diff options
Diffstat (limited to 'arch/arm')
92 files changed, 4173 insertions, 819 deletions
diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts new file mode 100644 index 000000000000..dc09a735b04a --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -0,0 +1,64 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "D-Link DNS-320 NAS (Rev A1)"; + compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + + serial@12100 { + clock-frequency = <166666667>; + status = "okay"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x500000>; + }; + + partition@600000 { + label = "ramdisk"; + reg = <0x0600000 0x500000>; + }; + + partition@b00000 { + label = "image"; + reg = <0x0b00000 0x6600000>; + }; + + partition@7100000 { + label = "mini firmware"; + reg = <0x7100000 0xa00000>; + }; + + partition@7b00000 { + label = "config"; + reg = <0x7b00000 0x500000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts new file mode 100644 index 000000000000..c2a5562525d2 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -0,0 +1,59 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "D-Link DNS-325 NAS (Rev A1)"; + compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x500000>; + }; + + partition@600000 { + label = "ramdisk"; + reg = <0x0600000 0x500000>; + }; + + partition@b00000 { + label = "image"; + reg = <0x0b00000 0x6600000>; + }; + + partition@7100000 { + label = "mini firmware"; + reg = <0x7100000 0xa00000>; + }; + + partition@7b00000 { + label = "config"; + reg = <0x7b00000 0x500000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts new file mode 100644 index 000000000000..ada0f0c23085 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -0,0 +1,44 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; + compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x600000>; + }; + + partition@700000 { + label = "root"; + reg = <0x0700000 0xf900000>; + }; + + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts new file mode 100644 index 000000000000..1ba75d4adecc --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -0,0 +1,26 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Iomega Iconnect"; + compatible = "iom,iconnect-1.1", "iom,iconnect", "mrvl,kirkwood-88f6281", "mrvl,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk mtdparts=orion_nand:0xc0000@0x0(uboot),0x20000@0xa0000(env),0x300000@0x100000(zImage),0x300000@0x540000(initrd),0x1f400000@0x980000(boot)"; + linux,initrd-start = <0x4500040>; + linux,initrd-end = <0x4800000>; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 3474ef890945..926528b81baa 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -5,7 +5,7 @@ ocp@f1000000 { compatible = "simple-bus"; - ranges = <0 0xf1000000 0x1000000>; + ranges = <0 0xf1000000 0x4000000>; #address-cells = <1>; #size-cells = <1>; @@ -32,5 +32,18 @@ reg = <0x10300 0x20>; interrupts = <53>; }; + + nand@3000000 { + #address-cells = <1>; + #size-cells = <1>; + cle = <0>; + ale = <1>; + bank-width = <1>; + compatible = "mrvl,orion-nand"; + reg = <0x3000000 0x400>; + chip-delay = <25>; + /* set partition map and/or chip-delay in board dts */ + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts new file mode 100644 index 000000000000..a7505a95a3b7 --- /dev/null +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -0,0 +1,22 @@ +/* + * Device Tree Source for the armadillo 800 eva board + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "skeleton.dtsi" + +/ { + model = "armadillo 800 eva"; + compatible = "renesas,armadillo800eva"; + + memory { + device_type = "memory"; + reg = <0x40000000 0x20000000>; + }; +}; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts new file mode 100644 index 000000000000..bcb911951978 --- /dev/null +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -0,0 +1,22 @@ +/* + * Device Tree Source for the KZM-A9-GT board + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "skeleton.dtsi" + +/ { + model = "KZM-A9-GT"; + compatible = "renesas,kzm9g", "renesas,sh73a0"; + + memory { + device_type = "memory"; + reg = <0x41000000 0x1e800000>; + }; +}; diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig new file mode 100644 index 000000000000..ddc9fe6a78ac --- /dev/null +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -0,0 +1,142 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_R8A7740=y +CONFIG_MACH_ARMADILLO800EVA=y +# CONFIG_SH_TIMER_TMU is not set +# CONFIG_ARM_THUMB is not set +CONFIG_CPU_BPREDICT_DISABLE=y +# CONFIG_CACHE_L2X0 is not set +CONFIG_ARM_ERRATA_430973=y +CONFIG_ARM_ERRATA_458693=y +CONFIG_ARM_ERRATA_460075=y +CONFIG_ARM_ERRATA_720789=y +CONFIG_ARM_ERRATA_743622=y +CONFIG_ARM_ERRATA_751472=y +CONFIG_ARM_ERRATA_754322=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096" +CONFIG_CMDLINE_FORCE=y +CONFIG_KEXEC=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_SUSPEND is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_MD=y +CONFIG_BLK_DEV_DM=y +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +CONFIG_SH_ETH=y +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ST1232=y +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=8 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_SH_MOBILE=y +# CONFIG_HWMON is not set +CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_SH_MOBILE_LCDC=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_SOUND=y +CONFIG_SND=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_SH4_FSI=y +# CONFIG_HID_SUPPORT is not set +CONFIG_USB=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_RENESAS_USBHS=y +CONFIG_USB_GADGET=y +CONFIG_USB_RENESAS_USBHS_UDC=y +CONFIG_USB_ETH=m +CONFIG_MMC=y +CONFIG_MMC_SDHI=y +CONFIG_MMC_SH_MMCIF=y +CONFIG_UIO=y +CONFIG_UIO_PDRV_GENIRQ=y +# CONFIG_DNOTIFY is not set +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_V4_1=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_ARM_UNWIND is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_XZ_DEC=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 6b31cb60daab..09a02963cf58 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -92,6 +92,7 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=m +CONFIG_TOUCHSCREEN_MC13783=m # CONFIG_SERIO is not set # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=m @@ -107,7 +108,8 @@ CONFIG_SPI_SPIDEV=y CONFIG_W1=y CONFIG_W1_MASTER_MXC=y CONFIG_W1_SLAVE_THERM=y -# CONFIG_HWMON is not set +CONFIG_HWMON=m +CONFIG_SENSORS_MC13783_ADC=m CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y CONFIG_MFD_MC13XXX=y diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig new file mode 100644 index 000000000000..e3ebc20ed0a7 --- /dev/null +++ b/arch/arm/configs/kzm9g_defconfig @@ -0,0 +1,139 @@ +# CONFIG_ARM_PATCH_PHYS_VIRT is not set +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_SHMOBILE=y +CONFIG_KEYBOARD_GPIO_POLLED=y +CONFIG_ARCH_SH73A0=y +CONFIG_MACH_KZM9G=y +CONFIG_MEMORY_START=0x41000000 +CONFIG_MEMORY_SIZE=0x1f000000 +CONFIG_ARM_ERRATA_743622=y +CONFIG_ARM_ERRATA_754322=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_SMP=y +CONFIG_SCHED_MC=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_HIGHMEM=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200" +CONFIG_KEXEC=y +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_PM_RUNTIME=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +CONFIG_IRDA=y +CONFIG_SH_IRDA=y +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +CONFIG_SMSC911X=y +# CONFIG_WLAN is not set +CONFIG_INPUT_SPARSEKMAP=y +# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ST1232=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=9 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_SH_MOBILE=y +CONFIG_GPIO_PCF857X=y +# CONFIG_HWMON is not set +CONFIG_FB=y +CONFIG_FB_SH_MOBILE_LCDC=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +CONFIG_FB_SH_MOBILE_MERAM=y +CONFIG_SOUND=y +CONFIG_SND=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_SH4_FSI=y +# CONFIG_HID_SUPPORT is not set +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +CONFIG_USB_R8A66597_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +CONFIG_MMC_SDHI=y +CONFIG_MMC_SH_MMCIF=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_RTC_CLASS=y +CONFIG_DMADEVICES=y +CONFIG_SH_DMAE=y +CONFIG_ASYNC_TX_DMA=y +CONFIG_STAGING=y +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY_USER is not set +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_V4_1=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_FTRACE is not set +# CONFIG_ARM_UNWIND is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_DES=y +CONFIG_CRC16=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index d5f00d7eb075..9854ff4279e0 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -98,6 +98,7 @@ CONFIG_LIBERTAS_USB=m CONFIG_LIBERTAS_SDIO=m CONFIG_LIBERTAS_DEBUG=y CONFIG_USB_USBNET=y +CONFIG_USB_NET_SMSC95XX=y CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y CONFIG_USB_EPSON2888=y @@ -175,6 +176,7 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y CONFIG_USB_LIBUSUAL=y diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index b8df521fb68e..2808e471cdcc 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -200,6 +200,7 @@ config MACH_SMDKV310 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select SAMSUNG_DEV_BACKLIGHT + select EXYNOS_DEV_DRM select EXYNOS4_DEV_AHCI select SAMSUNG_DEV_KEYPAD select EXYNOS4_DEV_DMA @@ -255,6 +256,7 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_ONENAND select S5P_DEV_TV select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DRM select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 @@ -291,6 +293,7 @@ config MACH_NURI select S5P_DEV_USB_EHCI select S5P_SETUP_MIPIPHY select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DRM select EXYNOS4_SETUP_FIMC select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 @@ -325,6 +328,7 @@ config MACH_ORIGEN select S5P_DEV_USB_EHCI select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM + select EXYNOS_DEV_DRM select EXYNOS4_DEV_DMA select EXYNOS4_DEV_USB_OHCI select EXYNOS4_SETUP_FIMD0 @@ -345,6 +349,11 @@ config MACH_SMDK4212 select S3C_DEV_I2C7 select S3C_DEV_RTC select S3C_DEV_WDT + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_FIMC3 + select S5P_DEV_MFC select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_PWM diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 021dc68e89b5..5784b0abfe9d 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -25,6 +25,7 @@ #include <linux/mmc/host.h> #include <linux/fb.h> #include <linux/pwm_backlight.h> +#include <drm/exynos_drm.h> #include <video/platform_lcd.h> #include <media/m5mols.h> @@ -210,6 +211,29 @@ static struct platform_device nuri_gpio_keys = { }, }; +#ifdef CONFIG_DRM_EXYNOS +static struct exynos_drm_fimd_pdata drm_fimd_pdata = { + .panel = { + .timing = { + .xres = 1024, + .yres = 600, + .hsync_len = 40, + .left_margin = 79, + .right_margin = 200, + .vsync_len = 10, + .upper_margin = 10, + .lower_margin = 11, + .refresh = 60, + }, + }, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | + VIDCON0_CLKSEL_LCD, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .default_win = 3, + .bpp = 32, +}; + +#else /* Frame Buffer */ static struct s3c_fb_pd_win nuri_fb_win0 = { .win_mode = { @@ -236,6 +260,7 @@ static struct s3c_fb_platdata nuri_fb_pdata __initdata = { .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, }; +#endif static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power) { @@ -1299,6 +1324,9 @@ static struct platform_device *nuri_devices[] __initdata = { &cam_vdda_fixed_rdev, &cam_8m_12v_fixed_rdev, &exynos4_bus_devfreq, +#ifdef CONFIG_DRM_EXYNOS + &exynos_device_drm, +#endif }; static void __init nuri_map_io(void) @@ -1331,7 +1359,12 @@ static void __init nuri_machine_init(void) i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs)); s3c_i2c6_set_platdata(&nuri_i2c6_platdata); +#ifdef CONFIG_DRM_EXYNOS + s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; + exynos4_fimd0_gpio_setup_24bpp(); +#else s5p_fimd0_set_platdata(&nuri_fb_pdata); +#endif nuri_camera_init(); diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 827cb990c316..26124a38bcbd 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -45,6 +45,7 @@ #include <mach/ohci.h> #include <mach/map.h> +#include <drm/exynos_drm.h> #include "common.h" /* Following are default values for UCON, ULCON and UFCON UART registers */ @@ -581,6 +582,27 @@ static struct platform_device origen_lcd_hv070wsa = { .dev.platform_data = &origen_lcd_hv070wsa_data, }; +#ifdef CONFIG_DRM_EXYNOS +static struct exynos_drm_fimd_pdata drm_fimd_pdata = { + .panel = { + .timing = { + .left_margin = 64, + .right_margin = 16, + .upper_margin = 64, + .lower_margin = 16, + .hsync_len = 48, + .vsync_len = 3, + .xres = 1024, + .yres = 600, + }, + }, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | + VIDCON1_INV_VCLK, + .default_win = 0, + .bpp = 32, +}; +#else static struct s3c_fb_pd_win origen_fb_win0 = { .win_mode = { .left_margin = 64, @@ -594,6 +616,8 @@ static struct s3c_fb_pd_win origen_fb_win0 = { }, .max_bpp = 32, .default_bpp = 24, + .virtual_x = 1024, + .virtual_y = 2 * 600, }; static struct s3c_fb_platdata origen_lcd_pdata __initdata = { @@ -603,9 +627,10 @@ static struct s3c_fb_platdata origen_lcd_pdata __initdata = { VIDCON1_INV_VCLK, .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, }; +#endif /* Bluetooth rfkill gpio platform data */ -struct rfkill_gpio_platform_data origen_bt_pdata = { +static struct rfkill_gpio_platform_data origen_bt_pdata = { .reset_gpio = EXYNOS4_GPX2(2), .shutdown_gpio = -1, .type = RFKILL_TYPE_BLUETOOTH, @@ -642,6 +667,9 @@ static struct platform_device *origen_devices[] __initdata = { &s5p_device_mfc_l, &s5p_device_mfc_r, &s5p_device_mixer, +#ifdef CONFIG_DRM_EXYNOS + &exynos_device_drm, +#endif &exynos4_device_ohci, &origen_device_gpiokeys, &origen_lcd_hv070wsa, @@ -717,7 +745,12 @@ static void __init origen_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); +#ifdef CONFIG_DRM_EXYNOS + s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; + exynos4_fimd0_gpio_setup_24bpp(); +#else s5p_fimd0_set_platdata(&origen_lcd_pdata); +#endif platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices)); diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c index 4be083acf994..fe772d893cc9 100644 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ b/arch/arm/mach-exynos/mach-smdk4x12.c @@ -31,6 +31,7 @@ #include <plat/gpio-cfg.h> #include <plat/iic.h> #include <plat/keypad.h> +#include <plat/mfc.h> #include <plat/regs-serial.h> #include <plat/sdhci.h> @@ -242,6 +243,14 @@ static struct platform_device *smdk4x12_devices[] __initdata = { &s3c_device_i2c7, &s3c_device_rtc, &s3c_device_wdt, + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, + &s5p_device_fimc3, + &s5p_device_fimc_md, + &s5p_device_mfc, + &s5p_device_mfc_l, + &s5p_device_mfc_r, &samsung_device_keypad, }; @@ -254,6 +263,11 @@ static void __init smdk4x12_map_io(void) s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs)); } +static void __init smdk4x12_reserve(void) +{ + s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); +} + static void __init smdk4x12_machine_init(void) { s3c_i2c0_set_platdata(NULL); @@ -291,6 +305,7 @@ MACHINE_START(SMDK4212, "SMDK4212") .init_machine = smdk4x12_machine_init, .timer = &exynos4_timer, .restart = exynos4_restart, + .reserve = &smdk4x12_reserve, MACHINE_END MACHINE_START(SMDK4412, "SMDK4412") @@ -303,4 +318,5 @@ MACHINE_START(SMDK4412, "SMDK4412") .init_machine = smdk4x12_machine_init, .timer = &exynos4_timer, .restart = exynos4_restart, + .reserve = &smdk4x12_reserve, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index ea39f614f2db..5af96064ca51 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -44,6 +44,7 @@ #include <mach/map.h> #include <mach/ohci.h> +#include <drm/exynos_drm.h> #include "common.h" /* Following are default values for UCON, ULCON and UFCON UART registers */ @@ -156,6 +157,26 @@ static struct platform_device smdkv310_lcd_lte480wv = { .dev.platform_data = &smdkv310_lcd_lte480wv_data, }; +#ifdef CONFIG_DRM_EXYNOS +static struct exynos_drm_fimd_pdata drm_fimd_pdata = { + .panel = { + .timing = { + .left_margin = 13, + .right_margin = 8, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + }, + }, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .default_win = 0, + .bpp = 32, +}; +#else static struct s3c_fb_pd_win smdkv310_fb_win0 = { .win_mode = { .left_margin = 13, @@ -177,6 +198,7 @@ static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = { .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, }; +#endif static struct resource smdkv310_smsc911x_resources[] = { [0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(1), SZ_64K), @@ -262,6 +284,9 @@ static struct platform_device *smdkv310_devices[] __initdata = { &s5p_device_fimc_md, &s5p_device_g2d, &s5p_device_jpeg, +#ifdef CONFIG_DRM_EXYNOS + &exynos_device_drm, +#endif &exynos4_device_ac97, &exynos4_device_i2s0, &exynos4_device_ohci, @@ -353,7 +378,12 @@ static void __init smdkv310_machine_init(void) samsung_keypad_set_platdata(&smdkv310_keypad_data); samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data); +#ifdef CONFIG_DRM_EXYNOS + s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; + exynos4_fimd0_gpio_setup_24bpp(); +#else s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata); +#endif smdkv310_ehci_init(); smdkv310_ohci_init(); diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 57d524e03d63..27fab5389d7e 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -23,6 +23,7 @@ #include <linux/i2c-gpio.h> #include <linux/i2c/mcs.h> #include <linux/i2c/atmel_mxt_ts.h> +#include <drm/exynos_drm.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> @@ -811,6 +812,29 @@ static struct i2c_board_info i2c1_devs[] __initdata = { /* Gyro, To be updated */ }; +#ifdef CONFIG_DRM_EXYNOS +static struct exynos_drm_fimd_pdata drm_fimd_pdata = { + .panel = { + .timing = { + .left_margin = 16, + .right_margin = 16, + .upper_margin = 2, + .lower_margin = 28, + .hsync_len = 2, + .vsync_len = 1, + .xres = 480, + .yres = 800, + .refresh = 55, + }, + }, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | + VIDCON0_CLKSEL_LCD, + .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN + | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .default_win = 3, + .bpp = 32, +}; +#else /* Frame Buffer */ static struct s3c_fb_pd_win universal_fb_win0 = { .win_mode = { @@ -838,6 +862,7 @@ static struct s3c_fb_platdata universal_lcd_pdata __initdata = { | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, }; +#endif static struct regulator_consumer_supply cam_vt_dio_supply = REGULATOR_SUPPLY("vdd_core", "0-003c"); @@ -1047,6 +1072,9 @@ static struct platform_device *universal_devices[] __initdata = { &s5p_device_onenand, &s5p_device_fimd0, &s5p_device_jpeg, +#ifdef CONFIG_DRM_EXYNOS + &exynos_device_drm, +#endif &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, @@ -1094,7 +1122,12 @@ static void __init universal_machine_init(void) s5p_i2c_hdmiphy_set_platdata(NULL); i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); +#ifdef CONFIG_DRM_EXYNOS + s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; + exynos4_fimd0_gpio_setup_24bpp(); +#else s5p_fimd0_set_platdata(&universal_lcd_pdata); +#endif universal_touchkey_init(); i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs, diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index c8f83e9e5633..7d6322ce5223 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -163,6 +163,7 @@ config MACH_EUKREA_CPUIMX25SD select SOC_IMX25 select IMX_HAVE_PLATFORM_FLEXCAN select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMXDI_RTC select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C @@ -181,6 +182,7 @@ config MACH_EUKREA_MBIMXSD25_BASEBOARD bool "Eukrea MBIMXSD development board" select IMX_HAVE_PLATFORM_GPIO_KEYS select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_SPI_IMX select LEDS_GPIO_REGISTER help This adds board specific devices that can be found on Eukrea's @@ -608,6 +610,7 @@ config MACH_EUKREA_MBIMXSD35_BASEBOARD select IMX_HAVE_PLATFORM_GPIO_KEYS select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IPU_CORE + select IMX_HAVE_PLATFORM_SPI_IMX select LEDS_GPIO_REGISTER help This adds board specific devices that can be found on Eukrea's @@ -684,42 +687,13 @@ config MACH_MX51_3DS Include support for MX51PDK (3DS) platform. This includes specific configurations for the board and its peripherals. -config MACH_EUKREA_CPUIMX51 - bool "Support Eukrea CPUIMX51 module" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for Eukrea CPUIMX51 platform. This includes - specific configurations for the module and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX51 - default MACH_EUKREA_MBIMX51_BASEBOARD - -config MACH_EUKREA_MBIMX51_BASEBOARD - prompt "Eukrea MBIMX51 development board" - bool - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMX51 evaluation board. - -endchoice - config MACH_EUKREA_CPUIMX51SD bool "Support Eukrea CPUIMX51SD module" select SOC_IMX51 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX @@ -735,6 +709,7 @@ choice config MACH_EUKREA_MBIMXSD51_BASEBOARD prompt "Eukrea MBIMXSD development board" bool + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select LEDS_GPIO_REGISTER help diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index ab939c5046c3..4937c070a57e 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -83,10 +83,8 @@ obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += mach-cpuimx51.o -obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o -obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o +obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o diff --git a/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c deleted file mode 100644 index a6a3ab8f1b1c..000000000000 --- a/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * - * Copyright (C) 2010 Eric Bénard <eric@eukrea.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <linux/io.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/i2c/tsc2007.h> -#include <linux/leds.h> - -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx51.h> - -#include <asm/mach/arch.h> - -#include "devices-imx51.h" - -#define MBIMX51_TSC2007_GPIO IMX_GPIO_NR(3, 30) -#define MBIMX51_LED0 IMX_GPIO_NR(3, 5) -#define MBIMX51_LED1 IMX_GPIO_NR(3, 6) -#define MBIMX51_LED2 IMX_GPIO_NR(3, 7) -#define MBIMX51_LED3 IMX_GPIO_NR(3, 8) - -static const struct gpio_led mbimx51_leds[] __initconst = { - { - .name = "led0", - .default_trigger = "heartbeat", - .active_low = 1, - .gpio = MBIMX51_LED0, - }, - { - .name = "led1", - .default_trigger = "nand-disk", - .active_low = 1, - .gpio = MBIMX51_LED1, - }, - { - .name = "led2", - .default_trigger = "mmc0", - .active_low = 1, - .gpio = MBIMX51_LED2, - }, - { - .name = "led3", - .default_trigger = "default-on", - .active_low = 1, - .gpio = MBIMX51_LED3, - }, -}; - -static const struct gpio_led_platform_data mbimx51_leds_info __initconst = { - .leds = mbimx51_leds, - .num_leds = ARRAY_SIZE(mbimx51_leds), -}; - -static iomux_v3_cfg_t mbimx51_pads[] = { - /* UART2 */ - MX51_PAD_UART2_RXD__UART2_RXD, - MX51_PAD_UART2_TXD__UART2_TXD, - - /* UART3 */ - MX51_PAD_UART3_RXD__UART3_RXD, - MX51_PAD_UART3_TXD__UART3_TXD, - MX51_PAD_KEY_COL4__UART3_RTS, - MX51_PAD_KEY_COL5__UART3_CTS, - - /* TSC2007 IRQ */ - MX51_PAD_NANDF_D10__GPIO3_30, - - /* LEDS */ - MX51_PAD_DISPB2_SER_DIN__GPIO3_5, - MX51_PAD_DISPB2_SER_DIO__GPIO3_6, - MX51_PAD_DISPB2_SER_CLK__GPIO3_7, - MX51_PAD_DISPB2_SER_RS__GPIO3_8, - - /* KPP */ - MX51_PAD_KEY_ROW0__KEY_ROW0, - MX51_PAD_KEY_ROW1__KEY_ROW1, - MX51_PAD_KEY_ROW2__KEY_ROW2, - MX51_PAD_KEY_ROW3__KEY_ROW3, - MX51_PAD_KEY_COL0__KEY_COL0, - MX51_PAD_KEY_COL1__KEY_COL1, - MX51_PAD_KEY_COL2__KEY_COL2, - MX51_PAD_KEY_COL3__KEY_COL3, - - /* SD 1 */ - MX51_PAD_SD1_CMD__SD1_CMD, - MX51_PAD_SD1_CLK__SD1_CLK, - MX51_PAD_SD1_DATA0__SD1_DATA0, - MX51_PAD_SD1_DATA1__SD1_DATA1, - MX51_PAD_SD1_DATA2__SD1_DATA2, - MX51_PAD_SD1_DATA3__SD1_DATA3, - - /* SD 2 */ - MX51_PAD_SD2_CMD__SD2_CMD, - MX51_PAD_SD2_CLK__SD2_CLK, - MX51_PAD_SD2_DATA0__SD2_DATA0, - MX51_PAD_SD2_DATA1__SD2_DATA1, - MX51_PAD_SD2_DATA2__SD2_DATA2, - MX51_PAD_SD2_DATA3__SD2_DATA3, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static int mbimx51_keymap[] = { - KEY(0, 0, KEY_1), - KEY(0, 1, KEY_2), - KEY(0, 2, KEY_3), - KEY(0, 3, KEY_UP), - - KEY(1, 0, KEY_4), - KEY(1, 1, KEY_5), - KEY(1, 2, KEY_6), - KEY(1, 3, KEY_LEFT), - - KEY(2, 0, KEY_7), - KEY(2, 1, KEY_8), - KEY(2, 2, KEY_9), - KEY(2, 3, KEY_RIGHT), - - KEY(3, 0, KEY_0), - KEY(3, 1, KEY_DOWN), - KEY(3, 2, KEY_ESC), - KEY(3, 3, KEY_ENTER), -}; - -static const struct matrix_keymap_data mbimx51_map_data __initconst = { - .keymap = mbimx51_keymap, - .keymap_size = ARRAY_SIZE(mbimx51_keymap), -}; - -static int tsc2007_get_pendown_state(void) -{ - return !gpio_get_value(MBIMX51_TSC2007_GPIO); -} - -struct tsc2007_platform_data tsc2007_data = { - .model = 2007, - .x_plate_ohms = 180, - .get_pendown_state = tsc2007_get_pendown_state, -}; - -static struct i2c_board_info mbimx51_i2c_devices[] = { - { - I2C_BOARD_INFO("tsc2007", 0x49), - .irq = IMX_GPIO_TO_IRQ(MBIMX51_TSC2007_GPIO), - .platform_data = &tsc2007_data, - }, { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, -}; - -/* - * baseboard initialization. - */ -void __init eukrea_mbimx51_baseboard_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mbimx51_pads, - ARRAY_SIZE(mbimx51_pads)); - - imx51_add_imx_uart(1, NULL); - imx51_add_imx_uart(2, &uart_pdata); - - gpio_request(MBIMX51_LED0, "LED0"); - gpio_direction_output(MBIMX51_LED0, 1); - gpio_free(MBIMX51_LED0); - gpio_request(MBIMX51_LED1, "LED1"); - gpio_direction_output(MBIMX51_LED1, 1); - gpio_free(MBIMX51_LED1); - gpio_request(MBIMX51_LED2, "LED2"); - gpio_direction_output(MBIMX51_LED2, 1); - gpio_free(MBIMX51_LED2); - gpio_request(MBIMX51_LED3, "LED3"); - gpio_direction_output(MBIMX51_LED3, 1); - gpio_free(MBIMX51_LED3); - - gpio_led_register_device(-1, &mbimx51_leds_info); - - imx51_add_imx_keypad(&mbimx51_map_data); - - gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq"); - gpio_direction_input(MBIMX51_TSC2007_GPIO); - irq_set_irq_type(gpio_to_irq(MBIMX51_TSC2007_GPIO), - IRQF_TRIGGER_FALLING); - i2c_register_board_info(1, mbimx51_i2c_devices, - ARRAY_SIZE(mbimx51_i2c_devices)); - - imx51_add_sdhci_esdhc_imx(0, NULL); - imx51_add_sdhci_esdhc_imx(1, NULL); -} diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c index 2cf603e11c4f..dfd2da87c2df 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c @@ -23,6 +23,7 @@ #include <linux/leds.h> #include <linux/platform_device.h> #include <linux/input.h> +#include <linux/spi/spi.h> #include <video/platform_lcd.h> #include <mach/hardware.h> @@ -87,12 +88,22 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = { /* CAN */ MX25_PAD_GPIO_D__CAN2_RX, MX25_PAD_GPIO_C__CAN2_TX, + /* SPI1 */ + MX25_PAD_CSPI1_MOSI__CSPI1_MOSI, + MX25_PAD_CSPI1_MISO__CSPI1_MISO, + MX25_PAD_CSPI1_SS0__GPIO_1_16, + MX25_PAD_CSPI1_SS1__GPIO_1_17, + MX25_PAD_CSPI1_SCLK__CSPI1_SCLK, + MX25_PAD_CSPI1_RDY__GPIO_2_22, }; -#define GPIO_LED1 83 -#define GPIO_SWITCH1 82 -#define GPIO_SD1CD 52 -#define GPIO_LCDPWR 26 +#define GPIO_LED1 IMX_GPIO_NR(3, 19) +#define GPIO_SWITCH1 IMX_GPIO_NR(3, 18) +#define GPIO_SD1CD IMX_GPIO_NR(2, 20) +#define GPIO_LCDPWR IMX_GPIO_NR(1, 26) +#define GPIO_SPI1_SS0 IMX_GPIO_NR(1, 16) +#define GPIO_SPI1_SS1 IMX_GPIO_NR(1, 17) +#define GPIO_SPI1_IRQ IMX_GPIO_NR(2, 22) static struct imx_fb_videomode eukrea_mximxsd_modes[] = { { @@ -228,6 +239,30 @@ static struct esdhc_platform_data sd1_pdata = { .wp_type = ESDHC_WP_NONE, }; +static struct spi_board_info eukrea_mbimxsd25_spi_board_info[] __initdata = { + { + .modalias = "spidev", + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + }, + { + .modalias = "spidev", + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 1, + .mode = SPI_MODE_0, + }, +}; + +static int eukrea_mbimxsd25_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1}; + +static const struct spi_imx_master eukrea_mbimxsd25_spi0_data __initconst = { + .chipselect = eukrea_mbimxsd25_spi_cs, + .num_chipselect = ARRAY_SIZE(eukrea_mbimxsd25_spi_cs), +}; + /* * system init for baseboard usage. Will be called by cpuimx25 init. * @@ -257,11 +292,17 @@ void __init eukrea_mbimxsd25_baseboard_init(void) gpio_request(GPIO_LCDPWR, "LCDPWR"); gpio_direction_output(GPIO_LCDPWR, 1); - gpio_free(GPIO_SWITCH1); i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices, ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); + gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ"); + gpio_direction_input(GPIO_SPI1_IRQ); + gpio_free(GPIO_SPI1_IRQ); + imx25_add_spi_imx0(&eukrea_mbimxsd25_spi0_data); + spi_register_board_info(eukrea_mbimxsd25_spi_board_info, + ARRAY_SIZE(eukrea_mbimxsd25_spi_board_info)); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); gpio_led_register_device(-1, &eukrea_mbimxsd_led_info); imx_add_gpio_keys(&eukrea_mbimxsd_button_data); diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c index fd8bf8a425a7..557f6c486053 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c @@ -27,6 +27,7 @@ #include <linux/leds.h> #include <linux/platform_device.h> #include <linux/input.h> +#include <linux/spi/spi.h> #include <video/platform_lcd.h> #include <linux/i2c.h> @@ -158,12 +159,22 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = { MX35_PAD_SD1_DATA3__ESDHC1_DAT3, /* SD1 CD */ MX35_PAD_LD18__GPIO3_24, + /* SPI */ + MX35_PAD_CSPI1_MOSI__CSPI1_MOSI, + MX35_PAD_CSPI1_MISO__CSPI1_MISO, + MX35_PAD_CSPI1_SS0__GPIO1_18, + MX35_PAD_CSPI1_SS1__GPIO1_19, + MX35_PAD_CSPI1_SCLK__CSPI1_SCLK, + MX35_PAD_CSPI1_SPI_RDY__GPIO3_5, }; #define GPIO_LED1 IMX_GPIO_NR(3, 29) #define GPIO_SWITCH1 IMX_GPIO_NR(3, 25) #define GPIO_LCDPWR IMX_GPIO_NR(1, 4) #define GPIO_SD1CD IMX_GPIO_NR(3, 24) +#define GPIO_SPI1_SS0 IMX_GPIO_NR(1, 18) +#define GPIO_SPI1_SS1 IMX_GPIO_NR(1, 19) +#define GPIO_SPI1_IRQ IMX_GPIO_NR(3, 5) static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) @@ -239,6 +250,30 @@ static struct esdhc_platform_data sd1_pdata = { .wp_type = ESDHC_WP_NONE, }; +static struct spi_board_info eukrea_mbimxsd35_spi_board_info[] __initdata = { + { + .modalias = "spidev", + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + }, + { + .modalias = "spidev", + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 1, + .mode = SPI_MODE_0, + }, +}; + +static int eukrea_mbimxsd35_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1}; + +static const struct spi_imx_master eukrea_mbimxsd35_spi0_data __initconst = { + .chipselect = eukrea_mbimxsd35_spi_cs, + .num_chipselect = ARRAY_SIZE(eukrea_mbimxsd35_spi_cs), +}; + /* * system init for baseboard usage. Will be called by cpuimx35 init. * @@ -274,6 +309,13 @@ void __init eukrea_mbimxsd35_baseboard_init(void) i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices, ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); + gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ"); + gpio_direction_input(GPIO_SPI1_IRQ); + gpio_free(GPIO_SPI1_IRQ); + imx35_add_spi_imx0(&eukrea_mbimxsd35_spi0_data); + spi_register_board_info(eukrea_mbimxsd35_spi_board_info, + ARRAY_SIZE(eukrea_mbimxsd35_spi_board_info)); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); gpio_led_register_device(-1, &eukrea_mbimxsd_led_info); imx_add_gpio_keys(&eukrea_mbimxsd_button_data); diff --git a/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c index aaa592fdb9ce..96a24b73dc23 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c @@ -28,6 +28,8 @@ #include <linux/platform_device.h> #include <linux/input.h> #include <linux/i2c.h> +#include <video/platform_lcd.h> +#include <linux/backlight.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -40,7 +42,7 @@ #include "devices-imx51.h" -static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = { +static iomux_v3_cfg_t eukrea_mbimxsd51_pads[] = { /* LED */ MX51_PAD_NANDF_D10__GPIO3_30, /* SWITCH */ @@ -66,12 +68,64 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = { NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP | PAD_CTL_PKE | PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), + /* SSI */ + MX51_PAD_AUD3_BB_TXD__AUD3_TXD, + MX51_PAD_AUD3_BB_RXD__AUD3_RXD, + MX51_PAD_AUD3_BB_CK__AUD3_TXC, + MX51_PAD_AUD3_BB_FS__AUD3_TXFS, + /* LCD Backlight */ + MX51_PAD_DI1_D1_CS__GPIO3_4, + /* LCD RST */ + MX51_PAD_CSI1_D9__GPIO3_13, }; #define GPIO_LED1 IMX_GPIO_NR(3, 30) #define GPIO_SWITCH1 IMX_GPIO_NR(3, 31) +#define GPIO_LCDRST IMX_GPIO_NR(3, 13) +#define GPIO_LCDBL IMX_GPIO_NR(3, 4) -static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = { +static void eukrea_mbimxsd51_lcd_power_set(struct plat_lcd_data *pd, + unsigned int power) +{ + if (power) + gpio_direction_output(GPIO_LCDRST, 1); + else + gpio_direction_output(GPIO_LCDRST, 0); +} + +static struct plat_lcd_data eukrea_mbimxsd51_lcd_power_data = { + .set_power = eukrea_mbimxsd51_lcd_power_set, +}; + +static struct platform_device eukrea_mbimxsd51_lcd_powerdev = { + .name = "platform-lcd", + .dev.platform_data = &eukrea_mbimxsd51_lcd_power_data, +}; + +static void eukrea_mbimxsd51_bl_set_intensity(int intensity) +{ + if (intensity) + gpio_direction_output(GPIO_LCDBL, 1); + else + gpio_direction_output(GPIO_LCDBL, 0); +} + +static struct generic_bl_info eukrea_mbimxsd51_bl_info = { + .name = "eukrea_mbimxsd51-bl", + .max_intensity = 0xff, + .default_intensity = 0xff, + .set_bl_intensity = eukrea_mbimxsd51_bl_set_intensity, +}; + +static struct platform_device eukrea_mbimxsd51_bl_dev = { + .name = "generic-bl", + .id = 1, + .dev = { + .platform_data = &eukrea_mbimxsd51_bl_info, + }, +}; + +static const struct gpio_led eukrea_mbimxsd51_leds[] __initconst = { { .name = "led1", .default_trigger = "heartbeat", @@ -81,12 +135,12 @@ static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = { }; static const struct gpio_led_platform_data - eukrea_mbimxsd_led_info __initconst = { - .leds = eukrea_mbimxsd_leds, - .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds), + eukrea_mbimxsd51_led_info __initconst = { + .leds = eukrea_mbimxsd51_leds, + .num_leds = ARRAY_SIZE(eukrea_mbimxsd51_leds), }; -static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = { +static struct gpio_keys_button eukrea_mbimxsd51_gpio_buttons[] = { { .gpio = GPIO_SWITCH1, .code = BTN_0, @@ -97,21 +151,39 @@ static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = { }; static const struct gpio_keys_platform_data - eukrea_mbimxsd_button_data __initconst = { - .buttons = eukrea_mbimxsd_gpio_buttons, - .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons), + eukrea_mbimxsd51_button_data __initconst = { + .buttons = eukrea_mbimxsd51_gpio_buttons, + .nbuttons = ARRAY_SIZE(eukrea_mbimxsd51_gpio_buttons), }; static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = { +static struct i2c_board_info eukrea_mbimxsd51_i2c_devices[] = { { I2C_BOARD_INFO("tlv320aic23", 0x1a), }, }; +static const +struct imx_ssi_platform_data eukrea_mbimxsd51_ssi_pdata __initconst = { + .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, +}; + +static int screen_type; + +static int __init eukrea_mbimxsd51_screen_type(char *options) +{ + if (!strcmp(options, "dvi")) + screen_type = 1; + else if (!strcmp(options, "tft")) + screen_type = 0; + + return 0; +} +__setup("screen_type=", eukrea_mbimxsd51_screen_type); + /* * system init for baseboard usage. Will be called by cpuimx51sd init. * @@ -120,8 +192,8 @@ static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = { */ void __init eukrea_mbimxsd51_baseboard_init(void) { - if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads, - ARRAY_SIZE(eukrea_mbimxsd_pads))) + if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd51_pads, + ARRAY_SIZE(eukrea_mbimxsd51_pads))) printk(KERN_ERR "error setting mbimxsd pads !\n"); imx51_add_imx_uart(1, NULL); @@ -129,6 +201,8 @@ void __init eukrea_mbimxsd51_baseboard_init(void) imx51_add_sdhci_esdhc_imx(0, NULL); + imx51_add_imx_ssi(0, &eukrea_mbimxsd51_ssi_pdata); + gpio_request(GPIO_LED1, "LED1"); gpio_direction_output(GPIO_LED1, 1); gpio_free(GPIO_LED1); @@ -137,9 +211,21 @@ void __init eukrea_mbimxsd51_baseboard_init(void) gpio_direction_input(GPIO_SWITCH1); gpio_free(GPIO_SWITCH1); - i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices, - ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); - - gpio_led_register_device(-1, &eukrea_mbimxsd_led_info); - imx_add_gpio_keys(&eukrea_mbimxsd_button_data); + gpio_request(GPIO_LCDRST, "LCDRST"); + gpio_direction_output(GPIO_LCDRST, 0); + gpio_request(GPIO_LCDBL, "LCDBL"); + gpio_direction_output(GPIO_LCDBL, 0); + if (!screen_type) { + platform_device_register(&eukrea_mbimxsd51_bl_dev); + platform_device_register(&eukrea_mbimxsd51_lcd_powerdev); + } else { + gpio_free(GPIO_LCDRST); + gpio_free(GPIO_LCDBL); + } + + i2c_register_board_info(0, eukrea_mbimxsd51_i2c_devices, + ARRAY_SIZE(eukrea_mbimxsd51_i2c_devices)); + + gpio_led_register_device(-1, &eukrea_mbimxsd51_led_info); + imx_add_gpio_keys(&eukrea_mbimxsd51_button_data); } diff --git a/arch/arm/mach-imx/mach-cpuimx51.c b/arch/arm/mach-imx/mach-cpuimx51.c deleted file mode 100644 index 944025da8333..000000000000 --- a/arch/arm/mach-imx/mach-cpuimx51.c +++ /dev/null @@ -1,301 +0,0 @@ -/* - * - * Copyright (C) 2010 Eric Bénard <eric@eukrea.com> - * - * based on board-mx51_babbage.c which is - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/interrupt.h> - -#include <mach/eukrea-baseboards.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx51.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "devices-imx51.h" - -#define CPUIMX51_USBH1_STP IMX_GPIO_NR(1, 27) -#define CPUIMX51_QUARTA_GPIO IMX_GPIO_NR(3, 28) -#define CPUIMX51_QUARTB_GPIO IMX_GPIO_NR(3, 25) -#define CPUIMX51_QUARTC_GPIO IMX_GPIO_NR(3, 26) -#define CPUIMX51_QUARTD_GPIO IMX_GPIO_NR(3, 27) -#define CPUIMX51_QUART_XTAL 14745600 -#define CPUIMX51_QUART_REGSHIFT 17 - -/* USB_CTRL_1 */ -#define MX51_USB_CTRL_1_OFFSET 0x10 -#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) - -#define MX51_USB_PLLDIV_12_MHZ 0x00 -#define MX51_USB_PLL_DIV_19_2_MHZ 0x01 -#define MX51_USB_PLL_DIV_24_MHZ 0x02 - -static struct plat_serial8250_port serial_platform_data[] = { - { - .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000), - .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTA_GPIO), - .irqflags = IRQF_TRIGGER_HIGH, - .uartclk = CPUIMX51_QUART_XTAL, - .regshift = CPUIMX51_QUART_REGSHIFT, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000), - .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTB_GPIO), - .irqflags = IRQF_TRIGGER_HIGH, - .uartclk = CPUIMX51_QUART_XTAL, - .regshift = CPUIMX51_QUART_REGSHIFT, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000), - .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTC_GPIO), - .irqflags = IRQF_TRIGGER_HIGH, - .uartclk = CPUIMX51_QUART_XTAL, - .regshift = CPUIMX51_QUART_REGSHIFT, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000), - .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTD_GPIO), - .irqflags = IRQF_TRIGGER_HIGH, - .uartclk = CPUIMX51_QUART_XTAL, - .regshift = CPUIMX51_QUART_REGSHIFT, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - } -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = 0, - .dev = { - .platform_data = serial_platform_data, - }, -}; - -static struct platform_device *devices[] __initdata = { - &serial_device, -}; - -static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = { - /* UART1 */ - MX51_PAD_UART1_RXD__UART1_RXD, - MX51_PAD_UART1_TXD__UART1_TXD, - MX51_PAD_UART1_RTS__UART1_RTS, - MX51_PAD_UART1_CTS__UART1_CTS, - - /* I2C2 */ - MX51_PAD_GPIO1_2__I2C2_SCL, - MX51_PAD_GPIO1_3__I2C2_SDA, - MX51_PAD_NANDF_D10__GPIO3_30, - - /* QUART IRQ */ - MX51_PAD_NANDF_D15__GPIO3_25, - MX51_PAD_NANDF_D14__GPIO3_26, - MX51_PAD_NANDF_D13__GPIO3_27, - MX51_PAD_NANDF_D12__GPIO3_28, - - /* USB HOST1 */ - MX51_PAD_USBH1_CLK__USBH1_CLK, - MX51_PAD_USBH1_DIR__USBH1_DIR, - MX51_PAD_USBH1_NXT__USBH1_NXT, - MX51_PAD_USBH1_DATA0__USBH1_DATA0, - MX51_PAD_USBH1_DATA1__USBH1_DATA1, - MX51_PAD_USBH1_DATA2__USBH1_DATA2, - MX51_PAD_USBH1_DATA3__USBH1_DATA3, - MX51_PAD_USBH1_DATA4__USBH1_DATA4, - MX51_PAD_USBH1_DATA5__USBH1_DATA5, - MX51_PAD_USBH1_DATA6__USBH1_DATA6, - MX51_PAD_USBH1_DATA7__USBH1_DATA7, - MX51_PAD_USBH1_STP__USBH1_STP, -}; - -static const struct mxc_nand_platform_data - eukrea_cpuimx51_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const -struct imxi2c_platform_data eukrea_cpuimx51_i2c_data __initconst = { - .bitrate = 100000, -}; - -static struct i2c_board_info eukrea_cpuimx51_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, -}; - -/* This function is board specific as the bit mask for the plldiv will also -be different for other Freescale SoCs, thus a common bitmask is not -possible and cannot get place in /plat-mxc/ehci.c.*/ -static int initialize_otg_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; - - /* Set the PHY clock to 19.2MHz */ - v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; - v |= MX51_USB_PLL_DIV_19_2_MHZ; - __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - iounmap(usb_base); - - mdelay(10); - - return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); -} - -static int initialize_usbh1_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; - - /* The clock for the USBH1 ULPI port will come externally from the PHY. */ - v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET); - __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET); - iounmap(usb_base); - - mdelay(10); - - return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED | - MXC_EHCI_ITC_NO_THRESHOLD); -} - -static const struct mxc_usbh_platform_data dr_utmi_config __initconst = { - .init = initialize_otg_port, - .portsc = MXC_EHCI_UTMI_16BIT, -}; - -static const struct fsl_usb2_platform_data usb_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI_WIDE, -}; - -static const struct mxc_usbh_platform_data usbh1_config __initconst = { - .init = initialize_usbh1_port, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static int otg_mode_host; - -static int __init eukrea_cpuimx51_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = 1; - else if (!strcmp(options, "device")) - otg_mode_host = 0; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 0; -} -__setup("otg_mode=", eukrea_cpuimx51_otg_mode); - -/* - * Board specific initialization. - */ -static void __init eukrea_cpuimx51_init(void) -{ - imx51_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads, - ARRAY_SIZE(eukrea_cpuimx51_pads)); - - imx51_add_imx_uart(0, &uart_pdata); - imx51_add_mxc_nand(&eukrea_cpuimx51_nand_board_info); - - gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq"); - gpio_direction_input(CPUIMX51_QUARTA_GPIO); - gpio_free(CPUIMX51_QUARTA_GPIO); - gpio_request(CPUIMX51_QUARTB_GPIO, "quartb_irq"); - gpio_direction_input(CPUIMX51_QUARTB_GPIO); - gpio_free(CPUIMX51_QUARTB_GPIO); - gpio_request(CPUIMX51_QUARTC_GPIO, "quartc_irq"); - gpio_direction_input(CPUIMX51_QUARTC_GPIO); - gpio_free(CPUIMX51_QUARTC_GPIO); - gpio_request(CPUIMX51_QUARTD_GPIO, "quartd_irq"); - gpio_direction_input(CPUIMX51_QUARTD_GPIO); - gpio_free(CPUIMX51_QUARTD_GPIO); - - imx51_add_fec(NULL); - platform_add_devices(devices, ARRAY_SIZE(devices)); - - imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data); - i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices, - ARRAY_SIZE(eukrea_cpuimx51_i2c_devices)); - - if (otg_mode_host) - imx51_add_mxc_ehci_otg(&dr_utmi_config); - else { - initialize_otg_port(NULL); - imx51_add_fsl_usb2_udc(&usb_pdata); - } - imx51_add_mxc_ehci_hs(1, &usbh1_config); - -#ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD - eukrea_mbimx51_baseboard_init(); -#endif -} - -static void __init eukrea_cpuimx51_timer_init(void) -{ - mx51_clocks_init(32768, 24000000, 22579200, 0); -} - -static struct sys_timer mxc_timer = { - .init = eukrea_cpuimx51_timer_init, -}; - -MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module") - /* Maintainer: Eric Bénard <eric@eukrea.com> */ - .atag_offset = 0x100, - .map_io = mx51_map_io, - .init_early = imx51_init_early, - .init_irq = mx51_init_irq, - .handle_irq = imx51_handle_irq, - .timer = &mxc_timer, - .init_machine = eukrea_cpuimx51_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index 9fbe923c8b08..ce341a6874fc 100644 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c @@ -41,11 +41,13 @@ #define USBH1_RST IMX_GPIO_NR(2, 28) #define ETH_RST IMX_GPIO_NR(2, 31) -#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 12) +#define TSC2007_IRQGPIO_REV2 IMX_GPIO_NR(3, 12) +#define TSC2007_IRQGPIO_REV3 IMX_GPIO_NR(4, 0) #define CAN_IRQGPIO IMX_GPIO_NR(1, 1) #define CAN_RST IMX_GPIO_NR(4, 15) #define CAN_NCS IMX_GPIO_NR(4, 24) -#define CAN_RXOBF IMX_GPIO_NR(1, 4) +#define CAN_RXOBF_REV2 IMX_GPIO_NR(1, 4) +#define CAN_RXOBF_REV3 IMX_GPIO_NR(3, 12) #define CAN_RX1BF IMX_GPIO_NR(1, 6) #define CAN_TXORTS IMX_GPIO_NR(1, 7) #define CAN_TX1RTS IMX_GPIO_NR(1, 8) @@ -90,6 +92,10 @@ static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = { MX51_PAD_I2C1_CLK__GPIO4_16, MX51_PAD_I2C1_DAT__GPIO4_17, + /* I2C1 */ + MX51_PAD_SD2_CMD__I2C1_SCL, + MX51_PAD_SD2_CLK__I2C1_SDA, + /* CAN */ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, MX51_PAD_CSPI1_MISO__ECSPI1_MISO, @@ -108,15 +114,27 @@ static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = { NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP | PAD_CTL_PKE | PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), + NEW_PAD_CTRL(MX51_PAD_NANDF_D8__GPIO4_0, PAD_CTL_PUS_22K_UP | + PAD_CTL_PKE | PAD_CTL_SRE_FAST | + PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), }; static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; +static int tsc2007_get_pendown_state(void) +{ + if (mx51_revision() < IMX_CHIP_REVISION_3_0) + return !gpio_get_value(TSC2007_IRQGPIO_REV2); + else + return !gpio_get_value(TSC2007_IRQGPIO_REV3); +} + static struct tsc2007_platform_data tsc2007_info = { .model = 2007, .x_plate_ohms = 180, + .get_pendown_state = tsc2007_get_pendown_state, }; static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = { @@ -126,7 +144,6 @@ static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = { I2C_BOARD_INFO("tsc2007", 0x49), .type = "tsc2007", .platform_data = &tsc2007_info, - .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO), }, }; @@ -255,10 +272,14 @@ static const struct spi_imx_master cpuimx51sd_ecspi1_pdata __initconst = { .num_chipselect = ARRAY_SIZE(cpuimx51sd_spi1_cs), }; -static struct platform_device *platform_devices[] __initdata = { +static struct platform_device *rev2_platform_devices[] __initdata = { &hsi2c_gpio_device, }; +static const struct imxi2c_platform_data cpuimx51sd_i2c_data __initconst = { + .bitrate = 100000, +}; + static void __init eukrea_cpuimx51sd_init(void) { imx51_soc_init(); @@ -272,6 +293,7 @@ static void __init eukrea_cpuimx51sd_init(void) imx51_add_imx_uart(0, &uart_pdata); imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info); + imx51_add_imx2_wdt(0, NULL); gpio_request(ETH_RST, "eth_rst"); gpio_set_value(ETH_RST, 1); @@ -291,13 +313,25 @@ static void __init eukrea_cpuimx51sd_init(void) spi_register_board_info(cpuimx51sd_spi_device, ARRAY_SIZE(cpuimx51sd_spi_device)); - gpio_request(TSC2007_IRQGPIO, "tsc2007_irq"); - gpio_direction_input(TSC2007_IRQGPIO); - gpio_free(TSC2007_IRQGPIO); + if (mx51_revision() < IMX_CHIP_REVISION_3_0) { + eukrea_cpuimx51sd_i2c_devices[1].irq = + gpio_to_irq(TSC2007_IRQGPIO_REV2), + platform_add_devices(rev2_platform_devices, + ARRAY_SIZE(rev2_platform_devices)); + gpio_request(TSC2007_IRQGPIO_REV2, "tsc2007_irq"); + gpio_direction_input(TSC2007_IRQGPIO_REV2); + gpio_free(TSC2007_IRQGPIO_REV2); + } else { + eukrea_cpuimx51sd_i2c_devices[1].irq = + gpio_to_irq(TSC2007_IRQGPIO_REV3), + imx51_add_imx_i2c(0, &cpuimx51sd_i2c_data); + gpio_request(TSC2007_IRQGPIO_REV3, "tsc2007_irq"); + gpio_direction_input(TSC2007_IRQGPIO_REV3); + gpio_free(TSC2007_IRQGPIO_REV3); + } i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices, ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices)); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); if (otg_mode_host) imx51_add_mxc_ehci_otg(&dr_utmi_config); diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index 76a97a598b9e..d1e04e676e33 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -106,6 +106,7 @@ static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_UTMI, + .workaround = FLS_USB2_WORKAROUND_ENGCM09152, }; static int otg_mode_host; @@ -135,6 +136,7 @@ static void __init eukrea_cpuimx25_init(void) imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info); imx25_add_imxdi_rtc(NULL); imx25_add_fec(&mx25_fec_pdata); + imx25_add_imx2_wdt(NULL); i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices, ARRAY_SIZE(eukrea_cpuimx25_i2c_devices)); diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index f7b074f496f0..748ba2e311b5 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -38,6 +38,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include <asm/system.h> #include <mach/common.h> #include <mach/iomux-mx27.h> @@ -48,6 +49,14 @@ #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17) #define SDHC1_IRQ IRQ_GPIOB(25) +#define MOTHERBOARD_BIT2 (GPIO_PORTD + 31) +#define MOTHERBOARD_BIT1 (GPIO_PORTD + 30) +#define MOTHERBOARD_BIT0 (GPIO_PORTD + 29) + +#define EXPBOARD_BIT2 (GPIO_PORTD + 25) +#define EXPBOARD_BIT1 (GPIO_PORTD + 27) +#define EXPBOARD_BIT0 (GPIO_PORTD + 28) + static const int visstrim_m10_pins[] __initconst = { /* UART1 (console) */ PE12_PF_UART1_TXD, @@ -119,6 +128,23 @@ static const int visstrim_m10_pins[] __initconst = { PB19_PF_CSI_D7, PB20_PF_CSI_VSYNC, PB21_PF_CSI_HSYNC, + /* mother board version */ + MOTHERBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, + MOTHERBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, + MOTHERBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, + /* expansion board version */ + EXPBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, + EXPBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, + EXPBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, +}; + +static struct gpio visstrim_m10_version_gpios[] = { + { EXPBOARD_BIT0, GPIOF_IN, "exp-version-0" }, + { EXPBOARD_BIT1, GPIOF_IN, "exp-version-1" }, + { EXPBOARD_BIT2, GPIOF_IN, "exp-version-2" }, + { MOTHERBOARD_BIT0, GPIOF_IN, "mother-version-0" }, + { MOTHERBOARD_BIT1, GPIOF_IN, "mother-version-1" }, + { MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" }, }; /* Camera */ @@ -369,11 +395,40 @@ static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = { .flags = IMX_SSI_DMA | IMX_SSI_SYN, }; +static void __init visstrim_m10_revision(void) +{ + int exp_version = 0; + int mo_version = 0; + int ret; + + ret = gpio_request_array(visstrim_m10_version_gpios, + ARRAY_SIZE(visstrim_m10_version_gpios)); + if (ret) { + pr_err("Failed to request version gpios"); + return; + } + + /* Get expansion board version (negative logic) */ + exp_version |= !gpio_get_value(EXPBOARD_BIT2) << 2; + exp_version |= !gpio_get_value(EXPBOARD_BIT1) << 1; + exp_version |= !gpio_get_value(EXPBOARD_BIT0); + + /* Get mother board version (negative logic) */ + mo_version |= !gpio_get_value(MOTHERBOARD_BIT2) << 2; + mo_version |= !gpio_get_value(MOTHERBOARD_BIT1) << 1; + mo_version |= !gpio_get_value(MOTHERBOARD_BIT0); + + system_rev = 0x27000; + system_rev |= (mo_version << 4); + system_rev |= exp_version; +} + static void __init visstrim_m10_board_init(void) { int ret; imx27_soc_init(); + visstrim_m10_revision(); ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins, ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10"); diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index c433187988a2..86284bba46d3 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -34,6 +34,8 @@ #include <linux/usb/otg.h> #include <linux/mtd/physmap.h> +#include <linux/mfd/mc13892.h> +#include <linux/regulator/machine.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -253,6 +255,8 @@ static iomux_v3_cfg_t mx35pdk_pads[] = { MX35_PAD_CSI_MCLK__IPU_CSI_MCLK, MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK, MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC, + /*PMIC IRQ*/ + MX35_PAD_GPIO2_0__GPIO2_0, }; /* @@ -317,6 +321,193 @@ static struct platform_device mx35_3ds_ov2640 = { }, }; +static struct regulator_consumer_supply sw1_consumers[] = { + { + .supply = "cpu_vcc", + } +}; + +static struct regulator_consumer_supply vcam_consumers[] = { + /* sgtl5000 */ + REGULATOR_SUPPLY("VDDA", "0-000a"), +}; + +static struct regulator_consumer_supply vaudio_consumers[] = { + REGULATOR_SUPPLY("cmos_vio", "soc-camera-pdrv.0"), +}; + +static struct regulator_init_data sw1_init = { + .constraints = { + .name = "SW1", + .min_uV = 600000, + .max_uV = 1375000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .valid_modes_mask = 0, + .always_on = 1, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(sw1_consumers), + .consumer_supplies = sw1_consumers, +}; + +static struct regulator_init_data sw2_init = { + .constraints = { + .name = "SW2", + .always_on = 1, + .boot_on = 1, + } +}; + +static struct regulator_init_data sw3_init = { + .constraints = { + .name = "SW3", + .always_on = 1, + .boot_on = 1, + } +}; + +static struct regulator_init_data sw4_init = { + .constraints = { + .name = "SW4", + .always_on = 1, + .boot_on = 1, + } +}; + +static struct regulator_init_data viohi_init = { + .constraints = { + .name = "VIOHI", + .boot_on = 1, + } +}; + +static struct regulator_init_data vusb_init = { + .constraints = { + .name = "VUSB", + .boot_on = 1, + } +}; + +static struct regulator_init_data vdig_init = { + .constraints = { + .name = "VDIG", + .boot_on = 1, + } +}; + +static struct regulator_init_data vpll_init = { + .constraints = { + .name = "VPLL", + .boot_on = 1, + } +}; + +static struct regulator_init_data vusb2_init = { + .constraints = { + .name = "VUSB2", + .boot_on = 1, + } +}; + +static struct regulator_init_data vvideo_init = { + .constraints = { + .name = "VVIDEO", + .boot_on = 1 + } +}; + +static struct regulator_init_data vaudio_init = { + .constraints = { + .name = "VAUDIO", + .min_uV = 2300000, + .max_uV = 3000000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .boot_on = 1 + }, + .num_consumer_supplies = ARRAY_SIZE(vaudio_consumers), + .consumer_supplies = vaudio_consumers, +}; + +static struct regulator_init_data vcam_init = { + .constraints = { + .name = "VCAM", + .min_uV = 2500000, + .max_uV = 3000000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL, + .boot_on = 1 + }, + .num_consumer_supplies = ARRAY_SIZE(vcam_consumers), + .consumer_supplies = vcam_consumers, +}; + +static struct regulator_init_data vgen1_init = { + .constraints = { + .name = "VGEN1", + } +}; + +static struct regulator_init_data vgen2_init = { + .constraints = { + .name = "VGEN2", + .boot_on = 1, + } +}; + +static struct regulator_init_data vgen3_init = { + .constraints = { + .name = "VGEN3", + } +}; + +static struct mc13xxx_regulator_init_data mx35_3ds_regulators[] = { + { .id = MC13892_SW1, .init_data = &sw1_init }, + { .id = MC13892_SW2, .init_data = &sw2_init }, + { .id = MC13892_SW3, .init_data = &sw3_init }, + { .id = MC13892_SW4, .init_data = &sw4_init }, + { .id = MC13892_VIOHI, .init_data = &viohi_init }, + { .id = MC13892_VPLL, .init_data = &vpll_init }, + { .id = MC13892_VDIG, .init_data = &vdig_init }, + { .id = MC13892_VUSB2, .init_data = &vusb2_init }, + { .id = MC13892_VVIDEO, .init_data = &vvideo_init }, + { .id = MC13892_VAUDIO, .init_data = &vaudio_init }, + { .id = MC13892_VCAM, .init_data = &vcam_init }, + { .id = MC13892_VGEN1, .init_data = &vgen1_init }, + { .id = MC13892_VGEN2, .init_data = &vgen2_init }, + { .id = MC13892_VGEN3, .init_data = &vgen3_init }, + { .id = MC13892_VUSB, .init_data = &vusb_init }, +}; + +static struct mc13xxx_platform_data mx35_3ds_mc13892_data = { + .flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN, + .regulators = { + .num_regulators = ARRAY_SIZE(mx35_3ds_regulators), + .regulators = mx35_3ds_regulators, + }, +}; + +#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0) + +static struct i2c_board_info mx35_3ds_i2c_mc13892 = { + + I2C_BOARD_INFO("mc13892", 0x08), + .platform_data = &mx35_3ds_mc13892_data, + .irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT), +}; + +static void __init imx35_3ds_init_mc13892(void) +{ + int ret = gpio_request_one(GPIO_PMIC_INT, GPIOF_DIR_IN, "pmic irq"); + + if (ret) { + pr_err("failed to get pmic irq: %d\n", ret); + return; + } + + i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1); +} + static int mx35_3ds_otg_init(struct platform_device *pdev) { return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY); @@ -412,6 +603,8 @@ static void __init mx35_3ds_init(void) imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata); mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev; platform_device_register(&mx35_3ds_lcd); + + imx35_3ds_init_mc13892(); } static void __init mx35pdk_timer_init(void) diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 90ceab761929..199764fe0fb0 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -58,6 +58,28 @@ config MACH_DREAMPLUG_DT Say 'Y' here if you want your kernel to support the Marvell DreamPlug (Flattened Device Tree). +config MACH_ICONNECT_DT + bool "Iomega Iconnect (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here to enable Iomega Iconnect support. + +config MACH_DLINK_KIRKWOOD_DT + bool "D-Link Kirkwood-based NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Kirkwood-based D-Link NASes such as DNS-320 & DNS-325, + using Flattened Device Tree. + +config MACH_IB62X0_DT + bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + RaidSonic IB-NAS6210 & IB-NAS6220 devices, using + Flattened Device Tree. + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index e299a9576bf0..d2b05907b10e 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -22,3 +22,6 @@ obj-$(CONFIG_MACH_T5325) += t5325-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o +obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o +obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o +obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 16f938522304..02edbdf5b065 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -3,3 +3,7 @@ params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb +dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb +dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb +dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb +dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c new file mode 100644 index 000000000000..58c2d68f9443 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-dnskw.c @@ -0,0 +1,275 @@ +/* + * Copyright 2012 (C), Jamie Lentin <jm@lentin.co.uk> + * + * arch/arm/mach-kirkwood/board-dnskw.c + * + * D-link DNS-320 & DNS-325 NAS Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/of.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> +#include <linux/gpio-fan.h> +#include <linux/leds.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/kirkwood.h> +#include <mach/bridge-regs.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data dnskw_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static struct mv_sata_platform_data dnskw_sata_data = { + .n_ports = 2, +}; + +static unsigned int dnskw_mpp_config[] __initdata = { + MPP13_UART1_TXD, /* Custom ... */ + MPP14_UART1_RXD, /* ... Controller (DNS-320 only) */ + MPP20_SATA1_ACTn, /* LED: White Right HDD */ + MPP21_SATA0_ACTn, /* LED: White Left HDD */ + MPP24_GPIO, + MPP25_GPIO, + MPP26_GPIO, /* LED: Power */ + MPP27_GPIO, /* LED: Red Right HDD */ + MPP28_GPIO, /* LED: Red Left HDD */ + MPP29_GPIO, /* LED: Red USB (DNS-325 only) */ + MPP30_GPIO, + MPP31_GPIO, + MPP32_GPIO, + MPP33_GPO, + MPP34_GPIO, /* Button: Front power */ + MPP35_GPIO, /* LED: Red USB (DNS-320 only) */ + MPP36_GPIO, /* Power: Turn off board */ + MPP37_GPIO, /* Power: Turn back on after power failure */ + MPP38_GPIO, + MPP39_GPIO, /* Power: SATA0 */ + MPP40_GPIO, /* Power: SATA1 */ + MPP41_GPIO, /* SATA0 present */ + MPP42_GPIO, /* SATA1 present */ + MPP43_GPIO, /* LED: White USB */ + MPP44_GPIO, /* Fan: Tachometer Pin */ + MPP45_GPIO, /* Fan: high speed */ + MPP46_GPIO, /* Fan: low speed */ + MPP47_GPIO, /* Button: Back unmount */ + MPP48_GPIO, /* Button: Back reset */ + MPP49_GPIO, /* Temp Alarm (DNS-325) Pin of U5 (DNS-320) */ + 0 +}; + +static struct gpio_led dns325_led_pins[] = { + { + .name = "dns325:white:power", + .gpio = 26, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "dns325:white:usb", + .gpio = 43, + .active_low = 1, + }, + { + .name = "dns325:red:l_hdd", + .gpio = 28, + .active_low = 1, + }, + { + .name = "dns325:red:r_hdd", + .gpio = 27, + .active_low = 1, + }, + { + .name = "dns325:red:usb", + .gpio = 29, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data dns325_led_data = { + .num_leds = ARRAY_SIZE(dns325_led_pins), + .leds = dns325_led_pins, +}; + +static struct platform_device dns325_led_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &dns325_led_data, + }, +}; + +static struct gpio_led dns320_led_pins[] = { + { + .name = "dns320:blue:power", + .gpio = 26, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "dns320:blue:usb", + .gpio = 43, + .active_low = 1, + }, + { + .name = "dns320:orange:l_hdd", + .gpio = 28, + .active_low = 1, + }, + { + .name = "dns320:orange:r_hdd", + .gpio = 27, + .active_low = 1, + }, + { + .name = "dns320:orange:usb", + .gpio = 35, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data dns320_led_data = { + .num_leds = ARRAY_SIZE(dns320_led_pins), + .leds = dns320_led_pins, +}; + +static struct platform_device dns320_led_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &dns320_led_data, + }, +}; + +static struct i2c_board_info dns325_i2c_board_info[] __initdata = { + { + I2C_BOARD_INFO("lm75", 0x48), + }, + /* Something at 0x0c also */ +}; + +static struct gpio_keys_button dnskw_button_pins[] = { + { + .code = KEY_POWER, + .gpio = 34, + .desc = "Power button", + .active_low = 1, + }, + { + .code = KEY_EJECTCD, + .gpio = 47, + .desc = "USB unmount button", + .active_low = 1, + }, + { + .code = KEY_RESTART, + .gpio = 48, + .desc = "Reset button", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data dnskw_button_data = { + .buttons = dnskw_button_pins, + .nbuttons = ARRAY_SIZE(dnskw_button_pins), +}; + +static struct platform_device dnskw_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &dnskw_button_data, + } +}; + +/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */ +static struct gpio_fan_speed dnskw_fan_speed[] = { + { 0, 0 }, + { 3000, 1 }, + { 6000, 2 }, +}; +static unsigned dnskw_fan_pins[] = {46, 45}; + +static struct gpio_fan_platform_data dnskw_fan_data = { + .num_ctrl = ARRAY_SIZE(dnskw_fan_pins), + .ctrl = dnskw_fan_pins, + .num_speed = ARRAY_SIZE(dnskw_fan_speed), + .speed = dnskw_fan_speed, +}; + +static struct platform_device dnskw_fan_device = { + .name = "gpio-fan", + .id = -1, + .dev = { + .platform_data = &dnskw_fan_data, + }, +}; + +static void dnskw_power_off(void) +{ + gpio_set_value(36, 1); +} + +/* Register any GPIO for output and set the value */ +static void __init dnskw_gpio_register(unsigned gpio, char *name, int def) +{ + if (gpio_request(gpio, name) == 0 && + gpio_direction_output(gpio, 0) == 0) { + gpio_set_value(gpio, def); + if (gpio_export(gpio, 0) != 0) + pr_err("dnskw: Failed to export GPIO %s\n", name); + } else + pr_err("dnskw: Failed to register %s\n", name); +} + +void __init dnskw_init(void) +{ + kirkwood_mpp_conf(dnskw_mpp_config); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&dnskw_ge00_data); + kirkwood_sata_init(&dnskw_sata_data); + kirkwood_i2c_init(); + + platform_device_register(&dnskw_button_device); + platform_device_register(&dnskw_fan_device); + + if (of_machine_is_compatible("dlink,dns-325")) { + i2c_register_board_info(0, dns325_i2c_board_info, + ARRAY_SIZE(dns325_i2c_board_info)); + platform_device_register(&dns325_led_device); + + } else if (of_machine_is_compatible("dlink,dns-320")) + platform_device_register(&dns320_led_device); + + /* Register power-off GPIO. */ + if (gpio_request(36, "dnskw:power:off") == 0 + && gpio_direction_output(36, 0) == 0) + pm_power_off = dnskw_power_off; + else + pr_err("dnskw: failed to configure power-off GPIO\n"); + + /* Ensure power is supplied to both HDDs */ + dnskw_gpio_register(39, "dnskw:power:sata0", 1); + dnskw_gpio_register(40, "dnskw:power:sata1", 1); + + /* Set NAS to turn back on after a power failure */ + dnskw_gpio_register(37, "dnskw:power:recover", 1); +} diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index f7fe1b9f3170..10d1969b9e3a 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -56,11 +56,24 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("globalscale,dreamplug")) dreamplug_init(); + if (of_machine_is_compatible("dlink,dns-kirkwood")) + dnskw_init(); + + if (of_machine_is_compatible("iom,iconnect")) + iconnect_init(); + + if (of_machine_is_compatible("raidsonic,ib-nas62x0")) + ib62x0_init(); + of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL); } static const char *kirkwood_dt_board_compat[] = { "globalscale,dreamplug", + "dlink,dns-320", + "dlink,dns-325", + "iom,iconnect", + "raidsonic,ib-nas62x0", NULL }; diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c new file mode 100644 index 000000000000..eddf1df8891f --- /dev/null +++ b/arch/arm/mach-kirkwood/board-ib62x0.c @@ -0,0 +1,143 @@ +/* + * Copyright 2012 (C), Simon Baatz <gmbnomis@gmail.com> + * + * arch/arm/mach-kirkwood/board-ib62x0.c + * + * RaidSonic ICY BOX IB-NAS6210 & IB-NAS6220 init for drivers not + * converted to flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/leds.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include "common.h" +#include "mpp.h" + +#define IB62X0_GPIO_POWER_OFF 24 + +static struct mv643xx_eth_platform_data ib62x0_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static struct mv_sata_platform_data ib62x0_sata_data = { + .n_ports = 2, +}; + +static unsigned int ib62x0_mpp_config[] __initdata = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP22_GPIO, /* OS LED red */ + MPP24_GPIO, /* Power off device */ + MPP25_GPIO, /* OS LED green */ + MPP27_GPIO, /* USB transfer LED */ + MPP28_GPIO, /* Reset button */ + MPP29_GPIO, /* USB Copy button */ + 0 +}; + +static struct gpio_led ib62x0_led_pins[] = { + { + .name = "ib62x0:green:os", + .default_trigger = "default-on", + .gpio = 25, + .active_low = 0, + }, + { + .name = "ib62x0:red:os", + .default_trigger = "none", + .gpio = 22, + .active_low = 0, + }, + { + .name = "ib62x0:red:usb_copy", + .default_trigger = "none", + .gpio = 27, + .active_low = 0, + }, +}; + +static struct gpio_led_platform_data ib62x0_led_data = { + .leds = ib62x0_led_pins, + .num_leds = ARRAY_SIZE(ib62x0_led_pins), +}; + +static struct platform_device ib62x0_led_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &ib62x0_led_data, + } +}; + +static struct gpio_keys_button ib62x0_button_pins[] = { + { + .code = KEY_COPY, + .gpio = 29, + .desc = "USB Copy", + .active_low = 1, + }, + { + .code = KEY_RESTART, + .gpio = 28, + .desc = "Reset", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data ib62x0_button_data = { + .buttons = ib62x0_button_pins, + .nbuttons = ARRAY_SIZE(ib62x0_button_pins), +}; + +static struct platform_device ib62x0_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &ib62x0_button_data, + } +}; + +static void ib62x0_power_off(void) +{ + gpio_set_value(IB62X0_GPIO_POWER_OFF, 1); +} + +void __init ib62x0_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(ib62x0_mpp_config); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&ib62x0_ge00_data); + kirkwood_sata_init(&ib62x0_sata_data); + platform_device_register(&ib62x0_led_device); + platform_device_register(&ib62x0_button_device); + if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 && + gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0) + pm_power_off = ib62x0_power_off; + else + pr_err("board-ib62x0: failed to configure power-off GPIO\n"); +} diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c new file mode 100644 index 000000000000..2222c5739519 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -0,0 +1,165 @@ +/* + * arch/arm/mach-kirkwood/board-iconnect.c + * + * Iomega i-connect Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/mtd/partitions.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/spi/orion_spi.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data iconnect_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(11), +}; + +static struct gpio_led iconnect_led_pins[] = { + { + .name = "led_level", + .gpio = 41, + .default_trigger = "default-on", + }, { + .name = "power:blue", + .gpio = 42, + .default_trigger = "timer", + }, { + .name = "power:red", + .gpio = 43, + }, { + .name = "usb1:blue", + .gpio = 44, + }, { + .name = "usb2:blue", + .gpio = 45, + }, { + .name = "usb3:blue", + .gpio = 46, + }, { + .name = "usb4:blue", + .gpio = 47, + }, { + .name = "otb:blue", + .gpio = 48, + }, +}; + +static struct gpio_led_platform_data iconnect_led_data = { + .leds = iconnect_led_pins, + .num_leds = ARRAY_SIZE(iconnect_led_pins), + .gpio_blink_set = orion_gpio_led_blink_set, +}; + +static struct platform_device iconnect_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &iconnect_led_data, + } +}; + +static unsigned int iconnect_mpp_config[] __initdata = { + MPP12_GPIO, + MPP35_GPIO, + MPP41_GPIO, + MPP42_GPIO, + MPP43_GPIO, + MPP44_GPIO, + MPP45_GPIO, + MPP46_GPIO, + MPP47_GPIO, + MPP48_GPIO, + 0 +}; + +static struct i2c_board_info __initdata iconnect_board_info[] = { + { + I2C_BOARD_INFO("lm63", 0x4c), + }, +}; + +static struct mtd_partition iconnect_nand_parts[] = { + { + .name = "flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +/* yikes... theses are the original input buttons */ +/* but I'm not convinced by the sw event choices */ +static struct gpio_keys_button iconnect_buttons[] = { + { + .type = EV_SW, + .code = SW_LID, + .gpio = 12, + .desc = "Reset Button", + .active_low = 1, + .debounce_interval = 100, + }, { + .type = EV_SW, + .code = SW_TABLET_MODE, + .gpio = 35, + .desc = "OTB Button", + .active_low = 1, + .debounce_interval = 100, + }, +}; + +static struct gpio_keys_platform_data iconnect_button_data = { + .buttons = iconnect_buttons, + .nbuttons = ARRAY_SIZE(iconnect_buttons), +}; + +static struct platform_device iconnect_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &iconnect_button_data, + }, +}; + +void __init iconnect_init(void) +{ + kirkwood_mpp_conf(iconnect_mpp_config); + kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25); + kirkwood_i2c_init(); + i2c_register_board_info(0, iconnect_board_info, + ARRAY_SIZE(iconnect_board_info)); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&iconnect_ge00_data); + + platform_device_register(&iconnect_button_device); + platform_device_register(&iconnect_leds); +} + +static int __init iconnect_pci_init(void) +{ + if (of_machine_is_compatible("iom,iconnect")) + kirkwood_pcie_init(KW_PCIE0); + return 0; +} +subsys_initcall(iconnect_pci_init); diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index a02cae881f2f..3ad037385a5e 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -15,6 +15,7 @@ #include <linux/ata_platform.h> #include <linux/mtd/nand.h> #include <linux/dma-mapping.h> +#include <linux/of.h> #include <net/dsa.h> #include <asm/page.h> #include <asm/timex.h> @@ -482,6 +483,9 @@ static int __init kirkwood_clock_gate(void) unsigned int curr = readl(CLOCK_GATING_CTRL); u32 dev, rev; +#ifdef CONFIG_OF + struct device_node *np; +#endif kirkwood_pcie_id(&dev, &rev); printk(KERN_DEBUG "Gating clock of unused units\n"); printk(KERN_DEBUG "before: 0x%08x\n", curr); @@ -489,6 +493,14 @@ static int __init kirkwood_clock_gate(void) /* Make sure those units are accessible */ writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0 | CGC_PEX1, CLOCK_GATING_CTRL); +#ifdef CONFIG_OF + np = of_find_compatible_node(NULL, NULL, "mrvl,orion-nand"); + if (np && of_device_is_available(np)) { + kirkwood_clk_ctrl |= CGC_RUNIT; + of_node_put(np); + } +#endif + /* For SATA: first shutdown the phy */ if (!(kirkwood_clk_ctrl & CGC_SATA0)) { /* Disable PLL and IVREF */ diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index fa8e7689c436..a34c41a5172e 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -58,6 +58,24 @@ void dreamplug_init(void); static inline void dreamplug_init(void) {}; #endif +#ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT +void dnskw_init(void); +#else +static inline void dnskw_init(void) {}; +#endif + +#ifdef CONFIG_MACH_ICONNECT_DT +void iconnect_init(void); +#else +static inline void iconnect_init(void) {}; +#endif + +#ifdef CONFIG_MACH_IB62X0_DT +void ib62x0_init(void); +#else +static inline void ib62x0_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index ede721628150..7fddd01b85b9 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -122,4 +122,11 @@ config CPU_MMP2 select CPU_PJ4 help Select code specific to MMP2. MMP2 is ARMv7 compatible. + +config USB_EHCI_MV_U2O + bool "EHCI support for PXA USB OTG controller" + depends on USB_EHCI_MV + help + Enables support for OTG controller which can be switched to host mode. + endif diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index bf5d8e195c3e..223090b1444d 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -17,6 +17,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/interrupt.h> +#include <linux/platform_data/mv_usb.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -221,6 +222,21 @@ static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = { .debounce_interval = 30, }; +#if defined(CONFIG_USB_EHCI_MV) +static char *pxa168_sph_clock_name[] = { + [0] = "PXA168-USBCLK", +}; + +static struct mv_usb_platform_data pxa168_sph_pdata = { + .clknum = 1, + .clkname = pxa168_sph_clock_name, + .mode = MV_USB_MODE_HOST, + .phy_init = pxa_usb_phy_init, + .phy_deinit = pxa_usb_phy_deinit, + .set_vbus = NULL, +}; +#endif + static void __init common_init(void) { mfp_config(ARRAY_AND_SIZE(common_pin_config)); @@ -236,6 +252,10 @@ static void __init common_init(void) /* off-chip devices */ platform_device_register(&smc91x_device); + +#if defined(CONFIG_USB_EHCI_MV) + pxa168_add_usb_host(&pxa168_sph_pdata); +#endif } MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform") diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c index 191d9dea8731..dd2d8b103cc8 100644 --- a/arch/arm/mach-mmp/devices.c +++ b/arch/arm/mach-mmp/devices.c @@ -9,9 +9,13 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/delay.h> #include <asm/irq.h> +#include <mach/irqs.h> #include <mach/devices.h> +#include <mach/cputype.h> +#include <mach/regs-usb.h> int __init pxa_register_device(struct pxa_device_desc *desc, void *data, size_t size) @@ -67,3 +71,281 @@ int __init pxa_register_device(struct pxa_device_desc *desc, return platform_device_add(pdev); } + +#if defined(CONFIG_USB) || defined(CONFIG_USB_GADGET) + +/***************************************************************************** + * The registers read/write routines + *****************************************************************************/ + +static unsigned int u2o_get(void __iomem *base, unsigned int offset) +{ + return readl_relaxed(base + offset); +} + +static void u2o_set(void __iomem *base, unsigned int offset, + unsigned int value) +{ + u32 reg; + + reg = readl_relaxed(base + offset); + reg |= value; + writel_relaxed(reg, base + offset); + readl_relaxed(base + offset); +} + +static void u2o_clear(void __iomem *base, unsigned int offset, + unsigned int value) +{ + u32 reg; + + reg = readl_relaxed(base + offset); + reg &= ~value; + writel_relaxed(reg, base + offset); + readl_relaxed(base + offset); +} + +static void u2o_write(void __iomem *base, unsigned int offset, + unsigned int value) +{ + writel_relaxed(value, base + offset); + readl_relaxed(base + offset); +} + +#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV) + +#if defined(CONFIG_CPU_PXA910) || defined(CONFIG_CPU_PXA168) + +static DEFINE_MUTEX(phy_lock); +static int phy_init_cnt; + +static int usb_phy_init_internal(void __iomem *base) +{ + int loops; + + pr_info("Init usb phy!!!\n"); + + /* Initialize the USB PHY power */ + if (cpu_is_pxa910()) { + u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT) + | (1<<UTMI_CTRL_PU_REF_SHIFT)); + } + + u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT); + u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT); + + /* UTMI_PLL settings */ + u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK + | UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK + | UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK + | UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK); + + u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT + | 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT + | 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT + | 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT); + + /* UTMI_TX */ + u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK + | UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK + | UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK + | UTMI_TX_AMP_MASK); + u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT + | 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT + | 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT); + + /* UTMI_RX */ + u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK + | UTMI_REG_SQ_LENGTH_MASK); + u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT + | 2<<UTMI_REG_SQ_LENGTH_SHIFT); + + /* UTMI_IVREF */ + if (cpu_is_pxa168()) + /* fixing Microsoft Altair board interface with NEC hub issue - + * Set UTMI_IVREF from 0x4a3 to 0x4bf */ + u2o_write(base, UTMI_IVREF, 0x4bf); + + /* toggle VCOCAL_START bit of UTMI_PLL */ + udelay(200); + u2o_set(base, UTMI_PLL, VCOCAL_START); + udelay(40); + u2o_clear(base, UTMI_PLL, VCOCAL_START); + + /* toggle REG_RCAL_START bit of UTMI_TX */ + udelay(400); + u2o_set(base, UTMI_TX, REG_RCAL_START); + udelay(40); + u2o_clear(base, UTMI_TX, REG_RCAL_START); + udelay(400); + + /* Make sure PHY PLL is ready */ + loops = 0; + while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) { + mdelay(1); + loops++; + if (loops > 100) { + printk(KERN_WARNING "calibrate timeout, UTMI_PLL %x\n", + u2o_get(base, UTMI_PLL)); + break; + } + } + + if (cpu_is_pxa168()) { + u2o_set(base, UTMI_RESERVE, 1 << 5); + /* Turn on UTMI PHY OTG extension */ + u2o_write(base, UTMI_OTG_ADDON, 1); + } + + return 0; +} + +static int usb_phy_deinit_internal(void __iomem *base) +{ + pr_info("Deinit usb phy!!!\n"); + + if (cpu_is_pxa168()) + u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON); + + u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN); + u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN); + u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN); + u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT); + u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT); + + return 0; +} + +int pxa_usb_phy_init(void __iomem *phy_reg) +{ + mutex_lock(&phy_lock); + if (phy_init_cnt++ == 0) + usb_phy_init_internal(phy_reg); + mutex_unlock(&phy_lock); + return 0; +} + +void pxa_usb_phy_deinit(void __iomem *phy_reg) +{ + WARN_ON(phy_init_cnt == 0); + + mutex_lock(&phy_lock); + if (--phy_init_cnt == 0) + usb_phy_deinit_internal(phy_reg); + mutex_unlock(&phy_lock); +} +#endif +#endif +#endif + +#ifdef CONFIG_USB_SUPPORT +static u64 usb_dma_mask = ~(u32)0; + +#ifdef CONFIG_USB_MV_UDC +struct resource pxa168_u2o_resources[] = { + /* regbase */ + [0] = { + .start = PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET, + .end = PXA168_U2O_REGBASE + USB_REG_RANGE, + .flags = IORESOURCE_MEM, + .name = "capregs", + }, + /* phybase */ + [1] = { + .start = PXA168_U2O_PHYBASE, + .end = PXA168_U2O_PHYBASE + USB_PHY_RANGE, + .flags = IORESOURCE_MEM, + .name = "phyregs", + }, + [2] = { + .start = IRQ_PXA168_USB1, + .end = IRQ_PXA168_USB1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa168_device_u2o = { + .name = "mv-udc", + .id = -1, + .resource = pxa168_u2o_resources, + .num_resources = ARRAY_SIZE(pxa168_u2o_resources), + .dev = { + .dma_mask = &usb_dma_mask, + .coherent_dma_mask = 0xffffffff, + } +}; +#endif /* CONFIG_USB_MV_UDC */ + +#ifdef CONFIG_USB_EHCI_MV_U2O +struct resource pxa168_u2oehci_resources[] = { + /* regbase */ + [0] = { + .start = PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET, + .end = PXA168_U2O_REGBASE + USB_REG_RANGE, + .flags = IORESOURCE_MEM, + .name = "capregs", + }, + /* phybase */ + [1] = { + .start = PXA168_U2O_PHYBASE, + .end = PXA168_U2O_PHYBASE + USB_PHY_RANGE, + .flags = IORESOURCE_MEM, + .name = "phyregs", + }, + [2] = { + .start = IRQ_PXA168_USB1, + .end = IRQ_PXA168_USB1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa168_device_u2oehci = { + .name = "pxa-u2oehci", + .id = -1, + .dev = { + .dma_mask = &usb_dma_mask, + .coherent_dma_mask = 0xffffffff, + }, + + .num_resources = ARRAY_SIZE(pxa168_u2oehci_resources), + .resource = pxa168_u2oehci_resources, +}; +#endif + +#if defined(CONFIG_USB_MV_OTG) +struct resource pxa168_u2ootg_resources[] = { + /* regbase */ + [0] = { + .start = PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET, + .end = PXA168_U2O_REGBASE + USB_REG_RANGE, + .flags = IORESOURCE_MEM, + .name = "capregs", + }, + /* phybase */ + [1] = { + .start = PXA168_U2O_PHYBASE, + .end = PXA168_U2O_PHYBASE + USB_PHY_RANGE, + .flags = IORESOURCE_MEM, + .name = "phyregs", + }, + [2] = { + .start = IRQ_PXA168_USB1, + .end = IRQ_PXA168_USB1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa168_device_u2ootg = { + .name = "mv-otg", + .id = -1, + .dev = { + .dma_mask = &usb_dma_mask, + .coherent_dma_mask = 0xffffffff, + }, + + .num_resources = ARRAY_SIZE(pxa168_u2ootg_resources), + .resource = pxa168_u2ootg_resources, +}; +#endif /* CONFIG_USB_MV_OTG */ + +#endif diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/include/mach/devices.h index d0ec7dae88e4..21217ef11b64 100644 --- a/arch/arm/mach-mmp/include/mach/devices.h +++ b/arch/arm/mach-mmp/include/mach/devices.h @@ -50,4 +50,7 @@ struct pxa_device_desc mmp2_device_##_name __initdata = { \ } extern int pxa_register_device(struct pxa_device_desc *, void *, size_t); +extern int pxa_usb_phy_init(void __iomem *phy_reg); +extern void pxa_usb_phy_deinit(void __iomem *phy_reg); + #endif /* __MACH_DEVICE_H */ diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index dc03d580a06d..09dcd6e2b6a8 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -16,6 +16,7 @@ extern void pxa168_clear_keypad_wakeup(void); #include <plat/pxa27x_keypad.h> #include <mach/cputype.h> #include <linux/pxa168_eth.h> +#include <linux/platform_data/mv_usb.h> extern struct pxa_device_desc pxa168_device_uart1; extern struct pxa_device_desc pxa168_device_uart2; @@ -36,12 +37,9 @@ extern struct pxa_device_desc pxa168_device_fb; extern struct pxa_device_desc pxa168_device_keypad; extern struct pxa_device_desc pxa168_device_eth; -struct pxa168_usb_pdata { - /* If NULL, default phy init routine for PXA168 would be called */ - int (*phy_init)(void __iomem *usb_phy_reg_base); -}; /* pdata can be NULL */ -int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata); +extern int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata); + extern struct platform_device pxa168_device_gpio; diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h index e2e1f1e5e124..793634c837ef 100644 --- a/arch/arm/mach-mmp/include/mach/pxa910.h +++ b/arch/arm/mach-mmp/include/mach/pxa910.h @@ -20,6 +20,9 @@ extern struct pxa_device_desc pxa910_device_pwm2; extern struct pxa_device_desc pxa910_device_pwm3; extern struct pxa_device_desc pxa910_device_pwm4; extern struct pxa_device_desc pxa910_device_nand; +extern struct platform_device pxa168_device_u2o; +extern struct platform_device pxa168_device_u2ootg; +extern struct platform_device pxa168_device_u2oehci; extern struct platform_device pxa910_device_gpio; extern struct platform_device pxa910_device_rtc; diff --git a/arch/arm/mach-mmp/include/mach/regs-usb.h b/arch/arm/mach-mmp/include/mach/regs-usb.h new file mode 100644 index 000000000000..b047bf487506 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/regs-usb.h @@ -0,0 +1,253 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ASM_ARCH_REGS_USB_H +#define __ASM_ARCH_REGS_USB_H + +#define PXA168_U2O_REGBASE (0xd4208000) +#define PXA168_U2O_PHYBASE (0xd4207000) + +#define PXA168_U2H_REGBASE (0xd4209000) +#define PXA168_U2H_PHYBASE (0xd4206000) + +#define MMP3_HSIC1_REGBASE (0xf0001000) +#define MMP3_HSIC1_PHYBASE (0xf0001800) + +#define MMP3_HSIC2_REGBASE (0xf0002000) +#define MMP3_HSIC2_PHYBASE (0xf0002800) + +#define MMP3_FSIC_REGBASE (0xf0003000) +#define MMP3_FSIC_PHYBASE (0xf0003800) + + +#define USB_REG_RANGE (0x1ff) +#define USB_PHY_RANGE (0xff) + +/* registers */ +#define U2x_CAPREGS_OFFSET 0x100 + +/* phy regs */ +#define UTMI_REVISION 0x0 +#define UTMI_CTRL 0x4 +#define UTMI_PLL 0x8 +#define UTMI_TX 0xc +#define UTMI_RX 0x10 +#define UTMI_IVREF 0x14 +#define UTMI_T0 0x18 +#define UTMI_T1 0x1c +#define UTMI_T2 0x20 +#define UTMI_T3 0x24 +#define UTMI_T4 0x28 +#define UTMI_T5 0x2c +#define UTMI_RESERVE 0x30 +#define UTMI_USB_INT 0x34 +#define UTMI_DBG_CTL 0x38 +#define UTMI_OTG_ADDON 0x3c + +/* For UTMICTRL Register */ +#define UTMI_CTRL_USB_CLK_EN (1 << 31) +/* pxa168 */ +#define UTMI_CTRL_SUSPEND_SET1 (1 << 30) +#define UTMI_CTRL_SUSPEND_SET2 (1 << 29) +#define UTMI_CTRL_RXBUF_PDWN (1 << 24) +#define UTMI_CTRL_TXBUF_PDWN (1 << 11) + +#define UTMI_CTRL_INPKT_DELAY_SHIFT 30 +#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT 28 +#define UTMI_CTRL_PU_REF_SHIFT 20 +#define UTMI_CTRL_ARC_PULLDN_SHIFT 12 +#define UTMI_CTRL_PLL_PWR_UP_SHIFT 1 +#define UTMI_CTRL_PWR_UP_SHIFT 0 + +/* For UTMI_PLL Register */ +#define UTMI_PLL_PLLCALI12_SHIFT 29 +#define UTMI_PLL_PLLCALI12_MASK (0x3 << 29) + +#define UTMI_PLL_PLLVDD18_SHIFT 27 +#define UTMI_PLL_PLLVDD18_MASK (0x3 << 27) + +#define UTMI_PLL_PLLVDD12_SHIFT 25 +#define UTMI_PLL_PLLVDD12_MASK (0x3 << 25) + +#define UTMI_PLL_CLK_BLK_EN_SHIFT 24 +#define CLK_BLK_EN (0x1 << 24) +#define PLL_READY (0x1 << 23) +#define KVCO_EXT (0x1 << 22) +#define VCOCAL_START (0x1 << 21) + +#define UTMI_PLL_KVCO_SHIFT 15 +#define UTMI_PLL_KVCO_MASK (0x7 << 15) + +#define UTMI_PLL_ICP_SHIFT 12 +#define UTMI_PLL_ICP_MASK (0x7 << 12) + +#define UTMI_PLL_FBDIV_SHIFT 4 +#define UTMI_PLL_FBDIV_MASK (0xFF << 4) + +#define UTMI_PLL_REFDIV_SHIFT 0 +#define UTMI_PLL_REFDIV_MASK (0xF << 0) + +/* For UTMI_TX Register */ +#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT 27 +#define UTMI_TX_REG_EXT_FS_RCAL_MASK (0xf << 27) + +#define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT 26 +#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK (0x1 << 26) + +#define UTMI_TX_TXVDD12_SHIFT 22 +#define UTMI_TX_TXVDD12_MASK (0x3 << 22) + +#define UTMI_TX_CK60_PHSEL_SHIFT 17 +#define UTMI_TX_CK60_PHSEL_MASK (0xf << 17) + +#define UTMI_TX_IMPCAL_VTH_SHIFT 14 +#define UTMI_TX_IMPCAL_VTH_MASK (0x7 << 14) + +#define REG_RCAL_START (0x1 << 12) + +#define UTMI_TX_LOW_VDD_EN_SHIFT 11 + +#define UTMI_TX_AMP_SHIFT 0 +#define UTMI_TX_AMP_MASK (0x7 << 0) + +/* For UTMI_RX Register */ +#define UTMI_REG_SQ_LENGTH_SHIFT 15 +#define UTMI_REG_SQ_LENGTH_MASK (0x3 << 15) + +#define UTMI_RX_SQ_THRESH_SHIFT 4 +#define UTMI_RX_SQ_THRESH_MASK (0xf << 4) + +#define UTMI_OTG_ADDON_OTG_ON (1 << 0) + +/* For MMP3 USB Phy */ +#define USB2_PLL_REG0 0x4 +#define USB2_PLL_REG1 0x8 +#define USB2_TX_REG0 0x10 +#define USB2_TX_REG1 0x14 +#define USB2_TX_REG2 0x18 +#define USB2_RX_REG0 0x20 +#define USB2_RX_REG1 0x24 +#define USB2_RX_REG2 0x28 +#define USB2_ANA_REG0 0x30 +#define USB2_ANA_REG1 0x34 +#define USB2_ANA_REG2 0x38 +#define USB2_DIG_REG0 0x3C +#define USB2_DIG_REG1 0x40 +#define USB2_DIG_REG2 0x44 +#define USB2_DIG_REG3 0x48 +#define USB2_TEST_REG0 0x4C +#define USB2_TEST_REG1 0x50 +#define USB2_TEST_REG2 0x54 +#define USB2_CHARGER_REG0 0x58 +#define USB2_OTG_REG0 0x5C +#define USB2_PHY_MON0 0x60 +#define USB2_RESETVE_REG0 0x64 +#define USB2_ICID_REG0 0x78 +#define USB2_ICID_REG1 0x7C + +/* USB2_PLL_REG0 */ +/* This is for Ax stepping */ +#define USB2_PLL_FBDIV_SHIFT_MMP3 0 +#define USB2_PLL_FBDIV_MASK_MMP3 (0xFF << 0) + +#define USB2_PLL_REFDIV_SHIFT_MMP3 8 +#define USB2_PLL_REFDIV_MASK_MMP3 (0xF << 8) + +#define USB2_PLL_VDD12_SHIFT_MMP3 12 +#define USB2_PLL_VDD18_SHIFT_MMP3 14 + +/* This is for B0 stepping */ +#define USB2_PLL_FBDIV_SHIFT_MMP3_B0 0 +#define USB2_PLL_REFDIV_SHIFT_MMP3_B0 9 +#define USB2_PLL_VDD18_SHIFT_MMP3_B0 14 +#define USB2_PLL_FBDIV_MASK_MMP3_B0 0x01FF +#define USB2_PLL_REFDIV_MASK_MMP3_B0 0x3E00 + +#define USB2_PLL_CAL12_SHIFT_MMP3 0 +#define USB2_PLL_CALI12_MASK_MMP3 (0x3 << 0) + +#define USB2_PLL_VCOCAL_START_SHIFT_MMP3 2 + +#define USB2_PLL_KVCO_SHIFT_MMP3 4 +#define USB2_PLL_KVCO_MASK_MMP3 (0x7<<4) + +#define USB2_PLL_ICP_SHIFT_MMP3 8 +#define USB2_PLL_ICP_MASK_MMP3 (0x7<<8) + +#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3 12 + +#define USB2_PLL_PU_PLL_SHIFT_MMP3 13 +#define USB2_PLL_PU_PLL_MASK (0x1 << 13) + +#define USB2_PLL_READY_MASK_MMP3 (0x1 << 15) + +/* USB2_TX_REG0 */ +#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3 8 +#define USB2_TX_IMPCAL_VTH_MASK_MMP3 (0x7 << 8) + +#define USB2_TX_RCAL_START_SHIFT_MMP3 13 + +/* USB2_TX_REG1 */ +#define USB2_TX_CK60_PHSEL_SHIFT_MMP3 0 +#define USB2_TX_CK60_PHSEL_MASK_MMP3 (0xf << 0) + +#define USB2_TX_AMP_SHIFT_MMP3 4 +#define USB2_TX_AMP_MASK_MMP3 (0x7 << 4) + +#define USB2_TX_VDD12_SHIFT_MMP3 8 +#define USB2_TX_VDD12_MASK_MMP3 (0x3 << 8) + +/* USB2_TX_REG2 */ +#define USB2_TX_DRV_SLEWRATE_SHIFT 10 + +/* USB2_RX_REG0 */ +#define USB2_RX_SQ_THRESH_SHIFT_MMP3 4 +#define USB2_RX_SQ_THRESH_MASK_MMP3 (0xf << 4) + +#define USB2_RX_SQ_LENGTH_SHIFT_MMP3 10 +#define USB2_RX_SQ_LENGTH_MASK_MMP3 (0x3 << 10) + +/* USB2_ANA_REG1*/ +#define USB2_ANA_PU_ANA_SHIFT_MMP3 14 + +/* USB2_OTG_REG0 */ +#define USB2_OTG_PU_OTG_SHIFT_MMP3 3 + +/* fsic registers */ +#define FSIC_MISC 0x4 +#define FSIC_INT 0x28 +#define FSIC_CTRL 0x30 + +/* HSIC registers */ +#define HSIC_PAD_CTRL 0x4 + +#define HSIC_CTRL 0x8 +#define HSIC_CTRL_HSIC_ENABLE (1<<7) +#define HSIC_CTRL_PLL_BYPASS (1<<4) + +#define TEST_GRP_0 0xc +#define TEST_GRP_1 0x10 + +#define HSIC_INT 0x14 +#define HSIC_INT_READY_INT_EN (1<<10) +#define HSIC_INT_CONNECT_INT_EN (1<<9) +#define HSIC_INT_CORE_INT_EN (1<<8) +#define HSIC_INT_HS_READY (1<<2) +#define HSIC_INT_CONNECT (1<<1) +#define HSIC_INT_CORE (1<<0) + +#define HSIC_CONFIG 0x18 +#define USBHSIC_CTRL 0x20 + +#define HSIC_USB_CTRL 0x28 +#define HSIC_USB_CTRL_CLKEN 1 +#define HSIC_USB_CLK_PHY 0x0 +#define HSIC_USB_CLK_PMU 0x1 + +#endif /* __ASM_ARCH_PXA_U2O_H */ diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index b24d2c32cba9..62d787c34475 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -14,6 +14,7 @@ #include <linux/io.h> #include <linux/clk.h> #include <linux/platform_device.h> +#include <linux/platform_data/mv_usb.h> #include <asm/mach/time.h> #include <asm/system_misc.h> @@ -27,6 +28,7 @@ #include <mach/mfp.h> #include <linux/dma-mapping.h> #include <mach/pxa168.h> +#include <mach/regs-usb.h> #include "common.h" #include "clock.h" @@ -93,7 +95,7 @@ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL), INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"), - INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"), + INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"), INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), }; @@ -184,17 +186,17 @@ struct platform_device pxa168_device_gpio = { struct resource pxa168_usb_host_resources[] = { /* USB Host conroller register base */ [0] = { - .start = 0xd4209000, - .end = 0xd4209000 + 0x200, + .start = PXA168_U2H_REGBASE + U2x_CAPREGS_OFFSET, + .end = PXA168_U2H_REGBASE + USB_REG_RANGE, .flags = IORESOURCE_MEM, - .name = "pxa168-usb-host", + .name = "capregs", }, /* USB PHY register base */ [1] = { - .start = 0xd4206000, - .end = 0xd4206000 + 0xff, + .start = PXA168_U2H_PHYBASE, + .end = PXA168_U2H_PHYBASE + USB_PHY_RANGE, .flags = IORESOURCE_MEM, - .name = "pxa168-usb-phy", + .name = "phyregs", }, [2] = { .start = IRQ_PXA168_USB2, @@ -205,7 +207,7 @@ struct resource pxa168_usb_host_resources[] = { static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32); struct platform_device pxa168_device_usb_host = { - .name = "pxa168-ehci", + .name = "pxa-sph", .id = -1, .dev = { .dma_mask = &pxa168_usb_host_dmamask, @@ -216,7 +218,7 @@ struct platform_device pxa168_device_usb_host = { .resource = pxa168_usb_host_resources, }; -int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata) +int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata) { pxa168_device_usb_host.dev.platform_data = pdata; return platform_device_register(&pxa168_device_usb_host); diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 43f8bcc29b67..6da52e9f2bdc 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -109,7 +109,7 @@ static struct clk_lookup pxa910_clkregs[] = { INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), - INIT_CLKREG(&clk_u2o, "pxa-u2o", "U2OCLK"), + INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"), INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), }; diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index e8cf5ea15263..7a7de2b12a62 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -18,6 +18,7 @@ #include <linux/i2c/pca953x.h> #include <linux/gpio.h> #include <linux/mfd/88pm860x.h> +#include <linux/platform_data/mv_usb.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -26,6 +27,7 @@ #include <mach/mfp-pxa910.h> #include <mach/pxa910.h> #include <mach/irqs.h> +#include <mach/regs-usb.h> #include "common.h" @@ -155,6 +157,26 @@ static struct i2c_board_info ttc_dkb_i2c_info[] = { }, }; +#ifdef CONFIG_USB_SUPPORT +#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV_U2O) + +static char *pxa910_usb_clock_name[] = { + [0] = "U2OCLK", +}; + +static struct mv_usb_platform_data ttc_usb_pdata = { + .clknum = 1, + .clkname = pxa910_usb_clock_name, + .vbus = NULL, + .mode = MV_USB_MODE_OTG, + .otg_force_a_bus_req = 1, + .phy_init = pxa_usb_phy_init, + .phy_deinit = pxa_usb_phy_deinit, + .set_vbus = NULL, +}; +#endif +#endif + static void __init ttc_dkb_init(void) { mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config)); @@ -165,6 +187,21 @@ static void __init ttc_dkb_init(void) /* off-chip devices */ pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info)); platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices)); + +#ifdef CONFIG_USB_MV_UDC + pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata; + platform_device_register(&pxa168_device_u2o); +#endif + +#ifdef CONFIG_USB_EHCI_MV_U2O + pxa168_device_u2oehci.dev.platform_data = &ttc_usb_pdata; + platform_device_register(&pxa168_device_u2oehci); +#endif + +#ifdef CONFIG_USB_MV_OTG + pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata; + platform_device_register(&pxa168_device_u2ootg); +#endif } MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform") diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 8141b76283a6..964ee67a3b77 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -17,6 +17,7 @@ config ARCH_OMAP2PLUS_TYPICAL select MENELAUS if ARCH_OMAP2 select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 + select HIGHMEM help Compile a kernel suitable for booting most boards diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 4a9bc00a7d98..94af6cde2e36 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -384,6 +384,11 @@ static struct platform_device sdp4430_dmic_codec = { .id = -1, }; +static struct platform_device sdp4430_hdmi_audio_codec = { + .name = "hdmi-audio-codec", + .id = -1, +}; + static struct omap_abe_twl6040_data sdp4430_abe_audio_data = { .card_name = "SDP4430", .has_hs = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, @@ -418,6 +423,7 @@ static struct platform_device *sdp4430_devices[] __initdata = { &sdp4430_vbat, &sdp4430_dmic_codec, &sdp4430_abe_audio, + &sdp4430_hdmi_audio_codec, }; static struct omap_musb_board_data musb_board_data = { @@ -571,7 +577,9 @@ static int __init omap4_i2c_init(void) TWL_COMMON_REGULATOR_VANA | TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | - TWL_COMMON_REGULATOR_CLK32KG); + TWL_COMMON_REGULATOR_CLK32KG | + TWL_COMMON_REGULATOR_V1V8 | + TWL_COMMON_REGULATOR_V2V1); omap4_pmic_init("twl6030", &sdp4430_twldata, &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index c3851e8de28b..3b8a53c1f2a8 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -30,6 +30,7 @@ #include "common.h" #include <plat/usb.h> +#include "am35xx-emac.h" #include "mux.h" #include "control.h" @@ -90,6 +91,7 @@ static void __init am3517_crane_init(void) } usbhs_init(&usbhs_bdata); + am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); } MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 45746cb56c68..c03df142ea67 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -476,6 +476,10 @@ static struct twl4030_gpio_platform_data cm_t35_gpio_data = { .setup = cm_t35_twl_gpio_setup, }; +static struct twl4030_power_data cm_t35_power_data = { + .use_poweroff = true, +}; + static struct twl4030_platform_data cm_t35_twldata = { /* platform_data for children goes here */ .keypad = &cm_t35_kp_data, @@ -483,6 +487,7 @@ static struct twl4030_platform_data cm_t35_twldata = { .vmmc1 = &cm_t35_vmmc1, .vsim = &cm_t35_vsim, .vio = &cm_t35_vio, + .power = &cm_t35_power_data, }; static void __init cm_t35_init_i2c(void) diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 0349fd2b68d8..70a81f900bb5 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -87,7 +87,7 @@ static struct omap_onenand_platform_data board_onenand_data = { .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ }; -static void +void __init board_onenand_init(struct mtd_partition *onenand_parts, u8 nr_parts, u8 cs) { @@ -98,7 +98,7 @@ __init board_onenand_init(struct mtd_partition *onenand_parts, gpmc_onenand_init(&board_onenand_data); } #else -static void +void __init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs) { } diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h index d25503a98417..c44b70d52021 100644 --- a/arch/arm/mach-omap2/board-flash.h +++ b/arch/arm/mach-omap2/board-flash.h @@ -47,3 +47,14 @@ static inline void board_nand_init(struct mtd_partition *nand_parts, { } #endif + +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) +extern void board_onenand_init(struct mtd_partition *nand_parts, + u8 nr_parts, u8 cs); +#else +static inline void board_onenand_init(struct mtd_partition *nand_parts, + u8 nr_parts, u8 cs) +{ +} +#endif diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 4c1acecce93f..7a274098f67b 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -24,6 +24,8 @@ #include <linux/i2c/twl.h> #include <linux/mmc/host.h> +#include <linux/mtd/nand.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -39,6 +41,8 @@ #include "hsmmc.h" #include "sdram-numonyx-m65kxxxxam.h" #include "common-board-devices.h" +#include "board-flash.h" +#include "control.h" #define IGEP2_SMSC911X_CS 5 #define IGEP2_SMSC911X_GPIO 176 @@ -60,6 +64,10 @@ #define IGEP3_GPIO_LED1_RED 16 #define IGEP3_GPIO_USBH_NRESET 183 +#define IGEP_SYSBOOT_MASK 0x1f +#define IGEP_SYSBOOT_NAND 0x0f +#define IGEP_SYSBOOT_ONENAND 0x10 + /* * IGEP2 Hardware Revision Table * @@ -110,8 +118,10 @@ static void __init igep2_get_revision(void) gpio_free(IGEP2_GPIO_LED1_RED); } -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) || \ + defined(CONFIG_MTD_NAND_OMAP2) || \ + defined(CONFIG_MTD_NAND_OMAP2_MODULE) #define ONENAND_MAP 0x20000000 @@ -123,7 +133,7 @@ static void __init igep2_get_revision(void) * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048) */ -static struct mtd_partition igep_onenand_partitions[] = { +static struct mtd_partition igep_flash_partitions[] = { { .name = "X-Loader", .offset = 0, @@ -151,50 +161,28 @@ static struct mtd_partition igep_onenand_partitions[] = { }, }; -static struct omap_onenand_platform_data igep_onenand_data = { - .parts = igep_onenand_partitions, - .nr_parts = ARRAY_SIZE(igep_onenand_partitions), - .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ -}; - -static struct platform_device igep_onenand_device = { - .name = "omap2-onenand", - .id = -1, - .dev = { - .platform_data = &igep_onenand_data, - }, -}; +static inline u32 igep_get_sysboot_value(void) +{ + return omap_ctrl_readl(OMAP343X_CONTROL_STATUS) & IGEP_SYSBOOT_MASK; +} static void __init igep_flash_init(void) { - u8 cs = 0; - u8 onenandcs = GPMC_CS_NUM + 1; - - for (cs = 0; cs < GPMC_CS_NUM; cs++) { - u32 ret; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - /* Check if NAND/oneNAND is configured */ - if ((ret & 0xC00) == 0x800) - /* NAND found */ - pr_err("IGEP: Unsupported NAND found\n"); - else { - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); - if ((ret & 0x3F) == (ONENAND_MAP >> 24)) - /* ONENAND found */ - onenandcs = cs; - } - } - - if (onenandcs > GPMC_CS_NUM) { - pr_err("IGEP: Unable to find configuration in GPMC\n"); - return; + u32 mux; + mux = igep_get_sysboot_value(); + + if (mux == IGEP_SYSBOOT_NAND) { + pr_info("IGEP: initializing NAND memory device\n"); + board_nand_init(igep_flash_partitions, + ARRAY_SIZE(igep_flash_partitions), + 0, NAND_BUSWIDTH_16); + } else if (mux == IGEP_SYSBOOT_ONENAND) { + pr_info("IGEP: initializing OneNAND memory device\n"); + board_onenand_init(igep_flash_partitions, + ARRAY_SIZE(igep_flash_partitions), 0); + } else { + pr_err("IGEP: Flash: unsupported sysboot sequence found\n"); } - - igep_onenand_data.cs = onenandcs; - - if (platform_device_register(&igep_onenand_device) < 0) - pr_err("IGEP: Unable to register OneNAND device\n"); } #else diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 8ede8d20d7b2..2a7b9a9da1db 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -83,11 +83,13 @@ static struct { int usb_pwr_level; int reset_gpio; int usr_button_gpio; + int mmc_caps; } beagle_config = { .mmc1_gpio_wp = -EINVAL, .usb_pwr_level = GPIOF_OUT_INIT_LOW, .reset_gpio = 129, .usr_button_gpio = 4, + .mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, }; static struct gpio omap3_beagle_rev_gpios[] __initdata = { @@ -145,10 +147,12 @@ static void __init omap3_beagle_init_rev(void) printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_XM; beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH; + beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA; break; case 2: printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC; + beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA; break; default: printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev); @@ -225,7 +229,7 @@ static struct omap_dss_board_info beagle_dss_data = { static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .caps = MMC_CAP_4_BIT_DATA, .gpio_wp = -EINVAL, .deferred = true, }, @@ -497,6 +501,7 @@ static void __init omap3_beagle_init(void) if (beagle_config.mmc1_gpio_wp != -EINVAL) omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); + mmc[0].caps = beagle_config.mmc_caps; omap_hsmmc_init(mmc); omap3_beagle_i2c_init(); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 9b3c141ff51b..c008bf8e1c36 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -4,8 +4,9 @@ * Copyright (C) 2010 Li-Pro.Net * Stephan Linz <linz@li-pro.net> * - * Copyright (C) 2010 Logic Product Development, Inc. + * Copyright (C) 2010-2012 Logic Product Development, Inc. * Peter Barada <peter.barada@logicpd.com> + * Ashwin BIhari <ashwin.bihari@logicpd.com> * * Modified from Beagle, EVM, and RX51 * @@ -45,6 +46,7 @@ #include <plat/gpmc-smsc911x.h> #include <plat/gpmc.h> #include <plat/sdrc.h> +#include <plat/usb.h> #define OMAP3LOGIC_SMSC911X_CS 1 @@ -85,6 +87,11 @@ static struct twl4030_gpio_platform_data omap3logic_gpio_data = { | BIT(13) | BIT(15) | BIT(16) | BIT(17), }; +static struct twl4030_usb_data omap3logic_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + + static struct twl4030_platform_data omap3logic_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -92,6 +99,7 @@ static struct twl4030_platform_data omap3logic_twldata = { /* platform_data for children goes here */ .gpio = &omap3logic_gpio_data, .vmmc1 = &omap3logic_vmmc1, + .usb = &omap3logic_usb_data, }; static int __init omap3logic_i2c_init(void) @@ -185,6 +193,20 @@ static inline void __init board_smsc911x_init(void) #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* mUSB */ + OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif @@ -205,6 +227,8 @@ static void __init omap3logic_init(void) board_mmc_init(); board_smsc911x_init(); + usb_musb_init(NULL); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index bb75eb091a88..68b8fc9ff010 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -28,6 +28,7 @@ #include <linux/mfd/twl6040.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> +#include <linux/ti_wilink_st.h> #include <linux/wl12xx.h> #include <linux/platform_data/omap-abe-twl6040.h> @@ -58,12 +59,21 @@ #define HDMI_GPIO_HPD 63 /* Hotplug detect */ /* wl127x BT, FM, GPS connectivity chip */ -static int wl1271_gpios[] = {46, -1, -1}; +static struct ti_st_plat_data wilink_platform_data = { + .nshutdown_gpio = 46, + .dev_name = "/dev/ttyO1", + .flow_cntrl = 1, + .baud_rate = 3000000, + .chip_enable = NULL, + .suspend = NULL, + .resume = NULL, +}; + static struct platform_device wl1271_device = { .name = "kim", .id = -1, .dev = { - .platform_data = &wl1271_gpios, + .platform_data = &wilink_platform_data, }, }; @@ -117,6 +127,11 @@ static struct platform_device panda_abe_audio = { }, }; +static struct platform_device panda_hdmi_audio_codec = { + .name = "hdmi-audio-codec", + .id = -1, +}; + static struct platform_device btwilink_device = { .name = "btwilink", .id = -1, @@ -126,6 +141,7 @@ static struct platform_device *panda_devices[] __initdata = { &leds_gpio, &wl1271_device, &panda_abe_audio, + &panda_hdmi_audio_codec, &btwilink_device, }; @@ -274,7 +290,9 @@ static int __init omap4_panda_i2c_init(void) TWL_COMMON_REGULATOR_VANA | TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | - TWL_COMMON_REGULATOR_CLK32KG); + TWL_COMMON_REGULATOR_CLK32KG | + TWL_COMMON_REGULATOR_V1V8 | + TWL_COMMON_REGULATOR_V2V1); omap4_pmic_init("twl6030", &omap4_panda_twldata, &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index ae957c92081b..ff53deccecab 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -44,6 +44,7 @@ #include <linux/leds-lp5523.h> #include <../drivers/staging/iio/light/tsl2563.h> +#include <linux/lis3lv02d.h> #include "mux.h" #include "hsmmc.h" @@ -63,6 +64,9 @@ #define RX51_TSC2005_RESET_GPIO 104 #define RX51_TSC2005_IRQ_GPIO 100 +#define LIS302_IRQ1_GPIO 181 +#define LIS302_IRQ2_GPIO 180 /* Not yet in use */ + /* list all spi devices here */ enum { RX51_SPI_WL1251, @@ -73,6 +77,77 @@ enum { static struct wl12xx_platform_data wl1251_pdata; static struct tsc2005_platform_data tsc2005_pdata; +#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) +static int lis302_setup(void) +{ + int err; + int irq1 = LIS302_IRQ1_GPIO; + int irq2 = LIS302_IRQ2_GPIO; + + /* gpio for interrupt pin 1 */ + err = gpio_request(irq1, "lis3lv02dl_irq1"); + if (err) { + printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); + goto out; + } + + /* gpio for interrupt pin 2 */ + err = gpio_request(irq2, "lis3lv02dl_irq2"); + if (err) { + gpio_free(irq1); + printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); + goto out; + } + + gpio_direction_input(irq1); + gpio_direction_input(irq2); + +out: + return err; +} + +static int lis302_release(void) +{ + gpio_free(LIS302_IRQ1_GPIO); + gpio_free(LIS302_IRQ2_GPIO); + + return 0; +} + +static struct lis3lv02d_platform_data rx51_lis3lv02d_data = { + .click_flags = LIS3_CLICK_SINGLE_X | LIS3_CLICK_SINGLE_Y | + LIS3_CLICK_SINGLE_Z, + /* Limits are 0.5g * value */ + .click_thresh_x = 8, + .click_thresh_y = 8, + .click_thresh_z = 10, + /* Click must be longer than time limit */ + .click_time_limit = 9, + /* Kind of debounce filter */ + .click_latency = 50, + + /* Limits for all axis. millig-value / 18 to get HW values */ + .wakeup_flags = LIS3_WAKEUP_X_HI | LIS3_WAKEUP_Y_HI, + .wakeup_thresh = 800 / 18, + .wakeup_flags2 = LIS3_WAKEUP_Z_HI , + .wakeup_thresh2 = 900 / 18, + + .hipass_ctrl = LIS3_HIPASS1_DISABLE | LIS3_HIPASS2_DISABLE, + + /* Interrupt line 2 for click detection, line 1 for thresholds */ + .irq_cfg = LIS3_IRQ2_CLICK | LIS3_IRQ1_FF_WU_12, + + .axis_x = LIS3_DEV_X, + .axis_y = LIS3_INV_DEV_Y, + .axis_z = LIS3_INV_DEV_Z, + .setup_resources = lis302_setup, + .release_resources = lis302_release, + .st_min_limits = {-32, 3, 3}, + .st_max_limits = {-3, 32, 32}, + .irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO), +}; +#endif + #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) static struct tsl2563_platform_data rx51_tsl2563_platform_data = { .cover_comp_gain = 16, @@ -950,6 +1025,16 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { } }; +static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = { +#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) + { + I2C_BOARD_INFO("lis3lv02d", 0x1d), + .platform_data = &rx51_lis3lv02d_data, + .irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO), + }, +#endif +}; + static int __init rx51_i2c_init(void) { if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || @@ -971,7 +1056,8 @@ static int __init rx51_i2c_init(void) omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); - omap_register_i2c_bus(3, 400, NULL, 0); + omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3, + ARRAY_SIZE(rx51_peripherals_i2c_board_info_3)); return 0; } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 84fa55b4c8b9..ae62ece04ef9 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -354,6 +354,36 @@ static void __init omap_init_dmic(void) static inline void omap_init_dmic(void) {} #endif +#if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \ + defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE) + +static struct platform_device omap_hdmi_audio = { + .name = "omap-hdmi-audio", + .id = -1, +}; + +static void __init omap_init_hdmi_audio(void) +{ + struct omap_hwmod *oh; + struct platform_device *pdev; + + oh = omap_hwmod_lookup("dss_hdmi"); + if (!oh) { + printk(KERN_ERR "Could not look up dss_hdmi hw_mod\n"); + return; + } + + pdev = omap_device_build("omap-hdmi-audio-dai", + -1, oh, NULL, 0, NULL, 0, 0); + WARN(IS_ERR(pdev), + "Can't build omap_device for omap-hdmi-audio-dai.\n"); + + platform_device_register(&omap_hdmi_audio); +} +#else +static inline void omap_init_hdmi_audio(void) {} +#endif + #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) #include <plat/mcspi.h> @@ -701,6 +731,7 @@ static int __init omap2_init_devices(void) */ omap_init_audio(); omap_init_camera(); + omap_init_hdmi_audio(); omap_init_mbox(); /* If dtb is there, the devices will be created dynamically */ if (!of_have_populated_dt()) { diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index ee6596b45214..119d5a910f3a 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -266,6 +266,7 @@ static struct regulator_init_data omap4_vdac_idata = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, + .supply_regulator = "V2V1", }; static struct regulator_init_data omap4_vaux2_idata = { @@ -356,6 +357,7 @@ static struct regulator_init_data omap4_vcxio_idata = { }, .num_consumer_supplies = ARRAY_SIZE(omap4_vcxio_supply), .consumer_supplies = omap4_vcxio_supply, + .supply_regulator = "V2V1", }; static struct regulator_init_data omap4_vusb_idata = { @@ -439,6 +441,41 @@ static struct twl_regulator_driver_data omap4_vdd3_drvdata = { .set_voltage = twl_set_voltage, }; +static struct regulator_consumer_supply omap4_v1v8_supply[] = { + REGULATOR_SUPPLY("vio", "1-004b"), +}; + +static struct regulator_init_data omap4_v1v8_idata = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + .always_on = true, + }, + .num_consumer_supplies = ARRAY_SIZE(omap4_v1v8_supply), + .consumer_supplies = omap4_v1v8_supply, +}; + +static struct regulator_consumer_supply omap4_v2v1_supply[] = { + REGULATOR_SUPPLY("v2v1", "1-004b"), +}; + +static struct regulator_init_data omap4_v2v1_idata = { + .constraints = { + .min_uV = 2100000, + .max_uV = 2100000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(omap4_v2v1_supply), + .consumer_supplies = omap4_v2v1_supply, +}; + void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags) { @@ -497,5 +534,11 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, if (regulators_flags & TWL_COMMON_REGULATOR_CLK32KG && !pmic_data->clk32kg) pmic_data->clk32kg = &omap4_clk32kg_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_V1V8 && !pmic_data->v1v8) + pmic_data->v1v8 = &omap4_v1v8_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_V2V1 && !pmic_data->v2v1) + pmic_data->v2v1 = &omap4_v2v1_idata; } #endif /* CONFIG_ARCH_OMAP4 */ diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 09627483a57f..8fe71cfd002c 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -22,6 +22,8 @@ #define TWL_COMMON_REGULATOR_VCXIO (1 << 8) #define TWL_COMMON_REGULATOR_VUSB (1 << 9) #define TWL_COMMON_REGULATOR_CLK32KG (1 << 10) +#define TWL_COMMON_REGULATOR_V1V8 (1 << 11) +#define TWL_COMMON_REGULATOR_V2V1 (1 << 12) /* TWL4030 LDO regulators */ #define TWL_COMMON_REGULATOR_VPLL1 (1 << 4) diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 8c06ccac44c2..d470864b4e42 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -252,27 +252,6 @@ error_fail: * GPIO LEDs (simple - doesn't use hardware blinking support) */ -#define ORION_BLINK_HALF_PERIOD 100 /* ms */ - -static int dns323_gpio_blink_set(unsigned gpio, int state, - unsigned long *delay_on, unsigned long *delay_off) -{ - - if (delay_on && delay_off && !*delay_on && !*delay_off) - *delay_on = *delay_off = ORION_BLINK_HALF_PERIOD; - - switch(state) { - case GPIO_LED_NO_BLINK_LOW: - case GPIO_LED_NO_BLINK_HIGH: - orion_gpio_set_blink(gpio, 0); - gpio_set_value(gpio, state); - break; - case GPIO_LED_BLINK: - orion_gpio_set_blink(gpio, 1); - } - return 0; -} - static struct gpio_led dns323ab_leds[] = { { .name = "power:blue", @@ -311,13 +290,13 @@ static struct gpio_led dns323c_leds[] = { static struct gpio_led_platform_data dns323ab_led_data = { .num_leds = ARRAY_SIZE(dns323ab_leds), .leds = dns323ab_leds, - .gpio_blink_set = dns323_gpio_blink_set, + .gpio_blink_set = orion_gpio_led_blink_set, }; static struct gpio_led_platform_data dns323c_led_data = { .num_leds = ARRAY_SIZE(dns323c_leds), .leds = dns323c_leds, - .gpio_blink_set = dns323_gpio_blink_set, + .gpio_blink_set = orion_gpio_led_blink_set, }; static struct platform_device dns323_gpio_leds = { diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index c35456f02acb..56e8cebeb7d5 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -732,9 +732,7 @@ static inline void balloon3_nand_init(void) {} #if defined(CONFIG_REGULATOR_MAX1586) || \ defined(CONFIG_REGULATOR_MAX1586_MODULE) static struct regulator_consumer_supply balloon3_max1587a_consumers[] = { - { - .supply = "vcc_core", - } + REGULATOR_SUPPLY("vcc_core", NULL), }; static struct regulator_init_data balloon3_max1587a_v3_info = { diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 313274016277..3e4e9fe2d462 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -713,9 +713,7 @@ struct da9030_battery_info cm_x300_battery_info = { }; static struct regulator_consumer_supply buck2_consumers[] = { - { - .supply = "vcc_core", - }, + REGULATOR_SUPPLY("vcc_core", NULL), }; static struct regulator_init_data buck2_data = { diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 16ec557b8e43..a3a4a38d4972 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -1085,10 +1085,7 @@ static void __init em_x270_userspace_consumers_init(void) /* DA9030 related initializations */ #define REGULATOR_CONSUMER(_name, _dev_name, _supply) \ static struct regulator_consumer_supply _name##_consumers[] = { \ - { \ - .dev_name = _dev_name, \ - .supply = _supply, \ - }, \ + REGULATOR_SUPPLY(_supply, _dev_name), \ } REGULATOR_CONSUMER(ldo3, "reg-userspace-consumer.0", "vcc gps"); diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index b83b95a29503..d09da6a746b8 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -22,6 +22,7 @@ #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/input.h> +#include <linux/input/navpoint.h> #include <linux/lcd.h> #include <linux/mfd/htc-egpio.h> #include <linux/mfd/asic3.h> @@ -102,6 +103,10 @@ static unsigned long hx4700_pin_config[] __initdata = { GPIO44_BTUART_CTS, GPIO45_BTUART_RTS_LPM_LOW, + /* STUART (IRDA) */ + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, + /* PWM 1 (Backlight) */ GPIO17_PWM1_OUT, @@ -113,7 +118,7 @@ static unsigned long hx4700_pin_config[] __initdata = { GPIO113_I2S_SYSCLK, /* SSP 1 (NavPoint) */ - GPIO23_SSP1_SCLK, + GPIO23_SSP1_SCLK_IN, GPIO24_SSP1_SFRM, GPIO25_SSP1_TXD, GPIO26_SSP1_RXD, @@ -125,10 +130,13 @@ static unsigned long hx4700_pin_config[] __initdata = { GPIO88_GPIO, /* HX4700 specific input GPIOs */ - GPIO12_GPIO, /* ASIC3_IRQ */ + GPIO12_GPIO | WAKEUP_ON_EDGE_RISE, /* ASIC3_IRQ */ GPIO13_GPIO, /* W3220_IRQ */ GPIO14_GPIO, /* nWLAN_IRQ */ + /* HX4700 specific output GPIOs */ + GPIO102_GPIO | MFP_LPM_DRIVE_LOW, /* SYNAPTICS_POWER_ON */ + GPIO10_GPIO, /* GSM_IRQ */ GPIO13_GPIO, /* CPLD_IRQ */ GPIO107_GPIO, /* DS1WM_IRQ */ @@ -183,6 +191,23 @@ static struct platform_device gpio_keys = { }; /* + * Synaptics NavPoint connected to SSP1 + */ + +static struct navpoint_platform_data navpoint_platform_data = { + .port = 1, + .gpio = GPIO102_HX4700_SYNAPTICS_POWER_ON, +}; + +static struct platform_device navpoint = { + .name = "navpoint", + .id = -1, + .dev = { + .platform_data = &navpoint_platform_data, + }, +}; + +/* * ASIC3 */ @@ -227,7 +252,6 @@ static u16 asic3_gpio_config[] = { ASIC3_GPIOC0_LED0, /* red */ ASIC3_GPIOC1_LED1, /* green */ ASIC3_GPIOC2_LED2, /* blue */ - ASIC3_GPIOC4_CF_nCD, ASIC3_GPIOC5_nCIOW, ASIC3_GPIOC6_nCIOR, ASIC3_GPIOC7_nPCE_1, @@ -241,6 +265,7 @@ static u16 asic3_gpio_config[] = { ASIC3_GPIOC15_nPIOR, /* GPIOD: input GPIOs, CF */ + ASIC3_GPIOD4_CF_nCD, ASIC3_GPIOD11_nCIOIS16, ASIC3_GPIOD12_nCWAIT, ASIC3_GPIOD15_nPIOW, @@ -291,6 +316,7 @@ static struct asic3_platform_data asic3_platform_data = { .gpio_config_num = ARRAY_SIZE(asic3_gpio_config), .irq_base = IRQ_BOARD_START, .gpio_base = HX4700_ASIC3_GPIO_BASE, + .clock_rate = 4000000, .leds = asic3_leds, }; @@ -680,12 +706,8 @@ static struct platform_device power_supply = { */ static struct regulator_consumer_supply bq24022_consumers[] = { - { - .supply = "vbus_draw", - }, - { - .supply = "ac_draw", - }, + REGULATOR_SUPPLY("vbus_draw", NULL), + REGULATOR_SUPPLY("ac_draw", NULL), }; static struct regulator_init_data bq24022_init_data = { @@ -764,9 +786,8 @@ static struct platform_device strataflash = { * Maxim MAX1587A on PI2C */ -static struct regulator_consumer_supply max1587a_consumer = { - .supply = "vcc_core", -}; +static struct regulator_consumer_supply max1587a_consumer = + REGULATOR_SUPPLY("vcc_core", NULL); static struct regulator_init_data max1587a_v3_info = { .constraints = { @@ -828,6 +849,7 @@ static struct platform_device audio = { static struct platform_device *devices[] __initdata = { &asic3, &gpio_keys, + &navpoint, &backlight, &w3220, &hx4700_lcd, @@ -859,6 +881,7 @@ static void __init hx4700_init(void) int ret; pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config)); + gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1); ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios)); if (ret) pr_err ("hx4700: Failed to request GPIOs.\n"); diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h index a65867209aa0..a611ad3153c7 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h @@ -208,6 +208,7 @@ #define GPIO113_I2S_SYSCLK MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW) /* SSP 1 */ +#define GPIO23_SSP1_SCLK_IN MFP_CFG_IN(GPIO23, AF2) #define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW) #define GPIO29_SSP1_SCLK MFP_CFG_IN(GPIO29, AF3) #define GPIO27_SSP1_SYSCLK MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW) diff --git a/arch/arm/mach-pxa/include/mach/mioa701.h b/arch/arm/mach-pxa/include/mach/mioa701.h index 02868447b0b1..e57f5c724e8a 100644 --- a/arch/arm/mach-pxa/include/mach/mioa701.h +++ b/arch/arm/mach-pxa/include/mach/mioa701.h @@ -61,6 +61,9 @@ #define GPIO93_KEY_VOLUME_UP 93 #define GPIO94_KEY_VOLUME_DOWN 94 +/* Camera */ +#define GPIO56_MT9M111_nOE 56 + extern struct input_dev *mioa701_evdev; extern void mioa701_gpio_lpm_set(unsigned long mfp_pin); diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h index d72791695b26..0260aaa2fc17 100644 --- a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h +++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h @@ -31,7 +31,6 @@ #define PCM990_CTRL_INT_IRQ PXA_GPIO_TO_IRQ(PCM990_CTRL_INT_IRQ_GPIO) #define PCM990_CTRL_INT_IRQ_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */ -#define PCM990_CTRL_BASE 0xea000000 #define PCM990_CTRL_SIZE (1*1024*1024) #define PCM990_CTRL_PWR_IRQ_GPIO 14 @@ -69,13 +68,13 @@ #define PCM990_CTRL_MMC2DE 0x0004 /* R MMC2 Card detect */ #define PCM990_CTRL_MMC2WP 0x0008 /* R MMC2 Card write protect */ -#define PCM990_CTRL_REG6 0x000C /* Interrupt Clear REGISTER */ +#define PCM990_CTRL_INTSETCLR 0x000C /* Interrupt Clear REGISTER */ #define PCM990_CTRL_INTC0 0x0001 /* Clear Reg BT Detect */ #define PCM990_CTRL_INTC1 0x0002 /* Clear Reg FR RI */ #define PCM990_CTRL_INTC2 0x0004 /* Clear Reg MMC1 Detect */ #define PCM990_CTRL_INTC3 0x0008 /* Clear Reg PM_5V off */ -#define PCM990_CTRL_REG7 0x000E /* Interrupt Enable REGISTER */ +#define PCM990_CTRL_INTMSKENA 0x000E /* Interrupt Enable REGISTER */ #define PCM990_CTRL_ENAINT0 0x0001 /* Enable Int BT Detect */ #define PCM990_CTRL_ENAINT1 0x0002 /* Enable Int FR RI */ #define PCM990_CTRL_ENAINT2 0x0004 /* Enable Int MMC1 Detect */ @@ -102,32 +101,6 @@ #define PCM990_CTRL_ACPRES 0x0004 /* DC Present */ #define PCM990_CTRL_ACALARM 0x0008 /* Error Akku */ -#define PCM990_CTRL_P2V(x) ((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE) -#define PCM990_CTRL_V2P(x) ((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS) - -#ifndef __ASSEMBLY__ -# define __PCM990_CTRL_REG(x) \ - (*((volatile unsigned char *)PCM990_CTRL_P2V(x))) -#else -# define __PCM990_CTRL_REG(x) PCM990_CTRL_P2V(x) -#endif - -#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7) -#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6) -#define PCM990_CTRL0 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0) -#define PCM990_CTRL1 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1) -#define PCM990_CTRL2 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2) -#define PCM990_CTRL3 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) -#define PCM990_CTRL4 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4) -#define PCM990_CTRL5 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) -#define PCM990_CTRL6 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6) -#define PCM990_CTRL7 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7) -#define PCM990_CTRL8 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8) -#define PCM990_CTRL9 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9) -#define PCM990_CTRL10 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10) -#define PCM990_CTRL11 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11) - - /* * IDE */ @@ -166,24 +139,6 @@ #define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE) #define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS) -#ifndef __ASSEMBLY__ -# define __PCM990_IDE_PLD_REG(x) \ - (*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x))) -#else -# define __PCM990_IDE_PLD_REG(x) PCM990_IDE_PLD_P2V(x) -#endif - -#define PCM990_IDE0 \ - __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0) -#define PCM990_IDE1 \ - __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1) -#define PCM990_IDE2 \ - __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2) -#define PCM990_IDE3 \ - __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3) -#define PCM990_IDE4 \ - __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4) - /* * Compact Flash */ @@ -196,10 +151,6 @@ #define PCM990_CF_CD_EDGE IRQ_TYPE_EDGE_RISING #define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */ -#define PCM990_CF_PLD_BASE 0xef000000 -#define PCM990_CF_PLD_SIZE (1*1024*1024) -#define PCM990_CF_PLD_P2V(x) ((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE) -#define PCM990_CF_PLD_V2P(x) ((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS) /* visible CPLD (U6) registers */ #define PCM990_CF_PLD_REG0 0x1000 /* OFFSET CF REGISTER 0 */ @@ -239,21 +190,6 @@ #define PCM990_CF_REG6_CD1 0x0001 /* R CF Card_Detect1 */ #define PCM990_CF_REG6_CD2 0x0002 /* R CF Card_Detect2 */ -#ifndef __ASSEMBLY__ -# define __PCM990_CF_PLD_REG(x) \ - (*((volatile unsigned char *)PCM990_CF_PLD_P2V(x))) -#else -# define __PCM990_CF_PLD_REG(x) PCM990_CF_PLD_P2V(x) -#endif - -#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0) -#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1) -#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2) -#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3) -#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4) -#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5) -#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6) - /* * Wolfson AC97 Touch */ diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 8de0651d7efb..2db697cd2b4e 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -579,12 +579,8 @@ static struct platform_device power_supply = { */ static struct regulator_consumer_supply bq24022_consumers[] = { - { - .supply = "vbus_draw", - }, - { - .supply = "ac_draw", - }, + REGULATOR_SUPPLY("vbus_draw", NULL), + REGULATOR_SUPPLY("ac_draw", NULL), }; static struct regulator_init_data bq24022_init_data = { diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 061d57009cee..bf99022b021f 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -103,6 +103,7 @@ static unsigned long mioa701_pin_config[] = { GPIO82_CIF_DD_5, GPIO84_CIF_FV, GPIO85_CIF_LV, + MIO_CFG_OUT(GPIO56_MT9M111_nOE, AF0, DRIVE_LOW), /* Bluetooth */ MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0), @@ -581,9 +582,7 @@ static struct wm97xx_pdata mioa701_wm97xx_pdata = { * Voltage regulation */ static struct regulator_consumer_supply max1586_consumers[] = { - { - .supply = "vcc_core", - } + REGULATOR_SUPPLY("vcc_core", NULL), }; static struct regulator_init_data max1586_v3_info = { @@ -705,6 +704,7 @@ static struct gpio global_gpios[] = { { GPIO9_CHARGE_EN, GPIOF_OUT_INIT_HIGH, "Charger enable" }, { GPIO18_POWEROFF, GPIOF_OUT_INIT_LOW, "Power Off" }, { GPIO87_LCD_POWER, GPIOF_OUT_INIT_LOW, "LCD Power" }, + { GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" }, }; static void __init mioa701_machine_init(void) diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index fbc10d7b95d1..dad71cfa34c8 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -429,9 +429,7 @@ void __init palm27x_power_init(int ac, int usb) #if defined(CONFIG_REGULATOR_MAX1586) || \ defined(CONFIG_REGULATOR_MAX1586_MODULE) static struct regulator_consumer_supply palm27x_max1587a_consumers[] = { - { - .supply = "vcc_core", - } + REGULATOR_SUPPLY("vcc_core", NULL), }; static struct regulator_init_data palm27x_max1587a_v3_info = { diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index abab4e2b122c..cb723e84bc27 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -65,6 +65,18 @@ static unsigned long pcm990_pin_config[] __initdata = { GPIO31_AC97_SYNC, }; +static void __iomem *pcm990_cpld_base; + +static u8 pcm990_cpld_readb(unsigned int reg) +{ + return readb(pcm990_cpld_base + reg); +} + +static void pcm990_cpld_writeb(u8 value, unsigned int reg) +{ + writeb(value, pcm990_cpld_base + reg); +} + /* * pcm990_lcd_power - control power supply to the LCD * @on: 0 = switch off, 1 = switch on @@ -78,13 +90,13 @@ static void pcm990_lcd_power(int on, struct fb_var_screeninfo *var) /* enable LCD-Latches * power on LCD */ - __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) = - PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON; + pcm990_cpld_writeb(PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON, + PCM990_CTRL_REG3); } else { /* disable LCD-Latches * power off LCD */ - __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) = 0x00; + pcm990_cpld_writeb(0, PCM990_CTRL_REG3); } } #endif @@ -243,15 +255,26 @@ static unsigned long pcm990_irq_enabled; static void pcm990_mask_ack_irq(struct irq_data *d) { int pcm990_irq = (d->irq - PCM027_IRQ(0)); - PCM990_INTMSKENA = (pcm990_irq_enabled &= ~(1 << pcm990_irq)); + + pcm990_irq_enabled &= ~(1 << pcm990_irq); + + pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA); } static void pcm990_unmask_irq(struct irq_data *d) { int pcm990_irq = (d->irq - PCM027_IRQ(0)); + u8 val; + /* the irq can be acknowledged only if deasserted, so it's done here */ - PCM990_INTSETCLR |= 1 << pcm990_irq; - PCM990_INTMSKENA = (pcm990_irq_enabled |= (1 << pcm990_irq)); + + pcm990_irq_enabled |= (1 << pcm990_irq); + + val = pcm990_cpld_readb(PCM990_CTRL_INTSETCLR); + val |= 1 << pcm990_irq; + pcm990_cpld_writeb(val, PCM990_CTRL_INTSETCLR); + + pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA); } static struct irq_chip pcm990_irq_chip = { @@ -261,7 +284,10 @@ static struct irq_chip pcm990_irq_chip = { static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc) { - unsigned long pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled; + unsigned long pending; + + pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR); + pending &= pcm990_irq_enabled; do { /* clear our parent IRQ */ @@ -270,7 +296,8 @@ static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc) irq = PCM027_IRQ(0) + __ffs(pending); generic_handle_irq(irq); } - pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled; + pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR); + pending &= pcm990_irq_enabled; } while (pending); } @@ -285,8 +312,9 @@ static void __init pcm990_init_irq(void) set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } - PCM990_INTMSKENA = 0x00; /* disable all Interrupts */ - PCM990_INTSETCLR = 0xFF; + /* disable all Interrupts */ + pcm990_cpld_writeb(0x0, PCM990_CTRL_INTMSKENA); + pcm990_cpld_writeb(0xff, PCM990_CTRL_INTSETCLR); irq_set_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler); irq_set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE); @@ -309,13 +337,16 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int, static void pcm990_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data *p_d = dev->platform_data; + u8 val; + + val = pcm990_cpld_readb(PCM990_CTRL_REG5); if ((1 << vdd) & p_d->ocr_mask) - __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) = - PCM990_CTRL_MMC2PWR; + val |= PCM990_CTRL_MMC2PWR; else - __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) = - ~PCM990_CTRL_MMC2PWR; + val &= ~PCM990_CTRL_MMC2PWR; + + pcm990_cpld_writeb(PCM990_CTRL_MMC2PWR, PCM990_CTRL_REG5); } static void pcm990_mci_exit(struct device *dev, void *data) @@ -481,23 +512,6 @@ static struct platform_device pcm990_camera[] = { #endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */ /* - * enable generic access to the base board control CPLDs U6 and U7 - */ -static struct map_desc pcm990_io_desc[] __initdata = { - { - .virtual = PCM990_CTRL_BASE, - .pfn = __phys_to_pfn(PCM990_CTRL_PHYS), - .length = PCM990_CTRL_SIZE, - .type = MT_DEVICE /* CPLD */ - }, { - .virtual = PCM990_CF_PLD_BASE, - .pfn = __phys_to_pfn(PCM990_CF_PLD_PHYS), - .length = PCM990_CF_PLD_SIZE, - .type = MT_DEVICE /* CPLD */ - } -}; - -/* * system init for baseboard usage. Will be called by pcm027 init. * * Add platform devices present on this baseboard and init @@ -507,8 +521,11 @@ void __init pcm990_baseboard_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config)); - /* register CPLD access */ - iotable_init(ARRAY_AND_SIZE(pcm990_io_desc)); + pcm990_cpld_base = ioremap(PCM990_CTRL_PHYS, PCM990_CTRL_SIZE); + if (!pcm990_cpld_base) { + pr_err("pcm990: failed to ioremap cpld\n"); + return; + } /* register CPLD's IRQ controller */ pcm990_init_irq(); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index df2ab0fb2ace..363d91b44ecb 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -877,9 +877,7 @@ static struct i2c_board_info spitz_i2c_devs[] = { }; static struct regulator_consumer_supply isl6271a_consumers[] = { - { - .supply = "vcc_core", - } + REGULATOR_SUPPLY("vcc_core", NULL), }; static struct regulator_init_data isl6271a_info[] = { diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 4cd645e29b64..30b1b0b3c7f7 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -151,10 +151,7 @@ static struct platform_device sht15 = { }; static struct regulator_consumer_supply stargate2_sensor_3_con[] = { - { - .dev_name = "sht15", - .supply = "vcc", - }, + REGULATOR_SUPPLY("vcc", "sht15"), }; enum stargate2_ldos{ diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index c57ab636ea9c..e1740acd15f1 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -640,9 +640,7 @@ static inline void vpac270_ide_init(void) {} #if defined(CONFIG_REGULATOR_MAX1586) || \ defined(CONFIG_REGULATOR_MAX1586_MODULE) static struct regulator_consumer_supply vpac270_max1587a_consumers[] = { - { - .supply = "vcc_core", - } + REGULATOR_SUPPLY("vcc_core", NULL), }; static struct regulator_init_data vpac270_max1587a_v3_info = { diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index fa8619970841..b9320cb8a11f 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -615,9 +615,7 @@ static inline void z2_spi_init(void) {} #if defined(CONFIG_REGULATOR_TPS65023) || \ defined(CONFIG_REGULATOR_TPS65023_MODULE) static struct regulator_consumer_supply z2_tps65021_consumers[] = { - { - .supply = "vcc_core", - } + REGULATOR_SUPPLY("vcc_core", NULL), }; static struct regulator_init_data z2_tps65021_info[] = { diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 164467cbb7ea..0569765a8e90 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -290,6 +290,24 @@ static struct regulator_consumer_supply wallvdd_consumers[] = { REGULATOR_SUPPLY("SPKVDD2", "1-001a"), REGULATOR_SUPPLY("SPKVDDL", "1-001a"), REGULATOR_SUPPLY("SPKVDDR", "1-001a"), + + REGULATOR_SUPPLY("DC1VDD", "0-0034"), + REGULATOR_SUPPLY("DC2VDD", "0-0034"), + REGULATOR_SUPPLY("DC3VDD", "0-0034"), + REGULATOR_SUPPLY("LDO1VDD", "0-0034"), + REGULATOR_SUPPLY("LDO2VDD", "0-0034"), + REGULATOR_SUPPLY("LDO4VDD", "0-0034"), + REGULATOR_SUPPLY("LDO5VDD", "0-0034"), + REGULATOR_SUPPLY("LDO6VDD", "0-0034"), + REGULATOR_SUPPLY("LDO7VDD", "0-0034"), + REGULATOR_SUPPLY("LDO8VDD", "0-0034"), + REGULATOR_SUPPLY("LDO9VDD", "0-0034"), + REGULATOR_SUPPLY("LDO10VDD", "0-0034"), + REGULATOR_SUPPLY("LDO11VDD", "0-0034"), + + REGULATOR_SUPPLY("DC1VDD", "1-0034"), + REGULATOR_SUPPLY("DC2VDD", "1-0034"), + REGULATOR_SUPPLY("DC3VDD", "1-0034"), }; static struct regulator_init_data wallvdd_data = { diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 7dcf08ee979d..98327b7a503c 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -99,6 +99,12 @@ config MACH_BONITO select ARCH_REQUIRE_GPIOLIB depends on ARCH_R8A7740 +config MACH_ARMADILLO800EVA + bool "Armadillo-800 EVA board" + depends on ARCH_R8A7740 + select ARCH_REQUIRE_GPIOLIB + select USE_OF + config MACH_MARZEN bool "MARZEN board" depends on ARCH_R8A7779 @@ -109,6 +115,12 @@ config MACH_KZM9D depends on ARCH_EMEV2 select USE_OF +config MACH_KZM9G + bool "KZM-A9-GT board" + depends on ARCH_SH73A0 + select ARCH_REQUIRE_GPIOLIB + select USE_OF + comment "SH-Mobile System Configuration" config CPU_HAS_INTEVT @@ -121,7 +133,8 @@ config MEMORY_START hex "Physical memory start address" default "0x50000000" if MACH_G3EVM default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \ - MACH_MACKEREL || MACH_BONITO + MACH_MACKEREL || MACH_BONITO || \ + MACH_ARMADILLO800EVA default "0x41000000" if MACH_KOTA2 default "0x00000000" ---help--- @@ -133,7 +146,8 @@ config MEMORY_SIZE hex "Physical memory size" default "0x08000000" if MACH_G3EVM default "0x08000000" if MACH_G4EVM - default "0x20000000" if MACH_AG5EVM || MACH_BONITO + default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \ + MACH_ARMADILLO800EVA default "0x1e000000" if MACH_KOTA2 default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL default "0x04000000" diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index c795335931c9..e6b177bc9410 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -51,7 +51,9 @@ obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o obj-$(CONFIG_MACH_KOTA2) += board-kota2.o obj-$(CONFIG_MACH_BONITO) += board-bonito.o obj-$(CONFIG_MACH_MARZEN) += board-marzen.o +obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o +obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o # Framework support obj-$(CONFIG_SMP) += $(smp-y) diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index b56dde2732bb..0c3caeba2f3e 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -997,6 +997,8 @@ static struct sh_mobile_ceu_companion csi2 = { static struct sh_mobile_ceu_info sh_mobile_ceu_info = { .flags = SH_CEU_FLAG_USE_8BIT_BUS, + .max_width = 8188, + .max_height = 8188, .csi2 = &csi2, }; diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c new file mode 100644 index 000000000000..9e37026ef9dd --- /dev/null +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -0,0 +1,784 @@ +/* + * armadillo 800 eva board support + * + * Copyright (C) 2012 Renesas Solutions Corp. + * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/input.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/sh_eth.h> +#include <linux/videodev2.h> +#include <linux/usb/renesas_usbhs.h> +#include <linux/mfd/tmio.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sh_mmcif.h> +#include <linux/mmc/sh_mobile_sdhi.h> +#include <mach/common.h> +#include <mach/irqs.h> +#include <asm/page.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <asm/hardware/cache-l2x0.h> +#include <mach/r8a7740.h> +#include <video/sh_mobile_lcdc.h> + +/* + * CON1 Camera Module + * CON2 Extension Bus + * CON3 HDMI Output + * CON4 Composite Video Output + * CON5 H-UDI JTAG + * CON6 ARM JTAG + * CON7 SD1 + * CON8 SD2 + * CON9 RTC BackUp + * CON10 Monaural Mic Input + * CON11 Stereo Headphone Output + * CON12 Audio Line Output(L) + * CON13 Audio Line Output(R) + * CON14 AWL13 Module + * CON15 Extension + * CON16 LCD1 + * CON17 LCD2 + * CON19 Power Input + * CON20 USB1 + * CON21 USB2 + * CON22 Serial + * CON23 LAN + * CON24 USB3 + * LED1 Camera LED(Yellow) + * LED2 Power LED (Green) + * ED3-LED6 User LED(Yellow) + * LED7 LAN link LED(Green) + * LED8 LAN activity LED(Yellow) + */ + +/* + * DipSwitch + * + * SW1 + * + * -12345678-+---------------+---------------------------- + * 1 | boot | hermit + * 0 | boot | OS auto boot + * -12345678-+---------------+---------------------------- + * 00 | boot device | eMMC + * 10 | boot device | SDHI0 (CON7) + * 01 | boot device | - + * 11 | boot device | Extension Buss (CS0) + * -12345678-+---------------+---------------------------- + * 0 | Extension Bus | D8-D15 disable, eMMC enable + * 1 | Extension Bus | D8-D15 enable, eMMC disable + * -12345678-+---------------+---------------------------- + * 0 | SDHI1 | COM8 disable, COM14 enable + * 1 | SDHI1 | COM8 enable, COM14 disable + * -12345678-+---------------+---------------------------- + * 0 | USB0 | COM20 enable, COM24 disable + * 1 | USB0 | COM20 disable, COM24 enable + * -12345678-+---------------+---------------------------- + * 00 | JTAG | SH-X2 + * 10 | JTAG | ARM + * 01 | JTAG | - + * 11 | JTAG | Boundary Scan + *-----------+---------------+---------------------------- + */ + +/* + * USB function + * + * When you use USB Function, + * set SW1.6 ON, and connect cable to CN24. + * + * USBF needs workaround on R8A7740 chip. + * These are a little bit complex. + * see + * usbhsf_power_ctrl() + * + * CAUTION + * + * It uses autonomy mode for USB hotplug at this point + * (= usbhs_private.platform_callback.get_vbus is NULL), + * since we don't know what's happen on PM control + * on this workaround. + */ +#define USBCR1 0xe605810a +#define USBH 0xC6700000 +#define USBH_USBCTR 0x10834 + +struct usbhsf_private { + struct clk *phy; + struct clk *usb24; + struct clk *pci; + struct clk *func; + struct clk *host; + void __iomem *usbh_base; + struct renesas_usbhs_platform_info info; +}; + +#define usbhsf_get_priv(pdev) \ + container_of(renesas_usbhs_get_info(pdev), \ + struct usbhsf_private, info) + +static int usbhsf_get_id(struct platform_device *pdev) +{ + return USBHS_GADGET; +} + +static void usbhsf_power_ctrl(struct platform_device *pdev, + void __iomem *base, int enable) +{ + struct usbhsf_private *priv = usbhsf_get_priv(pdev); + + /* + * Work around for USB Function. + * It needs USB host clock, and settings + */ + if (enable) { + /* + * enable all the related usb clocks + * for usb workaround + */ + clk_enable(priv->usb24); + clk_enable(priv->pci); + clk_enable(priv->host); + clk_enable(priv->func); + clk_enable(priv->phy); + + /* + * set USBCR1 + * + * Port1 is driven by USB function, + * Port2 is driven by USB HOST + * One HOST (Port1 or Port2 is HOST) + * USB PLL input clock = 24MHz + */ + __raw_writew(0xd750, USBCR1); + mdelay(1); + + /* + * start USB Host + */ + __raw_writel(0x0000000c, priv->usbh_base + USBH_USBCTR); + __raw_writel(0x00000008, priv->usbh_base + USBH_USBCTR); + mdelay(10); + + /* + * USB PHY Power ON + */ + __raw_writew(0xd770, USBCR1); + __raw_writew(0x4000, base + 0x102); /* USBF :: SUSPMODE */ + + } else { + __raw_writel(0x0000010f, priv->usbh_base + USBH_USBCTR); + __raw_writew(0xd7c0, USBCR1); /* GPIO */ + + clk_disable(priv->phy); + clk_disable(priv->func); /* usb work around */ + clk_disable(priv->host); /* usb work around */ + clk_disable(priv->pci); /* usb work around */ + clk_disable(priv->usb24); /* usb work around */ + } +} + +static void usbhsf_hardware_exit(struct platform_device *pdev) +{ + struct usbhsf_private *priv = usbhsf_get_priv(pdev); + + if (!IS_ERR(priv->phy)) + clk_put(priv->phy); + if (!IS_ERR(priv->usb24)) + clk_put(priv->usb24); + if (!IS_ERR(priv->pci)) + clk_put(priv->pci); + if (!IS_ERR(priv->host)) + clk_put(priv->host); + if (!IS_ERR(priv->func)) + clk_put(priv->func); + if (priv->usbh_base) + iounmap(priv->usbh_base); + + priv->phy = NULL; + priv->usb24 = NULL; + priv->pci = NULL; + priv->host = NULL; + priv->func = NULL; + priv->usbh_base = NULL; +} + +static int usbhsf_hardware_init(struct platform_device *pdev) +{ + struct usbhsf_private *priv = usbhsf_get_priv(pdev); + + priv->phy = clk_get(&pdev->dev, "phy"); + priv->usb24 = clk_get(&pdev->dev, "usb24"); + priv->pci = clk_get(&pdev->dev, "pci"); + priv->func = clk_get(&pdev->dev, "func"); + priv->host = clk_get(&pdev->dev, "host"); + priv->usbh_base = ioremap_nocache(USBH, 0x20000); + + if (IS_ERR(priv->phy) || + IS_ERR(priv->usb24) || + IS_ERR(priv->pci) || + IS_ERR(priv->host) || + IS_ERR(priv->func) || + !priv->usbh_base) { + dev_err(&pdev->dev, "USB clock setting failed\n"); + usbhsf_hardware_exit(pdev); + return -EIO; + } + + /* usb24 use 1/1 of parent clock (= usb24s = 24MHz) */ + clk_set_rate(priv->usb24, + clk_get_rate(clk_get_parent(priv->usb24))); + + return 0; +} + +static struct usbhsf_private usbhsf_private = { + .info = { + .platform_callback = { + .get_id = usbhsf_get_id, + .hardware_init = usbhsf_hardware_init, + .hardware_exit = usbhsf_hardware_exit, + .power_ctrl = usbhsf_power_ctrl, + }, + .driver_param = { + .buswait_bwait = 5, + .detection_delay = 5, + }, + } +}; + +static struct resource usbhsf_resources[] = { + { + .name = "USBHS", + .start = 0xe6890000, + .end = 0xe6890104 - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = evt2irq(0x0A20), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usbhsf_device = { + .name = "renesas_usbhs", + .dev = { + .platform_data = &usbhsf_private.info, + }, + .id = -1, + .num_resources = ARRAY_SIZE(usbhsf_resources), + .resource = usbhsf_resources, +}; + +/* Ether */ +static struct sh_eth_plat_data sh_eth_platdata = { + .phy = 0x00, /* LAN8710A */ + .edmac_endian = EDMAC_LITTLE_ENDIAN, + .register_type = SH_ETH_REG_GIGABIT, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct resource sh_eth_resources[] = { + { + .start = 0xe9a00000, + .end = 0xe9a00800 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = 0xe9a01800, + .end = 0xe9a02000 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = evt2irq(0x0500), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh_eth_device = { + .name = "sh-eth", + .id = -1, + .dev = { + .platform_data = &sh_eth_platdata, + }, + .resource = sh_eth_resources, + .num_resources = ARRAY_SIZE(sh_eth_resources), +}; + +/* LCDC */ +static struct fb_videomode lcdc0_mode = { + .name = "AMPIER/AM-800480", + .xres = 800, + .yres = 480, + .left_margin = 88, + .right_margin = 40, + .hsync_len = 128, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + .sync = 0, +}; + +static struct sh_mobile_lcdc_info lcdc0_info = { + .clock_source = LCDC_CLK_BUS, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .fourcc = V4L2_PIX_FMT_RGB565, + .interface_type = RGB24, + .clock_divider = 5, + .flags = 0, + .lcd_modes = &lcdc0_mode, + .num_modes = 1, + .panel_cfg = { + .width = 111, + .height = 68, + }, + }, +}; + +static struct resource lcdc0_resources[] = { + [0] = { + .name = "LCD0", + .start = 0xfe940000, + .end = 0xfe943fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x580), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device lcdc0_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc0_resources), + .resource = lcdc0_resources, + .id = 0, + .dev = { + .platform_data = &lcdc0_info, + .coherent_dma_mask = ~0, + }, +}; + +/* GPIO KEY */ +#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 } + +static struct gpio_keys_button gpio_buttons[] = { + GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW1"), + GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW2"), + GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW3"), + GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW4"), +}; + +static struct gpio_keys_platform_data gpio_key_info = { + .buttons = gpio_buttons, + .nbuttons = ARRAY_SIZE(gpio_buttons), +}; + +static struct platform_device gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &gpio_key_info, + }, +}; + +/* SDHI0 */ +/* + * FIXME + * + * It use polling mode here, since + * CD (= Card Detect) pin is not connected to SDHI0_CD. + * We can use IRQ31 as card detect irq, + * but it needs chattering removal operation + */ +#define IRQ31 evt2irq(0x33E0) +static struct sh_mobile_sdhi_info sdhi0_info = { + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |\ + MMC_CAP_NEEDS_POLL, + .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, +}; + +static struct resource sdhi0_resources[] = { + { + .name = "SDHI0", + .start = 0xe6850000, + .end = 0xe6850100 - 1, + .flags = IORESOURCE_MEM, + }, + /* + * no SH_MOBILE_SDHI_IRQ_CARD_DETECT here + */ + { + .name = SH_MOBILE_SDHI_IRQ_SDCARD, + .start = evt2irq(0x0E20), + .flags = IORESOURCE_IRQ, + }, + { + .name = SH_MOBILE_SDHI_IRQ_SDIO, + .start = evt2irq(0x0E40), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi0_device = { + .name = "sh_mobile_sdhi", + .id = 0, + .dev = { + .platform_data = &sdhi0_info, + }, + .num_resources = ARRAY_SIZE(sdhi0_resources), + .resource = sdhi0_resources, +}; + +/* SDHI1 */ +static struct sh_mobile_sdhi_info sdhi1_info = { + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, + .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, +}; + +static struct resource sdhi1_resources[] = { + [0] = { + .name = "SDHI1", + .start = 0xe6860000, + .end = 0xe6860100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x0E80), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = evt2irq(0x0EA0), + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = evt2irq(0x0EC0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi1_device = { + .name = "sh_mobile_sdhi", + .id = 1, + .dev = { + .platform_data = &sdhi1_info, + }, + .num_resources = ARRAY_SIZE(sdhi1_resources), + .resource = sdhi1_resources, +}; + +/* MMCIF */ +static struct sh_mmcif_plat_data sh_mmcif_plat = { + .sup_pclk = 0, + .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, + .caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_8_BIT_DATA | + MMC_CAP_NONREMOVABLE, +}; + +static struct resource sh_mmcif_resources[] = { + [0] = { + .name = "MMCIF", + .start = 0xe6bd0000, + .end = 0xe6bd0100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* MMC ERR */ + .start = evt2irq(0x1AC0), + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* MMC NOR */ + .start = evt2irq(0x1AE0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh_mmcif_device = { + .name = "sh_mmcif", + .id = -1, + .dev = { + .platform_data = &sh_mmcif_plat, + }, + .num_resources = ARRAY_SIZE(sh_mmcif_resources), + .resource = sh_mmcif_resources, +}; + +/* I2C */ +static struct i2c_board_info i2c0_devices[] = { + { + I2C_BOARD_INFO("st1232-ts", 0x55), + .irq = evt2irq(0x0340), + }, +}; + +/* + * board devices + */ +static struct platform_device *eva_devices[] __initdata = { + &lcdc0_device, + &gpio_keys_device, + &sh_eth_device, + &sdhi0_device, + &sh_mmcif_device, +}; + +static void __init eva_clock_init(void) +{ + struct clk *system = clk_get(NULL, "system_clk"); + struct clk *xtal1 = clk_get(NULL, "extal1"); + struct clk *usb24s = clk_get(NULL, "usb24s"); + + if (IS_ERR(system) || + IS_ERR(xtal1) || + IS_ERR(usb24s)) { + pr_err("armadillo800eva board clock init failed\n"); + goto clock_error; + } + + /* armadillo 800 eva extal1 is 24MHz */ + clk_set_rate(xtal1, 24000000); + + /* usb24s use extal1 (= system) clock (= 24MHz) */ + clk_set_parent(usb24s, system); + +clock_error: + if (!IS_ERR(system)) + clk_put(system); + if (!IS_ERR(xtal1)) + clk_put(xtal1); + if (!IS_ERR(usb24s)) + clk_put(usb24s); +} + +/* + * board init + */ +static void __init eva_init(void) +{ + eva_clock_init(); + + r8a7740_pinmux_init(); + + /* SCIFA1 */ + gpio_request(GPIO_FN_SCIFA1_RXD, NULL); + gpio_request(GPIO_FN_SCIFA1_TXD, NULL); + + /* LCDC0 */ + gpio_request(GPIO_FN_LCDC0_SELECT, NULL); + gpio_request(GPIO_FN_LCD0_D0, NULL); + gpio_request(GPIO_FN_LCD0_D1, NULL); + gpio_request(GPIO_FN_LCD0_D2, NULL); + gpio_request(GPIO_FN_LCD0_D3, NULL); + gpio_request(GPIO_FN_LCD0_D4, NULL); + gpio_request(GPIO_FN_LCD0_D5, NULL); + gpio_request(GPIO_FN_LCD0_D6, NULL); + gpio_request(GPIO_FN_LCD0_D7, NULL); + gpio_request(GPIO_FN_LCD0_D8, NULL); + gpio_request(GPIO_FN_LCD0_D9, NULL); + gpio_request(GPIO_FN_LCD0_D10, NULL); + gpio_request(GPIO_FN_LCD0_D11, NULL); + gpio_request(GPIO_FN_LCD0_D12, NULL); + gpio_request(GPIO_FN_LCD0_D13, NULL); + gpio_request(GPIO_FN_LCD0_D14, NULL); + gpio_request(GPIO_FN_LCD0_D15, NULL); + gpio_request(GPIO_FN_LCD0_D16, NULL); + gpio_request(GPIO_FN_LCD0_D17, NULL); + gpio_request(GPIO_FN_LCD0_D18_PORT40, NULL); + gpio_request(GPIO_FN_LCD0_D19_PORT4, NULL); + gpio_request(GPIO_FN_LCD0_D20_PORT3, NULL); + gpio_request(GPIO_FN_LCD0_D21_PORT2, NULL); + gpio_request(GPIO_FN_LCD0_D22_PORT0, NULL); + gpio_request(GPIO_FN_LCD0_D23_PORT1, NULL); + gpio_request(GPIO_FN_LCD0_DCK, NULL); + gpio_request(GPIO_FN_LCD0_VSYN, NULL); + gpio_request(GPIO_FN_LCD0_HSYN, NULL); + gpio_request(GPIO_FN_LCD0_DISP, NULL); + gpio_request(GPIO_FN_LCD0_LCLK_PORT165, NULL); + + gpio_request(GPIO_PORT61, NULL); /* LCDDON */ + gpio_direction_output(GPIO_PORT61, 1); + + gpio_request(GPIO_PORT202, NULL); /* LCD0_LED_CONT */ + gpio_direction_output(GPIO_PORT202, 0); + + /* Touchscreen */ + gpio_request(GPIO_FN_IRQ10, NULL); /* TP_INT */ + gpio_request(GPIO_PORT166, NULL); /* TP_RST_B */ + gpio_direction_output(GPIO_PORT166, 1); + + /* GETHER */ + gpio_request(GPIO_FN_ET_CRS, NULL); + gpio_request(GPIO_FN_ET_MDC, NULL); + gpio_request(GPIO_FN_ET_MDIO, NULL); + gpio_request(GPIO_FN_ET_TX_ER, NULL); + gpio_request(GPIO_FN_ET_RX_ER, NULL); + gpio_request(GPIO_FN_ET_ERXD0, NULL); + gpio_request(GPIO_FN_ET_ERXD1, NULL); + gpio_request(GPIO_FN_ET_ERXD2, NULL); + gpio_request(GPIO_FN_ET_ERXD3, NULL); + gpio_request(GPIO_FN_ET_TX_CLK, NULL); + gpio_request(GPIO_FN_ET_TX_EN, NULL); + gpio_request(GPIO_FN_ET_ETXD0, NULL); + gpio_request(GPIO_FN_ET_ETXD1, NULL); + gpio_request(GPIO_FN_ET_ETXD2, NULL); + gpio_request(GPIO_FN_ET_ETXD3, NULL); + gpio_request(GPIO_FN_ET_PHY_INT, NULL); + gpio_request(GPIO_FN_ET_COL, NULL); + gpio_request(GPIO_FN_ET_RX_DV, NULL); + gpio_request(GPIO_FN_ET_RX_CLK, NULL); + + gpio_request(GPIO_PORT18, NULL); /* PHY_RST */ + gpio_direction_output(GPIO_PORT18, 1); + + /* USB */ + gpio_request(GPIO_PORT159, NULL); /* USB_DEVICE_MODE */ + gpio_direction_input(GPIO_PORT159); + + if (gpio_get_value(GPIO_PORT159)) { + /* USB Host */ + } else { + /* USB Func */ + gpio_request(GPIO_FN_VBUS, NULL); + platform_device_register(&usbhsf_device); + } + + /* SDHI0 */ + gpio_request(GPIO_FN_SDHI0_CMD, NULL); + gpio_request(GPIO_FN_SDHI0_CLK, NULL); + gpio_request(GPIO_FN_SDHI0_D0, NULL); + gpio_request(GPIO_FN_SDHI0_D1, NULL); + gpio_request(GPIO_FN_SDHI0_D2, NULL); + gpio_request(GPIO_FN_SDHI0_D3, NULL); + gpio_request(GPIO_FN_SDHI0_WP, NULL); + + gpio_request(GPIO_PORT17, NULL); /* SDHI0_18/33_B */ + gpio_request(GPIO_PORT74, NULL); /* SDHI0_PON */ + gpio_request(GPIO_PORT75, NULL); /* SDSLOT1_PON */ + gpio_direction_output(GPIO_PORT17, 0); + gpio_direction_output(GPIO_PORT74, 1); + gpio_direction_output(GPIO_PORT75, 1); + + /* we can use GPIO_FN_IRQ31_PORT167 here for SDHI0 CD irq */ + + /* + * MMCIF + * + * Here doesn't care SW1.4 status, + * since CON2 is not mounted. + */ + gpio_request(GPIO_FN_MMC1_CLK_PORT103, NULL); + gpio_request(GPIO_FN_MMC1_CMD_PORT104, NULL); + gpio_request(GPIO_FN_MMC1_D0_PORT149, NULL); + gpio_request(GPIO_FN_MMC1_D1_PORT148, NULL); + gpio_request(GPIO_FN_MMC1_D2_PORT147, NULL); + gpio_request(GPIO_FN_MMC1_D3_PORT146, NULL); + gpio_request(GPIO_FN_MMC1_D4_PORT145, NULL); + gpio_request(GPIO_FN_MMC1_D5_PORT144, NULL); + gpio_request(GPIO_FN_MMC1_D6_PORT143, NULL); + gpio_request(GPIO_FN_MMC1_D7_PORT142, NULL); + + /* + * CAUTION + * + * DBGMD/LCDC0/FSIA MUX + * DBGMD_SELECT_B should be set after setting PFC Function. + */ + gpio_request(GPIO_PORT176, NULL); + gpio_direction_output(GPIO_PORT176, 1); + + /* + * We can switch CON8/CON14 by SW1.5, + * but it needs after DBGMD_SELECT_B + */ + gpio_request(GPIO_PORT6, NULL); + gpio_direction_input(GPIO_PORT6); + if (gpio_get_value(GPIO_PORT6)) { + /* CON14 enable */ + } else { + /* CON8 (SDHI1) enable */ + gpio_request(GPIO_FN_SDHI1_CLK, NULL); + gpio_request(GPIO_FN_SDHI1_CMD, NULL); + gpio_request(GPIO_FN_SDHI1_D0, NULL); + gpio_request(GPIO_FN_SDHI1_D1, NULL); + gpio_request(GPIO_FN_SDHI1_D2, NULL); + gpio_request(GPIO_FN_SDHI1_D3, NULL); + gpio_request(GPIO_FN_SDHI1_CD, NULL); + gpio_request(GPIO_FN_SDHI1_WP, NULL); + + gpio_request(GPIO_PORT16, NULL); /* SDSLOT2_PON */ + gpio_direction_output(GPIO_PORT16, 1); + + platform_device_register(&sdhi1_device); + } + + +#ifdef CONFIG_CACHE_L2X0 + /* Early BRESP enable, Shared attribute override enable, 32K*8way */ + l2x0_init(__io(0xf0002000), 0x40440000, 0x82000fff); +#endif + + i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); + + r8a7740_add_standard_devices(); + + platform_add_devices(eva_devices, + ARRAY_SIZE(eva_devices)); +} + +static void __init eva_earlytimer_init(void) +{ + r8a7740_clock_init(MD_CK0 | MD_CK2); + shmobile_earlytimer_init(); +} + +static void __init eva_add_early_devices(void) +{ + r8a7740_add_early_devices(); + + /* override timer setup with board-specific code */ + shmobile_timer.init = eva_earlytimer_init; +} + +static const char *eva_boards_compat_dt[] __initdata = { + "renesas,armadillo800eva", + NULL, +}; + +DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva") + .map_io = r8a7740_map_io, + .init_early = eva_add_early_devices, + .init_irq = r8a7740_init_irq, + .handle_irq = shmobile_handle_irq_intc, + .init_machine = eva_init, + .timer = &shmobile_timer, + .dt_compat = eva_boards_compat_dt, +MACHINE_END diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c index 81fd95f7f52a..63ab7062bee3 100644 --- a/arch/arm/mach-shmobile/board-bonito.c +++ b/arch/arm/mach-shmobile/board-bonito.c @@ -486,7 +486,7 @@ static void __init bonito_earlytimer_init(void) shmobile_earlytimer_init(); } -void __init bonito_add_early_devices(void) +static void __init bonito_add_early_devices(void) { r8a7740_add_early_devices(); diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c new file mode 100644 index 000000000000..d8e33b682832 --- /dev/null +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -0,0 +1,460 @@ +/* + * KZM-A9-GT board support + * + * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/i2c.h> +#include <linux/i2c/pcf857x.h> +#include <linux/input.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sh_mmcif.h> +#include <linux/mmc/sh_mobile_sdhi.h> +#include <linux/mfd/tmio.h> +#include <linux/platform_device.h> +#include <linux/smsc911x.h> +#include <linux/usb/r8a66597.h> +#include <linux/videodev2.h> +#include <mach/irqs.h> +#include <mach/sh73a0.h> +#include <mach/common.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/hardware/gic.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <video/sh_mobile_lcdc.h> + +/* + * external GPIO + */ +#define GPIO_PCF8575_BASE (GPIO_NR) +#define GPIO_PCF8575_PORT10 (GPIO_NR + 8) +#define GPIO_PCF8575_PORT11 (GPIO_NR + 9) +#define GPIO_PCF8575_PORT12 (GPIO_NR + 10) +#define GPIO_PCF8575_PORT13 (GPIO_NR + 11) +#define GPIO_PCF8575_PORT14 (GPIO_NR + 12) +#define GPIO_PCF8575_PORT15 (GPIO_NR + 13) +#define GPIO_PCF8575_PORT16 (GPIO_NR + 14) + +/* SMSC 9221 */ +static struct resource smsc9221_resources[] = { + [0] = { + .start = 0x10000000, /* CS4 */ + .end = 0x100000ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x260), /* IRQ3 */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config smsc9221_platdata = { + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, +}; + +static struct platform_device smsc_device = { + .name = "smsc911x", + .dev = { + .platform_data = &smsc9221_platdata, + }, + .resource = smsc9221_resources, + .num_resources = ARRAY_SIZE(smsc9221_resources), +}; + +/* USB external chip */ +static struct r8a66597_platdata usb_host_data = { + .on_chip = 0, + .xtal = R8A66597_PLATDATA_XTAL_48MHZ, +}; + +static struct resource usb_resources[] = { + [0] = { + .start = 0x10010000, + .end = 0x1001ffff - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x220), /* IRQ1 */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_host_device = { + .name = "r8a66597_hcd", + .dev = { + .platform_data = &usb_host_data, + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(usb_resources), + .resource = usb_resources, +}; + +/* LCDC */ +static struct fb_videomode kzm_lcdc_mode = { + .name = "WVGA Panel", + .xres = 800, + .yres = 480, + .left_margin = 220, + .right_margin = 110, + .hsync_len = 70, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + .sync = 0, +}; + +static struct sh_mobile_lcdc_info lcdc_info = { + .clock_source = LCDC_CLK_BUS, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .fourcc = V4L2_PIX_FMT_RGB565, + .interface_type = RGB24, + .lcd_modes = &kzm_lcdc_mode, + .num_modes = 1, + .clock_divider = 5, + .flags = 0, + .panel_cfg = { + .width = 152, + .height = 91, + }, + } +}; + +static struct resource lcdc_resources[] = { + [0] = { + .name = "LCDC", + .start = 0xfe940000, + .end = 0xfe943fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x580), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc_resources), + .resource = lcdc_resources, + .dev = { + .platform_data = &lcdc_info, + .coherent_dma_mask = ~0, + }, +}; + +/* MMCIF */ +static struct resource sh_mmcif_resources[] = { + [0] = { + .name = "MMCIF", + .start = 0xe6bd0000, + .end = 0xe6bd00ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(141), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = gic_spi(140), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_mmcif_plat_data sh_mmcif_platdata = { + .ocr = MMC_VDD_165_195, + .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, +}; + +static struct platform_device mmc_device = { + .name = "sh_mmcif", + .dev = { + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + .platform_data = &sh_mmcif_platdata, + }, + .num_resources = ARRAY_SIZE(sh_mmcif_resources), + .resource = sh_mmcif_resources, +}; + +/* SDHI */ +static struct sh_mobile_sdhi_info sdhi0_info = { + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, + .tmio_caps = MMC_CAP_SD_HIGHSPEED, + .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, +}; + +static struct resource sdhi0_resources[] = { + [0] = { + .name = "SDHI0", + .start = 0xee100000, + .end = 0xee1000ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, + .start = gic_spi(83), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .name = SH_MOBILE_SDHI_IRQ_SDCARD, + .start = gic_spi(84), + .flags = IORESOURCE_IRQ, + }, + [3] = { + .name = SH_MOBILE_SDHI_IRQ_SDIO, + .start = gic_spi(85), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi0_device = { + .name = "sh_mobile_sdhi", + .num_resources = ARRAY_SIZE(sdhi0_resources), + .resource = sdhi0_resources, + .dev = { + .platform_data = &sdhi0_info, + }, +}; + +/* KEY */ +#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 } + +static struct gpio_keys_button gpio_buttons[] = { + GPIO_KEY(KEY_BACK, GPIO_PCF8575_PORT10, "SW3"), + GPIO_KEY(KEY_RIGHT, GPIO_PCF8575_PORT11, "SW2-R"), + GPIO_KEY(KEY_LEFT, GPIO_PCF8575_PORT12, "SW2-L"), + GPIO_KEY(KEY_ENTER, GPIO_PCF8575_PORT13, "SW2-P"), + GPIO_KEY(KEY_UP, GPIO_PCF8575_PORT14, "SW2-U"), + GPIO_KEY(KEY_DOWN, GPIO_PCF8575_PORT15, "SW2-D"), + GPIO_KEY(KEY_HOME, GPIO_PCF8575_PORT16, "SW1"), +}; + +static struct gpio_keys_platform_data gpio_key_info = { + .buttons = gpio_buttons, + .nbuttons = ARRAY_SIZE(gpio_buttons), + .poll_interval = 250, /* poling at this point */ +}; + +static struct platform_device gpio_keys_device = { + /* gpio-pcf857x.c driver doesn't support gpio_to_irq() */ + .name = "gpio-keys-polled", + .dev = { + .platform_data = &gpio_key_info, + }, +}; + +/* I2C */ +static struct pcf857x_platform_data pcf8575_pdata = { + .gpio_base = GPIO_PCF8575_BASE, +}; + +static struct i2c_board_info i2c1_devices[] = { + { + I2C_BOARD_INFO("st1232-ts", 0x55), + .irq = intcs_evt2irq(0x300), /* IRQ8 */ + }, +}; + +static struct i2c_board_info i2c3_devices[] = { + { + I2C_BOARD_INFO("pcf8575", 0x20), + .platform_data = &pcf8575_pdata, + }, +}; + +static struct platform_device *kzm_devices[] __initdata = { + &smsc_device, + &usb_host_device, + &lcdc_device, + &mmc_device, + &sdhi0_device, + &gpio_keys_device, +}; + +/* + * FIXME + * + * This is quick hack for enabling LCDC backlight + */ +static int __init as3711_enable_lcdc_backlight(void) +{ + struct i2c_adapter *a = i2c_get_adapter(0); + struct i2c_msg msg; + int i, ret; + __u8 magic[] = { + 0x40, 0x2a, + 0x43, 0x3c, + 0x44, 0x3c, + 0x45, 0x3c, + 0x54, 0x03, + 0x51, 0x00, + 0x51, 0x01, + 0xff, 0x00, /* wait */ + 0x43, 0xf0, + 0x44, 0xf0, + 0x45, 0xf0, + }; + + if (!machine_is_kzm9g()) + return 0; + + if (!a) + return 0; + + msg.addr = 0x40; + msg.len = 2; + msg.flags = 0; + + for (i = 0; i < ARRAY_SIZE(magic); i += 2) { + msg.buf = magic + i; + + if (0xff == msg.buf[0]) { + udelay(500); + continue; + } + + ret = i2c_transfer(a, &msg, 1); + if (ret < 0) { + pr_err("i2c transfer fail\n"); + break; + } + } + + return 0; +} +device_initcall(as3711_enable_lcdc_backlight); + +static void __init kzm_init(void) +{ + sh73a0_pinmux_init(); + + /* enable SCIFA4 */ + gpio_request(GPIO_FN_SCIFA4_TXD, NULL); + gpio_request(GPIO_FN_SCIFA4_RXD, NULL); + gpio_request(GPIO_FN_SCIFA4_RTS_, NULL); + gpio_request(GPIO_FN_SCIFA4_CTS_, NULL); + + /* CS4 for SMSC/USB */ + gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */ + + /* SMSC */ + gpio_request(GPIO_PORT224, NULL); /* IRQ3 */ + gpio_direction_input(GPIO_PORT224); + + /* LCDC */ + gpio_request(GPIO_FN_LCDD23, NULL); + gpio_request(GPIO_FN_LCDD22, NULL); + gpio_request(GPIO_FN_LCDD21, NULL); + gpio_request(GPIO_FN_LCDD20, NULL); + gpio_request(GPIO_FN_LCDD19, NULL); + gpio_request(GPIO_FN_LCDD18, NULL); + gpio_request(GPIO_FN_LCDD17, NULL); + gpio_request(GPIO_FN_LCDD16, NULL); + gpio_request(GPIO_FN_LCDD15, NULL); + gpio_request(GPIO_FN_LCDD14, NULL); + gpio_request(GPIO_FN_LCDD13, NULL); + gpio_request(GPIO_FN_LCDD12, NULL); + gpio_request(GPIO_FN_LCDD11, NULL); + gpio_request(GPIO_FN_LCDD10, NULL); + gpio_request(GPIO_FN_LCDD9, NULL); + gpio_request(GPIO_FN_LCDD8, NULL); + gpio_request(GPIO_FN_LCDD7, NULL); + gpio_request(GPIO_FN_LCDD6, NULL); + gpio_request(GPIO_FN_LCDD5, NULL); + gpio_request(GPIO_FN_LCDD4, NULL); + gpio_request(GPIO_FN_LCDD3, NULL); + gpio_request(GPIO_FN_LCDD2, NULL); + gpio_request(GPIO_FN_LCDD1, NULL); + gpio_request(GPIO_FN_LCDD0, NULL); + gpio_request(GPIO_FN_LCDDISP, NULL); + gpio_request(GPIO_FN_LCDDCK, NULL); + + gpio_request(GPIO_PORT222, NULL); /* LCDCDON */ + gpio_request(GPIO_PORT226, NULL); /* SC */ + gpio_direction_output(GPIO_PORT222, 1); + gpio_direction_output(GPIO_PORT226, 1); + + /* Touchscreen */ + gpio_request(GPIO_PORT223, NULL); /* IRQ8 */ + gpio_direction_input(GPIO_PORT223); + + /* enable MMCIF */ + gpio_request(GPIO_FN_MMCCLK0, NULL); + gpio_request(GPIO_FN_MMCCMD0_PU, NULL); + gpio_request(GPIO_FN_MMCD0_0_PU, NULL); + gpio_request(GPIO_FN_MMCD0_1_PU, NULL); + gpio_request(GPIO_FN_MMCD0_2_PU, NULL); + gpio_request(GPIO_FN_MMCD0_3_PU, NULL); + gpio_request(GPIO_FN_MMCD0_4_PU, NULL); + gpio_request(GPIO_FN_MMCD0_5_PU, NULL); + gpio_request(GPIO_FN_MMCD0_6_PU, NULL); + gpio_request(GPIO_FN_MMCD0_7_PU, NULL); + + /* enable SD */ + gpio_request(GPIO_FN_SDHIWP0, NULL); + gpio_request(GPIO_FN_SDHICD0, NULL); + gpio_request(GPIO_FN_SDHICMD0, NULL); + gpio_request(GPIO_FN_SDHICLK0, NULL); + gpio_request(GPIO_FN_SDHID0_3, NULL); + gpio_request(GPIO_FN_SDHID0_2, NULL); + gpio_request(GPIO_FN_SDHID0_1, NULL); + gpio_request(GPIO_FN_SDHID0_0, NULL); + gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL); + gpio_request(GPIO_PORT15, NULL); + gpio_direction_output(GPIO_PORT15, 1); /* power */ + + /* I2C 3 */ + gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL); + gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL); + +#ifdef CONFIG_CACHE_L2X0 + /* Early BRESP enable, Shared attribute override enable, 64K*8way */ + l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff); +#endif + + i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices)); + i2c_register_board_info(3, i2c3_devices, ARRAY_SIZE(i2c3_devices)); + + sh73a0_add_standard_devices(); + platform_add_devices(kzm_devices, ARRAY_SIZE(kzm_devices)); +} + +static const char *kzm9g_boards_compat_dt[] __initdata = { + "renesas,kzm9g", + NULL, +}; + +DT_MACHINE_START(KZM9G_DT, "kzm9g") + .map_io = sh73a0_map_io, + .init_early = sh73a0_add_early_devices, + .nr_irqs = NR_IRQS_LEGACY, + .init_irq = sh73a0_init_irq, + .handle_irq = gic_handle_irq, + .init_machine = kzm_init, + .timer = &shmobile_timer, + .dt_compat = kzm9g_boards_compat_dt, +MACHINE_END diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 8c6202bb6aeb..aae2e24fde46 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -908,6 +908,8 @@ fsi_set_rate_end: static struct sh_fsi_platform_info fsi_info = { .port_a = { .flags = SH_FSI_BRS_INV, + .tx_id = SHDMA_SLAVE_FSIA_TX, + .rx_id = SHDMA_SLAVE_FSIA_RX, }, .port_b = { .flags = SH_FSI_BRS_INV | @@ -920,9 +922,11 @@ static struct sh_fsi_platform_info fsi_info = { static struct resource fsi_resources[] = { [0] = { + /* we need 0xFE1F0000 to access DMA + * instead of 0xFE3C0000 */ .name = "FSI", - .start = 0xFE3C0000, - .end = 0xFE3C0400 - 1, + .start = 0xFE1F0000, + .end = 0xFE1F0400 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -1248,6 +1252,8 @@ static void mackerel_camera_del(struct soc_camera_device *icd) static struct sh_mobile_ceu_info sh_mobile_ceu_info = { .flags = SH_CEU_FLAG_USE_8BIT_BUS, + .max_width = 8188, + .max_height = 8188, }; static struct resource ceu_resources[] = { diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index 81b54a6af20f..26eea5f21054 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -352,6 +352,7 @@ enum { MSTP329, MSTP328, MSTP323, MSTP320, MSTP314, MSTP313, MSTP312, + MSTP309, MSTP416, MSTP415, MSTP407, MSTP406, @@ -382,6 +383,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */ [MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */ [MSTP312] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMC */ + [MSTP309] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 9, 0), /* GEther */ [MSTP416] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 16, 0), /* USBHOST */ [MSTP415] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 15, 0), /* SDHI2 */ @@ -447,6 +449,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP312]), + CLKDEV_DEV_ID("sh-eth", &mstp_clks[MSTP309]), CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h index 9b3598e4f105..398e2c10913b 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h @@ -482,6 +482,9 @@ enum { GPIO_FN_FSIAILR_PU, GPIO_FN_FSIAIBT_PU, GPIO_FN_FSIAISLD_PU, + + /* end of GPIO */ + GPIO_NR, }; /* DMA slave IDs */ diff --git a/arch/arm/mach-shmobile/pfc-sh73a0.c b/arch/arm/mach-shmobile/pfc-sh73a0.c index e05634ce2e0d..4a547b803268 100644 --- a/arch/arm/mach-shmobile/pfc-sh73a0.c +++ b/arch/arm/mach-shmobile/pfc-sh73a0.c @@ -829,14 +829,14 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PORT27_I2C_SCL2_MARK, PORT27_FN2, MSEL2CR_MSEL17_0, MSEL2CR_MSEL16_1), \ PINMUX_DATA(PORT27_I2C_SCL3_MARK, PORT27_FN3, MSEL2CR_MSEL19_0, - MSEL2CR_MSEL18_0), \ + MSEL2CR_MSEL18_1), \ PINMUX_DATA(MFG0_OUT1_MARK, PORT27_FN4), \ PINMUX_DATA(PORT27_IROUT_MARK, PORT27_FN7), PINMUX_DATA(XDVFS2_MARK, PORT28_FN1), \ PINMUX_DATA(PORT28_I2C_SDA2_MARK, PORT28_FN2, MSEL2CR_MSEL17_0, MSEL2CR_MSEL16_1), \ PINMUX_DATA(PORT28_I2C_SDA3_MARK, PORT28_FN3, MSEL2CR_MSEL19_0, - MSEL2CR_MSEL18_0), \ + MSEL2CR_MSEL18_1), \ PINMUX_DATA(PORT28_TPU1TO1_MARK, PORT28_FN7), PINMUX_DATA(SIM_RST_MARK, PORT29_FN1), \ PINMUX_DATA(PORT29_TPU1TO1_MARK, PORT29_FN4), diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index 7006cdc8b8ca..bacdd667e3b1 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -22,7 +22,8 @@ #include <mach/common.h> #include <mach/emev2.h> -#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2()) +#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \ + of_machine_is_compatible("renesas,sh73a0")) #define is_r8a7779() machine_is_marzen() #define is_emev2() of_machine_is_compatible("renesas,emev2") diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 34a1548dbda6..ec4eb49c1693 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -18,6 +18,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include <linux/delay.h> +#include <linux/dma-mapping.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> @@ -60,6 +61,12 @@ static struct map_desc r8a7740_io_desc[] __initdata = { void __init r8a7740_map_io(void) { iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc)); + + /* + * DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't + * enough to allocate the frame buffer memory. + */ + init_consistent_dma_size(12 << 20); } /* SCIFA0 */ diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 10d160888133..af95af257301 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -16,6 +16,7 @@ #include <linux/bitops.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/leds.h> /* * GPIO unit register offsets. @@ -289,12 +290,34 @@ void orion_gpio_set_blink(unsigned pin, int blink) return; spin_lock_irqsave(&ochip->lock, flags); - __set_level(ochip, pin, 0); - __set_blinking(ochip, pin, blink); + __set_level(ochip, pin & 31, 0); + __set_blinking(ochip, pin & 31, blink); spin_unlock_irqrestore(&ochip->lock, flags); } EXPORT_SYMBOL(orion_gpio_set_blink); +#define ORION_BLINK_HALF_PERIOD 100 /* ms */ + +int orion_gpio_led_blink_set(unsigned gpio, int state, + unsigned long *delay_on, unsigned long *delay_off) +{ + + if (delay_on && delay_off && !*delay_on && !*delay_off) + *delay_on = *delay_off = ORION_BLINK_HALF_PERIOD; + + switch (state) { + case GPIO_LED_NO_BLINK_LOW: + case GPIO_LED_NO_BLINK_HIGH: + orion_gpio_set_blink(gpio, 0); + gpio_set_value(gpio, state); + break; + case GPIO_LED_BLINK: + orion_gpio_set_blink(gpio, 1); + } + return 0; +} +EXPORT_SYMBOL_GPL(orion_gpio_led_blink_set); + /***************************************************************************** * Orion GPIO IRQ diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h index 3abf30428bee..bec0c98ce41f 100644 --- a/arch/arm/plat-orion/include/plat/gpio.h +++ b/arch/arm/plat-orion/include/plat/gpio.h @@ -19,6 +19,8 @@ */ void orion_gpio_set_unused(unsigned pin); void orion_gpio_set_blink(unsigned pin, int blink); +int orion_gpio_led_blink_set(unsigned gpio, int state, + unsigned long *delay_on, unsigned long *delay_off); #define GPIO_INPUT_OK (1 << 0) #define GPIO_OUTPUT_OK (1 << 1) |