diff options
Diffstat (limited to 'arch/arm')
42 files changed, 148 insertions, 122 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 1ba358ba16b8..7ea15176d109 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -168,7 +168,7 @@ machine-$(CONFIG_ARCH_OMAP1) += omap1 machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 machine-$(CONFIG_ARCH_ORION5X) += orion5x machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell -machine-$(CONFIG_ARCH_PRIMA2) += prima2 +machine-$(CONFIG_ARCH_SIRF) += prima2 machine-$(CONFIG_ARCH_PXA) += pxa machine-$(CONFIG_ARCH_REALVIEW) += realview machine-$(CONFIG_ARCH_RPC) += rpc diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 550eb772c30e..52a1f5efc086 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -80,7 +80,7 @@ sata@a0000 { compatible = "marvell,orion-sata"; - reg = <0xa0000 0x2400>; + reg = <0xa0000 0x5000>; interrupts = <55>; clocks = <&gateclk 15>, <&gateclk 30>; clock-names = "0", "1"; @@ -96,7 +96,7 @@ ethernet@70000 { compatible = "marvell,armada-370-neta"; - reg = <0x70000 0x2500>; + reg = <0x70000 0x4000>; interrupts = <8>; clocks = <&gateclk 4>; status = "disabled"; @@ -104,7 +104,7 @@ ethernet@74000 { compatible = "marvell,armada-370-neta"; - reg = <0x74000 0x2500>; + reg = <0x74000 0x4000>; interrupts = <10>; clocks = <&gateclk 3>; status = "disabled"; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index f4029f015aff..2d9335da210c 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -92,7 +92,7 @@ ethernet@34000 { compatible = "marvell,armada-370-neta"; - reg = <0x34000 0x2500>; + reg = <0x34000 0x4000>; interrupts = <14>; clocks = <&gateclk 1>; status = "disabled"; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 6ab56bd35de9..488ca5eb9a55 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -107,7 +107,7 @@ ethernet@34000 { compatible = "marvell,armada-370-neta"; - reg = <0x34000 0x2500>; + reg = <0x34000 0x4000>; interrupts = <14>; clocks = <&gateclk 1>; status = "disabled"; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 5b902f9a3af2..1ee8540b0eba 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -88,7 +88,7 @@ ethernet@30000 { compatible = "marvell,armada-370-neta"; - reg = <0x30000 0x2500>; + reg = <0x30000 0x4000>; interrupts = <12>; clocks = <&gateclk 2>; status = "disabled"; diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts index 9bf49b3826ea..d347082d28f3 100644 --- a/arch/arm/boot/dts/msm8660-surf.dts +++ b/arch/arm/boot/dts/msm8660-surf.dts @@ -15,7 +15,7 @@ < 0x02081000 0x1000 >; }; - timer@2000004 { + timer@2000000 { compatible = "qcom,scss-timer", "qcom,msm-timer"; interrupts = <1 0 0x301>, <1 1 0x301>, @@ -26,7 +26,7 @@ cpu-offset = <0x40000>; }; - serial@19c400000 { + serial@19c40000 { compatible = "qcom,msm-hsuart", "qcom,msm-uart"; reg = <0x19c40000 0x1000>, <0x19c00000 0x1000>; diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts index 2e4d87a125d6..7c9ef9b80c15 100644 --- a/arch/arm/boot/dts/msm8960-cdp.dts +++ b/arch/arm/boot/dts/msm8960-cdp.dts @@ -26,7 +26,7 @@ cpu-offset = <0x80000>; }; - serial@19c400000 { + serial@16440000 { compatible = "qcom,msm-hsuart", "qcom,msm-uart"; reg = <0x16440000 0x1000>, <0x16400000 0x1000>; diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 02802386b894..699b71e7f7ec 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -163,6 +163,7 @@ config MACH_SAMA5_DT bool "Atmel SAMA5 Evaluation Kits with device-tree support" depends on SOC_SAMA5 select USE_OF + select PHYLIB if NETDEVICES help Select this if you want to experiment device-tree with an Atmel Evaluation Kit. diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index d193a409bc45..9eb574397ee1 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -332,10 +332,6 @@ static void __init at91rm9200_initialize(void) { arm_pm_idle = at91rm9200_idle; arm_pm_restart = at91rm9200_restart; - at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) - | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) - | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5) - | (1 << AT91RM9200_ID_IRQ6); /* Initialize GPIO subsystem */ at91_gpio_init(at91rm9200_gpio, @@ -388,6 +384,10 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { AT91_SOC_START(at91rm9200) .map_io = at91rm9200_map_io, .default_irq_priority = at91rm9200_default_irq_priority, + .extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) + | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) + | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5) + | (1 << AT91RM9200_ID_IRQ6), .ioremap_registers = at91rm9200_ioremap_registers, .register_clocks = at91rm9200_register_clocks, .init = at91rm9200_initialize, diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index a8ce24538da6..5de6074b4f4f 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -348,8 +348,6 @@ static void __init at91sam9260_initialize(void) { arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9_alt_restart; - at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) - | (1 << AT91SAM9260_ID_IRQ2); /* Register GPIO subsystem */ at91_gpio_init(at91sam9260_gpio, 3); @@ -400,6 +398,8 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { AT91_SOC_START(at91sam9260) .map_io = at91sam9260_map_io, .default_irq_priority = at91sam9260_default_irq_priority, + .extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) + | (1 << AT91SAM9260_ID_IRQ2), .ioremap_registers = at91sam9260_ioremap_registers, .register_clocks = at91sam9260_register_clocks, .init = at91sam9260_initialize, diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 25efb5ac30f1..0e0793241ab7 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -290,8 +290,6 @@ static void __init at91sam9261_initialize(void) { arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9_alt_restart; - at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) - | (1 << AT91SAM9261_ID_IRQ2); /* Register GPIO subsystem */ at91_gpio_init(at91sam9261_gpio, 3); @@ -342,6 +340,8 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { AT91_SOC_START(at91sam9261) .map_io = at91sam9261_map_io, .default_irq_priority = at91sam9261_default_irq_priority, + .extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) + | (1 << AT91SAM9261_ID_IRQ2), .ioremap_registers = at91sam9261_ioremap_registers, .register_clocks = at91sam9261_register_clocks, .init = at91sam9261_initialize, diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index f44ffd2105a7..6ce7d1850893 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -327,7 +327,6 @@ static void __init at91sam9263_initialize(void) { arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9_alt_restart; - at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); /* Register GPIO subsystem */ at91_gpio_init(at91sam9263_gpio, 5); @@ -378,6 +377,7 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { AT91_SOC_START(at91sam9263) .map_io = at91sam9263_map_io, .default_irq_priority = at91sam9263_default_irq_priority, + .extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1), .ioremap_registers = at91sam9263_ioremap_registers, .register_clocks = at91sam9263_register_clocks, .init = at91sam9263_initialize, diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 8b7fce067652..fda502691686 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -374,7 +374,6 @@ static void __init at91sam9g45_initialize(void) { arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9g45_restart; - at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0); /* Register GPIO subsystem */ at91_gpio_init(at91sam9g45_gpio, 5); @@ -425,6 +424,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { AT91_SOC_START(at91sam9g45) .map_io = at91sam9g45_map_io, .default_irq_priority = at91sam9g45_default_irq_priority, + .extern_irq = (1 << AT91SAM9G45_ID_IRQ0), .ioremap_registers = at91sam9g45_ioremap_registers, .register_clocks = at91sam9g45_register_clocks, .init = at91sam9g45_initialize, diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index f77fae5591bc..d4ec0d9a9872 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -293,7 +293,6 @@ static void __init at91sam9rl_initialize(void) { arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9_alt_restart; - at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); /* Register GPIO subsystem */ at91_gpio_init(at91sam9rl_gpio, 4); @@ -344,6 +343,7 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { AT91_SOC_START(at91sam9rl) .map_io = at91sam9rl_map_io, .default_irq_priority = at91sam9rl_default_irq_priority, + .extern_irq = (1 << AT91SAM9RL_ID_IRQ0), .ioremap_registers = at91sam9rl_ioremap_registers, .register_clocks = at91sam9rl_register_clocks, .init = at91sam9rl_initialize, diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index 19ca79396905..bad94b84a46f 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -55,8 +55,6 @@ static void at91x40_idle(void) void __init at91x40_initialize(unsigned long main_clock) { arm_pm_idle = at91x40_idle; - at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1) - | (1 << AT91X40_ID_IRQ2); } /* @@ -86,9 +84,10 @@ static unsigned int at91x40_default_irq_priority[NR_AIC_IRQS] __initdata = { void __init at91x40_init_interrupts(unsigned int priority[NR_AIC_IRQS]) { + u32 extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1) + | (1 << AT91X40_ID_IRQ2); if (!priority) priority = at91x40_default_irq_priority; - at91_aic_init(priority, at91_extern_irq); + at91_aic_init(priority, extern_irq); } - diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c index 705305e62bbc..ad95f6a23a28 100644 --- a/arch/arm/mach-at91/board-dt-sama5.c +++ b/arch/arm/mach-at91/board-dt-sama5.c @@ -62,7 +62,8 @@ static int ksz9021rn_phy_fixup(struct phy_device *phy) static void __init sama5_dt_device_init(void) { - if (of_machine_is_compatible("atmel,sama5d3xcm")) + if (of_machine_is_compatible("atmel,sama5d3xcm") && + IS_ENABLED(CONFIG_PHYLIB)) phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, ksz9021rn_phy_fixup); diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index da841885d01c..6b2630a92f71 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -75,7 +75,7 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); #define cpu_has_pllb() (!(cpu_is_at91sam9rl() \ || cpu_is_at91sam9g45() \ || cpu_is_at91sam9x5() \ - || cpu_is_at91sam9n12())) + || cpu_is_sama5d3())) #define cpu_has_upll() (cpu_is_at91sam9g45() \ || cpu_is_at91sam9x5() \ @@ -489,7 +489,7 @@ static int at91_clk_show(struct seq_file *s, void *unused) seq_printf(s, "UCKR = %8x\n", uckr); } seq_printf(s, "MCKR = %8x\n", at91_pmc_read(AT91_PMC_MCKR)); - if (cpu_has_upll()) + if (cpu_has_upll() || cpu_is_at91sam9n12()) seq_printf(s, "USB = %8x\n", at91_pmc_read(AT91_PMC_USB)); seq_printf(s, "SR = %8x\n", sr); @@ -614,6 +614,8 @@ static u32 __init at91_usb_rate(struct clk *pll, u32 freq, u32 reg) { if (pll == &pllb && (reg & AT91_PMC_USB96M)) return freq / 2; + else if (pll == &utmi_clk || cpu_is_at91sam9n12()) + return freq / (1 + ((reg & AT91_PMC_OHCIUSBDIV) >> 8)); else return freq; } @@ -683,6 +685,8 @@ static struct clk *const standard_pmc_clocks[] __initconst = { /* PLLB generated USB full speed clock init */ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) { + unsigned int reg; + /* * USB clock init: choose 48 MHz PLLB value, * disable 48MHz clock during usb peripheral suspend. @@ -691,22 +695,35 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) */ uhpck.parent = &pllb; - at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M; + reg = at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2); pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init); if (cpu_is_at91rm9200()) { + reg = at91_pllb_usb_init |= AT91_PMC_USB96M; uhpck.pmc_mask = AT91RM9200_PMC_UHP; udpck.pmc_mask = AT91RM9200_PMC_UDP; at91_pmc_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20() || cpu_is_at91sam9g10()) { + reg = at91_pllb_usb_init |= AT91_PMC_USB96M; + uhpck.pmc_mask = AT91SAM926x_PMC_UHP; + udpck.pmc_mask = AT91SAM926x_PMC_UDP; + } else if (cpu_is_at91sam9n12()) { + /* Divider for USB clock is in USB clock register for 9n12 */ + reg = AT91_PMC_USBS_PLLB; + + /* For PLLB output 96M, set usb divider 2 (USBDIV + 1) */ + reg |= AT91_PMC_OHCIUSBDIV_2; + at91_pmc_write(AT91_PMC_USB, reg); + + /* Still setup masks */ uhpck.pmc_mask = AT91SAM926x_PMC_UHP; udpck.pmc_mask = AT91SAM926x_PMC_UDP; } at91_pmc_write(AT91_CKGR_PLLBR, 0); - udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); - uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); + udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, reg); + uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, reg); } /* UPLL generated USB full speed clock init */ @@ -725,8 +742,7 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock) /* Now set uhpck values */ uhpck.parent = &utmi_clk; uhpck.pmc_mask = AT91SAM926x_PMC_UHP; - uhpck.rate_hz = utmi_clk.rate_hz; - uhpck.rate_hz /= 1 + ((at91_pmc_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8); + uhpck.rate_hz = at91_usb_rate(&utmi_clk, utmi_clk.rate_hz, usbr); } static int __init at91_pmc_init(unsigned long main_clock) diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c index 69f9e3bbf4e5..4ec6a6d9b9be 100644 --- a/arch/arm/mach-at91/cpuidle.c +++ b/arch/arm/mach-at91/cpuidle.c @@ -51,7 +51,7 @@ static struct cpuidle_driver at91_idle_driver = { .states[1] = { .enter = at91_enter_idle, .exit_latency = 10, - .target_residency = 100000, + .target_residency = 10000, .flags = CPUIDLE_FLAG_TIME_VALID, .name = "RAM_SR", .desc = "WFI and DDR Self Refresh", diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 78ab06548658..f6de36aefe85 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -85,4 +85,4 @@ extern void __init at91_gpio_irq_setup(void); extern int __init at91_gpio_of_irq_setup(struct device_node *node, struct device_node *parent); -extern int at91_extern_irq; +extern u32 at91_get_extern_irq(void); diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 2bd7f51b0b82..c604cc69acb5 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -130,7 +130,10 @@ extern void __iomem *at91_pmc_base; #define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */ #define AT91_PMC_USBS_PLLA (0 << 0) #define AT91_PMC_USBS_UPLL (1 << 0) +#define AT91_PMC_USBS_PLLB (1 << 0) /* [AT91SAMN12 only] */ #define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */ +#define AT91_PMC_OHCIUSBDIV_1 (0x0 << 8) +#define AT91_PMC_OHCIUSBDIV_2 (0x1 << 8) #define AT91_PMC_SMD 0x3c /* Soft Modem Clock Register [some SAM9 only] */ #define AT91_PMC_SMDS (0x1 << 0) /* SMD input clock selection */ diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index e0ca59171022..3d192c5aee66 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -232,7 +232,14 @@ static void __maybe_unused at91_aic5_eoi(struct irq_data *d) at91_aic_write(AT91_AIC5_EOICR, 0); } -unsigned long *at91_extern_irq; +static unsigned long *at91_extern_irq; + +u32 at91_get_extern_irq(void) +{ + if (!at91_extern_irq) + return 0; + return *at91_extern_irq; +} #define is_extern_irq(hwirq) test_bit(hwirq, at91_extern_irq) diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 530db304ec5e..15afb5d9271f 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -212,7 +212,7 @@ static int at91_pm_enter(suspend_state_t state) (at91_pmc_read(AT91_PMC_PCSR) | (1 << AT91_ID_FIQ) | (1 << AT91_ID_SYS) - | (at91_extern_irq)) + | (at91_get_extern_irq())) & at91_aic_read(AT91_AIC_IMR), state); diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index e2f4bdd146d6..b17fbcf4d9e8 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -48,7 +48,7 @@ void __init at91_init_irq_default(void) void __init at91_init_interrupts(unsigned int *priority) { /* Initialize the AIC interrupt controller */ - at91_aic_init(priority, at91_extern_irq); + at91_aic_init(priority, at91_boot_soc.extern_irq); /* Enable GPIO interrupts */ at91_gpio_irq_setup(); @@ -80,7 +80,7 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length) desc->pfn = __phys_to_pfn(base); desc->length = length; - desc->type = MT_DEVICE; + desc->type = MT_MEMORY_NONCACHED; pr_info("AT91: sram at 0x%lx of 0x%x mapped at 0x%lx\n", base, length, desc->virtual); diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index 43a225f9e713..a1e1482c6da8 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -6,6 +6,7 @@ struct at91_init_soc { int builtin; + u32 extern_irq; unsigned int *default_irq_priority; void (*map_io)(void); void (*ioremap_registers)(void); diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 739be7e738fe..513eee14f77d 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -151,7 +151,6 @@ static __init void davinci_sffsdr_init(void) } MACHINE_START(SFFSDR, "Lyrtech SFFSDR") - /* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */ .atag_offset = 0x100, .map_io = davinci_sffsdr_map_io, .init_irq = davinci_irq_init, diff --git a/arch/arm/mach-msm/clock-debug.c b/arch/arm/mach-msm/clock-debug.c index 4886404d42f5..b0fbdf1cbdd1 100644 --- a/arch/arm/mach-msm/clock-debug.c +++ b/arch/arm/mach-msm/clock-debug.c @@ -104,7 +104,7 @@ int __init clock_debug_add(struct clk *clock) if (!debugfs_base) return -ENOMEM; - strncpy(temp, clock->dbg_name, ARRAY_SIZE(temp)-1); + strlcpy(temp, clock->dbg_name, ARRAY_SIZE(temp)); for (ptr = temp; *ptr; ptr++) *ptr = tolower(*ptr); diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 4dc2fbba0ecd..3a66635e7d17 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -3,7 +3,6 @@ config SOC_IMX23 select ARM_AMBA select ARM_CPU_SUSPEND if PM select CPU_ARM926T - select HAVE_PWM select PINCTRL_IMX23 config SOC_IMX28 @@ -12,7 +11,6 @@ config SOC_IMX28 select ARM_CPU_SUSPEND if PM select CPU_ARM926T select HAVE_CAN_FLEXCAN if CAN - select HAVE_PWM select PINCTRL_IMX28 config ARCH_MXS diff --git a/arch/arm/mach-mxs/pm.h b/arch/arm/mach-mxs/pm.h index f57e7cdece2e..09d77b00a96b 100644 --- a/arch/arm/mach-mxs/pm.h +++ b/arch/arm/mach-mxs/pm.h @@ -9,6 +9,10 @@ #ifndef __ARCH_MXS_PM_H #define __ARCH_MXS_PM_H +#ifdef CONFIG_PM void mxs_pm_init(void); +#else +#define mxs_pm_init NULL +#endif #endif diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index ee6218c74807..d4622ed26252 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -293,7 +293,8 @@ static struct regulator_consumer_supply cm_t35_vsim_supply[] = { static struct regulator_consumer_supply cm_t35_vio_supplies[] = { REGULATOR_SUPPLY("vcc", "spi1.0"), REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 576420544178..f1d91ba5d1ac 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -222,6 +222,7 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = { static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"), REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), }; diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d0d17bc58d9b..62e4f701b63b 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -272,7 +272,8 @@ static struct regulator_init_data ldp_vaux1 = { static struct regulator_consumer_supply ldp_vpll2_supplies[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), }; static struct regulator_init_data ldp_vpll2 = { diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 28133d5b4fed..b1547a0edfcd 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -343,6 +343,7 @@ static struct regulator_consumer_supply pandora_vmmc3_supply[] = { static struct regulator_consumer_supply pandora_vdds_supplies[] = { REGULATOR_SUPPLY("vdds_sdi", "omapdss"), REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"), REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), }; diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 18ca61e300b3..9c2dd102fbbb 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -553,6 +553,7 @@ static struct regulator_consumer_supply rx51_vio_supplies[] = { static struct regulator_consumer_supply rx51_vaux1_consumers[] = { REGULATOR_SUPPLY("vdds_sdi", "omapdss"), + REGULATOR_SUPPLY("vdds_sdi", "omapdss_sdi.0"), /* Si4713 supply */ REGULATOR_SUPPLY("vdd", "2-0063"), /* lis3lv02d */ diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 2adb2683f074..31e0dfe4a4ea 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -249,6 +249,7 @@ void omap_ctrl_write_dsp_boot_addr(u32 bootaddr) u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTADDR : cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTADDR : cpu_is_omap44xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR : + soc_is_omap54xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR : 0; if (!offset) { diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 4269fc145698..daa0ff65f599 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -374,10 +374,8 @@ static void __init omap_init_mcpdm(void) struct platform_device *pdev; oh = omap_hwmod_lookup("mcpdm"); - if (!oh) { - printk(KERN_ERR "Could not look up mcpdm hw_mod\n"); + if (!oh) return; - } pdev = omap_device_build("omap-mcpdm", -1, oh, NULL, 0); WARN(IS_ERR(pdev), "Can't build omap_device for omap-mcpdm.\n"); @@ -395,10 +393,8 @@ static void __init omap_init_dmic(void) struct platform_device *pdev; oh = omap_hwmod_lookup("dmic"); - if (!oh) { - pr_err("Could not look up dmic hw_mod\n"); + if (!oh) return; - } pdev = omap_device_build("omap-dmic", -1, oh, NULL, 0); WARN(IS_ERR(pdev), "Can't build omap_device for omap-dmic.\n"); @@ -421,10 +417,8 @@ static void __init omap_init_hdmi_audio(void) struct platform_device *pdev; oh = omap_hwmod_lookup("dss_hdmi"); - if (!oh) { - printk(KERN_ERR "Could not look up dss_hdmi hw_mod\n"); + if (!oh) return; - } pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0); WARN(IS_ERR(pdev), diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 1272c41d4749..54e4c16ce539 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -601,7 +601,7 @@ void __init omap2_set_globals_tap(u32 class, void __iomem *tap) #ifdef CONFIG_SOC_BUS -static const char const *omap_types[] = { +static const char * const omap_types[] = { [OMAP2_DEVICE_TYPE_TEST] = "TST", [OMAP2_DEVICE_TYPE_EMU] = "EMU", [OMAP2_DEVICE_TYPE_SEC] = "HS", diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index f6601563aa69..a7cf8d783bd0 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -176,6 +176,9 @@ static char *cmdline_find_option(char *str) static int __init omap_serial_early_init(void) { + if (of_have_populated_dt()) + return -ENODEV; + do { char oh_name[MAX_UART_HWMOD_NAME_LEN]; struct omap_hwmod *oh; diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 51e138cc5398..c05898fbd634 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -140,6 +140,7 @@ static struct regulator_init_data omap3_vdac_idata = { static struct regulator_consumer_supply omap3_vpll2_supplies[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"), REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), }; diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index aa27d7f5cbb7..609b330e5110 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -28,6 +28,7 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/usb/phy.h> +#include <linux/usb/nop-usb-xceiv.h> #include "soc.h" #include "omap_device.h" @@ -560,7 +561,8 @@ static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply, struct regulator_init_data *reg_data; struct fixed_voltage_config *config; struct platform_device *pdev; - int ret; + struct platform_device_info pdevinfo; + int ret = -ENOMEM; supplies = kzalloc(sizeof(*supplies), GFP_KERNEL); if (!supplies) @@ -571,7 +573,7 @@ static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply, reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL); if (!reg_data) - return -ENOMEM; + goto err_data; reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS; reg_data->consumer_supplies = supplies; @@ -580,39 +582,53 @@ static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply, config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config), GFP_KERNEL); if (!config) - return -ENOMEM; + goto err_config; + + config->supply_name = kstrdup(name, GFP_KERNEL); + if (!config->supply_name) + goto err_supplyname; - config->supply_name = name; config->gpio = gpio; config->enable_high = polarity; config->init_data = reg_data; /* create a regulator device */ - pdev = kzalloc(sizeof(*pdev), GFP_KERNEL); - if (!pdev) - return -ENOMEM; + memset(&pdevinfo, 0, sizeof(pdevinfo)); + pdevinfo.name = reg_name; + pdevinfo.id = PLATFORM_DEVID_AUTO; + pdevinfo.data = config; + pdevinfo.size_data = sizeof(*config); - pdev->id = PLATFORM_DEVID_AUTO; - pdev->name = reg_name; - pdev->dev.platform_data = config; + pdev = platform_device_register_full(&pdevinfo); + if (IS_ERR(pdev)) { + ret = PTR_ERR(pdev); + pr_err("%s: Failed registering regulator %s for %s : %d\n", + __func__, name, dev_id, ret); + goto err_register; + } - ret = platform_device_register(pdev); - if (ret) - pr_err("%s: Failed registering regulator %s for %s\n", - __func__, name, dev_id); + return 0; +err_register: + kfree(config->supply_name); +err_supplyname: + kfree(config); +err_config: + kfree(reg_data); +err_data: + kfree(supplies); return ret; } +#define MAX_STR 20 + int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) { - char *rail_name; - int i, len; + char rail_name[MAX_STR]; + int i; struct platform_device *pdev; char *phy_id; - - /* the phy_id will be something like "nop_usb_xceiv.1" */ - len = strlen(nop_name) + 3; /* 3 -> ".1" and NULL terminator */ + struct platform_device_info pdevinfo; for (i = 0; i < num_phys; i++) { @@ -627,25 +643,26 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) !gpio_is_valid(phy->vcc_gpio)) continue; - /* create a NOP PHY device */ - pdev = kzalloc(sizeof(*pdev), GFP_KERNEL); - if (!pdev) - return -ENOMEM; - - pdev->id = phy->port; - pdev->name = nop_name; - pdev->dev.platform_data = phy->platform_data; - - phy_id = kmalloc(len, GFP_KERNEL); - if (!phy_id) + phy_id = kmalloc(MAX_STR, GFP_KERNEL); + if (!phy_id) { + pr_err("%s: kmalloc() failed\n", __func__); return -ENOMEM; + } - scnprintf(phy_id, len, "nop_usb_xceiv.%d\n", - pdev->id); - - if (platform_device_register(pdev)) { - pr_err("%s: Failed to register device %s\n", - __func__, phy_id); + /* create a NOP PHY device */ + memset(&pdevinfo, 0, sizeof(pdevinfo)); + pdevinfo.name = nop_name; + pdevinfo.id = phy->port; + pdevinfo.data = phy->platform_data; + pdevinfo.size_data = sizeof(struct nop_usb_xceiv_platform_data); + + scnprintf(phy_id, MAX_STR, "nop_usb_xceiv.%d", + phy->port); + pdev = platform_device_register_full(&pdevinfo); + if (IS_ERR(pdev)) { + pr_err("%s: Failed to register device %s : %ld\n", + __func__, phy_id, PTR_ERR(pdev)); + kfree(phy_id); continue; } @@ -653,26 +670,15 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) /* Do we need RESET regulator ? */ if (gpio_is_valid(phy->reset_gpio)) { - - rail_name = kmalloc(13, GFP_KERNEL); - if (!rail_name) - return -ENOMEM; - - scnprintf(rail_name, 13, "hsusb%d_reset", phy->port); - + scnprintf(rail_name, MAX_STR, + "hsusb%d_reset", phy->port); usbhs_add_regulator(rail_name, phy_id, "reset", phy->reset_gpio, 1); } /* Do we need VCC regulator ? */ if (gpio_is_valid(phy->vcc_gpio)) { - - rail_name = kmalloc(13, GFP_KERNEL); - if (!rail_name) - return -ENOMEM; - - scnprintf(rail_name, 13, "hsusb%d_vcc", phy->port); - + scnprintf(rail_name, MAX_STR, "hsusb%d_vcc", phy->port); usbhs_add_regulator(rail_name, phy_id, "vcc", phy->vcc_gpio, phy->vcc_polarity); } diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c index 4f94cd87972a..e588c2152133 100644 --- a/arch/arm/mach-prima2/common.c +++ b/arch/arm/mach-prima2/common.c @@ -17,16 +17,6 @@ #include <linux/of_platform.h> #include "common.h" -static struct of_device_id sirfsoc_of_bus_ids[] __initdata = { - { .compatible = "simple-bus", }, - {}, -}; - -void __init sirfsoc_mach_init(void) -{ - of_platform_bus_probe(NULL, sirfsoc_of_bus_ids, NULL); -} - void __init sirfsoc_init_late(void) { sirfsoc_pm_init(); @@ -57,7 +47,6 @@ DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)") .map_io = sirfsoc_map_io, .init_irq = irqchip_init, .init_time = sirfsoc_init_time, - .init_machine = sirfsoc_mach_init, .init_late = sirfsoc_init_late, .dt_compat = atlas6_dt_match, .restart = sirfsoc_restart, @@ -66,8 +55,8 @@ MACHINE_END #ifdef CONFIG_ARCH_PRIMA2 static const char *prima2_dt_match[] __initdata = { - "sirf,prima2", - NULL + "sirf,prima2", + NULL }; DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)") @@ -77,7 +66,6 @@ DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)") .init_irq = irqchip_init, .init_time = sirfsoc_init_time, .dma_zone_size = SZ_256M, - .init_machine = sirfsoc_mach_init, .init_late = sirfsoc_init_late, .dt_compat = prima2_dt_match, .restart = sirfsoc_restart, @@ -96,7 +84,6 @@ DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)") .map_io = sirfsoc_map_io, .init_irq = irqchip_init, .init_time = sirfsoc_init_time, - .init_machine = sirfsoc_mach_init, .init_late = sirfsoc_init_late, .dt_compat = marco_dt_match, .restart = sirfsoc_restart, diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c index 8f595c0cc8d9..02cc34388b05 100644 --- a/arch/arm/mach-prima2/pm.c +++ b/arch/arm/mach-prima2/pm.c @@ -9,7 +9,7 @@ #include <linux/kernel.h> #include <linux/suspend.h> #include <linux/slab.h> -#include <linux/module.h> +#include <linux/export.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_device.h> diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c index 32360e540ce6..eb3fa4aee0e4 100644 --- a/arch/arm/mach-tegra/pmc.c +++ b/arch/arm/mach-tegra/pmc.c @@ -234,7 +234,7 @@ static const struct of_device_id matches[] __initconst = { { } }; -static void tegra_pmc_parse_dt(void) +static void __init tegra_pmc_parse_dt(void) { struct device_node *np; u32 prop; |