diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/boot/dts/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/boot/dts/ste-u300.dts | 86 | ||||
| -rw-r--r-- | arch/arm/mach-u300/core.c | 81 |
3 files changed, 168 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b9f7121e6ecf..3dd1316a5a27 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -197,6 +197,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra114-pluto.dtb dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ versatile-pb.dtb +dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ vexpress-v2p-ca15-tc1.dtb \ diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts new file mode 100644 index 000000000000..9e423eb5aa0a --- /dev/null +++ b/arch/arm/boot/dts/ste-u300.dts @@ -0,0 +1,86 @@ +/* + * Device Tree for the ST-Ericsson U300 Machine and SoC + */ + +/dts-v1/; +/include/ "skeleton.dtsi" + +/ { + model = "ST-Ericsson U300"; + compatible = "stericsson,u300"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + bootargs = "root=/dev/ram0 console=ttyAMA0,115200n8 earlyprintk"; + }; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + memory { + reg = <0x48000000 0x03c00000>; + }; + + timer: timer@c0014000 { + compatible = "stericsson,u300-apptimer"; + reg = <0xc0014000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <24 25 26 27>; + }; + + gpio: gpio@c0016000 { + compatible = "stericsson,gpio-coh901"; + reg = <0xc0016000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <0 1 2 18 21 22 23>; + interrupt-names = "gpio0", "gpio1", "gpio2", "gpio3", + "gpio4", "gpio5", "gpio6"; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@c0011000 { + compatible = "stericsson,pinctrl-u300"; + reg = <0xc0011000 0x1000>; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vica: interrupt-controller@a0001000 { + compatible = "arm,versatile-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xa0001000 0x20>; + }; + + vicb: interrupt-controller@a0002000 { + compatible = "arm,versatile-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xa0002000 0x20>; + }; + + uart0: serial@c0013000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xc0013000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <22>; + }; + + uart1: serial@c0007000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xc0007000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <20>; + }; + }; +}; diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index a683d17b2ce4..a210b1c4ccf4 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -33,6 +33,9 @@ #include <linux/platform_data/pinctrl-coh901.h> #include <linux/platform_data/dma-coh901318.h> #include <linux/irqchip/arm-vic.h> +#include <linux/irqchip.h> +#include <linux/of_platform.h> +#include <linux/clocksource.h> #include <asm/types.h> #include <asm/setup.h> @@ -698,3 +701,81 @@ MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board") .init_machine = u300_init_machine, .restart = u300_restart, MACHINE_END + +#ifdef CONFIG_OF + +/* These are mostly to get the right device names for the clock lookups */ +static struct of_dev_auxdata u300_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("stericsson,pinctrl-u300", U300_SYSCON_BASE, + "pinctrl-u300", NULL), + OF_DEV_AUXDATA("stericsson,gpio-coh901", U300_GPIO_BASE, + "u300-gpio", &u300_gpio_plat), + OF_DEV_AUXDATA("arm,primecell", U300_UART0_BASE, + "uart0", &uart0_plat_data), + OF_DEV_AUXDATA("arm,primecell", U300_UART1_BASE, + "uart1", &uart1_plat_data), + OF_DEV_AUXDATA("arm,primecell", U300_MMCSD_BASE, + "mmci", &mmcsd_platform_data), + { /* sentinel */ }, +}; + +static void __init u300_init_irq_dt(void) +{ + struct clk *clk; + + /* initialize clocking early, we want to clock the INTCON */ + u300_clk_init(U300_SYSCON_VBASE); + + /* Bootstrap EMIF and SEMI clocks */ + clk = clk_get_sys("pl172", NULL); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); + clk = clk_get_sys("semi", NULL); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); + + /* Clock the interrupt controller */ + clk = clk_get_sys("intcon", NULL); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); + + irqchip_init(); +} + +static void __init u300_init_machine_dt(void) +{ + u16 val; + + /* Check what platform we run and print some status information */ + u300_init_check_chip(); + + u300_assign_physmem(); + + /* Initialize pinmuxing */ + pinctrl_register_mappings(u300_pinmux_map, + ARRAY_SIZE(u300_pinmux_map)); + + of_platform_populate(NULL, of_default_bus_match_table, + u300_auxdata_lookup, NULL); + + /* Enable SEMI self refresh */ + val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) | + U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE; + writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR); +} + +static const char * u300_board_compat[] = { + "stericsson,u300", + NULL, +}; + +DT_MACHINE_START(U300_DT, "U300 S335/B335 (Device Tree)") + .map_io = u300_map_io, + .init_irq = u300_init_irq_dt, + .init_time = clocksource_of_init, + .init_machine = u300_init_machine_dt, + .restart = u300_restart, + .dt_compat = u300_board_compat, +MACHINE_END + +#endif /* CONFIG_OF */ |