diff options
Diffstat (limited to 'arch/arm')
70 files changed, 1780 insertions, 3270 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3f8718fc4050..1cb098f6950b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -699,14 +699,14 @@ config ARCH_S5P6442 help Samsung S5P6442 CPU based systems -config ARCH_S5PC1XX - bool "Samsung S5PC1XX" +config ARCH_S5PC100 + bool "Samsung S5PC100" select GENERIC_GPIO select HAVE_CLK select CPU_V7 select ARM_L1_CACHE_SHIFT_6 help - Samsung S5PC1XX series based systems + Samsung S5PC100 series based systems config ARCH_S5PV210 bool "Samsung S5PV210/S5PC110" @@ -890,7 +890,6 @@ source "arch/arm/mach-sa1100/Kconfig" source "arch/arm/plat-samsung/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" source "arch/arm/plat-s5p/Kconfig" -source "arch/arm/plat-s5pc1xx/Kconfig" if ARCH_S3C2410 source "arch/arm/mach-s3c2400/Kconfig" @@ -909,9 +908,7 @@ source "arch/arm/mach-s5p6440/Kconfig" source "arch/arm/mach-s5p6442/Kconfig" -if ARCH_S5PC1XX source "arch/arm/mach-s5pc100/Kconfig" -endif source "arch/arm/mach-s5pv210/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 9505a70bfc0a..f7cb6d495484 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -167,7 +167,7 @@ machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx machine-$(CONFIG_ARCH_S5P6440) := s5p6440 machine-$(CONFIG_ARCH_S5P6442) := s5p6442 -machine-$(CONFIG_ARCH_S5PC1XX) := s5pc100 +machine-$(CONFIG_ARCH_S5PC100) := s5pc100 machine-$(CONFIG_ARCH_S5PV210) := s5pv210 machine-$(CONFIG_ARCH_SA1100) := sa1100 machine-$(CONFIG_ARCH_SHARK) := shark @@ -192,7 +192,6 @@ plat-$(CONFIG_PLAT_NOMADIK) := nomadik plat-$(CONFIG_PLAT_ORION) := orion plat-$(CONFIG_PLAT_PXA) := pxa plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung -plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx samsung plat-$(CONFIG_PLAT_S5P) := s5p samsung ifeq ($(CONFIG_ARCH_EBSA110),y) diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 69e9fbfea917..1f2f412b0200 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -90,6 +90,7 @@ config MACH_SMDK6410 select S3C_DEV_HSMMC1 select S3C_DEV_I2C1 select S3C_DEV_FB + select SAMSUNG_DEV_TS select S3C_DEV_USB_HOST select S3C_DEV_USB_HSOTG select S3C64XX_SETUP_SDHCI diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 9d51455feb31..d0c6e9bdc686 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -64,6 +64,8 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/adc.h> +#include <plat/ts.h> #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB @@ -262,6 +264,8 @@ static struct platform_device *smdk6410_devices[] __initdata = { &smdk6410_lcd_powerdev, &smdk6410_smsc911x, + &s3c_device_adc, + &s3c_device_ts, }; #ifdef CONFIG_REGULATOR @@ -596,6 +600,12 @@ static struct i2c_board_info i2c_devs1[] __initdata = { { I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */ }; +static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, +}; + static void __init smdk6410_map_io(void) { u32 tmp; @@ -625,6 +635,8 @@ static void __init smdk6410_machine_init(void) s3c_i2c1_set_platdata(NULL); s3c_fb_set_platdata(&smdk6410_lcd_pdata); + s3c24xx_ts_set_platdata(&s3c_ts_platform); + /* configure nCS1 width to 16 bits */ cs1 = __raw_readl(S3C64XX_SROM_BW) & diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig index 77aeffd17330..ef00cb716cba 100644 --- a/arch/arm/mach-s5p6440/Kconfig +++ b/arch/arm/mach-s5p6440/Kconfig @@ -16,6 +16,8 @@ config CPU_S5P6440 config MACH_SMDK6440 bool "SMDK6440" select CPU_S5P6440 + select SAMSUNG_DEV_TS + select SAMSUNG_DEV_ADC help Machine support for the Samsung SMDK6440 diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c index ca3b3206e6f8..b2fe6a58155a 100644 --- a/arch/arm/mach-s5p6440/cpu.c +++ b/arch/arm/mach-s5p6440/cpu.c @@ -61,6 +61,7 @@ static void s5p6440_idle(void) void __init s5p6440_map_io(void) { /* initialize any device information early */ + s3c_device_adc.name = "s3c64xx-adc"; } void __init s5p6440_init_clocks(int xtal) diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h index 8246895d3977..d0124f39a988 100644 --- a/arch/arm/mach-s5p6440/include/mach/map.h +++ b/arch/arm/mach-s5p6440/include/mach/map.h @@ -72,8 +72,11 @@ /* PCM */ #define S5P6440_PA_PCM 0xF2100000 +#define S5P6440_PA_ADC (0xF3000000) + /* compatibiltiy defines. */ #define S3C_PA_UART S5P6440_PA_UART #define S3C_PA_IIC S5P6440_PA_IIC0 +#define SAMSUNG_PA_ADC S5P6440_PA_ADC #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p6440/mach-smdk6440.c index d7fede971ca6..f9948174ba4e 100644 --- a/arch/arm/mach-s5p6440/mach-smdk6440.c +++ b/arch/arm/mach-s5p6440/mach-smdk6440.c @@ -38,6 +38,8 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/pll.h> +#include <plat/adc.h> +#include <plat/ts.h> #define S5P6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -85,6 +87,14 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { static struct platform_device *smdk6440_devices[] __initdata = { &s5p6440_device_iis, + &s3c_device_adc, + &s3c_device_ts, +}; + +static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, }; static void __init smdk6440_map_io(void) @@ -96,6 +106,8 @@ static void __init smdk6440_map_io(void) static void __init smdk6440_machine_init(void) { + s3c24xx_ts_set_platdata(&s3c_ts_platform); + platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices)); } diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index 8593337784e1..2eb949771dbc 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -5,10 +5,12 @@ # Configuration options for the S5PC100 CPU +if ARCH_S5PC100 + config CPU_S5PC100 bool - select CPU_S5PC100_INIT - select CPU_S5PC100_CLOCK + select PLAT_S5P + select S5P_EXT_INT help Enable S5PC100 CPU support @@ -17,17 +19,22 @@ config S5PC100_SETUP_FB_24BPP help Common setup code for S5PC1XX with an 24bpp RGB display helper. -config S5PC100_SETUP_SDHCI - bool - select S5PC1XX_SETUP_SDHCI_GPIO - help - Internal helper functions for S5PC100 based SDHCI systems - config S5PC100_SETUP_I2C1 bool help Common setup code for i2c bus 1. +config S5PC100_SETUP_SDHCI + bool + select S5PC100_SETUP_SDHCI_GPIO + help + Internal helper functions for S5PC100 based SDHCI systems + +config S5PC100_SETUP_SDHCI_GPIO + bool + help + Common setup code for SDHCI gpio. + config MACH_SMDKC100 bool "SMDKC100" select CPU_S5PC100 @@ -41,3 +48,5 @@ config MACH_SMDKC100 select S5PC100_SETUP_SDHCI help Machine support for the Samsung SMDKC100 + +endif diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile index 65a2911b4c7d..e1081a9b19c8 100644 --- a/arch/arm/mach-s5pc100/Makefile +++ b/arch/arm/mach-s5pc100/Makefile @@ -11,18 +11,23 @@ obj- := # Core support for S5PC100 system -obj-$(CONFIG_CPU_S5PC100) += cpu.o gpiolib.o +obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o gpiolib.o irq-gpio.o obj-$(CONFIG_CPU_S5PC100) += setup-i2c0.o # Helper and device support obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o -obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o +obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o +obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o # device support obj-y += dev-audio.o obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o # machine support + obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o + +# device support +obj-y += dev-audio.o diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c index d79e7574a852..d424a9fda034 100644 --- a/arch/arm/mach-s5pc100/cpu.c +++ b/arch/arm/mach-s5pc100/cpu.c @@ -22,47 +22,53 @@ #include <linux/serial_core.h> #include <linux/platform_device.h> -#include <asm/proc-fns.h> - #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> +#include <asm/proc-fns.h> + #include <mach/hardware.h> #include <mach/map.h> #include <asm/irq.h> -#include <plat/cpu-freq.h> #include <plat/regs-serial.h> -#include <plat/regs-power.h> +#include <mach/regs-clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/clock.h> -#include <plat/sdhci.h> #include <plat/iic-core.h> +#include <plat/sdhci.h> #include <plat/s5pc100.h> /* Initial IO mappings */ static struct map_desc s5pc100_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSTIMER, + .pfn = __phys_to_pfn(S5PC100_PA_SYSTIMER), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC2, + .pfn = __phys_to_pfn(S5PC100_PA_VIC2), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5PC100_VA_OTHERS, + .pfn = __phys_to_pfn(S5PC100_PA_OTHERS), + .length = SZ_4K, + .type = MT_DEVICE, + } }; static void s5pc100_idle(void) { - unsigned long tmp; - - tmp = __raw_readl(S5PC100_PWR_CFG); - tmp &= ~S5PC100_PWRCFG_CFG_DEEP_IDLE; - tmp &= ~S5PC100_PWRCFG_CFG_WFI_MASK; - tmp |= S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE; - __raw_writel(tmp, S5PC100_PWR_CFG); + if (!need_resched()) + cpu_do_idle(); - tmp = __raw_readl(S5PC100_OTHERS); - tmp |= S5PC100_PMU_INT_DISABLE; - __raw_writel(tmp, S5PC100_OTHERS); - - cpu_do_idle(); + local_irq_enable(); } /* s5pc100_map_io @@ -86,22 +92,23 @@ void __init s5pc100_map_io(void) void __init s5pc100_init_clocks(int xtal) { - printk(KERN_DEBUG "%s: initialising clocks\n", __func__); + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + s3c24xx_register_baseclocks(xtal); - s5pc1xx_register_clocks(); + s5p_register_clocks(xtal); s5pc100_register_clocks(); s5pc100_setup_clocks(); } void __init s5pc100_init_irq(void) { - u32 vic_valid[] = {~0, ~0, ~0}; + u32 vic[] = {~0, ~0, ~0}; /* VIC0, VIC1, and VIC2 are fully populated. */ - s5pc1xx_init_irq(vic_valid, ARRAY_SIZE(vic_valid)); + s5p_init_irq(vic, ARRAY_SIZE(vic)); } -struct sysdev_class s5pc100_sysclass = { +static struct sysdev_class s5pc100_sysclass = { .name = "s5pc100-core", }; @@ -118,9 +125,10 @@ core_initcall(s5pc100_core_init); int __init s5pc100_init(void) { - printk(KERN_DEBUG "S5PC100: Initialising architecture\n"); + printk(KERN_INFO "S5PC100: Initializing architecture\n"); - s5pc1xx_idle = s5pc100_idle; + /* set idle function */ + pm_idle = s5pc100_idle; return sysdev_register(&s5pc100_sysdev); } diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c new file mode 100644 index 000000000000..18cfe9ae1936 --- /dev/null +++ b/arch/arm/mach-s5pc100/dev-audio.c @@ -0,0 +1,287 @@ +/* linux/arch/arm/mach-s5pc100/dev-audio.c + * + * Copyright (c) 2010 Samsung Electronics Co. Ltd + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <plat/gpio-cfg.h> +#include <plat/audio.h> + +#include <mach/gpio.h> +#include <mach/map.h> +#include <mach/dma.h> +#include <mach/irqs.h> + +static int s5pc100_cfg_i2s(struct platform_device *pdev) +{ + /* configure GPIO for i2s port */ + switch (pdev->id) { + case 1: + s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(2)); + break; + + case 2: + s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(4)); + break; + + case -1: /* Dedicated pins */ + break; + + default: + printk(KERN_ERR "Invalid Device %d\n", pdev->id); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s3c_i2s_pdata = { + .cfg_gpio = s5pc100_cfg_i2s, +}; + +static struct resource s5pc100_iis0_resource[] = { + [0] = { + .start = S5PC100_PA_I2S0, + .end = S5PC100_PA_I2S0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S0_TX, + .end = DMACH_I2S0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S0_RX, + .end = DMACH_I2S0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pc100_device_iis0 = { + .name = "s3c64xx-iis-v4", + .id = -1, + .num_resources = ARRAY_SIZE(s5pc100_iis0_resource), + .resource = s5pc100_iis0_resource, + .dev = { + .platform_data = &s3c_i2s_pdata, + }, +}; + +static struct resource s5pc100_iis1_resource[] = { + [0] = { + .start = S5PC100_PA_I2S1, + .end = S5PC100_PA_I2S1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S1_TX, + .end = DMACH_I2S1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S1_RX, + .end = DMACH_I2S1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pc100_device_iis1 = { + .name = "s3c64xx-iis", + .id = 1, + .num_resources = ARRAY_SIZE(s5pc100_iis1_resource), + .resource = s5pc100_iis1_resource, + .dev = { + .platform_data = &s3c_i2s_pdata, + }, +}; + +static struct resource s5pc100_iis2_resource[] = { + [0] = { + .start = S5PC100_PA_I2S2, + .end = S5PC100_PA_I2S2 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S2_TX, + .end = DMACH_I2S2_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S2_RX, + .end = DMACH_I2S2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pc100_device_iis2 = { + .name = "s3c64xx-iis", + .id = 2, + .num_resources = ARRAY_SIZE(s5pc100_iis2_resource), + .resource = s5pc100_iis2_resource, + .dev = { + .platform_data = &s3c_i2s_pdata, + }, +}; + +/* PCM Controller platform_devices */ + +static int s5pc100_pcm_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(5)); + break; + + case 1: + s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(3)); + break; + + default: + printk(KERN_DEBUG "Invalid PCM Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s3c_pcm_pdata = { + .cfg_gpio = s5pc100_pcm_cfg_gpio, +}; + +static struct resource s5pc100_pcm0_resource[] = { + [0] = { + .start = S5PC100_PA_PCM0, + .end = S5PC100_PA_PCM0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM0_TX, + .end = DMACH_PCM0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM0_RX, + .end = DMACH_PCM0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pc100_device_pcm0 = { + .name = "samsung-pcm", + .id = 0, + .num_resources = ARRAY_SIZE(s5pc100_pcm0_resource), + .resource = s5pc100_pcm0_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; + +static struct resource s5pc100_pcm1_resource[] = { + [0] = { + .start = S5PC100_PA_PCM1, + .end = S5PC100_PA_PCM1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM1_TX, + .end = DMACH_PCM1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM1_RX, + .end = DMACH_PCM1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pc100_device_pcm1 = { + .name = "samsung-pcm", + .id = 1, + .num_resources = ARRAY_SIZE(s5pc100_pcm1_resource), + .resource = s5pc100_pcm1_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; + +/* AC97 Controller platform devices */ + +static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev) +{ + s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(4)); + + return 0; +} + +static struct resource s5pc100_ac97_resource[] = { + [0] = { + .start = S5PC100_PA_AC97, + .end = S5PC100_PA_AC97 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_AC97_PCMOUT, + .end = DMACH_AC97_PCMOUT, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_AC97_PCMIN, + .end = DMACH_AC97_PCMIN, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DMACH_AC97_MICIN, + .end = DMACH_AC97_MICIN, + .flags = IORESOURCE_DMA, + }, + [4] = { + .start = IRQ_AC97, + .end = IRQ_AC97, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c_audio_pdata s3c_ac97_pdata = { + .cfg_gpio = s5pc100_ac97_cfg_gpio, +}; + +static u64 s5pc100_ac97_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5pc100_device_ac97 = { + .name = "s3c-ac97", + .id = -1, + .num_resources = ARRAY_SIZE(s5pc100_ac97_resource), + .resource = s5pc100_ac97_resource, + .dev = { + .platform_data = &s3c_ac97_pdata, + .dma_mask = &s5pc100_ac97_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; diff --git a/arch/arm/mach-s5pc100/gpiolib.c b/arch/arm/mach-s5pc100/gpiolib.c index c8e8336a3a12..0fab7f2cd8bf 100644 --- a/arch/arm/mach-s5pc100/gpiolib.c +++ b/arch/arm/mach-s5pc100/gpiolib.c @@ -1,10 +1,10 @@ /* - * arch/arm/plat-s5pc1xx/gpiolib.c + * arch/arm/plat-s5pc100/gpiolib.c * * Copyright 2009 Samsung Electronics Co * Kyungmin Park <kyungmin.park@samsung.com> * - * S5PC1XX - GPIOlib support + * S5PC100 - GPIOlib support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -61,13 +61,12 @@ * L3 8 4Bit None */ -#if 0 -static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) +static int s5pc100_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) { return S3C_IRQ_GPIO(chip->base + offset); } -static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset) +static int s5pc100_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset) { int base; @@ -85,7 +84,7 @@ static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset) return IRQ_EINT(24 + offset); return -EINVAL; } -#endif + static struct s3c_gpio_cfg gpio_cfg = { .set_config = s3c_gpio_setcfg_s3c64xx_4bit, .set_pull = s3c_gpio_setpull_updown, @@ -382,31 +381,30 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = { }; /* FIXME move from irq-gpio.c */ -extern struct irq_chip s5pc1xx_gpioint; -extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc); +extern struct irq_chip s5pc100_gpioint; +extern void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc); static __init void s5pc100_gpiolib_link(struct s3c_gpio_chip *chip) { -#if 0 /* Interrupt */ if (chip->config == &gpio_cfg) { int i, irq; - chip->chip.to_irq = s5pc1xx_gpiolib_to_irq; + chip->chip.to_irq = s5pc100_gpiolib_to_irq; for (i = 0; i < chip->chip.ngpio; i++) { irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i; - set_irq_chip(irq, &s5pc1xx_gpioint); + set_irq_chip(irq, &s5pc100_gpioint); set_irq_data(irq, &chip->chip); set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } - } else if (chip->config == &gpio_cfg_eint) - chip->chip.to_irq = s5pc1xx_gpiolib_to_eint; -#endif + } else if (chip->config == &gpio_cfg_eint) { + chip->chip.to_irq = s5pc100_gpiolib_to_eint; + } } -static __init int s5pc1xx_gpiolib_init(void) +static __init int s5pc100_gpiolib_init(void) { struct s3c_gpio_chip *chip; int nr_chips; @@ -419,10 +417,10 @@ static __init int s5pc1xx_gpiolib_init(void) samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, ARRAY_SIZE(s5pc100_gpio_chips)); -#if 0 + /* Interrupt */ - set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler); -#endif + set_irq_chained_handler(IRQ_GPIOINT, s5pc100_irq_gpioint_handler); + return 0; } -core_initcall(s5pc1xx_gpiolib_init); +core_initcall(s5pc100_gpiolib_init); diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S index e181f5789482..70e02e91ee3c 100644 --- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S @@ -22,12 +22,14 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rx, tmp + .macro addruart, rx, rtmp mrc p15, 0, \rx, c1, c0 tst \rx, #1 ldreq \rx, = S3C_PA_UART - ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) + ldrne \rx, = S3C_VA_UART +#if CONFIG_DEBUG_S3C_UART != 0 add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) +#endif .endm /* include the reset of the code which will do the work, we're only diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S index 67131939e626..ba76af052c81 100644 --- a/arch/arm/mach-s5pc100/include/mach/entry-macro.S +++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S @@ -20,7 +20,7 @@ .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =S3C_VA_VIC0 + ldr \base, =VA_VIC0 .endm .macro arch_ret_to_user, tmp1, tmp2 @@ -29,18 +29,18 @@ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp @ check the vic0 - mov \irqnr, # S3C_IRQ_OFFSET + 31 + mov \irqnr, # S5P_IRQ_OFFSET + 31 ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] teq \irqstat, #0 @ otherwise try vic1 - addeq \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0) + addeq \tmp, \base, #(VA_VIC1 - VA_VIC0) addeq \irqnr, \irqnr, #32 ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] teqeq \irqstat, #0 @ otherwise try vic2 - addeq \tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0) + addeq \tmp, \base, #(VA_VIC2 - VA_VIC0) addeq \irqnr, \irqnr, #32 ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] teqeq \irqstat, #0 diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h index 29a8a12d9b4f..71ae1f52df1d 100644 --- a/arch/arm/mach-s5pc100/include/mach/gpio.h +++ b/arch/arm/mach-s5pc100/include/mach/gpio.h @@ -146,6 +146,13 @@ enum s5p_gpio_number { /* define the number of gpios we need to the one after the MP04() range */ #define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1) +#define EINT_MODE S3C_GPIO_SFN(0x2) + +#define EINT_GPIO_0(x) S5PC100_GPH0(x) +#define EINT_GPIO_1(x) S5PC100_GPH1(x) +#define EINT_GPIO_2(x) S5PC100_GPH2(x) +#define EINT_GPIO_3(x) S5PC100_GPH3(x) + #include <asm-generic/gpio.h> #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h index b53fa48a52c6..28aa551dc3a8 100644 --- a/arch/arm/mach-s5pc100/include/mach/irqs.h +++ b/arch/arm/mach-s5pc100/include/mach/irqs.h @@ -11,9 +11,104 @@ #include <plat/irqs.h> -/* LCD */ +/* VIC0: system, DMA, timer */ +#define IRQ_EINT16_31 S5P_IRQ_VIC0(16) +#define IRQ_BATF S5P_IRQ_VIC0(17) +#define IRQ_MDMA S5P_IRQ_VIC0(18) +#define IRQ_PDMA0 S5P_IRQ_VIC0(19) +#define IRQ_PDMA1 S5P_IRQ_VIC0(20) +#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21) +#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22) +#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23) +#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24) +#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25) +#define IRQ_SYSTIMER S5P_IRQ_VIC0(26) +#define IRQ_WDT S5P_IRQ_VIC0(27) +#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28) +#define IRQ_RTC_TIC S5P_IRQ_VIC0(29) +#define IRQ_GPIOINT S5P_IRQ_VIC0(30) + +/* VIC1: ARM, power, memory, connectivity */ +#define IRQ_CORTEX0 S5P_IRQ_VIC1(0) +#define IRQ_CORTEX1 S5P_IRQ_VIC1(1) +#define IRQ_CORTEX2 S5P_IRQ_VIC1(2) +#define IRQ_CORTEX3 S5P_IRQ_VIC1(3) +#define IRQ_CORTEX4 S5P_IRQ_VIC1(4) +#define IRQ_IEMAPC S5P_IRQ_VIC1(5) +#define IRQ_IEMIEC S5P_IRQ_VIC1(6) +#define IRQ_ONENAND S5P_IRQ_VIC1(7) +#define IRQ_NFC S5P_IRQ_VIC1(8) +#define IRQ_CFC S5P_IRQ_VIC1(9) +#define IRQ_UART0 S5P_IRQ_VIC1(10) +#define IRQ_UART1 S5P_IRQ_VIC1(11) +#define IRQ_UART2 S5P_IRQ_VIC1(12) +#define IRQ_UART3 S5P_IRQ_VIC1(13) +#define IRQ_IIC S5P_IRQ_VIC1(14) +#define IRQ_SPI0 S5P_IRQ_VIC1(15) +#define IRQ_SPI1 S5P_IRQ_VIC1(16) +#define IRQ_SPI2 S5P_IRQ_VIC1(17) +#define IRQ_IRDA S5P_IRQ_VIC1(18) +#define IRQ_CAN0 S5P_IRQ_VIC1(19) +#define IRQ_CAN1 S5P_IRQ_VIC1(20) +#define IRQ_HSIRX S5P_IRQ_VIC1(21) +#define IRQ_HSITX S5P_IRQ_VIC1(22) +#define IRQ_UHOST S5P_IRQ_VIC1(23) +#define IRQ_OTG S5P_IRQ_VIC1(24) +#define IRQ_MSM S5P_IRQ_VIC1(25) +#define IRQ_HSMMC0 S5P_IRQ_VIC1(26) +#define IRQ_HSMMC1 S5P_IRQ_VIC1(27) +#define IRQ_HSMMC2 S5P_IRQ_VIC1(28) +#define IRQ_MIPICSI S5P_IRQ_VIC1(29) +#define IRQ_MIPIDSI S5P_IRQ_VIC1(30) + +/* VIC2: multimedia, audio, security */ +#define IRQ_LCD0 S5P_IRQ_VIC2(0) +#define IRQ_LCD1 S5P_IRQ_VIC2(1) +#define IRQ_LCD2 S5P_IRQ_VIC2(2) +#define IRQ_LCD3 S5P_IRQ_VIC2(3) +#define IRQ_ROTATOR S5P_IRQ_VIC2(4) +#define IRQ_FIMC0 S5P_IRQ_VIC2(5) +#define IRQ_FIMC1 S5P_IRQ_VIC2(6) +#define IRQ_FIMC2 S5P_IRQ_VIC2(7) +#define IRQ_JPEG S5P_IRQ_VIC2(8) +#define IRQ_2D S5P_IRQ_VIC2(9) +#define IRQ_3D S5P_IRQ_VIC2(10) +#define IRQ_MIXER S5P_IRQ_VIC2(11) +#define IRQ_HDMI S5P_IRQ_VIC2(12) +#define IRQ_IIC1 S5P_IRQ_VIC2(13) +#define IRQ_MFC S5P_IRQ_VIC2(14) +#define IRQ_TVENC S5P_IRQ_VIC2(15) +#define IRQ_I2S0 S5P_IRQ_VIC2(16) +#define IRQ_I2S1 S5P_IRQ_VIC2(17) +#define IRQ_I2S2 S5P_IRQ_VIC2(18) +#define IRQ_AC97 S5P_IRQ_VIC2(19) +#define IRQ_PCM0 S5P_IRQ_VIC2(20) +#define IRQ_PCM1 S5P_IRQ_VIC2(21) +#define IRQ_SPDIF S5P_IRQ_VIC2(22) +#define IRQ_ADC S5P_IRQ_VIC2(23) +#define IRQ_PENDN S5P_IRQ_VIC2(24) +#define IRQ_TC IRQ_PENDN +#define IRQ_KEYPAD S5P_IRQ_VIC2(25) +#define IRQ_CG S5P_IRQ_VIC2(26) +#define IRQ_SEC S5P_IRQ_VIC2(27) +#define IRQ_SECRX S5P_IRQ_VIC2(28) +#define IRQ_SECTX S5P_IRQ_VIC2(29) +#define IRQ_SDMIRQ S5P_IRQ_VIC2(30) +#define IRQ_SDMFIQ S5P_IRQ_VIC2(31) +#define IRQ_VIC_END S5P_IRQ_VIC2(31) + +#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) +#define S5P_EINT_BASE2 (IRQ_VIC_END + 1) + +#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1) +#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x)) + +/* Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs */ +#define NR_IRQS (S3C_IRQ_GPIO(320) + 1) + +/* Compatibility */ #define IRQ_LCD_FIFO IRQ_LCD0 #define IRQ_LCD_VSYNC IRQ_LCD1 #define IRQ_LCD_SYSTEM IRQ_LCD2 -#endif /* __ASM_ARCH_IRQ_H */ +#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h index 5ff7931c5362..88009549ab28 100644 --- a/arch/arm/mach-s5pc100/include/mach/map.h +++ b/arch/arm/mach-s5pc100/include/mach/map.h @@ -3,9 +3,7 @@ * Copyright 2009 Samsung Electronics Co. * Byungho Min <bhmin@samsung.com> * - * Based on mach-s3c6400/include/mach/map.h - * - * S5PC1XX - Memory map definitions + * S5PC100 - Memory map definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,71 +14,44 @@ #define __ASM_ARCH_MAP_H __FILE__ #include <plat/map-base.h> +#include <plat/map-s5p.h> -/* - * map-base.h has already defined virtual memory address - * S3C_VA_IRQ S3C_ADDR(0x00000000) irq controller(s) - * S3C_VA_SYS S3C_ADDR(0x00100000) system control - * S3C_VA_MEM S3C_ADDR(0x00200000) system control (not used) - * S3C_VA_TIMER S3C_ADDR(0x00300000) timer block - * S3C_VA_WATCHDOG S3C_ADDR(0x00400000) watchdog - * S3C_VA_UART S3C_ADDR(0x01000000) UART - * - * S5PC100 specific virtual memory address can be defined here - * S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) GPIO - * - */ - -/* Chip ID */ #define S5PC100_PA_CHIPID (0xE0000000) -#define S5PC1XX_PA_CHIPID S5PC100_PA_CHIPID -#define S5PC1XX_VA_CHIPID S3C_VA_SYS - -/* System */ -#define S5PC100_PA_CLK (0xE0100000) -#define S5PC100_PA_CLK_OTHER (0xE0200000) -#define S5PC100_PA_PWR (0xE0108000) -#define S5PC1XX_PA_CLK S5PC100_PA_CLK -#define S5PC1XX_PA_PWR S5PC100_PA_PWR -#define S5PC1XX_PA_CLK_OTHER S5PC100_PA_CLK_OTHER -#define S5PC1XX_VA_CLK (S3C_VA_SYS + 0x10000) -#define S5PC1XX_VA_PWR (S3C_VA_SYS + 0x20000) -#define S5PC1XX_VA_CLK_OTHER (S3C_VA_SYS + 0x30000) - -/* GPIO */ +#define S5P_PA_CHIPID S5PC100_PA_CHIPID + +#define S5PC100_PA_SYSCON (0xE0100000) +#define S5P_PA_SYSCON S5PC100_PA_SYSCON + +#define S5PC100_PA_OTHERS (0xE0200000) +#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000) + #define S5PC100_PA_GPIO (0xE0300000) -#define S5PC1XX_PA_GPIO S5PC100_PA_GPIO -#define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) - -/* Interrupt */ -#define S5PC100_PA_VIC (0xE4000000) -#define S5PC100_VA_VIC S3C_VA_IRQ -#define S5PC100_PA_VIC_OFFSET 0x100000 -#define S5PC100_VA_VIC_OFFSET 0x10000 -#define S5PC1XX_PA_VIC(x) (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET)) -#define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET)) - -/* DMA */ -#define S5PC100_PA_MDMA (0xE8100000) -#define S5PC100_PA_PDMA0 (0xE9000000) -#define S5PC100_PA_PDMA1 (0xE9200000) - -/* Timer */ +#define S5P_PA_GPIO S5PC100_PA_GPIO + +#define S5PC100_PA_VIC0 (0xE4000000) +#define S5P_PA_VIC0 S5PC100_PA_VIC0 + +#define S5PC100_PA_VIC1 (0xE4100000) +#define S5P_PA_VIC1 S5PC100_PA_VIC1 + +#define S5PC100_PA_VIC2 (0xE4200000) +#define S5P_PA_VIC2 S5PC100_PA_VIC2 + #define S5PC100_PA_TIMER (0xEA000000) -#define S5PC1XX_PA_TIMER S5PC100_PA_TIMER -#define S5PC1XX_VA_TIMER S3C_VA_TIMER +#define S5P_PA_TIMER S5PC100_PA_TIMER -/* RTC */ -#define S5PC100_PA_RTC (0xEA300000) +#define S5PC100_PA_SYSTIMER (0xEA100000) -/* UART */ #define S5PC100_PA_UART (0xEC000000) -#define S5PC1XX_PA_UART S5PC100_PA_UART -#define S5PC1XX_VA_UART S3C_VA_UART -/* I2C */ -#define S5PC100_PA_I2C (0xEC100000) -#define S5PC100_PA_I2C1 (0xEC200000) +#define S5P_PA_UART0 (S5PC100_PA_UART + 0x0) +#define S5P_PA_UART1 (S5PC100_PA_UART + 0x400) +#define S5P_PA_UART2 (S5PC100_PA_UART + 0x800) +#define S5P_PA_UART3 (S5PC100_PA_UART + 0xC00) +#define S5P_SZ_UART SZ_256 + +#define S5PC100_PA_IIC0 (0xEC100000) +#define S5PC100_PA_IIC1 (0xEC200000) /* SPI */ #define S5PC100_PA_SPI0 0xEC300000 @@ -91,65 +62,29 @@ #define S5PC100_PA_USB_HSOTG (0xED200000) #define S5PC100_PA_USB_HSPHY (0xED300000) -/* SD/MMC */ -#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) -#define S5PC100_PA_HSMMC0 S5PC100_PA_HSMMC(0) -#define S5PC100_PA_HSMMC1 S5PC100_PA_HSMMC(1) -#define S5PC100_PA_HSMMC2 S5PC100_PA_HSMMC(2) - -/* LCD */ #define S5PC100_PA_FB (0xEE000000) -/* Multimedia */ -#define S5PC100_PA_G2D (0xEE800000) -#define S5PC100_PA_JPEG (0xEE500000) -#define S5PC100_PA_ROTATOR (0xEE100000) -#define S5PC100_PA_G3D (0xEF000000) +#define S5PC100_PA_AC97 0xF2300000 -/* I2S */ -#define S5PC100_PA_I2S0 (0xF2000000) -#define S5PC100_PA_I2S1 (0xF2100000) -#define S5PC100_PA_I2S2 (0xF2200000) +/* PCM */ +#define S5PC100_PA_PCM0 0xF2400000 +#define S5PC100_PA_PCM1 0xF2500000 /* KEYPAD */ #define S5PC100_PA_KEYPAD (0xF3100000) -/* ADC & TouchScreen */ -#define S5PC100_PA_TSADC (0xF3000000) +#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) -/* ETC */ #define S5PC100_PA_SDRAM (0x20000000) -#define S5PC1XX_PA_SDRAM S5PC100_PA_SDRAM +#define S5P_PA_SDRAM S5PC100_PA_SDRAM -/* compatibility defines. */ -#define S3C_PA_RTC S5PC100_PA_RTC +/* compatibiltiy defines. */ #define S3C_PA_UART S5PC100_PA_UART -#define S3C_PA_UART0 (S5PC100_PA_UART + 0x0) -#define S3C_PA_UART1 (S5PC100_PA_UART + 0x400) -#define S3C_PA_UART2 (S5PC100_PA_UART + 0x800) -#define S3C_PA_UART3 (S5PC100_PA_UART + 0xC00) -#define S3C_VA_UART0 (S3C_VA_UART + 0x0) -#define S3C_VA_UART1 (S3C_VA_UART + 0x400) -#define S3C_VA_UART2 (S3C_VA_UART + 0x800) -#define S3C_VA_UART3 (S3C_VA_UART + 0xC00) -#define S3C_UART_OFFSET 0x400 -#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) +#define S3C_PA_IIC S5PC100_PA_IIC0 +#define S3C_PA_IIC1 S5PC100_PA_IIC1 #define S3C_PA_FB S5PC100_PA_FB -#define S3C_PA_G2D S5PC100_PA_G2D -#define S3C_PA_G3D S5PC100_PA_G3D -#define S3C_PA_JPEG S5PC100_PA_JPEG -#define S3C_PA_ROTATOR S5PC100_PA_ROTATOR -#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x0) -#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000) -#define S3C_VA_VIC2 (S3C_VA_IRQ + 0x20000) -#define S3C_PA_IIC S5PC100_PA_I2C -#define S3C_PA_IIC1 S5PC100_PA_I2C1 -#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG -#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY -#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC0 -#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC1 -#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC2 -#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD -#define S3C_PA_TSADC S5PC100_PA_TSADC - -#endif /* __ASM_ARCH_C100_MAP_H */ +#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0) +#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1) +#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2) + +#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/regs-clock.h b/arch/arm/mach-s5pc100/include/mach/regs-clock.h index f2283bdc941e..5d27d286d504 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-clock.h @@ -17,6 +17,8 @@ #define S5P_CLKREG(x) (S3C_VA_SYS + (x)) +#define S5PC100_REG_OTHERS(x) (S5PC100_VA_OTHERS + (x)) + #define S5P_APLL_LOCK S5P_CLKREG(0x00) #define S5P_MPLL_LOCK S5P_CLKREG(0x04) #define S5P_EPLL_LOCK S5P_CLKREG(0x08) @@ -68,4 +70,8 @@ #define S5P_CLKDIV1_PCLKD1_MASK (0x7<<16) #define S5P_CLKDIV1_PCLKD1_SHIFT (16) +#define S5PC100_SWRESET S5PC100_REG_OTHERS(0x000) + +#define S5PC100_SWRESET_RESETVAL 0xc100 + #endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h index 68666913354c..dd6295e1251d 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h +/* linux/arch/arm/plat-s5pc100/include/plat/regs-gpio.h * * Copyright 2009 Samsung Electronics Co. * Byungho Min <bhmin@samsung.com> @@ -12,7 +12,7 @@ #include <mach/map.h> /* S5PC100 */ -#define S5PC100_GPIO_BASE S5PC1XX_VA_GPIO +#define S5PC100_GPIO_BASE S5P_VA_GPIO #define S5PC100_GPA0_BASE (S5PC100_GPIO_BASE + 0x0000) #define S5PC100_GPA1_BASE (S5PC100_GPIO_BASE + 0x0020) #define S5PC100_GPB_BASE (S5PC100_GPIO_BASE + 0x0040) @@ -47,24 +47,29 @@ #define S5PC100_GPL2_BASE (S5PC100_GPIO_BASE + 0x0360) #define S5PC100_GPL3_BASE (S5PC100_GPIO_BASE + 0x0380) #define S5PC100_GPL4_BASE (S5PC100_GPIO_BASE + 0x03A0) -#define S5PC100_EINT_BASE (S5PC100_GPIO_BASE + 0x0E00) -#define S5PC100_UHOST (S5PC100_GPIO_BASE + 0x0B68) -#define S5PC100_PDNEN (S5PC100_GPIO_BASE + 0x0F80) +#define S5PC100EINT30CON (S5P_VA_GPIO + 0xE00) +#define S5P_EINT_CON(x) (S5PC100EINT30CON + ((x) * 0x4)) -/* PDNEN */ -#define S5PC100_PDNEN_CFG_PDNEN (1 << 1) -#define S5PC100_PDNEN_CFG_AUTO (0 << 1) -#define S5PC100_PDNEN_POWERDOWN (1 << 0) -#define S5PC100_PDNEN_NORMAL (0 << 0) +#define S5PC100EINT30FLTCON0 (S5P_VA_GPIO + 0xE80) +#define S5P_EINT_FLTCON(x) (S5PC100EINT30FLTCON0 + ((x) * 0x4)) -/* Common part */ -/* External interrupt base is same at both s5pc100 and s5pc110 */ -#define S5PC1XX_EINT_BASE (S5PC100_EINT_BASE) +#define S5PC100EINT30MASK (S5P_VA_GPIO + 0xF00) +#define S5P_EINT_MASK(x) (S5PC100EINT30MASK + ((x) * 0x4)) -#define S5PC100_GPx_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S5PC100_GPx_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) -#define S5PC100_GPx_CONMASK(__gpio) (0xf << ((__gpio) * 4)) +#define S5PC100EINT30PEND (S5P_VA_GPIO + 0xF40) +#define S5P_EINT_PEND(x) (S5PC100EINT30PEND + ((x) * 0x4)) + +#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) + +#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) + +/* values for S5P_EXTINT0 */ +#define S5P_EXTINT_LOWLEV (0x00) +#define S5P_EXTINT_HILEV (0x01) +#define S5P_EXTINT_FALLEDGE (0x02) +#define S5P_EXTINT_RISEEDGE (0x03) +#define S5P_EXTINT_BOTHEDGE (0x04) #endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h index 751ac15438c8..4d9036d0f288 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-irq.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h @@ -3,7 +3,7 @@ * Copyright 2009 Samsung Electronics Co. * Byungho Min <bhmin@samsung.com> * - * S5PC1XX - IRQ register definitions + * S5PC100 - IRQ register definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,9 +16,4 @@ #include <mach/map.h> #include <asm/hardware/vic.h> -/* interrupt controller */ -#define S5PC1XX_VIC0REG(x) ((x) + S5PC1XX_VA_VIC(0)) -#define S5PC1XX_VIC1REG(x) ((x) + S5PC1XX_VA_VIC(1)) -#define S5PC1XX_VIC2REG(x) ((x) + S5PC1XX_VA_VIC(2)) - #endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h index f0d31a2a598c..681f626a9ae1 100644 --- a/arch/arm/mach-s5pc100/include/mach/system.h +++ b/arch/arm/mach-s5pc100/include/mach/system.h @@ -3,7 +3,7 @@ * Copyright 2009 Samsung Electronics Co. * Byungho Min <bhmin@samsung.com> * - * S5PC1XX - system implementation + * S5PC100 - system implementation * * Based on mach-s3c6400/include/mach/system.h */ @@ -13,14 +13,11 @@ #include <linux/io.h> #include <mach/map.h> -#include <plat/regs-clock.h> - -void (*s5pc1xx_idle)(void); +#include <mach/regs-clock.h> static void arch_idle(void) { - if (s5pc1xx_idle) - s5pc1xx_idle(); + /* nothing here yet */ } static void arch_reset(char mode, const char *cmd) diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h index f338c9eec717..20f68730ed18 100644 --- a/arch/arm/mach-s5pc100/include/mach/tick.h +++ b/arch/arm/mach-s5pc100/include/mach/tick.h @@ -20,8 +20,8 @@ */ static inline u32 s3c24xx_ostimer_pending(void) { - u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS); - return pend & 1 << (IRQ_TIMER4_VIC - S5PC1XX_IRQ_VIC0(0)); + u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); + return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0))); } #define TICK_MAX (0xffffffff) diff --git a/arch/arm/plat-s5pc1xx/s5pc100-init.c b/arch/arm/mach-s5pc100/init.c index c58710884ceb..19d7b523c137 100644 --- a/arch/arm/plat-s5pc1xx/s5pc100-init.c +++ b/arch/arm/mach-s5pc100/init.c @@ -1,9 +1,8 @@ -/* linux/arch/arm/plat-s5pc1xx/s5pc100-init.c +/* linux/arch/arm/plat-s5pc100/s5pc100-init.c * * Copyright 2009 Samsung Electronics Co. * Byungho Min <bhmin@samsung.com> * - * S5PC100 - CPU initialisation (common with other S5PC1XX chips) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,9 +18,7 @@ #include <plat/s5pc100.h> /* uart registration process */ - void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) { - /* The driver name is s3c6400-uart to reuse s3c6400_serial_drv */ - s3c24xx_init_uartdevs("s3c6400-uart", s5pc1xx_uart_resources, cfg, no); + s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); } diff --git a/arch/arm/plat-s5pc1xx/irq-gpio.c b/arch/arm/mach-s5pc100/irq-gpio.c index fecca7a679b0..2bf86c18bc73 100644 --- a/arch/arm/plat-s5pc1xx/irq-gpio.c +++ b/arch/arm/mach-s5pc100/irq-gpio.c @@ -1,9 +1,9 @@ /* - * arch/arm/plat-s5pc1xx/irq-gpio.c + * arch/arm/mach-s5pc100/irq-gpio.c * * Copyright (C) 2009 Samsung Electronics * - * S5PC1XX - Interrupt handling for IRQ_GPIO${group}(x) + * S5PC100 - Interrupt handling for IRQ_GPIO${group}(x) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,7 +19,7 @@ #include <mach/map.h> #include <plat/gpio-cfg.h> -#define S5PC1XX_GPIOREG(x) (S5PC1XX_VA_GPIO + (x)) +#define S5P_GPIOREG(x) (S5P_VA_GPIO + (x)) #define CON_OFFSET 0x700 #define MASK_OFFSET 0x900 @@ -49,7 +49,7 @@ static int group_to_pend_offset(int group) return group << 2; } -static int s5pc1xx_get_start(unsigned int group) +static int s5pc100_get_start(unsigned int group) { switch (group) { case 0: return S5PC100_GPIO_A0_START; @@ -80,7 +80,7 @@ static int s5pc1xx_get_start(unsigned int group) return -EINVAL; } -static int s5pc1xx_get_group(unsigned int irq) +static int s5pc100_get_group(unsigned int irq) { irq -= S3C_IRQ_GPIO(0); @@ -134,67 +134,67 @@ static int s5pc1xx_get_group(unsigned int irq) return -EINVAL; } -static int s5pc1xx_get_offset(unsigned int irq) +static int s5pc100_get_offset(unsigned int irq) { struct gpio_chip *chip = get_irq_data(irq); return irq - S3C_IRQ_GPIO(chip->base); } -static void s5pc1xx_gpioint_ack(unsigned int irq) +static void s5pc100_gpioint_ack(unsigned int irq) { int group, offset, pend_offset; unsigned int value; - group = s5pc1xx_get_group(irq); - offset = s5pc1xx_get_offset(irq); + group = s5pc100_get_group(irq); + offset = s5pc100_get_offset(irq); pend_offset = group_to_pend_offset(group); - value = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset); + value = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset); value |= 1 << offset; - __raw_writel(value, S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset); + __raw_writel(value, S5P_GPIOREG(PEND_OFFSET) + pend_offset); } -static void s5pc1xx_gpioint_mask(unsigned int irq) +static void s5pc100_gpioint_mask(unsigned int irq) { int group, offset, mask_offset; unsigned int value; - group = s5pc1xx_get_group(irq); - offset = s5pc1xx_get_offset(irq); + group = s5pc100_get_group(irq); + offset = s5pc100_get_offset(irq); mask_offset = group_to_mask_offset(group); - value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset); + value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset); value |= 1 << offset; - __raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset); + __raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset); } -static void s5pc1xx_gpioint_unmask(unsigned int irq) +static void s5pc100_gpioint_unmask(unsigned int irq) { int group, offset, mask_offset; unsigned int value; - group = s5pc1xx_get_group(irq); - offset = s5pc1xx_get_offset(irq); + group = s5pc100_get_group(irq); + offset = s5pc100_get_offset(irq); mask_offset = group_to_mask_offset(group); - value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset); + value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset); value &= ~(1 << offset); - __raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset); + __raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset); } -static void s5pc1xx_gpioint_mask_ack(unsigned int irq) +static void s5pc100_gpioint_mask_ack(unsigned int irq) { - s5pc1xx_gpioint_mask(irq); - s5pc1xx_gpioint_ack(irq); + s5pc100_gpioint_mask(irq); + s5pc100_gpioint_ack(irq); } -static int s5pc1xx_gpioint_set_type(unsigned int irq, unsigned int type) +static int s5pc100_gpioint_set_type(unsigned int irq, unsigned int type) { int group, offset, con_offset; unsigned int value; - group = s5pc1xx_get_group(irq); - offset = s5pc1xx_get_offset(irq); + group = s5pc100_get_group(irq); + offset = s5pc100_get_offset(irq); con_offset = group_to_con_offset(group); switch (type) { @@ -221,24 +221,24 @@ static int s5pc1xx_gpioint_set_type(unsigned int irq, unsigned int type) } - value = __raw_readl(S5PC1XX_GPIOREG(CON_OFFSET) + con_offset); + value = __raw_readl(S5P_GPIOREG(CON_OFFSET) + con_offset); value &= ~(0xf << (offset * 0x4)); value |= (type << (offset * 0x4)); - __raw_writel(value, S5PC1XX_GPIOREG(CON_OFFSET) + con_offset); + __raw_writel(value, S5P_GPIOREG(CON_OFFSET) + con_offset); return 0; } -struct irq_chip s5pc1xx_gpioint = { +struct irq_chip s5pc100_gpioint = { .name = "GPIO", - .ack = s5pc1xx_gpioint_ack, - .mask = s5pc1xx_gpioint_mask, - .mask_ack = s5pc1xx_gpioint_mask_ack, - .unmask = s5pc1xx_gpioint_unmask, - .set_type = s5pc1xx_gpioint_set_type, + .ack = s5pc100_gpioint_ack, + .mask = s5pc100_gpioint_mask, + .mask_ack = s5pc100_gpioint_mask_ack, + .unmask = s5pc100_gpioint_unmask, + .set_type = s5pc100_gpioint_set_type, }; -void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc) +void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc) { int group, offset, pend_offset, mask_offset; int real_irq, group_end; @@ -248,17 +248,17 @@ void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc) for (group = 0; group < group_end; group++) { pend_offset = group_to_pend_offset(group); - pend = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset); + pend = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset); if (!pend) continue; mask_offset = group_to_mask_offset(group); - mask = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset); + mask = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset); pend &= ~mask; for (offset = 0; offset < 8; offset++) { if (pend & (1 << offset)) { - real_irq = s5pc1xx_get_start(group) + offset; + real_irq = s5pc100_get_start(group) + offset; generic_handle_irq(S3C_IRQ_GPIO(real_irq)); } } diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index bfe67db34f04..af22f8202a07 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -43,38 +43,48 @@ #include <plat/fb.h> #include <plat/iic.h> -#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) -#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) -#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define S5PC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define S5PC100_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define S5PC100_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S3C2440_UFCON_RXTRIG8 | \ + S3C2440_UFCON_TXTRIG16) static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = { [0] = { .hwport = 0, .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, + .ucon = S5PC100_UCON_DEFAULT, + .ulcon = S5PC100_ULCON_DEFAULT, + .ufcon = S5PC100_UFCON_DEFAULT, }, [1] = { .hwport = 1, .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, + .ucon = S5PC100_UCON_DEFAULT, + .ulcon = S5PC100_ULCON_DEFAULT, + .ufcon = S5PC100_UFCON_DEFAULT, }, [2] = { .hwport = 2, .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, + .ucon = S5PC100_UCON_DEFAULT, + .ulcon = S5PC100_ULCON_DEFAULT, + .ufcon = S5PC100_UFCON_DEFAULT, }, [3] = { .hwport = 3, .flags = 0, - .ucon = 0x3c5, - .ulcon = 0x03, - .ufcon = 0x51, + .ucon = S5PC100_UCON_DEFAULT, + .ulcon = S5PC100_ULCON_DEFAULT, + .ufcon = S5PC100_UFCON_DEFAULT, }, }; @@ -118,8 +128,7 @@ static struct platform_device smdkc100_lcd_powerdev = { static struct s3c_fb_pd_win smdkc100_fb_win0 = { /* this is to ensure we use win0 */ .win_mode = { - .refresh = 70, - .pixclock = (8+13+3+800)*(7+5+1+480), + .pixclock = 1000000000000ULL / ((8+13+3+800)*(7+5+1+480)*80), .left_margin = 8, .right_margin = 13, .upper_margin = 7, @@ -140,8 +149,6 @@ static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = { .setup_gpio = s5pc100_fb_gpio_setup_24bpp, }; -static struct map_desc smdkc100_iodesc[] = {}; - static struct platform_device *smdkc100_devices[] __initdata = { &s3c_device_i2c0, &s3c_device_i2c1, @@ -150,11 +157,13 @@ static struct platform_device *smdkc100_devices[] __initdata = { &s3c_device_hsmmc1, &s3c_device_hsmmc2, &smdkc100_lcd_powerdev, + &s5pc100_device_iis0, + &s5pc100_device_ac97, }; static void __init smdkc100_map_io(void) { - s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc)); + s5p_init_io(NULL, 0, S5P_VA_CHIPID); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs)); } @@ -178,10 +187,9 @@ static void __init smdkc100_machine_init(void) MACHINE_START(SMDKC100, "SMDKC100") /* Maintainer: Byungho Min <bhmin@samsung.com> */ - .phys_io = S5PC100_PA_UART & 0xfff00000, - .io_pg_offst = (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc, - .boot_params = S5PC100_PA_SDRAM + 0x100, - + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S5P_PA_SDRAM + 0x100, .init_irq = s5pc100_init_irq, .map_io = smdkc100_map_io, .init_machine = smdkc100_machine_init, diff --git a/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c index 185c8941e644..7769c760c9ef 100644 --- a/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c @@ -1,8 +1,8 @@ -/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c +/* linux/arch/arm/plat-s5pc100/setup-sdhci-gpio.c * * Copyright 2009 Samsung Eletronics * - * S5PC1XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) + * S5PC100 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 7601c28e240b..88f81ce2f888 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -13,18 +13,61 @@ config CPU_S5PV210 bool select PLAT_S5P select S3C_PL330_DMA + select S5P_EXT_INT help Enable S5PV210 CPU support -choice - prompt "Select machine type" - depends on ARCH_S5PV210 - default MACH_SMDKV210 +config S5PV210_SETUP_I2C1 + bool + help + Common setup code for i2c bus 1. + +config S5PV210_SETUP_I2C2 + bool + help + Common setup code for i2c bus 2. + +config S5PV210_SETUP_FB_24BPP + bool + help + Common setup code for S5PV210 with an 24bpp RGB display helper. + +config S5PV210_SETUP_SDHCI + bool + select S5PV210_SETUP_SDHCI_GPIO + help + Internal helper functions for S5PV210 based SDHCI systems + +config S5PV210_SETUP_SDHCI_GPIO + bool + help + Common setup code for SDHCI gpio. + +# machine support + +config MACH_AQUILA + bool "Samsung Aquila" + select CPU_S5PV210 + select ARCH_SPARSEMEM_ENABLE + select S5PV210_SETUP_FB_24BPP + select S3C_DEV_FB + help + Machine support for the Samsung Aquila target based on S5PC110 SoC + +config MACH_GONI + bool "GONI" + select CPU_S5PV210 + select ARCH_SPARSEMEM_ENABLE + help + Machine support for Samsung GONI board + S5PC110(MCP) is one of package option of S5PV210 config MACH_SMDKV210 bool "SMDKV210" select CPU_S5PV210 select ARCH_SPARSEMEM_ENABLE + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_TS help Machine support for Samsung SMDKV210 @@ -36,6 +79,4 @@ config MACH_SMDKC110 Machine support for Samsung SMDKC110 S5PC110(MCP) is one of package option of S5PV210 -endchoice - endif diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index ba0d7091343b..6a6dea19dec5 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -17,10 +17,18 @@ obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o # machine support +obj-$(CONFIG_MACH_AQUILA) += mach-aquila.o obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o +obj-$(CONFIG_MACH_GONI) += mach-goni.o # device support obj-y += dev-audio.o obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o + +obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o +obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o +obj-$(CONFIG_S5PV210_SETUP_SDHCI) += setup-sdhci.o +obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 2b776eb5d150..76084d85fd21 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -32,6 +32,8 @@ #include <plat/devs.h> #include <plat/clock.h> #include <plat/s5pv210.h> +#include <plat/iic-core.h> +#include <plat/sdhci.h> /* Initial IO mappings */ @@ -74,7 +76,19 @@ static void s5pv210_idle(void) void __init s5pv210_map_io(void) { + s3c_device_adc.name = "s3c64xx-adc"; + iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc)); + + /* initialise device information early */ + s5pv210_default_sdhci0(); + s5pv210_default_sdhci1(); + s5pv210_default_sdhci2(); + + /* the i2c devices are directly compatible with s3c2440 */ + s3c_i2c0_setname("s3c2440-i2c"); + s3c_i2c1_setname("s3c2440-i2c"); + s3c_i2c2_setname("s3c2440-i2c"); } void __init s5pv210_init_clocks(int xtal) diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index 62c5175ef291..92fc6c7fc064 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -17,22 +17,6 @@ /* VIC0: System, DMA, Timer */ -#define IRQ_EINT0 S5P_IRQ_VIC0(0) -#define IRQ_EINT1 S5P_IRQ_VIC0(1) -#define IRQ_EINT2 S5P_IRQ_VIC0(2) -#define IRQ_EINT3 S5P_IRQ_VIC0(3) -#define IRQ_EINT4 S5P_IRQ_VIC0(4) -#define IRQ_EINT5 S5P_IRQ_VIC0(5) -#define IRQ_EINT6 S5P_IRQ_VIC0(6) -#define IRQ_EINT7 S5P_IRQ_VIC0(7) -#define IRQ_EINT8 S5P_IRQ_VIC0(8) -#define IRQ_EINT9 S5P_IRQ_VIC0(9) -#define IRQ_EINT10 S5P_IRQ_VIC0(10) -#define IRQ_EINT11 S5P_IRQ_VIC0(11) -#define IRQ_EINT12 S5P_IRQ_VIC0(12) -#define IRQ_EINT13 S5P_IRQ_VIC0(13) -#define IRQ_EINT14 S5P_IRQ_VIC0(14) -#define IRQ_EINT15 S5P_IRQ_VIC0(15) #define IRQ_EINT16_31 S5P_IRQ_VIC0(16) #define IRQ_BATF S5P_IRQ_VIC0(17) #define IRQ_MDMA S5P_IRQ_VIC0(18) @@ -134,13 +118,25 @@ #define IRQ_MDNIE3 S5P_IRQ_VIC3(8) #define IRQ_VIC_END S5P_IRQ_VIC3(31) -#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1) +#define S5P_EINT_16_31_BASE (IRQ_VIC_END + 1) -#define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE) -#define IRQ_EINT(x) S5P_EINT(x) +#define EINT_MODE S3C_GPIO_SFN(0xf) + +#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_IRQ_VIC0(0)) \ + : ((x) + S5P_EINT_16_31_BASE)) /* Set the default NR_IRQS */ -#define NR_IRQS (IRQ_EINT(31) + 1) +#define NR_IRQS (IRQ_EINT(31) + 1) + +#define EINT_GPIO_0(x) S5PV210_GPH0(x) +#define EINT_GPIO_1(x) S5PV210_GPH1(x) +#define EINT_GPIO_2(x) S5PV210_GPH2(x) +#define EINT_GPIO_3(x) S5PV210_GPH3(x) + +/* Compatibility */ +#define IRQ_LCD_FIFO IRQ_LCD0 +#define IRQ_LCD_VSYNC IRQ_LCD1 +#define IRQ_LCD_SYSTEM IRQ_LCD2 #endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index 9ab0069d1a7e..6fb7bfdd232a 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -30,6 +30,8 @@ #define S5PV210_PA_SPI1 0xE1400000 #define S5PV210_PA_IIC0 (0xE1800000) +#define S5PV210_PA_IIC1 (0xFAB00000) +#define S5PV210_PA_IIC2 (0xE1A00000) #define S5PV210_PA_TIMER (0xE2500000) #define S5P_PA_TIMER S5PV210_PA_TIMER @@ -51,6 +53,10 @@ #define S5PV210_PA_PDMA0 0xE0900000 #define S5PV210_PA_PDMA1 0xE0A00000 +#define S5PV210_PA_FB (0xF8000000) + +#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) + #define S5PV210_PA_VIC0 (0xF2000000) #define S5P_PA_VIC0 S5PV210_PA_VIC0 @@ -79,8 +85,18 @@ /* AC97 */ #define S5PV210_PA_AC97 0xE2200000 +#define S5PV210_PA_ADC (0xE1700000) + /* compatibiltiy defines. */ #define S3C_PA_UART S5PV210_PA_UART +#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0) +#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1) +#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2) #define S3C_PA_IIC S5PV210_PA_IIC0 +#define S3C_PA_IIC1 S5PV210_PA_IIC1 +#define S3C_PA_IIC2 S5PV210_PA_IIC2 +#define S3C_PA_FB S5PV210_PA_FB + +#define SAMSUNG_PA_ADC S5PV210_PA_ADC #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h index e56e0e4673ed..2a25ab40c863 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h @@ -126,6 +126,7 @@ #define S5P_RST_STAT S5P_CLKREG(0xA000) #define S5P_OSC_CON S5P_CLKREG(0x8000) +#define S5P_MDNIE_SEL S5P_CLKREG(0x7008) #define S5P_MIPI_PHY_CON0 S5P_CLKREG(0x7200) #define S5P_MIPI_PHY_CON1 S5P_CLKREG(0x7204) #define S5P_MIPI_CONTROL S5P_CLKREG(0xE814) diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h new file mode 100644 index 000000000000..6d068091c36c --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h @@ -0,0 +1,44 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/regs-gpio.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV210 - GPIO (including EINT) register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_GPIO_H +#define __ASM_ARCH_REGS_GPIO_H __FILE__ + +#include <mach/map.h> + +#define S5PV210_EINT30CON (S5P_VA_GPIO + 0xE00) +#define S5P_EINT_CON(x) (S5PV210_EINT30CON + ((x) * 0x4)) + +#define S5PV210_EINT30FLTCON0 (S5P_VA_GPIO + 0xE80) +#define S5P_EINT_FLTCON(x) (S5PV210_EINT30FLTCON0 + ((x) * 0x4)) + +#define S5PV210_EINT30MASK (S5P_VA_GPIO + 0xF00) +#define S5P_EINT_MASK(x) (S5PV210_EINT30MASK + ((x) * 0x4)) + +#define S5PV210_EINT30PEND (S5P_VA_GPIO + 0xF40) +#define S5P_EINT_PEND(x) (S5PV210_EINT30PEND + ((x) * 0x4)) + +#define eint_offset(irq) ((irq) < IRQ_EINT16_31 ? ((irq) - IRQ_EINT(0)) \ + : ((irq) - S5P_EINT_16_31_BASE)) + +#define EINT_REG_NR(x) (eint_offset(x) >> 3) + +#define eint_irq_to_bit(irq) (1 << (eint_offset(irq) & 0x7)) + +/* values for S5P_EXTINT0 */ +#define S5P_EXTINT_LOWLEV (0x00) +#define S5P_EXTINT_HILEV (0x01) +#define S5P_EXTINT_FALLEDGE (0x02) +#define S5P_EXTINT_RISEEDGE (0x03) +#define S5P_EXTINT_BOTHEDGE (0x04) + +#endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c new file mode 100644 index 000000000000..10bc76ec4025 --- /dev/null +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -0,0 +1,149 @@ +/* linux/arch/arm/mach-s5pv210/mach-aquila.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/fb.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/setup.h> +#include <asm/mach-types.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/regs-fb.h> + +#include <plat/regs-serial.h> +#include <plat/s5pv210.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/fb.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, +}; + +/* Frame Buffer */ +static struct s3c_fb_pd_win aquila_fb_win0 = { + .win_mode = { + .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60), + .left_margin = 16, + .right_margin = 16, + .upper_margin = 3, + .lower_margin = 28, + .hsync_len = 2, + .vsync_len = 2, + .xres = 480, + .yres = 800, + }, + .max_bpp = 32, + .default_bpp = 16, +}; + +static struct s3c_fb_pd_win aquila_fb_win1 = { + .win_mode = { + .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60), + .left_margin = 16, + .right_margin = 16, + .upper_margin = 3, + .lower_margin = 28, + .hsync_len = 2, + .vsync_len = 2, + .xres = 480, + .yres = 800, + }, + .max_bpp = 32, + .default_bpp = 16, +}; + +static struct s3c_fb_platdata aquila_lcd_pdata __initdata = { + .win[0] = &aquila_fb_win0, + .win[1] = &aquila_fb_win1, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | + VIDCON1_INV_VCLK | VIDCON1_INV_VDEN, + .setup_gpio = s5pv210_fb_gpio_setup_24bpp, +}; + +static struct platform_device *aquila_devices[] __initdata = { + &s3c_device_fb, +}; + +static void __init aquila_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); +} + +static void __init aquila_machine_init(void) +{ + /* FB */ + s3c_fb_set_platdata(&aquila_lcd_pdata); + + platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices)); +} + +MACHINE_START(AQUILA, "Aquila") + /* Maintainers: + Marek Szyprowski <m.szyprowski@samsung.com> + Kyungmin Park <kyungmin.park@samsung.com> */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = s5pv210_init_irq, + .map_io = aquila_map_io, + .init_machine = aquila_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c new file mode 100644 index 000000000000..4863b13824e4 --- /dev/null +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -0,0 +1,98 @@ +/* linux/arch/arm/mach-s5pv210/mach-goni.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/setup.h> +#include <asm/mach-types.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/regs-serial.h> +#include <plat/s5pv210.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = S5PV210_UCON_DEFAULT, + .ulcon = S5PV210_ULCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, +}; + +static struct platform_device *goni_devices[] __initdata = { +}; + +static void __init goni_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs)); +} + +static void __init goni_machine_init(void) +{ + platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices)); +} + +MACHINE_START(GONI, "GONI") + /* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = s5pv210_init_irq, + .map_io = goni_map_io, + .init_machine = goni_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 3c29e18528a5..b92beb6831ae 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -25,6 +25,8 @@ #include <plat/s5pv210.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/adc.h> +#include <plat/ts.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -74,6 +76,14 @@ static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = { static struct platform_device *smdkv210_devices[] __initdata = { &s5pv210_device_iis0, &s5pv210_device_ac97, + &s3c_device_adc, + &s3c_device_ts, +}; + +static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, }; static void __init smdkv210_map_io(void) @@ -85,6 +95,7 @@ static void __init smdkv210_map_io(void) static void __init smdkv210_machine_init(void) { + s3c24xx_ts_set_platdata(&s3c_ts_platform); platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices)); } diff --git a/arch/arm/mach-s5pv210/setup-fb-24bpp.c b/arch/arm/mach-s5pv210/setup-fb-24bpp.c new file mode 100644 index 000000000000..a50cbac8720d --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-fb-24bpp.c @@ -0,0 +1,62 @@ +/* linux/arch/arm/plat-s5pv210/setup-fb-24bpp.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Base s5pv210 setup information for 24bpp LCD framebuffer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/fb.h> + +#include <mach/regs-fb.h> +#include <mach/gpio.h> +#include <mach/map.h> +#include <plat/fb.h> +#include <mach/regs-clock.h> +#include <plat/gpio-cfg.h> + +void s5pv210_fb_gpio_setup_24bpp(void) +{ + unsigned int gpio = 0; + + for (gpio = S5PV210_GPF0(0); gpio <= S5PV210_GPF0(7); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + for (gpio = S5PV210_GPF1(0); gpio <= S5PV210_GPF1(7); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + for (gpio = S5PV210_GPF2(0); gpio <= S5PV210_GPF2(7); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + for (gpio = S5PV210_GPF3(0); gpio <= S5PV210_GPF3(3); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + /* Set DISPLAY_CONTROL register for Display path selection. + * + * ouput | RGB | I80 | ITU + * ----------------------------------- + * 00 | MIE | FIMD | FIMD + * 01 | MDNIE | MDNIE | FIMD + * 10 | FIMD | FIMD | FIMD + * 11 | FIMD | FIMD | FIMD + */ + writel(0x2, S5P_MDNIE_SEL); +} diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c index 9ec6845840e5..c718253c70b8 100644 --- a/arch/arm/mach-s5pv210/setup-i2c0.c +++ b/arch/arm/mach-s5pv210/setup-i2c0.c @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s5pv210/setup-i2c0.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * * I2C0 GPIO configuration. @@ -17,9 +17,14 @@ struct platform_device; /* don't need the contents */ +#include <mach/gpio.h> #include <plat/iic.h> +#include <plat/gpio-cfg.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - /* Will be populated later */ + s3c_gpio_cfgpin(S5PV210_GPD1(0), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPD1(0), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPD1(1), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPD1(1), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c new file mode 100644 index 000000000000..45e0e6ed2ed0 --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-i2c1.c @@ -0,0 +1,30 @@ +/* linux/arch/arm/mach-s5pv210/setup-i2c1.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * I2C1 GPIO configuration. + * + * Based on plat-s3c64xx/setup-i2c1.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> + +struct platform_device; /* don't need the contents */ + +#include <mach/gpio.h> +#include <plat/iic.h> +#include <plat/gpio-cfg.h> + +void s3c_i2c1_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5PV210_GPD1(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPD1(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPD1(3), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPD1(3), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c new file mode 100644 index 000000000000..b11b4bff69ac --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-i2c2.c @@ -0,0 +1,30 @@ +/* linux/arch/arm/mach-s5pv210/setup-i2c2.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * I2C2 GPIO configuration. + * + * Based on plat-s3c64xx/setup-i2c0.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> + +struct platform_device; /* don't need the contents */ + +#include <mach/gpio.h> +#include <plat/iic.h> +#include <plat/gpio-cfg.h> + +void s3c_i2c2_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5PV210_GPD1(4), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPD1(4), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPD1(5), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV210_GPD1(5), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c new file mode 100644 index 000000000000..fe7d86dad14c --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c @@ -0,0 +1,104 @@ +/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> + +#include <mach/gpio.h> +#include <plat/gpio-cfg.h> +#include <plat/regs-sdhci.h> + +void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + + /* Set all the necessary GPG0/GPG1 pins to special-function 2 */ + for (gpio = S5PV210_GPG0(0); gpio < S5PV210_GPG0(2); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + switch (width) { + case 8: + /* GPG1[3:6] special-funtion 3 */ + for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + case 4: + /* GPG0[3:6] special-funtion 2 */ + for (gpio = S5PV210_GPG0(3); gpio <= S5PV210_GPG0(6); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + default: + break; + } + + s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2)); +} + +void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + + /* Set all the necessary GPG1[0:1] pins to special-function 2 */ + for (gpio = S5PV210_GPG1(0); gpio < S5PV210_GPG1(2); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + /* Data pin GPG1[3:6] to special-function 2 */ + for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2)); +} + +void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + + /* Set all the necessary GPG2[0:1] pins to special-function 2 */ + for (gpio = S5PV210_GPG2(0); gpio < S5PV210_GPG2(2); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + switch (width) { + case 8: + /* Data pin GPG3[3:6] to special-function 3 */ + for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + case 4: + /* Data pin GPG2[3:6] to special-function 2 */ + for (gpio = S5PV210_GPG2(3); gpio <= S5PV210_GPG2(6); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + default: + break; + } + + s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2)); +} diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c new file mode 100644 index 000000000000..51815ec60c2a --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-sdhci.c @@ -0,0 +1,63 @@ +/* linux/arch/arm/mach-s5pv210/setup-sdhci.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - Helper functions for settign up SDHCI device(s) (HSMMC) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> + +#include <plat/regs-sdhci.h> +#include <plat/sdhci.h> + +/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ + +char *s5pv210_hsmmc_clksrcs[4] = { + [0] = "hsmmc", /* HCLK */ + [1] = "hsmmc", /* HCLK */ + [2] = "sclk_mmc", /* mmc_bus */ + /*[4] = reserved */ +}; + +void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card) +{ + u32 ctrl2, ctrl3; + + /* don't need to alter anything acording to card-type */ + + writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); + + ctrl2 = readl(r + S3C_SDHCI_CONTROL2); + ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; + ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | + S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | + S3C_SDHCI_CTRL2_ENFBCLKRX | + S3C_SDHCI_CTRL2_DFCNT_NONE | + S3C_SDHCI_CTRL2_ENCLKOUTHOLD); + + if (ios->clock < 25 * 1000000) + ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | + S3C_SDHCI_CTRL3_FCSEL2 | + S3C_SDHCI_CTRL3_FCSEL1 | + S3C_SDHCI_CTRL3_FCSEL0); + else + ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); + + writel(ctrl2, r + S3C_SDHCI_CONTROL2); + writel(ctrl3, r + S3C_SDHCI_CONTROL3); +} diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 92bd75607b43..5cb2dd1da632 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -7,7 +7,7 @@ config PLAT_S5P bool - depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210) + depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210) default y select ARM_VIC select NO_IOPORT @@ -24,3 +24,8 @@ config PLAT_S5P select SAMSUNG_IRQ_UART help Base platform code for Samsung's S5P series SoC. + +config S5P_EXT_INT + bool + help + Use the external interrupts (other than GPIO interrupts.) diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index 0ec09a9c36bd..25941a5d3bf6 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -16,3 +16,5 @@ obj-y += dev-uart.o obj-y += cpu.o obj-y += clock.o obj-y += irq.o +obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o +obj-y += setup-i2c0.o diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index f92e5de3a755..75cb8c37ca2c 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -19,12 +19,14 @@ #include <plat/cpu.h> #include <plat/s5p6440.h> #include <plat/s5p6442.h> +#include <plat/s5pc100.h> #include <plat/s5pv210.h> /* table of supported CPUs */ static const char name_s5p6440[] = "S5P6440"; static const char name_s5p6442[] = "S5P6442"; +static const char name_s5pc100[] = "S5PC100"; static const char name_s5pv210[] = "S5PV210/S5PC110"; static struct cpu_table cpu_ids[] __initdata = { @@ -45,6 +47,14 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s5p6442_init, .name = name_s5p6442, }, { + .idcode = 0x43100000, + .idmask = 0xfffff000, + .map_io = s5pc100_map_io, + .init_clocks = s5pc100_init_clocks, + .init_uarts = s5pc100_init_uarts, + .init = s5pc100_init, + .name = name_s5pc100, + }, { .idcode = 0x43110000, .idmask = 0xfffff000, .map_io = s5pv210_map_io, diff --git a/arch/arm/plat-s5p/include/plat/s5pc100.h b/arch/arm/plat-s5p/include/plat/s5pc100.h new file mode 100644 index 000000000000..5f6099dd7cad --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/s5pc100.h @@ -0,0 +1,33 @@ +/* arch/arm/plat-s5p/include/plat/s5pc100.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Header file for s5pc100 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Common init code for S5PC100 related SoCs */ + +extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s5pc100_register_clocks(void); +extern void s5pc100_setup_clocks(void); + +#ifdef CONFIG_CPU_S5PC100 + +extern int s5pc100_init(void); +extern void s5pc100_init_irq(void); +extern void s5pc100_map_io(void); +extern void s5pc100_init_clocks(int xtal); + +#define s5pc100_init_uarts s5pc100_common_init_uarts + +#else +#define s5pc100_init_clocks NULL +#define s5pc100_init_uarts NULL +#define s5pc100_map_io NULL +#define s5pc100_init NULL +#endif diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c new file mode 100644 index 000000000000..eaa70aa0127b --- /dev/null +++ b/arch/arm/plat-s5p/irq-eint.c @@ -0,0 +1,213 @@ +/* linux/arch/arm/plat-s5p/irq-eint.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P - IRQ EINT support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/sysdev.h> +#include <linux/gpio.h> + +#include <asm/hardware/vic.h> + +#include <plat/regs-irqtype.h> + +#include <mach/map.h> +#include <plat/cpu.h> +#include <plat/pm.h> + +#include <plat/gpio-cfg.h> +#include <mach/regs-gpio.h> + +static inline void s5p_irq_eint_mask(unsigned int irq) +{ + u32 mask; + + mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq))); + mask |= eint_irq_to_bit(irq); + __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq))); +} + +static void s5p_irq_eint_unmask(unsigned int irq) +{ + u32 mask; + + mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq))); + mask &= ~(eint_irq_to_bit(irq)); + __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq))); +} + +static inline void s5p_irq_eint_ack(unsigned int irq) +{ + __raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq))); +} + +static void s5p_irq_eint_maskack(unsigned int irq) +{ + /* compiler should in-line these */ + s5p_irq_eint_mask(irq); + s5p_irq_eint_ack(irq); +} + +static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type) +{ + int offs = eint_offset(irq); + int shift; + u32 ctrl, mask; + u32 newvalue = 0; + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + newvalue = S5P_EXTINT_RISEEDGE; + break; + + case IRQ_TYPE_EDGE_FALLING: + newvalue = S5P_EXTINT_RISEEDGE; + break; + + case IRQ_TYPE_EDGE_BOTH: + newvalue = S5P_EXTINT_BOTHEDGE; + break; + + case IRQ_TYPE_LEVEL_LOW: + newvalue = S5P_EXTINT_LOWLEV; + break; + + case IRQ_TYPE_LEVEL_HIGH: + newvalue = S5P_EXTINT_HILEV; + break; + + default: + printk(KERN_ERR "No such irq type %d", type); + return -EINVAL; + } + + shift = (offs & 0x7) * 4; + mask = 0x7 << shift; + + ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(irq))); + ctrl &= ~mask; + ctrl |= newvalue << shift; + __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(irq))); + + if ((0 <= offs) && (offs < 8)) + s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE); + + else if ((8 <= offs) && (offs < 16)) + s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE); + + else if ((16 <= offs) && (offs < 24)) + s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE); + + else if ((24 <= offs) && (offs < 32)) + s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE); + + else + printk(KERN_ERR "No such irq number %d", offs); + + return 0; +} + +static struct irq_chip s5p_irq_eint = { + .name = "s5p-eint", + .mask = s5p_irq_eint_mask, + .unmask = s5p_irq_eint_unmask, + .mask_ack = s5p_irq_eint_maskack, + .ack = s5p_irq_eint_ack, + .set_type = s5p_irq_eint_set_type, +#ifdef CONFIG_PM + .set_wake = s3c_irqext_wake, +#endif +}; + +/* s5p_irq_demux_eint + * + * This function demuxes the IRQ from the group0 external interrupts, + * from EINTs 16 to 31. It is designed to be inlined into the specific + * handler s5p_irq_demux_eintX_Y. + * + * Each EINT pend/mask registers handle eight of them. + */ +static inline void s5p_irq_demux_eint(unsigned int start) +{ + u32 status; + u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start))); + unsigned int irq; + + status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start))); + status &= ~mask; + status &= 0xff; + + while (status) { + irq = fls(status); + generic_handle_irq(irq - 1 + start); + status &= ~(1 << irq); + } +} + +static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) +{ + s5p_irq_demux_eint(IRQ_EINT(16)); + s5p_irq_demux_eint(IRQ_EINT(24)); +} + +static inline void s5p_irq_vic_eint_mask(unsigned int irq) +{ + s5p_irq_eint_mask(irq); +} + +static void s5p_irq_vic_eint_unmask(unsigned int irq) +{ + s5p_irq_eint_unmask(irq); +} + +static inline void s5p_irq_vic_eint_ack(unsigned int irq) +{ + __raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq))); +} + +static void s5p_irq_vic_eint_maskack(unsigned int irq) +{ + s5p_irq_vic_eint_mask(irq); + s5p_irq_vic_eint_ack(irq); +} + +static struct irq_chip s5p_irq_vic_eint = { + .name = "s5p_vic_eint", + .mask = s5p_irq_vic_eint_mask, + .unmask = s5p_irq_vic_eint_unmask, + .mask_ack = s5p_irq_vic_eint_maskack, + .ack = s5p_irq_vic_eint_ack, + .set_type = s5p_irq_eint_set_type, +#ifdef CONFIG_PM + .set_wake = s3c_irqext_wake, +#endif +}; + +int __init s5p_init_irq_eint(void) +{ + int irq; + + for (irq = IRQ_EINT(0); irq <= IRQ_EINT(15); irq++) + set_irq_chip(irq, &s5p_irq_vic_eint); + + for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) { + set_irq_chip(irq, &s5p_irq_eint); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } + + set_irq_chained_handler(IRQ_EINT16_31, s5p_irq_demux_eint16_31); + return 0; +} + +arch_initcall(s5p_init_irq_eint); diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig deleted file mode 100644 index c7bd2bbda239..000000000000 --- a/arch/arm/plat-s5pc1xx/Kconfig +++ /dev/null @@ -1,47 +0,0 @@ -# Copyright 2009 Samsung Electronics Co. -# Byungho Min <bhmin@samsung.com> -# -# Licensed under GPLv2 - -config PLAT_S5PC1XX - bool - depends on ARCH_S5PC1XX - default y - select PLAT_S3C - select ARM_VIC - select NO_IOPORT - select ARCH_REQUIRE_GPIOLIB - select SAMSUNG_CLKSRC - select SAMSUNG_IRQ_UART - select SAMSUNG_IRQ_VIC_TIMER - select S3C_GPIO_TRACK - select S3C_GPIO_PULL_UPDOWN - select S5P_GPIO_DRVSTR - select S3C_GPIO_CFG_S3C24XX - select S3C_GPIO_CFG_S3C64XX - select SAMSUNG_GPIOLIB_4BIT - help - Base platform code for any Samsung S5PC1XX device - -if PLAT_S5PC1XX - -# Configuration options shared by all S3C64XX implementations - -config CPU_S5PC100_INIT - bool - help - Common initialisation code for the S5PC1XX - -config CPU_S5PC100_CLOCK - bool - help - Common clock support code for the S5PC1XX - -# platform specific device setup - -config S5PC1XX_SETUP_SDHCI_GPIO - bool - help - Common setup code for SDHCI gpio. - -endif diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile deleted file mode 100644 index 9ce6409a9e02..000000000000 --- a/arch/arm/plat-s5pc1xx/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# arch/arm/plat-s5pc1xx/Makefile -# -# Copyright 2009 Samsung Electronics Co. -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := dummy.o -obj- := - -# Core files - -obj-y += dev-uart.o -obj-y += cpu.o -obj-y += irq.o -obj-y += clock.o - -# CPU support - -obj-$(CONFIG_CPU_S5PC100_INIT) += s5pc100-init.o -obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o - -# Device setup - -obj-$(CONFIG_S5PC1XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c deleted file mode 100644 index 387f23190c3c..000000000000 --- a/arch/arm/plat-s5pc1xx/clock.c +++ /dev/null @@ -1,709 +0,0 @@ -/* linux/arch/arm/plat-s5pc1xx/clock.c - * - * Copyright 2009 Samsung Electronics Co. - * - * S5PC1XX Base clock support - * - * Based on plat-s3c64xx/clock.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> - -#include <plat/regs-clock.h> -#include <plat/devs.h> -#include <plat/clock.h> - -struct clk clk_27m = { - .name = "clk_27m", - .id = -1, - .rate = 27000000, -}; - -static int clk_48m_ctrl(struct clk *clk, int enable) -{ - unsigned long flags; - u32 val; - - /* can't rely on clock lock, this register has other usages */ - local_irq_save(flags); - - val = __raw_readl(S5PC100_CLKSRC1); - if (enable) - val |= S5PC100_CLKSRC1_CLK48M_MASK; - else - val &= ~S5PC100_CLKSRC1_CLK48M_MASK; - - __raw_writel(val, S5PC100_CLKSRC1); - local_irq_restore(flags); - - return 0; -} - -struct clk clk_48m = { - .name = "clk_48m", - .id = -1, - .rate = 48000000, - .enable = clk_48m_ctrl, -}; - -struct clk clk_54m = { - .name = "clk_54m", - .id = -1, - .rate = 54000000, -}; - -struct clk clk_hd0 = { - .name = "hclkd0", - .id = -1, - .rate = 0, - .parent = NULL, - .ctrlbit = 0, - .ops = &clk_ops_def_setrate, -}; - -struct clk clk_pd0 = { - .name = "pclkd0", - .id = -1, - .rate = 0, - .parent = NULL, - .ctrlbit = 0, - .ops = &clk_ops_def_setrate, -}; - -static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable) -{ - unsigned int ctrlbit = clk->ctrlbit; - u32 con; - - con = __raw_readl(reg); - if (enable) - con |= ctrlbit; - else - con &= ~ctrlbit; - __raw_writel(con, reg); - - return 0; -} - -static int s5pc100_clk_d00_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable); -} - -static int s5pc100_clk_d01_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable); -} - -static int s5pc100_clk_d02_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable); -} - -static int s5pc100_clk_d10_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable); -} - -static int s5pc100_clk_d11_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable); -} - -static int s5pc100_clk_d12_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable); -} - -static int s5pc100_clk_d13_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable); -} - -static int s5pc100_clk_d14_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable); -} - -static int s5pc100_clk_d15_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable); -} - -static int s5pc100_clk_d20_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable); -} - -int s5pc100_sclk0_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable); -} - -int s5pc100_sclk1_ctrl(struct clk *clk, int enable) -{ - return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable); -} - -static struct clk s5pc100_init_clocks_disable[] = { - { - .name = "dsi", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_DSI, - }, { - .name = "csi", - .id = -1, - .parent = &clk_h, - .enable = s5pc100_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_CSI, - }, { - .name = "ccan", - .id = 0, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_CCAN0, - }, { - .name = "ccan", - .id = 1, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_CCAN1, - }, { - .name = "keypad", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_KEYIF, - }, { - .name = "hclkd2", - .id = -1, - .parent = NULL, - .enable = s5pc100_clk_d20_ctrl, - .ctrlbit = S5PC100_CLKGATE_D20_HCLKD2, - }, { - .name = "iis-d2", - .id = -1, - .parent = NULL, - .enable = s5pc100_clk_d20_ctrl, - .ctrlbit = S5PC100_CLKGATE_D20_I2SD2, - }, -}; - -static struct clk s5pc100_init_clocks[] = { - /* System1 (D0_0) devices */ - { - .name = "intc", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_INTC, - }, { - .name = "tzic", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_TZIC, - }, { - .name = "cf-ata", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_CFCON, - }, { - .name = "mdma", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_MDMA, - }, { - .name = "g2d", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_G2D, - }, { - .name = "secss", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_SECSS, - }, { - .name = "cssys", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d00_ctrl, - .ctrlbit = S5PC100_CLKGATE_D00_CSSYS, - }, - - /* Memory (D0_1) devices */ - { - .name = "dmc", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_DMC, - }, { - .name = "sromc", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_SROMC, - }, { - .name = "onenand", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_ONENAND, - }, { - .name = "nand", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_NFCON, - }, { - .name = "intmem", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_INTMEM, - }, { - .name = "ebi", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d01_ctrl, - .ctrlbit = S5PC100_CLKGATE_D01_EBI, - }, - - /* System2 (D0_2) devices */ - { - .name = "seckey", - .id = -1, - .parent = &clk_pd0, - .enable = s5pc100_clk_d02_ctrl, - .ctrlbit = S5PC100_CLKGATE_D02_SECKEY, - }, { - .name = "sdm", - .id = -1, - .parent = &clk_hd0, - .enable = s5pc100_clk_d02_ctrl, - .ctrlbit = S5PC100_CLKGATE_D02_SDM, - }, - - /* File (D1_0) devices */ - { - .name = "pdma", - .id = 0, - .parent = &clk_h, - .enable = s5pc100_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_PDMA0, - }, { - .name = "pdma", - .id = 1, - .parent = &clk_h, - .enable = s5pc100_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_PDMA1, - }, { - .name = "usb-host", - .id = -1, - .parent = &clk_h, - .enable = s5pc100_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_USBHOST, - }, { - .name = "otg", - .id = -1, - .parent = &clk_h, - .enable = s5pc100_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_USBOTG, - }, { - .name = "modem", - .id = -1, - .parent = &clk_h, - .enable = s5pc100_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_MODEMIF, - }, { - .name = "hsmmc", - .id = 0, - .parent = &clk_48m, - .enable = s5pc100_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_HSMMC0, - }, { - .name = "hsmmc", - .id = 1, - .parent = &clk_48m, - .enable = s5pc100_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_HSMMC1, - }, { - .name = "hsmmc", - .id = 2, - .parent = &clk_48m, - .enable = s5pc100_clk_d10_ctrl, - .ctrlbit = S5PC100_CLKGATE_D10_HSMMC2, - }, - - /* Multimedia1 (D1_1) devices */ - { - .name = "lcd", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_LCD, - }, { - .name = "rotator", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_ROTATOR, - }, { - .name = "fimc", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_FIMC0, - }, { - .name = "fimc", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_FIMC1, - }, { - .name = "fimc", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_FIMC2, - }, { - .name = "jpeg", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_JPEG, - }, { - .name = "g3d", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d11_ctrl, - .ctrlbit = S5PC100_CLKGATE_D11_G3D, - }, - - /* Multimedia2 (D1_2) devices */ - { - .name = "tv", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d12_ctrl, - .ctrlbit = S5PC100_CLKGATE_D12_TV, - }, { - .name = "vp", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d12_ctrl, - .ctrlbit = S5PC100_CLKGATE_D12_VP, - }, { - .name = "mixer", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d12_ctrl, - .ctrlbit = S5PC100_CLKGATE_D12_MIXER, - }, { - .name = "hdmi", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d12_ctrl, - .ctrlbit = S5PC100_CLKGATE_D12_HDMI, - }, { - .name = "mfc", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d12_ctrl, - .ctrlbit = S5PC100_CLKGATE_D12_MFC, - }, - - /* System (D1_3) devices */ - { - .name = "chipid", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_CHIPID, - }, { - .name = "gpio", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_GPIO, - }, { - .name = "apc", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_APC, - }, { - .name = "iec", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_IEC, - }, { - .name = "timers", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_PWM, - }, { - .name = "systimer", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_SYSTIMER, - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_WDT, - }, { - .name = "rtc", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d13_ctrl, - .ctrlbit = S5PC100_CLKGATE_D13_RTC, - }, - - /* Connectivity (D1_4) devices */ - { - .name = "uart", - .id = 0, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_UART0, - }, { - .name = "uart", - .id = 1, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_UART1, - }, { - .name = "uart", - .id = 2, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_UART2, - }, { - .name = "uart", - .id = 3, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_UART3, - }, { - .name = "i2c", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_IIC, - }, { - .name = "hdmi-i2c", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_HDMI_IIC, - }, { - .name = "spi", - .id = 0, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_SPI0, - }, { - .name = "spi", - .id = 1, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_SPI1, - }, { - .name = "spi", - .id = 2, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_SPI2, - }, { - .name = "irda", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_IRDA, - }, { - .name = "hsitx", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_HSITX, - }, { - .name = "hsirx", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d14_ctrl, - .ctrlbit = S5PC100_CLKGATE_D14_HSIRX, - }, - - /* Audio (D1_5) devices */ - { - .name = "iis", - .id = 0, - .parent = &clk_p, - .enable = s5pc100_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_IIS0, - }, { - .name = "iis", - .id = 1, - .parent = &clk_p, - .enable = s5pc100_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_IIS1, - }, { - .name = "iis", - .id = 2, - .parent = &clk_p, - .enable = s5pc100_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_IIS2, - }, { - .name = "ac97", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_AC97, - }, { - .name = "pcm", - .id = 0, - .parent = &clk_p, - .enable = s5pc100_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_PCM0, - }, { - .name = "pcm", - .id = 1, - .parent = &clk_p, - .enable = s5pc100_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_PCM1, - }, { - .name = "spdif", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_SPDIF, - }, { - .name = "adc", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_TSADC, - }, { - .name = "cg", - .id = -1, - .parent = &clk_p, - .enable = s5pc100_clk_d15_ctrl, - .ctrlbit = S5PC100_CLKGATE_D15_CG, - }, - - /* Audio (D2_0) devices: all disabled */ - - /* Special Clocks 0 */ - { - .name = "sclk_hpm", - .id = -1, - .parent = NULL, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_HPM, - }, { - .name = "sclk_onenand", - .id = -1, - .parent = NULL, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_ONENAND, - }, { - .name = "spi_48", - .id = 0, - .parent = &clk_48m, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0_48, - }, { - .name = "spi_48", - .id = 1, - .parent = &clk_48m, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1_48, - }, { - .name = "spi_48", - .id = 2, - .parent = &clk_48m, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2_48, - }, { - .name = "mmc_48", - .id = 0, - .parent = &clk_48m, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0_48, - }, { - .name = "mmc_48", - .id = 1, - .parent = &clk_48m, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1_48, - }, { - .name = "mmc_48", - .id = 2, - .parent = &clk_48m, - .enable = s5pc100_sclk0_ctrl, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2_48, - }, - /* Special Clocks 1 */ -}; - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_epll, - &clk_pd0, - &clk_hd0, - &clk_27m, - &clk_48m, - &clk_54m, -}; - -void __init s5pc1xx_register_clocks(void) -{ - struct clk *clkp; - int ret; - int ptr; - int size; - - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - s3c_register_clocks(s5pc100_init_clocks, - ARRAY_SIZE(s5pc100_init_clocks)); - - clkp = s5pc100_init_clocks_disable; - size = ARRAY_SIZE(s5pc100_init_clocks_disable); - - for (ptr = 0; ptr < size; ptr++, clkp++) { - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - - (clkp->enable)(clkp, 0); - } - - s3c_pwmclk_init(); -} diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c deleted file mode 100644 index 02baeaa2a121..000000000000 --- a/arch/arm/plat-s5pc1xx/cpu.c +++ /dev/null @@ -1,122 +0,0 @@ -/* linux/arch/arm/plat-s5pc1xx/cpu.c - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC1XX CPU Support - * - * Based on plat-s3c64xx/cpu.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> - -#include <asm/mach/map.h> - -#include <plat/regs-serial.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/clock.h> - -#include <plat/s5pc100.h> - -/* table of supported CPUs */ - -static const char name_s5pc100[] = "S5PC100"; - -static struct cpu_table cpu_ids[] __initdata = { - { - .idcode = 0x43100000, - .idmask = 0xfffff000, - .map_io = s5pc100_map_io, - .init_clocks = s5pc100_init_clocks, - .init_uarts = s5pc100_init_uarts, - .init = s5pc100_init, - .name = name_s5pc100, - }, -}; -/* minimal IO mapping */ - -/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */ -#define UART_OFFS (S3C_PA_UART & 0xffff) - -static struct map_desc s5pc1xx_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5PC1XX_VA_CLK_OTHER, - .pfn = __phys_to_pfn(S5PC1XX_PA_CLK_OTHER), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5PC1XX_VA_GPIO, - .pfn = __phys_to_pfn(S5PC100_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5PC1XX_VA_CHIPID, - .pfn = __phys_to_pfn(S5PC1XX_PA_CHIPID), - .length = SZ_16, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5PC1XX_VA_CLK, - .pfn = __phys_to_pfn(S5PC1XX_PA_CLK), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5PC1XX_VA_PWR, - .pfn = __phys_to_pfn(S5PC1XX_PA_PWR), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)(S5PC1XX_VA_UART), - .pfn = __phys_to_pfn(S5PC1XX_PA_UART), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5PC1XX_VA_VIC(0), - .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(0)), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5PC1XX_VA_VIC(1), - .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(1)), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5PC1XX_VA_VIC(2), - .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(2)), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5PC1XX_VA_TIMER, - .pfn = __phys_to_pfn(S5PC1XX_PA_TIMER), - .length = SZ_256, - .type = MT_DEVICE, - }, -}; - -/* read cpu identification code */ - -void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size) -{ - unsigned long idcode; - - /* initialise the io descriptors we need for initialisation */ - iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc)); - iotable_init(mach_desc, size); - - idcode = __raw_readl(S5PC1XX_VA_CHIPID); - s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); -} diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c deleted file mode 100644 index 586c95c60bfe..000000000000 --- a/arch/arm/plat-s5pc1xx/dev-uart.c +++ /dev/null @@ -1,145 +0,0 @@ -/* linux/arch/arm/plat-s5pc1xx/dev-uart.c - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * Based on plat-s3c64xx/dev-uart.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/platform_device.h> - -#include <asm/mach/arch.h> -#include <asm/mach/irq.h> -#include <mach/hardware.h> -#include <mach/map.h> - -#include <plat/devs.h> - -/* Serial port registrations */ - -/* 64xx uarts are closer together */ - -static struct resource s5pc1xx_uart0_resource[] = { - [0] = { - .start = S3C_PA_UART0, - .end = S3C_PA_UART0 + 0x100, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S3CUART_RX0, - .end = IRQ_S3CUART_RX0, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S3CUART_TX0, - .end = IRQ_S3CUART_TX0, - .flags = IORESOURCE_IRQ, - - }, - [3] = { - .start = IRQ_S3CUART_ERR0, - .end = IRQ_S3CUART_ERR0, - .flags = IORESOURCE_IRQ, - } -}; - -static struct resource s5pc1xx_uart1_resource[] = { - [0] = { - .start = S3C_PA_UART1, - .end = S3C_PA_UART1 + 0x100, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S3CUART_RX1, - .end = IRQ_S3CUART_RX1, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S3CUART_TX1, - .end = IRQ_S3CUART_TX1, - .flags = IORESOURCE_IRQ, - - }, - [3] = { - .start = IRQ_S3CUART_ERR1, - .end = IRQ_S3CUART_ERR1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource s5pc1xx_uart2_resource[] = { - [0] = { - .start = S3C_PA_UART2, - .end = S3C_PA_UART2 + 0x100, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S3CUART_RX2, - .end = IRQ_S3CUART_RX2, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S3CUART_TX2, - .end = IRQ_S3CUART_TX2, - .flags = IORESOURCE_IRQ, - - }, - [3] = { - .start = IRQ_S3CUART_ERR2, - .end = IRQ_S3CUART_ERR2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource s5pc1xx_uart3_resource[] = { - [0] = { - .start = S3C_PA_UART3, - .end = S3C_PA_UART3 + 0x100, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S3CUART_RX3, - .end = IRQ_S3CUART_RX3, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_S3CUART_TX3, - .end = IRQ_S3CUART_TX3, - .flags = IORESOURCE_IRQ, - - }, - [3] = { - .start = IRQ_S3CUART_ERR3, - .end = IRQ_S3CUART_ERR3, - .flags = IORESOURCE_IRQ, - }, -}; - - -struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = { - [0] = { - .resources = s5pc1xx_uart0_resource, - .nr_resources = ARRAY_SIZE(s5pc1xx_uart0_resource), - }, - [1] = { - .resources = s5pc1xx_uart1_resource, - .nr_resources = ARRAY_SIZE(s5pc1xx_uart1_resource), - }, - [2] = { - .resources = s5pc1xx_uart2_resource, - .nr_resources = ARRAY_SIZE(s5pc1xx_uart2_resource), - }, - [3] = { - .resources = s5pc1xx_uart3_resource, - .nr_resources = ARRAY_SIZE(s5pc1xx_uart3_resource), - }, -}; diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h deleted file mode 100644 index 33ad267e8477..000000000000 --- a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h +++ /dev/null @@ -1,44 +0,0 @@ -/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-eint.h - * - * Copyright 2009 Samsung Electronics Co. - * - * External Interrupt (GPH0 ~ GPH3) control register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S5PC1XX_WKUP_INT_CON0_7 (S5PC1XX_EINT_BASE + 0x0) -#define S5PC1XX_WKUP_INT_CON8_15 (S5PC1XX_EINT_BASE + 0x4) -#define S5PC1XX_WKUP_INT_CON16_23 (S5PC1XX_EINT_BASE + 0x8) -#define S5PC1XX_WKUP_INT_CON24_31 (S5PC1XX_EINT_BASE + 0xC) -#define S5PC1XX_WKUP_INT_CON(x) (S5PC1XX_WKUP_INT_CON0_7 + (x * 0x4)) - -#define S5PC1XX_WKUP_INT_FLTCON0_3 (S5PC1XX_EINT_BASE + 0x80) -#define S5PC1XX_WKUP_INT_FLTCON4_7 (S5PC1XX_EINT_BASE + 0x84) -#define S5PC1XX_WKUP_INT_FLTCON8_11 (S5PC1XX_EINT_BASE + 0x88) -#define S5PC1XX_WKUP_INT_FLTCON12_15 (S5PC1XX_EINT_BASE + 0x8C) -#define S5PC1XX_WKUP_INT_FLTCON16_19 (S5PC1XX_EINT_BASE + 0x90) -#define S5PC1XX_WKUP_INT_FLTCON20_23 (S5PC1XX_EINT_BASE + 0x94) -#define S5PC1XX_WKUP_INT_FLTCON24_27 (S5PC1XX_EINT_BASE + 0x98) -#define S5PC1XX_WKUP_INT_FLTCON28_31 (S5PC1XX_EINT_BASE + 0x9C) -#define S5PC1XX_WKUP_INT_FLTCON(x) (S5PC1XX_WKUP_INT_FLTCON0_3 + (x * 0x4)) - -#define S5PC1XX_WKUP_INT_MASK0_7 (S5PC1XX_EINT_BASE + 0x100) -#define S5PC1XX_WKUP_INT_MASK8_15 (S5PC1XX_EINT_BASE + 0x104) -#define S5PC1XX_WKUP_INT_MASK16_23 (S5PC1XX_EINT_BASE + 0x108) -#define S5PC1XX_WKUP_INT_MASK24_31 (S5PC1XX_EINT_BASE + 0x10C) -#define S5PC1XX_WKUP_INT_MASK(x) (S5PC1XX_WKUP_INT_MASK0_7 + (x * 0x4)) - -#define S5PC1XX_WKUP_INT_PEND0_7 (S5PC1XX_EINT_BASE + 0x140) -#define S5PC1XX_WKUP_INT_PEND8_15 (S5PC1XX_EINT_BASE + 0x144) -#define S5PC1XX_WKUP_INT_PEND16_23 (S5PC1XX_EINT_BASE + 0x148) -#define S5PC1XX_WKUP_INT_PEND24_31 (S5PC1XX_EINT_BASE + 0x14C) -#define S5PC1XX_WKUP_INT_PEND(x) (S5PC1XX_WKUP_INT_PEND0_7 + (x * 0x4)) - -#define S5PC1XX_WKUP_INT_LOWLEV (0x00) -#define S5PC1XX_WKUP_INT_HILEV (0x01) -#define S5PC1XX_WKUP_INT_FALLEDGE (0x02) -#define S5PC1XX_WKUP_INT_RISEEDGE (0x03) -#define S5PC1XX_WKUP_INT_BOTHEDGE (0x04) diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h deleted file mode 100644 index 409c804315e8..000000000000 --- a/arch/arm/plat-s5pc1xx/include/plat/irqs.h +++ /dev/null @@ -1,198 +0,0 @@ -/* linux/arch/arm/plat-s5pc1xx/include/plat/irqs.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC1XX - Common IRQ support - * - * Based on plat-s3c64xx/include/plat/irqs.h - */ - -#ifndef __ASM_PLAT_S5PC1XX_IRQS_H -#define __ASM_PLAT_S5PC1XX_IRQS_H __FILE__ - -/* we keep the first set of CPU IRQs out of the range of - * the ISA space, so that the PC104 has them to itself - * and we don't end up having to do horrible things to the - * standard ISA drivers.... - * - * note, since we're using the VICs, our start must be a - * mulitple of 32 to allow the common code to work - */ - -#define S3C_IRQ_OFFSET (32) - -#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET) - -#define S3C_VIC0_BASE S3C_IRQ(0) -#define S3C_VIC1_BASE S3C_IRQ(32) -#define S3C_VIC2_BASE S3C_IRQ(64) - -/* UART interrupts, each UART has 4 intterupts per channel so - * use the space between the ISA and S3C main interrupts. Note, these - * are not in the same order as the S3C24XX series! */ - -#define IRQ_S3CUART_BASE0 (16) -#define IRQ_S3CUART_BASE1 (20) -#define IRQ_S3CUART_BASE2 (24) -#define IRQ_S3CUART_BASE3 (28) - -#define UART_IRQ_RXD (0) -#define UART_IRQ_ERR (1) -#define UART_IRQ_TXD (2) -#define UART_IRQ_MODEM (3) - -#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD) -#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD) -#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR) - -#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD) -#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD) -#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR) - -#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD) -#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD) -#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR) - -#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD) -#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD) -#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR) - -/* VIC based IRQs */ - -#define S5PC1XX_IRQ_VIC0(x) (S3C_VIC0_BASE + (x)) -#define S5PC1XX_IRQ_VIC1(x) (S3C_VIC1_BASE + (x)) -#define S5PC1XX_IRQ_VIC2(x) (S3C_VIC2_BASE + (x)) - -/* - * VIC0: system, DMA, timer - */ -#define IRQ_EINT0 S5PC1XX_IRQ_VIC0(0) -#define IRQ_EINT1 S5PC1XX_IRQ_VIC0(1) -#define IRQ_EINT2 S5PC1XX_IRQ_VIC0(2) -#define IRQ_EINT3 S5PC1XX_IRQ_VIC0(3) -#define IRQ_EINT4 S5PC1XX_IRQ_VIC0(4) -#define IRQ_EINT5 S5PC1XX_IRQ_VIC0(5) -#define IRQ_EINT6 S5PC1XX_IRQ_VIC0(6) -#define IRQ_EINT7 S5PC1XX_IRQ_VIC0(7) -#define IRQ_EINT8 S5PC1XX_IRQ_VIC0(8) -#define IRQ_EINT9 S5PC1XX_IRQ_VIC0(9) -#define IRQ_EINT10 S5PC1XX_IRQ_VIC0(10) -#define IRQ_EINT11 S5PC1XX_IRQ_VIC0(11) -#define IRQ_EINT12 S5PC1XX_IRQ_VIC0(12) -#define IRQ_EINT13 S5PC1XX_IRQ_VIC0(13) -#define IRQ_EINT14 S5PC1XX_IRQ_VIC0(14) -#define IRQ_EINT15 S5PC1XX_IRQ_VIC0(15) -#define IRQ_EINT16_31 S5PC1XX_IRQ_VIC0(16) -#define IRQ_BATF S5PC1XX_IRQ_VIC0(17) -#define IRQ_MDMA S5PC1XX_IRQ_VIC0(18) -#define IRQ_PDMA0 S5PC1XX_IRQ_VIC0(19) -#define IRQ_PDMA1 S5PC1XX_IRQ_VIC0(20) -#define IRQ_TIMER0_VIC S5PC1XX_IRQ_VIC0(21) -#define IRQ_TIMER1_VIC S5PC1XX_IRQ_VIC0(22) -#define IRQ_TIMER2_VIC S5PC1XX_IRQ_VIC0(23) -#define IRQ_TIMER3_VIC S5PC1XX_IRQ_VIC0(24) -#define IRQ_TIMER4_VIC S5PC1XX_IRQ_VIC0(25) -#define IRQ_SYSTIMER S5PC1XX_IRQ_VIC0(26) -#define IRQ_WDT S5PC1XX_IRQ_VIC0(27) -#define IRQ_RTC_ALARM S5PC1XX_IRQ_VIC0(28) -#define IRQ_RTC_TIC S5PC1XX_IRQ_VIC0(29) -#define IRQ_GPIOINT S5PC1XX_IRQ_VIC0(30) - -/* - * VIC1: ARM, power, memory, connectivity - */ -#define IRQ_CORTEX0 S5PC1XX_IRQ_VIC1(0) -#define IRQ_CORTEX1 S5PC1XX_IRQ_VIC1(1) -#define IRQ_CORTEX2 S5PC1XX_IRQ_VIC1(2) -#define IRQ_CORTEX3 S5PC1XX_IRQ_VIC1(3) -#define IRQ_CORTEX4 S5PC1XX_IRQ_VIC1(4) -#define IRQ_IEMAPC S5PC1XX_IRQ_VIC1(5) -#define IRQ_IEMIEC S5PC1XX_IRQ_VIC1(6) -#define IRQ_ONENAND S5PC1XX_IRQ_VIC1(7) -#define IRQ_NFC S5PC1XX_IRQ_VIC1(8) -#define IRQ_CFC S5PC1XX_IRQ_VIC1(9) -#define IRQ_UART0 S5PC1XX_IRQ_VIC1(10) -#define IRQ_UART1 S5PC1XX_IRQ_VIC1(11) -#define IRQ_UART2 S5PC1XX_IRQ_VIC1(12) -#define IRQ_UART3 S5PC1XX_IRQ_VIC1(13) -#define IRQ_IIC S5PC1XX_IRQ_VIC1(14) -#define IRQ_SPI0 S5PC1XX_IRQ_VIC1(15) -#define IRQ_SPI1 S5PC1XX_IRQ_VIC1(16) -#define IRQ_SPI2 S5PC1XX_IRQ_VIC1(17) -#define IRQ_IRDA S5PC1XX_IRQ_VIC1(18) -#define IRQ_CAN0 S5PC1XX_IRQ_VIC1(19) -#define IRQ_CAN1 S5PC1XX_IRQ_VIC1(20) -#define IRQ_HSIRX S5PC1XX_IRQ_VIC1(21) -#define IRQ_HSITX S5PC1XX_IRQ_VIC1(22) -#define IRQ_UHOST S5PC1XX_IRQ_VIC1(23) -#define IRQ_OTG S5PC1XX_IRQ_VIC1(24) -#define IRQ_MSM S5PC1XX_IRQ_VIC1(25) -#define IRQ_HSMMC0 S5PC1XX_IRQ_VIC1(26) -#define IRQ_HSMMC1 S5PC1XX_IRQ_VIC1(27) -#define IRQ_HSMMC2 S5PC1XX_IRQ_VIC1(28) -#define IRQ_MIPICSI S5PC1XX_IRQ_VIC1(29) -#define IRQ_MIPIDSI S5PC1XX_IRQ_VIC1(30) - -/* - * VIC2: multimedia, audio, security - */ -#define IRQ_LCD0 S5PC1XX_IRQ_VIC2(0) -#define IRQ_LCD1 S5PC1XX_IRQ_VIC2(1) -#define IRQ_LCD2 S5PC1XX_IRQ_VIC2(2) -#define IRQ_LCD3 S5PC1XX_IRQ_VIC2(3) -#define IRQ_ROTATOR S5PC1XX_IRQ_VIC2(4) -#define IRQ_FIMC0 S5PC1XX_IRQ_VIC2(5) -#define IRQ_FIMC1 S5PC1XX_IRQ_VIC2(6) -#define IRQ_FIMC2 S5PC1XX_IRQ_VIC2(7) -#define IRQ_JPEG S5PC1XX_IRQ_VIC2(8) -#define IRQ_2D S5PC1XX_IRQ_VIC2(9) -#define IRQ_3D S5PC1XX_IRQ_VIC2(10) -#define IRQ_MIXER S5PC1XX_IRQ_VIC2(11) -#define IRQ_HDMI S5PC1XX_IRQ_VIC2(12) -#define IRQ_IIC1 S5PC1XX_IRQ_VIC2(13) -#define IRQ_MFC S5PC1XX_IRQ_VIC2(14) -#define IRQ_TVENC S5PC1XX_IRQ_VIC2(15) -#define IRQ_I2S0 S5PC1XX_IRQ_VIC2(16) -#define IRQ_I2S1 S5PC1XX_IRQ_VIC2(17) -#define IRQ_I2S2 S5PC1XX_IRQ_VIC2(18) -#define IRQ_AC97 S5PC1XX_IRQ_VIC2(19) -#define IRQ_PCM0 S5PC1XX_IRQ_VIC2(20) -#define IRQ_PCM1 S5PC1XX_IRQ_VIC2(21) -#define IRQ_SPDIF S5PC1XX_IRQ_VIC2(22) -#define IRQ_ADC S5PC1XX_IRQ_VIC2(23) -#define IRQ_PENDN S5PC1XX_IRQ_VIC2(24) -#define IRQ_TC IRQ_PENDN -#define IRQ_KEYPAD S5PC1XX_IRQ_VIC2(25) -#define IRQ_CG S5PC1XX_IRQ_VIC2(26) -#define IRQ_SEC S5PC1XX_IRQ_VIC2(27) -#define IRQ_SECRX S5PC1XX_IRQ_VIC2(28) -#define IRQ_SECTX S5PC1XX_IRQ_VIC2(29) -#define IRQ_SDMIRQ S5PC1XX_IRQ_VIC2(30) -#define IRQ_SDMFIQ S5PC1XX_IRQ_VIC2(31) - -#define IRQ_TIMER(x) (IRQ_SDMFIQ + 1 + (x)) -#define IRQ_TIMER0 IRQ_TIMER(0) -#define IRQ_TIMER1 IRQ_TIMER(1) -#define IRQ_TIMER2 IRQ_TIMER(2) -#define IRQ_TIMER3 IRQ_TIMER(3) -#define IRQ_TIMER4 IRQ_TIMER(4) - -/* External interrupt */ -#define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 6) - -#define S3C_EINT(x) (S3C_IRQ_EINT_BASE + (x - 16)) -#define IRQ_EINT(x) (x < 16 ? IRQ_EINT0 + x : S3C_EINT(x)) -#define IRQ_EINT_BIT(x) (x < IRQ_EINT16_31 ? x - IRQ_EINT0 : x - S3C_EINT(0)) - -/* GPIO interrupt */ -#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1) -#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x)) - -/* - * Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs - */ -#define NR_IRQS (S3C_IRQ_GPIO(320) + 1) - -#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */ - diff --git a/arch/arm/plat-s5pc1xx/include/plat/pll.h b/arch/arm/plat-s5pc1xx/include/plat/pll.h deleted file mode 100644 index 21afef1573e7..000000000000 --- a/arch/arm/plat-s5pc1xx/include/plat/pll.h +++ /dev/null @@ -1,38 +0,0 @@ -/* arch/arm/plat-s5pc1xx/include/plat/pll.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC1XX PLL code - * - * Based on plat-s3c64xx/include/plat/pll.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S5P_PLL_MDIV_MASK ((1 << (25-16+1)) - 1) -#define S5P_PLL_PDIV_MASK ((1 << (13-8+1)) - 1) -#define S5P_PLL_SDIV_MASK ((1 << (2-0+1)) - 1) -#define S5P_PLL_MDIV_SHIFT (16) -#define S5P_PLL_PDIV_SHIFT (8) -#define S5P_PLL_SDIV_SHIFT (0) - -#include <asm/div64.h> - -static inline unsigned long s5pc1xx_get_pll(unsigned long baseclk, - u32 pllcon) -{ - u32 mdiv, pdiv, sdiv; - u64 fvco = baseclk; - - mdiv = (pllcon >> S5P_PLL_MDIV_SHIFT) & S5P_PLL_MDIV_MASK; - pdiv = (pllcon >> S5P_PLL_PDIV_SHIFT) & S5P_PLL_PDIV_MASK; - sdiv = (pllcon >> S5P_PLL_SDIV_SHIFT) & S5P_PLL_SDIV_MASK; - - fvco *= mdiv; - do_div(fvco, (pdiv << sdiv)); - - return (unsigned long)fvco; -} diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h deleted file mode 100644 index 24dec4e52538..000000000000 --- a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h +++ /dev/null @@ -1,252 +0,0 @@ -/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC1XX clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_REGS_CLOCK_H -#define __PLAT_REGS_CLOCK_H __FILE__ - -#define S5PC100_CLKREG(x) (S5PC1XX_VA_CLK + (x)) -#define S5PC100_CLKREG_OTHER(x) (S5PC1XX_VA_CLK_OTHER + (x)) - -/* s5pc100 register for clock */ -#define S5PC100_APLL_LOCK S5PC100_CLKREG(0x00) -#define S5PC100_MPLL_LOCK S5PC100_CLKREG(0x04) -#define S5PC100_EPLL_LOCK S5PC100_CLKREG(0x08) -#define S5PC100_HPLL_LOCK S5PC100_CLKREG(0x0C) - -#define S5PC100_APLL_CON S5PC100_CLKREG(0x100) -#define S5PC100_MPLL_CON S5PC100_CLKREG(0x104) -#define S5PC100_EPLL_CON S5PC100_CLKREG(0x108) -#define S5PC100_HPLL_CON S5PC100_CLKREG(0x10C) - -#define S5PC100_CLKSRC0 S5PC100_CLKREG(0x200) -#define S5PC100_CLKSRC1 S5PC100_CLKREG(0x204) -#define S5PC100_CLKSRC2 S5PC100_CLKREG(0x208) -#define S5PC100_CLKSRC3 S5PC100_CLKREG(0x20C) - -#define S5PC100_CLKDIV0 S5PC100_CLKREG(0x300) -#define S5PC100_CLKDIV1 S5PC100_CLKREG(0x304) -#define S5PC100_CLKDIV2 S5PC100_CLKREG(0x308) -#define S5PC100_CLKDIV3 S5PC100_CLKREG(0x30C) -#define S5PC100_CLKDIV4 S5PC100_CLKREG(0x310) - -#define S5PC100_CLK_OUT S5PC100_CLKREG(0x400) - -#define S5PC100_CLKGATE_D00 S5PC100_CLKREG(0x500) -#define S5PC100_CLKGATE_D01 S5PC100_CLKREG(0x504) -#define S5PC100_CLKGATE_D02 S5PC100_CLKREG(0x508) - -#define S5PC100_CLKGATE_D10 S5PC100_CLKREG(0x520) -#define S5PC100_CLKGATE_D11 S5PC100_CLKREG(0x524) -#define S5PC100_CLKGATE_D12 S5PC100_CLKREG(0x528) -#define S5PC100_CLKGATE_D13 S5PC100_CLKREG(0x52C) -#define S5PC100_CLKGATE_D14 S5PC100_CLKREG(0x530) -#define S5PC100_CLKGATE_D15 S5PC100_CLKREG(0x534) - -#define S5PC100_CLKGATE_D20 S5PC100_CLKREG(0x540) - -#define S5PC100_SCLKGATE0 S5PC100_CLKREG(0x560) -#define S5PC100_SCLKGATE1 S5PC100_CLKREG(0x564) - -/* EPLL_CON */ -#define S5PC100_EPLL_EN (1<<31) -#define S5PC100_EPLL_MASK 0xffffffff -#define S5PC100_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s))) - -/* CLKSRC0..CLKSRC3 -> mostly removed due to clksrc updates */ -#define S5PC100_CLKSRC1_CLK48M_MASK (0x1<<24) -#define S5PC100_CLKSRC1_CLK48M_SHIFT (24) - -/* CLKDIV0 */ -#define S5PC100_CLKDIV0_APLL_MASK (0x1<<0) -#define S5PC100_CLKDIV0_APLL_SHIFT (0) -#define S5PC100_CLKDIV0_ARM_MASK (0x7<<4) -#define S5PC100_CLKDIV0_ARM_SHIFT (4) -#define S5PC100_CLKDIV0_D0_MASK (0x7<<8) -#define S5PC100_CLKDIV0_D0_SHIFT (8) -#define S5PC100_CLKDIV0_PCLKD0_MASK (0x7<<12) -#define S5PC100_CLKDIV0_PCLKD0_SHIFT (12) -#define S5PC100_CLKDIV0_SECSS_MASK (0x7<<16) -#define S5PC100_CLKDIV0_SECSS_SHIFT (16) - -/* CLKDIV1 (OneNAND clock only used in one place, removed) */ -#define S5PC100_CLKDIV1_APLL2_MASK (0x7<<0) -#define S5PC100_CLKDIV1_APLL2_SHIFT (0) -#define S5PC100_CLKDIV1_MPLL_MASK (0x3<<4) -#define S5PC100_CLKDIV1_MPLL_SHIFT (4) -#define S5PC100_CLKDIV1_MPLL2_MASK (0x1<<8) -#define S5PC100_CLKDIV1_MPLL2_SHIFT (8) -#define S5PC100_CLKDIV1_D1_MASK (0x7<<12) -#define S5PC100_CLKDIV1_D1_SHIFT (12) -#define S5PC100_CLKDIV1_PCLKD1_MASK (0x7<<16) -#define S5PC100_CLKDIV1_PCLKD1_SHIFT (16) -#define S5PC100_CLKDIV1_CAM_MASK (0x1F<<24) -#define S5PC100_CLKDIV1_CAM_SHIFT (24) - -/* CLKDIV2 => removed in clksrc update */ -/* CLKDIV3 => removed in clksrc update, or not needed */ -/* CLKDIV4 => removed in clksrc update, or not needed */ - -/* HCLKD0/PCLKD0 Clock Gate 0 Registers */ -#define S5PC100_CLKGATE_D00_INTC (1<<0) -#define S5PC100_CLKGATE_D00_TZIC (1<<1) -#define S5PC100_CLKGATE_D00_CFCON (1<<2) -#define S5PC100_CLKGATE_D00_MDMA (1<<3) -#define S5PC100_CLKGATE_D00_G2D (1<<4) -#define S5PC100_CLKGATE_D00_SECSS (1<<5) -#define S5PC100_CLKGATE_D00_CSSYS (1<<6) - -/* HCLKD0/PCLKD0 Clock Gate 1 Registers */ -#define S5PC100_CLKGATE_D01_DMC (1<<0) -#define S5PC100_CLKGATE_D01_SROMC (1<<1) -#define S5PC100_CLKGATE_D01_ONENAND (1<<2) -#define S5PC100_CLKGATE_D01_NFCON (1<<3) -#define S5PC100_CLKGATE_D01_INTMEM (1<<4) -#define S5PC100_CLKGATE_D01_EBI (1<<5) - -/* PCLKD0 Clock Gate 2 Registers */ -#define S5PC100_CLKGATE_D02_SECKEY (1<<1) -#define S5PC100_CLKGATE_D02_SDM (1<<2) - -/* HCLKD1/PCLKD1 Clock Gate 0 Registers */ -#define S5PC100_CLKGATE_D10_PDMA0 (1<<0) -#define S5PC100_CLKGATE_D10_PDMA1 (1<<1) -#define S5PC100_CLKGATE_D10_USBHOST (1<<2) -#define S5PC100_CLKGATE_D10_USBOTG (1<<3) -#define S5PC100_CLKGATE_D10_MODEMIF (1<<4) -#define S5PC100_CLKGATE_D10_HSMMC0 (1<<5) -#define S5PC100_CLKGATE_D10_HSMMC1 (1<<6) -#define S5PC100_CLKGATE_D10_HSMMC2 (1<<7) - -/* HCLKD1/PCLKD1 Clock Gate 1 Registers */ -#define S5PC100_CLKGATE_D11_LCD (1<<0) -#define S5PC100_CLKGATE_D11_ROTATOR (1<<1) -#define S5PC100_CLKGATE_D11_FIMC0 (1<<2) -#define S5PC100_CLKGATE_D11_FIMC1 (1<<3) -#define S5PC100_CLKGATE_D11_FIMC2 (1<<4) -#define S5PC100_CLKGATE_D11_JPEG (1<<5) -#define S5PC100_CLKGATE_D11_DSI (1<<6) -#define S5PC100_CLKGATE_D11_CSI (1<<7) -#define S5PC100_CLKGATE_D11_G3D (1<<8) - -/* HCLKD1/PCLKD1 Clock Gate 2 Registers */ -#define S5PC100_CLKGATE_D12_TV (1<<0) -#define S5PC100_CLKGATE_D12_VP (1<<1) -#define S5PC100_CLKGATE_D12_MIXER (1<<2) -#define S5PC100_CLKGATE_D12_HDMI (1<<3) -#define S5PC100_CLKGATE_D12_MFC (1<<4) - -/* HCLKD1/PCLKD1 Clock Gate 3 Registers */ -#define S5PC100_CLKGATE_D13_CHIPID (1<<0) -#define S5PC100_CLKGATE_D13_GPIO (1<<1) -#define S5PC100_CLKGATE_D13_APC (1<<2) -#define S5PC100_CLKGATE_D13_IEC (1<<3) -#define S5PC100_CLKGATE_D13_PWM (1<<6) -#define S5PC100_CLKGATE_D13_SYSTIMER (1<<7) -#define S5PC100_CLKGATE_D13_WDT (1<<8) -#define S5PC100_CLKGATE_D13_RTC (1<<9) - -/* HCLKD1/PCLKD1 Clock Gate 4 Registers */ -#define S5PC100_CLKGATE_D14_UART0 (1<<0) -#define S5PC100_CLKGATE_D14_UART1 (1<<1) -#define S5PC100_CLKGATE_D14_UART2 (1<<2) -#define S5PC100_CLKGATE_D14_UART3 (1<<3) -#define S5PC100_CLKGATE_D14_IIC (1<<4) -#define S5PC100_CLKGATE_D14_HDMI_IIC (1<<5) -#define S5PC100_CLKGATE_D14_SPI0 (1<<6) -#define S5PC100_CLKGATE_D14_SPI1 (1<<7) -#define S5PC100_CLKGATE_D14_SPI2 (1<<8) -#define S5PC100_CLKGATE_D14_IRDA (1<<9) -#define S5PC100_CLKGATE_D14_CCAN0 (1<<10) -#define S5PC100_CLKGATE_D14_CCAN1 (1<<11) -#define S5PC100_CLKGATE_D14_HSITX (1<<12) -#define S5PC100_CLKGATE_D14_HSIRX (1<<13) - -/* HCLKD1/PCLKD1 Clock Gate 5 Registers */ -#define S5PC100_CLKGATE_D15_IIS0 (1<<0) -#define S5PC100_CLKGATE_D15_IIS1 (1<<1) -#define S5PC100_CLKGATE_D15_IIS2 (1<<2) -#define S5PC100_CLKGATE_D15_AC97 (1<<3) -#define S5PC100_CLKGATE_D15_PCM0 (1<<4) -#define S5PC100_CLKGATE_D15_PCM1 (1<<5) -#define S5PC100_CLKGATE_D15_SPDIF (1<<6) -#define S5PC100_CLKGATE_D15_TSADC (1<<7) -#define S5PC100_CLKGATE_D15_KEYIF (1<<8) -#define S5PC100_CLKGATE_D15_CG (1<<9) - -/* HCLKD2 Clock Gate 0 Registers */ -#define S5PC100_CLKGATE_D20_HCLKD2 (1<<0) -#define S5PC100_CLKGATE_D20_I2SD2 (1<<1) - -/* Special Clock Gate 0 Registers */ -#define S5PC100_CLKGATE_SCLK0_HPM (1<<0) -#define S5PC100_CLKGATE_SCLK0_PWI (1<<1) -#define S5PC100_CLKGATE_SCLK0_ONENAND (1<<2) -#define S5PC100_CLKGATE_SCLK0_UART (1<<3) -#define S5PC100_CLKGATE_SCLK0_SPI0 (1<<4) -#define S5PC100_CLKGATE_SCLK0_SPI1 (1<<5) -#define S5PC100_CLKGATE_SCLK0_SPI2 (1<<6) -#define S5PC100_CLKGATE_SCLK0_SPI0_48 (1<<7) -#define S5PC100_CLKGATE_SCLK0_SPI1_48 (1<<8) -#define S5PC100_CLKGATE_SCLK0_SPI2_48 (1<<9) -#define S5PC100_CLKGATE_SCLK0_IRDA (1<<10) -#define S5PC100_CLKGATE_SCLK0_USBHOST (1<<11) -#define S5PC100_CLKGATE_SCLK0_MMC0 (1<<12) -#define S5PC100_CLKGATE_SCLK0_MMC1 (1<<13) -#define S5PC100_CLKGATE_SCLK0_MMC2 (1<<14) -#define S5PC100_CLKGATE_SCLK0_MMC0_48 (1<<15) -#define S5PC100_CLKGATE_SCLK0_MMC1_48 (1<<16) -#define S5PC100_CLKGATE_SCLK0_MMC2_48 (1<<17) - -/* Special Clock Gate 1 Registers */ -#define S5PC100_CLKGATE_SCLK1_LCD (1<<0) -#define S5PC100_CLKGATE_SCLK1_FIMC0 (1<<1) -#define S5PC100_CLKGATE_SCLK1_FIMC1 (1<<2) -#define S5PC100_CLKGATE_SCLK1_FIMC2 (1<<3) -#define S5PC100_CLKGATE_SCLK1_TV54 (1<<4) -#define S5PC100_CLKGATE_SCLK1_VDAC54 (1<<5) -#define S5PC100_CLKGATE_SCLK1_MIXER (1<<6) -#define S5PC100_CLKGATE_SCLK1_HDMI (1<<7) -#define S5PC100_CLKGATE_SCLK1_AUDIO0 (1<<8) -#define S5PC100_CLKGATE_SCLK1_AUDIO1 (1<<9) -#define S5PC100_CLKGATE_SCLK1_AUDIO2 (1<<10) -#define S5PC100_CLKGATE_SCLK1_SPDIF (1<<11) -#define S5PC100_CLKGATE_SCLK1_CAM (1<<12) - -#define S5PC100_SWRESET S5PC100_CLKREG_OTHER(0x000) -#define S5PC100_OND_SWRESET S5PC100_CLKREG_OTHER(0x008) -#define S5PC100_GEN_CTRL S5PC100_CLKREG_OTHER(0x100) -#define S5PC100_GEN_STATUS S5PC100_CLKREG_OTHER(0x104) -#define S5PC100_MEM_SYS_CFG S5PC100_CLKREG_OTHER(0x200) -#define S5PC100_CAM_MUX_SEL S5PC100_CLKREG_OTHER(0x300) -#define S5PC100_MIXER_OUT_SEL S5PC100_CLKREG_OTHER(0x304) -#define S5PC100_LPMP_MODE_SEL S5PC100_CLKREG_OTHER(0x308) -#define S5PC100_MIPI_PHY_CON0 S5PC100_CLKREG_OTHER(0x400) -#define S5PC100_MIPI_PHY_CON1 S5PC100_CLKREG_OTHER(0x414) -#define S5PC100_HDMI_PHY_CON0 S5PC100_CLKREG_OTHER(0x420) - -#define S5PC100_SWRESET_RESETVAL 0xc100 -#define S5PC100_OTHER_SYS_INT 24 -#define S5PC100_OTHER_STA_TYPE 23 -#define STA_TYPE_EXPON 0 -#define STA_TYPE_SFR 1 - -#define S5PC100_SLEEP_CFG_OSC_EN 0 - -/* OTHERS Resgister */ -#define S5PC100_OTHERS_USB_SIG_MASK (1 << 16) -#define S5PC100_OTHERS_MIPI_DPHY_EN (1 << 28) - -/* MIPI D-PHY Control Register 0 */ -#define S5PC100_MIPI_PHY_CON0_M_RESETN (1 << 1) -#define S5PC100_MIPI_PHY_CON0_S_RESETN (1 << 0) - -#endif /* _PLAT_REGS_CLOCK_H */ diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h deleted file mode 100644 index 02ffa491b53a..000000000000 --- a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h +++ /dev/null @@ -1,84 +0,0 @@ -/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h - * - * Copyright 2009 Samsung Electronics Co. - * Jongse Won <jongse.won@samsung.com> - * - * S5PC1XX clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARM_REGS_PWR -#define __ASM_ARM_REGS_PWR __FILE__ - -#define S5PC1XX_PWRREG(x) (S5PC1XX_VA_PWR + (x)) - -/* s5pc100 (0xE0108000) register for power management */ -#define S5PC100_PWR_CFG S5PC1XX_PWRREG(0x0) -#define S5PC100_EINT_WAKEUP_MASK S5PC1XX_PWRREG(0x4) -#define S5PC100_NORMAL_CFG S5PC1XX_PWRREG(0x10) -#define S5PC100_STOP_CFG S5PC1XX_PWRREG(0x14) -#define S5PC100_SLEEP_CFG S5PC1XX_PWRREG(0x18) -#define S5PC100_STOP_MEM_CFG S5PC1XX_PWRREG(0x1C) -#define S5PC100_OSC_FREQ S5PC1XX_PWRREG(0x100) -#define S5PC100_OSC_STABLE S5PC1XX_PWRREG(0x104) -#define S5PC100_PWR_STABLE S5PC1XX_PWRREG(0x108) -#define S5PC100_MTC_STABLE S5PC1XX_PWRREG(0x110) -#define S5PC100_CLAMP_STABLE S5PC1XX_PWRREG(0x114) -#define S5PC100_OTHERS S5PC1XX_PWRREG(0x200) -#define S5PC100_RST_STAT S5PC1XX_PWRREG(0x300) -#define S5PC100_WAKEUP_STAT S5PC1XX_PWRREG(0x304) -#define S5PC100_BLK_PWR_STAT S5PC1XX_PWRREG(0x308) -#define S5PC100_INFORM0 S5PC1XX_PWRREG(0x400) -#define S5PC100_INFORM1 S5PC1XX_PWRREG(0x404) -#define S5PC100_INFORM2 S5PC1XX_PWRREG(0x408) -#define S5PC100_INFORM3 S5PC1XX_PWRREG(0x40C) -#define S5PC100_INFORM4 S5PC1XX_PWRREG(0x410) -#define S5PC100_INFORM5 S5PC1XX_PWRREG(0x414) -#define S5PC100_INFORM6 S5PC1XX_PWRREG(0x418) -#define S5PC100_INFORM7 S5PC1XX_PWRREG(0x41C) -#define S5PC100_DCGIDX_MAP0 S5PC1XX_PWRREG(0x500) -#define S5PC100_DCGIDX_MAP1 S5PC1XX_PWRREG(0x504) -#define S5PC100_DCGIDX_MAP2 S5PC1XX_PWRREG(0x508) -#define S5PC100_DCGPERF_MAP0 S5PC1XX_PWRREG(0x50C) -#define S5PC100_DCGPERF_MAP1 S5PC1XX_PWRREG(0x510) -#define S5PC100_DVCIDX_MAP S5PC1XX_PWRREG(0x514) -#define S5PC100_FREQ_CPU S5PC1XX_PWRREG(0x518) -#define S5PC100_FREQ_DPM S5PC1XX_PWRREG(0x51C) -#define S5PC100_DVSEMCLK_EN S5PC1XX_PWRREG(0x520) -#define S5PC100_APLL_CON_L8 S5PC1XX_PWRREG(0x600) -#define S5PC100_APLL_CON_L7 S5PC1XX_PWRREG(0x604) -#define S5PC100_APLL_CON_L6 S5PC1XX_PWRREG(0x608) -#define S5PC100_APLL_CON_L5 S5PC1XX_PWRREG(0x60C) -#define S5PC100_APLL_CON_L4 S5PC1XX_PWRREG(0x610) -#define S5PC100_APLL_CON_L3 S5PC1XX_PWRREG(0x614) -#define S5PC100_APLL_CON_L2 S5PC1XX_PWRREG(0x618) -#define S5PC100_APLL_CON_L1 S5PC1XX_PWRREG(0x61C) -#define S5PC100_IEM_CONTROL S5PC1XX_PWRREG(0x620) -#define S5PC100_CLKDIV_IEM_L8 S5PC1XX_PWRREG(0x700) -#define S5PC100_CLKDIV_IEM_L7 S5PC1XX_PWRREG(0x704) -#define S5PC100_CLKDIV_IEM_L6 S5PC1XX_PWRREG(0x708) -#define S5PC100_CLKDIV_IEM_L5 S5PC1XX_PWRREG(0x70C) -#define S5PC100_CLKDIV_IEM_L4 S5PC1XX_PWRREG(0x710) -#define S5PC100_CLKDIV_IEM_L3 S5PC1XX_PWRREG(0x714) -#define S5PC100_CLKDIV_IEM_L2 S5PC1XX_PWRREG(0x718) -#define S5PC100_CLKDIV_IEM_L1 S5PC1XX_PWRREG(0x71C) -#define S5PC100_IEM_HPMCLK_DIV S5PC1XX_PWRREG(0x724) - -/* PWR_CFG */ -#define S5PC100_PWRCFG_CFG_DEEP_IDLE (1 << 31) -#define S5PC100_PWRCFG_CFG_WFI_MASK (3 << 5) -#define S5PC100_PWRCFG_CFG_WFI_IDLE (0 << 5) -#define S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE (1 << 5) -#define S5PC100_PWRCFG_CFG_WFI_STOP (2 << 5) -#define S5PC100_PWRCFG_CFG_WFI_SLEEP (3 << 5) - -/* SLEEP_CFG */ -#define S5PC100_SLEEP_OSC_EN_SLEEP (1 << 0) - -/* OTHERS */ -#define S5PC100_PMU_INT_DISABLE (1 << 24) - -#endif /* __ASM_ARM_REGS_PWR */ diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h deleted file mode 100644 index 2531f34a56f3..000000000000 --- a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h +++ /dev/null @@ -1,64 +0,0 @@ -/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * Header file for s5pc100 cpu support - * - * Based on plat-s3c64xx/include/plat/s3c6400.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5PC100 related SoCs */ -extern int s5pc100_init(void); -extern void s5pc100_map_io(void); -extern void s5pc100_init_clocks(int xtal); -extern int s5pc100_register_baseclocks(unsigned long xtal); -extern void s5pc100_init_irq(void); -extern void s5pc100_init_io(struct map_desc *mach_desc, int size); -extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s5pc100_register_clocks(void); -extern void s5pc100_setup_clocks(void); -extern struct sysdev_class s5pc100_sysclass; - -#define s5pc100_init_uarts s5pc100_common_init_uarts - -/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */ -extern void s5pc1xx_init_irq(u32 *vic_valid, int num); -extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size); - -/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */ -extern struct clk clk_hpll; -extern struct clk clk_hd0; -extern struct clk clk_pd0; -extern struct clk clk_54m; -extern void s5pc1xx_register_clocks(void); -extern int s5pc100_sclk0_ctrl(struct clk *clk, int enable); -extern int s5pc100_sclk1_ctrl(struct clk *clk, int enable); - -/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */ -extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[]; -extern struct platform_device s3c_device_g2d; -extern struct platform_device s3c_device_g3d; -extern struct platform_device s3c_device_vpp; -extern struct platform_device s3c_device_tvenc; -extern struct platform_device s3c_device_tvscaler; -extern struct platform_device s3c_device_rotator; -extern struct platform_device s3c_device_jpeg; -extern struct platform_device s3c_device_onenand; -extern struct platform_device s3c_device_usb_otghcd; -extern struct platform_device s3c_device_keypad; -extern struct platform_device s3c_device_ts; -extern struct platform_device s3c_device_g3d; -extern struct platform_device s3c_device_smc911x; -extern struct platform_device s3c_device_fimc0; -extern struct platform_device s3c_device_fimc1; -extern struct platform_device s3c_device_mfc; -extern struct platform_device s3c_device_ac97; -extern struct platform_device s3c_device_fimc0; -extern struct platform_device s3c_device_fimc1; -extern struct platform_device s3c_device_fimc2; - diff --git a/arch/arm/plat-s5pc1xx/irq-eint.c b/arch/arm/plat-s5pc1xx/irq-eint.c deleted file mode 100644 index 373122f57d56..000000000000 --- a/arch/arm/plat-s5pc1xx/irq-eint.c +++ /dev/null @@ -1,281 +0,0 @@ -/* - * linux/arch/arm/plat-s5pc1xx/irq-eint.c - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * Kyungin Park <kyungmin.park@samsung.com> - * - * Based on plat-s3c64xx/irq-eint.c - * - * S5PC1XX - Interrupt handling for IRQ_EINT(x) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/sysdev.h> -#include <linux/pm.h> -#include <linux/gpio.h> - -#include <asm/hardware/vic.h> - -#include <mach/map.h> - -#include <plat/gpio-cfg.h> -#include <plat/gpio-ext.h> -#include <plat/pm.h> -#include <plat/regs-gpio.h> -#include <plat/regs-irqtype.h> - -/* - * bank is a group of external interrupt - * bank0 means EINT0 ... EINT7 - * bank1 means EINT8 ... EINT15 - * bank2 means EINT16 ... EINT23 - * bank3 means EINT24 ... EINT31 - */ - -static inline int s3c_get_eint(unsigned int irq) -{ - int real; - - if (irq < IRQ_EINT16_31) - real = (irq - IRQ_EINT0); - else - real = (irq - S3C_IRQ_EINT_BASE) + IRQ_EINT16_31 - IRQ_EINT0; - - return real; -} - -static inline int s3c_get_bank(unsigned int irq) -{ - return s3c_get_eint(irq) >> 3; -} - -static inline int s3c_eint_to_bit(unsigned int irq) -{ - int real, bit; - - real = s3c_get_eint(irq); - bit = 1 << (real & (8 - 1)); - - return bit; -} - -static inline void s3c_irq_eint_mask(unsigned int irq) -{ - u32 mask; - u32 bank = s3c_get_bank(irq); - - mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank)); - mask |= s3c_eint_to_bit(irq); - __raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank)); -} - -static void s3c_irq_eint_unmask(unsigned int irq) -{ - u32 mask; - u32 bank = s3c_get_bank(irq); - - mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank)); - mask &= ~(s3c_eint_to_bit(irq)); - __raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank)); -} - -static inline void s3c_irq_eint_ack(unsigned int irq) -{ - u32 bank = s3c_get_bank(irq); - - __raw_writel(s3c_eint_to_bit(irq), S5PC1XX_WKUP_INT_PEND(bank)); -} - -static void s3c_irq_eint_maskack(unsigned int irq) -{ - /* compiler should in-line these */ - s3c_irq_eint_mask(irq); - s3c_irq_eint_ack(irq); -} - -static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) -{ - u32 bank = s3c_get_bank(irq); - int real = s3c_get_eint(irq); - int gpio, shift, sfn; - u32 ctrl, con = 0; - - switch (type) { - case IRQ_TYPE_NONE: - printk(KERN_WARNING "No edge setting!\n"); - break; - - case IRQ_TYPE_EDGE_RISING: - con = S5PC1XX_WKUP_INT_RISEEDGE; - break; - - case IRQ_TYPE_EDGE_FALLING: - con = S5PC1XX_WKUP_INT_FALLEDGE; - break; - - case IRQ_TYPE_EDGE_BOTH: - con = S5PC1XX_WKUP_INT_BOTHEDGE; - break; - - case IRQ_TYPE_LEVEL_LOW: - con = S5PC1XX_WKUP_INT_LOWLEV; - break; - - case IRQ_TYPE_LEVEL_HIGH: - con = S5PC1XX_WKUP_INT_HILEV; - break; - - default: - printk(KERN_ERR "No such irq type %d", type); - return -EINVAL; - } - - gpio = real & (8 - 1); - shift = gpio << 2; - - ctrl = __raw_readl(S5PC1XX_WKUP_INT_CON(bank)); - ctrl &= ~(0x7 << shift); - ctrl |= con << shift; - __raw_writel(ctrl, S5PC1XX_WKUP_INT_CON(bank)); - - switch (real) { - case 0 ... 7: - gpio = S5PC100_GPH0(gpio); - break; - case 8 ... 15: - gpio = S5PC100_GPH1(gpio); - break; - case 16 ... 23: - gpio = S5PC100_GPH2(gpio); - break; - case 24 ... 31: - gpio = S5PC100_GPH3(gpio); - break; - default: - return -EINVAL; - } - - sfn = S3C_GPIO_SFN(0x2); - s3c_gpio_cfgpin(gpio, sfn); - - return 0; -} - -static struct irq_chip s3c_irq_eint = { - .name = "EINT", - .mask = s3c_irq_eint_mask, - .unmask = s3c_irq_eint_unmask, - .mask_ack = s3c_irq_eint_maskack, - .ack = s3c_irq_eint_ack, - .set_type = s3c_irq_eint_set_type, - .set_wake = s3c_irqext_wake, -}; - -/* s3c_irq_demux_eint - * - * This function demuxes the IRQ from external interrupts, - * from IRQ_EINT(16) to IRQ_EINT(31). It is designed to be inlined into - * the specific handlers s3c_irq_demux_eintX_Y. - */ -static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end) -{ - u32 status = __raw_readl(S5PC1XX_WKUP_INT_PEND((start >> 3))); - u32 mask = __raw_readl(S5PC1XX_WKUP_INT_MASK((start >> 3))); - unsigned int irq; - - status &= ~mask; - status &= (1 << (end - start + 1)) - 1; - - for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) { - if (status & 1) - generic_handle_irq(irq); - - status >>= 1; - } -} - -static void s3c_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) -{ - s3c_irq_demux_eint(16, 23); - s3c_irq_demux_eint(24, 31); -} - -/* - * Handle EINT0 ... EINT15 at VIC directly - */ -static void s3c_irq_vic_eint_mask(unsigned int irq) -{ - void __iomem *base = get_irq_chip_data(irq); - unsigned int real; - - s3c_irq_eint_mask(irq); - real = s3c_get_eint(irq); - writel(1 << real, base + VIC_INT_ENABLE_CLEAR); -} - -static void s3c_irq_vic_eint_unmask(unsigned int irq) -{ - void __iomem *base = get_irq_chip_data(irq); - unsigned int real; - - s3c_irq_eint_unmask(irq); - real = s3c_get_eint(irq); - writel(1 << real, base + VIC_INT_ENABLE); -} - -static inline void s3c_irq_vic_eint_ack(unsigned int irq) -{ - u32 bit; - u32 bank = s3c_get_bank(irq); - - bit = s3c_eint_to_bit(irq); - __raw_writel(bit, S5PC1XX_WKUP_INT_PEND(bank)); -} - -static void s3c_irq_vic_eint_maskack(unsigned int irq) -{ - /* compiler should in-line these */ - s3c_irq_vic_eint_mask(irq); - s3c_irq_vic_eint_ack(irq); -} - -static struct irq_chip s3c_irq_vic_eint = { - .name = "EINT", - .mask = s3c_irq_vic_eint_mask, - .unmask = s3c_irq_vic_eint_unmask, - .mask_ack = s3c_irq_vic_eint_maskack, - .ack = s3c_irq_vic_eint_ack, - .set_type = s3c_irq_eint_set_type, - .set_wake = s3c_irqext_wake, -}; - -static int __init s5pc1xx_init_irq_eint(void) -{ - int irq; - - for (irq = IRQ_EINT0; irq <= IRQ_EINT15; irq++) { - set_irq_chip(irq, &s3c_irq_vic_eint); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) { - set_irq_chip(irq, &s3c_irq_eint); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - set_irq_chained_handler(IRQ_EINT16_31, s3c_irq_demux_eint16_31); - - return 0; -} - -arch_initcall(s5pc1xx_init_irq_eint); diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c deleted file mode 100644 index bfc524827819..000000000000 --- a/arch/arm/plat-s5pc1xx/irq.c +++ /dev/null @@ -1,75 +0,0 @@ -/* arch/arm/plat-s5pc1xx/irq.c - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC1XX - Interrupt handling - * - * Based on plat-s3c64xx/irq.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> - -#include <asm/hardware/vic.h> - -#include <mach/map.h> -#include <plat/irq-vic-timer.h> -#include <plat/irq-uart.h> -#include <plat/cpu.h> - -/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3] - * are consecutive when looking up the interrupt in the demux routines. - */ -static struct s3c_uart_irq uart_irqs[] = { - [0] = { - .regs = (void *)S3C_VA_UART0, - .base_irq = IRQ_S3CUART_BASE0, - .parent_irq = IRQ_UART0, - }, - [1] = { - .regs = (void *)S3C_VA_UART1, - .base_irq = IRQ_S3CUART_BASE1, - .parent_irq = IRQ_UART1, - }, - [2] = { - .regs = (void *)S3C_VA_UART2, - .base_irq = IRQ_S3CUART_BASE2, - .parent_irq = IRQ_UART2, - }, - [3] = { - .regs = (void *)S3C_VA_UART3, - .base_irq = IRQ_S3CUART_BASE3, - .parent_irq = IRQ_UART3, - }, -}; - -void __init s5pc1xx_init_irq(u32 *vic_valid, int num) -{ - int i; - - printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); - - /* initialise the pair of VICs */ - for (i = 0; i < num; i++) - vic_init((void *)S5PC1XX_VA_VIC(i), S3C_IRQ(i * S3C_IRQ_OFFSET), - vic_valid[i], 0); - - /* add the timer sub-irqs */ - - s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0); - s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1); - s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2); - s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3); - s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4); - - s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs)); -} - - diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c deleted file mode 100644 index 2bf6c57a96a2..000000000000 --- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c +++ /dev/null @@ -1,876 +0,0 @@ -/* linux/arch/arm/plat-s5pc1xx/s5pc100-clock.c - * - * Copyright 2009 Samsung Electronics, Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC100 based common clock support - * - * Based on plat-s3c64xx/s3c6400-clock.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/sysdev.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> - -#include <plat/cpu-freq.h> - -#include <plat/regs-clock.h> -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/devs.h> -#include <plat/s5pc100.h> - -/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call - * ext_xtal_mux for want of an actual name from the manual. -*/ - -static struct clk clk_ext_xtal_mux = { - .name = "ext_xtal", - .id = -1, -}; - -#define clk_fin_apll clk_ext_xtal_mux -#define clk_fin_mpll clk_ext_xtal_mux -#define clk_fin_epll clk_ext_xtal_mux -#define clk_fin_hpll clk_ext_xtal_mux - -#define clk_fout_mpll clk_mpll -#define clk_vclk_54m clk_54m - -/* APLL */ -static struct clk clk_fout_apll = { - .name = "fout_apll", - .id = -1, - .rate = 27000000, -}; - -static struct clk *clk_src_apll_list[] = { - [0] = &clk_fin_apll, - [1] = &clk_fout_apll, -}; - -static struct clksrc_sources clk_src_apll = { - .sources = clk_src_apll_list, - .nr_sources = ARRAY_SIZE(clk_src_apll_list), -}; - -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - .id = -1, - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 0, .size = 1, }, -}; - -static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned int ratio; - - ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_APLL_MASK; - ratio >>= S5PC100_CLKDIV0_APLL_SHIFT; - - return rate / (ratio + 1); -} - -static struct clk clk_dout_apll = { - .name = "dout_apll", - .id = -1, - .parent = &clk_mout_apll.clk, - .ops = &(struct clk_ops) { - .get_rate = s5pc100_clk_dout_apll_get_rate, - }, -}; - -static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned int ratio; - - ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_ARM_MASK; - ratio >>= S5PC100_CLKDIV0_ARM_SHIFT; - - return rate / (ratio + 1); -} - -static unsigned long s5pc100_clk_arm_round_rate(struct clk *clk, - unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - u32 div; - - if (parent < rate) - return rate; - - div = (parent / rate) - 1; - if (div > S5PC100_CLKDIV0_ARM_MASK) - div = S5PC100_CLKDIV0_ARM_MASK; - - return parent / (div + 1); -} - -static int s5pc100_clk_arm_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - u32 div; - u32 val; - - if (rate < parent / (S5PC100_CLKDIV0_ARM_MASK + 1)) - return -EINVAL; - - rate = clk_round_rate(clk, rate); - div = clk_get_rate(clk->parent) / rate; - - val = __raw_readl(S5PC100_CLKDIV0); - val &= S5PC100_CLKDIV0_ARM_MASK; - val |= (div - 1); - __raw_writel(val, S5PC100_CLKDIV0); - - return 0; -} - -static struct clk clk_arm = { - .name = "armclk", - .id = -1, - .parent = &clk_dout_apll, - .ops = &(struct clk_ops) { - .get_rate = s5pc100_clk_arm_get_rate, - .set_rate = s5pc100_clk_arm_set_rate, - .round_rate = s5pc100_clk_arm_round_rate, - }, -}; - -static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned int ratio; - - ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_D0_MASK; - ratio >>= S5PC100_CLKDIV0_D0_SHIFT; - - return rate / (ratio + 1); -} - -static struct clk clk_dout_d0_bus = { - .name = "dout_d0_bus", - .id = -1, - .parent = &clk_arm, - .ops = &(struct clk_ops) { - .get_rate = s5pc100_clk_dout_d0_bus_get_rate, - }, -}; - -static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned int ratio; - - ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_PCLKD0_MASK; - ratio >>= S5PC100_CLKDIV0_PCLKD0_SHIFT; - - return rate / (ratio + 1); -} - -static struct clk clk_dout_pclkd0 = { - .name = "dout_pclkd0", - .id = -1, - .parent = &clk_dout_d0_bus, - .ops = &(struct clk_ops) { - .get_rate = s5pc100_clk_dout_pclkd0_get_rate, - }, -}; - -static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned int ratio; - - ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_APLL2_MASK; - ratio >>= S5PC100_CLKDIV1_APLL2_SHIFT; - - return rate / (ratio + 1); -} - -static struct clk clk_dout_apll2 = { - .name = "dout_apll2", - .id = -1, - .parent = &clk_mout_apll.clk, - .ops = &(struct clk_ops) { - .get_rate = s5pc100_clk_dout_apll2_get_rate, - }, -}; - -/* MPLL */ -static struct clk *clk_src_mpll_list[] = { - [0] = &clk_fin_mpll, - [1] = &clk_fout_mpll, -}; - -static struct clksrc_sources clk_src_mpll = { - .sources = clk_src_mpll_list, - .nr_sources = ARRAY_SIZE(clk_src_mpll_list), -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - .id = -1, - }, - .sources = &clk_src_mpll, - .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 4, .size = 1, }, -}; - -static struct clk *clkset_am_list[] = { - [0] = &clk_mout_mpll.clk, - [1] = &clk_dout_apll2, -}; - -static struct clksrc_sources clk_src_am = { - .sources = clkset_am_list, - .nr_sources = ARRAY_SIZE(clkset_am_list), -}; - -static struct clksrc_clk clk_mout_am = { - .clk = { - .name = "mout_am", - .id = -1, - }, - .sources = &clk_src_am, - .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 16, .size = 1, }, -}; - -static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned int ratio; - - printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - - ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_D1_MASK; - ratio >>= S5PC100_CLKDIV1_D1_SHIFT; - - return rate / (ratio + 1); -} - -static struct clk clk_dout_d1_bus = { - .name = "dout_d1_bus", - .id = -1, - .parent = &clk_mout_am.clk, - .ops = &(struct clk_ops) { - .get_rate = s5pc100_clk_dout_d1_bus_get_rate, - }, -}; - -static struct clk *clkset_onenand_list[] = { - [0] = &clk_dout_d0_bus, - [1] = &clk_dout_d1_bus, -}; - -static struct clksrc_sources clk_src_onenand = { - .sources = clkset_onenand_list, - .nr_sources = ARRAY_SIZE(clkset_onenand_list), -}; - -static struct clksrc_clk clk_mout_onenand = { - .clk = { - .name = "mout_onenand", - .id = -1, - }, - .sources = &clk_src_onenand, - .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 24, .size = 1, }, -}; - -static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned int ratio; - - printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - - ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_PCLKD1_MASK; - ratio >>= S5PC100_CLKDIV1_PCLKD1_SHIFT; - - return rate / (ratio + 1); -} - -static struct clk clk_dout_pclkd1 = { - .name = "dout_pclkd1", - .id = -1, - .parent = &clk_dout_d1_bus, - .ops = &(struct clk_ops) { - .get_rate = s5pc100_clk_dout_pclkd1_get_rate, - }, -}; - -static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned int ratio; - - printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - - ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL2_MASK; - ratio >>= S5PC100_CLKDIV1_MPLL2_SHIFT; - - return rate / (ratio + 1); -} - -static struct clk clk_dout_mpll2 = { - .name = "dout_mpll2", - .id = -1, - .parent = &clk_mout_am.clk, - .ops = &(struct clk_ops) { - .get_rate = s5pc100_clk_dout_mpll2_get_rate, - }, -}; - -static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned int ratio; - - printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - - ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_CAM_MASK; - ratio >>= S5PC100_CLKDIV1_CAM_SHIFT; - - return rate / (ratio + 1); -} - -static struct clk clk_dout_cam = { - .name = "dout_cam", - .id = -1, - .parent = &clk_dout_mpll2, - .ops = &(struct clk_ops) { - .get_rate = s5pc100_clk_dout_cam_get_rate, - }, -}; - -static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned int ratio; - - printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); - - ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL_MASK; - ratio >>= S5PC100_CLKDIV1_MPLL_SHIFT; - - return rate / (ratio + 1); -} - -static struct clk clk_dout_mpll = { - .name = "dout_mpll", - .id = -1, - .parent = &clk_mout_am.clk, - .ops = &(struct clk_ops) { - .get_rate = s5pc100_clk_dout_mpll_get_rate, - }, -}; - -/* EPLL */ -static struct clk clk_fout_epll = { - .name = "fout_epll", - .id = -1, -}; - -static struct clk *clk_src_epll_list[] = { - [0] = &clk_fin_epll, - [1] = &clk_fout_epll, -}; - -static struct clksrc_sources clk_src_epll = { - .sources = clk_src_epll_list, - .nr_sources = ARRAY_SIZE(clk_src_epll_list), -}; - -static struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - .id = -1, - }, - .sources = &clk_src_epll, - .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 8, .size = 1, }, -}; - -/* HPLL */ -static struct clk clk_fout_hpll = { - .name = "fout_hpll", - .id = -1, -}; - -static struct clk *clk_src_hpll_list[] = { - [0] = &clk_27m, - [1] = &clk_fout_hpll, -}; - -static struct clksrc_sources clk_src_hpll = { - .sources = clk_src_hpll_list, - .nr_sources = ARRAY_SIZE(clk_src_hpll_list), -}; - -static struct clksrc_clk clk_mout_hpll = { - .clk = { - .name = "mout_hpll", - .id = -1, - }, - .sources = &clk_src_hpll, - .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 12, .size = 1, }, -}; - -/* Peripherals */ -/* - * The peripheral clocks are all controlled via clocksource followed - * by an optional divider and gate stage. We currently roll this into - * one clock which hides the intermediate clock from the mux. - * - * Note, the JPEG clock can only be an even divider... - * - * The scaler and LCD clocks depend on the S5PC100 version, and also - * have a common parent divisor so are not included here. - */ - -static struct clk clk_iis_cd0 = { - .name = "iis_cdclk0", - .id = -1, -}; - -static struct clk clk_iis_cd1 = { - .name = "iis_cdclk1", - .id = -1, -}; - -static struct clk clk_iis_cd2 = { - .name = "iis_cdclk2", - .id = -1, -}; - -static struct clk clk_pcm_cd0 = { - .name = "pcm_cdclk0", - .id = -1, -}; - -static struct clk clk_pcm_cd1 = { - .name = "pcm_cdclk1", - .id = -1, -}; - -static struct clk *clkset_audio0_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_fin_epll, - &clk_iis_cd0, - &clk_pcm_cd0, - &clk_mout_hpll.clk, -}; - -static struct clksrc_sources clkset_audio0 = { - .sources = clkset_audio0_list, - .nr_sources = ARRAY_SIZE(clkset_audio0_list), -}; - -static struct clk *clkset_spi_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll2, - &clk_fin_epll, - &clk_mout_hpll.clk, -}; - -static struct clksrc_sources clkset_spi = { - .sources = clkset_spi_list, - .nr_sources = ARRAY_SIZE(clkset_spi_list), -}; - -static struct clk *clkset_uart_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, -}; - -static struct clksrc_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), -}; - -static struct clk *clkset_audio1_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_fin_epll, - &clk_iis_cd1, - &clk_pcm_cd1, - &clk_mout_hpll.clk, -}; - -static struct clksrc_sources clkset_audio1 = { - .sources = clkset_audio1_list, - .nr_sources = ARRAY_SIZE(clkset_audio1_list), -}; - -static struct clk *clkset_audio2_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_fin_epll, - &clk_iis_cd2, - &clk_mout_hpll.clk, -}; - -static struct clksrc_sources clkset_audio2 = { - .sources = clkset_audio2_list, - .nr_sources = ARRAY_SIZE(clkset_audio2_list), -}; - -static struct clksrc_clk clksrc_audio[] = { - { - .clk = { - .name = "audio-bus", - .id = 0, - .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO0, - .enable = s5pc100_sclk1_ctrl, - }, - .sources = &clkset_audio0, - .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 12, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 12, .size = 3, }, - }, { - .clk = { - .name = "audio-bus", - .id = 1, - .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO1, - .enable = s5pc100_sclk1_ctrl, - }, - .sources = &clkset_audio1, - .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 16, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 16, .size = 3, }, - }, { - .clk = { - .name = "audio-bus", - .id = 2, - .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO2, - .enable = s5pc100_sclk1_ctrl, - }, - .sources = &clkset_audio2, - .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 20, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 20, .size = 3, }, - }, -}; - -static struct clk *clkset_spdif_list[] = { - &clksrc_audio[0].clk, - &clksrc_audio[1].clk, - &clksrc_audio[2].clk, -}; - -static struct clksrc_sources clkset_spdif = { - .sources = clkset_spdif_list, - .nr_sources = ARRAY_SIZE(clkset_spdif_list), -}; - -static struct clk *clkset_lcd_fimc_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_mout_hpll.clk, - &clk_vclk_54m, -}; - -static struct clksrc_sources clkset_lcd_fimc = { - .sources = clkset_lcd_fimc_list, - .nr_sources = ARRAY_SIZE(clkset_lcd_fimc_list), -}; - -static struct clk *clkset_mmc_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_fin_epll, - &clk_mout_hpll.clk , -}; - -static struct clksrc_sources clkset_mmc = { - .sources = clkset_mmc_list, - .nr_sources = ARRAY_SIZE(clkset_mmc_list), -}; - -static struct clk *clkset_usbhost_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll, - &clk_mout_hpll.clk, - &clk_48m, -}; - -static struct clksrc_sources clkset_usbhost = { - .sources = clkset_usbhost_list, - .nr_sources = ARRAY_SIZE(clkset_usbhost_list), -}; - -static struct clksrc_clk clksrc_clks[] = { - { - .clk = { - .name = "spi_bus", - .id = 0, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0, - .enable = s5pc100_sclk0_ctrl, - - }, - .sources = &clkset_spi, - .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 4, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 4, .size = 2, }, - }, { - .clk = { - .name = "spi_bus", - .id = 1, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1, - .enable = s5pc100_sclk0_ctrl, - }, - .sources = &clkset_spi, - .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 8, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 8, .size = 2, }, - }, { - .clk = { - .name = "spi_bus", - .id = 2, - .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2, - .enable = s5pc100_sclk0_ctrl, - }, - .sources = &clkset_spi, - .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 12, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 12, .size = 2, }, - }, { - .clk = { - .name = "uclk1", - .id = -1, - .ctrlbit = S5PC100_CLKGATE_SCLK0_UART, - .enable = s5pc100_sclk0_ctrl, - }, - .sources = &clkset_uart, - .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 0, .size = 3, }, - .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 0, .size = 1, }, - }, { - .clk = { - .name = "spdif", - .id = -1, - }, - .sources = &clkset_spdif, - .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 24, .size = 2, }, - }, { - .clk = { - .name = "lcd", - .id = -1, - .ctrlbit = S5PC100_CLKGATE_SCLK1_LCD, - .enable = s5pc100_sclk1_ctrl, - }, - .sources = &clkset_lcd_fimc, - .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 12, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 12, .size = 2, }, - }, { - .clk = { - .name = "fimc", - .id = 0, - .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC0, - .enable = s5pc100_sclk1_ctrl, - }, - .sources = &clkset_lcd_fimc, - .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 16, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 16, .size = 2, }, - }, { - .clk = { - .name = "fimc", - .id = 1, - .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC1, - .enable = s5pc100_sclk1_ctrl, - }, - .sources = &clkset_lcd_fimc, - .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 20, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 20, .size = 2, }, - }, { - .clk = { - .name = "fimc", - .id = 2, - .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC2, - .enable = s5pc100_sclk1_ctrl, - }, - .sources = &clkset_lcd_fimc, - .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 24, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 24, .size = 2, }, - }, { - .clk = { - .name = "mmc_bus", - .id = 0, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0, - .enable = s5pc100_sclk0_ctrl, - }, - .sources = &clkset_mmc, - .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 0, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 0, .size = 2, }, - }, { - .clk = { - .name = "mmc_bus", - .id = 1, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1, - .enable = s5pc100_sclk0_ctrl, - }, - .sources = &clkset_mmc, - .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 4, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 4, .size = 2, }, - }, { - .clk = { - .name = "mmc_bus", - .id = 2, - .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2, - .enable = s5pc100_sclk0_ctrl, - }, - .sources = &clkset_mmc, - .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 8, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 8, .size = 2, }, - }, { - .clk = { - .name = "usbhost", - .id = -1, - .ctrlbit = S5PC100_CLKGATE_SCLK0_USBHOST, - .enable = s5pc100_sclk0_ctrl, - }, - .sources = &clkset_usbhost, - .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 20, .size = 4, }, - .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 20, .size = 2, }, - } -}; - -/* Clock initialisation code */ - -static struct clksrc_clk *init_parents[] = { - &clk_mout_apll, - &clk_mout_mpll, - &clk_mout_am, - &clk_mout_onenand, - &clk_mout_epll, - &clk_mout_hpll, -}; - -#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) - -void __init_or_cpufreq s5pc100_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long xtal; - unsigned long armclk; - unsigned long hclkd0; - unsigned long hclk; - unsigned long pclkd0; - unsigned long pclk; - unsigned long apll, mpll, epll, hpll; - unsigned int ptr; - u32 clkdiv0, clkdiv1; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - clkdiv0 = __raw_readl(S5PC100_CLKDIV0); - clkdiv1 = __raw_readl(S5PC100_CLKDIV1); - - printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", __func__, clkdiv0, clkdiv1); - - xtal_clk = clk_get(NULL, "xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_APLL_CON)); - mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_MPLL_CON)); - epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_EPLL_CON)); - hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON)); - - printk(KERN_INFO "S5PC100: Apll=%ld.%03ld Mhz, Mpll=%ld.%03ld Mhz" - ", Epll=%ld.%03ld Mhz, Hpll=%ld.%03ld Mhz\n", - print_mhz(apll), print_mhz(mpll), - print_mhz(epll), print_mhz(hpll)); - - armclk = apll / GET_DIV(clkdiv0, S5PC100_CLKDIV0_APLL); - armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM); - hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0); - pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0); - hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1); - pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1); - - printk(KERN_INFO "S5PC100: ARMCLK=%ld.%03ld MHz, HCLKD0=%ld.%03ld MHz," - " PCLKD0=%ld.%03ld MHz\n, HCLK=%ld.%03ld MHz," - " PCLK=%ld.%03ld MHz\n", - print_mhz(armclk), print_mhz(hclkd0), - print_mhz(pclkd0), print_mhz(hclk), print_mhz(pclk)); - - clk_fout_apll.rate = apll; - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - clk_fout_hpll.rate = hpll; - - clk_h.rate = hclk; - clk_p.rate = pclk; - clk_f.rate = armclk; - - for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) - s3c_set_clksrc(init_parents[ptr], true); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrc_audio); ptr++) - s3c_set_clksrc(clksrc_audio + ptr, true); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++) - s3c_set_clksrc(clksrc_clks + ptr, true); -} - -static struct clk *clks[] __initdata = { - &clk_ext_xtal_mux, - &clk_dout_apll, - &clk_dout_d0_bus, - &clk_dout_pclkd0, - &clk_dout_apll2, - &clk_mout_apll.clk, - &clk_mout_mpll.clk, - &clk_mout_epll.clk, - &clk_mout_hpll.clk, - &clk_mout_am.clk, - &clk_dout_d1_bus, - &clk_mout_onenand.clk, - &clk_dout_pclkd1, - &clk_dout_mpll2, - &clk_dout_cam, - &clk_dout_mpll, - &clk_fout_epll, - &clk_iis_cd0, - &clk_iis_cd1, - &clk_iis_cd2, - &clk_pcm_cd0, - &clk_pcm_cd1, - &clk_arm, -}; - -void __init s5pc100_register_clocks(void) -{ - struct clk *clkp; - int ret; - int ptr; - - for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { - clkp = clks[ptr]; - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - s3c_register_clksrc(clksrc_audio, ARRAY_SIZE(clksrc_audio)); - s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks)); -} diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 229919e9744c..b787d576d4b3 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -6,7 +6,7 @@ config PLAT_SAMSUNG bool - depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX + depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX select NO_IOPORT default y help @@ -170,6 +170,11 @@ config S3C_DEV_I2C1 help Compile in platform device definitions for I2C channel 1 +config S3C_DEV_I2C2 + bool + help + Compile in platform device definitions for I2C channel 2 + config S3C_DEV_FB bool help diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 48288499a3b9..606ec8424c80 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o obj-y += dev-i2c0.o obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o +obj-$(CONFIG_S3C_DEV_I2C2) += dev-i2c2.o obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o obj-y += dev-uart.o obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o diff --git a/arch/arm/plat-samsung/dev-i2c2.c b/arch/arm/plat-samsung/dev-i2c2.c new file mode 100644 index 000000000000..07036dee09e7 --- /dev/null +++ b/arch/arm/plat-samsung/dev-i2c2.c @@ -0,0 +1,70 @@ +/* linux/arch/arm/plat-s3c/dev-i2c2.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S3C series device definition for i2c device 2 + * + * Based on plat-samsung/dev-i2c0.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/gfp.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/regs-iic.h> +#include <plat/iic.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +static struct resource s3c_i2c_resource[] = { + [0] = { + .start = S3C_PA_IIC2, + .end = S3C_PA_IIC2 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_CAN0, + .end = IRQ_CAN0, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_i2c2 = { + .name = "s3c2410-i2c", + .id = 2, + .num_resources = ARRAY_SIZE(s3c_i2c_resource), + .resource = s3c_i2c_resource, +}; + +static struct s3c2410_platform_i2c default_i2c_data2 __initdata = { + .flags = 0, + .bus_num = 2, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, +}; + +void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) + pd = &default_i2c_data2; + + npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + else if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c2_cfg_gpio; + + s3c_device_i2c2.dev.platform_data = npd; +} diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index cd74a0700fc7..8d516d498051 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -45,6 +45,7 @@ extern struct platform_device s3c_device_lcd; extern struct platform_device s3c_device_wdt; extern struct platform_device s3c_device_i2c0; extern struct platform_device s3c_device_i2c1; +extern struct platform_device s3c_device_i2c2; extern struct platform_device s3c_device_rtc; extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_sdi; @@ -89,6 +90,13 @@ extern struct platform_device s5p6442_device_spi; extern struct platform_device s5p6440_device_pcm; extern struct platform_device s5p6440_device_iis; +extern struct platform_device s5pc100_device_ac97; +extern struct platform_device s5pc100_device_pcm0; +extern struct platform_device s5pc100_device_pcm1; +extern struct platform_device s5pc100_device_iis0; +extern struct platform_device s5pc100_device_iis1; +extern struct platform_device s5pc100_device_iis2; + /* s3c2440 specific devices */ #ifdef CONFIG_CPU_S3C2440 diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index 1f85649d8c18..27d3b497b55b 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -84,4 +84,11 @@ extern void s3c64xx_fb_gpio_setup_24bpp(void); */ extern void s5pc100_fb_gpio_setup_24bpp(void); +/** + * s5pv210_fb_gpio_setup_24bpp() - S5PV210/S5PC110 setup function for 24bpp LCD + * + * Initialise the GPIO for an 24bpp LCD display on the RGB interface. + */ +extern void s5pv210_fb_gpio_setup_24bpp(void); + #endif /* __PLAT_S3C_FB_H */ diff --git a/arch/arm/plat-samsung/include/plat/iic-core.h b/arch/arm/plat-samsung/include/plat/iic-core.h index 36397ca20962..f182669b8e8e 100644 --- a/arch/arm/plat-samsung/include/plat/iic-core.h +++ b/arch/arm/plat-samsung/include/plat/iic-core.h @@ -32,4 +32,11 @@ static inline void s3c_i2c1_setname(char *name) #endif } +static inline void s3c_i2c2_setname(char *name) +{ +#ifdef CONFIG_S3C_DEV_I2C2 + s3c_device_i2c2.name = name; +#endif +} + #endif /* __ASM_ARCH_IIC_H */ diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h index 3083df00dee6..133308bf595d 100644 --- a/arch/arm/plat-samsung/include/plat/iic.h +++ b/arch/arm/plat-samsung/include/plat/iic.h @@ -54,9 +54,11 @@ struct s3c2410_platform_i2c { */ extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c); extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c); /* defined by architecture to configure gpio */ extern void s3c_i2c0_cfg_gpio(struct platform_device *dev); extern void s3c_i2c1_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c2_cfg_gpio(struct platform_device *dev); #endif /* __ASM_ARCH_IIC_H */ diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 7d07cd7aa4f2..13f9fb20900a 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -75,6 +75,9 @@ extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w); extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w); extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w); +extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w); +extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w); +extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w); /* S3C6400 SDHCI setup */ @@ -218,4 +221,56 @@ static inline void s5pc100_default_sdhci1(void) { } static inline void s5pc100_default_sdhci2(void) { } #endif /* CONFIG_S5PC100_SETUP_SDHCI */ + +/* S5PC110 SDHCI setup */ +#ifdef CONFIG_S5PV210_SETUP_SDHCI +extern char *s5pv210_hsmmc_clksrcs[4]; + +extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card); + +#ifdef CONFIG_S3C_DEV_HSMMC +static inline void s5pv210_default_sdhci0(void) +{ + s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs; + s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio; + s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; +} +#else +static inline void s5pc100_default_sdhci0(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC */ + +#ifdef CONFIG_S3C_DEV_HSMMC1 +static inline void s5pv210_default_sdhci1(void) +{ + s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs; + s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio; + s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; +} +#else +static inline void s5pv210_default_sdhci1(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC1 */ + +#ifdef CONFIG_S3C_DEV_HSMMC2 +static inline void s5pv210_default_sdhci2(void) +{ + s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs; + s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio; + s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; +} +#else +static inline void s5pv210_default_sdhci2(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC2 */ + +#else +static inline void s5pv210_default_sdhci0(void) { } +static inline void s5pv210_default_sdhci1(void) { } +static inline void s5pv210_default_sdhci2(void) { } +#endif /* CONFIG_S5PC100_SETUP_SDHCI */ + + + + #endif /* __PLAT_S3C_SDHCI_H */ |