diff options
Diffstat (limited to 'arch/arm')
108 files changed, 1550 insertions, 1829 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b9f7121e6ecf..f0895c581a89 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -177,7 +177,9 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear320-evb.dtb \ spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb -dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \ +dtb-$(CONFIG_ARCH_SUNXI) += \ + sun4i-a10-cubieboard.dtb \ + sun4i-a10-mini-xplus.dtb \ sun4i-a10-hackberry.dtb \ sun5i-a13-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts index 29b9f15e7599..54cb5cf8604a 100644 --- a/arch/arm/boot/dts/aks-cdu.dts +++ b/arch/arm/boot/dts/aks-cdu.dts @@ -9,7 +9,7 @@ /dts-v1/; -/include/ "ge863-pro3.dtsi" +#include "ge863-pro3.dtsi" / { chosen { @@ -46,7 +46,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 15 0>; + atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; @@ -90,23 +90,23 @@ compatible = "gpio-leds"; red { - gpios = <&pioC 10 0>; + gpios = <&pioC 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "none"; }; green { - gpios = <&pioA 5 1>; + gpios = <&pioA 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; default-state = "on"; }; yellow { - gpios = <&pioB 20 1>; + gpios = <&pioB 20 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; blue { - gpios = <&pioB 21 1>; + gpios = <&pioB 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; }; diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 5160210f74da..3a1de9eb5111 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "at91sam9260.dtsi" +#include "at91sam9260.dtsi" / { model = "Somfy Animeo IP"; @@ -123,7 +123,7 @@ usb0: ohci@00500000 { num-ports = <2>; - atmel,vbus-gpio = <&pioB 15 1>; + atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>; status = "okay"; }; }; @@ -133,23 +133,23 @@ power_green { label = "power_green"; - gpios = <&pioC 17 0>; + gpios = <&pioC 17 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; power_red { label = "power_red"; - gpios = <&pioA 2 0>; + gpios = <&pioA 2 GPIO_ACTIVE_HIGH>; }; tx_green { label = "tx_green"; - gpios = <&pioC 19 0>; + gpios = <&pioC 19 GPIO_ACTIVE_HIGH>; }; tx_red { label = "tx_red"; - gpios = <&pioC 18 0>; + gpios = <&pioC 18 GPIO_ACTIVE_HIGH>; }; }; @@ -160,21 +160,21 @@ keyswitch_in { label = "keyswitch_in"; - gpios = <&pioB 1 0>; + gpios = <&pioB 1 GPIO_ACTIVE_HIGH>; linux,code = <28>; gpio-key,wakeup; }; error_in { label = "error_in"; - gpios = <&pioB 2 0>; + gpios = <&pioB 2 GPIO_ACTIVE_HIGH>; linux,code = <29>; gpio-key,wakeup; }; btn { label = "btn"; - gpios = <&pioC 23 0>; + gpios = <&pioC 23 GPIO_ACTIVE_HIGH>; linux,code = <31>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 272bbc65fab0..550eb772c30e 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -33,7 +33,8 @@ #size-cells = <1>; compatible = "simple-bus"; interrupt-parent = <&mpic>; - ranges = <0 0 0xd0000000 0x100000>; + ranges = <0 0 0xd0000000 0x0100000 /* internal registers */ + 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>; internal-regs { compatible = "simple-bus"; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index b2c1b5af9749..aee2b1866ce2 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -29,7 +29,8 @@ }; soc { - ranges = <0 0xd0000000 0x100000>; + ranges = <0 0xd0000000 0x0100000 /* internal registers */ + 0xe0000000 0xe0000000 0x8100000 /* PCIe */>; internal-regs { system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; @@ -38,12 +39,12 @@ L2: l2-cache { compatible = "marvell,aurora-outer-cache"; - reg = <0xd0008000 0x1000>; + reg = <0x08000 0x1000>; cache-id-part = <0x100>; wt-override; }; - mpic: interrupt-controller@20000 { + interrupt-controller@20000 { reg = <0x20a00 0x1d0>, <0x21870 0x58>; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 26ad06fc147e..3ee63d128e27 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -39,6 +39,9 @@ }; soc { + ranges = <0 0 0xd0000000 0x100000 + 0xf0000000 0 0xf0000000 0x1000000>; + internal-regs { serial@12000 { clock-frequency = <250000000>; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index f14d36c46159..46b785064dd8 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -27,6 +27,9 @@ }; soc { + ranges = <0 0 0xd0000000 0x100000 + 0xf0000000 0 0xf0000000 0x8000000>; + internal-regs { serial@12000 { clock-frequency = <250000000>; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index bacab11c10dc..5b902f9a3af2 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -31,7 +31,7 @@ wt-override; }; - mpic: interrupt-controller@20000 { + interrupt-controller@20000 { reg = <0x20a00 0x2d0>, <0x21070 0x58>; }; diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts index c7aebba4e8e7..5ede7678f298 100644 --- a/arch/arm/boot/dts/at91-ariag25.dts +++ b/arch/arm/boot/dts/at91-ariag25.dts @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g25.dtsi" +#include "at91sam9g25.dtsi" / { model = "Acme Systems Aria G25"; @@ -156,7 +156,7 @@ /* little green LED in middle of Aria G25 module */ aria_led { label = "aria_led"; - gpios = <&pioB 8 0>; /* PB8 */ + gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */ linux,default-trigger = "heartbeat"; }; @@ -164,7 +164,7 @@ onewire@0 { compatible = "w1-gpio"; - gpios = <&pioA 21 1>; + gpios = <&pioA 21 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_w1_0>; }; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 5d3ed5aafc69..4aad0d9f5462 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -10,7 +10,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91RM9200 family SoC"; @@ -77,25 +80,29 @@ st: timer@fffffd00 { compatible = "atmel,at91rm9200-st"; reg = <0xfffffd00 0x100>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; tcb0: timer@fffa0000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa0000 0x100>; - interrupts = <17 4 0 18 4 0 19 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 + 18 IRQ_TYPE_LEVEL_HIGH 0 + 19 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@fffa4000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa4000 0x100>; - interrupts = <20 4 0 21 4 0 22 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0 + 21 IRQ_TYPE_LEVEL_HIGH 0 + 22 IRQ_TYPE_LEVEL_HIGH 0>; }; i2c0: i2c@fffb8000 { compatible = "atmel,at91rm9200-i2c"; reg = <0xfffb8000 0x4000>; - interrupts = <12 4 6>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_twi>; #address-cells = <1>; @@ -106,7 +113,7 @@ mmc0: mmc@fffb4000 { compatible = "atmel,hsmci"; reg = <0xfffb4000 0x4000>; - interrupts = <10 4 0>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -115,7 +122,7 @@ ssc0: ssc@fffd0000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffd0000 0x4000>; - interrupts = <14 4 5>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disable"; @@ -124,7 +131,7 @@ ssc1: ssc@fffd4000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffd4000 0x4000>; - interrupts = <15 4 5>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disable"; @@ -133,7 +140,7 @@ ssc2: ssc@fffd8000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffd8000 0x4000>; - interrupts = <16 4 5>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; status = "disable"; @@ -142,7 +149,7 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at91rm9200-emac", "cdns,emac"; reg = <0xfffbc000 0x4000>; - interrupts = <24 4 3>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; @@ -167,234 +174,234 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <0 30 0x1 0x0 /* PA30 periph A */ - 0 31 0x1 0x1>; /* PA31 periph with pullup */ + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A */ + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA31 periph with pullup */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <0 17 0x1 0x0 /* PA17 periph A */ - 0 18 0x1 0x0>; /* PA18 periph A */ + <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA18 periph A */ }; pinctrl_uart0_rts: uart0_rts-0 { atmel,pins = - <0 20 0x1 0x0>; /* PA20 periph A */ + <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA20 periph A */ }; pinctrl_uart0_cts: uart0_cts-0 { atmel,pins = - <0 21 0x1 0x0>; /* PA21 periph A */ + <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA21 periph A */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <1 20 0x1 0x1 /* PB20 periph A with pullup */ - 1 21 0x1 0x0>; /* PB21 periph A */ + <AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB20 periph A with pullup */ + AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB21 periph A */ }; pinctrl_uart1_rts: uart1_rts-0 { atmel,pins = - <1 24 0x1 0x0>; /* PB24 periph A */ + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB24 periph A */ }; pinctrl_uart1_cts: uart1_cts-0 { atmel,pins = - <1 26 0x1 0x0>; /* PB26 periph A */ + <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB26 periph A */ }; pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 { atmel,pins = - <1 19 0x1 0x0 /* PB19 periph A */ - 1 25 0x1 0x0>; /* PB25 periph A */ + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB19 periph A */ + AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB25 periph A */ }; pinctrl_uart1_dcd: uart1_dcd-0 { atmel,pins = - <1 23 0x1 0x0>; /* PB23 periph A */ + <AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB23 periph A */ }; pinctrl_uart1_ri: uart1_ri-0 { atmel,pins = - <1 18 0x1 0x0>; /* PB18 periph A */ + <AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */ }; }; uart2 { pinctrl_uart2: uart2-0 { atmel,pins = - <0 22 0x1 0x0 /* PA22 periph A */ - 0 23 0x1 0x1>; /* PA23 periph A with pullup */ + <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA22 periph A */ + AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA23 periph A with pullup */ }; pinctrl_uart2_rts: uart2_rts-0 { atmel,pins = - <0 30 0x2 0x0>; /* PA30 periph B */ + <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */ }; pinctrl_uart2_cts: uart2_cts-0 { atmel,pins = - <0 31 0x2 0x0>; /* PA31 periph B */ + <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA31 periph B */ }; }; uart3 { pinctrl_uart3: uart3-0 { atmel,pins = - <0 5 0x2 0x1 /* PA5 periph B with pullup */ - 0 6 0x2 0x0>; /* PA6 periph B */ + <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA5 periph B with pullup */ + AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA6 periph B */ }; pinctrl_uart3_rts: uart3_rts-0 { atmel,pins = - <1 0 0x2 0x0>; /* PB0 periph B */ + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ }; pinctrl_uart3_cts: uart3_cts-0 { atmel,pins = - <1 1 0x2 0x0>; /* PB1 periph B */ + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <2 2 0x0 0x1 /* PC2 gpio RDY pin pull_up */ - 1 1 0x0 0x1>; /* PB1 gpio CD pin pull_up */ + <AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC2 gpio RDY pin pull_up */ + AT91_PIOB 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PB1 gpio CD pin pull_up */ }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = - <0 7 0x1 0x0 /* PA7 periph A */ - 0 8 0x1 0x0 /* PA8 periph A */ - 0 9 0x1 0x0 /* PA9 periph A */ - 0 10 0x1 0x0 /* PA10 periph A */ - 0 11 0x1 0x0 /* PA11 periph A */ - 0 12 0x1 0x0 /* PA12 periph A */ - 0 13 0x1 0x0 /* PA13 periph A */ - 0 14 0x1 0x0 /* PA14 periph A */ - 0 15 0x1 0x0 /* PA15 periph A */ - 0 16 0x1 0x0>; /* PA16 periph A */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA7 periph A */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA8 periph A */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA16 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = - <1 12 0x2 0x0 /* PB12 periph B */ - 1 13 0x2 0x0 /* PB13 periph B */ - 1 14 0x2 0x0 /* PB14 periph B */ - 1 15 0x2 0x0 /* PB15 periph B */ - 1 16 0x2 0x0 /* PB16 periph B */ - 1 17 0x2 0x0 /* PB17 periph B */ - 1 18 0x2 0x0 /* PB18 periph B */ - 1 19 0x2 0x0>; /* PB19 periph B */ + <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB12 periph B */ + AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB13 periph B */ + AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B */ + AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB15 periph B */ + AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB16 periph B */ + AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB17 periph B */ + AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB18 periph B */ + AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB19 periph B */ }; }; mmc0 { pinctrl_mmc0_clk: mmc0_clk-0 { atmel,pins = - <0 27 0x1 0x0>; /* PA27 periph A */ + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA27 periph A */ }; pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { atmel,pins = - <0 28 0x1 0x1 /* PA28 periph A with pullup */ - 0 29 0x1 0x1>; /* PA29 periph A with pullup */ + <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA28 periph A with pullup */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA29 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <1 3 0x2 0x1 /* PB3 periph B with pullup */ - 1 4 0x2 0x1 /* PB4 periph B with pullup */ - 1 5 0x2 0x1>; /* PB5 periph B with pullup */ + <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PB3 periph B with pullup */ + AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PB4 periph B with pullup */ + AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PB5 periph B with pullup */ }; pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { atmel,pins = - <0 8 0x2 0x1 /* PA8 periph B with pullup */ - 0 9 0x2 0x1>; /* PA9 periph B with pullup */ + <AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA8 periph B with pullup */ + AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA9 periph B with pullup */ }; pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { atmel,pins = - <0 10 0x2 0x1 /* PA10 periph B with pullup */ - 0 11 0x2 0x1 /* PA11 periph B with pullup */ - 0 12 0x2 0x1>; /* PA12 periph B with pullup */ + <AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA10 periph B with pullup */ + AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA11 periph B with pullup */ + AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA12 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A */ - 1 1 0x1 0x0 /* PB1 periph A */ - 1 2 0x1 0x0>; /* PB2 periph A */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <1 3 0x1 0x0 /* PB3 periph A */ - 1 4 0x1 0x0 /* PB4 periph A */ - 1 5 0x1 0x0>; /* PB5 periph A */ + <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx-0 { atmel,pins = - <1 6 0x1 0x0 /* PB6 periph A */ - 1 7 0x1 0x0 /* PB7 periph A */ - 1 8 0x1 0x0>; /* PB8 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */ }; pinctrl_ssc1_rx: ssc1_rx-0 { atmel,pins = - <1 9 0x1 0x0 /* PB9 periph A */ - 1 10 0x1 0x0 /* PB10 periph A */ - 1 11 0x1 0x0>; /* PB11 periph A */ + <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */ }; }; ssc2 { pinctrl_ssc2_tx: ssc2_tx-0 { atmel,pins = - <1 12 0x1 0x0 /* PB12 periph A */ - 1 13 0x1 0x0 /* PB13 periph A */ - 1 14 0x1 0x0>; /* PB14 periph A */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A */ }; pinctrl_ssc2_rx: ssc2_rx-0 { atmel,pins = - <1 15 0x1 0x0 /* PB15 periph A */ - 1 16 0x1 0x0 /* PB16 periph A */ - 1 17 0x1 0x0>; /* PB17 periph A */ + <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */ }; }; twi { pinctrl_twi: twi-0 { atmel,pins = - <0 25 0x1 0x2 /* PA25 periph A with multi drive */ - 0 26 0x1 0x2>; /* PA26 periph A with multi drive */ + <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE /* PA25 periph A with multi drive */ + AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>; /* PA26 periph A with multi drive */ }; pinctrl_twi_gpio: twi_gpio-0 { atmel,pins = - <0 25 0x0 0x2 /* PA25 GPIO with multi drive */ - 0 26 0x0 0x2>; /* PA26 GPIO with multi drive */ + <AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA25 GPIO with multi drive */ + AT91_PIOA 26 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PA26 GPIO with multi drive */ }; }; pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -404,7 +411,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -414,7 +421,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -424,7 +431,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <5 4 1>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -435,7 +442,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -444,7 +451,7 @@ usart0: serial@fffc0000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc0000 0x200>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -455,7 +462,7 @@ usart1: serial@fffc4000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc4000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -466,7 +473,7 @@ usart2: serial@fffc8000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffc8000 0x200>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -477,7 +484,7 @@ usart3: serial@fffcc000 { compatible = "atmel,at91rm9200-usart"; reg = <0xfffcc000 0x200>; - interrupts = <23 4 5>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -488,7 +495,7 @@ usb1: gadget@fffb0000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfffb0000 0x4000>; - interrupts = <11 4 2>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; @@ -503,9 +510,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; nand-ecc-mode = "soft"; - gpios = <&pioC 2 0 + gpios = <&pioC 2 GPIO_ACTIVE_HIGH 0 - &pioB 1 0 + &pioB 1 GPIO_ACTIVE_HIGH >; status = "disabled"; }; @@ -513,15 +520,15 @@ usb0: ohci@00300000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00300000 0x100000>; - interrupts = <23 4 2>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 25 0 /* sda */ - &pioA 26 0 /* scl */ + gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */ + &pioA 26 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index e586d85f8e23..14058125d123 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91rm9200.dtsi" +#include "at91rm9200.dtsi" / { model = "Atmel AT91RM9200 evaluation kit"; @@ -50,7 +50,7 @@ }; usb1: gadget@fffb0000 { - atmel,vbus-gpio = <&pioD 4 0>; + atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; @@ -66,19 +66,19 @@ ds2 { label = "green"; - gpios = <&pioB 0 0x1>; + gpios = <&pioB 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; ds4 { label = "yellow"; - gpios = <&pioB 1 0x1>; + gpios = <&pioB 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; ds6 { label = "red"; - gpios = <&pioB 2 0x1>; + gpios = <&pioB 2 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 70b5ccbac234..44851b977069 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -8,7 +8,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9260 family SoC"; @@ -84,19 +87,23 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; tcb0: timer@fffa0000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa0000 0x100>; - interrupts = <17 4 0 18 4 0 19 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 + 18 IRQ_TYPE_LEVEL_HIGH 0 + 19 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@fffdc000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffdc000 0x100>; - interrupts = <26 4 0 27 4 0 28 4 0>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0 + 27 IRQ_TYPE_LEVEL_HIGH 0 + 28 IRQ_TYPE_LEVEL_HIGH 0>; }; pinctrl@fffff400 { @@ -116,234 +123,234 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <1 14 0x1 0x0 /* PB14 periph A */ - 1 15 0x1 0x1>; /* PB15 periph with pullup */ + <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB15 periph with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <1 4 0x1 0x0 /* PB4 periph A */ - 1 5 0x1 0x0>; /* PB5 periph A */ + <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <1 26 0x1 0x0>; /* PB26 periph A */ + <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB26 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <1 27 0x1 0x0>; /* PB27 periph A */ + <AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB27 periph A */ }; pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 { atmel,pins = - <1 24 0x1 0x0 /* PB24 periph A */ - 1 22 0x1 0x0>; /* PB22 periph A */ + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB24 periph A */ + AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB22 periph A */ }; pinctrl_usart0_dcd: usart0_dcd-0 { atmel,pins = - <1 23 0x1 0x0>; /* PB23 periph A */ + <AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB23 periph A */ }; pinctrl_usart0_ri: usart0_ri-0 { atmel,pins = - <1 25 0x1 0x0>; /* PB25 periph A */ + <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB25 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <1 6 0x1 0x1 /* PB6 periph A with pullup */ - 1 7 0x1 0x0>; /* PB7 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB6 periph A with pullup */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <1 28 0x1 0x0>; /* PB28 periph A */ + <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB28 periph A */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <1 29 0x1 0x0>; /* PB29 periph A */ + <AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB29 periph A */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <1 8 0x1 0x1 /* PB8 periph A with pullup */ - 1 9 0x1 0x0>; /* PB9 periph A */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB8 periph A with pullup */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB9 periph A */ }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <0 4 0x1 0x0>; /* PA4 periph A */ + <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA4 periph A */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <0 5 0x1 0x0>; /* PA5 periph A */ + <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA5 periph A */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <1 10 0x1 0x1 /* PB10 periph A with pullup */ - 1 11 0x1 0x0>; /* PB11 periph A */ + <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB10 periph A with pullup */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <2 8 0x2 0x0>; /* PC8 periph B */ + <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC8 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <2 10 0x2 0x0>; /* PC10 periph B */ + <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC10 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <0 31 0x2 0x1 /* PA31 periph B with pullup */ - 0 30 0x2 0x0>; /* PA30 periph B */ + <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA31 periph B with pullup */ + AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <1 12 0x1 0x1 /* PB12 periph A with pullup */ - 1 13 0x1 0x0>; /* PB13 periph A */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB12 periph A with pullup */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <2 13 0x0 0x1 /* PC13 gpio RDY pin pull_up */ - 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + <AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC13 gpio RDY pin pull_up */ + AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */ }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = - <0 12 0x1 0x0 /* PA12 periph A */ - 0 13 0x1 0x0 /* PA13 periph A */ - 0 14 0x1 0x0 /* PA14 periph A */ - 0 15 0x1 0x0 /* PA15 periph A */ - 0 16 0x1 0x0 /* PA16 periph A */ - 0 17 0x1 0x0 /* PA17 periph A */ - 0 18 0x1 0x0 /* PA18 periph A */ - 0 19 0x1 0x0 /* PA19 periph A */ - 0 20 0x1 0x0 /* PA20 periph A */ - 0 21 0x1 0x0>; /* PA21 periph A */ + <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA16 periph A */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA18 periph A */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA19 periph A */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA20 periph A */ + AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA21 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = - <0 22 0x2 0x0 /* PA22 periph B */ - 0 23 0x2 0x0 /* PA23 periph B */ - 0 24 0x2 0x0 /* PA24 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0 /* PA26 periph B */ - 0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B */ + AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA23 periph B */ + AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA26 periph B */ + AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ }; pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 { atmel,pins = - <0 10 0x2 0x0 /* PA10 periph B */ - 0 11 0x2 0x0 /* PA11 periph B */ - 0 24 0x2 0x0 /* PA24 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0 /* PA26 periph B */ - 0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + <AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA10 periph B */ + AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA11 periph B */ + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA26 periph B */ + AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ }; }; mmc0 { pinctrl_mmc0_clk: mmc0_clk-0 { atmel,pins = - <0 8 0x1 0x0>; /* PA8 periph A */ + <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */ }; pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { atmel,pins = - <0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 6 0x1 0x1>; /* PA6 periph A with pullup */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA6 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 9 0x1 0x1 /* PA9 periph A with pullup */ - 0 10 0x1 0x1 /* PA10 periph A with pullup */ - 0 11 0x1 0x1>; /* PA11 periph A with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA9 periph A with pullup */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA10 periph A with pullup */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA11 periph A with pullup */ }; pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { atmel,pins = - <0 1 0x2 0x1 /* PA1 periph B with pullup */ - 0 0 0x2 0x1>; /* PA0 periph B with pullup */ + <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA1 periph B with pullup */ + AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA0 periph B with pullup */ }; pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { atmel,pins = - <0 5 0x2 0x1 /* PA5 periph B with pullup */ - 0 4 0x2 0x1 /* PA4 periph B with pullup */ - 0 3 0x2 0x1>; /* PA3 periph B with pullup */ + <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA5 periph B with pullup */ + AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA4 periph B with pullup */ + AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA3 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <1 16 0x1 0x0 /* PB16 periph A */ - 1 17 0x1 0x0 /* PB17 periph A */ - 1 18 0x1 0x0>; /* PB18 periph A */ + <AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A */ + AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <1 19 0x1 0x0 /* PB19 periph A */ - 1 20 0x1 0x0 /* PB20 periph A */ - 1 21 0x1 0x0>; /* PB21 periph A */ + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB19 periph A */ + AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB20 periph A */ + AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB21 periph A */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 0 0x1 0x0 /* PA0 periph A SPI0_MISO pin */ - 0 1 0x1 0x0 /* PA1 periph A SPI0_MOSI pin */ - 0 2 0x1 0x0>; /* PA2 periph A SPI0_SPCK pin */ + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A SPI0_MISO pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A SPI0_MOSI pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A SPI1_MISO pin */ - 1 1 0x1 0x0 /* PB1 periph A SPI1_MOSI pin */ - 1 2 0x1 0x0>; /* PB2 periph A SPI1_SPCK pin */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A SPI1_MISO pin */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A SPI1_MOSI pin */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A SPI1_SPCK pin */ }; }; pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -353,7 +360,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -363,7 +370,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -374,7 +381,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -383,7 +390,7 @@ usart0: serial@fffb0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb0000 0x200>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -394,7 +401,7 @@ usart1: serial@fffb4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb4000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -405,7 +412,7 @@ usart2: serial@fffb8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb8000 0x200>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -416,7 +423,7 @@ usart3: serial@fffd0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd0000 0x200>; - interrupts = <23 4 5>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -427,7 +434,7 @@ uart0: serial@fffd4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd4000 0x200>; - interrupts = <24 4 5>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -438,7 +445,7 @@ uart1: serial@fffd8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd8000 0x200>; - interrupts = <25 4 5>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -449,7 +456,7 @@ macb0: ethernet@fffc4000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffc4000 0x100>; - interrupts = <21 4 3>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; @@ -458,14 +465,14 @@ usb1: gadget@fffa4000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfffa4000 0x4000>; - interrupts = <10 4 2>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; i2c0: i2c@fffac000 { compatible = "atmel,at91sam9260-i2c"; reg = <0xfffac000 0x100>; - interrupts = <11 4 6>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -474,7 +481,7 @@ mmc0: mmc@fffa8000 { compatible = "atmel,hsmci"; reg = <0xfffa8000 0x600>; - interrupts = <9 4 0>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -483,7 +490,7 @@ ssc0: ssc@fffbc000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffbc000 0x4000>; - interrupts = <14 4 5>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -494,7 +501,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffc8000 0x200>; - interrupts = <12 4 3>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -505,7 +512,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffcc000 0x200>; - interrupts = <13 4 3>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -514,7 +521,7 @@ adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; - interrupts = <5 4 0>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xf>; atmel,adc-vref = <3300>; @@ -567,8 +574,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioC 13 0 - &pioC 14 0 + gpios = <&pioC 13 GPIO_ACTIVE_HIGH + &pioC 14 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -577,15 +584,15 @@ usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; - interrupts = <20 4 2>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 23 0 /* sda */ - &pioA 24 0 /* scl */ + gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */ + &pioA 24 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 94b58ab2cc08..d9cf51a01b60 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -6,7 +6,10 @@ * Licensed under GPLv2 only. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9263 family SoC"; @@ -72,13 +75,13 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <19 4 0>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; }; rstc@fffffd00 { @@ -110,221 +113,221 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <2 30 0x1 0x0 /* PC30 periph A */ - 2 31 0x1 0x1>; /* PC31 periph with pullup */ + <AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC30 periph A */ + AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC31 periph with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <0 26 0x1 0x1 /* PA26 periph A with pullup */ - 0 27 0x1 0x0>; /* PA27 periph A */ + <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA26 periph A with pullup */ + AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA27 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <0 28 0x1 0x0>; /* PA28 periph A */ + <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA28 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <0 29 0x1 0x0>; /* PA29 periph A */ + <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA29 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <3 0 0x1 0x1 /* PD0 periph A with pullup */ - 3 1 0x1 0x0>; /* PD1 periph A */ + <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A with pullup */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD1 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <3 7 0x2 0x0>; /* PD7 periph B */ + <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD7 periph B */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <3 8 0x2 0x0>; /* PD8 periph B */ + <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD8 periph B */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <3 2 0x1 0x1 /* PD2 periph A with pullup */ - 3 3 0x1 0x0>; /* PD3 periph A */ + <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A with pullup */ + AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD3 periph A */ }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <3 5 0x2 0x0>; /* PD5 periph B */ + <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD5 periph B */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <4 6 0x2 0x0>; /* PD6 periph B */ + <AT91_PIOD 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD6 periph B */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <0 22 0x0 0x1 /* PA22 gpio RDY pin pull_up*/ - 3 15 0x0 0x1>; /* PD15 gpio enable pin pull_up */ + <AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PA22 gpio RDY pin pull_up*/ + AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD15 gpio enable pin pull_up */ }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = - <2 25 0x2 0x0 /* PC25 periph B */ - 4 21 0x1 0x0 /* PE21 periph A */ - 4 23 0x1 0x0 /* PE23 periph A */ - 4 24 0x1 0x0 /* PE24 periph A */ - 4 25 0x1 0x0 /* PE25 periph A */ - 4 26 0x1 0x0 /* PE26 periph A */ - 4 27 0x1 0x0 /* PE27 periph A */ - 4 28 0x1 0x0 /* PE28 periph A */ - 4 29 0x1 0x0 /* PE29 periph A */ - 4 30 0x1 0x0>; /* PE30 periph A */ + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC25 periph B */ + AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE21 periph A */ + AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE23 periph A */ + AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE24 periph A */ + AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE25 periph A */ + AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE26 periph A */ + AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE27 periph A */ + AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE28 periph A */ + AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE29 periph A */ + AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PE30 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = - <2 20 0x2 0x0 /* PC20 periph B */ - 2 21 0x2 0x0 /* PC21 periph B */ - 2 22 0x2 0x0 /* PC22 periph B */ - 2 23 0x2 0x0 /* PC23 periph B */ - 2 24 0x2 0x0 /* PC24 periph B */ - 2 25 0x2 0x0 /* PC25 periph B */ - 2 27 0x2 0x0 /* PC27 periph B */ - 4 22 0x2 0x0>; /* PE22 periph B */ + <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */ + AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */ + AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC22 periph B */ + AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC23 periph B */ + AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC24 periph B */ + AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC25 periph B */ + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */ + AT91_PIOE 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE22 periph B */ }; }; mmc0 { pinctrl_mmc0_clk: mmc0_clk-0 { atmel,pins = - <0 12 0x1 0x0>; /* PA12 periph A */ + <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA12 periph A */ }; pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { atmel,pins = - <0 1 0x1 0x1 /* PA1 periph A with pullup */ - 0 0 0x1 0x1>; /* PA0 periph A with pullup */ + <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */ + AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA0 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 3 0x1 0x1 /* PA3 periph A with pullup */ - 0 4 0x1 0x1 /* PA4 periph A with pullup */ - 0 5 0x1 0x1>; /* PA5 periph A with pullup */ + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA3 periph A with pullup */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA4 periph A with pullup */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA5 periph A with pullup */ }; pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { atmel,pins = - <0 16 0x1 0x1 /* PA16 periph A with pullup */ - 0 17 0x1 0x1>; /* PA17 periph A with pullup */ + <AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA17 periph A with pullup */ }; pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { atmel,pins = - <0 18 0x1 0x1 /* PA18 periph A with pullup */ - 0 19 0x1 0x1 /* PA19 periph A with pullup */ - 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */ }; }; mmc1 { pinctrl_mmc1_clk: mmc1_clk-0 { atmel,pins = - <0 6 0x1 0x0>; /* PA6 periph A */ + <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA6 periph A */ }; pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 { atmel,pins = - <0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 8 0x1 0x1>; /* PA8 periph A with pullup */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA8 periph A with pullup */ }; pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { atmel,pins = - <0 9 0x1 0x1 /* PA9 periph A with pullup */ - 0 10 0x1 0x1 /* PA10 periph A with pullup */ - 0 11 0x1 0x1>; /* PA11 periph A with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA9 periph A with pullup */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA10 periph A with pullup */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA11 periph A with pullup */ }; pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 { atmel,pins = - <0 21 0x1 0x1 /* PA21 periph A with pullup */ - 0 22 0x1 0x1>; /* PA22 periph A with pullup */ + <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA21 periph A with pullup */ + AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA22 periph A with pullup */ }; pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 { atmel,pins = - <0 23 0x1 0x1 /* PA23 periph A with pullup */ - 0 24 0x1 0x1 /* PA24 periph A with pullup */ - 0 25 0x1 0x1>; /* PA25 periph A with pullup */ + <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA23 periph A with pullup */ + AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA24 periph A with pullup */ + AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA25 periph A with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <1 0 0x2 0x0 /* PB0 periph B */ - 1 1 0x2 0x0 /* PB1 periph B */ - 1 2 0x2 0x0>; /* PB2 periph B */ + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB0 periph B */ + AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB1 periph B */ + AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB2 periph B */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <1 3 0x2 0x0 /* PB3 periph B */ - 1 4 0x2 0x0 /* PB4 periph B */ - 1 5 0x2 0x0>; /* PB5 periph B */ + <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB3 periph B */ + AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB4 periph B */ + AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB5 periph B */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx-0 { atmel,pins = - <1 6 0x1 0x0 /* PB6 periph A */ - 1 7 0x1 0x0 /* PB7 periph A */ - 1 8 0x1 0x0>; /* PB8 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */ }; pinctrl_ssc1_rx: ssc1_rx-0 { atmel,pins = - <1 9 0x1 0x0 /* PB9 periph A */ - 1 10 0x1 0x0 /* PB10 periph A */ - 1 11 0x1 0x0>; /* PB11 periph A */ + <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 0 0x2 0x0 /* PA0 periph B SPI0_MISO pin */ - 0 1 0x2 0x0 /* PA1 periph B SPI0_MOSI pin */ - 0 2 0x2 0x0>; /* PA2 periph B SPI0_SPCK pin */ + <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA0 periph B SPI0_MISO pin */ + AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA1 periph B SPI0_MOSI pin */ + AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA2 periph B SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <1 12 0x1 0x0 /* PB12 periph A SPI1_MISO pin */ - 1 13 0x1 0x0 /* PB13 periph A SPI1_MOSI pin */ - 1 14 0x1 0x0>; /* PB14 periph A SPI1_SPCK pin */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A SPI1_MISO pin */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A SPI1_MOSI pin */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A SPI1_SPCK pin */ }; }; pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -334,7 +337,7 @@ pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -344,7 +347,7 @@ pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -354,7 +357,7 @@ pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -364,7 +367,7 @@ pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -375,7 +378,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -384,7 +387,7 @@ usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -395,7 +398,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -406,7 +409,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 4 5>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -417,7 +420,7 @@ ssc0: ssc@fff98000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfff98000 0x4000>; - interrupts = <16 4 5>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -426,7 +429,7 @@ ssc1: ssc@fff9c000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfff9c000 0x4000>; - interrupts = <17 4 5>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; @@ -435,7 +438,7 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <21 4 3>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; @@ -444,14 +447,14 @@ usb1: gadget@fff78000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfff78000 0x4000>; - interrupts = <24 4 2>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; i2c0: i2c@fff88000 { compatible = "atmel,at91sam9263-i2c"; reg = <0xfff88000 0x100>; - interrupts = <13 4 6>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -460,7 +463,7 @@ mmc0: mmc@fff80000 { compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; - interrupts = <10 4 0>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -469,7 +472,7 @@ mmc1: mmc@fff84000 { compatible = "atmel,hsmci"; reg = <0xfff84000 0x600>; - interrupts = <11 4 0>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -486,7 +489,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffa4000 0x200>; - interrupts = <14 4 3>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -497,7 +500,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffa8000 0x200>; - interrupts = <15 4 3>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -515,8 +518,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioA 22 0 - &pioD 15 0 + gpios = <&pioA 22 GPIO_ACTIVE_HIGH + &pioD 15 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -525,15 +528,15 @@ usb0: ohci@00a00000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; - interrupts = <29 4 2>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioB 4 0 /* sda */ - &pioB 5 0 /* scl */ + gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ + &pioB 5 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 3b82d91e7fcc..eff1afb81304 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91sam9263.dtsi" +#include "at91sam9263.dtsi" / { model = "Atmel at91sam9263ek"; @@ -51,7 +51,7 @@ }; usb1: gadget@fff78000 { - atmel,vbus-gpio = <&pioA 25 0>; + atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -65,8 +65,8 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioE 18 0>; - wp-gpios = <&pioE 19 0>; + cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>; + wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>; }; }; @@ -74,8 +74,8 @@ mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = - <5 18 0x0 0x5 /* PE18 gpio CD pin pull up and deglitch */ - 5 19 0x0 0x1>; /* PE19 gpio WP pin pull up */ + <AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PE18 gpio CD pin pull up and deglitch */ + AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PE19 gpio WP pin pull up */ }; }; }; @@ -141,8 +141,8 @@ usb0: ohci@00a00000 { num-ports = <2>; status = "okay"; - atmel,vbus-gpio = <&pioA 24 0 - &pioA 21 0 + atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH + &pioA 21 GPIO_ACTIVE_HIGH >; }; }; @@ -152,13 +152,13 @@ d3 { label = "d3"; - gpios = <&pioB 7 0>; + gpios = <&pioB 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; d2 { label = "d2"; - gpios = <&pioC 29 1>; + gpios = <&pioC 29 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; }; @@ -168,14 +168,14 @@ left_click { label = "left_click"; - gpios = <&pioC 5 1>; + gpios = <&pioC 5 GPIO_ACTIVE_LOW>; linux,code = <272>; gpio-key,wakeup; }; right_click { label = "right_click"; - gpios = <&pioC 4 1>; + gpios = <&pioC 4 GPIO_ACTIVE_LOW>; linux,code = <273>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi index 28467fd6bf96..cfd7044616d7 100644 --- a/arch/arm/boot/dts/at91sam9g15.dtsi +++ b/arch/arm/boot/dts/at91sam9g15.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9G15 SoC"; diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts index 5427b2dba87e..26b0444b0f96 100644 --- a/arch/arm/boot/dts/at91sam9g15ek.dts +++ b/arch/arm/boot/dts/at91sam9g15ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g15.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9g15.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G15-EK"; diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 75ce6e760016..b8e79466014f 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9260.dtsi" +#include "at91sam9260.dtsi" / { model = "Atmel AT91SAM9G20 family SoC"; diff --git a/arch/arm/boot/dts/at91sam9g20ek.dts b/arch/arm/boot/dts/at91sam9g20ek.dts index e5324bf9d529..bbfd753112c9 100644 --- a/arch/arm/boot/dts/at91sam9g20ek.dts +++ b/arch/arm/boot/dts/at91sam9g20ek.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g20ek_common.dtsi" +#include "at91sam9g20ek_common.dtsi" / { model = "Atmel at91sam9g20ek"; @@ -17,13 +17,13 @@ ds1 { label = "ds1"; - gpios = <&pioA 9 0>; + gpios = <&pioA 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; ds5 { label = "ds5"; - gpios = <&pioA 6 1>; + gpios = <&pioA 6 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts index 66467b113126..bdb799bad179 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts +++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g20ek_common.dtsi" +#include "at91sam9g20ek_common.dtsi" / { model = "Atmel at91sam9g20ek 2 mmc"; @@ -23,7 +23,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioC 2 0>; + cd-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; }; }; @@ -31,7 +31,7 @@ mmc0_slot0 { pinctrl_board_mmc0_slot0: mmc0_slot0-board { atmel,pins = - <2 2 0x0 0x5>; /* PC2 gpio CD pin pull up and deglitch */ + <AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC2 gpio CD pin pull up and deglitch */ }; }; }; @@ -43,13 +43,13 @@ ds1 { label = "ds1"; - gpios = <&pioB 9 0>; + gpios = <&pioB 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; ds5 { label = "ds5"; - gpios = <&pioB 8 1>; + gpios = <&pioB 8 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 6a92c5baef8c..c7ffc32918f9 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -5,7 +5,7 @@ * * Licensed under GPLv2. */ -/include/ "at91sam9g20.dtsi" +#include "at91sam9g20.dtsi" / { @@ -34,10 +34,17 @@ board { pinctrl_pck0_as_mck: pck0_as_mck { atmel,pins = - <2 1 0x2 0x0>; /* PC1 periph B */ + <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC1 periph B */ }; }; + + mmc0_slot1 { + pinctrl_board_mmc0_slot1: mmc0_slot1-board { + atmel,pins = + <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC9 gpio CD pin pull up and deglitch */ + }; + }; }; dbgu: serial@fffff200 { @@ -65,7 +72,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -79,16 +86,7 @@ slot@1 { reg = <1>; bus-width = <4>; - cd-gpios = <&pioC 9 0>; - }; - }; - - pinctrl@fffff400 { - mmc0_slot1 { - pinctrl_board_mmc0_slot1: mmc0_slot1-board { - atmel,pins = - <2 9 0x0 0x5>; /* PC9 gpio CD pin pull up and deglitch */ - }; + cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>; }; }; @@ -180,14 +178,14 @@ btn3 { label = "Button 3"; - gpios = <&pioA 30 1>; + gpios = <&pioA 30 GPIO_ACTIVE_LOW>; linux,code = <0x103>; gpio-key,wakeup; }; btn4 { label = "Button 4"; - gpios = <&pioA 31 1>; + gpios = <&pioA 31 GPIO_ACTIVE_LOW>; linux,code = <0x104>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi index 5fd32df03f25..b4ec6fe53fc7 100644 --- a/arch/arm/boot/dts/at91sam9g25.dtsi +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9G25 SoC"; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index a1c511fecdc1..1e4c49c584d3 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g25.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9g25.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G25-EK"; diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi index d6fa8af50724..bebf9f55614b 100644 --- a/arch/arm/boot/dts/at91sam9g35.dtsi +++ b/arch/arm/boot/dts/at91sam9g35.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9G35 SoC"; diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts index 6f58ab8d21f5..641a9bf89ed1 100644 --- a/arch/arm/boot/dts/at91sam9g35ek.dts +++ b/arch/arm/boot/dts/at91sam9g35ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g35.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9g35.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G35-EK"; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index bf18a735c37d..f0091af6c285 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -9,7 +9,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9G45 family SoC"; @@ -83,7 +86,7 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; @@ -95,19 +98,19 @@ tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <18 4 0>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@fffd4000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffd4000 0x100>; - interrupts = <18 4 0>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <21 4 0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -130,221 +133,221 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <1 12 0x1 0x0 /* PB12 periph A */ - 1 13 0x1 0x0>; /* PB13 periph A */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <1 19 0x1 0x1 /* PB19 periph A with pullup */ - 1 18 0x1 0x0>; /* PB18 periph A */ + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB19 periph A with pullup */ + AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <1 17 0x2 0x0>; /* PB17 periph B */ + <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB17 periph B */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <1 15 0x2 0x0>; /* PB15 periph B */ + <AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B */ }; }; uart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <1 4 0x1 0x1 /* PB4 periph A with pullup */ - 1 5 0x1 0x0>; /* PB5 periph A */ + <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB4 periph A with pullup */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <3 16 0x1 0x0>; /* PD16 periph A */ + <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD16 periph A */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <3 17 0x1 0x0>; /* PD17 periph A */ + <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD17 periph A */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <1 6 0x1 0x1 /* PB6 periph A with pullup */ - 1 7 0x1 0x0>; /* PB7 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB6 periph A with pullup */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A */ }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <2 9 0x2 0x0>; /* PC9 periph B */ + <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC9 periph B */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <2 11 0x2 0x0>; /* PC11 periph B */ + <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC11 periph B */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <1 8 0x1 0x1 /* PB9 periph A with pullup */ - 1 9 0x1 0x0>; /* PB8 periph A */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB9 periph A with pullup */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <0 23 0x2 0x0>; /* PA23 periph B */ + <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <0 24 0x2 0x0>; /* PA24 periph B */ + <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA24 periph B */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <2 8 0x0 0x1 /* PC8 gpio RDY pin pull_up*/ - 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + <AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC8 gpio RDY pin pull_up*/ + AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */ }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = - <0 10 0x1 0x0 /* PA10 periph A */ - 0 11 0x1 0x0 /* PA11 periph A */ - 0 12 0x1 0x0 /* PA12 periph A */ - 0 13 0x1 0x0 /* PA13 periph A */ - 0 14 0x1 0x0 /* PA14 periph A */ - 0 15 0x1 0x0 /* PA15 periph A */ - 0 16 0x1 0x0 /* PA16 periph A */ - 0 17 0x1 0x0 /* PA17 periph A */ - 0 18 0x1 0x0 /* PA18 periph A */ - 0 19 0x1 0x0>; /* PA19 periph A */ + <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA16 periph A */ + AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA18 periph A */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA19 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = - <0 6 0x2 0x0 /* PA6 periph B */ - 0 7 0x2 0x0 /* PA7 periph B */ - 0 8 0x2 0x0 /* PA8 periph B */ - 0 9 0x2 0x0 /* PA9 periph B */ - 0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0 /* PA29 periph B */ - 0 30 0x2 0x0>; /* PA30 periph B */ + <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA6 periph B */ + AT91_PIOA 7 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA7 periph B */ + AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA8 periph B */ + AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA9 periph B */ + AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA29 periph B */ + AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */ }; }; mmc0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 0 0x1 0x0 /* PA0 periph A */ - 0 1 0x1 0x1 /* PA1 periph A with pullup */ - 0 2 0x1 0x1>; /* PA2 periph A with pullup */ + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA2 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 3 0x1 0x1 /* PA3 periph A with pullup */ - 0 4 0x1 0x1 /* PA4 periph A with pullup */ - 0 5 0x1 0x1>; /* PA5 periph A with pullup */ + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA3 periph A with pullup */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA4 periph A with pullup */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA5 periph A with pullup */ }; pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { atmel,pins = - <0 6 0x1 0x1 /* PA6 periph A with pullup */ - 0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 8 0x1 0x1 /* PA8 periph A with pullup */ - 0 9 0x1 0x1>; /* PA9 periph A with pullup */ + <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA6 periph A with pullup */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA8 periph A with pullup */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA9 periph A with pullup */ }; }; mmc1 { pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 31 0x1 0x0 /* PA31 periph A */ - 0 22 0x1 0x1 /* PA22 periph A with pullup */ - 0 23 0x1 0x1>; /* PA23 periph A with pullup */ + <AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA31 periph A */ + AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA22 periph A with pullup */ + AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA23 periph A with pullup */ }; pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { atmel,pins = - <0 24 0x1 0x1 /* PA24 periph A with pullup */ - 0 25 0x1 0x1 /* PA25 periph A with pullup */ - 0 26 0x1 0x1>; /* PA26 periph A with pullup */ + <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA24 periph A with pullup */ + AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA25 periph A with pullup */ + AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA26 periph A with pullup */ }; pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 { atmel,pins = - <0 27 0x1 0x1 /* PA27 periph A with pullup */ - 0 28 0x1 0x1 /* PA28 periph A with pullup */ - 0 29 0x1 0x1 /* PA29 periph A with pullup */ - 0 20 0x1 0x1>; /* PA30 periph A with pullup */ + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA27 periph A with pullup */ + AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA28 periph A with pullup */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA29 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA30 periph A with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <3 0 0x1 0x0 /* PD0 periph A */ - 3 1 0x1 0x0 /* PD1 periph A */ - 3 2 0x1 0x0>; /* PD2 periph A */ + <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A */ + AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD2 periph A */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <3 3 0x1 0x0 /* PD3 periph A */ - 3 4 0x1 0x0 /* PD4 periph A */ - 3 5 0x1 0x0>; /* PD5 periph A */ + <AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A */ + AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD4 periph A */ + AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD5 periph A */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx-0 { atmel,pins = - <3 10 0x1 0x0 /* PD10 periph A */ - 3 11 0x1 0x0 /* PD11 periph A */ - 3 12 0x1 0x0>; /* PD12 periph A */ + <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A */ + AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A */ + AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD12 periph A */ }; pinctrl_ssc1_rx: ssc1_rx-0 { atmel,pins = - <3 13 0x1 0x0 /* PD13 periph A */ - 3 14 0x1 0x0 /* PD14 periph A */ - 3 15 0x1 0x0>; /* PD15 periph A */ + <AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD13 periph A */ + AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD14 periph A */ + AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD15 periph A */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A SPI0_MISO pin */ - 1 1 0x1 0x0 /* PB1 periph A SPI0_MOSI pin */ - 1 2 0x1 0x0>; /* PB2 periph A SPI0_SPCK pin */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A SPI0_MISO pin */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A SPI0_MOSI pin */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB2 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <1 14 0x1 0x0 /* PB14 periph A SPI1_MISO pin */ - 1 15 0x1 0x0 /* PB15 periph A SPI1_MOSI pin */ - 1 16 0x1 0x0>; /* PB16 periph A SPI1_SPCK pin */ + <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A SPI1_MISO pin */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A SPI1_MOSI pin */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB16 periph A SPI1_SPCK pin */ }; }; pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -354,7 +357,7 @@ pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -364,7 +367,7 @@ pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <4 4 1>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -374,7 +377,7 @@ pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <5 4 1>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -384,7 +387,7 @@ pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <5 4 1>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -395,7 +398,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -404,7 +407,7 @@ usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -415,7 +418,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -426,7 +429,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 4 5>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -437,7 +440,7 @@ usart3: serial@fff98000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff98000 0x200>; - interrupts = <10 4 5>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; @@ -448,7 +451,7 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <25 4 3>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; @@ -457,7 +460,7 @@ i2c0: i2c@fff84000 { compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff84000 0x100>; - interrupts = <12 4 6>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -466,7 +469,7 @@ i2c1: i2c@fff88000 { compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff88000 0x100>; - interrupts = <13 4 6>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -475,7 +478,7 @@ ssc0: ssc@fff9c000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfff9c000 0x4000>; - interrupts = <16 4 5>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -484,7 +487,7 @@ ssc1: ssc@fffa0000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfffa0000 0x4000>; - interrupts = <17 4 5>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; @@ -493,7 +496,7 @@ adc0: adc@fffb0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffb0000 0x100>; - interrupts = <20 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; @@ -533,7 +536,7 @@ mmc0: mmc@fff80000 { compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; - interrupts = <11 4 0>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 0>; dma-names = "rxtx"; #address-cells = <1>; @@ -544,7 +547,7 @@ mmc1: mmc@fffd0000 { compatible = "atmel,hsmci"; reg = <0xfffd0000 0x600>; - interrupts = <29 4 0>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 13>; dma-names = "rxtx"; #address-cells = <1>; @@ -592,8 +595,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioC 8 0 - &pioC 14 0 + gpios = <&pioC 8 GPIO_ACTIVE_HIGH + &pioC 14 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -602,22 +605,22 @@ usb0: ohci@00700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; usb1: ehci@00800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 20 0 /* sda */ - &pioA 21 0 /* scl */ + gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */ + &pioA 21 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 51d9251b5bbe..89c50d108d44 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g45.dtsi" +#include "at91sam9g45.dtsi" / { model = "Atmel AT91SAM9M10G45-EK"; @@ -68,7 +68,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 10 0>; + cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>; }; }; @@ -81,8 +81,8 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 11 0>; - wp-gpios = <&pioD 29 0>; + cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>; + wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>; }; }; @@ -90,15 +90,15 @@ mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = - <3 10 0x0 0x5>; /* PD10 gpio CD pin pull up and deglitch */ + <AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD10 gpio CD pin pull up and deglitch */ }; }; mmc1 { pinctrl_board_mmc1: mmc1-board { atmel,pins = - <3 11 0x0 0x5 /* PD11 gpio CD pin pull up and deglitch */ - 3 29 0x0 0x1>; /* PD29 gpio WP pin pull up */ + <AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PD11 gpio CD pin pull up and deglitch */ + AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD29 gpio WP pin pull up */ }; }; }; @@ -139,8 +139,8 @@ usb0: ohci@00700000 { status = "okay"; num-ports = <2>; - atmel,vbus-gpio = <&pioD 1 1 - &pioD 3 1>; + atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW + &pioD 3 GPIO_ACTIVE_LOW>; }; usb1: ehci@00800000 { @@ -153,19 +153,19 @@ d8 { label = "d8"; - gpios = <&pioD 30 0>; + gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; d6 { label = "d6"; - gpios = <&pioD 0 1>; + gpios = <&pioD 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; d7 { label = "d7"; - gpios = <&pioD 31 1>; + gpios = <&pioD 31 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; }; @@ -175,45 +175,45 @@ left_click { label = "left_click"; - gpios = <&pioB 6 1>; + gpios = <&pioB 6 GPIO_ACTIVE_LOW>; linux,code = <272>; gpio-key,wakeup; }; right_click { label = "right_click"; - gpios = <&pioB 7 1>; + gpios = <&pioB 7 GPIO_ACTIVE_LOW>; linux,code = <273>; gpio-key,wakeup; }; left { label = "Joystick Left"; - gpios = <&pioB 14 1>; + gpios = <&pioB 14 GPIO_ACTIVE_LOW>; linux,code = <105>; }; right { label = "Joystick Right"; - gpios = <&pioB 15 1>; + gpios = <&pioB 15 GPIO_ACTIVE_LOW>; linux,code = <106>; }; up { label = "Joystick Up"; - gpios = <&pioB 16 1>; + gpios = <&pioB 16 GPIO_ACTIVE_LOW>; linux,code = <103>; }; down { label = "Joystick Down"; - gpios = <&pioB 17 1>; + gpios = <&pioB 17 GPIO_ACTIVE_LOW>; linux,code = <108>; }; enter { label = "Joystick Press"; - gpios = <&pioB 18 1>; + gpios = <&pioB 18 GPIO_ACTIVE_LOW>; linux,code = <28>; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 3de8e6dfbcb1..d864f7a9d2e0 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -7,7 +7,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9N12 SoC"; @@ -57,6 +60,7 @@ compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; }; ramc0: ramc@ffffe800 { @@ -77,7 +81,7 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; shdwc@fffffe10 { @@ -88,7 +92,7 @@ mmc0: mmc@f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; - interrupts = <12 4 0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 0>; dma-names = "rxtx"; #address-cells = <1>; @@ -99,19 +103,19 @@ tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -133,159 +137,159 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <0 9 0x1 0x0 /* PA9 periph A */ - 0 10 0x1 0x1>; /* PA10 periph with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA10 periph with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <0 1 0x1 0x1 /* PA1 periph A with pullup */ - 0 0 0x1 0x0>; /* PA0 periph A */ + <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */ + AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA0 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <0 2 0x1 0x0>; /* PA2 periph A */ + <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <0 3 0x1 0x0>; /* PA3 periph A */ + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA3 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <0 6 0x1 0x1 /* PA6 periph A with pullup */ - 0 5 0x1 0x0>; /* PA5 periph A */ + <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA6 periph A with pullup */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA5 periph A */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <0 8 0x1 0x1 /* PA8 periph A with pullup */ - 0 7 0x1 0x0>; /* PA7 periph A */ + <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA8 periph A with pullup */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA7 periph A */ }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <1 0 0x2 0x0>; /* PB0 periph B */ + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <1 1 0x2 0x0>; /* PB1 periph B */ + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <2 23 0x2 0x1 /* PC23 periph B with pullup */ - 2 22 0x2 0x0>; /* PC22 periph B */ + <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC23 periph B with pullup */ + AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC22 periph B */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <2 24 0x2 0x0>; /* PC24 periph B */ + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <2 25 0x2 0x0>; /* PC25 periph B */ + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <2 9 0x3 0x1 /* PC9 periph C with pullup */ - 2 8 0x3 0x0>; /* PC8 periph C */ + <AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* PC9 periph C with pullup */ + AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC8 periph C */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <2 16 0x3 0x1 /* PC17 periph C with pullup */ - 2 17 0x3 0x0>; /* PC16 periph C */ + <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* PC17 periph C with pullup */ + AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC16 periph C */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <3 5 0x0 0x1 /* PD5 gpio RDY pin pull_up*/ - 3 4 0x0 0x1>; /* PD4 gpio enable pin pull_up */ + <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD5 gpio RDY pin pull_up*/ + AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD4 gpio enable pin pull_up */ }; }; mmc0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 17 0x1 0x0 /* PA17 periph A */ - 0 16 0x1 0x1 /* PA16 periph A with pullup */ - 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA15 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 18 0x1 0x1 /* PA18 periph A with pullup */ - 0 19 0x1 0x1 /* PA19 periph A with pullup */ - 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */ }; pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { atmel,pins = - <0 11 0x2 0x1 /* PA11 periph B with pullup */ - 0 12 0x2 0x1 /* PA12 periph B with pullup */ - 0 13 0x2 0x1 /* PA13 periph B with pullup */ - 0 14 0x2 0x1>; /* PA14 periph B with pullup */ + <AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA11 periph B with pullup */ + AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA12 periph B with pullup */ + AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA13 periph B with pullup */ + AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA14 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <0 24 0x2 0x0 /* PA24 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0>; /* PA26 periph B */ + <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */ - 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */ - 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */ + <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A SPI0_MISO pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A SPI0_MOSI pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */ - 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */ - 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */ + <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA21 periph B SPI1_MISO pin */ + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B SPI1_MOSI pin */ + AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */ }; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -295,7 +299,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -305,7 +309,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -315,7 +319,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -326,7 +330,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -335,7 +339,7 @@ ssc0: ssc@f0010000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; - interrupts = <28 4 5>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -344,7 +348,7 @@ usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; - interrupts = <5 4 5>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; @@ -353,7 +357,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x4000>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; @@ -362,7 +366,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x4000>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; @@ -371,7 +375,7 @@ usart3: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x4000>; - interrupts = <8 4 5>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; @@ -380,7 +384,7 @@ i2c0: i2c@f8010000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; - interrupts = <9 4 6>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma 1 13>, <&dma 1 14>; dma-names = "tx", "rx"; @@ -392,7 +396,7 @@ i2c1: i2c@f8014000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8014000 0x100>; - interrupts = <10 4 6>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma 1 15>, <&dma 1 16>; dma-names = "tx", "rx"; @@ -406,7 +410,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0000000 0x100>; - interrupts = <13 4 3>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -417,7 +421,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0004000 0x100>; - interrupts = <14 4 3>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -438,8 +442,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioD 5 0 - &pioD 4 0 + gpios = <&pioD 5 GPIO_ACTIVE_HIGH + &pioD 4 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -448,15 +452,15 @@ usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 30 0 /* sda */ - &pioA 31 0 /* scl */ + gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ + &pioA 31 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index d30e48bd1e9d..2e67cd5e47eb 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9n12.dtsi" +#include "at91sam9n12.dtsi" / { model = "Atmel AT91SAM9N12-EK"; @@ -55,7 +55,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioA 7 0>; + cd-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>; }; }; @@ -63,7 +63,7 @@ mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = - <0 7 0x0 0x5>; /* PA7 gpio CD pin pull up and deglitch */ + <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PA7 gpio CD pin pull up and deglitch */ }; }; }; @@ -95,19 +95,19 @@ d8 { label = "d8"; - gpios = <&pioB 4 1>; + gpios = <&pioB 4 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; d9 { label = "d6"; - gpios = <&pioB 5 1>; + gpios = <&pioB 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; d10 { label = "d7"; - gpios = <&pioB 6 0>; + gpios = <&pioB 6 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; @@ -117,7 +117,7 @@ enter { label = "Enter"; - gpios = <&pioB 4 1>; + gpios = <&pioB 4 GPIO_ACTIVE_LOW>; linux,code = <28>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi index 9ac2bc2b4f07..49e94aba938f 100644 --- a/arch/arm/boot/dts/at91sam9x25.dtsi +++ b/arch/arm/boot/dts/at91sam9x25.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9X25 SoC"; @@ -26,16 +26,16 @@ macb1 { pinctrl_macb1_rmii: macb1_rmii-0 { atmel,pins = - <2 16 0x2 0x0 /* PC16 periph B */ - 2 18 0x2 0x0 /* PC18 periph B */ - 2 19 0x2 0x0 /* PC19 periph B */ - 2 20 0x2 0x0 /* PC20 periph B */ - 2 21 0x2 0x0 /* PC21 periph B */ - 2 27 0x2 0x0 /* PC27 periph B */ - 2 28 0x2 0x0 /* PC28 periph B */ - 2 29 0x2 0x0 /* PC29 periph B */ - 2 30 0x2 0x0 /* PC30 periph B */ - 2 31 0x2 0x0>; /* PC31 periph B */ + <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */ + AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */ + AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */ + AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */ + AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */ + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */ + AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */ + AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */ + AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */ + AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */ }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts index 3b40d11d65e7..494864836e83 100644 --- a/arch/arm/boot/dts/at91sam9x25ek.dts +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -7,11 +7,11 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9x25.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9x25.dtsi" +#include "at91sam9x5ek.dtsi" / { - model = "Atmel AT91SAM9G25-EK"; + model = "Atmel AT91SAM9X25-EK"; compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; ahb { diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi index ba67d83d17ac..1a3d525a1f5d 100644 --- a/arch/arm/boot/dts/at91sam9x35.dtsi +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ -/include/ "at91sam9x5.dtsi" +#include "at91sam9x5.dtsi" / { model = "Atmel AT91SAM9X35 SoC"; diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts index 6ad19a0d5424..343d32818ca3 100644 --- a/arch/arm/boot/dts/at91sam9x35ek.dts +++ b/arch/arm/boot/dts/at91sam9x35ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9x35.dtsi" -/include/ "at91sam9x5ek.dtsi" +#include "at91sam9x35.dtsi" +#include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9X35-EK"; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 1145ac330fb7..af91599488e9 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -9,7 +9,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel AT91SAM9x5 family SoC"; @@ -85,32 +88,32 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; }; dma0: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; dma1: dma-controller@ffffee00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffee00 0x200>; - interrupts = <21 4 0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -124,297 +127,297 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <0 9 0x1 0x0 /* PA9 periph A */ - 0 10 0x1 0x1>; /* PA10 periph A with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA10 periph A with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <0 0 0x1 0x1 /* PA0 periph A with pullup */ - 0 1 0x1 0x0>; /* PA1 periph A */ + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA0 periph A with pullup */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA1 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <0 2 0x1 0x0>; /* PA2 periph A */ + <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <0 3 0x1 0x0>; /* PA3 periph A */ + <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA3 periph A */ }; pinctrl_usart0_sck: usart0_sck-0 { atmel,pins = - <0 4 0x1 0x0>; /* PA4 periph A */ + <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA4 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <0 5 0x1 0x1 /* PA5 periph A with pullup */ - 0 6 0x1 0x0>; /* PA6 periph A */ + <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA5 periph A with pullup */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA6 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <2 27 0x3 0x0>; /* PC27 periph C */ + <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC27 periph C */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <2 28 0x3 0x0>; /* PC28 periph C */ + <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C */ }; pinctrl_usart1_sck: usart1_sck-0 { atmel,pins = - <2 28 0x3 0x0>; /* PC29 periph C */ + <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 8 0x1 0x0>; /* PA8 periph A */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */ }; pinctrl_uart2_rts: uart2_rts-0 { atmel,pins = - <1 0 0x2 0x0>; /* PB0 periph B */ + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ }; pinctrl_uart2_cts: uart2_cts-0 { atmel,pins = - <1 1 0x2 0x0>; /* PB1 periph B */ + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ }; pinctrl_usart2_sck: usart2_sck-0 { atmel,pins = - <1 2 0x2 0x0>; /* PB2 periph B */ + <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB2 periph B */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <2 22 0x2 0x1 /* PC22 periph B with pullup */ - 2 23 0x2 0x0>; /* PC23 periph B */ + <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */ + AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */ }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <2 24 0x2 0x0>; /* PC24 periph B */ + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <2 25 0x2 0x0>; /* PC25 periph B */ + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */ }; pinctrl_usart3_sck: usart3_sck-0 { atmel,pins = - <2 26 0x2 0x0>; /* PC26 periph B */ + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <2 8 0x3 0x0 /* PC8 periph C */ - 2 9 0x3 0x1>; /* PC9 periph C with pullup */ + <AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC8 periph C */ + AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; /* PC9 periph C with pullup */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <2 16 0x3 0x0 /* PC16 periph C */ - 2 17 0x3 0x1>; /* PC17 periph C with pullup */ + <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC16 periph C */ + AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; /* PC17 periph C with pullup */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <3 0 0x1 0x0 /* PD0 periph A Read Enable */ - 3 1 0x1 0x0 /* PD1 periph A Write Enable */ - 3 2 0x1 0x0 /* PD2 periph A Address Latch Enable */ - 3 3 0x1 0x0 /* PD3 periph A Command Latch Enable */ - 3 4 0x0 0x1 /* PD4 gpio Chip Enable pin pull_up */ - 3 5 0x0 0x1 /* PD5 gpio RDY/BUSY pin pull_up */ - 3 6 0x1 0x0 /* PD6 periph A Data bit 0 */ - 3 7 0x1 0x0 /* PD7 periph A Data bit 1 */ - 3 8 0x1 0x0 /* PD8 periph A Data bit 2 */ - 3 9 0x1 0x0 /* PD9 periph A Data bit 3 */ - 3 10 0x1 0x0 /* PD10 periph A Data bit 4 */ - 3 11 0x1 0x0 /* PD11 periph A Data bit 5 */ - 3 12 0x1 0x0 /* PD12 periph A Data bit 6 */ - 3 13 0x1 0x0>; /* PD13 periph A Data bit 7 */ + <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A Read Enable */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A Write Enable */ + AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD2 periph A Address Latch Enable */ + AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A Command Latch Enable */ + AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD4 gpio Chip Enable pin pull_up */ + AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD5 gpio RDY/BUSY pin pull_up */ + AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD6 periph A Data bit 0 */ + AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD7 periph A Data bit 1 */ + AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD8 periph A Data bit 2 */ + AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A Data bit 3 */ + AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A Data bit 4 */ + AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A Data bit 5 */ + AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD12 periph A Data bit 6 */ + AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD13 periph A Data bit 7 */ }; pinctrl_nand_16bits: nand_16bits-0 { atmel,pins = - <3 14 0x1 0x0 /* PD14 periph A Data bit 8 */ - 3 15 0x1 0x0 /* PD15 periph A Data bit 9 */ - 3 16 0x1 0x0 /* PD16 periph A Data bit 10 */ - 3 17 0x1 0x0 /* PD17 periph A Data bit 11 */ - 3 18 0x1 0x0 /* PD18 periph A Data bit 12 */ - 3 19 0x1 0x0 /* PD19 periph A Data bit 13 */ - 3 20 0x1 0x0 /* PD20 periph A Data bit 14 */ - 3 21 0x1 0x0>; /* PD21 periph A Data bit 15 */ + <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD14 periph A Data bit 8 */ + AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD15 periph A Data bit 9 */ + AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD16 periph A Data bit 10 */ + AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD17 periph A Data bit 11 */ + AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD18 periph A Data bit 12 */ + AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD19 periph A Data bit 13 */ + AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD20 periph A Data bit 14 */ + AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A Data bit 15 */ }; }; macb0 { pinctrl_macb0_rmii: macb0_rmii-0 { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A */ - 1 1 0x1 0x0 /* PB1 periph A */ - 1 2 0x1 0x0 /* PB2 periph A */ - 1 3 0x1 0x0 /* PB3 periph A */ - 1 4 0x1 0x0 /* PB4 periph A */ - 1 5 0x1 0x0 /* PB5 periph A */ - 1 6 0x1 0x0 /* PB6 periph A */ - 1 7 0x1 0x0 /* PB7 periph A */ - 1 9 0x1 0x0 /* PB9 periph A */ - 1 10 0x1 0x0>; /* PB10 periph A */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */ + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */ + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */ }; pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { atmel,pins = - <1 8 0x1 0x0 /* PB8 periph A */ - 1 11 0x1 0x0 /* PB11 periph A */ - 1 12 0x1 0x0 /* PB12 periph A */ - 1 13 0x1 0x0 /* PB13 periph A */ - 1 14 0x1 0x0 /* PB14 periph A */ - 1 15 0x1 0x0 /* PB15 periph A */ - 1 16 0x1 0x0 /* PB16 periph A */ - 1 17 0x1 0x0>; /* PB17 periph A */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */ + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */ }; }; mmc0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 17 0x1 0x0 /* PA17 periph A */ - 0 16 0x1 0x1 /* PA16 periph A with pullup */ - 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ + AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA15 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 18 0x1 0x1 /* PA18 periph A with pullup */ - 0 19 0x1 0x1 /* PA19 periph A with pullup */ - 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */ + AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */ }; }; mmc1 { pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 13 0x2 0x0 /* PA13 periph B */ - 0 12 0x2 0x1 /* PA12 periph B with pullup */ - 0 11 0x2 0x1>; /* PA11 periph B with pullup */ + <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA13 periph B */ + AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA12 periph B with pullup */ + AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA11 periph B with pullup */ }; pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { atmel,pins = - <0 2 0x2 0x1 /* PA2 periph B with pullup */ - 0 3 0x2 0x1 /* PA3 periph B with pullup */ - 0 4 0x2 0x1>; /* PA4 periph B with pullup */ + <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA2 periph B with pullup */ + AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA3 periph B with pullup */ + AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA4 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <0 24 0x2 0x0 /* PA24 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0>; /* PA26 periph B */ + <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */ + AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ + AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ + AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ + AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */ - 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */ - 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */ + <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A SPI0_MISO pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A SPI0_MOSI pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */ - 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */ - 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */ + <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA21 periph B SPI1_MISO pin */ + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B SPI1_MOSI pin */ + AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */ }; }; i2c0 { pinctrl_i2c0: i2c0-0 { atmel,pins = - <0 30 0x1 0x0 /* PA30 periph A I2C0 data */ - 0 31 0x1 0x0>; /* PA31 periph A I2C0 clock */ + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A I2C0 data */ + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A I2C0 clock */ }; }; i2c1 { pinctrl_i2c1: i2c1-0 { atmel,pins = - <2 0 0x3 0x0 /* PC0 periph C I2C1 data */ - 2 1 0x3 0x0>; /* PC1 periph C I2C1 clock */ + <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC0 periph C I2C1 data */ + AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC1 periph C I2C1 clock */ }; }; i2c2 { pinctrl_i2c2: i2c2-0 { atmel,pins = - <1 4 0x2 0x0 /* PB4 periph B I2C2 data */ - 1 5 0x2 0x0>; /* PB5 periph B I2C2 clock */ + <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB4 periph B I2C2 data */ + AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB5 periph B I2C2 clock */ }; }; i2c_gpio0 { pinctrl_i2c_gpio0: i2c_gpio0-0 { atmel,pins = - <0 30 0x0 0x2 /* PA30 gpio multidrive I2C0 data */ - 0 31 0x0 0x2>; /* PA31 gpio multidrive I2C0 clock */ + <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA30 gpio multidrive I2C0 data */ + AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PA31 gpio multidrive I2C0 clock */ }; }; i2c_gpio1 { pinctrl_i2c_gpio1: i2c_gpio1-0 { atmel,pins = - <2 0 0x0 0x2 /* PC0 gpio multidrive I2C1 data */ - 2 1 0x0 0x2>; /* PC1 gpio multidrive I2C1 clock */ + <AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PC0 gpio multidrive I2C1 data */ + AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PC1 gpio multidrive I2C1 clock */ }; }; i2c_gpio2 { pinctrl_i2c_gpio2: i2c_gpio2-0 { atmel,pins = - <1 4 0x0 0x2 /* PB4 gpio multidrive I2C2 data */ - 1 5 0x0 0x2>; /* PB5 gpio multidrive I2C2 clock */ + <AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PB4 gpio multidrive I2C2 data */ + AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB5 gpio multidrive I2C2 clock */ }; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -424,7 +427,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; #gpio-lines = <19>; @@ -435,7 +438,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -445,7 +448,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; #gpio-lines = <22>; @@ -457,7 +460,7 @@ ssc0: ssc@f0010000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; - interrupts = <28 4 5>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -466,7 +469,7 @@ mmc0: mmc@f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; - interrupts = <12 4 0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma0 1 0>; dma-names = "rxtx"; #address-cells = <1>; @@ -477,7 +480,7 @@ mmc1: mmc@f000c000 { compatible = "atmel,hsmci"; reg = <0xf000c000 0x600>; - interrupts = <26 4 0>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 1 0>; dma-names = "rxtx"; #address-cells = <1>; @@ -488,7 +491,7 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -497,7 +500,7 @@ usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x200>; - interrupts = <5 4 5>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; @@ -506,7 +509,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x200>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; @@ -515,7 +518,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; @@ -524,7 +527,7 @@ macb0: ethernet@f802c000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; - interrupts = <24 4 3>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_rmii>; status = "disabled"; @@ -533,14 +536,14 @@ macb1: ethernet@f8030000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf8030000 0x100>; - interrupts = <27 4 3>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; status = "disabled"; }; i2c0: i2c@f8010000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; - interrupts = <9 4 6>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma0 1 7>, <&dma0 1 8>; dma-names = "tx", "rx"; @@ -554,7 +557,7 @@ i2c1: i2c@f8014000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8014000 0x100>; - interrupts = <10 4 6>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma1 1 5>, <&dma1 1 6>; dma-names = "tx", "rx"; @@ -568,7 +571,7 @@ i2c2: i2c@f8018000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8018000 0x100>; - interrupts = <11 4 6>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma0 1 9>, <&dma0 1 10>; dma-names = "tx", "rx"; @@ -582,7 +585,7 @@ adc0: adc@f804c000 { compatible = "atmel,at91sam9260-adc"; reg = <0xf804c000 0x100>; - interrupts = <19 4 0>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; atmel,adc-use-external; atmel,adc-channels-used = <0xffff>; atmel,adc-vref = <3300>; @@ -625,7 +628,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0000000 0x100>; - interrupts = <13 4 3>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -636,7 +639,7 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0004000 0x100>; - interrupts = <14 4 3>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -645,7 +648,7 @@ rtc@fffffeb0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffeb0 0x40>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; status = "disabled"; }; }; @@ -664,8 +667,8 @@ atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioD 5 0 - &pioD 4 0 + gpios = <&pioD 5 GPIO_ACTIVE_HIGH + &pioD 4 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -674,22 +677,22 @@ usb0: ohci@00600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; usb1: ehci@00700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 30 0 /* sda */ - &pioA 31 0 /* scl */ + gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ + &pioA 31 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; @@ -703,8 +706,8 @@ i2c@1 { compatible = "i2c-gpio"; - gpios = <&pioC 0 0 /* sda */ - &pioC 1 0 /* scl */ + gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */ + &pioC 1 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; @@ -718,8 +721,8 @@ i2c@2 { compatible = "i2c-gpio"; - gpios = <&pioB 4 0 /* sda */ - &pioB 5 0 /* scl */ + gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ + &pioB 5 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 347a74a857f6..4a5ee5cc115a 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -28,7 +28,7 @@ pinctrl@fffff400 { 1wire_cm { pinctrl_1wire_cm: 1wire_cm-0 { - atmel,pins = <1 18 0x0 0x2>; /* PB18 multidrive, conflicts with led */ + atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */ }; }; }; @@ -75,19 +75,19 @@ pb18 { label = "pb18"; - gpios = <&pioB 18 1>; + gpios = <&pioB 18 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; pd21 { label = "pd21"; - gpios = <&pioD 21 0>; + gpios = <&pioD 21 GPIO_ACTIVE_HIGH>; }; }; 1wire_cm { compatible = "w1-gpio"; - gpios = <&pioB 18 0>; + gpios = <&pioB 18 GPIO_ACTIVE_HIGH>; linux,open-drain; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_1wire_cm>; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 1fa48d2bfd80..19c8ebb303f4 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -6,7 +6,7 @@ * * Licensed under GPLv2 or later. */ -/include/ "at91sam9x5cm.dtsi" +#include "at91sam9x5cm.dtsi" / { model = "Atmel AT91SAM9X5-EK"; @@ -27,7 +27,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 15 0>; + cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; }; }; @@ -40,7 +40,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 14 0>; + cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>; }; }; @@ -60,14 +60,14 @@ mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = - <3 15 0x0 0x5>; /* PD15 gpio CD pin pull up and deglitch */ + <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */ }; }; mmc1 { pinctrl_board_mmc1: mmc1-board { atmel,pins = - <3 14 0x0 0x5>; /* PD14 gpio CD pin pull up and deglitch */ + <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */ }; }; }; @@ -86,8 +86,8 @@ usb0: ohci@00600000 { status = "okay"; num-ports = <2>; - atmel,vbus-gpio = <&pioD 19 1 - &pioD 20 1 + atmel,vbus-gpio = <&pioD 19 GPIO_ACTIVE_LOW + &pioD 20 GPIO_ACTIVE_LOW >; }; diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts index 1ea9d34460a4..143b6d25bc80 100644 --- a/arch/arm/boot/dts/ethernut5.dts +++ b/arch/arm/boot/dts/ethernut5.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9260.dtsi" +#include "at91sam9260.dtsi" / { model = "Ethernut 5"; @@ -40,7 +40,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; @@ -52,7 +52,7 @@ status = "okay"; gpios = <0 - &pioC 14 0 + &pioC 14 GPIO_ACTIVE_HIGH 0 >; diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts index 96e50f569433..4d829685fdfb 100644 --- a/arch/arm/boot/dts/evk-pro3.dts +++ b/arch/arm/boot/dts/evk-pro3.dts @@ -9,7 +9,7 @@ /dts-v1/; -/include/ "ge863-pro3.dtsi" +#include "ge863-pro3.dtsi" / { model = "Telit EVK-PRO3 for Telit GE863-PRO3"; @@ -31,7 +31,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -50,4 +50,4 @@ status = "okay"; }; -};
\ No newline at end of file +}; diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi index 17136fc7a516..230099bb31c8 100644 --- a/arch/arm/boot/dts/ge863-pro3.dtsi +++ b/arch/arm/boot/dts/ge863-pro3.dtsi @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ -/include/ "at91sam9260.dtsi" +#include "at91sam9260.dtsi" / { clocks { diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts index b4dc3ed9a3ec..02df1914a47c 100644 --- a/arch/arm/boot/dts/kizbox.dts +++ b/arch/arm/boot/dts/kizbox.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g20.dtsi" +#include "at91sam9g20.dtsi" / { @@ -94,26 +94,26 @@ led1g { label = "led1:green"; - gpios = <&pioB 0 1>; + gpios = <&pioB 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; led1r { label = "led1:red"; - gpios = <&pioB 1 1>; + gpios = <&pioB 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; led2g { label = "led2:green"; - gpios = <&pioB 2 1>; + gpios = <&pioB 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; default-state = "on"; }; led2r { label = "led2:red"; - gpios = <&pioB 3 1>; + gpios = <&pioB 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "none"; }; }; @@ -125,16 +125,16 @@ reset { label = "reset"; - gpios = <&pioB 30 1>; + gpios = <&pioB 30 GPIO_ACTIVE_LOW>; linux,code = <0x100>; gpio-key,wakeup; }; mode { label = "mode"; - gpios = <&pioB 31 1>; + gpios = <&pioB 31 GPIO_ACTIVE_LOW>; linux,code = <0x101>; gpio-key,wakeup; }; }; -};
\ No newline at end of file +}; diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts index 317300875f34..ccf9ea242f72 100644 --- a/arch/arm/boot/dts/mpa1600.dts +++ b/arch/arm/boot/dts/mpa1600.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91rm9200.dtsi" +#include "at91rm9200.dtsi" / { model = "Phontech MPA 1600"; @@ -62,7 +62,7 @@ monitor_mute { label = "Monitor mute"; - gpios = <&pioC 1 1>; + gpios = <&pioC 1 GPIO_ACTIVE_LOW>; linux,code = <113>; }; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 82a404da1c0d..99ba6e14ebf3 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -516,7 +516,7 @@ usb_otg_hs: usb_otg_hs@480ab000 { compatible = "ti,omap3-musb"; reg = <0x480ab000 0x1000>; - interrupts = <0 92 0x4>, <0 93 0x4>; + interrupts = <92>, <93>; interrupt-names = "mc", "dma"; ti,hwmods = "usb_otg_hs"; multipoint = <1>; diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts index 387fedb58988..33ffabe9c4c8 100644 --- a/arch/arm/boot/dts/pm9g45.dts +++ b/arch/arm/boot/dts/pm9g45.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g45.dtsi" +#include "at91sam9g45.dtsi" / { model = "Ronetix pm9g45"; @@ -42,15 +42,15 @@ board { pinctrl_board_nand: nand0-board { atmel,pins = - <3 3 0x0 0x1 /* PD3 gpio RDY pin pull_up*/ - 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + <AT91_PIOD 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD3 gpio RDY pin pull_up*/ + AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PC14 gpio enable pin pull_up */ }; }; mmc { pinctrl_board_mmc: mmc0-board { atmel,pins = - <3 6 0x0 0x5>; /* PD6 gpio CD pin pull_up and deglitch */ + <AT91_PIOD 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD6 gpio CD pin pull_up and deglitch */ }; }; }; @@ -64,7 +64,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 6 0>; + cd-gpios = <&pioD 6 GPIO_ACTIVE_HIGH>; }; }; @@ -81,8 +81,8 @@ nand-on-flash-bbt; pinctrl-0 = <&pinctrl_board_nand>; - gpios = <&pioD 3 0 - &pioC 14 0 + gpios = <&pioD 3 GPIO_ACTIVE_HIGH + &pioC 14 GPIO_ACTIVE_HIGH 0 >; @@ -134,13 +134,13 @@ led0 { label = "led0"; - gpios = <&pioD 0 1>; + gpios = <&pioD 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; led1 { label = "led1"; - gpios = <&pioD 31 0>; + gpios = <&pioD 31 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; @@ -152,13 +152,13 @@ right { label = "SW4"; - gpios = <&pioE 7 1>; + gpios = <&pioE 7 GPIO_ACTIVE_LOW>; linux,code = <106>; }; up { label = "SW3"; - gpios = <&pioE 8 1>; + gpios = <&pioE 8 GPIO_ACTIVE_LOW>; linux,code = <103>; }; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 2e643ea51cce..d5922935523f 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -8,7 +8,10 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel SAMA5D3 family SoC"; @@ -59,7 +62,7 @@ mmc0: mmc@f0000000 { compatible = "atmel,hsmci"; reg = <0xf0000000 0x600>; - interrupts = <21 4 0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma0 2 0>; dma-names = "rxtx"; pinctrl-names = "default"; @@ -74,12 +77,7 @@ #size-cells = <0>; compatible = "atmel,at91sam9x5-spi"; reg = <0xf0004000 0x100>; - interrupts = <24 4 3>; - cs-gpios = <&pioD 13 0 - &pioD 14 0 /* conflicts with SCK0 and CANRX0 */ - &pioD 15 0 /* conflicts with CTS0 and CANTX0 */ - &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */ - >; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -88,7 +86,7 @@ ssc0: ssc@f0008000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0008000 0x4000>; - interrupts = <38 4 4>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; status = "disabled"; @@ -97,7 +95,7 @@ can0: can@f000c000 { compatible = "atmel,at91sam9x5-can"; reg = <0xf000c000 0x300>; - interrupts = <40 4 3>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can0_rx_tx>; status = "disabled"; @@ -106,13 +104,13 @@ tcb0: timer@f0010000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf0010000 0x100>; - interrupts = <26 4 0>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; }; i2c0: i2c@f0014000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf0014000 0x4000>; - interrupts = <18 4 6>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma0 2 7>, <&dma0 2 8>; dma-names = "tx", "rx"; @@ -126,7 +124,7 @@ i2c1: i2c@f0018000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf0018000 0x4000>; - interrupts = <19 4 6>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma0 2 9>, <&dma0 2 10>; dma-names = "tx", "rx"; @@ -140,7 +138,7 @@ usart0: serial@f001c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf001c000 0x100>; - interrupts = <12 4 5>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; @@ -149,16 +147,16 @@ usart1: serial@f0020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf0020000 0x100>; - interrupts = <13 4 5>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; macb0: ethernet@f0028000 { - compatible = "cnds,pc302-gem", "cdns,gem"; + compatible = "cdns,pc302-gem", "cdns,gem"; reg = <0xf0028000 0x100>; - interrupts = <34 4 3>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>; status = "disabled"; @@ -167,14 +165,14 @@ isi: isi@f0034000 { compatible = "atmel,at91sam9g45-isi"; reg = <0xf0034000 0x4000>; - interrupts = <37 4 5>; + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>; status = "disabled"; }; mmc1: mmc@f8000000 { compatible = "atmel,hsmci"; reg = <0xf8000000 0x600>; - interrupts = <22 4 0>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 2 0>; dma-names = "rxtx"; pinctrl-names = "default"; @@ -187,7 +185,7 @@ mmc2: mmc@f8004000 { compatible = "atmel,hsmci"; reg = <0xf8004000 0x600>; - interrupts = <23 4 0>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 2 1>; dma-names = "rxtx"; pinctrl-names = "default"; @@ -202,12 +200,7 @@ #size-cells = <0>; compatible = "atmel,at91sam9x5-spi"; reg = <0xf8008000 0x100>; - interrupts = <25 4 3>; - cs-gpios = <&pioC 25 0 - &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */ - &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */ - &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */ - >; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -216,7 +209,7 @@ ssc1: ssc@f800c000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf800c000 0x4000>; - interrupts = <39 4 4>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; status = "disabled"; @@ -225,7 +218,7 @@ can1: can@f8010000 { compatible = "atmel,at91sam9x5-can"; reg = <0xf8010000 0x300>; - interrupts = <41 4 3>; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1_rx_tx>; }; @@ -233,13 +226,13 @@ tcb1: timer@f8014000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8014000 0x100>; - interrupts = <27 4 0>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; }; adc0: adc@f8018000 { compatible = "atmel,at91sam9260-adc"; reg = <0xf8018000 0x100>; - interrupts = <29 4 5>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = < &pinctrl_adc0_adtrg @@ -293,7 +286,7 @@ tsadcc: tsadcc@f8018000 { compatible = "atmel,at91sam9x5-tsadcc"; reg = <0xf8018000 0x4000>; - interrupts = <29 4 5>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; atmel,tsadcc_clock = <300000>; atmel,filtering_average = <0x03>; atmel,pendet_debounce = <0x08>; @@ -305,7 +298,7 @@ i2c2: i2c@f801c000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf801c000 0x4000>; - interrupts = <20 4 6>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma1 2 11>, <&dma1 2 12>; dma-names = "tx", "rx"; @@ -317,7 +310,7 @@ usart2: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; - interrupts = <14 4 5>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; @@ -326,7 +319,7 @@ usart3: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x100>; - interrupts = <15 4 5>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; @@ -335,7 +328,7 @@ macb1: ethernet@f802c000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; - interrupts = <35 4 3>; + interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb1_rmii>; status = "disabled"; @@ -344,7 +337,7 @@ sha@f8034000 { compatible = "atmel,sam9g46-sha"; reg = <0xf8034000 0x100>; - interrupts = <42 4 0>; + interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; }; aes@f8038000 { @@ -356,20 +349,20 @@ tdes@f803c000 { compatible = "atmel,sam9g46-tdes"; reg = <0xf803c000 0x100>; - interrupts = <44 4 0>; + interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; }; dma0: dma-controller@ffffe600 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffe600 0x200>; - interrupts = <30 4 0>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; dma1: dma-controller@ffffe800 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffe800 0x200>; - interrupts = <31 4 0>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; }; @@ -381,7 +374,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <2 4 7>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; @@ -413,202 +406,202 @@ adc0 { pinctrl_adc0_adtrg: adc0_adtrg { atmel,pins = - <3 19 0x1 0x0>; /* PD19 periph A ADTRG */ + <AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD19 periph A ADTRG */ }; pinctrl_adc0_ad0: adc0_ad0 { atmel,pins = - <3 20 0x1 0x0>; /* PD20 periph A AD0 */ + <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD20 periph A AD0 */ }; pinctrl_adc0_ad1: adc0_ad1 { atmel,pins = - <3 21 0x1 0x0>; /* PD21 periph A AD1 */ + <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A AD1 */ }; pinctrl_adc0_ad2: adc0_ad2 { atmel,pins = - <3 22 0x1 0x0>; /* PD22 periph A AD2 */ + <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD22 periph A AD2 */ }; pinctrl_adc0_ad3: adc0_ad3 { atmel,pins = - <3 23 0x1 0x0>; /* PD23 periph A AD3 */ + <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD23 periph A AD3 */ }; pinctrl_adc0_ad4: adc0_ad4 { atmel,pins = - <3 24 0x1 0x0>; /* PD24 periph A AD4 */ + <AT91_PIOD 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD24 periph A AD4 */ }; pinctrl_adc0_ad5: adc0_ad5 { atmel,pins = - <3 25 0x1 0x0>; /* PD25 periph A AD5 */ + <AT91_PIOD 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD25 periph A AD5 */ }; pinctrl_adc0_ad6: adc0_ad6 { atmel,pins = - <3 26 0x1 0x0>; /* PD26 periph A AD6 */ + <AT91_PIOD 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD26 periph A AD6 */ }; pinctrl_adc0_ad7: adc0_ad7 { atmel,pins = - <3 27 0x1 0x0>; /* PD27 periph A AD7 */ + <AT91_PIOD 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD27 periph A AD7 */ }; pinctrl_adc0_ad8: adc0_ad8 { atmel,pins = - <3 28 0x1 0x0>; /* PD28 periph A AD8 */ + <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD28 periph A AD8 */ }; pinctrl_adc0_ad9: adc0_ad9 { atmel,pins = - <3 29 0x1 0x0>; /* PD29 periph A AD9 */ + <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD29 periph A AD9 */ }; pinctrl_adc0_ad10: adc0_ad10 { atmel,pins = - <3 30 0x1 0x0>; /* PD30 periph A AD10, conflicts with PCK0 */ + <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD30 periph A AD10, conflicts with PCK0 */ }; pinctrl_adc0_ad11: adc0_ad11 { atmel,pins = - <3 31 0x1 0x0>; /* PD31 periph A AD11, conflicts with PCK1 */ + <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD31 periph A AD11, conflicts with PCK1 */ }; }; can0 { pinctrl_can0_rx_tx: can0_rx_tx { atmel,pins = - <3 14 0x3 0x0 /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */ - 3 15 0x3 0x0>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */ + <AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */ + AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */ }; }; can1 { pinctrl_can1_rx_tx: can1_rx_tx { atmel,pins = - <1 14 0x2 0x0 /* PB14 periph B RX, conflicts with GCRS */ - 1 15 0x2 0x0>; /* PB15 periph B TX, conflicts with GCOL */ + <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B RX, conflicts with GCRS */ + AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B TX, conflicts with GCOL */ }; }; dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <1 30 0x1 0x0 /* PB30 periph A */ - 1 31 0x1 0x1>; /* PB31 periph A with pullup */ + <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB30 periph A */ + AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB31 periph A with pullup */ }; }; i2c0 { pinctrl_i2c0: i2c0-0 { atmel,pins = - <0 30 0x1 0x0 /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */ - 0 31 0x1 0x0>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */ + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */ + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */ }; }; i2c1 { pinctrl_i2c1: i2c1-0 { atmel,pins = - <2 26 0x2 0x0 /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */ - 2 27 0x2 0x0>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */ + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */ + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */ }; }; isi { pinctrl_isi: isi-0 { atmel,pins = - <0 16 0x3 0x0 /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */ - 0 17 0x3 0x0 /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */ - 0 18 0x3 0x0 /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */ - 0 19 0x3 0x0 /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */ - 0 20 0x3 0x0 /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */ - 0 21 0x3 0x0 /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */ - 0 22 0x3 0x0 /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */ - 0 23 0x3 0x0 /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */ - 2 30 0x3 0x0 /* PC30 periph C ISI_PCK, conflicts with UTXD0 */ - 0 31 0x3 0x0 /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */ - 0 30 0x3 0x0 /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */ - 2 29 0x3 0x0 /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */ - 2 28 0x3 0x0>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */ + <AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */ + AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */ + AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */ + AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */ + AT91_PIOA 20 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */ + AT91_PIOA 21 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */ + AT91_PIOA 22 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */ + AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */ + AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC30 periph C ISI_PCK, conflicts with UTXD0 */ + AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */ + AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */ + AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */ + AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */ }; pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 { atmel,pins = - <3 31 0x2 0x0>; /* PD31 periph B ISI_MCK */ + <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD31 periph B ISI_MCK */ }; }; lcd { pinctrl_lcd: lcd-0 { atmel,pins = - <0 24 0x1 0x0 /* PA24 periph A LCDPWM */ - 0 26 0x1 0x0 /* PA26 periph A LCDVSYNC */ - 0 27 0x1 0x0 /* PA27 periph A LCDHSYNC */ - 0 25 0x1 0x0 /* PA25 periph A LCDDISP */ - 0 29 0x1 0x0 /* PA29 periph A LCDDEN */ - 0 28 0x1 0x0 /* PA28 periph A LCDPCK */ - 0 0 0x1 0x0 /* PA0 periph A LCDD0 pin */ - 0 1 0x1 0x0 /* PA1 periph A LCDD1 pin */ - 0 2 0x1 0x0 /* PA2 periph A LCDD2 pin */ - 0 3 0x1 0x0 /* PA3 periph A LCDD3 pin */ - 0 4 0x1 0x0 /* PA4 periph A LCDD4 pin */ - 0 5 0x1 0x0 /* PA5 periph A LCDD5 pin */ - 0 6 0x1 0x0 /* PA6 periph A LCDD6 pin */ - 0 7 0x1 0x0 /* PA7 periph A LCDD7 pin */ - 0 8 0x1 0x0 /* PA8 periph A LCDD8 pin */ - 0 9 0x1 0x0 /* PA9 periph A LCDD9 pin */ - 0 10 0x1 0x0 /* PA10 periph A LCDD10 pin */ - 0 11 0x1 0x0 /* PA11 periph A LCDD11 pin */ - 0 12 0x1 0x0 /* PA12 periph A LCDD12 pin */ - 0 13 0x1 0x0 /* PA13 periph A LCDD13 pin */ - 0 14 0x1 0x0 /* PA14 periph A LCDD14 pin */ - 0 15 0x1 0x0 /* PA15 periph A LCDD15 pin */ - 2 14 0x3 0x0 /* PC14 periph C LCDD16 pin */ - 2 13 0x3 0x0 /* PC13 periph C LCDD17 pin */ - 2 12 0x3 0x0 /* PC12 periph C LCDD18 pin */ - 2 11 0x3 0x0 /* PC11 periph C LCDD19 pin */ - 2 10 0x3 0x0 /* PC10 periph C LCDD20 pin */ - 2 15 0x3 0x0 /* PC15 periph C LCDD21 pin */ - 4 27 0x3 0x0 /* PE27 periph C LCDD22 pin */ - 4 28 0x3 0x0>; /* PE28 periph C LCDD23 pin */ + <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA24 periph A LCDPWM */ + AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA26 periph A LCDVSYNC */ + AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA27 periph A LCDHSYNC */ + AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA25 periph A LCDDISP */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA29 periph A LCDDEN */ + AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA28 periph A LCDPCK */ + AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA2 periph A LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA3 periph A LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA4 periph A LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA5 periph A LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA6 periph A LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA7 periph A LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA8 periph A LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A LCDD15 pin */ + AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC14 periph C LCDD16 pin */ + AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC13 periph C LCDD17 pin */ + AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC12 periph C LCDD18 pin */ + AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC11 periph C LCDD19 pin */ + AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC10 periph C LCDD20 pin */ + AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC15 periph C LCDD21 pin */ + AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* PE27 periph C LCDD22 pin */ + AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PE28 periph C LCDD23 pin */ }; }; macb0 { pinctrl_macb0_data_rgmii: macb0_data_rgmii { atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A GTX0, conflicts with PWMH0 */ - 1 1 0x1 0x0 /* PB1 periph A GTX1, conflicts with PWML0 */ - 1 2 0x1 0x0 /* PB2 periph A GTX2, conflicts with TK1 */ - 1 3 0x1 0x0 /* PB3 periph A GTX3, conflicts with TF1 */ - 1 4 0x1 0x0 /* PB4 periph A GRX0, conflicts with PWMH1 */ - 1 5 0x1 0x0 /* PB5 periph A GRX1, conflicts with PWML1 */ - 1 6 0x1 0x0 /* PB6 periph A GRX2, conflicts with TD1 */ - 1 7 0x1 0x0>; /* PB7 periph A GRX3, conflicts with RK1 */ + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A GTX0, conflicts with PWMH0 */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A GTX1, conflicts with PWML0 */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A GTX2, conflicts with TK1 */ + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A GTX3, conflicts with TF1 */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A GRX0, conflicts with PWMH1 */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A GRX1, conflicts with PWML1 */ + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A GRX2, conflicts with TD1 */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A GRX3, conflicts with RK1 */ }; pinctrl_macb0_data_gmii: macb0_data_gmii { atmel,pins = - <1 19 0x2 0x0 /* PB19 periph B GTX4, conflicts with MCI1_CDA */ - 1 20 0x2 0x0 /* PB20 periph B GTX5, conflicts with MCI1_DA0 */ - 1 21 0x2 0x0 /* PB21 periph B GTX6, conflicts with MCI1_DA1 */ - 1 22 0x2 0x0 /* PB22 periph B GTX7, conflicts with MCI1_DA2 */ - 1 23 0x2 0x0 /* PB23 periph B GRX4, conflicts with MCI1_DA3 */ - 1 24 0x2 0x0 /* PB24 periph B GRX5, conflicts with MCI1_CK */ - 1 25 0x2 0x0 /* PB25 periph B GRX6, conflicts with SCK1 */ - 1 26 0x2 0x0>; /* PB26 periph B GRX7, conflicts with CTS1 */ + <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB19 periph B GTX4, conflicts with MCI1_CDA */ + AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB20 periph B GTX5, conflicts with MCI1_DA0 */ + AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB21 periph B GTX6, conflicts with MCI1_DA1 */ + AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB22 periph B GTX7, conflicts with MCI1_DA2 */ + AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB23 periph B GRX4, conflicts with MCI1_DA3 */ + AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB24 periph B GRX5, conflicts with MCI1_CK */ + AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB25 periph B GRX6, conflicts with SCK1 */ + AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB26 periph B GRX7, conflicts with CTS1 */ }; pinctrl_macb0_signal_rgmii: macb0_signal_rgmii { atmel,pins = - <1 8 0x1 0x0 /* PB8 periph A GTXCK, conflicts with PWMH2 */ - 1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */ - 1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */ - 1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */ - 1 16 0x1 0x0 /* PB16 periph A GMDC */ - 1 17 0x1 0x0 /* PB17 periph A GMDIO */ - 1 18 0x1 0x0>; /* PB18 periph A G125CK */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A GTXCK, conflicts with PWMH2 */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */ + AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A G125CK */ }; pinctrl_macb0_signal_gmii: macb0_signal_gmii { atmel,pins = - <1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */ - 1 10 0x1 0x0 /* PB10 periph A GTXER, conflicts with RF1 */ - 1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */ - 1 12 0x1 0x0 /* PB12 periph A GRXDV, conflicts with PWMH3 */ - 1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */ - 1 14 0x1 0x0 /* PB14 periph A GCRS, conflicts with CANRX1 */ - 1 15 0x1 0x0 /* PB15 periph A GCOL, conflicts with CANTX1 */ - 1 16 0x1 0x0 /* PB16 periph A GMDC */ - 1 17 0x1 0x0 /* PB17 periph A GMDIO */ - 1 27 0x2 0x0>; /* PB27 periph B G125CKO */ + <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A GTXER, conflicts with RF1 */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */ + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A GRXDV, conflicts with PWMH3 */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A GCRS, conflicts with CANRX1 */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A GCOL, conflicts with CANTX1 */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */ + AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB27 periph B G125CKO */ }; }; @@ -616,252 +609,251 @@ macb1 { pinctrl_macb1_rmii: macb1_rmii-0 { atmel,pins = - <2 0 0x1 0x0 /* PC0 periph A ETX0, conflicts with TIOA3 */ - 2 1 0x1 0x0 /* PC1 periph A ETX1, conflicts with TIOB3 */ - 2 2 0x1 0x0 /* PC2 periph A ERX0, conflicts with TCLK3 */ - 2 3 0x1 0x0 /* PC3 periph A ERX1, conflicts with TIOA4 */ - 2 4 0x1 0x0 /* PC4 periph A ETXEN, conflicts with TIOB4 */ - 2 5 0x1 0x0 /* PC5 periph A ECRSDV,conflicts with TCLK4 */ - 2 6 0x1 0x0 /* PC6 periph A ERXER, conflicts with TIOA5 */ - 2 7 0x1 0x0 /* PC7 periph A EREFCK, conflicts with TIOB5 */ - 2 8 0x1 0x0 /* PC8 periph A EMDC, conflicts with TCLK5 */ - 2 9 0x1 0x0>; /* PC9 periph A EMDIO */ + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC0 periph A ETX0, conflicts with TIOA3 */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC1 periph A ETX1, conflicts with TIOB3 */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC2 periph A ERX0, conflicts with TCLK3 */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC3 periph A ERX1, conflicts with TIOA4 */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC4 periph A ETXEN, conflicts with TIOB4 */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC5 periph A ECRSDV,conflicts with TCLK4 */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 periph A ERXER, conflicts with TIOA5 */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 periph A EREFCK, conflicts with TIOB5 */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A EMDC, conflicts with TCLK5 */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC9 periph A EMDIO */ }; }; mmc0 { pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 { atmel,pins = - <3 9 0x1 0x0 /* PD9 periph A MCI0_CK */ - 3 0 0x1 0x1 /* PD0 periph A MCI0_CDA with pullup */ - 3 1 0x1 0x1>; /* PD1 periph A MCI0_DA0 with pullup */ + <AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A MCI0_CK */ + AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A MCI0_CDA with pullup */ + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD1 periph A MCI0_DA0 with pullup */ }; pinctrl_mmc0_dat1_3: mmc0_dat1_3 { atmel,pins = - <3 2 0x1 0x1 /* PD2 periph A MCI0_DA1 with pullup */ - 3 3 0x1 0x1 /* PD3 periph A MCI0_DA2 with pullup */ - 3 4 0x1 0x1>; /* PD4 periph A MCI0_DA3 with pullup */ + <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A MCI0_DA1 with pullup */ + AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD3 periph A MCI0_DA2 with pullup */ + AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD4 periph A MCI0_DA3 with pullup */ }; pinctrl_mmc0_dat4_7: mmc0_dat4_7 { atmel,pins = - <3 5 0x1 0x1 /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */ - 3 6 0x1 0x1 /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */ - 3 7 0x1 0x1 /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */ - 3 8 0x1 0x1>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */ + <AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */ + AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */ + AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */ + AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */ }; }; mmc1 { pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 { atmel,pins = - <1 24 0x1 0x0 /* PB24 periph A MCI1_CK, conflicts with GRX5 */ - 1 19 0x1 0x1 /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */ - 1 20 0x1 0x1>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */ + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB24 periph A MCI1_CK, conflicts with GRX5 */ + AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */ + AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */ }; pinctrl_mmc1_dat1_3: mmc1_dat1_3 { atmel,pins = - <1 21 0x1 0x1 /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */ - 1 22 0x1 0x1 /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */ - 1 23 0x1 0x1>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */ + <AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */ + AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */ + AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */ }; }; mmc2 { pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 { atmel,pins = - <2 15 0x1 0x0 /* PC15 periph A MCI2_CK, conflicts with PCK2 */ - 2 10 0x1 0x1 /* PC10 periph A MCI2_CDA with pullup */ - 2 11 0x1 0x1>; /* PC11 periph A MCI2_DA0 with pullup */ + <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC15 periph A MCI2_CK, conflicts with PCK2 */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC10 periph A MCI2_CDA with pullup */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC11 periph A MCI2_DA0 with pullup */ }; pinctrl_mmc2_dat1_3: mmc2_dat1_3 { atmel,pins = - <2 12 0x1 0x0 /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ - 2 13 0x1 0x0 /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ - 2 14 0x1 0x0>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ + <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ }; }; nand0 { pinctrl_nand0_ale_cle: nand0_ale_cle-0 { atmel,pins = - <4 21 0x1 0x1 /* PE21 periph A with pullup */ - 4 22 0x1 0x1>; /* PE22 periph A with pullup */ + <AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PE21 periph A with pullup */ + AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PE22 periph A with pullup */ }; }; - pioA: gpio@fffff200 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff200 0x100>; - interrupts = <6 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pioB: gpio@fffff400 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <7 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pioC: gpio@fffff600 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <8 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pioD: gpio@fffff800 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <9 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pioE: gpio@fffffa00 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <10 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <3 10 0x1 0x0 /* PD10 periph A SPI0_MISO pin */ - 3 11 0x1 0x0 /* PD11 periph A SPI0_MOSI pin */ - 3 12 0x1 0x0 /* PD12 periph A SPI0_SPCK pin */ - 3 13 0x0 0x0>; /* PD13 GPIO SPI0_NPCS0 pin */ + <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A SPI0_MISO pin */ + AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A SPI0_MOSI pin */ + AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD12 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <2 22 0x1 0x0 /* PC22 periph A SPI1_MISO pin */ - 2 23 0x1 0x0 /* PC23 periph A SPI1_MOSI pin */ - 2 24 0x1 0x0 /* PC24 periph A SPI1_SPCK pin */ - 2 25 0x0 0x0>; /* PC25 GPIO SPI1_NPCS0 pin */ + <AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC22 periph A SPI1_MISO pin */ + AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC23 periph A SPI1_MOSI pin */ + AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC24 periph A SPI1_SPCK pin */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx { atmel,pins = - <2 16 0x1 0x0 /* PC16 periph A TK0 */ - 2 17 0x1 0x0 /* PC17 periph A TF0 */ - 2 18 0x1 0x0>; /* PC18 periph A TD0 */ + <AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC16 periph A TK0 */ + AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC17 periph A TF0 */ + AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC18 periph A TD0 */ }; pinctrl_ssc0_rx: ssc0_rx { atmel,pins = - <2 19 0x1 0x0 /* PC19 periph A RK0 */ - 2 20 0x1 0x0 /* PC20 periph A RF0 */ - 2 21 0x1 0x0>; /* PC21 periph A RD0 */ + <AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC19 periph A RK0 */ + AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC20 periph A RF0 */ + AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC21 periph A RD0 */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx { atmel,pins = - <1 2 0x2 0x0 /* PB2 periph B TK1, conflicts with GTX2 */ - 1 3 0x2 0x0 /* PB3 periph B TF1, conflicts with GTX3 */ - 1 6 0x2 0x0>; /* PB6 periph B TD1, conflicts with TD1 */ + <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB2 periph B TK1, conflicts with GTX2 */ + AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB3 periph B TF1, conflicts with GTX3 */ + AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB6 periph B TD1, conflicts with TD1 */ }; pinctrl_ssc1_rx: ssc1_rx { atmel,pins = - <1 7 0x2 0x0 /* PB7 periph B RK1, conflicts with EREFCK */ - 1 10 0x2 0x0 /* PB10 periph B RF1, conflicts with GTXER */ - 1 11 0x2 0x0>; /* PB11 periph B RD1, conflicts with GRXCK */ + <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB7 periph B RK1, conflicts with EREFCK */ + AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB10 periph B RF1, conflicts with GTXER */ + AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB11 periph B RD1, conflicts with GRXCK */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <2 29 0x1 0x0 /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */ - 2 30 0x1 0x1>; /* PC30 periph A with pullup, conflicts with ISI_PCK */ + <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */ + AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC30 periph A with pullup, conflicts with ISI_PCK */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <0 30 0x2 0x0 /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */ - 0 31 0x2 0x1>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */ + <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */ + AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <3 17 0x1 0x0 /* PD17 periph A */ - 3 18 0x1 0x1>; /* PD18 periph A with pullup */ + <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD17 periph A */ + AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD18 periph A with pullup */ }; pinctrl_usart0_rts_cts: usart0_rts_cts-0 { atmel,pins = - <3 15 0x1 0x0 /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */ - 3 16 0x1 0x0>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */ + <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */ + AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <1 28 0x1 0x0 /* PB28 periph A */ - 1 29 0x1 0x1>; /* PB29 periph A with pullup */ + <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB28 periph A */ + AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB29 periph A with pullup */ }; pinctrl_usart1_rts_cts: usart1_rts_cts-0 { atmel,pins = - <1 26 0x1 0x0 /* PB26 periph A, conflicts with GRX7 */ - 1 27 0x1 0x0>; /* PB27 periph A, conflicts with G125CKO */ + <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB26 periph A, conflicts with GRX7 */ + AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB27 periph A, conflicts with G125CKO */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <4 25 0x2 0x0 /* PE25 periph B, conflicts with A25 */ - 4 26 0x2 0x1>; /* PE26 periph B with pullup, conflicts NCS0 */ + <AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE25 periph B, conflicts with A25 */ + AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PE26 periph B with pullup, conflicts NCS0 */ }; pinctrl_usart2_rts_cts: usart2_rts_cts-0 { atmel,pins = - <4 23 0x2 0x0 /* PE23 periph B, conflicts with A23 */ - 4 24 0x2 0x0>; /* PE24 periph B, conflicts with A24 */ + <AT91_PIOE 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE23 periph B, conflicts with A23 */ + AT91_PIOE 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE24 periph B, conflicts with A24 */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <4 18 0x2 0x0 /* PE18 periph B, conflicts with A18 */ - 4 19 0x2 0x1>; /* PE19 periph B with pullup, conflicts with A19 */ + <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE18 periph B, conflicts with A18 */ + AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PE19 periph B with pullup, conflicts with A19 */ }; pinctrl_usart3_rts_cts: usart3_rts_cts-0 { atmel,pins = - <4 16 0x2 0x0 /* PE16 periph B, conflicts with A16 */ - 4 17 0x2 0x0>; /* PE17 periph B, conflicts with A17 */ + <AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE16 periph B, conflicts with A16 */ + AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE17 periph B, conflicts with A17 */ }; }; + + + pioA: gpio@fffff200 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x100>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x100>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x100>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x100>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x100>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; pmc: pmc@fffffc00 { @@ -877,7 +869,7 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <3 4 5>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; }; watchdog@fffffe40 { @@ -889,7 +881,7 @@ rtc@fffffeb0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffeb0 0x30>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; }; @@ -899,7 +891,7 @@ compatible = "atmel,at91sam9rl-udc"; reg = <0x00500000 0x100000 0xf8030000 0x4000>; - interrupts = <33 4 2>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; ep0 { @@ -1011,14 +1003,14 @@ usb1: ohci@00600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; - interrupts = <32 4 2>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; usb2: ehci@00700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; - interrupts = <32 4 2>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; status = "disabled"; }; @@ -1034,7 +1026,7 @@ 0xffffc000 0x00000070 /* NFC HSMC regs */ 0x00200000 0x00100000 /* NFC SRAM banks */ >; - interrupts = <5 4 6>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts index fa5d216f1db7..027bac7510b6 100644 --- a/arch/arm/boot/dts/sama5d31ek.dts +++ b/arch/arm/boot/dts/sama5d31ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "sama5d3xmb.dtsi" -/include/ "sama5d3xdm.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D31-EK"; @@ -41,7 +41,7 @@ leds { d3 { label = "d3"; - gpios = <&pioE 24 0>; + gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts index c38c9433d7a5..99bd0c8e0471 100644 --- a/arch/arm/boot/dts/sama5d33ek.dts +++ b/arch/arm/boot/dts/sama5d33ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "sama5d3xmb.dtsi" -/include/ "sama5d3xdm.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D33-EK"; diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts index 6bebfcdcb1d1..fb8ee11cf282 100644 --- a/arch/arm/boot/dts/sama5d34ek.dts +++ b/arch/arm/boot/dts/sama5d34ek.dts @@ -7,8 +7,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "sama5d3xmb.dtsi" -/include/ "sama5d3xdm.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D34-EK"; @@ -51,7 +51,7 @@ leds { d3 { label = "d3"; - gpios = <&pioE 24 0>; + gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts index a488fc4e9777..509a53d9cc7b 100644 --- a/arch/arm/boot/dts/sama5d35ek.dts +++ b/arch/arm/boot/dts/sama5d35ek.dts @@ -7,7 +7,7 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "sama5d3xmb.dtsi" +#include "sama5d3xmb.dtsi" / { model = "Atmel SAMA5D35-EK"; @@ -48,7 +48,7 @@ pb_user1 { label = "pb_user1"; - gpios = <&pioE 27 0>; + gpios = <&pioE 27 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index 1f8ed404626c..1f8050813a54 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -6,7 +6,7 @@ * * Licensed under GPLv2 or later. */ -/include/ "sama5d3.dtsi" +#include "sama5d3.dtsi" / { compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5"; @@ -32,6 +32,10 @@ ahb { apb { + spi0: spi@f0004000 { + cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; + }; + macb0: ethernet@f0028000 { phy-mode = "rgmii"; }; @@ -85,7 +89,7 @@ d2 { label = "d2"; - gpios = <&pioE 25 1>; /* PE25, conflicts with A25, RXD2 */ + gpios = <&pioE 25 GPIO_ACTIVE_LOW>; /* PE25, conflicts with A25, RXD2 */ }; }; }; diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/sama5d3xdm.dtsi index 4b8830eb2060..1c296d6b2f2a 100644 --- a/arch/arm/boot/dts/sama5d3xdm.dtsi +++ b/arch/arm/boot/dts/sama5d3xdm.dtsi @@ -33,7 +33,7 @@ board { pinctrl_qt1070_irq: qt1070_irq { atmel,pins = - <4 31 0x0 0x5>; /* PE31 GPIO with pull up deglith */ + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pull up deglith */ }; }; }; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 661d7ca9c309..8a9e05d8a4b8 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -6,7 +6,7 @@ * * Licensed under GPLv2 or later. */ -/include/ "sama5d3xcm.dtsi" +#include "sama5d3xcm.dtsi" / { compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; @@ -20,7 +20,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 17 0>; + cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>; }; }; @@ -62,7 +62,7 @@ slot@0 { reg = <0>; bus-width = <4>; - cd-gpios = <&pioD 18 0>; + cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>; }; }; @@ -87,32 +87,32 @@ board { pinctrl_mmc0_cd: mmc0_cd { atmel,pins = - <3 17 0x0 0x5>; /* PD17 GPIO with pullup deglitch */ + <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */ }; pinctrl_mmc1_cd: mmc1_cd { atmel,pins = - <3 18 0x0 0x5>; /* PD18 GPIO with pullup deglitch */ + <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */ }; pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { atmel,pins = - <3 30 0x2 0x0>; /* PD30 periph B */ + <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD30 periph B */ }; pinctrl_isi_reset: isi_reset-0 { atmel,pins = - <4 24 0x0 0x0>; /* PE24 gpio */ + <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE24 gpio */ }; pinctrl_isi_power: isi_power-0 { atmel,pins = - <4 29 0x0 0x0>; /* PE29 gpio */ + <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */ }; pinctrl_usba_vbus: usba_vbus { atmel,pins = - <3 29 0x0 0x4>; /* PD29 GPIO with deglitch */ + <AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */ }; }; }; @@ -127,7 +127,7 @@ }; usb0: gadget@00500000 { - atmel,vbus-gpio = <&pioD 29 0>; + atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; @@ -135,9 +135,9 @@ usb1: ohci@00600000 { num-ports = <3>; - atmel,vbus-gpio = <&pioD 25 0 - &pioD 26 1 - &pioD 27 1 + atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH + &pioD 26 GPIO_ACTIVE_LOW + &pioD 27 GPIO_ACTIVE_LOW >; status = "okay"; }; diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index b28fbf3408e3..6f82d9368948 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -14,13 +14,19 @@ bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk"; }; + /* This is where the interrupt is routed on the S8815 board */ + external-bus@34000000 { + ethernet@300 { + interrupt-parent = <&gpio3>; + interrupts = <8 0x1>; + }; + }; + /* Custom board node with GPIO pins to active etc */ usb-s8815 { /* The S8815 is using this very GPIO pin for the SMSC91x IRQs */ ethernet-gpio { - gpios = <&gpio3 19 0x1>; - interrupts = <19 0x1>; - interrupt-parent = <&gpio3>; + gpios = <&gpio3 8 0x1>; }; /* This will bias the MMC/SD card detect line */ mmcsd-gpio { diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index 4a7c35d6726a..078ed7f618d7 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -22,8 +22,8 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc { - uart0: uart@01c28000 { + soc@01c20000 { + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; diff --git a/arch/arm/boot/dts/tny_a9260.dts b/arch/arm/boot/dts/tny_a9260.dts index 367a16dcd5ef..dabe232216b4 100644 --- a/arch/arm/boot/dts/tny_a9260.dts +++ b/arch/arm/boot/dts/tny_a9260.dts @@ -6,8 +6,8 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9260.dtsi" -/include/ "tny_a9260_common.dtsi" +#include "at91sam9260.dtsi" +#include "tny_a9260_common.dtsi" / { model = "Calao TNY A9260"; diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts index dee9c571306b..0751a6a979a8 100644 --- a/arch/arm/boot/dts/tny_a9263.dts +++ b/arch/arm/boot/dts/tny_a9263.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91sam9263.dtsi" +#include "at91sam9263.dtsi" / { model = "Calao TNY A9263"; @@ -38,7 +38,7 @@ }; usb1: gadget@fff78000 { - atmel,vbus-gpio = <&pioB 11 0>; + atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/tny_a9g20.dts b/arch/arm/boot/dts/tny_a9g20.dts index e1ab64c72dba..8456d70bb42b 100644 --- a/arch/arm/boot/dts/tny_a9g20.dts +++ b/arch/arm/boot/dts/tny_a9g20.dts @@ -6,8 +6,8 @@ * Licensed under GPLv2. */ /dts-v1/; -/include/ "at91sam9g20.dtsi" -/include/ "tny_a9260_common.dtsi" +#include "at91sam9g20.dtsi" +#include "tny_a9260_common.dtsi" / { model = "Calao TNY A9G20"; diff --git a/arch/arm/boot/dts/usb_a9260.dts b/arch/arm/boot/dts/usb_a9260.dts index 296216058c11..a604107eb474 100644 --- a/arch/arm/boot/dts/usb_a9260.dts +++ b/arch/arm/boot/dts/usb_a9260.dts @@ -6,8 +6,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9260.dtsi" -/include/ "usb_a9260_common.dtsi" +#include "at91sam9260.dtsi" +#include "usb_a9260_common.dtsi" / { model = "Calao USB A9260"; diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi index e70d229baef5..285977682cf3 100644 --- a/arch/arm/boot/dts/usb_a9260_common.dtsi +++ b/arch/arm/boot/dts/usb_a9260_common.dtsi @@ -30,7 +30,7 @@ }; usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 5 0>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; @@ -93,7 +93,7 @@ user_led { label = "user_led"; - gpios = <&pioB 21 1>; + gpios = <&pioB 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; }; @@ -105,7 +105,7 @@ user_pb { label = "user_pb"; - gpios = <&pioB 10 1>; + gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index 6fe05ccb6203..f8ec36cb036b 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -6,7 +6,7 @@ * Licensed under GPLv2 only */ /dts-v1/; -/include/ "at91sam9263.dtsi" +#include "at91sam9263.dtsi" / { model = "Calao USB A9263"; @@ -43,7 +43,7 @@ }; usb1: gadget@fff78000 { - atmel,vbus-gpio = <&pioB 11 0>; + atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -107,7 +107,7 @@ user_led { label = "user_led"; - gpios = <&pioB 21 0>; + gpios = <&pioB 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; @@ -119,7 +119,7 @@ user_pb { label = "user_pb"; - gpios = <&pioB 10 1>; + gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi index ad3eca17c436..5b0ffc1a0b24 100644 --- a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi +++ b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi @@ -28,39 +28,39 @@ user_led1 { label = "user_led1"; - gpios = <&pioB 20 1>; + gpios = <&pioB 20 GPIO_ACTIVE_LOW>; }; /* * led already used by mother board but active as high * user_led2 { * label = "user_led2"; -* gpios = <&pioB 21 1>; +* gpios = <&pioB 21 GPIO_ACTIVE_LOW>; * }; */ user_led3 { label = "user_led3"; - gpios = <&pioB 22 1>; + gpios = <&pioB 22 GPIO_ACTIVE_LOW>; }; user_led4 { label = "user_led4"; - gpios = <&pioB 23 1>; + gpios = <&pioB 23 GPIO_ACTIVE_LOW>; }; red { label = "red"; - gpios = <&pioB 24 1>; + gpios = <&pioB 24 GPIO_ACTIVE_LOW>; }; orange { label = "orange"; - gpios = <&pioB 30 1>; + gpios = <&pioB 30 GPIO_ACTIVE_LOW>; }; green { label = "green"; - gpios = <&pioB 31 1>; + gpios = <&pioB 31 GPIO_ACTIVE_LOW>; }; }; @@ -71,25 +71,25 @@ user_pb1 { label = "user_pb1"; - gpios = <&pioB 25 1>; + gpios = <&pioB 25 GPIO_ACTIVE_LOW>; linux,code = <0x100>; }; user_pb2 { label = "user_pb2"; - gpios = <&pioB 13 1>; + gpios = <&pioB 13 GPIO_ACTIVE_LOW>; linux,code = <0x101>; }; user_pb3 { label = "user_pb3"; - gpios = <&pioA 26 1>; + gpios = <&pioA 26 GPIO_ACTIVE_LOW>; linux,code = <0x102>; }; user_pb4 { label = "user_pb4"; - gpios = <&pioC 9 1>; + gpios = <&pioC 9 GPIO_ACTIVE_LOW>; linux,code = <0x103>; }; }; diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts index 2dacb16ce4ae..c979c06cf697 100644 --- a/arch/arm/boot/dts/usb_a9g20.dts +++ b/arch/arm/boot/dts/usb_a9g20.dts @@ -6,8 +6,8 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9g20.dtsi" -/include/ "usb_a9260_common.dtsi" +#include "at91sam9g20.dtsi" +#include "usb_a9260_common.dtsi" / { model = "Calao USB A9G20"; diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 047f2a415309..a8800d361805 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y @@ -25,8 +24,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_TIMER_HZ=128 CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -42,6 +39,9 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -51,7 +51,8 @@ CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_BEET is not set CONFIG_IPV6_SIT_6RD=y -# CONFIG_WIRELESS is not set +CONFIG_CFG80211=y +CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -72,7 +73,6 @@ CONFIG_BLK_DEV_RAM_COUNT=4 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_ATMEL_PWM=y CONFIG_ATMEL_TCLIB=y -CONFIG_EEPROM_93CX6=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -81,7 +81,6 @@ CONFIG_NETDEVICES=y CONFIG_MII=y CONFIG_MACB=y # CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CHELSIO is not set # CONFIG_NET_VENDOR_FARADAY is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set @@ -92,7 +91,23 @@ CONFIG_MACB=y # CONFIG_NET_VENDOR_STMICRO is not set CONFIG_DAVICOM_PHY=y CONFIG_MICREL_PHY=y -# CONFIG_WLAN is not set +CONFIG_RTL8187=m +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_SPI=m +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT53XX=y +CONFIG_RT2800USB_RT55XX=y +CONFIG_RT2800USB_UNKNOWN=y +CONFIG_RTLWIFI=m +# CONFIG_RTLWIFI_DEBUG is not set +CONFIG_RTL8192CU=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_USB=m CONFIG_INPUT_POLLDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 @@ -112,13 +127,11 @@ CONFIG_I2C=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y -CONFIG_PINCTRL_AT91=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_SSB=m CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y CONFIG_FB_ATMEL=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set @@ -132,11 +145,8 @@ CONFIG_FONT_8x8=y CONFIG_FONT_ACORN_8x8=y CONFIG_FONT_MINI_4x6=y CONFIG_LOGO=y -# CONFIG_HID_SUPPORT is not set CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=y @@ -146,14 +156,9 @@ CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_FTDI_SIO=y CONFIG_USB_SERIAL_PL2303=y CONFIG_USB_GADGET=y -CONFIG_USB_AT91=m -CONFIG_USB_ATMEL_USBA=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_CDC_COMPOSITE=m -CONFIG_USB_G_ACM_MS=m -CONFIG_USB_G_MULTI=m -CONFIG_USB_G_MULTI_CDC=y +CONFIG_USB_AT91=y +CONFIG_USB_ATMEL_USBA=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y CONFIG_MMC_ATMELMCI=y CONFIG_NEW_LEDS=y @@ -168,16 +173,18 @@ CONFIG_RTC_DRV_AT91RM9200=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_DMADEVICES=y # CONFIG_IOMMU_SUPPORT is not set -CONFIG_EXT2_FS=y +CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set @@ -192,7 +199,7 @@ CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC_CCITT=m -CONFIG_CRC_ITU_T=m +CONFIG_CRC_CCITT=y +CONFIG_CRC_ITU_T=y CONFIG_CRC7=m CONFIG_AVERAGE=y diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig index 4ae57a34a582..8b099349c4b1 100644 --- a/arch/arm/configs/at91rm9200_defconfig +++ b/arch/arm/configs/at91rm9200_defconfig @@ -1,10 +1,12 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_USER_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y @@ -35,49 +37,37 @@ CONFIG_AT91_TIMER_HZ=100 # CONFIG_ARM_THUMB is not set CONFIG_PCCARD=y CONFIG_AT91_CF=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y +# CONFIG_COMPACTION is not set CONFIG_ZBOOT_ROM_TEXT=0x10000000 CONFIG_ZBOOT_ROM_BSS=0x20040000 CONFIG_KEXEC=y +CONFIG_AUTO_ZRELADDR=y CONFIG_FPE_NWFPE=y CONFIG_BINFMT_MISC=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y -CONFIG_XFRM_USER=m CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -CONFIG_NET_IPIP=m -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +CONFIG_IPV6=y CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_BT=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_AFS_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y @@ -94,55 +84,21 @@ CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y -CONFIG_TUN=m +CONFIG_MII=y CONFIG_ARM_AT91_ETHER=y -CONFIG_PHYLIB=y CONFIG_DAVICOM_PHY=y CONFIG_SMSC_PHY=y CONFIG_MICREL_PHY=y -CONFIG_PPP=y -CONFIG_PPP_BSDCOMP=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_MPPE=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOE=m -CONFIG_PPP_ASYNC=y -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_LEGACY_PTY_COUNT=32 +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y @@ -151,38 +107,8 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y -CONFIG_SPI_BITBANG=y CONFIG_GPIO_SYSFS=y -CONFIG_HWMON=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1029=m -CONFIG_SENSORS_ADM1031=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM73=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_PCF8591=m -CONFIG_SENSORS_SMSC47B397=m -CONFIG_SENSORS_W83781D=m -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83L785TS=m +# CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91RM9200_WATCHDOG=y @@ -194,43 +120,14 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set -CONFIG_DISPLAY_SUPPORT=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y -CONFIG_FONT_MINI_4x6=y CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=y -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_CONSOLE=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=y -CONFIG_USB_SERIAL_KEYSPAN=y -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_MCT_U232=y -CONFIG_USB_SERIAL_PL2303=y CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_AT91=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y CONFIG_MMC_ATMELMCI=y CONFIG_NEW_LEDS=y @@ -240,84 +137,27 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_REISERFS_FS=y +CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=y -CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=m CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RUBIN=y -CONFIG_CRAMFS=y -CONFIG_MINIX_FS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -CONFIG_CIFS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m +CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_FTRACE is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_SHA1=y +CONFIG_XZ_DEC_ARMTHUMB=y diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9260_9g20_defconfig index 892e8287ed73..f50c404f0d3f 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9260_9g20_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y @@ -11,7 +10,15 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9G20=y +CONFIG_ARCH_AT91SAM9260=y +CONFIG_MACH_AT91SAM9260EK=y +CONFIG_MACH_CAM60=y +CONFIG_MACH_SAM9_L9260=y +CONFIG_MACH_AFEB9260=y +CONFIG_MACH_USB_A9260=y +CONFIG_MACH_QIL_A9260=y +CONFIG_MACH_CPU9260=y +CONFIG_MACH_FLEXIBITY=y CONFIG_MACH_AT91SAM9G20EK=y CONFIG_MACH_AT91SAM9G20EK_2MMC=y CONFIG_MACH_CPU9G20=y @@ -20,10 +27,10 @@ CONFIG_MACH_PORTUXG20=y CONFIG_MACH_STAMP9G20=y CONFIG_MACH_PCONTROL_G20=y CONFIG_MACH_GSIA18S=y -CONFIG_MACH_USB_A9G20=y CONFIG_MACH_SNAPPER_9260=y CONFIG_MACH_AT91SAM9_DT=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_SLOW_CLOCK=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y CONFIG_LEDS=y @@ -33,12 +40,14 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" +CONFIG_AUTO_ZRELADDR=y CONFIG_FPE_NWFPE=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set @@ -46,8 +55,11 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y @@ -56,6 +68,8 @@ CONFIG_MTD_NAND_ATMEL=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_MISC_DEVICES=y +CONFIG_EEPROM_AT25=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -63,23 +77,36 @@ CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y CONFIG_MII=y CONFIG_MACB=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +CONFIG_SMSC_PHY=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set -CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_SERIO is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y CONFIG_SPI_SPIDEV=y +CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SEQUENCER=y @@ -94,12 +121,11 @@ CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m +CONFIG_USB_AT91=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y -CONFIG_MMC_ATMELMCI=m +CONFIG_MMC_ATMELMCI=y +CONFIG_MMC_SPI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y @@ -109,15 +135,12 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_RV3029C2=y CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_MSDOS_FS=y +CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y @@ -125,3 +148,9 @@ CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y # CONFIG_ENABLE_WARN_DEPRECATED is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO=y +# CONFIG_FTRACE is not set +CONFIG_DEBUG_LL=y +CONFIG_AT91_DEBUG_LL_DBGU0=y +CONFIG_EARLY_PRINTK=y diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig deleted file mode 100644 index 05618eb694f8..000000000000 --- a/arch/arm/configs/at91sam9260_defconfig +++ /dev/null @@ -1,91 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9260=y -CONFIG_ARCH_AT91SAM9260_SAM9XE=y -CONFIG_MACH_AT91SAM9260EK=y -CONFIG_MACH_CAM60=y -CONFIG_MACH_SAM9_L9260=y -CONFIG_MACH_AFEB9260=y -CONFIG_MACH_USB_A9260=y -CONFIG_MACH_QIL_A9260=y -CONFIG_MACH_CPU9260=y -CONFIG_MACH_FLEXIBITY=y -CONFIG_MACH_SNAPPER_9260=y -CONFIG_MACH_AT91SAM9_DT=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91SAM9X_WATCHDOG=y -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/at91sam9261_defconfig b/arch/arm/configs/at91sam9261_9g10_defconfig index c87beb973b37..9d35cd81c611 100644 --- a/arch/arm/configs/at91sam9261_defconfig +++ b/arch/arm/configs/at91sam9261_9g10_defconfig @@ -17,6 +17,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9261=y CONFIG_MACH_AT91SAM9261EK=y +CONFIG_MACH_AT91SAM9G10EK=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y @@ -38,11 +39,11 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_CFG80211=y -CONFIG_LIB80211=y CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y @@ -51,17 +52,13 @@ CONFIG_MTD_UBI=y CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_MISC_DEVICES=y CONFIG_ATMEL_TCLIB=y CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_DM9000=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set CONFIG_USB_ZD1201=m CONFIG_RTL8187=m CONFIG_LIBERTAS=m @@ -118,15 +115,11 @@ CONFIG_SND_AT73C213=y CONFIG_SND_USB_AUDIO=m # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m +CONFIG_USB_AT91=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y CONFIG_MMC_ATMELMCI=m CONFIG_NEW_LEDS=y @@ -147,12 +140,10 @@ CONFIG_SQUASHFS=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y -CONFIG_FTRACE=y CONFIG_CRC_CCITT=m diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig index 36fed66bd4b5..9d72ab684829 100644 --- a/arch/arm/configs/at91sam9263_defconfig +++ b/arch/arm/configs/at91sam9263_defconfig @@ -1,6 +1,4 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set -CONFIG_KERNEL_LZMA=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y @@ -48,9 +46,11 @@ CONFIG_IP_PIMSM_V2=y # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set CONFIG_IPV6=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -65,7 +65,6 @@ CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_MISC_DEVICES=y CONFIG_ATMEL_PWM=y CONFIG_ATMEL_TCLIB=y CONFIG_SCSI=y @@ -73,23 +72,18 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y CONFIG_MII=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_USB_ZD1201=m +CONFIG_SMSC_PHY=y +# CONFIG_WLAN is not set CONFIG_INPUT_POLLDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +# CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y -CONFIG_LEGACY_PTY_COUNT=4 +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y @@ -98,6 +92,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y +CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y @@ -107,9 +102,9 @@ CONFIG_FB_ATMEL=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_ATMEL_LCDC=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FONTS=y CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y @@ -124,16 +119,12 @@ CONFIG_SND_ATMEL_AC97C=y # CONFIG_SND_SPI is not set CONFIG_SND_USB_AUDIO=m CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m +CONFIG_USB_ATMEL_USBA=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y CONFIG_SDIO_UART=m CONFIG_MMC_ATMELMCI=m @@ -145,22 +136,18 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_FUSE_FS=m +CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y CONFIG_UBIFS_FS=y CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y -CONFIG_FTRACE=y +CONFIG_NLS_UTF8=y CONFIG_DEBUG_USER=y CONFIG_XZ_DEC=y diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index 18964cdacd68..08166cd4e7d6 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -1,4 +1,3 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y @@ -23,8 +22,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_SLOW_CLOCK=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 @@ -36,6 +33,9 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -45,9 +45,6 @@ CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_BEET is not set CONFIG_IPV6_SIT_6RD=y -CONFIG_CFG80211=y -CONFIG_LIB80211=y -CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -61,13 +58,14 @@ CONFIG_MTD_DATAFLASH=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_MISC_DEVICES=y CONFIG_ATMEL_PWM=y CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -76,67 +74,40 @@ CONFIG_NETDEVICES=y CONFIG_MII=y CONFIG_MACB=y CONFIG_DAVICOM_PHY=y -CONFIG_LIBERTAS_THINFIRM=m -CONFIG_LIBERTAS_THINFIRM_USB=m -CONFIG_AT76C50X_USB=m -CONFIG_USB_ZD1201=m -CONFIG_RTL8187=m -CONFIG_ATH_COMMON=m -CONFIG_ATH9K=m -CONFIG_CARL9170=m -CONFIG_B43=m -CONFIG_B43_PHY_N=y -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_SDIO=m -CONFIG_LIBERTAS_SPI=m -CONFIG_RT2X00=m -CONFIG_RT2500USB=m -CONFIG_RT73USB=m -CONFIG_RT2800USB=m -CONFIG_RT2800USB_RT53XX=y -CONFIG_RT2800USB_UNKNOWN=y -CONFIG_RTL8192CU=m -CONFIG_WL1251=m -CONFIG_WL1251_SDIO=m -CONFIG_WL12XX_MENU=m -CONFIG_WL12XX=m -CONFIG_WL12XX_SDIO=m -CONFIG_ZD1211RW=m -CONFIG_MWIFIEX=m -CONFIG_MWIFIEX_SDIO=m -CONFIG_INPUT_POLLDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272 +# CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_QT1070=m -CONFIG_KEYBOARD_QT2160=m +CONFIG_KEYBOARD_QT1070=y +CONFIG_KEYBOARD_QT2160=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y # CONFIG_SERIO is not set -CONFIG_LEGACY_PTY_COUNT=4 +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_ATMEL=y -CONFIG_FB_UDL=m CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_ATMEL_LCDC=y +CONFIG_BACKLIGHT_ATMEL_PWM=y # CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FONTS=y +CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SEQUENCER=y @@ -148,33 +119,25 @@ CONFIG_SND_PCM_OSS=y # CONFIG_SND_ARM is not set CONFIG_SND_ATMEL_AC97C=y # CONFIG_SND_SPI is not set -CONFIG_SND_USB_AUDIO=m +# CONFIG_SND_USB is not set # CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y -CONFIG_USB_ATMEL_USBA=m -CONFIG_USB_ZERO=m -CONFIG_USB_AUDIO=m -CONFIG_USB_ETH=m -CONFIG_USB_ETH_EEM=y -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_CDC_COMPOSITE=m -CONFIG_USB_G_MULTI=m +CONFIG_USB_ATMEL_USBA=y +CONFIG_USB_G_MULTI=y CONFIG_USB_G_MULTI_CDC=y CONFIG_MMC=y # CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_SDIO_UART=m CONFIG_MMC_ATMELMCI=y -CONFIG_LEDS_ATMEL_PWM=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_GPIO=y @@ -184,17 +147,14 @@ CONFIG_DMADEVICES=y CONFIG_AT_HDMAC=y CONFIG_DMATEST=m # CONFIG_IOMMU_SUPPORT is not set -CONFIG_EXT2_FS=y +CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -CONFIG_SQUASHFS_EMBEDDED=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y @@ -203,6 +163,8 @@ CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y CONFIG_CRYPTO_ECB=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_USER_API_HASH=m diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 7e0ebb64a7f9..9940f7b4e438 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -199,7 +199,6 @@ CONFIG_USB_PHY=y CONFIG_USB_DEBUG=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c1ef64bc5abd..abbe31937c65 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -20,6 +20,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_OMAP2PLUS=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX_DEBUG=y @@ -204,7 +205,6 @@ CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y -CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 4d0dc3c16063..f6e78f83c3c3 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -26,7 +26,9 @@ CONFIG_AEABI=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" +CONFIG_KEXEC=y CONFIG_AUTO_ZRELADDR=y CONFIG_VFP=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set @@ -39,6 +41,9 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -68,6 +73,8 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y +CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 @@ -95,7 +102,19 @@ CONFIG_MACB=y # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_WIZNET is not set CONFIG_MICREL_PHY=y -# CONFIG_WLAN is not set +CONFIG_LIBERTAS_THINFIRM=m +CONFIG_LIBERTAS_THINFIRM_USB=m +CONFIG_RTL8187=m +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT53XX=y +CONFIG_RT2800USB_RT55XX=y +CONFIG_RT2800USB_UNKNOWN=y +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_USB=m # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -133,9 +152,13 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=y CONFIG_USB_STORAGE=y +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_FTDI_SIO=y +CONFIG_USB_SERIAL_PL2303=y CONFIG_USB_GADGET=y -CONFIG_USB_AT91=y -CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_ATMEL_USBA=y +CONFIG_USB_G_SERIAL=y CONFIG_MMC=y # CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_ATMELMCI=y @@ -151,18 +174,18 @@ CONFIG_DMADEVICES=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_AT91_ADC=y -CONFIG_EXT2_FS=y +CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index a5f0485133cf..f7ba316164d4 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -153,6 +153,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_DRM=y +CONFIG_TEGRA_HOST1X=y CONFIG_DRM_TEGRA=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set @@ -202,7 +203,7 @@ CONFIG_TEGRA20_APB_DMA=y CONFIG_STAGING=y CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_ISL29028=y -CONFIG_SENSORS_AK8975=y +CONFIG_AK8975=y CONFIG_MFD_NVEC=y CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S index 92c6eed7aac9..99207c45ec10 100644 --- a/arch/arm/crypto/sha1-armv4-large.S +++ b/arch/arm/crypto/sha1-armv4-large.S @@ -195,6 +195,7 @@ ENTRY(sha1_block_data_order) add r3,r3,r10 @ E+=F_00_19(B,C,D) cmp r14,sp bne .L_00_15 @ [((11+4)*5+2)*3] + sub sp,sp,#25*4 #if __ARM_ARCH__<7 ldrb r10,[r1,#2] ldrb r9,[r1,#3] @@ -290,7 +291,6 @@ ENTRY(sha1_block_data_order) add r3,r3,r10 @ E+=F_00_19(B,C,D) ldr r8,.LK_20_39 @ [+15+16*4] - sub sp,sp,#25*4 cmn sp,#0 @ [+3], clear carry to denote 20_39 .L_20_39_or_60_79: ldr r9,[r14,#15*4] diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S index 2848857f5b62..fbd24beeb1fa 100644 --- a/arch/arm/include/debug/ux500.S +++ b/arch/arm/include/debug/ux500.S @@ -24,9 +24,9 @@ #define U8500_UART0_PHYS_BASE (0x80120000) #define U8500_UART1_PHYS_BASE (0x80121000) #define U8500_UART2_PHYS_BASE (0x80007000) -#define U8500_UART0_VIRT_BASE (0xa8120000) -#define U8500_UART1_VIRT_BASE (0xa8121000) -#define U8500_UART2_VIRT_BASE (0xa8007000) +#define U8500_UART0_VIRT_BASE (0xf8120000) +#define U8500_UART1_VIRT_BASE (0xf8121000) +#define U8500_UART2_VIRT_BASE (0xf8007000) #define __UX500_PHYS_UART(n) U8500_UART##n##_PHYS_BASE #define __UX500_VIRT_UART(n) U8500_UART##n##_VIRT_BASE #endif diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index f21970316836..282de4826abb 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -411,7 +411,6 @@ static struct vm_area_struct gate_vma = { .vm_start = 0xffff0000, .vm_end = 0xffff0000 + PAGE_SIZE, .vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYEXEC, - .vm_mm = &init_mm, }; static int __init gate_vma_init(void) diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 47ab90563bf4..550d63cef68e 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -251,7 +251,7 @@ void __ref cpu_die(void) * this returns, power and/or clocks can be removed at any point * from this CPU and its cache by platform_cpu_kill(). */ - RCU_NONIDLE(complete(&cpu_died)); + complete(&cpu_died); /* * Ensure that the cache lines associated with that completion are diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt index 6c24985515a2..1a2abd8ed407 100644 --- a/arch/arm/mach-at91/Kconfig.non_dt +++ b/arch/arm/mach-at91/Kconfig.non_dt @@ -14,15 +14,11 @@ config ARCH_AT91RM9200 select SOC_AT91RM9200 config ARCH_AT91SAM9260 - bool "AT91SAM9260 or AT91SAM9XE" + bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20" select SOC_AT91SAM9260 config ARCH_AT91SAM9261 - bool "AT91SAM9261" - select SOC_AT91SAM9261 - -config ARCH_AT91SAM9G10 - bool "AT91SAM9G10" + bool "AT91SAM9261 or AT91SAM9G10" select SOC_AT91SAM9261 config ARCH_AT91SAM9263 @@ -33,10 +29,6 @@ config ARCH_AT91SAM9RL bool "AT91SAM9RL" select SOC_AT91SAM9RL -config ARCH_AT91SAM9G20 - bool "AT91SAM9G20" - select SOC_AT91SAM9260 - config ARCH_AT91SAM9G45 bool "AT91SAM9G45" select SOC_AT91SAM9G45 @@ -50,6 +42,14 @@ config ARCH_AT91X40 endchoice +config ARCH_AT91SAM9G20 + bool + select ARCH_AT91SAM9260 + +config ARCH_AT91SAM9G10 + bool + select ARCH_AT91SAM9261 + # ---------------------------------------------------------- if ARCH_AT91RM9200 @@ -207,76 +207,6 @@ config MACH_FLEXIBITY Select this if you are using Flexibity Connect board <http://www.flexibity.com> -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9261 - -comment "AT91SAM9261 Board Type" - -config MACH_AT91SAM9261EK - bool "Atmel AT91SAM9261-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9G10 - -comment "AT91SAM9G10 Board Type" - -config MACH_AT91SAM9G10EK - bool "Atmel AT91SAM9G10-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9263 - -comment "AT91SAM9263 Board Type" - -config MACH_AT91SAM9263EK - bool "Atmel AT91SAM9263-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> - -config MACH_USB_A9263 - bool "CALAO USB-A9263" - help - Select this if you are using a Calao Systems USB-A9263. - <http://www.calao-systems.com> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9RL - -comment "AT91SAM9RL Board Type" - -config MACH_AT91SAM9RLEK - bool "Atmel AT91SAM9RL-EK Evaluation Kit" - help - Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9G20 - comment "AT91SAM9G20 Board Type" config MACH_AT91SAM9G20EK @@ -341,17 +271,70 @@ config MACH_USB_A9G20 Select this if you are using a Calao Systems USB-A9G20. <http://www.calao-systems.com> +config MACH_SNAPPER_9260 + bool "Bluewater Systems Snapper 9260/9G20 module" + help + Select this if you are using the Bluewater Systems Snapper 9260 or + Snapper 9G20 modules. + <http://www.bluewatersys.com/> endif -if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) -comment "AT91SAM9260/AT91SAM9G20 boards" +# ---------------------------------------------------------- + +if ARCH_AT91SAM9261 + +comment "AT91SAM9261 Board Type" + +config MACH_AT91SAM9261EK + bool "Atmel AT91SAM9261-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> + +comment "AT91SAM9G10 Board Type" + +config MACH_AT91SAM9G10EK + bool "Atmel AT91SAM9G10-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9263 + +comment "AT91SAM9263 Board Type" + +config MACH_AT91SAM9263EK + bool "Atmel AT91SAM9263-EK Evaluation Kit" + select HAVE_AT91_DATAFLASH_CARD + help + Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. + <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> + +config MACH_USB_A9263 + bool "CALAO USB-A9263" + help + Select this if you are using a Calao Systems USB-A9263. + <http://www.calao-systems.com> + +endif + +# ---------------------------------------------------------- + +if ARCH_AT91SAM9RL + +comment "AT91SAM9RL Board Type" + +config MACH_AT91SAM9RLEK + bool "Atmel AT91SAM9RL-EK Evaluation Kit" + help + Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. -config MACH_SNAPPER_9260 - bool "Bluewater Systems Snapper 9260/9G20 module" - help - Select this if you are using the Bluewater Systems Snapper 9260 or - Snapper 9G20 modules. - <http://www.bluewatersys.com/> endif # ---------------------------------------------------------- diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 788562dccb43..f4a5f7998bd7 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -27,10 +27,8 @@ obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o -obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261_devices.o obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263_devices.o obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl_devices.o -obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260_devices.o obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45_devices.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 2acdff4c1dfe..180b3024bec3 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -174,6 +174,7 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) static struct clock_event_device clkevt = { .name = "at91_tick", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, .rating = 150, .set_next_event = clkevt32k_next_event, .set_mode = clkevt32k_mode, @@ -264,9 +265,11 @@ void __init at91rm9200_timer_init(void) at91_st_write(AT91_ST_RTMR, 1); /* Setup timer clockevent, with minimum of two ticks (important!!) */ + clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift); + clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt); + clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1; clkevt.cpumask = cpumask_of(0); - clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK, - 2, AT91_ST_ALMV); + clockevents_register_device(&clkevt); /* register clocksource */ clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 13cdbcd48f51..c7d670d11802 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -223,13 +223,7 @@ static void __init at91sam9n12_map_io(void) at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE); } -void __init at91sam9n12_initialize(void) -{ - at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0); -} - AT91_SOC_START(at91sam9n12) .map_io = at91sam9n12_map_io, .register_clocks = at91sam9n12_register_clocks, - .init = at91sam9n12_initialize, AT91_SOC_END diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index b446645c7727..d3437624ca4e 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -264,11 +264,7 @@ static void __init ek_add_device_ts(void) {} */ static struct at73c213_board_info at73c213_data = { .ssc_id = 1, -#if defined(CONFIG_MACH_AT91SAM9261EK) - .shortname = "AT91SAM9261-EK external DAC", -#else - .shortname = "AT91SAM9G10-EK external DAC", -#endif + .shortname = "AT91SAM9261/9G10-EK external DAC", }; #if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) @@ -412,9 +408,6 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = { .default_monspecs = &at91fb_default_stn_monspecs, .atmel_lcdfb_power_control = at91_lcdc_stn_power_control, .guard_time = 1, -#if defined(CONFIG_MACH_AT91SAM9G10EK) - .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB, -#endif }; #else @@ -468,9 +461,6 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = { .default_monspecs = &at91fb_default_tft_monspecs, .atmel_lcdfb_power_control = at91_lcdc_tft_power_control, .guard_time = 1, -#if defined(CONFIG_MACH_AT91SAM9G10EK) - .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB, -#endif }; #endif @@ -574,6 +564,10 @@ static void __init ek_board_init(void) /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); at91_add_device_serial(); + + if (cpu_is_at91sam9g10()) + ek_lcdc_data.lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB; + /* USB Host */ at91_add_device_usbh(&ek_usbh_data); /* USB Device */ @@ -606,11 +600,17 @@ static void __init ek_board_init(void) at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); } -#if defined(CONFIG_MACH_AT91SAM9261EK) MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") -#else + /* Maintainer: Atmel */ + .init_time = at91sam926x_pit_init, + .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, + .init_early = ek_init_early, + .init_irq = at91_init_irq_default, + .init_machine = ek_board_init, +MACHINE_END + MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") -#endif /* Maintainer: Atmel */ .init_time = at91sam926x_pit_init, .map_io = at91_map_io, diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 31df12029c4e..2bd7f51b0b82 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -179,9 +179,9 @@ extern void __iomem *at91_pmc_base; #define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */ #define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */ #define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */ -#define AT91_PMC_PCR_DIV2 0x2 /* Peripheral clock is MCK/2 */ -#define AT91_PMC_PCR_DIV4 0x4 /* Peripheral clock is MCK/4 */ -#define AT91_PMC_PCR_DIV8 0x8 /* Peripheral clock is MCK/8 */ +#define AT91_PMC_PCR_DIV2 0x1 /* Peripheral clock is MCK/2 */ +#define AT91_PMC_PCR_DIV4 0x2 /* Peripheral clock is MCK/4 */ +#define AT91_PMC_PCR_DIV8 0x3 /* Peripheral clock is MCK/8 */ #define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */ #endif diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 151259003086..dda9a2bd3acb 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -177,7 +177,8 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; -static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", }; +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", }; +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", }; @@ -185,7 +186,7 @@ static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd static const char *gpu_axi_sels[] = { "axi", "ahb", }; static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", }; static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; -static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", }; +static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", }; static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; @@ -369,8 +370,8 @@ int __init mx6q_clocks_init(void) clk[pll1_sw] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); clk[periph_pre] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); clk[periph2_pre] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); - clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); - clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); clk[axi_sel] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels)); clk[esai_sel] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); clk[asrc_sel] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); @@ -498,7 +499,7 @@ int __init mx6q_clocks_init(void) clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14); clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10); clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16); - clk[mlb] = imx_clk_gate2("mlb", "pll8_mlb", base + 0x74, 18); + clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18); clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20); clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22); clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28); diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index 67b9c48dcafe..627f16f0e9d1 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -18,8 +18,20 @@ .section ".text.head", "ax" #ifdef CONFIG_SMP +diag_reg_offset: + .word g_diag_reg - . + + .macro set_diag_reg + adr r0, diag_reg_offset + ldr r1, [r0] + add r1, r1, r0 @ r1 = physical &g_diag_reg + ldr r0, [r1] + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register + .endm + ENTRY(v7_secondary_startup) bl v7_invalidate_l1 + set_diag_reg b secondary_startup ENDPROC(v7_secondary_startup) #endif diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 4a69305db65e..c6e1ab544882 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/smp.h> +#include <asm/cacheflush.h> #include <asm/page.h> #include <asm/smp_scu.h> #include <asm/mach/map.h> @@ -21,6 +22,7 @@ #define SCU_STANDBY_ENABLE (1 << 5) +u32 g_diag_reg; static void __iomem *scu_base; static struct map_desc scu_io_desc __initdata = { @@ -80,6 +82,18 @@ void imx_smp_prepare(void) static void __init imx_smp_prepare_cpus(unsigned int max_cpus) { imx_smp_prepare(); + + /* + * The diagnostic register holds the errata bits. Mostly bootloader + * does not bring up secondary cores, so that when errata bits are set + * in bootloader, they are set only for boot cpu. But on a SMP + * configuration, it should be equally done on every single core. + * Read the register from boot cpu here, and will replicate it into + * secondary cores when booting them. + */ + asm("mrc p15, 0, %0, c15, c0, 1" : "=r" (g_diag_reg) : : "cc"); + __cpuc_flush_dcache_area(&g_diag_reg, sizeof(g_diag_reg)); + outer_clean_range(__pa(&g_diag_reg), __pa(&g_diag_reg + 1)); } struct smp_operations imx_smp_ops __initdata = { diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c2cae69e6d2b..f38922897563 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -528,12 +528,6 @@ void __init kirkwood_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); - /* - * Some Kirkwood devices allocate their coherent buffers from atomic - * context. Increase size of atomic coherent pool to make sure such - * the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); mvebu_mbus_init("marvell,kirkwood-mbus", BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ); diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 283abff90228..e1267d6b468f 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -124,7 +124,7 @@ static void __init qnap_ts219_init(void) static int __init ts219_pci_init(void) { if (machine_is_ts219()) - kirkwood_pcie_init(KW_PCIE0); + kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0); return 0; } diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index e11acbb0a46d..80a8bcacd9d5 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -15,6 +15,7 @@ config ARCH_MVEBU select MVEBU_CLK_GATING select MVEBU_MBUS select ZONE_DMA if ARM_LPAE + select ARCH_REQUIRE_GPIOLIB if ARCH_MVEBU diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c index 42a4cb3087e2..1c48890bb72b 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -54,13 +54,6 @@ void __init armada_370_xp_init_early(void) char *mbus_soc_name; /* - * Some Armada 370/XP devices allocate their coherent buffers - * from atomic context. Increase size of atomic coherent pool - * to make sure such the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); - - /* * This initialization will be replaced by a DT-based * initialization once the mvebu-mbus driver gains DT support. */ diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 68ab858e27b7..a94b3a718d1a 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -345,6 +345,7 @@ static int __init omap1_system_dma_init(void) dev_err(&pdev->dev, "%s: Memory allocation failed for d->chan!\n", __func__); + ret = -ENOMEM; goto exit_release_d; } diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c index 6ebc7803bc3e..af3544ce4f02 100644 --- a/arch/arm/mach-omap2/cclock33xx_data.c +++ b/arch/arm/mach-omap2/cclock33xx_data.c @@ -454,9 +454,29 @@ DEFINE_CLK_GATE(cefuse_fck, "sys_clkin_ck", &sys_clkin_ck, 0x0, */ DEFINE_CLK_FIXED_FACTOR(clkdiv32k_ck, "clk_24mhz", &clk_24mhz, 0x0, 1, 732); -DEFINE_CLK_GATE(clkdiv32k_ick, "clkdiv32k_ck", &clkdiv32k_ck, 0x0, - AM33XX_CM_PER_CLKDIV32K_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT, - 0x0, NULL); +static struct clk clkdiv32k_ick; + +static const char *clkdiv32k_ick_parent_names[] = { + "clkdiv32k_ck", +}; + +static const struct clk_ops clkdiv32k_ick_ops = { + .enable = &omap2_dflt_clk_enable, + .disable = &omap2_dflt_clk_disable, + .is_enabled = &omap2_dflt_clk_is_enabled, + .init = &omap2_init_clk_clkdm, +}; + +static struct clk_hw_omap clkdiv32k_ick_hw = { + .hw = { + .clk = &clkdiv32k_ick, + }, + .enable_reg = AM33XX_CM_PER_CLKDIV32K_CLKCTRL, + .enable_bit = AM33XX_MODULEMODE_SWCTRL_SHIFT, + .clkdm_name = "clk_24mhz_clkdm", +}; + +DEFINE_STRUCT_CLK(clkdiv32k_ick, clkdiv32k_ick_parent_names, clkdiv32k_ick_ops); /* "usbotg_fck" is an additional clock and not really a modulemode */ DEFINE_CLK_GATE(usbotg_fck, "dpll_per_ck", &dpll_per_ck, 0x0, diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d25a95fe9921..7341eff63f56 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1356,13 +1356,27 @@ static void _enable_sysc(struct omap_hwmod *oh) clkdm = _get_clkdm(oh); if (sf & SYSC_HAS_SIDLEMODE) { + if (oh->flags & HWMOD_SWSUP_SIDLE || + oh->flags & HWMOD_SWSUP_SIDLE_ACT) { + idlemode = HWMOD_IDLEMODE_NO; + } else { + if (sf & SYSC_HAS_ENAWAKEUP) + _enable_wakeup(oh, &v); + if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + } + + /* + * This is special handling for some IPs like + * 32k sync timer. Force them to idle! + */ clkdm_act = (clkdm && clkdm->flags & CLKDM_ACTIVE_WITH_MPU); if (clkdm_act && !(oh->class->sysc->idlemodes & (SIDLE_SMART | SIDLE_SMART_WKUP))) idlemode = HWMOD_IDLEMODE_FORCE; - else - idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? - HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; + _set_slave_idlemode(oh, idlemode, &v); } @@ -1391,10 +1405,6 @@ static void _enable_sysc(struct omap_hwmod *oh) (sf & SYSC_HAS_CLOCKACTIVITY)) _set_clockactivity(oh, oh->class->sysc->clockact, &v); - /* If slave is in SMARTIDLE, also enable wakeup */ - if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE)) - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); /* @@ -1430,13 +1440,16 @@ static void _idle_sysc(struct omap_hwmod *oh) sf = oh->class->sysc->sysc_flags; if (sf & SYSC_HAS_SIDLEMODE) { - /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */ - if (oh->flags & HWMOD_SWSUP_SIDLE || - !(oh->class->sysc->idlemodes & - (SIDLE_SMART | SIDLE_SMART_WKUP))) + if (oh->flags & HWMOD_SWSUP_SIDLE) { idlemode = HWMOD_IDLEMODE_FORCE; - else - idlemode = HWMOD_IDLEMODE_SMART; + } else { + if (sf & SYSC_HAS_ENAWAKEUP) + _enable_wakeup(oh, &v); + if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + } _set_slave_idlemode(oh, idlemode, &v); } @@ -1455,10 +1468,6 @@ static void _idle_sysc(struct omap_hwmod *oh) _set_master_standbymode(oh, idlemode, &v); } - /* If slave is in SMARTIDLE, also enable wakeup */ - if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE)) - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); } @@ -2065,7 +2074,7 @@ static int _omap4_get_context_lost(struct omap_hwmod *oh) * do so is present in the hwmod data, then call it and pass along the * return value; otherwise, return 0. */ -static int __init _enable_preprogram(struct omap_hwmod *oh) +static int _enable_preprogram(struct omap_hwmod *oh) { if (!oh->class->enable_preprogram) return 0; @@ -2246,42 +2255,6 @@ static int _idle(struct omap_hwmod *oh) } /** - * omap_hwmod_set_ocp_autoidle - set the hwmod's OCP autoidle bit - * @oh: struct omap_hwmod * - * @autoidle: desired AUTOIDLE bitfield value (0 or 1) - * - * Sets the IP block's OCP autoidle bit in hardware, and updates our - * local copy. Intended to be used by drivers that require - * direct manipulation of the AUTOIDLE bits. - * Returns -EINVAL if @oh is null or is not in the ENABLED state, or passes - * along the return value from _set_module_autoidle(). - * - * Any users of this function should be scrutinized carefully. - */ -int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle) -{ - u32 v; - int retval = 0; - unsigned long flags; - - if (!oh || oh->_state != _HWMOD_STATE_ENABLED) - return -EINVAL; - - spin_lock_irqsave(&oh->_lock, flags); - - v = oh->_sysc_cache; - - retval = _set_module_autoidle(oh, autoidle, &v); - - if (!retval) - _write_sysconfig(v, oh); - - spin_unlock_irqrestore(&oh->_lock, flags); - - return retval; -} - -/** * _shutdown - shutdown an omap_hwmod * @oh: struct omap_hwmod * * @@ -3180,38 +3153,6 @@ error: } /** - * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode - * @oh: struct omap_hwmod * - * @idlemode: SIDLEMODE field bits (shifted to bit 0) - * - * Sets the IP block's OCP slave idlemode in hardware, and updates our - * local copy. Intended to be used by drivers that have some erratum - * that requires direct manipulation of the SIDLEMODE bits. Returns - * -EINVAL if @oh is null, or passes along the return value from - * _set_slave_idlemode(). - * - * XXX Does this function have any current users? If not, we should - * remove it; it is better to let the rest of the hwmod code handle this. - * Any users of this function should be scrutinized carefully. - */ -int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode) -{ - u32 v; - int retval = 0; - - if (!oh) - return -EINVAL; - - v = oh->_sysc_cache; - - retval = _set_slave_idlemode(oh, idlemode, &v); - if (!retval) - _write_sysconfig(v, oh); - - return retval; -} - -/** * omap_hwmod_lookup - look up a registered omap_hwmod by name * @name: name of the omap_hwmod to look up * diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index fe5962921f07..0c898f58ac9b 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -463,6 +463,9 @@ struct omap_hwmod_omap4_prcm { * is kept in force-standby mode. Failing to do so causes PM problems * with musb on OMAP3630 at least. Note that musb has a dedicated register * to control MSTANDBY signal when MIDLEMODE is set to force-standby. + * HWMOD_SWSUP_SIDLE_ACT: omap_hwmod code should manually bring the module + * out of idle, but rely on smart-idle to the put it back in idle, + * so the wakeups are still functional (Only known case for now is UART) */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -476,6 +479,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) #define HWMOD_BLOCK_WFI (1 << 10) #define HWMOD_FORCE_MSTANDBY (1 << 11) +#define HWMOD_SWSUP_SIDLE_ACT (1 << 12) /* * omap_hwmod._int_flags definitions @@ -641,9 +645,6 @@ int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name); int omap_hwmod_enable_clocks(struct omap_hwmod *oh); int omap_hwmod_disable_clocks(struct omap_hwmod *oh); -int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode); -int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle); - int omap_hwmod_reset(struct omap_hwmod *oh); void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index c8c64b3e1acc..d05fc7b54567 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -512,6 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -531,6 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -550,6 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 01d8f324450a..075f7cc51026 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -1995,6 +1995,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = { .name = "uart1", .class = &uart_class, .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart1_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_wkupdm_ck", @@ -2015,6 +2016,7 @@ static struct omap_hwmod am33xx_uart2_hwmod = { .name = "uart2", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart2_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2042,6 +2044,7 @@ static struct omap_hwmod am33xx_uart3_hwmod = { .name = "uart3", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart3_irqs, .sdma_reqs = uart3_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2062,6 +2065,7 @@ static struct omap_hwmod am33xx_uart4_hwmod = { .name = "uart4", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart4_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2082,6 +2086,7 @@ static struct omap_hwmod am33xx_uart5_hwmod = { .name = "uart5", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart5_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2102,6 +2107,7 @@ static struct omap_hwmod am33xx_uart6_hwmod = { .name = "uart6", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart6_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 4083606ea1da..31c7126eb3bb 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -490,6 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -508,6 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -526,6 +528,7 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, @@ -555,6 +558,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { .mpu_irqs = uart4_mpu_irqs, .sdma_reqs = uart4_sdma_reqs, .main_clk = "uart4_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index eaba9dc91a0d..848b6dc67590 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -3434,6 +3434,7 @@ static struct omap_hwmod omap44xx_uart1_hwmod = { .name = "uart1", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart1_irqs, .sdma_reqs = omap44xx_uart1_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3462,6 +3463,7 @@ static struct omap_hwmod omap44xx_uart2_hwmod = { .name = "uart2", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart2_irqs, .sdma_reqs = omap44xx_uart2_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3490,7 +3492,8 @@ static struct omap_hwmod omap44xx_uart3_hwmod = { .name = "uart3", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | + HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart3_irqs, .sdma_reqs = omap44xx_uart3_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3519,6 +3522,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { .name = "uart4", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart4_irqs, .sdma_reqs = omap44xx_uart4_sdma_reqs, .main_clk = "func_48m_fclk", diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 8396b5b7e912..f6601563aa69 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -95,38 +95,9 @@ static void omap_uart_enable_wakeup(struct device *dev, bool enable) omap_hwmod_disable_wakeup(od->hwmods[0]); } -/* - * Errata i291: [UART]:Cannot Acknowledge Idle Requests - * in Smartidle Mode When Configured for DMA Operations. - * WA: configure uart in force idle mode. - */ -static void omap_uart_set_noidle(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); -} - -static void omap_uart_set_smartidle(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - u8 idlemode; - - if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP) - idlemode = HWMOD_IDLEMODE_SMART_WKUP; - else - idlemode = HWMOD_IDLEMODE_SMART; - - omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode); -} - #else static void omap_uart_enable_wakeup(struct device *dev, bool enable) {} -static void omap_uart_set_noidle(struct device *dev) {} -static void omap_uart_set_smartidle(struct device *dev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX @@ -299,8 +270,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; omap_up.flags = UPF_BOOT_AUTOCONF; omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; - omap_up.set_forceidle = omap_uart_set_smartidle; - omap_up.set_noidle = omap_uart_set_noidle; omap_up.enable_wakeup = omap_uart_enable_wakeup; omap_up.dma_rx_buf_size = info->dma_rx_buf_size; omap_up.dma_rx_timeout = info->dma_rx_timeout; diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index b97fd672e89d..f8a6db9239bf 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -199,13 +199,6 @@ void __init orion5x_init_early(void) orion_time_set_base(TIMER_VIRT_BASE); - /* - * Some Orion5x devices allocate their coherent buffers from atomic - * context. Increase size of atomic coherent pool to make sure such - * the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); - /* Initialize the MBUS driver */ orion5x_pcie_id(&dev, &rev); if (dev == MV88F5281_DEV_ID) diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 91052855cc12..b9594e911ce7 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -212,8 +212,8 @@ static struct platform_device *marzen_devices[] __initdata = { static struct usb_phy *phy; static int usb_power_on(struct platform_device *pdev) { - if (!phy) - return -EIO; + if (IS_ERR(phy)) + return PTR_ERR(phy); pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); @@ -225,7 +225,7 @@ static int usb_power_on(struct platform_device *pdev) static void usb_power_off(struct platform_device *pdev) { - if (!phy) + if (IS_ERR(phy)) return; usb_phy_shutdown(phy); diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index d259c782d742..5b045e302b43 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,5 +1,6 @@ config ARCH_SUNXI bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO select CLKSRC_OF select COMMON_CLK diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 6a4387e39df8..b19b07204aaf 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -51,6 +51,7 @@ config MACH_MOP500 bool "U8500 Development platform, MOP500 versions" select I2C select I2C_NOMADIK + select REGULATOR select REGULATOR_FIXED_VOLTAGE select SOC_BUS select UX500_SOC_DB8500 diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 3cd555ac6d0a..78389de94dde 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -623,7 +623,7 @@ static void __init mop500_init_machine(void) sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL; mop500_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; @@ -660,7 +660,7 @@ static void __init snowball_init_machine(void) sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO; snowball_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) snowball_platform_devs[i]->dev.parent = parent; @@ -698,7 +698,7 @@ static void __init hrefv60_init_machine(void) sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO; hrefv60_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index e90b5ab23b6d..46cca52890bc 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -206,7 +206,7 @@ static struct device * __init db8500_soc_device_init(void) /* * This function is called from the board init */ -struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) +struct device * __init u8500_init_devices(void) { struct device *parent; int i; @@ -220,8 +220,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) for (i = 0; i < ARRAY_SIZE(platform_devs); i++) platform_devs[i]->dev.parent = parent; - db8500_prcmu_device.dev.platform_data = ab8500; - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); return parent; @@ -278,7 +276,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", &db8500_prcmu_pdata), - OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x", NULL), + OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL), /* Requires device name bindings. */ OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE, "pinctrl-db8500", NULL), diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index bddce2b49372..cad3ca86c540 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -18,7 +18,7 @@ void __init ux500_map_io(void); extern void __init u8500_map_io(void); -extern struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500); +extern struct device * __init u8500_init_devices(void); extern void __init ux500_init_irq(void); extern void __init ux500_init_late(void); diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 70a5ac9cb384..f8f2f00856e0 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -172,6 +172,7 @@ static const char * const vt8500_dt_compat[] = { "wm,wm8505", "wm,wm8750", "wm,wm8850", + NULL }; DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)") diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 251f827271e9..c019b7aaf776 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -383,7 +383,7 @@ static struct resource orion_ge10_shared_resources[] = { static struct platform_device orion_ge10_shared = { .name = MV643XX_ETH_SHARED_NAME, - .id = 1, + .id = 2, .dev = { .platform_data = &orion_ge10_shared_data, }, @@ -398,8 +398,8 @@ static struct resource orion_ge10_resources[] = { static struct platform_device orion_ge10 = { .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = 2, + .id = 2, + .num_resources = 1, .resource = orion_ge10_resources, .dev = { .coherent_dma_mask = DMA_BIT_MASK(32), @@ -432,7 +432,7 @@ static struct resource orion_ge11_shared_resources[] = { static struct platform_device orion_ge11_shared = { .name = MV643XX_ETH_SHARED_NAME, - .id = 1, + .id = 3, .dev = { .platform_data = &orion_ge11_shared_data, }, @@ -447,8 +447,8 @@ static struct resource orion_ge11_resources[] = { static struct platform_device orion_ge11 = { .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = 2, + .id = 3, + .num_resources = 1, .resource = orion_ge11_resources, .dev = { .coherent_dma_mask = DMA_BIT_MASK(32), diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index e06fc5fefa14..d9a24f605a2b 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -10,6 +10,7 @@ #ifndef __PLAT_COMMON_H #include <linux/mv643xx_eth.h> +#include <linux/platform_data/usb-ehci-orion.h> struct dsa_platform_data; struct mv_sata_platform_data; diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 323ce1a62bbf..46e17492fd1f 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -60,7 +60,7 @@ ENTRY(vfp_testing_entry) str r11, [r10, #TI_PREEMPT] #endif ldr r0, VFP_arch_address - str r5, [r0] @ known non-zero value + str r0, [r0] @ set to non-zero value mov pc, r9 @ we have handled the fault ENDPROC(vfp_testing_entry) |