diff options
Diffstat (limited to 'arch/arm')
106 files changed, 730 insertions, 1254 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 06e0adf2368e..fce168333036 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1604,8 +1604,8 @@ config NR_CPUS default "4" config HOTPLUG_CPU - bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" - depends on SMP && HOTPLUG && EXPERIMENTAL + bool "Support for hot-pluggable CPUs" + depends on SMP && HOTPLUG help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. @@ -1646,8 +1646,8 @@ config HZ default 100 config THUMB2_KERNEL - bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)" - depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL + bool "Compile the kernel in Thumb-2 mode" + depends on CPU_V7 && !CPU_V6 && !CPU_V6K select AEABI select ARM_ASM_UNIFIED select ARM_UNWIND @@ -1851,6 +1851,7 @@ config XEN_DOM0 config XEN bool "Xen guest support on ARM (EXPERIMENTAL)" depends on EXPERIMENTAL && ARM && OF + depends on CPU_V7 && !CPU_V6 help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index f023e3acdfbd..5f914fca911b 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -21,8 +21,6 @@ endif OBJCOPYFLAGS :=-O binary -R .comment -S GZFLAGS :=-9 #KBUILD_CFLAGS +=-pipe -# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb: -KBUILD_CFLAGS +=$(call cc-option,-marm,) # Never generate .eh_frame KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm) @@ -105,17 +103,20 @@ endif ifeq ($(CONFIG_THUMB2_KERNEL),y) AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it) AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W) -CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) -AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb +CFLAGS_ISA :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) +AFLAGS_ISA :=$(CFLAGS_ISA) -Wa$(comma)-mthumb # Work around buggy relocation from gas if requested: ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y) CFLAGS_MODULE +=-fno-optimize-sibling-calls endif +else +CFLAGS_ISA :=$(call cc-option,-marm,) +AFLAGS_ISA :=$(CFLAGS_ISA) endif # Need -Uarm for gcc < 3.x -KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm -KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float +KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm +KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float CHECKFLAGS += -D__arm__ diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 3fdab016aa5c..f2aa09eb658e 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -33,7 +33,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y) $(obj)/xipImage: vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' + $(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' $(obj)/Image $(obj)/zImage: FORCE @echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)' @@ -48,14 +48,14 @@ $(obj)/xipImage: FORCE $(obj)/Image: vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + $(kecho) ' Kernel: $@ is ready' $(obj)/compressed/vmlinux: $(obj)/Image FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed $@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + $(kecho) ' Kernel: $@ is ready' endif @@ -90,7 +90,7 @@ fi $(obj)/uImage: $(obj)/zImage FORCE @$(check_for_multiple_loadaddr) $(call if_changed,uimage) - @echo ' Image $@ is ready' + $(kecho) ' Image $@ is ready' $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(Q)$(MAKE) $(build)=$(obj)/bootp $@ @@ -98,7 +98,7 @@ $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + $(kecho) ' Kernel: $@ is ready' PHONY += initrd FORCE initrd: diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f37cf9fa5fa0..a9d8a10d1ac6 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -77,7 +77,8 @@ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_U8500) += snowball.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ - sh73a0-kzm9g.dtb + sh73a0-kzm9g.dtb \ + sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \ spear1340-evb.dtb dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index b06c0db273b1..e6391a4e6649 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -126,14 +126,14 @@ #size-cells = <0>; btn3 { - label = "Buttin 3"; + label = "Button 3"; gpios = <&pioA 30 1>; linux,code = <0x103>; gpio-key,wakeup; }; btn4 { - label = "Buttin 4"; + label = "Button 4"; gpios = <&pioA 31 1>; linux,code = <0x104>; gpio-key,wakeup; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 748ba7aa746c..4b0e0ca08f40 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -483,6 +483,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80004000 0x1000>; interrupts = <0 21 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -494,6 +496,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80122000 0x1000>; interrupts = <0 22 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -505,6 +509,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80128000 0x1000>; interrupts = <0 55 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -516,6 +522,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80110000 0x1000>; interrupts = <0 12 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -527,6 +535,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x8012a000 0x1000>; interrupts = <0 51 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -573,33 +583,38 @@ interrupts = <0 60 0x4>; status = "disabled"; }; + sdi@80118000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80118000 0x1000>; interrupts = <0 50 0x4>; status = "disabled"; }; + sdi@80005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80005000 0x1000>; interrupts = <0 41 0x4>; status = "disabled"; }; + sdi@80119000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80119000 0x1000>; interrupts = <0 59 0x4>; status = "disabled"; }; + sdi@80114000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80114000 0x1000>; interrupts = <0 99 0x4>; status = "disabled"; }; + sdi@80008000 { compatible = "arm,pl18x", "arm,primecell"; - reg = <0x80114000 0x1000>; + reg = <0x80008000 0x1000>; interrupts = <0 100 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 73567b843e72..a21511c14071 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -20,8 +20,10 @@ compatible = "samsung,trats", "samsung,exynos4210"; memory { - reg = <0x40000000 0x20000000 - 0x60000000 0x20000000>; + reg = <0x40000000 0x10000000 + 0x50000000 0x10000000 + 0x60000000 0x10000000 + 0x70000000 0x10000000>; }; chosen { diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 9ca4ca70c1bc..6d31aa383460 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -69,6 +69,7 @@ interrupts = <13>, <56>; interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 34>; + clock-names = "gpmi_io"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index e16d63155480..55c57ea6169e 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -85,6 +85,7 @@ interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 50>; + clock-names = "gpmi_io"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index f38ea8771b44..696e929d0304 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -257,7 +257,7 @@ interrupt-names = "common", "tx", "rx", "sidetone"; interrupt-parent = <&intc>; ti,buffer-size = <1280>; - ti,hwmods = "mcbsp2"; + ti,hwmods = "mcbsp2", "mcbsp2_sidetone"; }; mcbsp3: mcbsp@49024000 { @@ -272,7 +272,7 @@ interrupt-names = "common", "tx", "rx", "sidetone"; interrupt-parent = <&intc>; ti,buffer-size = <128>; - ti,hwmods = "mcbsp3"; + ti,hwmods = "mcbsp3", "mcbsp3_sidetone"; }; mcbsp4: mcbsp@49026000 { diff --git a/arch/arm/boot/dts/sh7372-mackerel.dts b/arch/arm/boot/dts/sh7372-mackerel.dts new file mode 100644 index 000000000000..286f0caef013 --- /dev/null +++ b/arch/arm/boot/dts/sh7372-mackerel.dts @@ -0,0 +1,22 @@ +/* + * Device Tree Source for the mackerel board + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "skeleton.dtsi" + +/ { + model = "Mackerel (AP4 EVM 2nd)"; + compatible = "renesas,mackerel"; + + memory { + device_type = "memory"; + reg = <0x40000000 0x10000000>; + }; +}; diff --git a/arch/arm/configs/ap4evb_defconfig b/arch/arm/configs/ap4evb_defconfig index 2eef85e3c9b9..66894f736d04 100644 --- a/arch/arm/configs/ap4evb_defconfig +++ b/arch/arm/configs/ap4evb_defconfig @@ -46,7 +46,6 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index f78d259f8d23..a18593d03b17 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -20,7 +20,7 @@ CONFIG_MACH_ARMADILLO800EVA=y # CONFIG_SH_TIMER_TMU is not set CONFIG_ARM_THUMB=y CONFIG_CPU_BPREDICT_DISABLE=y -# CONFIG_CACHE_L2X0 is not set +CONFIG_CACHE_L2X0=y CONFIG_ARM_ERRATA_430973=y CONFIG_ARM_ERRATA_458693=y CONFIG_ARM_ERRATA_460075=y diff --git a/arch/arm/configs/g3evm_defconfig b/arch/arm/configs/g3evm_defconfig deleted file mode 100644 index 4a336ab5a0c0..000000000000 --- a/arch/arm/configs/g3evm_defconfig +++ /dev/null @@ -1,57 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE=y -CONFIG_ARCH_SH7367=y -CONFIG_MACH_G3EVM=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200" -CONFIG_KEXEC=y -CONFIG_PM=y -# CONFIG_SUSPEND is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=8 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_FTRACE is not set -# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/g4evm_defconfig b/arch/arm/configs/g4evm_defconfig deleted file mode 100644 index 21c6d0307bc3..000000000000 --- a/arch/arm/configs/g4evm_defconfig +++ /dev/null @@ -1,57 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE=y -CONFIG_ARCH_SH7377=y -CONFIG_MACH_G4EVM=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttySC4,115200 earlyprintk=sh-sci.4,115200" -CONFIG_KEXEC=y -CONFIG_PM=y -# CONFIG_SUSPEND is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=8 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_FTRACE is not set -# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 66aa7a6db884..394ded624e37 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -139,6 +139,7 @@ CONFIG_I2C_IMX=y CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_MC9S08DZ60=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y @@ -155,6 +156,7 @@ CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_OV2640=y CONFIG_VIDEO_MX3=y CONFIG_FB=y +CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y diff --git a/arch/arm/configs/kota2_defconfig b/arch/arm/configs/kota2_defconfig index b7735d6347ac..fa83db1ef0eb 100644 --- a/arch/arm/configs/kota2_defconfig +++ b/arch/arm/configs/kota2_defconfig @@ -112,7 +112,6 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_RENESAS_TPU=y CONFIG_LEDS_TRIGGERS=y # CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig index c88b57886e79..afbae287436b 100644 --- a/arch/arm/configs/kzm9g_defconfig +++ b/arch/arm/configs/kzm9g_defconfig @@ -74,6 +74,8 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ST1232=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_ADXL34X=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=9 @@ -119,8 +121,9 @@ CONFIG_DMADEVICES=y CONFIG_SH_DMAE=y CONFIG_ASYNC_TX_DMA=y CONFIG_STAGING=y +CONFIG_SENSORS_AK8975=y +CONFIG_IIO=y # CONFIG_DNOTIFY is not set -CONFIG_INOTIFY_USER=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set diff --git a/arch/arm/configs/mackerel_defconfig b/arch/arm/configs/mackerel_defconfig index 306a2e2d3622..2098ce155542 100644 --- a/arch/arm/configs/mackerel_defconfig +++ b/arch/arm/configs/mackerel_defconfig @@ -70,17 +70,31 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=8 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_SH_MOBILE=y # CONFIG_HWMON is not set # CONFIG_MFD_SUPPORT is not set CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_SH_MOBILE_LCDC=y +CONFIG_FB_SH_MOBILE_HDMI=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_CLUT224 is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_SOC_SH4_FSI=y +CONFIG_USB=y +CONFIG_USB_RENESAS_USBHS_HCD=y +CONFIG_USB_RENESAS_USBHS=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_RENESAS_USBHS_UDC=y +CONFIG_DMADEVICES=y +CONFIG_SH_DMAE=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -91,7 +105,6 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y # CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 53382b6c8bb4..5b8215f424c5 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -69,6 +69,10 @@ CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=6 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_RCAR=y +CONFIG_SPI=y +CONFIG_SPI_SH_HSPI=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_THERMAL=y diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index 7bcf850eddcd..3458752c4bb2 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -1,6 +1,6 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y @@ -9,10 +9,12 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_MVEBU=y -CONFIG_MACH_ARMADA_370_XP=y +CONFIG_MACH_ARMADA_370=y +CONFIG_MACH_ARMADA_XP=y +# CONFIG_CACHE_L2X0 is not set CONFIG_AEABI=y CONFIG_HIGHMEM=y -CONFIG_USE_OF=y +# CONFIG_COMPACTION is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y @@ -23,6 +25,8 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index cdd4d2bd3962..2ba9e63d0f17 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -1,3 +1,4 @@ +CONFIG_ARCH_VERSATILE=y CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h index 59426a4595c9..e847d23351ed 100644 --- a/arch/arm/include/asm/flat.h +++ b/arch/arm/include/asm/flat.h @@ -8,7 +8,7 @@ #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) -#define flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp) +#define flat_get_addr_from_rp(rp, relval, flags, persistent) ((void)persistent,get_unaligned(rp)) #define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) #define flat_get_relocate_addr(rel) (rel) #define flat_set_persistent(relval, p) 0 diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 77bd79f2ffdb..7e1f76027f66 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -200,8 +200,8 @@ extern int __put_user_8(void *, unsigned long long); #define USER_DS KERNEL_DS #define segment_eq(a,b) (1) -#define __addr_ok(addr) (1) -#define __range_ok(addr,size) (0) +#define __addr_ok(addr) ((void)(addr),1) +#define __range_ok(addr,size) ((void)(addr),0) #define get_fs() (KERNEL_DS) static inline void set_fs(mm_segment_t fs) diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h index ae05e56dd17d..5000397134b4 100644 --- a/arch/arm/include/asm/xen/interface.h +++ b/arch/arm/include/asm/xen/interface.h @@ -29,16 +29,22 @@ #ifndef __ASSEMBLY__ /* Explicitly size integers that represent pfns in the interface with - * Xen so that we can have one ABI that works for 32 and 64 bit guests. */ + * Xen so that we can have one ABI that works for 32 and 64 bit guests. + * Note that this means that the xen_pfn_t type may be capable of + * representing pfn's which the guest cannot represent in its own pfn + * type. However since pfn space is controlled by the guest this is + * fine since it simply wouldn't be able to create any sure pfns in + * the first place. + */ typedef uint64_t xen_pfn_t; +#define PRI_xen_pfn "llx" typedef uint64_t xen_ulong_t; +#define PRI_xen_ulong "llx" /* Guest handles for primitive C types. */ __DEFINE_GUEST_HANDLE(uchar, unsigned char); __DEFINE_GUEST_HANDLE(uint, unsigned int); -__DEFINE_GUEST_HANDLE(ulong, unsigned long); DEFINE_GUEST_HANDLE(char); DEFINE_GUEST_HANDLE(int); -DEFINE_GUEST_HANDLE(long); DEFINE_GUEST_HANDLE(void); DEFINE_GUEST_HANDLE(uint64_t); DEFINE_GUEST_HANDLE(uint32_t); diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h index 174202318dff..c6b9096cef95 100644 --- a/arch/arm/include/asm/xen/page.h +++ b/arch/arm/include/asm/xen/page.h @@ -10,7 +10,7 @@ #include <xen/interface/grant_table.h> #define pfn_to_mfn(pfn) (pfn) -#define phys_to_machine_mapping_valid (1) +#define phys_to_machine_mapping_valid(pfn) (1) #define mfn_to_pfn(mfn) (mfn) #define mfn_to_virt(m) (__va(mfn_to_pfn(m) << PAGE_SHIFT)) @@ -30,6 +30,8 @@ typedef struct xpaddr { #define XMADDR(x) ((xmaddr_t) { .maddr = (x) }) #define XPADDR(x) ((xpaddr_t) { .paddr = (x) }) +#define INVALID_P2M_ENTRY (~0UL) + static inline xmaddr_t phys_to_machine(xpaddr_t phys) { unsigned offset = phys.paddr & ~PAGE_MASK; @@ -74,9 +76,14 @@ static inline int m2p_remove_override(struct page *page, bool clear_pte) return 0; } +static inline bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn) +{ + BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY); + return true; +} + static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn) { - BUG(); - return false; + return __set_phys_to_machine(pfn, mfn); } #endif /* _ASM_ARM_XEN_PAGE_H */ diff --git a/arch/arm/include/debug/8250_32.S b/arch/arm/include/debug/8250_32.S new file mode 100644 index 000000000000..8db01eeabbb4 --- /dev/null +++ b/arch/arm/include/debug/8250_32.S @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2011 Picochip Ltd., Jamie Iles + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit + * accesses to the 8250. + */ + +#include <linux/serial_reg.h> + + .macro senduart,rd,rx + str \rd, [\rx, #UART_TX << UART_SHIFT] + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1002b + .endm + + /* The UART's don't have any flow control IO's wired up. */ + .macro waituart,rd,rx + .endm diff --git a/arch/arm/include/debug/picoxcell.S b/arch/arm/include/debug/picoxcell.S index 7419deb1b948..bc1f07c49cd4 100644 --- a/arch/arm/include/debug/picoxcell.S +++ b/arch/arm/include/debug/picoxcell.S @@ -5,10 +5,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit - * accesses to the 8250. */ -#include <linux/serial_reg.h> #define UART_SHIFT 2 #define PICOXCELL_UART1_BASE 0x80230000 @@ -19,17 +16,4 @@ ldr \rp, =PICOXCELL_UART1_BASE .endm - .macro senduart,rd,rx - str \rd, [\rx, #UART_TX << UART_SHIFT] - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] - and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE - teq \rd, #UART_LSR_TEMT | UART_LSR_THRE - bne 1002b - .endm - - /* The UART's don't have any flow control IO's wired up. */ - .macro waituart,rd,rx - .endm +#include "8250_32.S" diff --git a/arch/arm/include/debug/socfpga.S b/arch/arm/include/debug/socfpga.S index d6f26d23374f..966b2f994946 100644 --- a/arch/arm/include/debug/socfpga.S +++ b/arch/arm/include/debug/socfpga.S @@ -7,6 +7,9 @@ * published by the Free Software Foundation. */ +#define UART_SHIFT 2 +#define DEBUG_LL_UART_OFFSET 0x00002000 + .macro addruart, rp, rv, tmp mov \rp, #DEBUG_LL_UART_OFFSET orr \rp, \rp, #0x00c00000 @@ -14,3 +17,5 @@ orr \rp, \rp, #0xff000000 @ physical base .endm +#include "8250_32.S" + diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 16cedb42c0c3..896165096d6a 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -34,6 +34,7 @@ #include <linux/list.h> #include <linux/kallsyms.h> #include <linux/proc_fs.h> +#include <linux/export.h> #include <asm/exception.h> #include <asm/mach/arch.h> @@ -109,6 +110,7 @@ void set_irq_flags(unsigned int irq, unsigned int iflags) /* Order is clear bits in "clr" then set bits in "set" */ irq_modify_status(irq, clr, set & ~clr); } +EXPORT_SYMBOL_GPL(set_irq_flags); void __init init_IRQ(void) { diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index 38c1a3b103a0..839312905067 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -366,7 +366,9 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3") TEST_UNSUPPORTED(".word 0xe0500090 @ undef") TEST_UNSUPPORTED(".word 0xe05fff9f @ undef") +#endif +#if __LINUX_ARM_ARCH__ >= 7 TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") TEST_RRR( "mlshi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") TEST_RR( "mls lr, r",1, VAL2,", r",2, VAL3,", r13") @@ -456,6 +458,8 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(".word 0xe1700090") /* Unallocated space */ #if __LINUX_ARM_ARCH__ >= 6 TEST_UNSUPPORTED("ldrex r2, [sp]") +#endif +#if (__LINUX_ARM_ARCH__ >= 7) || defined(CONFIG_CPU_32v6K) TEST_UNSUPPORTED("strexd r0, r2, r3, [sp]") TEST_UNSUPPORTED("ldrexd r2, r3, [sp]") TEST_UNSUPPORTED("strexb r0, r2, [sp]") diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index e29c3337ca81..8ef8c9337809 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -45,10 +45,9 @@ int machine_kexec_prepare(struct kimage *image) for (i = 0; i < image->nr_segments; i++) { current_segment = &image->segment[i]; - err = memblock_is_region_memory(current_segment->mem, - current_segment->memsz); - if (err) - return - EINVAL; + if (!memblock_is_region_memory(current_segment->mem, + current_segment->memsz)) + return -EINVAL; err = get_user(header, (__be32*)current_segment->buf); if (err) diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 93971b1a4f0b..53c0304b734a 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -96,6 +96,10 @@ armpmu_event_set_period(struct perf_event *event, s64 period = hwc->sample_period; int ret = 0; + /* The period may have been changed by PERF_EVENT_IOC_PERIOD */ + if (unlikely(period != hwc->last_period)) + left = period - (hwc->last_period - left); + if (unlikely(left <= -period)) { left = period; local64_set(&hwc->period_left, left); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 8e20754dd31d..fbc8b2623d82 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -294,18 +294,24 @@ static void percpu_timer_setup(void); asmlinkage void __cpuinit secondary_start_kernel(void) { struct mm_struct *mm = &init_mm; - unsigned int cpu = smp_processor_id(); + unsigned int cpu; + + /* + * The identity mapping is uncached (strongly ordered), so + * switch away from it before attempting any exclusive accesses. + */ + cpu_switch_mm(mm->pgd, mm); + enter_lazy_tlb(mm, current); + local_flush_tlb_all(); /* * All kernel threads share the same mm context; grab a * reference and switch to it. */ + cpu = smp_processor_id(); atomic_inc(&mm->mm_count); current->active_mm = mm; cpumask_set_cpu(cpu, mm_cpumask(mm)); - cpu_switch_mm(mm->pgd, mm); - enter_lazy_tlb(mm, current); - local_flush_tlb_all(); printk("CPU%u: Booted secondary processor\n", cpu); diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index e1f906989bb8..b22d700fea27 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -42,10 +42,10 @@ static void twd_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - /* timer load already set up */ ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_PERIODIC; - __raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD); + __raw_writel(DIV_ROUND_CLOSEST(twd_timer_rate, HZ), + twd_base + TWD_TIMER_LOAD); break; case CLOCK_EVT_MODE_ONESHOT: /* period set, and timer enabled in 'next_event' hook */ diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 9d0a30032d7f..0dc53854a5d8 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -45,6 +45,7 @@ int read_current_timer(unsigned long *timer_val) *timer_val = delay_timer->read_current_timer(); return 0; } +EXPORT_SYMBOL_GPL(read_current_timer); static void __timer_delay(unsigned long cycles) { diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index b14207101938..043624219b55 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -21,19 +21,13 @@ config SOC_AT91SAM9 bool select CPU_ARM926T select GENERIC_CLOCKEVENTS + select MULTI_IRQ_HANDLER + select SPARSE_IRQ menu "Atmel AT91 System-on-Chip" comment "Atmel AT91 Processor" -config SOC_AT91SAM9 - bool - select AT91_SAM9_SMC - select AT91_SAM9_TIME - select CPU_ARM926T - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - config SOC_AT91RM9200 bool "AT91RM9200" select CPU_ARM920T diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index b4f0565aff63..5269825194a8 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -187,7 +187,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200.0", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index a563189cdfc3..1e122bcd7845 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -479,7 +479,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91rm9200_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -512,7 +512,7 @@ static struct resource twi_resources[] = { static struct platform_device at91rm9200_twi_device = { .name = "i2c-at91rm9200", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index ad29f93f20ca..f8202615f4a8 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -211,8 +211,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index a76b8684f52d..aa1e58729885 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -389,7 +389,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9260_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -421,7 +421,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9260_twi_device = { - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 8d999eb1a137..04295c04b3e0 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -178,8 +178,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261.0", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 9752f17efba9..b9487696b7be 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -285,7 +285,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9261_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -317,7 +317,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9261_twi_device = { - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 6a01d0360dfb..d6f9c23927c4 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -193,7 +193,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 8dde220b42b6..cb85da2eccea 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -567,7 +567,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9263_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -600,7 +600,7 @@ static struct resource twi_resources[] = { static struct platform_device at91sam9263_twi_device = { .name = "i2c-at91sam9260", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index d6ca0543ce8d..5047bdc92adf 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -314,7 +314,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9rl_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -347,7 +347,7 @@ static struct resource twi_resources[] = { static struct platform_device at91sam9rl_twi_device = { .name = "i2c-at91sam9g20", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index 6bd7300a2bc5..bb7f54474b92 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -88,6 +88,6 @@ void __init at91x40_init_interrupts(unsigned int priority[NR_AIC_IRQS]) if (!priority) priority = at91x40_default_irq_priority; - at91_aic_init(priority); + at91_aic_init(priority, at91_extern_irq); } diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 9cda3fd346ae..6960778af4c2 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -129,7 +129,7 @@ static struct spi_board_info neocore926_spi_devices[] = { .max_speed_hz = 125000 * 16, .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9263_ID_IRQ1, + .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1, }, #endif }; diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 27b3af1a3047..a9167dd45f96 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -309,7 +309,7 @@ static struct spi_board_info ek_spi_devices[] = { .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9261_ID_IRQ0, + .irq = NR_IRQS_LEGACY + AT91SAM9261_ID_IRQ0, .controller_data = (void *) AT91_PIN_PA28, /* CS pin */ }, #endif diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 073e17403d98..b87dbe2be0d6 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -132,7 +132,7 @@ static struct spi_board_info ek_spi_devices[] = { .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9263_ID_IRQ1, + .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1, }, #endif }; diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index f49650677653..b62f560e6c75 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -26,7 +26,8 @@ extern void __init at91_dt_initialize(void); extern void __init at91_init_irq_default(void); extern void __init at91_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); -extern void __init at91_aic_init(unsigned int priority[]); +extern void __init at91_aic_init(unsigned int priority[], + unsigned int ext_irq_mask); extern int __init at91_aic_of_init(struct device_node *node, struct device_node *parent); extern int __init at91_aic5_of_init(struct device_node *node, diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index 1e02c0e49dcc..febc2ee901a5 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -502,14 +502,19 @@ int __init at91_aic5_of_init(struct device_node *node, /* * Initialize the AIC interrupt controller. */ -void __init at91_aic_init(unsigned int *priority) +void __init at91_aic_init(unsigned int *priority, unsigned int ext_irq_mask) { unsigned int i; int irq_base; - if (at91_aic_pm_init()) + at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs) + * sizeof(*at91_extern_irq), GFP_KERNEL); + + if (at91_aic_pm_init() || at91_extern_irq == NULL) panic("Unable to allocate bit maps\n"); + *at91_extern_irq = ext_irq_mask; + at91_aic_base = ioremap(AT91_AIC, 512); if (!at91_aic_base) panic("Unable to ioremap AIC registers\n"); diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index da9881b161e1..0b32c81730a5 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -47,7 +47,7 @@ void __init at91_init_irq_default(void) void __init at91_init_interrupts(unsigned int *priority) { /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); + at91_aic_init(priority, at91_extern_irq); /* Enable GPIO interrupts */ at91_gpio_irq_setup(); @@ -151,7 +151,7 @@ static void __init soc_detect(u32 dbgu_base) } /* at91sam9g10 */ - if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { + if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { at91_soc_initdata.type = AT91_SOC_SAM9G10; at91_boot_soc = at91sam9261_soc; } diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 32ee3f895967..d4f4dbfc0e59 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -11,39 +11,40 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include <linux/kernel.h> -#include <linux/init.h> #include <linux/console.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/init.h> +#include <linux/kernel.h> #include <linux/i2c.h> #include <linux/i2c/at24.h> #include <linux/i2c/pca953x.h> #include <linux/input.h> +#include <linux/input/tps6507x-ts.h> #include <linux/mfd/tps6507x.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/mtd-davinci-aemif.h> +#include <linux/platform_data/spi-davinci.h> +#include <linux/platform_data/uio_pruss.h> #include <linux/regulator/machine.h> #include <linux/regulator/tps6507x.h> -#include <linux/input/tps6507x-ts.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#include <linux/delay.h> #include <linux/wl12xx.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/system_info.h> - #include <mach/cp_intc.h> #include <mach/da8xx.h> -#include <linux/platform_data/mtd-davinci.h> #include <mach/mux.h> -#include <linux/platform_data/mtd-davinci-aemif.h> -#include <linux/platform_data/spi-davinci.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/system_info.h> #include <media/tvp514x.h> #include <media/adv7343.h> @@ -1516,6 +1517,11 @@ static __init void da850_evm_init(void) pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n", ret); + ret = da8xx_register_uio_pruss(); + if (ret) + pr_warn("da850_evm_init: pruss initialization failed: %d\n", + ret); + /* Handle board specific muxing for LCD here */ ret = davinci_cfg_reg_list(da850_evm_lcdc_pins); if (ret) diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 715b690e5009..1947be8e5f5b 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -47,6 +47,7 @@ #include <plat/fimc-core.h> #include <plat/iic-core.h> #include <plat/tv-core.h> +#include <plat/spi-core.h> #include <plat/regs-serial.h> #include "common.h" @@ -346,6 +347,8 @@ static void __init exynos4_map_io(void) s5p_fb_setname(0, "exynos4-fb"); s5p_hdmi_setname("exynos4-hdmi"); + + s3c64xx_spi_setname("exynos4210-spi"); } static void __init exynos5_map_io(void) @@ -366,6 +369,8 @@ static void __init exynos5_map_io(void) s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); s3c_i2c2_setname("s3c2440-i2c"); + + s3c64xx_spi_setname("exynos4210-spi"); } static void __init exynos4_init_clocks(int xtal) diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index e58d786faf78..eadf4b59e7d2 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -99,6 +99,7 @@ static char const *exynos4_dt_compat[] __initdata = { DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ + .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = exynos4_dt_map_io, .handle_irq = gic_handle_irq, diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c index 1a7a8dd045a1..1ab91b5209e6 100644 --- a/arch/arm/mach-imx/clk-busy.c +++ b/arch/arm/mach-imx/clk-busy.c @@ -108,7 +108,7 @@ struct clk *imx_clk_busy_divider(const char *name, const char *parent_name, busy->div.hw.init = &init; clk = clk_register(NULL, &busy->div.hw); - if (!clk) + if (IS_ERR(clk)) kfree(busy); return clk; diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index d20d4795f4ea..01e2f843bf2e 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -127,8 +127,8 @@ int __init mx25_clocks_init(void) clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0), 4); clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5); clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6); - clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per8", ccm(CCM_CGCR0), 7); - clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "ipg_per", ccm(CCM_CGCR0), 8); + clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0), 7); + clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0), 8); clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13); clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14); clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15); diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 3b6b640eed24..366e5d59d886 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -109,7 +109,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[per3_div] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6); clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6); clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks)); - clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 3); + clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6); clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 28, 3); clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks)); clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks)); @@ -121,7 +121,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[ssi1_sel] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks)); clk[ssi2_sel] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks)); clk[ssi1_div] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6); - clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 3); + clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6); clk[clko_en] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0); clk[ssi2_ipg_gate] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0); clk[ssi1_ipg_gate] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1); diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 9d2c843bde02..b5deb0554552 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -108,9 +108,8 @@ void __init imx3_init_l2x0(void) } l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096); - if (IS_ERR(l2x0_base)) { - printk(KERN_ERR "remapping L2 cache area failed with %ld\n", - PTR_ERR(l2x0_base)); + if (!l2x0_base) { + printk(KERN_ERR "remapping L2 cache area failed\n"); return; } diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 4b6de70c47a6..756872e9c337 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -307,8 +307,7 @@ static void __init omap_fsample_init(void) fsample_init_smc91x(); - if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 376f7f29ef77..9d533ee7aee0 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -411,8 +411,7 @@ static void __init h2_init(void) h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS; h2_nand_resource.end += SZ_4K - 1; - if (gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(H2_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index ededdb7ef28c..be60862945a3 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -406,8 +406,7 @@ static void __init h3_init(void) nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS; nand_resource.end += SZ_4K - 1; - if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(H3_NAND_RB_GPIO_PIN); /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 198b05417bfc..327ffcf6e9a4 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -275,8 +275,7 @@ static void __init omap_perseus2_init(void) perseus2_init_smc91x(); - if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(P2_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 2a1a898c7f90..2265e5826883 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -11,7 +11,6 @@ config ARCH_OMAP2PLUS_TYPICAL select I2C_OMAP select MENELAUS if ARCH_OMAP2 select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 - select PINCTRL select PM_RUNTIME select REGULATOR select SERIAL_OMAP @@ -271,14 +270,14 @@ config MACH_NOKIA_N8X0 select OMAP_PACKAGE_ZAC config MACH_NOKIA_RM680 - bool "Nokia RM-680/696 board" + bool "Nokia N950 (RM-680) / N9 (RM-696) phones" depends on ARCH_OMAP3 default y select MACH_NOKIA_RM696 select OMAP_PACKAGE_CBB config MACH_NOKIA_RX51 - bool "Nokia RX-51 board" + bool "Nokia N900 (RX-51) phone" depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index fe40d9e488c9..fb38a9b24b0c 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -279,4 +279,4 @@ endif emac-$(CONFIG_TI_DAVINCI_EMAC) := am35xx-emac.o obj-y += $(emac-m) $(emac-y) -obj-y += common-board-devices.o twl-common.o +obj-y += common-board-devices.o twl-common.o dss-common.o diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 3669c120c7e8..8ce98ae765ab 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -37,9 +37,6 @@ #include <plat/usb.h> #include <plat/mmc.h> #include "omap4-keypad.h" -#include <video/omapdss.h> -#include <video/omap-panel-nokia-dsi.h> -#include <video/omap-panel-picodlp.h> #include <linux/wl12xx.h> #include <linux/platform_data/omap-abe-twl6040.h> @@ -48,17 +45,13 @@ #include "hsmmc.h" #include "control.h" #include "common-board-devices.h" +#include "dss-common.h" #define ETH_KS8851_IRQ 34 #define ETH_KS8851_POWER_ON 48 #define ETH_KS8851_QUART 138 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 #define OMAP4_SFH7741_ENABLE_GPIO 188 -#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ -#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ -#define HDMI_GPIO_HPD 63 /* Hotplug detect */ -#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ -#define DLP_POWER_ON_GPIO 40 #define GPIO_WIFI_PMENA 54 #define GPIO_WIFI_IRQ 53 @@ -607,154 +600,6 @@ static void __init omap_sfh7741prox_init(void) __func__, OMAP4_SFH7741_ENABLE_GPIO, error); } -static struct nokia_dsi_panel_data dsi1_panel = { - .name = "taal", - .reset_gpio = 102, - .use_ext_te = false, - .ext_te_gpio = 101, - .esd_interval = 0, - .pin_config = { - .num_pins = 6, - .pins = { 0, 1, 2, 3, 4, 5 }, - }, -}; - -static struct omap_dss_device sdp4430_lcd_device = { - .name = "lcd", - .driver_name = "taal", - .type = OMAP_DISPLAY_TYPE_DSI, - .data = &dsi1_panel, - .phy.dsi = { - .module = 0, - }, - .channel = OMAP_DSS_CHANNEL_LCD, -}; - -static struct nokia_dsi_panel_data dsi2_panel = { - .name = "taal", - .reset_gpio = 104, - .use_ext_te = false, - .ext_te_gpio = 103, - .esd_interval = 0, - .pin_config = { - .num_pins = 6, - .pins = { 0, 1, 2, 3, 4, 5 }, - }, -}; - -static struct omap_dss_device sdp4430_lcd2_device = { - .name = "lcd2", - .driver_name = "taal", - .type = OMAP_DISPLAY_TYPE_DSI, - .data = &dsi2_panel, - .phy.dsi = { - - .module = 1, - }, - .channel = OMAP_DSS_CHANNEL_LCD2, -}; - -static struct omap_dss_hdmi_data sdp4430_hdmi_data = { - .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, - .ls_oe_gpio = HDMI_GPIO_LS_OE, - .hpd_gpio = HDMI_GPIO_HPD, -}; - -static struct omap_dss_device sdp4430_hdmi_device = { - .name = "hdmi", - .driver_name = "hdmi_panel", - .type = OMAP_DISPLAY_TYPE_HDMI, - .channel = OMAP_DSS_CHANNEL_DIGIT, - .data = &sdp4430_hdmi_data, -}; - -static struct picodlp_panel_data sdp4430_picodlp_pdata = { - .picodlp_adapter_id = 2, - .emu_done_gpio = 44, - .pwrgood_gpio = 45, -}; - -static void sdp4430_picodlp_init(void) -{ - int r; - const struct gpio picodlp_gpios[] = { - {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, - "DLP POWER ON"}, - {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN, - "DLP EMU DONE"}, - {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW, - "DLP PWRGOOD"}, - }; - - r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios)); - if (r) - pr_err("Cannot request PicoDLP GPIOs, error %d\n", r); -} - -static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev) -{ - gpio_set_value(DISPLAY_SEL_GPIO, 0); - gpio_set_value(DLP_POWER_ON_GPIO, 1); - - return 0; -} - -static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev) -{ - gpio_set_value(DLP_POWER_ON_GPIO, 0); - gpio_set_value(DISPLAY_SEL_GPIO, 1); -} - -static struct omap_dss_device sdp4430_picodlp_device = { - .name = "picodlp", - .driver_name = "picodlp_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 24, - .channel = OMAP_DSS_CHANNEL_LCD2, - .platform_enable = sdp4430_panel_enable_picodlp, - .platform_disable = sdp4430_panel_disable_picodlp, - .data = &sdp4430_picodlp_pdata, -}; - -static struct omap_dss_device *sdp4430_dss_devices[] = { - &sdp4430_lcd_device, - &sdp4430_lcd2_device, - &sdp4430_hdmi_device, - &sdp4430_picodlp_device, -}; - -static struct omap_dss_board_info sdp4430_dss_data = { - .num_devices = ARRAY_SIZE(sdp4430_dss_devices), - .devices = sdp4430_dss_devices, - .default_device = &sdp4430_lcd_device, -}; - -static void __init omap_4430sdp_display_init(void) -{ - int r; - - /* Enable LCD2 by default (instead of Pico DLP) */ - r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, - "display_sel"); - if (r) - pr_err("%s: Could not get display_sel GPIO\n", __func__); - - sdp4430_picodlp_init(); - omap_display_init(&sdp4430_dss_data); - /* - * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and - * later have external pull up on the HDMI I2C lines - */ - if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) - omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); - else - omap_hdmi_init(0); - - omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); -} - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 601ecdfb1cf9..8f5f21c94e7c 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -21,6 +21,7 @@ #include "common.h" #include "common-board-devices.h" +#include "dss-common.h" #if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)) #define intc_of_init NULL @@ -40,6 +41,15 @@ static void __init omap_generic_init(void) omap_sdrc_init(NULL, NULL); of_platform_populate(NULL, omap_dt_match_table, NULL, NULL); + + /* + * HACK: call display setup code for selected boards to enable omapdss. + * This will be removed when omapdss supports DT. + */ + if (of_machine_is_compatible("ti,omap4-panda")) + omap4_panda_display_init_of(); + else if (of_machine_is_compatible("ti,omap4-sdp")) + omap_4430sdp_display_init_of(); } #ifdef CONFIG_SOC_OMAP2420 diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 388c431c745a..d41ab98890ff 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -24,6 +24,7 @@ #include <linux/input.h> #include <linux/gpio_keys.h> #include <linux/opp.h> +#include <linux/cpu.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -444,27 +445,31 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static void __init beagle_opp_init(void) +static int __init beagle_opp_init(void) { int r = 0; - /* Initialize the omap3 opp table */ - if (omap3_opp_init()) { + if (!machine_is_omap3_beagle()) + return 0; + + /* Initialize the omap3 opp table if not already created. */ + r = omap3_opp_init(); + if (IS_ERR_VALUE(r) && (r != -EEXIST)) { pr_err("%s: opp default init failed\n", __func__); - return; + return r; } /* Custom OPP enabled for all xM versions */ if (cpu_is_omap3630()) { struct device *mpu_dev, *iva_dev; - mpu_dev = omap_device_get_by_hwmod_name("mpu"); + mpu_dev = get_cpu_device(0); iva_dev = omap_device_get_by_hwmod_name("iva"); if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) { pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", __func__, mpu_dev, iva_dev); - return; + return -ENODEV; } /* Enable MPU 1GHz and lower opps */ r = opp_enable(mpu_dev, 800000000); @@ -484,8 +489,9 @@ static void __init beagle_opp_init(void) opp_disable(iva_dev, 660000000); } } - return; + return 0; } +device_initcall(beagle_opp_init); static void __init omap3_beagle_init(void) { @@ -522,8 +528,6 @@ static void __init omap3_beagle_init(void) /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - - beagle_opp_init(); } MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index bfcd397e233c..ab505a21f703 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -36,26 +36,22 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <video/omapdss.h> #include "common.h" #include <plat/usb.h> #include <plat/mmc.h> -#include <video/omap-panel-tfp410.h> #include "soc.h" #include "hsmmc.h" #include "control.h" #include "mux.h" #include "common-board-devices.h" +#include "dss-common.h" #define GPIO_HUB_POWER 1 #define GPIO_HUB_NRESET 62 #define GPIO_WIFI_PMENA 43 #define GPIO_WIFI_IRQ 53 -#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ -#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ -#define HDMI_GPIO_HPD 63 /* Hotplug detect */ /* wl127x BT, FM, GPS connectivity chip */ static struct ti_st_plat_data wilink_platform_data = { @@ -409,68 +405,6 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif -/* Display DVI */ -#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0 - -/* Using generic display panel */ -static struct tfp410_platform_data omap4_dvi_panel = { - .i2c_bus_num = 3, - .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, -}; - -static struct omap_dss_device omap4_panda_dvi_device = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "dvi", - .driver_name = "tfp410", - .data = &omap4_dvi_panel, - .phy.dpi.data_lines = 24, - .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, - .channel = OMAP_DSS_CHANNEL_LCD2, -}; - -static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { - .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, - .ls_oe_gpio = HDMI_GPIO_LS_OE, - .hpd_gpio = HDMI_GPIO_HPD, -}; - -static struct omap_dss_device omap4_panda_hdmi_device = { - .name = "hdmi", - .driver_name = "hdmi_panel", - .type = OMAP_DISPLAY_TYPE_HDMI, - .channel = OMAP_DSS_CHANNEL_DIGIT, - .data = &omap4_panda_hdmi_data, -}; - -static struct omap_dss_device *omap4_panda_dss_devices[] = { - &omap4_panda_dvi_device, - &omap4_panda_hdmi_device, -}; - -static struct omap_dss_board_info omap4_panda_dss_data = { - .num_devices = ARRAY_SIZE(omap4_panda_dss_devices), - .devices = omap4_panda_dss_devices, - .default_device = &omap4_panda_dvi_device, -}; - -static void __init omap4_panda_display_init(void) -{ - - omap_display_init(&omap4_panda_dss_data); - - /* - * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and - * later have external pull up on the HDMI I2C lines - */ - if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) - omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); - else - omap_hdmi_init(0); - - omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); -} static void omap4_panda_init_rev(void) { diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 45997bfbcbd2..42ac9d3f2a59 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -1,5 +1,5 @@ /* - * Board support file for Nokia RM-680/696. + * Board support file for Nokia N950 (RM-680) / N9 (RM-696). * * Copyright (C) 2010 Nokia * diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 7bbb05d9689b..e5af1197a4b5 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap2/board-rx51.c + * Board support file for Nokia N900 (aka RX-51). * * Copyright (C) 2007, 2008 Nokia * diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index 114ab4b8e0e3..1a45d6bd2539 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -1073,6 +1073,8 @@ static struct omap_clk am33xx_clks[] = { CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck, CK_AM33XX), CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck, CK_AM33XX), CLK(NULL, "clkout2_ck", &clkout2_ck, CK_AM33XX), + CLK(NULL, "timer_32k_ck", &clkdiv32k_ick, CK_AM33XX), + CLK(NULL, "timer_sys_ck", &sys_clkin_ck, CK_AM33XX), }; int __init am33xx_clk_init(void) diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c new file mode 100644 index 000000000000..679a0478644f --- /dev/null +++ b/arch/arm/mach-omap2/dss-common.c @@ -0,0 +1,276 @@ +/* + * Copyright (C) 2012 Texas Instruments, Inc.. + * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +/* + * NOTE: this is a transitional file to help with DT adaptation. + * This file will be removed when DSS supports DT. + */ + +#include <linux/kernel.h> +#include <linux/gpio.h> + +#include <video/omapdss.h> +#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-nokia-dsi.h> +#include <video/omap-panel-picodlp.h> + +#include <plat/cpu.h> + +#include "dss-common.h" +#include "mux.h" + +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ +#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ + +/* Display DVI */ +#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0 + +/* Using generic display panel */ +static struct tfp410_platform_data omap4_dvi_panel = { + .i2c_bus_num = 3, + .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, +}; + +static struct omap_dss_device omap4_panda_dvi_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "dvi", + .driver_name = "tfp410", + .data = &omap4_dvi_panel, + .phy.dpi.data_lines = 24, + .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, + .channel = OMAP_DSS_CHANNEL_LCD2, +}; + +static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { + .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, + .ls_oe_gpio = HDMI_GPIO_LS_OE, + .hpd_gpio = HDMI_GPIO_HPD, +}; + +static struct omap_dss_device omap4_panda_hdmi_device = { + .name = "hdmi", + .driver_name = "hdmi_panel", + .type = OMAP_DISPLAY_TYPE_HDMI, + .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &omap4_panda_hdmi_data, +}; + +static struct omap_dss_device *omap4_panda_dss_devices[] = { + &omap4_panda_dvi_device, + &omap4_panda_hdmi_device, +}; + +static struct omap_dss_board_info omap4_panda_dss_data = { + .num_devices = ARRAY_SIZE(omap4_panda_dss_devices), + .devices = omap4_panda_dss_devices, + .default_device = &omap4_panda_dvi_device, +}; + +void __init omap4_panda_display_init(void) +{ + omap_display_init(&omap4_panda_dss_data); + + /* + * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and + * later have external pull up on the HDMI I2C lines + */ + if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) + omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); + else + omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); +} + +void __init omap4_panda_display_init_of(void) +{ + omap_display_init(&omap4_panda_dss_data); +} + + +/* OMAP4 Blaze display data */ + +#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ +#define DLP_POWER_ON_GPIO 40 + +static struct nokia_dsi_panel_data dsi1_panel = { + .name = "taal", + .reset_gpio = 102, + .use_ext_te = false, + .ext_te_gpio = 101, + .esd_interval = 0, + .pin_config = { + .num_pins = 6, + .pins = { 0, 1, 2, 3, 4, 5 }, + }, +}; + +static struct omap_dss_device sdp4430_lcd_device = { + .name = "lcd", + .driver_name = "taal", + .type = OMAP_DISPLAY_TYPE_DSI, + .data = &dsi1_panel, + .phy.dsi = { + .module = 0, + }, + .channel = OMAP_DSS_CHANNEL_LCD, +}; + +static struct nokia_dsi_panel_data dsi2_panel = { + .name = "taal", + .reset_gpio = 104, + .use_ext_te = false, + .ext_te_gpio = 103, + .esd_interval = 0, + .pin_config = { + .num_pins = 6, + .pins = { 0, 1, 2, 3, 4, 5 }, + }, +}; + +static struct omap_dss_device sdp4430_lcd2_device = { + .name = "lcd2", + .driver_name = "taal", + .type = OMAP_DISPLAY_TYPE_DSI, + .data = &dsi2_panel, + .phy.dsi = { + + .module = 1, + }, + .channel = OMAP_DSS_CHANNEL_LCD2, +}; + +static struct omap_dss_hdmi_data sdp4430_hdmi_data = { + .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, + .ls_oe_gpio = HDMI_GPIO_LS_OE, + .hpd_gpio = HDMI_GPIO_HPD, +}; + +static struct omap_dss_device sdp4430_hdmi_device = { + .name = "hdmi", + .driver_name = "hdmi_panel", + .type = OMAP_DISPLAY_TYPE_HDMI, + .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &sdp4430_hdmi_data, +}; + +static struct picodlp_panel_data sdp4430_picodlp_pdata = { + .picodlp_adapter_id = 2, + .emu_done_gpio = 44, + .pwrgood_gpio = 45, +}; + +static void sdp4430_picodlp_init(void) +{ + int r; + const struct gpio picodlp_gpios[] = { + {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, + "DLP POWER ON"}, + {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN, + "DLP EMU DONE"}, + {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW, + "DLP PWRGOOD"}, + }; + + r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios)); + if (r) + pr_err("Cannot request PicoDLP GPIOs, error %d\n", r); +} + +static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev) +{ + gpio_set_value(DISPLAY_SEL_GPIO, 0); + gpio_set_value(DLP_POWER_ON_GPIO, 1); + + return 0; +} + +static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev) +{ + gpio_set_value(DLP_POWER_ON_GPIO, 0); + gpio_set_value(DISPLAY_SEL_GPIO, 1); +} + +static struct omap_dss_device sdp4430_picodlp_device = { + .name = "picodlp", + .driver_name = "picodlp_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 24, + .channel = OMAP_DSS_CHANNEL_LCD2, + .platform_enable = sdp4430_panel_enable_picodlp, + .platform_disable = sdp4430_panel_disable_picodlp, + .data = &sdp4430_picodlp_pdata, +}; + +static struct omap_dss_device *sdp4430_dss_devices[] = { + &sdp4430_lcd_device, + &sdp4430_lcd2_device, + &sdp4430_hdmi_device, + &sdp4430_picodlp_device, +}; + +static struct omap_dss_board_info sdp4430_dss_data = { + .num_devices = ARRAY_SIZE(sdp4430_dss_devices), + .devices = sdp4430_dss_devices, + .default_device = &sdp4430_lcd_device, +}; + +void __init omap_4430sdp_display_init(void) +{ + int r; + + /* Enable LCD2 by default (instead of Pico DLP) */ + r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, + "display_sel"); + if (r) + pr_err("%s: Could not get display_sel GPIO\n", __func__); + + sdp4430_picodlp_init(); + omap_display_init(&sdp4430_dss_data); + /* + * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and + * later have external pull up on the HDMI I2C lines + */ + if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) + omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); + else + omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); +} + +void __init omap_4430sdp_display_init_of(void) +{ + int r; + + /* Enable LCD2 by default (instead of Pico DLP) */ + r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, + "display_sel"); + if (r) + pr_err("%s: Could not get display_sel GPIO\n", __func__); + + sdp4430_picodlp_init(); + omap_display_init(&sdp4430_dss_data); +} diff --git a/arch/arm/mach-omap2/dss-common.h b/arch/arm/mach-omap2/dss-common.h new file mode 100644 index 000000000000..915f6fff5106 --- /dev/null +++ b/arch/arm/mach-omap2/dss-common.h @@ -0,0 +1,14 @@ +#ifndef __OMAP_DSS_COMMON__ +#define __OMAP_DSS_COMMON__ + +/* + * NOTE: this is a transitional file to help with DT adaptation. + * This file will be removed when DSS supports DT. + */ + +void __init omap4_panda_display_init(void); +void __init omap4_panda_display_init_of(void); +void __init omap_4430sdp_display_init(void); +void __init omap_4430sdp_display_init_of(void); + +#endif diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index 17f80e4ab162..c47140bbbec4 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -614,16 +614,16 @@ static struct omap_mux __initdata omap3_muxmodes[] = { "sys_off_mode", NULL, NULL, NULL, "gpio_9", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_CTS, 150, - "uart1_cts", NULL, NULL, NULL, + "uart1_cts", "ssi1_rdy_tx", NULL, NULL, "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_RTS, 149, - "uart1_rts", NULL, NULL, NULL, + "uart1_rts", "ssi1_flag_tx", NULL, NULL, "gpio_149", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_RX, 151, - "uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk", + "uart1_rx", "ss1_wake_tx", "mcbsp1_clkr", "mcspi4_clk", "gpio_151", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_TX, 148, - "uart1_tx", NULL, NULL, NULL, + "uart1_tx", "ssi1_dat_tx", NULL, NULL, "gpio_148", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART2_CTS, 144, "uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL, diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 686137d164da..67d66131cfa7 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -91,6 +91,7 @@ extern void omap3_save_scratchpad_contents(void); #define PM_RTA_ERRATUM_i608 (1 << 0) #define PM_SDRC_WAKEUP_ERRATUM_i583 (1 << 1) +#define PM_PER_MEMORIES_ERRATUM_i582 (1 << 2) #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) extern u16 pm34xx_errata; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index ba670db1fd37..3a904de4313e 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -652,14 +652,17 @@ static void __init pm_errata_configure(void) /* Enable the l2 cache toggling in sleep logic */ enable_omap3630_toggle_l2_on_restore(); if (omap_rev() < OMAP3630_REV_ES1_2) - pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583; + pm34xx_errata |= (PM_SDRC_WAKEUP_ERRATUM_i583 | + PM_PER_MEMORIES_ERRATUM_i582); + } else if (cpu_is_omap34xx()) { + pm34xx_errata |= PM_PER_MEMORIES_ERRATUM_i582; } } int __init omap3_pm_init(void) { struct power_state *pwrst, *tmp; - struct clockdomain *neon_clkdm, *mpu_clkdm; + struct clockdomain *neon_clkdm, *mpu_clkdm, *per_clkdm, *wkup_clkdm; int ret; if (!omap3_has_io_chain_ctrl()) @@ -711,6 +714,8 @@ int __init omap3_pm_init(void) neon_clkdm = clkdm_lookup("neon_clkdm"); mpu_clkdm = clkdm_lookup("mpu_clkdm"); + per_clkdm = clkdm_lookup("per_clkdm"); + wkup_clkdm = clkdm_lookup("wkup_clkdm"); #ifdef CONFIG_SUSPEND omap_pm_suspend = omap3_pm_suspend; @@ -727,6 +732,27 @@ int __init omap3_pm_init(void) if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608)) omap3630_ctrl_disable_rta(); + /* + * The UART3/4 FIFO and the sidetone memory in McBSP2/3 are + * not correctly reset when the PER powerdomain comes back + * from OFF or OSWR when the CORE powerdomain is kept active. + * See OMAP36xx Erratum i582 "PER Domain reset issue after + * Domain-OFF/OSWR Wakeup". This wakeup dependency is not a + * complete workaround. The kernel must also prevent the PER + * powerdomain from going to OSWR/OFF while the CORE + * powerdomain is not going to OSWR/OFF. And if PER last + * power state was off while CORE last power state was ON, the + * UART3/4 and McBSP2/3 SIDETONE devices need to run a + * self-test using their loopback tests; if that fails, those + * devices are unusable until the PER/CORE can complete a transition + * from ON to OSWR/OFF and then back to ON. + * + * XXX Technically this workaround is only needed if off-mode + * or OSWR is enabled. + */ + if (IS_PM34XX_ERRATUM(PM_PER_MEMORIES_ERRATUM_i582)) + clkdm_add_wkdep(per_clkdm, wkup_clkdm); + clkdm_add_wkdep(neon_clkdm, mpu_clkdm); if (omap_type() != OMAP2_DEVICE_TYPE_GP) { omap3_secure_ram_storage = diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 0405c8190803..a507cd6cf4f1 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -329,6 +329,11 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt); + if (console_uart_id == bdata->id) { + omap_device_enable(pdev); + pm_runtime_set_active(&pdev->dev); + } + oh->dev_attr = uart; if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads) diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index ed5a95ece9eb..77ee0b732237 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -61,6 +61,7 @@ #include <plat/nand-core.h> #include <plat/adc-core.h> #include <plat/rtc-core.h> +#include <plat/spi-core.h> static struct map_desc s3c2416_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -132,6 +133,7 @@ void __init s3c2416_map_io(void) /* initialize device information early */ s3c2416_default_sdhci0(); s3c2416_default_sdhci1(); + s3c64xx_spi_setname("s3c2443-spi"); iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc)); } diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index ab648ad8fa50..165b6a6b3daa 100644 --- a/arch/arm/mach-s3c24xx/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c @@ -43,6 +43,7 @@ #include <plat/nand-core.h> #include <plat/adc-core.h> #include <plat/rtc-core.h> +#include <plat/spi-core.h> static struct map_desc s3c2443_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -100,6 +101,9 @@ void __init s3c2443_map_io(void) s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull; s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull; + /* initialize device information early */ + s3c64xx_spi_setname("s3c2443-spi"); + iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); } diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index 6e6a0a9d6778..111e404a81fd 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -44,6 +44,7 @@ #include <plat/sdhci.h> #include <plat/adc-core.h> #include <plat/fb-core.h> +#include <plat/spi-core.h> #include <plat/gpio-cfg.h> #include <plat/regs-irqtype.h> #include <plat/regs-serial.h> @@ -179,6 +180,7 @@ void __init s5p6440_map_io(void) /* initialize any device information early */ s3c_adc_setname("s3c64xx-adc"); s3c_fb_setname("s5p64x0-fb"); + s3c64xx_spi_setname("s5p64x0-spi"); s5p64x0_default_sdhci0(); s5p64x0_default_sdhci1(); @@ -193,6 +195,7 @@ void __init s5p6450_map_io(void) /* initialize any device information early */ s3c_adc_setname("s3c64xx-adc"); s3c_fb_setname("s5p64x0-fb"); + s3c64xx_spi_setname("s5p64x0-spi"); s5p64x0_default_sdhci0(); s5p64x0_default_sdhci1(); diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c index 621908658861..cc6e561c9958 100644 --- a/arch/arm/mach-s5pc100/common.c +++ b/arch/arm/mach-s5pc100/common.c @@ -45,6 +45,7 @@ #include <plat/fb-core.h> #include <plat/iic-core.h> #include <plat/onenand-core.h> +#include <plat/spi-core.h> #include <plat/regs-serial.h> #include <plat/watchdog-reset.h> @@ -165,6 +166,8 @@ void __init s5pc100_map_io(void) s3c_onenand_setname("s5pc100-onenand"); s3c_fb_setname("s5pc100-fb"); s3c_cfcon_setname("s5pc100-pata"); + + s3c64xx_spi_setname("s5pc100-spi"); } void __init s5pc100_init_clocks(int xtal) diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c index 4c9e9027df9a..a0c50efe8145 100644 --- a/arch/arm/mach-s5pv210/common.c +++ b/arch/arm/mach-s5pv210/common.c @@ -43,6 +43,7 @@ #include <plat/iic-core.h> #include <plat/keypad-core.h> #include <plat/tv-core.h> +#include <plat/spi-core.h> #include <plat/regs-serial.h> #include "common.h" @@ -196,6 +197,8 @@ void __init s5pv210_map_io(void) /* setup TV devices */ s5p_hdmi_setname("s5pv210-hdmi"); + + s3c64xx_spi_setname("s5pv210-spi"); } void __init s5pv210_init_clocks(int xtal) diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 8ae100cc655c..f58c3ea97732 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -50,17 +50,6 @@ config ARCH_EMEV2 comment "SH-Mobile Board Type" -config MACH_G3EVM - bool "G3EVM board" - depends on ARCH_SH7367 - select ARCH_REQUIRE_GPIOLIB - -config MACH_G4EVM - bool "G4EVM board" - depends on ARCH_SH7377 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - config MACH_AP4EVB bool "AP4EVB board" depends on ARCH_SH7372 @@ -95,6 +84,7 @@ config MACH_MACKEREL select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR select SND_SOC_AK4642 if SND_SIMPLE_CARD + select USE_OF config MACH_KOTA2 bool "KOTA2 board" @@ -146,8 +136,7 @@ menu "Memory configuration" config MEMORY_START hex "Physical memory start address" - default "0x50000000" if MACH_G3EVM - default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \ + default "0x40000000" if MACH_AP4EVB || MACH_AG5EVM || \ MACH_MACKEREL || MACH_BONITO || \ MACH_ARMADILLO800EVA default "0x41000000" if MACH_KOTA2 @@ -159,8 +148,6 @@ config MEMORY_START config MEMORY_SIZE hex "Physical memory size" - default "0x08000000" if MACH_G3EVM - default "0x08000000" if MACH_G4EVM default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \ MACH_ARMADILLO800EVA default "0x1e000000" if MACH_KOTA2 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index fe2c97c179d1..bd2633bb175a 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -45,8 +45,6 @@ obj-$(CONFIG_ARCH_R8A7740) += pm-r8a7740.o obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o # Board objects -obj-$(CONFIG_MACH_G3EVM) += board-g3evm.o -obj-$(CONFIG_MACH_G4EVM) += board-g4evm.o obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 3cc8b1c21da9..499e6e376666 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -1229,6 +1229,13 @@ static void __init eva_add_early_devices(void) shmobile_timer.init = eva_earlytimer_init; } +#define RESCNT2 IOMEM(0xe6188020) +static void eva_restart(char mode, const char *cmd) +{ + /* Do soft power on reset */ + writel((1 << 31), RESCNT2); +} + static const char *eva_boards_compat_dt[] __initdata = { "renesas,armadillo800eva", NULL, @@ -1243,4 +1250,5 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva") .init_late = shmobile_init_late, .timer = &shmobile_timer, .dt_compat = eva_boards_compat_dt, + .restart = eva_restart, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c deleted file mode 100644 index b179d4c213bb..000000000000 --- a/arch/arm/mach-shmobile/board-g3evm.c +++ /dev/null @@ -1,343 +0,0 @@ -/* - * G3EVM board support - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2008 Yoshihiro Shimoda - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/sh_flctl.h> -#include <linux/usb/r8a66597.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/input/sh_keysc.h> -#include <linux/dma-mapping.h> -#include <mach/irqs.h> -#include <mach/sh7367.h> -#include <mach/common.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -/* - * IrDA - * - * S67: 5bit : ON power - * : 6bit : ON remote control - * OFF IrDA - */ - -static struct mtd_partition nor_flash_partitions[] = { - { - .name = "loader", - .offset = 0x00000000, - .size = 512 * 1024, - }, - { - .name = "bootenv", - .offset = MTDPART_OFS_APPEND, - .size = 512 * 1024, - }, - { - .name = "kernel_ro", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - }, - { - .name = "data", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data nor_flash_data = { - .width = 2, - .parts = nor_flash_partitions, - .nr_parts = ARRAY_SIZE(nor_flash_partitions), -}; - -static struct resource nor_flash_resources[] = { - [0] = { - .start = 0x00000000, - .end = 0x08000000 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device nor_flash_device = { - .name = "physmap-flash", - .dev = { - .platform_data = &nor_flash_data, - }, - .num_resources = ARRAY_SIZE(nor_flash_resources), - .resource = nor_flash_resources, -}; - -/* USBHS */ -static void usb_host_port_power(int port, int power) -{ - if (!power) /* only power-on supported for now */ - return; - - /* set VBOUT/PWEN and EXTLP0 in DVSTCTR */ - __raw_writew(__raw_readw(IOMEM(0xe6890008)) | 0x600, IOMEM(0xe6890008)); -} - -static struct r8a66597_platdata usb_host_data = { - .on_chip = 1, - .port_power = usb_host_port_power, -}; - -static struct resource usb_host_resources[] = { - [0] = { - .name = "USBHS", - .start = 0xe6890000, - .end = 0xe68900e5, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xa20), /* USBHS_USHI0 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb_host_device = { - .name = "r8a66597_hcd", - .id = 0, - .dev = { - .platform_data = &usb_host_data, - .dma_mask = NULL, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(usb_host_resources), - .resource = usb_host_resources, -}; - -/* KEYSC */ -static struct sh_keysc_info keysc_info = { - .mode = SH_KEYSC_MODE_5, - .scan_timing = 3, - .delay = 100, - .keycodes = { - KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G, - KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, KEY_M, KEY_N, - KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U, - KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, - KEY_WAKEUP, KEY_COFFEE, KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, - KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER, - }, -}; - -static struct resource keysc_resources[] = { - [0] = { - .name = "KEYSC", - .start = 0xe61b0000, - .end = 0xe61b000f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xbe0), /* KEYSC_KEY */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device keysc_device = { - .name = "sh_keysc", - .num_resources = ARRAY_SIZE(keysc_resources), - .resource = keysc_resources, - .dev = { - .platform_data = &keysc_info, - }, -}; - -static struct mtd_partition nand_partition_info[] = { - { - .name = "system", - .offset = 0, - .size = 64 * 1024 * 1024, - }, - { - .name = "userdata", - .offset = MTDPART_OFS_APPEND, - .size = 128 * 1024 * 1024, - }, - { - .name = "cache", - .offset = MTDPART_OFS_APPEND, - .size = 64 * 1024 * 1024, - }, -}; - -static struct resource nand_flash_resources[] = { - [0] = { - .start = 0xe6a30000, - .end = 0xe6a3009b, - .flags = IORESOURCE_MEM, - } -}; - -static struct sh_flctl_platform_data nand_flash_data = { - .parts = nand_partition_info, - .nr_parts = ARRAY_SIZE(nand_partition_info), - .flcmncr_val = QTSEL_E | FCKSEL_E | TYPESEL_SET | NANWF_E - | SHBUSSEL | SEL_16BIT, -}; - -static struct platform_device nand_flash_device = { - .name = "sh_flctl", - .resource = nand_flash_resources, - .num_resources = ARRAY_SIZE(nand_flash_resources), - .dev = { - .platform_data = &nand_flash_data, - }, -}; - -static struct resource irda_resources[] = { - [0] = { - .start = 0xE6D00000, - .end = 0xE6D01FD4 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x480), /* IRDA */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device irda_device = { - .name = "sh_irda", - .id = -1, - .resource = irda_resources, - .num_resources = ARRAY_SIZE(irda_resources), -}; - -static struct platform_device *g3evm_devices[] __initdata = { - &nor_flash_device, - &usb_host_device, - &keysc_device, - &nand_flash_device, - &irda_device, -}; - -static void __init g3evm_init(void) -{ - sh7367_pinmux_init(); - - /* Lit DS4 LED */ - gpio_request(GPIO_PORT22, NULL); - gpio_direction_output(GPIO_PORT22, 1); - gpio_export(GPIO_PORT22, 0); - - /* Lit DS8 LED */ - gpio_request(GPIO_PORT23, NULL); - gpio_direction_output(GPIO_PORT23, 1); - gpio_export(GPIO_PORT23, 0); - - /* Lit DS3 LED */ - gpio_request(GPIO_PORT24, NULL); - gpio_direction_output(GPIO_PORT24, 1); - gpio_export(GPIO_PORT24, 0); - - /* SCIFA1 */ - gpio_request(GPIO_FN_SCIFA1_TXD, NULL); - gpio_request(GPIO_FN_SCIFA1_RXD, NULL); - gpio_request(GPIO_FN_SCIFA1_CTS, NULL); - gpio_request(GPIO_FN_SCIFA1_RTS, NULL); - - /* USBHS */ - gpio_request(GPIO_FN_VBUS0, NULL); - gpio_request(GPIO_FN_PWEN, NULL); - gpio_request(GPIO_FN_OVCN, NULL); - gpio_request(GPIO_FN_OVCN2, NULL); - gpio_request(GPIO_FN_EXTLP, NULL); - gpio_request(GPIO_FN_IDIN, NULL); - - /* setup USB phy */ - __raw_writew(0x0300, IOMEM(0xe605810a)); /* USBCR1 */ - __raw_writew(0x00e0, IOMEM(0xe60581c0)); /* CPFCH */ - __raw_writew(0x6010, IOMEM(0xe60581c6)); /* CGPOSR */ - __raw_writew(0x8a0a, IOMEM(0xe605810c)); /* USBCR2 */ - - /* KEYSC @ CN7 */ - gpio_request(GPIO_FN_PORT42_KEYOUT0, NULL); - gpio_request(GPIO_FN_PORT43_KEYOUT1, NULL); - gpio_request(GPIO_FN_PORT44_KEYOUT2, NULL); - gpio_request(GPIO_FN_PORT45_KEYOUT3, NULL); - gpio_request(GPIO_FN_PORT46_KEYOUT4, NULL); - gpio_request(GPIO_FN_PORT47_KEYOUT5, NULL); - gpio_request(GPIO_FN_PORT48_KEYIN0_PU, NULL); - gpio_request(GPIO_FN_PORT49_KEYIN1_PU, NULL); - gpio_request(GPIO_FN_PORT50_KEYIN2_PU, NULL); - gpio_request(GPIO_FN_PORT55_KEYIN3_PU, NULL); - gpio_request(GPIO_FN_PORT56_KEYIN4_PU, NULL); - gpio_request(GPIO_FN_PORT57_KEYIN5_PU, NULL); - gpio_request(GPIO_FN_PORT58_KEYIN6_PU, NULL); - - /* FLCTL */ - gpio_request(GPIO_FN_FCE0, NULL); - gpio_request(GPIO_FN_D0_ED0_NAF0, NULL); - gpio_request(GPIO_FN_D1_ED1_NAF1, NULL); - gpio_request(GPIO_FN_D2_ED2_NAF2, NULL); - gpio_request(GPIO_FN_D3_ED3_NAF3, NULL); - gpio_request(GPIO_FN_D4_ED4_NAF4, NULL); - gpio_request(GPIO_FN_D5_ED5_NAF5, NULL); - gpio_request(GPIO_FN_D6_ED6_NAF6, NULL); - gpio_request(GPIO_FN_D7_ED7_NAF7, NULL); - gpio_request(GPIO_FN_D8_ED8_NAF8, NULL); - gpio_request(GPIO_FN_D9_ED9_NAF9, NULL); - gpio_request(GPIO_FN_D10_ED10_NAF10, NULL); - gpio_request(GPIO_FN_D11_ED11_NAF11, NULL); - gpio_request(GPIO_FN_D12_ED12_NAF12, NULL); - gpio_request(GPIO_FN_D13_ED13_NAF13, NULL); - gpio_request(GPIO_FN_D14_ED14_NAF14, NULL); - gpio_request(GPIO_FN_D15_ED15_NAF15, NULL); - gpio_request(GPIO_FN_WE0_XWR0_FWE, NULL); - gpio_request(GPIO_FN_FRB, NULL); - /* FOE, FCDE, FSC on dedicated pins */ - __raw_writel(__raw_readl(IOMEM(0xe6158048)) & ~(1 << 15), IOMEM(0xe6158048)); - - /* IrDA */ - gpio_request(GPIO_FN_IRDA_OUT, NULL); - gpio_request(GPIO_FN_IRDA_IN, NULL); - gpio_request(GPIO_FN_IRDA_FIRSEL, NULL); - - sh7367_add_standard_devices(); - - platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices)); -} - -MACHINE_START(G3EVM, "g3evm") - .map_io = sh7367_map_io, - .init_early = sh7367_add_early_devices, - .init_irq = sh7367_init_irq, - .handle_irq = shmobile_handle_irq_intc, - .init_machine = g3evm_init, - .init_late = shmobile_init_late, - .timer = &shmobile_timer, -MACHINE_END diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c deleted file mode 100644 index 35c126caa4d8..000000000000 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ /dev/null @@ -1,384 +0,0 @@ -/* - * G4EVM board support - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2008 Yoshihiro Shimoda - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/usb/r8a66597.h> -#include <linux/io.h> -#include <linux/input.h> -#include <linux/input/sh_keysc.h> -#include <linux/mmc/host.h> -#include <linux/mmc/sh_mobile_sdhi.h> -#include <linux/gpio.h> -#include <linux/dma-mapping.h> -#include <mach/irqs.h> -#include <mach/sh7377.h> -#include <mach/common.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "sh-gpio.h" - -/* - * SDHI - * - * SDHI0 : card detection is possible - * SDHI1 : card detection is impossible - * - * [G4-MAIN-BOARD] - * JP74 : short # DBG_2V8A for SDHI0 - * JP75 : NC # DBG_3V3A for SDHI0 - * JP76 : NC # DBG_3V3A_SD for SDHI0 - * JP77 : NC # 3V3A_SDIO for SDHI1 - * JP78 : short # DBG_2V8A for SDHI1 - * JP79 : NC # DBG_3V3A for SDHI1 - * JP80 : NC # DBG_3V3A_SD for SDHI1 - * - * [G4-CORE-BOARD] - * S32 : all off # to dissever from G3-CORE_DBG board - * S33 : all off # to dissever from G3-CORE_DBG board - * - * [G3-CORE_DBG-BOARD] - * S1 : all off # to dissever from G3-CORE_DBG board - * S3 : all off # to dissever from G3-CORE_DBG board - * S4 : all off # to dissever from G3-CORE_DBG board - */ - -static struct mtd_partition nor_flash_partitions[] = { - { - .name = "loader", - .offset = 0x00000000, - .size = 512 * 1024, - }, - { - .name = "bootenv", - .offset = MTDPART_OFS_APPEND, - .size = 512 * 1024, - }, - { - .name = "kernel_ro", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - }, - { - .name = "data", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data nor_flash_data = { - .width = 2, - .parts = nor_flash_partitions, - .nr_parts = ARRAY_SIZE(nor_flash_partitions), -}; - -static struct resource nor_flash_resources[] = { - [0] = { - .start = 0x00000000, - .end = 0x08000000 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device nor_flash_device = { - .name = "physmap-flash", - .dev = { - .platform_data = &nor_flash_data, - }, - .num_resources = ARRAY_SIZE(nor_flash_resources), - .resource = nor_flash_resources, -}; - -/* USBHS */ -static void usb_host_port_power(int port, int power) -{ - if (!power) /* only power-on supported for now */ - return; - - /* set VBOUT/PWEN and EXTLP0 in DVSTCTR */ - __raw_writew(__raw_readw(IOMEM(0xe6890008)) | 0x600, IOMEM(0xe6890008)); -} - -static struct r8a66597_platdata usb_host_data = { - .on_chip = 1, - .port_power = usb_host_port_power, -}; - -static struct resource usb_host_resources[] = { - [0] = { - .name = "USBHS", - .start = 0xe6890000, - .end = 0xe68900e5, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0a20), /* USBHS_USHI0 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb_host_device = { - .name = "r8a66597_hcd", - .id = 0, - .dev = { - .platform_data = &usb_host_data, - .dma_mask = NULL, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(usb_host_resources), - .resource = usb_host_resources, -}; - -/* KEYSC */ -static struct sh_keysc_info keysc_info = { - .mode = SH_KEYSC_MODE_5, - .scan_timing = 3, - .delay = 100, - .keycodes = { - KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, - KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, - KEY_M, KEY_N, KEY_U, KEY_P, KEY_Q, KEY_R, - KEY_S, KEY_T, KEY_U, KEY_V, KEY_W, KEY_X, - KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, - KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, - KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER, - }, -}; - -static struct resource keysc_resources[] = { - [0] = { - .name = "KEYSC", - .start = 0xe61b0000, - .end = 0xe61b000f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0be0), /* KEYSC_KEY */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device keysc_device = { - .name = "sh_keysc", - .id = 0, /* keysc0 clock */ - .num_resources = ARRAY_SIZE(keysc_resources), - .resource = keysc_resources, - .dev = { - .platform_data = &keysc_info, - }, -}; - -/* Fixed 3.3V regulator to be used by SDHI0 and SDHI1 */ -static struct regulator_consumer_supply fixed3v3_power_consumers[] = -{ - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), -}; - -/* SDHI */ -static struct sh_mobile_sdhi_info sdhi0_info = { - .tmio_caps = MMC_CAP_SDIO_IRQ, -}; - -static struct resource sdhi0_resources[] = { - [0] = { - .name = "SDHI0", - .start = 0xe6d50000, - .end = 0xe6d500ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0e00), /* SDHI0 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sdhi0_device = { - .name = "sh_mobile_sdhi", - .num_resources = ARRAY_SIZE(sdhi0_resources), - .resource = sdhi0_resources, - .id = 0, - .dev = { - .platform_data = &sdhi0_info, - }, -}; - -static struct sh_mobile_sdhi_info sdhi1_info = { - .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ, -}; - -static struct resource sdhi1_resources[] = { - [0] = { - .name = "SDHI1", - .start = 0xe6d60000, - .end = 0xe6d600ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0e80), /* SDHI1 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sdhi1_device = { - .name = "sh_mobile_sdhi", - .num_resources = ARRAY_SIZE(sdhi1_resources), - .resource = sdhi1_resources, - .id = 1, - .dev = { - .platform_data = &sdhi1_info, - }, -}; - -static struct platform_device *g4evm_devices[] __initdata = { - &nor_flash_device, - &usb_host_device, - &keysc_device, - &sdhi0_device, - &sdhi1_device, -}; - -#define GPIO_SDHID0_D0 IOMEM(0xe60520fc) -#define GPIO_SDHID0_D1 IOMEM(0xe60520fd) -#define GPIO_SDHID0_D2 IOMEM(0xe60520fe) -#define GPIO_SDHID0_D3 IOMEM(0xe60520ff) -#define GPIO_SDHICMD0 IOMEM(0xe6052100) - -#define GPIO_SDHID1_D0 IOMEM(0xe6052103) -#define GPIO_SDHID1_D1 IOMEM(0xe6052104) -#define GPIO_SDHID1_D2 IOMEM(0xe6052105) -#define GPIO_SDHID1_D3 IOMEM(0xe6052106) -#define GPIO_SDHICMD1 IOMEM(0xe6052107) - -static void __init g4evm_init(void) -{ - regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, - ARRAY_SIZE(fixed3v3_power_consumers), 3300000); - - sh7377_pinmux_init(); - - /* Lit DS14 LED */ - gpio_request(GPIO_PORT109, NULL); - gpio_direction_output(GPIO_PORT109, 1); - gpio_export(GPIO_PORT109, 1); - - /* Lit DS15 LED */ - gpio_request(GPIO_PORT110, NULL); - gpio_direction_output(GPIO_PORT110, 1); - gpio_export(GPIO_PORT110, 1); - - /* Lit DS16 LED */ - gpio_request(GPIO_PORT112, NULL); - gpio_direction_output(GPIO_PORT112, 1); - gpio_export(GPIO_PORT112, 1); - - /* Lit DS17 LED */ - gpio_request(GPIO_PORT113, NULL); - gpio_direction_output(GPIO_PORT113, 1); - gpio_export(GPIO_PORT113, 1); - - /* USBHS */ - gpio_request(GPIO_FN_VBUS_0, NULL); - gpio_request(GPIO_FN_PWEN, NULL); - gpio_request(GPIO_FN_OVCN, NULL); - gpio_request(GPIO_FN_OVCN2, NULL); - gpio_request(GPIO_FN_EXTLP, NULL); - gpio_request(GPIO_FN_IDIN, NULL); - - /* setup USB phy */ - __raw_writew(0x0200, IOMEM(0xe605810a)); /* USBCR1 */ - __raw_writew(0x00e0, IOMEM(0xe60581c0)); /* CPFCH */ - __raw_writew(0x6010, IOMEM(0xe60581c6)); /* CGPOSR */ - __raw_writew(0x8a0a, IOMEM(0xe605810c)); /* USBCR2 */ - - /* KEYSC @ CN31 */ - gpio_request(GPIO_FN_PORT60_KEYOUT5, NULL); - gpio_request(GPIO_FN_PORT61_KEYOUT4, NULL); - gpio_request(GPIO_FN_PORT62_KEYOUT3, NULL); - gpio_request(GPIO_FN_PORT63_KEYOUT2, NULL); - gpio_request(GPIO_FN_PORT64_KEYOUT1, NULL); - gpio_request(GPIO_FN_PORT65_KEYOUT0, NULL); - gpio_request(GPIO_FN_PORT66_KEYIN0_PU, NULL); - gpio_request(GPIO_FN_PORT67_KEYIN1_PU, NULL); - gpio_request(GPIO_FN_PORT68_KEYIN2_PU, NULL); - gpio_request(GPIO_FN_PORT69_KEYIN3_PU, NULL); - gpio_request(GPIO_FN_PORT70_KEYIN4_PU, NULL); - gpio_request(GPIO_FN_PORT71_KEYIN5_PU, NULL); - gpio_request(GPIO_FN_PORT72_KEYIN6_PU, NULL); - - /* SDHI0 */ - gpio_request(GPIO_FN_SDHICLK0, NULL); - gpio_request(GPIO_FN_SDHICD0, NULL); - gpio_request(GPIO_FN_SDHID0_0, NULL); - gpio_request(GPIO_FN_SDHID0_1, NULL); - gpio_request(GPIO_FN_SDHID0_2, NULL); - gpio_request(GPIO_FN_SDHID0_3, NULL); - gpio_request(GPIO_FN_SDHICMD0, NULL); - gpio_request(GPIO_FN_SDHIWP0, NULL); - gpio_request_pullup(GPIO_SDHID0_D0); - gpio_request_pullup(GPIO_SDHID0_D1); - gpio_request_pullup(GPIO_SDHID0_D2); - gpio_request_pullup(GPIO_SDHID0_D3); - gpio_request_pullup(GPIO_SDHICMD0); - - /* SDHI1 */ - gpio_request(GPIO_FN_SDHICLK1, NULL); - gpio_request(GPIO_FN_SDHID1_0, NULL); - gpio_request(GPIO_FN_SDHID1_1, NULL); - gpio_request(GPIO_FN_SDHID1_2, NULL); - gpio_request(GPIO_FN_SDHID1_3, NULL); - gpio_request(GPIO_FN_SDHICMD1, NULL); - gpio_request_pullup(GPIO_SDHID1_D0); - gpio_request_pullup(GPIO_SDHID1_D1); - gpio_request_pullup(GPIO_SDHID1_D2); - gpio_request_pullup(GPIO_SDHID1_D3); - gpio_request_pullup(GPIO_SDHICMD1); - - sh7377_add_standard_devices(); - - platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices)); -} - -MACHINE_START(G4EVM, "g4evm") - .map_io = sh7377_map_io, - .init_early = sh7377_add_early_devices, - .init_irq = sh7377_init_irq, - .handle_irq = shmobile_handle_irq_intc, - .init_machine = g4evm_init, - .init_late = shmobile_init_late, - .timer = &shmobile_timer, -MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 0a43f3189c21..f63f2eeb0205 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -384,6 +384,8 @@ static struct regulator_consumer_supply fixed2v8_power_consumers[] = /* SDHI */ static struct sh_mobile_sdhi_info sdhi0_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_SD_HIGHSPEED, .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, @@ -424,6 +426,8 @@ static struct platform_device sdhi0_device = { /* Micro SD */ static struct sh_mobile_sdhi_info sdhi2_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI2_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI2_RX, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD | TMIO_MMC_WRPROTECT_DISABLE, @@ -557,7 +561,15 @@ static struct i2c_board_info i2c0_devices[] = { }, { I2C_BOARD_INFO("r2025sd", 0x32), - } + }, + { + I2C_BOARD_INFO("ak8975", 0x0c), + .irq = intcs_evt2irq(0x3380), /* IRQ28 */ + }, + { + I2C_BOARD_INFO("adxl34x", 0x1d), + .irq = intcs_evt2irq(0x3340), /* IRQ26 */ + }, }; static struct i2c_board_info i2c1_devices[] = { diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 0c27c810cf99..39b8f2e70638 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1651,7 +1651,12 @@ static void __init mackerel_init(void) pm_clk_add(&hdmi_lcdc_device.dev, "hdmi"); } -MACHINE_START(MACKEREL, "mackerel") +static const char *mackerel_boards_compat_dt[] __initdata = { + "renesas,mackerel", + NULL, +}; + +DT_MACHINE_START(MACKEREL_DT, "mackerel") .map_io = sh7372_map_io, .init_early = sh7372_add_early_devices, .init_irq = sh7372_init_irq, @@ -1659,4 +1664,5 @@ MACHINE_START(MACKEREL, "mackerel") .init_machine = mackerel_init, .init_late = sh7372_pm_init_late, .timer = &shmobile_timer, + .dt_compat = mackerel_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index b8a7525a4e2f..69f7f464eff8 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -30,6 +30,8 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/smsc911x.h> +#include <linux/spi/spi.h> +#include <linux/spi/sh_hspi.h> #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <mach/hardware.h> @@ -126,10 +128,27 @@ static struct platform_device thermal_device = { .num_resources = ARRAY_SIZE(thermal_resources), }; +/* HSPI */ +static struct resource hspi_resources[] = { + [0] = { + .start = 0xFFFC7000, + .end = 0xFFFC7018 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device hspi_device = { + .name = "sh-hspi", + .id = 0, + .resource = hspi_resources, + .num_resources = ARRAY_SIZE(hspi_resources), +}; + static struct platform_device *marzen_devices[] __initdata = { ð_device, &sdhi0_device, &thermal_device, + &hspi_device, }; static void __init marzen_init(void) @@ -163,6 +182,12 @@ static void __init marzen_init(void) gpio_request(GPIO_FN_SD0_CD, NULL); gpio_request(GPIO_FN_SD0_WP, NULL); + /* HSPI 0 */ + gpio_request(GPIO_FN_HSPI_CLK0, NULL); + gpio_request(GPIO_FN_HSPI_CS0, NULL); + gpio_request(GPIO_FN_HSPI_TX0, NULL); + gpio_request(GPIO_FN_HSPI_RX0, NULL); + r8a7779_add_standard_devices(); platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices)); } diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 2917668f0091..ebbffc25f24f 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -247,7 +247,7 @@ void __init r8a7779_add_standard_devices(void) { #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*16way */ - l2x0_init((void __iomem __force *)(0xf0100000), 0x40470000, 0x82000fff); + l2x0_init(IOMEM(0xf0100000), 0x40470000, 0x82000fff); #endif r8a7779_pm_init(); diff --git a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h +++ /dev/null diff --git a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h +++ /dev/null diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 2236cbd03cd7..1f3fbc2bb776 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -16,6 +16,7 @@ #include <linux/stat.h> #include <linux/of.h> #include <linux/of_irq.h> +#include <linux/irq.h> #include <linux/platform_data/clk-ux500.h> #include <asm/hardware/gic.h> diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index b9f60ebe3bc4..023f443784ec 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -856,8 +856,10 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (thumb2_32b) { offset.un = 0; handler = do_alignment_t32_to_handler(&instr, regs, &offset); - } else + } else { + offset.un = 0; handler = do_alignment_ldmstm; + } break; default: diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 477a2d23ddf1..58bc3e4d3bd0 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -610,7 +610,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, pgprot_t prot, bool is_coherent, const void *caller) { u64 mask = get_coherent_dma_mask(dev); - struct page *page; + struct page *page = NULL; void *addr; #ifdef CONFIG_DMA_API_DEBUG diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h index bf312c354a21..0f5a5f2a2c7b 100644 --- a/arch/arm/mm/vmregion.h +++ b/arch/arm/mm/vmregion.h @@ -17,7 +17,6 @@ struct arm_vmregion { struct list_head vm_list; unsigned long vm_start; unsigned long vm_end; - void *priv; int vm_active; const void *caller; }; diff --git a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c index 540d3a7d92df..e7b920b58675 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c +++ b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c @@ -55,7 +55,7 @@ struct platform_device *__init imx_add_mxc_mmc( struct resource res[] = { { .start = data->iobase, - .end = data->iobase + SZ_4K - 1, + .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, }, { .start = data->irq, diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 7cd56ed5cd94..82fcb206b5b2 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -26,6 +26,7 @@ config ARCH_OMAP2PLUS select CLKDEV_LOOKUP select GENERIC_IRQ_CHIP select OMAP_DM_TIMER + select PINCTRL select PROC_DEVICETREE if PROC_FS select SPARSE_IRQ select USE_OF diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index f4a4cd014795..1957a8516e93 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -40,10 +40,10 @@ #define OMAP_UART_WER_MOD_WKUP 0X7F /* Enable XON/XOFF flow control on output */ -#define OMAP_UART_SW_TX 0x8 +#define OMAP_UART_SW_TX 0x04 /* Enable XON/XOFF flow control on input */ -#define OMAP_UART_SW_RX 0x2 +#define OMAP_UART_SW_RX 0x04 #define OMAP_UART_SYSC_RESET 0X07 #define OMAP_UART_TCR_TRIG 0X0F diff --git a/arch/arm/plat-samsung/include/plat/spi-core.h b/arch/arm/plat-samsung/include/plat/spi-core.h new file mode 100644 index 000000000000..0b9428ab3fc3 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/spi-core.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PLAT_S3C_SPI_CORE_H +#define __PLAT_S3C_SPI_CORE_H + +/* These functions are only for use with the core support code, such as + * the cpu specific initialisation code + */ + +/* re-define device name depending on support. */ +static inline void s3c64xx_spi_setname(char *name) +{ +#ifdef CONFIG_S3C64XX_DEV_SPI0 + s3c64xx_device_spi0.name = name; +#endif +#ifdef CONFIG_S3C64XX_DEV_SPI1 + s3c64xx_device_spi1.name = name; +#endif +#ifdef CONFIG_S3C64XX_DEV_SPI2 + s3c64xx_device_spi2.name = name; +#endif +} + +#endif /* __PLAT_S3C_SPI_CORE_H */ diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile index 635cb1865e4d..cd60a81163e9 100644 --- a/arch/arm/tools/Makefile +++ b/arch/arm/tools/Makefile @@ -5,6 +5,6 @@ # include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types - @echo ' Generating $@' + $(kecho) ' Generating $@' @mkdir -p $(dir $@) $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } diff --git a/arch/arm/xen/grant-table.c b/arch/arm/xen/grant-table.c index dbd1330c0196..859a9bb002d5 100644 --- a/arch/arm/xen/grant-table.c +++ b/arch/arm/xen/grant-table.c @@ -33,7 +33,7 @@ #include <xen/page.h> #include <xen/grant_table.h> -int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes, +int arch_gnttab_map_shared(xen_pfn_t *frames, unsigned long nr_gframes, unsigned long max_nr_gframes, void **__shared) { diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S index 074f5ed101b9..71f723984cbd 100644 --- a/arch/arm/xen/hypercall.S +++ b/arch/arm/xen/hypercall.S @@ -48,20 +48,16 @@ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/opcodes-virt.h> #include <xen/interface/xen.h> -/* HVC 0xEA1 */ -#ifdef CONFIG_THUMB2_KERNEL -#define xen_hvc .word 0xf7e08ea1 -#else -#define xen_hvc .word 0xe140ea71 -#endif +#define XEN_IMM 0xEA1 #define HYPERCALL_SIMPLE(hypercall) \ ENTRY(HYPERVISOR_##hypercall) \ mov r12, #__HYPERVISOR_##hypercall; \ - xen_hvc; \ + __HVC(XEN_IMM); \ mov pc, lr; \ ENDPROC(HYPERVISOR_##hypercall) @@ -76,7 +72,7 @@ ENTRY(HYPERVISOR_##hypercall) \ stmdb sp!, {r4} \ ldr r4, [sp, #4] \ mov r12, #__HYPERVISOR_##hypercall; \ - xen_hvc \ + __HVC(XEN_IMM); \ ldm sp!, {r4} \ mov pc, lr \ ENDPROC(HYPERVISOR_##hypercall) @@ -100,7 +96,7 @@ ENTRY(privcmd_call) mov r2, r3 ldr r3, [sp, #8] ldr r4, [sp, #4] - xen_hvc + __HVC(XEN_IMM) ldm sp!, {r4} mov pc, lr ENDPROC(privcmd_call); |