACH_ARMADA_XP) += \ armada-xp-axpwifiap.dtb \ armada-xp-db.dtb \ @@ -545,17 +633,18 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ armada-xp-netgear-rn2120.dtb \ armada-xp-openblocks-ax3-4.dtb \ armada-xp-synology-ds414.dtb -dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \ +dtb-$(CONFIG_MACH_DOVE) += \ + dove-cm-a510.dtb \ dove-cubox.dtb \ dove-cubox-es.dtb \ dove-d2plug.dtb \ dove-d3plug.dtb \ dove-dove-db.dtb -dtb-$(CONFIG_ARCH_MEDIATEK) += mt6589-aquaris5.dtb \ +dtb-$(CONFIG_ARCH_MEDIATEK) += \ + mt6589-aquaris5.dtb \ mt6592-evb.dtb \ mt8127-moose.dtb \ mt8135-evbp1.dtb - endif always := $(dtb-y) diff --git a/arch/arm/boot/dts/alphascale-asm9260-devkit.dts b/arch/arm/boot/dts/alphascale-asm9260-devkit.dts new file mode 100644 index 000000000000..c77e2c902fb6 --- /dev/null +++ b/arch/arm/boot/dts/alphascale-asm9260-devkit.dts @@ -0,0 +1,13 @@ +/* + * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de> + * + * Licensed under the X11 license or the GPL v2 (or later) + */ + +/dts-v1/; +#include "alphascale-asm9260.dtsi" + +/ { + model = "Alphascale asm9260 Development Kit"; + compatible = "alphascale,asm9260devkit", "alphascale,asm9260"; +}; diff --git a/arch/arm/boot/dts/alphascale-asm9260.dtsi b/arch/arm/boot/dts/alphascale-asm9260.dtsi new file mode 100644 index 000000000000..907fc7bfc418 --- /dev/null +++ b/arch/arm/boot/dts/alphascale-asm9260.dtsi @@ -0,0 +1,63 @@ +/* + * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de> + * + * Licensed under the X11 license or the GPL v2 (or later) + */ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/alphascale,asm9260.h> + +/ { + interrupt-parent = <&icoll>; + + memory { + device_type = "memory"; + reg = <0x20000000 0x2000000>; + }; + + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + clocks = <&acc CLKID_SYS_CPU>; + }; + }; + + osc24m: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-accuracy = <30000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + acc: clock-controller@80040000 { + compatible = "alphascale,asm9260-clock-controller"; + #clock-cells = <1>; + clocks = <&osc24m>; + reg = <0x80040000 0x204>; + }; + + icoll: interrupt-controller@80054000 { + compatible = "alphascale,asm9260-icoll"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x80054000 0x200>; + }; + + timer0: timer@80088000 { + compatible = "alphascale,asm9260-timer"; + reg = <0x80088000 0x4000>; + clocks = <&acc CLKID_AHB_TIMER0>; + interrupts = <29>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 6cc25ed912ee..c3255e0c90aa 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -195,6 +195,7 @@ &usb0 { status = "okay"; + dr_mode = "peripheral"; }; &usb1 { @@ -300,3 +301,11 @@ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; cd-inverted; }; + +&aes { + status = "okay"; +}; + +&sham { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 83d40f7655e5..6b8493720424 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -24,11 +24,3 @@ &mmc1 { vmmc-supply = <&ldo3_reg>; }; - -&sham { - status = "okay"; -}; - -&aes { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts index 7266a00aab2e..5c5667a3624d 100644 --- a/arch/arm/boot/dts/am335x-lxm.dts +++ b/arch/arm/boot/dts/am335x-lxm.dts @@ -328,6 +328,10 @@ dual_emac_res_vlan = <3>; }; +&phy_sel { + rmii-clock-ext; +}; + &mac { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi index 712edce7d6fb..071b56aa0c7e 100644 --- a/arch/arm/boot/dts/am33xx-clocks.dtsi +++ b/arch/arm/boot/dts/am33xx-clocks.dtsi @@ -99,7 +99,7 @@ ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <0>; reg = <0x0664>; }; @@ -107,7 +107,7 @@ ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <1>; reg = <0x0664>; }; @@ -115,7 +115,7 @@ ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <2>; reg = <0x0664>; }; diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index 5a452fdd7c5d..c90724bded10 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -31,6 +31,7 @@ status = "disabled"; reg = <0x5c000000 0x30000>; interrupts = <67 68 69 70>; + syscon = <&omap3_scm_general>; ti,davinci-ctrl-reg-offset = <0x10000>; ti,davinci-ctrl-mod-reg-offset = <0>; ti,davinci-ctrl-ram-offset = <0x20000>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index b62a1cd776cd..1943fc333e7c 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -948,6 +948,22 @@ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + vpfe0: vpfe@48326000 { + compatible = "ti,am437x-vpfe"; + reg = <0x48326000 0x2000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "vpfe0"; + status = "disabled"; + }; + + vpfe1: vpfe@48328000 { + compatible = "ti,am437x-vpfe"; + reg = <0x48328000 0x2000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "vpfe1"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 7eaae4cf9f89..f84d9715a4a9 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -268,6 +268,78 @@ 0x184 (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */ >; }; + + vpfe0_pins_default: vpfe0_pins_default { + pinctrl-single,pins = < + 0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ + 0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/ + 0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/ + 0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/ + 0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/ + 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/ + 0x20C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/ + 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/ + 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/ + 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/ + 0x21C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/ + 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/ + 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/ + >; + }; + + vpfe0_pins_sleep: vpfe0_pins_sleep { + pinctrl-single,pins = < + 0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/ + 0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/ + 0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/ + 0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/ + 0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/ + 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/ + 0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/ + 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/ + 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/ + 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/ + 0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/ + 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/ + 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/ + >; + }; + + vpfe1_pins_default: vpfe1_pins_default { + pinctrl-single,pins = < + 0x1CC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/ + 0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/ + 0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/ + 0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/ + 0x1DC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/ + 0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/ + 0x1EC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/ + 0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/ + 0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/ + 0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/ + 0x1FC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/ + 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/ + 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/ + >; + }; + + vpfe1_pins_sleep: vpfe1_pins_sleep { + pinctrl-single,pins = < + 0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/ + 0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/ + 0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/ + 0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/ + 0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/ + 0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/ + 0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/ + 0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/ + 0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/ + 0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/ + 0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/ + 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/ + 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/ + >; + }; }; &i2c0 { @@ -545,3 +617,37 @@ pinctrl-0 = <&dcan1_default>; status = "okay"; }; + +&vpfe0 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&vpfe0_pins_default>; + pinctrl-1 = <&vpfe0_pins_sleep>; + + port { + vpfe0_ep: endpoint { + /* remote-endpoint = <&sensor>; add once we have it */ + ti,am437x-vpfe-interface = <0>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; +}; + +&vpfe1 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&vpfe1_pins_default>; + pinctrl-1 = <&vpfe1_pins_sleep>; + + port { + vpfe1_ep: endpoint { + /* remote-endpoint = <&sensor>; add once we have it */ + ti,am437x-vpfe-interface = <0>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts new file mode 100644 index 000000000000..0198f5a62b96 --- /dev/null +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -0,0 +1,384 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "am4372.dtsi" +#include <dt-bindings/pinctrl/am43xx.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "TI AM437x Industrial Development Kit"; + compatible = "ti,am437x-idk-evm","ti,am4372","ti,am43"; + + v24_0d: fixed-regulator-v24_0d { + compatible = "regulator-fixed"; + regulator-name = "V24_0D"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + regulator-always-on; + regulator-boot-on; + }; + + v3_3d: fixed-regulator-v3_3d { + compatible = "regulator-fixed"; + regulator-name = "V3_3D"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&v24_0d>; + }; + + vdd_corereg: fixed-regulator-vdd_corereg { + compatible = "regulator-fixed"; + regulator-name = "VDD_COREREG"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&v24_0d>; + }; + + vdd_core: fixed-regulator-vdd_core { + compatible = "regulator-fixed"; + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_corereg>; + }; + + v1_8dreg: fixed-regulator-v1_8dreg{ + compatible = "regulator-fixed"; + regulator-name = "V1_8DREG"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&v24_0d>; + }; + + v1_8d: fixed-regulator-v1_8d{ + compatible = "regulator-fixed"; + regulator-name = "V1_8D"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&v1_8dreg>; + }; + + v1_5dreg: fixed-regulator-v1_5dreg{ + compatible = "regulator-fixed"; + regulator-name = "V1_5DREG"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&v24_0d>; + }; + + v1_5d: fixed-regulator-v1_5d{ + compatible = "regulator-fixed"; + regulator-name = "V1_5D"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&v1_5dreg>; + }; + + gpio_keys: gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins_default>; + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + label = "power-button"; + linux,code = <KEY_POWER>; + gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&am43xx_pinmux { + gpio_keys_pins_default: gpio_keys_pins_default { + pinctrl-single,pins = < + 0x1b8 (PIN_INPUT | MUX_MODE7) /* cam0_field.gpio4_2 */ + >; + }; + + i2c0_pins_default: i2c0_pins_default { + pinctrl-single,pins = < + 0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c0_pins_sleep: i2c0_pins_sleep { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x18c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc1_pins_default: pinmux_mmc1_pins_default { + pinctrl-single,pins = < + 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + 0x1f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + 0x1f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + 0x1f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + 0x1fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + mmc1_pins_sleep: pinmux_mmc1_pins_sleep { + pinctrl-single,pins = < + 0x100 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x104 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1f0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1f4 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1f8 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1fc (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x160 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + ecap0_pins_default: backlight_pins_default { + pinctrl-single,pins = < + 0x164 (PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + qspi_pins_default: qspi_pins_default { + pinctrl-single,pins = < + 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */ + 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */ + 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */ + 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */ + 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */ + 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */ + >; + }; + + qspi_pins_sleep: qspi_pins_sleep{ + pinctrl-single,pins = < + 0x7c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x98 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c0_pins_default>; + pinctrl-1 = <&i2c0_pins_sleep>; + clock-frequency = <400000>; + + at24@50 { + compatible = "at24,24c256"; + pagesize = <64>; + reg = <0x50>; + }; + + tps: tps62362@60 { + compatible = "ti,tps62362"; + reg = <0x60>; + regulator-name = "VDD_MPU"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1330000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-high; + ti,vsel1-state-high; + vin-supply = <&v3_3d>; + }; +}; + +&epwmss0 { + status = "okay"; +}; + +&ecap0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ecap0_pins_default>; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio4 { + status = "okay"; +}; + +&gpio5 { + status = "okay"; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_sleep>; + vmmc-supply = <&v3_3d>; + bus-width = <4>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_pins_default>; + pinctrl-1 = <&qspi_pins_sleep>; + + spi-max-frequency = <48000000>; + m25p80@0 { + compatible = "mx66l51235l"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-cpol; + spi-cpha; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + /* + * MTD partition table. The ROM checks the first 512KiB for a + * valid file to boot(XIP). + */ + partition@0 { + label = "QSPI.U_BOOT"; + reg = <0x00000000 0x000080000>; + }; + partition@1 { + label = "QSPI.U_BOOT.backup"; + reg = <0x00080000 0x00080000>; + }; + partition@2 { + label = "QSPI.U-BOOT-SPL_OS"; + reg = <0x00100000 0x00010000>; + }; + partition@3 { + label = "QSPI.U_BOOT_ENV"; + reg = <0x00110000 0x00010000>; + }; + partition@4 { + label = "QSPI.U-BOOT-ENV.backup"; + reg = <0x00120000 0x00010000>; + }; + partition@5 { + label = "QSPI.KERNEL"; + reg = <0x00130000 0x0800000>; + }; + partition@6 { + label = "QSPI.FILESYSTEM"; + reg = <0x00930000 0x36D0000>; + }; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii"; +}; + +&rtc { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; + +&cpu { + cpu0-supply = <&tps>; +}; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 53bbfc90b26a..832d24318f62 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -153,20 +153,26 @@ i2c0_pins: i2c0_pins { pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + 0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; i2c1_pins: i2c1_pins { pinctrl-single,pins = < - 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ - 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ + 0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + 0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < + 0x0f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + 0x0f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + 0x0f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + 0x0fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; @@ -184,35 +190,75 @@ >; }; + vpfe0_pins_default: vpfe0_pins_default { + pinctrl-single,pins = < + 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ + 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/ + 0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_field mode 0*/ + 0x1bc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_wen mode 0*/ + 0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/ + 0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/ + 0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/ + 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/ + 0x20c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/ + 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/ + 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/ + 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/ + 0x21c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/ + 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/ + 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/ + >; + }; + + vpfe0_pins_sleep: vpfe0_pins_sleep { + pinctrl-single,pins = < + 0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + >; + }; + cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */ - 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */ - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */ - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */ + 0x12c (PIN_OUTPUT | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ + 0x114 (PIN_OUTPUT | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x128 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x124 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x120 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */ + 0x11c (PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */ + 0x130 (PIN_INPUT | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ + 0x118 (PIN_INPUT | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x140 (PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + 0x13c (PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + 0x138 (PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */ + 0x134 (PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */ /* Slave 2 */ - 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ - 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ - 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ - 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ - 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ - 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ - 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */ - 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ - 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ - 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ - 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + 0x58 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + 0x40 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + 0x54 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + 0x50 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + 0x4c (PIN_OUTPUT | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + 0x48 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + 0x5c (PIN_INPUT | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + 0x44 (PIN_INPUT | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */ + 0x6c (PIN_INPUT | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + 0x68 (PIN_INPUT | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + 0x64 (PIN_INPUT | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + 0x60 (PIN_INPUT | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ >; }; @@ -251,8 +297,8 @@ davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + 0x148 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT | MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; @@ -266,46 +312,46 @@ dss_pins: dss_pins { pinctrl-single,pins = < - 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */ - 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) - 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */ - 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ - 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0) - 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ - 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ - 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ - 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ - 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ + 0x020 (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */ + 0x024 (PIN_OUTPUT | MUX_MODE1) + 0x028 (PIN_OUTPUT | MUX_MODE1) + 0x02c (PIN_OUTPUT | MUX_MODE1) + 0x030 (PIN_OUTPUT | MUX_MODE1) + 0x034 (PIN_OUTPUT | MUX_MODE1) + 0x038 (PIN_OUTPUT | MUX_MODE1) + 0x03c (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */ + 0x0a0 (PIN_OUTPUT | MUX_MODE0) /* DSS DATA 0 */ + 0x0a4 (PIN_OUTPUT | MUX_MODE0) + 0x0a8 (PIN_OUTPUT | MUX_MODE0) + 0x0ac (PIN_OUTPUT | MUX_MODE0) + 0x0b0 (PIN_OUTPUT | MUX_MODE0) + 0x0b4 (PIN_OUTPUT | MUX_MODE0) + 0x0b8 (PIN_OUTPUT | MUX_MODE0) + 0x0bc (PIN_OUTPUT | MUX_MODE0) + 0x0c0 (PIN_OUTPUT | MUX_MODE0) + 0x0c4 (PIN_OUTPUT | MUX_MODE0) + 0x0c8 (PIN_OUTPUT | MUX_MODE0) + 0x0cc (PIN_OUTPUT | MUX_MODE0) + 0x0d0 (PIN_OUTPUT | MUX_MODE0) + 0x0d4 (PIN_OUTPUT | MUX_MODE0) + 0x0d8 (PIN_OUTPUT | MUX_MODE0) + 0x0dc (PIN_OUTPUT | MUX_MODE0) /* DSS DATA 15 */ + 0x0e0 (PIN_OUTPUT | MUX_MODE0) /* DSS VSYNC */ + 0x0e4 (PIN_OUTPUT | MUX_MODE0) /* DSS HSYNC */ + 0x0e8 (PIN_OUTPUT | MUX_MODE0) /* DSS PCLK */ + 0x0ec (PIN_OUTPUT | MUX_MODE0) /* DSS AC BIAS EN */ >; }; qspi_pins: qspi_pins { pinctrl-single,pins = < - 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */ - 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */ - 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */ - 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */ - 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */ - 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */ + 0x7c (PIN_OUTPUT | MUX_MODE3) /* gpmc_csn0.qspi_csn */ + 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */ + 0x90 (PIN_INPUT | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */ + 0x94 (PIN_INPUT | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */ + 0x98 (PIN_INPUT | MUX_MODE3) /* gpmc_wen.qspi_d2 */ + 0x9c (PIN_INPUT | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */ >; }; @@ -323,6 +369,18 @@ 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */ >; }; + + usb1_pins: usb1_pins { + pinctrl-single,pins = < + 0x2c0 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */ + >; + }; + + usb2_pins: usb2_pins { + pinctrl-single,pins = < + 0x2c4 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */ + >; + }; }; &i2c0 { @@ -386,6 +444,11 @@ regulator-always-on; }; + power-button { + compatible = "ti,tps65218-pwrbutton"; + status = "okay"; + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + }; }; at24@50 { @@ -479,6 +542,8 @@ &usb1 { dr_mode = "peripheral"; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; }; &usb2_phy2 { @@ -488,6 +553,8 @@ &usb2 { dr_mode = "host"; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_pins>; }; &qspi { @@ -610,3 +677,25 @@ &wdt { status = "okay"; }; + +&cpu { + cpu0-supply = <&dcdc2>; +}; + +&vpfe0 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&vpfe0_pins_default>; + pinctrl-1 = <&vpfe0_pins_sleep>; + + /* Camera port */ + port { + vpfe0_ep: endpoint { + /* remote-endpoint = <&sensor>; add once we have it */ + ti,am437x-vpfe-interface = <0>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 662261d6b2ca..257c099c347e 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -243,6 +243,42 @@ 0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7) >; }; + + vpfe1_pins_default: vpfe1_pins_default { + pinctrl-single,pins = < + 0x1cc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0 */ + 0x1d0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0 */ + 0x1d4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0 */ + 0x1d8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0 */ + 0x1dc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0 */ + 0x1e8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0 */ + 0x1ec (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0 */ + 0x1f0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0 */ + 0x1f4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0 */ + 0x1f8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0 */ + 0x1fc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0 */ + 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0 */ + 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0 */ + >; + }; + + vpfe1_pins_sleep: vpfe1_pins_sleep { + pinctrl-single,pins = < + 0x1cc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1d0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1d4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1d8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1dc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1e8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1ec (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1f0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1f4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1f8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1fc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + >; + }; }; matrix_keypad: matrix_keypad@0 { @@ -634,3 +670,20 @@ }; }; }; + +&vpfe1 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&vpfe1_pins_default>; + pinctrl-1 = <&vpfe1_pins_sleep>; + + port { + vpfe1_ep: endpoint { + /* remote-endpoint = <&sensor>; add once we have it */ + ti,am437x-vpfe-interface = <0>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index c7dc9dab93a4..cfb49686ab6a 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -107,7 +107,7 @@ ehrpwm0_tbclk: ehrpwm0_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <0>; reg = <0x0664>; }; @@ -115,7 +115,7 @@ ehrpwm1_tbclk: ehrpwm1_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <1>; reg = <0x0664>; }; @@ -123,7 +123,7 @@ ehrpwm2_tbclk: ehrpwm2_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <2>; reg = <0x0664>; }; @@ -131,7 +131,7 @@ ehrpwm3_tbclk: ehrpwm3_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <4>; reg = <0x0664>; }; @@ -139,7 +139,7 @@ ehrpwm4_tbclk: ehrpwm4_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <5>; reg = <0x0664>; }; @@ -147,7 +147,7 @@ ehrpwm5_tbclk: ehrpwm5_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <6>; reg = <0x0664>; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 49edbda68cd5..6463f9ef2b54 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -80,6 +80,28 @@ default-state = "off"; }; }; + + gpio_fan: gpio_fan { + /* Based on 5v 500mA AFB02505HHB */ + compatible = "gpio-fan"; + gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0>, + <13000 1>; + }; + + extcon_usb1: extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&extcon_usb1_pins>; + }; + + extcon_usb2: extcon_usb2 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&extcon_usb2_pins>; + }; }; &dra7_pmx_core { @@ -140,6 +162,86 @@ >; }; + cpsw_pins_default: cpsw_pins_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */ + 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */ + 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */ + 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */ + 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */ + 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */ + 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */ + 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */ + 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */ + 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */ + 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */ + 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */ + + /* Slave 2 */ + 0x198 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */ + 0x19c (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */ + 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */ + 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */ + 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */ + 0x1ac (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */ + 0x1b0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */ + 0x1b4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */ + 0x1b8 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */ + 0x1bc (PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */ + 0x1c0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */ + 0x1c4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */ + >; + + }; + + cpsw_pins_sleep: cpsw_pins_sleep { + pinctrl-single,pins = < + /* Slave 1 */ + 0x250 (PIN_INPUT | MUX_MODE15) + 0x254 (PIN_INPUT | MUX_MODE15) + 0x258 (PIN_INPUT | MUX_MODE15) + 0x25c (PIN_INPUT | MUX_MODE15) + 0x260 (PIN_INPUT | MUX_MODE15) + 0x264 (PIN_INPUT | MUX_MODE15) + 0x268 (PIN_INPUT | MUX_MODE15) + 0x26c (PIN_INPUT | MUX_MODE15) + 0x270 (PIN_INPUT | MUX_MODE15) + 0x274 (PIN_INPUT | MUX_MODE15) + 0x278 (PIN_INPUT | MUX_MODE15) + 0x27c (PIN_INPUT | MUX_MODE15) + + /* Slave 2 */ + 0x198 (PIN_INPUT | MUX_MODE15) + 0x19c (PIN_INPUT | MUX_MODE15) + 0x1a0 (PIN_INPUT | MUX_MODE15) + 0x1a4 (PIN_INPUT | MUX_MODE15) + 0x1a8 (PIN_INPUT | MUX_MODE15) + 0x1ac (PIN_INPUT | MUX_MODE15) + 0x1b0 (PIN_INPUT | MUX_MODE15) + 0x1b4 (PIN_INPUT | MUX_MODE15) + 0x1b8 (PIN_INPUT | MUX_MODE15) + 0x1bc (PIN_INPUT | MUX_MODE15) + 0x1c0 (PIN_INPUT | MUX_MODE15) + 0x1c4 (PIN_INPUT | MUX_MODE15) + >; + }; + + davinci_mdio_pins_default: davinci_mdio_pins_default { + pinctrl-single,pins = < + /* MDIO */ + 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */ + 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */ + >; + }; + + davinci_mdio_pins_sleep: davinci_mdio_pins_sleep { + pinctrl-single,pins = < + 0x23c (PIN_INPUT | MUX_MODE15) + 0x240 (PIN_INPUT | MUX_MODE15) + >; + }; + tps659038_pins_default: tps659038_pins_default { pinctrl-single,pins = < 0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */ @@ -164,6 +266,17 @@ >; }; + extcon_usb1_pins: extcon_usb1_pins { + pinctrl-single,pins = < + 0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */ + >; + }; + + extcon_usb2_pins: extcon_usb2_pins { + pinctrl-single,pins = < + 0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */ + >; + }; }; &i2c1 { @@ -314,6 +427,12 @@ wakeup-source; ti,palmas-long-press-seconds = <12>; }; + + tps659038_gpio: tps659038_gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; }; tmp102: tmp102@48 { @@ -365,6 +484,32 @@ pinctrl-0 = <&uart3_pins_default>; }; +&mac { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_pins_default>; + pinctrl-1 = <&cpsw_pins_sleep>; + dual_emac; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <2>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <2>; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_pins_default>; + pinctrl-1 = <&davinci_mdio_pins_sleep>; +}; + &mmc1 { status = "okay"; @@ -403,3 +548,7 @@ pinctrl-names = "default"; pinctrl-0 = <&usb1_pins>; }; + +&usb2 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 70b1943a86b1..e993c46bd472 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -8,9 +8,43 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index e1b0eb6b091f..b10ceb488efe 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -3,9 +3,43 @@ * * Gregory CLEMENT <gregory.clement@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 4e24932c6e30..3f8cc3845a5e 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -3,10 +3,43 @@ * * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -87,6 +120,7 @@ isl12057: isl12057@68 { compatible = "isil,isl12057"; reg = <0x68>; + isil,irq2-can-wakeup-machine; }; g762: g762@3e { diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index 30586e47986a..99eb8a014ac6 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -3,10 +3,43 @@ * * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -93,6 +126,7 @@ isl12057: isl12057@68 { compatible = "isil,isl12057"; reg = <0x68>; + isil,irq2-can-wakeup-machine; }; g762: g762@3e { diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 394308951ed9..6ae36a38beb2 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -6,9 +6,43 @@ * * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Note: this Device Tree assumes that the bootloader has remapped the * internal registers to 0xf1000000 (instead of the default diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index 70fecde76ccb..59f74e66963f 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -3,10 +3,43 @@ * * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Note: this Device Tree assumes that the bootloader has remapped the * internal registers to 0xf1000000 (instead of the old 0xd0000000). diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 1af428602748..8a322ad57e5f 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -8,9 +8,43 @@ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Ben Dooks <ben.dooks@codethink.co.uk> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * This file contains the definitions that are common to the Armada * 370 and Armada XP SoC. diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index fdb3c12a6139..27397f151def 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -7,9 +7,43 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Contains definitions specific to the Armada 370 SoC that are not * common to all Armada SoCs. diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 929ae00b4063..0440891425c0 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -7,9 +7,43 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 50096d3427eb..ba3c57e0af72 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -6,9 +6,43 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" @@ -63,7 +97,7 @@ }; soc { - compatible = "marvell,armada375-mbus", "marvell,armada370-mbus", "simple-bus"; + compatible = "marvell,armada375-mbus", "simple-bus"; #address-cells = <2>; #size-cells = <1>; controller = <&mbusc>; diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index 4173a8ab34e7..5102d19cc8f4 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -7,9 +7,43 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-38x.dtsi" @@ -32,9 +66,8 @@ soc { internal-regs { - pinctrl { + pinctrl@18000 { compatible = "marvell,mv88f6810-pinctrl"; - reg = <0x18000 0x20>; }; }; diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts new file mode 100644 index 000000000000..57b9119fb3e0 --- /dev/null +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -0,0 +1,178 @@ +/* + * Device Tree file for Marvell Armada 385 Access Point Development board + * (DB-88F6820-AP) + * + * Copyright (C) 2014 Marvell + * + * Nadav Haklai <nadavh@marvell.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-385.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Marvell Armada 385 Access Point Development Board"; + compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart1; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + + internal-regs { + spi1: spi@10680 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p128"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <54000000>; + }; + }; + + i2c0: i2c@11000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + /* + * This bus is wired to two EEPROM + * sockets, one of which holding the + * board ID used by the bootloader. + * Erasing this EEPROM's content will + * brick the board. + * Use this bus with caution. + */ + }; + + mdio@72004 { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + + phy1: ethernet-phy@4 { + reg = <4>; + }; + + phy2: ethernet-phy@6 { + reg = <6>; + }; + }; + + /* UART0 is exposed through the JP8 connector */ + uart0: serial@12000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; + }; + + /* + * UART1 is exposed through a FTDI chip + * wired to the mini-USB connector + */ + uart1: serial@12100 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; + }; + + ethernet@30000 { + status = "okay"; + phy = <&phy2>; + phy-mode = "sgmii"; + }; + + ethernet@34000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "sgmii"; + }; + + ethernet@70000 { + pinctrl-names = "default"; + + /* + * The Reference Clock 0 is used to + * provide a clock to the PHY + */ + pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>; + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + }; + + pcie-controller { + status = "okay"; + + /* + * The three PCIe units are accessible through + * standard mini-PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + + pcie@3,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-385-rd.dts b/arch/arm/boot/dts/armada-385-rd.dts deleted file mode 100644 index aaca2861dc87..000000000000 --- a/arch/arm/boot/dts/armada-385-rd.dts +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Device Tree file for Marvell Armada 385 Reference Design board - * (RD-88F6820-AP) - * - * Copyright (C) 2014 Marvell - * - * Gregory CLEMENT <gregory.clement@free-electrons.com> - * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -/dts-v1/; -#include "armada-385.dtsi" - -/ { - model = "Marvell Armada 385 Reference Design"; - compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380"; - - chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; /* 256 MB */ - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; - - internal-regs { - spi@10600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p128"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - }; - }; - - i2c@11000 { - status = "okay"; - clock-frequency = <100000>; - }; - - serial@12000 { - status = "okay"; - }; - - ethernet@30000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - - ethernet@70000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; - - - mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - - usb3@f0000 { - status = "okay"; - }; - }; - - pcie-controller { - status = "okay"; - /* - * One PCIe units is accessible through - * standard PCIe slot on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index 6283d7912f71..8e67d2c083dd 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -7,9 +7,43 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-38x.dtsi" @@ -37,9 +71,8 @@ soc { internal-regs { - pinctrl { + pinctrl@18000 { compatible = "marvell,mv88f6820-pinctrl"; - reg = <0x18000 0x20>; }; }; diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-388-db.dts index 2aaa9d2ac284..16512efcd32c 100644 --- a/arch/arm/boot/dts/armada-385-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -1,22 +1,57 @@ /* - * Device Tree file for Marvell Armada 385 evaluation board + * Device Tree file for Marvell Armada 388 evaluation board * (DB-88F6820) * * Copyright (C) 2014 Marvell * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -#include "armada-385.dtsi" +#include "armada-388.dtsi" / { model = "Marvell Armada 385 Development Board"; - compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada380"; + compatible = "marvell,a385-db", "marvell,armada388", + "marvell,armada385", "marvell,armada380"; chosen { bootargs = "console=ttyS0,115200 earlyprintk"; @@ -74,7 +109,7 @@ phy-mode = "rgmii-id"; }; - mdio { + mdio@72004 { phy0: ethernet-phy@0 { reg = <0>; }; diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts new file mode 100644 index 000000000000..590b383db323 --- /dev/null +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -0,0 +1,414 @@ +/* + * Device Tree file for Marvell Armada 385 development board + * (RD-88F6820-GP) + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-388.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Marvell Armada 385 GP"; + compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2 GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + + internal-regs { + spi@10600 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p128"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + m25p,fast-read; + }; + }; + + i2c@11000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + clock-frequency = <100000>; + /* + * The EEPROM located at adresse 54 is needed + * for the boot - DO NOT ERASE IT - + */ + + expander0: pca9555@20 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + pinctrl-0 = <&pca0_pins>; + interrupt-parent = <&gpio0>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x20>; + }; + + expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + interrupt-parent = <&gpio0>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x21>; + }; + + }; + + serial@12000 { + /* + * Exported on the micro USB connector CON16 + * through an FTDI + */ + + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; + }; + + /* GE1 CON15 */ + ethernet@30000 { + pinctrl-names = "default"; + pinctrl-0 = <&ge1_rgmii_pins>; + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + /* CON4 */ + usb@50000 { + vcc-supply = <®_usb2_0_vbus>; + status = "okay"; + }; + + /* GE0 CON1 */ + ethernet@70000 { + pinctrl-names = "default"; + /* + * The Reference Clock 0 is used to provide a + * clock to the PHY + */ + pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>; + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + + mdio@72004 { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + + phy1: ethernet-phy@0 { + reg = <0>; + }; + }; + + sata@a8000 { + pinctrl-names = "default"; + pinctrl-0 = <&sata0_pins>, <&sata1_pins>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + target-supply = <®_5v_sata0>; + }; + + sata1: sata-port@1 { + reg = <1>; + target-supply = <®_5v_sata1>; + }; + }; + + sata@e0000 { + pinctrl-names = "default"; + pinctrl-0 = <&sata2_pins>, <&sata3_pins>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + sata2: sata-port@0 { + reg = <0>; + target-supply = <®_5v_sata2>; + }; + + sata3: sata-port@1 { + reg = <1>; + target-supply = <®_5v_sata3>; + }; + }; + + sdhci@d8000 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhci_pins>; + cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>; + no-1-8-v; + wp-inverted; + bus-width = <8>; + status = "okay"; + }; + + /* CON5 */ + usb3@f0000 { + vcc-supply = <®_usb2_1_vbus>; + status = "okay"; + }; + + /* CON7 */ + usb3@f8000 { + vcc-supply = <®_usb3_vbus>; + status = "okay"; + }; + }; + + pcie-controller { + status = "okay"; + /* + * One PCIe units is accessible through + * standard PCIe slot on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* + * The two other PCIe units are accessible + * through mini PCIe slot on the board. + */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + pcie@3,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + }; + + gpio-fan { + compatible = "gpio-fan"; + gpios = <&expander1 3 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = < 0 0 + 3000 1>; + }; + }; + + reg_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&expander1 15 GPIO_ACTIVE_HIGH>; + }; + + reg_usb2_0_vbus: v5-vbus0 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-vbus0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&expander1 14 GPIO_ACTIVE_HIGH>; + }; + + reg_usb2_1_vbus: v5-vbus1 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-vbus1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&expander0 4 GPIO_ACTIVE_HIGH>; + }; + + reg_usb2_1_vbus: v5-vbus1 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-vbus1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&expander0 4 GPIO_ACTIVE_HIGH>; + }; + + reg_sata0: pwr-sata0 { + compatible = "regulator-fixed"; + regulator-name = "pwr_en_sata0"; + enable-active-high; + regulator-always-on; + + }; + + reg_5v_sata0: v5-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_sata0>; + }; + + reg_12v_sata0: v12-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + vin-supply = <®_sata0>; + }; + + reg_sata1: pwr-sata1 { + regulator-name = "pwr_en_sata1"; + compatible = "regulator-fixed"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + regulator-always-on; + gpio = <&expander0 3 GPIO_ACTIVE_HIGH>; + }; + + reg_5v_sata1: v5-sata1 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_sata1>; + }; + + reg_12v_sata1: v12-sata1 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata1"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + vin-supply = <®_sata1>; + }; + + reg_sata2: pwr-sata2 { + compatible = "regulator-fixed"; + regulator-name = "pwr_en_sata2"; + enable-active-high; + regulator-always-on; + gpio = <&expander0 11 GPIO_ACTIVE_HIGH>; + }; + + reg_5v_sata2: v5-sata2 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_sata2>; + }; + + reg_12v_sata2: v12-sata2 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata2"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + vin-supply = <®_sata2>; + }; + + reg_sata3: pwr-sata3 { + compatible = "regulator-fixed"; + regulator-name = "pwr_en_sata3"; + enable-active-high; + regulator-always-on; + gpio = <&expander0 12 GPIO_ACTIVE_HIGH>; + }; + + reg_5v_sata3: v5-sata3 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata3"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_sata3>; + }; + + reg_12v_sata3: v12-sata3 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata3"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + vin-supply = <®_sata3>; + }; +}; + +&pinctrl { + pca0_pins: pca0_pins { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts new file mode 100644 index 000000000000..d99baac72081 --- /dev/null +++ b/arch/arm/boot/dts/armada-388-rd.dts @@ -0,0 +1,132 @@ +/* + * Device Tree file for Marvell Armada 388 Reference Design board + * (RD-88F6820-AP) + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-388.dtsi" + +/ { + model = "Marvell Armada 385 Reference Design"; + compatible = "marvell,a385-rd", "marvell,armada388", + "marvell,armada385","marvell,armada380"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; /* 256 MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + + internal-regs { + spi@10600 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p128"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; + }; + + i2c@11000 { + status = "okay"; + clock-frequency = <100000>; + }; + + serial@12000 { + status = "okay"; + }; + + ethernet@30000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + ethernet@70000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + + mdio@72004 { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + usb3@f0000 { + status = "okay"; + }; + }; + + pcie-controller { + status = "okay"; + /* + * One PCIe units is accessible through + * standard PCIe slot on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-388.dtsi b/arch/arm/boot/dts/armada-388.dtsi new file mode 100644 index 000000000000..564fa5937e25 --- /dev/null +++ b/arch/arm/boot/dts/armada-388.dtsi @@ -0,0 +1,70 @@ +/* + * Device Tree Include file for Marvell Armada 388 SoC. + * + * Copyright (C) 2015 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * + * The main difference with the Armada 385 is that the 388 can handle two more + * SATA ports. So we can reuse the dtsi of the Armada 385, override the pinctrl + * property and the name of the SoC, and add the second SATA host which control + * the 2 other ports. + */ + +#include "armada-385.dtsi" + +/ { + model = "Marvell Armada 388 family SoC"; + compatible = "marvell,armada388", "marvell,armada385", + "marvell,armada380"; + + soc { + internal-regs { + pinctrl@18000 { + compatible = "marvell,mv88f6828-pinctrl"; + }; + + sata@e0000 { + compatible = "marvell,armada-380-ahci"; + reg = <0xe0000 0x2000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 30>; + status = "disabled"; + }; + + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 74391dace9e7..1dff30a81e24 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -7,9 +7,43 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" @@ -31,8 +65,7 @@ }; soc { - compatible = "marvell,armada380-mbus", "marvell,armada370-mbus", - "simple-bus"; + compatible = "marvell,armada380-mbus", "simple-bus"; #address-cells = <2>; #size-cells = <1>; controller = <&mbusc>; @@ -173,7 +206,7 @@ status = "disabled"; }; - serial@12000 { + uart0: serial@12000 { compatible = "snps,dw-apb-uart"; reg = <0x12000 0x100>; reg-shift = <2>; @@ -193,9 +226,94 @@ status = "disabled"; }; - pinctrl { - compatible = "marvell,mv88f6820-pinctrl"; + pinctrl: pinctrl@18000 { reg = <0x18000 0x20>; + + ge0_rgmii_pins: ge-rgmii-pins-0 { + marvell,pins = "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11", + "mpp12", "mpp13", "mpp14", + "mpp15", "mpp16", "mpp17"; + marvell,function = "ge0"; + }; + + ge1_rgmii_pins: ge-rgmii-pins-1 { + marvell,pins = "mpp21", "mpp27", "mpp28", + "mpp29", "mpp30", "mpp31", + "mpp32", "mpp37", "mpp38", + "mpp39", "mpp40", "mpp41"; + marvell,function = "ge1"; + }; + + i2c0_pins: i2c-pins-0 { + marvell,pins = "mpp2", "mpp3"; + marvell,function = "i2c0"; + }; + + mdio_pins: mdio-pins { + marvell,pins = "mpp4", "mpp5"; + marvell,function = "ge"; + }; + + ref_clk0_pins: ref-clk-pins-0 { + marvell,pins = "mpp45"; + marvell,function = "ref"; + }; + + ref_clk1_pins: ref-clk-pins-1 { + marvell,pins = "mpp46"; + marvell,function = "ref"; + }; + + spi0_pins: spi-pins-0 { + marvell,pins = "mpp22", "mpp23", "mpp24", + "mpp25"; + marvell,function = "spi0"; + }; + + spi1_pins: spi-pins-1 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59"; + marvell,function = "spi1"; + }; + + uart0_pins: uart-pins-0 { + marvell,pins = "mpp0", "mpp1"; + marvell,function = "ua0"; + }; + + uart1_pins: uart-pins-1 { + marvell,pins = "mpp19", "mpp20"; + marvell,function = "ua1"; + }; + + sdhci_pins: sdhci-pins { + marvell,pins = "mpp48", "mpp49", "mpp50", + "mpp52", "mpp53", "mpp54", + "mpp55", "mpp57", "mpp58", + "mpp59"; + marvell,function = "sd0"; + }; + + sata0_pins: sata-pins-0 { + marvell,pins = "mpp20"; + marvell,function = "sata0"; + }; + + sata1_pins: sata-pins-1 { + marvell,pins = "mpp19"; + marvell,function = "sata1"; + }; + + sata2_pins: sata-pins-2 { + marvell,pins = "mpp47"; + marvell,function = "sata2"; + }; + + sata3_pins: sata-pins-3 { + marvell,pins = "mpp44"; + marvell,function = "sata3"; + }; }; gpio0: gpio@18100 { @@ -373,7 +491,7 @@ status = "disabled"; }; - mdio { + mdio@72004 { #address-cells = <1>; #size-cells = <0>; compatible = "marvell,orion-mdio"; @@ -381,6 +499,13 @@ clocks = <&gateclk 4>; }; + rtc@a3800 { + compatible = "marvell,armada-380-rtc"; + reg = <0xa3800 0x20>, <0x184a0 0x0c>; + reg-names = "rtc", "rtc-soc"; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + }; + sata@a8000 { compatible = "marvell,armada-380-ahci"; reg = <0xa8000 0x2000>; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index ca0200e20751..c1fbab243609 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -3,16 +3,50 @@ * * Note: this board is shipped with a new generation boot loader that * remaps internal registers at 0xf1000000. Therefore, if earlyprintk - * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be - * used. + * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option or the + * CONFIG_DEBUG_MVEBU_UART1_ALTERNATE option should be used. * * Copyright (C) 2013 Marvell * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -60,10 +94,12 @@ }; internal-regs { + /* UART0 */ serial@12000 { status = "okay"; }; + /* UART1 */ serial@12100 { status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 42ddb2864365..48bdafe17526 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -8,9 +8,43 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Note: this Device Tree assumes that the bootloader has remapped the * internal registers to 0xf1000000 (instead of the default diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index ea8673647494..206aebba01be 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -8,9 +8,43 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Note: this Device Tree assumes that the bootloader has remapped the * internal registers to 0xf1000000 (instead of the default diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index a2ef93c1eb10..5fb3c8b687cf 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -3,10 +3,43 @@ * * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts index 7e291e2ef4b3..56f958eb1ede 100644 --- a/arch/arm/boot/dts/armada-xp-matrix.dts +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -5,9 +5,43 @@ * * Lior Amsalem <alior@marvell.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 281ccd24295c..6e6d0f04bf2b 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -5,9 +5,43 @@ * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Contains definitions specific to the Armada XP MV78230 SoC that are not * common to all Armada XP SoCs. diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index d7a8d0b0f385..4a7cbed79b07 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -5,9 +5,43 @@ * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Contains definitions specific to the Armada XP MV78260 SoC that are not * common to all Armada XP SoCs. diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 9c40c130d11a..36ce63a96cc9 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -5,9 +5,43 @@ * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Contains definitions specific to the Armada XP MV78460 SoC that are not * common to all Armada XP SoCs. diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index d81430aa4ab3..99cb9a8401b4 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -3,10 +3,43 @@ * * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -100,6 +133,7 @@ isl12057: isl12057@68 { compatible = "isil,isl12057"; reg = <0x68>; + isil,irq2-can-wakeup-machine; }; /* Controller for rear fan #1 of 3 (Protechnic diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 6f6b0916df48..0c76d9f05fd0 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -5,9 +5,43 @@ * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index 749fdba5a642..e9fb225169aa 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -3,10 +3,43 @@ * * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Note: this Device Tree assumes that the bootloader has remapped the * internal registers to 0xf1000000 (instead of the old 0xd0000000). diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 62c3ba958b39..82917236a2fb 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -8,9 +8,43 @@ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Ben Dooks <ben.dooks@codethink.co.uk> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Contains definitions specific to the Armada XP SoC that are not * common to all Armada SoCs. diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 6c97d4af61ee..21c2b504f977 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -66,6 +66,11 @@ }; }; + sram: sram@00200000 { + compatible = "mmio-sram"; + reg = <0x00200000 0x4000>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -356,6 +361,13 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; + rtc: rtc@fffffe00 { + compatible = "atmel,at91rm9200-rtc"; + reg = <0xfffffe00 0x40>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + status = "disabled"; + }; + tcb0: timer@fffa0000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa0000 0x100>; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index 43eb779dd6f6..2a5d21247d7e 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -77,6 +77,10 @@ dbgu: serial@fffff200 { status = "okay"; }; + + rtc: rtc@fffffe00 { + status = "okay"; + }; }; usb0: ohci@00300000 { diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index dd1313cbc314..e7f0a4ae271c 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -69,6 +69,11 @@ }; }; + sram0: sram@002ff000 { + compatible = "mmio-sram"; + reg = <0x002ff000 0x2000>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -489,12 +494,12 @@ pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC8 periph B */ + <AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC10 periph B */ + <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; }; @@ -848,7 +853,7 @@ }; usb1: gadget@fffa4000 { - compatible = "atmel,at91rm9200-udc"; + compatible = "atmel,at91sam9260-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&udc_clk>, <&udpck>; @@ -971,7 +976,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index cdb9ed612109..d55fdf2487ef 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -60,6 +60,11 @@ }; }; + sram: sram@00300000 { + compatible = "mmio-sram"; + reg = <0x00300000 0x28000>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -119,11 +124,12 @@ }; usb1: gadget@fffa4000 { - compatible = "atmel,at91rm9200-udc"; + compatible = "atmel,at91sam9261-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&udc_clk>, <&udpck>; - clock-names = "usb_clk", "udc_clk", "udpck"; + clocks = <&udc_clk>, <&udpck>; + clock-names = "pclk", "hclk"; + atmel,matrix = <&matrix>; status = "disabled"; }; @@ -257,7 +263,7 @@ }; matrix: matrix@ffffee00 { - compatible = "atmel,at91sam9260-bus-matrix"; + compatible = "atmel,at91sam9260-bus-matrix", "syscon"; reg = <0xffffee00 0x200>; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index e8c6c600a5b6..fce301c4e9d6 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -62,6 +62,16 @@ }; }; + sram0: sram@00300000 { + compatible = "mmio-sram"; + reg = <0x00300000 0x14000>; + }; + + sram1: sram@00500000 { + compatible = "mmio-sram"; + reg = <0x00500000 0x4000>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -294,7 +304,7 @@ reg = <17>; }; - ac91_clk: ac97_clk { + ac97_clk: ac97_clk { #clock-cells = <0>; reg = <18>; }; @@ -685,6 +695,16 @@ }; }; + ac97 { + pinctrl_ac97: ac97-0 { + atmel,pins = + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A AC97FS pin */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A AC97CK pin */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A AC97TX pin */ + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A AC97RX pin */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -813,6 +833,17 @@ status = "disabled"; }; + ac97: sound@fffa0000 { + compatible = "atmel,at91sam9263-ac97c"; + reg = <0xfffa0000 0x4000>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ac97>; + clocks = <&ac97_clk>; + clock-names = "ac97_clk"; + status = "disabled"; + }; + macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; @@ -825,7 +856,7 @@ }; usb1: gadget@fff78000 { - compatible = "atmel,at91rm9200-udc"; + compatible = "atmel,at91sam9263-udc"; reg = <0xfff78000 0x4000>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&udc_clk>, <&udpck>; @@ -874,7 +905,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index a50ee587a7af..f59301618163 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -16,6 +16,15 @@ reg = <0x20000000 0x08000000>; }; + sram0: sram@002ff000 { + status = "disabled"; + }; + + sram1: sram@002fc000 { + compatible = "mmio-sram"; + reg = <0x002fc000 0x8000>; + }; + ahb { apb { i2c0: i2c@fffac000 { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 2a8da8a884b4..488af63d5174 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -74,6 +74,11 @@ }; }; + sram: sram@00300000 { + compatible = "mmio-sram"; + reg = <0x00300000 0x10000>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -1111,7 +1116,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; @@ -1287,7 +1291,6 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - //TODO clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; @@ -1297,8 +1300,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - //TODO - clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 68eb9aded164..0c53a375ba99 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -64,6 +64,11 @@ }; }; + sram: sram@00300000 { + compatible = "mmio-sram"; + reg = <0x00300000 0x8000>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -889,7 +894,13 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; + status = "disabled"; + }; + + rtc@fffffeb0 { + compatible = "atmel,at91rm9200-rtc"; + reg = <0xfffffeb0 0x40>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 13bb24ea971a..9575c0d895c9 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -54,7 +54,7 @@ status = "okay"; wm8904: codec@1a { - compatible = "wm8904"; + compatible = "wlf,wm8904"; reg = <0x1a>; clocks = <&pck0>; clock-names = "mclk"; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 72424371413e..40f645b8fe25 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -70,6 +70,11 @@ }; }; + sram: sram@00300000 { + compatible = "mmio-sram"; + reg = <0x00300000 0x10000>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index bbb3ba65165f..d221179d0f1a 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -72,6 +72,11 @@ }; }; + sram: sram@00300000 { + compatible = "mmio-sram"; + reg = <0x00300000 0x8000>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -1061,7 +1066,7 @@ reg = <0x00500000 0x80000 0xf803c000 0x400>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&usb>, <&udphs_clk>; + clocks = <&utmi>, <&udphs_clk>; clock-names = "hclk", "pclk"; status = "disabled"; @@ -1125,7 +1130,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; @@ -1181,7 +1185,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ehci_clk", "uhpck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 3a9f6fa4a36a..bd16bd360272 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -53,6 +53,8 @@ }; usb2: gadget@f803c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_board_usb2>; atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -80,6 +82,13 @@ <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */ }; }; + + usb2 { + pinctrl_board_usb2: usb2-board { + atmel,pins = + <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB16 gpio vbus sense, deglitch */ + }; + }; }; spi0: spi@f0000000 { diff --git a/arch/arm/boot/dts/at91sam9xe.dtsi b/arch/arm/boot/dts/at91sam9xe.dtsi new file mode 100644 index 000000000000..0278f63b2daf --- /dev/null +++ b/arch/arm/boot/dts/at91sam9xe.dtsi @@ -0,0 +1,60 @@ +/* + * at91sam9xe.dtsi - Device Tree Include file for AT91SAM9XE family SoC + * + * Copyright (C) 2015 Atmel, + * 2015 Alexandre Belloni <alexandre.Belloni@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "at91sam9260.dtsi" + +/ { + model = "Atmel AT91SAM9XE family SoC"; + compatible = "atmel,at91sam9xe", "atmel,at91sam9260"; + + sram0: sram@002ff000 { + status = "disabled"; + }; + + sram1: sram@00300000 { + compatible = "mmio-sram"; + reg = <0x00300000 0x4000>; + }; +}; diff --git a/arch/arm/boot/dts/atlas7-evb.dts b/arch/arm/boot/dts/atlas7-evb.dts new file mode 100644 index 000000000000..49cf59a95572 --- /dev/null +++ b/arch/arm/boot/dts/atlas7-evb.dts @@ -0,0 +1,110 @@ +/* + * DTS file for CSR SiRFatlas7 Evaluation Board + * + * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; + +/include/ "atlas7.dtsi" + +/ { + model = "CSR SiRFatlas7 Evaluation Board"; + compatible = "sirf,atlas7-cb", "sirf,atlas7"; + + chosen { + bootargs = "console=ttySiRF1,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x40000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vpp_reserved: vpp_mem@5e800000 { + compatible = "sirf,reserved-memory"; + reg = <0x5e800000 0x800000>; + }; + + nanddisk_reserved: nanddisk@46000000 { + reg = <0x46000000 0x200000>; + no-map; + }; + }; + + + noc { + mediam { + nand@17050000 { + memory-region = <&nanddisk_reserved>; + }; + }; + + gnssm { + spi1: spi@18200000 { + status = "okay"; + spiflash: macronix@0{ + status = "okay"; + compatible = "macronix,mx25l6405d"; + reg = <0>; + spi-max-frequency = <37500000>; + spi-cpha; + spi-cpol; + #address-cells = <1>; + #size-cells = <1>; + partitions@0 { + label = "myspiboot"; + reg = <0x0 0x800000>; + }; + }; + }; + }; + + btm { + uart6: uart@11000000 { + status = "okay"; + sirf,uart-has-rtscts; + }; + }; + + disp-iobg { + vpp@13110000 { + memory-region = <&vpp_reserved>; + }; + }; + + display0: display@0 { + compatible = "lvds-panel"; + source = "lvds.0"; + + bl-gpios = <&gpio_1 63 0>; + data-lines = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <60000000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <220>; + hback-porch = <100>; + hsync-len = <1>; + vback-porch = <10>; + vfront-porch = <25>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/atlas7.dtsi b/arch/arm/boot/dts/atlas7.dtsi new file mode 100644 index 000000000000..a753178abc85 --- /dev/null +++ b/arch/arm/boot/dts/atlas7.dtsi @@ -0,0 +1,813 @@ +/* + * DTS file for CSR SiRFatlas7 SoC + * + * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" +/ { + compatible = "sirf,atlas7"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &uart6; + serial9 = &usp2; + }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <1>; + }; + }; + + noc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x10000000 0x10000000 0xc0000000>; + + gic: interrupt-controller@10301000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x10301000 0x1000>, + <0x10302000 0x0100>; + }; + + pmu_regulator: pmu_regulator@10E30020 { + compatible = "sirf,atlas7-pmu-ldo"; + reg = <0x10E30020 0x4>; + ldo: ldo { + regulator-name = "ldo"; + }; + }; + + atlas7_codec: atlas7_codec@10E30000 { + #sound-dai-cells = <0>; + compatible = "sirf,atlas7-codec"; + reg = <0x10E30000 0x400>; + clocks = <&car 62>; + ldo-supply = <&ldo>; + }; + + atlas7_iacc: atlas7_iacc@10D01000 { + #sound-dai-cells = <0>; + compatible = "sirf,atlas7-iacc"; + reg = <0x10D01000 0x100>; + dmas = <&dmac3 0>, <&dmac3 7>, <&dmac3 8>, + <&dmac3 3>, <&dmac3 9>; + dma-names = "rx", "tx0", "tx1", "tx2", "tx3"; + clocks = <&car 62>; + }; + + ipc@13240000 { + compatible = "sirf,atlas7-ipc"; + ranges = <0x13240000 0x13240000 0x00010000>; + #address-cells = <1>; + #size-cells = <1>; + + hwspinlock { + compatible = "sirf,hwspinlock"; + reg = <0x13240000 0x00010000>; + + num-spinlocks = <30>; + }; + + ns_m3_rproc@0 { + compatible = "sirf,ns2m30-rproc"; + reg = <0x13240000 0x00010000>; + interrupts = <0 123 0>; + }; + + ns_m3_rproc@1 { + compatible = "sirf,ns2m31-rproc"; + reg = <0x13240000 0x00010000>; + interrupts = <0 126 0>; + }; + + ns_kal_rproc@0 { + compatible = "sirf,ns2kal0-rproc"; + reg = <0x13240000 0x00010000>; + interrupts = <0 124 0>; + }; + + ns_kal_rproc@1 { + compatible = "sirf,ns2kal1-rproc"; + reg = <0x13240000 0x00010000>; + interrupts = <0 127 0>; + }; + }; + + pinctrl: ioc@18880000 { + compatible = "sirf,atlas7-ioc"; + reg = <0x18880000 0x1000>, + <0x10E40000 0x1000>; + }; + + pmipc { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x13240000 0x13240000 0x00010000>; + pmipc@0x13240000 { + compatible = "sirf,atlas7-pmipc"; + reg = <0x13240000 0x00010000>; + }; + }; + + dramfw { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x10830000 0x10830000 0x18000>; + dramfw@10820000 { + compatible = "sirf,nocfw-dramfw"; + reg = <0x10830000 0x18000>; + }; + }; + + spramfw { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x10250000 0x10250000 0x3000>; + spramfw@10820000 { + compatible = "sirf,nocfw-spramfw"; + reg = <0x10250000 0x3000>; + }; + }; + + cpum { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x10200000 0x10200000 0x3000>; + cpum@10200000 { + compatible = "sirf,nocfw-cpum"; + reg = <0x10200000 0x3000>; + }; + }; + + cgum { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x18641000 0x18641000 0x3000>, + <0x18620000 0x18620000 0x1000>; + + cgum@18641000 { + compatible = "sirf,nocfw-cgum"; + reg = <0x18641000 0x3000>; + }; + + car: clock-controller@18620000 { + compatible = "sirf,atlas7-car"; + reg = <0x18620000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; + + gnssm { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x18000000 0x18000000 0x0000ffff>, + <0x18010000 0x18010000 0x1000>, + <0x18020000 0x18020000 0x1000>, + <0x18030000 0x18030000 0x1000>, + <0x18040000 0x18040000 0x1000>, + <0x18050000 0x18050000 0x1000>, + <0x18060000 0x18060000 0x1000>, + <0x18100000 0x18100000 0x3000>, + <0x18250000 0x18250000 0x10000>, + <0x18200000 0x18200000 0x1000>; + + dmac0: dma-controller@18000000 { + cell-index = <0>; + compatible = "sirf,atlas7-dmac"; + reg = <0x18000000 0x1000>; + interrupts = <0 12 0>; + clocks = <&car 89>; + dma-channels = <16>; + #dma-cells = <1>; + }; + + gnssmfw@0x18100000 { + compatible = "sirf,nocfw-gnssm"; + reg = <0x18100000 0x3000>; + }; + + uart0: uart@18010000 { + cell-index = <0>; + compatible = "sirf,atlas7-uart"; + reg = <0x18010000 0x1000>; + interrupts = <0 17 0>; + clocks = <&car 90>; + fifosize = <128>; + dmas = <&dmac0 3>, <&dmac0 2>; + dma-names = "rx", "tx"; + }; + + uart1: uart@18020000 { + cell-index = <1>; + compatible = "sirf,atlas7-uart"; + reg = <0x18020000 0x1000>; + interrupts = <0 18 0>; + clocks = <&car 88>; + fifosize = <32>; + }; + + uart2: uart@18030000 { + cell-index = <2>; + compatible = "sirf,atlas7-uart"; + reg = <0x18030000 0x1000>; + interrupts = <0 19 0>; + clocks = <&car 91>; + fifosize = <128>; + dmas = <&dmac0 6>, <&dmac0 7>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + uart3: uart@18040000 { + cell-index = <3>; + compatible = "sirf,atlas7-uart"; + reg = <0x18040000 0x1000>; + interrupts = <0 66 0>; + clocks = <&car 92>; + fifosize = <128>; + dmas = <&dmac0 4>, <&dmac0 5>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + uart4: uart@18050000 { + cell-index = <4>; + compatible = "sirf,atlas7-uart"; + reg = <0x18050000 0x1000>; + interrupts = <0 69 0>; + clocks = <&car 93>; + fifosize = <128>; + dmas = <&dmac0 0>, <&dmac0 1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + uart5: uart@18060000 { + cell-index = <5>; + compatible = "sirf,atlas7-uart"; + reg = <0x18060000 0x1000>; + interrupts = <0 71 0>; + clocks = <&car 94>; + fifosize = <128>; + dmas = <&dmac0 8>, <&dmac0 9>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + dspub@18250000 { + compatible = "dx,cc44p"; + reg = <0x18250000 0x10000>; + interrupts = <0 27 0>; + }; + + spi1: spi@18200000 { + compatible = "sirf,prima2-spi"; + reg = <0x18200000 0x1000>; + interrupts = <0 16 0>; + clocks = <&car 95>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmac0 12>, <&dmac0 13>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + }; + + + gpum { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x13000000 0x13000000 0x3000>; + gpum@0x13000000 { + compatible = "sirf,nocfw-gpum"; + reg = <0x13000000 0x3000>; + }; + }; + + mediam { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x16000000 0x16000000 0x00200000>, + <0x17020000 0x17020000 0x1000>, + <0x17030000 0x17030000 0x1000>, + <0x17040000 0x17040000 0x1000>, + <0x17050000 0x17050000 0x10000>, + <0x17060000 0x17060000 0x200>, + <0x17060200 0x17060200 0x100>, + <0x17070000 0x17070000 0x200>, + <0x17070200 0x17070200 0x100>, + <0x170A0000 0x170A0000 0x3000>; + + mediam@170A0000 { + compatible = "sirf,nocfw-mediam"; + reg = <0x170A0000 0x3000>; + }; + + gpio_0: gpio_mediam@17040000 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "sirf,atlas7-gpio"; + reg = <0x17040000 0x1000>; + interrupts = <0 13 0>, <0 14 0>; + clocks = <&car 107>; + clock-names = "gpio0_io"; + gpio-controller; + interrupt-controller; + }; + + nand@17050000 { + compatible = "sirf,atlas7-nand"; + reg = <0x17050000 0x10000>; + interrupts = <0 41 0>; + clocks = <&car 108>, <&car 112>; + clock-names = "nand_io", "nand_nand"; + }; + + sd0: sdhci@16000000 { + cell-index = <0>; + compatible = "sirf,atlas7-sdhc"; + reg = <0x16000000 0x100000>; + interrupts = <0 38 0>; + clocks = <&car 109>, <&car 111>; + clock-names = "core", "iface"; + wp-inverted; + non-removable; + status = "disabled"; + bus-width = <8>; + }; + + sd1: sdhci@16100000 { + cell-index = <1>; + compatible = "sirf,atlas7-sdhc"; + reg = <0x16100000 0x100000>; + interrupts = <0 38 0>; + clocks = <&car 109>, <&car 111>; + clock-names = "core", "iface"; + non-removable; + status = "disabled"; + bus-width = <8>; + }; + + usb0: usb@17060000 { + cell-index = <0>; + compatible = "sirf,atlas7-usb"; + reg = <0x17060000 0x200>; + interrupts = <0 10 0>; + clocks = <&car 113>; + sirf,usbphy = <&usbphy0>; + phy_type = "utmi"; + dr_mode = "otg"; + maximum-speed = "high-speed"; + status = "okay"; + }; + + usb1: usb@17070000 { + cell-index = <1>; + compatible = "sirf,atlas7-usb"; + reg = <0x17070000 0x200>; + interrupts = <0 11 0>; + clocks = <&car 114>; + sirf,usbphy = <&usbphy1>; + phy_type = "utmi"; + dr_mode = "host"; + maximum-speed = "high-speed"; + status = "okay"; + }; + + usbphy0: usbphy@0 { + compatible = "sirf,atlas7-usbphy"; + reg = <0x17060200 0x100>; + clocks = <&car 115>; + status = "okay"; + }; + + usbphy1: usbphy@1 { + compatible = "sirf,atlas7-usbphy"; + reg = <0x17070200 0x100>; + clocks = <&car 116>; + status = "okay"; + }; + + i2c0: i2c@17020000 { + cell-index = <0>; + compatible = "sirf,prima2-i2c"; + reg = <0x17020000 0x1000>; + interrupts = <0 24 0>; + clocks = <&car 105>; + #address-cells = <1>; + #size-cells = <0>; + }; + + }; + + vdifm { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x13290000 0x13290000 0x3000>, + <0x13300000 0x13300000 0x1000>, + <0x14200000 0x14200000 0x600000>; + + vdifm@13290000 { + compatible = "sirf,nocfw-vdifm"; + reg = <0x13290000 0x3000>; + }; + + gpio_1: gpio_vdifm@13300000 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "sirf,atlas7-gpio"; + reg = <0x13300000 0x1000>; + interrupts = <0 43 0>, <0 44 0>, <0 45 0>; + clocks = <&car 84>; + clock-names = "gpio1_io"; + gpio-controller; + interrupt-controller; + }; + + sd2: sdhci@14200000 { + cell-index = <2>; + compatible = "sirf,atlas7-sdhc"; + reg = <0x14200000 0x100000>; + interrupts = <0 23 0>; + clocks = <&car 70>, <&car 75>; + clock-names = "core", "iface"; + status = "disabled"; + bus-width = <4>; + sd-uhs-sdr50; + vqmmc-supply = <&vqmmc>; + vqmmc: vqmmc@2 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-name = "vqmmc-ldo"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-allow-bypass; + }; + }; + + sd3: sdhci@14300000 { + cell-index = <3>; + compatible = "sirf,atlas7-sdhc"; + reg = <0x14300000 0x100000>; + interrupts = <0 23 0>; + clocks = <&car 76>, <&car 81>; + clock-names = "core", "iface"; + status = "disabled"; + bus-width = <4>; + }; + + sd5: sdhci@14500000 { + cell-index = <5>; + compatible = "sirf,atlas7-sdhc"; + reg = <0x14500000 0x100000>; + interrupts = <0 39 0>; + clocks = <&car 71>, <&car 76>; + clock-names = "core", "iface"; + status = "disabled"; + bus-width = <4>; + loop-dma; + }; + + sd6: sdhci@14600000 { + cell-index = <6>; + compatible = "sirf,atlas7-sdhc"; + reg = <0x14600000 0x100000>; + interrupts = <0 98 0>; + clocks = <&car 72>, <&car 77>; + clock-names = "core", "iface"; + status = "disabled"; + bus-width = <4>; + }; + + sd7: sdhci@14700000 { + cell-index = <7>; + compatible = "sirf,atlas7-sdhc"; + reg = <0x14700000 0x100000>; + interrupts = <0 98 0>; + clocks = <&car 72>, <&car 77>; + clock-names = "core", "iface"; + status = "disabled"; + bus-width = <4>; + }; + }; + + audiom { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x10d50000 0x10d50000 0x0000ffff>, + <0x10d60000 0x10d60000 0x0000ffff>, + <0x10d80000 0x10d80000 0x0000ffff>, + <0x10d90000 0x10d90000 0x0000ffff>, + <0x10ED0000 0x10ED0000 0x3000>, + <0x10dc8000 0x10dc8000 0x1000>, + <0x10dc0000 0x10dc0000 0x1000>, + <0x10db0000 0x10db0000 0x4000>, + <0x10d40000 0x10d40000 0x1000>, + <0x10d30000 0x10d30000 0x1000>; + + timer@10dc0000 { + compatible = "sirf,atlas7-tick"; + reg = <0x10dc0000 0x1000>; + interrupts = <0 0 0>, + <0 1 0>, + <0 2 0>, + <0 49 0>, + <0 50 0>, + <0 51 0>; + clocks = <&car 47>; + }; + + timerb@10dc8000 { + compatible = "sirf,atlas7-tick"; + reg = <0x10dc8000 0x1000>; + interrupts = <0 74 0>, + <0 75 0>, + <0 76 0>, + <0 77 0>, + <0 78 0>, + <0 79 0>; + clocks = <&car 47>; + }; + + vip0@10db0000 { + compatible = "sirf,atlas7-vip0"; + reg = <0x10db0000 0x2000>; + interrupts = <0 85 0>; + sirf,vip_cma_size = <0xC00000>; + }; + + cvd@10db2000 { + compatible = "sirf,cvd"; + reg = <0x10db2000 0x2000>; + clocks = <&car 46>; + }; + + dmac2: dma-controller@10d50000 { + cell-index = <2>; + compatible = "sirf,atlas7-dmac"; + reg = <0x10d50000 0xffff>; + interrupts = <0 55 0>; + clocks = <&car 60>; + dma-channels = <16>; + #dma-cells = <1>; + }; + + dmac3: dma-controller@10d60000 { + cell-index = <3>; + compatible = "sirf,atlas7-dmac"; + reg = <0x10d60000 0xffff>; + interrupts = <0 56 0>; + clocks = <&car 61>; + dma-channels = <16>; + #dma-cells = <1>; + }; + + adc: adc@10d80000 { + compatible = "sirf,atlas7-adc"; + reg = <0x10d80000 0xffff>; + interrupts = <0 34 0>; + clocks = <&car 49>; + #io-channel-cells = <1>; + }; + + pulsec@10d90000 { + compatible = "sirf,prima2-pulsec"; + reg = <0x10d90000 0xffff>; + interrupts = <0 42 0>; + clocks = <&car 54>; + }; + + audiom@10ED0000 { + compatible = "sirf,nocfw-audiom"; + reg = <0x10ED0000 0x3000>; + interrupts = <0 102 0>; + }; + + usp1: usp@10d30000 { + cell-index = <1>; + reg = <0x10d30000 0x1000>; + fifosize = <512>; + clocks = <&car 58>; + dmas = <&dmac2 6>, <&dmac2 7>; + dma-names = "rx", "tx"; + }; + + usp2: usp@10d40000 { + cell-index = <2>; + reg = <0x10d40000 0x1000>; + interrupts = <0 22 0>; + clocks = <&car 59>; + dmas = <&dmac2 12>, <&dmac2 13>; + dma-names = "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + ddrm { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x10820000 0x10820000 0x3000>, + <0x10800000 0x10800000 0x2000>; + ddrm@10820000 { + compatible = "sirf,nocfw-ddrm"; + reg = <0x10820000 0x3000>; + interrupts = <0 105 0>; + }; + + memory-controller@0x10800000 { + compatible = "sirf,atlas7-memc"; + reg = <0x10800000 0x2000>; + }; + + }; + + btm { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x11002000 0x11002000 0x0000ffff>, + <0x11010000 0x11010000 0x3000>, + <0x11000000 0x11000000 0x1000>, + <0x11001000 0x11001000 0x1000>; + + dmac4: dma-controller@11002000 { + cell-index = <4>; + compatible = "sirf,atlas7-dmac"; + reg = <0x11002000 0x1000>; + interrupts = <0 99 0>; + clocks = <&car 130>; + dma-channels = <16>; + #dma-cells = <1>; + }; + uart6: uart@11000000 { + cell-index = <6>; + compatible = "sirf,atlas7-bt-uart", + "sirf,atlas7-uart"; + reg = <0x11000000 0x1000>; + interrupts = <0 100 0>; + clocks = <&car 131>, <&car 133>, <&car 134>; + clock-names = "uart", "general", "noc"; + fifosize = <128>; + dmas = <&dmac4 12>, <&dmac4 13>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + usp3: usp@11001000 { + compatible = "sirf,atlas7-bt-usp", + "sirf,prima2-usp-pcm"; + cell-index = <3>; + reg = <0x11001000 0x1000>; + fifosize = <512>; + clocks = <&car 132>, <&car 129>, <&car 133>, + <&car 134>, <&car 135>; + clock-names = "usp3_io", "a7ca_btss", "a7ca_io", + "noc_btm_io", "thbtm_io"; + dmas = <&dmac4 0>, <&dmac4 1>; + dma-names = "rx", "tx"; + }; + + btm@11010000 { + compatible = "sirf,nocfw-btm"; + reg = <0x11010000 0x3000>; + }; + }; + + rtcm { + compatible = "arteris, flexnoc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x18810000 0x18810000 0x3000>, + <0x18840000 0x18840000 0x1000>, + <0x18890000 0x18890000 0x1000>, + <0x188B0000 0x188B0000 0x10000>, + <0x188D0000 0x188D0000 0x1000>; + rtcm@18810000 { + compatible = "sirf,nocfw-rtcm"; + reg = <0x18810000 0x3000>; + interrupts = <0 109 0>; + }; + + gpio_2: gpio_rtcm@18890000 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "sirf,atlas7-gpio"; + reg = <0x18890000 0x1000>; + interrupts = <0 47 0>; + gpio-controller; + interrupt-controller; + }; + + rtc-iobg@18840000 { + compatible = "sirf,prima2-rtciobg", + "sirf-prima2-rtciobg-bus", + "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x18840000 0x1000>; + + sysrtc@2000 { + compatible = "sirf,prima2-sysrtc"; + reg = <0x2000 0x100>; + interrupts = <0 52 0>; + }; + pwrc@3000 { + compatible = "sirf,atlas7-pwrc"; + reg = <0x3000 0x100>; + }; + }; + + qspi: flash@188B0000 { + cell-index = <0>; + compatible = "sirf,atlas7-qspi-nor"; + reg = <0x188B0000 0x10000>; + interrupts = <0 15 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + retain@0x188D0000 { + compatible = "sirf,atlas7-retain"; + reg = <0x188D0000 0x1000>; + }; + + }; + disp-iobg { + /* lcdc0 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x13100000 0x13100000 0x20000>, + <0x10e10000 0x10e10000 0x10000>; + + lcd@13100000 { + compatible = "sirf,atlas7-lcdc"; + reg = <0x13100000 0x10000>; + interrupts = <0 30 0>; + clocks = <&car 79>; + }; + vpp@13110000 { + compatible = "sirf,atlas7-vpp"; + reg = <0x13110000 0x10000>; + interrupts = <0 31 0>; + clocks = <&car 78>; + resets = <&car 29>; + }; + lvds@10e10000 { + compatible = "sirf,atlas7-lvdsc"; + reg = <0x10e10000 0x10000>; + interrupts = <0 64 0>; + clocks = <&car 54>; + resets = <&car 29>; + }; + + }; + + graphics-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x12000000 0x12000000 0x1000000>; + + graphics@12000000 { + compatible = "powervr,sgx531"; + reg = <0x12000000 0x1000000>; + interrupts = <0 6 0>; + clocks = <&car 126>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi new file mode 100644 index 000000000000..c20cf537f5a5 --- /dev/null +++ b/arch/arm/boot/dts/axp209.dtsi @@ -0,0 +1,97 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * AXP202/209 Integrated Power Management Chip + * http://www.x-powers.com/product/AXP20X.php + * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf + */ + +&axp209 { + compatible = "x-powers,axp209"; + interrupt-controller; + #interrupt-cells = <1>; + + regulators { + /* Default work frequency for buck regulators */ + x-powers,dcdc-freq = <1500>; + + reg_dcdc2: dcdc2 { + regulator-name = "dcdc2"; + }; + + reg_dcdc3: dcdc3 { + regulator-name = "dcdc3"; + }; + + reg_ldo1: ldo1 { + /* LDO1 is a fixed output regulator */ + regulator-always-on; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-name = "ldo1"; + }; + + reg_ldo2: ldo2 { + regulator-name = "ldo2"; + }; + + reg_ldo3: ldo3 { + regulator-name = "ldo3"; + }; + + reg_ldo4: ldo4 { + regulator-name = "ldo4"; + }; + + reg_ldo5: ldo5 { + regulator-name = "ldo5"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 5126f9e77a98..ff5fb6ab0b97 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -70,6 +70,26 @@ }; }; + i2c0: i2c@18008000 { + compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; + reg = <0x18008000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@1800b000 { + compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; + reg = <0x1800b000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>; + clock-frequency = <100000>; + status = "disabled"; + }; + uart0: serial@18020000 { compatible = "snps,dw-apb-uart"; reg = <0x18020000 0x100>; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index 5fc0fae03092..b359c1e6178e 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -23,11 +23,77 @@ reg = <0x00000000 0x08000000>; }; + spi { + compatible = "spi-gpio"; + num-chipselects = <1>; + gpio-sck = <&chipcommon 7 0>; + gpio-mosi = <&chipcommon 4 0>; + cs-gpios = <&chipcommon 6 0>; + #address-cells = <1>; + #size-cells = <0>; + + hc595: gpio_spi@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + registers-number = <1>; + spi-max-frequency = <100000>; + + gpio-controller; + #gpio-cells = <2>; + + }; + }; + + leds { + compatible = "gpio-leds"; + + power0 { + label = "bcm53xx:red:power"; + gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + power1 { + label = "bcm53xx:white:power"; + gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + router0 { + label = "bcm53xx:blue:router"; + gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + router1 { + label = "bcm53xx:amber:router"; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wan { + label = "bcm53xx:blue:wan"; + gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + wireless0 { + label = "bcm53xx:blue:wireless"; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wireless1 { + label = "bcm53xx:amber:wireless"; + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + }; + gpio-keys { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - poll-interval = <200>; restart { label = "Reset"; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts new file mode 100644 index 000000000000..946c728c4eb7 --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -0,0 +1,60 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Luxul XWC-1000 + * + * Copyright 2014 Luxul Inc. + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" + +/ { + compatible = "luxul,xwc-1000", "brcm,bcm4708"; + model = "Luxul XWC-1000 (BCM4708)"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + axi@18000000 { + nand@28000 { + reg = <0x00028000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi"; + reg = <0x00000000 0x08000000>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 4ed7de1058b7..f18c9d9b2f2c 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -71,7 +71,6 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - poll-interval = <200>; wps { label = "WPS"; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 12fc2a01e6ab..39910428246a 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -61,7 +61,6 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - poll-interval = <200>; wps { label = "WPS"; diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index fb76378bd511..0ee85ea10bb2 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -61,7 +61,6 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - poll-interval = <200>; restart { label = "Reset"; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index bbb414fbad65..db9131e03268 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -23,11 +23,77 @@ reg = <0x00000000 0x08000000>; }; + spi { + compatible = "spi-gpio"; + num-chipselects = <1>; + gpio-sck = <&chipcommon 7 0>; + gpio-mosi = <&chipcommon 4 0>; + cs-gpios = <&chipcommon 6 0>; + #address-cells = <1>; + #size-cells = <0>; + + hc595: gpio_spi@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + registers-number = <1>; + spi-max-frequency = <100000>; + + gpio-controller; + #gpio-cells = <2>; + + }; + }; + + leds { + compatible = "gpio-leds"; + + power0 { + label = "bcm53xx:green:power"; + gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + power1 { + label = "bcm53xx:red:power"; + gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + router0 { + label = "bcm53xx:green:router"; + gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + router1 { + label = "bcm53xx:amber:router"; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wan { + label = "bcm53xx:green:wan"; + gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + wireless0 { + label = "bcm53xx:green:wireless"; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wireless1 { + label = "bcm53xx:amber:wireless"; + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + }; + gpio-keys { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - poll-interval = <200>; aoss { label = "AOSS"; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts new file mode 100644 index 000000000000..7d6868acb1c6 --- /dev/null +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -0,0 +1,37 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Buffalo WZR-900DHP + * + * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm47081.dtsi" + +/ { + compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708"; + model = "Buffalo WZR-900DHP (BCM47081)"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index d2d8e94e0aa2..f46329c8ad75 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -66,8 +66,9 @@ reg = <0x1d000 0x1000>; cache-unified; cache-level = <2>; - cache-sets = <16>; - cache-size = <0x80000>; + cache-size = <524288>; + cache-sets = <1024>; + cache-line-size = <32>; interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 015a06c67c91..63d00a63cfa6 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -104,7 +104,7 @@ local-timer@ad0600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&chip CLKID_TWD>; }; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 230df3b1770e..81b670ac494a 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -45,6 +45,11 @@ ranges = <0 0xf7000000 0x1000000>; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + }; + sdhci0: sdhci@ab0000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0000 0x200>; @@ -71,7 +76,7 @@ local-timer@ad0600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&chip CLKID_TWD>; }; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index e2f61f27944e..be5397288d24 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -63,6 +63,14 @@ ranges = <0 0xf7000000 0x1000000>; interrupt-parent = <&gic>; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + }; + sdhci0: sdhci@ab0000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0000 0x200>; @@ -105,7 +113,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; clocks = <&chip CLKID_TWD>; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; gic: interrupt-controller@ad1000 { diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi new file mode 100644 index 000000000000..490c08075e67 --- /dev/null +++ b/arch/arm/boot/dts/cx92755.dtsi @@ -0,0 +1,113 @@ +/* + * Device Tree Include file for the Conexant Digicolor CX92755 SoC + * + * Author: Baruch Siach <baruch@tkos.co.il> + * + * Copyright (C) 2014 Paradox Innovation Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton.dtsi" + +/ { + compatible = "cnxt,cx92755"; + + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0x0>; + }; + }; + + main_clk: main_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + intc: interrupt-controller@f0000040 { + compatible = "cnxt,cx92755-ic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xf0000040 0x40>; + syscon = <&uc_regs>; + }; + + timer@f0000fc0 { + compatible = "cnxt,cx92755-timer"; + reg = <0xf0000fc0 0x40>; + interrupts = <19>, <31>, <34>, <35>, <52>, <53>, <54>, <55>; + clocks = <&main_clk>; + }; + + uc_regs: syscon@f00003a0 { + compatible = "cnxt,cx92755-uc", "syscon"; + reg = <0xf00003a0 0x10>; + }; + + uart0: uart@f0000740 { + compatible = "cnxt,cx92755-usart"; + reg = <0xf0000740 0x20>; + clocks = <&main_clk>; + interrupts = <44>; + status = "disabled"; + }; + + uart1: uart@f0000760 { + compatible = "cnxt,cx92755-usart"; + reg = <0xf0000760 0x20>; + clocks = <&main_clk>; + interrupts = <45>; + status = "disabled"; + }; + + uart2: uart@f0000780 { + compatible = "cnxt,cx92755-usart"; + reg = <0xf0000780 0x20>; + clocks = <&main_clk>; + interrupts = <46>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cx92755_equinox.dts new file mode 100644 index 000000000000..f33bf5635d47 --- /dev/null +++ b/arch/arm/boot/dts/cx92755_equinox.dts @@ -0,0 +1,74 @@ +/* + * Device Tree file for the Conexant Equinox CX92755 EVK + * + * Author: Baruch Siach <baruch@tkos.co.il> + * + * Copyright (C) 2014 Paradox Innovation Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "cx92755.dtsi" + +/ { + model = "Conexant Equinox CX92755 EVK"; + compatible = "cnxt,equinox", "cnxt,cx92755"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + + memory@0 { + reg = <0 0x8000000>; + device_type = "memory"; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts new file mode 100644 index 000000000000..d3a29c1b8417 --- /dev/null +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -0,0 +1,154 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dm816x.dtsi" + +/ { + model = "DM8168 EVM"; + compatible = "ti,dm8168-evm", "ti,dm8168"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000 /* 1 GB */ + 0xc0000000 0x40000000>; /* 1 GB */ + }; + + /* FDC6331L controlled by SD_POW pin */ + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&dm816x_pinmux { + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0a94, PIN_INPUT | MUX_MODE0) /* SPI_SCLK */ + DM816X_IOPAD(0x0a98, PIN_OUTPUT | MUX_MODE0) /* SPI_SCS0 */ + DM816X_IOPAD(0x0aa8, PIN_INPUT | MUX_MODE0) /* SPI_D0 */ + DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0) /* SPI_D1 */ + >; + }; + + usb0_pins: pinmux_usb0_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0d00, MUX_MODE0) /* USB0_DRVVBUS */ + >; + }; + + usb1_pins: pinmux_usb0_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB1_DRVVBUS */ + >; + }; +}; + +&i2c1 { + extgpio0: pcf8575@20 { + compatible = "nxp,pcf8575"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c2 { + extgpio1: pcf8575@20 { + compatible = "nxp,pcf8575"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&gpmc { + ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ + + nand@0,0 { + linux,mtd-name= "micron,mt29f2g16aadwp"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + #address-cells = <1>; + #size-cells = <1>; + ti,nand-ecc-opt = "bch8"; + nand-bus-width = <16>; + gpmc,device-width = <2>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wait-on-read = "true"; + gpmc,wait-on-write = "true"; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + partition@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + partition@0x80000 { + label = "U-Boot"; + reg = <0x80000 0x1c0000>; + }; + partition@0x1c0000 { + label = "Environment"; + reg = <0x240000 0x40000>; + }; + partition@0x280000 { + label = "Kernel"; + reg = <0x280000 0x500000>; + }; + partition@0x780000 { + label = "Filesystem"; + reg = <0x780000 0xf880000>; + }; + }; +}; + +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; + + m25p80@0 { + compatible = "w25x32"; + spi-max-frequency = <48000000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* At least dm8168-evm rev c won't support multipoint, later may */ +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + mentor,multipoint = <0>; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; + mentor,multipoint = <0>; +}; diff --git a/arch/arm/boot/dts/dm816x-clocks.dtsi b/arch/arm/boot/dts/dm816x-clocks.dtsi new file mode 100644 index 000000000000..50d9d338fbe9 --- /dev/null +++ b/arch/arm/boot/dts/dm816x-clocks.dtsi @@ -0,0 +1,250 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&scrm { + main_fapll: main_fapll { + #clock-cells = <1>; + compatible = "ti,dm816-fapll-clock"; + reg = <0x400 0x40>; + clocks = <&sys_clkin_ck &sys_clkin_ck>; + clock-indices = <1>, <2>, <3>, <4>, <5>, + <6>, <7>; + clock-output-names = "main_pll_clk1", + "main_pll_clk2", + "main_pll_clk3", + "main_pll_clk4", + "main_pll_clk5", + "main_pll_clk6", + "main_pll_clk7"; + }; + + ddr_fapll: ddr_fapll { + #clock-cells = <1>; + compatible = "ti,dm816-fapll-clock"; + reg = <0x440 0x30>; + clocks = <&sys_clkin_ck &sys_clkin_ck>; + clock-indices = <1>, <2>, <3>, <4>; + clock-output-names = "ddr_pll_clk1", + "ddr_pll_clk2", + "ddr_pll_clk3", + "ddr_pll_clk4"; + }; + + video_fapll: video_fapll { + #clock-cells = <1>; + compatible = "ti,dm816-fapll-clock"; + reg = <0x470 0x30>; + clocks = <&sys_clkin_ck &sys_clkin_ck>; + clock-indices = <1>, <2>, <3>; + clock-output-names = "video_pll_clk1", + "video_pll_clk2", + "video_pll_clk3"; + }; + + audio_fapll: audio_fapll { + #clock-cells = <1>; + compatible = "ti,dm816-fapll-clock"; + reg = <0x4a0 0x30>; + clocks = <&main_fapll 7>, < &sys_clkin_ck>; + clock-indices = <1>, <2>, <3>, <4>, <5>; + clock-output-names = "audio_pll_clk1", + "audio_pll_clk2", + "audio_pll_clk3", + "audio_pll_clk4", + "audio_pll_clk5"; + }; +}; + +&scrm_clocks { + secure_32k_ck: secure_32k_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + sys_32k_ck: sys_32k_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + tclkin_ck: tclkin_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + sys_clkin_ck: sys_clkin_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <27000000>; + }; +}; + +/* 0x48180000 */ +&prcm_clocks { + clkout_pre_ck: clkout_pre_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&main_fapll 5 &ddr_fapll 1 &video_fapll 1 + &audio_fapll 1>; + reg = <0x100>; + }; + + clkout_div_ck: clkout_div_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&clkout_pre_ck>; + ti,bit-shift = <3>; + ti,max-div = <8>; + reg = <0x100>; + }; + + clkout_ck: clkout_ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkout_div_ck>; + ti,bit-shift = <7>; + reg = <0x100>; + }; + + /* CM_DPLL clocks p1795 */ + sysclk1_ck: sysclk1_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&main_fapll 1>; + ti,max-div = <7>; + reg = <0x0300>; + }; + + sysclk2_ck: sysclk2_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&main_fapll 2>; + ti,max-div = <7>; + reg = <0x0304>; + }; + + sysclk3_ck: sysclk3_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&main_fapll 3>; + ti,max-div = <7>; + reg = <0x0308>; + }; + + sysclk4_ck: sysclk4_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&main_fapll 4>; + ti,max-div = <1>; + reg = <0x030c>; + }; + + sysclk5_ck: sysclk5_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sysclk4_ck>; + ti,max-div = <1>; + reg = <0x0310>; + }; + + sysclk6_ck: sysclk6_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&main_fapll 4>; + ti,dividers = <2>, <4>; + reg = <0x0314>; + }; + + sysclk10_ck: sysclk10_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&ddr_fapll 2>; + ti,max-div = <7>; + reg = <0x0324>; + }; + + sysclk24_ck: sysclk24_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&main_fapll 5>; + ti,max-div = <7>; + reg = <0x03b4>; + }; + + mpu_ck: mpu_ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sysclk2_ck>; + ti,bit-shift = <1>; + reg = <0x15dc>; + }; + + audio_pll_a_ck: audio_pll_a_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&audio_fapll 1>; + ti,max-div = <7>; + reg = <0x035c>; + }; + + sysclk18_ck: sysclk18_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_32k_ck>, <&audio_pll_a_ck>; + reg = <0x0378>; + }; + + timer1_fck: timer1_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; + reg = <0x0390>; + }; + + timer2_fck: timer2_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; + reg = <0x0394>; + }; + + timer3_fck: timer3_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; + reg = <0x0398>; + }; + + timer4_fck: timer4_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; + reg = <0x039c>; + }; + + timer5_fck: timer5_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; + reg = <0x03a0>; + }; + + timer6_fck: timer6_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; + reg = <0x03a4>; + }; + + timer7_fck: timer7_fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; + reg = <0x03a8>; + }; +}; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi new file mode 100644 index 000000000000..3c97b5f2addc --- /dev/null +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -0,0 +1,418 @@ +/* + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/omap.h> + +#include "skeleton.dtsi" + +/ { + compatible = "ti,dm816"; + interrupt-parent = <&intc>; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + ethernet0 = ð0; + ethernet1 = ð1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "arm,cortex-a8"; + device_type = "cpu"; + reg = <0>; + }; + }; + + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + }; + + /* + * The soc node represents the soc top level view. It is used for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap3-mpu"; + ti,hwmods = "mpu"; + }; + }; + + /* + * XXX: Use a flat representation of the dm816x interconnect. + * The real dm816x interconnect network is quite complex. Since + * it will not bring real advantage to represent that in DT + * for the moment, just use a fake OCP bus entry to represent + * the whole bus hierarchy. + */ + ocp { + compatible = "ti,omap3-l3-smx", "simple-bus"; + reg = <0x44000000 0x10000>; + interrupts = <9 10>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main"; + + prcm: prcm@48180000 { + compatible = "ti,dm816-prcm"; + reg = <0x48180000 0x4000>; + + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prcm_clockdomains: clockdomains { + }; + }; + + scrm: scrm@48140000 { + compatible = "ti,dm816-scrm", "simple-bus"; + reg = <0x48140000 0x21000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48140000 0x21000>; + + dm816x_pinmux: pinmux@800 { + compatible = "pinctrl-single"; + reg = <0x800 0x50a>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xf>; + }; + + /* Device Configuration Registers */ + scm_conf: syscon@600 { + compatible = "syscon", "simple-bus"; + reg = <0x600 0x110>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x600 0x110>; + + usb_phy0: usb-phy@20 { + compatible = "ti,dm8168-usb-phy"; + reg = <0x20 0x8>; + reg-names = "phy"; + clocks = <&main_fapll 6>; + clock-names = "refclk"; + #phy-cells = <0>; + syscon = <&scm_conf>; + }; + + usb_phy1: usb-phy@28 { + compatible = "ti,dm8168-usb-phy"; + reg = <0x28 0x8>; + reg-names = "phy"; + clocks = <&main_fapll 6>; + clock-names = "refclk"; + #phy-cells = <0>; + syscon = <&scm_conf>; + }; + }; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + + edma: edma@49000000 { + compatible = "ti,edma3"; + ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3"; + reg = <0x49000000 0x10000>, + <0x44e10f90 0x40>; + interrupts = <12 13 14>; + #dma-cells = <1>; + }; + + elm: elm@48080000 { + compatible = "ti,816-elm"; + ti,hwmods = "elm"; + reg = <0x48080000 0x2000>; + interrupts = <4>; + }; + + gpio1: gpio@48032000 { + compatible = "ti,omap3-gpio"; + ti,hwmods = "gpio1"; + reg = <0x48032000 0x1000>; + interrupts = <97>; + }; + + gpio2: gpio@4804c000 { + compatible = "ti,omap3-gpio"; + ti,hwmods = "gpio2"; + reg = <0x4804c000 0x1000>; + interrupts = <99>; + }; + + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + ti,hwmods = "gpmc"; + reg = <0x50000000 0x2000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <100>; + gpmc,num-cs = <6>; + gpmc,num-waitpins = <2>; + }; + + i2c1: i2c@48028000 { + compatible = "ti,omap4-i2c"; + ti,hwmods = "i2c1"; + reg = <0x48028000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <70>; + dmas = <&edma 58 &edma 59>; + dma-names = "tx", "rx"; + }; + + i2c2: i2c@4802a000 { + compatible = "ti,omap4-i2c"; + ti,hwmods = "i2c2"; + reg = <0x4802a000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <71>; + dmas = <&edma 60 &edma 61>; + dma-names = "tx", "rx"; + }; + + intc: interrupt-controller@48200000 { + compatible = "ti,dm816-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x48200000 0x1000>; + }; + + mailbox: mailbox@480c8000 { + compatible = "ti,omap4-mailbox"; + reg = <0x480c8000 0x2000>; + interrupts = <77>; + ti,hwmods = "mailbox"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + mbox_dsp: mbox_dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <0 0 0>; + }; + }; + + mdio: mdio@4a100800 { + compatible = "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4a100800 0x100>; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + phy0: ethernet-phy@0 { + reg = <1>; + }; + phy1: ethernet-phy@1 { + reg = <2>; + }; + }; + + eth0: ethernet@4a100000 { + compatible = "ti,dm816-emac"; + ti,hwmods = "emac0"; + reg = <0x4a100000 0x800 + 0x4a100900 0x3700>; + clocks = <&sysclk24_ck>; + syscon = <&scm_conf>; + ti,davinci-ctrl-reg-offset = <0>; + ti,davinci-ctrl-mod-reg-offset = <0x900>; + ti,davinci-ctrl-ram-offset = <0x2000>; + ti,davinci-ctrl-ram-size = <0x2000>; + interrupts = <40 41 42 43>; + phy-handle = <&phy0>; + }; + + eth1: ethernet@4a120000 { + compatible = "ti,dm816-emac"; + ti,hwmods = "emac1"; + reg = <0x4a120000 0x4000>; + clocks = <&sysclk24_ck>; + syscon = <&scm_conf>; + ti,davinci-ctrl-reg-offset = <0>; + ti,davinci-ctrl-mod-reg-offset = <0x900>; + ti,davinci-ctrl-ram-offset = <0x2000>; + ti,davinci-ctrl-ram-size = <0x2000>; + interrupts = <44 45 46 47>; + phy-handle = <&phy1>; + }; + + mcspi1: spi@48030000 { + compatible = "ti,omap4-mcspi"; + reg = <0x48030000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <65>; + ti,spi-num-cs = <4>; + ti,hwmods = "mcspi1"; + dmas = <&edma 16 &edma 17 + &edma 18 &edma 19>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + + mmc1: mmc@48060000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x48060000 0x11000>; + ti,hwmods = "mmc1"; + interrupts = <64>; + dmas = <&edma 24 &edma 25>; + dma-names = "tx", "rx"; + }; + + timer1: timer@4802e000 { + compatible = "ti,dm816-timer"; + reg = <0x4802e000 0x2000>; + interrupts = <67>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48040000 { + compatible = "ti,dm816-timer"; + reg = <0x48040000 0x2000>; + interrupts = <68>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48042000 { + compatible = "ti,dm816-timer"; + reg = <0x48042000 0x2000>; + interrupts = <69>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48044000 { + compatible = "ti,dm816-timer"; + reg = <0x48044000 0x2000>; + interrupts = <92>; + ti,hwmods = "timer4"; + }; + + timer5: timer@48046000 { + compatible = "ti,dm816-timer"; + reg = <0x48046000 0x2000>; + interrupts = <93>; + ti,hwmods = "timer5"; + }; + + timer6: timer@48048000 { + compatible = "ti,dm816-timer"; + reg = <0x48048000 0x2000>; + interrupts = <94>; + ti,hwmods = "timer6"; + }; + + timer7: timer@4804a000 { + compatible = "ti,dm816-timer"; + reg = <0x4804a000 0x2000>; + interrupts = <95>; + ti,hwmods = "timer7"; + }; + + uart1: uart@48020000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart1"; + reg = <0x48020000 0x2000>; + clock-frequency = <48000000>; + interrupts = <72>; + dmas = <&edma 26 &edma 27>; + dma-names = "tx", "rx"; + }; + + uart2: uart@48022000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart2"; + reg = <0x48022000 0x2000>; + clock-frequency = <48000000>; + interrupts = <73>; + dmas = <&edma 28 &edma 29>; + dma-names = "tx", "rx"; + }; + + uart3: uart@48024000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart3"; + reg = <0x48024000 0x2000>; + clock-frequency = <48000000>; + interrupts = <74>; + dmas = <&edma 30 &edma 31>; + dma-names = "tx", "rx"; + }; + + /* NOTE: USB needs a transceiver driver for phys to work */ + usb: usb_otg_hs@47401000 { + compatible = "ti,am33xx-usb"; + reg = <0x47401000 0x400000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + ti,hwmods = "usb_otg_hs"; + + usb0: usb@47401000 { + compatible = "ti,musb-am33xx"; + reg = <0x47401400 0x400 + 0x47401000 0x200>; + reg-names = "mc", "control"; + interrupts = <18>; + interrupt-names = "mc"; + dr_mode = "host"; + interface-type = <0>; + phys = <&usb_phy0>; + phy-names = "usb2-phy"; + mentor,multipoint = <1>; + mentor,num-eps = <16>; + mentor,ram-bits = <12>; + mentor,power = <500>; + }; + + usb1: usb@47401800 { + compatible = "ti,musb-am33xx"; + reg = <0x47401c00 0x400 + 0x47401800 0x200>; + reg-names = "mc", "control"; + interrupts = <19>; + interrupt-names = "mc"; + dr_mode = "host"; + interface-type = <0>; + phys = <&usb_phy1>; + phy-names = "usb2-phy"; + mentor,multipoint = <1>; + mentor,num-eps = <16>; + mentor,ram-bits = <12>; + mentor,power = <500>; + }; + }; + + wd_timer2: wd_timer@480c2000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer"; + reg = <0x480c2000 0x1000>; + interrupts = <0>; + }; + }; +}; + +#include "dm816x-clocks.dtsi" diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index ad4118f7e1a6..7563d7ce01bb 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -26,6 +26,16 @@ regulator-max-microvolt = <3300000>; }; + extcon_usb1: extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; + }; + + extcon_usb2: extcon_usb2 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; + }; + vtt_fixed: fixedregulator-vtt { compatible = "regulator-fixed"; regulator-name = "vtt_fixed"; @@ -253,17 +263,15 @@ dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < - 0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ - 0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */ + 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ + 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; dcan1_pins_sleep: dcan1_pins_sleep { pinctrl-single,pins = < - 0x3d0 (MUX_MODE15) /* dcan1_tx.off */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ - 0x418 (MUX_MODE15) /* wakeup0.off */ + 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ + 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ >; }; }; @@ -391,6 +399,19 @@ }; }; }; + + pcf_gpio_21: gpio@21 { + compatible = "ti,pcf8575"; + reg = <0x21>; + lines-initial-states = <0x1408>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; &i2c2 { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 63f8b007bdc5..127608d79033 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -249,8 +249,8 @@ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <127>; + dma-channels = <32>; + dma-requests = <127>; }; gpio1: gpio@4ae10000 { @@ -1090,8 +1090,8 @@ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_sata>; - clocks = <&sys_clkin1>; - clock-names = "sysclk"; + clocks = <&sys_clkin1>, <&sata_ref_clk>; + clock-names = "sysclk", "refclk"; #phy-cells = <0>; }; @@ -1111,7 +1111,6 @@ "wkupclk", "refclk", "div-clk", "phy-div"; #phy-cells = <0>; - id = <1>; ti,hwmods = "pcie1-phy"; }; @@ -1132,7 +1131,6 @@ "div-clk", "phy-div"; #phy-cells = <0>; ti,hwmods = "pcie2-phy"; - id = <2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 89085d066c65..40ed539ce474 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "dra72x.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "TI DRA722"; @@ -24,6 +25,16 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + extcon_usb1: extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; + }; + + extcon_usb2: extcon_usb2 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; + }; }; &dra7_pmx_core { @@ -108,17 +119,27 @@ dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < - 0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ - 0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */ + 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ + 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; dcan1_pins_sleep: dcan1_pins_sleep { pinctrl-single,pins = < - 0x3d0 (MUX_MODE15) /* dcan1_tx.off */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ - 0x418 (MUX_MODE15) /* wakeup0.off */ + 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ + 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ + >; + }; + + qspi1_pins: pinmux_qspi1_pins { + pinctrl-single,pins = < + 0x74 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ + 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */ + 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */ + 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */ + 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */ + 0x88 (PIN_OUTPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ + 0xb8 (PIN_OUTPUT | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ >; }; }; @@ -243,6 +264,18 @@ ti,palmas-long-press-seconds = <6>; }; }; + + pcf_gpio_21: gpio@21 { + compatible = "ti,pcf8575"; + reg = <0x21>; + lines-initial-states = <0x1408>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; &uart1 { @@ -461,3 +494,68 @@ pinctrl-0 = <&dcan1_pins_default>; pinctrl-1 = <&dcan1_pins_sleep>; }; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi1_pins>; + + spi-max-frequency = <48000000>; + m25p80@0 { + compatible = "s25fl256s1"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-cpol; + spi-cpha; + #address-cells = <1>; + #size-cells = <1>; + + /* MTD partition table. + * The ROM checks the first four physical blocks + * for a valid file to boot and the flash here is + * 64KiB block size. + */ + partition@0 { + label = "QSPI.SPL"; + reg = <0x00000000 0x000010000>; + }; + partition@1 { + label = "QSPI.SPL.backup1"; + reg = <0x00010000 0x00010000>; + }; + partition@2 { + label = "QSPI.SPL.backup2"; + reg = <0x00020000 0x00010000>; + }; + partition@3 { + label = "QSPI.SPL.backup3"; + reg = <0x00030000 0x00010000>; + }; + partition@4 { + label = "QSPI.u-boot"; + reg = <0x00040000 0x00100000>; + }; + partition@5 { + label = "QSPI.u-boot-spl-os"; + reg = <0x00140000 0x00080000>; + }; + partition@6 { + label = "QSPI.u-boot-env"; + reg = <0x001c0000 0x00010000>; + }; + partition@7 { + label = "QSPI.u-boot-env.backup1"; + reg = <0x001d0000 0x0010000>; + }; + partition@8 { + label = "QSPI.kernel"; + reg = <0x001e0000 0x0800000>; + }; + partition@9 { + label = "QSPI.file-system"; + reg = <0x009e0000 0x01620000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 4bdcbd61ce47..99b09a44e269 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -243,10 +243,18 @@ ti,invert-autoidle-bit; }; + dpll_core_byp_mux: dpll_core_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x012c>; + }; + dpll_core_ck: dpll_core_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_core_byp_mux>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; @@ -309,10 +317,18 @@ clock-div = <1>; }; + dpll_dsp_byp_mux: dpll_dsp_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x0240>; + }; + dpll_dsp_ck: dpll_dsp_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>; reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>; }; @@ -335,10 +351,18 @@ clock-div = <1>; }; + dpll_iva_byp_mux: dpll_iva_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x01ac>; + }; + dpll_iva_ck: dpll_iva_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; }; @@ -361,10 +385,18 @@ clock-div = <1>; }; + dpll_gpu_byp_mux: dpll_gpu_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x02e4>; + }; + dpll_gpu_ck: dpll_gpu_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>; reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>; }; @@ -398,10 +430,18 @@ clock-div = <1>; }; + dpll_ddr_byp_mux: dpll_ddr_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x021c>; + }; + dpll_ddr_ck: dpll_ddr_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>; reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>; }; @@ -416,10 +456,18 @@ ti,invert-autoidle-bit; }; + dpll_gmac_byp_mux: dpll_gmac_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x02b4>; + }; + dpll_gmac_ck: dpll_gmac_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>; reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>; }; @@ -482,10 +530,18 @@ clock-div = <1>; }; + dpll_eve_byp_mux: dpll_eve_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x0290>; + }; + dpll_eve_ck: dpll_eve_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>; reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>; }; @@ -1249,10 +1305,18 @@ clock-div = <1>; }; + dpll_per_byp_mux: dpll_per_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x014c>; + }; + dpll_per_ck: dpll_per_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; @@ -1275,10 +1339,18 @@ clock-div = <1>; }; + dpll_usb_byp_mux: dpll_usb_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x018c>; + }; + dpll_usb_ck: dpll_usb_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; - clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts index 8f941c2db7c6..243044343ee8 100644 --- a/arch/arm/boot/dts/ethernut5.dts +++ b/arch/arm/boot/dts/ethernut5.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -#include "at91sam9260.dtsi" +#include "at91sam9xe.dtsi" / { model = "Ethernut 5"; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 24822aa98057..1d483c1c8b48 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -15,6 +15,7 @@ /dts-v1/; #include "exynos3250.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Samsung Monk board"; @@ -37,9 +38,7 @@ compatible = "gpio-keys"; power_key { - interrupt-parent = <&gpx2>; - interrupts = <7 0>; - gpios = <&gpx2 7 1>; + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "power key"; debounce-interval = <10>; @@ -109,6 +108,13 @@ }; }; }; + + haptics { + compatible = "regulator-haptic"; + haptic-supply = <&motor_reg>; + min-microvolt = <1100000>; + max-microvolt = <2700000>; + }; }; &adc { @@ -134,6 +140,17 @@ }; }; +&exynos_usbphy { + status = "okay"; +}; + +&hsotg { + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + &i2c_0 { #address-cells = <1>; #size-cells = <0>; @@ -420,6 +437,46 @@ status = "okay"; }; +&ppmu_dmc0 { + status = "okay"; + + events { + ppmu_dmc0_3: ppmu-event3-dmc0 { + event-name = "ppmu-event3-dmc0"; + }; + }; +}; + +&ppmu_dmc1 { + status = "okay"; + + events { + ppmu_dmc1_3: ppmu-event3-dmc1 { + event-name = "ppmu-event3-dmc1"; + }; + }; +}; + +&ppmu_leftbus { + status = "okay"; + + events { + ppmu_leftbus_3: ppmu-event3-leftbus { + event-name = "ppmu-event3-leftbus"; + }; + }; +}; + +&ppmu_rightbus { + status = "okay"; + + events { + ppmu_rightbus_3: ppmu-event3-rightbus { + event-name = "ppmu-event3-rightbus"; + }; + }; +}; + &xusbxti { clock-frequency = <24000000>; }; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 80aa8b4c4a3d..0b9906880c0c 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -15,6 +15,7 @@ /dts-v1/; #include "exynos3250.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Samsung Rinato board"; @@ -37,9 +38,7 @@ compatible = "gpio-keys"; power_key { - interrupt-parent = <&gpx2>; - interrupts = <7 0>; - gpios = <&gpx2 7 1>; + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "power key"; debounce-interval = <10>; @@ -100,6 +99,13 @@ }; }; }; + + haptics { + compatible = "regulator-haptic"; + haptic-supply = <&motor_reg>; + min-microvolt = <1100000>; + max-microvolt = <2700000>; + }; }; &adc { @@ -125,6 +131,87 @@ }; }; +&exynos_usbphy { + status = "okay"; +}; + +&hsotg { + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&dsi_0 { + vddcore-supply = <&ldo6_reg>; + vddio-supply = <&ldo6_reg>; + samsung,pll-clock-frequency = <24000000>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi_out: endpoint { + remote-endpoint = <&dsi_in>; + samsung,burst-clock-frequency = <250000000>; + samsung,esc-clock-frequency = <20000000>; + }; + }; + }; + + panel@0 { + compatible = "samsung,s6e63j0x03"; + reg = <0>; + vdd3-supply = <&ldo16_reg>; + vci-supply = <&ldo20_reg>; + reset-gpios = <&gpe0 1 0>; + te-gpios = <&gpx0 6 0>; + power-on-delay= <30>; + power-off-delay= <120>; + reset-delay = <5>; + init-delay = <100>; + flip-horizontal; + flip-vertical; + panel-width-mm = <29>; + panel-height-mm = <29>; + + display-timings { + timing-0 { + clock-frequency = <0>; + hactive = <320>; + vactive = <320>; + hfront-porch = <1>; + hback-porch = <1>; + hsync-len = <1>; + vfront-porch = <150>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + + port { + dsi_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&fimd { + status = "okay"; + + i80-if-timings { + cs-setup = <0>; + wr-setup = <0>; + wr-act = <1>; + wr-hold = <0>; + }; +}; + &i2c_0 { #address-cells = <1>; #size-cells = <0>; @@ -523,6 +610,46 @@ status = "okay"; }; +&ppmu_dmc0 { + status = "okay"; + + events { + ppmu_dmc0_3: ppmu-event3-dmc0 { + event-name = "ppmu-event3-dmc0"; + }; + }; +}; + +&ppmu_dmc1 { + status = "okay"; + + events { + ppmu_dmc1_3: ppmu-event3-dmc1 { + event-name = "ppmu-event3-dmc1"; + }; + }; +}; + +&ppmu_leftbus { + status = "okay"; + + events { + ppmu_leftbus_3: ppmu-event3-leftbus { + event-name = "ppmu-event3-leftbus"; + }; + }; +}; + +&ppmu_rightbus { + status = "okay"; + + events { + ppmu_rightbus_3: ppmu-event3-rightbus { + event-name = "ppmu-event3-rightbus"; + }; + }; +}; + &xusbxti { clock-frequency = <24000000>; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 22465494b796..ac6b0ae42caf 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -18,6 +18,7 @@ */ #include "skeleton.dtsi" +#include "exynos4-cpu-thermal.dtsi" #include <dt-bindings/clock/exynos3250.h> / { @@ -141,26 +142,31 @@ pd_cam: cam-power-domain@10023C00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C00 0x20>; + #power-domain-cells = <0>; }; pd_mfc: mfc-power-domain@10023C40 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C40 0x20>; + #power-domain-cells = <0>; }; pd_g3d: g3d-power-domain@10023C60 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C60 0x20>; + #power-domain-cells = <0>; }; pd_lcd0: lcd0-power-domain@10023C80 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C80 0x20>; + #power-domain-cells = <0>; }; pd_isp: isp-power-domain@10023CA0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; + #power-domain-cells = <0>; }; cmu: clock-controller@10030000 { @@ -188,6 +194,7 @@ interrupts = <0 216 0>; clocks = <&cmu CLK_TMU_APBIF>; clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" status = "disabled"; }; @@ -235,7 +242,7 @@ interrupts = <0 84 0>, <0 85 0>, <0 86 0>; clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>; clock-names = "sclk_fimd", "fimd"; - samsung,power-domain = <&pd_lcd0>; + power-domains = <&pd_lcd0>; samsung,sysreg = <&sys_reg>; status = "disabled"; }; @@ -245,7 +252,7 @@ reg = <0x11C80000 0x10000>; interrupts = <0 83 0>; samsung,phy-type = <0>; - samsung,power-domain = <&pd_lcd0>; + power-domains = <&pd_lcd0>; phys = <&mipi_phy 1>; phy-names = "dsim"; clocks = <&cmu CLK_DSIM0>, <&cmu CLK_SCLK_MIPI0>; @@ -255,6 +262,17 @@ status = "disabled"; }; + hsotg: hsotg@12480000 { + compatible = "snps,dwc2"; + reg = <0x12480000 0x20000>; + interrupts = <0 141 0>; + clocks = <&cmu CLK_USBOTG>; + clock-names = "otg"; + phys = <&exynos_usbphy 0>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + mshc_0: mshc@12510000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12510000 0x1000>; @@ -279,6 +297,16 @@ status = "disabled"; }; + exynos_usbphy: exynos-usbphy@125B0000 { + compatible = "samsung,exynos3250-usb2-phy"; + reg = <0x125B0000 0x100>; + samsung,pmureg-phandle = <&pmu_system_controller>; + clocks = <&cmu CLK_USBOTG>, <&cmu CLK_SCLK_UPLL>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + status = "disabled"; + }; + amba { compatible = "arm,amba-bus"; #address-cells = <1>; @@ -327,7 +355,7 @@ interrupts = <0 102 0>; clock-names = "mfc", "sclk_mfc"; clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>; - samsung,power-domain = <&pd_mfc>; + power-domains = <&pd_mfc>; status = "disabled"; }; @@ -515,6 +543,80 @@ compatible = "arm,cortex-a7-pmu"; interrupts = <0 18 0>, <0 19 0>; }; + + ppmu_dmc0: ppmu_dmc0@106a0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x106a0000 0x2000>; + status = "disabled"; + }; + + ppmu_dmc1: ppmu_dmc1@106b0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x106b0000 0x2000>; + status = "disabled"; + }; + + ppmu_cpu: ppmu_cpu@106c0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x106c0000 0x2000>; + status = "disabled"; + }; + + ppmu_rightbus: ppmu_rightbus@112a0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x112a0000 0x2000>; + clocks = <&cmu CLK_PPMURIGHT>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_leftbus: ppmu_leftbus0@116a0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x116a0000 0x2000>; + clocks = <&cmu CLK_PPMULEFT>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_camif: ppmu_camif@11ac0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x11ac0000 0x2000>; + clocks = <&cmu CLK_PPMUCAMIF>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_lcd0: ppmu_lcd0@11e40000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x11e40000 0x2000>; + clocks = <&cmu CLK_PPMULCD0>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_fsys: ppmu_fsys@12630000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x12630000 0x2000>; + clocks = <&cmu CLK_PPMUFILE>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_g3d: ppmu_g3d@13220000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x13220000 0x2000>; + clocks = <&cmu CLK_PPMUG3D>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_mfc: ppmu_mfc@13660000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x13660000 0x2000>; + clocks = <&cmu CLK_PPMUMFC_L>; + clock-names = "ppmu"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi new file mode 100644 index 000000000000..735cb2f10817 --- /dev/null +++ b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi @@ -0,0 +1,52 @@ +/* + * Device tree sources for Exynos4 thermal zone + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <dt-bindings/thermal/thermal.h> + +/ { +thermal-zones { + cpu_thermal: cpu-thermal { + thermal-sensors = <&tmu 0>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + cpu_alert0: cpu-alert-0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu_alert1: cpu-alert-1 { + temperature = <95000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu_alert2: cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu_alert0>; + }; + map1 { + trip = <&cpu_alert1>; + }; + }; + }; +}; +}; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 24ff27049ce0..77ea547768f4 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -38,6 +38,7 @@ i2c5 = &i2c_5; i2c6 = &i2c_6; i2c7 = &i2c_7; + i2c8 = &i2c_8; csis0 = &csis_0; csis1 = &csis_1; fimc0 = &fimc_0; @@ -61,9 +62,12 @@ reg = <0x03830000 0x100>; clocks = <&clock_audss EXYNOS_I2S_BUS>; clock-names = "iis"; + #clock-cells = <1>; + clock-output-names = "i2s_cdclk0"; dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>; dma-names = "tx", "rx", "tx-sec"; samsung,idma-addr = <0x03000000>; + #sound-dai-cells = <1>; status = "disabled"; }; @@ -76,41 +80,50 @@ compatible = "samsung,s5pv210-mipi-video-phy"; reg = <0x10020710 8>; #phy-cells = <1>; + syscon = <&pmu_system_controller>; }; pd_mfc: mfc-power-domain@10023C40 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C40 0x20>; + #power-domain-cells = <0>; }; pd_g3d: g3d-power-domain@10023C60 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C60 0x20>; + #power-domain-cells = <0>; }; pd_lcd0: lcd0-power-domain@10023C80 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C80 0x20>; + #power-domain-cells = <0>; }; pd_tv: tv-power-domain@10023C20 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C20 0x20>; + #power-domain-cells = <0>; + power-domains = <&pd_lcd0>; }; pd_cam: cam-power-domain@10023C00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C00 0x20>; + #power-domain-cells = <0>; }; pd_gps: gps-power-domain@10023CE0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CE0 0x20>; + #power-domain-cells = <0>; }; pd_gps_alive: gps-alive-power-domain@10023D00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023D00 0x20>; + #power-domain-cells = <0>; }; gic: interrupt-controller@10490000 { @@ -147,7 +160,7 @@ compatible = "samsung,exynos4210-mipi-dsi"; reg = <0x11C80000 0x10000>; interrupts = <0 79 0>; - samsung,power-domain = <&pd_lcd0>; + power-domains = <&pd_lcd0>; phys = <&mipi_phy 1>; phy-names = "dsim"; clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>; @@ -172,7 +185,7 @@ interrupts = <0 84 0>; clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>; clock-names = "fimc", "sclk_fimc"; - samsung,power-domain = <&pd_cam>; + power-domains = <&pd_cam>; samsung,sysreg = <&sys_reg>; status = "disabled"; }; @@ -183,7 +196,7 @@ interrupts = <0 85 0>; clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>; clock-names = "fimc", "sclk_fimc"; - samsung,power-domain = <&pd_cam>; + power-domains = <&pd_cam>; samsung,sysreg = <&sys_reg>; status = "disabled"; }; @@ -194,7 +207,7 @@ interrupts = <0 86 0>; clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>; clock-names = "fimc", "sclk_fimc"; - samsung,power-domain = <&pd_cam>; + power-domains = <&pd_cam>; samsung,sysreg = <&sys_reg>; status = "disabled"; }; @@ -205,7 +218,7 @@ interrupts = <0 87 0>; clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>; clock-names = "fimc", "sclk_fimc"; - samsung,power-domain = <&pd_cam>; + power-domains = <&pd_cam>; samsung,sysreg = <&sys_reg>; status = "disabled"; }; @@ -217,7 +230,7 @@ clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>; clock-names = "csis", "sclk_csis"; bus-width = <4>; - samsung,power-domain = <&pd_cam>; + power-domains = <&pd_cam>; phys = <&mipi_phy 0>; phy-names = "csis"; status = "disabled"; @@ -232,7 +245,7 @@ clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>; clock-names = "csis", "sclk_csis"; bus-width = <2>; - samsung,power-domain = <&pd_cam>; + power-domains = <&pd_cam>; phys = <&mipi_phy 2>; phy-names = "csis"; status = "disabled"; @@ -372,8 +385,11 @@ reg = <0x13960000 0x100>; clocks = <&clock CLK_I2S1>; clock-names = "iis"; + #clock-cells = <1>; + clock-output-names = "i2s_cdclk1"; dmas = <&pdma1 12>, <&pdma1 11>; dma-names = "tx", "rx"; + #sound-dai-cells = <1>; status = "disabled"; }; @@ -382,8 +398,11 @@ reg = <0x13970000 0x100>; clocks = <&clock CLK_I2S2>; clock-names = "iis"; + #clock-cells = <1>; + clock-output-names = "i2s_cdclk2"; dmas = <&pdma0 14>, <&pdma0 13>; dma-names = "tx", "rx"; + #sound-dai-cells = <1>; status = "disabled"; }; @@ -391,7 +410,7 @@ compatible = "samsung,mfc-v5"; reg = <0x13400000 0x10000>; interrupts = <0 94 0>; - samsung,power-domain = <&pd_mfc>; + power-domains = <&pd_mfc>; clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>; clock-names = "mfc", "sclk_mfc"; status = "disabled"; @@ -537,6 +556,22 @@ status = "disabled"; }; + i2c_8: i2c@138E0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-hdmiphy-i2c"; + reg = <0x138E0000 0x100>; + interrupts = <0 93 0>; + clocks = <&clock CLK_I2C_HDMI>; + clock-names = "i2c"; + status = "disabled"; + + hdmi_i2c_phy: hdmiphy@38 { + compatible = "exynos4210-hdmiphy"; + reg = <0x38>; + }; + }; + spi_0: spi@13920000 { compatible = "samsung,exynos4210-spi"; reg = <0x13920000 0x100>; @@ -641,8 +676,143 @@ interrupts = <11 0>, <11 1>, <11 2>; clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>; clock-names = "sclk_fimd", "fimd"; - samsung,power-domain = <&pd_lcd0>; + power-domains = <&pd_lcd0>; samsung,sysreg = <&sys_reg>; status = "disabled"; }; + + tmu: tmu@100C0000 { + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + hdmi: hdmi@12D00000 { + compatible = "samsung,exynos4210-hdmi"; + reg = <0x12D00000 0x70000>; + interrupts = <0 92 0>; + clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", + "mout_hdmi"; + clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, + <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, + <&clock CLK_MOUT_HDMI>; + phy = <&hdmi_i2c_phy>; + power-domains = <&pd_tv>; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; + }; + + mixer: mixer@12C10000 { + compatible = "samsung,exynos4210-mixer"; + interrupts = <0 91 0>; + reg = <0x12C10000 0x2100>, <0x12c00000 0x300>; + power-domains = <&pd_tv>; + status = "disabled"; + }; + + ppmu_dmc0: ppmu_dmc0@106a0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x106a0000 0x2000>; + clocks = <&clock CLK_PPMUDMC0>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_dmc1: ppmu_dmc1@106b0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x106b0000 0x2000>; + clocks = <&clock CLK_PPMUDMC1>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_cpu: ppmu_cpu@106c0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x106c0000 0x2000>; + clocks = <&clock CLK_PPMUCPU>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_acp: ppmu_acp@10ae0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x106e0000 0x2000>; + status = "disabled"; + }; + + ppmu_rightbus: ppmu_rightbus@112a0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x112a0000 0x2000>; + clocks = <&clock CLK_PPMURIGHT>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_leftbus: ppmu_leftbus0@116a0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x116a0000 0x2000>; + clocks = <&clock CLK_PPMULEFT>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_camif: ppmu_camif@11ac0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x11ac0000 0x2000>; + clocks = <&clock CLK_PPMUCAMIF>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_lcd0: ppmu_lcd0@11e40000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x11e40000 0x2000>; + clocks = <&clock CLK_PPMULCD0>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_fsys: ppmu_g3d@12630000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x12630000 0x2000>; + status = "disabled"; + }; + + ppmu_image: ppmu_image@12aa0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x12aa0000 0x2000>; + clocks = <&clock CLK_PPMUIMAGE>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_tv: ppmu_tv@12e40000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x12e40000 0x2000>; + clocks = <&clock CLK_PPMUTV>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_g3d: ppmu_g3d@13220000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x13220000 0x2000>; + clocks = <&clock CLK_PPMUG3D>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_mfc_left: ppmu_mfc_left@13660000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x13660000 0x2000>; + clocks = <&clock CLK_PPMUMFC_L>; + clock-names = "ppmu"; + status = "disabled"; + }; + + ppmu_mfc_right: ppmu_mfc_right@13670000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x13670000 0x2000>; + clocks = <&clock CLK_PPMUMFC_R>; + clock-names = "ppmu"; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index f767c425d0b5..b81146141402 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -31,6 +31,7 @@ chosen { bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; + stdout-path = &serial_2; }; regulators { diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 676e6e0c8cf3..86216fff1b4f 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -27,6 +27,7 @@ chosen { bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; + stdout-path = &serial_1; }; sdhci@12530000 { diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 720836205546..32c5fd8f6269 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -28,6 +28,7 @@ chosen { bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; + stdout-path = &serial_2; }; regulators { @@ -91,6 +92,7 @@ hsotg@12480000 { vusb_d-supply = <&vusb_reg>; vusb_a-supply = <&vusbdac_reg>; + dr_mode = "peripheral"; status = "okay"; }; @@ -424,6 +426,25 @@ status = "okay"; }; + tmu@100C0000 { + status = "okay"; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 2 2>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 4 4>; + }; + }; + }; + }; + camera { pinctrl-names = "default"; pinctrl-0 = <>; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index aaf0cae4f5e8..d4f2b11319dd 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -26,6 +26,7 @@ chosen { bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; + stdout-path = &serial_2; }; sysram@02020000 { @@ -71,6 +72,7 @@ hsotg@12480000 { vusb_d-supply = <&ldo3_reg>; vusb_a-supply = <&ldo8_reg>; + dr_mode = "peripheral"; status = "okay"; }; @@ -503,6 +505,63 @@ assigned-clock-rates = <0>, <160000000>; }; }; + + hdmi_en: voltage-regulator-hdmi-5v { + compatible = "regulator-fixed"; + regulator-name = "HDMI_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpe0 1 0>; + enable-active-high; + }; + + hdmi_ddc: i2c-ddc { + compatible = "i2c-gpio"; + gpios = <&gpe4 2 0 &gpe4 3 0>; + i2c-gpio,delay-us = <100>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&i2c_ddc_bus>; + pinctrl-names = "default"; + status = "okay"; + }; + + mixer@12C10000 { + status = "okay"; + }; + + hdmi@12D00000 { + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; + hdmi-en-supply = <&hdmi_en>; + vdd-supply = <&ldo3_reg>; + vdd_osc-supply = <&ldo4_reg>; + vdd_pll-supply = <&ldo3_reg>; + ddc = <&hdmi_ddc>; + status = "okay"; + }; + + i2c@138E0000 { + status = "okay"; + }; +}; + +&pinctrl_1 { + hdmi_hpd: hdmi-hpd { + samsung,pins = "gpx3-7"; + samsung,pin-pud = <0>; + }; +}; + +&pinctrl_0 { + i2c_ddc_bus: i2c-ddc-bus { + samsung,pins = "gpe4-2", "gpe4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; }; &mdma1 { diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index bcc9e63c8070..be89f83f70e7 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -21,6 +21,7 @@ #include "exynos4.dtsi" #include "exynos4210-pinctrl.dtsi" +#include "exynos4-cpu-thermal.dtsi" / { compatible = "samsung,exynos4210", "samsung,exynos4"; @@ -35,10 +36,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@900 { + cpu0: cpu@900 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0x900>; + cooling-min-level = <4>; + cooling-max-level = <2>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@901 { @@ -79,6 +83,16 @@ pd_lcd1: lcd1-power-domain@10023CA0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; + #power-domain-cells = <0>; + }; + + l2c: l2-cache-controller@10502000 { + compatible = "arm,pl310-cache"; + reg = <0x10502000 0x1000>; + cache-unified; + cache-level = <2>; + arm,tag-latency = <2 2 1>; + arm,data-latency = <2 2 1>; }; gic: interrupt-controller@10490000 { @@ -143,16 +157,38 @@ reg = <0x03860000 0x1000>; }; - tmu@100C0000 { + tmu: tmu@100C0000 { compatible = "samsung,exynos4210-tmu"; interrupt-parent = <&combiner>; reg = <0x100C0000 0x100>; interrupts = <2 4>; clocks = <&clock CLK_TMU_APBIF>; clock-names = "tmu_apbif"; + samsung,tmu_gain = <15>; + samsung,tmu_reference_voltage = <7>; status = "disabled"; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert0: cpu-alert-0 { + temperature = <85000>; /* millicelsius */ + }; + cpu_alert1: cpu-alert-1 { + temperature = <100000>; /* millicelsius */ + }; + cpu_alert2: cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + }; + }; + }; + }; + g2d@12800000 { compatible = "samsung,s5pv210-g2d"; reg = <0x12800000 0x1000>; @@ -192,4 +228,20 @@ samsung,lcd-wb; }; }; + + mixer: mixer@12C10000 { + clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer", + "sclk_mixer"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>, + <&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>; + }; + + ppmu_lcd1: ppmu_lcd1@12240000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x12240000 0x2000>; + clocks = <&clock CLK_PPMULCD1>; + clock-names = "ppmu"; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index dd0a43ec56da..5be03288f1ee 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -26,10 +26,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@A00 { + cpu0: cpu@A00 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA00>; + cooling-min-level = <13>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@A01 { diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 3fbf588682b9..adb4f6a97a1d 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -7,10 +7,15 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/sound/samsung-i2s.h> #include <dt-bindings/input/input.h> #include "exynos4412.dtsi" / { + chosen { + stdout-path = &serial_1; + }; + firmware@0204F000 { compatible = "samsung,secure-firmware"; reg = <0x0204F000 0x1000>; @@ -37,14 +42,13 @@ pinctrl-names = "default"; status = "okay"; clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>; - clock-names = "iis", "i2s_opclk0"; + <&clock_audss EXYNOS_DOUT_AUD_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; }; sound: sound { - compatible = "samsung,odroidx2-audio"; - samsung,i2s-controller = <&i2s0>; - samsung,audio-codec = <&max98090>; + compatible = "simple-audio-card"; assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, <&clock_audss EXYNOS_MOUT_I2S>, <&clock_audss EXYNOS_DOUT_SRP>, @@ -55,6 +59,20 @@ <0>, <192000000>, <19200000>; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&link0_codec>; + simple-audio-card,frame-master = <&link0_codec>; + + simple-audio-card,cpu { + sound-dai = <&i2s0 0>; + system-clock-frequency = <19200000>; + }; + + link0_codec: simple-audio-card,codec { + sound-dai = <&max98090>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + }; }; mmc@12550000 { @@ -231,6 +249,20 @@ regulator-always-on; }; + ldo8_reg: ldo@8 { + regulator-compatible = "LDO8"; + regulator-name = "VDD10_HDMI_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo10_reg: ldo@10 { + regulator-compatible = "LDO10"; + regulator-name = "VDDQ_MIPIHSI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo11_reg: LDO11 { regulator-name = "VDD18_ABB1_1.8V"; regulator-min-microvolt = <1800000>; @@ -373,6 +405,9 @@ reg = <0x10>; interrupt-parent = <&gpx0>; interrupts = <0 0>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + clock-names = "mclk"; + #sound-dai-cells = <0>; }; }; @@ -381,6 +416,7 @@ }; hsotg@12480000 { + dr_mode = "peripheral"; status = "okay"; vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>; @@ -389,6 +425,51 @@ ehci: ehci@12580000 { status = "okay"; }; + + tmu@100C0000 { + vtmu-supply = <&ldo10_reg>; + status = "okay"; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>; + }; + }; + }; + }; + + mixer: mixer@12C10000 { + status = "okay"; + }; + + hdmi@12D00000 { + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; + ddc = <&hdmi_ddc>; + status = "okay"; + }; + + hdmi_ddc: i2c@13880000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; + }; + + i2c@138E0000 { + status = "okay"; + }; }; &pinctrl_1 { @@ -403,4 +484,9 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + hdmi_hpd: hdmi-hpd { + samsung,pins = "gpx3-7"; + samsung,pin-pud = <1>; + }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index c8a64be55d07..44684e57ead1 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -49,9 +49,11 @@ }; &sound { - compatible = "samsung,odroidu3-audio"; - samsung,model = "Odroid-U3"; - samsung,audio-routing = + simple-audio-card,name = "Odroid-U3"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Speakers", "Speakers"; + simple-audio-card,routing = "Headphone Jack", "HPL", "Headphone Jack", "HPR", "Headphone Jack", "MICBIAS", diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts index 96b43f4497cc..6e33678562ae 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx2.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts @@ -23,8 +23,12 @@ }; &sound { - samsung,model = "Odroid-X2"; - samsung,audio-routing = + simple-audio-card,name = "Odroid-X2"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Microphone", "Mic Jack", + "Microphone", "DMIC"; + simple-audio-card,routing = "Headphone Jack", "HPL", "Headphone Jack", "HPR", "IN1", "Mic Jack", diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index de15114fd07c..bd8b73077d41 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -26,6 +26,7 @@ chosen { bootargs ="console=ttySAC2,115200"; + stdout-path = &serial_2; }; firmware@0203F000 { diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index ded0b70f7644..b9256afbcc68 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -25,6 +25,7 @@ chosen { bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; + stdout-path = &serial_1; }; g2d@10800000 { diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts index ea6929d9c621..d46fd4c2aeaa 100644 --- a/arch/arm/boot/dts/exynos4412-tiny4412.dts +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts @@ -18,6 +18,10 @@ model = "FriendlyARM TINY4412 board based on Exynos4412"; compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4"; + chosen { + stdout-path = &serial_0; + }; + memory { reg = <0x40000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi new file mode 100644 index 000000000000..e3f7934d19d0 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi @@ -0,0 +1,24 @@ +/* + * Device tree sources for Exynos4412 TMU sensor configuration + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <dt-bindings/thermal/thermal_exynos.h> + +#thermal-sensor-cells = <0>; +samsung,tmu_gain = <8>; +samsung,tmu_reference_voltage = <16>; +samsung,tmu_noise_cancel_mode = <4>; +samsung,tmu_efuse_value = <55>; +samsung,tmu_min_efuse_value = <40>; +samsung,tmu_max_efuse_value = <100>; +samsung,tmu_first_point_trim = <25>; +samsung,tmu_second_point_trim = <85>; +samsung,tmu_default_temp_offset = <50>; +samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 29231b452643..173ffa479ad3 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -15,6 +15,7 @@ /dts-v1/; #include "exynos4412.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Samsung Trats 2 based on Exynos4412"; @@ -24,6 +25,7 @@ i2c9 = &i2c_ak8975; i2c10 = &i2c_cm36651; i2c11 = &i2c_max77693; + i2c12 = &i2c_max77693_fuel; }; memory { @@ -32,6 +34,7 @@ chosen { bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; + stdout-path = &serial_2; }; firmware@0204F000 { @@ -56,15 +59,6 @@ #address-cells = <1>; #size-cells = <0>; - vemmc_reg: regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpk0 2 0>; - enable-active-high; - }; - cam_io_reg: voltage-regulator-1 { compatible = "regulator-fixed"; regulator-name = "CAM_SENSOR_A"; @@ -92,16 +86,6 @@ enable-active-high; }; - cam_isp_core_reg: voltage-regulator-4 { - compatible = "regulator-fixed"; - regulator-name = "CAM_ISP_CORE_1.2V_EN"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - gpio = <&gpm0 3 0>; - enable-active-high; - regulator-always-on; - }; - ps_als_reg: voltage-regulator-5 { compatible = "regulator-fixed"; regulator-name = "LED_A_3.0V"; @@ -203,6 +187,25 @@ }; }; + i2c@138A0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c4_bus>; + pinctrl-names = "default"; + status = "okay"; + + wm1811: wm1811@1a { + compatible = "wlf,wm1811"; + reg = <0x1a>; + clocks = <&pmu_system_controller 0>; + clock-names = "MCLK1"; + DCVDD-supply = <&ldo3_reg>; + DBVDD1-supply = <&ldo3_reg>; + wlf,ldo1ena = <&gpj0 4 0>; + }; + }; + i2c@138D0000 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; @@ -225,7 +228,6 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; - regulator-mem-on; }; ldo2_reg: ldo2 { @@ -234,7 +236,9 @@ regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; - regulator-mem-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo3_reg: ldo3 { @@ -243,7 +247,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; - regulator-mem-on; }; ldo4_reg: ldo4 { @@ -252,7 +255,6 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; - regulator-mem-on; }; ldo5_reg: ldo5 { @@ -261,7 +263,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; - regulator-mem-on; }; ldo6_reg: ldo6 { @@ -270,7 +271,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; - regulator-mem-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo7_reg: ldo7 { @@ -279,7 +282,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; - regulator-mem-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo8_reg: ldo8 { @@ -287,7 +292,9 @@ regulator-name = "VMIPI_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; - regulator-mem-off; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo9_reg: ldo9 { @@ -295,7 +302,6 @@ regulator-name = "CAM_ISP_MIPI_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - regulator-mem-idle; }; ldo10_reg: ldo10 { @@ -303,7 +309,9 @@ regulator-name = "VMIPI_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-mem-off; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo11_reg: ldo11 { @@ -312,7 +320,9 @@ regulator-min-microvolt = <1950000>; regulator-max-microvolt = <1950000>; regulator-always-on; - regulator-mem-off; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo12_reg: ldo12 { @@ -320,7 +330,9 @@ regulator-name = "VUOTG_3.0V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - regulator-mem-off; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo13_reg: ldo13 { @@ -328,7 +340,6 @@ regulator-name = "NFC_AVDD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-mem-idle; }; ldo14_reg: ldo14 { @@ -337,7 +348,9 @@ regulator-min-microvolt = <1950000>; regulator-max-microvolt = <1950000>; regulator-always-on; - regulator-mem-off; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo15_reg: ldo15 { @@ -345,7 +358,9 @@ regulator-name = "VHSIC_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; - regulator-mem-off; + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo16_reg: ldo16 { @@ -353,7 +368,9 @@ regulator-name = "VHSIC_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-mem-off; + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo17_reg: ldo17 { @@ -361,7 +378,6 @@ regulator-name = "CAM_SENSOR_CORE_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - regulator-mem-idle; }; ldo18_reg: ldo18 { @@ -369,7 +385,6 @@ regulator-name = "CAM_ISP_SEN_IO_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-mem-idle; }; ldo19_reg: ldo19 { @@ -377,7 +392,6 @@ regulator-name = "VT_CAM_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-mem-idle; }; ldo20_reg: ldo20 { @@ -385,7 +399,6 @@ regulator-name = "VDDQ_PRE_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-mem-idle; }; ldo21_reg: ldo21 { @@ -393,7 +406,7 @@ regulator-name = "VTF_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-mem-idle; + maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; }; ldo22_reg: ldo22 { @@ -401,6 +414,7 @@ regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; ldo23_reg: ldo23 { @@ -408,7 +422,6 @@ regulator-name = "TSP_AVDD_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-mem-idle; }; ldo24_reg: ldo24 { @@ -416,7 +429,6 @@ regulator-name = "TSP_VDD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-mem-idle; }; ldo25_reg: ldo25 { @@ -424,7 +436,6 @@ regulator-name = "LCD_VCC_3.3V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-mem-idle; }; ldo26_reg: ldo26 { @@ -432,7 +443,6 @@ regulator-name = "MOTOR_VCC_3.0V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - regulator-mem-idle; }; buck1_reg: buck1 { @@ -442,7 +452,9 @@ regulator-max-microvolt = <1100000>; regulator-always-on; regulator-boot-on; - regulator-mem-off; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck2_reg: buck2 { @@ -452,7 +464,9 @@ regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; - regulator-mem-off; + regulator-state-mem { + regulator-on-in-suspend; + }; }; buck3_reg: buck3 { @@ -462,7 +476,9 @@ regulator-max-microvolt = <1150000>; regulator-always-on; regulator-boot-on; - regulator-mem-off; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck4_reg: buck4 { @@ -471,7 +487,9 @@ regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; regulator-boot-on; - regulator-mem-off; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck5_reg: buck5 { @@ -503,6 +521,7 @@ regulator-name = "VMEM_VDDF_3.0V"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; + maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; buck9_reg: buck9 { @@ -510,7 +529,7 @@ regulator-name = "CAM_ISP_CORE_1.2V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1200000>; - regulator-mem-off; + maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; }; }; }; @@ -549,6 +568,32 @@ haptic-supply = <&ldo26_reg>; pwms = <&pwm 0 38022 0>; }; + + charger { + compatible = "maxim,max77693-charger"; + + maxim,constant-microvolt = <4350000>; + maxim,min-system-microvolt = <3600000>; + maxim,thermal-regulation-celsius = <100>; + maxim,battery-overcurrent-microamp = <3500000>; + maxim,charge-input-threshold-microvolt = <4300000>; + }; + }; + }; + + i2c_max77693_fuel: i2c-gpio-3 { + compatible = "i2c-gpio"; + gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + max77693-fuel-gauge@36 { + compatible = "maxim,max17047"; + interrupt-parent = <&gpx2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + reg = <0x36>; }; }; @@ -557,7 +602,7 @@ broken-cd; non-removable; card-detect-delay = <200>; - vmmc-supply = <&vemmc_reg>; + vmmc-supply = <&ldo22_reg>; clock-frequency = <400000000>; samsung,dw-mshc-ciu-div = <0>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -721,8 +766,8 @@ status = "okay"; assigned-clocks = <&clock CLK_MOUT_CAM0>, <&clock CLK_MOUT_CAM1>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>, - <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-parents = <&clock CLK_XUSBXTI>, + <&clock CLK_XUSBXTI>; fimc_0: fimc@11800000 { status = "okay"; @@ -838,6 +883,24 @@ }; }; + i2s0: i2s@03830000 { + pinctrl-0 = <&i2s0_bus>; + pinctrl-names = "default"; + status = "okay"; + }; + + sound { + compatible = "samsung,trats2-audio"; + samsung,i2s-controller = <&i2s0>; + samsung,model = "Trats2"; + samsung,audio-codec = <&wm1811>; + samsung,audio-routing = + "SPK", "SPKOUTLN", + "SPK", "SPKOUTLP", + "SPK", "SPKOUTRN", + "SPK", "SPKOUTRP"; + }; + exynos-usbphy@125B0000 { status = "okay"; }; @@ -845,6 +908,7 @@ hsotg@12480000 { vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>; + dr_mode = "peripheral"; status = "okay"; }; @@ -863,6 +927,66 @@ pulldown-ohm = <100000>; /* 100K */ io-channels = <&adc 2>; /* Battery temperature */ }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>; + }; + }; + }; + }; +}; + +&pmu_system_controller { + assigned-clocks = <&pmu_system_controller 0>; + assigned-clock-parents = <&clock CLK_XUSBXTI>; +}; + +&ppmu_dmc0 { + status = "okay"; + + events { + ppmu_dmc0_3: ppmu-event3-dmc0 { + event-name = "ppmu-event3-dmc0"; + }; + }; +}; + +&ppmu_dmc1 { + status = "okay"; + + events { + ppmu_dmc1_3: ppmu-event3-dmc1 { + event-name = "ppmu-event3-dmc1"; + }; + }; +}; + +&ppmu_leftbus { + status = "okay"; + + events { + ppmu_leftbus_3: ppmu-event3-leftbus { + event-name = "ppmu-event3-leftbus"; + }; + }; +}; + +&ppmu_rightbus { + status = "okay"; + + events { + ppmu_rightbus_3: ppmu-event3-rightbus { + event-name = "ppmu-event3-rightbus"; + }; + }; }; &pinctrl_0 { diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 0f6ec93bb1d8..68ad43b391ae 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -26,10 +26,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@A00 { + cpu0: cpu@A00 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA00>; + cooling-min-level = <13>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@A01 { diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi index c1c9b37340d9..5caea996e090 100644 --- a/arch/arm/boot/dts/exynos4415.dtsi +++ b/arch/arm/boot/dts/exynos4415.dtsi @@ -131,36 +131,43 @@ pd_cam: cam-power-domain@10024000 { compatible = "samsung,exynos4210-pd"; reg = <0x10024000 0x20>; + #power-domain-cells = <0>; }; pd_tv: tv-power-domain@10024020 { compatible = "samsung,exynos4210-pd"; reg = <0x10024020 0x20>; + #power-domain-cells = <0>; }; pd_mfc: mfc-power-domain@10024040 { compatible = "samsung,exynos4210-pd"; reg = <0x10024040 0x20>; + #power-domain-cells = <0>; }; pd_g3d: g3d-power-domain@10024060 { compatible = "samsung,exynos4210-pd"; reg = <0x10024060 0x20>; + #power-domain-cells = <0>; }; pd_lcd0: lcd0-power-domain@10024080 { compatible = "samsung,exynos4210-pd"; reg = <0x10024080 0x20>; + #power-domain-cells = <0>; }; pd_isp0: isp0-power-domain@100240A0 { compatible = "samsung,exynos4210-pd"; reg = <0x100240A0 0x20>; + #power-domain-cells = <0>; }; pd_isp1: isp1-power-domain@100240E0 { compatible = "samsung,exynos4210-pd"; reg = <0x100240E0 0x20>; + #power-domain-cells = <0>; }; cmu: clock-controller@10030000 { @@ -234,6 +241,33 @@ interrupts = <0 240 0>; }; + fimd: fimd@11C00000 { + compatible = "samsung,exynos4415-fimd"; + reg = <0x11C00000 0x30000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <0 84 0>, <0 85 0>, <0 86 0>; + clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>; + clock-names = "sclk_fimd", "fimd"; + samsung,power-domain = <&pd_lcd0>; + samsung,sysreg = <&sysreg_system_controller>; + status = "disabled"; + }; + + dsi_0: dsi@11C80000 { + compatible = "samsung,exynos4415-mipi-dsi"; + reg = <0x11C80000 0x10000>; + interrupts = <0 83 0>; + samsung,phy-type = <0>; + samsung,power-domain = <&pd_lcd0>; + phys = <&mipi_phy 1>; + phy-names = "dsim"; + clocks = <&cmu CLK_DSIM0>, <&cmu CLK_SCLK_MIPI0>; + clock-names = "bus_clk", "pll_clk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + hsotg: hsotg@12480000 { compatible = "samsung,s3c6400-hsotg"; reg = <0x12480000 0x20000>; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 93b70402e943..6a6abe14fd9b 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -19,6 +19,7 @@ #include "exynos4.dtsi" #include "exynos4x12-pinctrl.dtsi" +#include "exynos4-cpu-thermal.dtsi" / { aliases { @@ -52,6 +53,21 @@ pd_isp: isp-power-domain@10023CA0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; + #power-domain-cells = <0>; + }; + + l2c: l2-cache-controller@10502000 { + compatible = "arm,pl310-cache"; + reg = <0x10502000 0x1000>; + cache-unified; + cache-level = <2>; + arm,tag-latency = <2 2 1>; + arm,data-latency = <3 2 1>; + arm,double-linefill = <1>; + arm,double-linefill-incr = <0>; + arm,double-linefill-wrap = <1>; + arm,prefetch-drop = <1>; + arm,prefetch-offset = <7>; }; clock: clock-controller@10030000 { @@ -195,7 +211,7 @@ compatible = "samsung,exynos4212-fimc-lite"; reg = <0x12390000 0x1000>; interrupts = <0 105 0>; - samsung,power-domain = <&pd_isp>; + power-domains = <&pd_isp>; clocks = <&clock CLK_FIMC_LITE0>; clock-names = "flite"; status = "disabled"; @@ -205,7 +221,7 @@ compatible = "samsung,exynos4212-fimc-lite"; reg = <0x123A0000 0x1000>; interrupts = <0 106 0>; - samsung,power-domain = <&pd_isp>; + power-domains = <&pd_isp>; clocks = <&clock CLK_FIMC_LITE1>; clock-names = "flite"; status = "disabled"; @@ -215,7 +231,7 @@ compatible = "samsung,exynos4212-fimc-is", "simple-bus"; reg = <0x12000000 0x260000>; interrupts = <0 90 0>, <0 95 0>; - samsung,power-domain = <&pd_isp>; + power-domains = <&pd_isp>; clocks = <&clock CLK_FIMC_LITE0>, <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>, <&clock CLK_PPMUISPMX>, @@ -225,7 +241,7 @@ <&clock CLK_DIV_ISP0>,<&clock CLK_DIV_ISP1>, <&clock CLK_DIV_MCUISP0>, <&clock CLK_DIV_MCUISP1>, - <&clock CLK_SCLK_UART_ISP>, + <&clock CLK_UART_ISP_SCLK>, <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>, <&clock CLK_ACLK400_MCUISP>, <&clock CLK_DIV_ACLK400_MCUISP>; @@ -282,4 +298,15 @@ clock-names = "tmu_apbif"; status = "disabled"; }; + + hdmi: hdmi@12D00000 { + compatible = "samsung,exynos4212-hdmi"; + }; + + mixer: mixer@12C10000 { + compatible = "samsung,exynos4212-mixer"; + clock-names = "mixer", "hdmi", "sclk_hdmi", "vp"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index effaf2af41bc..b9aeec430527 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -33,6 +33,8 @@ gpio-keys { compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&power_key_irq &lid_irq>; power { label = "Power"; @@ -540,6 +542,13 @@ }; &pinctrl_0 { + power_key_irq: power-key-irq { + samsung,pins = "gpx1-3"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + ec_irq: ec-irq { samsung,pins = "gpx1-6"; samsung,pin-function = <0>; @@ -575,6 +584,13 @@ samsung,pin-drv = <0>; }; + lid_irq: lid-irq { + samsung,pins = "gpx3-5"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + hdmi_hpd_irq: hdmi-hpd-irq { samsung,pins = "gpx3-7"; samsung,pin-function = <0>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index d75c89d7666a..adbde1adad95 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -20,7 +20,7 @@ #include <dt-bindings/clock/exynos5250.h> #include "exynos5.dtsi" #include "exynos5250-pinctrl.dtsi" - +#include "exynos4-cpu-thermal.dtsi" #include <dt-bindings/clock/exynos-audss-clk.h> / { @@ -58,11 +58,14 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1700000000>; + cooling-min-level = <15>; + cooling-max-level = <9>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@1 { device_type = "cpu"; @@ -93,11 +96,19 @@ pd_gsc: gsc-power-domain@10044000 { compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; + #power-domain-cells = <0>; }; pd_mfc: mfc-power-domain@10044040 { compatible = "samsung,exynos4210-pd"; reg = <0x10044040 0x20>; + #power-domain-cells = <0>; + }; + + pd_disp1: disp1-power-domain@100440A0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x100440A0 0x20>; + #power-domain-cells = <0>; }; clock: clock-controller@10010000 { @@ -222,7 +233,7 @@ compatible = "samsung,mfc-v6"; reg = <0x11000000 0x10000>; interrupts = <0 96 0>; - samsung,power-domain = <&pd_mfc>; + power-domains = <&pd_mfc>; clocks = <&clock CLK_MFC>; clock-names = "mfc"; }; @@ -233,12 +244,32 @@ status = "disabled"; }; - tmu@10060000 { + tmu: tmu@10060000 { compatible = "samsung,exynos5250-tmu"; reg = <0x10060000 0x100>; interrupts = <0 65 0>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tmu 0>; + + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 9 9>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 15 15>; + }; + }; + }; }; serial@12C00000 { @@ -682,7 +713,7 @@ compatible = "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; interrupts = <0 85 0>; - samsung,power-domain = <&pd_gsc>; + power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL0>; clock-names = "gscl"; }; @@ -691,7 +722,7 @@ compatible = "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; interrupts = <0 86 0>; - samsung,power-domain = <&pd_gsc>; + power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL1>; clock-names = "gscl"; }; @@ -700,7 +731,7 @@ compatible = "samsung,exynos5-gsc"; reg = <0x13e20000 0x1000>; interrupts = <0 87 0>; - samsung,power-domain = <&pd_gsc>; + power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL2>; clock-names = "gscl"; }; @@ -709,7 +740,7 @@ compatible = "samsung,exynos5-gsc"; reg = <0x13e30000 0x1000>; interrupts = <0 88 0>; - samsung,power-domain = <&pd_gsc>; + power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL3>; clock-names = "gscl"; }; @@ -717,6 +748,7 @@ hdmi: hdmi { compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x70000>; + power-domains = <&pd_disp1>; interrupts = <0 95 0>; clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, @@ -729,9 +761,11 @@ mixer { compatible = "samsung,exynos5250-mixer"; reg = <0x14450000 0x10000>; + power-domains = <&pd_disp1>; interrupts = <0 94 0>; - clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>; - clock-names = "mixer", "sclk_hdmi"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>; + clock-names = "mixer", "hdmi", "sclk_hdmi"; }; dp_phy: video-phy@10040720 { @@ -741,6 +775,7 @@ }; dp: dp-controller@145B0000 { + power-domains = <&pd_disp1>; clocks = <&clock CLK_DP>; clock-names = "dp"; phys = <&dp_phy>; @@ -748,6 +783,7 @@ }; fimd: fimd@14400000 { + power-domains = <&pd_disp1>; clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; }; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 9a050e19a4dc..c47bb70665c1 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -13,6 +13,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/maxim,max77802.h> +#include <dt-bindings/regulator/maxim,max77802.h> #include "exynos5420.dtsi" / { @@ -53,7 +54,7 @@ compatible = "gpio-keys"; pinctrl-names = "default"; - pinctrl-0 = <&power_key_irq>; + pinctrl-0 = <&power_key_irq &lid_irq>; power { label = "Power"; @@ -61,6 +62,15 @@ linux,code = <KEY_POWER>; gpio-key,wakeup; }; + + lid-switch { + label = "Lid"; + gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + debounce-interval = <1>; + gpio-key,wakeup; + }; }; memory { @@ -192,6 +202,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck2_reg: BUCK2 { @@ -201,6 +214,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck3_reg: BUCK3 { @@ -210,6 +226,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck4_reg: BUCK4 { @@ -219,6 +238,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck5_reg: BUCK5 { @@ -227,6 +249,9 @@ regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck6_reg: BUCK6 { @@ -236,6 +261,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck7_reg: BUCK7 { @@ -244,6 +272,9 @@ regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; buck8_reg: BUCK8 { @@ -252,6 +283,9 @@ regulator-max-microvolt = <2850000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck9_reg: BUCK9 { @@ -260,6 +294,9 @@ regulator-max-microvolt = <2000000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; buck10_reg: BUCK10 { @@ -268,6 +305,9 @@ regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo1_reg: LDO1 { @@ -275,6 +315,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo2_reg: LDO2 { @@ -288,6 +332,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; vqmmc_sdcard: ldo4_reg: LDO4 { @@ -295,6 +343,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo5_reg: LDO5 { @@ -302,6 +353,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo6_reg: LDO6 { @@ -309,6 +363,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo7_reg: LDO7 { @@ -322,6 +379,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo9_reg: LDO9 { @@ -329,6 +389,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo10_reg: LDO10 { @@ -336,6 +400,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo11_reg: LDO11 { @@ -343,6 +410,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo12_reg: LDO12 { @@ -350,6 +421,9 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo13_reg: LDO13 { @@ -357,6 +431,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo14_reg: LDO14 { @@ -364,6 +442,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo15_reg: LDO15 { @@ -371,6 +452,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo17_reg: LDO17 { @@ -378,6 +462,9 @@ regulator-min-microvolt = <900000>; regulator-max-microvolt = <1400000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo18_reg: LDO18 { @@ -451,6 +538,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo32_reg: LDO32 { @@ -658,6 +748,13 @@ samsung,pin-drv = <0>; }; + lid_irq: lid-irq { + samsung,pins = "gpx3-4"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + hdmi_hpd_irq: hdmi-hpd-irq { samsung,pins = "gpx3-7"; samsung,pin-function = <0>; @@ -815,6 +912,7 @@ }; tps65090_fet5: fet5 { regulator-name = "camout"; + regulator-always-on; }; tps65090_fet6: fet6 { regulator-name = "lcd_vdd"; diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi b/arch/arm/boot/dts/exynos5420-trip-points.dtsi new file mode 100644 index 000000000000..5d31fc140823 --- /dev/null +++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi @@ -0,0 +1,35 @@ +/* + * Device tree sources for default Exynos5420 thermal zone definition + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +polling-delay-passive = <0>; +polling-delay = <0>; +trips { + cpu-alert-0 { + temperature = <85000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu-alert-1 { + temperature = <103000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu-crit-0 { + temperature = <1200000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; +}; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 6d38f8bfd0e6..c0e98cf3514f 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -178,7 +178,7 @@ interrupts = <0 96 0>; clocks = <&clock CLK_MFC>; clock-names = "mfc"; - samsung,power-domain = <&mfc_pd>; + power-domains = <&mfc_pd>; }; mmc_0: mmc@12200000 { @@ -250,11 +250,13 @@ gsc_pd: power-domain@10044000 { compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; + #power-domain-cells = <0>; }; isp_pd: power-domain@10044020 { compatible = "samsung,exynos4210-pd"; reg = <0x10044020 0x20>; + #power-domain-cells = <0>; }; mfc_pd: power-domain@10044060 { @@ -263,11 +265,27 @@ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>, <&clock CLK_MOUT_USER_ACLK333>; clock-names = "oscclk", "pclk0", "clk0"; + #power-domain-cells = <0>; }; msc_pd: power-domain@10044120 { compatible = "samsung,exynos4210-pd"; reg = <0x10044120 0x20>; + #power-domain-cells = <0>; + }; + + disp_pd: power-domain@100440C0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x100440C0 0x20>; + #power-domain-cells = <0>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK200>, + <&clock CLK_MOUT_USER_ACLK200_DISP1>, + <&clock CLK_MOUT_SW_ACLK300>, + <&clock CLK_MOUT_USER_ACLK300_DISP1>, + <&clock CLK_MOUT_SW_ACLK400>, + <&clock CLK_MOUT_USER_ACLK400_DISP1>; + clock-names = "oscclk", "pclk0", "clk0", + "pclk1", "clk1", "pclk2", "clk2"; }; pinctrl_0: pinctrl@13400000 { @@ -537,6 +555,7 @@ fimd: fimd@14400000 { clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; + power-domains = <&disp_pd>; }; adc: adc@12D10000 { @@ -710,6 +729,7 @@ phy = <&hdmiphy>; samsung,syscon-phandle = <&pmu_system_controller>; status = "disabled"; + power-domains = <&disp_pd>; }; hdmiphy: hdmiphy@145D0000 { @@ -720,8 +740,10 @@ compatible = "samsung,exynos5420-mixer"; reg = <0x14450000 0x10000>; interrupts = <0 94 0>; - clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>; - clock-names = "mixer", "sclk_hdmi"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>; + clock-names = "mixer", "hdmi", "sclk_hdmi"; + power-domains = <&disp_pd>; }; gsc_0: video-scaler@13e00000 { @@ -730,7 +752,7 @@ interrupts = <0 85 0>; clocks = <&clock CLK_GSCL0>; clock-names = "gscl"; - samsung,power-domain = <&gsc_pd>; + power-domains = <&gsc_pd>; }; gsc_1: video-scaler@13e10000 { @@ -739,7 +761,7 @@ interrupts = <0 86 0>; clocks = <&clock CLK_GSCL1>; clock-names = "gscl"; - samsung,power-domain = <&gsc_pd>; + power-domains = <&gsc_pd>; }; pmu_system_controller: system-controller@10040000 { @@ -761,6 +783,7 @@ interrupts = <0 65 0>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_cpu1: tmu@10064000 { @@ -769,6 +792,7 @@ interrupts = <0 183 0>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_cpu2: tmu@10068000 { @@ -777,6 +801,7 @@ interrupts = <0 184 0>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_cpu3: tmu@1006c000 { @@ -785,6 +810,7 @@ interrupts = <0 185 0>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_gpu: tmu@100a0000 { @@ -793,6 +819,30 @@ interrupts = <0 215 0>; clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmu_cpu0>; + #include "exynos5420-trip-points.dtsi" + }; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmu_cpu1>; + #include "exynos5420-trip-points.dtsi" + }; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmu_cpu2>; + #include "exynos5420-trip-points.dtsi" + }; + cpu3_thermal: cpu3-thermal { + thermal-sensors = <&tmu_cpu3>; + #include "exynos5420-trip-points.dtsi" + }; + gpu_thermal: gpu-thermal { + thermal-sensors = <&tmu_gpu>; + #include "exynos5420-trip-points.dtsi" + }; }; watchdog: watchdog@101D0000 { diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts new file mode 100644 index 000000000000..a519c863248d --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -0,0 +1,371 @@ +/* + * Hardkernel Odroid XU3 board device tree source + * + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5800.dtsi" + +/ { + model = "Hardkernel Odroid XU3"; + compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5"; + + memory { + reg = <0x40000000 0x7EA00000>; + }; + + chosen { + linux,stdout-path = &serial_2; + }; + + fimd@14400000 { + status = "okay"; + }; + + firmware@02073000 { + compatible = "samsung,secure-firmware"; + reg = <0x02073000 0x1000>; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; + + hsi2c_4: i2c@12CA0000 { + status = "okay"; + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + s2mps11,buck2-ramp-delay = <12>; + s2mps11,buck34-ramp-delay = <12>; + s2mps11,buck16-ramp-delay = <12>; + s2mps11,buck6-ramp-enable = <1>; + s2mps11,buck2-ramp-enable = <1>; + s2mps11,buck3-ramp-enable = <1>; + s2mps11,buck4-ramp-enable = <1>; + + s2mps11_osc: clocks { + #clock-cells = <1>; + clock-output-names = "s2mps11_ap", + "s2mps11_cp", "s2mps11_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "vdd_ldo1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "vdd_ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "vdd_ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_ldo6"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "vdd_ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "vdd_ldo8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "vdd_ldo9"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "vdd_ldo10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "vdd_ldo12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "vdd_ldo13"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "vdd_ldo15"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "vdd_ldo16"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "tsp_avdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo19_reg: LDO19 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo24_reg: LDO24 { + regulator-name = "tsp_io"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo26_reg: LDO26 { + regulator-name = "vdd_ldo26"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_mem"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "vdd_1.0v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "vdd_1.8v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_2.8v_ldo"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3750000>; + regulator-always-on; + regulator-boot-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_vmem"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; + + i2c_2: i2c@12C80000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + status = "okay"; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; + }; + + rtc@101E0000 { + status = "okay"; + }; +}; + +&hdmi { + status = "okay"; + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + + vdd_osc-supply = <&ldo7_reg>; + vdd_pll-supply = <&ldo6_reg>; + vdd-supply = <&ldo6_reg>; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; + +&mmc_0 { + status = "okay"; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&mmc_2 { + status = "okay"; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + bus-width = <4>; + cap-sd-highspeed; +}; + +&pinctrl_0 { + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "otg"; +}; + +&i2c_0 { + status = "okay"; + + /* A15 cluster: VDD_ARM */ + ina231@40 { + compatible = "ti,ina231"; + reg = <0x40>; + shunt-resistor = <10000>; + }; + + /* memory: VDD_MEM */ + ina231@41 { + compatible = "ti,ina231"; + reg = <0x41>; + shunt-resistor = <10000>; + }; + + /* GPU: VDD_G3D */ + ina231@44 { + compatible = "ti,ina231"; + reg = <0x44>; + shunt-resistor = <10000>; + }; + + /* A7 cluster: VDD_KFC */ + ina231@45 { + compatible = "ti,ina231"; + reg = <0x45>; + shunt-resistor = <10000>; + }; +}; diff --git a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi new file mode 100644 index 000000000000..7b2fba0ae92b --- /dev/null +++ b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi @@ -0,0 +1,24 @@ +/* + * Device tree sources for Exynos5440 TMU sensor configuration + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <dt-bindings/thermal/thermal_exynos.h> + +#thermal-sensor-cells = <0>; +samsung,tmu_gain = <5>; +samsung,tmu_reference_voltage = <16>; +samsung,tmu_noise_cancel_mode = <4>; +samsung,tmu_efuse_value = <0x5d2d>; +samsung,tmu_min_efuse_value = <16>; +samsung,tmu_max_efuse_value = <76>; +samsung,tmu_first_point_trim = <25>; +samsung,tmu_second_point_trim = <70>; +samsung,tmu_default_temp_offset = <25>; +samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; diff --git a/arch/arm/boot/dts/exynos5440-trip-points.dtsi b/arch/arm/boot/dts/exynos5440-trip-points.dtsi new file mode 100644 index 000000000000..48adfa8f4300 --- /dev/null +++ b/arch/arm/boot/dts/exynos5440-trip-points.dtsi @@ -0,0 +1,25 @@ +/* + * Device tree sources for default Exynos5440 thermal zone definition + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +polling-delay-passive = <0>; +polling-delay = <0>; +trips { + cpu-alert-0 { + temperature = <100000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "active"; + }; + cpu-crit-0 { + temperature = <1050000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; +}; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 8f3373cd7b87..59d9416b3b03 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -219,6 +219,7 @@ interrupts = <0 58 0>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" }; tmuctrl_1: tmuctrl@16011C { @@ -227,6 +228,7 @@ interrupts = <0 58 0>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" }; tmuctrl_2: tmuctrl@160120 { @@ -235,6 +237,22 @@ interrupts = <0 58 0>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" + }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmuctrl_0>; + #include "exynos5440-trip-points.dtsi" + }; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmuctrl_1>; + #include "exynos5440-trip-points.dtsi" + }; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmuctrl_2>; + #include "exynos5440-trip-points.dtsi" + }; }; sata@210000 { diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index e8fdda827fc9..06737c60d333 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -13,6 +13,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/maxim,max77802.h> +#include <dt-bindings/regulator/maxim,max77802.h> #include "exynos5800.dtsi" / { @@ -52,7 +53,7 @@ compatible = "gpio-keys"; pinctrl-names = "default"; - pinctrl-0 = <&power_key_irq>; + pinctrl-0 = <&power_key_irq &lid_irq>; power { label = "Power"; @@ -60,6 +61,16 @@ linux,code = <KEY_POWER>; gpio-key,wakeup; }; + + lid-switch { + label = "Lid"; + gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; memory { @@ -191,6 +202,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck2_reg: BUCK2 { @@ -200,6 +214,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck3_reg: BUCK3 { @@ -209,6 +226,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck4_reg: BUCK4 { @@ -218,6 +238,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck5_reg: BUCK5 { @@ -226,6 +249,9 @@ regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck6_reg: BUCK6 { @@ -235,6 +261,9 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck7_reg: BUCK7 { @@ -243,6 +272,9 @@ regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; buck8_reg: BUCK8 { @@ -251,6 +283,9 @@ regulator-max-microvolt = <2850000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck9_reg: BUCK9 { @@ -259,6 +294,9 @@ regulator-max-microvolt = <2000000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; buck10_reg: BUCK10 { @@ -267,6 +305,9 @@ regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo1_reg: LDO1 { @@ -274,6 +315,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo2_reg: LDO2 { @@ -287,6 +332,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; vqmmc_sdcard: ldo4_reg: LDO4 { @@ -294,6 +343,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo5_reg: LDO5 { @@ -301,6 +353,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo6_reg: LDO6 { @@ -308,6 +363,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo7_reg: LDO7 { @@ -321,6 +379,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo9_reg: LDO9 { @@ -328,6 +389,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo10_reg: LDO10 { @@ -335,6 +400,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo11_reg: LDO11 { @@ -342,6 +410,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo12_reg: LDO12 { @@ -349,6 +421,9 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo13_reg: LDO13 { @@ -356,6 +431,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; ldo14_reg: LDO14 { @@ -363,6 +442,9 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo15_reg: LDO15 { @@ -370,6 +452,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo17_reg: LDO17 { @@ -377,6 +462,9 @@ regulator-min-microvolt = <900000>; regulator-max-microvolt = <1400000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo18_reg: LDO18 { @@ -450,6 +538,9 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo32_reg: LDO32 { @@ -646,6 +737,13 @@ samsung,pin-drv = <0>; }; + lid_irq: lid-irq { + samsung,pins = "gpx3-4"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + hdmi_hpd_irq: hdmi-hpd-irq { samsung,pins = "gpx3-7"; samsung,pin-function = <0>; @@ -803,6 +901,7 @@ }; tps65090_fet5: fet5 { regulator-name = "camout"; + regulator-always-on; }; tps65090_fet6: fet6 { regulator-name = "lcd_vdd"; diff --git a/arch/arm/boot/dts/hip01-ca9x2.dts b/arch/arm/boot/dts/hip01-ca9x2.dts new file mode 100644 index 000000000000..eca5e42770fe --- /dev/null +++ b/arch/arm/boot/dts/hip01-ca9x2.dts @@ -0,0 +1,51 @@ +/* + * Hisilicon Ltd. HiP01 SoC + * + * Copyright (C) 2014 Hisilicon Ltd. + * Copyright (C) 2014 Huawei Ltd. + * + * Author: Wang Long <long.wanglong@huawei.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +/* First 8KB reserved for secondary core boot */ +/memreserve/ 0x80000000 0x00002000; + +#include "hip01.dtsi" + +/ { + model = "Hisilicon HIP01 Development Board"; + compatible = "hisilicon,hip01-ca9x2", "hisilicon,hip01"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "hisilicon,hip01-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi new file mode 100644 index 000000000000..33130f8461c3 --- /dev/null +++ b/arch/arm/boot/dts/hip01.dtsi @@ -0,0 +1,110 @@ +/* + * Hisilicon Ltd. HiP01 SoC + * + * Copyright (c) 2014 Hisilicon Ltd. + * Copyright (c) 2014 Huawei Ltd. + * + * Author: Wang Long <long.wanglong@huawei.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + gic: interrupt-controller@1e001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1a001000 0x1000>, <0x1a000100 0x1000>; + }; + + hisi_refclk144mhz: refclk144mkhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <144000000>; + clock-output-names = "hisi:refclk144khz"; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges = <0 0x10000000 0x20000000>; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + ranges; + + uart0: uart@10001000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10001000 0x1000>; + clocks = <&hisi_refclk144mhz>; + clock-names = "apb_pclk"; + reg-shift = <2>; + interrupts = <0 32 4>; + status = "disabled"; + }; + + uart1: uart@10002000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10002000 0x1000>; + clocks = <&hisi_refclk144mhz>; + clock-names = "apb_pclk"; + reg-shift = <2>; + interrupts = <0 33 4>; + status = "disabled"; + }; + + uart2: uart@10003000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10003000 0x1000>; + clocks = <&hisi_refclk144mhz>; + clock-names = "apb_pclk"; + reg-shift = <2>; + interrupts = <0 34 4>; + status = "disabled"; + }; + + uart3: uart@10006000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10006000 0x1000>; + clocks = <&hisi_refclk144mhz>; + clock-names = "apb_pclk"; + reg-shift = <2>; + interrupts = <0 4 4>; + status = "disabled"; + }; + }; + + system-controller@10000000 { + compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl"; + reg = <0x10000000 0x1000>; + reboot-offset = <0x4>; + }; + + global_timer@0a000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x0a000200 0x100>; + interrupts = <1 11 0xf04>; + clocks = <&hisi_refclk144mhz>; + }; + + local_timer@0a000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x0a000600 0x100>; + interrupts = <1 13 0xf04>; + clocks = <&hisi_refclk144mhz>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts index da306c5dd678..bba3f41b89ef 100644 --- a/arch/arm/boot/dts/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/imx27-apf27dev.dts @@ -59,6 +59,21 @@ linux,default-trigger = "heartbeat"; }; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_max5821: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "max5821-reg"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + }; }; &cspi1 { @@ -107,6 +122,12 @@ compatible = "dallas,ds1374"; reg = <0x68>; }; + + max5821@38 { + compatible = "maxim,max5821"; + reg = <0x38>; + vref-supply = <®_max5821>; + }; }; &i2c2 { diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 107d713e1cbe..4b063b68db44 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -464,7 +464,7 @@ }; coda: coda@10023000 { - compatible = "fsl,imx27-vpu"; + compatible = "fsl,imx27-vpu", "cnm,codadx6"; reg = <0x10023000 0x0200>; interrupts = <53>; clocks = <&clks IMX27_CLK_VPU_BAUD_GATE>, diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 0e13b4b10a92..279249b8c3f3 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -182,7 +182,6 @@ }; lradc@80050000 { - fsl,lradc-touchscreen-wires = <4>; status = "okay"; fsl,lradc-touchscreen-wires = <4>; fsl,ave-ctrl = <4>; diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts index c5a9a24c280a..93d3ea12328c 100644 --- a/arch/arm/boot/dts/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -16,6 +16,14 @@ model = "Armadeus Systems APF51Dev docking/development board"; compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51"; + backlight@bl1{ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + compatible = "gpio-backlight"; + gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + default-on; + }; + display@di1 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "bgr666"; @@ -114,6 +122,12 @@ pinctrl-0 = <&pinctrl_hog>; imx51-apf51dev { + pinctrl_backlight: bl1grp { + fsl,pins = < + MX51_PAD_DI1_D1_CS__GPIO3_4 0x1F5 + >; + }; + pinctrl_hog: hoggrp { fsl,pins = < MX51_PAD_EIM_EB2__GPIO2_22 0x0C5 diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index a30bddfdbdb6..ff4fa7ecacd8 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -756,7 +756,7 @@ }; vpu: vpu@63ff4000 { - compatible = "fsl,imx53-vpu"; + compatible = "fsl,imx53-vpu", "cnm,coda7541"; reg = <0x63ff4000 0x1000>; interrupts = <9>; clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>, @@ -765,6 +765,15 @@ resets = <&src 1>; iram = <&ocram>; }; + + sahara: crypto@63ff8000 { + compatible = "fsl,imx53-sahara"; + reg = <0x63ff8000 0x4000>; + interrupts = <19 20>; + clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>, + <&clks IMX5_CLK_SAHARA_IPG_GATE>; + clock-names = "ipg", "ahb"; + }; }; ocram: sram@f8000000 { diff --git a/arch/arm/boot/dts/imx6dl-udoo.dts b/arch/arm/boot/dts/imx6dl-udoo.dts new file mode 100644 index 000000000000..e3713f00e819 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-udoo.dts @@ -0,0 +1,18 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-udoo.dtsi" + +/ { + model = "Udoo i.MX6 Dual-lite Board"; + compatible = "udoo,imx6dl-udoo", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 1ac2fe732867..f94bf72832af 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -28,7 +28,7 @@ next-level-cache = <&L2>; operating-points = < /* kHz uV */ - 996000 1275000 + 996000 1250000 792000 1175000 396000 1075000 >; diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts index e3bff2ac00db..c3e64ff3d544 100644 --- a/arch/arm/boot/dts/imx6q-udoo.dts +++ b/arch/arm/boot/dts/imx6q-udoo.dts @@ -8,137 +8,15 @@ * published by the Free Software Foundation. * */ - /dts-v1/; #include "imx6q.dtsi" +#include "imx6qdl-udoo.dtsi" / { model = "Udoo i.MX6 Quad Board"; compatible = "udoo,imx6q-udoo", "fsl,imx6q"; - - chosen { - stdout-path = &uart2; - }; - - memory { - reg = <0x10000000 0x40000000>; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb_h1_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */ - gpio = <&gpio7 12 0>; - }; - }; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c2>; - status = "okay"; -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; -}; - -&iomuxc { - imx6q-udoo { - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_usbh: usbhgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 - MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - >; - }; - }; }; &sata { status = "okay"; }; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&usbh1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh>; - vbus-supply = <®_usb_h1_vbus>; - clocks = <&clks 201>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - non-removable; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 85f72e6b5bad..93ec79bb6b35 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -31,7 +31,7 @@ 1200000 1275000 996000 1250000 852000 1250000 - 792000 1150000 + 792000 1175000 396000 975000 >; fsl,soc-operating-points = < @@ -95,6 +95,8 @@ clocks = <&clks IMX6Q_CLK_ECSPI5>, <&clks IMX6Q_CLK_ECSPI5>; clock-names = "ipg", "per"; + dmas = <&sdma 11 7 1>, <&sdma 12 7 2>; + dma-names = "rx", "tx"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 0a36129152e0..0b28a9d5241e 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -173,6 +173,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -188,6 +193,20 @@ }; }; +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; @@ -265,6 +284,20 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index f1cd2147421d..a626e6dd8022 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -35,6 +35,7 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio3 22 0>; enable-active-high; + vin-supply = <&swbst_reg>; }; reg_usb_h1_vbus: regulator@1 { @@ -45,6 +46,7 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio1 29 0>; enable-active-high; + vin-supply = <&swbst_reg>; }; reg_audio: regulator@2 { diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi new file mode 100644 index 000000000000..1211da894ee9 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -0,0 +1,134 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/ { + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_h1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */ + gpio = <&gpio7 12 0>; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&iomuxc { + imx6q-udoo { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh: usbhgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh>; + vbus-supply = <®_usb_h1_vbus>; + clocks = <&clks 201>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 2109d0763c1b..d6c69ec44314 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -339,9 +339,8 @@ <0 3 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "bit", "jpeg"; clocks = <&clks IMX6QDL_CLK_VPU_AXI>, - <&clks IMX6QDL_CLK_MMDC_CH0_AXI>, - <&clks IMX6QDL_CLK_OCRAM>; - clock-names = "per", "ahb", "ocram"; + <&clks IMX6QDL_CLK_MMDC_CH0_AXI>; + clock-names = "per", "ahb"; resets = <&src 1>; iram = <&ocram>; }; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index fda4932faefd..945887d3fdb3 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -52,6 +52,7 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio4 0 0>; enable-active-high; + vin-supply = <&swbst_reg>; }; reg_usb_otg2_vbus: regulator@1 { @@ -62,6 +63,7 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio4 2 0>; enable-active-high; + vin-supply = <&swbst_reg>; }; reg_aud3v: regulator@2 { diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts new file mode 100644 index 000000000000..e3c0b63c2205 --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -0,0 +1,146 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "imx6sx.dtsi" + +/ { + model = "Freescale i.MX6 SoloX Sabre Auto Board"; + compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx"; + + memory { + reg = <0x80000000 0x80000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vcc_sd3: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vcc_sd3>; + regulator-name = "VCC_SD3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + cd-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + keep-power-in-suspend; + enable-sdio-wakeup; + vmmc-supply = <&vcc_sd3>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + cd-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; + no-1-8-v; + keep-power-in-suspend; + enable-sdio-wakup; + status = "okay"; +}; + +&iomuxc { + imx6x-sabreauto { + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059 + MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */ + MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */ + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 + MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */ + MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */ + >; + }; + + pinctrl_vcc_sd3: vccsd3grp { + fsl,pins = < + MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index c108bb451337..32f07d6b4042 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -355,6 +355,28 @@ status = "okay"; }; +&qspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi2>; + status = "okay"; + + flash0: s25fl128s@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl128s"; + spi-max-frequency = <66000000>; + }; + + flash1: s25fl128s@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl128s"; + spi-max-frequency = <66000000>; + }; +}; + &ssi2 { status = "okay"; }; @@ -539,6 +561,23 @@ >; }; + pinctrl_qspi2: qspi2grp { + fsl,pins = < + MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1 + MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1 + MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1 + MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1 + MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1 + MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1 + MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1 + MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1 + MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1 + MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1 + MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1 + MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1 + >; + }; + pinctrl_vcc_sd3: vccsd3grp { fsl,pins = < MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi index dd81508b919b..9e6e9e2691d5 100644 --- a/arch/arm/boot/dts/kirkwood-6192.dtsi +++ b/arch/arm/boot/dts/kirkwood-6192.dtsi @@ -66,6 +66,8 @@ interrupts = <21>; clocks = <&gate_clk 14>, <&gate_clk 15>; clock-names = "0", "1"; + phys = <&sata_phy0>, <&sata_phy1>; + phy-names = "port0", "port1"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts new file mode 100644 index 000000000000..fa02a9aff05e --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts @@ -0,0 +1,173 @@ +/* + * Device Tree file for Seagate Blackarmor NAS220 + * + * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com> + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "kirkwood.dtsi" +#include "kirkwood-6192.dtsi" + +/ { + model = "Seagate Blackarmor NAS220"; + compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192", + "marvell,kirkwood"; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button@1{ + label = "Reset"; + linux,code = <KEY_POWER>; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + + button@2{ + label = "Power"; + linux,code = <KEY_SLEEP>; + gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + blue-power { + label = "nas220:blue:power"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>; + pinctrl-names = "default"; + + sata0_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + + sata1_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "SATA1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 28 GPIO_ACTIVE_LOW>; + }; + }; +}; + +/* + * Serial port routed to connector CN5 + * + * pin 1 - TX (CPU's TX) + * pin 4 - RX (CPU's RX) + * pin 6 - GND + */ +&uart0 { + status = "okay"; +}; + +&pinctrl { + pinctrl-0 = <&pmx_button_reset &pmx_button_power>; + pinctrl-names = "default"; + + pmx_act_sata0: pmx-act-sata0 { + marvell,pins = "mpp15"; + marvell,function = "sata0"; + }; + + pmx_act_sata1: pmx-act-sata1 { + marvell,pins = "mpp16"; + marvell,function = "sata1"; + }; + + pmx_power_sata0: pmx-power-sata0 { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + + pmx_power_sata1: pmx-power-sata1 { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_button_power: pmx-button-power { + marvell,pins = "mpp26"; + marvell,function = "gpio"; + }; +}; + +&sata { + status = "okay"; + nr-ports = <2>; +}; + +&i2c0 { + status = "okay"; + + adt7476: thermal@2e { + compatible = "adi,adt7476"; + reg = <0x2e>; + }; +}; + +&nand { + status = "okay"; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@8 { + reg = <8>; + }; +}; + +ð0 { + status = "okay"; + + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 05291f3990d0..8474bffec0ca 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -169,6 +169,10 @@ gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; }; }; + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; }; &nand { @@ -192,8 +196,8 @@ }; partition@400000 { - label = "uInitrd"; - reg = <0x540000 0x1000000>; + label = "rootfs"; + reg = <0x400000 0x1C00000>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-pogo_e02.dts b/arch/arm/boot/dts/kirkwood-pogo_e02.dts new file mode 100644 index 000000000000..a190080c9c4f --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts @@ -0,0 +1,134 @@ +/* + * kirkwood-pogo_e02.dts - Device tree file for Pogoplug E02 + * + * Copyright (C) 2015 Christoph Junghans <ottxor@gentoo.org> + * + * based on information of dts files from + * Arch Linux ARM by Oleg Rakhmanov <moonman.ca@gmail.com> + * OpenWrt by Felix Kaechele <heffer@fedoraproject.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + model = "Cloud Engines Pogoplug E02"; + compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281", + "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + gpio-leds { + compatible = "gpio-leds"; + + health { + label = "pogo_e02:green:health"; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + fault { + label = "pogo_e02:orange:fault"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_usb_power_enable>; + pinctrl-names = "default"; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange + &pmx_led_green >; + pinctrl-names = "default"; + + pmx_usb_power_enable: pmx-usb-power-enable { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_led_green: pmx-led-green { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + + pmx_led_orange: pmx-led-orange { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&nand { + chip-delay = <40>; + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "pogoplug"; + reg = <0x0500000 0x2000000>; + }; + + partition@2500000 { + label = "root"; + reg = <0x02500000 0x5b00000>; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/marco-evb.dts b/arch/arm/boot/dts/marco-evb.dts deleted file mode 100644 index 5130aeacfca5..000000000000 --- a/arch/arm/boot/dts/marco-evb.dts +++ /dev/null @@ -1,54 +0,0 @@ -/* - * DTS file for CSR SiRFmarco Evaluation Board - * - * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -/dts-v1/; - -/include/ "marco.dtsi" - -/ { - model = "CSR SiRFmarco Evaluation Board"; - compatible = "sirf,marco-cb", "sirf,marco"; - - memory { - reg = <0x40000000 0x60000000>; - }; - - axi { - peri-iobg { - uart1: uart@cc060000 { - status = "okay"; - }; - uart2: uart@cc070000 { - status = "okay"; - }; - i2c0: i2c@cc0e0000 { - status = "okay"; - fpga-cpld@4d { - compatible = "sirf,fpga-cpld"; - reg = <0x4d>; - }; - }; - spi1: spi@cc170000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>; - spi@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <1000000>; - }; - }; - pci-iobg { - sd0: sdhci@cd000000 { - bus-width = <8>; - status = "okay"; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/marco.dtsi b/arch/arm/boot/dts/marco.dtsi deleted file mode 100644 index fb354225740a..000000000000 --- a/arch/arm/boot/dts/marco.dtsi +++ /dev/null @@ -1,757 +0,0 @@ -/* - * DTS file for CSR SiRFmarco SoC - * - * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -/include/ "skeleton.dtsi" -/ { - compatible = "sirf,marco"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&gic>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0>; - }; - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <1>; - }; - }; - - axi { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x40000000 0x40000000 0xa0000000>; - - l2-cache-controller@c0030000 { - compatible = "arm,pl310-cache"; - reg = <0xc0030000 0x1000>; - interrupts = <0 59 0>; - arm,tag-latency = <1 1 1>; - arm,data-latency = <1 1 1>; - arm,filter-ranges = <0x40000000 0x80000000>; - }; - - gic: interrupt-controller@c0011000 { - compatible = "arm,cortex-a9-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0xc0011000 0x1000>, - <0xc0010100 0x0100>; - }; - - rstc-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xc2000000 0xc2000000 0x1000000>; - - rstc: reset-controller@c2000000 { - compatible = "sirf,marco-rstc"; - reg = <0xc2000000 0x10000>; - #reset-cells = <1>; - }; - }; - - sys-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xc3000000 0xc3000000 0x1000000>; - - clock-controller@c3000000 { - compatible = "sirf,marco-clkc"; - reg = <0xc3000000 0x1000>; - interrupts = <0 3 0>; - }; - - rsc-controller@c3010000 { - compatible = "sirf,marco-rsc"; - reg = <0xc3010000 0x1000>; - }; - }; - - mem-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xc4000000 0xc4000000 0x1000000>; - - memory-controller@c4000000 { - compatible = "sirf,marco-memc"; - reg = <0xc4000000 0x10000>; - interrupts = <0 27 0>; - }; - }; - - disp-iobg0 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xc5000000 0xc5000000 0x1000000>; - - display0@c5000000 { - compatible = "sirf,marco-lcd"; - reg = <0xc5000000 0x10000>; - interrupts = <0 30 0>; - }; - - vpp0@c5010000 { - compatible = "sirf,marco-vpp"; - reg = <0xc5010000 0x10000>; - interrupts = <0 31 0>; - }; - }; - - disp-iobg1 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xc6000000 0xc6000000 0x1000000>; - - display1@c6000000 { - compatible = "sirf,marco-lcd"; - reg = <0xc6000000 0x10000>; - interrupts = <0 62 0>; - }; - - vpp1@c6010000 { - compatible = "sirf,marco-vpp"; - reg = <0xc6010000 0x10000>; - interrupts = <0 63 0>; - }; - }; - - graphics-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xc8000000 0xc8000000 0x1000000>; - - graphics@c8000000 { - compatible = "powervr,sgx540"; - reg = <0xc8000000 0x1000000>; - interrupts = <0 6 0>; - }; - }; - - multimedia-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xc9000000 0xc9000000 0x1000000>; - - multimedia@a0000000 { - compatible = "sirf,marco-video-codec"; - reg = <0xc9000000 0x1000000>; - interrupts = <0 5 0>; - }; - }; - - dsp-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xca000000 0xca000000 0x2000000>; - - dspif@ca000000 { - compatible = "sirf,marco-dspif"; - reg = <0xca000000 0x10000>; - interrupts = <0 9 0>; - }; - - gps@ca010000 { - compatible = "sirf,marco-gps"; - reg = <0xca010000 0x10000>; - interrupts = <0 7 0>; - }; - - dsp@cb000000 { - compatible = "sirf,marco-dsp"; - reg = <0xcb000000 0x1000000>; - interrupts = <0 8 0>; - }; - }; - - peri-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xcc000000 0xcc000000 0x2000000>; - - timer@cc020000 { - compatible = "sirf,marco-tick"; - reg = <0xcc020000 0x1000>; - interrupts = <0 0 0>, - <0 1 0>, - <0 2 0>, - <0 49 0>, - <0 50 0>, - <0 51 0>; - }; - - nand@cc030000 { - compatible = "sirf,marco-nand"; - reg = <0xcc030000 0x10000>; - interrupts = <0 41 0>; - }; - - audio@cc040000 { - compatible = "sirf,marco-audio"; - reg = <0xcc040000 0x10000>; - interrupts = <0 35 0>; - }; - - uart0: uart@cc050000 { - cell-index = <0>; - compatible = "sirf,marco-uart"; - reg = <0xcc050000 0x1000>; - interrupts = <0 17 0>; - fifosize = <128>; - status = "disabled"; - }; - - uart1: uart@cc060000 { - cell-index = <1>; - compatible = "sirf,marco-uart"; - reg = <0xcc060000 0x1000>; - interrupts = <0 18 0>; - fifosize = <32>; - status = "disabled"; - }; - - uart2: uart@cc070000 { - cell-index = <2>; - compatible = "sirf,marco-uart"; - reg = <0xcc070000 0x1000>; - interrupts = <0 19 0>; - fifosize = <128>; - status = "disabled"; - }; - - uart3: uart@cc190000 { - cell-index = <3>; - compatible = "sirf,marco-uart"; - reg = <0xcc190000 0x1000>; - interrupts = <0 66 0>; - fifosize = <128>; - status = "disabled"; - }; - - uart4: uart@cc1a0000 { - cell-index = <4>; - compatible = "sirf,marco-uart"; - reg = <0xcc1a0000 0x1000>; - interrupts = <0 69 0>; - fifosize = <128>; - status = "disabled"; - }; - - usp0: usp@cc080000 { - cell-index = <0>; - compatible = "sirf,marco-usp"; - reg = <0xcc080000 0x10000>; - interrupts = <0 20 0>; - status = "disabled"; - }; - - usp1: usp@cc090000 { - cell-index = <1>; - compatible = "sirf,marco-usp"; - reg = <0xcc090000 0x10000>; - interrupts = <0 21 0>; - status = "disabled"; - }; - - usp2: usp@cc0a0000 { - cell-index = <2>; - compatible = "sirf,marco-usp"; - reg = <0xcc0a0000 0x10000>; - interrupts = <0 22 0>; - status = "disabled"; - }; - - dmac0: dma-controller@cc0b0000 { - cell-index = <0>; - compatible = "sirf,marco-dmac"; - reg = <0xcc0b0000 0x10000>; - interrupts = <0 12 0>; - }; - - dmac1: dma-controller@cc160000 { - cell-index = <1>; - compatible = "sirf,marco-dmac"; - reg = <0xcc160000 0x10000>; - interrupts = <0 13 0>; - }; - - vip@cc0c0000 { - compatible = "sirf,marco-vip"; - reg = <0xcc0c0000 0x10000>; - }; - - spi0: spi@cc0d0000 { - cell-index = <0>; - compatible = "sirf,marco-spi"; - reg = <0xcc0d0000 0x10000>; - interrupts = <0 15 0>; - sirf,spi-num-chipselects = <1>; - cs-gpios = <&gpio 0 0>; - sirf,spi-dma-rx-channel = <25>; - sirf,spi-dma-tx-channel = <20>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi1: spi@cc170000 { - cell-index = <1>; - compatible = "sirf,marco-spi"; - reg = <0xcc170000 0x10000>; - interrupts = <0 16 0>; - sirf,spi-num-chipselects = <1>; - cs-gpios = <&gpio 0 0>; - sirf,spi-dma-rx-channel = <12>; - sirf,spi-dma-tx-channel = <13>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c0: i2c@cc0e0000 { - cell-index = <0>; - compatible = "sirf,marco-i2c"; - reg = <0xcc0e0000 0x10000>; - interrupts = <0 24 0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c1: i2c@cc0f0000 { - cell-index = <1>; - compatible = "sirf,marco-i2c"; - reg = <0xcc0f0000 0x10000>; - interrupts = <0 25 0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - tsc@cc110000 { - compatible = "sirf,marco-tsc"; - reg = <0xcc110000 0x10000>; - interrupts = <0 33 0>; - }; - - gpio: pinctrl@cc120000 { - #gpio-cells = <2>; - #interrupt-cells = <2>; - compatible = "sirf,marco-pinctrl"; - reg = <0xcc120000 0x10000>; - interrupts = <0 43 0>, - <0 44 0>, - <0 45 0>, - <0 46 0>, - <0 47 0>; - gpio-controller; - interrupt-controller; - - lcd_16pins_a: lcd0_0 { - lcd { - sirf,pins = "lcd_16bitsgrp"; - sirf,function = "lcd_16bits"; - }; - }; - lcd_18pins_a: lcd0_1 { - lcd { - sirf,pins = "lcd_18bitsgrp"; - sirf,function = "lcd_18bits"; - }; - }; - lcd_24pins_a: lcd0_2 { - lcd { - sirf,pins = "lcd_24bitsgrp"; - sirf,function = "lcd_24bits"; - }; - }; - lcdrom_pins_a: lcdrom0_0 { - lcd { - sirf,pins = "lcdromgrp"; - sirf,function = "lcdrom"; - }; - }; - uart0_pins_a: uart0_0 { - uart { - sirf,pins = "uart0grp"; - sirf,function = "uart0"; - }; - }; - uart1_pins_a: uart1_0 { - uart { - sirf,pins = "uart1grp"; - sirf,function = "uart1"; - }; - }; - uart2_pins_a: uart2_0 { - uart { - sirf,pins = "uart2grp"; - sirf,function = "uart2"; - }; - }; - uart2_noflow_pins_a: uart2_1 { - uart { - sirf,pins = "uart2_nostreamctrlgrp"; - sirf,function = "uart2_nostreamctrl"; - }; - }; - spi0_pins_a: spi0_0 { - spi { - sirf,pins = "spi0grp"; - sirf,function = "spi0"; - }; - }; - spi1_pins_a: spi1_0 { - spi { - sirf,pins = "spi1grp"; - sirf,function = "spi1"; - }; - }; - i2c0_pins_a: i2c0_0 { - i2c { - sirf,pins = "i2c0grp"; - sirf,function = "i2c0"; - }; - }; - i2c1_pins_a: i2c1_0 { - i2c { - sirf,pins = "i2c1grp"; - sirf,function = "i2c1"; - }; - }; - pwm0_pins_a: pwm0_0 { - pwm { - sirf,pins = "pwm0grp"; - sirf,function = "pwm0"; - }; - }; - pwm1_pins_a: pwm1_0 { - pwm { - sirf,pins = "pwm1grp"; - sirf,function = "pwm1"; - }; - }; - pwm2_pins_a: pwm2_0 { - pwm { - sirf,pins = "pwm2grp"; - sirf,function = "pwm2"; - }; - }; - pwm3_pins_a: pwm3_0 { - pwm { - sirf,pins = "pwm3grp"; - sirf,function = "pwm3"; - }; - }; - gps_pins_a: gps_0 { - gps { - sirf,pins = "gpsgrp"; - sirf,function = "gps"; - }; - }; - vip_pins_a: vip_0 { - vip { - sirf,pins = "vipgrp"; - sirf,function = "vip"; - }; - }; - sdmmc0_pins_a: sdmmc0_0 { - sdmmc0 { - sirf,pins = "sdmmc0grp"; - sirf,function = "sdmmc0"; - }; - }; - sdmmc1_pins_a: sdmmc1_0 { - sdmmc1 { - sirf,pins = "sdmmc1grp"; - sirf,function = "sdmmc1"; - }; - }; - sdmmc2_pins_a: sdmmc2_0 { - sdmmc2 { - sirf,pins = "sdmmc2grp"; - sirf,function = "sdmmc2"; - }; - }; - sdmmc3_pins_a: sdmmc3_0 { - sdmmc3 { - sirf,pins = "sdmmc3grp"; - sirf,function = "sdmmc3"; - }; - }; - sdmmc4_pins_a: sdmmc4_0 { - sdmmc4 { - sirf,pins = "sdmmc4grp"; - sirf,function = "sdmmc4"; - }; - }; - sdmmc5_pins_a: sdmmc5_0 { - sdmmc5 { - sirf,pins = "sdmmc5grp"; - sirf,function = "sdmmc5"; - }; - }; - i2s_pins_a: i2s_0 { - i2s { - sirf,pins = "i2sgrp"; - sirf,function = "i2s"; - }; - }; - ac97_pins_a: ac97_0 { - ac97 { - sirf,pins = "ac97grp"; - sirf,function = "ac97"; - }; - }; - nand_pins_a: nand_0 { - nand { - sirf,pins = "nandgrp"; - sirf,function = "nand"; - }; - }; - usp0_pins_a: usp0_0 { - usp0 { - sirf,pins = "usp0grp"; - sirf,function = "usp0"; - }; - }; - usp1_pins_a: usp1_0 { - usp1 { - sirf,pins = "usp1grp"; - sirf,function = "usp1"; - }; - }; - usp2_pins_a: usp2_0 { - usp2 { - sirf,pins = "usp2grp"; - sirf,function = "usp2"; - }; - }; - usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus_0 { - usb0_utmi_drvbus { - sirf,pins = "usb0_utmi_drvbusgrp"; - sirf,function = "usb0_utmi_drvbus"; - }; - }; - usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus_0 { - usb1_utmi_drvbus { - sirf,pins = "usb1_utmi_drvbusgrp"; - sirf,function = "usb1_utmi_drvbus"; - }; - }; - warm_rst_pins_a: warm_rst_0 { - warm_rst { - sirf,pins = "warm_rstgrp"; - sirf,function = "warm_rst"; - }; - }; - pulse_count_pins_a: pulse_count_0 { - pulse_count { - sirf,pins = "pulse_countgrp"; - sirf,function = "pulse_count"; - }; - }; - cko0_rst_pins_a: cko0_rst_0 { - cko0_rst { - sirf,pins = "cko0_rstgrp"; - sirf,function = "cko0_rst"; - }; - }; - cko1_rst_pins_a: cko1_rst_0 { - cko1_rst { - sirf,pins = "cko1_rstgrp"; - sirf,function = "cko1_rst"; - }; - }; - }; - - pwm@cc130000 { - compatible = "sirf,marco-pwm"; - reg = <0xcc130000 0x10000>; - }; - - efusesys@cc140000 { - compatible = "sirf,marco-efuse"; - reg = <0xcc140000 0x10000>; - }; - - pulsec@cc150000 { - compatible = "sirf,marco-pulsec"; - reg = <0xcc150000 0x10000>; - interrupts = <0 48 0>; - }; - - pci-iobg { - compatible = "sirf,marco-pciiobg", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xcd000000 0xcd000000 0x1000000>; - - sd0: sdhci@cd000000 { - cell-index = <0>; - compatible = "sirf,marco-sdhc"; - reg = <0xcd000000 0x100000>; - interrupts = <0 38 0>; - status = "disabled"; - }; - - sd1: sdhci@cd100000 { - cell-index = <1>; - compatible = "sirf,marco-sdhc"; - reg = <0xcd100000 0x100000>; - interrupts = <0 38 0>; - status = "disabled"; - }; - - sd2: sdhci@cd200000 { - cell-index = <2>; - compatible = "sirf,marco-sdhc"; - reg = <0xcd200000 0x100000>; - interrupts = <0 23 0>; - status = "disabled"; - }; - - sd3: sdhci@cd300000 { - cell-index = <3>; - compatible = "sirf,marco-sdhc"; - reg = <0xcd300000 0x100000>; - interrupts = <0 23 0>; - status = "disabled"; - }; - - sd4: sdhci@cd400000 { - cell-index = <4>; - compatible = "sirf,marco-sdhc"; - reg = <0xcd400000 0x100000>; - interrupts = <0 39 0>; - status = "disabled"; - }; - - sd5: sdhci@cd500000 { - cell-index = <5>; - compatible = "sirf,marco-sdhc"; - reg = <0xcd500000 0x100000>; - interrupts = <0 39 0>; - status = "disabled"; - }; - - pci-copy@cd900000 { - compatible = "sirf,marco-pcicp"; - reg = <0xcd900000 0x100000>; - interrupts = <0 40 0>; - }; - - rom-interface@cda00000 { - compatible = "sirf,marco-romif"; - reg = <0xcda00000 0x100000>; - }; - }; - }; - - rtc-iobg { - compatible = "sirf,marco-rtciobg", "sirf-marco-rtciobg-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0xc1000000 0x10000>; - - gpsrtc@1000 { - compatible = "sirf,marco-gpsrtc"; - reg = <0x1000 0x1000>; - interrupts = <0 55 0>, - <0 56 0>, - <0 57 0>; - }; - - sysrtc@2000 { - compatible = "sirf,marco-sysrtc"; - reg = <0x2000 0x1000>; - interrupts = <0 52 0>, - <0 53 0>, - <0 54 0>; - }; - - pwrc@3000 { - compatible = "sirf,marco-pwrc"; - reg = <0x3000 0x1000>; - interrupts = <0 32 0>; - }; - }; - - uus-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xce000000 0xce000000 0x1000000>; - - usb0: usb@ce000000 { - compatible = "chipidea,ci13611a-marco"; - reg = <0xce000000 0x10000>; - interrupts = <0 10 0>; - }; - - usb1: usb@ce010000 { - compatible = "chipidea,ci13611a-marco"; - reg = <0xce010000 0x10000>; - interrupts = <0 11 0>; - }; - - security@ce020000 { - compatible = "sirf,marco-security"; - reg = <0xce020000 0x10000>; - interrupts = <0 42 0>; - }; - }; - - can-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xd0000000 0xd0000000 0x1000000>; - - can0: can@d0000000 { - compatible = "sirf,marco-can"; - reg = <0xd0000000 0x10000>; - }; - - can1: can@d0010000 { - compatible = "sirf,marco-can"; - reg = <0xd0010000 0x10000>; - }; - }; - - lvds-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xd1000000 0xd1000000 0x1000000>; - - lvds@d1000000 { - compatible = "sirf,marco-lvds"; - reg = <0xd1000000 0x10000>; - interrupts = <0 64 0>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/mt6589-aquaris5.dts b/arch/arm/boot/dts/mt6589-aquaris5.dts index 0da047013120..594a6f3bebda 100644 --- a/arch/arm/boot/dts/mt6589-aquaris5.dts +++ b/arch/arm/boot/dts/mt6589-aquaris5.dts @@ -21,10 +21,20 @@ compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589"; chosen { - bootargs = "earlyprintk"; + bootargs = "console=ttyS0,921600n8 earlyprintk"; + stdout-path = &uart0; }; memory { reg = <0x80000000 0x40000000>; }; + +}; + +&uart0 { + status = "okay"; +}; + +&uart3 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi index e3c7600ddb38..106b61b10030 100644 --- a/arch/arm/boot/dts/mt6589.dtsi +++ b/arch/arm/boot/dts/mt6589.dtsi @@ -19,7 +19,7 @@ / { compatible = "mediatek,mt6589"; - interrupt-parent = <&gic>; + interrupt-parent = <&sysirq>; cpus { #address-cells = <1>; @@ -65,6 +65,12 @@ clock-frequency = <32000>; #clock-cells = <0>; }; + + uart_clk: dummy26m { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; }; soc { @@ -76,19 +82,61 @@ timer: timer@10008000 { compatible = "mediatek,mt6577-timer"; reg = <0x10008000 0x80>; - interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>; clocks = <&system_clk>, <&rtc_clk>; clock-names = "system-clk", "rtc-clk"; }; + sysirq: interrupt-controller@10200100 { + compatible = "mediatek,mt6589-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0x10200100 0x1c>; + }; + gic: interrupt-controller@10211000 { compatible = "arm,cortex-a7-gic"; interrupt-controller; #interrupt-cells = <3>; + interrupt-parent = <&gic>; reg = <0x10211000 0x1000>, <0x10212000 0x1000>, <0x10214000 0x2000>, <0x10216000 0x2000>; }; + + uart0: serial@11006000 { + compatible = "mediatek,mt6577-uart"; + reg = <0x11006000 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart1: serial@11007000 { + compatible = "mediatek,mt6577-uart"; + reg = <0x11007000 0x400>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart2: serial@11008000 { + compatible = "mediatek,mt6577-uart"; + reg = <0x11008000 0x400>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart3: serial@11009000 { + compatible = "mediatek,mt6577-uart"; + reg = <0x11009000 0x400>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/mt6592.dtsi b/arch/arm/boot/dts/mt6592.dtsi index 31e5a0979d78..c69201ffff72 100644 --- a/arch/arm/boot/dts/mt6592.dtsi +++ b/arch/arm/boot/dts/mt6592.dtsi @@ -18,7 +18,7 @@ / { compatible = "mediatek,mt6592"; - interrupt-parent = <&gic>; + interrupt-parent = <&sysirq>; cpus { #address-cells = <1>; @@ -78,21 +78,66 @@ #clock-cells = <0>; }; + uart_clk: dummy26m { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; + timer: timer@10008000 { compatible = "mediatek,mt6577-timer"; reg = <0x10008000 0x80>; - interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>; clocks = <&system_clk>, <&rtc_clk>; clock-names = "system-clk", "rtc-clk"; }; + sysirq: interrupt-controller@10200220 { + compatible = "mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0x10200220 0x1c>; + }; + gic: interrupt-controller@10211000 { compatible = "arm,cortex-a7-gic"; interrupt-controller; #interrupt-cells = <3>; + interrupt-parent = <&gic>; reg = <0x10211000 0x1000>, <0x10212000 0x1000>; }; -}; + uart0: serial@11002000 { + compatible = "mediatek,mt6577-uart"; + reg = <0x11002000 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt6577-uart"; + reg = <0x11003000 0x400>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + uart2: serial@11004000 { + compatible = "mediatek,mt6577-uart"; + reg = <0x11004000 0x400>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart3: serial@11005000 { + compatible = "mediatek,mt6577-uart"; + reg = <0x11005000 0x400>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/mt8127-moose.dts b/arch/arm/boot/dts/mt8127-moose.dts index 13cba0e77e08..073e295a1cb4 100644 --- a/arch/arm/boot/dts/mt8127-moose.dts +++ b/arch/arm/boot/dts/mt8127-moose.dts @@ -23,3 +23,7 @@ reg = <0 0x80000000 0 0x40000000>; }; }; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi index b24c0a2f3c44..aaa786233d93 100644 --- a/arch/arm/boot/dts/mt8127.dtsi +++ b/arch/arm/boot/dts/mt8127.dtsi @@ -18,7 +18,7 @@ / { compatible = "mediatek,mt8127"; - interrupt-parent = <&gic>; + interrupt-parent = <&sysirq>; cpus { #address-cells = <1>; @@ -64,6 +64,12 @@ clock-frequency = <32000>; #clock-cells = <0>; }; + + uart_clk: dummy26m { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; }; soc { @@ -76,19 +82,61 @@ compatible = "mediatek,mt8127-timer", "mediatek,mt6577-timer"; reg = <0 0x10008000 0 0x80>; - interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>; clocks = <&system_clk>, <&rtc_clk>; clock-names = "system-clk", "rtc-clk"; }; + sysirq: interrupt-controller@10200100 { + compatible = "mediatek,mt8127-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200100 0 0x1c>; + }; + gic: interrupt-controller@10211000 { compatible = "arm,cortex-a7-gic"; interrupt-controller; #interrupt-cells = <3>; + interrupt-parent = <&gic>; reg = <0 0x10211000 0 0x1000>, <0 0x10212000 0 0x1000>, <0 0x10214000 0 0x2000>, <0 0x10216000 0 0x2000>; }; + + uart0: serial@11006000 { + compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart1: serial@11007000 { + compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x400>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart2: serial@11008000 { + compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x400>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart3: serial@11009000 { + compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart"; + reg = <0 0x11005000 0 0x400>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mt8135-evbp1.dts index a5adf9742308..36677382bdd8 100644 --- a/arch/arm/boot/dts/mt8135-evbp1.dts +++ b/arch/arm/boot/dts/mt8135-evbp1.dts @@ -23,3 +23,7 @@ reg = <0 0x80000000 0 0x40000000>; }; }; + +&uart3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi index 7d56a986358e..a161e99ffcc4 100644 --- a/arch/arm/boot/dts/mt8135.dtsi +++ b/arch/arm/boot/dts/mt8135.dtsi @@ -18,7 +18,7 @@ / { compatible = "mediatek,mt8135"; - interrupt-parent = <&gic>; + interrupt-parent = <&sysirq>; cpu-map { cluster0 { @@ -86,6 +86,13 @@ clock-frequency = <32000>; #clock-cells = <0>; }; + + uart_clk: dummy26m { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; + }; soc { @@ -98,19 +105,62 @@ compatible = "mediatek,mt8135-timer", "mediatek,mt6577-timer"; reg = <0 0x10008000 0 0x80>; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>; clocks = <&system_clk>, <&rtc_clk>; clock-names = "system-clk", "rtc-clk"; }; + sysirq: interrupt-controller@10200030 { + compatible = "mediatek,mt8135-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200030 0 0x1c>; + }; + gic: interrupt-controller@10211000 { compatible = "arm,cortex-a15-gic"; interrupt-controller; #interrupt-cells = <3>; + interrupt-parent = <&gic>; reg = <0 0x10211000 0 0x1000>, <0 0x10212000 0 0x1000>, <0 0x10214000 0 0x2000>, <0 0x10216000 0 0x2000>; }; + + uart0: serial@11006000 { + compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart"; + reg = <0 0x11006000 0 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart1: serial@11007000 { + compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart"; + reg = <0 0x11007000 0 0x400>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart2: serial@11008000 { + compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart"; + reg = <0 0x11008000 0 0x400>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart3: serial@11009000 { + compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart"; + reg = <0 0x11009000 0 0x400>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + }; }; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 59d1c297bb30..578fa2a54dce 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -87,8 +87,8 @@ <14>, <15>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <64>; + dma-channels = <32>; + dma-requests = <64>; }; i2c1: i2c@48070000 { diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index 6ea6d460db30..4d091ca43e25 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -259,3 +259,61 @@ pinctrl-names = "default"; pinctrl-0 = <&mcbsp2_pins>; }; + +&gpmc { + ranges = <0 0 0x00000000 0x01000000>; + + nand@0,0 { + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + nand-bus-width = <8>; + gpmc,device-width = <1>; + ti,nand-ecc-opt = "sw"; + + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <120>; + gpmc,cs-wr-off-ns = <120>; + + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <120>; + gpmc,adv-wr-off-ns = <120>; + + gpmc,we-on-ns = <6>; + gpmc,we-off-ns = <90>; + + gpmc,oe-on-ns = <6>; + gpmc,oe-off-ns = <90>; + + gpmc,page-burst-access-ns = <6>; + gpmc,access-ns = <72>; + gpmc,cycle2cycle-delay-ns = <60>; + + gpmc,rd-cycle-ns = <120>; + gpmc,wr-cycle-ns = <120>; + gpmc,wr-access-ns = <186>; + gpmc,wr-data-mux-bus-ns = <90>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "xloader"; + reg = <0 0x80000>; + }; + partition@0x80000 { + label = "uboot"; + reg = <0x80000 0x1e0000>; + }; + partition@0x260000 { + label = "uboot environment"; + reg = <0x260000 0x40000>; + }; + partition@0x2a0000 { + label = "linux"; + reg = <0x2a0000 0x400000>; + }; + partition@0x6a0000 { + label = "rootfs"; + reg = <0x6a0000 0x1f880000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi index 9a4a3ab9af78..d9e92b654f85 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi @@ -50,7 +50,8 @@ #include "omap-gpmc-smsc911x.dtsi" &gpmc { - ranges = <5 0 0x2c000000 0x01000000>; + ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */ + <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */ smsc1: ethernet@gpmc { compatible = "smsc,lan9221", "smsc,lan9115"; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 655d6e920a86..fb3a69604ed5 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -83,6 +83,41 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; }; + + tv0: connector@1 { + compatible = "svideo-connector"; + label = "tv"; + + port { + tv_connector_in: endpoint { + remote-endpoint = <&opa_out>; + }; + }; + }; + + tv_amp: opa362 { + compatible = "ti,opa362"; + enable-gpios = <&gpio1 23 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + opa_in: endpoint@0 { + remote-endpoint = <&venc_out>; + }; + }; + + port@1 { + reg = <1>; + opa_out: endpoint@0 { + remote-endpoint = <&tv_connector_in>; + }; + }; + }; + }; }; &omap3_pmx_core { @@ -202,11 +237,18 @@ reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; - }; - twl_audio: audio { - compatible = "ti,twl4030-audio"; - codec { + twl_audio: audio { + compatible = "ti,twl4030-audio"; + ti,enable-vibra = <1>; + codec { + ti,ramp_delay_value = <3>; + }; + }; + + twl_power: power { + compatible = "ti,twl4030-power"; + ti,use_poweroff; }; }; }; @@ -222,15 +264,23 @@ compatible = "bosch,bmp085"; reg = <0x77>; interrupt-parent = <&gpio4>; - interrupts = <17 IRQ_TYPE_EDGE_RISING>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */ }; /* accelerometer */ bma180@41 { compatible = "bosch,bma180"; reg = <0x41>; - interrupt-parent = <&gpio3>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpio4>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */ + }; + + /* gyroscope */ + itg3200@68 { + compatible = "invensense,itg3200"; + reg = <0x68>; + interrupt-parent = <&gpio2>; + interrupts = <24 0>; /* GPIO_56 */ }; /* leds */ @@ -281,7 +331,7 @@ compatible = "ti,tsc2007"; reg = <0x48>; interrupt-parent = <&gpio6>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = <600>; }; @@ -320,12 +370,17 @@ vmmc-supply = <&vaux4>; bus-width = <4>; ti,non-removable; + cap-power-off-card; }; &mmc3 { status = "disabled"; }; +&twl_keypad { + status = "disabled"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; @@ -342,8 +397,8 @@ }; &charger { - bb_uvolt = <3200000>; - bb_uamp = <150>; + ti,bb-uvolt = <3200000>; + ti,bb-uamp = <150>; }; /* spare */ @@ -377,16 +432,12 @@ regulator-max-microvolt = <3150000>; }; -/* Needed to power the DPI pins */ -&vpll2 { - regulator-always-on; -}; - &dss { pinctrl-names = "default"; pinctrl-0 = < &dss_dpi_pins >; status = "okay"; + vdds_dsi-supply = <&vpll2>; port { dpi_out: endpoint { @@ -396,6 +447,20 @@ }; }; +&venc { + status = "okay"; + + vdda-supply = <&vdac>; + + port { + venc_out: endpoint { + remote-endpoint = <&opa_in>; + ti,channels = <2>; + ti,invert-polarity; + }; + }; +}; + &gpmc { ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ @@ -449,3 +514,7 @@ }; }; }; + +&mcbsp2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index b550c41b46f1..db80f9d376fa 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -16,6 +16,13 @@ model = "Nokia N900"; compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3"; + aliases { + i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + }; + cpus { cpu@0 { cpu0-supply = <&vcc>; @@ -307,7 +314,7 @@ regulator-name = "V28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; /* due battery cover sensor */ + regulator-always-on; /* due to battery cover sensor */ }; &vaux2 { @@ -365,7 +372,6 @@ regulator-name = "VIO"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - }; &vintana1 { @@ -705,7 +711,7 @@ compatible = "smsc,lan91c94"; interrupt-parent = <&gpio2>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ - reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */ + reg = <1 0 0xf>; /* 16 byte IO range */ bank-width = <2>; pinctrl-names = "default"; pinctrl-0 = <ðernet_pins>; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 1e49dfe7e212..c41db94ee9c2 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -60,6 +60,11 @@ &twl { compatible = "ti,twl5031"; + + twl_power: power { + compatible = "ti,twl4030-power"; + ti,use_poweroff; + }; }; &twl_gpio { diff --git a/arch/arm/boot/dts/omap3-sbc-t3517.dts b/arch/arm/boot/dts/omap3-sbc-t3517.dts index 17986536c61f..c2d5c28a1a70 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3517.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3517.dts @@ -69,3 +69,7 @@ }; }; +&gpmc { + ranges = <4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */ + <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */ +}; diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/omap3-sbc-t3530.dts index c994f0f7e38a..834bc786cd12 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3530.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3530.dts @@ -26,14 +26,10 @@ }; }; -/* - * The following ranges correspond to SMSC9x eth chips on CM-T3530 CoM and - * SB-T35 baseboard respectively. - * This setting includes both chips in SBC-T3530 board device tree. - */ &gpmc { - ranges = <5 0 0x2c000000 0x01000000>, - <4 0 0x2d000000 0x01000000>; + ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */ + <4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */ + <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */ }; &mmc1 { diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts index 5bdddf29341d..73c7bf4a4a08 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3730.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts @@ -27,8 +27,9 @@ }; &gpmc { - ranges = <5 0 0x2c000000 0x01000000>, - <4 0 0x2d000000 0x01000000>; + ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */ + <4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */ + <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */ }; &dss { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 01b71111bd55..f4f78c40b564 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -155,8 +155,8 @@ <14>, <15>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <96>; + dma-channels = <32>; + dma-requests = <96>; }; omap3_pmx_core: pinmux@48002030 { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 074147cebae4..87401d9f4d8b 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -223,8 +223,8 @@ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <127>; + dma-channels = <32>; + dma-requests = <127>; }; gpio1: gpio@4a310000 { diff --git a/arch/arm/boot/dts/omap5-core-thermal.dtsi b/arch/arm/boot/dts/omap5-core-thermal.dtsi index 19212ac6eef0..de8a3d456cf7 100644 --- a/arch/arm/boot/dts/omap5-core-thermal.dtsi +++ b/arch/arm/boot/dts/omap5-core-thermal.dtsi @@ -13,7 +13,7 @@ core_thermal: core_thermal { polling-delay-passive = <250>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ /* sensor ID */ thermal-sensors = <&bandgap 2>; diff --git a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi index 1b87aca88b77..bc3090f2e84b 100644 --- a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi +++ b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi @@ -13,7 +13,7 @@ gpu_thermal: gpu_thermal { polling-delay-passive = <250>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ /* sensor ID */ thermal-sensors = <&bandgap 1>; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index b321fdf42c9f..4a485b63a141 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -238,8 +238,8 @@ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <127>; + dma-channels = <32>; + dma-requests = <127>; }; gpio1: gpio@4ae10000 { @@ -929,8 +929,8 @@ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_sata>; - clocks = <&sys_clkin>; - clock-names = "sysclk"; + clocks = <&sys_clkin>, <&sata_ref_clk>; + clock-names = "sysclk", "refclk"; #phy-cells = <0>; }; }; @@ -1079,4 +1079,8 @@ }; }; +&cpu_thermal { + polling-delay = <500>; /* milliseconds */ +}; + /include/ "omap54xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index 58c27466f012..83b425fb3ac2 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -167,10 +167,18 @@ ti,index-starts-at-one; }; + dpll_core_byp_mux: dpll_core_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x012c>; + }; + dpll_core_ck: dpll_core_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; - clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin>, <&dpll_core_byp_mux>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; @@ -294,10 +302,18 @@ clock-div = <1>; }; + dpll_iva_byp_mux: dpll_iva_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x01ac>; + }; + dpll_iva_ck: dpll_iva_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>; + clocks = <&sys_clkin>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; }; @@ -599,10 +615,19 @@ }; }; &cm_core_clocks { + + dpll_per_byp_mux: dpll_per_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x014c>; + }; + dpll_per_ck: dpll_per_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>; + clocks = <&sys_clkin>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; @@ -714,10 +739,18 @@ ti,index-starts-at-one; }; + dpll_usb_byp_mux: dpll_usb_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x018c>; + }; + dpll_usb_ck: dpll_usb_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; - clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>; + clocks = <&sys_clkin>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index b396c8311b27..e641001ca2a7 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -1,4 +1,5 @@ #include "qcom-apq8064-v2.0.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Qualcomm APQ8064/IFC6410"; @@ -12,6 +13,14 @@ function = "gsbi1"; }; }; + + card_detect: card_detect { + mux { + pins = "gpio26"; + function = "gpio"; + bias-disable; + }; + }; }; gsbi@12440000 { @@ -49,6 +58,9 @@ /* External micro SD card */ sdcc3: sdcc@12180000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&card_detect>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; }; /* WLAN */ sdcc4: sdcc@121c0000 { diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 63b2146f563b..cb225dafe97c 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -74,7 +74,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 32 0x4>; + interrupts = <0 16 0x4>; }; intc: interrupt-controller@2000000 { diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index 1518c5bcca33..a9da7a89fc4b 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -45,7 +45,7 @@ }; &mtu2 { - status = "ok"; + status = "okay"; }; &i2c2 { diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts index 84e05f713c54..b3d8f844b57a 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts @@ -67,7 +67,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0 0 0x80000000>; + ranges = <0 0 0 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index ce085fa444a1..0d50bef01234 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -10,14 +10,20 @@ /dts-v1/; #include "r8a73a4.dtsi" -#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "APE6EVM"; compatible = "renesas,ape6evm", "renesas,r8a73a4"; + aliases { + serial0 = &scifa0; + }; + chosen { bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; + stdout-path = &scifa0; }; memory@40000000 { @@ -30,7 +36,35 @@ reg = <2 0x00000000 0 0x40000000>; }; - ape6evm_fixed_3v3: fixedregulator@0 { + vcc_mmc0: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "MMC0 Vcc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + vcc_sdhi0: regulator@1 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pfc 76 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + /* Common 1.8V and 3.3V rails, used by several devices on APE6EVM */ + ape6evm_fixed_1v8: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ape6evm_fixed_3v3: regulator@3 { compatible = "regulator-fixed"; regulator-name = "3V3"; regulator-min-microvolt = <3300000>; @@ -39,11 +73,13 @@ }; lbsc { + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0 0 0x20000000>; ethernet@8000000 { - compatible = "smsc,lan9118", "smsc,lan9115"; + compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0x08000000 0x1000>; interrupt-parent = <&irqc1>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; @@ -52,7 +88,75 @@ smsc,irq-active-high; smsc,irq-push-pull; vdd33a-supply = <&ape6evm_fixed_3v3>; - vddvario-supply = <&ape6evm_fixed_3v3>; + vddvario-supply = <&ape6evm_fixed_1v8>; + }; + }; + + leds { + compatible = "gpio-leds"; + led1 { + gpios = <&pfc 28 GPIO_ACTIVE_LOW>; + label = "GNSS_EN"; + }; + led2 { + gpios = <&pfc 126 GPIO_ACTIVE_LOW>; + label = "NFC_NRST"; + }; + led3 { + gpios = <&pfc 132 GPIO_ACTIVE_LOW>; + label = "GNSS_NRST"; + }; + led4 { + gpios = <&pfc 232 GPIO_ACTIVE_LOW>; + label = "BT_WAKEUP"; + }; + led5 { + gpios = <&pfc 250 GPIO_ACTIVE_LOW>; + label = "STROBE"; + }; + led6 { + gpios = <&pfc 288 GPIO_ACTIVE_LOW>; + label = "BBRESETOUT"; + }; + }; + + keyboard { + compatible = "gpio-keys"; + + zero-key { + gpios = <&pfc 324 GPIO_ACTIVE_LOW>; + linux,code = <KEY_0>; + label = "S16"; + }; + + menu-key { + gpios = <&pfc 325 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + label = "S17"; + }; + + home-key { + gpios = <&pfc 326 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + label = "S18"; + }; + + back-key { + gpios = <&pfc 327 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + label = "S19"; + }; + + volup-key { + gpios = <&pfc 328 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + label = "S20"; + }; + + voldown-key { + gpios = <&pfc 329 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + label = "S21"; }; }; }; @@ -79,3 +183,64 @@ >; voltage-tolerance = <1>; /* 1% */ }; + +&cmt1 { + status = "okay"; +}; + +&pfc { + scifa0_pins: serial0 { + renesas,groups = "scifa0_data"; + renesas,function = "scifa0"; + }; + + mmc0_pins: mmc { + renesas,groups = "mmc0_data8", "mmc0_ctrl"; + renesas,function = "mmc0"; + }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; + renesas,function = "sdhi0"; + }; + + sdhi1_pins: sd1 { + renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; + renesas,function = "sdhi1"; + }; +}; + +&mmcif0 { + vmmc-supply = <&vcc_mmc0>; + bus-width = <8>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + status = "okay"; +}; + +&scifa0 { + pinctrl-0 = <&scifa0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi0 { + vmmc-supply = <&vcc_sdhi0>; + bus-width = <4>; + toshiba,mmc-wrprotect-disable; + pinctrl-names = "default"; + pinctrl-0 = <&sdhi0_pins>; + status = "okay"; +}; + +&sdhi1 { + vmmc-supply = <&ape6evm_fixed_3v3>; + bus-width = <4>; + broken-cd; + toshiba,mmc-wrprotect-disable; + pinctrl-names = "default"; + pinctrl-0 = <&sdhi1_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 5ac57babc3b9..38136d9f6d95 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -38,6 +38,16 @@ <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; + dbsc1: memory-controller@e6790000 { + compatible = "renesas,dbsc-r8a73a4"; + reg = <0 0xe6790000 0 0x10000>; + }; + + dbsc2: memory-controller@e67a0000 { + compatible = "renesas,dbsc-r8a73a4"; + reg = <0 0xe67a0000 0 0x10000>; + }; + dmac: dma-multiplexer { compatible = "renesas,shdma-mux"; #dma-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index d4af4d86c6b0..9bd0cb439f44 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -172,7 +172,7 @@ pinctrl-names = "default"; phy-handle = <&phy0>; - status = "ok"; + status = "okay"; phy0: ethernet-phy@0 { reg = <0>; @@ -193,7 +193,7 @@ }; &cmt1 { - status = "ok"; + status = "okay"; }; &i2c0 { diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index a8a674bafa67..8a092605d641 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -25,6 +25,7 @@ device_type = "cpu"; reg = <0x0>; clock-frequency = <800000000>; + power-domains = <&pd_a3sm>; }; }; @@ -36,17 +37,29 @@ <0xc2000000 0x1000>; }; + dbsc3: memory-controller@fe400000 { + compatible = "renesas,dbsc3-r8a7740"; + reg = <0xfe400000 0x400>; + power-domains = <&pd_a4s>; + }; + pmu { compatible = "arm,cortex-a9-pmu"; interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; }; + ptm { + compatible = "arm,coresight-etm3x"; + power-domains = <&pd_d4>; + }; + cmt1: timer@e6138000 { compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48"; reg = <0xe6138000 0x170>; interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_CMT1>; clock-names = "fck"; + power-domains = <&pd_c5>; renesas,channels-mask = <0x3f>; @@ -72,6 +85,7 @@ 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; + power-domains = <&pd_a4s>; }; /* irqpin1: IRQ8 - IRQ15 */ @@ -93,6 +107,7 @@ 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; + power-domains = <&pd_a4s>; }; /* irqpin2: IRQ16 - IRQ23 */ @@ -114,6 +129,7 @@ 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; + power-domains = <&pd_a4s>; }; /* irqpin3: IRQ24 - IRQ31 */ @@ -135,6 +151,7 @@ 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; + power-domains = <&pd_a4s>; }; ether: ethernet@e9a00000 { @@ -143,6 +160,7 @@ <0xe9a01800 0x800>; interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_GETHER>; + power-domains = <&pd_a4s>; phy-mode = "mii"; #address-cells = <1>; #size-cells = <0>; @@ -159,6 +177,7 @@ 0 203 IRQ_TYPE_LEVEL_HIGH 0 204 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7740_CLK_IIC0>; + power-domains = <&pd_a4r>; status = "disabled"; }; @@ -172,6 +191,7 @@ 0 72 IRQ_TYPE_LEVEL_HIGH 0 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_IIC1>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -181,6 +201,7 @@ interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -190,6 +211,7 @@ interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -199,6 +221,7 @@ interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -208,6 +231,7 @@ interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -217,6 +241,7 @@ interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -226,6 +251,7 @@ interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -235,6 +261,7 @@ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -244,6 +271,7 @@ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -253,6 +281,7 @@ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_SCIFB>; clock-names = "sci_ick"; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -271,12 +300,14 @@ <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>, <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>, <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>; + power-domains = <&pd_c5>; }; tpu: pwm@e6600000 { compatible = "renesas,tpu-r8a7740", "renesas,tpu"; reg = <0xe6600000 0x100>; clocks = <&mstp3_clks R8A7740_CLK_TPU0>; + power-domains = <&pd_a3sp>; status = "disabled"; #pwm-cells = <3>; }; @@ -287,6 +318,7 @@ interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH 0 57 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_MMC>; + power-domains = <&pd_a3sp>; status = "disabled"; }; @@ -297,6 +329,7 @@ 0 118 IRQ_TYPE_LEVEL_HIGH 0 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_SDHI0>; + power-domains = <&pd_a3sp>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -309,6 +342,7 @@ 0 122 IRQ_TYPE_LEVEL_HIGH 0 123 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_SDHI1>; + power-domains = <&pd_a3sp>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -321,6 +355,7 @@ 0 126 IRQ_TYPE_LEVEL_HIGH 0 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7740_CLK_SDHI2>; + power-domains = <&pd_a3sp>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -332,6 +367,7 @@ reg = <0xfe1f0000 0x400>; interrupts = <0 9 0x4>; clocks = <&mstp3_clks R8A7740_CLK_FSI>; + power-domains = <&pd_a4mp>; status = "disabled"; }; @@ -343,6 +379,7 @@ <0 200 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7740_CLK_TMU0>; clock-names = "fck"; + power-domains = <&pd_a4r>; #renesas,channels = <3>; @@ -357,6 +394,7 @@ <0 172 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7740_CLK_TMU1>; clock-names = "fck"; + power-domains = <&pd_a4r>; #renesas,channels = <3>; @@ -453,7 +491,7 @@ reg = <0xe6150080 4>; clocks = <&sub_clk>, <&sub_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7740_CLK_SUBCK R8A7740_CLK_SUBCK2 >; clock-output-names = @@ -468,7 +506,7 @@ <&cpg_clocks R8A7740_CLK_HPP>, <&sub_clk>, <&cpg_clocks R8A7740_CLK_B>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7740_CLK_CEU21 R8A7740_CLK_CEU20 R8A7740_CLK_TMU0 R8A7740_CLK_LCDC1 R8A7740_CLK_IIC0 R8A7740_CLK_TMU1 R8A7740_CLK_LCDC0 @@ -489,7 +527,7 @@ <&sub_clk>, <&sub_clk>, <&sub_clk>, <&sub_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7740_CLK_SCIFA6 R8A7740_CLK_INTCA R8A7740_CLK_SCIFA7 R8A7740_CLK_DMAC1 R8A7740_CLK_DMAC2 @@ -518,7 +556,7 @@ <&cpg_clocks R8A7740_CLK_HP>, <&cpg_clocks R8A7740_CLK_HP>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7740_CLK_CMT1 R8A7740_CLK_FSI R8A7740_CLK_IIC1 R8A7740_CLK_USBF R8A7740_CLK_SDHI0 R8A7740_CLK_SDHI1 R8A7740_CLK_MMC R8A7740_CLK_GETHER R8A7740_CLK_TPU0 @@ -535,7 +573,7 @@ <&cpg_clocks R8A7740_CLK_HP>, <&cpg_clocks R8A7740_CLK_HP>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7740_CLK_USBH R8A7740_CLK_SDHI2 R8A7740_CLK_USBFUNC R8A7740_CLK_USBPHY >; @@ -543,4 +581,71 @@ "usbhost", "sdhi2", "usbfunc", "usphy"; }; }; + + sysc: system-controller@e6180000 { + compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile"; + reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>; + + pm-domains { + pd_c5: c5 { + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a4lc: a4lc@1 { + reg = <1>; + #power-domain-cells = <0>; + }; + + pd_a4mp: a4mp@2 { + reg = <2>; + #power-domain-cells = <0>; + }; + + pd_d4: d4@3 { + reg = <3>; + #power-domain-cells = <0>; + }; + + pd_a4r: a4r@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a3rv: a3rv@6 { + reg = <6>; + #power-domain-cells = <0>; + }; + }; + + pd_a4s: a4s@10 { + reg = <10>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a3sp: a3sp@11 { + reg = <11>; + #power-domain-cells = <0>; + }; + + pd_a3sm: a3sm@12 { + reg = <12>; + #power-domain-cells = <0>; + }; + + pd_a3sg: a3sg@13 { + reg = <13>; + #power-domain-cells = <0>; + }; + }; + + pd_a4su: a4su@20 { + reg = <20>; + #power-domain-cells = <0>; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index ede9a29e4bc6..5c2219b9f3eb 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -12,6 +12,7 @@ /include/ "skeleton.dtsi" #include <dt-bindings/clock/r8a7779-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -62,6 +63,14 @@ <0xf0000100 0x100>; }; + timer@f0000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xf0000600 0x20>; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg_clocks R8A7779_CLK_ZS>; + }; + gpio0: gpio@ffc40000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; @@ -200,7 +209,7 @@ compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe40000 0x100>; interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg_clocks R8A7779_CLK_P>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF0>; clock-names = "sci_ick"; status = "disabled"; }; @@ -209,7 +218,7 @@ compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe41000 0x100>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg_clocks R8A7779_CLK_P>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF1>; clock-names = "sci_ick"; status = "disabled"; }; @@ -218,7 +227,7 @@ compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe42000 0x100>; interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg_clocks R8A7779_CLK_P>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF2>; clock-names = "sci_ick"; status = "disabled"; }; @@ -227,7 +236,7 @@ compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe43000 0x100>; interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg_clocks R8A7779_CLK_P>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF3>; clock-names = "sci_ick"; status = "disabled"; }; @@ -236,7 +245,7 @@ compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe44000 0x100>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg_clocks R8A7779_CLK_P>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF4>; clock-names = "sci_ick"; status = "disabled"; }; @@ -245,7 +254,7 @@ compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe45000 0x100>; interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg_clocks R8A7779_CLK_P>; + clocks = <&mstp0_clks R8A7779_CLK_SCIF5>; clock-names = "sci_ick"; status = "disabled"; }; @@ -464,18 +473,18 @@ <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_S>, <&cpg_clocks R8A7779_CLK_S>, - <&cpg_clocks R8A7779_CLK_S1>, - <&cpg_clocks R8A7779_CLK_S1>, - <&cpg_clocks R8A7779_CLK_S1>, - <&cpg_clocks R8A7779_CLK_S1>, - <&cpg_clocks R8A7779_CLK_S1>, - <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7779_CLK_HSPI R8A7779_CLK_TMU2 R8A7779_CLK_TMU1 R8A7779_CLK_TMU0 R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0 @@ -506,7 +515,7 @@ <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_S>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7779_CLK_USB01 R8A7779_CLK_USB2 R8A7779_CLK_DU R8A7779_CLK_VIN2 R8A7779_CLK_VIN1 R8A7779_CLK_VIN0 @@ -527,7 +536,7 @@ clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7779_CLK_SDHI3 R8A7779_CLK_SDHI2 R8A7779_CLK_SDHI1 R8A7779_CLK_SDHI0 R8A7779_CLK_MMC1 R8A7779_CLK_MMC0 diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 636d53bb87a2..0c3b6783b72a 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -47,12 +47,12 @@ compatible = "renesas,lager", "renesas,r8a7790"; aliases { - serial6 = &scifa0; - serial7 = &scifa1; + serial0 = &scifa0; + serial1 = &scifa1; }; chosen { - bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = &scifa0; }; @@ -355,7 +355,7 @@ phy-handle = <&phy1>; renesas,ether-link-active-low; - status = "ok"; + status = "okay"; phy1: ethernet-phy@1 { reg = <1>; @@ -366,7 +366,7 @@ }; &cmt0 { - status = "ok"; + status = "okay"; }; &mmcif1 { @@ -397,6 +397,8 @@ spi-max-frequency = <30000000>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; + spi-cpha; + spi-cpol; m25p,fast-read; partition@0 { @@ -470,17 +472,17 @@ }; &iic0 { - status = "ok"; + status = "okay"; }; &iic1 { - status = "ok"; + status = "okay"; pinctrl-0 = <&iic1_pins>; pinctrl-names = "default"; }; &iic2 { - status = "ok"; + status = "okay"; pinctrl-0 = <&iic2_pins>; pinctrl-names = "default"; @@ -562,7 +564,7 @@ pinctrl-0 = <&vin1_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; port { #address-cells = <1>; @@ -579,6 +581,7 @@ pinctrl-0 = <&sound_pins &sound_clk_pins>; pinctrl-names = "default"; + /* Single DAI */ #sound-dai-cells = <0>; status = "okay"; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index af7e255f629e..4b38fc920114 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1054,7 +1054,7 @@ reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; clocks = <&mp_clk>; #clock-cells = <1>; - renesas,clock-indices = <R8A7790_CLK_MSIOF0>; + clock-indices = <R8A7790_CLK_MSIOF0>; clock-output-names = "msiof0"; }; mstp1_clks: mstp1_clks@e6150134 { @@ -1065,7 +1065,7 @@ <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7790_CLK_VCP1 R8A7790_CLK_VCP0 R8A7790_CLK_VPC1 R8A7790_CLK_VPC0 R8A7790_CLK_JPU R8A7790_CLK_SSP1 R8A7790_CLK_TMU1 R8A7790_CLK_3DG R8A7790_CLK_2DDMAC @@ -1087,7 +1087,7 @@ <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0 R8A7790_CLK_MSIOF2 R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1 R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2 @@ -1106,7 +1106,7 @@ <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0 R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1 @@ -1123,8 +1123,10 @@ reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>; #clock-cells = <1>; - renesas,clock-indices = <R8A7790_CLK_AUDIO_DMAC0 R8A7790_CLK_AUDIO_DMAC1 - R8A7790_CLK_THERMAL R8A7790_CLK_PWM>; + clock-indices = < + R8A7790_CLK_AUDIO_DMAC0 R8A7790_CLK_AUDIO_DMAC1 + R8A7790_CLK_THERMAL R8A7790_CLK_PWM + >; clock-output-names = "audmac0", "audmac1", "thermal", "pwm"; }; mstp7_clks: mstp7_clks@e615014c { @@ -1134,7 +1136,7 @@ <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7790_CLK_EHCI R8A7790_CLK_HSUSB R8A7790_CLK_HSCIF1 R8A7790_CLK_HSCIF0 R8A7790_CLK_SCIF1 R8A7790_CLK_SCIF0 R8A7790_CLK_DU2 R8A7790_CLK_DU1 R8A7790_CLK_DU0 @@ -1147,16 +1149,17 @@ mstp8_clks: mstp8_clks@e6150990 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; - clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>, - <&zs_clk>, <&zs_clk>; + clocks = <&hp_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, + <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; - renesas,clock-indices = < - R8A7790_CLK_VIN3 R8A7790_CLK_VIN2 R8A7790_CLK_VIN1 - R8A7790_CLK_VIN0 R8A7790_CLK_ETHER R8A7790_CLK_SATA1 - R8A7790_CLK_SATA0 + clock-indices = < + R8A7790_CLK_MLB R8A7790_CLK_VIN3 R8A7790_CLK_VIN2 + R8A7790_CLK_VIN1 R8A7790_CLK_VIN0 R8A7790_CLK_ETHER + R8A7790_CLK_SATA1 R8A7790_CLK_SATA0 >; clock-output-names = - "vin3", "vin2", "vin1", "vin0", "ether", "sata1", "sata0"; + "mlb", "vin3", "vin2", "vin1", "vin0", "ether", + "sata1", "sata0"; }; mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -1166,7 +1169,7 @@ <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7790_CLK_GPIO5 R8A7790_CLK_GPIO4 R8A7790_CLK_GPIO3 R8A7790_CLK_GPIO2 R8A7790_CLK_GPIO1 R8A7790_CLK_GPIO0 R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD R8A7790_CLK_IICDVFS @@ -1397,8 +1400,13 @@ }; rcar_sound: rcar_sound@ec500000 { - #sound-dai-cells = <1>; - compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2", "renesas,rcar_sound"; + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2"; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ @@ -1432,16 +1440,16 @@ }; rcar_sound,src { - src0: src@0 { }; - src1: src@1 { }; - src2: src@2 { }; - src3: src@3 { }; - src4: src@4 { }; - src5: src@5 { }; - src6: src@6 { }; - src7: src@7 { }; - src8: src@8 { }; - src9: src@9 { }; + src0: src@0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; }; + src1: src@1 { interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; }; + src2: src@2 { interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; }; + src3: src@3 { interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; }; + src4: src@4 { interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; }; + src5: src@5 { interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; }; + src6: src@6 { interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; }; + src7: src@7 { interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; }; + src8: src@8 { interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; }; + src9: src@9 { interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; }; }; rcar_sound,ssi { diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index 740e38678032..d2ebf11f9881 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -156,7 +156,7 @@ phy-handle = <&phy1>; renesas,ether-link-active-low; - status = "ok"; + status = "okay"; phy1: ethernet-phy@1 { reg = <1>; @@ -293,7 +293,7 @@ /* composite video input */ &vin0 { - status = "ok"; + status = "okay"; pinctrl-0 = <&vin0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 990af167c551..a3c27807f6c5 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -48,8 +48,8 @@ compatible = "renesas,koelsch", "renesas,r8a7791"; aliases { - serial6 = &scif0; - serial7 = &scif1; + serial0 = &scif0; + serial1 = &scif1; }; chosen { @@ -366,7 +366,7 @@ phy-handle = <&phy1>; renesas,ether-link-active-low; - status = "ok"; + status = "okay"; phy1: ethernet-phy@1 { reg = <1>; @@ -377,7 +377,7 @@ }; &cmt0 { - status = "ok"; + status = "okay"; }; &sata0 { @@ -444,6 +444,8 @@ spi-max-frequency = <30000000>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; + spi-cpha; + spi-cpol; m25p,fast-read; partition@0 { @@ -452,13 +454,13 @@ read-only; }; partition@80000 { - label = "bootenv"; - reg = <0x00080000 0x00080000>; + label = "user"; + reg = <0x00080000 0x00580000>; read-only; }; - partition@100000 { - label = "data"; - reg = <0x00100000 0x03f00000>; + partition@600000 { + label = "flash"; + reg = <0x00600000 0x03a00000>; }; }; }; @@ -563,7 +565,7 @@ /* composite video input */ &vin1 { - status = "ok"; + status = "okay"; pinctrl-0 = <&vin1_pins>; pinctrl-names = "default"; @@ -582,6 +584,7 @@ pinctrl-0 = <&sound_pins &sound_clk_pins>; pinctrl-names = "default"; + /* Single DAI */ #sound-dai-cells = <0>; status = "okay"; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 77c0beeb8d7c..e35812a0d8d4 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -78,7 +78,7 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; }; gpio0: gpio@e6050000 { @@ -186,10 +186,10 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; cmt0: timer@ffca0000 { @@ -1062,7 +1062,7 @@ reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; clocks = <&mp_clk>; #clock-cells = <1>; - renesas,clock-indices = <R8A7791_CLK_MSIOF0>; + clock-indices = <R8A7791_CLK_MSIOF0>; clock-output-names = "msiof0"; }; mstp1_clks: mstp1_clks@e6150134 { @@ -1073,7 +1073,7 @@ <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7791_CLK_VCP0 R8A7791_CLK_VPC0 R8A7791_CLK_JPU R8A7791_CLK_SSP1 R8A7791_CLK_TMU1 R8A7791_CLK_3DG R8A7791_CLK_2DDMAC R8A7791_CLK_FDP1_1 R8A7791_CLK_FDP1_0 @@ -1093,7 +1093,7 @@ <&mp_clk>, <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7791_CLK_SCIFA2 R8A7791_CLK_SCIFA1 R8A7791_CLK_SCIFA0 R8A7791_CLK_MSIOF2 R8A7791_CLK_SCIFB0 R8A7791_CLK_SCIFB1 R8A7791_CLK_MSIOF1 R8A7791_CLK_SCIFB2 @@ -1111,7 +1111,7 @@ <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0 R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_PCIEC R8A7791_CLK_IIC1 R8A7791_CLK_SSUSB R8A7791_CLK_CMT1 @@ -1127,8 +1127,10 @@ reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>; #clock-cells = <1>; - renesas,clock-indices = <R8A7791_CLK_AUDIO_DMAC0 R8A7791_CLK_AUDIO_DMAC1 - R8A7791_CLK_THERMAL R8A7791_CLK_PWM>; + clock-indices = < + R8A7791_CLK_AUDIO_DMAC0 R8A7791_CLK_AUDIO_DMAC1 + R8A7791_CLK_THERMAL R8A7791_CLK_PWM + >; clock-output-names = "audmac0", "audmac1", "thermal", "pwm"; }; mstp7_clks: mstp7_clks@e615014c { @@ -1138,7 +1140,7 @@ <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7791_CLK_EHCI R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5 R8A7791_CLK_SCIF4 R8A7791_CLK_HSCIF1 R8A7791_CLK_HSCIF0 R8A7791_CLK_SCIF3 R8A7791_CLK_SCIF2 R8A7791_CLK_SCIF1 @@ -1152,15 +1154,17 @@ mstp8_clks: mstp8_clks@e6150990 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; - clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>, <&zs_clk>, - <&zs_clk>; + clocks = <&zg_clk>, <&hp_clk>, <&zg_clk>, <&zg_clk>, + <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < + R8A7791_CLK_IPMMU_SGX R8A7791_CLK_MLB R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0 R8A7791_CLK_ETHER R8A7791_CLK_SATA1 R8A7791_CLK_SATA0 >; clock-output-names = - "vin2", "vin1", "vin0", "ether", "sata1", "sata0"; + "ipmmu_sgx", "mlb", "vin2", "vin1", "vin0", "ether", + "sata1", "sata0"; }; mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -1171,7 +1175,7 @@ <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5 R8A7791_CLK_GPIO4 R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1 R8A7791_CLK_GPIO0 R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5 @@ -1221,7 +1225,7 @@ reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>; clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7791_CLK_SCIFA3 R8A7791_CLK_SCIFA4 R8A7791_CLK_SCIFA5 >; clock-output-names = "scifa3", "scifa4", "scifa5"; @@ -1381,8 +1385,13 @@ }; rcar_sound: rcar_sound@ec500000 { - #sound-dai-cells = <1>; - compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2", "renesas,rcar_sound"; + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2"; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ @@ -1416,16 +1425,16 @@ }; rcar_sound,src { - src0: src@0 { }; - src1: src@1 { }; - src2: src@2 { }; - src3: src@3 { }; - src4: src@4 { }; - src5: src@5 { }; - src6: src@6 { }; - src7: src@7 { }; - src8: src@8 { }; - src9: src@9 { }; + src0: src@0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; }; + src1: src@1 { interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; }; + src2: src@2 { interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; }; + src3: src@3 { interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; }; + src4: src@4 { interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; }; + src5: src@5 { interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; }; + src6: src@6 { interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; }; + src7: src@7 { interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; }; + src8: src@8 { interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; }; + src9: src@9 { interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; }; }; rcar_sound,ssi { diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index f2cf7576bf3f..0d848e605071 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -40,9 +40,9 @@ }; &cmt0 { - status = "ok"; + status = "okay"; }; &scif2 { - status = "ok"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 19c9de3f2a5a..8f78da5ef10b 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -47,7 +47,7 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; }; cmt0: timer@ffca0000 { @@ -84,10 +84,10 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; irqc0: interrupt-controller@e61c0000 { @@ -293,6 +293,28 @@ clock-output-names = "main", "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "z"; }; + /* Variable factor clocks */ + sd1_clk: sd2_clk@e6150078 { + compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150078 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sd1"; + }; + sd2_clk: sd3_clk@e615007c { + compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe615007c 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sd2"; + }; + mmc0_clk: mmc0_clk@e6150240 { + compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150240 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "mmc0"; + }; /* Fixed factor clocks */ pll1_div2_clk: pll1_div2_clk { @@ -455,7 +477,7 @@ reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; clocks = <&mp_clk>; #clock-cells = <1>; - renesas,clock-indices = <R8A7794_CLK_MSIOF0>; + clock-indices = <R8A7794_CLK_MSIOF0>; clock-output-names = "msiof0"; }; mstp1_clks: mstp1_clks@e6150134 { @@ -465,7 +487,7 @@ <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7794_CLK_VCP0 R8A7794_CLK_VPC0 R8A7794_CLK_TMU1 R8A7794_CLK_3DG R8A7794_CLK_2DDMAC R8A7794_CLK_FDP1_0 R8A7794_CLK_TMU3 R8A7794_CLK_TMU2 R8A7794_CLK_CMT0 @@ -479,41 +501,51 @@ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, - <&mp_clk>, <&mp_clk>, <&mp_clk>; + <&mp_clk>, <&mp_clk>, <&mp_clk>, + <&zs_clk>, <&zs_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7794_CLK_SCIFA2 R8A7794_CLK_SCIFA1 R8A7794_CLK_SCIFA0 R8A7794_CLK_MSIOF2 R8A7794_CLK_SCIFB0 R8A7794_CLK_SCIFB1 R8A7794_CLK_MSIOF1 R8A7794_CLK_SCIFB2 + R8A7794_CLK_SYS_DMAC1 R8A7794_CLK_SYS_DMAC0 >; clock-output-names = "scifa2", "scifa1", "scifa0", "msiof2", "scifb0", - "scifb1", "msiof1", "scifb2"; + "scifb1", "msiof1", "scifb2", + "sys-dmac1", "sys-dmac0"; }; mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&rclk_clk>; + clocks = <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7794_CLK_SD0>, + <&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; - renesas,clock-indices = < - R8A7794_CLK_CMT1 + clock-indices = < + R8A7794_CLK_SDHI2 R8A7794_CLK_SDHI1 R8A7794_CLK_SDHI0 + R8A7794_CLK_MMCIF0 R8A7794_CLK_CMT1 + R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1 >; clock-output-names = - "cmt1"; + "sdhi2", "sdhi1", "sdhi0", + "mmcif0", "cmt1", "usbdmac0", "usbdmac1"; }; mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, + clocks = <&mp_clk>, <&mp_clk>, + <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < + R8A7794_CLK_EHCI R8A7794_CLK_HSUSB R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5 R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0 R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1 R8A7794_CLK_SCIF0 >; clock-output-names = + "ehci", "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0", "scif3", "scif2", "scif1", "scif0"; }; @@ -522,18 +554,32 @@ reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; clocks = <&zg_clk>, <&zg_clk>, <&p_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7794_CLK_VIN1 R8A7794_CLK_VIN0 R8A7794_CLK_ETHER >; clock-output-names = "vin1", "vin0", "ether"; }; + mstp9_clks: mstp9_clks@e6150994 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; + clocks = <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>, + <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; + #clock-cells = <1>; + clock-indices = < + R8A7794_CLK_QSPI_MOD R8A7794_CLK_I2C5 R8A7794_CLK_I2C4 + R8A7794_CLK_I2C3 R8A7794_CLK_I2C2 R8A7794_CLK_I2C1 + R8A7794_CLK_I2C0 + >; + clock-output-names = + "qspi_mod", "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0"; + }; mstp11_clks: mstp11_clks@e615099c { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>; clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>; #clock-cells = <1>; - renesas,clock-indices = < + clock-indices = < R8A7794_CLK_SCIFA3 R8A7794_CLK_SCIFA4 R8A7794_CLK_SCIFA5 >; clock-output-names = "scifa3", "scifa4", "scifa5"; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts new file mode 100644 index 000000000000..3ac151102c2f --- /dev/null +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -0,0 +1,468 @@ +/* + * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3066a.dtsi" + +/ { + model = "Rayeager PX2"; + compatible = "chipspark,rayeager-px2", "rockchip,rk3066a"; + + memory { + reg = <0x60000000 0x40000000>; + }; + + ir: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio6 1 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + gpio-key,wakeup = <1>; + gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <116>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + }; + }; + + vsys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* input for 5V_STDBY is VSYS or DC5V, selectable by jumper J4 */ + vcc_stdby: 5v-stdby-regulator { + compatible = "regulator-fixed"; + regulator-name = "5v_stdby"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_emmc: emmc-regulator { + compatible = "regulator-fixed"; + regulator-name = "emmc_vccq"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + vin-supply = <&vsys>; + }; + + vcc_sata: sata-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sata_pwr>; + regulator-name = "usb_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_stdby>; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + + vcc_host: usb-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_drv>; + regulator-name = "host-pwr"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_stdby>; + }; + + vcc_otg: usb-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_drv>; + regulator-name = "vcc_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_stdby>; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_arm>; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>; + phy = <&phy0>; + phy-supply = <&vcc_rmii>; + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&emmc { + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>; + vmmc-supply = <&vcc_emmc>; + vqmmc-supply = <&vcc_emmc>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + ak8963: ak8963@0d { + compatible = "asahi-kasei,ak8975"; + reg = <0x0d>; + interrupt-parent = <&gpio4>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&comp_int>; + }; + + mma8452: mma8452@1d { + compatible = "fsl,mma8452"; + reg = <0x1d>; + interrupt-parent = <&gpio4>; + interrupts = <16 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&gsensor_int>; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + tps: tps@2d { + reg = <0x2d>; + interrupt-parent = <&gpio6>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>, <&pwr_hold>; + + vcc1-supply = <&vsys>; + vcc2-supply = <&vsys>; + vcc3-supply = <&vsys>; + vcc4-supply = <&vsys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_io>; + vcc7-supply = <&vsys>; + vccio-supply = <&vsys>; + + regulators { + vcc_rtc: regulator@0 { + regulator-name = "vcc_rtc"; + regulator-always-on; + }; + + vcc_io: regulator@1 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_arm: regulator@2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_ddr: regulator@3 { + regulator-name = "vcc_ddr"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc18: regulator@5 { + regulator-name = "vcc18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_11: regulator@6 { + regulator-name = "vdd_11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vcc_25: regulator@7 { + regulator-name = "vcc_25"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vccio_wl: regulator@8 { + regulator-name = "vccio_wl"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc25_hdmi: regulator@9 { + regulator-name = "vcc25_hdmi"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + vcca_33: regulator@10 { + regulator-name = "vcca_33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_rmii: regulator@11 { + regulator-name = "vcc_rmii"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc28_cif: regulator@12 { + regulator-name = "vcc28_cif"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; + }; +}; + +#include "tps65910.dtsi" + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&mmc0 { + bus-width = <4>; + disable-wp; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; + vmmc-supply = <&vcc_sd>; + status = "okay"; +}; + +&mmc1 { + broken-cd; + bus-width = <4>; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>; + vmmc-supply = <&vccio_wl>; + status = "okay"; +}; + +&pinctrl { + pcfg_output_high: pcfg-output-high { + output-high; + }; + + ak8963 { + comp_int: comp-int { + rockchip,pins = <4 17 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + emac { + rmii_rst: rmii-rst { + rockchip,pins = <1 30 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + ir { + ir_int: ir-int { + rockchip,pins = <6 1 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + keys { + pwr_key: pwr-key { + rockchip,pins = <6 2 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + mma8452 { + gsensor_int: gsensor-int { + rockchip,pins = <4 16 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + mmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <3 7 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + usb_host { + host_drv: host-drv { + rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_default>; + }; + + hub_rst: hub-rst { + rockchip,pins = <1 31 RK_FUNC_GPIO &pcfg_output_high>; + }; + + sata_pwr: sata-pwr { + rockchip,pins = <4 22 RK_FUNC_GPIO &pcfg_pull_default>; + }; + + sata_reset: sata-reset { + rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + usb_otg { + otg_drv: otg-drv { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + tps { + pmic_int: pmic-int { + rockchip,pins = <6 4 RK_FUNC_GPIO &pcfg_pull_default>; + }; + + pwr_hold: pwr-hold { + rockchip,pins = <6 8 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_25>; + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_xfer>, <&uart3_cts>, <&uart3_rts>; + status = "okay"; +}; + +&usb_host { + pinctrl-names = "default"; + pinctrl-0 = <&hub_rst>, <&sata_reset>; + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index a76dd44adb53..d7b8bbc0c25f 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -17,7 +17,34 @@ compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288"; }; +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + &i2c0 { + clock-frequency = <400000>; + + vdd_cpu: syr827@40 { + compatible = "silergy,syr827"; + fcs,suspend-voltage-selector = <1>; + reg = <0x40>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_gpu: syr828@41 { + compatible = "silergy,syr828"; + fcs,suspend-voltage-selector = <1>; + reg = <0x41>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + hym8563@51 { compatible = "haoyu,hym8563"; reg = <0x51>; diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index d8c775e6d5fe..a1c294bf7fed 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -15,6 +15,13 @@ / { compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288"; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + #clock-cells = <0>; + }; }; &cpu0 { @@ -23,7 +30,6 @@ &i2c0 { clock-frequency = <400000>; - status = "okay"; rk808: pmic@1b { compatible = "rockchip,rk808"; @@ -31,7 +37,7 @@ interrupt-parent = <&gpio0>; interrupts = <4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; + pinctrl-0 = <&pmic_int &global_pwroff>; rockchip,system-power-controller; wakeup-source; #clock-cells = <1>; @@ -50,6 +56,9 @@ regulator-min-microvolt = <750000>; regulator-max-microvolt = <1350000>; regulator-name = "vdd_arm"; + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_gpu: DCDC_REG2 { @@ -58,12 +67,19 @@ regulator-min-microvolt = <850000>; regulator-max-microvolt = <1250000>; regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; }; vcc_ddr: DCDC_REG3 { regulator-always-on; regulator-boot-on; regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; }; vcc_io: DCDC_REG4 { @@ -72,6 +88,10 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc_io"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; }; vccio_pmu: LDO_REG1 { @@ -80,6 +100,10 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vccio_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; }; vcc_tp: LDO_REG2 { @@ -88,6 +112,9 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc_tp"; + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_10: LDO_REG3 { @@ -96,6 +123,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-name = "vdd_10"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; }; vcc18_lcd: LDO_REG4 { @@ -104,6 +135,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcc18_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; }; vccio_sd: LDO_REG5 { @@ -112,6 +147,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; }; vdd10_lcd: LDO_REG6 { @@ -120,6 +159,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-name = "vdd10_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; }; vcc_18: LDO_REG7 { @@ -128,6 +171,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcc_18"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; }; vcca_codec: LDO_REG8 { @@ -136,19 +183,45 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcca_codec"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; }; vcc_wl: SWITCH_REG1 { regulator-always-on; regulator-boot-on; regulator-name = "vcc_wl"; + regulator-state-mem { + regulator-on-in-suspend; + }; }; vcc_lcd: SWITCH_REG2 { regulator-always-on; regulator-boot-on; regulator-name = "vcc_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + }; }; }; }; }; + +&gmac { + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + clock_in_out = "input"; + snps,reset-gpio = <&gpio4 7 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 6194d673e80b..5e895a514a0b 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -90,6 +90,19 @@ regulator-always-on; regulator-boot-on; }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <ð_phy_pwr>; + regulator-name = "vcc_phy"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; }; &emmc { @@ -104,6 +117,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c5>; + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; @@ -120,6 +138,10 @@ status = "okay"; }; +&i2c5 { + status = "okay"; +}; + &wdt { status = "okay"; }; @@ -208,6 +230,12 @@ rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + eth_phy { + eth_phy_pwr: eth-phy-pwr { + rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &usb_host0_ehci { @@ -217,3 +245,19 @@ &usb_host1 { status = "okay"; }; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts b/arch/arm/boot/dts/rk3288-firefly-beta.dts new file mode 100644 index 000000000000..75d77e38e0d6 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-firefly-beta.dts @@ -0,0 +1,71 @@ +/* + * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3288-firefly.dtsi" + +/ { + model = "Firefly-RK3288 Beta"; + compatible = "firefly,firefly-rk3288-beta", "rockchip,rk3288"; +}; + +&ir { + gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; +}; + +&pinctrl { + act8846 { + pmic_vsel: pmic-vsel { + rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + ir { + ir_int: ir-int { + rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-firefly.dts b/arch/arm/boot/dts/rk3288-firefly.dts new file mode 100644 index 000000000000..c07fe92dc69f --- /dev/null +++ b/arch/arm/boot/dts/rk3288-firefly.dts @@ -0,0 +1,71 @@ +/* + * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3288-firefly.dtsi" + +/ { + model = "Firefly-RK3288"; + compatible = "firefly,firefly-rk3288", "rockchip,rk3288"; +}; + +&ir { + gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; +}; + +&pinctrl { + act8846 { + pmic_vsel: pmic-vsel { + rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + ir { + ir_int: ir-int { + rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi new file mode 100644 index 000000000000..e6f873abbe0d --- /dev/null +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -0,0 +1,490 @@ +/* + * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "rk3288.dtsi" + +/ { + memory { + reg = <0 0x80000000>; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; + + ir: ir-receiver { + compatible = "gpio-ir-receiver"; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + gpio-key,wakeup = <1>; + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <116>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + }; + }; + + leds { + compatible = "gpio-leds"; + + work { + gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; + label = "firefly:blue:user"; + linux,default-trigger = "rc-feedback"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led>; + }; + + power { + gpios = <&gpio8 2 GPIO_ACTIVE_LOW>; + label = "firefly:green:power"; + linux,default-trigger = "default-on"; + pinctrl-names = "default"; + pinctrl-0 = <&power_led>; + }; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + + vcc_flash: flash-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_flash"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_io>; + }; + + vcc_5v: usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + vcc_host_5v: usb-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_5v>; + }; + + vcc_otg_5v: usb-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-name = "vcc_otg_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_5v>; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&emmc { + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_flash>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + vdd_cpu: syr827@40 { + compatible = "silergy,syr827"; + fcs,suspend-voltage-selector = <1>; + reg = <0x40>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + vdd_gpu: syr828@41 { + compatible = "silergy,syr828"; + fcs,suspend-voltage-selector = <1>; + reg = <0x41>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + interrupt-parent = <&gpio7>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int>; + }; + + act8846: act8846@5a { + compatible = "active-semi,act8846"; + reg = <0x5a>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_vsel>, <&pwr_hold>; + system-power-controller; + + regulators { + vcc_ddr: REG1 { + regulator-name = "vcc_ddr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_io: REG2 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_log: REG3 { + regulator-name = "vdd_log"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vcc_20: REG4 { + regulator-name = "vcc_20"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + vccio_sd: REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd10_lcd: REG6 { + regulator-name = "vdd10_lcd"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcca_18: REG7 { + regulator-name = "vcca_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcca_33: REG8 { + regulator-name = "vcca_33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_lan: REG9 { + regulator-name = "vcc_lan"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_10: REG10 { + regulator-name = "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcc_18: REG11 { + regulator-name = "vcc_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc18_lcd: REG12 { + regulator-name = "vcc18_lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&pinctrl { + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + act8846 { + pwr_hold: pwr-hold { + rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + gmac { + phy_int: phy-int { + rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_pmeb: phy-pmeb { + rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_rst: phy-rst { + rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + hym8563 { + rtc_int: rtc-int { + rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + keys { + pwr_key: pwr-key { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + power_led: power-led { + rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + work_led: work-led { + rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb_host { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usbhub_rst: usbhub-rst { + rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + usb_otg { + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&vcc_18>; + status = "okay"; +}; + +&sdio0 { + broken-cd; + bus-width = <4>; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>; + vmmc-supply = <&vcc_18>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; + vmmc-supply = <&vcc_sd>; + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk>, <&spi0_cs0>, <&spi0_tx>, <&spi0_rx>, <&spi0_cs1>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>; + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usb_host1 { + pinctrl-names = "default"; + pinctrl-0 = <&usbhub_rst>; + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index fd19f00784bd..d771f687a13b 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -149,8 +149,22 @@ clock-frequency = <24000000>; }; + timer: timer@ff810000 { + compatible = "rockchip,rk3288-timer"; + reg = <0xff810000 0x20>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&xin24m>, <&cru PCLK_TIMER>; + clock-names = "timer", "pclk"; + }; + + display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vopl_out>, <&vopb_out>; + }; + sdmmc: dwmmc@ff0c0000 { compatible = "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 150000000>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; clock-names = "biu", "ciu"; fifo-depth = <0x100>; @@ -161,6 +175,7 @@ sdio0: dwmmc@ff0d0000 { compatible = "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 150000000>; clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>; clock-names = "biu", "ciu"; fifo-depth = <0x100>; @@ -171,6 +186,7 @@ sdio1: dwmmc@ff0e0000 { compatible = "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 150000000>; clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>; clock-names = "biu", "ciu"; fifo-depth = <0x100>; @@ -181,6 +197,7 @@ emmc: dwmmc@ff0f0000 { compatible = "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 150000000>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; clock-names = "biu", "ciu"; fifo-depth = <0x100>; @@ -380,6 +397,22 @@ status = "disabled"; }; + gmac: ethernet@ff290000 { + compatible = "rockchip,rk3288-gmac"; + reg = <0xff290000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + rockchip,grf = <&grf>; + clocks = <&cru SCLK_MAC>, + <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>, + <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>, + <&cru ACLK_GMAC>, <&cru PCLK_GMAC>; + clock-names = "stmmaceth", + "mac_clk_rx", "mac_clk_tx", + "clk_mac_ref", "clk_mac_refout", + "aclk_mac", "pclk_mac"; + }; + usb_host0_ehci: usb@ff500000 { compatible = "generic-ehci"; reg = <0xff500000 0x100>; @@ -502,6 +535,11 @@ }; }; + sram@ff720000 { + compatible = "rockchip,rk3288-pmu-sram", "mmio-sram"; + reg = <0xff720000 0x1000>; + }; + pmu: power-management@ff730000 { compatible = "rockchip,rk3288-pmu", "syscon"; reg = <0xff730000 0x100>; @@ -538,6 +576,7 @@ wdt: watchdog@ff800000 { compatible = "rockchip,rk3288-wdt", "snps,dw-wdt"; reg = <0xff800000 0x100>; + clocks = <&cru PCLK_WDT>; interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -557,6 +596,28 @@ status = "disabled"; }; + vopb: vop@ff930000 { + compatible = "rockchip,rk3288-vop"; + reg = <0xff930000 0x19c>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>; + reset-names = "axi", "ahb", "dclk"; + iommus = <&vopb_mmu>; + status = "disabled"; + + vopb_out: port { + #address-cells = <1>; + #size-cells = <0>; + + vopb_out_hdmi: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_in_vopb>; + }; + }; + }; + vopb_mmu: iommu@ff930300 { compatible = "rockchip,iommu"; reg = <0xff930300 0x100>; @@ -566,6 +627,28 @@ status = "disabled"; }; + vopl: vop@ff940000 { + compatible = "rockchip,rk3288-vop"; + reg = <0xff940000 0x19c>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>; + reset-names = "axi", "ahb", "dclk"; + iommus = <&vopl_mmu>; + status = "disabled"; + + vopl_out: port { + #address-cells = <1>; + #size-cells = <0>; + + vopl_out_hdmi: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_in_vopl>; + }; + }; + }; + vopl_mmu: iommu@ff940300 { compatible = "rockchip,iommu"; reg = <0xff940300 0x100>; @@ -575,6 +658,32 @@ status = "disabled"; }; + hdmi: hdmi@ff980000 { + compatible = "rockchip,rk3288-dw-hdmi"; + reg = <0xff980000 0x20000>; + reg-io-width = <4>; + rockchip,grf = <&grf>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; + clock-names = "iahb", "isfr"; + status = "disabled"; + + ports { + hdmi_in: port { + #address-cells = <1>; + #size-cells = <0>; + hdmi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_hdmi>; + }; + hdmi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_hdmi>; + }; + }; + }; + }; + gic: interrupt-controller@ffc01000 { compatible = "arm,gic-400"; interrupt-controller; @@ -725,6 +834,29 @@ bias-disable; }; + pcfg_pull_none_12ma: pcfg-pull-none-12ma { + bias-disable; + drive-strength = <12>; + }; + + sleep { + global_pwroff: global-pwroff { + rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>; + }; + + ddrio_pwroff: ddrio-pwroff { + rockchip,pins = <0 1 RK_FUNC_1 &pcfg_pull_none>; + }; + + ddr0_retention: ddr0-retention { + rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_up>; + }; + + ddr1_retention: ddr1-retention { + rockchip,pins = <0 3 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>, @@ -1068,5 +1200,38 @@ rockchip,pins = <7 23 3 &pcfg_pull_none>; }; }; + + gmac { + rgmii_pins: rgmii-pins { + rockchip,pins = <3 30 3 &pcfg_pull_none>, + <3 31 3 &pcfg_pull_none>, + <3 26 3 &pcfg_pull_none>, + <3 27 3 &pcfg_pull_none>, + <3 28 3 &pcfg_pull_none_12ma>, + <3 29 3 &pcfg_pull_none_12ma>, + <3 24 3 &pcfg_pull_none_12ma>, + <3 25 3 &pcfg_pull_none_12ma>, + <4 0 3 &pcfg_pull_none>, + <4 5 3 &pcfg_pull_none>, + <4 6 3 &pcfg_pull_none>, + <4 9 3 &pcfg_pull_none_12ma>, + <4 4 3 &pcfg_pull_none_12ma>, + <4 1 3 &pcfg_pull_none>, + <4 3 3 &pcfg_pull_none>; + }; + + rmii_pins: rmii-pins { + rockchip,pins = <3 30 3 &pcfg_pull_none>, + <3 31 3 &pcfg_pull_none>, + <3 28 3 &pcfg_pull_none>, + <3 29 3 &pcfg_pull_none>, + <4 0 3 &pcfg_pull_none>, + <4 5 3 &pcfg_pull_none>, + <4 4 3 &pcfg_pull_none>, + <4 1 3 &pcfg_pull_none>, + <4 2 3 &pcfg_pull_none>, + <4 3 3 &pcfg_pull_none>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts index aa31b84a707a..f00cea7aca2f 100644 --- a/arch/arm/boot/dts/s5pv210-aquila.dts +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -355,6 +355,7 @@ &hsotg { vusb_a-supply = <&ldo3_reg>; vusb_d-supply = <&ldo8_reg>; + dr_mode = "peripheral"; status = "okay"; }; diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts index 6387c77a6f7b..a3d4643b202e 100644 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -333,6 +333,7 @@ &hsotg { vusb_a-supply = <&ldo3_reg>; vusb_d-supply = <&ldo8_reg>; + dr_mode = "peripheral"; status = "okay"; }; diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts index cb8521899ec8..da7d210df670 100644 --- a/arch/arm/boot/dts/s5pv210-smdkv210.dts +++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts @@ -181,6 +181,7 @@ }; &hsotg { + dr_mode = "peripheral"; status = "okay"; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 5f4144d1e3a1..367af53c1b84 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -78,6 +78,11 @@ }; }; + sram: sram@00300000 { + compatible = "mmio-sram"; + reg = <0x00300000 0x20000>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -214,7 +219,20 @@ compatible = "atmel,at91sam9g45-isi"; reg = <0xf0034000 0x4000>; interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_isi_data_0_7>; + clocks = <&isi_clk>; + clock-names = "isi_clk"; status = "disabled"; + port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + sfr: sfr@f0038000 { + compatible = "atmel,sama5d3-sfr", "syscon"; + reg = <0xf0038000 0x60>; }; mmc1: mmc@f8000000 { @@ -545,7 +563,7 @@ }; isi { - pinctrl_isi: isi-0 { + pinctrl_isi_data_0_7: isi-0-data-0-7 { atmel,pins = <AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */ AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */ @@ -557,13 +575,19 @@ AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */ AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC30 periph C ISI_PCK, conflicts with UTXD0 */ AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */ - AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */ - AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */ + AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */ + }; + + pinctrl_isi_data_8_9: isi-0-data-8-9 { + atmel,pins = + <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */ AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */ }; - pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 { + + pinctrl_isi_data_10_11: isi-0-data-10-11 { atmel,pins = - <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD31 periph B ISI_MCK */ + <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC27 periph C ISI_PD10, conflicts with SPI1_NPCS2, TWCK1 */ + AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */ }; }; @@ -1224,7 +1248,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; @@ -1392,7 +1415,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ehci_clk", "uhpck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index cfcd200b0c17..7d6babdab039 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -122,6 +122,7 @@ d2 { label = "d2"; gpios = <&pioE 25 GPIO_ACTIVE_LOW>; /* PE25, conflicts with A25, RXD2 */ + linux,default-trigger = "heartbeat"; }; }; }; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 77e03655aca3..83bee7a3a617 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -45,13 +45,36 @@ */ i2c0: i2c@f0014000 { wm8904: wm8904@1a { - compatible = "wm8904"; + compatible = "wlf,wm8904"; reg = <0x1a>; clocks = <&pck0>; clock-names = "mclk"; }; }; + i2c1: i2c@f0018000 { + ov2640: camera@0x30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; + resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; + /* use pck1 for the master clock of ov2640 */ + clocks = <&pck1>; + clock-names = "xvclk"; + assigned-clocks = <&pck1>; + assigned-clock-rates = <25000000>; + + port { + ov2640_0: endpoint { + remote-endpoint = <&isi_0>; + bus-width = <8>; + }; + }; + }; + }; + usart1: serial@f0020000 { dmas = <0>, <0>; /* Do not use DMA for usart1 */ pinctrl-names = "default"; @@ -60,8 +83,12 @@ }; isi: isi@f0034000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_isi &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>; + port { + isi_0: endpoint { + remote-endpoint = <&ov2640_0>; + bus-width = <8>; + }; + }; }; mmc1: mmc@f8000000 { @@ -117,12 +144,17 @@ <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD30 periph B */ }; - pinctrl_isi_reset: isi_reset-0 { + pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 { + atmel,pins = + <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD31 periph B ISI_MCK */ + }; + + pinctrl_sensor_reset: sensor_reset-0 { atmel,pins = <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE24 gpio */ }; - pinctrl_isi_power: isi_power-0 { + pinctrl_sensor_power: sensor_power-0 { atmel,pins = <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */ }; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index b94995d1889f..4303874889c6 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -62,9 +62,11 @@ gpio0 = &pioA; gpio1 = &pioB; gpio2 = &pioC; + gpio3 = &pioD; gpio4 = &pioE; tcb0 = &tcb0; tcb1 = &tcb1; + i2c0 = &i2c0; i2c2 = &i2c2; }; cpus { @@ -103,6 +105,11 @@ }; }; + ns_sram: sram@00210000 { + compatible = "mmio-sram"; + reg = <0x00210000 0x10000>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -253,7 +260,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00600000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; clock-names = "usb_clk", "ehci_clk", "uhpck"; status = "disabled"; }; @@ -267,7 +274,7 @@ }; nand0: nand@80000000 { - compatible = "atmel,at91rm9200-nand"; + compatible = "atmel,sama5d4-nand", "atmel,at91rm9200-nand"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -455,8 +462,8 @@ lcdck: lcdck { #clock-cells = <0>; - reg = <4>; - clocks = <&smd>; + reg = <3>; + clocks = <&mck>; }; smdck: smdck { @@ -764,7 +771,7 @@ reg = <50>; }; - lcd_clk: lcd_clk { + lcdc_clk: lcdc_clk { #clock-cells = <0>; reg = <51>; }; @@ -870,6 +877,11 @@ status = "disabled"; }; + sfr: sfr@f8028000 { + compatible = "atmel,sama5d4-sfr", "syscon"; + reg = <0xf8028000 0x60>; + }; + mmc1: mmc@fc000000 { compatible = "atmel,hsmci"; reg = <0xfc000000 0x600>; @@ -1111,6 +1123,18 @@ clocks = <&pioC_clk>; }; + pioD: gpio@fc068000 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfc068000 0x100>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pioD_clk>; + status = "disabled"; + }; + pioE: gpio@fc06d000 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfc06d000 0x100>; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index 939be1299ca6..6d32c87632d4 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -179,7 +179,11 @@ }; &cmt1 { - status = "ok"; + status = "okay"; +}; + +&extal2_clk { + clock-frequency = <48000000>; }; &i2c0 { diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index d8def5a529da..2dfd5b44255d 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -10,6 +10,7 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/clock/sh73a0-clock.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -42,6 +43,22 @@ <0xf0000100 0x100>; }; + sbsc2: memory-controller@fb400000 { + compatible = "renesas,sbsc-sh73a0"; + reg = <0xfb400000 0x400>; + interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>, + <0 38 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sec", "temp"; + }; + + sbsc1: memory-controller@fe400000 { + compatible = "renesas,sbsc-sh73a0"; + reg = <0xfe400000 0x400>; + interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>, + <0 36 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sec", "temp"; + }; + pmu { compatible = "arm,cortex-a9-pmu"; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>, @@ -55,6 +72,8 @@ renesas,channels-mask = <0x3f>; + clocks = <&mstp3_clks SH73A0_CLK_CMT1>; + clock-names = "fck"; status = "disabled"; }; @@ -144,6 +163,7 @@ 0 168 IRQ_TYPE_LEVEL_HIGH 0 169 IRQ_TYPE_LEVEL_HIGH 0 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks SH73A0_CLK_IIC0>; status = "disabled"; }; @@ -156,6 +176,7 @@ 0 52 IRQ_TYPE_LEVEL_HIGH 0 53 IRQ_TYPE_LEVEL_HIGH 0 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks SH73A0_CLK_IIC1>; status = "disabled"; }; @@ -168,6 +189,7 @@ 0 172 IRQ_TYPE_LEVEL_HIGH 0 173 IRQ_TYPE_LEVEL_HIGH 0 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks SH73A0_CLK_IIC2>; status = "disabled"; }; @@ -180,6 +202,7 @@ 0 184 IRQ_TYPE_LEVEL_HIGH 0 185 IRQ_TYPE_LEVEL_HIGH 0 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks SH73A0_CLK_IIC3>; status = "disabled"; }; @@ -192,6 +215,7 @@ 0 188 IRQ_TYPE_LEVEL_HIGH 0 189 IRQ_TYPE_LEVEL_HIGH 0 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks SH73A0_CLK_IIC4>; status = "disabled"; }; @@ -200,6 +224,7 @@ reg = <0xe6bd0000 0x100>; interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH 0 141 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>; reg-io-width = <4>; status = "disabled"; }; @@ -210,6 +235,7 @@ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH 0 84 IRQ_TYPE_LEVEL_HIGH 0 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks SH73A0_CLK_SDHI0>; cap-sd-highspeed; status = "disabled"; }; @@ -220,6 +246,7 @@ reg = <0xee120000 0x100>; interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH 0 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks SH73A0_CLK_SDHI1>; toshiba,mmc-wrprotect-disable; cap-sd-highspeed; status = "disabled"; @@ -230,6 +257,7 @@ reg = <0xee140000 0x100>; interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH 0 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks SH73A0_CLK_SDHI2>; toshiba,mmc-wrprotect-disable; cap-sd-highspeed; status = "disabled"; @@ -239,6 +267,8 @@ compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c40000 0x100>; interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks SH73A0_CLK_SCIFA0>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -246,6 +276,8 @@ compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c50000 0x100>; interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks SH73A0_CLK_SCIFA1>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -253,6 +285,8 @@ compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c60000 0x100>; interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks SH73A0_CLK_SCIFA2>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -260,6 +294,8 @@ compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c70000 0x100>; interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks SH73A0_CLK_SCIFA3>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -267,6 +303,8 @@ compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c80000 0x100>; interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -274,6 +312,8 @@ compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cb0000 0x100>; interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks SH73A0_CLK_SCIFA5>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -281,6 +321,8 @@ compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cc0000 0x100>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks SH73A0_CLK_SCIFA6>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -288,6 +330,8 @@ compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cd0000 0x100>; interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks SH73A0_CLK_SCIFA7>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -295,6 +339,8 @@ compatible = "renesas,scifb-sh73a0", "renesas,scifb"; reg = <0xe6c30000 0x100>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks SH73A0_CLK_SCIFB>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -317,9 +363,337 @@ sh_fsi2: sound@ec230000 { #sound-dai-cells = <1>; - compatible = "renesas,sh_fsi2"; + compatible = "renesas,fsi2-sh73a0", "renesas,sh_fsi2"; reg = <0xec230000 0x400>; interrupts = <0 146 0x4>; status = "disabled"; }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* External root clocks */ + extalr_clk: extalr_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "extalr"; + }; + extal1_clk: extal1_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "extal1"; + }; + extal2_clk: extal2_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "extal2"; + }; + extcki_clk: extcki_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "extcki"; + }; + fsiack_clk: fsiack_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "fsiack"; + }; + fsibck_clk: fsibck_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "fsibck"; + }; + + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,sh73a0-cpg-clocks"; + reg = <0xe6150000 0x10000>; + clocks = <&extal1_clk>, <&extal2_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0", "pll1", "pll2", + "pll3", "dsi0phy", "dsi1phy", + "zg", "m3", "b", "m1", "m2", + "z", "zx", "hp"; + }; + + /* Variable factor clocks (DIV6) */ + vclk1_clk: vclk1_clk@e6150008 { + compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150008 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "vclk1"; + }; + vclk2_clk: vclk2_clk@e615000c { + compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe615000c 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "vclk2"; + }; + vclk3_clk: vclk3_clk@e615001c { + compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe615001c 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "vclk3"; + }; + zb_clk: zb_clk@e6150010 { + compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150010 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "zb"; + }; + flctl_clk: flctl_clk@e6150014 { + compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150014 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "flctlck"; + }; + sdhi0_clk: sdhi0_clk@e6150074 { + compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150074 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sdhi0ck"; + }; + sdhi1_clk: sdhi1_clk@e6150078 { + compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150078 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sdhi1ck"; + }; + sdhi2_clk: sdhi2_clk@e615007c { + compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe615007c 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sdhi2ck"; + }; + fsia_clk: fsia_clk@e6150018 { + compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150018 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "fsia"; + }; + fsib_clk: fsib_clk@e6150090 { + compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150090 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "fsib"; + }; + sub_clk: sub_clk@e6150080 { + compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150080 4>; + clocks = <&extal2_clk>; + #clock-cells = <0>; + clock-output-names = "sub"; + }; + spua_clk: spua_clk@e6150084 { + compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150084 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "spua"; + }; + spuv_clk: spuv_clk@e6150094 { + compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150094 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "spuv"; + }; + msu_clk: msu_clk@e6150088 { + compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150088 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "msu"; + }; + hsi_clk: hsi_clk@e615008c { + compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe615008c 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "hsi"; + }; + mfg1_clk: mfg1_clk@e6150098 { + compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150098 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "mfg1"; + }; + mfg2_clk: mfg2_clk@e615009c { + compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe615009c 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "mfg2"; + }; + dsit_clk: dsit_clk@e6150060 { + compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150060 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "dsit"; + }; + dsi0p_clk: dsi0p_clk@e6150064 { + compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock"; + reg = <0xe6150064 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "dsi0pck"; + }; + + /* Fixed factor clocks */ + main_div2_clk: main_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks SH73A0_CLK_MAIN>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "main_div2"; + }; + pll1_div2_clk: pll1_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks SH73A0_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "pll1_div2"; + }; + pll1_div7_clk: pll1_div7_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks SH73A0_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <7>; + clock-mult = <1>; + clock-output-names = "pll1_div7"; + }; + pll1_div13_clk: pll1_div13_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks SH73A0_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <13>; + clock-mult = <1>; + clock-output-names = "pll1_div13"; + }; + twd_clk: twd_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks SH73A0_CLK_Z>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "twd"; + }; + + /* Gate clocks */ + mstp0_clks: mstp0_clks@e6150130 { + compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xe6150130 4>, <0xe6150030 4>; + clocks = <&cpg_clocks SH73A0_CLK_HP>; + #clock-cells = <1>; + clock-indices = < + SH73A0_CLK_IIC2 + >; + clock-output-names = + "iic2"; + }; + mstp1_clks: mstp1_clks@e6150134 { + compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xe6150134 4>, <0xe6150038 4>; + clocks = <&cpg_clocks SH73A0_CLK_B>, + <&cpg_clocks SH73A0_CLK_B>, + <&cpg_clocks SH73A0_CLK_B>, + <&cpg_clocks SH73A0_CLK_B>, + <&sub_clk>, <&cpg_clocks SH73A0_CLK_B>, + <&cpg_clocks SH73A0_CLK_HP>, + <&cpg_clocks SH73A0_CLK_ZG>, + <&cpg_clocks SH73A0_CLK_B>; + #clock-cells = <1>; + clock-indices = < + SH73A0_CLK_CEU1 SH73A0_CLK_CSI2_RX1 + SH73A0_CLK_CEU0 SH73A0_CLK_CSI2_RX0 + SH73A0_CLK_TMU0 SH73A0_CLK_DSITX0 + SH73A0_CLK_IIC0 SH73A0_CLK_SGX + SH73A0_CLK_LCDC0 + >; + clock-output-names = + "ceu1", "csi2_rx1", "ceu0", "csi2_rx0", + "tmu0", "dsitx0", "iic0", "sgx", "lcdc0"; + }; + mstp2_clks: mstp2_clks@e6150138 { + compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xe6150138 4>, <0xe6150040 4>; + clocks = <&sub_clk>, <&cpg_clocks SH73A0_CLK_HP>, + <&cpg_clocks SH73A0_CLK_HP>, <&sub_clk>, + <&sub_clk>, <&sub_clk>, <&sub_clk>, <&sub_clk>, + <&sub_clk>, <&sub_clk>; + #clock-cells = <1>; + clock-indices = < + SH73A0_CLK_SCIFA7 SH73A0_CLK_SY_DMAC + SH73A0_CLK_MP_DMAC SH73A0_CLK_SCIFA5 + SH73A0_CLK_SCIFB SH73A0_CLK_SCIFA0 + SH73A0_CLK_SCIFA1 SH73A0_CLK_SCIFA2 + SH73A0_CLK_SCIFA3 SH73A0_CLK_SCIFA4 + >; + clock-output-names = + "scifa7", "sy_dmac", "mp_dmac", "scifa5", + "scifb", "scifa0", "scifa1", "scifa2", + "scifa3", "scifa4"; + }; + mstp3_clks: mstp3_clks@e615013c { + compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xe615013c 4>, <0xe6150048 4>; + clocks = <&sub_clk>, <&extalr_clk>, + <&cpg_clocks SH73A0_CLK_HP>, <&sub_clk>, + <&cpg_clocks SH73A0_CLK_HP>, + <&cpg_clocks SH73A0_CLK_HP>, <&flctl_clk>, + <&sdhi0_clk>, <&sdhi1_clk>, + <&cpg_clocks SH73A0_CLK_HP>, <&sdhi2_clk>, + <&main_div2_clk>, <&main_div2_clk>, + <&main_div2_clk>, <&main_div2_clk>, + <&main_div2_clk>; + #clock-cells = <1>; + clock-indices = < + SH73A0_CLK_SCIFA6 SH73A0_CLK_CMT1 + SH73A0_CLK_FSI SH73A0_CLK_IRDA + SH73A0_CLK_IIC1 SH73A0_CLK_USB SH73A0_CLK_FLCTL + SH73A0_CLK_SDHI0 SH73A0_CLK_SDHI1 + SH73A0_CLK_MMCIF0 SH73A0_CLK_SDHI2 + SH73A0_CLK_TPU0 SH73A0_CLK_TPU1 + SH73A0_CLK_TPU2 SH73A0_CLK_TPU3 + SH73A0_CLK_TPU4 + >; + clock-output-names = + "scifa6", "cmt1", "fsi", "irda", "iic1", + "usb", "flctl", "sdhi0", "sdhi1", "mmcif0", "sdhi2", + "tpu0", "tpu1", "tpu2", "tpu3", "tpu4"; + }; + mstp4_clks: mstp4_clks@e6150140 { + compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xe6150140 4>, <0xe615004c 4>; + clocks = <&cpg_clocks SH73A0_CLK_HP>, + <&cpg_clocks SH73A0_CLK_HP>, <&extalr_clk>; + #clock-cells = <1>; + clock-indices = < + SH73A0_CLK_IIC3 SH73A0_CLK_IIC4 + SH73A0_CLK_KEYSC + >; + clock-output-names = + "iic3", "iic4", "keysc"; + }; + }; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 252c3d1bda50..9d8760956752 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -713,6 +713,9 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&l4_sp_clk>; + dmas = <&pdma 28>, + <&pdma 29>; + dma-names = "tx", "rx"; }; uart1: serial1@ffc03000 { @@ -722,6 +725,9 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&l4_sp_clk>; + dmas = <&pdma 30>, + <&pdma 31>; + dma-names = "tx", "rx"; }; rst: rstmgr@ffd05000 { diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index a6eb5436d26d..40accc87e3a2 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -117,7 +117,7 @@ chan_priority = <1>; block_size = <0xfff>; dma-masters = <2>; - data_width = <3 3 0 0>; + data_width = <3 3>; }; dma@eb000000 { @@ -133,7 +133,7 @@ chan_allocation_order = <1>; chan_priority = <1>; block_size = <0xfff>; - data_width = <3 3 0 0>; + data_width = <3 3>; }; fsmc: flash@b0000000 { diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts index 261d5e2c48d2..af487145cd89 100644 --- a/arch/arm/boot/dts/stih407-b2120.dts +++ b/arch/arm/boot/dts/stih407-b2120.dts @@ -7,9 +7,8 @@ * published by the Free Software Foundation. */ /dts-v1/; -#include "stih407-clock.dtsi" -#include "stih407-family.dtsi" #include "stihxxx-b2120.dtsi" +#include "stih407.dtsi" / { model = "STiH407 B2120"; compatible = "st,stih407-b2120", "st,stih407"; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 3e31d32133b8..c06a54681912 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -274,5 +274,67 @@ status = "disabled"; }; + + usb2_picophy0: phy1 { + compatible = "st,stih407-usb2-phy"; + #phy-cells = <0>; + st,syscfg = <&syscfg_core 0x100 0xf4>; + resets = <&softreset STIH407_PICOPHY_SOFTRESET>, + <&picophyreset STIH407_PICOPHY0_RESET>; + reset-names = "global", "port"; + }; + + miphy28lp_phy: miphy28lp@9b22000 { + compatible = "st,miphy28lp-phy"; + st,syscfg = <&syscfg_core>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + phy_port0: port@9b22000 { + reg = <0x9b22000 0xff>, + <0x9b09000 0xff>, + <0x9b04000 0xff>; + reg-names = "sata-up", + "pcie-up", + "pipew"; + + st,syscfg = <0x114 0x818 0xe0 0xec>; + #phy-cells = <1>; + + reset-names = "miphy-sw-rst"; + resets = <&softreset STIH407_MIPHY0_SOFTRESET>; + }; + + phy_port1: port@9b2a000 { + reg = <0x9b2a000 0xff>, + <0x9b19000 0xff>, + <0x9b14000 0xff>; + reg-names = "sata-up", + "pcie-up", + "pipew"; + + st,syscfg = <0x118 0x81c 0xe4 0xf0>; + + #phy-cells = <1>; + + reset-names = "miphy-sw-rst"; + resets = <&softreset STIH407_MIPHY1_SOFTRESET>; + }; + + phy_port2: port@8f95000 { + reg = <0x8f95000 0xff>, + <0x8f90000 0xff>; + reg-names = "pipew", + "usb3-up"; + + st,syscfg = <0x11c 0x820>; + + #phy-cells = <1>; + + reset-names = "miphy-sw-rst"; + resets = <&softreset STIH407_MIPHY2_SOFTRESET>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi new file mode 100644 index 000000000000..3efa3b2ebe90 --- /dev/null +++ b/arch/arm/boot/dts/stih407.dtsi @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2015 STMicroelectronics Limited. + * Author: Gabriel Fernandez <gabriel.fernandez@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#include "stih407-clock.dtsi" +#include "stih407-family.dtsi" +/ { + soc { + /* Display */ + vtg_main: sti-vtg-main@8d02800 { + compatible = "st,vtg"; + reg = <0x8d02800 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>; + }; + + vtg_aux: sti-vtg-aux@8d00200 { + compatible = "st,vtg"; + reg = <0x8d00200 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>; + }; + + sti-display-subsystem { + compatible = "st,sti-display-subsystem"; + #address-cells = <1>; + #size-cells = <1>; + + assigned-clocks = <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>, + <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>, + <&clk_s_d2_flexgen CLK_PIX_GDP1>, + <&clk_s_d2_flexgen CLK_PIX_GDP2>, + <&clk_s_d2_flexgen CLK_PIX_GDP3>, + <&clk_s_d2_flexgen CLK_PIX_GDP4>; + + assigned-clock-parents = <0>, + <0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>; + + assigned-clock-rates = <297000000>, <297000000>; + + ranges; + + sti-compositor@9d11000 { + compatible = "st,stih407-compositor"; + reg = <0x9d11000 0x1000>; + + clock-names = "compo_main", + "compo_aux", + "pix_main", + "pix_aux", + "pix_gdp1", + "pix_gdp2", + "pix_gdp3", + "pix_gdp4", + "main_parent", + "aux_parent"; + + clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>, + <&clk_s_c0_flexgen CLK_COMPO_DVP>, + <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>, + <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>, + <&clk_s_d2_flexgen CLK_PIX_GDP1>, + <&clk_s_d2_flexgen CLK_PIX_GDP2>, + <&clk_s_d2_flexgen CLK_PIX_GDP3>, + <&clk_s_d2_flexgen CLK_PIX_GDP4>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>; + + reset-names = "compo-main", "compo-aux"; + resets = <&softreset STIH407_COMPO_SOFTRESET>, + <&softreset STIH407_COMPO_SOFTRESET>; + st,vtg = <&vtg_main>, <&vtg_aux>; + }; + + sti-tvout@8d08000 { + compatible = "st,stih407-tvout"; + reg = <0x8d08000 0x1000>; + reg-names = "tvout-reg"; + reset-names = "tvout"; + resets = <&softreset STIH407_HDTVOUT_SOFTRESET>; + #address-cells = <1>; + #size-cells = <1>; + assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>, + <&clk_s_d2_flexgen CLK_TMDS_HDMI>, + <&clk_s_d2_flexgen CLK_REF_HDMIPHY>, + <&clk_s_d0_flexgen CLK_PCM_0>, + <&clk_s_d2_flexgen CLK_PIX_HDDAC>, + <&clk_s_d2_flexgen CLK_HDDAC>; + + assigned-clock-parents = <&clk_s_d2_quadfs 0>, + <&clk_tmdsout_hdmi>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d0_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>; + ranges; + + sti-hdmi@8d04000 { + compatible = "st,stih407-hdmi"; + reg = <0x8d04000 0x1000>; + reg-names = "hdmi-reg"; + interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>; + interrupt-names = "irq"; + clock-names = "pix", + "tmds", + "phy", + "audio", + "main_parent", + "aux_parent"; + + clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>, + <&clk_s_d2_flexgen CLK_TMDS_HDMI>, + <&clk_s_d2_flexgen CLK_REF_HDMIPHY>, + <&clk_s_d0_flexgen CLK_PCM_0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>; + + hdmi,hpd-gpio = <&pio5 3>; + reset-names = "hdmi"; + resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>; + ddc = <&hdmiddc>; + + }; + + sti-hda@8d02000 { + compatible = "st,stih407-hda"; + reg = <0x8d02000 0x400>, <0x92b0120 0x4>; + reg-names = "hda-reg", "video-dacs-ctrl"; + clock-names = "pix", + "hddac", + "main_parent", + "aux_parent"; + clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>, + <&clk_s_d2_flexgen CLK_HDDAC>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index c05627eb717d..208b5e89036a 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -10,5 +10,213 @@ #include "stih407-family.dtsi" #include "stih410-pinctrl.dtsi" / { + soc { + usb2_picophy1: phy2 { + compatible = "st,stih407-usb2-phy"; + #phy-cells = <0>; + st,syscfg = <&syscfg_core 0xf8 0xf4>; + resets = <&softreset STIH407_PICOPHY_SOFTRESET>, + <&picophyreset STIH407_PICOPHY0_RESET>; + reset-names = "global", "port"; + }; + usb2_picophy2: phy3 { + compatible = "st,stih407-usb2-phy"; + #phy-cells = <0>; + st,syscfg = <&syscfg_core 0xfc 0xf4>; + resets = <&softreset STIH407_PICOPHY_SOFTRESET>, + <&picophyreset STIH407_PICOPHY1_RESET>; + reset-names = "global", "port"; + }; + + ohci0: usb@9a03c00 { + compatible = "st,st-ohci-300x"; + reg = <0x9a03c00 0x100>; + interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, + <&softreset STIH407_USB2_PORT0_SOFTRESET>; + reset-names = "power", "softreset"; + phys = <&usb2_picophy1>; + phy-names = "usb"; + }; + + ehci0: usb@9a03e00 { + compatible = "st,st-ehci-300x"; + reg = <0x9a03e00 0x100>; + interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, + <&softreset STIH407_USB2_PORT0_SOFTRESET>; + reset-names = "power", "softreset"; + phys = <&usb2_picophy1>; + phy-names = "usb"; + }; + + ohci1: usb@9a83c00 { + compatible = "st,st-ohci-300x"; + reg = <0x9a83c00 0x100>; + interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, + <&softreset STIH407_USB2_PORT1_SOFTRESET>; + reset-names = "power", "softreset"; + phys = <&usb2_picophy2>; + phy-names = "usb"; + }; + + ehci1: usb@9a83e00 { + compatible = "st,st-ehci-300x"; + reg = <0x9a83e00 0x100>; + interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, + <&softreset STIH407_USB2_PORT1_SOFTRESET>; + reset-names = "power", "softreset"; + phys = <&usb2_picophy2>; + phy-names = "usb"; + }; + + /* Display */ + vtg_main: sti-vtg-main@8d02800 { + compatible = "st,vtg"; + reg = <0x8d02800 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>; + }; + + vtg_aux: sti-vtg-aux@8d00200 { + compatible = "st,vtg"; + reg = <0x8d00200 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>; + }; + + sti-display-subsystem { + compatible = "st,sti-display-subsystem"; + #address-cells = <1>; + #size-cells = <1>; + + assigned-clocks = <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>, + <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>, + <&clk_s_d2_flexgen CLK_PIX_GDP1>, + <&clk_s_d2_flexgen CLK_PIX_GDP2>, + <&clk_s_d2_flexgen CLK_PIX_GDP3>, + <&clk_s_d2_flexgen CLK_PIX_GDP4>; + + assigned-clock-parents = <0>, + <0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>; + + assigned-clock-rates = <297000000>, <297000000>; + + ranges; + + sti-compositor@9d11000 { + compatible = "st,stih407-compositor"; + reg = <0x9d11000 0x1000>; + + clock-names = "compo_main", + "compo_aux", + "pix_main", + "pix_aux", + "pix_gdp1", + "pix_gdp2", + "pix_gdp3", + "pix_gdp4", + "main_parent", + "aux_parent"; + + clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>, + <&clk_s_c0_flexgen CLK_COMPO_DVP>, + <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>, + <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>, + <&clk_s_d2_flexgen CLK_PIX_GDP1>, + <&clk_s_d2_flexgen CLK_PIX_GDP2>, + <&clk_s_d2_flexgen CLK_PIX_GDP3>, + <&clk_s_d2_flexgen CLK_PIX_GDP4>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>; + + reset-names = "compo-main", "compo-aux"; + resets = <&softreset STIH407_COMPO_SOFTRESET>, + <&softreset STIH407_COMPO_SOFTRESET>; + st,vtg = <&vtg_main>, <&vtg_aux>; + }; + + sti-tvout@8d08000 { + compatible = "st,stih407-tvout"; + reg = <0x8d08000 0x1000>; + reg-names = "tvout-reg"; + reset-names = "tvout"; + resets = <&softreset STIH407_HDTVOUT_SOFTRESET>; + #address-cells = <1>; + #size-cells = <1>; + assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>, + <&clk_s_d2_flexgen CLK_TMDS_HDMI>, + <&clk_s_d2_flexgen CLK_REF_HDMIPHY>, + <&clk_s_d0_flexgen CLK_PCM_0>, + <&clk_s_d2_flexgen CLK_PIX_HDDAC>, + <&clk_s_d2_flexgen CLK_HDDAC>; + + assigned-clock-parents = <&clk_s_d2_quadfs 0>, + <&clk_tmdsout_hdmi>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d0_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>; + ranges; + + sti-hdmi@8d04000 { + compatible = "st,stih407-hdmi"; + reg = <0x8d04000 0x1000>; + reg-names = "hdmi-reg"; + interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>; + interrupt-names = "irq"; + clock-names = "pix", + "tmds", + "phy", + "audio", + "main_parent", + "aux_parent"; + + clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>, + <&clk_s_d2_flexgen CLK_TMDS_HDMI>, + <&clk_s_d2_flexgen CLK_REF_HDMIPHY>, + <&clk_s_d0_flexgen CLK_PCM_0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>; + + hdmi,hpd-gpio = <&pio5 3>; + reset-names = "hdmi"; + resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>; + ddc = <&hdmiddc>; + + }; + + sti-hda@8d02000 { + compatible = "st,stih407-hda"; + reg = <0x8d02000 0x400>, <0x92b0120 0x4>; + reg-names = "hda-reg", "video-dacs-ctrl"; + clock-names = "pix", + "hddac", + "main_parent", + "aux_parent"; + clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>, + <&clk_s_d2_flexgen CLK_HDDAC>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi index 9198c12765ea..19b019b5f30e 100644 --- a/arch/arm/boot/dts/stih415.dtsi +++ b/arch/arm/boot/dts/stih415.dtsi @@ -153,8 +153,8 @@ compatible = "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610"; status = "disabled"; - reg = <0xfe810000 0x8000>, <0x148 0x4>; - reg-names = "stmmaceth", "sti-ethconf"; + reg = <0xfe810000 0x8000>; + reg-names = "stmmaceth"; interrupts = <0 147 0>, <0 148 0>, <0 149 0>; interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; @@ -165,7 +165,7 @@ snps,mixed-burst; snps,force_sf_dma_mode; - st,syscon = <&syscfg_rear>; + st,syscon = <&syscfg_rear 0x148>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii0>; @@ -177,8 +177,8 @@ device_type = "network"; compatible = "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610"; status = "disabled"; - reg = <0xfef08000 0x8000>, <0x74 0x4>; - reg-names = "stmmaceth", "sti-ethconf"; + reg = <0xfef08000 0x8000>; + reg-names = "stmmaceth"; interrupts = <0 150 0>, <0 151 0>, <0 152 0>; interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; @@ -186,7 +186,7 @@ snps,mixed-burst; snps,force_sf_dma_mode; - st,syscon = <&syscfg_sbc>; + st,syscon = <&syscfg_sbc 0x74>; resets = <&softreset STIH415_ETH1_SOFTRESET>; reset-names = "stmmaceth"; diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index fad9073ddeed..ea28ebadab1a 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -163,8 +163,8 @@ device_type = "network"; compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710"; status = "disabled"; - reg = <0xfe810000 0x8000>, <0x8bc 0x4>; - reg-names = "stmmaceth", "sti-ethconf"; + reg = <0xfe810000 0x8000>; + reg-names = "stmmaceth"; interrupts = <0 133 0>, <0 134 0>, <0 135 0>; interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; @@ -172,7 +172,7 @@ snps,pbl = <32>; snps,mixed-burst; - st,syscon = <&syscfg_rear>; + st,syscon = <&syscfg_rear 0x8bc>; resets = <&softreset STIH416_ETH0_SOFTRESET>; reset-names = "stmmaceth"; pinctrl-names = "default"; @@ -185,15 +185,15 @@ device_type = "network"; compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710"; status = "disabled"; - reg = <0xfef08000 0x8000>, <0x7f0 0x4>; - reg-names = "stmmaceth", "sti-ethconf"; + reg = <0xfef08000 0x8000>; + reg-names = "stmmaceth"; interrupts = <0 136 0>, <0 137 0>, <0 138 0>; interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; snps,pbl = <32>; snps,mixed-burst; - st,syscon = <&syscfg_sbc>; + st,syscon = <&syscfg_sbc 0x7f0>; resets = <&softreset STIH416_ETH1_SOFTRESET>; reset-names = "stmmaceth"; @@ -283,21 +283,21 @@ miphy365x_phy: phy@fe382000 { compatible = "st,miphy365x-phy"; - st,syscfg = <&syscfg_rear>; + st,syscfg = <&syscfg_rear 0x824 0x828>; #address-cells = <1>; #size-cells = <1>; ranges; phy_port0: port@fe382000 { #phy-cells = <1>; - reg = <0xfe382000 0x100>, <0xfe394000 0x100>, <0x824 0x4>; - reg-names = "sata", "pcie", "syscfg"; + reg = <0xfe382000 0x100>, <0xfe394000 0x100>; + reg-names = "sata", "pcie"; }; phy_port1: port@fe38a000 { #phy-cells = <1>; - reg = <0xfe38a000 0x100>, <0xfe804000 0x100>, <0x828 0x4>; - reg-names = "sata", "pcie", "syscfg"; + reg = <0xfe38a000 0x100>, <0xfe804000 0x100>; + reg-names = "sata", "pcie"; }; }; diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts new file mode 100644 index 000000000000..926235c08e4d --- /dev/null +++ b/arch/arm/boot/dts/stih418-b2199.dts @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2015 STMicroelectronics (R&D) Limited. + * Author: Maxime Coquelin <maxime.coquelin@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; +#include "stih418.dtsi" +/ { + model = "STiH418 B2199"; + compatible = "st,stih418-b2199", "st,stih418"; + + chosen { + bootargs = "console=ttyAS0,115200 clk_ignore_unused"; + linux,stdout-path = &sbc_serial0; + }; + + memory { + device_type = "memory"; + reg = <0x40000000 0xc0000000>; + }; + + aliases { + ttyAS0 = &sbc_serial0; + }; + + soc { + sbc_serial0: serial@9530000 { + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + red { + #gpio-cells = <2>; + label = "Front Panel LED"; + gpios = <&pio4 1 0>; + linux,default-trigger = "heartbeat"; + }; + green { + #gpio-cells = <2>; + gpios = <&pio1 3 0>; + default-state = "off"; + }; + }; + + i2c@9842000 { + status = "okay"; + }; + + i2c@9843000 { + status = "okay"; + }; + + i2c@9844000 { + status = "okay"; + }; + + i2c@9845000 { + status = "okay"; + }; + + i2c@9540000 { + status = "okay"; + }; + + /* SSC11 to HDMI */ + i2c@9541000 { + status = "okay"; + /* HDMI V1.3a supports Standard mode only */ + clock-frequency = <100000>; + st,i2c-min-scl-pulse-width-us = <0>; + st,i2c-min-sda-pulse-width-us = <5>; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi new file mode 100644 index 000000000000..0ab23daa2829 --- /dev/null +++ b/arch/arm/boot/dts/stih418-clock.dtsi @@ -0,0 +1,348 @@ +/* + * Copyright (C) 2015 STMicroelectronics R&D Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <dt-bindings/clock/stih418-clks.h> +/ { + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + compatible = "st,stih418-clk", "simple-bus"; + + /* + * Fixed 30MHz oscillator inputs to SoC + */ + clk_sysin: clk-sysin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <30000000>; + clock-output-names = "CLK_SYSIN"; + }; + + /* + * ARM Peripheral clock for timers + */ + arm_periph_clk: clk-m-a9-periphs { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a9>; + clock-div = <2>; + clock-mult = <1>; + }; + + /* + * A9 PLL. + */ + clockgen-a9@92b0000 { + compatible = "st,clkgen-c32"; + reg = <0x92b0000 0xffff>; + + clockgen_a9_pll: clockgen-a9-pll { + #clock-cells = <1>; + compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clockgen-a9-pll-odf"; + }; + }; + + /* + * ARM CPU related clocks. + */ + clk_m_a9: clk-m-a9@92b0000 { + #clock-cells = <0>; + compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux"; + reg = <0x92b0000 0x10000>; + + clocks = <&clockgen_a9_pll 0>, + <&clockgen_a9_pll 0>, + <&clk_s_c0_flexgen 13>, + <&clk_m_a9_ext2f_div2>; + }; + + /* + * ARM Peripheral clock for timers + */ + clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + + clocks = <&clk_s_c0_flexgen 13>; + + clock-output-names = "clk-m-a9-ext2f-div2"; + + clock-div = <2>; + clock-mult = <1>; + }; + + /* + * Bootloader initialized system infrastructure clock for + * serial devices. + */ + clk_ext2f_a9: clockgen-c0@13 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + clock-output-names = "clk-s-icn-reg-0"; + }; + + clockgen-a@090ff000 { + compatible = "st,clkgen-c32"; + reg = <0x90ff000 0x1000>; + + clk_s_a0_pll: clk-s-a0-pll { + #clock-cells = <1>; + compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-pll-ofd-0"; + }; + + clk_s_a0_flexgen: clk-s-a0-flexgen { + compatible = "st,flexgen"; + + #clock-cells = <1>; + + clocks = <&clk_s_a0_pll 0>, + <&clk_sysin>; + + clock-output-names = "clk-ic-lmi0", + "clk-ic-lmi1"; + }; + }; + + clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 { + #clock-cells = <1>; + compatible = "st,stih407-quadfs660-C", "st,quadfs"; + reg = <0x9103000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-c0-fs0-ch0", + "clk-s-c0-fs0-ch1", + "clk-s-c0-fs0-ch2", + "clk-s-c0-fs0-ch3"; + }; + + clk_s_c0: clockgen-c@09103000 { + compatible = "st,clkgen-c32"; + reg = <0x9103000 0x1000>; + + clk_s_c0_pll0: clk-s-c0-pll0 { + #clock-cells = <1>; + compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-c0-pll0-odf-0"; + }; + + clk_s_c0_pll1: clk-s-c0-pll1 { + #clock-cells = <1>; + compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-c0-pll1-odf-0"; + }; + + clk_s_c0_flexgen: clk-s-c0-flexgen { + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_c0_pll0 0>, + <&clk_s_c0_pll1 0>, + <&clk_s_c0_quadfs 0>, + <&clk_s_c0_quadfs 1>, + <&clk_s_c0_quadfs 2>, + <&clk_s_c0_quadfs 3>, + <&clk_sysin>; + + clock-output-names = "clk-icn-gpu", + "clk-fdma", + "clk-nand", + "clk-hva", + "clk-proc-stfe", + "clk-tp", + "clk-rx-icn-dmu", + "clk-rx-icn-hva", + "clk-icn-cpu", + "clk-tx-icn-dmu", + "clk-mmc-0", + "clk-mmc-1", + "clk-jpegdec", + "clk-icn-reg", + "clk-proc-bdisp-0", + "clk-proc-bdisp-1", + "clk-pp-dmu", + "clk-vid-dmu", + "clk-dss-lpc", + "clk-st231-aud-0", + "clk-st231-gp-1", + "clk-st231-dmu", + "clk-icn-lmi", + "clk-tx-icn-1", + "clk-icn-sbc", + "clk-stfe-frc2", + "clk-eth-phyref", + "clk-eth-ref-phyclk", + "clk-flash-promip", + "clk-main-disp", + "clk-aux-disp", + "clk-compo-dvp", + "clk-tx-icn-hades", + "clk-rx-icn-hades", + "clk-icn-reg-16", + "clk-pp-hevc", + "clk-clust-hevc", + "clk-hwpe-hevc", + "clk-fc-hevc", + "clk-proc-mixer", + "clk-proc-sc", + "clk-avsp-hevc"; + }; + }; + + clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 { + #clock-cells = <1>; + compatible = "st,stih407-quadfs660-D", "st,quadfs"; + reg = <0x9104000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-d0-fs0-ch0", + "clk-s-d0-fs0-ch1", + "clk-s-d0-fs0-ch2", + "clk-s-d0-fs0-ch3"; + }; + + clockgen-d0@09104000 { + compatible = "st,clkgen-c32"; + reg = <0x9104000 0x1000>; + + clk_s_d0_flexgen: clk-s-d0-flexgen { + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_d0_quadfs 0>, + <&clk_s_d0_quadfs 1>, + <&clk_s_d0_quadfs 2>, + <&clk_s_d0_quadfs 3>, + <&clk_sysin>; + + clock-output-names = "clk-pcm-0", + "clk-pcm-1", + "clk-pcm-2", + "clk-spdiff", + "clk-pcmr10-master", + "clk-usb2-phy"; + }; + }; + + clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 { + #clock-cells = <1>; + compatible = "st,stih407-quadfs660-D", "st,quadfs"; + reg = <0x9106000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-d2-fs0-ch0", + "clk-s-d2-fs0-ch1", + "clk-s-d2-fs0-ch2", + "clk-s-d2-fs0-ch3"; + }; + + clk_tmdsout_hdmi: clk-tmdsout-hdmi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + clockgen-d2@x9106000 { + compatible = "st,clkgen-c32"; + reg = <0x9106000 0x1000>; + + clk_s_d2_flexgen: clk-s-d2-flexgen { + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>, + <&clk_s_d2_quadfs 2>, + <&clk_s_d2_quadfs 3>, + <&clk_sysin>, + <&clk_sysin>, + <&clk_tmdsout_hdmi>; + + clock-output-names = "clk-pix-main-disp", + "", + "", + "", + "", + "clk-tmds-hdmi-div2", + "clk-pix-aux-disp", + "clk-denc", + "clk-pix-hddac", + "clk-hddac", + "clk-sddac", + "clk-pix-dvo", + "clk-dvo", + "clk-pix-hdmi", + "clk-tmds-hdmi", + "clk-ref-hdmiphy", + "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "clk-vp9"; + }; + }; + + clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 { + #clock-cells = <1>; + compatible = "st,stih407-quadfs660-D", "st,quadfs"; + reg = <0x9107000 0x1000>; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-d3-fs0-ch0", + "clk-s-d3-fs0-ch1", + "clk-s-d3-fs0-ch2", + "clk-s-d3-fs0-ch3"; + }; + + clockgen-d3@9107000 { + compatible = "st,clkgen-c32"; + reg = <0x9107000 0x1000>; + + clk_s_d3_flexgen: clk-s-d3-flexgen { + #clock-cells = <1>; + compatible = "st,flexgen"; + + clocks = <&clk_s_d3_quadfs 0>, + <&clk_s_d3_quadfs 1>, + <&clk_s_d3_quadfs 2>, + <&clk_s_d3_quadfs 3>, + <&clk_sysin>; + + clock-output-names = "clk-stfe-frc1", + "clk-tsout-0", + "clk-tsout-1", + "clk-mchi", + "clk-vsens-compo", + "clk-frc1-remote", + "clk-lpc-0", + "clk-lpc-1"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi new file mode 100644 index 000000000000..354d90f521b6 --- /dev/null +++ b/arch/arm/boot/dts/stih418.dtsi @@ -0,0 +1,99 @@ +/* + * Copyright (C) 2014 STMicroelectronics Limited. + * Author: Peter Griffin <peter.griffin@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#include "stih418-clock.dtsi" +#include "stih407-family.dtsi" +#include "stih410-pinctrl.dtsi" +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <2>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <3>; + }; + }; + + soc { + usb2_picophy1: phy2 { + compatible = "st,stih407-usb2-phy"; + #phy-cells = <0>; + st,syscfg = <&syscfg_core 0xf8 0xf4>; + resets = <&softreset STIH407_PICOPHY_SOFTRESET>, + <&picophyreset STIH407_PICOPHY0_RESET>; + reset-names = "global", "port"; + }; + + usb2_picophy2: phy3 { + compatible = "st,stih407-usb2-phy"; + #phy-cells = <0>; + st,syscfg = <&syscfg_core 0xfc 0xf4>; + resets = <&softreset STIH407_PICOPHY_SOFTRESET>, + <&picophyreset STIH407_PICOPHY1_RESET>; + reset-names = "global", "port"; + }; + + ohci0: usb@9a03c00 { + compatible = "st,st-ohci-300x"; + reg = <0x9a03c00 0x100>; + interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, + <&softreset STIH407_USB2_PORT0_SOFTRESET>; + reset-names = "power", "softreset"; + phys = <&usb2_picophy1>; + phy-names = "usb"; + }; + + ehci0: usb@9a03e00 { + compatible = "st,st-ehci-300x"; + reg = <0x9a03e00 0x100>; + interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, + <&softreset STIH407_USB2_PORT0_SOFTRESET>; + reset-names = "power", "softreset"; + phys = <&usb2_picophy1>; + phy-names = "usb"; + }; + + ohci1: usb@9a83c00 { + compatible = "st,st-ohci-300x"; + reg = <0x9a83c00 0x100>; + interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, + <&softreset STIH407_USB2_PORT1_SOFTRESET>; + reset-names = "power", "softreset"; + phys = <&usb2_picophy2>; + phy-names = "usb"; + }; + + ehci1: usb@9a83e00 { + compatible = "st,st-ehci-300x"; + reg = <0x9a83e00 0x100>; + interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, + <&softreset STIH407_USB2_PORT1_SOFTRESET>; + reset-names = "power", "softreset"; + phys = <&usb2_picophy2>; + phy-names = "usb"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index 0074bd49797c..c1d859092be7 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -48,12 +48,23 @@ }; /* SSC11 to HDMI */ - i2c@9541000 { + hdmiddc: i2c@9541000 { status = "okay"; /* HDMI V1.3a supports Standard mode only */ clock-frequency = <100000>; st,i2c-min-scl-pulse-width-us = <0>; st,i2c-min-sda-pulse-width-us = <5>; }; + + miphy28lp_phy: miphy28lp@9b22000 { + + phy_port0: port@9b22000 { + st,osc-rdy; + }; + + phy_port1: port@9b2a000 { + st,osc-force-ext; + }; + }; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index 3bcfd81837f0..b67e5be618cf 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -48,8 +48,11 @@ */ /dts-v1/; -/include/ "sun4i-a10.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Mele A1000"; @@ -77,7 +80,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -112,15 +115,15 @@ emac_power_pin_a1000: emac_power_pin@0 { allwinner,pins = "PH15"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; led_pins_a1000: led_pins@0 { allwinner,pins = "PH10", "PH20"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -159,12 +162,12 @@ red { label = "a1000:red:usr"; - gpios = <&pio 7 10 0>; + gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; }; blue { label = "a1000:blue:usr"; - gpios = <&pio 7 20 0>; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; }; @@ -176,7 +179,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; - gpio = <&pio 7 15 0>; + gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; }; reg_usb1_vbus: usb1-vbus { diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index f3f2974658e4..490b77c9bb36 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -46,8 +46,10 @@ */ /dts-v1/; -/include/ "sun4i-a10.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> / { model = "BA10 tvbox"; @@ -74,7 +76,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -140,7 +142,7 @@ }; reg_usb2_vbus: usb2-vbus { - gpio = <&pio 7 12 0>; + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts new file mode 100644 index 000000000000..58214f249598 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -0,0 +1,100 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Chuwi V7 CW0825"; + compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 6a310da53f18..4260c2b47607 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -47,8 +47,11 @@ */ /dts-v1/; -/include/ "sun4i-a10.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Cubietech Cubieboard"; @@ -75,7 +78,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -111,8 +114,8 @@ led_pins_cubieboard: led_pins@0 { allwinner,pins = "PH20", "PH21"; allwinner,function = "gpio_out"; - allwinner,drive = <1>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -134,12 +137,8 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; }; }; @@ -148,6 +147,12 @@ pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; + + spi0: spi@01c05000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + status = "okay"; + }; }; leds { @@ -157,12 +162,12 @@ blue { label = "cubieboard:blue:usr"; - gpios = <&pio 7 21 0>; /* LED1 */ + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */ }; green { label = "cubieboard:green:usr"; - gpios = <&pio 7 20 0>; /* LED2 */ + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */ linux,default-trigger = "heartbeat"; }; }; @@ -179,3 +184,34 @@ status = "okay"; }; }; + +#include "axp209.dtsi" + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index efc116287e0f..d3f73ea25567 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -48,8 +48,11 @@ */ /dts-v1/; -/include/ "sun4i-a10.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Miniand Hackberry"; @@ -77,7 +80,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -111,15 +114,15 @@ hackberry_hogs: hogs@0 { allwinner,pins = "PH19"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; usb2_vbus_pin_hackberry: usb2_vbus_pin@0 { allwinner,pins = "PH12"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -157,7 +160,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; - gpio = <&pio 7 19 0>; + gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; }; reg_usb1_vbus: usb1-vbus { @@ -166,7 +169,7 @@ reg_usb2_vbus: usb2-vbus { pinctrl-0 = <&usb2_vbus_pin_hackberry>; - gpio = <&pio 7 12 0>; + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts new file mode 100644 index 000000000000..c88382aacc36 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -0,0 +1,105 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Hyundai A7HD"; + compatible = "hyundai,a7hd", "allwinner,sun4i-a10"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +®_usb2_vbus { + gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb2_vbus_pin_a { + allwinner,pins = "PH6"; +}; + +&usbphy { + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 3e25ee4d3248..482914333bba 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -48,8 +48,10 @@ */ /dts-v1/; -/include/ "sun4i-a10.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> / { model = "INet-97F Rev 02"; @@ -65,7 +67,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts new file mode 100644 index 000000000000..9ee86a700c2b --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -0,0 +1,183 @@ +/* + * Copyright 2015 Aleksei Mamlin + * Aleksei Mamlin <mamlinav@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "HAOYU Electronics Marsboard A10"; + compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_marsboard>; + + red1 { + label = "marsboard:red1:usr"; + gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>; + }; + + red2 { + label = "marsboard:red2:usr"; + gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>; + }; + + red3 { + label = "marsboard:red3:usr"; + gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; + }; + + red4 { + label = "marsboard:red4:usr"; + gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&ahci { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&mdio { + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + led_pins_marsboard: led_pins@0 { + allwinner,pins = "PB5", "PB6", "PB7", "PB8"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index 8b3f97470249..eb5fd6904a69 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -48,8 +48,11 @@ */ /dts-v1/; -/include/ "sun4i-a10.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "PineRiver Mini X-Plus"; @@ -61,7 +64,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -91,7 +94,7 @@ pinctrl@01c20800 { ir0_pins_a: ir0@0 { /* The ir receiver is not always populated */ - allwinner,pull = <1>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts new file mode 100644 index 000000000000..e9a6886f0d51 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts @@ -0,0 +1,109 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "MK802"; + compatible = "allwinner,mk802", "allwinner,sun4i-a10"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + usb2_vbus_pin_mk802: usb2_vbus_pin@0 { + allwinner,pins = "PH12"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + pinctrl-0 = <&usb2_vbus_pin_mk802>; + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts new file mode 100644 index 000000000000..802eda494d1c --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts @@ -0,0 +1,113 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "MK802ii"; + compatible = "allwinner,mk802ii", "allwinner,sun4i-a10"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 88cf1a531155..ab7891c43231 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -46,8 +46,11 @@ */ /dts-v1/; -/include/ "sun4i-a10.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A10-OLinuXino-LIME"; @@ -74,7 +77,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -110,15 +113,15 @@ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { allwinner,pins = "PC3"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; led_pins_olinuxinolime: led_pins@0 { allwinner,pins = "PH2"; allwinner,function = "gpio_out"; - allwinner,drive = <1>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -151,14 +154,14 @@ green { label = "a10-olinuxino-lime:green:usr"; - gpios = <&pio 7 2 0>; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_ahci_5v: ahci-5v { pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; - gpio = <&pio 2 3 0>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index ce5994597407..9d1e5482cf82 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -47,8 +47,12 @@ */ /dts-v1/; -/include/ "sun4i-a10.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "LinkSprite pcDuino"; @@ -62,6 +66,22 @@ status = "okay"; }; + pinctrl@01c20800 { + led_pins_pcduino: led_pins@0 { + allwinner,pins = "PH15", "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + key_pins_pcduino: key_pins@0 { + allwinner,pins = "PH17", "PH18", "PH19"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + mdio@01c0b080 { status = "okay"; @@ -75,7 +95,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -124,6 +144,48 @@ }; }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_pcduino>; + + tx { + label = "pcduino:green:tx"; + gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; + }; + + rx { + label = "pcduino:green:rx"; + gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_pins_pcduino>; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + label = "Key Back"; + linux,code = <KEY_BACK>; + gpios = <&pio 7 17 GPIO_ACTIVE_LOW>; + }; + + button@1 { + label = "Key Home"; + linux,code = <KEY_HOME>; + gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; + }; + + button@2 { + label = "Key Menu"; + linux,code = <KEY_MENU>; + gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; + }; + }; + reg_usb1_vbus: usb1-vbus { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index d5c4669224b1..5c2925831f20 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -10,7 +10,12 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" + +#include <dt-bindings/thermal/thermal.h> + +#include <dt-bindings/dma/sun4i-a10.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&intc>; @@ -39,15 +44,78 @@ <&ahb_gates 44>, <&ahb_gates 46>; status = "disabled"; }; + + framebuffer@2 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_fe0-de_be0-lcd0"; + clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>, + <&ahb_gates 46>; + status = "disabled"; + }; + + framebuffer@3 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0"; + clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, + <&ahb_gates 44>, <&ahb_gates 46>; + status = "disabled"; + }; }; cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a8"; reg = <0x0>; + clocks = <&cpu>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1056000 1500000 + 1008000 1400000 + 912000 1350000 + 864000 1300000 + 624000 1250000 + >; + #cooling-cells = <2>; + cooling-min-level = <0>; + cooling-max-level = <4>; + }; + }; + + thermal-zones { + cpu_thermal { + /* milliseconds */ + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&rtp>; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu_alert0: cpu_alert0 { + /* milliCelsius */ + temperature = <850000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit { + /* milliCelsius */ + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; @@ -226,35 +294,43 @@ }; mmc0_clk: clk@01c20088 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20088 0x4>; clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0"; + clock-output-names = "mmc0", + "mmc0_output", + "mmc0_sample"; }; mmc1_clk: clk@01c2008c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c2008c 0x4>; clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1"; + clock-output-names = "mmc1", + "mmc1_output", + "mmc1_sample"; }; mmc2_clk: clk@01c20090 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20090 0x4>; clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2"; + clock-output-names = "mmc2", + "mmc2_output", + "mmc2_sample"; }; mmc3_clk: clk@01c20094 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20094 0x4>; clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc3"; + clock-output-names = "mmc3", + "mmc3_output", + "mmc3_sample"; }; ts_clk: clk@01c20098 { @@ -359,7 +435,8 @@ interrupts = <10>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 27>, <&dma 1 26>; + dmas = <&dma SUN4I_DMA_DEDICATED 27>, + <&dma SUN4I_DMA_DEDICATED 26>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -372,7 +449,8 @@ interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 9>, <&dma 1 8>; + dmas = <&dma SUN4I_DMA_DEDICATED 9>, + <&dma SUN4I_DMA_DEDICATED 8>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -387,7 +465,7 @@ status = "disabled"; }; - mdio@01c0b080 { + mdio: mdio@01c0b080 { compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; status = "disabled"; @@ -398,8 +476,14 @@ mmc0: mmc@01c0f000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, <&mmc0_clk>; - clock-names = "ahb", "mmc"; + clocks = <&ahb_gates 8>, + <&mmc0_clk 0>, + <&mmc0_clk 1>, + <&mmc0_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; interrupts = <32>; status = "disabled"; }; @@ -407,8 +491,14 @@ mmc1: mmc@01c10000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&ahb_gates 9>, <&mmc1_clk>; - clock-names = "ahb", "mmc"; + clocks = <&ahb_gates 9>, + <&mmc1_clk 0>, + <&mmc1_clk 1>, + <&mmc1_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; interrupts = <33>; status = "disabled"; }; @@ -416,8 +506,14 @@ mmc2: mmc@01c11000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, <&mmc2_clk>; - clock-names = "ahb", "mmc"; + clocks = <&ahb_gates 10>, + <&mmc2_clk 0>, + <&mmc2_clk 1>, + <&mmc2_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; interrupts = <34>; status = "disabled"; }; @@ -425,8 +521,14 @@ mmc3: mmc@01c12000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c12000 0x1000>; - clocks = <&ahb_gates 11>, <&mmc3_clk>; - clock-names = "ahb", "mmc"; + clocks = <&ahb_gates 11>, + <&mmc3_clk 0>, + <&mmc3_clk 1>, + <&mmc3_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; interrupts = <35>; status = "disabled"; }; @@ -469,7 +571,8 @@ interrupts = <12>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 29>, <&dma 1 28>; + dmas = <&dma SUN4I_DMA_DEDICATED 29>, + <&dma SUN4I_DMA_DEDICATED 28>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -510,7 +613,8 @@ interrupts = <50>; clocks = <&ahb_gates 23>, <&spi3_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 31>, <&dma 1 30>; + dmas = <&dma SUN4I_DMA_DEDICATED 31>, + <&dma SUN4I_DMA_DEDICATED 30>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -538,57 +642,57 @@ pwm0_pins_a: pwm0@0 { allwinner,pins = "PB2"; allwinner,function = "pwm"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; pwm1_pins_a: pwm1@0 { allwinner,pins = "PI3"; allwinner,function = "pwm"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart0_pins_a: uart0@0 { allwinner,pins = "PB22", "PB23"; allwinner,function = "uart0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart0_pins_b: uart0@1 { allwinner,pins = "PF2", "PF4"; allwinner,function = "uart0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart1_pins_a: uart1@0 { allwinner,pins = "PA10", "PA11"; allwinner,function = "uart1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c0_pins_a: i2c0@0 { allwinner,pins = "PB0", "PB1"; allwinner,function = "i2c0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c1_pins_a: i2c1@0 { allwinner,pins = "PB18", "PB19"; allwinner,function = "i2c1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c2_pins_a: i2c2@0 { allwinner,pins = "PB20", "PB21"; allwinner,function = "i2c2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; emac_pins_a: emac0@0 { @@ -598,36 +702,78 @@ "PA11", "PA12", "PA13", "PA14", "PA15", "PA16"; allwinner,function = "emac"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; allwinner,function = "mmc0"; - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { allwinner,pins = "PH1"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; ir0_pins_a: ir0@0 { allwinner,pins = "PB3","PB4"; allwinner,function = "ir0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; ir1_pins_a: ir1@0 { allwinner,pins = "PB22","PB23"; allwinner,function = "ir1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi0_pins_a: spi0@0 { + allwinner,pins = "PI10", "PI11", "PI12", "PI13"; + allwinner,function = "spi0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi1_pins_a: spi1@0 { + allwinner,pins = "PI16", "PI17", "PI18", "PI19"; + allwinner,function = "spi1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi2_pins_a: spi2@0 { + allwinner,pins = "PB14", "PB15", "PB16", "PB17"; + allwinner,function = "spi2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi2_pins_b: spi2@1 { + allwinner,pins = "PC19", "PC20", "PC21", "PC22"; + allwinner,function = "spi2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + ps20_pins_a: ps20@0 { + allwinner,pins = "PI20", "PI21"; + allwinner,function = "ps2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + ps21_pins_a: ps21@0 { + allwinner,pins = "PH12", "PH13"; + allwinner,function = "ps2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -675,6 +821,13 @@ status = "disabled"; }; + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; @@ -684,6 +837,7 @@ compatible = "allwinner,sun4i-a10-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; + #thermal-sensor-cells = <0>; }; uart0: serial@01c28000 { @@ -795,5 +949,21 @@ #address-cells = <1>; #size-cells = <0>; }; + + ps20: ps2@01c2a000 { + compatible = "allwinner,sun4i-a10-ps2"; + reg = <0x01c2a000 0x400>; + interrupts = <62>; + clocks = <&apb1_gates 6>; + status = "disabled"; + }; + + ps21: ps2@01c2a400 { + compatible = "allwinner,sun4i-a10-ps2"; + reg = <0x01c2a400 0x400>; + interrupts = <63>; + clocks = <&apb1_gates 7>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts new file mode 100644 index 000000000000..b21af87d9eae --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts @@ -0,0 +1,125 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a10s.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "MK802-A10s"; + compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_mk802>; + + red { + label = "mk802:red:usr"; + gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ + }; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + led_pins_mk802: led_pins@0 { + allwinner,pins = "PB2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_mk802: mmc0_cd_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb1_vbus_pin_mk802: usb1_vbus_pin@0 { + allwinner,pins = "PB10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_mk802>; + gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index bfa742817690..2bbc93b935ca 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -48,8 +48,12 @@ */ /dts-v1/; -/include/ "sun5i-a10s.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun5i-a10s.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A10s-Olinuxino Micro"; @@ -82,7 +86,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 1 0>; /* PG1 */ + cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ cd-inverted; status = "okay"; }; @@ -92,7 +96,7 @@ pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 13 0>; /* PG13 */ + cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ cd-inverted; status = "okay"; }; @@ -114,29 +118,69 @@ mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { allwinner,pins = "PG1"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { allwinner,pins = "PG13"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; led_pins_olinuxino: led_pins@0 { allwinner,pins = "PE3"; allwinner,function = "gpio_out"; - allwinner,drive = <1>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 { allwinner,pins = "PB10"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + + lradc: lradc@01c22800 { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@191 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191274>; + }; + + button@392 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <392644>; + }; + + button@601 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <601151>; + }; + + button@795 { + label = "Enter"; + linux,code = <KEY_ENTER>; + channel = <0>; + voltage = <795090>; + }; + + button@987 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <987387>; }; }; @@ -191,14 +235,14 @@ green { label = "a10s-olinuxino-micro:green:usr"; - gpios = <&pio 4 3 0>; + gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_usb1_vbus: usb1-vbus { pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>; - gpio = <&pio 1 10 0>; + gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts index 1fa2916eafc2..7deddfc9df8b 100644 --- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -46,8 +46,11 @@ */ /dts-v1/; -/include/ "sun5i-a10s.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun5i-a10s.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "R7 A10s hdmi tv-stick"; @@ -59,7 +62,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 1 0>; /* PG1 */ + cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ cd-inverted; status = "okay"; }; @@ -90,22 +93,22 @@ mmc0_cd_pin_r7: mmc0_cd_pin@0 { allwinner,pins = "PG1"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; led_pins_r7: led_pins@0 { allwinner,pins = "PB2"; allwinner,function = "gpio_out"; - allwinner,drive = <1>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; usb1_vbus_pin_r7: usb1_vbus_pin@0 { allwinner,pins = "PG13"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -123,14 +126,14 @@ green { label = "r7-tv-dongle:green:usr"; - gpios = <&pio 1 2 0>; + gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_usb1_vbus: usb1-vbus { pinctrl-0 = <&usb1_vbus_pin_r7>; - gpio = <&pio 6 13 0>; + gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 2e7d8263799d..2fd8988f310c 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -11,7 +11,10 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" + +#include <dt-bindings/dma/sun4i-a10.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&intc>; @@ -32,6 +35,14 @@ <&ahb_gates 44>; status = "disabled"; }; + + framebuffer@1 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; + clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>; + status = "disabled"; + }; }; cpus { @@ -207,27 +218,33 @@ }; mmc0_clk: clk@01c20088 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20088 0x4>; clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0"; + clock-output-names = "mmc0", + "mmc0_output", + "mmc0_sample"; }; mmc1_clk: clk@01c2008c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c2008c 0x4>; clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1"; + clock-output-names = "mmc1", + "mmc1_output", + "mmc1_sample"; }; mmc2_clk: clk@01c20090 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20090 0x4>; clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2"; + clock-output-names = "mmc2", + "mmc2_output", + "mmc2_sample"; }; ts_clk: clk@01c20098 { @@ -316,7 +333,8 @@ interrupts = <10>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 27>, <&dma 1 26>; + dmas = <&dma SUN4I_DMA_DEDICATED 27>, + <&dma SUN4I_DMA_DEDICATED 26>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -329,7 +347,8 @@ interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 9>, <&dma 1 8>; + dmas = <&dma SUN4I_DMA_DEDICATED 9>, + <&dma SUN4I_DMA_DEDICATED 8>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -344,7 +363,7 @@ status = "disabled"; }; - mdio@01c0b080 { + mdio: mdio@01c0b080 { compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; status = "disabled"; @@ -355,8 +374,14 @@ mmc0: mmc@01c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, <&mmc0_clk>; - clock-names = "ahb", "mmc"; + clocks = <&ahb_gates 8>, + <&mmc0_clk 0>, + <&mmc0_clk 1>, + <&mmc0_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; interrupts = <32>; status = "disabled"; }; @@ -364,8 +389,14 @@ mmc1: mmc@01c10000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&ahb_gates 9>, <&mmc1_clk>; - clock-names = "ahb", "mmc"; + clocks = <&ahb_gates 9>, + <&mmc1_clk 0>, + <&mmc1_clk 1>, + <&mmc1_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; interrupts = <33>; status = "disabled"; }; @@ -373,8 +404,14 @@ mmc2: mmc@01c11000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, <&mmc2_clk>; - clock-names = "ahb", "mmc"; + clocks = <&ahb_gates 10>, + <&mmc2_clk 0>, + <&mmc2_clk 1>, + <&mmc2_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; interrupts = <34>; status = "disabled"; }; @@ -417,7 +454,8 @@ interrupts = <12>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 29>, <&dma 1 28>; + dmas = <&dma SUN4I_DMA_DEDICATED 29>, + <&dma SUN4I_DMA_DEDICATED 28>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -445,22 +483,22 @@ uart0_pins_a: uart0@0 { allwinner,pins = "PB19", "PB20"; allwinner,function = "uart0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart2_pins_a: uart2@0 { allwinner,pins = "PC18", "PC19"; allwinner,function = "uart2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart3_pins_a: uart3@0 { allwinner,pins = "PG9", "PG10"; allwinner,function = "uart3"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; emac_pins_a: emac0@0 { @@ -470,43 +508,43 @@ "PA11", "PA12", "PA13", "PA14", "PA15", "PA16"; allwinner,function = "emac"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c0_pins_a: i2c0@0 { allwinner,pins = "PB0", "PB1"; allwinner,function = "i2c0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c1_pins_a: i2c1@0 { allwinner,pins = "PB15", "PB16"; allwinner,function = "i2c1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c2_pins_a: i2c2@0 { allwinner,pins = "PB17", "PB18"; allwinner,function = "i2c2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; allwinner,function = "mmc0"; - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc1_pins_a: mmc1@0 { allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8"; allwinner,function = "mmc1"; - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -522,6 +560,13 @@ reg = <0x01c20c90 0x10>; }; + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; @@ -531,6 +576,7 @@ compatible = "allwinner,sun4i-a10-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; + #thermal-sensor-cells = <0>; }; uart0: serial@01c28000 { diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index c7be3abd9fcc..03aa04555630 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -46,8 +46,11 @@ */ /dts-v1/; -/include/ "sun5i-a13.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "HSG H702"; @@ -63,17 +66,13 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ cd-inverted; status = "okay"; }; usbphy: phy@01c13400 { - /* - * There doesn't seem to be a GPIO for controlling - * usb1 vbus, despite the fex file saying otherwise. - */ - usb1_vbus-supply = <®_vcc5v0>; + usb1_vbus-supply = <®_ldo3>; status = "okay"; }; @@ -89,8 +88,8 @@ mmc0_cd_pin_h702: mmc0_cd_pin@0 { allwinner,pins = "PG0"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; }; @@ -106,11 +105,8 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupts = <0>; - interrupt-controller; - #interrupt-cells = <1>; }; }; @@ -132,3 +128,40 @@ }; }; }; + +#include "axp209.dtsi" + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 3decefb3c37a..03deb84268ce 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -47,8 +47,11 @@ */ /dts-v1/; -/include/ "sun5i-a13.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A13-Olinuxino Micro"; @@ -64,7 +67,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ cd-inverted; status = "okay"; }; @@ -86,22 +89,22 @@ mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { allwinner,pins = "PG0"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; led_pins_olinuxinom: led_pins@0 { allwinner,pins = "PG9"; allwinner,function = "gpio_out"; - allwinner,drive = <1>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 { allwinner,pins = "PG11"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -137,14 +140,14 @@ power { label = "a13-olinuxino-micro:green:power"; - gpios = <&pio 6 9 0>; + gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_usb1_vbus: usb1-vbus { pinctrl-0 = <&usb1_vbus_pin_olinuxinom>; - gpio = <&pio 6 11 0>; + gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index b421f7fa197b..6b24876ed462 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -48,8 +48,12 @@ */ /dts-v1/; -/include/ "sun5i-a13.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A13-Olinuxino"; @@ -65,7 +69,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ cd-inverted; status = "okay"; }; @@ -87,22 +91,62 @@ mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { allwinner,pins = "PG0"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; led_pins_olinuxino: led_pins@0 { allwinner,pins = "PG9"; allwinner,function = "gpio_out"; - allwinner,drive = <1>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 { allwinner,pins = "PG11"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + + lradc: lradc@01c22800 { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@191 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191274>; + }; + + button@392 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <392644>; + }; + + button@601 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <601151>; + }; + + button@795 { + label = "Enter"; + linux,code = <KEY_ENTER>; + channel = <0>; + voltage = <795090>; + }; + + button@987 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <987387>; }; }; @@ -116,6 +160,15 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; }; i2c1: i2c@01c2b000 { @@ -137,14 +190,14 @@ pinctrl-0 = <&led_pins_olinuxino>; power { - gpios = <&pio 6 9 0>; + gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_usb1_vbus: usb1-vbus { pinctrl-0 = <&usb1_vbus_pin_olinuxino>; - gpio = <&pio 6 11 0>; + gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index c556688f8b8b..f8818f1edbbe 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -11,18 +11,85 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" + +#include <dt-bindings/thermal/thermal.h> + +#include <dt-bindings/dma/sun4i-a10.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&intc>; + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@0 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; + clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>; + status = "disabled"; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a8"; reg = <0x0>; + clocks = <&cpu>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1104000 1500000 + 1008000 1400000 + 912000 1350000 + 864000 1300000 + 624000 1200000 + 576000 1200000 + 432000 1200000 + >; + #cooling-cells = <2>; + cooling-min-level = <0>; + cooling-max-level = <6>; + }; + }; + + thermal-zones { + cpu_thermal { + /* milliseconds */ + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&rtp>; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu_alert0: cpu_alert0 { + /* milliCelsius */ + temperature = <850000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit { + /* milliCelsius */ + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; @@ -190,27 +257,33 @@ }; mmc0_clk: clk@01c20088 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20088 0x4>; clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0"; + clock-output-names = "mmc0", + "mmc0_output", + "mmc0_sample"; }; mmc1_clk: clk@01c2008c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c2008c 0x4>; clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1"; + clock-output-names = "mmc1", + "mmc1_output", + "mmc1_sample"; }; mmc2_clk: clk@01c20090 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20090 0x4>; clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2"; + clock-output-names = "mmc2", + "mmc2_output", + "mmc2_sample"; }; ts_clk: clk@01c20098 { @@ -299,7 +372,8 @@ interrupts = <10>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 27>, <&dma 1 26>; + dmas = <&dma SUN4I_DMA_DEDICATED 27>, + <&dma SUN4I_DMA_DEDICATED 26>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -312,7 +386,8 @@ interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 9>, <&dma 1 8>; + dmas = <&dma SUN4I_DMA_DEDICATED 9>, + <&dma SUN4I_DMA_DEDICATED 8>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -322,8 +397,14 @@ mmc0: mmc@01c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, <&mmc0_clk>; - clock-names = "ahb", "mmc"; + clocks = <&ahb_gates 8>, + <&mmc0_clk 0>, + <&mmc0_clk 1>, + <&mmc0_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; interrupts = <32>; status = "disabled"; }; @@ -331,8 +412,14 @@ mmc2: mmc@01c11000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, <&mmc2_clk>; - clock-names = "ahb", "mmc"; + clocks = <&ahb_gates 10>, + <&mmc2_clk 0>, + <&mmc2_clk 1>, + <&mmc2_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; interrupts = <34>; status = "disabled"; }; @@ -375,7 +462,8 @@ interrupts = <12>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 29>, <&dma 1 28>; + dmas = <&dma SUN4I_DMA_DEDICATED 29>, + <&dma SUN4I_DMA_DEDICATED 28>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -403,43 +491,43 @@ uart1_pins_a: uart1@0 { allwinner,pins = "PE10", "PE11"; allwinner,function = "uart1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart1_pins_b: uart1@1 { allwinner,pins = "PG3", "PG4"; allwinner,function = "uart1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c0_pins_a: i2c0@0 { allwinner,pins = "PB0", "PB1"; allwinner,function = "i2c0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c1_pins_a: i2c1@0 { allwinner,pins = "PB15", "PB16"; allwinner,function = "i2c1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c2_pins_a: i2c2@0 { allwinner,pins = "PB17", "PB18"; allwinner,function = "i2c2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; allwinner,function = "mmc0"; - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -455,6 +543,13 @@ reg = <0x01c20c90 0x10>; }; + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; @@ -464,6 +559,7 @@ compatible = "allwinner,sun4i-a10-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; + #thermal-sensor-cells = <0>; }; uart1: serial@01c28400 { diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts index c74a63a39531..be9f5ee6b59e 100644 --- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts +++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts @@ -48,8 +48,11 @@ */ /dts-v1/; -/include/ "sun6i-a31.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun6i-a31.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Allwinner A31 APP4 EVB1 Evaluation Board"; @@ -64,8 +67,8 @@ usb1_vbus_pin_a: usb1_vbus_pin@0 { allwinner,pins = "PH27"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -87,7 +90,7 @@ reg_usb1_vbus: usb1-vbus { pinctrl-0 = <&usb1_vbus_pin_a>; - gpio = <&pio 7 27 0>; + gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index c36b4dc89c13..84630e56acd7 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -48,8 +48,11 @@ */ /dts-v1/; -/include/ "sun6i-a31.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun6i-a31.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "WITS A31 Colombus Evaluation Board"; @@ -65,7 +68,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 0 8 0>; /* PA8 */ + cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ cd-inverted; status = "okay"; }; @@ -81,21 +84,21 @@ pio: pinctrl@01c20800 { mmc0_pins_a: mmc0@0 { - allwinner,pull = <1>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; mmc0_cd_pin_colombus: mmc0_cd_pin@0 { allwinner,pins = "PA8"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; usb2_vbus_pin_colombus: usb2_vbus_pin@0 { allwinner,pins = "PH24"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -127,7 +130,7 @@ reg_usb2_vbus: usb2-vbus { pinctrl-names = "default"; pinctrl-0 = <&usb2_vbus_pin_colombus>; - gpio = <&pio 7 24 0>; + gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 6e924d9d2912..8b61b1b342e0 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -48,8 +48,11 @@ */ /dts-v1/; -/include/ "sun6i-a31.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun6i-a31.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Merrii A31 Hummingbird"; @@ -58,98 +61,96 @@ chosen { bootargs = "earlyprintk console=ttyS0,115200"; }; +}; + +&ehci0 { + status = "okay"; +}; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 0 8 0>; /* PA8 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c19400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; - }; - - ehci0: usb@01c1a000 { - status = "okay"; - }; - - ohci0: usb@01c1a400 { - status = "okay"; - }; - - pio: pinctrl@01c20800 { - mmc0_pins_a: mmc0@0 { - /* external pull-ups missing for some pins */ - allwinner,pull = <1>; - }; - - mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; - }; - - usb1_vbus_pin_a: usb1_vbus_pin@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - /* pull-ups and devices require AXP221 DLDO3 */ - status = "failed"; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - }; - - gmac: ethernet@01c30000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; - phy = <&phy1>; - phy-mode = "rgmii"; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + /* pull-ups and devices require AXP221 DLDO3 */ + status = "failed"; +}; - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_a>; - gpio = <&pio 7 24 0>; /* PH24 */ - status = "okay"; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; }; }; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + cd-inverted; + status = "okay"; +}; + +&mmc0_pins_a { + /* external pull-ups missing for some pins */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 { + allwinner,pins = "PA8"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +®_usb1_vbus { + gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb1_vbus_pin_a { + /* different pin from sunxi-common-regulators */ + allwinner,pins = "PH24"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 3ab544f3af4a..139a21e6b695 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -46,8 +46,11 @@ */ /dts-v1/; -/include/ "sun6i-a31.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun6i-a31.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Mele M9 / A1000G Quad top set box"; @@ -63,7 +66,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 22 0>; /* PH22 */ + cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ cd-inverted; status = "okay"; }; @@ -85,22 +88,22 @@ led_pins_m9: led_pins@0 { allwinner,pins = "PH13"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_cd_pin_m9: mmc0_cd_pin@0 { allwinner,pins = "PH22"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; usb1_vbus_pin_m9: usb1_vbus_pin@0 { allwinner,pins = "PC27"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -121,6 +124,12 @@ reg = <1>; }; }; + + ir@01f02000 { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; + }; }; leds { @@ -130,14 +139,14 @@ blue { label = "m9:blue:usr"; - gpios = <&pio 7 13 0>; + gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; }; }; reg_usb1_vbus: usb1-vbus { pinctrl-names = "default"; pinctrl-0 = <&usb1_vbus_pin_m9>; - gpio = <&pio 2 27 0>; + gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 1e7e7bcf8307..fa2f403ccf28 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -47,7 +47,11 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&gic>; @@ -67,6 +71,24 @@ clocks = <&pll6 0>; status = "disabled"; }; + + framebuffer@1 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; + clocks = <&pll6 0>; + status = "disabled"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>; + arm,cpu-registers-not-fw-configured; }; cpus { @@ -105,10 +127,10 @@ pmu { compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; - interrupts = <0 120 4>, - <0 121 4>, - <0 122 4>, - <0 123 4>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; }; clocks { @@ -168,19 +190,11 @@ clock-output-names = "axi"; }; - ahb1_mux: ahb1_mux@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun6i-a31-ahb1-mux-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; - clock-output-names = "ahb1_mux"; - }; - ahb1: ahb1@01c20054 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-ahb-clk"; + compatible = "allwinner,sun6i-a31-ahb1-clk"; reg = <0x01c20054 0x4>; - clocks = <&ahb1_mux>; + clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; clock-output-names = "ahb1"; }; @@ -243,35 +257,43 @@ }; mmc0_clk: clk@01c20088 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20088 0x4>; clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "mmc0"; + clock-output-names = "mmc0", + "mmc0_output", + "mmc0_sample"; }; mmc1_clk: clk@01c2008c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c2008c 0x4>; clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "mmc1"; + clock-output-names = "mmc1", + "mmc1_output", + "mmc1_sample"; }; mmc2_clk: clk@01c20090 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20090 0x4>; clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "mmc2"; + clock-output-names = "mmc2", + "mmc2_output", + "mmc2_sample"; }; mmc3_clk: clk@01c20094 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20094 0x4>; clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "mmc3"; + clock-output-names = "mmc3", + "mmc3_output", + "mmc3_sample"; }; spi0_clk: clk@01c200a0 { @@ -355,57 +377,81 @@ dma: dma-controller@01c02000 { compatible = "allwinner,sun6i-a31-dma"; reg = <0x01c02000 0x1000>; - interrupts = <0 50 4>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 6>; resets = <&ahb1_rst 6>; #dma-cells = <1>; /* DMA controller requires AHB1 clocked from PLL6 */ - assigned-clocks = <&ahb1_mux>; + assigned-clocks = <&ahb1>; assigned-clock-parents = <&pll6 0>; }; mmc0: mmc@01c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ahb1_gates 8>, <&mmc0_clk>; - clock-names = "ahb", "mmc"; + clocks = <&ahb1_gates 8>, + <&mmc0_clk 0>, + <&mmc0_clk 1>, + <&mmc0_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; resets = <&ahb1_rst 8>; reset-names = "ahb"; - interrupts = <0 60 4>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; mmc1: mmc@01c10000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&ahb1_gates 9>, <&mmc1_clk>; - clock-names = "ahb", "mmc"; + clocks = <&ahb1_gates 9>, + <&mmc1_clk 0>, + <&mmc1_clk 1>, + <&mmc1_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; resets = <&ahb1_rst 9>; reset-names = "ahb"; - interrupts = <0 61 4>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; mmc2: mmc@01c11000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ahb1_gates 10>, <&mmc2_clk>; - clock-names = "ahb", "mmc"; + clocks = <&ahb1_gates 10>, + <&mmc2_clk 0>, + <&mmc2_clk 1>, + <&mmc2_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; resets = <&ahb1_rst 10>; reset-names = "ahb"; - interrupts = <0 62 4>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; mmc3: mmc@01c12000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c12000 0x1000>; - clocks = <&ahb1_gates 11>, <&mmc3_clk>; - clock-names = "ahb", "mmc"; + clocks = <&ahb1_gates 11>, + <&mmc3_clk 0>, + <&mmc3_clk 1>, + <&mmc3_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; resets = <&ahb1_rst 11>; reset-names = "ahb"; - interrupts = <0 63 4>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -436,7 +482,7 @@ ehci0: usb@01c1a000 { compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; reg = <0x01c1a000 0x100>; - interrupts = <0 72 4>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 26>; resets = <&ahb1_rst 26>; phys = <&usbphy 1>; @@ -447,7 +493,7 @@ ohci0: usb@01c1a400 { compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; reg = <0x01c1a400 0x100>; - interrupts = <0 73 4>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 29>, <&usb_clk 16>; resets = <&ahb1_rst 29>; phys = <&usbphy 1>; @@ -458,7 +504,7 @@ ehci1: usb@01c1b000 { compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; reg = <0x01c1b000 0x100>; - interrupts = <0 74 4>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 27>; resets = <&ahb1_rst 27>; phys = <&usbphy 2>; @@ -469,7 +515,7 @@ ohci1: usb@01c1b400 { compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; reg = <0x01c1b400 0x100>; - interrupts = <0 75 4>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 30>, <&usb_clk 17>; resets = <&ahb1_rst 30>; phys = <&usbphy 2>; @@ -480,7 +526,7 @@ ohci2: usb@01c1c400 { compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; reg = <0x01c1c400 0x100>; - interrupts = <0 77 4>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 31>, <&usb_clk 18>; resets = <&ahb1_rst 31>; status = "disabled"; @@ -489,10 +535,10 @@ pio: pinctrl@01c20800 { compatible = "allwinner,sun6i-a31-pinctrl"; reg = <0x01c20800 0x400>; - interrupts = <0 11 4>, - <0 15 4>, - <0 16 4>, - <0 17 4>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 5>; gpio-controller; interrupt-controller; @@ -503,36 +549,36 @@ uart0_pins_a: uart0@0 { allwinner,pins = "PH20", "PH21"; allwinner,function = "uart0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c0_pins_a: i2c0@0 { allwinner,pins = "PH14", "PH15"; allwinner,function = "i2c0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c1_pins_a: i2c1@0 { allwinner,pins = "PH16", "PH17"; allwinner,function = "i2c1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c2_pins_a: i2c2@0 { allwinner,pins = "PH18", "PH19"; allwinner,function = "i2c2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; allwinner,function = "mmc0"; - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; gmac_pins_mii_a: gmac_mii@0 { @@ -542,8 +588,8 @@ "PA20", "PA21", "PA22", "PA23", "PA24", "PA26", "PA27"; allwinner,function = "gmac"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; gmac_pins_gmii_a: gmac_gmii@0 { @@ -559,8 +605,8 @@ * data lines in GMII mode run at 125MHz and * might need a higher signal drive strength */ - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; gmac_pins_rgmii_a: gmac_rgmii@0 { @@ -573,8 +619,8 @@ * data lines in RGMII mode use DDR mode * and need a higher signal drive strength */ - allwinner,drive = <3>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_40_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -599,11 +645,11 @@ timer@01c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; - interrupts = <0 18 4>, - <0 19 4>, - <0 20 4>, - <0 21 4>, - <0 22 4>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&osc24M>; }; @@ -612,10 +658,17 @@ reg = <0x01c20ca0 0x20>; }; + rtp: rtp@01c25000 { + compatible = "allwinner,sun6i-a31-ts"; + reg = <0x01c25000 0x100>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <0>; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; - interrupts = <0 0 4>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 16>; @@ -628,7 +681,7 @@ uart1: serial@01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; - interrupts = <0 1 4>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 17>; @@ -641,7 +694,7 @@ uart2: serial@01c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; - interrupts = <0 2 4>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 18>; @@ -654,7 +707,7 @@ uart3: serial@01c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; - interrupts = <0 3 4>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 19>; @@ -667,7 +720,7 @@ uart4: serial@01c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; - interrupts = <0 4 4>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 20>; @@ -680,7 +733,7 @@ uart5: serial@01c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; - interrupts = <0 5 4>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 21>; @@ -693,7 +746,7 @@ i2c0: i2c@01c2ac00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; - interrupts = <0 6 4>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb2_gates 0>; resets = <&apb2_rst 0>; status = "disabled"; @@ -704,7 +757,7 @@ i2c1: i2c@01c2b000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; - interrupts = <0 7 4>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb2_gates 1>; resets = <&apb2_rst 1>; status = "disabled"; @@ -715,7 +768,7 @@ i2c2: i2c@01c2b400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b400 0x400>; - interrupts = <0 8 4>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb2_gates 2>; resets = <&apb2_rst 2>; status = "disabled"; @@ -726,7 +779,7 @@ i2c3: i2c@01c2b800 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b800 0x400>; - interrupts = <0 9 4>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb2_gates 3>; resets = <&apb2_rst 3>; status = "disabled"; @@ -737,7 +790,7 @@ gmac: ethernet@01c30000 { compatible = "allwinner,sun7i-a20-gmac"; reg = <0x01c30000 0x1054>; - interrupts = <0 82 4>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; clocks = <&ahb1_gates 17>, <&gmac_tx_clk>; clock-names = "stmmaceth", "allwinner_gmac_tx"; @@ -754,10 +807,10 @@ timer@01c60000 { compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; - interrupts = <0 51 4>, - <0 52 4>, - <0 53 4>, - <0 54 4>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 19>; resets = <&ahb1_rst 19>; }; @@ -765,7 +818,7 @@ spi0: spi@01c68000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c68000 0x1000>; - interrupts = <0 65 4>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; dmas = <&dma 23>, <&dma 23>; @@ -777,7 +830,7 @@ spi1: spi@01c69000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c69000 0x1000>; - interrupts = <0 66 4>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; dmas = <&dma 24>, <&dma 24>; @@ -789,7 +842,7 @@ spi2: spi@01c6a000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c6a000 0x1000>; - interrupts = <0 67 4>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; dmas = <&dma 25>, <&dma 25>; @@ -801,7 +854,7 @@ spi3: spi@01c6b000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c6b000 0x1000>; - interrupts = <0 68 4>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 23>, <&spi3_clk>; clock-names = "ahb", "mod"; dmas = <&dma 26>, <&dma 26>; @@ -818,13 +871,14 @@ <0x01c86000 0x2000>; interrupt-controller; #interrupt-cells = <3>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; rtc: rtc@01f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; - interrupts = <0 40 4>, <0 41 4>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; }; nmi_intc: interrupt-controller@01f00c0c { @@ -832,7 +886,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x01f00c0c 0x38>; - interrupts = <0 32 4>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; prcm@01f01400 { @@ -872,6 +926,13 @@ "apb0_i2c"; }; + ir_clk: ir_clk { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + clocks = <&osc32k>, <&osc24M>; + clock-output-names = "ir"; + }; + apb0_rst: apb0_rst { compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; @@ -883,11 +944,21 @@ reg = <0x01f01c00 0x300>; }; + ir: ir@01f02000 { + compatible = "allwinner,sun5i-a13-ir"; + clocks = <&apb0_gates 1>, <&ir_clk>; + clock-names = "apb", "ir"; + resets = <&apb0_rst 1>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x01f02000 0x40>; + status = "disabled"; + }; + r_pio: pinctrl@01f02c00 { compatible = "allwinner,sun6i-a31-r-pinctrl"; reg = <0x01f02c00 0x400>; - interrupts = <0 45 4>, - <0 46 4>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb0_gates 0>; resets = <&apb0_rst 0>; gpio-controller; @@ -895,6 +966,13 @@ #interrupt-cells = <2>; #size-cells = <0>; #gpio-cells = <3>; + + ir_pins_a: ir@0 { + allwinner,pins = "PL4"; + allwinner,function = "s_ir"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts new file mode 100644 index 000000000000..bc3734f67cf0 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts @@ -0,0 +1,104 @@ +/* + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31s.dtsi" + +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "CSQ CS908 top set box"; + compatible = "csq,cs908", "allwinner,sun6i-a31s"; +}; + +&usbphy { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + usb1_vbus_pin_csq908: usb1_vbus_pin@0 { + allwinner,pins = "PC27"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31s.dtsi b/arch/arm/boot/dts/sun6i-a31s.dtsi new file mode 100644 index 000000000000..eaf5ec8fd459 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s.dtsi @@ -0,0 +1,58 @@ +/* + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * The A31s is the same die as the A31 in a different package, this is + * reflected by it having different pinctrl compatible everything else is + * identical. + */ + +#include "sun6i-a31.dtsi" + +&pio { + compatible = "allwinner,sun6i-a31s-pinctrl"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index bd7b15add697..5dd139e7792e 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -48,8 +48,12 @@ */ /dts-v1/; -/include/ "sun7i-a20.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "LeMaker Banana Pi"; @@ -73,7 +77,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 10 0>; /* PH10 */ + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ cd-inverted; status = "okay"; }; @@ -108,22 +112,22 @@ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { allwinner,pins = "PH10"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; gmac_power_pin_bananapi: gmac_power_pin@0 { allwinner,pins = "PH23"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; led_pins_bananapi: led_pins@0 { allwinner,pins = "PH24"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -160,7 +164,7 @@ compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; @@ -194,7 +198,7 @@ green { label = "bananapi:green:usr"; - gpios = <&pio 7 24 0>; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; }; @@ -215,6 +219,6 @@ regulator-max-microvolt = <3300000>; startup-delay-us = <100000>; enable-active-high; - gpio = <&pio 7 23 0>; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts new file mode 100644 index 000000000000..fb89fe7ed21b --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -0,0 +1,262 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "LeMaker Banana Pro"; + compatible = "lemaker,bananapro", "allwinner,sun7i-a20"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_bananapro>; + + blue { + label = "bananapro:blue:usr"; + gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; + }; + + green { + label = "bananapro:green:usr"; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_bananapro>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; + }; + + reg_vmmc3: vmmc3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&vmmc3_pin_bananapro>; + regulator-name = "vmmc3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; + }; +}; + +&ahci { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + cd-inverted; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + gmac_power_pin_bananapro: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_bananapro: led_pins@0 { + allwinner,pins = "PH24", "PG2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_bananapro: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { + allwinner,pins = "PH0"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { + allwinner,pins = "PH1"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + vmmc3_pin_bananapro: vmmc3_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_bananapro>; + gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */ + status = "okay"; +}; + +®_usb2_vbus { + pinctrl-0 = <&usb2_vbus_pin_bananapro>; + gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 53680983461a..c4ab6edb6f15 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -3,17 +3,57 @@ * * Maxime Ripard <maxime.ripard@free-electrons.com> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -/include/ "sun7i-a20.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Cubietech Cubieboard2"; @@ -25,7 +65,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -61,8 +101,8 @@ led_pins_cubieboard2: led_pins@0 { allwinner,pins = "PH20", "PH21"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -84,13 +124,9 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; - interrupts = <0 8>; - - interrupt-controller; - #interrupt-cells = <1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -120,12 +156,12 @@ blue { label = "cubieboard2:blue:usr"; - gpios = <&pio 7 21 0>; + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; }; green { label = "cubieboard2:green:usr"; - gpios = <&pio 7 20 0>; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; }; @@ -141,3 +177,34 @@ status = "okay"; }; }; + +#include "axp209.dtsi" + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index a281d259b9b8..8f74a649576d 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -3,17 +3,57 @@ * * Oliver Schinagl <oliver@schinagl.nl> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -/include/ "sun7i-a20.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Cubietech Cubietruck"; @@ -25,7 +65,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -70,35 +110,35 @@ pinctrl@01c20800 { mmc3_pins_a: mmc3@0 { /* AP6210 requires pull-up */ - allwinner,pull = <1>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; vmmc3_pin_cubietruck: vmmc3_pin@0 { allwinner,pins = "PH9"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { allwinner,pins = "PH12"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; led_pins_cubietruck: led_pins@0 { allwinner,pins = "PH7", "PH11", "PH20", "PH21"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; usb0_vbus_pin_a: usb0_vbus_pin@0 { allwinner,pins = "PH17"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -126,13 +166,9 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; - interrupts = <0 8>; - - interrupt-controller; - #interrupt-cells = <1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -168,34 +204,34 @@ blue { label = "cubietruck:blue:usr"; - gpios = <&pio 7 21 0>; + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; }; orange { label = "cubietruck:orange:usr"; - gpios = <&pio 7 20 0>; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; white { label = "cubietruck:white:usr"; - gpios = <&pio 7 11 0>; + gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; }; green { label = "cubietruck:green:usr"; - gpios = <&pio 7 7 0>; + gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; }; }; reg_ahci_5v: ahci-5v { pinctrl-0 = <&ahci_pwr_pin_cubietruck>; - gpio = <&pio 7 12 0>; + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; status = "okay"; }; reg_usb0_vbus: usb0-vbus { pinctrl-0 = <&usb0_vbus_pin_a>; - gpio = <&pio 7 17 0>; + gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -215,6 +251,37 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; - gpio = <&pio 7 9 0>; + gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; }; }; + +#include "axp209.dtsi" + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index 0bcefcbbb756..86a944ce19f8 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -12,8 +12,12 @@ */ /dts-v1/; -/include/ "sun7i-a20.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Merrii A20 Hummingbird"; @@ -33,7 +37,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -78,29 +82,29 @@ ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 { allwinner,pins = "PH15"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 { allwinner,pins = "PH2"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 { allwinner,pins = "PH9"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 { allwinner,pins = "PH16"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -155,7 +159,7 @@ compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; }; @@ -192,7 +196,7 @@ phy-mode = "rgmii"; phy-supply = <®_gmac_vdd>; /* phy reset config */ - snps,reset-gpio = <&pio 0 17 0>; /* PA17 */ + snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */ snps,reset-active-low; /* wait 1s after reset, otherwise fail to read phy id */ snps,reset-delays-us = <0 10000 1000000>; @@ -206,13 +210,13 @@ reg_ahci_5v: ahci-5v { pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>; - gpio = <&pio 7 15 0>; /* PH15 */ + gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ status = "okay"; }; reg_usb1_vbus: usb1-vbus { pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>; - gpio = <&pio 7 2 0>; /* PH2 */ + gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ status = "okay"; }; @@ -228,7 +232,7 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; enable-active-high; - gpio = <&pio 7 9 0>; /* PH9 */ + gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ }; reg_gmac_vdd: gmac_vdd { @@ -239,6 +243,6 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; enable-active-high; - gpio = <&pio 7 16 0>; /* PH16 */ + gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */ }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index f38bb1a6656c..06148b4d000f 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -46,8 +46,12 @@ */ /dts-v1/; -/include/ "sun7i-a20.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "I12 / Q5 / QT840A A20 tvbox"; @@ -59,7 +63,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -98,35 +102,35 @@ pinctrl@01c20800 { mmc3_pins_a: mmc3@0 { /* AP6210 / AP6330 requires pull-up */ - allwinner,pull = <1>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; vmmc3_pin_i12_tvbox: vmmc3_pin@0 { allwinner,pins = "PH2"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 { allwinner,pins = "PH12"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; gmac_power_pin_i12_tvbox: gmac_power_pin@0 { allwinner,pins = "PH21"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; led_pins_i12_tvbox: led_pins@0 { allwinner,pins = "PH9", "PH20"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -151,7 +155,7 @@ compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; @@ -179,12 +183,12 @@ red { label = "i12_tvbox:red:usr"; - gpios = <&pio 7 9 1>; + gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; }; blue { label = "i12_tvbox:blue:usr"; - gpios = <&pio 7 20 0>; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; }; @@ -204,7 +208,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; - gpio = <&pio 7 2 0>; + gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; }; reg_vmmc3_io: vmmc3-io { @@ -217,7 +221,7 @@ /* This controls VCC-PI, must be always on! */ regulator-always-on; enable-active-high; - gpio = <&pio 7 12 0>; + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; }; reg_gmac_3v3: gmac-3v3 { @@ -229,6 +233,6 @@ regulator-max-microvolt = <3300000>; startup-delay-us = <50000>; enable-active-high; - gpio = <&pio 7 21 0>; + gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index b8e568c55271..5add9f243ec3 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -48,8 +48,12 @@ */ /dts-v1/; -/include/ "sun7i-a20.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Mele M3"; @@ -61,7 +65,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -101,8 +105,8 @@ led_pins_m3: led_pins@0 { allwinner,pins = "PH20"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -127,7 +131,7 @@ compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; @@ -154,7 +158,7 @@ blue { label = "m3:blue:usr"; - gpios = <&pio 7 20 0>; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 3f3ff9693992..12ded69d61eb 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -49,8 +49,12 @@ */ /dts-v1/; -/include/ "sun7i-a20.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A20-OLinuXino-LIME"; @@ -62,7 +66,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -98,15 +102,15 @@ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { allwinner,pins = "PC3"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; led_pins_olinuxinolime: led_pins@0 { allwinner,pins = "PH2"; allwinner,function = "gpio_out"; - allwinner,drive = <1>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -125,7 +129,7 @@ compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; @@ -152,14 +156,14 @@ green { label = "a20-olinuxino-lime:green:usr"; - gpios = <&pio 7 2 0>; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_ahci_5v: ahci-5v { pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; - gpio = <&pio 2 3 0>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index ed364d5e755e..260dbd3bf29d 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -46,8 +46,12 @@ */ /dts-v1/; -/include/ "sun7i-a20.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A20-OLinuXino-LIME2"; @@ -59,7 +63,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -95,15 +99,15 @@ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { allwinner,pins = "PC3"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; led_pins_olinuxinolime: led_pins@0 { allwinner,pins = "PH2"; allwinner,function = "gpio_out"; - allwinner,drive = <1>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -122,7 +126,7 @@ compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; @@ -199,14 +203,14 @@ green { label = "a20-olinuxino-lime2:green:usr"; - gpios = <&pio 7 2 0>; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_ahci_5v: ahci-5v { pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; - gpio = <&pio 2 3 0>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 66cc77707198..714e15ac5416 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -12,8 +12,13 @@ */ /dts-v1/; -/include/ "sun7i-a20.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Olimex A20-Olinuxino Micro"; @@ -39,7 +44,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -49,7 +54,7 @@ pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 11 0>; /* PH11 */ + cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ cd-inverted; status = "okay"; }; @@ -91,15 +96,69 @@ mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { allwinner,pins = "PH11"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; led_pins_olinuxino: led_pins@0 { allwinner,pins = "PH2"; allwinner,function = "gpio_out"; - allwinner,drive = <1>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + + lradc: lradc@01c22800 { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@191 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191274>; + }; + + button@392 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <392644>; + }; + + button@601 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <601151>; + }; + + button@795 { + label = "Search"; + linux,code = <KEY_SEARCH>; + channel = <0>; + voltage = <795090>; + }; + + button@987 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <987387>; + }; + + button@1184 { + label = "Esc"; + linux,code = <KEY_ESC>; + channel = <0>; + voltage = <1184678>; + }; + + button@1398 { + label = "Enter"; + linux,code = <KEY_ENTER>; + channel = <0>; + voltage = <1398804>; }; }; @@ -130,7 +189,7 @@ compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; @@ -169,7 +228,7 @@ green { label = "a20-olinuxino-micro:green:usr"; - gpios = <&pio 7 2 0>; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index 8dca49b2477b..0a2c2aeb4687 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -47,10 +47,13 @@ */ /dts-v1/; -/include/ "sun7i-a20.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "LinkSprite pcDuino3"; @@ -62,7 +65,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -102,15 +105,15 @@ led_pins_pcduino3: led_pins@0 { allwinner,pins = "PH15", "PH16"; allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; key_pins_pcduino3: key_pins@0 { allwinner,pins = "PH17", "PH18", "PH19"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -135,7 +138,7 @@ compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; - interrupts = <0 8>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; @@ -203,7 +206,7 @@ }; reg_ahci_5v: ahci-5v { - gpio = <&pio 7 2 0>; + gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 89749ce34a84..3a8530b79f1c 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -47,7 +47,13 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> + +#include <dt-bindings/dma/sun4i-a10.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&gic>; @@ -68,16 +74,49 @@ <&ahb_gates 44>; status = "disabled"; }; + + framebuffer@1 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; + clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>; + status = "disabled"; + }; + + framebuffer@2 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0-tve0"; + clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, + <&ahb_gates 44>; + status = "disabled"; + }; }; cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; + clocks = <&cpu>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1450000 + 960000 1400000 + 912000 1400000 + 864000 1300000 + 720000 1200000 + 528000 1100000 + 312000 1000000 + 144000 900000 + >; + #cooling-cells = <2>; + cooling-min-level = <0>; + cooling-max-level = <7>; }; cpu@1 { @@ -87,22 +126,54 @@ }; }; + thermal-zones { + cpu_thermal { + /* milliseconds */ + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&rtp>; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu_alert0: cpu_alert0 { + /* milliCelsius */ + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit { + /* milliCelsius */ + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + memory { reg = <0x40000000 0x80000000>; }; timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; pmu { compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; - interrupts = <0 120 4>, - <0 121 4>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; }; clocks { @@ -266,35 +337,43 @@ }; mmc0_clk: clk@01c20088 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20088 0x4>; clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0"; + clock-output-names = "mmc0", + "mmc0_output", + "mmc0_sample"; }; mmc1_clk: clk@01c2008c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c2008c 0x4>; clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1"; + clock-output-names = "mmc1", + "mmc1_output", + "mmc1_sample"; }; mmc2_clk: clk@01c20090 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20090 0x4>; clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2"; + clock-output-names = "mmc2", + "mmc2_output", + "mmc2_sample"; }; mmc3_clk: clk@01c20094 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20094 0x4>; clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc3"; + clock-output-names = "mmc3", + "mmc3_output", + "mmc3_sample"; }; ts_clk: clk@01c20098 { @@ -454,13 +533,13 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x01c00030 0x0c>; - interrupts = <0 0 4>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; }; dma: dma-controller@01c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; - interrupts = <0 27 4>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 6>; #dma-cells = <2>; }; @@ -468,10 +547,11 @@ spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; - interrupts = <0 10 4>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 27>, <&dma 1 26>; + dmas = <&dma SUN4I_DMA_DEDICATED 27>, + <&dma SUN4I_DMA_DEDICATED 26>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -481,10 +561,11 @@ spi1: spi@01c06000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c06000 0x1000>; - interrupts = <0 11 4>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 9>, <&dma 1 8>; + dmas = <&dma SUN4I_DMA_DEDICATED 9>, + <&dma SUN4I_DMA_DEDICATED 8>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -494,12 +575,12 @@ emac: ethernet@01c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; - interrupts = <0 55 4>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 17>; status = "disabled"; }; - mdio@01c0b080 { + mdio: mdio@01c0b080 { compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; status = "disabled"; @@ -510,36 +591,60 @@ mmc0: mmc@01c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, <&mmc0_clk>; - clock-names = "ahb", "mmc"; - interrupts = <0 32 4>; + clocks = <&ahb_gates 8>, + <&mmc0_clk 0>, + <&mmc0_clk 1>, + <&mmc0_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; mmc1: mmc@01c10000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&ahb_gates 9>, <&mmc1_clk>; - clock-names = "ahb", "mmc"; - interrupts = <0 33 4>; + clocks = <&ahb_gates 9>, + <&mmc1_clk 0>, + <&mmc1_clk 1>, + <&mmc1_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; mmc2: mmc@01c11000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, <&mmc2_clk>; - clock-names = "ahb", "mmc"; - interrupts = <0 34 4>; + clocks = <&ahb_gates 10>, + <&mmc2_clk 0>, + <&mmc2_clk 1>, + <&mmc2_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; mmc3: mmc@01c12000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c12000 0x1000>; - clocks = <&ahb_gates 11>, <&mmc3_clk>; - clock-names = "ahb", "mmc"; - interrupts = <0 35 4>; + clocks = <&ahb_gates 11>, + <&mmc3_clk 0>, + <&mmc3_clk 1>, + <&mmc3_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -558,7 +663,7 @@ ehci0: usb@01c14000 { compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; - interrupts = <0 39 4>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 1>; phys = <&usbphy 1>; phy-names = "usb"; @@ -568,7 +673,7 @@ ohci0: usb@01c14400 { compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; - interrupts = <0 64 4>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usb_clk 6>, <&ahb_gates 2>; phys = <&usbphy 1>; phy-names = "usb"; @@ -578,10 +683,11 @@ spi2: spi@01c17000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; - interrupts = <0 12 4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 29>, <&dma 1 28>; + dmas = <&dma SUN4I_DMA_DEDICATED 29>, + <&dma SUN4I_DMA_DEDICATED 28>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -591,7 +697,7 @@ ahci: sata@01c18000 { compatible = "allwinner,sun4i-a10-ahci"; reg = <0x01c18000 0x1000>; - interrupts = <0 56 4>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pll6 0>, <&ahb_gates 25>; status = "disabled"; }; @@ -599,7 +705,7 @@ ehci1: usb@01c1c000 { compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; reg = <0x01c1c000 0x100>; - interrupts = <0 40 4>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 3>; phys = <&usbphy 2>; phy-names = "usb"; @@ -609,7 +715,7 @@ ohci1: usb@01c1c400 { compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; reg = <0x01c1c400 0x100>; - interrupts = <0 65 4>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&usb_clk 7>, <&ahb_gates 4>; phys = <&usbphy 2>; phy-names = "usb"; @@ -619,10 +725,11 @@ spi3: spi@01c1f000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c1f000 0x1000>; - interrupts = <0 50 4>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 23>, <&spi3_clk>; clock-names = "ahb", "mod"; - dmas = <&dma 1 31>, <&dma 1 30>; + dmas = <&dma SUN4I_DMA_DEDICATED 31>, + <&dma SUN4I_DMA_DEDICATED 30>; dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; @@ -632,7 +739,7 @@ pio: pinctrl@01c20800 { compatible = "allwinner,sun7i-a20-pinctrl"; reg = <0x01c20800 0x400>; - interrupts = <0 28 4>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; @@ -643,99 +750,99 @@ pwm0_pins_a: pwm0@0 { allwinner,pins = "PB2"; allwinner,function = "pwm"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; pwm1_pins_a: pwm1@0 { allwinner,pins = "PI3"; allwinner,function = "pwm"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart0_pins_a: uart0@0 { allwinner,pins = "PB22", "PB23"; allwinner,function = "uart0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart2_pins_a: uart2@0 { allwinner,pins = "PI16", "PI17", "PI18", "PI19"; allwinner,function = "uart2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart3_pins_a: uart3@0 { allwinner,pins = "PG6", "PG7", "PG8", "PG9"; allwinner,function = "uart3"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart3_pins_b: uart3@1 { allwinner,pins = "PH0", "PH1"; allwinner,function = "uart3"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart4_pins_a: uart4@0 { allwinner,pins = "PG10", "PG11"; allwinner,function = "uart4"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart5_pins_a: uart5@0 { allwinner,pins = "PI10", "PI11"; allwinner,function = "uart5"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart6_pins_a: uart6@0 { allwinner,pins = "PI12", "PI13"; allwinner,function = "uart6"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart7_pins_a: uart7@0 { allwinner,pins = "PI20", "PI21"; allwinner,function = "uart7"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c0_pins_a: i2c0@0 { allwinner,pins = "PB0", "PB1"; allwinner,function = "i2c0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c1_pins_a: i2c1@0 { allwinner,pins = "PB18", "PB19"; allwinner,function = "i2c1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c2_pins_a: i2c2@0 { allwinner,pins = "PB20", "PB21"; allwinner,function = "i2c2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c3_pins_a: i2c3@0 { allwinner,pins = "PI0", "PI1"; allwinner,function = "i2c3"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; emac_pins_a: emac0@0 { @@ -745,22 +852,22 @@ "PA11", "PA12", "PA13", "PA14", "PA15", "PA16"; allwinner,function = "emac"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; clk_out_a_pins_a: clk_out_a@0 { allwinner,pins = "PI12"; allwinner,function = "clk_out_a"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; clk_out_b_pins_a: clk_out_b@0 { allwinner,pins = "PI13"; allwinner,function = "clk_out_b"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; gmac_pins_mii_a: gmac_mii@0 { @@ -770,8 +877,8 @@ "PA11", "PA12", "PA13", "PA14", "PA15", "PA16"; allwinner,function = "gmac"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; gmac_pins_rgmii_a: gmac_rgmii@0 { @@ -785,90 +892,104 @@ * data lines in RGMII mode use DDR mode * and need a higher signal drive strength */ - allwinner,drive = <3>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_40_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi0_pins_a: spi0@0 { allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14"; allwinner,function = "spi0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi1_pins_a: spi1@0 { allwinner,pins = "PI16", "PI17", "PI18", "PI19"; allwinner,function = "spi1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi2_pins_a: spi2@0 { allwinner,pins = "PC19", "PC20", "PC21", "PC22"; allwinner,function = "spi2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi2_pins_b: spi2@1 { allwinner,pins = "PB14", "PB15", "PB16", "PB17"; allwinner,function = "spi2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; allwinner,function = "mmc0"; - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { allwinner,pins = "PH1"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; mmc2_pins_a: mmc2@0 { allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11"; allwinner,function = "mmc2"; - allwinner,drive = <2>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; mmc3_pins_a: mmc3@0 { allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; allwinner,function = "mmc3"; - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; ir0_pins_a: ir0@0 { allwinner,pins = "PB3","PB4"; allwinner,function = "ir0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; ir1_pins_a: ir1@0 { allwinner,pins = "PB22","PB23"; allwinner,function = "ir1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + ps20_pins_a: ps20@0 { + allwinner,pins = "PI20", "PI21"; + allwinner,function = "ps2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + ps21_pins_a: ps21@0 { + allwinner,pins = "PH12", "PH13"; + allwinner,function = "ps2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; timer@01c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x90>; - interrupts = <0 22 4>, - <0 23 4>, - <0 24 4>, - <0 25 4>, - <0 67 4>, - <0 68 4>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; clocks = <&osc24M>; }; @@ -880,7 +1001,7 @@ rtc: rtc@01c20d00 { compatible = "allwinner,sun7i-a20-rtc"; reg = <0x01c20d00 0x20>; - interrupts = <0 24 4>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; }; pwm: pwm@01c20e00 { @@ -895,7 +1016,7 @@ compatible = "allwinner,sun4i-a10-ir"; clocks = <&apb0_gates 6>, <&ir0_clk>; clock-names = "apb", "ir"; - interrupts = <0 5 4>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; reg = <0x01c21800 0x40>; status = "disabled"; }; @@ -904,11 +1025,18 @@ compatible = "allwinner,sun4i-a10-ir"; clocks = <&apb0_gates 7>, <&ir1_clk>; clock-names = "apb", "ir"; - interrupts = <0 6 4>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; reg = <0x01c21c00 0x40>; status = "disabled"; }; + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200>; @@ -917,13 +1045,14 @@ rtp: rtp@01c25000 { compatible = "allwinner,sun4i-a10-ts"; reg = <0x01c25000 0x100>; - interrupts = <0 29 4>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <0>; }; uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; - interrupts = <0 1 4>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 16>; @@ -933,7 +1062,7 @@ uart1: serial@01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; - interrupts = <0 2 4>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 17>; @@ -943,7 +1072,7 @@ uart2: serial@01c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; - interrupts = <0 3 4>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 18>; @@ -953,7 +1082,7 @@ uart3: serial@01c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; - interrupts = <0 4 4>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 19>; @@ -963,7 +1092,7 @@ uart4: serial@01c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; - interrupts = <0 17 4>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 20>; @@ -973,7 +1102,7 @@ uart5: serial@01c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; - interrupts = <0 18 4>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 21>; @@ -983,7 +1112,7 @@ uart6: serial@01c29800 { compatible = "snps,dw-apb-uart"; reg = <0x01c29800 0x400>; - interrupts = <0 19 4>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 22>; @@ -993,7 +1122,7 @@ uart7: serial@01c29c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c29c00 0x400>; - interrupts = <0 20 4>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 23>; @@ -1003,7 +1132,7 @@ i2c0: i2c@01c2ac00 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; - interrupts = <0 7 4>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 0>; status = "disabled"; #address-cells = <1>; @@ -1013,7 +1142,7 @@ i2c1: i2c@01c2b000 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; - interrupts = <0 8 4>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 1>; status = "disabled"; #address-cells = <1>; @@ -1023,7 +1152,7 @@ i2c2: i2c@01c2b400 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; - interrupts = <0 9 4>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 2>; status = "disabled"; #address-cells = <1>; @@ -1033,7 +1162,7 @@ i2c3: i2c@01c2b800 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2b800 0x400>; - interrupts = <0 88 4>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 3>; status = "disabled"; #address-cells = <1>; @@ -1043,7 +1172,7 @@ i2c4: i2c@01c2c000 { compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; reg = <0x01c2c000 0x400>; - interrupts = <0 89 4>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 15>; status = "disabled"; #address-cells = <1>; @@ -1053,7 +1182,7 @@ gmac: ethernet@01c50000 { compatible = "allwinner,sun7i-a20-gmac"; reg = <0x01c50000 0x10000>; - interrupts = <0 85 4>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; clocks = <&ahb_gates 49>, <&gmac_tx_clk>; clock-names = "stmmaceth", "allwinner_gmac_tx"; @@ -1068,10 +1197,10 @@ hstimer@01c60000 { compatible = "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; - interrupts = <0 81 4>, - <0 82 4>, - <0 83 4>, - <0 84 4>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 28>; }; @@ -1083,7 +1212,23 @@ <0x01c86000 0x2000>; interrupt-controller; #interrupt-cells = <3>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + ps20: ps2@01c2a000 { + compatible = "allwinner,sun4i-a10-ps2"; + reg = <0x01c2a000 0x400>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb1_gates 6>; + status = "disabled"; + }; + + ps21: ps2@01c2a400 { + compatible = "allwinner,sun4i-a10-ps2"; + reg = <0x01c2a400 0x400>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb1_gates 7>; + status = "disabled"; }; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts new file mode 100644 index 000000000000..dd31c53e2ab6 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts @@ -0,0 +1,59 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * The Ippo Q8H v1.2 is almost identical to the v5, still it needs a separate + * dtb file since some gpio-s surrounding the wlan/bluetooth are different, + * and it uses different camera sensors. + */ + +#include "sun8i-a23-ippo-q8h-v5.dts" + +/ { + model = "Ippo Q8H Dual Core Tablet (v1.2)"; + compatible = "ippo,q8h-v1.2", "allwinner,sun8i-a23"; +}; diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index 32ad80804dbb..623573e46080 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -48,8 +48,12 @@ */ /dts-v1/; -/include/ "sun8i-a23.dtsi" -/include/ "sunxi-common-regulators.dtsi" +#include "sun8i-a23.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Ippo Q8H Dual Core Tablet (v5)"; @@ -69,7 +73,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 1 4 0>; /* PB4 */ + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ cd-inverted; status = "okay"; }; @@ -78,8 +82,27 @@ mmc0_cd_pin_q8h: mmc0_cd_pin@0 { allwinner,pins = "PB4"; allwinner,function = "gpio_in"; - allwinner,drive = <0>; - allwinner,pull = <1>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + }; + + lradc: lradc@01c22800 { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 86584fcf5e32..382ebd137ee4 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -47,11 +47,29 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&gic>; + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@0 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; + clocks = <&pll6 0>; + status = "disabled"; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -101,11 +119,19 @@ }; /* dummy clock until actually implemented */ - pll6: pll6_clk { + pll5: pll5_clk { #clock-cells = <0>; compatible = "fixed-clock"; - clock-frequency = <600000000>; - clock-output-names = "pll6"; + clock-frequency = <0>; + clock-output-names = "pll5"; + }; + + pll6: clk@01c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun6i-a31-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6", "pll6x2"; }; cpu: cpu_clk@01c20050 { @@ -131,19 +157,11 @@ clock-output-names = "axi"; }; - ahb1_mux: ahb1_mux_clk@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun6i-a31-ahb1-mux-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>; - clock-output-names = "ahb1_mux"; - }; - ahb1: ahb1_clk@01c20054 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-ahb-clk"; + compatible = "allwinner,sun6i-a31-ahb1-clk"; reg = <0x01c20054 0x4>; - clocks = <&ahb1_mux>; + clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; clock-output-names = "ahb1"; }; @@ -184,7 +202,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-a10-apb1-clk"; reg = <0x01c20058 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; + clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; clock-output-names = "apb2"; }; @@ -200,27 +218,41 @@ }; mmc0_clk: clk@01c20088 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6>; - clock-output-names = "mmc0"; + clocks = <&osc24M>, <&pll6 0>; + clock-output-names = "mmc0", + "mmc0_output", + "mmc0_sample"; }; mmc1_clk: clk@01c2008c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6>; - clock-output-names = "mmc1"; + clocks = <&osc24M>, <&pll6 0>; + clock-output-names = "mmc1", + "mmc1_output", + "mmc1_sample"; }; mmc2_clk: clk@01c20090 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6>; - clock-output-names = "mmc2"; + clocks = <&osc24M>, <&pll6 0>; + clock-output-names = "mmc2", + "mmc2_output", + "mmc2_sample"; + }; + + mbus_clk: clk@01c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-mbus-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5>; + clock-output-names = "mbus"; }; }; @@ -233,7 +265,7 @@ dma: dma-controller@01c02000 { compatible = "allwinner,sun8i-a23-dma"; reg = <0x01c02000 0x1000>; - interrupts = <0 50 4>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 6>; resets = <&ahb1_rst 6>; #dma-cells = <1>; @@ -242,42 +274,60 @@ mmc0: mmc@01c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ahb1_gates 8>, <&mmc0_clk>; - clock-names = "ahb", "mmc"; + clocks = <&ahb1_gates 8>, + <&mmc0_clk 0>, + <&mmc0_clk 1>, + <&mmc0_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; resets = <&ahb1_rst 8>; reset-names = "ahb"; - interrupts = <0 60 4>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; mmc1: mmc@01c10000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&ahb1_gates 9>, <&mmc1_clk>; - clock-names = "ahb", "mmc"; + clocks = <&ahb1_gates 9>, + <&mmc1_clk 0>, + <&mmc1_clk 1>, + <&mmc1_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; resets = <&ahb1_rst 9>; reset-names = "ahb"; - interrupts = <0 61 4>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; mmc2: mmc@01c11000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ahb1_gates 10>, <&mmc2_clk>; - clock-names = "ahb", "mmc"; + clocks = <&ahb1_gates 10>, + <&mmc2_clk 0>, + <&mmc2_clk 1>, + <&mmc2_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; resets = <&ahb1_rst 10>; reset-names = "ahb"; - interrupts = <0 62 4>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; pio: pinctrl@01c20800 { compatible = "allwinner,sun8i-a23-pinctrl"; reg = <0x01c20800 0x400>; - interrupts = <0 11 4>, - <0 15 4>, - <0 17 4>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 5>; gpio-controller; interrupt-controller; @@ -288,43 +338,43 @@ uart0_pins_a: uart0@0 { allwinner,pins = "PF2", "PF4"; allwinner,function = "uart0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; allwinner,function = "mmc0"; - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc1_pins_a: mmc1@0 { allwinner,pins = "PG0","PG1","PG2","PG3","PG4","PG5"; allwinner,function = "mmc1"; - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c0_pins_a: i2c0@0 { allwinner,pins = "PH2", "PH3"; allwinner,function = "i2c0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c1_pins_a: i2c1@0 { allwinner,pins = "PH4", "PH5"; allwinner,function = "i2c1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c2_pins_a: i2c2@0 { allwinner,pins = "PE12", "PE13"; allwinner,function = "i2c2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -349,21 +399,28 @@ timer@01c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; - interrupts = <0 18 4>, - <0 19 4>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&osc24M>; }; wdt0: watchdog@01c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; - interrupts = <0 25 4>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + }; + + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; - interrupts = <0 0 4>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 16>; @@ -376,7 +433,7 @@ uart1: serial@01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; - interrupts = <0 1 4>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 17>; @@ -389,7 +446,7 @@ uart2: serial@01c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; - interrupts = <0 2 4>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 18>; @@ -402,7 +459,7 @@ uart3: serial@01c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; - interrupts = <0 3 4>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 19>; @@ -415,7 +472,7 @@ uart4: serial@01c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; - interrupts = <0 4 4>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 20>; @@ -428,7 +485,7 @@ i2c0: i2c@01c2ac00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; - interrupts = <0 6 4>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb2_gates 0>; resets = <&apb2_rst 0>; status = "disabled"; @@ -439,7 +496,7 @@ i2c1: i2c@01c2b000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; - interrupts = <0 7 4>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb2_gates 1>; resets = <&apb2_rst 1>; status = "disabled"; @@ -450,7 +507,7 @@ i2c2: i2c@01c2b400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b400 0x400>; - interrupts = <0 8 4>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb2_gates 2>; resets = <&apb2_rst 2>; status = "disabled"; @@ -466,13 +523,14 @@ <0x01c86000 0x2000>; interrupt-controller; #interrupt-cells = <3>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; rtc: rtc@01f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; - interrupts = <0 40 4>, <0 41 4>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; }; prcm@01f01400 { @@ -522,7 +580,7 @@ r_uart: serial@01f02800 { compatible = "snps,dw-apb-uart"; reg = <0x01f02800 0x400>; - interrupts = <0 38 4>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb0_gates 4>; @@ -533,7 +591,7 @@ r_pio: pinctrl@01f02c00 { compatible = "allwinner,sun8i-a23-r-pinctrl"; reg = <0x01f02c00 0x400>; - interrupts = <0 45 4>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb0_gates 0>; resets = <&apb0_rst 0>; gpio-controller; @@ -545,8 +603,8 @@ r_uart_pins_a: r_uart@0 { allwinner,pins = "PL2", "PL3"; allwinner,function = "s_uart"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; }; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 11ec71072e81..a3fed2bdf620 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -48,7 +48,11 @@ */ /dts-v1/; -/include/ "sun9i-a80.dtsi" +#include "sun9i-a80.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Merrii A80 Optimus Board"; @@ -63,45 +67,6 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc { - pio: pinctrl@06000800 { - i2c3_pins_a: i2c3@0 { - /* Enable internal pull-up */ - allwinner,pull = <1>; - }; - - led_pins_optimus: led-pins@0 { - allwinner,pins = "PH0", "PH1"; - allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; - - uart4_pins_a: uart4@0 { - /* Enable internal pull-up */ - allwinner,pull = <1>; - }; - }; - - uart0: serial@07000000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - uart4: serial@07001000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; - status = "okay"; - }; - - i2c3: i2c@07003400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins_a>; - status = "okay"; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -111,14 +76,77 @@ led2 { label = "optimus:led2:usr"; - gpios = <&pio 7 1 0>; + gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; }; /* led3 is on PM15, in R_PIO */ led4 { label = "optimus:led4:usr"; - gpios = <&pio 7 0 0>; + gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; }; }; }; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins_a>; + status = "okay"; +}; + +&i2c3_pins_a { + /* Enable internal pull-up */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&pio { + led_pins_optimus: led-pins@0 { + allwinner,pins = "PH0", "PH1"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_optimus: mmc0_cd_pin@0 { + allwinner,pins = "PH18"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v0>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + +&uart4_pins_a { + /* Enable internal pull-up */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 9ef4438206a9..f0f6fb91f8c3 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -47,7 +47,11 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "skeleton64.dtsi" +#include "skeleton64.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&gic>; @@ -205,11 +209,50 @@ clock-output-names = "cci400"; }; + mmc0_clk: clk@06000410 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-mmc-clk"; + reg = <0x06000410 0x4>; + clocks = <&osc24M>, <&pll4>; + clock-output-names = "mmc0", "mmc0_output", + "mmc0_sample"; + }; + + mmc1_clk: clk@06000414 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-mmc-clk"; + reg = <0x06000414 0x4>; + clocks = <&osc24M>, <&pll4>; + clock-output-names = "mmc1", "mmc1_output", + "mmc1_sample"; + }; + + mmc2_clk: clk@06000418 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-mmc-clk"; + reg = <0x06000418 0x4>; + clocks = <&osc24M>, <&pll4>; + clock-output-names = "mmc2", "mmc2_output", + "mmc2_sample"; + }; + + mmc3_clk: clk@0600041c { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-mmc-clk"; + reg = <0x0600041c 0x4>; + clocks = <&osc24M>, <&pll4>; + clock-output-names = "mmc3", "mmc3_output", + "mmc3_sample"; + }; + ahb0_gates: clk@06000580 { #clock-cells = <1>; compatible = "allwinner,sun9i-a80-ahb0-gates-clk"; reg = <0x06000580 0x4>; clocks = <&ahb0>; + clock-indices = <0>, <1>, <3>, <5>, <8>, <12>, <13>, + <14>, <15>, <16>, <18>, <20>, <21>, + <22>, <23>; clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu", "ahb0_ss", "ahb0_sd", "ahb0_nand1", "ahb0_nand0", "ahb0_sdram", @@ -223,6 +266,7 @@ compatible = "allwinner,sun9i-a80-ahb1-gates-clk"; reg = <0x06000584 0x4>; clocks = <&ahb1>; + clock-indices = <0>, <1>, <17>, <21>, <22>, <23>, <24>; clock-output-names = "ahb1_usbotg", "ahb1_usbhci", "ahb1_gmac", "ahb1_msgbox", "ahb1_spinlock", "ahb1_hstimer", @@ -234,6 +278,8 @@ compatible = "allwinner,sun9i-a80-ahb2-gates-clk"; reg = <0x06000588 0x4>; clocks = <&ahb2>; + clock-indices = <0>, <1>, <2>, <4>, <5>, <7>, <8>, + <11>; clock-output-names = "ahb2_lcd0", "ahb2_lcd1", "ahb2_edp", "ahb2_csi", "ahb2_hdmi", "ahb2_de", "ahb2_mp", "ahb2_mipi_dsi"; @@ -244,6 +290,8 @@ compatible = "allwinner,sun9i-a80-apb0-gates-clk"; reg = <0x06000590 0x4>; clocks = <&apb0>; + clock-indices = <1>, <5>, <11>, <12>, <13>, <15>, + <17>, <18>, <19>; clock-output-names = "apb0_spdif", "apb0_pio", "apb0_ac97", "apb0_i2s0", "apb0_i2s1", "apb0_lradc", "apb0_gpadc", "apb0_twd", @@ -255,6 +303,8 @@ compatible = "allwinner,sun9i-a80-apb1-gates-clk"; reg = <0x06000594 0x4>; clocks = <&apb1>; + clock-indices = <0>, <1>, <2>, <3>, <4>, + <16>, <17>, <18>, <19>, <20>, <21>; clock-output-names = "apb1_i2c0", "apb1_i2c1", "apb1_i2c2", "apb1_i2c3", "apb1_i2c4", "apb1_uart0", "apb1_uart1", @@ -273,6 +323,67 @@ */ ranges = <0 0 0 0x20000000>; + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>, + <&mmc0_clk 1>, <&mmc0_clk 2>; + clock-names = "ahb", "mmc", "output", "sample"; + resets = <&mmc_config_clk 0>; + reset-names = "ahb"; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>, + <&mmc1_clk 1>, <&mmc1_clk 2>; + clock-names = "ahb", "mmc", "output", "sample"; + resets = <&mmc_config_clk 1>; + reset-names = "ahb"; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>, + <&mmc2_clk 1>, <&mmc2_clk 2>; + clock-names = "ahb", "mmc", "output", "sample"; + resets = <&mmc_config_clk 2>; + reset-names = "ahb"; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc3: mmc@01c12000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c12000 0x1000>; + clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>, + <&mmc3_clk 1>, <&mmc3_clk 2>; + clock-names = "ahb", "mmc", "output", "sample"; + resets = <&mmc_config_clk 3>; + reset-names = "ahb"; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc_config_clk: clk@01c13000 { + compatible = "allwinner,sun9i-a80-mmc-config-clk"; + reg = <0x01c13000 0x10>; + clocks = <&ahb0_gates 8>; + clock-names = "ahb"; + resets = <&ahb0_resets 8>; + reset-names = "ahb"; + #clock-cells = <1>; + #reset-cells = <1>; + clock-output-names = "mmc0_config", "mmc1_config", + "mmc2_config", "mmc3_config"; + }; + gic: interrupt-controller@01c41000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c41000 0x1000>, @@ -281,7 +392,7 @@ <0x01c46000 0x2000>; interrupt-controller; #interrupt-cells = <3>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; ahb0_resets: reset@060005a0 { @@ -317,12 +428,12 @@ timer@06000c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x06000c00 0xa0>; - interrupts = <0 18 4>, - <0 19 4>, - <0 20 4>, - <0 21 4>, - <0 22 4>, - <0 23 4>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&osc24M>; }; @@ -330,11 +441,11 @@ pio: pinctrl@06000800 { compatible = "allwinner,sun9i-a80-pinctrl"; reg = <0x06000800 0x400>; - interrupts = <0 11 4>, - <0 15 4>, - <0 16 4>, - <0 17 4>, - <0 120 4>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; @@ -345,29 +456,46 @@ i2c3_pins_a: i2c3@0 { allwinner,pins = "PG10", "PG11"; allwinner,function = "i2c3"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_pins: mmc0 { + allwinner,pins = "PF0", "PF1" ,"PF2", "PF3", + "PF4", "PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc2_8bit_pins: mmc2_8bit { + allwinner,pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", + "PC13", "PC14", "PC15"; + allwinner,function = "mmc2"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart0_pins_a: uart0@0 { allwinner,pins = "PH12", "PH13"; allwinner,function = "uart0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; uart4_pins_a: uart4@0 { allwinner,pins = "PG12", "PG13", "PG14", "PG15"; allwinner,function = "uart4"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; uart0: serial@07000000 { compatible = "snps,dw-apb-uart"; reg = <0x07000000 0x400>; - interrupts = <0 0 4>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 16>; @@ -378,7 +506,7 @@ uart1: serial@07000400 { compatible = "snps,dw-apb-uart"; reg = <0x07000400 0x400>; - interrupts = <0 1 4>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 17>; @@ -389,7 +517,7 @@ uart2: serial@07000800 { compatible = "snps,dw-apb-uart"; reg = <0x07000800 0x400>; - interrupts = <0 2 4>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 18>; @@ -400,7 +528,7 @@ uart3: serial@07000c00 { compatible = "snps,dw-apb-uart"; reg = <0x07000c00 0x400>; - interrupts = <0 3 4>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 19>; @@ -411,7 +539,7 @@ uart4: serial@07001000 { compatible = "snps,dw-apb-uart"; reg = <0x07001000 0x400>; - interrupts = <0 4 4>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 20>; @@ -422,7 +550,7 @@ uart5: serial@07001400 { compatible = "snps,dw-apb-uart"; reg = <0x07001400 0x400>; - interrupts = <0 5 4>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 21>; @@ -433,7 +561,7 @@ i2c0: i2c@07002800 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07002800 0x400>; - interrupts = <0 6 4>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 0>; resets = <&apb1_resets 0>; status = "disabled"; @@ -444,7 +572,7 @@ i2c1: i2c@07002c00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07002c00 0x400>; - interrupts = <0 7 4>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 1>; resets = <&apb1_resets 1>; status = "disabled"; @@ -455,7 +583,7 @@ i2c2: i2c@07003000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003000 0x400>; - interrupts = <0 8 4>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 2>; resets = <&apb1_resets 2>; status = "disabled"; @@ -466,7 +594,7 @@ i2c3: i2c@07003400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003400 0x400>; - interrupts = <0 9 4>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 3>; resets = <&apb1_resets 3>; status = "disabled"; @@ -477,7 +605,7 @@ i2c4: i2c@07003800 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003800 0x400>; - interrupts = <0 10 4>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 4>; resets = <&apb1_resets 4>; status = "disabled"; @@ -488,13 +616,13 @@ r_wdt: watchdog@08001000 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x08001000 0x20>; - interrupts = <0 36 4>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; }; r_uart: serial@08002800 { compatible = "snps,dw-apb-uart"; reg = <0x08002800 0x400>; - interrupts = <0 38 4>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&osc24M>; diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index d8876634f965..e02baa66b33c 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -47,39 +47,40 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/ { - soc@01c00000 { - pio: pinctrl@01c20800 { - ahci_pwr_pin_a: ahci_pwr_pin@0 { - allwinner,pins = "PB8"; - allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> - usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PB9"; - allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; +&pio { + ahci_pwr_pin_a: ahci_pwr_pin@0 { + allwinner,pins = "PB8"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; - usb1_vbus_pin_a: usb1_vbus_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; + usb0_vbus_pin_a: usb0_vbus_pin@0 { + allwinner,pins = "PB9"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; - usb2_vbus_pin_a: usb2_vbus_pin@0 { - allwinner,pins = "PH3"; - allwinner,function = "gpio_out"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; - }; + usb1_vbus_pin_a: usb1_vbus_pin@0 { + allwinner,pins = "PH6"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + usb2_vbus_pin_a: usb2_vbus_pin@0 { + allwinner,pins = "PH3"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +/ { reg_ahci_5v: ahci-5v { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -89,7 +90,7 @@ regulator-max-microvolt = <5000000>; regulator-boot-on; enable-active-high; - gpio = <&pio 1 8 0>; + gpio = <&pio 1 8 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -101,7 +102,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&pio 1 9 0>; + gpio = <&pio 1 9 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -113,7 +114,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&pio 7 6 0>; + gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -125,7 +126,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&pio 7 3 0>; + gpio = <&pio 7 3 GPIO_ACTIVE_HIGH>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 4eb540be368f..dbfaba09703a 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1673,6 +1673,13 @@ nvidia,core-pwr-off-time = <61036>; nvidia,core-power-req-active-high; nvidia,sys-clock-req-active-high; + + i2c-thermtrip { + nvidia,i2c-controller-id = <4>; + nvidia,bus-addr = <0x40>; + nvidia,reg-addr = <0x36>; + nvidia,reg-data = <0x2>; + }; }; /* Serial ATA */ diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts index 53181d310247..004e8e4e1c04 100644 --- a/arch/arm/boot/dts/tegra124-nyan-big.dts +++ b/arch/arm/boot/dts/tegra124-nyan-big.dts @@ -1131,6 +1131,8 @@ clock-names = "pll_a", "pll_a_out0", "mclk"; nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>; + nvidia,mic-det-gpios = + <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 8acf5d85c99d..e5527f742696 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -68,9 +68,9 @@ reset-names = "2d"; }; - gr3d@54140000 { + gr3d@54180000 { compatible = "nvidia,tegra20-gr3d"; - reg = <0x54140000 0x00040000>; + reg = <0x54180000 0x00040000>; clocks = <&tegra_car TEGRA20_CLK_GR3D>; resets = <&tegra_car 24>; reset-names = "3d"; @@ -130,9 +130,9 @@ status = "disabled"; }; - dsi@542c0000 { + dsi@54300000 { compatible = "nvidia,tegra20-dsi"; - reg = <0x542c0000 0x00040000>; + reg = <0x54300000 0x00040000>; clocks = <&tegra_car TEGRA20_CLK_DSI>; resets = <&tegra_car 48>; reset-names = "dsi"; @@ -140,7 +140,7 @@ }; }; - timer@50004600 { + timer@50040600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x50040600 0x20>; interrupts = <GIC_PPI 13 diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index cbf5a1ae0ca7..a1b682ea01bd 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -189,7 +189,7 @@ /* ALS and Proximity sensor */ isl29028@44 { - compatible = "isl,isl29028"; + compatible = "isil,isl29028"; reg = <0x44>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 99475f6e76a3..db4810df142c 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -225,7 +225,7 @@ }; }; - timer@50004600 { + timer@50040600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x50040600 0x20>; interrupts = <GIC_PPI 13 diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index 27d0d9c8adf3..01f40197ea13 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -252,6 +252,11 @@ #size-cells = <1>; ranges = <0 0x10000000 0x10000>; + sysreg@0 { + compatible = "arm,versatile-sysreg", "syscon"; + reg = <0x00000 0x1000>; + }; + aaci@4000 { compatible = "arm,primecell"; reg = <0x4000 0x1000>; diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts index e36c1e82fea7..b83137f66034 100644 --- a/arch/arm/boot/dts/versatile-pb.dts +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -29,6 +29,43 @@ clock-names = "apb_pclk"; }; + pci-controller@10001000 { + compatible = "arm,versatile-pci"; + device_type = "pci"; + reg = <0x10001000 0x1000 + 0x41000000 0x10000 + 0x42000000 0x100000>; + bus-range = <0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + ranges = <0x01000000 0 0x00000000 0x43000000 0 0x00010000 /* downstream I/O */ + 0x02000000 0 0x50000000 0x50000000 0 0x10000000 /* non-prefetchable memory */ + 0x42000000 0 0x60000000 0x60000000 0 0x10000000>; /* prefetchable memory */ + + interrupt-map-mask = <0x1800 0 0 7>; + interrupt-map = <0x1800 0 0 1 &sic 28 + 0x1800 0 0 2 &sic 29 + 0x1800 0 0 3 &sic 30 + 0x1800 0 0 4 &sic 27 + + 0x1000 0 0 1 &sic 27 + 0x1000 0 0 2 &sic 28 + 0x1000 0 0 3 &sic 29 + 0x1000 0 0 4 &sic 30 + + 0x0800 0 0 1 &sic 30 + 0x0800 0 0 2 &sic 27 + 0x0800 0 0 3 &sic 28 + 0x0800 0 0 4 &sic 29 + + 0x0000 0 0 1 &sic 29 + 0x0000 0 0 2 &sic 30 + 0x0000 0 0 3 &sic 27 + 0x0000 0 0 4 &sic 28>; + }; + fpga { uart@9000 { compatible = "arm,pl011", "arm,primecell"; diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index 56a452bc326c..36cafbfa1bfa 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -35,7 +35,7 @@ regulator-name = "usbh_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 19 GPIO_ACTIVE_LOW>; + gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; vin-supply = <&sys_5v0_reg>; }; }; diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index 82f5728be5c9..5c2b7320856d 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -31,7 +31,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; - cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; &fec1 { @@ -121,6 +121,7 @@ pinctrl_fec1: fec1grp { fsl,pins = < + VF610_PAD_PTA6__RMII_CLKOUT 0x30d2 VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi index de6700542714..1dbf8d2d1ddf 100644 --- a/arch/arm/boot/dts/vf500.dtsi +++ b/arch/arm/boot/dts/vf500.dtsi @@ -94,23 +94,23 @@ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; }; -&gpio1 { +&gpio0 { interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; }; -&gpio2 { +&gpio1 { interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; }; -&gpio3 { +&gpio2 { interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; }; -&gpio4 { +&gpio3 { interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; }; -&gpio5 { +&gpio4 { interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; }; @@ -130,6 +130,14 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; }; +&snvsrtc { + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; +}; + +&src { + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; +}; + &uart0 { interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; }; @@ -169,3 +177,8 @@ &usbphy1 { interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; }; + +&wdoga5 { + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index f2b64b1b00fa..f64fddce3e2a 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -123,7 +123,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; - cd-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 505969ae8093..a29c7ce15eaf 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -22,11 +22,11 @@ serial3 = &uart3; serial4 = &uart4; serial5 = &uart5; - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - gpio4 = &gpio5; + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; usbphy0 = &usbphy0; usbphy1 = &usbphy1; }; @@ -43,6 +43,13 @@ clock-frequency = <32768>; }; + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&src>; + offset = <0x0>; + mask = <0x1000>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -184,7 +191,7 @@ status = "disabled"; }; - wdog@4003e000 { + wdoga5: wdog@4003e000 { compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; reg = <0x4003e000 0x1000>; clocks = <&clks VF610_CLK_WDT>; @@ -209,7 +216,7 @@ #gpio-range-cells = <3>; }; - gpio1: gpio@40049000 { + gpio0: gpio@40049000 { compatible = "fsl,vf610-gpio"; reg = <0x40049000 0x1000 0x400ff000 0x40>; gpio-controller; @@ -219,7 +226,7 @@ gpio-ranges = <&iomuxc 0 0 32>; }; - gpio2: gpio@4004a000 { + gpio1: gpio@4004a000 { compatible = "fsl,vf610-gpio"; reg = <0x4004a000 0x1000 0x400ff040 0x40>; gpio-controller; @@ -229,7 +236,7 @@ gpio-ranges = <&iomuxc 0 32 32>; }; - gpio3: gpio@4004b000 { + gpio2: gpio@4004b000 { compatible = "fsl,vf610-gpio"; reg = <0x4004b000 0x1000 0x400ff080 0x40>; gpio-controller; @@ -239,7 +246,7 @@ gpio-ranges = <&iomuxc 0 64 32>; }; - gpio4: gpio@4004c000 { + gpio3: gpio@4004c000 { compatible = "fsl,vf610-gpio"; reg = <0x4004c000 0x1000 0x400ff0c0 0x40>; gpio-controller; @@ -249,7 +256,7 @@ gpio-ranges = <&iomuxc 0 96 32>; }; - gpio5: gpio@4004d000 { + gpio4: gpio@4004d000 { compatible = "fsl,vf610-gpio"; reg = <0x4004d000 0x1000 0x400ff100 0x40>; gpio-controller; @@ -318,6 +325,11 @@ clocks = <&clks VF610_CLK_USBC0>; status = "disabled"; }; + + src: src@4006e000 { + compatible = "fsl,vf610-src", "syscon"; + reg = <0x4006e000 0x1000>; + }; }; aips1: aips-bus@40080000 { @@ -339,6 +351,20 @@ status = "disabled"; }; + snvs0: snvs@400a7000 { + compatible = "fsl,sec-v4.0-mon", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x400a7000 0x2000>; + + snvsrtc: snvs-rtc-lp@34 { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + reg = <0x34 0x58>; + clocks = <&clks VF610_CLK_SNVS>; + clock-names = "snvs-rtc"; + }; + }; + uart4: serial@400a9000 { compatible = "fsl,vf610-lpuart"; reg = <0x400a9000 0x1000>; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index ee3e5d675b05..a5cd2eda3edf 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -237,7 +237,7 @@ slcr: slcr@f8000000 { #address-cells = <1>; #size-cells = <1>; - compatible = "xlnx,zynq-slcr", "syscon"; + compatible = "xlnx,zynq-slcr", "syscon", "simple-bus"; reg = <0xF8000000 0x1000>; ranges; clkc: clkc@100 { @@ -257,6 +257,12 @@ "dbg_trc", "dbg_apb"; reg = <0x100 0x100>; }; + + pinctrl0: pinctrl@700 { + compatible = "xlnx,pinctrl-zynq"; + reg = <0x700 0x200>; + syscon = <&slcr>; + }; }; dmac_s: dmac@f8003000 { @@ -314,14 +320,32 @@ clocks = <&clkc 4>; }; + usb0: usb@e0002000 { + compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2"; + status = "disabled"; + clocks = <&clkc 28>; + interrupt-parent = <&intc>; + interrupts = <0 21 4>; + reg = <0xe0002000 0x1000>; + phy_type = "ulpi"; + }; + + usb1: usb@e0003000 { + compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2"; + status = "disabled"; + clocks = <&clkc 29>; + interrupt-parent = <&intc>; + interrupts = <0 44 4>; + reg = <0xe0003000 0x1000>; + phy_type = "ulpi"; + }; + watchdog0: watchdog@f8005000 { clocks = <&clkc 45>; - compatible = "xlnx,zynq-wdt-r1p2"; - device_type = "watchdog"; + compatible = "cdns,wdt-r1p2"; interrupt-parent = <&intc>; interrupts = <0 9 1>; reg = <0xf8005000 0x1000>; - reset = <0>; timeout-sec = <10>; }; }; diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index ab1dc0a56cdd..174571232ea5 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -58,7 +58,7 @@ status = "okay"; isl9305: isl9305@68 { - compatible = "isl,isl9305"; + compatible = "isil,isl9305"; reg = <0x68>; regulators { diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 280f02dd4ddc..1fc1d3911e9b 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -18,6 +18,12 @@ model = "Zynq ZC702 Development Board"; compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000"; + aliases { + ethernet0 = &gem0; + i2c0 = &i2c0; + serial0 = &uart1; + }; + memory { device_type = "memory"; reg = <0x0 0x40000000>; @@ -36,10 +42,17 @@ linux,default-trigger = "heartbeat"; }; }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; }; &can0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_default>; }; &clkc { @@ -50,15 +63,24 @@ status = "okay"; phy-mode = "rgmii-id"; phy-handle = <ðernet_phy>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem0_default>; ethernet_phy: ethernet-phy@7 { reg = <7>; }; }; +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio0_default>; +}; + &i2c0 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; i2cswitch@74 { compatible = "nxp,pca9548"; @@ -132,10 +154,212 @@ }; }; +&pinctrl0 { + pinctrl_can0_default: can0-default { + mux { + function = "can0"; + groups = "can0_9_grp"; + }; + + conf { + groups = "can0_9_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO46"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO47"; + bias-disable; + }; + }; + + pinctrl_gem0_default: gem0-default { + mux { + function = "ethernet0"; + groups = "ethernet0_0_grp"; + }; + + conf { + groups = "ethernet0_0_grp"; + slew-rate = <0>; + io-standard = <4>; + }; + + conf-rx { + pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio0"; + groups = "mdio0_0_grp"; + }; + + conf-mdio { + groups = "mdio0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + bias-disable; + }; + }; + + pinctrl_gpio0_default: gpio0-default { + mux { + function = "gpio0"; + groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp", + "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp", + "gpio0_13_grp", "gpio0_14_grp"; + }; + + conf { + groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp", + "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp", + "gpio0_13_grp", "gpio0_14_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-pull-up { + pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14"; + bias-pull-up; + }; + + conf-pull-none { + pins = "MIO7", "MIO8"; + bias-disable; + }; + }; + + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_10_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_10_grp"; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + }; + + pinctrl_sdhci0_default: sdhci0-default { + mux { + groups = "sdio0_2_grp"; + function = "sdio0"; + }; + + conf { + groups = "sdio0_2_grp"; + slew-rate = <0>; + io-standard = <1>; + bias-disable; + }; + + mux-cd { + groups = "gpio0_0_grp"; + function = "sdio0_cd"; + }; + + conf-cd { + groups = "gpio0_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + + mux-wp { + groups = "gpio0_15_grp"; + function = "sdio0_wp"; + }; + + conf-wp { + groups = "gpio0_15_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_10_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_10_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO49"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO48"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO29", "MIO31", "MIO36"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34", + "MIO35", "MIO37", "MIO38", "MIO39"; + bias-disable; + }; + }; +}; + &sdhci0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; }; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 34f7812d2ee8..850518d9b8ac 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -18,6 +18,12 @@ model = "Zynq ZC706 Development Board"; compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000"; + aliases { + ethernet0 = &gem0; + i2c0 = &i2c0; + serial0 = &uart1; + }; + memory { device_type = "memory"; reg = <0x0 0x40000000>; @@ -27,6 +33,10 @@ bootargs = "console=ttyPS0,115200 earlyprintk"; }; + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; }; &clkc { @@ -37,15 +47,24 @@ status = "okay"; phy-mode = "rgmii-id"; phy-handle = <ðernet_phy>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem0_default>; ethernet_phy: ethernet-phy@7 { reg = <7>; }; }; +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio0_default>; +}; + &i2c0 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; i2cswitch@74 { compatible = "nxp,pca9548"; @@ -111,10 +130,185 @@ }; }; +&pinctrl0 { + pinctrl_gem0_default: gem0-default { + mux { + function = "ethernet0"; + groups = "ethernet0_0_grp"; + }; + + conf { + groups = "ethernet0_0_grp"; + slew-rate = <0>; + io-standard = <4>; + }; + + conf-rx { + pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21"; + low-power-enable; + bias-disable; + }; + + mux-mdio { + function = "mdio0"; + groups = "mdio0_0_grp"; + }; + + conf-mdio { + groups = "mdio0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + bias-disable; + }; + }; + + pinctrl_gpio0_default: gpio0-default { + mux { + function = "gpio0"; + groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp"; + }; + + conf { + groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-pull-up { + pins = "MIO46", "MIO47"; + bias-pull-up; + }; + + conf-pull-none { + pins = "MIO7"; + bias-disable; + }; + }; + + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_10_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_10_grp"; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + }; + + pinctrl_sdhci0_default: sdhci0-default { + mux { + groups = "sdio0_2_grp"; + function = "sdio0"; + }; + + conf { + groups = "sdio0_2_grp"; + slew-rate = <0>; + io-standard = <1>; + bias-disable; + }; + + mux-cd { + groups = "gpio0_14_grp"; + function = "sdio0_cd"; + }; + + conf-cd { + groups = "gpio0_14_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + + mux-wp { + groups = "gpio0_15_grp"; + function = "sdio0_wp"; + }; + + conf-wp { + groups = "gpio0_15_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <0>; + io-standard = <1>; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_10_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_10_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO49"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO48"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO29", "MIO31", "MIO36"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34", + "MIO35", "MIO37", "MIO38", "MIO39"; + bias-disable; + }; + }; +}; + &sdhci0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; }; diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index 1c7cc990b47a..5658bc8434de 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -18,6 +18,11 @@ model = "Zynq Zed Development Board"; compatible = "xlnx,zynq-zed", "xlnx,zynq-7000"; + aliases { + ethernet0 = &gem0; + serial0 = &uart1; + }; + memory { device_type = "memory"; reg = <0x0 0x20000000>; @@ -27,6 +32,10 @@ bootargs = "console=ttyPS0,115200 earlyprintk"; }; + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; }; &clkc { @@ -50,3 +59,9 @@ &uart1 { status = "okay"; }; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; +}; diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index a67375f24b21..811e72bbe642 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -15,15 +15,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_AT91=y CONFIG_SOC_AT91RM9200=y -CONFIG_SOC_AT91SAM9260=y -CONFIG_SOC_AT91SAM9261=y -CONFIG_SOC_AT91SAM9263=y -CONFIG_SOC_AT91SAM9RL=y -CONFIG_SOC_AT91SAM9G45=y -CONFIG_SOC_AT91SAM9X5=y -CONFIG_SOC_AT91SAM9N12=y -CONFIG_MACH_AT91RM9200_DT=y -CONFIG_MACH_AT91SAM9_DT=y +CONFIG_SOC_AT91SAM9=y CONFIG_AT91_TIMER_HZ=128 CONFIG_AEABI=y CONFIG_UACCESS_WITH_MEMCPY=y @@ -78,6 +70,7 @@ CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y +CONFIG_ARM_AT91_ETHER=y CONFIG_MACB=y # CONFIG_NET_VENDOR_BROADCOM is not set CONFIG_DM9000=y diff --git a/arch/arm/configs/efm32_defconfig b/arch/arm/configs/efm32_defconfig index f59fffb3d0c6..c4c17e3a8e1a 100644 --- a/arch/arm/configs/efm32_defconfig +++ b/arch/arm/configs/efm32_defconfig @@ -17,7 +17,6 @@ CONFIG_EMBEDDED=y # CONFIG_IOSCHED_CFQ is not set # CONFIG_MMU is not set CONFIG_ARCH_EFM32=y -# CONFIG_KUSER_HELPERS is not set CONFIG_SET_MEM_PARAM=y CONFIG_DRAM_BASE=0x88000000 CONFIG_DRAM_SIZE=0x00400000 @@ -49,7 +48,6 @@ CONFIG_MTD=y CONFIG_MTD_BLOCK_RO=y CONFIG_MTD_ROM=y CONFIG_MTD_UCLINUX=y -CONFIG_PROC_DEVICETREE=y # CONFIG_BLK_DEV is not set CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_ARC is not set @@ -78,6 +76,9 @@ CONFIG_SERIAL_NONSTANDARD=y CONFIG_SERIAL_EFM32_UART=y CONFIG_SERIAL_EFM32_UART_CONSOLE=y # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_EFM32=y CONFIG_SPI=y CONFIG_SPI_EFM32=y CONFIG_GPIO_SYSFS=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 3d0c5d65c741..1d8935359fd0 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -1,4 +1,5 @@ CONFIG_SYSVIPC=y +CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_CGROUPS=y @@ -83,6 +84,10 @@ CONFIG_I2C_S3C2410=y CONFIG_DEBUG_GPIO=y CONFIG_POWER_SUPPLY=y CONFIG_BATTERY_SBS=y +CONFIG_BATTERY_MAX17040=y +CONFIG_BATTERY_MAX17042=y +CONFIG_CHARGER_MAX14577=y +CONFIG_CHARGER_MAX77693=y CONFIG_CHARGER_TPS65090=y CONFIG_HWMON=y CONFIG_SENSORS_LM90=y @@ -94,6 +99,7 @@ CONFIG_S3C2410_WATCHDOG=y CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_I2C=y CONFIG_MFD_CROS_EC_SPI=y +CONFIG_MFD_MAX14577=y CONFIG_MFD_MAX77686=y CONFIG_MFD_MAX77693=y CONFIG_MFD_MAX8997=y @@ -102,6 +108,7 @@ CONFIG_MFD_TPS65090=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_MAX14577=y CONFIG_REGULATOR_MAX8997=y CONFIG_REGULATOR_MAX77686=y CONFIG_REGULATOR_MAX77802=y @@ -168,6 +175,9 @@ CONFIG_COMMON_CLK_MAX77686=y CONFIG_COMMON_CLK_MAX77802=y CONFIG_COMMON_CLK_S2MPS11=y CONFIG_EXYNOS_IOMMU=y +CONFIG_EXTCON=y +CONFIG_EXTCON_MAX14577=y +CONFIG_EXTCON_MAX77693=y CONFIG_IIO=y CONFIG_EXYNOS_ADC=y CONFIG_PWM=y @@ -198,6 +208,7 @@ CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y +CONFIG_LOCKUP_DETECTOR=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_USER=y CONFIG_CRYPTO_SHA256=y diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig index 112543665dd7..c34da5878b6c 100644 --- a/arch/arm/configs/hisi_defconfig +++ b/arch/arm/configs/hisi_defconfig @@ -8,6 +8,7 @@ CONFIG_ARCH_HI3xxx=y CONFIG_PARTITION_ADVANCED=y CONFIG_CMDLINE_PARTITION=y CONFIG_ARCH_HIX5HD2=y +CONFIG_ARCH_HIP01=y CONFIG_ARCH_HIP04=y CONFIG_SMP=y CONFIG_NR_CPUS=16 diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 7c2075a07eba..cf1e71e2f60a 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -97,6 +97,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_GPMI_NAND=y CONFIG_MTD_NAND_MXC=y CONFIG_MTD_SPI_NOR=y +CONFIG_SPI_FSL_QUADSPI=y CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y @@ -129,6 +130,11 @@ CONFIG_SMC911X=y CONFIG_SMSC911X=y # CONFIG_NET_VENDOR_STMICRO is not set CONFIG_AT803X_PHY=y +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_CDC_EEM=m CONFIG_BRCMFMAC=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y @@ -163,13 +169,14 @@ CONFIG_SPI_IMX=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_MC9S08DZ60=y CONFIG_GPIO_STMPE=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_IMX=y +CONFIG_POWER_RESET_SYSCON=y CONFIG_SENSORS_GPIO_FAN=y CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y CONFIG_IMX_THERMAL=y -CONFIG_POWER_SUPPLY=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_IMX=y CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y CONFIG_MFD_DA9052_I2C=y @@ -189,6 +196,8 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_RC_SUPPORT=y CONFIG_RC_DEVICES=y CONFIG_IR_GPIO_CIR=y +CONFIG_MEDIA_USB_SUPPORT=y +CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SOC_CAMERA=y CONFIG_VIDEO_MX3=y @@ -198,16 +207,17 @@ CONFIG_SOC_CAMERA_OV2640=y CONFIG_IMX_IPUV3_CORE=y CONFIG_DRM=y CONFIG_DRM_PANEL_SIMPLE=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y CONFIG_LCD_PLATFORM=y +CONFIG_FB_MXS=y CONFIG_BACKLIGHT_PWM=y CONFIG_BACKLIGHT_GPIO=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y +CONFIG_SND_USB_AUDIO=m CONFIG_SND_SOC=y CONFIG_SND_SOC_FSL_SAI=y CONFIG_SND_IMX_SOC=y @@ -226,11 +236,32 @@ CONFIG_USB_STORAGE=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_EHSET_TEST_FIXTURE=m CONFIG_NOP_USB_XCEIV=y CONFIG_USB_MXS_PHY=y CONFIG_USB_GADGET=y +CONFIG_USB_CONFIGFS=m +CONFIG_USB_CONFIGFS_SERIAL=y +CONFIG_USB_CONFIGFS_ACM=y +CONFIG_USB_CONFIGFS_OBEX=y +CONFIG_USB_CONFIGFS_NCM=y +CONFIG_USB_CONFIGFS_ECM=y +CONFIG_USB_CONFIGFS_ECM_SUBSET=y +CONFIG_USB_CONFIGFS_RNDIS=y +CONFIG_USB_CONFIGFS_EEM=y +CONFIG_USB_CONFIGFS_MASS_STORAGE=y +CONFIG_USB_CONFIGFS_F_LB_SS=y +CONFIG_USB_CONFIGFS_F_FS=y +CONFIG_USB_ZERO=m CONFIG_USB_ETH=m +CONFIG_USB_G_NCM=m +CONFIG_USB_GADGETFS=m CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig index 4f2ec3ac138e..c3058da631da 100644 --- a/arch/arm/configs/iop32x_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -106,6 +106,7 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_UART_8250=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_CRYPTO_NULL=y diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig index aa36128abca2..713faeee8cf4 100644 --- a/arch/arm/configs/iop33x_defconfig +++ b/arch/arm/configs/iop33x_defconfig @@ -87,5 +87,6 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_UART_8250=y # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRC32 is not set diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index 1af665e847d1..24636cfdf6df 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -202,3 +202,4 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_UART_8250=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index a2067cbfe173..f8a1c8f2c7c4 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -201,3 +201,4 @@ CONFIG_KEYSTONE_IRQ=y CONFIG_GPIO_SYSCON=y CONFIG_TI_DAVINCI_MDIO=y CONFIG_MARVELL_PHY=y +CONFIG_DEVTMPFS=y diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig index 5d63fc5d2d48..23e8d146dc16 100644 --- a/arch/arm/configs/kzm9g_defconfig +++ b/arch/arm/configs/kzm9g_defconfig @@ -126,8 +126,8 @@ CONFIG_DMADEVICES=y CONFIG_SH_DMAE=y CONFIG_ASYNC_TX_DMA=y CONFIG_STAGING=y -CONFIG_SENSORS_AK8975=y CONFIG_IIO=y +CONFIG_AK8975=y # CONFIG_DNOTIFY is not set CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/lager_defconfig b/arch/arm/configs/lager_defconfig deleted file mode 100644 index a82afc916a89..000000000000 --- a/arch/arm/configs/lager_defconfig +++ /dev/null @@ -1,150 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_EMBEDDED=y -CONFIG_PERF_EVENTS=y -CONFIG_SLAB=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE_LEGACY=y -CONFIG_ARCH_R8A7790=y -CONFIG_MACH_LAGER=y -# CONFIG_SH_TIMER_TMU is not set -# CONFIG_EM_TIMER_STI is not set -CONFIG_ARM_ERRATA_430973=y -CONFIG_ARM_ERRATA_458693=y -CONFIG_ARM_ERRATA_460075=y -CONFIG_ARM_ERRATA_743622=y -CONFIG_ARM_ERRATA_754322=y -CONFIG_PCI=y -CONFIG_PCI_RCAR_GEN2=y -CONFIG_PCI_RCAR_GEN2_PCIE=y -CONFIG_HAVE_ARM_ARCH_TIMER=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_FORCE_MAX_ZONEORDER=13 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_KEXEC=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_VFP=y -CONFIG_NEON=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_MTD=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_SPI_NOR=y -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_SATA_RCAR=y -CONFIG_NETDEVICES=y -# CONFIG_NET_CORE is not set -# CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set -# CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CIRRUS is not set -# CONFIG_NET_VENDOR_FARADAY is not set -# CONFIG_NET_VENDOR_INTEL is not set -# CONFIG_NET_VENDOR_MARVELL is not set -# CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_NATSEMI is not set -CONFIG_SH_ETH=y -# CONFIG_NET_VENDOR_SEEQ is not set -# CONFIG_NET_VENDOR_SMSC is not set -# CONFIG_NET_VENDOR_STMICRO is not set -# CONFIG_NET_VENDOR_VIA is not set -# CONFIG_NET_VENDOR_WIZNET is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=10 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C_GPIO=y -CONFIG_I2C_SH_MOBILE=y -CONFIG_I2C_RCAR=y -CONFIG_SPI=y -CONFIG_SPI_RSPI=y -CONFIG_SPI_SH_MSIOF=y -CONFIG_GPIO_SH_PFC=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_RCAR=y -# CONFIG_HWMON is not set -CONFIG_THERMAL=y -CONFIG_RCAR_THERMAL=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_DA9210=y -CONFIG_REGULATOR_GPIO=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_SOC_CAMERA=y -CONFIG_SOC_CAMERA_PLATFORM=y -CONFIG_VIDEO_RCAR_VIN=y -# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set -CONFIG_VIDEO_ADV7180=y -CONFIG_DRM=y -CONFIG_DRM_RCAR_DU=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_SOC=y -CONFIG_SND_SOC_RCAR=y -# CONFIG_USB_SUPPORT is not set -CONFIG_MMC=y -CONFIG_MMC_SDHI=y -CONFIG_MMC_SH_MMCIF=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_RTC_CLASS=y -CONFIG_DMADEVICES=y -CONFIG_SH_DMAE=y -# CONFIG_IOMMU_SUPPORT is not set -# CONFIG_DNOTIFY is not set -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFS_V4_1=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_ARM_UNWIND is not set -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index 9f56ca3985ae..c100b7df5441 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -204,6 +204,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_FTRACE is not set # CONFIG_ARM_UNWIND is not set CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_UART_8250=y CONFIG_EARLY_PRINTK=y CONFIG_CRYPTO_ANSI_CPRNG=y # CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index bc393b7e5ece..06075b6d2463 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -32,6 +32,7 @@ CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_HISI=y CONFIG_ARCH_HI3xxx=y CONFIG_ARCH_HIX5HD2=y +CONFIG_ARCH_HIP01=y CONFIG_ARCH_HIP04=y CONFIG_ARCH_KEYSTONE=y CONFIG_ARCH_MESON=y @@ -60,6 +61,18 @@ CONFIG_MACH_SPEAR1310=y CONFIG_MACH_SPEAR1340=y CONFIG_ARCH_STI=y CONFIG_ARCH_EXYNOS=y +CONFIG_EXYNOS5420_MCPM=y +CONFIG_ARCH_SHMOBILE_MULTI=y +CONFIG_ARCH_EMEV2=y +CONFIG_ARCH_R7S72100=y +CONFIG_ARCH_R8A73A4=y +CONFIG_ARCH_R8A7740=y +CONFIG_ARCH_R8A7779=y +CONFIG_ARCH_R8A7790=y +CONFIG_ARCH_R8A7791=y +CONFIG_ARCH_R8A7794=y +CONFIG_ARCH_SH73A0=y +CONFIG_MACH_MARZEN=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_SIRF=y CONFIG_ARCH_TEGRA=y @@ -78,12 +91,15 @@ CONFIG_ARCH_WM8850=y CONFIG_ARCH_ZYNQ=y CONFIG_TRUSTED_FOUNDATIONS=y CONFIG_PCI=y +CONFIG_PCI_KEYSTONE=y CONFIG_PCI_MSI=y CONFIG_PCI_MVEBU=y CONFIG_PCI_TEGRA=y +CONFIG_PCI_RCAR_GEN2=y +CONFIG_PCI_RCAR_GEN2_PCIE=y CONFIG_PCIEPORTBUS=y CONFIG_SMP=y -CONFIG_NR_CPUS=8 +CONFIG_NR_CPUS=16 CONFIG_HIGHPTE=y CONFIG_CMA=y CONFIG_ARM_APPENDED_DTB=y @@ -127,11 +143,13 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 CONFIG_OMAP_OCP2SCP=y +CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_DAVINCI=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y @@ -153,6 +171,7 @@ CONFIG_AHCI_SUNXI=y CONFIG_AHCI_TEGRA=y CONFIG_SATA_HIGHBANK=y CONFIG_SATA_MV=y +CONFIG_SATA_RCAR=y CONFIG_NETDEVICES=y CONFIG_HIX5HD2_GMAC=y CONFIG_SUN4I_EMAC=y @@ -163,14 +182,17 @@ CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y CONFIG_KS8851=y CONFIG_R8169=y +CONFIG_SH_ETH=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y CONFIG_TI_CPSW=y CONFIG_XILINX_EMACLITE=y CONFIG_AT803X_PHY=y CONFIG_MARVELL_PHY=y +CONFIG_SMSC_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y +CONFIG_MICREL_PHY=y CONFIG_USB_PEGASUS=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y @@ -188,13 +210,19 @@ CONFIG_KEYBOARD_CROS_EC=y CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y +CONFIG_TOUCHSCREEN_ST1232=m CONFIG_TOUCHSCREEN_STMPE=y +CONFIG_TOUCHSCREEN_SUN4I=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y +CONFIG_INPUT_AXP20X_PEK=y +CONFIG_INPUT_ADXL34X=m CONFIG_SERIO_AMBAKMI=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_8250_EM=y +CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_MESON=y @@ -206,6 +234,9 @@ CONFIG_SERIAL_SIRFSOC_CONSOLE=y CONFIG_SERIAL_TEGRA=y CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=20 +CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_SERIAL_VT8500=y @@ -220,23 +251,32 @@ CONFIG_SERIAL_FSL_LPUART_CONSOLE=y CONFIG_SERIAL_ST_ASC=y CONFIG_SERIAL_ST_ASC_CONSOLE=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_DAVINCI=y CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_CADENCE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_I2C_GPIO=m CONFIG_I2C_EXYNOS5=y CONFIG_I2C_MV64XXX=y +CONFIG_I2C_RIIC=y CONFIG_I2C_S3C2410=y +CONFIG_I2C_SH_MOBILE=y CONFIG_I2C_SIRF=y -CONFIG_I2C_TEGRA=y CONFIG_I2C_ST=y -CONFIG_SPI=y +CONFIG_I2C_TEGRA=y CONFIG_I2C_XILINX=y +CONFIG_I2C_RCAR=y +CONFIG_SPI=y CONFIG_SPI_CADENCE=y +CONFIG_SPI_DAVINCI=y CONFIG_SPI_OMAP24XX=y CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y +CONFIG_SPI_RSPI=y +CONFIG_SPI_SH_MSIOF=m +CONFIG_SPI_SH_HSPI=y CONFIG_SPI_SIRF=y CONFIG_SPI_SUN4I=y CONFIG_SPI_SUN6I=y @@ -250,24 +290,34 @@ CONFIG_PINCTRL_PALMAS=y CONFIG_PINCTRL_APQ8084=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_DWAPB=y +CONFIG_GPIO_EM=y +CONFIG_GPIO_RCAR=y CONFIG_GPIO_XILINX=y CONFIG_GPIO_ZYNQ=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y +CONFIG_GPIO_PCF857X=y CONFIG_GPIO_TWL4030=y CONFIG_GPIO_PALMAS=y +CONFIG_GPIO_SYSCON=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y CONFIG_BATTERY_SBS=y CONFIG_CHARGER_TPS65090=y CONFIG_POWER_RESET_AS3722=y CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_RESET_KEYSTONE=y CONFIG_POWER_RESET_SUN6I=y +CONFIG_POWER_RESET_RMOBILE=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM95245=y CONFIG_THERMAL=y +CONFIG_CPU_THERMAL=y +CONFIG_RCAR_THERMAL=y CONFIG_ARMADA_THERMAL=y +CONFIG_DAVINCI_WATCHDOG CONFIG_ST_THERMAL_SYSCFG=y CONFIG_ST_THERMAL_MEMMAP=y CONFIG_WATCHDOG=y @@ -276,8 +326,10 @@ CONFIG_ARM_SP805_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y CONFIG_MESON_WATCHDOG=y +CONFIG_MFD_AS3711=y CONFIG_MFD_AS3722=y CONFIG_MFD_BCM590XX=y +CONFIG_MFD_AXP20X=y CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_SPI=y CONFIG_MFD_MAX77686=y @@ -289,12 +341,16 @@ CONFIG_MFD_TPS65090=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y CONFIG_REGULATOR_AB8500=y +CONFIG_REGULATOR_AS3711=y CONFIG_REGULATOR_AS3722=y +CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_BCM590XX=y +CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_GPIO=y CONFIG_MFD_SYSCON=y CONFIG_POWER_RESET_SYSCON=y CONFIG_REGULATOR_MAX8907=y +CONFIG_REGULATOR_MAX8973=y CONFIG_REGULATOR_MAX77686=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_S2MPS11=y @@ -308,18 +364,32 @@ CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_VEXPRESS=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=y CONFIG_USB_GSPCA=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_SOC_CAMERA=m +CONFIG_SOC_CAMERA_PLATFORM=m +CONFIG_VIDEO_RCAR_VIN=m +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_RENESAS_VSP1=m +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_VIDEO_ADV7180=m CONFIG_DRM=y +CONFIG_DRM_RCAR_DU=m CONFIG_DRM_TEGRA=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_FB_ARMCLCD=y CONFIG_FB_WM8505=y +CONFIG_FB_SH_MOBILE_LCDC=y CONFIG_FB_SIMPLE=y +CONFIG_FB_SH_MOBILE_MERAM=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y +CONFIG_BACKLIGHT_AS3711=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_SOUND=y @@ -327,6 +397,8 @@ CONFIG_SND=y CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_USB_AUDIO=y CONFIG_SND_SOC=y +CONFIG_SND_SOC_SH4_FSI=m +CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_TEGRA=y CONFIG_SND_SOC_TEGRA_RT5640=y CONFIG_SND_SOC_TEGRA_WM8753=y @@ -334,6 +406,8 @@ CONFIG_SND_SOC_TEGRA_WM8903=y CONFIG_SND_SOC_TEGRA_TRIMSLICE=y CONFIG_SND_SOC_TEGRA_ALC5632=y CONFIG_SND_SOC_TEGRA_MAX98090=y +CONFIG_SND_SOC_AK4642=m +CONFIG_SND_SOC_WM8978=m CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_MVEBU=y @@ -346,16 +420,24 @@ CONFIG_USB_ISP1760_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_STI=y CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_R8A66597_HCD=m +CONFIG_USB_RENESAS_USBHS=m CONFIG_USB_STORAGE=y +CONFIG_USB_DWC3=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y CONFIG_AB8500_USB=y +CONFIG_KEYSTONE_USB_PHY=y CONFIG_OMAP_USB3=y CONFIG_SAMSUNG_USB2PHY=y CONFIG_SAMSUNG_USB3PHY=y CONFIG_USB_GPIO_VBUS=y CONFIG_USB_ISP1301=y CONFIG_USB_MXS_PHY=y +CONFIG_USB_RCAR_PHY=m +CONFIG_USB_RCAR_GEN2_PHY=m +CONFIG_USB_GADGET=y +CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_ARMMMCI=y @@ -374,12 +456,14 @@ CONFIG_MMC_SDHCI_ST=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_MMC_MVSDIO=y -CONFIG_MMC_SUNXI=y +CONFIG_MMC_SDHI=y CONFIG_MMC_DW=y CONFIG_MMC_DW_IDMAC=y CONFIG_MMC_DW_PLTFM=y CONFIG_MMC_DW_EXYNOS=y CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SH_MMCIF=y +CONFIG_MMC_SUNXI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y @@ -403,10 +487,12 @@ CONFIG_RTC_DRV_AS3722=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_MAX8907=y CONFIG_RTC_DRV_MAX77686=y +CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_TWL4030=y CONFIG_RTC_DRV_TPS6586X=y CONFIG_RTC_DRV_TPS65910=y +CONFIG_RTC_DRV_S35390A=m CONFIG_RTC_DRV_EM3027=y CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_VT8500=y @@ -418,6 +504,9 @@ CONFIG_DMADEVICES=y CONFIG_DW_DMAC=y CONFIG_MV_XOR=y CONFIG_TEGRA20_APB_DMA=y +CONFIG_SH_DMAE=y +CONFIG_RCAR_AUDMAC_PP=m +CONFIG_RCAR_DMAC=y CONFIG_STE_DMA40=y CONFIG_SIRF_DMA=y CONFIG_TI_EDMA=y @@ -445,17 +534,21 @@ CONFIG_MSM_MMCC_8974=y CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_MEMORY=y +CONFIG_TI_AEMIF=y CONFIG_IIO=y CONFIG_XILINX_XADC=y CONFIG_AK8975=y CONFIG_PWM=y +CONFIG_PWM_RENESAS_TPU=y CONFIG_PWM_TEGRA=y CONFIG_PWM_VT8500=y CONFIG_PHY_HIX5HD2_SATA=y CONFIG_OMAP_USB2=y CONFIG_TI_PIPE3=y +CONFIG_PHY_MIPHY28LP=y CONFIG_PHY_MIPHY365X=y CONFIG_PHY_STIH41X_USB=y +CONFIG_PHY_STIH407_USB=y CONFIG_PHY_SUN4I_USB=y CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y @@ -481,3 +574,4 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_LOCKUP_DETECTOR=y CONFIG_CRYPTO_DEV_TEGRA_AES=y CONFIG_CPUFREQ_DT=y +CONFIG_KEYSTONE_IRQ=y diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index 0dae1c1f007a..85d10d2e3d66 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -132,6 +132,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_UART_8250=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index 627accea72fb..73673e95f23c 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -26,6 +26,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CPU_FREQ=y +CONFIG_CPUFREQ_DT=y CONFIG_CPU_IDLE=y CONFIG_ARM_MVEBU_V7_CPUIDLE=y CONFIG_VFP=y @@ -112,6 +113,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_S35390A=y CONFIG_RTC_DRV_MV=y +CONFIG_RTC_DRV_ARMADA38X=y CONFIG_DMADEVICES=y CONFIG_MV_XOR=y # CONFIG_IOMMU_SUPPORT is not set diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 667d9d52aa01..8e108599e1af 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -13,7 +13,6 @@ CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y CONFIG_CGROUP_CPUACCT=y -CONFIG_RESOURCE_COUNTERS=y CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y CONFIG_MEMCG_KMEM=y @@ -103,16 +102,19 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_DMA_CMA=y CONFIG_OMAP_OCP2SCP=y -CONFIG_CONNECTOR=y +CONFIG_CONNECTOR=m CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_OOPS=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ECC_BCH=y CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_OMAP_BCH=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_OMAP2=y @@ -122,14 +124,12 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 CONFIG_SENSORS_TSL2550=m CONFIG_BMP085_I2C=m -CONFIG_SENSORS_LIS3_I2C=m CONFIG_SRAM=y -CONFIG_SCSI=y +CONFIG_SENSORS_LIS3_I2C=m CONFIG_BLK_DEV_SD=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_ATA=y CONFIG_SATA_AHCI_PLATFORM=y -CONFIG_MD=y CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_ARC is not set # CONFIG_NET_CADENCE is not set @@ -149,16 +149,19 @@ CONFIG_KS8851_MLL=y CONFIG_SMC91X=y CONFIG_SMSC911X=y # CONFIG_NET_VENDOR_STMICRO is not set +CONFIG_TI_DAVINCI_EMAC=y CONFIG_TI_CPSW=y # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set CONFIG_AT803X_PHY=y CONFIG_SMSC_PHY=y -CONFIG_USB_USBNET=y -CONFIG_USB_NET_SMSC95XX=y +CONFIG_USB_USBNET=m +CONFIG_USB_NET_SMSC95XX=m CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y CONFIG_USB_EPSON2888=y +CONFIG_USB_EHCI_HCD=m +CONFIG_USB_OHCI_HCD=m CONFIG_USB_KC2190=y CONFIG_LIBERTAS=m CONFIG_LIBERTAS_USB=m @@ -172,18 +175,24 @@ CONFIG_WLCORE_SDIO=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_SDIO=m CONFIG_MWIFIEX_USB=m -CONFIG_INPUT_JOYDEV=y -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_GPIO=y +CONFIG_INPUT_JOYDEV=m +CONFIG_INPUT_EVDEV=m +CONFIG_KEYBOARD_ATKBD=m +CONFIG_KEYBOARD_GPIO=m CONFIG_KEYBOARD_MATRIX=m -CONFIG_KEYBOARD_TWL4030=y +CONFIG_KEYBOARD_OMAP4=m +CONFIG_KEYBOARD_TWL4030=m +# CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=m CONFIG_TOUCHSCREEN_EDT_FT5X06=m CONFIG_TOUCHSCREEN_TSC2005=m CONFIG_TOUCHSCREEN_TSC2007=m CONFIG_INPUT_MISC=y -CONFIG_INPUT_TWL4030_PWRBUTTON=y +CONFIG_INPUT_TPS65218_PWRBUTTON=m +CONFIG_INPUT_TWL4030_PWRBUTTON=m +CONFIG_INPUT_PALMAS_PWRBUTTON=m +CONFIG_SERIO=m # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y @@ -196,15 +205,18 @@ CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_OMAP=y CONFIG_SERIAL_OMAP_CONSOLE=y -CONFIG_HW_RANDOM=y CONFIG_I2C_CHARDEV=y CONFIG_SPI=y CONFIG_SPI_OMAP24XX=y +CONFIG_SPI_TI_QSPI=m CONFIG_PINCTRL_SINGLE=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_PCF857X=m CONFIG_GPIO_TWL4030=y -CONFIG_W1=y +CONFIG_GPIO_PALMAS=y +CONFIG_W1=m +CONFIG_HDQ_MASTER_OMAP=m CONFIG_BATTERY_BQ27x00=m CONFIG_CHARGER_ISP1704=m CONFIG_CHARGER_TWL4030=m @@ -213,20 +225,22 @@ CONFIG_CHARGER_BQ24190=m CONFIG_CHARGER_BQ24735=m CONFIG_POWER_RESET=y CONFIG_POWER_AVS=y +CONFIG_HWMON=m +CONFIG_SENSORS_GPIO_FAN=m CONFIG_SENSORS_LM75=m -CONFIG_THERMAL=y +CONFIG_SENSORS_TMP102=m +CONFIG_THERMAL=m CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_USER_SPACE=y CONFIG_CPU_THERMAL=y -CONFIG_TI_SOC_THERMAL=y +CONFIG_TI_SOC_THERMAL=m CONFIG_TI_THERMAL=y CONFIG_OMAP4_THERMAL=y CONFIG_OMAP5_THERMAL=y CONFIG_DRA752_THERMAL=y CONFIG_WATCHDOG=y -CONFIG_OMAP_WATCHDOG=y -CONFIG_TWL4030_WATCHDOG=y -CONFIG_MFD_SYSCON=y +CONFIG_OMAP_WATCHDOG=m +CONFIG_TWL4030_WATCHDOG=m CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65218=y @@ -235,6 +249,7 @@ CONFIG_TWL6040_CORE=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_PBIAS=y CONFIG_REGULATOR_TI_ABB=y +CONFIG_REGULATOR_TPS62360=m CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y CONFIG_REGULATOR_TPS65217=y @@ -289,51 +304,80 @@ CONFIG_SND_OMAP_SOC=m CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m -CONFIG_USB=y +CONFIG_HID_GENERIC=m +CONFIG_USB_HIDDEV=y +CONFIG_USB_KBD=m +CONFIG_USB_MOUSE=m +CONFIG_USB=m CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_MON=y +CONFIG_USB_MON=m CONFIG_USB_XHCI_HCD=m -CONFIG_USB_WDM=y -CONFIG_USB_STORAGE=y +CONFIG_USB_WDM=m +CONFIG_USB_STORAGE=m +CONFIG_USB_MUSB_HDRC=m +CONFIG_USB_MUSB_OMAP2PLUS=m +CONFIG_USB_MUSB_AM35X=m +CONFIG_USB_MUSB_DSPS=m CONFIG_USB_DWC3=m -CONFIG_USB_TEST=y +CONFIG_USB_TEST=m CONFIG_AM335X_PHY_USB=y -CONFIG_USB_GADGET=y +CONFIG_USB_GADGET=m CONFIG_USB_GADGET_DEBUG=y CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_CONFIGFS=m +CONFIG_USB_CONFIGFS_SERIAL=y +CONFIG_USB_CONFIGFS_ACM=y +CONFIG_USB_CONFIGFS_OBEX=y +CONFIG_USB_CONFIGFS_NCM=y +CONFIG_USB_CONFIGFS_ECM=y +CONFIG_USB_CONFIGFS_ECM_SUBSET=y +CONFIG_USB_CONFIGFS_RNDIS=y +CONFIG_USB_CONFIGFS_EEM=y +CONFIG_USB_CONFIGFS_MASS_STORAGE=y +CONFIG_USB_CONFIGFS_F_LB_SS=y +CONFIG_USB_CONFIGFS_F_FS=y +CONFIG_USB_CONFIGFS_F_UAC1=y +CONFIG_USB_CONFIGFS_F_UAC2=y +CONFIG_USB_CONFIGFS_F_MIDI=y +CONFIG_USB_CONFIGFS_F_HID=y CONFIG_USB_ZERO=m CONFIG_MMC=y CONFIG_SDIO_UART=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y +CONFIG_LEDS_CLASS=m +CONFIG_LEDS_GPIO=m CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_ONESHOT=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_ONESHOT=m +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=m CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_LEDS_TRIGGER_GPIO=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=m +CONFIG_RTC_DRV_PALMAS=m CONFIG_RTC_DRV_TWL92330=y -CONFIG_RTC_DRV_TWL4030=y -CONFIG_RTC_DRV_OMAP=y +CONFIG_RTC_DRV_TWL4030=m +CONFIG_RTC_DRV_OMAP=m CONFIG_DMADEVICES=y CONFIG_TI_EDMA=y CONFIG_DMA_OMAP=y -CONFIG_EXTCON=y -CONFIG_EXTCON_PALMAS=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXTCON=m +CONFIG_EXTCON_PALMAS=m +CONFIG_TI_EMIF=m CONFIG_PWM=y -CONFIG_PWM_TIECAP=y -CONFIG_PWM_TIEHRPWM=y -CONFIG_PWM_TWL=y -CONFIG_PWM_TWL_LED=y -CONFIG_OMAP_USB2=y +CONFIG_PWM_TIECAP=m +CONFIG_PWM_TIEHRPWM=m +CONFIG_PWM_TWL=m +CONFIG_PWM_TWL_LED=m +CONFIG_OMAP_USB2=m CONFIG_TI_PIPE3=y +CONFIG_TWL4030_USB=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 952430d9e2d9..855143fac6bd 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -156,6 +156,7 @@ CONFIG_LATENCYTOP=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_UART_8250=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig index 00515ef9782d..89631795a915 100644 --- a/arch/arm/configs/rpc_defconfig +++ b/arch/arm/configs/rpc_defconfig @@ -131,3 +131,4 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_UART_8250=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index afa24799477a..510c747c65b4 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -3,8 +3,6 @@ CONFIG_SYSVIPC=y CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y CONFIG_SLAB=y @@ -139,6 +137,12 @@ CONFIG_POWER_RESET=y CONFIG_SSB=m CONFIG_REGULATOR=y CONFIG_REGULATOR_ACT8865=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_SOC_CAMERA=y +CONFIG_SOC_CAMERA_OV2640=y +CONFIG_VIDEO_ATMEL_ISI=y CONFIG_FB=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set @@ -202,8 +206,6 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_SCHED_DEBUG is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_EARLY_PRINTK=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 3df6ca0c1d1f..b17036088726 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -17,9 +17,8 @@ CONFIG_ARCH_R8A7779=y CONFIG_ARCH_R8A7790=y CONFIG_ARCH_R8A7791=y CONFIG_ARCH_R8A7794=y -CONFIG_MACH_LAGER=y +CONFIG_ARCH_SH73A0=y CONFIG_MACH_MARZEN=y -# CONFIG_SWP_EMULATE is not set CONFIG_CPU_BPREDICT_DISABLE=y CONFIG_PL310_ERRATA_588369=y CONFIG_ARM_ERRATA_754322=y @@ -36,10 +35,16 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_KEXEC=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPUFREQ_DT=y CONFIG_VFP=y CONFIG_NEON=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -49,7 +54,9 @@ CONFIG_IP_PNP_DHCP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y +CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y CONFIG_MTD_SPI_NOR=y CONFIG_EEPROM_AT24=y @@ -73,11 +80,15 @@ CONFIG_SMSC911X=y # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set CONFIG_SMSC_PHY=y +CONFIG_MICREL_PHY=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ST1232=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_ADXL34X=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y @@ -86,6 +97,7 @@ CONFIG_SERIAL_8250_EM=y CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=20 CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y CONFIG_I2C_RIIC=y CONFIG_I2C_SH_MOBILE=y @@ -96,11 +108,18 @@ CONFIG_SPI_SH_MSIOF=y CONFIG_SPI_SH_HSPI=y CONFIG_GPIO_EM=y CONFIG_GPIO_RCAR=y +CONFIG_GPIO_PCF857X=y # CONFIG_HWMON is not set CONFIG_THERMAL=y +CONFIG_CPU_THERMAL=y CONFIG_RCAR_THERMAL=y +CONFIG_WATCHDOG=y +CONFIG_DA9063_WATCHDOG=y +CONFIG_MFD_AS3711=y +CONFIG_MFD_DA9063=y CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_AS3711=y +CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_GPIO=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y @@ -116,10 +135,12 @@ CONFIG_VIDEO_RENESAS_VSP1=y CONFIG_VIDEO_ADV7180=y CONFIG_DRM=y CONFIG_DRM_RCAR_DU=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_FB_SH_MOBILE_LCDC=y +CONFIG_FB_SH_MOBILE_MERAM=y # CONFIG_LCD_CLASS_DEVICE is not set # CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_PWM=y +CONFIG_BACKLIGHT_AS3711=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y @@ -130,6 +151,7 @@ CONFIG_SND_SOC_WM8978=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y +CONFIG_USB_R8A66597_HCD=y CONFIG_USB_RENESAS_USBHS=y CONFIG_USB_RCAR_PHY=y CONFIG_USB_RCAR_GEN2_PHY=y @@ -143,18 +165,20 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_RS5C372=y CONFIG_RTC_DRV_S35390A=y CONFIG_DMADEVICES=y CONFIG_SH_DMAE=y CONFIG_RCAR_DMAC=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_IIO=y +CONFIG_AK8975=y CONFIG_PWM=y CONFIG_PWM_RENESAS_TPU=y # CONFIG_DNOTIFY is not set CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y # CONFIG_MISC_FILESYSTEMS is not set CONFIG_NFS_FS=y CONFIG_NFS_V3_ACL=y @@ -166,16 +190,3 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set # CONFIG_ARM_UNWIND is not set -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_FREQ_STAT_DETAILS=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_CPU_THERMAL=y -CONFIG_CPUFREQ_DT=y -CONFIG_REGULATOR_DA9210=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 7a342d2780a8..8f6a5702b696 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -4,11 +4,14 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_PERF_EVENTS=y CONFIG_ARCH_SUNXI=y CONFIG_SMP=y +CONFIG_NR_CPUS=8 CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_HIGHPTE=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_CPU_FREQ=y +CONFIG_CPUFREQ_DT=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_PM=y @@ -54,6 +57,10 @@ CONFIG_STMMAC_ETH=y # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_AXP20X_PEK=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_SUN4I=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=8 @@ -71,12 +78,14 @@ CONFIG_GPIO_SYSFS=y CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_SUN6I=y -# CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_CPU_THERMAL=y CONFIG_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y CONFIG_MFD_AXP20X=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_GPIO=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 3ea9c3377ccb..d199eb249151 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -8,7 +8,6 @@ CONFIG_CGROUPS=y CONFIG_CGROUP_DEBUG=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_CPUACCT=y -CONFIG_RESOURCE_COUNTERS=y CONFIG_CGROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y CONFIG_BLK_DEV_INITRD=y @@ -46,7 +45,6 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y CONFIG_VFP=y CONFIG_NEON=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig index f489fdaa19b8..37fe607a4ede 100644 --- a/arch/arm/configs/vexpress_defconfig +++ b/arch/arm/configs/vexpress_defconfig @@ -118,8 +118,8 @@ CONFIG_HID_ZEROPLUS=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y -CONFIG_USB_ISP1760_HCD=y CONFIG_USB_STORAGE=y +CONFIG_USB_ISP1760=y CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y diff --git a/arch/arm/crypto/aesbs-core.S_shipped b/arch/arm/crypto/aesbs-core.S_shipped index 71e5fc7cfb18..1d1800f71c5b 100644 --- a/arch/arm/crypto/aesbs-core.S_shipped +++ b/arch/arm/crypto/aesbs-core.S_shipped @@ -58,14 +58,18 @@ # define VFP_ABI_FRAME 0 # define BSAES_ASM_EXTENDED_KEY # define XTS_CHAIN_TWEAK -# define __ARM_ARCH__ 7 +# define __ARM_ARCH__ __LINUX_ARM_ARCH__ +# define __ARM_MAX_ARCH__ 7 #endif #ifdef __thumb__ # define adrl adr #endif -#if __ARM_ARCH__>=7 +#if __ARM_MAX_ARCH__>=7 +.arch armv7-a +.fpu neon + .text .syntax unified @ ARMv7-capable assembler is expected to handle this #ifdef __thumb2__ @@ -74,8 +78,6 @@ .code 32 #endif -.fpu neon - .type _bsaes_decrypt8,%function .align 4 _bsaes_decrypt8: @@ -2095,9 +2097,11 @@ bsaes_xts_decrypt: vld1.8 {q8}, [r0] @ initial tweak adr r2, .Lxts_magic +#ifndef XTS_CHAIN_TWEAK tst r9, #0xf @ if not multiple of 16 it ne @ Thumb2 thing, sanity check in ARM subne r9, #0x10 @ subtract another 16 bytes +#endif subs r9, #0x80 blo .Lxts_dec_short diff --git a/arch/arm/crypto/bsaes-armv7.pl b/arch/arm/crypto/bsaes-armv7.pl index be068db960ee..a4d3856e7d24 100644 --- a/arch/arm/crypto/bsaes-armv7.pl +++ b/arch/arm/crypto/bsaes-armv7.pl @@ -701,14 +701,18 @@ $code.=<<___; # define VFP_ABI_FRAME 0 # define BSAES_ASM_EXTENDED_KEY # define XTS_CHAIN_TWEAK -# define __ARM_ARCH__ 7 +# define __ARM_ARCH__ __LINUX_ARM_ARCH__ +# define __ARM_MAX_ARCH__ 7 #endif #ifdef __thumb__ # define adrl adr #endif -#if __ARM_ARCH__>=7 +#if __ARM_MAX_ARCH__>=7 +.arch armv7-a +.fpu neon + .text .syntax unified @ ARMv7-capable assembler is expected to handle this #ifdef __thumb2__ @@ -717,8 +721,6 @@ $code.=<<___; .code 32 #endif -.fpu neon - .type _bsaes_decrypt8,%function .align 4 _bsaes_decrypt8: @@ -2076,9 +2078,11 @@ bsaes_xts_decrypt: vld1.8 {@XMM[8]}, [r0] @ initial tweak adr $magic, .Lxts_magic +#ifndef XTS_CHAIN_TWEAK tst $len, #0xf @ if not multiple of 16 it ne @ Thumb2 thing, sanity check in ARM subne $len, #0x10 @ subtract another 16 bytes +#endif subs $len, #0x80 blo .Lxts_dec_short diff --git a/arch/arm/include/asm/bitrev.h b/arch/arm/include/asm/bitrev.h new file mode 100644 index 000000000000..ec291c350ea3 --- /dev/null +++ b/arch/arm/include/asm/bitrev.h @@ -0,0 +1,20 @@ +#ifndef __ASM_BITREV_H +#define __ASM_BITREV_H + +static __always_inline __attribute_const__ u32 __arch_bitrev32(u32 x) +{ + __asm__ ("rbit %0, %1" : "=r" (x) : "r" (x)); + return x; +} + +static __always_inline __attribute_const__ u16 __arch_bitrev16(u16 x) +{ + return __arch_bitrev32((u32)x) >> 16; +} + +static __always_inline __attribute_const__ u8 __arch_bitrev8(u8 x) +{ + return __arch_bitrev32((u32)x) >> 24; +} + +#endif diff --git a/arch/arm/include/asm/compiler.h b/arch/arm/include/asm/compiler.h index 8155db2f7fa1..29fe85e59439 100644 --- a/arch/arm/include/asm/compiler.h +++ b/arch/arm/include/asm/compiler.h @@ -8,8 +8,21 @@ * This string is meant to be concatenated with the inline asm string and * will cause compilation to stop on mismatch. * (for details, see gcc PR 15089) + * For compatibility with clang, we have to specifically take the equivalence + * of 'r11' <-> 'fp' and 'r12' <-> 'ip' into account as well. */ -#define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t" +#define __asmeq(x, y) \ + ".ifnc " x "," y "; " \ + ".ifnc " x y ",fpr11; " \ + ".ifnc " x y ",r11fp; " \ + ".ifnc " x y ",ipr12; " \ + ".ifnc " x y ",r12ip; " \ + ".err; " \ + ".endif; " \ + ".endif; " \ + ".endif; " \ + ".endif; " \ + ".endif\n\t" #endif /* __ASM_ARM_COMPILER_H */ diff --git a/arch/arm/kernel/insn.h b/arch/arm/include/asm/insn.h index e96065da4dae..e96065da4dae 100644 --- a/arch/arm/kernel/insn.h +++ b/arch/arm/include/asm/insn.h diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h index 49fa0dfaad33..3ea9be559726 100644 --- a/arch/arm/include/asm/kprobes.h +++ b/arch/arm/include/asm/kprobes.h @@ -22,7 +22,6 @@ #define __ARCH_WANT_KPROBES_INSN_SLOT #define MAX_INSN_SIZE 2 -#define MAX_STACK_SIZE 64 /* 32 would probably be OK */ #define flush_insn_slot(p) do { } while (0) #define kretprobe_blacklist_size 0 @@ -51,5 +50,37 @@ int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr); int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data); +/* optinsn template addresses */ +extern __visible kprobe_opcode_t optprobe_template_entry; +extern __visible kprobe_opcode_t optprobe_template_val; +extern __visible kprobe_opcode_t optprobe_template_call; +extern __visible kprobe_opcode_t optprobe_template_end; +extern __visible kprobe_opcode_t optprobe_template_sub_sp; +extern __visible kprobe_opcode_t optprobe_template_add_sp; +extern __visible kprobe_opcode_t optprobe_template_restore_begin; +extern __visible kprobe_opcode_t optprobe_template_restore_orig_insn; +extern __visible kprobe_opcode_t optprobe_template_restore_end; + +#define MAX_OPTIMIZED_LENGTH 4 +#define MAX_OPTINSN_SIZE \ + ((unsigned long)&optprobe_template_end - \ + (unsigned long)&optprobe_template_entry) +#define RELATIVEJUMP_SIZE 4 + +struct arch_optimized_insn { + /* + * copy of the original instructions. + * Different from x86, ARM kprobe_opcode_t is u32. + */ +#define MAX_COPIED_INSN DIV_ROUND_UP(RELATIVEJUMP_SIZE, sizeof(kprobe_opcode_t)) + kprobe_opcode_t copied_insn[MAX_COPIED_INSN]; + /* detour code buffer */ + kprobe_opcode_t *insn; + /* + * We always copy one instruction on ARM, + * so size will always be 4, and unlike x86, there is no + * need for a size field. + */ +}; #endif /* _ARM_KPROBES_H */ diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index 3a67bec72d0c..25410b2d8bc1 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -96,6 +96,7 @@ extern char __kvm_hyp_code_end[]; extern void __kvm_flush_vm_context(void); extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); +extern void __kvm_tlb_flush_vmid(struct kvm *kvm); extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); #endif diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h index 7b0152321b20..a9c80a2ea1a7 100644 --- a/arch/arm/include/asm/kvm_emulate.h +++ b/arch/arm/include/asm/kvm_emulate.h @@ -23,6 +23,7 @@ #include <asm/kvm_asm.h> #include <asm/kvm_mmio.h> #include <asm/kvm_arm.h> +#include <asm/cputype.h> unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num); unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu); @@ -177,9 +178,9 @@ static inline u32 kvm_vcpu_hvc_get_imm(struct kvm_vcpu *vcpu) return kvm_vcpu_get_hsr(vcpu) & HSR_HVC_IMM_MASK; } -static inline unsigned long kvm_vcpu_get_mpidr(struct kvm_vcpu *vcpu) +static inline unsigned long kvm_vcpu_get_mpidr_aff(struct kvm_vcpu *vcpu) { - return vcpu->arch.cp15[c0_MPIDR]; + return vcpu->arch.cp15[c0_MPIDR] & MPIDR_HWID_BITMASK; } static inline void kvm_vcpu_set_be(struct kvm_vcpu *vcpu) diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 04b4ea0b550a..41008cd7c53f 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -68,6 +68,7 @@ struct kvm_arch { /* Interrupt controller */ struct vgic_dist vgic; + int max_vcpus; }; #define KVM_NR_MEM_OBJS 40 @@ -144,6 +145,7 @@ struct kvm_vm_stat { }; struct kvm_vcpu_stat { + u32 halt_successful_poll; u32 halt_wakeup; }; @@ -231,6 +233,10 @@ static inline void vgic_arch_setup(const struct vgic_params *vgic) int kvm_perf_init(void); int kvm_perf_teardown(void); +void kvm_mmu_wp_memory_region(struct kvm *kvm, int slot); + +struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr); + static inline void kvm_arch_hardware_disable(void) {} static inline void kvm_arch_hardware_unsetup(void) {} static inline void kvm_arch_sync_events(struct kvm *kvm) {} diff --git a/arch/arm/include/asm/kvm_mmio.h b/arch/arm/include/asm/kvm_mmio.h index adcc0d7d3175..3f83db2f6cf0 100644 --- a/arch/arm/include/asm/kvm_mmio.h +++ b/arch/arm/include/asm/kvm_mmio.h @@ -37,6 +37,7 @@ struct kvm_exit_mmio { u8 data[8]; u32 len; bool is_write; + void *private; }; static inline void kvm_prepare_mmio(struct kvm_run *run, diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index 1bca8f8af442..4cf48c3aca13 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -115,6 +115,27 @@ static inline void kvm_set_s2pmd_writable(pmd_t *pmd) pmd_val(*pmd) |= L_PMD_S2_RDWR; } +static inline void kvm_set_s2pte_readonly(pte_t *pte) +{ + pte_val(*pte) = (pte_val(*pte) & ~L_PTE_S2_RDWR) | L_PTE_S2_RDONLY; +} + +static inline bool kvm_s2pte_readonly(pte_t *pte) +{ + return (pte_val(*pte) & L_PTE_S2_RDWR) == L_PTE_S2_RDONLY; +} + +static inline void kvm_set_s2pmd_readonly(pmd_t *pmd) +{ + pmd_val(*pmd) = (pmd_val(*pmd) & ~L_PMD_S2_RDWR) | L_PMD_S2_RDONLY; +} + +static inline bool kvm_s2pmd_readonly(pmd_t *pmd) +{ + return (pmd_val(*pmd) & L_PMD_S2_RDWR) == L_PMD_S2_RDONLY; +} + + /* Open coded p*d_addr_end that can deal with 64bit addresses */ #define kvm_pgd_addr_end(addr, end) \ ({ u64 __boundary = ((addr) + PGDIR_SIZE) & PGDIR_MASK; \ @@ -128,29 +149,28 @@ static inline void kvm_set_s2pmd_writable(pmd_t *pmd) (__boundary - 1 < (end) - 1)? __boundary: (end); \ }) +#define kvm_pgd_index(addr) pgd_index(addr) + static inline bool kvm_page_empty(void *ptr) { struct page *ptr_page = virt_to_page(ptr); return page_count(ptr_page) == 1; } - #define kvm_pte_table_empty(kvm, ptep) kvm_page_empty(ptep) #define kvm_pmd_table_empty(kvm, pmdp) kvm_page_empty(pmdp) #define kvm_pud_table_empty(kvm, pudp) (0) #define KVM_PREALLOC_LEVEL 0 -static inline int kvm_prealloc_hwpgd(struct kvm *kvm, pgd_t *pgd) +static inline void *kvm_get_hwpgd(struct kvm *kvm) { - return 0; + return kvm->arch.pgd; } -static inline void kvm_free_hwpgd(struct kvm *kvm) { } - -static inline void *kvm_get_hwpgd(struct kvm *kvm) +static inline unsigned int kvm_get_hwpgd_size(void) { - return kvm->arch.pgd; + return PTRS_PER_S2_PGD * sizeof(pgd_t); } struct kvm; @@ -186,7 +206,7 @@ static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, pfn_t pfn, bool need_flush = !vcpu_has_cache_enabled(vcpu) || ipa_uncached; - VM_BUG_ON(size & PAGE_MASK); + VM_BUG_ON(size & ~PAGE_MASK); if (!need_flush && !icache_is_pipt()) goto vipt_cache; diff --git a/arch/arm/include/asm/mach/irda.h b/arch/arm/include/asm/mach/irda.h deleted file mode 100644 index 38f77b5e56cf..000000000000 --- a/arch/arm/include/asm/mach/irda.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/include/asm/mach/irda.h - * - * Copyright (C) 2004 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_MACH_IRDA_H -#define __ASM_ARM_MACH_IRDA_H - -struct irda_platform_data { - int (*startup)(struct device *); - void (*shutdown)(struct device *); - int (*set_power)(struct device *, unsigned int state); - void (*set_speed)(struct device *, unsigned int speed); -}; - -#endif diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index 8292b5f81e23..28b9bb35949e 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -19,9 +19,6 @@ struct pci_bus; struct device; struct hw_pci { -#ifdef CONFIG_PCI_DOMAINS - int domain; -#endif #ifdef CONFIG_PCI_MSI struct msi_controller *msi_ctrl; #endif @@ -45,9 +42,6 @@ struct hw_pci { * Per-controller structure */ struct pci_sys_data { -#ifdef CONFIG_PCI_DOMAINS - int domain; -#endif #ifdef CONFIG_PCI_MSI struct msi_controller *msi_ctrl; #endif diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h index 891a56b35bcf..563b92fc2f41 100644 --- a/arch/arm/include/asm/outercache.h +++ b/arch/arm/include/asm/outercache.h @@ -23,6 +23,8 @@ #include <linux/types.h> +struct l2x0_regs; + struct outer_cache_fns { void (*inv_range)(unsigned long, unsigned long); void (*clean_range)(unsigned long, unsigned long); @@ -36,6 +38,7 @@ struct outer_cache_fns { /* This is an ARM L2C thing */ void (*write_sec)(unsigned long, unsigned); + void (*configure)(const struct l2x0_regs *); }; extern struct outer_cache_fns outer_cache; diff --git a/arch/arm/kernel/patch.h b/arch/arm/include/asm/patch.h index 77e054c2f6cd..77e054c2f6cd 100644 --- a/arch/arm/kernel/patch.h +++ b/arch/arm/include/asm/patch.h diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 7e95d8535e24..585dc33a7a24 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -18,13 +18,6 @@ static inline int pcibios_assign_all_busses(void) } #ifdef CONFIG_PCI_DOMAINS -static inline int pci_domain_nr(struct pci_bus *bus) -{ - struct pci_sys_data *root = bus->sysdata; - - return root->domain; -} - static inline int pci_proc_domain(struct pci_bus *bus) { return pci_domain_nr(bus); diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h index f0279411847d..bfd662e49a25 100644 --- a/arch/arm/include/asm/pgtable-2level.h +++ b/arch/arm/include/asm/pgtable-2level.h @@ -10,6 +10,8 @@ #ifndef _ASM_PGTABLE_2LEVEL_H #define _ASM_PGTABLE_2LEVEL_H +#define __PAGETABLE_PMD_FOLDED + /* * Hardware-wise, we have a two level page table structure, where the first * level has 4096 entries, and the second level has 256 entries. Each entry @@ -118,7 +120,6 @@ #define L_PTE_VALID (_AT(pteval_t, 1) << 0) /* Valid */ #define L_PTE_PRESENT (_AT(pteval_t, 1) << 0) #define L_PTE_YOUNG (_AT(pteval_t, 1) << 1) -#define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */ #define L_PTE_DIRTY (_AT(pteval_t, 1) << 6) #define L_PTE_RDONLY (_AT(pteval_t, 1) << 7) #define L_PTE_USER (_AT(pteval_t, 1) << 8) diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index a31ecdad4b59..a745a2a53853 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -77,7 +77,6 @@ */ #define L_PTE_VALID (_AT(pteval_t, 1) << 0) /* Valid */ #define L_PTE_PRESENT (_AT(pteval_t, 3) << 0) /* Present */ -#define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */ #define L_PTE_USER (_AT(pteval_t, 1) << 6) /* AP[1] */ #define L_PTE_SHARED (_AT(pteval_t, 3) << 8) /* SH[1:0], inner shareable */ #define L_PTE_YOUNG (_AT(pteval_t, 1) << 10) /* AF */ @@ -130,6 +129,7 @@ #define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */ #define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */ +#define L_PMD_S2_RDONLY (_AT(pmdval_t, 1) << 6) /* HAP[1] */ #define L_PMD_S2_RDWR (_AT(pmdval_t, 3) << 6) /* HAP[2:1] */ /* @@ -258,7 +258,10 @@ PMD_BIT_FUNC(mkyoung, |= PMD_SECT_AF); #define mk_pmd(page,prot) pfn_pmd(page_to_pfn(page),prot) /* represent a notpresent pmd by zero, this is used by pmdp_invalidate */ -#define pmd_mknotpresent(pmd) (__pmd(0)) +static inline pmd_t pmd_mknotpresent(pmd_t pmd) +{ + return __pmd(0); +} static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot) { diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h index 0642228ff785..add094d09e3e 100644 --- a/arch/arm/include/asm/pgtable-nommu.h +++ b/arch/arm/include/asm/pgtable-nommu.h @@ -54,8 +54,6 @@ typedef pte_t *pte_addr_t; -static inline int pte_file(pte_t pte) { return 0; } - /* * ZERO_PAGE is a global shared page that is always zero: used * for zero-mapped memory areas etc.. @@ -87,7 +85,7 @@ extern unsigned int kobjsize(const void *objp); #define VMALLOC_START 0UL #define VMALLOC_END 0xffffffffUL -#define FIRST_USER_ADDRESS (0) +#define FIRST_USER_ADDRESS 0UL #include <asm-generic/pgtable.h> diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index d5cac545ba33..f40354198bad 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -318,12 +318,12 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) * * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * <--------------- offset ----------------------> < type -> 0 0 0 + * <--------------- offset ------------------------> < type -> 0 0 * - * This gives us up to 31 swap files and 64GB per swap file. Note that + * This gives us up to 31 swap files and 128GB per swap file. Note that * the offset field is always non-zero. */ -#define __SWP_TYPE_SHIFT 3 +#define __SWP_TYPE_SHIFT 2 #define __SWP_TYPE_BITS 5 #define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) #define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) @@ -342,20 +342,6 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) */ #define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS) -/* - * Encode and decode a file entry. File entries are stored in the Linux - * page tables as follows: - * - * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 - * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * <----------------------- offset ------------------------> 1 0 0 - */ -#define pte_file(pte) (pte_val(pte) & L_PTE_FILE) -#define pte_to_pgoff(x) (pte_val(x) >> 3) -#define pgoff_to_pte(x) __pte(((x) << 3) | L_PTE_FILE) - -#define PTE_FILE_MAX_BITS 29 - /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ /* FIXME: this is not correct */ #define kern_addr_valid(addr) (1) diff --git a/arch/arm/include/asm/probes.h b/arch/arm/include/asm/probes.h index 806cfe622a9e..1e5b9bb92270 100644 --- a/arch/arm/include/asm/probes.h +++ b/arch/arm/include/asm/probes.h @@ -19,6 +19,8 @@ #ifndef _ASM_PROBES_H #define _ASM_PROBES_H +#ifndef __ASSEMBLY__ + typedef u32 probes_opcode_t; struct arch_probes_insn; @@ -38,6 +40,19 @@ struct arch_probes_insn { probes_check_cc *insn_check_cc; probes_insn_singlestep_t *insn_singlestep; probes_insn_fn_t *insn_fn; + int stack_space; + unsigned long register_usage_flags; + bool kprobe_direct_exec; }; +#endif /* __ASSEMBLY__ */ + +/* + * We assume one instruction can consume at most 64 bytes stack, which is + * 'push {r0-r15}'. Instructions consume more or unknown stack space like + * 'str r0, [sp, #-80]' and 'str r0, [sp, r1]' should be prohibit to probe. + * Both kprobe and jprobe use this macro. + */ +#define MAX_STACK_SIZE 64 + #endif diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index d890e41f5520..72812a1f3d1c 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -68,7 +68,6 @@ struct thread_info { #ifdef CONFIG_ARM_THUMBEE unsigned long thumbee_state; /* ThumbEE Handler Base register */ #endif - struct restart_block restart_block; }; #define INIT_THREAD_INFO(tsk) \ @@ -81,9 +80,6 @@ struct thread_info { .cpu_domain = domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ domain_val(DOMAIN_IO, DOMAIN_CLIENT), \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ } #define init_thread_info (init_thread_union.thread_info) diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 4767eb9caa78..ce0786efd26c 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -73,7 +73,7 @@ static inline void set_fs(mm_segment_t fs) modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER); } -#define segment_eq(a,b) ((a) == (b)) +#define segment_eq(a, b) ((a) == (b)) #define __addr_ok(addr) ({ \ unsigned long flag; \ @@ -84,7 +84,7 @@ static inline void set_fs(mm_segment_t fs) (flag == 0); }) /* We use 33-bit arithmetic here... */ -#define __range_ok(addr,size) ({ \ +#define __range_ok(addr, size) ({ \ unsigned long flag, roksum; \ __chk_user_ptr(addr); \ __asm__("adds %1, %2, %3; sbcccs %1, %1, %0; movcc %0, #0" \ @@ -123,7 +123,7 @@ extern int __get_user_64t_4(void *); #define __GUP_CLOBBER_32t_8 "lr", "cc" #define __GUP_CLOBBER_8 "lr", "cc" -#define __get_user_x(__r2,__p,__e,__l,__s) \ +#define __get_user_x(__r2, __p, __e, __l, __s) \ __asm__ __volatile__ ( \ __asmeq("%0", "r0") __asmeq("%1", "r2") \ __asmeq("%3", "r1") \ @@ -134,7 +134,7 @@ extern int __get_user_64t_4(void *); /* narrowing a double-word get into a single 32bit word register: */ #ifdef __ARMEB__ -#define __get_user_x_32t(__r2, __p, __e, __l, __s) \ +#define __get_user_x_32t(__r2, __p, __e, __l, __s) \ __get_user_x(__r2, __p, __e, __l, 32t_8) #else #define __get_user_x_32t __get_user_x @@ -158,7 +158,7 @@ extern int __get_user_64t_4(void *); #endif -#define __get_user_check(x,p) \ +#define __get_user_check(x, p) \ ({ \ unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ @@ -196,10 +196,10 @@ extern int __get_user_64t_4(void *); __e; \ }) -#define get_user(x,p) \ +#define get_user(x, p) \ ({ \ might_fault(); \ - __get_user_check(x,p); \ + __get_user_check(x, p); \ }) extern int __put_user_1(void *, unsigned int); @@ -207,7 +207,7 @@ extern int __put_user_2(void *, unsigned int); extern int __put_user_4(void *, unsigned int); extern int __put_user_8(void *, unsigned long long); -#define __put_user_x(__r2,__p,__e,__l,__s) \ +#define __put_user_x(__r2, __p, __e, __l, __s) \ __asm__ __volatile__ ( \ __asmeq("%0", "r0") __asmeq("%2", "r2") \ __asmeq("%3", "r1") \ @@ -216,7 +216,7 @@ extern int __put_user_8(void *, unsigned long long); : "0" (__p), "r" (__r2), "r" (__l) \ : "ip", "lr", "cc") -#define __put_user_check(x,p) \ +#define __put_user_check(x, p) \ ({ \ unsigned long __limit = current_thread_info()->addr_limit - 1; \ const typeof(*(p)) __user *__tmp_p = (p); \ @@ -242,10 +242,10 @@ extern int __put_user_8(void *, unsigned long long); __e; \ }) -#define put_user(x,p) \ +#define put_user(x, p) \ ({ \ might_fault(); \ - __put_user_check(x,p); \ + __put_user_check(x, p); \ }) #else /* CONFIG_MMU */ @@ -255,21 +255,21 @@ extern int __put_user_8(void *, unsigned long long); */ #define USER_DS KERNEL_DS -#define segment_eq(a,b) (1) -#define __addr_ok(addr) ((void)(addr),1) -#define __range_ok(addr,size) ((void)(addr),0) +#define segment_eq(a, b) (1) +#define __addr_ok(addr) ((void)(addr), 1) +#define __range_ok(addr, size) ((void)(addr), 0) #define get_fs() (KERNEL_DS) static inline void set_fs(mm_segment_t fs) { } -#define get_user(x,p) __get_user(x,p) -#define put_user(x,p) __put_user(x,p) +#define get_user(x, p) __get_user(x, p) +#define put_user(x, p) __put_user(x, p) #endif /* CONFIG_MMU */ -#define access_ok(type,addr,size) (__range_ok(addr,size) == 0) +#define access_ok(type, addr, size) (__range_ok(addr, size) == 0) #define user_addr_max() \ (segment_eq(get_fs(), KERNEL_DS) ? ~0UL : get_fs()) @@ -283,35 +283,35 @@ static inline void set_fs(mm_segment_t fs) * error occurs, and leave it unchanged on success. Note that these * versions are void (ie, don't return a value as such). */ -#define __get_user(x,ptr) \ +#define __get_user(x, ptr) \ ({ \ long __gu_err = 0; \ - __get_user_err((x),(ptr),__gu_err); \ + __get_user_err((x), (ptr), __gu_err); \ __gu_err; \ }) -#define __get_user_error(x,ptr,err) \ +#define __get_user_error(x, ptr, err) \ ({ \ - __get_user_err((x),(ptr),err); \ + __get_user_err((x), (ptr), err); \ (void) 0; \ }) -#define __get_user_err(x,ptr,err) \ +#define __get_user_err(x, ptr, err) \ do { \ unsigned long __gu_addr = (unsigned long)(ptr); \ unsigned long __gu_val; \ __chk_user_ptr(ptr); \ might_fault(); \ switch (sizeof(*(ptr))) { \ - case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \ - case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \ - case 4: __get_user_asm_word(__gu_val,__gu_addr,err); break; \ + case 1: __get_user_asm_byte(__gu_val, __gu_addr, err); break; \ + case 2: __get_user_asm_half(__gu_val, __gu_addr, err); break; \ + case 4: __get_user_asm_word(__gu_val, __gu_addr, err); break; \ default: (__gu_val) = __get_user_bad(); \ } \ (x) = (__typeof__(*(ptr)))__gu_val; \ } while (0) -#define __get_user_asm_byte(x,addr,err) \ +#define __get_user_asm_byte(x, addr, err) \ __asm__ __volatile__( \ "1: " TUSER(ldrb) " %1,[%2],#0\n" \ "2:\n" \ @@ -330,7 +330,7 @@ do { \ : "cc") #ifndef __ARMEB__ -#define __get_user_asm_half(x,__gu_addr,err) \ +#define __get_user_asm_half(x, __gu_addr, err) \ ({ \ unsigned long __b1, __b2; \ __get_user_asm_byte(__b1, __gu_addr, err); \ @@ -338,7 +338,7 @@ do { \ (x) = __b1 | (__b2 << 8); \ }) #else -#define __get_user_asm_half(x,__gu_addr,err) \ +#define __get_user_asm_half(x, __gu_addr, err) \ ({ \ unsigned long __b1, __b2; \ __get_user_asm_byte(__b1, __gu_addr, err); \ @@ -347,7 +347,7 @@ do { \ }) #endif -#define __get_user_asm_word(x,addr,err) \ +#define __get_user_asm_word(x, addr, err) \ __asm__ __volatile__( \ "1: " TUSER(ldr) " %1,[%2],#0\n" \ "2:\n" \ @@ -365,35 +365,35 @@ do { \ : "r" (addr), "i" (-EFAULT) \ : "cc") -#define __put_user(x,ptr) \ +#define __put_user(x, ptr) \ ({ \ long __pu_err = 0; \ - __put_user_err((x),(ptr),__pu_err); \ + __put_user_err((x), (ptr), __pu_err); \ __pu_err; \ }) -#define __put_user_error(x,ptr,err) \ +#define __put_user_error(x, ptr, err) \ ({ \ - __put_user_err((x),(ptr),err); \ + __put_user_err((x), (ptr), err); \ (void) 0; \ }) -#define __put_user_err(x,ptr,err) \ +#define __put_user_err(x, ptr, err) \ do { \ unsigned long __pu_addr = (unsigned long)(ptr); \ __typeof__(*(ptr)) __pu_val = (x); \ __chk_user_ptr(ptr); \ might_fault(); \ switch (sizeof(*(ptr))) { \ - case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \ - case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \ - case 4: __put_user_asm_word(__pu_val,__pu_addr,err); break; \ - case 8: __put_user_asm_dword(__pu_val,__pu_addr,err); break; \ + case 1: __put_user_asm_byte(__pu_val, __pu_addr, err); break; \ + case 2: __put_user_asm_half(__pu_val, __pu_addr, err); break; \ + case 4: __put_user_asm_word(__pu_val, __pu_addr, err); break; \ + case 8: __put_user_asm_dword(__pu_val, __pu_addr, err); break; \ default: __put_user_bad(); \ } \ } while (0) -#define __put_user_asm_byte(x,__pu_addr,err) \ +#define __put_user_asm_byte(x, __pu_addr, err) \ __asm__ __volatile__( \ "1: " TUSER(strb) " %1,[%2],#0\n" \ "2:\n" \ @@ -411,22 +411,22 @@ do { \ : "cc") #ifndef __ARMEB__ -#define __put_user_asm_half(x,__pu_addr,err) \ +#define __put_user_asm_half(x, __pu_addr, err) \ ({ \ - unsigned long __temp = (unsigned long)(x); \ + unsigned long __temp = (__force unsigned long)(x); \ __put_user_asm_byte(__temp, __pu_addr, err); \ __put_user_asm_byte(__temp >> 8, __pu_addr + 1, err); \ }) #else -#define __put_user_asm_half(x,__pu_addr,err) \ +#define __put_user_asm_half(x, __pu_addr, err) \ ({ \ - unsigned long __temp = (unsigned long)(x); \ + unsigned long __temp = (__force unsigned long)(x); \ __put_user_asm_byte(__temp >> 8, __pu_addr, err); \ __put_user_asm_byte(__temp, __pu_addr + 1, err); \ }) #endif -#define __put_user_asm_word(x,__pu_addr,err) \ +#define __put_user_asm_word(x, __pu_addr, err) \ __asm__ __volatile__( \ "1: " TUSER(str) " %1,[%2],#0\n" \ "2:\n" \ @@ -451,7 +451,7 @@ do { \ #define __reg_oper1 "%R2" #endif -#define __put_user_asm_dword(x,__pu_addr,err) \ +#define __put_user_asm_dword(x, __pu_addr, err) \ __asm__ __volatile__( \ ARM( "1: " TUSER(str) " " __reg_oper1 ", [%1], #4\n" ) \ ARM( "2: " TUSER(str) " " __reg_oper0 ", [%1]\n" ) \ @@ -480,9 +480,9 @@ extern unsigned long __must_check __copy_to_user_std(void __user *to, const void extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n); extern unsigned long __must_check __clear_user_std(void __user *addr, unsigned long n); #else -#define __copy_from_user(to,from,n) (memcpy(to, (void __force *)from, n), 0) -#define __copy_to_user(to,from,n) (memcpy((void __force *)to, from, n), 0) -#define __clear_user(addr,n) (memset((void __force *)addr, 0, n), 0) +#define __copy_from_user(to, from, n) (memcpy(to, (void __force *)from, n), 0) +#define __copy_to_user(to, from, n) (memcpy((void __force *)to, from, n), 0) +#define __clear_user(addr, n) (memset((void __force *)addr, 0, n), 0) #endif static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n) diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h index 68c739b3fdf4..2f7e6ff67d51 100644 --- a/arch/arm/include/asm/xen/page.h +++ b/arch/arm/include/asm/xen/page.h @@ -92,7 +92,7 @@ extern int set_foreign_p2m_mapping(struct gnttab_map_grant_ref *map_ops, struct page **pages, unsigned int count); extern int clear_foreign_p2m_mapping(struct gnttab_unmap_grant_ref *unmap_ops, - struct gnttab_map_grant_ref *kmap_ops, + struct gnttab_unmap_grant_ref *kunmap_ops, struct page **pages, unsigned int count); bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn); diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/include/debug/at91.S index 2103a90f2261..c3c45e628e33 100644 --- a/arch/arm/mach-at91/include/mach/debug-macro.S +++ b/arch/arm/include/debug/at91.S @@ -1,6 +1,4 @@ /* - * arch/arm/mach-at91/include/mach/debug-macro.S - * * Copyright (C) 2003-2005 SAN People * * Debugging macro include header @@ -11,18 +9,26 @@ * */ -#include <mach/hardware.h> -#include <mach/at91_dbgu.h> - #if defined(CONFIG_AT91_DEBUG_LL_DBGU0) -#define AT91_DBGU AT91_BASE_DBGU0 +#define AT91_DBGU 0xfffff200 /* AT91_BASE_DBGU0 */ #elif defined(CONFIG_AT91_DEBUG_LL_DBGU1) -#define AT91_DBGU AT91_BASE_DBGU1 +#define AT91_DBGU 0xffffee00 /* AT91_BASE_DBGU1 */ #else /* On sama5d4, use USART3 as low level serial console */ -#define AT91_DBGU SAMA5D4_BASE_USART3 +#define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */ +#endif + +#ifdef CONFIG_MMU +#define AT91_IO_P2V(x) ((x) - 0x01000000) +#else +#define AT91_IO_P2V(x) (x) #endif +#define AT91_DBGU_SR (0x14) /* Status Register */ +#define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */ +#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */ +#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */ + .macro addruart, rp, rv, tmp ldr \rp, =AT91_DBGU @ System peripherals (phys address) ldr \rv, =AT91_IO_P2V(AT91_DBGU) @ System peripherals (virt address) diff --git a/arch/arm/include/debug/digicolor.S b/arch/arm/include/debug/digicolor.S new file mode 100644 index 000000000000..c9517150766a --- /dev/null +++ b/arch/arm/include/debug/digicolor.S @@ -0,0 +1,35 @@ +/* + * Debugging macro include header for Conexant Digicolor USART + * + * Copyright (C) 2014 Paradox Innovation Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#define UA0_STATUS 0x0742 +#define UA0_EMI_REC 0x0744 + +#define UA0_STATUS_TX_READY 0x40 + +#ifdef CONFIG_DEBUG_UART_PHYS + .macro addruart, rp, rv, tmp + ldr \rp, =CONFIG_DEBUG_UART_PHYS + ldr \rv, =CONFIG_DEBUG_UART_VIRT + .endm +#endif + + .macro senduart,rd,rx + strb \rd, [\rx, #UA0_EMI_REC] + .endm + + .macro waituart,rd,rx + .endm + + .macro busyuart,rd,rx +1001: ldrb \rd, [\rx, #UA0_STATUS] + tst \rd, #UA0_STATUS_TX_READY + beq 1001b + .endm diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/include/debug/ks8695.S index a79e48981202..961da1f32ab3 100644 --- a/arch/arm/mach-ks8695/include/mach/debug-macro.S +++ b/arch/arm/include/debug/ks8695.S @@ -1,5 +1,5 @@ /* - * arch/arm/mach-ks8695/include/mach/debug-macro.S + * arch/arm/include/debug/ks8695.S * * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> * Copyright (C) 2006 Simtec Electronics @@ -11,8 +11,12 @@ * published by the Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/regs-uart.h> +#define KS8695_UART_PA 0x03ffe000 +#define KS8695_UART_VA 0xf00fe000 +#define KS8695_URTH (0x04) +#define KS8695_URLS (0x14) +#define URLS_URTE (1 << 6) +#define URLS_URTHRE (1 << 5) .macro addruart, rp, rv, tmp ldr \rp, =KS8695_UART_PA @ physical base address diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S index 9ef57612811d..e55a9426b496 100644 --- a/arch/arm/include/debug/msm.S +++ b/arch/arm/include/debug/msm.S @@ -23,6 +23,7 @@ .endm .macro senduart, rd, rx +ARM_BE8(rev \rd, \rd ) #ifdef CONFIG_DEBUG_QCOM_UARTDM @ Write the 1 character to UARTDM_TF str \rd, [\rx, #0x70] @@ -35,24 +36,29 @@ #ifdef CONFIG_DEBUG_QCOM_UARTDM @ check for TX_EMT in UARTDM_SR ldr \rd, [\rx, #0x08] +ARM_BE8(rev \rd, \rd ) tst \rd, #0x08 bne 1002f @ wait for TXREADY in UARTDM_ISR 1001: ldr \rd, [\rx, #0x14] +ARM_BE8(rev \rd, \rd ) tst \rd, #0x80 beq 1001b 1002: @ Clear TX_READY by writing to the UARTDM_CR register mov \rd, #0x300 +ARM_BE8(rev \rd, \rd ) str \rd, [\rx, #0x10] @ Write 0x1 to NCF register mov \rd, #0x1 +ARM_BE8(rev \rd, \rd ) str \rd, [\rx, #0x40] @ UARTDM reg. Read to induce delay ldr \rd, [\rx, #0x08] #else @ wait for TX_READY 1001: ldr \rd, [\rx, #0x08] +ARM_BE8(rev \rd, \rd ) tst \rd, #0x04 beq 1001b #endif diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/include/debug/netx.S index 247781e096e2..81e1b2af70f7 100644 --- a/arch/arm/mach-netx/include/mach/debug-macro.S +++ b/arch/arm/include/debug/netx.S @@ -1,5 +1,4 @@ -/* arch/arm/mach-netx/include/mach/debug-macro.S - * +/* * Debugging macro include header * * Copyright (C) 1994-1999 Russell King @@ -11,26 +10,27 @@ * */ -#include "hardware.h" +#define UART_DATA 0 +#define UART_FLAG 0x18 +#define UART_FLAG_BUSY (1 << 3) .macro addruart, rp, rv, tmp - mov \rp, #0x00000a00 - orr \rv, \rp, #io_p2v(0x00100000) @ virtual - orr \rp, \rp, #0x00100000 @ physical + ldr \rp, =CONFIG_DEBUG_UART_PHYS + ldr \rv, =CONFIG_DEBUG_UART_VIRT .endm .macro senduart,rd,rx - str \rd, [\rx, #0] + str \rd, [\rx, #UART_DATA] .endm .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #0x18] - tst \rd, #(1 << 3) +1002: ldr \rd, [\rx, #UART_FLAG] + tst \rd, #UART_FLAG_BUSY bne 1002b .endm .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x18] - tst \rd, #(1 << 3) +1001: ldr \rd, [\rx, #UART_FLAG] + tst \rd, #UART_FLAG_BUSY bne 1001b .endm diff --git a/arch/arm/include/debug/sirf.S b/arch/arm/include/debug/sirf.S index dbf250cf18e6..630f231f2f37 100644 --- a/arch/arm/include/debug/sirf.S +++ b/arch/arm/include/debug/sirf.S @@ -6,37 +6,33 @@ * Licensed under GPLv2 or later. */ -#if defined(CONFIG_DEBUG_SIRFPRIMA2_UART1) -#define SIRFSOC_UART1_PA_BASE 0xb0060000 -#elif defined(CONFIG_DEBUG_SIRFMARCO_UART1) -#define SIRFSOC_UART1_PA_BASE 0xcc060000 -#else -#define SIRFSOC_UART1_PA_BASE 0 -#endif +#define SIRF_LLUART_TXFIFO_STATUS 0x0114 +#define SIRF_LLUART_TXFIFO_DATA 0x0118 -#define SIRFSOC_UART1_VA_BASE 0xFEC60000 +#define SIRF_LLUART_TXFIFO_FULL (1 << 5) -#define SIRFSOC_UART_TXFIFO_STATUS 0x0114 -#define SIRFSOC_UART_TXFIFO_DATA 0x0118 +#ifdef CONFIG_DEBUG_SIRFATLAS7_UART0 +#define SIRF_LLUART_TXFIFO_EMPTY (1 << 8) +#else +#define SIRF_LLUART_TXFIFO_EMPTY (1 << 6) +#endif -#define SIRFSOC_UART1_TXFIFO_FULL (1 << 5) -#define SIRFSOC_UART1_TXFIFO_EMPTY (1 << 6) .macro addruart, rp, rv, tmp - ldr \rp, =SIRFSOC_UART1_PA_BASE @ physical - ldr \rv, =SIRFSOC_UART1_VA_BASE @ virtual + ldr \rp, =CONFIG_DEBUG_UART_PHYS @ physical + ldr \rv, =CONFIG_DEBUG_UART_VIRT @ virtual .endm .macro senduart,rd,rx - str \rd, [\rx, #SIRFSOC_UART_TXFIFO_DATA] + str \rd, [\rx, #SIRF_LLUART_TXFIFO_DATA] .endm .macro busyuart,rd,rx .endm .macro waituart,rd,rx -1001: ldr \rd, [\rx, #SIRFSOC_UART_TXFIFO_STATUS] - tst \rd, #SIRFSOC_UART1_TXFIFO_EMPTY +1001: ldr \rd, [\rx, #SIRF_LLUART_TXFIFO_STATUS] + tst \rd, #SIRF_LLUART_TXFIFO_EMPTY beq 1001b .endm diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h index 09ee408c1a67..0db25bc32864 100644 --- a/arch/arm/include/uapi/asm/kvm.h +++ b/arch/arm/include/uapi/asm/kvm.h @@ -175,6 +175,8 @@ struct kvm_arch_memory_slot { #define KVM_DEV_ARM_VGIC_OFFSET_SHIFT 0 #define KVM_DEV_ARM_VGIC_OFFSET_MASK (0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT) #define KVM_DEV_ARM_VGIC_GRP_NR_IRQS 3 +#define KVM_DEV_ARM_VGIC_GRP_CTRL 4 +#define KVM_DEV_ARM_VGIC_CTRL_INIT 0 /* KVM_IRQ_LINE irq field index values */ #define KVM_ARM_IRQ_TYPE_SHIFT 24 diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index fb2b71ebe3f2..902397dd1000 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -51,20 +51,8 @@ obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o insn.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o insn.o obj-$(CONFIG_JUMP_LABEL) += jump_label.o insn.o patch.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o -obj-$(CONFIG_UPROBES) += probes.o probes-arm.o uprobes.o uprobes-arm.o -obj-$(CONFIG_KPROBES) += probes.o kprobes.o kprobes-common.o patch.o -ifdef CONFIG_THUMB2_KERNEL -obj-$(CONFIG_KPROBES) += kprobes-thumb.o probes-thumb.o -else -obj-$(CONFIG_KPROBES) += kprobes-arm.o probes-arm.o -endif -obj-$(CONFIG_ARM_KPROBES_TEST) += test-kprobes.o -test-kprobes-objs := kprobes-test.o -ifdef CONFIG_THUMB2_KERNEL -test-kprobes-objs += kprobes-test-thumb.o -else -test-kprobes-objs += kprobes-test-arm.o -endif +# Main staffs in KPROBES are in arch/arm/probes/ . +obj-$(CONFIG_KPROBES) += patch.o insn.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o obj-$(CONFIG_ARM_THUMBEE) += thumbee.o obj-$(CONFIG_KGDB) += kgdb.o patch.o diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index a4effd6d8f2f..ab19b7c03423 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -422,17 +422,16 @@ static int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) static int pcibios_init_resources(int busnr, struct pci_sys_data *sys) { int ret; - struct pci_host_bridge_window *window; + struct resource_entry *window; if (list_empty(&sys->resources)) { pci_add_resource_offset(&sys->resources, &iomem_resource, sys->mem_offset); } - list_for_each_entry(window, &sys->resources, list) { + resource_list_for_each_entry(window, &sys->resources) if (resource_type(window->res) == IORESOURCE_IO) return 0; - } sys->io_res.start = (busnr * SZ_64K) ? : pcibios_min_io; sys->io_res.end = (busnr + 1) * SZ_64K - 1; @@ -463,9 +462,6 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw, if (!sys) panic("PCI: unable to allocate sys data!"); -#ifdef CONFIG_PCI_DOMAINS - sys->domain = hw->domain; -#endif #ifdef CONFIG_PCI_MSI sys->msi_ctrl = hw->msi_ctrl; #endif diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 2f5555d307b3..672b21942fff 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -31,6 +31,7 @@ #include "entry-header.S" #include <asm/entry-macro-multi.S> +#include <asm/probes.h> /* * Interrupt handling. @@ -249,7 +250,7 @@ __und_svc: @ If a kprobe is about to simulate a "stmdb sp..." instruction, @ it obviously needs free stack space which then will belong to @ the saved context. - svc_entry 64 + svc_entry MAX_STACK_SIZE #else svc_entry #endif diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index b8c75e45a950..709ee1d6d4df 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -20,8 +20,7 @@ #include <asm/cacheflush.h> #include <asm/opcodes.h> #include <asm/ftrace.h> - -#include "insn.h" +#include <asm/insn.h> #ifdef CONFIG_THUMB2_KERNEL #define NOP 0xf85deb04 /* pop.w {lr} */ diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 664eee8c4a26..01963273c07a 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -346,6 +346,12 @@ __turn_mmu_on_loc: #if defined(CONFIG_SMP) .text +ENTRY(secondary_startup_arm) + .arm + THUMB( adr r9, BSYM(1f) ) @ Kernel is entered in ARM. + THUMB( bx r9 ) @ If this is a Thumb-2 kernel, + THUMB( .thumb ) @ switch to Thumb now. + THUMB(1: ) ENTRY(secondary_startup) /* * Common entry point for secondary CPUs. @@ -385,6 +391,7 @@ ENTRY(secondary_startup) THUMB( add r12, r10, #PROCINFO_INITFUNC ) THUMB( ret r12 ) ENDPROC(secondary_startup) +ENDPROC(secondary_startup_arm) /* * r6 = &secondary_data @@ -586,7 +593,7 @@ __fixup_pv_table: add r5, r5, r3 @ adjust table end address add r6, r6, r3 @ adjust __pv_phys_pfn_offset address add r7, r7, r3 @ adjust __pv_offset address - mov r0, r8, lsr #12 @ convert to PFN + mov r0, r8, lsr #PAGE_SHIFT @ convert to PFN str r0, [r6] @ save computed PHYS_OFFSET to __pv_phys_pfn_offset strcc ip, [r7, #HIGH_OFFSET] @ save to __pv_offset high bits mov r6, r3, lsr #24 @ constant for add/sub instructions diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index ad857bada96c..350f188c92d2 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -109,7 +109,8 @@ void __init init_IRQ(void) if (IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_CACHE_L2X0) && (machine_desc->l2c_aux_mask || machine_desc->l2c_aux_val)) { - outer_cache.write_sec = machine_desc->l2c_write_sec; + if (!outer_cache.write_sec) + outer_cache.write_sec = machine_desc->l2c_write_sec; ret = l2x0_of_init(machine_desc->l2c_aux_val, machine_desc->l2c_aux_mask); if (ret) diff --git a/arch/arm/kernel/jump_label.c b/arch/arm/kernel/jump_label.c index afeeb9ea6f43..e39cbf488cfe 100644 --- a/arch/arm/kernel/jump_label.c +++ b/arch/arm/kernel/jump_label.c @@ -1,8 +1,7 @@ #include <linux/kernel.h> #include <linux/jump_label.h> - -#include "insn.h" -#include "patch.h" +#include <asm/patch.h> +#include <asm/insn.h> #ifdef HAVE_JUMP_LABEL diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c index 07db2f8a1b45..a6ad93c9bce3 100644 --- a/arch/arm/kernel/kgdb.c +++ b/arch/arm/kernel/kgdb.c @@ -14,10 +14,9 @@ #include <linux/kgdb.h> #include <linux/uaccess.h> +#include <asm/patch.h> #include <asm/traps.h> -#include "patch.h" - struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = { { "r0", 4, offsetof(struct pt_regs, ARM_r0)}, diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index bea7db9e5b80..2e11961f65ae 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -41,7 +41,7 @@ void *module_alloc(unsigned long size) { return __vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END, - GFP_KERNEL, PAGE_KERNEL_EXEC, NUMA_NO_NODE, + GFP_KERNEL, PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE, __builtin_return_address(0)); } #endif diff --git a/arch/arm/kernel/patch.c b/arch/arm/kernel/patch.c index 5038960e3c55..69bda1a5707e 100644 --- a/arch/arm/kernel/patch.c +++ b/arch/arm/kernel/patch.c @@ -8,8 +8,7 @@ #include <asm/fixmap.h> #include <asm/smp_plat.h> #include <asm/opcodes.h> - -#include "patch.h" +#include <asm/patch.h> struct patch { void *addr; diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index dd9acc95ebc0..61b53c46edfa 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -231,7 +231,7 @@ static void cpu_pmu_destroy(struct arm_pmu *cpu_pmu) /* * PMU platform driver and devicetree bindings. */ -static struct of_device_id cpu_pmu_of_device_ids[] = { +static const struct of_device_id cpu_pmu_of_device_ids[] = { {.compatible = "arm,cortex-a17-pmu", .data = armv7_a17_pmu_init}, {.compatible = "arm,cortex-a15-pmu", .data = armv7_a15_pmu_init}, {.compatible = "arm,cortex-a12-pmu", .data = armv7_a12_pmu_init}, diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index e55408e96559..1d60bebea4b8 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -246,12 +246,9 @@ static int __get_cpu_architecture(void) if (cpu_arch) cpu_arch += CPU_ARCH_ARMv3; } else if ((read_cpuid_id() & 0x000f0000) == 0x000f0000) { - unsigned int mmfr0; - /* Revised CPUID format. Read the Memory Model Feature * Register 0 and check for VMSAv7 or PMSAv7 */ - asm("mrc p15, 0, %0, c0, c1, 4" - : "=r" (mmfr0)); + unsigned int mmfr0 = read_cpuid_ext(CPUID_EXT_MMFR0); if ((mmfr0 & 0x0000000f) >= 0x00000003 || (mmfr0 & 0x000000f0) >= 0x00000030) cpu_arch = CPU_ARCH_ARMv7; diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 8aa6f1b87c9e..023ac905e4c3 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -191,7 +191,7 @@ asmlinkage int sys_sigreturn(struct pt_regs *regs) struct sigframe __user *frame; /* Always make any pending restarted system calls return -EINTR */ - current_thread_info()->restart_block.fn = do_no_restart_syscall; + current->restart_block.fn = do_no_restart_syscall; /* * Since we stacked the signal on a 64-bit boundary, @@ -221,7 +221,7 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs) struct rt_sigframe __user *frame; /* Always make any pending restarted system calls return -EINTR */ - current_thread_info()->restart_block.fn = do_no_restart_syscall; + current->restart_block.fn = do_no_restart_syscall; /* * Since we stacked the signal on a 64-bit boundary, diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c index 2835d35234ca..9a2f882a0a2d 100644 --- a/arch/arm/kernel/suspend.c +++ b/arch/arm/kernel/suspend.c @@ -14,10 +14,6 @@ extern int __cpu_suspend(unsigned long, int (*)(unsigned long), u32 cpuid); extern void cpu_resume_mmu(void); #ifdef CONFIG_MMU -/* - * Hide the first two arguments to __cpu_suspend - these are an implementation - * detail which platform code shouldn't have to know about. - */ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) { struct mm_struct *mm = current->active_mm; diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig index 466bd299b1a8..338ace78ed18 100644 --- a/arch/arm/kvm/Kconfig +++ b/arch/arm/kvm/Kconfig @@ -21,8 +21,11 @@ config KVM select PREEMPT_NOTIFIERS select ANON_INODES select HAVE_KVM_CPU_RELAX_INTERCEPT + select HAVE_KVM_ARCH_TLB_FLUSH_ALL select KVM_MMIO select KVM_ARM_HOST + select KVM_GENERIC_DIRTYLOG_READ_PROTECT + select SRCU depends on ARM_VIRT_EXT && ARM_LPAE ---help--- Support hosting virtualized guest machines. You will also diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile index f7057ed045b6..443b8bea43e9 100644 --- a/arch/arm/kvm/Makefile +++ b/arch/arm/kvm/Makefile @@ -22,4 +22,5 @@ obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o obj-y += coproc.o coproc_a15.o coproc_a7.o mmio.o psci.o perf.o obj-$(CONFIG_KVM_ARM_VGIC) += $(KVM)/arm/vgic.o obj-$(CONFIG_KVM_ARM_VGIC) += $(KVM)/arm/vgic-v2.o +obj-$(CONFIG_KVM_ARM_VGIC) += $(KVM)/arm/vgic-v2-emul.o obj-$(CONFIG_KVM_ARM_TIMER) += $(KVM)/arm/arch_timer.o diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 0b0d58a905c4..5560f74f9eee 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -132,6 +132,9 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) /* Mark the initial VMID generation invalid */ kvm->arch.vmid_gen = 0; + /* The maximum number of VCPUs is limited by the host's GIC model */ + kvm->arch.max_vcpus = kvm_vgic_get_max_vcpus(); + return ret; out_free_stage2_pgd: kvm_free_stage2_pgd(kvm); @@ -218,6 +221,11 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id) goto out; } + if (id >= kvm->arch.max_vcpus) { + err = -EINVAL; + goto out; + } + vcpu = kmem_cache_zalloc(kvm_vcpu_cache, GFP_KERNEL); if (!vcpu) { err = -ENOMEM; @@ -241,9 +249,8 @@ out: return ERR_PTR(err); } -int kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu) +void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu) { - return 0; } void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu) @@ -533,7 +540,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) vcpu->mode = OUTSIDE_GUEST_MODE; kvm_guest_exit(); - trace_kvm_exit(*vcpu_pc(vcpu)); + trace_kvm_exit(kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu)); /* * We may have taken a host interrupt in HYP mode (ie * while executing the guest). This interrupt is still @@ -777,9 +784,39 @@ long kvm_arch_vcpu_ioctl(struct file *filp, } } +/** + * kvm_vm_ioctl_get_dirty_log - get and clear the log of dirty pages in a slot + * @kvm: kvm instance + * @log: slot id and address to which we copy the log + * + * Steps 1-4 below provide general overview of dirty page logging. See + * kvm_get_dirty_log_protect() function description for additional details. + * + * We call kvm_get_dirty_log_protect() to handle steps 1-3, upon return we + * always flush the TLB (step 4) even if previous step failed and the dirty + * bitmap may be corrupt. Regardless of previous outcome the KVM logging API + * does not preclude user space subsequent dirty log read. Flushing TLB ensures + * writes will be marked dirty for next log read. + * + * 1. Take a snapshot of the bit and clear it if needed. + * 2. Write protect the corresponding page. + * 3. Copy the snapshot to the userspace. + * 4. Flush TLB's if needed. + */ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log) { - return -EINVAL; + bool is_dirty = false; + int r; + + mutex_lock(&kvm->slots_lock); + + r = kvm_get_dirty_log_protect(kvm, log, &is_dirty); + + if (is_dirty) + kvm_flush_remote_tlbs(kvm); + + mutex_unlock(&kvm->slots_lock); + return r; } static int kvm_vm_ioctl_set_device_addr(struct kvm *kvm, @@ -811,7 +848,7 @@ long kvm_arch_vm_ioctl(struct file *filp, switch (ioctl) { case KVM_CREATE_IRQCHIP: { if (vgic_present) - return kvm_vgic_create(kvm); + return kvm_vgic_create(kvm, KVM_DEV_TYPE_ARM_VGIC_V2); else return -ENXIO; } @@ -1035,6 +1072,19 @@ static void check_kvm_target_cpu(void *ret) *(int *)ret = kvm_target_cpu(); } +struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr) +{ + struct kvm_vcpu *vcpu; + int i; + + mpidr &= MPIDR_HWID_BITMASK; + kvm_for_each_vcpu(i, vcpu, kvm) { + if (mpidr == kvm_vcpu_get_mpidr_aff(vcpu)) + return vcpu; + } + return NULL; +} + /** * Initialize Hyp-mode and memory mappings on all CPUs. */ diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c index a96a8043277c..95f12b2ccdcb 100644 --- a/arch/arm/kvm/handle_exit.c +++ b/arch/arm/kvm/handle_exit.c @@ -87,11 +87,13 @@ static int handle_dabt_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) */ static int kvm_handle_wfx(struct kvm_vcpu *vcpu, struct kvm_run *run) { - trace_kvm_wfi(*vcpu_pc(vcpu)); - if (kvm_vcpu_get_hsr(vcpu) & HSR_WFI_IS_WFE) + if (kvm_vcpu_get_hsr(vcpu) & HSR_WFI_IS_WFE) { + trace_kvm_wfx(*vcpu_pc(vcpu), true); kvm_vcpu_on_spin(vcpu); - else + } else { + trace_kvm_wfx(*vcpu_pc(vcpu), false); kvm_vcpu_block(vcpu); + } kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S index 01dcb0e752d9..79caf79b304a 100644 --- a/arch/arm/kvm/interrupts.S +++ b/arch/arm/kvm/interrupts.S @@ -66,6 +66,17 @@ ENTRY(__kvm_tlb_flush_vmid_ipa) bx lr ENDPROC(__kvm_tlb_flush_vmid_ipa) +/** + * void __kvm_tlb_flush_vmid(struct kvm *kvm) - Flush per-VMID TLBs + * + * Reuses __kvm_tlb_flush_vmid_ipa() for ARMv7, without passing address + * parameter + */ + +ENTRY(__kvm_tlb_flush_vmid) + b __kvm_tlb_flush_vmid_ipa +ENDPROC(__kvm_tlb_flush_vmid) + /******************************************************************** * Flush TLBs and instruction caches of all CPUs inside the inner-shareable * domain, for all VMIDs diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 136662547ca6..5656d79c5a44 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -45,6 +45,26 @@ static phys_addr_t hyp_idmap_vector; #define hyp_pgd_order get_order(PTRS_PER_PGD * sizeof(pgd_t)) #define kvm_pmd_huge(_x) (pmd_huge(_x) || pmd_trans_huge(_x)) +#define kvm_pud_huge(_x) pud_huge(_x) + +#define KVM_S2PTE_FLAG_IS_IOMAP (1UL << 0) +#define KVM_S2_FLAG_LOGGING_ACTIVE (1UL << 1) + +static bool memslot_is_logging(struct kvm_memory_slot *memslot) +{ + return memslot->dirty_bitmap && !(memslot->flags & KVM_MEM_READONLY); +} + +/** + * kvm_flush_remote_tlbs() - flush all VM TLB entries for v7/8 + * @kvm: pointer to kvm structure. + * + * Interface to HYP function to flush all VM TLB entries + */ +void kvm_flush_remote_tlbs(struct kvm *kvm) +{ + kvm_call_hyp(__kvm_tlb_flush_vmid, kvm); +} static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) { @@ -78,6 +98,25 @@ static void kvm_flush_dcache_pud(pud_t pud) __kvm_flush_dcache_pud(pud); } +/** + * stage2_dissolve_pmd() - clear and flush huge PMD entry + * @kvm: pointer to kvm structure. + * @addr: IPA + * @pmd: pmd pointer for IPA + * + * Function clears a PMD entry, flushes addr 1st and 2nd stage TLBs. Marks all + * pages in the range dirty. + */ +static void stage2_dissolve_pmd(struct kvm *kvm, phys_addr_t addr, pmd_t *pmd) +{ + if (!kvm_pmd_huge(*pmd)) + return; + + pmd_clear(pmd); + kvm_tlb_flush_vmid_ipa(kvm, addr); + put_page(virt_to_page(pmd)); +} + static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache, int min, int max) { @@ -251,7 +290,7 @@ static void unmap_range(struct kvm *kvm, pgd_t *pgdp, phys_addr_t addr = start, end = start + size; phys_addr_t next; - pgd = pgdp + pgd_index(addr); + pgd = pgdp + kvm_pgd_index(addr); do { next = kvm_pgd_addr_end(addr, end); if (!pgd_none(*pgd)) @@ -316,7 +355,7 @@ static void stage2_flush_memslot(struct kvm *kvm, phys_addr_t next; pgd_t *pgd; - pgd = kvm->arch.pgd + pgd_index(addr); + pgd = kvm->arch.pgd + kvm_pgd_index(addr); do { next = kvm_pgd_addr_end(addr, end); stage2_flush_puds(kvm, pgd, addr, next); @@ -593,6 +632,20 @@ int create_hyp_io_mappings(void *from, void *to, phys_addr_t phys_addr) __phys_to_pfn(phys_addr), PAGE_HYP_DEVICE); } +/* Free the HW pgd, one page at a time */ +static void kvm_free_hwpgd(void *hwpgd) +{ + free_pages_exact(hwpgd, kvm_get_hwpgd_size()); +} + +/* Allocate the HW PGD, making sure that each page gets its own refcount */ +static void *kvm_alloc_hwpgd(void) +{ + unsigned int size = kvm_get_hwpgd_size(); + + return alloc_pages_exact(size, GFP_KERNEL | __GFP_ZERO); +} + /** * kvm_alloc_stage2_pgd - allocate level-1 table for stage-2 translation. * @kvm: The KVM struct pointer for the VM. @@ -606,15 +659,31 @@ int create_hyp_io_mappings(void *from, void *to, phys_addr_t phys_addr) */ int kvm_alloc_stage2_pgd(struct kvm *kvm) { - int ret; pgd_t *pgd; + void *hwpgd; if (kvm->arch.pgd != NULL) { kvm_err("kvm_arch already initialized?\n"); return -EINVAL; } + hwpgd = kvm_alloc_hwpgd(); + if (!hwpgd) + return -ENOMEM; + + /* When the kernel uses more levels of page tables than the + * guest, we allocate a fake PGD and pre-populate it to point + * to the next-level page table, which will be the real + * initial page table pointed to by the VTTBR. + * + * When KVM_PREALLOC_LEVEL==2, we allocate a single page for + * the PMD and the kernel will use folded pud. + * When KVM_PREALLOC_LEVEL==1, we allocate 2 consecutive PUD + * pages. + */ if (KVM_PREALLOC_LEVEL > 0) { + int i; + /* * Allocate fake pgd for the page table manipulation macros to * work. This is not used by the hardware and we have no @@ -622,30 +691,32 @@ int kvm_alloc_stage2_pgd(struct kvm *kvm) */ pgd = (pgd_t *)kmalloc(PTRS_PER_S2_PGD * sizeof(pgd_t), GFP_KERNEL | __GFP_ZERO); + + if (!pgd) { + kvm_free_hwpgd(hwpgd); + return -ENOMEM; + } + + /* Plug the HW PGD into the fake one. */ + for (i = 0; i < PTRS_PER_S2_PGD; i++) { + if (KVM_PREALLOC_LEVEL == 1) + pgd_populate(NULL, pgd + i, + (pud_t *)hwpgd + i * PTRS_PER_PUD); + else if (KVM_PREALLOC_LEVEL == 2) + pud_populate(NULL, pud_offset(pgd, 0) + i, + (pmd_t *)hwpgd + i * PTRS_PER_PMD); + } } else { /* * Allocate actual first-level Stage-2 page table used by the * hardware for Stage-2 page table walks. */ - pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, S2_PGD_ORDER); + pgd = (pgd_t *)hwpgd; } - if (!pgd) - return -ENOMEM; - - ret = kvm_prealloc_hwpgd(kvm, pgd); - if (ret) - goto out_err; - kvm_clean_pgd(pgd); kvm->arch.pgd = pgd; return 0; -out_err: - if (KVM_PREALLOC_LEVEL > 0) - kfree(pgd); - else - free_pages((unsigned long)pgd, S2_PGD_ORDER); - return ret; } /** @@ -746,11 +817,10 @@ void kvm_free_stage2_pgd(struct kvm *kvm) return; unmap_stage2_range(kvm, 0, KVM_PHYS_SIZE); - kvm_free_hwpgd(kvm); + kvm_free_hwpgd(kvm_get_hwpgd(kvm)); if (KVM_PREALLOC_LEVEL > 0) kfree(kvm->arch.pgd); - else - free_pages((unsigned long)kvm->arch.pgd, S2_PGD_ORDER); + kvm->arch.pgd = NULL; } @@ -760,7 +830,7 @@ static pud_t *stage2_get_pud(struct kvm *kvm, struct kvm_mmu_memory_cache *cache pgd_t *pgd; pud_t *pud; - pgd = kvm->arch.pgd + pgd_index(addr); + pgd = kvm->arch.pgd + kvm_pgd_index(addr); if (WARN_ON(pgd_none(*pgd))) { if (!cache) return NULL; @@ -819,10 +889,15 @@ static int stage2_set_pmd_huge(struct kvm *kvm, struct kvm_mmu_memory_cache } static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache, - phys_addr_t addr, const pte_t *new_pte, bool iomap) + phys_addr_t addr, const pte_t *new_pte, + unsigned long flags) { pmd_t *pmd; pte_t *pte, old_pte; + bool iomap = flags & KVM_S2PTE_FLAG_IS_IOMAP; + bool logging_active = flags & KVM_S2_FLAG_LOGGING_ACTIVE; + + VM_BUG_ON(logging_active && !cache); /* Create stage-2 page table mapping - Levels 0 and 1 */ pmd = stage2_get_pmd(kvm, cache, addr); @@ -834,6 +909,13 @@ static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache, return 0; } + /* + * While dirty page logging - dissolve huge PMD, then continue on to + * allocate page. + */ + if (logging_active) + stage2_dissolve_pmd(kvm, addr, pmd); + /* Create stage-2 page mappings - Level 2 */ if (pmd_none(*pmd)) { if (!cache) @@ -890,7 +972,8 @@ int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa, if (ret) goto out; spin_lock(&kvm->mmu_lock); - ret = stage2_set_pte(kvm, &cache, addr, &pte, true); + ret = stage2_set_pte(kvm, &cache, addr, &pte, + KVM_S2PTE_FLAG_IS_IOMAP); spin_unlock(&kvm->mmu_lock); if (ret) goto out; @@ -957,6 +1040,165 @@ static bool kvm_is_device_pfn(unsigned long pfn) return !pfn_valid(pfn); } +/** + * stage2_wp_ptes - write protect PMD range + * @pmd: pointer to pmd entry + * @addr: range start address + * @end: range end address + */ +static void stage2_wp_ptes(pmd_t *pmd, phys_addr_t addr, phys_addr_t end) +{ + pte_t *pte; + + pte = pte_offset_kernel(pmd, addr); + do { + if (!pte_none(*pte)) { + if (!kvm_s2pte_readonly(pte)) + kvm_set_s2pte_readonly(pte); + } + } while (pte++, addr += PAGE_SIZE, addr != end); +} + +/** + * stage2_wp_pmds - write protect PUD range + * @pud: pointer to pud entry + * @addr: range start address + * @end: range end address + */ +static void stage2_wp_pmds(pud_t *pud, phys_addr_t addr, phys_addr_t end) +{ + pmd_t *pmd; + phys_addr_t next; + + pmd = pmd_offset(pud, addr); + + do { + next = kvm_pmd_addr_end(addr, end); + if (!pmd_none(*pmd)) { + if (kvm_pmd_huge(*pmd)) { + if (!kvm_s2pmd_readonly(pmd)) + kvm_set_s2pmd_readonly(pmd); + } else { + stage2_wp_ptes(pmd, addr, next); + } + } + } while (pmd++, addr = next, addr != end); +} + +/** + * stage2_wp_puds - write protect PGD range + * @pgd: pointer to pgd entry + * @addr: range start address + * @end: range end address + * + * Process PUD entries, for a huge PUD we cause a panic. + */ +static void stage2_wp_puds(pgd_t *pgd, phys_addr_t addr, phys_addr_t end) +{ + pud_t *pud; + phys_addr_t next; + + pud = pud_offset(pgd, addr); + do { + next = kvm_pud_addr_end(addr, end); + if (!pud_none(*pud)) { + /* TODO:PUD not supported, revisit later if supported */ + BUG_ON(kvm_pud_huge(*pud)); + stage2_wp_pmds(pud, addr, next); + } + } while (pud++, addr = next, addr != end); +} + +/** + * stage2_wp_range() - write protect stage2 memory region range + * @kvm: The KVM pointer + * @addr: Start address of range + * @end: End address of range + */ +static void stage2_wp_range(struct kvm *kvm, phys_addr_t addr, phys_addr_t end) +{ + pgd_t *pgd; + phys_addr_t next; + + pgd = kvm->arch.pgd + kvm_pgd_index(addr); + do { + /* + * Release kvm_mmu_lock periodically if the memory region is + * large. Otherwise, we may see kernel panics with + * CONFIG_DETECT_HUNG_TASK, CONFIG_LOCKUP_DETECTOR, + * CONFIG_LOCKDEP. Additionally, holding the lock too long + * will also starve other vCPUs. + */ + if (need_resched() || spin_needbreak(&kvm->mmu_lock)) + cond_resched_lock(&kvm->mmu_lock); + + next = kvm_pgd_addr_end(addr, end); + if (pgd_present(*pgd)) + stage2_wp_puds(pgd, addr, next); + } while (pgd++, addr = next, addr != end); +} + +/** + * kvm_mmu_wp_memory_region() - write protect stage 2 entries for memory slot + * @kvm: The KVM pointer + * @slot: The memory slot to write protect + * + * Called to start logging dirty pages after memory region + * KVM_MEM_LOG_DIRTY_PAGES operation is called. After this function returns + * all present PMD and PTEs are write protected in the memory region. + * Afterwards read of dirty page log can be called. + * + * Acquires kvm_mmu_lock. Called with kvm->slots_lock mutex acquired, + * serializing operations for VM memory regions. + */ +void kvm_mmu_wp_memory_region(struct kvm *kvm, int slot) +{ + struct kvm_memory_slot *memslot = id_to_memslot(kvm->memslots, slot); + phys_addr_t start = memslot->base_gfn << PAGE_SHIFT; + phys_addr_t end = (memslot->base_gfn + memslot->npages) << PAGE_SHIFT; + + spin_lock(&kvm->mmu_lock); + stage2_wp_range(kvm, start, end); + spin_unlock(&kvm->mmu_lock); + kvm_flush_remote_tlbs(kvm); +} + +/** + * kvm_mmu_write_protect_pt_masked() - write protect dirty pages + * @kvm: The KVM pointer + * @slot: The memory slot associated with mask + * @gfn_offset: The gfn offset in memory slot + * @mask: The mask of dirty pages at offset 'gfn_offset' in this memory + * slot to be write protected + * + * Walks bits set in mask write protects the associated pte's. Caller must + * acquire kvm_mmu_lock. + */ +static void kvm_mmu_write_protect_pt_masked(struct kvm *kvm, + struct kvm_memory_slot *slot, + gfn_t gfn_offset, unsigned long mask) +{ + phys_addr_t base_gfn = slot->base_gfn + gfn_offset; + phys_addr_t start = (base_gfn + __ffs(mask)) << PAGE_SHIFT; + phys_addr_t end = (base_gfn + __fls(mask) + 1) << PAGE_SHIFT; + + stage2_wp_range(kvm, start, end); +} + +/* + * kvm_arch_mmu_enable_log_dirty_pt_masked - enable dirty logging for selected + * dirty pages. + * + * It calls kvm_mmu_write_protect_pt_masked to write protect selected pages to + * enable dirty logging for them. + */ +void kvm_arch_mmu_enable_log_dirty_pt_masked(struct kvm *kvm, + struct kvm_memory_slot *slot, + gfn_t gfn_offset, unsigned long mask) +{ + kvm_mmu_write_protect_pt_masked(kvm, slot, gfn_offset, mask); +} + static void coherent_cache_guest_page(struct kvm_vcpu *vcpu, pfn_t pfn, unsigned long size, bool uncached) { @@ -977,6 +1219,8 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, pfn_t pfn; pgprot_t mem_type = PAGE_S2; bool fault_ipa_uncached; + bool logging_active = memslot_is_logging(memslot); + unsigned long flags = 0; write_fault = kvm_is_write_fault(vcpu); if (fault_status == FSC_PERM && !write_fault) { @@ -993,7 +1237,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, return -EFAULT; } - if (is_vm_hugetlb_page(vma)) { + if (is_vm_hugetlb_page(vma) && !logging_active) { hugetlb = true; gfn = (fault_ipa & PMD_MASK) >> PAGE_SHIFT; } else { @@ -1034,12 +1278,30 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, if (is_error_pfn(pfn)) return -EFAULT; - if (kvm_is_device_pfn(pfn)) + if (kvm_is_device_pfn(pfn)) { mem_type = PAGE_S2_DEVICE; + flags |= KVM_S2PTE_FLAG_IS_IOMAP; + } else if (logging_active) { + /* + * Faults on pages in a memslot with logging enabled + * should not be mapped with huge pages (it introduces churn + * and performance degradation), so force a pte mapping. + */ + force_pte = true; + flags |= KVM_S2_FLAG_LOGGING_ACTIVE; + + /* + * Only actually map the page as writable if this was a write + * fault. + */ + if (!write_fault) + writable = false; + } spin_lock(&kvm->mmu_lock); if (mmu_notifier_retry(kvm, mmu_seq)) goto out_unlock; + if (!hugetlb && !force_pte) hugetlb = transparent_hugepage_adjust(&pfn, &fault_ipa); @@ -1056,16 +1318,16 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, ret = stage2_set_pmd_huge(kvm, memcache, fault_ipa, &new_pmd); } else { pte_t new_pte = pfn_pte(pfn, mem_type); + if (writable) { kvm_set_s2pte_writable(&new_pte); kvm_set_pfn_dirty(pfn); + mark_page_dirty(kvm, gfn); } coherent_cache_guest_page(vcpu, pfn, PAGE_SIZE, fault_ipa_uncached); - ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte, - pgprot_val(mem_type) == pgprot_val(PAGE_S2_DEVICE)); + ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte, flags); } - out_unlock: spin_unlock(&kvm->mmu_lock); kvm_release_pfn_clean(pfn); @@ -1215,7 +1477,14 @@ static void kvm_set_spte_handler(struct kvm *kvm, gpa_t gpa, void *data) { pte_t *pte = (pte_t *)data; - stage2_set_pte(kvm, NULL, gpa, pte, false); + /* + * We can always call stage2_set_pte with KVM_S2PTE_FLAG_LOGGING_ACTIVE + * flag clear because MMU notifiers will have unmapped a huge PMD before + * calling ->change_pte() (which in turn calls kvm_set_spte_hva()) and + * therefore stage2_set_pte() never needs to clear out a huge PMD + * through this calling path. + */ + stage2_set_pte(kvm, NULL, gpa, pte, 0); } @@ -1348,6 +1617,13 @@ void kvm_arch_commit_memory_region(struct kvm *kvm, const struct kvm_memory_slot *old, enum kvm_mr_change change) { + /* + * At this point memslot has been committed and there is an + * allocated dirty_bitmap[], dirty pages will be be tracked while the + * memory slot is write protected. + */ + if (change != KVM_MR_DELETE && mem->flags & KVM_MEM_LOG_DIRTY_PAGES) + kvm_mmu_wp_memory_region(kvm, mem->slot); } int kvm_arch_prepare_memory_region(struct kvm *kvm, @@ -1360,7 +1636,8 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm, bool writable = !(mem->flags & KVM_MEM_READONLY); int ret = 0; - if (change != KVM_MR_CREATE && change != KVM_MR_MOVE) + if (change != KVM_MR_CREATE && change != KVM_MR_MOVE && + change != KVM_MR_FLAGS_ONLY) return 0; /* @@ -1411,6 +1688,10 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm, phys_addr_t pa = (vma->vm_pgoff << PAGE_SHIFT) + vm_start - vma->vm_start; + /* IO region dirty page logging not allowed */ + if (memslot->flags & KVM_MEM_LOG_DIRTY_PAGES) + return -EINVAL; + ret = kvm_phys_addr_ioremap(kvm, gpa, pa, vm_end - vm_start, writable); @@ -1420,6 +1701,9 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm, hva = vm_end; } while (hva < reg_end); + if (change == KVM_MR_FLAGS_ONLY) + return ret; + spin_lock(&kvm->mmu_lock); if (ret) unmap_stage2_range(kvm, mem->guest_phys_addr, mem->memory_size); diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c index 58cb3248d277..02fa8eff6ae1 100644 --- a/arch/arm/kvm/psci.c +++ b/arch/arm/kvm/psci.c @@ -22,6 +22,7 @@ #include <asm/cputype.h> #include <asm/kvm_emulate.h> #include <asm/kvm_psci.h> +#include <asm/kvm_host.h> /* * This is an implementation of the Power State Coordination Interface @@ -66,25 +67,17 @@ static void kvm_psci_vcpu_off(struct kvm_vcpu *vcpu) static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) { struct kvm *kvm = source_vcpu->kvm; - struct kvm_vcpu *vcpu = NULL, *tmp; + struct kvm_vcpu *vcpu = NULL; wait_queue_head_t *wq; unsigned long cpu_id; unsigned long context_id; - unsigned long mpidr; phys_addr_t target_pc; - int i; - cpu_id = *vcpu_reg(source_vcpu, 1); + cpu_id = *vcpu_reg(source_vcpu, 1) & MPIDR_HWID_BITMASK; if (vcpu_mode_is_32bit(source_vcpu)) cpu_id &= ~((u32) 0); - kvm_for_each_vcpu(i, tmp, kvm) { - mpidr = kvm_vcpu_get_mpidr(tmp); - if ((mpidr & MPIDR_HWID_BITMASK) == (cpu_id & MPIDR_HWID_BITMASK)) { - vcpu = tmp; - break; - } - } + vcpu = kvm_mpidr_to_vcpu(kvm, cpu_id); /* * Make sure the caller requested a valid CPU and that the CPU is @@ -155,7 +148,7 @@ static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu) * then ON else OFF */ kvm_for_each_vcpu(i, tmp, kvm) { - mpidr = kvm_vcpu_get_mpidr(tmp); + mpidr = kvm_vcpu_get_mpidr_aff(tmp); if (((mpidr & target_affinity_mask) == target_affinity) && !tmp->arch.pause) { return PSCI_0_2_AFFINITY_LEVEL_ON; diff --git a/arch/arm/kvm/trace.h b/arch/arm/kvm/trace.h index b6a6e7102201..6817664b46b8 100644 --- a/arch/arm/kvm/trace.h +++ b/arch/arm/kvm/trace.h @@ -25,18 +25,22 @@ TRACE_EVENT(kvm_entry, ); TRACE_EVENT(kvm_exit, - TP_PROTO(unsigned long vcpu_pc), - TP_ARGS(vcpu_pc), + TP_PROTO(unsigned int exit_reason, unsigned long vcpu_pc), + TP_ARGS(exit_reason, vcpu_pc), TP_STRUCT__entry( + __field( unsigned int, exit_reason ) __field( unsigned long, vcpu_pc ) ), TP_fast_assign( + __entry->exit_reason = exit_reason; __entry->vcpu_pc = vcpu_pc; ), - TP_printk("PC: 0x%08lx", __entry->vcpu_pc) + TP_printk("HSR_EC: 0x%04x, PC: 0x%08lx", + __entry->exit_reason, + __entry->vcpu_pc) ); TRACE_EVENT(kvm_guest_fault, @@ -140,19 +144,22 @@ TRACE_EVENT(kvm_emulate_cp15_imp, __entry->CRm, __entry->Op2) ); -TRACE_EVENT(kvm_wfi, - TP_PROTO(unsigned long vcpu_pc), - TP_ARGS(vcpu_pc), +TRACE_EVENT(kvm_wfx, + TP_PROTO(unsigned long vcpu_pc, bool is_wfe), + TP_ARGS(vcpu_pc, is_wfe), TP_STRUCT__entry( __field( unsigned long, vcpu_pc ) + __field( bool, is_wfe ) ), TP_fast_assign( __entry->vcpu_pc = vcpu_pc; + __entry->is_wfe = is_wfe; ), - TP_printk("guest executed wfi at: 0x%08lx", __entry->vcpu_pc) + TP_printk("guest executed wf%c at: 0x%08lx", + __entry->is_wfe ? 'e' : 'i', __entry->vcpu_pc) ); TRACE_EVENT(kvm_unmap_hva, diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 0573faab96ad..d8a780799506 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -15,19 +15,8 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ io-readsb.o io-writesb.o io-readsl.o io-writesl.o \ call_with_stack.o bswapsdi2.o -mmu-y := clear_user.o copy_page.o getuser.o putuser.o - -# the code in uaccess.S is not preemption safe and -# probably faster on ARMv3 only -ifeq ($(CONFIG_PREEMPT),y) - mmu-y += copy_from_user.o copy_to_user.o -else -ifneq ($(CONFIG_CPU_32v3),y) - mmu-y += copy_from_user.o copy_to_user.o -else - mmu-y += uaccess.o -endif -endif +mmu-y := clear_user.o copy_page.o getuser.o putuser.o \ + copy_from_user.o copy_to_user.o # using lib_ here won't override already available weak symbols obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S deleted file mode 100644 index e50520904b76..000000000000 --- a/arch/arm/lib/uaccess.S +++ /dev/null @@ -1,564 +0,0 @@ -/* - * linux/arch/arm/lib/uaccess.S - * - * Copyright (C) 1995, 1996,1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Routines to block copy data to/from user memory - * These are highly optimised both for the 4k page size - * and for various alignments. - */ -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <asm/errno.h> -#include <asm/domain.h> - - .text - -#define PAGE_SHIFT 12 - -/* Prototype: int __copy_to_user(void *to, const char *from, size_t n) - * Purpose : copy a block to user memory from kernel memory - * Params : to - user memory - * : from - kernel memory - * : n - number of bytes to copy - * Returns : Number of bytes NOT copied. - */ - -.Lc2u_dest_not_aligned: - rsb ip, ip, #4 - cmp ip, #2 - ldrb r3, [r1], #1 -USER( TUSER( strb) r3, [r0], #1) @ May fault - ldrgeb r3, [r1], #1 -USER( TUSER( strgeb) r3, [r0], #1) @ May fault - ldrgtb r3, [r1], #1 -USER( TUSER( strgtb) r3, [r0], #1) @ May fault - sub r2, r2, ip - b .Lc2u_dest_aligned - -ENTRY(__copy_to_user) - stmfd sp!, {r2, r4 - r7, lr} - cmp r2, #4 - blt .Lc2u_not_enough - ands ip, r0, #3 - bne .Lc2u_dest_not_aligned -.Lc2u_dest_aligned: - - ands ip, r1, #3 - bne .Lc2u_src_not_aligned -/* - * Seeing as there has to be at least 8 bytes to copy, we can - * copy one word, and force a user-mode page fault... - */ - -.Lc2u_0fupi: subs r2, r2, #4 - addmi ip, r2, #4 - bmi .Lc2u_0nowords - ldr r3, [r1], #4 -USER( TUSER( str) r3, [r0], #4) @ May fault - mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction - rsb ip, ip, #0 - movs ip, ip, lsr #32 - PAGE_SHIFT - beq .Lc2u_0fupi -/* - * ip = max no. of bytes to copy before needing another "strt" insn - */ - cmp r2, ip - movlt ip, r2 - sub r2, r2, ip - subs ip, ip, #32 - blt .Lc2u_0rem8lp - -.Lc2u_0cpy8lp: ldmia r1!, {r3 - r6} - stmia r0!, {r3 - r6} @ Shouldnt fault - ldmia r1!, {r3 - r6} - subs ip, ip, #32 - stmia r0!, {r3 - r6} @ Shouldnt fault - bpl .Lc2u_0cpy8lp - -.Lc2u_0rem8lp: cmn ip, #16 - ldmgeia r1!, {r3 - r6} - stmgeia r0!, {r3 - r6} @ Shouldnt fault - tst ip, #8 - ldmneia r1!, {r3 - r4} - stmneia r0!, {r3 - r4} @ Shouldnt fault - tst ip, #4 - ldrne r3, [r1], #4 - TUSER( strne) r3, [r0], #4 @ Shouldnt fault - ands ip, ip, #3 - beq .Lc2u_0fupi -.Lc2u_0nowords: teq ip, #0 - beq .Lc2u_finished -.Lc2u_nowords: cmp ip, #2 - ldrb r3, [r1], #1 -USER( TUSER( strb) r3, [r0], #1) @ May fault - ldrgeb r3, [r1], #1 -USER( TUSER( strgeb) r3, [r0], #1) @ May fault - ldrgtb r3, [r1], #1 -USER( TUSER( strgtb) r3, [r0], #1) @ May fault - b .Lc2u_finished - -.Lc2u_not_enough: - movs ip, r2 - bne .Lc2u_nowords -.Lc2u_finished: mov r0, #0 - ldmfd sp!, {r2, r4 - r7, pc} - -.Lc2u_src_not_aligned: - bic r1, r1, #3 - ldr r7, [r1], #4 - cmp ip, #2 - bgt .Lc2u_3fupi - beq .Lc2u_2fupi -.Lc2u_1fupi: subs r2, r2, #4 - addmi ip, r2, #4 - bmi .Lc2u_1nowords - mov r3, r7, lspull #8 - ldr r7, [r1], #4 - orr r3, r3, r7, lspush #24 -USER( TUSER( str) r3, [r0], #4) @ May fault - mov ip, r0, lsl #32 - PAGE_SHIFT - rsb ip, ip, #0 - movs ip, ip, lsr #32 - PAGE_SHIFT - beq .Lc2u_1fupi - cmp r2, ip - movlt ip, r2 - sub r2, r2, ip - subs ip, ip, #16 - blt .Lc2u_1rem8lp - -.Lc2u_1cpy8lp: mov r3, r7, lspull #8 - ldmia r1!, {r4 - r7} - subs ip, ip, #16 - orr r3, r3, r4, lspush #24 - mov r4, r4, lspull #8 - orr r4, r4, r5, lspush #24 - mov r5, r5, lspull #8 - orr r5, r5, r6, lspush #24 - mov r6, r6, lspull #8 - orr r6, r6, r7, lspush #24 - stmia r0!, {r3 - r6} @ Shouldnt fault - bpl .Lc2u_1cpy8lp - -.Lc2u_1rem8lp: tst ip, #8 - movne r3, r7, lspull #8 - ldmneia r1!, {r4, r7} - orrne r3, r3, r4, lspush #24 - movne r4, r4, lspull #8 - orrne r4, r4, r7, lspush #24 - stmneia r0!, {r3 - r4} @ Shouldnt fault - tst ip, #4 - movne r3, r7, lspull #8 - ldrne r7, [r1], #4 - orrne r3, r3, r7, lspush #24 - TUSER( strne) r3, [r0], #4 @ Shouldnt fault - ands ip, ip, #3 - beq .Lc2u_1fupi -.Lc2u_1nowords: mov r3, r7, get_byte_1 - teq ip, #0 - beq .Lc2u_finished - cmp ip, #2 -USER( TUSER( strb) r3, [r0], #1) @ May fault - movge r3, r7, get_byte_2 -USER( TUSER( strgeb) r3, [r0], #1) @ May fault - movgt r3, r7, get_byte_3 -USER( TUSER( strgtb) r3, [r0], #1) @ May fault - b .Lc2u_finished - -.Lc2u_2fupi: subs r2, r2, #4 - addmi ip, r2, #4 - bmi .Lc2u_2nowords - mov r3, r7, lspull #16 - ldr r7, [r1], #4 - orr r3, r3, r7, lspush #16 -USER( TUSER( str) r3, [r0], #4) @ May fault - mov ip, r0, lsl #32 - PAGE_SHIFT - rsb ip, ip, #0 - movs ip, ip, lsr #32 - PAGE_SHIFT - beq .Lc2u_2fupi - cmp r2, ip - movlt ip, r2 - sub r2, r2, ip - subs ip, ip, #16 - blt .Lc2u_2rem8lp - -.Lc2u_2cpy8lp: mov r3, r7, lspull #16 - ldmia r1!, {r4 - r7} - subs ip, ip, #16 - orr r3, r3, r4, lspush #16 - mov r4, r4, lspull #16 - orr r4, r4, r5, lspush #16 - mov r5, r5, lspull #16 - orr r5, r5, r6, lspush #16 - mov r6, r6, lspull #16 - orr r6, r6, r7, lspush #16 - stmia r0!, {r3 - r6} @ Shouldnt fault - bpl .Lc2u_2cpy8lp - -.Lc2u_2rem8lp: tst ip, #8 - movne r3, r7, lspull #16 - ldmneia r1!, {r4, r7} - orrne r3, r3, r4, lspush #16 - movne r4, r4, lspull #16 - orrne r4, r4, r7, lspush #16 - stmneia r0!, {r3 - r4} @ Shouldnt fault - tst ip, #4 - movne r3, r7, lspull #16 - ldrne r7, [r1], #4 - orrne r3, r3, r7, lspush #16 - TUSER( strne) r3, [r0], #4 @ Shouldnt fault - ands ip, ip, #3 - beq .Lc2u_2fupi -.Lc2u_2nowords: mov r3, r7, get_byte_2 - teq ip, #0 - beq .Lc2u_finished - cmp ip, #2 -USER( TUSER( strb) r3, [r0], #1) @ May fault - movge r3, r7, get_byte_3 -USER( TUSER( strgeb) r3, [r0], #1) @ May fault - ldrgtb r3, [r1], #0 -USER( TUSER( strgtb) r3, [r0], #1) @ May fault - b .Lc2u_finished - -.Lc2u_3fupi: subs r2, r2, #4 - addmi ip, r2, #4 - bmi .Lc2u_3nowords - mov r3, r7, lspull #24 - ldr r7, [r1], #4 - orr r3, r3, r7, lspush #8 -USER( TUSER( str) r3, [r0], #4) @ May fault - mov ip, r0, lsl #32 - PAGE_SHIFT - rsb ip, ip, #0 - movs ip, ip, lsr #32 - PAGE_SHIFT - beq .Lc2u_3fupi - cmp r2, ip - movlt ip, r2 - sub r2, r2, ip - subs ip, ip, #16 - blt .Lc2u_3rem8lp - -.Lc2u_3cpy8lp: mov r3, r7, lspull #24 - ldmia r1!, {r4 - r7} - subs ip, ip, #16 - orr r3, r3, r4, lspush #8 - mov r4, r4, lspull #24 - orr r4, r4, r5, lspush #8 - mov r5, r5, lspull #24 - orr r5, r5, r6, lspush #8 - mov r6, r6, lspull #24 - orr r6, r6, r7, lspush #8 - stmia r0!, {r3 - r6} @ Shouldnt fault - bpl .Lc2u_3cpy8lp - -.Lc2u_3rem8lp: tst ip, #8 - movne r3, r7, lspull #24 - ldmneia r1!, {r4, r7} - orrne r3, r3, r4, lspush #8 - movne r4, r4, lspull #24 - orrne r4, r4, r7, lspush #8 - stmneia r0!, {r3 - r4} @ Shouldnt fault - tst ip, #4 - movne r3, r7, lspull #24 - ldrne r7, [r1], #4 - orrne r3, r3, r7, lspush #8 - TUSER( strne) r3, [r0], #4 @ Shouldnt fault - ands ip, ip, #3 - beq .Lc2u_3fupi -.Lc2u_3nowords: mov r3, r7, get_byte_3 - teq ip, #0 - beq .Lc2u_finished - cmp ip, #2 -USER( TUSER( strb) r3, [r0], #1) @ May fault - ldrgeb r3, [r1], #1 -USER( TUSER( strgeb) r3, [r0], #1) @ May fault - ldrgtb r3, [r1], #0 -USER( TUSER( strgtb) r3, [r0], #1) @ May fault - b .Lc2u_finished -ENDPROC(__copy_to_user) - - .pushsection .fixup,"ax" - .align 0 -9001: ldmfd sp!, {r0, r4 - r7, pc} - .popsection - -/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n); - * Purpose : copy a block from user memory to kernel memory - * Params : to - kernel memory - * : from - user memory - * : n - number of bytes to copy - * Returns : Number of bytes NOT copied. - */ -.Lcfu_dest_not_aligned: - rsb ip, ip, #4 - cmp ip, #2 -USER( TUSER( ldrb) r3, [r1], #1) @ May fault - strb r3, [r0], #1 -USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault - strgeb r3, [r0], #1 -USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault - strgtb r3, [r0], #1 - sub r2, r2, ip - b .Lcfu_dest_aligned - -ENTRY(__copy_from_user) - stmfd sp!, {r0, r2, r4 - r7, lr} - cmp r2, #4 - blt .Lcfu_not_enough - ands ip, r0, #3 - bne .Lcfu_dest_not_aligned -.Lcfu_dest_aligned: - ands ip, r1, #3 - bne .Lcfu_src_not_aligned - -/* - * Seeing as there has to be at least 8 bytes to copy, we can - * copy one word, and force a user-mode page fault... - */ - -.Lcfu_0fupi: subs r2, r2, #4 - addmi ip, r2, #4 - bmi .Lcfu_0nowords -USER( TUSER( ldr) r3, [r1], #4) - str r3, [r0], #4 - mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction - rsb ip, ip, #0 - movs ip, ip, lsr #32 - PAGE_SHIFT - beq .Lcfu_0fupi -/* - * ip = max no. of bytes to copy before needing another "strt" insn - */ - cmp r2, ip - movlt ip, r2 - sub r2, r2, ip - subs ip, ip, #32 - blt .Lcfu_0rem8lp - -.Lcfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault - stmia r0!, {r3 - r6} - ldmia r1!, {r3 - r6} @ Shouldnt fault - subs ip, ip, #32 - stmia r0!, {r3 - r6} - bpl .Lcfu_0cpy8lp - -.Lcfu_0rem8lp: cmn ip, #16 - ldmgeia r1!, {r3 - r6} @ Shouldnt fault - stmgeia r0!, {r3 - r6} - tst ip, #8 - ldmneia r1!, {r3 - r4} @ Shouldnt fault - stmneia r0!, {r3 - r4} - tst ip, #4 - TUSER( ldrne) r3, [r1], #4 @ Shouldnt fault - strne r3, [r0], #4 - ands ip, ip, #3 - beq .Lcfu_0fupi -.Lcfu_0nowords: teq ip, #0 - beq .Lcfu_finished -.Lcfu_nowords: cmp ip, #2 -USER( TUSER( ldrb) r3, [r1], #1) @ May fault - strb r3, [r0], #1 -USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault - strgeb r3, [r0], #1 -USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault - strgtb r3, [r0], #1 - b .Lcfu_finished - -.Lcfu_not_enough: - movs ip, r2 - bne .Lcfu_nowords -.Lcfu_finished: mov r0, #0 - add sp, sp, #8 - ldmfd sp!, {r4 - r7, pc} - -.Lcfu_src_not_aligned: - bic r1, r1, #3 -USER( TUSER( ldr) r7, [r1], #4) @ May fault - cmp ip, #2 - bgt .Lcfu_3fupi - beq .Lcfu_2fupi -.Lcfu_1fupi: subs r2, r2, #4 - addmi ip, r2, #4 - bmi .Lcfu_1nowords - mov r3, r7, lspull #8 -USER( TUSER( ldr) r7, [r1], #4) @ May fault - orr r3, r3, r7, lspush #24 - str r3, [r0], #4 - mov ip, r1, lsl #32 - PAGE_SHIFT - rsb ip, ip, #0 - movs ip, ip, lsr #32 - PAGE_SHIFT - beq .Lcfu_1fupi - cmp r2, ip - movlt ip, r2 - sub r2, r2, ip - subs ip, ip, #16 - blt .Lcfu_1rem8lp - -.Lcfu_1cpy8lp: mov r3, r7, lspull #8 - ldmia r1!, {r4 - r7} @ Shouldnt fault - subs ip, ip, #16 - orr r3, r3, r4, lspush #24 - mov r4, r4, lspull #8 - orr r4, r4, r5, lspush #24 - mov r5, r5, lspull #8 - orr r5, r5, r6, lspush #24 - mov r6, r6, lspull #8 - orr r6, r6, r7, lspush #24 - stmia r0!, {r3 - r6} - bpl .Lcfu_1cpy8lp - -.Lcfu_1rem8lp: tst ip, #8 - movne r3, r7, lspull #8 - ldmneia r1!, {r4, r7} @ Shouldnt fault - orrne r3, r3, r4, lspush #24 - movne r4, r4, lspull #8 - orrne r4, r4, r7, lspush #24 - stmneia r0!, {r3 - r4} - tst ip, #4 - movne r3, r7, lspull #8 -USER( TUSER( ldrne) r7, [r1], #4) @ May fault - orrne r3, r3, r7, lspush #24 - strne r3, [r0], #4 - ands ip, ip, #3 - beq .Lcfu_1fupi -.Lcfu_1nowords: mov r3, r7, get_byte_1 - teq ip, #0 - beq .Lcfu_finished - cmp ip, #2 - strb r3, [r0], #1 - movge r3, r7, get_byte_2 - strgeb r3, [r0], #1 - movgt r3, r7, get_byte_3 - strgtb r3, [r0], #1 - b .Lcfu_finished - -.Lcfu_2fupi: subs r2, r2, #4 - addmi ip, r2, #4 - bmi .Lcfu_2nowords - mov r3, r7, lspull #16 -USER( TUSER( ldr) r7, [r1], #4) @ May fault - orr r3, r3, r7, lspush #16 - str r3, [r0], #4 - mov ip, r1, lsl #32 - PAGE_SHIFT - rsb ip, ip, #0 - movs ip, ip, lsr #32 - PAGE_SHIFT - beq .Lcfu_2fupi - cmp r2, ip - movlt ip, r2 - sub r2, r2, ip - subs ip, ip, #16 - blt .Lcfu_2rem8lp - - -.Lcfu_2cpy8lp: mov r3, r7, lspull #16 - ldmia r1!, {r4 - r7} @ Shouldnt fault - subs ip, ip, #16 - orr r3, r3, r4, lspush #16 - mov r4, r4, lspull #16 - orr r4, r4, r5, lspush #16 - mov r5, r5, lspull #16 - orr r5, r5, r6, lspush #16 - mov r6, r6, lspull #16 - orr r6, r6, r7, lspush #16 - stmia r0!, {r3 - r6} - bpl .Lcfu_2cpy8lp - -.Lcfu_2rem8lp: tst ip, #8 - movne r3, r7, lspull #16 - ldmneia r1!, {r4, r7} @ Shouldnt fault - orrne r3, r3, r4, lspush #16 - movne r4, r4, lspull #16 - orrne r4, r4, r7, lspush #16 - stmneia r0!, {r3 - r4} - tst ip, #4 - movne r3, r7, lspull #16 -USER( TUSER( ldrne) r7, [r1], #4) @ May fault - orrne r3, r3, r7, lspush #16 - strne r3, [r0], #4 - ands ip, ip, #3 - beq .Lcfu_2fupi -.Lcfu_2nowords: mov r3, r7, get_byte_2 - teq ip, #0 - beq .Lcfu_finished - cmp ip, #2 - strb r3, [r0], #1 - movge r3, r7, get_byte_3 - strgeb r3, [r0], #1 -USER( TUSER( ldrgtb) r3, [r1], #0) @ May fault - strgtb r3, [r0], #1 - b .Lcfu_finished - -.Lcfu_3fupi: subs r2, r2, #4 - addmi ip, r2, #4 - bmi .Lcfu_3nowords - mov r3, r7, lspull #24 -USER( TUSER( ldr) r7, [r1], #4) @ May fault - orr r3, r3, r7, lspush #8 - str r3, [r0], #4 - mov ip, r1, lsl #32 - PAGE_SHIFT - rsb ip, ip, #0 - movs ip, ip, lsr #32 - PAGE_SHIFT - beq .Lcfu_3fupi - cmp r2, ip - movlt ip, r2 - sub r2, r2, ip - subs ip, ip, #16 - blt .Lcfu_3rem8lp - -.Lcfu_3cpy8lp: mov r3, r7, lspull #24 - ldmia r1!, {r4 - r7} @ Shouldnt fault - orr r3, r3, r4, lspush #8 - mov r4, r4, lspull #24 - orr r4, r4, r5, lspush #8 - mov r5, r5, lspull #24 - orr r5, r5, r6, lspush #8 - mov r6, r6, lspull #24 - orr r6, r6, r7, lspush #8 - stmia r0!, {r3 - r6} - subs ip, ip, #16 - bpl .Lcfu_3cpy8lp - -.Lcfu_3rem8lp: tst ip, #8 - movne r3, r7, lspull #24 - ldmneia r1!, {r4, r7} @ Shouldnt fault - orrne r3, r3, r4, lspush #8 - movne r4, r4, lspull #24 - orrne r4, r4, r7, lspush #8 - stmneia r0!, {r3 - r4} - tst ip, #4 - movne r3, r7, lspull #24 -USER( TUSER( ldrne) r7, [r1], #4) @ May fault - orrne r3, r3, r7, lspush #8 - strne r3, [r0], #4 - ands ip, ip, #3 - beq .Lcfu_3fupi -.Lcfu_3nowords: mov r3, r7, get_byte_3 - teq ip, #0 - beq .Lcfu_finished - cmp ip, #2 - strb r3, [r0], #1 -USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault - strgeb r3, [r0], #1 -USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault - strgtb r3, [r0], #1 - b .Lcfu_finished -ENDPROC(__copy_from_user) - - .pushsection .fixup,"ax" - .align 0 - /* - * We took an exception. r0 contains a pointer to - * the byte not copied. - */ -9001: ldr r2, [sp], #4 @ void *to - sub r2, r0, r2 @ bytes copied - ldr r1, [sp], #4 @ unsigned long count - subs r4, r1, r2 @ bytes left to copy - movne r1, r4 - blne __memzero - mov r0, r4 - ldmfd sp!, {r4 - r7, pc} - .popsection - diff --git a/arch/arm/mach-asm9260/Kconfig b/arch/arm/mach-asm9260/Kconfig index 8423be76080e..52241207a82a 100644 --- a/arch/arm/mach-asm9260/Kconfig +++ b/arch/arm/mach-asm9260/Kconfig @@ -2,5 +2,7 @@ config MACH_ASM9260 bool "Alphascale ASM9260" depends on ARCH_MULTI_V5 select CPU_ARM926T + select ASM9260_TIMER + select GENERIC_CLOCKEVENTS help Support for Alphascale ASM9260 based platform. diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 2395c68b3e32..c74a44324e5b 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -6,15 +6,6 @@ config HAVE_AT91_UTMI config HAVE_AT91_USB_CLK bool -config HAVE_AT91_DBGU0 - bool - -config HAVE_AT91_DBGU1 - bool - -config HAVE_AT91_DBGU2 - bool - config COMMON_CLK_AT91 bool select COMMON_CLK @@ -25,15 +16,6 @@ config HAVE_AT91_SMD config HAVE_AT91_H32MX bool -config SOC_AT91SAM9 - bool - select ATMEL_AIC_IRQ - select COMMON_CLK_AT91 - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - select MEMORY - select ATMEL_SDRAMC - config SOC_SAMA5 bool select ATMEL_AIC5_IRQ @@ -70,7 +52,6 @@ config SOC_SAMA5D3 bool "SAMA5D3 family" select SOC_SAMA5 select HAVE_FB_ATMEL - select HAVE_AT91_DBGU1 select HAVE_AT91_UTMI select HAVE_AT91_SMD select HAVE_AT91_USB_CLK @@ -81,10 +62,8 @@ config SOC_SAMA5D3 config SOC_SAMA5D4 bool "SAMA5D4 family" select SOC_SAMA5 - select HAVE_AT91_DBGU2 select CLKSRC_MMIO select CACHE_L2X0 - select CACHE_PL310 select HAVE_FB_ATMEL select HAVE_AT91_UTMI select HAVE_AT91_SMD @@ -101,91 +80,45 @@ config SOC_AT91RM9200 select COMMON_CLK_AT91 select CPU_ARM920T select GENERIC_CLOCKEVENTS - select HAVE_AT91_DBGU0 - select HAVE_AT91_USB_CLK - -config SOC_AT91SAM9260 - bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20" - select HAVE_AT91_DBGU0 - select SOC_AT91SAM9 - select HAVE_AT91_USB_CLK - help - Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE - or AT91SAM9G20 SoC. - -config SOC_AT91SAM9261 - bool "AT91SAM9261 or AT91SAM9G10" - select HAVE_AT91_DBGU0 - select HAVE_FB_ATMEL - select SOC_AT91SAM9 - select HAVE_AT91_USB_CLK - help - Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC. - -config SOC_AT91SAM9263 - bool "AT91SAM9263" - select HAVE_AT91_DBGU1 - select HAVE_FB_ATMEL - select SOC_AT91SAM9 select HAVE_AT91_USB_CLK -config SOC_AT91SAM9RL - bool "AT91SAM9RL" - select HAVE_AT91_DBGU0 - select HAVE_FB_ATMEL - select SOC_AT91SAM9 - select HAVE_AT91_UTMI - -config SOC_AT91SAM9G45 - bool "AT91SAM9G45 or AT91SAM9M10 families" - select HAVE_AT91_DBGU1 - select HAVE_FB_ATMEL - select SOC_AT91SAM9 - select HAVE_AT91_UTMI - select HAVE_AT91_USB_CLK - help - Select this if you are using one of Atmel's AT91SAM9G45 family SoC. - This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11. - -config SOC_AT91SAM9X5 - bool "AT91SAM9x5 family" - select HAVE_AT91_DBGU0 - select HAVE_FB_ATMEL - select SOC_AT91SAM9 - select HAVE_AT91_UTMI +config SOC_AT91SAM9 + bool "AT91SAM9" + select ATMEL_AIC_IRQ + select ATMEL_SDRAMC + select COMMON_CLK_AT91 + select CPU_ARM926T + select GENERIC_CLOCKEVENTS select HAVE_AT91_SMD select HAVE_AT91_USB_CLK - help - Select this if you are using one of Atmel's AT91SAM9x5 family SoC. - This means that your SAM9 name finishes with a '5' (except if it is - AT91SAM9G45!). - This support covers AT91SAM9G15, AT91SAM9G25, AT91SAM9X25, AT91SAM9G35 - and AT91SAM9X35. - -config SOC_AT91SAM9N12 - bool "AT91SAM9N12 family" - select HAVE_AT91_DBGU0 + select HAVE_AT91_UTMI select HAVE_FB_ATMEL - select SOC_AT91SAM9 - select HAVE_AT91_USB_CLK + select MEMORY help - Select this if you are using Atmel's AT91SAM9N12 SoC. - -# ---------------------------------------------------------- + Select this if you are using one of those Atmel SoC: + AT91SAM9260 + AT91SAM9261 + AT91SAM9263 + AT91SAM9G15 + AT91SAM9G20 + AT91SAM9G25 + AT91SAM9G35 + AT91SAM9G45 + AT91SAM9G46 + AT91SAM9M10 + AT91SAM9M11 + AT91SAM9N12 + AT91SAM9RL + AT91SAM9X25 + AT91SAM9X35 + AT91SAM9XE endif # SOC_SAM_V4_V5 -config MACH_AT91RM9200_DT - def_bool SOC_AT91RM9200 - -config MACH_AT91SAM9_DT - def_bool SOC_AT91SAM9 - -# ---------------------------------------------------------- - comment "AT91 Feature Selections" config AT91_SLOW_CLOCK bool "Suspend-to-RAM disables main oscillator" + select SRAM depends on SUSPEND help Select this if you want Suspend-to-RAM to save the most power diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 7b6424d40764..827fdbcce1c7 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -2,28 +2,14 @@ # Makefile for the linux kernel. # -obj-y := setup.o sysirq_mask.o +obj-y := setup.o obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o # CPU-specific support obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o at91rm9200_time.o -obj-$(CONFIG_SOC_AT91SAM9260) += at91sam9260.o -obj-$(CONFIG_SOC_AT91SAM9261) += at91sam9261.o -obj-$(CONFIG_SOC_AT91SAM9263) += at91sam9263.o -obj-$(CONFIG_SOC_AT91SAM9G45) += at91sam9g45.o -obj-$(CONFIG_SOC_AT91SAM9N12) += at91sam9n12.o -obj-$(CONFIG_SOC_AT91SAM9X5) += at91sam9x5.o -obj-$(CONFIG_SOC_AT91SAM9RL) += at91sam9rl.o -obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o -obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o - -# AT91SAM board with device-tree -obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o -obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o - -# SAMA5 board with device-tree -obj-$(CONFIG_SOC_SAMA5) += board-dt-sama5.o +obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o +obj-$(CONFIG_SOC_SAMA5) += sama5.o # Power Management obj-$(CONFIG_PM) += pm.o diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index b52916947535..8fcfb70f7124 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -1,35 +1,33 @@ /* - * arch/arm/mach-at91/at91rm9200.c + * Setup code for AT91RM9200 * - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * Copyright (C) 2011 Atmel, + * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> + * 2012 Joachim Eastwood <manabian@gmail.com> * + * Licensed under GPLv2 or later. */ +#include <linux/types.h> +#include <linux/init.h> #include <linux/module.h> -#include <linux/clk/at91_pmc.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/clk-provider.h> +#include <asm/setup.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/mach/irq.h> #include <asm/system_misc.h> + #include <mach/at91_st.h> -#include <mach/hardware.h> -#include "soc.h" #include "generic.h" -static void at91rm9200_idle(void) -{ - /* - * Disable the processor clock. The processor will be automatically - * re-enabled by an interrupt or by a reset. - */ - at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK); -} - static void at91rm9200_restart(enum reboot_mode reboot_mode, const char *cmd) { /* @@ -39,23 +37,31 @@ static void at91rm9200_restart(enum reboot_mode reboot_mode, const char *cmd) at91_st_write(AT91_ST_CR, AT91_ST_WDRST); } -/* -------------------------------------------------------------------- - * AT91RM9200 processor initialization - * -------------------------------------------------------------------- */ -static void __init at91rm9200_map_io(void) +static void __init at91rm9200_dt_timer_init(void) { - /* Map peripherals */ - at91_init_sram(0, AT91RM9200_SRAM_BASE, AT91RM9200_SRAM_SIZE); + of_clk_init(NULL); + at91rm9200_timer_init(); } -static void __init at91rm9200_initialize(void) +static void __init at91rm9200_dt_device_init(void) { + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + arm_pm_idle = at91rm9200_idle; arm_pm_restart = at91rm9200_restart; + at91rm9200_pm_init(); } -AT91_SOC_START(at91rm9200) - .map_io = at91rm9200_map_io, - .init = at91rm9200_initialize, -AT91_SOC_END + +static const char *at91rm9200_dt_board_compat[] __initconst = { + "atmel,at91rm9200", + NULL +}; + +DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200") + .init_time = at91rm9200_dt_timer_init, + .map_io = at91_map_io, + .init_machine = at91rm9200_dt_device_init, + .dt_compat = at91rm9200_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 51761f8927b7..b00d09555f2b 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -183,7 +183,7 @@ static struct clock_event_device clkevt = { void __iomem *at91_st_base; EXPORT_SYMBOL_GPL(at91_st_base); -static struct of_device_id at91rm9200_st_timer_ids[] = { +static const struct of_device_id at91rm9200_st_timer_ids[] = { { .compatible = "atmel,at91rm9200-st" }, { /* sentinel */ } }; diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c new file mode 100644 index 000000000000..56e3ba73ec40 --- /dev/null +++ b/arch/arm/mach-at91/at91sam9.c @@ -0,0 +1,87 @@ +/* + * Setup code for AT91SAM9 + * + * Copyright (C) 2011 Atmel, + * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/clk-provider.h> + +#include <asm/system_misc.h> +#include <asm/setup.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include "generic.h" + +static void __init at91sam9_dt_device_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + + arm_pm_idle = at91sam9_idle; + at91sam9260_pm_init(); +} + +static const char *at91_dt_board_compat[] __initconst = { + "atmel,at91sam9", + NULL +}; + +DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9") + /* Maintainer: Atmel */ + .map_io = at91_map_io, + .init_machine = at91sam9_dt_device_init, + .dt_compat = at91_dt_board_compat, +MACHINE_END + +static void __init at91sam9g45_dt_device_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + + arm_pm_idle = at91sam9_idle; + at91sam9g45_pm_init(); +} + +static const char *at91sam9g45_board_compat[] __initconst = { + "atmel,at91sam9g45", + NULL +}; + +DT_MACHINE_START(at91sam9g45_dt, "Atmel AT91SAM9G45") + /* Maintainer: Atmel */ + .map_io = at91_map_io, + .init_machine = at91sam9g45_dt_device_init, + .dt_compat = at91sam9g45_board_compat, +MACHINE_END + +static void __init at91sam9x5_dt_device_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + + arm_pm_idle = at91sam9_idle; + at91sam9x5_pm_init(); +} + +static const char *at91sam9x5_board_compat[] __initconst = { + "atmel,at91sam9x5", + "atmel,at91sam9n12", + NULL +}; + +DT_MACHINE_START(at91sam9x5_dt, "Atmel AT91SAM9") + /* Maintainer: Atmel */ + .map_io = at91_map_io, + .init_machine = at91sam9x5_dt_device_init, + .dt_compat = at91sam9x5_board_compat, +MACHINE_END diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c deleted file mode 100644 index 78137c24d90b..000000000000 --- a/arch/arm/mach-at91/at91sam9260.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * arch/arm/mach-at91/at91sam9260.c - * - * Copyright (C) 2006 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#include <asm/system_misc.h> -#include <mach/cpu.h> -#include <mach/at91_dbgu.h> -#include <mach/hardware.h> - -#include "soc.h" -#include "generic.h" - -/* -------------------------------------------------------------------- - * AT91SAM9260 processor initialization - * -------------------------------------------------------------------- */ - -static void __init at91sam9xe_map_io(void) -{ - unsigned long sram_size; - - switch (at91_soc_initdata.cidr & AT91_CIDR_SRAMSIZ) { - case AT91_CIDR_SRAMSIZ_32K: - sram_size = 2 * SZ_16K; - break; - case AT91_CIDR_SRAMSIZ_16K: - default: - sram_size = SZ_16K; - } - - at91_init_sram(0, AT91SAM9XE_SRAM_BASE, sram_size); -} - -static void __init at91sam9260_map_io(void) -{ - if (cpu_is_at91sam9xe()) - at91sam9xe_map_io(); - else if (cpu_is_at91sam9g20()) - at91_init_sram(0, AT91SAM9G20_SRAM_BASE, AT91SAM9G20_SRAM_SIZE); - else - at91_init_sram(0, AT91SAM9260_SRAM_BASE, AT91SAM9260_SRAM_SIZE); -} - -static void __init at91sam9260_initialize(void) -{ - arm_pm_idle = at91sam9_idle; - - at91_sysirq_mask_rtt(AT91SAM9260_BASE_RTT); -} - -AT91_SOC_START(at91sam9260) - .map_io = at91sam9260_map_io, - .init = at91sam9260_initialize, -AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c deleted file mode 100644 index d29953ecb0c4..000000000000 --- a/arch/arm/mach-at91/at91sam9261.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * arch/arm/mach-at91/at91sam9261.c - * - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#include <asm/system_misc.h> -#include <mach/cpu.h> -#include <mach/hardware.h> - -#include "soc.h" -#include "generic.h" - -/* -------------------------------------------------------------------- - * AT91SAM9261 processor initialization - * -------------------------------------------------------------------- */ - -static void __init at91sam9261_map_io(void) -{ - if (cpu_is_at91sam9g10()) - at91_init_sram(0, AT91SAM9G10_SRAM_BASE, AT91SAM9G10_SRAM_SIZE); - else - at91_init_sram(0, AT91SAM9261_SRAM_BASE, AT91SAM9261_SRAM_SIZE); -} - -static void __init at91sam9261_initialize(void) -{ - arm_pm_idle = at91sam9_idle; - - at91_sysirq_mask_rtt(AT91SAM9261_BASE_RTT); -} - -AT91_SOC_START(at91sam9261) - .map_io = at91sam9261_map_io, - .init = at91sam9261_initialize, -AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c deleted file mode 100644 index e7ad14864083..000000000000 --- a/arch/arm/mach-at91/at91sam9263.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * arch/arm/mach-at91/at91sam9263.c - * - * Copyright (C) 2007 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#include <asm/system_misc.h> -#include <mach/hardware.h> - -#include "soc.h" -#include "generic.h" - -/* -------------------------------------------------------------------- - * AT91SAM9263 processor initialization - * -------------------------------------------------------------------- */ - -static void __init at91sam9263_map_io(void) -{ - at91_init_sram(0, AT91SAM9263_SRAM0_BASE, AT91SAM9263_SRAM0_SIZE); - at91_init_sram(1, AT91SAM9263_SRAM1_BASE, AT91SAM9263_SRAM1_SIZE); -} - -static void __init at91sam9263_initialize(void) -{ - arm_pm_idle = at91sam9_idle; - - at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT0); - at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT1); -} - -AT91_SOC_START(at91sam9263) - .map_io = at91sam9263_map_io, - .init = at91sam9263_initialize, -AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c deleted file mode 100644 index b6117bea9a6f..000000000000 --- a/arch/arm/mach-at91/at91sam9g45.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * Chip-specific setup code for the AT91SAM9G45 family - * - * Copyright (C) 2009 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#include <asm/system_misc.h> -#include <asm/irq.h> -#include <mach/hardware.h> - -#include "soc.h" -#include "generic.h" - -/* -------------------------------------------------------------------- - * AT91SAM9G45 processor initialization - * -------------------------------------------------------------------- */ - -static void __init at91sam9g45_map_io(void) -{ - at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE); -} - -static void __init at91sam9g45_initialize(void) -{ - arm_pm_idle = at91sam9_idle; - - at91_sysirq_mask_rtc(AT91SAM9G45_BASE_RTC); - at91_sysirq_mask_rtt(AT91SAM9G45_BASE_RTT); -} - -AT91_SOC_START(at91sam9g45) - .map_io = at91sam9g45_map_io, - .init = at91sam9g45_initialize, -AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c deleted file mode 100644 index dee569b1987e..000000000000 --- a/arch/arm/mach-at91/at91sam9n12.c +++ /dev/null @@ -1,32 +0,0 @@ -/* - * SoC specific setup code for the AT91SAM9N12 - * - * Copyright (C) 2012 Atmel Corporation. - * - * Licensed under GPLv2 or later. - */ - -#include <asm/system_misc.h> -#include <mach/hardware.h> - -#include "soc.h" -#include "generic.h" - -/* -------------------------------------------------------------------- - * AT91SAM9N12 processor initialization - * -------------------------------------------------------------------- */ - -static void __init at91sam9n12_map_io(void) -{ - at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE); -} - -static void __init at91sam9n12_initialize(void) -{ - at91_sysirq_mask_rtc(AT91SAM9N12_BASE_RTC); -} - -AT91_SOC_START(at91sam9n12) - .map_io = at91sam9n12_map_io, - .init = at91sam9n12_initialize, -AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c deleted file mode 100644 index f25b9aec9c50..000000000000 --- a/arch/arm/mach-at91/at91sam9rl.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * arch/arm/mach-at91/at91sam9rl.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2007 Atmel Corporation - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#include <asm/system_misc.h> -#include <asm/irq.h> -#include <mach/cpu.h> -#include <mach/at91_dbgu.h> -#include <mach/hardware.h> - -#include "soc.h" -#include "generic.h" - -/* -------------------------------------------------------------------- - * AT91SAM9RL processor initialization - * -------------------------------------------------------------------- */ - -static void __init at91sam9rl_map_io(void) -{ - unsigned long sram_size; - - switch (at91_soc_initdata.cidr & AT91_CIDR_SRAMSIZ) { - case AT91_CIDR_SRAMSIZ_32K: - sram_size = 2 * SZ_16K; - break; - case AT91_CIDR_SRAMSIZ_16K: - default: - sram_size = SZ_16K; - } - - /* Map SRAM */ - at91_init_sram(0, AT91SAM9RL_SRAM_BASE, sram_size); -} - -static void __init at91sam9rl_initialize(void) -{ - arm_pm_idle = at91sam9_idle; - - at91_sysirq_mask_rtc(AT91SAM9RL_BASE_RTC); - at91_sysirq_mask_rtt(AT91SAM9RL_BASE_RTT); -} - -AT91_SOC_START(at91sam9rl) - .map_io = at91sam9rl_map_io, - .init = at91sam9rl_initialize, -AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c deleted file mode 100644 index f0d5a69a7237..000000000000 --- a/arch/arm/mach-at91/at91sam9x5.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Chip-specific setup code for the AT91SAM9x5 family - * - * Copyright (C) 2010-2012 Atmel Corporation. - * - * Licensed under GPLv2 or later. - */ - -#include <asm/system_misc.h> -#include <mach/hardware.h> - -#include "soc.h" -#include "generic.h" - -/* -------------------------------------------------------------------- - * AT91SAM9x5 processor initialization - * -------------------------------------------------------------------- */ - -static void __init at91sam9x5_map_io(void) -{ - at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE); -} - -static void __init at91sam9x5_initialize(void) -{ - at91_sysirq_mask_rtc(AT91SAM9X5_BASE_RTC); -} - -/* -------------------------------------------------------------------- - * Interrupt initialization - * -------------------------------------------------------------------- */ - -AT91_SOC_START(at91sam9x5) - .map_io = at91sam9x5_map_io, - .init = at91sam9x5_initialize, -AT91_SOC_END diff --git a/arch/arm/mach-at91/board-dt-rm9200.c b/arch/arm/mach-at91/board-dt-rm9200.c deleted file mode 100644 index 76dfe8f9af50..000000000000 --- a/arch/arm/mach-at91/board-dt-rm9200.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Setup code for AT91RM9200 Evaluation Kits with Device Tree support - * - * Copyright (C) 2011 Atmel, - * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> - * 2012 Joachim Eastwood <manabian@gmail.com> - * - * Licensed under GPLv2 or later. - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/gpio.h> -#include <linux/of.h> -#include <linux/of_irq.h> -#include <linux/clk-provider.h> - -#include <asm/setup.h> -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include "generic.h" - -static void __init at91rm9200_dt_timer_init(void) -{ - of_clk_init(NULL); - at91rm9200_timer_init(); -} - -static const char *at91rm9200_dt_board_compat[] __initdata = { - "atmel,at91rm9200", - NULL -}; - -DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)") - .init_time = at91rm9200_dt_timer_init, - .map_io = at91_map_io, - .init_early = at91rm9200_dt_initialize, - .dt_compat = at91rm9200_dt_board_compat, -MACHINE_END diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c deleted file mode 100644 index f99246aa9b38..000000000000 --- a/arch/arm/mach-at91/board-dt-sam9.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Setup code for AT91SAM Evaluation Kits with Device Tree support - * - * Copyright (C) 2011 Atmel, - * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * Licensed under GPLv2 or later. - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/gpio.h> -#include <linux/of.h> -#include <linux/of_irq.h> -#include <linux/clk-provider.h> - -#include <asm/setup.h> -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include "generic.h" - -static const char *at91_dt_board_compat[] __initdata = { - "atmel,at91sam9", - NULL -}; - -DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)") - /* Maintainer: Atmel */ - .map_io = at91_map_io, - .init_early = at91_dt_initialize, - .dt_compat = at91_dt_board_compat, -MACHINE_END diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index d53324210adf..583369ffc284 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -17,24 +17,28 @@ /* Map io */ extern void __init at91_map_io(void); extern void __init at91_alt_map_io(void); -extern void __init at91_init_sram(int bank, unsigned long base, - unsigned int length); - - /* Processors */ -extern void __init at91rm9200_set_type(int type); -extern void __init at91rm9200_dt_initialize(void); -extern void __init at91_dt_initialize(void); - - /* Interrupts */ -extern void __init at91_sysirq_mask_rtc(u32 rtc_base); -extern void __init at91_sysirq_mask_rtt(u32 rtt_base); /* Timer */ extern void at91rm9200_timer_init(void); /* idle */ +extern void at91rm9200_idle(void); extern void at91sam9_idle(void); /* Matrix */ extern void at91_ioremap_matrix(u32 base_addr); + + +#ifdef CONFIG_PM +extern void __init at91rm9200_pm_init(void); +extern void __init at91sam9260_pm_init(void); +extern void __init at91sam9g45_pm_init(void); +extern void __init at91sam9x5_pm_init(void); +#else +static inline void __init at91rm9200_pm_init(void) { } +static inline void __init at91sam9260_pm_init(void) { } +static inline void __init at91sam9g45_pm_init(void) { } +static inline void __init at91sam9x5_pm_init(void) { } +#endif + #endif /* _AT91_GENERIC_H */ diff --git a/arch/arm/mach-at91/include/mach/at91_pio.h b/arch/arm/mach-at91/include/mach/at91_pio.h deleted file mode 100644 index 7b7366253ceb..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_pio.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_pio.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Parallel I/O Controller (PIO) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_PIO_H -#define AT91_PIO_H - -#define PIO_PER 0x00 /* Enable Register */ -#define PIO_PDR 0x04 /* Disable Register */ -#define PIO_PSR 0x08 /* Status Register */ -#define PIO_OER 0x10 /* Output Enable Register */ -#define PIO_ODR 0x14 /* Output Disable Register */ -#define PIO_OSR 0x18 /* Output Status Register */ -#define PIO_IFER 0x20 /* Glitch Input Filter Enable */ -#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */ -#define PIO_IFSR 0x28 /* Glitch Input Filter Status */ -#define PIO_SODR 0x30 /* Set Output Data Register */ -#define PIO_CODR 0x34 /* Clear Output Data Register */ -#define PIO_ODSR 0x38 /* Output Data Status Register */ -#define PIO_PDSR 0x3c /* Pin Data Status Register */ -#define PIO_IER 0x40 /* Interrupt Enable Register */ -#define PIO_IDR 0x44 /* Interrupt Disable Register */ -#define PIO_IMR 0x48 /* Interrupt Mask Register */ -#define PIO_ISR 0x4c /* Interrupt Status Register */ -#define PIO_MDER 0x50 /* Multi-driver Enable Register */ -#define PIO_MDDR 0x54 /* Multi-driver Disable Register */ -#define PIO_MDSR 0x58 /* Multi-driver Status Register */ -#define PIO_PUDR 0x60 /* Pull-up Disable Register */ -#define PIO_PUER 0x64 /* Pull-up Enable Register */ -#define PIO_PUSR 0x68 /* Pull-up Status Register */ -#define PIO_ASR 0x70 /* Peripheral A Select Register */ -#define PIO_ABCDSR1 0x70 /* Peripheral ABCD Select Register 1 [some sam9 only] */ -#define PIO_BSR 0x74 /* Peripheral B Select Register */ -#define PIO_ABCDSR2 0x74 /* Peripheral ABCD Select Register 2 [some sam9 only] */ -#define PIO_ABSR 0x78 /* AB Status Register */ -#define PIO_IFSCDR 0x80 /* Input Filter Slow Clock Disable Register */ -#define PIO_IFSCER 0x84 /* Input Filter Slow Clock Enable Register */ -#define PIO_IFSCSR 0x88 /* Input Filter Slow Clock Status Register */ -#define PIO_SCDR 0x8c /* Slow Clock Divider Debouncing Register */ -#define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */ -#define PIO_PPDDR 0x90 /* Pad Pull-down Disable Register */ -#define PIO_PPDER 0x94 /* Pad Pull-down Enable Register */ -#define PIO_PPDSR 0x98 /* Pad Pull-down Status Register */ -#define PIO_OWER 0xa0 /* Output Write Enable Register */ -#define PIO_OWDR 0xa4 /* Output Write Disable Register */ -#define PIO_OWSR 0xa8 /* Output Write Status Register */ -#define PIO_AIMER 0xb0 /* Additional Interrupt Modes Enable Register */ -#define PIO_AIMDR 0xb4 /* Additional Interrupt Modes Disable Register */ -#define PIO_AIMMR 0xb8 /* Additional Interrupt Modes Mask Register */ -#define PIO_ESR 0xc0 /* Edge Select Register */ -#define PIO_LSR 0xc4 /* Level Select Register */ -#define PIO_ELSR 0xc8 /* Edge/Level Status Register */ -#define PIO_FELLSR 0xd0 /* Falling Edge/Low Level Select Register */ -#define PIO_REHLSR 0xd4 /* Rising Edge/ High Level Select Register */ -#define PIO_FRLHSR 0xd8 /* Fall/Rise - Low/High Status Register */ -#define PIO_SCHMITT 0x100 /* Schmitt Trigger Register */ - -#define ABCDSR_PERIPH_A 0x0 -#define ABCDSR_PERIPH_B 0x1 -#define ABCDSR_PERIPH_C 0x2 -#define ABCDSR_PERIPH_D 0x3 - -#define SAMA5D3_PIO_DRIVER1 0x118 /*PIO Driver 1 register offset*/ -#define SAMA5D3_PIO_DRIVER2 0x11C /*PIO Driver 2 register offset*/ - -#define AT91SAM9X5_PIO_DRIVER1 0x114 /*PIO Driver 1 register offset*/ -#define AT91SAM9X5_PIO_DRIVER2 0x118 /*PIO Driver 2 register offset*/ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91_rtt.h b/arch/arm/mach-at91/include/mach/at91_rtt.h deleted file mode 100644 index 7ec75de8bbb6..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_rtt.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_rtt.h - * - * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 Atmel Corporation. - * - * Real-time Timer (RTT) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_RTT_H -#define AT91_RTT_H - -#define AT91_RTT_MR 0x00 /* Real-time Mode Register */ -#define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */ -#define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */ -#define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */ -#define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */ - -#define AT91_RTT_AR 0x04 /* Real-time Alarm Register */ -#define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */ - -#define AT91_RTT_VR 0x08 /* Real-time Value Register */ -#define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */ - -#define AT91_RTT_SR 0x0c /* Real-time Status Register */ -#define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */ -#define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 61914fb35f5d..ce7c80a44983 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -152,69 +152,45 @@ static inline int at91_soc_is_detected(void) #define cpu_is_at91rm9200_pqfp() (0) #endif -#ifdef CONFIG_SOC_AT91SAM9260 +#ifdef CONFIG_SOC_AT91SAM9 #define cpu_is_at91sam9xe() (at91_soc_initdata.subtype == AT91_SOC_SAM9XE) #define cpu_is_at91sam9260() (at91_soc_initdata.type == AT91_SOC_SAM9260) #define cpu_is_at91sam9g20() (at91_soc_initdata.type == AT91_SOC_SAM9G20) -#else -#define cpu_is_at91sam9xe() (0) -#define cpu_is_at91sam9260() (0) -#define cpu_is_at91sam9g20() (0) -#endif - -#ifdef CONFIG_SOC_AT91SAM9261 #define cpu_is_at91sam9261() (at91_soc_initdata.type == AT91_SOC_SAM9261) #define cpu_is_at91sam9g10() (at91_soc_initdata.type == AT91_SOC_SAM9G10) -#else -#define cpu_is_at91sam9261() (0) -#define cpu_is_at91sam9g10() (0) -#endif - -#ifdef CONFIG_SOC_AT91SAM9263 #define cpu_is_at91sam9263() (at91_soc_initdata.type == AT91_SOC_SAM9263) -#else -#define cpu_is_at91sam9263() (0) -#endif - -#ifdef CONFIG_SOC_AT91SAM9RL #define cpu_is_at91sam9rl() (at91_soc_initdata.type == AT91_SOC_SAM9RL) -#else -#define cpu_is_at91sam9rl() (0) -#endif - -#ifdef CONFIG_SOC_AT91SAM9G45 #define cpu_is_at91sam9g45() (at91_soc_initdata.type == AT91_SOC_SAM9G45) #define cpu_is_at91sam9g45es() (at91_soc_initdata.subtype == AT91_SOC_SAM9G45ES) #define cpu_is_at91sam9m10() (at91_soc_initdata.subtype == AT91_SOC_SAM9M10) #define cpu_is_at91sam9g46() (at91_soc_initdata.subtype == AT91_SOC_SAM9G46) #define cpu_is_at91sam9m11() (at91_soc_initdata.subtype == AT91_SOC_SAM9M11) -#else -#define cpu_is_at91sam9g45() (0) -#define cpu_is_at91sam9g45es() (0) -#define cpu_is_at91sam9m10() (0) -#define cpu_is_at91sam9g46() (0) -#define cpu_is_at91sam9m11() (0) -#endif - -#ifdef CONFIG_SOC_AT91SAM9X5 #define cpu_is_at91sam9x5() (at91_soc_initdata.type == AT91_SOC_SAM9X5) #define cpu_is_at91sam9g15() (at91_soc_initdata.subtype == AT91_SOC_SAM9G15) #define cpu_is_at91sam9g35() (at91_soc_initdata.subtype == AT91_SOC_SAM9G35) #define cpu_is_at91sam9x35() (at91_soc_initdata.subtype == AT91_SOC_SAM9X35) #define cpu_is_at91sam9g25() (at91_soc_initdata.subtype == AT91_SOC_SAM9G25) #define cpu_is_at91sam9x25() (at91_soc_initdata.subtype == AT91_SOC_SAM9X25) +#define cpu_is_at91sam9n12() (at91_soc_initdata.type == AT91_SOC_SAM9N12) #else +#define cpu_is_at91sam9xe() (0) +#define cpu_is_at91sam9260() (0) +#define cpu_is_at91sam9g20() (0) +#define cpu_is_at91sam9261() (0) +#define cpu_is_at91sam9g10() (0) +#define cpu_is_at91sam9263() (0) +#define cpu_is_at91sam9rl() (0) +#define cpu_is_at91sam9g45() (0) +#define cpu_is_at91sam9g45es() (0) +#define cpu_is_at91sam9m10() (0) +#define cpu_is_at91sam9g46() (0) +#define cpu_is_at91sam9m11() (0) #define cpu_is_at91sam9x5() (0) #define cpu_is_at91sam9g15() (0) #define cpu_is_at91sam9g35() (0) #define cpu_is_at91sam9x35() (0) #define cpu_is_at91sam9g25() (0) #define cpu_is_at91sam9x25() (0) -#endif - -#ifdef CONFIG_SOC_AT91SAM9N12 -#define cpu_is_at91sam9n12() (at91_soc_initdata.type == AT91_SOC_SAM9N12) -#else #define cpu_is_at91sam9n12() (0) #endif diff --git a/arch/arm/mach-at91/include/mach/memory.h b/arch/arm/mach-at91/include/mach/memory.h deleted file mode 100644 index 401c207f2f39..000000000000 --- a/arch/arm/mach-at91/include/mach/memory.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/memory.h - * - * Copyright (C) 2004 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include <mach/hardware.h> - -#endif diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h deleted file mode 100644 index ef79a9aafc08..000000000000 --- a/arch/arm/mach-at91/include/mach/system_rev.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Under GPLv2 only - */ - -#ifndef __ARCH_SYSTEM_REV_H__ -#define __ARCH_SYSTEM_REV_H__ - -#include <asm/system_info.h> - -/* - * board revision encoding - * mach specific - * the 16-31 bit are reserved for at91 generic information - * - * bit 31: - * 0 => nand 8 bit - * 1 => nand 16 bit - */ -#define BOARD_HAVE_NAND_16BIT (1 << 31) -static inline int board_have_nand_16bit(void) -{ - return (system_rev & BOARD_HAVE_NAND_16BIT) ? 1 : 0; -} - -#endif /* __ARCH_SYSTEM_REV_H__ */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 9b15169a1c62..aa4116e9452f 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -14,9 +14,13 @@ #include <linux/suspend.h> #include <linux/sched.h> #include <linux/proc_fs.h> +#include <linux/genalloc.h> #include <linux/interrupt.h> #include <linux/sysfs.h> #include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/clk/at91_pmc.h> @@ -32,7 +36,13 @@ #include "generic.h" #include "pm.h" +static struct { + unsigned long uhp_udp_mask; + int memctrl; +} at91_pm_data; + static void (*at91_pm_standby)(void); +void __iomem *at91_ramc_base[2]; static int at91_pm_valid_state(suspend_state_t state) { @@ -71,17 +81,9 @@ static int at91_pm_verify_clocks(void) scsr = at91_pmc_read(AT91_PMC_SCSR); /* USB must not be using PLLB */ - if (cpu_is_at91rm9200()) { - if ((scsr & (AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP)) != 0) { - pr_err("AT91: PM - Suspend-to-RAM with USB still active\n"); - return 0; - } - } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() - || cpu_is_at91sam9g20() || cpu_is_at91sam9g10()) { - if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) { - pr_err("AT91: PM - Suspend-to-RAM with USB still active\n"); - return 0; - } + if ((scsr & at91_pm_data.uhp_udp_mask) != 0) { + pr_err("AT91: PM - Suspend-to-RAM with USB still active\n"); + return 0; } /* PCK0..PCK3 must be disabled, or configured to use clk32k */ @@ -149,18 +151,13 @@ static int at91_pm_enter(suspend_state_t state) * turning off the main oscillator; reverse on wakeup. */ if (slow_clock) { - int memctrl = AT91_MEMCTRL_SDRAMC; - - if (cpu_is_at91rm9200()) - memctrl = AT91_MEMCTRL_MC; - else if (cpu_is_at91sam9g45()) - memctrl = AT91_MEMCTRL_DDRSDR; #ifdef CONFIG_AT91_SLOW_CLOCK /* copy slow_clock handler to SRAM, and call it */ memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz); #endif slow_clock(at91_pmc_base, at91_ramc_base[0], - at91_ramc_base[1], memctrl); + at91_ramc_base[1], + at91_pm_data.memctrl); break; } else { pr_info("AT91: PM - no slow clock mode enabled ...\n"); @@ -229,23 +226,132 @@ void at91_pm_set_standby(void (*at91_standby)(void)) } } -static int __init at91_pm_init(void) +static const struct of_device_id ramc_ids[] __initconst = { + { .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby }, + { .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby }, + { .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby }, + { .compatible = "atmel,sama5d3-ddramc", .data = at91_ddr_standby }, + { /*sentinel*/ } +}; + +static __init void at91_dt_ramc(void) +{ + struct device_node *np; + const struct of_device_id *of_id; + int idx = 0; + const void *standby = NULL; + + for_each_matching_node_and_match(np, ramc_ids, &of_id) { + at91_ramc_base[idx] = of_iomap(np, 0); + if (!at91_ramc_base[idx]) + panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx); + + if (!standby) + standby = of_id->data; + + idx++; + } + + if (!idx) + panic(pr_fmt("unable to find compatible ram controller node in dtb\n")); + + if (!standby) { + pr_warn("ramc no standby function available\n"); + return; + } + + at91_pm_set_standby(standby); +} + +#ifdef CONFIG_AT91_SLOW_CLOCK +static void __init at91_pm_sram_init(void) +{ + struct gen_pool *sram_pool; + phys_addr_t sram_pbase; + unsigned long sram_base; + struct device_node *node; + struct platform_device *pdev = NULL; + + for_each_compatible_node(node, NULL, "mmio-sram") { + pdev = of_find_device_by_node(node); + if (pdev) { + of_node_put(node); + break; + } + } + + if (!pdev) { + pr_warn("%s: failed to find sram device!\n", __func__); + return; + } + + sram_pool = dev_get_gen_pool(&pdev->dev); + if (!sram_pool) { + pr_warn("%s: sram pool unavailable!\n", __func__); + return; + } + + sram_base = gen_pool_alloc(sram_pool, at91_slow_clock_sz); + if (!sram_base) { + pr_warn("%s: unable to alloc ocram!\n", __func__); + return; + } + + sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base); + slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false); +} +#endif + + +static void __init at91_pm_init(void) { #ifdef CONFIG_AT91_SLOW_CLOCK - slow_clock = (void *) (AT91_IO_VIRT_BASE - at91_slow_clock_sz); + at91_pm_sram_init(); #endif pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : "")); - /* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */ - if (cpu_is_at91rm9200()) - at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0); - if (at91_cpuidle_device.dev.platform_data) platform_device_register(&at91_cpuidle_device); suspend_set_ops(&at91_pm_ops); +} - return 0; +void __init at91rm9200_pm_init(void) +{ + at91_dt_ramc(); + + /* + * AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. + */ + at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0); + + at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP; + at91_pm_data.memctrl = AT91_MEMCTRL_MC; + + at91_pm_init(); +} + +void __init at91sam9260_pm_init(void) +{ + at91_dt_ramc(); + at91_pm_data.memctrl = AT91_MEMCTRL_SDRAMC; + at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP; + return at91_pm_init(); +} + +void __init at91sam9g45_pm_init(void) +{ + at91_dt_ramc(); + at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP; + at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR; + return at91_pm_init(); +} + +void __init at91sam9x5_pm_init(void) +{ + at91_dt_ramc(); + at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP; + at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR; + return at91_pm_init(); } -arch_initcall(at91_pm_init); diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index d2c89963af2d..86c0aa819d25 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -44,7 +44,7 @@ static inline void at91rm9200_standby(void) " mcr p15, 0, %0, c7, c0, 4\n\t" " str %5, [%1, %2]" : - : "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR), + : "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR), "r" (1), "r" (AT91RM9200_SDRAMC_SRR), "r" (lpr)); } diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index 20018779bae7..931f0e302c03 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -17,15 +17,6 @@ #include <mach/hardware.h> #include <mach/at91_ramc.h> - -#ifdef CONFIG_SOC_AT91SAM9263 -/* - * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use; - * handle those cases both here and in the Suspend-To-RAM support. - */ -#warning Assuming EB1 SDRAM controller is *NOT* used -#endif - /* * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master * clock during suspend by adjusting its prescalar and divisor. @@ -34,11 +25,6 @@ */ #undef SLOWDOWN_MASTER_CLOCK -#define MCKRDY_TIMEOUT 1000 -#define MOSCRDY_TIMEOUT 1000 -#define PLLALOCK_TIMEOUT 1000 -#define PLLBLOCK_TIMEOUT 1000 - pmc .req r0 sdramc .req r1 ramc1 .req r2 @@ -50,60 +36,42 @@ tmp2 .req r5 * Wait until master clock is ready (after switching master clock source) */ .macro wait_mckrdy - mov tmp2, #MCKRDY_TIMEOUT -1: sub tmp2, tmp2, #1 - cmp tmp2, #0 - beq 2f - ldr tmp1, [pmc, #AT91_PMC_SR] +1: ldr tmp1, [pmc, #AT91_PMC_SR] tst tmp1, #AT91_PMC_MCKRDY beq 1b -2: .endm /* * Wait until master oscillator has stabilized. */ .macro wait_moscrdy - mov tmp2, #MOSCRDY_TIMEOUT -1: sub tmp2, tmp2, #1 - cmp tmp2, #0 - beq 2f - ldr tmp1, [pmc, #AT91_PMC_SR] +1: ldr tmp1, [pmc, #AT91_PMC_SR] tst tmp1, #AT91_PMC_MOSCS beq 1b -2: .endm /* * Wait until PLLA has locked. */ .macro wait_pllalock - mov tmp2, #PLLALOCK_TIMEOUT -1: sub tmp2, tmp2, #1 - cmp tmp2, #0 - beq 2f - ldr tmp1, [pmc, #AT91_PMC_SR] +1: ldr tmp1, [pmc, #AT91_PMC_SR] tst tmp1, #AT91_PMC_LOCKA beq 1b -2: .endm /* * Wait until PLLB has locked. */ .macro wait_pllblock - mov tmp2, #PLLBLOCK_TIMEOUT -1: sub tmp2, tmp2, #1 - cmp tmp2, #0 - beq 2f - ldr tmp1, [pmc, #AT91_PMC_SR] +1: ldr tmp1, [pmc, #AT91_PMC_SR] tst tmp1, #AT91_PMC_LOCKB beq 1b -2: .endm .text + .arm + /* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc, * void __iomem *ramc1, int memctrl) */ @@ -143,6 +111,16 @@ ddr_sr_enable: cmp memctrl, #AT91_MEMCTRL_DDRSDR bne sdr_sr_enable + /* LPDDR1 --> force DDR2 mode during self-refresh */ + ldr tmp1, [sdramc, #AT91_DDRSDRC_MDR] + str tmp1, .saved_sam9_mdr + bic tmp1, tmp1, #~AT91_DDRSDRC_MD + cmp tmp1, #AT91_DDRSDRC_MD_LOW_POWER_DDR + ldreq tmp1, [sdramc, #AT91_DDRSDRC_MDR] + biceq tmp1, tmp1, #AT91_DDRSDRC_MD + orreq tmp1, tmp1, #AT91_DDRSDRC_MD_DDR2 + streq tmp1, [sdramc, #AT91_DDRSDRC_MDR] + /* prepare for DDRAM self-refresh mode */ ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR] str tmp1, .saved_sam9_lpr @@ -151,14 +129,26 @@ ddr_sr_enable: /* figure out if we use the second ram controller */ cmp ramc1, #0 - ldrne tmp2, [ramc1, #AT91_DDRSDRC_LPR] - strne tmp2, .saved_sam9_lpr1 - bicne tmp2, #AT91_DDRSDRC_LPCB - orrne tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH + beq ddr_no_2nd_ctrl + + ldr tmp2, [ramc1, #AT91_DDRSDRC_MDR] + str tmp2, .saved_sam9_mdr1 + bic tmp2, tmp2, #~AT91_DDRSDRC_MD + cmp tmp2, #AT91_DDRSDRC_MD_LOW_POWER_DDR + ldreq tmp2, [ramc1, #AT91_DDRSDRC_MDR] + biceq tmp2, tmp2, #AT91_DDRSDRC_MD + orreq tmp2, tmp2, #AT91_DDRSDRC_MD_DDR2 + streq tmp2, [ramc1, #AT91_DDRSDRC_MDR] + + ldr tmp2, [ramc1, #AT91_DDRSDRC_LPR] + str tmp2, .saved_sam9_lpr1 + bic tmp2, #AT91_DDRSDRC_LPCB + orr tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH /* Enable DDRAM self-refresh mode */ + str tmp2, [ramc1, #AT91_DDRSDRC_LPR] +ddr_no_2nd_ctrl: str tmp1, [sdramc, #AT91_DDRSDRC_LPR] - strne tmp2, [ramc1, #AT91_DDRSDRC_LPR] b sdr_sr_done @@ -217,6 +207,7 @@ sdr_sr_done: /* Turn off the main oscillator */ ldr tmp1, [pmc, #AT91_CKGR_MOR] bic tmp1, tmp1, #AT91_PMC_MOSCEN + orr tmp1, tmp1, #AT91_PMC_KEY str tmp1, [pmc, #AT91_CKGR_MOR] /* Wait for interrupt */ @@ -225,6 +216,7 @@ sdr_sr_done: /* Turn on the main oscillator */ ldr tmp1, [pmc, #AT91_CKGR_MOR] orr tmp1, tmp1, #AT91_PMC_MOSCEN + orr tmp1, tmp1, #AT91_PMC_KEY str tmp1, [pmc, #AT91_CKGR_MOR] wait_moscrdy @@ -289,12 +281,17 @@ sdr_sr_done: */ cmp memctrl, #AT91_MEMCTRL_DDRSDR bne sdr_en_restore + /* Restore MDR in case of LPDDR1 */ + ldr tmp1, .saved_sam9_mdr + str tmp1, [sdramc, #AT91_DDRSDRC_MDR] /* Restore LPR on AT91 with DDRAM */ ldr tmp1, .saved_sam9_lpr str tmp1, [sdramc, #AT91_DDRSDRC_LPR] /* if we use the second ram controller */ cmp ramc1, #0 + ldrne tmp2, .saved_sam9_mdr1 + strne tmp2, [ramc1, #AT91_DDRSDRC_MDR] ldrne tmp2, .saved_sam9_lpr1 strne tmp2, [ramc1, #AT91_DDRSDRC_LPR] @@ -328,5 +325,11 @@ ram_restored: .saved_sam9_lpr1: .word 0 +.saved_sam9_mdr: + .word 0 + +.saved_sam9_mdr1: + .word 0 + ENTRY(at91_slow_clock_sz) .word .-at91_slow_clock diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/sama5.c index 97f7367d32b8..03dcb441f3d2 100644 --- a/arch/arm/mach-at91/board-dt-sama5.c +++ b/arch/arm/mach-at91/sama5.c @@ -1,5 +1,5 @@ /* - * Setup code for SAMA5 Evaluation Kits with Device Tree support + * Setup code for SAMA5 * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> @@ -19,6 +19,8 @@ #include <linux/clk-provider.h> #include <linux/phy.h> +#include <mach/hardware.h> + #include <asm/setup.h> #include <asm/irq.h> #include <asm/mach/arch.h> @@ -47,6 +49,7 @@ static void __init sama5_dt_device_init(void) } of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + at91sam9x5_pm_init(); } static const char *sama5_dt_board_compat[] __initconst = { @@ -54,23 +57,54 @@ static const char *sama5_dt_board_compat[] __initconst = { NULL }; -DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)") +DT_MACHINE_START(sama5_dt, "Atmel SAMA5") /* Maintainer: Atmel */ .map_io = at91_map_io, - .init_early = at91_dt_initialize, .init_machine = sama5_dt_device_init, .dt_compat = sama5_dt_board_compat, MACHINE_END +static struct map_desc at91_io_desc[] __initdata = { + { + .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC), + .pfn = __phys_to_pfn(SAMA5D4_BASE_MPDDRC), + .length = SZ_512, + .type = MT_DEVICE, + }, + { + .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC), + .pfn = __phys_to_pfn(SAMA5D4_BASE_PMC), + .length = SZ_512, + .type = MT_DEVICE, + }, + { /* On sama5d4, we use USART3 as serial console */ + .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3), + .pfn = __phys_to_pfn(SAMA5D4_BASE_USART3), + .length = SZ_256, + .type = MT_DEVICE, + }, + { /* A bunch of peripheral with fine grained IO space */ + .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2), + .pfn = __phys_to_pfn(SAMA5D4_BASE_SYS2), + .length = SZ_2K, + .type = MT_DEVICE, + }, +}; + +static void __init sama5_alt_map_io(void) +{ + at91_alt_map_io(); + iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc)); +} + static const char *sama5_alt_dt_board_compat[] __initconst = { "atmel,sama5d4", NULL }; -DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5 (Device Tree)") +DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5") /* Maintainer: Atmel */ - .map_io = at91_alt_map_io, - .init_early = at91_dt_initialize, + .map_io = sama5_alt_map_io, .init_machine = sama5_dt_device_init, .dt_compat = sama5_alt_dt_board_compat, .l2c_aux_mask = ~0UL, diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c deleted file mode 100644 index 3d775d08de08..000000000000 --- a/arch/arm/mach-at91/sama5d3.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Chip-specific setup code for the SAMA5D3 family - * - * Copyright (C) 2013 Atmel, - * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> - * - * Licensed under GPLv2 or later. - */ - -#include <linux/module.h> -#include <linux/dma-mapping.h> -#include <linux/clk/at91_pmc.h> - -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/sama5d3.h> -#include <mach/cpu.h> - -#include "soc.h" -#include "generic.h" -#include "sam9_smc.h" - -/* -------------------------------------------------------------------- - * AT91SAM9x5 processor initialization - * -------------------------------------------------------------------- */ - -static void __init sama5d3_map_io(void) -{ - at91_init_sram(0, SAMA5D3_SRAM_BASE, SAMA5D3_SRAM_SIZE); -} - -static void __init sama5d3_initialize(void) -{ - at91_sysirq_mask_rtc(SAMA5D3_BASE_RTC); -} - -AT91_SOC_START(sama5d3) - .map_io = sama5d3_map_io, - .init = sama5d3_initialize, -AT91_SOC_END diff --git a/arch/arm/mach-at91/sama5d4.c b/arch/arm/mach-at91/sama5d4.c deleted file mode 100644 index 7638509639f4..000000000000 --- a/arch/arm/mach-at91/sama5d4.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Chip-specific setup code for the SAMA5D4 family - * - * Copyright (C) 2013 Atmel Corporation, - * Nicolas Ferre <nicolas.ferre@atmel.com> - * - * Licensed under GPLv2 or later. - */ - -#include <linux/module.h> -#include <linux/dma-mapping.h> -#include <linux/clk/at91_pmc.h> - -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/sama5d4.h> -#include <mach/cpu.h> -#include <mach/hardware.h> - -#include "soc.h" -#include "generic.h" -#include "sam9_smc.h" - -/* -------------------------------------------------------------------- - * Processor initialization - * -------------------------------------------------------------------- */ -static struct map_desc at91_io_desc[] __initdata = { - { - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC), - .pfn = __phys_to_pfn(SAMA5D4_BASE_MPDDRC), - .length = SZ_512, - .type = MT_DEVICE, - }, - { - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC), - .pfn = __phys_to_pfn(SAMA5D4_BASE_PMC), - .length = SZ_512, - .type = MT_DEVICE, - }, - { /* On sama5d4, we use USART3 as serial console */ - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3), - .pfn = __phys_to_pfn(SAMA5D4_BASE_USART3), - .length = SZ_256, - .type = MT_DEVICE, - }, - { /* A bunch of peripheral with fine grained IO space */ - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2), - .pfn = __phys_to_pfn(SAMA5D4_BASE_SYS2), - .length = SZ_2K, - .type = MT_DEVICE, - }, -}; - - -static void __init sama5d4_map_io(void) -{ - iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc)); - at91_init_sram(0, SAMA5D4_NS_SRAM_BASE, SAMA5D4_NS_SRAM_SIZE); -} - -AT91_SOC_START(sama5d4) - .map_io = sama5d4_map_io, -AT91_SOC_END diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index ce25e85720fb..4e58bc90ed21 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -22,49 +22,12 @@ #include <mach/cpu.h> #include <mach/at91_dbgu.h> -#include "soc.h" #include "generic.h" #include "pm.h" -struct at91_init_soc __initdata at91_boot_soc; - struct at91_socinfo at91_soc_initdata; EXPORT_SYMBOL(at91_soc_initdata); -void __init at91rm9200_set_type(int type) -{ - if (type == ARCH_REVISON_9200_PQFP) - at91_soc_initdata.subtype = AT91_SOC_RM9200_PQFP; - else - at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; - - pr_info("filled in soc subtype: %s\n", - at91_get_soc_subtype(&at91_soc_initdata)); -} - -void __iomem *at91_ramc_base[2]; -EXPORT_SYMBOL_GPL(at91_ramc_base); - -static struct map_desc sram_desc[2] __initdata; - -void __init at91_init_sram(int bank, unsigned long base, unsigned int length) -{ - struct map_desc *desc = &sram_desc[bank]; - - desc->virtual = (unsigned long)AT91_IO_VIRT_BASE - length; - if (bank > 0) - desc->virtual -= sram_desc[bank - 1].length; - - desc->pfn = __phys_to_pfn(base); - desc->length = length; - desc->type = MT_MEMORY_RWX_NONCACHED; - - pr_info("sram at 0x%lx of 0x%x mapped at 0x%lx\n", - base, length, desc->virtual); - - iotable_init(desc, 1); -} - static struct map_desc at91_io_desc __initdata __maybe_unused = { .virtual = (unsigned long)AT91_VA_BASE_SYS, .pfn = __phys_to_pfn(AT91_BASE_SYS), @@ -91,61 +54,51 @@ static void __init soc_detect(u32 dbgu_base) at91_soc_initdata.type = AT91_SOC_RM9200; if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_UNKNOWN) at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; - at91_boot_soc = at91rm9200_soc; break; case ARCH_ID_AT91SAM9260: at91_soc_initdata.type = AT91_SOC_SAM9260; at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - at91_boot_soc = at91sam9260_soc; break; case ARCH_ID_AT91SAM9261: at91_soc_initdata.type = AT91_SOC_SAM9261; at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - at91_boot_soc = at91sam9261_soc; break; case ARCH_ID_AT91SAM9263: at91_soc_initdata.type = AT91_SOC_SAM9263; at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - at91_boot_soc = at91sam9263_soc; break; case ARCH_ID_AT91SAM9G20: at91_soc_initdata.type = AT91_SOC_SAM9G20; at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - at91_boot_soc = at91sam9260_soc; break; case ARCH_ID_AT91SAM9G45: at91_soc_initdata.type = AT91_SOC_SAM9G45; if (cidr == ARCH_ID_AT91SAM9G45ES) at91_soc_initdata.subtype = AT91_SOC_SAM9G45ES; - at91_boot_soc = at91sam9g45_soc; break; case ARCH_ID_AT91SAM9RL64: at91_soc_initdata.type = AT91_SOC_SAM9RL; at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - at91_boot_soc = at91sam9rl_soc; break; case ARCH_ID_AT91SAM9X5: at91_soc_initdata.type = AT91_SOC_SAM9X5; - at91_boot_soc = at91sam9x5_soc; break; case ARCH_ID_AT91SAM9N12: at91_soc_initdata.type = AT91_SOC_SAM9N12; - at91_boot_soc = at91sam9n12_soc; break; case ARCH_ID_SAMA5: at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID); if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) { at91_soc_initdata.type = AT91_SOC_SAMA5D3; - at91_boot_soc = sama5d3_soc; } break; } @@ -154,13 +107,11 @@ static void __init soc_detect(u32 dbgu_base) if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { at91_soc_initdata.type = AT91_SOC_SAM9G10; at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - at91_boot_soc = at91sam9261_soc; } /* at91sam9xe */ else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) { at91_soc_initdata.type = AT91_SOC_SAM9260; at91_soc_initdata.subtype = AT91_SOC_SAM9XE; - at91_boot_soc = at91sam9260_soc; } if (!at91_soc_is_detected()) @@ -240,10 +191,8 @@ static void __init alt_soc_detect(u32 dbgu_base) at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID); if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) { at91_soc_initdata.type = AT91_SOC_SAMA5D3; - at91_boot_soc = sama5d3_soc; } else if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D4) { at91_soc_initdata.type = AT91_SOC_SAMA5D4; - at91_boot_soc = sama5d4_soc; } break; } @@ -349,12 +298,6 @@ void __init at91_map_io(void) if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE) pr_info("Detected soc subtype: %s\n", at91_get_soc_subtype(&at91_soc_initdata)); - - if (!at91_soc_is_enabled()) - panic(pr_fmt("Soc not enabled")); - - if (at91_boot_soc.map_io) - at91_boot_soc.map_io(); } void __init at91_alt_map_io(void) @@ -374,12 +317,6 @@ void __init at91_alt_map_io(void) if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE) pr_info("AT91: Detected soc subtype: %s\n", at91_get_soc_subtype(&at91_soc_initdata)); - - if (!at91_soc_is_enabled()) - panic("AT91: Soc not enabled"); - - if (at91_boot_soc.map_io) - at91_boot_soc.map_io(); } void __iomem *at91_matrix_base; @@ -391,55 +328,3 @@ void __init at91_ioremap_matrix(u32 base_addr) if (!at91_matrix_base) panic(pr_fmt("Impossible to ioremap at91_matrix_base\n")); } - -static struct of_device_id ramc_ids[] = { - { .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby }, - { .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby }, - { .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby }, - { .compatible = "atmel,sama5d3-ddramc", .data = at91_ddr_standby }, - { /*sentinel*/ } -}; - -static void at91_dt_ramc(void) -{ - struct device_node *np; - const struct of_device_id *of_id; - int idx = 0; - const void *standby = NULL; - - for_each_matching_node_and_match(np, ramc_ids, &of_id) { - at91_ramc_base[idx] = of_iomap(np, 0); - if (!at91_ramc_base[idx]) - panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx); - - if (!standby) - standby = of_id->data; - - idx++; - } - - if (!idx) - panic(pr_fmt("unable to find compatible ram controller node in dtb\n")); - - if (!standby) { - pr_warn("ramc no standby function available\n"); - return; - } - - at91_pm_set_standby(standby); -} - -void __init at91rm9200_dt_initialize(void) -{ - at91_dt_ramc(); - - at91_boot_soc.init(); -} - -void __init at91_dt_initialize(void) -{ - at91_dt_ramc(); - - if (at91_boot_soc.init) - at91_boot_soc.init(); -} diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h deleted file mode 100644 index ae6c0b2f1146..000000000000 --- a/arch/arm/mach-at91/soc.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Under GPLv2 - */ - -struct at91_init_soc { - int builtin; - void (*map_io)(void); - void (*init)(void); -}; - -extern struct at91_init_soc at91_boot_soc; -extern struct at91_init_soc at91rm9200_soc; -extern struct at91_init_soc at91sam9260_soc; -extern struct at91_init_soc at91sam9261_soc; -extern struct at91_init_soc at91sam9263_soc; -extern struct at91_init_soc at91sam9g45_soc; -extern struct at91_init_soc at91sam9rl_soc; -extern struct at91_init_soc at91sam9x5_soc; -extern struct at91_init_soc at91sam9n12_soc; -extern struct at91_init_soc sama5d3_soc; -extern struct at91_init_soc sama5d4_soc; - -#define AT91_SOC_START(_name) \ -struct at91_init_soc __initdata _name##_soc \ - __used \ - = { \ - .builtin = 1, \ - -#define AT91_SOC_END \ -}; - -static inline int at91_soc_is_enabled(void) -{ - return at91_boot_soc.builtin; -} - -#if !defined(CONFIG_SOC_AT91RM9200) -#define at91rm9200_soc at91_boot_soc -#endif - -#if !defined(CONFIG_SOC_AT91SAM9260) -#define at91sam9260_soc at91_boot_soc -#endif - -#if !defined(CONFIG_SOC_AT91SAM9261) -#define at91sam9261_soc at91_boot_soc -#endif - -#if !defined(CONFIG_SOC_AT91SAM9263) -#define at91sam9263_soc at91_boot_soc -#endif - -#if !defined(CONFIG_SOC_AT91SAM9G45) -#define at91sam9g45_soc at91_boot_soc -#endif - -#if !defined(CONFIG_SOC_AT91SAM9RL) -#define at91sam9rl_soc at91_boot_soc -#endif - -#if !defined(CONFIG_SOC_AT91SAM9X5) -#define at91sam9x5_soc at91_boot_soc -#endif - -#if !defined(CONFIG_SOC_AT91SAM9N12) -#define at91sam9n12_soc at91_boot_soc -#endif - -#if !defined(CONFIG_SOC_SAMA5D3) -#define sama5d3_soc at91_boot_soc -#endif - -#if !defined(CONFIG_SOC_SAMA5D4) -#define sama5d4_soc at91_boot_soc -#endif diff --git a/arch/arm/mach-at91/sysirq_mask.c b/arch/arm/mach-at91/sysirq_mask.c deleted file mode 100644 index f8bc3511a8c8..000000000000 --- a/arch/arm/mach-at91/sysirq_mask.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * sysirq_mask.c - System-interrupt masking - * - * Copyright (C) 2013 Johan Hovold <jhovold@gmail.com> - * - * Functions to disable system interrupts from backup-powered peripherals. - * - * The RTC and RTT-peripherals are generally powered by backup power (VDDBU) - * and are not reset on wake-up, user, watchdog or software reset. This means - * that their interrupts may be enabled during early boot (e.g. after a user - * reset). - * - * As the RTC and RTT share the system-interrupt line with the PIT, an - * interrupt occurring before a handler has been installed would lead to the - * system interrupt being disabled and prevent the system from booting. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/io.h> -#include <mach/at91_rtt.h> - -#include "generic.h" - -#define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */ -#define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */ -#define AT91_RTC_IRQ_MASK 0x1f /* Available IRQs mask */ - -void __init at91_sysirq_mask_rtc(u32 rtc_base) -{ - void __iomem *base; - - base = ioremap(rtc_base, 64); - if (!base) - return; - - /* - * sam9x5 SoCs have the following errata: - * "RTC: Interrupt Mask Register cannot be used - * Interrupt Mask Register read always returns 0." - * - * Hence we're not relying on IMR values to disable - * interrupts. - */ - writel_relaxed(AT91_RTC_IRQ_MASK, base + AT91_RTC_IDR); - (void)readl_relaxed(base + AT91_RTC_IMR); /* flush */ - - iounmap(base); -} - -void __init at91_sysirq_mask_rtt(u32 rtt_base) -{ - void __iomem *base; - void __iomem *reg; - u32 mode; - - base = ioremap(rtt_base, 16); - if (!base) - return; - - reg = base + AT91_RTT_MR; - - mode = readl_relaxed(reg); - if (mode & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)) { - pr_info("AT91: Disabling rtt irq\n"); - mode &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); - writel_relaxed(mode, reg); - (void)readl_relaxed(reg); /* flush */ - } - - iounmap(base); -} diff --git a/arch/arm/mach-axxia/axxia.c b/arch/arm/mach-axxia/axxia.c index 19e5a1d95397..4db76a493c5a 100644 --- a/arch/arm/mach-axxia/axxia.c +++ b/arch/arm/mach-axxia/axxia.c @@ -16,7 +16,7 @@ #include <linux/init.h> #include <asm/mach/arch.h> -static const char *axxia_dt_match[] __initconst = { +static const char *const axxia_dt_match[] __initconst = { "lsi,axm5516", "lsi,axm5516-sim", "lsi,axm5516-emu", diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index aaeec78c3ec4..8b11f44bb36e 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -68,7 +68,7 @@ config ARCH_BCM_MOBILE This enables support for systems based on Broadcom mobile SoCs. config ARCH_BCM_281XX - bool "Broadcom BCM281XX SoC family" + bool "Broadcom BCM281XX SoC family" if ARCH_MULTI_V7 select ARCH_BCM_MOBILE select HAVE_SMP help @@ -77,7 +77,7 @@ config ARCH_BCM_281XX variants. config ARCH_BCM_21664 - bool "Broadcom BCM21664 SoC family" + bool "Broadcom BCM21664 SoC family" if ARCH_MULTI_V7 select ARCH_BCM_MOBILE select HAVE_SMP help diff --git a/arch/arm/mach-bcm/brcmstb.c b/arch/arm/mach-bcm/brcmstb.c index 60a5afa06ed7..3a60f7ee3f0c 100644 --- a/arch/arm/mach-bcm/brcmstb.c +++ b/arch/arm/mach-bcm/brcmstb.c @@ -17,7 +17,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -static const char *brcmstb_match[] __initconst = { +static const char *const brcmstb_match[] __initconst = { "brcm,bcm7445", "brcm,brcmstb", NULL diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c index 31c87a284a34..e209e6fc7caf 100644 --- a/arch/arm/mach-bcm/platsmp-brcmstb.c +++ b/arch/arm/mach-bcm/platsmp-brcmstb.c @@ -17,6 +17,7 @@ #include <linux/errno.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/jiffies.h> #include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/printk.h> @@ -94,10 +95,35 @@ static u32 pwr_ctrl_rd(u32 cpu) return readl_relaxed(base); } -static void pwr_ctrl_wr(u32 cpu, u32 val) +static void pwr_ctrl_set(unsigned int cpu, u32 val, u32 mask) { void __iomem *base = pwr_ctrl_get_base(cpu); - writel(val, base); + writel((readl(base) & mask) | val, base); +} + +static void pwr_ctrl_clr(unsigned int cpu, u32 val, u32 mask) +{ + void __iomem *base = pwr_ctrl_get_base(cpu); + writel((readl(base) & mask) & ~val, base); +} + +#define POLL_TMOUT_MS 500 +static int pwr_ctrl_wait_tmout(unsigned int cpu, u32 set, u32 mask) +{ + const unsigned long timeo = jiffies + msecs_to_jiffies(POLL_TMOUT_MS); + u32 tmp; + + do { + tmp = pwr_ctrl_rd(cpu) & mask; + if (!set == !tmp) + return 0; + } while (time_before(jiffies, timeo)); + + tmp = pwr_ctrl_rd(cpu) & mask; + if (!set == !tmp) + return 0; + + return -ETIMEDOUT; } static void cpu_rst_cfg_set(u32 cpu, int set) @@ -139,15 +165,22 @@ static void brcmstb_cpu_power_on(u32 cpu) * The secondary cores power was cut, so we must go through * power-on initialization. */ - u32 tmp; + pwr_ctrl_set(cpu, ZONE_MAN_ISO_CNTL_MASK, 0xffffff00); + pwr_ctrl_set(cpu, ZONE_MANUAL_CONTROL_MASK, -1); + pwr_ctrl_set(cpu, ZONE_RESERVED_1_MASK, -1); - /* Request zone power up */ - pwr_ctrl_wr(cpu, ZONE_PWR_UP_REQ_MASK); + pwr_ctrl_set(cpu, ZONE_MAN_MEM_PWR_MASK, -1); - /* Wait for the power up FSM to complete */ - do { - tmp = pwr_ctrl_rd(cpu); - } while (!(tmp & ZONE_PWR_ON_STATE_MASK)); + if (pwr_ctrl_wait_tmout(cpu, 1, ZONE_MEM_PWR_STATE_MASK)) + panic("ZONE_MEM_PWR_STATE_MASK set timeout"); + + pwr_ctrl_set(cpu, ZONE_MAN_CLKEN_MASK, -1); + + if (pwr_ctrl_wait_tmout(cpu, 1, ZONE_DPG_PWR_STATE_MASK)) + panic("ZONE_DPG_PWR_STATE_MASK set timeout"); + + pwr_ctrl_clr(cpu, ZONE_MAN_ISO_CNTL_MASK, -1); + pwr_ctrl_set(cpu, ZONE_MAN_RESET_CNTL_MASK, -1); } static int brcmstb_cpu_get_power_state(u32 cpu) @@ -174,25 +207,33 @@ static void brcmstb_cpu_die(u32 cpu) static int brcmstb_cpu_kill(u32 cpu) { - u32 tmp; + /* + * Ordinarily, the hardware forbids power-down of CPU0 (which is good + * because it is the boot CPU), but this is not true when using BPCM + * manual mode. Consequently, we must avoid turning off CPU0 here to + * ensure that TI2C master reset will work. + */ + if (cpu == 0) { + pr_warn("SMP: refusing to power off CPU0\n"); + return 1; + } while (per_cpu_sw_state_rd(cpu)) ; - /* Program zone reset */ - pwr_ctrl_wr(cpu, ZONE_RESET_STATE_MASK | ZONE_BLK_RST_ASSERT_MASK | - ZONE_PWR_DN_REQ_MASK); + pwr_ctrl_set(cpu, ZONE_MANUAL_CONTROL_MASK, -1); + pwr_ctrl_clr(cpu, ZONE_MAN_RESET_CNTL_MASK, -1); + pwr_ctrl_clr(cpu, ZONE_MAN_CLKEN_MASK, -1); + pwr_ctrl_set(cpu, ZONE_MAN_ISO_CNTL_MASK, -1); + pwr_ctrl_clr(cpu, ZONE_MAN_MEM_PWR_MASK, -1); - /* Verify zone reset */ - tmp = pwr_ctrl_rd(cpu); - if (!(tmp & ZONE_RESET_STATE_MASK)) - pr_err("%s: Zone reset bit for CPU %d not asserted!\n", - __func__, cpu); + if (pwr_ctrl_wait_tmout(cpu, 0, ZONE_MEM_PWR_STATE_MASK)) + panic("ZONE_MEM_PWR_STATE_MASK clear timeout"); - /* Wait for power down */ - do { - tmp = pwr_ctrl_rd(cpu); - } while (!(tmp & ZONE_PWR_OFF_STATE_MASK)); + pwr_ctrl_clr(cpu, ZONE_RESERVED_1_MASK, -1); + + if (pwr_ctrl_wait_tmout(cpu, 0, ZONE_DPG_PWR_STATE_MASK)) + panic("ZONE_DPG_PWR_STATE_MASK clear timeout"); /* Flush pipeline before resetting CPU */ mb(); diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index 45d6bd09e6ef..c622c306c390 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -30,18 +30,15 @@ struct cns3xxx_pcie { unsigned int irqs[2]; struct resource res_io; struct resource res_mem; - struct hw_pci hw_pci; - + int port; bool linked; }; -static struct cns3xxx_pcie cns3xxx_pcie[]; /* forward decl. */ - static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata) { struct pci_sys_data *root = sysdata; - return &cns3xxx_pcie[root->domain]; + return root->private_data; } static struct cns3xxx_pcie *pdev_to_cnspci(const struct pci_dev *dev) @@ -54,8 +51,8 @@ static struct cns3xxx_pcie *pbus_to_cnspci(struct pci_bus *bus) return sysdata_to_cnspci(bus->sysdata); } -static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus, - unsigned int devfn, int where) +static void __iomem *cns3xxx_pci_map_bus(struct pci_bus *bus, + unsigned int devfn, int where) { struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus); int busno = bus->number; @@ -91,55 +88,22 @@ static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus, static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val) { - u32 v; - void __iomem *base; + int ret; u32 mask = (0x1ull << (size * 8)) - 1; int shift = (where % 4) * 8; - base = cns3xxx_pci_cfg_base(bus, devfn, where); - if (!base) { - *val = 0xffffffff; - return PCIBIOS_SUCCESSFUL; - } - - v = __raw_readl(base); + ret = pci_generic_config_read32(bus, devfn, where, size, val); - if (bus->number == 0 && devfn == 0 && - (where & 0xffc) == PCI_CLASS_REVISION) { + if (ret == PCIBIOS_SUCCESSFUL && !bus->number && !devfn && + (where & 0xffc) == PCI_CLASS_REVISION) /* * RC's class is 0xb, but Linux PCI driver needs 0x604 * for a PCIe bridge. So we must fixup the class code * to 0x604 here. */ - v &= 0xff; - v |= 0x604 << 16; - } + *val = ((((*val << shift) & 0xff) | (0x604 << 16)) >> shift) & mask; - *val = (v >> shift) & mask; - - return PCIBIOS_SUCCESSFUL; -} - -static int cns3xxx_pci_write_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - u32 v; - void __iomem *base; - u32 mask = (0x1ull << (size * 8)) - 1; - int shift = (where % 4) * 8; - - base = cns3xxx_pci_cfg_base(bus, devfn, where); - if (!base) - return PCIBIOS_SUCCESSFUL; - - v = __raw_readl(base); - - v &= ~(mask << shift); - v |= (val & mask) << shift; - - __raw_writel(v, base); - - return PCIBIOS_SUCCESSFUL; + return ret; } static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys) @@ -158,8 +122,9 @@ static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys) } static struct pci_ops cns3xxx_pcie_ops = { + .map_bus = cns3xxx_pci_map_bus, .read = cns3xxx_pci_read_config, - .write = cns3xxx_pci_write_config, + .write = pci_generic_config_write, }; static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) @@ -192,13 +157,7 @@ static struct cns3xxx_pcie cns3xxx_pcie[] = { .flags = IORESOURCE_MEM, }, .irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, }, - .hw_pci = { - .domain = 0, - .nr_controllers = 1, - .ops = &cns3xxx_pcie_ops, - .setup = cns3xxx_pci_setup, - .map_irq = cns3xxx_pcie_map_irq, - }, + .port = 0, }, [1] = { .host_regs = (void __iomem *)CNS3XXX_PCIE1_HOST_BASE_VIRT, @@ -217,19 +176,13 @@ static struct cns3xxx_pcie cns3xxx_pcie[] = { .flags = IORESOURCE_MEM, }, .irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, }, - .hw_pci = { - .domain = 1, - .nr_controllers = 1, - .ops = &cns3xxx_pcie_ops, - .setup = cns3xxx_pci_setup, - .map_irq = cns3xxx_pcie_map_irq, - }, + .port = 1, }, }; static void __init cns3xxx_pcie_check_link(struct cns3xxx_pcie *cnspci) { - int port = cnspci->hw_pci.domain; + int port = cnspci->port; u32 reg; unsigned long time; @@ -260,9 +213,9 @@ static void __init cns3xxx_pcie_check_link(struct cns3xxx_pcie *cnspci) static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci) { - int port = cnspci->hw_pci.domain; + int port = cnspci->port; struct pci_sys_data sd = { - .domain = port, + .private_data = cnspci, }; struct pci_bus bus = { .number = 0, @@ -323,6 +276,14 @@ static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr, void __init cns3xxx_pcie_init_late(void) { int i; + void *private_data; + struct hw_pci hw_pci = { + .nr_controllers = 1, + .ops = &cns3xxx_pcie_ops, + .setup = cns3xxx_pci_setup, + .map_irq = cns3xxx_pcie_map_irq, + .private_data = &private_data, + }; pcibios_min_io = 0; pcibios_min_mem = 0; @@ -335,7 +296,8 @@ void __init cns3xxx_pcie_init_late(void) cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i)); cns3xxx_pcie_check_link(&cns3xxx_pcie[i]); cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]); - pci_common_init(&cns3xxx_pcie[i].hw_pci); + private_data = &cns3xxx_pcie[i]; + pci_common_init(&hw_pci); } pci_assign_unassigned_resources(); diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 584e8d4e2892..cd30f6f5f2ff 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -32,12 +32,14 @@ config ARCH_DAVINCI_DM646x config ARCH_DAVINCI_DA830 bool "DA830/OMAP-L137/AM17x based system" + depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR select ARCH_DAVINCI_DA8XX select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1 select CP_INTC config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" + depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR select ARCH_DAVINCI_DA8XX select CP_INTC diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 2204239ed243..2e3464b8bab4 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -27,7 +27,7 @@ obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o obj-$(CONFIG_MACH_NEUROS_OSD2) += board-neuros-osd2.o obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o -obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o cdce949.o +obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index ae129bc49273..846a84ddc28e 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -45,7 +45,6 @@ #include <mach/irqs.h> #include <mach/serial.h> #include <mach/clock.h> -#include <mach/cdce949.h> #include "davinci.h" #include "clock.h" @@ -399,9 +398,6 @@ static struct i2c_board_info __initdata i2c_info[] = { { I2C_BOARD_INFO("cpld_video", 0x3b), }, - { - I2C_BOARD_INFO("cdce949", 0x6c), - }, }; static struct davinci_i2c_platform_data i2c_pdata = { @@ -715,31 +711,6 @@ static void __init evm_init_i2c(void) evm_init_video(); } -#define CDCE949_XIN_RATE 27000000 - -/* CDCE949 support - "lpsc" field is overridden to work as clock number */ -static struct clk cdce_clk_in = { - .name = "cdce_xin", - .rate = CDCE949_XIN_RATE, -}; - -static struct clk_lookup cdce_clks[] = { - CLK(NULL, "xin", &cdce_clk_in), - CLK(NULL, NULL, NULL), -}; - -static void __init cdce_clk_init(void) -{ - struct clk_lookup *c; - struct clk *clk; - - for (c = cdce_clks; c->clk; c++) { - clk = c->clk; - clkdev_add(c); - clk_register(clk); - } -} - #define DM6467T_EVM_REF_FREQ 33000000 static void __init davinci_map_io(void) @@ -748,8 +719,6 @@ static void __init davinci_map_io(void) if (machine_is_davinci_dm6467tevm()) davinci_set_refclk_rate(DM6467T_EVM_REF_FREQ); - - cdce_clk_init(); } #define DM646X_EVM_PHY_ID "davinci_mdio-0:01" diff --git a/arch/arm/mach-davinci/cdce949.c b/arch/arm/mach-davinci/cdce949.c deleted file mode 100644 index abafb92031c0..000000000000 --- a/arch/arm/mach-davinci/cdce949.c +++ /dev/null @@ -1,295 +0,0 @@ -/* - * TI CDCE949 clock synthesizer driver - * - * Note: This implementation assumes an input of 27MHz to the CDCE. - * This is by no means constrained by CDCE hardware although the datasheet - * does use this as an example for all illustrations and more importantly: - * that is the crystal input on boards it is currently used on. - * - * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/module.h> - -#include <mach/clock.h> -#include <mach/cdce949.h> - -#include "clock.h" - -static struct i2c_client *cdce_i2c_client; -static DEFINE_MUTEX(cdce_mutex); - -/* CDCE register descriptor */ -struct cdce_reg { - u8 addr; - u8 val; -}; - -/* Per-Output (Y1, Y2 etc.) frequency descriptor */ -struct cdce_freq { - /* Frequency in KHz */ - unsigned long frequency; - /* - * List of registers to program to obtain a particular frequency. - * 0x0 in register address and value is the end of list marker. - */ - struct cdce_reg *reglist; -}; - -#define CDCE_FREQ_TABLE_ENTRY(line, out) \ -{ \ - .reglist = cdce_y ##line## _ ##out, \ - .frequency = out, \ -} - -/* List of CDCE outputs */ -struct cdce_output { - /* List of frequencies on this output */ - struct cdce_freq *freq_table; - /* Number of possible frequencies */ - int size; -}; - -/* - * Finding out the values to program into CDCE949 registers for a particular - * frequency output is not a simple calculation. Have a look at the datasheet - * for the details. There is desktop software available to help users with - * the calculations. Here, we just depend on the output of that software - * (or hand calculations) instead trying to runtime calculate the register - * values and inflicting misery on ourselves. - */ -static struct cdce_reg cdce_y1_148500[] = { - { 0x13, 0x00 }, - /* program PLL1_0 multiplier */ - { 0x18, 0xaf }, - { 0x19, 0x50 }, - { 0x1a, 0x02 }, - { 0x1b, 0xc9 }, - /* program PLL1_11 multiplier */ - { 0x1c, 0x00 }, - { 0x1d, 0x40 }, - { 0x1e, 0x02 }, - { 0x1f, 0xc9 }, - /* output state selection */ - { 0x15, 0x00 }, - { 0x14, 0xef }, - /* switch MUX to PLL1 output */ - { 0x14, 0x6f }, - { 0x16, 0x06 }, - /* set P2DIV divider, P3DIV and input crystal */ - { 0x17, 0x06 }, - { 0x01, 0x00 }, - { 0x05, 0x48 }, - { 0x02, 0x80 }, - /* enable and disable PLL */ - { 0x02, 0xbc }, - { 0x03, 0x01 }, - { }, -}; - -static struct cdce_reg cdce_y1_74250[] = { - { 0x13, 0x00 }, - { 0x18, 0xaf }, - { 0x19, 0x50 }, - { 0x1a, 0x02 }, - { 0x1b, 0xc9 }, - { 0x1c, 0x00 }, - { 0x1d, 0x40 }, - { 0x1e, 0x02 }, - { 0x1f, 0xc9 }, - /* output state selection */ - { 0x15, 0x00 }, - { 0x14, 0xef }, - /* switch MUX to PLL1 output */ - { 0x14, 0x6f }, - { 0x16, 0x06 }, - /* set P2DIV divider, P3DIV and input crystal */ - { 0x17, 0x06 }, - { 0x01, 0x00 }, - { 0x05, 0x48 }, - { 0x02, 0x80 }, - /* enable and disable PLL */ - { 0x02, 0xbc }, - { 0x03, 0x02 }, - { }, -}; - -static struct cdce_reg cdce_y1_27000[] = { - { 0x13, 0x00 }, - { 0x18, 0x00 }, - { 0x19, 0x40 }, - { 0x1a, 0x02 }, - { 0x1b, 0x08 }, - { 0x1c, 0x00 }, - { 0x1d, 0x40 }, - { 0x1e, 0x02 }, - { 0x1f, 0x08 }, - { 0x15, 0x02 }, - { 0x14, 0xed }, - { 0x16, 0x01 }, - { 0x17, 0x01 }, - { 0x01, 0x00 }, - { 0x05, 0x50 }, - { 0x02, 0xb4 }, - { 0x03, 0x01 }, - { }, -}; - -static struct cdce_freq cdce_y1_freqs[] = { - CDCE_FREQ_TABLE_ENTRY(1, 148500), - CDCE_FREQ_TABLE_ENTRY(1, 74250), - CDCE_FREQ_TABLE_ENTRY(1, 27000), -}; - -static struct cdce_reg cdce_y5_13500[] = { - { 0x27, 0x08 }, - { 0x28, 0x00 }, - { 0x29, 0x40 }, - { 0x2a, 0x02 }, - { 0x2b, 0x08 }, - { 0x24, 0x6f }, - { }, -}; - -static struct cdce_reg cdce_y5_16875[] = { - { 0x27, 0x08 }, - { 0x28, 0x9f }, - { 0x29, 0xb0 }, - { 0x2a, 0x02 }, - { 0x2b, 0x89 }, - { 0x24, 0x6f }, - { }, -}; - -static struct cdce_reg cdce_y5_27000[] = { - { 0x27, 0x04 }, - { 0x28, 0x00 }, - { 0x29, 0x40 }, - { 0x2a, 0x02 }, - { 0x2b, 0x08 }, - { 0x24, 0x6f }, - { }, -}; -static struct cdce_reg cdce_y5_54000[] = { - { 0x27, 0x04 }, - { 0x28, 0xff }, - { 0x29, 0x80 }, - { 0x2a, 0x02 }, - { 0x2b, 0x07 }, - { 0x24, 0x6f }, - { }, -}; - -static struct cdce_reg cdce_y5_81000[] = { - { 0x27, 0x02 }, - { 0x28, 0xbf }, - { 0x29, 0xa0 }, - { 0x2a, 0x03 }, - { 0x2b, 0x0a }, - { 0x24, 0x6f }, - { }, -}; - -static struct cdce_freq cdce_y5_freqs[] = { - CDCE_FREQ_TABLE_ENTRY(5, 13500), - CDCE_FREQ_TABLE_ENTRY(5, 16875), - CDCE_FREQ_TABLE_ENTRY(5, 27000), - CDCE_FREQ_TABLE_ENTRY(5, 54000), - CDCE_FREQ_TABLE_ENTRY(5, 81000), -}; - - -static struct cdce_output output_list[] = { - [1] = { cdce_y1_freqs, ARRAY_SIZE(cdce_y1_freqs) }, - [5] = { cdce_y5_freqs, ARRAY_SIZE(cdce_y5_freqs) }, -}; - -int cdce_set_rate(struct clk *clk, unsigned long rate) -{ - int i, ret = 0; - struct cdce_freq *freq_table = output_list[clk->lpsc].freq_table; - struct cdce_reg *regs = NULL; - - if (!cdce_i2c_client) - return -ENODEV; - - if (!freq_table) - return -EINVAL; - - for (i = 0; i < output_list[clk->lpsc].size; i++) { - if (freq_table[i].frequency == rate / 1000) { - regs = freq_table[i].reglist; - break; - } - } - - if (!regs) - return -EINVAL; - - mutex_lock(&cdce_mutex); - for (i = 0; regs[i].addr; i++) { - ret = i2c_smbus_write_byte_data(cdce_i2c_client, - regs[i].addr | 0x80, regs[i].val); - if (ret) - break; - } - mutex_unlock(&cdce_mutex); - - if (!ret) - clk->rate = rate; - - return ret; -} - -static int cdce_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - cdce_i2c_client = client; - return 0; -} - -static int cdce_remove(struct i2c_client *client) -{ - cdce_i2c_client = NULL; - return 0; -} - -static const struct i2c_device_id cdce_id[] = { - {"cdce949", 0}, - {}, -}; -MODULE_DEVICE_TABLE(i2c, cdce_id); - -static struct i2c_driver cdce_driver = { - .driver = { - .owner = THIS_MODULE, - .name = "cdce949", - }, - .probe = cdce_probe, - .remove = cdce_remove, - .id_table = cdce_id, -}; - -static int __init cdce_init(void) -{ - return i2c_add_driver(&cdce_driver); -} -subsys_initcall(cdce_init); - -static void __exit cdce_exit(void) -{ - i2c_del_driver(&cdce_driver); -} -module_exit(cdce_exit); - -MODULE_AUTHOR("Texas Instruments"); -MODULE_DESCRIPTION("CDCE949 clock synthesizer driver"); -MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index f703d82f08a8..438f68547f4c 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -20,7 +20,7 @@ #define DA8XX_NUM_UARTS 3 -static struct of_device_id da8xx_irq_match[] __initdata = { +static const struct of_device_id da8xx_irq_match[] __initconst = { { .compatible = "ti,cp-intc", .data = cp_intc_of_init, }, { } }; diff --git a/arch/arm/mach-davinci/include/mach/cdce949.h b/arch/arm/mach-davinci/include/mach/cdce949.h deleted file mode 100644 index c73331fae341..000000000000 --- a/arch/arm/mach-davinci/include/mach/cdce949.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * TI CDCE949 off-chip clock synthesizer support - * - * 2009 (C) Texas Instruments, Inc. http://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ -#ifndef _MACH_DAVINCI_CDCE949_H -#define _MACH_DAVINCI_CDCE949_H - -#include <linux/clk.h> - -#include <mach/clock.h> - -int cdce_set_rate(struct clk *clk, unsigned long rate); - -#endif diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c index a8eb909a2b6c..6a2ff0a654a5 100644 --- a/arch/arm/mach-davinci/mux.c +++ b/arch/arm/mach-davinci/mux.c @@ -30,7 +30,7 @@ static void __iomem *pinmux_base; /* * Sets the DAVINCI MUX register based on the table */ -int __init_or_module davinci_cfg_reg(const unsigned long index) +int davinci_cfg_reg(const unsigned long index) { static DEFINE_SPINLOCK(mux_spin_lock); struct davinci_soc_info *soc_info = &davinci_soc_info; @@ -101,7 +101,7 @@ int __init_or_module davinci_cfg_reg(const unsigned long index) } EXPORT_SYMBOL(davinci_cfg_reg); -int __init_or_module davinci_cfg_reg_list(const short pins[]) +int davinci_cfg_reg_list(const short pins[]) { int i, error = -EINVAL; diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index 5e93a734c858..951b620bfa73 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -31,16 +31,6 @@ #include <mach/serial.h> #include <mach/cputype.h> -static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, - int offset) -{ - offset <<= up->regshift; - - WARN_ONCE(!up->membase, "unmapped read: uart[%d]\n", offset); - - return (unsigned int)__raw_readl(up->membase + offset); -} - static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, int value) { diff --git a/arch/arm/mach-digicolor/Kconfig b/arch/arm/mach-digicolor/Kconfig new file mode 100644 index 000000000000..4f36d8d2bc57 --- /dev/null +++ b/arch/arm/mach-digicolor/Kconfig @@ -0,0 +1,7 @@ +config ARCH_DIGICOLOR + bool "Conexant Digicolor SoC Support" + depends on ARCH_MULTI_V7 + select CLKSRC_MMIO + select DIGICOLOR_TIMER + select GENERIC_IRQ_CHIP + select MFD_SYSCON diff --git a/arch/arm/mach-digicolor/Makefile b/arch/arm/mach-digicolor/Makefile new file mode 100644 index 000000000000..3d8a1d228408 --- /dev/null +++ b/arch/arm/mach-digicolor/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ARCH_DIGICOLOR) += digicolor.o diff --git a/arch/arm/mach-digicolor/digicolor.c b/arch/arm/mach-digicolor/digicolor.c new file mode 100644 index 000000000000..cfc88d1caa47 --- /dev/null +++ b/arch/arm/mach-digicolor/digicolor.c @@ -0,0 +1,18 @@ +/* + * Support for Conexant Digicolor SoCs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <asm/mach/arch.h> + +static const char *digicolor_dt_compat[] __initconst = { + "cnxt,cx92755", + NULL, +}; + +DT_MACHINE_START(DIGICOLOR, "Conexant Digicolor (Flattened Device Tree)") + .dt_compat = digicolor_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 865f878063cc..f70eca7ee705 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -13,6 +13,7 @@ #define __ARCH_ARM_MACH_EXYNOS_COMMON_H #include <linux/of.h> +#include <linux/platform_data/cpuidle-exynos.h> #define EXYNOS3250_SOC_ID 0xE3472000 #define EXYNOS3_SOC_MASK 0xFFFFF000 @@ -150,8 +151,11 @@ extern void exynos_pm_central_suspend(void); extern int exynos_pm_central_resume(void); extern void exynos_enter_aftr(void); +extern struct cpuidle_exynos_data cpuidle_coupled_exynos_data; + extern void s5p_init_cpu(void __iomem *cpuid_addr); extern unsigned int samsung_rev(void); +extern void __iomem *cpu_boot_reg_base(void); static inline void pmu_raw_writel(u32 val, u32 offset) { diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index c13d0837fa8c..9e9dfdfad9d7 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -27,20 +27,16 @@ #include <asm/mach/map.h> #include <asm/memory.h> +#include <mach/map.h> + #include "common.h" #include "mfc.h" #include "regs-pmu.h" -#include "regs-sys.h" void __iomem *pmu_base_addr; static struct map_desc exynos4_iodesc[] __initdata = { { - .virtual = (unsigned long)S3C_VA_SYS, - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSCON), - .length = SZ_64K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S5P_VA_SROMC, .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC), .length = SZ_4K, @@ -70,11 +66,6 @@ static struct map_desc exynos4_iodesc[] __initdata = { static struct map_desc exynos5_iodesc[] __initdata = { { - .virtual = (unsigned long)S3C_VA_SYS, - .pfn = __phys_to_pfn(EXYNOS5_PA_SYSCON), - .length = SZ_64K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S5P_VA_SROMC, .pfn = __phys_to_pfn(EXYNOS5_PA_SROMC), .length = SZ_4K, @@ -213,32 +204,6 @@ static void __init exynos_init_irq(void) static void __init exynos_dt_machine_init(void) { - struct device_node *i2c_np; - const char *i2c_compat = "samsung,s3c2440-i2c"; - unsigned int tmp; - int id; - - /* - * Exynos5's legacy i2c controller and new high speed i2c - * controller have muxed interrupt sources. By default the - * interrupts for 4-channel HS-I2C controller are enabled. - * If node for first four channels of legacy i2c controller - * are available then re-configure the interrupts via the - * system register. - */ - if (soc_is_exynos5()) { - for_each_compatible_node(i2c_np, NULL, i2c_compat) { - if (of_device_is_available(i2c_np)) { - id = of_alias_get_id(i2c_np, "i2c"); - if (id < 4) { - tmp = readl(EXYNOS5_SYS_I2C_CFG); - writel(tmp & ~(0x1 << id), - EXYNOS5_SYS_I2C_CFG); - } - } - } - } - /* * This is called from smp_prepare_cpus if we've built for SMP, but * we still need to set it up for PM and firmware ops if not. @@ -246,6 +211,10 @@ static void __init exynos_dt_machine_init(void) if (!IS_ENABLED(CONFIG_SMP)) exynos_sysram_init(); +#ifdef CONFIG_ARM_EXYNOS_CPUIDLE + if (of_machine_is_compatible("samsung,exynos4210")) + exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data; +#endif if (of_machine_is_compatible("samsung,exynos4210") || of_machine_is_compatible("samsung,exynos4212") || (of_machine_is_compatible("samsung,exynos4412") && @@ -258,7 +227,7 @@ static void __init exynos_dt_machine_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static char const *exynos_dt_compat[] __initconst = { +static char const *const exynos_dt_compat[] __initconst = { "samsung,exynos3", "samsung,exynos3250", "samsung,exynos4", @@ -282,6 +251,7 @@ static void __init exynos_reserve(void) "samsung,mfc-v5", "samsung,mfc-v6", "samsung,mfc-v7", + "samsung,mfc-v8", }; for (i = 0; i < ARRAY_SIZE(mfc_mem); i++) diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index 766f57d2f029..4791a3cc00f9 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -17,6 +17,7 @@ #include <asm/cacheflush.h> #include <asm/cputype.h> #include <asm/firmware.h> +#include <asm/hardware/cache-l2x0.h> #include <asm/suspend.h> #include <mach/map.h> @@ -136,6 +137,43 @@ static const struct firmware_ops exynos_firmware_ops = { .resume = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_resume : NULL, }; +static void exynos_l2_write_sec(unsigned long val, unsigned reg) +{ + static int l2cache_enabled; + + switch (reg) { + case L2X0_CTRL: + if (val & L2X0_CTRL_EN) { + /* + * Before the cache can be enabled, due to firmware + * design, SMC_CMD_L2X0INVALL must be called. + */ + if (!l2cache_enabled) { + exynos_smc(SMC_CMD_L2X0INVALL, 0, 0, 0); + l2cache_enabled = 1; + } + } else { + l2cache_enabled = 0; + } + exynos_smc(SMC_CMD_L2X0CTRL, val, 0, 0); + break; + + case L2X0_DEBUG_CTRL: + exynos_smc(SMC_CMD_L2X0DEBUG, val, 0, 0); + break; + + default: + WARN_ONCE(1, "%s: ignoring write to reg 0x%x\n", __func__, reg); + } +} + +static void exynos_l2_configure(const struct l2x0_regs *regs) +{ + exynos_smc(SMC_CMD_L2X0SETUP1, regs->tag_latency, regs->data_latency, + regs->prefetch_ctrl); + exynos_smc(SMC_CMD_L2X0SETUP2, regs->pwr_ctrl, regs->aux_ctrl, 0); +} + void __init exynos_firmware_init(void) { struct device_node *nd; @@ -155,4 +193,16 @@ void __init exynos_firmware_init(void) pr_info("Running under secure firmware.\n"); register_firmware_ops(&exynos_firmware_ops); + + /* + * Exynos 4 SoCs (based on Cortex A9 and equipped with L2C-310), + * running under secure firmware, require certain registers of L2 + * cache controller to be written in secure mode. Here .write_sec + * callback is provided to perform necessary SMC calls. + */ + if (IS_ENABLED(CONFIG_CACHE_L2X0) && + read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) { + outer_cache.write_sec = exynos_l2_write_sec; + outer_cache.configure = exynos_l2_configure; + } } diff --git a/arch/arm/mach-exynos/include/mach/dma.h b/arch/arm/mach-exynos/include/mach/dma.h deleted file mode 100644 index 201842a3769e..000000000000 --- a/arch/arm/mach-exynos/include/mach/dma.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __MACH_DMA_H -#define __MACH_DMA_H - -/* This platform uses the common DMA API driver for PL330 */ -#include <plat/dma-pl330.h> - -#endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 1ad3f496ef56..de3ae59e1cfb 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -24,9 +24,6 @@ #define EXYNOS_PA_CHIPID 0x10000000 -#define EXYNOS4_PA_SYSCON 0x10010000 -#define EXYNOS5_PA_SYSCON 0x10050100 - #define EXYNOS4_PA_CMU 0x10030000 #define EXYNOS5_PA_CMU 0x10010000 diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 7a1ebfeeeeb8..d2e9f12d12f1 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -126,8 +126,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) */ void exynos_cpu_power_down(int cpu) { - if (cpu == 0 && (of_machine_is_compatible("samsung,exynos5420") || - of_machine_is_compatible("samsung,exynos5800"))) { + if (cpu == 0 && (soc_is_exynos5420() || soc_is_exynos5800())) { /* * Bypass power down for CPU0 during suspend. Check for * the SYS_PWR_REG value to decide if we are suspending @@ -194,7 +193,7 @@ int exynos_cluster_power_state(int cluster) S5P_CORE_LOCAL_PWR_EN); } -static inline void __iomem *cpu_boot_reg_base(void) +void __iomem *cpu_boot_reg_base(void) { if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1) return pmu_base_addr + S5P_INFORM5; diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 86f3ecd88f78..e6209dadc00d 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -23,12 +23,13 @@ #include <asm/smp_scu.h> #include <asm/suspend.h> +#include <mach/map.h> + #include <plat/pm-common.h> #include "common.h" #include "exynos-pmu.h" #include "regs-pmu.h" -#include "regs-sys.h" static inline void __iomem *exynos_boot_vector_addr(void) { @@ -97,10 +98,6 @@ void exynos_pm_central_suspend(void) tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); tmp &= ~S5P_CENTRAL_LOWPWR_CFG; pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); - - /* Setting SEQ_OPTION register */ - pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0, - S5P_CENTRAL_SEQ_OPTION); } int exynos_pm_central_resume(void) @@ -164,6 +161,13 @@ void exynos_enter_aftr(void) exynos_pm_central_suspend(); + if (of_machine_is_compatible("samsung,exynos4212") || + of_machine_is_compatible("samsung,exynos4412")) { + /* Setting SEQ_OPTION register */ + pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0, + S5P_CENTRAL_SEQ_OPTION); + } + cpu_suspend(0, exynos_aftr_finisher); if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) { @@ -176,3 +180,125 @@ void exynos_enter_aftr(void) cpu_pm_exit(); } + +static atomic_t cpu1_wakeup = ATOMIC_INIT(0); + +static int exynos_cpu0_enter_aftr(void) +{ + int ret = -1; + + /* + * If the other cpu is powered on, we have to power it off, because + * the AFTR state won't work otherwise + */ + if (cpu_online(1)) { + /* + * We reach a sync point with the coupled idle state, we know + * the other cpu will power down itself or will abort the + * sequence, let's wait for one of these to happen + */ + while (exynos_cpu_power_state(1)) { + /* + * The other cpu may skip idle and boot back + * up again + */ + if (atomic_read(&cpu1_wakeup)) + goto abort; + + /* + * The other cpu may bounce through idle and + * boot back up again, getting stuck in the + * boot rom code + */ + if (__raw_readl(cpu_boot_reg_base()) == 0) + goto abort; + + cpu_relax(); + } + } + + exynos_enter_aftr(); + ret = 0; + +abort: + if (cpu_online(1)) { + /* + * Set the boot vector to something non-zero + */ + __raw_writel(virt_to_phys(exynos_cpu_resume), + cpu_boot_reg_base()); + dsb(); + + /* + * Turn on cpu1 and wait for it to be on + */ + exynos_cpu_power_up(1); + while (exynos_cpu_power_state(1) != S5P_CORE_LOCAL_PWR_EN) + cpu_relax(); + + while (!atomic_read(&cpu1_wakeup)) { + /* + * Poke cpu1 out of the boot rom + */ + __raw_writel(virt_to_phys(exynos_cpu_resume), + cpu_boot_reg_base()); + + arch_send_wakeup_ipi_mask(cpumask_of(1)); + } + } + + return ret; +} + +static int exynos_wfi_finisher(unsigned long flags) +{ + cpu_do_idle(); + + return -1; +} + +static int exynos_cpu1_powerdown(void) +{ + int ret = -1; + + /* + * Idle sequence for cpu1 + */ + if (cpu_pm_enter()) + goto cpu1_aborted; + + /* + * Turn off cpu 1 + */ + exynos_cpu_power_down(1); + + ret = cpu_suspend(0, exynos_wfi_finisher); + + cpu_pm_exit(); + +cpu1_aborted: + dsb(); + /* + * Notify cpu 0 that cpu 1 is awake + */ + atomic_set(&cpu1_wakeup, 1); + + return ret; +} + +static void exynos_pre_enter_aftr(void) +{ + __raw_writel(virt_to_phys(exynos_cpu_resume), cpu_boot_reg_base()); +} + +static void exynos_post_enter_aftr(void) +{ + atomic_set(&cpu1_wakeup, 0); +} + +struct cpuidle_exynos_data cpuidle_coupled_exynos_data = { + .cpu0_enter_aftr = exynos_cpu0_enter_aftr, + .cpu1_powerdown = exynos_cpu1_powerdown, + .pre_enter_aftr = exynos_pre_enter_aftr, + .post_enter_aftr = exynos_post_enter_aftr, +}; diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 20f267121b3e..37266a826437 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -161,6 +161,34 @@ no_clk: of_genpd_add_provider_simple(np, &pd->pd); } + /* Assign the child power domains to their parents */ + for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { + struct generic_pm_domain *child_domain, *parent_domain; + struct of_phandle_args args; + + args.np = np; + args.args_count = 0; + child_domain = of_genpd_get_from_provider(&args); + if (!child_domain) + continue; + + if (of_parse_phandle_with_args(np, "power-domains", + "#power-domain-cells", 0, &args) != 0) + continue; + + parent_domain = of_genpd_get_from_provider(&args); + if (!parent_domain) + continue; + + if (pm_genpd_add_subdomain(parent_domain, child_domain)) + pr_warn("%s failed to add subdomain: %s\n", + parent_domain->name, child_domain->name); + else + pr_info("%s has as child subdomain: %s.\n", + parent_domain->name, child_domain->name); + of_node_put(np); + } + return 0; } arch_initcall(exynos4_pm_init_power_domain); diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h index b5f4406fc1b5..eb461e1c325a 100644 --- a/arch/arm/mach-exynos/regs-pmu.h +++ b/arch/arm/mach-exynos/regs-pmu.h @@ -160,12 +160,14 @@ #define EXYNOS5_L2RSTDISABLE_VALUE BIT(3) #define S5P_PAD_RET_MAUDIO_OPTION 0x3028 +#define S5P_PAD_RET_MMC2_OPTION 0x30c8 #define S5P_PAD_RET_GPIO_OPTION 0x3108 #define S5P_PAD_RET_UART_OPTION 0x3128 #define S5P_PAD_RET_MMCA_OPTION 0x3148 #define S5P_PAD_RET_MMCB_OPTION 0x3168 #define S5P_PAD_RET_EBIA_OPTION 0x3188 #define S5P_PAD_RET_EBIB_OPTION 0x31A8 +#define S5P_PAD_RET_SPI_OPTION 0x31c8 #define S5P_PS_HOLD_CONTROL 0x330C #define S5P_PS_HOLD_EN (1 << 31) @@ -326,6 +328,7 @@ (EXYNOS3_ARM_CORE0_OPTION + ((_nr) * 0x80)) #define EXYNOS3_ARM_COMMON_OPTION 0x2408 +#define EXYNOS3_ARM_L2_OPTION 0x2608 #define EXYNOS3_TOP_PWR_OPTION 0x2C48 #define EXYNOS3_CORE_TOP_PWR_OPTION 0x2CA8 #define EXYNOS3_XUSBXTI_DURATION 0x341C diff --git a/arch/arm/mach-exynos/regs-sys.h b/arch/arm/mach-exynos/regs-sys.h deleted file mode 100644 index 84332b0dd7a6..000000000000 --- a/arch/arm/mach-exynos/regs-sys.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (c) 2014 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - system register definition - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_SYS_H -#define __ASM_ARCH_REGS_SYS_H __FILE__ - -#include <mach/map.h> - -#define S5P_SYSREG(x) (S3C_VA_SYS + (x)) - -/* For EXYNOS5 */ -#define EXYNOS5_SYS_I2C_CFG S5P_SYSREG(0x0234) - -#endif /* __ASM_ARCH_REGS_SYS_H */ diff --git a/arch/arm/mach-exynos/sleep.S b/arch/arm/mach-exynos/sleep.S index e3c373082bbe..31d25834b9c4 100644 --- a/arch/arm/mach-exynos/sleep.S +++ b/arch/arm/mach-exynos/sleep.S @@ -16,6 +16,8 @@ */ #include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/hardware/cache-l2x0.h> #include "smc.h" #define CPU_MASK 0xff0ffff0 @@ -74,6 +76,45 @@ ENTRY(exynos_cpu_resume_ns) mov r0, #SMC_CMD_C15RESUME dsb smc #0 +#ifdef CONFIG_CACHE_L2X0 + adr r0, 1f + ldr r2, [r0] + add r0, r2, r0 + + /* Check that the address has been initialised. */ + ldr r1, [r0, #L2X0_R_PHY_BASE] + teq r1, #0 + beq skip_l2x0 + + /* Check if controller has been enabled. */ + ldr r2, [r1, #L2X0_CTRL] + tst r2, #0x1 + bne skip_l2x0 + + ldr r1, [r0, #L2X0_R_TAG_LATENCY] + ldr r2, [r0, #L2X0_R_DATA_LATENCY] + ldr r3, [r0, #L2X0_R_PREFETCH_CTRL] + mov r0, #SMC_CMD_L2X0SETUP1 + smc #0 + + /* Reload saved regs pointer because smc corrupts registers. */ + adr r0, 1f + ldr r2, [r0] + add r0, r2, r0 + + ldr r1, [r0, #L2X0_R_PWR_CTRL] + ldr r2, [r0, #L2X0_R_AUX_CTRL] + mov r0, #SMC_CMD_L2X0SETUP2 + smc #0 + + mov r0, #SMC_CMD_L2X0INVALL + smc #0 + + mov r1, #1 + mov r0, #SMC_CMD_L2X0CTRL + smc #0 +skip_l2x0: +#endif /* CONFIG_CACHE_L2X0 */ skip_cp15: b cpu_resume ENDPROC(exynos_cpu_resume_ns) @@ -83,3 +124,8 @@ cp15_save_diag: .globl cp15_save_power cp15_save_power: .long 0 @ cp15 power control + +#ifdef CONFIG_CACHE_L2X0 + .align +1: .long l2x0_saved_regs - . +#endif /* CONFIG_CACHE_L2X0 */ diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index f8e7dcd17055..318d127df147 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -34,7 +34,6 @@ #include "common.h" #include "regs-pmu.h" -#include "regs-sys.h" #include "exynos-pmu.h" #define S5P_CHECK_SLEEP 0x00000BAD @@ -53,10 +52,6 @@ struct exynos_wkup_irq { u32 mask; }; -static struct sleep_save exynos5_sys_save[] = { - SAVE_ITEM(EXYNOS5_SYS_I2C_CFG), -}; - static struct sleep_save exynos_core_save[] = { /* SROM side */ SAVE_ITEM(S5P_SROM_BW), @@ -91,6 +86,12 @@ static unsigned int exynos_pmu_spare3; static u32 exynos_irqwake_intmask = 0xffffffff; +static const struct exynos_wkup_irq exynos3250_wkup_irq[] = { + { 105, BIT(1) }, /* RTC alarm */ + { 106, BIT(2) }, /* RTC tick */ + { /* sentinel */ }, +}; + static const struct exynos_wkup_irq exynos4_wkup_irq[] = { { 76, BIT(1) }, /* RTC alarm */ { 77, BIT(2) }, /* RTC tick */ @@ -114,6 +115,19 @@ unsigned int exynos_release_ret_regs[] = { REG_TABLE_END, }; +unsigned int exynos3250_release_ret_regs[] = { + S5P_PAD_RET_MAUDIO_OPTION, + S5P_PAD_RET_GPIO_OPTION, + S5P_PAD_RET_UART_OPTION, + S5P_PAD_RET_MMCA_OPTION, + S5P_PAD_RET_MMCB_OPTION, + S5P_PAD_RET_EBIA_OPTION, + S5P_PAD_RET_EBIB_OPTION, + S5P_PAD_RET_MMC2_OPTION, + S5P_PAD_RET_SPI_OPTION, + REG_TABLE_END, +}; + unsigned int exynos5420_release_ret_regs[] = { EXYNOS_PAD_RET_DRAM_OPTION, EXYNOS_PAD_RET_MAUDIO_OPTION, @@ -173,6 +187,12 @@ static int exynos_cpu_suspend(unsigned long arg) return exynos_cpu_do_idle(); } +static int exynos3250_cpu_suspend(unsigned long arg) +{ + flush_cache_all(); + return exynos_cpu_do_idle(); +} + static int exynos5420_cpu_suspend(unsigned long arg) { /* MCPM works with HW CPU identifiers */ @@ -230,6 +250,23 @@ static void exynos_pm_prepare(void) pmu_raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0); } +static void exynos3250_pm_prepare(void) +{ + unsigned int tmp; + + /* Set wake-up mask registers */ + exynos_pm_set_wakeup_mask(); + + tmp = pmu_raw_readl(EXYNOS3_ARM_L2_OPTION); + tmp &= ~EXYNOS5_OPTION_USE_RETENTION; + pmu_raw_writel(tmp, EXYNOS3_ARM_L2_OPTION); + + exynos_pm_enter_sleep_mode(); + + /* ensure at least INFORM0 has the resume address */ + pmu_raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0); +} + static void exynos5420_pm_prepare(void) { unsigned int tmp; @@ -282,6 +319,10 @@ static int exynos_pm_suspend(void) { exynos_pm_central_suspend(); + /* Setting SEQ_OPTION register */ + pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0, + S5P_CENTRAL_SEQ_OPTION); + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) exynos_cpu_save_register(); @@ -344,6 +385,28 @@ early_wakeup: pmu_raw_writel(0x0, S5P_INFORM1); } +static void exynos3250_pm_resume(void) +{ + u32 cpuid = read_cpuid_part(); + + if (exynos_pm_central_resume()) + goto early_wakeup; + + /* For release retention */ + exynos_pm_release_retention(); + + pmu_raw_writel(S5P_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION); + + if (call_firmware_op(resume) == -ENOSYS + && cpuid == ARM_CPU_PART_CORTEX_A9) + exynos_cpu_restore_register(); + +early_wakeup: + + /* Clear SLEEP mode set in INFORM1 */ + pmu_raw_writel(0x0, S5P_INFORM1); +} + static void exynos5420_prepare_pm_resume(void) { if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) @@ -483,6 +546,16 @@ static const struct platform_suspend_ops exynos_suspend_ops = { .valid = suspend_valid_only_mem, }; +static const struct exynos_pm_data exynos3250_pm_data = { + .wkup_irq = exynos3250_wkup_irq, + .wake_disable_mask = ((0xFF << 8) | (0x1F << 1)), + .release_ret_regs = exynos3250_release_ret_regs, + .pm_suspend = exynos_pm_suspend, + .pm_resume = exynos3250_pm_resume, + .pm_prepare = exynos3250_pm_prepare, + .cpu_suspend = exynos3250_cpu_suspend, +}; + static const struct exynos_pm_data exynos4_pm_data = { .wkup_irq = exynos4_wkup_irq, .wake_disable_mask = ((0xFF << 8) | (0x1F << 1)), @@ -497,8 +570,6 @@ static const struct exynos_pm_data exynos5250_pm_data = { .wkup_irq = exynos5250_wkup_irq, .wake_disable_mask = ((0xFF << 8) | (0x1F << 1)), .release_ret_regs = exynos_release_ret_regs, - .extra_save = exynos5_sys_save, - .num_extra_save = ARRAY_SIZE(exynos5_sys_save), .pm_suspend = exynos_pm_suspend, .pm_resume = exynos_pm_resume, .pm_prepare = exynos_pm_prepare, @@ -516,8 +587,11 @@ static struct exynos_pm_data exynos5420_pm_data = { .cpu_suspend = exynos5420_cpu_suspend, }; -static struct of_device_id exynos_pmu_of_device_ids[] = { +static const struct of_device_id exynos_pmu_of_device_ids[] __initconst = { { + .compatible = "samsung,exynos3250-pmu", + .data = &exynos3250_pm_data, + }, { .compatible = "samsung,exynos4210-pmu", .data = &exynos4_pm_data, }, { diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 07a09570175d..231fba0d03e5 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -169,7 +169,7 @@ static void __init highbank_init(void) platform_device_register(&highbank_cpuidle_device); } -static const char *highbank_match[] __initconst = { +static const char *const highbank_match[] __initconst = { "calxeda,highbank", "calxeda,ecx-2000", NULL, diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig index cd19433f76d3..83061ad0e282 100644 --- a/arch/arm/mach-hisi/Kconfig +++ b/arch/arm/mach-hisi/Kconfig @@ -22,6 +22,14 @@ config ARCH_HI3xxx help Support for Hisilicon Hi36xx SoC family +config ARCH_HIP01 + bool "Hisilicon HIP01 family" if ARCH_MULTI_V7 + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select ARM_GLOBAL_TIMER + help + Support for Hisilicon HIP01 SoC family + config ARCH_HIP04 bool "Hisilicon HiP04 Cortex A15 family" if ARCH_MULTI_V7 select ARM_ERRATA_798181 if SMP diff --git a/arch/arm/mach-hisi/core.h b/arch/arm/mach-hisi/core.h index 88b1f487d065..92a682d8e939 100644 --- a/arch/arm/mach-hisi/core.h +++ b/arch/arm/mach-hisi/core.h @@ -12,9 +12,12 @@ extern void hi3xxx_cpu_die(unsigned int cpu); extern int hi3xxx_cpu_kill(unsigned int cpu); extern void hi3xxx_set_cpu(int cpu, bool enable); -extern void hix5hd2_secondary_startup(void); +extern void hisi_secondary_startup(void); extern struct smp_operations hix5hd2_smp_ops; extern void hix5hd2_set_cpu(int cpu, bool enable); extern void hix5hd2_cpu_die(unsigned int cpu); +extern struct smp_operations hip01_smp_ops; +extern void hip01_set_cpu(int cpu, bool enable); +extern void hip01_cpu_die(unsigned int cpu); #endif diff --git a/arch/arm/mach-hisi/headsmp.S b/arch/arm/mach-hisi/headsmp.S index 278889c00b77..81e35b159e75 100644 --- a/arch/arm/mach-hisi/headsmp.S +++ b/arch/arm/mach-hisi/headsmp.S @@ -11,6 +11,6 @@ __CPUINIT -ENTRY(hix5hd2_secondary_startup) +ENTRY(hisi_secondary_startup) bl v7_invalidate_l1 b secondary_startup diff --git a/arch/arm/mach-hisi/hisilicon.c b/arch/arm/mach-hisi/hisilicon.c index 7744c351bbfd..c6bd7c7bd4aa 100644 --- a/arch/arm/mach-hisi/hisilicon.c +++ b/arch/arm/mach-hisi/hisilicon.c @@ -45,7 +45,7 @@ static void __init hi3620_map_io(void) iotable_init(hi3620_io_desc, ARRAY_SIZE(hi3620_io_desc)); } -static const char *hi3xxx_compat[] __initconst = { +static const char *const hi3xxx_compat[] __initconst = { "hisilicon,hi3620-hi4511", NULL, }; @@ -55,7 +55,7 @@ DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)") .dt_compat = hi3xxx_compat, MACHINE_END -static const char *hix5hd2_compat[] __initconst = { +static const char *const hix5hd2_compat[] __initconst = { "hisilicon,hix5hd2", NULL, }; @@ -64,7 +64,7 @@ DT_MACHINE_START(HIX5HD2_DT, "Hisilicon HIX5HD2 (Flattened Device Tree)") .dt_compat = hix5hd2_compat, MACHINE_END -static const char *hip04_compat[] __initconst = { +static const char *const hip04_compat[] __initconst = { "hisilicon,hip04-d01", NULL, }; @@ -72,3 +72,13 @@ static const char *hip04_compat[] __initconst = { DT_MACHINE_START(HIP04, "Hisilicon HiP04 (Flattened Device Tree)") .dt_compat = hip04_compat, MACHINE_END + +static const char *const hip01_compat[] __initconst = { + "hisilicon,hip01", + "hisilicon,hip01-ca9x2", + NULL, +}; + +DT_MACHINE_START(HIP01, "Hisilicon HIP01 (Flattened Device Tree)") + .dt_compat = hip01_compat, +MACHINE_END diff --git a/arch/arm/mach-hisi/hotplug.c b/arch/arm/mach-hisi/hotplug.c index 84e6919f68c7..a129aae72602 100644 --- a/arch/arm/mach-hisi/hotplug.c +++ b/arch/arm/mach-hisi/hotplug.c @@ -65,6 +65,9 @@ #define PMC0_CPU1_PMC_ENABLE (1 << 7) #define PMC0_CPU1_POWERDOWN (1 << 3) +#define HIP01_PERI9 0x50 +#define PERI9_CPU1_RESET (1 << 1) + enum { HI3620_CTRL, ERROR_CTRL, @@ -209,6 +212,34 @@ void hix5hd2_set_cpu(int cpu, bool enable) } } +void hip01_set_cpu(int cpu, bool enable) +{ + unsigned int temp; + struct device_node *np; + + if (!ctrl_base) { + np = of_find_compatible_node(NULL, NULL, "hisilicon,hip01-sysctrl"); + if (np) + ctrl_base = of_iomap(np, 0); + else + BUG(); + } + + if (enable) { + /* reset on CPU1 */ + temp = readl_relaxed(ctrl_base + HIP01_PERI9); + temp |= PERI9_CPU1_RESET; + writel_relaxed(temp, ctrl_base + HIP01_PERI9); + + udelay(50); + + /* unreset on CPU1 */ + temp = readl_relaxed(ctrl_base + HIP01_PERI9); + temp &= ~PERI9_CPU1_RESET; + writel_relaxed(temp, ctrl_base + HIP01_PERI9); + } +} + static inline void cpu_enter_lowpower(void) { unsigned int v; diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c index 575dd8285f1f..8880c8e8b296 100644 --- a/arch/arm/mach-hisi/platsmp.c +++ b/arch/arm/mach-hisi/platsmp.c @@ -10,10 +10,12 @@ #include <linux/smp.h> #include <linux/io.h> #include <linux/of_address.h> +#include <linux/delay.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> +#include <asm/mach/map.h> #include "core.h" @@ -96,7 +98,7 @@ struct smp_operations hi3xxx_smp_ops __initdata = { #endif }; -static void __init hix5hd2_smp_prepare_cpus(unsigned int max_cpus) +static void __init hisi_common_smp_prepare_cpus(unsigned int max_cpus) { hisi_enable_scu_a9(); } @@ -116,7 +118,7 @@ static int hix5hd2_boot_secondary(unsigned int cpu, struct task_struct *idle) { phys_addr_t jumpaddr; - jumpaddr = virt_to_phys(hix5hd2_secondary_startup); + jumpaddr = virt_to_phys(hisi_secondary_startup); hix5hd2_set_scu_boot_addr(HIX5HD2_BOOT_ADDRESS, jumpaddr); hix5hd2_set_cpu(cpu, true); arch_send_wakeup_ipi_mask(cpumask_of(cpu)); @@ -125,12 +127,60 @@ static int hix5hd2_boot_secondary(unsigned int cpu, struct task_struct *idle) struct smp_operations hix5hd2_smp_ops __initdata = { - .smp_prepare_cpus = hix5hd2_smp_prepare_cpus, + .smp_prepare_cpus = hisi_common_smp_prepare_cpus, .smp_boot_secondary = hix5hd2_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = hix5hd2_cpu_die, #endif }; + +#define SC_SCTL_REMAP_CLR 0x00000100 +#define HIP01_BOOT_ADDRESS 0x80000000 +#define REG_SC_CTRL 0x000 + +void hip01_set_boot_addr(phys_addr_t start_addr, phys_addr_t jump_addr) +{ + void __iomem *virt; + + virt = phys_to_virt(start_addr); + + writel_relaxed(0xe51ff004, virt); + writel_relaxed(jump_addr, virt + 4); +} + +static int hip01_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + phys_addr_t jumpaddr; + unsigned int remap_reg_value = 0; + struct device_node *node; + + + jumpaddr = virt_to_phys(hisi_secondary_startup); + hip01_set_boot_addr(HIP01_BOOT_ADDRESS, jumpaddr); + + node = of_find_compatible_node(NULL, NULL, "hisilicon,hip01-sysctrl"); + if (WARN_ON(!node)) + return -1; + ctrl_base = of_iomap(node, 0); + + /* set the secondary core boot from DDR */ + remap_reg_value = readl_relaxed(ctrl_base + REG_SC_CTRL); + barrier(); + remap_reg_value |= SC_SCTL_REMAP_CLR; + barrier(); + writel_relaxed(remap_reg_value, ctrl_base + REG_SC_CTRL); + + hip01_set_cpu(cpu, true); + + return 0; +} + +struct smp_operations hip01_smp_ops __initdata = { + .smp_prepare_cpus = hisi_common_smp_prepare_cpus, + .smp_boot_secondary = hip01_boot_secondary, +}; + CPU_METHOD_OF_DECLARE(hi3xxx_smp, "hisilicon,hi3620-smp", &hi3xxx_smp_ops); CPU_METHOD_OF_DECLARE(hix5hd2_smp, "hisilicon,hix5hd2-smp", &hix5hd2_smp_ops); +CPU_METHOD_OF_DECLARE(hip01_smp, "hisilicon,hip01-smp", &hip01_smp_ops); diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index f5ac685a29fc..8d1b10180908 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -32,8 +32,7 @@ ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o -# i.MX6SX reuses i.MX6Q cpuidle driver -obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6q.o +obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6sx.o endif ifdef CONFIG_SND_IMX_SOC diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index 5a75cdc81891..8935bff99fe7 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c @@ -96,15 +96,30 @@ static int clk_gate2_is_enabled(struct clk_hw *hw) { struct clk_gate2 *gate = to_clk_gate2(hw); - if (gate->share_count) - return !!__clk_get_enable_count(hw->clk); - else - return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx); + return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx); +} + +static void clk_gate2_disable_unused(struct clk_hw *hw) +{ + struct clk_gate2 *gate = to_clk_gate2(hw); + unsigned long flags = 0; + u32 reg; + + spin_lock_irqsave(gate->lock, flags); + + if (!gate->share_count || *gate->share_count == 0) { + reg = readl(gate->reg); + reg &= ~(3 << gate->bit_idx); + writel(reg, gate->reg); + } + + spin_unlock_irqrestore(gate->lock, flags); } static struct clk_ops clk_gate2_ops = { .enable = clk_gate2_enable, .disable = clk_gate2_disable, + .disable_unused = clk_gate2_disable_unused, .is_enabled = clk_gate2_is_enabled, }; diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 2daef619d053..d04a430607b8 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -386,7 +386,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6Q_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8); clk[IMX6QDL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10); clk[IMX6QDL_CLK_ESAI_EXTAL] = imx_clk_gate2_shared("esai_extal", "esai_podf", base + 0x6c, 16, &share_count_esai); - clk[IMX6QDL_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ipg", base + 0x6c, 16, &share_count_esai); + clk[IMX6QDL_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ahb", base + 0x6c, 16, &share_count_esai); clk[IMX6QDL_CLK_ESAI_MEM] = imx_clk_gate2_shared("esai_mem", "ahb", base + 0x6c, 16, &share_count_esai); clk[IMX6QDL_CLK_GPT_IPG] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20); clk[IMX6QDL_CLK_GPT_IPG_PER] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22); diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c index 0ad6e5442fd8..641ebc508920 100644 --- a/arch/arm/mach-imx/clk-pllv3.c +++ b/arch/arm/mach-imx/clk-pllv3.c @@ -31,6 +31,7 @@ * @base: base address of PLL registers * @powerup_set: set POWER bit to power up the PLL * @div_mask: mask of divider bits + * @div_shift: shift of divider bits * * IMX PLL clock version 3, found on i.MX6 series. Divider for pllv3 * is actually a multiplier, and always sits at bit 0. @@ -40,6 +41,7 @@ struct clk_pllv3 { void __iomem *base; bool powerup_set; u32 div_mask; + u32 div_shift; }; #define to_clk_pllv3(_hw) container_of(_hw, struct clk_pllv3, hw) @@ -97,7 +99,7 @@ static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct clk_pllv3 *pll = to_clk_pllv3(hw); - u32 div = readl_relaxed(pll->base) & pll->div_mask; + u32 div = (readl_relaxed(pll->base) >> pll->div_shift) & pll->div_mask; return (div == 1) ? parent_rate * 22 : parent_rate * 20; } @@ -125,8 +127,8 @@ static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate, return -EINVAL; val = readl_relaxed(pll->base); - val &= ~pll->div_mask; - val |= div; + val &= ~(pll->div_mask << pll->div_shift); + val |= (div << pll->div_shift); writel_relaxed(val, pll->base); return clk_pllv3_wait_lock(pll); @@ -295,6 +297,8 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, case IMX_PLLV3_SYS: ops = &clk_pllv3_sys_ops; break; + case IMX_PLLV3_USB_VF610: + pll->div_shift = 1; case IMX_PLLV3_USB: ops = &clk_pllv3_ops; pll->powerup_set = true; diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c index 5937ddee1a99..61876ed6e11e 100644 --- a/arch/arm/mach-imx/clk-vf610.c +++ b/arch/arm/mach-imx/clk-vf610.c @@ -172,11 +172,11 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll1", "pll1_bypass_src", PLL1_CTRL, 0x1); clk[VF610_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", PLL2_CTRL, 0x1); - clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", PLL3_CTRL, 0x1); + clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB_VF610, "pll3", "pll3_bypass_src", PLL3_CTRL, 0x2); clk[VF610_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", PLL4_CTRL, 0x7f); clk[VF610_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll5", "pll5_bypass_src", PLL5_CTRL, 0x3); clk[VF610_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_AV, "pll6", "pll6_bypass_src", PLL6_CTRL, 0x7f); - clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", PLL7_CTRL, 0x1); + clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB_VF610, "pll7", "pll7_bypass_src", PLL7_CTRL, 0x2); clk[VF610_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", PLL1_CTRL, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); clk[VF610_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", PLL2_CTRL, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); @@ -267,6 +267,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_UART1] = imx_clk_gate2("uart1", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(8)); clk[VF610_CLK_UART2] = imx_clk_gate2("uart2", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(9)); clk[VF610_CLK_UART3] = imx_clk_gate2("uart3", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(10)); + clk[VF610_CLK_UART4] = imx_clk_gate2("uart4", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(9)); + clk[VF610_CLK_UART5] = imx_clk_gate2("uart5", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(10)); clk[VF610_CLK_I2C0] = imx_clk_gate2("i2c0", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(6)); clk[VF610_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(7)); @@ -380,6 +382,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_DMAMUX2] = imx_clk_gate2("dmamux2", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(1)); clk[VF610_CLK_DMAMUX3] = imx_clk_gate2("dmamux3", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(2)); + clk[VF610_CLK_SNVS] = imx_clk_gate2("snvs-rtc", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(7)); + imx_check_clocks(clk, ARRAY_SIZE(clk)); clk_set_parent(clk[VF610_CLK_QSPI0_SEL], clk[VF610_CLK_PLL1_PFD4]); diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h index 5ef82e2f8fc5..6a07903a28bc 100644 --- a/arch/arm/mach-imx/clk.h +++ b/arch/arm/mach-imx/clk.h @@ -20,6 +20,7 @@ enum imx_pllv3_type { IMX_PLLV3_GENERIC, IMX_PLLV3_SYS, IMX_PLLV3_USB, + IMX_PLLV3_USB_VF610, IMX_PLLV3_AV, IMX_PLLV3_ENET, }; diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index cfcdb623d78f..1028b6c505c4 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -70,6 +70,10 @@ void imx_set_soc_revision(unsigned int rev); unsigned int imx_get_soc_revision(void); void imx_init_revision_from_anatop(void); struct device *imx_soc_device_init(void); +void imx6_enable_rbc(bool enable); +void imx_gpc_set_arm_power_in_lpm(bool power_off); +void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw); +void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw); enum mxc_cpu_pwr_mode { WAIT_CLOCKED, /* wfi only */ diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c new file mode 100644 index 000000000000..5a36722b089d --- /dev/null +++ b/arch/arm/mach-imx/cpuidle-imx6sx.c @@ -0,0 +1,105 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/cpuidle.h> +#include <linux/cpu_pm.h> +#include <linux/module.h> +#include <asm/cpuidle.h> +#include <asm/proc-fns.h> +#include <asm/suspend.h> + +#include "common.h" +#include "cpuidle.h" + +static int imx6sx_idle_finish(unsigned long val) +{ + cpu_do_idle(); + + return 0; +} + +static int imx6sx_enter_wait(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + imx6q_set_lpm(WAIT_UNCLOCKED); + + switch (index) { + case 1: + cpu_do_idle(); + break; + case 2: + imx6_enable_rbc(true); + imx_gpc_set_arm_power_in_lpm(true); + imx_set_cpu_jump(0, v7_cpu_resume); + /* Need to notify there is a cpu pm operation. */ + cpu_pm_enter(); + cpu_cluster_pm_enter(); + + cpu_suspend(0, imx6sx_idle_finish); + + cpu_cluster_pm_exit(); + cpu_pm_exit(); + imx_gpc_set_arm_power_in_lpm(false); + imx6_enable_rbc(false); + break; + default: + break; + } + + imx6q_set_lpm(WAIT_CLOCKED); + + return index; +} + +static struct cpuidle_driver imx6sx_cpuidle_driver = { + .name = "imx6sx_cpuidle", + .owner = THIS_MODULE, + .states = { + /* WFI */ + ARM_CPUIDLE_WFI_STATE, + /* WAIT */ + { + .exit_latency = 50, + .target_residency = 75, + .flags = CPUIDLE_FLAG_TIMER_STOP, + .enter = imx6sx_enter_wait, + .name = "WAIT", + .desc = "Clock off", + }, + /* WAIT + ARM power off */ + { + /* + * ARM gating 31us * 5 + RBC clear 65us + * and some margin for SW execution, here set it + * to 300us. + */ + .exit_latency = 300, + .target_residency = 500, + .enter = imx6sx_enter_wait, + .name = "LOW-POWER-IDLE", + .desc = "ARM power off", + }, + }, + .state_count = 3, + .safe_state_index = 0, +}; + +int __init imx6sx_cpuidle_init(void) +{ + imx6_enable_rbc(false); + /* + * set ARM power up/down timing to the fastest, + * sw2iso and sw can be set to one 32K cycle = 31us + * except for power up sw2iso which need to be + * larger than LDO ramp up time. + */ + imx_gpc_set_arm_power_up_timing(2, 1); + imx_gpc_set_arm_power_down_timing(1, 1); + + return cpuidle_register(&imx6sx_cpuidle_driver, NULL); +} diff --git a/arch/arm/mach-imx/cpuidle.h b/arch/arm/mach-imx/cpuidle.h index 24e33670417c..f9140128ba05 100644 --- a/arch/arm/mach-imx/cpuidle.h +++ b/arch/arm/mach-imx/cpuidle.h @@ -14,6 +14,7 @@ extern int imx5_cpuidle_init(void); extern int imx6q_cpuidle_init(void); extern int imx6sl_cpuidle_init(void); +extern int imx6sx_cpuidle_init(void); #else static inline int imx5_cpuidle_init(void) { @@ -27,4 +28,8 @@ static inline int imx6sl_cpuidle_init(void) { return 0; } +static inline int imx6sx_cpuidle_init(void) +{ + return 0; +} #endif diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 5f3602ec74fa..745caa18ab2c 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -20,6 +20,10 @@ #define GPC_IMR1 0x008 #define GPC_PGC_CPU_PDN 0x2a0 +#define GPC_PGC_CPU_PUPSCR 0x2a4 +#define GPC_PGC_CPU_PDNSCR 0x2a8 +#define GPC_PGC_SW2ISO_SHIFT 0x8 +#define GPC_PGC_SW_SHIFT 0x0 #define IMR_NUM 4 @@ -27,6 +31,23 @@ static void __iomem *gpc_base; static u32 gpc_wake_irqs[IMR_NUM]; static u32 gpc_saved_imrs[IMR_NUM]; +void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw) +{ + writel_relaxed((sw2iso << GPC_PGC_SW2ISO_SHIFT) | + (sw << GPC_PGC_SW_SHIFT), gpc_base + GPC_PGC_CPU_PUPSCR); +} + +void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw) +{ + writel_relaxed((sw2iso << GPC_PGC_SW2ISO_SHIFT) | + (sw << GPC_PGC_SW_SHIFT), gpc_base + GPC_PGC_CPU_PDNSCR); +} + +void imx_gpc_set_arm_power_in_lpm(bool power_off) +{ + writel_relaxed(power_off, gpc_base + GPC_PGC_CPU_PDN); +} + void imx_gpc_pre_suspend(bool arm_power_off) { void __iomem *reg_imr1 = gpc_base + GPC_IMR1; @@ -34,7 +55,7 @@ void imx_gpc_pre_suspend(bool arm_power_off) /* Tell GPC to power off ARM core when suspend */ if (arm_power_off) - writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN); + imx_gpc_set_arm_power_in_lpm(arm_power_off); for (i = 0; i < IMR_NUM; i++) { gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4); @@ -48,7 +69,7 @@ void imx_gpc_post_resume(void) int i; /* Keep ARM core powered on for other low-power modes */ - writel_relaxed(0x0, gpc_base + GPC_PGC_CPU_PDN); + imx_gpc_set_arm_power_in_lpm(false); for (i = 0; i < IMR_NUM; i++) writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4); diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 5057d61298b7..9de3412af406 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -211,8 +211,9 @@ static void __init imx6q_1588_init(void) * set bit IOMUXC_GPR1[21]. Or the PTP clock must be from pad * (external OSC), and we need to clear the bit. */ - clksel = ptp_clk == enet_ref ? IMX6Q_GPR1_ENET_CLK_SEL_ANATOP : - IMX6Q_GPR1_ENET_CLK_SEL_PAD; + clksel = clk_is_match(ptp_clk, enet_ref) ? + IMX6Q_GPR1_ENET_CLK_SEL_ANATOP : + IMX6Q_GPR1_ENET_CLK_SEL_PAD; gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); if (!IS_ERR(gpr)) regmap_update_bits(gpr, IOMUXC_GPR1, @@ -329,7 +330,7 @@ static void __init imx6q_opp_check_speed_grading(struct device *cpu_dev) if (dev_pm_opp_disable(cpu_dev, 852000000)) pr_warn("failed to disable 852 MHz OPP\n"); } - + iounmap(base); put_node: of_node_put(np); } diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c index 7a96c6577234..66988eb6a3a4 100644 --- a/arch/arm/mach-imx/mach-imx6sx.c +++ b/arch/arm/mach-imx/mach-imx6sx.c @@ -90,7 +90,7 @@ static void __init imx6sx_init_irq(void) static void __init imx6sx_init_late(void) { - imx6q_cpuidle_init(); + imx6sx_cpuidle_init(); if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0); diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c index c11ab6a1dc87..2e7c75b66fe0 100644 --- a/arch/arm/mach-imx/mach-vf610.c +++ b/arch/arm/mach-imx/mach-vf610.c @@ -13,11 +13,14 @@ #include <asm/hardware/cache-l2x0.h> static const char * const vf610_dt_compat[] __initconst = { + "fsl,vf500", + "fsl,vf510", + "fsl,vf600", "fsl,vf610", NULL, }; -DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)") +DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF5xx/VF6xx (Device Tree)") .l2c_aux_val = 0, .l2c_aux_mask = ~0, .dt_compat = vf610_dt_compat, diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c index a377f95033ae..0411f0664c15 100644 --- a/arch/arm/mach-imx/mmdc.c +++ b/arch/arm/mach-imx/mmdc.c @@ -68,7 +68,7 @@ int imx_mmdc_get_ddr_type(void) return ddr_type; } -static struct of_device_id imx_mmdc_dt_ids[] = { +static const struct of_device_id imx_mmdc_dt_ids[] = { { .compatible = "fsl,imx6q-mmdc", }, { /* sentinel */ } }; diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 5d2c1bd5f5ef..46fd695203c7 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -205,7 +205,7 @@ void imx6q_set_int_mem_clk_lpm(bool enable) writel_relaxed(val, ccm_base + CGPR); } -static void imx6q_enable_rbc(bool enable) +void imx6_enable_rbc(bool enable) { u32 val; @@ -359,17 +359,16 @@ static int imx6q_pm_enter(suspend_state_t state) * RBC setting, so we do NOT need to do that here. */ if (!imx6_suspend_in_ocram_fn) - imx6q_enable_rbc(true); + imx6_enable_rbc(true); imx_gpc_pre_suspend(true); imx_anatop_pre_suspend(); - imx_set_cpu_jump(0, v7_cpu_resume); /* Zzz ... */ cpu_suspend(0, imx6q_suspend_finish); if (cpu_is_imx6q() || cpu_is_imx6dl()) imx_smp_prepare(); imx_anatop_post_resume(); imx_gpc_post_resume(); - imx6q_enable_rbc(false); + imx6_enable_rbc(false); imx6q_enable_wb(false); imx6q_set_int_mem_clk_lpm(true); imx6q_set_lpm(WAIT_CLOCKED); diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index c186a17c2cff..2565f0e7b5cf 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -356,7 +356,6 @@ static u64 pre_mem_pci_sz; * 7:2 register number * */ -static DEFINE_RAW_SPINLOCK(v3_lock); #undef V3_LB_BASE_PREFETCH #define V3_LB_BASE_PREFETCH 0 @@ -457,67 +456,21 @@ static void v3_close_config_window(void) static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val) { - void __iomem *addr; - unsigned long flags; - u32 v; - - raw_spin_lock_irqsave(&v3_lock, flags); - addr = v3_open_config_window(bus, devfn, where); - - switch (size) { - case 1: - v = __raw_readb(addr); - break; - - case 2: - v = __raw_readw(addr); - break; - - default: - v = __raw_readl(addr); - break; - } - + int ret = pci_generic_config_read(bus, devfn, where, size, val); v3_close_config_window(); - raw_spin_unlock_irqrestore(&v3_lock, flags); - - *val = v; - return PCIBIOS_SUCCESSFUL; + return ret; } static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { - void __iomem *addr; - unsigned long flags; - - raw_spin_lock_irqsave(&v3_lock, flags); - addr = v3_open_config_window(bus, devfn, where); - - switch (size) { - case 1: - __raw_writeb((u8)val, addr); - __raw_readb(addr); - break; - - case 2: - __raw_writew((u16)val, addr); - __raw_readw(addr); - break; - - case 4: - __raw_writel(val, addr); - __raw_readl(addr); - break; - } - + int ret = pci_generic_config_write(bus, devfn, where, size, val); v3_close_config_window(); - raw_spin_unlock_irqrestore(&v3_lock, flags); - - return PCIBIOS_SUCCESSFUL; + return ret; } static struct pci_ops pci_v3_ops = { + .map_bus = v3_open_config_window, .read = v3_read_config, .write = v3_write_config, }; @@ -658,7 +611,6 @@ static int __init pci_v3_setup(int nr, struct pci_sys_data *sys) */ static void __init pci_v3_preinit(void) { - unsigned long flags; unsigned int temp; phys_addr_t io_address = pci_pio_to_address(io_mem.start); @@ -672,8 +624,6 @@ static void __init pci_v3_preinit(void) hook_fault_code(8, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch"); hook_fault_code(10, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch"); - raw_spin_lock_irqsave(&v3_lock, flags); - /* * Unlock V3 registers, but only if they were previously locked. */ @@ -736,8 +686,6 @@ static void __init pci_v3_preinit(void) v3_writew(V3_LB_CFG, v3_readw(V3_LB_CFG) | (1 << 10)); v3_writeb(V3_LB_IMASK, 0x28); __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET); - - raw_spin_unlock_irqrestore(&v3_lock, flags); } static void __init pci_v3_postinit(void) diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h index 6a722860e34d..b02439019963 100644 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -245,8 +245,10 @@ static inline void outb(u8 value, u32 addr) } #define outsb outsb -static inline void outsb(u32 io_addr, const u8 *vaddr, u32 count) +static inline void outsb(u32 io_addr, const void *p, u32 count) { + const u8 *vaddr = p; + while (count--) outb(*vaddr++, io_addr); } @@ -262,8 +264,9 @@ static inline void outw(u16 value, u32 addr) } #define outsw outsw -static inline void outsw(u32 io_addr, const u16 *vaddr, u32 count) +static inline void outsw(u32 io_addr, const void *p, u32 count) { + const u16 *vaddr = p; while (count--) outw(cpu_to_le16(*vaddr++), io_addr); } @@ -275,8 +278,9 @@ static inline void outl(u32 value, u32 addr) } #define outsl outsl -static inline void outsl(u32 io_addr, const u32 *vaddr, u32 count) +static inline void outsl(u32 io_addr, const void *p, u32 count) { + const u32 *vaddr = p; while (count--) outl(cpu_to_le32(*vaddr++), io_addr); } @@ -294,8 +298,9 @@ static inline u8 inb(u32 addr) } #define insb insb -static inline void insb(u32 io_addr, u8 *vaddr, u32 count) +static inline void insb(u32 io_addr, void *p, u32 count) { + u8 *vaddr = p; while (count--) *vaddr++ = inb(io_addr); } @@ -313,8 +318,9 @@ static inline u16 inw(u32 addr) } #define insw insw -static inline void insw(u32 io_addr, u16 *vaddr, u32 count) +static inline void insw(u32 io_addr, void *p, u32 count) { + u16 *vaddr = p; while (count--) *vaddr++ = le16_to_cpu(inw(io_addr)); } @@ -330,8 +336,9 @@ static inline u32 inl(u32 addr) } #define insl insl -static inline void insl(u32 io_addr, u32 *vaddr, u32 count) +static inline void insl(u32 io_addr, void *p, u32 count) { + u32 *vaddr = p; while (count--) *vaddr++ = le32_to_cpu(inl(io_addr)); } diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index 7f352de26099..06620875813a 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -103,7 +103,7 @@ static void __init keystone_init_meminfo(void) pr_info("Switching to high address space at 0x%llx\n", (u64)offset); } -static const char *keystone_match[] __initconst = { +static const char *const keystone_match[] __initconst = { "ti,keystone", NULL, }; diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c index ef6041e7e675..41bebfd296dc 100644 --- a/arch/arm/mach-keystone/pm_domain.c +++ b/arch/arm/mach-keystone/pm_domain.c @@ -61,7 +61,7 @@ static struct pm_clk_notifier_block platform_domain_notifier = { .pm_domain = &keystone_pm_domain, }; -static struct of_device_id of_keystone_table[] = { +static const struct of_device_id of_keystone_table[] = { {.compatible = "ti,keystone"}, { /* end of list */ }, }; diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c index bb18193b4bac..c1bc4c3716ed 100644 --- a/arch/arm/mach-ks8695/pci.c +++ b/arch/arm/mach-ks8695/pci.c @@ -38,8 +38,6 @@ static int pci_dbg; -static int pci_cfg_dbg; - static void ks8695_pci_setupconfig(unsigned int bus_nr, unsigned int devfn, unsigned int where) { @@ -59,75 +57,11 @@ static void ks8695_pci_setupconfig(unsigned int bus_nr, unsigned int devfn, unsi } } - -/* - * The KS8695 datasheet prohibits anything other than 32bit accesses - * to the IO registers, so all our configuration must be done with - * 32bit operations, and the correct bit masking and shifting. - */ - -static int ks8695_pci_readconfig(struct pci_bus *bus, - unsigned int devfn, int where, int size, u32 *value) -{ - ks8695_pci_setupconfig(bus->number, devfn, where); - - *value = __raw_readl(KS8695_PCI_VA + KS8695_PBCD); - - switch (size) { - case 4: - break; - case 2: - *value = *value >> ((where & 2) * 8); - *value &= 0xffff; - break; - case 1: - *value = *value >> ((where & 3) * 8); - *value &= 0xff; - break; - } - - if (pci_cfg_dbg) { - printk("read: %d,%08x,%02x,%d: %08x (%08x)\n", - bus->number, devfn, where, size, *value, - __raw_readl(KS8695_PCI_VA + KS8695_PBCD)); - } - - return PCIBIOS_SUCCESSFUL; -} - -static int ks8695_pci_writeconfig(struct pci_bus *bus, - unsigned int devfn, int where, int size, u32 value) +static void __iomem *ks8695_pci_map_bus(struct pci_bus *bus, unsigned int devfn, + int where) { - unsigned long tmp; - - if (pci_cfg_dbg) { - printk("write: %d,%08x,%02x,%d: %08x\n", - bus->number, devfn, where, size, value); - } - ks8695_pci_setupconfig(bus->number, devfn, where); - - switch (size) { - case 4: - __raw_writel(value, KS8695_PCI_VA + KS8695_PBCD); - break; - case 2: - tmp = __raw_readl(KS8695_PCI_VA + KS8695_PBCD); - tmp &= ~(0xffff << ((where & 2) * 8)); - tmp |= value << ((where & 2) * 8); - - __raw_writel(tmp, KS8695_PCI_VA + KS8695_PBCD); - break; - case 1: - tmp = __raw_readl(KS8695_PCI_VA + KS8695_PBCD); - tmp &= ~(0xff << ((where & 3) * 8)); - tmp |= value << ((where & 3) * 8); - - __raw_writel(tmp, KS8695_PCI_VA + KS8695_PBCD); - break; - } - - return PCIBIOS_SUCCESSFUL; + return KS8695_PCI_VA + KS8695_PBCD; } static void ks8695_local_writeconfig(int where, u32 value) @@ -137,8 +71,9 @@ static void ks8695_local_writeconfig(int where, u32 value) } static struct pci_ops ks8695_pci_ops = { - .read = ks8695_pci_readconfig, - .write = ks8695_pci_writeconfig, + .map_bus = ks8695_pci_map_bus, + .read = pci_generic_config_read32, + .write = pci_generic_config_write32, }; static struct resource pci_mem = { diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig index f73f588f649c..f7e463ca0287 100644 --- a/arch/arm/mach-mediatek/Kconfig +++ b/arch/arm/mach-mediatek/Kconfig @@ -1,6 +1,26 @@ -config ARCH_MEDIATEK +menuconfig ARCH_MEDIATEK bool "Mediatek MT65xx & MT81xx SoC" if ARCH_MULTI_V7 select ARM_GIC select MTK_TIMER help Support for Mediatek MT65xx & MT81xx SoCs + +if ARCH_MEDIATEK + +config MACH_MT6589 + bool "MediaTek MT6589 SoCs support" + default ARCH_MEDIATEK + +config MACH_MT6592 + bool "MediaTek MT6592 SoCs support" + default ARCH_MEDIATEK + +config MACH_MT8127 + bool "MediaTek MT8127 SoCs support" + default ARCH_MEDIATEK + +config MACH_MT8135 + bool "MediaTek MT8135 SoCs support" + default ARCH_MEDIATEK + +endif diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index 2756351dbb35..10bfa03e58d4 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -213,7 +213,7 @@ void __init timer_init(int irq) } #ifdef CONFIG_OF -static struct of_device_id mmp_timer_dt_ids[] = { +static const struct of_device_id mmp_timer_dt_ids[] = { { .compatible = "mrvl,mmp-timer", }, {} }; diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index 61bfe584a9d7..fc832040c6e9 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -20,6 +20,7 @@ #include <linux/input.h> #include <linux/io.h> #include <linux/delay.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -46,15 +47,20 @@ static struct resource smc91x_resources[] = { [1] = { .start = MSM_GPIO_TO_INT(49), .end = MSM_GPIO_TO_INT(49), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; +static struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, +}; + static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, + .dev.platform_data = &smc91x_platdata, }; static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 4c748616ef47..10016a3bc698 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -22,6 +22,7 @@ #include <linux/usb/msm_hsusb.h> #include <linux/err.h> #include <linux/clkdev.h> +#include <linux/smc91x.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -49,15 +50,20 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; +static struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, +}; + static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, + .dev.platform_data = &smc91x_platdata, }; static int __init msm_init_smc91x(void) diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index ccef8806bb58..e46e9ea1e187 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -33,6 +33,7 @@ #include <asm/smp_plat.h> #include <asm/cacheflush.h> #include <asm/mach/map.h> +#include <asm/dma-mapping.h> #include "coherency.h" #include "mvebu-soc-id.h" @@ -50,7 +51,7 @@ enum { COHERENCY_FABRIC_TYPE_ARMADA_380, }; -static struct of_device_id of_coherency_table[] = { +static const struct of_device_id of_coherency_table[] = { {.compatible = "marvell,coherency-fabric", .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_370_XP }, {.compatible = "marvell,armada-375-coherency-fabric", @@ -76,54 +77,6 @@ int set_cpu_coherent(void) return ll_enable_coherency(); } -static inline void mvebu_hwcc_sync_io_barrier(void) -{ - writel(0x1, coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET); - while (readl(coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET) & 0x1); -} - -static dma_addr_t mvebu_hwcc_dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction dir, - struct dma_attrs *attrs) -{ - if (dir != DMA_TO_DEVICE) - mvebu_hwcc_sync_io_barrier(); - return pfn_to_dma(dev, page_to_pfn(page)) + offset; -} - - -static void mvebu_hwcc_dma_unmap_page(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction dir, - struct dma_attrs *attrs) -{ - if (dir != DMA_TO_DEVICE) - mvebu_hwcc_sync_io_barrier(); -} - -static void mvebu_hwcc_dma_sync(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction dir) -{ - if (dir != DMA_TO_DEVICE) - mvebu_hwcc_sync_io_barrier(); -} - -static struct dma_map_ops mvebu_hwcc_dma_ops = { - .alloc = arm_dma_alloc, - .free = arm_dma_free, - .mmap = arm_dma_mmap, - .map_page = mvebu_hwcc_dma_map_page, - .unmap_page = mvebu_hwcc_dma_unmap_page, - .get_sgtable = arm_dma_get_sgtable, - .map_sg = arm_dma_map_sg, - .unmap_sg = arm_dma_unmap_sg, - .sync_single_for_cpu = mvebu_hwcc_dma_sync, - .sync_single_for_device = mvebu_hwcc_dma_sync, - .sync_sg_for_cpu = arm_dma_sync_sg_for_cpu, - .sync_sg_for_device = arm_dma_sync_sg_for_device, - .set_dma_mask = arm_dma_set_mask, -}; - static int mvebu_hwcc_notifier(struct notifier_block *nb, unsigned long event, void *__dev) { @@ -131,7 +84,7 @@ static int mvebu_hwcc_notifier(struct notifier_block *nb, if (event != BUS_NOTIFY_ADD_DEVICE) return NOTIFY_DONE; - set_dma_ops(dev, &mvebu_hwcc_dma_ops); + set_dma_ops(dev, &arm_coherent_dma_ops); return NOTIFY_OK; } @@ -253,14 +206,9 @@ static int coherency_type(void) return type; } -/* - * As a precaution, we currently completely disable hardware I/O - * coherency, until enough testing is done with automatic I/O - * synchronization barriers to validate that it is a proper solution. - */ int coherency_available(void) { - return false; + return coherency_type() != COHERENCY_FABRIC_TYPE_NONE; } int __init coherency_init(void) diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.h b/arch/arm/mach-mvebu/mvebu-soc-id.h index c16bb68ca81f..e124a0b82a3e 100644 --- a/arch/arm/mach-mvebu/mvebu-soc-id.h +++ b/arch/arm/mach-mvebu/mvebu-soc-id.h @@ -20,10 +20,28 @@ #define MV78XX0_A0_REV 0x1 #define MV78XX0_B0_REV 0x2 +/* Amada 370 ID */ +#define ARMADA_370_DEV_ID 0x6710 + +/* Amada 370 Revision */ +#define ARMADA_370_A1_REV 0x1 + +/* Armada 375 ID */ +#define ARMADA_375_DEV_ID 0x6720 + /* Armada 375 */ #define ARMADA_375_Z1_REV 0x0 #define ARMADA_375_A0_REV 0x3 +/* Armada 38x ID */ +#define ARMADA_380_DEV_ID 0x6810 +#define ARMADA_385_DEV_ID 0x6820 +#define ARMADA_388_DEV_ID 0x6828 + +/* Armada 38x Revision */ +#define ARMADA_38x_Z1_REV 0x0 +#define ARMADA_38x_A0_REV 0x4 + #ifdef CONFIG_ARCH_MVEBU int mvebu_get_soc_id(u32 *dev, u32 *rev); #else diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index d8ab605a44fa..8b9f5e202ccf 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -104,7 +104,7 @@ static void __iomem *pmsu_mp_base; static void *mvebu_cpu_resume; -static struct of_device_id of_pmsu_table[] = { +static const struct of_device_id of_pmsu_table[] = { { .compatible = "marvell,armada-370-pmsu", }, { .compatible = "marvell,armada-370-xp-pmsu", }, { .compatible = "marvell,armada-380-pmsu", }, diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c index a068cb5c2ce8..c6c132acd7a6 100644 --- a/arch/arm/mach-mvebu/system-controller.c +++ b/arch/arm/mach-mvebu/system-controller.c @@ -126,7 +126,7 @@ int mvebu_system_controller_get_soc_id(u32 *dev, u32 *rev) return -ENODEV; } -#ifdef CONFIG_SMP +#if defined(CONFIG_SMP) && defined(CONFIG_MACH_MVEBU_V7) void mvebu_armada375_smp_wa_init(void) { u32 dev, rev; diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c index 3d24ebf12095..3445a5686805 100644 --- a/arch/arm/mach-nspire/nspire.c +++ b/arch/arm/mach-nspire/nspire.c @@ -27,7 +27,7 @@ #include "mmio.h" #include "clcd.h" -static const char *nspire_dt_match[] __initconst = { +static const char *const nspire_dt_match[] __initconst = { "ti,nspire", "ti,nspire-cx", "ti,nspire-tp", diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S deleted file mode 100644 index 5c1a26c9f490..000000000000 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ /dev/null @@ -1,101 +0,0 @@ -/* arch/arm/mach-omap1/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <linux/serial_reg.h> - -#include "serial.h" - - .pushsection .data -omap_uart_phys: .word 0x0 -omap_uart_virt: .word 0x0 - .popsection - - /* - * Note that this code won't work if the bootloader passes - * a wrong machine ID number in r1. To debug, just hardcode - * the desired UART phys and virt addresses temporarily into - * the omap_uart_phys and omap_uart_virt above. - */ - .macro addruart, rp, rv, tmp - - /* Use omap_uart_phys/virt if already configured */ -9: adr \rp, 99f @ get effective addr of 99f - ldr \rv, [\rp] @ get absolute addr of 99f - sub \rv, \rv, \rp @ offset between the two - ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys - sub \tmp, \rp, \rv @ make it effective - ldr \rp, [\tmp, #0] @ omap_uart_phys - ldr \rv, [\tmp, #4] @ omap_uart_virt - cmp \rp, #0 @ is port configured? - cmpne \rv, #0 - bne 100f @ already configured - - /* Check the debug UART configuration set in uncompress.h */ - and \rp, pc, #0xff000000 - ldr \rv, =OMAP_UART_INFO_OFS - ldr \rp, [\rp, \rv] - - /* Select the UART to use based on the UART1 scratchpad value */ -10: cmp \rp, #0 @ no port configured? - beq 11f @ if none, try to use UART1 - cmp \rp, #OMAP1UART1 - beq 11f @ configure OMAP1UART1 - cmp \rp, #OMAP1UART2 - beq 12f @ configure OMAP1UART2 - cmp \rp, #OMAP1UART3 - beq 13f @ configure OMAP2UART3 - - /* Configure the UART offset from the phys/virt base */ -11: mov \rp, #0x00fb0000 @ OMAP1UART1 - b 98f -12: mov \rp, #0x00fb0000 @ OMAP1UART1 - orr \rp, \rp, #0x00000800 @ OMAP1UART2 - b 98f -13: mov \rp, #0x00fb0000 @ OMAP1UART1 - orr \rp, \rp, #0x00000800 @ OMAP1UART2 - orr \rp, \rp, #0x00009000 @ OMAP1UART3 - - /* Store both phys and virt address for the uart */ -98: add \rp, \rp, #0xff000000 @ phys base - str \rp, [\tmp, #0] @ omap_uart_phys - sub \rp, \rp, #0xff000000 @ phys base - add \rp, \rp, #0xfe000000 @ virt base - str \rp, [\tmp, #4] @ omap_uart_virt - b 9b - - .align -99: .word . - .word omap_uart_phys - .ltorg - -100: - .endm - - .macro senduart,rd,rx - strb \rd, [\rx] - .endm - - .macro busyuart,rd,rx -1001: ldrb \rd, [\rx, #(UART_LSR << OMAP_PORT_SHIFT)] - and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE) - teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE) - beq 1002f - ldrb \rd, [\rx, #(UART_LSR << OMAP7XX_PORT_SHIFT)] - and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE) - teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE) - bne 1001b -1002: - .endm - - .macro waituart,rd,rx - .endm diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 122ef67939a2..a8a533df24e1 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -64,11 +64,6 @@ u32 omap_irq_flags; static unsigned int irq_bank_count; static struct omap_irq_bank *irq_banks; -static inline unsigned int irq_bank_readl(int bank, int offset) -{ - return omap_readl(irq_banks[bank].base_reg + offset); -} - static inline void irq_bank_writel(unsigned long value, int bank, int offset) { omap_writel(value, irq_banks[bank].base_reg + offset); diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 107e7ab3edba..36bf174b3fac 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -91,11 +91,6 @@ static inline void omap_32k_timer_write(int val, int reg) omap_writew(val, OMAP1_32K_TIMER_BASE + reg); } -static inline unsigned long omap_32k_timer_read(int reg) -{ - return omap_readl(OMAP1_32K_TIMER_BASE + reg) & 0xffffff; -} - static inline void omap_32k_timer_start(unsigned long load_val) { if (!load_val) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 6ab656cc4f16..2b8e47788062 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -217,12 +217,6 @@ config MACH_OMAP3517EVM bool "OMAP3517/ AM3517 EVM board" depends on ARCH_OMAP3 default y - select OMAP_PACKAGE_CBB - -config MACH_CRANEBOARD - bool "AM3517/05 CRANE board" - depends on ARCH_OMAP3 - select OMAP_PACKAGE_CBB config MACH_OMAP3_PANDORA bool "OMAP3 Pandora" @@ -263,12 +257,6 @@ config MACH_CM_T35 select MACH_CM_T3730 select OMAP_PACKAGE_CUS -config MACH_CM_T3517 - bool "CompuLab CM-T3517 module" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - config MACH_CM_T3730 bool diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 5d27dfdef66b..b83f18fcec9b 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -58,6 +58,7 @@ AFLAGS_sram34xx.o :=-Wa,-march=armv7-a # Restart code (OMAP4/5 currently in omap4-common.c) obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o obj-$(CONFIG_SOC_OMAP2430) += omap2-restart.o +obj-$(CONFIG_SOC_TI81XX) += ti81xx-restart.o obj-$(CONFIG_SOC_AM33XX) += am33xx-restart.o obj-$(CONFIG_SOC_AM43XX) += omap4-restart.o obj-$(CONFIG_ARCH_OMAP3) += omap3-restart.o @@ -120,6 +121,7 @@ obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common) obj-$(CONFIG_SOC_DRA7XX) += $(omap-prcm-4-5-common) am33xx-43xx-prcm-common += prm33xx.o cm33xx.o +obj-$(CONFIG_SOC_TI81XX) += $(am33xx-43xx-prcm-common) obj-$(CONFIG_SOC_AM33XX) += $(am33xx-43xx-prcm-common) obj-$(CONFIG_SOC_AM43XX) += $(omap-prcm-4-5-common) \ $(am33xx-43xx-prcm-common) @@ -170,6 +172,8 @@ obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common) obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common) obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o +obj-$(CONFIG_SOC_TI81XX) += $(clockdomain-common) +obj-$(CONFIG_SOC_TI81XX) += clockdomains81xx_data.o obj-$(CONFIG_SOC_AM43XX) += $(clockdomain-common) obj-$(CONFIG_SOC_AM43XX) += clockdomains43xx_data.o obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common) @@ -181,13 +185,12 @@ obj-$(CONFIG_SOC_DRA7XX) += clockdomains7xx_data.o obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o -obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_apll.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o obj-$(CONFIG_SOC_OMAP2430) += clock2430.o obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o -obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o cclock3xxx_data.o +obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o @@ -223,6 +226,7 @@ obj-$(CONFIG_SOC_AM33XX) += omap_hwmod_33xx_43xx_ipblock_data.o obj-$(CONFIG_SOC_AM43XX) += omap_hwmod_43xx_data.o obj-$(CONFIG_SOC_AM43XX) += omap_hwmod_33xx_43xx_interconnect_data.o obj-$(CONFIG_SOC_AM43XX) += omap_hwmod_33xx_43xx_ipblock_data.o +obj-$(CONFIG_SOC_TI81XX) += omap_hwmod_81xx_data.o obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o obj-$(CONFIG_SOC_OMAP5) += omap_hwmod_54xx_data.o obj-$(CONFIG_SOC_DRA7XX) += omap_hwmod_7xx_data.o @@ -250,13 +254,8 @@ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o -obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o -obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o - -obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o - obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o # Platform specific device init code @@ -286,7 +285,4 @@ ifneq ($(CONFIG_HWSPINLOCK_OMAP),) obj-y += hwspinlock.o endif -emac-$(CONFIG_TI_DAVINCI_EMAC) := am35xx-emac.o -obj-y += $(emac-m) $(emac-y) - obj-y += common-board-devices.o twl-common.o dss-common.o diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c deleted file mode 100644 index 6a6935caac1e..000000000000 --- a/arch/arm/mach-omap2/am35xx-emac.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * Copyright (C) 2011 Ilya Yanok, Emcraft Systems - * - * Based on mach-omap2/board-am3517evm.c - * Copyright (C) 2009 Texas Instruments Incorporated - * Author: Ranjith Lohithakshan <ranjithl@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * published by the Free Software Foundation. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, - * whether express or implied; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ - -#include <linux/err.h> -#include <linux/davinci_emac.h> -#include "omap_device.h" -#include "am35xx.h" -#include "control.h" -#include "am35xx-emac.h" - -static void am35xx_enable_emac_int(void) -{ - u32 v; - - v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); - v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR | - AM35XX_CPGMAC_C0_MISC_PULSE_CLR | AM35XX_CPGMAC_C0_RX_THRESH_CLR); - omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR); - omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */ -} - -static void am35xx_disable_emac_int(void) -{ - u32 v; - - v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); - v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR); - omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR); - omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */ -} - -static struct emac_platform_data am35xx_emac_pdata = { - .ctrl_reg_offset = AM35XX_EMAC_CNTRL_OFFSET, - .ctrl_mod_reg_offset = AM35XX_EMAC_CNTRL_MOD_OFFSET, - .ctrl_ram_offset = AM35XX_EMAC_CNTRL_RAM_OFFSET, - .ctrl_ram_size = AM35XX_EMAC_CNTRL_RAM_SIZE, - .hw_ram_addr = AM35XX_EMAC_HW_RAM_ADDR, - .version = EMAC_VERSION_2, - .interrupt_enable = am35xx_enable_emac_int, - .interrupt_disable = am35xx_disable_emac_int, -}; - -static struct mdio_platform_data am35xx_mdio_pdata; - -static int __init omap_davinci_emac_dev_init(struct omap_hwmod *oh, - void *pdata, int pdata_len) -{ - struct platform_device *pdev; - - pdev = omap_device_build(oh->class->name, 0, oh, pdata, pdata_len); - if (IS_ERR(pdev)) { - WARN(1, "Can't build omap_device for %s:%s.\n", - oh->class->name, oh->name); - return PTR_ERR(pdev); - } - - return 0; -} - -void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) -{ - struct omap_hwmod *oh; - u32 v; - int ret; - - oh = omap_hwmod_lookup("davinci_mdio"); - if (!oh) { - pr_err("Could not find davinci_mdio hwmod\n"); - return; - } - - am35xx_mdio_pdata.bus_freq = mdio_bus_freq; - - ret = omap_davinci_emac_dev_init(oh, &am35xx_mdio_pdata, - sizeof(am35xx_mdio_pdata)); - if (ret) { - pr_err("Could not build davinci_mdio hwmod device\n"); - return; - } - - oh = omap_hwmod_lookup("davinci_emac"); - if (!oh) { - pr_err("Could not find davinci_emac hwmod\n"); - return; - } - - am35xx_emac_pdata.rmii_en = rmii_en; - - ret = omap_davinci_emac_dev_init(oh, &am35xx_emac_pdata, - sizeof(am35xx_emac_pdata)); - if (ret) { - pr_err("Could not build davinci_emac hwmod device\n"); - return; - } - - v = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); - v &= ~AM35XX_CPGMACSS_SW_RST; - omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET); - omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */ -} diff --git a/arch/arm/mach-omap2/am35xx-emac.h b/arch/arm/mach-omap2/am35xx-emac.h deleted file mode 100644 index 15c6f9ce59a2..000000000000 --- a/arch/arm/mach-omap2/am35xx-emac.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (C) 2011 Ilya Yanok, Emcraft Systems - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define AM35XX_DEFAULT_MDIO_FREQUENCY 1000000 - -#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) -void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en); -#else -static inline void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) {} -#endif diff --git a/arch/arm/mach-omap2/am35xx.h b/arch/arm/mach-omap2/am35xx.h deleted file mode 100644 index 95594495fcf6..000000000000 --- a/arch/arm/mach-omap2/am35xx.h +++ /dev/null @@ -1,46 +0,0 @@ -/*: - * Address mappings and base address for AM35XX specific interconnects - * and peripherals. - * - * Copyright (C) 2009 Texas Instruments - * - * Author: Sriramakrishnan <srk@ti.com> - * Vaibhav Hiremath <hvaibhav@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARCH_AM35XX_H -#define __ASM_ARCH_AM35XX_H - -/* - * Base addresses - * Note: OMAP3430 IVA2 memory space is being used for AM35xx IPSS modules - */ -#define AM35XX_IPSS_EMAC_BASE 0x5C000000 -#define AM35XX_IPSS_USBOTGSS_BASE 0x5C040000 -#define AM35XX_IPSS_HECC_BASE 0x5C050000 -#define AM35XX_IPSS_VPFE_BASE 0x5C060000 - - -/* HECC module specifc offset definitions */ -#define AM35XX_HECC_SCC_HECC_OFFSET (0x0) -#define AM35XX_HECC_SCC_RAM_OFFSET (0x3000) -#define AM35XX_HECC_RAM_OFFSET (0x3000) -#define AM35XX_HECC_MBOX_OFFSET (0x2000) -#define AM35XX_HECC_INT_LINE (0x0) -#define AM35XX_HECC_VERSION (0x1) - -#define AM35XX_EMAC_CNTRL_OFFSET (0x10000) -#define AM35XX_EMAC_CNTRL_MOD_OFFSET (0x0) -#define AM35XX_EMAC_CNTRL_RAM_OFFSET (0x20000) -#define AM35XX_EMAC_MDIO_OFFSET (0x30000) -#define AM35XX_IPSS_MDIO_BASE (AM35XX_IPSS_EMAC_BASE + \ - AM35XX_EMAC_MDIO_OFFSET) -#define AM35XX_EMAC_CNTRL_RAM_SIZE (0x2000) -#define AM35XX_EMAC_RAM_ADDR (AM3517_EMAC_BASE + \ - AM3517_EMAC_CNTRL_RAM_OFFSET) -#define AM35XX_EMAC_HW_RAM_ADDR (0x01E20000) - -#endif /* __ASM_ARCH_AM35XX_H */ diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c deleted file mode 100644 index 8168ddabaeda..000000000000 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * Support for AM3517/05 Craneboard - * http://www.mistralsolutions.com/products/craneboard.php - * - * Copyright (C) 2010 Mistral Solutions Pvt Ltd. <www.mistralsolutions.com> - * Author: R.Srinath <srinath@mistralsolutions.com> - * - * Based on mach-omap2/board-am3517evm.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, - * whether express or implied; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/mfd/tps65910.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> -#include <linux/omap-gpmc.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "common-board-devices.h" -#include "board-flash.h" - -#include "am35xx-emac.h" -#include "mux.h" -#include "control.h" - -#define GPIO_USB_POWER 35 -#define GPIO_USB_NRESET 38 - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 1, - .reset_gpio = GPIO_USB_NRESET, - .vcc_gpio = GPIO_USB_POWER, - .vcc_polarity = 1, - }, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, -}; - -static struct mtd_partition crane_nand_partitions[] = { - { - .name = "X-Loader", - .offset = 0, - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, - .size = 14 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "U-Boot Env", - .offset = MTDPART_OFS_APPEND, - .size = 2 * NAND_BLOCK_SIZE, - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, - .size = 40 * NAND_BLOCK_SIZE, - }, - { - .name = "File System", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct tps65910_board tps65910_pdata = { - .irq = 7 + OMAP_INTC_START, - .en_ck32k_xtal = true, -}; - -static struct i2c_board_info __initdata tps65910_board_info[] = { - { - I2C_BOARD_INFO("tps65910", 0x2d), - .platform_data = &tps65910_pdata, - }, -}; - -static void __init am3517_crane_i2c_init(void) -{ - omap_register_i2c_bus(1, 2600, tps65910_board_info, - ARRAY_SIZE(tps65910_board_info)); -} - -static void __init am3517_crane_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_serial_init(); - omap_sdrc_init(NULL, NULL); - board_nand_init(crane_nand_partitions, - ARRAY_SIZE(crane_nand_partitions), 0, - NAND_BUSWIDTH_16, NULL); - am3517_crane_i2c_init(); - - /* Configure GPIO for EHCI port */ - if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) { - pr_err("Can not configure mux for GPIO_USB_NRESET %d\n", - GPIO_USB_NRESET); - return; - } - - if (omap_mux_init_gpio(GPIO_USB_POWER, OMAP_PIN_OUTPUT)) { - pr_err("Can not configure mux for GPIO_USB_POWER %d\n", - GPIO_USB_POWER); - return; - } - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); - am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); -} - -MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = am35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = am3517_crane_init, - .init_late = am35xx_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c deleted file mode 100644 index 1c091b3fa312..000000000000 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ /dev/null @@ -1,373 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-am3517evm.c - * - * Copyright (C) 2009 Texas Instruments Incorporated - * Author: Ranjith Lohithakshan <ranjithl@ti.com> - * - * Based on mach-omap2/board-omap3evm.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, - * whether express or implied; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/platform_data/pca953x.h> -#include <linux/can/platform/ti_hecc.h> -#include <linux/davinci_emac.h> -#include <linux/mmc/host.h> -#include <linux/usb/musb.h> -#include <linux/platform_data/gpio-omap.h> - -#include "am35xx.h" -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "common.h" -#include <video/omapdss.h> -#include <video/omap-panel-data.h> - -#include "am35xx-emac.h" -#include "mux.h" -#include "control.h" -#include "hsmmc.h" - -#define LCD_PANEL_PWR 176 -#define LCD_PANEL_BKLIGHT_PWR 182 -#define LCD_PANEL_PWM 181 - -static struct i2c_board_info __initdata am3517evm_i2c1_boardinfo[] = { - { - I2C_BOARD_INFO("s35390a", 0x30), - }, -}; - -/* - * RTC - S35390A - */ -#define GPIO_RTCS35390A_IRQ 55 - -static void __init am3517_evm_rtc_init(void) -{ - int r; - - omap_mux_init_gpio(GPIO_RTCS35390A_IRQ, OMAP_PIN_INPUT_PULLUP); - - r = gpio_request_one(GPIO_RTCS35390A_IRQ, GPIOF_IN, "rtcs35390a-irq"); - if (r < 0) { - printk(KERN_WARNING "failed to request GPIO#%d\n", - GPIO_RTCS35390A_IRQ); - return; - } - - am3517evm_i2c1_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ); -} - -/* - * I2C GPIO Expander - TCA6416 - */ - -/* Mounted on Base-Board */ -static struct pca953x_platform_data am3517evm_gpio_expander_info_0 = { - .gpio_base = OMAP_MAX_GPIO_LINES, -}; -static struct i2c_board_info __initdata am3517evm_i2c2_boardinfo[] = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1A), - }, - { - I2C_BOARD_INFO("tca6416", 0x21), - .platform_data = &am3517evm_gpio_expander_info_0, - }, -}; - -/* Mounted on UI Card */ -static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_1 = { - .gpio_base = OMAP_MAX_GPIO_LINES + 16, -}; -static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_2 = { - .gpio_base = OMAP_MAX_GPIO_LINES + 32, -}; -static struct i2c_board_info __initdata am3517evm_i2c3_boardinfo[] = { - { - I2C_BOARD_INFO("tca6416", 0x20), - .platform_data = &am3517evm_ui_gpio_expander_info_1, - }, - { - I2C_BOARD_INFO("tca6416", 0x21), - .platform_data = &am3517evm_ui_gpio_expander_info_2, - }, -}; - -static int __init am3517_evm_i2c_init(void) -{ - omap_register_i2c_bus(1, 400, NULL, 0); - omap_register_i2c_bus(2, 400, am3517evm_i2c2_boardinfo, - ARRAY_SIZE(am3517evm_i2c2_boardinfo)); - omap_register_i2c_bus(3, 400, am3517evm_i2c3_boardinfo, - ARRAY_SIZE(am3517evm_i2c3_boardinfo)); - - return 0; -} - -static const struct display_timing am3517_evm_lcd_videomode = { - .pixelclock = { 0, 9000000, 0 }, - - .hactive = { 0, 480, 0 }, - .hfront_porch = { 0, 3, 0 }, - .hback_porch = { 0, 2, 0 }, - .hsync_len = { 0, 42, 0 }, - - .vactive = { 0, 272, 0 }, - .vfront_porch = { 0, 3, 0 }, - .vback_porch = { 0, 2, 0 }, - .vsync_len = { 0, 11, 0 }, - - .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | - DISPLAY_FLAGS_DE_LOW | DISPLAY_FLAGS_PIXDATA_POSEDGE, -}; - -static struct panel_dpi_platform_data am3517_evm_lcd_pdata = { - .name = "lcd", - .source = "dpi.0", - - .data_lines = 16, - - .display_timing = &am3517_evm_lcd_videomode, - - .enable_gpio = LCD_PANEL_PWR, - .backlight_gpio = LCD_PANEL_BKLIGHT_PWR, -}; - -static struct platform_device am3517_evm_lcd_device = { - .name = "panel-dpi", - .id = 0, - .dev.platform_data = &am3517_evm_lcd_pdata, -}; - -static struct connector_dvi_platform_data am3517_evm_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = -1, -}; - -static struct platform_device am3517_evm_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &am3517_evm_dvi_connector_pdata, -}; - -static struct encoder_tfp410_platform_data am3517_evm_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = -1, -}; - -static struct platform_device am3517_evm_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &am3517_evm_tfp410_pdata, -}; - -static struct connector_atv_platform_data am3517_evm_tv_pdata = { - .name = "tv", - .source = "venc.0", - .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, - .invert_polarity = false, -}; - -static struct platform_device am3517_evm_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &am3517_evm_tv_pdata, -}; - -static struct omap_dss_board_info am3517_evm_dss_data = { - .default_display_name = "lcd", -}; - -static void __init am3517_evm_display_init(void) -{ - gpio_request_one(LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd panel pwm"); - - omap_display_init(&am3517_evm_dss_data); - - platform_device_register(&am3517_evm_tfp410_device); - platform_device_register(&am3517_evm_dvi_connector_device); - platform_device_register(&am3517_evm_lcd_device); - platform_device_register(&am3517_evm_tv_connector_device); -} - -/* - * Board initialization - */ - -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 500, - .set_phy_power = am35x_musb_phy_power, - .clear_irq = am35x_musb_clear_irq, - .set_mode = am35x_set_mode, - .reset = am35x_musb_reset, -}; - -static __init void am3517_evm_musb_init(void) -{ - u32 devconf2; - - /* - * Set up USB clock/mode in the DEVCONF2 register. - */ - devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2); - - /* USB2.0 PHY reference clock is 13 MHz */ - devconf2 &= ~(CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE); - devconf2 |= CONF2_REFFREQ_13MHZ | CONF2_SESENDEN | CONF2_VBDTCTEN - | CONF2_DATPOL; - - omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2); - - usb_musb_init(&musb_board_data); -} - -static __init void am3517_evm_mcbsp1_init(void) -{ - u32 devconf0; - - /* McBSP1 CLKR/FSR signal to be connected to CLKX/FSX pin */ - devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - devconf0 |= OMAP2_MCBSP1_CLKR_MASK | OMAP2_MCBSP1_FSR_MASK; - omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0); -} - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 1, - .reset_gpio = 57, - .vcc_gpio = -EINVAL, - }, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - /* USB OTG DRVVBUS offset = 0x212 */ - OMAP3_MUX(SAD2D_MCAD23, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - - -static struct resource am3517_hecc_resources[] = { - { - .start = AM35XX_IPSS_HECC_BASE, - .end = AM35XX_IPSS_HECC_BASE + 0x3FFF, - .flags = IORESOURCE_MEM, - }, - { - .start = 24 + OMAP_INTC_START, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device am3517_hecc_device = { - .name = "ti_hecc", - .id = -1, - .num_resources = ARRAY_SIZE(am3517_hecc_resources), - .resource = am3517_hecc_resources, -}; - -static struct ti_hecc_platform_data am3517_evm_hecc_pdata = { - .scc_hecc_offset = AM35XX_HECC_SCC_HECC_OFFSET, - .scc_ram_offset = AM35XX_HECC_SCC_RAM_OFFSET, - .hecc_ram_offset = AM35XX_HECC_RAM_OFFSET, - .mbx_offset = AM35XX_HECC_MBOX_OFFSET, - .int_line = AM35XX_HECC_INT_LINE, - .version = AM35XX_HECC_VERSION, -}; - -static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata) -{ - am3517_hecc_device.dev.platform_data = pdata; - platform_device_register(&am3517_hecc_device); -} - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = 127, - .gpio_wp = 126, - }, - { - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = 128, - .gpio_wp = 129, - }, - {} /* Terminator */ -}; - -static void __init am3517_evm_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - - am3517_evm_i2c_init(); - - am3517_evm_display_init(); - - omap_serial_init(); - omap_sdrc_init(NULL, NULL); - - /* Configure GPIO for EHCI port */ - omap_mux_init_gpio(57, OMAP_PIN_OUTPUT); - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); - am3517_evm_hecc_init(&am3517_evm_hecc_pdata); - - /* RTC - S35390A */ - am3517_evm_rtc_init(); - - i2c_register_board_info(1, am3517evm_i2c1_boardinfo, - ARRAY_SIZE(am3517evm_i2c1_boardinfo)); - /*Ethernet*/ - am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); - - /* MUSB */ - am3517_evm_musb_init(); - - /* McBSP1 */ - am3517_evm_mcbsp1_init(); - - /* MMC init function */ - omap_hsmmc_init(mmc); -} - -MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = am35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = am3517_evm_init, - .init_late = am35xx_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c deleted file mode 100644 index 794756df8529..000000000000 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ /dev/null @@ -1,335 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-cm-t3517.c - * - * Support for the CompuLab CM-T3517 modules - * - * Copyright (C) 2010 CompuLab, Ltd. - * Author: Igor Grinberg <grinberg@compulab.co.il> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/omap-gpmc.h> -#include <linux/rtc-v3020.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> -#include <linux/mmc/host.h> -#include <linux/can/platform/ti_hecc.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "common.h" -#include <linux/platform_data/mtd-nand-omap2.h> - -#include "am35xx.h" - -#include "mux.h" -#include "control.h" -#include "hsmmc.h" -#include "common-board-devices.h" -#include "am35xx-emac.h" - -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -static struct gpio_led cm_t3517_leds[] = { - [0] = { - .gpio = 186, - .name = "cm-t3517:green", - .default_trigger = "heartbeat", - .active_low = 0, - }, -}; - -static struct gpio_led_platform_data cm_t3517_led_pdata = { - .num_leds = ARRAY_SIZE(cm_t3517_leds), - .leds = cm_t3517_leds, -}; - -static struct platform_device cm_t3517_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &cm_t3517_led_pdata, - }, -}; - -static void __init cm_t3517_init_leds(void) -{ - platform_device_register(&cm_t3517_led_device); -} -#else -static inline void cm_t3517_init_leds(void) {} -#endif - -#if defined(CONFIG_CAN_TI_HECC) || defined(CONFIG_CAN_TI_HECC_MODULE) -static struct resource cm_t3517_hecc_resources[] = { - { - .start = AM35XX_IPSS_HECC_BASE, - .end = AM35XX_IPSS_HECC_BASE + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = 24 + OMAP_INTC_START, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct ti_hecc_platform_data cm_t3517_hecc_pdata = { - .scc_hecc_offset = AM35XX_HECC_SCC_HECC_OFFSET, - .scc_ram_offset = AM35XX_HECC_SCC_RAM_OFFSET, - .hecc_ram_offset = AM35XX_HECC_RAM_OFFSET, - .mbx_offset = AM35XX_HECC_MBOX_OFFSET, - .int_line = AM35XX_HECC_INT_LINE, - .version = AM35XX_HECC_VERSION, -}; - -static struct platform_device cm_t3517_hecc_device = { - .name = "ti_hecc", - .id = 1, - .num_resources = ARRAY_SIZE(cm_t3517_hecc_resources), - .resource = cm_t3517_hecc_resources, - .dev = { - .platform_data = &cm_t3517_hecc_pdata, - }, -}; - -static void cm_t3517_init_hecc(void) -{ - platform_device_register(&cm_t3517_hecc_device); -} -#else -static inline void cm_t3517_init_hecc(void) {} -#endif - -#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) -static struct omap2_hsmmc_info cm_t3517_mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = 144, - .gpio_wp = 59, - }, - { - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, - {} /* Terminator */ -}; -#else -#define cm_t3517_mmc NULL -#endif - -#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) -#define RTC_IO_GPIO (153) -#define RTC_WR_GPIO (154) -#define RTC_RD_GPIO (53) -#define RTC_CS_GPIO (163) -#define RTC_CS_EN_GPIO (160) - -struct v3020_platform_data cm_t3517_v3020_pdata = { - .use_gpio = 1, - .gpio_cs = RTC_CS_GPIO, - .gpio_wr = RTC_WR_GPIO, - .gpio_rd = RTC_RD_GPIO, - .gpio_io = RTC_IO_GPIO, -}; - -static struct platform_device cm_t3517_rtc_device = { - .name = "v3020", - .id = -1, - .dev = { - .platform_data = &cm_t3517_v3020_pdata, - } -}; - -static void __init cm_t3517_init_rtc(void) -{ - int err; - - err = gpio_request_one(RTC_CS_EN_GPIO, GPIOF_OUT_INIT_HIGH, - "rtc cs en"); - if (err) { - pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err); - return; - } - - platform_device_register(&cm_t3517_rtc_device); -} -#else -static inline void cm_t3517_init_rtc(void) {} -#endif - -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) -#define HSUSB1_RESET_GPIO (146) -#define HSUSB2_RESET_GPIO (147) -#define USB_HUB_RESET_GPIO (152) - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 1, - .reset_gpio = HSUSB1_RESET_GPIO, - .vcc_gpio = -EINVAL, - }, - { - .port = 2, - .reset_gpio = HSUSB2_RESET_GPIO, - .vcc_gpio = -EINVAL, - }, -}; - -static struct usbhs_omap_platform_data cm_t3517_ehci_pdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -static int __init cm_t3517_init_usbh(void) -{ - int err; - - err = gpio_request_one(USB_HUB_RESET_GPIO, GPIOF_OUT_INIT_LOW, - "usb hub rst"); - if (err) { - pr_err("CM-T3517: usb hub rst gpio request failed: %d\n", err); - } else { - udelay(10); - gpio_set_value(USB_HUB_RESET_GPIO, 1); - msleep(1); - } - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&cm_t3517_ehci_pdata); - - return 0; -} -#else -static inline int cm_t3517_init_usbh(void) -{ - return 0; -} -#endif - -#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) -static struct mtd_partition cm_t3517_nand_partitions[] = { - { - .name = "xloader", - .offset = 0, /* Offset = 0x00000 */ - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE - }, - { - .name = "uboot", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 15 * NAND_BLOCK_SIZE, - }, - { - .name = "uboot environment", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ - .size = 2 * NAND_BLOCK_SIZE, - }, - { - .name = "linux", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */ - .size = 32 * NAND_BLOCK_SIZE, - }, - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */ - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap_nand_platform_data cm_t3517_nand_data = { - .parts = cm_t3517_nand_partitions, - .nr_parts = ARRAY_SIZE(cm_t3517_nand_partitions), - .cs = 0, -}; - -static void __init cm_t3517_init_nand(void) -{ - if (gpmc_nand_init(&cm_t3517_nand_data, NULL) < 0) - pr_err("CM-T3517: NAND initialization failed\n"); -} -#else -static inline void cm_t3517_init_nand(void) {} -#endif - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - /* GPIO186 - Green LED */ - OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - - /* RTC GPIOs: */ - /* IO - GPIO153 */ - OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - /* WR# - GPIO154 */ - OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - /* RD# - GPIO53 */ - OMAP3_MUX(GPMC_NCS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - /* CS# - GPIO163 */ - OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - /* CS EN - GPIO160 */ - OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - - /* HSUSB1 RESET */ - OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - /* HSUSB2 RESET */ - OMAP3_MUX(UART2_RX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - /* CM-T3517 USB HUB nRESET */ - OMAP3_MUX(MCBSP4_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - - /* CD - GPIO144 and WP - GPIO59 for MMC1 - SB-T35 */ - OMAP3_MUX(UART2_CTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), - OMAP3_MUX(GPMC_CLK, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), - - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static void __init cm_t3517_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_serial_init(); - omap_sdrc_init(NULL, NULL); - cm_t3517_init_leds(); - cm_t3517_init_nand(); - cm_t3517_init_rtc(); - cm_t3517_init_usbh(); - cm_t3517_init_hecc(); - am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); - omap_hsmmc_init(cm_t3517_mmc); -} - -MACHINE_START(CM_T3517, "Compulab CM-T3517") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = am35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = cm_t3517_init, - .init_late = am35xx_init_late, - .init_time = omap3_gptimer_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index b61c049f92d6..34ff14b7beab 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -162,6 +162,42 @@ DT_MACHINE_START(AM3517_DT, "Generic AM3517 (Flattened Device Tree)") MACHINE_END #endif +#ifdef CONFIG_SOC_TI81XX +static const char *const ti814x_boards_compat[] __initconst = { + "ti,dm8148", + "ti,dm814", + NULL, +}; + +DT_MACHINE_START(TI81XX_DT, "Generic ti814x (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = ti81xx_map_io, + .init_early = ti814x_init_early, + .init_machine = omap_generic_init, + .init_late = ti81xx_init_late, + .init_time = omap3_gptimer_timer_init, + .dt_compat = ti814x_boards_compat, + .restart = ti81xx_restart, +MACHINE_END + +static const char *const ti816x_boards_compat[] __initconst = { + "ti,dm8168", + "ti,dm816", + NULL, +}; + +DT_MACHINE_START(TI816X_DT, "Generic ti816x (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = ti81xx_map_io, + .init_early = ti816x_init_early, + .init_machine = omap_generic_init, + .init_late = ti81xx_init_late, + .init_time = omap3_gptimer_timer_init, + .dt_compat = ti816x_boards_compat, + .restart = ti81xx_restart, +MACHINE_END +#endif + #ifdef CONFIG_SOC_AM33XX static const char *const am33xx_boards_compat[] __initconst = { "ti,am33xx", @@ -189,6 +225,9 @@ static const char *const omap4_boards_compat[] __initconst = { }; DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") + .l2c_aux_val = OMAP_L2C_AUX_CTRL, + .l2c_aux_mask = 0xcf9fffff, + .l2c_write_sec = omap4_l2c310_write_sec, .reserve = omap_reserve, .smp = smp_ops(omap4_smp_ops), .map_io = omap4_map_io, @@ -232,6 +271,9 @@ static const char *const am43_boards_compat[] __initconst = { }; DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)") + .l2c_aux_val = OMAP_L2C_AUX_CTRL, + .l2c_aux_mask = 0xcf9fffff, + .l2c_write_sec = omap4_l2c310_write_sec, .map_io = am33xx_map_io, .init_early = am43xx_init_early, .init_late = am43xx_init_late, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 7f1708738c30..969e1003dd92 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -254,12 +254,14 @@ static void pandora_wl1251_init_card(struct mmc_card *card) * We have TI wl1251 attached to MMC3. Pass this information to * SDIO core because it can't be probed by normal methods. */ - card->quirks |= MMC_QUIRK_NONSTD_SDIO; - card->cccr.wide_bus = 1; - card->cis.vendor = 0x104c; - card->cis.device = 0x9066; - card->cis.blksize = 512; - card->cis.max_dtr = 20000000; + if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) { + card->quirks |= MMC_QUIRK_NONSTD_SDIO; + card->cccr.wide_bus = 1; + card->cis.vendor = 0x104c; + card->cis.device = 0x9066; + card->cis.blksize = 512; + card->cis.max_dtr = 20000000; + } } static struct omap2_hsmmc_info omap3pandora_mmc[] = { diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c deleted file mode 100644 index 644ff3231bb8..000000000000 --- a/arch/arm/mach-omap2/cclock3xxx_data.c +++ /dev/null @@ -1,3692 +0,0 @@ -/* - * OMAP3 clock data - * - * Copyright (C) 2007-2012 Texas Instruments, Inc. - * Copyright (C) 2007-2011 Nokia Corporation - * - * Written by Paul Walmsley - * Updated to COMMON clk data format by Rajendra Nayak <rnayak@ti.com> - * With many device clock fixes by Kevin Hilman and Jouni Högander - * DPLL bypass clock support added by Roman Tereshonkov - * - */ - -/* - * Virtual clocks are introduced as convenient tools. - * They are sources for other clocks and not supposed - * to be requested from drivers directly. - */ - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/clk-private.h> -#include <linux/list.h> -#include <linux/io.h> - -#include "soc.h" -#include "iomap.h" -#include "clock.h" -#include "clock3xxx.h" -#include "clock34xx.h" -#include "clock36xx.h" -#include "clock3517.h" -#include "cm3xxx.h" -#include "cm-regbits-34xx.h" -#include "prm3xxx.h" -#include "prm-regbits-34xx.h" -#include "control.h" - -/* - * clocks - */ - -#define OMAP_CM_REGADDR OMAP34XX_CM_REGADDR - -/* Maximum DPLL multiplier, divider values for OMAP3 */ -#define OMAP3_MAX_DPLL_MULT 2047 -#define OMAP3630_MAX_JTYPE_DPLL_MULT 4095 -#define OMAP3_MAX_DPLL_DIV 128 - -DEFINE_CLK_FIXED_RATE(dummy_apb_pclk, CLK_IS_ROOT, 0x0, 0x0); - -DEFINE_CLK_FIXED_RATE(mcbsp_clks, CLK_IS_ROOT, 0x0, 0x0); - -DEFINE_CLK_FIXED_RATE(omap_32k_fck, CLK_IS_ROOT, 32768, 0x0); - -DEFINE_CLK_FIXED_RATE(pclk_ck, CLK_IS_ROOT, 27000000, 0x0); - -DEFINE_CLK_FIXED_RATE(rmii_ck, CLK_IS_ROOT, 50000000, 0x0); - -DEFINE_CLK_FIXED_RATE(secure_32k_fck, CLK_IS_ROOT, 32768, 0x0); - -DEFINE_CLK_FIXED_RATE(sys_altclk, CLK_IS_ROOT, 0x0, 0x0); - -DEFINE_CLK_FIXED_RATE(virt_12m_ck, CLK_IS_ROOT, 12000000, 0x0); - -DEFINE_CLK_FIXED_RATE(virt_13m_ck, CLK_IS_ROOT, 13000000, 0x0); - -DEFINE_CLK_FIXED_RATE(virt_16_8m_ck, CLK_IS_ROOT, 16800000, 0x0); - -DEFINE_CLK_FIXED_RATE(virt_19200000_ck, CLK_IS_ROOT, 19200000, 0x0); - -DEFINE_CLK_FIXED_RATE(virt_26000000_ck, CLK_IS_ROOT, 26000000, 0x0); - -DEFINE_CLK_FIXED_RATE(virt_38_4m_ck, CLK_IS_ROOT, 38400000, 0x0); - -static const char *osc_sys_ck_parent_names[] = { - "virt_12m_ck", "virt_13m_ck", "virt_19200000_ck", "virt_26000000_ck", - "virt_38_4m_ck", "virt_16_8m_ck", -}; - -DEFINE_CLK_MUX(osc_sys_ck, osc_sys_ck_parent_names, NULL, 0x0, - OMAP3430_PRM_CLKSEL, OMAP3430_SYS_CLKIN_SEL_SHIFT, - OMAP3430_SYS_CLKIN_SEL_WIDTH, 0x0, NULL); - -DEFINE_CLK_DIVIDER(sys_ck, "osc_sys_ck", &osc_sys_ck, 0x0, - OMAP3430_PRM_CLKSRC_CTRL, OMAP_SYSCLKDIV_SHIFT, - OMAP_SYSCLKDIV_WIDTH, CLK_DIVIDER_ONE_BASED, NULL); - -static struct dpll_data dpll3_dd = { - .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .mult_mask = OMAP3430_CORE_DPLL_MULT_MASK, - .div1_mask = OMAP3430_CORE_DPLL_DIV_MASK, - .clk_bypass = &sys_ck, - .clk_ref = &sys_ck, - .freqsel_mask = OMAP3430_CORE_DPLL_FREQSEL_MASK, - .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_mask = OMAP3430_EN_CORE_DPLL_MASK, - .auto_recal_bit = OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430_CORE_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430_CORE_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE), - .autoidle_mask = OMAP3430_AUTO_CORE_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), - .idlest_mask = OMAP3430_ST_CORE_CLK_MASK, - .max_multiplier = OMAP3_MAX_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, -}; - -static struct clk dpll3_ck; - -static const char *dpll3_ck_parent_names[] = { - "sys_ck", - "sys_ck", -}; - -static const struct clk_ops dpll3_ck_ops = { - .init = &omap2_init_clk_clkdm, - .get_parent = &omap2_init_dpll_parent, - .recalc_rate = &omap3_dpll_recalc, - .round_rate = &omap2_dpll_round_rate, -}; - -static struct clk_hw_omap dpll3_ck_hw = { - .hw = { - .clk = &dpll3_ck, - }, - .ops = &clkhwops_omap3_dpll, - .dpll_data = &dpll3_dd, - .clkdm_name = "dpll3_clkdm", -}; - -DEFINE_STRUCT_CLK(dpll3_ck, dpll3_ck_parent_names, dpll3_ck_ops); - -DEFINE_CLK_DIVIDER(dpll3_m2_ck, "dpll3_ck", &dpll3_ck, 0x0, - OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - OMAP3430_CORE_DPLL_CLKOUT_DIV_SHIFT, - OMAP3430_CORE_DPLL_CLKOUT_DIV_WIDTH, - CLK_DIVIDER_ONE_BASED, NULL); - -static struct clk core_ck; - -static const char *core_ck_parent_names[] = { - "dpll3_m2_ck", -}; - -static const struct clk_ops core_ck_ops = {}; - -DEFINE_STRUCT_CLK_HW_OMAP(core_ck, NULL); -DEFINE_STRUCT_CLK(core_ck, core_ck_parent_names, core_ck_ops); - -DEFINE_CLK_DIVIDER(l3_ick, "core_ck", &core_ck, 0x0, - OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - OMAP3430_CLKSEL_L3_SHIFT, OMAP3430_CLKSEL_L3_WIDTH, - CLK_DIVIDER_ONE_BASED, NULL); - -DEFINE_CLK_DIVIDER(l4_ick, "l3_ick", &l3_ick, 0x0, - OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - OMAP3430_CLKSEL_L4_SHIFT, OMAP3430_CLKSEL_L4_WIDTH, - CLK_DIVIDER_ONE_BASED, NULL); - -static struct clk security_l4_ick2; - -static const char *security_l4_ick2_parent_names[] = { - "l4_ick", -}; - -DEFINE_STRUCT_CLK_HW_OMAP(security_l4_ick2, NULL); -DEFINE_STRUCT_CLK(security_l4_ick2, security_l4_ick2_parent_names, core_ck_ops); - -static struct clk aes1_ick; - -static const char *aes1_ick_parent_names[] = { - "security_l4_ick2", -}; - -static const struct clk_ops aes1_ick_ops = { - .enable = &omap2_dflt_clk_enable, - .disable = &omap2_dflt_clk_disable, - .is_enabled = &omap2_dflt_clk_is_enabled, -}; - -static struct clk_hw_omap aes1_ick_hw = { - .hw = { - .clk = &aes1_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP3430_EN_AES1_SHIFT, -}; - -DEFINE_STRUCT_CLK(aes1_ick, aes1_ick_parent_names, aes1_ick_ops); - -static struct clk core_l4_ick; - -static const struct clk_ops core_l4_ick_ops = { - .init = &omap2_init_clk_clkdm, -}; - -DEFINE_STRUCT_CLK_HW_OMAP(core_l4_ick, "core_l4_clkdm"); -DEFINE_STRUCT_CLK(core_l4_ick, security_l4_ick2_parent_names, core_l4_ick_ops); - -static struct clk aes2_ick; - -static const char *aes2_ick_parent_names[] = { - "core_l4_ick", -}; - -static const struct clk_ops aes2_ick_ops = { - .init = &omap2_init_clk_clkdm, - .enable = &omap2_dflt_clk_enable, - .disable = &omap2_dflt_clk_disable, - .is_enabled = &omap2_dflt_clk_is_enabled, -}; - -static struct clk_hw_omap aes2_ick_hw = { - .hw = { - .clk = &aes2_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_AES2_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(aes2_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk dpll1_fck; - -static struct dpll_data dpll1_dd = { - .mult_div1_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), - .mult_mask = OMAP3430_MPU_DPLL_MULT_MASK, - .div1_mask = OMAP3430_MPU_DPLL_DIV_MASK, - .clk_bypass = &dpll1_fck, - .clk_ref = &sys_ck, - .freqsel_mask = OMAP3430_MPU_DPLL_FREQSEL_MASK, - .control_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL), - .enable_mask = OMAP3430_EN_MPU_DPLL_MASK, - .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), - .auto_recal_bit = OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430_MPU_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430_MPU_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL), - .autoidle_mask = OMAP3430_AUTO_MPU_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), - .idlest_mask = OMAP3430_ST_MPU_CLK_MASK, - .max_multiplier = OMAP3_MAX_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, -}; - -static struct clk dpll1_ck; - -static const struct clk_ops dpll1_ck_ops = { - .init = &omap2_init_clk_clkdm, - .enable = &omap3_noncore_dpll_enable, - .disable = &omap3_noncore_dpll_disable, - .get_parent = &omap2_init_dpll_parent, - .recalc_rate = &omap3_dpll_recalc, - .set_rate = &omap3_noncore_dpll_set_rate, - .set_parent = &omap3_noncore_dpll_set_parent, - .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, - .determine_rate = &omap3_noncore_dpll_determine_rate, - .round_rate = &omap2_dpll_round_rate, -}; - -static struct clk_hw_omap dpll1_ck_hw = { - .hw = { - .clk = &dpll1_ck, - }, - .ops = &clkhwops_omap3_dpll, - .dpll_data = &dpll1_dd, - .clkdm_name = "dpll1_clkdm", -}; - -DEFINE_STRUCT_CLK(dpll1_ck, dpll3_ck_parent_names, dpll1_ck_ops); - -DEFINE_CLK_FIXED_FACTOR(dpll1_x2_ck, "dpll1_ck", &dpll1_ck, 0x0, 2, 1); - -DEFINE_CLK_DIVIDER(dpll1_x2m2_ck, "dpll1_x2_ck", &dpll1_x2_ck, 0x0, - OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL), - OMAP3430_MPU_DPLL_CLKOUT_DIV_SHIFT, - OMAP3430_MPU_DPLL_CLKOUT_DIV_WIDTH, - CLK_DIVIDER_ONE_BASED, NULL); - -static struct clk mpu_ck; - -static const char *mpu_ck_parent_names[] = { - "dpll1_x2m2_ck", -}; - -DEFINE_STRUCT_CLK_HW_OMAP(mpu_ck, "mpu_clkdm"); -DEFINE_STRUCT_CLK(mpu_ck, mpu_ck_parent_names, core_l4_ick_ops); - -DEFINE_CLK_DIVIDER(arm_fck, "mpu_ck", &mpu_ck, 0x0, - OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), - OMAP3430_ST_MPU_CLK_SHIFT, OMAP3430_ST_MPU_CLK_WIDTH, - 0x0, NULL); - -static struct clk cam_ick; - -static struct clk_hw_omap cam_ick_hw = { - .hw = { - .clk = &cam_ick, - }, - .ops = &clkhwops_iclk, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_CAM_SHIFT, - .clkdm_name = "cam_clkdm", -}; - -DEFINE_STRUCT_CLK(cam_ick, security_l4_ick2_parent_names, aes2_ick_ops); - -/* DPLL4 */ -/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */ -/* Type: DPLL */ -static struct dpll_data dpll4_dd; - -static struct dpll_data dpll4_dd_34xx __initdata = { - .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2), - .mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK, - .div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK, - .clk_bypass = &sys_ck, - .clk_ref = &sys_ck, - .freqsel_mask = OMAP3430_PERIPH_DPLL_FREQSEL_MASK, - .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_mask = OMAP3430_EN_PERIPH_DPLL_MASK, - .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), - .auto_recal_bit = OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430_PERIPH_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE), - .autoidle_mask = OMAP3430_AUTO_PERIPH_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), - .idlest_mask = OMAP3430_ST_PERIPH_CLK_MASK, - .max_multiplier = OMAP3_MAX_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, -}; - -static struct dpll_data dpll4_dd_3630 __initdata = { - .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2), - .mult_mask = OMAP3630_PERIPH_DPLL_MULT_MASK, - .div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK, - .clk_bypass = &sys_ck, - .clk_ref = &sys_ck, - .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_mask = OMAP3430_EN_PERIPH_DPLL_MASK, - .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), - .auto_recal_bit = OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430_PERIPH_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE), - .autoidle_mask = OMAP3430_AUTO_PERIPH_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), - .idlest_mask = OMAP3430_ST_PERIPH_CLK_MASK, - .dco_mask = OMAP3630_PERIPH_DPLL_DCO_SEL_MASK, - .sddiv_mask = OMAP3630_PERIPH_DPLL_SD_DIV_MASK, - .max_multiplier = OMAP3630_MAX_JTYPE_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, - .flags = DPLL_J_TYPE -}; - -static struct clk dpll4_ck; - -static const struct clk_ops dpll4_ck_ops = { - .init = &omap2_init_clk_clkdm, - .enable = &omap3_noncore_dpll_enable, - .disable = &omap3_noncore_dpll_disable, - .get_parent = &omap2_init_dpll_parent, - .recalc_rate = &omap3_dpll_recalc, - .set_rate = &omap3_dpll4_set_rate, - .set_parent = &omap3_noncore_dpll_set_parent, - .set_rate_and_parent = &omap3_dpll4_set_rate_and_parent, - .determine_rate = &omap3_noncore_dpll_determine_rate, - .round_rate = &omap2_dpll_round_rate, -}; - -static struct clk_hw_omap dpll4_ck_hw = { - .hw = { - .clk = &dpll4_ck, - }, - .dpll_data = &dpll4_dd, - .ops = &clkhwops_omap3_dpll, - .clkdm_name = "dpll4_clkdm", -}; - -DEFINE_STRUCT_CLK(dpll4_ck, dpll3_ck_parent_names, dpll4_ck_ops); - -static const struct clk_div_table dpll4_mx_ck_div_table[] = { - { .div = 1, .val = 1 }, - { .div = 2, .val = 2 }, - { .div = 3, .val = 3 }, - { .div = 4, .val = 4 }, - { .div = 5, .val = 5 }, - { .div = 6, .val = 6 }, - { .div = 7, .val = 7 }, - { .div = 8, .val = 8 }, - { .div = 9, .val = 9 }, - { .div = 10, .val = 10 }, - { .div = 11, .val = 11 }, - { .div = 12, .val = 12 }, - { .div = 13, .val = 13 }, - { .div = 14, .val = 14 }, - { .div = 15, .val = 15 }, - { .div = 16, .val = 16 }, - { .div = 17, .val = 17 }, - { .div = 18, .val = 18 }, - { .div = 19, .val = 19 }, - { .div = 20, .val = 20 }, - { .div = 21, .val = 21 }, - { .div = 22, .val = 22 }, - { .div = 23, .val = 23 }, - { .div = 24, .val = 24 }, - { .div = 25, .val = 25 }, - { .div = 26, .val = 26 }, - { .div = 27, .val = 27 }, - { .div = 28, .val = 28 }, - { .div = 29, .val = 29 }, - { .div = 30, .val = 30 }, - { .div = 31, .val = 31 }, - { .div = 32, .val = 32 }, - { .div = 0 }, -}; - -DEFINE_CLK_DIVIDER(dpll4_m5_ck, "dpll4_ck", &dpll4_ck, 0x0, - OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL), - OMAP3430_CLKSEL_CAM_SHIFT, OMAP3630_CLKSEL_CAM_WIDTH, - CLK_DIVIDER_ONE_BASED, NULL); - -static struct clk dpll4_m5x2_ck; - -static const char *dpll4_m5x2_ck_parent_names[] = { - "dpll4_m5_ck", -}; - -static const struct clk_ops dpll4_m5x2_ck_ops = { - .init = &omap2_init_clk_clkdm, - .enable = &omap2_dflt_clk_enable, - .disable = &omap2_dflt_clk_disable, - .is_enabled = &omap2_dflt_clk_is_enabled, - .set_rate = &omap3_clkoutx2_set_rate, - .recalc_rate = &omap3_clkoutx2_recalc, - .round_rate = &omap3_clkoutx2_round_rate, -}; - -static const struct clk_ops dpll4_m5x2_ck_3630_ops = { - .init = &omap2_init_clk_clkdm, - .enable = &omap36xx_pwrdn_clk_enable_with_hsdiv_restore, - .disable = &omap2_dflt_clk_disable, - .recalc_rate = &omap3_clkoutx2_recalc, -}; - -static struct clk_hw_omap dpll4_m5x2_ck_hw = { - .hw = { - .clk = &dpll4_m5x2_ck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll4_clkdm", -}; - -DEFINE_STRUCT_CLK_FLAGS(dpll4_m5x2_ck, dpll4_m5x2_ck_parent_names, - dpll4_m5x2_ck_ops, CLK_SET_RATE_PARENT); - -static struct clk dpll4_m5x2_ck_3630 = { - .name = "dpll4_m5x2_ck", - .hw = &dpll4_m5x2_ck_hw.hw, - .parent_names = dpll4_m5x2_ck_parent_names, - .num_parents = ARRAY_SIZE(dpll4_m5x2_ck_parent_names), - .ops = &dpll4_m5x2_ck_3630_ops, - .flags = CLK_SET_RATE_PARENT, -}; - -static struct clk cam_mclk; - -static const char *cam_mclk_parent_names[] = { - "dpll4_m5x2_ck", -}; - -static struct clk_hw_omap cam_mclk_hw = { - .hw = { - .clk = &cam_mclk, - }, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_CAM_SHIFT, - .clkdm_name = "cam_clkdm", -}; - -static struct clk cam_mclk = { - .name = "cam_mclk", - .hw = &cam_mclk_hw.hw, - .parent_names = cam_mclk_parent_names, - .num_parents = ARRAY_SIZE(cam_mclk_parent_names), - .ops = &aes2_ick_ops, - .flags = CLK_SET_RATE_PARENT, -}; - -static const struct clksel_rate clkout2_src_core_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_3XXX }, - { .div = 0 } -}; - -static const struct clksel_rate clkout2_src_sys_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, - { .div = 0 } -}; - -static const struct clksel_rate clkout2_src_96m_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_3XXX }, - { .div = 0 } -}; - -DEFINE_CLK_DIVIDER(dpll4_m2_ck, "dpll4_ck", &dpll4_ck, 0x0, - OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3), - OMAP3430_DIV_96M_SHIFT, OMAP3630_DIV_96M_WIDTH, - CLK_DIVIDER_ONE_BASED, NULL); - -static struct clk dpll4_m2x2_ck; - -static const char *dpll4_m2x2_ck_parent_names[] = { - "dpll4_m2_ck", -}; - -static struct clk_hw_omap dpll4_m2x2_ck_hw = { - .hw = { - .clk = &dpll4_m2x2_ck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_96M_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll4_clkdm", -}; - -DEFINE_STRUCT_CLK(dpll4_m2x2_ck, dpll4_m2x2_ck_parent_names, dpll4_m5x2_ck_ops); - -static struct clk dpll4_m2x2_ck_3630 = { - .name = "dpll4_m2x2_ck", - .hw = &dpll4_m2x2_ck_hw.hw, - .parent_names = dpll4_m2x2_ck_parent_names, - .num_parents = ARRAY_SIZE(dpll4_m2x2_ck_parent_names), - .ops = &dpll4_m5x2_ck_3630_ops, -}; - -static struct clk omap_96m_alwon_fck; - -static const char *omap_96m_alwon_fck_parent_names[] = { - "dpll4_m2x2_ck", -}; - -DEFINE_STRUCT_CLK_HW_OMAP(omap_96m_alwon_fck, NULL); -DEFINE_STRUCT_CLK(omap_96m_alwon_fck, omap_96m_alwon_fck_parent_names, - core_ck_ops); - -static struct clk cm_96m_fck; - -static const char *cm_96m_fck_parent_names[] = { - "omap_96m_alwon_fck", -}; - -DEFINE_STRUCT_CLK_HW_OMAP(cm_96m_fck, NULL); -DEFINE_STRUCT_CLK(cm_96m_fck, cm_96m_fck_parent_names, core_ck_ops); - -static const struct clksel_rate clkout2_src_54m_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_3XXX }, - { .div = 0 } -}; - -DEFINE_CLK_DIVIDER_TABLE(dpll4_m3_ck, "dpll4_ck", &dpll4_ck, 0x0, - OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), - OMAP3430_CLKSEL_TV_SHIFT, OMAP3630_CLKSEL_TV_WIDTH, - 0, dpll4_mx_ck_div_table, NULL); - -static struct clk dpll4_m3x2_ck; - -static const char *dpll4_m3x2_ck_parent_names[] = { - "dpll4_m3_ck", -}; - -static struct clk_hw_omap dpll4_m3x2_ck_hw = { - .hw = { - .clk = &dpll4_m3x2_ck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_TV_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll4_clkdm", -}; - -DEFINE_STRUCT_CLK(dpll4_m3x2_ck, dpll4_m3x2_ck_parent_names, dpll4_m5x2_ck_ops); - -static struct clk dpll4_m3x2_ck_3630 = { - .name = "dpll4_m3x2_ck", - .hw = &dpll4_m3x2_ck_hw.hw, - .parent_names = dpll4_m3x2_ck_parent_names, - .num_parents = ARRAY_SIZE(dpll4_m3x2_ck_parent_names), - .ops = &dpll4_m5x2_ck_3630_ops, -}; - -static const char *omap_54m_fck_parent_names[] = { - "dpll4_m3x2_ck", "sys_altclk", -}; - -DEFINE_CLK_MUX(omap_54m_fck, omap_54m_fck_parent_names, NULL, 0x0, - OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), OMAP3430_SOURCE_54M_SHIFT, - OMAP3430_SOURCE_54M_WIDTH, 0x0, NULL); - -static const struct clksel clkout2_src_clksel[] = { - { .parent = &core_ck, .rates = clkout2_src_core_rates }, - { .parent = &sys_ck, .rates = clkout2_src_sys_rates }, - { .parent = &cm_96m_fck, .rates = clkout2_src_96m_rates }, - { .parent = &omap_54m_fck, .rates = clkout2_src_54m_rates }, - { .parent = NULL }, -}; - -static const char *clkout2_src_ck_parent_names[] = { - "core_ck", "sys_ck", "cm_96m_fck", "omap_54m_fck", -}; - -static const struct clk_ops clkout2_src_ck_ops = { - .init = &omap2_init_clk_clkdm, - .enable = &omap2_dflt_clk_enable, - .disable = &omap2_dflt_clk_disable, - .is_enabled = &omap2_dflt_clk_is_enabled, - .recalc_rate = &omap2_clksel_recalc, - .get_parent = &omap2_clksel_find_parent_index, - .set_parent = &omap2_clksel_set_parent, -}; - -DEFINE_CLK_OMAP_MUX_GATE(clkout2_src_ck, "core_clkdm", - clkout2_src_clksel, OMAP3430_CM_CLKOUT_CTRL, - OMAP3430_CLKOUT2SOURCE_MASK, - OMAP3430_CM_CLKOUT_CTRL, OMAP3430_CLKOUT2_EN_SHIFT, - NULL, clkout2_src_ck_parent_names, clkout2_src_ck_ops); - -static const struct clksel_rate omap_48m_cm96m_rates[] = { - { .div = 2, .val = 0, .flags = RATE_IN_3XXX }, - { .div = 0 } -}; - -static const struct clksel_rate omap_48m_alt_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, - { .div = 0 } -}; - -static const struct clksel omap_48m_clksel[] = { - { .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates }, - { .parent = &sys_altclk, .rates = omap_48m_alt_rates }, - { .parent = NULL }, -}; - -static const char *omap_48m_fck_parent_names[] = { - "cm_96m_fck", "sys_altclk", -}; - -static struct clk omap_48m_fck; - -static const struct clk_ops omap_48m_fck_ops = { - .recalc_rate = &omap2_clksel_recalc, - .get_parent = &omap2_clksel_find_parent_index, - .set_parent = &omap2_clksel_set_parent, -}; - -static struct clk_hw_omap omap_48m_fck_hw = { - .hw = { - .clk = &omap_48m_fck, - }, - .clksel = omap_48m_clksel, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_SOURCE_48M_MASK, -}; - -DEFINE_STRUCT_CLK(omap_48m_fck, omap_48m_fck_parent_names, omap_48m_fck_ops); - -DEFINE_CLK_FIXED_FACTOR(omap_12m_fck, "omap_48m_fck", &omap_48m_fck, 0x0, 1, 4); - -static struct clk core_12m_fck; - -static const char *core_12m_fck_parent_names[] = { - "omap_12m_fck", -}; - -DEFINE_STRUCT_CLK_HW_OMAP(core_12m_fck, "core_l4_clkdm"); -DEFINE_STRUCT_CLK(core_12m_fck, core_12m_fck_parent_names, core_l4_ick_ops); - -static struct clk core_48m_fck; - -static const char *core_48m_fck_parent_names[] = { - "omap_48m_fck", -}; - -DEFINE_STRUCT_CLK_HW_OMAP(core_48m_fck, "core_l4_clkdm"); -DEFINE_STRUCT_CLK(core_48m_fck, core_48m_fck_parent_names, core_l4_ick_ops); - -static const char *omap_96m_fck_parent_names[] = { - "cm_96m_fck", "sys_ck", -}; - -DEFINE_CLK_MUX(omap_96m_fck, omap_96m_fck_parent_names, NULL, 0x0, - OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - OMAP3430_SOURCE_96M_SHIFT, OMAP3430_SOURCE_96M_WIDTH, 0x0, NULL); - -static struct clk core_96m_fck; - -static const char *core_96m_fck_parent_names[] = { - "omap_96m_fck", -}; - -DEFINE_STRUCT_CLK_HW_OMAP(core_96m_fck, "core_l4_clkdm"); -DEFINE_STRUCT_CLK(core_96m_fck, core_96m_fck_parent_names, core_l4_ick_ops); - -static struct clk core_l3_ick; - -static const char *core_l3_ick_parent_names[] = { - "l3_ick", -}; - -DEFINE_STRUCT_CLK_HW_OMAP(core_l3_ick, "core_l3_clkdm"); -DEFINE_STRUCT_CLK(core_l3_ick, core_l3_ick_parent_names, core_l4_ick_ops); - -DEFINE_CLK_FIXED_FACTOR(dpll3_m2x2_ck, "dpll3_m2_ck", &dpll3_m2_ck, 0x0, 2, 1); - -static struct clk corex2_fck; - -static const char *corex2_fck_parent_names[] = { - "dpll3_m2x2_ck", -}; - -DEFINE_STRUCT_CLK_HW_OMAP(corex2_fck, NULL); -DEFINE_STRUCT_CLK(corex2_fck, corex2_fck_parent_names, core_ck_ops); - -static const char *cpefuse_fck_parent_names[] = { - "sys_ck", -}; - -static struct clk cpefuse_fck; - -static struct clk_hw_omap cpefuse_fck_hw = { - .hw = { - .clk = &cpefuse_fck, - }, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), - .enable_bit = OMAP3430ES2_EN_CPEFUSE_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(cpefuse_fck, cpefuse_fck_parent_names, aes2_ick_ops); - -static struct clk csi2_96m_fck; - -static const char *csi2_96m_fck_parent_names[] = { - "core_96m_fck", -}; - -static struct clk_hw_omap csi2_96m_fck_hw = { - .hw = { - .clk = &csi2_96m_fck, - }, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_CSI2_SHIFT, - .clkdm_name = "cam_clkdm", -}; - -DEFINE_STRUCT_CLK(csi2_96m_fck, csi2_96m_fck_parent_names, aes2_ick_ops); - -static struct clk d2d_26m_fck; - -static struct clk_hw_omap d2d_26m_fck_hw = { - .hw = { - .clk = &d2d_26m_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430ES1_EN_D2D_SHIFT, - .clkdm_name = "d2d_clkdm", -}; - -DEFINE_STRUCT_CLK(d2d_26m_fck, cpefuse_fck_parent_names, aes2_ick_ops); - -static struct clk des1_ick; - -static struct clk_hw_omap des1_ick_hw = { - .hw = { - .clk = &des1_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP3430_EN_DES1_SHIFT, -}; - -DEFINE_STRUCT_CLK(des1_ick, aes1_ick_parent_names, aes1_ick_ops); - -static struct clk des2_ick; - -static struct clk_hw_omap des2_ick_hw = { - .hw = { - .clk = &des2_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_DES2_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(des2_ick, aes2_ick_parent_names, aes2_ick_ops); - -DEFINE_CLK_DIVIDER(dpll1_fck, "core_ck", &core_ck, 0x0, - OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), - OMAP3430_MPU_CLK_SRC_SHIFT, OMAP3430_MPU_CLK_SRC_WIDTH, - CLK_DIVIDER_ONE_BASED, NULL); - -static struct clk dpll2_fck; - -static struct dpll_data dpll2_dd = { - .mult_div1_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), - .mult_mask = OMAP3430_IVA2_DPLL_MULT_MASK, - .div1_mask = OMAP3430_IVA2_DPLL_DIV_MASK, - .clk_bypass = &dpll2_fck, - .clk_ref = &sys_ck, - .freqsel_mask = OMAP3430_IVA2_DPLL_FREQSEL_MASK, - .control_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL), - .enable_mask = OMAP3430_EN_IVA2_DPLL_MASK, - .modes = ((1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) | - (1 << DPLL_LOW_POWER_BYPASS)), - .auto_recal_bit = OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL), - .autoidle_mask = OMAP3430_AUTO_IVA2_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL), - .idlest_mask = OMAP3430_ST_IVA2_CLK_MASK, - .max_multiplier = OMAP3_MAX_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, -}; - -static struct clk dpll2_ck; - -static struct clk_hw_omap dpll2_ck_hw = { - .hw = { - .clk = &dpll2_ck, - }, - .ops = &clkhwops_omap3_dpll, - .dpll_data = &dpll2_dd, - .clkdm_name = "dpll2_clkdm", -}; - -DEFINE_STRUCT_CLK(dpll2_ck, dpll3_ck_parent_names, dpll1_ck_ops); - -DEFINE_CLK_DIVIDER(dpll2_fck, "core_ck", &core_ck, 0x0, - OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), - OMAP3430_IVA2_CLK_SRC_SHIFT, OMAP3430_IVA2_CLK_SRC_WIDTH, - CLK_DIVIDER_ONE_BASED, NULL); - -DEFINE_CLK_DIVIDER(dpll2_m2_ck, "dpll2_ck", &dpll2_ck, 0x0, - OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL2_PLL), - OMAP3430_IVA2_DPLL_CLKOUT_DIV_SHIFT, - OMAP3430_IVA2_DPLL_CLKOUT_DIV_WIDTH, - CLK_DIVIDER_ONE_BASED, NULL); - -DEFINE_CLK_DIVIDER(dpll3_m3_ck, "dpll3_ck", &dpll3_ck, 0x0, - OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - OMAP3430_DIV_DPLL3_SHIFT, OMAP3430_DIV_DPLL3_WIDTH, - CLK_DIVIDER_ONE_BASED, NULL); - -static struct clk dpll3_m3x2_ck; - -static const char *dpll3_m3x2_ck_parent_names[] = { - "dpll3_m3_ck", -}; - -static struct clk_hw_omap dpll3_m3x2_ck_hw = { - .hw = { - .clk = &dpll3_m3x2_ck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_EMU_CORE_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll3_clkdm", -}; - -DEFINE_STRUCT_CLK(dpll3_m3x2_ck, dpll3_m3x2_ck_parent_names, dpll4_m5x2_ck_ops); - -static struct clk dpll3_m3x2_ck_3630 = { - .name = "dpll3_m3x2_ck", - .hw = &dpll3_m3x2_ck_hw.hw, - .parent_names = dpll3_m3x2_ck_parent_names, - .num_parents = ARRAY_SIZE(dpll3_m3x2_ck_parent_names), - .ops = &dpll4_m5x2_ck_3630_ops, -}; - -DEFINE_CLK_FIXED_FACTOR(dpll3_x2_ck, "dpll3_ck", &dpll3_ck, 0x0, 2, 1); - -DEFINE_CLK_DIVIDER_TABLE(dpll4_m4_ck, "dpll4_ck", &dpll4_ck, 0x0, - OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), - OMAP3430_CLKSEL_DSS1_SHIFT, OMAP3630_CLKSEL_DSS1_WIDTH, - 0, dpll4_mx_ck_div_table, NULL); - -static struct clk dpll4_m4x2_ck; - -static const char *dpll4_m4x2_ck_parent_names[] = { - "dpll4_m4_ck", -}; - -static struct clk_hw_omap dpll4_m4x2_ck_hw = { - .hw = { - .clk = &dpll4_m4x2_ck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_DSS1_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll4_clkdm", -}; - -DEFINE_STRUCT_CLK_FLAGS(dpll4_m4x2_ck, dpll4_m4x2_ck_parent_names, - dpll4_m5x2_ck_ops, CLK_SET_RATE_PARENT); - -static struct clk dpll4_m4x2_ck_3630 = { - .name = "dpll4_m4x2_ck", - .hw = &dpll4_m4x2_ck_hw.hw, - .parent_names = dpll4_m4x2_ck_parent_names, - .num_parents = ARRAY_SIZE(dpll4_m4x2_ck_parent_names), - .ops = &dpll4_m5x2_ck_3630_ops, - .flags = CLK_SET_RATE_PARENT, -}; - -DEFINE_CLK_DIVIDER(dpll4_m6_ck, "dpll4_ck", &dpll4_ck, 0x0, - OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - OMAP3430_DIV_DPLL4_SHIFT, OMAP3630_DIV_DPLL4_WIDTH, - CLK_DIVIDER_ONE_BASED, NULL); - -static struct clk dpll4_m6x2_ck; - -static const char *dpll4_m6x2_ck_parent_names[] = { - "dpll4_m6_ck", -}; - -static struct clk_hw_omap dpll4_m6x2_ck_hw = { - .hw = { - .clk = &dpll4_m6x2_ck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_EMU_PERIPH_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll4_clkdm", -}; - -DEFINE_STRUCT_CLK(dpll4_m6x2_ck, dpll4_m6x2_ck_parent_names, dpll4_m5x2_ck_ops); - -static struct clk dpll4_m6x2_ck_3630 = { - .name = "dpll4_m6x2_ck", - .hw = &dpll4_m6x2_ck_hw.hw, - .parent_names = dpll4_m6x2_ck_parent_names, - .num_parents = ARRAY_SIZE(dpll4_m6x2_ck_parent_names), - .ops = &dpll4_m5x2_ck_3630_ops, -}; - -DEFINE_CLK_FIXED_FACTOR(dpll4_x2_ck, "dpll4_ck", &dpll4_ck, 0x0, 2, 1); - -static struct dpll_data dpll5_dd = { - .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4), - .mult_mask = OMAP3430ES2_PERIPH2_DPLL_MULT_MASK, - .div1_mask = OMAP3430ES2_PERIPH2_DPLL_DIV_MASK, - .clk_bypass = &sys_ck, - .clk_ref = &sys_ck, - .freqsel_mask = OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK, - .control_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2), - .enable_mask = OMAP3430ES2_EN_PERIPH2_DPLL_MASK, - .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), - .auto_recal_bit = OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL), - .autoidle_mask = OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2), - .idlest_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK, - .max_multiplier = OMAP3_MAX_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, -}; - -static struct clk dpll5_ck; - -static struct clk_hw_omap dpll5_ck_hw = { - .hw = { - .clk = &dpll5_ck, - }, - .ops = &clkhwops_omap3_dpll, - .dpll_data = &dpll5_dd, - .clkdm_name = "dpll5_clkdm", -}; - -DEFINE_STRUCT_CLK(dpll5_ck, dpll3_ck_parent_names, dpll1_ck_ops); - -DEFINE_CLK_DIVIDER(dpll5_m2_ck, "dpll5_ck", &dpll5_ck, 0x0, - OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5), - OMAP3430ES2_DIV_120M_SHIFT, OMAP3430ES2_DIV_120M_WIDTH, - CLK_DIVIDER_ONE_BASED, NULL); - -static struct clk dss1_alwon_fck_3430es1; - -static const char *dss1_alwon_fck_3430es1_parent_names[] = { - "dpll4_m4x2_ck", -}; - -static struct clk_hw_omap dss1_alwon_fck_3430es1_hw = { - .hw = { - .clk = &dss1_alwon_fck_3430es1, - }, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_DSS1_SHIFT, - .clkdm_name = "dss_clkdm", -}; - -DEFINE_STRUCT_CLK_FLAGS(dss1_alwon_fck_3430es1, - dss1_alwon_fck_3430es1_parent_names, aes2_ick_ops, - CLK_SET_RATE_PARENT); - -static struct clk dss1_alwon_fck_3430es2; - -static struct clk_hw_omap dss1_alwon_fck_3430es2_hw = { - .hw = { - .clk = &dss1_alwon_fck_3430es2, - }, - .ops = &clkhwops_omap3430es2_dss_usbhost_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_DSS1_SHIFT, - .clkdm_name = "dss_clkdm", -}; - -DEFINE_STRUCT_CLK_FLAGS(dss1_alwon_fck_3430es2, - dss1_alwon_fck_3430es1_parent_names, aes2_ick_ops, - CLK_SET_RATE_PARENT); - -static struct clk dss2_alwon_fck; - -static struct clk_hw_omap dss2_alwon_fck_hw = { - .hw = { - .clk = &dss2_alwon_fck, - }, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_DSS2_SHIFT, - .clkdm_name = "dss_clkdm", -}; - -DEFINE_STRUCT_CLK(dss2_alwon_fck, cpefuse_fck_parent_names, aes2_ick_ops); - -static struct clk dss_96m_fck; - -static struct clk_hw_omap dss_96m_fck_hw = { - .hw = { - .clk = &dss_96m_fck, - }, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_TV_SHIFT, - .clkdm_name = "dss_clkdm", -}; - -DEFINE_STRUCT_CLK(dss_96m_fck, core_96m_fck_parent_names, aes2_ick_ops); - -static struct clk dss_ick_3430es1; - -static struct clk_hw_omap dss_ick_3430es1_hw = { - .hw = { - .clk = &dss_ick_3430es1, - }, - .ops = &clkhwops_iclk, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, - .clkdm_name = "dss_clkdm", -}; - -DEFINE_STRUCT_CLK(dss_ick_3430es1, security_l4_ick2_parent_names, aes2_ick_ops); - -static struct clk dss_ick_3430es2; - -static struct clk_hw_omap dss_ick_3430es2_hw = { - .hw = { - .clk = &dss_ick_3430es2, - }, - .ops = &clkhwops_omap3430es2_iclk_dss_usbhost_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, - .clkdm_name = "dss_clkdm", -}; - -DEFINE_STRUCT_CLK(dss_ick_3430es2, security_l4_ick2_parent_names, aes2_ick_ops); - -static struct clk dss_tv_fck; - -static const char *dss_tv_fck_parent_names[] = { - "omap_54m_fck", -}; - -static struct clk_hw_omap dss_tv_fck_hw = { - .hw = { - .clk = &dss_tv_fck, - }, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_TV_SHIFT, - .clkdm_name = "dss_clkdm", -}; - -DEFINE_STRUCT_CLK(dss_tv_fck, dss_tv_fck_parent_names, aes2_ick_ops); - -static struct clk emac_fck; - -static const char *emac_fck_parent_names[] = { - "rmii_ck", -}; - -static struct clk_hw_omap emac_fck_hw = { - .hw = { - .clk = &emac_fck, - }, - .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL), - .enable_bit = AM35XX_CPGMAC_FCLK_SHIFT, -}; - -DEFINE_STRUCT_CLK(emac_fck, emac_fck_parent_names, aes1_ick_ops); - -static struct clk ipss_ick; - -static const char *ipss_ick_parent_names[] = { - "core_l3_ick", -}; - -static struct clk_hw_omap ipss_ick_hw = { - .hw = { - .clk = &ipss_ick, - }, - .ops = &clkhwops_am35xx_ipss_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = AM35XX_EN_IPSS_SHIFT, - .clkdm_name = "core_l3_clkdm", -}; - -DEFINE_STRUCT_CLK(ipss_ick, ipss_ick_parent_names, aes2_ick_ops); - -static struct clk emac_ick; - -static const char *emac_ick_parent_names[] = { - "ipss_ick", -}; - -static struct clk_hw_omap emac_ick_hw = { - .hw = { - .clk = &emac_ick, - }, - .ops = &clkhwops_am35xx_ipss_module_wait, - .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL), - .enable_bit = AM35XX_CPGMAC_VBUSP_CLK_SHIFT, - .clkdm_name = "core_l3_clkdm", -}; - -DEFINE_STRUCT_CLK(emac_ick, emac_ick_parent_names, aes2_ick_ops); - -static struct clk emu_core_alwon_ck; - -static const char *emu_core_alwon_ck_parent_names[] = { - "dpll3_m3x2_ck", -}; - -DEFINE_STRUCT_CLK_HW_OMAP(emu_core_alwon_ck, "dpll3_clkdm"); -DEFINE_STRUCT_CLK(emu_core_alwon_ck, emu_core_alwon_ck_parent_names, - core_l4_ick_ops); - -static struct clk emu_mpu_alwon_ck; - -static const char *emu_mpu_alwon_ck_parent_names[] = { - "mpu_ck", -}; - -DEFINE_STRUCT_CLK_HW_OMAP(emu_mpu_alwon_ck, NULL); -DEFINE_STRUCT_CLK(emu_mpu_alwon_ck, emu_mpu_alwon_ck_parent_names, core_ck_ops); - -static struct clk emu_per_alwon_ck; - -static const char *emu_per_alwon_ck_parent_names[] = { - "dpll4_m6x2_ck", -}; - -DEFINE_STRUCT_CLK_HW_OMAP(emu_per_alwon_ck, "dpll4_clkdm"); -DEFINE_STRUCT_CLK(emu_per_alwon_ck, emu_per_alwon_ck_parent_names, - core_l4_ick_ops); - -static const char *emu_src_ck_parent_names[] = { - "sys_ck", "emu_core_alwon_ck", "emu_per_alwon_ck", "emu_mpu_alwon_ck", -}; - -static const struct clksel_rate emu_src_sys_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_3XXX }, - { .div = 0 }, -}; - -static const struct clksel_rate emu_src_core_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, - { .div = 0 }, -}; - -static const struct clksel_rate emu_src_per_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_3XXX }, - { .div = 0 }, -}; - -static const struct clksel_rate emu_src_mpu_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_3XXX }, - { .div = 0 }, -}; - -static const struct clksel emu_src_clksel[] = { - { .parent = &sys_ck, .rates = emu_src_sys_rates }, - { .parent = &emu_core_alwon_ck, .rates = emu_src_core_rates }, - { .parent = &emu_per_alwon_ck, .rates = emu_src_per_rates }, - { .parent = &emu_mpu_alwon_ck, .rates = emu_src_mpu_rates }, - { .parent = NULL }, -}; - -static const struct clk_ops emu_src_ck_ops = { - .init = &omap2_init_clk_clkdm, - .recalc_rate = &omap2_clksel_recalc, - .get_parent = &omap2_clksel_find_parent_index, - .set_parent = &omap2_clksel_set_parent, - .enable = &omap2_clkops_enable_clkdm, - .disable = &omap2_clkops_disable_clkdm, -}; - -static struct clk emu_src_ck; - -static struct clk_hw_omap emu_src_ck_hw = { - .hw = { - .clk = &emu_src_ck, - }, - .clksel = emu_src_clksel, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_MUX_CTRL_MASK, - .clkdm_name = "emu_clkdm", -}; - -DEFINE_STRUCT_CLK(emu_src_ck, emu_src_ck_parent_names, emu_src_ck_ops); - -DEFINE_CLK_DIVIDER(atclk_fck, "emu_src_ck", &emu_src_ck, 0x0, - OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - OMAP3430_CLKSEL_ATCLK_SHIFT, OMAP3430_CLKSEL_ATCLK_WIDTH, - CLK_DIVIDER_ONE_BASED, NULL); - -static struct clk fac_ick; - -static struct clk_hw_omap fac_ick_hw = { - .hw = { - .clk = &fac_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430ES1_EN_FAC_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(fac_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk fshostusb_fck; - -static const char *fshostusb_fck_parent_names[] = { - "core_48m_fck", -}; - -static struct clk_hw_omap fshostusb_fck_hw = { - .hw = { - .clk = &fshostusb_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(fshostusb_fck, fshostusb_fck_parent_names, aes2_ick_ops); - -static struct clk gfx_l3_ck; - -static struct clk_hw_omap gfx_l3_ck_hw = { - .hw = { - .clk = &gfx_l3_ck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), - .enable_bit = OMAP_EN_GFX_SHIFT, - .clkdm_name = "gfx_3430es1_clkdm", -}; - -DEFINE_STRUCT_CLK(gfx_l3_ck, core_l3_ick_parent_names, aes1_ick_ops); - -DEFINE_CLK_DIVIDER(gfx_l3_fck, "l3_ick", &l3_ick, 0x0, - OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), - OMAP_CLKSEL_GFX_SHIFT, OMAP_CLKSEL_GFX_WIDTH, - CLK_DIVIDER_ONE_BASED, NULL); - -static struct clk gfx_cg1_ck; - -static const char *gfx_cg1_ck_parent_names[] = { - "gfx_l3_fck", -}; - -static struct clk_hw_omap gfx_cg1_ck_hw = { - .hw = { - .clk = &gfx_cg1_ck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES1_EN_2D_SHIFT, - .clkdm_name = "gfx_3430es1_clkdm", -}; - -DEFINE_STRUCT_CLK(gfx_cg1_ck, gfx_cg1_ck_parent_names, aes2_ick_ops); - -static struct clk gfx_cg2_ck; - -static struct clk_hw_omap gfx_cg2_ck_hw = { - .hw = { - .clk = &gfx_cg2_ck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES1_EN_3D_SHIFT, - .clkdm_name = "gfx_3430es1_clkdm", -}; - -DEFINE_STRUCT_CLK(gfx_cg2_ck, gfx_cg1_ck_parent_names, aes2_ick_ops); - -static struct clk gfx_l3_ick; - -static const char *gfx_l3_ick_parent_names[] = { - "gfx_l3_ck", -}; - -DEFINE_STRUCT_CLK_HW_OMAP(gfx_l3_ick, "gfx_3430es1_clkdm"); -DEFINE_STRUCT_CLK(gfx_l3_ick, gfx_l3_ick_parent_names, core_l4_ick_ops); - -static struct clk wkup_32k_fck; - -static const char *wkup_32k_fck_parent_names[] = { - "omap_32k_fck", -}; - -DEFINE_STRUCT_CLK_HW_OMAP(wkup_32k_fck, "wkup_clkdm"); -DEFINE_STRUCT_CLK(wkup_32k_fck, wkup_32k_fck_parent_names, core_l4_ick_ops); - -static struct clk gpio1_dbck; - -static const char *gpio1_dbck_parent_names[] = { - "wkup_32k_fck", -}; - -static struct clk_hw_omap gpio1_dbck_hw = { - .hw = { - .clk = &gpio1_dbck, - }, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO1_SHIFT, - .clkdm_name = "wkup_clkdm", -}; - -DEFINE_STRUCT_CLK(gpio1_dbck, gpio1_dbck_parent_names, aes2_ick_ops); - -static struct clk wkup_l4_ick; - -DEFINE_STRUCT_CLK_HW_OMAP(wkup_l4_ick, "wkup_clkdm"); -DEFINE_STRUCT_CLK(wkup_l4_ick, cpefuse_fck_parent_names, core_l4_ick_ops); - -static struct clk gpio1_ick; - -static const char *gpio1_ick_parent_names[] = { - "wkup_l4_ick", -}; - -static struct clk_hw_omap gpio1_ick_hw = { - .hw = { - .clk = &gpio1_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO1_SHIFT, - .clkdm_name = "wkup_clkdm", -}; - -DEFINE_STRUCT_CLK(gpio1_ick, gpio1_ick_parent_names, aes2_ick_ops); - -static struct clk per_32k_alwon_fck; - -DEFINE_STRUCT_CLK_HW_OMAP(per_32k_alwon_fck, "per_clkdm"); -DEFINE_STRUCT_CLK(per_32k_alwon_fck, wkup_32k_fck_parent_names, - core_l4_ick_ops); - -static struct clk gpio2_dbck; - -static const char *gpio2_dbck_parent_names[] = { - "per_32k_alwon_fck", -}; - -static struct clk_hw_omap gpio2_dbck_hw = { - .hw = { - .clk = &gpio2_dbck, - }, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO2_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(gpio2_dbck, gpio2_dbck_parent_names, aes2_ick_ops); - -static struct clk per_l4_ick; - -DEFINE_STRUCT_CLK_HW_OMAP(per_l4_ick, "per_clkdm"); -DEFINE_STRUCT_CLK(per_l4_ick, security_l4_ick2_parent_names, core_l4_ick_ops); - -static struct clk gpio2_ick; - -static const char *gpio2_ick_parent_names[] = { - "per_l4_ick", -}; - -static struct clk_hw_omap gpio2_ick_hw = { - .hw = { - .clk = &gpio2_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO2_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(gpio2_ick, gpio2_ick_parent_names, aes2_ick_ops); - -static struct clk gpio3_dbck; - -static struct clk_hw_omap gpio3_dbck_hw = { - .hw = { - .clk = &gpio3_dbck, - }, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO3_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(gpio3_dbck, gpio2_dbck_parent_names, aes2_ick_ops); - -static struct clk gpio3_ick; - -static struct clk_hw_omap gpio3_ick_hw = { - .hw = { - .clk = &gpio3_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO3_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(gpio3_ick, gpio2_ick_parent_names, aes2_ick_ops); - -static struct clk gpio4_dbck; - -static struct clk_hw_omap gpio4_dbck_hw = { - .hw = { - .clk = &gpio4_dbck, - }, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO4_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(gpio4_dbck, gpio2_dbck_parent_names, aes2_ick_ops); - -static struct clk gpio4_ick; - -static struct clk_hw_omap gpio4_ick_hw = { - .hw = { - .clk = &gpio4_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO4_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(gpio4_ick, gpio2_ick_parent_names, aes2_ick_ops); - -static struct clk gpio5_dbck; - -static struct clk_hw_omap gpio5_dbck_hw = { - .hw = { - .clk = &gpio5_dbck, - }, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO5_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(gpio5_dbck, gpio2_dbck_parent_names, aes2_ick_ops); - -static struct clk gpio5_ick; - -static struct clk_hw_omap gpio5_ick_hw = { - .hw = { - .clk = &gpio5_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO5_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(gpio5_ick, gpio2_ick_parent_names, aes2_ick_ops); - -static struct clk gpio6_dbck; - -static struct clk_hw_omap gpio6_dbck_hw = { - .hw = { - .clk = &gpio6_dbck, - }, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO6_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(gpio6_dbck, gpio2_dbck_parent_names, aes2_ick_ops); - -static struct clk gpio6_ick; - -static struct clk_hw_omap gpio6_ick_hw = { - .hw = { - .clk = &gpio6_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO6_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(gpio6_ick, gpio2_ick_parent_names, aes2_ick_ops); - -static struct clk gpmc_fck; - -static struct clk_hw_omap gpmc_fck_hw = { - .hw = { - .clk = &gpmc_fck, - }, - .flags = ENABLE_ON_INIT, - .clkdm_name = "core_l3_clkdm", -}; - -DEFINE_STRUCT_CLK(gpmc_fck, ipss_ick_parent_names, core_l4_ick_ops); - -static const struct clksel omap343x_gpt_clksel[] = { - { .parent = &omap_32k_fck, .rates = gpt_32k_rates }, - { .parent = &sys_ck, .rates = gpt_sys_rates }, - { .parent = NULL }, -}; - -static const char *gpt10_fck_parent_names[] = { - "omap_32k_fck", "sys_ck", -}; - -DEFINE_CLK_OMAP_MUX_GATE(gpt10_fck, "core_l4_clkdm", omap343x_gpt_clksel, - OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - OMAP3430_CLKSEL_GPT10_MASK, - OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - OMAP3430_EN_GPT10_SHIFT, &clkhwops_wait, - gpt10_fck_parent_names, clkout2_src_ck_ops); - -static struct clk gpt10_ick; - -static struct clk_hw_omap gpt10_ick_hw = { - .hw = { - .clk = &gpt10_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_GPT10_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(gpt10_ick, aes2_ick_parent_names, aes2_ick_ops); - -DEFINE_CLK_OMAP_MUX_GATE(gpt11_fck, "core_l4_clkdm", omap343x_gpt_clksel, - OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - OMAP3430_CLKSEL_GPT11_MASK, - OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - OMAP3430_EN_GPT11_SHIFT, &clkhwops_wait, - gpt10_fck_parent_names, clkout2_src_ck_ops); - -static struct clk gpt11_ick; - -static struct clk_hw_omap gpt11_ick_hw = { - .hw = { - .clk = &gpt11_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_GPT11_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(gpt11_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk gpt12_fck; - -static const char *gpt12_fck_parent_names[] = { - "secure_32k_fck", -}; - -DEFINE_STRUCT_CLK_HW_OMAP(gpt12_fck, "wkup_clkdm"); -DEFINE_STRUCT_CLK(gpt12_fck, gpt12_fck_parent_names, core_l4_ick_ops); - -static struct clk gpt12_ick; - -static struct clk_hw_omap gpt12_ick_hw = { - .hw = { - .clk = &gpt12_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT12_SHIFT, - .clkdm_name = "wkup_clkdm", -}; - -DEFINE_STRUCT_CLK(gpt12_ick, gpio1_ick_parent_names, aes2_ick_ops); - -DEFINE_CLK_OMAP_MUX_GATE(gpt1_fck, "wkup_clkdm", omap343x_gpt_clksel, - OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), - OMAP3430_CLKSEL_GPT1_MASK, - OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - OMAP3430_EN_GPT1_SHIFT, &clkhwops_wait, - gpt10_fck_parent_names, clkout2_src_ck_ops); - -static struct clk gpt1_ick; - -static struct clk_hw_omap gpt1_ick_hw = { - .hw = { - .clk = &gpt1_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT1_SHIFT, - .clkdm_name = "wkup_clkdm", -}; - -DEFINE_STRUCT_CLK(gpt1_ick, gpio1_ick_parent_names, aes2_ick_ops); - -DEFINE_CLK_OMAP_MUX_GATE(gpt2_fck, "per_clkdm", omap343x_gpt_clksel, - OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - OMAP3430_CLKSEL_GPT2_MASK, - OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - OMAP3430_EN_GPT2_SHIFT, &clkhwops_wait, - gpt10_fck_parent_names, clkout2_src_ck_ops); - -static struct clk gpt2_ick; - -static struct clk_hw_omap gpt2_ick_hw = { - .hw = { - .clk = &gpt2_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT2_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(gpt2_ick, gpio2_ick_parent_names, aes2_ick_ops); - -DEFINE_CLK_OMAP_MUX_GATE(gpt3_fck, "per_clkdm", omap343x_gpt_clksel, - OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - OMAP3430_CLKSEL_GPT3_MASK, - OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - OMAP3430_EN_GPT3_SHIFT, &clkhwops_wait, - gpt10_fck_parent_names, clkout2_src_ck_ops); - -static struct clk gpt3_ick; - -static struct clk_hw_omap gpt3_ick_hw = { - .hw = { - .clk = &gpt3_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT3_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(gpt3_ick, gpio2_ick_parent_names, aes2_ick_ops); - -DEFINE_CLK_OMAP_MUX_GATE(gpt4_fck, "per_clkdm", omap343x_gpt_clksel, - OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - OMAP3430_CLKSEL_GPT4_MASK, - OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - OMAP3430_EN_GPT4_SHIFT, &clkhwops_wait, - gpt10_fck_parent_names, clkout2_src_ck_ops); - -static struct clk gpt4_ick; - -static struct clk_hw_omap gpt4_ick_hw = { - .hw = { - .clk = &gpt4_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT4_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(gpt4_ick, gpio2_ick_parent_names, aes2_ick_ops); - -DEFINE_CLK_OMAP_MUX_GATE(gpt5_fck, "per_clkdm", omap343x_gpt_clksel, - OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - OMAP3430_CLKSEL_GPT5_MASK, - OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - OMAP3430_EN_GPT5_SHIFT, &clkhwops_wait, - gpt10_fck_parent_names, clkout2_src_ck_ops); - -static struct clk gpt5_ick; - -static struct clk_hw_omap gpt5_ick_hw = { - .hw = { - .clk = &gpt5_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT5_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(gpt5_ick, gpio2_ick_parent_names, aes2_ick_ops); - -DEFINE_CLK_OMAP_MUX_GATE(gpt6_fck, "per_clkdm", omap343x_gpt_clksel, - OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - OMAP3430_CLKSEL_GPT6_MASK, - OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - OMAP3430_EN_GPT6_SHIFT, &clkhwops_wait, - gpt10_fck_parent_names, clkout2_src_ck_ops); - -static struct clk gpt6_ick; - -static struct clk_hw_omap gpt6_ick_hw = { - .hw = { - .clk = &gpt6_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT6_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(gpt6_ick, gpio2_ick_parent_names, aes2_ick_ops); - -DEFINE_CLK_OMAP_MUX_GATE(gpt7_fck, "per_clkdm", omap343x_gpt_clksel, - OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - OMAP3430_CLKSEL_GPT7_MASK, - OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - OMAP3430_EN_GPT7_SHIFT, &clkhwops_wait, - gpt10_fck_parent_names, clkout2_src_ck_ops); - -static struct clk gpt7_ick; - -static struct clk_hw_omap gpt7_ick_hw = { - .hw = { - .clk = &gpt7_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT7_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(gpt7_ick, gpio2_ick_parent_names, aes2_ick_ops); - -DEFINE_CLK_OMAP_MUX_GATE(gpt8_fck, "per_clkdm", omap343x_gpt_clksel, - OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - OMAP3430_CLKSEL_GPT8_MASK, - OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - OMAP3430_EN_GPT8_SHIFT, &clkhwops_wait, - gpt10_fck_parent_names, clkout2_src_ck_ops); - -static struct clk gpt8_ick; - -static struct clk_hw_omap gpt8_ick_hw = { - .hw = { - .clk = &gpt8_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT8_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(gpt8_ick, gpio2_ick_parent_names, aes2_ick_ops); - -DEFINE_CLK_OMAP_MUX_GATE(gpt9_fck, "per_clkdm", omap343x_gpt_clksel, - OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - OMAP3430_CLKSEL_GPT9_MASK, - OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - OMAP3430_EN_GPT9_SHIFT, &clkhwops_wait, - gpt10_fck_parent_names, clkout2_src_ck_ops); - -static struct clk gpt9_ick; - -static struct clk_hw_omap gpt9_ick_hw = { - .hw = { - .clk = &gpt9_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT9_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(gpt9_ick, gpio2_ick_parent_names, aes2_ick_ops); - -static struct clk hdq_fck; - -static const char *hdq_fck_parent_names[] = { - "core_12m_fck", -}; - -static struct clk_hw_omap hdq_fck_hw = { - .hw = { - .clk = &hdq_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_HDQ_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(hdq_fck, hdq_fck_parent_names, aes2_ick_ops); - -static struct clk hdq_ick; - -static struct clk_hw_omap hdq_ick_hw = { - .hw = { - .clk = &hdq_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_HDQ_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(hdq_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk hecc_ck; - -static struct clk_hw_omap hecc_ck_hw = { - .hw = { - .clk = &hecc_ck, - }, - .ops = &clkhwops_am35xx_ipss_module_wait, - .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL), - .enable_bit = AM35XX_HECC_VBUSP_CLK_SHIFT, - .clkdm_name = "core_l3_clkdm", -}; - -DEFINE_STRUCT_CLK(hecc_ck, cpefuse_fck_parent_names, aes2_ick_ops); - -static struct clk hsotgusb_fck_am35xx; - -static struct clk_hw_omap hsotgusb_fck_am35xx_hw = { - .hw = { - .clk = &hsotgusb_fck_am35xx, - }, - .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL), - .enable_bit = AM35XX_USBOTG_FCLK_SHIFT, - .clkdm_name = "core_l3_clkdm", -}; - -DEFINE_STRUCT_CLK(hsotgusb_fck_am35xx, cpefuse_fck_parent_names, aes2_ick_ops); - -static struct clk hsotgusb_ick_3430es1; - -static struct clk_hw_omap hsotgusb_ick_3430es1_hw = { - .hw = { - .clk = &hsotgusb_ick_3430es1, - }, - .ops = &clkhwops_iclk, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, - .clkdm_name = "core_l3_clkdm", -}; - -DEFINE_STRUCT_CLK(hsotgusb_ick_3430es1, ipss_ick_parent_names, aes2_ick_ops); - -static struct clk hsotgusb_ick_3430es2; - -static struct clk_hw_omap hsotgusb_ick_3430es2_hw = { - .hw = { - .clk = &hsotgusb_ick_3430es2, - }, - .ops = &clkhwops_omap3430es2_iclk_hsotgusb_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, - .clkdm_name = "core_l3_clkdm", -}; - -DEFINE_STRUCT_CLK(hsotgusb_ick_3430es2, ipss_ick_parent_names, aes2_ick_ops); - -static struct clk hsotgusb_ick_am35xx; - -static struct clk_hw_omap hsotgusb_ick_am35xx_hw = { - .hw = { - .clk = &hsotgusb_ick_am35xx, - }, - .ops = &clkhwops_am35xx_ipss_module_wait, - .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL), - .enable_bit = AM35XX_USBOTG_VBUSP_CLK_SHIFT, - .clkdm_name = "core_l3_clkdm", -}; - -DEFINE_STRUCT_CLK(hsotgusb_ick_am35xx, emac_ick_parent_names, aes2_ick_ops); - -static struct clk i2c1_fck; - -static struct clk_hw_omap i2c1_fck_hw = { - .hw = { - .clk = &i2c1_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_I2C1_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(i2c1_fck, csi2_96m_fck_parent_names, aes2_ick_ops); - -static struct clk i2c1_ick; - -static struct clk_hw_omap i2c1_ick_hw = { - .hw = { - .clk = &i2c1_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_I2C1_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(i2c1_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk i2c2_fck; - -static struct clk_hw_omap i2c2_fck_hw = { - .hw = { - .clk = &i2c2_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_I2C2_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(i2c2_fck, csi2_96m_fck_parent_names, aes2_ick_ops); - -static struct clk i2c2_ick; - -static struct clk_hw_omap i2c2_ick_hw = { - .hw = { - .clk = &i2c2_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_I2C2_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(i2c2_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk i2c3_fck; - -static struct clk_hw_omap i2c3_fck_hw = { - .hw = { - .clk = &i2c3_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_I2C3_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(i2c3_fck, csi2_96m_fck_parent_names, aes2_ick_ops); - -static struct clk i2c3_ick; - -static struct clk_hw_omap i2c3_ick_hw = { - .hw = { - .clk = &i2c3_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_I2C3_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(i2c3_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk icr_ick; - -static struct clk_hw_omap icr_ick_hw = { - .hw = { - .clk = &icr_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_ICR_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(icr_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk iva2_ck; - -static const char *iva2_ck_parent_names[] = { - "dpll2_m2_ck", -}; - -static struct clk_hw_omap iva2_ck_hw = { - .hw = { - .clk = &iva2_ck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT, - .clkdm_name = "iva2_clkdm", -}; - -DEFINE_STRUCT_CLK(iva2_ck, iva2_ck_parent_names, aes2_ick_ops); - -static struct clk mad2d_ick; - -static struct clk_hw_omap mad2d_ick_hw = { - .hw = { - .clk = &mad2d_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), - .enable_bit = OMAP3430_EN_MAD2D_SHIFT, - .clkdm_name = "d2d_clkdm", -}; - -DEFINE_STRUCT_CLK(mad2d_ick, core_l3_ick_parent_names, aes2_ick_ops); - -static struct clk mailboxes_ick; - -static struct clk_hw_omap mailboxes_ick_hw = { - .hw = { - .clk = &mailboxes_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MAILBOXES_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(mailboxes_ick, aes2_ick_parent_names, aes2_ick_ops); - -static const struct clksel_rate common_mcbsp_96m_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_3XXX }, - { .div = 0 } -}; - -static const struct clksel_rate common_mcbsp_mcbsp_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, - { .div = 0 } -}; - -static const struct clksel mcbsp_15_clksel[] = { - { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates }, - { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, - { .parent = NULL }, -}; - -static const char *mcbsp1_fck_parent_names[] = { - "core_96m_fck", "mcbsp_clks", -}; - -DEFINE_CLK_OMAP_MUX_GATE(mcbsp1_fck, "core_l4_clkdm", mcbsp_15_clksel, - OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), - OMAP2_MCBSP1_CLKS_MASK, - OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - OMAP3430_EN_MCBSP1_SHIFT, &clkhwops_wait, - mcbsp1_fck_parent_names, clkout2_src_ck_ops); - -static struct clk mcbsp1_ick; - -static struct clk_hw_omap mcbsp1_ick_hw = { - .hw = { - .clk = &mcbsp1_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCBSP1_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(mcbsp1_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk per_96m_fck; - -DEFINE_STRUCT_CLK_HW_OMAP(per_96m_fck, "per_clkdm"); -DEFINE_STRUCT_CLK(per_96m_fck, cm_96m_fck_parent_names, core_l4_ick_ops); - -static const struct clksel mcbsp_234_clksel[] = { - { .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates }, - { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, - { .parent = NULL }, -}; - -static const char *mcbsp2_fck_parent_names[] = { - "per_96m_fck", "mcbsp_clks", -}; - -DEFINE_CLK_OMAP_MUX_GATE(mcbsp2_fck, "per_clkdm", mcbsp_234_clksel, - OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), - OMAP2_MCBSP2_CLKS_MASK, - OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - OMAP3430_EN_MCBSP2_SHIFT, &clkhwops_wait, - mcbsp2_fck_parent_names, clkout2_src_ck_ops); - -static struct clk mcbsp2_ick; - -static struct clk_hw_omap mcbsp2_ick_hw = { - .hw = { - .clk = &mcbsp2_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_MCBSP2_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(mcbsp2_ick, gpio2_ick_parent_names, aes2_ick_ops); - -DEFINE_CLK_OMAP_MUX_GATE(mcbsp3_fck, "per_clkdm", mcbsp_234_clksel, - OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), - OMAP2_MCBSP3_CLKS_MASK, - OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - OMAP3430_EN_MCBSP3_SHIFT, &clkhwops_wait, - mcbsp2_fck_parent_names, clkout2_src_ck_ops); - -static struct clk mcbsp3_ick; - -static struct clk_hw_omap mcbsp3_ick_hw = { - .hw = { - .clk = &mcbsp3_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_MCBSP3_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(mcbsp3_ick, gpio2_ick_parent_names, aes2_ick_ops); - -DEFINE_CLK_OMAP_MUX_GATE(mcbsp4_fck, "per_clkdm", mcbsp_234_clksel, - OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), - OMAP2_MCBSP4_CLKS_MASK, - OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - OMAP3430_EN_MCBSP4_SHIFT, &clkhwops_wait, - mcbsp2_fck_parent_names, clkout2_src_ck_ops); - -static struct clk mcbsp4_ick; - -static struct clk_hw_omap mcbsp4_ick_hw = { - .hw = { - .clk = &mcbsp4_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_MCBSP4_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(mcbsp4_ick, gpio2_ick_parent_names, aes2_ick_ops); - -DEFINE_CLK_OMAP_MUX_GATE(mcbsp5_fck, "core_l4_clkdm", mcbsp_15_clksel, - OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), - OMAP2_MCBSP5_CLKS_MASK, - OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - OMAP3430_EN_MCBSP5_SHIFT, &clkhwops_wait, - mcbsp1_fck_parent_names, clkout2_src_ck_ops); - -static struct clk mcbsp5_ick; - -static struct clk_hw_omap mcbsp5_ick_hw = { - .hw = { - .clk = &mcbsp5_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCBSP5_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(mcbsp5_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk mcspi1_fck; - -static struct clk_hw_omap mcspi1_fck_hw = { - .hw = { - .clk = &mcspi1_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(mcspi1_fck, fshostusb_fck_parent_names, aes2_ick_ops); - -static struct clk mcspi1_ick; - -static struct clk_hw_omap mcspi1_ick_hw = { - .hw = { - .clk = &mcspi1_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(mcspi1_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk mcspi2_fck; - -static struct clk_hw_omap mcspi2_fck_hw = { - .hw = { - .clk = &mcspi2_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(mcspi2_fck, fshostusb_fck_parent_names, aes2_ick_ops); - -static struct clk mcspi2_ick; - -static struct clk_hw_omap mcspi2_ick_hw = { - .hw = { - .clk = &mcspi2_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(mcspi2_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk mcspi3_fck; - -static struct clk_hw_omap mcspi3_fck_hw = { - .hw = { - .clk = &mcspi3_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(mcspi3_fck, fshostusb_fck_parent_names, aes2_ick_ops); - -static struct clk mcspi3_ick; - -static struct clk_hw_omap mcspi3_ick_hw = { - .hw = { - .clk = &mcspi3_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(mcspi3_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk mcspi4_fck; - -static struct clk_hw_omap mcspi4_fck_hw = { - .hw = { - .clk = &mcspi4_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(mcspi4_fck, fshostusb_fck_parent_names, aes2_ick_ops); - -static struct clk mcspi4_ick; - -static struct clk_hw_omap mcspi4_ick_hw = { - .hw = { - .clk = &mcspi4_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(mcspi4_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk mmchs1_fck; - -static struct clk_hw_omap mmchs1_fck_hw = { - .hw = { - .clk = &mmchs1_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MMC1_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(mmchs1_fck, csi2_96m_fck_parent_names, aes2_ick_ops); - -static struct clk mmchs1_ick; - -static struct clk_hw_omap mmchs1_ick_hw = { - .hw = { - .clk = &mmchs1_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MMC1_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(mmchs1_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk mmchs2_fck; - -static struct clk_hw_omap mmchs2_fck_hw = { - .hw = { - .clk = &mmchs2_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MMC2_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(mmchs2_fck, csi2_96m_fck_parent_names, aes2_ick_ops); - -static struct clk mmchs2_ick; - -static struct clk_hw_omap mmchs2_ick_hw = { - .hw = { - .clk = &mmchs2_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MMC2_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(mmchs2_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk mmchs3_fck; - -static struct clk_hw_omap mmchs3_fck_hw = { - .hw = { - .clk = &mmchs3_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(mmchs3_fck, csi2_96m_fck_parent_names, aes2_ick_ops); - -static struct clk mmchs3_ick; - -static struct clk_hw_omap mmchs3_ick_hw = { - .hw = { - .clk = &mmchs3_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(mmchs3_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk modem_fck; - -static struct clk_hw_omap modem_fck_hw = { - .hw = { - .clk = &modem_fck, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MODEM_SHIFT, - .clkdm_name = "d2d_clkdm", -}; - -DEFINE_STRUCT_CLK(modem_fck, cpefuse_fck_parent_names, aes2_ick_ops); - -static struct clk mspro_fck; - -static struct clk_hw_omap mspro_fck_hw = { - .hw = { - .clk = &mspro_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MSPRO_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(mspro_fck, csi2_96m_fck_parent_names, aes2_ick_ops); - -static struct clk mspro_ick; - -static struct clk_hw_omap mspro_ick_hw = { - .hw = { - .clk = &mspro_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MSPRO_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(mspro_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk omap_192m_alwon_fck; - -DEFINE_STRUCT_CLK_HW_OMAP(omap_192m_alwon_fck, NULL); -DEFINE_STRUCT_CLK(omap_192m_alwon_fck, omap_96m_alwon_fck_parent_names, - core_ck_ops); - -static struct clk omap_32ksync_ick; - -static struct clk_hw_omap omap_32ksync_ick_hw = { - .hw = { - .clk = &omap_32ksync_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_32KSYNC_SHIFT, - .clkdm_name = "wkup_clkdm", -}; - -DEFINE_STRUCT_CLK(omap_32ksync_ick, gpio1_ick_parent_names, aes2_ick_ops); - -static const struct clksel_rate omap_96m_alwon_fck_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_36XX }, - { .div = 2, .val = 2, .flags = RATE_IN_36XX }, - { .div = 0 } -}; - -static const struct clksel omap_96m_alwon_fck_clksel[] = { - { .parent = &omap_192m_alwon_fck, .rates = omap_96m_alwon_fck_rates }, - { .parent = NULL } -}; - -static struct clk omap_96m_alwon_fck_3630; - -static const char *omap_96m_alwon_fck_3630_parent_names[] = { - "omap_192m_alwon_fck", -}; - -static const struct clk_ops omap_96m_alwon_fck_3630_ops = { - .set_rate = &omap2_clksel_set_rate, - .recalc_rate = &omap2_clksel_recalc, - .round_rate = &omap2_clksel_round_rate, -}; - -static struct clk_hw_omap omap_96m_alwon_fck_3630_hw = { - .hw = { - .clk = &omap_96m_alwon_fck_3630, - }, - .clksel = omap_96m_alwon_fck_clksel, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3630_CLKSEL_96M_MASK, -}; - -static struct clk omap_96m_alwon_fck_3630 = { - .name = "omap_96m_alwon_fck", - .hw = &omap_96m_alwon_fck_3630_hw.hw, - .parent_names = omap_96m_alwon_fck_3630_parent_names, - .num_parents = ARRAY_SIZE(omap_96m_alwon_fck_3630_parent_names), - .ops = &omap_96m_alwon_fck_3630_ops, -}; - -static struct clk omapctrl_ick; - -static struct clk_hw_omap omapctrl_ick_hw = { - .hw = { - .clk = &omapctrl_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_OMAPCTRL_SHIFT, - .flags = ENABLE_ON_INIT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(omapctrl_ick, aes2_ick_parent_names, aes2_ick_ops); - -DEFINE_CLK_DIVIDER(pclk_fck, "emu_src_ck", &emu_src_ck, 0x0, - OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - OMAP3430_CLKSEL_PCLK_SHIFT, OMAP3430_CLKSEL_PCLK_WIDTH, - CLK_DIVIDER_ONE_BASED, NULL); - -DEFINE_CLK_DIVIDER(pclkx2_fck, "emu_src_ck", &emu_src_ck, 0x0, - OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - OMAP3430_CLKSEL_PCLKX2_SHIFT, OMAP3430_CLKSEL_PCLKX2_WIDTH, - CLK_DIVIDER_ONE_BASED, NULL); - -static struct clk per_48m_fck; - -DEFINE_STRUCT_CLK_HW_OMAP(per_48m_fck, "per_clkdm"); -DEFINE_STRUCT_CLK(per_48m_fck, core_48m_fck_parent_names, core_l4_ick_ops); - -static struct clk security_l3_ick; - -DEFINE_STRUCT_CLK_HW_OMAP(security_l3_ick, NULL); -DEFINE_STRUCT_CLK(security_l3_ick, core_l3_ick_parent_names, core_ck_ops); - -static struct clk pka_ick; - -static const char *pka_ick_parent_names[] = { - "security_l3_ick", -}; - -static struct clk_hw_omap pka_ick_hw = { - .hw = { - .clk = &pka_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP3430_EN_PKA_SHIFT, -}; - -DEFINE_STRUCT_CLK(pka_ick, pka_ick_parent_names, aes1_ick_ops); - -DEFINE_CLK_DIVIDER(rm_ick, "l4_ick", &l4_ick, 0x0, - OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), - OMAP3430_CLKSEL_RM_SHIFT, OMAP3430_CLKSEL_RM_WIDTH, - CLK_DIVIDER_ONE_BASED, NULL); - -static struct clk rng_ick; - -static struct clk_hw_omap rng_ick_hw = { - .hw = { - .clk = &rng_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP3430_EN_RNG_SHIFT, -}; - -DEFINE_STRUCT_CLK(rng_ick, aes1_ick_parent_names, aes1_ick_ops); - -static struct clk sad2d_ick; - -static struct clk_hw_omap sad2d_ick_hw = { - .hw = { - .clk = &sad2d_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_SAD2D_SHIFT, - .clkdm_name = "d2d_clkdm", -}; - -DEFINE_STRUCT_CLK(sad2d_ick, core_l3_ick_parent_names, aes2_ick_ops); - -static struct clk sdrc_ick; - -static struct clk_hw_omap sdrc_ick_hw = { - .hw = { - .clk = &sdrc_ick, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_SDRC_SHIFT, - .flags = ENABLE_ON_INIT, - .clkdm_name = "core_l3_clkdm", -}; - -DEFINE_STRUCT_CLK(sdrc_ick, ipss_ick_parent_names, aes2_ick_ops); - -static const struct clksel_rate sgx_core_rates[] = { - { .div = 2, .val = 5, .flags = RATE_IN_36XX }, - { .div = 3, .val = 0, .flags = RATE_IN_3XXX }, - { .div = 4, .val = 1, .flags = RATE_IN_3XXX }, - { .div = 6, .val = 2, .flags = RATE_IN_3XXX }, - { .div = 0 } -}; - -static const struct clksel_rate sgx_96m_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_3XXX }, - { .div = 0 } -}; - -static const struct clksel_rate sgx_192m_rates[] = { - { .div = 1, .val = 4, .flags = RATE_IN_36XX }, - { .div = 0 } -}; - -static const struct clksel_rate sgx_corex2_rates[] = { - { .div = 3, .val = 6, .flags = RATE_IN_36XX }, - { .div = 5, .val = 7, .flags = RATE_IN_36XX }, - { .div = 0 } -}; - -static const struct clksel sgx_clksel[] = { - { .parent = &core_ck, .rates = sgx_core_rates }, - { .parent = &cm_96m_fck, .rates = sgx_96m_rates }, - { .parent = &omap_192m_alwon_fck, .rates = sgx_192m_rates }, - { .parent = &corex2_fck, .rates = sgx_corex2_rates }, - { .parent = NULL }, -}; - -static const char *sgx_fck_parent_names[] = { - "core_ck", "cm_96m_fck", "omap_192m_alwon_fck", "corex2_fck", -}; - -static struct clk sgx_fck; - -static const struct clk_ops sgx_fck_ops = { - .init = &omap2_init_clk_clkdm, - .enable = &omap2_dflt_clk_enable, - .disable = &omap2_dflt_clk_disable, - .is_enabled = &omap2_dflt_clk_is_enabled, - .recalc_rate = &omap2_clksel_recalc, - .set_rate = &omap2_clksel_set_rate, - .round_rate = &omap2_clksel_round_rate, - .get_parent = &omap2_clksel_find_parent_index, - .set_parent = &omap2_clksel_set_parent, -}; - -DEFINE_CLK_OMAP_MUX_GATE(sgx_fck, "sgx_clkdm", sgx_clksel, - OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL), - OMAP3430ES2_CLKSEL_SGX_MASK, - OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN), - OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT, - &clkhwops_wait, sgx_fck_parent_names, sgx_fck_ops); - -static struct clk sgx_ick; - -static struct clk_hw_omap sgx_ick_hw = { - .hw = { - .clk = &sgx_ick, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN), - .enable_bit = OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT, - .clkdm_name = "sgx_clkdm", -}; - -DEFINE_STRUCT_CLK(sgx_ick, core_l3_ick_parent_names, aes2_ick_ops); - -static struct clk sha11_ick; - -static struct clk_hw_omap sha11_ick_hw = { - .hw = { - .clk = &sha11_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP3430_EN_SHA11_SHIFT, -}; - -DEFINE_STRUCT_CLK(sha11_ick, aes1_ick_parent_names, aes1_ick_ops); - -static struct clk sha12_ick; - -static struct clk_hw_omap sha12_ick_hw = { - .hw = { - .clk = &sha12_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_SHA12_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(sha12_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk sr1_fck; - -static struct clk_hw_omap sr1_fck_hw = { - .hw = { - .clk = &sr1_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_SR1_SHIFT, - .clkdm_name = "wkup_clkdm", -}; - -DEFINE_STRUCT_CLK(sr1_fck, cpefuse_fck_parent_names, aes2_ick_ops); - -static struct clk sr2_fck; - -static struct clk_hw_omap sr2_fck_hw = { - .hw = { - .clk = &sr2_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_SR2_SHIFT, - .clkdm_name = "wkup_clkdm", -}; - -DEFINE_STRUCT_CLK(sr2_fck, cpefuse_fck_parent_names, aes2_ick_ops); - -static struct clk sr_l4_ick; - -DEFINE_STRUCT_CLK_HW_OMAP(sr_l4_ick, "core_l4_clkdm"); -DEFINE_STRUCT_CLK(sr_l4_ick, security_l4_ick2_parent_names, core_l4_ick_ops); - -static struct clk ssi_l4_ick; - -DEFINE_STRUCT_CLK_HW_OMAP(ssi_l4_ick, "core_l4_clkdm"); -DEFINE_STRUCT_CLK(ssi_l4_ick, security_l4_ick2_parent_names, core_l4_ick_ops); - -static struct clk ssi_ick_3430es1; - -static const char *ssi_ick_3430es1_parent_names[] = { - "ssi_l4_ick", -}; - -static struct clk_hw_omap ssi_ick_3430es1_hw = { - .hw = { - .clk = &ssi_ick_3430es1, - }, - .ops = &clkhwops_iclk, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_SSI_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(ssi_ick_3430es1, ssi_ick_3430es1_parent_names, aes2_ick_ops); - -static struct clk ssi_ick_3430es2; - -static struct clk_hw_omap ssi_ick_3430es2_hw = { - .hw = { - .clk = &ssi_ick_3430es2, - }, - .ops = &clkhwops_omap3430es2_iclk_ssi_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_SSI_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(ssi_ick_3430es2, ssi_ick_3430es1_parent_names, aes2_ick_ops); - -static const struct clksel_rate ssi_ssr_corex2_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, - { .div = 2, .val = 2, .flags = RATE_IN_3XXX }, - { .div = 3, .val = 3, .flags = RATE_IN_3XXX }, - { .div = 4, .val = 4, .flags = RATE_IN_3XXX }, - { .div = 6, .val = 6, .flags = RATE_IN_3XXX }, - { .div = 8, .val = 8, .flags = RATE_IN_3XXX }, - { .div = 0 } -}; - -static const struct clksel ssi_ssr_clksel[] = { - { .parent = &corex2_fck, .rates = ssi_ssr_corex2_rates }, - { .parent = NULL }, -}; - -static const char *ssi_ssr_fck_3430es1_parent_names[] = { - "corex2_fck", -}; - -static const struct clk_ops ssi_ssr_fck_3430es1_ops = { - .init = &omap2_init_clk_clkdm, - .enable = &omap2_dflt_clk_enable, - .disable = &omap2_dflt_clk_disable, - .is_enabled = &omap2_dflt_clk_is_enabled, - .recalc_rate = &omap2_clksel_recalc, - .set_rate = &omap2_clksel_set_rate, - .round_rate = &omap2_clksel_round_rate, -}; - -DEFINE_CLK_OMAP_MUX_GATE(ssi_ssr_fck_3430es1, "core_l4_clkdm", - ssi_ssr_clksel, OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - OMAP3430_CLKSEL_SSI_MASK, - OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - OMAP3430_EN_SSI_SHIFT, - NULL, ssi_ssr_fck_3430es1_parent_names, - ssi_ssr_fck_3430es1_ops); - -DEFINE_CLK_OMAP_MUX_GATE(ssi_ssr_fck_3430es2, "core_l4_clkdm", - ssi_ssr_clksel, OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - OMAP3430_CLKSEL_SSI_MASK, - OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - OMAP3430_EN_SSI_SHIFT, - NULL, ssi_ssr_fck_3430es1_parent_names, - ssi_ssr_fck_3430es1_ops); - -DEFINE_CLK_FIXED_FACTOR(ssi_sst_fck_3430es1, "ssi_ssr_fck_3430es1", - &ssi_ssr_fck_3430es1, 0x0, 1, 2); - -DEFINE_CLK_FIXED_FACTOR(ssi_sst_fck_3430es2, "ssi_ssr_fck_3430es2", - &ssi_ssr_fck_3430es2, 0x0, 1, 2); - -static struct clk sys_clkout1; - -static const char *sys_clkout1_parent_names[] = { - "osc_sys_ck", -}; - -static struct clk_hw_omap sys_clkout1_hw = { - .hw = { - .clk = &sys_clkout1, - }, - .enable_reg = OMAP3430_PRM_CLKOUT_CTRL, - .enable_bit = OMAP3430_CLKOUT_EN_SHIFT, -}; - -DEFINE_STRUCT_CLK(sys_clkout1, sys_clkout1_parent_names, aes1_ick_ops); - -DEFINE_CLK_DIVIDER(sys_clkout2, "clkout2_src_ck", &clkout2_src_ck, 0x0, - OMAP3430_CM_CLKOUT_CTRL, OMAP3430_CLKOUT2_DIV_SHIFT, - OMAP3430_CLKOUT2_DIV_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL); - -DEFINE_CLK_MUX(traceclk_src_fck, emu_src_ck_parent_names, NULL, 0x0, - OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - OMAP3430_TRACE_MUX_CTRL_SHIFT, OMAP3430_TRACE_MUX_CTRL_WIDTH, - 0x0, NULL); - -DEFINE_CLK_DIVIDER(traceclk_fck, "traceclk_src_fck", &traceclk_src_fck, 0x0, - OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - OMAP3430_CLKSEL_TRACECLK_SHIFT, - OMAP3430_CLKSEL_TRACECLK_WIDTH, CLK_DIVIDER_ONE_BASED, NULL); - -static struct clk ts_fck; - -static struct clk_hw_omap ts_fck_hw = { - .hw = { - .clk = &ts_fck, - }, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), - .enable_bit = OMAP3430ES2_EN_TS_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(ts_fck, wkup_32k_fck_parent_names, aes2_ick_ops); - -static struct clk uart1_fck; - -static struct clk_hw_omap uart1_fck_hw = { - .hw = { - .clk = &uart1_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_UART1_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(uart1_fck, fshostusb_fck_parent_names, aes2_ick_ops); - -static struct clk uart1_ick; - -static struct clk_hw_omap uart1_ick_hw = { - .hw = { - .clk = &uart1_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_UART1_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(uart1_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk uart2_fck; - -static struct clk_hw_omap uart2_fck_hw = { - .hw = { - .clk = &uart2_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_UART2_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(uart2_fck, fshostusb_fck_parent_names, aes2_ick_ops); - -static struct clk uart2_ick; - -static struct clk_hw_omap uart2_ick_hw = { - .hw = { - .clk = &uart2_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_UART2_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(uart2_ick, aes2_ick_parent_names, aes2_ick_ops); - -static struct clk uart3_fck; - -static const char *uart3_fck_parent_names[] = { - "per_48m_fck", -}; - -static struct clk_hw_omap uart3_fck_hw = { - .hw = { - .clk = &uart3_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_UART3_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(uart3_fck, uart3_fck_parent_names, aes2_ick_ops); - -static struct clk uart3_ick; - -static struct clk_hw_omap uart3_ick_hw = { - .hw = { - .clk = &uart3_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_UART3_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(uart3_ick, gpio2_ick_parent_names, aes2_ick_ops); - -static struct clk uart4_fck; - -static struct clk_hw_omap uart4_fck_hw = { - .hw = { - .clk = &uart4_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3630_EN_UART4_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(uart4_fck, uart3_fck_parent_names, aes2_ick_ops); - -static struct clk uart4_fck_am35xx; - -static struct clk_hw_omap uart4_fck_am35xx_hw = { - .hw = { - .clk = &uart4_fck_am35xx, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = AM35XX_EN_UART4_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(uart4_fck_am35xx, fshostusb_fck_parent_names, aes2_ick_ops); - -static struct clk uart4_ick; - -static struct clk_hw_omap uart4_ick_hw = { - .hw = { - .clk = &uart4_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3630_EN_UART4_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(uart4_ick, gpio2_ick_parent_names, aes2_ick_ops); - -static struct clk uart4_ick_am35xx; - -static struct clk_hw_omap uart4_ick_am35xx_hw = { - .hw = { - .clk = &uart4_ick_am35xx, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = AM35XX_EN_UART4_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(uart4_ick_am35xx, aes2_ick_parent_names, aes2_ick_ops); - -static const struct clksel_rate div2_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_3XXX }, - { .div = 2, .val = 2, .flags = RATE_IN_3XXX }, - { .div = 0 } -}; - -static const struct clksel usb_l4_clksel[] = { - { .parent = &l4_ick, .rates = div2_rates }, - { .parent = NULL }, -}; - -static const char *usb_l4_ick_parent_names[] = { - "l4_ick", -}; - -DEFINE_CLK_OMAP_MUX_GATE(usb_l4_ick, "core_l4_clkdm", usb_l4_clksel, - OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK, - OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - OMAP3430ES1_EN_FSHOSTUSB_SHIFT, - &clkhwops_iclk_wait, usb_l4_ick_parent_names, - ssi_ssr_fck_3430es1_ops); - -static struct clk usbhost_120m_fck; - -static const char *usbhost_120m_fck_parent_names[] = { - "dpll5_m2_ck", -}; - -static struct clk_hw_omap usbhost_120m_fck_hw = { - .hw = { - .clk = &usbhost_120m_fck, - }, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES2_EN_USBHOST2_SHIFT, - .clkdm_name = "usbhost_clkdm", -}; - -DEFINE_STRUCT_CLK(usbhost_120m_fck, usbhost_120m_fck_parent_names, - aes2_ick_ops); - -static struct clk usbhost_48m_fck; - -static struct clk_hw_omap usbhost_48m_fck_hw = { - .hw = { - .clk = &usbhost_48m_fck, - }, - .ops = &clkhwops_omap3430es2_dss_usbhost_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES2_EN_USBHOST1_SHIFT, - .clkdm_name = "usbhost_clkdm", -}; - -DEFINE_STRUCT_CLK(usbhost_48m_fck, core_48m_fck_parent_names, aes2_ick_ops); - -static struct clk usbhost_ick; - -static struct clk_hw_omap usbhost_ick_hw = { - .hw = { - .clk = &usbhost_ick, - }, - .ops = &clkhwops_omap3430es2_iclk_dss_usbhost_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), - .enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT, - .clkdm_name = "usbhost_clkdm", -}; - -DEFINE_STRUCT_CLK(usbhost_ick, security_l4_ick2_parent_names, aes2_ick_ops); - -static struct clk usbtll_fck; - -static struct clk_hw_omap usbtll_fck_hw = { - .hw = { - .clk = &usbtll_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), - .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(usbtll_fck, usbhost_120m_fck_parent_names, aes2_ick_ops); - -static struct clk usbtll_ick; - -static struct clk_hw_omap usbtll_ick_hw = { - .hw = { - .clk = &usbtll_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), - .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, - .clkdm_name = "core_l4_clkdm", -}; - -DEFINE_STRUCT_CLK(usbtll_ick, aes2_ick_parent_names, aes2_ick_ops); - -static const struct clksel_rate usim_96m_rates[] = { - { .div = 2, .val = 3, .flags = RATE_IN_3XXX }, - { .div = 4, .val = 4, .flags = RATE_IN_3XXX }, - { .div = 8, .val = 5, .flags = RATE_IN_3XXX }, - { .div = 10, .val = 6, .flags = RATE_IN_3XXX }, - { .div = 0 } -}; - -static const struct clksel_rate usim_120m_rates[] = { - { .div = 4, .val = 7, .flags = RATE_IN_3XXX }, - { .div = 8, .val = 8, .flags = RATE_IN_3XXX }, - { .div = 16, .val = 9, .flags = RATE_IN_3XXX }, - { .div = 20, .val = 10, .flags = RATE_IN_3XXX }, - { .div = 0 } -}; - -static const struct clksel usim_clksel[] = { - { .parent = &omap_96m_fck, .rates = usim_96m_rates }, - { .parent = &dpll5_m2_ck, .rates = usim_120m_rates }, - { .parent = &sys_ck, .rates = div2_rates }, - { .parent = NULL }, -}; - -static const char *usim_fck_parent_names[] = { - "omap_96m_fck", "dpll5_m2_ck", "sys_ck", -}; - -static struct clk usim_fck; - -static const struct clk_ops usim_fck_ops = { - .enable = &omap2_dflt_clk_enable, - .disable = &omap2_dflt_clk_disable, - .is_enabled = &omap2_dflt_clk_is_enabled, - .recalc_rate = &omap2_clksel_recalc, - .get_parent = &omap2_clksel_find_parent_index, - .set_parent = &omap2_clksel_set_parent, -}; - -DEFINE_CLK_OMAP_MUX_GATE(usim_fck, NULL, usim_clksel, - OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), - OMAP3430ES2_CLKSEL_USIMOCP_MASK, - OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - OMAP3430ES2_EN_USIMOCP_SHIFT, &clkhwops_wait, - usim_fck_parent_names, usim_fck_ops); - -static struct clk usim_ick; - -static struct clk_hw_omap usim_ick_hw = { - .hw = { - .clk = &usim_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, - .clkdm_name = "wkup_clkdm", -}; - -DEFINE_STRUCT_CLK(usim_ick, gpio1_ick_parent_names, aes2_ick_ops); - -static struct clk vpfe_fck; - -static const char *vpfe_fck_parent_names[] = { - "pclk_ck", -}; - -static struct clk_hw_omap vpfe_fck_hw = { - .hw = { - .clk = &vpfe_fck, - }, - .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL), - .enable_bit = AM35XX_VPFE_FCLK_SHIFT, -}; - -DEFINE_STRUCT_CLK(vpfe_fck, vpfe_fck_parent_names, aes1_ick_ops); - -static struct clk vpfe_ick; - -static struct clk_hw_omap vpfe_ick_hw = { - .hw = { - .clk = &vpfe_ick, - }, - .ops = &clkhwops_am35xx_ipss_module_wait, - .enable_reg = OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL), - .enable_bit = AM35XX_VPFE_VBUSP_CLK_SHIFT, - .clkdm_name = "core_l3_clkdm", -}; - -DEFINE_STRUCT_CLK(vpfe_ick, emac_ick_parent_names, aes2_ick_ops); - -static struct clk wdt1_fck; - -DEFINE_STRUCT_CLK_HW_OMAP(wdt1_fck, "wkup_clkdm"); -DEFINE_STRUCT_CLK(wdt1_fck, gpt12_fck_parent_names, core_l4_ick_ops); - -static struct clk wdt1_ick; - -static struct clk_hw_omap wdt1_ick_hw = { - .hw = { - .clk = &wdt1_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_WDT1_SHIFT, - .clkdm_name = "wkup_clkdm", -}; - -DEFINE_STRUCT_CLK(wdt1_ick, gpio1_ick_parent_names, aes2_ick_ops); - -static struct clk wdt2_fck; - -static struct clk_hw_omap wdt2_fck_hw = { - .hw = { - .clk = &wdt2_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_WDT2_SHIFT, - .clkdm_name = "wkup_clkdm", -}; - -DEFINE_STRUCT_CLK(wdt2_fck, gpio1_dbck_parent_names, aes2_ick_ops); - -static struct clk wdt2_ick; - -static struct clk_hw_omap wdt2_ick_hw = { - .hw = { - .clk = &wdt2_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_WDT2_SHIFT, - .clkdm_name = "wkup_clkdm", -}; - -DEFINE_STRUCT_CLK(wdt2_ick, gpio1_ick_parent_names, aes2_ick_ops); - -static struct clk wdt3_fck; - -static struct clk_hw_omap wdt3_fck_hw = { - .hw = { - .clk = &wdt3_fck, - }, - .ops = &clkhwops_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_WDT3_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(wdt3_fck, gpio2_dbck_parent_names, aes2_ick_ops); - -static struct clk wdt3_ick; - -static struct clk_hw_omap wdt3_ick_hw = { - .hw = { - .clk = &wdt3_ick, - }, - .ops = &clkhwops_iclk_wait, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_WDT3_SHIFT, - .clkdm_name = "per_clkdm", -}; - -DEFINE_STRUCT_CLK(wdt3_ick, gpio2_ick_parent_names, aes2_ick_ops); - -/* - * clocks specific to omap3430es1 - */ -static struct omap_clk omap3430es1_clks[] = { - CLK(NULL, "gfx_l3_ck", &gfx_l3_ck), - CLK(NULL, "gfx_l3_fck", &gfx_l3_fck), - CLK(NULL, "gfx_l3_ick", &gfx_l3_ick), - CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck), - CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck), - CLK(NULL, "d2d_26m_fck", &d2d_26m_fck), - CLK(NULL, "fshostusb_fck", &fshostusb_fck), - CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1), - CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1), - CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es1), - CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es1), - CLK(NULL, "fac_ick", &fac_ick), - CLK(NULL, "ssi_ick", &ssi_ick_3430es1), - CLK(NULL, "usb_l4_ick", &usb_l4_ick), - CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es1), - CLK("omapdss_dss", "ick", &dss_ick_3430es1), - CLK(NULL, "dss_ick", &dss_ick_3430es1), -}; - -/* - * clocks specific to am35xx - */ -static struct omap_clk am35xx_clks[] = { - CLK(NULL, "ipss_ick", &ipss_ick), - CLK(NULL, "rmii_ck", &rmii_ck), - CLK(NULL, "pclk_ck", &pclk_ck), - CLK(NULL, "emac_ick", &emac_ick), - CLK(NULL, "emac_fck", &emac_fck), - CLK("davinci_emac.0", NULL, &emac_ick), - CLK("davinci_mdio.0", NULL, &emac_fck), - CLK("vpfe-capture", "master", &vpfe_ick), - CLK("vpfe-capture", "slave", &vpfe_fck), - CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_am35xx), - CLK(NULL, "hsotgusb_fck", &hsotgusb_fck_am35xx), - CLK(NULL, "hecc_ck", &hecc_ck), - CLK(NULL, "uart4_ick", &uart4_ick_am35xx), - CLK(NULL, "uart4_fck", &uart4_fck_am35xx), -}; - -/* - * clocks specific to omap36xx - */ -static struct omap_clk omap36xx_clks[] = { - CLK(NULL, "omap_192m_alwon_fck", &omap_192m_alwon_fck), - CLK(NULL, "uart4_fck", &uart4_fck), -}; - -/* - * clocks common to omap36xx omap34xx - */ -static struct omap_clk omap34xx_omap36xx_clks[] = { - CLK(NULL, "aes1_ick", &aes1_ick), - CLK("omap_rng", "ick", &rng_ick), - CLK("omap3-rom-rng", "ick", &rng_ick), - CLK(NULL, "sha11_ick", &sha11_ick), - CLK(NULL, "des1_ick", &des1_ick), - CLK(NULL, "cam_mclk", &cam_mclk), - CLK(NULL, "cam_ick", &cam_ick), - CLK(NULL, "csi2_96m_fck", &csi2_96m_fck), - CLK(NULL, "security_l3_ick", &security_l3_ick), - CLK(NULL, "pka_ick", &pka_ick), - CLK(NULL, "icr_ick", &icr_ick), - CLK("omap-aes", "ick", &aes2_ick), - CLK("omap-sham", "ick", &sha12_ick), - CLK(NULL, "des2_ick", &des2_ick), - CLK(NULL, "mspro_ick", &mspro_ick), - CLK(NULL, "mailboxes_ick", &mailboxes_ick), - CLK(NULL, "ssi_l4_ick", &ssi_l4_ick), - CLK(NULL, "sr1_fck", &sr1_fck), - CLK(NULL, "sr2_fck", &sr2_fck), - CLK(NULL, "sr_l4_ick", &sr_l4_ick), - CLK(NULL, "security_l4_ick2", &security_l4_ick2), - CLK(NULL, "wkup_l4_ick", &wkup_l4_ick), - CLK(NULL, "dpll2_fck", &dpll2_fck), - CLK(NULL, "iva2_ck", &iva2_ck), - CLK(NULL, "modem_fck", &modem_fck), - CLK(NULL, "sad2d_ick", &sad2d_ick), - CLK(NULL, "mad2d_ick", &mad2d_ick), - CLK(NULL, "mspro_fck", &mspro_fck), - CLK(NULL, "dpll2_ck", &dpll2_ck), - CLK(NULL, "dpll2_m2_ck", &dpll2_m2_ck), -}; - -/* - * clocks common to omap36xx and omap3430es2plus - */ -static struct omap_clk omap36xx_omap3430es2plus_clks[] = { - CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2), - CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2), - CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es2), - CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es2), - CLK(NULL, "ssi_ick", &ssi_ick_3430es2), - CLK(NULL, "usim_fck", &usim_fck), - CLK(NULL, "usim_ick", &usim_ick), -}; - -/* - * clocks common to am35xx omap36xx and omap3430es2plus - */ -static struct omap_clk omap36xx_am35xx_omap3430es2plus_clks[] = { - CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck), - CLK(NULL, "dpll5_ck", &dpll5_ck), - CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck), - CLK(NULL, "sgx_fck", &sgx_fck), - CLK(NULL, "sgx_ick", &sgx_ick), - CLK(NULL, "cpefuse_fck", &cpefuse_fck), - CLK(NULL, "ts_fck", &ts_fck), - CLK(NULL, "usbtll_fck", &usbtll_fck), - CLK(NULL, "usbtll_ick", &usbtll_ick), - CLK("omap_hsmmc.2", "ick", &mmchs3_ick), - CLK(NULL, "mmchs3_ick", &mmchs3_ick), - CLK(NULL, "mmchs3_fck", &mmchs3_fck), - CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es2), - CLK("omapdss_dss", "ick", &dss_ick_3430es2), - CLK(NULL, "dss_ick", &dss_ick_3430es2), - CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck), - CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck), - CLK(NULL, "usbhost_ick", &usbhost_ick), -}; - -/* - * common clocks - */ -static struct omap_clk omap3xxx_clks[] = { - CLK(NULL, "apb_pclk", &dummy_apb_pclk), - CLK(NULL, "omap_32k_fck", &omap_32k_fck), - CLK(NULL, "virt_12m_ck", &virt_12m_ck), - CLK(NULL, "virt_13m_ck", &virt_13m_ck), - CLK(NULL, "virt_19200000_ck", &virt_19200000_ck), - CLK(NULL, "virt_26000000_ck", &virt_26000000_ck), - CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck), - CLK(NULL, "osc_sys_ck", &osc_sys_ck), - CLK("twl", "fck", &osc_sys_ck), - CLK(NULL, "sys_ck", &sys_ck), - CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck), - CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck), - CLK(NULL, "sys_altclk", &sys_altclk), - CLK(NULL, "mcbsp_clks", &mcbsp_clks), - CLK(NULL, "sys_clkout1", &sys_clkout1), - CLK(NULL, "dpll1_ck", &dpll1_ck), - CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck), - CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck), - CLK(NULL, "dpll3_ck", &dpll3_ck), - CLK(NULL, "core_ck", &core_ck), - CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck), - CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck), - CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck), - CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck), - CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck), - CLK(NULL, "dpll4_ck", &dpll4_ck), - CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck), - CLK(NULL, "omap_96m_fck", &omap_96m_fck), - CLK(NULL, "cm_96m_fck", &cm_96m_fck), - CLK(NULL, "omap_54m_fck", &omap_54m_fck), - CLK(NULL, "omap_48m_fck", &omap_48m_fck), - CLK(NULL, "omap_12m_fck", &omap_12m_fck), - CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck), - CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck), - CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck), - CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck), - CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck), - CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck), - CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck), - CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck), - CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck), - CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck), - CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck), - CLK(NULL, "clkout2_src_ck", &clkout2_src_ck), - CLK(NULL, "sys_clkout2", &sys_clkout2), - CLK(NULL, "corex2_fck", &corex2_fck), - CLK(NULL, "dpll1_fck", &dpll1_fck), - CLK(NULL, "mpu_ck", &mpu_ck), - CLK(NULL, "arm_fck", &arm_fck), - CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck), - CLK(NULL, "l3_ick", &l3_ick), - CLK(NULL, "l4_ick", &l4_ick), - CLK(NULL, "rm_ick", &rm_ick), - CLK(NULL, "gpt10_fck", &gpt10_fck), - CLK(NULL, "gpt11_fck", &gpt11_fck), - CLK(NULL, "core_96m_fck", &core_96m_fck), - CLK(NULL, "mmchs2_fck", &mmchs2_fck), - CLK(NULL, "mmchs1_fck", &mmchs1_fck), - CLK(NULL, "i2c3_fck", &i2c3_fck), - CLK(NULL, "i2c2_fck", &i2c2_fck), - CLK(NULL, "i2c1_fck", &i2c1_fck), - CLK(NULL, "mcbsp5_fck", &mcbsp5_fck), - CLK(NULL, "mcbsp1_fck", &mcbsp1_fck), - CLK(NULL, "core_48m_fck", &core_48m_fck), - CLK(NULL, "mcspi4_fck", &mcspi4_fck), - CLK(NULL, "mcspi3_fck", &mcspi3_fck), - CLK(NULL, "mcspi2_fck", &mcspi2_fck), - CLK(NULL, "mcspi1_fck", &mcspi1_fck), - CLK(NULL, "uart2_fck", &uart2_fck), - CLK(NULL, "uart1_fck", &uart1_fck), - CLK(NULL, "core_12m_fck", &core_12m_fck), - CLK("omap_hdq.0", "fck", &hdq_fck), - CLK(NULL, "hdq_fck", &hdq_fck), - CLK(NULL, "core_l3_ick", &core_l3_ick), - CLK(NULL, "sdrc_ick", &sdrc_ick), - CLK(NULL, "gpmc_fck", &gpmc_fck), - CLK(NULL, "core_l4_ick", &core_l4_ick), - CLK("omap_hsmmc.1", "ick", &mmchs2_ick), - CLK("omap_hsmmc.0", "ick", &mmchs1_ick), - CLK(NULL, "mmchs2_ick", &mmchs2_ick), - CLK(NULL, "mmchs1_ick", &mmchs1_ick), - CLK("omap_hdq.0", "ick", &hdq_ick), - CLK(NULL, "hdq_ick", &hdq_ick), - CLK("omap2_mcspi.4", "ick", &mcspi4_ick), - CLK("omap2_mcspi.3", "ick", &mcspi3_ick), - CLK("omap2_mcspi.2", "ick", &mcspi2_ick), - CLK("omap2_mcspi.1", "ick", &mcspi1_ick), - CLK(NULL, "mcspi4_ick", &mcspi4_ick), - CLK(NULL, "mcspi3_ick", &mcspi3_ick), - CLK(NULL, "mcspi2_ick", &mcspi2_ick), - CLK(NULL, "mcspi1_ick", &mcspi1_ick), - CLK("omap_i2c.3", "ick", &i2c3_ick), - CLK("omap_i2c.2", "ick", &i2c2_ick), - CLK("omap_i2c.1", "ick", &i2c1_ick), - CLK(NULL, "i2c3_ick", &i2c3_ick), - CLK(NULL, "i2c2_ick", &i2c2_ick), - CLK(NULL, "i2c1_ick", &i2c1_ick), - CLK(NULL, "uart2_ick", &uart2_ick), - CLK(NULL, "uart1_ick", &uart1_ick), - CLK(NULL, "gpt11_ick", &gpt11_ick), - CLK(NULL, "gpt10_ick", &gpt10_ick), - CLK("omap-mcbsp.5", "ick", &mcbsp5_ick), - CLK("omap-mcbsp.1", "ick", &mcbsp1_ick), - CLK(NULL, "mcbsp5_ick", &mcbsp5_ick), - CLK(NULL, "mcbsp1_ick", &mcbsp1_ick), - CLK(NULL, "omapctrl_ick", &omapctrl_ick), - CLK(NULL, "dss_tv_fck", &dss_tv_fck), - CLK(NULL, "dss_96m_fck", &dss_96m_fck), - CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck), - CLK(NULL, "init_60m_fclk", &dummy_ck), - CLK(NULL, "gpt1_fck", &gpt1_fck), - CLK(NULL, "aes2_ick", &aes2_ick), - CLK(NULL, "wkup_32k_fck", &wkup_32k_fck), - CLK(NULL, "gpio1_dbck", &gpio1_dbck), - CLK(NULL, "sha12_ick", &sha12_ick), - CLK(NULL, "wdt2_fck", &wdt2_fck), - CLK("omap_wdt", "ick", &wdt2_ick), - CLK(NULL, "wdt2_ick", &wdt2_ick), - CLK(NULL, "wdt1_ick", &wdt1_ick), - CLK(NULL, "gpio1_ick", &gpio1_ick), - CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick), - CLK(NULL, "gpt12_ick", &gpt12_ick), - CLK(NULL, "gpt1_ick", &gpt1_ick), - CLK(NULL, "per_96m_fck", &per_96m_fck), - CLK(NULL, "per_48m_fck", &per_48m_fck), - CLK(NULL, "uart3_fck", &uart3_fck), - CLK(NULL, "gpt2_fck", &gpt2_fck), - CLK(NULL, "gpt3_fck", &gpt3_fck), - CLK(NULL, "gpt4_fck", &gpt4_fck), - CLK(NULL, "gpt5_fck", &gpt5_fck), - CLK(NULL, "gpt6_fck", &gpt6_fck), - CLK(NULL, "gpt7_fck", &gpt7_fck), - CLK(NULL, "gpt8_fck", &gpt8_fck), - CLK(NULL, "gpt9_fck", &gpt9_fck), - CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck), - CLK(NULL, "gpio6_dbck", &gpio6_dbck), - CLK(NULL, "gpio5_dbck", &gpio5_dbck), - CLK(NULL, "gpio4_dbck", &gpio4_dbck), - CLK(NULL, "gpio3_dbck", &gpio3_dbck), - CLK(NULL, "gpio2_dbck", &gpio2_dbck), - CLK(NULL, "wdt3_fck", &wdt3_fck), - CLK(NULL, "per_l4_ick", &per_l4_ick), - CLK(NULL, "gpio6_ick", &gpio6_ick), - CLK(NULL, "gpio5_ick", &gpio5_ick), - CLK(NULL, "gpio4_ick", &gpio4_ick), - CLK(NULL, "gpio3_ick", &gpio3_ick), - CLK(NULL, "gpio2_ick", &gpio2_ick), - CLK(NULL, "wdt3_ick", &wdt3_ick), - CLK(NULL, "uart3_ick", &uart3_ick), - CLK(NULL, "uart4_ick", &uart4_ick), - CLK(NULL, "gpt9_ick", &gpt9_ick), - CLK(NULL, "gpt8_ick", &gpt8_ick), - CLK(NULL, "gpt7_ick", &gpt7_ick), - CLK(NULL, "gpt6_ick", &gpt6_ick), - CLK(NULL, "gpt5_ick", &gpt5_ick), - CLK(NULL, "gpt4_ick", &gpt4_ick), - CLK(NULL, "gpt3_ick", &gpt3_ick), - CLK(NULL, "gpt2_ick", &gpt2_ick), - CLK("omap-mcbsp.2", "ick", &mcbsp2_ick), - CLK("omap-mcbsp.3", "ick", &mcbsp3_ick), - CLK("omap-mcbsp.4", "ick", &mcbsp4_ick), - CLK(NULL, "mcbsp4_ick", &mcbsp2_ick), - CLK(NULL, "mcbsp3_ick", &mcbsp3_ick), - CLK(NULL, "mcbsp2_ick", &mcbsp4_ick), - CLK(NULL, "mcbsp2_fck", &mcbsp2_fck), - CLK(NULL, "mcbsp3_fck", &mcbsp3_fck), - CLK(NULL, "mcbsp4_fck", &mcbsp4_fck), - CLK("etb", "emu_src_ck", &emu_src_ck), - CLK(NULL, "emu_src_ck", &emu_src_ck), - CLK(NULL, "pclk_fck", &pclk_fck), - CLK(NULL, "pclkx2_fck", &pclkx2_fck), - CLK(NULL, "atclk_fck", &atclk_fck), - CLK(NULL, "traceclk_src_fck", &traceclk_src_fck), - CLK(NULL, "traceclk_fck", &traceclk_fck), - CLK(NULL, "secure_32k_fck", &secure_32k_fck), - CLK(NULL, "gpt12_fck", &gpt12_fck), - CLK(NULL, "wdt1_fck", &wdt1_fck), - CLK(NULL, "timer_32k_ck", &omap_32k_fck), - CLK(NULL, "timer_sys_ck", &sys_ck), - CLK(NULL, "cpufreq_ck", &dpll1_ck), -}; - -static const char *enable_init_clks[] = { - "sdrc_ick", - "gpmc_fck", - "omapctrl_ick", -}; - -int __init omap3xxx_clk_init(void) -{ - if (omap3_has_192mhz_clk()) - omap_96m_alwon_fck = omap_96m_alwon_fck_3630; - - if (cpu_is_omap3630()) { - dpll3_m3x2_ck = dpll3_m3x2_ck_3630; - dpll4_m2x2_ck = dpll4_m2x2_ck_3630; - dpll4_m3x2_ck = dpll4_m3x2_ck_3630; - dpll4_m4x2_ck = dpll4_m4x2_ck_3630; - dpll4_m5x2_ck = dpll4_m5x2_ck_3630; - dpll4_m6x2_ck = dpll4_m6x2_ck_3630; - } - - /* - * XXX This type of dynamic rewriting of the clock tree is - * deprecated and should be revised soon. - */ - if (cpu_is_omap3630()) - dpll4_dd = dpll4_dd_3630; - else - dpll4_dd = dpll4_dd_34xx; - - - /* - * 3505 must be tested before 3517, since 3517 returns true - * for both AM3517 chips and AM3517 family chips, which - * includes 3505. Unfortunately there's no obvious family - * test for 3517/3505 :-( - */ - if (soc_is_am35xx()) { - cpu_mask = RATE_IN_34XX; - omap_clocks_register(am35xx_clks, ARRAY_SIZE(am35xx_clks)); - omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks, - ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks)); - omap_clocks_register(omap3xxx_clks, ARRAY_SIZE(omap3xxx_clks)); - } else if (cpu_is_omap3630()) { - cpu_mask = (RATE_IN_34XX | RATE_IN_36XX); - omap_clocks_register(omap36xx_clks, ARRAY_SIZE(omap36xx_clks)); - omap_clocks_register(omap36xx_omap3430es2plus_clks, - ARRAY_SIZE(omap36xx_omap3430es2plus_clks)); - omap_clocks_register(omap34xx_omap36xx_clks, - ARRAY_SIZE(omap34xx_omap36xx_clks)); - omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks, - ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks)); - omap_clocks_register(omap3xxx_clks, ARRAY_SIZE(omap3xxx_clks)); - } else if (soc_is_am33xx()) { - cpu_mask = RATE_IN_AM33XX; - } else if (cpu_is_ti814x()) { - cpu_mask = RATE_IN_TI814X; - } else if (cpu_is_omap34xx()) { - if (omap_rev() == OMAP3430_REV_ES1_0) { - cpu_mask = RATE_IN_3430ES1; - omap_clocks_register(omap3430es1_clks, - ARRAY_SIZE(omap3430es1_clks)); - omap_clocks_register(omap34xx_omap36xx_clks, - ARRAY_SIZE(omap34xx_omap36xx_clks)); - omap_clocks_register(omap3xxx_clks, - ARRAY_SIZE(omap3xxx_clks)); - } else { - /* - * Assume that anything that we haven't matched yet - * has 3430ES2-type clocks. - */ - cpu_mask = RATE_IN_3430ES2PLUS; - omap_clocks_register(omap34xx_omap36xx_clks, - ARRAY_SIZE(omap34xx_omap36xx_clks)); - omap_clocks_register(omap36xx_omap3430es2plus_clks, - ARRAY_SIZE(omap36xx_omap3430es2plus_clks)); - omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks, - ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks)); - omap_clocks_register(omap3xxx_clks, - ARRAY_SIZE(omap3xxx_clks)); - } - } else { - WARN(1, "clock: could not identify OMAP3 variant\n"); - } - - omap2_clk_disable_autoidle_all(); - - omap2_clk_enable_init_clocks(enable_init_clks, - ARRAY_SIZE(enable_init_clks)); - - pr_info("Clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n", - (clk_get_rate(&osc_sys_ck) / 1000000), - (clk_get_rate(&osc_sys_ck) / 100000) % 10, - (clk_get_rate(&core_ck) / 1000000), - (clk_get_rate(&arm_fck) / 1000000)); - - /* - * Lock DPLL5 -- here only until other device init code can - * handle this - */ - if (!cpu_is_ti81xx() && (omap_rev() >= OMAP3430_REV_ES2_0)) - omap3_clk_lock_dpll5(); - - /* Avoid sleeping during omap3_core_dpll_m2_set_rate() */ - sdrc_ick_p = clk_get(NULL, "sdrc_ick"); - arm_fck_p = clk_get(NULL, "arm_fck"); - - return 0; -} diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c deleted file mode 100644 index c78e893eba7d..000000000000 --- a/arch/arm/mach-omap2/clkt2xxx_apll.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * OMAP2xxx APLL clock control functions - * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2010 Nokia Corporation - * - * Contacts: - * Richard Woodruff <r-woodruff2@ti.com> - * Paul Walmsley - * - * Based on earlier work by Tuukka Tikkanen, Tony Lindgren, - * Gordon McNutt and RidgeRun, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/io.h> - - -#include "clock.h" -#include "clock2xxx.h" -#include "cm2xxx.h" -#include "cm-regbits-24xx.h" - -/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */ -#define EN_APLL_STOPPED 0 -#define EN_APLL_LOCKED 3 - -/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */ -#define APLLS_CLKIN_19_2MHZ 0 -#define APLLS_CLKIN_13MHZ 2 -#define APLLS_CLKIN_12MHZ 3 - -/* Private functions */ - -/** - * omap2xxx_clk_apll_locked - is the APLL locked? - * @hw: struct clk_hw * of the APLL to check - * - * If the APLL IP block referred to by @hw indicates that it's locked, - * return true; otherwise, return false. - */ -static bool omap2xxx_clk_apll_locked(struct clk_hw *hw) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - u32 r, apll_mask; - - apll_mask = EN_APLL_LOCKED << clk->enable_bit; - - r = omap2xxx_cm_get_pll_status(); - - return ((r & apll_mask) == apll_mask) ? true : false; -} - -int omap2_clk_apll96_enable(struct clk_hw *hw) -{ - return omap2xxx_cm_apll96_enable(); -} - -int omap2_clk_apll54_enable(struct clk_hw *hw) -{ - return omap2xxx_cm_apll54_enable(); -} - -static void _apll96_allow_idle(struct clk_hw_omap *clk) -{ - omap2xxx_cm_set_apll96_auto_low_power_stop(); -} - -static void _apll96_deny_idle(struct clk_hw_omap *clk) -{ - omap2xxx_cm_set_apll96_disable_autoidle(); -} - -static void _apll54_allow_idle(struct clk_hw_omap *clk) -{ - omap2xxx_cm_set_apll54_auto_low_power_stop(); -} - -static void _apll54_deny_idle(struct clk_hw_omap *clk) -{ - omap2xxx_cm_set_apll54_disable_autoidle(); -} - -void omap2_clk_apll96_disable(struct clk_hw *hw) -{ - omap2xxx_cm_apll96_disable(); -} - -void omap2_clk_apll54_disable(struct clk_hw *hw) -{ - omap2xxx_cm_apll54_disable(); -} - -unsigned long omap2_clk_apll54_recalc(struct clk_hw *hw, - unsigned long parent_rate) -{ - return (omap2xxx_clk_apll_locked(hw)) ? 54000000 : 0; -} - -unsigned long omap2_clk_apll96_recalc(struct clk_hw *hw, - unsigned long parent_rate) -{ - return (omap2xxx_clk_apll_locked(hw)) ? 96000000 : 0; -} - -/* Public data */ -const struct clk_hw_omap_ops clkhwops_apll54 = { - .allow_idle = _apll54_allow_idle, - .deny_idle = _apll54_deny_idle, -}; - -const struct clk_hw_omap_ops clkhwops_apll96 = { - .allow_idle = _apll96_allow_idle, - .deny_idle = _apll96_deny_idle, -}; - -/* Public functions */ - -u32 omap2xxx_get_apll_clkin(void) -{ - u32 aplls, srate = 0; - - aplls = omap2xxx_cm_get_pll_config(); - aplls &= OMAP24XX_APLLS_CLKIN_MASK; - aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT; - - if (aplls == APLLS_CLKIN_19_2MHZ) - srate = 19200000; - else if (aplls == APLLS_CLKIN_13MHZ) - srate = 13000000; - else if (aplls == APLLS_CLKIN_12MHZ) - srate = 12000000; - - return srate; -} - diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 6ad5b4dbd33e..6124db5c37ae 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -23,7 +23,6 @@ #include <linux/clk-provider.h> #include <linux/io.h> #include <linux/bitops.h> -#include <linux/clk-private.h> #include <asm/cpu.h> #include <trace/events/power.h> @@ -620,6 +619,9 @@ void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks) for (i = 0; i < num_clocks; i++) { init_clk = clk_get(NULL, clk_names[i]); + if (WARN(IS_ERR(init_clk), "could not find init clock %s\n", + clk_names[i])) + continue; clk_prepare_enable(init_clk); } } @@ -630,21 +632,6 @@ const struct clk_hw_omap_ops clkhwops_wait = { }; /** - * omap_clocks_register - register an array of omap_clk - * @ocs: pointer to an array of omap_clk to register - */ -void __init omap_clocks_register(struct omap_clk oclks[], int cnt) -{ - struct omap_clk *c; - - for (c = oclks; c < oclks + cnt; c++) { - clkdev_add(&c->lk); - if (!__clk_init(NULL, c->lk.clk)) - omap2_init_clk_hw_omap_clocks(c->lk.clk); - } -} - -/** * omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument * @mpurate_ck_name: clk name of the clock to change rate * diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index a4282e79143e..a56742f96000 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -40,23 +40,29 @@ struct omap_clk { struct clockdomain; #define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name) \ - static struct clk _name = { \ + static struct clk_core _name##_core = { \ .name = #_name, \ .hw = &_name##_hw.hw, \ .parent_names = _parent_array_name, \ .num_parents = ARRAY_SIZE(_parent_array_name), \ .ops = &_clkops_name, \ + }; \ + static struct clk _name = { \ + .core = &_name##_core, \ }; #define DEFINE_STRUCT_CLK_FLAGS(_name, _parent_array_name, \ _clkops_name, _flags) \ - static struct clk _name = { \ + static struct clk_core _name##_core = { \ .name = #_name, \ .hw = &_name##_hw.hw, \ .parent_names = _parent_array_name, \ .num_parents = ARRAY_SIZE(_parent_array_name), \ .ops = &_clkops_name, \ .flags = _flags, \ + }; \ + static struct clk _name = { \ + .core = &_name##_core, \ }; #define DEFINE_STRUCT_CLK_HW_OMAP(_name, _clkdm_name) \ @@ -177,7 +183,6 @@ struct clksel { u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk); void omap3_dpll_allow_idle(struct clk_hw_omap *clk); void omap3_dpll_deny_idle(struct clk_hw_omap *clk); -int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk); void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk); void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk); @@ -239,7 +244,6 @@ struct ti_clk_features { extern struct ti_clk_features ti_clk_features; extern const struct clkops clkops_omap2_dflt_wait; -extern const struct clkops clkops_dummy; extern const struct clkops clkops_omap2_dflt; extern struct clk_functions omap2_clk_functions; @@ -248,7 +252,6 @@ extern const struct clksel_rate gpt_32k_rates[]; extern const struct clksel_rate gpt_sys_rates[]; extern const struct clksel_rate gfx_l3_rates[]; extern const struct clksel_rate dsp_ick_rates[]; -extern struct clk dummy_ck; extern const struct clk_hw_omap_ops clkhwops_iclk_wait; extern const struct clk_hw_omap_ops clkhwops_wait; @@ -273,7 +276,5 @@ extern void __iomem *clk_memmaps[]; extern int omap2_clkops_enable_clkdm(struct clk_hw *hw); extern void omap2_clkops_disable_clkdm(struct clk_hw *hw); -extern void omap_clocks_register(struct omap_clk *oclks, int cnt); - void __init ti_clk_init_features(void); #endif diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h index a090225ceeba..125c37614848 100644 --- a/arch/arm/mach-omap2/clock2xxx.h +++ b/arch/arm/mach-omap2/clock2xxx.h @@ -22,12 +22,7 @@ unsigned long omap2xxx_sys_clk_recalc(struct clk_hw *clk, unsigned long omap2_osc_clk_recalc(struct clk_hw *clk, unsigned long parent_rate); void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw); -unsigned long omap2_clk_apll54_recalc(struct clk_hw *hw, - unsigned long parent_rate); -unsigned long omap2_clk_apll96_recalc(struct clk_hw *hw, - unsigned long parent_rate); unsigned long omap2xxx_clk_get_core_rate(void); -u32 omap2xxx_get_apll_clkin(void); u32 omap2xxx_get_sysclkdiv(void); void omap2xxx_clk_prepare_for_reboot(void); void omap2xxx_clkt_vps_check_bootloader_rates(void); @@ -46,11 +41,5 @@ int omap2430_clk_init(void); #endif extern struct clk_hw *dclk_hw; -int omap2_enable_osc_ck(struct clk_hw *hw); -void omap2_disable_osc_ck(struct clk_hw *hw); -int omap2_clk_apll96_enable(struct clk_hw *hw); -int omap2_clk_apll54_enable(struct clk_hw *hw); -void omap2_clk_apll96_disable(struct clk_hw *hw); -void omap2_clk_apll54_disable(struct clk_hw *hw); #endif diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c index ef4d21bfb964..61b60dfb14ce 100644 --- a/arch/arm/mach-omap2/clock_common_data.c +++ b/arch/arm/mach-omap2/clock_common_data.c @@ -16,7 +16,6 @@ * OMAP3xxx clock definition files. */ -#include <linux/clk-private.h> #include "clock.h" /* clksel_rate data common to 24xx/343x */ @@ -114,13 +113,3 @@ const struct clksel_rate div31_1to31_rates[] = { { .div = 31, .val = 31, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, { .div = 0 }, }; - -/* Clocks shared between various OMAP SoCs */ - -static struct clk_ops dummy_ck_ops = {}; - -struct clk dummy_ck = { - .name = "dummy_clk", - .ops = &dummy_ck_ops, - .flags = CLK_IS_BASIC, -}; diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 82c37b1becc4..77bab5fb6814 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -216,6 +216,7 @@ extern void __init omap242x_clockdomains_init(void); extern void __init omap243x_clockdomains_init(void); extern void __init omap3xxx_clockdomains_init(void); extern void __init am33xx_clockdomains_init(void); +extern void __init ti81xx_clockdomains_init(void); extern void __init omap44xx_clockdomains_init(void); extern void __init omap54xx_clockdomains_init(void); extern void __init dra7xx_clockdomains_init(void); diff --git a/arch/arm/mach-omap2/clockdomains81xx_data.c b/arch/arm/mach-omap2/clockdomains81xx_data.c new file mode 100644 index 000000000000..ce2a82001d0d --- /dev/null +++ b/arch/arm/mach-omap2/clockdomains81xx_data.c @@ -0,0 +1,194 @@ +/* + * TI81XX Clock Domain data. + * + * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/ + * Copyright (C) 2013 SKTB SKiT, http://www.skitlab.ru/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_81XX_H +#define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_81XX_H + +#include <linux/kernel.h> +#include <linux/io.h> + +#include "clockdomain.h" +#include "cm81xx.h" + +/* + * Note that 814x seems to have HWSUP_SWSUP for many clockdomains + * while 816x does not. According to the TRM, 816x only has HWSUP + * for ALWON_L3_FAST. Also note that the TI tree clockdomains81xx.h + * seems to have the related ifdef the wrong way around claiming + * 816x supports HWSUP while 814x does not. For now, we only set + * HWSUP for ALWON_L3_FAST as that seems to be supported for both + * dm814x and dm816x. + */ + +/* Common for 81xx */ + +static struct clockdomain alwon_l3_slow_81xx_clkdm = { + .name = "alwon_l3s_clkdm", + .pwrdm = { .name = "alwon_pwrdm" }, + .cm_inst = TI81XX_CM_ALWON_MOD, + .clkdm_offs = TI81XX_CM_ALWON_L3_SLOW_CLKDM, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain alwon_l3_med_81xx_clkdm = { + .name = "alwon_l3_med_clkdm", + .pwrdm = { .name = "alwon_pwrdm" }, + .cm_inst = TI81XX_CM_ALWON_MOD, + .clkdm_offs = TI81XX_CM_ALWON_L3_MED_CLKDM, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain alwon_l3_fast_81xx_clkdm = { + .name = "alwon_l3_fast_clkdm", + .pwrdm = { .name = "alwon_pwrdm" }, + .cm_inst = TI81XX_CM_ALWON_MOD, + .clkdm_offs = TI81XX_CM_ALWON_L3_FAST_CLKDM, + .flags = CLKDM_CAN_HWSUP_SWSUP, +}; + +static struct clockdomain alwon_ethernet_81xx_clkdm = { + .name = "alwon_ethernet_clkdm", + .pwrdm = { .name = "alwon_pwrdm" }, + .cm_inst = TI81XX_CM_ALWON_MOD, + .clkdm_offs = TI81XX_CM_ETHERNET_CLKDM, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain mmu_81xx_clkdm = { + .name = "mmu_clkdm", + .pwrdm = { .name = "alwon_pwrdm" }, + .cm_inst = TI81XX_CM_ALWON_MOD, + .clkdm_offs = TI81XX_CM_MMU_CLKDM, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain mmu_cfg_81xx_clkdm = { + .name = "mmu_cfg_clkdm", + .pwrdm = { .name = "alwon_pwrdm" }, + .cm_inst = TI81XX_CM_ALWON_MOD, + .clkdm_offs = TI81XX_CM_MMUCFG_CLKDM, + .flags = CLKDM_CAN_SWSUP, +}; + +/* 816x only */ + +static struct clockdomain alwon_mpu_816x_clkdm = { + .name = "alwon_mpu_clkdm", + .pwrdm = { .name = "alwon_pwrdm" }, + .cm_inst = TI81XX_CM_ALWON_MOD, + .clkdm_offs = TI81XX_CM_ALWON_MPU_CLKDM, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain active_gem_816x_clkdm = { + .name = "active_gem_clkdm", + .pwrdm = { .name = "active_pwrdm" }, + .cm_inst = TI816X_CM_ACTIVE_MOD, + .clkdm_offs = TI816X_CM_ACTIVE_GEM_CLKDM, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain ivahd0_816x_clkdm = { + .name = "ivahd0_clkdm", + .pwrdm = { .name = "ivahd0_pwrdm" }, + .cm_inst = TI816X_CM_IVAHD0_MOD, + .clkdm_offs = TI816X_CM_IVAHD0_CLKDM, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain ivahd1_816x_clkdm = { + .name = "ivahd1_clkdm", + .pwrdm = { .name = "ivahd1_pwrdm" }, + .cm_inst = TI816X_CM_IVAHD1_MOD, + .clkdm_offs = TI816X_CM_IVAHD1_CLKDM, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain ivahd2_816x_clkdm = { + .name = "ivahd2_clkdm", + .pwrdm = { .name = "ivahd2_pwrdm" }, + .cm_inst = TI816X_CM_IVAHD2_MOD, + .clkdm_offs = TI816X_CM_IVAHD2_CLKDM, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain sgx_816x_clkdm = { + .name = "sgx_clkdm", + .pwrdm = { .name = "sgx_pwrdm" }, + .cm_inst = TI816X_CM_SGX_MOD, + .clkdm_offs = TI816X_CM_SGX_CLKDM, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain default_l3_med_816x_clkdm = { + .name = "default_l3_med_clkdm", + .pwrdm = { .name = "default_pwrdm" }, + .cm_inst = TI816X_CM_DEFAULT_MOD, + .clkdm_offs = TI816X_CM_DEFAULT_L3_MED_CLKDM, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain default_ducati_816x_clkdm = { + .name = "default_ducati_clkdm", + .pwrdm = { .name = "default_pwrdm" }, + .cm_inst = TI816X_CM_DEFAULT_MOD, + .clkdm_offs = TI816X_CM_DEFAULT_DUCATI_CLKDM, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain default_pci_816x_clkdm = { + .name = "default_pci_clkdm", + .pwrdm = { .name = "default_pwrdm" }, + .cm_inst = TI816X_CM_DEFAULT_MOD, + .clkdm_offs = TI816X_CM_DEFAULT_PCI_CLKDM, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain default_l3_slow_816x_clkdm = { + .name = "default_l3_slow_clkdm", + .pwrdm = { .name = "default_pwrdm" }, + .cm_inst = TI816X_CM_DEFAULT_MOD, + .clkdm_offs = TI816X_CM_DEFAULT_L3_SLOW_CLKDM, + .flags = CLKDM_CAN_SWSUP, +}; + +static struct clockdomain *clockdomains_ti81xx[] __initdata = { + &alwon_mpu_816x_clkdm, + &alwon_l3_slow_81xx_clkdm, + &alwon_l3_med_81xx_clkdm, + &alwon_l3_fast_81xx_clkdm, + &alwon_ethernet_81xx_clkdm, + &mmu_81xx_clkdm, + &mmu_cfg_81xx_clkdm, + &active_gem_816x_clkdm, + &ivahd0_816x_clkdm, + &ivahd1_816x_clkdm, + &ivahd2_816x_clkdm, + &sgx_816x_clkdm, + &default_l3_med_816x_clkdm, + &default_ducati_816x_clkdm, + &default_pci_816x_clkdm, + &default_l3_slow_816x_clkdm, + NULL, +}; + +void __init ti81xx_clockdomains_init(void) +{ + clkdm_register_platform_funcs(&am33xx_clkdm_operations); + clkdm_register_clkdms(clockdomains_ti81xx); + clkdm_complete_init(); +} +#endif diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c index a96d901b1d5d..ef62ac9dcd05 100644 --- a/arch/arm/mach-omap2/cm2xxx.c +++ b/arch/arm/mach-omap2/cm2xxx.c @@ -370,16 +370,6 @@ u32 omap2xxx_cm_get_core_pll_config(void) return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); } -u32 omap2xxx_cm_get_pll_config(void) -{ - return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL1); -} - -u32 omap2xxx_cm_get_pll_status(void) -{ - return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); -} - void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm) { u32 tmp; diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h index c89502b168ae..83b6c597b0e1 100644 --- a/arch/arm/mach-omap2/cm2xxx.h +++ b/arch/arm/mach-omap2/cm2xxx.h @@ -60,8 +60,6 @@ extern int omap2xxx_cm_fclks_active(void); extern int omap2xxx_cm_mpu_retention_allowed(void); extern u32 omap2xxx_cm_get_core_clk_src(void); extern u32 omap2xxx_cm_get_core_pll_config(void); -extern u32 omap2xxx_cm_get_pll_config(void); -extern u32 omap2xxx_cm_get_pll_status(void); extern void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm); diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index b9ad463a368a..cc5aac784278 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -72,27 +72,6 @@ static inline u32 am33xx_cm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx) return v; } -static inline u32 am33xx_cm_set_reg_bits(u32 bits, s16 inst, s16 idx) -{ - return am33xx_cm_rmw_reg_bits(bits, bits, inst, idx); -} - -static inline u32 am33xx_cm_clear_reg_bits(u32 bits, s16 inst, s16 idx) -{ - return am33xx_cm_rmw_reg_bits(bits, 0x0, inst, idx); -} - -static inline u32 am33xx_cm_read_reg_bits(u16 inst, s16 idx, u32 mask) -{ - u32 v; - - v = am33xx_cm_read_reg(inst, idx); - v &= mask; - v >>= __ffs(mask); - - return v; -} - /** * _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield * @inst: CM instance register offset (*_INST macro) diff --git a/arch/arm/mach-omap2/cm81xx.h b/arch/arm/mach-omap2/cm81xx.h new file mode 100644 index 000000000000..45cb407da222 --- /dev/null +++ b/arch/arm/mach-omap2/cm81xx.h @@ -0,0 +1,61 @@ +/* + * Clock domain register offsets for TI81XX. + * + * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/ + * Copyright (C) 2013 SKTB SKiT, http://www.skitlab.ru/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CM_TI81XX_H +#define __ARCH_ARM_MACH_OMAP2_CM_TI81XX_H + +/* TI81XX common CM module offsets */ +#define TI81XX_CM_ALWON_MOD 0x1400 /* 1KB */ + +/* TI816X CM module offsets */ +#define TI816X_CM_ACTIVE_MOD 0x0400 /* 256B */ +#define TI816X_CM_DEFAULT_MOD 0x0500 /* 256B */ +#define TI816X_CM_IVAHD0_MOD 0x0600 /* 256B */ +#define TI816X_CM_IVAHD1_MOD 0x0700 /* 256B */ +#define TI816X_CM_IVAHD2_MOD 0x0800 /* 256B */ +#define TI816X_CM_SGX_MOD 0x0900 /* 256B */ + +/* ALWON */ +#define TI81XX_CM_ALWON_L3_SLOW_CLKDM 0x0000 +#define TI81XX_CM_ALWON_L3_MED_CLKDM 0x0004 +#define TI81XX_CM_ETHERNET_CLKDM 0x0004 +#define TI81XX_CM_MMU_CLKDM 0x000C +#define TI81XX_CM_MMUCFG_CLKDM 0x0010 +#define TI81XX_CM_ALWON_MPU_CLKDM 0x001C +#define TI81XX_CM_ALWON_L3_FAST_CLKDM 0x0030 + +/* ACTIVE */ +#define TI816X_CM_ACTIVE_GEM_CLKDM 0x0000 + +/* IVAHD0 */ +#define TI816X_CM_IVAHD0_CLKDM 0x0000 + +/* IVAHD1 */ +#define TI816X_CM_IVAHD1_CLKDM 0x0000 + +/* IVAHD2 */ +#define TI816X_CM_IVAHD2_CLKDM 0x0000 + +/* SGX */ +#define TI816X_CM_SGX_CLKDM 0x0000 + +/* DEFAULT */ +#define TI816X_CM_DEFAULT_L3_MED_CLKDM 0x0004 +#define TI816X_CM_DEFAULT_PCI_CLKDM 0x0010 +#define TI816X_CM_DEFAULT_L3_SLOW_CLKDM 0x0014 +#define TI816X_CM_DEFAULT_DUCATI_CLKDM 0x0018 + +#endif diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 64e44d6d07c0..46e24581d624 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -35,6 +35,7 @@ #include <linux/irqchip/irq-omap-intc.h> #include <asm/proc-fns.h> +#include <asm/hardware/cache-l2x0.h> #include "i2c.h" #include "serial.h" @@ -94,11 +95,18 @@ extern void omap3_gptimer_timer_init(void); extern void omap4_local_timer_init(void); #ifdef CONFIG_CACHE_L2X0 int omap_l2_cache_init(void); +#define OMAP_L2C_AUX_CTRL (L2C_AUX_CTRL_SHARED_OVERRIDE | \ + L310_AUX_CTRL_DATA_PREFETCH | \ + L310_AUX_CTRL_INSTR_PREFETCH) +void omap4_l2c310_write_sec(unsigned long val, unsigned reg); #else static inline int omap_l2_cache_init(void) { return 0; } + +#define OMAP_L2C_AUX_CTRL 0 +#define omap4_l2c310_write_sec NULL #endif extern void omap5_realtime_timer_init(void); @@ -110,7 +118,8 @@ void omap3630_init_early(void); void omap3_init_early(void); /* Do not use this one */ void am33xx_init_early(void); void am35xx_init_early(void); -void ti81xx_init_early(void); +void ti814x_init_early(void); +void ti816x_init_early(void); void am33xx_init_early(void); void am43xx_init_early(void); void am43xx_init_late(void); @@ -163,6 +172,14 @@ static inline void omap3xxx_restart(enum reboot_mode mode, const char *cmd) } #endif +#ifdef CONFIG_SOC_TI81XX +void ti81xx_restart(enum reboot_mode mode, const char *cmd); +#else +static inline void ti81xx_restart(enum reboot_mode mode, const char *cmd) +{ +} +#endif + #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX) void omap44xx_restart(enum reboot_mode mode, const char *cmd); diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index a80ac2d70bb1..b8a487181210 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -53,6 +53,7 @@ #define OMAP343X_CONTROL_GENERAL_WKUP 0xa60 /* TI81XX spefic control submodules */ +#define TI81XX_CONTROL_DEVBOOT 0x040 #define TI81XX_CONTROL_DEVCONF 0x600 /* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */ @@ -246,6 +247,9 @@ #define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250 #define OMAP3_PADCONF_SAD2D_IDLEACK 0x254 +/* TI81XX CONTROL_DEVBOOT register offsets */ +#define TI81XX_CONTROL_STATUS (TI81XX_CONTROL_DEVBOOT + 0x000) + /* TI81XX CONTROL_DEVCONF register offsets */ #define TI81XX_CONTROL_DEVICE_ID (TI81XX_CONTROL_DEVCONF + 0x000) diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index c2da2a0fe5ad..44e57ec225d4 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -410,7 +410,7 @@ int omap3_noncore_dpll_enable(struct clk_hw *hw) struct clk_hw_omap *clk = to_clk_hw_omap(hw); int r; struct dpll_data *dd; - struct clk *parent; + struct clk_hw *parent; dd = clk->dpll_data; if (!dd) @@ -427,13 +427,13 @@ int omap3_noncore_dpll_enable(struct clk_hw *hw) } } - parent = __clk_get_parent(hw->clk); + parent = __clk_get_hw(__clk_get_parent(hw->clk)); if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) { - WARN_ON(parent != dd->clk_bypass); + WARN_ON(parent != __clk_get_hw(dd->clk_bypass)); r = _omap3_noncore_dpll_bypass(clk); } else { - WARN_ON(parent != dd->clk_ref); + WARN_ON(parent != __clk_get_hw(dd->clk_ref)); r = _omap3_noncore_dpll_lock(clk); } @@ -473,6 +473,8 @@ void omap3_noncore_dpll_disable(struct clk_hw *hw) * in failure. */ long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long rate, + unsigned long min_rate, + unsigned long max_rate, unsigned long *best_parent_rate, struct clk_hw **best_parent_clk) { @@ -549,7 +551,8 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, if (!dd) return -EINVAL; - if (__clk_get_parent(hw->clk) != dd->clk_ref) + if (__clk_get_hw(__clk_get_parent(hw->clk)) != + __clk_get_hw(dd->clk_ref)) return -EINVAL; if (dd->last_rounded_rate == 0) diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c index 0e58e5a85d53..f231be05b9a6 100644 --- a/arch/arm/mach-omap2/dpll44xx.c +++ b/arch/arm/mach-omap2/dpll44xx.c @@ -36,26 +36,6 @@ /* Static rate multiplier for OMAP4 REGM4XEN clocks */ #define OMAP4430_REGM4XEN_MULT 4 -/* Supported only on OMAP4 */ -int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk) -{ - u32 v; - u32 mask; - - if (!clk || !clk->clksel_reg) - return -EINVAL; - - mask = clk->flags & CLOCK_CLKOUTX2 ? - OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK : - OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK; - - v = omap2_clk_readl(clk, clk->clksel_reg); - v &= mask; - v >>= __ffs(mask); - - return v; -} - void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk) { u32 v; @@ -222,6 +202,8 @@ out: * in failure. */ long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw, unsigned long rate, + unsigned long min_rate, + unsigned long max_rate, unsigned long *best_parent_rate, struct clk_hw **best_parent_clk) { diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index c25feba05818..2a2f4d56e4c8 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -56,6 +56,8 @@ int omap_type(void) if (cpu_is_omap24xx()) { val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS); + } else if (cpu_is_ti81xx()) { + val = omap_ctrl_readl(TI81XX_CONTROL_STATUS); } else if (soc_is_am33xx() || soc_is_am43xx()) { val = omap_ctrl_readl(AM33XX_CONTROL_STATUS); } else if (cpu_is_omap34xx()) { diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index a1bd6affb508..c4871c55bd8b 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -461,7 +461,17 @@ void __init omap3_init_early(void) omap3xxx_clockdomains_init(); omap3xxx_hwmod_init(); omap_hwmod_init_postsetup(); - omap_clk_soc_init = omap3xxx_clk_init; + if (!of_have_populated_dt()) { + omap3_prcm_legacy_iomaps_init(); + if (soc_is_am35xx()) + omap_clk_soc_init = am35xx_clk_legacy_init; + else if (cpu_is_omap3630()) + omap_clk_soc_init = omap36xx_clk_legacy_init; + else if (omap_rev() == OMAP3430_REV_ES1_0) + omap_clk_soc_init = omap3430es1_clk_legacy_init; + else + omap_clk_soc_init = omap3430_clk_legacy_init; + } } void __init omap3430_init_early(void) @@ -492,27 +502,6 @@ void __init am35xx_init_early(void) omap_clk_soc_init = am35xx_dt_clk_init; } -void __init ti81xx_init_early(void) -{ - omap2_set_globals_tap(OMAP343X_CLASS, - OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE)); - omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE), - NULL); - omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE)); - omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL); - omap3xxx_check_revision(); - ti81xx_check_features(); - omap3xxx_voltagedomains_init(); - omap3xxx_powerdomains_init(); - omap3xxx_clockdomains_init(); - omap3xxx_hwmod_init(); - omap_hwmod_init_postsetup(); - if (of_have_populated_dt()) - omap_clk_soc_init = ti81xx_dt_clk_init; - else - omap_clk_soc_init = omap3xxx_clk_init; -} - void __init omap3_init_late(void) { omap_common_late_init(); @@ -551,11 +540,54 @@ void __init am35xx_init_late(void) void __init ti81xx_init_late(void) { omap_common_late_init(); - omap3_pm_init(); omap2_clk_enable_autoidle_all(); } #endif +#ifdef CONFIG_SOC_TI81XX +void __init ti814x_init_early(void) +{ + omap2_set_globals_tap(TI814X_CLASS, + OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE)); + omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE), + NULL); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL); + omap3xxx_check_revision(); + ti81xx_check_features(); + am33xx_prm_init(); + am33xx_cm_init(); + omap3xxx_voltagedomains_init(); + omap3xxx_powerdomains_init(); + ti81xx_clockdomains_init(); + ti81xx_hwmod_init(); + omap_hwmod_init_postsetup(); + if (of_have_populated_dt()) + omap_clk_soc_init = ti81xx_dt_clk_init; +} + +void __init ti816x_init_early(void) +{ + omap2_set_globals_tap(TI816X_CLASS, + OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE)); + omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE), + NULL); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL); + omap3xxx_check_revision(); + ti81xx_check_features(); + am33xx_prm_init(); + am33xx_cm_init(); + omap3xxx_voltagedomains_init(); + omap3xxx_powerdomains_init(); + ti81xx_clockdomains_init(); + ti81xx_hwmod_init(); + omap_hwmod_init_postsetup(); + if (of_have_populated_dt()) + omap_clk_soc_init = ti81xx_dt_clk_init; +} +#endif + #ifdef CONFIG_SOC_AM33XX void __init am33xx_init_early(void) { @@ -731,15 +763,17 @@ int __init omap_clk_init(void) ti_clk_init_features(); - ret = of_prcm_init(); - if (ret) - return ret; + if (of_have_populated_dt()) { + ret = of_prcm_init(); + if (ret) + return ret; - of_clk_init(NULL); + of_clk_init(NULL); - ti_dt_clk_init_retry_clks(); + ti_dt_clk_init_retry_clks(); - ti_dt_clockdomains_setup(); + ti_dt_clockdomains_setup(); + } ret = omap_clk_soc_init(); diff --git a/arch/arm/mach-omap2/omap-pm-noop.c b/arch/arm/mach-omap2/omap-pm-noop.c index 6a3be2bebddb..a1ee8066958e 100644 --- a/arch/arm/mach-omap2/omap-pm-noop.c +++ b/arch/arm/mach-omap2/omap-pm-noop.c @@ -86,200 +86,10 @@ int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r) return 0; } -int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev, - long t) -{ - if (!req_dev || !dev || t < -1) { - WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); - return -EINVAL; - } - - if (t == -1) - pr_debug("OMAP PM: remove max device latency constraint: dev %s\n", - dev_name(dev)); - else - pr_debug("OMAP PM: add max device latency constraint: dev %s, t = %ld usec\n", - dev_name(dev), t); - - /* - * For current Linux, this needs to map the device to a - * powerdomain, then go through the list of current max lat - * constraints on that powerdomain and find the smallest. If - * the latency constraint has changed, the code should - * recompute the state to enter for the next powerdomain - * state. Conceivably, this code should also determine - * whether to actually disable the device clocks or not, - * depending on how long it takes to re-enable the clocks. - * - * TI CDP code can call constraint_set here. - */ - - return 0; -} - -int omap_pm_set_max_sdma_lat(struct device *dev, long t) -{ - if (!dev || t < -1) { - WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); - return -EINVAL; - } - - if (t == -1) - pr_debug("OMAP PM: remove max DMA latency constraint: dev %s\n", - dev_name(dev)); - else - pr_debug("OMAP PM: add max DMA latency constraint: dev %s, t = %ld usec\n", - dev_name(dev), t); - - /* - * For current Linux PM QOS params, this code should scan the - * list of maximum CPU and DMA latencies and select the - * smallest, then set cpu_dma_latency pm_qos_param - * accordingly. - * - * For future Linux PM QOS params, with separate CPU and DMA - * latency params, this code should just set the dma_latency param. - * - * TI CDP code can call constraint_set here. - */ - - return 0; -} - -int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r) -{ - if (!dev || !c || r < 0) { - WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); - return -EINVAL; - } - - if (r == 0) - pr_debug("OMAP PM: remove min clk rate constraint: dev %s\n", - dev_name(dev)); - else - pr_debug("OMAP PM: add min clk rate constraint: dev %s, rate = %ld Hz\n", - dev_name(dev), r); - - /* - * Code in a real implementation should keep track of these - * constraints on the clock, and determine the highest minimum - * clock rate. It should iterate over each OPP and determine - * whether the OPP will result in a clock rate that would - * satisfy this constraint (and any other PM constraint in effect - * at that time). Once it finds the lowest-voltage OPP that - * meets those conditions, it should switch to it, or return - * an error if the code is not capable of doing so. - */ - - return 0; -} - /* * DSP Bridge-specific constraints */ -const struct omap_opp *omap_pm_dsp_get_opp_table(void) -{ - pr_debug("OMAP PM: DSP request for OPP table\n"); - - /* - * Return DSP frequency table here: The final item in the - * array should have .rate = .opp_id = 0. - */ - - return NULL; -} - -void omap_pm_dsp_set_min_opp(u8 opp_id) -{ - if (opp_id == 0) { - WARN_ON(1); - return; - } - - pr_debug("OMAP PM: DSP requests minimum VDD1 OPP to be %d\n", opp_id); - - /* - * - * For l-o dev tree, our VDD1 clk is keyed on OPP ID, so we - * can just test to see which is higher, the CPU's desired OPP - * ID or the DSP's desired OPP ID, and use whichever is - * highest. - * - * In CDP12.14+, the VDD1 OPP custom clock that controls the DSP - * rate is keyed on MPU speed, not the OPP ID. So we need to - * map the OPP ID to the MPU speed for use with clk_set_rate() - * if it is higher than the current OPP clock rate. - * - */ -} - - -u8 omap_pm_dsp_get_opp(void) -{ - pr_debug("OMAP PM: DSP requests current DSP OPP ID\n"); - - /* - * For l-o dev tree, call clk_get_rate() on VDD1 OPP clock - * - * CDP12.14+: - * Call clk_get_rate() on the OPP custom clock, map that to an - * OPP ID using the tables defined in board-*.c/chip-*.c files. - */ - - return 0; -} - -/* - * CPUFreq-originated constraint - * - * In the future, this should be handled by custom OPP clocktype - * functions. - */ - -struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void) -{ - pr_debug("OMAP PM: CPUFreq request for frequency table\n"); - - /* - * Return CPUFreq frequency table here: loop over - * all VDD1 clkrates, pull out the mpu_ck frequencies, build - * table - */ - - return NULL; -} - -void omap_pm_cpu_set_freq(unsigned long f) -{ - if (f == 0) { - WARN_ON(1); - return; - } - - pr_debug("OMAP PM: CPUFreq requests CPU frequency to be set to %lu\n", - f); - - /* - * For l-o dev tree, determine whether MPU freq or DSP OPP id - * freq is higher. Find the OPP ID corresponding to the - * higher frequency. Call clk_round_rate() and clk_set_rate() - * on the OPP custom clock. - * - * CDP should just be able to set the VDD1 OPP clock rate here. - */ -} - -unsigned long omap_pm_cpu_get_freq(void) -{ - pr_debug("OMAP PM: CPUFreq requests current CPU frequency\n"); - - /* - * Call clk_get_rate() on the mpu_ck. - */ - - return 0; -} /** * omap_pm_enable_off_mode - notify OMAP PM that off-mode is enabled @@ -363,9 +173,3 @@ int __init omap_pm_if_init(void) { return 0; } - -void omap_pm_if_exit(void) -{ - /* Deallocate CPUFreq frequency table here */ -} - diff --git a/arch/arm/mach-omap2/omap-pm.h b/arch/arm/mach-omap2/omap-pm.h index 1d777e63e05c..109bef5538eb 100644 --- a/arch/arm/mach-omap2/omap-pm.h +++ b/arch/arm/mach-omap2/omap-pm.h @@ -50,14 +50,6 @@ int __init omap_pm_if_early_init(void); */ int __init omap_pm_if_init(void); -/** - * omap_pm_if_exit - OMAP PM exit code - * - * Exit code; currently unused. The "_if_" is to avoid name - * collisions with the PM idle-loop code. - */ -void omap_pm_if_exit(void); - /* * Device-driver-originated constraints (via board-*.c files, platform_data) */ @@ -132,163 +124,6 @@ int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r); -/** - * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency - * @req_dev: struct device * requesting the constraint, or NULL if none - * @dev: struct device * to set the constraint one - * @t: maximum device wakeup latency in microseconds - * - * Request that the maximum amount of time necessary for a device @dev - * to become accessible after its clocks are enabled should be no - * greater than @t microseconds. Specifically, this represents the - * time from when a device driver enables device clocks with - * clk_enable(), to when the register reads and writes on the device - * will succeed. This function should be called before clk_disable() - * is called, since the power state transition decision may be made - * during clk_disable(). - * - * It is intended that underlying PM code will use this information to - * determine what power state to put the powerdomain enclosing this - * device into. - * - * Multiple calls to omap_pm_set_max_dev_wakeup_lat() will replace the - * previous wakeup latency values for this device. To remove the - * wakeup latency restriction for this device, call with t = -1. - * - * Returns -EINVAL for an invalid argument, -ERANGE if the constraint - * is not satisfiable, or 0 upon success. - */ -int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev, - long t); - - -/** - * omap_pm_set_max_sdma_lat - set the maximum system DMA transfer start latency - * @dev: struct device * - * @t: maximum DMA transfer start latency in microseconds - * - * Request that the maximum system DMA transfer start latency for this - * device 'dev' should be no greater than 't' microseconds. "DMA - * transfer start latency" here is defined as the elapsed time from - * when a device (e.g., McBSP) requests that a system DMA transfer - * start or continue, to the time at which data starts to flow into - * that device from the system DMA controller. - * - * It is intended that underlying PM code will use this information to - * determine what power state to put the CORE powerdomain into. - * - * Since system DMA transfers may not involve the MPU, this function - * will not affect MPU wakeup latency. Use set_max_cpu_lat() to do - * so. Similarly, this function will not affect device wakeup latency - * -- use set_max_dev_wakeup_lat() to affect that. - * - * Multiple calls to set_max_sdma_lat() will replace the previous t - * value for this device. To remove the maximum DMA latency for this - * device, call with t = -1. - * - * Returns -EINVAL for an invalid argument, -ERANGE if the constraint - * is not satisfiable, or 0 upon success. - */ -int omap_pm_set_max_sdma_lat(struct device *dev, long t); - - -/** - * omap_pm_set_min_clk_rate - set minimum clock rate requested by @dev - * @dev: struct device * requesting the constraint - * @clk: struct clk * to set the minimum rate constraint on - * @r: minimum rate in Hz - * - * Request that the minimum clock rate on the device @dev's clk @clk - * be no less than @r Hz. - * - * It is expected that the OMAP PM code will use this information to - * find an OPP or clock setting that will satisfy this clock rate - * constraint, along with any other applicable system constraints on - * the clock rate or corresponding voltage, etc. - * - * omap_pm_set_min_clk_rate() differs from the clock code's - * clk_set_rate() in that it considers other constraints before taking - * any hardware action, and may change a system OPP rather than just a - * clock rate. clk_set_rate() is intended to be a low-level - * interface. - * - * omap_pm_set_min_clk_rate() is easily open to abuse. A better API - * would be something like "omap_pm_set_min_dev_performance()"; - * however, there is no easily-generalizable concept of performance - * that applies to all devices. Only a device (and possibly the - * device subsystem) has both the subsystem-specific knowledge, and - * the hardware IP block-specific knowledge, to translate a constraint - * on "touchscreen sampling accuracy" or "number of pixels or polygons - * rendered per second" to a clock rate. This translation can be - * dependent on the hardware IP block's revision, or firmware version, - * and the driver is the only code on the system that has this - * information and can know how to translate that into a clock rate. - * - * The intended use-case for this function is for userspace or other - * kernel code to communicate a particular performance requirement to - * a subsystem; then for the subsystem to communicate that requirement - * to something that is meaningful to the device driver; then for the - * device driver to convert that requirement to a clock rate, and to - * then call omap_pm_set_min_clk_rate(). - * - * Users of this function (such as device drivers) should not simply - * call this function with some high clock rate to ensure "high - * performance." Rather, the device driver should take a performance - * constraint from its subsystem, such as "render at least X polygons - * per second," and use some formula or table to convert that into a - * clock rate constraint given the hardware type and hardware - * revision. Device drivers or subsystems should not assume that they - * know how to make a power/performance tradeoff - some device use - * cases may tolerate a lower-fidelity device function for lower power - * consumption; others may demand a higher-fidelity device function, - * no matter what the power consumption. - * - * Multiple calls to omap_pm_set_min_clk_rate() will replace the - * previous rate value for the device @dev. To remove the minimum clock - * rate constraint for the device, call with r = 0. - * - * Returns -EINVAL for an invalid argument, -ERANGE if the constraint - * is not satisfiable, or 0 upon success. - */ -int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r); - -/* - * DSP Bridge-specific constraints - */ - -/** - * omap_pm_dsp_get_opp_table - get OPP->DSP clock frequency table - * - * Intended for use by DSPBridge. Returns an array of OPP->DSP clock - * frequency entries. The final item in the array should have .rate = - * .opp_id = 0. - */ -const struct omap_opp *omap_pm_dsp_get_opp_table(void); - -/** - * omap_pm_dsp_set_min_opp - receive desired OPP target ID from DSP Bridge - * @opp_id: target DSP OPP ID - * - * Set a minimum OPP ID for the DSP. This is intended to be called - * only from the DSP Bridge MPU-side driver. Unfortunately, the only - * information that code receives from the DSP/BIOS load estimator is the - * target OPP ID; hence, this interface. No return value. - */ -void omap_pm_dsp_set_min_opp(u8 opp_id); - -/** - * omap_pm_dsp_get_opp - report the current DSP OPP ID - * - * Report the current OPP for the DSP. Since on OMAP3, the DSP and - * MPU share a single voltage domain, the OPP ID returned back may - * represent a higher DSP speed than the OPP requested via - * omap_pm_dsp_set_min_opp(). - * - * Returns the current VDD1 OPP ID, or 0 upon error. - */ -u8 omap_pm_dsp_get_opp(void); - - /* * CPUFreq-originated constraint * @@ -296,33 +131,6 @@ u8 omap_pm_dsp_get_opp(void); * functions. */ -/** - * omap_pm_cpu_get_freq_table - return a cpufreq_frequency_table array ptr - * - * Provide a frequency table usable by CPUFreq for the current chip/board. - * Returns a pointer to a struct cpufreq_frequency_table array or NULL - * upon error. - */ -struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void); - -/** - * omap_pm_cpu_set_freq - set the current minimum MPU frequency - * @f: MPU frequency in Hz - * - * Set the current minimum CPU frequency. The actual CPU frequency - * used could end up higher if the DSP requested a higher OPP. - * Intended to be called by plat-omap/cpu_omap.c:omap_target(). No - * return value. - */ -void omap_pm_cpu_set_freq(unsigned long f); - -/** - * omap_pm_cpu_get_freq - report the current CPU frequency - * - * Returns the current MPU frequency, or 0 upon error. - */ -unsigned long omap_pm_cpu_get_freq(void); - /* * Device context loss tracking diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index cc30e49a4cc2..cee0fe1ee6ff 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -166,7 +166,7 @@ void __iomem *omap4_get_l2cache_base(void) return l2cache_base; } -static void omap4_l2c310_write_sec(unsigned long val, unsigned reg) +void omap4_l2c310_write_sec(unsigned long val, unsigned reg) { unsigned smc_op; @@ -201,24 +201,10 @@ static void omap4_l2c310_write_sec(unsigned long val, unsigned reg) int __init omap_l2_cache_init(void) { - u32 aux_ctrl; - /* Static mapping, never released */ l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K); if (WARN_ON(!l2cache_base)) return -ENOMEM; - - /* 16-way associativity, parity disabled, way size - 64KB (es2.0 +) */ - aux_ctrl = L2C_AUX_CTRL_SHARED_OVERRIDE | - L310_AUX_CTRL_DATA_PREFETCH | - L310_AUX_CTRL_INSTR_PREFETCH; - - outer_cache.write_sec = omap4_l2c310_write_sec; - if (of_have_populated_dt()) - l2x0_of_init(aux_ctrl, 0xcf9fffff); - else - l2x0_init(l2cache_base, aux_ctrl, 0xcf9fffff); - return 0; } #endif @@ -256,7 +242,7 @@ static int __init omap4_sar_ram_init(void) } omap_early_initcall(omap4_sar_ram_init); -static struct of_device_id gic_match[] = { +static const struct of_device_id gic_match[] = { { .compatible = "arm,cortex-a9-gic", }, { .compatible = "arm,cortex-a15-gic", }, { }, diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 9025ffffd2dc..355b08936871 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1692,16 +1692,15 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) if (ret == -EBUSY) pr_warn("omap_hwmod: %s: failed to hardreset\n", oh->name); - if (!ret) { + if (oh->clkdm) { /* * Set the clockdomain to HW_AUTO, assuming that the * previous state was HW_AUTO. */ - if (oh->clkdm && hwsup) + if (hwsup) clkdm_allow_idle(oh->clkdm); - } else { - if (oh->clkdm) - clkdm_hwmod_disable(oh->clkdm, oh); + + clkdm_hwmod_disable(oh->clkdm, oh); } return ret; @@ -2155,8 +2154,8 @@ static int _enable(struct omap_hwmod *oh) if (soc_ops.disable_module) soc_ops.disable_module(oh); _disable_clocks(oh); - pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n", - oh->name, r); + pr_err("omap_hwmod: %s: _wait_target_ready failed: %d\n", + oh->name, r); if (oh->clkdm) clkdm_hwmod_disable(oh->clkdm, oh); @@ -2698,6 +2697,7 @@ static int __init _register(struct omap_hwmod *oh) INIT_LIST_HEAD(&oh->master_ports); INIT_LIST_HEAD(&oh->slave_ports); spin_lock_init(&oh->_lock); + lockdep_set_class(&oh->_lock, &oh->hwmod_key); oh->_state = _HWMOD_STATE_REGISTERED; @@ -3384,91 +3384,6 @@ int omap_hwmod_shutdown(struct omap_hwmod *oh) return 0; } -/** - * omap_hwmod_enable_clocks - enable main_clk, all interface clocks - * @oh: struct omap_hwmod *oh - * - * Intended to be called by the omap_device code. - */ -int omap_hwmod_enable_clocks(struct omap_hwmod *oh) -{ - unsigned long flags; - - spin_lock_irqsave(&oh->_lock, flags); - _enable_clocks(oh); - spin_unlock_irqrestore(&oh->_lock, flags); - - return 0; -} - -/** - * omap_hwmod_disable_clocks - disable main_clk, all interface clocks - * @oh: struct omap_hwmod *oh - * - * Intended to be called by the omap_device code. - */ -int omap_hwmod_disable_clocks(struct omap_hwmod *oh) -{ - unsigned long flags; - - spin_lock_irqsave(&oh->_lock, flags); - _disable_clocks(oh); - spin_unlock_irqrestore(&oh->_lock, flags); - - return 0; -} - -/** - * omap_hwmod_ocp_barrier - wait for posted writes against the hwmod to complete - * @oh: struct omap_hwmod *oh - * - * Intended to be called by drivers and core code when all posted - * writes to a device must complete before continuing further - * execution (for example, after clearing some device IRQSTATUS - * register bits) - * - * XXX what about targets with multiple OCP threads? - */ -void omap_hwmod_ocp_barrier(struct omap_hwmod *oh) -{ - BUG_ON(!oh); - - if (!oh->class->sysc || !oh->class->sysc->sysc_flags) { - WARN(1, "omap_device: %s: OCP barrier impossible due to device configuration\n", - oh->name); - return; - } - - /* - * Forces posted writes to complete on the OCP thread handling - * register writes - */ - omap_hwmod_read(oh, oh->class->sysc->sysc_offs); -} - -/** - * omap_hwmod_reset - reset the hwmod - * @oh: struct omap_hwmod * - * - * Under some conditions, a driver may wish to reset the entire device. - * Called from omap_device code. Returns -EINVAL on error or passes along - * the return value from _reset(). - */ -int omap_hwmod_reset(struct omap_hwmod *oh) -{ - int r; - unsigned long flags; - - if (!oh) - return -EINVAL; - - spin_lock_irqsave(&oh->_lock, flags); - r = _reset(oh); - spin_unlock_irqrestore(&oh->_lock, flags); - - return r; -} - /* * IP block data retrieval functions */ @@ -3729,52 +3644,12 @@ void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh) return oh->_mpu_rt_va; } -/** - * omap_hwmod_add_initiator_dep - add sleepdep from @init_oh to @oh - * @oh: struct omap_hwmod * - * @init_oh: struct omap_hwmod * (initiator) - * - * Add a sleep dependency between the initiator @init_oh and @oh. - * Intended to be called by DSP/Bridge code via platform_data for the - * DSP case; and by the DMA code in the sDMA case. DMA code, *Bridge - * code needs to add/del initiator dependencies dynamically - * before/after accessing a device. Returns the return value from - * _add_initiator_dep(). - * - * XXX Keep a usecount in the clockdomain code - */ -int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh, - struct omap_hwmod *init_oh) -{ - return _add_initiator_dep(oh, init_oh); -} - /* * XXX what about functions for drivers to save/restore ocp_sysconfig * for context save/restore operations? */ /** - * omap_hwmod_del_initiator_dep - remove sleepdep from @init_oh to @oh - * @oh: struct omap_hwmod * - * @init_oh: struct omap_hwmod * (initiator) - * - * Remove a sleep dependency between the initiator @init_oh and @oh. - * Intended to be called by DSP/Bridge code via platform_data for the - * DSP case; and by the DMA code in the sDMA case. DMA code, *Bridge - * code needs to add/del initiator dependencies dynamically - * before/after accessing a device. Returns the return value from - * _del_initiator_dep(). - * - * XXX Keep a usecount in the clockdomain code - */ -int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh, - struct omap_hwmod *init_oh) -{ - return _del_initiator_dep(oh, init_oh); -} - -/** * omap_hwmod_enable_wakeup - allow device to wake up the system * @oh: struct omap_hwmod * * @@ -3895,33 +3770,6 @@ int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name) } /** - * omap_hwmod_read_hardreset - read the HW reset line state of submodules - * contained in the hwmod module - * @oh: struct omap_hwmod * - * @name: name of the reset line to look up and read - * - * Return the current state of the hwmod @oh's reset line named @name: - * returns -EINVAL upon parameter error or if this operation - * is unsupported on the current OMAP; otherwise, passes along the return - * value from _read_hardreset(). - */ -int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name) -{ - int ret; - unsigned long flags; - - if (!oh) - return -EINVAL; - - spin_lock_irqsave(&oh->_lock, flags); - ret = _read_hardreset(oh, name); - spin_unlock_irqrestore(&oh->_lock, flags); - - return ret; -} - - -/** * omap_hwmod_for_each_by_class - call @fn for each hwmod of class @classname * @classname: struct omap_hwmod_class name to search for * @fn: callback function pointer to call for each hwmod in class @classname @@ -4031,86 +3879,6 @@ int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh) } /** - * omap_hwmod_no_setup_reset - prevent a hwmod from being reset upon setup - * @oh: struct omap_hwmod * - * - * Prevent the hwmod @oh from being reset during the setup process. - * Intended for use by board-*.c files on boards with devices that - * cannot tolerate being reset. Must be called before the hwmod has - * been set up. Returns 0 upon success or negative error code upon - * failure. - */ -int omap_hwmod_no_setup_reset(struct omap_hwmod *oh) -{ - if (!oh) - return -EINVAL; - - if (oh->_state != _HWMOD_STATE_REGISTERED) { - pr_err("omap_hwmod: %s: cannot prevent setup reset; in wrong state\n", - oh->name); - return -EINVAL; - } - - oh->flags |= HWMOD_INIT_NO_RESET; - - return 0; -} - -/** - * omap_hwmod_pad_route_irq - route an I/O pad wakeup to a particular MPU IRQ - * @oh: struct omap_hwmod * containing hwmod mux entries - * @pad_idx: array index in oh->mux of the hwmod mux entry to route wakeup - * @irq_idx: the hwmod mpu_irqs array index of the IRQ to trigger on wakeup - * - * When an I/O pad wakeup arrives for the dynamic or wakeup hwmod mux - * entry number @pad_idx for the hwmod @oh, trigger the interrupt - * service routine for the hwmod's mpu_irqs array index @irq_idx. If - * this function is not called for a given pad_idx, then the ISR - * associated with @oh's first MPU IRQ will be triggered when an I/O - * pad wakeup occurs on that pad. Note that @pad_idx is the index of - * the _dynamic or wakeup_ entry: if there are other entries not - * marked with OMAP_DEVICE_PAD_WAKEUP or OMAP_DEVICE_PAD_REMUX, these - * entries are NOT COUNTED in the dynamic pad index. This function - * must be called separately for each pad that requires its interrupt - * to be re-routed this way. Returns -EINVAL if there is an argument - * problem or if @oh does not have hwmod mux entries or MPU IRQs; - * returns -ENOMEM if memory cannot be allocated; or 0 upon success. - * - * XXX This function interface is fragile. Rather than using array - * indexes, which are subject to unpredictable change, it should be - * using hwmod IRQ names, and some other stable key for the hwmod mux - * pad records. - */ -int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx) -{ - int nr_irqs; - - might_sleep(); - - if (!oh || !oh->mux || !oh->mpu_irqs || pad_idx < 0 || - pad_idx >= oh->mux->nr_pads_dynamic) - return -EINVAL; - - /* Check the number of available mpu_irqs */ - for (nr_irqs = 0; oh->mpu_irqs[nr_irqs].irq >= 0; nr_irqs++) - ; - - if (irq_idx >= nr_irqs) - return -EINVAL; - - if (!oh->mux->irqs) { - /* XXX What frees this? */ - oh->mux->irqs = kzalloc(sizeof(int) * oh->mux->nr_pads_dynamic, - GFP_KERNEL); - if (!oh->mux->irqs) - return -ENOMEM; - } - oh->mux->irqs[pad_idx] = irq_idx; - - return 0; -} - -/** * omap_hwmod_init - initialize the hwmod code * * Sets up some function pointers needed by the hwmod code to operate on the @@ -4148,7 +3916,7 @@ void __init omap_hwmod_init(void) soc_ops.deassert_hardreset = _omap4_deassert_hardreset; soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted; soc_ops.init_clkdm = _init_clkdm; - } else if (soc_is_am33xx()) { + } else if (cpu_is_ti816x() || soc_is_am33xx()) { soc_ops.enable_module = _omap4_enable_module; soc_ops.disable_module = _omap4_disable_module; soc_ops.wait_target_ready = _omap4_wait_target_ready; diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 5b42fafcaf55..9611c91d9b82 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -674,6 +674,7 @@ struct omap_hwmod { u32 _sysc_cache; void __iomem *_mpu_rt_va; spinlock_t _lock; + struct lock_class_key hwmod_key; /* unique lock class */ struct list_head node; struct omap_hwmod_ocp_if *_mpu_port; unsigned int (*xlate_irq)(unsigned int); @@ -703,13 +704,6 @@ int omap_hwmod_shutdown(struct omap_hwmod *oh); int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name); int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name); -int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name); - -int omap_hwmod_enable_clocks(struct omap_hwmod *oh); -int omap_hwmod_disable_clocks(struct omap_hwmod *oh); - -int omap_hwmod_reset(struct omap_hwmod *oh); -void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs); u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs); @@ -724,11 +718,6 @@ int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type, struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh); void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh); -int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh, - struct omap_hwmod *init_oh); -int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh, - struct omap_hwmod *init_oh); - int omap_hwmod_enable_wakeup(struct omap_hwmod *oh); int omap_hwmod_disable_wakeup(struct omap_hwmod *oh); @@ -740,10 +729,6 @@ int omap_hwmod_for_each_by_class(const char *classname, int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state); int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh); -int omap_hwmod_no_setup_reset(struct omap_hwmod *oh); - -int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx); - extern void __init omap_hwmod_init(void); const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh); @@ -764,6 +749,7 @@ extern int omap3xxx_hwmod_init(void); extern int omap44xx_hwmod_init(void); extern int omap54xx_hwmod_init(void); extern int am33xx_hwmod_init(void); +extern int ti81xx_hwmod_init(void); extern int dra7xx_hwmod_init(void); int am43xx_hwmod_init(void); diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 11468eea3871..4e8e93c398db 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -29,8 +29,6 @@ #include <linux/platform_data/mailbox-omap.h> #include <plat/dmtimer.h> -#include "am35xx.h" - #include "soc.h" #include "omap_hwmod.h" #include "omap_hwmod_common_data.h" @@ -50,6 +48,8 @@ * elsewhere. */ +#define AM35XX_IPSS_USBOTGSS_BASE 0x5C040000 + /* * IP blocks */ @@ -3459,15 +3459,6 @@ static struct omap_hwmod_ocp_if am35xx_mdio__l3 = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space am35xx_mdio_addrs[] = { - { - .pa_start = AM35XX_IPSS_MDIO_BASE, - .pa_end = AM35XX_IPSS_MDIO_BASE + SZ_4K - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - /* l4_core -> davinci mdio */ /* * XXX Should be connected to an IPSS hwmod, not the L4_CORE directly; @@ -3478,25 +3469,15 @@ static struct omap_hwmod_ocp_if am35xx_l4_core__mdio = { .master = &omap3xxx_l4_core_hwmod, .slave = &am35xx_mdio_hwmod, .clk = "emac_fck", - .addr = am35xx_mdio_addrs, .user = OCP_USER_MPU, }; -static struct omap_hwmod_irq_info am35xx_emac_mpu_irqs[] = { - { .name = "rxthresh", .irq = 67 + OMAP_INTC_START, }, - { .name = "rx_pulse", .irq = 68 + OMAP_INTC_START, }, - { .name = "tx_pulse", .irq = 69 + OMAP_INTC_START }, - { .name = "misc_pulse", .irq = 70 + OMAP_INTC_START }, - { .irq = -1 }, -}; - static struct omap_hwmod_class am35xx_emac_class = { .name = "davinci_emac", }; static struct omap_hwmod am35xx_emac_hwmod = { .name = "davinci_emac", - .mpu_irqs = am35xx_emac_mpu_irqs, .class = &am35xx_emac_class, /* * According to Mark Greer, the MPU will not return from WFI @@ -3519,15 +3500,6 @@ static struct omap_hwmod_ocp_if am35xx_emac__l3 = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space am35xx_emac_addrs[] = { - { - .pa_start = AM35XX_IPSS_EMAC_BASE, - .pa_end = AM35XX_IPSS_EMAC_BASE + 0x30000 - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - /* l4_core -> davinci emac */ /* * XXX Should be connected to an IPSS hwmod, not the L4_CORE directly; @@ -3538,7 +3510,6 @@ static struct omap_hwmod_ocp_if am35xx_l4_core__emac = { .master = &omap3xxx_l4_core_hwmod, .slave = &am35xx_emac_hwmod, .clk = "emac_ick", - .addr = am35xx_emac_addrs, .user = OCP_USER_MPU, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index 5c6c8410160e..8eb85925e444 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -498,6 +498,7 @@ static struct omap_hwmod am43xx_dss_dispc_hwmod = { }, }, .dev_attr = &am43xx_dss_dispc_dev_attr, + .parent_hwmod = &am43xx_dss_core_hwmod, }; /* rfbi */ @@ -512,6 +513,7 @@ static struct omap_hwmod am43xx_dss_rfbi_hwmod = { .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET, }, }, + .parent_hwmod = &am43xx_dss_core_hwmod, }; /* Interfaces */ diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index ffd6604cd546..16fe7a1b7a35 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -819,7 +819,8 @@ static struct omap_hwmod dra7xx_gpmc_hwmod = { .name = "gpmc", .class = &dra7xx_gpmc_hwmod_class, .clkdm_name = "l3main1_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | + HWMOD_SWSUP_SIDLE), .main_clk = "l3_iclk_div", .prcm = { .omap4 = { @@ -1465,55 +1466,18 @@ static struct omap_hwmod dra7xx_ocp2scp3_hwmod = { * */ -static struct omap_hwmod_class dra7xx_pcie_hwmod_class = { +static struct omap_hwmod_class dra7xx_pciess_hwmod_class = { .name = "pcie", }; /* pcie1 */ -static struct omap_hwmod dra7xx_pcie1_hwmod = { +static struct omap_hwmod dra7xx_pciess1_hwmod = { .name = "pcie1", - .class = &dra7xx_pcie_hwmod_class, + .class = &dra7xx_pciess_hwmod_class, .clkdm_name = "pcie_clkdm", .main_clk = "l4_root_clk_div", .prcm = { .omap4 = { - .clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* pcie2 */ -static struct omap_hwmod dra7xx_pcie2_hwmod = { - .name = "pcie2", - .class = &dra7xx_pcie_hwmod_class, - .clkdm_name = "pcie_clkdm", - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'PCIE PHY' class - * - */ - -static struct omap_hwmod_class dra7xx_pcie_phy_hwmod_class = { - .name = "pcie-phy", -}; - -/* pcie1 phy */ -static struct omap_hwmod dra7xx_pcie1_phy_hwmod = { - .name = "pcie1-phy", - .class = &dra7xx_pcie_phy_hwmod_class, - .clkdm_name = "l3init_clkdm", - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET, .context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET, .modulemode = MODULEMODE_SWCTRL, @@ -1521,11 +1485,11 @@ static struct omap_hwmod dra7xx_pcie1_phy_hwmod = { }, }; -/* pcie2 phy */ -static struct omap_hwmod dra7xx_pcie2_phy_hwmod = { - .name = "pcie2-phy", - .class = &dra7xx_pcie_phy_hwmod_class, - .clkdm_name = "l3init_clkdm", +/* pcie2 */ +static struct omap_hwmod dra7xx_pciess2_hwmod = { + .name = "pcie2", + .class = &dra7xx_pciess_hwmod_class, + .clkdm_name = "pcie_clkdm", .main_clk = "l4_root_clk_div", .prcm = { .omap4 = { @@ -2017,7 +1981,7 @@ static struct omap_hwmod dra7xx_uart3_hwmod = { .class = &dra7xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", .main_clk = "uart3_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = HWMOD_SWSUP_SIDLE_ACT | DEBUG_OMAP4UART3_FLAGS, .prcm = { .omap4 = { .clkctrl_offs = DRA7XX_CM_L4PER_UART3_CLKCTRL_OFFSET, @@ -2876,50 +2840,34 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp3 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3_main_1 -> pcie1 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie1 = { +/* l3_main_1 -> pciess1 */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess1 = { .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_pcie1_hwmod, + .slave = &dra7xx_pciess1_hwmod, .clk = "l3_iclk_div", .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_cfg -> pcie1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1 = { +/* l4_cfg -> pciess1 */ +static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess1 = { .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_pcie1_hwmod, + .slave = &dra7xx_pciess1_hwmod, .clk = "l4_root_clk_div", .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3_main_1 -> pcie2 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie2 = { +/* l3_main_1 -> pciess2 */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess2 = { .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_pcie2_hwmod, + .slave = &dra7xx_pciess2_hwmod, .clk = "l3_iclk_div", .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_cfg -> pcie2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2 = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_pcie2_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> pcie1 phy */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1_phy = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_pcie1_phy_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> pcie2 phy */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2_phy = { +/* l4_cfg -> pciess2 */ +static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess2 = { .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_pcie2_phy_hwmod, + .slave = &dra7xx_pciess2_hwmod, .clk = "l4_root_clk_div", .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3326,12 +3274,10 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_cfg__mpu, &dra7xx_l4_cfg__ocp2scp1, &dra7xx_l4_cfg__ocp2scp3, - &dra7xx_l3_main_1__pcie1, - &dra7xx_l4_cfg__pcie1, - &dra7xx_l3_main_1__pcie2, - &dra7xx_l4_cfg__pcie2, - &dra7xx_l4_cfg__pcie1_phy, - &dra7xx_l4_cfg__pcie2_phy, + &dra7xx_l3_main_1__pciess1, + &dra7xx_l4_cfg__pciess1, + &dra7xx_l3_main_1__pciess2, + &dra7xx_l4_cfg__pciess2, &dra7xx_l3_main_1__qspi, &dra7xx_l4_per3__rtcss, &dra7xx_l4_cfg__sata, diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c new file mode 100644 index 000000000000..cab1eb61ac96 --- /dev/null +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -0,0 +1,1136 @@ +/* + * DM81xx hwmod data. + * + * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/ + * Copyright (C) 2013 SKTB SKiT, http://www.skitlab.ru/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/hsmmc-omap.h> +#include <linux/platform_data/spi-omap2-mcspi.h> +#include <plat/dmtimer.h> + +#include "omap_hwmod_common_data.h" +#include "cm81xx.h" +#include "ti81xx.h" +#include "wd_timer.h" + +/* + * DM816X hardware modules integration data + * + * Note: This is incomplete and at present, not generated from h/w database. + */ + +/* + * The alwon .clkctrl_offs field is offset from the CM_ALWON, that's + * TRM 18.7.17 CM_ALWON device register values minus 0x1400. + */ +#define DM816X_DM_ALWON_BASE 0x1400 +#define DM816X_CM_ALWON_MCASP0_CLKCTRL (0x1540 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_MCASP1_CLKCTRL (0x1544 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_MCASP2_CLKCTRL (0x1548 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_MCBSP_CLKCTRL (0x154c - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_UART_0_CLKCTRL (0x1550 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_UART_1_CLKCTRL (0x1554 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_UART_2_CLKCTRL (0x1558 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_GPIO_0_CLKCTRL (0x155c - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_GPIO_1_CLKCTRL (0x1560 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_I2C_0_CLKCTRL (0x1564 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_I2C_1_CLKCTRL (0x1568 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_TIMER_1_CLKCTRL (0x1570 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_TIMER_2_CLKCTRL (0x1574 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_TIMER_3_CLKCTRL (0x1578 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_TIMER_4_CLKCTRL (0x157c - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_TIMER_5_CLKCTRL (0x1580 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_TIMER_6_CLKCTRL (0x1584 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_TIMER_7_CLKCTRL (0x1588 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_WDTIMER_CLKCTRL (0x158c - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_SPI_CLKCTRL (0x1590 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_MAILBOX_CLKCTRL (0x1594 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_SPINBOX_CLKCTRL (0x1598 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_MMUDATA_CLKCTRL (0x159c - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_MMUCFG_CLKCTRL (0x15a8 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_SDIO_CLKCTRL (0x15b0 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_OCMC_0_CLKCTRL (0x15b4 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_OCMC_1_CLKCTRL (0x15b8 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_CONTRL_CLKCTRL (0x15c4 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_GPMC_CLKCTRL (0x15d0 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_ETHERNET_0_CLKCTRL (0x15d4 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_ETHERNET_1_CLKCTRL (0x15d8 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_MPU_CLKCTRL (0x15dc - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_L3_CLKCTRL (0x15e4 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_L4HS_CLKCTRL (0x15e8 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_L4LS_CLKCTRL (0x15ec - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_RTC_CLKCTRL (0x15f0 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_TPCC_CLKCTRL (0x15f4 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_TPTC0_CLKCTRL (0x15f8 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_TPTC1_CLKCTRL (0x15fc - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_TPTC2_CLKCTRL (0x1600 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_TPTC3_CLKCTRL (0x1604 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_SR_0_CLKCTRL (0x1608 - DM816X_DM_ALWON_BASE) +#define DM816X_CM_ALWON_SR_1_CLKCTRL (0x160c - DM816X_DM_ALWON_BASE) + +/* + * The default .clkctrl_offs field is offset from CM_DEFAULT, that's + * TRM 18.7.6 CM_DEFAULT device register values minus 0x500 + */ +#define DM816X_CM_DEFAULT_OFFSET 0x500 +#define DM816X_CM_DEFAULT_USB_CLKCTRL (0x558 - DM816X_CM_DEFAULT_OFFSET) + +/* L3 Interconnect entries clocked at 125, 250 and 500MHz */ +static struct omap_hwmod dm816x_alwon_l3_slow_hwmod = { + .name = "alwon_l3_slow", + .clkdm_name = "alwon_l3s_clkdm", + .class = &l3_hwmod_class, + .flags = HWMOD_NO_IDLEST, +}; + +static struct omap_hwmod dm816x_default_l3_slow_hwmod = { + .name = "default_l3_slow", + .clkdm_name = "default_l3_slow_clkdm", + .class = &l3_hwmod_class, + .flags = HWMOD_NO_IDLEST, +}; + +static struct omap_hwmod dm816x_alwon_l3_med_hwmod = { + .name = "l3_med", + .clkdm_name = "alwon_l3_med_clkdm", + .class = &l3_hwmod_class, + .flags = HWMOD_NO_IDLEST, +}; + +static struct omap_hwmod dm816x_alwon_l3_fast_hwmod = { + .name = "l3_fast", + .clkdm_name = "alwon_l3_fast_clkdm", + .class = &l3_hwmod_class, + .flags = HWMOD_NO_IDLEST, +}; + +/* + * L4 standard peripherals, see TRM table 1-12 for devices using this. + * See TRM table 1-73 for devices using the 125MHz SYSCLK6 clock. + */ +static struct omap_hwmod dm816x_l4_ls_hwmod = { + .name = "l4_ls", + .clkdm_name = "alwon_l3s_clkdm", + .class = &l4_hwmod_class, +}; + +/* + * L4 high-speed peripherals. For devices using this, please see the TRM + * table 1-13. On dm816x, only EMAC, MDIO and SATA use this. See also TRM + * table 1-73 for devices using 250MHz SYSCLK5 clock. + */ +static struct omap_hwmod dm816x_l4_hs_hwmod = { + .name = "l4_hs", + .clkdm_name = "alwon_l3_med_clkdm", + .class = &l4_hwmod_class, +}; + +/* L3 slow -> L4 ls peripheral interface running at 125MHz */ +static struct omap_hwmod_ocp_if dm816x_alwon_l3_slow__l4_ls = { + .master = &dm816x_alwon_l3_slow_hwmod, + .slave = &dm816x_l4_ls_hwmod, + .user = OCP_USER_MPU, +}; + +/* L3 med -> L4 fast peripheral interface running at 250MHz */ +static struct omap_hwmod_ocp_if dm816x_alwon_l3_slow__l4_hs = { + .master = &dm816x_alwon_l3_med_hwmod, + .slave = &dm816x_l4_hs_hwmod, + .user = OCP_USER_MPU, +}; + +/* MPU */ +static struct omap_hwmod dm816x_mpu_hwmod = { + .name = "mpu", + .clkdm_name = "alwon_mpu_clkdm", + .class = &mpu_hwmod_class, + .flags = HWMOD_INIT_NO_IDLE, + .main_clk = "mpu_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_MPU_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod_ocp_if dm816x_mpu__alwon_l3_slow = { + .master = &dm816x_mpu_hwmod, + .slave = &dm816x_alwon_l3_slow_hwmod, + .user = OCP_USER_MPU, +}; + +/* L3 med peripheral interface running at 250MHz */ +static struct omap_hwmod_ocp_if dm816x_mpu__alwon_l3_med = { + .master = &dm816x_mpu_hwmod, + .slave = &dm816x_alwon_l3_med_hwmod, + .user = OCP_USER_MPU, +}; + +/* UART common */ +static struct omap_hwmod_class_sysconfig uart_sysc = { + .rev_offs = 0x50, + .sysc_offs = 0x54, + .syss_offs = 0x58, + .sysc_flags = SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS, + .idlemodes = SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_SMART_WKUP, + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class uart_class = { + .name = "uart", + .sysc = &uart_sysc, +}; + +static struct omap_hwmod dm816x_uart1_hwmod = { + .name = "uart1", + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "sysclk10_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_UART_0_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .class = &uart_class, + .flags = DEBUG_TI81XXUART1_FLAGS, +}; + +static struct omap_hwmod_ocp_if dm816x_l4_ls__uart1 = { + .master = &dm816x_l4_ls_hwmod, + .slave = &dm816x_uart1_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod dm816x_uart2_hwmod = { + .name = "uart2", + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "sysclk10_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_UART_1_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .class = &uart_class, + .flags = DEBUG_TI81XXUART2_FLAGS, +}; + +static struct omap_hwmod_ocp_if dm816x_l4_ls__uart2 = { + .master = &dm816x_l4_ls_hwmod, + .slave = &dm816x_uart2_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod dm816x_uart3_hwmod = { + .name = "uart3", + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "sysclk10_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_UART_2_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .class = &uart_class, + .flags = DEBUG_TI81XXUART3_FLAGS, +}; + +static struct omap_hwmod_ocp_if dm816x_l4_ls__uart3 = { + .master = &dm816x_l4_ls_hwmod, + .slave = &dm816x_uart3_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_class_sysconfig wd_timer_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x10, + .syss_offs = 0x14, + .sysc_flags = SYSC_HAS_EMUFREE | SYSC_HAS_SOFTRESET | + SYSS_HAS_RESET_STATUS, + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class wd_timer_class = { + .name = "wd_timer", + .sysc = &wd_timer_sysc, + .pre_shutdown = &omap2_wd_timer_disable, + .reset = &omap2_wd_timer_reset, +}; + +static struct omap_hwmod dm816x_wd_timer_hwmod = { + .name = "wd_timer", + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "sysclk18_ck", + .flags = HWMOD_NO_IDLEST, + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_WDTIMER_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .class = &wd_timer_class, +}; + +static struct omap_hwmod_ocp_if dm816x_l4_ls__wd_timer1 = { + .master = &dm816x_l4_ls_hwmod, + .slave = &dm816x_wd_timer_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + +/* I2C common */ +static struct omap_hwmod_class_sysconfig i2c_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x10, + .syss_offs = 0x90, + .sysc_flags = SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE, + .idlemodes = SIDLE_FORCE | SIDLE_NO | SIDLE_SMART, + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class i2c_class = { + .name = "i2c", + .sysc = &i2c_sysc, +}; + +static struct omap_hwmod dm81xx_i2c1_hwmod = { + .name = "i2c1", + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "sysclk10_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_I2C_0_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .class = &i2c_class, +}; + +static struct omap_hwmod_ocp_if dm816x_l4_ls__i2c1 = { + .master = &dm816x_l4_ls_hwmod, + .slave = &dm81xx_i2c1_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod dm816x_i2c2_hwmod = { + .name = "i2c2", + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "sysclk10_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_I2C_1_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .class = &i2c_class, +}; + +static struct omap_hwmod_class_sysconfig dm81xx_elm_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | + SYSS_HAS_RESET_STATUS, + .idlemodes = SIDLE_FORCE | SIDLE_NO | SIDLE_SMART, + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_ocp_if dm816x_l4_ls__i2c2 = { + .master = &dm816x_l4_ls_hwmod, + .slave = &dm816x_i2c2_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_class dm81xx_elm_hwmod_class = { + .name = "elm", + .sysc = &dm81xx_elm_sysc, +}; + +static struct omap_hwmod dm81xx_elm_hwmod = { + .name = "elm", + .clkdm_name = "alwon_l3s_clkdm", + .class = &dm81xx_elm_hwmod_class, + .main_clk = "sysclk6_ck", +}; + +static struct omap_hwmod_ocp_if dm81xx_l4_ls__elm = { + .master = &dm816x_l4_ls_hwmod, + .slave = &dm81xx_elm_hwmod, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_class_sysconfig dm81xx_gpio_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0114, + .sysc_flags = SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSS_HAS_RESET_STATUS, + .idlemodes = SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP, + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class dm81xx_gpio_hwmod_class = { + .name = "gpio", + .sysc = &dm81xx_gpio_sysc, + .rev = 2, +}; + +static struct omap_gpio_dev_attr gpio_dev_attr = { + .bank_width = 32, + .dbck_flag = true, +}; + +static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { + { .role = "dbclk", .clk = "sysclk18_ck" }, +}; + +static struct omap_hwmod dm81xx_gpio1_hwmod = { + .name = "gpio1", + .clkdm_name = "alwon_l3s_clkdm", + .class = &dm81xx_gpio_hwmod_class, + .main_clk = "sysclk6_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_GPIO_0_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .opt_clks = gpio1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks), + .dev_attr = &gpio_dev_attr, +}; + +static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio1 = { + .master = &dm816x_l4_ls_hwmod, + .slave = &dm81xx_gpio1_hwmod, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { + { .role = "dbclk", .clk = "sysclk18_ck" }, +}; + +static struct omap_hwmod dm81xx_gpio2_hwmod = { + .name = "gpio2", + .clkdm_name = "alwon_l3s_clkdm", + .class = &dm81xx_gpio_hwmod_class, + .main_clk = "sysclk6_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_GPIO_1_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .opt_clks = gpio2_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks), + .dev_attr = &gpio_dev_attr, +}; + +static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio2 = { + .master = &dm816x_l4_ls_hwmod, + .slave = &dm81xx_gpio2_hwmod, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_class_sysconfig dm81xx_gpmc_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x10, + .syss_offs = 0x14, + .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS, + .idlemodes = SIDLE_FORCE | SIDLE_NO | SIDLE_SMART, + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class dm81xx_gpmc_hwmod_class = { + .name = "gpmc", + .sysc = &dm81xx_gpmc_sysc, +}; + +static struct omap_hwmod dm81xx_gpmc_hwmod = { + .name = "gpmc", + .clkdm_name = "alwon_l3s_clkdm", + .class = &dm81xx_gpmc_hwmod_class, + .main_clk = "sysclk6_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_GPMC_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__gpmc = { + .master = &dm816x_alwon_l3_slow_hwmod, + .slave = &dm81xx_gpmc_hwmod, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_class_sysconfig dm81xx_usbhsotg_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x10, + .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET, + .idlemodes = SIDLE_SMART | MSTANDBY_FORCE | MSTANDBY_SMART, + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class dm81xx_usbotg_class = { + .name = "usbotg", + .sysc = &dm81xx_usbhsotg_sysc, +}; + +static struct omap_hwmod dm81xx_usbss_hwmod = { + .name = "usb_otg_hs", + .clkdm_name = "default_l3_slow_clkdm", + .main_clk = "sysclk6_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_DEFAULT_USB_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .class = &dm81xx_usbotg_class, +}; + +static struct omap_hwmod_ocp_if dm81xx_default_l3_slow__usbss = { + .master = &dm816x_default_l3_slow_hwmod, + .slave = &dm81xx_usbss_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_class_sysconfig dm816x_timer_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET, + .idlemodes = SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP, + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class dm816x_timer_hwmod_class = { + .name = "timer", + .sysc = &dm816x_timer_sysc, +}; + +static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = { + .timer_capability = OMAP_TIMER_ALWON, +}; + +static struct omap_hwmod dm816x_timer1_hwmod = { + .name = "timer1", + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "timer1_fck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_TIMER_1_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &capability_alwon_dev_attr, + .class = &dm816x_timer_hwmod_class, +}; + +static struct omap_hwmod_ocp_if dm816x_l4_ls__timer1 = { + .master = &dm816x_l4_ls_hwmod, + .slave = &dm816x_timer1_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod dm816x_timer2_hwmod = { + .name = "timer2", + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "timer2_fck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_TIMER_2_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &capability_alwon_dev_attr, + .class = &dm816x_timer_hwmod_class, +}; + +static struct omap_hwmod_ocp_if dm816x_l4_ls__timer2 = { + .master = &dm816x_l4_ls_hwmod, + .slave = &dm816x_timer2_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod dm816x_timer3_hwmod = { + .name = "timer3", + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "timer3_fck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_TIMER_3_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &capability_alwon_dev_attr, + .class = &dm816x_timer_hwmod_class, +}; + +static struct omap_hwmod_ocp_if dm816x_l4_ls__timer3 = { + .master = &dm816x_l4_ls_hwmod, + .slave = &dm816x_timer3_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod dm816x_timer4_hwmod = { + .name = "timer4", + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "timer4_fck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_TIMER_4_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &capability_alwon_dev_attr, + .class = &dm816x_timer_hwmod_class, +}; + +static struct omap_hwmod_ocp_if dm816x_l4_ls__timer4 = { + .master = &dm816x_l4_ls_hwmod, + .slave = &dm816x_timer4_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod dm816x_timer5_hwmod = { + .name = "timer5", + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "timer5_fck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_TIMER_5_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &capability_alwon_dev_attr, + .class = &dm816x_timer_hwmod_class, +}; + +static struct omap_hwmod_ocp_if dm816x_l4_ls__timer5 = { + .master = &dm816x_l4_ls_hwmod, + .slave = &dm816x_timer5_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod dm816x_timer6_hwmod = { + .name = "timer6", + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "timer6_fck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_TIMER_6_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &capability_alwon_dev_attr, + .class = &dm816x_timer_hwmod_class, +}; + +static struct omap_hwmod_ocp_if dm816x_l4_ls__timer6 = { + .master = &dm816x_l4_ls_hwmod, + .slave = &dm816x_timer6_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod dm816x_timer7_hwmod = { + .name = "timer7", + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "timer7_fck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_TIMER_7_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &capability_alwon_dev_attr, + .class = &dm816x_timer_hwmod_class, +}; + +static struct omap_hwmod_ocp_if dm816x_l4_ls__timer7 = { + .master = &dm816x_l4_ls_hwmod, + .slave = &dm816x_timer7_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + +/* EMAC Ethernet */ +static struct omap_hwmod_class_sysconfig dm816x_emac_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x4, + .sysc_flags = SYSC_HAS_SOFTRESET, + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class dm816x_emac_hwmod_class = { + .name = "emac", + .sysc = &dm816x_emac_sysc, +}; + +/* + * On dm816x the MDIO is within EMAC0. As the MDIO driver is a separate + * driver probed before EMAC0, we let MDIO do the clock idling. + */ +static struct omap_hwmod dm816x_emac0_hwmod = { + .name = "emac0", + .clkdm_name = "alwon_ethernet_clkdm", + .class = &dm816x_emac_hwmod_class, +}; + +static struct omap_hwmod_ocp_if dm816x_l4_hs__emac0 = { + .master = &dm816x_l4_hs_hwmod, + .slave = &dm816x_emac0_hwmod, + .clk = "sysclk5_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_class dm816x_mdio_hwmod_class = { + .name = "davinci_mdio", + .sysc = &dm816x_emac_sysc, +}; + +struct omap_hwmod dm816x_emac0_mdio_hwmod = { + .name = "davinci_mdio", + .class = &dm816x_mdio_hwmod_class, + .clkdm_name = "alwon_ethernet_clkdm", + .main_clk = "sysclk24_ck", + .flags = HWMOD_NO_IDLEST, + /* + * REVISIT: This should be moved to the emac0_hwmod + * once we have a better way to handle device slaves. + */ + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_ETHERNET_0_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +struct omap_hwmod_ocp_if dm816x_emac0__mdio = { + .master = &dm816x_l4_hs_hwmod, + .slave = &dm816x_emac0_mdio_hwmod, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod dm816x_emac1_hwmod = { + .name = "emac1", + .clkdm_name = "alwon_ethernet_clkdm", + .main_clk = "sysclk24_ck", + .flags = HWMOD_NO_IDLEST, + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_ETHERNET_1_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .class = &dm816x_emac_hwmod_class, +}; + +static struct omap_hwmod_ocp_if dm816x_l4_hs__emac1 = { + .master = &dm816x_l4_hs_hwmod, + .slave = &dm816x_emac1_hwmod, + .clk = "sysclk5_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_class_sysconfig dm816x_mmc_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x110, + .syss_offs = 0x114, + .sysc_flags = SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS, + .idlemodes = SIDLE_FORCE | SIDLE_NO | SIDLE_SMART, + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class dm816x_mmc_class = { + .name = "mmc", + .sysc = &dm816x_mmc_sysc, +}; + +static struct omap_hwmod_opt_clk dm816x_mmc1_opt_clks[] = { + { .role = "dbck", .clk = "sysclk18_ck", }, +}; + +static struct omap_hsmmc_dev_attr mmc1_dev_attr = { + .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, +}; + +static struct omap_hwmod dm816x_mmc1_hwmod = { + .name = "mmc1", + .clkdm_name = "alwon_l3s_clkdm", + .opt_clks = dm816x_mmc1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dm816x_mmc1_opt_clks), + .main_clk = "sysclk10_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_SDIO_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &mmc1_dev_attr, + .class = &dm816x_mmc_class, +}; + +static struct omap_hwmod_ocp_if dm816x_l4_ls__mmc1 = { + .master = &dm816x_l4_ls_hwmod, + .slave = &dm816x_mmc1_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, + .flags = OMAP_FIREWALL_L4 +}; + +static struct omap_hwmod_class_sysconfig dm816x_mcspi_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x110, + .syss_offs = 0x114, + .sysc_flags = SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS, + .idlemodes = SIDLE_FORCE | SIDLE_NO | SIDLE_SMART, + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class dm816x_mcspi_class = { + .name = "mcspi", + .sysc = &dm816x_mcspi_sysc, + .rev = OMAP3_MCSPI_REV, +}; + +static struct omap2_mcspi_dev_attr dm816x_mcspi1_dev_attr = { + .num_chipselect = 4, +}; + +static struct omap_hwmod dm816x_mcspi1_hwmod = { + .name = "mcspi1", + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "sysclk10_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_SPI_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .class = &dm816x_mcspi_class, + .dev_attr = &dm816x_mcspi1_dev_attr, +}; + +static struct omap_hwmod_ocp_if dm816x_l4_ls__mcspi1 = { + .master = &dm816x_l4_ls_hwmod, + .slave = &dm816x_mcspi1_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_class_sysconfig dm816x_mailbox_sysc = { + .rev_offs = 0x000, + .sysc_offs = 0x010, + .syss_offs = 0x014, + .sysc_flags = SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE, + .idlemodes = SIDLE_FORCE | SIDLE_NO | SIDLE_SMART, + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class dm816x_mailbox_hwmod_class = { + .name = "mailbox", + .sysc = &dm816x_mailbox_sysc, +}; + +static struct omap_hwmod dm816x_mailbox_hwmod = { + .name = "mailbox", + .clkdm_name = "alwon_l3s_clkdm", + .class = &dm816x_mailbox_hwmod_class, + .main_clk = "sysclk6_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_MAILBOX_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod_ocp_if dm816x_l4_ls__mailbox = { + .master = &dm816x_l4_ls_hwmod, + .slave = &dm816x_mailbox_hwmod, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_class dm816x_tpcc_hwmod_class = { + .name = "tpcc", +}; + +struct omap_hwmod dm816x_tpcc_hwmod = { + .name = "tpcc", + .class = &dm816x_tpcc_hwmod_class, + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "sysclk4_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_TPCC_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +struct omap_hwmod_ocp_if dm816x_alwon_l3_fast__tpcc = { + .master = &dm816x_alwon_l3_fast_hwmod, + .slave = &dm816x_tpcc_hwmod, + .clk = "sysclk4_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space dm816x_tptc0_addr_space[] = { + { + .pa_start = 0x49800000, + .pa_end = 0x49800000 + SZ_8K - 1, + .flags = ADDR_TYPE_RT, + }, + { }, +}; + +static struct omap_hwmod_class dm816x_tptc0_hwmod_class = { + .name = "tptc0", +}; + +struct omap_hwmod dm816x_tptc0_hwmod = { + .name = "tptc0", + .class = &dm816x_tptc0_hwmod_class, + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "sysclk4_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_TPTC0_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +struct omap_hwmod_ocp_if dm816x_alwon_l3_fast__tptc0 = { + .master = &dm816x_alwon_l3_fast_hwmod, + .slave = &dm816x_tptc0_hwmod, + .clk = "sysclk4_ck", + .addr = dm816x_tptc0_addr_space, + .user = OCP_USER_MPU, +}; + +struct omap_hwmod_ocp_if dm816x_tptc0__alwon_l3_fast = { + .master = &dm816x_tptc0_hwmod, + .slave = &dm816x_alwon_l3_fast_hwmod, + .clk = "sysclk4_ck", + .addr = dm816x_tptc0_addr_space, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space dm816x_tptc1_addr_space[] = { + { + .pa_start = 0x49900000, + .pa_end = 0x49900000 + SZ_8K - 1, + .flags = ADDR_TYPE_RT, + }, + { }, +}; + +static struct omap_hwmod_class dm816x_tptc1_hwmod_class = { + .name = "tptc1", +}; + +struct omap_hwmod dm816x_tptc1_hwmod = { + .name = "tptc1", + .class = &dm816x_tptc1_hwmod_class, + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "sysclk4_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_TPTC1_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +struct omap_hwmod_ocp_if dm816x_alwon_l3_fast__tptc1 = { + .master = &dm816x_alwon_l3_fast_hwmod, + .slave = &dm816x_tptc1_hwmod, + .clk = "sysclk4_ck", + .addr = dm816x_tptc1_addr_space, + .user = OCP_USER_MPU, +}; + +struct omap_hwmod_ocp_if dm816x_tptc1__alwon_l3_fast = { + .master = &dm816x_tptc1_hwmod, + .slave = &dm816x_alwon_l3_fast_hwmod, + .clk = "sysclk4_ck", + .addr = dm816x_tptc1_addr_space, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space dm816x_tptc2_addr_space[] = { + { + .pa_start = 0x49a00000, + .pa_end = 0x49a00000 + SZ_8K - 1, + .flags = ADDR_TYPE_RT, + }, + { }, +}; + +static struct omap_hwmod_class dm816x_tptc2_hwmod_class = { + .name = "tptc2", +}; + +struct omap_hwmod dm816x_tptc2_hwmod = { + .name = "tptc2", + .class = &dm816x_tptc2_hwmod_class, + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "sysclk4_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_TPTC2_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +struct omap_hwmod_ocp_if dm816x_alwon_l3_fast__tptc2 = { + .master = &dm816x_alwon_l3_fast_hwmod, + .slave = &dm816x_tptc2_hwmod, + .clk = "sysclk4_ck", + .addr = dm816x_tptc2_addr_space, + .user = OCP_USER_MPU, +}; + +struct omap_hwmod_ocp_if dm816x_tptc2__alwon_l3_fast = { + .master = &dm816x_tptc2_hwmod, + .slave = &dm816x_alwon_l3_fast_hwmod, + .clk = "sysclk4_ck", + .addr = dm816x_tptc2_addr_space, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space dm816x_tptc3_addr_space[] = { + { + .pa_start = 0x49b00000, + .pa_end = 0x49b00000 + SZ_8K - 1, + .flags = ADDR_TYPE_RT, + }, + { }, +}; + +static struct omap_hwmod_class dm816x_tptc3_hwmod_class = { + .name = "tptc3", +}; + +struct omap_hwmod dm816x_tptc3_hwmod = { + .name = "tptc3", + .class = &dm816x_tptc3_hwmod_class, + .clkdm_name = "alwon_l3s_clkdm", + .main_clk = "sysclk4_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM816X_CM_ALWON_TPTC3_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +struct omap_hwmod_ocp_if dm816x_alwon_l3_fast__tptc3 = { + .master = &dm816x_alwon_l3_fast_hwmod, + .slave = &dm816x_tptc3_hwmod, + .clk = "sysclk4_ck", + .addr = dm816x_tptc3_addr_space, + .user = OCP_USER_MPU, +}; + +struct omap_hwmod_ocp_if dm816x_tptc3__alwon_l3_fast = { + .master = &dm816x_tptc3_hwmod, + .slave = &dm816x_alwon_l3_fast_hwmod, + .clk = "sysclk4_ck", + .addr = dm816x_tptc3_addr_space, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = { + &dm816x_mpu__alwon_l3_slow, + &dm816x_mpu__alwon_l3_med, + &dm816x_alwon_l3_slow__l4_ls, + &dm816x_alwon_l3_slow__l4_hs, + &dm816x_l4_ls__uart1, + &dm816x_l4_ls__uart2, + &dm816x_l4_ls__uart3, + &dm816x_l4_ls__wd_timer1, + &dm816x_l4_ls__i2c1, + &dm816x_l4_ls__i2c2, + &dm81xx_l4_ls__gpio1, + &dm81xx_l4_ls__gpio2, + &dm81xx_l4_ls__elm, + &dm816x_l4_ls__mmc1, + &dm816x_l4_ls__timer1, + &dm816x_l4_ls__timer2, + &dm816x_l4_ls__timer3, + &dm816x_l4_ls__timer4, + &dm816x_l4_ls__timer5, + &dm816x_l4_ls__timer6, + &dm816x_l4_ls__timer7, + &dm816x_l4_ls__mcspi1, + &dm816x_l4_ls__mailbox, + &dm816x_l4_hs__emac0, + &dm816x_emac0__mdio, + &dm816x_l4_hs__emac1, + &dm816x_alwon_l3_fast__tpcc, + &dm816x_alwon_l3_fast__tptc0, + &dm816x_alwon_l3_fast__tptc1, + &dm816x_alwon_l3_fast__tptc2, + &dm816x_alwon_l3_fast__tptc3, + &dm816x_tptc0__alwon_l3_fast, + &dm816x_tptc1__alwon_l3_fast, + &dm816x_tptc2__alwon_l3_fast, + &dm816x_tptc3__alwon_l3_fast, + &dm81xx_alwon_l3_slow__gpmc, + &dm81xx_default_l3_slow__usbss, + NULL, +}; + +int __init ti81xx_hwmod_init(void) +{ + omap_hwmod_init(); + return omap_hwmod_register_links(dm816x_hwmod_ocp_ifs); +} diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 1a19fa096bab..8e903564ede2 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -152,38 +152,3 @@ void am35x_set_mode(u8 musb_mode) omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2); } - -void ti81xx_musb_phy_power(u8 on) -{ - void __iomem *scm_base = NULL; - u32 usbphycfg; - - scm_base = ioremap(TI81XX_SCM_BASE, SZ_2K); - if (!scm_base) { - pr_err("system control module ioremap failed\n"); - return; - } - - usbphycfg = readl_relaxed(scm_base + USBCTRL0); - - if (on) { - if (cpu_is_ti816x()) { - usbphycfg |= TI816X_USBPHY0_NORMAL_MODE; - usbphycfg &= ~TI816X_USBPHY_REFCLK_OSC; - } else if (cpu_is_ti814x()) { - usbphycfg &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN - | USBPHY_DPINPUT | USBPHY_DMINPUT); - usbphycfg |= (USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN - | USBPHY_DPOPBUFCTL | USBPHY_DMOPBUFCTL); - } - } else { - if (cpu_is_ti816x()) - usbphycfg &= ~TI816X_USBPHY0_NORMAL_MODE; - else if (cpu_is_ti814x()) - usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN; - - } - writel_relaxed(usbphycfg, scm_base + USBCTRL0); - - iounmap(scm_base); -} diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 3d7eee1d3cfa..e642b079e9f3 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -19,7 +19,6 @@ #include <linux/platform_data/pinctrl-single.h> #include <linux/platform_data/iommu-omap.h> -#include "am35xx.h" #include "common.h" #include "common-board-devices.h" #include "dss-common.h" @@ -174,6 +173,7 @@ static void __init omap3_igep0030_rev_g_legacy_init(void) static void __init omap3_evm_legacy_init(void) { + hsmmc2_internal_input_clk(); legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 149); } diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c index 33c8846b4193..a69e9a33cb6d 100644 --- a/arch/arm/mach-omap2/pmu.c +++ b/arch/arm/mach-omap2/pmu.c @@ -13,7 +13,7 @@ */ #include <linux/of.h> -#include <asm/pmu.h> +#include <asm/system_info.h> #include "soc.h" #include "omap_hwmod.h" @@ -37,7 +37,8 @@ static int __init omap2_init_pmu(unsigned oh_num, char *oh_names[]) { int i; struct omap_hwmod *oh[3]; - char *dev_name = "arm-pmu"; + char *dev_name = cpu_architecture() == CPU_ARCH_ARMv6 ? + "armv6-pmu" : "armv7-pmu"; if ((!oh_num) || (oh_num > 3)) return -EINVAL; diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 7fb033eca0a5..78af6d8cf2e2 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -115,7 +115,6 @@ static int _pwrdm_register(struct powerdomain *pwrdm) } pwrdm->voltdm.ptr = voltdm; INIT_LIST_HEAD(&pwrdm->voltdm_node); - voltdm_add_pwrdm(voltdm, pwrdm); skip_voltdm: spin_lock_init(&pwrdm->_lock); @@ -484,87 +483,6 @@ pac_exit: } /** - * pwrdm_del_clkdm - remove a clockdomain from a powerdomain - * @pwrdm: struct powerdomain * to add the clockdomain to - * @clkdm: struct clockdomain * to associate with a powerdomain - * - * Dissociate the clockdomain @clkdm from the powerdomain - * @pwrdm. Returns -EINVAL if presented with invalid pointers; -ENOENT - * if @clkdm was not associated with the powerdomain, or 0 upon - * success. - */ -int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm) -{ - int ret = -EINVAL; - int i; - - if (!pwrdm || !clkdm) - return -EINVAL; - - pr_debug("powerdomain: %s: dissociating clockdomain %s\n", - pwrdm->name, clkdm->name); - - for (i = 0; i < PWRDM_MAX_CLKDMS; i++) - if (pwrdm->pwrdm_clkdms[i] == clkdm) - break; - - if (i == PWRDM_MAX_CLKDMS) { - pr_debug("powerdomain: %s: clkdm %s not associated?!\n", - pwrdm->name, clkdm->name); - ret = -ENOENT; - goto pdc_exit; - } - - pwrdm->pwrdm_clkdms[i] = NULL; - - ret = 0; - -pdc_exit: - return ret; -} - -/** - * pwrdm_for_each_clkdm - call function on each clkdm in a pwrdm - * @pwrdm: struct powerdomain * to iterate over - * @fn: callback function * - * - * Call the supplied function @fn for each clockdomain in the powerdomain - * @pwrdm. The callback function can return anything but 0 to bail - * out early from the iterator. Returns -EINVAL if presented with - * invalid pointers; or passes along the last return value of the - * callback function, which should be 0 for success or anything else - * to indicate failure. - */ -int pwrdm_for_each_clkdm(struct powerdomain *pwrdm, - int (*fn)(struct powerdomain *pwrdm, - struct clockdomain *clkdm)) -{ - int ret = 0; - int i; - - if (!fn) - return -EINVAL; - - for (i = 0; i < PWRDM_MAX_CLKDMS && !ret; i++) - if (pwrdm->pwrdm_clkdms[i]) - ret = (*fn)(pwrdm, pwrdm->pwrdm_clkdms[i]); - - return ret; -} - -/** - * pwrdm_get_voltdm - return a ptr to the voltdm that this pwrdm resides in - * @pwrdm: struct powerdomain * - * - * Return a pointer to the struct voltageomain that the specified powerdomain - * @pwrdm exists in. - */ -struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm) -{ - return pwrdm->voltdm.ptr; -} - -/** * pwrdm_get_mem_bank_count - get number of memory banks in this powerdomain * @pwrdm: struct powerdomain * * diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 11bd4dd7d8d6..28a796ce07d7 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -212,11 +212,6 @@ int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user), void *user); int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm); -int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm); -int pwrdm_for_each_clkdm(struct powerdomain *pwrdm, - int (*fn)(struct powerdomain *pwrdm, - struct clockdomain *clkdm)); -struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm); int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm); diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index 328c1037cb60..70bc7066a4c2 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -464,7 +464,7 @@ void __init omap3xxx_powerdomains_init(void) { unsigned int rev; - if (!cpu_is_omap34xx()) + if (!cpu_is_omap34xx() && !cpu_is_ti81xx()) return; pwrdm_register_platform_funcs(&omap3_pwrdm_operations); diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index 77752e49d8d4..b9061a6a2db8 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -20,6 +20,7 @@ extern void __iomem *prm_base; extern u16 prm_features; extern void omap2_set_globals_prm(void __iomem *prm); int of_prcm_init(void); +void omap3_prcm_legacy_iomaps_init(void); # endif /* diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index c5e00c6714b1..5713bbdf83bc 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -674,7 +674,7 @@ int __init omap3xxx_prm_init(void) return prm_register(&omap3xxx_prm_ll_data); } -static struct of_device_id omap3_prm_dt_match_table[] = { +static const struct of_device_id omap3_prm_dt_match_table[] = { { .compatible = "ti,omap3-prm" }, { } }; diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h index cfde3f4a03cc..ed8a3d8b739a 100644 --- a/arch/arm/mach-omap2/prm3xxx.h +++ b/arch/arm/mach-omap2/prm3xxx.h @@ -145,7 +145,6 @@ extern void omap3_prm_vcvp_write(u32 val, u8 offset); extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); extern int __init omap3xxx_prm_init(void); -extern u32 omap3xxx_prm_get_reset_sources(void); int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits); void omap3xxx_prm_iva_idle(void); void omap3_prm_reset_modem(void); diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 408c64efb807..d6d6bc39e05c 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -252,10 +252,10 @@ static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask) { saved_mask[0] = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, - OMAP4_PRM_IRQSTATUS_MPU_OFFSET); + OMAP4_PRM_IRQENABLE_MPU_OFFSET); saved_mask[1] = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, - OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET); + OMAP4_PRM_IRQENABLE_MPU_2_OFFSET); omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_OFFSET); @@ -712,7 +712,7 @@ int __init omap44xx_prm_init(void) return prm_register(&omap44xx_prm_ll_data); } -static struct of_device_id omap_prm_dt_match_table[] = { +static const struct of_device_id omap_prm_dt_match_table[] = { { .compatible = "ti,omap4-prm" }, { .compatible = "ti,omap5-prm" }, { .compatible = "ti,dra7-prm" }, diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h index f7512515fde5..714329565b90 100644 --- a/arch/arm/mach-omap2/prm44xx_54xx.h +++ b/arch/arm/mach-omap2/prm44xx_54xx.h @@ -39,7 +39,6 @@ extern void omap4_prm_vcvp_write(u32 val, u8 offset); extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); extern int __init omap44xx_prm_init(void); -extern u32 omap44xx_prm_get_reset_sources(void); #endif diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index dea2833ca627..bfaa7ba595cc 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -35,6 +35,8 @@ #include "prm44xx.h" #include "common.h" #include "clock.h" +#include "cm.h" +#include "control.h" /* * OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs @@ -581,6 +583,10 @@ static const struct of_device_id omap_prcm_dt_match_table[] = { { .compatible = "ti,am3-scrm" }, { .compatible = "ti,am4-prcm" }, { .compatible = "ti,am4-scrm" }, + { .compatible = "ti,dm814-prcm" }, + { .compatible = "ti,dm814-scrm" }, + { .compatible = "ti,dm816-prcm" }, + { .compatible = "ti,dm816-scrm" }, { .compatible = "ti,omap2-prcm" }, { .compatible = "ti,omap2-scrm" }, { .compatible = "ti,omap3-prm" }, @@ -637,6 +643,15 @@ int __init of_prcm_init(void) return 0; } +void __init omap3_prcm_legacy_iomaps_init(void) +{ + ti_clk_ll_ops = &omap_clk_ll_ops; + + clk_memmaps[TI_CLKM_CM] = cm_base + OMAP3430_IVA2_MOD; + clk_memmaps[TI_CLKM_PRM] = prm_base + OMAP3430_IVA2_MOD; + clk_memmaps[TI_CLKM_SCRM] = omap_ctrl_base_get(); +} + static int __init prm_late_init(void) { if (prm_ll_data->late_init) diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index c1a3b4416311..f97654d11ea5 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -423,13 +423,13 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8)) #define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8)) -#define TI816X_CLASS 0x81600034 +#define TI816X_CLASS 0x81600081 #define TI8168_REV_ES1_0 TI816X_CLASS #define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8)) #define TI8168_REV_ES2_0 (TI816X_CLASS | (0x2 << 8)) #define TI8168_REV_ES2_1 (TI816X_CLASS | (0x3 << 8)) -#define TI814X_CLASS 0x81400034 +#define TI814X_CLASS 0x81400081 #define TI8148_REV_ES1_0 TI814X_CLASS #define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8)) #define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8)) diff --git a/arch/arm/mach-omap2/ti81xx-restart.c b/arch/arm/mach-omap2/ti81xx-restart.c new file mode 100644 index 000000000000..6c3ce7c46ddd --- /dev/null +++ b/arch/arm/mach-omap2/ti81xx-restart.c @@ -0,0 +1,34 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/reboot.h> + +#include "iomap.h" +#include "common.h" +#include "control.h" +#include "prm3xxx.h" + +#define TI81XX_PRM_DEVICE_RSTCTRL 0x00a0 +#define TI81XX_GLOBAL_RST_COLD BIT(1) + +/** + * ti81xx_restart - trigger a software restart of the SoC + * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c + * @cmd: passed from the userspace program rebooting the system (if provided) + * + * Resets the SoC. For @cmd, see the 'reboot' syscall in + * kernel/sys.c. No return value. + * + * NOTE: Warm reset does not seem to work, may require resetting + * clocks to bypass mode. + */ +void ti81xx_restart(enum reboot_mode mode, const char *cmd) +{ + omap2_prm_set_mod_reg_bits(TI81XX_GLOBAL_RST_COLD, 0, + TI81XX_PRM_DEVICE_RSTCTRL); + while (1); +} diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 7d45c84c69ba..cef67af9e9b8 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -147,6 +147,8 @@ static const struct of_device_id omap_timer_match[] __initconst = { { .compatible = "ti,omap3430-timer", }, { .compatible = "ti,omap4430-timer", }, { .compatible = "ti,omap5430-timer", }, + { .compatible = "ti,dm814-timer", }, + { .compatible = "ti,dm816-timer", }, { .compatible = "ti,am335x-timer", }, { .compatible = "ti,am335x-timer-1ms", }, { } diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index bc897231bd10..e4562b2b973b 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -82,16 +82,8 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) musb_plat.mode = board_data->mode; musb_plat.extvbus = board_data->extvbus; - if (soc_is_am35xx()) { - oh_name = "am35x_otg_hs"; - name = "musb-am35x"; - } else if (cpu_is_ti81xx()) { - oh_name = "usb_otg_hs"; - name = "musb-ti81xx"; - } else { - oh_name = "usb_otg_hs"; - name = "musb-omap2430"; - } + oh_name = "usb_otg_hs"; + name = "musb-omap2430"; oh = omap_hwmod_lookup(oh_name); if (WARN(!oh, "%s: could not find omap_hwmod for %s\n", diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h index 4ba2ae759895..3395365ef1db 100644 --- a/arch/arm/mach-omap2/usb.h +++ b/arch/arm/mach-omap2/usb.h @@ -68,5 +68,3 @@ extern void am35x_musb_reset(void); extern void am35x_musb_phy_power(u8 on); extern void am35x_musb_clear_irq(void); extern void am35x_set_mode(u8 musb_mode); -extern void ti81xx_musb_phy_power(u8 on); - diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 3783b8625f0f..cba8cada8c81 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -224,37 +224,6 @@ int omap_voltage_register_pmic(struct voltagedomain *voltdm, } /** - * omap_change_voltscale_method() - API to change the voltage scaling method. - * @voltdm: pointer to the VDD whose voltage scaling method - * has to be changed. - * @voltscale_method: the method to be used for voltage scaling. - * - * This API can be used by the board files to change the method of voltage - * scaling between vpforceupdate and vcbypass. The parameter values are - * defined in voltage.h - */ -void omap_change_voltscale_method(struct voltagedomain *voltdm, - int voltscale_method) -{ - if (!voltdm || IS_ERR(voltdm)) { - pr_warn("%s: VDD specified does not exist!\n", __func__); - return; - } - - switch (voltscale_method) { - case VOLTSCALE_VPFORCEUPDATE: - voltdm->scale = omap_vp_forceupdate_scale; - return; - case VOLTSCALE_VCBYPASS: - voltdm->scale = omap_vc_bypass_scale; - return; - default: - pr_warn("%s: Trying to change the method of voltage scaling to an unsupported one!\n", - __func__); - } -} - -/** * omap_voltage_late_init() - Init the various voltage parameters * * This API is to be called in the later stages of the @@ -316,90 +285,11 @@ static struct voltagedomain *_voltdm_lookup(const char *name) return voltdm; } -/** - * voltdm_add_pwrdm - add a powerdomain to a voltagedomain - * @voltdm: struct voltagedomain * to add the powerdomain to - * @pwrdm: struct powerdomain * to associate with a voltagedomain - * - * Associate the powerdomain @pwrdm with a voltagedomain @voltdm. This - * enables the use of voltdm_for_each_pwrdm(). Returns -EINVAL if - * presented with invalid pointers; -ENOMEM if memory could not be allocated; - * or 0 upon success. - */ -int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm) -{ - if (!voltdm || !pwrdm) - return -EINVAL; - - pr_debug("voltagedomain: %s: associating powerdomain %s\n", - voltdm->name, pwrdm->name); - - list_add(&pwrdm->voltdm_node, &voltdm->pwrdm_list); - - return 0; -} - -/** - * voltdm_for_each_pwrdm - call function for each pwrdm in a voltdm - * @voltdm: struct voltagedomain * to iterate over - * @fn: callback function * - * - * Call the supplied function @fn for each powerdomain in the - * voltagedomain @voltdm. Returns -EINVAL if presented with invalid - * pointers; or passes along the last return value of the callback - * function, which should be 0 for success or anything else to - * indicate failure. - */ -int voltdm_for_each_pwrdm(struct voltagedomain *voltdm, - int (*fn)(struct voltagedomain *voltdm, - struct powerdomain *pwrdm)) -{ - struct powerdomain *pwrdm; - int ret = 0; - - if (!fn) - return -EINVAL; - - list_for_each_entry(pwrdm, &voltdm->pwrdm_list, voltdm_node) - ret = (*fn)(voltdm, pwrdm); - - return ret; -} - -/** - * voltdm_for_each - call function on each registered voltagedomain - * @fn: callback function * - * - * Call the supplied function @fn for each registered voltagedomain. - * The callback function @fn can return anything but 0 to bail out - * early from the iterator. Returns the last return value of the - * callback function, which should be 0 for success or anything else - * to indicate failure; or -EINVAL if the function pointer is null. - */ -int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user), - void *user) -{ - struct voltagedomain *temp_voltdm; - int ret = 0; - - if (!fn) - return -EINVAL; - - list_for_each_entry(temp_voltdm, &voltdm_list, node) { - ret = (*fn)(temp_voltdm, user); - if (ret) - break; - } - - return ret; -} - static int _voltdm_register(struct voltagedomain *voltdm) { if (!voltdm || !voltdm->name) return -EINVAL; - INIT_LIST_HEAD(&voltdm->pwrdm_list); list_add(&voltdm->node, &voltdm_list); pr_debug("voltagedomain: registered %s\n", voltdm->name); diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index f7f2879b31b0..e64550321510 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -23,10 +23,6 @@ struct powerdomain; -/* XXX document */ -#define VOLTSCALE_VPFORCEUPDATE 1 -#define VOLTSCALE_VCBYPASS 2 - /* * OMAP3 GENERIC setup times. Revisit to see if these needs to be * passed from board or PMIC file @@ -55,7 +51,6 @@ struct omap_vfsm_instance { * @name: Name of the voltage domain which can be used as a unique identifier. * @scalable: Whether or not this voltage domain is scalable * @node: list_head linking all voltage domains - * @pwrdm_list: list_head linking all powerdomains in this voltagedomain * @vc: pointer to VC channel associated with this voltagedomain * @vp: pointer to VP associated with this voltagedomain * @read: read a VC/VP register @@ -71,7 +66,6 @@ struct voltagedomain { char *name; bool scalable; struct list_head node; - struct list_head pwrdm_list; struct omap_vc_channel *vc; const struct omap_vfsm_instance *vfsm; struct omap_vp_instance *vp; @@ -163,8 +157,6 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, unsigned long volt); int omap_voltage_register_pmic(struct voltagedomain *voltdm, struct omap_voltdm_pmic *pmic); -void omap_change_voltscale_method(struct voltagedomain *voltdm, - int voltscale_method); int omap_voltage_late_init(void); extern void omap2xxx_voltagedomains_init(void); @@ -175,11 +167,6 @@ extern void omap54xx_voltagedomains_init(void); struct voltagedomain *voltdm_lookup(const char *name); void voltdm_init(struct voltagedomain **voltdm_list); int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm); -int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user), - void *user); -int voltdm_for_each_pwrdm(struct voltagedomain *voltdm, - int (*fn)(struct voltagedomain *voltdm, - struct powerdomain *pwrdm)); int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt); void voltdm_reset(struct voltagedomain *voltdm); unsigned long voltdm_get_voltage(struct voltagedomain *voltdm); diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index 042f693ef423..e03d8b5c9ad0 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -11,7 +11,7 @@ menuconfig ARCH_SIRF if ARCH_SIRF -comment "CSR SiRF atlas6/primaII/Marco/Polo Specific Features" +comment "CSR SiRF atlas6/primaII/Atlas7 Specific Features" config ARCH_ATLAS6 bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform" @@ -20,6 +20,16 @@ config ARCH_ATLAS6 help Support for CSR SiRFSoC ARM Cortex A9 Platform +config ARCH_ATLAS7 + bool "CSR SiRFSoC ATLAS7 ARM Cortex A7 Platform" + default y + select ARM_GIC + select CPU_V7 + select HAVE_ARM_SCU if SMP + select HAVE_SMP + help + Support for CSR SiRFSoC ARM Cortex A7 Platform + config ARCH_PRIMA2 bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" default y @@ -28,15 +38,6 @@ config ARCH_PRIMA2 help Support for CSR SiRFSoC ARM Cortex A9 Platform -config ARCH_MARCO - bool "CSR SiRFSoC MARCO ARM Cortex A9 Platform" - default y - select ARM_GIC - select HAVE_ARM_SCU if SMP - select SMP_ON_UP if SMP - help - Support for CSR SiRFSoC ARM Cortex A9 Platform - config SIRF_IRQ bool diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile index 8846e7d87ea5..d7d02b043449 100644 --- a/arch/arm/mach-prima2/Makefile +++ b/arch/arm/mach-prima2/Makefile @@ -1,7 +1,6 @@ obj-y += rstc.o obj-y += common.o obj-y += rtciobrg.o -obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_SUSPEND) += pm.o sleep.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c index a860ea27e8ae..8cadb302a7d2 100644 --- a/arch/arm/mach-prima2/common.c +++ b/arch/arm/mach-prima2/common.c @@ -20,14 +20,8 @@ static void __init sirfsoc_init_late(void) sirfsoc_pm_init(); } -static __init void sirfsoc_map_io(void) -{ - sirfsoc_map_lluart(); - sirfsoc_map_scu(); -} - #ifdef CONFIG_ARCH_ATLAS6 -static const char *atlas6_dt_match[] __initconst = { +static const char *const atlas6_dt_match[] __initconst = { "sirf,atlas6", NULL }; @@ -36,14 +30,13 @@ DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ .l2c_aux_val = 0, .l2c_aux_mask = ~0, - .map_io = sirfsoc_map_io, .init_late = sirfsoc_init_late, .dt_compat = atlas6_dt_match, MACHINE_END #endif #ifdef CONFIG_ARCH_PRIMA2 -static const char *prima2_dt_match[] __initconst = { +static const char *const prima2_dt_match[] __initconst = { "sirf,prima2", NULL }; @@ -52,26 +45,21 @@ DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ .l2c_aux_val = 0, .l2c_aux_mask = ~0, - .map_io = sirfsoc_map_io, .dma_zone_size = SZ_256M, .init_late = sirfsoc_init_late, .dt_compat = prima2_dt_match, MACHINE_END #endif -#ifdef CONFIG_ARCH_MARCO -static const char *marco_dt_match[] __initconst = { - "sirf,marco", +#ifdef CONFIG_ARCH_ATLAS7 +static const char *const atlas7_dt_match[] __initconst = { + "sirf,atlas7", NULL }; -DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)") +DT_MACHINE_START(ATLAS7_DT, "Generic ATLAS7 (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ - .l2c_aux_val = 0, - .l2c_aux_mask = ~0, .smp = smp_ops(sirfsoc_smp_ops), - .map_io = sirfsoc_map_io, - .init_late = sirfsoc_init_late, - .dt_compat = marco_dt_match, + .dt_compat = atlas7_dt_match, MACHINE_END #endif diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h index 07d3e5ed9264..3916a6665100 100644 --- a/arch/arm/mach-prima2/common.h +++ b/arch/arm/mach-prima2/common.h @@ -15,9 +15,6 @@ #include <asm/mach/time.h> #include <asm/exception.h> -#define SIRFSOC_VA_BASE _AC(0xFEC00000, UL) -#define SIRFSOC_VA(x) (SIRFSOC_VA_BASE + ((x) & 0x00FFF000)) - extern struct smp_operations sirfsoc_smp_ops; extern void sirfsoc_secondary_startup(void); extern void sirfsoc_cpu_die(unsigned int cpu); @@ -25,18 +22,6 @@ extern void sirfsoc_cpu_die(unsigned int cpu); extern void __init sirfsoc_of_irq_init(void); extern asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs); -#ifndef CONFIG_DEBUG_LL -static inline void sirfsoc_map_lluart(void) {} -#else -extern void __init sirfsoc_map_lluart(void); -#endif - -#ifndef CONFIG_SMP -static inline void sirfsoc_map_scu(void) {} -#else -extern void sirfsoc_map_scu(void); -#endif - #ifdef CONFIG_SUSPEND extern int sirfsoc_pm_init(void); #else diff --git a/arch/arm/mach-prima2/lluart.c b/arch/arm/mach-prima2/lluart.c deleted file mode 100644 index 99c0c927ca4a..000000000000 --- a/arch/arm/mach-prima2/lluart.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Static memory mapping for DEBUG_LL - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#include <linux/kernel.h> -#include <asm/page.h> -#include <asm/mach/map.h> -#include "common.h" - -#if defined(CONFIG_DEBUG_SIRFPRIMA2_UART1) -#define SIRFSOC_UART1_PA_BASE 0xb0060000 -#elif defined(CONFIG_DEBUG_SIRFMARCO_UART1) -#define SIRFSOC_UART1_PA_BASE 0xcc060000 -#else -#define SIRFSOC_UART1_PA_BASE 0 -#endif - -#define SIRFSOC_UART1_VA_BASE SIRFSOC_VA(0x060000) -#define SIRFSOC_UART1_SIZE SZ_4K - -void __init sirfsoc_map_lluart(void) -{ - struct map_desc sirfsoc_lluart_map = { - .virtual = SIRFSOC_UART1_VA_BASE, - .pfn = __phys_to_pfn(SIRFSOC_UART1_PA_BASE), - .length = SIRFSOC_UART1_SIZE, - .type = MT_DEVICE, - }; - - iotable_init(&sirfsoc_lluart_map, 1); -} diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c index 335c12e92262..e46c91094dde 100644 --- a/arch/arm/mach-prima2/platsmp.c +++ b/arch/arm/mach-prima2/platsmp.c @@ -20,30 +20,10 @@ #include "common.h" -static void __iomem *scu_base; -static void __iomem *rsc_base; +static void __iomem *clk_base; static DEFINE_SPINLOCK(boot_lock); -static struct map_desc scu_io_desc __initdata = { - .length = SZ_4K, - .type = MT_DEVICE, -}; - -void __init sirfsoc_map_scu(void) -{ - unsigned long base; - - /* Get SCU base */ - asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base)); - - scu_io_desc.virtual = SIRFSOC_VA(base); - scu_io_desc.pfn = __phys_to_pfn(base); - iotable_init(&scu_io_desc, 1); - - scu_base = (void __iomem *)SIRFSOC_VA(base); -} - static void sirfsoc_secondary_init(unsigned int cpu) { /* @@ -60,8 +40,8 @@ static void sirfsoc_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } -static struct of_device_id rsc_ids[] = { - { .compatible = "sirf,marco-rsc" }, +static const struct of_device_id clk_ids[] = { + { .compatible = "sirf,atlas7-clkc" }, {}, }; @@ -70,27 +50,27 @@ static int sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle) unsigned long timeout; struct device_node *np; - np = of_find_matching_node(NULL, rsc_ids); + np = of_find_matching_node(NULL, clk_ids); if (!np) return -ENODEV; - rsc_base = of_iomap(np, 0); - if (!rsc_base) + clk_base = of_iomap(np, 0); + if (!clk_base) return -ENOMEM; /* - * write the address of secondary startup into the sram register - * at offset 0x2C, then write the magic number 0x3CAF5D62 to the - * RSC register at offset 0x28, which is what boot rom code is + * write the address of secondary startup into the clkc register + * at offset 0x2bC, then write the magic number 0x3CAF5D62 to the + * clkc register at offset 0x2b8, which is what boot rom code is * waiting for. This would wake up the secondary core from WFE */ -#define SIRFSOC_CPU1_JUMPADDR_OFFSET 0x2C +#define SIRFSOC_CPU1_JUMPADDR_OFFSET 0x2bc __raw_writel(virt_to_phys(sirfsoc_secondary_startup), - rsc_base + SIRFSOC_CPU1_JUMPADDR_OFFSET); + clk_base + SIRFSOC_CPU1_JUMPADDR_OFFSET); -#define SIRFSOC_CPU1_WAKEMAGIC_OFFSET 0x28 +#define SIRFSOC_CPU1_WAKEMAGIC_OFFSET 0x2b8 __raw_writel(0x3CAF5D62, - rsc_base + SIRFSOC_CPU1_WAKEMAGIC_OFFSET); + clk_base + SIRFSOC_CPU1_WAKEMAGIC_OFFSET); /* make sure write buffer is drained */ mb(); @@ -132,13 +112,7 @@ static int sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle) return pen_release != -1 ? -ENOSYS : 0; } -static void __init sirfsoc_smp_prepare_cpus(unsigned int max_cpus) -{ - scu_enable(scu_base); -} - struct smp_operations sirfsoc_smp_ops __initdata = { - .smp_prepare_cpus = sirfsoc_smp_prepare_cpus, .smp_secondary_init = sirfsoc_secondary_init, .smp_boot_secondary = sirfsoc_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c index e1f1f86f6a95..7c251eb11d01 100644 --- a/arch/arm/mach-prima2/rstc.c +++ b/arch/arm/mach-prima2/rstc.c @@ -34,36 +34,20 @@ static int sirfsoc_reset_module(struct reset_controller_dev *rcdev, mutex_lock(&rstc_lock); - if (of_device_is_compatible(rcdev->of_node, "sirf,prima2-rstc")) { - /* - * Writing 1 to this bit resets corresponding block. - * Writing 0 to this bit de-asserts reset signal of the - * corresponding block. datasheet doesn't require explicit - * delay between the set and clear of reset bit. it could - * be shorter if tests pass. - */ - writel(readl(sirfsoc_rstc_base + + /* + * Writing 1 to this bit resets corresponding block. + * Writing 0 to this bit de-asserts reset signal of the + * corresponding block. datasheet doesn't require explicit + * delay between the set and clear of reset bit. it could + * be shorter if tests pass. + */ + writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | (1 << reset_bit), - sirfsoc_rstc_base + (reset_bit / 32) * 4); - msleep(20); - writel(readl(sirfsoc_rstc_base + + sirfsoc_rstc_base + (reset_bit / 32) * 4); + msleep(20); + writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~(1 << reset_bit), - sirfsoc_rstc_base + (reset_bit / 32) * 4); - } else { - /* - * For MARCO and POLO - * Writing 1 to SET register resets corresponding block. - * Writing 1 to CLEAR register de-asserts reset signal of the - * corresponding block. - * datasheet doesn't require explicit delay between the set and - * clear of reset bit. it could be shorter if tests pass. - */ - writel(1 << reset_bit, - sirfsoc_rstc_base + (reset_bit / 32) * 8); - msleep(20); - writel(1 << reset_bit, - sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4); - } + sirfsoc_rstc_base + (reset_bit / 32) * 4); mutex_unlock(&rstc_lock); @@ -106,7 +90,6 @@ static int sirfsoc_rstc_probe(struct platform_device *pdev) static const struct of_device_id rstc_ids[] = { { .compatible = "sirf,prima2-rstc" }, - { .compatible = "sirf,marco-rstc" }, {}, }; diff --git a/arch/arm/mach-prima2/rtciobrg.c b/arch/arm/mach-prima2/rtciobrg.c index 70a0b475062b..8f66d8f7ca75 100644 --- a/arch/arm/mach-prima2/rtciobrg.c +++ b/arch/arm/mach-prima2/rtciobrg.c @@ -104,7 +104,6 @@ EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_writel); static const struct of_device_id rtciobrg_ids[] = { { .compatible = "sirf,prima2-rtciobg" }, - { .compatible = "sirf,marco-rtciobg" }, {} }; diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 83efe914bf7d..8896e71586f5 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -6,7 +6,6 @@ comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" config MACH_PXA27X_DT bool "Support PXA27x platforms from device tree" - select CPU_PXA27x select POWER_SUPPLY select PXA27x select USE_OF @@ -84,14 +83,12 @@ config ARCH_VIPER select I2C_GPIO if I2C=y select ISA select PXA25x - select PXA_HAVE_ISA_IRQS config MACH_ARCOM_ZEUS bool "Arcom/Eurotech ZEUS SBC" select ARCOM_PCMCIA select ISA select PXA27x - select PXA_HAVE_ISA_IRQS config MACH_BALLOON3 bool "Balloon 3 board" @@ -691,9 +688,6 @@ config SHARPSL_PM_MAX1111 select SPI select SPI_MASTER -config PXA_HAVE_ISA_IRQS - bool - config PXA310_ULPI bool diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 06022b235730..89f790dda93e 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -26,6 +26,7 @@ #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> #include <linux/io.h> +#include <linux/regulator/machine.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/spi/corgi_lcd.h> @@ -752,6 +753,8 @@ static void __init corgi_init(void) sharpsl_nand_partitions[1].size = 53 * 1024 * 1024; platform_add_devices(devices, ARRAY_SIZE(devices)); + + regulator_has_full_constraints(); } static void __init fixup_corgi(struct tag *tags, char **cmdline) diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index ac7b3eabbd85..35434662dc7c 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -40,7 +40,7 @@ static struct resource pxa_resource_pmu = { }; struct platform_device pxa_device_pmu = { - .name = "arm-pmu", + .name = "xscale-pmu", .id = -1, .resource = &pxa_resource_pmu, .num_resources = 1, diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index c66ad4edc5e3..5fb41ad6e3bc 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -893,6 +893,8 @@ static void __init hx4700_init(void) mdelay(10); gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1); mdelay(10); + + regulator_has_full_constraints(); } MACHINE_START(H4700, "HP iPAQ HX4700") diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 343c4e3a7c5d..f6d02e4cbcda 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -36,6 +36,7 @@ #include <linux/platform_data/video-pxafb.h> #include <mach/bitfield.h> #include <linux/platform_data/mmc-pxamci.h> +#include <linux/smc91x.h> #include "generic.h" #include "devices.h" @@ -81,11 +82,16 @@ static struct resource smc91x_resources[] = { } }; +static struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_32BIT | SMC91X_USE_DMA | SMC91X_NOWAIT, +}; + static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, + .dev.platform_data = &smc91x_platdata, }; static void idp_backlight_power(int on) diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index 48c2fd851686..7e3ea351f3c7 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -12,14 +12,10 @@ #ifndef __ASM_MACH_IRQS_H #define __ASM_MACH_IRQS_H -#ifdef CONFIG_PXA_HAVE_ISA_IRQS -#define PXA_ISA_IRQ(x) (x) -#define PXA_ISA_IRQ_NUM (16) -#else -#define PXA_ISA_IRQ_NUM (0) -#endif +#include <asm/irq.h> -#define PXA_IRQ(x) (PXA_ISA_IRQ_NUM + (x)) +#define PXA_ISA_IRQ(x) (x) +#define PXA_IRQ(x) (NR_IRQS_LEGACY + (x)) #define IRQ_SSP3 PXA_IRQ(0) /* SSP3 service request */ #define IRQ_MSL PXA_IRQ(1) /* MSL Interface interrupt */ diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index ad777b353bd5..eaee2c20b189 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -24,6 +24,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/pwm_backlight.h> +#include <linux/smc91x.h> #include <asm/types.h> #include <asm/setup.h> @@ -189,15 +190,20 @@ static struct resource smc91x_resources[] = { [1] = { .start = LPD270_ETHERNET_IRQ, .end = LPD270_ETHERNET_IRQ, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; +struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, +}; + static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, + .dev.platform_data = &smc91x_platdata, }; static struct resource lpd270_flash_resources[] = { diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 29019beae591..195b1121c8f1 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -25,6 +25,7 @@ #include <linux/gpio.h> #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> +#include <linux/regulator/machine.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/spi/pxa2xx_spi.h> @@ -455,6 +456,7 @@ static void __init poodle_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices)); poodle_init_spi(); + regulator_has_full_constraints(); } static void __init fixup_poodle(struct tag *tags, char **cmdline) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 962a7f31f596..f4e2e2719580 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -979,6 +979,8 @@ static void __init spitz_init(void) spitz_nand_init(); spitz_i2c_init(); spitz_audio_init(); + + regulator_has_full_constraints(); } static void __init spitz_fixup(struct tag *tags, char **cmdline) diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index ee5697ba05bc..48003ea652b9 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -1,9 +1,8 @@ menuconfig ARCH_QCOM bool "Qualcomm Support" if ARCH_MULTI_V7 - select ARCH_REQUIRE_GPIOLIB + select ARCH_SUPPORTS_BIG_ENDIAN select ARM_GIC select ARM_AMBA - select CLKSRC_OF select PINCTRL select QCOM_SCM if SMP help diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c index d6908569ecaf..09cffed4c0a4 100644 --- a/arch/arm/mach-qcom/platsmp.c +++ b/arch/arm/mach-qcom/platsmp.c @@ -44,7 +44,7 @@ #define APCS_SAW2_VCTL 0x14 #define APCS_SAW2_2_VCTL 0x1c -extern void secondary_startup(void); +extern void secondary_startup_arm(void); static DEFINE_SPINLOCK(boot_lock); @@ -337,7 +337,7 @@ static void __init qcom_smp_prepare_cpus(unsigned int max_cpus) flags |= cold_boot_flags[map]; } - if (scm_set_boot_addr(virt_to_phys(secondary_startup), flags)) { + if (scm_set_boot_addr(virt_to_phys(secondary_startup_arm), flags)) { for_each_present_cpu(cpu) { if (cpu == smp_processor_id()) continue; diff --git a/arch/arm/mach-qcom/scm-boot.c b/arch/arm/mach-qcom/scm-boot.c index 45cee3e469a5..e8ff7beb6218 100644 --- a/arch/arm/mach-qcom/scm-boot.c +++ b/arch/arm/mach-qcom/scm-boot.c @@ -24,15 +24,15 @@ /* * Set the cold/warm boot address for one of the CPU cores. */ -int scm_set_boot_addr(phys_addr_t addr, int flags) +int scm_set_boot_addr(u32 addr, int flags) { struct { - unsigned int flags; - phys_addr_t addr; + __le32 flags; + __le32 addr; } cmd; - cmd.addr = addr; - cmd.flags = flags; + cmd.addr = cpu_to_le32(addr); + cmd.flags = cpu_to_le32(flags); return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR, &cmd, sizeof(cmd), NULL, 0); } diff --git a/arch/arm/mach-qcom/scm-boot.h b/arch/arm/mach-qcom/scm-boot.h index 6aabb2428176..3e210fb818bb 100644 --- a/arch/arm/mach-qcom/scm-boot.h +++ b/arch/arm/mach-qcom/scm-boot.h @@ -18,7 +18,9 @@ #define SCM_FLAG_COLDBOOT_CPU3 0x20 #define SCM_FLAG_WARMBOOT_CPU0 0x04 #define SCM_FLAG_WARMBOOT_CPU1 0x02 +#define SCM_FLAG_WARMBOOT_CPU2 0x10 +#define SCM_FLAG_WARMBOOT_CPU3 0x40 -int scm_set_boot_addr(phys_addr_t addr, int flags); +int scm_set_boot_addr(u32 addr, int flags); #endif diff --git a/arch/arm/mach-qcom/scm.c b/arch/arm/mach-qcom/scm.c index c536fd6bf827..1d9cf18c7091 100644 --- a/arch/arm/mach-qcom/scm.c +++ b/arch/arm/mach-qcom/scm.c @@ -22,13 +22,11 @@ #include <linux/errno.h> #include <linux/err.h> +#include <asm/outercache.h> #include <asm/cacheflush.h> #include "scm.h" -/* Cache line size for msm8x60 */ -#define CACHELINESIZE 32 - #define SCM_ENOMEM -5 #define SCM_EOPNOTSUPP -4 #define SCM_EINVAL_ADDR -3 @@ -63,11 +61,11 @@ static DEFINE_MUTEX(scm_lock); * to access the buffers in a safe manner. */ struct scm_command { - u32 len; - u32 buf_offset; - u32 resp_hdr_offset; - u32 id; - u32 buf[0]; + __le32 len; + __le32 buf_offset; + __le32 resp_hdr_offset; + __le32 id; + __le32 buf[0]; }; /** @@ -77,9 +75,9 @@ struct scm_command { * @is_complete: indicates if the command has finished processing */ struct scm_response { - u32 len; - u32 buf_offset; - u32 is_complete; + __le32 len; + __le32 buf_offset; + __le32 is_complete; }; /** @@ -97,12 +95,14 @@ static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size) struct scm_command *cmd; size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size + resp_size; + u32 offset; cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL); if (cmd) { - cmd->len = len; - cmd->buf_offset = offsetof(struct scm_command, buf); - cmd->resp_hdr_offset = cmd->buf_offset + cmd_size; + cmd->len = cpu_to_le32(len); + offset = offsetof(struct scm_command, buf); + cmd->buf_offset = cpu_to_le32(offset); + cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size); } return cmd; } @@ -127,7 +127,7 @@ static inline void free_scm_command(struct scm_command *cmd) static inline struct scm_response *scm_command_to_response( const struct scm_command *cmd) { - return (void *)cmd + cmd->resp_hdr_offset; + return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset); } /** @@ -149,11 +149,12 @@ static inline void *scm_get_command_buffer(const struct scm_command *cmd) */ static inline void *scm_get_response_buffer(const struct scm_response *rsp) { - return (void *)rsp + rsp->buf_offset; + return (void *)rsp + le32_to_cpu(rsp->buf_offset); } static int scm_remap_error(int err) { + pr_err("scm_call failed with error code %d\n", err); switch (err) { case SCM_ERROR: return -EIO; @@ -198,11 +199,12 @@ static int __scm_call(const struct scm_command *cmd) u32 cmd_addr = virt_to_phys(cmd); /* - * Flush the entire cache here so callers don't have to remember - * to flush the cache when passing physical addresses to the secure - * side in the buffer. + * Flush the command buffer so that the secure world sees + * the correct data. */ - flush_cache_all(); + __cpuc_flush_dcache_area((void *)cmd, cmd->len); + outer_flush_range(cmd_addr, cmd_addr + cmd->len); + ret = smc(cmd_addr); if (ret < 0) ret = scm_remap_error(ret); @@ -210,6 +212,25 @@ static int __scm_call(const struct scm_command *cmd) return ret; } +static void scm_inv_range(unsigned long start, unsigned long end) +{ + u32 cacheline_size, ctr; + + asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr)); + cacheline_size = 4 << ((ctr >> 16) & 0xf); + + start = round_down(start, cacheline_size); + end = round_up(end, cacheline_size); + outer_inv_range(start, end); + while (start < end) { + asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start) + : "memory"); + start += cacheline_size; + } + dsb(); + isb(); +} + /** * scm_call() - Send an SCM command * @svc_id: service identifier @@ -220,6 +241,13 @@ static int __scm_call(const struct scm_command *cmd) * @resp_len: length of the response buffer * * Sends a command to the SCM and waits for the command to finish processing. + * + * A note on cache maintenance: + * Note that any buffers that are expected to be accessed by the secure world + * must be flushed before invoking scm_call and invalidated in the cache + * immediately after scm_call returns. Cache maintenance on the command and + * response buffers is taken care of by scm_call; however, callers are + * responsible for any other cached buffers passed over to the secure world. */ int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len, void *resp_buf, size_t resp_len) @@ -227,12 +255,13 @@ int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len, int ret; struct scm_command *cmd; struct scm_response *rsp; + unsigned long start, end; cmd = alloc_scm_command(cmd_len, resp_len); if (!cmd) return -ENOMEM; - cmd->id = (svc_id << 10) | cmd_id; + cmd->id = cpu_to_le32((svc_id << 10) | cmd_id); if (cmd_buf) memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len); @@ -243,17 +272,15 @@ int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len, goto out; rsp = scm_command_to_response(cmd); + start = (unsigned long)rsp; + do { - u32 start = (u32)rsp; - u32 end = (u32)scm_get_response_buffer(rsp) + resp_len; - start &= ~(CACHELINESIZE - 1); - while (start < end) { - asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start) - : "memory"); - start += CACHELINESIZE; - } + scm_inv_range(start, start + sizeof(*rsp)); } while (!rsp->is_complete); + end = (unsigned long)scm_get_response_buffer(rsp) + resp_len; + scm_inv_range(start, end); + if (resp_buf) memcpy(resp_buf, scm_get_response_buffer(rsp), resp_len); out: diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 850e506926df..c309593abdb2 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -28,6 +28,7 @@ #include <linux/platform_data/video-clcd-versatile.h> #include <linux/io.h> #include <linux/smsc911x.h> +#include <linux/smc91x.h> #include <linux/ata_platform.h> #include <linux/amba/mmci.h> #include <linux/gfp.h> @@ -94,6 +95,10 @@ static struct smsc911x_platform_config smsc911x_config = { .phy_interface = PHY_INTERFACE_MODE_MII, }; +static struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT, +}; + static struct platform_device realview_eth_device = { .name = "smsc911x", .id = 0, @@ -107,6 +112,8 @@ int realview_eth_register(const char *name, struct resource *res) realview_eth_device.resource = res; if (strcmp(realview_eth_device.name, "smsc911x") == 0) realview_eth_device.dev.platform_data = &smsc911x_config; + else + realview_eth_device.dev.platform_data = &smc91x_platdata; return platform_device_register(&realview_eth_device); } diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 739d4f113097..b3869cbbcc68 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -37,6 +37,7 @@ #include <asm/pgtable.h> #include <asm/hardware/cache-l2x0.h> #include <asm/smp_twd.h> +#include <asm/system_info.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -233,7 +234,7 @@ static struct resource realview_eb_eth_resources[] = { [1] = { .start = IRQ_EB_ETH, .end = IRQ_EB_ETH, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; @@ -296,7 +297,6 @@ static struct resource pmu_resources[] = { }; static struct platform_device pmu_device = { - .name = "arm-pmu", .id = -1, .num_resources = ARRAY_SIZE(pmu_resources), .resource = pmu_resources, @@ -451,6 +451,7 @@ static void __init realview_eb_init(void) */ l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff); #endif + pmu_device.name = core_tile_a9mp() ? "armv7-pmu" : "armv6-pmu"; platform_device_register(&pmu_device); } diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index b0e0dcaed944..ce92c1823494 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -280,7 +280,7 @@ static struct resource pmu_resource = { }; static struct platform_device pmu_device = { - .name = "arm-pmu", + .name = "armv6-pmu", .id = -1, .num_resources = 1, .resource = &pmu_resource, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 47bf55fdbf27..15c45e25095f 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -262,7 +262,7 @@ static struct resource pmu_resources[] = { }; static struct platform_device pmu_device = { - .name = "arm-pmu", + .name = "armv6-pmu", .id = -1, .num_resources = ARRAY_SIZE(pmu_resources), .resource = pmu_resources, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 4e57a8599265..4c64662f5437 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -240,7 +240,7 @@ static struct resource pmu_resource = { }; static struct platform_device pmu_device = { - .name = "arm-pmu", + .name = "armv7-pmu", .id = -1, .num_resources = 1, .resource = &pmu_resource, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index d89eb4023467..9a22b864219f 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -280,7 +280,7 @@ static struct resource pmu_resources[] = { }; static struct platform_device pmu_device = { - .name = "arm-pmu", + .name = "armv7-pmu", .id = -1, .num_resources = ARRAY_SIZE(pmu_resources), .resource = pmu_resources, diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index ac5803cac98d..ae4eb7cc4bcc 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -11,6 +11,8 @@ config ARCH_ROCKCHIP select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select DW_APB_TIMER_OF + select REGULATOR if PM + select ROCKCHIP_TIMER select ARM_GLOBAL_TIMER select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK help diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile index b29d8ead4cf2..5c3a9b2de920 100644 --- a/arch/arm/mach-rockchip/Makefile +++ b/arch/arm/mach-rockchip/Makefile @@ -1,4 +1,5 @@ CFLAGS_platsmp.o := -march=armv7-a obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip.o +obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c new file mode 100644 index 000000000000..50cb781aaa36 --- /dev/null +++ b/arch/arm/mach-rockchip/pm.c @@ -0,0 +1,260 @@ +/* + * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd + * Author: Tony Xie <tony.xie@rock-chips.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/regmap.h> +#include <linux/suspend.h> +#include <linux/mfd/syscon.h> +#include <linux/regulator/machine.h> + +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> +#include <asm/suspend.h> + +#include "pm.h" + +/* These enum are option of low power mode */ +enum { + ROCKCHIP_ARM_OFF_LOGIC_NORMAL = 0, + ROCKCHIP_ARM_OFF_LOGIC_DEEP = 1, +}; + +struct rockchip_pm_data { + const struct platform_suspend_ops *ops; + int (*init)(struct device_node *np); +}; + +static void __iomem *rk3288_bootram_base; +static phys_addr_t rk3288_bootram_phy; + +static struct regmap *pmu_regmap; +static struct regmap *sgrf_regmap; + +static u32 rk3288_pmu_pwr_mode_con; +static u32 rk3288_sgrf_soc_con0; + +static inline u32 rk3288_l2_config(void) +{ + u32 l2ctlr; + + asm("mrc p15, 1, %0, c9, c0, 2" : "=r" (l2ctlr)); + return l2ctlr; +} + +static void rk3288_config_bootdata(void) +{ + rkpm_bootdata_cpusp = rk3288_bootram_phy + (SZ_4K - 8); + rkpm_bootdata_cpu_code = virt_to_phys(cpu_resume); + + rkpm_bootdata_l2ctlr_f = 1; + rkpm_bootdata_l2ctlr = rk3288_l2_config(); +} + +static void rk3288_slp_mode_set(int level) +{ + u32 mode_set, mode_set1; + + regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0, &rk3288_sgrf_soc_con0); + + regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON, + &rk3288_pmu_pwr_mode_con); + + /* set bit 8 so that system will resume to FAST_BOOT_ADDR */ + regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0, + SGRF_FAST_BOOT_EN | SGRF_FAST_BOOT_EN_WRITE); + + /* booting address of resuming system is from this register value */ + regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR, + rk3288_bootram_phy); + + regmap_write(pmu_regmap, RK3288_PMU_WAKEUP_CFG1, + PMU_ARMINT_WAKEUP_EN); + + mode_set = BIT(PMU_GLOBAL_INT_DISABLE) | BIT(PMU_L2FLUSH_EN) | + BIT(PMU_SREF0_ENTER_EN) | BIT(PMU_SREF1_ENTER_EN) | + BIT(PMU_DDR0_GATING_EN) | BIT(PMU_DDR1_GATING_EN) | + BIT(PMU_PWR_MODE_EN) | BIT(PMU_CHIP_PD_EN) | + BIT(PMU_SCU_EN); + + mode_set1 = BIT(PMU_CLR_CORE) | BIT(PMU_CLR_CPUP); + + if (level == ROCKCHIP_ARM_OFF_LOGIC_DEEP) { + /* arm off, logic deep sleep */ + mode_set |= BIT(PMU_BUS_PD_EN) | + BIT(PMU_DDR1IO_RET_EN) | BIT(PMU_DDR0IO_RET_EN) | + BIT(PMU_OSC_24M_DIS) | BIT(PMU_PMU_USE_LF) | + BIT(PMU_ALIVE_USE_LF) | BIT(PMU_PLL_PD_EN); + + mode_set1 |= BIT(PMU_CLR_ALIVE) | BIT(PMU_CLR_BUS) | + BIT(PMU_CLR_PERI) | BIT(PMU_CLR_DMA); + } else { + /* + * arm off, logic normal + * if pmu_clk_core_src_gate_en is not set, + * wakeup will be error + */ + mode_set |= BIT(PMU_CLK_CORE_SRC_GATE_EN); + } + + regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON, mode_set); + regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON1, mode_set1); +} + +static void rk3288_slp_mode_set_resume(void) +{ + regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON, + rk3288_pmu_pwr_mode_con); + + regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0, + rk3288_sgrf_soc_con0 | SGRF_FAST_BOOT_EN_WRITE); +} + +static int rockchip_lpmode_enter(unsigned long arg) +{ + flush_cache_all(); + + cpu_do_idle(); + + pr_err("%s: Failed to suspend\n", __func__); + + return 1; +} + +static int rk3288_suspend_enter(suspend_state_t state) +{ + local_fiq_disable(); + + rk3288_slp_mode_set(ROCKCHIP_ARM_OFF_LOGIC_NORMAL); + + cpu_suspend(0, rockchip_lpmode_enter); + + rk3288_slp_mode_set_resume(); + + local_fiq_enable(); + + return 0; +} + +static int rk3288_suspend_prepare(void) +{ + return regulator_suspend_prepare(PM_SUSPEND_MEM); +} + +static void rk3288_suspend_finish(void) +{ + if (regulator_suspend_finish()) + pr_err("%s: Suspend finish failed\n", __func__); +} + +static int rk3288_suspend_init(struct device_node *np) +{ + struct device_node *sram_np; + struct resource res; + int ret; + + pmu_regmap = syscon_node_to_regmap(np); + if (IS_ERR(pmu_regmap)) { + pr_err("%s: could not find pmu regmap\n", __func__); + return PTR_ERR(pmu_regmap); + } + + sgrf_regmap = syscon_regmap_lookup_by_compatible( + "rockchip,rk3288-sgrf"); + if (IS_ERR(sgrf_regmap)) { + pr_err("%s: could not find sgrf regmap\n", __func__); + return PTR_ERR(pmu_regmap); + } + + sram_np = of_find_compatible_node(NULL, NULL, + "rockchip,rk3288-pmu-sram"); + if (!sram_np) { + pr_err("%s: could not find bootram dt node\n", __func__); + return -ENODEV; + } + + rk3288_bootram_base = of_iomap(sram_np, 0); + if (!rk3288_bootram_base) { + pr_err("%s: could not map bootram base\n", __func__); + return -ENOMEM; + } + + ret = of_address_to_resource(sram_np, 0, &res); + if (ret) { + pr_err("%s: could not get bootram phy addr\n", __func__); + return ret; + } + rk3288_bootram_phy = res.start; + + of_node_put(sram_np); + + rk3288_config_bootdata(); + + /* copy resume code and data to bootsram */ + memcpy(rk3288_bootram_base, rockchip_slp_cpu_resume, + rk3288_bootram_sz); + + return 0; +} + +static const struct platform_suspend_ops rk3288_suspend_ops = { + .enter = rk3288_suspend_enter, + .valid = suspend_valid_only_mem, + .prepare = rk3288_suspend_prepare, + .finish = rk3288_suspend_finish, +}; + +static const struct rockchip_pm_data rk3288_pm_data __initconst = { + .ops = &rk3288_suspend_ops, + .init = rk3288_suspend_init, +}; + +static const struct of_device_id rockchip_pmu_of_device_ids[] __initconst = { + { + .compatible = "rockchip,rk3288-pmu", + .data = &rk3288_pm_data, + }, + { /* sentinel */ }, +}; + +void __init rockchip_suspend_init(void) +{ + const struct rockchip_pm_data *pm_data; + const struct of_device_id *match; + struct device_node *np; + int ret; + + np = of_find_matching_node_and_match(NULL, rockchip_pmu_of_device_ids, + &match); + if (!match) { + pr_err("Failed to find PMU node\n"); + return; + } + pm_data = (struct rockchip_pm_data *) match->data; + + if (pm_data->init) { + ret = pm_data->init(np); + + if (ret) { + pr_err("%s: matches init error %d\n", __func__, ret); + return; + } + } + + suspend_set_ops(pm_data->ops); +} diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h new file mode 100644 index 000000000000..7c889c04604b --- /dev/null +++ b/arch/arm/mach-rockchip/pm.h @@ -0,0 +1,105 @@ +/* + * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd + * Author: Tony Xie <tony.xie@rock-chips.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef __MACH_ROCKCHIP_PM_H +#define __MACH_ROCKCHIP_PM_H + +extern unsigned long rkpm_bootdata_cpusp; +extern unsigned long rkpm_bootdata_cpu_code; +extern unsigned long rkpm_bootdata_l2ctlr_f; +extern unsigned long rkpm_bootdata_l2ctlr; +extern unsigned long rkpm_bootdata_ddr_code; +extern unsigned long rkpm_bootdata_ddr_data; +extern unsigned long rk3288_bootram_sz; + +void rockchip_slp_cpu_resume(void); +#ifdef CONFIG_PM_SLEEP +void __init rockchip_suspend_init(void); +#else +static inline void rockchip_suspend_init(void) +{ +} +#endif + +/****** following is rk3288 defined **********/ +#define RK3288_PMU_WAKEUP_CFG0 0x00 +#define RK3288_PMU_WAKEUP_CFG1 0x04 +#define RK3288_PMU_PWRMODE_CON 0x18 +#define RK3288_PMU_OSC_CNT 0x20 +#define RK3288_PMU_PLL_CNT 0x24 +#define RK3288_PMU_STABL_CNT 0x28 +#define RK3288_PMU_DDR0IO_PWRON_CNT 0x2c +#define RK3288_PMU_DDR1IO_PWRON_CNT 0x30 +#define RK3288_PMU_CORE_PWRDWN_CNT 0x34 +#define RK3288_PMU_CORE_PWRUP_CNT 0x38 +#define RK3288_PMU_GPU_PWRDWN_CNT 0x3c +#define RK3288_PMU_GPU_PWRUP_CNT 0x40 +#define RK3288_PMU_WAKEUP_RST_CLR_CNT 0x44 +#define RK3288_PMU_PWRMODE_CON1 0x90 + +#define RK3288_SGRF_SOC_CON0 (0x0000) +#define RK3288_SGRF_FAST_BOOT_ADDR (0x0120) +#define SGRF_FAST_BOOT_EN BIT(8) +#define SGRF_FAST_BOOT_EN_WRITE BIT(24) + +#define RK3288_CRU_MODE_CON 0x50 +#define RK3288_CRU_SEL0_CON 0x60 +#define RK3288_CRU_SEL1_CON 0x64 +#define RK3288_CRU_SEL10_CON 0x88 +#define RK3288_CRU_SEL33_CON 0xe4 +#define RK3288_CRU_SEL37_CON 0xf4 + +/* PMU_WAKEUP_CFG1 bits */ +#define PMU_ARMINT_WAKEUP_EN BIT(0) + +enum rk3288_pwr_mode_con { + PMU_PWR_MODE_EN = 0, + PMU_CLK_CORE_SRC_GATE_EN, + PMU_GLOBAL_INT_DISABLE, + PMU_L2FLUSH_EN, + PMU_BUS_PD_EN, + PMU_A12_0_PD_EN, + PMU_SCU_EN, + PMU_PLL_PD_EN, + PMU_CHIP_PD_EN, /* POWER OFF PIN ENABLE */ + PMU_PWROFF_COMB, + PMU_ALIVE_USE_LF, + PMU_PMU_USE_LF, + PMU_OSC_24M_DIS, + PMU_INPUT_CLAMP_EN, + PMU_WAKEUP_RESET_EN, + PMU_SREF0_ENTER_EN, + PMU_SREF1_ENTER_EN, + PMU_DDR0IO_RET_EN, + PMU_DDR1IO_RET_EN, + PMU_DDR0_GATING_EN, + PMU_DDR1_GATING_EN, + PMU_DDR0IO_RET_DE_REQ, + PMU_DDR1IO_RET_DE_REQ +}; + +enum rk3288_pwr_mode_con1 { + PMU_CLR_BUS = 0, + PMU_CLR_CORE, + PMU_CLR_CPUP, + PMU_CLR_ALIVE, + PMU_CLR_DMA, + PMU_CLR_PERI, + PMU_CLR_GPU, + PMU_CLR_VIDEO, + PMU_CLR_HEVC, + PMU_CLR_VIO, +}; + +#endif /* __MACH_ROCKCHIP_PM_H */ diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index a611f4852582..d360ec044b66 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -27,6 +27,7 @@ #include <asm/mach/map.h> #include <asm/hardware/cache-l2x0.h> #include "core.h" +#include "pm.h" #define RK3288_GRF_SOC_CON0 0x244 @@ -52,6 +53,7 @@ static void __init rockchip_timer_init(void) static void __init rockchip_dt_init(void) { + rockchip_suspend_init(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); platform_device_register_simple("cpufreq-dt", 0, NULL, 0); } @@ -65,7 +67,7 @@ static const char * const rockchip_board_dt_compat[] = { NULL, }; -DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)") +DT_MACHINE_START(ROCKCHIP_DT, "Rockchip (Device Tree)") .l2c_aux_val = 0, .l2c_aux_mask = ~0, .init_time = rockchip_timer_init, diff --git a/arch/arm/mach-rockchip/sleep.S b/arch/arm/mach-rockchip/sleep.S new file mode 100644 index 000000000000..2eec9a341f05 --- /dev/null +++ b/arch/arm/mach-rockchip/sleep.S @@ -0,0 +1,73 @@ +/* + * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd + * Author: Tony Xie <tony.xie@rock-chips.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/memory.h> + +.data +/* + * this code will be copied from + * ddr to sram for system resumeing. + * so it is ".data section". + */ +.align + +ENTRY(rockchip_slp_cpu_resume) + setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set svc, irqs off + mrc p15, 0, r1, c0, c0, 5 + and r1, r1, #0xf + cmp r1, #0 + /* olny cpu0 can continue to run, the others is halt here */ + beq cpu0run +secondary_loop: + wfe + b secondary_loop +cpu0run: + ldr r3, rkpm_bootdata_l2ctlr_f + cmp r3, #0 + beq sp_set + ldr r3, rkpm_bootdata_l2ctlr + mcr p15, 1, r3, c9, c0, 2 +sp_set: + ldr sp, rkpm_bootdata_cpusp + ldr r1, rkpm_bootdata_cpu_code + bx r1 +ENDPROC(rockchip_slp_cpu_resume) + +/* Parameters filled in by the kernel */ + +/* Flag for whether to restore L2CTLR on resume */ + .global rkpm_bootdata_l2ctlr_f +rkpm_bootdata_l2ctlr_f: + .long 0 + +/* Saved L2CTLR to restore on resume */ + .global rkpm_bootdata_l2ctlr +rkpm_bootdata_l2ctlr: + .long 0 + +/* CPU resume SP addr */ + .globl rkpm_bootdata_cpusp +rkpm_bootdata_cpusp: + .long 0 + +/* CPU resume function (physical address) */ + .globl rkpm_bootdata_cpu_code +rkpm_bootdata_cpu_code: + .long 0 + +ENTRY(rk3288_bootram_sz) + .word . - rockchip_slp_cpu_resume diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 9eb22297cbe1..79c49ff77f6e 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -29,7 +29,6 @@ config CPU_S3C2410 default y select CPU_ARM920T select S3C2410_COMMON_CLK - select S3C2410_DMA if S3C24XX_DMA select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ select S3C2410_PM if PM help @@ -40,7 +39,6 @@ config CPU_S3C2412 bool "SAMSUNG S3C2412" select CPU_ARM926T select S3C2412_COMMON_CLK - select S3C2412_DMA if S3C24XX_DMA select S3C2412_PM if PM help Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line @@ -50,7 +48,6 @@ config CPU_S3C2416 select CPU_ARM926T select S3C2416_PM if PM select S3C2443_COMMON_CLK - select S3C2443_DMA if S3C24XX_DMA help Support for the S3C2416 SoC from the S3C24XX line @@ -59,7 +56,6 @@ config CPU_S3C2440 select CPU_ARM920T select S3C2410_COMMON_CLK select S3C2410_PM if PM - select S3C2440_DMA if S3C24XX_DMA help Support for S3C2440 Samsung Mobile CPU based systems. @@ -67,7 +63,6 @@ config CPU_S3C2442 bool "SAMSUNG S3C2442" select CPU_ARM920T select S3C2410_COMMON_CLK - select S3C2410_DMA if S3C24XX_DMA select S3C2410_PM if PM help Support for S3C2442 Samsung Mobile CPU based systems. @@ -80,7 +75,6 @@ config CPU_S3C2443 bool "SAMSUNG S3C2443" select CPU_ARM920T select S3C2443_COMMON_CLK - select S3C2443_DMA if S3C24XX_DMA help Support for the S3C2443 SoC from the S3C24XX line @@ -114,27 +108,6 @@ config S3C24XX_SETUP_TS help Compile in platform device definition for Samsung TouchScreen. -config S3C24XX_DMA - bool "S3C2410 DMA support (deprecated)" - select S3C_DMA - help - S3C2410 DMA support. This is needed for drivers like sound which - use the S3C2410's DMA system to move data to and from the - peripheral blocks. - -config S3C2410_DMA_DEBUG - bool "S3C2410 DMA support debug" - depends on S3C2410_DMA - help - Enable debugging output for the DMA code. This option sends info - to the kernel log, at priority KERN_DEBUG. - -config S3C2410_DMA - bool - depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442) - help - DMA device selection for S3C2410 and compatible CPUs - config S3C2410_PM bool help @@ -325,11 +298,6 @@ config CPU_S3C2412_ONLY !CPU_S3C2442 && !CPU_S3C2443 default y -config S3C2412_DMA - bool - help - Internal config node for S3C2412 DMA support - config S3C2412_PM bool select S3C2412_PM_SLEEP @@ -438,11 +406,6 @@ endif # CPU_S3C2416 if CPU_S3C2440 -config S3C2440_DMA - bool - help - Support for S3C2440 specific DMA code5A - config S3C2440_XTAL_12000000 bool help @@ -601,11 +564,6 @@ endif # CPU_S3C2442 if CPU_S3C2443 || CPU_S3C2416 -config S3C2443_DMA - bool - help - Internal config node for S3C2443 DMA support - config S3C2443_SETUP_SPI bool help diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index b92071638733..b40a22fe082a 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -12,12 +12,10 @@ obj-y += common.o obj-$(CONFIG_CPU_S3C2410) += s3c2410.o -obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o obj-$(CONFIG_CPU_S3C2412) += s3c2412.o -obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o @@ -27,7 +25,6 @@ obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o obj-$(CONFIG_CPU_S3C2440) += s3c2440.o obj-$(CONFIG_CPU_S3C2442) += s3c2442.o obj-$(CONFIG_CPU_S3C244X) += s3c244x.o -obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o @@ -39,15 +36,11 @@ obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o # common code -obj-$(CONFIG_S3C24XX_DMA) += dma.o - obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o -obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o - # # machine support # following is ordered alphabetically by option text. diff --git a/arch/arm/mach-s3c24xx/dma-s3c2410.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c deleted file mode 100644 index 09aa12da1789..000000000000 --- a/arch/arm/mach-s3c24xx/dma-s3c2410.c +++ /dev/null @@ -1,182 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/dma.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 DMA selection - * - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> - -#include <mach/map.h> -#include <mach/dma.h> - -#include <plat/cpu.h> -#include <plat/dma-s3c24xx.h> - -#include <mach/regs-gpio.h> -#include <plat/regs-dma.h> -#include <mach/regs-lcd.h> -#include <plat/regs-spi.h> - -static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { - [DMACH_XD0] = { - .name = "xdreq0", - .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID, - }, - [DMACH_XD1] = { - .name = "xdreq1", - .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID, - }, - [DMACH_SDI] = { - .name = "sdi", - .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, - .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, - }, - [DMACH_SPI0] = { - .name = "spi0", - .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, - }, - [DMACH_SPI1] = { - .name = "spi1", - .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, - }, - [DMACH_UART0] = { - .name = "uart0", - .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, - }, - [DMACH_UART1] = { - .name = "uart1", - .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, - }, - [DMACH_UART2] = { - .name = "uart2", - .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, - }, - [DMACH_TIMER] = { - .name = "timer", - .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID, - .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID, - }, - [DMACH_I2S_IN] = { - .name = "i2s-sdi", - .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, - }, - [DMACH_I2S_OUT] = { - .name = "i2s-sdo", - .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, - }, - [DMACH_USB_EP1] = { - .name = "usb-ep1", - .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID, - }, - [DMACH_USB_EP2] = { - .name = "usb-ep2", - .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID, - }, - [DMACH_USB_EP3] = { - .name = "usb-ep3", - .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID, - }, - [DMACH_USB_EP4] = { - .name = "usb-ep4", - .channels[3] =S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID, - }, -}; - -static void s3c2410_dma_select(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map) -{ - chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID; -} - -static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = { - .select = s3c2410_dma_select, - .dcon_mask = 7 << 24, - .map = s3c2410_dma_mappings, - .map_size = ARRAY_SIZE(s3c2410_dma_mappings), -}; - -static struct s3c24xx_dma_order __initdata s3c2410_dma_order = { - .channels = { - [DMACH_SDI] = { - .list = { - [0] = 3 | DMA_CH_VALID, - [1] = 2 | DMA_CH_VALID, - [2] = 0 | DMA_CH_VALID, - }, - }, - [DMACH_I2S_IN] = { - .list = { - [0] = 1 | DMA_CH_VALID, - [1] = 2 | DMA_CH_VALID, - }, - }, - }, -}; - -static int __init s3c2410_dma_add(struct device *dev, - struct subsys_interface *sif) -{ - s3c2410_dma_init(); - s3c24xx_dma_order_set(&s3c2410_dma_order); - return s3c24xx_dma_init_map(&s3c2410_dma_sel); -} - -#if defined(CONFIG_CPU_S3C2410) -static struct subsys_interface s3c2410_dma_interface = { - .name = "s3c2410_dma", - .subsys = &s3c2410_subsys, - .add_dev = s3c2410_dma_add, -}; - -static int __init s3c2410_dma_drvinit(void) -{ - return subsys_interface_register(&s3c2410_dma_interface); -} - -arch_initcall(s3c2410_dma_drvinit); - -static struct subsys_interface s3c2410a_dma_interface = { - .name = "s3c2410a_dma", - .subsys = &s3c2410a_subsys, - .add_dev = s3c2410_dma_add, -}; - -static int __init s3c2410a_dma_drvinit(void) -{ - return subsys_interface_register(&s3c2410a_dma_interface); -} - -arch_initcall(s3c2410a_dma_drvinit); -#endif - -#if defined(CONFIG_CPU_S3C2442) -/* S3C2442 DMA contains the same selection table as the S3C2410 */ -static struct subsys_interface s3c2442_dma_interface = { - .name = "s3c2442_dma", - .subsys = &s3c2442_subsys, - .add_dev = s3c2410_dma_add, -}; - -static int __init s3c2442_dma_drvinit(void) -{ - return subsys_interface_register(&s3c2442_dma_interface); -} - -arch_initcall(s3c2442_dma_drvinit); -#endif - diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c deleted file mode 100644 index 0c0106d1a4d1..000000000000 --- a/arch/arm/mach-s3c24xx/dma-s3c2412.c +++ /dev/null @@ -1,150 +0,0 @@ -/* linux/arch/arm/mach-s3c2412/dma.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2412 DMA selection - * - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/io.h> - -#include <mach/dma.h> - -#include <plat/dma-s3c24xx.h> -#include <plat/cpu.h> - -#include <mach/regs-gpio.h> -#include <plat/regs-dma.h> -#include <mach/regs-lcd.h> -#include <plat/regs-spi.h> - -#define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID } - -static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = { - [DMACH_XD0] = { - .name = "xdreq0", - .channels = MAP(S3C2412_DMAREQSEL_XDREQ0), - }, - [DMACH_XD1] = { - .name = "xdreq1", - .channels = MAP(S3C2412_DMAREQSEL_XDREQ1), - }, - [DMACH_SDI] = { - .name = "sdi", - .channels = MAP(S3C2412_DMAREQSEL_SDI), - }, - [DMACH_SPI0_RX] = { - .name = "spi0-rx", - .channels = MAP(S3C2412_DMAREQSEL_SPI0RX), - }, - [DMACH_SPI0_TX] = { - .name = "spi0-tx", - .channels = MAP(S3C2412_DMAREQSEL_SPI0TX), - }, - [DMACH_SPI1_RX] = { - .name = "spi1-rx", - .channels = MAP(S3C2412_DMAREQSEL_SPI1RX), - }, - [DMACH_SPI1_TX] = { - .name = "spi1-tx", - .channels = MAP(S3C2412_DMAREQSEL_SPI1TX), - }, - [DMACH_UART0] = { - .name = "uart0", - .channels = MAP(S3C2412_DMAREQSEL_UART0_0), - }, - [DMACH_UART1] = { - .name = "uart1", - .channels = MAP(S3C2412_DMAREQSEL_UART1_0), - }, - [DMACH_UART2] = { - .name = "uart2", - .channels = MAP(S3C2412_DMAREQSEL_UART2_0), - }, - [DMACH_UART0_SRC2] = { - .name = "uart0", - .channels = MAP(S3C2412_DMAREQSEL_UART0_1), - }, - [DMACH_UART1_SRC2] = { - .name = "uart1", - .channels = MAP(S3C2412_DMAREQSEL_UART1_1), - }, - [DMACH_UART2_SRC2] = { - .name = "uart2", - .channels = MAP(S3C2412_DMAREQSEL_UART2_1), - }, - [DMACH_TIMER] = { - .name = "timer", - .channels = MAP(S3C2412_DMAREQSEL_TIMER), - }, - [DMACH_I2S_IN] = { - .name = "i2s-sdi", - .channels = MAP(S3C2412_DMAREQSEL_I2SRX), - }, - [DMACH_I2S_OUT] = { - .name = "i2s-sdo", - .channels = MAP(S3C2412_DMAREQSEL_I2STX), - }, - [DMACH_USB_EP1] = { - .name = "usb-ep1", - .channels = MAP(S3C2412_DMAREQSEL_USBEP1), - }, - [DMACH_USB_EP2] = { - .name = "usb-ep2", - .channels = MAP(S3C2412_DMAREQSEL_USBEP2), - }, - [DMACH_USB_EP3] = { - .name = "usb-ep3", - .channels = MAP(S3C2412_DMAREQSEL_USBEP3), - }, - [DMACH_USB_EP4] = { - .name = "usb-ep4", - .channels = MAP(S3C2412_DMAREQSEL_USBEP4), - }, -}; - -static void s3c2412_dma_select(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map) -{ - unsigned long chsel = map->channels[0] & (~DMA_CH_VALID); - writel(chsel | S3C2412_DMAREQSEL_HW, - chan->regs + S3C2412_DMA_DMAREQSEL); -} - -static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = { - .select = s3c2412_dma_select, - .dcon_mask = 0, - .map = s3c2412_dma_mappings, - .map_size = ARRAY_SIZE(s3c2412_dma_mappings), -}; - -static int __init s3c2412_dma_add(struct device *dev, - struct subsys_interface *sif) -{ - s3c2410_dma_init(); - return s3c24xx_dma_init_map(&s3c2412_dma_sel); -} - -static struct subsys_interface s3c2412_dma_interface = { - .name = "s3c2412_dma", - .subsys = &s3c2412_subsys, - .add_dev = s3c2412_dma_add, -}; - -static int __init s3c2412_dma_init(void) -{ - return subsys_interface_register(&s3c2412_dma_interface); -} - -arch_initcall(s3c2412_dma_init); diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c deleted file mode 100644 index 2f8e8a3017df..000000000000 --- a/arch/arm/mach-s3c24xx/dma-s3c2440.c +++ /dev/null @@ -1,193 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/dma.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2440 DMA selection - * - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> - -#include <mach/map.h> -#include <mach/dma.h> - -#include <plat/dma-s3c24xx.h> -#include <plat/cpu.h> - -#include <mach/regs-gpio.h> -#include <plat/regs-dma.h> -#include <mach/regs-lcd.h> -#include <plat/regs-spi.h> - -static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { - [DMACH_XD0] = { - .name = "xdreq0", - .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID, - }, - [DMACH_XD1] = { - .name = "xdreq1", - .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID, - }, - [DMACH_SDI] = { - .name = "sdi", - .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, - .channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, - .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, - }, - [DMACH_SPI0] = { - .name = "spi0", - .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, - }, - [DMACH_SPI1] = { - .name = "spi1", - .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, - }, - [DMACH_UART0] = { - .name = "uart0", - .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, - }, - [DMACH_UART1] = { - .name = "uart1", - .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, - }, - [DMACH_UART2] = { - .name = "uart2", - .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, - }, - [DMACH_TIMER] = { - .name = "timer", - .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID, - .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID, - }, - [DMACH_I2S_IN] = { - .name = "i2s-sdi", - .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, - }, - [DMACH_I2S_OUT] = { - .name = "i2s-sdo", - .channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, - }, - [DMACH_PCM_IN] = { - .name = "pcm-in", - .channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID, - .channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID, - }, - [DMACH_PCM_OUT] = { - .name = "pcm-out", - .channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID, - .channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID, - }, - [DMACH_MIC_IN] = { - .name = "mic-in", - .channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID, - .channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID, - }, - [DMACH_USB_EP1] = { - .name = "usb-ep1", - .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID, - }, - [DMACH_USB_EP2] = { - .name = "usb-ep2", - .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID, - }, - [DMACH_USB_EP3] = { - .name = "usb-ep3", - .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID, - }, - [DMACH_USB_EP4] = { - .name = "usb-ep4", - .channels[3] = S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID, - }, -}; - -static void s3c2440_dma_select(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map) -{ - chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID; -} - -static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = { - .select = s3c2440_dma_select, - .dcon_mask = 7 << 24, - .map = s3c2440_dma_mappings, - .map_size = ARRAY_SIZE(s3c2440_dma_mappings), -}; - -static struct s3c24xx_dma_order __initdata s3c2440_dma_order = { - .channels = { - [DMACH_SDI] = { - .list = { - [0] = 3 | DMA_CH_VALID, - [1] = 2 | DMA_CH_VALID, - [2] = 1 | DMA_CH_VALID, - [3] = 0 | DMA_CH_VALID, - }, - }, - [DMACH_I2S_IN] = { - .list = { - [0] = 1 | DMA_CH_VALID, - [1] = 2 | DMA_CH_VALID, - }, - }, - [DMACH_I2S_OUT] = { - .list = { - [0] = 2 | DMA_CH_VALID, - [1] = 1 | DMA_CH_VALID, - }, - }, - [DMACH_PCM_IN] = { - .list = { - [0] = 2 | DMA_CH_VALID, - [1] = 1 | DMA_CH_VALID, - }, - }, - [DMACH_PCM_OUT] = { - .list = { - [0] = 1 | DMA_CH_VALID, - [1] = 3 | DMA_CH_VALID, - }, - }, - [DMACH_MIC_IN] = { - .list = { - [0] = 3 | DMA_CH_VALID, - [1] = 2 | DMA_CH_VALID, - }, - }, - }, -}; - -static int __init s3c2440_dma_add(struct device *dev, - struct subsys_interface *sif) -{ - s3c2410_dma_init(); - s3c24xx_dma_order_set(&s3c2440_dma_order); - return s3c24xx_dma_init_map(&s3c2440_dma_sel); -} - -static struct subsys_interface s3c2440_dma_interface = { - .name = "s3c2440_dma", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_dma_add, -}; - -static int __init s3c2440_dma_init(void) -{ - return subsys_interface_register(&s3c2440_dma_interface); -} - -arch_initcall(s3c2440_dma_init); - diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c deleted file mode 100644 index f4096ec0700a..000000000000 --- a/arch/arm/mach-s3c24xx/dma-s3c2443.c +++ /dev/null @@ -1,179 +0,0 @@ -/* linux/arch/arm/mach-s3c2443/dma.c - * - * Copyright (c) 2007 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2443 DMA selection - * - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/io.h> - -#include <mach/dma.h> - -#include <plat/dma-s3c24xx.h> -#include <plat/cpu.h> - -#include <mach/regs-gpio.h> -#include <plat/regs-dma.h> -#include <mach/regs-lcd.h> -#include <plat/regs-spi.h> - -#define MAP(x) { \ - [0] = (x) | DMA_CH_VALID, \ - [1] = (x) | DMA_CH_VALID, \ - [2] = (x) | DMA_CH_VALID, \ - [3] = (x) | DMA_CH_VALID, \ - [4] = (x) | DMA_CH_VALID, \ - [5] = (x) | DMA_CH_VALID, \ - } - -static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { - [DMACH_XD0] = { - .name = "xdreq0", - .channels = MAP(S3C2443_DMAREQSEL_XDREQ0), - }, - [DMACH_XD1] = { - .name = "xdreq1", - .channels = MAP(S3C2443_DMAREQSEL_XDREQ1), - }, - [DMACH_SDI] = { /* only on S3C2443 */ - .name = "sdi", - .channels = MAP(S3C2443_DMAREQSEL_SDI), - }, - [DMACH_SPI0_RX] = { - .name = "spi0-rx", - .channels = MAP(S3C2443_DMAREQSEL_SPI0RX), - }, - [DMACH_SPI0_TX] = { - .name = "spi0-tx", - .channels = MAP(S3C2443_DMAREQSEL_SPI0TX), - }, - [DMACH_SPI1_RX] = { /* only on S3C2443/S3C2450 */ - .name = "spi1-rx", - .channels = MAP(S3C2443_DMAREQSEL_SPI1RX), - }, - [DMACH_SPI1_TX] = { /* only on S3C2443/S3C2450 */ - .name = "spi1-tx", - .channels = MAP(S3C2443_DMAREQSEL_SPI1TX), - }, - [DMACH_UART0] = { - .name = "uart0", - .channels = MAP(S3C2443_DMAREQSEL_UART0_0), - }, - [DMACH_UART1] = { - .name = "uart1", - .channels = MAP(S3C2443_DMAREQSEL_UART1_0), - }, - [DMACH_UART2] = { - .name = "uart2", - .channels = MAP(S3C2443_DMAREQSEL_UART2_0), - }, - [DMACH_UART3] = { - .name = "uart3", - .channels = MAP(S3C2443_DMAREQSEL_UART3_0), - }, - [DMACH_UART0_SRC2] = { - .name = "uart0", - .channels = MAP(S3C2443_DMAREQSEL_UART0_1), - }, - [DMACH_UART1_SRC2] = { - .name = "uart1", - .channels = MAP(S3C2443_DMAREQSEL_UART1_1), - }, - [DMACH_UART2_SRC2] = { - .name = "uart2", - .channels = MAP(S3C2443_DMAREQSEL_UART2_1), - }, - [DMACH_UART3_SRC2] = { - .name = "uart3", - .channels = MAP(S3C2443_DMAREQSEL_UART3_1), - }, - [DMACH_TIMER] = { - .name = "timer", - .channels = MAP(S3C2443_DMAREQSEL_TIMER), - }, - [DMACH_I2S_IN] = { - .name = "i2s-sdi", - .channels = MAP(S3C2443_DMAREQSEL_I2SRX), - }, - [DMACH_I2S_OUT] = { - .name = "i2s-sdo", - .channels = MAP(S3C2443_DMAREQSEL_I2STX), - }, - [DMACH_PCM_IN] = { - .name = "pcm-in", - .channels = MAP(S3C2443_DMAREQSEL_PCMIN), - }, - [DMACH_PCM_OUT] = { - .name = "pcm-out", - .channels = MAP(S3C2443_DMAREQSEL_PCMOUT), - }, - [DMACH_MIC_IN] = { - .name = "mic-in", - .channels = MAP(S3C2443_DMAREQSEL_MICIN), - }, -}; - -static void s3c2443_dma_select(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map) -{ - unsigned long chsel = map->channels[0] & (~DMA_CH_VALID); - writel(chsel | S3C2443_DMAREQSEL_HW, - chan->regs + S3C2443_DMA_DMAREQSEL); -} - -static struct s3c24xx_dma_selection __initdata s3c2443_dma_sel = { - .select = s3c2443_dma_select, - .dcon_mask = 0, - .map = s3c2443_dma_mappings, - .map_size = ARRAY_SIZE(s3c2443_dma_mappings), -}; - -static int __init s3c2443_dma_add(struct device *dev, - struct subsys_interface *sif) -{ - s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100); - return s3c24xx_dma_init_map(&s3c2443_dma_sel); -} - -#ifdef CONFIG_CPU_S3C2416 -/* S3C2416 DMA contains the same selection table as the S3C2443 */ -static struct subsys_interface s3c2416_dma_interface = { - .name = "s3c2416_dma", - .subsys = &s3c2416_subsys, - .add_dev = s3c2443_dma_add, -}; - -static int __init s3c2416_dma_init(void) -{ - return subsys_interface_register(&s3c2416_dma_interface); -} - -arch_initcall(s3c2416_dma_init); -#endif - -#ifdef CONFIG_CPU_S3C2443 -static struct subsys_interface s3c2443_dma_interface = { - .name = "s3c2443_dma", - .subsys = &s3c2443_subsys, - .add_dev = s3c2443_dma_add, -}; - -static int __init s3c2443_dma_init(void) -{ - return subsys_interface_register(&s3c2443_dma_interface); -} - -arch_initcall(s3c2443_dma_init); -#endif diff --git a/arch/arm/mach-s3c24xx/dma.c b/arch/arm/mach-s3c24xx/dma.c deleted file mode 100644 index a8dafc174fe3..000000000000 --- a/arch/arm/mach-s3c24xx/dma.c +++ /dev/null @@ -1,1465 +0,0 @@ -/* - * Copyright 2003-2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 DMA core - * - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - -#ifdef CONFIG_S3C2410_DMA_DEBUG -#define DEBUG -#endif - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/syscore_ops.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <mach/hardware.h> -#include <mach/dma.h> -#include <mach/map.h> - -#include <plat/dma-s3c24xx.h> -#include <plat/regs-dma.h> - -/* io map for dma */ -static void __iomem *dma_base; -static struct kmem_cache *dma_kmem; - -static int dma_channels; - -static struct s3c24xx_dma_selection dma_sel; - - -/* debugging functions */ - -#define BUF_MAGIC (0xcafebabe) - -#define dmawarn(fmt...) printk(KERN_DEBUG fmt) - -#define dma_regaddr(chan, reg) ((chan)->regs + (reg)) - -#if 1 -#define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg)) -#else -static inline void -dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val) -{ - pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg); - writel(val, dma_regaddr(chan, reg)); -} -#endif - -#define dma_rdreg(chan, reg) readl((chan)->regs + (reg)) - -/* captured register state for debug */ - -struct s3c2410_dma_regstate { - unsigned long dcsrc; - unsigned long disrc; - unsigned long dstat; - unsigned long dcon; - unsigned long dmsktrig; -}; - -#ifdef CONFIG_S3C2410_DMA_DEBUG - -/* dmadbg_showregs - * - * simple debug routine to print the current state of the dma registers -*/ - -static void -dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs) -{ - regs->dcsrc = dma_rdreg(chan, S3C2410_DMA_DCSRC); - regs->disrc = dma_rdreg(chan, S3C2410_DMA_DISRC); - regs->dstat = dma_rdreg(chan, S3C2410_DMA_DSTAT); - regs->dcon = dma_rdreg(chan, S3C2410_DMA_DCON); - regs->dmsktrig = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); -} - -static void -dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan, - struct s3c2410_dma_regstate *regs) -{ - printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n", - chan->number, fname, line, - regs->dcsrc, regs->disrc, regs->dstat, regs->dmsktrig, - regs->dcon); -} - -static void -dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan) -{ - struct s3c2410_dma_regstate state; - - dmadbg_capture(chan, &state); - - printk(KERN_DEBUG "dma%d: %s:%d: ls=%d, cur=%p, %p %p\n", - chan->number, fname, line, chan->load_state, - chan->curr, chan->next, chan->end); - - dmadbg_dumpregs(fname, line, chan, &state); -} - -static void -dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan) -{ - struct s3c2410_dma_regstate state; - - dmadbg_capture(chan, &state); - dmadbg_dumpregs(fname, line, chan, &state); -} - -#define dbg_showregs(chan) dmadbg_showregs(__func__, __LINE__, (chan)) -#define dbg_showchan(chan) dmadbg_showchan(__func__, __LINE__, (chan)) -#else -#define dbg_showregs(chan) do { } while(0) -#define dbg_showchan(chan) do { } while(0) -#endif /* CONFIG_S3C2410_DMA_DEBUG */ - -/* s3c2410_dma_stats_timeout - * - * Update DMA stats from timeout info -*/ - -static void -s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val) -{ - if (stats == NULL) - return; - - if (val > stats->timeout_longest) - stats->timeout_longest = val; - if (val < stats->timeout_shortest) - stats->timeout_shortest = val; - - stats->timeout_avg += val; -} - -/* s3c2410_dma_waitforload - * - * wait for the DMA engine to load a buffer, and update the state accordingly -*/ - -static int -s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line) -{ - int timeout = chan->load_timeout; - int took; - - if (chan->load_state != S3C2410_DMALOAD_1LOADED) { - printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line); - return 0; - } - - if (chan->stats != NULL) - chan->stats->loads++; - - while (--timeout > 0) { - if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) { - took = chan->load_timeout - timeout; - - s3c2410_dma_stats_timeout(chan->stats, took); - - switch (chan->load_state) { - case S3C2410_DMALOAD_1LOADED: - chan->load_state = S3C2410_DMALOAD_1RUNNING; - break; - - default: - printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state); - } - - return 1; - } - } - - if (chan->stats != NULL) { - chan->stats->timeout_failed++; - } - - return 0; -} - -/* s3c2410_dma_loadbuffer - * - * load a buffer, and update the channel state -*/ - -static inline int -s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan, - struct s3c2410_dma_buf *buf) -{ - unsigned long reload; - - if (buf == NULL) { - dmawarn("buffer is NULL\n"); - return -EINVAL; - } - - pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n", - buf, (unsigned long)buf->data, buf->size); - - /* check the state of the channel before we do anything */ - - if (chan->load_state == S3C2410_DMALOAD_1LOADED) { - dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n"); - } - - if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) { - dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n"); - } - - /* it would seem sensible if we are the last buffer to not bother - * with the auto-reload bit, so that the DMA engine will not try - * and load another transfer after this one has finished... - */ - if (chan->load_state == S3C2410_DMALOAD_NONE) { - pr_debug("load_state is none, checking for noreload (next=%p)\n", - buf->next); - reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0; - } else { - //pr_debug("load_state is %d => autoreload\n", chan->load_state); - reload = S3C2410_DCON_AUTORELOAD; - } - - if ((buf->data & 0xf0000000) != 0x30000000) { - dmawarn("dmaload: buffer is %p\n", (void *)buf->data); - } - - writel(buf->data, chan->addr_reg); - - dma_wrreg(chan, S3C2410_DMA_DCON, - chan->dcon | reload | (buf->size/chan->xfer_unit)); - - chan->next = buf->next; - - /* update the state of the channel */ - - switch (chan->load_state) { - case S3C2410_DMALOAD_NONE: - chan->load_state = S3C2410_DMALOAD_1LOADED; - break; - - case S3C2410_DMALOAD_1RUNNING: - chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING; - break; - - default: - dmawarn("dmaload: unknown state %d in loadbuffer\n", - chan->load_state); - break; - } - - return 0; -} - -/* s3c2410_dma_call_op - * - * small routine to call the op routine with the given op if it has been - * registered -*/ - -static void -s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op) -{ - if (chan->op_fn != NULL) { - (chan->op_fn)(chan, op); - } -} - -/* s3c2410_dma_buffdone - * - * small wrapper to check if callback routine needs to be called, and - * if so, call it -*/ - -static inline void -s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf, - enum s3c2410_dma_buffresult result) -{ -#if 0 - pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n", - chan->callback_fn, buf, buf->id, buf->size, result); -#endif - - if (chan->callback_fn != NULL) { - (chan->callback_fn)(chan, buf->id, buf->size, result); - } -} - -/* s3c2410_dma_start - * - * start a dma channel going -*/ - -static int s3c2410_dma_start(struct s3c2410_dma_chan *chan) -{ - unsigned long tmp; - unsigned long flags; - - pr_debug("s3c2410_start_dma: channel=%d\n", chan->number); - - local_irq_save(flags); - - if (chan->state == S3C2410_DMA_RUNNING) { - pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state); - local_irq_restore(flags); - return 0; - } - - chan->state = S3C2410_DMA_RUNNING; - - /* check whether there is anything to load, and if not, see - * if we can find anything to load - */ - - if (chan->load_state == S3C2410_DMALOAD_NONE) { - if (chan->next == NULL) { - printk(KERN_ERR "dma%d: channel has nothing loaded\n", - chan->number); - chan->state = S3C2410_DMA_IDLE; - local_irq_restore(flags); - return -EINVAL; - } - - s3c2410_dma_loadbuffer(chan, chan->next); - } - - dbg_showchan(chan); - - /* enable the channel */ - - if (!chan->irq_enabled) { - enable_irq(chan->irq); - chan->irq_enabled = 1; - } - - /* start the channel going */ - - tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); - tmp &= ~S3C2410_DMASKTRIG_STOP; - tmp |= S3C2410_DMASKTRIG_ON; - dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp); - - pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp); - -#if 0 - /* the dma buffer loads should take care of clearing the AUTO - * reloading feature */ - tmp = dma_rdreg(chan, S3C2410_DMA_DCON); - tmp &= ~S3C2410_DCON_NORELOAD; - dma_wrreg(chan, S3C2410_DMA_DCON, tmp); -#endif - - s3c2410_dma_call_op(chan, S3C2410_DMAOP_START); - - dbg_showchan(chan); - - /* if we've only loaded one buffer onto the channel, then chec - * to see if we have another, and if so, try and load it so when - * the first buffer is finished, the new one will be loaded onto - * the channel */ - - if (chan->next != NULL) { - if (chan->load_state == S3C2410_DMALOAD_1LOADED) { - - if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { - pr_debug("%s: buff not yet loaded, no more todo\n", - __func__); - } else { - chan->load_state = S3C2410_DMALOAD_1RUNNING; - s3c2410_dma_loadbuffer(chan, chan->next); - } - - } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) { - s3c2410_dma_loadbuffer(chan, chan->next); - } - } - - - local_irq_restore(flags); - - return 0; -} - -/* s3c2410_dma_canload - * - * work out if we can queue another buffer into the DMA engine -*/ - -static int -s3c2410_dma_canload(struct s3c2410_dma_chan *chan) -{ - if (chan->load_state == S3C2410_DMALOAD_NONE || - chan->load_state == S3C2410_DMALOAD_1RUNNING) - return 1; - - return 0; -} - -/* s3c2410_dma_enqueue - * - * queue an given buffer for dma transfer. - * - * id the device driver's id information for this buffer - * data the physical address of the buffer data - * size the size of the buffer in bytes - * - * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART - * is checked, and if set, the channel is started. If this flag isn't set, - * then an error will be returned. - * - * It is possible to queue more than one DMA buffer onto a channel at - * once, and the code will deal with the re-loading of the next buffer - * when necessary. -*/ - -int s3c2410_dma_enqueue(enum dma_ch channel, void *id, - dma_addr_t data, int size) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - struct s3c2410_dma_buf *buf; - unsigned long flags; - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: id=%p, data=%08x, size=%d\n", - __func__, id, (unsigned int)data, size); - - buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC); - if (buf == NULL) { - pr_debug("%s: out of memory (%ld alloc)\n", - __func__, (long)sizeof(*buf)); - return -ENOMEM; - } - - //pr_debug("%s: new buffer %p\n", __func__, buf); - //dbg_showchan(chan); - - buf->next = NULL; - buf->data = buf->ptr = data; - buf->size = size; - buf->id = id; - buf->magic = BUF_MAGIC; - - local_irq_save(flags); - - if (chan->curr == NULL) { - /* we've got nothing loaded... */ - pr_debug("%s: buffer %p queued onto empty channel\n", - __func__, buf); - - chan->curr = buf; - chan->end = buf; - chan->next = NULL; - } else { - pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n", - chan->number, __func__, buf); - - if (chan->end == NULL) { - pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n", - chan->number, __func__, chan); - } else { - chan->end->next = buf; - chan->end = buf; - } - } - - /* if necessary, update the next buffer field */ - if (chan->next == NULL) - chan->next = buf; - - /* check to see if we can load a buffer */ - if (chan->state == S3C2410_DMA_RUNNING) { - if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) { - if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { - printk(KERN_ERR "dma%d: loadbuffer:" - "timeout loading buffer\n", - chan->number); - dbg_showchan(chan); - local_irq_restore(flags); - return -EINVAL; - } - } - - while (s3c2410_dma_canload(chan) && chan->next != NULL) { - s3c2410_dma_loadbuffer(chan, chan->next); - } - } else if (chan->state == S3C2410_DMA_IDLE) { - if (chan->flags & S3C2410_DMAF_AUTOSTART) { - s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL, - S3C2410_DMAOP_START); - } - } - - local_irq_restore(flags); - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_enqueue); - -static inline void -s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf) -{ - int magicok = (buf->magic == BUF_MAGIC); - - buf->magic = -1; - - if (magicok) { - kmem_cache_free(dma_kmem, buf); - } else { - printk("s3c2410_dma_freebuf: buff %p with bad magic\n", buf); - } -} - -/* s3c2410_dma_lastxfer - * - * called when the system is out of buffers, to ensure that the channel - * is prepared for shutdown. -*/ - -static inline void -s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan) -{ -#if 0 - pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n", - chan->number, chan->load_state); -#endif - - switch (chan->load_state) { - case S3C2410_DMALOAD_NONE: - break; - - case S3C2410_DMALOAD_1LOADED: - if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { - /* flag error? */ - printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", - chan->number, __func__); - return; - } - break; - - case S3C2410_DMALOAD_1LOADED_1RUNNING: - /* I believe in this case we do not have anything to do - * until the next buffer comes along, and we turn off the - * reload */ - return; - - default: - pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n", - chan->number, chan->load_state); - return; - - } - - /* hopefully this'll shut the damned thing up after the transfer... */ - dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD); -} - - -#define dmadbg2(x...) - -static irqreturn_t -s3c2410_dma_irq(int irq, void *devpw) -{ - struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw; - struct s3c2410_dma_buf *buf; - - buf = chan->curr; - - dbg_showchan(chan); - - /* modify the channel state */ - - switch (chan->load_state) { - case S3C2410_DMALOAD_1RUNNING: - /* TODO - if we are running only one buffer, we probably - * want to reload here, and then worry about the buffer - * callback */ - - chan->load_state = S3C2410_DMALOAD_NONE; - break; - - case S3C2410_DMALOAD_1LOADED: - /* iirc, we should go back to NONE loaded here, we - * had a buffer, and it was never verified as being - * loaded. - */ - - chan->load_state = S3C2410_DMALOAD_NONE; - break; - - case S3C2410_DMALOAD_1LOADED_1RUNNING: - /* we'll worry about checking to see if another buffer is - * ready after we've called back the owner. This should - * ensure we do not wait around too long for the DMA - * engine to start the next transfer - */ - - chan->load_state = S3C2410_DMALOAD_1LOADED; - break; - - case S3C2410_DMALOAD_NONE: - printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n", - chan->number); - break; - - default: - printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n", - chan->number, chan->load_state); - break; - } - - if (buf != NULL) { - /* update the chain to make sure that if we load any more - * buffers when we call the callback function, things should - * work properly */ - - chan->curr = buf->next; - buf->next = NULL; - - if (buf->magic != BUF_MAGIC) { - printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n", - chan->number, __func__, buf); - return IRQ_HANDLED; - } - - s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK); - - /* free resouces */ - s3c2410_dma_freebuf(buf); - } else { - } - - /* only reload if the channel is still running... our buffer done - * routine may have altered the state by requesting the dma channel - * to stop or shutdown... */ - - /* todo: check that when the channel is shut-down from inside this - * function, we cope with unsetting reload, etc */ - - if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) { - unsigned long flags; - - switch (chan->load_state) { - case S3C2410_DMALOAD_1RUNNING: - /* don't need to do anything for this state */ - break; - - case S3C2410_DMALOAD_NONE: - /* can load buffer immediately */ - break; - - case S3C2410_DMALOAD_1LOADED: - if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { - /* flag error? */ - printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", - chan->number, __func__); - return IRQ_HANDLED; - } - - break; - - case S3C2410_DMALOAD_1LOADED_1RUNNING: - goto no_load; - - default: - printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n", - chan->number, chan->load_state); - return IRQ_HANDLED; - } - - local_irq_save(flags); - s3c2410_dma_loadbuffer(chan, chan->next); - local_irq_restore(flags); - } else { - s3c2410_dma_lastxfer(chan); - - /* see if we can stop this channel.. */ - if (chan->load_state == S3C2410_DMALOAD_NONE) { - pr_debug("dma%d: end of transfer, stopping channel (%ld)\n", - chan->number, jiffies); - s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL, - S3C2410_DMAOP_STOP); - } - } - - no_load: - return IRQ_HANDLED; -} - -static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel); - -/* s3c2410_request_dma - * - * get control of an dma channel -*/ - -int s3c2410_dma_request(enum dma_ch channel, - struct s3c2410_dma_client *client, - void *dev) -{ - struct s3c2410_dma_chan *chan; - unsigned long flags; - int err; - - pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n", - channel, client->name, dev); - - local_irq_save(flags); - - chan = s3c2410_dma_map_channel(channel); - if (chan == NULL) { - local_irq_restore(flags); - return -EBUSY; - } - - dbg_showchan(chan); - - chan->client = client; - chan->in_use = 1; - - if (!chan->irq_claimed) { - pr_debug("dma%d: %s : requesting irq %d\n", - channel, __func__, chan->irq); - - chan->irq_claimed = 1; - local_irq_restore(flags); - - err = request_irq(chan->irq, s3c2410_dma_irq, 0, - client->name, (void *)chan); - - local_irq_save(flags); - - if (err) { - chan->in_use = 0; - chan->irq_claimed = 0; - local_irq_restore(flags); - - printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n", - client->name, chan->irq, chan->number); - return err; - } - - chan->irq_enabled = 1; - } - - local_irq_restore(flags); - - /* need to setup */ - - pr_debug("%s: channel initialised, %p\n", __func__, chan); - - return chan->number | DMACH_LOW_LEVEL; -} - -EXPORT_SYMBOL(s3c2410_dma_request); - -/* s3c2410_dma_free - * - * release the given channel back to the system, will stop and flush - * any outstanding transfers, and ensure the channel is ready for the - * next claimant. - * - * Note, although a warning is currently printed if the freeing client - * info is not the same as the registrant's client info, the free is still - * allowed to go through. -*/ - -int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - unsigned long flags; - - if (chan == NULL) - return -EINVAL; - - local_irq_save(flags); - - if (chan->client != client) { - printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n", - channel, chan->client, client); - } - - /* sort out stopping and freeing the channel */ - - if (chan->state != S3C2410_DMA_IDLE) { - pr_debug("%s: need to stop dma channel %p\n", - __func__, chan); - - /* possibly flush the channel */ - s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP); - } - - chan->client = NULL; - chan->in_use = 0; - - if (chan->irq_claimed) - free_irq(chan->irq, (void *)chan); - - chan->irq_claimed = 0; - - if (!(channel & DMACH_LOW_LEVEL)) - s3c_dma_chan_map[channel] = NULL; - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_free); - -static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan) -{ - unsigned long flags; - unsigned long tmp; - - pr_debug("%s:\n", __func__); - - dbg_showchan(chan); - - local_irq_save(flags); - - s3c2410_dma_call_op(chan, S3C2410_DMAOP_STOP); - - tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); - tmp |= S3C2410_DMASKTRIG_STOP; - //tmp &= ~S3C2410_DMASKTRIG_ON; - dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp); - -#if 0 - /* should also clear interrupts, according to WinCE BSP */ - tmp = dma_rdreg(chan, S3C2410_DMA_DCON); - tmp |= S3C2410_DCON_NORELOAD; - dma_wrreg(chan, S3C2410_DMA_DCON, tmp); -#endif - - /* should stop do this, or should we wait for flush? */ - chan->state = S3C2410_DMA_IDLE; - chan->load_state = S3C2410_DMALOAD_NONE; - - local_irq_restore(flags); - - return 0; -} - -static void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan) -{ - unsigned long tmp; - unsigned int timeout = 0x10000; - - while (timeout-- > 0) { - tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); - - if (!(tmp & S3C2410_DMASKTRIG_ON)) - return; - } - - pr_debug("dma%d: failed to stop?\n", chan->number); -} - - -/* s3c2410_dma_flush - * - * stop the channel, and remove all current and pending transfers -*/ - -static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan) -{ - struct s3c2410_dma_buf *buf, *next; - unsigned long flags; - - pr_debug("%s: chan %p (%d)\n", __func__, chan, chan->number); - - dbg_showchan(chan); - - local_irq_save(flags); - - if (chan->state != S3C2410_DMA_IDLE) { - pr_debug("%s: stopping channel...\n", __func__ ); - s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP); - } - - buf = chan->curr; - if (buf == NULL) - buf = chan->next; - - chan->curr = chan->next = chan->end = NULL; - - if (buf != NULL) { - for ( ; buf != NULL; buf = next) { - next = buf->next; - - pr_debug("%s: free buffer %p, next %p\n", - __func__, buf, buf->next); - - s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT); - s3c2410_dma_freebuf(buf); - } - } - - dbg_showregs(chan); - - s3c2410_dma_waitforstop(chan); - -#if 0 - /* should also clear interrupts, according to WinCE BSP */ - { - unsigned long tmp; - - tmp = dma_rdreg(chan, S3C2410_DMA_DCON); - tmp |= S3C2410_DCON_NORELOAD; - dma_wrreg(chan, S3C2410_DMA_DCON, tmp); - } -#endif - - dbg_showregs(chan); - - local_irq_restore(flags); - - return 0; -} - -static int s3c2410_dma_started(struct s3c2410_dma_chan *chan) -{ - unsigned long flags; - - local_irq_save(flags); - - dbg_showchan(chan); - - /* if we've only loaded one buffer onto the channel, then chec - * to see if we have another, and if so, try and load it so when - * the first buffer is finished, the new one will be loaded onto - * the channel */ - - if (chan->next != NULL) { - if (chan->load_state == S3C2410_DMALOAD_1LOADED) { - - if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { - pr_debug("%s: buff not yet loaded, no more todo\n", - __func__); - } else { - chan->load_state = S3C2410_DMALOAD_1RUNNING; - s3c2410_dma_loadbuffer(chan, chan->next); - } - - } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) { - s3c2410_dma_loadbuffer(chan, chan->next); - } - } - - - local_irq_restore(flags); - - return 0; - -} - -int -s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - - if (chan == NULL) - return -EINVAL; - - switch (op) { - case S3C2410_DMAOP_START: - return s3c2410_dma_start(chan); - - case S3C2410_DMAOP_STOP: - return s3c2410_dma_dostop(chan); - - case S3C2410_DMAOP_PAUSE: - case S3C2410_DMAOP_RESUME: - return -ENOENT; - - case S3C2410_DMAOP_FLUSH: - return s3c2410_dma_flush(chan); - - case S3C2410_DMAOP_STARTED: - return s3c2410_dma_started(chan); - - case S3C2410_DMAOP_TIMEOUT: - return 0; - - } - - return -ENOENT; /* unknown, don't bother */ -} - -EXPORT_SYMBOL(s3c2410_dma_ctrl); - -/* DMA configuration for each channel - * - * DISRCC -> source of the DMA (AHB,APB) - * DISRC -> source address of the DMA - * DIDSTC -> destination of the DMA (AHB,APD) - * DIDST -> destination address of the DMA -*/ - -/* s3c2410_dma_config - * - * xfersize: size of unit in bytes (1,2,4) -*/ - -int s3c2410_dma_config(enum dma_ch channel, - int xferunit) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - unsigned int dcon; - - pr_debug("%s: chan=%d, xfer_unit=%d\n", __func__, channel, xferunit); - - if (chan == NULL) - return -EINVAL; - - dcon = chan->dcon & dma_sel.dcon_mask; - pr_debug("%s: dcon is %08x\n", __func__, dcon); - - switch (chan->req_ch) { - case DMACH_I2S_IN: - case DMACH_I2S_OUT: - case DMACH_PCM_IN: - case DMACH_PCM_OUT: - case DMACH_MIC_IN: - default: - dcon |= S3C2410_DCON_HANDSHAKE; - dcon |= S3C2410_DCON_SYNC_PCLK; - break; - - case DMACH_SDI: - /* note, ensure if need HANDSHAKE or not */ - dcon |= S3C2410_DCON_SYNC_PCLK; - break; - - case DMACH_XD0: - case DMACH_XD1: - dcon |= S3C2410_DCON_HANDSHAKE; - dcon |= S3C2410_DCON_SYNC_HCLK; - break; - } - - switch (xferunit) { - case 1: - dcon |= S3C2410_DCON_BYTE; - break; - - case 2: - dcon |= S3C2410_DCON_HALFWORD; - break; - - case 4: - dcon |= S3C2410_DCON_WORD; - break; - - default: - pr_debug("%s: bad transfer size %d\n", __func__, xferunit); - return -EINVAL; - } - - dcon |= S3C2410_DCON_HWTRIG; - dcon |= S3C2410_DCON_INTREQ; - - pr_debug("%s: dcon now %08x\n", __func__, dcon); - - chan->dcon = dcon; - chan->xfer_unit = xferunit; - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_config); - - -/* s3c2410_dma_devconfig - * - * configure the dma source/destination hardware type and address - * - * source: DMA_FROM_DEVICE: source is hardware - * DMA_TO_DEVICE: source is memory - * - * devaddr: physical address of the source -*/ - -int s3c2410_dma_devconfig(enum dma_ch channel, - enum dma_data_direction source, - unsigned long devaddr) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - unsigned int hwcfg; - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: source=%d, devaddr=%08lx\n", - __func__, (int)source, devaddr); - - chan->source = source; - chan->dev_addr = devaddr; - - switch (chan->req_ch) { - case DMACH_XD0: - case DMACH_XD1: - hwcfg = 0; /* AHB */ - break; - - default: - hwcfg = S3C2410_DISRCC_APB; - } - - /* always assume our peripheral desintation is a fixed - * address in memory. */ - hwcfg |= S3C2410_DISRCC_INC; - - switch (source) { - case DMA_FROM_DEVICE: - /* source is hardware */ - pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n", - __func__, devaddr, hwcfg); - dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3); - dma_wrreg(chan, S3C2410_DMA_DISRC, devaddr); - dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0)); - - chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST); - break; - - case DMA_TO_DEVICE: - /* source is memory */ - pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n", - __func__, devaddr, hwcfg); - dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0)); - dma_wrreg(chan, S3C2410_DMA_DIDST, devaddr); - dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3); - - chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC); - break; - - default: - printk(KERN_ERR "dma%d: invalid source type (%d)\n", - channel, source); - - return -EINVAL; - } - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_devconfig); - -/* s3c2410_dma_getposition - * - * returns the current transfer points for the dma source and destination -*/ - -int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dst) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - - if (chan == NULL) - return -EINVAL; - - if (src != NULL) - *src = dma_rdreg(chan, S3C2410_DMA_DCSRC); - - if (dst != NULL) - *dst = dma_rdreg(chan, S3C2410_DMA_DCDST); - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_getposition); - -/* system core operations */ - -#ifdef CONFIG_PM - -static void s3c2410_dma_suspend_chan(struct s3c2410_dma_chan *cp) -{ - printk(KERN_DEBUG "suspending dma channel %d\n", cp->number); - - if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) { - /* the dma channel is still working, which is probably - * a bad thing to do over suspend/resume. We stop the - * channel and assume that the client is either going to - * retry after resume, or that it is broken. - */ - - printk(KERN_INFO "dma: stopping channel %d due to suspend\n", - cp->number); - - s3c2410_dma_dostop(cp); - } -} - -static int s3c2410_dma_suspend(void) -{ - struct s3c2410_dma_chan *cp = s3c2410_chans; - int channel; - - for (channel = 0; channel < dma_channels; cp++, channel++) - s3c2410_dma_suspend_chan(cp); - - return 0; -} - -static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp) -{ - unsigned int no = cp->number | DMACH_LOW_LEVEL; - - /* restore channel's hardware configuration */ - - if (!cp->in_use) - return; - - printk(KERN_INFO "dma%d: restoring configuration\n", cp->number); - - s3c2410_dma_config(no, cp->xfer_unit); - s3c2410_dma_devconfig(no, cp->source, cp->dev_addr); - - /* re-select the dma source for this channel */ - - if (cp->map != NULL) - dma_sel.select(cp, cp->map); -} - -static void s3c2410_dma_resume(void) -{ - struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1; - int channel; - - for (channel = dma_channels - 1; channel >= 0; cp--, channel--) - s3c2410_dma_resume_chan(cp); -} - -#else -#define s3c2410_dma_suspend NULL -#define s3c2410_dma_resume NULL -#endif /* CONFIG_PM */ - -struct syscore_ops dma_syscore_ops = { - .suspend = s3c2410_dma_suspend, - .resume = s3c2410_dma_resume, -}; - -/* kmem cache implementation */ - -static void s3c2410_dma_cache_ctor(void *p) -{ - memset(p, 0, sizeof(struct s3c2410_dma_buf)); -} - -/* initialisation code */ - -static int __init s3c24xx_dma_syscore_init(void) -{ - register_syscore_ops(&dma_syscore_ops); - - return 0; -} - -late_initcall(s3c24xx_dma_syscore_init); - -int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq, - unsigned int stride) -{ - struct s3c2410_dma_chan *cp; - int channel; - int ret; - - printk("S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics\n"); - - dma_channels = channels; - - dma_base = ioremap(S3C24XX_PA_DMA, stride * channels); - if (dma_base == NULL) { - printk(KERN_ERR "dma failed to remap register block\n"); - return -ENOMEM; - } - - dma_kmem = kmem_cache_create("dma_desc", - sizeof(struct s3c2410_dma_buf), 0, - SLAB_HWCACHE_ALIGN, - s3c2410_dma_cache_ctor); - - if (dma_kmem == NULL) { - printk(KERN_ERR "dma failed to make kmem cache\n"); - ret = -ENOMEM; - goto err; - } - - for (channel = 0; channel < channels; channel++) { - cp = &s3c2410_chans[channel]; - - memset(cp, 0, sizeof(struct s3c2410_dma_chan)); - - /* dma channel irqs are in order.. */ - cp->number = channel; - cp->irq = channel + irq; - cp->regs = dma_base + (channel * stride); - - /* point current stats somewhere */ - cp->stats = &cp->stats_store; - cp->stats_store.timeout_shortest = LONG_MAX; - - /* basic channel configuration */ - - cp->load_timeout = 1<<18; - - printk("DMA channel %d at %p, irq %d\n", - cp->number, cp->regs, cp->irq); - } - - return 0; - - err: - kmem_cache_destroy(dma_kmem); - iounmap(dma_base); - dma_base = NULL; - return ret; -} - -int __init s3c2410_dma_init(void) -{ - return s3c24xx_dma_init(4, IRQ_DMA0, 0x40); -} - -static inline int is_channel_valid(unsigned int channel) -{ - return (channel & DMA_CH_VALID); -} - -static struct s3c24xx_dma_order *dma_order; - - -/* s3c2410_dma_map_channel() - * - * turn the virtual channel number into a real, and un-used hardware - * channel. - * - * first, try the dma ordering given to us by either the relevant - * dma code, or the board. Then just find the first usable free - * channel -*/ - -static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel) -{ - struct s3c24xx_dma_order_ch *ord = NULL; - struct s3c24xx_dma_map *ch_map; - struct s3c2410_dma_chan *dmach; - int ch; - - if (dma_sel.map == NULL || channel > dma_sel.map_size) - return NULL; - - ch_map = dma_sel.map + channel; - - /* first, try the board mapping */ - - if (dma_order) { - ord = &dma_order->channels[channel]; - - for (ch = 0; ch < dma_channels; ch++) { - int tmp; - if (!is_channel_valid(ord->list[ch])) - continue; - - tmp = ord->list[ch] & ~DMA_CH_VALID; - if (s3c2410_chans[tmp].in_use == 0) { - ch = tmp; - goto found; - } - } - - if (ord->flags & DMA_CH_NEVER) - return NULL; - } - - /* second, search the channel map for first free */ - - for (ch = 0; ch < dma_channels; ch++) { - if (!is_channel_valid(ch_map->channels[ch])) - continue; - - if (s3c2410_chans[ch].in_use == 0) { - printk("mapped channel %d to %d\n", channel, ch); - break; - } - } - - if (ch >= dma_channels) - return NULL; - - /* update our channel mapping */ - - found: - dmach = &s3c2410_chans[ch]; - dmach->map = ch_map; - dmach->req_ch = channel; - s3c_dma_chan_map[channel] = dmach; - - /* select the channel */ - - (dma_sel.select)(dmach, ch_map); - - return dmach; -} - -static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch) -{ - return 0; -} - -int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel) -{ - struct s3c24xx_dma_map *nmap; - size_t map_sz = sizeof(*nmap) * sel->map_size; - int ptr; - - nmap = kmemdup(sel->map, map_sz, GFP_KERNEL); - if (nmap == NULL) - return -ENOMEM; - - memcpy(&dma_sel, sel, sizeof(*sel)); - - dma_sel.map = nmap; - - for (ptr = 0; ptr < sel->map_size; ptr++) - s3c24xx_dma_check_entry(nmap+ptr, ptr); - - return 0; -} - -int __init s3c24xx_dma_order_set(struct s3c24xx_dma_order *ord) -{ - struct s3c24xx_dma_order *nord = dma_order; - - if (nord == NULL) - nord = kmalloc(sizeof(struct s3c24xx_dma_order), GFP_KERNEL); - - if (nord == NULL) { - printk(KERN_ERR "no memory to store dma channel order\n"); - return -ENOMEM; - } - - dma_order = nord; - memcpy(nord, ord, sizeof(struct s3c24xx_dma_order)); - return 0; -} diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index b55da1d8cd8f..9e8117198e0c 100644 --- a/arch/arm/mach-s3c24xx/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h @@ -15,8 +15,6 @@ #include <linux/device.h> -#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */ - /* We use `virtual` dma channels to hide the fact we have only a limited * number of DMA channels, and not of all of them (dependent on the device) * can be attached to any DMA source. We therefore let the DMA core handle @@ -54,161 +52,4 @@ enum dma_ch { DMACH_MAX, /* the end entry */ }; -static inline bool samsung_dma_has_circular(void) -{ - return false; -} - -static inline bool samsung_dma_is_dmadev(void) -{ - return false; -} - -#include <plat/dma.h> - -#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ - -/* we have 4 dma channels */ -#if !defined(CONFIG_CPU_S3C2443) && !defined(CONFIG_CPU_S3C2416) -#define S3C_DMA_CHANNELS (4) -#else -#define S3C_DMA_CHANNELS (6) -#endif - -/* types */ - -enum s3c2410_dma_state { - S3C2410_DMA_IDLE, - S3C2410_DMA_RUNNING, - S3C2410_DMA_PAUSED -}; - -/* enum s3c2410_dma_loadst - * - * This represents the state of the DMA engine, wrt to the loaded / running - * transfers. Since we don't have any way of knowing exactly the state of - * the DMA transfers, we need to know the state to make decisions on whether - * we can - * - * S3C2410_DMA_NONE - * - * There are no buffers loaded (the channel should be inactive) - * - * S3C2410_DMA_1LOADED - * - * There is one buffer loaded, however it has not been confirmed to be - * loaded by the DMA engine. This may be because the channel is not - * yet running, or the DMA driver decided that it was too costly to - * sit and wait for it to happen. - * - * S3C2410_DMA_1RUNNING - * - * The buffer has been confirmed running, and not finisged - * - * S3C2410_DMA_1LOADED_1RUNNING - * - * There is a buffer waiting to be loaded by the DMA engine, and one - * currently running. -*/ - -enum s3c2410_dma_loadst { - S3C2410_DMALOAD_NONE, - S3C2410_DMALOAD_1LOADED, - S3C2410_DMALOAD_1RUNNING, - S3C2410_DMALOAD_1LOADED_1RUNNING, -}; - - -/* flags */ - -#define S3C2410_DMAF_SLOW (1<<0) /* slow, so don't worry about - * waiting for reloads */ -#define S3C2410_DMAF_AUTOSTART (1<<1) /* auto-start if buffer queued */ - -#define S3C2410_DMAF_CIRCULAR (1 << 2) /* no circular dma support */ - -/* dma buffer */ - -struct s3c2410_dma_buf; - -/* s3c2410_dma_buf - * - * internally used buffer structure to describe a queued or running - * buffer. -*/ - -struct s3c2410_dma_buf { - struct s3c2410_dma_buf *next; - int magic; /* magic */ - int size; /* buffer size in bytes */ - dma_addr_t data; /* start of DMA data */ - dma_addr_t ptr; /* where the DMA got to [1] */ - void *id; /* client's id */ -}; - -/* [1] is this updated for both recv/send modes? */ - -struct s3c2410_dma_stats { - unsigned long loads; - unsigned long timeout_longest; - unsigned long timeout_shortest; - unsigned long timeout_avg; - unsigned long timeout_failed; -}; - -struct s3c2410_dma_map; - -/* struct s3c2410_dma_chan - * - * full state information for each DMA channel -*/ - -struct s3c2410_dma_chan { - /* channel state flags and information */ - unsigned char number; /* number of this dma channel */ - unsigned char in_use; /* channel allocated */ - unsigned char irq_claimed; /* irq claimed for channel */ - unsigned char irq_enabled; /* irq enabled for channel */ - unsigned char xfer_unit; /* size of an transfer */ - - /* channel state */ - - enum s3c2410_dma_state state; - enum s3c2410_dma_loadst load_state; - struct s3c2410_dma_client *client; - - /* channel configuration */ - enum dma_data_direction source; - enum dma_ch req_ch; - unsigned long dev_addr; - unsigned long load_timeout; - unsigned int flags; /* channel flags */ - - struct s3c24xx_dma_map *map; /* channel hw maps */ - - /* channel's hardware position and configuration */ - void __iomem *regs; /* channels registers */ - void __iomem *addr_reg; /* data address register */ - unsigned int irq; /* channel irq */ - unsigned long dcon; /* default value of DCON */ - - /* driver handles */ - s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */ - s3c2410_dma_opfn_t op_fn; /* channel op callback */ - - /* stats gathering */ - struct s3c2410_dma_stats *stats; - struct s3c2410_dma_stats stats_store; - - /* buffer list and information */ - struct s3c2410_dma_buf *curr; /* current dma buffer */ - struct s3c2410_dma_buf *next; /* next buffer to load */ - struct s3c2410_dma_buf *end; /* end of queue */ - - /* system device */ - struct device dev; -}; - -typedef unsigned long dma_device_t; - #endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h index 059b1fc85037..096e14073bd9 100644 --- a/arch/arm/mach-s3c64xx/include/mach/dma.h +++ b/arch/arm/mach-s3c64xx/include/mach/dma.h @@ -51,21 +51,6 @@ enum dma_ch { DMACH_MAX = 32 }; -struct s3c2410_dma_client { - char *name; -}; - -static inline bool samsung_dma_has_circular(void) -{ - return true; -} - -static inline bool samsung_dma_is_dmadev(void) -{ - return true; -} - #include <linux/amba/pl08x.h> -#include <plat/dma-ops.h> #endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s5pv210/s5pv210.c b/arch/arm/mach-s5pv210/s5pv210.c index 43eb1eaea0c9..83e656ea95ae 100644 --- a/arch/arm/mach-s5pv210/s5pv210.c +++ b/arch/arm/mach-s5pv210/s5pv210.c @@ -63,7 +63,7 @@ static void __init s5pv210_dt_init_late(void) s5pv210_pm_init(); } -static char const *s5pv210_dt_compat[] __initconst = { +static char const *const s5pv210_dt_compat[] __initconst = { "samsung,s5pc110", "samsung,s5pv210", NULL diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index f1114d11fe13..61ff91e76e0a 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o +obj-y := clock.o generic.o irq.o #nmi-oopser.o # Specific board support obj-$(CONFIG_SA1100_ASSABET) += assabet.o diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 7dd894ece9ae..d28ecb9ef172 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -37,7 +37,7 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <asm/mach/irda.h> +#include <linux/platform_data/irda-sa11x0.h> #include <asm/mach/map.h> #include <mach/assabet.h> #include <linux/platform_data/mfd-mcp-sa11x0.h> diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c index 03c75a811cb0..cbf53bb9c814 100644 --- a/arch/arm/mach-sa1100/clock.c +++ b/arch/arm/mach-sa1100/clock.c @@ -119,6 +119,17 @@ static DEFINE_CLK(gpio27, &clk_gpio27_ops); static DEFINE_CLK(cpu, &clk_cpu_ops); +static unsigned long clk_36864_get_rate(struct clk *clk) +{ + return 3686400; +} + +static struct clkops clk_36864_ops = { + .get_rate = clk_36864_get_rate, +}; + +static DEFINE_CLK(36864, &clk_36864_ops); + static struct clk_lookup sa11xx_clkregs[] = { CLKDEV_INIT("sa1111.0", NULL, &clk_gpio27), CLKDEV_INIT("sa1100-rtc", NULL, NULL), @@ -126,6 +137,7 @@ static struct clk_lookup sa11xx_clkregs[] = { CLKDEV_INIT("sa11x0-pcmcia", NULL, &clk_cpu), /* sa1111 names devices using internal offsets, PCMCIA is at 0x1800 */ CLKDEV_INIT("1800", NULL, &clk_cpu), + CLKDEV_INIT(NULL, "OSTIMER0", &clk_36864), }; static int __init sa11xx_clk_init(void) diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index b90c7d828391..3cc2b71e16f0 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -43,7 +43,7 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <asm/mach/irda.h> +#include <linux/platform_data/irda-sa11x0.h> #include <asm/hardware/scoop.h> #include <asm/mach/sharpsl_param.h> @@ -371,8 +371,7 @@ static void __init collie_init(void) PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PWER = _COLLIE_GPIO_AC_IN | _COLLIE_GPIO_CO | _COLLIE_GPIO_ON_KEY | - _COLLIE_GPIO_WAKEUP | _COLLIE_GPIO_nREMOCON_INT | PWER_RTC; + PWER = 0; PGSR = _COLLIE_GPIO_nREMOCON_ON; diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index d4ea142c4edd..40e0d8619a2d 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -33,6 +33,7 @@ #include <mach/irqs.h> #include "generic.h" +#include <clocksource/pxa.h> unsigned int reset_status; EXPORT_SYMBOL(reset_status); @@ -369,6 +370,11 @@ void __init sa1100_map_io(void) iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); } +void __init sa1100_timer_init(void) +{ + pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x90000000), 3686400); +} + /* * Disable the memory bus request/grant signals on the SA1110 to * ensure that we don't receive spurious memory requests. We set diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c index 3c43219bc881..c6b412054a3c 100644 --- a/arch/arm/mach-sa1100/h3100.c +++ b/arch/arm/mach-sa1100/h3100.c @@ -18,7 +18,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/irda.h> +#include <linux/platform_data/irda-sa11x0.h> #include <mach/h3xxx.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 5be54c214c7c..118338efd790 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -18,7 +18,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/irda.h> +#include <linux/platform_data/irda-sa11x0.h> #include <mach/h3xxx.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h index de0983494c7e..734e30e406a3 100644 --- a/arch/arm/mach-sa1100/include/mach/irqs.h +++ b/arch/arm/mach-sa1100/include/mach/irqs.h @@ -8,17 +8,17 @@ * 2001/11/14 RMK Cleaned up and standardised a lot of the IRQs. */ -#define IRQ_GPIO0 1 -#define IRQ_GPIO1 2 -#define IRQ_GPIO2 3 -#define IRQ_GPIO3 4 -#define IRQ_GPIO4 5 -#define IRQ_GPIO5 6 -#define IRQ_GPIO6 7 -#define IRQ_GPIO7 8 -#define IRQ_GPIO8 9 -#define IRQ_GPIO9 10 -#define IRQ_GPIO10 11 +#define IRQ_GPIO0_SC 1 +#define IRQ_GPIO1_SC 2 +#define IRQ_GPIO2_SC 3 +#define IRQ_GPIO3_SC 4 +#define IRQ_GPIO4_SC 5 +#define IRQ_GPIO5_SC 6 +#define IRQ_GPIO6_SC 7 +#define IRQ_GPIO7_SC 8 +#define IRQ_GPIO8_SC 9 +#define IRQ_GPIO9_SC 10 +#define IRQ_GPIO10_SC 11 #define IRQ_GPIO11_27 12 #define IRQ_LCD 13 /* LCD controller */ #define IRQ_Ser0UDC 14 /* Ser. port 0 UDC */ @@ -41,32 +41,43 @@ #define IRQ_RTC1Hz 31 /* RTC 1 Hz clock */ #define IRQ_RTCAlrm 32 /* RTC Alarm */ -#define IRQ_GPIO11 33 -#define IRQ_GPIO12 34 -#define IRQ_GPIO13 35 -#define IRQ_GPIO14 36 -#define IRQ_GPIO15 37 -#define IRQ_GPIO16 38 -#define IRQ_GPIO17 39 -#define IRQ_GPIO18 40 -#define IRQ_GPIO19 41 -#define IRQ_GPIO20 42 -#define IRQ_GPIO21 43 -#define IRQ_GPIO22 44 -#define IRQ_GPIO23 45 -#define IRQ_GPIO24 46 -#define IRQ_GPIO25 47 -#define IRQ_GPIO26 48 -#define IRQ_GPIO27 49 +#define IRQ_GPIO0 33 +#define IRQ_GPIO1 34 +#define IRQ_GPIO2 35 +#define IRQ_GPIO3 36 +#define IRQ_GPIO4 37 +#define IRQ_GPIO5 38 +#define IRQ_GPIO6 39 +#define IRQ_GPIO7 40 +#define IRQ_GPIO8 41 +#define IRQ_GPIO9 42 +#define IRQ_GPIO10 43 +#define IRQ_GPIO11 44 +#define IRQ_GPIO12 45 +#define IRQ_GPIO13 46 +#define IRQ_GPIO14 47 +#define IRQ_GPIO15 48 +#define IRQ_GPIO16 49 +#define IRQ_GPIO17 50 +#define IRQ_GPIO18 51 +#define IRQ_GPIO19 52 +#define IRQ_GPIO20 53 +#define IRQ_GPIO21 54 +#define IRQ_GPIO22 55 +#define IRQ_GPIO23 56 +#define IRQ_GPIO24 57 +#define IRQ_GPIO25 58 +#define IRQ_GPIO26 59 +#define IRQ_GPIO27 60 /* * The next 16 interrupts are for board specific purposes. Since * the kernel can only run on one machine at a time, we can re-use * these. If you need more, increase IRQ_BOARD_END, but keep it - * within sensible limits. IRQs 49 to 64 are available. + * within sensible limits. IRQs 61 to 76 are available. */ -#define IRQ_BOARD_START 50 -#define IRQ_BOARD_END 66 +#define IRQ_BOARD_START 61 +#define IRQ_BOARD_END 77 /* * Figure out the MAX IRQ number. diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index 63e2901db416..65aebfa66fe5 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -80,170 +80,6 @@ static struct irq_domain_ops sa1100_normal_irqdomain_ops = { static struct irq_domain *sa1100_normal_irqdomain; -/* - * SA1100 GPIO edge detection for IRQs: - * IRQs are generated on Falling-Edge, Rising-Edge, or both. - * Use this instead of directly setting GRER/GFER. - */ -static int GPIO_IRQ_rising_edge; -static int GPIO_IRQ_falling_edge; -static int GPIO_IRQ_mask = (1 << 11) - 1; - -static int sa1100_gpio_type(struct irq_data *d, unsigned int type) -{ - unsigned int mask; - - mask = BIT(d->hwirq); - - if (type == IRQ_TYPE_PROBE) { - if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask) - return 0; - type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; - } - - if (type & IRQ_TYPE_EDGE_RISING) { - GPIO_IRQ_rising_edge |= mask; - } else - GPIO_IRQ_rising_edge &= ~mask; - if (type & IRQ_TYPE_EDGE_FALLING) { - GPIO_IRQ_falling_edge |= mask; - } else - GPIO_IRQ_falling_edge &= ~mask; - - GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask; - GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask; - - return 0; -} - -/* - * GPIO IRQs must be acknowledged. - */ -static void sa1100_gpio_ack(struct irq_data *d) -{ - GEDR = BIT(d->hwirq); -} - -static int sa1100_gpio_wake(struct irq_data *d, unsigned int on) -{ - if (on) - PWER |= BIT(d->hwirq); - else - PWER &= ~BIT(d->hwirq); - return 0; -} - -/* - * This is for IRQs from 0 to 10. - */ -static struct irq_chip sa1100_low_gpio_chip = { - .name = "GPIO-l", - .irq_ack = sa1100_gpio_ack, - .irq_mask = sa1100_mask_irq, - .irq_unmask = sa1100_unmask_irq, - .irq_set_type = sa1100_gpio_type, - .irq_set_wake = sa1100_gpio_wake, -}; - -static int sa1100_low_gpio_irqdomain_map(struct irq_domain *d, - unsigned int irq, irq_hw_number_t hwirq) -{ - irq_set_chip_and_handler(irq, &sa1100_low_gpio_chip, - handle_edge_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - - return 0; -} - -static struct irq_domain_ops sa1100_low_gpio_irqdomain_ops = { - .map = sa1100_low_gpio_irqdomain_map, - .xlate = irq_domain_xlate_onetwocell, -}; - -static struct irq_domain *sa1100_low_gpio_irqdomain; - -/* - * IRQ11 (GPIO11 through 27) handler. We enter here with the - * irq_controller_lock held, and IRQs disabled. Decode the IRQ - * and call the handler. - */ -static void -sa1100_high_gpio_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned int mask; - - mask = GEDR & 0xfffff800; - do { - /* - * clear down all currently active IRQ sources. - * We will be processing them all. - */ - GEDR = mask; - - irq = IRQ_GPIO11; - mask >>= 11; - do { - if (mask & 1) - generic_handle_irq(irq); - mask >>= 1; - irq++; - } while (mask); - - mask = GEDR & 0xfffff800; - } while (mask); -} - -/* - * Like GPIO0 to 10, GPIO11-27 IRQs need to be handled specially. - * In addition, the IRQs are all collected up into one bit in the - * interrupt controller registers. - */ -static void sa1100_high_gpio_mask(struct irq_data *d) -{ - unsigned int mask = BIT(d->hwirq); - - GPIO_IRQ_mask &= ~mask; - - GRER &= ~mask; - GFER &= ~mask; -} - -static void sa1100_high_gpio_unmask(struct irq_data *d) -{ - unsigned int mask = BIT(d->hwirq); - - GPIO_IRQ_mask |= mask; - - GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask; - GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask; -} - -static struct irq_chip sa1100_high_gpio_chip = { - .name = "GPIO-h", - .irq_ack = sa1100_gpio_ack, - .irq_mask = sa1100_high_gpio_mask, - .irq_unmask = sa1100_high_gpio_unmask, - .irq_set_type = sa1100_gpio_type, - .irq_set_wake = sa1100_gpio_wake, -}; - -static int sa1100_high_gpio_irqdomain_map(struct irq_domain *d, - unsigned int irq, irq_hw_number_t hwirq) -{ - irq_set_chip_and_handler(irq, &sa1100_high_gpio_chip, - handle_edge_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - - return 0; -} - -static struct irq_domain_ops sa1100_high_gpio_irqdomain_ops = { - .map = sa1100_high_gpio_irqdomain_map, - .xlate = irq_domain_xlate_onetwocell, -}; - -static struct irq_domain *sa1100_high_gpio_irqdomain; - static struct resource irq_resource = DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs"); @@ -270,17 +106,6 @@ static int sa1100irq_suspend(void) IC_GPIO6|IC_GPIO5|IC_GPIO4|IC_GPIO3|IC_GPIO2| IC_GPIO1|IC_GPIO0); - /* - * Set the appropriate edges for wakeup. - */ - GRER = PWER & GPIO_IRQ_rising_edge; - GFER = PWER & GPIO_IRQ_falling_edge; - - /* - * Clear any pending GPIO interrupts. - */ - GEDR = GEDR; - return 0; } @@ -292,9 +117,6 @@ static void sa1100irq_resume(void) ICCR = st->iccr; ICLR = st->iclr; - GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask; - GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask; - ICMR = st->icmr; } } @@ -325,7 +147,8 @@ sa1100_handle_irq(struct pt_regs *regs) if (mask == 0) break; - handle_IRQ(ffs(mask) - 1 + IRQ_GPIO0, regs); + handle_domain_irq(sa1100_normal_irqdomain, + ffs(mask) - 1, regs); } while (1); } @@ -339,34 +162,16 @@ void __init sa1100_init_irq(void) /* all IRQs are IRQ, not FIQ */ ICLR = 0; - /* clear all GPIO edge detects */ - GFER = 0; - GRER = 0; - GEDR = -1; - /* * Whatever the doc says, this has to be set for the wait-on-irq * instruction to work... on a SA1100 rev 9 at least. */ ICCR = 1; - sa1100_low_gpio_irqdomain = irq_domain_add_legacy(NULL, - 11, IRQ_GPIO0, 0, - &sa1100_low_gpio_irqdomain_ops, NULL); - - sa1100_normal_irqdomain = irq_domain_add_legacy(NULL, - 21, IRQ_GPIO11_27, 11, + sa1100_normal_irqdomain = irq_domain_add_simple(NULL, + 32, IRQ_GPIO0_SC, &sa1100_normal_irqdomain_ops, NULL); - sa1100_high_gpio_irqdomain = irq_domain_add_legacy(NULL, - 17, IRQ_GPIO11, 11, - &sa1100_high_gpio_irqdomain_ops, NULL); - - /* - * Install handler for GPIO 11-27 edge detect interrupts - */ - irq_set_chained_handler(IRQ_GPIO11_27, sa1100_high_gpio_handler); - set_handle_irq(sa1100_handle_irq); sa1100_init_gpio(); diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 169262e3040d..af868d258e66 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -12,6 +12,7 @@ #include <linux/pm.h> #include <linux/serial_core.h> #include <linux/slab.h> +#include <linux/smc91x.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -258,12 +259,17 @@ static int neponset_probe(struct platform_device *dev) 0x02000000, "smc91x-attrib"), { .flags = IORESOURCE_IRQ }, }; + struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_8BIT | SMC91X_IO_SHIFT_2 | SMC91X_NOWAIT, + }; struct platform_device_info smc91x_devinfo = { .parent = &dev->dev, .name = "smc91x", .id = 0, .res = smc91x_resources, .num_res = ARRAY_SIZE(smc91x_resources), + .data = &smc91x_platdata, + .size_data = sizeof(smc91x_platdata), }; int ret, irq; diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c index b704433c529c..d7ae8d50f6d8 100644 --- a/arch/arm/mach-sa1100/pci-nanoengine.c +++ b/arch/arm/mach-sa1100/pci-nanoengine.c @@ -22,7 +22,6 @@ #include <linux/kernel.h> #include <linux/irq.h> #include <linux/pci.h> -#include <linux/spinlock.h> #include <asm/mach/pci.h> #include <asm/mach-types.h> @@ -30,97 +29,20 @@ #include <mach/nanoengine.h> #include <mach/hardware.h> -static DEFINE_SPINLOCK(nano_lock); - -static int nanoengine_get_pci_address(struct pci_bus *bus, - unsigned int devfn, int where, void __iomem **address) +static void __iomem *nanoengine_pci_map_bus(struct pci_bus *bus, + unsigned int devfn, int where) { - int ret = PCIBIOS_DEVICE_NOT_FOUND; - unsigned int busnr = bus->number; + if (bus->number != 0 || (devfn >> 3) != 0) + return NULL; - *address = (void __iomem *)NANO_PCI_CONFIG_SPACE_VIRT + + return (void __iomem *)NANO_PCI_CONFIG_SPACE_VIRT + ((bus->number << 16) | (devfn << 8) | (where & ~3)); - - ret = (busnr > 255 || devfn > 255 || where > 255) ? - PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; - - return ret; -} - -static int nanoengine_read_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *val) -{ - int ret; - void __iomem *address; - unsigned long flags; - u32 v; - - /* nanoEngine PCI bridge does not return -1 for a non-existing - * device. We must fake the answer. We know that the only valid - * device is device zero at bus 0, which is the network chip. */ - if (bus->number != 0 || (devfn >> 3) != 0) { - v = -1; - nanoengine_get_pci_address(bus, devfn, where, &address); - goto exit_function; - } - - spin_lock_irqsave(&nano_lock, flags); - - ret = nanoengine_get_pci_address(bus, devfn, where, &address); - if (ret != PCIBIOS_SUCCESSFUL) - return ret; - v = __raw_readl(address); - - spin_unlock_irqrestore(&nano_lock, flags); - - v >>= ((where & 3) * 8); - v &= (unsigned long)(-1) >> ((4 - size) * 8); - -exit_function: - *val = v; - return PCIBIOS_SUCCESSFUL; -} - -static int nanoengine_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 val) -{ - int ret; - void __iomem *address; - unsigned long flags; - unsigned shift; - u32 v; - - shift = (where & 3) * 8; - - spin_lock_irqsave(&nano_lock, flags); - - ret = nanoengine_get_pci_address(bus, devfn, where, &address); - if (ret != PCIBIOS_SUCCESSFUL) - return ret; - v = __raw_readl(address); - switch (size) { - case 1: - v &= ~(0xFF << shift); - v |= val << shift; - break; - case 2: - v &= ~(0xFFFF << shift); - v |= val << shift; - break; - case 4: - v = val; - break; - } - __raw_writel(v, address); - - spin_unlock_irqrestore(&nano_lock, flags); - - return PCIBIOS_SUCCESSFUL; } static struct pci_ops pci_nano_ops = { - .read = nanoengine_read_config, - .write = nanoengine_write_config, + .map_bus = nanoengine_pci_map_bus, + .read = pci_generic_config_read32, + .write = pci_generic_config_write32, }; static int __init pci_nanoengine_map_irq(const struct pci_dev *dev, u8 slot, diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index 091261878eff..1525d7b5f1b7 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -11,6 +11,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/mtd/partitions.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/setup.h> @@ -43,12 +44,18 @@ static struct resource smc91x_resources[] = { #endif }; +static struct smc91x_platdata smc91x_platdata = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, +}; static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, + .dev = { + .platform_data = &smc91x_platdata, + }, }; static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index 6645d1e31f14..34853d5dfda2 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -81,6 +81,7 @@ static int sa11x0_pm_enter(suspend_state_t state) /* * Ensure not to come back here if it wasn't intended */ + RCSR = RCSR_SMR; PSPR = 0; /* diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c deleted file mode 100644 index 1dea6cfafb31..000000000000 --- a/arch/arm/mach-sa1100/time.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * linux/arch/arm/mach-sa1100/time.c - * - * Copyright (C) 1998 Deborah Wallach. - * Twiddles (C) 1999 Hugo Fiennes <hugo@empeg.com> - * - * 2000/03/29 (C) Nicolas Pitre <nico@fluxnic.net> - * Rewritten: big cleanup, much simpler, better HZ accuracy. - * - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/timex.h> -#include <linux/clockchips.h> -#include <linux/sched_clock.h> - -#include <asm/mach/time.h> -#include <mach/hardware.h> -#include <mach/irqs.h> - -#define SA1100_CLOCK_FREQ 3686400 -#define SA1100_LATCH DIV_ROUND_CLOSEST(SA1100_CLOCK_FREQ, HZ) - -static u64 notrace sa1100_read_sched_clock(void) -{ - return readl_relaxed(OSCR); -} - -#define MIN_OSCR_DELTA 2 - -static irqreturn_t sa1100_ost0_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *c = dev_id; - - /* Disarm the compare/match, signal the event. */ - writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER); - writel_relaxed(OSSR_M0, OSSR); - c->event_handler(c); - - return IRQ_HANDLED; -} - -static int -sa1100_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c) -{ - unsigned long next, oscr; - - writel_relaxed(readl_relaxed(OIER) | OIER_E0, OIER); - next = readl_relaxed(OSCR) + delta; - writel_relaxed(next, OSMR0); - oscr = readl_relaxed(OSCR); - - return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0; -} - -static void -sa1100_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c) -{ - switch (mode) { - case CLOCK_EVT_MODE_ONESHOT: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER); - writel_relaxed(OSSR_M0, OSSR); - break; - - case CLOCK_EVT_MODE_RESUME: - case CLOCK_EVT_MODE_PERIODIC: - break; - } -} - -#ifdef CONFIG_PM -unsigned long osmr[4], oier; - -static void sa1100_timer_suspend(struct clock_event_device *cedev) -{ - osmr[0] = readl_relaxed(OSMR0); - osmr[1] = readl_relaxed(OSMR1); - osmr[2] = readl_relaxed(OSMR2); - osmr[3] = readl_relaxed(OSMR3); - oier = readl_relaxed(OIER); -} - -static void sa1100_timer_resume(struct clock_event_device *cedev) -{ - writel_relaxed(0x0f, OSSR); - writel_relaxed(osmr[0], OSMR0); - writel_relaxed(osmr[1], OSMR1); - writel_relaxed(osmr[2], OSMR2); - writel_relaxed(osmr[3], OSMR3); - writel_relaxed(oier, OIER); - - /* - * OSMR0 is the system timer: make sure OSCR is sufficiently behind - */ - writel_relaxed(OSMR0 - SA1100_LATCH, OSCR); -} -#else -#define sa1100_timer_suspend NULL -#define sa1100_timer_resume NULL -#endif - -static struct clock_event_device ckevt_sa1100_osmr0 = { - .name = "osmr0", - .features = CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .set_next_event = sa1100_osmr0_set_next_event, - .set_mode = sa1100_osmr0_set_mode, - .suspend = sa1100_timer_suspend, - .resume = sa1100_timer_resume, -}; - -static struct irqaction sa1100_timer_irq = { - .name = "ost0", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = sa1100_ost0_interrupt, - .dev_id = &ckevt_sa1100_osmr0, -}; - -void __init sa1100_timer_init(void) -{ - writel_relaxed(0, OIER); - writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR); - - sched_clock_register(sa1100_read_sched_clock, 32, 3686400); - - ckevt_sa1100_osmr0.cpumask = cpumask_of(0); - - setup_irq(IRQ_OST0, &sa1100_timer_irq); - - clocksource_mmio_init(OSCR, "oscr", SA1100_CLOCK_FREQ, 200, 32, - clocksource_mmio_readl_up); - clockevents_config_and_register(&ckevt_sa1100_osmr0, 3686400, - MIN_OSCR_DELTA * 2, 0x7fffffff); -} diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 1b4fafe524ff..2f36c85eec4b 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -7,6 +7,7 @@ config PM_RCAR config PM_RMOBILE bool + select PM_GENERIC_DOMAINS config ARCH_RCAR_GEN1 bool @@ -23,7 +24,7 @@ config ARCH_RCAR_GEN2 config ARCH_RMOBILE bool - select PM_RMOBILE if PM && !ARCH_SHMOBILE_MULTI + select PM_RMOBILE if PM select SYS_SUPPORTS_SH_CMT select SYS_SUPPORTS_SH_TMU @@ -51,6 +52,11 @@ config ARCH_R7S72100 bool "RZ/A1H (R7S72100)" select SYS_SUPPORTS_SH_MTU2 +config ARCH_R8A73A4 + bool "R-Mobile APE6 (R8A73A40)" + select ARCH_RMOBILE + select RENESAS_IRQC + config ARCH_R8A7740 bool "R-Mobile A1 (R8A77400)" select ARCH_RMOBILE @@ -74,11 +80,6 @@ config ARCH_R8A7794 comment "Renesas ARM SoCs Board Type" -config MACH_LAGER - bool "Lager board" - depends on ARCH_R8A7790 - select MICREL_PHY if SH_ETH - config MACH_MARZEN bool "MARZEN board" depends on ARCH_R8A7779 @@ -133,14 +134,6 @@ config ARCH_R8A7779 select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_GIC -config ARCH_R8A7790 - bool "R-Car H2 (R8A77900)" - select ARCH_RCAR_GEN2 - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_GIC - select MIGHT_HAVE_PCI - select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE - comment "Renesas ARM SoCs Board Type" config MACH_APE6EVM @@ -208,13 +201,6 @@ config MACH_MARZEN select REGULATOR_FIXED_VOLTAGE if REGULATOR select USE_OF -config MACH_LAGER - bool "Lager board" - depends on ARCH_R8A7790 - select USE_OF - select MICREL_PHY if SH_ETH - select SND_SOC_AK4642 if SND_SIMPLE_CARD - config MACH_KZM9G bool "KZM-A9-GT board" depends on ARCH_SH73A0 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index b55cac0e5b2b..d53996e6da97 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -27,7 +27,6 @@ obj-$(CONFIG_ARCH_R8A73A4) += clock-r8a73a4.o obj-$(CONFIG_ARCH_R8A7740) += clock-r8a7740.o obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o -obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o endif # CPU reset vector handling objects @@ -57,7 +56,6 @@ obj-$(CONFIG_ARCH_SH7372) += entry-intc.o sleep-sh7372.o # Board objects ifdef CONFIG_ARCH_SHMOBILE_MULTI -obj-$(CONFIG_MACH_LAGER) += board-lager-reference.o obj-$(CONFIG_MACH_MARZEN) += board-marzen-reference.o else obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o @@ -66,7 +64,6 @@ obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o obj-$(CONFIG_MACH_BOCKW) += board-bockw.o obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o obj-$(CONFIG_MACH_MARZEN) += board-marzen.o -obj-$(CONFIG_MACH_LAGER) += board-lager.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index 57d00ed6ec0c..02532bea5300 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -7,7 +7,6 @@ loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000 -loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000 loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000 loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000 diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c deleted file mode 100644 index fa06bdba61df..000000000000 --- a/arch/arm/mach-shmobile/board-lager-reference.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Lager board support - Reference DT implementation - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Simon Horman - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/init.h> -#include <linux/of_platform.h> - -#include <asm/mach/arch.h> - -#include "common.h" -#include "r8a7790.h" -#include "rcar-gen2.h" - -static const char *lager_boards_compat_dt[] __initdata = { - "renesas,lager", - "renesas,lager-reference", - NULL, -}; - -DT_MACHINE_START(LAGER_DT, "lager") - .smp = smp_ops(r8a7790_smp_ops), - .init_early = shmobile_init_delay, - .init_time = rcar_gen2_timer_init, - .init_late = shmobile_init_late, - .reserve = rcar_gen2_reserve, - .dt_compat = lager_boards_compat_dt, -MACHINE_END diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c deleted file mode 100644 index 65b128dd4072..000000000000 --- a/arch/arm/mach-shmobile/board-lager.c +++ /dev/null @@ -1,840 +0,0 @@ -/* - * Lager board support - * - * Copyright (C) 2013-2014 Renesas Solutions Corp. - * Copyright (C) 2013 Magnus Damm - * Copyright (C) 2014 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/i2c.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/irqchip.h> -#include <linux/irqchip/arm-gic.h> -#include <linux/kernel.h> -#include <linux/leds.h> -#include <linux/mfd/tmio.h> -#include <linux/mmc/host.h> -#include <linux/mmc/sh_mmcif.h> -#include <linux/mmc/sh_mobile_sdhi.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/mtd.h> -#include <linux/pinctrl/machine.h> -#include <linux/platform_data/camera-rcar.h> -#include <linux/platform_data/gpio-rcar.h> -#include <linux/platform_data/usb-rcar-gen2-phy.h> -#include <linux/platform_device.h> -#include <linux/phy.h> -#include <linux/regulator/driver.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/gpio-regulator.h> -#include <linux/regulator/machine.h> -#include <linux/sh_eth.h> -#include <linux/spi/flash.h> -#include <linux/spi/rspi.h> -#include <linux/spi/spi.h> -#include <linux/usb/phy.h> -#include <linux/usb/renesas_usbhs.h> - -#include <media/soc_camera.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <sound/rcar_snd.h> -#include <sound/simple_card.h> - -#include "common.h" -#include "irqs.h" -#include "r8a7790.h" -#include "rcar-gen2.h" - -/* - * SSI-AK4643 - * - * SW1: 1: AK4643 - * 2: CN22 - * 3: ADV7511 - * - * this command is required when playback. - * - * # amixer set "LINEOUT Mixer DACL" on - */ - -/* - * SDHI0 (CN8) - * - * JP3: pin1 - * SW20: pin1 - - * GP5_24: 1: VDD 3.3V (defult) - * 0: VDD 0.0V - * GP5_29: 1: VccQ 3.3V (defult) - * 0: VccQ 1.8V - * - */ - -/* LEDS */ -static struct gpio_led lager_leds[] = { - { - .name = "led8", - .gpio = RCAR_GP_PIN(5, 17), - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, { - .name = "led7", - .gpio = RCAR_GP_PIN(4, 23), - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, { - .name = "led6", - .gpio = RCAR_GP_PIN(4, 22), - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, -}; - -static const struct gpio_led_platform_data lager_leds_pdata __initconst = { - .leds = lager_leds, - .num_leds = ARRAY_SIZE(lager_leds), -}; - -/* GPIO KEY */ -#define GPIO_KEY(c, g, d, ...) \ - { .code = c, .gpio = g, .desc = d, .active_low = 1, \ - .wakeup = 1, .debounce_interval = 20 } - -static struct gpio_keys_button gpio_buttons[] = { - GPIO_KEY(KEY_4, RCAR_GP_PIN(1, 28), "SW2-pin4"), - GPIO_KEY(KEY_3, RCAR_GP_PIN(1, 26), "SW2-pin3"), - GPIO_KEY(KEY_2, RCAR_GP_PIN(1, 24), "SW2-pin2"), - GPIO_KEY(KEY_1, RCAR_GP_PIN(1, 14), "SW2-pin1"), -}; - -static const struct gpio_keys_platform_data lager_keys_pdata __initconst = { - .buttons = gpio_buttons, - .nbuttons = ARRAY_SIZE(gpio_buttons), -}; - -/* Fixed 3.3V regulator to be used by MMCIF */ -static struct regulator_consumer_supply fixed3v3_power_consumers[] = -{ - REGULATOR_SUPPLY("vmmc", "sh_mmcif.1"), -}; - -/* - * SDHI regulator macro - * - ** FIXME** - * Lager board vqmmc is provided via DA9063 PMIC chip, - * and we should use ${LINK}/drivers/mfd/da9063-* driver for it. - * but, it doesn't have regulator support at this point. - * It uses gpio-regulator for vqmmc as quick-hack. - */ -#define SDHI_REGULATOR(idx, vdd_pin, vccq_pin) \ -static struct regulator_consumer_supply vcc_sdhi##idx##_consumer = \ - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi." #idx); \ - \ -static struct regulator_init_data vcc_sdhi##idx##_init_data = { \ - .constraints = { \ - .valid_ops_mask = REGULATOR_CHANGE_STATUS, \ - }, \ - .consumer_supplies = &vcc_sdhi##idx##_consumer, \ - .num_consumer_supplies = 1, \ -}; \ - \ -static const struct fixed_voltage_config vcc_sdhi##idx##_info __initconst = {\ - .supply_name = "SDHI" #idx "Vcc", \ - .microvolts = 3300000, \ - .gpio = vdd_pin, \ - .enable_high = 1, \ - .init_data = &vcc_sdhi##idx##_init_data, \ -}; \ - \ -static struct regulator_consumer_supply vccq_sdhi##idx##_consumer = \ - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi." #idx); \ - \ -static struct regulator_init_data vccq_sdhi##idx##_init_data = { \ - .constraints = { \ - .input_uV = 3300000, \ - .min_uV = 1800000, \ - .max_uV = 3300000, \ - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | \ - REGULATOR_CHANGE_STATUS, \ - }, \ - .consumer_supplies = &vccq_sdhi##idx##_consumer, \ - .num_consumer_supplies = 1, \ -}; \ - \ -static struct gpio vccq_sdhi##idx##_gpio = \ - { vccq_pin, GPIOF_OUT_INIT_HIGH, "vccq-sdhi" #idx }; \ - \ -static struct gpio_regulator_state vccq_sdhi##idx##_states[] = { \ - { .value = 1800000, .gpios = 0 }, \ - { .value = 3300000, .gpios = 1 }, \ -}; \ - \ -static const struct gpio_regulator_config vccq_sdhi##idx##_info __initconst = {\ - .supply_name = "vqmmc", \ - .gpios = &vccq_sdhi##idx##_gpio, \ - .nr_gpios = 1, \ - .states = vccq_sdhi##idx##_states, \ - .nr_states = ARRAY_SIZE(vccq_sdhi##idx##_states), \ - .type = REGULATOR_VOLTAGE, \ - .init_data = &vccq_sdhi##idx##_init_data, \ -}; - -SDHI_REGULATOR(0, RCAR_GP_PIN(5, 24), RCAR_GP_PIN(5, 29)); -SDHI_REGULATOR(2, RCAR_GP_PIN(5, 25), RCAR_GP_PIN(5, 30)); - -/* MMCIF */ -static const struct sh_mmcif_plat_data mmcif1_pdata __initconst = { - .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, - .clk_ctrl2_present = true, - .ccs_unsupported = true, -}; - -static const struct resource mmcif1_resources[] __initconst = { - DEFINE_RES_MEM(0xee220000, 0x80), - DEFINE_RES_IRQ(gic_spi(170)), -}; - -/* Ether */ -static const struct sh_eth_plat_data ether_pdata __initconst = { - .phy = 0x1, - .phy_irq = irq_pin(0), - .edmac_endian = EDMAC_LITTLE_ENDIAN, - .phy_interface = PHY_INTERFACE_MODE_RMII, - .ether_link_active_low = 1, -}; - -static const struct resource ether_resources[] __initconst = { - DEFINE_RES_MEM(0xee700000, 0x400), - DEFINE_RES_IRQ(gic_spi(162)), -}; - -static const struct platform_device_info ether_info __initconst = { - .name = "r8a7790-ether", - .id = -1, - .res = ether_resources, - .num_res = ARRAY_SIZE(ether_resources), - .data = ðer_pdata, - .size_data = sizeof(ether_pdata), - .dma_mask = DMA_BIT_MASK(32), -}; - -/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64Mb) */ -static struct mtd_partition spi_flash_part[] = { - /* Reserved for user loader program, read-only */ - { - .name = "loader", - .offset = 0, - .size = SZ_256K, - .mask_flags = MTD_WRITEABLE, - }, - /* Reserved for user program, read-only */ - { - .name = "user", - .offset = MTDPART_OFS_APPEND, - .size = SZ_4M, - .mask_flags = MTD_WRITEABLE, - }, - /* All else is writable (e.g. JFFS2) */ - { - .name = "flash", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - }, -}; - -static const struct flash_platform_data spi_flash_data = { - .name = "m25p80", - .parts = spi_flash_part, - .nr_parts = ARRAY_SIZE(spi_flash_part), - .type = "s25fl512s", -}; - -static const struct rspi_plat_data qspi_pdata __initconst = { - .num_chipselect = 1, -}; - -static const struct spi_board_info spi_info[] __initconst = { - { - .modalias = "m25p80", - .platform_data = &spi_flash_data, - .mode = SPI_MODE_0 | SPI_TX_QUAD | SPI_RX_QUAD, - .max_speed_hz = 30000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -/* QSPI resource */ -static const struct resource qspi_resources[] __initconst = { - DEFINE_RES_MEM(0xe6b10000, 0x1000), - DEFINE_RES_IRQ_NAMED(gic_spi(184), "mux"), -}; - -/* VIN */ -static const struct resource vin_resources[] __initconst = { - /* VIN0 */ - DEFINE_RES_MEM(0xe6ef0000, 0x1000), - DEFINE_RES_IRQ(gic_spi(188)), - /* VIN1 */ - DEFINE_RES_MEM(0xe6ef1000, 0x1000), - DEFINE_RES_IRQ(gic_spi(189)), -}; - -static void __init lager_add_vin_device(unsigned idx, - struct rcar_vin_platform_data *pdata) -{ - struct platform_device_info vin_info = { - .name = "r8a7790-vin", - .id = idx, - .res = &vin_resources[idx * 2], - .num_res = 2, - .dma_mask = DMA_BIT_MASK(32), - .data = pdata, - .size_data = sizeof(*pdata), - }; - - BUG_ON(idx > 1); - - platform_device_register_full(&vin_info); -} - -#define LAGER_CAMERA(idx, name, addr, pdata, flag) \ -static struct i2c_board_info i2c_cam##idx##_device = { \ - I2C_BOARD_INFO(name, addr), \ -}; \ - \ -static struct rcar_vin_platform_data vin##idx##_pdata = { \ - .flags = flag, \ -}; \ - \ -static struct soc_camera_link cam##idx##_link = { \ - .bus_id = idx, \ - .board_info = &i2c_cam##idx##_device, \ - .i2c_adapter_id = 2, \ - .module_name = name, \ - .priv = pdata, \ -} - -/* Camera 0 is not currently supported due to adv7612 support missing */ -LAGER_CAMERA(1, "adv7180", 0x20, NULL, RCAR_VIN_BT656); - -static void __init lager_add_camera1_device(void) -{ - platform_device_register_data(NULL, "soc-camera-pdrv", 1, - &cam1_link, sizeof(cam1_link)); - lager_add_vin_device(1, &vin1_pdata); -} - -/* SATA1 */ -static const struct resource sata1_resources[] __initconst = { - DEFINE_RES_MEM(0xee500000, 0x2000), - DEFINE_RES_IRQ(gic_spi(106)), -}; - -static const struct platform_device_info sata1_info __initconst = { - .name = "sata-r8a7790", - .id = 1, - .res = sata1_resources, - .num_res = ARRAY_SIZE(sata1_resources), - .dma_mask = DMA_BIT_MASK(32), -}; - -/* USBHS */ -static const struct resource usbhs_resources[] __initconst = { - DEFINE_RES_MEM(0xe6590000, 0x100), - DEFINE_RES_IRQ(gic_spi(107)), -}; - -struct usbhs_private { - struct renesas_usbhs_platform_info info; - struct usb_phy *phy; -}; - -#define usbhs_get_priv(pdev) \ - container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info) - -static int usbhs_power_ctrl(struct platform_device *pdev, - void __iomem *base, int enable) -{ - struct usbhs_private *priv = usbhs_get_priv(pdev); - - if (!priv->phy) - return -ENODEV; - - if (enable) { - int retval = usb_phy_init(priv->phy); - - if (!retval) - retval = usb_phy_set_suspend(priv->phy, 0); - return retval; - } - - usb_phy_set_suspend(priv->phy, 1); - usb_phy_shutdown(priv->phy); - return 0; -} - -static int usbhs_hardware_init(struct platform_device *pdev) -{ - struct usbhs_private *priv = usbhs_get_priv(pdev); - struct usb_phy *phy; - int ret; - - /* USB0 Function - use PWEN as GPIO input to detect DIP Switch SW5 - * setting to avoid VBUS short circuit due to wrong cable. - * PWEN should be pulled up high if USB Function is selected by SW5 - */ - gpio_request_one(RCAR_GP_PIN(5, 18), GPIOF_IN, NULL); /* USB0_PWEN */ - if (!gpio_get_value(RCAR_GP_PIN(5, 18))) { - pr_warn("Error: USB Function not selected - check SW5 + SW6\n"); - ret = -ENOTSUPP; - goto error; - } - - phy = usb_get_phy_dev(&pdev->dev, 0); - if (IS_ERR(phy)) { - ret = PTR_ERR(phy); - goto error; - } - - priv->phy = phy; - return 0; - error: - gpio_free(RCAR_GP_PIN(5, 18)); - return ret; -} - -static int usbhs_hardware_exit(struct platform_device *pdev) -{ - struct usbhs_private *priv = usbhs_get_priv(pdev); - - if (!priv->phy) - return 0; - - usb_put_phy(priv->phy); - priv->phy = NULL; - - gpio_free(RCAR_GP_PIN(5, 18)); - return 0; -} - -static int usbhs_get_id(struct platform_device *pdev) -{ - return USBHS_GADGET; -} - -static u32 lager_usbhs_pipe_type[] = { - USB_ENDPOINT_XFER_CONTROL, - USB_ENDPOINT_XFER_ISOC, - USB_ENDPOINT_XFER_ISOC, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_INT, - USB_ENDPOINT_XFER_INT, - USB_ENDPOINT_XFER_INT, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, -}; - -static struct usbhs_private usbhs_priv __initdata = { - .info = { - .platform_callback = { - .power_ctrl = usbhs_power_ctrl, - .hardware_init = usbhs_hardware_init, - .hardware_exit = usbhs_hardware_exit, - .get_id = usbhs_get_id, - }, - .driver_param = { - .buswait_bwait = 4, - .pipe_type = lager_usbhs_pipe_type, - .pipe_size = ARRAY_SIZE(lager_usbhs_pipe_type), - }, - } -}; - -static void __init lager_register_usbhs(void) -{ - usb_bind_phy("renesas_usbhs", 0, "usb_phy_rcar_gen2"); - platform_device_register_resndata(NULL, - "renesas_usbhs", -1, - usbhs_resources, - ARRAY_SIZE(usbhs_resources), - &usbhs_priv.info, - sizeof(usbhs_priv.info)); -} - -/* USBHS PHY */ -static const struct rcar_gen2_phy_platform_data usbhs_phy_pdata __initconst = { - .chan0_pci = 0, /* Channel 0 is USBHS */ - .chan2_pci = 1, /* Channel 2 is PCI USB */ -}; - -static const struct resource usbhs_phy_resources[] __initconst = { - DEFINE_RES_MEM(0xe6590100, 0x100), -}; - -/* I2C */ -static struct i2c_board_info i2c2_devices[] = { - { - I2C_BOARD_INFO("ak4643", 0x12), - } -}; - -/* Sound */ -static struct resource rsnd_resources[] __initdata = { - [RSND_GEN2_SCU] = DEFINE_RES_MEM(0xec500000, 0x1000), - [RSND_GEN2_ADG] = DEFINE_RES_MEM(0xec5a0000, 0x100), - [RSND_GEN2_SSIU] = DEFINE_RES_MEM(0xec540000, 0x1000), - [RSND_GEN2_SSI] = DEFINE_RES_MEM(0xec541000, 0x1280), -}; - -static struct rsnd_ssi_platform_info rsnd_ssi[] = { - RSND_SSI(0, gic_spi(370), 0), - RSND_SSI(0, gic_spi(371), RSND_SSI_CLK_PIN_SHARE), -}; - -static struct rsnd_src_platform_info rsnd_src[2] = { - /* no member at this point */ -}; - -static struct rsnd_dai_platform_info rsnd_dai = { - .playback = { .ssi = &rsnd_ssi[0], }, - .capture = { .ssi = &rsnd_ssi[1], }, -}; - -static struct rcar_snd_info rsnd_info = { - .flags = RSND_GEN2, - .ssi_info = rsnd_ssi, - .ssi_info_nr = ARRAY_SIZE(rsnd_ssi), - .src_info = rsnd_src, - .src_info_nr = ARRAY_SIZE(rsnd_src), - .dai_info = &rsnd_dai, - .dai_info_nr = 1, -}; - -static struct asoc_simple_card_info rsnd_card_info = { - .name = "AK4643", - .card = "SSI01-AK4643", - .codec = "ak4642-codec.2-0012", - .platform = "rcar_sound", - .daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM, - .cpu_dai = { - .name = "rcar_sound", - }, - .codec_dai = { - .name = "ak4642-hifi", - .sysclk = 11289600, - }, -}; - -static void __init lager_add_rsnd_device(void) -{ - struct platform_device_info cardinfo = { - .name = "asoc-simple-card", - .id = -1, - .data = &rsnd_card_info, - .size_data = sizeof(struct asoc_simple_card_info), - .dma_mask = DMA_BIT_MASK(32), - }; - - i2c_register_board_info(2, i2c2_devices, - ARRAY_SIZE(i2c2_devices)); - - platform_device_register_resndata( - NULL, "rcar_sound", -1, - rsnd_resources, ARRAY_SIZE(rsnd_resources), - &rsnd_info, sizeof(rsnd_info)); - - platform_device_register_full(&cardinfo); -} - -/* SDHI0 */ -static struct sh_mobile_sdhi_info sdhi0_info __initdata = { - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | - MMC_CAP_POWER_OFF_CARD, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | - TMIO_MMC_WRPROTECT_DISABLE, -}; - -static struct resource sdhi0_resources[] __initdata = { - DEFINE_RES_MEM(0xee100000, 0x200), - DEFINE_RES_IRQ(gic_spi(165)), -}; - -/* SDHI2 */ -static struct sh_mobile_sdhi_info sdhi2_info __initdata = { - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | - MMC_CAP_POWER_OFF_CARD, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | - TMIO_MMC_WRPROTECT_DISABLE, -}; - -static struct resource sdhi2_resources[] __initdata = { - DEFINE_RES_MEM(0xee140000, 0x100), - DEFINE_RES_IRQ(gic_spi(167)), -}; - -/* Internal PCI1 */ -static const struct resource pci1_resources[] __initconst = { - DEFINE_RES_MEM(0xee0b0000, 0x10000), /* CFG */ - DEFINE_RES_MEM(0xee0a0000, 0x10000), /* MEM */ - DEFINE_RES_IRQ(gic_spi(112)), -}; - -static const struct platform_device_info pci1_info __initconst = { - .name = "pci-rcar-gen2", - .id = 1, - .res = pci1_resources, - .num_res = ARRAY_SIZE(pci1_resources), - .dma_mask = DMA_BIT_MASK(32), -}; - -static void __init lager_add_usb1_device(void) -{ - platform_device_register_full(&pci1_info); -} - -/* Internal PCI2 */ -static const struct resource pci2_resources[] __initconst = { - DEFINE_RES_MEM(0xee0d0000, 0x10000), /* CFG */ - DEFINE_RES_MEM(0xee0c0000, 0x10000), /* MEM */ - DEFINE_RES_IRQ(gic_spi(113)), -}; - -static const struct platform_device_info pci2_info __initconst = { - .name = "pci-rcar-gen2", - .id = 2, - .res = pci2_resources, - .num_res = ARRAY_SIZE(pci2_resources), - .dma_mask = DMA_BIT_MASK(32), -}; - -static void __init lager_add_usb2_device(void) -{ - platform_device_register_full(&pci2_info); -} - -static const struct pinctrl_map lager_pinctrl_map[] = { - /* DU (CN10: ARGB0, CN13: LVDS) */ - PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790", - "du_rgb666", "du"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790", - "du_sync_1", "du"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790", - "du_clk_out_0", "du"), - /* I2C2 */ - PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar.2", "pfc-r8a7790", - "i2c2", "i2c2"), - /* QSPI */ - PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7790", - "qspi_ctrl", "qspi"), - PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7790", - "qspi_data4", "qspi"), - /* SCIF0 (CN19: DEBUG SERIAL0) */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790", - "scif0_data", "scif0"), - /* SCIF1 (CN20: DEBUG SERIAL1) */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790", - "scif1_data", "scif1"), - /* SDHI0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790", - "sdhi0_data4", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790", - "sdhi0_ctrl", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790", - "sdhi0_cd", "sdhi0"), - /* SDHI2 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790", - "sdhi2_data4", "sdhi2"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790", - "sdhi2_ctrl", "sdhi2"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790", - "sdhi2_cd", "sdhi2"), - /* SSI (CN17: sound) */ - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790", - "ssi0129_ctrl", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790", - "ssi0_data", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790", - "ssi1_data", "ssi"), - PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790", - "audio_clk_a", "audio_clk"), - /* MMCIF1 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790", - "mmc1_data8", "mmc1"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790", - "mmc1_ctrl", "mmc1"), - /* Ether */ - PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790", - "eth_link", "eth"), - PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790", - "eth_mdio", "eth"), - PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790", - "eth_rmii", "eth"), - PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790", - "intc_irq0", "intc"), - /* VIN0 */ - PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790", - "vin0_data24", "vin0"), - PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790", - "vin0_sync", "vin0"), - PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790", - "vin0_field", "vin0"), - PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790", - "vin0_clkenb", "vin0"), - PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790", - "vin0_clk", "vin0"), - /* VIN1 */ - PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.1", "pfc-r8a7790", - "vin1_data8", "vin1"), - PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.1", "pfc-r8a7790", - "vin1_clk", "vin1"), - /* USB0 */ - PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7790", - "usb0_ovc_vbus", "usb0"), - /* USB1 */ - PIN_MAP_MUX_GROUP_DEFAULT("pci-rcar-gen2.1", "pfc-r8a7790", - "usb1", "usb1"), - /* USB2 */ - PIN_MAP_MUX_GROUP_DEFAULT("pci-rcar-gen2.2", "pfc-r8a7790", - "usb2", "usb2"), -}; - -static void __init lager_add_standard_devices(void) -{ - int fixed_regulator_idx = 0; - int gpio_regulator_idx = 0; - - r8a7790_clock_init(); - - pinctrl_register_mappings(lager_pinctrl_map, - ARRAY_SIZE(lager_pinctrl_map)); - r8a7790_pinmux_init(); - - r8a7790_add_standard_devices(); - platform_device_register_data(NULL, "leds-gpio", -1, - &lager_leds_pdata, - sizeof(lager_leds_pdata)); - platform_device_register_data(NULL, "gpio-keys", -1, - &lager_keys_pdata, - sizeof(lager_keys_pdata)); - regulator_register_always_on(fixed_regulator_idx++, - "fixed-3.3V", fixed3v3_power_consumers, - ARRAY_SIZE(fixed3v3_power_consumers), 3300000); - platform_device_register_resndata(NULL, "sh_mmcif", 1, - mmcif1_resources, ARRAY_SIZE(mmcif1_resources), - &mmcif1_pdata, sizeof(mmcif1_pdata)); - - platform_device_register_full(ðer_info); - - platform_device_register_resndata(NULL, "qspi", 0, - qspi_resources, - ARRAY_SIZE(qspi_resources), - &qspi_pdata, sizeof(qspi_pdata)); - spi_register_board_info(spi_info, ARRAY_SIZE(spi_info)); - - platform_device_register_data(NULL, "reg-fixed-voltage", fixed_regulator_idx++, - &vcc_sdhi0_info, sizeof(struct fixed_voltage_config)); - platform_device_register_data(NULL, "reg-fixed-voltage", fixed_regulator_idx++, - &vcc_sdhi2_info, sizeof(struct fixed_voltage_config)); - - platform_device_register_data(NULL, "gpio-regulator", gpio_regulator_idx++, - &vccq_sdhi0_info, sizeof(struct gpio_regulator_config)); - platform_device_register_data(NULL, "gpio-regulator", gpio_regulator_idx++, - &vccq_sdhi2_info, sizeof(struct gpio_regulator_config)); - - lager_add_camera1_device(); - - platform_device_register_full(&sata1_info); - - platform_device_register_resndata(NULL, "usb_phy_rcar_gen2", - -1, usbhs_phy_resources, - ARRAY_SIZE(usbhs_phy_resources), - &usbhs_phy_pdata, - sizeof(usbhs_phy_pdata)); - lager_register_usbhs(); - lager_add_usb1_device(); - lager_add_usb2_device(); - - lager_add_rsnd_device(); - - platform_device_register_resndata(NULL, "sh_mobile_sdhi", 0, - sdhi0_resources, ARRAY_SIZE(sdhi0_resources), - &sdhi0_info, sizeof(struct sh_mobile_sdhi_info)); - platform_device_register_resndata(NULL, "sh_mobile_sdhi", 2, - sdhi2_resources, ARRAY_SIZE(sdhi2_resources), - &sdhi2_info, sizeof(struct sh_mobile_sdhi_info)); -} - -/* - * Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds - * to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits - * 14-15. We have to set them back to 01 from the default 00 value each time - * the PHY is reset. It's also important because the PHY's LED0 signal is - * connected to SoC's ETH_LINK signal and in the PHY's default mode it will - * bounce on and off after each packet, which we apparently want to avoid. - */ -static int lager_ksz8041_fixup(struct phy_device *phydev) -{ - u16 phyctrl1 = phy_read(phydev, 0x1e); - - phyctrl1 &= ~0xc000; - phyctrl1 |= 0x4000; - return phy_write(phydev, 0x1e, phyctrl1); -} - -static void __init lager_init(void) -{ - lager_add_standard_devices(); - - irq_set_irq_type(irq_pin(0), IRQ_TYPE_LEVEL_LOW); - - if (IS_ENABLED(CONFIG_PHYLIB)) - phy_register_fixup_for_id("r8a7790-ether-ff:01", - lager_ksz8041_fixup); -} - -static void __init lager_legacy_init_irq(void) -{ - void __iomem *gic_dist_base = ioremap_nocache(0xf1001000, 0x1000); - void __iomem *gic_cpu_base = ioremap_nocache(0xf1002000, 0x1000); - - gic_init(0, 29, gic_dist_base, gic_cpu_base); - - /* Do not invoke DT-based interrupt code via irqchip_init() */ -} - -static const char * const lager_boards_compat_dt[] __initconst = { - "renesas,lager", - NULL, -}; - -DT_MACHINE_START(LAGER_DT, "lager") - .smp = smp_ops(r8a7790_smp_ops), - .init_early = shmobile_init_delay, - .init_irq = lager_legacy_init_irq, - .init_time = rcar_gen2_timer_init, - .init_machine = lager_init, - .init_late = shmobile_init_late, - .reserve = rcar_gen2_reserve, - .dt_compat = lager_boards_compat_dt, -MACHINE_END diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c deleted file mode 100644 index f9bbc5f0a9a1..000000000000 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ /dev/null @@ -1,459 +0,0 @@ -/* - * r8a7790 clock framework support - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/init.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/sh_clk.h> -#include <linux/clkdev.h> - -#include "clock.h" -#include "common.h" -#include "r8a7790.h" -#include "rcar-gen2.h" - -/* - * MD EXTAL PLL0 PLL1 PLL3 - * 14 13 19 (MHz) *1 *1 - *--------------------------------------------------- - * 0 0 0 15 x 1 x172/2 x208/2 x106 - * 0 0 1 15 x 1 x172/2 x208/2 x88 - * 0 1 0 20 x 1 x130/2 x156/2 x80 - * 0 1 1 20 x 1 x130/2 x156/2 x66 - * 1 0 0 26 / 2 x200/2 x240/2 x122 - * 1 0 1 26 / 2 x200/2 x240/2 x102 - * 1 1 0 30 / 2 x172/2 x208/2 x106 - * 1 1 1 30 / 2 x172/2 x208/2 x88 - * - * *1 : Table 7.6 indicates VCO ouput (PLLx = VCO/2) - * see "p1 / 2" on R8A7790_CLOCK_ROOT() below - */ - -#define CPG_BASE 0xe6150000 -#define CPG_LEN 0x1000 - -#define SMSTPCR1 0xe6150134 -#define SMSTPCR2 0xe6150138 -#define SMSTPCR3 0xe615013c -#define SMSTPCR5 0xe6150144 -#define SMSTPCR7 0xe615014c -#define SMSTPCR8 0xe6150990 -#define SMSTPCR9 0xe6150994 -#define SMSTPCR10 0xe6150998 - -#define MSTPSR1 IOMEM(0xe6150038) -#define MSTPSR2 IOMEM(0xe6150040) -#define MSTPSR3 IOMEM(0xe6150048) -#define MSTPSR5 IOMEM(0xe615003c) -#define MSTPSR7 IOMEM(0xe61501c4) -#define MSTPSR8 IOMEM(0xe61509a0) -#define MSTPSR9 IOMEM(0xe61509a4) -#define MSTPSR10 IOMEM(0xe61509a8) - -#define SDCKCR 0xE6150074 -#define SD2CKCR 0xE6150078 -#define SD3CKCR 0xE615026C -#define MMC0CKCR 0xE6150240 -#define MMC1CKCR 0xE6150244 -#define SSPCKCR 0xE6150248 -#define SSPRSCKCR 0xE615024C - -static struct clk_mapping cpg_mapping = { - .phys = CPG_BASE, - .len = CPG_LEN, -}; - -static struct clk extal_clk = { - /* .rate will be updated on r8a7790_clock_init() */ - .mapping = &cpg_mapping, -}; - -static struct sh_clk_ops followparent_clk_ops = { - .recalc = followparent_recalc, -}; - -static struct clk main_clk = { - /* .parent will be set r8a7790_clock_init */ - .ops = &followparent_clk_ops, -}; - -static struct clk audio_clk_a = { -}; - -static struct clk audio_clk_b = { -}; - -static struct clk audio_clk_c = { -}; - -/* - * clock ratio of these clock will be updated - * on r8a7790_clock_init() - */ -SH_FIXED_RATIO_CLK_SET(pll1_clk, main_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(pll3_clk, main_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(lb_clk, pll1_clk, 1, 1); -SH_FIXED_RATIO_CLK_SET(qspi_clk, pll1_clk, 1, 1); - -/* fixed ratio clock */ -SH_FIXED_RATIO_CLK_SET(extal_div2_clk, extal_clk, 1, 2); -SH_FIXED_RATIO_CLK_SET(cp_clk, extal_clk, 1, 2); - -SH_FIXED_RATIO_CLK_SET(pll1_div2_clk, pll1_clk, 1, 2); -SH_FIXED_RATIO_CLK_SET(zg_clk, pll1_clk, 1, 3); -SH_FIXED_RATIO_CLK_SET(zx_clk, pll1_clk, 1, 3); -SH_FIXED_RATIO_CLK_SET(zs_clk, pll1_clk, 1, 6); -SH_FIXED_RATIO_CLK_SET(hp_clk, pll1_clk, 1, 12); -SH_FIXED_RATIO_CLK_SET(i_clk, pll1_clk, 1, 2); -SH_FIXED_RATIO_CLK_SET(b_clk, pll1_clk, 1, 12); -SH_FIXED_RATIO_CLK_SET(p_clk, pll1_clk, 1, 24); -SH_FIXED_RATIO_CLK_SET(cl_clk, pll1_clk, 1, 48); -SH_FIXED_RATIO_CLK_SET(m2_clk, pll1_clk, 1, 8); -SH_FIXED_RATIO_CLK_SET(imp_clk, pll1_clk, 1, 4); -SH_FIXED_RATIO_CLK_SET(rclk_clk, pll1_clk, 1, (48 * 1024)); -SH_FIXED_RATIO_CLK_SET(oscclk_clk, pll1_clk, 1, (12 * 1024)); - -SH_FIXED_RATIO_CLK_SET(zb3_clk, pll3_clk, 1, 4); -SH_FIXED_RATIO_CLK_SET(zb3d2_clk, pll3_clk, 1, 8); -SH_FIXED_RATIO_CLK_SET(ddr_clk, pll3_clk, 1, 8); -SH_FIXED_RATIO_CLK_SET(mp_clk, pll1_div2_clk, 1, 15); - -static struct clk *main_clks[] = { - &audio_clk_a, - &audio_clk_b, - &audio_clk_c, - &extal_clk, - &extal_div2_clk, - &main_clk, - &pll1_clk, - &pll1_div2_clk, - &pll3_clk, - &lb_clk, - &qspi_clk, - &zg_clk, - &zx_clk, - &zs_clk, - &hp_clk, - &i_clk, - &b_clk, - &p_clk, - &cl_clk, - &m2_clk, - &imp_clk, - &rclk_clk, - &oscclk_clk, - &zb3_clk, - &zb3d2_clk, - &ddr_clk, - &mp_clk, - &cp_clk, -}; - -/* SDHI (DIV4) clock */ -static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10 }; - -static struct clk_div_mult_table div4_div_mult_table = { - .divisors = divisors, - .nr_divisors = ARRAY_SIZE(divisors), -}; - -static struct clk_div4_table div4_table = { - .div_mult_table = &div4_div_mult_table, -}; - -enum { - DIV4_SDH, DIV4_SD0, DIV4_SD1, DIV4_NR -}; - -static struct clk div4_clks[DIV4_NR] = { - [DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT), - [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1df0, CLK_ENABLE_ON_INIT), - [DIV4_SD1] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 0, 0x1df0, CLK_ENABLE_ON_INIT), -}; - -/* DIV6 clocks */ -enum { - DIV6_SD2, DIV6_SD3, - DIV6_MMC0, DIV6_MMC1, - DIV6_SSP, DIV6_SSPRS, - DIV6_NR -}; - -static struct clk div6_clks[DIV6_NR] = { - [DIV6_SD2] = SH_CLK_DIV6(&pll1_div2_clk, SD2CKCR, 0), - [DIV6_SD3] = SH_CLK_DIV6(&pll1_div2_clk, SD3CKCR, 0), - [DIV6_MMC0] = SH_CLK_DIV6(&pll1_div2_clk, MMC0CKCR, 0), - [DIV6_MMC1] = SH_CLK_DIV6(&pll1_div2_clk, MMC1CKCR, 0), - [DIV6_SSP] = SH_CLK_DIV6(&pll1_div2_clk, SSPCKCR, 0), - [DIV6_SSPRS] = SH_CLK_DIV6(&pll1_div2_clk, SSPRSCKCR, 0), -}; - -/* MSTP */ -enum { - MSTP1017, /* parent of SCU */ - - MSTP1031, MSTP1030, - MSTP1029, MSTP1028, MSTP1027, MSTP1026, MSTP1025, MSTP1024, MSTP1023, MSTP1022, - MSTP1015, MSTP1014, MSTP1013, MSTP1012, MSTP1011, MSTP1010, - MSTP1009, MSTP1008, MSTP1007, MSTP1006, MSTP1005, - MSTP931, MSTP930, MSTP929, MSTP928, - MSTP917, - MSTP815, MSTP814, - MSTP813, - MSTP811, MSTP810, MSTP809, MSTP808, - MSTP726, MSTP725, MSTP724, MSTP723, MSTP722, MSTP721, MSTP720, - MSTP717, MSTP716, - MSTP704, MSTP703, - MSTP522, - MSTP502, MSTP501, - MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304, - MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, - MSTP124, - MSTP_NR -}; - -static struct clk mstp_clks[MSTP_NR] = { - [MSTP1031] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 31, MSTPSR10, 0), /* SCU0 */ - [MSTP1030] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 30, MSTPSR10, 0), /* SCU1 */ - [MSTP1029] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 29, MSTPSR10, 0), /* SCU2 */ - [MSTP1028] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 28, MSTPSR10, 0), /* SCU3 */ - [MSTP1027] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 27, MSTPSR10, 0), /* SCU4 */ - [MSTP1026] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 26, MSTPSR10, 0), /* SCU5 */ - [MSTP1025] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 25, MSTPSR10, 0), /* SCU6 */ - [MSTP1024] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 24, MSTPSR10, 0), /* SCU7 */ - [MSTP1023] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 23, MSTPSR10, 0), /* SCU8 */ - [MSTP1022] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 22, MSTPSR10, 0), /* SCU9 */ - [MSTP1017] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 17, MSTPSR10, 0), /* SCU */ - [MSTP1015] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 15, MSTPSR10, 0), /* SSI0 */ - [MSTP1014] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 14, MSTPSR10, 0), /* SSI1 */ - [MSTP1013] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 13, MSTPSR10, 0), /* SSI2 */ - [MSTP1012] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 12, MSTPSR10, 0), /* SSI3 */ - [MSTP1011] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 11, MSTPSR10, 0), /* SSI4 */ - [MSTP1010] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 10, MSTPSR10, 0), /* SSI5 */ - [MSTP1009] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 9, MSTPSR10, 0), /* SSI6 */ - [MSTP1008] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 8, MSTPSR10, 0), /* SSI7 */ - [MSTP1007] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 7, MSTPSR10, 0), /* SSI8 */ - [MSTP1006] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 6, MSTPSR10, 0), /* SSI9 */ - [MSTP1005] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 5, MSTPSR10, 0), /* SSI ALL */ - [MSTP931] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */ - [MSTP930] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */ - [MSTP929] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */ - [MSTP928] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */ - [MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */ - [MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */ - [MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */ - [MSTP813] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR8, 13, MSTPSR8, 0), /* Ether */ - [MSTP811] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 11, MSTPSR8, 0), /* VIN0 */ - [MSTP810] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 10, MSTPSR8, 0), /* VIN1 */ - [MSTP809] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 9, MSTPSR8, 0), /* VIN2 */ - [MSTP808] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 8, MSTPSR8, 0), /* VIN3 */ - [MSTP726] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 26, MSTPSR7, 0), /* LVDS0 */ - [MSTP725] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 25, MSTPSR7, 0), /* LVDS1 */ - [MSTP724] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 24, MSTPSR7, 0), /* DU0 */ - [MSTP723] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 23, MSTPSR7, 0), /* DU1 */ - [MSTP722] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 22, MSTPSR7, 0), /* DU2 */ - [MSTP721] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 21, MSTPSR7, 0), /* SCIF0 */ - [MSTP720] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 20, MSTPSR7, 0), /* SCIF1 */ - [MSTP717] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR7, 17, MSTPSR7, 0), /* HSCIF0 */ - [MSTP716] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR7, 16, MSTPSR7, 0), /* HSCIF1 */ - [MSTP704] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR7, 4, MSTPSR7, 0), /* HSUSB */ - [MSTP703] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR7, 3, MSTPSR7, 0), /* EHCI */ - [MSTP522] = SH_CLK_MSTP32_STS(&extal_clk, SMSTPCR5, 22, MSTPSR5, 0), /* Thermal */ - [MSTP502] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR5, 2, MSTPSR5, 0), /* Audio-DMAC low */ - [MSTP501] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR5, 1, MSTPSR5, 0), /* Audio-DMAC hi */ - [MSTP315] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_MMC0], SMSTPCR3, 15, MSTPSR3, 0), /* MMC0 */ - [MSTP314] = SH_CLK_MSTP32_STS(&div4_clks[DIV4_SD0], SMSTPCR3, 14, MSTPSR3, 0), /* SDHI0 */ - [MSTP313] = SH_CLK_MSTP32_STS(&div4_clks[DIV4_SD1], SMSTPCR3, 13, MSTPSR3, 0), /* SDHI1 */ - [MSTP312] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_SD2], SMSTPCR3, 12, MSTPSR3, 0), /* SDHI2 */ - [MSTP311] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_SD3], SMSTPCR3, 11, MSTPSR3, 0), /* SDHI3 */ - [MSTP305] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_MMC1], SMSTPCR3, 5, MSTPSR3, 0), /* MMC1 */ - [MSTP304] = SH_CLK_MSTP32_STS(&cp_clk, SMSTPCR3, 4, MSTPSR3, 0), /* TPU0 */ - [MSTP216] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 16, MSTPSR2, 0), /* SCIFB2 */ - [MSTP207] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 7, MSTPSR2, 0), /* SCIFB1 */ - [MSTP206] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 6, MSTPSR2, 0), /* SCIFB0 */ - [MSTP204] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 4, MSTPSR2, 0), /* SCIFA0 */ - [MSTP203] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 3, MSTPSR2, 0), /* SCIFA1 */ - [MSTP202] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 2, MSTPSR2, 0), /* SCIFA2 */ - [MSTP124] = SH_CLK_MSTP32_STS(&rclk_clk, SMSTPCR1, 24, MSTPSR1, 0), /* CMT0 */ -}; - -static struct clk_lookup lookups[] = { - - /* main clocks */ - CLKDEV_CON_ID("extal", &extal_clk), - CLKDEV_CON_ID("extal_div2", &extal_div2_clk), - CLKDEV_CON_ID("main", &main_clk), - CLKDEV_CON_ID("pll1", &pll1_clk), - CLKDEV_CON_ID("pll1_div2", &pll1_div2_clk), - CLKDEV_CON_ID("pll3", &pll3_clk), - CLKDEV_CON_ID("zg", &zg_clk), - CLKDEV_CON_ID("zx", &zx_clk), - CLKDEV_CON_ID("zs", &zs_clk), - CLKDEV_CON_ID("hp", &hp_clk), - CLKDEV_CON_ID("i", &i_clk), - CLKDEV_CON_ID("b", &b_clk), - CLKDEV_CON_ID("lb", &lb_clk), - CLKDEV_CON_ID("p", &p_clk), - CLKDEV_CON_ID("cl", &cl_clk), - CLKDEV_CON_ID("m2", &m2_clk), - CLKDEV_CON_ID("imp", &imp_clk), - CLKDEV_CON_ID("rclk", &rclk_clk), - CLKDEV_CON_ID("oscclk", &oscclk_clk), - CLKDEV_CON_ID("zb3", &zb3_clk), - CLKDEV_CON_ID("zb3d2", &zb3d2_clk), - CLKDEV_CON_ID("ddr", &ddr_clk), - CLKDEV_CON_ID("mp", &mp_clk), - CLKDEV_CON_ID("qspi", &qspi_clk), - CLKDEV_CON_ID("cp", &cp_clk), - - /* DIV4 */ - CLKDEV_CON_ID("sdh", &div4_clks[DIV4_SDH]), - - /* DIV6 */ - CLKDEV_CON_ID("ssp", &div6_clks[DIV6_SSP]), - CLKDEV_CON_ID("ssprs", &div6_clks[DIV6_SSPRS]), - - /* MSTP */ - CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP1005]), - CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), - CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), - CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), - CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]), - CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), - CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]), - CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]), - CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]), - CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]), - CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]), - CLKDEV_DEV_ID("i2c-rcar_gen2.0", &mstp_clks[MSTP931]), - CLKDEV_DEV_ID("i2c-rcar_gen2.1", &mstp_clks[MSTP930]), - CLKDEV_DEV_ID("i2c-rcar_gen2.2", &mstp_clks[MSTP929]), - CLKDEV_DEV_ID("i2c-rcar_gen2.3", &mstp_clks[MSTP928]), - CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]), - CLKDEV_DEV_ID("r8a7790-vin.0", &mstp_clks[MSTP811]), - CLKDEV_DEV_ID("r8a7790-vin.1", &mstp_clks[MSTP810]), - CLKDEV_DEV_ID("r8a7790-vin.2", &mstp_clks[MSTP809]), - CLKDEV_DEV_ID("r8a7790-vin.3", &mstp_clks[MSTP808]), - CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), - CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP502]), - CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP501]), - CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]), - CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), - CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), - CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]), - CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]), - CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]), - CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]), - CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP704]), - CLKDEV_DEV_ID("pci-rcar-gen2.0", &mstp_clks[MSTP703]), - CLKDEV_DEV_ID("pci-rcar-gen2.1", &mstp_clks[MSTP703]), - CLKDEV_DEV_ID("pci-rcar-gen2.2", &mstp_clks[MSTP703]), - CLKDEV_DEV_ID("sata-r8a7790.0", &mstp_clks[MSTP815]), - CLKDEV_DEV_ID("sata-r8a7790.1", &mstp_clks[MSTP814]), - - /* ICK */ - CLKDEV_ICK_ID("fck", "sh-cmt-48-gen2.0", &mstp_clks[MSTP124]), - CLKDEV_ICK_ID("usbhs", "usb_phy_rcar_gen2", &mstp_clks[MSTP704]), - CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7790", &mstp_clks[MSTP726]), - CLKDEV_ICK_ID("lvds.1", "rcar-du-r8a7790", &mstp_clks[MSTP725]), - CLKDEV_ICK_ID("du.0", "rcar-du-r8a7790", &mstp_clks[MSTP724]), - CLKDEV_ICK_ID("du.1", "rcar-du-r8a7790", &mstp_clks[MSTP723]), - CLKDEV_ICK_ID("du.2", "rcar-du-r8a7790", &mstp_clks[MSTP722]), - CLKDEV_ICK_ID("clk_a", "rcar_sound", &audio_clk_a), - CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b), - CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c), - CLKDEV_ICK_ID("clk_i", "rcar_sound", &m2_clk), - CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP1031]), - CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP1030]), - CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP1029]), - CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP1028]), - CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP1027]), - CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP1026]), - CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP1025]), - CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP1024]), - CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP1023]), - CLKDEV_ICK_ID("src.9", "rcar_sound", &mstp_clks[MSTP1022]), - CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP1015]), - CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP1014]), - CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP1013]), - CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP1012]), - CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP1011]), - CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP1010]), - CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP1009]), - CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP1008]), - CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP1007]), - CLKDEV_ICK_ID("ssi.9", "rcar_sound", &mstp_clks[MSTP1006]), - -}; - -#define R8A7790_CLOCK_ROOT(e, m, p0, p1, p30, p31) \ - extal_clk.rate = e * 1000 * 1000; \ - main_clk.parent = m; \ - SH_CLK_SET_RATIO(&pll1_clk_ratio, p1 / 2, 1); \ - if (mode & MD(19)) \ - SH_CLK_SET_RATIO(&pll3_clk_ratio, p31, 1); \ - else \ - SH_CLK_SET_RATIO(&pll3_clk_ratio, p30, 1) - - -void __init r8a7790_clock_init(void) -{ - u32 mode = rcar_gen2_read_mode_pins(); - int k, ret = 0; - - switch (mode & (MD(14) | MD(13))) { - case 0: - R8A7790_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88); - break; - case MD(13): - R8A7790_CLOCK_ROOT(20, &extal_clk, 130, 156, 80, 66); - break; - case MD(14): - R8A7790_CLOCK_ROOT(26 / 2, &extal_div2_clk, 200, 240, 122, 102); - break; - case MD(13) | MD(14): - R8A7790_CLOCK_ROOT(30 / 2, &extal_div2_clk, 172, 208, 106, 88); - break; - } - - if (mode & (MD(18))) - SH_CLK_SET_RATIO(&lb_clk_ratio, 1, 36); - else - SH_CLK_SET_RATIO(&lb_clk_ratio, 1, 24); - - if ((mode & (MD(3) | MD(2) | MD(1))) == MD(2)) - SH_CLK_SET_RATIO(&qspi_clk_ratio, 1, 16); - else - SH_CLK_SET_RATIO(&qspi_clk_ratio, 1, 20); - - for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) - ret = clk_register(main_clks[k]); - - if (!ret) - ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); - - if (!ret) - ret = sh_clk_div6_register(div6_clks, DIV6_NR); - - if (!ret) - ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - if (!ret) - shmobile_clk_init(); - else - panic("failed to setup r8a7790 clocks\n"); -} diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 6b4c1f313cc9..3855fb024fdb 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -553,6 +553,7 @@ enum { MSTP001, MSTP314, MSTP313, MSTP312, MSTP311, MSTP304, MSTP303, MSTP302, MSTP301, MSTP300, MSTP411, MSTP410, MSTP403, + MSTP508, MSTP_NR }; #define MSTP(_parent, _reg, _bit, _flags) \ @@ -597,6 +598,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */ [MSTP410] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */ [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ + [MSTP508] = MSTP(&div4_clks[DIV4_HP], SMSTPCR5, 8, 0), /* INTCA0 */ }; /* The lookups structure below includes duplicate entries for some clocks @@ -677,6 +679,14 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */ CLKDEV_DEV_ID("e6828000.i2c", &mstp_clks[MSTP410]), /* I2C4 */ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ + CLKDEV_DEV_ID("renesas_intc_irqpin.0", &mstp_clks[MSTP508]), /* INTCA0 */ + CLKDEV_DEV_ID("e6900000.irqpin", &mstp_clks[MSTP508]), /* INTCA0 */ + CLKDEV_DEV_ID("renesas_intc_irqpin.1", &mstp_clks[MSTP508]), /* INTCA0 */ + CLKDEV_DEV_ID("e6900004.irqpin", &mstp_clks[MSTP508]), /* INTCA0 */ + CLKDEV_DEV_ID("renesas_intc_irqpin.2", &mstp_clks[MSTP508]), /* INTCA0 */ + CLKDEV_DEV_ID("e6900008.irqpin", &mstp_clks[MSTP508]), /* INTCA0 */ + CLKDEV_DEV_ID("renesas_intc_irqpin.3", &mstp_clks[MSTP508]), /* INTCA0 */ + CLKDEV_DEV_ID("e690000c.irqpin", &mstp_clks[MSTP508]), /* INTCA0 */ /* ICK */ CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]), diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c index ac2eecd6f5ea..34608fcf0648 100644 --- a/arch/arm/mach-shmobile/pm-r8a7740.c +++ b/arch/arm/mach-shmobile/pm-r8a7740.c @@ -9,10 +9,14 @@ * for more details. */ #include <linux/console.h> +#include <linux/io.h> #include <linux/suspend.h> + #include "common.h" #include "pm-rmobile.h" +#define SYSC_BASE IOMEM(0xe6180000) + #if defined(CONFIG_PM) && !defined(CONFIG_ARCH_MULTIPLATFORM) static int r8a7740_pd_a3sm_suspend(void) { @@ -45,41 +49,51 @@ static int r8a7740_pd_d4_suspend(void) static struct rmobile_pm_domain r8a7740_pm_domains[] = { { .genpd.name = "A4LC", + .base = SYSC_BASE, .bit_shift = 1, }, { .genpd.name = "A4MP", + .base = SYSC_BASE, .bit_shift = 2, }, { .genpd.name = "D4", + .base = SYSC_BASE, .bit_shift = 3, .gov = &pm_domain_always_on_gov, .suspend = r8a7740_pd_d4_suspend, }, { .genpd.name = "A4R", + .base = SYSC_BASE, .bit_shift = 5, }, { .genpd.name = "A3RV", + .base = SYSC_BASE, .bit_shift = 6, }, { .genpd.name = "A4S", + .base = SYSC_BASE, .bit_shift = 10, .no_debug = true, }, { .genpd.name = "A3SP", + .base = SYSC_BASE, .bit_shift = 11, .gov = &pm_domain_always_on_gov, .no_debug = true, .suspend = r8a7740_pd_a3sp_suspend, }, { .genpd.name = "A3SM", + .base = SYSC_BASE, .bit_shift = 12, .gov = &pm_domain_always_on_gov, .suspend = r8a7740_pd_a3sm_suspend, }, { .genpd.name = "A3SG", + .base = SYSC_BASE, .bit_shift = 13, }, { .genpd.name = "A4SU", + .base = SYSC_BASE, .bit_shift = 20, }, }; diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c index 6f7d56ecf969..95018209ff0b 100644 --- a/arch/arm/mach-shmobile/pm-rmobile.c +++ b/arch/arm/mach-shmobile/pm-rmobile.c @@ -3,6 +3,7 @@ * * Copyright (C) 2012 Renesas Solutions Corp. * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * Copyright (C) 2014 Glider bvba * * based on pm-sh7372.c * Copyright (C) 2011 Magnus Damm @@ -13,16 +14,22 @@ */ #include <linux/console.h> #include <linux/delay.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/pm_clock.h> +#include <linux/slab.h> + #include <asm/io.h> + #include "pm-rmobile.h" /* SYSC */ -#define SPDCR IOMEM(0xe6180008) -#define SWUCR IOMEM(0xe6180014) -#define PSTR IOMEM(0xe6180080) +#define SPDCR 0x08 /* SYS Power Down Control Register */ +#define SWUCR 0x14 /* SYS Wakeup Control Register */ +#define PSTR 0x80 /* Power Status Register */ #define PSTR_RETRIES 100 #define PSTR_DELAY_US 10 @@ -30,8 +37,12 @@ static int rmobile_pd_power_down(struct generic_pm_domain *genpd) { struct rmobile_pm_domain *rmobile_pd = to_rmobile_pd(genpd); - unsigned int mask = 1 << rmobile_pd->bit_shift; + unsigned int mask; + + if (rmobile_pd->bit_shift == ~0) + return -EBUSY; + mask = 1 << rmobile_pd->bit_shift; if (rmobile_pd->suspend) { int ret = rmobile_pd->suspend(); @@ -39,12 +50,12 @@ static int rmobile_pd_power_down(struct generic_pm_domain *genpd) return ret; } - if (__raw_readl(PSTR) & mask) { + if (__raw_readl(rmobile_pd->base + PSTR) & mask) { unsigned int retry_count; - __raw_writel(mask, SPDCR); + __raw_writel(mask, rmobile_pd->base + SPDCR); for (retry_count = PSTR_RETRIES; retry_count; retry_count--) { - if (!(__raw_readl(SPDCR) & mask)) + if (!(__raw_readl(rmobile_pd->base + SPDCR) & mask)) break; cpu_relax(); } @@ -52,7 +63,8 @@ static int rmobile_pd_power_down(struct generic_pm_domain *genpd) if (!rmobile_pd->no_debug) pr_debug("%s: Power off, 0x%08x -> PSTR = 0x%08x\n", - genpd->name, mask, __raw_readl(PSTR)); + genpd->name, mask, + __raw_readl(rmobile_pd->base + PSTR)); return 0; } @@ -60,17 +72,21 @@ static int rmobile_pd_power_down(struct generic_pm_domain *genpd) static int __rmobile_pd_power_up(struct rmobile_pm_domain *rmobile_pd, bool do_resume) { - unsigned int mask = 1 << rmobile_pd->bit_shift; + unsigned int mask; unsigned int retry_count; int ret = 0; - if (__raw_readl(PSTR) & mask) + if (rmobile_pd->bit_shift == ~0) + return 0; + + mask = 1 << rmobile_pd->bit_shift; + if (__raw_readl(rmobile_pd->base + PSTR) & mask) goto out; - __raw_writel(mask, SWUCR); + __raw_writel(mask, rmobile_pd->base + SWUCR); for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) { - if (!(__raw_readl(SWUCR) & mask)) + if (!(__raw_readl(rmobile_pd->base + SWUCR) & mask)) break; if (retry_count > PSTR_RETRIES) udelay(PSTR_DELAY_US); @@ -82,7 +98,8 @@ static int __rmobile_pd_power_up(struct rmobile_pm_domain *rmobile_pd, if (!rmobile_pd->no_debug) pr_debug("%s: Power on, 0x%08x -> PSTR = 0x%08x\n", - rmobile_pd->genpd.name, mask, __raw_readl(PSTR)); + rmobile_pd->genpd.name, mask, + __raw_readl(rmobile_pd->base + PSTR)); out: if (ret == 0 && rmobile_pd->resume && do_resume) @@ -101,6 +118,36 @@ static bool rmobile_pd_active_wakeup(struct device *dev) return true; } +static int rmobile_pd_attach_dev(struct generic_pm_domain *domain, + struct device *dev) +{ + int error; + + error = pm_clk_create(dev); + if (error) { + dev_err(dev, "pm_clk_create failed %d\n", error); + return error; + } + + error = pm_clk_add(dev, NULL); + if (error) { + dev_err(dev, "pm_clk_add failed %d\n", error); + goto fail; + } + + return 0; + +fail: + pm_clk_destroy(dev); + return error; +} + +static void rmobile_pd_detach_dev(struct generic_pm_domain *domain, + struct device *dev) +{ + pm_clk_destroy(dev); +} + static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd) { struct generic_pm_domain *genpd = &rmobile_pd->genpd; @@ -111,9 +158,13 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd) genpd->dev_ops.active_wakeup = rmobile_pd_active_wakeup; genpd->power_off = rmobile_pd_power_down; genpd->power_on = rmobile_pd_power_up; + genpd->attach_dev = rmobile_pd_attach_dev; + genpd->detach_dev = rmobile_pd_detach_dev; __rmobile_pd_power_up(rmobile_pd, false); } +#ifdef CONFIG_ARCH_SHMOBILE_LEGACY + void rmobile_init_domains(struct rmobile_pm_domain domains[], int num) { int j; @@ -129,8 +180,6 @@ void rmobile_add_device_to_domain_td(const char *domain_name, struct device *dev = &pdev->dev; __pm_genpd_name_add_device(domain_name, dev, td); - if (pm_clk_no_clocks(dev)) - pm_clk_add(dev, NULL); } void rmobile_add_devices_to_domains(struct pm_domain_device data[], @@ -148,3 +197,238 @@ void rmobile_add_devices_to_domains(struct pm_domain_device data[], rmobile_add_device_to_domain_td(data[j].domain_name, data[j].pdev, &latencies); } + +#else /* !CONFIG_ARCH_SHMOBILE_LEGACY */ + +static int rmobile_pd_suspend_busy(void) +{ + /* + * This domain should not be turned off. + */ + return -EBUSY; +} + +static int rmobile_pd_suspend_console(void) +{ + /* + * Serial consoles make use of SCIF hardware located in this domain, + * hence keep the power domain on if "no_console_suspend" is set. + */ + return console_suspend_enabled ? 0 : -EBUSY; +} + +enum pd_types { + PD_NORMAL, + PD_CPU, + PD_CONSOLE, + PD_DEBUG, + PD_MEMCTL, +}; + +#define MAX_NUM_SPECIAL_PDS 16 + +static struct special_pd { + struct device_node *pd; + enum pd_types type; +} special_pds[MAX_NUM_SPECIAL_PDS] __initdata; + +static unsigned int num_special_pds __initdata; + +static const struct of_device_id special_ids[] __initconst = { + { .compatible = "arm,coresight-etm3x", .data = (void *)PD_DEBUG }, + { .compatible = "renesas,dbsc-r8a73a4", .data = (void *)PD_MEMCTL, }, + { .compatible = "renesas,dbsc3-r8a7740", .data = (void *)PD_MEMCTL, }, + { .compatible = "renesas,sbsc-sh73a0", .data = (void *)PD_MEMCTL, }, + { /* sentinel */ }, +}; + +static void __init add_special_pd(struct device_node *np, enum pd_types type) +{ + unsigned int i; + struct device_node *pd; + + pd = of_parse_phandle(np, "power-domains", 0); + if (!pd) + return; + + for (i = 0; i < num_special_pds; i++) + if (pd == special_pds[i].pd && type == special_pds[i].type) { + of_node_put(pd); + return; + } + + if (num_special_pds == ARRAY_SIZE(special_pds)) { + pr_warn("Too many special PM domains\n"); + of_node_put(pd); + return; + } + + pr_debug("Special PM domain %s type %d for %s\n", pd->name, type, + np->full_name); + + special_pds[num_special_pds].pd = pd; + special_pds[num_special_pds].type = type; + num_special_pds++; +} + +static void __init get_special_pds(void) +{ + struct device_node *np; + const struct of_device_id *id; + + /* PM domains containing CPUs */ + for_each_node_by_type(np, "cpu") + add_special_pd(np, PD_CPU); + + /* PM domain containing console */ + if (of_stdout) + add_special_pd(of_stdout, PD_CONSOLE); + + /* PM domains containing other special devices */ + for_each_matching_node_and_match(np, special_ids, &id) + add_special_pd(np, (enum pd_types)id->data); +} + +static void __init put_special_pds(void) +{ + unsigned int i; + + for (i = 0; i < num_special_pds; i++) + of_node_put(special_pds[i].pd); +} + +static enum pd_types __init pd_type(const struct device_node *pd) +{ + unsigned int i; + + for (i = 0; i < num_special_pds; i++) + if (pd == special_pds[i].pd) + return special_pds[i].type; + + return PD_NORMAL; +} + +static void __init rmobile_setup_pm_domain(struct device_node *np, + struct rmobile_pm_domain *pd) +{ + const char *name = pd->genpd.name; + + switch (pd_type(np)) { + case PD_CPU: + /* + * This domain contains the CPU core and therefore it should + * only be turned off if the CPU is not in use. + */ + pr_debug("PM domain %s contains CPU\n", name); + pd->gov = &pm_domain_always_on_gov; + pd->suspend = rmobile_pd_suspend_busy; + break; + + case PD_CONSOLE: + pr_debug("PM domain %s contains serial console\n", name); + pd->gov = &pm_domain_always_on_gov; + pd->suspend = rmobile_pd_suspend_console; + break; + + case PD_DEBUG: + /* + * This domain contains the Coresight-ETM hardware block and + * therefore it should only be turned off if the debug module + * is not in use. + */ + pr_debug("PM domain %s contains Coresight-ETM\n", name); + pd->gov = &pm_domain_always_on_gov; + pd->suspend = rmobile_pd_suspend_busy; + break; + + case PD_MEMCTL: + /* + * This domain contains a memory-controller and therefore it + * should only be turned off if memory is not in use. + */ + pr_debug("PM domain %s contains MEMCTL\n", name); + pd->gov = &pm_domain_always_on_gov; + pd->suspend = rmobile_pd_suspend_busy; + break; + + case PD_NORMAL: + break; + } + + rmobile_init_pm_domain(pd); +} + +static int __init rmobile_add_pm_domains(void __iomem *base, + struct device_node *parent, + struct generic_pm_domain *genpd_parent) +{ + struct device_node *np; + + for_each_child_of_node(parent, np) { + struct rmobile_pm_domain *pd; + u32 idx = ~0; + + if (of_property_read_u32(np, "reg", &idx)) { + /* always-on domain */ + } + + pd = kzalloc(sizeof(*pd), GFP_KERNEL); + if (!pd) + return -ENOMEM; + + pd->genpd.name = np->name; + pd->base = base; + pd->bit_shift = idx; + + rmobile_setup_pm_domain(np, pd); + if (genpd_parent) + pm_genpd_add_subdomain(genpd_parent, &pd->genpd); + of_genpd_add_provider_simple(np, &pd->genpd); + + rmobile_add_pm_domains(base, np, &pd->genpd); + } + return 0; +} + +static int __init rmobile_init_pm_domains(void) +{ + struct device_node *np, *pmd; + bool scanned = false; + void __iomem *base; + int ret = 0; + + for_each_compatible_node(np, NULL, "renesas,sysc-rmobile") { + base = of_iomap(np, 0); + if (!base) { + pr_warn("%s cannot map reg 0\n", np->full_name); + continue; + } + + pmd = of_get_child_by_name(np, "pm-domains"); + if (!pmd) { + pr_warn("%s lacks pm-domains node\n", np->full_name); + continue; + } + + if (!scanned) { + /* Find PM domains containing special blocks */ + get_special_pds(); + scanned = true; + } + + ret = rmobile_add_pm_domains(base, pmd, NULL); + of_node_put(pmd); + if (ret) { + of_node_put(np); + break; + } + } + + put_special_pds(); + + return ret; +} + +core_initcall(rmobile_init_pm_domains); + +#endif /* !CONFIG_ARCH_SHMOBILE_LEGACY */ diff --git a/arch/arm/mach-shmobile/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h index 8f66b343162b..53219786f539 100644 --- a/arch/arm/mach-shmobile/pm-rmobile.h +++ b/arch/arm/mach-shmobile/pm-rmobile.h @@ -21,6 +21,7 @@ struct rmobile_pm_domain { struct dev_power_governor *gov; int (*suspend)(void); void (*resume)(void); + void __iomem *base; unsigned int bit_shift; bool no_debug; }; @@ -36,7 +37,7 @@ struct pm_domain_device { struct platform_device *pdev; }; -#ifdef CONFIG_PM_RMOBILE +#if defined(CONFIG_PM_RMOBILE) && defined(CONFIG_ARCH_SHMOBILE_LEGACY) extern void rmobile_init_domains(struct rmobile_pm_domain domains[], int num); extern void rmobile_add_device_to_domain_td(const char *domain_name, struct platform_device *pdev, diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c index 0e37da654ed5..c0293ae4b013 100644 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -45,6 +45,8 @@ #define PLLC01STPCR IOMEM(0xe61500c8) /* SYSC */ +#define SYSC_BASE IOMEM(0xe6180000) + #define SBAR IOMEM(0xe6180020) #define WUPRMSK IOMEM(0xe6180028) #define WUPSMSK IOMEM(0xe618002c) @@ -118,24 +120,28 @@ static struct rmobile_pm_domain sh7372_pm_domains[] = { .genpd.name = "A4LC", .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, + .base = SYSC_BASE, .bit_shift = 1, }, { .genpd.name = "A4MP", .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, + .base = SYSC_BASE, .bit_shift = 2, }, { .genpd.name = "D4", .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, + .base = SYSC_BASE, .bit_shift = 3, }, { .genpd.name = "A4R", .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, + .base = SYSC_BASE, .bit_shift = 5, .suspend = sh7372_a4r_pd_suspend, .resume = sh7372_intcs_resume, @@ -144,18 +150,21 @@ static struct rmobile_pm_domain sh7372_pm_domains[] = { .genpd.name = "A3RV", .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, + .base = SYSC_BASE, .bit_shift = 6, }, { .genpd.name = "A3RI", .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, + .base = SYSC_BASE, .bit_shift = 8, }, { .genpd.name = "A4S", .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, + .base = SYSC_BASE, .bit_shift = 10, .gov = &pm_domain_always_on_gov, .no_debug = true, @@ -166,6 +175,7 @@ static struct rmobile_pm_domain sh7372_pm_domains[] = { .genpd.name = "A3SP", .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, + .base = SYSC_BASE, .bit_shift = 11, .gov = &pm_domain_always_on_gov, .no_debug = true, @@ -175,6 +185,7 @@ static struct rmobile_pm_domain sh7372_pm_domains[] = { .genpd.name = "A3SG", .genpd.power_on_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, .genpd.power_off_latency_ns = PM_DOMAIN_ON_OFF_LATENCY_NS, + .base = SYSC_BASE, .bit_shift = 13, }, }; diff --git a/arch/arm/mach-shmobile/r8a7790.h b/arch/arm/mach-shmobile/r8a7790.h index 388f0514d931..bf73a850aaed 100644 --- a/arch/arm/mach-shmobile/r8a7790.h +++ b/arch/arm/mach-shmobile/r8a7790.h @@ -1,34 +1,6 @@ #ifndef __ASM_R8A7790_H__ #define __ASM_R8A7790_H__ -/* DMA slave IDs */ -enum { - RCAR_DMA_SLAVE_INVALID, - AUDIO_DMAC_SLAVE_SSI0_TX, - AUDIO_DMAC_SLAVE_SSI0_RX, - AUDIO_DMAC_SLAVE_SSI1_TX, - AUDIO_DMAC_SLAVE_SSI1_RX, - AUDIO_DMAC_SLAVE_SSI2_TX, - AUDIO_DMAC_SLAVE_SSI2_RX, - AUDIO_DMAC_SLAVE_SSI3_TX, - AUDIO_DMAC_SLAVE_SSI3_RX, - AUDIO_DMAC_SLAVE_SSI4_TX, - AUDIO_DMAC_SLAVE_SSI4_RX, - AUDIO_DMAC_SLAVE_SSI5_TX, - AUDIO_DMAC_SLAVE_SSI5_RX, - AUDIO_DMAC_SLAVE_SSI6_TX, - AUDIO_DMAC_SLAVE_SSI6_RX, - AUDIO_DMAC_SLAVE_SSI7_TX, - AUDIO_DMAC_SLAVE_SSI7_RX, - AUDIO_DMAC_SLAVE_SSI8_TX, - AUDIO_DMAC_SLAVE_SSI8_RX, - AUDIO_DMAC_SLAVE_SSI9_TX, - AUDIO_DMAC_SLAVE_SSI9_RX, -}; - -void r8a7790_add_standard_devices(void); -void r8a7790_clock_init(void); -void r8a7790_pinmux_init(void); void r8a7790_pm_init(void); extern struct smp_operations r8a7790_smp_ops; diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index aad97be9cbe1..37f7b15c01bc 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -37,7 +37,7 @@ static void __init emev2_map_io(void) iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc)); } -static const char *emev2_boards_compat_dt[] __initconst = { +static const char *const emev2_boards_compat_dt[] __initconst = { "renesas,emev2", NULL, }; diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index d191cf419731..dd64caf79216 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -656,7 +656,7 @@ static struct resource pmu_resources[] = { }; static struct platform_device pmu_device = { - .name = "arm-pmu", + .name = "armv7-pmu", .id = -1, .num_resources = ARRAY_SIZE(pmu_resources), .resource = pmu_resources, diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index ec7d97dca4de..3a18af4922b4 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -14,295 +14,14 @@ * GNU General Public License for more details. */ -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/of_platform.h> -#include <linux/platform_data/gpio-rcar.h> -#include <linux/platform_data/irq-renesas-irqc.h> -#include <linux/serial_sci.h> -#include <linux/sh_dma.h> -#include <linux/sh_timer.h> +#include <linux/init.h> #include <asm/mach/arch.h> #include "common.h" -#include "dma-register.h" -#include "irqs.h" #include "r8a7790.h" #include "rcar-gen2.h" -/* Audio-DMAC */ -#define AUDIO_DMAC_SLAVE(_id, _addr, t, r) \ -{ \ - .slave_id = AUDIO_DMAC_SLAVE_## _id ##_TX, \ - .addr = _addr + 0x8, \ - .chcr = CHCR_TX(XMIT_SZ_32BIT), \ - .mid_rid = t, \ -}, { \ - .slave_id = AUDIO_DMAC_SLAVE_## _id ##_RX, \ - .addr = _addr + 0xc, \ - .chcr = CHCR_RX(XMIT_SZ_32BIT), \ - .mid_rid = r, \ -} - -static const struct sh_dmae_slave_config r8a7790_audio_dmac_slaves[] = { - AUDIO_DMAC_SLAVE(SSI0, 0xec241000, 0x01, 0x02), - AUDIO_DMAC_SLAVE(SSI1, 0xec241040, 0x03, 0x04), - AUDIO_DMAC_SLAVE(SSI2, 0xec241080, 0x05, 0x06), - AUDIO_DMAC_SLAVE(SSI3, 0xec2410c0, 0x07, 0x08), - AUDIO_DMAC_SLAVE(SSI4, 0xec241100, 0x09, 0x0a), - AUDIO_DMAC_SLAVE(SSI5, 0xec241140, 0x0b, 0x0c), - AUDIO_DMAC_SLAVE(SSI6, 0xec241180, 0x0d, 0x0e), - AUDIO_DMAC_SLAVE(SSI7, 0xec2411c0, 0x0f, 0x10), - AUDIO_DMAC_SLAVE(SSI8, 0xec241200, 0x11, 0x12), - AUDIO_DMAC_SLAVE(SSI9, 0xec241240, 0x13, 0x14), -}; - -#define DMAE_CHANNEL(a, b) \ -{ \ - .offset = (a) - 0x20, \ - .dmars = (a) - 0x20 + 0x40, \ - .chclr_bit = (b), \ - .chclr_offset = 0x80 - 0x20, \ -} - -static const struct sh_dmae_channel r8a7790_audio_dmac_channels[] = { - DMAE_CHANNEL(0x8000, 0), - DMAE_CHANNEL(0x8080, 1), - DMAE_CHANNEL(0x8100, 2), - DMAE_CHANNEL(0x8180, 3), - DMAE_CHANNEL(0x8200, 4), - DMAE_CHANNEL(0x8280, 5), - DMAE_CHANNEL(0x8300, 6), - DMAE_CHANNEL(0x8380, 7), - DMAE_CHANNEL(0x8400, 8), - DMAE_CHANNEL(0x8480, 9), - DMAE_CHANNEL(0x8500, 10), - DMAE_CHANNEL(0x8580, 11), - DMAE_CHANNEL(0x8600, 12), -}; - -static struct sh_dmae_pdata r8a7790_audio_dmac_platform_data = { - .slave = r8a7790_audio_dmac_slaves, - .slave_num = ARRAY_SIZE(r8a7790_audio_dmac_slaves), - .channel = r8a7790_audio_dmac_channels, - .channel_num = ARRAY_SIZE(r8a7790_audio_dmac_channels), - .ts_low_shift = TS_LOW_SHIFT, - .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT, - .ts_high_shift = TS_HI_SHIFT, - .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT, - .ts_shift = dma_ts_shift, - .ts_shift_num = ARRAY_SIZE(dma_ts_shift), - .dmaor_init = DMAOR_DME, - .chclr_present = 1, - .chclr_bitwise = 1, -}; - -static struct resource r8a7790_audio_dmac_resources[] = { - /* Channel registers and DMAOR for low */ - DEFINE_RES_MEM(0xec700020, 0x8663 - 0x20), - DEFINE_RES_IRQ(gic_spi(346)), - DEFINE_RES_NAMED(gic_spi(320), 13, NULL, IORESOURCE_IRQ), - - /* Channel registers and DMAOR for hi */ - DEFINE_RES_MEM(0xec720020, 0x8663 - 0x20), /* hi */ - DEFINE_RES_IRQ(gic_spi(347)), - DEFINE_RES_NAMED(gic_spi(333), 13, NULL, IORESOURCE_IRQ), -}; - -#define r8a7790_register_audio_dmac(id) \ - platform_device_register_resndata( \ - NULL, "sh-dma-engine", id, \ - &r8a7790_audio_dmac_resources[id * 3], 3, \ - &r8a7790_audio_dmac_platform_data, \ - sizeof(r8a7790_audio_dmac_platform_data)) - -static const struct resource pfc_resources[] __initconst = { - DEFINE_RES_MEM(0xe6060000, 0x250), -}; - -#define r8a7790_register_pfc() \ - platform_device_register_simple("pfc-r8a7790", -1, pfc_resources, \ - ARRAY_SIZE(pfc_resources)) - -#define R8A7790_GPIO(idx) \ -static const struct resource r8a7790_gpio##idx##_resources[] __initconst = { \ - DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50), \ - DEFINE_RES_IRQ(gic_spi(4 + (idx))), \ -}; \ - \ -static const struct gpio_rcar_config \ -r8a7790_gpio##idx##_platform_data __initconst = { \ - .gpio_base = 32 * (idx), \ - .irq_base = 0, \ - .number_of_pins = 32, \ - .pctl_name = "pfc-r8a7790", \ - .has_both_edge_trigger = 1, \ -}; \ - -R8A7790_GPIO(0); -R8A7790_GPIO(1); -R8A7790_GPIO(2); -R8A7790_GPIO(3); -R8A7790_GPIO(4); -R8A7790_GPIO(5); - -#define r8a7790_register_gpio(idx) \ - platform_device_register_resndata(NULL, "gpio_rcar", idx, \ - r8a7790_gpio##idx##_resources, \ - ARRAY_SIZE(r8a7790_gpio##idx##_resources), \ - &r8a7790_gpio##idx##_platform_data, \ - sizeof(r8a7790_gpio##idx##_platform_data)) - -static struct resource i2c_resources[] __initdata = { - /* I2C0 */ - DEFINE_RES_MEM(0xE6508000, 0x40), - DEFINE_RES_IRQ(gic_spi(287)), - /* I2C1 */ - DEFINE_RES_MEM(0xE6518000, 0x40), - DEFINE_RES_IRQ(gic_spi(288)), - /* I2C2 */ - DEFINE_RES_MEM(0xE6530000, 0x40), - DEFINE_RES_IRQ(gic_spi(286)), - /* I2C3 */ - DEFINE_RES_MEM(0xE6540000, 0x40), - DEFINE_RES_IRQ(gic_spi(290)), - -}; - -#define r8a7790_register_i2c(idx) \ - platform_device_register_simple( \ - "i2c-rcar_gen2", idx, \ - i2c_resources + (2 * idx), 2); \ - -void __init r8a7790_pinmux_init(void) -{ - r8a7790_register_pfc(); - r8a7790_register_gpio(0); - r8a7790_register_gpio(1); - r8a7790_register_gpio(2); - r8a7790_register_gpio(3); - r8a7790_register_gpio(4); - r8a7790_register_gpio(5); -} - -#define __R8A7790_SCIF(scif_type, _scscr, index, baseaddr, irq) \ -static struct plat_sci_port scif##index##_platform_data = { \ - .type = scif_type, \ - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \ - .scscr = _scscr, \ -}; \ - \ -static struct resource scif##index##_resources[] = { \ - DEFINE_RES_MEM(baseaddr, 0x100), \ - DEFINE_RES_IRQ(irq), \ -} - -#define R8A7790_SCIF(index, baseaddr, irq) \ - __R8A7790_SCIF(PORT_SCIF, SCSCR_RE | SCSCR_TE, \ - index, baseaddr, irq) - -#define R8A7790_SCIFA(index, baseaddr, irq) \ - __R8A7790_SCIF(PORT_SCIFA, SCSCR_RE | SCSCR_TE | SCSCR_CKE0, \ - index, baseaddr, irq) - -#define R8A7790_SCIFB(index, baseaddr, irq) \ - __R8A7790_SCIF(PORT_SCIFB, SCSCR_RE | SCSCR_TE, \ - index, baseaddr, irq) - -#define R8A7790_HSCIF(index, baseaddr, irq) \ - __R8A7790_SCIF(PORT_HSCIF, SCSCR_RE | SCSCR_TE, \ - index, baseaddr, irq) - -R8A7790_SCIFA(0, 0xe6c40000, gic_spi(144)); /* SCIFA0 */ -R8A7790_SCIFA(1, 0xe6c50000, gic_spi(145)); /* SCIFA1 */ -R8A7790_SCIFB(2, 0xe6c20000, gic_spi(148)); /* SCIFB0 */ -R8A7790_SCIFB(3, 0xe6c30000, gic_spi(149)); /* SCIFB1 */ -R8A7790_SCIFB(4, 0xe6ce0000, gic_spi(150)); /* SCIFB2 */ -R8A7790_SCIFA(5, 0xe6c60000, gic_spi(151)); /* SCIFA2 */ -R8A7790_SCIF(6, 0xe6e60000, gic_spi(152)); /* SCIF0 */ -R8A7790_SCIF(7, 0xe6e68000, gic_spi(153)); /* SCIF1 */ -R8A7790_HSCIF(8, 0xe62c0000, gic_spi(154)); /* HSCIF0 */ -R8A7790_HSCIF(9, 0xe62c8000, gic_spi(155)); /* HSCIF1 */ - -#define r8a7790_register_scif(index) \ - platform_device_register_resndata(NULL, "sh-sci", index, \ - scif##index##_resources, \ - ARRAY_SIZE(scif##index##_resources), \ - &scif##index##_platform_data, \ - sizeof(scif##index##_platform_data)) - -static const struct renesas_irqc_config irqc0_data __initconst = { - .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */ -}; - -static const struct resource irqc0_resources[] __initconst = { - DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */ - DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */ - DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */ - DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */ - DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */ -}; - -#define r8a7790_register_irqc(idx) \ - platform_device_register_resndata(NULL, "renesas_irqc", \ - idx, irqc##idx##_resources, \ - ARRAY_SIZE(irqc##idx##_resources), \ - &irqc##idx##_data, \ - sizeof(struct renesas_irqc_config)) - -static const struct resource thermal_resources[] __initconst = { - DEFINE_RES_MEM(0xe61f0000, 0x14), - DEFINE_RES_MEM(0xe61f0100, 0x38), - DEFINE_RES_IRQ(gic_spi(69)), -}; - -#define r8a7790_register_thermal() \ - platform_device_register_simple("rcar_thermal", -1, \ - thermal_resources, \ - ARRAY_SIZE(thermal_resources)) - -static struct sh_timer_config cmt0_platform_data = { - .channels_mask = 0x60, -}; - -static struct resource cmt0_resources[] = { - DEFINE_RES_MEM(0xffca0000, 0x1004), - DEFINE_RES_IRQ(gic_spi(142)), -}; - -#define r8a7790_register_cmt(idx) \ - platform_device_register_resndata(NULL, "sh-cmt-48-gen2", \ - idx, cmt##idx##_resources, \ - ARRAY_SIZE(cmt##idx##_resources), \ - &cmt##idx##_platform_data, \ - sizeof(struct sh_timer_config)) - -void __init r8a7790_add_standard_devices(void) -{ - r8a7790_register_scif(0); - r8a7790_register_scif(1); - r8a7790_register_scif(2); - r8a7790_register_scif(3); - r8a7790_register_scif(4); - r8a7790_register_scif(5); - r8a7790_register_scif(6); - r8a7790_register_scif(7); - r8a7790_register_scif(8); - r8a7790_register_scif(9); - r8a7790_register_cmt(0); - r8a7790_register_irqc(0); - r8a7790_register_thermal(); - r8a7790_register_i2c(0); - r8a7790_register_i2c(1); - r8a7790_register_i2c(2); - r8a7790_register_i2c(3); - r8a7790_register_audio_dmac(0); - r8a7790_register_audio_dmac(1); -} - -#ifdef CONFIG_USE_OF - static const char * const r8a7790_boards_compat_dt[] __initconst = { "renesas,r8a7790", NULL, @@ -316,4 +35,3 @@ DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)") .reserve = rcar_gen2_reserve, .dt_compat = r8a7790_boards_compat_dt, MACHINE_END -#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index cc9470dfb1ce..d1fa625e61f5 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -52,15 +52,13 @@ void __init rcar_gen2_timer_init(void) { #if defined(CONFIG_ARM_ARCH_TIMER) || defined(CONFIG_COMMON_CLK) u32 mode = rcar_gen2_read_mode_pins(); - bool is_e2 = (bool)of_find_compatible_node(NULL, NULL, - "renesas,r8a7794"); #endif #ifdef CONFIG_ARM_ARCH_TIMER void __iomem *base; int extal_mhz = 0; u32 freq; - if (is_e2) { + if (of_machine_is_compatible("renesas,r8a7794")) { freq = 260000000 / 8; /* ZS / 8 */ /* CNTVOFF has to be initialized either from non-secure * Hypervisor mode or secure Monitor mode with SCR.NS==1. diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index fb5e1bb34be8..faea74a2151b 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -563,7 +563,7 @@ static struct resource pmu_resources[] = { }; static struct platform_device pmu_device = { - .name = "arm-pmu", + .name = "armv7-pmu", .id = -1, .num_resources = ARRAY_SIZE(pmu_resources), .resource = pmu_resources, @@ -766,7 +766,9 @@ void __init __weak sh73a0_register_twd(void) { } void __init sh73a0_earlytimer_init(void) { shmobile_init_delay(); +#ifndef CONFIG_COMMON_CLK sh73a0_clock_init(); +#endif shmobile_earlytimer_init(); sh73a0_register_twd(); } @@ -785,8 +787,9 @@ void __init sh73a0_add_early_devices(void) void __init sh73a0_add_standard_devices_dt(void) { /* clocks are setup late during boot in the case of DT */ +#ifndef CONFIG_COMMON_CLK sh73a0_clock_init(); - +#endif of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 3f761f839043..9fc280e24ef4 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -56,7 +56,7 @@ static struct rcar_sysc_ch *r8a7779_ch_cpu[4] = { [3] = &r8a7779_ch_cpu3, }; -#ifdef CONFIG_HAVE_ARM_TWD +#if defined(CONFIG_HAVE_ARM_TWD) && !defined(CONFIG_ARCH_MULTIPLATFORM) static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, R8A7779_SCU_BASE + 0x600, 29); void __init r8a7779_register_twd(void) { diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h index 483cb467bf65..a0f3b1cd497c 100644 --- a/arch/arm/mach-socfpga/core.h +++ b/arch/arm/mach-socfpga/core.h @@ -45,6 +45,6 @@ extern char secondary_trampoline, secondary_trampoline_end; extern unsigned long socfpga_cpu1start_addr; -#define SOCFPGA_SCU_VIRT_BASE 0xfffec000 +#define SOCFPGA_SCU_VIRT_BASE 0xfee00000 #endif diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index 383d61e138af..f5e597c207b9 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -23,6 +23,7 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/cacheflush.h> #include "core.h" @@ -73,6 +74,10 @@ void __init socfpga_sysmgr_init(void) (u32 *) &socfpga_cpu1start_addr)) pr_err("SMP: Need cpu1-start-addr in device tree.\n"); + /* Ensure that socfpga_cpu1start_addr is visible to other CPUs */ + smp_wmb(); + sync_cache_w(&socfpga_cpu1start_addr); + sys_manager_base_addr = of_iomap(np, 0); np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr"); diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index 8825bc9e2553..3b1ac463a494 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -13,6 +13,7 @@ menuconfig ARCH_STI select ARM_ERRATA_775420 select PL310_ERRATA_753970 if CACHE_L2X0 select PL310_ERRATA_769419 if CACHE_L2X0 + select RESET_CONTROLLER help Include support for STiH41x SOCs like STiH415/416 using the device tree for discovery diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c index 3cf6ef8d4317..b373acade338 100644 --- a/arch/arm/mach-sti/board-dt.c +++ b/arch/arm/mach-sti/board-dt.c @@ -18,6 +18,8 @@ static const char *stih41x_dt_match[] __initdata = { "st,stih415", "st,stih416", "st,stih407", + "st,stih410", + "st,stih418", NULL }; diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c index e44d028555a4..587b0468efcc 100644 --- a/arch/arm/mach-sunxi/platsmp.c +++ b/arch/arm/mach-sunxi/platsmp.c @@ -120,4 +120,4 @@ static struct smp_operations sun6i_smp_ops __initdata = { .smp_prepare_cpus = sun6i_smp_prepare_cpus, .smp_boot_secondary = sun6i_smp_boot_secondary, }; -CPU_METHOD_OF_DECLARE(sun6i_smp, "allwinner,sun6i-a31", &sun6i_smp_ops); +CPU_METHOD_OF_DECLARE(sun6i_a31_smp, "allwinner,sun6i-a31", &sun6i_smp_ops); diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 1f986758784a..1bc811a74a9f 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -13,9 +13,15 @@ #include <linux/clk-provider.h> #include <linux/clocksource.h> #include <linux/init.h> +#include <linux/platform_device.h> #include <asm/mach/arch.h> +static void __init sunxi_dt_cpufreq_init(void) +{ + platform_device_register_simple("cpufreq-dt", -1, NULL, 0); +} + static const char * const sunxi_board_dt_compat[] = { "allwinner,sun4i-a10", "allwinner,sun5i-a10s", @@ -25,10 +31,12 @@ static const char * const sunxi_board_dt_compat[] = { DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") .dt_compat = sunxi_board_dt_compat, + .init_late = sunxi_dt_cpufreq_init, MACHINE_END static const char * const sun6i_board_dt_compat[] = { "allwinner,sun6i-a31", + "allwinner,sun6i-a31s", NULL, }; @@ -44,6 +52,7 @@ static void __init sun6i_timer_init(void) DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family") .init_time = sun6i_timer_init, .dt_compat = sun6i_board_dt_compat, + .init_late = sunxi_dt_cpufreq_init, MACHINE_END static const char * const sun7i_board_dt_compat[] = { @@ -53,6 +62,7 @@ static const char * const sun7i_board_dt_compat[] = { DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family") .dt_compat = sun7i_board_dt_compat, + .init_late = sunxi_dt_cpufreq_init, MACHINE_END static const char * const sun8i_board_dt_compat[] = { @@ -62,6 +72,7 @@ static const char * const sun8i_board_dt_compat[] = { DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i (A23) Family") .dt_compat = sun8i_board_dt_compat, + .init_late = sunxi_dt_cpufreq_init, MACHINE_END static const char * const sun9i_board_dt_compat[] = { diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index d0be9a1ef6b8..5d1a318f1302 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -27,6 +27,7 @@ config ARCH_TEGRA_2x_SOC select PINCTRL_TEGRA20 select PL310_ERRATA_727915 if CACHE_L2X0 select PL310_ERRATA_769419 if CACHE_L2X0 + select TEGRA_TIMER help Support for NVIDIA Tegra AP20 and T20 processors, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller @@ -37,6 +38,7 @@ config ARCH_TEGRA_3x_SOC select ARM_ERRATA_764369 if SMP select PINCTRL_TEGRA30 select PL310_ERRATA_769419 if CACHE_L2X0 + select TEGRA_TIMER help Support for NVIDIA Tegra T30 processor family, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller @@ -47,6 +49,7 @@ config ARCH_TEGRA_114_SOC select ARM_L1_CACHE_SHIFT_6 select HAVE_ARM_ARCH_TIMER select PINCTRL_TEGRA114 + select TEGRA_TIMER help Support for NVIDIA Tegra T114 processor family, based on the ARM CortexA15MP CPU @@ -56,6 +59,7 @@ config ARCH_TEGRA_124_SOC select ARM_L1_CACHE_SHIFT_6 select HAVE_ARM_ARCH_TIMER select PINCTRL_TEGRA124 + select TEGRA_TIMER help Support for NVIDIA Tegra T124 processor family, based on the ARM CortexA15MP CPU diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index ef016af1c9e7..914341bcef25 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -91,8 +91,6 @@ static void __init tegra_dt_init(void) struct soc_device *soc_dev; struct device *parent = NULL; - tegra_clocks_apply_init_table(); - soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); if (!soc_dev_attr) goto out; diff --git a/arch/arm/mach-ux500/pm_domains.c b/arch/arm/mach-ux500/pm_domains.c index 0d4b5b46f15b..4d71c90f801c 100644 --- a/arch/arm/mach-ux500/pm_domains.c +++ b/arch/arm/mach-ux500/pm_domains.c @@ -49,7 +49,7 @@ static struct generic_pm_domain *ux500_pm_domains[NR_DOMAINS] = { [DOMAIN_VAPE] = &ux500_pm_domain_vape, }; -static struct of_device_id ux500_pm_domain_matches[] = { +static const struct of_device_id ux500_pm_domain_matches[] __initconst = { { .compatible = "stericsson,ux500-pm-domains", }, { }, }; diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 08fb8c89f414..6ea09fe53426 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -728,43 +728,6 @@ struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = { }; #endif -#ifdef CONFIG_LEDS -#define VA_LEDS_BASE (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET) - -static void versatile_leds_event(led_event_t ledevt) -{ - unsigned long flags; - u32 val; - - local_irq_save(flags); - val = readl(VA_LEDS_BASE); - - switch (ledevt) { - case led_idle_start: - val = val & ~VERSATILE_SYS_LED0; - break; - - case led_idle_end: - val = val | VERSATILE_SYS_LED0; - break; - - case led_timer: - val = val ^ VERSATILE_SYS_LED1; - break; - - case led_halted: - val = 0; - break; - - default: - break; - } - - writel(val, VA_LEDS_BASE); - local_irq_restore(flags); -} -#endif /* CONFIG_LEDS */ - void versatile_restart(enum reboot_mode mode, const char *cmd) { void __iomem *sys = __io_address(VERSATILE_SYS_BASE); diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c index 9f9bc61ca64b..7de3e92a13b0 100644 --- a/arch/arm/mach-versatile/versatile_dt.c +++ b/arch/arm/mach-versatile/versatile_dt.c @@ -35,7 +35,7 @@ static void __init versatile_dt_init(void) versatile_auxdata_lookup, NULL); } -static const char *versatile_dt_match[] __initconst = { +static const char *const versatile_dt_match[] __initconst = { "arm,versatile-ab", "arm,versatile-pb", NULL, diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index d6b16d9a7838..3c2509b4b694 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -73,6 +73,7 @@ config ARCH_VEXPRESS_TC2_PM depends on MCPM select ARM_CCI select ARCH_VEXPRESS_SPC + select ARM_CPU_SUSPEND help Support for CPU and cluster power management on Versatile Express with a TC2 (A15x2 A7x3) big.LITTLE core tile. diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index aaa5162c1509..78e5e007f52d 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -9,6 +9,8 @@ config ARCH_ZYNQ select HAVE_ARM_TWD if SMP select ICST select MFD_SYSCON + select PINCTRL + select PINCTRL_ZYNQ select SOC_BUS help Support for Xilinx Zynq ARM Cortex A9 Platform diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 26f92c28d22b..c887196cfdbe 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -146,8 +146,6 @@ out: platform_device_register(&zynq_cpuidle_device); platform_device_register_full(&devinfo); - - zynq_slcr_init(); } static void __init zynq_timer_init(void) diff --git a/arch/arm/mach-zynq/pm.c b/arch/arm/mach-zynq/pm.c index 911fcf865be8..fa44fc1b6dd5 100644 --- a/arch/arm/mach-zynq/pm.c +++ b/arch/arm/mach-zynq/pm.c @@ -61,7 +61,7 @@ static void __iomem *zynq_pm_ioremap(const char *comp) /** * zynq_pm_late_init() - Power management init * - * Initialization of power management related featurs and infrastructure. + * Initialization of power management related features and infrastructure. */ void __init zynq_pm_late_init(void) { diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c index d4cb50cf97c0..c3c24fd8b306 100644 --- a/arch/arm/mach-zynq/slcr.c +++ b/arch/arm/mach-zynq/slcr.c @@ -47,11 +47,6 @@ static struct regmap *zynq_slcr_regmap; */ static int zynq_slcr_write(u32 val, u32 offset) { - if (!zynq_slcr_regmap) { - writel(val, zynq_slcr_base + offset); - return 0; - } - return regmap_write(zynq_slcr_regmap, offset, val); } @@ -65,12 +60,7 @@ static int zynq_slcr_write(u32 val, u32 offset) */ static int zynq_slcr_read(u32 *val, u32 offset) { - if (zynq_slcr_regmap) - return regmap_read(zynq_slcr_regmap, offset, val); - - *val = readl(zynq_slcr_base + offset); - - return 0; + return regmap_read(zynq_slcr_regmap, offset, val); } /** @@ -196,23 +186,6 @@ void zynq_slcr_cpu_state_write(int cpu, bool die) } /** - * zynq_slcr_init - Regular slcr driver init - * Return: 0 on success, negative errno otherwise. - * - * Called early during boot from platform code to remap SLCR area. - */ -int __init zynq_slcr_init(void) -{ - zynq_slcr_regmap = syscon_regmap_lookup_by_compatible("xlnx,zynq-slcr"); - if (IS_ERR(zynq_slcr_regmap)) { - pr_err("%s: failed to find zynq-slcr\n", __func__); - return -ENODEV; - } - - return 0; -} - -/** * zynq_early_slcr_init - Early slcr init function * * Return: 0 on success, negative errno otherwise. @@ -237,6 +210,12 @@ int __init zynq_early_slcr_init(void) np->data = (__force void *)zynq_slcr_base; + zynq_slcr_regmap = syscon_regmap_lookup_by_compatible("xlnx,zynq-slcr"); + if (IS_ERR(zynq_slcr_regmap)) { + pr_err("%s: failed to find zynq-slcr\n", __func__); + return -ENODEV; + } + /* unlock the SLCR so that registers can be changed */ zynq_slcr_unlock(); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index c43c71455566..9b4f29e595a4 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -892,13 +892,6 @@ config CACHE_L2X0 if CACHE_L2X0 -config CACHE_PL310 - bool - default y if CPU_V7 && !(CPU_V6 || CPU_V6K) - help - This option enables optimisations for the PL310 cache - controller. - config PL310_ERRATA_588369 bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines" help diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 5e65ca8dea62..8f15f70622a6 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -1,5 +1,5 @@ /* - * arch/arm/mm/cache-l2x0.c - L210/L220 cache controller support + * arch/arm/mm/cache-l2x0.c - L210/L220/L310 cache controller support * * Copyright (C) 2007 ARM Limited * @@ -41,12 +41,14 @@ struct l2c_init_data { void (*enable)(void __iomem *, u32, unsigned); void (*fixup)(void __iomem *, u32, struct outer_cache_fns *); void (*save)(void __iomem *); + void (*configure)(void __iomem *); struct outer_cache_fns outer_cache; }; #define CACHE_LINE_SIZE 32 static void __iomem *l2x0_base; +static const struct l2c_init_data *l2x0_data; static DEFINE_RAW_SPINLOCK(l2x0_lock); static u32 l2x0_way_mask; /* Bitmask of active ways */ static u32 l2x0_size; @@ -106,6 +108,19 @@ static inline void l2c_unlock(void __iomem *base, unsigned num) } } +static void l2c_configure(void __iomem *base) +{ + if (outer_cache.configure) { + outer_cache.configure(&l2x0_saved_regs); + return; + } + + if (l2x0_data->configure) + l2x0_data->configure(base); + + l2c_write_sec(l2x0_saved_regs.aux_ctrl, base, L2X0_AUX_CTRL); +} + /* * Enable the L2 cache controller. This function must only be * called when the cache controller is known to be disabled. @@ -114,7 +129,12 @@ static void l2c_enable(void __iomem *base, u32 aux, unsigned num_lock) { unsigned long flags; - l2c_write_sec(aux, base, L2X0_AUX_CTRL); + /* Do not touch the controller if already enabled. */ + if (readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN) + return; + + l2x0_saved_regs.aux_ctrl = aux; + l2c_configure(base); l2c_unlock(base, num_lock); @@ -136,76 +156,14 @@ static void l2c_disable(void) dsb(st); } -#ifdef CONFIG_CACHE_PL310 -static inline void cache_wait(void __iomem *reg, unsigned long mask) -{ - /* cache operations by line are atomic on PL310 */ -} -#else -#define cache_wait l2c_wait_mask -#endif - -static inline void cache_sync(void) -{ - void __iomem *base = l2x0_base; - - writel_relaxed(0, base + sync_reg_offset); - cache_wait(base + L2X0_CACHE_SYNC, 1); -} - -#if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915) -static inline void debug_writel(unsigned long val) -{ - l2c_set_debug(l2x0_base, val); -} -#else -/* Optimised out for non-errata case */ -static inline void debug_writel(unsigned long val) -{ -} -#endif - -static void l2x0_cache_sync(void) -{ - unsigned long flags; - - raw_spin_lock_irqsave(&l2x0_lock, flags); - cache_sync(); - raw_spin_unlock_irqrestore(&l2x0_lock, flags); -} - -static void __l2x0_flush_all(void) -{ - debug_writel(0x03); - __l2c_op_way(l2x0_base + L2X0_CLEAN_INV_WAY); - cache_sync(); - debug_writel(0x00); -} - -static void l2x0_flush_all(void) -{ - unsigned long flags; - - /* clean all ways */ - raw_spin_lock_irqsave(&l2x0_lock, flags); - __l2x0_flush_all(); - raw_spin_unlock_irqrestore(&l2x0_lock, flags); -} - -static void l2x0_disable(void) +static void l2c_save(void __iomem *base) { - unsigned long flags; - - raw_spin_lock_irqsave(&l2x0_lock, flags); - __l2x0_flush_all(); - l2c_write_sec(0, l2x0_base, L2X0_CTRL); - dsb(st); - raw_spin_unlock_irqrestore(&l2x0_lock, flags); + l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); } -static void l2c_save(void __iomem *base) +static void l2c_resume(void) { - l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); + l2c_enable(l2x0_base, l2x0_saved_regs.aux_ctrl, l2x0_data->num_lock); } /* @@ -288,14 +246,6 @@ static void l2c210_sync(void) __l2c210_cache_sync(l2x0_base); } -static void l2c210_resume(void) -{ - void __iomem *base = l2x0_base; - - if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) - l2c_enable(base, l2x0_saved_regs.aux_ctrl, 1); -} - static const struct l2c_init_data l2c210_data __initconst = { .type = "L2C-210", .way_size_0 = SZ_8K, @@ -309,7 +259,7 @@ static const struct l2c_init_data l2c210_data __initconst = { .flush_all = l2c210_flush_all, .disable = l2c_disable, .sync = l2c210_sync, - .resume = l2c210_resume, + .resume = l2c_resume, }, }; @@ -466,7 +416,7 @@ static const struct l2c_init_data l2c220_data = { .flush_all = l2c220_flush_all, .disable = l2c_disable, .sync = l2c220_sync, - .resume = l2c210_resume, + .resume = l2c_resume, }, }; @@ -615,39 +565,29 @@ static void __init l2c310_save(void __iomem *base) L310_POWER_CTRL); } -static void l2c310_resume(void) +static void l2c310_configure(void __iomem *base) { - void __iomem *base = l2x0_base; + unsigned revision; - if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) { - unsigned revision; - - /* restore pl310 setup */ - writel_relaxed(l2x0_saved_regs.tag_latency, - base + L310_TAG_LATENCY_CTRL); - writel_relaxed(l2x0_saved_regs.data_latency, - base + L310_DATA_LATENCY_CTRL); - writel_relaxed(l2x0_saved_regs.filter_end, - base + L310_ADDR_FILTER_END); - writel_relaxed(l2x0_saved_regs.filter_start, - base + L310_ADDR_FILTER_START); - - revision = readl_relaxed(base + L2X0_CACHE_ID) & - L2X0_CACHE_ID_RTL_MASK; - - if (revision >= L310_CACHE_ID_RTL_R2P0) - l2c_write_sec(l2x0_saved_regs.prefetch_ctrl, base, - L310_PREFETCH_CTRL); - if (revision >= L310_CACHE_ID_RTL_R3P0) - l2c_write_sec(l2x0_saved_regs.pwr_ctrl, base, - L310_POWER_CTRL); - - l2c_enable(base, l2x0_saved_regs.aux_ctrl, 8); - - /* Re-enable full-line-of-zeros for Cortex-A9 */ - if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO) - set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); - } + /* restore pl310 setup */ + l2c_write_sec(l2x0_saved_regs.tag_latency, base, + L310_TAG_LATENCY_CTRL); + l2c_write_sec(l2x0_saved_regs.data_latency, base, + L310_DATA_LATENCY_CTRL); + l2c_write_sec(l2x0_saved_regs.filter_end, base, + L310_ADDR_FILTER_END); + l2c_write_sec(l2x0_saved_regs.filter_start, base, + L310_ADDR_FILTER_START); + + revision = readl_relaxed(base + L2X0_CACHE_ID) & + L2X0_CACHE_ID_RTL_MASK; + + if (revision >= L310_CACHE_ID_RTL_R2P0) + l2c_write_sec(l2x0_saved_regs.prefetch_ctrl, base, + L310_PREFETCH_CTRL); + if (revision >= L310_CACHE_ID_RTL_R3P0) + l2c_write_sec(l2x0_saved_regs.pwr_ctrl, base, + L310_POWER_CTRL); } static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, void *data) @@ -699,6 +639,23 @@ static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock) aux &= ~(L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_EARLY_BRESP); } + /* r3p0 or later has power control register */ + if (rev >= L310_CACHE_ID_RTL_R3P0) + l2x0_saved_regs.pwr_ctrl = L310_DYNAMIC_CLK_GATING_EN | + L310_STNDBY_MODE_EN; + + /* + * Always enable non-secure access to the lockdown registers - + * we write to them as part of the L2C enable sequence so they + * need to be accessible. + */ + aux |= L310_AUX_CTRL_NS_LOCKDOWN; + + l2c_enable(base, aux, num_lock); + + /* Read back resulting AUX_CTRL value as it could have been altered. */ + aux = readl_relaxed(base + L2X0_AUX_CTRL); + if (aux & (L310_AUX_CTRL_DATA_PREFETCH | L310_AUX_CTRL_INSTR_PREFETCH)) { u32 prefetch = readl_relaxed(base + L310_PREFETCH_CTRL); @@ -712,23 +669,12 @@ static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock) if (rev >= L310_CACHE_ID_RTL_R3P0) { u32 power_ctrl; - l2c_write_sec(L310_DYNAMIC_CLK_GATING_EN | L310_STNDBY_MODE_EN, - base, L310_POWER_CTRL); power_ctrl = readl_relaxed(base + L310_POWER_CTRL); pr_info("L2C-310 dynamic clock gating %sabled, standby mode %sabled\n", power_ctrl & L310_DYNAMIC_CLK_GATING_EN ? "en" : "dis", power_ctrl & L310_STNDBY_MODE_EN ? "en" : "dis"); } - /* - * Always enable non-secure access to the lockdown registers - - * we write to them as part of the L2C enable sequence so they - * need to be accessible. - */ - aux |= L310_AUX_CTRL_NS_LOCKDOWN; - - l2c_enable(base, aux, num_lock); - if (aux & L310_AUX_CTRL_FULL_LINE_ZERO) { set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); cpu_notifier(l2c310_cpu_enable_flz, 0); @@ -760,11 +706,11 @@ static void __init l2c310_fixup(void __iomem *base, u32 cache_id, if (revision >= L310_CACHE_ID_RTL_R3P0 && revision < L310_CACHE_ID_RTL_R3P2) { - u32 val = readl_relaxed(base + L310_PREFETCH_CTRL); + u32 val = l2x0_saved_regs.prefetch_ctrl; /* I don't think bit23 is required here... but iMX6 does so */ if (val & (BIT(30) | BIT(23))) { val &= ~(BIT(30) | BIT(23)); - l2c_write_sec(val, base, L310_PREFETCH_CTRL); + l2x0_saved_regs.prefetch_ctrl = val; errata[n++] = "752271"; } } @@ -800,6 +746,15 @@ static void l2c310_disable(void) l2c_disable(); } +static void l2c310_resume(void) +{ + l2c_resume(); + + /* Re-enable full-line-of-zeros for Cortex-A9 */ + if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_FULL_LINE_ZERO) + set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); +} + static const struct l2c_init_data l2c310_init_fns __initconst = { .type = "L2C-310", .way_size_0 = SZ_8K, @@ -807,6 +762,7 @@ static const struct l2c_init_data l2c310_init_fns __initconst = { .enable = l2c310_enable, .fixup = l2c310_fixup, .save = l2c310_save, + .configure = l2c310_configure, .outer_cache = { .inv_range = l2c210_inv_range, .clean_range = l2c210_clean_range, @@ -818,14 +774,22 @@ static const struct l2c_init_data l2c310_init_fns __initconst = { }, }; -static void __init __l2c_init(const struct l2c_init_data *data, - u32 aux_val, u32 aux_mask, u32 cache_id) +static int __init __l2c_init(const struct l2c_init_data *data, + u32 aux_val, u32 aux_mask, u32 cache_id) { struct outer_cache_fns fns; unsigned way_size_bits, ways; u32 aux, old_aux; /* + * Save the pointer globally so that callbacks which do not receive + * context from callers can access the structure. + */ + l2x0_data = kmemdup(data, sizeof(*data), GFP_KERNEL); + if (!l2x0_data) + return -ENOMEM; + + /* * Sanity check the aux values. aux_mask is the bits we preserve * from reading the hardware register, and aux_val is the bits we * set. @@ -884,6 +848,7 @@ static void __init __l2c_init(const struct l2c_init_data *data, fns = data->outer_cache; fns.write_sec = outer_cache.write_sec; + fns.configure = outer_cache.configure; if (data->fixup) data->fixup(l2x0_base, cache_id, &fns); @@ -910,6 +875,8 @@ static void __init __l2c_init(const struct l2c_init_data *data, data->type, ways, l2x0_size >> 10); pr_info("%s: CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n", data->type, cache_id, aux); + + return 0; } void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) @@ -936,6 +903,10 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) break; } + /* Read back current (default) hardware configuration */ + if (data->save) + data->save(l2x0_base); + __l2c_init(data, aux_val, aux_mask, cache_id); } @@ -979,7 +950,7 @@ static int __init l2x0_cache_size_of_parse(const struct device_node *np, /* All these l2 caches have the same line = block size actually */ if (!line_size) { if (block_size) { - /* If linesize if not given, it is equal to blocksize */ + /* If linesize is not given, it is equal to blocksize */ line_size = block_size; } else { /* Fall back to known size */ @@ -1102,7 +1073,7 @@ static const struct l2c_init_data of_l2c210_data __initconst = { .flush_all = l2c210_flush_all, .disable = l2c_disable, .sync = l2c210_sync, - .resume = l2c210_resume, + .resume = l2c_resume, }, }; @@ -1120,7 +1091,7 @@ static const struct l2c_init_data of_l2c220_data __initconst = { .flush_all = l2c220_flush_all, .disable = l2c_disable, .sync = l2c220_sync, - .resume = l2c210_resume, + .resume = l2c_resume, }, }; @@ -1131,53 +1102,104 @@ static void __init l2c310_of_parse(const struct device_node *np, u32 tag[3] = { 0, 0, 0 }; u32 filter[2] = { 0, 0 }; u32 assoc; + u32 prefetch; + u32 val; int ret; of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag)); if (tag[0] && tag[1] && tag[2]) - writel_relaxed( + l2x0_saved_regs.tag_latency = L310_LATENCY_CTRL_RD(tag[0] - 1) | L310_LATENCY_CTRL_WR(tag[1] - 1) | - L310_LATENCY_CTRL_SETUP(tag[2] - 1), - l2x0_base + L310_TAG_LATENCY_CTRL); + L310_LATENCY_CTRL_SETUP(tag[2] - 1); of_property_read_u32_array(np, "arm,data-latency", data, ARRAY_SIZE(data)); if (data[0] && data[1] && data[2]) - writel_relaxed( + l2x0_saved_regs.data_latency = L310_LATENCY_CTRL_RD(data[0] - 1) | L310_LATENCY_CTRL_WR(data[1] - 1) | - L310_LATENCY_CTRL_SETUP(data[2] - 1), - l2x0_base + L310_DATA_LATENCY_CTRL); + L310_LATENCY_CTRL_SETUP(data[2] - 1); of_property_read_u32_array(np, "arm,filter-ranges", filter, ARRAY_SIZE(filter)); if (filter[1]) { - writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M), - l2x0_base + L310_ADDR_FILTER_END); - writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L310_ADDR_FILTER_EN, - l2x0_base + L310_ADDR_FILTER_START); + l2x0_saved_regs.filter_end = + ALIGN(filter[0] + filter[1], SZ_1M); + l2x0_saved_regs.filter_start = (filter[0] & ~(SZ_1M - 1)) + | L310_ADDR_FILTER_EN; } ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_512K); - if (ret) - return; + if (!ret) { + switch (assoc) { + case 16: + *aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK; + *aux_val |= L310_AUX_CTRL_ASSOCIATIVITY_16; + *aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK; + break; + case 8: + *aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK; + *aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK; + break; + default: + pr_err("L2C-310 OF cache associativity %d invalid, only 8 or 16 permitted\n", + assoc); + break; + } + } - switch (assoc) { - case 16: - *aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK; - *aux_val |= L310_AUX_CTRL_ASSOCIATIVITY_16; - *aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK; - break; - case 8: - *aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK; - *aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK; - break; - default: - pr_err("L2C-310 OF cache associativity %d invalid, only 8 or 16 permitted\n", - assoc); - break; + prefetch = l2x0_saved_regs.prefetch_ctrl; + + ret = of_property_read_u32(np, "arm,double-linefill", &val); + if (ret == 0) { + if (val) + prefetch |= L310_PREFETCH_CTRL_DBL_LINEFILL; + else + prefetch &= ~L310_PREFETCH_CTRL_DBL_LINEFILL; + } else if (ret != -EINVAL) { + pr_err("L2C-310 OF arm,double-linefill property value is missing\n"); + } + + ret = of_property_read_u32(np, "arm,double-linefill-incr", &val); + if (ret == 0) { + if (val) + prefetch |= L310_PREFETCH_CTRL_DBL_LINEFILL_INCR; + else + prefetch &= ~L310_PREFETCH_CTRL_DBL_LINEFILL_INCR; + } else if (ret != -EINVAL) { + pr_err("L2C-310 OF arm,double-linefill-incr property value is missing\n"); } + + ret = of_property_read_u32(np, "arm,double-linefill-wrap", &val); + if (ret == 0) { + if (!val) + prefetch |= L310_PREFETCH_CTRL_DBL_LINEFILL_WRAP; + else + prefetch &= ~L310_PREFETCH_CTRL_DBL_LINEFILL_WRAP; + } else if (ret != -EINVAL) { + pr_err("L2C-310 OF arm,double-linefill-wrap property value is missing\n"); + } + + ret = of_property_read_u32(np, "arm,prefetch-drop", &val); + if (ret == 0) { + if (val) + prefetch |= L310_PREFETCH_CTRL_PREFETCH_DROP; + else + prefetch &= ~L310_PREFETCH_CTRL_PREFETCH_DROP; + } else if (ret != -EINVAL) { + pr_err("L2C-310 OF arm,prefetch-drop property value is missing\n"); + } + + ret = of_property_read_u32(np, "arm,prefetch-offset", &val); + if (ret == 0) { + prefetch &= ~L310_PREFETCH_CTRL_OFFSET_MASK; + prefetch |= val & L310_PREFETCH_CTRL_OFFSET_MASK; + } else if (ret != -EINVAL) { + pr_err("L2C-310 OF arm,prefetch-offset property value is missing\n"); + } + + l2x0_saved_regs.prefetch_ctrl = prefetch; } static const struct l2c_init_data of_l2c310_data __initconst = { @@ -1188,6 +1210,7 @@ static const struct l2c_init_data of_l2c310_data __initconst = { .enable = l2c310_enable, .fixup = l2c310_fixup, .save = l2c310_save, + .configure = l2c310_configure, .outer_cache = { .inv_range = l2c210_inv_range, .clean_range = l2c210_clean_range, @@ -1216,6 +1239,7 @@ static const struct l2c_init_data of_l2c310_coherent_data __initconst = { .enable = l2c310_enable, .fixup = l2c310_fixup, .save = l2c310_save, + .configure = l2c310_configure, .outer_cache = { .inv_range = l2c210_inv_range, .clean_range = l2c210_clean_range, @@ -1231,7 +1255,7 @@ static const struct l2c_init_data of_l2c310_coherent_data __initconst = { * noninclusive, while the hardware cache range operations use * inclusive start and end addresses. */ -static unsigned long calc_range_end(unsigned long start, unsigned long end) +static unsigned long aurora_range_end(unsigned long start, unsigned long end) { /* * Limit the number of cache lines processed at once, @@ -1250,25 +1274,13 @@ static unsigned long calc_range_end(unsigned long start, unsigned long end) return end; } -/* - * Make sure 'start' and 'end' reference the same page, as L2 is PIPT - * and range operations only do a TLB lookup on the start address. - */ static void aurora_pa_range(unsigned long start, unsigned long end, - unsigned long offset) + unsigned long offset) { + void __iomem *base = l2x0_base; + unsigned long range_end; unsigned long flags; - raw_spin_lock_irqsave(&l2x0_lock, flags); - writel_relaxed(start, l2x0_base + AURORA_RANGE_BASE_ADDR_REG); - writel_relaxed(end, l2x0_base + offset); - raw_spin_unlock_irqrestore(&l2x0_lock, flags); - - cache_sync(); -} - -static void aurora_inv_range(unsigned long start, unsigned long end) -{ /* * round start and end adresses up to cache line size */ @@ -1276,15 +1288,24 @@ static void aurora_inv_range(unsigned long start, unsigned long end) end = ALIGN(end, CACHE_LINE_SIZE); /* - * Invalidate all full cache lines between 'start' and 'end'. + * perform operation on all full cache lines between 'start' and 'end' */ while (start < end) { - unsigned long range_end = calc_range_end(start, end); - aurora_pa_range(start, range_end - CACHE_LINE_SIZE, - AURORA_INVAL_RANGE_REG); + range_end = aurora_range_end(start, end); + + raw_spin_lock_irqsave(&l2x0_lock, flags); + writel_relaxed(start, base + AURORA_RANGE_BASE_ADDR_REG); + writel_relaxed(range_end - CACHE_LINE_SIZE, base + offset); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); + + writel_relaxed(0, base + AURORA_SYNC_REG); start = range_end; } } +static void aurora_inv_range(unsigned long start, unsigned long end) +{ + aurora_pa_range(start, end, AURORA_INVAL_RANGE_REG); +} static void aurora_clean_range(unsigned long start, unsigned long end) { @@ -1292,52 +1313,53 @@ static void aurora_clean_range(unsigned long start, unsigned long end) * If L2 is forced to WT, the L2 will always be clean and we * don't need to do anything here. */ - if (!l2_wt_override) { - start &= ~(CACHE_LINE_SIZE - 1); - end = ALIGN(end, CACHE_LINE_SIZE); - while (start != end) { - unsigned long range_end = calc_range_end(start, end); - aurora_pa_range(start, range_end - CACHE_LINE_SIZE, - AURORA_CLEAN_RANGE_REG); - start = range_end; - } - } + if (!l2_wt_override) + aurora_pa_range(start, end, AURORA_CLEAN_RANGE_REG); } static void aurora_flush_range(unsigned long start, unsigned long end) { - start &= ~(CACHE_LINE_SIZE - 1); - end = ALIGN(end, CACHE_LINE_SIZE); - while (start != end) { - unsigned long range_end = calc_range_end(start, end); - /* - * If L2 is forced to WT, the L2 will always be clean and we - * just need to invalidate. - */ - if (l2_wt_override) - aurora_pa_range(start, range_end - CACHE_LINE_SIZE, - AURORA_INVAL_RANGE_REG); - else - aurora_pa_range(start, range_end - CACHE_LINE_SIZE, - AURORA_FLUSH_RANGE_REG); - start = range_end; - } + if (l2_wt_override) + aurora_pa_range(start, end, AURORA_INVAL_RANGE_REG); + else + aurora_pa_range(start, end, AURORA_FLUSH_RANGE_REG); } -static void aurora_save(void __iomem *base) +static void aurora_flush_all(void) { - l2x0_saved_regs.ctrl = readl_relaxed(base + L2X0_CTRL); - l2x0_saved_regs.aux_ctrl = readl_relaxed(base + L2X0_AUX_CTRL); + void __iomem *base = l2x0_base; + unsigned long flags; + + /* clean all ways */ + raw_spin_lock_irqsave(&l2x0_lock, flags); + __l2c_op_way(base + L2X0_CLEAN_INV_WAY); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); + + writel_relaxed(0, base + AURORA_SYNC_REG); +} + +static void aurora_cache_sync(void) +{ + writel_relaxed(0, l2x0_base + AURORA_SYNC_REG); } -static void aurora_resume(void) +static void aurora_disable(void) { void __iomem *base = l2x0_base; + unsigned long flags; - if (!(readl(base + L2X0_CTRL) & L2X0_CTRL_EN)) { - writel_relaxed(l2x0_saved_regs.aux_ctrl, base + L2X0_AUX_CTRL); - writel_relaxed(l2x0_saved_regs.ctrl, base + L2X0_CTRL); - } + raw_spin_lock_irqsave(&l2x0_lock, flags); + __l2c_op_way(base + L2X0_CLEAN_INV_WAY); + writel_relaxed(0, base + AURORA_SYNC_REG); + l2c_write_sec(0, base, L2X0_CTRL); + dsb(st); + raw_spin_unlock_irqrestore(&l2x0_lock, flags); +} + +static void aurora_save(void __iomem *base) +{ + l2x0_saved_regs.ctrl = readl_relaxed(base + L2X0_CTRL); + l2x0_saved_regs.aux_ctrl = readl_relaxed(base + L2X0_AUX_CTRL); } /* @@ -1398,10 +1420,10 @@ static const struct l2c_init_data of_aurora_with_outer_data __initconst = { .inv_range = aurora_inv_range, .clean_range = aurora_clean_range, .flush_range = aurora_flush_range, - .flush_all = l2x0_flush_all, - .disable = l2x0_disable, - .sync = l2x0_cache_sync, - .resume = aurora_resume, + .flush_all = aurora_flush_all, + .disable = aurora_disable, + .sync = aurora_cache_sync, + .resume = l2c_resume, }, }; @@ -1414,7 +1436,7 @@ static const struct l2c_init_data of_aurora_no_outer_data __initconst = { .fixup = aurora_fixup, .save = aurora_save, .outer_cache = { - .resume = aurora_resume, + .resume = l2c_resume, }, }; @@ -1562,6 +1584,7 @@ static const struct l2c_init_data of_bcm_l2x0_data __initconst = { .of_parse = l2c310_of_parse, .enable = l2c310_enable, .save = l2c310_save, + .configure = l2c310_configure, .outer_cache = { .inv_range = bcm_inv_range, .clean_range = bcm_clean_range, @@ -1583,18 +1606,12 @@ static void __init tauros3_save(void __iomem *base) readl_relaxed(base + L310_PREFETCH_CTRL); } -static void tauros3_resume(void) +static void tauros3_configure(void __iomem *base) { - void __iomem *base = l2x0_base; - - if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) { - writel_relaxed(l2x0_saved_regs.aux2_ctrl, - base + TAUROS3_AUX2_CTRL); - writel_relaxed(l2x0_saved_regs.prefetch_ctrl, - base + L310_PREFETCH_CTRL); - - l2c_enable(base, l2x0_saved_regs.aux_ctrl, 8); - } + writel_relaxed(l2x0_saved_regs.aux2_ctrl, + base + TAUROS3_AUX2_CTRL); + writel_relaxed(l2x0_saved_regs.prefetch_ctrl, + base + L310_PREFETCH_CTRL); } static const struct l2c_init_data of_tauros3_data __initconst = { @@ -1603,9 +1620,10 @@ static const struct l2c_init_data of_tauros3_data __initconst = { .num_lock = 8, .enable = l2c_enable, .save = tauros3_save, + .configure = tauros3_configure, /* Tauros3 broadcasts L1 cache operations to L2 */ .outer_cache = { - .resume = tauros3_resume, + .resume = l2c_resume, }, }; @@ -1661,6 +1679,10 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) if (!of_property_read_bool(np, "cache-unified")) pr_err("L2C: device tree omits to specify unified cache\n"); + /* Read back current (default) hardware configuration */ + if (data->save) + data->save(l2x0_base); + /* L2 configuration can only be changed if the cache is disabled */ if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) if (data->of_parse) @@ -1671,8 +1693,6 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) else cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID); - __l2c_init(data, aux_val, aux_mask, cache_id); - - return 0; + return __l2c_init(data, aux_val, aux_mask, cache_id); } #endif diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 903dba064a03..c27447653903 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -171,7 +171,7 @@ static int __dma_supported(struct device *dev, u64 mask, bool warn) */ if (sizeof(mask) != sizeof(dma_addr_t) && mask > (dma_addr_t)~0 && - dma_to_pfn(dev, ~0) < max_pfn) { + dma_to_pfn(dev, ~0) < max_pfn - 1) { if (warn) { dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n", mask); @@ -1106,7 +1106,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, int i = 0; if (array_size <= PAGE_SIZE) - pages = kzalloc(array_size, gfp); + pages = kzalloc(array_size, GFP_KERNEL); else pages = vzalloc(array_size); if (!pages) diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index a982dc3190df..6333d9c17875 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -552,6 +552,7 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) pr_alert("Unhandled fault: %s (0x%03x) at 0x%08lx\n", inf->name, fsr, addr); + show_pte(current->mm, addr); info.si_signo = inf->sig; info.si_errno = 0; diff --git a/arch/arm/mm/hugetlbpage.c b/arch/arm/mm/hugetlbpage.c index 66781bf34077..c72412415093 100644 --- a/arch/arm/mm/hugetlbpage.c +++ b/arch/arm/mm/hugetlbpage.c @@ -36,12 +36,6 @@ * of type casting from pmd_t * to pte_t *. */ -struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address, - int write) -{ - return ERR_PTR(-EINVAL); -} - int pud_huge(pud_t pud) { return 0; diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 2495c8cb47ba..1609b022a72f 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -319,10 +319,7 @@ void __init arm_memblock_init(const struct machine_desc *mdesc) early_init_fdt_scan_reserved_mem(); - /* - * reserve memory for DMA contigouos allocations, - * must come from DMA area inside low memory - */ + /* reserve memory for DMA contiguous allocations */ dma_contiguous_reserve(arm_dma_limit); arm_memblock_steal_permitted = false; diff --git a/arch/arm/mm/pageattr.c b/arch/arm/mm/pageattr.c index 004e35cdcfff..cf30daff8932 100644 --- a/arch/arm/mm/pageattr.c +++ b/arch/arm/mm/pageattr.c @@ -49,7 +49,10 @@ static int change_memory_common(unsigned long addr, int numpages, WARN_ON_ONCE(1); } - if (!is_module_address(start) || !is_module_address(end - 1)) + if (start < MODULES_VADDR || start >= MODULES_END) + return -EINVAL; + + if (end < MODULES_VADDR || start >= MODULES_END) return -EINVAL; data.set_mask = set_mask; diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index 249379535be2..a3681f11dd9f 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -97,6 +97,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm) no_pte: pmd_free(mm, new_pmd); + mm_dec_nr_pmds(mm); no_pmd: pud_free(mm, new_pud); no_pud: @@ -130,9 +131,11 @@ void pgd_free(struct mm_struct *mm, pgd_t *pgd_base) pte = pmd_pgtable(*pmd); pmd_clear(pmd); pte_free(mm, pte); + atomic_long_dec(&mm->nr_ptes); no_pmd: pud_clear(pud); pmd_free(mm, pmd); + mm_dec_nr_pmds(mm); no_pud: pgd_clear(pgd); pud_free(mm, pud); @@ -152,6 +155,7 @@ no_pgd: pmd = pmd_offset(pud, 0); pud_clear(pud); pmd_free(mm, pmd); + mm_dec_nr_pmds(mm); pgd_clear(pgd); pud_free(mm, pud); } diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index ba1196c968d8..082b9f2f7e90 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -98,7 +98,7 @@ #endif #if !defined (CONFIG_ARM_LPAE) && \ (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\ - L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED + L_PTE_PRESENT) > L_PTE_SHARED #error Invalid Linux PTE bit settings #endif #endif /* CONFIG_MMU */ diff --git a/arch/arm/plat-iop/pmu.c b/arch/arm/plat-iop/pmu.c index ad9f9744a82d..c6d979ace524 100644 --- a/arch/arm/plat-iop/pmu.c +++ b/arch/arm/plat-iop/pmu.c @@ -24,7 +24,7 @@ static struct resource pmu_resource = { }; static struct platform_device pmu_device = { - .name = "arm-pmu", + .name = "xscale-pmu", .id = -1, .resource = &pmu_resource, .num_resources = 1, diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 24770e5a5081..6416e03b4482 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -151,14 +151,6 @@ static int omap_dma_in_1510_mode(void) #endif #ifdef CONFIG_ARCH_OMAP1 -static inline int get_gdma_dev(int req) -{ - u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4; - int shift = ((req - 1) % 5) * 6; - - return ((omap_readl(reg) >> shift) & 0x3f) + 1; -} - static inline void set_gdma_dev(int req, int dev) { u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4; diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 9bd2776e7d05..cb8e3d655d1a 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -236,13 +236,6 @@ config S3C_SETUP_CAMIF help Compile in common setup code for S3C CAMIF devices -# DMA - -config S3C_DMA - bool - help - Internal configuration for S3C DMA core - config SAMSUNG_PM_GPIO bool default y if GPIO_SAMSUNG && PM @@ -250,14 +243,6 @@ config SAMSUNG_PM_GPIO Include legacy GPIO power management code for platforms not using pinctrl-samsung driver. -config SAMSUNG_DMADEV - bool "Use legacy Samsung DMA abstraction" - depends on CPU_S5PV210 || ARCH_S3C64XX - select DMADEVICES - default y - help - Use DMA device engine for PL330 DMAC. - endif config S5P_DEV_MFC diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 87746c37f030..1a29ab1f446d 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -26,12 +26,6 @@ obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight.o obj-$(CONFIG_S3C_SETUP_CAMIF) += setup-camif.o -# DMA support - -obj-$(CONFIG_S3C_DMA) += dma.o s3c-dma-ops.o - -obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o - # PM support obj-$(CONFIG_PM_SLEEP) += pm-common.o diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c index 360618ee39e5..71333bb61013 100644 --- a/arch/arm/plat-samsung/cpu.c +++ b/arch/arm/plat-samsung/cpu.c @@ -40,10 +40,14 @@ void __init s3c64xx_init_cpu(void) } samsung_cpu_rev = 0; + + pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id); } void __init s5p_init_cpu(void __iomem *cpuid_addr) { samsung_cpu_id = __raw_readl(cpuid_addr); samsung_cpu_rev = samsung_cpu_id & 0xFF; + + pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id); } diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c deleted file mode 100644 index 886326ee6f6c..000000000000 --- a/arch/arm/plat-samsung/dma-ops.c +++ /dev/null @@ -1,146 +0,0 @@ -/* linux/arch/arm/plat-samsung/dma-ops.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung DMA Operations - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/amba/pl330.h> -#include <linux/scatterlist.h> -#include <linux/export.h> - -#include <mach/dma.h> - -#if defined(CONFIG_PL330_DMA) -#define dma_filter pl330_filter -#elif defined(CONFIG_S3C64XX_PL080) -#define dma_filter pl08x_filter_id -#endif - -static unsigned samsung_dmadev_request(enum dma_ch dma_ch, - struct samsung_dma_req *param, - struct device *dev, char *ch_name) -{ - dma_cap_mask_t mask; - - dma_cap_zero(mask); - dma_cap_set(param->cap, mask); - - if (dev->of_node) - return (unsigned)dma_request_slave_channel(dev, ch_name); - else - return (unsigned)dma_request_channel(mask, dma_filter, - (void *)dma_ch); -} - -static int samsung_dmadev_release(unsigned ch, void *param) -{ - dma_release_channel((struct dma_chan *)ch); - - return 0; -} - -static int samsung_dmadev_config(unsigned ch, - struct samsung_dma_config *param) -{ - struct dma_chan *chan = (struct dma_chan *)ch; - struct dma_slave_config slave_config; - - if (param->direction == DMA_DEV_TO_MEM) { - memset(&slave_config, 0, sizeof(struct dma_slave_config)); - slave_config.direction = param->direction; - slave_config.src_addr = param->fifo; - slave_config.src_addr_width = param->width; - slave_config.src_maxburst = 1; - dmaengine_slave_config(chan, &slave_config); - } else if (param->direction == DMA_MEM_TO_DEV) { - memset(&slave_config, 0, sizeof(struct dma_slave_config)); - slave_config.direction = param->direction; - slave_config.dst_addr = param->fifo; - slave_config.dst_addr_width = param->width; - slave_config.dst_maxburst = 1; - dmaengine_slave_config(chan, &slave_config); - } else { - pr_warn("unsupported direction\n"); - return -EINVAL; - } - - return 0; -} - -static int samsung_dmadev_prepare(unsigned ch, - struct samsung_dma_prep *param) -{ - struct scatterlist sg; - struct dma_chan *chan = (struct dma_chan *)ch; - struct dma_async_tx_descriptor *desc; - - switch (param->cap) { - case DMA_SLAVE: - sg_init_table(&sg, 1); - sg_dma_len(&sg) = param->len; - sg_set_page(&sg, pfn_to_page(PFN_DOWN(param->buf)), - param->len, offset_in_page(param->buf)); - sg_dma_address(&sg) = param->buf; - - desc = dmaengine_prep_slave_sg(chan, - &sg, 1, param->direction, DMA_PREP_INTERRUPT); - break; - case DMA_CYCLIC: - desc = dmaengine_prep_dma_cyclic(chan, param->buf, - param->len, param->period, param->direction, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - break; - default: - dev_err(&chan->dev->device, "unsupported format\n"); - return -EFAULT; - } - - if (!desc) { - dev_err(&chan->dev->device, "cannot prepare cyclic dma\n"); - return -EFAULT; - } - - desc->callback = param->fp; - desc->callback_param = param->fp_param; - - dmaengine_submit((struct dma_async_tx_descriptor *)desc); - - return 0; -} - -static inline int samsung_dmadev_trigger(unsigned ch) -{ - dma_async_issue_pending((struct dma_chan *)ch); - - return 0; -} - -static inline int samsung_dmadev_flush(unsigned ch) -{ - return dmaengine_terminate_all((struct dma_chan *)ch); -} - -static struct samsung_dma_ops dmadev_ops = { - .request = samsung_dmadev_request, - .release = samsung_dmadev_release, - .config = samsung_dmadev_config, - .prepare = samsung_dmadev_prepare, - .trigger = samsung_dmadev_trigger, - .started = NULL, - .flush = samsung_dmadev_flush, - .stop = samsung_dmadev_flush, -}; - -void *samsung_dmadev_get_ops(void) -{ - return &dmadev_ops; -} -EXPORT_SYMBOL(samsung_dmadev_get_ops); diff --git a/arch/arm/plat-samsung/dma.c b/arch/arm/plat-samsung/dma.c deleted file mode 100644 index 6143aa147688..000000000000 --- a/arch/arm/plat-samsung/dma.c +++ /dev/null @@ -1,84 +0,0 @@ -/* linux/arch/arm/plat-samsung/dma.c - * - * Copyright (c) 2003-2009 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C DMA core - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct s3c2410_dma_buf; - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/errno.h> - -#include <mach/dma.h> -#include <mach/irqs.h> - -/* dma channel state information */ -struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS]; -struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX]; - -/* s3c_dma_lookup_channel - * - * change the dma channel number given into a real dma channel id -*/ - -struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel) -{ - if (channel & DMACH_LOW_LEVEL) - return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL]; - else - return s3c_dma_chan_map[channel]; -} - -/* do we need to protect the settings of the fields from - * irq? -*/ - -int s3c2410_dma_set_opfn(enum dma_ch channel, s3c2410_dma_opfn_t rtn) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn); - - chan->op_fn = rtn; - - return 0; -} -EXPORT_SYMBOL(s3c2410_dma_set_opfn); - -int s3c2410_dma_set_buffdone_fn(enum dma_ch channel, s3c2410_dma_cbfn_t rtn) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - - if (chan == NULL) - return -EINVAL; - - pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn); - - chan->callback_fn = rtn; - - return 0; -} -EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); - -int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - - if (chan == NULL) - return -EINVAL; - - chan->flags = flags; - return 0; -} -EXPORT_SYMBOL(s3c2410_dma_setflags); diff --git a/arch/arm/plat-samsung/include/plat/dma-core.h b/arch/arm/plat-samsung/include/plat/dma-core.h deleted file mode 100644 index 32ff2a92cb3c..000000000000 --- a/arch/arm/plat-samsung/include/plat/dma-core.h +++ /dev/null @@ -1,22 +0,0 @@ -/* arch/arm/plat-s3c/include/plat/dma.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Samsung S3C DMA core support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -extern struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel); - -extern struct s3c2410_dma_chan *s3c_dma_chan_map[]; - -/* the currently allocated channel information */ -extern struct s3c2410_dma_chan s3c2410_chans[]; - - diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h deleted file mode 100644 index ce6d7634b6cb..000000000000 --- a/arch/arm/plat-samsung/include/plat/dma-ops.h +++ /dev/null @@ -1,69 +0,0 @@ -/* arch/arm/plat-samsung/include/plat/dma-ops.h - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung DMA support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __SAMSUNG_DMA_OPS_H_ -#define __SAMSUNG_DMA_OPS_H_ __FILE__ - -#include <linux/dmaengine.h> -#include <mach/dma.h> - -struct samsung_dma_req { - enum dma_transaction_type cap; - struct s3c2410_dma_client *client; -}; - -struct samsung_dma_prep { - enum dma_transaction_type cap; - enum dma_transfer_direction direction; - dma_addr_t buf; - unsigned long period; - unsigned long len; - void (*fp)(void *data); - void *fp_param; -}; - -struct samsung_dma_config { - enum dma_transfer_direction direction; - enum dma_slave_buswidth width; - dma_addr_t fifo; -}; - -struct samsung_dma_ops { - unsigned (*request)(enum dma_ch ch, struct samsung_dma_req *param, - struct device *dev, char *ch_name); - int (*release)(unsigned ch, void *param); - int (*config)(unsigned ch, struct samsung_dma_config *param); - int (*prepare)(unsigned ch, struct samsung_dma_prep *param); - int (*trigger)(unsigned ch); - int (*started)(unsigned ch); - int (*flush)(unsigned ch); - int (*stop)(unsigned ch); -}; - -extern void *samsung_dmadev_get_ops(void); -extern void *s3c_dma_get_ops(void); - -static inline void *__samsung_dma_get_ops(void) -{ - if (samsung_dma_is_dmadev()) - return samsung_dmadev_get_ops(); - else - return s3c_dma_get_ops(); -} - -/* - * samsung_dma_get_ops - * get the set of samsung dma operations - */ -#define samsung_dma_get_ops() __samsung_dma_get_ops() - -#endif /* __SAMSUNG_DMA_OPS_H_ */ diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h deleted file mode 100644 index abe07fae71db..000000000000 --- a/arch/arm/plat-samsung/include/plat/dma-pl330.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __DMA_PL330_H_ -#define __DMA_PL330_H_ __FILE__ - -/* - * PL330 can assign any channel to communicate with - * any of the peripherals attched to the DMAC. - * For the sake of consistency across client drivers, - * We keep the channel names unchanged and only add - * missing peripherals are added. - * Order is not important since DMA PL330 API driver - * use these just as IDs. - */ -enum dma_ch { - DMACH_UART0_RX = 0, - DMACH_UART0_TX, - DMACH_UART1_RX, - DMACH_UART1_TX, - DMACH_UART2_RX, - DMACH_UART2_TX, - DMACH_UART3_RX, - DMACH_UART3_TX, - DMACH_UART4_RX, - DMACH_UART4_TX, - DMACH_UART5_RX, - DMACH_UART5_TX, - DMACH_USI_RX, - DMACH_USI_TX, - DMACH_IRDA, - DMACH_I2S0_RX, - DMACH_I2S0_TX, - DMACH_I2S0S_TX, - DMACH_I2S1_RX, - DMACH_I2S1_TX, - DMACH_I2S2_RX, - DMACH_I2S2_TX, - DMACH_SPI0_RX, - DMACH_SPI0_TX, - DMACH_SPI1_RX, - DMACH_SPI1_TX, - DMACH_SPI2_RX, - DMACH_SPI2_TX, - DMACH_AC97_MICIN, - DMACH_AC97_PCMIN, - DMACH_AC97_PCMOUT, - DMACH_EXTERNAL, - DMACH_PWM, - DMACH_SPDIF, - DMACH_HSI_RX, - DMACH_HSI_TX, - DMACH_PCM0_TX, - DMACH_PCM0_RX, - DMACH_PCM1_TX, - DMACH_PCM1_RX, - DMACH_PCM2_TX, - DMACH_PCM2_RX, - DMACH_MSM_REQ3, - DMACH_MSM_REQ2, - DMACH_MSM_REQ1, - DMACH_MSM_REQ0, - DMACH_SLIMBUS0_RX, - DMACH_SLIMBUS0_TX, - DMACH_SLIMBUS0AUX_RX, - DMACH_SLIMBUS0AUX_TX, - DMACH_SLIMBUS1_RX, - DMACH_SLIMBUS1_TX, - DMACH_SLIMBUS2_RX, - DMACH_SLIMBUS2_TX, - DMACH_SLIMBUS3_RX, - DMACH_SLIMBUS3_TX, - DMACH_SLIMBUS4_RX, - DMACH_SLIMBUS4_TX, - DMACH_SLIMBUS5_RX, - DMACH_SLIMBUS5_TX, - DMACH_MIPI_HSI0, - DMACH_MIPI_HSI1, - DMACH_MIPI_HSI2, - DMACH_MIPI_HSI3, - DMACH_MIPI_HSI4, - DMACH_MIPI_HSI5, - DMACH_MIPI_HSI6, - DMACH_MIPI_HSI7, - DMACH_DISP1, - DMACH_MTOM_0, - DMACH_MTOM_1, - DMACH_MTOM_2, - DMACH_MTOM_3, - DMACH_MTOM_4, - DMACH_MTOM_5, - DMACH_MTOM_6, - DMACH_MTOM_7, - /* END Marker, also used to denote a reserved channel */ - DMACH_MAX, -}; - -struct s3c2410_dma_client { - char *name; -}; - -static inline bool samsung_dma_has_circular(void) -{ - return true; -} - -static inline bool samsung_dma_is_dmadev(void) -{ - return true; -} - -#include <plat/dma-ops.h> - -#endif /* __DMA_PL330_H_ */ diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h deleted file mode 100644 index bd3a6db14cbb..000000000000 --- a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h +++ /dev/null @@ -1,73 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h - * - * Copyright (C) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Samsung S3C24XX DMA support - per SoC functions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <plat/dma-core.h> - -extern struct bus_type dma_subsys; -extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS]; - -#define DMA_CH_VALID (1<<31) -#define DMA_CH_NEVER (1<<30) - -/* struct s3c24xx_dma_map - * - * this holds the mapping information for the channel selected - * to be connected to the specified device -*/ - -struct s3c24xx_dma_map { - const char *name; - - unsigned long channels[S3C_DMA_CHANNELS]; -}; - -struct s3c24xx_dma_selection { - struct s3c24xx_dma_map *map; - unsigned long map_size; - unsigned long dcon_mask; - - void (*select)(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map); -}; - -extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel); - -/* struct s3c24xx_dma_order_ch - * - * channel map for one of the `enum dma_ch` dma channels. the list - * entry contains a set of low-level channel numbers, orred with - * DMA_CH_VALID, which are checked in the order in the array. -*/ - -struct s3c24xx_dma_order_ch { - unsigned int list[S3C_DMA_CHANNELS]; /* list of channels */ - unsigned int flags; /* flags */ -}; - -/* struct s3c24xx_dma_order - * - * information provided by either the core or the board to give the - * dma system a hint on how to allocate channels -*/ - -struct s3c24xx_dma_order { - struct s3c24xx_dma_order_ch channels[DMACH_MAX]; -}; - -extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map); - -/* DMA init code, called from the cpu support code */ - -extern int s3c2410_dma_init(void); - -extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq, - unsigned int stride); diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h deleted file mode 100644 index 7b02143ccd9a..000000000000 --- a/arch/arm/plat-samsung/include/plat/dma.h +++ /dev/null @@ -1,130 +0,0 @@ -/* arch/arm/plat-samsung/include/plat/dma.h - * - * Copyright (C) 2003-2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Samsung S3C DMA support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_DMA_H -#define __PLAT_DMA_H - -#include <linux/dma-mapping.h> - -enum s3c2410_dma_buffresult { - S3C2410_RES_OK, - S3C2410_RES_ERR, - S3C2410_RES_ABORT -}; - -/* enum s3c2410_chan_op - * - * operation codes passed to the DMA code by the user, and also used - * to inform the current channel owner of any changes to the system state -*/ - -enum s3c2410_chan_op { - S3C2410_DMAOP_START, - S3C2410_DMAOP_STOP, - S3C2410_DMAOP_PAUSE, - S3C2410_DMAOP_RESUME, - S3C2410_DMAOP_FLUSH, - S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */ - S3C2410_DMAOP_STARTED, /* indicate channel started */ -}; - -struct s3c2410_dma_client { - char *name; -}; - -struct s3c2410_dma_chan; -enum dma_ch; - -/* s3c2410_dma_cbfn_t - * - * buffer callback routine type -*/ - -typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *, - void *buf, int size, - enum s3c2410_dma_buffresult result); - -typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *, - enum s3c2410_chan_op ); - - - -/* s3c2410_dma_request - * - * request a dma channel exclusivley -*/ - -extern int s3c2410_dma_request(enum dma_ch channel, - struct s3c2410_dma_client *, void *dev); - - -/* s3c2410_dma_ctrl - * - * change the state of the dma channel -*/ - -extern int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op); - -/* s3c2410_dma_setflags - * - * set the channel's flags to a given state -*/ - -extern int s3c2410_dma_setflags(enum dma_ch channel, - unsigned int flags); - -/* s3c2410_dma_free - * - * free the dma channel (will also abort any outstanding operations) -*/ - -extern int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *); - -/* s3c2410_dma_enqueue - * - * place the given buffer onto the queue of operations for the channel. - * The buffer must be allocated from dma coherent memory, or the Dcache/WB - * drained before the buffer is given to the DMA system. -*/ - -extern int s3c2410_dma_enqueue(enum dma_ch channel, void *id, - dma_addr_t data, int size); - -/* s3c2410_dma_config - * - * configure the dma channel -*/ - -extern int s3c2410_dma_config(enum dma_ch channel, int xferunit); - -/* s3c2410_dma_devconfig - * - * configure the device we're talking to -*/ - -extern int s3c2410_dma_devconfig(enum dma_ch channel, - enum dma_data_direction source, unsigned long devaddr); - -/* s3c2410_dma_getposition - * - * get the position that the dma transfer is currently at -*/ - -extern int s3c2410_dma_getposition(enum dma_ch channel, - dma_addr_t *src, dma_addr_t *dest); - -extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn); -extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn); - -#include <plat/dma-ops.h> - -#endif diff --git a/arch/arm/plat-samsung/include/plat/regs-dma.h b/arch/arm/plat-samsung/include/plat/regs-dma.h deleted file mode 100644 index a7d622ef16af..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-dma.h +++ /dev/null @@ -1,151 +0,0 @@ -/* arch/arm/plat-samsung/include/plat/regs-dma.h - * - * Copyright (C) 2003-2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Samsung S3C24XX DMA support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_REGS_DMA_H -#define __ASM_PLAT_REGS_DMA_H __FILE__ - -#define S3C2410_DMA_DISRC (0x00) -#define S3C2410_DMA_DISRCC (0x04) -#define S3C2410_DMA_DIDST (0x08) -#define S3C2410_DMA_DIDSTC (0x0C) -#define S3C2410_DMA_DCON (0x10) -#define S3C2410_DMA_DSTAT (0x14) -#define S3C2410_DMA_DCSRC (0x18) -#define S3C2410_DMA_DCDST (0x1C) -#define S3C2410_DMA_DMASKTRIG (0x20) -#define S3C2412_DMA_DMAREQSEL (0x24) -#define S3C2443_DMA_DMAREQSEL (0x24) - -#define S3C2410_DISRCC_INC (1 << 0) -#define S3C2410_DISRCC_APB (1 << 1) - -#define S3C2410_DMASKTRIG_STOP (1 << 2) -#define S3C2410_DMASKTRIG_ON (1 << 1) -#define S3C2410_DMASKTRIG_SWTRIG (1 << 0) - -#define S3C2410_DCON_DEMAND (0 << 31) -#define S3C2410_DCON_HANDSHAKE (1 << 31) -#define S3C2410_DCON_SYNC_PCLK (0 << 30) -#define S3C2410_DCON_SYNC_HCLK (1 << 30) - -#define S3C2410_DCON_INTREQ (1 << 29) - -#define S3C2410_DCON_CH0_XDREQ0 (0 << 24) -#define S3C2410_DCON_CH0_UART0 (1 << 24) -#define S3C2410_DCON_CH0_SDI (2 << 24) -#define S3C2410_DCON_CH0_TIMER (3 << 24) -#define S3C2410_DCON_CH0_USBEP1 (4 << 24) - -#define S3C2410_DCON_CH1_XDREQ1 (0 << 24) -#define S3C2410_DCON_CH1_UART1 (1 << 24) -#define S3C2410_DCON_CH1_I2SSDI (2 << 24) -#define S3C2410_DCON_CH1_SPI (3 << 24) -#define S3C2410_DCON_CH1_USBEP2 (4 << 24) - -#define S3C2410_DCON_CH2_I2SSDO (0 << 24) -#define S3C2410_DCON_CH2_I2SSDI (1 << 24) -#define S3C2410_DCON_CH2_SDI (2 << 24) -#define S3C2410_DCON_CH2_TIMER (3 << 24) -#define S3C2410_DCON_CH2_USBEP3 (4 << 24) - -#define S3C2410_DCON_CH3_UART2 (0 << 24) -#define S3C2410_DCON_CH3_SDI (1 << 24) -#define S3C2410_DCON_CH3_SPI (2 << 24) -#define S3C2410_DCON_CH3_TIMER (3 << 24) -#define S3C2410_DCON_CH3_USBEP4 (4 << 24) - -#define S3C2410_DCON_SRCSHIFT (24) -#define S3C2410_DCON_SRCMASK (7 << 24) - -#define S3C2410_DCON_BYTE (0 << 20) -#define S3C2410_DCON_HALFWORD (1 << 20) -#define S3C2410_DCON_WORD (2 << 20) - -#define S3C2410_DCON_AUTORELOAD (0 << 22) -#define S3C2410_DCON_NORELOAD (1 << 22) -#define S3C2410_DCON_HWTRIG (1 << 23) - -#ifdef CONFIG_CPU_S3C2440 - -#define S3C2440_DIDSTC_CHKINT (1 << 2) - -#define S3C2440_DCON_CH0_I2SSDO (5 << 24) -#define S3C2440_DCON_CH0_PCMIN (6 << 24) - -#define S3C2440_DCON_CH1_PCMOUT (5 << 24) -#define S3C2440_DCON_CH1_SDI (6 << 24) - -#define S3C2440_DCON_CH2_PCMIN (5 << 24) -#define S3C2440_DCON_CH2_MICIN (6 << 24) - -#define S3C2440_DCON_CH3_MICIN (5 << 24) -#define S3C2440_DCON_CH3_PCMOUT (6 << 24) -#endif /* CONFIG_CPU_S3C2440 */ - -#ifdef CONFIG_CPU_S3C2412 - -#define S3C2412_DMAREQSEL_SRC(x) ((x) << 1) - -#define S3C2412_DMAREQSEL_HW (1) - -#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0) -#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1) -#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2) -#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3) -#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4) -#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5) -#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9) -#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10) -#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13) -#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14) -#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15) -#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16) -#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17) -#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18) -#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19) -#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20) -#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21) -#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22) -#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23) -#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24) -#endif /* CONFIG_CPU_S3C2412 */ - -#if defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2443) - -#define S3C2443_DMAREQSEL_SRC(x) ((x) << 1) - -#define S3C2443_DMAREQSEL_HW (1) - -#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0) -#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1) -#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2) -#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3) -#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4) -#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5) -#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9) -#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10) -#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17) -#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18) -#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19) -#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20) -#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21) -#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22) -#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23) -#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24) -#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25) -#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26) -#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27) -#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28) -#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29) -#endif /* CONFIG_CPU_S3C2443 */ - -#endif /* __ASM_PLAT_REGS_DMA_H */ diff --git a/arch/arm/plat-samsung/s3c-dma-ops.c b/arch/arm/plat-samsung/s3c-dma-ops.c deleted file mode 100644 index 98b10ba67dc7..000000000000 --- a/arch/arm/plat-samsung/s3c-dma-ops.c +++ /dev/null @@ -1,146 +0,0 @@ -/* linux/arch/arm/plat-samsung/s3c-dma-ops.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung S3C-DMA Operations - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/slab.h> -#include <linux/types.h> -#include <linux/export.h> - -#include <mach/dma.h> - -struct cb_data { - void (*fp) (void *); - void *fp_param; - unsigned ch; - struct list_head node; -}; - -static LIST_HEAD(dma_list); - -static void s3c_dma_cb(struct s3c2410_dma_chan *channel, void *param, - int size, enum s3c2410_dma_buffresult res) -{ - struct cb_data *data = param; - - data->fp(data->fp_param); -} - -static unsigned s3c_dma_request(enum dma_ch dma_ch, - struct samsung_dma_req *param, - struct device *dev, char *ch_name) -{ - struct cb_data *data; - - if (s3c2410_dma_request(dma_ch, param->client, NULL) < 0) { - s3c2410_dma_free(dma_ch, param->client); - return 0; - } - - if (param->cap == DMA_CYCLIC) - s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR); - - data = kzalloc(sizeof(struct cb_data), GFP_KERNEL); - data->ch = dma_ch; - list_add_tail(&data->node, &dma_list); - - return (unsigned)dma_ch; -} - -static int s3c_dma_release(unsigned ch, void *param) -{ - struct cb_data *data; - - list_for_each_entry(data, &dma_list, node) - if (data->ch == ch) - break; - list_del(&data->node); - - s3c2410_dma_free(ch, param); - kfree(data); - - return 0; -} - -static int s3c_dma_config(unsigned ch, struct samsung_dma_config *param) -{ - s3c2410_dma_devconfig(ch, param->direction, param->fifo); - s3c2410_dma_config(ch, param->width); - - return 0; -} - -static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep *param) -{ - struct cb_data *data; - dma_addr_t pos = param->buf; - dma_addr_t end = param->buf + param->len; - - list_for_each_entry(data, &dma_list, node) - if (data->ch == ch) - break; - - if (!data->fp) { - s3c2410_dma_set_buffdone_fn(ch, s3c_dma_cb); - data->fp = param->fp; - data->fp_param = param->fp_param; - } - - if (param->cap != DMA_CYCLIC) { - s3c2410_dma_enqueue(ch, (void *)data, param->buf, param->len); - return 0; - } - - while (pos < end) { - s3c2410_dma_enqueue(ch, (void *)data, pos, param->period); - pos += param->period; - } - - return 0; -} - -static inline int s3c_dma_trigger(unsigned ch) -{ - return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_START); -} - -static inline int s3c_dma_started(unsigned ch) -{ - return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STARTED); -} - -static inline int s3c_dma_flush(unsigned ch) -{ - return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_FLUSH); -} - -static inline int s3c_dma_stop(unsigned ch) -{ - return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STOP); -} - -static struct samsung_dma_ops s3c_dma_ops = { - .request = s3c_dma_request, - .release = s3c_dma_release, - .config = s3c_dma_config, - .prepare = s3c_dma_prepare, - .trigger = s3c_dma_trigger, - .started = s3c_dma_started, - .flush = s3c_dma_flush, - .stop = s3c_dma_stop, -}; - -void *s3c_dma_get_ops(void) -{ - return &s3c_dma_ops; -} -EXPORT_SYMBOL(s3c_dma_get_ops); diff --git a/arch/arm/probes/Makefile b/arch/arm/probes/Makefile new file mode 100644 index 000000000000..aa1f8590dcdd --- /dev/null +++ b/arch/arm/probes/Makefile @@ -0,0 +1,7 @@ +obj-$(CONFIG_UPROBES) += decode.o decode-arm.o uprobes/ +obj-$(CONFIG_KPROBES) += decode.o kprobes/ +ifdef CONFIG_THUMB2_KERNEL +obj-$(CONFIG_KPROBES) += decode-thumb.o +else +obj-$(CONFIG_KPROBES) += decode-arm.o +endif diff --git a/arch/arm/kernel/probes-arm.c b/arch/arm/probes/decode-arm.c index 8eaef81d8344..f72c33a2dcfb 100644 --- a/arch/arm/kernel/probes-arm.c +++ b/arch/arm/probes/decode-arm.c @@ -1,5 +1,6 @@ /* - * arch/arm/kernel/probes-arm.c + * + * arch/arm/probes/decode-arm.c * * Some code moved here from arch/arm/kernel/kprobes-arm.c * @@ -20,8 +21,8 @@ #include <linux/stddef.h> #include <linux/ptrace.h> -#include "probes.h" -#include "probes-arm.h" +#include "decode.h" +#include "decode-arm.h" #define sign_extend(x, signbit) ((x) | (0 - ((x) & (1 << (signbit))))) @@ -369,17 +370,17 @@ static const union decode_item arm_cccc_001x_table[] = { /* MOVW cccc 0011 0000 xxxx xxxx xxxx xxxx xxxx */ /* MOVT cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx */ - DECODE_EMULATEX (0x0fb00000, 0x03000000, PROBES_DATA_PROCESSING_IMM, + DECODE_EMULATEX (0x0fb00000, 0x03000000, PROBES_MOV_HALFWORD, REGS(0, NOPC, 0, 0, 0)), /* YIELD cccc 0011 0010 0000 xxxx xxxx 0000 0001 */ DECODE_OR (0x0fff00ff, 0x03200001), /* SEV cccc 0011 0010 0000 xxxx xxxx 0000 0100 */ - DECODE_EMULATE (0x0fff00ff, 0x03200004, PROBES_EMULATE_NONE), + DECODE_EMULATE (0x0fff00ff, 0x03200004, PROBES_SEV), /* NOP cccc 0011 0010 0000 xxxx xxxx 0000 0000 */ /* WFE cccc 0011 0010 0000 xxxx xxxx 0000 0010 */ /* WFI cccc 0011 0010 0000 xxxx xxxx 0000 0011 */ - DECODE_SIMULATE (0x0fff00fc, 0x03200000, PROBES_SIMULATE_NOP), + DECODE_SIMULATE (0x0fff00fc, 0x03200000, PROBES_WFE), /* DBG cccc 0011 0010 0000 xxxx xxxx ffff xxxx */ /* unallocated hints cccc 0011 0010 0000 xxxx xxxx xxxx xxxx */ /* MSR (immediate) cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx */ @@ -725,10 +726,11 @@ static void __kprobes arm_singlestep(probes_opcode_t insn, */ enum probes_insn __kprobes arm_probes_decode_insn(probes_opcode_t insn, struct arch_probes_insn *asi, - bool emulate, const union decode_action *actions) + bool emulate, const union decode_action *actions, + const struct decode_checker *checkers[]) { asi->insn_singlestep = arm_singlestep; asi->insn_check_cc = probes_condition_checks[insn>>28]; return probes_decode_insn(insn, asi, probes_decode_arm_table, false, - emulate, actions); + emulate, actions, checkers); } diff --git a/arch/arm/kernel/probes-arm.h b/arch/arm/probes/decode-arm.h index ace6572f6e26..b3b80f6d414b 100644 --- a/arch/arm/kernel/probes-arm.h +++ b/arch/arm/probes/decode-arm.h @@ -1,5 +1,5 @@ /* - * arch/arm/kernel/probes-arm.h + * arch/arm/probes/decode-arm.h * * Copyright 2013 Linaro Ltd. * Written by: David A. Long @@ -15,9 +15,9 @@ #ifndef _ARM_KERNEL_PROBES_ARM_H #define _ARM_KERNEL_PROBES_ARM_H +#include "decode.h" + enum probes_arm_action { - PROBES_EMULATE_NONE, - PROBES_SIMULATE_NOP, PROBES_PRELOAD_IMM, PROBES_PRELOAD_REG, PROBES_BRANCH_IMM, @@ -68,6 +68,7 @@ extern const union decode_item probes_decode_arm_table[]; enum probes_insn arm_probes_decode_insn(probes_opcode_t, struct arch_probes_insn *, bool emulate, - const union decode_action *actions); + const union decode_action *actions, + const struct decode_checker *checkers[]); #endif diff --git a/arch/arm/kernel/probes-thumb.c b/arch/arm/probes/decode-thumb.c index 4131351e812f..985e7dd4cac6 100644 --- a/arch/arm/kernel/probes-thumb.c +++ b/arch/arm/probes/decode-thumb.c @@ -1,5 +1,5 @@ /* - * arch/arm/kernel/probes-thumb.c + * arch/arm/probes/decode-thumb.c * * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. * @@ -12,8 +12,8 @@ #include <linux/kernel.h> #include <linux/module.h> -#include "probes.h" -#include "probes-thumb.h" +#include "decode.h" +#include "decode-thumb.h" static const union decode_item t32_table_1110_100x_x0xx[] = { @@ -863,20 +863,22 @@ static void __kprobes thumb32_singlestep(probes_opcode_t opcode, enum probes_insn __kprobes thumb16_probes_decode_insn(probes_opcode_t insn, struct arch_probes_insn *asi, - bool emulate, const union decode_action *actions) + bool emulate, const union decode_action *actions, + const struct decode_checker *checkers[]) { asi->insn_singlestep = thumb16_singlestep; asi->insn_check_cc = thumb_check_cc; return probes_decode_insn(insn, asi, probes_decode_thumb16_table, true, - emulate, actions); + emulate, actions, checkers); } enum probes_insn __kprobes thumb32_probes_decode_insn(probes_opcode_t insn, struct arch_probes_insn *asi, - bool emulate, const union decode_action *actions) + bool emulate, const union decode_action *actions, + const struct decode_checker *checkers[]) { asi->insn_singlestep = thumb32_singlestep; asi->insn_check_cc = thumb_check_cc; return probes_decode_insn(insn, asi, probes_decode_thumb32_table, true, - emulate, actions); + emulate, actions, checkers); } diff --git a/arch/arm/kernel/probes-thumb.h b/arch/arm/probes/decode-thumb.h index 7c6f6ebe514f..8457add0a2d8 100644 --- a/arch/arm/kernel/probes-thumb.h +++ b/arch/arm/probes/decode-thumb.h @@ -1,5 +1,5 @@ /* - * arch/arm/kernel/probes-thumb.h + * arch/arm/probes/decode-thumb.h * * Copyright 2013 Linaro Ltd. * Written by: David A. Long @@ -15,6 +15,8 @@ #ifndef _ARM_KERNEL_PROBES_THUMB_H #define _ARM_KERNEL_PROBES_THUMB_H +#include "decode.h" + /* * True if current instruction is in an IT block. */ @@ -89,9 +91,11 @@ extern const union decode_item probes_decode_thumb16_table[]; enum probes_insn __kprobes thumb16_probes_decode_insn(probes_opcode_t insn, struct arch_probes_insn *asi, - bool emulate, const union decode_action *actions); + bool emulate, const union decode_action *actions, + const struct decode_checker *checkers[]); enum probes_insn __kprobes thumb32_probes_decode_insn(probes_opcode_t insn, struct arch_probes_insn *asi, - bool emulate, const union decode_action *actions); + bool emulate, const union decode_action *actions, + const struct decode_checker *checkers[]); #endif diff --git a/arch/arm/kernel/probes.c b/arch/arm/probes/decode.c index a8ab540d7e73..880ebe0cdf19 100644 --- a/arch/arm/kernel/probes.c +++ b/arch/arm/probes/decode.c @@ -1,5 +1,5 @@ /* - * arch/arm/kernel/probes.c + * arch/arm/probes/decode.c * * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. * @@ -17,7 +17,7 @@ #include <asm/ptrace.h> #include <linux/bug.h> -#include "probes.h" +#include "decode.h" #ifndef find_str_pc_offset @@ -342,6 +342,31 @@ static const int decode_struct_sizes[NUM_DECODE_TYPES] = { [DECODE_TYPE_REJECT] = sizeof(struct decode_reject) }; +static int run_checkers(const struct decode_checker *checkers[], + int action, probes_opcode_t insn, + struct arch_probes_insn *asi, + const struct decode_header *h) +{ + const struct decode_checker **p; + + if (!checkers) + return INSN_GOOD; + + p = checkers; + while (*p != NULL) { + int retval; + probes_check_t *checker_func = (*p)[action].checker; + + retval = INSN_GOOD; + if (checker_func) + retval = checker_func(insn, asi, h); + if (retval == INSN_REJECTED) + return retval; + p++; + } + return INSN_GOOD; +} + /* * probes_decode_insn operates on data tables in order to decode an ARM * architecture instruction onto which a kprobe has been placed. @@ -388,11 +413,34 @@ static const int decode_struct_sizes[NUM_DECODE_TYPES] = { int __kprobes probes_decode_insn(probes_opcode_t insn, struct arch_probes_insn *asi, const union decode_item *table, bool thumb, - bool emulate, const union decode_action *actions) + bool emulate, const union decode_action *actions, + const struct decode_checker *checkers[]) { const struct decode_header *h = (struct decode_header *)table; const struct decode_header *next; bool matched = false; + /* + * @insn can be modified by decode_regs. Save its original + * value for checkers. + */ + probes_opcode_t origin_insn = insn; + + /* + * stack_space is initialized to 0 here. Checker functions + * should update is value if they find this is a stack store + * instruction: positive value means bytes of stack usage, + * negitive value means unable to determine stack usage + * statically. For instruction doesn't store to stack, checker + * do nothing with it. + */ + asi->stack_space = 0; + + /* + * Similarly to stack_space, register_usage_flags is filled by + * checkers. Its default value is set to ~0, which is 'all + * registers are used', to prevent any potential optimization. + */ + asi->register_usage_flags = ~0UL; if (emulate) insn = prepare_emulated_insn(insn, asi, thumb); @@ -422,24 +470,41 @@ probes_decode_insn(probes_opcode_t insn, struct arch_probes_insn *asi, } case DECODE_TYPE_CUSTOM: { + int err; struct decode_custom *d = (struct decode_custom *)h; - return actions[d->decoder.action].decoder(insn, asi, h); + int action = d->decoder.action; + + err = run_checkers(checkers, action, origin_insn, asi, h); + if (err == INSN_REJECTED) + return INSN_REJECTED; + return actions[action].decoder(insn, asi, h); } case DECODE_TYPE_SIMULATE: { + int err; struct decode_simulate *d = (struct decode_simulate *)h; - asi->insn_handler = actions[d->handler.action].handler; + int action = d->handler.action; + + err = run_checkers(checkers, action, origin_insn, asi, h); + if (err == INSN_REJECTED) + return INSN_REJECTED; + asi->insn_handler = actions[action].handler; return INSN_GOOD_NO_SLOT; } case DECODE_TYPE_EMULATE: { + int err; struct decode_emulate *d = (struct decode_emulate *)h; + int action = d->handler.action; + + err = run_checkers(checkers, action, origin_insn, asi, h); + if (err == INSN_REJECTED) + return INSN_REJECTED; if (!emulate) - return actions[d->handler.action].decoder(insn, - asi, h); + return actions[action].decoder(insn, asi, h); - asi->insn_handler = actions[d->handler.action].handler; + asi->insn_handler = actions[action].handler; set_emulated_insn(insn, asi, thumb); return INSN_GOOD; } diff --git a/arch/arm/kernel/probes.h b/arch/arm/probes/decode.h index dba9f2466a93..f9b08ba7fe73 100644 --- a/arch/arm/kernel/probes.h +++ b/arch/arm/probes/decode.h @@ -1,5 +1,5 @@ /* - * arch/arm/kernel/probes.h + * arch/arm/probes/decode.h * * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. * @@ -314,6 +314,14 @@ union decode_action { probes_custom_decode_t *decoder; }; +typedef enum probes_insn (probes_check_t)(probes_opcode_t, + struct arch_probes_insn *, + const struct decode_header *); + +struct decode_checker { + probes_check_t *checker; +}; + #define DECODE_END \ {.bits = DECODE_TYPE_END} @@ -402,6 +410,7 @@ probes_insn_handler_t probes_emulate_none; int __kprobes probes_decode_insn(probes_opcode_t insn, struct arch_probes_insn *asi, const union decode_item *table, bool thumb, bool emulate, - const union decode_action *actions); + const union decode_action *actions, + const struct decode_checker **checkers); #endif diff --git a/arch/arm/probes/kprobes/Makefile b/arch/arm/probes/kprobes/Makefile new file mode 100644 index 000000000000..76a36bf102b7 --- /dev/null +++ b/arch/arm/probes/kprobes/Makefile @@ -0,0 +1,12 @@ +obj-$(CONFIG_KPROBES) += core.o actions-common.o checkers-common.o +obj-$(CONFIG_ARM_KPROBES_TEST) += test-kprobes.o +test-kprobes-objs := test-core.o + +ifdef CONFIG_THUMB2_KERNEL +obj-$(CONFIG_KPROBES) += actions-thumb.o checkers-thumb.o +test-kprobes-objs += test-thumb.o +else +obj-$(CONFIG_KPROBES) += actions-arm.o checkers-arm.o +obj-$(CONFIG_OPTPROBES) += opt-arm.o +test-kprobes-objs += test-arm.o +endif diff --git a/arch/arm/kernel/kprobes-arm.c b/arch/arm/probes/kprobes/actions-arm.c index ac300c60d656..b9056d649607 100644 --- a/arch/arm/kernel/kprobes-arm.c +++ b/arch/arm/probes/kprobes/actions-arm.c @@ -1,5 +1,5 @@ /* - * arch/arm/kernel/kprobes-decode.c + * arch/arm/probes/kprobes/actions-arm.c * * Copyright (C) 2006, 2007 Motorola Inc. * @@ -62,8 +62,9 @@ #include <linux/kprobes.h> #include <linux/ptrace.h> -#include "kprobes.h" -#include "probes-arm.h" +#include "../decode-arm.h" +#include "core.h" +#include "checkers.h" #if __LINUX_ARM_ARCH__ >= 6 #define BLX(reg) "blx "reg" \n\t" @@ -302,8 +303,6 @@ emulate_rdlo12rdhi16rn0rm8_rwflags_nopc(probes_opcode_t insn, } const union decode_action kprobes_arm_actions[NUM_PROBES_ARM_ACTIONS] = { - [PROBES_EMULATE_NONE] = {.handler = probes_emulate_none}, - [PROBES_SIMULATE_NOP] = {.handler = probes_simulate_nop}, [PROBES_PRELOAD_IMM] = {.handler = probes_simulate_nop}, [PROBES_PRELOAD_REG] = {.handler = probes_simulate_nop}, [PROBES_BRANCH_IMM] = {.handler = simulate_blx1}, @@ -341,3 +340,5 @@ const union decode_action kprobes_arm_actions[NUM_PROBES_ARM_ACTIONS] = { [PROBES_BRANCH] = {.handler = simulate_bbl}, [PROBES_LDMSTM] = {.decoder = kprobe_decode_ldmstm} }; + +const struct decode_checker *kprobes_arm_checkers[] = {arm_stack_checker, arm_regs_checker, NULL}; diff --git a/arch/arm/kernel/kprobes-common.c b/arch/arm/probes/kprobes/actions-common.c index 0bf5d64eba1d..bd20a71cd34a 100644 --- a/arch/arm/kernel/kprobes-common.c +++ b/arch/arm/probes/kprobes/actions-common.c @@ -1,5 +1,5 @@ /* - * arch/arm/kernel/kprobes-common.c + * arch/arm/probes/kprobes/actions-common.c * * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. * @@ -15,7 +15,7 @@ #include <linux/kprobes.h> #include <asm/opcodes.h> -#include "kprobes.h" +#include "core.h" static void __kprobes simulate_ldm1stm1(probes_opcode_t insn, diff --git a/arch/arm/kernel/kprobes-thumb.c b/arch/arm/probes/kprobes/actions-thumb.c index 9495d7f3516f..07cfd9bef340 100644 --- a/arch/arm/kernel/kprobes-thumb.c +++ b/arch/arm/probes/kprobes/actions-thumb.c @@ -1,5 +1,5 @@ /* - * arch/arm/kernel/kprobes-thumb.c + * arch/arm/probes/kprobes/actions-thumb.c * * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. * @@ -13,8 +13,9 @@ #include <linux/ptrace.h> #include <linux/kprobes.h> -#include "kprobes.h" -#include "probes-thumb.h" +#include "../decode-thumb.h" +#include "core.h" +#include "checkers.h" /* These emulation encodings are functionally equivalent... */ #define t32_emulate_rd8rn16rm0ra12_noflags \ @@ -664,3 +665,6 @@ const union decode_action kprobes_t32_actions[NUM_PROBES_T32_ACTIONS] = { [PROBES_T32_MUL_ADD_LONG] = { .handler = t32_emulate_rdlo12rdhi8rn16rm0_noflags}, }; + +const struct decode_checker *kprobes_t32_checkers[] = {t32_stack_checker, NULL}; +const struct decode_checker *kprobes_t16_checkers[] = {t16_stack_checker, NULL}; diff --git a/arch/arm/probes/kprobes/checkers-arm.c b/arch/arm/probes/kprobes/checkers-arm.c new file mode 100644 index 000000000000..7b9817333b68 --- /dev/null +++ b/arch/arm/probes/kprobes/checkers-arm.c @@ -0,0 +1,192 @@ +/* + * arch/arm/probes/kprobes/checkers-arm.c + * + * Copyright (C) 2014 Huawei Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/kernel.h> +#include "../decode.h" +#include "../decode-arm.h" +#include "checkers.h" + +static enum probes_insn __kprobes arm_check_stack(probes_opcode_t insn, + struct arch_probes_insn *asi, + const struct decode_header *h) +{ + /* + * PROBES_LDRSTRD, PROBES_LDMSTM, PROBES_STORE, + * PROBES_STORE_EXTRA may get here. Simply mark all normal + * insns as STACK_USE_NONE. + */ + static const union decode_item table[] = { + /* + * 'STR{,D,B,H}, Rt, [Rn, Rm]' should be marked as UNKNOWN + * if Rn or Rm is SP. + * x + * STR (register) cccc 011x x0x0 xxxx xxxx xxxx xxxx xxxx + * STRB (register) cccc 011x x1x0 xxxx xxxx xxxx xxxx xxxx + */ + DECODE_OR (0x0e10000f, 0x0600000d), + DECODE_OR (0x0e1f0000, 0x060d0000), + + /* + * x + * STRD (register) cccc 000x x0x0 xxxx xxxx xxxx 1111 xxxx + * STRH (register) cccc 000x x0x0 xxxx xxxx xxxx 1011 xxxx + */ + DECODE_OR (0x0e5000bf, 0x000000bd), + DECODE_CUSTOM (0x0e5f00b0, 0x000d00b0, STACK_USE_UNKNOWN), + + /* + * For PROBES_LDMSTM, only stmdx sp, [...] need to examine + * + * Bit B/A (bit 24) encodes arithmetic operation order. 1 means + * before, 0 means after. + * Bit I/D (bit 23) encodes arithmetic operation. 1 means + * increment, 0 means decrement. + * + * So: + * B I + * / / + * A D | Rn | + * STMDX SP, [...] cccc 100x 00x0 xxxx xxxx xxxx xxxx xxxx + */ + DECODE_CUSTOM (0x0edf0000, 0x080d0000, STACK_USE_STMDX), + + /* P U W | Rn | Rt | imm12 |*/ + /* STR (immediate) cccc 010x x0x0 1101 xxxx xxxx xxxx xxxx */ + /* STRB (immediate) cccc 010x x1x0 1101 xxxx xxxx xxxx xxxx */ + /* P U W | Rn | Rt |imm4| |imm4|*/ + /* STRD (immediate) cccc 000x x1x0 1101 xxxx xxxx 1111 xxxx */ + /* STRH (immediate) cccc 000x x1x0 1101 xxxx xxxx 1011 xxxx */ + /* + * index = (P == '1'); add = (U == '1'). + * Above insns with: + * index == 0 (str{,d,h} rx, [sp], #+/-imm) or + * add == 1 (str{,d,h} rx, [sp, #+<imm>]) + * should be STACK_USE_NONE. + * Only str{,b,d,h} rx,[sp,#-n] (P == 1 and U == 0) are + * required to be examined. + */ + /* STR{,B} Rt,[SP,#-n] cccc 0101 0xx0 1101 xxxx xxxx xxxx xxxx */ + DECODE_CUSTOM (0x0f9f0000, 0x050d0000, STACK_USE_FIXED_XXX), + + /* STR{D,H} Rt,[SP,#-n] cccc 0001 01x0 1101 xxxx xxxx 1x11 xxxx */ + DECODE_CUSTOM (0x0fdf00b0, 0x014d00b0, STACK_USE_FIXED_X0X), + + /* fall through */ + DECODE_CUSTOM (0, 0, STACK_USE_NONE), + DECODE_END + }; + + return probes_decode_insn(insn, asi, table, false, false, stack_check_actions, NULL); +} + +const struct decode_checker arm_stack_checker[NUM_PROBES_ARM_ACTIONS] = { + [PROBES_LDRSTRD] = {.checker = arm_check_stack}, + [PROBES_STORE_EXTRA] = {.checker = arm_check_stack}, + [PROBES_STORE] = {.checker = arm_check_stack}, + [PROBES_LDMSTM] = {.checker = arm_check_stack}, +}; + +static enum probes_insn __kprobes arm_check_regs_nouse(probes_opcode_t insn, + struct arch_probes_insn *asi, + const struct decode_header *h) +{ + asi->register_usage_flags = 0; + return INSN_GOOD; +} + +static enum probes_insn arm_check_regs_normal(probes_opcode_t insn, + struct arch_probes_insn *asi, + const struct decode_header *h) +{ + u32 regs = h->type_regs.bits >> DECODE_TYPE_BITS; + int i; + + asi->register_usage_flags = 0; + for (i = 0; i < 5; regs >>= 4, insn >>= 4, i++) + if (regs & 0xf) + asi->register_usage_flags |= 1 << (insn & 0xf); + + return INSN_GOOD; +} + + +static enum probes_insn arm_check_regs_ldmstm(probes_opcode_t insn, + struct arch_probes_insn *asi, + const struct decode_header *h) +{ + unsigned int reglist = insn & 0xffff; + unsigned int rn = (insn >> 16) & 0xf; + asi->register_usage_flags = reglist | (1 << rn); + return INSN_GOOD; +} + +static enum probes_insn arm_check_regs_mov_ip_sp(probes_opcode_t insn, + struct arch_probes_insn *asi, + const struct decode_header *h) +{ + /* Instruction is 'mov ip, sp' i.e. 'mov r12, r13' */ + asi->register_usage_flags = (1 << 12) | (1<< 13); + return INSN_GOOD; +} + +/* + * | Rn |Rt/d| | Rm | + * LDRD (register) cccc 000x x0x0 xxxx xxxx xxxx 1101 xxxx + * STRD (register) cccc 000x x0x0 xxxx xxxx xxxx 1111 xxxx + * | Rn |Rt/d| |imm4L| + * LDRD (immediate) cccc 000x x1x0 xxxx xxxx xxxx 1101 xxxx + * STRD (immediate) cccc 000x x1x0 xxxx xxxx xxxx 1111 xxxx + * + * Such instructions access Rt/d and its next register, so different + * from others, a specific checker is required to handle this extra + * implicit register usage. + */ +static enum probes_insn arm_check_regs_ldrdstrd(probes_opcode_t insn, + struct arch_probes_insn *asi, + const struct decode_header *h) +{ + int rdt = (insn >> 12) & 0xf; + arm_check_regs_normal(insn, asi, h); + asi->register_usage_flags |= 1 << (rdt + 1); + return INSN_GOOD; +} + + +const struct decode_checker arm_regs_checker[NUM_PROBES_ARM_ACTIONS] = { + [PROBES_MRS] = {.checker = arm_check_regs_normal}, + [PROBES_SATURATING_ARITHMETIC] = {.checker = arm_check_regs_normal}, + [PROBES_MUL1] = {.checker = arm_check_regs_normal}, + [PROBES_MUL2] = {.checker = arm_check_regs_normal}, + [PROBES_MUL_ADD_LONG] = {.checker = arm_check_regs_normal}, + [PROBES_MUL_ADD] = {.checker = arm_check_regs_normal}, + [PROBES_LOAD] = {.checker = arm_check_regs_normal}, + [PROBES_LOAD_EXTRA] = {.checker = arm_check_regs_normal}, + [PROBES_STORE] = {.checker = arm_check_regs_normal}, + [PROBES_STORE_EXTRA] = {.checker = arm_check_regs_normal}, + [PROBES_DATA_PROCESSING_REG] = {.checker = arm_check_regs_normal}, + [PROBES_DATA_PROCESSING_IMM] = {.checker = arm_check_regs_normal}, + [PROBES_SEV] = {.checker = arm_check_regs_nouse}, + [PROBES_WFE] = {.checker = arm_check_regs_nouse}, + [PROBES_SATURATE] = {.checker = arm_check_regs_normal}, + [PROBES_REV] = {.checker = arm_check_regs_normal}, + [PROBES_MMI] = {.checker = arm_check_regs_normal}, + [PROBES_PACK] = {.checker = arm_check_regs_normal}, + [PROBES_EXTEND] = {.checker = arm_check_regs_normal}, + [PROBES_EXTEND_ADD] = {.checker = arm_check_regs_normal}, + [PROBES_BITFIELD] = {.checker = arm_check_regs_normal}, + [PROBES_LDMSTM] = {.checker = arm_check_regs_ldmstm}, + [PROBES_MOV_IP_SP] = {.checker = arm_check_regs_mov_ip_sp}, + [PROBES_LDRSTRD] = {.checker = arm_check_regs_ldrdstrd}, +}; diff --git a/arch/arm/probes/kprobes/checkers-common.c b/arch/arm/probes/kprobes/checkers-common.c new file mode 100644 index 000000000000..971119c29474 --- /dev/null +++ b/arch/arm/probes/kprobes/checkers-common.c @@ -0,0 +1,101 @@ +/* + * arch/arm/probes/kprobes/checkers-common.c + * + * Copyright (C) 2014 Huawei Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/kernel.h> +#include "../decode.h" +#include "../decode-arm.h" +#include "checkers.h" + +enum probes_insn checker_stack_use_none(probes_opcode_t insn, + struct arch_probes_insn *asi, + const struct decode_header *h) +{ + asi->stack_space = 0; + return INSN_GOOD_NO_SLOT; +} + +enum probes_insn checker_stack_use_unknown(probes_opcode_t insn, + struct arch_probes_insn *asi, + const struct decode_header *h) +{ + asi->stack_space = -1; + return INSN_GOOD_NO_SLOT; +} + +#ifdef CONFIG_THUMB2_KERNEL +enum probes_insn checker_stack_use_imm_0xx(probes_opcode_t insn, + struct arch_probes_insn *asi, + const struct decode_header *h) +{ + int imm = insn & 0xff; + asi->stack_space = imm; + return INSN_GOOD_NO_SLOT; +} + +/* + * Different from other insn uses imm8, the real addressing offset of + * STRD in T32 encoding should be imm8 * 4. See ARMARM description. + */ +enum probes_insn checker_stack_use_t32strd(probes_opcode_t insn, + struct arch_probes_insn *asi, + const struct decode_header *h) +{ + int imm = insn & 0xff; + asi->stack_space = imm << 2; + return INSN_GOOD_NO_SLOT; +} +#else +enum probes_insn checker_stack_use_imm_x0x(probes_opcode_t insn, + struct arch_probes_insn *asi, + const struct decode_header *h) +{ + int imm = ((insn & 0xf00) >> 4) + (insn & 0xf); + asi->stack_space = imm; + return INSN_GOOD_NO_SLOT; +} +#endif + +enum probes_insn checker_stack_use_imm_xxx(probes_opcode_t insn, + struct arch_probes_insn *asi, + const struct decode_header *h) +{ + int imm = insn & 0xfff; + asi->stack_space = imm; + return INSN_GOOD_NO_SLOT; +} + +enum probes_insn checker_stack_use_stmdx(probes_opcode_t insn, + struct arch_probes_insn *asi, + const struct decode_header *h) +{ + unsigned int reglist = insn & 0xffff; + int pbit = insn & (1 << 24); + asi->stack_space = (hweight32(reglist) - (!pbit ? 1 : 0)) * 4; + + return INSN_GOOD_NO_SLOT; +} + +const union decode_action stack_check_actions[] = { + [STACK_USE_NONE] = {.decoder = checker_stack_use_none}, + [STACK_USE_UNKNOWN] = {.decoder = checker_stack_use_unknown}, +#ifdef CONFIG_THUMB2_KERNEL + [STACK_USE_FIXED_0XX] = {.decoder = checker_stack_use_imm_0xx}, + [STACK_USE_T32STRD] = {.decoder = checker_stack_use_t32strd}, +#else + [STACK_USE_FIXED_X0X] = {.decoder = checker_stack_use_imm_x0x}, +#endif + [STACK_USE_FIXED_XXX] = {.decoder = checker_stack_use_imm_xxx}, + [STACK_USE_STMDX] = {.decoder = checker_stack_use_stmdx}, +}; diff --git a/arch/arm/probes/kprobes/checkers-thumb.c b/arch/arm/probes/kprobes/checkers-thumb.c new file mode 100644 index 000000000000..d608e3b9017a --- /dev/null +++ b/arch/arm/probes/kprobes/checkers-thumb.c @@ -0,0 +1,110 @@ +/* + * arch/arm/probes/kprobes/checkers-thumb.c + * + * Copyright (C) 2014 Huawei Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/kernel.h> +#include "../decode.h" +#include "../decode-thumb.h" +#include "checkers.h" + +static enum probes_insn __kprobes t32_check_stack(probes_opcode_t insn, + struct arch_probes_insn *asi, + const struct decode_header *h) +{ + /* + * PROBES_T32_LDMSTM, PROBES_T32_LDRDSTRD and PROBES_T32_LDRSTR + * may get here. Simply mark all normal insns as STACK_USE_NONE. + */ + static const union decode_item table[] = { + + /* + * First, filter out all ldr insns to make our life easier. + * Following load insns may come here: + * LDM, LDRD, LDR. + * In T32 encoding, bit 20 is enough for distinguishing + * load and store. All load insns have this bit set, when + * all store insns have this bit clear. + */ + DECODE_CUSTOM (0x00100000, 0x00100000, STACK_USE_NONE), + + /* + * Mark all 'STR{,B,H}, Rt, [Rn, Rm]' as STACK_USE_UNKNOWN + * if Rn or Rm is SP. T32 doesn't encode STRD. + */ + /* xx | Rn | Rt | | Rm |*/ + /* STR (register) 1111 1000 0100 xxxx xxxx 0000 00xx xxxx */ + /* STRB (register) 1111 1000 0000 xxxx xxxx 0000 00xx xxxx */ + /* STRH (register) 1111 1000 0010 xxxx xxxx 0000 00xx xxxx */ + /* INVALID INSN 1111 1000 0110 xxxx xxxx 0000 00xx xxxx */ + /* By Introducing INVALID INSN, bit 21 and 22 can be ignored. */ + DECODE_OR (0xff9f0fc0, 0xf80d0000), + DECODE_CUSTOM (0xff900fcf, 0xf800000d, STACK_USE_UNKNOWN), + + + /* xx | Rn | Rt | PUW| imm8 |*/ + /* STR (imm 8) 1111 1000 0100 1101 xxxx 110x xxxx xxxx */ + /* STRB (imm 8) 1111 1000 0000 1101 xxxx 110x xxxx xxxx */ + /* STRH (imm 8) 1111 1000 0010 1101 xxxx 110x xxxx xxxx */ + /* INVALID INSN 1111 1000 0110 1101 xxxx 110x xxxx xxxx */ + /* Only consider U == 0 and P == 1: strx rx, [sp, #-<imm>] */ + DECODE_CUSTOM (0xff9f0e00, 0xf80d0c00, STACK_USE_FIXED_0XX), + + /* For STR{,B,H} (imm 12), offset is always positive, so ignore them. */ + + /* P U W | Rn | Rt | Rt2| imm8 |*/ + /* STRD (immediate) 1110 1001 01x0 1101 xxxx xxxx xxxx xxxx */ + /* + * Only consider U == 0 and P == 1. + * Also note that STRD in T32 encoding is special: + * imm = ZeroExtend(imm8:'00', 32) + */ + DECODE_CUSTOM (0xffdf0000, 0xe94d0000, STACK_USE_T32STRD), + + /* | Rn | */ + /* STMDB 1110 1001 00x0 1101 xxxx xxxx xxxx xxxx */ + DECODE_CUSTOM (0xffdf0000, 0xe90d0000, STACK_USE_STMDX), + + /* fall through */ + DECODE_CUSTOM (0, 0, STACK_USE_NONE), + DECODE_END + }; + + return probes_decode_insn(insn, asi, table, false, false, stack_check_actions, NULL); +} + +const struct decode_checker t32_stack_checker[NUM_PROBES_T32_ACTIONS] = { + [PROBES_T32_LDMSTM] = {.checker = t32_check_stack}, + [PROBES_T32_LDRDSTRD] = {.checker = t32_check_stack}, + [PROBES_T32_LDRSTR] = {.checker = t32_check_stack}, +}; + +/* + * See following comments. This insn must be 'push'. + */ +static enum probes_insn __kprobes t16_check_stack(probes_opcode_t insn, + struct arch_probes_insn *asi, + const struct decode_header *h) +{ + unsigned int reglist = insn & 0x1ff; + asi->stack_space = hweight32(reglist) * 4; + return INSN_GOOD; +} + +/* + * T16 encoding is simple: only the 'push' insn can need extra stack space. + * Other insns, like str, can only use r0-r7 as Rn. + */ +const struct decode_checker t16_stack_checker[NUM_PROBES_T16_ACTIONS] = { + [PROBES_T16_PUSH] = {.checker = t16_check_stack}, +}; diff --git a/arch/arm/probes/kprobes/checkers.h b/arch/arm/probes/kprobes/checkers.h new file mode 100644 index 000000000000..cf6c9e74d666 --- /dev/null +++ b/arch/arm/probes/kprobes/checkers.h @@ -0,0 +1,55 @@ +/* + * arch/arm/probes/kprobes/checkers.h + * + * Copyright (C) 2014 Huawei Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ +#ifndef _ARM_KERNEL_PROBES_CHECKERS_H +#define _ARM_KERNEL_PROBES_CHECKERS_H + +#include <linux/kernel.h> +#include <linux/types.h> +#include "../decode.h" + +extern probes_check_t checker_stack_use_none; +extern probes_check_t checker_stack_use_unknown; +#ifdef CONFIG_THUMB2_KERNEL +extern probes_check_t checker_stack_use_imm_0xx; +#else +extern probes_check_t checker_stack_use_imm_x0x; +#endif +extern probes_check_t checker_stack_use_imm_xxx; +extern probes_check_t checker_stack_use_stmdx; + +enum { + STACK_USE_NONE, + STACK_USE_UNKNOWN, +#ifdef CONFIG_THUMB2_KERNEL + STACK_USE_FIXED_0XX, + STACK_USE_T32STRD, +#else + STACK_USE_FIXED_X0X, +#endif + STACK_USE_FIXED_XXX, + STACK_USE_STMDX, + NUM_STACK_USE_TYPES +}; + +extern const union decode_action stack_check_actions[]; + +#ifndef CONFIG_THUMB2_KERNEL +extern const struct decode_checker arm_stack_checker[]; +extern const struct decode_checker arm_regs_checker[]; +#else +#endif +extern const struct decode_checker t32_stack_checker[]; +extern const struct decode_checker t16_stack_checker[]; +#endif diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/probes/kprobes/core.c index 6d644202c8dc..a4ec240ee7ba 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/probes/kprobes/core.c @@ -30,11 +30,11 @@ #include <asm/cacheflush.h> #include <linux/percpu.h> #include <linux/bug.h> +#include <asm/patch.h> -#include "kprobes.h" -#include "probes-arm.h" -#include "probes-thumb.h" -#include "patch.h" +#include "../decode-arm.h" +#include "../decode-thumb.h" +#include "core.h" #define MIN_STACK_SIZE(addr) \ min((unsigned long)MAX_STACK_SIZE, \ @@ -61,6 +61,7 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) kprobe_decode_insn_t *decode_insn; const union decode_action *actions; int is; + const struct decode_checker **checkers; if (in_exception_text(addr)) return -EINVAL; @@ -74,9 +75,11 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) insn = __opcode_thumb32_compose(insn, inst2); decode_insn = thumb32_probes_decode_insn; actions = kprobes_t32_actions; + checkers = kprobes_t32_checkers; } else { decode_insn = thumb16_probes_decode_insn; actions = kprobes_t16_actions; + checkers = kprobes_t16_checkers; } #else /* !CONFIG_THUMB2_KERNEL */ thumb = false; @@ -85,12 +88,13 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) insn = __mem_to_opcode_arm(*p->addr); decode_insn = arm_probes_decode_insn; actions = kprobes_arm_actions; + checkers = kprobes_arm_checkers; #endif p->opcode = insn; p->ainsn.insn = tmp_insn; - switch ((*decode_insn)(insn, &p->ainsn, true, actions)) { + switch ((*decode_insn)(insn, &p->ainsn, true, actions, checkers)) { case INSN_REJECTED: /* not supported */ return -EINVAL; @@ -111,6 +115,15 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) break; } + /* + * Never instrument insn like 'str r0, [sp, +/-r1]'. Also, insn likes + * 'str r0, [sp, #-68]' should also be prohibited. + * See __und_svc. + */ + if ((p->ainsn.stack_space < 0) || + (p->ainsn.stack_space > MAX_STACK_SIZE)) + return -EINVAL; + return 0; } @@ -150,19 +163,31 @@ void __kprobes arch_arm_kprobe(struct kprobe *p) * memory. It is also needed to atomically set the two half-words of a 32-bit * Thumb breakpoint. */ -int __kprobes __arch_disarm_kprobe(void *p) -{ - struct kprobe *kp = p; - void *addr = (void *)((uintptr_t)kp->addr & ~1); - - __patch_text(addr, kp->opcode); +struct patch { + void *addr; + unsigned int insn; +}; +static int __kprobes_remove_breakpoint(void *data) +{ + struct patch *p = data; + __patch_text(p->addr, p->insn); return 0; } +void __kprobes kprobes_remove_breakpoint(void *addr, unsigned int insn) +{ + struct patch p = { + .addr = addr, + .insn = insn, + }; + stop_machine(__kprobes_remove_breakpoint, &p, cpu_online_mask); +} + void __kprobes arch_disarm_kprobe(struct kprobe *p) { - stop_machine(__arch_disarm_kprobe, p, cpu_online_mask); + kprobes_remove_breakpoint((void *)((uintptr_t)p->addr & ~1), + p->opcode); } void __kprobes arch_remove_kprobe(struct kprobe *p) diff --git a/arch/arm/kernel/kprobes.h b/arch/arm/probes/kprobes/core.h index 9a2712ecefc3..ec5d1f20a085 100644 --- a/arch/arm/kernel/kprobes.h +++ b/arch/arm/probes/kprobes/core.h @@ -19,7 +19,8 @@ #ifndef _ARM_KERNEL_KPROBES_H #define _ARM_KERNEL_KPROBES_H -#include "probes.h" +#include <asm/kprobes.h> +#include "../decode.h" /* * These undefined instructions must be unique and @@ -29,6 +30,8 @@ #define KPROBE_THUMB16_BREAKPOINT_INSTRUCTION 0xde18 #define KPROBE_THUMB32_BREAKPOINT_INSTRUCTION 0xf7f0a018 +extern void kprobes_remove_breakpoint(void *addr, unsigned int insn); + enum probes_insn __kprobes kprobe_decode_ldmstm(kprobe_opcode_t insn, struct arch_probes_insn *asi, const struct decode_header *h); @@ -36,16 +39,19 @@ kprobe_decode_ldmstm(kprobe_opcode_t insn, struct arch_probes_insn *asi, typedef enum probes_insn (kprobe_decode_insn_t)(probes_opcode_t, struct arch_probes_insn *, bool, - const union decode_action *); + const union decode_action *, + const struct decode_checker *[]); #ifdef CONFIG_THUMB2_KERNEL extern const union decode_action kprobes_t32_actions[]; extern const union decode_action kprobes_t16_actions[]; - +extern const struct decode_checker *kprobes_t32_checkers[]; +extern const struct decode_checker *kprobes_t16_checkers[]; #else /* !CONFIG_THUMB2_KERNEL */ extern const union decode_action kprobes_arm_actions[]; +extern const struct decode_checker *kprobes_arm_checkers[]; #endif diff --git a/arch/arm/probes/kprobes/opt-arm.c b/arch/arm/probes/kprobes/opt-arm.c new file mode 100644 index 000000000000..bcdecc25461b --- /dev/null +++ b/arch/arm/probes/kprobes/opt-arm.c @@ -0,0 +1,370 @@ +/* + * Kernel Probes Jump Optimization (Optprobes) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2002, 2004 + * Copyright (C) Hitachi Ltd., 2012 + * Copyright (C) Huawei Inc., 2014 + */ + +#include <linux/kprobes.h> +#include <linux/jump_label.h> +#include <asm/kprobes.h> +#include <asm/cacheflush.h> +/* for arm_gen_branch */ +#include <asm/insn.h> +/* for patch_text */ +#include <asm/patch.h> + +#include "core.h" + +/* + * See register_usage_flags. If the probed instruction doesn't use PC, + * we can copy it into template and have it executed directly without + * simulation or emulation. + */ +#define ARM_REG_PC 15 +#define can_kprobe_direct_exec(m) (!test_bit(ARM_REG_PC, &(m))) + +/* + * NOTE: the first sub and add instruction will be modified according + * to the stack cost of the instruction. + */ +asm ( + ".global optprobe_template_entry\n" + "optprobe_template_entry:\n" + ".global optprobe_template_sub_sp\n" + "optprobe_template_sub_sp:" + " sub sp, sp, #0xff\n" + " stmia sp, {r0 - r14} \n" + ".global optprobe_template_add_sp\n" + "optprobe_template_add_sp:" + " add r3, sp, #0xff\n" + " str r3, [sp, #52]\n" + " mrs r4, cpsr\n" + " str r4, [sp, #64]\n" + " mov r1, sp\n" + " ldr r0, 1f\n" + " ldr r2, 2f\n" + /* + * AEABI requires an 8-bytes alignment stack. If + * SP % 8 != 0 (SP % 4 == 0 should be ensured), + * alloc more bytes here. + */ + " and r4, sp, #4\n" + " sub sp, sp, r4\n" +#if __LINUX_ARM_ARCH__ >= 5 + " blx r2\n" +#else + " mov lr, pc\n" + " mov pc, r2\n" +#endif + " add sp, sp, r4\n" + " ldr r1, [sp, #64]\n" + " tst r1, #"__stringify(PSR_T_BIT)"\n" + " ldrne r2, [sp, #60]\n" + " orrne r2, #1\n" + " strne r2, [sp, #60] @ set bit0 of PC for thumb\n" + " msr cpsr_cxsf, r1\n" + ".global optprobe_template_restore_begin\n" + "optprobe_template_restore_begin:\n" + " ldmia sp, {r0 - r15}\n" + ".global optprobe_template_restore_orig_insn\n" + "optprobe_template_restore_orig_insn:\n" + " nop\n" + ".global optprobe_template_restore_end\n" + "optprobe_template_restore_end:\n" + " nop\n" + ".global optprobe_template_val\n" + "optprobe_template_val:\n" + "1: .long 0\n" + ".global optprobe_template_call\n" + "optprobe_template_call:\n" + "2: .long 0\n" + ".global optprobe_template_end\n" + "optprobe_template_end:\n"); + +#define TMPL_VAL_IDX \ + ((unsigned long *)&optprobe_template_val - (unsigned long *)&optprobe_template_entry) +#define TMPL_CALL_IDX \ + ((unsigned long *)&optprobe_template_call - (unsigned long *)&optprobe_template_entry) +#define TMPL_END_IDX \ + ((unsigned long *)&optprobe_template_end - (unsigned long *)&optprobe_template_entry) +#define TMPL_ADD_SP \ + ((unsigned long *)&optprobe_template_add_sp - (unsigned long *)&optprobe_template_entry) +#define TMPL_SUB_SP \ + ((unsigned long *)&optprobe_template_sub_sp - (unsigned long *)&optprobe_template_entry) +#define TMPL_RESTORE_BEGIN \ + ((unsigned long *)&optprobe_template_restore_begin - (unsigned long *)&optprobe_template_entry) +#define TMPL_RESTORE_ORIGN_INSN \ + ((unsigned long *)&optprobe_template_restore_orig_insn - (unsigned long *)&optprobe_template_entry) +#define TMPL_RESTORE_END \ + ((unsigned long *)&optprobe_template_restore_end - (unsigned long *)&optprobe_template_entry) + +/* + * ARM can always optimize an instruction when using ARM ISA, except + * instructions like 'str r0, [sp, r1]' which store to stack and unable + * to determine stack space consumption statically. + */ +int arch_prepared_optinsn(struct arch_optimized_insn *optinsn) +{ + return optinsn->insn != NULL; +} + +/* + * In ARM ISA, kprobe opt always replace one instruction (4 bytes + * aligned and 4 bytes long). It is impossible to encounter another + * kprobe in the address range. So always return 0. + */ +int arch_check_optimized_kprobe(struct optimized_kprobe *op) +{ + return 0; +} + +/* Caller must ensure addr & 3 == 0 */ +static int can_optimize(struct kprobe *kp) +{ + if (kp->ainsn.stack_space < 0) + return 0; + /* + * 255 is the biggest imm can be used in 'sub r0, r0, #<imm>'. + * Number larger than 255 needs special encoding. + */ + if (kp->ainsn.stack_space > 255 - sizeof(struct pt_regs)) + return 0; + return 1; +} + +/* Free optimized instruction slot */ +static void +__arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty) +{ + if (op->optinsn.insn) { + free_optinsn_slot(op->optinsn.insn, dirty); + op->optinsn.insn = NULL; + } +} + +extern void kprobe_handler(struct pt_regs *regs); + +static void +optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs) +{ + unsigned long flags; + struct kprobe *p = &op->kp; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + /* Save skipped registers */ + regs->ARM_pc = (unsigned long)op->kp.addr; + regs->ARM_ORIG_r0 = ~0UL; + + local_irq_save(flags); + + if (kprobe_running()) { + kprobes_inc_nmissed_count(&op->kp); + } else { + __this_cpu_write(current_kprobe, &op->kp); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; + opt_pre_handler(&op->kp, regs); + __this_cpu_write(current_kprobe, NULL); + } + + /* + * We singlestep the replaced instruction only when it can't be + * executed directly during restore. + */ + if (!p->ainsn.kprobe_direct_exec) + op->kp.ainsn.insn_singlestep(p->opcode, &p->ainsn, regs); + + local_irq_restore(flags); +} + +int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *orig) +{ + kprobe_opcode_t *code; + unsigned long rel_chk; + unsigned long val; + unsigned long stack_protect = sizeof(struct pt_regs); + + if (!can_optimize(orig)) + return -EILSEQ; + + code = get_optinsn_slot(); + if (!code) + return -ENOMEM; + + /* + * Verify if the address gap is in 32MiB range, because this uses + * a relative jump. + * + * kprobe opt use a 'b' instruction to branch to optinsn.insn. + * According to ARM manual, branch instruction is: + * + * 31 28 27 24 23 0 + * +------+---+---+---+---+----------------+ + * | cond | 1 | 0 | 1 | 0 | imm24 | + * +------+---+---+---+---+----------------+ + * + * imm24 is a signed 24 bits integer. The real branch offset is computed + * by: imm32 = SignExtend(imm24:'00', 32); + * + * So the maximum forward branch should be: + * (0x007fffff << 2) = 0x01fffffc = 0x1fffffc + * The maximum backword branch should be: + * (0xff800000 << 2) = 0xfe000000 = -0x2000000 + * + * We can simply check (rel & 0xfe000003): + * if rel is positive, (rel & 0xfe000000) shoule be 0 + * if rel is negitive, (rel & 0xfe000000) should be 0xfe000000 + * the last '3' is used for alignment checking. + */ + rel_chk = (unsigned long)((long)code - + (long)orig->addr + 8) & 0xfe000003; + + if ((rel_chk != 0) && (rel_chk != 0xfe000000)) { + /* + * Different from x86, we free code buf directly instead of + * calling __arch_remove_optimized_kprobe() because + * we have not fill any field in op. + */ + free_optinsn_slot(code, 0); + return -ERANGE; + } + + /* Copy arch-dep-instance from template. */ + memcpy(code, &optprobe_template_entry, + TMPL_END_IDX * sizeof(kprobe_opcode_t)); + + /* Adjust buffer according to instruction. */ + BUG_ON(orig->ainsn.stack_space < 0); + + stack_protect += orig->ainsn.stack_space; + + /* Should have been filtered by can_optimize(). */ + BUG_ON(stack_protect > 255); + + /* Create a 'sub sp, sp, #<stack_protect>' */ + code[TMPL_SUB_SP] = __opcode_to_mem_arm(0xe24dd000 | stack_protect); + /* Create a 'add r3, sp, #<stack_protect>' */ + code[TMPL_ADD_SP] = __opcode_to_mem_arm(0xe28d3000 | stack_protect); + + /* Set probe information */ + val = (unsigned long)op; + code[TMPL_VAL_IDX] = val; + + /* Set probe function call */ + val = (unsigned long)optimized_callback; + code[TMPL_CALL_IDX] = val; + + /* If possible, copy insn and have it executed during restore */ + orig->ainsn.kprobe_direct_exec = false; + if (can_kprobe_direct_exec(orig->ainsn.register_usage_flags)) { + kprobe_opcode_t final_branch = arm_gen_branch( + (unsigned long)(&code[TMPL_RESTORE_END]), + (unsigned long)(op->kp.addr) + 4); + if (final_branch != 0) { + /* + * Replace original 'ldmia sp, {r0 - r15}' with + * 'ldmia {r0 - r14}', restore all registers except pc. + */ + code[TMPL_RESTORE_BEGIN] = __opcode_to_mem_arm(0xe89d7fff); + + /* The original probed instruction */ + code[TMPL_RESTORE_ORIGN_INSN] = __opcode_to_mem_arm(orig->opcode); + + /* Jump back to next instruction */ + code[TMPL_RESTORE_END] = __opcode_to_mem_arm(final_branch); + orig->ainsn.kprobe_direct_exec = true; + } + } + + flush_icache_range((unsigned long)code, + (unsigned long)(&code[TMPL_END_IDX])); + + /* Set op->optinsn.insn means prepared. */ + op->optinsn.insn = code; + return 0; +} + +void __kprobes arch_optimize_kprobes(struct list_head *oplist) +{ + struct optimized_kprobe *op, *tmp; + + list_for_each_entry_safe(op, tmp, oplist, list) { + unsigned long insn; + WARN_ON(kprobe_disabled(&op->kp)); + + /* + * Backup instructions which will be replaced + * by jump address + */ + memcpy(op->optinsn.copied_insn, op->kp.addr, + RELATIVEJUMP_SIZE); + + insn = arm_gen_branch((unsigned long)op->kp.addr, + (unsigned long)op->optinsn.insn); + BUG_ON(insn == 0); + + /* + * Make it a conditional branch if replaced insn + * is consitional + */ + insn = (__mem_to_opcode_arm( + op->optinsn.copied_insn[0]) & 0xf0000000) | + (insn & 0x0fffffff); + + /* + * Similar to __arch_disarm_kprobe, operations which + * removing breakpoints must be wrapped by stop_machine + * to avoid racing. + */ + kprobes_remove_breakpoint(op->kp.addr, insn); + + list_del_init(&op->list); + } +} + +void arch_unoptimize_kprobe(struct optimized_kprobe *op) +{ + arch_arm_kprobe(&op->kp); +} + +/* + * Recover original instructions and breakpoints from relative jumps. + * Caller must call with locking kprobe_mutex. + */ +void arch_unoptimize_kprobes(struct list_head *oplist, + struct list_head *done_list) +{ + struct optimized_kprobe *op, *tmp; + + list_for_each_entry_safe(op, tmp, oplist, list) { + arch_unoptimize_kprobe(op); + list_move(&op->list, done_list); + } +} + +int arch_within_optimized_kprobe(struct optimized_kprobe *op, + unsigned long addr) +{ + return ((unsigned long)op->kp.addr <= addr && + (unsigned long)op->kp.addr + RELATIVEJUMP_SIZE > addr); +} + +void arch_remove_optimized_kprobe(struct optimized_kprobe *op) +{ + __arch_remove_optimized_kprobe(op, 1); +} diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/probes/kprobes/test-arm.c index cb1424240ff6..8866aedfdea2 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/probes/kprobes/test-arm.c @@ -12,8 +12,9 @@ #include <linux/module.h> #include <asm/system_info.h> #include <asm/opcodes.h> +#include <asm/probes.h> -#include "kprobes-test.h" +#include "test-core.h" #define TEST_ISA "32" @@ -203,9 +204,9 @@ void kprobe_arm_test_cases(void) #endif TEST_GROUP("Miscellaneous instructions") - TEST("mrs r0, cpsr") - TEST("mrspl r7, cpsr") - TEST("mrs r14, cpsr") + TEST_RMASKED("mrs r",0,~PSR_IGNORE_BITS,", cpsr") + TEST_RMASKED("mrspl r",7,~PSR_IGNORE_BITS,", cpsr") + TEST_RMASKED("mrs r",14,~PSR_IGNORE_BITS,", cpsr") TEST_UNSUPPORTED(__inst_arm(0xe10ff000) " @ mrs r15, cpsr") TEST_UNSUPPORTED("mrs r0, spsr") TEST_UNSUPPORTED("mrs lr, spsr") @@ -214,9 +215,12 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED("msr cpsr_f, lr") TEST_UNSUPPORTED("msr spsr, r0") +#if __LINUX_ARM_ARCH__ >= 5 || \ + (__LINUX_ARM_ARCH__ == 4 && !defined(CONFIG_CPU_32v4)) TEST_BF_R("bx r",0,2f,"") TEST_BB_R("bx r",7,2f,"") TEST_BF_R("bxeq r",14,2f,"") +#endif #if __LINUX_ARM_ARCH__ >= 5 TEST_R("clz r0, r",0, 0x0,"") @@ -476,7 +480,9 @@ void kprobe_arm_test_cases(void) TEST_GROUP("Extra load/store instructions") TEST_RPR( "strh r",0, VAL1,", [r",1, 48,", -r",2, 24,"]") - TEST_RPR( "streqh r",14,VAL2,", [r",13,0, ", r",12, 48,"]") + TEST_RPR( "streqh r",14,VAL2,", [r",11,0, ", r",12, 48,"]") + TEST_UNSUPPORTED( "streqh r14, [r13, r12]") + TEST_UNSUPPORTED( "streqh r14, [r12, r13]") TEST_RPR( "strh r",1, VAL1,", [r",2, 24,", r",3, 48,"]!") TEST_RPR( "strneh r",12,VAL2,", [r",11,48,", -r",10,24,"]!") TEST_RPR( "strh r",2, VAL1,", [r",3, 24,"], r",4, 48,"") @@ -501,6 +507,9 @@ void kprobe_arm_test_cases(void) TEST_RP( "strplh r",12,VAL2,", [r",11,24,", #-4]!") TEST_RP( "strh r",2, VAL1,", [r",3, 24,"], #48") TEST_RP( "strh r",10,VAL2,", [r",9, 64,"], #-48") + TEST_RP( "strh r",3, VAL1,", [r",13,TEST_MEMORY_SIZE,", #-"__stringify(MAX_STACK_SIZE)"]!") + TEST_UNSUPPORTED("strh r3, [r13, #-"__stringify(MAX_STACK_SIZE)"-8]!") + TEST_RP( "strh r",4, VAL1,", [r",14,TEST_MEMORY_SIZE,", #-"__stringify(MAX_STACK_SIZE)"-8]!") TEST_UNSUPPORTED(__inst_arm(0xe1efc3b0) " @ strh r12, [pc, #48]!") TEST_UNSUPPORTED(__inst_arm(0xe0c9f3b0) " @ strh pc, [r9], #48") @@ -565,7 +574,9 @@ void kprobe_arm_test_cases(void) #if __LINUX_ARM_ARCH__ >= 5 TEST_RPR( "strd r",0, VAL1,", [r",1, 48,", -r",2,24,"]") - TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]") + TEST_RPR( "strccd r",8, VAL2,", [r",11,0, ", r",12,48,"]") + TEST_UNSUPPORTED( "strccd r8, [r13, r12]") + TEST_UNSUPPORTED( "strccd r8, [r12, r13]") TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!") TEST_RPR( "strcsd r",12,VAL2,", [r",11,48,", -r",10,24,"]!") TEST_RPR( "strd r",2, VAL1,", [r",5, 24,"], r",4,48,"") @@ -589,6 +600,9 @@ void kprobe_arm_test_cases(void) TEST_RP( "strvcd r",12,VAL2,", [r",11,24,", #-16]!") TEST_RP( "strd r",2, VAL1,", [r",4, 24,"], #48") TEST_RP( "strd r",10,VAL2,", [r",9, 64,"], #-48") + TEST_RP( "strd r",6, VAL1,", [r",13,TEST_MEMORY_SIZE,", #-"__stringify(MAX_STACK_SIZE)"]!") + TEST_UNSUPPORTED("strd r6, [r13, #-"__stringify(MAX_STACK_SIZE)"-8]!") + TEST_RP( "strd r",4, VAL1,", [r",12,TEST_MEMORY_SIZE,", #-"__stringify(MAX_STACK_SIZE)"-8]!") TEST_UNSUPPORTED(__inst_arm(0xe1efc3f0) " @ strd r12, [pc, #48]!") TEST_P( "ldrd r0, [r",0, 24,", #-8]") @@ -637,14 +651,20 @@ void kprobe_arm_test_cases(void) TEST_RP( "str"byte" r",12,VAL2,", [r",11,24,", #-4]!") \ TEST_RP( "str"byte" r",2, VAL1,", [r",3, 24,"], #48") \ TEST_RP( "str"byte" r",10,VAL2,", [r",9, 64,"], #-48") \ + TEST_RP( "str"byte" r",3, VAL1,", [r",13,TEST_MEMORY_SIZE,", #-"__stringify(MAX_STACK_SIZE)"]!") \ + TEST_UNSUPPORTED("str"byte" r3, [r13, #-"__stringify(MAX_STACK_SIZE)"-8]!") \ + TEST_RP( "str"byte" r",4, VAL1,", [r",10,TEST_MEMORY_SIZE,", #-"__stringify(MAX_STACK_SIZE)"-8]!") \ TEST_RPR("str"byte" r",0, VAL1,", [r",1, 48,", -r",2, 24,"]") \ - TEST_RPR("str"byte" r",14,VAL2,", [r",13,0, ", r",12, 48,"]") \ + TEST_RPR("str"byte" r",14,VAL2,", [r",11,0, ", r",12, 48,"]") \ + TEST_UNSUPPORTED("str"byte" r14, [r13, r12]") \ + TEST_UNSUPPORTED("str"byte" r14, [r12, r13]") \ TEST_RPR("str"byte" r",1, VAL1,", [r",2, 24,", r",3, 48,"]!") \ TEST_RPR("str"byte" r",12,VAL2,", [r",11,48,", -r",10,24,"]!") \ TEST_RPR("str"byte" r",2, VAL1,", [r",3, 24,"], r",4, 48,"") \ TEST_RPR("str"byte" r",10,VAL2,", [r",9, 48,"], -r",11,24,"") \ TEST_RPR("str"byte" r",0, VAL1,", [r",1, 24,", r",2, 32,", asl #1]")\ - TEST_RPR("str"byte" r",14,VAL2,", [r",13,0, ", r",12, 32,", lsr #2]")\ + TEST_RPR("str"byte" r",14,VAL2,", [r",11,0, ", r",12, 32,", lsr #2]")\ + TEST_UNSUPPORTED("str"byte" r14, [r13, r12, lsr #2]") \ TEST_RPR("str"byte" r",1, VAL1,", [r",2, 24,", r",3, 32,", asr #3]!")\ TEST_RPR("str"byte" r",12,VAL2,", [r",11,24,", r",10, 4,", ror #31]!")\ TEST_P( "ldr"byte" r0, [r",0, 24,", #-2]") \ @@ -668,12 +688,12 @@ void kprobe_arm_test_cases(void) LOAD_STORE("") TEST_P( "str pc, [r",0,0,", #15*4]") - TEST_R( "str pc, [sp, r",2,15*4,"]") + TEST_UNSUPPORTED( "str pc, [sp, r2]") TEST_BF( "ldr pc, [sp, #15*4]") TEST_BF_R("ldr pc, [sp, r",2,15*4,"]") TEST_P( "str sp, [r",0,0,", #13*4]") - TEST_R( "str sp, [sp, r",2,13*4,"]") + TEST_UNSUPPORTED( "str sp, [sp, r2]") TEST_BF( "ldr sp, [sp, #13*4]") TEST_BF_R("ldr sp, [sp, r",2,13*4,"]") diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/probes/kprobes/test-core.c index b206d7790c77..9775de22e2ff 100644 --- a/arch/arm/kernel/kprobes-test.c +++ b/arch/arm/probes/kprobes/test-core.c @@ -209,10 +209,10 @@ #include <linux/bug.h> #include <asm/opcodes.h> -#include "kprobes.h" -#include "probes-arm.h" -#include "probes-thumb.h" -#include "kprobes-test.h" +#include "core.h" +#include "test-core.h" +#include "../decode-arm.h" +#include "../decode-thumb.h" #define BENCHMARKING 1 @@ -236,6 +236,8 @@ static int tests_failed; #ifndef CONFIG_THUMB2_KERNEL +#define RET(reg) "mov pc, "#reg + long arm_func(long r0, long r1); static void __used __naked __arm_kprobes_test_func(void) @@ -245,7 +247,7 @@ static void __used __naked __arm_kprobes_test_func(void) ".type arm_func, %%function \n\t" "arm_func: \n\t" "adds r0, r0, r1 \n\t" - "bx lr \n\t" + "mov pc, lr \n\t" ".code "NORMAL_ISA /* Back to Thumb if necessary */ : : : "r0", "r1", "cc" ); @@ -253,6 +255,8 @@ static void __used __naked __arm_kprobes_test_func(void) #else /* CONFIG_THUMB2_KERNEL */ +#define RET(reg) "bx "#reg + long thumb16_func(long r0, long r1); long thumb32even_func(long r0, long r1); long thumb32odd_func(long r0, long r1); @@ -494,7 +498,7 @@ static void __naked benchmark_nop(void) { __asm__ __volatile__ ( "nop \n\t" - "bx lr" + RET(lr)" \n\t" ); } @@ -977,7 +981,7 @@ void __naked __kprobes_test_case_start(void) "bic r0, lr, #1 @ r0 = inline data \n\t" "mov r1, sp \n\t" "bl kprobes_test_case_start \n\t" - "bx r0 \n\t" + RET(r0)" \n\t" ); } @@ -1056,15 +1060,6 @@ static int test_case_run_count; static bool test_case_is_thumb; static int test_instance; -/* - * We ignore the state of the imprecise abort disable flag (CPSR.A) because this - * can change randomly as the kernel doesn't take care to preserve or initialise - * this across context switches. Also, with Security Extentions, the flag may - * not be under control of the kernel; for this reason we ignore the state of - * the FIQ disable flag CPSR.F as well. - */ -#define PSR_IGNORE_BITS (PSR_A_BIT | PSR_F_BIT) - static unsigned long test_check_cc(int cc, unsigned long cpsr) { int ret = arm_check_condition(cc << 28, cpsr); @@ -1196,6 +1191,13 @@ static void setup_test_context(struct pt_regs *regs) regs->uregs[arg->reg] = (unsigned long)current_stack + arg->val; memory_needs_checking = true; + /* + * Test memory at an address below SP is in danger of + * being altered by an interrupt occurring and pushing + * data onto the stack. Disable interrupts to stop this. + */ + if (arg->reg == 13) + regs->ARM_cpsr |= PSR_I_BIT; break; } case ARG_TYPE_MEM: { @@ -1264,14 +1266,26 @@ test_case_pre_handler(struct kprobe *p, struct pt_regs *regs) static int __kprobes test_after_pre_handler(struct kprobe *p, struct pt_regs *regs) { + struct test_arg *args; + if (container_of(p, struct test_probe, kprobe)->hit == test_instance) return 0; /* Already run for this test instance */ result_regs = *regs; + + /* Mask out results which are indeterminate */ result_regs.ARM_cpsr &= ~PSR_IGNORE_BITS; + for (args = current_args; args[0].type != ARG_TYPE_END; ++args) + if (args[0].type == ARG_TYPE_REG_MASKED) { + struct test_arg_regptr *arg = + (struct test_arg_regptr *)args; + result_regs.uregs[arg->reg] &= arg->val; + } /* Undo any changes done to SP by the test case */ regs->ARM_sp = (unsigned long)current_stack; + /* Enable interrupts in case setup_test_context disabled them */ + regs->ARM_cpsr &= ~PSR_I_BIT; container_of(p, struct test_probe, kprobe)->hit = test_instance; return 0; diff --git a/arch/arm/kernel/kprobes-test.h b/arch/arm/probes/kprobes/test-core.h index 4430990e90e7..94285203e9f7 100644 --- a/arch/arm/kernel/kprobes-test.h +++ b/arch/arm/probes/kprobes/test-core.h @@ -1,5 +1,5 @@ /* - * arch/arm/kernel/kprobes-test.h + * arch/arm/probes/kprobes/test-core.h * * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. * @@ -45,10 +45,11 @@ extern int kprobe_test_cc_position; * */ -#define ARG_TYPE_END 0 -#define ARG_TYPE_REG 1 -#define ARG_TYPE_PTR 2 -#define ARG_TYPE_MEM 3 +#define ARG_TYPE_END 0 +#define ARG_TYPE_REG 1 +#define ARG_TYPE_PTR 2 +#define ARG_TYPE_MEM 3 +#define ARG_TYPE_REG_MASKED 4 #define ARG_FLAG_UNSUPPORTED 0x01 #define ARG_FLAG_SUPPORTED 0x02 @@ -61,7 +62,7 @@ struct test_arg { }; struct test_arg_regptr { - u8 type; /* ARG_TYPE_REG or ARG_TYPE_PTR */ + u8 type; /* ARG_TYPE_REG or ARG_TYPE_PTR or ARG_TYPE_REG_MASKED */ u8 reg; u8 _padding[2]; u32 val; @@ -138,6 +139,12 @@ struct test_arg_end { ".short 0 \n\t" \ ".word "#val" \n\t" +#define TEST_ARG_REG_MASKED(reg, val) \ + ".byte "__stringify(ARG_TYPE_REG_MASKED)" \n\t" \ + ".byte "#reg" \n\t" \ + ".short 0 \n\t" \ + ".word "#val" \n\t" + #define TEST_ARG_END(flags) \ ".byte "__stringify(ARG_TYPE_END)" \n\t" \ ".byte "TEST_ISA flags" \n\t" \ @@ -395,6 +402,22 @@ struct test_arg_end { " "codex" \n\t" \ TESTCASE_END +#define TEST_RMASKED(code1, reg, mask, code2) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG_MASKED(reg, mask) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg code2) \ + TESTCASE_END + +/* + * We ignore the state of the imprecise abort disable flag (CPSR.A) because this + * can change randomly as the kernel doesn't take care to preserve or initialise + * this across context switches. Also, with Security Extensions, the flag may + * not be under control of the kernel; for this reason we ignore the state of + * the FIQ disable flag CPSR.F as well. + */ +#define PSR_IGNORE_BITS (PSR_A_BIT | PSR_F_BIT) + /* * Macros for defining space directives spread over multiple lines. diff --git a/arch/arm/kernel/kprobes-test-thumb.c b/arch/arm/probes/kprobes/test-thumb.c index 844dd10d8593..b683b4517458 100644 --- a/arch/arm/kernel/kprobes-test-thumb.c +++ b/arch/arm/probes/kprobes/test-thumb.c @@ -1,5 +1,5 @@ /* - * arch/arm/kernel/kprobes-test-thumb.c + * arch/arm/probes/kprobes/test-thumb.c * * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. * @@ -11,8 +11,9 @@ #include <linux/kernel.h> #include <linux/module.h> #include <asm/opcodes.h> +#include <asm/probes.h> -#include "kprobes-test.h" +#include "test-core.h" #define TEST_ISA "16" @@ -416,6 +417,9 @@ void kprobe_thumb32_test_cases(void) TEST_RR( "strd r",14,VAL2,", r",12,VAL1,", [sp, #16]!") TEST_RRP("strd r",1, VAL1,", r",0, VAL2,", [r",7, 24,"], #16") TEST_RR( "strd r",7, VAL2,", r",8, VAL1,", [sp], #-16") + TEST_RRP("strd r",6, VAL1,", r",7, VAL2,", [r",13, TEST_MEMORY_SIZE,", #-"__stringify(MAX_STACK_SIZE)"]!") + TEST_UNSUPPORTED("strd r6, r7, [r13, #-"__stringify(MAX_STACK_SIZE)"-8]!") + TEST_RRP("strd r",4, VAL1,", r",5, VAL2,", [r",14, TEST_MEMORY_SIZE,", #-"__stringify(MAX_STACK_SIZE)"-8]!") TEST_UNSUPPORTED(__inst_thumb32(0xe9efec04) " @ strd r14, r12, [pc, #16]!") TEST_UNSUPPORTED(__inst_thumb32(0xe8efec04) " @ strd r14, r12, [pc], #16") @@ -774,8 +778,8 @@ CONDITION_INSTRUCTIONS(22, TEST_UNSUPPORTED("subs pc, lr, #4") - TEST("mrs r0, cpsr") - TEST("mrs r14, cpsr") + TEST_RMASKED("mrs r",0,~PSR_IGNORE_BITS,", cpsr") + TEST_RMASKED("mrs r",14,~PSR_IGNORE_BITS,", cpsr") TEST_UNSUPPORTED(__inst_thumb32(0xf3ef8d00) " @ mrs sp, spsr") TEST_UNSUPPORTED(__inst_thumb32(0xf3ef8f00) " @ mrs pc, spsr") TEST_UNSUPPORTED("mrs r0, spsr") @@ -821,14 +825,22 @@ CONDITION_INSTRUCTIONS(22, TEST_RP( "str"size" r",14,VAL2,", [r",1, 256, ", #-128]!") \ TEST_RPR("str"size".w r",0, VAL1,", [r",1, 0,", r",2, 4,"]") \ TEST_RPR("str"size" r",14,VAL2,", [r",10,0,", r",11,4,", lsl #1]") \ + TEST_UNSUPPORTED("str"size" r0, [r13, r1]") \ TEST_R( "str"size".w r",7, VAL1,", [sp, #24]") \ TEST_RP( "str"size".w r",0, VAL2,", [r",0,0, "]") \ + TEST_RP( "str"size" r",6, VAL1,", [r",13, TEST_MEMORY_SIZE,", #-"__stringify(MAX_STACK_SIZE)"]!") \ + TEST_UNSUPPORTED("str"size" r6, [r13, #-"__stringify(MAX_STACK_SIZE)"-8]!") \ + TEST_RP( "str"size" r",4, VAL2,", [r",12, TEST_MEMORY_SIZE,", #-"__stringify(MAX_STACK_SIZE)"-8]!") \ TEST_UNSUPPORTED("str"size"t r0, [r1, #4]") SINGLE_STORE("b") SINGLE_STORE("h") SINGLE_STORE("") + TEST_UNSUPPORTED(__inst_thumb32(0xf801000d) " @ strb r0, [r1, r13]") + TEST_UNSUPPORTED(__inst_thumb32(0xf821000d) " @ strh r0, [r1, r13]") + TEST_UNSUPPORTED(__inst_thumb32(0xf841000d) " @ str r0, [r1, r13]") + TEST("str sp, [sp]") TEST_UNSUPPORTED(__inst_thumb32(0xf8cfe000) " @ str r14, [pc]") TEST_UNSUPPORTED(__inst_thumb32(0xf8cef000) " @ str pc, [r14]") diff --git a/arch/arm/probes/uprobes/Makefile b/arch/arm/probes/uprobes/Makefile new file mode 100644 index 000000000000..e1dc3d0f6d5a --- /dev/null +++ b/arch/arm/probes/uprobes/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_UPROBES) += core.o actions-arm.o diff --git a/arch/arm/kernel/uprobes-arm.c b/arch/arm/probes/uprobes/actions-arm.c index d3b655ff17da..76eb44972ebe 100644 --- a/arch/arm/kernel/uprobes-arm.c +++ b/arch/arm/probes/uprobes/actions-arm.c @@ -13,9 +13,9 @@ #include <linux/uprobes.h> #include <linux/module.h> -#include "probes.h" -#include "probes-arm.h" -#include "uprobes.h" +#include "../decode.h" +#include "../decode-arm.h" +#include "core.h" static int uprobes_substitute_pc(unsigned long *pinsn, u32 oregs) { @@ -195,8 +195,6 @@ uprobe_decode_ldmstm(probes_opcode_t insn, } const union decode_action uprobes_probes_actions[] = { - [PROBES_EMULATE_NONE] = {.handler = probes_simulate_nop}, - [PROBES_SIMULATE_NOP] = {.handler = probes_simulate_nop}, [PROBES_PRELOAD_IMM] = {.handler = probes_simulate_nop}, [PROBES_PRELOAD_REG] = {.handler = probes_simulate_nop}, [PROBES_BRANCH_IMM] = {.handler = simulate_blx1}, diff --git a/arch/arm/kernel/uprobes.c b/arch/arm/probes/uprobes/core.c index 56adf9c1fde0..d1329f1ba4e4 100644 --- a/arch/arm/kernel/uprobes.c +++ b/arch/arm/probes/uprobes/core.c @@ -17,9 +17,9 @@ #include <asm/opcodes.h> #include <asm/traps.h> -#include "probes.h" -#include "probes-arm.h" -#include "uprobes.h" +#include "../decode.h" +#include "../decode-arm.h" +#include "core.h" #define UPROBE_TRAP_NR UINT_MAX @@ -88,7 +88,7 @@ int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, auprobe->ixol[1] = __opcode_to_mem_arm(UPROBE_SS_ARM_INSN); ret = arm_probes_decode_insn(insn, &auprobe->asi, false, - uprobes_probes_actions); + uprobes_probes_actions, NULL); switch (ret) { case INSN_REJECTED: return -EINVAL; diff --git a/arch/arm/kernel/uprobes.h b/arch/arm/probes/uprobes/core.h index 1d0c12dfbd03..1d0c12dfbd03 100644 --- a/arch/arm/kernel/uprobes.h +++ b/arch/arm/probes/uprobes/core.h diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index c7ca936ebd99..263a2044c65b 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -29,10 +29,10 @@ struct start_info _xen_start_info; struct start_info *xen_start_info = &_xen_start_info; -EXPORT_SYMBOL_GPL(xen_start_info); +EXPORT_SYMBOL(xen_start_info); enum xen_domain_type xen_domain_type = XEN_NATIVE; -EXPORT_SYMBOL_GPL(xen_domain_type); +EXPORT_SYMBOL(xen_domain_type); struct shared_info xen_dummy_shared_info; struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info; diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index 351b24a979d4..793551d15f1d 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -149,7 +149,7 @@ void xen_destroy_contiguous_region(phys_addr_t pstart, unsigned int order) EXPORT_SYMBOL_GPL(xen_destroy_contiguous_region); struct dma_map_ops *xen_dma_ops; -EXPORT_SYMBOL_GPL(xen_dma_ops); +EXPORT_SYMBOL(xen_dma_ops); static struct dma_map_ops xen_swiotlb_dma_ops = { .mapping_error = xen_swiotlb_dma_mapping_error, diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c index 054857776254..cb7a14c5cd69 100644 --- a/arch/arm/xen/p2m.c +++ b/arch/arm/xen/p2m.c @@ -102,7 +102,7 @@ int set_foreign_p2m_mapping(struct gnttab_map_grant_ref *map_ops, EXPORT_SYMBOL_GPL(set_foreign_p2m_mapping); int clear_foreign_p2m_mapping(struct gnttab_unmap_grant_ref *unmap_ops, - struct gnttab_map_grant_ref *kmap_ops, + struct gnttab_unmap_grant_ref *kunmap_ops, struct page **pages, unsigned int count) { int i; |