diff options
Diffstat (limited to 'arch/arm')
977 files changed, 25255 insertions, 17874 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2e8091e2d8a8..7630ba9cb6cc 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -347,22 +347,9 @@ config ARCH_MULTIPLATFORM select SPARSE_IRQ select USE_OF -config ARCH_EP93XX - bool "EP93xx-based" - select ARCH_SPARSEMEM_ENABLE - select ARM_AMBA - imply ARM_PATCH_PHYS_VIRT - select ARM_VIC - select AUTO_ZRELADDR - select CLKSRC_MMIO - select CPU_ARM920T - select GPIOLIB - select COMMON_CLK - help - This enables support for the Cirrus EP93xx series of CPUs. - config ARCH_FOOTBRIDGE bool "FootBridge" + depends on CPU_LITTLE_ENDIAN select CPU_SA110 select FOOTBRIDGE select NEED_MACH_MEMORY_H @@ -370,68 +357,10 @@ config ARCH_FOOTBRIDGE Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. -config ARCH_IOP32X - bool "IOP32x-based" - select CPU_XSCALE - select GPIO_IOP - select GPIOLIB - select FORCE_PCI - select PLAT_IOP - help - Support for Intel's 80219 and IOP32X (XScale) family of - processors. - -config ARCH_IXP4XX - bool "IXP4xx-based" - select ARCH_SUPPORTS_BIG_ENDIAN - select ARM_PATCH_PHYS_VIRT - select CPU_XSCALE - select GPIO_IXP4XX - select GPIOLIB - select HAVE_PCI - select IXP4XX_IRQ - select IXP4XX_TIMER - select SPARSE_IRQ - select USB_EHCI_BIG_ENDIAN_DESC - select USB_EHCI_BIG_ENDIAN_MMIO - help - Support for Intel's IXP4XX (XScale) family of processors. - -config ARCH_DOVE - bool "Marvell Dove" - select CPU_PJ4 - select GPIOLIB - select HAVE_PCI - select MVEBU_MBUS - select PINCTRL - select PINCTRL_DOVE - select PLAT_ORION_LEGACY - select SPARSE_IRQ - select PM_GENERIC_DOMAINS if PM - help - Support for the Marvell Dove SoC 88AP510 - -config ARCH_PXA - bool "PXA2xx/PXA3xx-based" - select ARCH_MTD_XIP - select ARM_CPU_SUSPEND if PM - select AUTO_ZRELADDR - select COMMON_CLK - select CLKSRC_PXA - select CLKSRC_MMIO - select TIMER_OF - select CPU_XSCALE if !CPU_XSC3 - select GPIO_PXA - select GPIOLIB - select IRQ_DOMAIN - select PLAT_PXA - select SPARSE_IRQ - help - Support for Intel/Marvell's PXA2xx/PXA3xx processor line. - config ARCH_RPC bool "RiscPC" depends on !CC_IS_CLANG && GCC_VERSION < 90100 && GCC_VERSION >= 60000 + depends on CPU_LITTLE_ENDIAN select ARCH_ACORN select ARCH_MAY_HAVE_PC_FDC select ARCH_SPARSEMEM_ENABLE @@ -450,6 +379,7 @@ config ARCH_RPC config ARCH_SA1100 bool "SA1100-based" + depends on CPU_LITTLE_ENDIAN select ARCH_MTD_XIP select ARCH_SPARSEMEM_ENABLE select CLKSRC_MMIO @@ -466,37 +396,6 @@ config ARCH_SA1100 help Support for StrongARM 11x0 based boards. -config ARCH_S3C24XX - bool "Samsung S3C24XX SoCs" - select ATAGS - select CLKSRC_SAMSUNG_PWM - select GPIO_SAMSUNG - select GPIOLIB - select NEED_MACH_IO_H - select S3C2410_WATCHDOG - select SAMSUNG_ATAGS - select USE_OF - select WATCHDOG - help - Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 - and S3C2450 SoCs based systems, such as the Simtec Electronics BAST - (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the - Samsung SMDK2410 development board (and derivatives). - -config ARCH_OMAP1 - bool "TI OMAP1" - select ARCH_OMAP - select CLKSRC_MMIO - select GENERIC_IRQ_CHIP - select GPIOLIB - select HAVE_LEGACY_CLK - select IRQ_DOMAIN - select NEED_MACH_IO_H if PCCARD - select NEED_MACH_MEMORY_H - select SPARSE_IRQ - help - Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx) - endchoice menu "Multiple platform selection" @@ -561,7 +460,6 @@ config ARCH_VIRT select ARM_GIC_V3_ITS if PCI select ARM_PSCI select HAVE_ARM_ARCH_TIMER - select ARCH_SUPPORTS_BIG_ENDIAN config ARCH_AIROHA bool "Airoha SoC Support" @@ -620,9 +518,9 @@ source "arch/arm/mach-highbank/Kconfig" source "arch/arm/mach-hisi/Kconfig" -source "arch/arm/mach-imx/Kconfig" +source "arch/arm/mach-hpe/Kconfig" -source "arch/arm/mach-integrator/Kconfig" +source "arch/arm/mach-imx/Kconfig" source "arch/arm/mach-iop32x/Kconfig" @@ -656,8 +554,6 @@ source "arch/arm/mach-npcm/Kconfig" source "arch/arm/mach-nspire/Kconfig" -source "arch/arm/plat-omap/Kconfig" - source "arch/arm/mach-omap1/Kconfig" source "arch/arm/mach-omap2/Kconfig" @@ -667,7 +563,6 @@ source "arch/arm/mach-orion5x/Kconfig" source "arch/arm/mach-oxnas/Kconfig" source "arch/arm/mach-pxa/Kconfig" -source "arch/arm/plat-pxa/Kconfig" source "arch/arm/mach-qcom/Kconfig" @@ -675,8 +570,6 @@ source "arch/arm/mach-rda/Kconfig" source "arch/arm/mach-realtek/Kconfig" -source "arch/arm/mach-realview/Kconfig" - source "arch/arm/mach-rockchip/Kconfig" source "arch/arm/mach-s3c/Kconfig" @@ -705,8 +598,6 @@ source "arch/arm/mach-ux500/Kconfig" source "arch/arm/mach-versatile/Kconfig" -source "arch/arm/mach-vexpress/Kconfig" - source "arch/arm/mach-vt8500/Kconfig" source "arch/arm/mach-zynq/Kconfig" @@ -739,9 +630,6 @@ config ARCH_MPS2 config ARCH_ACORN bool -config PLAT_IOP - bool - config PLAT_ORION bool select CLKSRC_MMIO @@ -753,9 +641,6 @@ config PLAT_ORION_LEGACY bool select PLAT_ORION -config PLAT_PXA - bool - config PLAT_VERSATILE bool @@ -972,6 +857,17 @@ config ARM_ERRATA_764369 relevant cache maintenance functions and sets a specific bit in the diagnostic control register of the SCU. +config ARM_ERRATA_764319 + bool "ARM errata: Read to DBGPRSR and DBGOSLSR may generate Undefined instruction" + depends on CPU_V7 + help + This option enables the workaround for the 764319 Cortex A-9 erratum. + CP14 read accesses to the DBGPRSR and DBGOSLSR registers generate an + unexpected Undefined Instruction exception when the DBGSWENABLE + external pin is set to 0, even when the CP14 accesses are performed + from a privileged mode. This work around catches the exception in a + way the kernel does not stop execution. + config ARM_ERRATA_775420 bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock" depends on CPU_V7 diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 0c9497d549e3..9b0aa4822d69 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -210,6 +210,26 @@ choice Say Y here if you want kernel low-level debugging support on the FLEXCOM3 port of SAMA7G5. + config DEBUG_AT91_LAN966_FLEXCOM + bool "Kernel low-level debugging on LAN966 FLEXCOM USART" + select DEBUG_AT91_UART + depends on SOC_LAN966 + help + Say Y here if you want kernel low-level debugging support + on the FLEXCOM port of LAN966. + + DEBUG_UART_PHYS | DEBUG_UART_VIRT + + 0xe0040200 | 0xfd040200 | FLEXCOM0 + 0xe0044200 | 0xfd044200 | FLEXCOM1 + 0xe0060200 | 0xfd060200 | FLEXCOM2 + 0xe0064200 | 0xfd064200 | FLEXCOM3 + 0xe0070200 | 0xfd070200 | FLEXCOM4 + + By default, enabling FLEXCOM3 port. Based on requirement, use + DEBUG_UART_PHYS and DEBUG_UART_VIRT configurations from above + table. + config DEBUG_BCM2835 bool "Kernel low-level debugging on BCM2835 PL011 UART" depends on ARCH_BCM2835 && ARCH_MULTI_V6 @@ -1685,6 +1705,7 @@ config DEBUG_UART_PHYS default 0xd4017000 if DEBUG_MMP_UART2 default 0xd4018000 if DEBUG_MMP_UART3 default 0xe0000000 if DEBUG_SPEAR13XX + default 0xe0064200 if DEBUG_AT91_LAN966_FLEXCOM default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3 default 0xe4007000 if DEBUG_HIP04_UART default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0 @@ -1805,6 +1826,7 @@ config DEBUG_UART_VIRT default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT default 0xfcfe8600 if DEBUG_BCM63XX_UART default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX + default 0xfd064200 if DEBUG_AT91_LAN966_FLEXCOM default 0xfd531000 if DEBUG_STIH41X_SBC_ASC1 default 0xfd883000 if DEBUG_ALPINE_UART0 default 0xfdd32000 if DEBUG_STIH41X_ASC2 @@ -1837,9 +1859,9 @@ config DEBUG_UART_VIRT default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xfef36000 if DEBUG_HIGHBANK_UART - default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 - default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 - default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 + default 0xff0b0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 + default 0xff0b0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 + default 0xff0b9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 default 0xffd01000 if DEBUG_HIP01_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ diff --git a/arch/arm/Makefile b/arch/arm/Makefile index a2391b8de5a5..c8e3633f5434 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -179,7 +179,7 @@ machine-$(CONFIG_ARCH_FOOTBRIDGE) += footbridge machine-$(CONFIG_ARCH_GEMINI) += gemini machine-$(CONFIG_ARCH_HIGHBANK) += highbank machine-$(CONFIG_ARCH_HISI) += hisi -machine-$(CONFIG_ARCH_INTEGRATOR) += integrator +machine-$(CONFIG_ARCH_HPE) += hpe machine-$(CONFIG_ARCH_IOP32X) += iop32x machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx machine-$(CONFIG_ARCH_KEYSTONE) += keystone @@ -187,7 +187,6 @@ machine-$(CONFIG_ARCH_LPC18XX) += lpc18xx machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx machine-$(CONFIG_ARCH_MESON) += meson machine-$(CONFIG_ARCH_MMP) += mmp -machine-$(CONFIG_ARCH_MPS2) += vexpress machine-$(CONFIG_ARCH_MOXART) += moxart machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0 machine-$(CONFIG_ARCH_MVEBU) += mvebu @@ -207,7 +206,6 @@ machine-$(CONFIG_ARCH_PXA) += pxa machine-$(CONFIG_ARCH_QCOM) += qcom machine-$(CONFIG_ARCH_RDA) += rda machine-$(CONFIG_ARCH_REALTEK) += realtek -machine-$(CONFIG_ARCH_REALVIEW) += realview machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip machine-$(CONFIG_ARCH_RPC) += rpc machine-$(CONFIG_PLAT_SAMSUNG) += s3c @@ -220,18 +218,14 @@ machine-$(CONFIG_ARCH_STM32) += stm32 machine-$(CONFIG_ARCH_SUNXI) += sunxi machine-$(CONFIG_ARCH_TEGRA) += tegra machine-$(CONFIG_ARCH_U8500) += ux500 -machine-$(CONFIG_ARCH_VERSATILE) += versatile -machine-$(CONFIG_ARCH_VEXPRESS) += vexpress machine-$(CONFIG_ARCH_VT8500) += vt8500 machine-$(CONFIG_ARCH_ZYNQ) += zynq +machine-$(CONFIG_PLAT_VERSATILE) += versatile machine-$(CONFIG_PLAT_SPEAR) += spear # Platform directory name. This list is sorted alphanumerically # by CONFIG_* macro name. -plat-$(CONFIG_ARCH_OMAP) += omap plat-$(CONFIG_PLAT_ORION) += orion -plat-$(CONFIG_PLAT_PXA) += pxa -plat-$(CONFIG_PLAT_VERSATILE) += versatile # The byte offset of the kernel image in RAM from the start of RAM. TEXT_OFFSET := $(textofs-y) @@ -318,9 +312,9 @@ $(BOOT_TARGETS): vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ @$(kecho) ' Kernel: $(boot)/$@ is ready' +$(INSTALL_TARGETS): KBUILD_IMAGE = $(boot)/$(patsubst %install,%Image,$@) $(INSTALL_TARGETS): - $(CONFIG_SHELL) $(srctree)/$(boot)/install.sh "$(KERNELRELEASE)" \ - $(boot)/$(patsubst %install,%Image,$@) System.map "$(INSTALL_PATH)" + $(call cmd,install) PHONY += vdso_install vdso_install: diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/boot/compressed/misc-ep93xx.h index b3ec1db988db..3dc942589cba 100644 --- a/arch/arm/mach-ep93xx/include/mach/uncompress.h +++ b/arch/arm/boot/compressed/misc-ep93xx.h @@ -1,55 +1,25 @@ /* SPDX-License-Identifier: GPL-2.0-or-later */ /* - * arch/arm/mach-ep93xx/include/mach/uncompress.h - * * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> */ -#include <mach/ep93xx-regs.h> #include <asm/mach-types.h> -static unsigned char __raw_readb(unsigned int ptr) -{ - return *((volatile unsigned char *)ptr); -} - -static unsigned int __raw_readl(unsigned int ptr) +static inline unsigned int __raw_readl(unsigned int ptr) { return *((volatile unsigned int *)ptr); } -static void __raw_writeb(unsigned char value, unsigned int ptr) +static inline void __raw_writeb(unsigned char value, unsigned int ptr) { *((volatile unsigned char *)ptr) = value; } -static void __raw_writel(unsigned int value, unsigned int ptr) +static inline void __raw_writel(unsigned int value, unsigned int ptr) { *((volatile unsigned int *)ptr) = value; } -#define PHYS_UART_DATA (CONFIG_DEBUG_UART_PHYS + 0x00) -#define PHYS_UART_FLAG (CONFIG_DEBUG_UART_PHYS + 0x18) -#define UART_FLAG_TXFF 0x20 - -static inline void putc(int c) -{ - int i; - - for (i = 0; i < 10000; i++) { - /* Transmit fifo not full? */ - if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)) - break; - } - - __raw_writeb(c, PHYS_UART_DATA); -} - -static inline void flush(void) -{ -} - - /* * Some bootloaders don't turn off DMA from the ethernet MAC before * jumping to linux, which means that we might end up with bits of RX @@ -59,7 +29,7 @@ static inline void flush(void) #define PHYS_ETH_SELF_CTL 0x80010020 #define ETH_SELF_CTL_RESET 0x00000001 -static void ethernet_reset(void) +static inline void ep93xx_ethernet_reset(void) { unsigned int v; @@ -76,15 +46,41 @@ static void ethernet_reset(void) #define TS72XX_WDT_FEED_PHYS_BASE 0x23c00000 #define TS72XX_WDT_FEED_VAL 0x05 -static void __maybe_unused ts72xx_watchdog_disable(void) +static inline void __maybe_unused ts72xx_watchdog_disable(void) { __raw_writeb(TS72XX_WDT_FEED_VAL, TS72XX_WDT_FEED_PHYS_BASE); __raw_writeb(0, TS72XX_WDT_CONTROL_PHYS_BASE); } -static void arch_decomp_setup(void) +static inline void ep93xx_decomp_setup(void) { if (machine_is_ts72xx()) ts72xx_watchdog_disable(); - ethernet_reset(); + + if (machine_is_adssphere() || + machine_is_edb9301() || + machine_is_edb9302() || + machine_is_edb9302a() || + machine_is_edb9302a() || + machine_is_edb9307() || + machine_is_edb9307a() || + machine_is_edb9307a() || + machine_is_edb9312() || + machine_is_edb9315() || + machine_is_edb9315a() || + machine_is_edb9315a() || + machine_is_gesbc9312() || + machine_is_micro9() || + machine_is_micro9l() || + machine_is_micro9m() || + machine_is_micro9s() || + machine_is_micro9m() || + machine_is_micro9l() || + machine_is_micro9s() || + machine_is_sim_one() || + machine_is_snapper_cl15() || + machine_is_ts72xx() || + machine_is_bk3() || + machine_is_vision_ep9307()) + ep93xx_ethernet_reset(); } diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index c3c66ff2d696..cb2e069dc73f 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -23,6 +23,7 @@ unsigned int __machine_arch_type; #include <linux/types.h> #include <linux/linkage.h> #include "misc.h" +#include "misc-ep93xx.h" static void putstr(const char *ptr); @@ -143,6 +144,9 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p, free_mem_end_ptr = free_mem_ptr_end_p; __machine_arch_type = arch_id; +#ifdef CONFIG_ARCH_EP93XX + ep93xx_decomp_setup(); +#endif arch_decomp_setup(); putstr("Uncompressing Linux..."); diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7c16f8a2b738..184899808ee7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -103,6 +103,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac56u.dtb \ bcm4708-asus-rt-ac68u.dtb \ bcm4708-buffalo-wzr-1750dhp.dtb \ + bcm4708-buffalo-wzr-1166dhp.dtb \ + bcm4708-buffalo-wzr-1166dhp2.dtb \ bcm4708-linksys-ea6300-v1.dtb \ bcm4708-linksys-ea6500-v2.dtb \ bcm4708-luxul-xap-1510.dtb \ @@ -179,6 +181,8 @@ dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2q-marvell-dmp.dtb dtb-$(CONFIG_ARCH_BRCMSTB) += \ bcm7445-bcm97445svmb.dtb +dtb-$(CONFIG_ARCH_BCMBCA) += \ + bcm947622.dtb dtb-$(CONFIG_ARCH_CLPS711X) += \ ep7211-edb7211.dtb dtb-$(CONFIG_ARCH_DAVINCI) += \ @@ -255,6 +259,8 @@ dtb-$(CONFIG_ARCH_HISI) += \ hi3519-demb.dtb dtb-$(CONFIG_ARCH_HIX5HD2) += \ hisi-x5hd2-dkb.dtb +dtb-$(CONFIG_ARCH_HPE_GXP) += \ + hpe-bmc-dl360gen10.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += \ integratorap.dtb \ integratorap-im-pd1.dtb \ @@ -458,8 +464,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-aristainetos_7.dtb \ imx6dl-aristainetos2_4.dtb \ imx6dl-aristainetos2_7.dtb \ + imx6dl-colibri-aster.dtb \ imx6dl-colibri-eval-v3.dtb \ - imx6dl-colibri-v1_1-eval-v3.dtb \ + imx6dl-colibri-iris.dtb \ + imx6dl-colibri-iris-v2.dtb \ imx6dl-cubox-i.dtb \ imx6dl-cubox-i-emmc-som-v15.dtb \ imx6dl-cubox-i-som-v15.dtb \ @@ -547,6 +555,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-b450v3.dtb \ imx6q-b650v3.dtb \ imx6q-b850v3.dtb \ + imx6q-bosch-acc.dtb \ imx6q-cm-fx6.dtb \ imx6q-cubox-i.dtb \ imx6q-cubox-i-emmc-som-v15.dtb \ @@ -690,6 +699,9 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-kontron-n6310-s.dtb \ imx6ul-kontron-n6310-s-43.dtb \ imx6ul-liteboard.dtb \ + imx6ul-tqma6ul1-mba6ulx.dtb \ + imx6ul-tqma6ul2-mba6ulx.dtb \ + imx6ul-tqma6ul2l-mba6ulx.dtb \ imx6ul-opos6uldev.dtb \ imx6ul-pico-dwarf.dtb \ imx6ul-pico-hobbit.dtb \ @@ -701,15 +713,28 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-tx6ul-0011.dtb \ imx6ul-tx6ul-mainboard.dtb \ imx6ull-14x14-evk.dtb \ + imx6ull-colibri-aster.dtb \ + imx6ull-colibri-emmc-aster.dtb \ imx6ull-colibri-emmc-eval-v3.dtb \ + imx6ull-colibri-emmc-iris.dtb \ + imx6ull-colibri-emmc-iris-v2.dtb \ imx6ull-colibri-eval-v3.dtb \ + imx6ull-colibri-iris.dtb \ + imx6ull-colibri-iris-v2.dtb \ + imx6ull-colibri-wifi-aster.dtb \ imx6ull-colibri-wifi-eval-v3.dtb \ + imx6ull-colibri-wifi-iris.dtb \ + imx6ull-colibri-wifi-iris-v2.dtb \ imx6ull-jozacp.dtb \ imx6ull-myir-mys-6ulx-eval.dtb \ imx6ull-opos6uldev.dtb \ imx6ull-phytec-segin-ff-rdk-nand.dtb \ imx6ull-phytec-segin-ff-rdk-emmc.dtb \ imx6ull-phytec-segin-lc-rdk-nand.dtb \ + imx6ull-phytec-tauri-emmc.dtb \ + imx6ull-phytec-tauri-nand.dtb \ + imx6ull-tqma6ull2-mba6ulx.dtb \ + imx6ull-tqma6ull2l-mba6ulx.dtb \ imx6ulz-14x14-evk.dtb \ imx6ulz-bsh-smm-m2.dtb dtb-$(CONFIG_SOC_IMX7D) += \ @@ -732,6 +757,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-sdb.dtb \ imx7d-sdb-reva.dtb \ imx7d-sdb-sht11.dtb \ + imx7d-smegw01.dtb \ imx7d-zii-rmu2.dtb \ imx7d-zii-rpu2.dtb \ imx7s-colibri-aster.dtb \ @@ -741,9 +767,14 @@ dtb-$(CONFIG_SOC_IMX7D) += \ dtb-$(CONFIG_SOC_IMX7ULP) += \ imx7ulp-com.dtb \ imx7ulp-evk.dtb +dtb-$(CONFIG_SOC_IMXRT) += \ + imxrt1050-evk.dtb dtb-$(CONFIG_SOC_LAN966) += \ - lan966x-pcb8291.dtb + lan966x-pcb8291.dtb \ + lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \ + lan966x-kontron-kswitch-d10-mmt-8g.dtb dtb-$(CONFIG_SOC_LS1021A) += \ + ls1021a-iot.dtb \ ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ ls1021a-tsn.dtb \ @@ -977,11 +1008,12 @@ dtb-$(CONFIG_ARCH_OXNAS) += \ ox820-cloudengines-pogoplug-series-3.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8016-sbc.dtb \ + qcom-apq8026-asus-sparrow.dtb \ qcom-apq8026-lg-lenok.dtb \ qcom-apq8060-dragonboard.dtb \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ - qcom-apq8064-sony-xperia-yuga.dtb \ + qcom-apq8064-sony-xperia-lagan-yuga.dtb \ qcom-apq8064-asus-nexus7-flo.dtb \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ @@ -1000,12 +1032,12 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8660-surf.dtb \ qcom-msm8916-samsung-serranove.dtb \ qcom-msm8960-cdp.dtb \ - qcom-msm8974-fairphone-fp2.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ - qcom-msm8974-samsung-klte.dtb \ - qcom-msm8974-sony-xperia-amami.dtb \ - qcom-msm8974-sony-xperia-castor.dtb \ - qcom-msm8974-sony-xperia-honami.dtb \ + qcom-msm8974-sony-xperia-rhine-amami.dtb \ + qcom-msm8974-sony-xperia-rhine-honami.dtb \ + qcom-msm8974pro-fairphone-fp2.dtb \ + qcom-msm8974pro-samsung-klte.dtb \ + qcom-msm8974pro-sony-xperia-shinano-castor.dtb \ qcom-mdm9615-wp8548-mangoh-green.dtb \ qcom-sdx55-mtp.dtb \ qcom-sdx55-t55.dtb \ @@ -1156,10 +1188,14 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32h743i-disco.dtb \ stm32h750i-art-pi.dtb \ stm32mp135f-dk.dtb \ + stm32mp151a-prtt1a.dtb \ + stm32mp151a-prtt1c.dtb \ + stm32mp151a-prtt1s.dtb \ stm32mp153c-dhcom-drc02.dtb \ stm32mp157a-avenger96.dtb \ stm32mp157a-dhcor-avenger96.dtb \ stm32mp157a-dk1.dtb \ + stm32mp157a-dk1-scmi.dtb \ stm32mp157a-iot-box.dtb \ stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \ stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \ @@ -1170,9 +1206,12 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp157c-dhcom-pdk2.dtb \ stm32mp157c-dhcom-picoitx.dtb \ stm32mp157c-dk2.dtb \ + stm32mp157c-dk2-scmi.dtb \ stm32mp157c-ed1.dtb \ + stm32mp157c-ed1-scmi.dtb \ stm32mp157c-emsbc-argon.dtb \ stm32mp157c-ev1.dtb \ + stm32mp157c-ev1-scmi.dtb \ stm32mp157c-lxa-mc1.dtb \ stm32mp157c-odyssey.dtb dtb-$(CONFIG_MACH_SUN4I) += \ @@ -1382,6 +1421,7 @@ dtb-$(CONFIG_ARCH_U8500) += \ ste-ux500-samsung-janice.dtb \ ste-ux500-samsung-gavini.dtb \ ste-ux500-samsung-codina.dtb \ + ste-ux500-samsung-codina-tmo.dtb \ ste-ux500-samsung-skomer.dtb \ ste-ux500-samsung-kyle.dtb dtb-$(CONFIG_ARCH_UNIPHIER) += \ @@ -1546,6 +1586,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-lenovo-hr630.dtb \ aspeed-bmc-lenovo-hr855xg2.dtb \ aspeed-bmc-microsoft-olympus.dtb \ + aspeed-bmc-nuvia-dc-scm.dtb \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-mihawk.dtb \ aspeed-bmc-opp-mowgli.dtb \ diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index 366702630290..d3eafee79a23 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -285,7 +285,7 @@ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <912500>; - regulator-max-microvolt = <1312500>; + regulator-max-microvolt = <1351500>; regulator-boot-on; regulator-always-on; }; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 56ae5095a5b8..02e04a12a270 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -405,3 +405,7 @@ &pruss_tm { status = "okay"; }; + +&wkup_m3_ipc { + firmware-name = "am335x-bone-scale-data.bin"; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 659e99eabe66..b9745a2f0e4d 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -782,3 +782,7 @@ &pruss_tm { status = "okay"; }; + +&wkup_m3_ipc { + firmware-name = "am335x-evm-scale-data.bin"; +}; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index a2db65538e51..9c458e5a95b7 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -719,3 +719,7 @@ &pruss_tm { status = "okay"; }; + +&wkup_m3_ipc { + firmware-name = "am335x-evm-scale-data.bin"; +}; diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts index 1918766c1f80..1a7e187b1953 100644 --- a/arch/arm/boot/dts/am335x-guardian.dts +++ b/arch/arm/boot/dts/am335x-guardian.dts @@ -29,39 +29,44 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - gpio_keys { + guardian_buttons: gpio-keys { + pinctrl-names = "default"; + pinctrl-0 = <&guardian_button_pins>; compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pins>; - button21 { + select-button { + label = "guardian-select-button"; + linux,code = <KEY_5>; + gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + power-button { label = "guardian-power-button"; linux,code = <KEY_POWER>; - gpios = <&gpio2 21 0>; + gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; wakeup-source; }; }; - leds { - compatible = "gpio-leds"; + guardian_leds: gpio-leds { pinctrl-names = "default"; - pinctrl-0 = <&leds_pins>; + pinctrl-0 = <&guardian_led_pins>; + compatible = "gpio-leds"; - led1 { - label = "green:heartbeat"; - gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + life-led { + label = "guardian:life-led"; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; + }; - led2 { - label = "green:mmc0"; - gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; }; panel { @@ -100,20 +105,36 @@ }; - pwm7: dmtimer-pwm { + guardian_beeper: dmtimer-pwm@7 { compatible = "ti,omap-dmtimer-pwm"; ti,timers = <&timer7>; pinctrl-names = "default"; - pinctrl-0 = <&dmtimer7_pins>; + pinctrl-0 = <&guardian_beeper_pins>; ti,clock-source = <0x01>; }; - vmmcsd_fixed: regulator-3v3 { + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + mt_keypad: mt_keypad@0 { + compatible = "gpio-mt-keypad"; + debounce-delay-ms = <10>; + col-scan-delay-us = <2>; + keypad,num-lines = <5>; + linux,no-autorepeat; + gpio-activelow; + line-gpios = < + &gpio1 24 GPIO_ACTIVE_LOW /*gpio_56*/ + &gpio1 23 GPIO_ACTIVE_LOW /*gpio_55*/ + &gpio1 22 GPIO_ACTIVE_LOW /*gpio_54*/ + &gpio1 20 GPIO_ACTIVE_LOW /*gpio_52*/ + &gpio1 16 GPIO_ACTIVE_LOW /*gpio_48*/ + >; + }; }; &elm { @@ -133,28 +154,29 @@ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ + ti,nand-xfer-type = "prefetch-dma"; ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; gpmc,device-width = <1>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <44>; - gpmc,cs-wr-off-ns = <44>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <34>; - gpmc,adv-wr-off-ns = <44>; + gpmc,cs-rd-off-ns = <30>; + gpmc,cs-wr-off-ns = <30>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <30>; + gpmc,adv-wr-off-ns = <30>; gpmc,we-on-ns = <0>; - gpmc,we-off-ns = <40>; - gpmc,oe-on-ns = <0>; - gpmc,oe-off-ns = <54>; - gpmc,access-ns = <64>; - gpmc,rd-cycle-ns = <82>; - gpmc,wr-cycle-ns = <82>; + gpmc,we-off-ns = <15>; + gpmc,oe-on-ns = <1>; + gpmc,oe-off-ns = <15>; + gpmc,access-ns = <30>; + gpmc,rd-cycle-ns = <30>; + gpmc,wr-cycle-ns = <30>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wr-access-ns = <40>; + gpmc,wr-access-ns = <0>; gpmc,wr-data-mux-bus-ns = <0>; /* @@ -198,18 +220,33 @@ }; partition@6 { - label = "u-boot-env"; - reg = <0x300000 0x40000>; + label = "u-boot-2"; + reg = <0x300000 0x100000>; }; partition@7 { - label = "u-boot-env.backup1"; - reg = <0x340000 0x40000>; + label = "u-boot-2.backup1"; + reg = <0x400000 0x100000>; }; partition@8 { + label = "u-boot-env"; + reg = <0x500000 0x40000>; + }; + + partition@9 { + label = "u-boot-env.backup1"; + reg = <0x540000 0x40000>; + }; + + partition@10 { + label = "splash-screen"; + reg = <0x580000 0x40000>; + }; + + partition@11 { label = "UBI"; - reg = <0x380000 0x1fc80000>; + reg = <0x5c0000 0x1fa40000>; }; }; }; @@ -228,6 +265,11 @@ &lcdc { blue-and-red-wiring = "crossed"; status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <0>; + }; + }; }; &mmc1 { @@ -242,7 +284,6 @@ &rtc { clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; - system-power-controller; }; &spi0 { @@ -255,14 +296,34 @@ #include "tps65217.dtsi" &tps { + /* + * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only + * mode") at poweroff. Most BeagleBone versions do not support RTC-only + * mode and risk hardware damage if this mode is entered. + * + * For details, see linux-omap mailing list May 2015 thread + * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller + * In particular, messages: + * http://www.spinics.net/lists/linux-omap/msg118585.html + * http://www.spinics.net/lists/linux-omap/msg118615.html + * + * You can override this later with + * &tps { /delete-property/ ti,pmic-shutdown-controller; } + * if you want to use RTC-only mode and made sure you are not affected + * by the hardware problems. (Tip: double-check by performing a current + * measurement after shutdown: it should be less than 1 mA.) + */ ti,pmic-shutdown-controller; interrupt-parent = <&intc>; interrupts = <7>; /* NMI */ backlight { isel = <1>; /* 1 - ISET1, 2 ISET2 */ - fdim = <100>; /* TPS65217_BL_FDIM_100HZ */ - default-brightness = <100>; + fdim = <500>; /* TPS65217_BL_FDIM_500HZ */ + default-brightness = <50>; + /* 1(on) - enable current sink, while initialization */ + /* 0(off) - disable current sink, while initialization */ + isink-en = <1>; }; regulators { @@ -272,6 +333,7 @@ }; dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; regulator-max-microvolt = <1351500>; @@ -280,6 +342,7 @@ }; dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; regulator-max-microvolt = <1150000>; @@ -319,171 +382,364 @@ }; }; +&gpio0 { + gpio-line-names = + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "MirxWakeup", + "", + ""; +}; + +&gpio3 { + ti,gpio-always-on; + ti,no-reset-on-init; + gpio-line-names = + "", + "MirxBtReset", + "", + "CcVolAdcEn", + "MirxBlePause", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AspEn", + "", + "", + "", + "", + "", + "", + "BatVolAdcEn", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins>; status = "okay"; }; +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + &usb0 { dr_mode = "peripheral"; }; &usb1 { dr_mode = "host"; + /delete-property/dmas; + /delete-property/dma-names; }; &am33xx_pinmux { pinctrl-names = "default"; - pinctrl-0 = <&clkout2_pin &gpio_pins>; + pinctrl-0 = <&clkout2_pin &guardian_interface_pins>; clkout2_pin: pinmux_clkout2_pin { pinctrl-single,pins = < + /* xdma_event_intr1.clkout2 */ AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) >; }; - dmtimer7_pins: pinmux_dmtimer7_pins { + guardian_interface_pins: pinmux_interface_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) + /* ADC_BATSENSE_EN */ + /* (A14) MCASP0_AHCLKx.gpio3[21] */ + AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) + /* ADC_COINCELL_EN */ + /* (J16) MII1_TX_EN.gpio3[3] */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) + /* ASP_ENABLE */ + /* (A13) MCASP0_ACLKx.gpio3[14] */ + AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLUP | MUX_MODE7) + /* (D16) uart1_rxd.uart1_rxd */ + AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE7) + /* (D15) uart1_txd.uart1_txd */ + AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE7) + /*SWITCH-OFF_3V6*/ + /* (M18) gpio0[1] */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE7) + /* MIRACULIX */ + /* (H17) gmii1_crs.gpio3[1] */ + AM33XX_IOPAD(0x90c, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) + /* (H18) rmii1_refclk.gpio0[29] */ + AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) + /* (J18) gmii1_txd3.gpio0[16] */ + AM33XX_IOPAD(0x91c, PIN_INPUT | MUX_MODE7 ) + /* (J17) gmii1_rxdv.gpio3[4] */ + AM33XX_IOPAD(0x918, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) >; }; - gpio_keys_pins: pinmux_gpio_keys_pins { + guardian_beeper_pins: pinmux_dmtimer7_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) + AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) /* (E18) timer7 */ >; }; - gpio_pins: pinmux_gpio_pins { + guardian_button_pins: pinmux_guardian_button_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */ + AM33XX_IOPAD(0x884, PIN_INPUT | MUX_MODE7) /* (V9) gpmc_csn2.gpio1[31] */ >; }; + i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + led_bl_pins: gpio_led_bl_pins { + pinctrl-single,pins = < + /* P9_14, gpmc_a[2].GPIO1[18] (backlight control) */ + AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7) >; }; lcd_disen_pins: pinmux_lcd_disen_pins { pinctrl-single,pins = < + /* P9_27, mcasp0_fsr.gpio3[19] (lcd_disen) */ AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7) >; }; lcd_pins_default: pinmux_lcd_pins_default { pinctrl-single,pins = < + /* (U10) gpmc_ad8.lcd_data23 */ AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (T10) gpmc_ad9.lcd_data22 */ AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (T11) gpmc_ad10.lcd_data21 */ AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (U12) gpmc_ad11.lcd_data20 */ AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (T12) gpmc_ad12.lcd_data19 */ AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (R12) gpmc_ad13.lcd_data18 */ AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (V13) gpmc_ad14.lcd_data17 */ AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (U13) gpmc_ad15.lcd_data16 */ AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* lcd_data0.lcd_data0 */ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data1.lcd_data1 */ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data2.lcd_data2 */ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data3.lcd_data3 */ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data4.lcd_data4 */ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data5.lcd_data5 */ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data6.lcd_data6 */ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data7.lcd_data7 */ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data8.lcd_data8 */ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data9.lcd_data9 */ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data10.lcd_data10 */ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data11.lcd_data11 */ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data12.lcd_data12 */ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data13.lcd_data13 */ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data14.lcd_data14 */ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data15.lcd_data15 */ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_vsync.lcd_vsync */ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_hsync.lcd_hsync */ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_pclk.lcd_pclk */ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_ac_bias_en.lcd_ac_bias_en */ AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) >; }; lcd_pins_sleep: pinmux_lcd_pins_sleep { pinctrl-single,pins = < + /* lcd_data0.lcd_data0 */ AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data1.lcd_data1 */ AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data2.lcd_data2 */ AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data3.lcd_data3 */ AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data4.lcd_data4 */ AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data5.lcd_data5 */ AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data6.lcd_data6 */ AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data7.lcd_data7 */ AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data8.lcd_data8 */ AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data9.lcd_data9 */ AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data10.lcd_data10 */ AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data11.lcd_data11 */ AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data12.lcd_data12 */ AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data13.lcd_data13 */ AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data14.lcd_data14 */ AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data15.lcd_data15 */ AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_vsync.lcd_vsync */ AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_hsync.lcd_hsync */ AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_pclk.lcd_pclk */ AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_ac_bias_en.lcd_ac_bias_en */ AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) >; }; - leds_pins: pinmux_leds_pins { + guardian_led_pins: pinmux_guardian_led_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x86c, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) /* (T16) gpmc_a10.gpio1[26] */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ >; }; spi0_pins: pinmux_spi0_pins { pinctrl-single,pins = < + /* SPI0_CLK - spi0_clk.spi */ AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* SPI0_MOSI - spi0_d0.spi0 */ AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0) + /* SPI0_MISO - spi0_d1.spi0 */ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) + /* SPI0_CS0 - spi */ AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0) >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < + /* uart0_rxd.uart0_rxd */ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) + /* uart0_txd.uart0_txd */ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) >; }; + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + /* K18 uart2_rxd.mirx_txd */ + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1) + /* L18 uart2_txd.mirx_rxd */ + AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1) + >; + }; + nandflash_pins: pinmux_nandflash_pins { pinctrl-single,pins = < + /* (U7) gpmc_ad0.gpmc_ad0 */ AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0) + /* (V7) gpmc_ad1.gpmc_ad1 */ AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0) + /* (R8) gpmc_ad2.gpmc_ad2 */ AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0) + /* (T8) gpmc_ad3.gpmc_ad3 */ AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) + /* (U8) gpmc_ad4.gpmc_ad4 */ AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0) + /* (V8) gpmc_ad5.gpmc_ad5 */ AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0) + /* (R9) gpmc_ad6.gpmc_ad6 */ AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0) + /* (T9) gpmc_ad7.gpmc_ad7 */ AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) + /* (T17) gpmc_wait0.gpmc_wait0 */ AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0) + /* (U17) gpmc_wpn.gpmc_wpn */ AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0) + /* (V6) gpmc_csn0.gpmc_csn0 */ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) + /* (R7) gpmc_advn_ale.gpmc_advn_ale */ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) + /* (T7) gpmc_oen_ren.gpmc_oen_ren */ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) + /* (U6) gpmc_wen.gpmc_wen */ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) + /* (T6) gpmc_be0n_cle.gpmc_be0n_cle */ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) >; }; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi index 11e8f64b6606..92a0e98ec231 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi +++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi @@ -182,7 +182,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - m25p80@0 { + flash@0 { compatible = "mx25l6405d"; spi-max-frequency = <40000000>; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi index a7269b90d795..e7e439a0630a 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi +++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi @@ -394,7 +394,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - m25p80@0 { + flash@0 { compatible = "mx25l6405d"; spi-max-frequency = <40000000>; diff --git a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi index 245c35f41cdf..6eea18b29355 100644 --- a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi +++ b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi @@ -27,6 +27,13 @@ reg = <0x80000000 0x10000000>; }; + clk32k: clk32k { + compatible = "fixed-clock"; + clock-frequency = <32768>; + + #clock-cells = <0>; + }; + vdd_mod: vdd_mod_reg { compatible = "regulator-fixed"; regulator-name = "vdd-mod"; @@ -124,9 +131,6 @@ gpmc,wr-data-mux-bus-ns = <0>; ti,elm-id = <&elm>; ti,nand-ecc-opt = "bch8"; - - #address-cells = <1>; - #size-cells = <1>; }; }; @@ -149,6 +153,8 @@ }; &rtc { + clocks = <&clk32k>; + clock-names = "ext-clk"; system-power-controller; }; diff --git a/arch/arm/boot/dts/am335x-myirtech-myd.dts b/arch/arm/boot/dts/am335x-myirtech-myd.dts index 1479fd95dec2..9d81d4cc6890 100644 --- a/arch/arm/boot/dts/am335x-myirtech-myd.dts +++ b/arch/arm/boot/dts/am335x-myirtech-myd.dts @@ -227,14 +227,20 @@ }; &nand0 { - partition@0 { - label = "MLO"; - reg = <0x00000 0x20000>; - }; + nand_parts: partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; - partition@20000 { - label = "boot"; - reg = <0x20000 0x80000>; + partition@0 { + label = "MLO"; + reg = <0x00000 0x20000>; + }; + + partition@80000 { + label = "boot"; + reg = <0x80000 0x100000>; + }; }; }; diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index f65cd1331315..e2cec1ffaa4c 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -331,7 +331,7 @@ pinctrl-0 = <&spi0_pins>; status = "okay"; - serial_flash: m25p80@0 { + serial_flash: flash@0 { compatible = "jedec,spi-nor"; spi-max-frequency = <48000000>; reg = <0x0>; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index 6516907ed579..73b5d1a024bd 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -588,7 +588,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - flash: n25q032@1 { + flash: flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q032"; diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi index b7b7106f2dee..d34483ae1778 100644 --- a/arch/arm/boot/dts/am33xx-clocks.dtsi +++ b/arch/arm/boot/dts/am33xx-clocks.dtsi @@ -5,251 +5,288 @@ * Copyright (C) 2013 Texas Instruments, Inc. */ &scm_clocks { - sys_clkin_ck: sys_clkin_ck@40 { + sys_clkin_ck: clock-sys-clkin-22@40 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_clkin_ck"; clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; ti,bit-shift = <22>; reg = <0x0040>; }; - adc_tsc_fck: adc_tsc_fck { + adc_tsc_fck: clock-adc-tsc-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "adc_tsc_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - dcan0_fck: dcan0_fck { + dcan0_fck: clock-dcan0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dcan0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - dcan1_fck: dcan1_fck { + dcan1_fck: clock-dcan1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dcan1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - mcasp0_fck: mcasp0_fck { + mcasp0_fck: clock-mcasp0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mcasp0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - mcasp1_fck: mcasp1_fck { + mcasp1_fck: clock-mcasp1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mcasp1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - smartreflex0_fck: smartreflex0_fck { + smartreflex0_fck: clock-smartreflex0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "smartreflex0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - smartreflex1_fck: smartreflex1_fck { + smartreflex1_fck: clock-smartreflex1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "smartreflex1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - sha0_fck: sha0_fck { + sha0_fck: clock-sha0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "sha0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - aes0_fck: aes0_fck { + aes0_fck: clock-aes0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "aes0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - rng_fck: rng_fck { + rng_fck: clock-rng-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "rng_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l4ls_gclk>; - ti,bit-shift = <0>; - reg = <0x0664>; - }; + clock@664 { + compatible = "ti,clksel"; + reg = <0x664>; + #clock-cells = <2>; + #address-cells = <0>; - ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l4ls_gclk>; - ti,bit-shift = <1>; - reg = <0x0664>; - }; + ehrpwm0_tbclk: clock-ehrpwm0-tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm0_tbclk"; + clocks = <&l4ls_gclk>; + ti,bit-shift = <0>; + }; - ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l4ls_gclk>; - ti,bit-shift = <2>; - reg = <0x0664>; + ehrpwm1_tbclk: clock-ehrpwm1-tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm1_tbclk"; + clocks = <&l4ls_gclk>; + ti,bit-shift = <1>; + }; + + ehrpwm2_tbclk: clock-ehrpwm2-tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm2_tbclk"; + clocks = <&l4ls_gclk>; + ti,bit-shift = <2>; + }; }; }; &prcm_clocks { - clk_32768_ck: clk_32768_ck { + clk_32768_ck: clock-clk-32768 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_32768_ck"; clock-frequency = <32768>; }; - clk_rc32k_ck: clk_rc32k_ck { + clk_rc32k_ck: clock-clk-rc32k { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_rc32k_ck"; clock-frequency = <32000>; }; - virt_19200000_ck: virt_19200000_ck { + virt_19200000_ck: clock-virt-19200000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_19200000_ck"; clock-frequency = <19200000>; }; - virt_24000000_ck: virt_24000000_ck { + virt_24000000_ck: clock-virt-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_24000000_ck"; clock-frequency = <24000000>; }; - virt_25000000_ck: virt_25000000_ck { + virt_25000000_ck: clock-virt-25000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_25000000_ck"; clock-frequency = <25000000>; }; - virt_26000000_ck: virt_26000000_ck { + virt_26000000_ck: clock-virt-26000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_26000000_ck"; clock-frequency = <26000000>; }; - tclkin_ck: tclkin_ck { + tclkin_ck: clock-tclkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "tclkin_ck"; clock-frequency = <12000000>; }; - dpll_core_ck: dpll_core_ck@490 { + dpll_core_ck: clock@490 { #clock-cells = <0>; compatible = "ti,am3-dpll-core-clock"; + clock-output-names = "dpll_core_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0490>, <0x045c>, <0x0468>, <0x0460>, <0x0464>; }; - dpll_core_x2_ck: dpll_core_x2_ck { + dpll_core_x2_ck: clock-dpll-core-x2 { #clock-cells = <0>; compatible = "ti,am3-dpll-x2-clock"; + clock-output-names = "dpll_core_x2_ck"; clocks = <&dpll_core_ck>; }; - dpll_core_m4_ck: dpll_core_m4_ck@480 { + dpll_core_m4_ck: clock-dpll-core-m4@480 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m4_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; reg = <0x0480>; ti,index-starts-at-one; }; - dpll_core_m5_ck: dpll_core_m5_ck@484 { + dpll_core_m5_ck: clock-dpll-core-m5@484 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m5_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; reg = <0x0484>; ti,index-starts-at-one; }; - dpll_core_m6_ck: dpll_core_m6_ck@4d8 { + dpll_core_m6_ck: clock-dpll-core-m6@4d8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m6_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; reg = <0x04d8>; ti,index-starts-at-one; }; - dpll_mpu_ck: dpll_mpu_ck@488 { + dpll_mpu_ck: clock@488 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; + clock-output-names = "dpll_mpu_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0488>, <0x0420>, <0x042c>, <0x0424>, <0x0428>; }; - dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a8 { + dpll_mpu_m2_ck: clock-dpll-mpu-m2@4a8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_mpu_m2_ck"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; reg = <0x04a8>; ti,index-starts-at-one; }; - dpll_ddr_ck: dpll_ddr_ck@494 { + dpll_ddr_ck: clock@494 { #clock-cells = <0>; compatible = "ti,am3-dpll-no-gate-clock"; + clock-output-names = "dpll_ddr_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0494>, <0x0434>, <0x0440>, <0x0438>, <0x043c>; }; - dpll_ddr_m2_ck: dpll_ddr_m2_ck@4a0 { + dpll_ddr_m2_ck: clock-dpll-ddr-m2@4a0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_ddr_m2_ck"; clocks = <&dpll_ddr_ck>; ti,max-div = <31>; reg = <0x04a0>; ti,index-starts-at-one; }; - dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck { + dpll_ddr_m2_div2_ck: clock-dpll-ddr-m2-div2 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_ddr_m2_div2_ck"; clocks = <&dpll_ddr_m2_ck>; clock-mult = <1>; clock-div = <2>; }; - dpll_disp_ck: dpll_disp_ck@498 { + dpll_disp_ck: clock@498 { #clock-cells = <0>; compatible = "ti,am3-dpll-no-gate-clock"; + clock-output-names = "dpll_disp_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>; }; - dpll_disp_m2_ck: dpll_disp_m2_ck@4a4 { + dpll_disp_m2_ck: clock-dpll-disp-m2@4a4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_disp_m2_ck"; clocks = <&dpll_disp_ck>; ti,max-div = <31>; reg = <0x04a4>; @@ -257,418 +294,484 @@ ti,set-rate-parent; }; - dpll_per_ck: dpll_per_ck@48c { + dpll_per_ck: clock@48c { #clock-cells = <0>; compatible = "ti,am3-dpll-no-gate-j-type-clock"; + clock-output-names = "dpll_per_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x048c>, <0x0470>, <0x049c>, <0x0474>, <0x0478>; }; - dpll_per_m2_ck: dpll_per_m2_ck@4ac { + dpll_per_m2_ck: clock-dpll-per-m2@4ac { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2_ck"; clocks = <&dpll_per_ck>; ti,max-div = <31>; reg = <0x04ac>; ti,index-starts-at-one; }; - dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck { + dpll_per_m2_div4_wkupdm_ck: clock-dpll-per-m2-div4-wkupdm { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_per_m2_div4_wkupdm_ck"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; }; - dpll_per_m2_div4_ck: dpll_per_m2_div4_ck { + dpll_per_m2_div4_ck: clock-dpll-per-m2-div4 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_per_m2_div4_ck"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; }; - clk_24mhz: clk_24mhz { + clk_24mhz: clock-clk-24mhz { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "clk_24mhz"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <8>; }; - clkdiv32k_ck: clkdiv32k_ck { + clkdiv32k_ck: clock-clkdiv32k { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "clkdiv32k_ck"; clocks = <&clk_24mhz>; clock-mult = <1>; clock-div = <732>; }; - l3_gclk: l3_gclk { + l3_gclk: clock-l3-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l3_gclk"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - pruss_ocp_gclk: pruss_ocp_gclk@530 { + pruss_ocp_gclk: clock-pruss-ocp-gclk@530 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "pruss_ocp_gclk"; clocks = <&l3_gclk>, <&dpll_disp_m2_ck>; reg = <0x0530>; }; - mmu_fck: mmu_fck@914 { + mmu_fck: clock-mmu-fck-1@914 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "mmu_fck"; clocks = <&dpll_core_m4_ck>; ti,bit-shift = <1>; reg = <0x0914>; }; - timer1_fck: timer1_fck@528 { + timer1_fck: clock-timer1-fck@528 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer1_fck"; clocks = <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>; reg = <0x0528>; }; - timer2_fck: timer2_fck@508 { + timer2_fck: clock-timer2-fck@508 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer2_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0508>; }; - timer3_fck: timer3_fck@50c { + timer3_fck: clock-timer3-fck@50c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer3_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x050c>; }; - timer4_fck: timer4_fck@510 { + timer4_fck: clock-timer4-fck@510 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer4_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0510>; }; - timer5_fck: timer5_fck@518 { + timer5_fck: clock-timer5-fck@518 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer5_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0518>; }; - timer6_fck: timer6_fck@51c { + timer6_fck: clock-timer6-fck@51c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer6_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x051c>; }; - timer7_fck: timer7_fck@504 { + timer7_fck: clock-timer7-fck@504 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer7_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0504>; }; - usbotg_fck: usbotg_fck@47c { + usbotg_fck: clock-usbotg-fck-8@47c { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usbotg_fck"; clocks = <&dpll_per_ck>; ti,bit-shift = <8>; reg = <0x047c>; }; - dpll_core_m4_div2_ck: dpll_core_m4_div2_ck { + dpll_core_m4_div2_ck: clock-dpll-core-m4-div2 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_core_m4_div2_ck"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <2>; }; - ieee5000_fck: ieee5000_fck@e4 { + ieee5000_fck: clock-ieee5000-fck-1@e4 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ieee5000_fck"; clocks = <&dpll_core_m4_div2_ck>; ti,bit-shift = <1>; reg = <0x00e4>; }; - wdt1_fck: wdt1_fck@538 { + wdt1_fck: clock-wdt1-fck@538 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "wdt1_fck"; clocks = <&clk_rc32k_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0538>; }; - l4_rtc_gclk: l4_rtc_gclk { + l4_rtc_gclk: clock-l4-rtc-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4_rtc_gclk"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <2>; }; - l4hs_gclk: l4hs_gclk { + l4hs_gclk: clock-l4hs-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4hs_gclk"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - l3s_gclk: l3s_gclk { + l3s_gclk: clock-l3s-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l3s_gclk"; clocks = <&dpll_core_m4_div2_ck>; clock-mult = <1>; clock-div = <1>; }; - l4fw_gclk: l4fw_gclk { + l4fw_gclk: clock-l4fw-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4fw_gclk"; clocks = <&dpll_core_m4_div2_ck>; clock-mult = <1>; clock-div = <1>; }; - l4ls_gclk: l4ls_gclk { + l4ls_gclk: clock-l4ls-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4ls_gclk"; clocks = <&dpll_core_m4_div2_ck>; clock-mult = <1>; clock-div = <1>; }; - sysclk_div_ck: sysclk_div_ck { + sysclk_div_ck: clock-sysclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "sysclk_div_ck"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - cpsw_125mhz_gclk: cpsw_125mhz_gclk { + cpsw_125mhz_gclk: clock-cpsw-125mhz-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "cpsw_125mhz_gclk"; clocks = <&dpll_core_m5_ck>; clock-mult = <1>; clock-div = <2>; }; - cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@520 { + cpsw_cpts_rft_clk: clock-cpsw-cpts-rft@520 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "cpsw_cpts_rft_clk"; clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>; reg = <0x0520>; }; - gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@53c { + gpio0_dbclk_mux_ck: clock-gpio0-dbclk-mux@53c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpio0_dbclk_mux_ck"; clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x053c>; }; - lcd_gclk: lcd_gclk@534 { + lcd_gclk: clock-lcd-gclk@534 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "lcd_gclk"; clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>; reg = <0x0534>; ti,set-rate-parent; }; - mmc_clk: mmc_clk { + mmc_clk: clock-mmc { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mmc_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <2>; }; - gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@52c { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>; - ti,bit-shift = <1>; - reg = <0x052c>; - }; + clock@52c { + compatible = "ti,clksel"; + reg = <0x52c>; + #clock-cells = <2>; + #address-cells = <0>; - gfx_fck_div_ck: gfx_fck_div_ck@52c { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&gfx_fclk_clksel_ck>; - reg = <0x052c>; - ti,max-div = <2>; - }; + gfx_fclk_clksel_ck: clock-gfx-fclk-clksel { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "gfx_fclk_clksel_ck"; + clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>; + ti,bit-shift = <1>; + }; - sysclkout_pre_ck: sysclkout_pre_ck@700 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>; - reg = <0x0700>; + gfx_fck_div_ck: clock-gfx-fck-div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "gfx_fck_div_ck"; + clocks = <&gfx_fclk_clksel_ck>; + ti,max-div = <2>; + }; }; - clkout2_div_ck: clkout2_div_ck@700 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&sysclkout_pre_ck>; - ti,bit-shift = <3>; - ti,max-div = <8>; - reg = <0x0700>; - }; + clock@700 { + compatible = "ti,clksel"; + reg = <0x700>; + #clock-cells = <2>; + #address-cells = <0>; - clkout2_ck: clkout2_ck@700 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkout2_div_ck>; - ti,bit-shift = <7>; - reg = <0x0700>; + sysclkout_pre_ck: clock-sysclkout-pre { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "sysclkout_pre_ck"; + clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>; + }; + + clkout2_div_ck: clock-clkout2-div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "clkout2_div_ck"; + clocks = <&sysclkout_pre_ck>; + ti,bit-shift = <3>; + ti,max-div = <8>; + }; + + clkout2_ck: clock-clkout2 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "clkout2_ck"; + clocks = <&clkout2_div_ck>; + ti,bit-shift = <7>; + }; }; }; &prcm { - per_cm: per-cm@0 { + per_cm: clock@0 { compatible = "ti,omap4-cm"; + clock-output-names = "per_cm"; reg = <0x0 0x400>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x0 0x400>; - l4ls_clkctrl: l4ls-clkctrl@38 { + l4ls_clkctrl: clock@38 { compatible = "ti,clkctrl"; + clock-output-names = "l4ls_clkctrl"; reg = <0x38 0x2c>, <0x6c 0x28>, <0xac 0xc>, <0xc0 0x1c>, <0xec 0xc>, <0x10c 0x8>, <0x130 0x4>; #clock-cells = <2>; }; - l3s_clkctrl: l3s-clkctrl@1c { + l3s_clkctrl: clock@1c { compatible = "ti,clkctrl"; + clock-output-names = "l3s_clkctrl"; reg = <0x1c 0x4>, <0x30 0x8>, <0x68 0x4>, <0xf8 0x4>; #clock-cells = <2>; }; - l3_clkctrl: l3-clkctrl@24 { + l3_clkctrl: clock@24 { compatible = "ti,clkctrl"; + clock-output-names = "l3_clkctrl"; reg = <0x24 0xc>, <0x94 0x10>, <0xbc 0x4>, <0xdc 0x8>, <0xfc 0x8>; #clock-cells = <2>; }; - l4hs_clkctrl: l4hs-clkctrl@120 { + l4hs_clkctrl: clock@120 { compatible = "ti,clkctrl"; + clock-output-names = "l4hs_clkctrl"; reg = <0x120 0x4>; #clock-cells = <2>; }; - pruss_ocp_clkctrl: pruss-ocp-clkctrl@e8 { + pruss_ocp_clkctrl: clock@e8 { compatible = "ti,clkctrl"; + clock-output-names = "pruss_ocp_clkctrl"; reg = <0xe8 0x4>; #clock-cells = <2>; }; - cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@0 { + cpsw_125mhz_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "cpsw_125mhz_clkctrl"; reg = <0x0 0x18>; #clock-cells = <2>; }; - lcdc_clkctrl: lcdc-clkctrl@18 { + lcdc_clkctrl: clock@18 { compatible = "ti,clkctrl"; + clock-output-names = "lcdc_clkctrl"; reg = <0x18 0x4>; #clock-cells = <2>; }; - clk_24mhz_clkctrl: clk-24mhz-clkctrl@14c { + clk_24mhz_clkctrl: clock@14c { compatible = "ti,clkctrl"; + clock-output-names = "clk_24mhz_clkctrl"; reg = <0x14c 0x4>; #clock-cells = <2>; }; }; - wkup_cm: wkup-cm@400 { + wkup_cm: clock@400 { compatible = "ti,omap4-cm"; + clock-output-names = "wkup_cm"; reg = <0x400 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x400 0x100>; - l4_wkup_clkctrl: l4-wkup-clkctrl@0 { + l4_wkup_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "l4_wkup_clkctrl"; reg = <0x0 0x10>, <0xb4 0x24>; #clock-cells = <2>; }; - l3_aon_clkctrl: l3-aon-clkctrl@14 { + l3_aon_clkctrl: clock@14 { compatible = "ti,clkctrl"; + clock-output-names = "l3_aon_clkctrl"; reg = <0x14 0x4>; #clock-cells = <2>; }; - l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@b0 { + l4_wkup_aon_clkctrl: clock@b0 { compatible = "ti,clkctrl"; + clock-output-names = "l4_wkup_aon_clkctrl"; reg = <0xb0 0x4>; #clock-cells = <2>; }; }; - mpu_cm: mpu-cm@600 { + mpu_cm: clock@600 { compatible = "ti,omap4-cm"; + clock-output-names = "mpu_cm"; reg = <0x600 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x600 0x100>; - mpu_clkctrl: mpu-clkctrl@0 { + mpu_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "mpu_clkctrl"; reg = <0x0 0x8>; #clock-cells = <2>; }; }; - l4_rtc_cm: l4-rtc-cm@800 { + l4_rtc_cm: clock@800 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_rtc_cm"; reg = <0x800 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x800 0x100>; - l4_rtc_clkctrl: l4-rtc-clkctrl@0 { + l4_rtc_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "l4_rtc_clkctrl"; reg = <0x0 0x4>; #clock-cells = <2>; }; }; - gfx_l3_cm: gfx-l3-cm@900 { + gfx_l3_cm: clock@900 { compatible = "ti,omap4-cm"; + clock-output-names = "gfx_l3_cm"; reg = <0x900 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x900 0x100>; - gfx_l3_clkctrl: gfx-l3-clkctrl@0 { + gfx_l3_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "gfx_l3_clkctrl"; reg = <0x0 0x8>; #clock-cells = <2>; }; }; - l4_cefuse_cm: l4-cefuse-cm@a00 { + l4_cefuse_cm: clock@a00 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_cefuse_cm"; reg = <0xa00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xa00 0x100>; - l4_cefuse_clkctrl: l4-cefuse-clkctrl@0 { + l4_cefuse_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "l4_cefuse_clkctrl"; reg = <0x0 0x24>; #clock-cells = <2>; }; diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index c9629cb5ccd1..7da42a5b959c 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -263,6 +263,8 @@ compatible = "ti,am3359-tscadc"; reg = <0x0 0x1000>; interrupts = <16>; + clocks = <&adc_tsc_fck>; + clock-names = "fck"; status = "disabled"; dmas = <&edma 53 0>, <&edma 57 0>; dma-names = "fifo0", "fifo1"; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index f6ec85d58dd1..9a8698bd2852 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -461,8 +461,11 @@ interrupts = <17>; interrupt-names = "glue"; #dma-cells = <2>; + /* For backwards compatibility: */ #dma-channels = <30>; + dma-channels = <30>; #dma-requests = <256>; + dma-requests = <256>; }; }; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 0d2fac98ce7d..c8b80f156ec9 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -161,6 +161,8 @@ /* HS USB Host PHY on PORT 1 */ hsusb1_phy: hsusb1_phy { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_rst_pins>; compatible = "usb-nop-xceiv"; reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */ #phy-cells = <0>; @@ -168,7 +170,9 @@ }; &davinci_emac { - status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <ðernet_pins>; + status = "okay"; }; &davinci_mdio { @@ -193,6 +197,8 @@ }; &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; /* User DIP swithes [1:8] / User LEDS [1:2] */ tca6416: gpio@21 { @@ -205,6 +211,8 @@ }; &i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; clock-frequency = <400000>; }; @@ -223,6 +231,8 @@ }; &usbhshost { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_pins>; port1-mode = "ehci-phy"; }; @@ -231,8 +241,35 @@ }; &omap3_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb1_rst_pins>; + + ethernet_pins: pinmux_ethernet_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */ + OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */ + OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */ + OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */ + OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */ + OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */ + OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */ + OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */ + OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */ + OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + >; + }; leds_pins: pinmux_leds_pins { pinctrl-single,pins = < @@ -300,8 +337,6 @@ }; &omap3_pmx_core2 { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb1_pins>; hsusb1_pins: pinmux_hsusb1_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi index 8b669e2eafec..f7b680f6c48a 100644 --- a/arch/arm/boot/dts/am3517-som.dtsi +++ b/arch/arm/boot/dts/am3517-som.dtsi @@ -69,6 +69,8 @@ }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; s35390a: s35390a@30 { @@ -179,6 +181,13 @@ &omap3_pmx_core { + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */ diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi index 220d0a52797e..0ee7afaa0e8e 100644 --- a/arch/arm/boot/dts/am35xx-clocks.dtsi +++ b/arch/arm/boot/dts/am35xx-clocks.dtsi @@ -62,12 +62,27 @@ }; }; &cm_clocks { - ipss_ick: ipss_ick@a10 { - #clock-cells = <0>; - compatible = "ti,am35xx-interface-clock"; - clocks = <&core_l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <4>; + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; + + ipss_ick: clock-ipss-ick { + #clock-cells = <0>; + compatible = "ti,am35xx-interface-clock"; + clock-output-names = "ipss_ick"; + clocks = <&core_l3_ick>; + ti,bit-shift = <4>; + }; + + uart4_ick_am35xx: clock-uart4-ick-am35xx { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "uart4_ick_am35xx"; + clocks = <&core_l4_ick>; + ti,bit-shift = <23>; + }; }; rmii_ck: rmii_ck { @@ -82,20 +97,19 @@ clock-frequency = <27000000>; }; - uart4_ick_am35xx: uart4_ick_am35xx@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <23>; - }; + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; - uart4_fck_am35xx: uart4_fck_am35xx@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <23>; + uart4_fck_am35xx: clock-uart4-fck-am35xx { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "uart4_fck_am35xx"; + clocks = <&core_48m_fck>; + ti,bit-shift = <23>; + }; }; }; diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts index 9423e9feaa10..c9323d1df303 100644 --- a/arch/arm/boot/dts/am3874-iceboard.dts +++ b/arch/arm/boot/dts/am3874-iceboard.dts @@ -434,7 +434,7 @@ }; &mcspi1 { - s25fl256@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts index 3e3354780db8..0861e868b75a 100644 --- a/arch/arm/boot/dts/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -302,7 +302,7 @@ &edma 17 0>; dma-names = "tx0", "rx0"; - flash: w25q64cvzpig@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 4416ddb559e4..46d5361fe876 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -1127,6 +1127,11 @@ cpu0-supply = <&dcdc2>; }; +&wkup_m3_ipc { + ti,set-io-isolation; + firmware-name = "am43x-evm-scale-data.bin"; +}; + &pruss1_mdio { status = "disabled"; }; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 53f64e3ce735..5a74b83145cf 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -437,7 +437,7 @@ pinctrl-1 = <&qspi_pins_sleep>; spi-max-frequency = <48000000>; - m25p80@0 { + flash@0 { compatible = "mx66l51235l"; spi-max-frequency = <48000000>; reg = <0>; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 20a34d2d85df..036f3831dc26 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -746,7 +746,7 @@ pinctrl-0 = <&qspi_pins>; spi-max-frequency = <48000000>; - m25p80@0 { + flash@0 { compatible = "mx66l51235l"; spi-max-frequency = <48000000>; reg = <0>; @@ -893,6 +893,10 @@ }; }; +&wkup_m3_ipc { + firmware-name = "am43x-evm-scale-data.bin"; +}; + &pruss1_mdio { status = "disabled"; }; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 4f9a7251a107..27f4ce855549 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -902,7 +902,7 @@ pinctrl-1 = <&qspi1_pins_sleep>; spi-max-frequency = <48000000>; - m25p80@0 { + flash@0 { compatible = "mx66l51235l"; spi-max-frequency = <48000000>; reg = <0>; @@ -1019,6 +1019,10 @@ cpu0-supply = <&dcdc2>; }; +&wkup_m3_ipc { + firmware-name = "am43x-evm-scale-data.bin"; +}; + &pruss1_mdio { status = "disabled"; }; diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index 66e892fa3398..9a5437b3d6a8 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -5,217 +5,246 @@ * Copyright (C) 2013 Texas Instruments, Inc. */ &scm_clocks { - sys_clkin_ck: sys_clkin_ck@40 { + sys_clkin_ck: clock-sys-clkin-31@40 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_clkin_ck"; clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>; ti,bit-shift = <31>; reg = <0x0040>; }; - crystal_freq_sel_ck: crystal_freq_sel_ck@40 { + crystal_freq_sel_ck: clock-crystal-freq-sel-29@40 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "crystal_freq_sel_ck"; clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; ti,bit-shift = <29>; reg = <0x0040>; }; - sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 { + sysboot_freq_sel_ck: clock-sysboot-freq-sel-22@44e10040 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sysboot_freq_sel_ck"; clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; ti,bit-shift = <22>; reg = <0x0040>; }; - adc_tsc_fck: adc_tsc_fck { + adc_tsc_fck: clock-adc-tsc-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "adc_tsc_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - dcan0_fck: dcan0_fck { + dcan0_fck: clock-dcan0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dcan0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - dcan1_fck: dcan1_fck { + dcan1_fck: clock-dcan1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dcan1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - mcasp0_fck: mcasp0_fck { + mcasp0_fck: clock-mcasp0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mcasp0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - mcasp1_fck: mcasp1_fck { + mcasp1_fck: clock-mcasp1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mcasp1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - smartreflex0_fck: smartreflex0_fck { + smartreflex0_fck: clock-smartreflex0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "smartreflex0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - smartreflex1_fck: smartreflex1_fck { + smartreflex1_fck: clock-smartreflex1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "smartreflex1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - sha0_fck: sha0_fck { + sha0_fck: clock-sha0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "sha0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - aes0_fck: aes0_fck { + aes0_fck: clock-aes0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "aes0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - rng_fck: rng_fck { + rng_fck: clock-rng-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "rng_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - ehrpwm0_tbclk: ehrpwm0_tbclk@664 { + ehrpwm0_tbclk: clock-ehrpwm0-tbclk-0@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm0_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <0>; reg = <0x0664>; }; - ehrpwm1_tbclk: ehrpwm1_tbclk@664 { + ehrpwm1_tbclk: clock-ehrpwm1-tbclk-1@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm1_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <1>; reg = <0x0664>; }; - ehrpwm2_tbclk: ehrpwm2_tbclk@664 { + ehrpwm2_tbclk: clock-ehrpwm2-tbclk-2@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm2_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <2>; reg = <0x0664>; }; - ehrpwm3_tbclk: ehrpwm3_tbclk@664 { + ehrpwm3_tbclk: clock-ehrpwm3-tbclk-4@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm3_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <4>; reg = <0x0664>; }; - ehrpwm4_tbclk: ehrpwm4_tbclk@664 { + ehrpwm4_tbclk: clock-ehrpwm4-tbclk-5@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm4_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <5>; reg = <0x0664>; }; - ehrpwm5_tbclk: ehrpwm5_tbclk@664 { + ehrpwm5_tbclk: clock-ehrpwm5-tbclk-6@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm5_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <6>; reg = <0x0664>; }; }; &prcm_clocks { - clk_32768_ck: clk_32768_ck { + clk_32768_ck: clock-clk-32768 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_32768_ck"; clock-frequency = <32768>; }; - clk_rc32k_ck: clk_rc32k_ck { + clk_rc32k_ck: clock-clk-rc32k { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_rc32k_ck"; clock-frequency = <32768>; }; - virt_19200000_ck: virt_19200000_ck { + virt_19200000_ck: clock-virt-19200000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_19200000_ck"; clock-frequency = <19200000>; }; - virt_24000000_ck: virt_24000000_ck { + virt_24000000_ck: clock-virt-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_24000000_ck"; clock-frequency = <24000000>; }; - virt_25000000_ck: virt_25000000_ck { + virt_25000000_ck: clock-virt-25000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_25000000_ck"; clock-frequency = <25000000>; }; - virt_26000000_ck: virt_26000000_ck { + virt_26000000_ck: clock-virt-26000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_26000000_ck"; clock-frequency = <26000000>; }; - tclkin_ck: tclkin_ck { + tclkin_ck: clock-tclkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "tclkin_ck"; clock-frequency = <26000000>; }; - dpll_core_ck: dpll_core_ck@2d20 { + dpll_core_ck: clock@2d20 { #clock-cells = <0>; compatible = "ti,am3-dpll-core-clock"; + clock-output-names = "dpll_core_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2d20>, <0x2d24>, <0x2d2c>, <0x2d48>, <0x2d4c>; }; - dpll_core_x2_ck: dpll_core_x2_ck { + dpll_core_x2_ck: clock-dpll-core-x2 { #clock-cells = <0>; compatible = "ti,am3-dpll-x2-clock"; + clock-output-names = "dpll_core_x2_ck"; clocks = <&dpll_core_ck>; }; - dpll_core_m4_ck: dpll_core_m4_ck@2d38 { + dpll_core_m4_ck: clock-dpll-core-m4-8@2d38 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m4_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -224,9 +253,10 @@ ti,invert-autoidle-bit; }; - dpll_core_m5_ck: dpll_core_m5_ck@2d3c { + dpll_core_m5_ck: clock-dpll-core-m5-8@2d3c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m5_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -235,9 +265,10 @@ ti,invert-autoidle-bit; }; - dpll_core_m6_ck: dpll_core_m6_ck@2d40 { + dpll_core_m6_ck: clock-dpll-core-m6-8@2d40 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m6_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -246,16 +277,18 @@ ti,invert-autoidle-bit; }; - dpll_mpu_ck: dpll_mpu_ck@2d60 { + dpll_mpu_ck: clock@2d60 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; + clock-output-names = "dpll_mpu_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2d60>, <0x2d64>, <0x2d6c>, <0x2d88>, <0x2d8c>; }; - dpll_mpu_m2_ck: dpll_mpu_m2_ck@2d70 { + dpll_mpu_m2_ck: clock-dpll-mpu-m2-8@2d70 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_mpu_m2_ck"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -264,24 +297,27 @@ ti,invert-autoidle-bit; }; - mpu_periphclk: mpu_periphclk { + mpu_periphclk: clock-mpu-periphclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mpu_periphclk"; clocks = <&dpll_mpu_m2_ck>; clock-mult = <1>; clock-div = <2>; }; - dpll_ddr_ck: dpll_ddr_ck@2da0 { + dpll_ddr_ck: clock@2da0 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; + clock-output-names = "dpll_ddr_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2da0>, <0x2da4>, <0x2dac>, <0x2dc8>, <0x2dcc>; }; - dpll_ddr_m2_ck: dpll_ddr_m2_ck@2db0 { + dpll_ddr_m2_ck: clock-dpll-ddr-m2-8@2db0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_ddr_m2_ck"; clocks = <&dpll_ddr_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -290,16 +326,18 @@ ti,invert-autoidle-bit; }; - dpll_disp_ck: dpll_disp_ck@2e20 { + dpll_disp_ck: clock@2e20 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; + clock-output-names = "dpll_disp_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2e20>, <0x2e24>, <0x2e2c>, <0x2e48>, <0x2e4c>; }; - dpll_disp_m2_ck: dpll_disp_m2_ck@2e30 { + dpll_disp_m2_ck: clock-dpll-disp-m2-8@2e30 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_disp_m2_ck"; clocks = <&dpll_disp_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -309,16 +347,18 @@ ti,set-rate-parent; }; - dpll_per_ck: dpll_per_ck@2de0 { + dpll_per_ck: clock@2de0 { #clock-cells = <0>; compatible = "ti,am3-dpll-j-type-clock"; + clock-output-names = "dpll_per_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2de0>, <0x2de4>, <0x2dec>, <0x2e08>, <0x2e0c>; }; - dpll_per_m2_ck: dpll_per_m2_ck@2df0 { + dpll_per_m2_ck: clock-dpll-per-m2-8@2df0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2_ck"; clocks = <&dpll_per_ck>; ti,max-div = <127>; ti,autoidle-shift = <8>; @@ -327,119 +367,135 @@ ti,invert-autoidle-bit; }; - dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck { + dpll_per_m2_div4_wkupdm_ck: clock-dpll-per-m2-div4-wkupdm { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_per_m2_div4_wkupdm_ck"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; }; - dpll_per_m2_div4_ck: dpll_per_m2_div4_ck { + dpll_per_m2_div4_ck: clock-dpll-per-m2-div4 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_per_m2_div4_ck"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; }; - clk_24mhz: clk_24mhz { + clk_24mhz: clock-clk-24mhz { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "clk_24mhz"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <8>; }; - clkdiv32k_ck: clkdiv32k_ck { + clkdiv32k_ck: clock-clkdiv32k { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "clkdiv32k_ck"; clocks = <&clk_24mhz>; clock-mult = <1>; clock-div = <732>; }; - clkdiv32k_ick: clkdiv32k_ick@2a38 { + clkdiv32k_ick: clock-clkdiv32k-ick-8@2a38 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "clkdiv32k_ick"; clocks = <&clkdiv32k_ck>; ti,bit-shift = <8>; reg = <0x2a38>; }; - sysclk_div: sysclk_div { + sysclk_div: clock-sysclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "sysclk_div"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - pruss_ocp_gclk: pruss_ocp_gclk@4248 { + pruss_ocp_gclk: clock-pruss-ocp-gclk@4248 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "pruss_ocp_gclk"; clocks = <&sysclk_div>, <&dpll_disp_m2_ck>; reg = <0x4248>; }; - clk_32k_tpm_ck: clk_32k_tpm_ck { + clk_32k_tpm_ck: clock-clk-32k-tpm { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_32k_tpm_ck"; clock-frequency = <32768>; }; - timer1_fck: timer1_fck@4200 { + timer1_fck: clock-timer1-fck@4200 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer1_fck"; clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>; reg = <0x4200>; }; - timer2_fck: timer2_fck@4204 { + timer2_fck: clock-timer2-fck@4204 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer2_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4204>; }; - timer3_fck: timer3_fck@4208 { + timer3_fck: clock-timer3-fck@4208 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer3_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4208>; }; - timer4_fck: timer4_fck@420c { + timer4_fck: clock-timer4-fck@420c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer4_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x420c>; }; - timer5_fck: timer5_fck@4210 { + timer5_fck: clock-timer5-fck@4210 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer5_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4210>; }; - timer6_fck: timer6_fck@4214 { + timer6_fck: clock-timer6-fck@4214 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer6_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4214>; }; - timer7_fck: timer7_fck@4218 { + timer7_fck: clock-timer7-fck@4218 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer7_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4218>; }; - wdt1_fck: wdt1_fck@422c { + wdt1_fck: clock-wdt1-fck@422c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "wdt1_fck"; clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>; reg = <0x422c>; }; @@ -451,125 +507,141 @@ reg = <0x424c>; }; - l3_gclk: l3_gclk { + l3_gclk: clock-l3-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l3_gclk"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_core_m4_div2_ck: dpll_core_m4_div2_ck { + dpll_core_m4_div2_ck: clock-dpll-core-m4-div2 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_core_m4_div2_ck"; clocks = <&sysclk_div>; clock-mult = <1>; clock-div = <2>; }; - l4hs_gclk: l4hs_gclk { + l4hs_gclk: clock-l4hs-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4hs_gclk"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - l3s_gclk: l3s_gclk { + l3s_gclk: clock-l3s-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l3s_gclk"; clocks = <&dpll_core_m4_div2_ck>; clock-mult = <1>; clock-div = <1>; }; - l4ls_gclk: l4ls_gclk { + l4ls_gclk: clock-l4ls-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4ls_gclk"; clocks = <&dpll_core_m4_div2_ck>; clock-mult = <1>; clock-div = <1>; }; - cpsw_125mhz_gclk: cpsw_125mhz_gclk { + cpsw_125mhz_gclk: clock-cpsw-125mhz-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "cpsw_125mhz_gclk"; clocks = <&dpll_core_m5_ck>; clock-mult = <1>; clock-div = <2>; }; - cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@4238 { + cpsw_cpts_rft_clk: clock-cpsw-cpts-rft@4238 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "cpsw_cpts_rft_clk"; clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>; reg = <0x4238>; }; - dpll_clksel_mac_clk: dpll_clksel_mac_clk@4234 { + dpll_clksel_mac_clk: clock-dpll-clksel-mac-2@4234 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_clksel_mac_clk"; clocks = <&dpll_core_m5_ck>; reg = <0x4234>; ti,bit-shift = <2>; ti,dividers = <2>, <5>; }; - clk_32k_mosc_ck: clk_32k_mosc_ck { + clk_32k_mosc_ck: clock-clk-32k-mosc { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_32k_mosc_ck"; clock-frequency = <32768>; }; - gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@4240 { + gpio0_dbclk_mux_ck: clock-gpio0-dbclk-mux@4240 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpio0_dbclk_mux_ck"; clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>; reg = <0x4240>; }; - mmc_clk: mmc_clk { + mmc_clk: clock-mmc { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mmc_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <2>; }; - gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@423c { + gfx_fclk_clksel_ck: clock-gfx-fclk-clksel-1@423c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gfx_fclk_clksel_ck"; clocks = <&sysclk_div>, <&dpll_per_m2_ck>; ti,bit-shift = <1>; reg = <0x423c>; }; - gfx_fck_div_ck: gfx_fck_div_ck@423c { + gfx_fck_div_ck: clock-gfx-fck-div@423c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "gfx_fck_div_ck"; clocks = <&gfx_fclk_clksel_ck>; reg = <0x423c>; ti,max-div = <2>; }; - disp_clk: disp_clk@4244 { + disp_clk: clock-disp@4244 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "disp_clk"; clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>; reg = <0x4244>; ti,set-rate-parent; }; - dpll_extdev_ck: dpll_extdev_ck@2e60 { + dpll_extdev_ck: clock@2e60 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; + clock-output-names = "dpll_extdev_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2e60>, <0x2e64>, <0x2e6c>, <0x2e88>, <0x2e8c>; }; - dpll_extdev_m2_ck: dpll_extdev_m2_ck@2e70 { + dpll_extdev_m2_ck: clock-dpll-extdev-m2-8@2e70 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_extdev_m2_ck"; clocks = <&dpll_extdev_ck>; ti,max-div = <127>; ti,autoidle-shift = <8>; @@ -578,66 +650,75 @@ ti,invert-autoidle-bit; }; - mux_synctimer32k_ck: mux_synctimer32k_ck@4230 { + mux_synctimer32k_ck: clock-mux-synctimer32k@4230 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "mux_synctimer32k_ck"; clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>; reg = <0x4230>; }; - timer8_fck: timer8_fck@421c { + timer8_fck: clock-timer8-fck@421c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer8_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; reg = <0x421c>; }; - timer9_fck: timer9_fck@4220 { + timer9_fck: clock-timer9-fck@4220 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer9_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; reg = <0x4220>; }; - timer10_fck: timer10_fck@4224 { + timer10_fck: clock-timer10-fck@4224 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer10_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; reg = <0x4224>; }; - timer11_fck: timer11_fck@4228 { + timer11_fck: clock-timer11-fck@4228 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer11_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; reg = <0x4228>; }; - cpsw_50m_clkdiv: cpsw_50m_clkdiv { + cpsw_50m_clkdiv: clock-cpsw-50m-clkdiv { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "cpsw_50m_clkdiv"; clocks = <&dpll_core_m5_ck>; clock-mult = <1>; clock-div = <1>; }; - cpsw_5m_clkdiv: cpsw_5m_clkdiv { + cpsw_5m_clkdiv: clock-cpsw-5m-clkdiv { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "cpsw_5m_clkdiv"; clocks = <&cpsw_50m_clkdiv>; clock-mult = <1>; clock-div = <10>; }; - dpll_ddr_x2_ck: dpll_ddr_x2_ck { + dpll_ddr_x2_ck: clock-dpll-ddr-x2 { #clock-cells = <0>; compatible = "ti,am3-dpll-x2-clock"; + clock-output-names = "dpll_ddr_x2_ck"; clocks = <&dpll_ddr_ck>; }; - dpll_ddr_m4_ck: dpll_ddr_m4_ck@2db8 { + dpll_ddr_m4_ck: clock-dpll-ddr-m4-8@2db8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_ddr_m4_ck"; clocks = <&dpll_ddr_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -646,9 +727,10 @@ ti,invert-autoidle-bit; }; - dpll_per_clkdcoldo: dpll_per_clkdcoldo@2e14 { + dpll_per_clkdcoldo: clock-dpll-per-clkdcoldo-8@2e14 { #clock-cells = <0>; compatible = "ti,fixed-factor-clock"; + clock-output-names = "dpll_per_clkdcoldo"; clocks = <&dpll_per_ck>; ti,clock-mult = <1>; ti,clock-div = <1>; @@ -657,91 +739,102 @@ ti,invert-autoidle-bit; }; - dll_aging_clk_div: dll_aging_clk_div@4250 { + dll_aging_clk_div: clock-dll-aging-clk-div@4250 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dll_aging_clk_div"; clocks = <&sys_clkin_ck>; reg = <0x4250>; ti,dividers = <8>, <16>, <32>; }; - div_core_25m_ck: div_core_25m_ck { + div_core_25m_ck: clock-div-core-25m { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "div_core_25m_ck"; clocks = <&sysclk_div>; clock-mult = <1>; clock-div = <8>; }; - func_12m_clk: func_12m_clk { + func_12m_clk: clock-func-12m { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_12m_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <16>; }; - vtp_clk_div: vtp_clk_div { + vtp_clk_div: clock-vtp-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "vtp_clk_div"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <2>; }; - usbphy_32khz_clkmux: usbphy_32khz_clkmux@4260 { + usbphy_32khz_clkmux: clock-usbphy-32khz-clkmux@4260 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "usbphy_32khz_clkmux"; clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>; reg = <0x4260>; }; - usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k@2a40 { + usb_phy0_always_on_clk32k: clock-usb-phy0-always-on-clk32k-8@2a40 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy0_always_on_clk32k"; clocks = <&usbphy_32khz_clkmux>; ti,bit-shift = <8>; reg = <0x2a40>; }; - usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@2a48 { + usb_phy1_always_on_clk32k: clock-usb-phy1-always-on-clk32k-8@2a48 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy1_always_on_clk32k"; clocks = <&usbphy_32khz_clkmux>; ti,bit-shift = <8>; reg = <0x2a48>; }; - clkout1_osc_div_ck: clkout1-osc-div-ck { + clkout1_osc_div_ck: clock-clkout1-osc-div-ck { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "clkout1_osc_div_ck"; clocks = <&sys_clkin_ck>; ti,bit-shift = <20>; ti,max-div = <4>; reg = <0x4100>; }; - clkout1_src2_mux_ck: clkout1-src2-mux-ck { + clkout1_src2_mux_ck: clock-clkout1-src2-mux-ck { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "clkout1_src2_mux_ck"; clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>, <&dpll_mpu_m2_ck>; reg = <0x4100>; }; - clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck { + clkout1_src2_pre_div_ck: clock-clkout1-src2-pre-div-ck { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "clkout1_src2_pre_div_ck"; clocks = <&clkout1_src2_mux_ck>; ti,bit-shift = <4>; ti,max-div = <8>; reg = <0x4100>; }; - clkout1_src2_post_div_ck: clkout1-src2-post-div-ck { + clkout1_src2_post_div_ck: clock-clkout1-src2-post-div-ck { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "clkout1_src2_post_div_ck"; clocks = <&clkout1_src2_pre_div_ck>; ti,bit-shift = <8>; ti,max-div = <32>; @@ -749,18 +842,20 @@ reg = <0x4100>; }; - clkout1_mux_ck: clkout1-mux-ck { + clkout1_mux_ck: clock-clkout1-mux-ck { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "clkout1_mux_ck"; clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>, <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>; ti,bit-shift = <16>; reg = <0x4100>; }; - clkout1_ck: clkout1-ck { + clkout1_ck: clock-clkout1-ck { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "clkout1_ck"; clocks = <&clkout1_mux_ck>; ti,bit-shift = <23>; reg = <0x4100>; @@ -768,120 +863,138 @@ }; &prcm { - wkup_cm: wkup-cm@2800 { + wkup_cm: clock@2800 { compatible = "ti,omap4-cm"; + clock-output-names = "wkup_cm"; reg = <0x2800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x2800 0x400>; - l3s_tsc_clkctrl: l3s-tsc-clkctrl@120 { + l3s_tsc_clkctrl: clock@120 { compatible = "ti,clkctrl"; + clock-output-names = "l3s_tsc_clkctrl"; reg = <0x120 0x4>; #clock-cells = <2>; }; - l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@228 { + l4_wkup_aon_clkctrl: clock@228 { compatible = "ti,clkctrl"; + clock-output-names = "l4_wkup_aon_clkctrl"; reg = <0x228 0xc>; #clock-cells = <2>; }; - l4_wkup_clkctrl: l4-wkup-clkctrl@220 { + l4_wkup_clkctrl: clock@220 { compatible = "ti,clkctrl"; + clock-output-names = "l4_wkup_clkctrl"; reg = <0x220 0x4>, <0x328 0x44>; #clock-cells = <2>; }; }; - mpu_cm: mpu-cm@8300 { + mpu_cm: clock@8300 { compatible = "ti,omap4-cm"; + clock-output-names = "mpu_cm"; reg = <0x8300 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8300 0x100>; - mpu_clkctrl: mpu-clkctrl@20 { + mpu_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "mpu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - gfx_l3_cm: gfx-l3-cm@8400 { + gfx_l3_cm: clock@8400 { compatible = "ti,omap4-cm"; + clock-output-names = "gfx_l3_cm"; reg = <0x8400 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8400 0x100>; - gfx_l3_clkctrl: gfx-l3-clkctrl@20 { + gfx_l3_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "gfx_l3_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - l4_rtc_cm: l4-rtc-cm@8500 { + l4_rtc_cm: clock@8500 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_rtc_cm"; reg = <0x8500 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8500 0x100>; - l4_rtc_clkctrl: l4-rtc-clkctrl@20 { + l4_rtc_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4_rtc_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - per_cm: per-cm@8800 { + per_cm: clock@8800 { compatible = "ti,omap4-cm"; + clock-output-names = "per_cm"; reg = <0x8800 0xc00>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8800 0xc00>; - l3_clkctrl: l3-clkctrl@20 { + l3_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_clkctrl"; reg = <0x20 0x3c>, <0x78 0x2c>; #clock-cells = <2>; }; - l3s_clkctrl: l3s-clkctrl@68 { + l3s_clkctrl: clock@68 { compatible = "ti,clkctrl"; + clock-output-names = "l3s_clkctrl"; reg = <0x68 0xc>, <0x220 0x4c>; #clock-cells = <2>; }; - pruss_ocp_clkctrl: pruss-ocp-clkctrl@320 { + pruss_ocp_clkctrl: clock@320 { compatible = "ti,clkctrl"; + clock-output-names = "pruss_ocp_clkctrl"; reg = <0x320 0x4>; #clock-cells = <2>; }; - l4ls_clkctrl: l4ls-clkctrl@420 { + l4ls_clkctrl: clock@420 { compatible = "ti,clkctrl"; + clock-output-names = "l4ls_clkctrl"; reg = <0x420 0x1a4>; #clock-cells = <2>; }; - emif_clkctrl: emif-clkctrl@720 { + emif_clkctrl: clock@720 { compatible = "ti,clkctrl"; + clock-output-names = "emif_clkctrl"; reg = <0x720 0x4>; #clock-cells = <2>; }; - dss_clkctrl: dss-clkctrl@a20 { + dss_clkctrl: clock@a20 { compatible = "ti,clkctrl"; + clock-output-names = "dss_clkctrl"; reg = <0xa20 0x4>; #clock-cells = <2>; }; - cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@b20 { + cpsw_125mhz_clkctrl: clock@b20 { compatible = "ti,clkctrl"; + clock-output-names = "cpsw_125mhz_clkctrl"; reg = <0xb20 0x4>; #clock-cells = <2>; }; diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts index 6dff3660bf09..47b9174d2353 100644 --- a/arch/arm/boot/dts/am574x-idk.dts +++ b/arch/arm/boot/dts/am574x-idk.dts @@ -18,7 +18,7 @@ &qspi { spi-max-frequency = <96000000>; - m25p80@0 { + flash@0 { spi-max-frequency = <96000000>; }; }; diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 2e94f32d9dfc..2fc9a5d5e0c0 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -491,7 +491,7 @@ spi-max-frequency = <48000000>; - spi_flash: spi_flash@0 { + spi_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spansion,m25p80", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 9fcb8944aa3e..c06eda817242 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -526,7 +526,7 @@ status = "okay"; spi-max-frequency = <76800000>; - m25p80@0 { + flash@0 { compatible = "s25fl256s1", "jedec,spi-nor"; spi-max-frequency = <76800000>; reg = <0>; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 77261a2fb949..a7dc4c04d10b 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -203,7 +203,7 @@ pinctrl-names = "default"; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "mx25l25635e", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi index a624b2371fb6..0abac5ffe45a 100644 --- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi @@ -159,7 +159,7 @@ pinctrl-0 = <&spi0_pins2>; pinctrl-names = "default"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; /* MX25L8006E */ diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index 64f2ce254fb6..e72b8ed4b997 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -258,7 +258,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q064", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 0e679465cbb5..4c4092790a20 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -64,7 +64,7 @@ status = "disabled"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "n25q128a13", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts index 0a961116a1f9..396172067f6a 100644 --- a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts +++ b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts @@ -242,7 +242,7 @@ pinctrl-names = "default"; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-385-atl-x530.dts b/arch/arm/boot/dts/armada-385-atl-x530.dts index ed3f41c7df71..241f5d7c80e9 100644 --- a/arch/arm/boot/dts/armada-385-atl-x530.dts +++ b/arch/arm/boot/dts/armada-385-atl-x530.dts @@ -168,7 +168,7 @@ pinctrl-0 = <&spi1_pins>; status = "okay"; - spi-flash@1 { + flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi index 624bbcae68c0..10ad46f29393 100644 --- a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi +++ b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi @@ -365,7 +365,7 @@ pinctrl-names = "default"; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <0>; compatible = "w25q32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts index 7881df3b28a0..389d9c75d546 100644 --- a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts +++ b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts @@ -126,7 +126,7 @@ pinctrl-0 = <&spi1_pins>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index 0e4613bb56ee..332f8fce77dc 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -192,7 +192,7 @@ pinctrl-0 = <&spi1_pins>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p128", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts index d8769956cbfc..2622af73c9da 100644 --- a/arch/arm/boot/dts/armada-385-synology-ds116.dts +++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts @@ -223,7 +223,7 @@ pinctrl-0 = <&spi0_pins>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "macronix,mx25l6405d", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index f240018148f6..f4878df39753 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -348,7 +348,11 @@ #size-cells = <0>; reg = <5>; - /* ATSHA204A at address 0x64 */ + /* ATSHA204A-MAHDA-T crypto module */ + crypto@64 { + compatible = "atmel,atsha204a"; + reg = <0x64>; + }; }; i2c@6 { @@ -485,7 +489,7 @@ pinctrl-0 = <&spi0_pins &spi0cs0_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "spansion,s25fl164k", "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index a2bec07bf4c5..5130eccc32af 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -133,7 +133,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "w25q32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index 9d873257ac45..e2ba50520b6b 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -395,7 +395,7 @@ pinctrl-0 = <&spi0_pins>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p128", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts index 328a4d6afd2c..c0efafd45b33 100644 --- a/arch/arm/boot/dts/armada-388-rd.dts +++ b/arch/arm/boot/dts/armada-388-rd.dts @@ -97,7 +97,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p128", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi index 363ac4238859..2c64bc6e5a17 100644 --- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi +++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi @@ -101,7 +101,7 @@ /* The microsom has an optional W25Q32 on board, connected to CS0 */ pinctrl-0 = <&spi1_pins>; - w25q32: spi-flash@0 { + w25q32: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "w25q32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts index 0e29474ae9a2..792d0a0184e8 100644 --- a/arch/arm/boot/dts/armada-390-db.dts +++ b/arch/arm/boot/dts/armada-390-db.dts @@ -81,7 +81,7 @@ pinctrl-0 = <&spi1_pins>; pinctrl-names = "default"; - spi-flash@1 { + flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "n25q128a13", diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts index fc28308e5bc5..ec6cdbeedde7 100644 --- a/arch/arm/boot/dts/armada-398-db.dts +++ b/arch/arm/boot/dts/armada-398-db.dts @@ -79,7 +79,7 @@ pinctrl-0 = <&spi1_pins>; pinctrl-names = "default"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <0>; compatible = "n25q128a13", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index 606fd3476a59..3e77b4337802 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -134,7 +134,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "n25q128a13", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts b/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts index a022c68dc943..c28e140b4afc 100644 --- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts +++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts @@ -15,7 +15,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi index 32fb21b2bf6a..47b003a81bd4 100644 --- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi +++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi @@ -80,7 +80,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts b/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts index 21f442afab1f..20ba5c823bb2 100644 --- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts +++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts @@ -15,7 +15,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi index f3e1a25ca5f2..cab99d8e2911 100644 --- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi +++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi @@ -80,7 +80,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts index e05aee6cdc04..2caa3980fdf6 100644 --- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts +++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts @@ -15,7 +15,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi index c8b1355ce15e..7028482ce4b2 100644 --- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi +++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi @@ -80,7 +80,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts index 8a3aa616bbd0..02bef8dc4270 100644 --- a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts +++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts @@ -93,7 +93,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p64"; diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts index 4ec0ae01b61d..d1b61dad0c46 100644 --- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts +++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts @@ -89,7 +89,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p64"; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 5d04dc68cf57..75318fd0fc11 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -235,7 +235,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p64", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index b4cca507cf13..d1d348b91c0a 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -220,7 +220,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "n25q128a13", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index 8480a16919a0..36932e3b781a 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -255,7 +255,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "everspin,mr25h256"; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index 809e821d7399..5551bac1962c 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -274,7 +274,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q064", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts index b7eb552640cb..5a6063bd4508 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -23,6 +23,26 @@ reg = <0x80000000 0x80000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + video_engine_memory: video { + size = <0x04000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + vcc_sdhci0: regulator-vcc-sdhci0 { compatible = "regulator-fixed"; regulator-name = "SDHCI0 Vcc"; @@ -103,7 +123,7 @@ &mac0 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; phy-handle = <ðphy0>; pinctrl-names = "default"; @@ -114,7 +134,7 @@ &mac1 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; phy-handle = <ðphy1>; pinctrl-names = "default"; @@ -300,3 +320,18 @@ vqmmc-supply = <&vccq_sdhci1>; clk-phase-sd-hs = <7>, <200>; }; + +&vhub { + status = "okay"; + pinctrl-names = "default"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts index e71ccfd1df63..ff4c07c69af1 100644 --- a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts +++ b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts @@ -100,12 +100,14 @@ lm25066@40 { compatible = "lm25066"; reg = <0x40>; + shunt-resistor-micro-ohms = <1000>; }; /* 12VSB PMIC */ lm25066@41 { compatible = "lm25066"; reg = <0x41>; + shunt-resistor-micro-ohms = <10000>; }; }; @@ -196,7 +198,7 @@ gpio-line-names = /* A */ "LOCATORLED_STATUS_N", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI", "", "", "", "", - /* B */ "DDR_MEM_TEMP", "", "", "", "", "", "", "", + /* B */ "POST_COMPLETE_N", "", "", "", "", "", "", "", /* C */ "", "", "", "", "PCIE_HP_SEL_N", "PCIE_SATA_SEL_N", "LOCATORBTN", "", /* D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON", "", "", "", "PSU_FAN_FAIL_N", diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts index eaf1bc261ee3..41d2b1535d9a 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts @@ -51,26 +51,6 @@ }; }; - spi2_gpio: spi2-gpio { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - - gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>; - gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>; - num-chipselects = <1>; - cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - m25p,fast-read; - label = "pnor"; - spi-max-frequency = <100000000>; - }; - }; - switchphy: ethernet-phy@0 { // Fixed link }; @@ -242,6 +222,19 @@ }; }; +&spi2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <50000000>; + }; +}; + &i2c0 { status = "okay"; ina230@45 { @@ -260,6 +253,17 @@ reg = <0x4f>; }; + sled1_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED1_SWD_MUX", "SLED1_XRES_SWD_N", + "SLED1_CLKREQ_N", "SLED1_PCIE_PWR_EN"; + }; + sled1_ioexp: pca9539@76 { compatible = "nxp,pca9539"; reg = <0x76>; @@ -310,6 +314,11 @@ op-sink-microwatt = <10000000>; }; }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; }; &i2c1 { @@ -330,6 +339,17 @@ reg = <0x4f>; }; + sled2_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED2_SWD_MUX", "SLED2_XRES_SWD_N", + "SLED2_CLKREQ_N", "SLED2_PCIE_PWR_EN"; + }; + sled2_ioexp: pca9539@76 { compatible = "nxp,pca9539"; reg = <0x76>; @@ -380,6 +400,11 @@ op-sink-microwatt = <10000000>; }; }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; }; &i2c2 { @@ -400,6 +425,17 @@ reg = <0x4f>; }; + sled3_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED3_SWD_MUX", "SLED3_XRES_SWD_N", + "SLED3_CLKREQ_N", "SLED3_PCIE_PWR_EN"; + }; + sled3_ioexp: pca9539@76 { compatible = "nxp,pca9539"; reg = <0x76>; @@ -450,6 +486,11 @@ op-sink-microwatt = <10000000>; }; }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; }; &i2c3 { @@ -470,6 +511,17 @@ reg = <0x4f>; }; + sled4_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED4_SWD_MUX", "SLED4_XRES_SWD_N", + "SLED4_CLKREQ_N", "SLED4_PCIE_PWR_EN"; + }; + sled4_ioexp: pca9539@76 { compatible = "nxp,pca9539"; reg = <0x76>; @@ -520,6 +572,11 @@ op-sink-microwatt = <10000000>; }; }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; }; &i2c4 { @@ -540,6 +597,17 @@ reg = <0x4f>; }; + sled5_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED5_SWD_MUX", "SLED5_XRES_SWD_N", + "SLED5_CLKREQ_N", "SLED5_PCIE_PWR_EN"; + }; + sled5_ioexp: pca9539@76 { compatible = "nxp,pca9539"; reg = <0x76>; @@ -590,6 +658,11 @@ op-sink-microwatt = <10000000>; }; }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; }; &i2c5 { @@ -610,6 +683,17 @@ reg = <0x4f>; }; + sled6_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED6_SWD_MUX", "SLED6_XRES_SWD_N", + "SLED6_CLKREQ_N", "SLED6_PCIE_PWR_EN"; + }; + sled6_ioexp: pca9539@76 { compatible = "nxp,pca9539"; reg = <0x76>; @@ -660,6 +744,11 @@ op-sink-microwatt = <10000000>; }; }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; }; &i2c6 { @@ -732,6 +821,8 @@ compatible = "adi,adm1278"; reg = <0x11>; shunt-resistor-micro-ohms = <300>; + adi,volt-curr-sample-average = <128>; + adi,power-sample-average = <128>; }; tmp421@4c { @@ -771,43 +862,55 @@ &gpio0 { gpio-line-names = /*A0-A7*/ "","","","","","","","", - /*B0-B7*/ "","","SEL_SPI2_MUX","SPI2_MUX1", - "SPI2_MUX2","SPI2_MUX3","","", + /*B0-B7*/ "FUSB302_SLED1_INT_N","FUSB302_SLED2_INT_N", + "SEL_SPI2_MUX","SPI2_MUX1", + "SPI2_MUX2","SPI2_MUX3", + "","FUSB302_SLED3_INT_N", /*C0-C7*/ "","","","","","","","", /*D0-D7*/ "","","","","","","","", /*E0-E7*/ "","","","","","","","", - /*F0-F7*/ "","","","","","","","", - /*G0-G7*/ "BSM_FRU_WP","SWITCH_FRU_MUX","","", + /*F0-F7*/ "BMC_SLED1_STCK","BMC_SLED2_STCK", + "BMC_SLED3_STCK","BMC_SLED4_STCK", + "BMC_SLED5_STCK","BMC_SLED6_STCK", + "","", + /*G0-G7*/ "BSM_FRU_WP","SWITCH_FRU_MUX","","FM_SOL_UART_CH_SEL", "PWRGD_P1V05_VDDCORE","PWRGD_P1V5_VDD","","", /*H0-H7*/ "presence-riser1","presence-riser2", "presence-sled1","presence-sled2", "presence-sled3","presence-sled4", "presence-sled5","presence-sled6", - /*I0-I7*/ "REV_ID0","","REV_ID1","REV_ID2", - "","BSM_FLASH_WP_STATUS","BMC_TPM_PRES","", + /*I0-I7*/ "REV_ID0","", + "REV_ID1","REV_ID2", + "","BSM_FLASH_WP_STATUS", + "BMC_TPM_PRES_N","FUSB302_SLED6_INT_N", /*J0-J7*/ "","","","","","","","", /*K0-K7*/ "","","","","","","","", /*L0-L7*/ "","","","","","BMC_RTC_INT","","", - /*M0-M7*/ "ALERT_SLED1","ALERT_SLED2", - "ALERT_SLED3","ALERT_SLED4", - "ALERT_SLED5","ALERT_SLED6", - "P12V_AUX_ALERT1","", - /*N0-N7*/ "","","","","","","","", + /*M0-M7*/ "ALERT_SLED1_N","ALERT_SLED2_N", + "ALERT_SLED3_N","ALERT_SLED4_N", + "ALERT_SLED5_N","ALERT_SLED6_N", + "","", + /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1", + "LED_POSTCODE_2","LED_POSTCODE_3", + "LED_POSTCODE_4","LED_POSTCODE_5", + "LED_POSTCODE_5","LED_POSTCODE_7", /*O0-O7*/ "","","","", "","BOARD_ID0","BOARD_ID1","BOARD_ID2", /*P0-P7*/ "","","","","","","","BMC_HEARTBEAT", /*Q0-Q7*/ "","","","","","","","", /*R0-R7*/ "","","","","","","","", /*S0-S7*/ "","","","BAT_DETECT", - "BMC_BT_WP0","BMC_BT_WP1","","", + "BMC_BT_WP0_N","BMC_BT_WP1_N","","FUSB302_SLED4_INT_N", /*T0-T7*/ "","","","","","","","", /*U0-U7*/ "","","","","","","","", - /*V0-V7*/ "PWRGD_CNS_PSU","RST_BMC_MVL","","PSU_PRSNT", + /*V0-V7*/ "PWRGD_CNS_PSU","RST_BMC_MVL_N", + "P12V_AUX_ALERT1_N","PSU_PRSNT", "USB2_SEL0_A","USB2_SEL1_A", "USB2_SEL0_B","USB2_SEL1_B", - /*W0-W7*/ "RST_FRONT_IOEXP","","","","","","","", + /*W0-W7*/ "RST_FRONT_IOEXP_N","","","","","","","", /*X0-X7*/ "","","","","","","","", - /*Y0-Y7*/ "BMC_SELF_HW_RST","BSM_PRSNT","BSM_FLASH_LATCH","", + /*Y0-Y7*/ "BMC_SELF_HW_RST","BSM_PRSNT_N", + "BSM_FLASH_LATCH_N","FUSB302_SLED5_INT_N", "","","","", /*Z0-Z7*/ "","","","","","","",""; }; @@ -834,7 +937,16 @@ &pinctrl_adc14_default &pinctrl_adc15_default>; }; +&mdio0 { + status = "okay"; + /* TODO: Add Marvell 88E6191X */ +}; + &mdio3 { status = "okay"; /* TODO: Add Marvell 88X3310 */ }; + +&ehci0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts index 578f9e2fc7ed..382da7934eaa 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts @@ -283,7 +283,7 @@ /*P0-P7*/ "","","","","led-pcieslot-power","","","", /*Q0-Q7*/ "","","regulator-standby-faulted","","","","","", /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","", - /*S0-S7*/ "","","","","","","","", + /*S0-S7*/ "","","","","power-ffs-sync-history","","","", /*T0-T7*/ "","","","","","","","", /*U0-U7*/ "","","","","","","","", /*V0-V7*/ "","BMC_3RESTART_ATTEMPT_P","","","","","","", diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index 528b49e2c0f8..7213434695bf 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -265,7 +265,7 @@ /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","", /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","", /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3", - "","","","", + "power-ffs-sync-history","","","", /*T0-T7*/ "","","","","","","","", /*U0-U7*/ "","","","","","","","", /*V0-V7*/ "","","","","","","","", diff --git a/arch/arm/boot/dts/aspeed-bmc-nuvia-dc-scm.dts b/arch/arm/boot/dts/aspeed-bmc-nuvia-dc-scm.dts new file mode 100644 index 000000000000..f4a97cfb0f23 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-nuvia-dc-scm.dts @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved. + +/dts-v1/; + +#include "aspeed-g6.dtsi" + +/ { + model = "Nuvia DC-SCM BMC"; + compatible = "nuvia,dc-scm-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; +}; + +&mdio3 { + status = "okay"; + + ethphy3: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mac2 { + status = "okay"; + + /* Bootloader sets up the MAC to insert delay */ + phy-mode = "rgmii"; + phy-handle = <ðphy3>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii3_default>; +}; + +&mac3 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + + use-ncsi; +}; + +&rtc { + status = "okay"; +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <133000000>; +#include "openbmc-flash-layout-64.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <133000000>; +#include "openbmc-flash-layout-64-alt.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bios"; + spi-max-frequency = <133000000>; + }; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "BMC_FLASH_MUX_SEL","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "BMC_FWSPI_RST_N","","GPIO_1_BMC_3V3","","","","","", + /*O0-O7*/ "JTAG_MUX_A","JTAG_MUX_B","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","SCMFPGA_SPARE_GPIO1_3V3", + "SCMFPGA_SPARE_GPIO2_3V3","SCMFPGA_SPARE_GPIO3_3V3", + "SCMFPGA_SPARE_GPIO4_3V3","SCMFPGA_SPARE_GPIO5_3V3", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "","","","","","","","", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; +}; + +&gpio1 { + gpio-line-names = + /*A0-A7*/ "GPI_1_BMC_1V8","","","","","", + "SCMFPGA_SPARE_GPIO1_1V8","SCMFPGA_SPARE_GPIO2_1V8", + /*B0-B7*/ "SCMFPGA_SPARE_GPIO3_1V8","SCMFPGA_SPARE_GPIO4_1V8", + "SCMFPGA_SPARE_GPIO5_1V8","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","BMC_SPI1_RST_N","BIOS_FLASH_MUX_SEL","", + "","TPM2_PIRQ_N","TPM2_RST_N","", + /*E0-E7*/ "","","","","","","",""; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&i2c14 { + status = "okay"; +}; + +&i2c15 { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index fa8b581c3d6c..530491ae5eb2 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -54,8 +54,7 @@ ranges; fmc: spi@1e620000 { - reg = < 0x1e620000 0x94 - 0x20000000 0x10000000 >; + reg = <0x1e620000 0x94>, <0x20000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2400-fmc"; @@ -65,34 +64,42 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; + spi-rx-bus-width = <2>; spi-max-frequency = <50000000>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; + spi-rx-bus-width = <2>; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@2 { reg = < 2 >; compatible = "jedec,spi-nor"; + spi-rx-bus-width = <2>; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@3 { reg = < 3 >; compatible = "jedec,spi-nor"; + spi-rx-bus-width = <2>; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@4 { reg = < 4 >; compatible = "jedec,spi-nor"; + spi-rx-bus-width = <2>; + spi-max-frequency = <50000000>; status = "disabled"; }; }; spi: spi@1e630000 { - reg = < 0x1e630000 0x18 - 0x30000000 0x10000000 >; + reg = <0x1e630000 0x18>, <0x30000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2400-spi"; @@ -102,6 +109,7 @@ reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 4147b397c883..c89092c3905b 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -55,8 +55,7 @@ ranges; fmc: spi@1e620000 { - reg = < 0x1e620000 0xc4 - 0x20000000 0x10000000 >; + reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2500-fmc"; @@ -67,25 +66,27 @@ reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@2 { reg = < 2 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; spi1: spi@1e630000 { - reg = < 0x1e630000 0xc4 - 0x30000000 0x08000000 >; + reg = <0x1e630000 0xc4>, <0x30000000 0x08000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2500-spi"; @@ -95,19 +96,20 @@ reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; spi2: spi@1e631000 { - reg = < 0x1e631000 0xc4 - 0x38000000 0x08000000 >; + reg = <0x1e631000 0xc4>, <0x38000000 0x08000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2500-spi"; @@ -117,12 +119,14 @@ reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi index e4775bbceecc..7cd4f075e325 100644 --- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi +++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi @@ -117,9 +117,9 @@ groups = "FWSPID"; }; - pinctrl_fwqspid_default: fwqspid_default { - function = "FWSPID"; - groups = "FWQSPID"; + pinctrl_fwqspi_default: fwqspi_default { + function = "FWQSPI"; + groups = "FWQSPI"; }; pinctrl_fwspiwp_default: fwspiwp_default { @@ -653,12 +653,12 @@ }; pinctrl_qspi1_default: qspi1_default { - function = "QSPI1"; + function = "SPI1"; groups = "QSPI1"; }; pinctrl_qspi2_default: qspi2_default { - function = "QSPI2"; + function = "SPI2"; groups = "QSPI2"; }; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 3d5ce9da42c3..6660564855ff 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -95,8 +95,7 @@ }; fmc: spi@1e620000 { - reg = < 0x1e620000 0xc4 - 0x20000000 0x10000000 >; + reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2600-fmc"; @@ -107,25 +106,27 @@ reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@2 { reg = < 2 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; spi1: spi@1e630000 { - reg = < 0x1e630000 0xc4 - 0x30000000 0x10000000 >; + reg = <0x1e630000 0xc4>, <0x30000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2600-spi"; @@ -135,19 +136,20 @@ reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; spi2: spi@1e631000 { - reg = < 0x1e631000 0xc4 - 0x50000000 0x10000000 >; + reg = <0x1e631000 0xc4>, <0x50000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2600-spi"; @@ -157,18 +159,21 @@ reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@2 { reg = < 2 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; @@ -181,6 +186,7 @@ status = "disabled"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mdio1_default>; + resets = <&syscon ASPEED_RESET_MII>; }; mdio1: mdio@1e650008 { @@ -191,6 +197,7 @@ status = "disabled"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mdio2_default>; + resets = <&syscon ASPEED_RESET_MII>; }; mdio2: mdio@1e650010 { @@ -201,6 +208,7 @@ status = "disabled"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mdio3_default>; + resets = <&syscon ASPEED_RESET_MII>; }; mdio3: mdio@1e650018 { @@ -211,6 +219,7 @@ status = "disabled"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mdio4_default>; + resets = <&syscon ASPEED_RESET_MII>; }; mac0: ftgmac@1e660000 { @@ -298,6 +307,16 @@ status = "disabled"; }; + udc: usb@1e6a2000 { + compatible = "aspeed,ast2600-udc"; + reg = <0x1e6a2000 0x300>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2bd_default>; + status = "disabled"; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -351,6 +370,17 @@ quality = <100>; }; + gfx: display@1e6e6000 { + compatible = "aspeed,ast2600-gfx", "syscon"; + reg = <0x1e6e6000 0x1000>; + reg-io-width = <4>; + clocks = <&syscon ASPEED_CLK_GATE_D1CLK>; + resets = <&syscon ASPEED_RESET_GRAPHICS>; + syscon = <&syscon>; + status = "disabled"; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + }; + xdma: xdma@1e6e7000 { compatible = "aspeed,ast2600-xdma"; reg = <0x1e6e7000 0x100>; @@ -389,6 +419,16 @@ reg = <0x1e6f2000 0x1000>; }; + video: video@1e700000 { + compatible = "aspeed,ast2600-video-engine"; + reg = <0x1e700000 0x1000>; + clocks = <&syscon ASPEED_CLK_GATE_VCLK>, + <&syscon ASPEED_CLK_GATE_ECLK>; + clock-names = "vclk", "eclk"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + gpio0: gpio@1e780000 { #gpio-cells = <2>; gpio-controller; diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi index c1c8650dafce..3542ad8a243e 100644 --- a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi +++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi @@ -44,7 +44,7 @@ status = "okay"; /* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */ - spi-flash@0 { + flash@0 { compatible = "mxicy,mx25u4035", "jedec,spi-nor"; spi-max-frequency = <33000000>; reg = <0>; diff --git a/arch/arm/boot/dts/at91-q5xr5.dts b/arch/arm/boot/dts/at91-q5xr5.dts index 47a00062f01f..9cf60b6f695c 100644 --- a/arch/arm/boot/dts/at91-q5xr5.dts +++ b/arch/arm/boot/dts/at91-q5xr5.dts @@ -125,7 +125,7 @@ cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>, <&pioC 11 GPIO_ACTIVE_LOW>, <0>, <0>; status = "okay"; - m25p80@0 { + flash@0 { compatible = "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts index 1e2a28c2f365..2fb51b9aca2a 100644 --- a/arch/arm/boot/dts/at91-sam9_l9260.dts +++ b/arch/arm/boot/dts/at91-sam9_l9260.dts @@ -101,7 +101,7 @@ nand0: nand@40000000 { nand-bus-width = <8>; nand-ecc-mode = "soft"; - nand-on-flash-bbt = <1>; + nand-on-flash-bbt; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi index 21c86171e462..ba621783acdb 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -214,7 +214,7 @@ pinctrl-0 = <&pinctrl_qspi1_default>; status = "disabled"; - qspi1_flash: spi_flash@0 { + qspi1_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts index c145c4e5ef58..5e8755f22784 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts @@ -191,7 +191,7 @@ &qspi1 { status = "okay"; - qspi1_flash: spi_flash@0 { + qspi1_flash: flash@0 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 9bf2ec0ba3e2..cdfe891f9a9e 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -137,7 +137,7 @@ pinctrl-0 = <&pinctrl_spi0_default>; status = "okay"; - m25p80@0 { + flash@0 { compatible = "atmel,at25df321a"; reg = <0>; spi-max-frequency = <50000000>; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index d72c042f2850..a49c2966b41e 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -57,8 +57,8 @@ }; spi0: spi@f0004000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi0_cs>; + pinctrl-names = "default", "cs"; + pinctrl-1 = <&pinctrl_spi0_cs>; cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>; status = "okay"; }; @@ -171,8 +171,8 @@ }; spi1: spi@f8008000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi1_cs>; + pinctrl-names = "default", "cs"; + pinctrl-1 = <&pinctrl_spi1_cs>; cs-gpios = <&pioC 25 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi index 710cb72bda5a..fd1086f52b40 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi @@ -49,7 +49,7 @@ cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; status = "okay"; - m25p80@0 { + flash@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index d241c24f0d83..e519d2747936 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -81,8 +81,8 @@ }; spi1: spi@fc018000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi0_cs>; + pinctrl-names = "default", "cs"; + pinctrl-1 = <&pinctrl_spi1_cs>; cs-gpios = <&pioB 21 0>; status = "okay"; }; @@ -140,7 +140,7 @@ atmel,pins = <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; }; - pinctrl_spi0_cs: spi0_cs_default { + pinctrl_spi1_cs: spi1_cs_default { atmel,pins = <AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index fe432b6b7e95..7017f626f362 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -65,7 +65,7 @@ spi0: spi@f8010000 { cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; status = "okay"; - m25p80@0 { + flash@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index 08685a10eda1..103544620fd7 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -14,6 +14,7 @@ #include <dt-bindings/mfd/atmel-flexcom.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/sound/microchip,pdmc.h> / { model = "Microchip SAMA7G5-EK"; @@ -456,7 +457,7 @@ &pinctrl_gmac1_mdio_default &pinctrl_gmac1_phy_irq>; phy-mode = "rmii"; - status = "okay"; + status = "okay"; /* Conflict with pdmc0. */ ethernet-phy@0 { reg = <0x0>; @@ -470,6 +471,17 @@ pinctrl-0 = <&pinctrl_i2s0_default>; }; +&pdmc0 { + #sound-dai-cells = <0>; + microchip,mic-pos = <MCHP_PDMC_DS0 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 1 */ + <MCHP_PDMC_DS1 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 2 */ + <MCHP_PDMC_DS0 MCHP_PDMC_CLK_POSITIVE>, /* MIC 3 */ + <MCHP_PDMC_DS1 MCHP_PDMC_CLK_POSITIVE>; /* MIC 4 */ + status = "disabled"; /* Conflict with gmac1. */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pdmc0_default>; +}; + &pioA { pinctrl_can0_default: can0_default { @@ -495,7 +507,7 @@ pinctrl_flx3_default: flx3_default { pinmux = <PIN_PD16__FLEXCOM3_IO0>, <PIN_PD17__FLEXCOM3_IO1>; - bias-disable; + bias-pull-up; }; pinctrl_flx4_default: flx4_default { @@ -639,6 +651,13 @@ bias-disable; }; + pinctrl_pdmc0_default: pdmc0_default { + pinmux = <PIN_PD23__PDMC0_DS0>, + <PIN_PD24__PDMC0_DS1>, + <PIN_PD22__PDMC0_CLK>; + bias_disable; + }; + pinctrl_qspi: qspi { pinmux = <PIN_PB12__QSPI0_IO0>, <PIN_PB11__QSPI0_IO1>, @@ -655,7 +674,7 @@ <PIN_PB21__QSPI0_INT>; bias-disable; slew-rate = <0>; - atmel,drive-strength = <ATMEL_PIO_DRVSTR_HI>; + atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>; }; pinctrl_sdmmc0_default: sdmmc0_default { diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts index a51a3372afa1..ebeaa6ab500e 100644 --- a/arch/arm/boot/dts/at91-vinco.dts +++ b/arch/arm/boot/dts/at91-vinco.dts @@ -59,7 +59,7 @@ spi0: spi@f8010000 { cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; status = "okay"; - m25p80@0 { + flash@0 { compatible = "n25q32b", "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index e1ef4e44e663..4624a6f076f8 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -73,7 +73,7 @@ spi0: spi@fffe0000 { status = "okay"; cs-gpios = <&pioA 3 0>, <0>, <0>, <0>; - mtd_dataflash@0 { + flash@0 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <15000000>; reg = <0>; @@ -94,7 +94,7 @@ status = "okay"; }; - nor_flash@10000000 { + flash@10000000 { compatible = "cfi-flash"; reg = <0x10000000 0x800000>; linux,mtd-name = "physmap-flash.0"; diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts index ce96345d28a3..6381088ba24f 100644 --- a/arch/arm/boot/dts/at91sam9260ek.dts +++ b/arch/arm/boot/dts/at91sam9260ek.dts @@ -92,7 +92,7 @@ spi0: spi@fffc8000 { cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; - mtd_dataflash@1 { + flash@1 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <50000000>; reg = <1>; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index beed819609e8..6fb4fe49cf1c 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -145,7 +145,7 @@ cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>; status = "okay"; - mtd_dataflash@0 { + flash@0 { compatible = "atmel,at45", "atmel,dataflash"; reg = <0>; spi-max-frequency = <15000000>; @@ -178,6 +178,10 @@ status = "okay"; }; + rtc@fffffd20 { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; + }; + watchdog@fffffd40 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 71f60576761a..e732565913a4 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -95,13 +95,17 @@ spi0: spi@fffa4000 { status = "okay"; cs-gpios = <&pioA 5 0>, <0>, <0>, <0>; - mtd_dataflash@0 { + flash@0 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <50000000>; reg = <0>; }; }; + rtc@fffffd20 { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; + }; + watchdog@fffffd40 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 87bb39060e8b..85c17dd1c8d5 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -110,7 +110,7 @@ spi0: spi@fffc8000 { cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; - mtd_dataflash@1 { + flash@1 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <50000000>; reg = <1>; @@ -214,11 +214,23 @@ 24c512@50 { compatible = "atmel,24c512"; reg = <0x50>; + vcc-supply = <®_3v3>; }; wm8731: wm8731@1b { compatible = "wm8731"; reg = <0x1b>; + + /* PCK0 at 12MHz */ + clocks = <&pmc PMC_TYPE_SYSTEM 8>; + clock-names = "mclk"; + assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>; + assigned-clock-rates = <12000000>; + + HPVDD-supply = <&vcc_dac>; + AVDD-supply = <&vcc_dac>; + DCVDD-supply = <®_3v3>; + DBVDD-supply = <®_3v3>; }; }; @@ -254,4 +266,35 @@ atmel,ssc-controller = <&ssc0>; atmel,audio-codec = <&wm8731>; }; + + reg_5v: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_3v3: fixedregulator1 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + vin-supply = <®_5v>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_1v: fixedregulator2 { + compatible = "regulator-fixed"; + regulator-name = "1V"; + vin-supply = <®_5v>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vcc_dac: fixedregulator3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_DAC"; + vin-supply = <®_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index b6256a20fbc7..e5db198a87a8 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -167,7 +167,7 @@ spi0: spi@fffa4000{ status = "okay"; cs-gpios = <&pioB 3 0>, <0>, <0>, <0>; - mtd_dataflash@0 { + flash@0 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <13000000>; reg = <0>; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 2bc4e6e0a923..c905d7bfc771 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -119,7 +119,7 @@ spi0: spi@f0000000 { status = "okay"; cs-gpios = <&pioA 14 0>, <0>, <0>, <0>; - m25p80@0 { + flash@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index 62981b39c815..ddaadfec6751 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -180,7 +180,7 @@ spi0: spi@fffcc000 { status = "okay"; cs-gpios = <&pioA 28 0>, <0>, <0>, <0>; - mtd_dataflash@0 { + flash@0 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <15000000>; reg = <0>; @@ -212,6 +212,10 @@ status = "okay"; }; + rtc@fffffd20 { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; + }; + rtc@fffffe00 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 6d1264de6060..5f4eaa618ab4 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -125,7 +125,7 @@ cs-gpios = <&pioA 14 0>, <0>, <0>, <0>; status = "disabled"; /* conflicts with mmc1 */ - m25p80@0 { + flash@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index ad65be871938..f9f79ed82518 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -397,8 +397,8 @@ #size-cells = <0>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; pinctrl-0 = <&spi_0>; - clocks = <&axi81_clk>; - clock-names = "apb_pclk"; + clocks = <&axi81_clk>, <&axi81_clk>; + clock-names = "sspclk", "apb_pclk"; status = "disabled"; }; @@ -409,8 +409,8 @@ #size-cells = <0>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; pinctrl-0 = <&spi_1>; - clocks = <&axi81_clk>; - clock-names = "apb_pclk"; + clocks = <&axi81_clk>, <&axi81_clk>; + clock-names = "sspclk", "apb_pclk"; status = "disabled"; }; @@ -421,8 +421,8 @@ #size-cells = <0>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; pinctrl-0 = <&spi_2>; - clocks = <&axi81_clk>; - clock-names = "apb_pclk"; + clocks = <&axi81_clk>, <&axi81_clk>; + clock-names = "sspclk", "apb_pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts index 40b9405f1a8e..9b9a18bbb20a 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -32,7 +32,6 @@ * This is based on the unreleased schematic for the Model A+. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -67,21 +66,21 @@ "GPIO27", "SDA0", "SCL0", - "NC", /* GPIO30 */ - "NC", /* GPIO31 */ + "", /* GPIO30 */ + "", /* GPIO31 */ "CAM_GPIO1", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ + "", /* GPIO33 */ + "", /* GPIO34 */ "PWR_LOW_N", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ + "", /* GPIO36 */ + "", /* GPIO37 */ "USB_LIMIT", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO39 */ "PWM0_OUT", /* GPIO40 */ "CAM_GPIO0", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ "PWM1_OUT", /* GPIO45 */ "HDMI_HPD_N", "STATUS_LED", diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts index 11edb581dbaf..f664e4fced93 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts @@ -26,7 +26,6 @@ * RPI00021 sheet 02 * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -42,41 +41,41 @@ "SPI_MISO", "SPI_MOSI", "SPI_SCLK", - "NC", /* GPIO12 */ - "NC", /* GPIO13 */ + "", /* GPIO12 */ + "", /* GPIO13 */ /* Serial port */ "TXD0", "RXD0", "STATUS_LED_N", "GPIO17", "GPIO18", - "NC", /* GPIO19 */ - "NC", /* GPIO20 */ + "", /* GPIO19 */ + "", /* GPIO20 */ "GPIO21", "GPIO22", "GPIO23", "GPIO24", "GPIO25", - "NC", /* GPIO26 */ + "", /* GPIO26 */ "CAM_GPIO0", /* Binary number representing build/revision */ "CONFIG0", "CONFIG1", "CONFIG2", "CONFIG3", - "NC", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO32 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ "PWM0_OUT", - "NC", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ + "", /* GPIO41 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ "PWM1_OUT", "HDMI_HPD_P", "SD_CARD_DET", diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index 1b435c64bd9c..248feb2ed23d 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -34,7 +34,6 @@ * RPI-BPLUS sheet 1 * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -69,21 +68,21 @@ "GPIO27", "SDA0", "SCL0", - "NC", /* GPIO30 */ + "", /* GPIO30 */ "LAN_RUN", /* GPIO31 */ "CAM_GPIO1", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ + "", /* GPIO33 */ + "", /* GPIO34 */ "PWR_LOW_N", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ + "", /* GPIO36 */ + "", /* GPIO37 */ "USB_LIMIT", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO39 */ "PWM0_OUT", /* GPIO40 */ "CAM_GPIO0", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "ETHCLK", /* GPIO44 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "ETH_CLK", /* GPIO44 */ "PWM1_OUT", /* GPIO45 */ "HDMI_HPD_N", "STATUS_LED", diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index a23c25c00eea..f5b66d3f4ff3 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -27,7 +27,6 @@ * RPI00022 sheet 02 * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -43,40 +42,40 @@ "SPI_MISO", "SPI_MOSI", "SPI_SCLK", - "NC", /* GPIO12 */ - "NC", /* GPIO13 */ + "", /* GPIO12 */ + "", /* GPIO13 */ /* Serial port */ "TXD0", "RXD0", "STATUS_LED_N", "GPIO17", "GPIO18", - "NC", /* GPIO19 */ - "NC", /* GPIO20 */ + "", /* GPIO19 */ + "", /* GPIO20 */ "CAM_GPIO", "GPIO22", "GPIO23", "GPIO24", "GPIO25", - "NC", /* GPIO26 */ + "", /* GPIO26 */ "GPIO27", "GPIO28", "GPIO29", "GPIO30", "GPIO31", - "NC", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO32 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ "PWM0_OUT", - "NC", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ + "", /* GPIO41 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ "PWM1_OUT", "HDMI_HPD_P", "SD_CARD_DET", diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 1b63d6b19750..f589bede2b11 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -27,7 +27,6 @@ * RPI00021 sheet 02 * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -43,41 +42,40 @@ "SPI_MISO", "SPI_MOSI", "SPI_SCLK", - "NC", /* GPIO12 */ - "NC", /* GPIO13 */ + "", /* GPIO12 */ + "", /* GPIO13 */ /* Serial port */ "TXD0", "RXD0", "STATUS_LED_N", "GPIO17", "GPIO18", - "NC", /* GPIO19 */ - "NC", /* GPIO20 */ - "GPIO21", + "", /* GPIO19 */ + "", /* GPIO20 */ + "CAM_GPIO0", "GPIO22", "GPIO23", "GPIO24", "GPIO25", - "NC", /* GPIO26 */ - "CAM_GPIO0", - /* Binary number representing build/revision */ - "CONFIG0", - "CONFIG1", - "CONFIG2", - "CONFIG3", - "NC", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO26 */ + "GPIO27", + "GPIO28", + "GPIO29", + "GPIO30", + "GPIO31", + "", /* GPIO32 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ "PWM0_OUT", - "NC", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ + "", /* GPIO41 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ "PWM1_OUT", "HDMI_HPD_P", "SD_CARD_DET", diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts index a75c882e6575..87958a96c3e0 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts @@ -13,7 +13,6 @@ * This is based on the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index 243236bc1e00..596bb1ef994e 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -39,7 +39,6 @@ * This is based on the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -74,19 +73,21 @@ "GPIO27", "SDA0", "SCL0", - "NC", /* GPIO30 */ - "NC", /* GPIO31 */ - "NC", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", "CAM_GPIO1", /* GPIO40 */ "WL_ON", /* GPIO41 */ - "NC", /* GPIO42 */ + "", /* GPIO42 */ "WIFI_CLK", /* GPIO43 */ "CAM_GPIO0", /* GPIO44 */ "BT_ON", /* GPIO45 */ diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts index 6f9b3a908f28..a65c2bca69ea 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts @@ -29,7 +29,6 @@ * This is based on the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -64,22 +63,22 @@ "GPIO27", "SDA0", "SCL0", - "NC", /* GPIO30 */ - "NC", /* GPIO31 */ + "", /* GPIO30 */ + "", /* GPIO31 */ "CAM_GPIO1", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ - "NC", /* GPIO40 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ + "", /* GPIO40 */ "CAM_GPIO0", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ - "NC", /* GPIO45 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ + "", /* GPIO45 */ "HDMI_HPD_N", "STATUS_LED_N", /* Used by SD Card */ diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts index d8af8eeac7b6..3635502b1e0a 100644 --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -34,7 +34,6 @@ * the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -83,7 +82,7 @@ "CAM_GPIO0", "SMPS_SCL", "SMPS_SDA", - "ETHCLK", + "ETH_CLK", "PWM1_OUT", "HDMI_HPD_N", "STATUS_LED", diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts index d73daf5bff1d..f7222a28903e 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts @@ -55,7 +55,6 @@ * This is mostly based on the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts index e12938baaf12..ec721d323ac5 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts @@ -45,7 +45,7 @@ #gpio-cells = <2>; gpio-line-names = "BT_ON", "WL_ON", - "STATUS_LED_R", + "PWR_LED_R", "LAN_RUN", "", "CAM_GPIO0", @@ -61,7 +61,6 @@ * the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -110,7 +109,7 @@ "SD1_DATA3", "PWM0_OUT", "PWM1_OUT", - "ETHCLK", + "ETH_CLK", "WIFI_CLK", "SDA0", "SCL0", diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index 42b5383b55d8..fb6a417d73e7 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -54,7 +54,6 @@ * the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -103,7 +102,7 @@ "SD1_DATA3", "PWM0_OUT", "PWM1_OUT", - "ETHCLK", + "ETH_CLK", "WIFI_CLK", "SDA0", "SCL0", diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts index 588d9411ceb6..cf84e69fced8 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts @@ -13,7 +13,6 @@ * This is based on the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -63,8 +62,8 @@ "GPIO43", "GPIO44", "GPIO45", - "GPIO46", - "GPIO47", + "SMPS_SCL", + "SMPS_SDA", /* Used by eMMC */ "SD_CLK_R", "SD_CMD_R", diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi index 828a20561b96..f57b4ca145dd 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi +++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi @@ -41,12 +41,12 @@ #gpio-cells = <2>; gpio-line-names = "HDMI_HPD_N", "EMMC_EN_N", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC"; + "", + "", + "", + "", + "", + ""; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi index 967e081cb9c2..882b13807075 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi @@ -12,7 +12,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { + ethernet: ethernet@1 { compatible = "usb424,ec00"; reg = <1>; }; diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi index dc7ae776db5f..4273b90b53cc 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi @@ -11,7 +11,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { + ethernet: ethernet@1 { compatible = "usb424,ec00"; reg = <1>; }; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi new file mode 100644 index 000000000000..d659e409a17e --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Buffalo WZR-1166DHP and WZR-1166DHP2 + * + * Copyright (C) 2014 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com> + */ + + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + spi { + compatible = "spi-gpio"; + num-chipselects = <1>; + gpio-sck = <&chipcommon 7 0>; + gpio-mosi = <&chipcommon 4 0>; + cs-gpios = <&chipcommon 6 0>; + #address-cells = <1>; + #size-cells = <0>; + + hc595: gpio_spi@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + registers-number = <1>; + spi-max-frequency = <100000>; + + gpio-controller; + #gpio-cells = <2>; + + }; + }; + + leds { + compatible = "gpio-leds"; + + usb { + /* label = "bcm53xx:blue:usb"; */ + function = LED_FUNCTION_USB; + color = <LED_COLOR_ID_BLUE>; + gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>, <&ohci_port2>, + <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + power0 { + /* label = "bcm53xx:red:power"; */ + function = LED_FUNCTION_FAULT; + color = <LED_COLOR_ID_RED>; + gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; + }; + + power1 { + /* label = "bcm53xx:white:power"; */ + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_WHITE>; + gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + router0 { + /* label = "bcm53xx:blue:router"; */ + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + router1 { + /* label = "bcm53xx:amber:router"; */ + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_AMBER>; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + }; + + wan { + /* label = "bcm53xx:blue:wan"; */ + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_BLUE>; + gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + wireless0 { + /* label = "bcm53xx:blue:wireless"; */ + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_BLUE>; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; + }; + + wireless1 { + /* label = "bcm53xx:amber:wireless"; */ + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_AMBER>; + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + aoss { + label = "AOSS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + }; + + /* Commit mode set by switch? */ + mode { + label = "Mode"; + linux,code = <KEY_SETUP>; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + + /* Switch: AP mode */ + sw_ap { + label = "AP"; + linux,code = <BTN_0>; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + + eject { + label = "USB eject"; + linux,code = <KEY_EJECTCD>; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>; +}; + +&spi_nor { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts new file mode 100644 index 000000000000..8e506269fa1a --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindigs for Buffalo WZR-1166DHP + * + * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi" + +/ { + compatible = "buffalo,wzr-1166dhp", "brcm,bcm4708"; + model = "Buffalo WZR-1166DHP"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + +}; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts new file mode 100644 index 000000000000..596129027074 --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindigs for Buffalo WZR-1166DHP2 + * + * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi" + +/ { + compatible = "buffalo,wzr-1166dhp2", "brcm,bcm4708"; + model = "Buffalo WZR-1166DHP2"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + +}; diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts index 82f9629f0abb..d8503758342b 100644 --- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright (C) 2021 Arınç ÃœNAL <arinc.unal@arinc9.com> + * Copyright (C) 2021-2022 Arınç ÃœNAL <arinc.unal@arinc9.com> */ /dts-v1/; @@ -25,6 +25,9 @@ nvram@1c080000 { compatible = "brcm,nvram"; reg = <0x1c080000 0x00180000>; + + et1macaddr: et1macaddr { + }; }; leds { @@ -177,9 +180,6 @@ dsa,member = <0 0>; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "lan4"; @@ -208,6 +208,7 @@ sw0_p5: port@5 { reg = <5>; label = "extsw"; + phy-mode = "rgmii"; fixed-link { speed = <1000>; @@ -231,7 +232,6 @@ reg = <8>; ethernet = <&gmac2>; label = "cpu"; - status = "disabled"; fixed-link { speed = <1000>; @@ -241,6 +241,15 @@ }; }; +&gmac0 { + status = "disabled"; +}; + +&gmac1 { + nvmem-cells = <&et1macaddr>; + nvmem-cell-names = "mac-address"; +}; + &usb2 { vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi new file mode 100644 index 000000000000..c016e12b7372 --- /dev/null +++ b/arch/arm/boot/dts/bcm47622.dtsi @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm47622", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + CA7_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + CA7_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>, + <&CA7_2>, <&CA7_3>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + cpu_off = <1>; + cpu_on = <2>; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x818000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts index 66c64a6ec414..daca63f25134 100644 --- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts @@ -13,7 +13,7 @@ #include <dt-bindings/leds/common.h> / { - compatible = "meraki,mr32", "brcm,brcm53016", "brcm,bcm4708"; + compatible = "meraki,mr32", "brcm,bcm53016", "brcm,bcm4708"; model = "Meraki MR32"; chosen { diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 603c700c706f..65f8a759f1e3 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -455,7 +455,7 @@ reg = <0x180 0x4>; }; - pinctrl: pin-controller@1c0 { + pinctrl: pinctrl@1c0 { compatible = "brcm,bcm4708-pinmux"; reg = <0x1c0 0x24>; reg-names = "cru_gpio_control"; diff --git a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts index 2e7fda9b998c..975f854f652f 100644 --- a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts +++ b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts @@ -34,7 +34,7 @@ status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { compatible = "m25p80"; reg = <0>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm947622.dts b/arch/arm/boot/dts/bcm947622.dts new file mode 100644 index 000000000000..6f083724ab8e --- /dev/null +++ b/arch/arm/boot/dts/bcm947622.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm47622.dtsi" + +/ { + model = "Broadcom BCM947622 Reference Board"; + compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts index 52feca0fb906..dd63a148a16b 100644 --- a/arch/arm/boot/dts/bcm953012er.dts +++ b/arch/arm/boot/dts/bcm953012er.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Enterprise Router (BCM953012ER)"; - compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708"; + compatible = "brcm,bcm953012er", "brcm,bcm53012", "brcm,bcm4708"; memory@0 { device_type = "memory"; diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/bcm953012hr.dts index 9140be7ec053..b070b69466bd 100644 --- a/arch/arm/boot/dts/bcm953012hr.dts +++ b/arch/arm/boot/dts/bcm953012hr.dts @@ -37,7 +37,7 @@ / { model = "NorthStar HR (BCM953012HR)"; - compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708"; + compatible = "brcm,bcm953012hr", "brcm,bcm53012", "brcm,bcm4708"; aliases { ethernet0 = &gmac0; diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts index de40bd59a5fa..f1e6bcaa1edd 100644 --- a/arch/arm/boot/dts/bcm953012k.dts +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -36,7 +36,7 @@ / { model = "NorthStar SVK (BCM953012K)"; - compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708"; + compatible = "brcm,bcm953012k", "brcm,bcm53012", "brcm,bcm4708"; aliases { serial0 = &uart0; diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index 60376b62cd5f..15f023656df0 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -136,7 +136,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index 8eeb319f5b54..9b9c225a1fb3 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -136,7 +136,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index dc86d5a91292..ca9311452739 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -152,7 +152,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index c457e53d886e..9db3c851451a 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -140,7 +140,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index c06871915a1c..32786e7c4e12 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -144,7 +144,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index b22fc6624ae4..74263d98de73 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -151,7 +151,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 0183f8965a74..69ebc7a913a7 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -155,7 +155,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index 007e34715956..e96bc3f2d5cf 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -140,7 +140,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 87c517d65f62..e9aecac4f5b5 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -278,7 +278,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi1_pins &spi1_cs0_pin>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index c3942b4e82ad..0386376fa486 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -679,7 +679,9 @@ "scheduler", "queuemgr"; interrupts = <58>; #dma-cells = <2>; + /* For backwards compatibility: */ #dma-channels = <4>; + dma-channels = <4>; power-domains = <&psc1 1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 7702e048e110..a92630113f57 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -167,8 +167,11 @@ interrupts = <17>; interrupt-names = "glue"; #dma-cells = <2>; + /* For backwards compatibility: */ #dma-channels = <30>; + dma-channels = <30>; #dma-requests = <256>; + dma-requests = <256>; }; }; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index 5126e2d72ed7..778796c10af8 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -177,7 +177,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mcspi1_pins>; - m25p80@0 { + flash@0 { compatible = "w25x32"; spi-max-frequency = <48000000>; reg = <0>; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index a9e7274806f4..eb0a95da94b2 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -655,8 +655,11 @@ interrupts = <17>; interrupt-names = "glue"; #dma-cells = <2>; + /* For backwards compatibility: */ #dma-channels = <30>; + dma-channels = <30>; #dma-requests = <256>; + dma-requests = <256>; }; }; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 3e1584e787ae..2639b9fe0ab4 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -127,7 +127,7 @@ status = "okay"; /* spi0.0: 4M Flash Winbond W25Q32BV */ - spi-flash@0 { + flash@0 { compatible = "st,w25q32"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/dove-d2plug.dts index 273f12ca2512..a0e8996c2ffd 100644 --- a/arch/arm/boot/dts/dove-d2plug.dts +++ b/arch/arm/boot/dts/dove-d2plug.dts @@ -62,7 +62,7 @@ status = "okay"; /* spi0.0: 4M Flash Macronix MX25L3205D */ - spi-flash@0 { + flash@0 { compatible = "st,m25l3205d"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts index 826026c28f90..1e81d1b97055 100644 --- a/arch/arm/boot/dts/dove-d3plug.dts +++ b/arch/arm/boot/dts/dove-d3plug.dts @@ -79,7 +79,7 @@ status = "okay"; /* spi0.0: 2M Flash Macronix MX25L1605D */ - spi-flash@0 { + flash@0 { compatible = "st,m25l1605d"; spi-max-frequency = <86000000>; reg = <0>; diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts index 1754a62e014e..c1912dc6bfc3 100644 --- a/arch/arm/boot/dts/dove-dove-db.dts +++ b/arch/arm/boot/dts/dove-dove-db.dts @@ -27,7 +27,7 @@ status = "okay"; /* spi0.0: 4M Flash ST-M25P32-VMF6P */ - spi-flash@0 { + flash@0 { compatible = "st,m25p32"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi index 0f71a9f37a72..68c43eb12c1a 100644 --- a/arch/arm/boot/dts/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -135,7 +135,7 @@ status = "okay"; spi-max-frequency = <76800000>; - m25p80@0 { + flash@0 { compatible = "s25fl256s1"; spi-max-frequency = <76800000>; reg = <0>; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 0a11bacffc1f..5733e3a4ea8e 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -4188,11 +4188,11 @@ reg = <0x1d0010 0x4>; reg-names = "sysc"; ti,sysc-midle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; + <SYSC_IDLE_NO>; ti,sysc-sidle = <SYSC_IDLE_FORCE>, <SYSC_IDLE_NO>, <SYSC_IDLE_SMART>; + power-domains = <&prm_vpe>; clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index f12825268188..8948e10dbeb8 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -474,7 +474,7 @@ status = "okay"; spi-max-frequency = <76800000>; - m25p80@0 { + flash@0 { compatible = "s25fl256s1"; spi-max-frequency = <76800000>; reg = <0>; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index e2b7fcb061cf..57868ac60d29 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -511,7 +511,7 @@ &qspi { spi-max-frequency = <96000000>; - m25p80@0 { + flash@0 { spi-max-frequency = <96000000>; }; }; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 2365554eef3c..04a7a6d1d529 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -5,210 +5,244 @@ * Copyright (C) 2013 Texas Instruments, Inc. */ &cm_core_aon_clocks { - atl_clkin0_ck: atl_clkin0_ck { + atl_clkin0_ck: clock-atl-clkin0 { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; + clock-output-names = "atl_clkin0_ck"; clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; - atl_clkin1_ck: atl_clkin1_ck { + atl_clkin1_ck: clock-atl-clkin1 { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; + clock-output-names = "atl_clkin1_ck"; clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; - atl_clkin2_ck: atl_clkin2_ck { + atl_clkin2_ck: clock-atl-clkin2 { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; + clock-output-names = "atl_clkin2_ck"; clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; - atl_clkin3_ck: atl_clkin3_ck { + atl_clkin3_ck: clock-atl-clkin3 { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; + clock-output-names = "atl_clkin3_ck"; clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; - hdmi_clkin_ck: hdmi_clkin_ck { + hdmi_clkin_ck: clock-hdmi-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "hdmi_clkin_ck"; clock-frequency = <0>; }; - mlb_clkin_ck: mlb_clkin_ck { + mlb_clkin_ck: clock-mlb-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "mlb_clkin_ck"; clock-frequency = <0>; }; - mlbp_clkin_ck: mlbp_clkin_ck { + mlbp_clkin_ck: clock-mlbp-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "mlbp_clkin_ck"; clock-frequency = <0>; }; - pciesref_acs_clk_ck: pciesref_acs_clk_ck { + pciesref_acs_clk_ck: clock-pciesref-acs { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "pciesref_acs_clk_ck"; clock-frequency = <100000000>; }; - ref_clkin0_ck: ref_clkin0_ck { + ref_clkin0_ck: clock-ref-clkin0 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "ref_clkin0_ck"; clock-frequency = <0>; }; - ref_clkin1_ck: ref_clkin1_ck { + ref_clkin1_ck: clock-ref-clkin1 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "ref_clkin1_ck"; clock-frequency = <0>; }; - ref_clkin2_ck: ref_clkin2_ck { + ref_clkin2_ck: clock-ref-clkin2 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "ref_clkin2_ck"; clock-frequency = <0>; }; - ref_clkin3_ck: ref_clkin3_ck { + ref_clkin3_ck: clock-ref-clkin3 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "ref_clkin3_ck"; clock-frequency = <0>; }; - rmii_clk_ck: rmii_clk_ck { + rmii_clk_ck: clock-rmii { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "rmii_clk_ck"; clock-frequency = <0>; }; - sdvenc_clkin_ck: sdvenc_clkin_ck { + sdvenc_clkin_ck: clock-sdvenc-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "sdvenc_clkin_ck"; clock-frequency = <0>; }; - secure_32k_clk_src_ck: secure_32k_clk_src_ck { + secure_32k_clk_src_ck: clock-secure-32k-clk-src { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "secure_32k_clk_src_ck"; clock-frequency = <32768>; }; - sys_clk32_crystal_ck: sys_clk32_crystal_ck { + sys_clk32_crystal_ck: clock-sys-clk32-crystal { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "sys_clk32_crystal_ck"; clock-frequency = <32768>; }; - sys_clk32_pseudo_ck: sys_clk32_pseudo_ck { + sys_clk32_pseudo_ck: clock-sys-clk32-pseudo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "sys_clk32_pseudo_ck"; clocks = <&sys_clkin1>; clock-mult = <1>; clock-div = <610>; }; - virt_12000000_ck: virt_12000000_ck { + virt_12000000_ck: clock-virt-12000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_12000000_ck"; clock-frequency = <12000000>; }; - virt_13000000_ck: virt_13000000_ck { + virt_13000000_ck: clock-virt-13000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_13000000_ck"; clock-frequency = <13000000>; }; - virt_16800000_ck: virt_16800000_ck { + virt_16800000_ck: clock-virt-16800000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_16800000_ck"; clock-frequency = <16800000>; }; - virt_19200000_ck: virt_19200000_ck { + virt_19200000_ck: clock-virt-19200000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_19200000_ck"; clock-frequency = <19200000>; }; - virt_20000000_ck: virt_20000000_ck { + virt_20000000_ck: clock-virt-20000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_20000000_ck"; clock-frequency = <20000000>; }; - virt_26000000_ck: virt_26000000_ck { + virt_26000000_ck: clock-virt-26000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_26000000_ck"; clock-frequency = <26000000>; }; - virt_27000000_ck: virt_27000000_ck { + virt_27000000_ck: clock-virt-27000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_27000000_ck"; clock-frequency = <27000000>; }; - virt_38400000_ck: virt_38400000_ck { + virt_38400000_ck: clock-virt-38400000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_38400000_ck"; clock-frequency = <38400000>; }; - sys_clkin2: sys_clkin2 { + sys_clkin2: clock-sys-clkin2 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "sys_clkin2"; clock-frequency = <22579200>; }; - usb_otg_clkin_ck: usb_otg_clkin_ck { + usb_otg_clkin_ck: clock-usb-otg-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "usb_otg_clkin_ck"; clock-frequency = <0>; }; - video1_clkin_ck: video1_clkin_ck { + video1_clkin_ck: clock-video1-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "video1_clkin_ck"; clock-frequency = <0>; }; - video1_m2_clkin_ck: video1_m2_clkin_ck { + video1_m2_clkin_ck: clock-video1-m2-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "video1_m2_clkin_ck"; clock-frequency = <0>; }; - video2_clkin_ck: video2_clkin_ck { + video2_clkin_ck: clock-video2-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "video2_clkin_ck"; clock-frequency = <0>; }; - video2_m2_clkin_ck: video2_m2_clkin_ck { + video2_m2_clkin_ck: clock-video2-m2-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "video2_m2_clkin_ck"; clock-frequency = <0>; }; - dpll_abe_ck: dpll_abe_ck@1e0 { + dpll_abe_ck: clock@1e0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-m4xen-clock"; + clock-output-names = "dpll_abe_ck"; clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>; reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>; }; - dpll_abe_x2_ck: dpll_abe_x2_ck { + dpll_abe_x2_ck: clock-dpll-abe-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_abe_x2_ck"; clocks = <&dpll_abe_ck>; }; - dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 { + dpll_abe_m2x2_ck: clock-dpll-abe-m2x2-8@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m2x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -217,18 +251,20 @@ ti,invert-autoidle-bit; }; - abe_clk: abe_clk@108 { + abe_clk: clock-abe@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_clk"; clocks = <&dpll_abe_m2x2_ck>; ti,max-div = <4>; reg = <0x0108>; ti,index-power-of-two; }; - dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 { + dpll_abe_m2_ck: clock-dpll-abe-m2-8@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m2_ck"; clocks = <&dpll_abe_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -237,9 +273,10 @@ ti,invert-autoidle-bit; }; - dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 { + dpll_abe_m3x2_ck: clock-dpll-abe-m3x2-8@1f4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m3x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -248,30 +285,34 @@ ti,invert-autoidle-bit; }; - dpll_core_byp_mux: dpll_core_byp_mux@12c { + dpll_core_byp_mux: clock-dpll-core-byp-mux-23@12c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_core_byp_mux"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x012c>; }; - dpll_core_ck: dpll_core_ck@120 { + dpll_core_ck: clock@120 { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; + clock-output-names = "dpll_core_ck"; clocks = <&sys_clkin1>, <&dpll_core_byp_mux>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; - dpll_core_x2_ck: dpll_core_x2_ck { + dpll_core_x2_ck: clock-dpll-core-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_core_x2_ck"; clocks = <&dpll_core_ck>; }; - dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c { + dpll_core_h12x2_ck: clock-dpll-core-h12x2-8@13c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h12x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -280,24 +321,27 @@ ti,invert-autoidle-bit; }; - mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div { + mpu_dpll_hs_clk_div: clock-mpu-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mpu_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_mpu_ck: dpll_mpu_ck@160 { + dpll_mpu_ck: clock@160 { #clock-cells = <0>; compatible = "ti,omap5-mpu-dpll-clock"; + clock-output-names = "dpll_mpu_ck"; clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>; reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; }; - dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 { + dpll_mpu_m2_ck: clock-dpll-mpu-m2-8@170 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_mpu_m2_ck"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -306,42 +350,47 @@ ti,invert-autoidle-bit; }; - mpu_dclk_div: mpu_dclk_div { + mpu_dclk_div: clock-mpu-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mpu_dclk_div"; clocks = <&dpll_mpu_m2_ck>; clock-mult = <1>; clock-div = <1>; }; - dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div { + dsp_dpll_hs_clk_div: clock-dsp-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dsp_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_dsp_byp_mux: dpll_dsp_byp_mux@240 { + dpll_dsp_byp_mux: clock-dpll-dsp-byp-mux-23@240 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_dsp_byp_mux"; clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x0240>; }; - dpll_dsp_ck: dpll_dsp_ck@234 { + dpll_dsp_ck: clock@234 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_dsp_ck"; clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>; reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>; assigned-clocks = <&dpll_dsp_ck>; assigned-clock-rates = <600000000>; }; - dpll_dsp_m2_ck: dpll_dsp_m2_ck@244 { + dpll_dsp_m2_ck: clock-dpll-dsp-m2-8@244 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_dsp_m2_ck"; clocks = <&dpll_dsp_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -352,34 +401,38 @@ assigned-clock-rates = <600000000>; }; - iva_dpll_hs_clk_div: iva_dpll_hs_clk_div { + iva_dpll_hs_clk_div: clock-iva-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "iva_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_iva_byp_mux: dpll_iva_byp_mux@1ac { + dpll_iva_byp_mux: clock-dpll-iva-byp-mux-23@1ac { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_iva_byp_mux"; clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x01ac>; }; - dpll_iva_ck: dpll_iva_ck@1a0 { + dpll_iva_ck: clock@1a0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_iva_ck"; clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; assigned-clocks = <&dpll_iva_ck>; assigned-clock-rates = <1165000000>; }; - dpll_iva_m2_ck: dpll_iva_m2_ck@1b0 { + dpll_iva_m2_ck: clock-dpll-iva-m2-8@1b0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_iva_m2_ck"; clocks = <&dpll_iva_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -390,34 +443,38 @@ assigned-clock-rates = <388333334>; }; - iva_dclk: iva_dclk { + iva_dclk: clock-iva-dclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "iva_dclk"; clocks = <&dpll_iva_m2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_gpu_byp_mux: dpll_gpu_byp_mux@2e4 { + dpll_gpu_byp_mux: clock-dpll-gpu-byp-mux-23@2e4 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_gpu_byp_mux"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x02e4>; }; - dpll_gpu_ck: dpll_gpu_ck@2d8 { + dpll_gpu_ck: clock@2d8 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_gpu_ck"; clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>; reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>; assigned-clocks = <&dpll_gpu_ck>; assigned-clock-rates = <1277000000>; }; - dpll_gpu_m2_ck: dpll_gpu_m2_ck@2e8 { + dpll_gpu_m2_ck: clock-dpll-gpu-m2-8@2e8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gpu_m2_ck"; clocks = <&dpll_gpu_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -428,9 +485,10 @@ assigned-clock-rates = <425666667>; }; - dpll_core_m2_ck: dpll_core_m2_ck@130 { + dpll_core_m2_ck: clock-dpll-core-m2-8@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m2_ck"; clocks = <&dpll_core_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -439,32 +497,36 @@ ti,invert-autoidle-bit; }; - core_dpll_out_dclk_div: core_dpll_out_dclk_div { + core_dpll_out_dclk_div: clock-core-dpll-out-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "core_dpll_out_dclk_div"; clocks = <&dpll_core_m2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_ddr_byp_mux: dpll_ddr_byp_mux@21c { + dpll_ddr_byp_mux: clock-dpll-ddr-byp-mux-23@21c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_ddr_byp_mux"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x021c>; }; - dpll_ddr_ck: dpll_ddr_ck@210 { + dpll_ddr_ck: clock@210 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_ddr_ck"; clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>; reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>; }; - dpll_ddr_m2_ck: dpll_ddr_m2_ck@220 { + dpll_ddr_m2_ck: clock-dpll-ddr-m2-8@220 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_ddr_m2_ck"; clocks = <&dpll_ddr_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -473,24 +535,27 @@ ti,invert-autoidle-bit; }; - dpll_gmac_byp_mux: dpll_gmac_byp_mux@2b4 { + dpll_gmac_byp_mux: clock-dpll-gmac-byp-mux-23@2b4 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_gmac_byp_mux"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x02b4>; }; - dpll_gmac_ck: dpll_gmac_ck@2a8 { + dpll_gmac_ck: clock@2a8 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_gmac_ck"; clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>; reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>; }; - dpll_gmac_m2_ck: dpll_gmac_m2_ck@2b8 { + dpll_gmac_m2_ck: clock-dpll-gmac-m2-8@2b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gmac_m2_ck"; clocks = <&dpll_gmac_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -499,72 +564,81 @@ ti,invert-autoidle-bit; }; - video2_dclk_div: video2_dclk_div { + video2_dclk_div: clock-video2-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video2_dclk_div"; clocks = <&video2_m2_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - video1_dclk_div: video1_dclk_div { + video1_dclk_div: clock-video1-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video1_dclk_div"; clocks = <&video1_m2_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - hdmi_dclk_div: hdmi_dclk_div { + hdmi_dclk_div: clock-hdmi-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "hdmi_dclk_div"; clocks = <&hdmi_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - per_dpll_hs_clk_div: per_dpll_hs_clk_div { + per_dpll_hs_clk_div: clock-per-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "per_dpll_hs_clk_div"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <2>; }; - usb_dpll_hs_clk_div: usb_dpll_hs_clk_div { + usb_dpll_hs_clk_div: clock-usb-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "usb_dpll_hs_clk_div"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <3>; }; - eve_dpll_hs_clk_div: eve_dpll_hs_clk_div { + eve_dpll_hs_clk_div: clock-eve-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "eve_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_eve_byp_mux: dpll_eve_byp_mux@290 { + dpll_eve_byp_mux: clock-dpll-eve-byp-mux-23@290 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_eve_byp_mux"; clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x0290>; }; - dpll_eve_ck: dpll_eve_ck@284 { + dpll_eve_ck: clock@284 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_eve_ck"; clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>; reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>; }; - dpll_eve_m2_ck: dpll_eve_m2_ck@294 { + dpll_eve_m2_ck: clock-dpll-eve-m2-8@294 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_eve_m2_ck"; clocks = <&dpll_eve_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -573,17 +647,19 @@ ti,invert-autoidle-bit; }; - eve_dclk_div: eve_dclk_div { + eve_dclk_div: clock-eve-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "eve_dclk_div"; clocks = <&dpll_eve_m2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 { + dpll_core_h13x2_ck: clock-dpll-core-h13x2-8@140 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h13x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -592,9 +668,10 @@ ti,invert-autoidle-bit; }; - dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 { + dpll_core_h14x2_ck: clock-dpll-core-h14x2-8@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h14x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -603,9 +680,10 @@ ti,invert-autoidle-bit; }; - dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 { + dpll_core_h22x2_ck: clock-dpll-core-h22x2-8@154 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h22x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -614,9 +692,10 @@ ti,invert-autoidle-bit; }; - dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 { + dpll_core_h23x2_ck: clock-dpll-core-h23x2-8@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h23x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -625,9 +704,10 @@ ti,invert-autoidle-bit; }; - dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c { + dpll_core_h24x2_ck: clock-dpll-core-h24x2-8@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h24x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -636,15 +716,17 @@ ti,invert-autoidle-bit; }; - dpll_ddr_x2_ck: dpll_ddr_x2_ck { + dpll_ddr_x2_ck: clock-dpll-ddr-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_ddr_x2_ck"; clocks = <&dpll_ddr_ck>; }; - dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck@228 { + dpll_ddr_h11x2_ck: clock-dpll-ddr-h11x2-8@228 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_ddr_h11x2_ck"; clocks = <&dpll_ddr_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -653,15 +735,17 @@ ti,invert-autoidle-bit; }; - dpll_dsp_x2_ck: dpll_dsp_x2_ck { + dpll_dsp_x2_ck: clock-dpll-dsp-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_dsp_x2_ck"; clocks = <&dpll_dsp_ck>; }; - dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck@248 { + dpll_dsp_m3x2_ck: clock-dpll-dsp-m3x2-8@248 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_dsp_m3x2_ck"; clocks = <&dpll_dsp_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -672,15 +756,17 @@ assigned-clock-rates = <400000000>; }; - dpll_gmac_x2_ck: dpll_gmac_x2_ck { + dpll_gmac_x2_ck: clock-dpll-gmac-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_gmac_x2_ck"; clocks = <&dpll_gmac_ck>; }; - dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck@2c0 { + dpll_gmac_h11x2_ck: clock-dpll-gmac-h11x2-8@2c0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gmac_h11x2_ck"; clocks = <&dpll_gmac_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -689,9 +775,10 @@ ti,invert-autoidle-bit; }; - dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck@2c4 { + dpll_gmac_h12x2_ck: clock-dpll-gmac-h12x2-8@2c4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gmac_h12x2_ck"; clocks = <&dpll_gmac_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -700,9 +787,10 @@ ti,invert-autoidle-bit; }; - dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck@2c8 { + dpll_gmac_h13x2_ck: clock-dpll-gmac-h13x2-8@2c8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gmac_h13x2_ck"; clocks = <&dpll_gmac_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -711,9 +799,10 @@ ti,invert-autoidle-bit; }; - dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck@2bc { + dpll_gmac_m3x2_ck: clock-dpll-gmac-m3x2-8@2bc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gmac_m3x2_ck"; clocks = <&dpll_gmac_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -722,33 +811,37 @@ ti,invert-autoidle-bit; }; - gmii_m_clk_div: gmii_m_clk_div { + gmii_m_clk_div: clock-gmii-m-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "gmii_m_clk_div"; clocks = <&dpll_gmac_h11x2_ck>; clock-mult = <1>; clock-div = <2>; }; - hdmi_clk2_div: hdmi_clk2_div { + hdmi_clk2_div: clock-hdmi-clk2-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "hdmi_clk2_div"; clocks = <&hdmi_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - hdmi_div_clk: hdmi_div_clk { + hdmi_div_clk: clock-hdmi-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "hdmi_div_clk"; clocks = <&hdmi_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - l3_iclk_div: l3_iclk_div@100 { + l3_iclk_div: clock-l3-iclk-div-4@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3_iclk_div"; ti,max-div = <2>; ti,bit-shift = <4>; reg = <0x0100>; @@ -756,374 +849,420 @@ ti,index-power-of-two; }; - l4_root_clk_div: l4_root_clk_div { + l4_root_clk_div: clock-l4-root-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4_root_clk_div"; clocks = <&l3_iclk_div>; clock-mult = <1>; clock-div = <2>; }; - video1_clk2_div: video1_clk2_div { + video1_clk2_div: clock-video1-clk2-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video1_clk2_div"; clocks = <&video1_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - video1_div_clk: video1_div_clk { + video1_div_clk: clock-video1-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video1_div_clk"; clocks = <&video1_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - video2_clk2_div: video2_clk2_div { + video2_clk2_div: clock-video2-clk2-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video2_clk2_div"; clocks = <&video2_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - video2_div_clk: video2_div_clk { + video2_div_clk: clock-video2-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video2_div_clk"; clocks = <&video2_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - dummy_ck: dummy_ck { + dummy_ck: clock-dummy { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "dummy_ck"; clock-frequency = <0>; }; }; &prm_clocks { - sys_clkin1: sys_clkin1@110 { + sys_clkin1: clock-sys-clkin1@110 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_clkin1"; clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; reg = <0x0110>; ti,index-starts-at-one; }; - abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux@118 { + abe_dpll_sys_clk_mux: clock-abe-dpll-sys-clk-mux@118 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_sys_clk_mux"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x0118>; }; - abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@114 { + abe_dpll_bypass_clk_mux: clock-abe-dpll-bypass-clk-mux@114 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_bypass_clk_mux"; clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>; reg = <0x0114>; }; - abe_dpll_clk_mux: abe_dpll_clk_mux@10c { + abe_dpll_clk_mux: clock-abe-dpll-clk-mux@10c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_clk_mux"; clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>; reg = <0x010c>; }; - abe_24m_fclk: abe_24m_fclk@11c { + abe_24m_fclk: clock-abe-24m@11c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_24m_fclk"; clocks = <&dpll_abe_m2x2_ck>; reg = <0x011c>; ti,dividers = <8>, <16>; }; - aess_fclk: aess_fclk@178 { + aess_fclk: clock-aess@178 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "aess_fclk"; clocks = <&abe_clk>; reg = <0x0178>; ti,max-div = <2>; }; - abe_giclk_div: abe_giclk_div@174 { + abe_giclk_div: clock-abe-giclk-div@174 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_giclk_div"; clocks = <&aess_fclk>; reg = <0x0174>; ti,max-div = <2>; }; - abe_lp_clk_div: abe_lp_clk_div@1d8 { + abe_lp_clk_div: clock-abe-lp-clk-div@1d8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_lp_clk_div"; clocks = <&dpll_abe_m2x2_ck>; reg = <0x01d8>; ti,dividers = <16>, <32>; }; - abe_sys_clk_div: abe_sys_clk_div@120 { + abe_sys_clk_div: clock-abe-sys-clk-div@120 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_sys_clk_div"; clocks = <&sys_clkin1>; reg = <0x0120>; ti,max-div = <2>; }; - adc_gfclk_mux: adc_gfclk_mux@1dc { + adc_gfclk_mux: clock-adc-gfclk-mux@1dc { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "adc_gfclk_mux"; clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>; reg = <0x01dc>; }; - sys_clk1_dclk_div: sys_clk1_dclk_div@1c8 { + sys_clk1_dclk_div: clock-sys-clk1-dclk-div@1c8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "sys_clk1_dclk_div"; clocks = <&sys_clkin1>; ti,max-div = <64>; reg = <0x01c8>; ti,index-power-of-two; }; - sys_clk2_dclk_div: sys_clk2_dclk_div@1cc { + sys_clk2_dclk_div: clock-sys-clk2-dclk-div@1cc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "sys_clk2_dclk_div"; clocks = <&sys_clkin2>; ti,max-div = <64>; reg = <0x01cc>; ti,index-power-of-two; }; - per_abe_x1_dclk_div: per_abe_x1_dclk_div@1bc { + per_abe_x1_dclk_div: clock-per-abe-x1-dclk-div@1bc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "per_abe_x1_dclk_div"; clocks = <&dpll_abe_m2_ck>; ti,max-div = <64>; reg = <0x01bc>; ti,index-power-of-two; }; - dsp_gclk_div: dsp_gclk_div@18c { + dsp_gclk_div: clock-dsp-gclk-div@18c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dsp_gclk_div"; clocks = <&dpll_dsp_m2_ck>; ti,max-div = <64>; reg = <0x018c>; ti,index-power-of-two; }; - gpu_dclk: gpu_dclk@1a0 { + gpu_dclk: clock-gpu-dclk@1a0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "gpu_dclk"; clocks = <&dpll_gpu_m2_ck>; ti,max-div = <64>; reg = <0x01a0>; ti,index-power-of-two; }; - emif_phy_dclk_div: emif_phy_dclk_div@190 { + emif_phy_dclk_div: clock-emif-phy-dclk-div@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "emif_phy_dclk_div"; clocks = <&dpll_ddr_m2_ck>; ti,max-div = <64>; reg = <0x0190>; ti,index-power-of-two; }; - gmac_250m_dclk_div: gmac_250m_dclk_div@19c { + gmac_250m_dclk_div: clock-gmac-250m-dclk-div@19c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "gmac_250m_dclk_div"; clocks = <&dpll_gmac_m2_ck>; ti,max-div = <64>; reg = <0x019c>; ti,index-power-of-two; }; - gmac_main_clk: gmac_main_clk { + gmac_main_clk: clock-gmac-main { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "gmac_main_clk"; clocks = <&gmac_250m_dclk_div>; clock-mult = <1>; clock-div = <2>; }; - l3init_480m_dclk_div: l3init_480m_dclk_div@1ac { + l3init_480m_dclk_div: clock-l3init-480m-dclk-div@1ac { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3init_480m_dclk_div"; clocks = <&dpll_usb_m2_ck>; ti,max-div = <64>; reg = <0x01ac>; ti,index-power-of-two; }; - usb_otg_dclk_div: usb_otg_dclk_div@184 { + usb_otg_dclk_div: clock-usb-otg-dclk-div@184 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "usb_otg_dclk_div"; clocks = <&usb_otg_clkin_ck>; ti,max-div = <64>; reg = <0x0184>; ti,index-power-of-two; }; - sata_dclk_div: sata_dclk_div@1c0 { + sata_dclk_div: clock-sata-dclk-div@1c0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "sata_dclk_div"; clocks = <&sys_clkin1>; ti,max-div = <64>; reg = <0x01c0>; ti,index-power-of-two; }; - pcie2_dclk_div: pcie2_dclk_div@1b8 { + pcie2_dclk_div: clock-pcie2-dclk-div@1b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "pcie2_dclk_div"; clocks = <&dpll_pcie_ref_m2_ck>; ti,max-div = <64>; reg = <0x01b8>; ti,index-power-of-two; }; - pcie_dclk_div: pcie_dclk_div@1b4 { + pcie_dclk_div: clock-pcie-dclk-div@1b4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "pcie_dclk_div"; clocks = <&apll_pcie_m2_ck>; ti,max-div = <64>; reg = <0x01b4>; ti,index-power-of-two; }; - emu_dclk_div: emu_dclk_div@194 { + emu_dclk_div: clock-emu-dclk-div@194 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "emu_dclk_div"; clocks = <&sys_clkin1>; ti,max-div = <64>; reg = <0x0194>; ti,index-power-of-two; }; - secure_32k_dclk_div: secure_32k_dclk_div@1c4 { + secure_32k_dclk_div: clock-secure-32k-dclk-div@1c4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "secure_32k_dclk_div"; clocks = <&secure_32k_clk_src_ck>; ti,max-div = <64>; reg = <0x01c4>; ti,index-power-of-two; }; - clkoutmux0_clk_mux: clkoutmux0_clk_mux@158 { + clkoutmux0_clk_mux: clock-clkoutmux0-clk-mux@158 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "clkoutmux0_clk_mux"; clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; reg = <0x0158>; }; - clkoutmux1_clk_mux: clkoutmux1_clk_mux@15c { + clkoutmux1_clk_mux: clock-clkoutmux1-clk-mux@15c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "clkoutmux1_clk_mux"; clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; reg = <0x015c>; }; - clkoutmux2_clk_mux: clkoutmux2_clk_mux@160 { + clkoutmux2_clk_mux: clock-clkoutmux2-clk-mux@160 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "clkoutmux2_clk_mux"; clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; reg = <0x0160>; }; - custefuse_sys_gfclk_div: custefuse_sys_gfclk_div { + custefuse_sys_gfclk_div: clock-custefuse-sys-gfclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "custefuse_sys_gfclk_div"; clocks = <&sys_clkin1>; clock-mult = <1>; clock-div = <2>; }; - eve_clk: eve_clk@180 { + eve_clk: clock-eve@180 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "eve_clk"; clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>; reg = <0x0180>; }; - hdmi_dpll_clk_mux: hdmi_dpll_clk_mux@164 { + hdmi_dpll_clk_mux: clock-hdmi-dpll-clk-mux@164 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "hdmi_dpll_clk_mux"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x0164>; }; - mlb_clk: mlb_clk@134 { + mlb_clk: clock-mlb@134 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "mlb_clk"; clocks = <&mlb_clkin_ck>; ti,max-div = <64>; reg = <0x0134>; ti,index-power-of-two; }; - mlbp_clk: mlbp_clk@130 { + mlbp_clk: clock-mlbp@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "mlbp_clk"; clocks = <&mlbp_clkin_ck>; ti,max-div = <64>; reg = <0x0130>; ti,index-power-of-two; }; - per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div@138 { + per_abe_x1_gfclk2_div: clock-per-abe-x1-gfclk2-div@138 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "per_abe_x1_gfclk2_div"; clocks = <&dpll_abe_m2_ck>; ti,max-div = <64>; reg = <0x0138>; ti,index-power-of-two; }; - timer_sys_clk_div: timer_sys_clk_div@144 { + timer_sys_clk_div: clock-timer-sys-clk-div@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "timer_sys_clk_div"; clocks = <&sys_clkin1>; reg = <0x0144>; ti,max-div = <2>; }; - video1_dpll_clk_mux: video1_dpll_clk_mux@168 { + video1_dpll_clk_mux: clock-video1-dpll-clk-mux@168 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "video1_dpll_clk_mux"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x0168>; }; - video2_dpll_clk_mux: video2_dpll_clk_mux@16c { + video2_dpll_clk_mux: clock-video2-dpll-clk-mux@16c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "video2_dpll_clk_mux"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x016c>; }; - wkupaon_iclk_mux: wkupaon_iclk_mux@108 { + wkupaon_iclk_mux: clock-wkupaon-iclk-mux@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "wkupaon_iclk_mux"; clocks = <&sys_clkin1>, <&abe_lp_clk_div>; reg = <0x0108>; }; }; &cm_core_clocks { - dpll_pcie_ref_ck: dpll_pcie_ref_ck@200 { + dpll_pcie_ref_ck: clock@200 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_pcie_ref_ck"; clocks = <&sys_clkin1>, <&sys_clkin1>; reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>; }; - dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck@210 { + dpll_pcie_ref_m2ldo_ck: clock-dpll-pcie-ref-m2ldo-8@210 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_pcie_ref_m2ldo_ck"; clocks = <&dpll_pcie_ref_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -1132,23 +1271,26 @@ ti,invert-autoidle-bit; }; - apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 { + apll_pcie_in_clk_mux: clock-apll-pcie-in-clk-mux-7@4ae06118 { compatible = "ti,mux-clock"; + clock-output-names = "apll_pcie_in_clk_mux"; clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>; #clock-cells = <0>; reg = <0x021c 0x4>; ti,bit-shift = <7>; }; - apll_pcie_ck: apll_pcie_ck@21c { + apll_pcie_ck: clock@21c { #clock-cells = <0>; compatible = "ti,dra7-apll-clock"; + clock-output-names = "apll_pcie_ck"; clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>; reg = <0x021c>, <0x0220>; }; - optfclk_pciephy_div: optfclk_pciephy_div@4a00821c { + optfclk_pciephy_div: clock-optfclk-pciephy-div-8@4a00821c { compatible = "ti,divider-clock"; + clock-output-names = "optfclk_pciephy_div"; clocks = <&apll_pcie_ck>; #clock-cells = <0>; reg = <0x021c>; @@ -1157,48 +1299,54 @@ ti,max-div = <2>; }; - apll_pcie_clkvcoldo: apll_pcie_clkvcoldo { + apll_pcie_clkvcoldo: clock-apll-pcie-clkvcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "apll_pcie_clkvcoldo"; clocks = <&apll_pcie_ck>; clock-mult = <1>; clock-div = <1>; }; - apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div { + apll_pcie_clkvcoldo_div: clock-apll-pcie-clkvcoldo-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "apll_pcie_clkvcoldo_div"; clocks = <&apll_pcie_ck>; clock-mult = <1>; clock-div = <1>; }; - apll_pcie_m2_ck: apll_pcie_m2_ck { + apll_pcie_m2_ck: clock-apll-pcie-m2 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "apll_pcie_m2_ck"; clocks = <&apll_pcie_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_per_byp_mux: dpll_per_byp_mux@14c { + dpll_per_byp_mux: clock-dpll-per-byp-mux-23@14c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_per_byp_mux"; clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x014c>; }; - dpll_per_ck: dpll_per_ck@140 { + dpll_per_ck: clock@140 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_per_ck"; clocks = <&sys_clkin1>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; - dpll_per_m2_ck: dpll_per_m2_ck@150 { + dpll_per_m2_ck: clock-dpll-per-m2-8@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2_ck"; clocks = <&dpll_per_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -1207,32 +1355,36 @@ ti,invert-autoidle-bit; }; - func_96m_aon_dclk_div: func_96m_aon_dclk_div { + func_96m_aon_dclk_div: clock-func-96m-aon-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_96m_aon_dclk_div"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_usb_byp_mux: dpll_usb_byp_mux@18c { + dpll_usb_byp_mux: clock-dpll-usb-byp-mux-23@18c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_usb_byp_mux"; clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x018c>; }; - dpll_usb_ck: dpll_usb_ck@180 { + dpll_usb_ck: clock@180 { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; + clock-output-names = "dpll_usb_ck"; clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; - dpll_usb_m2_ck: dpll_usb_m2_ck@190 { + dpll_usb_m2_ck: clock-dpll-usb-m2-8@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_usb_m2_ck"; clocks = <&dpll_usb_ck>; ti,max-div = <127>; ti,autoidle-shift = <8>; @@ -1241,9 +1393,10 @@ ti,invert-autoidle-bit; }; - dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck@210 { + dpll_pcie_ref_m2_ck: clock-dpll-pcie-ref-m2-8@210 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_pcie_ref_m2_ck"; clocks = <&dpll_pcie_ref_ck>; ti,max-div = <127>; ti,autoidle-shift = <8>; @@ -1252,15 +1405,17 @@ ti,invert-autoidle-bit; }; - dpll_per_x2_ck: dpll_per_x2_ck { + dpll_per_x2_ck: clock-dpll-per-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_per_x2_ck"; clocks = <&dpll_per_ck>; }; - dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 { + dpll_per_h11x2_ck: clock-dpll-per-h11x2-8@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h11x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -1269,9 +1424,10 @@ ti,invert-autoidle-bit; }; - dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c { + dpll_per_h12x2_ck: clock-dpll-per-h12x2-8@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h12x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -1280,9 +1436,10 @@ ti,invert-autoidle-bit; }; - dpll_per_h13x2_ck: dpll_per_h13x2_ck@160 { + dpll_per_h13x2_ck: clock-dpll-per-h13x2-8@160 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h13x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -1291,9 +1448,10 @@ ti,invert-autoidle-bit; }; - dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 { + dpll_per_h14x2_ck: clock-dpll-per-h14x2-8@164 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h14x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -1302,9 +1460,10 @@ ti,invert-autoidle-bit; }; - dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 { + dpll_per_m2x2_ck: clock-dpll-per-m2x2-8@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -1313,105 +1472,118 @@ ti,invert-autoidle-bit; }; - dpll_usb_clkdcoldo: dpll_usb_clkdcoldo { + dpll_usb_clkdcoldo: clock-dpll-usb-clkdcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_usb_clkdcoldo"; clocks = <&dpll_usb_ck>; clock-mult = <1>; clock-div = <1>; }; - func_128m_clk: func_128m_clk { + func_128m_clk: clock-func-128m { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_128m_clk"; clocks = <&dpll_per_h11x2_ck>; clock-mult = <1>; clock-div = <2>; }; - func_12m_fclk: func_12m_fclk { + func_12m_fclk: clock-func-12m-fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_12m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <16>; }; - func_24m_clk: func_24m_clk { + func_24m_clk: clock-func-24m { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_24m_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; }; - func_48m_fclk: func_48m_fclk { + func_48m_fclk: clock-func-48m-fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_48m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <4>; }; - func_96m_fclk: func_96m_fclk { + func_96m_fclk: clock-func-96m-fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_96m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <2>; }; - l3init_60m_fclk: l3init_60m_fclk@104 { + l3init_60m_fclk: clock-l3init-60m@104 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3init_60m_fclk"; clocks = <&dpll_usb_m2_ck>; reg = <0x0104>; ti,dividers = <1>, <8>; }; - clkout2_clk: clkout2_clk@6b0 { + clkout2_clk: clock-clkout2-8@6b0 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "clkout2_clk"; clocks = <&clkoutmux2_clk_mux>; ti,bit-shift = <8>; reg = <0x06b0>; }; - l3init_960m_gfclk: l3init_960m_gfclk@6c0 { + l3init_960m_gfclk: clock-l3init-960m-gfclk-8@6c0 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "l3init_960m_gfclk"; clocks = <&dpll_usb_clkdcoldo>; ti,bit-shift = <8>; reg = <0x06c0>; }; - usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@640 { + usb_phy1_always_on_clk32k: clock-usb-phy1-always-on-clk32k-8@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy1_always_on_clk32k"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x0640>; }; - usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k@688 { + usb_phy2_always_on_clk32k: clock-usb-phy2-always-on-clk32k-8@688 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy2_always_on_clk32k"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x0688>; }; - usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k@698 { + usb_phy3_always_on_clk32k: clock-usb-phy3-always-on-clk32k-8@698 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy3_always_on_clk32k"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x0698>; }; - gpu_core_gclk_mux: gpu_core_gclk_mux@1220 { + gpu_core_gclk_mux: clock-gpu-core-gclk-mux-24@1220 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpu_core_gclk_mux"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; ti,bit-shift = <24>; reg = <0x1220>; @@ -1419,9 +1591,10 @@ assigned-clock-parents = <&dpll_gpu_m2_ck>; }; - gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1220 { + gpu_hyd_gclk_mux: clock-gpu-hyd-gclk-mux-26@1220 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpu_hyd_gclk_mux"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; ti,bit-shift = <26>; reg = <0x1220>; @@ -1429,34 +1602,38 @@ assigned-clock-parents = <&dpll_gpu_m2_ck>; }; - l3instr_ts_gclk_div: l3instr_ts_gclk_div@e50 { + l3instr_ts_gclk_div: clock-l3instr-ts-gclk-div-24@e50 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3instr_ts_gclk_div"; clocks = <&wkupaon_iclk_mux>; ti,bit-shift = <24>; reg = <0x0e50>; ti,dividers = <8>, <16>, <32>; }; - vip1_gclk_mux: vip1_gclk_mux@1020 { + vip1_gclk_mux: clock-vip1-gclk-mux-24@1020 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "vip1_gclk_mux"; clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; ti,bit-shift = <24>; reg = <0x1020>; }; - vip2_gclk_mux: vip2_gclk_mux@1028 { + vip2_gclk_mux: clock-vip2-gclk-mux-24@1028 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "vip2_gclk_mux"; clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; ti,bit-shift = <24>; reg = <0x1028>; }; - vip3_gclk_mux: vip3_gclk_mux@1030 { + vip3_gclk_mux: clock-vip3-gclk-mux-24@1030 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "vip3_gclk_mux"; clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; ti,bit-shift = <24>; reg = <0x1030>; @@ -1464,48 +1641,54 @@ }; &cm_core_clockdomains { - coreaon_clkdm: coreaon_clkdm { + coreaon_clkdm: clock-coreaon-clkdm { compatible = "ti,clockdomain"; + clock-output-names = "coreaon_clkdm"; clocks = <&dpll_usb_ck>; }; }; &scm_conf_clocks { - dss_deshdcp_clk: dss_deshdcp_clk@558 { + dss_deshdcp_clk: clock-dss-deshdcp-0@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "dss_deshdcp_clk"; clocks = <&l3_iclk_div>; ti,bit-shift = <0>; reg = <0x558>; }; - ehrpwm0_tbclk: ehrpwm0_tbclk@558 { + ehrpwm0_tbclk: clock-ehrpwm0-tbclk-20@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm0_tbclk"; clocks = <&l4_root_clk_div>; ti,bit-shift = <20>; reg = <0x0558>; }; - ehrpwm1_tbclk: ehrpwm1_tbclk@558 { + ehrpwm1_tbclk: clock-ehrpwm1-tbclk-21@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm1_tbclk"; clocks = <&l4_root_clk_div>; ti,bit-shift = <21>; reg = <0x0558>; }; - ehrpwm2_tbclk: ehrpwm2_tbclk@558 { + ehrpwm2_tbclk: clock-ehrpwm2-tbclk-22@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm2_tbclk"; clocks = <&l4_root_clk_div>; ti,bit-shift = <22>; reg = <0x0558>; }; - sys_32k_ck: sys_32k_ck { + sys_32k_ck: clock-sys-32k { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_32k_ck"; clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>; ti,bit-shift = <8>; reg = <0x6c4>; @@ -1513,97 +1696,110 @@ }; &cm_core_aon { - mpu_cm: mpu-cm@300 { + mpu_cm: clock@300 { compatible = "ti,omap4-cm"; + clock-output-names = "mpu_cm"; reg = <0x300 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x300 0x100>; - mpu_clkctrl: mpu-clkctrl@20 { + mpu_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "mpu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - dsp1_cm: dsp1-cm@400 { + dsp1_cm: clock@400 { compatible = "ti,omap4-cm"; + clock-output-names = "dsp1_cm"; reg = <0x400 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x400 0x100>; - dsp1_clkctrl: dsp1-clkctrl@20 { + dsp1_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "dsp1_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - ipu_cm: ipu-cm@500 { + ipu_cm: clock@500 { compatible = "ti,omap4-cm"; + clock-output-names = "ipu_cm"; reg = <0x500 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x500 0x100>; - ipu1_clkctrl: ipu1-clkctrl@20 { + ipu1_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "ipu1_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; assigned-clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 24>; assigned-clock-parents = <&dpll_core_h22x2_ck>; }; - ipu_clkctrl: ipu-clkctrl@50 { + ipu_clkctrl: clock@50 { compatible = "ti,clkctrl"; + clock-output-names = "ipu_clkctrl"; reg = <0x50 0x34>; #clock-cells = <2>; }; }; - dsp2_cm: dsp2-cm@600 { + dsp2_cm: clock@600 { compatible = "ti,omap4-cm"; + clock-output-names = "dsp2_cm"; reg = <0x600 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x600 0x100>; - dsp2_clkctrl: dsp2-clkctrl@20 { + dsp2_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "dsp2_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - rtc_cm: rtc-cm@700 { + rtc_cm: clock@700 { compatible = "ti,omap4-cm"; + clock-output-names = "rtc_cm"; reg = <0x700 0x60>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x700 0x60>; - rtc_clkctrl: rtc-clkctrl@20 { + rtc_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "rtc_clkctrl"; reg = <0x20 0x28>; #clock-cells = <2>; }; }; - vpe_cm: vpe-cm@760 { + vpe_cm: clock@760 { compatible = "ti,omap4-cm"; + clock-output-names = "vpe_cm"; reg = <0x760 0xc>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x760 0xc>; - vpe_clkctrl: vpe-clkctrl@0 { + vpe_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "vpe_clkctrl"; reg = <0x0 0xc>; #clock-cells = <2>; }; @@ -1612,212 +1808,242 @@ }; &cm_core { - coreaon_cm: coreaon-cm@600 { + coreaon_cm: clock@600 { compatible = "ti,omap4-cm"; + clock-output-names = "coreaon_cm"; reg = <0x600 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x600 0x100>; - coreaon_clkctrl: coreaon-clkctrl@20 { + coreaon_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "coreaon_clkctrl"; reg = <0x20 0x1c>; #clock-cells = <2>; }; }; - l3main1_cm: l3main1-cm@700 { + l3main1_cm: clock@700 { compatible = "ti,omap4-cm"; + clock-output-names = "l3main1_cm"; reg = <0x700 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x700 0x100>; - l3main1_clkctrl: l3main1-clkctrl@20 { + l3main1_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3main1_clkctrl"; reg = <0x20 0x74>; #clock-cells = <2>; }; }; - ipu2_cm: ipu2-cm@900 { + ipu2_cm: clock@900 { compatible = "ti,omap4-cm"; + clock-output-names = "ipu2_cm"; reg = <0x900 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x900 0x100>; - ipu2_clkctrl: ipu2-clkctrl@20 { + ipu2_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "ipu2_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - dma_cm: dma-cm@a00 { + dma_cm: clock@a00 { compatible = "ti,omap4-cm"; + clock-output-names = "dma_cm"; reg = <0xa00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xa00 0x100>; - dma_clkctrl: dma-clkctrl@20 { + dma_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "dma_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - emif_cm: emif-cm@b00 { + emif_cm: clock@b00 { compatible = "ti,omap4-cm"; + clock-output-names = "emif_cm"; reg = <0xb00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xb00 0x100>; - emif_clkctrl: emif-clkctrl@20 { + emif_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "emif_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - atl_cm: atl-cm@c00 { + atl_cm: clock@c00 { compatible = "ti,omap4-cm"; + clock-output-names = "atl_cm"; reg = <0xc00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xc00 0x100>; - atl_clkctrl: atl-clkctrl@0 { + atl_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "atl_clkctrl"; reg = <0x0 0x4>; #clock-cells = <2>; }; }; - l4cfg_cm: l4cfg-cm@d00 { + l4cfg_cm: clock@d00 { compatible = "ti,omap4-cm"; + clock-output-names = "l4cfg_cm"; reg = <0xd00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xd00 0x100>; - l4cfg_clkctrl: l4cfg-clkctrl@20 { + l4cfg_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4cfg_clkctrl"; reg = <0x20 0x84>; #clock-cells = <2>; }; }; - l3instr_cm: l3instr-cm@e00 { + l3instr_cm: clock@e00 { compatible = "ti,omap4-cm"; + clock-output-names = "l3instr_cm"; reg = <0xe00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xe00 0x100>; - l3instr_clkctrl: l3instr-clkctrl@20 { + l3instr_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3instr_clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; }; - iva_cm: iva-cm@f00 { + iva_cm: clock@f00 { compatible = "ti,omap4-cm"; + clock-output-names = "iva_cm"; reg = <0xf00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xf00 0x100>; - iva_clkctrl: iva-clkctrl@20 { + iva_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "iva_clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; }; - cam_cm: cam-cm@1000 { + cam_cm: clock@1000 { compatible = "ti,omap4-cm"; + clock-output-names = "cam_cm"; reg = <0x1000 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1000 0x100>; - cam_clkctrl: cam-clkctrl@20 { + cam_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "cam_clkctrl"; reg = <0x20 0x2c>; #clock-cells = <2>; }; }; - dss_cm: dss-cm@1100 { + dss_cm: clock@1100 { compatible = "ti,omap4-cm"; + clock-output-names = "dss_cm"; reg = <0x1100 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1100 0x100>; - dss_clkctrl: dss-clkctrl@20 { + dss_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "dss_clkctrl"; reg = <0x20 0x14>; #clock-cells = <2>; }; }; - gpu_cm: gpu-cm@1200 { + gpu_cm: clock@1200 { compatible = "ti,omap4-cm"; + clock-output-names = "gpu_cm"; reg = <0x1200 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1200 0x100>; - gpu_clkctrl: gpu-clkctrl@20 { + gpu_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "gpu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - l3init_cm: l3init-cm@1300 { + l3init_cm: clock@1300 { compatible = "ti,omap4-cm"; + clock-output-names = "l3init_cm"; reg = <0x1300 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1300 0x100>; - l3init_clkctrl: l3init-clkctrl@20 { + l3init_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3init_clkctrl"; reg = <0x20 0x6c>, <0xe0 0x14>; #clock-cells = <2>; }; - pcie_clkctrl: pcie-clkctrl@b0 { + pcie_clkctrl: clock@b0 { compatible = "ti,clkctrl"; + clock-output-names = "pcie_clkctrl"; reg = <0xb0 0xc>; #clock-cells = <2>; }; - gmac_clkctrl: gmac-clkctrl@d0 { + gmac_clkctrl: clock@d0 { compatible = "ti,clkctrl"; + clock-output-names = "gmac_clkctrl"; reg = <0xd0 0x4>; #clock-cells = <2>; }; }; - l4per_cm: l4per-cm@1700 { + l4per_cm: clock@1700 { compatible = "ti,omap4-cm"; + clock-output-names = "l4per_cm"; reg = <0x1700 0x300>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1700 0x300>; - l4per_clkctrl: l4per-clkctrl@28 { + l4per_clkctrl: clock@28 { compatible = "ti,clkctrl"; + clock-output-names = "l4per_clkctrl"; reg = <0x28 0x64>, <0xa0 0x24>, <0xf0 0x3c>, <0x140 0x1c>, <0x170 0x4>; #clock-cells = <2>; @@ -1825,20 +2051,23 @@ assigned-clock-parents = <&abe_24m_fclk>; }; - l4sec_clkctrl: l4sec-clkctrl@1a0 { + l4sec_clkctrl: clock@1a0 { compatible = "ti,clkctrl"; + clock-output-names = "l4sec_clkctrl"; reg = <0x1a0 0x2c>; #clock-cells = <2>; }; - l4per2_clkctrl: l4per2-clkctrl@c { + l4per2_clkctrl: clock@c { compatible = "ti,clkctrl"; + clock-output-names = "l4per2_clkctrl"; reg = <0xc 0x4>, <0x18 0xc>, <0x90 0xc>, <0xc4 0x4>, <0x138 0x4>, <0x160 0xc>, <0x178 0x24>, <0x1d0 0x3c>; #clock-cells = <2>; }; - l4per3_clkctrl: l4per3-clkctrl@14 { + l4per3_clkctrl: clock@14 { compatible = "ti,clkctrl"; + clock-output-names = "l4per3_clkctrl"; reg = <0x14 0x4>, <0xc8 0x14>, <0x130 0x4>; #clock-cells = <2>; }; @@ -1847,15 +2076,17 @@ }; &prm { - wkupaon_cm: wkupaon-cm@1800 { + wkupaon_cm: clock@1800 { compatible = "ti,omap4-cm"; + clock-output-names = "wkupaon_cm"; reg = <0x1800 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1800 0x100>; - wkupaon_clkctrl: wkupaon-clkctrl@20 { + wkupaon_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "wkupaon_clkctrl"; reg = <0x20 0x6c>; #clock-cells = <2>; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index ae644315855d..78dad233ff34 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -269,7 +269,8 @@ }; timer@10050000 { - compatible = "samsung,exynos4210-mct"; + compatible = "samsung,exynos3250-mct", + "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, @@ -428,8 +429,6 @@ clocks = <&cmu CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@12690000 { @@ -439,8 +438,6 @@ clocks = <&cmu CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; adc: adc@126c0000 { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index e81b3ee4e0f7..6f0ca3354e39 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -373,7 +373,7 @@ status = "disabled"; }; - ehci: ehci@12580000 { + ehci: usb@12580000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12580000 0x100>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; @@ -384,7 +384,7 @@ phy-names = "host", "hsic0", "hsic1"; }; - ohci: ohci@12590000 { + ohci: usb@12590000 { compatible = "samsung,exynos4210-ohci"; reg = <0x12590000 0x100>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; @@ -676,8 +676,6 @@ clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@12690000 { @@ -687,8 +685,6 @@ clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; mdma1: dma-controller@12850000 { @@ -698,8 +694,6 @@ clocks = <&clock CLK_MDMA>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; }; fimd: fimd@11c00000 { diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 138d606d58a5..62bf335d5bed 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -666,8 +666,6 @@ clocks = <&clock CLK_MDMA>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; power-domains = <&pd_lcd0>; }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index efaf7533e84f..36c369c42b77 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -119,8 +119,8 @@ phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>; phy-names = "hsic0", "hsic1"; - ethernet: usbether@2 { - compatible = "usb0424,9730"; + ethernet: ethernet@2 { + compatible = "usb424,9730"; reg = <2>; local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ }; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index a9fada51eb50..1f17cc30ed14 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -70,19 +70,19 @@ phy-names = "hsic0"; hub@2 { - compatible = "usb0424,3503"; + compatible = "usb424,3503"; reg = <2>; #address-cells = <1>; #size-cells = <0>; hub@1 { - compatible = "usb0424,9514"; + compatible = "usb424,9514"; reg = <1>; #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { - compatible = "usb0424,ec00"; + ethernet: ethernet@1 { + compatible = "usb424,ec00"; reg = <1>; /* Filled in by a bootloader */ local-mac-address = [00 00 00 00 00 00]; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 21fbbf3d8684..71293749ac48 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -129,7 +129,7 @@ samsung,i2c-max-bus-freq = <20000>; eeprom@50 { - compatible = "samsung,s524ad0xd1"; + compatible = "samsung,s524ad0xd1", "atmel,24c128"; reg = <0x50>; }; @@ -289,7 +289,7 @@ samsung,i2c-max-bus-freq = <20000>; eeprom@51 { - compatible = "samsung,s524ad0xd1"; + compatible = "samsung,s524ad0xd1", "atmel,24c128"; reg = <0x51>; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 5baaa7eb71a4..4708dcd575a7 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -245,7 +245,8 @@ }; timer@101c0000 { - compatible = "samsung,exynos4210-mct"; + compatible = "samsung,exynos5250-mct", + "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; clock-names = "fin_pll", "mct"; @@ -699,8 +700,6 @@ clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@121b0000 { @@ -710,8 +709,6 @@ clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; mdma0: dma-controller@10800000 { @@ -721,8 +718,6 @@ clocks = <&clock CLK_MDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; }; mdma1: dma-controller@11c10000 { @@ -732,8 +727,6 @@ clocks = <&clock CLK_MDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; }; gsc_0: gsc@13e00000 { @@ -817,15 +810,14 @@ status = "disabled"; }; - dp_phy: video-phy { + dp_phy: video-phy-0 { compatible = "samsung,exynos5250-dp-video-phy"; samsung,pmu-syscon = <&pmu_system_controller>; #phy-cells = <0>; }; - mipi_phy: video-phy@10040710 { + mipi_phy: video-phy-1 { compatible = "samsung,s5pv210-mipi-video-phy"; - reg = <0x10040710 0x100>; #phy-cells = <1>; syscon = <&pmu_system_controller>; }; diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi index 56271e7c4587..ff1ee409eff3 100644 --- a/arch/arm/boot/dts/exynos5260.dtsi +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -333,7 +333,8 @@ }; mct: timer@100b0000 { - compatible = "samsung,exynos4210-mct"; + compatible = "samsung,exynos5260-mct", + "samsung,exynos4210-mct"; reg = <0x100B0000 0x1000>; clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; clock-names = "fin_pll", "mct"; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index e54a3391854d..d1cbc6b8a570 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -655,8 +655,8 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@2 { - compatible = "usb0424,9730"; + ethernet: ethernet@2 { + compatible = "usb424,9730"; reg = <2>; local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ }; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 4d797a9abba4..8a6b890fb8f7 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -196,8 +196,6 @@ clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@121b0000 { @@ -207,8 +205,6 @@ clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; audi2s0: i2s@3830000 { diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 21b608705049..9f2523a873d9 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -437,8 +437,6 @@ clocks = <&clock_audss EXYNOS_ADMA>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <6>; - #dma-requests = <16>; power-domains = <&mau_pd>; }; @@ -449,8 +447,6 @@ clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@121b0000 { @@ -460,8 +456,6 @@ clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; mdma0: dma-controller@10800000 { @@ -471,8 +465,6 @@ clocks = <&clock CLK_MDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; }; mdma1: dma-controller@11c10000 { @@ -482,8 +474,6 @@ clocks = <&clock CLK_MDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; /* * MDMA1 can support both secure and non-secure * AXI transactions. When this is enabled in diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index 2f65dcf6ba73..35818c4cd852 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -333,8 +333,6 @@ compatible = "samsung,K3QF2F20DB", "jedec,lpddr3"; density = <16384>; io-width = <32>; - #address-cells = <1>; - #size-cells = <0>; tRFC-min-tck = <17>; tRRD-min-tck = <2>; @@ -358,10 +356,9 @@ tCKESR-min-tck = <2>; tMRD-min-tck = <5>; - timings_samsung_K3QF2F20DB_800mhz: timings@800000000 { + timings_samsung_K3QF2F20DB_800mhz: timings { compatible = "jedec,lpddr3-timings"; - /* workaround: 'reg' shows max-freq */ - reg = <800000000>; + max-freq = <800000000>; min-freq = <100000000>; tRFC = <65000>; tRRD = <6000>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts index 62c5928aa994..e3154a1cae23 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts @@ -113,13 +113,13 @@ #size-cells = <0>; hub@1 { - compatible = "usb0424,9514"; + compatible = "usb424,9514"; reg = <1>; #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { - compatible = "usb0424,ec00"; + ethernet: ethernet@1 { + compatible = "usb424,ec00"; reg = <1>; local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index cecaeb69e623..a378d4937ff7 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -80,13 +80,13 @@ #size-cells = <0>; hub@1 { - compatible = "usb0424,9514"; + compatible = "usb424,9514"; reg = <1>; #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { - compatible = "usb0424,ec00"; + ethernet: ethernet@1 { + compatible = "usb424,ec00"; reg = <1>; local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ }; diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi index 2ddb7a5f12b3..3ec43761d8b9 100644 --- a/arch/arm/boot/dts/exynos54xx.dtsi +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -74,7 +74,8 @@ }; mct: timer@101c0000 { - compatible = "samsung,exynos4210-mct"; + compatible = "samsung,exynos5420-mct", + "samsung,exynos4210-mct"; reg = <0x101c0000 0xb00>; interrupts-extended = <&combiner 23 3>, <&combiner 23 4>, diff --git a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts new file mode 100644 index 000000000000..3a7382ce40ef --- /dev/null +++ b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for HPE DL360Gen10 + */ + +/include/ "hpe-gxp.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "hpe,gxp-dl360gen10", "hpe,gxp"; + model = "Hewlett Packard Enterprise ProLiant dl360 Gen10"; + + aliases { + serial0 = &uartc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x20000000>; + }; +}; diff --git a/arch/arm/boot/dts/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe-gxp.dtsi new file mode 100644 index 000000000000..cf735b3c4f35 --- /dev/null +++ b/arch/arm/boot/dts/hpe-gxp.dtsi @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for HPE GXP + */ + +/dts-v1/; +/ { + model = "Hewlett Packard Enterprise GXP BMC"; + compatible = "hpe,gxp"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + device_type = "cpu"; + next-level-cache = <&L2>; + }; + }; + + clocks { + pll: clock-0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1600000000>; + }; + + iopclk: clock-1 { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clocks = <&pll>; + }; + }; + + axi { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + dma-ranges; + + L2: cache-controller@b0040000 { + compatible = "arm,pl310-cache"; + reg = <0xb0040000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + ahb@c0000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc0000000 0x30000000>; + dma-ranges; + + vic0: interrupt-controller@eff0000 { + compatible = "arm,pl192-vic"; + reg = <0xeff0000 0x1000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + vic1: interrupt-controller@80f00000 { + compatible = "arm,pl192-vic"; + reg = <0x80f00000 0x1000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uarta: serial@e0 { + compatible = "ns16550a"; + reg = <0xe0 0x8>; + interrupts = <17>; + interrupt-parent = <&vic0>; + clock-frequency = <1846153>; + reg-shift = <0>; + }; + + uartb: serial@e8 { + compatible = "ns16550a"; + reg = <0xe8 0x8>; + interrupts = <18>; + interrupt-parent = <&vic0>; + clock-frequency = <1846153>; + reg-shift = <0>; + }; + + uartc: serial@f0 { + compatible = "ns16550a"; + reg = <0xf0 0x8>; + interrupts = <19>; + interrupt-parent = <&vic0>; + clock-frequency = <1846153>; + reg-shift = <0>; + }; + + usb0: usb@efe0000 { + compatible = "hpe,gxp-ehci", "generic-ehci"; + reg = <0xefe0000 0x100>; + interrupts = <7>; + interrupt-parent = <&vic0>; + }; + + st: timer@80 { + compatible = "hpe,gxp-timer"; + reg = <0x80 0x16>; + interrupts = <0>; + interrupt-parent = <&vic0>; + clocks = <&iopclk>; + clock-names = "iop"; + }; + + usb1: usb@efe0100 { + compatible = "hpe,gxp-ohci", "generic-ohci"; + reg = <0xefe0100 0x110>; + interrupts = <6>; + interrupt-parent = <&vic0>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index fd525c3b16fa..b660c7d05584 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -96,7 +96,7 @@ <&clks IMX27_CLK_DMA_AHB_GATE>; clock-names = "ipg", "ahb"; #dma-cells = <1>; - #dma-channels = <16>; + dma-channels = <16>; }; wdog: watchdog@10002000 { diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 7e2b0f198dfa..1053b7c584d8 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -129,7 +129,7 @@ pinctrl-0 = <&spi2_pins_a>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "sst,sst25vf016b", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index f3bddc5ada4b..13acdc7916b9 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -33,7 +33,7 @@ pinctrl-0 = <&spi2_pins_a>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts index 43be7a6a769b..90928db0df70 100644 --- a/arch/arm/boot/dts/imx28-sps1.dts +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -51,7 +51,7 @@ pinctrl-0 = <&spi2_pins_a>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "everspin,mr25h256", "mr25h256"; diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts index 097ec35c62d8..0d58da1c0cc5 100644 --- a/arch/arm/boot/dts/imx28-ts4600.dts +++ b/arch/arm/boot/dts/imx28-ts4600.dts @@ -26,7 +26,7 @@ pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg &en_sd_pwr>; - broken-cd = <1>; + broken-cd; bus-width = <4>; vmmc-supply = <®_vddio_sd0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts index aab8d6f137c3..10cae7c3a879 100644 --- a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts +++ b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts @@ -13,6 +13,13 @@ chosen { stdout-path = &uart1; }; + + usbphy1: usbphy1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX5_CLK_USB_PHY_GATE>; + clock-names = "main_clk"; + #phy-cells = <0>; + }; }; &esdhc1 { @@ -63,6 +70,7 @@ &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; + fsl,usbphy = <&usbphy1>; dr_mode = "host"; phy_type = "ulpi"; disable-over-current; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi index 7d4970417dce..f0809a16a2ce 100644 --- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi +++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi @@ -34,22 +34,22 @@ regulators { sw1_reg: sw1 { - regulator-min-microvolt = <1000000>; + regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1100000>; regulator-boot-on; regulator-always-on; }; sw2_reg: sw2 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; + regulator-min-microvolt = <1175000>; + regulator-max-microvolt = <1275000>; regulator-boot-on; regulator-always-on; }; sw3_reg: sw3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1350000>; regulator-boot-on; regulator-always-on; }; @@ -102,18 +102,6 @@ regulator-always-on; }; - vgen1_reg: vgen1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vgen2_reg: vgen2 { - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3150000>; - regulator-always-on; - }; - vgen3_reg: vgen3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -124,8 +112,6 @@ regulator-always-on; }; - gpo1_reg: gpo1 { }; - gpo2_reg: gpo2 { }; gpo3_reg: gpo3 { }; @@ -198,6 +184,7 @@ &usbotg { phy_type = "utmi_wide"; disable-over-current; + vbus-supply = <&swbst_reg>; /* Device role is not known, keep status disabled */ }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 56c8d87864c3..1e20a6639e42 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -215,6 +215,8 @@ clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, <&clks IMX5_CLK_UART3_PER_GATE>; clock-names = "ipg", "per"; + dmas = <&sdma 43 5 1>, <&sdma 44 5 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -426,6 +428,8 @@ clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, <&clks IMX5_CLK_UART1_PER_GATE>; clock-names = "ipg", "per"; + dmas = <&sdma 18 4 1>, <&sdma 19 4 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -436,6 +440,8 @@ clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, <&clks IMX5_CLK_UART2_PER_GATE>; clock-names = "ipg", "per"; + dmas = <&sdma 16 4 1>, <&sdma 17 4 2>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6dl-colibri-aster.dts b/arch/arm/boot/dts/imx6dl-colibri-aster.dts new file mode 100644 index 000000000000..74e8a6cd8bed --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-colibri-aster.dts @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6dl.dtsi" +#include "imx6qdl-colibri.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S on Colibri Aster Board"; + compatible = "toradex,colibri_imx6dl-aster", "toradex,colibri_imx6dl", + "fsl,imx6dl"; + + aliases { + i2c0 = &i2c2; + i2c1 = &i2c3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +/* Colibri SSP */ +&ecspi4 { + cs-gpios = < + &gpio5 2 GPIO_ACTIVE_HIGH + &gpio5 4 GPIO_ACTIVE_HIGH + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4 &pinctrl_csi_gpio_2>; + status = "okay"; +}; + +/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */ +&i2c3 { + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_csi_gpio_1 + &pinctrl_gpio_2 + &pinctrl_gpio_aster + &pinctrl_usbh_oc_1 + &pinctrl_usbc_id_1 + &pinctrl_weim_gpio_5 + >; + + pinctrl_gpio_aster: gpioaster { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + >; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +®_usb_host_vbus { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_host_vbus>; + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +/* Colibri MMC */ +&usdhc1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index 7da74e6f46d9..7272edd85a49 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2014-2020 Toradex + * Copyright 2014-2022 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ @@ -17,12 +17,6 @@ compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl", "fsl,imx6dl"; - /* Will be filled by the bootloader */ - memory@10000000 { - device_type = "memory"; - reg = <0x10000000 0>; - }; - aliases { i2c0 = &i2c2; i2c1 = &i2c3; @@ -44,67 +38,6 @@ clock-frequency = <16000000>; clock-output-names = "clk16m"; }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - wakeup { - label = "Wake-Up"; - gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ - linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; - wakeup-source; - }; - }; - - lcd_display: disp0 { - compatible = "fsl,imx-parallel-display"; - #address-cells = <1>; - #size-cells = <0>; - interface-pix-fmt = "bgr666"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_lcdif>; - status = "okay"; - - port@0 { - reg = <0>; - - lcd_display_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - port@1 { - reg = <1>; - - lcd_display_out: endpoint { - remote-endpoint = <&lcd_panel_in>; - }; - }; - }; - - panel: panel { - /* - * edt,et057090dhu: EDT 5.7" LCD TFT - * edt,et070080dh6: EDT 7.0" LCD TFT - */ - compatible = "edt,et057090dhu"; - backlight = <&backlight>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; -}; - -&backlight { - brightness-levels = <0 127 191 223 239 247 251 255>; - default-brightness-level = <1>; - status = "okay"; }; /* Colibri SSP */ @@ -113,40 +46,21 @@ mcp251x0: mcp251x@0 { compatible = "microchip,mcp2515"; - reg = <0>; clocks = <&clk16m>; interrupt-parent = <&gpio3>; interrupts = <27 0x2>; + reg = <0>; spi-max-frequency = <10000000>; status = "okay"; }; }; -&hdmi { - status = "okay"; -}; - /* * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) */ &i2c3 { status = "okay"; - /* - * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, - * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms - */ - touchscreen@4a { - compatible = "atmel,maxtouch"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pcap_1>; - reg = <0x4a>; - interrupt-parent = <&gpio1>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */ - reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 */ - status = "disabled"; - }; - /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { compatible = "st,m41t0"; @@ -162,24 +76,6 @@ &pinctrl_weim_gpio_5 &pinctrl_weim_gpio_6 &pinctrl_usbh_oc_1 &pinctrl_usbc_id_1 >; - - pinctrl_pcap_1: pcap1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* SODIMM 28 */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* SODIMM 30 */ - >; - }; - - pinctrl_mxt_ts: mxttsgrp { - fsl,pins = < - MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x130b0 /* SODIMM 107 */ - MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x130b0 /* SODIMM 106 */ - >; - }; -}; - -&ipu1_di0_disp0 { - remote-endpoint = <&lcd_display_in>; }; &pwm1 { diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts b/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts new file mode 100644 index 000000000000..3a6d3889760d --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx6dl-colibri-iris.dts" + +/ { + model = "Toradex Colibri iMX6DL/S on Colibri Iris V2 Board"; + compatible = "toradex,colibri_imx6dl-iris-v2", "toradex,colibri_imx6dl", + "fsl,imx6dl"; + + reg_3v3_vmmc: regulator-3v3-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_3v3_vmmc>; + regulator-name = "3v3_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_iris &pinctrl_usbh_oc_1 &pinctrl_usbc_id_1>; + + pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + >; + }; +}; + +/* Colibri MMC */ +&usdhc1 { + cap-power-off-card; + /* uncomment the following to enable SD card UHS mode if you have a V1.1 module */ + /* /delete-property/ no-1-8-v; */ + vmmc-supply = <®_3v3_vmmc>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris.dts b/arch/arm/boot/dts/imx6dl-colibri-iris.dts new file mode 100644 index 000000000000..cf77d894f6d7 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-colibri-iris.dts @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6dl.dtsi" +#include "imx6qdl-colibri.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S on Colibri Iris Board"; + compatible = "toradex,colibri_imx6dl-iris", "toradex,colibri_imx6dl", + "fsl,imx6dl"; + + aliases { + i2c0 = &i2c2; + i2c1 = &i2c3; + }; + + aliases { + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +/* Colibri SSP */ +&ecspi4 { + status = "okay"; +}; + +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_forceoff &pinctrl_uart23_forceoff>; + + /* + * uart-a-on-x13-enable turns the UART transceiver for UART_A on. If one + * wants to turn the transceiver off, that property has to be deleted + * and the gpio handled in userspace. + * The same applies to uart-b-c-on-x14-enable where the UART_B and + * UART_C transceiver is turned on. + */ + uart-a-on-x13-enable-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */ + output-high; + }; + + uart-b-c-on-x14-enable-hog { + gpio-hog; + gpios = <8 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */ + output-high; + }; +}; + +/* + * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) + */ +&i2c3 { + status = "okay"; + + rtc_i2c: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_gpio_iris + &pinctrl_usbh_oc_1 + &pinctrl_usbc_id_1 + >; + + pinctrl_gpio_iris: gpioirisgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0 + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b0b0 + MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x1b0b0 + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b0 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0 + >; + }; + + pinctrl_uart1_forceoff: uart1forceoffgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + >; + }; + + pinctrl_uart23_forceoff: uart23forceoffgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 + >; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +®_usb_host_vbus { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_host_vbus>; + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +/* Colibri MMC */ +&usdhc1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts deleted file mode 100644 index 223275f028f1..000000000000 --- a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts +++ /dev/null @@ -1,31 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/* - * Copyright 2020 Toradex - */ - -/dts-v1/; - -#include "imx6dl-colibri-eval-v3.dts" -#include "imx6qdl-colibri-v1_1-uhs.dtsi" - -/ { - model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3"; - compatible = "toradex,colibri_imx6dl-v1_1-eval-v3", - "toradex,colibri_imx6dl-v1_1", - "toradex,colibri_imx6dl-eval-v3", - "toradex,colibri_imx6dl", - "fsl,imx6dl"; -}; - -/* Colibri MMC */ -&usdhc1 { - status = "okay"; - /* - * Please make sure your carrier board does not pull-up any of - * the MMC/SD signals to 3.3 volt before attempting to activate - * UHS-I support. - * To let signaling voltage be changed to 1.8V, please - * delete no-1-8-v property (example below): - * /delete-property/no-1-8-v; - */ -}; diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts index b4a9523e325b..864dc5018451 100644 --- a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts +++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts @@ -297,7 +297,11 @@ phy-mode = "rmii"; phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; phy-handle = <&phy>; - clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&rmii_clk>, + <&clks IMX6QDL_CLK_ENET_REF>; + clock-names = "ipg", "ahb", "ptp", "enet_out"; status = "okay"; mdio { diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts index bf72a67a9c76..c52e6caf3996 100644 --- a/arch/arm/boot/dts/imx6dl-plybas.dts +++ b/arch/arm/boot/dts/imx6dl-plybas.dts @@ -214,7 +214,7 @@ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - fsl,uart-has-rtscts; + uart-has-rtscts; linux,rs485-enabled-at-boot-time; rs485-rts-delay = <0 20>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts index 0f1616bfa9a8..b72f8ea1e6f6 100644 --- a/arch/arm/boot/dts/imx6dl-rex-basic.dts +++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts @@ -19,7 +19,7 @@ }; &ecspi3 { - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts index 227c952543d4..516ec915a911 100644 --- a/arch/arm/boot/dts/imx6dl-victgo.dts +++ b/arch/arm/boot/dts/imx6dl-victgo.dts @@ -5,46 +5,13 @@ */ /dts-v1/; -#include <dt-bindings/display/sdtv-standards.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/media/tvp5150.h> -#include <dt-bindings/sound/fsl-imx-audmux.h> #include "imx6dl.dtsi" +#include "imx6qdl-vicut1.dtsi" / { model = "Kverneland TGO"; compatible = "kvg,victgo", "fsl,imx6dl"; - chosen { - stdout-path = &uart4; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_backlight>; - pwms = <&pwm1 0 5000000 0>; - brightness-levels = <0 16 64 255>; - num-interpolated-steps = <16>; - default-brightness-level = <1>; - power-supply = <®_3v3>; - enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; - }; - - connector { - compatible = "composite-video-connector"; - label = "Composite0"; - sdtv-standards = <SDTV_STD_PAL_B>; - - port { - comp0_out: endpoint { - remote-endpoint = <&tvp5150_comp0_in>; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -71,36 +38,9 @@ io-channels = <&vdiv_vaccu>, <&vdiv_hitch_pos>; }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_leds>; - - led-0 { - label = "debug0"; - function = LED_FUNCTION_HEARTBEAT; - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - - led-1 { - label = "debug1"; - function = LED_FUNCTION_DISK; - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "disk-activity"; - }; - - led-2 { - label = "power_led"; - function = LED_FUNCTION_POWER; - gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - panel { - compatible = "kyo,tcg121xglp"; - backlight = <&backlight>; + compatible = "lg,lb070wv8"; + backlight = <&backlight_lcd>; power-supply = <®_3v3>; port { @@ -116,38 +56,6 @@ clock-frequency = <50000000>; }; - reg_1v8: regulator-1v8 { - compatible = "regulator-fixed"; - regulator-name = "1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_h1_vbus: regulator-h1-vbus { - compatible = "regulator-fixed"; - regulator-name = "h1-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_otg_vbus: regulator-otg-vbus { - compatible = "regulator-fixed"; - regulator-name = "otg-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - rotary-encoder { compatible = "rotary-encoder"; pinctrl-0 = <&pinctrl_rotary_ch>; @@ -160,33 +68,6 @@ wakeup-source; }; - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "prti6q-sgtl5000"; - simple-audio-card,format = "i2s"; - simple-audio-card,widgets = - "Microphone", "Microphone Jack", - "Line", "Line In Jack", - "Headphone", "Headphone Jack", - "Speaker", "External Speaker"; - simple-audio-card,routing = - "MIC_IN", "Microphone Jack", - "LINE_IN", "Line In Jack", - "Headphone Jack", "HP_OUT", - "External Speaker", "LINE_OUT"; - - simple-audio-card,cpu { - sound-dai = <&ssi1>; - system-clock-frequency = <0>; - }; - - simple-audio-card,codec { - sound-dai = <&codec>; - bitclock-master; - frame-master; - }; - }; - thermal-zones { chassis-thermal { polling-delay = <20000>; @@ -213,7 +94,6 @@ <&adc_ts 5>; io-channel-names = "y", "z1", "z2", "x"; touchscreen-min-pressure = <64687>; - touchscreen-inverted-x; touchscreen-inverted-y; touchscreen-x-plate-ohms = <300>; touchscreen-y-plate-ohms = <800>; @@ -254,61 +134,6 @@ }; }; -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux>; - status = "okay"; - - mux-ssi1 { - fsl,audmux-port = <0>; - fsl,port-config = < - IMX_AUDMUX_V2_PTCR_SYN 0 - IMX_AUDMUX_V2_PTCR_TFSEL(2) 0 - IMX_AUDMUX_V2_PTCR_TCSEL(2) 0 - IMX_AUDMUX_V2_PTCR_TFSDIR 0 - IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2) - >; - }; - - mux-pins3 { - fsl,audmux-port = <2>; - fsl,port-config = < - IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0) - 0 IMX_AUDMUX_V2_PDCR_TXRXEN - >; - }; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can1>; - status = "okay"; -}; - -&can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can2>; - status = "okay"; -}; - -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; -}; - -&ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <20000000>; - }; -}; - &ecspi2 { cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -385,36 +210,19 @@ "CAM2_MIRROR", "", "", "SMBALERT", "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", - "SD1_DATA3", "", "", - "", "", "", "", "", "", "", ""; -}; - -&gpio2 { - gpio-line-names = - "", "", "", "", "", "", "", "", - "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4", - "BOARD_ID0", "BOARD_ID1", "BOARD_ID2", - "", "", "", "", "", "", "ISB_IN1", "ON_SWITCH", - "POWER_LED", "", "", "", "", "", "", ""; -}; - -&gpio3 { - gpio-line-names = - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1", - "CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ", - "TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0", - "YACO_RESET"; + "SD1_DATA3", "ETH_MDIO", "", + "", "", "", "", "", "", "", "ETH_MDC"; }; &gpio4 { gpio-line-names = - "", "", "", "", "", "", "", "", - "", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX", - "", "", "DIP1_FB", "", "VCAM_EN", "", "", "", - "CPU_LIGHT_ON", "", "ETH_RESET", "CPU_CONTACT_IN", "BL_EN", - "BL_PWM", "ETH_INTRP", "ISB_LED"; + "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", + "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", + "CAN2_SR", "CAN2_TX", "CAN2_RX", + "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL", + "HITCH_IN_OUT", + "LIGHT_ON", "", "ETH_RESET", "CONTACT_IN", "BL_EN", + "BL_PWM", "ETH_INT", "ISB_LED"; }; &gpio5 { @@ -422,51 +230,22 @@ "", "", "", "", "", "", "", "", "TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO", "ECSPI2_SS0", "ECSPI2_SCLK", "", "", - "", "", "", "", "", "", "", "", + "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", + "I2S_BITCLK", "I2S_DOUT", "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; }; -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - codec: audio-codec@a { - compatible = "fsl,sgtl5000"; - reg = <0xa>; - #sound-dai-cells = <0>; - clocks = <&clks 201>; - VDDA-supply = <®_3v3>; - VDDIO-supply = <®_3v3>; - VDDD-supply = <®_1v8>; - }; - - video-decoder@5c { - compatible = "ti,tvp5150"; - reg = <0x5c>; - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tvp5150_comp0_in: endpoint { - remote-endpoint = <&comp0_out>; - }; - }; - - /* Output port 2 is video output pad */ - port@2 { - reg = <2>; - - tvp5151_to_ipu1_csi0_mux: endpoint { - remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; - }; - }; - }; +&gpio6 { + gpio-line-names = + "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", + "ITU656_D6", "ITU656_D7", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; +&i2c1 { keypad@70 { compatible = "holtek,ht16k33"; pinctrl-names = "default"; @@ -490,225 +269,9 @@ MATRIX_KEY(6, 1, KEY_F1) >; }; - - /* additional i2c devices are added automatically by the boot loader */ -}; - -&i2c3 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - status = "okay"; - - adc@49 { - compatible = "ti,ads1015"; - reg = <0x49>; - #address-cells = <1>; - #size-cells = <0>; - - channel@4 { - reg = <4>; - ti,gain = <3>; - ti,datarate = <3>; - }; - - channel@5 { - reg = <5>; - ti,gain = <3>; - ti,datarate = <3>; - }; - - channel@6 { - reg = <6>; - ti,gain = <3>; - ti,datarate = <3>; - }; - - channel@7 { - reg = <7>; - ti,gain = <3>; - ti,datarate = <3>; - }; - }; - - rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - - tsens0: temperature-sensor@70 { - compatible = "ti,tmp103"; - reg = <0x70>; - #thermal-sensor-cells = <0>; - }; -}; - -&ipu1_csi0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_csi0>; - status = "okay"; -}; - -&ipu1_csi0_mux_from_parallel_sensor { - remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>; -}; - -&ldb { - status = "okay"; - - lvds-channel@0 { - status = "okay"; - - port@4 { - reg = <4>; - - lvds0_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; -}; - -&pwm1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1>; - status = "okay"; -}; - -&pwm3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm3>; - status = "okay"; -}; - -&ssi1 { - #sound-dai-cells = <0>; - fsl,mode = "ac97-slave"; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_h1_vbus>; - pinctrl-names = "default"; - phy_type = "utmi"; - dr_mode = "host"; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - phy_type = "utmi"; - dr_mode = "host"; - disable-over-current; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - no-1-8-v; - disable-wp; - cap-sd-highspeed; - no-mmc; - no-sdio; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - bus-width = <8>; - no-1-8-v; - non-removable; - no-sd; - no-sdio; - status = "okay"; }; &iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - pinctrl_audmux: audmuxgrp { - fsl,pins = < - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0 - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 - >; - }; - - pinctrl_backlight: backlightgrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0 - >; - }; - - pinctrl_can1: can1grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 - /* CAN1_SR */ - MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008 - /* CAN1_TERM */ - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b088 - >; - }; - - pinctrl_can2: can2grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000 - MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008 - /* CAN2_SR */ - MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008 - >; - }; - - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - /* CS */ - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 - >; - }; - pinctrl_ecspi2: ecspi2grp { fsl,pins = < MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1 @@ -747,113 +310,12 @@ >; }; - pinctrl_hog: hoggrp { - fsl,pins = < - /* ITU656_nRESET */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 - /* CAM1_MIRROR */ - MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x130b0 - /* CAM2_MIRROR */ - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 - /* CAM_nDETECT */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 - /* ISB_IN1 */ - MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 - /* ISB_nIN2 */ - MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 - /* WARN_LIGHT */ - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x100b0 - /* ON2_FB */ - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 - /* YACO_nIRQ */ - MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 - /* YACO_BOOT0 */ - MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0 - /* YACO_nRESET */ - MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 - /* FORCE_ON1 */ - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 - /* AUDIO_nRESET */ - MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0 - /* ITU656_nPDN */ - MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 - - /* HW revision detect */ - /* REV_ID0 */ - MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 - /* REV_ID1 is shared with PWM3 */ - /* REV_ID2 */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 - /* REV_ID3 */ - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 - /* REV_ID4 */ - MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 - - /* New in HW revision 1 */ - /* ON1_FB */ - MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0 - /* DIP1_FB */ - MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 - MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; - - pinctrl_ipu1_csi0: ipu1csi0grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 - MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 - MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 - MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 - MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 - MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 - MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 - MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 - MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 - >; - }; - pinctrl_keypad: keypadgrp { fsl,pins = < MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 >; }; - pinctrl_leds: ledsgrp { - fsl,pins = < - /* DEBUG0 */ - MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b0 - /* DEBUG1 */ - MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0 - /* POWER_LED */ - MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0 - >; - }; - - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0 - >; - }; - - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0 - >; - }; - pinctrl_rotary_ch: rotarychgrp { fsl,pins = < MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 @@ -867,77 +329,4 @@ MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0 >; }; - - /* YaCO AUX Uart */ - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; - - /* YaCO Touchscreen UART */ - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 - /* power enable, high active */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 - MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 - MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 - >; - }; }; diff --git a/arch/arm/boot/dts/imx6dl-vicut1.dts b/arch/arm/boot/dts/imx6dl-vicut1.dts index 174fd913bf96..5035d303447d 100644 --- a/arch/arm/boot/dts/imx6dl-vicut1.dts +++ b/arch/arm/boot/dts/imx6dl-vicut1.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-vicut1.dtsi" +#include "imx6qdl-vicut1-12inch.dtsi" / { model = "Kverneland UT1 Board"; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index 6330d75f8f39..f266f1b7e0cf 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -142,7 +142,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: n25q032@0 { + flash: flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6q-bosch-acc.dts b/arch/arm/boot/dts/imx6q-bosch-acc.dts new file mode 100644 index 000000000000..8768222e183e --- /dev/null +++ b/arch/arm/boot/dts/imx6q-bosch-acc.dts @@ -0,0 +1,779 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Support for the i.MX6-based Bosch ACC board. + * + * Copyright (C) 2016 Garz & Fricke GmbH + * Copyright (C) 2018 DENX Software Engineering GmbH, Heiko Schocher <hs@denx.de> + * Copyright (C) 2018 DENX Software Engineering GmbH, Niel Fourie <lusus@denx.de> + * Copyright (C) 2019-2021 Bosch Thermotechnik GmbH, Matthias Winker <matthias.winker@bosch.com> + * Copyright (C) 2022 DENX Software Engineering GmbH, Philip Oberfichtner <pro@denx.de> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "imx6q.dtsi" + +/ { + model = "Bosch ACC"; + compatible = "bosch,imx6q-acc", "fsl,imx6q"; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + mmc0 = &usdhc4; + mmc1 = &usdhc2; + serial0 = &uart2; + serial1 = &uart1; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; + + backlight_lvds: backlight-lvds { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 200000>; + brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>; + num-interpolated-steps = <10>; + default-brightness-level = <60>; + power-supply = <®_lcd>; + }; + + panel { + compatible = "dataimage,fg1001l0dsswmg01"; + backlight = <&backlight_lvds>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + refclk: refclk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&clks IMX6QDL_CLK_CKO2>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "12mhz_refclk"; + assigned-clocks = <&clks IMX6QDL_CLK_CKO>, + <&clks IMX6QDL_CLK_CKO2>, + <&clks IMX6QDL_CLK_CKO2_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_CKO2>, + <&clks IMX6QDL_CLK_CKO2_PODF>, + <&clks IMX6QDL_CLK_OSC>; + assigned-clock-rates = <0>, <12000000>, <0>; + }; + + cpus { + cpu0: cpu@0 { + operating-points = < + /* kHz uV */ + 1200000 1275000 + 996000 1225000 + 852000 1225000 + 792000 1150000 + 396000 950000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1225000 + 996000 1175000 + 852000 1175000 + 792000 1150000 + 396000 1150000 + >; + }; + + cpu1: cpu@1 { + operating-points = < + /* kHz uV */ + 1200000 1275000 + 996000 1225000 + 852000 1225000 + 792000 1150000 + 396000 950000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1225000 + 996000 1175000 + 852000 1175000 + 792000 1150000 + 396000 1150000 + >; + }; + }; + + pwm-leds { + compatible = "pwm-leds"; + + led_red: led-0 { + color = <LED_COLOR_ID_RED>; + max-brightness = <248>; + default-state = "off"; + pwms = <&pwm2 0 500000>; + }; + + led_white: led-1 { + color = <LED_COLOR_ID_WHITE>; + max-brightness = <248>; + default-state = "off"; + pwms = <&pwm3 0 500000>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_gpio_led>; + + led-2 { + color = <LED_COLOR_ID_RED>; + gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + reg_5p0: regulator-5p0 { + compatible = "regulator-fixed"; + regulator-name = "5p0"; + }; + + reg_vin: regulator-vin { + compatible = "regulator-fixed"; + regulator-name = "VIN"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <4500000>; + regulator-always-on; + vin-supply = <®_5p0>; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_5p0>; + }; + + reg_usb_h2_vbus: regulator-usb-h2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_5p0> ; + regulator-always-on; + }; + + reg_vsnvs: regulator-vsnvs { + compatible = "regulator-fixed"; + regulator-name = "VSNVS_3V0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + vin-supply = <®_5p0>; + }; + + reg_lcd: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "LCD0 POWER"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_enable>; + gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + reg_dac: regulator-dac { + compatible = "regulator-fixed"; + regulator-name = "vref_dac"; + regulator-min-microvolt = <20000>; + regulator-max-microvolt = <20000>; + vin-supply = <®_5p0> ; + regulator-boot-on; + }; + + reg_sw4: regulator-sw4 { + compatible = "regulator-fixed"; + regulator-name = "SW4_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_5p0>; + }; + + reg_sys: regulator-sys { + compatible = "regulator-fixed"; + regulator-name = "SYS_4V2"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + vin-supply = <®_5p0>; + }; +}; + +®_arm { + vin-supply = <&sw2_reg>; +}; + +®_soc { + vin-supply = <&sw1c_reg>; +}; + +®_vdd1p1 { + vin-supply = <®_vsnvs>; +}; + +®_vdd2p5 { + vin-supply = <®_vsnvs>; +}; + +®_vdd3p0 { + vin-supply = <®_vsnvs>; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET_REF>; + clock-names = "ipg", "ahb", "ptp", "enet_out"; + phy-mode = "rmii"; + phy-supply = <®_sw4>; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + smsc,disable-energy-detect; + }; + }; +}; + +&gpu_vg { + status = "disabled"; +}; + +&gpu_2d { + status = "disabled"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <400000>; + status = "okay"; + + pmic: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1c_reg: sw1c { + regulator-name = "VDD_SOC (sw1abc)"; + regulator-min-microvolt = <1275000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-name = "VDD_ARM (sw2)"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw3a_reg: sw3a { + compatible = "regulator-fixed"; + regulator-name = "DDR_1V5a"; + regulator-boot-on; + regulator-always-on; + + }; + + sw3b_reg: sw3b { + compatible = "regulator-fixed"; + regulator-name = "DDR_1V5b"; + regulator-boot-on; + regulator-always-on; + + }; + + sw4_reg: sw4 { + regulator-name = "AUX 3V15 (sw4)"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-boot-on; + regulator-always-on; + status = "disabled"; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + lm75: sensor@49 { + compatible = "national,lm75b"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lm75>; + reg = <0x49>; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; + + rtc: rtc@51 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + eeprom_ext: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <400000>; + status = "okay"; + + usb3503: usb@8 { + compatible = "smsc,usb3503"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3503>; + reg = <0x08>; + connect-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* Old: 0, SS: HIGH */ + intn-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; /* Old: 1, SS: HIGH */ + reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; /* Old: 0, SS: HIGH */ + initial-mode = <1>; + clocks = <&refclk>; + clock-names = "refclk"; + refclk-frequency = <12000000>; + }; + + exc3000: touchscreen@2a { + compatible = "eeti,exc3000"; + reg = <0x2a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctouch>; + interrupt-parent = <&gpio4>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + }; + + vcnl4035: light-sensor@60 { + compatible = "vishay,vcnl4035"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_proximity>; + reg = <0x60>; + }; +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pwm1 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + rts-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + linux,rs485-enabled-at-boot-time; + rs485-rx-during-tx; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbh2 { + pinctrl-names = "idle", "active"; + pinctrl-0 = <&pinctrl_usbh2_idle>; + pinctrl-1 = <&pinctrl_usbh2_active>; + vbus-supply = <®_usb_h2_vbus>; + status = "okay"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + vbus-supply = <®_usb_otg_vbus>; + disable-over-current; + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbphynop1 { + clocks = <&clks IMX6QDL_CLK_USBPHY1>; + clock-names = "main_clk"; + vcc-supply = <®_usb_h1_vbus>; +}; + +&usbphynop2 { + vcc-supply = <®_usb_h2_vbus>; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + enable-sdio-wakeup; + voltage-ranges = <3300 3300>; + vmmc-supply = <®_sw4>; + fsl,wp-controller; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + voltage-ranges = <3300 3300>; + vmmc-supply = <®_sw4>; + fsl,wp-controller; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + fsl,ext-reset-output; + timeout-sec=<10>; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0 /* FEC INT */ + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x0001b098 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x0001b098 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x0001b098 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; + + pinctrl_reset_gpio_led: reset-gpio-led-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b810 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b810 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_lcd_enable: lcdenablegrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 /* lcd enable */ + MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0 /* sel6_8 */ + >; + }; + + pinctrl_lm75: lm75grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + >; + }; + + pinctrl_proximity: proximitygrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x0001b0b0 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x0001b0b0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x0001b0b0 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x0001b0b0 + >; + }; + + pinctrl_rtc: rtc-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0 /* RTC INT */ + >; + }; + + pinctrl_ctouch: ctouch-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* CTOUCH_INT */ + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x0001b0b0 /* CTOUCH_RESET */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x0001b0b0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbh2_idle: usbh2-idle-grp { + fsl,pins = < + MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x00013018 + MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00013018 + >; + }; + + pinctrl_usbh2_active: usbh2-active-grp { + fsl,pins = < + MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x00013018 + MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00017018 + >; + }; + + pinctrl_usb3503: usb3503-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x00000018 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 /* USB INT */ + MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x0001b0b0 /* USB Reset */ + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 /* USB Connect */ + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x00017069 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x00010038 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017069 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017069 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017069 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017069 + MX6QDL_PAD_GPIO_4__SD2_CD_B 0x0001b0b0 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x00017059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x00010059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x00017059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x00017059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x00017059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x00017059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x00017059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x00017059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x00017059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x00017059 + >; + }; + + pinctrl_wdog1: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index 10922375c51e..ead83091e193 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -160,7 +160,7 @@ pinctrl-0 = <&pinctrl_ecspi5>; status = "okay"; - m25_eeprom: m25p80@0 { + m25_eeprom: flash@0 { compatible = "atmel,at25"; spi-max-frequency = <10000000>; size = <0x8000>; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index bfb530f29d9d..1ad41c944b4b 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -260,7 +260,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index c713ac03b3b9..9591848cbd37 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -102,7 +102,7 @@ cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "m25p80", "jedec,spi-nor"; spi-max-frequency = <40000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6q-dms-ba16.dts b/arch/arm/boot/dts/imx6q-dms-ba16.dts index 48fb47e715f6..137db38f0d27 100644 --- a/arch/arm/boot/dts/imx6q-dms-ba16.dts +++ b/arch/arm/boot/dts/imx6q-dms-ba16.dts @@ -47,7 +47,7 @@ pinctrl-0 = <&pinctrl_ecspi5>; status = "okay"; - m25_eeprom: m25p80@0 { + m25_eeprom: flash@0 { compatible = "atmel,at25256B", "atmel,at25"; spi-max-frequency = <20000000>; size = <0x8000>; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 4cde45d5c90c..e894faba571f 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -137,7 +137,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,w25q256", "jedec,spi-nor"; spi-max-frequency = <30000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts index 05ee28388229..cc1801002394 100644 --- a/arch/arm/boot/dts/imx6q-marsboard.dts +++ b/arch/arm/boot/dts/imx6q-marsboard.dts @@ -100,7 +100,7 @@ cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; status = "okay"; - m25p80@0 { + flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts index 1767e1a3cd53..271f4b2d9b9f 100644 --- a/arch/arm/boot/dts/imx6q-rex-pro.dts +++ b/arch/arm/boot/dts/imx6q-rex-pro.dts @@ -19,7 +19,7 @@ }; &ecspi3 { - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,sst25vf032b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6q-vicut1.dts b/arch/arm/boot/dts/imx6q-vicut1.dts index 0a4e251be162..dd91aff3f9e2 100644 --- a/arch/arm/boot/dts/imx6q-vicut1.dts +++ b/arch/arm/boot/dts/imx6q-vicut1.dts @@ -6,12 +6,9 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-vicut1.dtsi" +#include "imx6qdl-vicut1-12inch.dtsi" / { model = "Kverneland UT1Q Board"; compatible = "kvg,vicut1q", "fsl,imx6q"; }; - -&sata { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index ed2739e39085..bd763bae596b 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -286,6 +286,8 @@ codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_module_3v3_audio>; VDDIO-supply = <®_module_3v3>; @@ -517,8 +519,6 @@ MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 >; }; @@ -811,6 +811,12 @@ >; }; + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index e21f6ac864e5..baa197c90060 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -96,7 +96,7 @@ pinctrl-0 = <&pinctrl_ecspi4>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q128a11", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index 563bf9d44fe0..6b64b2fc3995 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -131,7 +131,7 @@ pinctrl-0 = <&pinctrl_ecspi4>; status = "okay"; - flash: m25p80@1 { + flash: flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q128a11", "jedec,spi-nor"; @@ -154,112 +154,112 @@ regulators { bcore1 { regulator-name = "bcore1"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; bcore2 { regulator-name = "bcore2"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; bpro { regulator-name = "bpro"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; bperi { regulator-name = "bperi"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; bmem { regulator-name = "bmem"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; ldo2 { regulator-name = "ldo2"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <1800000>; }; ldo3 { regulator-name = "ldo3"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; ldo4 { regulator-name = "ldo4"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; ldo5 { regulator-name = "ldo5"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; ldo6 { regulator-name = "ldo6"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; ldo7 { regulator-name = "ldo7"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; ldo8 { regulator-name = "ldo8"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; ldo9 { regulator-name = "ldo9"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; ldo10 { regulator-name = "ldo10"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; ldo11 { regulator-name = "ldo11"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; bio { regulator-name = "bio"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi b/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi deleted file mode 100644 index 7672fbfc29be..000000000000 --- a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/* - * Copyright 2020 Toradex - */ - -&iomuxc { - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1 - >; - }; - - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1 - >; - }; -}; - -/* Colibri MMC */ -&usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>; - vmmc-supply = <®_module_3v3>; - vqmmc-supply = <&vgen3_reg>; - wakeup-source; - keep-power-in-suspend; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; -}; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 4e2a309c93fa..c383e0e4110c 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2020 Toradex + * Copyright 2014-2022 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ @@ -13,13 +13,79 @@ backlight: backlight { compatible = "pwm-backlight"; + brightness-levels = <0 127 191 223 239 247 251 255>; + default-brightness-level = <1>; + enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_bl_on>; + power-supply = <®_module_3v3>; pwms = <&pwm3 0 5000000>; - enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */ status = "disabled"; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + wakeup { + debounce-interval = <10>; + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ + label = "Wake-Up"; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + lcd_display: disp0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + /* Will be filled by the bootloader */ + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0>; + }; + + panel_dpi: panel-dpi { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu"; + backlight = <&backlight>; + status = "disabled"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; regulator-name = "+V3.3"; @@ -38,36 +104,36 @@ reg_usb_host_vbus: regulator-usb-host-vbus { compatible = "regulator-fixed"; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; - regulator-name = "usb_host_vbus"; - regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */ + regulator-min-microvolt = <5000000>; + regulator-name = "usb_host_vbus"; status = "disabled"; }; sound { compatible = "fsl,imx-audio-sgtl5000"; - model = "imx6dl-colibri-sgtl5000"; - ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = "Headphone Jack", "HP_OUT", "LINE_IN", "Line In Jack", "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias"; + model = "imx6dl-colibri-sgtl5000"; mux-int-port = <1>; mux-ext-port = <5>; + ssi-controller = <&ssi1>; }; /* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */ sound_spdif: sound-spdif { compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; spdif-controller = <&spdif>; spdif-in; spdif-out; + model = "imx-spdif"; status = "disabled"; }; }; @@ -92,6 +158,10 @@ status = "disabled"; }; +&clks { + fsl,pmic-stby-poweroff; +}; + /* Colibri SSP */ &ecspi4 { cs-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; @@ -101,10 +171,10 @@ }; &fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; phy-handle = <ðphy>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; status = "okay"; mdio { @@ -118,6 +188,224 @@ }; }; +&gpio1 { + gpio-line-names = "", + "SODIMM_67", + "SODIMM_180", + "SODIMM_196", + "SODIMM_174", + "SODIMM_176", + "SODIMM_194", + "SODIMM_55", + "SODIMM_63", + "SODIMM_28", + "SODIMM_93", + "SODIMM_69", + "SODIMM_99", + "SODIMM_130", + "SODIMM_106", + "SODIMM_98", + "SODIMM_192", + "SODIMM_49", + "SODIMM_190", + "SODIMM_51", + "SODIMM_47", + "SODIMM_53", + "", + "SODIMM_22"; +}; + +&gpio2 { + gpio-line-names = "SODIMM_132", + "SODIMM_134", + "SODIMM_135", + "SODIMM_133", + "SODIMM_102", + "SODIMM_43", + "SODIMM_127", + "SODIMM_37", + "SODIMM_104", + "SODIMM_59", + "SODIMM_30", + "SODIMM_100", + "SODIMM_38", + "SODIMM_34", + "SODIMM_32", + "SODIMM_36", + "SODIMM_59", + "SODIMM_67", + "SODIMM_97", + "SODIMM_79", + "SODIMM_103", + "SODIMM_101", + "SODIMM_45", + "SODIMM_105", + "SODIMM_107", + "SODIMM_91", + "SODIMM_89", + "SODIMM_150", + "SODIMM_126", + "SODIMM_128", + "", + "SODIMM_94"; +}; + +&gpio3 { + gpio-line-names = "SODIMM_111", + "SODIMM_113", + "SODIMM_115", + "SODIMM_117", + "SODIMM_119", + "SODIMM_121", + "SODIMM_123", + "SODIMM_125", + "SODIMM_110", + "SODIMM_112", + "SODIMM_114", + "SODIMM_116", + "SODIMM_118", + "SODIMM_120", + "SODIMM_122", + "SODIMM_124", + "", + "SODIMM_96", + "SODIMM_77", + "SODIMM_25", + "SODIMM_27", + "SODIMM_88", + "SODIMM_90", + "SODIMM_31", + "SODIMM_23", + "SODIMM_29", + "SODIMM_71", + "SODIMM_73", + "SODIMM_92", + "SODIMM_81", + "SODIMM_131", + "SODIMM_129"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "SODIMM_168", + "", + "", + "", + "", + "SODIMM_184", + "SODIMM_186", + "HDMI_15", + "HDMI_16", + "SODIMM_178", + "SODIMM_188", + "SODIMM_56", + "SODIMM_44", + "SODIMM_68", + "SODIMM_82", + "SODIMM_24", + "SODIMM_76", + "SODIMM_70", + "SODIMM_60", + "SODIMM_58", + "SODIMM_78", + "SODIMM_72", + "SODIMM_80", + "SODIMM_46", + "SODIMM_62", + "SODIMM_48", + "SODIMM_74"; +}; + +&gpio5 { + gpio-line-names = "SODIMM_95", + "", + "SODIMM_86", + "", + "SODIMM_65", + "SODIMM_50", + "SODIMM_52", + "SODIMM_54", + "SODIMM_66", + "SODIMM_64", + "SODIMM_57", + "SODIMM_61", + "SODIMM_136", + "SODIMM_138", + "SODIMM_140", + "SODIMM_142", + "SODIMM_144", + "SODIMM_146", + "SODIMM_172", + "SODIMM_170", + "SODIMM_149", + "SODIMM_151", + "SODIMM_153", + "SODIMM_155", + "SODIMM_157", + "SODIMM_159", + "SODIMM_161", + "SODIMM_163", + "SODIMM_33", + "SODIMM_35", + "SODIMM_165", + "SODIMM_167"; +}; + +&gpio6 { + gpio-line-names = "SODIMM_169", + "SODIMM_171", + "SODIMM_173", + "SODIMM_175", + "SODIMM_177", + "SODIMM_179", + "SODIMM_85", + "SODIMM_166", + "SODIMM_160", + "SODIMM_162", + "SODIMM_158", + "SODIMM_164", + "", + "", + "SODIMM_156", + "SODIMM_75", + "SODIMM_154", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_152"; +}; + +&gpio7 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_19", + "SODIMM_21", + "", + "SODIMM_137"; +}; + &hdmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hdmi_ddc>; @@ -132,65 +420,66 @@ clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; - pinctrl-0 = <&pinctrl_i2c2_gpio>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; scl-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio3 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - pmic: pfuze100@8 { + pmic: pmic@8 { compatible = "fsl,pfuze100"; + fsl,pmic-stby-poweroff; reg = <0x08>; regulators { sw1a_reg: sw1ab { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1875000>; + regulator-min-microvolt = <300000>; regulator-ramp-delay = <6250>; }; sw1c_reg: sw1c { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1875000>; + regulator-min-microvolt = <300000>; regulator-ramp-delay = <6250>; }; sw3a_reg: sw3a { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1975000>; + regulator-min-microvolt = <400000>; }; swbst_reg: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5150000>; + regulator-min-microvolt = <5000000>; }; snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <1000000>; }; vref_reg: vrefddr { - regulator-boot-on; regulator-always-on; + regulator-boot-on; }; /* vgen1: unused */ vgen2_reg: vgen2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1550000>; + regulator-min-microvolt = <800000>; }; /* @@ -198,57 +487,58 @@ * the i.MX 6 NVCC_SD1. */ vgen3_reg: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; vgen4_reg: vgen4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; }; vgen5_reg: vgen5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; vgen6_reg: vgen6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; }; }; codec: sgtl5000@a { compatible = "fsl,sgtl5000"; - reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; + lrclk-strength = <3>; + reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_module_3v3_audio>; VDDIO-supply = <®_module_3v3>; VDDD-supply = <&vgen4_reg>; - lrclk-strength = <3>; }; /* STMPE811 touch screen controller */ stmpe811@41 { compatible = "st,stmpe811"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_touch_int>; - reg = <0x41>; + blocks = <0x5>; interrupts = <20 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio6>; interrupt-controller; id = <0>; - blocks = <0x5>; irq-trigger = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + reg = <0x41>; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; /* 12-bit ADC */ @@ -258,7 +548,7 @@ /* ADC converstion time: 80 clocks */ st,sample-time = <4>; - stmpe_touchscreen { + stmpe_ts: stmpe_touchscreen { compatible = "st,stmpe-ts"; /* 8 sample average control */ st,ave-ctrl = <3>; @@ -273,9 +563,10 @@ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; + status = "disabled"; }; - stmpe_adc { + stmpe_adc: stmpe_adc { compatible = "st,stmpe-adc"; /* forbid to use ADC channels 3-0 (touch) */ st,norequest-mask = <0x0F>; @@ -294,6 +585,21 @@ scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; + + atmel_mxt_ts: touchscreen@4a { + compatible = "atmel,maxtouch"; + interrupt-parent = <&gpio2>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_atmel_conn>; + reg = <0x4a>; + reset-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; /* SODIMM 106 */ + status = "disabled"; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; }; /* Colibri PWM<B> */ @@ -338,27 +644,27 @@ /* Colibri UART_A */ &uart1 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; - fsl,dte-mode; uart-has-rtscts; status = "disabled"; }; /* Colibri UART_B */ &uart2 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2_dte>; - fsl,dte-mode; uart-has-rtscts; status = "disabled"; }; /* Colibri UART_C */ &uart3 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3_dte>; - fsl,dte-mode; status = "disabled"; }; @@ -370,24 +676,28 @@ /* Colibri MMC */ &usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ - disable-wp; - vqmmc-supply = <®_module_3v3>; bus-width = <4>; no-1-8-v; + disable-wp; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>; + pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_mmc_cd_sleep>; + vmmc-supply = <®_module_3v3>; + vqmmc-supply = <&vgen3_reg>; status = "disabled"; }; /* eMMC */ &usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - vqmmc-supply = <®_module_3v3>; bus-width = <8>; no-1-8-v; non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + vqmmc-supply = <®_module_3v3>; status = "okay"; }; @@ -405,14 +715,36 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh_oc_1>; + /* Atmel MXT touchsceen + Capacitive Touch Adapter */ + /* NOTE: This pin group conflicts with pin groups + * pinctrl_pwm1/pinctrl_pwm4. Don't use them simultaneously. + */ + pinctrl_atmel_adap: atmeladaptergrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0xb0b1 /* SODIMM 28 */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0xb0b1 /* SODIMM 30 */ + >; + }; + + /* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */ + /* NOTE: This pin group conflicts with pin groups pinctrl_weim_cs1 and + * pinctrl_weim_cs2. Don't use them simultaneously. + */ + pinctrl_atmel_conn: atmelconnectorgrp { + fsl,pins = < + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0xb0b1 /* SODIMM_107 */ + MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0xb0b1 /* SODIMM_106 */ + >; + }; + pinctrl_audmux: audmuxgrp { fsl,pins = < + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0 MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 >; }; @@ -423,28 +755,52 @@ >; }; + /* CSI pins used as GPIOs */ + pinctrl_csi_gpio_1: csigpio1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x1b0b0 + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b0b0 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x130b0 + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b0 + MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x1b0b0 + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0 + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b0 + MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x1b0b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 + MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0 + MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0 + >; + }; + + pinctrl_csi_gpio_2: csigpio2grp { + fsl,pins = < + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b0 + >; + }; + pinctrl_ecspi4: ecspi4grp { fsl,pins = < + /* SPI CS */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x000b1 MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 - /* SPI CS */ - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x000b1 >; }; pinctrl_enet: enetgrp { fsl,pins = < + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 - MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 - MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK ((1<<30) | 0x1b0b0) + MX6QDL_PAD_GPIO_16__ENET_REF_CLK ((1<<30) | 0x1b0b0) >; }; @@ -462,13 +818,32 @@ >; }; - pinctrl_gpio_bl_on: gpioblon { + pinctrl_gpio_1: gpio1grp { + fsl,pins = < + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + >; + }; + pinctrl_gpio_2: gpio2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + >; + }; + + pinctrl_gpio_bl_on: gpioblongrp { fsl,pins = < MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 >; }; - pinctrl_gpio_keys: gpiokeys { + pinctrl_gpio_keys: gpiokeysgrp { fsl,pins = < MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 >; @@ -483,15 +858,15 @@ pinctrl_i2c2: i2c2grp { fsl,pins = < - MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 >; }; - pinctrl_i2c2_gpio: i2c2grp { + pinctrl_i2c2_gpio: i2c2gpiogrp { fsl,pins = < - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1 MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x4001b8b1 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1 >; }; @@ -523,8 +898,8 @@ MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0xb0b1 MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0xb0b1 /* Disable PWM pins on camera interface */ - MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x40 MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x40 + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x40 >; }; @@ -555,19 +930,34 @@ >; }; - pinctrl_mic_gnd: gpiomicgnd { + pinctrl_lvds_transceiver: lvdstxgrp { + fsl,pins = < + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x03030 /* SODIMM 95 */ + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0b030 /* SODIMM 55 */ + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x03030 /* SODIMM 63 */ + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x03030 /* SODIMM 99 */ + >; + }; + + pinctrl_mic_gnd: micgndgrp { fsl,pins = < /* Controls Mic GND, PU or '1' pull Mic GND to GND */ MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0 >; }; - pinctrl_mmc_cd: gpiommccd { + pinctrl_mmc_cd: mmccdgrp { fsl,pins = < MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b1 >; }; + pinctrl_mmc_cd_sleep: mmccdslpgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x0 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 @@ -576,15 +966,15 @@ pinctrl_pwm2: pwm2grp { fsl,pins = < - MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x00040 + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 >; }; pinctrl_pwm3: pwm3grp { fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x00040 + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 >; }; @@ -601,13 +991,6 @@ >; }; - pinctrl_usbh_oc_1: usbhoc1grp { - fsl,pins = < - /* USBH_OC */ - MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0 - >; - }; - pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 @@ -650,9 +1033,9 @@ pinctrl_uart2_dte: uart2dtegrp { fsl,pins = < MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 >; }; @@ -667,20 +1050,27 @@ fsl,pins = < /* USBC_DET */ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 - /* USBC_DET_EN */ - MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x0f058 /* USBC_DET_OVERWRITE */ MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x0f058 + /* USBC_DET_EN */ + MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x0f058 >; }; - pinctrl_usbc_id_1: usbc_id-1 { + pinctrl_usbc_id_1: usbcid1grp { fsl,pins = < /* USBC_ID */ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 >; }; + pinctrl_usbh_oc_1: usbhoc1grp { + fsl,pins = < + /* USBH_OC */ + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 @@ -692,6 +1082,40 @@ >; }; + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1 + >; + }; + + /* avoid backfeeding with removed card power */ + pinctrl_usdhc1_sleep: usdhc1sleepgrp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x3000 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x3000 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x3000 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x3000 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x3000 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x3000 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -730,135 +1154,136 @@ >; }; - pinctrl_weim_sram: weimsramgrp { - fsl,pins = < - MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 - MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 - /* Data */ - MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0 - MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0 - MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0 - MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0 - MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0 - MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0 - MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0 - MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0 - MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0 - MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0 - MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0 - MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0 - MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0 - MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0 - MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0 - MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0 - /* Address */ - MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 - MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 - MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 - MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 - MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 - MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 - MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 - MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 - MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 - MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 - MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 - MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 - MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 - MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 - MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 - MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 - >; - }; - - pinctrl_weim_rdnwr: weimrdnwr { - fsl,pins = < - MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x0040 - MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x130b0 - >; - }; - - pinctrl_weim_npwe: weimnpwe { - fsl,pins = < - MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x0040 - MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x130b0 - >; - }; - /* ADDRESS[16:18] [25] used as GPIO */ - pinctrl_weim_gpio_1: weimgpio-1 { + pinctrl_weim_gpio_1: weimgpio1grp { fsl,pins = < - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 - MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 >; }; /* ADDRESS[19:24] used as GPIO */ - pinctrl_weim_gpio_2: weimgpio-2 { + pinctrl_weim_gpio_2: weimgpio2grp { fsl,pins = < - MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 - MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 - MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 - MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 - MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 - MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 >; }; /* DATA[16:31] used as GPIO */ - pinctrl_weim_gpio_3: weimgpio-3 { + pinctrl_weim_gpio_3: weimgpio3grp { fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 - MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 - MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 - MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 - MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 - MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0 - MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0 >; }; /* DQM[0:3] used as GPIO */ - pinctrl_weim_gpio_4: weimgpio-4 { + pinctrl_weim_gpio_4: weimgpio4grp { fsl,pins = < MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 - MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0 >; }; /* RDY used as GPIO */ - pinctrl_weim_gpio_5: weimgpio-5 { + pinctrl_weim_gpio_5: weimgpio5grp { fsl,pins = < MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b0 >; }; /* ADDRESS[16] DATA[30] used as GPIO */ - pinctrl_weim_gpio_6: weimgpio-6 { + pinctrl_weim_gpio_6: weimgpio6grp { fsl,pins = < - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; + + pinctrl_weim_npwe: weimnpwegrp { + fsl,pins = < + MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x130b0 + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x0040 + >; + }; + + pinctrl_weim_sram: weimsramgrp { + fsl,pins = < + /* Data */ + MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0 + MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0 + MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0 + /* Address */ + MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 + MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 + MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 + MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 + MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 + MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 + MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 + MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 + MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 + MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 + MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 + MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 + MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 + MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 + MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 + MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 + /* Ctrl */ + MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 + MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 + >; + }; + + pinctrl_weim_rdnwr: weimrdnwrgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x130b0 + MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x0040 >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi index 648f5fcb72e6..2c1d6f28e695 100644 --- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi @@ -35,7 +35,7 @@ pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "sst,sst25vf040b", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index b167b33bd108..095c9143d99a 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -258,7 +258,7 @@ status = "okay"; /* default boot source: workaround #1 for errata ERR006282 */ - smarc_flash: spi-flash@0 { + smarc_flash: flash@0 { compatible = "winbond,w25q16dw", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index ac34709e9741..0ad4cb4f1e82 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -179,7 +179,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index c96f4d7e1e0d..beaa2dcd436c 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -321,7 +321,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index 92d09a3ebe0e..ee7e2371f94b 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -252,7 +252,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 49da30d7510c..904d5d051d63 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -237,7 +237,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 1f2ba6f6254e..768bc0e3a2b3 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -47,12 +47,12 @@ pinctrl-0 = <&pinctrl_leds>; compatible = "gpio-leds"; - green { + led_green: green { label = "phyflex:green"; gpios = <&gpio1 30 0>; }; - red { + led_red: red { label = "phyflex:red"; gpios = <&gpio2 31 0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 5e58740d40c5..1368a4762037 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -272,7 +272,7 @@ pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; status = "disabled"; /* pin conflict with WEIM NOR */ - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index eb9a0b104f1c..901b9a761b66 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -313,7 +313,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 0c0105468a2f..37482a9023fc 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -197,7 +197,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi index f86efd0ccc40..ce543e325cd3 100644 --- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi @@ -83,6 +83,16 @@ qca,clk-out-frequency = <125000000>; qca,smarteee-tw-us-1g = <24>; }; + + /* + * ADIN1300 (som rev 1.9 or later) is always at address 1. It + * will be enabled automatically by U-Boot if detected. + */ + ethernet-phy@1 { + reg = <1>; + adi,phy-output-clock = "125mhz-free-running"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index bcc5bbcce769..f41f86a76ea9 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -264,11 +264,6 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet &pinctrl_enet_mdio &pinctrl_etnphy_rst>; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET_REF>, - <&clks IMX6QDL_CLK_ENET_REF>; - clock-names = "ipg", "ahb", "ptp", "enet_out"; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; phy-reset-post-delay = <10>; diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index ccfa8e320be6..93a8123da27d 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -295,7 +295,7 @@ pinctrl-0 = <&pinctrl_usbh>; vbus-supply = <®_usb_h1_vbus>; clocks = <&clks IMX6QDL_CLK_CKO>; - status = "okay"; + status = "disabled"; }; &usbotg { diff --git a/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi new file mode 100644 index 000000000000..f505f2704530 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2021 Protonic Holland + */ + +/ { + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + autorepeat; + + power { + label = "Power Button"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + panel { + compatible = "kyo,tcg121xglp"; + backlight = <&backlight_lcd>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-handle = <&rgmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ9031RNX PHY */ + rgmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", + "CAM2_MIRROR", "", "", "SMBALERT", + "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", + "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", + "SD1_DATA3", "ETH_MDIO", "", + "", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC"; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", + "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", + "CAN2_SR", "CAN2_TX", "CAN2_RX", + "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL", + "HITCH_IN_OUT", + "LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "", + "ISB_LED"; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", + "I2S_BITCLK", "I2S_DOUT", + "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", + "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; +}; + +&gpio6 { + gpio-line-names = + "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", + "ITU656_D6", "ITU656_D7", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2", + "RGMII_TD3", + "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1", + "RGMII_RD2", "RGMII_RD3", "", ""; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 + >; + }; + + pinctrl_gpiokeys: gpiokeygrp { + fsl,pins = < + /* nON_SWITCH */ + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi index 1ac7e13249d2..a1676b5d2980 100644 --- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi @@ -16,18 +16,27 @@ stdout-path = &uart4; }; - backlight: backlight { + backlight_lcd: backlight { compatible = "pwm-backlight"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_backlight>; pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 16 64 255>; num-interpolated-steps = <16>; - default-brightness-level = <1>; + default-brightness-level = <48>; power-supply = <®_3v3>; enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; }; + backlight_led: backlight_led { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 5000000 0>; + brightness-levels = <0 16 64 255>; + num-interpolated-steps = <16>; + default-brightness-level = <48>; + power-supply = <®_3v3>; + }; + connector { compatible = "composite-video-connector"; label = "Composite0"; @@ -61,54 +70,37 @@ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; }; - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - - power { - label = "Power Button"; - gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - wakeup-source; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_leds>; led-0 { - label = "LED_DI0_DEBUG_0"; + label = "debug0"; function = LED_FUNCTION_HEARTBEAT; - gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; led-1 { - label = "LED_DI0_DEBUG_1"; + label = "debug1"; function = LED_FUNCTION_DISK; - gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "disk-activity"; }; led-2 { - label = "POWER_LED"; + label = "power_led"; function = LED_FUNCTION_POWER; gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - }; - - panel { - compatible = "kyo,tcg121xglp"; - backlight = <&backlight>; - power-supply = <®_3v3>; - port { - panel_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; + led-3 { + label = "isb_led"; + function = LED_FUNCTION_POWER; + gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; @@ -135,18 +127,6 @@ enable-active-high; }; - reg_wifi: regulator-wifi { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wifi_npd>; - regulator-name = "wifi"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; - enable-active-high; - startup-delay-us = <70000>; - }; - sound { compatible = "simple-audio-card"; simple-audio-card,name = "prti6q-sgtl5000"; @@ -173,6 +153,14 @@ frame-master; }; }; + + thermal-zones { + chassis-thermal { + polling-delay = <20000>; + polling-delay-passive = <0>; + thermal-sensors = <&tsens0>; + }; + }; }; &audmux { @@ -232,47 +220,13 @@ }; }; -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii-id"; - phy-handle = <&rgmii_phy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - /* Microchip KSZ9031RNX PHY */ - rgmii_phy: ethernet-phy@0 { - reg = <0>; - interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <300>; - }; - }; -}; - -&gpio1 { - gpio-line-names = - "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", - "CAM2_MIRROR", "", "", "SMBALERT", - "DEBUG_0", "DEBUG_1", "SDIO_SCK", "SDIO_CMD", "SDIO_D3", - "SDIO_D2", "SDIO_D1", "SDIO_D0", - "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", - "SD1_DATA3", "", "", - "", "ETH_RESET", "WIFI_PD", "WIFI_BT_RST", "ETH_INT", "", - "WL_IRQ", "ETH_MDC"; -}; - &gpio2 { gpio-line-names = - "count0", "count1", "count2", "", "", "", "", "", - "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4", - "BOARD_ID0", "BOARD_ID1", "BOARD_ID2", - "", "", "", "", "", "", "", "ON_SWITCH", - "POWER_LED", "", "ECSPI2_SS0", "", "", "", "", ""; + "YACO_WHEEL", "YACO_RADAR", "YACO_PTO", "", "", "", "", "", + "", "LED_PWM", "", "", "", + "", "", "", + "", "", "", "", "", "ISB_IN2", "ISB_nIN1", "ON_SWITCH", + "POWER_LED", "", "", "", "", "", "", ""; }; &gpio3 { @@ -281,37 +235,8 @@ "", "", "", "", "", "", "", "", "ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1", "CPU_ON1_FB", "USB_OTG_OC", "USB_OTG_PWR", "YACO_IRQ", - "", "", "", "", "", "", "", ""; -}; - -&gpio4 { - gpio-line-names = - "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", - "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", - "CAN2_SR", "CAN2_TX", "CAN2_RX", - "LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "", "", "", "", "", "", - "", "", "", "", "BL_EN", "BL_PWM", "", ""; -}; - -&gpio5 { - gpio-line-names = - "", "", "", "", "", "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_W_DIS", - "PCIE_RESET", "", "", "", "", "", "", "", - "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", - "I2S_BITCLK", "I2S_DOUT", - "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", - "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; -}; - -&gpio6 { - gpio-line-names = - "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", - "ITU656_D6", "ITU656_D7", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2", - "RGMII_TD3", - "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1", - "RGMII_RD2", "RGMII_RD3", "", ""; + "TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0", + "YACO_RESET"; }; &gpio7 { @@ -406,9 +331,10 @@ reg = <0x51>; }; - temperature-sensor@70 { + tsens0: temperature-sensor@70 { compatible = "ti,tmp103"; reg = <0x70>; + #thermal-sensor-cells = <0>; }; }; @@ -438,13 +364,15 @@ }; }; -&pcie { +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; -&pwm1 { +&pwm3 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1>; + pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; }; @@ -460,12 +388,6 @@ status = "okay"; }; -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; @@ -513,26 +435,6 @@ status = "okay"; }; -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - vmmc-supply = <®_wifi>; - non-removable; - cap-power-off-card; - keep-power-in-suspend; - no-1-8-v; - no-mmc; - no-sd; - status = "okay"; - - wifi { - compatible = "ti,wl1271"; - interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>; - ref-clock-frequency = "38400000"; - tcxo-clock-frequency = "19200000"; - }; -}; - &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; @@ -613,29 +515,6 @@ >; }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 - /* Phy reset */ - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 - >; - }; - pinctrl_hog: hoggrp { fsl,pins = < /* ITU656_nRESET */ @@ -646,8 +525,6 @@ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 /* CAM_nDETECT */ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 - /* nON_SWITCH */ - MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 /* ISB_IN1 */ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 /* ISB_nIN2 */ @@ -669,27 +546,11 @@ /* ITU656_nPDN */ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 - /* HW revision detect */ - /* REV_ID0 */ - MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 - /* REV_ID1 */ - MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 - /* REV_ID2 */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 - /* REV_ID3 */ - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 - /* REV_ID4 */ - MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 - /* New in HW revision 1 */ /* ON1_FB */ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0 /* DIP1_FB */ MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 - - /* New in UT2: FIXME: ISB PWM should start off, PD */ - /* ISB_LED_PWM */ - MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x130b0 >; }; @@ -729,6 +590,8 @@ MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0 /* POWER_LED */ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0 + /* ISB_LED */ + MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0 >; }; @@ -738,20 +601,17 @@ >; }; - /* YaCO AUX Uart */ - pinctrl_uart1: uart1grp { + pinctrl_pwm3: pwm3grp { fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0 >; }; - pinctrl_uart2: uart2grp { + /* YaCO AUX Uart */ + pinctrl_uart1: uart1grp { fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1 - MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; @@ -797,19 +657,6 @@ >; }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 - /* WL12xx IRQ */ - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x10880 - >; - }; - pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 @@ -825,10 +672,4 @@ MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 >; }; - - pinctrl_wifi_npd: wifinpdgrp { - fsl,pins = < - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b8b0 - >; - }; }; diff --git a/arch/arm/boot/dts/imx6qp-vicutp.dts b/arch/arm/boot/dts/imx6qp-vicutp.dts index 7bad7ca6b12e..49ff145fffe5 100644 --- a/arch/arm/boot/dts/imx6qp-vicutp.dts +++ b/arch/arm/boot/dts/imx6qp-vicutp.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "imx6qp.dtsi" #include "imx6qdl-vicut1.dtsi" +#include "imx6qdl-vicut1-12inch.dtsi" / { model = "Kverneland UT1P Board"; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 25f6f2fb1555..f16c830f1e91 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -137,7 +137,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index c7d907c5c352..06a515121dfc 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -50,7 +50,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0x0>; diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index 66af78e83b70..a2c79bcf9a11 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -107,7 +107,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index dce5dcf96c25..7dda42553f4b 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -123,7 +123,7 @@ pinctrl-0 = <&pinctrl_qspi2>; status = "okay"; - flash0: s25fl128s@0 { + flash0: flash@0 { reg = <0>; #address-cells = <1>; #size-cells = <1>; @@ -133,7 +133,7 @@ spi-tx-bus-width = <4>; }; - flash1: s25fl128s@2 { + flash1: flash@2 { reg = <2>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 99f4cf777a38..969cfe920d25 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -108,7 +108,7 @@ pinctrl-0 = <&pinctrl_qspi2>; status = "okay"; - flash0: n25q256a@0 { + flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; @@ -118,7 +118,7 @@ reg = <0>; }; - flash1: n25q256a@2 { + flash1: flash@2 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index a3fde3316c73..1a18c41ce385 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -286,7 +286,7 @@ pinctrl-0 = <&pinctrl_qspi>; status = "okay"; - flash0: n25q256a@0 { + flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi index 47d3ce5d255f..acd936540d89 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi @@ -19,7 +19,7 @@ }; &qspi { - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spi-nand"; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi index a095a7654ac6..29ed38dce580 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi @@ -18,7 +18,7 @@ }; &qspi { - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spi-nand"; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi index 770f59b23102..a6cf0f21c66d 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi @@ -178,7 +178,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi index 2a449a3c1ae2..09a83dbdf651 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi @@ -19,7 +19,7 @@ pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "mxicy,mx25v8035f", "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi index 7cda6944501d..ec042648bd98 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi @@ -11,7 +11,7 @@ brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <5>; power-supply = <®_backlight_en>; - pwms = <&pwm3 0 5000000>; + pwms = <&pwm3 0 5000000 0>; status = "disabled"; }; @@ -72,8 +72,8 @@ st,settling = <2>; st,fraction-z = <7>; st,i-drive = <1>; - touchscreen-inverted-x = <1>; - touchscreen-inverted-y = <1>; + touchscreen-inverted-x; + touchscreen-inverted-y; }; }; }; @@ -91,7 +91,6 @@ }; &pwm3 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi new file mode 100644 index 000000000000..eca94ed6451b --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi @@ -0,0 +1,211 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/* + * Common for + * - TQMa6ULx + * - TQMa6ULxL + * - TQMa6ULLx + * - TQMa6ULLxL + */ + +/ { + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_recovery>; + scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pfuze3000: pmic@8 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + reg_sw1a: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-ramp-delay = <6250>; + /* not used */ + }; + + reg_sw1b_core: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + reg_sw2: sw2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + reg_sw3_ddr: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_swbst: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + /* not used */ + }; + + reg_snvs_3v0: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vrefddr: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + reg_vccsd: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + }; + + reg_v33_3v3: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vldo1_3v3: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + /* not used */ + }; + + reg_vldo2: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + /* not used */ + }; + + reg_vldo3: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + /* not used */ + }; + + reg_vldo4: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; + + jc42_1a: eeprom-temperature-sensor@1a { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x1a>; + }; + + m24c64_50: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + m24c02_52: eeprom@52 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + read-only; + }; + + rtc0: rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + + /* + * PMIC & temperature sensor IRQ + * Both do currently not use IRQ + * potentially dangerous if used on baseboard + */ + pmic-int-hog { + gpio-hog; + gpios = <24 0>; + input; + }; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + flash0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <33000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + reg = <0>; + }; +}; + +/* eMMC */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz" , "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + + bus-width = <8>; + disable-wp; + non-removable; + no-sdio; + no-sd; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001b8b0 + MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c4_recovery: i2c4recoverygrp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x4001b8b0 + MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x4001b8b0 + >; + }; + + pinctrl_pmic: pmic { + fsl,pins = < + /* PMIC irq */ + MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x1b099 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts new file mode 100644 index 000000000000..f2a5f17f312e --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/dts-v1/; + +#include "imx6ul-tqma6ul1.dtsi" +#include "mba6ulx.dtsi" + +/ { + model = "TQ-Systems TQMa6UL1 SoM on MBa6ULx board"; + compatible = "tq,imx6ul-tqma6ul1-mba6ulx", "tq,imx6ul-tqma6ul1", "fsl,imx6ul"; +}; + +/* + * Note: can2 and fec2 are enabled on mba6ulx level (for i.MX6ULG2 usage) + * and need to be disabled here again + */ +&can2 { + status = "disabled"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_enet1_mdc>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + max-speed = <100>; + reg = <0>; + }; + }; +}; + +&fec2 { + /delete-property/ phy-handle; + /delete-node/ mdio; +}; + +&iomuxc { + pinctrl_enet1_mdc: enet1mdcgrp { + fsl,pins = < + /* mdio */ + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi new file mode 100644 index 000000000000..24192d012ef7 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6ul-tqma6ul2.dtsi" + +/ { + model = "TQ-Systems TQMa6UL1 SoM"; + compatible = "tq,imx6ul-tqma6ul1", "fsl,imx6ul"; +}; + +/* + * There are no module specific differences compared to TQMa6UL2, + * only external interfaces differ + */ + +/* + * Devices not available on i.MX6ULG1 and should not be enabled on + * mainboard level (again) + */ +&can2 { + status = "disabled"; +}; + +&csi { + status = "disabled"; +}; + +&fec2 { + status = "disabled"; +}; + +&lcdif { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts new file mode 100644 index 000000000000..0757df2b8f48 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/dts-v1/; + +#include "imx6ul-tqma6ul2.dtsi" +#include "mba6ulx.dtsi" + +/ { + model = "TQ-Systems TQMa6ULx SoM on MBa6ULx board"; + compatible = "tq,imx6ul-tqma6ul2-mba6ulx", "tq,imx6ul-tqma6ul2", "fsl,imx6ul"; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi new file mode 100644 index 000000000000..e2e95dd92263 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6ul.dtsi" +#include "imx6ul-tqma6ul-common.dtsi" +#include "imx6ul-tqma6ulx-common.dtsi" + +/ { + model = "TQ-Systems TQMa6UL2 SoM"; + compatible = "tq,imx6ul-tqma6ul2", "fsl,imx6ul"; +}; + +&usdhc2 { + fsl,tuning-step = <6>; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017051 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017051 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017051 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017051 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017051 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017051 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017051 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017051 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017051 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017051 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170e1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170e1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170e1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170e1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170e1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170e1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170e1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170e1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170e1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170e1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts new file mode 100644 index 000000000000..9d9b6b744a1c --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/dts-v1/; + +#include "imx6ul-tqma6ul2l.dtsi" +#include "mba6ulx.dtsi" + +/ { + model = "TQ Systems TQMa6UL2L SoM on MBa6ULx board"; + compatible = "tq,imx6ul-tqma6ul2l-mba6ulx", "tq,imx6ul-tqma6ul2l", "fsl,imx6ul"; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi new file mode 100644 index 000000000000..caf2c5d03f7e --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6ul.dtsi" +#include "imx6ul-tqma6ul-common.dtsi" +#include "imx6ul-tqma6ulxl-common.dtsi" + +/ { + model = "TQ-Systems TQMa6UL2L SoM"; + compatible = "tq,imx6ul-tqma6ul2l", "fsl,imx6ul"; +}; + +&usdhc2 { + fsl,tuning-step= <6>; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017051 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017051 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017051 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017051 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017051 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017051 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017051 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017051 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017051 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017051 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170e1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi new file mode 100644 index 000000000000..5afb9046c202 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/* + * Common for + * - TQMa6ULx + * - TQMa6ULLx + */ + +&m24c64_50 { + vcc-supply = <®_sw2>; +}; + +&m24c02_52 { + vcc-supply = <®_sw2>; +}; + +®_sw2 { + regulator-boot-on; + regulator-always-on; +}; + +/* eMMC */ +&usdhc2 { + vmmc-supply = <®_sw2>; + vqmmc-supply = <®_vldo4>; +}; + +&iomuxc { + pinctrl_qspi: qspigrp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70b9 + MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70b9 + MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70b9 + MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70b9 + MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70b9 + MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi new file mode 100644 index 000000000000..ba84a4f70ebd --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/* + * Common for + * - TQMa6ULxL + * - TQMa6ULLxL + */ + +/ { + reg_vin: reg-vin { + compatible = "regulator-fixed"; + regulator-name = "VIN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&m24c64_50 { + vcc-supply = <®_vin>; +}; + +&m24c02_52 { + vcc-supply = <®_vin>; +}; + +/* eMMC */ +&usdhc2 { + vmmc-supply = <®_vin>; + vqmmc-supply = <®_vldo4>; +}; + +&iomuxc { + pinctrl_qspi: qspigrp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a9 + MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a9 + MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a9 + MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a9 + MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a9 + MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-aster.dts new file mode 100644 index 000000000000..d3f2fb7c6c1e --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-aster.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2017-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-nonwifi.dtsi" +#include "imx6ull-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Aster"; + compatible = "toradex,colibri-imx6ull-aster", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi b/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi new file mode 100644 index 000000000000..c9133ba2d705 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2017-2022 Toradex + */ + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; +}; + +&adc1 { + status = "okay"; +}; + +&ecspi1 { + status = "okay"; + + num-cs = <2>; + cs-gpios = < + &gpio3 26 GPIO_ACTIVE_HIGH /* SODIMM 86 LCD_DATA21 */ + &gpio4 28 GPIO_ACTIVE_HIGH /* SODIMM 65 CSI_DATA07 */ + >; +}; + +/* + * Following SODIMM Pins should not be accessed as GPIO on Aster board: + * 134 - AIN5_SCL (no connection) + * 127 - Voltage Level Translator OE# signal (IC11 and IC12) + * + * To configure GPIO to LED5, please disable FEC2 and uncomment the following: + * &iomuxc { + * pinctrl-names = "default"; + * pinctrl-0 = < + * &pinctrl_gpio1 + * &pinctrl_gpio2 + * &pinctrl_gpio3 + * &pinctrl_gpio4 + * &pinctrl_gpio6 - for non-WiFi modules only + * &pinctrl_gpio7 + * &pinctrl_gpio_aster + * >; + * + * pinctrl_gpio_aster: gpio-aster { + * fsl,pins = < + * MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x1b0b0 + * >; + * }; + * }; + */ + +&i2c1 { + status = "okay"; + + m41t0m6: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +/* PWM <A> */ +&pwm4 { + status = "okay"; +}; + +/* PWM <B> */ +&pwm5 { + status = "okay"; +}; + +/* PWM <C> */ +&pwm6 { + status = "okay"; +}; + +/* PWM <D> */ +&pwm7 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +&usdhc1 { + vmmc-supply = <®_3v3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts new file mode 100644 index 000000000000..919c0464d6cb --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-emmc-nonwifi.dtsi" +#include "imx6ull-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Aster"; + compatible = "toradex,colibri-imx6ull-emmc-aster", + "toradex,colibri-imx6ull-emmc", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts new file mode 100644 index 000000000000..b9060c2f7977 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-emmc-nonwifi.dtsi" +#include "imx6ull-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 1G (eMMC) on Colibri Iris V2"; + compatible = "toradex,colibri-imx6ull-iris-v2", + "toradex,colibri-imx6ull-emmc", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts new file mode 100644 index 000000000000..0ab71f2f5daa --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-emmc-nonwifi.dtsi" +#include "imx6ull-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Iris"; + compatible = "toradex,colibri-imx6ull-emmc-iris", + "toradex,colibri-imx6ull-emmc", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi index a099abfdfa27..ea238525d5c0 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2021 Toradex + * Copyright 2022 Toradex */ #include "imx6ull-colibri.dtsi" @@ -8,7 +8,7 @@ / { aliases { mmc0 = &usdhc2; /* eMMC */ - mmc1 = &usdhc1; /* MMC 4bit slot */ + mmc1 = &usdhc1; /* MMC 4-bit slot */ }; memory@80000000 { @@ -154,6 +154,7 @@ "SODIMM_127"; }; +/* NAND */ &gpmi { status = "disabled"; }; @@ -170,6 +171,7 @@ pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>; }; +/* eMMC */ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2emmc>; diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts index 08669a18349e..9bf7111d7b00 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2018 Toradex AG + * Copyright 2018-2022 Toradex */ /dts-v1/; @@ -9,6 +9,6 @@ #include "imx6ull-colibri-eval-v3.dtsi" / { - model = "Toradex Colibri iMX6ULL 256MB on Colibri Evaluation Board V3"; + model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Evaluation Board V3"; compatible = "toradex,colibri-imx6ull-eval", "fsl,imx6ull"; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi index a78849fd2afa..e29907428c20 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2017 Toradex AG + * Copyright 2017-2022 Toradex */ / { @@ -8,20 +8,6 @@ stdout-path = "serial0:115200n8"; }; - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_snvs_gpiokeys>; - - power { - label = "Wake-Up"; - gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; - wakeup-source; - }; - }; - /* fixed crystal dedicated to mcp2515 */ clk16m: clk16m { compatible = "fixed-clock"; @@ -29,18 +15,6 @@ clock-frequency = <16000000>; }; - panel: panel { - compatible = "edt,et057090dhu"; - backlight = <&bl>; - power-supply = <®_3v3>; - - port { - panel_in: endpoint { - remote-endpoint = <&lcdif_out>; - }; - }; - }; - reg_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "3.3V"; @@ -71,14 +45,6 @@ status = "okay"; }; -&bl { - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - power-supply = <®_3v3>; - pwms = <&pwm4 0 5000000 1>; - status = "okay"; -}; - &ecspi1 { status = "okay"; @@ -107,16 +73,6 @@ }; }; -&lcdif { - status = "okay"; - - port { - lcdif_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; -}; - /* PWM <A> */ &pwm4 { status = "okay"; @@ -150,6 +106,7 @@ }; &usbotg1 { + vbus-supply = <®_usbh_vbus>; status = "okay"; }; @@ -159,20 +116,6 @@ }; &usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; - pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>; - pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_sleep_cd>; - cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; - disable-wp; - wakeup-source; - keep-power-in-suspend; vmmc-supply = <®_3v3>; - vqmmc-supply = <®_sd1_vmmc>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts new file mode 100644 index 000000000000..afc1e0119783 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-nonwifi.dtsi" +#include "imx6ull-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 256M/512B on Colibri Iris V2"; + compatible = "toradex,colibri-imx6ull-iris-v2", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; + +&gpio1 { + /* This turns the LVDS transceiver on */ + lvds-power-on { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */ + line-name = "LVDS_POWER_ON"; + output-high; + }; +}; + +&gpio2 { + /* + * This switches the LVDS transceiver to the single-channel + * output mode. + */ + lvds-ch-mode { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */ + line-name = "LVDS_CH_MODE"; + output-high; + }; + + /* + * This switches the LVDS transceiver to the 24-bit RGB mode. + */ + lvds-rgb-mode { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */ + line-name = "LVDS_RGB_MODE"; + output-low; + }; +}; + +&gpio5 { + /* + * This switches the LVDS transceiver to VESA color mapping mode. + */ + lvds-color-map { + gpio-hog; + gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */ + line-name = "LVDS_COLOR_MAP"; + output-low; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi new file mode 100644 index 000000000000..93649cad0cc0 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +#include "imx6ull-colibri-iris.dtsi" + +/ { + reg_3v3_vmmc: regulator-3v3-vmmc { + compatible = "regulator-fixed"; + regulator-name = "3v3_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + }; +}; + + +&usdhc1 { + cap-power-off-card; + vmmc-supply = <®_3v3_vmmc>; + /delete-property/ keep-power-in-suspend; + /delete-property/ no-1-8-v; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-iris.dts new file mode 100644 index 000000000000..4fb97b0fe30b --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-iris.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-nonwifi.dtsi" +#include "imx6ull-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Iris"; + compatible = "toradex,colibri-imx6ull-iris", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi new file mode 100644 index 000000000000..7f3b37baba88 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; +}; + +&adc1 { + status = "okay"; +}; + +&gpio1 { + /* + * uart25_tx_on turns the UART transceiver on. If one wants to turn the + * transceiver off, that property has to be deleted and the gpio handled + * in userspace. + * The same applies to uart1_tx_on. + */ + uart25_tx_on { + gpio-hog; + gpios = <15 0>; + output-high; + }; +}; + +&gpio2 { + uart1_tx_on { + gpio-hog; + gpios = <7 0>; + output-high; + }; +}; + +&i2c1 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + m41t0m6: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +/* PWM <A> */ +&pwm4 { + status = "okay"; +}; + +/* PWM <B> */ +&pwm5 { + status = "okay"; +}; + +/* PWM <C> */ +&pwm6 { + status = "okay"; +}; + +/* PWM <D> */ +&pwm7 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +&usdhc1 { + vmmc-supply = <®_3v3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi index 95a11b8bcbdb..88901db255d6 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2018 Toradex AG + * Copyright 2018-2022 Toradex */ #include "imx6ull-colibri.dtsi" @@ -12,13 +12,150 @@ }; }; +&gpio1 { + gpio-line-names = "SODIMM_8", + "SODIMM_6", + "SODIMM_129", + "SODIMM_89", + "SODIMM_19", + "SODIMM_21", + "UNUSABLE_SODIMM_180", + "UNUSABLE_SODIMM_184", + "SODIMM_4", + "SODIMM_2", + "SODIMM_106", + "SODIMM_71", + "SODIMM_23", + "SODIMM_31", + "SODIMM_99", + "SODIMM_102", + "SODIMM_33", + "SODIMM_35", + "SODIMM_25", + "SODIMM_27", + "SODIMM_36", + "SODIMM_38", + "SODIMM_32", + "SODIMM_34", + "SODIMM_135", + "SODIMM_77", + "SODIMM_100", + "SODIMM_186", + "SODIMM_196", + "SODIMM_194"; +}; + +&gpio2 { + gpio-line-names = "SODIMM_55", + "SODIMM_63", + "SODIMM_178", + "SODIMM_188", + "SODIMM_73", + "SODIMM_30", + "SODIMM_67", + "SODIMM_104", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_190", + "SODIMM_47", + "SODIMM_192", + "SODIMM_49", + "SODIMM_51", + "SODIMM_53"; +}; + +&gpio3 { + gpio-line-names = "SODIMM_56", + "SODIMM_44", + "SODIMM_68", + "SODIMM_82", + "", + "SODIMM_76", + "SODIMM_70", + "SODIMM_60", + "SODIMM_58", + "SODIMM_78", + "SODIMM_72", + "SODIMM_80", + "SODIMM_46", + "SODIMM_62", + "SODIMM_48", + "SODIMM_74", + "SODIMM_50", + "SODIMM_52", + "SODIMM_54", + "SODIMM_66", + "SODIMM_64", + "SODIMM_57", + "SODIMM_61", + "SODIMM_29", + "SODIMM_37", + "SODIMM_88", + "SODIMM_86", + "SODIMM_92", + "SODIMM_90"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_59", + "", + "", + "SODIMM_133", + "", + "SODIMM_28", + "SODIMM_75", + "SODIMM_96", + "SODIMM_81", + "SODIMM_94", + "SODIMM_101", + "SODIMM_103", + "SODIMM_79", + "SODIMM_97", + "SODIMM_69", + "SODIMM_98", + "SODIMM_85", + "SODIMM_65"; +}; + +&gpio5 { + gpio-line-names = "SODIMM_43", + "SODIMM_45", + "SODIMM_137", + "SODIMM_95", + "SODIMM_107", + "SODIMM_131", + "SODIMM_93", + "", + "SODIMM_138", + "", + "SODIMM_105", + "SODIMM_127"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 - &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6 &pinctrl_gpio7>; + &pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7>; }; &iomuxc_snvs { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2 &pinctrl_snvs_gpio3>; + pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts new file mode 100644 index 000000000000..b4f65e8c5857 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2017-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-wifi.dtsi" +#include "imx6ull-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 512MB on Colibri Aster"; + compatible = "toradex,colibri-imx6ull-wifi-aster", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts index df72ce1ae2cb..1d64d1a5d8a7 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2018 Toradex AG + * Copyright 2018-2022 Toradex */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts new file mode 100644 index 000000000000..ce02f8a9ddd3 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-wifi.dtsi" +#include "imx6ull-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris V2"; + compatible = "toradex,colibri-imx6ull-wifi-iris-v2", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; + +&gpio1 { + /* This turns the LVDS transceiver on */ + lvds-power-on { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */ + line-name = "LVDS_POWER_ON"; + output-high; + }; +}; + +&gpio2 { + /* + * This switches the LVDS transceiver to the single-channel + * output mode. + */ + lvds-ch-mode { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */ + line-name = "LVDS_CH_MODE"; + output-high; + }; + + /* + * This switches the LVDS transceiver to the 24-bit RGB mode. + */ + lvds-rgb-mode { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */ + line-name = "LVDS_RGB_MODE"; + output-low; + }; +}; + +&gpio5 { + /* + * This switches the LVDS transceiver to VESA color mapping mode. + */ + lvds-color-map { + gpio-hog; + gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */ + line-name = "LVDS_COLOR_MAP"; + output-low; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts new file mode 100644 index 000000000000..5ac1aa298ce7 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-wifi.dtsi" +#include "imx6ull-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris"; + compatible = "toradex,colibri-imx6ull-wifi-iris", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi index 9f1e38282bee..db59ee6b1c86 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2018 Toradex AG + * Copyright 2018-2022 Toradex */ #include "imx6ull-colibri.dtsi" @@ -23,16 +23,152 @@ clock-frequency = <792000000>; }; +&gpio1 { + gpio-line-names = "SODIMM_8", + "SODIMM_6", + "SODIMM_129", + "", + "SODIMM_19", + "SODIMM_21", + "UNUSABLE_SODIMM_180", + "UNUSABLE_SODIMM_184", + "SODIMM_4", + "SODIMM_2", + "SODIMM_106", + "SODIMM_71", + "SODIMM_23", + "SODIMM_31", + "SODIMM_99", + "SODIMM_102", + "SODIMM_33", + "SODIMM_35", + "SODIMM_25", + "SODIMM_27", + "SODIMM_36", + "SODIMM_38", + "SODIMM_32", + "SODIMM_34", + "SODIMM_135", + "SODIMM_77", + "SODIMM_100", + "SODIMM_186", + "SODIMM_196", + "SODIMM_194"; +}; + +&gpio2 { + gpio-line-names = "SODIMM_55", + "SODIMM_63", + "SODIMM_178", + "SODIMM_188", + "SODIMM_73", + "SODIMM_30", + "SODIMM_67", + "SODIMM_104", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_190", + "SODIMM_47", + "SODIMM_192", + "SODIMM_49", + "SODIMM_51", + "SODIMM_53"; +}; + +&gpio3 { + gpio-line-names = "SODIMM_56", + "SODIMM_44", + "SODIMM_68", + "SODIMM_82", + "", + "SODIMM_76", + "SODIMM_70", + "SODIMM_60", + "SODIMM_58", + "SODIMM_78", + "SODIMM_72", + "SODIMM_80", + "SODIMM_46", + "SODIMM_62", + "SODIMM_48", + "SODIMM_74", + "SODIMM_50", + "SODIMM_52", + "SODIMM_54", + "SODIMM_66", + "SODIMM_64", + "SODIMM_57", + "SODIMM_61", + "SODIMM_29", + "SODIMM_37", + "SODIMM_88", + "SODIMM_86", + "SODIMM_92", + "SODIMM_90"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_59", + "", + "", + "SODIMM_133", + "", + "SODIMM_28", + "SODIMM_75", + "SODIMM_96", + "", + "", + "", + "", + "", + "", + "SODIMM_69", + "SODIMM_98", + "SODIMM_85", + "SODIMM_65"; +}; + +&gpio5 { + gpio-line-names = "SODIMM_43", + "SODIMM_45", + "SODIMM_137", + "SODIMM_95", + "SODIMM_107", + "SODIMM_131", + "", + "", + "", + "", + "SODIMM_105"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 - &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio7>; + &pinctrl_gpio4 &pinctrl_gpio7>; }; &iomuxc_snvs { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2>; + pinctrl-0 = <&pinctrl_snvs_gpio1>; }; &usdhc2 { diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 7f35a06dff95..15621e03fa4d 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -1,22 +1,54 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2018-2021 Toradex + * Copyright 2018-2022 Toradex */ #include "imx6ull.dtsi" / { + /* Ethernet aliases to ensure correct MAC addresses */ aliases { ethernet0 = &fec2; ethernet1 = &fec1; }; - bl: backlight { + backlight: backlight { compatible = "pwm-backlight"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_bl_on>; - enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; - status = "disabled"; + power-supply = <®_3v3>; + pwms = <&pwm4 0 5000000 1>; + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpiokeys>; + + wakeup { + debounce-interval = <10>; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ + label = "Wake-Up"; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + panel_dpi: panel-dpi { + compatible = "edt,et057090dhu"; + backlight = <&backlight>; + power-supply = <®_3v3>; + status = "okay"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; }; reg_module_3v3: regulator-module-3v3 { @@ -35,9 +67,9 @@ regulator-max-microvolt = <3300000>; }; - reg_sd1_vmmc: regulator-sd1-vmmc { + reg_sd1_vqmmc: regulator-sd1-vqmmc { compatible = "regulator-gpio"; - gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_snvs_reg_sd>; regulator-always-on; @@ -47,11 +79,25 @@ states = <1800000 0x1 3300000 0x0>; vin-supply = <®_module_3v3>; }; + + reg_eth_phy: regulator-eth-phy { + compatible = "regulator-fixed-clock"; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "+V3.3_ETH"; + regulator-type = "voltage"; + vin-supply = <®_module_3v3>; + clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>; + startup-delay-us = <150000>; + }; }; &adc1 { num-channels = <10>; vref-supply = <®_module_3v3_avdd>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; }; &can1 { @@ -73,12 +119,14 @@ pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; }; +/* Ethernet */ &fec2 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&pinctrl_enet2>; pinctrl-1 = <&pinctrl_enet2_sleep>; phy-mode = "rmii"; phy-handle = <ðphy1>; + phy-supply = <®_eth_phy>; status = "okay"; mdio { @@ -93,9 +141,11 @@ }; }; +/* NAND */ &gpmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; + fsl,use-minimum-ecc; nand-on-flash-bbt; nand-ecc-mode = "hw"; nand-ecc-strength = <8>; @@ -103,15 +153,35 @@ status = "okay"; }; +/* I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) */ &i2c1 { pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + /* Atmel maxtouch controller */ + atmel_mxt_ts: touchscreen@4a { + compatible = "atmel,maxtouch"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_atmel_conn>; + reg = <0x4a>; + interrupt-parent = <&gpio5>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 / INT */ + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 106 / RST */ + status = "disabled"; + }; }; +/* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ &i2c2 { + /* Use low frequency to compensate for the high pull-up values. */ + clock-frequency = <40000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; @@ -119,7 +189,7 @@ scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - ad7879@2c { + ad7879_ts: touchscreen@2c { compatible = "adi,ad7879-1"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_snvs_ad7879_int>; @@ -140,23 +210,33 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; + + port { + lcdif_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; }; +/* PWM <A> */ &pwm4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; }; +/* PWM <B> */ &pwm5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm5>; }; +/* PWM <C> */ &pwm6 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm6>; }; +/* PWM <D> */ &pwm7 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm7>; @@ -170,6 +250,7 @@ status = "disabled"; }; +/* Colibri UART_A */ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>; @@ -177,6 +258,7 @@ fsl,dte-mode; }; +/* Colibri UART_B */ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; @@ -184,12 +266,14 @@ fsl,dte-mode; }; +/* Colibri UART_C */ &uart5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5>; fsl,dte-mode; }; +/* Colibri USBC */ &usbotg1 { dr_mode = "otg"; srp-disable; @@ -197,14 +281,28 @@ adp-disable; }; +/* Colibri USBH */ &usbotg2 { dr_mode = "host"; }; +/* Colibri MMC/SD */ &usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>; + pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd_sleep>; assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>; assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>; assigned-clock-rates = <0>, <198000000>; + bus-width = <4>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* MMC_CD */ + disable-wp; + keep-power-in-suspend; + no-1-8-v; + vqmmc-supply = <®_sd1_vqmmc>; + wakeup-source; }; &wdog1 { @@ -214,13 +312,36 @@ }; &iomuxc { - pinctrl_can_int: canint-grp { + pinctrl_adc1: adc1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x3000 /* SODIMM 8 */ + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x3000 /* SODIMM 6 */ + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x3000 /* SODIMM 4 */ + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x3000 /* SODIMM 2 */ + >; + }; + + pinctrl_atmel_adap: atmeladapgrp { + fsl,pins = < + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0xb0a0 /* SODIMM 28 */ + MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05 0xb0a0 /* SODIMM 30 */ + >; + }; + + pinctrl_atmel_conn: atmelconngrp { + fsl,pins = < + MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0xb0a0 /* SODIMM 106 */ + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */ + >; + }; + + pinctrl_can_int: canintgrp { fsl,pins = < MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x13010 /* SODIMM 73 */ >; }; - pinctrl_enet2: enet2-grp { + pinctrl_enet2: enet2grp { fsl,pins = < MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 @@ -235,7 +356,7 @@ >; }; - pinctrl_enet2_sleep: enet2sleepgrp { + pinctrl_enet2_sleep: enet2-sleepgrp { fsl,pins = < MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x0 MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x0 @@ -250,13 +371,13 @@ >; }; - pinctrl_ecspi1_cs: ecspi1-cs-grp { + pinctrl_ecspi1_cs: ecspi1csgrp { fsl,pins = < MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x70a0 /* SODIMM 86 */ >; }; - pinctrl_ecspi1: ecspi1-grp { + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x000a0 /* SODIMM 88 */ MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x000a0 /* SODIMM 92 */ @@ -264,27 +385,27 @@ >; }; - pinctrl_flexcan1: flexcan1-grp { + pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x1b020 MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x1b020 >; }; - pinctrl_flexcan2: flexcan2-grp { + pinctrl_flexcan2: flexcan2grp { fsl,pins = < MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020 MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x1b020 >; }; - pinctrl_gpio_bl_on: gpio-bl-on-grp { + pinctrl_gpio_bl_on: gpioblongrp { fsl,pins = < MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x30a0 /* SODIMM 71 */ >; }; - pinctrl_gpio1: gpio1-grp { + pinctrl_gpio1: gpio1grp { fsl,pins = < MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x10b0 /* SODIMM 77 */ MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x70a0 /* SODIMM 99 */ @@ -297,7 +418,7 @@ >; }; - pinctrl_gpio2: gpio2-grp { /* Camera */ + pinctrl_gpio2: gpio2grp { /* Camera */ fsl,pins = < MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x10b0 /* SODIMM 69 */ MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x10b0 /* SODIMM 75 */ @@ -307,26 +428,20 @@ >; }; - pinctrl_gpio3: gpio3-grp { /* CAN2 */ + pinctrl_gpio3: gpio3grp { /* CAN2 */ fsl,pins = < MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x10b0 /* SODIMM 178 */ MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x10b0 /* SODIMM 188 */ >; }; - pinctrl_gpio4: gpio4-grp { + pinctrl_gpio4: gpio4grp { fsl,pins = < MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x10b0 /* SODIMM 65 */ >; }; - pinctrl_gpio5: gpio5-grp { /* ATMEL MXT TOUCH */ - fsl,pins = < - MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0xb0a0 /* SODIMM 106 */ - >; - }; - - pinctrl_gpio6: gpio6-grp { /* Wifi pins */ + pinctrl_gpio6: gpio6grp { /* Wifi pins */ fsl,pins = < MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x10b0 /* SODIMM 89 */ MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x10b0 /* SODIMM 79 */ @@ -338,7 +453,7 @@ >; }; - pinctrl_gpio7: gpio7-grp { /* CAN1 */ + pinctrl_gpio7: gpio7grp { /* CAN1 */ fsl,pins = < MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0xb0b0/* SODIMM 55 */ MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0xb0b0 /* SODIMM 63 */ @@ -347,9 +462,9 @@ /* * With an eMMC instead of a raw NAND device the following pins - * are available at SODIMM pins + * are available at SODIMM pins. */ - pinctrl_gpmi_gpio: gpmi-gpio-grp { + pinctrl_gpmi_gpio: gpmigpiogrp { fsl,pins = < MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x10b0 /* SODIMM 140 */ MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0x10b0 /* SODIMM 144 */ @@ -358,7 +473,7 @@ >; }; - pinctrl_gpmi_nand: gpmi-nand-grp { + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x100a9 MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x100a9 @@ -377,35 +492,35 @@ >; }; - pinctrl_i2c1: i2c1-grp { + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 /* SODIMM 196 */ MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 /* SODIMM 194 */ >; }; - pinctrl_i2c1_gpio: i2c1-gpio-grp { + pinctrl_i2c1_gpio: i2c1-gpiogrp { fsl,pins = < MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0 /* SODIMM 196 */ MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0 /* SODIMM 194 */ >; }; - pinctrl_i2c2: i2c2-grp { + pinctrl_i2c2: i2c2grp { fsl,pins = < - MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 - MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001f8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001f8b0 >; }; - pinctrl_i2c2_gpio: i2c2-gpio-grp { + pinctrl_i2c2_gpio: i2c2-gpiogrp { fsl,pins = < - MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001b8b0 - MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001b8b0 + MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001f8b0 + MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001f8b0 >; }; - pinctrl_lcdif_dat: lcdif-dat-grp { + pinctrl_lcdif_dat: lcdifdatgrp { fsl,pins = < MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079 /* SODIMM 76 */ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079 /* SODIMM 70 */ @@ -428,7 +543,7 @@ >; }; - pinctrl_lcdif_ctrl: lcdif-ctrl-grp { + pinctrl_lcdif_ctrl: lcdifctrlgrp { fsl,pins = < MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x00079 /* SODIMM 56 */ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x00079 /* SODIMM 44 */ @@ -437,31 +552,31 @@ >; }; - pinctrl_pwm4: pwm4-grp { + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x00079 /* SODIMM 59 */ >; }; - pinctrl_pwm5: pwm5-grp { + pinctrl_pwm5: pwm5grp { fsl,pins = < MX6UL_PAD_NAND_DQS__PWM5_OUT 0x00079 /* SODIMM 28 */ >; }; - pinctrl_pwm6: pwm6-grp { + pinctrl_pwm6: pwm6grp { fsl,pins = < MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00079 /* SODIMM 30 */ >; }; - pinctrl_pwm7: pwm7-grp { + pinctrl_pwm7: pwm7grp { fsl,pins = < MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00079 /* SODIMM 67 */ >; }; - pinctrl_uart1: uart1-grp { + pinctrl_uart1: uart1grp { fsl,pins = < MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x1b0b1 /* SODIMM 33 */ MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x1b0b1 /* SODIMM 35 */ @@ -470,16 +585,16 @@ >; }; - pinctrl_uart1_ctrl1: uart1-ctrl1-grp { /* Additional DTR, DCD */ + pinctrl_uart1_ctrl1: uart1ctrl1grp { /* Additional DTR, DCD */ fsl,pins = < - MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x70a0 /* SODIMM 31 */ - MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x10b0 /* SODIMM 29 */ - MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x90b1 /* SODIMM 23 */ - MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x10b0 /* SODIMM 37 */ + MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x70a0 /* SODIMM 31 / DCD */ + MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x10b0 /* SODIMM 29 / DSR */ + MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x90b1 /* SODIMM 23 / DTR */ + MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x10b0 /* SODIMM 37 / RI */ >; }; - pinctrl_uart2: uart2-grp { + pinctrl_uart2: uart2grp { fsl,pins = < MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x1b0b1 /* SODIMM 36 */ MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x1b0b1 /* SODIMM 38 */ @@ -487,23 +602,23 @@ MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x1b0b1 /* SODIMM 34 */ >; }; - pinctrl_uart5: uart5-grp { + pinctrl_uart5: uart5grp { fsl,pins = < MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x1b0b1 /* SODIMM 19 */ MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x1b0b1 /* SODIMM 21 */ >; }; - pinctrl_usbh_reg: gpio-usbh-reg { + pinctrl_usbh_reg: usbhreggrp { fsl,pins = < - MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x10b0 /* SODIMM 129 */ + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x10b0 /* SODIMM 129 / USBH_PEN */ >; }; - pinctrl_usdhc1: usdhc1-grp { + pinctrl_usdhc1: usdhc1grp { fsl,pins = < - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17059 /* SODIMM 47 */ - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x10059 /* SODIMM 190 */ + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 /* SODIMM 47 */ + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 /* SODIMM 190 */ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 /* SODIMM 192 */ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 /* SODIMM 49 */ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 /* SODIMM 51 */ @@ -511,10 +626,10 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170b9 - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x100b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 @@ -522,25 +637,25 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170f9 - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x100f9 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 >; }; - pinctrl_usdhc2: usdhc2-grp { + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17069 MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17069 MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17069 MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17069 MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17069 - MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17069 + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10069 MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x10 >; @@ -561,7 +676,7 @@ >; }; - pinctrl_wdog: wdog-grp { + pinctrl_wdog: wdoggrp { fsl,pins = < MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 >; @@ -569,65 +684,59 @@ }; &iomuxc_snvs { - pinctrl_snvs_gpio1: snvs-gpio1-grp { + pinctrl_snvs_gpio1: snvsgpio1grp { fsl,pins = < MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x110a0 /* SODIMM 93 */ MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x110a0 /* SODIMM 95 */ MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x1b0a0 /* SODIMM 105 */ - MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0a0 /* SODIMM 131 */ + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0a0 /* SODIMM 131 / USBH_OC */ MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x110a0 /* SODIMM 138 */ >; }; - pinctrl_snvs_gpio2: snvs-gpio2-grp { /* ATMEL MXT TOUCH */ - fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */ - >; - }; - - pinctrl_snvs_gpio3: snvs-gpio3-grp { /* Wifi pins */ + pinctrl_snvs_gpio3: snvsgpio3grp { /* Wifi pins */ fsl,pins = < MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0 /* SODIMM 127 */ >; }; - pinctrl_snvs_ad7879_int: snvs-ad7879-int-grp { /* TOUCH Interrupt */ + pinctrl_snvs_ad7879_int: snvsad7879intgrp { /* TOUCH Interrupt */ fsl,pins = < MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x100b0 >; }; - pinctrl_snvs_reg_sd: snvs-reg-sd-grp { + pinctrl_snvs_reg_sd: snvsregsdgrp { fsl,pins = < MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x400100b0 >; }; - pinctrl_snvs_usbc_det: snvs-usbc-det-grp { + pinctrl_snvs_usbc_det: snvsusbcdetgrp { fsl,pins = < MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x130b0 >; }; - pinctrl_snvs_gpiokeys: snvs-gpiokeys-grp { + pinctrl_snvs_gpiokeys: snvsgpiokeysgrp { fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x130a0 /* SODIMM 45 */ + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x130a0 /* SODIMM 45 / WAKE_UP */ >; }; - pinctrl_snvs_usdhc1_cd: snvs-usdhc1-cd-grp { + pinctrl_snvs_usdhc1_cd: snvsusdhc1cdgrp { fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0a0 /* SODIMM 43 */ + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0a0 /* SODIMM 43 / MMC_CD */ >; }; - pinctrl_snvs_usdhc1_sleep_cd: snvs-usdhc1-cd-grp-slp { + pinctrl_snvs_usdhc1_cd_sleep: snvsusdhc1cd-sleepgrp { fsl,pins = < MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0 >; }; - pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp { + pinctrl_snvs_wifi_pdn: snvswifipdngrp { fsl,pins = < MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0 >; diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi index b7e984284e1a..d000606c0704 100644 --- a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi +++ b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi @@ -18,7 +18,7 @@ }; &qspi { - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spi-nand"; diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts b/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts new file mode 100644 index 000000000000..14adb87da911 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 PHYTEC Messtechnik GmbH + * Author: Alexander Bauer <a.bauer@phytec.de> + */ + +/dts-v1/; +#include "imx6ull-phytec-tauri.dtsi" + +/ { + model = "PHYTEC phyGate-Tauri i.MX6 UltraLite"; + compatible = "phytec,imx6ull-phygate-tauri", + "phytec,imx6ull-phygate-tauri-emmc", + "phytec,imx6ull-pcl063", "fsl,imx6ull"; +}; + +/* EMMC-Version */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts new file mode 100644 index 000000000000..ae396ac63443 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 PHYTEC Messtechnik GmbH + * Author: Alexander Bauer <a.bauer@phytec.de> + */ + +/dts-v1/; +#include "imx6ull-phytec-tauri.dtsi" + +/ { + model = "PHYTEC phyGate-Tauri i.MX6 UltraLite"; + compatible = "phytec,imx6ull-phygate-tauri", + "phytec,imx6ull-phygate-tauri-nand", + "phytec,imx6ull-pcl063", "fsl,imx6ull"; +}; + +/* NAND-Version */ +&gpmi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi new file mode 100644 index 000000000000..5464a52a1f94 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi @@ -0,0 +1,588 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 PHYTEC Messtechnik GmbH + * Author: Alexander Bauer <a.bauer@phytec.de> + */ + +/dts-v1/; +#include "imx6ull.dtsi" +#include "imx6ull-phytec-phycore-som.dtsi" + +/ { + + model = "PHYTEC phyGate-Tauri i.MX6 UltraLite"; + compatible = "phytec,imx6ull-phygate-tauri", + "phytec,imx6ull-pcl063", "fsl,imx6ull"; + + aliases { + rtc0 = &i2c_rtc; + rtc1 = &snvs_rtc; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-key"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + key { + label = "KEY-A"; + gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + linux,code = <KEY_A>; + wakeup-source; + }; + }; + + reg_adc1_vref_3v3: regulator-vref-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vref-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_s25fl064_hold: regulator-s25fl064-hold { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_s25fl064_hold>; + compatible = "regulator-fixed"; + regulator-name = "s25fl064_hold"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usb_hub_vbus: regulator-hub-otg1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhubpwr>; + compatible = "regulator-fixed"; + regulator-name = "usb_hub_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1pwr>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + user_leds: user-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_user_leds>, + <&pinctrl_user_leds_snvs>; + + user-led1 { + label = "yellow"; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "off"; + }; + + user-led2 { + label = "red"; + gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "off"; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>, + <&pinctrl_ecspi1_cs>; + cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>, + <&gpio3 10 GPIO_ACTIVE_LOW>, + <&gpio3 11 GPIO_ACTIVE_LOW>; + status = "okay"; + + tpm_tis: tpm@1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm>; + compatible = "tcg,tpm_tis-spi"; + reg = <1>; + spi-max-frequency = <20000000>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + }; + + s25fl064: flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = " jedec,spi-nor"; + reg = <2>; + spi-max-frequency = <40000000>; + m25p,fast-read; + status = "disabled"; + }; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + dmas = <&sdma 7 8 0>, + <&sdma 8 8 0>; + dma-names = "rx", "tx"; + status = "okay"; +}; + +ðphy1 { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <ðphy2>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + tmp102: tmp@49 { + compatible = "ti,tmp102"; + reg = <0x49>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tempsense>; + interrupt-parent = <&gpio5>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; + + i2c_rtc: rtc@68 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_int>; + compatible = "microcrystal,rv4162"; + reg = <0x68>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + sda-gpios = <&gpio3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio3 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&mdio { + ethphy2: ethernet-phy@2 { + reg = <2>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; + status = "okay"; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm6>; + status = "okay"; +}; + +&pwm7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm7>; + status = "okay"; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +/* UART4 * RS485 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + rts-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>; + rs485-rts-active-high; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +/* UART5 * RS232 */ +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + uart-has-rtscts; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7>; + status = "okay"; +}; + +/* USB */ +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + vbus-supply = <®_usb_otg1_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_hub_vbus>; + disable-over-current; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&usdhc2 { + status = "disabled"; +}; + +&iomuxc_snvs { + pinctrl_rtc_int: rtcintgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059 + >; + }; + + pinctrl_stmpe: stmpegrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 + >; + }; + + pinctrl_tempsense: tempsensegrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17059 + >; + }; + + pinctrl_tpm: tpmgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059 + >; + }; + + pinctrl_usbhubpwr: usbhubpwrgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x17059 + >; + }; + + pinctrl_user_leds_snvs: user_ledsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79 + >; + }; +}; + +&iomuxc { + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x17059 /* nUART_MUX_RS232 */ + MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x17059 /* nUART_MUX_DUAL_RX_TX */ + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x79 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x100b1 + MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x100b1 + MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x100b1 + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x100b1 + MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x100b1 + MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x100b1 + >; + }; + + pinctrl_ecspi1_cs: ecspi1csgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x10b0 + MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x10b0 + MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x10b0 + >; + }; + + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b010 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b010 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b010 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b010 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX 0x0b0b0 + MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX 0x0b0b0 + >; + }; + + princtrl_flexcan2_en: flexcan2engrp { + fsl,pins = < + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x17059 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0xb0 + MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0xb0 + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0xb0 + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA01__I2C3_SCL 0xb0 + MX6UL_PAD_LCD_DATA00__I2C3_SDA 0xb0 + >; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA01__GPIO3_IO06 0xb0 + MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0xb0 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA03__I2C4_SCL 0xb0 + MX6UL_PAD_LCD_DATA02__I2C4_SDA 0xb0 + >; + }; + + pinctrl_i2c4_gpio: i2c4gpiogrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0xb0 + MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0xb0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0 + >; + }; + + pinctrl_pwm6: pwm6grp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__PWM6_OUT 0x0b0b0 + >; + }; + + pinctrl_pwm7: pwm7grp { + fsl,pins = < + MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x0b0b0 + >; + }; + + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_JTAG_TRST_B__PWM8_OUT 0x0b0b0 + >; + }; + + pinctrl_s25fl064_hold: s25fl064holdgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x100b1 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 + MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x1b0b1 + MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x1b0b1 + MX6UL_PAD_LCD_HSYNC__GPIO3_IO02 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart7: uart7grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x1b0b1 + MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x80 + >; + }; + + pinctrl_usbotg1pwr: usbotg1pwrgrp { + fsl,pins = < + MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1100mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1200mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; + + pinctrl_user_leds: userledsgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x79 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts b/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts new file mode 100644 index 000000000000..e593b7036fc7 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/dts-v1/; + +#include "imx6ull-tqma6ull2.dtsi" +#include "mba6ulx.dtsi" + +/ { + model = "TQ-Systems TQMa6ULL2 SoM on MBa6ULx board"; + compatible = "tq,imx6ull-tqma6ull2-mba6ulx", "tq,imx6ull-tqma6ull2", "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi b/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi new file mode 100644 index 000000000000..326e6da91ed4 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6ull.dtsi" +#include "imx6ul-tqma6ul-common.dtsi" +#include "imx6ul-tqma6ulx-common.dtsi" + +/ { + model = "TQ-Systems TQMa6ULL2 SoM"; + compatible = "tq,imx6ull-tqma6ull2", "fsl,imx6ull"; +}; + +&usdhc2 { + fsl,tuning-step= <6>; + /* Errata ERR010450 Workaround */ + max-frequency = <99000000>; + assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>; + assigned-clock-rates = <0>, <198000000>; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017031 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017039 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017039 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017039 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017039 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017039 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017039 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017039 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017039 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017039 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts b/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts new file mode 100644 index 000000000000..33437aae9822 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/dts-v1/; + +#include "imx6ull-tqma6ull2l.dtsi" +#include "mba6ulx.dtsi" + +/ { + model = "TQ Systems TQMa6ULL2L SoM on MBa6ULx board"; + compatible = "tq,imx6ull-tqma6ull2l-mba6ulx", "tq,imx6ull-tqma6ull2l", "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi b/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi new file mode 100644 index 000000000000..8e4d5cd18614 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6ull.dtsi" +#include "imx6ul-tqma6ul-common.dtsi" +#include "imx6ul-tqma6ulxl-common.dtsi" + +/ { + model = "TQ Systems TQMa6ULL2L SoM"; + compatible = "tq,imx6ull-tqma6ull2l", "fsl,imx6ull"; +}; + +&usdhc2 { + fsl,tuning-step= <6>; + /* Errata ERR010450 Workaround */ + max-frequency = <99000000>; + assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>; + assigned-clock-rates = <0>, <198000000>; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017031 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017039 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017039 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017039 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017039 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017039 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017039 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017039 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017039 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017039 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-smegw01.dts b/arch/arm/boot/dts/imx7d-smegw01.dts new file mode 100644 index 000000000000..c6b32064a009 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-smegw01.dts @@ -0,0 +1,469 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// +// Copyright (C) 2020 PHYTEC Messtechnik GmbH +// Author: Jens Lang <J.Lang@phytec.de> +// Copyright (C) 2021 Fabio Estevam <festevam@denx.de> + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include "imx7d.dtsi" + +/ { + model = "Storopack SMEGW01 board"; + compatible = "storopack,imx7d-smegw01", "fsl,imx7d"; + + aliases { + mmc0 = &usdhc1; + mmc1 = &usdhc3; + mmc2 = &usdhc2; + rtc0 = &i2c_rtc; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reg_lte_on: regulator-lte-on { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lte_on>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "lte_on"; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_lte_nreset: regulator-lte-nreset { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lte_nreset>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "LTE_nReset"; + gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi>; + regulator-name = "wifi_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_wlan_rfkill: regulator-wlan-rfkill { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-2 = <&pinctrl_rfkill>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "wlan_rfkill"; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usbotg_vbus: regulator-usbotg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_pwr_gpio>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 05 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; + status = "okay"; + + sram@0 { + compatible = "microchip,48l640"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <16000000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + }; + + ethphy1: ethernet-phy@2 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + reg = <2>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy1>; + fsl,magic-packet; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 =<&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + i2c_rtc: rtc@52 { + compatible = "microcrystal,rv3028"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_int>; + reg = <0x52>; + interrupt-parent = <&gpio2>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_lpsr>; + dr_mode = "otg"; + vbus-supply = <®_usbotg_vbus>; + status = "okay"; +}; + +&usbotg2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + no-1-8-v; + enable-sdio-wakeup; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + cap-sd-highspeed; + sd-uhs-ddr50; + mmc-ddr-1_8v; + vmmc-supply = <®_wifi>; + enable-sdio-wakeup; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + max-frequency = <200000000>; + bus-width = <8>; + fsl,tuning-step = <1>; + non-removable; + cap-mmc-highspeed; + cap-mmc-hw-reset; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x04 + MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x04 + MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x04 + MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x04 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x5 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x5 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x5 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x5 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x5 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x5 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x5 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x5 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x5 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x5 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x5 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x5 + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x7 + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x7 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x5 + MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x5 + MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x5 + MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x5 + MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x5 + MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x5 + MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x5 + MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x5 + MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x5 + MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x5 + MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x5 + MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x5 + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x08 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x40000004 + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x40000004 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x0b0b0 + MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x0b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x0b0b0 + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x0b0b0 + >; + }; + + pinctrl_lte_on: lteongrp { + fsl,pins = < + MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x17059 + >; + }; + + pinctrl_lte_nreset: ltenresetgrp { + fsl,pins = < + MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x17059 + >; + }; + + pinctrl_rfkill: rfkillrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x17059 + >; + }; + + pinctrl_rtc_int: rtcintgrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x17059 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x74 + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x7c + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x7c + MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x74 + >; + }; + + pinctrl_usbotg1_lpsr: usbotg1 { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x04 + >; + }; + + pinctrl_usbotg1_pwr: usbotg1-pwr { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR 0x04 + >; + }; + + pinctrl_usbotg1_pwr_gpio: usbotg1-pwr-gpio { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x04 + >; + }; + + pinctrl_usbotg2: usbotg2grp { + fsl,pins = < + MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x04 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX7D_PAD_SD2_CLK__SD2_CLK 0x19 + MX7D_PAD_SD2_CMD__SD2_CMD 0x59 + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 + MX7D_PAD_SD2_CD_B__SD2_CD_B 0x08 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5d + MX7D_PAD_SD3_CLK__SD3_CLK 0x1d + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5d + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5d + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5d + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5d + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5d + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5d + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5d + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5d + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1d + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5e + MX7D_PAD_SD3_CLK__SD3_CLK 0x1e + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5e + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5e + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5e + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5e + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5e + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5e + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5e + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5e + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1e + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5f + MX7D_PAD_SD3_CLK__SD3_CLK 0x0f + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5f + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5f + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5f + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5f + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5f + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5f + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5f + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5f + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1f + >; + }; + + pinctrl_wifi: wifigrp { + fsl,pins = < + MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x04 + MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x04 + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 5af6d58666f4..008e3da460f1 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -446,7 +446,7 @@ status = "disabled"; }; - iomuxc_lpsr: iomuxc-lpsr@302c0000 { + iomuxc_lpsr: pinctrl@302c0000 { compatible = "fsl,imx7d-iomuxc-lpsr"; reg = <0x302c0000 0x10000>; fsl,input-sel = <&iomuxc>; diff --git a/arch/arm/boot/dts/imxrt1050-evk.dts b/arch/arm/boot/dts/imxrt1050-evk.dts new file mode 100644 index 000000000000..6a9c10decf52 --- /dev/null +++ b/arch/arm/boot/dts/imxrt1050-evk.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +/dts-v1/; +#include "imxrt1050.dtsi" +#include "imxrt1050-pinfunc.h" + +/ { + model = "NXP IMXRT1050-evk board"; + compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050"; + + chosen { + stdout-path = &lpuart1; + }; + + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + mmc0 = &usdhc1; + serial0 = &lpuart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x2000000>; + }; +}; + +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD 0xf1 + MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD 0xf1 + >; + }; + + pinctrl_usdhc0: usdhc0grp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B 0x1B000 + MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT 0xB069 + MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0 0x17061 + >; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc0>; + pinctrl-1 = <&pinctrl_usdhc0>; + pinctrl-2 = <&pinctrl_usdhc0>; + pinctrl-3 = <&pinctrl_usdhc0>; + cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imxrt1050.dtsi b/arch/arm/boot/dts/imxrt1050.dtsi new file mode 100644 index 000000000000..77b911b06041 --- /dev/null +++ b/arch/arm/boot/dts/imxrt1050.dtsi @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +#include "armv7-m.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/imxrt1050-clock.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + clocks { + osc: osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + osc3M: osc3M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <3000000>; + }; + }; + + soc { + lpuart1: serial@40184000 { + compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x40184000 0x4000>; + interrupts = <20>; + clocks = <&clks IMXRT1050_CLK_LPUART1>; + clock-names = "ipg"; + status = "disabled"; + }; + + iomuxc: pinctrl@401f8000 { + compatible = "fsl,imxrt1050-iomuxc"; + reg = <0x401f8000 0x4000>; + fsl,mux_mask = <0x7>; + }; + + anatop: anatop@400d8000 { + compatible = "fsl,imxrt-anatop"; + reg = <0x400d8000 0x4000>; + }; + + clks: clock-controller@400fc000 { + compatible = "fsl,imxrt1050-ccm"; + reg = <0x400fc000 0x4000>; + interrupts = <95>, <96>; + clocks = <&osc>; + clock-names = "osc"; + #clock-cells = <1>; + assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>, + <&clks IMXRT1050_CLK_PLL1_BYPASS>, + <&clks IMXRT1050_CLK_PLL2_BYPASS>, + <&clks IMXRT1050_CLK_PLL3_BYPASS>, + <&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>, + <&clks IMXRT1050_CLK_PLL2_PFD2_396M>; + assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>, + <&clks IMXRT1050_CLK_PLL1_ARM>, + <&clks IMXRT1050_CLK_PLL2_SYS>, + <&clks IMXRT1050_CLK_PLL3_USB_OTG>, + <&clks IMXRT1050_CLK_PLL3_USB_OTG>, + <&clks IMXRT1050_CLK_PLL2_SYS>; + }; + + edma1: dma-controller@400e8000 { + #dma-cells = <2>; + compatible = "fsl,imx7ulp-edma"; + reg = <0x400e8000 0x4000>, + <0x400ec000 0x4000>; + dma-channels = <32>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>, + <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>; + clock-names = "dma", "dmamux0"; + clocks = <&clks IMXRT1050_CLK_DMA>, + <&clks IMXRT1050_CLK_DMA_MUX>; + }; + + usdhc1: mmc@402c0000 { + compatible ="fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x402c0000 0x4000>; + interrupts = <110>; + clocks = <&clks IMXRT1050_CLK_IPG_PDOF>, + <&clks IMXRT1050_CLK_OSC>, + <&clks IMXRT1050_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,wp-controller; + no-1-8-v; + max-frequency = <4000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + gpio1: gpio@401b8000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401b8000 0x4000>; + interrupts = <80>, <81>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@401bc000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401bc000 0x4000>; + interrupts = <82>, <83>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@401c0000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401c0000 0x4000>; + interrupts = <84>, <85>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@401c4000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401c4000 0x4000>; + interrupts = <86>, <87>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@400c0000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x400c0000 0x4000>; + interrupts = <88>, <89>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpt: timer@401ec000 { + compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt"; + reg = <0x401ec000 0x4000>; + interrupts = <100>; + clocks = <&osc3M>; + clock-names = "per"; + }; + }; +}; diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts index 66fec5f5d081..5d6d074011df 100644 --- a/arch/arm/boot/dts/keystone-k2e-evm.dts +++ b/arch/arm/boot/dts/keystone-k2e-evm.dts @@ -137,10 +137,10 @@ }; &spi0 { - nor_flash: n25q128a11@0 { + nor_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "Micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <54000000>; m25p,fast-read; reg = <0>; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index d800f26b6275..88be868cf71e 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -392,7 +392,7 @@ pinctrl-0 = <&qspi_pins>; cdns,rclk-en; - flash0: m25p80@0 { + flash0: flash@0 { compatible = "s25fl512s", "jedec,spi-nor"; reg = <0>; spi-tx-bus-width = <1>; diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts index 2a2d38cf0fff..bd84d7f0f2fe 100644 --- a/arch/arm/boot/dts/keystone-k2g-ice.dts +++ b/arch/arm/boot/dts/keystone-k2g-ice.dts @@ -325,7 +325,7 @@ cdns,rclk-en; status = "okay"; - flash0: m25p80@0 { + flash0: flash@0 { compatible = "s25fl256s1", "jedec,spi-nor"; reg = <0>; spi-tx-bus-width = <1>; diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts index ad4e22afe133..4a91f5ded402 100644 --- a/arch/arm/boot/dts/keystone-k2hk-evm.dts +++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts @@ -161,10 +161,10 @@ }; &spi0 { - nor_flash: n25q128a11@0 { + nor_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "Micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <54000000>; m25p,fast-read; reg = <0>; diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts index e200533d26a4..1c880cf8fa91 100644 --- a/arch/arm/boot/dts/keystone-k2l-evm.dts +++ b/arch/arm/boot/dts/keystone-k2l-evm.dts @@ -110,10 +110,10 @@ }; &spi0 { - nor_flash: n25q128a11@0 { + nor_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "Micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <54000000>; m25p,fast-read; reg = <0>; diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts index b3ad3f607d31..c32300611d2c 100644 --- a/arch/arm/boot/dts/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -78,7 +78,7 @@ spi@10600 { status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "mxicy,mx25l12805d", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi index 217bd374e52b..8f6c387d3a8b 100644 --- a/arch/arm/boot/dts/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/kirkwood-synology.dtsi @@ -198,7 +198,7 @@ spi@10600 { status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts new file mode 100644 index 000000000000..0f555eb45bda --- /dev/null +++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for the Kontron KSwitch D10 MMT 6G-2GS + */ + +/dts-v1/; +#include "lan966x-kontron-kswitch-d10-mmt.dtsi" + +/ { + model = "Kontron KSwitch D10 MMT 6G-2GS"; + compatible = "kontron,kswitch-d10-mmt-6g-2gs", "kontron,s1921", + "microchip,lan9668", "microchip,lan966"; + + aliases { + i2c0 = &i2c4; + i2c1 = &i2c1; + }; + + sfp0: sfp0 { + compatible = "sff,sfp"; + i2c-bus = <&i2c4>; + los-gpios = <&sgpio_in 1 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in 1 1 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2500>; + tx-disable-gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in 0 2 GPIO_ACTIVE_HIGH>; + rate-select0-gpios = <&sgpio_out 2 0 GPIO_ACTIVE_HIGH>; + rate-select1-gpios = <&sgpio_out 2 1 GPIO_ACTIVE_HIGH>; + }; + + sfp1: sfp1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpios = <&sgpio_in 1 2 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in 1 3 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2500>; + tx-disable-gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in 0 3 GPIO_ACTIVE_HIGH>; + rate-select0-gpios = <&sgpio_out 2 2 GPIO_ACTIVE_HIGH>; + rate-select1-gpios = <&sgpio_out 2 3 GPIO_ACTIVE_HIGH>; + }; +}; + +&flx1 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; + + i2c1: i2c@600 { + pinctrl-0 = <&fc1_c_pins>; + pinctrl-names = "default"; + status = "okay"; + }; +}; + +&flx4 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; + + i2c4: i2c@600 { + pinctrl-0 = <&fc4_b_pins>; + pinctrl-names = "default"; + status = "okay"; + }; +}; + +&gpio { + fc1_c_pins: fc1-c-i2c-pins { + /* SCL, SDA */ + pins = "GPIO_47", "GPIO_48"; + function = "fc1_c"; + }; + + fc4_b_pins: fc4-b-i2c-pins { + /* SCL, SDA */ + pins = "GPIO_57", "GPIO_58"; + function = "fc4_b"; + }; +}; + +&port2 { + phys = <&serdes 2 SERDES6G(0)>; + sfp = <&sfp0>; + managed = "in-band-status"; + phy-mode = "sgmii"; + status = "okay"; +}; + +&port3 { + phys = <&serdes 3 SERDES6G(1)>; + sfp = <&sfp1>; + managed = "in-band-status"; + phy-mode = "sgmii"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts new file mode 100644 index 000000000000..5feef9a59a79 --- /dev/null +++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for the Kontron KSwitch D10 MMT 8G + */ + +/dts-v1/; +#include "lan966x-kontron-kswitch-d10-mmt.dtsi" + +/ { + model = "Kontron KSwitch D10 MMT 8G"; + compatible = "kontron,kswitch-d10-mmt-8g", "kontron,s1921", + "microchip,lan9668", "microchip,lan966"; +}; + +&mdio0 { + phy2: ethernet-phy@3 { + reg = <3>; + }; + + phy3: ethernet-phy@4 { + reg = <4>; + }; +}; + +&port2 { + phys = <&serdes 2 SERDES6G(0)>; + phy-handle = <&phy2>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "okay"; +}; + +&port3 { + phys = <&serdes 3 SERDES6G(1)>; + phy-handle = <&phy3>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi new file mode 100644 index 000000000000..4cab1b3b3b29 --- /dev/null +++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Common part of the device tree for the Kontron KSwitch D10 MMT + */ + +/dts-v1/; +#include "lan966x.dtsi" +#include "dt-bindings/phy/phy-lan966x-serdes.h" + +/ { + aliases { + serial0 = &usart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio 56 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +&flx0 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; + status = "okay"; + + usart0: serial@200 { + pinctrl-0 = <&usart0_pins>; + pinctrl-names = "default"; + status = "okay"; + }; +}; + +&flx3 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>; + status = "okay"; + + spi3: spi@400 { + pinctrl-0 = <&fc3_b_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + }; +}; + +&gpio { + fc3_b_pins: fc3-b-pins { + /* SCK, MISO, MOSI */ + pins = "GPIO_51", "GPIO_52", "GPIO_53"; + function = "fc3_b"; + }; + + miim_c_pins: miim-c-pins { + /* MDC, MDIO */ + pins = "GPIO_59", "GPIO_60"; + function = "miim_c"; + }; + + sgpio_a_pins: sgpio-a-pins { + /* SCK, D0, D1 */ + pins = "GPIO_32", "GPIO_33", "GPIO_34"; + function = "sgpio_a"; + }; + + sgpio_b_pins: sgpio-b-pins { + /* LD */ + pins = "GPIO_64"; + function = "sgpio_b"; + }; + + usart0_pins: usart0-pins { + /* RXD, TXD */ + pins = "GPIO_25", "GPIO_26"; + function = "fc0_b"; + }; +}; + +&mdio0 { + pinctrl-0 = <&miim_c_pins>; + pinctrl-names = "default"; + reset-gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + clock-frequency = <2500000>; + status = "okay"; + + phy4: ethernet-phy@5 { + reg = <5>; + coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + + phy5: ethernet-phy@6 { + reg = <6>; + coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + + phy6: ethernet-phy@7 { + reg = <7>; + coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + + phy7: ethernet-phy@8 { + reg = <8>; + coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; +}; + +&mdio1 { + status = "okay"; +}; + +&phy0 { + status = "okay"; +}; + +&phy1 { + status = "okay"; +}; + +&port0 { + phys = <&serdes 0 CU(0)>; + phy-handle = <&phy0>; + phy-mode = "gmii"; + status = "okay"; +}; + +&port1 { + phys = <&serdes 1 CU(1)>; + phy-handle = <&phy1>; + phy-mode = "gmii"; + status = "okay"; +}; + +&port4 { + phys = <&serdes 4 SERDES6G(2)>; + phy-handle = <&phy4>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&port5 { + phys = <&serdes 5 SERDES6G(2)>; + phy-handle = <&phy5>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&port6 { + phys = <&serdes 6 SERDES6G(2)>; + phy-handle = <&phy6>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&port7 { + phys = <&serdes 7 SERDES6G(2)>; + phy-handle = <&phy7>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&serdes { + status = "okay"; +}; + +&sgpio { + pinctrl-0 = <&sgpio_a_pins>, <&sgpio_b_pins>; + pinctrl-names = "default"; + bus-frequency = <8000000>; + /* arbitrary range because all GPIOs are in software mode */ + microchip,sgpio-port-ranges = <0 11>; + status = "okay"; + + sgpio_in: gpio@0 { + ngpios = <128>; + }; + + sgpio_out: gpio@1 { + ngpios = <128>; + }; +}; + +&switch { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts index 3281af90ac6d..3c7e3a7d6f14 100644 --- a/arch/arm/boot/dts/lan966x-pcb8291.dts +++ b/arch/arm/boot/dts/lan966x-pcb8291.dts @@ -35,7 +35,7 @@ function = "fc3_b"; }; - can0_b_pins: can0_b_pins { + can0_b_pins: can0-b-pins { /* RX, TX */ pins = "GPIO_35", "GPIO_36"; function = "can0_b"; diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi index 7d2869648050..3cb02fffe716 100644 --- a/arch/arm/boot/dts/lan966x.dtsi +++ b/arch/arm/boot/dts/lan966x.dtsi @@ -84,6 +84,68 @@ #size-cells = <1>; ranges; + switch: switch@e0000000 { + compatible = "microchip,lan966x-switch"; + reg = <0xe0000000 0x0100000>, + <0xe2000000 0x0800000>; + reg-names = "cpu", "gcb"; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "xtr", "fdma", "ana", "ptp", + "ptp-ext"; + resets = <&reset 0>; + reset-names = "switch"; + status = "disabled"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + port4: port@4 { + reg = <4>; + status = "disabled"; + }; + + port5: port@5 { + reg = <5>; + status = "disabled"; + }; + + port6: port@6 { + reg = <6>; + status = "disabled"; + }; + + port7: port@7 { + reg = <7>; + status = "disabled"; + }; + }; + }; + flx0: flexcom@e0040000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xe0040000 0x100>; @@ -92,6 +154,47 @@ #size-cells = <1>; ranges = <0x0 0xe0040000 0x800>; status = "disabled"; + + usart0: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>, + <&dma0 AT91_XDMAC_DT_PERID(2)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "usart"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi0: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>, + <&dma0 AT91_XDMAC_DT_PERID(2)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>, + <&dma0 AT91_XDMAC_DT_PERID(2)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; flx1: flexcom@e0044000 { @@ -102,6 +205,47 @@ #size-cells = <1>; ranges = <0x0 0xe0044000 0x800>; status = "disabled"; + + usart1: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>, + <&dma0 AT91_XDMAC_DT_PERID(4)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "usart"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi1: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>, + <&dma0 AT91_XDMAC_DT_PERID(4)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>, + <&dma0 AT91_XDMAC_DT_PERID(4)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; trng: rng@e0048000 { @@ -114,9 +258,9 @@ compatible = "atmel,at91sam9g46-aes"; reg = <0xe004c000 0x100>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(13)>, - <&dma0 AT91_XDMAC_DT_PERID(12)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>, + <&dma0 AT91_XDMAC_DT_PERID(13)>; + dma-names = "tx", "rx"; clocks = <&nic_clk>; clock-names = "aes_clk"; }; @@ -129,6 +273,47 @@ #size-cells = <1>; ranges = <0x0 0xe0060000 0x800>; status = "disabled"; + + usart2: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, + <&dma0 AT91_XDMAC_DT_PERID(6)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "usart"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi2: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, + <&dma0 AT91_XDMAC_DT_PERID(6)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, + <&dma0 AT91_XDMAC_DT_PERID(6)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; flx3: flexcom@e0064000 { @@ -144,11 +329,42 @@ compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>, + <&dma0 AT91_XDMAC_DT_PERID(8)>; + dma-names = "tx", "rx"; clocks = <&nic_clk>; clock-names = "usart"; atmel,fifo-size = <32>; status = "disabled"; }; + + spi3: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>, + <&dma0 AT91_XDMAC_DT_PERID(8)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>, + <&dma0 AT91_XDMAC_DT_PERID(8)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; dma0: dma-controller@e0068000 { @@ -178,6 +394,47 @@ #size-cells = <1>; ranges = <0x0 0xe0070000 0x800>; status = "disabled"; + + usart4: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>, + <&dma0 AT91_XDMAC_DT_PERID(10)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "usart"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi4: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>, + <&dma0 AT91_XDMAC_DT_PERID(10)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>, + <&dma0 AT91_XDMAC_DT_PERID(10)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; timer0: timer@e008c000 { @@ -196,6 +453,11 @@ status = "disabled"; }; + cpu_ctrl: syscon@e00c0000 { + compatible = "microchip,lan966x-cpu-syscon", "syscon"; + reg = <0xe00c0000 0x350>; + }; + can0: can@e081c000 { compatible = "bosch,m_can"; reg = <0xe081c000 0xfc>, <0x00100000 0x4000>; @@ -211,10 +473,20 @@ status = "disabled"; }; + reset: reset-controller@e200400c { + compatible = "microchip,lan966x-switch-reset"; + reg = <0xe200400c 0x4>; + reg-names = "gcb"; + #reset-cells = <1>; + cpu-syscon = <&cpu_ctrl>; + }; + gpio: pinctrl@e2004064 { compatible = "microchip,lan966x-pinctrl"; reg = <0xe2004064 0xb4>, <0xe2010024 0x138>; + resets = <&reset 0>; + reset-names = "switch"; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&gpio 0 0 78>; @@ -223,6 +495,81 @@ #interrupt-cells = <2>; }; + mdio0: mdio@e2004118 { + compatible = "microchip,lan966x-miim"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe2004118 0x24>; + clocks = <&sys_clk>; + status = "disabled"; + }; + + mdio1: mdio@e200413c { + compatible = "microchip,lan966x-miim"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe200413c 0x24>, + <0xe2010020 0x4>; + clocks = <&sys_clk>; + status = "disabled"; + + phy0: ethernet-phy@1 { + reg = <1>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + phy1: ethernet-phy@2 { + reg = <2>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + sgpio: gpio@e2004190 { + compatible = "microchip,sparx5-sgpio"; + reg = <0xe2004190 0x118>; + clocks = <&sys_clk>; + resets = <&reset 0>; + reset-names = "switch"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sgpio_in: gpio@0 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <0>; + gpio-controller; + #gpio-cells = <3>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + sgpio_out: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + }; + }; + + hwmon: hwmon@e2010180 { + compatible = "microchip,lan9668-hwmon"; + reg = <0xe2010180 0xc>, + <0xe20042a8 0xc>; + reg-names = "pvt", "fan"; + clocks = <&sys_clk>; + }; + + serdes: serdes@e202c000 { + compatible = "microchip,lan966x-serdes"; + reg = <0xe202c000 0x9c>, + <0xe2004010 0x4>; + #phy-cells = <2>; + status = "disabled"; + }; + gic: interrupt-controller@e8c11000 { compatible = "arm,gic-400", "arm,cortex-a7-gic"; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts index 2a0a98fe67f0..3240c67e0c39 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts @@ -11,3 +11,18 @@ model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit"; compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3"; }; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts index a604d92221a4..c757f0d7781c 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -11,3 +11,18 @@ model = "LogicPD Zoom DM3730 SOM-LV Development Kit"; compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3"; }; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index b56524cc7fe2..9ba0ea4eb48a 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -27,6 +27,8 @@ /* HS USB Host PHY on PORT 1 */ hsusb2_phy: hsusb2_phy { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_reset_pin>; compatible = "usb-nop-xceiv"; reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */ #phy-cells = <0>; @@ -144,6 +146,8 @@ }; &usbhshost { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_pins>; port2-mode = "ehci-phy"; }; @@ -151,10 +155,7 @@ phys = <0 &hsusb2_phy>; }; - &omap3_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb2_pins>; mmc3_pins: pinmux_mm3_pins { pinctrl-single,pins = < @@ -250,8 +251,7 @@ }; &omap3_pmx_wkup { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb2_reset_pin>; + hsusb2_reset_pin: pinmux_hsusb1_reset_pin { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */ @@ -265,21 +265,6 @@ }; }; -&omap3_pmx_core2 { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb2_2_pins>; - hsusb2_2_pins: pinmux_hsusb2_2_pins { - pinctrl-single,pins = < - OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ - OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ - OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ - OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ - OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ - OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ - >; - }; -}; - &uart2 { interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi index b4664ab00256..d3da8b1b473b 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi @@ -118,8 +118,8 @@ gpmc,device-width = <2>; gpmc,wait-pin = <0>; gpmc,burst-length = <4>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <45>; gpmc,cs-wr-off-ns = <45>; diff --git a/arch/arm/boot/dts/ls1021a-iot.dts b/arch/arm/boot/dts/ls1021a-iot.dts new file mode 100644 index 000000000000..66bcdaf4b6f9 --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-iot.dts @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2021-2022 NXP + * + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "LS1021A-IOT Board"; + compatible = "fsl,ls1021a-iot", "fsl,ls1021a"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_3p3v: regulator-3V3 { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_2p5v: regulator-2V5 { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + frame-master; + bitclock-master; + }; + }; +}; + +&can0{ + status = "disabled"; +}; + +&can1{ + status = "disabled"; +}; + +&can2{ + status = "disabled"; +}; + +&can3{ + status = "okay"; +}; + +&dcu { + display = <&display>; + status = "okay"; + + display: display@0 { + bits-per-pixel = <24>; + + display-timings { + native-mode = <&timing0>; + + timing0: mode0 { + clock-frequency = <25000000>; + hactive = <640>; + vactive = <480>; + hback-porch = <80>; + hfront-porch = <80>; + vback-porch = <16>; + vfront-porch = <16>; + hsync-len = <12>; + vsync-len = <2>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; +}; + +&enet0 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&phy3>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet2 { + fixed-link = <0 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&esdhc{ + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + pca9555: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sgtl5000: audio-codec@2a { + #sound-dai-cells=<0x0>; + compatible = "fsl,sgtl5000"; + reg = <0x2a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_2p5v>; + clocks = <&sys_mclk>; + }; + + max1239: adc@35 { + compatible = "maxim,max1239"; + reg = <0x35>; + #io-channel-cells = <1>; + }; + + ina2201: core-monitor@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + ina2202: current-monitor@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + lm75b: thermal-monitor@48 { + compatible = "national,lm75b"; + reg = <0x48>; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&mdio0 { + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + tbi1: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&qspi { + num-cs = <2>; + status = "okay"; + + s25fl128s: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&sai2 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 2e69d6eab4d1..6c88be2a7e8e 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -122,8 +122,8 @@ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; }; - ifc: ifc@1530000 { - compatible = "fsl,ifc", "simple-bus"; + ifc: memory-controller@1530000 { + compatible = "fsl,ifc"; reg = <0x0 0x1530000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -192,7 +192,7 @@ <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - interrupt-map-mask = <0xffffffff 0x0>; + interrupt-map-mask = <0x7 0x0>; }; }; diff --git a/arch/arm/boot/dts/mba6ulx.dtsi b/arch/arm/boot/dts/mba6ulx.dtsi new file mode 100644 index 000000000000..aac42df9ecf6 --- /dev/null +++ b/arch/arm/boot/dts/mba6ulx.dtsi @@ -0,0 +1,569 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/ { + model = "TQ-Systems MBA6ULx Baseboard"; + + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc1; + rtc0 = &rtc0; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = &uart1; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <®_mba6ul_3v3>; + enable-gpios = <&expander_out0 4 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + beeper: beeper { + compatible = "gpio-beeper"; + gpios = <&expander_out1 6 GPIO_ACTIVE_HIGH>; + }; + + gpio_buttons: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_buttons>; + + button1 { + label = "s14"; + linux,code = <KEY_1>; + gpios = <&expander_in0 0 GPIO_ACTIVE_LOW>; + }; + + button2 { + label = "s6"; + linux,code = <KEY_2>; + gpios = <&expander_in0 1 GPIO_ACTIVE_LOW>; + }; + + button3 { + label = "s7"; + linux,code = <KEY_3>; + gpios = <&expander_in0 2 GPIO_ACTIVE_LOW>; + }; + + power-button { + label = "POWER"; + linux,code = <KEY_POWER>; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + status = "okay"; + + led1 { + label = "led1"; + gpios = <&expander_out1 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led2 { + label = "led2"; + gpios = <&expander_out1 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_lcd_pwr: regulator-lcd-pwr { + compatible = "regulator-fixed"; + regulator-name = "lcd-pwr"; + gpio = <&expander_out0 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_mba6ul_3v3: regulator-mba6ul-3v3 { + compatible = "regulator-fixed"; + regulator-name = "supply-mba6ul-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_mba6ul_5v0: regulator-mba6ul-5v0 { + compatible = "regulator-fixed"; + regulator-name = "supply-mba6ul-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_mpcie: regulator-mpcie-3v3 { + compatible = "regulator-fixed"; + regulator-name = "mpcie-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&expander_out0 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + startup-delay-us = <500000>; + vin-supply = <®_mba6ul_3v3>; + }; + + reg_otg2vbus_5v0: regulator-otg2-vbus-5v0 { + compatible = "regulator-fixed"; + gpio = <&expander_out1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "otg2-vbus-supply-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_mpcie>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x6000000>; + linux,cma-default; + }; + }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "imx-audio-tlv320aic32x4"; + ssi-controller = <&sai1>; + audio-codec = <&tlv320aic32x4>; + audio-asrc = <&asrc>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_mba6ul_3v3>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_mba6ul_3v3>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <768000000>; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + num-cs = <1>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + phy-supply = <®_mba6ul_3v3>; + phy-reset-gpios = <&expander_out1 1 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-reset-post-delay = <1>; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_mdc>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + phy-supply = <®_mba6ul_3v3>; + phy-reset-gpios = <&expander_out1 2 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-reset-post-delay = <1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + reg = <0>; + max-speed = <100>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>; + reg = <1>; + max-speed = <100>; + }; + }; +}; + +&i2c4 { + tlv320aic32x4: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&clks IMX6UL_CLK_SAI1>; + clock-names = "mclk"; + ldoin-supply = <®_mba6ul_3v3>; + iov-supply = <®_mba6ul_3v3>; + }; + + jc42: temperature-sensor@19 { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x19>; + }; + + expander_out0: gpio-expander@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + expander_in0: gpio-expander@21 { + compatible = "nxp,pca9554"; + reg = <0x21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_expander_in0>; + interrupt-parent = <&gpio4>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + enet1_int-hog { + gpio-hog; + gpios = <6 0>; + input; + }; + + enet2_int-hog { + gpio-hog; + gpios = <7 0>; + input; + }; + }; + + expander_out1: gpio-expander@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + analog_touch: touchscreen@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio4>; + interrupt-controller; + status = "disabled"; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */ + st,ave-ctrl = <3>; /* 8 sample average control */ + st,fraction-z = <7>; /* 7 length fractional part in z */ + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + st,mod-12b = <1>; /* 12-bit ADC */ + st,ref-sel = <0>; /* internal ADC reference */ + st,sample-time = <4>; /* ADC converstion time: 80 clocks */ + st,settling = <3>; /* 1 ms panel driver settling time */ + st,touch-det-delay = <5>; /* 5 ms touch detect interrupt delay */ + }; + }; + + /* NXP SE97BTP with temperature sensor + eeprom */ + se97b: eeprom@51 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX6UL_CLK_SAI1_SEL>, + <&clks IMX6UL_CLK_SAI1>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <24000000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + /* for DTE mode, add below change */ + /* fsl,dte-mode; */ + /* pinctrl-0 = <&pinctrl_uart6dte>; */ + uart-has-rtscts; + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + rs485-rx-during-tx; + status = "okay"; +}; + +/* otg-port */ +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + power-active-high; + over-current-active-low; + /* we implement only dual role but not a fully featured OTG */ + hnp-disable; + srp-disable; + adp-disable; + dr_mode = "otg"; + status = "okay"; +}; + +/* 7-port usb hub */ +/* id, pwr, oc pins not connected */ +&usbotg2 { + disable-over-current; + vbus-supply = <®_otg2vbus_5v0>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + vmmc-supply = <®_mba6ul_3v3>; + vqmmc-supply = <®_vccsd>; + no-1-8-v; + no-mmc; + no-sdio; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_buttons: buttonsgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x100b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x1b020 + MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x1b020 + MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x1b020 + MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0 0x1b020 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b0a8 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0a0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0a0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b0a8 + >; + }; + + pinctrl_enet2_mdc: enet2mdcgrp { + fsl,pins = < + /* mdio */ + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + >; + }; + + pinctrl_expander_in0: expanderin0grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x1b0b1 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + /* 100 k PD, DSE 120 OHM, SPPEED LO */ + MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x00003050 + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x1b0b1 + MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x1b0b1 + MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x1f0b8 + MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x110b0 + MX6UL_PAD_CSI_DATA01__SAI1_MCLK 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b1 + MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b1 + MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS 0x1b0b1 + MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_uart6dte: uart6dte { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX 0x1b0b1 + MX6UL_PAD_CSI_MCLK__UART6_DTE_RX 0x1b0b1 + MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS 0x1b0b1 + MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x00017059 + MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x0001b0b0 + MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR 0x0001b099 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x00017059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x00017059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x00017059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x00017059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x00017059 + /* WP */ + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 + /* CD */ + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x000170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x000170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x000170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x000170b9 + /* WP */ + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 + /* CD */ + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x000170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x000170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x000170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x000170f9 + /* WP */ + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 + /* CD */ + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 + >; + }; + + pinctrl_wdog1: wdog1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0001b099 + >; + }; +}; diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts index 61ec929ab86e..56ea875c418c 100644 --- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts +++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts @@ -65,7 +65,7 @@ pinctrl-0 = <&spi_nor_pins>; pinctrl-names = "default"; - spi-flash@0 { + flash@0 { compatible = "mxicy,mx25l1606e"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 46984d4c5224..987d792f67ea 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -275,7 +275,9 @@ compatible = "marvell,pdma-1.0"; reg = <0xd4000000 0x10000>; interrupts = <48>; + /* For backwards compatibility: */ #dma-channels = <16>; + dma-channels = <16>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 4776f85d6d5b..ef583cfd3baf 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -564,7 +564,6 @@ clock-names = "jpgdec-smi", "jpgdec"; power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; - mediatek,larb = <&larb2>; iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; }; @@ -577,7 +576,6 @@ clocks = <&imgsys CLK_IMG_VENC>; clock-names = "jpgenc"; power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; - mediatek,larb = <&larb2>; iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>, <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>; }; diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi index bcb0846e29fd..3adab5cd1fef 100644 --- a/arch/arm/boot/dts/mt7623n.dtsi +++ b/arch/arm/boot/dts/mt7623n.dtsi @@ -121,7 +121,6 @@ clock-names = "jpgdec-smi", "jpgdec"; power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; - mediatek,larb = <&larb2>; iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; }; @@ -144,7 +143,6 @@ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>; clocks = <&mmsys CLK_MM_DISP_OVL>; iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>; - mediatek,larb = <&larb0>; }; rdma0: rdma@14008000 { @@ -154,7 +152,6 @@ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>; clocks = <&mmsys CLK_MM_DISP_RDMA>; iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>; - mediatek,larb = <&larb0>; }; wdma@14009000 { @@ -164,7 +161,6 @@ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>; clocks = <&mmsys CLK_MM_DISP_WDMA>; iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>; - mediatek,larb = <&larb0>; }; bls: pwm@1400a000 { @@ -215,7 +211,6 @@ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>; clocks = <&mmsys CLK_MM_DISP_RDMA1>; iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>; - mediatek,larb = <&larb0>; }; dpi0: dpi@14014000 { diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi index 41744cc2bc72..01e1bb7c3c6c 100644 --- a/arch/arm/boot/dts/nspire-classic.dtsi +++ b/arch/arm/boot/dts/nspire-classic.dtsi @@ -17,7 +17,7 @@ &fast_timer { /* compatible = "lsi,zevio-timer"; */ - reg = <0x90010000 0x1000>, <0x900A0010 0x8>; + reg = <0x90010000 0x1000>, <0x900a0010 0x8>; }; &uart { @@ -30,12 +30,12 @@ &timer0 { /* compatible = "lsi,zevio-timer"; */ - reg = <0x900C0000 0x1000>, <0x900A0018 0x8>; + reg = <0x900c0000 0x1000>, <0x900a0018 0x8>; }; &timer1 { compatible = "lsi,zevio-timer"; - reg = <0x900D0000 0x1000>, <0x900A0020 0x8>; + reg = <0x900d0000 0x1000>, <0x900a0020 0x8>; }; &keypad { @@ -66,10 +66,10 @@ #address-cells = <1>; #size-cells = <1>; - intc: interrupt-controller@DC000000 { + intc: interrupt-controller@dc000000 { compatible = "lsi,zevio-intc"; interrupt-controller; - reg = <0xDC000000 0x1000>; + reg = <0xdc000000 0x1000>; #interrupt-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts index 0c16b04e2744..590b7dff6ae5 100644 --- a/arch/arm/boot/dts/nspire-cx.dts +++ b/arch/arm/boot/dts/nspire-cx.dts @@ -92,10 +92,10 @@ #address-cells = <1>; #size-cells = <1>; - intc: interrupt-controller@DC000000 { + intc: interrupt-controller@dc000000 { compatible = "arm,pl190-vic"; interrupt-controller; - reg = <0xDC000000 0x1000>; + reg = <0xdc000000 0x1000>; #interrupt-cells = <1>; }; diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi index 90e033d9141f..bb240e6a3a6f 100644 --- a/arch/arm/boot/dts/nspire.dtsi +++ b/arch/arm/boot/dts/nspire.dtsi @@ -20,9 +20,9 @@ reg = <0x00000000 0x80000>; }; - sram: sram@A4000000 { + sram: sram@a4000000 { device = "memory"; - reg = <0xA4000000 0x20000>; + reg = <0xa4000000 0x20000>; }; timer_clk: timer_clk { @@ -33,12 +33,12 @@ base_clk: base_clk { #clock-cells = <0>; - reg = <0x900B0024 0x4>; + reg = <0x900b0024 0x4>; }; ahb_clk: ahb_clk { #clock-cells = <0>; - reg = <0x900B0024 0x4>; + reg = <0x900b0024 0x4>; clocks = <&base_clk>; }; @@ -71,28 +71,28 @@ #size-cells = <1>; ranges; - spi: spi@A9000000 { - reg = <0xA9000000 0x1000>; + spi: spi@a9000000 { + reg = <0xa9000000 0x1000>; }; - usb0: usb@B0000000 { + usb0: usb@b0000000 { compatible = "lsi,zevio-usb"; - reg = <0xB0000000 0x1000>; + reg = <0xb0000000 0x1000>; interrupts = <8>; usb-phy = <&usb_phy>; vbus-supply = <&vbus_reg>; }; - usb1: usb@B4000000 { - reg = <0xB4000000 0x1000>; + usb1: usb@b4000000 { + reg = <0xb4000000 0x1000>; interrupts = <9>; status = "disabled"; }; - lcd: lcd@C0000000 { + lcd: lcd@c0000000 { compatible = "arm,pl111", "arm,primecell"; - reg = <0xC0000000 0x1000>; + reg = <0xc0000000 0x1000>; interrupts = <21>; /* @@ -105,17 +105,17 @@ clock-names = "clcdclk", "apb_pclk"; }; - adc: adc@C4000000 { - reg = <0xC4000000 0x1000>; + adc: adc@c4000000 { + reg = <0xc4000000 0x1000>; interrupts = <11>; }; - tdes: crypto@C8010000 { - reg = <0xC8010000 0x1000>; + tdes: crypto@c8010000 { + reg = <0xc8010000 0x1000>; }; - sha256: crypto@CC000000 { - reg = <0xCC000000 0x1000>; + sha256: crypto@cc000000 { + reg = <0xcc000000 0x1000>; }; apb@90000000 { @@ -143,16 +143,16 @@ interrupts = <1>; }; - timer0: timer@900C0000 { - reg = <0x900C0000 0x1000>; + timer0: timer@900c0000 { + reg = <0x900c0000 0x1000>; clocks = <&timer_clk>, <&timer_clk>, <&timer_clk>; clock-names = "timer0clk", "timer1clk", "apb_pclk"; }; - timer1: timer@900D0000 { - reg = <0x900D0000 0x1000>; + timer1: timer@900d0000 { + reg = <0x900d0000 0x1000>; interrupts = <19>; clocks = <&timer_clk>, <&timer_clk>, <&timer_clk>; @@ -171,18 +171,18 @@ interrupts = <4>; }; - misc: misc@900A0000 { - reg = <0x900A0000 0x1000>; + misc: misc@900a0000 { + reg = <0x900a0000 0x1000>; }; - pwr: pwr@900B0000 { - reg = <0x900B0000 0x1000>; + pwr: pwr@900b0000 { + reg = <0x900b0000 0x1000>; interrupts = <15>; }; - keypad: input@900E0000 { + keypad: input@900e0000 { compatible = "ti,nspire-keypad"; - reg = <0x900E0000 0x1000>; + reg = <0x900e0000 0x1000>; interrupts = <16>; scan-interval = <1000>; @@ -191,8 +191,8 @@ clocks = <&apb_pclk>; }; - contrast: contrast@900F0000 { - reg = <0x900F0000 0x1000>; + contrast: contrast@900f0000 { + reg = <0x900f0000 0x1000>; }; led: led@90110000 { diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts index eb6eb21cb2a4..d10669fcd527 100644 --- a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts +++ b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts @@ -358,7 +358,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0cs1_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -406,7 +406,7 @@ pinctrl-0 = <&spi3_pins>, <&spi3cs1_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -416,7 +416,7 @@ m25p,fast-read; label = "pnor"; }; - spi-nor@1 { + flash@1 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts index d4ff49939a3d..491606c4f044 100644 --- a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts +++ b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts @@ -135,7 +135,7 @@ pinctrl-0 = <&spi0cs1_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts index 82a104b2a65f..a0c2d7652625 100644 --- a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts +++ b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts @@ -380,7 +380,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0cs1_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -415,7 +415,7 @@ }; }; }; - spi-nor@1 { + flash@1 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -440,7 +440,7 @@ &fiu3 { pinctrl-0 = <&spi3_pins>; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts index 0334641f8829..3dad32834e5e 100644 --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts @@ -67,7 +67,7 @@ &fiu0 { status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -128,7 +128,7 @@ &fiu3 { pinctrl-0 = <&spi3_pins>, <&spi3quad_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -324,7 +324,7 @@ &spi0 { cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; status = "okay"; - Flash@0 { + flash@0 { compatible = "winbond,w25q128", "jedec,spi-nor"; reg = <0x0>; @@ -345,7 +345,7 @@ &spi1 { cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; status = "okay"; - Flash@0 { + flash@0 { compatible = "winbond,w25q128fw", "jedec,spi-nor"; reg = <0x0>; diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts index 767e0ac0df7c..132e702281fc 100644 --- a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts +++ b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts @@ -100,7 +100,7 @@ pinctrl-0 = <&spi0cs1_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -139,7 +139,7 @@ }; }; - spi-nor@1 { + flash@1 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -166,7 +166,7 @@ pinctrl-0 = <&spi3_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index a858ebfa1500..35eced6521ef 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -370,7 +370,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { + ethernet: ethernet@1 { compatible = "usb424,ec00"; reg = <1>; }; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 7e3d8147e2c1..0365f06165e9 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -31,6 +31,8 @@ aliases { display0 = &lcd; display1 = &tv0; + /delete-property/ mmc2; + /delete-property/ mmc3; }; ldo_3v3: fixedregulator { diff --git a/arch/arm/boot/dts/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/omap3430es1-clocks.dtsi index 2ec3628d3315..24adfac26be0 100644 --- a/arch/arm/boot/dts/omap3430es1-clocks.dtsi +++ b/arch/arm/boot/dts/omap3430es1-clocks.dtsi @@ -46,37 +46,61 @@ ti,bit-shift = <2>; }; - d2d_26m_fck: d2d_26m_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&sys_ck>; - reg = <0x0a00>; - ti,bit-shift = <3>; - }; - - fshostusb_fck: fshostusb_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <5>; - }; - - ssi_ssr_gate_fck_3430es1: ssi_ssr_gate_fck_3430es1@a00 { - #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; - clocks = <&corex2_fck>; - ti,bit-shift = <0>; - reg = <0x0a00>; - }; - - ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1@a40 { - #clock-cells = <0>; - compatible = "ti,composite-divider-clock"; - clocks = <&corex2_fck>; - ti,bit-shift = <8>; - reg = <0x0a40>; - ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; + + d2d_26m_fck: clock-d2d-26m-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "d2d_26m_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <3>; + }; + + fshostusb_fck: clock-fshostusb-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "fshostusb_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <5>; + }; + + ssi_ssr_gate_fck_3430es1: clock-ssi-ssr-gate-fck-3430es1 { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "ssi_ssr_gate_fck_3430es1"; + clocks = <&corex2_fck>; + ti,bit-shift = <0>; + }; + }; + + clock@a40 { + compatible = "ti,clksel"; + reg = <0xa40>; + #clock-cells = <2>; + #address-cells = <0>; + + ssi_ssr_div_fck_3430es1: clock-ssi-ssr-div-fck-3430es1 { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clock-output-names = "ssi_ssr_div_fck_3430es1"; + clocks = <&corex2_fck>; + ti,bit-shift = <8>; + ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; + }; + + usb_l4_div_ick: clock-usb-l4-div-ick { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clock-output-names = "usb_l4_div_ick"; + clocks = <&l4_ick>; + ti,bit-shift = <4>; + ti,max-div = <1>; + ti,index-starts-at-one; + }; }; ssi_ssr_fck: ssi_ssr_fck_3430es1 { @@ -93,20 +117,43 @@ clock-div = <2>; }; - hsotgusb_ick_3430es1: hsotgusb_ick_3430es1@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-no-wait-interface-clock"; - clocks = <&core_l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <4>; - }; - - fac_ick: fac_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <8>; + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; + + hsotgusb_ick_3430es1: clock-hsotgusb-ick-3430es1 { + #clock-cells = <0>; + compatible = "ti,omap3-no-wait-interface-clock"; + clock-output-names = "hsotgusb_ick_3430es1"; + clocks = <&core_l3_ick>; + ti,bit-shift = <4>; + }; + + fac_ick: clock-fac-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "fac_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <8>; + }; + + ssi_ick: clock-ssi-ick-3430es1 { + #clock-cells = <0>; + compatible = "ti,omap3-no-wait-interface-clock"; + clock-output-names = "ssi_ick_3430es1"; + clocks = <&ssi_l4_ick>; + ti,bit-shift = <0>; + }; + + usb_l4_gate_ick: clock-usb-l4-gate-ick { + #clock-cells = <0>; + compatible = "ti,composite-interface-clock"; + clock-output-names = "usb_l4_gate_ick"; + clocks = <&l4_ick>; + ti,bit-shift = <5>; + }; }; ssi_l4_ick: ssi_l4_ick { @@ -117,45 +164,26 @@ clock-div = <1>; }; - ssi_ick: ssi_ick_3430es1@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-no-wait-interface-clock"; - clocks = <&ssi_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <0>; - }; - - usb_l4_gate_ick: usb_l4_gate_ick@a10 { - #clock-cells = <0>; - compatible = "ti,composite-interface-clock"; - clocks = <&l4_ick>; - ti,bit-shift = <5>; - reg = <0x0a10>; - }; - - usb_l4_div_ick: usb_l4_div_ick@a40 { - #clock-cells = <0>; - compatible = "ti,composite-divider-clock"; - clocks = <&l4_ick>; - ti,bit-shift = <4>; - ti,max-div = <1>; - reg = <0x0a40>; - ti,index-starts-at-one; - }; - usb_l4_ick: usb_l4_ick { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>; }; - dss1_alwon_fck: dss1_alwon_fck_3430es1@e00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll4_m4x2_ck>; - ti,bit-shift = <0>; - reg = <0x0e00>; - ti,set-rate-parent; + clock@e00 { + compatible = "ti,clksel"; + reg = <0xe00>; + #clock-cells = <2>; + #address-cells = <0>; + + dss1_alwon_fck: clock-dss1-alwon-fck-3430es1 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "dss1_alwon_fck_3430es1"; + clocks = <&dpll4_m4x2_ck>; + ti,bit-shift = <0>; + ti,set-rate-parent; + }; }; dss_ick: dss_ick_3430es1@e10 { diff --git a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi index 21079cdf2663..8374532f20e2 100644 --- a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi @@ -13,45 +13,76 @@ clock-div = <1>; }; - aes1_ick: aes1_ick@a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l4_ick2>; - ti,bit-shift = <3>; - reg = <0x0a14>; - }; + clock@a14 { + compatible = "ti,clksel"; + reg = <0xa14>; + #clock-cells = <2>; + #address-cells = <0>; - rng_ick: rng_ick@a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l4_ick2>; - reg = <0x0a14>; - ti,bit-shift = <2>; - }; + aes1_ick: clock-aes1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "aes1_ick"; + clocks = <&security_l4_ick2>; + ti,bit-shift = <3>; + }; - sha11_ick: sha11_ick@a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l4_ick2>; - reg = <0x0a14>; - ti,bit-shift = <1>; - }; + rng_ick: clock-rng-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "rng_ick"; + clocks = <&security_l4_ick2>; + ti,bit-shift = <2>; + }; - des1_ick: des1_ick@a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l4_ick2>; - reg = <0x0a14>; - ti,bit-shift = <0>; + sha11_ick: clock-sha11-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "sha11_ick"; + clocks = <&security_l4_ick2>; + ti,bit-shift = <1>; + }; + + des1_ick: clock-des1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "des1_ick"; + clocks = <&security_l4_ick2>; + ti,bit-shift = <0>; + }; + + pka_ick: clock-pka-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "pka_ick"; + clocks = <&security_l3_ick>; + ti,bit-shift = <4>; + }; }; - cam_mclk: cam_mclk@f00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll4_m5x2_ck>; - ti,bit-shift = <0>; - reg = <0x0f00>; - ti,set-rate-parent; + /* CM_FCLKEN_CAM */ + clock@f00 { + compatible = "ti,clksel"; + reg = <0xf00>; + #clock-cells = <2>; + #address-cells = <0>; + + cam_mclk: clock-cam-mclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "cam_mclk"; + clocks = <&dpll4_m5x2_ck>; + ti,bit-shift = <0>; + ti,set-rate-parent; + }; + + csi2_96m_fck: clock-csi2-96m-fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "csi2_96m_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <1>; + }; }; cam_ick: cam_ick@f10 { @@ -62,14 +93,6 @@ ti,bit-shift = <0>; }; - csi2_96m_fck: csi2_96m_fck@f00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0f00>; - ti,bit-shift = <1>; - }; - security_l3_ick: security_l3_ick { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -78,44 +101,51 @@ clock-div = <1>; }; - pka_ick: pka_ick@a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l3_ick>; - reg = <0x0a14>; - ti,bit-shift = <4>; - }; + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; - icr_ick: icr_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <29>; - }; + icr_ick: clock-icr-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "icr_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <29>; + }; - des2_ick: des2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <26>; - }; + des2_ick: clock-des2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "des2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <26>; + }; - mspro_ick: mspro_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <23>; - }; + mspro_ick: clock-mspro-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mspro_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <23>; + }; - mailboxes_ick: mailboxes_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <7>; + mailboxes_ick: clock-mailboxes-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mailboxes_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <7>; + }; + + sad2d_ick: clock-sad2d-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "sad2d_ick"; + clocks = <&l3_ick>; + ti,bit-shift = <3>; + }; }; ssi_l4_ick: ssi_l4_ick { @@ -126,20 +156,27 @@ clock-div = <1>; }; - sr1_fck: sr1_fck@c00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&sys_ck>; - reg = <0x0c00>; - ti,bit-shift = <6>; - }; + clock@c00 { + compatible = "ti,clksel"; + reg = <0xc00>; + #clock-cells = <2>; + #address-cells = <0>; - sr2_fck: sr2_fck@c00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&sys_ck>; - reg = <0x0c00>; - ti,bit-shift = <7>; + sr1_fck: clock-sr1-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "sr1_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <6>; + }; + + sr2_fck: clock-sr2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "sr2_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <7>; + }; }; sr_l4_ick: sr_l4_ick { @@ -187,37 +224,45 @@ ti,bit-shift = <0>; }; - modem_fck: modem_fck@a00 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&sys_ck>; - reg = <0x0a00>; - ti,bit-shift = <31>; - }; + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; - sad2d_ick: sad2d_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <3>; - }; + modem_fck: clock-modem-fck { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "modem_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <31>; + }; - mad2d_ick: mad2d_ick@a18 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&l3_ick>; - reg = <0x0a18>; - ti,bit-shift = <3>; + mspro_fck: clock-mspro-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mspro_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <23>; + }; }; - mspro_fck: mspro_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <23>; + /* CM_ICLKEN3_CORE */ + clock@a18 { + compatible = "ti,clksel"; + reg = <0xa18>; + #clock-cells = <2>; + #address-cells = <0>; + + mad2d_ick: clock-mad2d-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mad2d_ick"; + clocks = <&l3_ick>; + ti,bit-shift = <3>; + }; }; + }; &cm_clockdomains { diff --git a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi index 9974d5226971..dcc5cfcd1fe6 100644 --- a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi @@ -133,37 +133,66 @@ ti,bit-shift = <2>; }; - usbtll_ick: usbtll_ick@a18 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a18>; - ti,bit-shift = <2>; + /* CM_ICLKEN3_CORE */ + clock@a18 { + compatible = "ti,clksel"; + reg = <0xa18>; + #clock-cells = <2>; + #address-cells = <0>; + + usbtll_ick: clock-usbtll-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "usbtll_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <2>; + }; }; - mmchs3_ick: mmchs3_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <30>; + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; + + mmchs3_ick: clock-mmchs3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mmchs3_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <30>; + }; }; - mmchs3_fck: mmchs3_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <30>; + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; + + mmchs3_fck: clock-mmchs3-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mmchs3_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <30>; + }; }; - dss1_alwon_fck: dss1_alwon_fck_3430es2@e00 { - #clock-cells = <0>; - compatible = "ti,dss-gate-clock"; - clocks = <&dpll4_m4x2_ck>; - ti,bit-shift = <0>; - reg = <0x0e00>; - ti,set-rate-parent; + clock@e00 { + compatible = "ti,clksel"; + reg = <0xe00>; + #clock-cells = <2>; + #address-cells = <0>; + + dss1_alwon_fck: clock-dss1-alwon-fck-3430es2 { + #clock-cells = <0>; + compatible = "ti,dss-gate-clock"; + clock-output-names = "dss1_alwon_fck_3430es2"; + clocks = <&dpll4_m4x2_ck>; + ti,bit-shift = <0>; + ti,set-rate-parent; + }; }; dss_ick: dss_ick_3430es2@e10 { diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi index 4e9cc9003594..c5fdb2bd765d 100644 --- a/arch/arm/boot/dts/omap36xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi @@ -58,12 +58,19 @@ ti,set-bit-to-disable; }; - uart4_fck: uart4_fck@1000 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&per_48m_fck>; + clock@1000 { + compatible = "ti,clksel"; reg = <0x1000>; - ti,bit-shift = <18>; + #clock-cells = <2>; + #address-cells = <0>; + + uart4_fck: clock-uart4-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "uart4_fck"; + clocks = <&per_48m_fck>; + ti,bit-shift = <18>; + }; }; }; diff --git a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi index 945537aee3ca..c94eb86d3da7 100644 --- a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi @@ -5,21 +5,35 @@ * Copyright (C) 2013 Texas Instruments, Inc. */ &cm_clocks { - ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2@a00 { - #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; - clocks = <&corex2_fck>; - ti,bit-shift = <0>; - reg = <0x0a00>; - }; - - ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2@a40 { - #clock-cells = <0>; - compatible = "ti,composite-divider-clock"; - clocks = <&corex2_fck>; - ti,bit-shift = <8>; - reg = <0x0a40>; - ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; + + ssi_ssr_gate_fck_3430es2: clock-ssi-ssr-gate-fck-3430es2 { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "ssi_ssr_gate_fck_3430es2"; + clocks = <&corex2_fck>; + ti,bit-shift = <0>; + }; + }; + + clock@a40 { + compatible = "ti,clksel"; + reg = <0xa40>; + #clock-cells = <2>; + #address-cells = <0>; + + ssi_ssr_div_fck_3430es2: clock-ssi-ssr-div-fck-3430es2 { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clock-output-names = "ssi_ssr_div_fck_3430es2"; + clocks = <&corex2_fck>; + ti,bit-shift = <8>; + ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; + }; }; ssi_ssr_fck: ssi_ssr_fck_3430es2 { @@ -36,12 +50,27 @@ clock-div = <2>; }; - hsotgusb_ick_3430es2: hsotgusb_ick_3430es2@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-hsotgusb-interface-clock"; - clocks = <&core_l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <4>; + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; + + hsotgusb_ick_3430es2: clock-hsotgusb-ick-3430es2 { + #clock-cells = <0>; + compatible = "ti,omap3-hsotgusb-interface-clock"; + clock-output-names = "hsotgusb_ick_3430es2"; + clocks = <&core_l3_ick>; + ti,bit-shift = <4>; + }; + + ssi_ick: clock-ssi-ick-3430es2 { + #clock-cells = <0>; + compatible = "ti,omap3-ssi-interface-clock"; + clock-output-names = "ssi_ick_3430es2"; + clocks = <&ssi_l4_ick>; + ti,bit-shift = <0>; + }; }; ssi_l4_ick: ssi_l4_ick { @@ -52,20 +81,19 @@ clock-div = <1>; }; - ssi_ick: ssi_ick_3430es2@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-ssi-interface-clock"; - clocks = <&ssi_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <0>; - }; + clock@c00 { + compatible = "ti,clksel"; + reg = <0xc00>; + #clock-cells = <2>; + #address-cells = <0>; - usim_gate_fck: usim_gate_fck@c00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&omap_96m_fck>; - ti,bit-shift = <9>; - reg = <0x0c00>; + usim_gate_fck: clock-usim-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "usim_gate_fck"; + clocks = <&omap_96m_fck>; + ti,bit-shift = <9>; + }; }; sys_d2_ck: sys_d2_ck { @@ -140,13 +168,20 @@ clock-div = <20>; }; - usim_mux_fck: usim_mux_fck@c40 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>; - ti,bit-shift = <3>; - reg = <0x0c40>; - ti,index-starts-at-one; + clock@c40 { + compatible = "ti,clksel"; + reg = <0xc40>; + #clock-cells = <2>; + #address-cells = <0>; + + usim_mux_fck: clock-usim-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "usim_mux_fck"; + clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>; + ti,bit-shift = <3>; + ti,index-starts-at-one; + }; }; usim_fck: usim_fck { @@ -155,12 +190,19 @@ clocks = <&usim_gate_fck>, <&usim_mux_fck>; }; - usim_ick: usim_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <9>; + clock@c10 { + compatible = "ti,clksel"; + reg = <0xc10>; + #clock-cells = <2>; + #address-cells = <0>; + + usim_ick: clock-usim-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "usim_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <9>; + }; }; }; diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi index 0656c32439d2..2e13ca11ceea 100644 --- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi +++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi @@ -78,12 +78,35 @@ }; &scm_clocks { - mcbsp5_mux_fck: mcbsp5_mux_fck@68 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&core_96m_fck>, <&mcbsp_clks>; - ti,bit-shift = <4>; + /* CONTROL_DEVCONF1 */ + clock@68 { + compatible = "ti,clksel"; reg = <0x68>; + #clock-cells = <2>; + #address-cells = <0>; + + mcbsp5_mux_fck: clock-mcbsp5-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "mcbsp5_mux_fck"; + clocks = <&core_96m_fck>, <&mcbsp_clks>; + ti,bit-shift = <4>; + }; + + mcbsp3_mux_fck: clock-mcbsp3-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "mcbsp3_mux_fck"; + clocks = <&per_96m_fck>, <&mcbsp_clks>; + }; + + mcbsp4_mux_fck: clock-mcbsp4-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "mcbsp4_mux_fck"; + clocks = <&per_96m_fck>, <&mcbsp_clks>; + ti,bit-shift = <2>; + }; }; mcbsp5_fck: mcbsp5_fck { @@ -92,12 +115,28 @@ clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>; }; - mcbsp1_mux_fck: mcbsp1_mux_fck@4 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&core_96m_fck>, <&mcbsp_clks>; - ti,bit-shift = <2>; - reg = <0x04>; + /* CONTROL_DEVCONF0 */ + clock@4 { + compatible = "ti,clksel"; + reg = <0x4>; + #clock-cells = <2>; + #address-cells = <0>; + + mcbsp1_mux_fck: clock-mcbsp1-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "mcbsp1_mux_fck"; + clocks = <&core_96m_fck>, <&mcbsp_clks>; + ti,bit-shift = <2>; + }; + + mcbsp2_mux_fck: clock-mcbsp2-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "mcbsp2_mux_fck"; + clocks = <&per_96m_fck>, <&mcbsp_clks>; + ti,bit-shift = <6>; + }; }; mcbsp1_fck: mcbsp1_fck { @@ -106,41 +145,18 @@ clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>; }; - mcbsp2_mux_fck: mcbsp2_mux_fck@4 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&per_96m_fck>, <&mcbsp_clks>; - ti,bit-shift = <6>; - reg = <0x04>; - }; - mcbsp2_fck: mcbsp2_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>; }; - mcbsp3_mux_fck: mcbsp3_mux_fck@68 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&per_96m_fck>, <&mcbsp_clks>; - reg = <0x68>; - }; - mcbsp3_fck: mcbsp3_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>; }; - mcbsp4_mux_fck: mcbsp4_mux_fck@68 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&per_96m_fck>, <&mcbsp_clks>; - ti,bit-shift = <2>; - reg = <0x68>; - }; - mcbsp4_fck: mcbsp4_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; @@ -238,14 +254,87 @@ reg = <0x0d00>, <0x0d20>, <0x0d40>, <0x0d30>; }; - dpll3_m3_ck: dpll3_m3_ck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll3_ck>; - ti,bit-shift = <16>; - ti,max-div = <31>; + /* CM_CLKSEL1_EMU */ + clock@1140 { + compatible = "ti,clksel"; reg = <0x1140>; - ti,index-starts-at-one; + #clock-cells = <2>; + #address-cells = <0>; + + dpll3_m3_ck: clock-dpll3-m3 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dpll3_m3_ck"; + clocks = <&dpll3_ck>; + ti,bit-shift = <16>; + ti,max-div = <31>; + ti,index-starts-at-one; + }; + + dpll4_m6_ck: clock-dpll4-m6 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dpll4_m6_ck"; + clocks = <&dpll4_ck>; + ti,bit-shift = <24>; + ti,max-div = <63>; + ti,index-starts-at-one; + }; + + emu_src_mux_ck: clock-emu-src-mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "emu_src_mux_ck"; + clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>; + }; + + pclk_fck: clock-pclk-fck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "pclk_fck"; + clocks = <&emu_src_ck>; + ti,bit-shift = <8>; + ti,max-div = <7>; + ti,index-starts-at-one; + }; + + pclkx2_fck: clock-pclkx2-fck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "pclkx2_fck"; + clocks = <&emu_src_ck>; + ti,bit-shift = <6>; + ti,max-div = <3>; + ti,index-starts-at-one; + }; + + atclk_fck: clock-atclk-fck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "atclk_fck"; + clocks = <&emu_src_ck>; + ti,bit-shift = <4>; + ti,max-div = <3>; + ti,index-starts-at-one; + }; + + traceclk_src_fck: clock-traceclk-src-fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "traceclk_src_fck"; + clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>; + ti,bit-shift = <2>; + }; + + traceclk_fck: clock-traceclk-fck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "traceclk_fck"; + clocks = <&traceclk_src_fck>; + ti,bit-shift = <11>; + ti,max-div = <7>; + ti,index-starts-at-one; + }; }; dpll3_m3x2_mul_ck: dpll3_m3x2_mul_ck { @@ -285,16 +374,6 @@ clock-frequency = <0x0>; }; - dpll3_m2_ck: dpll3_m2_ck@d40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll3_ck>; - ti,bit-shift = <27>; - ti,max-div = <31>; - reg = <0x0d40>; - ti,index-starts-at-one; - }; - core_ck: core_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -345,22 +424,73 @@ clock-div = <1>; }; - omap_96m_fck: omap_96m_fck@d40 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&cm_96m_fck>, <&sys_ck>; - ti,bit-shift = <6>; - reg = <0x0d40>; - }; - - dpll4_m3_ck: dpll4_m3_ck@e40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll4_ck>; - ti,bit-shift = <8>; - ti,max-div = <32>; - reg = <0x0e40>; - ti,index-starts-at-one; + /* CM_CLKSEL1_PLL */ + clock@d40 { + compatible = "ti,clksel"; + reg = <0xd40>; + #clock-cells = <2>; + #address-cells = <0>; + + dpll3_m2_ck: clock-dpll3-m2 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dpll3_m2_ck"; + clocks = <&dpll3_ck>; + ti,bit-shift = <27>; + ti,max-div = <31>; + ti,index-starts-at-one; + }; + + omap_96m_fck: clock-omap-96m-fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "omap_96m_fck"; + clocks = <&cm_96m_fck>, <&sys_ck>; + ti,bit-shift = <6>; + }; + + omap_54m_fck: clock-omap-54m-fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "omap_54m_fck"; + clocks = <&dpll4_m3x2_ck>, <&sys_altclk>; + ti,bit-shift = <5>; + }; + + omap_48m_fck: clock-omap-48m-fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "omap_48m_fck"; + clocks = <&cm_96m_d2_fck>, <&sys_altclk>; + ti,bit-shift = <3>; + }; + }; + + /* CM_CLKSEL_DSS */ + clock@e40 { + compatible = "ti,clksel"; + reg = <0xe40>; + #clock-cells = <2>; + #address-cells = <0>; + + dpll4_m3_ck: clock-dpll4-m3 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dpll4_m3_ck"; + clocks = <&dpll4_ck>; + ti,bit-shift = <8>; + ti,max-div = <32>; + ti,index-starts-at-one; + }; + + dpll4_m4_ck: clock-dpll4-m4 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dpll4_m4_ck"; + clocks = <&dpll4_ck>; + ti,max-div = <16>; + ti,index-starts-at-one; + }; }; dpll4_m3x2_mul_ck: dpll4_m3x2_mul_ck { @@ -380,14 +510,6 @@ ti,set-bit-to-disable; }; - omap_54m_fck: omap_54m_fck@d40 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dpll4_m3x2_ck>, <&sys_altclk>; - ti,bit-shift = <5>; - reg = <0x0d40>; - }; - cm_96m_d2_fck: cm_96m_d2_fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -396,14 +518,6 @@ clock-div = <2>; }; - omap_48m_fck: omap_48m_fck@d40 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&cm_96m_d2_fck>, <&sys_altclk>; - ti,bit-shift = <3>; - reg = <0x0d40>; - }; - omap_12m_fck: omap_12m_fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -412,15 +526,6 @@ clock-div = <4>; }; - dpll4_m4_ck: dpll4_m4_ck@e40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll4_ck>; - ti,max-div = <16>; - reg = <0x0e40>; - ti,index-starts-at-one; - }; - dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck { #clock-cells = <0>; compatible = "ti,fixed-factor-clock"; @@ -468,16 +573,6 @@ ti,set-rate-parent; }; - dpll4_m6_ck: dpll4_m6_ck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll4_ck>; - ti,bit-shift = <24>; - ti,max-div = <63>; - reg = <0x1140>; - ti,index-starts-at-one; - }; - dpll4_m6x2_mul_ck: dpll4_m6x2_mul_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -503,19 +598,37 @@ clock-div = <1>; }; - clkout2_src_gate_ck: clkout2_src_gate_ck@d70 { - #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; - clocks = <&core_ck>; - ti,bit-shift = <7>; - reg = <0x0d70>; - }; - - clkout2_src_mux_ck: clkout2_src_mux_ck@d70 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>; - reg = <0x0d70>; + /* CM_CLKOUT_CTRL */ + clock@d70 { + compatible = "ti,clksel"; + reg = <0xd70>; + #clock-cells = <2>; + #address-cells = <0>; + + clkout2_src_gate_ck: clock-clkout2-src-gate { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "clkout2_src_gate_ck"; + clocks = <&core_ck>; + ti,bit-shift = <7>; + }; + + clkout2_src_mux_ck: clock-clkout2-src-mux { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "clkout2_src_mux_ck"; + clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>; + }; + + sys_clkout2: clock-sys-clkout2 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "sys_clkout2"; + clocks = <&clkout2_src_ck>; + ti,bit-shift = <3>; + ti,max-div = <64>; + ti,index-power-of-two; + }; }; clkout2_src_ck: clkout2_src_ck { @@ -524,16 +637,6 @@ clocks = <&clkout2_src_gate_ck>, <&clkout2_src_mux_ck>; }; - sys_clkout2: sys_clkout2@d70 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&clkout2_src_ck>; - ti,bit-shift = <3>; - ti,max-div = <64>; - reg = <0x0d70>; - ti,index-power-of-two; - }; - mpu_ck: mpu_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -558,49 +661,208 @@ clock-div = <1>; }; - l3_ick: l3_ick@a40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&core_ck>; - ti,max-div = <3>; - reg = <0x0a40>; - ti,index-starts-at-one; - }; - - l4_ick: l4_ick@a40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&l3_ick>; - ti,bit-shift = <2>; - ti,max-div = <3>; - reg = <0x0a40>; - ti,index-starts-at-one; - }; - - rm_ick: rm_ick@c40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&l4_ick>; - ti,bit-shift = <1>; - ti,max-div = <3>; - reg = <0x0c40>; - ti,index-starts-at-one; - }; - - gpt10_gate_fck: gpt10_gate_fck@a00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <11>; - reg = <0x0a00>; - }; - - gpt10_mux_fck: gpt10_mux_fck@a40 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <6>; - reg = <0x0a40>; + /* CM_CLKSEL_CORE */ + clock@a40 { + compatible = "ti,clksel"; + reg = <0xa40>; + #clock-cells = <2>; + #address-cells = <0>; + + l3_ick: clock-l3-ick { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "l3_ick"; + clocks = <&core_ck>; + ti,max-div = <3>; + ti,index-starts-at-one; + }; + + l4_ick: clock-l4-ick { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "l4_ick"; + clocks = <&l3_ick>; + ti,bit-shift = <2>; + ti,max-div = <3>; + ti,index-starts-at-one; + }; + + gpt10_mux_fck: clock-gpt10-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt10_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <6>; + }; + + gpt11_mux_fck: clock-gpt11-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt11_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <7>; + }; + }; + + /* CM_CLKSEL_WKUP */ + clock@c40 { + compatible = "ti,clksel"; + reg = <0xc40>; + #clock-cells = <2>; + #address-cells = <0>; + + rm_ick: clock-rm-ick { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "rm_ick"; + clocks = <&l4_ick>; + ti,bit-shift = <1>; + ti,max-div = <3>; + ti,index-starts-at-one; + }; + + gpt1_mux_fck: clock-gpt1-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt1_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + }; + }; + + /* CM_FCLKEN1_CORE */ + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; + + gpt10_gate_fck: clock-gpt10-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt10_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <11>; + }; + + gpt11_gate_fck: clock-gpt11-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt11_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <12>; + }; + + mmchs2_fck: clock-mmchs2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mmchs2_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <25>; + }; + + mmchs1_fck: clock-mmchs1-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mmchs1_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <24>; + }; + + i2c3_fck: clock-i2c3-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "i2c3_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <17>; + }; + + i2c2_fck: clock-i2c2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "i2c2_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <16>; + }; + + i2c1_fck: clock-i2c1-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "i2c1_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <15>; + }; + + mcbsp5_gate_fck: clock-mcbsp5-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "mcbsp5_gate_fck"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <10>; + }; + + mcbsp1_gate_fck: clock-mcbsp1-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "mcbsp1_gate_fck"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <9>; + }; + + mcspi4_fck: clock-mcspi4-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mcspi4_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <21>; + }; + + mcspi3_fck: clock-mcspi3-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mcspi3_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <20>; + }; + + mcspi2_fck: clock-mcspi2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mcspi2_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <19>; + }; + + mcspi1_fck: clock-mcspi1-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mcspi1_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <18>; + }; + + uart2_fck: clock-uart2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "uart2_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <14>; + }; + + uart1_fck: clock-uart1-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "uart1_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <13>; + }; + + hdq_fck: clock-hdq-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "hdq_fck"; + clocks = <&core_12m_fck>; + ti,bit-shift = <22>; + }; }; gpt10_fck: gpt10_fck { @@ -609,22 +871,6 @@ clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>; }; - gpt11_gate_fck: gpt11_gate_fck@a00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <12>; - reg = <0x0a00>; - }; - - gpt11_mux_fck: gpt11_mux_fck@a40 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <7>; - reg = <0x0a40>; - }; - gpt11_fck: gpt11_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; @@ -639,62 +885,6 @@ clock-div = <1>; }; - mmchs2_fck: mmchs2_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <25>; - }; - - mmchs1_fck: mmchs1_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <24>; - }; - - i2c3_fck: i2c3_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <17>; - }; - - i2c2_fck: i2c2_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <16>; - }; - - i2c1_fck: i2c1_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <15>; - }; - - mcbsp5_gate_fck: mcbsp5_gate_fck@a00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&mcbsp_clks>; - ti,bit-shift = <10>; - reg = <0x0a00>; - }; - - mcbsp1_gate_fck: mcbsp1_gate_fck@a00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&mcbsp_clks>; - ti,bit-shift = <9>; - reg = <0x0a00>; - }; - core_48m_fck: core_48m_fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -703,54 +893,6 @@ clock-div = <1>; }; - mcspi4_fck: mcspi4_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <21>; - }; - - mcspi3_fck: mcspi3_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <20>; - }; - - mcspi2_fck: mcspi2_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <19>; - }; - - mcspi1_fck: mcspi1_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <18>; - }; - - uart2_fck: uart2_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <14>; - }; - - uart1_fck: uart1_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <13>; - }; - core_12m_fck: core_12m_fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -759,14 +901,6 @@ clock-div = <1>; }; - hdq_fck: hdq_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_12m_fck>; - reg = <0x0a00>; - ti,bit-shift = <22>; - }; - core_l3_ick: core_l3_ick { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -775,12 +909,172 @@ clock-div = <1>; }; - sdrc_ick: sdrc_ick@a10 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <1>; + /* CM_ICLKEN1_CORE */ + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; + + sdrc_ick: clock-sdrc-ick { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "sdrc_ick"; + clocks = <&core_l3_ick>; + ti,bit-shift = <1>; + }; + + mmchs2_ick: clock-mmchs2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mmchs2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <25>; + }; + + mmchs1_ick: clock-mmchs1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mmchs1_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <24>; + }; + + hdq_ick: clock-hdq-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "hdq_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <22>; + }; + + mcspi4_ick: clock-mcspi4-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcspi4_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <21>; + }; + + mcspi3_ick: clock-mcspi3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcspi3_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <20>; + }; + + mcspi2_ick: clock-mcspi2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcspi2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <19>; + }; + + mcspi1_ick: clock-mcspi1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcspi1_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <18>; + }; + + i2c3_ick: clock-i2c3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "i2c3_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <17>; + }; + + i2c2_ick: clock-i2c2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "i2c2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <16>; + }; + + i2c1_ick: clock-i2c1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "i2c1_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <15>; + }; + + uart2_ick: clock-uart2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "uart2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <14>; + }; + + uart1_ick: clock-uart1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "uart1_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <13>; + }; + + gpt11_ick: clock-gpt11-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt11_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <12>; + }; + + gpt10_ick: clock-gpt10-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt10_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <11>; + }; + + mcbsp5_ick: clock-mcbsp5-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcbsp5_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <10>; + }; + + mcbsp1_ick: clock-mcbsp1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcbsp1_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <9>; + }; + + omapctrl_ick: clock-omapctrl-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "omapctrl_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <6>; + }; + + aes2_ick: clock-aes2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "aes2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <28>; + }; + + sha12_ick: clock-sha12-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "sha12_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <27>; + }; }; gpmc_fck: gpmc_fck { @@ -799,164 +1093,36 @@ clock-div = <1>; }; - mmchs2_ick: mmchs2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <25>; - }; - - mmchs1_ick: mmchs1_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <24>; - }; - - hdq_ick: hdq_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <22>; - }; - - mcspi4_ick: mcspi4_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <21>; - }; - - mcspi3_ick: mcspi3_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <20>; - }; - - mcspi2_ick: mcspi2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <19>; - }; - - mcspi1_ick: mcspi1_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <18>; - }; - - i2c3_ick: i2c3_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <17>; - }; - - i2c2_ick: i2c2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <16>; - }; - - i2c1_ick: i2c1_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <15>; - }; - - uart2_ick: uart2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <14>; - }; - - uart1_ick: uart1_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <13>; - }; - - gpt11_ick: gpt11_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <12>; - }; - - gpt10_ick: gpt10_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <11>; - }; - - mcbsp5_ick: mcbsp5_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <10>; - }; - - mcbsp1_ick: mcbsp1_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <9>; - }; - - omapctrl_ick: omapctrl_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <6>; - }; - - dss_tv_fck: dss_tv_fck@e00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&omap_54m_fck>; - reg = <0x0e00>; - ti,bit-shift = <2>; - }; - - dss_96m_fck: dss_96m_fck@e00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&omap_96m_fck>; - reg = <0x0e00>; - ti,bit-shift = <2>; - }; - - dss2_alwon_fck: dss2_alwon_fck@e00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_ck>; - reg = <0x0e00>; - ti,bit-shift = <1>; + /* CM_FCLKEN_DSS */ + clock@e00 { + compatible = "ti,clksel"; + reg = <0xe00>; + #clock-cells = <2>; + #address-cells = <0>; + + dss_tv_fck: clock-dss-tv-fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "dss_tv_fck"; + clocks = <&omap_54m_fck>; + ti,bit-shift = <2>; + }; + + dss_96m_fck: clock-dss-96m-fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "dss_96m_fck"; + clocks = <&omap_96m_fck>; + ti,bit-shift = <2>; + }; + + dss2_alwon_fck: clock-dss2-alwon-fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "dss2_alwon_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <1>; + }; }; dummy_ck: dummy_ck { @@ -965,19 +1131,36 @@ clock-frequency = <0>; }; - gpt1_gate_fck: gpt1_gate_fck@c00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <0>; - reg = <0x0c00>; - }; - - gpt1_mux_fck: gpt1_mux_fck@c40 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - reg = <0x0c40>; + /* CM_FCLKEN_WKUP */ + clock@c00 { + compatible = "ti,clksel"; + reg = <0xc00>; + #clock-cells = <2>; + #address-cells = <0>; + + gpt1_gate_fck: clock-gpt1-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt1_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <0>; + }; + + gpio1_dbck: clock-gpio1-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio1_dbck"; + clocks = <&wkup_32k_fck>; + ti,bit-shift = <3>; + }; + + wdt2_fck: clock-wdt2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "wdt2_fck"; + clocks = <&wkup_32k_fck>; + ti,bit-shift = <5>; + }; }; gpt1_fck: gpt1_fck { @@ -986,14 +1169,6 @@ clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>; }; - aes2_ick: aes2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - ti,bit-shift = <28>; - reg = <0x0a10>; - }; - wkup_32k_fck: wkup_32k_fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -1002,76 +1177,60 @@ clock-div = <1>; }; - gpio1_dbck: gpio1_dbck@c00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&wkup_32k_fck>; - reg = <0x0c00>; - ti,bit-shift = <3>; - }; - - sha12_ick: sha12_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <27>; - }; - - wdt2_fck: wdt2_fck@c00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&wkup_32k_fck>; - reg = <0x0c00>; - ti,bit-shift = <5>; - }; - - wdt2_ick: wdt2_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <5>; - }; - - wdt1_ick: wdt1_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <4>; - }; - - gpio1_ick: gpio1_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <3>; - }; - - omap_32ksync_ick: omap_32ksync_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <2>; - }; - - gpt12_ick: gpt12_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <1>; - }; - - gpt1_ick: gpt1_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <0>; + /* CM_ICLKEN_WKUP */ + clock@c10 { + compatible = "ti,clksel"; + reg = <0xc10>; + #clock-cells = <2>; + #address-cells = <0>; + + wdt2_ick: clock-wdt2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "wdt2_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <5>; + }; + + wdt1_ick: clock-wdt1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "wdt1_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <4>; + }; + + gpio1_ick: clock-gpio1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio1_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <3>; + }; + + omap_32ksync_ick: clock-omap-32ksync-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "omap_32ksync_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <2>; + }; + + gpt12_ick: clock-gpt12-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt12_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <1>; + }; + + gpt1_ick: clock-gpt1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt1_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <0>; + }; }; per_96m_fck: per_96m_fck { @@ -1090,27 +1249,227 @@ clock-div = <1>; }; - uart3_fck: uart3_fck@1000 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&per_48m_fck>; - reg = <0x1000>; - ti,bit-shift = <11>; - }; - - gpt2_gate_fck: gpt2_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <3>; + /* CM_FCLKEN_PER */ + clock@1000 { + compatible = "ti,clksel"; reg = <0x1000>; - }; - - gpt2_mux_fck: gpt2_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; + #clock-cells = <2>; + #address-cells = <0>; + + uart3_fck: clock-uart3-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "uart3_fck"; + clocks = <&per_48m_fck>; + ti,bit-shift = <11>; + }; + + gpt2_gate_fck: clock-gpt2-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt2_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <3>; + }; + + gpt3_gate_fck: clock-gpt3-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt3_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <4>; + }; + + gpt4_gate_fck: clock-gpt4-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt4_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <5>; + }; + + gpt5_gate_fck: clock-gpt5-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt5_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <6>; + }; + + gpt6_gate_fck: clock-gpt6-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt6_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <7>; + }; + + gpt7_gate_fck: clock-gpt7-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt7_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <8>; + }; + + gpt8_gate_fck: clock-gpt8-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt8_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <9>; + }; + + gpt9_gate_fck: clock-gpt9-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt9_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <10>; + }; + + gpio6_dbck: clock-gpio6-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio6_dbck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <17>; + }; + + gpio5_dbck: clock-gpio5-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio5_dbck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <16>; + }; + + gpio4_dbck: clock-gpio4-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio4_dbck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <15>; + }; + + gpio3_dbck: clock-gpio3-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio3_dbck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <14>; + }; + + gpio2_dbck: clock-gpio2-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio2_dbck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <13>; + }; + + wdt3_fck: clock-wdt3-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "wdt3_fck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <12>; + }; + + mcbsp2_gate_fck: clock-mcbsp2-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "mcbsp2_gate_fck"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <0>; + }; + + mcbsp3_gate_fck: clock-mcbsp3-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "mcbsp3_gate_fck"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <1>; + }; + + mcbsp4_gate_fck: clock-mcbsp4-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "mcbsp4_gate_fck"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <2>; + }; + }; + + /* CM_CLKSEL_PER */ + clock@1040 { + compatible = "ti,clksel"; reg = <0x1040>; + #clock-cells = <2>; + #address-cells = <0>; + + gpt2_mux_fck: clock-gpt2-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt2_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + }; + + gpt3_mux_fck: clock-gpt3-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt3_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <1>; + }; + + gpt4_mux_fck: clock-gpt4-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt4_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <2>; + }; + + gpt5_mux_fck: clock-gpt5-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt5_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <3>; + }; + + gpt6_mux_fck: clock-gpt6-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt6_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <4>; + }; + + gpt7_mux_fck: clock-gpt7-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt7_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <5>; + }; + + gpt8_mux_fck: clock-gpt8-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt8_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <6>; + }; + + gpt9_mux_fck: clock-gpt9-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt9_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <7>; + }; }; gpt2_fck: gpt2_fck { @@ -1119,154 +1478,42 @@ clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>; }; - gpt3_gate_fck: gpt3_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <4>; - reg = <0x1000>; - }; - - gpt3_mux_fck: gpt3_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <1>; - reg = <0x1040>; - }; - gpt3_fck: gpt3_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>; }; - gpt4_gate_fck: gpt4_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <5>; - reg = <0x1000>; - }; - - gpt4_mux_fck: gpt4_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <2>; - reg = <0x1040>; - }; - gpt4_fck: gpt4_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>; }; - gpt5_gate_fck: gpt5_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <6>; - reg = <0x1000>; - }; - - gpt5_mux_fck: gpt5_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <3>; - reg = <0x1040>; - }; - gpt5_fck: gpt5_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>; }; - gpt6_gate_fck: gpt6_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <7>; - reg = <0x1000>; - }; - - gpt6_mux_fck: gpt6_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <4>; - reg = <0x1040>; - }; - gpt6_fck: gpt6_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>; }; - gpt7_gate_fck: gpt7_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <8>; - reg = <0x1000>; - }; - - gpt7_mux_fck: gpt7_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <5>; - reg = <0x1040>; - }; - gpt7_fck: gpt7_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>; }; - gpt8_gate_fck: gpt8_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <9>; - reg = <0x1000>; - }; - - gpt8_mux_fck: gpt8_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <6>; - reg = <0x1040>; - }; - gpt8_fck: gpt8_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>; }; - gpt9_gate_fck: gpt9_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <10>; - reg = <0x1000>; - }; - - gpt9_mux_fck: gpt9_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <7>; - reg = <0x1040>; - }; - gpt9_fck: gpt9_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; @@ -1281,54 +1528,6 @@ clock-div = <1>; }; - gpio6_dbck: gpio6_dbck@1000 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <17>; - }; - - gpio5_dbck: gpio5_dbck@1000 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <16>; - }; - - gpio4_dbck: gpio4_dbck@1000 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <15>; - }; - - gpio3_dbck: gpio3_dbck@1000 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <14>; - }; - - gpio2_dbck: gpio2_dbck@1000 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <13>; - }; - - wdt3_fck: wdt3_fck@1000 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <12>; - }; - per_l4_ick: per_l4_ick { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -1337,187 +1536,164 @@ clock-div = <1>; }; - gpio6_ick: gpio6_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <17>; - }; - - gpio5_ick: gpio5_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <16>; - }; - - gpio4_ick: gpio4_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <15>; - }; - - gpio3_ick: gpio3_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <14>; - }; - - gpio2_ick: gpio2_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <13>; - }; - - wdt3_ick: wdt3_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <12>; - }; - - uart3_ick: uart3_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <11>; - }; - - uart4_ick: uart4_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <18>; - }; - - gpt9_ick: gpt9_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <10>; - }; - - gpt8_ick: gpt8_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <9>; - }; - - gpt7_ick: gpt7_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <8>; - }; - - gpt6_ick: gpt6_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <7>; - }; - - gpt5_ick: gpt5_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <6>; - }; - - gpt4_ick: gpt4_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <5>; - }; - - gpt3_ick: gpt3_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <4>; - }; - - gpt2_ick: gpt2_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <3>; - }; - - mcbsp2_ick: mcbsp2_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <0>; - }; - - mcbsp3_ick: mcbsp3_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <1>; - }; - - mcbsp4_ick: mcbsp4_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; + /* CM_ICLKEN_PER */ + clock@1010 { + compatible = "ti,clksel"; reg = <0x1010>; - ti,bit-shift = <2>; - }; - - mcbsp2_gate_fck: mcbsp2_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&mcbsp_clks>; - ti,bit-shift = <0>; - reg = <0x1000>; - }; - - mcbsp3_gate_fck: mcbsp3_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&mcbsp_clks>; - ti,bit-shift = <1>; - reg = <0x1000>; - }; - - mcbsp4_gate_fck: mcbsp4_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&mcbsp_clks>; - ti,bit-shift = <2>; - reg = <0x1000>; - }; - - emu_src_mux_ck: emu_src_mux_ck@1140 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>; - reg = <0x1140>; + #clock-cells = <2>; + #address-cells = <0>; + + gpio6_ick: clock-gpio6-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio6_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <17>; + }; + + gpio5_ick: clock-gpio5-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio5_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <16>; + }; + + gpio4_ick: clock-gpio4-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio4_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <15>; + }; + + gpio3_ick: clock-gpio3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio3_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <14>; + }; + + gpio2_ick: clock-gpio2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio2_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <13>; + }; + + wdt3_ick: clock-wdt3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "wdt3_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <12>; + }; + + uart3_ick: clock-uart3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "uart3_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <11>; + }; + + uart4_ick: clock-uart4-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "uart4_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <18>; + }; + + gpt9_ick: clock-gpt9-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt9_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <10>; + }; + + gpt8_ick: clock-gpt8-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt8_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <9>; + }; + + gpt7_ick: clock-gpt7-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt7_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <8>; + }; + + gpt6_ick: clock-gpt6-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt6_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <7>; + }; + + gpt5_ick: clock-gpt5-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt5_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <6>; + }; + + gpt4_ick: clock-gpt4-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt4_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <5>; + }; + + gpt3_ick: clock-gpt3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt3_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <4>; + }; + + gpt2_ick: clock-gpt2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt2_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <3>; + }; + + mcbsp2_ick: clock-mcbsp2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcbsp2_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <0>; + }; + + mcbsp3_ick: clock-mcbsp3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcbsp3_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <1>; + }; + + mcbsp4_ick: clock-mcbsp4-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcbsp4_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <2>; + }; }; emu_src_ck: emu_src_ck { @@ -1526,54 +1702,6 @@ clocks = <&emu_src_mux_ck>; }; - pclk_fck: pclk_fck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&emu_src_ck>; - ti,bit-shift = <8>; - ti,max-div = <7>; - reg = <0x1140>; - ti,index-starts-at-one; - }; - - pclkx2_fck: pclkx2_fck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&emu_src_ck>; - ti,bit-shift = <6>; - ti,max-div = <3>; - reg = <0x1140>; - ti,index-starts-at-one; - }; - - atclk_fck: atclk_fck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&emu_src_ck>; - ti,bit-shift = <4>; - ti,max-div = <3>; - reg = <0x1140>; - ti,index-starts-at-one; - }; - - traceclk_src_fck: traceclk_src_fck@1140 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>; - ti,bit-shift = <2>; - reg = <0x1140>; - }; - - traceclk_fck: traceclk_fck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&traceclk_src_fck>; - ti,bit-shift = <11>; - ti,max-div = <7>; - reg = <0x1140>; - ti,index-starts-at-one; - }; - secure_32k_fck: secure_32k_fck { #clock-cells = <0>; compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 609a8dea946b..518652a599bd 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -558,7 +558,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { + ethernet: ethernet@1 { compatible = "usb424,ec00"; reg = <1>; }; diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi index 39297868ec85..581e088231b5 100644 --- a/arch/arm/boot/dts/omap443x-clocks.dtsi +++ b/arch/arm/boot/dts/omap443x-clocks.dtsi @@ -8,6 +8,7 @@ bandgap_fclk: bandgap_fclk@1888 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "bandgap_fclk"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x1888>; diff --git a/arch/arm/boot/dts/omap446x-clocks.dtsi b/arch/arm/boot/dts/omap446x-clocks.dtsi index 0f41714cffbb..d9362fef6720 100644 --- a/arch/arm/boot/dts/omap446x-clocks.dtsi +++ b/arch/arm/boot/dts/omap446x-clocks.dtsi @@ -8,6 +8,7 @@ div_ts_ck: div_ts_ck@1888 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "div_ts_ck"; clocks = <&l4_wkup_clk_mux_ck>; ti,bit-shift = <24>; reg = <0x1888>; @@ -17,6 +18,7 @@ bandgap_ts_fclk: bandgap_ts_fclk@1888 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "bandgap_ts_fclk"; clocks = <&div_ts_ck>; ti,bit-shift = <8>; reg = <0x1888>; diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi index 1f1c04d8f472..8df73d285638 100644 --- a/arch/arm/boot/dts/omap44xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi @@ -8,18 +8,21 @@ extalt_clkin_ck: extalt_clkin_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "extalt_clkin_ck"; clock-frequency = <59000000>; }; pad_clks_src_ck: pad_clks_src_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "pad_clks_src_ck"; clock-frequency = <12000000>; }; pad_clks_ck: pad_clks_ck@108 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "pad_clks_ck"; clocks = <&pad_clks_src_ck>; ti,bit-shift = <8>; reg = <0x0108>; @@ -28,24 +31,28 @@ pad_slimbus_core_clks_ck: pad_slimbus_core_clks_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "pad_slimbus_core_clks_ck"; clock-frequency = <12000000>; }; secure_32k_clk_src_ck: secure_32k_clk_src_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "secure_32k_clk_src_ck"; clock-frequency = <32768>; }; slimbus_src_clk: slimbus_src_clk { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "slimbus_src_clk"; clock-frequency = <12000000>; }; slimbus_clk: slimbus_clk@108 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "slimbus_clk"; clocks = <&slimbus_src_clk>; ti,bit-shift = <10>; reg = <0x0108>; @@ -54,84 +61,98 @@ sys_32k_ck: sys_32k_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "sys_32k_ck"; clock-frequency = <32768>; }; virt_12000000_ck: virt_12000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_12000000_ck"; clock-frequency = <12000000>; }; virt_13000000_ck: virt_13000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_13000000_ck"; clock-frequency = <13000000>; }; virt_16800000_ck: virt_16800000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_16800000_ck"; clock-frequency = <16800000>; }; virt_19200000_ck: virt_19200000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_19200000_ck"; clock-frequency = <19200000>; }; virt_26000000_ck: virt_26000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_26000000_ck"; clock-frequency = <26000000>; }; virt_27000000_ck: virt_27000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_27000000_ck"; clock-frequency = <27000000>; }; virt_38400000_ck: virt_38400000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_38400000_ck"; clock-frequency = <38400000>; }; tie_low_clock_ck: tie_low_clock_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "tie_low_clock_ck"; clock-frequency = <0>; }; utmi_phy_clkout_ck: utmi_phy_clkout_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "utmi_phy_clkout_ck"; clock-frequency = <60000000>; }; xclk60mhsp1_ck: xclk60mhsp1_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "xclk60mhsp1_ck"; clock-frequency = <60000000>; }; xclk60mhsp2_ck: xclk60mhsp2_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "xclk60mhsp2_ck"; clock-frequency = <60000000>; }; xclk60motg_ck: xclk60motg_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "xclk60motg_ck"; clock-frequency = <60000000>; }; dpll_abe_ck: dpll_abe_ck@1e0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-m4xen-clock"; + clock-output-names = "dpll_abe_ck"; clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>; reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>; }; @@ -139,6 +160,7 @@ dpll_abe_x2_ck: dpll_abe_x2_ck@1f0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_abe_x2_ck"; clocks = <&dpll_abe_ck>; reg = <0x01f0>; }; @@ -146,6 +168,7 @@ dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m2x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -157,6 +180,7 @@ abe_24m_fclk: abe_24m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "abe_24m_fclk"; clocks = <&dpll_abe_m2x2_ck>; clock-mult = <1>; clock-div = <8>; @@ -165,6 +189,7 @@ abe_clk: abe_clk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_clk"; clocks = <&dpll_abe_m2x2_ck>; ti,max-div = <4>; reg = <0x0108>; @@ -175,6 +200,7 @@ dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m3x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -186,6 +212,7 @@ core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck@12c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "core_hsd_byp_clk_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x012c>; @@ -194,6 +221,7 @@ dpll_core_ck: dpll_core_ck@120 { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; + clock-output-names = "dpll_core_ck"; clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; @@ -201,12 +229,14 @@ dpll_core_x2_ck: dpll_core_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_core_x2_ck"; clocks = <&dpll_core_ck>; }; dpll_core_m6x2_ck: dpll_core_m6x2_ck@140 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m6x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -218,6 +248,7 @@ dpll_core_m2_ck: dpll_core_m2_ck@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m2_ck"; clocks = <&dpll_core_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -229,6 +260,7 @@ ddrphy_ck: ddrphy_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "ddrphy_ck"; clocks = <&dpll_core_m2_ck>; clock-mult = <1>; clock-div = <2>; @@ -237,6 +269,7 @@ dpll_core_m5x2_ck: dpll_core_m5x2_ck@13c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m5x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -248,6 +281,7 @@ div_core_ck: div_core_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "div_core_ck"; clocks = <&dpll_core_m5x2_ck>; reg = <0x0100>; ti,max-div = <2>; @@ -256,6 +290,7 @@ div_iva_hs_clk: div_iva_hs_clk@1dc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "div_iva_hs_clk"; clocks = <&dpll_core_m5x2_ck>; ti,max-div = <4>; reg = <0x01dc>; @@ -265,6 +300,7 @@ div_mpu_hs_clk: div_mpu_hs_clk@19c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "div_mpu_hs_clk"; clocks = <&dpll_core_m5x2_ck>; ti,max-div = <4>; reg = <0x019c>; @@ -274,6 +310,7 @@ dpll_core_m4x2_ck: dpll_core_m4x2_ck@138 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m4x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -285,6 +322,7 @@ dll_clk_div_ck: dll_clk_div_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dll_clk_div_ck"; clocks = <&dpll_core_m4x2_ck>; clock-mult = <1>; clock-div = <2>; @@ -293,6 +331,7 @@ dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m2_ck"; clocks = <&dpll_abe_ck>; ti,max-div = <31>; reg = <0x01f0>; @@ -302,6 +341,7 @@ dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck@134 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "dpll_core_m3x2_gate_ck"; clocks = <&dpll_core_x2_ck>; ti,bit-shift = <8>; reg = <0x0134>; @@ -310,6 +350,7 @@ dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck@134 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; + clock-output-names = "dpll_core_m3x2_div_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; reg = <0x0134>; @@ -319,12 +360,14 @@ dpll_core_m3x2_ck: dpll_core_m3x2_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "dpll_core_m3x2_ck"; clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>; }; dpll_core_m7x2_ck: dpll_core_m7x2_ck@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m7x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -336,6 +379,7 @@ iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck@1ac { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "iva_hsd_byp_clk_mux_ck"; clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>; ti,bit-shift = <23>; reg = <0x01ac>; @@ -344,6 +388,7 @@ dpll_iva_ck: dpll_iva_ck@1a0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_iva_ck"; clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; assigned-clocks = <&dpll_iva_ck>; @@ -353,12 +398,14 @@ dpll_iva_x2_ck: dpll_iva_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_iva_x2_ck"; clocks = <&dpll_iva_ck>; }; dpll_iva_m4x2_ck: dpll_iva_m4x2_ck@1b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_iva_m4x2_ck"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -372,6 +419,7 @@ dpll_iva_m5x2_ck: dpll_iva_m5x2_ck@1bc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_iva_m5x2_ck"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -385,6 +433,7 @@ dpll_mpu_ck: dpll_mpu_ck@160 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_mpu_ck"; clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>; reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; }; @@ -392,6 +441,7 @@ dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_mpu_m2_ck"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -403,6 +453,7 @@ per_hs_clk_div_ck: per_hs_clk_div_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "per_hs_clk_div_ck"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <2>; @@ -411,6 +462,7 @@ usb_hs_clk_div_ck: usb_hs_clk_div_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "usb_hs_clk_div_ck"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <3>; @@ -419,6 +471,7 @@ l3_div_ck: l3_div_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3_div_ck"; clocks = <&div_core_ck>; ti,bit-shift = <4>; ti,max-div = <2>; @@ -428,6 +481,7 @@ l4_div_ck: l4_div_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l4_div_ck"; clocks = <&l3_div_ck>; ti,bit-shift = <8>; ti,max-div = <2>; @@ -437,6 +491,7 @@ lp_clk_div_ck: lp_clk_div_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "lp_clk_div_ck"; clocks = <&dpll_abe_m2x2_ck>; clock-mult = <1>; clock-div = <16>; @@ -445,6 +500,7 @@ mpu_periphclk: mpu_periphclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mpu_periphclk"; clocks = <&dpll_mpu_ck>; clock-mult = <1>; clock-div = <2>; @@ -453,6 +509,7 @@ ocp_abe_iclk: ocp_abe_iclk@528 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "ocp_abe_iclk"; clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 24>; ti,bit-shift = <24>; reg = <0x0528>; @@ -462,6 +519,7 @@ per_abe_24m_fclk: per_abe_24m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "per_abe_24m_fclk"; clocks = <&dpll_abe_m2_ck>; clock-mult = <1>; clock-div = <4>; @@ -470,6 +528,7 @@ dummy_ck: dummy_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "dummy_ck"; clock-frequency = <0>; }; }; @@ -478,6 +537,7 @@ sys_clkin_ck: sys_clkin_ck@110 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_clkin_ck"; clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; reg = <0x0110>; ti,index-starts-at-one; @@ -486,6 +546,7 @@ abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_bypass_clk_mux_ck"; clocks = <&sys_clkin_ck>, <&sys_32k_ck>; ti,bit-shift = <24>; reg = <0x0108>; @@ -494,6 +555,7 @@ abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck@10c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_refclk_mux_ck"; clocks = <&sys_clkin_ck>, <&sys_32k_ck>; reg = <0x010c>; }; @@ -501,6 +563,7 @@ dbgclk_mux_ck: dbgclk_mux_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dbgclk_mux_ck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; @@ -509,6 +572,7 @@ l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "l4_wkup_clk_mux_ck"; clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>; reg = <0x0108>; }; @@ -516,6 +580,7 @@ syc_clk_div_ck: syc_clk_div_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "syc_clk_div_ck"; clocks = <&sys_clkin_ck>; reg = <0x0100>; ti,max-div = <2>; @@ -524,6 +589,7 @@ usim_ck: usim_ck@1858 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "usim_ck"; clocks = <&dpll_per_m4x2_ck>; ti,bit-shift = <24>; reg = <0x1858>; @@ -533,6 +599,7 @@ usim_fclk: usim_fclk@1858 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usim_fclk"; clocks = <&usim_ck>; ti,bit-shift = <8>; reg = <0x1858>; @@ -541,6 +608,7 @@ trace_clk_div_ck: trace_clk_div_ck { #clock-cells = <0>; compatible = "ti,clkdm-gate-clock"; + clock-output-names = "trace_clk_div_ck"; clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 24>; }; }; @@ -548,6 +616,7 @@ &prm_clockdomains { emu_sys_clkdm: emu_sys_clkdm { compatible = "ti,clockdomain"; + clock-output-names = "emu_sys_clkdm"; clocks = <&trace_clk_div_ck>; }; }; @@ -556,6 +625,7 @@ per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck@14c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "per_hsd_byp_clk_mux_ck"; clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>; ti,bit-shift = <23>; reg = <0x014c>; @@ -564,6 +634,7 @@ dpll_per_ck: dpll_per_ck@140 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_per_ck"; clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; @@ -571,6 +642,7 @@ dpll_per_m2_ck: dpll_per_m2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2_ck"; clocks = <&dpll_per_ck>; ti,max-div = <31>; reg = <0x0150>; @@ -580,6 +652,7 @@ dpll_per_x2_ck: dpll_per_x2_ck@150 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_per_x2_ck"; clocks = <&dpll_per_ck>; reg = <0x0150>; }; @@ -587,6 +660,7 @@ dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -598,6 +672,7 @@ dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck@154 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "dpll_per_m3x2_gate_ck"; clocks = <&dpll_per_x2_ck>; ti,bit-shift = <8>; reg = <0x0154>; @@ -606,6 +681,7 @@ dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck@154 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; + clock-output-names = "dpll_per_m3x2_div_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; reg = <0x0154>; @@ -615,12 +691,14 @@ dpll_per_m3x2_ck: dpll_per_m3x2_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "dpll_per_m3x2_ck"; clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>; }; dpll_per_m4x2_ck: dpll_per_m4x2_ck@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m4x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -632,6 +710,7 @@ dpll_per_m5x2_ck: dpll_per_m5x2_ck@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m5x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -643,6 +722,7 @@ dpll_per_m6x2_ck: dpll_per_m6x2_ck@160 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m6x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -654,6 +734,7 @@ dpll_per_m7x2_ck: dpll_per_m7x2_ck@164 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m7x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -665,6 +746,7 @@ dpll_usb_ck: dpll_usb_ck@180 { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; + clock-output-names = "dpll_usb_ck"; clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; @@ -672,6 +754,7 @@ dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck@1b4 { #clock-cells = <0>; compatible = "ti,fixed-factor-clock"; + clock-output-names = "dpll_usb_clkdcoldo_ck"; clocks = <&dpll_usb_ck>; ti,clock-div = <1>; ti,autoidle-shift = <8>; @@ -683,6 +766,7 @@ dpll_usb_m2_ck: dpll_usb_m2_ck@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_usb_m2_ck"; clocks = <&dpll_usb_ck>; ti,max-div = <127>; ti,autoidle-shift = <8>; @@ -694,6 +778,7 @@ ducati_clk_mux_ck: ducati_clk_mux_ck@100 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "ducati_clk_mux_ck"; clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>; reg = <0x0100>; }; @@ -701,6 +786,7 @@ func_12m_fclk: func_12m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_12m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <16>; @@ -709,6 +795,7 @@ func_24m_clk: func_24m_clk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_24m_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; @@ -717,6 +804,7 @@ func_24mc_fclk: func_24mc_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_24mc_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <8>; @@ -725,6 +813,7 @@ func_48m_fclk: func_48m_fclk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "func_48m_fclk"; clocks = <&dpll_per_m2x2_ck>; reg = <0x0108>; ti,dividers = <4>, <8>; @@ -733,6 +822,7 @@ func_48mc_fclk: func_48mc_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_48mc_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <4>; @@ -741,6 +831,7 @@ func_64m_fclk: func_64m_fclk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "func_64m_fclk"; clocks = <&dpll_per_m4x2_ck>; reg = <0x0108>; ti,dividers = <2>, <4>; @@ -749,6 +840,7 @@ func_96m_fclk: func_96m_fclk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "func_96m_fclk"; clocks = <&dpll_per_m2x2_ck>; reg = <0x0108>; ti,dividers = <2>, <4>; @@ -757,6 +849,7 @@ init_60m_fclk: init_60m_fclk@104 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "init_60m_fclk"; clocks = <&dpll_usb_m2_ck>; reg = <0x0104>; ti,dividers = <1>, <8>; @@ -765,6 +858,7 @@ per_abe_nc_fclk: per_abe_nc_fclk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "per_abe_nc_fclk"; clocks = <&dpll_abe_m2_ck>; reg = <0x0108>; ti,max-div = <2>; @@ -773,6 +867,7 @@ usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy_cm_clk32k"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x0640>; @@ -782,6 +877,7 @@ &cm2_clockdomains { l3_init_clkdm: l3_init_clkdm { compatible = "ti,clockdomain"; + clock-output-names = "l3_init_clkdm"; clocks = <&dpll_usb_ck>; }; }; @@ -790,6 +886,7 @@ auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk0_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0310>; @@ -798,6 +895,7 @@ auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk0_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0310>; @@ -806,12 +904,14 @@ auxclk0_src_ck: auxclk0_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk0_src_ck"; clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>; }; auxclk0_ck: auxclk0_ck@310 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk0_ck"; clocks = <&auxclk0_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -821,6 +921,7 @@ auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk1_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0314>; @@ -829,6 +930,7 @@ auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk1_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0314>; @@ -837,12 +939,14 @@ auxclk1_src_ck: auxclk1_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk1_src_ck"; clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>; }; auxclk1_ck: auxclk1_ck@314 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk1_ck"; clocks = <&auxclk1_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -852,6 +956,7 @@ auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk2_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0318>; @@ -860,6 +965,7 @@ auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk2_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0318>; @@ -868,12 +974,14 @@ auxclk2_src_ck: auxclk2_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk2_src_ck"; clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>; }; auxclk2_ck: auxclk2_ck@318 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk2_ck"; clocks = <&auxclk2_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -883,6 +991,7 @@ auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk3_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x031c>; @@ -891,6 +1000,7 @@ auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk3_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x031c>; @@ -899,12 +1009,14 @@ auxclk3_src_ck: auxclk3_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk3_src_ck"; clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>; }; auxclk3_ck: auxclk3_ck@31c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk3_ck"; clocks = <&auxclk3_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -914,6 +1026,7 @@ auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk4_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0320>; @@ -922,6 +1035,7 @@ auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk4_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0320>; @@ -930,12 +1044,14 @@ auxclk4_src_ck: auxclk4_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk4_src_ck"; clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>; }; auxclk4_ck: auxclk4_ck@320 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk4_ck"; clocks = <&auxclk4_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -945,6 +1061,7 @@ auxclk5_src_gate_ck: auxclk5_src_gate_ck@324 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk5_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0324>; @@ -953,6 +1070,7 @@ auxclk5_src_mux_ck: auxclk5_src_mux_ck@324 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk5_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0324>; @@ -961,12 +1079,14 @@ auxclk5_src_ck: auxclk5_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk5_src_ck"; clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>; }; auxclk5_ck: auxclk5_ck@324 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk5_ck"; clocks = <&auxclk5_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -976,6 +1096,7 @@ auxclkreq0_ck: auxclkreq0_ck@210 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq0_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x0210>; @@ -984,6 +1105,7 @@ auxclkreq1_ck: auxclkreq1_ck@214 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq1_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x0214>; @@ -992,6 +1114,7 @@ auxclkreq2_ck: auxclkreq2_ck@218 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq2_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x0218>; @@ -1000,6 +1123,7 @@ auxclkreq3_ck: auxclkreq3_ck@21c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq3_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x021c>; @@ -1008,6 +1132,7 @@ auxclkreq4_ck: auxclkreq4_ck@220 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq4_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x0220>; @@ -1016,6 +1141,7 @@ auxclkreq5_ck: auxclkreq5_ck@224 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq5_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x0224>; @@ -1025,6 +1151,7 @@ &cm1 { mpuss_cm: mpuss_cm@300 { compatible = "ti,omap4-cm"; + clock-output-names = "mpuss_cm"; reg = <0x300 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1032,6 +1159,7 @@ mpuss_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "mpuss_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1039,6 +1167,7 @@ tesla_cm: tesla_cm@400 { compatible = "ti,omap4-cm"; + clock-output-names = "tesla_cm"; reg = <0x400 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1046,6 +1175,7 @@ tesla_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "tesla_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1053,6 +1183,7 @@ abe_cm: abe_cm@500 { compatible = "ti,omap4-cm"; + clock-output-names = "abe_cm"; reg = <0x500 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1060,6 +1191,7 @@ abe_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "abe_clkctrl"; reg = <0x20 0x6c>; #clock-cells = <2>; }; @@ -1070,6 +1202,7 @@ &cm2 { l4_ao_cm: l4_ao_cm@600 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_ao_cm"; reg = <0x600 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1077,6 +1210,7 @@ l4_ao_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4_ao_clkctrl"; reg = <0x20 0x1c>; #clock-cells = <2>; }; @@ -1084,6 +1218,7 @@ l3_1_cm: l3_1_cm@700 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_1_cm"; reg = <0x700 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1091,6 +1226,7 @@ l3_1_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_1_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1098,6 +1234,7 @@ l3_2_cm: l3_2_cm@800 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_2_cm"; reg = <0x800 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1105,6 +1242,7 @@ l3_2_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_2_clkctrl"; reg = <0x20 0x14>; #clock-cells = <2>; }; @@ -1112,6 +1250,7 @@ ducati_cm: ducati_cm@900 { compatible = "ti,omap4-cm"; + clock-output-names = "ducati_cm"; reg = <0x900 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1119,6 +1258,7 @@ ducati_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "ducati_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1126,6 +1266,7 @@ l3_dma_cm: l3_dma_cm@a00 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_dma_cm"; reg = <0xa00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1133,6 +1274,7 @@ l3_dma_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_dma_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1140,6 +1282,7 @@ l3_emif_cm: l3_emif_cm@b00 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_emif_cm"; reg = <0xb00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1147,6 +1290,7 @@ l3_emif_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_emif_clkctrl"; reg = <0x20 0x1c>; #clock-cells = <2>; }; @@ -1154,6 +1298,7 @@ d2d_cm: d2d_cm@c00 { compatible = "ti,omap4-cm"; + clock-output-names = "d2d_cm"; reg = <0xc00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1161,6 +1306,7 @@ d2d_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "d2d_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1168,6 +1314,7 @@ l4_cfg_cm: l4_cfg_cm@d00 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_cfg_cm"; reg = <0xd00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1175,6 +1322,7 @@ l4_cfg_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4_cfg_clkctrl"; reg = <0x20 0x14>; #clock-cells = <2>; }; @@ -1182,6 +1330,7 @@ l3_instr_cm: l3_instr_cm@e00 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_instr_cm"; reg = <0xe00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1189,6 +1338,7 @@ l3_instr_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_instr_clkctrl"; reg = <0x20 0x24>; #clock-cells = <2>; }; @@ -1196,6 +1346,7 @@ ivahd_cm: ivahd_cm@f00 { compatible = "ti,omap4-cm"; + clock-output-names = "ivahd_cm"; reg = <0xf00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1203,6 +1354,7 @@ ivahd_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "ivahd_clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; @@ -1210,6 +1362,7 @@ iss_cm: iss_cm@1000 { compatible = "ti,omap4-cm"; + clock-output-names = "iss_cm"; reg = <0x1000 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1217,6 +1370,7 @@ iss_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "iss_clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; @@ -1224,6 +1378,7 @@ l3_dss_cm: l3_dss_cm@1100 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_dss_cm"; reg = <0x1100 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1231,6 +1386,7 @@ l3_dss_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_dss_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1238,6 +1394,7 @@ l3_gfx_cm: l3_gfx_cm@1200 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_gfx_cm"; reg = <0x1200 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1245,6 +1402,7 @@ l3_gfx_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_gfx_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1252,6 +1410,7 @@ l3_init_cm: l3_init_cm@1300 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_init_cm"; reg = <0x1300 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1259,26 +1418,30 @@ l3_init_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_init_clkctrl"; reg = <0x20 0xc4>; #clock-cells = <2>; }; }; - l4_per_cm: l4_per_cm@1400 { + l4_per_cm: clock@1400 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_per_cm"; reg = <0x1400 0x200>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1400 0x200>; l4_per_clkctrl: clock@20 { - compatible = "ti,clkctrl-l4-per", "ti,clkctrl"; + compatible = "ti,clkctrl"; + clock-output-names = "l4_per_clkctrl"; reg = <0x20 0x144>; #clock-cells = <2>; }; l4_secure_clkctrl: clock@1a0 { - compatible = "ti,clkctrl-l4-secure", "ti,clkctrl"; + compatible = "ti,clkctrl"; + clock-output-names = "l4_secure_clkctrl"; reg = <0x1a0 0x3c>; #clock-cells = <2>; }; @@ -1288,6 +1451,7 @@ &prm { l4_wkup_cm: l4_wkup_cm@1800 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_wkup_cm"; reg = <0x1800 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1295,6 +1459,7 @@ l4_wkup_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4_wkup_clkctrl"; reg = <0x20 0x5c>; #clock-cells = <2>; }; @@ -1302,6 +1467,7 @@ emu_sys_cm: emu_sys_cm@1a00 { compatible = "ti,omap4-cm"; + clock-output-names = "emu_sys_cm"; reg = <0x1a00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1309,6 +1475,7 @@ emu_sys_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "emu_sys_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts index 76e499d89d24..3851120857d7 100644 --- a/arch/arm/boot/dts/omap5-igep0050.dts +++ b/arch/arm/boot/dts/omap5-igep0050.dts @@ -128,7 +128,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@3 { + ethernet: ethernet@3 { compatible = "usb424,7500"; reg = <3>; }; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 51d5fcae5081..453da9f18a99 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -209,7 +209,7 @@ #size-cells = <0>; }; - ethernet: usbether@3 { + ethernet: ethernet@3 { compatible = "usb424,9730"; reg = <3>; }; diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index 42f2c447727d..5cf3b0e78c15 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -8,12 +8,14 @@ pad_clks_src_ck: pad_clks_src_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "pad_clks_src_ck"; clock-frequency = <12000000>; }; pad_clks_ck: pad_clks_ck@108 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "pad_clks_ck"; clocks = <&pad_clks_src_ck>; ti,bit-shift = <8>; reg = <0x0108>; @@ -22,18 +24,21 @@ secure_32k_clk_src_ck: secure_32k_clk_src_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "secure_32k_clk_src_ck"; clock-frequency = <32768>; }; slimbus_src_clk: slimbus_src_clk { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "slimbus_src_clk"; clock-frequency = <12000000>; }; slimbus_clk: slimbus_clk@108 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "slimbus_clk"; clocks = <&slimbus_src_clk>; ti,bit-shift = <10>; reg = <0x0108>; @@ -42,66 +47,77 @@ sys_32k_ck: sys_32k_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "sys_32k_ck"; clock-frequency = <32768>; }; virt_12000000_ck: virt_12000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_12000000_ck"; clock-frequency = <12000000>; }; virt_13000000_ck: virt_13000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_13000000_ck"; clock-frequency = <13000000>; }; virt_16800000_ck: virt_16800000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_16800000_ck"; clock-frequency = <16800000>; }; virt_19200000_ck: virt_19200000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_19200000_ck"; clock-frequency = <19200000>; }; virt_26000000_ck: virt_26000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_26000000_ck"; clock-frequency = <26000000>; }; virt_27000000_ck: virt_27000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_27000000_ck"; clock-frequency = <27000000>; }; virt_38400000_ck: virt_38400000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_38400000_ck"; clock-frequency = <38400000>; }; xclk60mhsp1_ck: xclk60mhsp1_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "xclk60mhsp1_ck"; clock-frequency = <60000000>; }; xclk60mhsp2_ck: xclk60mhsp2_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "xclk60mhsp2_ck"; clock-frequency = <60000000>; }; dpll_abe_ck: dpll_abe_ck@1e0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-m4xen-clock"; + clock-output-names = "dpll_abe_ck"; clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>; reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>; }; @@ -109,12 +125,14 @@ dpll_abe_x2_ck: dpll_abe_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_abe_x2_ck"; clocks = <&dpll_abe_ck>; }; dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m2x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; reg = <0x01f0>; @@ -124,6 +142,7 @@ abe_24m_fclk: abe_24m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "abe_24m_fclk"; clocks = <&dpll_abe_m2x2_ck>; clock-mult = <1>; clock-div = <8>; @@ -132,6 +151,7 @@ abe_clk: abe_clk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_clk"; clocks = <&dpll_abe_m2x2_ck>; ti,max-div = <4>; reg = <0x0108>; @@ -141,6 +161,7 @@ abe_iclk: abe_iclk@528 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_iclk"; clocks = <&aess_fclk>; ti,bit-shift = <24>; reg = <0x0528>; @@ -150,6 +171,7 @@ abe_lp_clk_div: abe_lp_clk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "abe_lp_clk_div"; clocks = <&dpll_abe_m2x2_ck>; clock-mult = <1>; clock-div = <16>; @@ -158,6 +180,7 @@ dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m3x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; reg = <0x01f4>; @@ -167,6 +190,7 @@ dpll_core_byp_mux: dpll_core_byp_mux@12c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_core_byp_mux"; clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x012c>; @@ -175,6 +199,7 @@ dpll_core_ck: dpll_core_ck@120 { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; + clock-output-names = "dpll_core_ck"; clocks = <&sys_clkin>, <&dpll_core_byp_mux>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; @@ -182,12 +207,14 @@ dpll_core_x2_ck: dpll_core_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_core_x2_ck"; clocks = <&dpll_core_ck>; }; dpll_core_h21x2_ck: dpll_core_h21x2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h21x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0150>; @@ -197,6 +224,7 @@ c2c_fclk: c2c_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "c2c_fclk"; clocks = <&dpll_core_h21x2_ck>; clock-mult = <1>; clock-div = <1>; @@ -205,6 +233,7 @@ c2c_iclk: c2c_iclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "c2c_iclk"; clocks = <&c2c_fclk>; clock-mult = <1>; clock-div = <2>; @@ -213,6 +242,7 @@ dpll_core_h11x2_ck: dpll_core_h11x2_ck@138 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h11x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0138>; @@ -222,6 +252,7 @@ dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h12x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x013c>; @@ -231,6 +262,7 @@ dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h13x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0140>; @@ -240,6 +272,7 @@ dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h14x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0144>; @@ -249,6 +282,7 @@ dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h22x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0154>; @@ -258,6 +292,7 @@ dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h23x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0158>; @@ -267,6 +302,7 @@ dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h24x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x015c>; @@ -276,6 +312,7 @@ dpll_core_m2_ck: dpll_core_m2_ck@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m2_ck"; clocks = <&dpll_core_ck>; ti,max-div = <31>; reg = <0x0130>; @@ -285,6 +322,7 @@ dpll_core_m3x2_ck: dpll_core_m3x2_ck@134 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m3x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; reg = <0x0134>; @@ -294,6 +332,7 @@ iva_dpll_hs_clk_div: iva_dpll_hs_clk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "iva_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; @@ -302,6 +341,7 @@ dpll_iva_byp_mux: dpll_iva_byp_mux@1ac { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_iva_byp_mux"; clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x01ac>; @@ -310,6 +350,7 @@ dpll_iva_ck: dpll_iva_ck@1a0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_iva_ck"; clocks = <&sys_clkin>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; assigned-clocks = <&dpll_iva_ck>; @@ -319,12 +360,14 @@ dpll_iva_x2_ck: dpll_iva_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_iva_x2_ck"; clocks = <&dpll_iva_ck>; }; dpll_iva_h11x2_ck: dpll_iva_h11x2_ck@1b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_iva_h11x2_ck"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <63>; reg = <0x01b8>; @@ -336,6 +379,7 @@ dpll_iva_h12x2_ck: dpll_iva_h12x2_ck@1bc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_iva_h12x2_ck"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <63>; reg = <0x01bc>; @@ -347,6 +391,7 @@ mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mpu_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; @@ -355,6 +400,7 @@ dpll_mpu_ck: dpll_mpu_ck@160 { #clock-cells = <0>; compatible = "ti,omap5-mpu-dpll-clock"; + clock-output-names = "dpll_mpu_ck"; clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>; reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; }; @@ -362,6 +408,7 @@ dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_mpu_m2_ck"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; reg = <0x0170>; @@ -371,6 +418,7 @@ per_dpll_hs_clk_div: per_dpll_hs_clk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "per_dpll_hs_clk_div"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <2>; @@ -379,6 +427,7 @@ usb_dpll_hs_clk_div: usb_dpll_hs_clk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "usb_dpll_hs_clk_div"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <3>; @@ -387,6 +436,7 @@ l3_iclk_div: l3_iclk_div@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3_iclk_div"; ti,max-div = <2>; ti,bit-shift = <4>; reg = <0x100>; @@ -397,6 +447,7 @@ gpu_l3_iclk: gpu_l3_iclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "gpu_l3_iclk"; clocks = <&l3_iclk_div>; clock-mult = <1>; clock-div = <1>; @@ -405,6 +456,7 @@ l4_root_clk_div: l4_root_clk_div@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l4_root_clk_div"; ti,max-div = <2>; ti,bit-shift = <8>; reg = <0x100>; @@ -415,6 +467,7 @@ slimbus1_slimbus_clk: slimbus1_slimbus_clk@560 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "slimbus1_slimbus_clk"; clocks = <&slimbus_clk>; ti,bit-shift = <11>; reg = <0x0560>; @@ -423,6 +476,7 @@ aess_fclk: aess_fclk@528 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "aess_fclk"; clocks = <&abe_clk>; ti,bit-shift = <24>; ti,max-div = <2>; @@ -432,6 +486,7 @@ mcasp_sync_mux_ck: mcasp_sync_mux_ck@540 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "mcasp_sync_mux_ck"; clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>; ti,bit-shift = <26>; reg = <0x0540>; @@ -440,6 +495,7 @@ mcasp_gfclk: mcasp_gfclk@540 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "mcasp_gfclk"; clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; ti,bit-shift = <24>; reg = <0x0540>; @@ -448,6 +504,7 @@ dummy_ck: dummy_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "dummy_ck"; clock-frequency = <0>; }; }; @@ -455,6 +512,7 @@ sys_clkin: sys_clkin@110 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_clkin"; clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; reg = <0x0110>; ti,index-starts-at-one; @@ -463,6 +521,7 @@ abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_bypass_clk_mux"; clocks = <&sys_clkin>, <&sys_32k_ck>; reg = <0x0108>; }; @@ -470,6 +529,7 @@ abe_dpll_clk_mux: abe_dpll_clk_mux@10c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_clk_mux"; clocks = <&sys_clkin>, <&sys_32k_ck>; reg = <0x010c>; }; @@ -477,6 +537,7 @@ custefuse_sys_gfclk_div: custefuse_sys_gfclk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "custefuse_sys_gfclk_div"; clocks = <&sys_clkin>; clock-mult = <1>; clock-div = <2>; @@ -485,6 +546,7 @@ dss_syc_gfclk_div: dss_syc_gfclk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dss_syc_gfclk_div"; clocks = <&sys_clkin>; clock-mult = <1>; clock-div = <1>; @@ -493,6 +555,7 @@ wkupaon_iclk_mux: wkupaon_iclk_mux@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "wkupaon_iclk_mux"; clocks = <&sys_clkin>, <&abe_lp_clk_div>; reg = <0x0108>; }; @@ -500,6 +563,7 @@ l3instr_ts_gclk_div: l3instr_ts_gclk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l3instr_ts_gclk_div"; clocks = <&wkupaon_iclk_mux>; clock-mult = <1>; clock-div = <1>; @@ -511,6 +575,7 @@ dpll_per_byp_mux: dpll_per_byp_mux@14c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_per_byp_mux"; clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x014c>; @@ -519,6 +584,7 @@ dpll_per_ck: dpll_per_ck@140 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_per_ck"; clocks = <&sys_clkin>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; @@ -526,12 +592,14 @@ dpll_per_x2_ck: dpll_per_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_per_x2_ck"; clocks = <&dpll_per_ck>; }; dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h11x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; reg = <0x0158>; @@ -541,6 +609,7 @@ dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h12x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; reg = <0x015c>; @@ -550,6 +619,7 @@ dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h14x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; reg = <0x0164>; @@ -559,6 +629,7 @@ dpll_per_m2_ck: dpll_per_m2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2_ck"; clocks = <&dpll_per_ck>; ti,max-div = <31>; reg = <0x0150>; @@ -568,6 +639,7 @@ dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; reg = <0x0150>; @@ -577,6 +649,7 @@ dpll_per_m3x2_ck: dpll_per_m3x2_ck@154 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m3x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; reg = <0x0154>; @@ -586,6 +659,7 @@ dpll_unipro1_ck: dpll_unipro1_ck@200 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_unipro1_ck"; clocks = <&sys_clkin>, <&sys_clkin>; reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>; }; @@ -593,6 +667,7 @@ dpll_unipro1_clkdcoldo: dpll_unipro1_clkdcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_unipro1_clkdcoldo"; clocks = <&dpll_unipro1_ck>; clock-mult = <1>; clock-div = <1>; @@ -601,6 +676,7 @@ dpll_unipro1_m2_ck: dpll_unipro1_m2_ck@210 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_unipro1_m2_ck"; clocks = <&dpll_unipro1_ck>; ti,max-div = <127>; reg = <0x0210>; @@ -610,6 +686,7 @@ dpll_unipro2_ck: dpll_unipro2_ck@1c0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_unipro2_ck"; clocks = <&sys_clkin>, <&sys_clkin>; reg = <0x01c0>, <0x01c4>, <0x01cc>, <0x01c8>; }; @@ -617,6 +694,7 @@ dpll_unipro2_clkdcoldo: dpll_unipro2_clkdcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_unipro2_clkdcoldo"; clocks = <&dpll_unipro2_ck>; clock-mult = <1>; clock-div = <1>; @@ -625,6 +703,7 @@ dpll_unipro2_m2_ck: dpll_unipro2_m2_ck@1d0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_unipro2_m2_ck"; clocks = <&dpll_unipro2_ck>; ti,max-div = <127>; reg = <0x01d0>; @@ -634,6 +713,7 @@ dpll_usb_byp_mux: dpll_usb_byp_mux@18c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_usb_byp_mux"; clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x018c>; @@ -642,6 +722,7 @@ dpll_usb_ck: dpll_usb_ck@180 { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; + clock-output-names = "dpll_usb_ck"; clocks = <&sys_clkin>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; @@ -649,6 +730,7 @@ dpll_usb_clkdcoldo: dpll_usb_clkdcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_usb_clkdcoldo"; clocks = <&dpll_usb_ck>; clock-mult = <1>; clock-div = <1>; @@ -657,6 +739,7 @@ dpll_usb_m2_ck: dpll_usb_m2_ck@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_usb_m2_ck"; clocks = <&dpll_usb_ck>; ti,max-div = <127>; reg = <0x0190>; @@ -666,6 +749,7 @@ func_128m_clk: func_128m_clk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_128m_clk"; clocks = <&dpll_per_h11x2_ck>; clock-mult = <1>; clock-div = <2>; @@ -674,6 +758,7 @@ func_12m_fclk: func_12m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_12m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <16>; @@ -682,6 +767,7 @@ func_24m_clk: func_24m_clk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_24m_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; @@ -690,6 +776,7 @@ func_48m_fclk: func_48m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_48m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <4>; @@ -698,6 +785,7 @@ func_96m_fclk: func_96m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_96m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <2>; @@ -706,6 +794,7 @@ l3init_60m_fclk: l3init_60m_fclk@104 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3init_60m_fclk"; clocks = <&dpll_usb_m2_ck>; reg = <0x0104>; ti,dividers = <1>, <8>; @@ -714,6 +803,7 @@ iss_ctrlclk: iss_ctrlclk@1320 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "iss_ctrlclk"; clocks = <&func_96m_fclk>; ti,bit-shift = <8>; reg = <0x1320>; @@ -722,6 +812,7 @@ lli_txphy_clk: lli_txphy_clk@f20 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "lli_txphy_clk"; clocks = <&dpll_unipro1_clkdcoldo>; ti,bit-shift = <8>; reg = <0x0f20>; @@ -730,6 +821,7 @@ lli_txphy_ls_clk: lli_txphy_ls_clk@f20 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "lli_txphy_ls_clk"; clocks = <&dpll_unipro1_m2_ck>; ti,bit-shift = <9>; reg = <0x0f20>; @@ -738,6 +830,7 @@ usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy_cm_clk32k"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x0640>; @@ -746,6 +839,7 @@ fdif_fclk: fdif_fclk@1328 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "fdif_fclk"; clocks = <&dpll_per_h11x2_ck>; ti,bit-shift = <24>; ti,max-div = <2>; @@ -755,6 +849,7 @@ gpu_core_gclk_mux: gpu_core_gclk_mux@1520 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpu_core_gclk_mux"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>; ti,bit-shift = <24>; reg = <0x1520>; @@ -763,6 +858,7 @@ gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1520 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpu_hyd_gclk_mux"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>; ti,bit-shift = <25>; reg = <0x1520>; @@ -771,6 +867,7 @@ hsi_fclk: hsi_fclk@1638 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "hsi_fclk"; clocks = <&dpll_per_m2x2_ck>; ti,bit-shift = <24>; ti,max-div = <2>; @@ -781,6 +878,7 @@ &cm_core_clockdomains { l3init_clkdm: l3init_clkdm { compatible = "ti,clockdomain"; + clock-output-names = "l3init_clkdm"; clocks = <&dpll_usb_ck>; }; }; @@ -789,6 +887,7 @@ auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk0_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0310>; @@ -797,6 +896,7 @@ auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk0_src_mux_ck"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0310>; @@ -805,12 +905,14 @@ auxclk0_src_ck: auxclk0_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk0_src_ck"; clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>; }; auxclk0_ck: auxclk0_ck@310 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk0_ck"; clocks = <&auxclk0_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -820,6 +922,7 @@ auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk1_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0314>; @@ -828,6 +931,7 @@ auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk1_src_mux_ck"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0314>; @@ -836,12 +940,14 @@ auxclk1_src_ck: auxclk1_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk1_src_ck"; clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>; }; auxclk1_ck: auxclk1_ck@314 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk1_ck"; clocks = <&auxclk1_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -851,6 +957,7 @@ auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk2_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0318>; @@ -859,6 +966,7 @@ auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk2_src_mux_ck"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0318>; @@ -867,12 +975,14 @@ auxclk2_src_ck: auxclk2_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk2_src_ck"; clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>; }; auxclk2_ck: auxclk2_ck@318 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk2_ck"; clocks = <&auxclk2_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -882,6 +992,7 @@ auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk3_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x031c>; @@ -890,6 +1001,7 @@ auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk3_src_mux_ck"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x031c>; @@ -898,12 +1010,14 @@ auxclk3_src_ck: auxclk3_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk3_src_ck"; clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>; }; auxclk3_ck: auxclk3_ck@31c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk3_ck"; clocks = <&auxclk3_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -913,6 +1027,7 @@ auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk4_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0320>; @@ -921,6 +1036,7 @@ auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk4_src_mux_ck"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0320>; @@ -929,12 +1045,14 @@ auxclk4_src_ck: auxclk4_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk4_src_ck"; clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>; }; auxclk4_ck: auxclk4_ck@320 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk4_ck"; clocks = <&auxclk4_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -944,6 +1062,7 @@ auxclkreq0_ck: auxclkreq0_ck@210 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq0_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; ti,bit-shift = <2>; reg = <0x0210>; @@ -952,6 +1071,7 @@ auxclkreq1_ck: auxclkreq1_ck@214 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq1_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; ti,bit-shift = <2>; reg = <0x0214>; @@ -960,6 +1080,7 @@ auxclkreq2_ck: auxclkreq2_ck@218 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq2_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; ti,bit-shift = <2>; reg = <0x0218>; @@ -968,6 +1089,7 @@ auxclkreq3_ck: auxclkreq3_ck@21c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq3_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; ti,bit-shift = <2>; reg = <0x021c>; @@ -977,6 +1099,7 @@ &cm_core_aon { mpu_cm: mpu_cm@300 { compatible = "ti,omap4-cm"; + clock-output-names = "mpu_cm"; reg = <0x300 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -984,6 +1107,7 @@ mpu_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "mpu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -991,6 +1115,7 @@ dsp_cm: dsp_cm@400 { compatible = "ti,omap4-cm"; + clock-output-names = "dsp_cm"; reg = <0x400 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -998,6 +1123,7 @@ dsp_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "dsp_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1005,6 +1131,7 @@ abe_cm: abe_cm@500 { compatible = "ti,omap4-cm"; + clock-output-names = "abe_cm"; reg = <0x500 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1012,6 +1139,7 @@ abe_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "abe_clkctrl"; reg = <0x20 0x64>; #clock-cells = <2>; }; @@ -1022,6 +1150,7 @@ &cm_core { l3main1_cm: l3main1_cm@700 { compatible = "ti,omap4-cm"; + clock-output-names = "l3main1_cm"; reg = <0x700 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1029,6 +1158,7 @@ l3main1_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3main1_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1036,6 +1166,7 @@ l3main2_cm: l3main2_cm@800 { compatible = "ti,omap4-cm"; + clock-output-names = "l3main2_cm"; reg = <0x800 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1043,6 +1174,7 @@ l3main2_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3main2_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1050,6 +1182,7 @@ ipu_cm: ipu_cm@900 { compatible = "ti,omap4-cm"; + clock-output-names = "ipu_cm"; reg = <0x900 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1057,6 +1190,7 @@ ipu_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "ipu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1064,6 +1198,7 @@ dma_cm: dma_cm@a00 { compatible = "ti,omap4-cm"; + clock-output-names = "dma_cm"; reg = <0xa00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1071,6 +1206,7 @@ dma_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "dma_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1078,6 +1214,7 @@ emif_cm: emif_cm@b00 { compatible = "ti,omap4-cm"; + clock-output-names = "emif_cm"; reg = <0xb00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1085,6 +1222,7 @@ emif_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "emif_clkctrl"; reg = <0x20 0x1c>; #clock-cells = <2>; }; @@ -1092,6 +1230,7 @@ l4cfg_cm: l4cfg_cm@d00 { compatible = "ti,omap4-cm"; + clock-output-names = "l4cfg_cm"; reg = <0xd00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1099,6 +1238,7 @@ l4cfg_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4cfg_clkctrl"; reg = <0x20 0x14>; #clock-cells = <2>; }; @@ -1106,6 +1246,7 @@ l3instr_cm: l3instr_cm@e00 { compatible = "ti,omap4-cm"; + clock-output-names = "l3instr_cm"; reg = <0xe00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1113,26 +1254,30 @@ l3instr_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3instr_clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; }; - l4per_cm: l4per_cm@1000 { + l4per_cm: clock@1000 { compatible = "ti,omap4-cm"; + clock-output-names = "l4per_cm"; reg = <0x1000 0x200>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1000 0x200>; l4per_clkctrl: clock@20 { - compatible = "ti,clkctrl-l4per", "ti,clkctrl"; + compatible = "ti,clkctrl"; + clock-output-names = "l4per_clkctrl"; reg = <0x20 0x15c>; #clock-cells = <2>; }; l4sec_clkctrl: clock@1a0 { - compatible = "ti,clkctrl-l4sec", "ti,clkctrl"; + compatible = "ti,clkctrl"; + clock-output-names = "l4sec_clkctrl"; reg = <0x1a0 0x3c>; #clock-cells = <2>; }; @@ -1140,6 +1285,7 @@ dss_cm: dss_cm@1400 { compatible = "ti,omap4-cm"; + clock-output-names = "dss_cm"; reg = <0x1400 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1147,6 +1293,7 @@ dss_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "dss_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1154,6 +1301,7 @@ gpu_cm: gpu_cm@1500 { compatible = "ti,omap4-cm"; + clock-output-names = "gpu_cm"; reg = <0x1500 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1161,6 +1309,7 @@ gpu_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "gpu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1168,6 +1317,7 @@ l3init_cm: l3init_cm@1600 { compatible = "ti,omap4-cm"; + clock-output-names = "l3init_cm"; reg = <0x1600 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1175,6 +1325,7 @@ l3init_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3init_clkctrl"; reg = <0x20 0xd4>; #clock-cells = <2>; }; @@ -1184,6 +1335,7 @@ &prm { wkupaon_cm: wkupaon_cm@1900 { compatible = "ti,omap4-cm"; + clock-output-names = "wkupaon_cm"; reg = <0x1900 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1191,6 +1343,7 @@ wkupaon_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "wkupaon_clkctrl"; reg = <0x20 0x5c>; #clock-cells = <2>; }; @@ -1201,6 +1354,7 @@ fref_xtal_ck: fref_xtal_ck { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "fref_xtal_ck"; clocks = <&sys_clkin>; ti,bit-shift = <28>; reg = <0x14>; diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi index 90846a7655b4..dde4364892bf 100644 --- a/arch/arm/boot/dts/ox820.dtsi +++ b/arch/arm/boot/dts/ox820.dtsi @@ -287,7 +287,7 @@ clocks = <&armclk>; }; - gic: gic@1000 { + gic: interrupt-controller@1000 { compatible = "arm,arm11mp-gic"; interrupt-controller; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi index a248bf038033..5f8300e356ad 100644 --- a/arch/arm/boot/dts/pxa25x.dtsi +++ b/arch/arm/boot/dts/pxa25x.dtsi @@ -38,9 +38,12 @@ compatible = "marvell,pdma-1.0"; reg = <0x40000000 0x10000>; interrupts = <25>; - #dma-channels = <16>; #dma-cells = <2>; + /* For backwards compatibility: */ + #dma-channels = <16>; + dma-channels = <16>; #dma-requests = <40>; + dma-requests = <40>; status = "okay"; }; diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index ccbecad9c5c7..a2cbfb3be609 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -12,9 +12,12 @@ compatible = "marvell,pdma-1.0"; reg = <0x40000000 0x10000>; interrupts = <25>; - #dma-channels = <32>; #dma-cells = <2>; + /* For backwards compatibility: */ + #dma-channels = <32>; + dma-channels = <32>; #dma-requests = <75>; + dma-requests = <75>; status = "okay"; }; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index d19674812cd2..f9c216f91865 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -122,9 +122,12 @@ compatible = "marvell,pdma-1.0"; reg = <0x40000000 0x10000>; interrupts = <25>; - #dma-channels = <32>; #dma-cells = <2>; + /* For backwards compatibility: */ + #dma-channels = <32>; + dma-channels = <32>; #dma-requests = <100>; + dma-requests = <100>; status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts new file mode 100644 index 000000000000..ace8cea27949 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts @@ -0,0 +1,294 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz> + */ + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "qcom-pm8226.dtsi" + +/ { + model = "ASUS ZenWatch 2"; + compatible = "asus,sparrow", "qcom,apq8026"; + chassis-type = "watch"; + qcom,msm-id = <199 0x20000>; + qcom,board-id = <8 3005>; + + reserved-memory { + sbl_region: sbl@2f00000 { + reg = <0x02f00000 0x100000>; + no-map; + }; + external_image_region: external-image@3100000 { + reg = <0x3100000 0x200000>; + no-map; + }; + peripheral_region: peripheral@3300000 { + reg = <0x3300000 0x600000>; + no-map; + }; + adsp_region: adsp@3900000 { + reg = <0x3900000 0x1400000>; + no-map; + }; + modem_region: modem@4d00000 { + reg = <0x4d00000 0x1b00000>; + no-map; + }; + modem_efs_region: modem-efs@7f00000 { + reg = <0x7f00000 0x100000>; + no-map; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_default_state>; + }; +}; + +&blsp1_uart1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart1_default_state>; + + bluetooth { + compatible = "brcm,bcm43430a1-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_state>; + + host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>; + }; +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + pm8226-regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l7: l7 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + }; + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + pm8226_l15: l15 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; +}; + +&sdhc_3 { + status = "okay"; + + max-frequency = <100000000>; + non-removable; + + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8226_l6>; + + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_hostwake_default_state>; + }; +}; + +&smbb { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <350000>; + qcom,fast-charge-safe-voltage = <4430000>; + qcom,fast-charge-high-threshold-voltage = <4400000>; + qcom,auto-recharge-threshold-voltage = <4300000>; + qcom,minimum-input-voltage = <4400000>; +}; + +&tlmm { + blsp1_uart1_default_state: blsp1-uart1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + drive-strength = <8>; + bias-disable; + }; + + bluetooth_default_state: bluetooth-default-state { + pins = "gpio48", "gpio61"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + input-enable; + }; + + wlan_hostwake_default_state: wlan-hostwake-default-state { + pins = "gpio46"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + wlan_regulator_default_state: wlan-regulator-default-state { + pins = "gpio35"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&usb { + status = "okay"; + extcon = <&smbb>; + dr_mode = "peripheral"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi index cbe42c4153a0..b4d286a6fab1 100644 --- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi @@ -76,7 +76,7 @@ pinconf { pins = "gpio20", "gpio21"; drive-strength = <2>; - bias-disable = <0>; + bias-disable; }; }; @@ -116,7 +116,7 @@ pinconf { pins = "gpio24", "gpio25"; drive-strength = <2>; - bias-disable = <0>; + bias-disable; }; }; @@ -141,7 +141,7 @@ pinconf { pins = "gpio8", "gpio9"; drive-strength = <2>; - bias-disable = <0>; + bias-disable; }; }; @@ -166,7 +166,7 @@ pinconf { pins = "gpio12", "gpio13"; drive-strength = <2>; - bias-disable = <0>; + bias-disable; }; }; @@ -229,7 +229,7 @@ pinconf { pins = "gpio16", "gpio17"; drive-strength = <2>; - bias-disable = <0>; + bias-disable; }; }; @@ -282,7 +282,7 @@ pinconf { pins = "gpio84", "gpio85"; drive-strength = <2>; - bias-disable = <0>; + bias-disable; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts index 0cee62c7b8b0..0cee62c7b8b0 100644 --- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts +++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index a1c8ae516d21..34c0ba7fa358 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -227,7 +227,7 @@ smd { compatible = "qcom,smd"; - modem@0 { + modem-edge { interrupts = <0 37 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&l2cc 8 3>; @@ -236,7 +236,7 @@ status = "disabled"; }; - q6@1 { + q6-edge { interrupts = <0 90 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&l2cc 8 15>; @@ -245,7 +245,7 @@ status = "disabled"; }; - dsps@3 { + dsps-edge { interrupts = <0 138 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&sps_sic_non_secure 0x4080 0>; @@ -254,7 +254,7 @@ status = "disabled"; }; - riva@6 { + riva-edge { interrupts = <0 198 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&l2cc 8 25>; @@ -1040,7 +1040,7 @@ }; /* Temporary fixed regulator */ - sdcc1bam:dma@12402000{ + sdcc1bam: dma-controller@12402000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12402000 0x8000>; interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; @@ -1050,7 +1050,7 @@ qcom,ee = <0>; }; - sdcc3bam:dma@12182000{ + sdcc3bam: dma-controller@12182000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12182000 0x8000>; interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; @@ -1060,7 +1060,7 @@ qcom,ee = <0>; }; - sdcc4bam:dma@121c2000{ + sdcc4bam: dma-controller@121c2000{ compatible = "qcom,bam-v1.3.0"; reg = <0x121c2000 0x8000>; interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; @@ -1548,7 +1548,7 @@ qcom,mmio = <&riva>; - bt { + bluetooth { compatible = "qcom,wcnss-bt"; }; diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index 83793b835d40..3051a861ff0c 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -16,331 +16,293 @@ chosen { stdout-path = "serial0:115200n8"; }; +}; + +&blsp1_uart2 { + status = "okay"; +}; - soc { - serial@f991e000 { +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <200000>; + + eeprom: eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + read-only; + }; +}; + +&otg { + status = "okay"; + + phys = <&usb_hs2_phy>; + phy-select = <&tcsr 0xb000 1>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@b { status = "okay"; + v3p3-supply = <&pm8941_l24>; + v1p8-supply = <&pm8941_l6>; + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x63>; + }; + }; +}; + +&rpm_requests { + pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; }; - sdhci@f9824900 { - bus-width = <8>; - non-removable; - status = "okay"; + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; + pm8841_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; + pm8841_s4: s4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; }; + }; - sdhci@f98a4900 { - cd-gpios = <&msmgpio 62 0x1>; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; - bus-width = <4>; - status = "okay"; + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vin_5vs-supply = <&pm8941_5v>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; }; - usb@f9a55000 { - status = "okay"; - phys = <&usb_hs2_phy>; - phy-select = <&tcsr 0xb000 1>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - hnp-disable; - srp-disable; - adp-disable; - ulpi { - phy@b { - status = "okay"; - v3p3-supply = <&pm8941_l24>; - v1p8-supply = <&pm8941_l6>; - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x63>; - }; - }; - }; - - - pinctrl@fd510000 { - i2c11_pins: i2c11 { - mux { - pins = "gpio83", "gpio84"; - function = "blsp_i2c11"; - }; - }; - - spi8_default: spi8_default { - mosi { - pins = "gpio45"; - function = "blsp_spi8"; - }; - miso { - pins = "gpio46"; - function = "blsp_spi8"; - }; - cs { - pins = "gpio47"; - function = "blsp_spi8"; - }; - clk { - pins = "gpio48"; - function = "blsp_spi8"; - }; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - }; - - i2c@f9967000 { - status = "okay"; - clock-frequency = <200000>; - pinctrl-0 = <&i2c11_pins>; - pinctrl-names = "default"; + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - eeprom: eeprom@52 { - compatible = "atmel,24c128"; - reg = <0x52>; - pagesize = <32>; - read-only; - }; + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; }; }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 62 0x1>; + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; +}; + +&tlmm { + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s4 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vin_5vs-supply = <&pm8941_5v>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-boot-on; - regulator-system-load = <200000>; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; + cd { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 52240fc7a1a6..da50a1a0197f 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -470,7 +470,7 @@ qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; - rpm_requests { + rpm-requests { compatible = "qcom,rpm-apq8084"; qcom,smd-channels = "rpm_requests"; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi index 0c10d9e096db..03bb9e1768c4 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi @@ -64,7 +64,7 @@ }; }; - blsp_dma: dma@7884000 { + blsp_dma: dma-controller@7884000 { status = "okay"; }; @@ -89,7 +89,7 @@ status = "okay"; }; - cryptobam: dma@8e04000 { + cryptobam: dma-controller@8e04000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts index a7b1201dd614..79b0c6318e52 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts @@ -8,7 +8,7 @@ compatible = "qcom,ipq4019-dk04.1-c1", "qcom,ipq4019"; soc { - dma@7984000 { + dma-controller@7984000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi index 7a337dc08741..faeaa6bf0def 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi @@ -79,7 +79,7 @@ status = "okay"; }; - dma@7884000 { + dma-controller@7884000 { status = "okay"; }; @@ -89,7 +89,7 @@ status = "okay"; cs-gpios = <&tlmm 12 0>; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; reg = <0>; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts index 06f9f2cb2fe9..d596dd1180ae 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts @@ -52,7 +52,7 @@ status = "okay"; cs-gpios = <&tlmm 12 0>; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; reg = <0>; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi index 94872518b5a2..0107f552f520 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi @@ -52,7 +52,7 @@ status = "okay"; }; - dma@7884000 { + dma-controller@7884000 { status = "okay"; }; @@ -62,7 +62,7 @@ status = "okay"; }; - dma@7984000 { + dma-controller@7984000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index a9d0566a3190..c5da723f7674 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -233,7 +233,7 @@ status = "disabled"; }; - blsp_dma: dma@7884000 { + blsp_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x23000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; @@ -253,8 +253,8 @@ clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; - dmas = <&blsp_dma 5>, <&blsp_dma 4>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -267,8 +267,8 @@ clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; - dmas = <&blsp_dma 7>, <&blsp_dma 6>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -276,13 +276,13 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b7000 0x600>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; - dmas = <&blsp_dma 9>, <&blsp_dma 8>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -290,17 +290,17 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b8000 0x600>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; - dmas = <&blsp_dma 11>, <&blsp_dma 10>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; status = "disabled"; }; - cryptobam: dma@8e04000 { + cryptobam: dma-controller@8e04000 { compatible = "qcom,bam-v1.7.0"; reg = <0x08e04000 0x20000>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; @@ -382,8 +382,8 @@ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 1>, <&blsp_dma 0>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 0>, <&blsp_dma 1>; + dma-names = "tx", "rx"; }; blsp1_uart2: serial@78b0000 { @@ -394,8 +394,8 @@ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 3>, <&blsp_dma 2>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 2>, <&blsp_dma 3>; + dma-names = "tx", "rx"; }; watchdog: watchdog@b017000 { @@ -471,7 +471,7 @@ status = "disabled"; }; - qpic_bam: dma@7984000 { + qpic_bam: dma-controller@7984000 { compatible = "qcom,bam-v1.7.0"; reg = <0x7984000 0x1a000>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; @@ -646,7 +646,7 @@ clocks = <&gcc GCC_USB3_MASTER_CLK>, <&gcc GCC_USB3_SLEEP_CLK>, <&gcc GCC_USB3_MOCK_UTMI_CLK>; - clock-names = "master", "sleep", "mock_utmi"; + clock-names = "core", "sleep", "mock_utmi"; ranges; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi index 65330065390a..5c802b99e15f 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi @@ -36,7 +36,7 @@ cs-gpios = <&qcom_pinmux 20 0>; - flash: m25p80@0 { + flash: flash@0 { compatible = "s25fl256s1"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 996f4458d9fc..808ea1862283 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -298,13 +298,13 @@ }; clocks { - cxo_board { + cxo_board: cxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; }; - pxo_board { + pxo_board: pxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; @@ -736,7 +736,9 @@ }; gcc: clock-controller@900000 { - compatible = "qcom,gcc-ipq8064"; + compatible = "qcom,gcc-ipq8064", "syscon"; + clocks = <&pxo_board>, <&cxo_board>; + clock-names = "pxo", "cxo"; reg = <0x00900000 0x4000>; #clock-cells = <1>; #reset-cells = <1>; @@ -972,7 +974,7 @@ snps,axi-config = <&stmmac_axi_setup>; snps,pbl = <32>; - snps,aal = <1>; + snps,aal; qcom,nss-common = <&nss_common>; qcom,qsgmii-csr = <&qsgmii_csr>; @@ -996,7 +998,7 @@ snps,axi-config = <&stmmac_axi_setup>; snps,pbl = <32>; - snps,aal = <1>; + snps,aal; qcom,nss-common = <&nss_common>; qcom,qsgmii-csr = <&qsgmii_csr>; @@ -1020,7 +1022,7 @@ snps,axi-config = <&stmmac_axi_setup>; snps,pbl = <32>; - snps,aal = <1>; + snps,aal; qcom,nss-common = <&nss_common>; qcom,qsgmii-csr = <&qsgmii_csr>; @@ -1044,7 +1046,7 @@ snps,axi-config = <&stmmac_axi_setup>; snps,pbl = <32>; - snps,aal = <1>; + snps,aal; qcom,nss-common = <&nss_common>; qcom,qsgmii-csr = <&qsgmii_csr>; @@ -1155,7 +1157,7 @@ regulator-always-on; }; - sdcc1bam: dma@12402000 { + sdcc1bam: dma-controller@12402000 { compatible = "qcom,bam-v1.3.0"; reg = <0x12402000 0x8000>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; @@ -1165,7 +1167,7 @@ qcom,ee = <0>; }; - sdcc3bam: dma@12182000 { + sdcc3bam: dma-controller@12182000 { compatible = "qcom,bam-v1.3.0"; reg = <0x12182000 0x8000>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index 4d4f37cebf21..8f0752ce1c7b 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -330,7 +330,7 @@ }; }; - sdcc1bam: dma@12182000{ + sdcc1bam: dma-controller@12182000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12182000 0x8000>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; @@ -340,7 +340,7 @@ qcom,ee = <0>; }; - sdcc2bam: dma@12142000{ + sdcc2bam: dma-controller@12142000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12142000 0x8000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi index 85e56992d2d0..28eca15b5712 100644 --- a/arch/arm/boot/dts/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi @@ -182,6 +182,15 @@ status = "disabled"; }; + blsp1_uart1: serial@f991d000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991d000 0x1000>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp1_uart3: serial@f991f000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991f000 0x1000>; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index a258abb23a64..47b97daecef1 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -212,6 +212,7 @@ ranges; syscon-tcsr = <&tcsr>; + status = "disabled"; gsbi8_i2c: i2c@19880000 { compatible = "qcom,i2c-qup-v1.1.1"; diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts deleted file mode 100644 index 6d77e0f8ca4d..000000000000 --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts +++ /dev/null @@ -1,409 +0,0 @@ -#include "qcom-msm8974.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> - - -/ { - model = "Fairphone 2"; - compatible = "fairphone,fp2", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_CAMERA>; - wakeup-source; - debounce-interval = <15>; - }; - - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEDOWN>; - wakeup-source; - debounce-interval = <15>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEUP>; - wakeup-source; - debounce-interval = <15>; - }; - }; - - vibrator { - compatible = "gpio-vibrator"; - enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>; - vcc-supply = <&pm8941_l18>; - }; - - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <3350000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; -}; - -&soc { - serial@f991e000 { - status = "okay"; - }; - - remoteproc@fb21b000 { - status = "okay"; - - vddmx-supply = <&pm8841_s1>; - vddcx-supply = <&pm8841_s2>; - - pinctrl-names = "default"; - pinctrl-0 = <&wcnss_pin_a>; - - smd-edge { - qcom,remote-pid = <4>; - label = "pronto"; - - wcnss { - status = "okay"; - }; - }; - }; - - pinctrl@fd510000 { - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - wcnss_pin_a: wcnss-pin-active { - wlan { - pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; - function = "wlan"; - - drive-strength = <6>; - bias-pull-down; - }; - - bt { - pins = "gpio35", "gpio43", "gpio44"; - function = "bt"; - - drive-strength = <2>; - bias-pull-down; - }; - - fm { - pins = "gpio41", "gpio42"; - function = "fm"; - - drive-strength = <2>; - bias-pull-down; - }; - }; - }; - - sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhci@f98a4900 { - status = "okay"; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - bus-width = <4>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>; - }; - - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; - - imem@fe805000 { - status = "okay"; - - reboot-mode { - mode-normal = <0x77665501>; - mode-bootloader = <0x77665500>; - mode-recovery = <0x77665502>; - }; - }; -}; - -&spmi_bus { - pm8941@0 { - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio1", "gpio2", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index 069136170198..9493886a5c0d 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -2,7 +2,6 @@ #include "qcom-msm8974.dtsi" #include "qcom-pm8841.dtsi" #include "qcom-pm8941.dtsi" -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> @@ -12,213 +11,31 @@ aliases { serial0 = &blsp1_uart1; - serial1 = &blsp2_uart10; + serial1 = &blsp2_uart4; }; chosen { stdout-path = "serial0:115200n8"; }; - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - s4 { - regulator-min-microvolt = <815000>; - regulator-max-microvolt = <900000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; }; }; @@ -229,7 +46,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 26 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -237,525 +54,570 @@ }; }; -&soc { - serial@f991d000 { - status = "okay"; +&blsp1_i2c1 { + status = "okay"; + clock-frequency = <100000>; + + charger: bq24192@6b { + compatible = "ti,bq24192"; + reg = <0x6b>; + interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>; + + omit-battery-class; + + usb_otg_vbus: usb-otg-vbus { }; }; - pinctrl@fd510000 { - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; + fuelgauge: max17048@36 { + compatible = "maxim,max17048"; + reg = <0x36>; - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x4d>; - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <6>; - bias-disable; - }; + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; + pinctrl-names = "default"; + pinctrl-0 = <&fuelgauge_pin>; - i2c1_pins: i2c1 { - mux { - pins = "gpio2", "gpio3"; - function = "blsp_i2c1"; + maxim,alert-low-soc-level = <2>; + }; +}; - drive-strength = <2>; - bias-disable; - }; - }; +&blsp1_i2c2 { + status = "okay"; + clock-frequency = <355000>; - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; + synaptics@70 { + compatible = "syna,rmi4-i2c"; + reg = <0x70>; - drive-strength = <2>; - bias-disable; - }; - }; + interrupts-extended = <&tlmm 5 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; - i2c3_pins: i2c3 { - mux { - pins = "gpio10", "gpio11"; - function = "blsp_i2c3"; - drive-strength = <2>; - bias-disable; - }; - }; + pinctrl-names = "default"; + pinctrl-0 = <&touch_pin>; - i2c11_pins: i2c11 { - mux { - pins = "gpio83", "gpio84"; - function = "blsp_i2c11"; + #address-cells = <1>; + #size-cells = <0>; - drive-strength = <2>; - bias-disable; - }; + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; }; - i2c12_pins: i2c12 { - mux { - pins = "gpio87", "gpio88"; - function = "blsp_i2c12"; - drive-strength = <2>; - bias-disable; - }; + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; }; + }; +}; - mpu6515_pin: mpu6515 { - irq { - pins = "gpio73"; - function = "gpio"; - bias-disable; - input-enable; - }; - }; +&blsp1_i2c3 { + status = "okay"; + clock-frequency = <100000>; + + avago_apds993@39 { + compatible = "avago,apds9930"; + reg = <0x39>; + interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l17>; + vddio-supply = <&pm8941_lvs1>; + led-max-microamp = <100000>; + amstaos,proximity-diodes = <0>; + }; +}; - touch_pin: touch { - int { - pins = "gpio5"; - function = "gpio"; +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; - drive-strength = <2>; - bias-disable; - input-enable; - }; + led-controller@38 { + compatible = "ti,lm3630a"; + status = "okay"; + reg = <0x38>; - reset { - pins = "gpio8"; - function = "gpio"; + #address-cells = <1>; + #size-cells = <0>; - drive-strength = <2>; - bias-pull-up; - }; + led@0 { + reg = <0>; + led-sources = <0 1>; + label = "lcd-backlight"; + default-brightness = <200>; }; + }; +}; - panel_pin: panel { - te { - pins = "gpio12"; - function = "mdp_vsync"; +&blsp2_i2c6 { + status = "okay"; + clock-frequency = <100000>; - drive-strength = <2>; - bias-disable; - }; - }; + mpu6515@68 { + compatible = "invensense,mpu6515"; + reg = <0x68>; + interrupts-extended = <&tlmm 73 IRQ_TYPE_EDGE_FALLING>; + vddio-supply = <&pm8941_lvs1>; - bt_pin: bt { - hostwake { - pins = "gpio42"; - function = "gpio"; - }; + pinctrl-names = "default"; + pinctrl-0 = <&mpu6515_pin>; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1"; - devwake { - pins = "gpio62"; - function = "gpio"; + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + ak8963@f { + compatible = "asahi-kasei,ak8963"; + reg = <0x0f>; + gpios = <&tlmm 67 0>; + vid-supply = <&pm8941_lvs1>; + vdd-supply = <&pm8941_l17>; }; - shutdown { - pins = "gpio41"; - function = "gpio"; + bmp280@76 { + compatible = "bosch,bmp280"; + reg = <0x76>; + vdda-supply = <&pm8941_lvs1>; + vddd-supply = <&pm8941_l17>; }; }; + }; +}; - blsp2_uart10_pin_a: blsp2-uart10-pin-active { - tx { - pins = "gpio53"; - function = "blsp_uart10"; +&blsp1_uart1 { + status = "okay"; +}; - drive-strength = <2>; - bias-disable; - }; +&blsp2_uart4 { + status = "okay"; - rx { - pins = "gpio54"; - function = "blsp_uart10"; + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; - drive-strength = <2>; - bias-pull-up; - }; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pin>; + + host-wakeup-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; + }; +}; - cts { - pins = "gpio55"; - function = "blsp_uart10"; +&dsi0 { + status = "okay"; - drive-strength = <2>; - bias-pull-up; - }; + vdda-supply = <&pm8941_l2>; + vdd-supply = <&pm8941_lvs3>; + vddio-supply = <&pm8941_l12>; - rts { - pins = "gpio56"; - function = "blsp_uart10"; + panel: panel@0 { + reg = <0>; + compatible = "lg,acx467akm-7"; - drive-strength = <2>; - bias-disable; + pinctrl-names = "default"; + pinctrl-0 = <&panel_pin>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; }; +}; - sdhci@f9824900 { - status = "okay"; +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; +&dsi0_phy { + status = "okay"; - bus-width = <8>; - non-removable; + vddio-supply = <&pm8941_l12>; +}; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; +&mdss { + status = "okay"; +}; - sdhci@f98a4900 { - status = "okay"; +&otg { + status = "okay"; - max-frequency = <100000000>; - bus-width = <4>; - non-removable; - vmmc-supply = <&vreg_wlan>; - vqmmc-supply = <&pm8941_s3>; + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>; + extcon = <&charger>, <&usb_id>; + vbus-supply = <&usb_otg_vbus>; - #address-cells = <1>; - #size-cells = <0>; + hnp-disable; + srp-disable; + adp-disable; - bcrmf@1 { - compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; - reg = <1>; + ulpi { + phy@a { + status = "okay"; - brcm,drive-strength = <10>; + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; - pinctrl-names = "default"; - pinctrl-0 = <&wlan_sleep_clk_pin>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; }; }; +}; - gpio-keys { - compatible = "gpio-keys"; +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio3"; + function = "normal"; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - }; + fuelgauge_pin: fuelgauge-int { + pins = "gpio9"; + function = "normal"; - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - }; + bias-disable; + input-enable; + power-source = <PM8941_GPIO_S3>; }; - serial@f9960000 { - status = "okay"; + wlan_sleep_clk_pin: wl-sleep-clk { + pins = "gpio16"; + function = "func2"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp2_uart10_pin_a>; + output-high; + power-source = <PM8941_GPIO_S3>; + }; - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <3000000>; + wlan_regulator_pin: wl-reg-active { + pins = "gpio17"; + function = "normal"; - pinctrl-names = "default"; - pinctrl-0 = <&bt_pin>; + bias-disable; + power-source = <PM8941_GPIO_S3>; + }; - host-wakeup-gpios = <&msmgpio 42 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&msmgpio 62 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&msmgpio 41 GPIO_ACTIVE_HIGH>; - }; + otg { + gpio-hog; + gpios = <35 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "otg-gpio"; }; +}; - i2c@f9967000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c11_pins>; - clock-frequency = <355000>; - qcom,src-freq = <50000000>; +&rpm_requests { + pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; - led-controller@38 { - compatible = "ti,lm3630a"; - status = "okay"; - reg = <0x38>; + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; - #address-cells = <1>; - #size-cells = <0>; + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; - led@0 { - reg = <0>; - led-sources = <0 1>; - label = "lcd-backlight"; - default-brightness = <200>; - }; + pm8841_s3: s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; }; - }; - i2c@f9968000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c12_pins>; - clock-frequency = <100000>; - qcom,src-freq = <50000000>; - - mpu6515@68 { - compatible = "invensense,mpu6515"; - reg = <0x68>; - interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>; - vddio-supply = <&pm8941_lvs1>; - - pinctrl-names = "default"; - pinctrl-0 = <&mpu6515_pin>; - - mount-matrix = "0", "-1", "0", - "-1", "0", "0", - "0", "0", "1"; - - i2c-gate { - #address-cells = <1>; - #size-cells = <0>; - ak8963@f { - compatible = "asahi-kasei,ak8963"; - reg = <0x0f>; - gpios = <&msmgpio 67 0>; - vid-supply = <&pm8941_lvs1>; - vdd-supply = <&pm8941_l17>; - }; - - bmp280@76 { - compatible = "bosch,bmp280"; - reg = <0x76>; - vdda-supply = <&pm8941_lvs1>; - vddd-supply = <&pm8941_l17>; - }; - }; + pm8841_s4: s4 { + regulator-min-microvolt = <815000>; + regulator-max-microvolt = <900000>; }; }; - i2c@f9923000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - clock-frequency = <100000>; - qcom,src-freq = <50000000>; + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; - charger: bq24192@6b { - compatible = "ti,bq24192"; - reg = <0x6b>; - interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>; + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; - omit-battery-class; + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; - usb_otg_vbus: usb-otg-vbus { }; + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; }; - fuelgauge: max17048@36 { - compatible = "maxim,max17048"; - reg = <0x36>; + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; - maxim,double-soc; - maxim,rcomp = /bits/ 8 <0x4d>; + pm8941_l3: l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; - interrupt-parent = <&msmgpio>; - interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&fuelgauge_pin>; + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - maxim,alert-low-soc-level = <2>; + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; }; - }; - i2c@f9924000 { - status = "okay"; + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; - clock-frequency = <355000>; - qcom,src-freq = <50000000>; + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; - synaptics@70 { - compatible = "syna,rmi4-i2c"; - reg = <0x70>; + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; - interrupts-extended = <&msmgpio 5 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&pm8941_l22>; - vio-supply = <&pm8941_lvs3>; + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&touch_pin>; + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; - #address-cells = <1>; - #size-cells = <0>; + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - rmi4-f12@12 { - reg = <0x12>; - syna,sensor-type = <1>; - }; + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; }; - }; - i2c@f9925000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins>; - clock-frequency = <100000>; - qcom,src-freq = <50000000>; - - avago_apds993@39 { - compatible = "avago,apds9930"; - reg = <0x39>; - interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&pm8941_l17>; - vddio-supply = <&pm8941_lvs1>; - led-max-microamp = <100000>; - amstaos,proximity-diodes = <0>; + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; }; - }; - usb@f9a55000 { - status = "okay"; + pm8941_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; + pm8941_l19: l19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; - extcon = <&charger>, <&usb_id>; - vbus-supply = <&usb_otg_vbus>; + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; - hnp-disable; - srp-disable; - adp-disable; + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; - ulpi { - phy@a { - status = "okay"; + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; }; + + pm8941_lvs1: lvs1 {}; + pm8941_lvs3: lvs3 {}; }; +}; - mdss@fd900000 { - status = "okay"; +&sdhc_1 { + status = "okay"; - mdp@fd900000 { - status = "okay"; - }; + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; - dsi@fd922800 { - status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; - vdda-supply = <&pm8941_l2>; - vdd-supply = <&pm8941_lvs3>; - vddio-supply = <&pm8941_l12>; +&sdhc_2 { + status = "okay"; - #address-cells = <1>; - #size-cells = <0>; + max-frequency = <100000000>; + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8941_s3>; + non-removable; - ports { - port@1 { - endpoint { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; - panel: panel@0 { - reg = <0>; - compatible = "lg,acx467akm-7"; + bcrmf@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&panel_pin>; + brcm,drive-strength = <10>; - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin>; + }; +}; + +&tlmm { + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; }; - dsi-phy@fd922a00 { - status = "okay"; + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; - vddio-supply = <&pm8941_l12>; + sdc2_on: sdc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; }; }; -}; -&spmi_bus { - pm8941@0 { - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio3"; - function = "normal"; + mpu6515_pin: mpu6515 { + pins = "gpio73"; + function = "gpio"; + bias-disable; + input-enable; + }; - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; + touch_pin: touch { + int { + pins = "gpio5"; + function = "gpio"; - fuelgauge_pin: fuelgauge-int { - pins = "gpio9"; - function = "normal"; + drive-strength = <2>; + bias-disable; + input-enable; + }; - bias-disable; - input-enable; - power-source = <PM8941_GPIO_S3>; - }; + reset { + pins = "gpio8"; + function = "gpio"; - wlan_sleep_clk_pin: wl-sleep-clk { - pins = "gpio16"; - function = "func2"; + drive-strength = <2>; + bias-pull-up; + }; + }; - output-high; - power-source = <PM8941_GPIO_S3>; - }; + panel_pin: panel { + pins = "gpio12"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; - wlan_regulator_pin: wl-reg-active { - pins = "gpio17"; - function = "normal"; + bt_pin: bt { + hostwake { + pins = "gpio42"; + function = "gpio"; + }; - bias-disable; - power-source = <PM8941_GPIO_S3>; - }; + devwake { + pins = "gpio62"; + function = "gpio"; + }; - otg { - gpio-hog; - gpios = <35 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "otg-gpio"; - }; + shutdown { + pins = "gpio41"; + function = "gpio"; }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts deleted file mode 100644 index 96e1c978b878..000000000000 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ /dev/null @@ -1,908 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-msm8974pro.dtsi" -#include "qcom-pma8084.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Samsung Galaxy S5"; - compatible = "samsung,klte", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart1; - mmc0 = &sdhc_1; /* SDC1 eMMC slot */ - mmc1 = &sdhc_2; /* SDC2 SD card slot */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - smd { - rpm { - rpm_requests { - pma8084-regulators { - compatible = "qcom,rpm-pma8084-regulators"; - status = "okay"; - - pma8084_s1: s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - regulator-always-on; - }; - - pma8084_s2: s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - pma8084_s3: s3 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - pma8084_s4: s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_s5: s5 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - }; - - pma8084_s6: s6 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - pma8084_l1: l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - pma8084_l2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - pma8084_l3: l3 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1200000>; - }; - - pma8084_l4: l4 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1225000>; - }; - - pma8084_l5: l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l6: l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l7: l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l8: l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l9: l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pma8084_l10: l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pma8084_l11: l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - pma8084_l12: l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - pma8084_l13: l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pma8084_l14: l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l15: l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - pma8084_l16: l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - pma8084_l17: l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - pma8084_l18: l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - pma8084_l19: l19 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - pma8084_l20: l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - pma8084_l21: l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - pma8084_l22: l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - pma8084_l23: l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - pma8084_l24: l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - pma8084_l25: l25 { - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2100000>; - }; - - pma8084_l26: l26 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2050000>; - }; - - pma8084_l27: l27 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1225000>; - }; - - pma8084_lvs1: lvs1 {}; - pma8084_lvs2: lvs2 {}; - pma8084_lvs3: lvs3 {}; - pma8084_lvs4: lvs4 {}; - - pma8084_5vs1: 5vs1 {}; - }; - }; - }; - }; - - i2c-gpio-touchkey { - compatible = "i2c-gpio"; - #address-cells = <1>; - #size-cells = <0>; - sda-gpios = <&msmgpio 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_touchkey_pins>; - - touchkey@20 { - compatible = "cypress,tm2-touchkey"; - reg = <0x20>; - - interrupt-parent = <&pma8084_gpios>; - interrupts = <6 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&touchkey_pin>; - - vcc-supply = <&max77826_ldo15>; - vdd-supply = <&pma8084_l19>; - - linux,keycodes = <KEY_APPSELECT KEY_BACK>; - }; - }; - - i2c-gpio-led { - compatible = "i2c-gpio"; - #address-cells = <1>; - #size-cells = <0>; - scl-gpios = <&msmgpio 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&msmgpio 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_led_gpioex_pins>; - - i2c-gpio,delay-us = <2>; - - gpio_expander: gpio@20 { - compatible = "nxp,pcal6416"; - reg = <0x20>; - - gpio-controller; - #gpio-cells = <2>; - - vcc-supply = <&pma8084_s4>; - - pinctrl-names = "default"; - pinctrl-0 = <&gpioex_pin>; - - reset-gpios = <&msmgpio 145 GPIO_ACTIVE_LOW>; - }; - - led-controller@30 { - compatible = "panasonic,an30259a"; - reg = <0x30>; - - #address-cells = <1>; - #size-cells = <0>; - - led@1 { - reg = <1>; - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_RED>; - }; - - led@2 { - reg = <2>; - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_GREEN>; - }; - - led@3 { - reg = <3>; - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; - }; - }; - }; - - vreg_wlan: wlan-regulator { - compatible = "regulator-fixed"; - - regulator-name = "wl-reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vreg_panel: panel-regulator { - compatible = "regulator-fixed"; - - pinctrl-names = "default"; - pinctrl-0 = <&panel_en_pin>; - - regulator-name = "panel-vddr-reg"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - - gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - /delete-node/ vreg-boost; - - adsp-pil { - cx-supply = <&pma8084_s2>; - }; -}; - -&soc { - serial@f991e000 { - status = "okay"; - }; - - /* blsp2_uart8 */ - serial@f995e000 { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart8_pins_active>; - pinctrl-1 = <&blsp2_uart8_pins_sleep>; - - bluetooth { - compatible = "brcm,bcm43540-bt"; - max-speed = <3000000>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_pins>; - device-wakeup-gpios = <&msmgpio 91 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>; - interrupt-parent = <&msmgpio>; - interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wakeup"; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - volume-down { - label = "volume_down"; - gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - debounce-interval = <15>; - }; - - home-key { - label = "home_key"; - gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_HOMEPAGE>; - wakeup-source; - debounce-interval = <15>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - debounce-interval = <15>; - }; - }; - - pinctrl@fd510000 { - blsp2_uart8_pins_active: blsp2-uart8-pins-active { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "blsp_uart8"; - drive-strength = <8>; - bias-disable; - }; - - blsp2_uart8_pins_sleep: blsp2-uart8-pins-sleep { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - bt_pins: bt-pins { - hostwake { - pins = "gpio75"; - function = "gpio"; - drive-strength = <16>; - input-enable; - }; - - devwake { - pins = "gpio91"; - function = "gpio"; - drive-strength = <2>; - }; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <4>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <4>; - bias-pull-up; - }; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk-cmd-data { - pins = "gpio35", "gpio36", "gpio37", "gpio38", - "gpio39", "gpio40"; - function = "sdc3"; - drive-strength = <8>; - bias-disable; - }; - }; - - sdhc2_cd_pin: sdhc2-cd { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc3_pin_a: sdhc3-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <6>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c6_pins: i2c6 { - mux { - pins = "gpio29", "gpio30"; - function = "blsp_i2c6"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c12_pins: i2c12 { - mux { - pins = "gpio87", "gpio88"; - function = "blsp_i2c12"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c_touchkey_pins: i2c-touchkey { - mux { - pins = "gpio95", "gpio96"; - function = "gpio"; - input-enable; - bias-pull-up; - }; - }; - - i2c_led_gpioex_pins: i2c-led-gpioex { - mux { - pins = "gpio120", "gpio121"; - function = "gpio"; - input-enable; - bias-pull-down; - }; - }; - - gpioex_pin: gpioex { - res { - pins = "gpio145"; - function = "gpio"; - - bias-pull-up; - drive-strength = <2>; - }; - }; - - wifi_pin: wifi { - int { - pins = "gpio92"; - function = "gpio"; - - input-enable; - bias-pull-down; - }; - }; - - panel_te_pin: panel { - te { - pins = "gpio12"; - function = "mdp_vsync"; - - drive-strength = <2>; - bias-disable; - }; - }; - }; - - sdhc_1: sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pma8084_l20>; - vqmmc-supply = <&pma8084_s4>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhc_2: sdhci@f9864900 { - status = "okay"; - - max-frequency = <100000000>; - - vmmc-supply = <&pma8084_l21>; - vqmmc-supply = <&pma8084_l13>; - - bus-width = <4>; - - /* cd-gpio is intentionally disabled. If enabled, an SD card - * present during boot is not initialized correctly. Without - * cd-gpios the driver resorts to polling, so hotplug works. - */ - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>; - // cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; - }; - - sdhci@f98a4900 { - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - - max-frequency = <100000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc3_pin_a>; - - vmmc-supply = <&vreg_wlan>; - vqmmc-supply = <&pma8084_s4>; - - bus-width = <4>; - non-removable; - - wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - - interrupt-parent = <&msmgpio>; - interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wake"; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>; - }; - }; - - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - /*extcon = <&smbb>, <&usb_id>;*/ - /*vbus-supply = <&chg_otg>;*/ - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pma8084_l6>; - v3p3-supply = <&pma8084_l24>; - - /*extcon = <&smbb>;*/ - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; - - i2c@f9924000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - - touchscreen@20 { - compatible = "syna,rmi4-i2c"; - reg = <0x20>; - - interrupt-parent = <&pma8084_gpios>; - interrupts = <8 IRQ_TYPE_EDGE_FALLING>; - - vdd-supply = <&max77826_ldo13>; - vio-supply = <&pma8084_lvs2>; - - pinctrl-names = "default"; - pinctrl-0 = <&touch_pin>; - - syna,startup-delay-ms = <100>; - - #address-cells = <1>; - #size-cells = <0>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f12@12 { - reg = <0x12>; - syna,sensor-type = <1>; - }; - }; - }; - - i2c@f9928000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; - - pmic@60 { - reg = <0x60>; - compatible = "maxim,max77826"; - - regulators { - max77826_ldo1: LDO1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - max77826_ldo2: LDO2 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - max77826_ldo3: LDO3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - max77826_ldo4: LDO4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo5: LDO5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo6: LDO6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo7: LDO7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo8: LDO8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo9: LDO9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo10: LDO10 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2950000>; - }; - - max77826_ldo11: LDO11 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2950000>; - }; - - max77826_ldo12: LDO12 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo13: LDO13 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo14: LDO14 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo15: LDO15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_buck: BUCK { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - max77826_buckboost: BUCKBOOST { - regulator-min-microvolt = <3400000>; - regulator-max-microvolt = <3400000>; - }; - }; - }; - }; - - i2c@f9968000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c12_pins>; - - fuelgauge@36 { - compatible = "maxim,max17048"; - reg = <0x36>; - - maxim,double-soc; - maxim,rcomp = /bits/ 8 <0x56>; - - interrupt-parent = <&pma8084_gpios>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&fuelgauge_pin>; - }; - }; - - adreno@fdb00000 { - status = "ok"; - }; - - mdss@fd900000 { - status = "ok"; - - mdp@fd900000 { - status = "ok"; - }; - - dsi@fd922800 { - status = "ok"; - - vdda-supply = <&pma8084_l2>; - vdd-supply = <&pma8084_l22>; - vddio-supply = <&pma8084_l12>; - - #address-cells = <1>; - #size-cells = <0>; - - ports { - port@1 { - endpoint { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; - - panel: panel@0 { - reg = <0>; - compatible = "samsung,s6e3fa2"; - - pinctrl-names = "default"; - pinctrl-0 = <&panel_te_pin &panel_rst_pin>; - - iovdd-supply = <&pma8084_lvs4>; - vddr-supply = <&vreg_panel>; - - reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; - te-gpios = <&msmgpio 12 GPIO_ACTIVE_HIGH>; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; - }; - - dsi-phy@fd922a00 { - status = "ok"; - - vddio-supply = <&pma8084_l12>; - }; - }; - - remoteproc@fc880000 { - cx-supply = <&pma8084_s2>; - mss-supply = <&pma8084_s6>; - mx-supply = <&pma8084_s1>; - pll-supply = <&pma8084_l12>; - }; -}; - -&spmi_bus { - pma8084@0 { - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio3", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PMA8084_GPIO_S4>; - }; - - touchkey_pin: touchkey-int-pin { - pins = "gpio6"; - function = "normal"; - bias-disable; - input-enable; - power-source = <PMA8084_GPIO_S4>; - }; - - touch_pin: touchscreen-int-pin { - pins = "gpio8"; - function = "normal"; - bias-disable; - input-enable; - power-source = <PMA8084_GPIO_S4>; - }; - - panel_en_pin: panel-en-pin { - pins = "gpio14"; - function = "normal"; - bias-pull-up; - power-source = <PMA8084_GPIO_S4>; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - }; - - wlan_sleep_clk_pin: wlan-sleep-clk-pin { - pins = "gpio16"; - function = "func2"; - - output-high; - power-source = <PMA8084_GPIO_S4>; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; - }; - - panel_rst_pin: panel-rst-pin { - pins = "gpio17"; - function = "normal"; - bias-disable; - power-source = <PMA8084_GPIO_S4>; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - }; - - - fuelgauge_pin: fuelgauge-int-pin { - pins = "gpio21"; - function = "normal"; - bias-disable; - input-enable; - power-source = <PMA8084_GPIO_S4>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts deleted file mode 100644 index 79e2cfbbb1ba..000000000000 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts +++ /dev/null @@ -1,435 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-msm8974.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> - -/ { - model = "Sony Xperia Z1 Compact"; - compatible = "sony,xperia-amami", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - }; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA>; - }; - - camera-focus { - label = "camera_focus"; - gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA_FOCUS>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - }; - }; - - memory@0 { - reg = <0 0x40000000>, <0x40000000 0x40000000>; - device_type = "memory"; - }; - - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s4 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - s4 { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-boot-on; - regulator-system-load = <200000>; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; -}; - -&soc { - sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhci@f98a4900 { - status = "okay"; - - bus-width = <4>; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; - }; - - serial@f991e000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart2_pin_a>; - }; - - - pinctrl@fd510000 { - blsp1_uart2_pin_a: blsp1-uart2-pin-active { - rx { - pins = "gpio5"; - function = "blsp_uart2"; - - drive-strength = <2>; - bias-pull-up; - }; - - tx { - pins = "gpio4"; - function = "blsp_uart2"; - - drive-strength = <4>; - bias-disable; - }; - }; - - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - - drive-strength = <2>; - bias-disable; - }; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - }; - - dma-controller@f9944000 { - qcom,controlled-remotely; - }; - - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; -}; - -&spmi_bus { - pm8941@0 { - charger@1000 { - qcom,fast-charge-safe-current = <1300000>; - qcom,fast-charge-current-limit = <1300000>; - qcom,dc-current-limit = <1300000>; - qcom,fast-charge-safe-voltage = <4400000>; - qcom,fast-charge-high-threshold-voltage = <4350000>; - qcom,fast-charge-low-threshold-voltage = <3400000>; - qcom,auto-recharge-threshold-voltage = <4200000>; - qcom,minimum-input-voltage = <4300000>; - }; - - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio3", "gpio4", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; - }; - - coincell@2800 { - status = "okay"; - qcom,rset-ohms = <2100>; - qcom,vset-millivolts = <3000>; - }; - }; - - pm8941@1 { - wled@d800 { - status = "okay"; - - qcom,cs-out; - qcom,current-limit = <20>; - qcom,current-boost-limit = <805>; - qcom,switching-freq = <1600>; - qcom,ovp = <29>; - qcom,num-strings = <2>; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts deleted file mode 100644 index e66937e3f7dd..000000000000 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts +++ /dev/null @@ -1,723 +0,0 @@ -#include "qcom-msm8974pro.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> - -/ { - model = "Sony Xperia Z2 Tablet"; - compatible = "sony,xperia-castor", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart2; - serial1 = &blsp2_uart7; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - }; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA>; - }; - - camera-focus { - label = "camera_focus"; - gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA_FOCUS>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - }; - }; - - smd { - rpm { - rpm_requests { - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-system-load = <154000>; - }; - - s4 { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-boot-on; - regulator-allow-set-load; - regulator-system-load = <500000>; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; - - vreg_bl_vddio: lcd-backlight-vddio { - compatible = "regulator-fixed"; - regulator-name = "vreg_bl_vddio"; - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3150000>; - - gpio = <&msmgpio 69 0>; - enable-active-high; - - vin-supply = <&pm8941_s3>; - startup-delay-us = <70000>; - - pinctrl-names = "default"; - pinctrl-0 = <&lcd_backlight_en_pin_a>; - }; - - vreg_vsp: lcd-dcdc-regulator { - compatible = "regulator-fixed"; - regulator-name = "vreg_vsp"; - regulator-min-microvolt = <5600000>; - regulator-max-microvolt = <5600000>; - - gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&lcd_dcdc_en_pin_a>; - }; - - vreg_wlan: wlan-regulator { - compatible = "regulator-fixed"; - - regulator-name = "wl-reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_regulator_pin>; - }; -}; - -&soc { - sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhci@f9864900 { - status = "okay"; - - max-frequency = <100000000>; - non-removable; - vmmc-supply = <&vreg_wlan>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc3_pin_a>; - - #address-cells = <1>; - #size-cells = <0>; - - bcrmf@1 { - compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; - reg = <1>; - - brcm,drive-strength = <10>; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_sleep_clk_pin>; - }; - }; - - sdhci@f98a4900 { - status = "okay"; - - bus-width = <4>; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; - }; - - serial@f991e000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart2_pin_a>; - }; - - serial@f995d000 { - status = "ok"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp2_uart7_pin_a>; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <3000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_pin>, - <&bt_dev_wake_pin>, - <&bt_reg_on_pin>; - - host-wakeup-gpios = <&msmgpio 95 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&msmgpio 96 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>; - }; - }; - - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; - - pinctrl@fd510000 { - blsp1_uart2_pin_a: blsp1-uart2-pin-active { - rx { - pins = "gpio5"; - function = "blsp_uart2"; - - drive-strength = <2>; - bias-pull-up; - }; - - tx { - pins = "gpio4"; - function = "blsp_uart2"; - - drive-strength = <4>; - bias-disable; - }; - }; - - blsp2_uart7_pin_a: blsp2-uart7-pin-active { - tx { - pins = "gpio41"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio42"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-pull-up; - }; - - cts { - pins = "gpio43"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-pull-up; - }; - - rts { - pins = "gpio44"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c8_pins: i2c8 { - mux { - pins = "gpio47", "gpio48"; - function = "blsp_i2c8"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c11_pins: i2c11 { - mux { - pins = "gpio83", "gpio84"; - function = "blsp_i2c11"; - - drive-strength = <2>; - bias-disable; - }; - }; - - lcd_backlight_en_pin_a: lcd-backlight-vddio { - pins = "gpio69"; - drive-strength = <10>; - output-low; - bias-disable; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <6>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - sdhc3_pin_a: sdhc3-pin-active { - clk { - pins = "gpio40"; - function = "sdc3"; - - drive-strength = <10>; - bias-disable; - }; - - cmd { - pins = "gpio39"; - function = "sdc3"; - - drive-strength = <10>; - bias-pull-up; - }; - - data { - pins = "gpio35", "gpio36", "gpio37", "gpio38"; - function = "sdc3"; - - drive-strength = <10>; - bias-pull-up; - }; - }; - - ts_int_pin: synaptics { - pin { - pins = "gpio86"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - input-enable; - }; - }; - - bt_host_wake_pin: bt-host-wake { - pins = "gpio95"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - output-low; - }; - - bt_dev_wake_pin: bt-dev-wake { - pins = "gpio96"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c@f9964000 { - status = "okay"; - - clock-frequency = <355000>; - qcom,src-freq = <50000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c8_pins>; - - synaptics@2c { - compatible = "syna,rmi4-i2c"; - reg = <0x2c>; - - interrupt-parent = <&msmgpio>; - interrupts = <86 IRQ_TYPE_EDGE_FALLING>; - - #address-cells = <1>; - #size-cells = <0>; - - vdd-supply = <&pm8941_l22>; - vio-supply = <&pm8941_lvs3>; - - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_pin>; - - syna,startup-delay-ms = <10>; - - rmi-f01@1 { - reg = <0x1>; - syna,nosleep = <1>; - }; - - rmi-f11@11 { - reg = <0x11>; - syna,f11-flip-x = <1>; - syna,sensor-type = <1>; - }; - }; - }; - - i2c@f9967000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c11_pins>; - clock-frequency = <355000>; - qcom,src-freq = <50000000>; - - lp8566_wled: backlight@2c { - compatible = "ti,lp8556"; - reg = <0x2c>; - power-supply = <&vreg_bl_vddio>; - - bl-name = "backlight"; - dev-ctrl = /bits/ 8 <0x05>; - init-brt = /bits/ 8 <0x3f>; - rom_a0h { - rom-addr = /bits/ 8 <0xa0>; - rom-val = /bits/ 8 <0xff>; - }; - rom_a1h { - rom-addr = /bits/ 8 <0xa1>; - rom-val = /bits/ 8 <0x3f>; - }; - rom_a2h { - rom-addr = /bits/ 8 <0xa2>; - rom-val = /bits/ 8 <0x20>; - }; - rom_a3h { - rom-addr = /bits/ 8 <0xa3>; - rom-val = /bits/ 8 <0x5e>; - }; - rom_a4h { - rom-addr = /bits/ 8 <0xa4>; - rom-val = /bits/ 8 <0x02>; - }; - rom_a5h { - rom-addr = /bits/ 8 <0xa5>; - rom-val = /bits/ 8 <0x04>; - }; - rom_a6h { - rom-addr = /bits/ 8 <0xa6>; - rom-val = /bits/ 8 <0x80>; - }; - rom_a7h { - rom-addr = /bits/ 8 <0xa7>; - rom-val = /bits/ 8 <0xf7>; - }; - rom_a9h { - rom-addr = /bits/ 8 <0xa9>; - rom-val = /bits/ 8 <0x80>; - }; - rom_aah { - rom-addr = /bits/ 8 <0xaa>; - rom-val = /bits/ 8 <0x0f>; - }; - rom_aeh { - rom-addr = /bits/ 8 <0xae>; - rom-val = /bits/ 8 <0x0f>; - }; - }; - }; -}; - -&spmi_bus { - pm8941@0 { - charger@1000 { - qcom,fast-charge-safe-current = <1500000>; - qcom,fast-charge-current-limit = <1500000>; - qcom,dc-current-limit = <1800000>; - qcom,fast-charge-safe-voltage = <4400000>; - qcom,fast-charge-high-threshold-voltage = <4350000>; - qcom,fast-charge-low-threshold-voltage = <3400000>; - qcom,auto-recharge-threshold-voltage = <4200000>; - qcom,minimum-input-voltage = <4300000>; - }; - - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; - - bt_reg_on_pin: bt-reg-on { - pins = "gpio16"; - function = "normal"; - - output-low; - power-source = <PM8941_GPIO_S3>; - }; - - wlan_sleep_clk_pin: wl-sleep-clk { - pins = "gpio17"; - function = "func2"; - - output-high; - power-source = <PM8941_GPIO_S3>; - }; - - wlan_regulator_pin: wl-reg-active { - pins = "gpio18"; - function = "normal"; - - bias-disable; - power-source = <PM8941_GPIO_S3>; - }; - - lcd_dcdc_en_pin_a: lcd-dcdc-en-active { - pins = "gpio20"; - function = "normal"; - - bias-disable; - power-source = <PM8941_GPIO_S3>; - input-disable; - output-low; - }; - - }; - - coincell@2800 { - status = "okay"; - qcom,rset-ohms = <2100>; - qcom,vset-millivolts = <3000>; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts deleted file mode 100644 index a62e5c25b23c..000000000000 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ /dev/null @@ -1,484 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-msm8974.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> - -/ { - model = "Sony Xperia Z1"; - compatible = "sony,xperia-honami", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - }; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA>; - }; - - camera-focus { - label = "camera_focus"; - gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA_FOCUS>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - }; - }; - - memory@0 { - reg = <0 0x40000000>, <0x40000000 0x40000000>; - device_type = "memory"; - }; - - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s4 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - s4 { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-boot-on; - regulator-system-load = <200000>; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; -}; - -&soc { - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; - - sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhci@f98a4900 { - status = "okay"; - - bus-width = <4>; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; - }; - - serial@f991e000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart2_pin_a>; - }; - - i2c@f9924000 { - status = "okay"; - - clock-frequency = <355000>; - qcom,src-freq = <50000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - - synaptics@2c { - compatible = "syna,rmi4-i2c"; - reg = <0x2c>; - - interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; - - #address-cells = <1>; - #size-cells = <0>; - - vdd-supply = <&pm8941_l22>; - vio-supply = <&pm8941_lvs3>; - - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_pin>; - - syna,startup-delay-ms = <10>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f11@11 { - reg = <0x11>; - touchscreen-inverted-x; - syna,sensor-type = <1>; - }; - }; - }; - - pinctrl@fd510000 { - blsp1_uart2_pin_a: blsp1-uart2-pin-active { - rx { - pins = "gpio5"; - function = "blsp_uart2"; - - drive-strength = <2>; - bias-pull-up; - }; - - tx { - pins = "gpio4"; - function = "blsp_uart2"; - - drive-strength = <4>; - bias-disable; - }; - }; - - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - - drive-strength = <2>; - bias-disable; - }; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - ts_int_pin: touch-int { - pin { - pins = "gpio61"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - input-enable; - }; - }; - }; - - dma-controller@f9944000 { - qcom,controlled-remotely; - }; -}; - -&spmi_bus { - pm8941@0 { - charger@1000 { - qcom,fast-charge-safe-current = <1500000>; - qcom,fast-charge-current-limit = <1500000>; - qcom,dc-current-limit = <1800000>; - qcom,fast-charge-safe-voltage = <4400000>; - qcom,fast-charge-high-threshold-voltage = <4350000>; - qcom,fast-charge-low-threshold-voltage = <3400000>; - qcom,auto-recharge-threshold-voltage = <4200000>; - qcom,minimum-input-voltage = <4300000>; - }; - - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio3", "gpio4", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; - }; - - coincell@2800 { - status = "okay"; - qcom,rset-ohms = <2100>; - qcom,vset-millivolts = <3000>; - }; - }; - - pm8941@1 { - wled@d800 { - status = "okay"; - - qcom,cs-out; - qcom,current-limit = <20>; - qcom,current-boost-limit = <805>; - qcom,switching-freq = <1600>; - qcom,ovp = <29>; - qcom,num-strings = <2>; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts new file mode 100644 index 000000000000..68d5626bf491 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974-sony-xperia-rhine.dtsi" + +/ { + model = "Sony Xperia Z1 Compact"; + compatible = "sony,xperia-amami", "qcom,msm8974"; +}; + +&smbb { + qcom,fast-charge-safe-current = <1300000>; + qcom,fast-charge-current-limit = <1300000>; + qcom,dc-current-limit = <1300000>; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts new file mode 100644 index 000000000000..ea6a941d8f8c --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974-sony-xperia-rhine.dtsi" + +/ { + model = "Sony Xperia Z1"; + compatible = "sony,xperia-honami", "qcom,msm8974"; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi new file mode 100644 index 000000000000..1d21de46f85c --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi @@ -0,0 +1,457 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA>; + }; + + camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ramoops@3e8e0000 { + compatible = "ramoops"; + reg = <0x3e8e0000 0x200000>; + + console-size = <0x100000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x80000>; + }; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + clock-frequency = <355000>; + + synaptics@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + + interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; + + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_pin>; + + syna,startup-delay-ms = <10>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touchscreen-inverted-x; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + clock-frequency = <355000>; + + nfc@28 { + compatible = "nxp,pn544-i2c"; + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <59 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&pm8941_gpios 23 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_dma { + qcom,controlled-remotely; +}; + +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + /* sii8334 MHL HDMI bridge */ +}; + +&otg { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; +}; + +&pm8941_coincell { + status = "okay"; + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio3", "gpio4", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; +}; + +&pm8941_wled { + status = "okay"; + + qcom,cs-out; + qcom,current-limit = <20>; + qcom,current-boost-limit = <805>; + qcom,switching-freq = <1600>; + qcom,ovp = <29>; + qcom,num-strings = <2>; +}; + +&rpm_requests { + pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s4: s4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + }; + + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s4: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + + pm8941_lvs3: lvs3 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; +}; + +&smbb { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,dc-current-limit = <1800000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,fast-charge-low-threshold-voltage = <3400000>; + qcom,auto-recharge-threshold-voltage = <4200000>; + qcom,minimum-input-voltage = <4300000>; +}; + +&tlmm { + ts_int_pin: touch-int { + pins = "gpio61"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc-on { + clk { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + + cd { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 412d94736c35..814ad0b46232 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -12,61 +12,19 @@ / { #address-cells = <1>; #size-cells = <1>; - model = "Qualcomm MSM8974"; - compatible = "qcom,msm8974"; interrupt-parent = <&intc>; - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mpss_region: mpss@8000000 { - reg = <0x08000000 0x5100000>; - no-map; - }; - - mba_region: mba@d100000 { - reg = <0x0d100000 0x100000>; - no-map; - }; - - wcnss_region: wcnss@d200000 { - reg = <0x0d200000 0xa00000>; - no-map; - }; - - adsp_region: adsp@dc00000 { - reg = <0x0dc00000 0x1900000>; - no-map; - }; - - venus@f500000 { - reg = <0x0f500000 0x500000>; - no-map; - }; - - smem_region: smem@fa00000 { - reg = <0xfa00000 0x200000>; - no-map; - }; - - tz@fc00000 { - reg = <0x0fc00000 0x160000>; - no-map; - }; - - rfsa@fd60000 { - reg = <0x0fd60000 0x20000>; - no-map; + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; }; - rmtfs@fd80000 { - compatible = "qcom,rmtfs-mem"; - reg = <0x0fd80000 0x180000>; - no-map; - - qcom,client-id = <1>; + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; }; }; @@ -136,238 +94,75 @@ }; }; + firmware { + scm { + compatible = "qcom,scm"; + clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; + clock-names = "core", "bus", "iface"; + }; + }; + memory { device_type = "memory"; reg = <0x0 0x0>; }; - thermal-zones { - cpu0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 5>; - - trips { - cpu_alert0: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit0: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 6>; - - trips { - cpu_alert1: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit1: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 7>; - - trips { - cpu_alert2: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit2: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu3-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 8>; - - trips { - cpu_alert3: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit3: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - q6-dsp-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + pmu { + compatible = "qcom,krait-pmu"; + interrupts = <GIC_PPI 7 0xf04>; + }; - thermal-sensors = <&tsens 1>; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; - trips { - q6_dsp_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + mpss_region: mpss@8000000 { + reg = <0x08000000 0x5100000>; + no-map; }; - modemtx-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 2>; - - trips { - modemtx_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + mba_region: mba@d100000 { + reg = <0x0d100000 0x100000>; + no-map; }; - video-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 3>; - - trips { - video_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + wcnss_region: wcnss@d200000 { + reg = <0x0d200000 0xa00000>; + no-map; }; - wlan-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 4>; - - trips { - wlan_alert0: trip-point0 { - temperature = <105000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + adsp_region: adsp@dc00000 { + reg = <0x0dc00000 0x1900000>; + no-map; }; - gpu-top-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 9>; - - trips { - gpu1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + venus_region: memory@f500000 { + reg = <0x0f500000 0x500000>; + no-map; }; - gpu-bottom-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 10>; - - trips { - gpu2_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + smem_region: smem@fa00000 { + reg = <0xfa00000 0x200000>; + no-map; }; - }; - cpu-pmu { - compatible = "qcom,krait-pmu"; - interrupts = <GIC_PPI 7 0xf04>; - }; - - clocks { - xo_board: xo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; + tz_region: memory@fc00000 { + reg = <0x0fc00000 0x160000>; + no-map; }; - sleep_clk: sleep_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; + rfsa_mem: memory@fd60000 { + reg = <0x0fd60000 0x20000>; + no-map; }; - }; - - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 2 0xf08>, - <GIC_PPI 3 0xf08>, - <GIC_PPI 4 0xf08>, - <GIC_PPI 1 0xf08>; - clock-frequency = <19200000>; - }; - - adsp-pil { - compatible = "qcom,msm8974-adsp-pil"; - - interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - - cx-supply = <&pm8841_s2>; - - clocks = <&xo_board>; - clock-names = "xo"; - - memory-region = <&adsp_region>; - qcom,smem-states = <&adsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - smd-edge { - interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; - - qcom,ipc = <&apcs 8 8>; - qcom,smd-edge = <1>; + rmtfs@fd80000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0fd80000 0x180000>; + no-map; - label = "lpass"; + qcom,client-id = <1>; }; }; @@ -497,11 +292,23 @@ }; }; - firmware { - scm { - compatible = "qcom,scm"; - clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; - clock-names = "core", "bus", "iface"; + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm_requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; + #clock-cells = <1>; + }; + }; }; }; @@ -524,31 +331,6 @@ reg = <0xf9011000 0x1000>; }; - qfprom: qfprom@fc4bc000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "qcom,qfprom"; - reg = <0xfc4bc000 0x1000>; - tsens_calib: calib@d0 { - reg = <0xd0 0x18>; - }; - tsens_backup: backup@440 { - reg = <0x440 0x10>; - }; - }; - - tsens: thermal-sensor@fc4a9000 { - compatible = "qcom,msm8974-tsens"; - reg = <0xfc4a9000 0x1000>, /* TM */ - <0xfc4a8000 0x1000>; /* SROT */ - nvmem-cells = <&tsens_calib>, <&tsens_backup>; - nvmem-cell-names = "calib", "calib_backup"; - #qcom,sensors = <11>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; - #thermal-sensor-cells = <1>; - }; - timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -654,47 +436,59 @@ reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; }; - restart@fc4ab000 { - compatible = "qcom,pshold"; - reg = <0xfc4ab000 0x4>; - }; + sdhc_1: sdhci@f9824900 { + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + bus-width = <8>; + non-removable; - gcc: clock-controller@fc400000 { - compatible = "qcom,gcc-msm8974"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0xfc400000 0x4000>; + status = "disabled"; }; - tcsr: syscon@fd4a0000 { - compatible = "syscon"; - reg = <0xfd4a0000 0x10000>; - }; + sdhc_3: sdhci@f9864900 { + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC3_APPS_CLK>, + <&gcc GCC_SDCC3_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + bus-width = <4>; - tcsr_mutex_block: syscon@fd484000 { - compatible = "syscon"; - reg = <0xfd484000 0x2000>; - }; + #address-cells = <1>; + #size-cells = <0>; - mmcc: clock-controller@fd8c0000 { - compatible = "qcom,mmcc-msm8974"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0xfd8c0000 0x6000>; + status = "disabled"; }; - tcsr_mutex: tcsr-mutex { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_block 0 0x80>; + sdhc_2: sdhci@f98a4900 { + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + bus-width = <4>; - #hwlock-cells = <1>; - }; + #address-cells = <1>; + #size-cells = <0>; - rpm_msg_ram: memory@fc428000 { - compatible = "qcom,rpm-msg-ram"; - reg = <0xfc428000 0x4000>; + status = "disabled"; }; blsp1_uart1: serial@f991d000 { @@ -715,7 +509,73 @@ status = "disabled"; }; - blsp2_uart7: serial@f995d000 { + blsp1_i2c1: i2c@f9923000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9923000 0x1000>; + interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c1_default>; + pinctrl-1 = <&blsp1_i2c1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c2: i2c@f9924000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9924000 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c2_default>; + pinctrl-1 = <&blsp1_i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c3: i2c@f9925000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9925000 0x1000>; + interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c3_default>; + pinctrl-1 = <&blsp1_i2c3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c6: i2c@f9928000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9928000 0x1000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c6_default>; + pinctrl-1 = <&blsp1_i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_dma: dma-controller@f9944000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xf9944000 0x19000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp2_uart1: serial@f995d000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995d000 0x1000>; interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>; @@ -724,7 +584,7 @@ status = "disabled"; }; - blsp2_uart8: serial@f995e000 { + blsp2_uart2: serial@f995e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995e000 0x1000>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; @@ -733,7 +593,7 @@ status = "disabled"; }; - blsp2_uart10: serial@f9960000 { + blsp2_uart4: serial@f9960000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf9960000 0x1000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; @@ -742,46 +602,45 @@ status = "disabled"; }; - sdhci@f9824900 { - compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; - reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; - reg-names = "hc_mem", "core_mem"; - interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; + blsp2_i2c2: i2c@f9964000 { status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9964000 0x1000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c2_default>; + pinctrl-1 = <&blsp2_i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; }; - sdhci@f9864900 { - compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; - reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; - reg-names = "hc_mem", "core_mem"; - interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC3_APPS_CLK>, - <&gcc GCC_SDCC3_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; + blsp2_i2c5: i2c@f9967000 { status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9967000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c5_default>; + pinctrl-1 = <&blsp2_i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; }; - sdhci@f98a4900 { - compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; - reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; - reg-names = "hc_mem", "core_mem"; - interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; + blsp2_i2c6: i2c@f9968000 { status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9968000 0x1000>; + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; }; otg: usb@f9a55000 { @@ -835,55 +694,6 @@ clock-names = "core"; }; - remoteproc@fc880000 { - compatible = "qcom,msm8974-mss-pil"; - reg = <0xfc880000 0x100>, <0xfc820000 0x020>; - reg-names = "qdsp6", "rmb"; - - interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - - clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, - <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_BOOT_ROM_AHB_CLK>, - <&xo_board>; - clock-names = "iface", "bus", "mem", "xo"; - - resets = <&gcc GCC_MSS_RESTART>; - reset-names = "mss_restart"; - - cx-supply = <&pm8841_s2>; - mss-supply = <&pm8841_s3>; - mx-supply = <&pm8841_s1>; - pll-supply = <&pm8941_l12>; - - qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; - - qcom,smem-states = <&modem_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - mba { - memory-region = <&mba_region>; - }; - - mpss { - memory-region = <&mpss_region>; - }; - - smd-edge { - interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; - - qcom,ipc = <&apcs 8 12>; - qcom,smd-edge = <0>; - - label = "modem"; - }; - }; - pronto: remoteproc@fb21b000 { compatible = "qcom,pronto-v2-pil", "qcom,pronto"; reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>; @@ -898,8 +708,6 @@ <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - vddpx-supply = <&pm8941_s3>; - qcom,smem-states = <&wcnss_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -910,11 +718,6 @@ clocks = <&rpmcc RPM_SMD_CXO_A2>; clock-names = "xo"; - - vddxo-supply = <&pm8941_l6>; - vddrfa-supply = <&pm8941_l11>; - vddpa-supply = <&pm8941_l19>; - vdddig-supply = <&pm8941_s3>; }; smd-edge { @@ -942,139 +745,32 @@ interrupt-names = "tx", "rx"; qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; - qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; }; }; }; }; - msmgpio: pinctrl@fd510000 { - compatible = "qcom,msm8974-pinctrl"; - reg = <0xfd510000 0x4000>; - gpio-controller; - gpio-ranges = <&msmgpio 0 0 146>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - }; - - i2c@f9923000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9923000 0x1000>; - interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c@f9924000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9924000 0x1000>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - blsp_i2c3: i2c@f9925000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9925000 0x1000>; - interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - blsp_i2c6: i2c@f9928000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9928000 0x1000>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - blsp_i2c8: i2c@f9964000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9964000 0x1000>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - blsp_i2c11: i2c@f9967000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9967000 0x1000>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; - dma-names = "tx", "rx"; - }; - - blsp_i2c12: i2c@f9968000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9968000 0x1000>; - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spmi_bus: spmi@fc4cf000 { - compatible = "qcom,spmi-pmic-arb"; - reg-names = "core", "intr", "cnfg"; - reg = <0xfc4cf000 0x1000>, - <0xfc4cb000 0x1000>, - <0xfc4ca000 0x1000>; - interrupt-names = "periph_irq"; - interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; - }; - - blsp2_dma: dma-controller@f9944000 { - compatible = "qcom,bam-v1.4.0"; - reg = <0xf9944000 0x19000>; - interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - }; - - etr@fc322000 { + etf@fc307000 { compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0xfc322000 0x1000>; + reg = <0xfc307000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + in-ports { port { - etr_in: endpoint { - remote-endpoint = <&replicator_out0>; + etf_in: endpoint { + remote-endpoint = <&merger_out>; }; }; }; @@ -1096,59 +792,39 @@ }; }; - replicator@fc31c000 { - compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0xfc31c000 0x1000>; + funnel@fc31a000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0xfc31a000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - out-ports { + in-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { - reg = <0>; - replicator_out0: endpoint { - remote-endpoint = <&etr_in>; - }; - }; - port@1 { - reg = <1>; - replicator_out1: endpoint { - remote-endpoint = <&tpiu_in>; - }; - }; - }; - - in-ports { - port { - replicator_in: endpoint { - remote-endpoint = <&etf_out>; + /* + * Not described input ports: + * 0 - not-connected + * 1 - connected trought funnel to Multimedia CPU + * 2 - connected to Wireless CPU + * 3 - not-connected + * 4 - not-connected + * 6 - not-connected + * 7 - connected to STM + */ + port@5 { + reg = <5>; + funnel1_in5: endpoint { + remote-endpoint = <&kpss_out>; }; }; }; - }; - - etf@fc307000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0xfc307000 0x1000>; - - clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; out-ports { port { - etf_out: endpoint { - remote-endpoint = <&replicator_in>; - }; - }; - }; - - in-ports { - port { - etf_in: endpoint { - remote-endpoint = <&merger_out>; + funnel1_out: endpoint { + remote-endpoint = <&merger_in1>; }; }; }; @@ -1188,85 +864,51 @@ }; }; - funnel@fc31a000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0xfc31a000 0x1000>; + replicator@fc31c000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0xfc31c000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - in-ports { + out-ports { #address-cells = <1>; #size-cells = <0>; - /* - * Not described input ports: - * 0 - not-connected - * 1 - connected trought funnel to Multimedia CPU - * 2 - connected to Wireless CPU - * 3 - not-connected - * 4 - not-connected - * 6 - not-connected - * 7 - connected to STM - */ - port@5 { - reg = <5>; - funnel1_in5: endpoint { - remote-endpoint = <&kpss_out>; + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&tpiu_in>; }; }; }; - out-ports { + in-ports { port { - funnel1_out: endpoint { - remote-endpoint = <&merger_in1>; + replicator_in: endpoint { + remote-endpoint = <&etf_out>; }; }; }; }; - funnel@fc345000 { /* KPSS funnel only 4 inputs are used */ - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0xfc345000 0x1000>; + etr@fc322000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0xfc322000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - kpss_in0: endpoint { - remote-endpoint = <&etm0_out>; - }; - }; - port@1 { - reg = <1>; - kpss_in1: endpoint { - remote-endpoint = <&etm1_out>; - }; - }; - port@2 { - reg = <2>; - kpss_in2: endpoint { - remote-endpoint = <&etm2_out>; - }; - }; - port@3 { - reg = <3>; - kpss_in3: endpoint { - remote-endpoint = <&etm3_out>; - }; - }; - }; - - out-ports { port { - kpss_out: endpoint { - remote-endpoint = <&funnel1_in5>; + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; }; }; }; @@ -1344,25 +986,66 @@ }; }; - ocmem@fdd00000 { - compatible = "qcom,msm8974-ocmem"; - reg = <0xfdd00000 0x2000>, - <0xfec00000 0x180000>; - reg-names = "ctrl", - "mem"; - clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, - <&mmcc OCMEMCX_OCMEMNOC_CLK>; - clock-names = "core", - "iface"; + /* KPSS funnel, only 4 inputs are used */ + funnel@fc345000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0xfc345000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; - gmu_sram: gmu-sram@0 { - reg = <0x0 0x100000>; + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + kpss_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + port@1 { + reg = <1>; + kpss_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + port@2 { + reg = <2>; + kpss_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + port@3 { + reg = <3>; + kpss_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + }; + + out-ports { + port { + kpss_out: endpoint { + remote-endpoint = <&funnel1_in5>; + }; + }; }; }; + gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-msm8974"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfc400000 0x4000>; + }; + + rpm_msg_ram: memory@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + }; + bimc: interconnect@fc380000 { reg = <0xfc380000 0x6a000>; compatible = "qcom,msm8974-bimc"; @@ -1417,94 +1100,378 @@ <&rpmcc RPM_SMD_CNOC_A_CLK>; }; - gpu: adreno@fdb00000 { - status = "disabled"; + tsens: thermal-sensor@fc4a9000 { + compatible = "qcom,msm8974-tsens"; + reg = <0xfc4a9000 0x1000>, /* TM */ + <0xfc4a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + #qcom,sensors = <11>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + #thermal-sensor-cells = <1>; + }; - compatible = "qcom,adreno-330.1", - "qcom,adreno"; - reg = <0xfdb00000 0x10000>; - reg-names = "kgsl_3d0_reg_memory"; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "kgsl_3d0_irq"; - clock-names = "core", - "iface", - "mem_iface"; - clocks = <&mmcc OXILI_GFX3D_CLK>, - <&mmcc OXILICX_AHB_CLK>, - <&mmcc OXILICX_AXI_CLK>; - sram = <&gmu_sram>; - power-domains = <&mmcc OXILICX_GDSC>; - operating-points-v2 = <&gpu_opp_table>; + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; - interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>, - <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>; - interconnect-names = "gfx-mem", - "ocmem"; + qfprom: qfprom@fc4bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; + tsens_calib: calib@d0 { + reg = <0xd0 0x18>; + }; + tsens_backup: backup@440 { + reg = <0x440 0x10>; + }; + }; - // iommus = <&gpu_iommu 0>; + spmi_bus: spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; - gpu_opp_table: opp_table { - compatible = "operating-points-v2"; + remoteproc_mss: remoteproc@fc880000 { + compatible = "qcom,msm8974-mss-pil"; + reg = <0xfc880000 0x100>, <0xfc820000 0x020>; + reg-names = "qdsp6", "rmb"; - opp-320000000 { - opp-hz = /bits/ 64 <320000000>; + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "bus", "mem", "xo"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + mba { + memory-region = <&mba_region>; + }; + + mpss { + memory-region = <&mpss_region>; + }; + + smd-edge { + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 12>; + qcom,smd-edge = <0>; + + label = "modem"; + }; + }; + + tcsr_mutex_block: syscon@fd484000 { + compatible = "syscon"; + reg = <0xfd484000 0x2000>; + }; + + tcsr: syscon@fd4a0000 { + compatible = "syscon"; + reg = <0xfd4a0000 0x10000>; + }; + + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8974-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + sdc1_off: sdc1-off { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; }; - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; }; - opp-27000000 { - opp-hz = /bits/ 64 <27000000>; + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_off: sdc2-off { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + cd { + pins = "gpio54"; + bias-disable; + drive-strength = <2>; + }; + }; + + blsp1_uart2_active: blsp1-uart2-active { + rx { + pins = "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-pull-up; + }; + + tx { + pins = "gpio4"; + function = "blsp_uart2"; + drive-strength = <4>; + bias-disable; + }; + }; + + blsp2_uart1_active: blsp2-uart1-active { + tx-rts { + pins = "gpio41", "gpio44"; + function = "blsp_uart7"; + drive-strength = <2>; + bias-disable; + }; + + rx-cts { + pins = "gpio42", "gpio43"; + function = "blsp_uart7"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + blsp2_uart1_sleep: blsp2-uart1-sleep { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp2_uart4_active: blsp2-uart4-active { + tx-rts { + pins = "gpio53", "gpio56"; + function = "blsp_uart10"; + drive-strength = <2>; + bias-disable; + }; + + rx-cts { + pins = "gpio54", "gpio55"; + function = "blsp_uart10"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + blsp1_i2c1_default: blsp1-i2c1-default { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c1_sleep: blsp1-i2c1-sleep { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c2_default: blsp1-i2c2-default { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c2_sleep: blsp1-i2c2-sleep { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c3_default: blsp1-i2c3-default { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_sleep: blsp1-i2c3-sleep { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-pull-up; + }; + + /* BLSP1_I2C4 info is missing */ + + /* BLSP1_I2C5 info is missing */ + + blsp1_i2c6_default: blsp1-i2c6-default { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c6_sleep: blsp1-i2c6-sleep { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-pull-up; + }; + /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */ + + /* BLSP2_I2C1 info is missing */ + + blsp2_i2c2_default: blsp2-i2c2-default { + pins = "gpio47", "gpio48"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c2_sleep: blsp2-i2c2-sleep { + pins = "gpio47", "gpio48"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-pull-up; + }; + + /* BLSP2_I2C3 info is missing */ + + /* BLSP2_I2C4 info is missing */ + + blsp2_i2c5_default: blsp2-i2c5-default { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c5_sleep: blsp2-i2c5-sleep { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-pull-up; + }; + + /* BLSP2_I2C6 info is missing - nobody uses it though? */ + + spi8_default: spi8_default { + mosi { + pins = "gpio45"; + function = "blsp_spi8"; + }; + miso { + pins = "gpio46"; + function = "blsp_spi8"; + }; + cs { + pins = "gpio47"; + function = "blsp_spi8"; + }; + clk { + pins = "gpio48"; + function = "blsp_spi8"; }; }; }; - mdss: mdss@fd900000 { - status = "disabled"; + mmcc: clock-controller@fd8c0000 { + compatible = "qcom,mmcc-msm8974"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfd8c0000 0x6000>; + }; + mdss: mdss@fd900000 { compatible = "qcom,mdss"; - reg = <0xfd900000 0x100>, - <0xfd924000 0x1000>; - reg-names = "mdss_phys", - "vbif_phys"; + reg = <0xfd900000 0x100>, <0xfd924000 0x1000>; + reg-names = "mdss_phys", "vbif_phys"; power-domains = <&mmcc MDSS_GDSC>; clocks = <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_AXI_CLK>, - <&mmcc MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "vsync"; + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "vsync"; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; + status = "disabled"; + #address-cells = <1>; #size-cells = <1>; ranges; mdp: mdp@fd900000 { - status = "disabled"; - compatible = "qcom,mdp5"; reg = <0xfd900100 0x22000>; reg-names = "mdp_phys"; interrupt-parent = <&mdss>; - interrupts = <0 0>; + interrupts = <0>; clocks = <&mmcc MDSS_AHB_CLK>, <&mmcc MDSS_AXI_CLK>, <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "core", - "vsync"; + clock-names = "iface", "bus", "core", "vsync"; interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>; interconnect-names = "mdp0-mem"; @@ -1523,38 +1490,39 @@ }; dsi0: dsi@fd922800 { - status = "disabled"; - compatible = "qcom,mdss-dsi-ctrl"; reg = <0xfd922800 0x1f8>; reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>; - assigned-clocks = <&mmcc BYTE0_CLK_SRC>, - <&mmcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi_phy0 0>, - <&dsi_phy0 1>; + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; clocks = <&mmcc MDSS_MDP_CLK>, - <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_AXI_CLK>, - <&mmcc MDSS_BYTE0_CLK>, - <&mmcc MDSS_PCLK0_CLK>, - <&mmcc MDSS_ESC0_CLK>, - <&mmcc MMSS_MISC_AHB_CLK>; + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>; clock-names = "mdp_core", - "iface", - "bus", - "byte", - "pixel", - "core", - "core_mmss"; - - phys = <&dsi_phy0>; + "iface", + "bus", + "byte", + "pixel", + "core", + "core_mmss"; + + phys = <&dsi0_phy>; phy-names = "dsi-phy"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1574,28 +1542,115 @@ }; }; - dsi_phy0: dsi-phy@fd922a00 { - status = "disabled"; - + dsi0_phy: dsi-phy@fd922a00 { compatible = "qcom,dsi-phy-28nm-hpm"; reg = <0xfd922a00 0xd4>, <0xfd922b00 0x280>, <0xfd922d80 0x30>; reg-names = "dsi_pll", - "dsi_phy", - "dsi_phy_regulator"; + "dsi_phy", + "dsi_phy_regulator"; #clock-cells = <1>; #phy-cells = <0>; - qcom,dsi-phy-index = <0>; clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; clock-names = "iface", "ref"; + + status = "disabled"; }; }; - imem@fe805000 { + gpu: adreno@fdb00000 { + compatible = "qcom,adreno-330.1", "qcom,adreno"; + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + clock-names = "core", "iface", "mem_iface"; + + sram = <&gmu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>, + <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>; + interconnect-names = "gfx-mem", "ocmem"; + + // iommus = <&gpu_iommu 0>; + status = "disabled"; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + + opp-27000000 { + opp-hz = /bits/ 64 <27000000>; + }; + }; + }; + + ocmem@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x180000>; + reg-names = "ctrl", "mem"; + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <1>; + + gmu_sram: gmu-sram@0 { + reg = <0x0 0x100000>; + }; + }; + + remoteproc_adsp: remoteproc@fe200000 { + compatible = "qcom,msm8974-adsp-pil"; + reg = <0xfe200000 0x100>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&adsp_region>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + smd-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 8>; + qcom,smd-edge = <1>; + label = "lpass"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + imem: imem@fe805000 { compatible = "syscon", "simple-mfd"; reg = <0xfe805000 0x1000>; @@ -1606,76 +1661,194 @@ }; }; - smd { - compatible = "qcom,smd"; + tcsr_mutex: tcsr-mutex { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_block 0 0x80>; - rpm { - interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; + #hwlock-cells = <1>; + }; - rpm_requests { - compatible = "qcom,rpm-msm8974"; - qcom,smd-channels = "rpm_requests"; + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - rpmcc: clock-controller { - compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; - #clock-cells = <1>; + thermal-sensors = <&tsens 5>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + q6_dsp_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; }; + }; + }; - pm8841-regulators { - compatible = "qcom,rpm-pm8841-regulators"; - - pm8841_s1: s1 {}; - pm8841_s2: s2 {}; - pm8841_s3: s3 {}; - pm8841_s4: s4 {}; - pm8841_s5: s5 {}; - pm8841_s6: s6 {}; - pm8841_s7: s7 {}; - pm8841_s8: s8 {}; + modemtx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + modemtx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - pm8941-regulators { - compatible = "qcom,rpm-pm8941-regulators"; - - pm8941_s1: s1 {}; - pm8941_s2: s2 {}; - pm8941_s3: s3 {}; - - pm8941_l1: l1 {}; - pm8941_l2: l2 {}; - pm8941_l3: l3 {}; - pm8941_l4: l4 {}; - pm8941_l5: l5 {}; - pm8941_l6: l6 {}; - pm8941_l7: l7 {}; - pm8941_l8: l8 {}; - pm8941_l9: l9 {}; - pm8941_l10: l10 {}; - pm8941_l11: l11 {}; - pm8941_l12: l12 {}; - pm8941_l13: l13 {}; - pm8941_l14: l14 {}; - pm8941_l15: l15 {}; - pm8941_l16: l16 {}; - pm8941_l17: l17 {}; - pm8941_l18: l18 {}; - pm8941_l19: l19 {}; - pm8941_l20: l20 {}; - pm8941_l21: l21 {}; - pm8941_l22: l22 {}; - pm8941_l23: l23 {}; - pm8941_l24: l24 {}; - - pm8941_lvs1: lvs1 {}; - pm8941_lvs2: lvs2 {}; - pm8941_lvs3: lvs3 {}; + thermal-sensors = <&tsens 3>; + + trips { + video_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + wlan_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 10>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; }; }; }; }; + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 2 0xf08>, + <GIC_PPI 3 0xf08>, + <GIC_PPI 4 0xf08>, + <GIC_PPI 1 0xf08>; + clock-frequency = <19200000>; + }; + vreg_boost: vreg-boost { compatible = "regulator-fixed"; @@ -1692,6 +1865,7 @@ pinctrl-names = "default"; pinctrl-0 = <&boost_bypass_n_pin>; }; + vreg_vph_pwr: vreg-vph-pwr { compatible = "regulator-fixed"; regulator-name = "vph-pwr"; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts new file mode 100644 index 000000000000..58cb2ce1e4df --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts @@ -0,0 +1,432 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Fairphone 2"; + compatible = "fairphone,fp2", "qcom,msm8974"; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA>; + wakeup-source; + debounce-interval = <15>; + }; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; + debounce-interval = <15>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; + vcc-supply = <&pm8941_l18>; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + touchscreen@41 { + compatible = "ilitek,ili2120"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&imem { + reboot-mode { + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; + }; +}; + +&otg { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio1", "gpio2", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; +}; + +&pronto { + status = "okay"; + + vddmx-supply = <&pm8841_s1>; + vddcx-supply = <&pm8841_s2>; + vddpx-supply = <&pm8941_s3>; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + iris { + vddxo-supply = <&pm8941_l6>; + vddrfa-supply = <&pm8941_l11>; + vddpa-supply = <&pm8941_l19>; + vdddig-supply = <&pm8941_s3>; + }; + + smd-edge { + qcom,remote-pid = <4>; + label = "pronto"; + + wcnss { + status = "okay"; + }; + }; +}; + +&remoteproc_adsp { + cx-supply = <&pm8841_s2>; +}; + +&remoteproc_mss { + cx-supply = <&pm8841_s2>; + mss-supply = <&pm8841_s3>; + mx-supply = <&pm8841_s1>; + pll-supply = <&pm8941_l12>; +}; + +&rpm_requests { + pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + }; + + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3350000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; +}; + +&smbb { + usb-charge-current-limit = <1500000>; + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,fast-charge-safe-voltage = <4380000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,auto-recharge-threshold-voltage = <4240000>; + qcom,minimum-input-voltage = <4450000>; +}; + +&tlmm { + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + wcnss_pin_a: wcnss-pin-active { + wlan { + pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "wlan"; + + drive-strength = <6>; + bias-pull-down; + }; + + bt { + pins = "gpio35", "gpio43", "gpio44"; + function = "bt"; + + drive-strength = <2>; + bias-pull-down; + }; + + fm { + pins = "gpio41", "gpio42"; + function = "fm"; + + drive-strength = <2>; + bias-pull-down; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts new file mode 100644 index 000000000000..d6b2300a8223 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts @@ -0,0 +1,813 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "qcom-pma8084.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Samsung Galaxy S5"; + compatible = "samsung,klte", "qcom,msm8974"; + + aliases { + serial0 = &blsp1_uart1; + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_3; /* SDC2 SD card slot */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + home-key { + label = "home_key"; + gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_HOMEPAGE>; + wakeup-source; + debounce-interval = <15>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + i2c-gpio-touchkey { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_touchkey_pins>; + + touchkey@20 { + compatible = "cypress,tm2-touchkey"; + reg = <0x20>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_pin>; + + vcc-supply = <&max77826_ldo15>; + vdd-supply = <&pma8084_l19>; + + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + }; + }; + + i2c-gpio-led { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_led_gpioex_pins>; + + i2c-gpio,delay-us = <2>; + + gpio_expander: gpio@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + + gpio-controller; + #gpio-cells = <2>; + + vcc-supply = <&pma8084_s4>; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioex_pin>; + + reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; + }; + + led-controller@30 { + compatible = "panasonic,an30259a"; + reg = <0x30>; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vreg_panel: panel-regulator { + compatible = "regulator-fixed"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_en_pin>; + + regulator-name = "panel-vddr-reg"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + /delete-node/ vreg-boost; +}; + +&blsp1_i2c2 { + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&max77826_ldo13>; + vio-supply = <&pma8084_lvs2>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pin>; + + syna,startup-delay-ms = <100>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + pmic@60 { + reg = <0x60>; + compatible = "maxim,max77826"; + + regulators { + max77826_ldo1: LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo2: LDO2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + max77826_ldo3: LDO3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo4: LDO4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo5: LDO5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo6: LDO6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo7: LDO7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo8: LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo9: LDO9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo10: LDO10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo11: LDO11 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo12: LDO12 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo13: LDO13 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo14: LDO14 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo15: LDO15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_buck: BUCK { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + max77826_buckboost: BUCKBOOST { + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3400000>; + }; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c6 { + status = "okay"; + + fuelgauge@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x56>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&fuelgauge_pin>; + }; +}; + +&blsp2_uart2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_pins_active>; + pinctrl-1 = <&blsp2_uart2_pins_sleep>; + + bluetooth { + compatible = "brcm,bcm43540-bt"; + max-speed = <3000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins>; + device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&tlmm>; + interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wakeup"; + }; +}; + +&dsi0 { + status = "okay"; + + vdda-supply = <&pma8084_l2>; + vdd-supply = <&pma8084_l22>; + vddio-supply = <&pma8084_l12>; + + panel: panel@0 { + reg = <0>; + compatible = "samsung,s6e3fa2"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_te_pin &panel_rst_pin>; + + iovdd-supply = <&pma8084_lvs4>; + vddr-supply = <&vreg_panel>; + + reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; + te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + + vddio-supply = <&pma8084_l12>; +}; + +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&otg { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "okay"; + + v1p8-supply = <&pma8084_l6>; + v3p3-supply = <&pma8084_l24>; + + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; +}; + +&pma8084_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio3", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PMA8084_GPIO_S4>; + }; + + touchkey_pin: touchkey-int-pin { + pins = "gpio6"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; + + touch_pin: touchscreen-int-pin { + pins = "gpio8"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; + + panel_en_pin: panel-en-pin { + pins = "gpio14"; + function = "normal"; + bias-pull-up; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + + wlan_sleep_clk_pin: wlan-sleep-clk-pin { + pins = "gpio16"; + function = "func2"; + + output-high; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + }; + + panel_rst_pin: panel-rst-pin { + pins = "gpio17"; + function = "normal"; + bias-disable; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + + fuelgauge_pin: fuelgauge-int-pin { + pins = "gpio21"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; +}; + +&remoteproc_adsp { + cx-supply = <&pma8084_s2>; +}; + +&remoteproc_mss { + cx-supply = <&pma8084_s2>; + mss-supply = <&pma8084_s6>; + mx-supply = <&pma8084_s1>; + pll-supply = <&pma8084_l12>; +}; + +&rpm_requests { + pma8084-regulators { + compatible = "qcom,rpm-pma8084-regulators"; + + pma8084_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; + + pma8084_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pma8084_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pma8084_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pma8084_s6: s6 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pma8084_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pma8084_l3: l3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1200000>; + }; + + pma8084_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pma8084_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pma8084_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pma8084_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pma8084_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pma8084_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pma8084_l19: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pma8084_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pma8084_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pma8084_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pma8084_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pma8084_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pma8084_l25: l25 { + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + }; + + pma8084_l26: l26 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2050000>; + }; + + pma8084_l27: l27 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_lvs1: lvs1 {}; + pma8084_lvs2: lvs2 {}; + pma8084_lvs3: lvs3 {}; + pma8084_lvs4: lvs4 {}; + + pma8084_5vs1: 5vs1 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pma8084_l20>; + vqmmc-supply = <&pma8084_s4>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + max-frequency = <100000000>; + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pma8084_s4>; + non-removable; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + + wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + + interrupt-parent = <&tlmm>; + interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>; + }; +}; + +&sdhc_3 { + status = "okay"; + max-frequency = <100000000>; + vmmc-supply = <&pma8084_l21>; + vqmmc-supply = <&pma8084_l13>; + + /* + * cd-gpio is intentionally disabled. If enabled, an SD card + * present during boot is not initialized correctly. Without + * cd-gpios the driver resorts to polling, so hotplug works. + */ + pinctrl-names = "default"; + pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>; + /* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */ +}; + +&tlmm { + /* This seems suspicious, but somebody with this device should look into it. */ + blsp2_uart2_pins_active: blsp2-uart2-pins-active { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "blsp_uart8"; + drive-strength = <8>; + bias-disable; + }; + + blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + bt_pins: bt-pins { + hostwake { + pins = "gpio75"; + function = "gpio"; + drive-strength = <16>; + input-enable; + }; + + devwake { + pins = "gpio91"; + function = "gpio"; + drive-strength = <2>; + }; + }; + + sdc1_on: sdhc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <4>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <4>; + bias-pull-up; + }; + }; + + sdc3_on: sdc3-on { + pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "sdc3"; + drive-strength = <8>; + bias-disable; + }; + + sdhc3_cd_pin: sdc3-cd-on { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdc2_on: sdhc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + i2c_touchkey_pins: i2c-touchkey { + pins = "gpio95", "gpio96"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + + i2c_led_gpioex_pins: i2c-led-gpioex { + pins = "gpio120", "gpio121"; + function = "gpio"; + input-enable; + bias-pull-down; + }; + + gpioex_pin: gpioex { + pins = "gpio145"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + + wifi_pin: wifi { + pins = "gpio92"; + function = "gpio"; + input-enable; + bias-pull-down; + }; + + panel_te_pin: panel { + pins = "gpio12"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts new file mode 100644 index 000000000000..9bd8faea61a5 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts @@ -0,0 +1,608 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Sony Xperia Z2 Tablet"; + compatible = "sony,xperia-castor", "qcom,msm8974"; + + aliases { + serial0 = &blsp1_uart2; + serial1 = &blsp2_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA>; + }; + + camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + vreg_bl_vddio: lcd-backlight-vddio { + compatible = "regulator-fixed"; + regulator-name = "vreg_bl_vddio"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + gpio = <&tlmm 69 0>; + enable-active-high; + + vin-supply = <&pm8941_s3>; + startup-delay-us = <70000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_backlight_en_pin_a>; + }; + + vreg_vsp: lcd-dcdc-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_vsp"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + + gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_dcdc_en_pin_a>; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_pin>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c2 { + status = "okay"; + clock-frequency = <355000>; + + synaptics@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + + interrupt-parent = <&tlmm>; + interrupts = <86 IRQ_TYPE_EDGE_FALLING>; + + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_pin>; + + syna,startup-delay-ms = <10>; + + rmi-f01@1 { + reg = <0x1>; + syna,nosleep = <1>; + }; + + rmi-f11@11 { + reg = <0x11>; + syna,f11-flip-x = <1>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + lp8566_wled: backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + power-supply = <&vreg_bl_vddio>; + + bl-name = "backlight"; + dev-ctrl = /bits/ 8 <0x05>; + init-brt = /bits/ 8 <0x3f>; + rom_a0h { + rom-addr = /bits/ 8 <0xa0>; + rom-val = /bits/ 8 <0xff>; + }; + rom_a1h { + rom-addr = /bits/ 8 <0xa1>; + rom-val = /bits/ 8 <0x3f>; + }; + rom_a2h { + rom-addr = /bits/ 8 <0xa2>; + rom-val = /bits/ 8 <0x20>; + }; + rom_a3h { + rom-addr = /bits/ 8 <0xa3>; + rom-val = /bits/ 8 <0x5e>; + }; + rom_a4h { + rom-addr = /bits/ 8 <0xa4>; + rom-val = /bits/ 8 <0x02>; + }; + rom_a5h { + rom-addr = /bits/ 8 <0xa5>; + rom-val = /bits/ 8 <0x04>; + }; + rom_a6h { + rom-addr = /bits/ 8 <0xa6>; + rom-val = /bits/ 8 <0x80>; + }; + rom_a7h { + rom-addr = /bits/ 8 <0xa7>; + rom-val = /bits/ 8 <0xf7>; + }; + rom_a9h { + rom-addr = /bits/ 8 <0xa9>; + rom-val = /bits/ 8 <0x80>; + }; + rom_aah { + rom-addr = /bits/ 8 <0xaa>; + rom-val = /bits/ 8 <0x0f>; + }; + rom_aeh { + rom-addr = /bits/ 8 <0xae>; + rom-val = /bits/ 8 <0x0f>; + }; + }; +}; + +&blsp2_uart1 { + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>; + + host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>; + }; +}; + +&otg { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; +}; + +&pm8941_coincell { + status = "okay"; + + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; + + bt_reg_on_pin: bt-reg-on { + pins = "gpio16"; + function = "normal"; + + output-low; + power-source = <PM8941_GPIO_S3>; + }; + + wlan_sleep_clk_pin: wl-sleep-clk { + pins = "gpio17"; + function = "func2"; + + output-high; + power-source = <PM8941_GPIO_S3>; + }; + + wlan_regulator_pin: wl-reg-active { + pins = "gpio18"; + function = "normal"; + + bias-disable; + power-source = <PM8941_GPIO_S3>; + }; + + lcd_dcdc_en_pin_a: lcd-dcdc-en-active { + pins = "gpio20"; + function = "normal"; + + bias-disable; + power-source = <PM8941_GPIO_S3>; + input-disable; + output-low; + }; + +}; + +&rpm_requests { + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <154000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s4: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <500000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + + pm8941_lvs3: lvs3 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; +}; + +&sdhc_3 { + status = "okay"; + + max-frequency = <100000000>; + vmmc-supply = <&vreg_wlan>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc3_on>; + + #address-cells = <1>; + #size-cells = <0>; + + bcrmf@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + brcm,drive-strength = <10>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin>; + }; +}; + +&smbb { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,dc-current-limit = <1800000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,fast-charge-low-threshold-voltage = <3400000>; + qcom,auto-recharge-threshold-voltage = <4200000>; + qcom,minimum-input-voltage = <4300000>; +}; + +&tlmm { + lcd_backlight_en_pin_a: lcd-backlight-vddio { + pins = "gpio69"; + drive-strength = <10>; + output-low; + bias-disable; + }; + + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + + cd { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + sdc3_on: sdc3-on { + clk { + pins = "gpio40"; + function = "sdc3"; + drive-strength = <10>; + bias-disable; + }; + + cmd { + pins = "gpio39"; + function = "sdc3"; + drive-strength = <10>; + bias-pull-up; + }; + + data { + pins = "gpio35", "gpio36", "gpio37", "gpio38"; + function = "sdc3"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + ts_int_pin: ts-int-pin { + pins = "gpio86"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + bt_host_wake_pin: bt-host-wake { + pins = "gpio95"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + bt_dev_wake_pin: bt-dev-wake { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974pro.dtsi b/arch/arm/boot/dts/qcom-msm8974pro.dtsi index b64c28036dd0..1e882e16a221 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974pro.dtsi @@ -1,23 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 #include "qcom-msm8974.dtsi" -/ { - soc { - sdhci@f9824900 { - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, - <&xo_board>, - <&gcc GCC_SDCC1_CDCCAL_FF_CLK>, - <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>; - clock-names = "core", "iface", "xo", "cal", "sleep"; - }; +&gcc { + compatible = "qcom,gcc-msm8974pro"; +}; - clock-controller@fc400000 { - compatible = "qcom,gcc-msm8974pro"; - }; +&gpu { + compatible = "qcom,adreno-330.2", "qcom,adreno"; +}; - adreno@fdb00000 { - compatible = "qcom,adreno-330.2", - "qcom,adreno"; - }; - }; +&sdhc_1 { + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>, + <&gcc GCC_SDCC1_CDCCAL_FF_CLK>, + <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>; + clock-names = "core", "iface", "xo", "cal", "sleep"; }; diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom-pm8226.dtsi index b3d0f7b5874d..9b7d9d04ded6 100644 --- a/arch/arm/boot/dts/qcom-pm8226.dtsi +++ b/arch/arm/boot/dts/qcom-pm8226.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/iio/qcom,spmi-vadc.h> &spmi_bus { pm8226_0: pm8226@0 { @@ -40,6 +41,46 @@ chg_otg: otg-vbus { }; }; + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pm8226_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@7 { + reg = <VADC_VSYS>; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; + adc-chan@8 { + reg = <VADC_DIE_TEMP>; + label = "die_temp"; + }; + adc-chan@9 { + reg = <VADC_REF_625MV>; + label = "ref_625mv"; + }; + adc-chan@a { + reg = <VADC_REF_1250MV>; + label = "ref_1250mv"; + }; + adc-chan@e { + reg = <VADC_GND_REF>; + }; + adc-chan@f { + reg = <VADC_VDD_VADC>; + }; + }; + pm8226_mpps: mpps@a000 { compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp"; reg = <0xa000>; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index da00b8f5eecd..cdd2bdb77b32 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -131,7 +131,7 @@ qcom,external-resistor-micro-ohms = <10000>; }; - coincell@2800 { + pm8941_coincell: coincell@2800 { compatible = "qcom,pm8941-coincell"; reg = <0x2800>; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-pmx65.dtsi b/arch/arm/boot/dts/qcom-pmx65.dtsi new file mode 100644 index 000000000000..5411b833d26e --- /dev/null +++ b/arch/arm/boot/dts/qcom-pmx65.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@1 { + compatible = "qcom,pmx65", "qcom,spmi-pmic"; + reg = <1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmx65_temp: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmx65_gpios: pinctrl@8800 { + compatible = "qcom,pmx65-gpio"; + reg = <0x8800>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi index d455795da44c..1c2b208a5670 100644 --- a/arch/arm/boot/dts/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -275,13 +275,6 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - ipa_virt: interconnect@1e00000 { - compatible = "qcom,sdx55-ipa-virt"; - reg = <0x01e00000 0x100000>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - qpic_bam: dma-controller@1b04000 { compatible = "qcom,bam-v1.7.0"; reg = <0x01b04000 0x1c000>; @@ -490,10 +483,13 @@ clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, <&gcc GCC_USB30_MASTER_CLK>, <&gcc GCC_USB30_MSTR_AXI_CLK>, - <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, <&gcc GCC_USB30_MASTER_CLK>; @@ -770,7 +766,7 @@ }; }; - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts index 59457da8e5f1..79dc31aa7cd1 100644 --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts @@ -5,6 +5,10 @@ /dts-v1/; #include "qcom-sdx65.dtsi" +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <arm64/qcom/pmk8350.dtsi> +#include <arm64/qcom/pm8150b.dtsi> +#include "qcom-pmx65.dtsi" / { model = "Qualcomm Technologies, Inc. SDX65 MTP"; @@ -18,8 +22,225 @@ chosen { stdout-path = "serial0:115200n8"; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mpss_dsm: memory@8c400000 { + no-map; + reg = <0x8c400000 0x3200000>; + }; + + ipa_fw_mem: memory@8fced000 { + no-map; + reg = <0x8fced000 0x10000>; + }; + + mpss_adsp_mem: memory@90800000 { + no-map; + reg = <0x90800000 0x10000000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_bob_3p3: pmx65_bob { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; }; &blsp1_uart3 { status = "ok"; }; + +&apps_rsc { + pmx65-rpmh-regulators { + compatible = "qcom,pmx65-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-supply = <&vreg_s2b_1p224>; + vdd-l2-l18-supply = <&vreg_s2b_1p224>; + vdd-l3-supply = <&vreg_s8b_0p824>; + vdd-l4-supply = <&vreg_s7b_0p936>; + vdd-l5-l6-l16-supply = <&vreg_s4b_1p824>; + vdd-l7-supply = <&vreg_s3b_0p776>; + vdd-l8-l9-supply = <&vreg_s8b_0p824>; + vdd-l10-supply = <&vreg_bob_3p3>; + vdd-l11-l13-supply = <&vreg_bob_3p3>; + vdd-l12-supply = <&vreg_s2b_1p224>; + vdd-l14-supply = <&vreg_s3b_0p776>; + vdd-l15-supply = <&vreg_s2b_1p224>; + vdd-l17-supply = <&vreg_s8b_0p824>; + vdd-l19-supply = <&vreg_s3b_0p776>; + vdd-l20-supply = <&vreg_s7b_0p936>; + vdd-l21-supply = <&vreg_s7b_0p936>; + + vreg_s2b_1p224: smps2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_s3b_0p776: smps3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + vreg_s4b_1p824: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2024000>; + }; + + vreg_s7b_0p936: smps7 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + vreg_s8b_0p824: smps8 { + regulator-min-microvolt = <304000>; + regulator-max-microvolt = <1300000>; + }; + + ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo2 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo3 { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo4 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo7 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo8 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo9 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo10 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo13 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo14 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo15 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo16 { + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1776000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo17 { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo19 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo20 { + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo21 { + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi index 796641d30e06..df6f9d6288fe 100644 --- a/arch/arm/boot/dts/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/clock/qcom,gcc-sdx65.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> / { @@ -60,11 +61,56 @@ #size-cells = <1>; ranges; + tz_heap_mem: memory@8fcad000 { + no-map; + reg = <0x8fcad000 0x40000>; + }; + + secdata_mem: memory@8fcfd000 { + no-map; + reg = <0x8fcfd000 0x1000>; + }; + + hyp_mem: memory@8fd00000 { + no-map; + reg = <0x8fd00000 0x80000>; + }; + + access_control_mem: memory@8fd80000 { + no-map; + reg = <0x8fd80000 0x80000>; + }; + + aop_mem: memory@8fe00000 { + no-map; + reg = <0x8fe00000 0x20000>; + }; + + smem_mem: memory@8fe20000 { + no-map; + reg = <0x8fe20000 0xc0000>; + }; + cmd_db: reserved-memory@8fee0000 { compatible = "qcom,cmd-db"; reg = <0x8fee0000 0x20000>; no-map; }; + + tz_mem: memory@8ff00000 { + no-map; + reg = <0x8ff00000 0x100000>; + }; + + tz_apps_mem: memory@90000000 { + no-map; + reg = <0x90000000 0x500000>; + }; + + llcc_tcm_mem: memory@15800000 { + no-map; + reg = <0x15800000 0x800000>; + }; }; soc: soc { @@ -91,6 +137,44 @@ status = "disabled"; }; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01f40000 0x40000>; + #hwlock-cells = <1>; + }; + + sdhc_1: sdhci@8804000 { + compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x08804000 0x1000>; + reg-names = "hc_mem"; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + spmi_bus: qcom,spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0xc440000 0xd00>, + <0xc600000 0x2000000>, + <0xe600000 0x100000>, + <0xe700000 0xa0000>, + <0xc40a000 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + interrupt-controller; + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + cell-index = <0>; + qcom,channel = <0>; + qcom,ee = <0>; + }; + tlmm: pinctrl@f100000 { compatible = "qcom,sdx65-tlmm"; reg = <0xf100000 0x300000>; @@ -112,6 +196,46 @@ interrupt-controller; }; + apps_smmu: iommu@15000000 { + compatible = "qcom,sdx65-smmu-500", "arm,mmu-500"; + reg = <0x15000000 0x40000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + }; + intc: interrupt-controller@17800000 { compatible = "qcom,msm-qgic2"; interrupt-controller; @@ -121,6 +245,23 @@ <0x17802000 0x1000>; }; + a7pll: clock@17808000 { + compatible = "qcom,sdx55-a7pll"; + reg = <0x17808000 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <0>; + }; + + apcs: mailbox@17810000 { + compatible = "qcom,sdx55-apcs-gcc", "syscon"; + reg = <0x17810000 0x2000>; + #mbox-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>; + clock-names = "ref", "pll", "aux"; + #clock-cells = <0>; + }; + timer@17820000 { #address-cells = <1>; #size-cells = <1>; @@ -202,12 +343,62 @@ <WAKE_TCS 2>, <CONTROL_TCS 1>; - rpmhcc: clock-controller@1 { + rpmhcc: clock-controller { compatible = "qcom,sdx65-rpmh-clk"; #clock-cells = <1>; clock-names = "xo"; clocks = <&xo_board>; }; + + rpmhpd: power-controller { + compatible = "qcom,sdx65-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 3502b5dcc04f..c0c145a5fe8d 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -140,6 +140,7 @@ compatible = "renesas,r8a7743-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi index f5d4b8b85b6d..3f4fb53dd6df 100644 --- a/arch/arm/boot/dts/r8a7744.dtsi +++ b/arch/arm/boot/dts/r8a7744.dtsi @@ -140,6 +140,7 @@ compatible = "renesas,r8a7744-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index f877c51f769c..fe8e98a66d93 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -270,6 +270,7 @@ rwdt: watchdog@e6020000 { compatible = "renesas,r8a7745-wdt", "renesas,rcar-gen2-wdt"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; reg = <0 0xe6020000 0 0x0c>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index 13ef1e9bf4d5..c90f2a270214 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -91,6 +91,7 @@ compatible = "renesas,r8a77470-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index ed6dd4fcc503..a640488d513b 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -274,6 +274,7 @@ compatible = "renesas,r8a7790-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 0ccc162d3c2c..542ed0a71872 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -161,6 +161,7 @@ compatible = "renesas,r8a7791-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 9cdb73894ac2..a6d9367f8fa0 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -111,6 +111,7 @@ compatible = "renesas,r8a7792-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index dea4b1e108af..9ebe7bfaf0ed 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -146,6 +146,7 @@ compatible = "renesas,r8a7793-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index eac9ed8df0be..b601ee6f7580 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -128,6 +128,7 @@ compatible = "renesas,r8a7794-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi index 636a6ab31c58..d3665910958b 100644 --- a/arch/arm/boot/dts/r9a06g032.dtsi +++ b/arch/arm/boot/dts/r9a06g032.dtsi @@ -66,6 +66,19 @@ interrupt-parent = <&gic>; ranges; + rtc0: rtc@40006000 { + compatible = "renesas,r9a06g032-rtc", "renesas,rzn1-rtc"; + reg = <0x40006000 0x1000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "alarm", "timer", "pps"; + clocks = <&sysctrl R9A06G032_HCLK_RTC>; + clock-names = "hclk"; + power-domains = <&sysctrl>; + status = "disabled"; + }; + wdt0: watchdog@40008000 { compatible = "renesas,r9a06g032-wdt", "renesas,rzn1-wdt"; reg = <0x40008000 0x1000>; @@ -87,10 +100,62 @@ reg = <0x4000c000 0x1000>; status = "okay"; #clock-cells = <1>; + #power-domain-cells = <0>; clocks = <&ext_mclk>, <&ext_rtc_clk>, <&ext_jtag_clk>, <&ext_rgmii_ref>; clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext"; + #address-cells = <1>; + #size-cells = <1>; + + dmamux: dma-router@a0 { + compatible = "renesas,rzn1-dmamux"; + reg = <0xa0 4>; + #dma-cells = <6>; + dma-requests = <32>; + dma-masters = <&dma0 &dma1>; + }; + }; + + pci_usb: pci@40030000 { + compatible = "renesas,pci-r9a06g032", "renesas,pci-rzn1"; + device_type = "pci"; + clocks = <&sysctrl R9A06G032_HCLK_USBH>, + <&sysctrl R9A06G032_HCLK_USBPM>, + <&sysctrl R9A06G032_CLK_PCI_USB>; + clock-names = "hclkh", "hclkpm", "pciclk"; + power-domains = <&sysctrl>; + reg = <0x40030000 0xc00>, + <0x40020000 0x1100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0x40020000 0x40020000 0 0x00010000>; + /* Should map all possible DDR as inbound ranges, but + * the IP only supports a 256MB, 512MB, or 1GB window. + * flags, PCI addr (64-bit), CPU addr, PCI size (64-bit) + */ + dma-ranges = <0x42000000 0 0x80000000 0x80000000 0 0x40000000>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usbphy>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usbphy>; + phy-names = "usb"; + }; }; uart0: serial@40060000 { @@ -134,6 +199,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -145,6 +212,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -156,6 +225,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -167,6 +238,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -178,6 +251,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -195,11 +270,40 @@ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&sysctrl R9A06G032_HCLK_NAND>, <&sysctrl R9A06G032_CLK_NAND>; clock-names = "hclk", "eclk"; + power-domains = <&sysctrl>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + dma0: dma-controller@40104000 { + compatible = "renesas,r9a06g032-dma", "renesas,rzn1-dma"; + reg = <0x40104000 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "hclk"; + clocks = <&sysctrl R9A06G032_HCLK_DMA0>; + dma-channels = <8>; + dma-requests = <16>; + dma-masters = <1>; + #dma-cells = <3>; + block_size = <0xfff>; + data-width = <8>; + }; + + dma1: dma-controller@40105000 { + compatible = "renesas,r9a06g032-dma", "renesas,rzn1-dma"; + reg = <0x40105000 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "hclk"; + clocks = <&sysctrl R9A06G032_HCLK_DMA1>; + dma-channels = <8>; + dma-requests = <16>; + dma-masters = <1>; + #dma-cells = <3>; + block_size = <0xfff>; + data-width = <8>; + }; + gic: interrupt-controller@44101000 { compatible = "arm,gic-400", "arm,cortex-a7-gic"; interrupt-controller; @@ -214,8 +318,7 @@ }; timer { - compatible = "arm,cortex-a7-timer", - "arm,armv7-timer"; + compatible = "arm,armv7-timer"; interrupt-parent = <&gic>; arm,cpu-registers-not-fw-configured; always-on; @@ -225,4 +328,10 @@ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; + + usbphy: usb-phy { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index ba2b8891bbb7..9b0f0497567d 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -330,6 +330,8 @@ cru: clock-controller@20000000 { compatible = "rockchip,rk3036-cru"; reg = <0x20000000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; @@ -556,7 +558,7 @@ status = "disabled"; }; - pdma: pdma@20078000 { + pdma: dma-controller@20078000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x20078000 0x4000>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, @@ -614,7 +616,7 @@ #interrupt-cells = <2>; }; - pcfg_pull_default: pcfg_pull_default { + pcfg_pull_default: pcfg-pull-default { bias-pull-pin-default; }; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index c25b9695db4b..de9915d946f7 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -202,8 +202,9 @@ cru: clock-controller@20000000 { compatible = "rockchip,rk3066a-cru"; reg = <0x20000000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; - #clock-cells = <1>; #reset-cells = <1>; assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>, diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts index 85d3fce0142f..35b7a5798eee 100644 --- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts +++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts @@ -7,6 +7,7 @@ /dts-v1/; #include <dt-bindings/i2c/i2c.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> #include "rk3188.dtsi" / { @@ -485,7 +486,7 @@ reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio3>; - interrupts = <RK_PD2 GPIO_ACTIVE_HIGH>; + interrupts = <RK_PD2 IRQ_TYPE_NONE>; interrupt-names = "host-wake"; brcm,drive-strength = <5>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index a94321e90014..cdd4a0bd5133 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -195,8 +195,9 @@ cru: clock-controller@20000000 { compatible = "rockchip,rk3188-cru"; reg = <0x20000000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; - #clock-cells = <1>; #reset-cells = <1>; }; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 5868eb512f69..ffc16d6b97e1 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -484,6 +484,8 @@ cru: clock-controller@110e0000 { compatible = "rockchip,rk3228-cru"; reg = <0x110e0000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; @@ -501,7 +503,7 @@ <75000000>; }; - pdma: pdma@110f0000 { + pdma: dma-controller@110f0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x110f0000 0x4000>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 26b9bbe310af..487b0e03d4b4 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -862,6 +862,8 @@ cru: clock-controller@ff760000 { compatible = "rockchip,rk3288-cru"; reg = <0x0 0xff760000 0x0 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index 448254906452..c158a7ea86ec 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -85,24 +85,6 @@ #clock-cells = <0>; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pdma: pdma@102a0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x102a0000 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC>; - clock-names = "apb_pclk"; - }; - }; - bus_intmem: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0x2000>; @@ -259,6 +241,17 @@ status = "disabled"; }; + pdma: dma-controller@102a0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x102a0000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + }; + grf: syscon@10300000 { compatible = "rockchip,rv1108-grf", "syscon", "simple-mfd"; reg = <0x10300000 0x1000>; @@ -456,6 +449,8 @@ cru: clock-controller@20200000 { compatible = "rockchip,rv1108-cru"; reg = <0x20200000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts index 54de3bc77c30..bc0b7354b6c0 100644 --- a/arch/arm/boot/dts/s5pv210-aquila.dts +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -29,8 +29,7 @@ memory@30000000 { device_type = "memory"; - reg = <0x30000000 0x05000000 - 0x40000000 0x18000000>; + reg = <0x30000000 0x05000000>, <0x40000000 0x18000000>; }; pmic_ap_clk: clock-0 { diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi index c8f1c324a6c2..daa1067055c8 100644 --- a/arch/arm/boot/dts/s5pv210-aries.dtsi +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -24,9 +24,9 @@ memory@30000000 { device_type = "memory"; - reg = <0x30000000 0x05000000 - 0x40000000 0x10000000 - 0x50000000 0x08000000>; + reg = <0x30000000 0x05000000>, + <0x40000000 0x10000000>, + <0x50000000 0x08000000>; }; reserved-memory { @@ -564,7 +564,6 @@ reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>; vdd3-supply = <&ldo7_reg>; vci-supply = <&ldo17_reg>; - spi-cs-high; spi-max-frequency = <1200000>; pinctrl-names = "default"; @@ -636,7 +635,7 @@ }; &i2s0 { - dmas = <&pdma0 9>, <&pdma0 10>, <&pdma0 11>; + dmas = <&pdma0 10>, <&pdma0 9>, <&pdma0 11>; status = "okay"; }; @@ -895,7 +894,7 @@ device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>; interrupt-parent = <&gph2>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wake"; + interrupt-names = "host-wakeup"; }; }; diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts index c6f39147cb96..d32f42dd1bf5 100644 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -30,9 +30,9 @@ memory@30000000 { device_type = "memory"; - reg = <0x30000000 0x05000000 - 0x40000000 0x10000000 - 0x50000000 0x08000000>; + reg = <0x30000000 0x05000000>, + <0x40000000 0x10000000>, + <0x50000000 0x08000000>; }; pmic_ap_clk: clock-0 { diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 353ba7b09a0c..f1b85aae8842 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -117,7 +117,7 @@ }; }; - pdma0: dma@e0900000 { + pdma0: dma-controller@e0900000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xe0900000 0x1000>; interrupt-parent = <&vic0>; @@ -125,11 +125,9 @@ clocks = <&clocks CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; - pdma1: dma@e0a00000 { + pdma1: dma-controller@e0a00000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xe0a00000 0x1000>; interrupt-parent = <&vic0>; @@ -137,8 +135,6 @@ clocks = <&clocks CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; adc: adc@e1700000 { @@ -239,8 +235,8 @@ reg = <0xeee30000 0x1000>; interrupt-parent = <&vic2>; interrupts = <16>; - dma-names = "rx", "tx", "tx-sec"; - dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>; + dma-names = "tx", "rx", "tx-sec"; + dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 11>; clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; @@ -259,8 +255,8 @@ reg = <0xe2100000 0x1000>; interrupt-parent = <&vic2>; interrupts = <17>; - dma-names = "rx", "tx"; - dmas = <&pdma1 12>, <&pdma1 13>; + dma-names = "tx", "rx"; + dmas = <&pdma1 13>, <&pdma1 12>; clock-names = "iis", "i2s_opclk0"; clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>; pinctrl-names = "default"; @@ -274,8 +270,8 @@ reg = <0xe2a00000 0x1000>; interrupt-parent = <&vic2>; interrupts = <18>; - dma-names = "rx", "tx"; - dmas = <&pdma1 14>, <&pdma1 15>; + dma-names = "tx", "rx"; + dmas = <&pdma1 15>, <&pdma1 14>; clock-names = "iis", "i2s_opclk0"; clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>; pinctrl-names = "default"; @@ -427,38 +423,28 @@ status = "disabled"; }; - ehci: ehci@ec200000 { + ehci: usb@ec200000 { compatible = "samsung,exynos4210-ehci"; reg = <0xec200000 0x100>; interrupts = <23>; interrupt-parent = <&vic1>; clocks = <&clocks CLK_USB_HOST>; clock-names = "usbhost"; - #address-cells = <1>; - #size-cells = <0>; + phys = <&usbphy 1>; + phy-names = "host"; status = "disabled"; - - port@0 { - reg = <0>; - phys = <&usbphy 1>; - }; }; - ohci: ohci@ec300000 { + ohci: usb@ec300000 { compatible = "samsung,exynos4210-ohci"; reg = <0xec300000 0x100>; interrupts = <23>; interrupt-parent = <&vic1>; clocks = <&clocks CLK_USB_HOST>; clock-names = "usbhost"; - #address-cells = <1>; - #size-cells = <0>; + phys = <&usbphy 1>; + phy-names = "host"; status = "disabled"; - - port@0 { - reg = <0>; - phys = <&usbphy 1>; - }; }; mfc: codec@f1700000 { @@ -528,7 +514,7 @@ clock-names = "sclk_fimg2d", "fimg2d"; }; - mdma1: mdma@fa200000 { + mdma1: dma-controller@fa200000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xfa200000 0x1000>; interrupt-parent = <&vic0>; @@ -536,8 +522,6 @@ clocks = <&clocks CLK_MDMA>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; }; rotator: rotator@fa300000 { diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi index 998629a3c34f..c328b67bea0c 100644 --- a/arch/arm/boot/dts/sam9x60.dtsi +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -684,7 +684,7 @@ status = "disabled"; }; - rtt: rtt@fffffe20 { + rtt: rtc@fffffe20 { compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; reg = <0xfffffe20 0x20>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index a499de8a7a64..3652c9e24124 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -26,7 +26,7 @@ spi0: spi@f0004000 { dmas = <0>, <0>; /* Do not use DMA for spi0 */ - m25p80@0 { + flash@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi index fa9e5e2a745d..5d9e97fecf83 100644 --- a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi @@ -25,7 +25,7 @@ spi0: spi@f0004000 { dmas = <0>, <0>; /* Do not use DMA for spi0 */ - m25p80@0 { + flash@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index 4decd3a91a76..a37e3a80392d 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -209,7 +209,7 @@ status = "disabled"; }; - rtt: rtt@e001d020 { + rtt: rtc@e001d020 { compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; reg = <0xe001d020 0x30>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; @@ -463,6 +463,30 @@ status = "disabled"; }; + pdmc0: sound@e1608000 { + compatible = "microchip,sama7g5-pdmc"; + reg = <0xe1608000 0x1000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + #sound-dai-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(37)>; + dma-names = "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 68>, <&pmc PMC_TYPE_GCK 68>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + + pdmc1: sound@e160c000 { + compatible = "microchip,sama7g5-pdmc"; + reg = <0xe160c000 0x1000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + #sound-dai-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(38)>; + dma-names = "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 69>, <&pmc PMC_TYPE_GCK 69>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + spdifrx: spdifrx@e1614000 { #sound-dai-cells = <0>; compatible = "microchip,sama7g5-spdifrx"; @@ -601,9 +625,9 @@ #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; atmel,fifo-size = <32>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, - <&dma0 AT91_XDMAC_DT_PERID(8)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>, + <&dma0 AT91_XDMAC_DT_PERID(7)>; + dma-names = "tx", "rx"; status = "disabled"; }; }; @@ -786,9 +810,9 @@ #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 46>; atmel,fifo-size = <32>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>, - <&dma0 AT91_XDMAC_DT_PERID(22)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>, + <&dma0 AT91_XDMAC_DT_PERID(21)>; + dma-names = "tx", "rx"; status = "disabled"; }; }; @@ -810,9 +834,9 @@ #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; atmel,fifo-size = <32>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>, - <&dma0 AT91_XDMAC_DT_PERID(24)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>, + <&dma0 AT91_XDMAC_DT_PERID(23)>; + dma-names = "tx", "rx"; status = "disabled"; }; }; @@ -857,7 +881,6 @@ #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; - interrupt-parent; reg = <0xe8c11000 0x1000>, <0xe8c12000 0x2000>; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 7c1d6423d7f8..bfaef45bdd04 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -46,7 +46,7 @@ <0xff113000 0x1000>; }; - intc: intc@fffed000 { + intc: interrupt-controller@fffed000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -80,8 +80,6 @@ <0 110 4>, <0 111 4>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&l4_main_clk>; clock-names = "apb_pclk"; resets = <&rst DMA_RESET>; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 3ba431dfa8c9..26bda2557fe8 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -38,7 +38,7 @@ <0xff113000 0x1000>; }; - intc: intc@ffffd000 { + intc: interrupt-controller@ffffd000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -73,8 +73,6 @@ <0 90 IRQ_TYPE_LEVEL_HIGH>, <0 91 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&l4_main_clk>; clock-names = "apb_pclk"; resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts index 2a745522404d..11ccdc6c2dc6 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts @@ -9,7 +9,7 @@ &qspi { status = "okay"; - flash0: n25q00@0 { + flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,mt25qu02g", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index 253ef139181d..b2241205c7a9 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -121,7 +121,7 @@ &qspi { status = "okay"; - flash0: n25q00@0 { + flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,mt25qu02g", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts index b0003f350e65..2564671fc1c6 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts @@ -113,7 +113,7 @@ &qspi { status = "okay"; - flash0: n25q512a@0 { + flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q512a", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index 25874e1b9c82..f24f17c2f5ee 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -221,7 +221,7 @@ &qspi { status = "okay"; - n25q128@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q128", "jedec,spi-nor"; @@ -238,7 +238,7 @@ cdns,tslch-ns = <4>; }; - n25q00@1 { + flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,mt25qu02g", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index 4cbadcb41084..ddd1cf4d0554 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -379,7 +379,7 @@ }; }; - m25p80@1 { + flash@1 { compatible = "st,m25p80"; reg = <1>; spi-max-frequency = <12000000>; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index fd194ebeedc9..3a51a41eb5e4 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -439,7 +439,7 @@ cs-gpios = <&gpiopinctrl 80 0>, <&gpiopinctrl 24 0>, <&gpiopinctrl 85 0>; - m25p80@0 { + flash@0 { compatible = "m25p80"; reg = <0>; spi-max-frequency = <12000000>; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index dc0bcc7020f1..c28b32640254 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -755,7 +755,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */ <&dma 8 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; @@ -772,7 +772,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */ <&dma 9 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; @@ -790,7 +790,7 @@ #size-cells = <0>; /* Same clock wired to kernel and pclk */ clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */ <&dma 0 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; @@ -807,7 +807,7 @@ #size-cells = <0>; /* Same clock wired to kernel and pclk */ clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */ <&dma 35 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; @@ -824,7 +824,7 @@ #size-cells = <0>; /* Same clock wired to kernel and pclk */ clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */ <&dma 33 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; @@ -841,7 +841,7 @@ #size-cells = <0>; /* Same clock wired to kernel and pclk */ clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */ <&dma 40 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts new file mode 100644 index 000000000000..d6940e0afa86 --- /dev/null +++ b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts @@ -0,0 +1,785 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Devicetree for the Samsung Galaxy Exhibit SGH-T599 also known as Codina-TMO, + * the "TMO" shall be read "T-Mobile" as this phone was produced exlusively + * for T-Mobile in the United States. + * + * This phone is closely related to the Codina, but has: + * - No CPU speed cap, full ~1GHz rate + * - Different power management IC, AB8505 + * - As AB8505 has a micro USB phy, no TI TSU6111 + * - Different power routing such as the removal of the external LDO for the + * touchscreen in favor of using the AB8505 + * - Using a regulator for the key backlight LED + * - Using the Samsung S6D27A1 panel by default + * - The panel is using one of the ordinary AB8505 regulators for 1.8V + * - WiFi/Bluetooth combi chip upgraded to BCM4334 + * - GPIO for backlight control moved from 68 to 69 + */ + +/dts-v1/; +#include "ste-db8500.dtsi" +#include "ste-ab8505.dtsi" +#include "ste-dbx5x0-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Samsung Galaxy Exhibit (SGH-T599)"; + compatible = "samsung,codina-tmo", "st-ericsson,u8500"; + + chosen { + stdout-path = &serial2; + }; + + battery: battery { + compatible = "samsung,eb425161lu"; + }; + + thermal-zones { + battery-thermal { + /* This zone will be polled by the battery temperature code */ + polling-delay = <0>; + polling-delay-passive = <0>; + thermal-sensors = <&bat_therm>; + }; + }; + + bat_therm: thermistor { + compatible = "samsung,1404-001221"; + io-channels = <&gpadc 0x02>; /* BatTemp */ + pullup-uv = <1800000>; + pullup-ohm = <230000>; + pulldown-ohm = <0>; + #thermal-sensor-cells = <0>; + }; + + /* TI TXS0206 level translator for 2.9 V */ + sd_level_translator: regulator-gpio { + compatible = "regulator-fixed"; + + /* GPIO87 EN */ + gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + + regulator-name = "sd-level-translator"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-type = "voltage"; + + startup-delay-us = <200>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd_level_translator_default>; + }; + + /* External LDO MIC5366-3.3YMT for eMMC */ + ldo_3v3_reg: regulator-gpio-ldo-3v3 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "VMEM_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>; + startup-delay-us = <5000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_ldo_en_default_mode>; + }; + + /* + * External Ricoh RP152L010B-TR LCD LDO regulator for the display. + * LCD_PWR_EN controls both the 3.0V output. + */ + lcd_3v0_reg: regulator-gpio-lcd-3v0 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "VREG_LCD_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + /* GPIO219 controls this regulator */ + gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pwr_en_default_mode>; + }; + + /* + * This regulator is a GPIO line that drives the Broadcom WLAN + * line WL_REG_ON high and enables the internal regulators + * inside the chip. Unfortunatley it is erroneously named + * WLAN_RST_N on the schematic but it is not a reset line. + * + * The voltage specified here is only used to determine the OCR mask, + * the for the SDIO connector, the chip is actually connected + * directly to VBAT. + */ + wl_reg: regulator-gpio-wlan { + compatible = "regulator-fixed"; + regulator-name = "WL_REG_ON"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + startup-delay-us = <100000>; + /* GPIO215 (WLAN_RST_N to WL_REG_ON) */ + gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_ldo_en_default>; + }; + + vibrator { + compatible = "gpio-vibrator"; + /* GPIO195 "MOT_EN" */ + enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_default>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default_mode>; + + button-home { + linux,code = <KEY_HOME>; + label = "HOME"; + /* GPIO91 */ + gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + }; + button-volup { + linux,code = <KEY_VOLUMEUP>; + label = "VOL+"; + /* GPIO67 */ + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + button-voldown { + linux,code = <KEY_VOLUMEDOWN>; + label = "VOL-"; + /* GPIO92 */ + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + }; + }; + + led-touchkeys { + compatible = "regulator-led"; + vled-supply = <&ab8500_ldo_aux4_reg>; // 3.3V + default-state = "on"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + }; + + ktd253: backlight { + compatible = "kinetic,ktd253"; + /* GPIO69 is used on Codina R0.4 and Codina TMO */ + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + /* Default to 13/32 brightness */ + default-brightness = <13>; + pinctrl-names = "default"; + pinctrl-0 = <&ktd253_backlight_default_mode>; + }; + + /* Richtek RT8515GQW Flash LED Driver IC */ + flash { + compatible = "richtek,rt8515"; + /* GPIO 140 */ + enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + /* GPIO 141 */ + ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + /* + * RFS is 16 kOhm and RTS is 100 kOhm giving + * the flash max current 343mA and torch max + * current 55 mA. + */ + richtek,rfs-ohms = <16000>; + richtek,rts-ohms = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_flash_default_mode>; + + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + flash-max-microamp = <343750>; + led-max-microamp = <55000>; + }; + }; + + /* Bit-banged I2C on GPIO143 and GPIO144 also called "SUBPMU I2C" */ + i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_0_default>; + #address-cells = <1>; + #size-cells = <0>; + + /* TODO: this should also be used by the SM5103 Camera power management unit */ + }; + + /* Bit-banged I2C on GPIO151 and GPIO152 also called "COMP I2C" */ + i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_1_default>; + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@c { + compatible = "alps,hscdtd008a"; + reg = <0x0c>; + clock-frequency = <400000>; + + avdd-supply = <&ab8500_ldo_aux1_reg>; // 3V + dvdd-supply = <&ab8500_ldo_aux8_reg>; // 1.8V + }; + }; + + spi-gpio-0 { + compatible = "spi-gpio"; + /* Clock on GPIO220, pin SCL */ + sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>; + /* MOSI on GPIO224, pin SDI "slave data in" */ + mosi-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + /* MISO on GPIO225, pin SDO "slave data out" */ + miso-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + /* Chip select on GPIO201 */ + cs-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&spi_gpio_0_default>; + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6d27a1"; + spi-max-frequency = <1200000>; + /* TYPE 3: inverse clock polarity and phase */ + spi-cpha; + spi-cpol; + + reg = <0>; + vci-supply = <&lcd_3v0_reg>; + vccio-supply = <&ab8500_ldo_aux6_reg>; + + /* Reset on GPIO139 */ + reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + /* LCD_VGH/LCD_DETECT, ESD IRQ on GPIO93 */ + interrupt-parent = <&gpio2>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_default_mode>; + backlight = <&ktd253>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + }; + + soc { + /* External Micro SD slot */ + mmc@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + st,sig-pin-fbclk; + full-pwr-cycle; + /* MMC is powered by AUX3 1.2V .. 2.91V */ + vmmc-supply = <&ab8500_ldo_aux3_reg>; + /* 2.9 V level translator is using AUX3 at 2.9 V as well */ + vqmmc-supply = <&sd_level_translator>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc0_a_2_default>; + pinctrl-1 = <&mc0_a_2_sleep>; + cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 + status = "okay"; + }; + + /* WLAN SDIO channel */ + mmc@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + non-removable; + cap-sd-highspeed; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc1_a_2_default>; + pinctrl-1 = <&mc1_a_2_sleep>; + /* + * GPIO-controlled voltage enablement: this drives + * the WL_REG_ON line high when we use this device. + * Represented as regulator to fill OCR mask. + */ + vmmc-supply = <&wl_reg>; + + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + /* GPIO216 WL_HOST_WAKE */ + interrupt-parent = <&gpio6>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_mode>; + }; + }; + + /* eMMC */ + mmc@80005000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + non-removable; + cap-mmc-highspeed; + mmc-ddr-1_8v; + no-sdio; + no-sd; + vmmc-supply = <&ldo_3v3_reg>; + pinctrl-names = "default", "sleep"; + /* + * GPIO130 will be set to input no pull-up resulting in a resistor + * pulling the reset high and taking the memory out of reset. + */ + pinctrl-0 = <&mc2_a_1_default>; + pinctrl-1 = <&mc2_a_1_sleep>; + status = "okay"; + }; + + /* GBF (Bluetooth) UART */ + uart@80120000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u0_a_1_default>; + pinctrl-1 = <&u0_a_1_sleep>; + status = "okay"; + + bluetooth { + /* BCM4334B0 actually */ + compatible = "brcm,bcm4330-bt"; + /* GPIO222 rail BT_VREG_EN to BT_REG_ON */ + shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; + /* BT_WAKE on GPIO199 */ + device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + /* BT_HOST_WAKE on GPIO97 */ + /* FIXME: convert to interrupt */ + host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + /* BT_RST_N on GPIO209 */ + reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_mode>; + }; + }; + + /* GPS UART */ + uart@80121000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + /* CTS/RTS is not used, CTS is repurposed as GPIO */ + pinctrl-0 = <&u1rxtx_a_1_default>; + pinctrl-1 = <&u1rxtx_a_1_sleep>; + /* FIXME: add a device for the GPS here */ + }; + + /* Debugging console UART connected to AB8505 */ + uart@80007000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u2rxtx_c_1_default>; + pinctrl-1 = <&u2rxtx_c_1_sleep>; + }; + + prcmu@80157000 { + ab8505 { + phy { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb_a_1_default>; + pinctrl-1 = <&usb_a_1_sleep>; + }; + + ab8500_fg { + line-impedance-micro-ohms = <36000>; + }; + + /* This is mostly identical to the Codina v0.4 regulators */ + regulator { + ab8500_ldo_aux1 { + regulator-name = "v-sensors-vdd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux2 { + regulator-name = "v-aux2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux3 { + regulator-name = "v-mmc-sd"; + }; + + ab8500_ldo_aux4 { + regulator-name = "v-aux4"; + /* + * Providing some span here makes the touchkey + * LEDs actually dimmable. + */ + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux5 { + regulator-name = "v-aux5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ab8500_ldo_aux6 { + /* 1.8 V to the display */ + regulator-name = "v-aux6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ab8500_ldo_aux8 { + regulator-name = "v-sensors-vio"; + }; + }; + }; + }; + + /* I2C0 also known as "AGC I2C" */ + i2c@80004000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c0_a_1_default>; + pinctrl-1 = <&i2c0_a_1_sleep>; + + proximity@39 { + /* Codina has the Amstaos TMD2672 */ + compatible = "amstaos,tmd2672"; + clock-frequency = <400000>; + reg = <0x39>; + + /* IRQ on GPIO146 "PS_INT" */ + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&ab8500_ldo_aux8_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&tmd2672_codina_default>; + }; + }; + + /* I2C2 on GPIO10 and GPIO11 also called "SENSORS I2C" */ + i2c@80128000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_b_2_default>; + pinctrl-1 = <&i2c2_b_2_sleep>; + + /* Bosch BMA254 accelerometer */ + accelerometer@18 { + compatible = "bosch,bma254"; + reg = <0x18>; + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + vddio-supply = <&ab8500_ldo_aux8_reg>; // 1.8V + vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V + }; + }; + + /* I2C3 */ + i2c@80110000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c3_c_2_default>; + pinctrl-1 = <&i2c3_c_2_sleep>; + + /* TODO: write bindings and driver for this touchscreen */ + + /* Zinitix BT404 ISP part */ + isp@50 { + compatible = "zinitix,bt404-isp"; + reg = <0x50>; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_default>; + }; + + /* Zinitix BT404 touchscreen, also has the touchkeys for menu and back */ + touchscreen@20 { + compatible = "zinitix,bt404"; + reg = <0x20>; + /* GPIO218 (TSP_INT_1V8) */ + interrupt-parent = <&gpio6>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + vcca-supply = <&ab8500_ldo_aux2_reg>; // 3.3V + vdd-supply = <&ab8500_ldo_aux5_reg>; // 1.8V + zinitix,mode = <2>; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_default>; + }; + }; + + mcde@a0350000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dpi_default_mode>; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; +}; + +&pinctrl { + /* + * This extends the MC0_A_2 default config to include + * the card detect GPIO217 line. + */ + sdi0 { + mc0_a_2_default { + default_cfg4 { + pins = "GPIO217_AH12"; /* card detect */ + ste,config = <&gpio_in_pd>; + }; + }; + }; + sdi2 { + /* + * GPIO130 should be set in GPIO mode and + * pulled down. (Not connected.) + */ + mc2_a_1_default { + default_cfg2 { + pins = "GPIO130_C8"; /* FBCLK */ + ste,config = <&gpio_in_pd>; + }; + }; + }; + /* GPIO that enables the 2.9V SD card level translator */ + sd-level-translator { + sd_level_translator_default: sd_level_translator_default { + /* level shifter on GPIO87 */ + codina_cfg1 { + pins = "GPIO87_B3"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO that enables the LDO regulator for the eMMC */ + emmc-ldo { + emmc_ldo_en_default_mode: emmc_ldo_default { + /* LDO enable on GPIO223 */ + codina_cfg1 { + pins = "GPIO223_AH9"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIOs for panel control */ + panel { + panel_default_mode: panel_default { + codina_cfg1 { + /* Reset line */ + pins = "GPIO139_C9"; + ste,config = <&gpio_out_lo>; + }; + codina_cfg2 { + /* ESD IRQ line "LCD detect" */ + pins = "GPIO93_B7"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO that enables the LDO regulator for the LCD display */ + lcd-ldo { + lcd_pwr_en_default_mode: lcd_pwr_en_default { + /* LCD_PWR_EN on GPIO219 */ + codina_cfg1 { + pins = "GPIO219_AG10"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO that enables the WLAN internal LDO regulators */ + wlan-ldo { + wlan_ldo_en_default: wlan_ldo_default { + /* GPIO215 named WLAN_RST_N */ + codina_cfg1 { + pins = "GPIO215_AH13"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* Backlight GPIO */ + backlight { + ktd253_backlight_default_mode: backlight_default { + skomer_cfg1 { + pins = "GPIO69_E2"; /* LCD_BL_CTRL */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* Flash and torch */ + flash { + gpio_flash_default_mode: flash_default { + codina_cfg1 { + pins = "GPIO140_B11", "GPIO141_C12"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* GPIO keys */ + gpio-keys { + gpio_keys_default_mode: gpio_keys_default { + skomer_cfg1 { + pins = "GPIO67_G2", /* VOL UP */ + "GPIO91_B6", /* HOME */ + "GPIO92_D6"; /* VOL DOWN */ + ste,config = <&gpio_in_pu>; + }; + }; + }; + /* Interrupt line for the Zinitix BT404 touchscreen */ + tsp { + tsp_default: tsp_default { + codina_cfg1 { + pins = "GPIO218_AH11"; /* TSP_INT_1V8 */ + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* Interrupt line for light/proximity sensor TMD2672 */ + tmd2672 { + tmd2672_codina_default: tmd2672_codina { + codina_cfg1 { + pins = "GPIO146_D13"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for subpmu */ + i2c-gpio-0 { + i2c_gpio_0_default: i2c_gpio_0 { + codina_cfg1 { + pins = "GPIO143_D12", "GPIO144_B13"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for the NFC */ + i2c-gpio-1 { + i2c_gpio_1_default: i2c_gpio_1 { + codina_cfg1 { + pins = "GPIO151_D17", "GPIO152_D16"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based SPI bus for the display */ + spi-gpio-0 { + spi_gpio_0_default: spi_gpio_0_d { + codina_cfg1 { + pins = "GPIO220_AH10", "GPIO201_AF24", "GPIO224_AG9"; + ste,config = <&gpio_out_hi>; + }; + codina_cfg2 { + pins = "GPIO225_AG8"; + /* Needs pull down, no pull down resistor on board */ + ste,config = <&gpio_in_pd>; + }; + }; + spi_gpio_0_sleep: spi_gpio_0_s { + codina_cfg1 { + pins = "GPIO220_AH10", "GPIO201_AF24", + "GPIO224_AG9", "GPIO225_AG8"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + wlan { + wlan_default_mode: wlan_default { + /* GPIO216 for WL_HOST_WAKE */ + codina_cfg2 { + pins = "GPIO216_AG12"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + bluetooth { + bluetooth_default_mode: bluetooth_default { + /* GPIO199 BT_WAKE and GPIO222 BT_VREG_ON */ + codina_cfg1 { + pins = "GPIO199_AH23", "GPIO222_AJ9"; + ste,config = <&gpio_out_lo>; + }; + /* GPIO97 BT_HOST_WAKE */ + codina_cfg2 { + pins = "GPIO97_D9"; + ste,config = <&gpio_in_nopull>; + }; + /* GPIO209 BT_RST_N */ + codina_cfg3 { + pins = "GPIO209_AG15"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + vibrator { + vibrator_default: vibrator_default { + codina_cfg1 { + pins = "GPIO195_AG28"; /* MOT_EN */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + mcde { + dpi_default_mode: dpi_default { + default_mux1 { + /* Mux in all the data lines */ + function = "lcd"; + groups = + /* Data lines D0-D7 GPIO70..GPIO77 */ + "lcd_d0_d7_a_1", + /* Data lines D8-D11 GPIO78..GPIO81 */ + "lcd_d8_d11_a_1", + /* Data lines D12-D15 GPIO82..GPIO85 */ + "lcd_d12_d15_a_1", + /* Data lines D16-D23 GPIO161..GPIO168 */ + "lcd_d16_d23_b_1"; + }; + default_mux2 { + function = "lcda"; + /* Clock line on GPIO150, DE, VSO, HSO on GPIO169..GPIO171 */ + groups = "lcdaclk_b_1", "lcda_b_1"; + }; + /* Input, no pull-up is the default state for pins used for an alt function */ + default_cfg1 { + pins = "GPIO150_C14", "GPIO169_D22", "GPIO170_C23", "GPIO171_D23"; + ste,config = <&in_nopull>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts index 1c1725d31c7c..b6746ac167bc 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts @@ -9,9 +9,13 @@ * the boot loader. * * The Samsung tree further talks about GT-I8160P and GT-I8160chn (China). - * The GT-I8160 plain is knonw as the "europe" variant. - * The GT-I8160P appears to not use the ST Microelectronics accelerometer. + * The GT-I8160 plain is known as the "europe" variant. + * The GT-I8160P is the CDMA version and it appears to not use the ST + * Microelectronics accelerometer and reportedly has NFC mounted. * The GT-I8160chn appears to be the same as the europe variant. + * + * There is also the Codina-TMO, Samsung SGH-T599, which has its own device + * tree. */ /dts-v1/; @@ -303,7 +307,22 @@ #address-cells = <1>; #size-cells = <0>; - /* TODO: add the NFC chip here */ + nfc@2b { + /* NXP NFC circuit PN544 C1 marked NXP 44501 */ + compatible = "nxp,pn544-i2c"; + /* IF0, IF1 high, gives I2C address 0x2B */ + reg = <0x2b>; + clock-frequency = <400000>; + /* NFC IRQ on GPIO32 */ + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + /* GPIO 31 */ + firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; + /* GPIO88 */ + enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pn544_codina_default>; + }; }; spi-gpio-0 { @@ -461,10 +480,20 @@ uart@80121000 { status = "okay"; pinctrl-names = "default", "sleep"; - /* CTS/RTS is not used, CTS is repurposed as GPIO */ - pinctrl-0 = <&u1rxtx_a_1_default>; - pinctrl-1 = <&u1rxtx_a_1_sleep>; - /* FIXME: add a device for the GPS here */ + pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>; + pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>; + + gnss { + compatible = "brcm,bcm4751"; + /* GPS_RSTN on GPIO21 */ + reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + /* GPS_ON_OFF on GPIO86 */ + enable-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + /* GPS_1V8 (VSMPS2) */ + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&bcm4751_codina_default>; + }; }; /* Debugging console UART connected to TSU6111RSVR (FSA880) */ @@ -483,6 +512,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <36000>; + }; + regulator { ab8500_ldo_aux1 { /* Used for VDD for sensors */ @@ -515,10 +548,9 @@ pinctrl-0 = <&i2c0_a_1_default>; pinctrl-1 = <&i2c0_a_1_sleep>; - /* TODO: write bindings and driver for this proximity sensor */ proximity@39 { - /* Codina has the Mouser TMD2672 */ - compatible = "mouser,tmd2672"; + /* Codina has the Amstaos TMD2672 */ + compatible = "amstaos,tmd2672"; clock-frequency = <400000>; reg = <0x39>; @@ -847,6 +879,34 @@ }; }; }; + nfc { + pn544_codina_default: pn544_codina { + /* Interrupt line */ + codina_cfg1 { + pins = "GPIO32_V2"; + ste,config = <&gpio_in_nopull>; + }; + /* Enable and firmware GPIOs */ + codina_cfg2 { + pins = "GPIO31_V3", "GPIO88_C4"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + bcm4751 { + bcm4751_codina_default: bcm4751_codina { + /* Reset line, start out asserted */ + codina_cfg1 { + pins = "GPIO21_AB3"; + ste,config = <&gpio_out_lo>; + }; + /* GPS_ON_OFF, start out deasserted (off) */ + codina_cfg2 { + pins = "GPIO86_C6"; + ste,config = <&gpio_out_lo>; + }; + }; + }; vibrator { vibrator_default: vibrator_default { codina_cfg1 { diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts index fd170974765f..53062d50e455 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts @@ -456,6 +456,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <43000>; + }; + regulator { ab8500_ldo_aux1 { /* Used for VDD for sensors */ diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts index 290ab59e863d..b0dce91aff4b 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -304,6 +304,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <36000>; + }; + regulator { ab8500_ldo_aux1 { regulator-name = "sensor_3v"; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts index 42762bfcd878..e6d4fd0eb5f4 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts @@ -485,7 +485,26 @@ /* CTS/RTS is not used, CTS is repurposed as GPIO */ pinctrl-0 = <&u1rxtx_a_1_default>; pinctrl-1 = <&u1rxtx_a_1_sleep>; - /* FIXME: add a device for the GPS here */ + + gnss { + /* + * The Low Noise Amplifier (LNA) power and enablement is controlled + * autonomously by the GSD4t. + * Janice has a SiRFstarIV-based GSD4t + * Golden has a SiRFstarV 5t-based CSRG05TA03-ICJE-R. + */ + compatible = "csr,gsd4t"; + /* GPS_RSTN on GPIO21 */ + reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + /* GPS_ON_OFF on GPIO96 */ + sirf,onoff-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + /* GPS_1V8 (VSMPS2) */ + vcc-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&gsd4t_janice_default>; + /* According to /etc/sirfgps.conf */ + current-speed = <460800>; + }; }; /* Debugging console UART connected to TSU6111RSVR (FSA880) */ @@ -504,6 +523,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <15000>; + }; + regulator { ab8500_ldo_aux1 { /* Used for VDD for sensors */ @@ -941,4 +964,23 @@ }; }; }; + gsd4t { + gsd4t_janice_default: gsd4t_janice { + /* Reset line, start out asserted */ + janice_cfg1 { + pins = "GPIO21_AB3"; + ste,config = <&gpio_out_lo>; + }; + /* GPS_ON_OFF, start out deasserted (off) */ + janice_cfg2 { + pins = "GPIO96_D8"; + ste,config = <&gpio_out_lo>; + }; + /* Unused power enablement line, used in R0.0 and R0.1 boards */ + janice_cfg3 { + pins = "GPIO86_C6"; + ste,config = <&gpio_in_pd>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts index 2a5bf54137ce..c57676faf181 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts @@ -325,6 +325,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <36000>; + }; + regulator { ab8500_ldo_aux1 { /* Used for VDD for sensors */ diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts index dcb03ce7cbd4..81b341a5ae45 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -281,12 +281,27 @@ }; }; - /* GPF UART */ + /* GPS UART */ uart@80121000 { status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>; pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>; + + gnss { + /* The CSRG05TA03-ICJE-R is a SirfStarV 5t chip */ + compatible = "csr,csrg05ta03-icje-r"; + /* GPS_RSTN on GPIO209 */ + reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; + /* GPS_ON_OFF on GPIO86 */ + sirf,onoff-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + /* GPS_1V8 (VSMPS2) */ + vcc-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&g05ta03_skomer_default>; + /* According to /etc/sirfgps.conf */ + current-speed = <460800>; + }; }; /* Debugging console UART connected to AB8505 USB */ @@ -305,6 +320,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <16000>; + }; + regulator { ab8500_ldo_aux1 { /* Used for VDD for sensors */ @@ -649,6 +668,20 @@ }; }; }; + g05ta03 { + g05ta03_skomer_default: g05ta03 { + /* Reset line, start out de-asserted */ + skomer_cfg1 { + pins = "GPIO209_AG15"; + ste,config = <&gpio_out_hi>; + }; + /* GPS_ON_OFF, start out deasserted (off) */ + skomer_cfg2 { + pins = "GPIO86_C6"; + ste,config = <&gpio_out_lo>; + }; + }; + }; }; &ab8505_gpio { diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi index 155d9ffacc83..500bcc302d42 100644 --- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi @@ -45,7 +45,7 @@ / { soc { - pinctrl: pin-controller@40020000 { + pinctrl: pinctrl@40020000 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0x40020000 0x3000>; diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi index 1cf8a23c2644..8f37aefa7315 100644 --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi @@ -9,7 +9,7 @@ / { soc { - pinctrl: pin-controller@40020000 { + pinctrl: pinctrl@40020000 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0x40020000 0x3000>; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 6e42ca2dada2..91dde07a38ba 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -583,7 +583,7 @@ status = "disabled"; }; - pinctrl: pin-controller@58020000 { + pinctrl: pinctrl@58020000 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32h743-pinctrl"; diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi index 1708c79b5254..f9ebc47e6421 100644 --- a/arch/arm/boot/dts/stm32mp131.dtsi +++ b/arch/arm/boot/dts/stm32mp131.dtsi @@ -75,6 +75,12 @@ compatible = "fixed-clock"; clock-frequency = <99000000>; }; + + clk_rtc_k: clk-rtc-k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; }; intc: interrupt-controller@a0021000 { @@ -218,6 +224,15 @@ status = "disabled"; }; + rtc: rtc@5c004000 { + compatible = "st,stm32mp1-rtc"; + reg = <0x5c004000 0x400>; + interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_pclk4>, <&clk_rtc_k>; + clock-names = "pclk", "rtc_ck"; + status = "disabled"; + }; + bsec: efuse@5c005000 { compatible = "st,stm32mp15-bsec"; reg = <0x5c005000 0x400>; @@ -239,11 +254,13 @@ * Break node order to solve dependency probe issue between * pinctrl and exti. */ - pinctrl: pin-controller@50002000 { + pinctrl: pinctrl@50002000 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32mp135-pinctrl"; ranges = <0 0x50002000 0x8400>; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; pins-are-numbered; gpioa: gpio@50002000 { diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts index ee100d108ea2..09d6226d598f 100644 --- a/arch/arm/boot/dts/stm32mp135f-dk.dts +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts @@ -6,6 +6,9 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include "stm32mp135.dtsi" #include "stm32mp13xf.dtsi" #include "stm32mp13-pinctrl.dtsi" @@ -23,6 +26,28 @@ reg = <0xc0000000 0x20000000>; }; + gpio-keys { + compatible = "gpio-keys"; + + user-pa13 { + label = "User-PA13"; + linux,code = <BTN_1>; + gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + vdd_sd: vdd-sd { compatible = "regulator-fixed"; regulator-name = "vdd_sd"; @@ -37,6 +62,10 @@ status = "okay"; }; +&rtc { + status = "okay"; +}; + &sdmmc1 { pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index f0d66d8c6e3b..6052243ad81c 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -379,6 +379,40 @@ }; }; + ethernet0_rmii_pins_c: rmii-2 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ + bias-disable; + }; + }; + + ethernet0_rmii_sleep_pins_c: rmii-sleep-2 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ + }; + }; + fmc_pins_a: fmc-0 { pins1 { pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */ @@ -889,6 +923,21 @@ }; }; + mco2_pins_a: mco2-0 { + pins { + pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + mco2_sleep_pins_a: mco2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('G', 2, ANALOG)>; /* MCO2 */ + }; + }; + m_can1_pins_a: m-can1-0 { pins1 { pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ @@ -2212,4 +2261,19 @@ bias-disable; }; }; + + spi1_pins_b: spi1-1 { + pins1 { + pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */ + <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */ + bias-disable; + }; + }; }; diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index f9aa9af31efd..1b2fd3426a81 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -115,6 +115,33 @@ status = "disabled"; }; + firmware { + optee: optee { + compatible = "linaro,optee-tz"; + method = "smc"; + status = "disabled"; + }; + + scmi: scmi { + compatible = "linaro,scmi-optee"; + #address-cells = <1>; + #size-cells = <0>; + linaro,optee-channel-id = <0>; + shmem = <&scmi_shm>; + status = "disabled"; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + + scmi_reset: protocol@16 { + reg = <0x16>; + #reset-cells = <1>; + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -122,6 +149,20 @@ interrupt-parent = <&intc>; ranges; + scmi_sram: sram@2ffff000 { + compatible = "mmio-sram"; + reg = <0x2ffff000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2ffff000 0x1000>; + + scmi_shm: scmi-sram@0 { + compatible = "arm,scmi-shmem"; + reg = <0 0x80>; + status = "disabled"; + }; + }; + timers2: timer@40000000 { #address-cells = <1>; #size-cells = <0>; @@ -1623,7 +1664,7 @@ * Break node order to solve dependency probe issue between * pinctrl and exti. */ - pinctrl: pin-controller@50002000 { + pinctrl: pinctrl@50002000 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32mp157-pinctrl"; @@ -1754,7 +1795,7 @@ }; }; - pinctrl_z: pin-controller-z@54004000 { + pinctrl_z: pinctrl@54004000 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32mp157-z-pinctrl"; diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1a.dts b/arch/arm/boot/dts/stm32mp151a-prtt1a.dts new file mode 100644 index 000000000000..75874eafde11 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp151a-prtt1a.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151a-prtt1l.dtsi" + +/ { + model = "Protonic PRTT1A"; + compatible = "prt,prtt1a", "st,stm32mp151"; +}; + +ðernet0 { + phy-handle = <&phy0>; +}; + +&mdio0 { + /* TI DP83TD510E */ + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id2000.0181"; + reg = <0>; + interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; +}; + +&pwm5_pins_a { + pins { + pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */ + }; +}; + +&pwm5_sleep_pins_a { + pins { + pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */ + }; +}; + +&timers5 { + status = "okay"; + + pwm { + pinctrl-0 = <&pwm5_pins_a>; + pinctrl-1 = <&pwm5_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1c.dts b/arch/arm/boot/dts/stm32mp151a-prtt1c.dts new file mode 100644 index 000000000000..7ecf31263abc --- /dev/null +++ b/arch/arm/boot/dts/stm32mp151a-prtt1c.dts @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151a-prtt1l.dtsi" + +/ { + model = "Protonic PRTT1C"; + compatible = "prt,prtt1c", "st,stm32mp151"; + + clock_ksz9031: clock-ksz9031 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + clock_sja1105: clock-sja1105 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpioc 1 GPIO_ACTIVE_HIGH + &gpioa 2 GPIO_ACTIVE_HIGH>; + + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpiod 8 GPIO_ACTIVE_LOW>; + }; +}; + +ðernet0 { + fixed-link { + speed = <100>; + full-duplex; + }; +}; + +&gpioa { + gpio-line-names = + "", "", "", "PHY0_nRESET", "PHY0_nINT", "", "", "", + "", "", "", "", "", "", "", "SPI1_nSS"; +}; + +&gpiod { + gpio-line-names = + "", "", "", "", "", "", "", "", + "WFM_RESET", "", "", "", "", "", "", ""; +}; + +&gpioe { + gpio-line-names = + "SDMMC2_nRESET", "", "", "", "", "", "SPI1_nRESET", "", + "", "", "", "", "WFM_nIRQ", "", "", ""; +}; + +&gpiog { + gpio-line-names = + "", "", "", "", "", "", "", "PHY3_nINT", + "PHY1_nINT", "PHY3_nRESET", "PHY2_nINT", "PHY2_nRESET", + "PHY1_nRESET", "SPE1_PWR", "SPE0_PWR", ""; +}; + +&mdio0 { + /* All this DP83TD510E PHYs can't be probed before switch@0 is + * probed so we need to use compatible with PHYid + */ + /* TI DP83TD510E */ + t1l0_phy: ethernet-phy@6 { + compatible = "ethernet-phy-id2000.0181"; + reg = <6>; + interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TD510E */ + t1l1_phy: ethernet-phy@7 { + compatible = "ethernet-phy-id2000.0181"; + reg = <7>; + interrupts-extended = <&gpiog 8 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpiog 12 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TD510E */ + t1l2_phy: ethernet-phy@10 { + compatible = "ethernet-phy-id2000.0181"; + reg = <10>; + interrupts-extended = <&gpiog 10 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpiog 11 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* Micrel KSZ9031 */ + rj45_phy: ethernet-phy@2 { + reg = <2>; + interrupts-extended = <&gpiog 7 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <1000>; + + clocks = <&clock_ksz9031>; + }; +}; + +&qspi { + status = "disabled"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; + non-removable; + no-sd; + no-sdio; + no-1-8-v; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_3v3>; + status = "okay"; +}; + +&sdmmc2_b4_od_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ + }; +}; + +&sdmmc2_b4_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ + <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + }; +}; + +&sdmmc2_b4_sleep_pins_a { + pins { + pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */ + <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */ + <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */ + }; +}; + +&sdmmc2_d47_pins_a { + pins { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ + }; +}; + +&sdmmc2_d47_sleep_pins_a { + pins { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */ + }; +}; + +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_b>; + pinctrl-1 = <&sdmmc3_b4_od_pins_b>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>; + non-removable; + no-1-8-v; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + mmc@1 { + compatible = "prt,prtt1c-wfm200", "silabs,wf200"; + reg = <1>; + }; +}; + +&sdmmc3_b4_od_pins_b { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */ + }; +}; + +&sdmmc3_b4_pins_b { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */ + <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */ + }; +}; + +&sdmmc3_b4_sleep_pins_b { + pins { + pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */ + <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */ + <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */ + }; +}; + +&spi1 { + pinctrl-0 = <&spi1_pins_b>; + pinctrl-names = "default"; + cs-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + switch@0 { + compatible = "nxp,sja1105q"; + reg = <0>; + spi-max-frequency = <4000000>; + spi-rx-delay-us = <1>; + spi-tx-delay-us = <1>; + spi-cpha; + + reset-gpios = <&gpioe 6 GPIO_ACTIVE_LOW>; + + clocks = <&clock_sja1105>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "t1l0"; + phy-mode = "rmii"; + phy-handle = <&t1l0_phy>; + }; + + port@1 { + reg = <1>; + label = "t1l1"; + phy-mode = "rmii"; + phy-handle = <&t1l1_phy>; + }; + + port@2 { + reg = <2>; + label = "t1l2"; + phy-mode = "rmii"; + phy-handle = <&t1l2_phy>; + }; + + port@3 { + reg = <3>; + label = "rj45"; + phy-handle = <&rj45_phy>; + phy-mode = "rgmii-id"; + }; + + port@4 { + reg = <4>; + label = "cpu"; + ethernet = <ðernet0>; + phy-mode = "rmii"; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi new file mode 100644 index 000000000000..d865ab5d866b --- /dev/null +++ b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi @@ -0,0 +1,229 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxad-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + aliases { + ethernet0 = ðernet0; + mdio-gpio0 = &mdio0; + serial0 = &uart4; + }; + + led-controller-0 { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + + /* DP83TD510E PHYs have max MDC rate of 1.75MHz. Since we can't reduce + * stmmac MDC clock without reducing system bus rate, we need to use + * gpio based MDIO bus. + */ + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpioc 1 GPIO_ACTIVE_HIGH + &gpioa 2 GPIO_ACTIVE_HIGH>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&dts { + status = "okay"; +}; + +ðernet0 { + pinctrl-0 = <ðernet0_rmii_pins_a>; + pinctrl-1 = <ðernet0_rmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + status = "okay"; +}; + +ðernet0_rmii_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */ + }; + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK input */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ + }; +}; + +ðernet0_rmii_sleep_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ + }; +}; + +&iwdg2 { + status = "okay"; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <104000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&qspi_bk1_pins_a { + pins1 { + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; +}; + +&rng1 { + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_3v3>; + status = "okay"; +}; + +&sdmmc1_b4_od_pins_a { + pins1 { + bias-pull-up; + }; + pins2 { + bias-pull-up; + }; +}; + +&sdmmc1_b4_pins_a { + pins1 { + bias-pull-up; + }; + pins2 { + bias-pull-up; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart4_idle_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-pull-up; + }; +}; + +&uart4_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-pull-up; + }; +}; + +&uart4_sleep_pins_a { + pins { + pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */ + <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */ + }; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "host"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <®_3v3>; +}; + +&usbphyc_port1 { + phy-supply = <®_3v3>; +}; diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1s.dts b/arch/arm/boot/dts/stm32mp151a-prtt1s.dts new file mode 100644 index 000000000000..ad25929e64e6 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp151a-prtt1s.dts @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151a-prtt1l.dtsi" + +/ { + model = "Protonic PRTT1S"; + compatible = "prt,prtt1s", "st,stm32mp151"; +}; + +ðernet0 { + phy-handle = <&phy0>; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + clock-frequency = <100000>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + humidity-sensor@40 { + compatible = "ti,hdc1080"; + reg = <0x40>; + }; + + co2-sensor@62 { + compatible = "sensirion,scd41"; + reg = <0x62>; + }; +}; + +&i2c1_pins_a { + pins { + pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */ + }; +}; + +&i2c1_sleep_pins_a { + pins { + pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */ + }; +}; + +&mdio0 { + /* TI DP83TD510E */ + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id2000.0181"; + reg = <0>; + interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts b/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts new file mode 100644 index 000000000000..e3d3f3f30c7d --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157a-dk1.dts" + +/ { + model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board"; + compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157a-dk1", "st,stm32mp157"; + + reserved-memory { + optee@de000000 { + reg = <0xde000000 0x2000000>; + no-map; + }; + }; +}; + +&cpu0 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cpu1 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&gpioz { + clocks = <&scmi_clk CK_SCMI_GPIOZ>; +}; + +&hash1 { + clocks = <&scmi_clk CK_SCMI_HASH1>; + resets = <&scmi_reset RST_SCMI_HASH1>; +}; + +&i2c4 { + clocks = <&scmi_clk CK_SCMI_I2C4>; + resets = <&scmi_reset RST_SCMI_I2C4>; +}; + +&iwdg2 { + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; +}; + +&mdma1 { + resets = <&scmi_reset RST_SCMI_MDMA>; +}; + +&mlahb { + resets = <&scmi_reset RST_SCMI_MCU>; +}; + +&optee { + status = "okay"; +}; + +&rcc { + compatible = "st,stm32mp1-rcc-secure", "syscon"; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; +}; + +&rng1 { + clocks = <&scmi_clk CK_SCMI_RNG1>; + resets = <&scmi_reset RST_SCMI_RNG1>; +}; + +&rtc { + clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; +}; + +&scmi { + status = "okay"; +}; + +&scmi_shm { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts b/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts new file mode 100644 index 000000000000..45dcd299aa9e --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157c-dk2.dts" + +/ { + model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board"; + compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157"; + + reserved-memory { + optee@de000000 { + reg = <0xde000000 0x2000000>; + no-map; + }; + }; +}; + +&cpu0 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cpu1 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cryp1 { + clocks = <&scmi_clk CK_SCMI_CRYP1>; + resets = <&scmi_reset RST_SCMI_CRYP1>; +}; + +&dsi { + clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>; +}; + +&gpioz { + clocks = <&scmi_clk CK_SCMI_GPIOZ>; +}; + +&hash1 { + clocks = <&scmi_clk CK_SCMI_HASH1>; + resets = <&scmi_reset RST_SCMI_HASH1>; +}; + +&i2c4 { + clocks = <&scmi_clk CK_SCMI_I2C4>; + resets = <&scmi_reset RST_SCMI_I2C4>; +}; + +&iwdg2 { + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; +}; + +&mdma1 { + resets = <&scmi_reset RST_SCMI_MDMA>; +}; + +&mlahb { + resets = <&scmi_reset RST_SCMI_MCU>; +}; + +&optee { + status = "okay"; +}; + +&rcc { + compatible = "st,stm32mp1-rcc-secure", "syscon"; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; +}; + +&rng1 { + clocks = <&scmi_clk CK_SCMI_RNG1>; + resets = <&scmi_reset RST_SCMI_RNG1>; +}; + +&rtc { + clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; +}; + +&scmi { + status = "okay"; +}; + +&scmi_shm { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts b/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts new file mode 100644 index 000000000000..458e0ca3cded --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157c-ed1.dts" + +/ { + model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter"; + compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157"; + + reserved-memory { + optee@fe000000 { + reg = <0xfe000000 0x2000000>; + no-map; + }; + }; +}; + +&cpu0 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cpu1 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cryp1 { + clocks = <&scmi_clk CK_SCMI_CRYP1>; + resets = <&scmi_reset RST_SCMI_CRYP1>; +}; + +&gpioz { + clocks = <&scmi_clk CK_SCMI_GPIOZ>; +}; + +&hash1 { + clocks = <&scmi_clk CK_SCMI_HASH1>; + resets = <&scmi_reset RST_SCMI_HASH1>; +}; + +&i2c4 { + clocks = <&scmi_clk CK_SCMI_I2C4>; + resets = <&scmi_reset RST_SCMI_I2C4>; +}; + +&iwdg2 { + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; +}; + +&mdma1 { + resets = <&scmi_reset RST_SCMI_MDMA>; +}; + +&mlahb { + resets = <&scmi_reset RST_SCMI_MCU>; +}; + +&optee { + status = "okay"; +}; + +&rcc { + compatible = "st,stm32mp1-rcc-secure", "syscon"; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; +}; + +&rng1 { + clocks = <&scmi_clk CK_SCMI_RNG1>; + resets = <&scmi_reset RST_SCMI_RNG1>; +}; + +&rtc { + clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; +}; + +&scmi { + status = "okay"; +}; + +&scmi_shm { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi index 33ae5e0590df..ac53ee3c496b 100644 --- a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi +++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi @@ -398,7 +398,7 @@ #size-cells = <0>; status = "okay"; - flash0: is25lp016d@0 { + flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <133000000>; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts b/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts new file mode 100644 index 000000000000..df9c113edb4b --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157c-ev1.dts" + +/ { + model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother"; + compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", + "st,stm32mp157"; + + reserved-memory { + optee@fe000000 { + reg = <0xfe000000 0x2000000>; + no-map; + }; + }; +}; + +&cpu0 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cpu1 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cryp1 { + clocks = <&scmi_clk CK_SCMI_CRYP1>; + resets = <&scmi_reset RST_SCMI_CRYP1>; +}; + +&dsi { + clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>; +}; + +&gpioz { + clocks = <&scmi_clk CK_SCMI_GPIOZ>; +}; + +&hash1 { + clocks = <&scmi_clk CK_SCMI_HASH1>; + resets = <&scmi_reset RST_SCMI_HASH1>; +}; + +&i2c4 { + clocks = <&scmi_clk CK_SCMI_I2C4>; + resets = <&scmi_reset RST_SCMI_I2C4>; +}; + +&iwdg2 { + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; +}; + +&m_can1 { + clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>; +}; + +&mdma1 { + resets = <&scmi_reset RST_SCMI_MDMA>; +}; + +&mlahb { + resets = <&scmi_reset RST_SCMI_MCU>; +}; + +&optee { + status = "okay"; +}; + +&rcc { + compatible = "st,stm32mp1-rcc-secure", "syscon"; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; +}; + +&rng1 { + clocks = <&scmi_clk CK_SCMI_RNG1>; + resets = <&scmi_reset RST_SCMI_RNG1>; +}; + +&rtc { + clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; +}; + +&scmi { + status = "okay"; +}; + +&scmi_shm { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index e222d2d2cb44..d142dd30e16b 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -262,7 +262,7 @@ #size-cells = <0>; status = "okay"; - flash0: mx66l51235l@0 { + flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-rx-bus-width = <4>; @@ -271,7 +271,7 @@ #size-cells = <1>; }; - flash1: mx66l51235l@1 { + flash1: flash@1 { compatible = "jedec,spi-nor"; reg = <1>; spi-rx-bus-width = <4>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index 83e2c87713f8..238a611192e7 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -118,13 +118,12 @@ ðernet0 { status = "okay"; - pinctrl-0 = <ðernet0_rmii_pins_a>; - pinctrl-1 = <ðernet0_rmii_sleep_pins_a>; + pinctrl-0 = <ðernet0_rmii_pins_c &mco2_pins_a>; + pinctrl-1 = <ðernet0_rmii_sleep_pins_c &mco2_sleep_pins_a>; pinctrl-names = "default", "sleep"; phy-mode = "rmii"; max-speed = <100>; phy-handle = <&phy0>; - st,eth-ref-clk-sel; mdio0 { #address-cells = <1>; @@ -136,7 +135,7 @@ /* LAN8710Ai */ compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22"; - clocks = <&rcc ETHCK_K>; + clocks = <&rcc CK_MCO2>; reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; reset-assert-us = <500>; reset-deassert-us = <500>; @@ -446,6 +445,21 @@ }; }; +&rcc { + /* Connect MCO2 output to ETH_RX_CLK input via pad-pad connection */ + clocks = <&rcc CK_MCO2>; + clock-names = "ETH_RX_CLK/ETH_REF_CLK"; + + /* + * Set PLL4P output to 100 MHz to supply SDMMC with faster clock, + * set MCO2 output to 50 MHz to supply ETHRX clock with PLL4P/2, + * so that MCO2 behaves as a divider for the ETHRX clock here. + */ + assigned-clocks = <&rcc CK_MCO2>, <&rcc PLL4_P>; + assigned-clock-parents = <&rcc PLL4_P>; + assigned-clock-rates = <50000000>, <100000000>; +}; + &rng1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi index 61e17f44ce81..76c54b006d87 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi @@ -141,6 +141,7 @@ compatible = "snps,dwmac-mdio"; reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>; reset-delay-us = <1000>; + reset-post-delay-us = <1000>; phy0: ethernet-phy@7 { reg = <7>; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi index fc45d5aaa67f..a9f749f49beb 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi @@ -75,7 +75,6 @@ r_gpio_keys { compatible = "gpio-keys"; - input-name = "k1"; k1 { label = "k1"; diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts index a1154e6c7cb5..04e59b8381cb 100644 --- a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts +++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts @@ -11,12 +11,43 @@ compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s"; aliases { + mmc0 = &mmc0; serial0 = &uart0; + spi0 = &spi0; }; chosen { stdout-path = "serial0:115200n8"; }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&mmc0 { + broken-cd; + bus-width = <4>; + disable-wp; + status = "okay"; + vmmc-supply = <®_vcc3v3>; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pc_pins>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + }; }; &uart0 { diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi index 6100d3b75f61..0edc1724407b 100644 --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi @@ -4,6 +4,9 @@ * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com> */ +#include <dt-bindings/clock/suniv-ccu-f1c100s.h> +#include <dt-bindings/reset/suniv-ccu-f1c100s.h> + / { #address-cells = <1>; #size-cells = <1>; @@ -26,9 +29,13 @@ }; cpus { - cpu { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0x0>; }; }; @@ -62,6 +69,70 @@ }; }; + spi0: spi@1c05000 { + compatible = "allwinner,suniv-f1c100s-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c05000 0x1000>; + interrupts = <10>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@1c06000 { + compatible = "allwinner,suniv-f1c100s-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c06000 0x1000>; + interrupts = <11>; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc0: mmc@1c0f000 { + compatible = "allwinner,suniv-f1c100s-mmc", + "allwinner,sun7i-a20-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ccu CLK_BUS_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; + clock-names = "ahb", "mmc", "output", "sample"; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + interrupts = <23>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@1c10000 { + compatible = "allwinner,suniv-f1c100s-mmc", + "allwinner,sun7i-a20-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ccu CLK_BUS_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; + clock-names = "ahb", "mmc", "output", "sample"; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + interrupts = <24>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + ccu: clock@1c20000 { compatible = "allwinner,suniv-f1c100s-ccu"; reg = <0x01c20000 0x400>; @@ -82,13 +153,24 @@ compatible = "allwinner,suniv-f1c100s-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <38>, <39>, <40>; - clocks = <&ccu 37>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; + mmc0_pins: mmc0-pins { + pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + }; + + spi0_pc_pins: spi0-pc-pins { + pins = "PC0", "PC1", "PC2", "PC3"; + function = "spi0"; + }; + uart0_pe_pins: uart0-pe-pins { pins = "PE0", "PE1"; function = "uart0"; @@ -98,14 +180,16 @@ timer@1c20c00 { compatible = "allwinner,suniv-f1c100s-timer"; reg = <0x01c20c00 0x90>; - interrupts = <13>; + interrupts = <13>, <14>, <15>; clocks = <&osc24M>; }; wdt: watchdog@1c20ca0 { compatible = "allwinner,suniv-f1c100s-wdt", - "allwinner,sun4i-a10-wdt"; + "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; + interrupts = <16>; + clocks = <&osc32k>; }; uart0: serial@1c25000 { @@ -114,8 +198,8 @@ interrupts = <1>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 38>; - resets = <&ccu 24>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; @@ -125,8 +209,8 @@ interrupts = <2>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 39>; - resets = <&ccu 25>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; @@ -136,8 +220,8 @@ interrupts = <3>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 40>; - resets = <&ccu 26>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index 8a0cfbfd0c45..b6cb9cdf8197 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -60,7 +60,7 @@ spi0: spi@fffa4000 { cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>; status = "okay"; - mtd_dataflash@0 { + flash@0 { compatible = "atmel,at45", "atmel,dataflash"; reg = <0>; spi-max-frequency = <15000000>; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 47c2a4b14c06..c193264a86ff 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -343,8 +343,6 @@ <0 40 4>, <0 41 4>, <0 42 4>, <0 43 4>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <4>; clocks = <&clkc 27>; clock-names = "apb_pclk"; }; diff --git a/arch/arm/boot/install.sh b/arch/arm/boot/install.sh index 2a45092a40e3..9ec11fac7d8d 100644..100755 --- a/arch/arm/boot/install.sh +++ b/arch/arm/boot/install.sh @@ -1,7 +1,5 @@ #!/bin/sh # -# arch/arm/boot/install.sh -# # This file is subject to the terms and conditions of the GNU General Public # License. See the file "COPYING" in the main directory of this archive # for more details. @@ -18,25 +16,6 @@ # $2 - kernel image file # $3 - kernel map file # $4 - default install path (blank if root directory) -# - -verify () { - if [ ! -f "$1" ]; then - echo "" 1>&2 - echo " *** Missing file: $1" 1>&2 - echo ' *** You need to run "make" before "make install".' 1>&2 - echo "" 1>&2 - exit 1 - fi -} - -# Make sure the files actually exist -verify "$2" -verify "$3" - -# User may have a custom install script -if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi -if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi if [ "$(basename $2)" = "zImage" ]; then # Compressed install diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 24d21ba63030..da30a4d4f35c 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -23,7 +23,6 @@ #include <linux/spinlock.h> #include <linux/io.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/irq.h> diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 5367f03beb46..2343e2b6214d 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -26,13 +26,16 @@ #include <linux/clk.h> #include <linux/io.h> -#include <mach/hardware.h> #include <asm/mach/irq.h> #include <asm/mach-types.h> #include <linux/sizes.h> #include <asm/hardware/sa1111.h> +#ifdef CONFIG_ARCH_SA1100 +#include <mach/hardware.h> +#endif + /* SA1111 IRQs */ #define IRQ_GPAIN0 (0) #define IRQ_GPAIN1 (1) diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig index 4e49d6cb2f62..9252ce0e722b 100644 --- a/arch/arm/configs/am200epdkit_defconfig +++ b/arch/arm/configs/am200epdkit_defconfig @@ -10,6 +10,7 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_GUMSTIX=y CONFIG_PCCARD=y diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 549d01be0b47..db15a8be6389 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -4,6 +4,7 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS_ALL=y @@ -50,13 +51,13 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_TESTS=m CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_FASTMAP=y +CONFIG_MTD_UBI_BLOCK=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 @@ -205,6 +206,7 @@ CONFIG_PWM_ATMEL=y CONFIG_PWM_ATMEL_HLCDC_PWM=y CONFIG_PWM_ATMEL_TCB=y CONFIG_EXT4_FS=y +CONFIG_AUTOFS_FS=m CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig index 45769d0ddd4e..bb0fcd82d2a7 100644 --- a/arch/arm/configs/cm_x300_defconfig +++ b/arch/arm/configs/cm_x300_defconfig @@ -10,6 +10,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_GPIO_PCA953X=y CONFIG_MACH_CM_X300=y diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig index 52bad9a544a0..b29898fd6a12 100644 --- a/arch/arm/configs/colibri_pxa270_defconfig +++ b/arch/arm/configs/colibri_pxa270_defconfig @@ -16,6 +16,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_COLIBRI=y CONFIG_PREEMPT=y diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig index 26e5a67f8e2d..f9d110294644 100644 --- a/arch/arm/configs/colibri_pxa300_defconfig +++ b/arch/arm/configs/colibri_pxa300_defconfig @@ -1,6 +1,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_COLIBRI300=y CONFIG_AEABI=y diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 15b749f6996d..96c677c98bc7 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -9,6 +9,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_PXA_SHARPSL=y CONFIG_MACH_POODLE=y diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index 33074fdab2ea..f8fb4758f80d 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -8,6 +8,8 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y +# CONFIG_ARCH_MULTI_V6 is not set +CONFIG_ARCH_MULTI_V7=y CONFIG_ARCH_DOVE=y CONFIG_MACH_DOVE_DB=y CONFIG_MACH_CM_A510=y diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 88d5ecc2121e..fef802b7af8c 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -11,6 +11,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y +CONFIG_ARCH_MULTI_V4T=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_EP93XX=y CONFIG_MACH_ADSSPHERE=y CONFIG_MACH_EDB9301=y diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig index 046f4dc2e18e..2146adc1825e 100644 --- a/arch/arm/configs/eseries_pxa_defconfig +++ b/arch/arm/configs/eseries_pxa_defconfig @@ -9,6 +9,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_PXA_ESERIES=y # CONFIG_ARM_THUMB is not set diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index 0788a892e160..5d000c8be44e 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -14,6 +14,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_PXA_EZX=y CONFIG_NO_HZ=y diff --git a/arch/arm/configs/gemini_defconfig b/arch/arm/configs/gemini_defconfig index a7acfee11ffc..a80bc8a43091 100644 --- a/arch/arm/configs/gemini_defconfig +++ b/arch/arm/configs/gemini_defconfig @@ -49,11 +49,13 @@ CONFIG_ATA=y CONFIG_PATA_FTIDE010=y CONFIG_NETDEVICES=y CONFIG_TUN=y +CONFIG_NET_DSA_REALTEK=y CONFIG_NET_DSA_REALTEK_SMI=y +CONFIG_NET_DSA_REALTEK_RTL8366RB=y CONFIG_GEMINI_ETHERNET=y +CONFIG_MARVELL_PHY=y CONFIG_MDIO_BITBANG=y CONFIG_MDIO_GPIO=y -CONFIG_MARVELL_PHY=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set @@ -66,6 +68,7 @@ CONFIG_SERIAL_OF_PLATFORM=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_GPIO=y +CONFIG_SENSORS_DRIVETEMP=y CONFIG_SENSORS_GPIO_FAN=y CONFIG_SENSORS_LM75=y CONFIG_THERMAL=y diff --git a/arch/arm/configs/h5000_defconfig b/arch/arm/configs/h5000_defconfig index f5a338fefda8..a67d6020aee5 100644 --- a/arch/arm/configs/h5000_defconfig +++ b/arch/arm/configs/h5000_defconfig @@ -10,6 +10,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_H5000=y CONFIG_AEABI=y diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig deleted file mode 100644 index 015b7ef237de..000000000000 --- a/arch/arm/configs/imote2_defconfig +++ /dev/null @@ -1,365 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_RD_BZIP2=y -CONFIG_RD_LZMA=y -CONFIG_EXPERT=y -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_PXA=y -CONFIG_MACH_INTELMOTE2=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M" -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_APM_EMULATION=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_SYN_COOKIES=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_SCTP=y -CONFIG_NF_CT_PROTO_UDPLITE=y -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_LED=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_TIME=m -CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -CONFIG_BRIDGE=m -# CONFIG_BRIDGE_IGMP_SNOOPING is not set -CONFIG_IEEE802154=y -# CONFIG_WIRELESS is not set -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_FW_LOADER=m -CONFIG_CONNECTOR=m -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_AFS_PARTS=y -CONFIG_MTD_AR7_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -# CONFIG_MTD_CFI_I2 is not set -CONFIG_MTD_OTP=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PXA2XX=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_WLAN is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -CONFIG_KEYBOARD_PXA27x=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=8 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_PXA=y -CONFIG_SPI=y -CONFIG_SPI_PXA2XX=y -CONFIG_GPIO_SYSFS=y -CONFIG_POWER_SUPPLY=y -# CONFIG_HWMON is not set -CONFIG_PMIC_DA903X=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_DEBUG=y -CONFIG_REGULATOR_DA903X=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_VIDEO_DEV=y -CONFIG_MEDIA_TUNER_CUSTOMISE=y -# CONFIG_MEDIA_TUNER_SIMPLE is not set -# CONFIG_MEDIA_TUNER_TDA8290 is not set -# CONFIG_MEDIA_TUNER_TDA827X is not set -# CONFIG_MEDIA_TUNER_TDA18271 is not set -# CONFIG_MEDIA_TUNER_TDA9887 is not set -# CONFIG_MEDIA_TUNER_TEA5761 is not set -# CONFIG_MEDIA_TUNER_TEA5767 is not set -# CONFIG_MEDIA_TUNER_MT20XX is not set -# CONFIG_MEDIA_TUNER_MT2060 is not set -# CONFIG_MEDIA_TUNER_MT2266 is not set -# CONFIG_MEDIA_TUNER_MT2131 is not set -# CONFIG_MEDIA_TUNER_QT1010 is not set -# CONFIG_MEDIA_TUNER_XC2028 is not set -# CONFIG_MEDIA_TUNER_XC5000 is not set -# CONFIG_MEDIA_TUNER_MXL5005S is not set -# CONFIG_MEDIA_TUNER_MXL5007T is not set -# CONFIG_MEDIA_TUNER_MC44S803 is not set -# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set -CONFIG_VIDEO_PXA27x=y -# CONFIG_V4L_USB_DRIVERS is not set -# CONFIG_RADIO_ADAPTERS is not set -CONFIG_FB=y -CONFIG_FB_PXA=y -CONFIG_FB_PXA_OVERLAY=y -CONFIG_FB_PXA_PARAMETERS=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_MINI_4x6=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_ARM is not set -# CONFIG_SND_SPI is not set -# CONFIG_SND_USB is not set -CONFIG_SND_SOC=y -CONFIG_SND_PXA2XX_SOC=y -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_USB_PXA27X=y -CONFIG_USB_ETH=m -# CONFIG_USB_ETH_RNDIS is not set -CONFIG_MMC=y -CONFIG_SDIO_UART=m -CONFIG_MMC_PXA=y -CONFIG_MMC_SPI=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_LP3944=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_BACKLIGHT=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_PXA=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=m -CONFIG_AUTOFS4_FS=y -CONFIG_FUSE_FS=m -CONFIG_CUSE=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_WBUF_VERIFY=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RUBIN=y -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -CONFIG_ROMFS_FS=m -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFSD=m -CONFIG_NFSD_V3_ACL=y -CONFIG_SMB_FS=m -CONFIG_CIFS=m -CONFIG_CIFS_STATS=y -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_PROVE_LOCKING=y -# CONFIG_FTRACE is not set -CONFIG_DEBUG_USER=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_VMAC=m -CONFIG_CRYPTO_GHASH=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SEED=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC16=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index f7498df08dfe..88a3602c4e58 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -402,6 +402,7 @@ CONFIG_IIO=y CONFIG_MMA8452=y CONFIG_IMX7D_ADC=y CONFIG_RN5T618_ADC=y +CONFIG_STMPE_ADC=y CONFIG_VF610_ADC=y CONFIG_SENSORS_ISL29018=y CONFIG_MAG3110=y diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig index de2cc6759cae..ead14c3f23d8 100644 --- a/arch/arm/configs/iop32x_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -7,6 +7,7 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_IOP32X=y CONFIG_MACH_GLANTANK=y CONFIG_ARCH_IQ80321=y diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index 9a7667383df9..960978a23d16 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -1,36 +1,22 @@ +CONFIG_KERNEL_XZ=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_COMPRESSION_XZ=y CONFIG_EXPERT=y -CONFIG_MODULES=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_IXP4XX=y -CONFIG_MACH_NSLU2=y -CONFIG_MACH_AVILA=y -CONFIG_MACH_LOFT=y -CONFIG_ARCH_ADI_COYOTE=y -CONFIG_MACH_GATEWAY7001=y -CONFIG_MACH_WG302V2=y -CONFIG_ARCH_IXDP425=y -CONFIG_MACH_IXDPG425=y -CONFIG_MACH_IXDP465=y -CONFIG_MACH_KIXRP435=y -CONFIG_ARCH_PRPMC1100=y -CONFIG_MACH_NAS100D=y -CONFIG_MACH_DSMG600=y -CONFIG_MACH_FSG=y -CONFIG_MACH_GTWX5715=y -CONFIG_IXP4XX_QMGR=y -CONFIG_IXP4XX_NPE=y # CONFIG_ARM_THUMB is not set CONFIG_CPU_BIG_ENDIAN=y CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp root=/dev/nfs" -CONFIG_FPE_NWFPE=y +CONFIG_CMDLINE="console=ttyS0,115200" +CONFIG_STRICT_KERNEL_RWX=y +CONFIG_STRICT_MODULE_RWX=y +CONFIG_MODULES=y +CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -43,8 +29,6 @@ CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y @@ -65,7 +49,6 @@ CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -76,14 +59,12 @@ CONFIG_ATM_MPOA=m CONFIG_ATM_BR2684=m CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m -CONFIG_IPX=m CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y CONFIG_X25=m CONFIG_LAPB=m -CONFIG_WAN_ROUTER=m CONFIG_NET_SCHED=y CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m @@ -104,91 +85,92 @@ CONFIG_NET_CLS_RSVP6=m CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=y CONFIG_NET_PKTGEN=m +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_IXP4XX=y +CONFIG_MTD_PHYSMAP_IXP4XX=y CONFIG_MTD_RAW_NAND=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_EEPROM_AT24=y CONFIG_EEPROM_LEGACY=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y +# CONFIG_BLK_DEV_BSG is not set # CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=y -CONFIG_SATA_VIA=y -CONFIG_PATA_ARTOP=y -CONFIG_PATA_CMD64X=y -CONFIG_PATA_HPT366=y -CONFIG_PATA_HPT37X=y -CONFIG_PATA_HPT3X2N=y -CONFIG_PATA_PDC2027X=y CONFIG_PATA_IXP4XX_CF=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y +CONFIG_ATM_TCP=m CONFIG_IXP4XX_ETH=y -CONFIG_NET_PCI=y CONFIG_WAN=y -CONFIG_HDLC=m +CONFIG_HDLC=y CONFIG_HDLC_RAW=m CONFIG_HDLC_CISCO=m CONFIG_HDLC_FR=m CONFIG_HDLC_PPP=m -CONFIG_HDLC_X25=m -CONFIG_WAN_ROUTER_DRIVERS=m -CONFIG_ATM_TCP=m -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_IXP4XX_HSS=m +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_MISC=y -CONFIG_INPUT_IXP4XX_BEEPER=y # CONFIG_SERIO is not set # CONFIG_VT is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_I2C=y +CONFIG_HW_RANDOM=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_GPIO=y +CONFIG_GPIO_GW_PLD=y +CONFIG_GPIO_PCA953X=y +CONFIG_SENSORS_AD7418=y CONFIG_SENSORS_W83781D=y CONFIG_WATCHDOG=y CONFIG_IXP4XX_WATCHDOG=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y -CONFIG_USB_UHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y -CONFIG_LEDS_FSG=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_DISK=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1672=y CONFIG_RTC_DRV_ISL1208=y CONFIG_RTC_DRV_X1205=y CONFIG_RTC_DRV_PCF8563=y +CONFIG_IXP4XX_QMGR=y +CONFIG_IXP4XX_NPE=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_OVERLAY_FS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y CONFIG_JFFS2_FS=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_XZ=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y +CONFIG_CRYPTO_DEV_IXP4XX=y CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_FS=y CONFIG_DEBUG_LL=y CONFIG_DEBUG_LL_UART_8250=y diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig index be882ea0eee4..688c9849eec8 100644 --- a/arch/arm/configs/lpc18xx_defconfig +++ b/arch/arm/configs/lpc18xx_defconfig @@ -30,7 +30,6 @@ CONFIG_ARM_APPENDED_DTB=y # CONFIG_BLK_DEV_BSG is not set CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -CONFIG_BINFMT_SHARED_FLAT=y # CONFIG_COREDUMP is not set CONFIG_NET=y CONFIG_PACKET=y diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig index 3a4d0e64cd6e..5c0a671ed294 100644 --- a/arch/arm/configs/lpd270_defconfig +++ b/arch/arm/configs/lpd270_defconfig @@ -2,6 +2,7 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SLAB=y CONFIG_MODULES=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_LOGICPD_PXA270=y # CONFIG_ARM_THUMB is not set diff --git a/arch/arm/configs/lubbock_defconfig b/arch/arm/configs/lubbock_defconfig index 4ce2da2e76fa..cf49dc1629a7 100644 --- a/arch/arm/configs/lubbock_defconfig +++ b/arch/arm/configs/lubbock_defconfig @@ -1,6 +1,7 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_MODULES=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_LUBBOCK=y # CONFIG_ARM_THUMB is not set diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index abde1fb23b20..13da808ffa13 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -9,6 +9,7 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_H4700=y CONFIG_MACH_MAGICIAN=y diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig index 26499b697f9f..03b4c61bdadd 100644 --- a/arch/arm/configs/mainstone_defconfig +++ b/arch/arm/configs/mainstone_defconfig @@ -1,6 +1,7 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_MODULES=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_MAINSTONE=y # CONFIG_ARM_THUMB is not set diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 898490aaa39e..3ef48e79b410 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -4,9 +4,10 @@ CONFIG_POSIX_MQUEUE=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y # CONFIG_COMPAT_BRK is not set +CONFIG_ARCH_MULTI_V4T=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_S3C24XX=y CONFIG_S3C_ADC=y -CONFIG_S3C24XX_PWM=y # CONFIG_CPU_S3C2410 is not set CONFIG_CPU_S3C2440=y CONFIG_MACH_MINI2440=y @@ -228,6 +229,8 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_DRV_S3C=y CONFIG_DMADEVICES=y CONFIG_S3C24XX_DMAC=y +CONFIG_PWM=y +CONFIG_PWM_SAMSUNG=y CONFIG_EXT2_FS=m CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y diff --git a/arch/arm/configs/mps2_defconfig b/arch/arm/configs/mps2_defconfig index 89f4a6ff30bd..c1e98e33a348 100644 --- a/arch/arm/configs/mps2_defconfig +++ b/arch/arm/configs/mps2_defconfig @@ -23,7 +23,6 @@ CONFIG_PREEMPT_VOLUNTARY=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_BINFMT_FLAT=y -CONFIG_BINFMT_SHARED_FLAT=y # CONFIG_COREDUMP is not set # CONFIG_SUSPEND is not set CONFIG_NET=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 70241ad2b550..f8d301150732 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -211,7 +211,8 @@ CONFIG_SND_ATMEL_SOC_WM8904=m CONFIG_SND_AT91_SOC_SAM9X5_WM8731=m CONFIG_SND_KIRKWOOD_SOC=y CONFIG_SND_SOC_ALC5623=y -CONFIG_SND_SOC_WM8731=y +CONFIG_SND_SOC_WM8731_I2C=y +CONFIG_SND_SOC_WM8731_SPI=y CONFIG_SND_SIMPLE_CARD=y CONFIG_HID_DRAGONRISE=y CONFIG_HID_GYRATION=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 6e0c8c19b35c..ce9826bce29b 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -17,6 +17,7 @@ CONFIG_SOC_SAMA5D2=y CONFIG_SOC_SAMA5D3=y CONFIG_SOC_SAMA5D4=y CONFIG_SOC_SAMA7G5=y +CONFIG_SOC_LAN966=y CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM_CYGNUS=y CONFIG_ARCH_BCM_HR2=y @@ -29,6 +30,7 @@ CONFIG_ARCH_BCM2835=y CONFIG_ARCH_BCM_53573=y CONFIG_ARCH_BCM_63XX=y CONFIG_ARCH_BRCMSTB=y +CONFIG_ARCH_BCMBCA=y CONFIG_ARCH_BERLIN=y CONFIG_MACH_BERLIN_BG2=y CONFIG_MACH_BERLIN_BG2CD=y @@ -42,6 +44,8 @@ CONFIG_ARCH_HI3xxx=y CONFIG_ARCH_HIP01=y CONFIG_ARCH_HIP04=y CONFIG_ARCH_HIX5HD2=y +CONFIG_ARCH_HPE=y +CONFIG_ARCH_HPE_GXP=y CONFIG_ARCH_MXC=y CONFIG_SOC_IMX50=y CONFIG_SOC_IMX51=y @@ -276,6 +280,7 @@ CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y CONFIG_PXA168_ETH=m CONFIG_KS8851=y +CONFIG_LAN966X_SWITCH=m CONFIG_R8169=y CONFIG_SH_ETH=y CONFIG_SMSC911X=y @@ -286,6 +291,7 @@ CONFIG_TI_CPSW=y CONFIG_TI_CPSW_SWITCHDEV=y CONFIG_TI_CPTS=y CONFIG_XILINX_EMACLITE=y +CONFIG_SFP=m CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y CONFIG_MARVELL_PHY=y @@ -293,6 +299,7 @@ CONFIG_AT803X_PHY=y CONFIG_ROCKCHIP_PHY=y CONFIG_DP83867_PHY=y CONFIG_USB_BRCMSTB=m +CONFIG_MDIO_MSCC_MIIM=m CONFIG_USB_PEGASUS=y CONFIG_USB_RTL8152=m CONFIG_USB_LAN78XX=m @@ -429,6 +436,7 @@ CONFIG_I2C_CROS_EC_TUNNEL=m CONFIG_I2C_SLAVE_EEPROM=y CONFIG_SPI=y CONFIG_SPI_ATMEL=m +CONFIG_SPI_ATMEL_QUADSPI=m CONFIG_SPI_BCM2835=y CONFIG_SPI_BCM2835AUX=y CONFIG_SPI_CADENCE=y @@ -458,6 +466,8 @@ CONFIG_SPMI=y CONFIG_PTP_1588_CLOCK=y CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_STMFX=y +CONFIG_PINCTRL_MICROCHIP_SGPIO=y +CONFIG_PINCTRL_OCELOT=y CONFIG_PINCTRL_PALMAS=y CONFIG_PINCTRL_OWL=y CONFIG_PINCTRL_S500=y @@ -516,6 +526,7 @@ CONFIG_CHARGER_TPS65090=y CONFIG_SENSORS_ARM_SCMI=y CONFIG_SENSORS_ASPEED=m CONFIG_SENSORS_IIO_HWMON=y +CONFIG_SENSORS_LAN966X=m CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM95245=y CONFIG_SENSORS_NTC_THERMISTOR=m @@ -562,6 +573,7 @@ CONFIG_BCM47XX_WDT=y CONFIG_BCM2835_WDT=y CONFIG_BCM_KONA_WDT=y CONFIG_BCM7038_WDT=m +CONFIG_GXP_WATCHDOG=y CONFIG_BCMA_HOST_SOC=y CONFIG_BCMA_DRIVER_GMAC_CMN=y CONFIG_BCMA_DRIVER_GPIO=y @@ -662,7 +674,10 @@ CONFIG_VIDEO_S5P_MIPI_CSIS=m CONFIG_VIDEO_EXYNOS_FIMC_LITE=m CONFIG_VIDEO_EXYNOS4_FIMC_IS=m CONFIG_VIDEO_RCAR_VIN=m +CONFIG_VIDEO_ATMEL_ISC=m +CONFIG_VIDEO_ATMEL_XISC=m CONFIG_VIDEO_ATMEL_ISI=m +CONFIG_VIDEO_MICROCHIP_CSI2DC=m CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m CONFIG_VIDEO_SAMSUNG_S5P_MFC=m @@ -673,6 +688,7 @@ CONFIG_VIDEO_STI_DELTA=m CONFIG_VIDEO_RENESAS_FDP1=m CONFIG_VIDEO_RENESAS_JPU=m CONFIG_VIDEO_RENESAS_VSP1=m +CONFIG_VIDEO_TEGRA_VDE=m CONFIG_V4L_TEST_DRIVERS=y CONFIG_VIDEO_VIVID=m CONFIG_VIDEO_ADV7180=m @@ -683,6 +699,7 @@ CONFIG_IMX_IPUV3_CORE=m CONFIG_DRM=y # CONFIG_DRM_I2C_CH7006 is not set # CONFIG_DRM_I2C_SIL164 is not set +CONFIG_DRM_I2C_NXP_TDA998X=m CONFIG_DRM_NOUVEAU=m CONFIG_DRM_EXYNOS=m CONFIG_DRM_EXYNOS_FIMD=y @@ -761,6 +778,8 @@ CONFIG_SND_ATMEL_SOC_WM8904=m CONFIG_SND_ATMEL_SOC_PDMIC=m CONFIG_SND_ATMEL_SOC_I2S=m CONFIG_SND_BCM2835_SOC_I2S=m +CONFIG_SND_IMX_SOC=m +CONFIG_SND_SOC_FSL_ASOC_CARD=m CONFIG_SND_SOC_FSL_SAI=m CONFIG_SND_PXA_SOC_SSP=m CONFIG_SND_MMP_SOC_SSPA=m @@ -797,6 +816,8 @@ CONFIG_SND_SOC_TEGRA_WM9712=m CONFIG_SND_SOC_TEGRA_TRIMSLICE=m CONFIG_SND_SOC_TEGRA_ALC5632=m CONFIG_SND_SOC_TEGRA_MAX98090=m +CONFIG_SND_SOC_DAVINCI_MCASP=m +CONFIG_SND_SOC_AC97=m CONFIG_SND_SOC_AK4642=m CONFIG_SND_SOC_CPCAP=m CONFIG_SND_SOC_CS42L51_I2C=m @@ -1010,6 +1031,7 @@ CONFIG_CROS_EC_SPI=m CONFIG_COMMON_CLK_MAX77686=y CONFIG_COMMON_CLK_RK808=m CONFIG_COMMON_CLK_SCMI=y +CONFIG_COMMON_CLK_LAN966X=y CONFIG_COMMON_CLK_S2MPS11=m CONFIG_CLK_RASPBERRYPI=y CONFIG_COMMON_CLK_QCOM=y @@ -1137,6 +1159,7 @@ CONFIG_PWM_SUN4I=y CONFIG_PWM_TEGRA=y CONFIG_PWM_VT8500=y CONFIG_KEYSTONE_IRQ=y +CONFIG_RESET_MCHP_SPARX5=y CONFIG_PHY_SUN4I_USB=y CONFIG_PHY_SUN9I_USB=y CONFIG_PHY_HIX5HD2_SATA=y @@ -1144,6 +1167,7 @@ CONFIG_PHY_BERLIN_SATA=y CONFIG_PHY_BERLIN_USB=y CONFIG_PHY_BRCM_USB=m CONFIG_PHY_MMP3_USB=m +CONFIG_PHY_LAN966X_SERDES=m CONFIG_PHY_CPCAP_USB=m CONFIG_PHY_QCOM_APQ8064_SATA=m CONFIG_PHY_QCOM_USB_HS=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 3148567b66b6..14c17a218ec5 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -17,6 +17,9 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_ARCH_MULTI_V4T=y +CONFIG_ARCH_MULTI_V5=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_OMAP=y CONFIG_ARCH_OMAP1=y CONFIG_OMAP_RESET_CLOCKS=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index d933b787d934..9380df6b530f 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -553,6 +553,8 @@ CONFIG_SND_SOC_OMAP_ABE_TWL6040=m CONFIG_SND_SOC_OMAP_HDMI=m CONFIG_SND_SOC_CPCAP=m CONFIG_SND_SOC_TLV320AIC23_I2C=m +CONFIG_SND_SOC_TLV320AIC3X=m +CONFIG_SND_SOC_TLV320AIC3X_I2C=m CONFIG_SND_SIMPLE_CARD=m CONFIG_SND_AUDIO_GRAPH_CARD=m CONFIG_HID_GENERIC=m @@ -576,6 +578,7 @@ CONFIG_USB_INVENTRA_DMA=y CONFIG_USB_TI_CPPI41_DMA=y CONFIG_USB_TUSB_OMAP_DMA=y CONFIG_USB_DWC3=m +CONFIG_USB_ISP1760=m CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_SIMPLE=m diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig index b47c8abe85bc..e6acb1d588e2 100644 --- a/arch/arm/configs/palmz72_defconfig +++ b/arch/arm/configs/palmz72_defconfig @@ -7,6 +7,7 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_PXA_PALM=y # CONFIG_MACH_PALMTX is not set diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig index e97a158081fc..106d5bef48e2 100644 --- a/arch/arm/configs/pcm027_defconfig +++ b/arch/arm/configs/pcm027_defconfig @@ -13,6 +13,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_PCM027=y CONFIG_MACH_PCM990_BASEBOARD=y diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig index 4a383afa5e87..5663245e9534 100644 --- a/arch/arm/configs/pxa255-idp_defconfig +++ b/arch/arm/configs/pxa255-idp_defconfig @@ -1,6 +1,7 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_MODULES=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_PXA_IDP=y # CONFIG_ARM_THUMB is not set diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig index f0c34017f2aa..228d4271748b 100644 --- a/arch/arm/configs/pxa3xx_defconfig +++ b/arch/arm/configs/pxa3xx_defconfig @@ -6,6 +6,7 @@ CONFIG_KALLSYMS_ALL=y CONFIG_SLAB=y CONFIG_MODULES=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_LITTLETON=y CONFIG_MACH_TAVOREVB=y diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index 29b1f192afbb..1db70dfd32d2 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -23,6 +23,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_PARTITION_ADVANCED=y CONFIG_LDM_PARTITION=y CONFIG_CMDLINE_PARTITION=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_LUBBOCK=y CONFIG_MACH_MAINSTONE=y diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index 9981566f2096..5cd935ee148a 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -295,12 +295,20 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y +CONFIG_CRYPTO_USER=m +CONFIG_CRYPTO_USER_API=m +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_USER_API_AEAD=m +CONFIG_CRYPTO_USER_API_RNG=m +CONFIG_CRYPTO_DEV_QCOM_RNG=m CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set CONFIG_WATCHDOG=y CONFIG_QCOM_WDT=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 153009130dab..12fa6ca14dcc 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -4,6 +4,9 @@ CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_BLK_DEV_INITRD=y CONFIG_SLAB=y +CONFIG_ARCH_MULTI_V4T=y +CONFIG_ARCH_MULTI_V5=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_S3C24XX=y CONFIG_S3C_ADC=y CONFIG_CPU_S3C2412=y @@ -358,6 +361,8 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_S3C=y CONFIG_DMADEVICES=y CONFIG_S3C24XX_DMAC=y +CONFIG_PWM=y +CONFIG_PWM_SAMSUNG=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 03dd80c2a19e..18852803522e 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -57,13 +57,13 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_TESTS=m CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_FASTMAP=y +CONFIG_MTD_UBI_BLOCK=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 @@ -222,6 +222,7 @@ CONFIG_PWM_ATMEL_HLCDC_PWM=y CONFIG_PWM_ATMEL_TCB=y CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y +CONFIG_AUTOFS_FS=m CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_UBIFS_FS=y diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig index 07b0494ef743..63302858b9c4 100644 --- a/arch/arm/configs/sama7_defconfig +++ b/arch/arm/configs/sama7_defconfig @@ -94,6 +94,8 @@ CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_ECC_SW_HAMMING is not set CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_FASTMAP=y +CONFIG_MTD_UBI_BLOCK=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=1 @@ -138,6 +140,8 @@ CONFIG_MEDIA_SUPPORT_FILTER=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_PLATFORM_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_ATMEL_XISC=y +CONFIG_VIDEO_MICROCHIP_CSI2DC=y CONFIG_VIDEO_IMX219=m CONFIG_VIDEO_IMX274=m CONFIG_VIDEO_OV5647=m @@ -149,6 +153,8 @@ CONFIG_SND_SOC_MIKROE_PROTO=m CONFIG_SND_MCHP_SOC_I2S_MCC=y CONFIG_SND_MCHP_SOC_SPDIFTX=y CONFIG_SND_MCHP_SOC_SPDIFRX=y +CONFIG_SND_MCHP_SOC_PDMC=y +CONFIG_SND_SOC_DMIC=y CONFIG_SND_SOC_PCM5102A=y CONFIG_SND_SOC_SPDIF=y CONFIG_SND_SIMPLE_CARD=y @@ -190,9 +196,11 @@ CONFIG_AT91_SAMA5D2_ADC=y CONFIG_PWM=y CONFIG_PWM_ATMEL=y CONFIG_MCHP_EIC=y +CONFIG_RESET_CONTROLLER=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_FANOTIFY=y +CONFIG_AUTOFS_FS=m CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_UBIFS_FS=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index db8df8a3a7b1..362643cbeffd 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -119,9 +119,9 @@ CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_PLATFORM_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_RENESAS_CEU=y CONFIG_VIDEO_RCAR_VIN=y -CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_RENESAS_FDP1=y CONFIG_VIDEO_RENESAS_JPU=y CONFIG_VIDEO_RENESAS_VSP1=y @@ -224,5 +224,5 @@ CONFIG_NLS_ISO8859_1=y CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_FS=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index f42c7a502b6e..43d079ee342a 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -9,6 +9,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_PXA_SHARPSL=y CONFIG_MACH_AKITA=y diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig index 551db328009d..71d6bfcf4551 100644 --- a/arch/arm/configs/stm32_defconfig +++ b/arch/arm/configs/stm32_defconfig @@ -28,7 +28,6 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_XIP_KERNEL=y CONFIG_XIP_PHYS_ADDR=0x08008000 CONFIG_BINFMT_FLAT=y -CONFIG_BINFMT_SHARED_FLAT=y # CONFIG_COREDUMP is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 3a9503fe84cb..46cbae6d1b1f 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -13,6 +13,8 @@ CONFIG_SLOB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_ARCH_MULTI_V4T=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_S3C24XX=y CONFIG_MACH_TCT_HAMMER=y CONFIG_ZBOOT_ROM_TEXT=0x0 diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 289d022acc4b..c209722399d7 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -286,7 +286,8 @@ CONFIG_SERIO_NVEC_PS2=y CONFIG_NVEC_POWER=y CONFIG_NVEC_PAZ00=y CONFIG_STAGING_MEDIA=y -CONFIG_TEGRA_VDE=y +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_TEGRA_VDE=y CONFIG_CHROME_PLATFORMS=y CONFIG_CROS_EC=y CONFIG_CROS_EC_I2C=m diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig index d66f0c287d41..baeba4667e9b 100644 --- a/arch/arm/configs/trizeps4_defconfig +++ b/arch/arm/configs/trizeps4_defconfig @@ -14,6 +14,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_TRIZEPS_PXA=y CONFIG_MACH_TRIZEPS4=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 3b30913d7d8d..a352207a64d7 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -20,7 +20,6 @@ CONFIG_VFP=y CONFIG_NEON=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y CONFIG_CMA=y CONFIG_NET=y @@ -41,6 +40,8 @@ CONFIG_MAC80211_LEDS=y CONFIG_CAIF=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_GNSS=y +CONFIG_GNSS_SIRF_SERIAL=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_NETDEVICES=y @@ -83,6 +84,8 @@ CONFIG_SPI_GPIO=y CONFIG_SPI_PL022=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_TC3589X=y +CONFIG_BATTERY_SAMSUNG_SDI=y +CONFIG_AB8500_BM=y CONFIG_SENSORS_IIO_HWMON=y CONFIG_SENSORS_NTC_THERMISTOR=y CONFIG_THERMAL=y @@ -98,10 +101,13 @@ CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_V4L2_FLASH_LED_CLASS=y CONFIG_DRM=y CONFIG_DRM_PANEL_NOVATEK_NT35510=y +CONFIG_DRM_PANEL_NOVATEK_NT35560=y +CONFIG_DRM_PANEL_SAMSUNG_DB7430=y CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y +CONFIG_DRM_PANEL_SAMSUNG_S6D27A1=y CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=y CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI=y -CONFIG_DRM_PANEL_SONY_ACX424AKP=y +CONFIG_DRM_PANEL_WIDECHIPS_WS2401=y CONFIG_DRM_LIMA=y CONFIG_DRM_MCDE=y CONFIG_FB=y @@ -129,6 +135,7 @@ CONFIG_LEDS_LM3530=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_LP55XX_COMMON=y CONFIG_LEDS_LP5521=y +CONFIG_LEDS_REGULATOR=y CONFIG_LEDS_RT8515=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y @@ -144,17 +151,22 @@ CONFIG_IIO_SW_TRIGGER=y CONFIG_BMA180=y CONFIG_BMC150_ACCEL=y CONFIG_IIO_ST_ACCEL_3AXIS=y +# CONFIG_IIO_ST_ACCEL_SPI_3AXIS is not set CONFIG_IIO_RESCALE=y CONFIG_MPU3050_I2C=y CONFIG_IIO_ST_GYRO_3AXIS=y +# CONFIG_IIO_ST_GYRO_SPI_3AXIS is not set CONFIG_INV_MPU6050_I2C=y CONFIG_BH1780=y CONFIG_GP2AP002=y +CONFIG_TSL2772=y CONFIG_AK8974=y CONFIG_IIO_ST_MAGN_3AXIS=y +# CONFIG_IIO_ST_MAGN_SPI_3AXIS is not set CONFIG_YAMAHA_YAS530=y CONFIG_IIO_HRTIMER_TRIGGER=y CONFIG_IIO_ST_PRESS=y +# CONFIG_IIO_ST_PRESS_SPI is not set CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -173,10 +185,9 @@ CONFIG_CRYPTO_DEV_UX500_CRYP=y CONFIG_CRYPTO_DEV_UX500_HASH=y CONFIG_CRYPTO_DEV_UX500_DEBUG=y CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/vf610m4_defconfig b/arch/arm/configs/vf610m4_defconfig index a89f035c3b01..70fdbfd83484 100644 --- a/arch/arm/configs/vf610m4_defconfig +++ b/arch/arm/configs/vf610m4_defconfig @@ -18,7 +18,6 @@ CONFIG_XIP_KERNEL=y CONFIG_XIP_PHYS_ADDR=0x0f000080 CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -CONFIG_BINFMT_SHARED_FLAT=y # CONFIG_SUSPEND is not set # CONFIG_UEVENT_HELPER is not set # CONFIG_STANDALONE is not set diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index c28539bfd128..7c1029716ea5 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -9,6 +9,7 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_VIPER=y CONFIG_IWMMXT=y diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig index 4d8e7f2eaef7..3752672f980e 100644 --- a/arch/arm/configs/xcep_defconfig +++ b/arch/arm/configs/xcep_defconfig @@ -19,6 +19,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLOCK is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_XCEP=y CONFIG_IWMMXT=y diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 25bb6995f105..03a12fb51259 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -4,6 +4,7 @@ CONFIG_LOG_BUF_SHIFT=13 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_ARCOM_ZEUS=y CONFIG_PCCARD=m diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h index 413abfb42989..f82a819eb0db 100644 --- a/arch/arm/include/asm/arch_gicv3.h +++ b/arch/arm/include/asm/arch_gicv3.h @@ -48,6 +48,7 @@ static inline u32 read_ ## a64(void) \ return read_sysreg(a32); \ } \ +CPUIF_MAP(ICC_EOIR1, ICC_EOIR1_EL1) CPUIF_MAP(ICC_PMR, ICC_PMR_EL1) CPUIF_MAP(ICC_AP0R0, ICC_AP0R0_EL1) CPUIF_MAP(ICC_AP0R1, ICC_AP0R1_EL1) @@ -63,12 +64,6 @@ CPUIF_MAP(ICC_AP1R3, ICC_AP1R3_EL1) /* Low-level accessors */ -static inline void gic_write_eoir(u32 irq) -{ - write_sysreg(irq, ICC_EOIR1); - isb(); -} - static inline void gic_write_dir(u32 val) { write_sysreg(val, ICC_DIR); diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 34fe8d2dd5d1..90fbe4a3f9c8 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -666,12 +666,11 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) __adldst_l str, \src, \sym, \tmp, \cond .endm - .macro __ldst_va, op, reg, tmp, sym, cond + .macro __ldst_va, op, reg, tmp, sym, cond, offset #if __LINUX_ARM_ARCH__ >= 7 || \ !defined(CONFIG_ARM_HAS_GROUP_RELOCS) || \ (defined(MODULE) && defined(CONFIG_ARM_MODULE_PLTS)) mov_l \tmp, \sym, \cond - \op\cond \reg, [\tmp] #else /* * Avoid a literal load, by emitting a sequence of ADD/LDR instructions @@ -683,24 +682,29 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) .reloc .L0_\@, R_ARM_ALU_PC_G0_NC, \sym .reloc .L1_\@, R_ARM_ALU_PC_G1_NC, \sym .reloc .L2_\@, R_ARM_LDR_PC_G2, \sym -.L0_\@: sub\cond \tmp, pc, #8 -.L1_\@: sub\cond \tmp, \tmp, #4 -.L2_\@: \op\cond \reg, [\tmp, #0] +.L0_\@: sub\cond \tmp, pc, #8 - \offset +.L1_\@: sub\cond \tmp, \tmp, #4 - \offset +.L2_\@: #endif + \op\cond \reg, [\tmp, #\offset] .endm /* * ldr_va - load a 32-bit word from the virtual address of \sym */ - .macro ldr_va, rd:req, sym:req, cond - __ldst_va ldr, \rd, \rd, \sym, \cond + .macro ldr_va, rd:req, sym:req, cond, tmp, offset=0 + .ifnb \tmp + __ldst_va ldr, \rd, \tmp, \sym, \cond, \offset + .else + __ldst_va ldr, \rd, \rd, \sym, \cond, \offset + .endif .endm /* * str_va - store a 32-bit word to the virtual address of \sym */ .macro str_va, rn:req, sym:req, tmp:req, cond - __ldst_va str, \rn, \tmp, \sym, \cond + __ldst_va str, \rn, \tmp, \sym, \cond, 0 .endm /* @@ -727,9 +731,11 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) * are permitted to overlap with 'rd' if != sp */ .macro ldr_this_cpu, rd:req, sym:req, t1:req, t2:req -#if __LINUX_ARM_ARCH__ >= 7 || \ - !defined(CONFIG_ARM_HAS_GROUP_RELOCS) || \ - (defined(MODULE) && defined(CONFIG_ARM_MODULE_PLTS)) +#ifndef CONFIG_SMP + ldr_va \rd, \sym, tmp=\t1 +#elif __LINUX_ARM_ARCH__ >= 7 || \ + !defined(CONFIG_ARM_HAS_GROUP_RELOCS) || \ + (defined(MODULE) && defined(CONFIG_ARM_MODULE_PLTS)) this_cpu_offset \t1 mov_l \t2, \sym ldr \rd, [\t1, \t2] diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h index 2e70db6f22ea..d8c6f8a99dfa 100644 --- a/arch/arm/include/asm/hardware/sa1111.h +++ b/arch/arm/include/asm/hardware/sa1111.h @@ -13,8 +13,6 @@ #ifndef _ASM_ARCH_SA1111 #define _ASM_ARCH_SA1111 -#include <mach/bitfield.h> - /* * Don't ask the (SAC) DMA engines to move less than this amount. */ diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 0c70eb688a00..eba7cbc93b86 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -174,7 +174,7 @@ static inline void __iomem *__typesafe_io(unsigned long addr) #define PCI_IO_VIRT_BASE 0xfee00000 #define PCI_IOBASE ((void __iomem *)PCI_IO_VIRT_BASE) -#if defined(CONFIG_PCI) +#if defined(CONFIG_PCI) || IS_ENABLED(CONFIG_PCMCIA) void pci_ioremap_set_mem_type(int mem_type); #else static inline void pci_ioremap_set_mem_type(int mem_type) {} @@ -200,32 +200,13 @@ void __iomem *pci_remap_cfgspace(resource_size_t res_cookie, size_t size); */ #ifdef CONFIG_NEED_MACH_IO_H #include <mach/io.h> -#elif defined(CONFIG_PCI) -#define IO_SPACE_LIMIT ((resource_size_t)0xfffff) -#define __io(a) __typesafe_io(PCI_IO_VIRT_BASE + ((a) & IO_SPACE_LIMIT)) #else -#define __io(a) __typesafe_io((a) & IO_SPACE_LIMIT) -#endif - -/* - * This is the limit of PC card/PCI/ISA IO space, which is by default - * 64K if we have PC card, PCI or ISA support. Otherwise, default to - * zero to prevent ISA/PCI drivers claiming IO space (and potentially - * oopsing.) - * - * Only set this larger if you really need inb() et.al. to operate over - * a larger address space. Note that SOC_COMMON ioremaps each sockets - * IO space area, and so inb() et.al. must be defined to operate as per - * readb() et.al. on such platforms. - */ -#ifndef IO_SPACE_LIMIT -#if defined(CONFIG_PCMCIA_SOC_COMMON) || defined(CONFIG_PCMCIA_SOC_COMMON_MODULE) -#define IO_SPACE_LIMIT ((resource_size_t)0xffffffff) -#elif defined(CONFIG_PCI) || defined(CONFIG_ISA) || defined(CONFIG_PCCARD) -#define IO_SPACE_LIMIT ((resource_size_t)0xffff) +#if IS_ENABLED(CONFIG_PCMCIA) || defined(CONFIG_PCI) +#define IO_SPACE_LIMIT ((resource_size_t)0xfffff) #else #define IO_SPACE_LIMIT ((resource_size_t)0) #endif +#define __io(a) __typesafe_io(PCI_IO_VIRT_BASE + ((a) & IO_SPACE_LIMIT)) #endif /* @@ -440,6 +421,9 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr); #define ARCH_HAS_VALID_PHYS_ADDR_RANGE extern int valid_phys_addr_range(phys_addr_t addr, size_t size); extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); +extern bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size, + unsigned long flags); +#define arch_memremap_can_ram_remap arch_memremap_can_ram_remap #endif /* diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h index cfffae67c04e..5546c9751478 100644 --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -3,20 +3,10 @@ #define _ASM_ARM_MODULE_H #include <asm-generic/module.h> - -struct unwind_table; +#include <asm/unwind.h> #ifdef CONFIG_ARM_UNWIND -enum { - ARM_SEC_INIT, - ARM_SEC_DEVINIT, - ARM_SEC_CORE, - ARM_SEC_EXIT, - ARM_SEC_DEVEXIT, - ARM_SEC_HOT, - ARM_SEC_UNLIKELY, - ARM_SEC_MAX, -}; +#define ELF_SECTION_UNWIND 0x70000001 #endif #define PLT_ENT_STRIDE L1_CACHE_BYTES @@ -36,7 +26,8 @@ struct mod_plt_sec { struct mod_arch_specific { #ifdef CONFIG_ARM_UNWIND - struct unwind_table *unwind[ARM_SEC_MAX]; + struct list_head unwind_list; + struct unwind_table *init_table; #endif #ifdef CONFIG_ARM_MODULE_PLTS struct mod_plt_sec core; diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h index 7c3b3671d6c2..6d1337c169cd 100644 --- a/arch/arm/include/asm/timex.h +++ b/arch/arm/include/asm/timex.h @@ -11,5 +11,6 @@ typedef unsigned long cycles_t; #define get_cycles() ({ cycles_t c; read_current_timer(&c) ? 0 : c; }) +#define random_get_entropy() (((unsigned long)get_cycles()) ?: random_get_entropy_fallback()) #endif diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h index 0f8a3439902d..b51f85417f58 100644 --- a/arch/arm/include/asm/unwind.h +++ b/arch/arm/include/asm/unwind.h @@ -24,6 +24,7 @@ struct unwind_idx { struct unwind_table { struct list_head list; + struct list_head mod_list; const struct unwind_idx *start; const struct unwind_idx *origin; const struct unwind_idx *stop; diff --git a/arch/arm/include/asm/xen/page-coherent.h b/arch/arm/include/asm/xen/page-coherent.h deleted file mode 100644 index 27e984977402..000000000000 --- a/arch/arm/include/asm/xen/page-coherent.h +++ /dev/null @@ -1,2 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#include <xen/arm/page-coherent.h> diff --git a/arch/arm/kernel/crash_dump.c b/arch/arm/kernel/crash_dump.c index 53cb92435392..938bd932df9a 100644 --- a/arch/arm/kernel/crash_dump.c +++ b/arch/arm/kernel/crash_dump.c @@ -14,22 +14,10 @@ #include <linux/crash_dump.h> #include <linux/uaccess.h> #include <linux/io.h> +#include <linux/uio.h> -/** - * copy_oldmem_page() - copy one page from old kernel memory - * @pfn: page frame number to be copied - * @buf: buffer where the copied page is placed - * @csize: number of bytes to copy - * @offset: offset in bytes into the page - * @userbuf: if set, @buf is int he user address space - * - * This function copies one page from old kernel memory into buffer pointed by - * @buf. If @buf is in userspace, set @userbuf to %1. Returns number of bytes - * copied or negative error in case of failure. - */ -ssize_t copy_oldmem_page(unsigned long pfn, char *buf, - size_t csize, unsigned long offset, - int userbuf) +ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn, + size_t csize, unsigned long offset) { void *vaddr; @@ -40,14 +28,7 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, if (!vaddr) return -ENOMEM; - if (userbuf) { - if (copy_to_user(buf, vaddr + offset, csize)) { - iounmap(vaddr); - return -EFAULT; - } - } else { - memcpy(buf, vaddr + offset, csize); - } + csize = copy_to_iter(vaddr + offset, csize, iter); iounmap(vaddr); return csize; diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 06508698abb8..c39303e5c234 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -61,9 +61,8 @@ .macro pabt_helper @ PABORT handler takes pt_regs in r2, fault address in r4 and psr in r5 #ifdef MULTI_PABORT - ldr ip, .LCprocfns - mov lr, pc - ldr pc, [ip, #PROCESSOR_PABT_FUNC] + ldr_va ip, processor, offset=PROCESSOR_PABT_FUNC + bl_r ip #else bl CPU_PABORT_HANDLER #endif @@ -82,9 +81,8 @@ @ the fault status register in r1. r9 must be preserved. @ #ifdef MULTI_DABORT - ldr ip, .LCprocfns - mov lr, pc - ldr pc, [ip, #PROCESSOR_DABT_FUNC] + ldr_va ip, processor, offset=PROCESSOR_DABT_FUNC + bl_r ip #else bl CPU_DABORT_HANDLER #endif @@ -302,16 +300,6 @@ __fiq_svc: UNWIND(.fnend ) ENDPROC(__fiq_svc) - .align 5 -.LCcralign: - .word cr_alignment -#ifdef MULTI_DABORT -.LCprocfns: - .word processor -#endif -.LCfp: - .word fp_enter - /* * Abort mode handlers */ @@ -370,7 +358,7 @@ ENDPROC(__fiq_abt) THUMB( stmia sp, {r0 - r12} ) ATRAP( mrc p15, 0, r7, c1, c0, 0) - ATRAP( ldr r8, .LCcralign) + ATRAP( ldr_va r8, cr_alignment) ldmia r0, {r3 - r5} add r0, sp, #S_PC @ here for interlock avoidance @@ -379,8 +367,6 @@ ENDPROC(__fiq_abt) str r3, [sp] @ save the "real" r0 copied @ from the exception stack - ATRAP( ldr r8, [r8, #0]) - @ @ We are now ready to fill in the remaining blanks on the stack: @ @@ -505,9 +491,7 @@ __und_usr_thumb: */ #if __LINUX_ARM_ARCH__ < 7 /* If the target CPU may not be Thumb-2-capable, a run-time check is needed: */ -#define NEED_CPU_ARCHITECTURE - ldr r5, .LCcpu_architecture - ldr r5, [r5] + ldr_va r5, cpu_architecture cmp r5, #CPU_ARCH_ARMv7 blo __und_usr_fault_16 @ 16bit undefined instruction /* @@ -654,12 +638,6 @@ call_fpe: ret.w lr @ CP#14 (Debug) ret.w lr @ CP#15 (Control) -#ifdef NEED_CPU_ARCHITECTURE - .align 2 -.LCcpu_architecture: - .word __cpu_architecture -#endif - #ifdef CONFIG_NEON .align 6 @@ -685,9 +663,8 @@ call_fpe: #endif do_fpe: - ldr r4, .LCfp add r10, r10, #TI_FPSTATE @ r10 = workspace - ldr pc, [r4] @ Call FP module USR entry point + ldr_va pc, fp_enter, tmp=r4 @ Call FP module USR entry point /* * The FP module is called with these registers set: @@ -1101,6 +1078,12 @@ __kuser_helper_end: */ .macro vector_stub, name, mode, correction=0 .align 5 +#ifdef CONFIG_HARDEN_BRANCH_HISTORY +vector_bhb_bpiall_\name: + mcr p15, 0, r0, c7, c5, 6 @ BPIALL + @ isb not needed due to "movs pc, lr" in the vector stub + @ which gives a "context synchronisation". +#endif vector_\name: .if \correction @@ -1111,7 +1094,8 @@ vector_\name: stmia sp, {r0, lr} @ save r0, lr @ Save spsr_<exception> (parent CPSR) -2: mrs lr, spsr +.Lvec_\name: + mrs lr, spsr str lr, [sp, #8] @ save spsr @ @@ -1145,28 +1129,14 @@ vector_bhb_loop8_\name: @ bhb workaround mov r0, #8 -3: b . + 4 +3: W(b) . + 4 subs r0, r0, #1 bne 3b - dsb - isb - b 2b -ENDPROC(vector_bhb_loop8_\name) - -vector_bhb_bpiall_\name: - .if \correction - sub lr, lr, #\correction - .endif - - @ Save r0, lr_<exception> (parent PC) - stmia sp, {r0, lr} - - @ bhb workaround - mcr p15, 0, r0, c7, c5, 6 @ BPIALL + dsb nsh @ isb not needed due to "movs pc, lr" in the vector stub @ which gives a "context synchronisation". - b 2b -ENDPROC(vector_bhb_bpiall_\name) + b .Lvec_\name +ENDPROC(vector_bhb_loop8_\name) .previous #endif @@ -1176,10 +1146,15 @@ ENDPROC(vector_bhb_bpiall_\name) .endm .section .stubs, "ax", %progbits - @ This must be the first word + @ These need to remain at the start of the section so that + @ they are in range of the 'SWI' entries in the vector tables + @ located 4k down. +.L__vector_swi: .word vector_swi #ifdef CONFIG_HARDEN_BRANCH_HISTORY +.L__vector_bhb_loop8_swi: .word vector_bhb_loop8_swi +.L__vector_bhb_bpiall_swi: .word vector_bhb_bpiall_swi #endif @@ -1322,10 +1297,11 @@ vector_addrexcptn: .globl vector_fiq .section .vectors, "ax", %progbits -.L__vectors_start: W(b) vector_rst W(b) vector_und - W(ldr) pc, .L__vectors_start + 0x1000 +ARM( .reloc ., R_ARM_LDR_PC_G0, .L__vector_swi ) +THUMB( .reloc ., R_ARM_THM_PC12, .L__vector_swi ) + W(ldr) pc, . W(b) vector_pabt W(b) vector_dabt W(b) vector_addrexcptn @@ -1334,10 +1310,11 @@ vector_addrexcptn: #ifdef CONFIG_HARDEN_BRANCH_HISTORY .section .vectors.bhb.loop8, "ax", %progbits -.L__vectors_bhb_loop8_start: W(b) vector_rst W(b) vector_bhb_loop8_und - W(ldr) pc, .L__vectors_bhb_loop8_start + 0x1004 +ARM( .reloc ., R_ARM_LDR_PC_G0, .L__vector_bhb_loop8_swi ) +THUMB( .reloc ., R_ARM_THM_PC12, .L__vector_bhb_loop8_swi ) + W(ldr) pc, . W(b) vector_bhb_loop8_pabt W(b) vector_bhb_loop8_dabt W(b) vector_addrexcptn @@ -1345,10 +1322,11 @@ vector_addrexcptn: W(b) vector_bhb_loop8_fiq .section .vectors.bhb.bpiall, "ax", %progbits -.L__vectors_bhb_bpiall_start: W(b) vector_rst W(b) vector_bhb_bpiall_und - W(ldr) pc, .L__vectors_bhb_bpiall_start + 0x1008 +ARM( .reloc ., R_ARM_LDR_PC_G0, .L__vector_bhb_bpiall_swi ) +THUMB( .reloc ., R_ARM_THM_PC12, .L__vector_bhb_bpiall_swi ) + W(ldr) pc, . W(b) vector_bhb_bpiall_pabt W(b) vector_bhb_bpiall_dabt W(b) vector_addrexcptn diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 90d40f4d56cf..7aa3ded4af92 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -164,7 +164,7 @@ ENTRY(vector_bhb_loop8_swi) 1: b 2f 2: subs r8, r8, #1 bne 1b - dsb + dsb nsh isb b 3f ENDPROC(vector_bhb_loop8_swi) @@ -198,7 +198,7 @@ ENTRY(vector_swi) #endif reload_current r10, ip zero_fp - alignment_trap r10, ip, __cr_alignment + alignment_trap r10, ip, cr_alignment asm_trace_hardirqs_on save=0 enable_irq_notrace ct_user_exit save=0 @@ -328,14 +328,6 @@ __sys_trace_return: bl syscall_trace_exit b ret_slow_syscall - .align 5 -#ifdef CONFIG_ALIGNMENT_TRAP - .type __cr_alignment, #object -__cr_alignment: - .word cr_alignment -#endif - .ltorg - .macro syscall_table_start, sym .equ __sys_nr, 0 .type \sym, #object diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 9a1dc142f782..5865621bf691 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -48,8 +48,7 @@ .macro alignment_trap, rtmp1, rtmp2, label #ifdef CONFIG_ALIGNMENT_TRAP mrc p15, 0, \rtmp2, c1, c0, 0 - ldr \rtmp1, \label - ldr \rtmp1, [\rtmp1] + ldr_va \rtmp1, \label teq \rtmp1, \rtmp2 mcrne p15, 0, \rtmp1, c1, c0, 0 #endif diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index 83cc068586bc..a0b6d1e3812f 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -79,16 +79,14 @@ static unsigned long __ref adjust_address(struct dyn_ftrace *rec, return (unsigned long)&ftrace_regs_caller_from_init; } -int ftrace_arch_code_modify_prepare(void) +void ftrace_arch_code_modify_prepare(void) { - return 0; } -int ftrace_arch_code_modify_post_process(void) +void ftrace_arch_code_modify_post_process(void) { /* Make sure any TLB misses during machine stop are cleared. */ flush_tlb_all(); - return 0; } static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr, diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index b1423fb130ea..054e9199f30d 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -941,6 +941,23 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, return ret; } +#ifdef CONFIG_ARM_ERRATA_764319 +static int oslsr_fault; + +static int debug_oslsr_trap(struct pt_regs *regs, unsigned int instr) +{ + oslsr_fault = 1; + instruction_pointer(regs) += 4; + return 0; +} + +static struct undef_hook debug_oslsr_hook = { + .instr_mask = 0xffffffff, + .instr_val = 0xee115e91, + .fn = debug_oslsr_trap, +}; +#endif + /* * One-time initialisation. */ @@ -974,7 +991,16 @@ static bool core_has_os_save_restore(void) case ARM_DEBUG_ARCH_V7_1: return true; case ARM_DEBUG_ARCH_V7_ECP14: +#ifdef CONFIG_ARM_ERRATA_764319 + oslsr_fault = 0; + register_undef_hook(&debug_oslsr_hook); ARM_DBG_READ(c1, c1, 4, oslsr); + unregister_undef_hook(&debug_oslsr_hook); + if (oslsr_fault) + return false; +#else + ARM_DBG_READ(c1, c1, 4, oslsr); +#endif if (oslsr & ARM_OSLSR_OSLM0) return true; fallthrough; diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 549abcedf795..d59c36dc0494 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -459,46 +459,40 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, #ifdef CONFIG_ARM_UNWIND const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; const Elf_Shdr *sechdrs_end = sechdrs + hdr->e_shnum; - struct mod_unwind_map maps[ARM_SEC_MAX]; - int i; + struct list_head *unwind_list = &mod->arch.unwind_list; - memset(maps, 0, sizeof(maps)); + INIT_LIST_HEAD(unwind_list); + mod->arch.init_table = NULL; for (s = sechdrs; s < sechdrs_end; s++) { const char *secname = secstrs + s->sh_name; + const char *txtname; + const Elf_Shdr *txt_sec; - if (!(s->sh_flags & SHF_ALLOC)) + if (!(s->sh_flags & SHF_ALLOC) || + s->sh_type != ELF_SECTION_UNWIND) continue; - if (strcmp(".ARM.exidx.init.text", secname) == 0) - maps[ARM_SEC_INIT].unw_sec = s; - else if (strcmp(".ARM.exidx", secname) == 0) - maps[ARM_SEC_CORE].unw_sec = s; - else if (strcmp(".ARM.exidx.exit.text", secname) == 0) - maps[ARM_SEC_EXIT].unw_sec = s; - else if (strcmp(".ARM.exidx.text.unlikely", secname) == 0) - maps[ARM_SEC_UNLIKELY].unw_sec = s; - else if (strcmp(".ARM.exidx.text.hot", secname) == 0) - maps[ARM_SEC_HOT].unw_sec = s; - else if (strcmp(".init.text", secname) == 0) - maps[ARM_SEC_INIT].txt_sec = s; - else if (strcmp(".text", secname) == 0) - maps[ARM_SEC_CORE].txt_sec = s; - else if (strcmp(".exit.text", secname) == 0) - maps[ARM_SEC_EXIT].txt_sec = s; - else if (strcmp(".text.unlikely", secname) == 0) - maps[ARM_SEC_UNLIKELY].txt_sec = s; - else if (strcmp(".text.hot", secname) == 0) - maps[ARM_SEC_HOT].txt_sec = s; - } + if (!strcmp(".ARM.exidx", secname)) + txtname = ".text"; + else + txtname = secname + strlen(".ARM.exidx"); + txt_sec = find_mod_section(hdr, sechdrs, txtname); + + if (txt_sec) { + struct unwind_table *table = + unwind_table_add(s->sh_addr, + s->sh_size, + txt_sec->sh_addr, + txt_sec->sh_size); - for (i = 0; i < ARM_SEC_MAX; i++) - if (maps[i].unw_sec && maps[i].txt_sec) - mod->arch.unwind[i] = - unwind_table_add(maps[i].unw_sec->sh_addr, - maps[i].unw_sec->sh_size, - maps[i].txt_sec->sh_addr, - maps[i].txt_sec->sh_size); + list_add(&table->mod_list, unwind_list); + + /* save init table for module_arch_freeing_init */ + if (strcmp(".ARM.exidx.init.text", secname) == 0) + mod->arch.init_table = table; + } + } #endif #ifdef CONFIG_ARM_PATCH_PHYS_VIRT s = find_mod_section(hdr, sechdrs, ".pv_table"); @@ -519,19 +513,27 @@ void module_arch_cleanup(struct module *mod) { #ifdef CONFIG_ARM_UNWIND - int i; + struct unwind_table *tmp; + struct unwind_table *n; - for (i = 0; i < ARM_SEC_MAX; i++) { - unwind_table_del(mod->arch.unwind[i]); - mod->arch.unwind[i] = NULL; + list_for_each_entry_safe(tmp, n, + &mod->arch.unwind_list, mod_list) { + list_del(&tmp->mod_list); + unwind_table_del(tmp); } + mod->arch.init_table = NULL; #endif } void __weak module_arch_freeing_init(struct module *mod) { #ifdef CONFIG_ARM_UNWIND - unwind_table_del(mod->arch.unwind[ARM_SEC_INIT]); - mod->arch.unwind[ARM_SEC_INIT] = NULL; + struct unwind_table *init = mod->arch.init_table; + + if (init) { + mod->arch.init_table = NULL; + list_del(&init->mod_list); + unwind_table_del(init); + } #endif } diff --git a/arch/arm/kernel/reboot.c b/arch/arm/kernel/reboot.c index 3044fcb8d073..2cb943422554 100644 --- a/arch/arm/kernel/reboot.c +++ b/arch/arm/kernel/reboot.c @@ -116,9 +116,7 @@ void machine_power_off(void) { local_irq_disable(); smp_send_stop(); - - if (pm_power_off) - pm_power_off(); + do_kernel_power_off(); } /* diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 459abc5d1819..ea128e32e8ca 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -708,6 +708,7 @@ static_assert(offsetof(siginfo_t, si_upper) == 0x18); static_assert(offsetof(siginfo_t, si_pkey) == 0x14); static_assert(offsetof(siginfo_t, si_perf_data) == 0x10); static_assert(offsetof(siginfo_t, si_perf_type) == 0x14); +static_assert(offsetof(siginfo_t, si_perf_flags) == 0x18); static_assert(offsetof(siginfo_t, si_band) == 0x0c); static_assert(offsetof(siginfo_t, si_fd) == 0x10); static_assert(offsetof(siginfo_t, si_call_addr) == 0x0c); diff --git a/arch/arm/mach-asm9260/Kconfig b/arch/arm/mach-asm9260/Kconfig index a2e1d0aaf252..74e0f61c74c8 100644 --- a/arch/arm/mach-asm9260/Kconfig +++ b/arch/arm/mach-asm9260/Kconfig @@ -2,6 +2,7 @@ config MACH_ASM9260 bool "Alphascale ASM9260" depends on ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN select CPU_ARM926T select ASM9260_TIMER help diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig index ea96d11b8502..cd8a15be0724 100644 --- a/arch/arm/mach-aspeed/Kconfig +++ b/arch/arm/mach-aspeed/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_ASPEED bool "Aspeed BMC architectures" - depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7 + depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V6 || ARCH_MULTI_V7 select SRAM select WATCHDOG select ASPEED_WATCHDOG diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 279810381256..3dd9e718661b 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -1,7 +1,8 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_AT91 bool "AT91/Microchip SoCs" - depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M + depends on (CPU_LITTLE_ENDIAN && (ARCH_MULTI_V4T || ARCH_MULTI_V5)) || \ + ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M select ARM_CPU_SUSPEND if PM && ARCH_MULTI_V7 select COMMON_CLK_AT91 select GPIOLIB @@ -165,6 +166,15 @@ config ATMEL_CLOCKSOURCE_TCB to make a single 32-bit timer. It can also be used as a clock event device supporting oneshot mode. +config MICROCHIP_CLOCKSOURCE_PIT64B + bool "64-bit Periodic Interval Timer (PIT64B) support" + default SOC_SAM9X60 || SOC_SAMA7 + select MICROCHIP_PIT64B + help + Select this to get a high resolution clockevent (SAM9X60) or + clocksource and clockevent (SAMA7G5) based on Microchip 64-bit + Periodic Interval Timer. + config HAVE_AT91_UTMI bool @@ -211,6 +221,15 @@ config SOC_SAMA5 config ATMEL_PM bool +config ATMEL_SECURE_PM + bool "Atmel Secure PM support" + depends on SOC_SAMA5D2 && ATMEL_PM + select ARM_PSCI + help + When running under a TEE, the suspend mode must be requested to be set + at TEE level. When enable, this option will use secure monitor calls + to set the suspend level. PSCI is then used to enter suspend. + config SOC_SAMA7 bool select ARM_GIC diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 522b680b6446..0dcc37180588 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o -obj-$(CONFIG_SOC_SAMA5) += sama5.o +obj-$(CONFIG_SOC_SAMA5) += sama5.o sam_secure.o obj-$(CONFIG_SOC_SAMA7) += sama7.o obj-$(CONFIG_SOC_SAMV7) += samv7.o diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 0fd609e26615..b1a43d7bc56c 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -15,6 +15,7 @@ #include <linux/parser.h> #include <linux/suspend.h> +#include <linux/clk.h> #include <linux/clk/at91_pmc.h> #include <linux/platform_data/atmel.h> @@ -27,6 +28,7 @@ #include "generic.h" #include "pm.h" +#include "sam_secure.h" #define BACKUP_DDR_PHY_CALIBRATION (9) @@ -47,8 +49,8 @@ struct at91_pm_bu { unsigned long ddr_phy_calibration[BACKUP_DDR_PHY_CALIBRATION]; }; -/* - * struct at91_pm_sfrbu_offsets: registers mapping for SFRBU +/** + * struct at91_pm_sfrbu_regs - registers mapping for SFRBU * @pswbu: power switch BU control registers */ struct at91_pm_sfrbu_regs { @@ -61,13 +63,64 @@ struct at91_pm_sfrbu_regs { }; /** + * enum at91_pm_eth_clk - Ethernet clock indexes + * @AT91_PM_ETH_PCLK: pclk index + * @AT91_PM_ETH_HCLK: hclk index + * @AT91_PM_ETH_MAX_CLK: max index + */ +enum at91_pm_eth_clk { + AT91_PM_ETH_PCLK, + AT91_PM_ETH_HCLK, + AT91_PM_ETH_MAX_CLK, +}; + +/** + * enum at91_pm_eth - Ethernet controller indexes + * @AT91_PM_G_ETH: gigabit Ethernet controller index + * @AT91_PM_E_ETH: megabit Ethernet controller index + * @AT91_PM_MAX_ETH: max index + */ +enum at91_pm_eth { + AT91_PM_G_ETH, + AT91_PM_E_ETH, + AT91_PM_MAX_ETH, +}; + +/** + * struct at91_pm_quirk_eth - AT91 PM Ethernet quirks + * @dev: Ethernet device + * @np: Ethernet device node + * @clks: Ethernet clocks + * @modes: power management mode that this quirk applies to + * @dns_modes: do not suspend modes: stop suspending if Ethernet is configured + * as wakeup source but buggy and no other wakeup source is + * available + */ +struct at91_pm_quirk_eth { + struct device *dev; + struct device_node *np; + struct clk_bulk_data clks[AT91_PM_ETH_MAX_CLK]; + u32 modes; + u32 dns_modes; +}; + +/** + * struct at91_pm_quirks - AT91 PM quirks + * @eth: Ethernet quirks + */ +struct at91_pm_quirks { + struct at91_pm_quirk_eth eth[AT91_PM_MAX_ETH]; +}; + +/** * struct at91_soc_pm - AT91 SoC power management data structure * @config_shdwc_ws: wakeup sources configuration function for SHDWC * @config_pmc_ws: wakeup srouces configuration function for PMC * @ws_ids: wakup sources of_device_id array + * @bu: backup unit mapped data (for backup mode) + * @quirks: PM quirks * @data: PM data to be used on last phase of suspend * @sfrbu_regs: SFRBU registers mapping - * @bu: backup unit mapped data (for backup mode) * @memcs: memory chip select */ struct at91_soc_pm { @@ -75,19 +128,22 @@ struct at91_soc_pm { int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity); const struct of_device_id *ws_ids; struct at91_pm_bu *bu; + struct at91_pm_quirks quirks; struct at91_pm_data data; struct at91_pm_sfrbu_regs sfrbu_regs; void *memcs; }; /** - * enum at91_pm_iomaps: IOs that needs to be mapped for different PM modes + * enum at91_pm_iomaps - IOs that needs to be mapped for different PM modes * @AT91_PM_IOMAP_SHDWC: SHDWC controller * @AT91_PM_IOMAP_SFRBU: SFRBU controller + * @AT91_PM_IOMAP_ETHC: Ethernet controller */ enum at91_pm_iomaps { AT91_PM_IOMAP_SHDWC, AT91_PM_IOMAP_SFRBU, + AT91_PM_IOMAP_ETHC, }; #define AT91_PM_IOMAP(name) BIT(AT91_PM_IOMAP_##name) @@ -263,6 +319,141 @@ static int at91_sam9x60_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity) return 0; } +static bool at91_pm_eth_quirk_is_valid(struct at91_pm_quirk_eth *eth) +{ + struct platform_device *pdev; + + /* Interface NA in DT. */ + if (!eth->np) + return false; + + /* No quirks for this interface and current suspend mode. */ + if (!(eth->modes & BIT(soc_pm.data.mode))) + return false; + + if (!eth->dev) { + /* Driver not probed. */ + pdev = of_find_device_by_node(eth->np); + if (!pdev) + return false; + eth->dev = &pdev->dev; + } + + /* No quirks if device isn't a wakeup source. */ + if (!device_may_wakeup(eth->dev)) { + put_device(eth->dev); + return false; + } + + /* put_device(eth->dev) is called at the end of suspend. */ + return true; +} + +static int at91_pm_config_quirks(bool suspend) +{ + struct at91_pm_quirk_eth *eth; + int i, j, ret, tmp; + + /* + * Ethernet IPs who's device_node pointers are stored into + * soc_pm.quirks.eth[].np cannot handle WoL packets while in ULP0, ULP1 + * or both due to a hardware bug. If they receive WoL packets while in + * ULP0 or ULP1 IPs could stop working or the whole system could stop + * working. We cannot handle this scenario in the ethernet driver itself + * as the driver is common to multiple vendors and also we only know + * here, in this file, if we suspend to ULP0 or ULP1 mode. Thus handle + * these scenarios here, as quirks. + */ + for (i = 0; i < AT91_PM_MAX_ETH; i++) { + eth = &soc_pm.quirks.eth[i]; + + if (!at91_pm_eth_quirk_is_valid(eth)) + continue; + + /* + * For modes in dns_modes mask the system blocks if quirk is not + * applied but if applied the interface doesn't act at WoL + * events. Thus take care to avoid suspending if this interface + * is the only configured wakeup source. + */ + if (suspend && eth->dns_modes & BIT(soc_pm.data.mode)) { + int ws_count = 0; +#ifdef CONFIG_PM_SLEEP + struct wakeup_source *ws; + + for_each_wakeup_source(ws) { + if (ws->dev == eth->dev) + continue; + + ws_count++; + break; + } +#endif + + /* + * Checking !ws is good for all platforms with issues + * even when both G_ETH and E_ETH are available as dns_modes + * is populated only on G_ETH interface. + */ + if (!ws_count) { + pr_err("AT91: PM: Ethernet cannot resume from WoL!"); + ret = -EPERM; + put_device(eth->dev); + eth->dev = NULL; + /* No need to revert clock settings for this eth. */ + i--; + goto clk_unconfigure; + } + } + + if (suspend) { + clk_bulk_disable_unprepare(AT91_PM_ETH_MAX_CLK, eth->clks); + } else { + ret = clk_bulk_prepare_enable(AT91_PM_ETH_MAX_CLK, + eth->clks); + if (ret) + goto clk_unconfigure; + /* + * Release the reference to eth->dev taken in + * at91_pm_eth_quirk_is_valid(). + */ + put_device(eth->dev); + eth->dev = NULL; + } + } + + return 0; + +clk_unconfigure: + /* + * In case of resume we reach this point if clk_prepare_enable() failed. + * we don't want to revert the previous clk_prepare_enable() for the + * other IP. + */ + for (j = i; j >= 0; j--) { + eth = &soc_pm.quirks.eth[j]; + if (suspend) { + if (!at91_pm_eth_quirk_is_valid(eth)) + continue; + + tmp = clk_bulk_prepare_enable(AT91_PM_ETH_MAX_CLK, eth->clks); + if (tmp) { + pr_err("AT91: PM: failed to enable %s clocks\n", + j == AT91_PM_G_ETH ? "geth" : "eth"); + } + } else { + /* + * Release the reference to eth->dev taken in + * at91_pm_eth_quirk_is_valid(). + */ + put_device(eth->dev); + eth->dev = NULL; + } + } + + return ret; +} + /* * Called after processes are frozen, but before we shutdown devices. */ @@ -427,6 +618,12 @@ static void at91_pm_suspend(suspend_state_t state) */ static int at91_pm_enter(suspend_state_t state) { + int ret; + + ret = at91_pm_config_quirks(true); + if (ret) + return ret; + #ifdef CONFIG_PINCTRL_AT91 /* * FIXME: this is needed to communicate between the pinctrl driver and @@ -464,6 +661,7 @@ error: #ifdef CONFIG_PINCTRL_AT91 at91_pinctrl_gpio_resume(); #endif + at91_pm_config_quirks(false); return 0; } @@ -881,6 +1079,35 @@ securam_fail: return ret; } +static void at91_pm_secure_init(void) +{ + int suspend_mode; + struct arm_smccc_res res; + + suspend_mode = soc_pm.data.suspend_mode; + + res = sam_smccc_call(SAMA5_SMC_SIP_SET_SUSPEND_MODE, + suspend_mode, 0); + if (res.a0 == 0) { + pr_info("AT91: Secure PM: suspend mode set to %s\n", + pm_modes[suspend_mode].pattern); + return; + } + + pr_warn("AT91: Secure PM: %s mode not supported !\n", + pm_modes[suspend_mode].pattern); + + res = sam_smccc_call(SAMA5_SMC_SIP_GET_SUSPEND_MODE, 0, 0); + if (res.a0 == 0) { + pr_warn("AT91: Secure PM: failed to get default mode\n"); + return; + } + + pr_info("AT91: Secure PM: using default suspend mode %s\n", + pm_modes[suspend_mode].pattern); + + soc_pm.data.suspend_mode = res.a1; +} static const struct of_device_id atmel_shdwc_ids[] = { { .compatible = "atmel,sama5d2-shdwc" }, { .compatible = "microchip,sam9x60-shdwc" }, @@ -888,10 +1115,99 @@ static const struct of_device_id atmel_shdwc_ids[] = { { /* sentinel. */ } }; +static const struct of_device_id gmac_ids[] __initconst = { + { .compatible = "atmel,sama5d3-gem" }, + { .compatible = "atmel,sama5d2-gem" }, + { .compatible = "atmel,sama5d29-gem" }, + { .compatible = "microchip,sama7g5-gem" }, + { }, +}; + +static const struct of_device_id emac_ids[] __initconst = { + { .compatible = "atmel,sama5d3-macb" }, + { .compatible = "microchip,sama7g5-emac" }, + { }, +}; + +/* + * Replaces _mode_to_replace with a supported mode that doesn't depend + * on controller pointed by _map_bitmask + * @_maps: u32 array containing AT91_PM_IOMAP() flags and indexed by AT91 + * PM mode + * @_map_bitmask: AT91_PM_IOMAP() bitmask; if _mode_to_replace depends on + * controller represented by _map_bitmask, _mode_to_replace needs to be + * updated + * @_mode_to_replace: standby_mode or suspend_mode that need to be + * updated + * @_mode_to_check: standby_mode or suspend_mode; this is needed here + * to avoid having standby_mode and suspend_mode set with the same AT91 + * PM mode + */ +#define AT91_PM_REPLACE_MODE(_maps, _map_bitmask, _mode_to_replace, \ + _mode_to_check) \ + do { \ + if (((_maps)[(_mode_to_replace)]) & (_map_bitmask)) { \ + int _mode_to_use, _mode_complementary; \ + /* Use ULP0 if it doesn't need _map_bitmask. */ \ + if (!((_maps)[AT91_PM_ULP0] & (_map_bitmask))) {\ + _mode_to_use = AT91_PM_ULP0; \ + _mode_complementary = AT91_PM_STANDBY; \ + } else { \ + _mode_to_use = AT91_PM_STANDBY; \ + _mode_complementary = AT91_PM_STANDBY; \ + } \ + \ + if ((_mode_to_check) != _mode_to_use) \ + (_mode_to_replace) = _mode_to_use; \ + else \ + (_mode_to_replace) = _mode_complementary;\ + } \ + } while (0) + +/* + * Replaces standby and suspend modes with default supported modes: + * ULP0 and STANDBY. + * @_maps: u32 array indexed by AT91 PM mode containing AT91_PM_IOMAP() + * flags + * @_map: controller specific name; standby and suspend mode need to be + * replaced in order to not depend on this controller + */ +#define AT91_PM_REPLACE_MODES(_maps, _map) \ + do { \ + AT91_PM_REPLACE_MODE((_maps), BIT(AT91_PM_IOMAP_##_map),\ + (soc_pm.data.standby_mode), \ + (soc_pm.data.suspend_mode)); \ + AT91_PM_REPLACE_MODE((_maps), BIT(AT91_PM_IOMAP_##_map),\ + (soc_pm.data.suspend_mode), \ + (soc_pm.data.standby_mode)); \ + } while (0) + +static int __init at91_pm_get_eth_clks(struct device_node *np, + struct clk_bulk_data *clks) +{ + clks[AT91_PM_ETH_PCLK].clk = of_clk_get_by_name(np, "pclk"); + if (IS_ERR(clks[AT91_PM_ETH_PCLK].clk)) + return PTR_ERR(clks[AT91_PM_ETH_PCLK].clk); + + clks[AT91_PM_ETH_HCLK].clk = of_clk_get_by_name(np, "hclk"); + if (IS_ERR(clks[AT91_PM_ETH_HCLK].clk)) + return PTR_ERR(clks[AT91_PM_ETH_HCLK].clk); + + return 0; +} + +static int __init at91_pm_eth_clks_empty(struct clk_bulk_data *clks) +{ + return IS_ERR(clks[AT91_PM_ETH_PCLK].clk) || + IS_ERR(clks[AT91_PM_ETH_HCLK].clk); +} + static void __init at91_pm_modes_init(const u32 *maps, int len) { + struct at91_pm_quirk_eth *gmac = &soc_pm.quirks.eth[AT91_PM_G_ETH]; + struct at91_pm_quirk_eth *emac = &soc_pm.quirks.eth[AT91_PM_E_ETH]; struct device_node *np; - int ret, mode; + int ret; ret = at91_pm_backup_init(); if (ret) { @@ -906,17 +1222,7 @@ static void __init at91_pm_modes_init(const u32 *maps, int len) np = of_find_matching_node(NULL, atmel_shdwc_ids); if (!np) { pr_warn("%s: failed to find shdwc!\n", __func__); - - /* Use ULP0 if it doesn't needs SHDWC.*/ - if (!(maps[AT91_PM_ULP0] & AT91_PM_IOMAP(SHDWC))) - mode = AT91_PM_ULP0; - else - mode = AT91_PM_STANDBY; - - if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC)) - soc_pm.data.standby_mode = mode; - if (maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC)) - soc_pm.data.suspend_mode = mode; + AT91_PM_REPLACE_MODES(maps, SHDWC); } else { soc_pm.data.shdwc = of_iomap(np, 0); of_node_put(np); @@ -928,27 +1234,48 @@ static void __init at91_pm_modes_init(const u32 *maps, int len) np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu"); if (!np) { pr_warn("%s: failed to find sfrbu!\n", __func__); - - /* - * Use ULP0 if it doesn't need SHDWC or if SHDWC - * was already located. - */ - if (!(maps[AT91_PM_ULP0] & AT91_PM_IOMAP(SHDWC)) || - soc_pm.data.shdwc) - mode = AT91_PM_ULP0; - else - mode = AT91_PM_STANDBY; - - if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU)) - soc_pm.data.standby_mode = mode; - if (maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU)) - soc_pm.data.suspend_mode = mode; + AT91_PM_REPLACE_MODES(maps, SFRBU); } else { soc_pm.data.sfrbu = of_iomap(np, 0); of_node_put(np); } } + if ((at91_is_pm_mode_active(AT91_PM_ULP1) || + at91_is_pm_mode_active(AT91_PM_ULP0) || + at91_is_pm_mode_active(AT91_PM_ULP0_FAST)) && + (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(ETHC) || + maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(ETHC))) { + np = of_find_matching_node(NULL, gmac_ids); + if (!np) { + np = of_find_matching_node(NULL, emac_ids); + if (np) + goto get_emac_clks; + AT91_PM_REPLACE_MODES(maps, ETHC); + goto unmap_unused_nodes; + } else { + gmac->np = np; + at91_pm_get_eth_clks(np, gmac->clks); + } + + np = of_find_matching_node(NULL, emac_ids); + if (!np) { + if (at91_pm_eth_clks_empty(gmac->clks)) + AT91_PM_REPLACE_MODES(maps, ETHC); + } else { +get_emac_clks: + emac->np = np; + ret = at91_pm_get_eth_clks(np, emac->clks); + if (ret && at91_pm_eth_clks_empty(gmac->clks)) { + of_node_put(gmac->np); + of_node_put(emac->np); + gmac->np = NULL; + emac->np = NULL; + } + } + } + +unmap_unused_nodes: /* Unmap all unnecessary. */ if (soc_pm.data.shdwc && !(maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC) || @@ -1184,17 +1511,30 @@ void __init sama5_pm_init(void) static const int modes[] __initconst = { AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, }; + static const u32 iomaps[] __initconst = { + [AT91_PM_ULP0] = AT91_PM_IOMAP(ETHC), + [AT91_PM_ULP0_FAST] = AT91_PM_IOMAP(ETHC), + }; int ret; if (!IS_ENABLED(CONFIG_SOC_SAMA5)) return; at91_pm_modes_validate(modes, ARRAY_SIZE(modes)); + at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps)); ret = at91_dt_ramc(false); if (ret) return; at91_pm_init(NULL); + + /* Quirks applies to ULP0, ULP0 fast and ULP1 modes. */ + soc_pm.quirks.eth[AT91_PM_G_ETH].modes = BIT(AT91_PM_ULP0) | + BIT(AT91_PM_ULP0_FAST) | + BIT(AT91_PM_ULP1); + /* Do not suspend in ULP0, ULP0 fast if GETH is the only wakeup source. */ + soc_pm.quirks.eth[AT91_PM_G_ETH].dns_modes = BIT(AT91_PM_ULP0) | + BIT(AT91_PM_ULP0_FAST); } void __init sama5d2_pm_init(void) @@ -1204,7 +1544,10 @@ void __init sama5d2_pm_init(void) AT91_PM_BACKUP, }; static const u32 iomaps[] __initconst = { - [AT91_PM_ULP1] = AT91_PM_IOMAP(SHDWC), + [AT91_PM_ULP0] = AT91_PM_IOMAP(ETHC), + [AT91_PM_ULP0_FAST] = AT91_PM_IOMAP(ETHC), + [AT91_PM_ULP1] = AT91_PM_IOMAP(SHDWC) | + AT91_PM_IOMAP(ETHC), [AT91_PM_BACKUP] = AT91_PM_IOMAP(SHDWC) | AT91_PM_IOMAP(SFRBU), }; @@ -1213,6 +1556,12 @@ void __init sama5d2_pm_init(void) if (!IS_ENABLED(CONFIG_SOC_SAMA5D2)) return; + if (IS_ENABLED(CONFIG_ATMEL_SECURE_PM)) { + pr_warn("AT91: Secure PM: ignoring standby mode\n"); + at91_pm_secure_init(); + return; + } + at91_pm_modes_validate(modes, ARRAY_SIZE(modes)); at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps)); ret = at91_dt_ramc(false); @@ -1229,6 +1578,17 @@ void __init sama5d2_pm_init(void) soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0); soc_pm.sfrbu_regs.pswbu.softsw = BIT(1); soc_pm.sfrbu_regs.pswbu.state = BIT(3); + + /* Quirk applies to ULP0, ULP0 fast and ULP1 modes. */ + soc_pm.quirks.eth[AT91_PM_G_ETH].modes = BIT(AT91_PM_ULP0) | + BIT(AT91_PM_ULP0_FAST) | + BIT(AT91_PM_ULP1); + /* + * Do not suspend in ULP0, ULP0 fast if GETH is the only wakeup + * source. + */ + soc_pm.quirks.eth[AT91_PM_G_ETH].dns_modes = BIT(AT91_PM_ULP0) | + BIT(AT91_PM_ULP0_FAST); } void __init sama7_pm_init(void) @@ -1239,7 +1599,8 @@ void __init sama7_pm_init(void) static const u32 iomaps[] __initconst = { [AT91_PM_ULP0] = AT91_PM_IOMAP(SFRBU), [AT91_PM_ULP1] = AT91_PM_IOMAP(SFRBU) | - AT91_PM_IOMAP(SHDWC), + AT91_PM_IOMAP(SHDWC) | + AT91_PM_IOMAP(ETHC), [AT91_PM_BACKUP] = AT91_PM_IOMAP(SFRBU) | AT91_PM_IOMAP(SHDWC), }; @@ -1264,6 +1625,10 @@ void __init sama7_pm_init(void) soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0); soc_pm.sfrbu_regs.pswbu.softsw = BIT(1); soc_pm.sfrbu_regs.pswbu.state = BIT(2); + + /* Quirks applies to ULP1 for both Ethernet interfaces. */ + soc_pm.quirks.eth[AT91_PM_E_ETH].modes = BIT(AT91_PM_ULP1); + soc_pm.quirks.eth[AT91_PM_G_ETH].modes = BIT(AT91_PM_ULP1); } static int __init at91_pm_modes_select(char *str) diff --git a/arch/arm/mach-at91/sam_secure.c b/arch/arm/mach-at91/sam_secure.c new file mode 100644 index 000000000000..2a01f7a7d13f --- /dev/null +++ b/arch/arm/mach-at91/sam_secure.c @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2022, Microchip + */ + +#include <linux/arm-smccc.h> +#include <linux/of.h> + +#include "sam_secure.h" + +static bool optee_available; + +#define SAM_SIP_SMC_STD_CALL_VAL(func_num) \ + ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_32, \ + ARM_SMCCC_OWNER_SIP, (func_num)) + +struct arm_smccc_res sam_smccc_call(u32 fn, u32 arg0, u32 arg1) +{ + struct arm_smccc_res res = {.a0 = -1}; + + if (WARN_ON(!optee_available)) + return res; + + arm_smccc_smc(SAM_SIP_SMC_STD_CALL_VAL(fn), arg0, arg1, 0, 0, 0, 0, 0, + &res); + + return res; +} + +void __init sam_secure_init(void) +{ + struct device_node *np; + + /* + * We only check that the OP-TEE node is present and available. The + * OP-TEE kernel driver is not needed for the type of interaction made + * with OP-TEE here so the driver's status is not checked. + */ + np = of_find_node_by_path("/firmware/optee"); + if (np && of_device_is_available(np)) + optee_available = true; + of_node_put(np); + + if (optee_available) + pr_info("Running under OP-TEE firmware\n"); +} diff --git a/arch/arm/mach-at91/sam_secure.h b/arch/arm/mach-at91/sam_secure.h new file mode 100644 index 000000000000..1e7d8b20ba1e --- /dev/null +++ b/arch/arm/mach-at91/sam_secure.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2022, Microchip + */ + +#ifndef SAM_SECURE_H +#define SAM_SECURE_H + +#include <linux/arm-smccc.h> + +/* Secure Monitor mode APIs */ +#define SAMA5_SMC_SIP_SET_SUSPEND_MODE 0x400 +#define SAMA5_SMC_SIP_GET_SUSPEND_MODE 0x401 + +void __init sam_secure_init(void); +struct arm_smccc_res sam_smccc_call(u32 fn, u32 arg0, u32 arg1); + +#endif /* SAM_SECURE_H */ diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c index 89dab7cf01e8..de5dd28b392e 100644 --- a/arch/arm/mach-at91/sama5.c +++ b/arch/arm/mach-at91/sama5.c @@ -14,6 +14,7 @@ #include <asm/system_misc.h> #include "generic.h" +#include "sam_secure.h" static void __init sama5_dt_device_init(void) { @@ -47,6 +48,7 @@ MACHINE_END static void __init sama5d2_init(void) { of_platform_default_populate(NULL, NULL, NULL); + sam_secure_init(); sama5d2_pm_init(); } diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 8db655c3e321..f73a056bf560 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -218,4 +218,16 @@ config ARCH_BRCMSTB This enables support for Broadcom ARM-based set-top box chipsets, including the 7445 family of chips. +config ARCH_BCMBCA + bool "Broadcom Broadband SoC" + depends on ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select HAVE_ARM_ARCH_TIMER + help + Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based + BCA chipset. + + This enables support for Broadcom BCA ARM-based broadband chipsets, + including the DSL, PON and Wireless family of chips. endif diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c index 4555f21e7077..9b457714a41c 100644 --- a/arch/arm/mach-bcm/platsmp-brcmstb.c +++ b/arch/arm/mach-bcm/platsmp-brcmstb.c @@ -59,7 +59,7 @@ static u32 hif_cont_reg; /* * We must quiesce a dying CPU before it can be killed by the boot CPU. Because * one or more cache may be disabled, we must flush to ensure coherency. We - * cannot use traditionl completion structures or spinlocks as they rely on + * cannot use traditional completion structures or spinlocks as they rely on * coherency. */ static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state); diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index 314de9477b84..fd32e576ecd0 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -2,6 +2,7 @@ menuconfig ARCH_CLPS711X bool "Cirrus Logic EP721x/EP731x-based" depends on ARCH_MULTI_V4T + depends on CPU_LITTLE_ENDIAN select CLPS711X_TIMER select CPU_ARM720T select GPIOLIB diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 1d3aef84287d..008cbc2ab867 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -3,6 +3,7 @@ menuconfig ARCH_DAVINCI bool "TI DaVinci" depends on ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN select DAVINCI_TIMER select ZONE_DMA select PM_GENERIC_DOMAINS if PM diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 58838a9de651..b04c084b707e 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -3,9 +3,7 @@ # Makefile for the linux kernel. # # - -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include - +# # Common objects obj-y := serial.o usb.o common.o sram.o diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 823c9cc98f18..a0aaab5c7aa6 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -36,10 +36,9 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/common.h> -#include <mach/mux.h> -#include <mach/da8xx.h> - +#include "common.h" +#include "mux.h" +#include "da8xx.h" #include "irqs.h" #define DA830_EVM_PHY_ID "" @@ -473,11 +472,10 @@ static int __init da830_evm_ui_expander_setup(struct i2c_client *client, return 0; } -static int da830_evm_ui_expander_teardown(struct i2c_client *client, int gpio, +static void da830_evm_ui_expander_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *context) { gpio_free(gpio + 6); - return 0; } static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = { diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 428012687a80..efc26b472ef8 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -43,10 +43,9 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#include <mach/common.h> -#include <mach/da8xx.h> -#include <mach/mux.h> - +#include "common.h" +#include "da8xx.h" +#include "mux.h" #include "irqs.h" #include "sram.h" @@ -1101,11 +1100,13 @@ static int __init da850_evm_config_emac(void) int ret; u32 val; struct davinci_soc_info *soc_info = &davinci_soc_info; - u8 rmii_en = soc_info->emac_pdata->rmii_en; + u8 rmii_en; if (!machine_is_davinci_da850_evm()) return 0; + rmii_en = soc_info->emac_pdata->rmii_en; + cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG); val = __raw_readl(cfg_chip3_base); diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 3c5a9e3c128a..f7c56f662d4c 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -33,9 +33,8 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/serial.h> -#include <mach/common.h> - +#include "serial.h" +#include "common.h" #include "davinci.h" /* NOTE: this is geared for the standard config, with a socketed diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index e475b2113e70..0f2b61266197 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -27,9 +27,8 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/common.h> -#include <mach/serial.h> - +#include "common.h" +#include "serial.h" #include "davinci.h" /* NOTE: this is geared for the standard config, with a socketed diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index b3bef74c982a..9adcb5879d14 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -36,10 +36,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/mux.h> -#include <mach/common.h> #include <linux/platform_data/i2c-davinci.h> -#include <mach/serial.h> #include <linux/platform_data/mmc-davinci.h> #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/keyscan-davinci.h> @@ -47,6 +44,9 @@ #include <media/i2c/ths7303.h> #include <media/i2c/tvp514x.h> +#include "mux.h" +#include "common.h" +#include "serial.h" #include "davinci.h" static inline int have_imager(void) diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index cce3a621eb20..9f405af36a6f 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -37,10 +37,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/common.h> -#include <mach/mux.h> -#include <mach/serial.h> - #include <linux/platform_data/i2c-davinci.h> #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/mmc-davinci.h> @@ -49,6 +45,9 @@ #include <linux/platform_data/ti-aemif.h> #include "davinci.h" +#include "common.h" +#include "mux.h" +#include "serial.h" #include "irqs.h" #define DM644X_EVM_PHY_ID "davinci_mdio-0:01" @@ -366,14 +365,13 @@ evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) return status; } -static int +static void evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) { if (evm_led_dev) { platform_device_unregister(evm_led_dev); evm_led_dev = NULL; } - return 0; } static struct pcf857x_platform_data pcf_data_u2 = { @@ -428,7 +426,7 @@ evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) return 0; } -static int +static void evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) { gpio_free(gpio + 1); @@ -439,7 +437,6 @@ evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) device_remove_file(&client->dev, &dev_attr_user_sw); gpio_free(sw_gpio); } - return 0; } static struct pcf857x_platform_data pcf_data_u18 = { @@ -488,7 +485,7 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) return 0; } -static int +static void evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) { gpio_free(gpio + 7); @@ -498,7 +495,6 @@ evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) gpio_free(gpio + 2); gpio_free(gpio + 1); gpio_free(gpio + 0); - return 0; } static struct pcf857x_platform_data pcf_data_u35 = { diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index ee91d81ebbfd..84ad065e98c2 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -43,9 +43,8 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/common.h> -#include <mach/serial.h> - +#include "common.h" +#include "serial.h" #include "davinci.h" #include "irqs.h" @@ -315,15 +314,13 @@ static int evm_pcf_setup(struct i2c_client *client, int gpio, return evm_led_setup(client, gpio+4, 4, c); } -static int evm_pcf_teardown(struct i2c_client *client, int gpio, +static void evm_pcf_teardown(struct i2c_client *client, int gpio, unsigned int ngpio, void *c) { BUG_ON(ngpio < 8); evm_sw_teardown(client, gpio, 4, c); evm_led_teardown(client, gpio+4, 4, c); - - return 0; } static struct pcf857x_platform_data pcf_data = { diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 2127969beb96..3f084bdb9bc5 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -28,12 +28,14 @@ #include <asm/io.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/common.h> -#include <mach/da8xx.h> + +#include "common.h" +#include "da8xx.h" +#include "mux.h" + #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/mtd-davinci-aemif.h> #include <linux/platform_data/ti-aemif.h> -#include <mach/mux.h> #include <linux/platform_data/spi-davinci.h> #define MITYOMAPL138_PHY_ID "" diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index b4843f68bb57..94be492b8a9e 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -36,10 +36,9 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/common.h> -#include <mach/serial.h> -#include <mach/mux.h> - +#include "common.h" +#include "serial.h" +#include "mux.h" #include "davinci.h" #define NEUROS_OSD2_PHY_ID "davinci_mdio-0:01" diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 88df8011a4e6..20f71856bf7e 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -27,9 +27,9 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/common.h> -#include <mach/da8xx.h> -#include <mach/mux.h> +#include "common.h" +#include "da8xx.h" +#include "mux.h" #define HAWKBOARD_PHY_ID "davinci_mdio-0:07" diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 6930b2f485d1..e87fd8f82d89 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -22,12 +22,12 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <mach/common.h> #include <linux/platform_data/i2c-davinci.h> -#include <mach/serial.h> -#include <mach/mux.h> #include <linux/platform_data/usb-davinci.h> +#include "common.h" +#include "serial.h" +#include "mux.h" #include "davinci.h" #define SFFSDR_PHY_ID "davinci_mdio-0:01" diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index ae61d19f9b3a..0a6f826ff136 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -17,8 +17,8 @@ #include <asm/tlb.h> #include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/cputype.h> +#include "common.h" +#include "cputype.h" struct davinci_soc_info davinci_soc_info; EXPORT_SYMBOL(davinci_soc_info); diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/common.h index 139b83de011d..139b83de011d 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/common.h diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/cputype.h index 1fc84e21664d..1fe9f84d5ee6 100644 --- a/arch/arm/mach-davinci/include/mach/cputype.h +++ b/arch/arm/mach-davinci/cputype.h @@ -16,7 +16,7 @@ #ifndef _ASM_ARCH_CPU_H #define _ASM_ARCH_CPU_H -#include <mach/common.h> +#include "common.h" struct davinci_id { u8 variant; /* JTAG ID bits 31:28 */ diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 018ab4b549f1..1b86657c6e9d 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -16,14 +16,13 @@ #include <linux/irqchip/irq-davinci-cp-intc.h> #include <linux/platform_data/gpio-davinci.h> -#include <asm/mach/map.h> - -#include <mach/common.h> -#include <mach/cputype.h> -#include <mach/da8xx.h> - #include <clocksource/timer-davinci.h> +#include <asm/mach/map.h> + +#include "common.h" +#include "cputype.h" +#include "da8xx.h" #include "irqs.h" #include "mux.h" diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 68156e7239a6..cd514c136de0 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -28,16 +28,14 @@ #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> +#include <clocksource/timer-davinci.h> #include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/cputype.h> -#include <mach/da8xx.h> -#include <mach/pm.h> - -#include <clocksource/timer-davinci.h> - +#include "common.h" +#include "cputype.h" +#include "da8xx.h" +#include "pm.h" #include "irqs.h" #include "mux.h" diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index 0cd2f30aeb9c..45763a9b37ee 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -7,8 +7,8 @@ #include <asm/mach/arch.h> -#include <mach/common.h> -#include <mach/da8xx.h> +#include "common.h" +#include "da8xx.h" #ifdef CONFIG_ARCH_DAVINCI_DA850 diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/da8xx.h index 1618b30661a9..699df08714ba 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/da8xx.h @@ -21,8 +21,9 @@ #include <linux/regmap.h> #include <linux/videodev2.h> -#include <mach/serial.h> -#include <mach/pm.h> +#include "serial.h" +#include "pm.h" + #include <linux/platform_data/edma.h> #include <linux/platform_data/i2c-davinci.h> #include <linux/platform_data/mmc-davinci.h> diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index 208d7a4d3597..e895eaf9c7cc 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -25,7 +25,8 @@ #include <linux/platform_data/davinci_asp.h> #include <linux/platform_data/edma.h> #include <linux/platform_data/keyscan-davinci.h> -#include <mach/hardware.h> + +#include "hardware.h" #include <media/davinci/vpfe_capture.h> #include <media/davinci/vpif_types.h> diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index bb368938fc49..ef9593558e5f 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -18,10 +18,9 @@ #include <linux/reboot.h> #include <linux/serial_8250.h> -#include <mach/common.h> -#include <mach/cputype.h> -#include <mach/da8xx.h> - +#include "common.h" +#include "cputype.h" +#include "da8xx.h" #include "asp.h" #include "cpuidle.h" #include "irqs.h" diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 849e811fade7..199c26d9a2b6 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -14,10 +14,9 @@ #include <linux/io.h> #include <linux/reboot.h> -#include <mach/hardware.h> -#include <mach/cputype.h> -#include <mach/mux.h> - +#include "hardware.h" +#include "cputype.h" +#include "mux.h" #include "davinci.h" #include "irqs.h" diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 5de72d2fa8f0..1d7443c59b14 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -24,15 +24,13 @@ #include <linux/serial_8250.h> #include <linux/spi/spi.h> -#include <asm/mach/map.h> - -#include <mach/common.h> -#include <mach/cputype.h> -#include <mach/mux.h> -#include <mach/serial.h> - #include <clocksource/timer-davinci.h> +#include <asm/mach/map.h> + +#include "common.h" +#include "cputype.h" +#include "serial.h" #include "asp.h" #include "davinci.h" #include "irqs.h" diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index c1e0d46996e4..73ccc916f60a 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -29,15 +29,13 @@ #include <linux/serial_8250.h> #include <linux/spi/spi.h> -#include <asm/mach/map.h> - -#include <mach/common.h> -#include <mach/cputype.h> -#include <mach/mux.h> -#include <mach/serial.h> - #include <clocksource/timer-davinci.h> +#include <asm/mach/map.h> + +#include "common.h" +#include "cputype.h" +#include "serial.h" #include "asp.h" #include "davinci.h" #include "irqs.h" diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 24988939ae46..1ce48d0fb16d 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -21,15 +21,13 @@ #include <linux/platform_device.h> #include <linux/serial_8250.h> -#include <asm/mach/map.h> - -#include <mach/common.h> -#include <mach/cputype.h> -#include <mach/mux.h> -#include <mach/serial.h> - #include <clocksource/timer-davinci.h> +#include <asm/mach/map.h> + +#include "common.h" +#include "cputype.h" +#include "serial.h" #include "asp.h" #include "davinci.h" #include "irqs.h" diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 4ffd028ed997..971b2d4e2595 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -22,15 +22,13 @@ #include <linux/platform_device.h> #include <linux/serial_8250.h> -#include <asm/mach/map.h> - -#include <mach/common.h> -#include <mach/cputype.h> -#include <mach/mux.h> -#include <mach/serial.h> - #include <clocksource/timer-davinci.h> +#include <asm/mach/map.h> + +#include "common.h" +#include "cputype.h" +#include "serial.h" #include "asp.h" #include "davinci.h" #include "irqs.h" diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/hardware.h index 16bb42291d39..16bb42291d39 100644 --- a/arch/arm/mach-davinci/include/mach/hardware.h +++ b/arch/arm/mach-davinci/hardware.h diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h deleted file mode 100644 index 631655e68ae0..000000000000 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ /dev/null @@ -1,990 +0,0 @@ -/* - * Table of the DAVINCI register configurations for the PINMUX combinations - * - * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com> - * - * Based on linux/include/asm-arm/arch-omap/mux.h: - * Copyright (C) 2003 - 2005 Nokia Corporation - * - * Written by Tony Lindgren - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Copyright (C) 2008 Texas Instruments. - */ - -#ifndef __INC_MACH_MUX_H -#define __INC_MACH_MUX_H - -struct mux_config { - const char *name; - const char *mux_reg_name; - const unsigned char mux_reg; - const unsigned char mask_offset; - const unsigned char mask; - const unsigned char mode; - bool debug; -}; - -enum davinci_dm644x_index { - /* ATA and HDDIR functions */ - DM644X_HDIREN, - DM644X_ATAEN, - DM644X_ATAEN_DISABLE, - - /* HPI functions */ - DM644X_HPIEN_DISABLE, - - /* AEAW functions */ - DM644X_AEAW, - DM644X_AEAW0, - DM644X_AEAW1, - DM644X_AEAW2, - DM644X_AEAW3, - DM644X_AEAW4, - - /* Memory Stick */ - DM644X_MSTK, - - /* I2C */ - DM644X_I2C, - - /* ASP function */ - DM644X_MCBSP, - - /* UART1 */ - DM644X_UART1, - - /* UART2 */ - DM644X_UART2, - - /* PWM0 */ - DM644X_PWM0, - - /* PWM1 */ - DM644X_PWM1, - - /* PWM2 */ - DM644X_PWM2, - - /* VLYNQ function */ - DM644X_VLYNQEN, - DM644X_VLSCREN, - DM644X_VLYNQWD, - - /* EMAC and MDIO function */ - DM644X_EMACEN, - - /* GPIO3V[0:16] pins */ - DM644X_GPIO3V, - - /* GPIO pins */ - DM644X_GPIO0, - DM644X_GPIO3, - DM644X_GPIO43_44, - DM644X_GPIO46_47, - - /* VPBE */ - DM644X_RGB666, - - /* LCD */ - DM644X_LOEEN, - DM644X_LFLDEN, -}; - -enum davinci_dm646x_index { - /* ATA function */ - DM646X_ATAEN, - - /* AUDIO Clock */ - DM646X_AUDCK1, - DM646X_AUDCK0, - - /* CRGEN Control */ - DM646X_CRGMUX, - - /* VPIF Control */ - DM646X_STSOMUX_DISABLE, - DM646X_STSIMUX_DISABLE, - DM646X_PTSOMUX_DISABLE, - DM646X_PTSIMUX_DISABLE, - - /* TSIF Control */ - DM646X_STSOMUX, - DM646X_STSIMUX, - DM646X_PTSOMUX_PARALLEL, - DM646X_PTSIMUX_PARALLEL, - DM646X_PTSOMUX_SERIAL, - DM646X_PTSIMUX_SERIAL, -}; - -enum davinci_dm355_index { - /* MMC/SD 0 */ - DM355_MMCSD0, - - /* MMC/SD 1 */ - DM355_SD1_CLK, - DM355_SD1_CMD, - DM355_SD1_DATA3, - DM355_SD1_DATA2, - DM355_SD1_DATA1, - DM355_SD1_DATA0, - - /* I2C */ - DM355_I2C_SDA, - DM355_I2C_SCL, - - /* ASP0 function */ - DM355_MCBSP0_BDX, - DM355_MCBSP0_X, - DM355_MCBSP0_BFSX, - DM355_MCBSP0_BDR, - DM355_MCBSP0_R, - DM355_MCBSP0_BFSR, - - /* SPI0 */ - DM355_SPI0_SDI, - DM355_SPI0_SDENA0, - DM355_SPI0_SDENA1, - - /* IRQ muxing */ - DM355_INT_EDMA_CC, - DM355_INT_EDMA_TC0_ERR, - DM355_INT_EDMA_TC1_ERR, - - /* EDMA event muxing */ - DM355_EVT8_ASP1_TX, - DM355_EVT9_ASP1_RX, - DM355_EVT26_MMC0_RX, - - /* Video Out */ - DM355_VOUT_FIELD, - DM355_VOUT_FIELD_G70, - DM355_VOUT_HVSYNC, - DM355_VOUT_COUTL_EN, - DM355_VOUT_COUTH_EN, - - /* Video In Pin Mux */ - DM355_VIN_PCLK, - DM355_VIN_CAM_WEN, - DM355_VIN_CAM_VD, - DM355_VIN_CAM_HD, - DM355_VIN_YIN_EN, - DM355_VIN_CINL_EN, - DM355_VIN_CINH_EN, -}; - -enum davinci_dm365_index { - /* MMC/SD 0 */ - DM365_MMCSD0, - - /* MMC/SD 1 */ - DM365_SD1_CLK, - DM365_SD1_CMD, - DM365_SD1_DATA3, - DM365_SD1_DATA2, - DM365_SD1_DATA1, - DM365_SD1_DATA0, - - /* I2C */ - DM365_I2C_SDA, - DM365_I2C_SCL, - - /* AEMIF */ - DM365_AEMIF_AR_A14, - DM365_AEMIF_AR_BA0, - DM365_AEMIF_A3, - DM365_AEMIF_A7, - DM365_AEMIF_D15_8, - DM365_AEMIF_CE0, - DM365_AEMIF_CE1, - DM365_AEMIF_WE_OE, - - /* ASP0 function */ - DM365_MCBSP0_BDX, - DM365_MCBSP0_X, - DM365_MCBSP0_BFSX, - DM365_MCBSP0_BDR, - DM365_MCBSP0_R, - DM365_MCBSP0_BFSR, - - /* SPI0 */ - DM365_SPI0_SCLK, - DM365_SPI0_SDI, - DM365_SPI0_SDO, - DM365_SPI0_SDENA0, - DM365_SPI0_SDENA1, - - /* UART */ - DM365_UART0_RXD, - DM365_UART0_TXD, - DM365_UART1_RXD, - DM365_UART1_TXD, - DM365_UART1_RTS, - DM365_UART1_CTS, - - /* EMAC */ - DM365_EMAC_TX_EN, - DM365_EMAC_TX_CLK, - DM365_EMAC_COL, - DM365_EMAC_TXD3, - DM365_EMAC_TXD2, - DM365_EMAC_TXD1, - DM365_EMAC_TXD0, - DM365_EMAC_RXD3, - DM365_EMAC_RXD2, - DM365_EMAC_RXD1, - DM365_EMAC_RXD0, - DM365_EMAC_RX_CLK, - DM365_EMAC_RX_DV, - DM365_EMAC_RX_ER, - DM365_EMAC_CRS, - DM365_EMAC_MDIO, - DM365_EMAC_MDCLK, - - /* Key Scan */ - DM365_KEYSCAN, - - /* PWM */ - DM365_PWM0, - DM365_PWM0_G23, - DM365_PWM1, - DM365_PWM1_G25, - DM365_PWM2_G87, - DM365_PWM2_G88, - DM365_PWM2_G89, - DM365_PWM2_G90, - DM365_PWM3_G80, - DM365_PWM3_G81, - DM365_PWM3_G85, - DM365_PWM3_G86, - - /* SPI1 */ - DM365_SPI1_SCLK, - DM365_SPI1_SDO, - DM365_SPI1_SDI, - DM365_SPI1_SDENA0, - DM365_SPI1_SDENA1, - - /* SPI2 */ - DM365_SPI2_SCLK, - DM365_SPI2_SDO, - DM365_SPI2_SDI, - DM365_SPI2_SDENA0, - DM365_SPI2_SDENA1, - - /* SPI3 */ - DM365_SPI3_SCLK, - DM365_SPI3_SDO, - DM365_SPI3_SDI, - DM365_SPI3_SDENA0, - DM365_SPI3_SDENA1, - - /* SPI4 */ - DM365_SPI4_SCLK, - DM365_SPI4_SDO, - DM365_SPI4_SDI, - DM365_SPI4_SDENA0, - DM365_SPI4_SDENA1, - - /* Clock */ - DM365_CLKOUT0, - DM365_CLKOUT1, - DM365_CLKOUT2, - - /* GPIO */ - DM365_GPIO20, - DM365_GPIO30, - DM365_GPIO31, - DM365_GPIO32, - DM365_GPIO33, - DM365_GPIO40, - DM365_GPIO64_57, - - /* Video */ - DM365_VOUT_FIELD, - DM365_VOUT_FIELD_G81, - DM365_VOUT_HVSYNC, - DM365_VOUT_COUTL_EN, - DM365_VOUT_COUTH_EN, - DM365_VIN_CAM_WEN, - DM365_VIN_CAM_VD, - DM365_VIN_CAM_HD, - DM365_VIN_YIN4_7_EN, - DM365_VIN_YIN0_3_EN, - - /* IRQ muxing */ - DM365_INT_EDMA_CC, - DM365_INT_EDMA_TC0_ERR, - DM365_INT_EDMA_TC1_ERR, - DM365_INT_EDMA_TC2_ERR, - DM365_INT_EDMA_TC3_ERR, - DM365_INT_PRTCSS, - DM365_INT_EMAC_RXTHRESH, - DM365_INT_EMAC_RXPULSE, - DM365_INT_EMAC_TXPULSE, - DM365_INT_EMAC_MISCPULSE, - DM365_INT_IMX0_ENABLE, - DM365_INT_IMX0_DISABLE, - DM365_INT_HDVICP_ENABLE, - DM365_INT_HDVICP_DISABLE, - DM365_INT_IMX1_ENABLE, - DM365_INT_IMX1_DISABLE, - DM365_INT_NSF_ENABLE, - DM365_INT_NSF_DISABLE, - - /* EDMA event muxing */ - DM365_EVT2_ASP_TX, - DM365_EVT3_ASP_RX, - DM365_EVT2_VC_TX, - DM365_EVT3_VC_RX, - DM365_EVT26_MMC0_RX, -}; - -enum da830_index { - DA830_GPIO7_14, - DA830_RTCK, - DA830_GPIO7_15, - DA830_EMU_0, - DA830_EMB_SDCKE, - DA830_EMB_CLK_GLUE, - DA830_EMB_CLK, - DA830_NEMB_CS_0, - DA830_NEMB_CAS, - DA830_NEMB_RAS, - DA830_NEMB_WE, - DA830_EMB_BA_1, - DA830_EMB_BA_0, - DA830_EMB_A_0, - DA830_EMB_A_1, - DA830_EMB_A_2, - DA830_EMB_A_3, - DA830_EMB_A_4, - DA830_EMB_A_5, - DA830_GPIO7_0, - DA830_GPIO7_1, - DA830_GPIO7_2, - DA830_GPIO7_3, - DA830_GPIO7_4, - DA830_GPIO7_5, - DA830_GPIO7_6, - DA830_GPIO7_7, - DA830_EMB_A_6, - DA830_EMB_A_7, - DA830_EMB_A_8, - DA830_EMB_A_9, - DA830_EMB_A_10, - DA830_EMB_A_11, - DA830_EMB_A_12, - DA830_EMB_D_31, - DA830_GPIO7_8, - DA830_GPIO7_9, - DA830_GPIO7_10, - DA830_GPIO7_11, - DA830_GPIO7_12, - DA830_GPIO7_13, - DA830_GPIO3_13, - DA830_EMB_D_30, - DA830_EMB_D_29, - DA830_EMB_D_28, - DA830_EMB_D_27, - DA830_EMB_D_26, - DA830_EMB_D_25, - DA830_EMB_D_24, - DA830_EMB_D_23, - DA830_EMB_D_22, - DA830_EMB_D_21, - DA830_EMB_D_20, - DA830_EMB_D_19, - DA830_EMB_D_18, - DA830_EMB_D_17, - DA830_EMB_D_16, - DA830_NEMB_WE_DQM_3, - DA830_NEMB_WE_DQM_2, - DA830_EMB_D_0, - DA830_EMB_D_1, - DA830_EMB_D_2, - DA830_EMB_D_3, - DA830_EMB_D_4, - DA830_EMB_D_5, - DA830_EMB_D_6, - DA830_GPIO6_0, - DA830_GPIO6_1, - DA830_GPIO6_2, - DA830_GPIO6_3, - DA830_GPIO6_4, - DA830_GPIO6_5, - DA830_GPIO6_6, - DA830_EMB_D_7, - DA830_EMB_D_8, - DA830_EMB_D_9, - DA830_EMB_D_10, - DA830_EMB_D_11, - DA830_EMB_D_12, - DA830_EMB_D_13, - DA830_EMB_D_14, - DA830_GPIO6_7, - DA830_GPIO6_8, - DA830_GPIO6_9, - DA830_GPIO6_10, - DA830_GPIO6_11, - DA830_GPIO6_12, - DA830_GPIO6_13, - DA830_GPIO6_14, - DA830_EMB_D_15, - DA830_NEMB_WE_DQM_1, - DA830_NEMB_WE_DQM_0, - DA830_SPI0_SOMI_0, - DA830_SPI0_SIMO_0, - DA830_SPI0_CLK, - DA830_NSPI0_ENA, - DA830_NSPI0_SCS_0, - DA830_EQEP0I, - DA830_EQEP0S, - DA830_EQEP1I, - DA830_NUART0_CTS, - DA830_NUART0_RTS, - DA830_EQEP0A, - DA830_EQEP0B, - DA830_GPIO6_15, - DA830_GPIO5_14, - DA830_GPIO5_15, - DA830_GPIO5_0, - DA830_GPIO5_1, - DA830_GPIO5_2, - DA830_GPIO5_3, - DA830_GPIO5_4, - DA830_SPI1_SOMI_0, - DA830_SPI1_SIMO_0, - DA830_SPI1_CLK, - DA830_UART0_RXD, - DA830_UART0_TXD, - DA830_AXR1_10, - DA830_AXR1_11, - DA830_NSPI1_ENA, - DA830_I2C1_SCL, - DA830_I2C1_SDA, - DA830_EQEP1S, - DA830_I2C0_SDA, - DA830_I2C0_SCL, - DA830_UART2_RXD, - DA830_TM64P0_IN12, - DA830_TM64P0_OUT12, - DA830_GPIO5_5, - DA830_GPIO5_6, - DA830_GPIO5_7, - DA830_GPIO5_8, - DA830_GPIO5_9, - DA830_GPIO5_10, - DA830_GPIO5_11, - DA830_GPIO5_12, - DA830_NSPI1_SCS_0, - DA830_USB0_DRVVBUS, - DA830_AHCLKX0, - DA830_ACLKX0, - DA830_AFSX0, - DA830_AHCLKR0, - DA830_ACLKR0, - DA830_AFSR0, - DA830_UART2_TXD, - DA830_AHCLKX2, - DA830_ECAP0_APWM0, - DA830_RMII_MHZ_50_CLK, - DA830_ECAP1_APWM1, - DA830_USB_REFCLKIN, - DA830_GPIO5_13, - DA830_GPIO4_15, - DA830_GPIO2_11, - DA830_GPIO2_12, - DA830_GPIO2_13, - DA830_GPIO2_14, - DA830_GPIO2_15, - DA830_GPIO3_12, - DA830_AMUTE0, - DA830_AXR0_0, - DA830_AXR0_1, - DA830_AXR0_2, - DA830_AXR0_3, - DA830_AXR0_4, - DA830_AXR0_5, - DA830_AXR0_6, - DA830_RMII_TXD_0, - DA830_RMII_TXD_1, - DA830_RMII_TXEN, - DA830_RMII_CRS_DV, - DA830_RMII_RXD_0, - DA830_RMII_RXD_1, - DA830_RMII_RXER, - DA830_AFSR2, - DA830_ACLKX2, - DA830_AXR2_3, - DA830_AXR2_2, - DA830_AXR2_1, - DA830_AFSX2, - DA830_ACLKR2, - DA830_NRESETOUT, - DA830_GPIO3_0, - DA830_GPIO3_1, - DA830_GPIO3_2, - DA830_GPIO3_3, - DA830_GPIO3_4, - DA830_GPIO3_5, - DA830_GPIO3_6, - DA830_AXR0_7, - DA830_AXR0_8, - DA830_UART1_RXD, - DA830_UART1_TXD, - DA830_AXR0_11, - DA830_AHCLKX1, - DA830_ACLKX1, - DA830_AFSX1, - DA830_MDIO_CLK, - DA830_MDIO_D, - DA830_AXR0_9, - DA830_AXR0_10, - DA830_EPWM0B, - DA830_EPWM0A, - DA830_EPWMSYNCI, - DA830_AXR2_0, - DA830_EPWMSYNC0, - DA830_GPIO3_7, - DA830_GPIO3_8, - DA830_GPIO3_9, - DA830_GPIO3_10, - DA830_GPIO3_11, - DA830_GPIO3_14, - DA830_GPIO3_15, - DA830_GPIO4_10, - DA830_AHCLKR1, - DA830_ACLKR1, - DA830_AFSR1, - DA830_AMUTE1, - DA830_AXR1_0, - DA830_AXR1_1, - DA830_AXR1_2, - DA830_AXR1_3, - DA830_ECAP2_APWM2, - DA830_EHRPWMGLUETZ, - DA830_EQEP1A, - DA830_GPIO4_11, - DA830_GPIO4_12, - DA830_GPIO4_13, - DA830_GPIO4_14, - DA830_GPIO4_0, - DA830_GPIO4_1, - DA830_GPIO4_2, - DA830_GPIO4_3, - DA830_AXR1_4, - DA830_AXR1_5, - DA830_AXR1_6, - DA830_AXR1_7, - DA830_AXR1_8, - DA830_AXR1_9, - DA830_EMA_D_0, - DA830_EMA_D_1, - DA830_EQEP1B, - DA830_EPWM2B, - DA830_EPWM2A, - DA830_EPWM1B, - DA830_EPWM1A, - DA830_MMCSD_DAT_0, - DA830_MMCSD_DAT_1, - DA830_UHPI_HD_0, - DA830_UHPI_HD_1, - DA830_GPIO4_4, - DA830_GPIO4_5, - DA830_GPIO4_6, - DA830_GPIO4_7, - DA830_GPIO4_8, - DA830_GPIO4_9, - DA830_GPIO0_0, - DA830_GPIO0_1, - DA830_EMA_D_2, - DA830_EMA_D_3, - DA830_EMA_D_4, - DA830_EMA_D_5, - DA830_EMA_D_6, - DA830_EMA_D_7, - DA830_EMA_D_8, - DA830_EMA_D_9, - DA830_MMCSD_DAT_2, - DA830_MMCSD_DAT_3, - DA830_MMCSD_DAT_4, - DA830_MMCSD_DAT_5, - DA830_MMCSD_DAT_6, - DA830_MMCSD_DAT_7, - DA830_UHPI_HD_8, - DA830_UHPI_HD_9, - DA830_UHPI_HD_2, - DA830_UHPI_HD_3, - DA830_UHPI_HD_4, - DA830_UHPI_HD_5, - DA830_UHPI_HD_6, - DA830_UHPI_HD_7, - DA830_LCD_D_8, - DA830_LCD_D_9, - DA830_GPIO0_2, - DA830_GPIO0_3, - DA830_GPIO0_4, - DA830_GPIO0_5, - DA830_GPIO0_6, - DA830_GPIO0_7, - DA830_GPIO0_8, - DA830_GPIO0_9, - DA830_EMA_D_10, - DA830_EMA_D_11, - DA830_EMA_D_12, - DA830_EMA_D_13, - DA830_EMA_D_14, - DA830_EMA_D_15, - DA830_EMA_A_0, - DA830_EMA_A_1, - DA830_UHPI_HD_10, - DA830_UHPI_HD_11, - DA830_UHPI_HD_12, - DA830_UHPI_HD_13, - DA830_UHPI_HD_14, - DA830_UHPI_HD_15, - DA830_LCD_D_7, - DA830_MMCSD_CLK, - DA830_LCD_D_10, - DA830_LCD_D_11, - DA830_LCD_D_12, - DA830_LCD_D_13, - DA830_LCD_D_14, - DA830_LCD_D_15, - DA830_UHPI_HCNTL0, - DA830_GPIO0_10, - DA830_GPIO0_11, - DA830_GPIO0_12, - DA830_GPIO0_13, - DA830_GPIO0_14, - DA830_GPIO0_15, - DA830_GPIO1_0, - DA830_GPIO1_1, - DA830_EMA_A_2, - DA830_EMA_A_3, - DA830_EMA_A_4, - DA830_EMA_A_5, - DA830_EMA_A_6, - DA830_EMA_A_7, - DA830_EMA_A_8, - DA830_EMA_A_9, - DA830_MMCSD_CMD, - DA830_LCD_D_6, - DA830_LCD_D_3, - DA830_LCD_D_2, - DA830_LCD_D_1, - DA830_LCD_D_0, - DA830_LCD_PCLK, - DA830_LCD_HSYNC, - DA830_UHPI_HCNTL1, - DA830_GPIO1_2, - DA830_GPIO1_3, - DA830_GPIO1_4, - DA830_GPIO1_5, - DA830_GPIO1_6, - DA830_GPIO1_7, - DA830_GPIO1_8, - DA830_GPIO1_9, - DA830_EMA_A_10, - DA830_EMA_A_11, - DA830_EMA_A_12, - DA830_EMA_BA_1, - DA830_EMA_BA_0, - DA830_EMA_CLK, - DA830_EMA_SDCKE, - DA830_NEMA_CAS, - DA830_LCD_VSYNC, - DA830_NLCD_AC_ENB_CS, - DA830_LCD_MCLK, - DA830_LCD_D_5, - DA830_LCD_D_4, - DA830_OBSCLK, - DA830_NEMA_CS_4, - DA830_UHPI_HHWIL, - DA830_AHCLKR2, - DA830_GPIO1_10, - DA830_GPIO1_11, - DA830_GPIO1_12, - DA830_GPIO1_13, - DA830_GPIO1_14, - DA830_GPIO1_15, - DA830_GPIO2_0, - DA830_GPIO2_1, - DA830_NEMA_RAS, - DA830_NEMA_WE, - DA830_NEMA_CS_0, - DA830_NEMA_CS_2, - DA830_NEMA_CS_3, - DA830_NEMA_OE, - DA830_NEMA_WE_DQM_1, - DA830_NEMA_WE_DQM_0, - DA830_NEMA_CS_5, - DA830_UHPI_HRNW, - DA830_NUHPI_HAS, - DA830_NUHPI_HCS, - DA830_NUHPI_HDS1, - DA830_NUHPI_HDS2, - DA830_NUHPI_HINT, - DA830_AXR0_12, - DA830_AMUTE2, - DA830_AXR0_13, - DA830_AXR0_14, - DA830_AXR0_15, - DA830_GPIO2_2, - DA830_GPIO2_3, - DA830_GPIO2_4, - DA830_GPIO2_5, - DA830_GPIO2_6, - DA830_GPIO2_7, - DA830_GPIO2_8, - DA830_GPIO2_9, - DA830_EMA_WAIT_0, - DA830_NUHPI_HRDY, - DA830_GPIO2_10, -}; - -enum davinci_da850_index { - /* UART0 function */ - DA850_NUART0_CTS, - DA850_NUART0_RTS, - DA850_UART0_RXD, - DA850_UART0_TXD, - - /* UART1 function */ - DA850_NUART1_CTS, - DA850_NUART1_RTS, - DA850_UART1_RXD, - DA850_UART1_TXD, - - /* UART2 function */ - DA850_NUART2_CTS, - DA850_NUART2_RTS, - DA850_UART2_RXD, - DA850_UART2_TXD, - - /* I2C1 function */ - DA850_I2C1_SCL, - DA850_I2C1_SDA, - - /* I2C0 function */ - DA850_I2C0_SDA, - DA850_I2C0_SCL, - - /* EMAC function */ - DA850_MII_TXEN, - DA850_MII_TXCLK, - DA850_MII_COL, - DA850_MII_TXD_3, - DA850_MII_TXD_2, - DA850_MII_TXD_1, - DA850_MII_TXD_0, - DA850_MII_RXER, - DA850_MII_CRS, - DA850_MII_RXCLK, - DA850_MII_RXDV, - DA850_MII_RXD_3, - DA850_MII_RXD_2, - DA850_MII_RXD_1, - DA850_MII_RXD_0, - DA850_MDIO_CLK, - DA850_MDIO_D, - DA850_RMII_TXD_0, - DA850_RMII_TXD_1, - DA850_RMII_TXEN, - DA850_RMII_CRS_DV, - DA850_RMII_RXD_0, - DA850_RMII_RXD_1, - DA850_RMII_RXER, - DA850_RMII_MHZ_50_CLK, - - /* McASP function */ - DA850_ACLKR, - DA850_ACLKX, - DA850_AFSR, - DA850_AFSX, - DA850_AHCLKR, - DA850_AHCLKX, - DA850_AMUTE, - DA850_AXR_15, - DA850_AXR_14, - DA850_AXR_13, - DA850_AXR_12, - DA850_AXR_11, - DA850_AXR_10, - DA850_AXR_9, - DA850_AXR_8, - DA850_AXR_7, - DA850_AXR_6, - DA850_AXR_5, - DA850_AXR_4, - DA850_AXR_3, - DA850_AXR_2, - DA850_AXR_1, - DA850_AXR_0, - - /* LCD function */ - DA850_LCD_D_7, - DA850_LCD_D_6, - DA850_LCD_D_5, - DA850_LCD_D_4, - DA850_LCD_D_3, - DA850_LCD_D_2, - DA850_LCD_D_1, - DA850_LCD_D_0, - DA850_LCD_D_15, - DA850_LCD_D_14, - DA850_LCD_D_13, - DA850_LCD_D_12, - DA850_LCD_D_11, - DA850_LCD_D_10, - DA850_LCD_D_9, - DA850_LCD_D_8, - DA850_LCD_PCLK, - DA850_LCD_HSYNC, - DA850_LCD_VSYNC, - DA850_NLCD_AC_ENB_CS, - - /* MMC/SD0 function */ - DA850_MMCSD0_DAT_0, - DA850_MMCSD0_DAT_1, - DA850_MMCSD0_DAT_2, - DA850_MMCSD0_DAT_3, - DA850_MMCSD0_CLK, - DA850_MMCSD0_CMD, - - /* MMC/SD1 function */ - DA850_MMCSD1_DAT_0, - DA850_MMCSD1_DAT_1, - DA850_MMCSD1_DAT_2, - DA850_MMCSD1_DAT_3, - DA850_MMCSD1_CLK, - DA850_MMCSD1_CMD, - - /* EMIF2.5/EMIFA function */ - DA850_EMA_D_7, - DA850_EMA_D_6, - DA850_EMA_D_5, - DA850_EMA_D_4, - DA850_EMA_D_3, - DA850_EMA_D_2, - DA850_EMA_D_1, - DA850_EMA_D_0, - DA850_EMA_A_1, - DA850_EMA_A_2, - DA850_NEMA_CS_3, - DA850_NEMA_CS_4, - DA850_NEMA_WE, - DA850_NEMA_OE, - DA850_EMA_D_15, - DA850_EMA_D_14, - DA850_EMA_D_13, - DA850_EMA_D_12, - DA850_EMA_D_11, - DA850_EMA_D_10, - DA850_EMA_D_9, - DA850_EMA_D_8, - DA850_EMA_A_0, - DA850_EMA_A_3, - DA850_EMA_A_4, - DA850_EMA_A_5, - DA850_EMA_A_6, - DA850_EMA_A_7, - DA850_EMA_A_8, - DA850_EMA_A_9, - DA850_EMA_A_10, - DA850_EMA_A_11, - DA850_EMA_A_12, - DA850_EMA_A_13, - DA850_EMA_A_14, - DA850_EMA_A_15, - DA850_EMA_A_16, - DA850_EMA_A_17, - DA850_EMA_A_18, - DA850_EMA_A_19, - DA850_EMA_A_20, - DA850_EMA_A_21, - DA850_EMA_A_22, - DA850_EMA_A_23, - DA850_EMA_BA_1, - DA850_EMA_CLK, - DA850_EMA_WAIT_1, - DA850_NEMA_CS_2, - - /* GPIO function */ - DA850_GPIO2_4, - DA850_GPIO2_6, - DA850_GPIO2_8, - DA850_GPIO2_15, - DA850_GPIO3_12, - DA850_GPIO3_13, - DA850_GPIO4_0, - DA850_GPIO4_1, - DA850_GPIO6_9, - DA850_GPIO6_10, - DA850_GPIO6_13, - DA850_RTC_ALARM, - - /* VPIF Capture */ - DA850_VPIF_DIN0, - DA850_VPIF_DIN1, - DA850_VPIF_DIN2, - DA850_VPIF_DIN3, - DA850_VPIF_DIN4, - DA850_VPIF_DIN5, - DA850_VPIF_DIN6, - DA850_VPIF_DIN7, - DA850_VPIF_DIN8, - DA850_VPIF_DIN9, - DA850_VPIF_DIN10, - DA850_VPIF_DIN11, - DA850_VPIF_DIN12, - DA850_VPIF_DIN13, - DA850_VPIF_DIN14, - DA850_VPIF_DIN15, - DA850_VPIF_CLKIN0, - DA850_VPIF_CLKIN1, - DA850_VPIF_CLKIN2, - DA850_VPIF_CLKIN3, - - /* VPIF Display */ - DA850_VPIF_DOUT0, - DA850_VPIF_DOUT1, - DA850_VPIF_DOUT2, - DA850_VPIF_DOUT3, - DA850_VPIF_DOUT4, - DA850_VPIF_DOUT5, - DA850_VPIF_DOUT6, - DA850_VPIF_DOUT7, - DA850_VPIF_DOUT8, - DA850_VPIF_DOUT9, - DA850_VPIF_DOUT10, - DA850_VPIF_DOUT11, - DA850_VPIF_DOUT12, - DA850_VPIF_DOUT13, - DA850_VPIF_DOUT14, - DA850_VPIF_DOUT15, - DA850_VPIF_CLKO2, - DA850_VPIF_CLKO3, -}; - -#define PINMUX(x) (4 * (x)) - -#ifdef CONFIG_DAVINCI_MUX -/* setup pin muxing */ -extern int davinci_cfg_reg(unsigned long reg_cfg); -extern int davinci_cfg_reg_list(const short pins[]); -#else -/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */ -static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; } -static inline int davinci_cfg_reg_list(const short pins[]) -{ - return 0; -} -#endif - -#endif /* __INC_MACH_MUX_H */ diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h deleted file mode 100644 index 53b456a5bbe0..000000000000 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Serial port stubs for kernel decompress status messages - * - * Initially based on: - * arch/arm/plat-omap/include/mach/uncompress.h - * - * Original copyrights follow. - * - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Rewritten by: - * Author: <source@mvista.com> - * 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include <linux/types.h> -#include <linux/serial_reg.h> - -#include <asm/mach-types.h> - -#include <mach/serial.h> - -#define IOMEM(x) ((void __force __iomem *)(x)) - -u32 *uart; - -/* PORT_16C550A, in polled non-fifo mode */ -static inline void putc(char c) -{ - if (!uart) - return; - - while (!(uart[UART_LSR] & UART_LSR_THRE)) - barrier(); - uart[UART_TX] = c; -} - -static inline void flush(void) -{ - if (!uart) - return; - - while (!(uart[UART_LSR] & UART_LSR_THRE)) - barrier(); -} - -static inline void set_uart_info(u32 phys) -{ - uart = (u32 *)phys; -} - -#define _DEBUG_LL_ENTRY(machine, phys) \ - { \ - if (machine_is_##machine()) { \ - set_uart_info(phys); \ - break; \ - } \ - } - -#define DEBUG_LL_DAVINCI(machine, port) \ - _DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE) - -#define DEBUG_LL_DA8XX(machine, port) \ - _DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE) - -static inline void __arch_decomp_setup(unsigned long arch_id) -{ - /* - * Initialize the port based on the machine ID from the bootloader. - * Note that we're using macros here instead of switch statement - * as machine_is functions are optimized out for the boards that - * are not selected. - */ - do { - /* Davinci boards */ - DEBUG_LL_DAVINCI(davinci_evm, 0); - DEBUG_LL_DAVINCI(sffsdr, 0); - DEBUG_LL_DAVINCI(neuros_osd2, 0); - DEBUG_LL_DAVINCI(davinci_dm355_evm, 0); - DEBUG_LL_DAVINCI(dm355_leopard, 0); - DEBUG_LL_DAVINCI(davinci_dm6467_evm, 0); - DEBUG_LL_DAVINCI(davinci_dm365_evm, 0); - - /* DA8xx boards */ - DEBUG_LL_DA8XX(davinci_da830_evm, 2); - DEBUG_LL_DA8XX(davinci_da850_evm, 2); - DEBUG_LL_DA8XX(mityomapl138, 1); - DEBUG_LL_DA8XX(omapl138_hawkboard, 2); - } while (0); -} - -#define arch_decomp_setup() __arch_decomp_setup(arch_id) diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c index 6a2ff0a654a5..bab1eea7fca6 100644 --- a/arch/arm/mach-davinci/mux.c +++ b/arch/arm/mach-davinci/mux.c @@ -22,8 +22,8 @@ #include <linux/module.h> #include <linux/spinlock.h> -#include <mach/mux.h> -#include <mach/common.h> +#include "mux.h" +#include "common.h" static void __iomem *pinmux_base; diff --git a/arch/arm/mach-davinci/mux.h b/arch/arm/mach-davinci/mux.h index 5aad1e7dd210..b0d1c4fb78dc 100644 --- a/arch/arm/mach-davinci/mux.h +++ b/arch/arm/mach-davinci/mux.h @@ -13,7 +13,974 @@ #ifndef _MACH_DAVINCI_MUX_H_ #define _MACH_DAVINCI_MUX_H_ -#include <mach/mux.h> +struct mux_config { + const char *name; + const char *mux_reg_name; + const unsigned char mux_reg; + const unsigned char mask_offset; + const unsigned char mask; + const unsigned char mode; + bool debug; +}; + +enum davinci_dm644x_index { + /* ATA and HDDIR functions */ + DM644X_HDIREN, + DM644X_ATAEN, + DM644X_ATAEN_DISABLE, + + /* HPI functions */ + DM644X_HPIEN_DISABLE, + + /* AEAW functions */ + DM644X_AEAW, + DM644X_AEAW0, + DM644X_AEAW1, + DM644X_AEAW2, + DM644X_AEAW3, + DM644X_AEAW4, + + /* Memory Stick */ + DM644X_MSTK, + + /* I2C */ + DM644X_I2C, + + /* ASP function */ + DM644X_MCBSP, + + /* UART1 */ + DM644X_UART1, + + /* UART2 */ + DM644X_UART2, + + /* PWM0 */ + DM644X_PWM0, + + /* PWM1 */ + DM644X_PWM1, + + /* PWM2 */ + DM644X_PWM2, + + /* VLYNQ function */ + DM644X_VLYNQEN, + DM644X_VLSCREN, + DM644X_VLYNQWD, + + /* EMAC and MDIO function */ + DM644X_EMACEN, + + /* GPIO3V[0:16] pins */ + DM644X_GPIO3V, + + /* GPIO pins */ + DM644X_GPIO0, + DM644X_GPIO3, + DM644X_GPIO43_44, + DM644X_GPIO46_47, + + /* VPBE */ + DM644X_RGB666, + + /* LCD */ + DM644X_LOEEN, + DM644X_LFLDEN, +}; + +enum davinci_dm646x_index { + /* ATA function */ + DM646X_ATAEN, + + /* AUDIO Clock */ + DM646X_AUDCK1, + DM646X_AUDCK0, + + /* CRGEN Control */ + DM646X_CRGMUX, + + /* VPIF Control */ + DM646X_STSOMUX_DISABLE, + DM646X_STSIMUX_DISABLE, + DM646X_PTSOMUX_DISABLE, + DM646X_PTSIMUX_DISABLE, + + /* TSIF Control */ + DM646X_STSOMUX, + DM646X_STSIMUX, + DM646X_PTSOMUX_PARALLEL, + DM646X_PTSIMUX_PARALLEL, + DM646X_PTSOMUX_SERIAL, + DM646X_PTSIMUX_SERIAL, +}; + +enum davinci_dm355_index { + /* MMC/SD 0 */ + DM355_MMCSD0, + + /* MMC/SD 1 */ + DM355_SD1_CLK, + DM355_SD1_CMD, + DM355_SD1_DATA3, + DM355_SD1_DATA2, + DM355_SD1_DATA1, + DM355_SD1_DATA0, + + /* I2C */ + DM355_I2C_SDA, + DM355_I2C_SCL, + + /* ASP0 function */ + DM355_MCBSP0_BDX, + DM355_MCBSP0_X, + DM355_MCBSP0_BFSX, + DM355_MCBSP0_BDR, + DM355_MCBSP0_R, + DM355_MCBSP0_BFSR, + + /* SPI0 */ + DM355_SPI0_SDI, + DM355_SPI0_SDENA0, + DM355_SPI0_SDENA1, + + /* IRQ muxing */ + DM355_INT_EDMA_CC, + DM355_INT_EDMA_TC0_ERR, + DM355_INT_EDMA_TC1_ERR, + + /* EDMA event muxing */ + DM355_EVT8_ASP1_TX, + DM355_EVT9_ASP1_RX, + DM355_EVT26_MMC0_RX, + + /* Video Out */ + DM355_VOUT_FIELD, + DM355_VOUT_FIELD_G70, + DM355_VOUT_HVSYNC, + DM355_VOUT_COUTL_EN, + DM355_VOUT_COUTH_EN, + + /* Video In Pin Mux */ + DM355_VIN_PCLK, + DM355_VIN_CAM_WEN, + DM355_VIN_CAM_VD, + DM355_VIN_CAM_HD, + DM355_VIN_YIN_EN, + DM355_VIN_CINL_EN, + DM355_VIN_CINH_EN, +}; + +enum davinci_dm365_index { + /* MMC/SD 0 */ + DM365_MMCSD0, + + /* MMC/SD 1 */ + DM365_SD1_CLK, + DM365_SD1_CMD, + DM365_SD1_DATA3, + DM365_SD1_DATA2, + DM365_SD1_DATA1, + DM365_SD1_DATA0, + + /* I2C */ + DM365_I2C_SDA, + DM365_I2C_SCL, + + /* AEMIF */ + DM365_AEMIF_AR_A14, + DM365_AEMIF_AR_BA0, + DM365_AEMIF_A3, + DM365_AEMIF_A7, + DM365_AEMIF_D15_8, + DM365_AEMIF_CE0, + DM365_AEMIF_CE1, + DM365_AEMIF_WE_OE, + + /* ASP0 function */ + DM365_MCBSP0_BDX, + DM365_MCBSP0_X, + DM365_MCBSP0_BFSX, + DM365_MCBSP0_BDR, + DM365_MCBSP0_R, + DM365_MCBSP0_BFSR, + + /* SPI0 */ + DM365_SPI0_SCLK, + DM365_SPI0_SDI, + DM365_SPI0_SDO, + DM365_SPI0_SDENA0, + DM365_SPI0_SDENA1, + + /* UART */ + DM365_UART0_RXD, + DM365_UART0_TXD, + DM365_UART1_RXD, + DM365_UART1_TXD, + DM365_UART1_RTS, + DM365_UART1_CTS, + + /* EMAC */ + DM365_EMAC_TX_EN, + DM365_EMAC_TX_CLK, + DM365_EMAC_COL, + DM365_EMAC_TXD3, + DM365_EMAC_TXD2, + DM365_EMAC_TXD1, + DM365_EMAC_TXD0, + DM365_EMAC_RXD3, + DM365_EMAC_RXD2, + DM365_EMAC_RXD1, + DM365_EMAC_RXD0, + DM365_EMAC_RX_CLK, + DM365_EMAC_RX_DV, + DM365_EMAC_RX_ER, + DM365_EMAC_CRS, + DM365_EMAC_MDIO, + DM365_EMAC_MDCLK, + + /* Key Scan */ + DM365_KEYSCAN, + + /* PWM */ + DM365_PWM0, + DM365_PWM0_G23, + DM365_PWM1, + DM365_PWM1_G25, + DM365_PWM2_G87, + DM365_PWM2_G88, + DM365_PWM2_G89, + DM365_PWM2_G90, + DM365_PWM3_G80, + DM365_PWM3_G81, + DM365_PWM3_G85, + DM365_PWM3_G86, + + /* SPI1 */ + DM365_SPI1_SCLK, + DM365_SPI1_SDO, + DM365_SPI1_SDI, + DM365_SPI1_SDENA0, + DM365_SPI1_SDENA1, + + /* SPI2 */ + DM365_SPI2_SCLK, + DM365_SPI2_SDO, + DM365_SPI2_SDI, + DM365_SPI2_SDENA0, + DM365_SPI2_SDENA1, + + /* SPI3 */ + DM365_SPI3_SCLK, + DM365_SPI3_SDO, + DM365_SPI3_SDI, + DM365_SPI3_SDENA0, + DM365_SPI3_SDENA1, + + /* SPI4 */ + DM365_SPI4_SCLK, + DM365_SPI4_SDO, + DM365_SPI4_SDI, + DM365_SPI4_SDENA0, + DM365_SPI4_SDENA1, + + /* Clock */ + DM365_CLKOUT0, + DM365_CLKOUT1, + DM365_CLKOUT2, + + /* GPIO */ + DM365_GPIO20, + DM365_GPIO30, + DM365_GPIO31, + DM365_GPIO32, + DM365_GPIO33, + DM365_GPIO40, + DM365_GPIO64_57, + + /* Video */ + DM365_VOUT_FIELD, + DM365_VOUT_FIELD_G81, + DM365_VOUT_HVSYNC, + DM365_VOUT_COUTL_EN, + DM365_VOUT_COUTH_EN, + DM365_VIN_CAM_WEN, + DM365_VIN_CAM_VD, + DM365_VIN_CAM_HD, + DM365_VIN_YIN4_7_EN, + DM365_VIN_YIN0_3_EN, + + /* IRQ muxing */ + DM365_INT_EDMA_CC, + DM365_INT_EDMA_TC0_ERR, + DM365_INT_EDMA_TC1_ERR, + DM365_INT_EDMA_TC2_ERR, + DM365_INT_EDMA_TC3_ERR, + DM365_INT_PRTCSS, + DM365_INT_EMAC_RXTHRESH, + DM365_INT_EMAC_RXPULSE, + DM365_INT_EMAC_TXPULSE, + DM365_INT_EMAC_MISCPULSE, + DM365_INT_IMX0_ENABLE, + DM365_INT_IMX0_DISABLE, + DM365_INT_HDVICP_ENABLE, + DM365_INT_HDVICP_DISABLE, + DM365_INT_IMX1_ENABLE, + DM365_INT_IMX1_DISABLE, + DM365_INT_NSF_ENABLE, + DM365_INT_NSF_DISABLE, + + /* EDMA event muxing */ + DM365_EVT2_ASP_TX, + DM365_EVT3_ASP_RX, + DM365_EVT2_VC_TX, + DM365_EVT3_VC_RX, + DM365_EVT26_MMC0_RX, +}; + +enum da830_index { + DA830_GPIO7_14, + DA830_RTCK, + DA830_GPIO7_15, + DA830_EMU_0, + DA830_EMB_SDCKE, + DA830_EMB_CLK_GLUE, + DA830_EMB_CLK, + DA830_NEMB_CS_0, + DA830_NEMB_CAS, + DA830_NEMB_RAS, + DA830_NEMB_WE, + DA830_EMB_BA_1, + DA830_EMB_BA_0, + DA830_EMB_A_0, + DA830_EMB_A_1, + DA830_EMB_A_2, + DA830_EMB_A_3, + DA830_EMB_A_4, + DA830_EMB_A_5, + DA830_GPIO7_0, + DA830_GPIO7_1, + DA830_GPIO7_2, + DA830_GPIO7_3, + DA830_GPIO7_4, + DA830_GPIO7_5, + DA830_GPIO7_6, + DA830_GPIO7_7, + DA830_EMB_A_6, + DA830_EMB_A_7, + DA830_EMB_A_8, + DA830_EMB_A_9, + DA830_EMB_A_10, + DA830_EMB_A_11, + DA830_EMB_A_12, + DA830_EMB_D_31, + DA830_GPIO7_8, + DA830_GPIO7_9, + DA830_GPIO7_10, + DA830_GPIO7_11, + DA830_GPIO7_12, + DA830_GPIO7_13, + DA830_GPIO3_13, + DA830_EMB_D_30, + DA830_EMB_D_29, + DA830_EMB_D_28, + DA830_EMB_D_27, + DA830_EMB_D_26, + DA830_EMB_D_25, + DA830_EMB_D_24, + DA830_EMB_D_23, + DA830_EMB_D_22, + DA830_EMB_D_21, + DA830_EMB_D_20, + DA830_EMB_D_19, + DA830_EMB_D_18, + DA830_EMB_D_17, + DA830_EMB_D_16, + DA830_NEMB_WE_DQM_3, + DA830_NEMB_WE_DQM_2, + DA830_EMB_D_0, + DA830_EMB_D_1, + DA830_EMB_D_2, + DA830_EMB_D_3, + DA830_EMB_D_4, + DA830_EMB_D_5, + DA830_EMB_D_6, + DA830_GPIO6_0, + DA830_GPIO6_1, + DA830_GPIO6_2, + DA830_GPIO6_3, + DA830_GPIO6_4, + DA830_GPIO6_5, + DA830_GPIO6_6, + DA830_EMB_D_7, + DA830_EMB_D_8, + DA830_EMB_D_9, + DA830_EMB_D_10, + DA830_EMB_D_11, + DA830_EMB_D_12, + DA830_EMB_D_13, + DA830_EMB_D_14, + DA830_GPIO6_7, + DA830_GPIO6_8, + DA830_GPIO6_9, + DA830_GPIO6_10, + DA830_GPIO6_11, + DA830_GPIO6_12, + DA830_GPIO6_13, + DA830_GPIO6_14, + DA830_EMB_D_15, + DA830_NEMB_WE_DQM_1, + DA830_NEMB_WE_DQM_0, + DA830_SPI0_SOMI_0, + DA830_SPI0_SIMO_0, + DA830_SPI0_CLK, + DA830_NSPI0_ENA, + DA830_NSPI0_SCS_0, + DA830_EQEP0I, + DA830_EQEP0S, + DA830_EQEP1I, + DA830_NUART0_CTS, + DA830_NUART0_RTS, + DA830_EQEP0A, + DA830_EQEP0B, + DA830_GPIO6_15, + DA830_GPIO5_14, + DA830_GPIO5_15, + DA830_GPIO5_0, + DA830_GPIO5_1, + DA830_GPIO5_2, + DA830_GPIO5_3, + DA830_GPIO5_4, + DA830_SPI1_SOMI_0, + DA830_SPI1_SIMO_0, + DA830_SPI1_CLK, + DA830_UART0_RXD, + DA830_UART0_TXD, + DA830_AXR1_10, + DA830_AXR1_11, + DA830_NSPI1_ENA, + DA830_I2C1_SCL, + DA830_I2C1_SDA, + DA830_EQEP1S, + DA830_I2C0_SDA, + DA830_I2C0_SCL, + DA830_UART2_RXD, + DA830_TM64P0_IN12, + DA830_TM64P0_OUT12, + DA830_GPIO5_5, + DA830_GPIO5_6, + DA830_GPIO5_7, + DA830_GPIO5_8, + DA830_GPIO5_9, + DA830_GPIO5_10, + DA830_GPIO5_11, + DA830_GPIO5_12, + DA830_NSPI1_SCS_0, + DA830_USB0_DRVVBUS, + DA830_AHCLKX0, + DA830_ACLKX0, + DA830_AFSX0, + DA830_AHCLKR0, + DA830_ACLKR0, + DA830_AFSR0, + DA830_UART2_TXD, + DA830_AHCLKX2, + DA830_ECAP0_APWM0, + DA830_RMII_MHZ_50_CLK, + DA830_ECAP1_APWM1, + DA830_USB_REFCLKIN, + DA830_GPIO5_13, + DA830_GPIO4_15, + DA830_GPIO2_11, + DA830_GPIO2_12, + DA830_GPIO2_13, + DA830_GPIO2_14, + DA830_GPIO2_15, + DA830_GPIO3_12, + DA830_AMUTE0, + DA830_AXR0_0, + DA830_AXR0_1, + DA830_AXR0_2, + DA830_AXR0_3, + DA830_AXR0_4, + DA830_AXR0_5, + DA830_AXR0_6, + DA830_RMII_TXD_0, + DA830_RMII_TXD_1, + DA830_RMII_TXEN, + DA830_RMII_CRS_DV, + DA830_RMII_RXD_0, + DA830_RMII_RXD_1, + DA830_RMII_RXER, + DA830_AFSR2, + DA830_ACLKX2, + DA830_AXR2_3, + DA830_AXR2_2, + DA830_AXR2_1, + DA830_AFSX2, + DA830_ACLKR2, + DA830_NRESETOUT, + DA830_GPIO3_0, + DA830_GPIO3_1, + DA830_GPIO3_2, + DA830_GPIO3_3, + DA830_GPIO3_4, + DA830_GPIO3_5, + DA830_GPIO3_6, + DA830_AXR0_7, + DA830_AXR0_8, + DA830_UART1_RXD, + DA830_UART1_TXD, + DA830_AXR0_11, + DA830_AHCLKX1, + DA830_ACLKX1, + DA830_AFSX1, + DA830_MDIO_CLK, + DA830_MDIO_D, + DA830_AXR0_9, + DA830_AXR0_10, + DA830_EPWM0B, + DA830_EPWM0A, + DA830_EPWMSYNCI, + DA830_AXR2_0, + DA830_EPWMSYNC0, + DA830_GPIO3_7, + DA830_GPIO3_8, + DA830_GPIO3_9, + DA830_GPIO3_10, + DA830_GPIO3_11, + DA830_GPIO3_14, + DA830_GPIO3_15, + DA830_GPIO4_10, + DA830_AHCLKR1, + DA830_ACLKR1, + DA830_AFSR1, + DA830_AMUTE1, + DA830_AXR1_0, + DA830_AXR1_1, + DA830_AXR1_2, + DA830_AXR1_3, + DA830_ECAP2_APWM2, + DA830_EHRPWMGLUETZ, + DA830_EQEP1A, + DA830_GPIO4_11, + DA830_GPIO4_12, + DA830_GPIO4_13, + DA830_GPIO4_14, + DA830_GPIO4_0, + DA830_GPIO4_1, + DA830_GPIO4_2, + DA830_GPIO4_3, + DA830_AXR1_4, + DA830_AXR1_5, + DA830_AXR1_6, + DA830_AXR1_7, + DA830_AXR1_8, + DA830_AXR1_9, + DA830_EMA_D_0, + DA830_EMA_D_1, + DA830_EQEP1B, + DA830_EPWM2B, + DA830_EPWM2A, + DA830_EPWM1B, + DA830_EPWM1A, + DA830_MMCSD_DAT_0, + DA830_MMCSD_DAT_1, + DA830_UHPI_HD_0, + DA830_UHPI_HD_1, + DA830_GPIO4_4, + DA830_GPIO4_5, + DA830_GPIO4_6, + DA830_GPIO4_7, + DA830_GPIO4_8, + DA830_GPIO4_9, + DA830_GPIO0_0, + DA830_GPIO0_1, + DA830_EMA_D_2, + DA830_EMA_D_3, + DA830_EMA_D_4, + DA830_EMA_D_5, + DA830_EMA_D_6, + DA830_EMA_D_7, + DA830_EMA_D_8, + DA830_EMA_D_9, + DA830_MMCSD_DAT_2, + DA830_MMCSD_DAT_3, + DA830_MMCSD_DAT_4, + DA830_MMCSD_DAT_5, + DA830_MMCSD_DAT_6, + DA830_MMCSD_DAT_7, + DA830_UHPI_HD_8, + DA830_UHPI_HD_9, + DA830_UHPI_HD_2, + DA830_UHPI_HD_3, + DA830_UHPI_HD_4, + DA830_UHPI_HD_5, + DA830_UHPI_HD_6, + DA830_UHPI_HD_7, + DA830_LCD_D_8, + DA830_LCD_D_9, + DA830_GPIO0_2, + DA830_GPIO0_3, + DA830_GPIO0_4, + DA830_GPIO0_5, + DA830_GPIO0_6, + DA830_GPIO0_7, + DA830_GPIO0_8, + DA830_GPIO0_9, + DA830_EMA_D_10, + DA830_EMA_D_11, + DA830_EMA_D_12, + DA830_EMA_D_13, + DA830_EMA_D_14, + DA830_EMA_D_15, + DA830_EMA_A_0, + DA830_EMA_A_1, + DA830_UHPI_HD_10, + DA830_UHPI_HD_11, + DA830_UHPI_HD_12, + DA830_UHPI_HD_13, + DA830_UHPI_HD_14, + DA830_UHPI_HD_15, + DA830_LCD_D_7, + DA830_MMCSD_CLK, + DA830_LCD_D_10, + DA830_LCD_D_11, + DA830_LCD_D_12, + DA830_LCD_D_13, + DA830_LCD_D_14, + DA830_LCD_D_15, + DA830_UHPI_HCNTL0, + DA830_GPIO0_10, + DA830_GPIO0_11, + DA830_GPIO0_12, + DA830_GPIO0_13, + DA830_GPIO0_14, + DA830_GPIO0_15, + DA830_GPIO1_0, + DA830_GPIO1_1, + DA830_EMA_A_2, + DA830_EMA_A_3, + DA830_EMA_A_4, + DA830_EMA_A_5, + DA830_EMA_A_6, + DA830_EMA_A_7, + DA830_EMA_A_8, + DA830_EMA_A_9, + DA830_MMCSD_CMD, + DA830_LCD_D_6, + DA830_LCD_D_3, + DA830_LCD_D_2, + DA830_LCD_D_1, + DA830_LCD_D_0, + DA830_LCD_PCLK, + DA830_LCD_HSYNC, + DA830_UHPI_HCNTL1, + DA830_GPIO1_2, + DA830_GPIO1_3, + DA830_GPIO1_4, + DA830_GPIO1_5, + DA830_GPIO1_6, + DA830_GPIO1_7, + DA830_GPIO1_8, + DA830_GPIO1_9, + DA830_EMA_A_10, + DA830_EMA_A_11, + DA830_EMA_A_12, + DA830_EMA_BA_1, + DA830_EMA_BA_0, + DA830_EMA_CLK, + DA830_EMA_SDCKE, + DA830_NEMA_CAS, + DA830_LCD_VSYNC, + DA830_NLCD_AC_ENB_CS, + DA830_LCD_MCLK, + DA830_LCD_D_5, + DA830_LCD_D_4, + DA830_OBSCLK, + DA830_NEMA_CS_4, + DA830_UHPI_HHWIL, + DA830_AHCLKR2, + DA830_GPIO1_10, + DA830_GPIO1_11, + DA830_GPIO1_12, + DA830_GPIO1_13, + DA830_GPIO1_14, + DA830_GPIO1_15, + DA830_GPIO2_0, + DA830_GPIO2_1, + DA830_NEMA_RAS, + DA830_NEMA_WE, + DA830_NEMA_CS_0, + DA830_NEMA_CS_2, + DA830_NEMA_CS_3, + DA830_NEMA_OE, + DA830_NEMA_WE_DQM_1, + DA830_NEMA_WE_DQM_0, + DA830_NEMA_CS_5, + DA830_UHPI_HRNW, + DA830_NUHPI_HAS, + DA830_NUHPI_HCS, + DA830_NUHPI_HDS1, + DA830_NUHPI_HDS2, + DA830_NUHPI_HINT, + DA830_AXR0_12, + DA830_AMUTE2, + DA830_AXR0_13, + DA830_AXR0_14, + DA830_AXR0_15, + DA830_GPIO2_2, + DA830_GPIO2_3, + DA830_GPIO2_4, + DA830_GPIO2_5, + DA830_GPIO2_6, + DA830_GPIO2_7, + DA830_GPIO2_8, + DA830_GPIO2_9, + DA830_EMA_WAIT_0, + DA830_NUHPI_HRDY, + DA830_GPIO2_10, +}; + +enum davinci_da850_index { + /* UART0 function */ + DA850_NUART0_CTS, + DA850_NUART0_RTS, + DA850_UART0_RXD, + DA850_UART0_TXD, + + /* UART1 function */ + DA850_NUART1_CTS, + DA850_NUART1_RTS, + DA850_UART1_RXD, + DA850_UART1_TXD, + + /* UART2 function */ + DA850_NUART2_CTS, + DA850_NUART2_RTS, + DA850_UART2_RXD, + DA850_UART2_TXD, + + /* I2C1 function */ + DA850_I2C1_SCL, + DA850_I2C1_SDA, + + /* I2C0 function */ + DA850_I2C0_SDA, + DA850_I2C0_SCL, + + /* EMAC function */ + DA850_MII_TXEN, + DA850_MII_TXCLK, + DA850_MII_COL, + DA850_MII_TXD_3, + DA850_MII_TXD_2, + DA850_MII_TXD_1, + DA850_MII_TXD_0, + DA850_MII_RXER, + DA850_MII_CRS, + DA850_MII_RXCLK, + DA850_MII_RXDV, + DA850_MII_RXD_3, + DA850_MII_RXD_2, + DA850_MII_RXD_1, + DA850_MII_RXD_0, + DA850_MDIO_CLK, + DA850_MDIO_D, + DA850_RMII_TXD_0, + DA850_RMII_TXD_1, + DA850_RMII_TXEN, + DA850_RMII_CRS_DV, + DA850_RMII_RXD_0, + DA850_RMII_RXD_1, + DA850_RMII_RXER, + DA850_RMII_MHZ_50_CLK, + + /* McASP function */ + DA850_ACLKR, + DA850_ACLKX, + DA850_AFSR, + DA850_AFSX, + DA850_AHCLKR, + DA850_AHCLKX, + DA850_AMUTE, + DA850_AXR_15, + DA850_AXR_14, + DA850_AXR_13, + DA850_AXR_12, + DA850_AXR_11, + DA850_AXR_10, + DA850_AXR_9, + DA850_AXR_8, + DA850_AXR_7, + DA850_AXR_6, + DA850_AXR_5, + DA850_AXR_4, + DA850_AXR_3, + DA850_AXR_2, + DA850_AXR_1, + DA850_AXR_0, + + /* LCD function */ + DA850_LCD_D_7, + DA850_LCD_D_6, + DA850_LCD_D_5, + DA850_LCD_D_4, + DA850_LCD_D_3, + DA850_LCD_D_2, + DA850_LCD_D_1, + DA850_LCD_D_0, + DA850_LCD_D_15, + DA850_LCD_D_14, + DA850_LCD_D_13, + DA850_LCD_D_12, + DA850_LCD_D_11, + DA850_LCD_D_10, + DA850_LCD_D_9, + DA850_LCD_D_8, + DA850_LCD_PCLK, + DA850_LCD_HSYNC, + DA850_LCD_VSYNC, + DA850_NLCD_AC_ENB_CS, + + /* MMC/SD0 function */ + DA850_MMCSD0_DAT_0, + DA850_MMCSD0_DAT_1, + DA850_MMCSD0_DAT_2, + DA850_MMCSD0_DAT_3, + DA850_MMCSD0_CLK, + DA850_MMCSD0_CMD, + + /* MMC/SD1 function */ + DA850_MMCSD1_DAT_0, + DA850_MMCSD1_DAT_1, + DA850_MMCSD1_DAT_2, + DA850_MMCSD1_DAT_3, + DA850_MMCSD1_CLK, + DA850_MMCSD1_CMD, + + /* EMIF2.5/EMIFA function */ + DA850_EMA_D_7, + DA850_EMA_D_6, + DA850_EMA_D_5, + DA850_EMA_D_4, + DA850_EMA_D_3, + DA850_EMA_D_2, + DA850_EMA_D_1, + DA850_EMA_D_0, + DA850_EMA_A_1, + DA850_EMA_A_2, + DA850_NEMA_CS_3, + DA850_NEMA_CS_4, + DA850_NEMA_WE, + DA850_NEMA_OE, + DA850_EMA_D_15, + DA850_EMA_D_14, + DA850_EMA_D_13, + DA850_EMA_D_12, + DA850_EMA_D_11, + DA850_EMA_D_10, + DA850_EMA_D_9, + DA850_EMA_D_8, + DA850_EMA_A_0, + DA850_EMA_A_3, + DA850_EMA_A_4, + DA850_EMA_A_5, + DA850_EMA_A_6, + DA850_EMA_A_7, + DA850_EMA_A_8, + DA850_EMA_A_9, + DA850_EMA_A_10, + DA850_EMA_A_11, + DA850_EMA_A_12, + DA850_EMA_A_13, + DA850_EMA_A_14, + DA850_EMA_A_15, + DA850_EMA_A_16, + DA850_EMA_A_17, + DA850_EMA_A_18, + DA850_EMA_A_19, + DA850_EMA_A_20, + DA850_EMA_A_21, + DA850_EMA_A_22, + DA850_EMA_A_23, + DA850_EMA_BA_1, + DA850_EMA_CLK, + DA850_EMA_WAIT_1, + DA850_NEMA_CS_2, + + /* GPIO function */ + DA850_GPIO2_4, + DA850_GPIO2_6, + DA850_GPIO2_8, + DA850_GPIO2_15, + DA850_GPIO3_12, + DA850_GPIO3_13, + DA850_GPIO4_0, + DA850_GPIO4_1, + DA850_GPIO6_9, + DA850_GPIO6_10, + DA850_GPIO6_13, + DA850_RTC_ALARM, + + /* VPIF Capture */ + DA850_VPIF_DIN0, + DA850_VPIF_DIN1, + DA850_VPIF_DIN2, + DA850_VPIF_DIN3, + DA850_VPIF_DIN4, + DA850_VPIF_DIN5, + DA850_VPIF_DIN6, + DA850_VPIF_DIN7, + DA850_VPIF_DIN8, + DA850_VPIF_DIN9, + DA850_VPIF_DIN10, + DA850_VPIF_DIN11, + DA850_VPIF_DIN12, + DA850_VPIF_DIN13, + DA850_VPIF_DIN14, + DA850_VPIF_DIN15, + DA850_VPIF_CLKIN0, + DA850_VPIF_CLKIN1, + DA850_VPIF_CLKIN2, + DA850_VPIF_CLKIN3, + + /* VPIF Display */ + DA850_VPIF_DOUT0, + DA850_VPIF_DOUT1, + DA850_VPIF_DOUT2, + DA850_VPIF_DOUT3, + DA850_VPIF_DOUT4, + DA850_VPIF_DOUT5, + DA850_VPIF_DOUT6, + DA850_VPIF_DOUT7, + DA850_VPIF_DOUT8, + DA850_VPIF_DOUT9, + DA850_VPIF_DOUT10, + DA850_VPIF_DOUT11, + DA850_VPIF_DOUT12, + DA850_VPIF_DOUT13, + DA850_VPIF_DOUT14, + DA850_VPIF_DOUT15, + DA850_VPIF_CLKO2, + DA850_VPIF_CLKO3, +}; + +#define PINMUX(x) (4 * (x)) + +#ifdef CONFIG_DAVINCI_MUX +/* setup pin muxing */ +extern int davinci_cfg_reg(unsigned long reg_cfg); +extern int davinci_cfg_reg_list(const short pins[]); +#else +/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */ +static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; } +static inline int davinci_cfg_reg_list(const short pins[]) +{ + return 0; +} +#endif + #define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\ [soc##_##desc] = { \ diff --git a/arch/arm/mach-davinci/pdata-quirks.c b/arch/arm/mach-davinci/pdata-quirks.c index 67f1c8537354..b8b5f1a5e092 100644 --- a/arch/arm/mach-davinci/pdata-quirks.c +++ b/arch/arm/mach-davinci/pdata-quirks.c @@ -10,8 +10,8 @@ #include <media/i2c/tvp514x.h> #include <media/i2c/adv7343.h> -#include <mach/common.h> -#include <mach/da8xx.h> +#include "common.h" +#include "da8xx.h" struct pdata_init { const char *compatible; diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c index 323ee4e657c4..8aa39db095d7 100644 --- a/arch/arm/mach-davinci/pm.c +++ b/arch/arm/mach-davinci/pm.c @@ -16,11 +16,10 @@ #include <asm/delay.h> #include <asm/io.h> -#include <mach/common.h> -#include <mach/da8xx.h> -#include <mach/mux.h> -#include <mach/pm.h> - +#include "common.h" +#include "da8xx.h" +#include "mux.h" +#include "pm.h" #include "clock.h" #include "psc.h" #include "sram.h" diff --git a/arch/arm/mach-davinci/include/mach/pm.h b/arch/arm/mach-davinci/pm.h index 5a5f0ecc0704..5a5f0ecc0704 100644 --- a/arch/arm/mach-davinci/include/mach/pm.h +++ b/arch/arm/mach-davinci/pm.h diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index 127b62ce7b1e..7f7814807bb5 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -14,8 +14,8 @@ #include <linux/clk.h> #include <linux/io.h> -#include <mach/serial.h> -#include <mach/cputype.h> +#include "serial.h" +#include "cputype.h" static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, int value) diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/serial.h index d4b4aa87964f..14473cb19852 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/serial.h @@ -13,7 +13,7 @@ #include <asm/memory.h> -#include <mach/hardware.h> +#include "hardware.h" #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c index bbae190fd82c..d04f39fc84b6 100644 --- a/arch/arm/mach-davinci/sram.c +++ b/arch/arm/mach-davinci/sram.c @@ -9,7 +9,7 @@ #include <linux/io.h> #include <linux/genalloc.h> -#include <mach/common.h> +#include "common.h" #include "sram.h" static struct gen_pool *sram_pool; diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c index 25f21ee86f1a..9c8fc5031907 100644 --- a/arch/arm/mach-davinci/usb-da8xx.c +++ b/arch/arm/mach-davinci/usb-da8xx.c @@ -15,10 +15,9 @@ #include <linux/platform_device.h> #include <linux/usb/musb.h> -#include <mach/common.h> -#include <mach/cputype.h> -#include <mach/da8xx.h> - +#include "common.h" +#include "cputype.h" +#include "da8xx.h" #include "irqs.h" #define DA8XX_USB0_BASE 0x01e00000 diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index dd8db61cdd1c..a9e5c6e91e5d 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -8,9 +8,8 @@ #include <linux/platform_data/usb-davinci.h> #include <linux/usb/musb.h> -#include <mach/common.h> -#include <mach/cputype.h> - +#include "common.h" +#include "cputype.h" #include "irqs.h" #define DAVINCI_USB_OTG_BASE 0x01c64000 diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig index 7747fe64420a..c30c69c664ea 100644 --- a/arch/arm/mach-dove/Kconfig +++ b/arch/arm/mach-dove/Kconfig @@ -1,7 +1,17 @@ # SPDX-License-Identifier: GPL-2.0 -if ARCH_DOVE +menuconfig ARCH_DOVE + bool "Marvell Dove" if ARCH_MULTI_V7 + select CPU_PJ4 + select GPIOLIB + select MVEBU_MBUS + select PINCTRL + select PINCTRL_DOVE + select PLAT_ORION_LEGACY + select PM_GENERIC_DOMAINS if PM + help + Support for the Marvell Dove SoC 88AP510 -menu "Marvell Dove Implementations" +if ARCH_DOVE config DOVE_LEGACY bool @@ -21,6 +31,4 @@ config MACH_CM_A510 Say 'Y' here if you want your kernel to support the CompuLab CM-A510 Board. -endmenu - endif diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile index cdf163cab738..e83f6492834d 100644 --- a/arch/arm/mach-dove/Makefile +++ b/arch/arm/mach-dove/Makefile @@ -1,4 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include + obj-y += common.o obj-$(CONFIG_DOVE_LEGACY) += irq.o mpp.o obj-$(CONFIG_PCI) += pcie.o diff --git a/arch/arm/mach-dove/include/mach/uncompress.h b/arch/arm/mach-dove/include/mach/uncompress.h deleted file mode 100644 index ddf873f35e2b..000000000000 --- a/arch/arm/mach-dove/include/mach/uncompress.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define UART0_PHYS_BASE (0xf1000000 + 0x12000) - -#define UART_THR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x0)) -#define UART_LSR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x14)) - -#define LSR_THRE 0x20 - -static inline void putc(const char c) -{ - int i; - - for (i = 0; i < 0x1000; i++) { - /* Transmit fifo not full? */ - if (*UART_LSR & LSR_THRE) - break; - } - - *UART_THR = c; -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index 15c68a646d51..21f4cc2ba651 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -1,4 +1,17 @@ # SPDX-License-Identifier: GPL-2.0-only +menuconfig ARCH_EP93XX + bool "EP93xx-based" + depends on ARCH_MULTI_V4T + depends on CPU_LITTLE_ENDIAN + select ARCH_SPARSEMEM_ENABLE + select ARM_AMBA + select ARM_VIC + select CLKSRC_MMIO + select CPU_ARM920T + select GPIOLIB + help + This enables support for the Cirrus EP93xx series of CPUs. + if ARCH_EP93XX menu "Cirrus EP93xx Implementation Options" diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c index 8d5e349a7a6d..0c48d3c5b8e7 100644 --- a/arch/arm/mach-ep93xx/adssphere.c +++ b/arch/arm/mach-ep93xx/adssphere.c @@ -32,6 +32,7 @@ static void __init adssphere_init_machine(void) MACHINE_START(ADSSPHERE, "ADS Sphere board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .init_time = ep93xx_timer_init, diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index cc75087134d3..85a496ddc619 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -148,8 +148,10 @@ static struct clk_hw *ep93xx_clk_register_gate(const char *name, psc->lock = &clk_lock; clk = clk_register(NULL, &psc->hw); - if (IS_ERR(clk)) + if (IS_ERR(clk)) { kfree(psc); + return ERR_CAST(clk); + } return &psc->hw; } @@ -207,7 +209,7 @@ static int ep93xx_mux_determine_rate(struct clk_hw *hw, struct clk_rate_request *req) { unsigned long rate = req->rate; - struct clk *best_parent = 0; + struct clk *best_parent = NULL; unsigned long __parent_rate; unsigned long best_rate = 0, actual_rate, mclk_rate; unsigned long best_parent_rate; @@ -343,9 +345,10 @@ static struct clk_hw *clk_hw_register_ddiv(const char *name, psc->hw.init = &init; clk = clk_register(NULL, &psc->hw); - if (IS_ERR(clk)) + if (IS_ERR(clk)) { kfree(psc); - + return ERR_CAST(clk); + } return &psc->hw; } @@ -450,9 +453,10 @@ static struct clk_hw *clk_hw_register_div(const char *name, psc->hw.init = &init; clk = clk_register(NULL, &psc->hw); - if (IS_ERR(clk)) + if (IS_ERR(clk)) { kfree(psc); - + return ERR_CAST(clk); + } return &psc->hw; } diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index a3b4e843456a..2d58e273c96d 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -47,6 +47,7 @@ #include <asm/mach/map.h> #include "soc.h" +#include "irqs.h" /************************************************************************* * Static I/O mappings that are needed for all EP93xx platforms @@ -75,8 +76,8 @@ void __init ep93xx_map_io(void) *************************************************************************/ void __init ep93xx_init_irq(void) { - vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0); - vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0); + vic_init(EP93XX_VIC1_BASE, IRQ_EP93XX_VIC0, EP93XX_VIC1_VALID_IRQ_MASK, 0); + vic_init(EP93XX_VIC2_BASE, IRQ_EP93XX_VIC1, EP93XX_VIC2_VALID_IRQ_MASK, 0); } diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index af0e22471ebd..4b90899a66e9 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -243,6 +243,7 @@ static void __init edb93xx_init_machine(void) MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board") /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .init_time = ep93xx_timer_init, @@ -255,6 +256,7 @@ MACHINE_END MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board") /* Maintainer: George Kashperko <george@chas.com.ua> */ .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .init_time = ep93xx_timer_init, @@ -267,6 +269,7 @@ MACHINE_END MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .init_time = ep93xx_timer_init, @@ -279,6 +282,7 @@ MACHINE_END MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board") /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .init_time = ep93xx_timer_init, @@ -291,6 +295,7 @@ MACHINE_END MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .init_time = ep93xx_timer_init, @@ -303,6 +308,7 @@ MACHINE_END MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */ .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .init_time = ep93xx_timer_init, @@ -315,6 +321,7 @@ MACHINE_END MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .init_time = ep93xx_timer_init, @@ -327,6 +334,7 @@ MACHINE_END MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .init_time = ep93xx_timer_init, diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/ep93xx-regs.h index 6839ea032e58..8fa3646de0a4 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/ep93xx-regs.h @@ -1,8 +1,4 @@ /* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h - */ - #ifndef __ASM_ARCH_EP93XX_REGS_H #define __ASM_ARCH_EP93XX_REGS_H diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c index d7f9890321eb..0b7043e3e178 100644 --- a/arch/arm/mach-ep93xx/gesbc9312.c +++ b/arch/arm/mach-ep93xx/gesbc9312.c @@ -32,6 +32,7 @@ static void __init gesbc9312_init_machine(void) MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .init_time = ep93xx_timer_init, diff --git a/arch/arm/mach-ep93xx/gpio-ep93xx.h b/arch/arm/mach-ep93xx/gpio-ep93xx.h index 242af4a401ea..7b46eb7e5507 100644 --- a/arch/arm/mach-ep93xx/gpio-ep93xx.h +++ b/arch/arm/mach-ep93xx/gpio-ep93xx.h @@ -4,7 +4,7 @@ #ifndef __GPIO_EP93XX_H #define __GPIO_EP93XX_H -#include <mach/ep93xx-regs.h> +#include "ep93xx-regs.h" #define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000) #define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000) diff --git a/arch/arm/mach-ep93xx/include/mach/irqs.h b/arch/arm/mach-ep93xx/include/mach/irqs.h deleted file mode 100644 index 244daf83ce6d..000000000000 --- a/arch/arm/mach-ep93xx/include/mach/irqs.h +++ /dev/null @@ -1,79 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-ep93xx/include/mach/irqs.h - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#define IRQ_EP93XX_COMMRX 2 -#define IRQ_EP93XX_COMMTX 3 -#define IRQ_EP93XX_TIMER1 4 -#define IRQ_EP93XX_TIMER2 5 -#define IRQ_EP93XX_AACINTR 6 -#define IRQ_EP93XX_DMAM2P0 7 -#define IRQ_EP93XX_DMAM2P1 8 -#define IRQ_EP93XX_DMAM2P2 9 -#define IRQ_EP93XX_DMAM2P3 10 -#define IRQ_EP93XX_DMAM2P4 11 -#define IRQ_EP93XX_DMAM2P5 12 -#define IRQ_EP93XX_DMAM2P6 13 -#define IRQ_EP93XX_DMAM2P7 14 -#define IRQ_EP93XX_DMAM2P8 15 -#define IRQ_EP93XX_DMAM2P9 16 -#define IRQ_EP93XX_DMAM2M0 17 -#define IRQ_EP93XX_DMAM2M1 18 -#define IRQ_EP93XX_GPIO0MUX 19 -#define IRQ_EP93XX_GPIO1MUX 20 -#define IRQ_EP93XX_GPIO2MUX 21 -#define IRQ_EP93XX_GPIO3MUX 22 -#define IRQ_EP93XX_UART1RX 23 -#define IRQ_EP93XX_UART1TX 24 -#define IRQ_EP93XX_UART2RX 25 -#define IRQ_EP93XX_UART2TX 26 -#define IRQ_EP93XX_UART3RX 27 -#define IRQ_EP93XX_UART3TX 28 -#define IRQ_EP93XX_KEY 29 -#define IRQ_EP93XX_TOUCH 30 -#define EP93XX_VIC1_VALID_IRQ_MASK 0x7ffffffc - -#define IRQ_EP93XX_EXT0 32 -#define IRQ_EP93XX_EXT1 33 -#define IRQ_EP93XX_EXT2 34 -#define IRQ_EP93XX_64HZ 35 -#define IRQ_EP93XX_WATCHDOG 36 -#define IRQ_EP93XX_RTC 37 -#define IRQ_EP93XX_IRDA 38 -#define IRQ_EP93XX_ETHERNET 39 -#define IRQ_EP93XX_EXT3 40 -#define IRQ_EP93XX_PROG 41 -#define IRQ_EP93XX_1HZ 42 -#define IRQ_EP93XX_VSYNC 43 -#define IRQ_EP93XX_VIDEO_FIFO 44 -#define IRQ_EP93XX_SSP1RX 45 -#define IRQ_EP93XX_SSP1TX 46 -#define IRQ_EP93XX_GPIO4MUX 47 -#define IRQ_EP93XX_GPIO5MUX 48 -#define IRQ_EP93XX_GPIO6MUX 49 -#define IRQ_EP93XX_GPIO7MUX 50 -#define IRQ_EP93XX_TIMER3 51 -#define IRQ_EP93XX_UART1 52 -#define IRQ_EP93XX_SSP 53 -#define IRQ_EP93XX_UART2 54 -#define IRQ_EP93XX_UART3 55 -#define IRQ_EP93XX_USB 56 -#define IRQ_EP93XX_ETHERNET_PME 57 -#define IRQ_EP93XX_DSP 58 -#define IRQ_EP93XX_GPIO_AB 59 -#define IRQ_EP93XX_SAI 60 -#define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff - -#define NR_EP93XX_IRQS (64 + 24) - -#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x)) -#define EP93XX_BOARD_IRQS 32 - -#define NR_IRQS (NR_EP93XX_IRQS + EP93XX_BOARD_IRQS) - - -#endif diff --git a/arch/arm/mach-ep93xx/irqs.h b/arch/arm/mach-ep93xx/irqs.h new file mode 100644 index 000000000000..353201b90c66 --- /dev/null +++ b/arch/arm/mach-ep93xx/irqs.h @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +#define IRQ_EP93XX_VIC0 1 + +#define IRQ_EP93XX_COMMRX (IRQ_EP93XX_VIC0 + 2) +#define IRQ_EP93XX_COMMTX (IRQ_EP93XX_VIC0 + 3) +#define IRQ_EP93XX_TIMER1 (IRQ_EP93XX_VIC0 + 4) +#define IRQ_EP93XX_TIMER2 (IRQ_EP93XX_VIC0 + 5) +#define IRQ_EP93XX_AACINTR (IRQ_EP93XX_VIC0 + 6) +#define IRQ_EP93XX_DMAM2P0 (IRQ_EP93XX_VIC0 + 7) +#define IRQ_EP93XX_DMAM2P1 (IRQ_EP93XX_VIC0 + 8) +#define IRQ_EP93XX_DMAM2P2 (IRQ_EP93XX_VIC0 + 9) +#define IRQ_EP93XX_DMAM2P3 (IRQ_EP93XX_VIC0 + 10) +#define IRQ_EP93XX_DMAM2P4 (IRQ_EP93XX_VIC0 + 11) +#define IRQ_EP93XX_DMAM2P5 (IRQ_EP93XX_VIC0 + 12) +#define IRQ_EP93XX_DMAM2P6 (IRQ_EP93XX_VIC0 + 13) +#define IRQ_EP93XX_DMAM2P7 (IRQ_EP93XX_VIC0 + 14) +#define IRQ_EP93XX_DMAM2P8 (IRQ_EP93XX_VIC0 + 15) +#define IRQ_EP93XX_DMAM2P9 (IRQ_EP93XX_VIC0 + 16) +#define IRQ_EP93XX_DMAM2M0 (IRQ_EP93XX_VIC0 + 17) +#define IRQ_EP93XX_DMAM2M1 (IRQ_EP93XX_VIC0 + 18) +#define IRQ_EP93XX_GPIO0MUX (IRQ_EP93XX_VIC0 + 19) +#define IRQ_EP93XX_GPIO1MUX (IRQ_EP93XX_VIC0 + 20) +#define IRQ_EP93XX_GPIO2MUX (IRQ_EP93XX_VIC0 + 21) +#define IRQ_EP93XX_GPIO3MUX (IRQ_EP93XX_VIC0 + 22) +#define IRQ_EP93XX_UART1RX (IRQ_EP93XX_VIC0 + 23) +#define IRQ_EP93XX_UART1TX (IRQ_EP93XX_VIC0 + 24) +#define IRQ_EP93XX_UART2RX (IRQ_EP93XX_VIC0 + 25) +#define IRQ_EP93XX_UART2TX (IRQ_EP93XX_VIC0 + 26) +#define IRQ_EP93XX_UART3RX (IRQ_EP93XX_VIC0 + 27) +#define IRQ_EP93XX_UART3TX (IRQ_EP93XX_VIC0 + 28) +#define IRQ_EP93XX_KEY (IRQ_EP93XX_VIC0 + 29) +#define IRQ_EP93XX_TOUCH (IRQ_EP93XX_VIC0 + 30) +#define EP93XX_VIC1_VALID_IRQ_MASK 0x7ffffffc + +#define IRQ_EP93XX_VIC1 (IRQ_EP93XX_VIC0 + 32) + +#define IRQ_EP93XX_EXT0 (IRQ_EP93XX_VIC1 + 0) +#define IRQ_EP93XX_EXT1 (IRQ_EP93XX_VIC1 + 1) +#define IRQ_EP93XX_EXT2 (IRQ_EP93XX_VIC1 + 2) +#define IRQ_EP93XX_64HZ (IRQ_EP93XX_VIC1 + 3) +#define IRQ_EP93XX_WATCHDOG (IRQ_EP93XX_VIC1 + 4) +#define IRQ_EP93XX_RTC (IRQ_EP93XX_VIC1 + 5) +#define IRQ_EP93XX_IRDA (IRQ_EP93XX_VIC1 + 6) +#define IRQ_EP93XX_ETHERNET (IRQ_EP93XX_VIC1 + 7) +#define IRQ_EP93XX_EXT3 (IRQ_EP93XX_VIC1 + 8) +#define IRQ_EP93XX_PROG (IRQ_EP93XX_VIC1 + 9) +#define IRQ_EP93XX_1HZ (IRQ_EP93XX_VIC1 + 10) +#define IRQ_EP93XX_VSYNC (IRQ_EP93XX_VIC1 + 11) +#define IRQ_EP93XX_VIDEO_FIFO (IRQ_EP93XX_VIC1 + 12) +#define IRQ_EP93XX_SSP1RX (IRQ_EP93XX_VIC1 + 13) +#define IRQ_EP93XX_SSP1TX (IRQ_EP93XX_VIC1 + 14) +#define IRQ_EP93XX_GPIO4MUX (IRQ_EP93XX_VIC1 + 15) +#define IRQ_EP93XX_GPIO5MUX (IRQ_EP93XX_VIC1 + 16) +#define IRQ_EP93XX_GPIO6MUX (IRQ_EP93XX_VIC1 + 17) +#define IRQ_EP93XX_GPIO7MUX (IRQ_EP93XX_VIC1 + 18) +#define IRQ_EP93XX_TIMER3 (IRQ_EP93XX_VIC1 + 19) +#define IRQ_EP93XX_UART1 (IRQ_EP93XX_VIC1 + 20) +#define IRQ_EP93XX_SSP (IRQ_EP93XX_VIC1 + 21) +#define IRQ_EP93XX_UART2 (IRQ_EP93XX_VIC1 + 22) +#define IRQ_EP93XX_UART3 (IRQ_EP93XX_VIC1 + 23) +#define IRQ_EP93XX_USB (IRQ_EP93XX_VIC1 + 24) +#define IRQ_EP93XX_ETHERNET_PME (IRQ_EP93XX_VIC1 + 25) +#define IRQ_EP93XX_DSP (IRQ_EP93XX_VIC1 + 26) +#define IRQ_EP93XX_GPIO_AB (IRQ_EP93XX_VIC1 + 27) +#define IRQ_EP93XX_SAI (IRQ_EP93XX_VIC1 + 28) +#define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff + +#define NR_EP93XX_IRQS (IRQ_EP93XX_VIC1 + 32 + 24) + +#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x)) +#define EP93XX_BOARD_IRQS 32 + +#endif diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index e6ead8ded6ee..c121c459aa17 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -76,6 +76,7 @@ static void __init micro9_init_machine(void) MACHINE_START(MICRO9, "Contec Micro9-High") /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .init_time = ep93xx_timer_init, @@ -88,6 +89,7 @@ MACHINE_END MACHINE_START(MICRO9M, "Contec Micro9-Mid") /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .init_time = ep93xx_timer_init, @@ -100,6 +102,7 @@ MACHINE_END MACHINE_START(MICRO9L, "Contec Micro9-Lite") /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .init_time = ep93xx_timer_init, @@ -112,6 +115,7 @@ MACHINE_END MACHINE_START(MICRO9S, "Contec Micro9-Slim") /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .init_time = ep93xx_timer_init, diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index 5291053023b2..569e72413561 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -119,6 +119,7 @@ static void __init simone_init_machine(void) MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board") /* Maintainer: Ryan Mallon */ .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .init_time = ep93xx_timer_init, diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index e200d69471e9..1dfb725671b1 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -153,6 +153,7 @@ static void __init snappercl15_init_machine(void) MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15") /* Maintainer: Ryan Mallon */ .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .init_time = ep93xx_timer_init, diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h index 94ef7f275f94..3245ebbd5069 100644 --- a/arch/arm/mach-ep93xx/soc.h +++ b/arch/arm/mach-ep93xx/soc.h @@ -9,7 +9,8 @@ #ifndef _EP93XX_SOC_H #define _EP93XX_SOC_H -#include <mach/ep93xx-regs.h> +#include "ep93xx-regs.h" +#include "irqs.h" /* * EP93xx Physical Memory Map: diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 12eff8c8074d..d3de7283ecb3 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -22,7 +22,6 @@ #include "gpio-ep93xx.h" #include "hardware.h" -#include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -151,7 +150,7 @@ static struct platform_device ts72xx_nand_flash = { .num_resources = ARRAY_SIZE(ts72xx_nand_resource), }; -void __init ts72xx_register_flash(struct mtd_partition *parts, int n, +static void __init ts72xx_register_flash(struct mtd_partition *parts, int n, resource_size_t start) { /* @@ -350,6 +349,7 @@ static void __init ts72xx_init_machine(void) MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS, .map_io = ts72xx_map_io, .init_irq = ep93xx_init_irq, .init_time = ep93xx_timer_init, @@ -413,6 +413,7 @@ static void __init bk3_init_machine(void) MACHINE_START(BK3, "Liebherr controller BK3.1") /* Maintainer: Lukasz Majewski <lukma@denx.de> */ .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS, .map_io = ts72xx_map_io, .init_irq = ep93xx_init_irq, .init_time = ep93xx_timer_init, diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index e46281e60bf7..30d9cf3791eb 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -302,6 +302,7 @@ static void __init vision_init_machine(void) MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307") /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS + EP93XX_BOARD_IRQS, .map_io = vision_map_io, .init_irq = ep93xx_init_irq, .init_time = ep93xx_timer_init, diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index f7d993628cb7..4d3b40e4049a 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -8,7 +8,6 @@ menuconfig ARCH_EXYNOS bool "Samsung Exynos" depends on ARCH_MULTI_V7 - select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_GIC select EXYNOS_IRQ_COMBINER @@ -17,7 +16,6 @@ menuconfig ARCH_EXYNOS select EXYNOS_PMU select EXYNOS_SROM select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS - select GPIOLIB select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5 select HAVE_ARM_SCU if SMP select PINCTRL diff --git a/arch/arm/mach-gemini/Kconfig b/arch/arm/mach-gemini/Kconfig index 969674ea5f17..f436a2009eca 100644 --- a/arch/arm/mach-gemini/Kconfig +++ b/arch/arm/mach-gemini/Kconfig @@ -2,6 +2,7 @@ menuconfig ARCH_GEMINI bool "Cortina Systems Gemini" depends on ARCH_MULTI_V4 + depends on CPU_LITTLE_ENDIAN select ARCH_HAS_RESET_CONTROLLER select ARM_AMBA select ARM_APPENDED_DTB # Old Redboot bootloaders deployed diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 9de38ce8124f..c2d6ef6b3927 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -2,7 +2,6 @@ config ARCH_HIGHBANK bool "Calxeda ECX-1000/2000 (Highbank/Midway)" depends on ARCH_MULTI_V7 - select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig index 2e980f834a6a..75cccbd3f05f 100644 --- a/arch/arm/mach-hisi/Kconfig +++ b/arch/arm/mach-hisi/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config ARCH_HISI bool "Hisilicon SoC Support" - depends on ARCH_MULTI_V7 || ARCH_MULTI_V5 + depends on ARCH_MULTI_V7 || (ARCH_MULTI_V5 && CPU_LITTLE_ENDIAN) select ARM_AMBA select ARM_GIC if ARCH_MULTI_V7 select ARM_TIMER_SP804 diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c index a56cc64deeb8..9ce93e0b6cdc 100644 --- a/arch/arm/mach-hisi/platsmp.c +++ b/arch/arm/mach-hisi/platsmp.c @@ -67,14 +67,17 @@ static void __init hi3xxx_smp_prepare_cpus(unsigned int max_cpus) } ctrl_base = of_iomap(np, 0); if (!ctrl_base) { + of_node_put(np); pr_err("failed to map address\n"); return; } if (of_property_read_u32(np, "smp-offset", &offset) < 0) { + of_node_put(np); pr_err("failed to find smp-offset property\n"); return; } ctrl_base += offset; + of_node_put(np); } } @@ -160,6 +163,7 @@ static int hip01_boot_secondary(unsigned int cpu, struct task_struct *idle) if (WARN_ON(!node)) return -1; ctrl_base = of_iomap(node, 0); + of_node_put(node); /* set the secondary core boot from DDR */ remap_reg_value = readl_relaxed(ctrl_base + REG_SC_CTRL); diff --git a/arch/arm/mach-hpe/Kconfig b/arch/arm/mach-hpe/Kconfig new file mode 100644 index 000000000000..3372bbf38d38 --- /dev/null +++ b/arch/arm/mach-hpe/Kconfig @@ -0,0 +1,23 @@ +menuconfig ARCH_HPE + bool "HPE SoC support" + depends on ARCH_MULTI_V7 + help + This enables support for HPE ARM based BMC chips. +if ARCH_HPE + +config ARCH_HPE_GXP + bool "HPE GXP SoC" + depends on ARCH_MULTI_V7 + select ARM_VIC + select GENERIC_IRQ_CHIP + select CLKSRC_MMIO + help + HPE GXP is the name of the HPE Soc. This SoC is used to implement many + BMC features at HPE. It supports ARMv7 architecture based on the Cortex + A9 core. It is capable of using an AXI bus to which a memory controller + is attached. It has multiple SPI interfaces to connect boot flash and + BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It + has multiple i2c engines to drive connectivity with a host + infrastructure. + +endif diff --git a/arch/arm/mach-hpe/Makefile b/arch/arm/mach-hpe/Makefile new file mode 100644 index 000000000000..8b0a91234df4 --- /dev/null +++ b/arch/arm/mach-hpe/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ARCH_HPE_GXP) += gxp.o diff --git a/arch/arm/mach-hpe/gxp.c b/arch/arm/mach-hpe/gxp.c new file mode 100644 index 000000000000..ef3341373006 --- /dev/null +++ b/arch/arm/mach-hpe/gxp.c @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */ + +#include <linux/of_platform.h> +#include <asm/mach/arch.h> + +static const char * const gxp_board_dt_compat[] = { + "hpe,gxp", + NULL, +}; + +DT_MACHINE_START(GXP_DT, "HPE GXP") + .dt_compat = gxp_board_dt_compat, + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, +MACHINE_END diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index c5a59158722b..696c59fe4588 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_MXC bool "Freescale i.MX family" - depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M - select ARCH_SUPPORTS_BIG_ENDIAN + depends on (ARCH_MULTI_V4_V5 && CPU_LITTLE_ENDIAN) || \ + ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M select CLKSRC_IMX_GPT select GENERIC_IRQ_CHIP select GPIOLIB diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig deleted file mode 100644 index d61ea616cf8e..000000000000 --- a/arch/arm/mach-integrator/Kconfig +++ /dev/null @@ -1,125 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -menuconfig ARCH_INTEGRATOR - bool "ARM Ltd. Integrator family" - depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6 - select ARM_AMBA - select CMA - select DMA_CMA - select HAVE_TCM - select CLK_ICST - select MFD_SYSCON - select PLAT_VERSATILE - select POWER_RESET - select POWER_RESET_VERSATILE - select POWER_SUPPLY - select SOC_INTEGRATOR_CM - select VERSATILE_FPGA_IRQ - help - Support for ARM's Integrator platform. - -if ARCH_INTEGRATOR - -config ARCH_INTEGRATOR_AP - bool "Support Integrator/AP and Integrator/PP2 platforms" - select INTEGRATOR_AP_TIMER - select SERIAL_AMBA_PL010 if TTY - select SERIAL_AMBA_PL010_CONSOLE if TTY - select SOC_BUS - help - Include support for the ARM(R) Integrator/AP and - Integrator/PP2 platforms. - -config INTEGRATOR_IMPD1 - bool "Include support for Integrator/IM-PD1" - depends on ARCH_INTEGRATOR_AP - select ARM_VIC - select GPIO_PL061 - select GPIOLIB - select REGULATOR - select REGULATOR_FIXED_VOLTAGE - help - The IM-PD1 is an add-on logic module for the Integrator which - allows ARM(R) Ltd PrimeCells to be developed and evaluated. - The IM-PD1 can be found on the Integrator/PP2 platform. - -config INTEGRATOR_CM720T - bool "Integrator/CM720T core module" - depends on ARCH_INTEGRATOR_AP - depends on ARCH_MULTI_V4T - select CPU_ARM720T - -config INTEGRATOR_CM920T - bool "Integrator/CM920T core module" - depends on ARCH_INTEGRATOR_AP - depends on ARCH_MULTI_V4T - select CPU_ARM920T - -config INTEGRATOR_CM922T_XA10 - bool "Integrator/CM922T-XA10 core module" - depends on ARCH_MULTI_V4T - depends on ARCH_INTEGRATOR_AP - select CPU_ARM922T - -config INTEGRATOR_CM926EJS - bool "Integrator/CM926EJ-S core module" - depends on ARCH_INTEGRATOR_AP - depends on ARCH_MULTI_V5 - select CPU_ARM926T - -config INTEGRATOR_CM10200E_REV0 - bool "Integrator/CM10200E rev.0 core module" - depends on ARCH_INTEGRATOR_AP && n - depends on ARCH_MULTI_V5 - select CPU_ARM1020 - -config INTEGRATOR_CM10200E - bool "Integrator/CM10200E core module" - depends on ARCH_INTEGRATOR_AP && n - depends on ARCH_MULTI_V5 - select CPU_ARM1020E - -config INTEGRATOR_CM10220E - bool "Integrator/CM10220E core module" - depends on ARCH_INTEGRATOR_AP - depends on ARCH_MULTI_V5 - select CPU_ARM1022 - -config INTEGRATOR_CM1026EJS - bool "Integrator/CM1026EJ-S core module" - depends on ARCH_INTEGRATOR_AP - depends on ARCH_MULTI_V5 - select CPU_ARM1026 - -config INTEGRATOR_CM1136JFS - bool "Integrator/CM1136JF-S core module" - depends on ARCH_INTEGRATOR_AP - depends on ARCH_MULTI_V6 - select CPU_V6 - -config ARCH_INTEGRATOR_CP - bool "Support Integrator/CP platform" - depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 - select ARM_TIMER_SP804 - select SERIAL_AMBA_PL011 if TTY - select SERIAL_AMBA_PL011_CONSOLE if TTY - select SOC_BUS - help - Include support for the ARM(R) Integrator CP platform. - -config INTEGRATOR_CT926 - bool "Integrator/CT926 (ARM926EJ-S) core tile" - depends on ARCH_INTEGRATOR_CP - depends on ARCH_MULTI_V5 - select CPU_ARM926T - -config INTEGRATOR_CTB36 - bool "Integrator/CTB36 (ARM1136JF-S) core tile" - depends on ARCH_INTEGRATOR_CP - depends on ARCH_MULTI_V6 - select CPU_V6 - -config ARCH_CINTEGRATOR - depends on ARCH_INTEGRATOR_CP - def_bool y - -endif diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile deleted file mode 100644 index 7857a55c90b0..000000000000 --- a/arch/arm/mach-integrator/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y := core.o -obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o -obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig index f1f342cb0509..01f60a8e6404 100644 --- a/arch/arm/mach-iop32x/Kconfig +++ b/arch/arm/mach-iop32x/Kconfig @@ -1,9 +1,17 @@ # SPDX-License-Identifier: GPL-2.0 -if ARCH_IOP32X - -menu "IOP32x Implementation Options" +menuconfig ARCH_IOP32X + bool "IOP32x-based platforms" + depends on ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN + select CPU_XSCALE + select GPIO_IOP + select GPIOLIB + select FORCE_PCI + help + Support for Intel's 80219 and IOP32X (XScale) family of + processors. -comment "IOP32x Platform Types" +if ARCH_IOP32X config MACH_EP80219 bool @@ -42,6 +50,4 @@ config MACH_EM7210 board. Say also Y here if you have a SS4000e Baxter Creek NAS appliance." -endmenu - endif diff --git a/arch/arm/mach-iop32x/cp6.c b/arch/arm/mach-iop32x/cp6.c index 2882674a1c39..7135a0ac9949 100644 --- a/arch/arm/mach-iop32x/cp6.c +++ b/arch/arm/mach-iop32x/cp6.c @@ -7,6 +7,8 @@ #include <asm/traps.h> #include <asm/ptrace.h> +#include "iop3xx.h" + void iop_enable_cp6(void) { u32 temp; diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c index d43ced3cd4e7..ac130aba5a6e 100644 --- a/arch/arm/mach-iop32x/em7210.c +++ b/arch/arm/mach-iop32x/em7210.c @@ -223,6 +223,7 @@ static void __init em7210_init_machine(void) MACHINE_START(EM7210, "Lanner EM7210") .atag_offset = 0x100, + .nr_irqs = IOP32X_NR_IRQS, .map_io = em7210_map_io, .init_irq = iop32x_init_irq, .init_time = em7210_timer_init, diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c index 2fe0f77d1f1d..cd6e7da2ea10 100644 --- a/arch/arm/mach-iop32x/glantank.c +++ b/arch/arm/mach-iop32x/glantank.c @@ -205,6 +205,7 @@ static void __init glantank_init_machine(void) MACHINE_START(GLANTANK, "GLAN Tank") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ .atag_offset = 0x100, + .nr_irqs = IOP32X_NR_IRQS, .map_io = glantank_map_io, .init_irq = iop32x_init_irq, .init_time = glantank_timer_init, diff --git a/arch/arm/mach-iop32x/include/mach/irqs.h b/arch/arm/mach-iop32x/include/mach/irqs.h deleted file mode 100644 index e09ae5f48aec..000000000000 --- a/arch/arm/mach-iop32x/include/mach/irqs.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-iop32x/include/mach/irqs.h - * - * Author: Rory Bolt <rorybolt@pacbell.net> - * Copyright: (C) 2002 Rory Bolt - */ - -#ifndef __IRQS_H -#define __IRQS_H - -#define NR_IRQS 33 - -#endif diff --git a/arch/arm/mach-iop32x/include/mach/uncompress.h b/arch/arm/mach-iop32x/include/mach/uncompress.h deleted file mode 100644 index c8548875d942..000000000000 --- a/arch/arm/mach-iop32x/include/mach/uncompress.h +++ /dev/null @@ -1,25 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-iop32x/include/mach/uncompress.h - */ - -#include <asm/types.h> -#include <asm/mach-types.h> -#include <linux/serial_reg.h> - -#define uart_base ((volatile u8 *)0xfe800000) - -#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) - -static inline void putc(char c) -{ - while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) - barrier(); - uart_base[UART_TX] = c; -} - -static inline void flush(void) -{ -} - -#define arch_decomp_setup() do { } while (0) diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c index 49caaa703881..8b4c29d17265 100644 --- a/arch/arm/mach-iop32x/iq31244.c +++ b/arch/arm/mach-iop32x/iq31244.c @@ -324,6 +324,7 @@ MACHINE_END MACHINE_START(EP80219, "Intel EP80219") /* Maintainer: Intel Corp. */ .atag_offset = 0x100, + .nr_irqs = IOP32X_NR_IRQS, .map_io = iq31244_map_io, .init_irq = iop32x_init_irq, .init_time = iq31244_timer_init, diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c index b455d7073296..d9780c4660cb 100644 --- a/arch/arm/mach-iop32x/iq80321.c +++ b/arch/arm/mach-iop32x/iq80321.c @@ -183,6 +183,7 @@ static void __init iq80321_init_machine(void) MACHINE_START(IQ80321, "Intel IQ80321") /* Maintainer: Intel Corp. */ .atag_offset = 0x100, + .nr_irqs = IOP32X_NR_IRQS, .map_io = iq80321_map_io, .init_irq = iop32x_init_irq, .init_time = iq80321_timer_init, diff --git a/arch/arm/mach-iop32x/irqs.h b/arch/arm/mach-iop32x/irqs.h index e1dfc8b4e7d7..e9fc88e09189 100644 --- a/arch/arm/mach-iop32x/irqs.h +++ b/arch/arm/mach-iop32x/irqs.h @@ -43,4 +43,6 @@ #define IRQ_IOP32X_XINT3 IOP_IRQ(30) #define IRQ_IOP32X_HPI IOP_IRQ(31) +#define IOP32X_NR_IRQS (IRQ_IOP32X_HPI + 1) + #endif diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index bf99e718f8b8..bb1e2e11bf35 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -358,6 +358,7 @@ static void __init n2100_init_machine(void) MACHINE_START(N2100, "Thecus N2100") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ .atag_offset = 0x100, + .nr_irqs = IOP32X_NR_IRQS, .map_io = n2100_map_io, .init_irq = iop32x_init_irq, .init_time = n2100_timer_init, diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index f41ba3f42fc8..cb46802f5ce5 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -1,22 +1,19 @@ # SPDX-License-Identifier: GPL-2.0-only -if ARCH_IXP4XX - -menu "Intel IXP4xx Implementation Options" - -comment "IXP4xx Platforms" - -config MACH_IXP4XX_OF - bool - prompt "Device Tree IXP4xx boards" - default y +menuconfig ARCH_IXP4XX + bool "IXP4xx-based platforms" + depends on ARCH_MULTI_V5 + depends on CPU_BIG_ENDIAN select ARM_APPENDED_DTB # Old Redboot bootloaders deployed + select CPU_XSCALE + select GPIO_IXP4XX + select GPIOLIB + select FORCE_PCI select I2C select I2C_IOP3XX - select PCI + select IXP4XX_IRQ + select IXP4XX_TIMER + select USB_EHCI_BIG_ENDIAN_DESC + select USB_EHCI_BIG_ENDIAN_MMIO select USE_OF help - Say 'Y' here to support Device Tree-based IXP4xx platforms. - -endmenu - -endif + Support for Intel's IXP4XX (XScale) family of processors. diff --git a/arch/arm/mach-ixp4xx/Makefile.boot b/arch/arm/mach-ixp4xx/Makefile.boot deleted file mode 100644 index 9b015bd1ef27..000000000000 --- a/arch/arm/mach-ixp4xx/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 - diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h deleted file mode 100644 index 09e7663e6a55..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h +++ /dev/null @@ -1,54 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ixp4xx/include/mach/uncompress.h - * - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - */ - -#ifndef _ARCH_UNCOMPRESS_H_ -#define _ARCH_UNCOMPRESS_H_ - -#include <asm/mach-types.h> -#include <linux/serial_reg.h> - -#define IXP4XX_UART1_BASE_PHYS 0xc8000000 -#define IXP4XX_UART2_BASE_PHYS 0xc8001000 - -#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE) - -volatile u32* uart_base; - -static inline void putc(int c) -{ - /* Check THRE and TEMT bits before we transmit the character. - */ - while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) - barrier(); - - *uart_base = c; -} - -static void flush(void) -{ -} - -static __inline__ void __arch_decomp_setup(unsigned long arch_id) -{ - /* - * Some boards are using UART2 as console - */ - if (machine_is_adi_coyote() || machine_is_gtwx5715() || - machine_is_gateway7001() || machine_is_wg302v2() || - machine_is_devixp() || machine_is_miccpt() || machine_is_mic256()) - uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; - else - uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; -} - -/* - * arch_id is a variable in decompress_kernel() - */ -#define arch_decomp_setup() __arch_decomp_setup(arch_id) - -#endif diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig index cfd39f729f8e..de69cc2dd483 100644 --- a/arch/arm/mach-keystone/Kconfig +++ b/arch/arm/mach-keystone/Kconfig @@ -8,7 +8,6 @@ config ARCH_KEYSTONE select ARCH_HAS_RESET_CONTROLLER select ARM_ERRATA_798181 if SMP select COMMON_CLK_KEYSTONE - select ARCH_SUPPORTS_BIG_ENDIAN select ZONE_DMA if ARM_LPAE select PINCTRL select PM_GENERIC_DOMAINS if PM diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig index ec87c65f4536..35730d3696d0 100644 --- a/arch/arm/mach-lpc32xx/Kconfig +++ b/arch/arm/mach-lpc32xx/Kconfig @@ -3,6 +3,7 @@ config ARCH_LPC32XX bool "NXP LPC32XX" depends on ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN select ARM_AMBA select CLKSRC_LPC32XX select CPU_ARM926T diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig index 9e0f592d87d8..35a3430c7942 100644 --- a/arch/arm/mach-mediatek/Kconfig +++ b/arch/arm/mach-mediatek/Kconfig @@ -30,6 +30,7 @@ config MACH_MT7623 config MACH_MT7629 bool "MediaTek MT7629 SoCs support" default ARCH_MEDIATEK + select HAVE_ARM_ARCH_TIMER config MACH_MT8127 bool "MediaTek MT8127 SoCs support" diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 0dd999212944..333229c65b28 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_MMP bool "Marvell PXA168/910/MMP2/MMP3" - depends on ARCH_MULTI_V5 || ARCH_MULTI_V7 + depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V7 select GPIO_PXA select GPIOLIB select PINCTRL @@ -39,16 +39,8 @@ config MACH_AVENGERS_LITE Say 'Y' here if you want to support the Marvell PXA168-based Avengers Lite Development Board. -config MACH_TAVOREVB - bool "Marvell's PXA910 TavorEVB Development Board" - depends on ARCH_MULTI_V5 - select CPU_PXA910 - help - Say 'Y' here if you want to support the Marvell PXA910-based - TavorEVB Development Board. - config MACH_TTC_DKB - bool "Marvell's PXA910 TavorEVB Development Board" + bool "Marvell's PXA910 TavorEVB/TTC_DKB Development Board" depends on ARCH_MULTI_V5 select CPU_PXA910 help diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index e3758f7e1fe7..539d750aaf10 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -2,8 +2,6 @@ # # Makefile for Marvell's PXA168 processors line # -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-pxa/include - obj-y += common.o devices.o time.o # SoC support @@ -24,7 +22,6 @@ endif obj-$(CONFIG_MACH_ASPENITE) += aspenite.o obj-$(CONFIG_MACH_ZYLONITE2) += aspenite.o obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o -obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o obj-$(CONFIG_MACH_TTC_DKB) += ttc_dkb.o obj-$(CONFIG_MACH_BROWNSTONE) += brownstone.o obj-$(CONFIG_MACH_FLINT) += flint.o diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c index 18bee66a671f..79f4a2aa5475 100644 --- a/arch/arm/mach-mmp/devices.c +++ b/arch/arm/mach-mmp/devices.c @@ -14,7 +14,7 @@ #include <linux/soc/mmp/cputype.h> #include "regs-usb.h" -int __init pxa_register_device(struct pxa_device_desc *desc, +int __init mmp_register_device(struct mmp_device_desc *desc, void *data, size_t size) { struct platform_device *pdev; diff --git a/arch/arm/mach-mmp/devices.h b/arch/arm/mach-mmp/devices.h index 4df596c5c201..d4920ebfebc5 100644 --- a/arch/arm/mach-mmp/devices.h +++ b/arch/arm/mach-mmp/devices.h @@ -7,7 +7,7 @@ #define MAX_RESOURCE_DMA 2 /* structure for describing the on-chip devices */ -struct pxa_device_desc { +struct mmp_device_desc { const char *dev_name; const char *drv_name; int id; @@ -18,7 +18,7 @@ struct pxa_device_desc { }; #define PXA168_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...) \ -struct pxa_device_desc pxa168_device_##_name __initdata = { \ +struct mmp_device_desc pxa168_device_##_name __initdata = { \ .dev_name = "pxa168-" #_name, \ .drv_name = _drv, \ .id = _id, \ @@ -29,7 +29,7 @@ struct pxa_device_desc pxa168_device_##_name __initdata = { \ }; #define PXA910_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...) \ -struct pxa_device_desc pxa910_device_##_name __initdata = { \ +struct mmp_device_desc pxa910_device_##_name __initdata = { \ .dev_name = "pxa910-" #_name, \ .drv_name = _drv, \ .id = _id, \ @@ -40,7 +40,7 @@ struct pxa_device_desc pxa910_device_##_name __initdata = { \ }; #define MMP2_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...) \ -struct pxa_device_desc mmp2_device_##_name __initdata = { \ +struct mmp_device_desc mmp2_device_##_name __initdata = { \ .dev_name = "mmp2-" #_name, \ .drv_name = _drv, \ .id = _id, \ @@ -50,7 +50,7 @@ struct pxa_device_desc mmp2_device_##_name __initdata = { \ .dma = { _dma }, \ } -extern int pxa_register_device(struct pxa_device_desc *, void *, size_t); +extern int mmp_register_device(struct mmp_device_desc *, void *, size_t); extern int pxa_usb_phy_init(void __iomem *phy_reg); extern void pxa_usb_phy_deinit(void __iomem *phy_reg); diff --git a/arch/arm/mach-mmp/mfp.h b/arch/arm/mach-mmp/mfp.h index 75a4acb33b1b..6f3057987756 100644 --- a/arch/arm/mach-mmp/mfp.h +++ b/arch/arm/mach-mmp/mfp.h @@ -2,7 +2,7 @@ #ifndef __ASM_MACH_MFP_H #define __ASM_MACH_MFP_H -#include <plat/mfp.h> +#include <linux/soc/pxa/mfp.h> /* * NOTE: the MFPR register bit definitions on PXA168 processor lines are a diff --git a/arch/arm/mach-mmp/mmp2.h b/arch/arm/mach-mmp/mmp2.h index adafc4fba8f4..3ebc1bb13f71 100644 --- a/arch/arm/mach-mmp/mmp2.h +++ b/arch/arm/mach-mmp/mmp2.h @@ -15,28 +15,28 @@ extern void mmp2_clear_pmic_int(void); #include "devices.h" -extern struct pxa_device_desc mmp2_device_uart1; -extern struct pxa_device_desc mmp2_device_uart2; -extern struct pxa_device_desc mmp2_device_uart3; -extern struct pxa_device_desc mmp2_device_uart4; -extern struct pxa_device_desc mmp2_device_twsi1; -extern struct pxa_device_desc mmp2_device_twsi2; -extern struct pxa_device_desc mmp2_device_twsi3; -extern struct pxa_device_desc mmp2_device_twsi4; -extern struct pxa_device_desc mmp2_device_twsi5; -extern struct pxa_device_desc mmp2_device_twsi6; -extern struct pxa_device_desc mmp2_device_sdh0; -extern struct pxa_device_desc mmp2_device_sdh1; -extern struct pxa_device_desc mmp2_device_sdh2; -extern struct pxa_device_desc mmp2_device_sdh3; -extern struct pxa_device_desc mmp2_device_asram; -extern struct pxa_device_desc mmp2_device_isram; +extern struct mmp_device_desc mmp2_device_uart1; +extern struct mmp_device_desc mmp2_device_uart2; +extern struct mmp_device_desc mmp2_device_uart3; +extern struct mmp_device_desc mmp2_device_uart4; +extern struct mmp_device_desc mmp2_device_twsi1; +extern struct mmp_device_desc mmp2_device_twsi2; +extern struct mmp_device_desc mmp2_device_twsi3; +extern struct mmp_device_desc mmp2_device_twsi4; +extern struct mmp_device_desc mmp2_device_twsi5; +extern struct mmp_device_desc mmp2_device_twsi6; +extern struct mmp_device_desc mmp2_device_sdh0; +extern struct mmp_device_desc mmp2_device_sdh1; +extern struct mmp_device_desc mmp2_device_sdh2; +extern struct mmp_device_desc mmp2_device_sdh3; +extern struct mmp_device_desc mmp2_device_asram; +extern struct mmp_device_desc mmp2_device_isram; extern struct platform_device mmp2_device_gpio; static inline int mmp2_add_uart(int id) { - struct pxa_device_desc *d = NULL; + struct mmp_device_desc *d = NULL; switch (id) { case 1: d = &mmp2_device_uart1; break; @@ -47,13 +47,13 @@ static inline int mmp2_add_uart(int id) return -EINVAL; } - return pxa_register_device(d, NULL, 0); + return mmp_register_device(d, NULL, 0); } static inline int mmp2_add_twsi(int id, struct i2c_pxa_platform_data *data, struct i2c_board_info *info, unsigned size) { - struct pxa_device_desc *d = NULL; + struct mmp_device_desc *d = NULL; int ret; switch (id) { @@ -71,12 +71,12 @@ static inline int mmp2_add_twsi(int id, struct i2c_pxa_platform_data *data, if (ret) return ret; - return pxa_register_device(d, data, sizeof(*data)); + return mmp_register_device(d, data, sizeof(*data)); } static inline int mmp2_add_sdhost(int id, struct sdhci_pxa_platdata *data) { - struct pxa_device_desc *d = NULL; + struct mmp_device_desc *d = NULL; switch (id) { case 0: d = &mmp2_device_sdh0; break; @@ -87,17 +87,17 @@ static inline int mmp2_add_sdhost(int id, struct sdhci_pxa_platdata *data) return -EINVAL; } - return pxa_register_device(d, data, sizeof(*data)); + return mmp_register_device(d, data, sizeof(*data)); } static inline int mmp2_add_asram(struct sram_platdata *data) { - return pxa_register_device(&mmp2_device_asram, data, sizeof(*data)); + return mmp_register_device(&mmp2_device_asram, data, sizeof(*data)); } static inline int mmp2_add_isram(struct sram_platdata *data) { - return pxa_register_device(&mmp2_device_isram, data, sizeof(*data)); + return mmp_register_device(&mmp2_device_isram, data, sizeof(*data)); } #endif /* __ASM_MACH_MMP2_H */ diff --git a/arch/arm/mach-mmp/pxa168.h b/arch/arm/mach-mmp/pxa168.h index dff651b9f252..34f907cd165a 100644 --- a/arch/arm/mach-mmp/pxa168.h +++ b/arch/arm/mach-mmp/pxa168.h @@ -21,24 +21,24 @@ extern void pxa168_clear_keypad_wakeup(void); #include "devices.h" -extern struct pxa_device_desc pxa168_device_uart1; -extern struct pxa_device_desc pxa168_device_uart2; -extern struct pxa_device_desc pxa168_device_uart3; -extern struct pxa_device_desc pxa168_device_twsi0; -extern struct pxa_device_desc pxa168_device_twsi1; -extern struct pxa_device_desc pxa168_device_pwm1; -extern struct pxa_device_desc pxa168_device_pwm2; -extern struct pxa_device_desc pxa168_device_pwm3; -extern struct pxa_device_desc pxa168_device_pwm4; -extern struct pxa_device_desc pxa168_device_ssp1; -extern struct pxa_device_desc pxa168_device_ssp2; -extern struct pxa_device_desc pxa168_device_ssp3; -extern struct pxa_device_desc pxa168_device_ssp4; -extern struct pxa_device_desc pxa168_device_ssp5; -extern struct pxa_device_desc pxa168_device_nand; -extern struct pxa_device_desc pxa168_device_fb; -extern struct pxa_device_desc pxa168_device_keypad; -extern struct pxa_device_desc pxa168_device_eth; +extern struct mmp_device_desc pxa168_device_uart1; +extern struct mmp_device_desc pxa168_device_uart2; +extern struct mmp_device_desc pxa168_device_uart3; +extern struct mmp_device_desc pxa168_device_twsi0; +extern struct mmp_device_desc pxa168_device_twsi1; +extern struct mmp_device_desc pxa168_device_pwm1; +extern struct mmp_device_desc pxa168_device_pwm2; +extern struct mmp_device_desc pxa168_device_pwm3; +extern struct mmp_device_desc pxa168_device_pwm4; +extern struct mmp_device_desc pxa168_device_ssp1; +extern struct mmp_device_desc pxa168_device_ssp2; +extern struct mmp_device_desc pxa168_device_ssp3; +extern struct mmp_device_desc pxa168_device_ssp4; +extern struct mmp_device_desc pxa168_device_ssp5; +extern struct mmp_device_desc pxa168_device_nand; +extern struct mmp_device_desc pxa168_device_fb; +extern struct mmp_device_desc pxa168_device_keypad; +extern struct mmp_device_desc pxa168_device_eth; /* pdata can be NULL */ extern int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata); @@ -48,7 +48,7 @@ extern struct platform_device pxa168_device_gpio; static inline int pxa168_add_uart(int id) { - struct pxa_device_desc *d = NULL; + struct mmp_device_desc *d = NULL; switch (id) { case 1: d = &pxa168_device_uart1; break; @@ -59,13 +59,13 @@ static inline int pxa168_add_uart(int id) if (d == NULL) return -EINVAL; - return pxa_register_device(d, NULL, 0); + return mmp_register_device(d, NULL, 0); } static inline int pxa168_add_twsi(int id, struct i2c_pxa_platform_data *data, struct i2c_board_info *info, unsigned size) { - struct pxa_device_desc *d = NULL; + struct mmp_device_desc *d = NULL; int ret; switch (id) { @@ -79,12 +79,12 @@ static inline int pxa168_add_twsi(int id, struct i2c_pxa_platform_data *data, if (ret) return ret; - return pxa_register_device(d, data, sizeof(*data)); + return mmp_register_device(d, data, sizeof(*data)); } static inline int pxa168_add_pwm(int id) { - struct pxa_device_desc *d = NULL; + struct mmp_device_desc *d = NULL; switch (id) { case 1: d = &pxa168_device_pwm1; break; @@ -95,12 +95,12 @@ static inline int pxa168_add_pwm(int id) return -EINVAL; } - return pxa_register_device(d, NULL, 0); + return mmp_register_device(d, NULL, 0); } static inline int pxa168_add_ssp(int id) { - struct pxa_device_desc *d = NULL; + struct mmp_device_desc *d = NULL; switch (id) { case 1: d = &pxa168_device_ssp1; break; @@ -111,17 +111,17 @@ static inline int pxa168_add_ssp(int id) default: return -EINVAL; } - return pxa_register_device(d, NULL, 0); + return mmp_register_device(d, NULL, 0); } static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info) { - return pxa_register_device(&pxa168_device_nand, info, sizeof(*info)); + return mmp_register_device(&pxa168_device_nand, info, sizeof(*info)); } static inline int pxa168_add_fb(struct pxa168fb_mach_info *mi) { - return pxa_register_device(&pxa168_device_fb, mi, sizeof(*mi)); + return mmp_register_device(&pxa168_device_fb, mi, sizeof(*mi)); } static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data) @@ -129,11 +129,11 @@ static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data) if (cpu_is_pxa168()) data->clear_wakeup_event = pxa168_clear_keypad_wakeup; - return pxa_register_device(&pxa168_device_keypad, data, sizeof(*data)); + return mmp_register_device(&pxa168_device_keypad, data, sizeof(*data)); } static inline int pxa168_add_eth(struct pxa168_eth_platform_data *data) { - return pxa_register_device(&pxa168_device_eth, data, sizeof(*data)); + return mmp_register_device(&pxa168_device_eth, data, sizeof(*data)); } #endif /* __ASM_MACH_PXA168_H */ diff --git a/arch/arm/mach-mmp/pxa910.h b/arch/arm/mach-mmp/pxa910.h index 2dfe38e4acc1..6ace5a8aa15b 100644 --- a/arch/arm/mach-mmp/pxa910.h +++ b/arch/arm/mach-mmp/pxa910.h @@ -13,28 +13,28 @@ extern void __init pxa910_init_irq(void); #include "devices.h" -extern struct pxa_device_desc pxa910_device_uart1; -extern struct pxa_device_desc pxa910_device_uart2; -extern struct pxa_device_desc pxa910_device_twsi0; -extern struct pxa_device_desc pxa910_device_twsi1; -extern struct pxa_device_desc pxa910_device_pwm1; -extern struct pxa_device_desc pxa910_device_pwm2; -extern struct pxa_device_desc pxa910_device_pwm3; -extern struct pxa_device_desc pxa910_device_pwm4; -extern struct pxa_device_desc pxa910_device_nand; +extern struct mmp_device_desc pxa910_device_uart1; +extern struct mmp_device_desc pxa910_device_uart2; +extern struct mmp_device_desc pxa910_device_twsi0; +extern struct mmp_device_desc pxa910_device_twsi1; +extern struct mmp_device_desc pxa910_device_pwm1; +extern struct mmp_device_desc pxa910_device_pwm2; +extern struct mmp_device_desc pxa910_device_pwm3; +extern struct mmp_device_desc pxa910_device_pwm4; +extern struct mmp_device_desc pxa910_device_nand; extern struct platform_device pxa168_device_usb_phy; extern struct platform_device pxa168_device_u2o; extern struct platform_device pxa168_device_u2ootg; extern struct platform_device pxa168_device_u2oehci; -extern struct pxa_device_desc pxa910_device_disp; -extern struct pxa_device_desc pxa910_device_fb; -extern struct pxa_device_desc pxa910_device_panel; +extern struct mmp_device_desc pxa910_device_disp; +extern struct mmp_device_desc pxa910_device_fb; +extern struct mmp_device_desc pxa910_device_panel; extern struct platform_device pxa910_device_gpio; extern struct platform_device pxa910_device_rtc; static inline int pxa910_add_uart(int id) { - struct pxa_device_desc *d = NULL; + struct mmp_device_desc *d = NULL; switch (id) { case 1: d = &pxa910_device_uart1; break; @@ -44,13 +44,13 @@ static inline int pxa910_add_uart(int id) if (d == NULL) return -EINVAL; - return pxa_register_device(d, NULL, 0); + return mmp_register_device(d, NULL, 0); } static inline int pxa910_add_twsi(int id, struct i2c_pxa_platform_data *data, struct i2c_board_info *info, unsigned size) { - struct pxa_device_desc *d = NULL; + struct mmp_device_desc *d = NULL; int ret; switch (id) { @@ -64,12 +64,12 @@ static inline int pxa910_add_twsi(int id, struct i2c_pxa_platform_data *data, if (ret) return ret; - return pxa_register_device(d, data, sizeof(*data)); + return mmp_register_device(d, data, sizeof(*data)); } static inline int pxa910_add_pwm(int id) { - struct pxa_device_desc *d = NULL; + struct mmp_device_desc *d = NULL; switch (id) { case 1: d = &pxa910_device_pwm1; break; @@ -80,11 +80,11 @@ static inline int pxa910_add_pwm(int id) return -EINVAL; } - return pxa_register_device(d, NULL, 0); + return mmp_register_device(d, NULL, 0); } static inline int pxa910_add_nand(struct pxa3xx_nand_platform_data *info) { - return pxa_register_device(&pxa910_device_nand, info, sizeof(*info)); + return mmp_register_device(&pxa910_device_nand, info, sizeof(*info)); } #endif /* __ASM_MACH_PXA910_H */ diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c deleted file mode 100644 index 3261d2322198..000000000000 --- a/arch/arm/mach-mmp/tavorevb.c +++ /dev/null @@ -1,113 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-mmp/tavorevb.c - * - * Support for the Marvell PXA910-based TavorEVB Development Platform. - */ -#include <linux/gpio.h> -#include <linux/gpio-pxa.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/smc91x.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include "addr-map.h" -#include "mfp-pxa910.h" -#include "pxa910.h" -#include "irqs.h" - -#include "common.h" - -static unsigned long tavorevb_pin_config[] __initdata = { - /* UART2 */ - GPIO47_UART2_RXD, - GPIO48_UART2_TXD, - - /* SMC */ - SM_nCS0_nCS0, - SM_ADV_SM_ADV, - SM_SCLK_SM_SCLK, - SM_SCLK_SM_SCLK, - SM_BE0_SM_BE0, - SM_BE1_SM_BE1, - - /* DFI */ - DF_IO0_ND_IO0, - DF_IO1_ND_IO1, - DF_IO2_ND_IO2, - DF_IO3_ND_IO3, - DF_IO4_ND_IO4, - DF_IO5_ND_IO5, - DF_IO6_ND_IO6, - DF_IO7_ND_IO7, - DF_IO8_ND_IO8, - DF_IO9_ND_IO9, - DF_IO10_ND_IO10, - DF_IO11_ND_IO11, - DF_IO12_ND_IO12, - DF_IO13_ND_IO13, - DF_IO14_ND_IO14, - DF_IO15_ND_IO15, - DF_nCS0_SM_nCS2_nCS0, - DF_ALE_SM_WEn_ND_ALE, - DF_CLE_SM_OEn_ND_CLE, - DF_WEn_DF_WEn, - DF_REn_DF_REn, - DF_RDY0_DF_RDY0, -}; - -static struct pxa_gpio_platform_data pxa910_gpio_pdata = { - .irq_base = MMP_GPIO_TO_IRQ(0), -}; - -static struct smc91x_platdata tavorevb_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, -}; - -static struct resource smc91x_resources[] = { - [0] = { - .start = SMC_CS1_PHYS_BASE + 0x300, - .end = SMC_CS1_PHYS_BASE + 0xfffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MMP_GPIO_TO_IRQ(80), - .end = MMP_GPIO_TO_IRQ(80), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - } -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &tavorevb_smc91x_info, - }, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static void __init tavorevb_init(void) -{ - mfp_config(ARRAY_AND_SIZE(tavorevb_pin_config)); - - /* on-chip devices */ - pxa910_add_uart(1); - platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata, - sizeof(struct pxa_gpio_platform_data)); - platform_device_register(&pxa910_device_gpio); - - /* off-chip devices */ - platform_device_register(&smc91x_device); -} - -MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)") - .map_io = mmp_map_io, - .nr_irqs = MMP_NR_IRQS, - .init_irq = pxa910_init_irq, - .init_time = pxa910_timer_init, - .init_machine = tavorevb_init, - .restart = mmp_restart, -MACHINE_END diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index 4f240760d4aa..345b2e6d5c7e 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -253,12 +253,12 @@ static struct spi_board_info spi_board_info[] __initdata = { static void __init add_disp(void) { - pxa_register_device(&pxa910_device_disp, + mmp_register_device(&pxa910_device_disp, &dkb_disp_info, sizeof(dkb_disp_info)); spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); - pxa_register_device(&pxa910_device_fb, + mmp_register_device(&pxa910_device_fb, &dkb_fb_info, sizeof(dkb_fb_info)); - pxa_register_device(&pxa910_device_panel, + mmp_register_device(&pxa910_device_panel, &dkb_tpo_panel_info, sizeof(dkb_tpo_panel_info)); } #endif diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig index 31ada63ba51b..909c6573ba8b 100644 --- a/arch/arm/mach-moxart/Kconfig +++ b/arch/arm/mach-moxart/Kconfig @@ -2,6 +2,7 @@ menuconfig ARCH_MOXART bool "MOXA ART SoC" depends on ARCH_MULTI_V4 + depends on CPU_LITTLE_ENDIAN select CPU_FA526 select ARM_DMA_MEM_BUFFERABLE select FARADAY_FTINTC010 diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig index ea52c7fabb79..f0276f0d1102 100644 --- a/arch/arm/mach-mv78xx0/Kconfig +++ b/arch/arm/mach-mv78xx0/Kconfig @@ -2,6 +2,7 @@ menuconfig ARCH_MV78XX0 bool "Marvell MV78xx0" depends on ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN select CPU_FEROCEON select GPIOLIB select MVEBU_MBUS diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 34dbeaab94b0..9f60a6fe0eaf 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -1,8 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_MVEBU bool "Marvell Engineering Business Unit (MVEBU) SoCs" - depends on ARCH_MULTI_V7 || ARCH_MULTI_V5 - select ARCH_SUPPORTS_BIG_ENDIAN + depends on ARCH_MULTI_V7 || (ARCH_MULTI_V5 && CPU_LITTLE_ENDIAN) select CLKSRC_MMIO select PINCTRL select PLAT_ORION diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index be1c1388055a..26dd8b9b7321 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -16,6 +16,7 @@ config SOC_IMX28 config ARCH_MXS bool "Freescale MXS (i.MX23, i.MX28) support" depends on ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN select GPIOLIB select MXS_TIMER select PINCTRL diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index e98429be2b18..f5c4df6d2aad 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -2,10 +2,10 @@ menuconfig ARCH_NOMADIK bool "ST-Ericsson Nomadik" depends on ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN select ARM_AMBA select ARM_VIC select CLKSRC_NOMADIK_MTU - select CLKSRC_NOMADIK_MTU_SCHED_CLOCK select CPU_ARM926T select GPIOLIB select MFD_SYSCON diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig index a71cf1d189ae..63b42a19d1b8 100644 --- a/arch/arm/mach-npcm/Kconfig +++ b/arch/arm/mach-npcm/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_NPCM bool "Nuvoton NPCM Architecture" - depends on ARCH_MULTI_V5 || ARCH_MULTI_V7 + depends on (ARCH_MULTI_V5 && CPU_LITTLE_ENDIAN) || ARCH_MULTI_V7 select PINCTRL if ARCH_NPCM diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig index 6ef1b167619b..eb9916233dea 100644 --- a/arch/arm/mach-nspire/Kconfig +++ b/arch/arm/mach-nspire/Kconfig @@ -2,6 +2,7 @@ config ARCH_NSPIRE bool "TI-NSPIRE based" depends on ARCH_MULTI_V4_V5 + depends on CPU_LITTLE_ENDIAN select CPU_ARM926T select GENERIC_IRQ_CHIP select ARM_AMBA diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 208c700c2455..0ac0567f721d 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -1,4 +1,16 @@ # SPDX-License-Identifier: GPL-2.0-only +menuconfig ARCH_OMAP1 + bool "TI OMAP1" + depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN + select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_OMAP + select CLKSRC_MMIO + select FORCE_PCI if PCCARD + select GPIOLIB + help + Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx) + if ARCH_OMAP1 menu "TI OMAP1 specific features" @@ -6,28 +18,41 @@ menu "TI OMAP1 specific features" comment "OMAP Core Type" config ARCH_OMAP730 + depends on ARCH_MULTI_V5 bool "OMAP730 Based System" select ARCH_OMAP_OTG select CPU_ARM926T select OMAP_MPU_TIMER config ARCH_OMAP850 + depends on ARCH_MULTI_V5 bool "OMAP850 Based System" select ARCH_OMAP_OTG select CPU_ARM926T config ARCH_OMAP15XX + depends on ARCH_MULTI_V4T default y bool "OMAP15xx Based System" select CPU_ARM925T select OMAP_MPU_TIMER config ARCH_OMAP16XX + depends on ARCH_MULTI_V5 bool "OMAP16xx Based System" select ARCH_OMAP_OTG select CPU_ARM926T select OMAP_DM_TIMER +config ARCH_OMAP1_ANY + select ARCH_OMAP + def_bool ARCH_OMAP730 || ARCH_OMAP850 || ARCH_OMAP15XX || ARCH_OMAP16XX + +config ARCH_OMAP + bool + +comment "OMAP Feature Selections" + config OMAP_MUX bool "OMAP multiplexing support" default y @@ -53,6 +78,54 @@ config OMAP_MUX_WARNINGS to change the pin multiplexing setup. When there are no warnings printed, it's safe to deselect OMAP_MUX for your product. +config OMAP_32K_TIMER + bool "Use 32KHz timer" + depends on ARCH_OMAP16XX + default ARCH_OMAP16XX + help + Select this option if you want to enable the OMAP 32KHz timer. + This timer saves power compared to the OMAP_MPU_TIMER, and has + support for no tick during idle. The 32KHz timer provides less + intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is + currently only available for OMAP16XX, 24XX, 34XX, OMAP4/5 and DRA7XX. + + On OMAP2PLUS this value is only used for CONFIG_HZ and + CLOCK_TICK_RATE compile time calculation. + The actual timer selection is done in the board file + through the (DT_)MACHINE_START structure. + +config OMAP_MPU_TIMER + bool "Use mpu timer" + depends on ARCH_OMAP1 + help + Select this option if you want to use the OMAP mpu timer. This + timer provides more intra-tick resolution than the 32KHz timer, + but consumes more power. + +config OMAP_SERIAL_WAKE + bool "Enable wake-up events for serial ports" + depends on ARCH_OMAP1 && OMAP_MUX + default y + help + Select this option if you want to have your system wake up + to data on the serial RX line. This allows you to wake the + system from serial console. + +config OMAP_RESET_CLOCKS + bool "Reset unused clocks during boot" + depends on ARCH_OMAP + help + Say Y if you want to reset unused clocks during boot. + This option saves power, but assumes all drivers are + using the clock framework. Broken drivers that do not + yet use clock framework may not work with this option. + If you are booting from another operating system, you + probably do not want this option enabled until your + device drivers work properly. + +config ARCH_OMAP_OTG + bool + comment "OMAP Board Type" config MACH_OMAP_INNOVATOR diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index c757a52d0801..506074b86333 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,9 +3,11 @@ # Makefile for the linux kernel. # +ifdef CONFIG_ARCH_OMAP1_ANY + # Common support obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \ - serial.o devices.o dma.o fb.o + serial.o devices.o dma.o omap-dma.o fb.o obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o ifneq ($(CONFIG_SND_SOC_OMAP_MCBSP),) @@ -58,6 +60,4 @@ obj-$(CONFIG_ARCH_OMAP850) += gpio7xx.o obj-$(CONFIG_ARCH_OMAP15XX) += gpio15xx.o obj-$(CONFIG_ARCH_OMAP16XX) += gpio16xx.o -ifneq ($(CONFIG_FB_OMAP),) -obj-y += lcd_dma.o endif diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index f745a65d3bd7..35c2f9574dbd 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -13,14 +13,15 @@ #include <linux/linkage.h> #include <linux/platform_data/ams-delta-fiq.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/soc/ti/omap1-io.h> #include <asm/assembler.h> #include <asm/irq.h> +#include "hardware.h" #include "ams-delta-fiq.h" #include "board-ams-delta.h" #include "iomap.h" -#include "soc.h" /* * OMAP1510 GPIO related symbol copied from arch/arm/mach-omap1/gpio15xx.c. diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index 4eea3e39e633..1f5852be057e 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -21,7 +21,9 @@ #include <linux/platform_device.h> #include <asm/fiq.h> +#include <linux/soc/ti/omap1-io.h> +#include "hardware.h" #include "ams-delta-fiq.h" #include "board-ams-delta.h" diff --git a/arch/arm/mach-omap1/ams-delta-fiq.h b/arch/arm/mach-omap1/ams-delta-fiq.h index fd76df3cce37..7f843caedb7c 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.h +++ b/arch/arm/mach-omap1/ams-delta-fiq.h @@ -16,7 +16,7 @@ #ifndef __AMS_DELTA_FIQ_H #define __AMS_DELTA_FIQ_H -#include <mach/irqs.h> +#include "irqs.h" /* * Interrupt number used for passing control from FIQ to IRQ. diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 1026a816dcc0..651c28d81132 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -28,6 +28,7 @@ #include <linux/omapfb.h> #include <linux/io.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/soc/ti/omap1-mux.h> #include <asm/serial.h> #include <asm/mach-types.h> @@ -35,11 +36,9 @@ #include <asm/mach/map.h> #include <linux/platform_data/keypad-omap.h> -#include <mach/mux.h> - -#include <mach/hardware.h> -#include <mach/usb.h> +#include "hardware.h" +#include "usb.h" #include "ams-delta-fiq.h" #include "board-ams-delta.h" #include "iomap.h" @@ -407,9 +406,6 @@ static struct gpio_led gpio_leds[] __initdata = { [LATCH1_PIN_LED_CAMERA] = { .name = "camera", .default_state = LEDS_GPIO_DEFSTATE_OFF, -#ifdef CONFIG_LEDS_TRIGGERS - .default_trigger = "ams_delta_camera", -#endif }, [LATCH1_PIN_LED_ADVERT] = { .name = "advert", @@ -456,10 +452,6 @@ static struct gpiod_lookup_table leds_gpio_table = { }, }; -#ifdef CONFIG_LEDS_TRIGGERS -DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger); -#endif - static struct platform_device ams_delta_audio_device = { .name = "ams-delta-audio", .id = -1, @@ -672,7 +664,7 @@ static void __init ams_delta_latch2_init(void) { u16 latch2 = 1 << LATCH2_PIN_MODEM_NRESET | 1 << LATCH2_PIN_MODEM_CODEC; - __raw_writew(latch2, LATCH2_VIRT); + __raw_writew(latch2, IOMEM(LATCH2_VIRT)); } static void __init ams_delta_init(void) @@ -705,10 +697,6 @@ static void __init ams_delta_init(void) omap_register_i2c_bus(1, 100, NULL, 0); omap1_usb_init(&ams_delta_usb_config); -#ifdef CONFIG_LEDS_TRIGGERS - led_trigger_register_simple("ams_delta_camera", - &ams_delta_camera_led_trigger); -#endif platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); /* diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index c3aa6f2e5546..f21e15c7b973 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -23,13 +23,13 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/tc.h> -#include <mach/mux.h> -#include "flash.h" +#include <linux/soc/ti/omap1-io.h> #include <linux/platform_data/keypad-omap.h> +#include "tc.h" -#include <mach/hardware.h> - +#include "mux.h" +#include "flash.h" +#include "hardware.h" #include "iomap.h" #include "common.h" #include "fpga.h" diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index c62554990115..3b2bcaf4bb01 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -14,15 +14,13 @@ #include <linux/init.h> #include <linux/platform_device.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/mux.h> - -#include <mach/usb.h> - +#include "hardware.h" +#include "mux.h" +#include "usb.h" #include "common.h" /* assume no Mini-AB port */ diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 977b0b744c22..f28a4c3ea501 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -28,22 +28,20 @@ #include <linux/mfd/tps65010.h> #include <linux/smc91x.h> #include <linux/omapfb.h> +#include <linux/omap-dma.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/keypad-omap.h> #include <linux/leds.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/mux.h> -#include <linux/omap-dma.h> -#include <mach/tc.h> -#include <linux/platform_data/keypad-omap.h> +#include "tc.h" +#include "mux.h" #include "flash.h" - -#include <mach/hardware.h> -#include <mach/usb.h> - +#include "hardware.h" +#include "usb.h" #include "common.h" #include "board-h2.h" diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 4249984f9c30..1e4c57710fcc 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -29,6 +29,8 @@ #include <linux/smc91x.h> #include <linux/omapfb.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/keypad-omap.h> +#include <linux/omap-dma.h> #include <linux/leds.h> #include <asm/setup.h> @@ -37,16 +39,12 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/mux.h> -#include <mach/tc.h> -#include <linux/platform_data/keypad-omap.h> -#include <linux/omap-dma.h> +#include "tc.h" +#include "mux.h" #include "flash.h" - -#include <mach/hardware.h> -#include <mach/irqs.h> -#include <mach/usb.h> - +#include "hardware.h" +#include "irqs.h" +#include "usb.h" #include "common.h" #include "board-h3.h" diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 258304edf23e..ec049cee49c6 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -23,16 +23,16 @@ #include <linux/spi/ads7846.h> #include <linux/omapfb.h> #include <linux/platform_data/keypad-omap.h> +#include <linux/soc/ti/omap1-io.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/omap7xx.h> +#include "hardware.h" +#include "omap7xx.h" #include "mmc.h" - -#include <mach/irqs.h> -#include <mach/usb.h> - +#include "irqs.h" +#include "usb.h" #include "common.h" /* LCD register definition */ @@ -170,7 +170,7 @@ static const unsigned int htc_herald_keymap[] = { KEY(3, 0, KEY_VOLUMEUP), /* Volume up */ KEY(4, 0, KEY_F2), /* Right bar (landscape) */ KEY(5, 0, KEY_MAIL), /* Win key (portrait) */ - KEY(6, 0, KEY_DIRECTORY), /* Right bar (protrait) */ + KEY(6, 0, KEY_DIRECTORY), /* Right bar (portrait) */ KEY(0, 1, KEY_LEFTCTRL), /* Windows key */ KEY(1, 1, KEY_COMMA), KEY(2, 1, KEY_M), diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index cbe093f969d5..6deb4ca079e9 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -23,19 +23,17 @@ #include <linux/input.h> #include <linux/smc91x.h> #include <linux/omapfb.h> +#include <linux/platform_data/keypad-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/mux.h> +#include "tc.h" +#include "mux.h" #include "flash.h" -#include <mach/tc.h> -#include <linux/platform_data/keypad-omap.h> - -#include <mach/hardware.h> -#include <mach/usb.h> - +#include "hardware.h" +#include "usb.h" #include "iomap.h" #include "common.h" #include "mmc.h" @@ -194,6 +192,9 @@ static struct platform_device innovator1510_smc91x_device = { static struct platform_device innovator1510_lcd_device = { .name = "lcd_inn1510", .id = -1, + .dev = { + .platform_data = (void __force *)OMAP1510_FPGA_LCD_PANEL_CONTROL, + } }; static struct platform_device innovator1510_spi_device = { @@ -287,6 +288,23 @@ static void __init innovator_init_smc91x(void) } #ifdef CONFIG_ARCH_OMAP15XX +/* + * Board specific gang-switched transceiver power on/off. + */ +static int innovator_omap_ohci_transceiver_power(int on) +{ + if (on) + __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL) + | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), + INNOVATOR_FPGA_CAM_USB_CONTROL); + else + __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL) + & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), + INNOVATOR_FPGA_CAM_USB_CONTROL); + + return 0; +} + static struct omap_usb_config innovator1510_usb_config __initdata = { /* for bundled non-standard host and peripheral cables */ .hmc_mode = 4, @@ -297,6 +315,8 @@ static struct omap_usb_config innovator1510_usb_config __initdata = { .register_dev = 1, .pins[0] = 2, + + .transceiver_power = innovator_omap_ohci_transceiver_power, }; static const struct omap_lcd_config innovator1510_lcd_config __initconst = { diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 11511ae2e0a2..8e0e58495023 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -28,11 +28,9 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/mux.h> - -#include <mach/hardware.h> -#include <mach/usb.h> - +#include "mux.h" +#include "hardware.h" +#include "usb.h" #include "common.h" #include "clock.h" #include "mmc.h" diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index e18b6f13300e..76684b7a4e87 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -42,18 +42,17 @@ #include <linux/mfd/tps65010.h> #include <linux/platform_data/gpio-omap.h> #include <linux/platform_data/omap1_bl.h> +#include <linux/soc/ti/omap1-io.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include "tc.h" #include "flash.h" -#include <mach/mux.h> -#include <mach/tc.h> - -#include <mach/hardware.h> -#include <mach/usb.h> - +#include "mux.h" +#include "hardware.h" +#include "usb.h" #include "common.h" /* Name of the GPIO chip used by the OMAP for GPIOs 0..15 */ @@ -153,14 +152,14 @@ static struct resource osk5912_cf_resources[] = { [0] = { .flags = IORESOURCE_IRQ, }, + [1] = { + .flags = IORESOURCE_MEM, + }, }; static struct platform_device osk5912_cf_device = { .name = "omap_cf", .id = -1, - .dev = { - .platform_data = (void *) 2 /* CS2 */, - }, .num_resources = ARRAY_SIZE(osk5912_cf_resources), .resource = osk5912_cf_resources, }; @@ -275,13 +274,41 @@ static void __init osk_init_smc91x(void) omap_writel(l, EMIFS_CCS(1)); } -static void __init osk_init_cf(void) +static void __init osk_init_cf(int seg) { + struct resource *res = &osk5912_cf_resources[1]; + omap_cfg_reg(M7_1610_GPIO62); if ((gpio_request(62, "cf_irq")) < 0) { printk("Error requesting gpio 62 for CF irq\n"); return; } + + switch (seg) { + /* NOTE: CS0 could be configured too ... */ + case 1: + res->start = OMAP_CS1_PHYS; + break; + case 2: + res->start = OMAP_CS2_PHYS; + break; + case 3: + res->start = omap_cs3_phys(); + break; + } + + res->end = res->start + SZ_8K - 1; + osk5912_cf_device.dev.platform_data = (void *)(uintptr_t)seg; + + /* NOTE: better EMIFS setup might support more cards; but the + * TRM only shows how to affect regular flash signals, not their + * CF/PCMCIA variants... + */ + pr_debug("%s: cs%d, previous ccs %08x acs %08x\n", __func__, + seg, omap_readl(EMIFS_CCS(seg)), omap_readl(EMIFS_ACS(seg))); + omap_writel(0x0004a1b3, EMIFS_CCS(seg)); /* synch mode 4 etc */ + omap_writel(0x00000000, EMIFS_ACS(seg)); /* OE hold/setup */ + /* the CF I/O IRQ is really active-low */ irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING); } @@ -580,7 +607,7 @@ static void __init osk_init(void) u32 l; osk_init_smc91x(); - osk_init_cf(); + osk_init_cf(2); /* CS2 */ /* Workaround for wrong CS3 (NOR flash) timing * There are some U-Boot versions out there which configure diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index ce6f0fcd9d12..72e1979c7a8b 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -25,21 +25,19 @@ #include <linux/interrupt.h> #include <linux/apm-emulation.h> #include <linux/omapfb.h> +#include <linux/omap-dma.h> +#include <linux/platform_data/keypad-omap.h> #include <linux/platform_data/omap1_bl.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include "tc.h" #include "flash.h" -#include <mach/mux.h> -#include <mach/tc.h> -#include <linux/omap-dma.h> -#include <linux/platform_data/keypad-omap.h> - -#include <mach/hardware.h> -#include <mach/usb.h> - +#include "mux.h" +#include "hardware.h" +#include "usb.h" #include "mmc.h" #include "common.h" diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 8a08311c4e05..537f0e6a2ff7 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -24,22 +24,20 @@ #include <linux/omapfb.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/omap-dma.h> #include <linux/platform_data/omap1_bl.h> #include <linux/platform_data/leds-omap.h> +#include <linux/platform_data/keypad-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include "tc.h" #include "flash.h" -#include <mach/mux.h> -#include <linux/omap-dma.h> -#include <mach/tc.h> -#include <linux/platform_data/keypad-omap.h> - -#include <mach/hardware.h> -#include <mach/usb.h> - +#include "mux.h" +#include "hardware.h" +#include "usb.h" #include "common.h" #define PALMTT_USBDETECT_GPIO 0 diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 034e5bc6a029..47f08ae5a2f3 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -28,20 +28,18 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/platform_data/omap1_bl.h> +#include <linux/platform_data/keypad-omap.h> +#include <linux/omap-dma.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include "tc.h" #include "flash.h" -#include <mach/mux.h> -#include <linux/omap-dma.h> -#include <mach/tc.h> -#include <linux/platform_data/keypad-omap.h> - -#include <mach/hardware.h> -#include <mach/usb.h> - +#include "mux.h" +#include "hardware.h" +#include "usb.h" #include "common.h" #define PALMZ71_USBDETECT_GPIO 0 diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 1aeeb7337d29..b041e6f6e9cf 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -19,17 +19,16 @@ #include <linux/smc91x.h> #include <linux/omapfb.h> #include <linux/platform_data/keypad-omap.h> +#include <linux/soc/ti/omap1-io.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/tc.h> -#include <mach/mux.h> +#include "tc.h" +#include "mux.h" #include "flash.h" - -#include <mach/hardware.h> - +#include "hardware.h" #include "iomap.h" #include "common.h" #include "fpga.h" @@ -289,6 +288,12 @@ static void __init omap_perseus2_init(void) omap_cfg_reg(F4_7XX_KBC3); omap_cfg_reg(E3_7XX_KBC4); + if (IS_ENABLED(CONFIG_SPI_OMAP_UWIRE)) { + /* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */ + int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000; + omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9); + } + platform_add_devices(devices, ARRAY_SIZE(devices)); omap_serial_init(); diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index 6192b1da75cb..f1c160924dfe 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -12,9 +12,8 @@ #include <linux/gpio.h> #include <linux/platform_device.h> -#include <mach/hardware.h> +#include "hardware.h" #include "board-sx1.h" - #include "mmc.h" #if IS_ENABLED(CONFIG_MMC_OMAP) diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index bb9ec345e204..f0dbb0e8d8e7 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -26,20 +26,18 @@ #include <linux/export.h> #include <linux/omapfb.h> #include <linux/platform_data/keypad-omap.h> +#include <linux/omap-dma.h> +#include "tc.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "flash.h" -#include <mach/mux.h> -#include <linux/omap-dma.h> -#include <mach/tc.h> +#include "mux.h" #include "board-sx1.h" - -#include <mach/hardware.h> -#include <mach/usb.h> - +#include "hardware.h" +#include "usb.h" #include "common.h" /* Write to I2C device */ diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 9d4a0ab50a46..83381e23fab9 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -16,11 +16,13 @@ #include <linux/io.h> #include <linux/clk.h> #include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/soc/ti/omap1-io.h> +#include <linux/spinlock.h> #include <asm/mach-types.h> -#include <mach/hardware.h> - +#include "hardware.h" #include "soc.h" #include "iomap.h" #include "clock.h" @@ -28,33 +30,37 @@ #include "sram.h" __u32 arm_idlect1_mask; -struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; +/* provide direct internal access (not via clk API) to some clocks */ +struct omap1_clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); -static DEFINE_SPINLOCK(clockfw_lock); +/* protect registeres shared among clk_enable/disable() and clk_set_rate() operations */ +static DEFINE_SPINLOCK(arm_ckctl_lock); +static DEFINE_SPINLOCK(arm_idlect2_lock); +static DEFINE_SPINLOCK(mod_conf_ctrl_0_lock); +static DEFINE_SPINLOCK(mod_conf_ctrl_1_lock); +static DEFINE_SPINLOCK(swd_clk_div_ctrl_sel_lock); /* * Omap1 specific clock functions */ -unsigned long omap1_uart_recalc(struct clk *clk) +unsigned long omap1_uart_recalc(struct omap1_clk *clk, unsigned long p_rate) { unsigned int val = __raw_readl(clk->enable_reg); - return val & clk->enable_bit ? 48000000 : 12000000; + return val & 1 << clk->enable_bit ? 48000000 : 12000000; } -unsigned long omap1_sossi_recalc(struct clk *clk) +unsigned long omap1_sossi_recalc(struct omap1_clk *clk, unsigned long p_rate) { u32 div = omap_readl(MOD_CONF_CTRL_1); div = (div >> 17) & 0x7; div++; - return clk->parent->rate / div; + return p_rate / div; } -static void omap1_clk_allow_idle(struct clk *clk) +static void omap1_clk_allow_idle(struct omap1_clk *clk) { struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; @@ -65,7 +71,7 @@ static void omap1_clk_allow_idle(struct clk *clk) arm_idlect1_mask |= 1 << iclk->idlect_shift; } -static void omap1_clk_deny_idle(struct clk *clk) +static void omap1_clk_deny_idle(struct omap1_clk *clk) { struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; @@ -129,7 +135,7 @@ static __u16 verify_ckctl_value(__u16 newval) return newval; } -static int calc_dsor_exp(struct clk *clk, unsigned long rate) +static int calc_dsor_exp(unsigned long rate, unsigned long realrate) { /* Note: If target frequency is too low, this function will return 4, * which is invalid value. Caller must check for this value and act @@ -142,15 +148,11 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate) * DSP_CK >= TC_CK * DSPMMU_CK >= TC_CK */ - unsigned long realrate; - struct clk * parent; unsigned dsor_exp; - parent = clk->parent; - if (unlikely(parent == NULL)) + if (unlikely(realrate == 0)) return -EIO; - realrate = parent->rate; for (dsor_exp=0; dsor_exp<4; dsor_exp++) { if (realrate <= rate) break; @@ -161,16 +163,50 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate) return dsor_exp; } -unsigned long omap1_ckctl_recalc(struct clk *clk) +unsigned long omap1_ckctl_recalc(struct omap1_clk *clk, unsigned long p_rate) { /* Calculate divisor encoded as 2-bit exponent */ int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); - return clk->parent->rate / dsor; + /* update locally maintained rate, required by arm_ck for omap1_show_rates() */ + clk->rate = p_rate / dsor; + return clk->rate; +} + +static int omap1_clk_is_enabled(struct clk_hw *hw) +{ + struct omap1_clk *clk = to_omap1_clk(hw); + bool api_ck_was_enabled = true; + __u32 regval32; + int ret; + + if (!clk->ops) /* no gate -- always enabled */ + return 1; + + if (clk->ops == &clkops_dspck) { + api_ck_was_enabled = omap1_clk_is_enabled(&api_ck_p->hw); + if (!api_ck_was_enabled) + if (api_ck_p->ops->enable(api_ck_p) < 0) + return 0; + } + + if (clk->flags & ENABLE_REG_32BIT) + regval32 = __raw_readl(clk->enable_reg); + else + regval32 = __raw_readw(clk->enable_reg); + + ret = regval32 & (1 << clk->enable_bit); + + if (!api_ck_was_enabled) + api_ck_p->ops->disable(api_ck_p); + + return ret; } -unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) + +unsigned long omap1_ckctl_recalc_dsp_domain(struct omap1_clk *clk, unsigned long p_rate) { + bool api_ck_was_enabled; int dsor; /* Calculate divisor encoded as 2-bit exponent @@ -180,15 +216,18 @@ unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) * Note that DSP_CKCTL virt addr = phys addr, so * we must use __raw_readw() instead of omap_readw(). */ - omap1_clk_enable(api_ck_p); + api_ck_was_enabled = omap1_clk_is_enabled(&api_ck_p->hw); + if (!api_ck_was_enabled) + api_ck_p->ops->enable(api_ck_p); dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset)); - omap1_clk_disable(api_ck_p); + if (!api_ck_was_enabled) + api_ck_p->ops->disable(api_ck_p); - return clk->parent->rate / dsor; + return p_rate / dsor; } /* MPU virtual clock functions */ -int omap1_select_table_rate(struct clk *clk, unsigned long rate) +int omap1_select_table_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate) { /* Find the highest supported frequency <= rate and switch to it */ struct mpu_rate * ptr; @@ -223,12 +262,12 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate) return 0; } -int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) +int omap1_clk_set_rate_dsp_domain(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate) { int dsor_exp; u16 regval; - dsor_exp = calc_dsor_exp(clk, rate); + dsor_exp = calc_dsor_exp(rate, p_rate); if (dsor_exp > 3) dsor_exp = -EINVAL; if (dsor_exp < 0) @@ -238,42 +277,51 @@ int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) regval &= ~(3 << clk->rate_offset); regval |= dsor_exp << clk->rate_offset; __raw_writew(regval, DSP_CKCTL); - clk->rate = clk->parent->rate / (1 << dsor_exp); + clk->rate = p_rate / (1 << dsor_exp); return 0; } -long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate) +long omap1_clk_round_rate_ckctl_arm(struct omap1_clk *clk, unsigned long rate, + unsigned long *p_rate) { - int dsor_exp = calc_dsor_exp(clk, rate); + int dsor_exp = calc_dsor_exp(rate, *p_rate); + if (dsor_exp < 0) return dsor_exp; if (dsor_exp > 3) dsor_exp = 3; - return clk->parent->rate / (1 << dsor_exp); + return *p_rate / (1 << dsor_exp); } -int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate) +int omap1_clk_set_rate_ckctl_arm(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate) { + unsigned long flags; int dsor_exp; u16 regval; - dsor_exp = calc_dsor_exp(clk, rate); + dsor_exp = calc_dsor_exp(rate, p_rate); if (dsor_exp > 3) dsor_exp = -EINVAL; if (dsor_exp < 0) return dsor_exp; + /* protect ARM_CKCTL register from concurrent access via clk_enable/disable() */ + spin_lock_irqsave(&arm_ckctl_lock, flags); + regval = omap_readw(ARM_CKCTL); regval &= ~(3 << clk->rate_offset); regval |= dsor_exp << clk->rate_offset; regval = verify_ckctl_value(regval); omap_writew(regval, ARM_CKCTL); - clk->rate = clk->parent->rate / (1 << dsor_exp); + clk->rate = p_rate / (1 << dsor_exp); + + spin_unlock_irqrestore(&arm_ckctl_lock, flags); + return 0; } -long omap1_round_to_table_rate(struct clk *clk, unsigned long rate) +long omap1_round_to_table_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate) { /* Find the highest supported frequency <= rate */ struct mpu_rate * ptr; @@ -324,26 +372,40 @@ static unsigned calc_ext_dsor(unsigned long rate) } /* XXX Only needed on 1510 */ -int omap1_set_uart_rate(struct clk *clk, unsigned long rate) +long omap1_round_uart_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate) +{ + return rate > 24000000 ? 48000000 : 12000000; +} + +int omap1_set_uart_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate) { + unsigned long flags; unsigned int val; - val = __raw_readl(clk->enable_reg); if (rate == 12000000) - val &= ~(1 << clk->enable_bit); + val = 0; else if (rate == 48000000) - val |= (1 << clk->enable_bit); + val = 1 << clk->enable_bit; else return -EINVAL; + + /* protect MOD_CONF_CTRL_0 register from concurrent access via clk_enable/disable() */ + spin_lock_irqsave(&mod_conf_ctrl_0_lock, flags); + + val |= __raw_readl(clk->enable_reg) & ~(1 << clk->enable_bit); __raw_writel(val, clk->enable_reg); + + spin_unlock_irqrestore(&mod_conf_ctrl_0_lock, flags); + clk->rate = rate; return 0; } /* External clock (MCLK & BCLK) functions */ -int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate) +int omap1_set_ext_clk_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate) { + unsigned long flags; unsigned dsor; __u16 ratio_bits; @@ -354,25 +416,53 @@ int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate) else ratio_bits = (dsor - 2) << 2; + /* protect SWD_CLK_DIV_CTRL_SEL register from concurrent access via clk_enable/disable() */ + spin_lock_irqsave(&swd_clk_div_ctrl_sel_lock, flags); + ratio_bits |= __raw_readw(clk->enable_reg) & ~0xfd; __raw_writew(ratio_bits, clk->enable_reg); + spin_unlock_irqrestore(&swd_clk_div_ctrl_sel_lock, flags); + return 0; } -int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) +static int calc_div_sossi(unsigned long rate, unsigned long p_rate) { - u32 l; int div; - unsigned long p_rate; - p_rate = clk->parent->rate; /* Round towards slower frequency */ div = (p_rate + rate - 1) / rate; - div--; + + return --div; +} + +long omap1_round_sossi_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate) +{ + int div; + + div = calc_div_sossi(rate, *p_rate); + if (div < 0) + div = 0; + else if (div > 7) + div = 7; + + return *p_rate / (div + 1); +} + +int omap1_set_sossi_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate) +{ + unsigned long flags; + u32 l; + int div; + + div = calc_div_sossi(rate, p_rate); if (div < 0 || div > 7) return -EINVAL; + /* protect MOD_CONF_CTRL_1 register from concurrent access via clk_enable/disable() */ + spin_lock_irqsave(&mod_conf_ctrl_1_lock, flags); + l = omap_readl(MOD_CONF_CTRL_1); l &= ~(7 << 17); l |= div << 17; @@ -380,15 +470,17 @@ int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) clk->rate = p_rate / (div + 1); + spin_unlock_irqrestore(&mod_conf_ctrl_1_lock, flags); + return 0; } -long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate) +long omap1_round_ext_clk_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate) { return 96000000 / calc_ext_dsor(rate); } -void omap1_init_ext_clk(struct clk *clk) +int omap1_init_ext_clk(struct omap1_clk *clk) { unsigned dsor; __u16 ratio_bits; @@ -404,59 +496,59 @@ void omap1_init_ext_clk(struct clk *clk) dsor = ratio_bits + 2; clk-> rate = 96000000 / dsor; + + return 0; } -int omap1_clk_enable(struct clk *clk) +static int omap1_clk_enable(struct clk_hw *hw) { + struct omap1_clk *clk = to_omap1_clk(hw), *parent = to_omap1_clk(clk_hw_get_parent(hw)); int ret = 0; - if (clk->usecount++ == 0) { - if (clk->parent) { - ret = omap1_clk_enable(clk->parent); - if (ret) - goto err; - - if (clk->flags & CLOCK_NO_IDLE_PARENT) - omap1_clk_deny_idle(clk->parent); - } + if (parent && clk->flags & CLOCK_NO_IDLE_PARENT) + omap1_clk_deny_idle(parent); + if (clk->ops && !(WARN_ON(!clk->ops->enable))) ret = clk->ops->enable(clk); - if (ret) { - if (clk->parent) - omap1_clk_disable(clk->parent); - goto err; - } - } - return ret; -err: - clk->usecount--; return ret; } -void omap1_clk_disable(struct clk *clk) +static void omap1_clk_disable(struct clk_hw *hw) { - if (clk->usecount > 0 && !(--clk->usecount)) { + struct omap1_clk *clk = to_omap1_clk(hw), *parent = to_omap1_clk(clk_hw_get_parent(hw)); + + if (clk->ops && !(WARN_ON(!clk->ops->disable))) clk->ops->disable(clk); - if (likely(clk->parent)) { - omap1_clk_disable(clk->parent); - if (clk->flags & CLOCK_NO_IDLE_PARENT) - omap1_clk_allow_idle(clk->parent); - } - } + + if (likely(parent) && clk->flags & CLOCK_NO_IDLE_PARENT) + omap1_clk_allow_idle(parent); } -static int omap1_clk_enable_generic(struct clk *clk) +static int omap1_clk_enable_generic(struct omap1_clk *clk) { + unsigned long flags; __u16 regval16; __u32 regval32; if (unlikely(clk->enable_reg == NULL)) { printk(KERN_ERR "clock.c: Enable for %s without enable code\n", - clk->name); + clk_hw_get_name(&clk->hw)); return -EINVAL; } + /* protect clk->enable_reg from concurrent access via clk_set_rate() */ + if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_CKCTL)) + spin_lock_irqsave(&arm_ckctl_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_IDLECT2)) + spin_lock_irqsave(&arm_idlect2_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0)) + spin_lock_irqsave(&mod_conf_ctrl_0_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1)) + spin_lock_irqsave(&mod_conf_ctrl_1_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL)) + spin_lock_irqsave(&swd_clk_div_ctrl_sel_lock, flags); + if (clk->flags & ENABLE_REG_32BIT) { regval32 = __raw_readl(clk->enable_reg); regval32 |= (1 << clk->enable_bit); @@ -467,17 +559,41 @@ static int omap1_clk_enable_generic(struct clk *clk) __raw_writew(regval16, clk->enable_reg); } + if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_CKCTL)) + spin_unlock_irqrestore(&arm_ckctl_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_IDLECT2)) + spin_unlock_irqrestore(&arm_idlect2_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0)) + spin_unlock_irqrestore(&mod_conf_ctrl_0_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1)) + spin_unlock_irqrestore(&mod_conf_ctrl_1_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL)) + spin_unlock_irqrestore(&swd_clk_div_ctrl_sel_lock, flags); + return 0; } -static void omap1_clk_disable_generic(struct clk *clk) +static void omap1_clk_disable_generic(struct omap1_clk *clk) { + unsigned long flags; __u16 regval16; __u32 regval32; if (clk->enable_reg == NULL) return; + /* protect clk->enable_reg from concurrent access via clk_set_rate() */ + if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_CKCTL)) + spin_lock_irqsave(&arm_ckctl_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_IDLECT2)) + spin_lock_irqsave(&arm_idlect2_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0)) + spin_lock_irqsave(&mod_conf_ctrl_0_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1)) + spin_lock_irqsave(&mod_conf_ctrl_1_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL)) + spin_lock_irqsave(&swd_clk_div_ctrl_sel_lock, flags); + if (clk->flags & ENABLE_REG_32BIT) { regval32 = __raw_readl(clk->enable_reg); regval32 &= ~(1 << clk->enable_bit); @@ -487,6 +603,17 @@ static void omap1_clk_disable_generic(struct clk *clk) regval16 &= ~(1 << clk->enable_bit); __raw_writew(regval16, clk->enable_reg); } + + if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_CKCTL)) + spin_unlock_irqrestore(&arm_ckctl_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_IDLECT2)) + spin_unlock_irqrestore(&arm_idlect2_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0)) + spin_unlock_irqrestore(&mod_conf_ctrl_0_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1)) + spin_unlock_irqrestore(&mod_conf_ctrl_1_lock, flags); + else if (clk->enable_reg == OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL)) + spin_unlock_irqrestore(&swd_clk_div_ctrl_sel_lock, flags); } const struct clkops clkops_generic = { @@ -494,25 +621,38 @@ const struct clkops clkops_generic = { .disable = omap1_clk_disable_generic, }; -static int omap1_clk_enable_dsp_domain(struct clk *clk) +static int omap1_clk_enable_dsp_domain(struct omap1_clk *clk) { - int retval; + bool api_ck_was_enabled; + int retval = 0; + + api_ck_was_enabled = omap1_clk_is_enabled(&api_ck_p->hw); + if (!api_ck_was_enabled) + retval = api_ck_p->ops->enable(api_ck_p); - retval = omap1_clk_enable(api_ck_p); if (!retval) { retval = omap1_clk_enable_generic(clk); - omap1_clk_disable(api_ck_p); + + if (!api_ck_was_enabled) + api_ck_p->ops->disable(api_ck_p); } return retval; } -static void omap1_clk_disable_dsp_domain(struct clk *clk) +static void omap1_clk_disable_dsp_domain(struct omap1_clk *clk) { - if (omap1_clk_enable(api_ck_p) == 0) { - omap1_clk_disable_generic(clk); - omap1_clk_disable(api_ck_p); - } + bool api_ck_was_enabled; + + api_ck_was_enabled = omap1_clk_is_enabled(&api_ck_p->hw); + if (!api_ck_was_enabled) + if (api_ck_p->ops->enable(api_ck_p) < 0) + return; + + omap1_clk_disable_generic(clk); + + if (!api_ck_was_enabled) + api_ck_p->ops->disable(api_ck_p); } const struct clkops clkops_dspck = { @@ -521,7 +661,7 @@ const struct clkops clkops_dspck = { }; /* XXX SYSC register handling does not belong in the clock framework */ -static int omap1_clk_enable_uart_functional_16xx(struct clk *clk) +static int omap1_clk_enable_uart_functional_16xx(struct omap1_clk *clk) { int ret; struct uart_clk *uclk; @@ -538,7 +678,7 @@ static int omap1_clk_enable_uart_functional_16xx(struct clk *clk) } /* XXX SYSC register handling does not belong in the clock framework */ -static void omap1_clk_disable_uart_functional_16xx(struct clk *clk) +static void omap1_clk_disable_uart_functional_16xx(struct omap1_clk *clk) { struct uart_clk *uclk; @@ -555,20 +695,33 @@ const struct clkops clkops_uart_16xx = { .disable = omap1_clk_disable_uart_functional_16xx, }; -long omap1_clk_round_rate(struct clk *clk, unsigned long rate) +static unsigned long omap1_clk_recalc_rate(struct clk_hw *hw, unsigned long p_rate) { - if (clk->round_rate != NULL) - return clk->round_rate(clk, rate); + struct omap1_clk *clk = to_omap1_clk(hw); + + if (clk->recalc) + return clk->recalc(clk, p_rate); return clk->rate; } -int omap1_clk_set_rate(struct clk *clk, unsigned long rate) +static long omap1_clk_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *p_rate) +{ + struct omap1_clk *clk = to_omap1_clk(hw); + + if (clk->round_rate != NULL) + return clk->round_rate(clk, rate, p_rate); + + return omap1_clk_recalc_rate(hw, *p_rate); +} + +static int omap1_clk_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long p_rate) { + struct omap1_clk *clk = to_omap1_clk(hw); int ret = -EINVAL; if (clk->set_rate) - ret = clk->set_rate(clk, rate); + ret = clk->set_rate(clk, rate, p_rate); return ret; } @@ -576,340 +729,105 @@ int omap1_clk_set_rate(struct clk *clk, unsigned long rate) * Omap1 clock reset and init functions */ +static int omap1_clk_init_op(struct clk_hw *hw) +{ + struct omap1_clk *clk = to_omap1_clk(hw); + + if (clk->init) + return clk->init(clk); + + return 0; +} + #ifdef CONFIG_OMAP_RESET_CLOCKS -void omap1_clk_disable_unused(struct clk *clk) +static void omap1_clk_disable_unused(struct clk_hw *hw) { - __u32 regval32; + struct omap1_clk *clk = to_omap1_clk(hw); + const char *name = clk_hw_get_name(hw); /* Clocks in the DSP domain need api_ck. Just assume bootloader * has not enabled any DSP clocks */ if (clk->enable_reg == DSP_IDLECT2) { - pr_info("Skipping reset check for DSP domain clock \"%s\"\n", - clk->name); + pr_info("Skipping reset check for DSP domain clock \"%s\"\n", name); return; } - /* Is the clock already disabled? */ - if (clk->flags & ENABLE_REG_32BIT) - regval32 = __raw_readl(clk->enable_reg); - else - regval32 = __raw_readw(clk->enable_reg); - - if ((regval32 & (1 << clk->enable_bit)) == 0) - return; - - printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name); - clk->ops->disable(clk); + pr_info("Disabling unused clock \"%s\"... ", name); + omap1_clk_disable(hw); printk(" done\n"); } #endif +const struct clk_ops omap1_clk_gate_ops = { + .enable = omap1_clk_enable, + .disable = omap1_clk_disable, + .is_enabled = omap1_clk_is_enabled, +#ifdef CONFIG_OMAP_RESET_CLOCKS + .disable_unused = omap1_clk_disable_unused, +#endif +}; -int clk_enable(struct clk *clk) -{ - unsigned long flags; - int ret; - - if (IS_ERR_OR_NULL(clk)) - return -EINVAL; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = omap1_clk_enable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - if (IS_ERR_OR_NULL(clk)) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - if (clk->usecount == 0) { - pr_err("Trying disable clock %s with 0 usecount\n", - clk->name); - WARN_ON(1); - goto out; - } - - omap1_clk_disable(clk); - -out: - spin_unlock_irqrestore(&clockfw_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long flags; - unsigned long ret; - - if (IS_ERR_OR_NULL(clk)) - return 0; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = clk->rate; - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_get_rate); - -/* - * Optional clock functions defined in include/linux/clk.h - */ - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - long ret; - - if (IS_ERR_OR_NULL(clk)) - return 0; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = omap1_clk_round_rate(clk, rate); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - int ret = -EINVAL; - - if (IS_ERR_OR_NULL(clk)) - return ret; - - spin_lock_irqsave(&clockfw_lock, flags); - ret = omap1_clk_set_rate(clk, rate); - if (ret == 0) - propagate_rate(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n"); - - return -EINVAL; -} -EXPORT_SYMBOL(clk_set_parent); +const struct clk_ops omap1_clk_rate_ops = { + .recalc_rate = omap1_clk_recalc_rate, + .round_rate = omap1_clk_round_rate, + .set_rate = omap1_clk_set_rate, + .init = omap1_clk_init_op, +}; -struct clk *clk_get_parent(struct clk *clk) -{ - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); +const struct clk_ops omap1_clk_full_ops = { + .enable = omap1_clk_enable, + .disable = omap1_clk_disable, + .is_enabled = omap1_clk_is_enabled, +#ifdef CONFIG_OMAP_RESET_CLOCKS + .disable_unused = omap1_clk_disable_unused, +#endif + .recalc_rate = omap1_clk_recalc_rate, + .round_rate = omap1_clk_round_rate, + .set_rate = omap1_clk_set_rate, + .init = omap1_clk_init_op, +}; /* * OMAP specific clock functions shared between omap1 and omap2 */ /* Used for clocks that always have same value as the parent clock */ -unsigned long followparent_recalc(struct clk *clk) +unsigned long followparent_recalc(struct omap1_clk *clk, unsigned long p_rate) { - return clk->parent->rate; + return p_rate; } /* * Used for clocks that have the same value as the parent clock, * divided by some factor */ -unsigned long omap_fixed_divisor_recalc(struct clk *clk) +unsigned long omap_fixed_divisor_recalc(struct omap1_clk *clk, unsigned long p_rate) { WARN_ON(!clk->fixed_div); - return clk->parent->rate / clk->fixed_div; -} - -void clk_reparent(struct clk *child, struct clk *parent) -{ - list_del_init(&child->sibling); - if (parent) - list_add(&child->sibling, &parent->children); - child->parent = parent; - - /* now do the debugfs renaming to reattach the child - to the proper parent */ + return p_rate / clk->fixed_div; } /* Propagate rate to children */ -void propagate_rate(struct clk *tclk) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &tclk->children, sibling) { - if (clkp->recalc) - clkp->rate = clkp->recalc(clkp); - propagate_rate(clkp); - } -} - -static LIST_HEAD(root_clks); - -/** - * recalculate_root_clocks - recalculate and propagate all root clocks - * - * Recalculates all root clocks (clocks with no parent), which if the - * clock's .recalc is set correctly, should also propagate their rates. - * Called at init. - */ -void recalculate_root_clocks(void) +void propagate_rate(struct omap1_clk *tclk) { struct clk *clkp; - list_for_each_entry(clkp, &root_clks, sibling) { - if (clkp->recalc) - clkp->rate = clkp->recalc(clkp); - propagate_rate(clkp); - } -} - -/** - * clk_preinit - initialize any fields in the struct clk before clk init - * @clk: struct clk * to initialize - * - * Initialize any struct clk fields needed before normal clk initialization - * can run. No return value. - */ -void clk_preinit(struct clk *clk) -{ - INIT_LIST_HEAD(&clk->children); -} - -int clk_register(struct clk *clk) -{ - if (IS_ERR_OR_NULL(clk)) - return -EINVAL; - - /* - * trap out already registered clocks - */ - if (clk->node.next || clk->node.prev) - return 0; - - mutex_lock(&clocks_mutex); - if (clk->parent) - list_add(&clk->sibling, &clk->parent->children); - else - list_add(&clk->sibling, &root_clks); - - list_add(&clk->node, &clocks); - if (clk->init) - clk->init(clk); - mutex_unlock(&clocks_mutex); - - return 0; -} -EXPORT_SYMBOL(clk_register); - -void clk_unregister(struct clk *clk) -{ - if (IS_ERR_OR_NULL(clk)) + /* depend on CCF ability to recalculate new rates across whole clock subtree */ + if (WARN_ON(!(clk_hw_get_flags(&tclk->hw) & CLK_GET_RATE_NOCACHE))) return; - mutex_lock(&clocks_mutex); - list_del(&clk->sibling); - list_del(&clk->node); - mutex_unlock(&clocks_mutex); -} -EXPORT_SYMBOL(clk_unregister); - -void clk_enable_init_clocks(void) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &clocks, node) - if (clkp->flags & ENABLE_ON_INIT) - clk_enable(clkp); -} - -/** - * omap_clk_get_by_name - locate OMAP struct clk by its name - * @name: name of the struct clk to locate - * - * Locate an OMAP struct clk by its name. Assumes that struct clk - * names are unique. Returns NULL if not found or a pointer to the - * struct clk if found. - */ -struct clk *omap_clk_get_by_name(const char *name) -{ - struct clk *c; - struct clk *ret = NULL; - - mutex_lock(&clocks_mutex); - - list_for_each_entry(c, &clocks, node) { - if (!strcmp(c->name, name)) { - ret = c; - break; - } - } - - mutex_unlock(&clocks_mutex); - - return ret; -} - -int omap_clk_enable_autoidle_all(void) -{ - struct clk *c; - unsigned long flags; - - spin_lock_irqsave(&clockfw_lock, flags); - - list_for_each_entry(c, &clocks, node) - if (c->ops->allow_idle) - c->ops->allow_idle(c); - - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} - -int omap_clk_disable_autoidle_all(void) -{ - struct clk *c; - unsigned long flags; - - spin_lock_irqsave(&clockfw_lock, flags); - - list_for_each_entry(c, &clocks, node) - if (c->ops->deny_idle) - c->ops->deny_idle(c); - - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} - -/* - * Low level helpers - */ -static int clkll_enable_null(struct clk *clk) -{ - return 0; -} + clkp = clk_get_sys(NULL, clk_hw_get_name(&tclk->hw)); + if (WARN_ON(!clkp)) + return; -static void clkll_disable_null(struct clk *clk) -{ + clk_get_rate(clkp); + clk_put(clkp); } -const struct clkops clkops_null = { - .enable = clkll_enable_null, - .disable = clkll_disable_null, +const struct clk_ops omap1_clk_null_ops = { }; /* @@ -917,115 +835,6 @@ const struct clkops clkops_null = { * * Used for clock aliases that are needed on some OMAPs, but not others */ -struct clk dummy_ck = { - .name = "dummy", - .ops = &clkops_null, +struct omap1_clk dummy_ck __refdata = { + .hw.init = CLK_HW_INIT_NO_PARENT("dummy", &omap1_clk_null_ops, 0), }; - -/* - * - */ - -#ifdef CONFIG_OMAP_RESET_CLOCKS -/* - * Disable any unused clocks left on by the bootloader - */ -static int __init clk_disable_unused(void) -{ - struct clk *ck; - unsigned long flags; - - pr_info("clock: disabling unused clocks to save power\n"); - - spin_lock_irqsave(&clockfw_lock, flags); - list_for_each_entry(ck, &clocks, node) { - if (ck->ops == &clkops_null) - continue; - - if (ck->usecount > 0 || !ck->enable_reg) - continue; - - omap1_clk_disable_unused(ck); - } - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} -late_initcall(clk_disable_unused); -late_initcall(omap_clk_enable_autoidle_all); -#endif - -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) -/* - * debugfs support to trace clock tree hierarchy and attributes - */ - -#include <linux/debugfs.h> -#include <linux/seq_file.h> - -static struct dentry *clk_debugfs_root; - -static int debug_clock_show(struct seq_file *s, void *unused) -{ - struct clk *c; - struct clk *pa; - - mutex_lock(&clocks_mutex); - seq_printf(s, "%-30s %-30s %-10s %s\n", - "clock-name", "parent-name", "rate", "use-count"); - - list_for_each_entry(c, &clocks, node) { - pa = c->parent; - seq_printf(s, "%-30s %-30s %-10lu %d\n", - c->name, pa ? pa->name : "none", c->rate, - c->usecount); - } - mutex_unlock(&clocks_mutex); - - return 0; -} - -DEFINE_SHOW_ATTRIBUTE(debug_clock); - -static void clk_debugfs_register_one(struct clk *c) -{ - struct dentry *d; - struct clk *pa = c->parent; - - d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root); - c->dent = d; - - debugfs_create_u8("usecount", S_IRUGO, c->dent, &c->usecount); - debugfs_create_ulong("rate", S_IRUGO, c->dent, &c->rate); - debugfs_create_x8("flags", S_IRUGO, c->dent, &c->flags); -} - -static void clk_debugfs_register(struct clk *c) -{ - struct clk *pa = c->parent; - - if (pa && !pa->dent) - clk_debugfs_register(pa); - - if (!c->dent) - clk_debugfs_register_one(c); -} - -static int __init clk_debugfs_init(void) -{ - struct clk *c; - struct dentry *d; - - d = debugfs_create_dir("clock", NULL); - clk_debugfs_root = d; - - list_for_each_entry(c, &clocks, node) - clk_debugfs_register(c); - - debugfs_create_file("summary", S_IRUGO, d, NULL, &debug_clock_fops); - - return 0; -} -late_initcall(clk_debugfs_init); - -#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index f3b8811f5ac0..16cfb2e86ee4 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -11,12 +11,11 @@ #define __ARCH_ARM_MACH_OMAP1_CLOCK_H #include <linux/clk.h> -#include <linux/list.h> - #include <linux/clkdev.h> +#include <linux/clk-provider.h> struct module; -struct clk; +struct omap1_clk; struct omap_clk { u16 cpu; @@ -29,7 +28,7 @@ struct omap_clk { .lk = { \ .dev_id = dev, \ .con_id = con, \ - .clk = ck, \ + .clk_hw = ck, \ }, \ } @@ -40,68 +39,30 @@ struct omap_clk { #define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */ #define CK_1710 (1 << 4) /* 1710 extra for rate selection */ - -/* Temporary, needed during the common clock framework conversion */ -#define __clk_get_name(clk) (clk->name) -#define __clk_get_parent(clk) (clk->parent) -#define __clk_get_rate(clk) (clk->rate) - /** * struct clkops - some clock function pointers * @enable: fn ptr that enables the current clock in hardware * @disable: fn ptr that enables the current clock in hardware - * @find_idlest: function returning the IDLEST register for the clock's IP blk - * @find_companion: function returning the "companion" clk reg for the clock * @allow_idle: fn ptr that enables autoidle for the current clock in hardware - * @deny_idle: fn ptr that disables autoidle for the current clock in hardware - * - * A "companion" clk is an accompanying clock to the one being queried - * that must be enabled for the IP module connected to the clock to - * become accessible by the hardware. Neither @find_idlest nor - * @find_companion should be needed; that information is IP - * block-specific; the hwmod code has been created to handle this, but - * until hwmod data is ready and drivers have been converted to use PM - * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and - * @find_companion must, unfortunately, remain. */ struct clkops { - int (*enable)(struct clk *); - void (*disable)(struct clk *); - void (*find_idlest)(struct clk *, void __iomem **, - u8 *, u8 *); - void (*find_companion)(struct clk *, void __iomem **, - u8 *); - void (*allow_idle)(struct clk *); - void (*deny_idle)(struct clk *); + int (*enable)(struct omap1_clk *clk); + void (*disable)(struct omap1_clk *clk); }; /* * struct clk.flags possibilities * * XXX document the rest of the clock flags here - * - * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL - * bits share the same register. This flag allows the - * omap4_dpllmx*() code to determine which GATE_CTRL bit field - * should be used. This is a temporary solution - a better approach - * would be to associate clock type-specific data with the clock, - * similar to the struct dpll_data approach. */ #define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ #define CLOCK_IDLE_CONTROL (1 << 1) #define CLOCK_NO_IDLE_PARENT (1 << 2) -#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ -#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ -#define CLOCK_CLKOUTX2 (1 << 5) /** - * struct clk - OMAP struct clk - * @node: list_head connecting this clock into the full clock list + * struct omap1_clk - OMAP1 struct clk + * @hw: struct clk_hw for common clock framework integration * @ops: struct clkops * for this clock - * @name: the name of the clock in the hardware (used in hwmod data and debug) - * @parent: pointer to this clock's parent struct clk - * @children: list_head connecting to the child clks' @sibling list_heads - * @sibling: list_head connecting this clk to its parent clk's @children * @rate: current clock rate * @enable_reg: register to write to enable the clock (see @enable_bit) * @recalc: fn ptr that returns the clock's current rate @@ -109,123 +70,65 @@ struct clkops { * @round_rate: fn ptr that can round the clock's current rate * @init: fn ptr to do clock-specific initialization * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) - * @usecount: number of users that have requested this clock to be enabled * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div * @flags: see "struct clk.flags possibilities" above * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) - * @src_offset: bitshift for source selection bitfield (OMAP1 only) - * - * XXX @rate_offset, @src_offset should probably be removed and OMAP1 - * clock code converted to use clksel. - * - * XXX @usecount is poorly named. It should be "enable_count" or - * something similar. "users" in the description refers to kernel - * code (core code or drivers) that have called clk_enable() and not - * yet called clk_disable(); the usecount of parent clocks is also - * incremented by the clock code when clk_enable() is called on child - * clocks and decremented by the clock code when clk_disable() is - * called on child clocks. - * - * XXX @clkdm, @usecount, @children, @sibling should be marked for - * internal use only. - * - * @children and @sibling are used to optimize parent-to-child clock - * tree traversals. (child-to-parent traversals use @parent.) - * - * XXX The notion of the clock's current rate probably needs to be - * separated from the clock's target rate. */ -struct clk { - struct list_head node; +struct omap1_clk { + struct clk_hw hw; const struct clkops *ops; - const char *name; - struct clk *parent; - struct list_head children; - struct list_head sibling; /* node for children */ unsigned long rate; void __iomem *enable_reg; - unsigned long (*recalc)(struct clk *); - int (*set_rate)(struct clk *, unsigned long); - long (*round_rate)(struct clk *, unsigned long); - void (*init)(struct clk *); + unsigned long (*recalc)(struct omap1_clk *clk, unsigned long rate); + int (*set_rate)(struct omap1_clk *clk, unsigned long rate, + unsigned long p_rate); + long (*round_rate)(struct omap1_clk *clk, unsigned long rate, + unsigned long *p_rate); + int (*init)(struct omap1_clk *clk); u8 enable_bit; - s8 usecount; u8 fixed_div; u8 flags; u8 rate_offset; - u8 src_offset; -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) - struct dentry *dent; /* For visible tree hierarchy */ -#endif -}; - -struct clk_functions { - int (*clk_enable)(struct clk *clk); - void (*clk_disable)(struct clk *clk); - long (*clk_round_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_parent)(struct clk *clk, struct clk *parent); - void (*clk_allow_idle)(struct clk *clk); - void (*clk_deny_idle)(struct clk *clk); - void (*clk_disable_unused)(struct clk *clk); }; +#define to_omap1_clk(_hw) container_of(_hw, struct omap1_clk, hw) -extern int clk_init(struct clk_functions *custom_clocks); -extern void clk_preinit(struct clk *clk); -extern int clk_register(struct clk *clk); -extern void clk_reparent(struct clk *child, struct clk *parent); -extern void clk_unregister(struct clk *clk); -extern void propagate_rate(struct clk *clk); -extern void recalculate_root_clocks(void); -extern unsigned long followparent_recalc(struct clk *clk); -extern void clk_enable_init_clocks(void); -unsigned long omap_fixed_divisor_recalc(struct clk *clk); -extern struct clk *omap_clk_get_by_name(const char *name); -extern int omap_clk_enable_autoidle_all(void); -extern int omap_clk_disable_autoidle_all(void); +void propagate_rate(struct omap1_clk *clk); +unsigned long followparent_recalc(struct omap1_clk *clk, unsigned long p_rate); +unsigned long omap_fixed_divisor_recalc(struct omap1_clk *clk, unsigned long p_rate); -extern const struct clkops clkops_null; - -extern struct clk dummy_ck; +extern struct omap1_clk dummy_ck; int omap1_clk_init(void); void omap1_clk_late_init(void); -extern int omap1_clk_enable(struct clk *clk); -extern void omap1_clk_disable(struct clk *clk); -extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate); -extern int omap1_clk_set_rate(struct clk *clk, unsigned long rate); -extern unsigned long omap1_ckctl_recalc(struct clk *clk); -extern int omap1_set_sossi_rate(struct clk *clk, unsigned long rate); -extern unsigned long omap1_sossi_recalc(struct clk *clk); -extern unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk); -extern int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate); -extern int omap1_set_uart_rate(struct clk *clk, unsigned long rate); -extern unsigned long omap1_uart_recalc(struct clk *clk); -extern int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate); -extern long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate); -extern void omap1_init_ext_clk(struct clk *clk); -extern int omap1_select_table_rate(struct clk *clk, unsigned long rate); -extern long omap1_round_to_table_rate(struct clk *clk, unsigned long rate); -extern int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate); -extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate); -extern unsigned long omap1_watchdog_recalc(struct clk *clk); - -#ifdef CONFIG_OMAP_RESET_CLOCKS -extern void omap1_clk_disable_unused(struct clk *clk); -#else -#define omap1_clk_disable_unused NULL -#endif +unsigned long omap1_ckctl_recalc(struct omap1_clk *clk, unsigned long p_rate); +long omap1_round_sossi_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate); +int omap1_set_sossi_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate); +unsigned long omap1_sossi_recalc(struct omap1_clk *clk, unsigned long p_rate); +unsigned long omap1_ckctl_recalc_dsp_domain(struct omap1_clk *clk, unsigned long p_rate); +int omap1_clk_set_rate_dsp_domain(struct omap1_clk *clk, unsigned long rate, + unsigned long p_rate); +long omap1_round_uart_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate); +int omap1_set_uart_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate); +unsigned long omap1_uart_recalc(struct omap1_clk *clk, unsigned long p_rate); +int omap1_set_ext_clk_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate); +long omap1_round_ext_clk_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate); +int omap1_init_ext_clk(struct omap1_clk *clk); +int omap1_select_table_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate); +long omap1_round_to_table_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate); +int omap1_clk_set_rate_ckctl_arm(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate); +long omap1_clk_round_rate_ckctl_arm(struct omap1_clk *clk, unsigned long rate, + unsigned long *p_rate); struct uart_clk { - struct clk clk; - unsigned long sysc_addr; + struct omap1_clk clk; + unsigned long sysc_addr; }; /* Provide a method for preventing idling some ARM IDLECT clocks */ struct arm_idlect1_clk { - struct clk clk; - unsigned long no_idle_count; - __u8 idlect_shift; + struct omap1_clk clk; + unsigned long no_idle_count; + __u8 idlect_shift; }; /* ARM_CKCTL bit shifts */ @@ -275,14 +178,18 @@ struct arm_idlect1_clk { #define SOFT_REQ_REG2 0xfffe0880 extern __u32 arm_idlect1_mask; -extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; +extern struct omap1_clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; extern const struct clkops clkops_dspck; -extern const struct clkops clkops_dummy; extern const struct clkops clkops_uart_16xx; extern const struct clkops clkops_generic; /* used for passing SoC type to omap1_{select,round_to}_table_rate() */ extern u32 cpu_mask; +extern const struct clk_ops omap1_clk_null_ops; +extern const struct clk_ops omap1_clk_gate_ops; +extern const struct clk_ops omap1_clk_rate_ops; +extern const struct clk_ops omap1_clk_full_ops; + #endif diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 3ebcd96efbff..96d846c37c43 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -14,16 +14,17 @@ #include <linux/kernel.h> #include <linux/io.h> #include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> #include <linux/cpufreq.h> #include <linux/delay.h> +#include <linux/soc/ti/omap1-io.h> #include <asm/mach-types.h> /* for machine_is_* */ #include "soc.h" - -#include <mach/hardware.h> -#include <mach/usb.h> /* for OTG_BASE */ - +#include "hardware.h" +#include "usb.h" /* for OTG_BASE */ #include "iomap.h" #include "clock.h" #include "sram.h" @@ -72,16 +73,18 @@ * Omap1 clocks */ -static struct clk ck_ref = { - .name = "ck_ref", - .ops = &clkops_null, +static struct omap1_clk ck_ref = { + .hw.init = CLK_HW_INIT_NO_PARENT("ck_ref", &omap1_clk_rate_ops, 0), .rate = 12000000, }; -static struct clk ck_dpll1 = { - .name = "ck_dpll1", - .ops = &clkops_null, - .parent = &ck_ref, +static struct omap1_clk ck_dpll1 = { + .hw.init = CLK_HW_INIT("ck_dpll1", "ck_ref", &omap1_clk_rate_ops, + /* + * force recursive refresh of rates of the clock + * and its children when clk_get_rate() is called + */ + CLK_GET_RATE_NOCACHE), }; /* @@ -90,33 +93,28 @@ static struct clk ck_dpll1 = { */ static struct arm_idlect1_clk ck_dpll1out = { .clk = { - .name = "ck_dpll1out", + .hw.init = CLK_HW_INIT("ck_dpll1out", "ck_dpll1", &omap1_clk_gate_ops, 0), .ops = &clkops_generic, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT | - ENABLE_ON_INIT, + .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_CKOUT_ARM, - .recalc = &followparent_recalc, }, .idlect_shift = IDL_CLKOUT_ARM_SHIFT, }; -static struct clk sossi_ck = { - .name = "ck_sossi", +static struct omap1_clk sossi_ck = { + .hw.init = CLK_HW_INIT("ck_sossi", "ck_dpll1out", &omap1_clk_full_ops, 0), .ops = &clkops_generic, - .parent = &ck_dpll1out.clk, .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1), .enable_bit = CONF_MOD_SOSSI_CLK_EN_R, .recalc = &omap1_sossi_recalc, + .round_rate = &omap1_round_sossi_rate, .set_rate = &omap1_set_sossi_rate, }; -static struct clk arm_ck = { - .name = "arm_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, +static struct omap1_clk arm_ck = { + .hw.init = CLK_HW_INIT("arm_ck", "ck_dpll1", &omap1_clk_rate_ops, 0), .rate_offset = CKCTL_ARMDIV_OFFSET, .recalc = &omap1_ckctl_recalc, .round_rate = omap1_clk_round_rate_ckctl_arm, @@ -125,9 +123,9 @@ static struct clk arm_ck = { static struct arm_idlect1_clk armper_ck = { .clk = { - .name = "armper_ck", + .hw.init = CLK_HW_INIT("armper_ck", "ck_dpll1", &omap1_clk_full_ops, + CLK_IS_CRITICAL), .ops = &clkops_generic, - .parent = &ck_dpll1, .flags = CLOCK_IDLE_CONTROL, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_PERCK, @@ -143,47 +141,41 @@ static struct arm_idlect1_clk armper_ck = { * FIXME: This clock seems to be necessary but no-one has asked for its * activation. [ GPIO code for 1510 ] */ -static struct clk arm_gpio_ck = { - .name = "ick", +static struct omap1_clk arm_gpio_ck = { + .hw.init = CLK_HW_INIT("ick", "ck_dpll1", &omap1_clk_gate_ops, CLK_IS_CRITICAL), .ops = &clkops_generic, - .parent = &ck_dpll1, - .flags = ENABLE_ON_INIT, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_GPIOCK, - .recalc = &followparent_recalc, }; static struct arm_idlect1_clk armxor_ck = { .clk = { - .name = "armxor_ck", + .hw.init = CLK_HW_INIT("armxor_ck", "ck_ref", &omap1_clk_gate_ops, + CLK_IS_CRITICAL), .ops = &clkops_generic, - .parent = &ck_ref, .flags = CLOCK_IDLE_CONTROL, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_XORPCK, - .recalc = &followparent_recalc, }, .idlect_shift = IDLXORP_ARM_SHIFT, }; static struct arm_idlect1_clk armtim_ck = { .clk = { - .name = "armtim_ck", + .hw.init = CLK_HW_INIT("armtim_ck", "ck_ref", &omap1_clk_gate_ops, + CLK_IS_CRITICAL), .ops = &clkops_generic, - .parent = &ck_ref, .flags = CLOCK_IDLE_CONTROL, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_TIMCK, - .recalc = &followparent_recalc, }, .idlect_shift = IDLTIM_ARM_SHIFT, }; static struct arm_idlect1_clk armwdt_ck = { .clk = { - .name = "armwdt_ck", + .hw.init = CLK_HW_INIT("armwdt_ck", "ck_ref", &omap1_clk_full_ops, 0), .ops = &clkops_generic, - .parent = &ck_ref, .flags = CLOCK_IDLE_CONTROL, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_WDTCK, @@ -193,11 +185,8 @@ static struct arm_idlect1_clk armwdt_ck = { .idlect_shift = IDLWDT_ARM_SHIFT, }; -static struct clk arminth_ck16xx = { - .name = "arminth_ck", - .ops = &clkops_null, - .parent = &arm_ck, - .recalc = &followparent_recalc, +static struct omap1_clk arminth_ck16xx = { + .hw.init = CLK_HW_INIT("arminth_ck", "arm_ck", &omap1_clk_null_ops, 0), /* Note: On 16xx the frequency can be divided by 2 by programming * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 * @@ -205,10 +194,9 @@ static struct clk arminth_ck16xx = { */ }; -static struct clk dsp_ck = { - .name = "dsp_ck", +static struct omap1_clk dsp_ck = { + .hw.init = CLK_HW_INIT("dsp_ck", "ck_dpll1", &omap1_clk_full_ops, 0), .ops = &clkops_generic, - .parent = &ck_dpll1, .enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL), .enable_bit = EN_DSPCK, .rate_offset = CKCTL_DSPDIV_OFFSET, @@ -217,20 +205,17 @@ static struct clk dsp_ck = { .set_rate = omap1_clk_set_rate_ckctl_arm, }; -static struct clk dspmmu_ck = { - .name = "dspmmu_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, +static struct omap1_clk dspmmu_ck = { + .hw.init = CLK_HW_INIT("dspmmu_ck", "ck_dpll1", &omap1_clk_rate_ops, 0), .rate_offset = CKCTL_DSPMMUDIV_OFFSET, .recalc = &omap1_ckctl_recalc, .round_rate = omap1_clk_round_rate_ckctl_arm, .set_rate = omap1_clk_set_rate_ckctl_arm, }; -static struct clk dspper_ck = { - .name = "dspper_ck", +static struct omap1_clk dspper_ck = { + .hw.init = CLK_HW_INIT("dspper_ck", "ck_dpll1", &omap1_clk_full_ops, 0), .ops = &clkops_dspck, - .parent = &ck_dpll1, .enable_reg = DSP_IDLECT2, .enable_bit = EN_PERCK, .rate_offset = CKCTL_PERDIV_OFFSET, @@ -239,29 +224,23 @@ static struct clk dspper_ck = { .set_rate = &omap1_clk_set_rate_dsp_domain, }; -static struct clk dspxor_ck = { - .name = "dspxor_ck", +static struct omap1_clk dspxor_ck = { + .hw.init = CLK_HW_INIT("dspxor_ck", "ck_ref", &omap1_clk_gate_ops, 0), .ops = &clkops_dspck, - .parent = &ck_ref, .enable_reg = DSP_IDLECT2, .enable_bit = EN_XORPCK, - .recalc = &followparent_recalc, }; -static struct clk dsptim_ck = { - .name = "dsptim_ck", +static struct omap1_clk dsptim_ck = { + .hw.init = CLK_HW_INIT("dsptim_ck", "ck_ref", &omap1_clk_gate_ops, 0), .ops = &clkops_dspck, - .parent = &ck_ref, .enable_reg = DSP_IDLECT2, .enable_bit = EN_DSPTIMCK, - .recalc = &followparent_recalc, }; static struct arm_idlect1_clk tc_ck = { .clk = { - .name = "tc_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, + .hw.init = CLK_HW_INIT("tc_ck", "ck_dpll1", &omap1_clk_rate_ops, 0), .flags = CLOCK_IDLE_CONTROL, .rate_offset = CKCTL_TCDIV_OFFSET, .recalc = &omap1_ckctl_recalc, @@ -271,117 +250,88 @@ static struct arm_idlect1_clk tc_ck = { .idlect_shift = IDLIF_ARM_SHIFT, }; -static struct clk arminth_ck1510 = { - .name = "arminth_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, +static struct omap1_clk arminth_ck1510 = { + .hw.init = CLK_HW_INIT("arminth_ck", "tc_ck", &omap1_clk_null_ops, 0), /* Note: On 1510 the frequency follows TC_CK * * 16xx version is in MPU clocks. */ }; -static struct clk tipb_ck = { +static struct omap1_clk tipb_ck = { /* No-idle controlled by "tc_ck" */ - .name = "tipb_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, + .hw.init = CLK_HW_INIT("tipb_ck", "tc_ck", &omap1_clk_null_ops, 0), }; -static struct clk l3_ocpi_ck = { +static struct omap1_clk l3_ocpi_ck = { /* No-idle controlled by "tc_ck" */ - .name = "l3_ocpi_ck", + .hw.init = CLK_HW_INIT("l3_ocpi_ck", "tc_ck", &omap1_clk_gate_ops, 0), .ops = &clkops_generic, - .parent = &tc_ck.clk, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), .enable_bit = EN_OCPI_CK, - .recalc = &followparent_recalc, }; -static struct clk tc1_ck = { - .name = "tc1_ck", +static struct omap1_clk tc1_ck = { + .hw.init = CLK_HW_INIT("tc1_ck", "tc_ck", &omap1_clk_gate_ops, 0), .ops = &clkops_generic, - .parent = &tc_ck.clk, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), .enable_bit = EN_TC1_CK, - .recalc = &followparent_recalc, }; /* * FIXME: This clock seems to be necessary but no-one has asked for its * activation. [ pm.c (SRAM), CCP, Camera ] */ -static struct clk tc2_ck = { - .name = "tc2_ck", + +static struct omap1_clk tc2_ck = { + .hw.init = CLK_HW_INIT("tc2_ck", "tc_ck", &omap1_clk_gate_ops, CLK_IS_CRITICAL), .ops = &clkops_generic, - .parent = &tc_ck.clk, - .flags = ENABLE_ON_INIT, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), .enable_bit = EN_TC2_CK, - .recalc = &followparent_recalc, }; -static struct clk dma_ck = { +static struct omap1_clk dma_ck = { /* No-idle controlled by "tc_ck" */ - .name = "dma_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, + .hw.init = CLK_HW_INIT("dma_ck", "tc_ck", &omap1_clk_null_ops, 0), }; -static struct clk dma_lcdfree_ck = { - .name = "dma_lcdfree_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, +static struct omap1_clk dma_lcdfree_ck = { + .hw.init = CLK_HW_INIT("dma_lcdfree_ck", "tc_ck", &omap1_clk_null_ops, 0), }; static struct arm_idlect1_clk api_ck = { .clk = { - .name = "api_ck", + .hw.init = CLK_HW_INIT("api_ck", "tc_ck", &omap1_clk_gate_ops, 0), .ops = &clkops_generic, - .parent = &tc_ck.clk, .flags = CLOCK_IDLE_CONTROL, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_APICK, - .recalc = &followparent_recalc, }, .idlect_shift = IDLAPI_ARM_SHIFT, }; static struct arm_idlect1_clk lb_ck = { .clk = { - .name = "lb_ck", + .hw.init = CLK_HW_INIT("lb_ck", "tc_ck", &omap1_clk_gate_ops, 0), .ops = &clkops_generic, - .parent = &tc_ck.clk, .flags = CLOCK_IDLE_CONTROL, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_LBCK, - .recalc = &followparent_recalc, }, .idlect_shift = IDLLB_ARM_SHIFT, }; -static struct clk rhea1_ck = { - .name = "rhea1_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, +static struct omap1_clk rhea1_ck = { + .hw.init = CLK_HW_INIT("rhea1_ck", "tc_ck", &omap1_clk_null_ops, 0), }; -static struct clk rhea2_ck = { - .name = "rhea2_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, +static struct omap1_clk rhea2_ck = { + .hw.init = CLK_HW_INIT("rhea2_ck", "tc_ck", &omap1_clk_null_ops, 0), }; -static struct clk lcd_ck_16xx = { - .name = "lcd_ck", +static struct omap1_clk lcd_ck_16xx = { + .hw.init = CLK_HW_INIT("lcd_ck", "ck_dpll1", &omap1_clk_full_ops, 0), .ops = &clkops_generic, - .parent = &ck_dpll1, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_LCDCK, .rate_offset = CKCTL_LCDDIV_OFFSET, @@ -392,9 +342,8 @@ static struct clk lcd_ck_16xx = { static struct arm_idlect1_clk lcd_ck_1510 = { .clk = { - .name = "lcd_ck", + .hw.init = CLK_HW_INIT("lcd_ck", "ck_dpll1", &omap1_clk_full_ops, 0), .ops = &clkops_generic, - .parent = &ck_dpll1, .flags = CLOCK_IDLE_CONTROL, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_LCDCK, @@ -406,37 +355,35 @@ static struct arm_idlect1_clk lcd_ck_1510 = { .idlect_shift = OMAP1510_IDLLCD_ARM_SHIFT, }; + /* * XXX The enable_bit here is misused - it simply switches between 12MHz - * and 48MHz. Reimplement with clksel. + * and 48MHz. Reimplement with clk_mux. * * XXX does this need SYSC register handling? */ -static struct clk uart1_1510 = { - .name = "uart1_ck", - .ops = &clkops_null, +static struct omap1_clk uart1_1510 = { /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, + .hw.init = CLK_HW_INIT("uart1_ck", "armper_ck", &omap1_clk_full_ops, 0), .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = CONF_MOD_UART1_CLK_MODE_R, + .round_rate = &omap1_round_uart_rate, .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, }; /* * XXX The enable_bit here is misused - it simply switches between 12MHz - * and 48MHz. Reimplement with clksel. + * and 48MHz. Reimplement with clk_mux. * * XXX SYSC register handling does not belong in the clock framework */ static struct uart_clk uart1_16xx = { .clk = { - .name = "uart1_ck", .ops = &clkops_uart_16xx, /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, + .hw.init = CLK_HW_INIT("uart1_ck", "armper_ck", &omap1_clk_full_ops, 0), .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), @@ -447,54 +394,49 @@ static struct uart_clk uart1_16xx = { /* * XXX The enable_bit here is misused - it simply switches between 12MHz - * and 48MHz. Reimplement with clksel. + * and 48MHz. Reimplement with clk_mux. * * XXX does this need SYSC register handling? */ -static struct clk uart2_ck = { - .name = "uart2_ck", - .ops = &clkops_null, +static struct omap1_clk uart2_ck = { /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, + .hw.init = CLK_HW_INIT("uart2_ck", "armper_ck", &omap1_clk_full_ops, 0), .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = CONF_MOD_UART2_CLK_MODE_R, + .round_rate = &omap1_round_uart_rate, .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, }; /* * XXX The enable_bit here is misused - it simply switches between 12MHz - * and 48MHz. Reimplement with clksel. + * and 48MHz. Reimplement with clk_mux. * * XXX does this need SYSC register handling? */ -static struct clk uart3_1510 = { - .name = "uart3_ck", - .ops = &clkops_null, +static struct omap1_clk uart3_1510 = { /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, + .hw.init = CLK_HW_INIT("uart3_ck", "armper_ck", &omap1_clk_full_ops, 0), .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = CONF_MOD_UART3_CLK_MODE_R, + .round_rate = &omap1_round_uart_rate, .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, }; /* * XXX The enable_bit here is misused - it simply switches between 12MHz - * and 48MHz. Reimplement with clksel. + * and 48MHz. Reimplement with clk_mux. * * XXX SYSC register handling does not belong in the clock framework */ static struct uart_clk uart3_16xx = { .clk = { - .name = "uart3_ck", .ops = &clkops_uart_16xx, /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, + .hw.init = CLK_HW_INIT("uart3_ck", "armper_ck", &omap1_clk_full_ops, 0), .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), @@ -503,30 +445,30 @@ static struct uart_clk uart3_16xx = { .sysc_addr = 0xfffb9854, }; -static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ - .name = "usb_clko", +static struct omap1_clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ .ops = &clkops_generic, /* Direct from ULPD, no parent */ + .hw.init = CLK_HW_INIT_NO_PARENT("usb_clko", &omap1_clk_full_ops, 0), .rate = 6000000, .flags = ENABLE_REG_32BIT, .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL), .enable_bit = USB_MCLK_EN_BIT, }; -static struct clk usb_hhc_ck1510 = { - .name = "usb_hhc_ck", +static struct omap1_clk usb_hhc_ck1510 = { .ops = &clkops_generic, /* Direct from ULPD, no parent */ + .hw.init = CLK_HW_INIT_NO_PARENT("usb_hhc_ck", &omap1_clk_full_ops, 0), .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ .flags = ENABLE_REG_32BIT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = USB_HOST_HHC_UHOST_EN, }; -static struct clk usb_hhc_ck16xx = { - .name = "usb_hhc_ck", +static struct omap1_clk usb_hhc_ck16xx = { .ops = &clkops_generic, /* Direct from ULPD, no parent */ + .hw.init = CLK_HW_INIT_NO_PARENT("usb_hhc_ck", &omap1_clk_full_ops, 0), .rate = 48000000, /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ .flags = ENABLE_REG_32BIT, @@ -534,46 +476,46 @@ static struct clk usb_hhc_ck16xx = { .enable_bit = OTG_SYSCON_2_UHOST_EN_SHIFT }; -static struct clk usb_dc_ck = { - .name = "usb_dc_ck", +static struct omap1_clk usb_dc_ck = { .ops = &clkops_generic, /* Direct from ULPD, no parent */ + .hw.init = CLK_HW_INIT_NO_PARENT("usb_dc_ck", &omap1_clk_full_ops, 0), .rate = 48000000, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), .enable_bit = SOFT_USB_OTG_DPLL_REQ_SHIFT, }; -static struct clk uart1_7xx = { - .name = "uart1_ck", +static struct omap1_clk uart1_7xx = { .ops = &clkops_generic, /* Direct from ULPD, no parent */ + .hw.init = CLK_HW_INIT_NO_PARENT("uart1_ck", &omap1_clk_full_ops, 0), .rate = 12000000, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), .enable_bit = 9, }; -static struct clk uart2_7xx = { - .name = "uart2_ck", +static struct omap1_clk uart2_7xx = { .ops = &clkops_generic, /* Direct from ULPD, no parent */ + .hw.init = CLK_HW_INIT_NO_PARENT("uart2_ck", &omap1_clk_full_ops, 0), .rate = 12000000, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), .enable_bit = 11, }; -static struct clk mclk_1510 = { - .name = "mclk", +static struct omap1_clk mclk_1510 = { .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .hw.init = CLK_HW_INIT_NO_PARENT("mclk", &omap1_clk_full_ops, 0), .rate = 12000000, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), .enable_bit = SOFT_COM_MCKO_REQ_SHIFT, }; -static struct clk mclk_16xx = { - .name = "mclk", +static struct omap1_clk mclk_16xx = { .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .hw.init = CLK_HW_INIT_NO_PARENT("mclk", &omap1_clk_full_ops, 0), .enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL), .enable_bit = COM_ULPD_PLL_CLK_REQ, .set_rate = &omap1_set_ext_clk_rate, @@ -581,17 +523,16 @@ static struct clk mclk_16xx = { .init = &omap1_init_ext_clk, }; -static struct clk bclk_1510 = { - .name = "bclk", - .ops = &clkops_generic, +static struct omap1_clk bclk_1510 = { /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .hw.init = CLK_HW_INIT_NO_PARENT("bclk", &omap1_clk_rate_ops, 0), .rate = 12000000, }; -static struct clk bclk_16xx = { - .name = "bclk", +static struct omap1_clk bclk_16xx = { .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .hw.init = CLK_HW_INIT_NO_PARENT("bclk", &omap1_clk_full_ops, 0), .enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL), .enable_bit = SWD_ULPD_PLL_CLK_REQ, .set_rate = &omap1_set_ext_clk_rate, @@ -599,11 +540,10 @@ static struct clk bclk_16xx = { .init = &omap1_init_ext_clk, }; -static struct clk mmc1_ck = { - .name = "mmc1_ck", +static struct omap1_clk mmc1_ck = { .ops = &clkops_generic, /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, + .hw.init = CLK_HW_INIT("mmc1_ck", "armper_ck", &omap1_clk_full_ops, 0), .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), @@ -614,32 +554,29 @@ static struct clk mmc1_ck = { * XXX MOD_CONF_CTRL_0 bit 20 is defined in the 1510 TRM as * CONF_MOD_MCBSP3_AUXON ?? */ -static struct clk mmc2_ck = { - .name = "mmc2_ck", +static struct omap1_clk mmc2_ck = { .ops = &clkops_generic, /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, + .hw.init = CLK_HW_INIT("mmc2_ck", "armper_ck", &omap1_clk_full_ops, 0), .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = 20, }; -static struct clk mmc3_ck = { - .name = "mmc3_ck", +static struct omap1_clk mmc3_ck = { .ops = &clkops_generic, /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, + .hw.init = CLK_HW_INIT("mmc3_ck", "armper_ck", &omap1_clk_full_ops, 0), .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), .enable_bit = SOFT_MMC_DPLL_REQ_SHIFT, }; -static struct clk virtual_ck_mpu = { - .name = "mpu", - .ops = &clkops_null, - .parent = &arm_ck, /* Is smarter alias for */ +static struct omap1_clk virtual_ck_mpu = { + /* Is smarter alias for arm_ck */ + .hw.init = CLK_HW_INIT("mpu", "arm_ck", &omap1_clk_rate_ops, 0), .recalc = &followparent_recalc, .set_rate = &omap1_select_table_rate, .round_rate = &omap1_round_to_table_rate, @@ -647,20 +584,14 @@ static struct clk virtual_ck_mpu = { /* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK remains active during MPU idle whenever this is enabled */ -static struct clk i2c_fck = { - .name = "i2c_fck", - .ops = &clkops_null, +static struct omap1_clk i2c_fck = { + .hw.init = CLK_HW_INIT("i2c_fck", "armxor_ck", &omap1_clk_gate_ops, 0), .flags = CLOCK_NO_IDLE_PARENT, - .parent = &armxor_ck.clk, - .recalc = &followparent_recalc, }; -static struct clk i2c_ick = { - .name = "i2c_ick", - .ops = &clkops_null, +static struct omap1_clk i2c_ick = { + .hw.init = CLK_HW_INIT("i2c_ick", "armper_ck", &omap1_clk_gate_ops, 0), .flags = CLOCK_NO_IDLE_PARENT, - .parent = &armper_ck.clk, - .recalc = &followparent_recalc, }; /* @@ -669,81 +600,81 @@ static struct clk i2c_ick = { static struct omap_clk omap_clks[] = { /* non-ULPD clocks */ - CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "ck_ref", &ck_ref.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "ck_dpll1", &ck_dpll1.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX), /* CK_GEN1 clocks */ - CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), - CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX), - CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap_gpio.0", "ick", &arm_gpio_ck, CK_1510 | CK_310), - CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX), - CLK("omap_wdt", "ick", &dummy_ck, CK_1510 | CK_310), - CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310), - CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX), + CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk.hw, CK_16XX), + CLK(NULL, "ck_sossi", &sossi_ck.hw, CK_16XX), + CLK(NULL, "arm_ck", &arm_ck.hw, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "armper_ck", &armper_ck.clk.hw, CK_16XX | CK_1510 | CK_310), + CLK("omap_gpio.0", "ick", &arm_gpio_ck.hw, CK_1510 | CK_310), + CLK(NULL, "armxor_ck", &armxor_ck.clk.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "armtim_ck", &armtim_ck.clk.hw, CK_16XX | CK_1510 | CK_310), + CLK("omap_wdt", "fck", &armwdt_ck.clk.hw, CK_16XX | CK_1510 | CK_310), + CLK("omap_wdt", "ick", &armper_ck.clk.hw, CK_16XX), + CLK("omap_wdt", "ick", &dummy_ck.hw, CK_1510 | CK_310), + CLK(NULL, "arminth_ck", &arminth_ck1510.hw, CK_1510 | CK_310), + CLK(NULL, "arminth_ck", &arminth_ck16xx.hw, CK_16XX), /* CK_GEN2 clocks */ - CLK(NULL, "dsp_ck", &dsp_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspmmu_ck", &dspmmu_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspper_ck", &dspper_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dsp_ck", &dsp_ck.hw, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspmmu_ck", &dspmmu_ck.hw, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspper_ck", &dspper_ck.hw, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspxor_ck", &dspxor_ck.hw, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dsptim_ck", &dsptim_ck.hw, CK_16XX | CK_1510 | CK_310), /* CK_GEN3 clocks */ - CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), - CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX | CK_7XX), - CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), - CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX), - CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX), - CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), - CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), - CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), - CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX), - CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310), + CLK(NULL, "tc_ck", &tc_ck.clk.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "tipb_ck", &tipb_ck.hw, CK_1510 | CK_310), + CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck.hw, CK_16XX | CK_7XX), + CLK(NULL, "tc1_ck", &tc1_ck.hw, CK_16XX), + CLK(NULL, "tc2_ck", &tc2_ck.hw, CK_16XX), + CLK(NULL, "dma_ck", &dma_ck.hw, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck.hw, CK_16XX), + CLK(NULL, "api_ck", &api_ck.clk.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "lb_ck", &lb_ck.clk.hw, CK_1510 | CK_310), + CLK(NULL, "rhea1_ck", &rhea1_ck.hw, CK_16XX), + CLK(NULL, "rhea2_ck", &rhea2_ck.hw, CK_16XX), + CLK(NULL, "lcd_ck", &lcd_ck_16xx.hw, CK_16XX | CK_7XX), + CLK(NULL, "lcd_ck", &lcd_ck_1510.clk.hw, CK_1510 | CK_310), /* ULPD clocks */ - CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), - CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX), - CLK(NULL, "uart1_ck", &uart1_7xx, CK_7XX), - CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "uart2_ck", &uart2_7xx, CK_7XX), - CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310), - CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX), - CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310), - CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX | CK_7XX), - CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310), - CLK(NULL, "mclk", &mclk_16xx, CK_16XX), - CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), - CLK(NULL, "bclk", &bclk_16xx, CK_16XX), - CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310), - CLK("mmci-omap.0", "fck", &mmc3_ck, CK_7XX), - CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX), - CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), + CLK(NULL, "uart1_ck", &uart1_1510.hw, CK_1510 | CK_310), + CLK(NULL, "uart1_ck", &uart1_16xx.clk.hw, CK_16XX), + CLK(NULL, "uart1_ck", &uart1_7xx.hw, CK_7XX), + CLK(NULL, "uart2_ck", &uart2_ck.hw, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "uart2_ck", &uart2_7xx.hw, CK_7XX), + CLK(NULL, "uart3_ck", &uart3_1510.hw, CK_1510 | CK_310), + CLK(NULL, "uart3_ck", &uart3_16xx.clk.hw, CK_16XX), + CLK(NULL, "usb_clko", &usb_clko.hw, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510.hw, CK_1510 | CK_310), + CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx.hw, CK_16XX), + CLK(NULL, "usb_dc_ck", &usb_dc_ck.hw, CK_16XX | CK_7XX), + CLK(NULL, "mclk", &mclk_1510.hw, CK_1510 | CK_310), + CLK(NULL, "mclk", &mclk_16xx.hw, CK_16XX), + CLK(NULL, "bclk", &bclk_1510.hw, CK_1510 | CK_310), + CLK(NULL, "bclk", &bclk_16xx.hw, CK_16XX), + CLK("mmci-omap.0", "fck", &mmc1_ck.hw, CK_16XX | CK_1510 | CK_310), + CLK("mmci-omap.0", "fck", &mmc3_ck.hw, CK_7XX), + CLK("mmci-omap.0", "ick", &armper_ck.clk.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK("mmci-omap.1", "fck", &mmc2_ck.hw, CK_16XX), + CLK("mmci-omap.1", "ick", &armper_ck.clk.hw, CK_16XX), /* Virtual clocks */ - CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), - CLK("omap_i2c.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK("omap_i2c.1", "ick", &i2c_ick, CK_16XX), - CLK("omap_i2c.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX), - CLK("omap1_spi100k.1", "fck", &dummy_ck, CK_7XX), - CLK("omap1_spi100k.1", "ick", &dummy_ck, CK_7XX), - CLK("omap1_spi100k.2", "fck", &dummy_ck, CK_7XX), - CLK("omap1_spi100k.2", "ick", &dummy_ck, CK_7XX), - CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), - CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX), - CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.3", "ick", &dspper_ck, CK_16XX), - CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.1", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.2", "fck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.3", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "mpu", &virtual_ck_mpu.hw, CK_16XX | CK_1510 | CK_310), + CLK("omap_i2c.1", "fck", &i2c_fck.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK("omap_i2c.1", "ick", &i2c_ick.hw, CK_16XX), + CLK("omap_i2c.1", "ick", &dummy_ck.hw, CK_1510 | CK_310 | CK_7XX), + CLK("omap1_spi100k.1", "fck", &dummy_ck.hw, CK_7XX), + CLK("omap1_spi100k.1", "ick", &dummy_ck.hw, CK_7XX), + CLK("omap1_spi100k.2", "fck", &dummy_ck.hw, CK_7XX), + CLK("omap1_spi100k.2", "ick", &dummy_ck.hw, CK_7XX), + CLK("omap_uwire", "fck", &armxor_ck.clk.hw, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.1", "ick", &dspper_ck.hw, CK_16XX), + CLK("omap-mcbsp.1", "ick", &dummy_ck.hw, CK_1510 | CK_310), + CLK("omap-mcbsp.2", "ick", &armper_ck.clk.hw, CK_16XX), + CLK("omap-mcbsp.2", "ick", &dummy_ck.hw, CK_1510 | CK_310), + CLK("omap-mcbsp.3", "ick", &dspper_ck.hw, CK_16XX), + CLK("omap-mcbsp.3", "ick", &dummy_ck.hw, CK_1510 | CK_310), + CLK("omap-mcbsp.1", "fck", &dspxor_ck.hw, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.2", "fck", &armper_ck.clk.hw, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.3", "fck", &dspxor_ck.hw, CK_16XX | CK_1510 | CK_310), }; /* @@ -763,15 +694,14 @@ u32 cpu_mask; int __init omap1_clk_init(void) { struct omap_clk *c; - int crystal_type = 0; /* Default 12 MHz */ u32 reg; #ifdef CONFIG_DEBUG_LL - /* - * Resets some clocks that may be left on from bootloader, - * but leaves serial clocks on. - */ - omap_writel(0x3 << 29, MOD_CONF_CTRL_0); + /* Make sure UART clocks are enabled early */ + if (cpu_is_omap16xx()) + omap_writel(omap_readl(MOD_CONF_CTRL_0) | + CONF_MOD_UART1_CLK_MODE_R | + CONF_MOD_UART3_CLK_MODE_R, MOD_CONF_CTRL_0); #endif /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ @@ -783,9 +713,6 @@ int __init omap1_clk_init(void) /* By default all idlect1 clocks are allowed to idle */ arm_idlect1_mask = ~0; - for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) - clk_preinit(c->lk.clk); - cpu_mask = 0; if (cpu_is_omap1710()) cpu_mask |= CK_1710; @@ -798,27 +725,19 @@ int __init omap1_clk_init(void) if (cpu_is_omap310()) cpu_mask |= CK_310; - for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) - if (c->cpu & cpu_mask) { - clkdev_add(&c->lk); - clk_register(c->lk.clk); - } - /* Pointers to these clocks are needed by code in clock.c */ - api_ck_p = clk_get(NULL, "api_ck"); - ck_dpll1_p = clk_get(NULL, "ck_dpll1"); - ck_ref_p = clk_get(NULL, "ck_ref"); + api_ck_p = &api_ck.clk; + ck_dpll1_p = &ck_dpll1; + ck_ref_p = &ck_ref; if (cpu_is_omap7xx()) ck_ref.rate = 13000000; - if (cpu_is_omap16xx() && crystal_type == 2) - ck_ref.rate = 19200000; pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), omap_readw(ARM_CKCTL)); - /* We want to be in syncronous scalable mode */ + /* We want to be in synchronous scalable mode */ omap_writew(0x1000, ARM_SYSST); @@ -851,10 +770,7 @@ int __init omap1_clk_init(void) } } } - propagate_rate(&ck_dpll1); - /* Cache rates for clocks connected to ck_ref (not dpll1) */ - propagate_rate(&ck_ref); - omap1_show_rates(); + if (machine_is_omap_perseus2() || machine_is_omap_fsample()) { /* Select slicer output as OMAP input clock */ omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, @@ -886,16 +802,28 @@ int __init omap1_clk_init(void) */ omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */ - /* - * Only enable those clocks we will need, let the drivers - * enable other clocks as necessary - */ - clk_enable(&armper_ck.clk); - clk_enable(&armxor_ck.clk); - clk_enable(&armtim_ck.clk); /* This should be done by timer code */ + for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) { + if (!(c->cpu & cpu_mask)) + continue; + + if (c->lk.clk_hw->init) { /* NULL if provider already registered */ + const struct clk_init_data *init = c->lk.clk_hw->init; + const char *name = c->lk.clk_hw->init->name; + int err; + + err = clk_hw_register(NULL, c->lk.clk_hw); + if (err < 0) { + pr_err("failed to register clock \"%s\"! (%d)\n", name, err); + /* may be tried again, restore init data */ + c->lk.clk_hw->init = init; + continue; + } + } + + clk_hw_register_clkdev(c->lk.clk_hw, c->lk.con_id, c->lk.dev_id); + } - if (cpu_is_omap15xx()) - clk_enable(&arm_gpio_ck); + omap1_show_rates(); return 0; } @@ -907,7 +835,7 @@ void __init omap1_clk_late_init(void) unsigned long rate = ck_dpll1.rate; /* Find the highest supported frequency and enable it */ - if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { + if (omap1_select_table_rate(&virtual_ck_mpu, ~0, arm_ck.rate)) { pr_err("System frequencies not set, using default. Check your config.\n"); /* * Reprogramming the DPLL is tricky, it must be done from SRAM. diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index 504b959ba5cf..5ceff05e15c0 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -31,8 +31,7 @@ #include <asm/exception.h> -#include <mach/irqs.h> - +#include "irqs.h" #include "soc.h" #include "i2c.h" diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index eb0f09edb3d1..80e94770582a 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -14,15 +14,15 @@ #include <linux/spi/spi.h> #include <linux/platform_data/omap-wd-timer.h> +#include <linux/soc/ti/omap1-io.h> #include <asm/mach/map.h> -#include <mach/tc.h> -#include <mach/mux.h> - -#include <mach/omap7xx.h> -#include <mach/hardware.h> +#include "tc.h" +#include "mux.h" +#include "omap7xx.h" +#include "hardware.h" #include "common.h" #include "clock.h" #include "mmc.h" @@ -356,7 +356,7 @@ static int __init omap1_init_devices(void) if (!cpu_class_is_omap1()) return -ENODEV; - omap_sram_init(); + omap1_sram_init(); omap1_clk_late_init(); /* please keep these calls, and their implementations above, diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 2bf659fb6099..c3f280c3c5d7 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -24,7 +24,7 @@ #include <linux/dma-mapping.h> #include <linux/dmaengine.h> #include <linux/omap-dma.h> -#include <mach/tc.h> +#include "tc.h" #include "soc.h" diff --git a/arch/arm/mach-omap1/fb.c b/arch/arm/mach-omap1/fb.c index 0e32a959f254..b6e952b03838 100644 --- a/arch/arm/mach-omap1/fb.c +++ b/arch/arm/mach-omap1/fb.c @@ -17,9 +17,12 @@ #include <linux/io.h> #include <linux/omapfb.h> #include <linux/dma-mapping.h> +#include <linux/irq.h> #include <asm/mach/map.h> +#include "irqs.h" + #if IS_ENABLED(CONFIG_FB_OMAP) static bool omapfb_lcd_configured; @@ -27,6 +30,19 @@ static struct omapfb_platform_data omapfb_config; static u64 omap_fb_dma_mask = ~(u32)0; +static struct resource omap_fb_resources[] = { + { + .name = "irq", + .start = INT_LCD_CTRL, + .flags = IORESOURCE_IRQ, + }, + { + .name = "irq", + .start = INT_SOSSI_MATCH, + .flags = IORESOURCE_IRQ, + }, +}; + static struct platform_device omap_fb_device = { .name = "omapfb", .id = -1, @@ -35,7 +51,8 @@ static struct platform_device omap_fb_device = { .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &omapfb_config, }, - .num_resources = 0, + .num_resources = ARRAY_SIZE(omap_fb_resources), + .resource = omap_fb_resources, }; void __init omapfb_set_lcd_config(const struct omap_lcd_config *config) diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c index 40e43ce5329f..0a3ddb3b66eb 100644 --- a/arch/arm/mach-omap1/flash.c +++ b/arch/arm/mach-omap1/flash.c @@ -6,11 +6,12 @@ #include <linux/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> +#include <linux/soc/ti/omap1-io.h> + +#include "tc.h" -#include <mach/tc.h> #include "flash.h" -#include <mach/hardware.h> void omap1_set_vpp(struct platform_device *pdev, int enable) { diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index f03ed523f20f..4c71a195969f 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -24,8 +24,7 @@ #include <asm/irq.h> #include <asm/mach/irq.h> -#include <mach/hardware.h> - +#include "hardware.h" #include "iomap.h" #include "common.h" #include "fpga.h" diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 3ec08bd5d8a0..3faf2b7c2d09 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -18,8 +18,9 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/soc/ti/omap1-soc.h> -#include <mach/irqs.h> +#include "irqs.h" #define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE #define OMAP1510_GPIO_BASE 0xFFFCE000 diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 500cfd416c42..2a25751007d4 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -18,9 +18,10 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/soc/ti/omap1-io.h> -#include <mach/irqs.h> - +#include "hardware.h" +#include "irqs.h" #include "soc.h" #define OMAP1610_GPIO1_BASE 0xfffbe400 diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index aeb81c18ffcc..46b7d5d4d255 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -19,8 +19,7 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> -#include <mach/irqs.h> - +#include "irqs.h" #include "soc.h" #define OMAP7XX_GPIO1_BASE 0xfffbc000 diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/hardware.h index e7c8ac7d83e3..c228234a1ed4 100644 --- a/arch/arm/mach-omap1/include/mach/hardware.h +++ b/arch/arm/mach-omap1/hardware.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-omap1/include/mach/hardware.h - * * Hardware definitions for TI OMAP processors and boards * * NOTE: Please put device driver specific defines into a separate header @@ -37,21 +35,12 @@ #define __ASM_ARCH_OMAP_HARDWARE_H #include <linux/sizes.h> +#include <linux/soc/ti/omap1-io.h> #ifndef __ASSEMBLER__ #include <asm/types.h> -#include <mach/soc.h> +#include <linux/soc/ti/omap1-soc.h> -/* - * NOTE: Please use ioremap + __raw_read/write where possible instead of these - */ -extern u8 omap_readb(u32 pa); -extern u16 omap_readw(u32 pa); -extern u32 omap_readl(u32 pa); -extern void omap_writeb(u8 v, u32 pa); -extern void omap_writew(u16 v, u32 pa); -extern void omap_writel(u32 v, u32 pa); - -#include <mach/tc.h> +#include "tc.h" /* Almost all documentation for chip and board memory maps assumes * BM is clear. Most devel boards have a switch to control booting @@ -72,10 +61,10 @@ static inline u32 omap_cs3_phys(void) #endif /* ifndef __ASSEMBLER__ */ -#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ +#define OMAP1_IO_OFFSET 0x00f00000 /* Virtual IO = 0xff0b0000 */ #define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) -#include <mach/serial.h> +#include "serial.h" /* * --------------------------------------------------------------------------- @@ -99,66 +88,6 @@ static inline u32 omap_cs3_phys(void) #define MPU_TIMER_ST (1 << 0) /* - * ---------------------------------------------------------------------------- - * Clocks - * ---------------------------------------------------------------------------- - */ -#define CLKGEN_REG_BASE (0xfffece00) -#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) -#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) -#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) -#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) -#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) -#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) -#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) -#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) - -#define CK_RATEF 1 -#define CK_IDLEF 2 -#define CK_ENABLEF 4 -#define CK_SELECTF 8 -#define SETARM_IDLE_SHIFT - -/* DPLL control registers */ -#define DPLL_CTL (0xfffecf00) - -/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ -#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000) -#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) -#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) -#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) -#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) - -/* - * --------------------------------------------------------------------------- - * UPLD - * --------------------------------------------------------------------------- - */ -#define ULPD_REG_BASE (0xfffe0800) -#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) -#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) -#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) -# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ -# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ -#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) -# define SOFT_UDC_REQ (1 << 4) -# define SOFT_USB_CLK_REQ (1 << 3) -# define SOFT_DPLL_REQ (1 << 0) -#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) -#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) -#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) -#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) -#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) -# define DIS_MMC2_DPLL_REQ (1 << 11) -# define DIS_MMC1_DPLL_REQ (1 << 10) -# define DIS_UART3_DPLL_REQ (1 << 9) -# define DIS_UART2_DPLL_REQ (1 << 8) -# define DIS_UART1_DPLL_REQ (1 << 7) -# define DIS_USB_HOST_DPLL_REQ (1 << 6) -#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) -#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) - -/* * --------------------------------------------------------------------------- * Watchdog timer * --------------------------------------------------------------------------- @@ -213,52 +142,6 @@ static inline u32 omap_cs3_phys(void) #endif -/* - * ---------------------------------------------------------------------------- - * System control registers - * ---------------------------------------------------------------------------- - */ -#define MOD_CONF_CTRL_0 0xfffe1080 -#define MOD_CONF_CTRL_1 0xfffe1110 - -/* - * ---------------------------------------------------------------------------- - * Pin multiplexing registers - * ---------------------------------------------------------------------------- - */ -#define FUNC_MUX_CTRL_0 0xfffe1000 -#define FUNC_MUX_CTRL_1 0xfffe1004 -#define FUNC_MUX_CTRL_2 0xfffe1008 -#define COMP_MODE_CTRL_0 0xfffe100c -#define FUNC_MUX_CTRL_3 0xfffe1010 -#define FUNC_MUX_CTRL_4 0xfffe1014 -#define FUNC_MUX_CTRL_5 0xfffe1018 -#define FUNC_MUX_CTRL_6 0xfffe101C -#define FUNC_MUX_CTRL_7 0xfffe1020 -#define FUNC_MUX_CTRL_8 0xfffe1024 -#define FUNC_MUX_CTRL_9 0xfffe1028 -#define FUNC_MUX_CTRL_A 0xfffe102C -#define FUNC_MUX_CTRL_B 0xfffe1030 -#define FUNC_MUX_CTRL_C 0xfffe1034 -#define FUNC_MUX_CTRL_D 0xfffe1038 -#define PULL_DWN_CTRL_0 0xfffe1040 -#define PULL_DWN_CTRL_1 0xfffe1044 -#define PULL_DWN_CTRL_2 0xfffe1048 -#define PULL_DWN_CTRL_3 0xfffe104c -#define PULL_DWN_CTRL_4 0xfffe10ac - -/* OMAP-1610 specific multiplexing registers */ -#define FUNC_MUX_CTRL_E 0xfffe1090 -#define FUNC_MUX_CTRL_F 0xfffe1094 -#define FUNC_MUX_CTRL_10 0xfffe1098 -#define FUNC_MUX_CTRL_11 0xfffe109c -#define FUNC_MUX_CTRL_12 0xfffe10a0 -#define PU_PD_SEL_0 0xfffe10b4 -#define PU_PD_SEL_1 0xfffe10b8 -#define PU_PD_SEL_2 0xfffe10bc -#define PU_PD_SEL_3 0xfffe10c0 -#define PU_PD_SEL_4 0xfffe10c4 - /* Timer32K for 1610 and 1710*/ #define OMAP_TIMER32K_BASE 0xFFFBC400 @@ -300,15 +183,6 @@ static inline u32 omap_cs3_phys(void) #define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) /* - * ---------------------------------------------------------------------------- - * Pulse-Width Light - * ---------------------------------------------------------------------------- - */ -#define OMAP_PWL_BASE 0xfffb5800 -#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00) -#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04) - -/* * --------------------------------------------------------------------------- * Processor specific defines * --------------------------------------------------------------------------- diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c index 5e6d81b1624c..22f945360599 100644 --- a/arch/arm/mach-omap1/i2c.c +++ b/arch/arm/mach-omap1/i2c.c @@ -7,8 +7,10 @@ #include <linux/i2c.h> #include <linux/platform_data/i2c-omap.h> -#include <mach/mux.h> + +#include "mux.h" #include "soc.h" +#include "i2c.h" #define OMAP_I2C_SIZE 0x3f #define OMAP1_I2C_BASE 0xfffb3800 diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index 91556e374152..c3bb1b71fdf3 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -12,12 +12,11 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/soc/ti/omap1-io.h> #include <asm/system_info.h> #include "soc.h" - -#include <mach/hardware.h> - +#include "hardware.h" #include "common.h" #define OMAP_DIE_ID_0 0xfffe1800 diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h deleted file mode 100644 index ce4f8005b26f..000000000000 --- a/arch/arm/mach-omap1/include/mach/io.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/io.h - * - * IO definitions for TI OMAP processors and boards - * - * Copied from arch/arm/mach-sa1100/include/mach/io.h - * Copyright (C) 1997-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Modifications: - * 06-12-1997 RMK Created. - * 07-04-1999 RMK Major cleanup - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) __typesafe_io(a) - -#endif diff --git a/arch/arm/mach-omap1/include/mach/lcd_dma.h b/arch/arm/mach-omap1/include/mach/lcd_dma.h deleted file mode 100644 index 1a3c0cf17899..000000000000 --- a/arch/arm/mach-omap1/include/mach/lcd_dma.h +++ /dev/null @@ -1,65 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * arch/arm/mach-omap1/include/mach/lcd_dma.h - * - * Extracted from arch/arm/plat-omap/include/plat/dma.h - * Copyright (C) 2003 Nokia Corporation - * Author: Juha Yrjölä <juha.yrjola@nokia.com> - */ -#ifndef __MACH_OMAP1_LCD_DMA_H__ -#define __MACH_OMAP1_LCD_DMA_H__ - -/* Hardware registers for LCD DMA */ -#define OMAP1510_DMA_LCD_BASE (0xfffedb00) -#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00) -#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02) -#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04) -#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06) -#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08) - -#define OMAP1610_DMA_LCD_BASE (0xfffee300) -#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0) -#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2) -#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4) -#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8) -#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca) -#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc) -#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce) -#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0) -#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2) -#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4) -#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6) -#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8) -#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda) -#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0) -#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4) -#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea) -#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4) - -/* LCD DMA block numbers */ -enum { - OMAP_LCD_DMA_B1_TOP, - OMAP_LCD_DMA_B1_BOTTOM, - OMAP_LCD_DMA_B2_TOP, - OMAP_LCD_DMA_B2_BOTTOM -}; - -/* LCD DMA functions */ -extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data), - void *data); -extern void omap_free_lcd_dma(void); -extern void omap_setup_lcd_dma(void); -extern void omap_enable_lcd_dma(void); -extern void omap_stop_lcd_dma(void); -extern void omap_set_lcd_dma_ext_controller(int external); -extern void omap_set_lcd_dma_single_transfer(int single); -extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, - int data_type); -extern void omap_set_lcd_dma_b1_rotation(int rotate); -extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres); -extern void omap_set_lcd_dma_b1_mirror(int mirror); -extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale); - -extern int omap_lcd_dma_running(void); - -#endif /* __MACH_OMAP1_LCD_DMA_H__ */ diff --git a/arch/arm/mach-omap1/include/mach/lcdc.h b/arch/arm/mach-omap1/include/mach/lcdc.h deleted file mode 100644 index 7152db1f5361..000000000000 --- a/arch/arm/mach-omap1/include/mach/lcdc.h +++ /dev/null @@ -1,44 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * arch/arm/mach-omap1/include/mach/lcdc.h - * - * Extracted from drivers/video/omap/lcdc.c - * Copyright (C) 2004 Nokia Corporation - * Author: Imre Deak <imre.deak@nokia.com> - */ -#ifndef __MACH_LCDC_H__ -#define __MACH_LCDC_H__ - -#define OMAP_LCDC_BASE 0xfffec000 -#define OMAP_LCDC_SIZE 256 -#define OMAP_LCDC_IRQ INT_LCD_CTRL - -#define OMAP_LCDC_CONTROL (OMAP_LCDC_BASE + 0x00) -#define OMAP_LCDC_TIMING0 (OMAP_LCDC_BASE + 0x04) -#define OMAP_LCDC_TIMING1 (OMAP_LCDC_BASE + 0x08) -#define OMAP_LCDC_TIMING2 (OMAP_LCDC_BASE + 0x0c) -#define OMAP_LCDC_STATUS (OMAP_LCDC_BASE + 0x10) -#define OMAP_LCDC_SUBPANEL (OMAP_LCDC_BASE + 0x14) -#define OMAP_LCDC_LINE_INT (OMAP_LCDC_BASE + 0x18) -#define OMAP_LCDC_DISPLAY_STATUS (OMAP_LCDC_BASE + 0x1c) - -#define OMAP_LCDC_STAT_DONE (1 << 0) -#define OMAP_LCDC_STAT_VSYNC (1 << 1) -#define OMAP_LCDC_STAT_SYNC_LOST (1 << 2) -#define OMAP_LCDC_STAT_ABC (1 << 3) -#define OMAP_LCDC_STAT_LINE_INT (1 << 4) -#define OMAP_LCDC_STAT_FUF (1 << 5) -#define OMAP_LCDC_STAT_LOADED_PALETTE (1 << 6) - -#define OMAP_LCDC_CTRL_LCD_EN (1 << 0) -#define OMAP_LCDC_CTRL_LCD_TFT (1 << 7) -#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL (1 << 10) - -#define OMAP_LCDC_IRQ_VSYNC (1 << 2) -#define OMAP_LCDC_IRQ_DONE (1 << 3) -#define OMAP_LCDC_IRQ_LOADED_PALETTE (1 << 4) -#define OMAP_LCDC_IRQ_LINE_NIRQ (1 << 5) -#define OMAP_LCDC_IRQ_LINE (1 << 6) -#define OMAP_LCDC_IRQ_MASK (((1 << 5) - 1) << 2) - -#endif /* __MACH_LCDC_H__ */ diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h deleted file mode 100644 index ba3a350479c8..000000000000 --- a/arch/arm/mach-omap1/include/mach/memory.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-omap1/include/mach/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* REVISIT: omap1 legacy drivers still rely on this */ -#include <mach/soc.h> - -#endif diff --git a/arch/arm/mach-omap1/include/mach/mux.h b/arch/arm/mach-omap1/include/mach/mux.h deleted file mode 100644 index 3f6dc55d9898..000000000000 --- a/arch/arm/mach-omap1/include/mach/mux.h +++ /dev/null @@ -1,441 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * arch/arm/plat-omap/include/mach/mux.h - * - * Table of the Omap register configurations for the FUNC_MUX and - * PULL_DWN combinations. - * - * Copyright (C) 2004 - 2008 Texas Instruments Inc. - * Copyright (C) 2003 - 2008 Nokia Corporation - * - * Written by Tony Lindgren - * - * NOTE: Please use the following naming style for new pin entries. - * For example, W8_1610_MMC2_DAT0, where: - * - W8 = ball - * - 1610 = 1510 or 1610, none if common for both 1510 and 1610 - * - MMC2_DAT0 = function - */ - -#ifndef __ASM_ARCH_MUX_H -#define __ASM_ARCH_MUX_H - -#define PU_PD_SEL_NA 0 /* No pu_pd reg available */ -#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */ - -#ifdef CONFIG_OMAP_MUX_DEBUG -#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \ - .mux_reg = FUNC_MUX_CTRL_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \ - .pull_reg = PULL_DWN_CTRL_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \ - .pu_pd_reg = PU_PD_SEL_##reg, \ - .pu_pd_val = status, - -#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \ - .mux_reg = OMAP7XX_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_7XX(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \ - .pull_reg = OMAP7XX_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#else - -#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \ - .pu_pd_val = status, - -#define MUX_REG_7XX(reg, mode_offset, mode) \ - .mux_reg = OMAP7XX_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_7XX(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#endif /* CONFIG_OMAP_MUX_DEBUG */ - -#define MUX_CFG(desc, mux_reg, mode_offset, mode, \ - pull_reg, pull_bit, pull_status, \ - pu_pd_reg, pu_pd_status, debug_status) \ -{ \ - .name = desc, \ - .debug = debug_status, \ - MUX_REG(mux_reg, mode_offset, mode) \ - PULL_REG(pull_reg, pull_bit, pull_status) \ - PU_PD_REG(pu_pd_reg, pu_pd_status) \ -}, - - -/* - * OMAP730/850 has a slightly different config for the pin mux. - * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and - * not the FUNC_MUX_CTRL_x regs from hardware.h - * - for pull-up/down, only has one enable bit which is in the same register - * as mux config - */ -#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \ - pull_bit, pull_status, debug_status)\ -{ \ - .name = desc, \ - .debug = debug_status, \ - MUX_REG_7XX(mux_reg, mode_offset, mode) \ - PULL_REG_7XX(mux_reg, pull_bit, pull_status) \ - PU_PD_REG(NA, 0) \ -}, - -struct pin_config { - char *name; - const unsigned int mux_reg; - unsigned char debug; - - const unsigned char mask_offset; - const unsigned char mask; - - const char *pull_name; - const unsigned int pull_reg; - const unsigned char pull_val; - const unsigned char pull_bit; - - const char *pu_pd_name; - const unsigned int pu_pd_reg; - const unsigned char pu_pd_val; - -#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) - const char *mux_reg_name; -#endif - -}; - -enum omap7xx_index { - /* OMAP 730 keyboard */ - E2_7XX_KBR0, - J7_7XX_KBR1, - E1_7XX_KBR2, - F3_7XX_KBR3, - D2_7XX_KBR4, - C2_7XX_KBC0, - D3_7XX_KBC1, - E4_7XX_KBC2, - F4_7XX_KBC3, - E3_7XX_KBC4, - - /* USB */ - AA17_7XX_USB_DM, - W16_7XX_USB_PU_EN, - W17_7XX_USB_VBUSI, - W18_7XX_USB_DMCK_OUT, - W19_7XX_USB_DCRST, - - /* MMC */ - MMC_7XX_CMD, - MMC_7XX_CLK, - MMC_7XX_DAT0, - - /* I2C */ - I2C_7XX_SCL, - I2C_7XX_SDA, - - /* SPI */ - SPI_7XX_1, - SPI_7XX_2, - SPI_7XX_3, - SPI_7XX_4, - SPI_7XX_5, - SPI_7XX_6, - - /* UART */ - UART_7XX_1, - UART_7XX_2, -}; - -enum omap1xxx_index { - /* UART1 (BT_UART_GATING)*/ - UART1_TX = 0, - UART1_RTS, - - /* UART2 (COM_UART_GATING)*/ - UART2_TX, - UART2_RX, - UART2_CTS, - UART2_RTS, - - /* UART3 (GIGA_UART_GATING) */ - UART3_TX, - UART3_RX, - UART3_CTS, - UART3_RTS, - UART3_CLKREQ, - UART3_BCLK, /* 12MHz clock out */ - Y15_1610_UART3_RTS, - - /* PWT & PWL */ - PWT, - PWL, - - /* USB master generic */ - R18_USB_VBUS, - R18_1510_USB_GPIO0, - W4_USB_PUEN, - W4_USB_CLKO, - W4_USB_HIGHZ, - W4_GPIO58, - - /* USB1 master */ - USB1_SUSP, - USB1_SEO, - W13_1610_USB1_SE0, - USB1_TXEN, - USB1_TXD, - USB1_VP, - USB1_VM, - USB1_RCV, - USB1_SPEED, - R13_1610_USB1_SPEED, - R13_1710_USB1_SE0, - - /* USB2 master */ - USB2_SUSP, - USB2_VP, - USB2_TXEN, - USB2_VM, - USB2_RCV, - USB2_SEO, - USB2_TXD, - - /* OMAP-1510 GPIO */ - R18_1510_GPIO0, - R19_1510_GPIO1, - M14_1510_GPIO2, - - /* OMAP1610 GPIO */ - P18_1610_GPIO3, - Y15_1610_GPIO17, - - /* OMAP-1710 GPIO */ - R18_1710_GPIO0, - V2_1710_GPIO10, - N21_1710_GPIO14, - W15_1710_GPIO40, - - /* MPUIO */ - MPUIO2, - N15_1610_MPUIO2, - MPUIO4, - MPUIO5, - T20_1610_MPUIO5, - W11_1610_MPUIO6, - V10_1610_MPUIO7, - W11_1610_MPUIO9, - V10_1610_MPUIO10, - W10_1610_MPUIO11, - E20_1610_MPUIO13, - U20_1610_MPUIO14, - E19_1610_MPUIO15, - - /* MCBSP2 */ - MCBSP2_CLKR, - MCBSP2_CLKX, - MCBSP2_DR, - MCBSP2_DX, - MCBSP2_FSR, - MCBSP2_FSX, - - /* MCBSP3 */ - MCBSP3_CLKX, - - /* Misc ballouts */ - BALLOUT_V8_ARMIO3, - N20_HDQ, - - /* OMAP-1610 MMC2 */ - W8_1610_MMC2_DAT0, - V8_1610_MMC2_DAT1, - W15_1610_MMC2_DAT2, - R10_1610_MMC2_DAT3, - Y10_1610_MMC2_CLK, - Y8_1610_MMC2_CMD, - V9_1610_MMC2_CMDDIR, - V5_1610_MMC2_DATDIR0, - W19_1610_MMC2_DATDIR1, - R18_1610_MMC2_CLKIN, - - /* OMAP-1610 External Trace Interface */ - M19_1610_ETM_PSTAT0, - L15_1610_ETM_PSTAT1, - L18_1610_ETM_PSTAT2, - L19_1610_ETM_D0, - J19_1610_ETM_D6, - J18_1610_ETM_D7, - - /* OMAP16XX GPIO */ - P20_1610_GPIO4, - V9_1610_GPIO7, - W8_1610_GPIO9, - N20_1610_GPIO11, - N19_1610_GPIO13, - P10_1610_GPIO22, - V5_1610_GPIO24, - AA20_1610_GPIO_41, - W19_1610_GPIO48, - M7_1610_GPIO62, - V14_16XX_GPIO37, - R9_16XX_GPIO18, - L14_16XX_GPIO49, - - /* OMAP-1610 uWire */ - V19_1610_UWIRE_SCLK, - U18_1610_UWIRE_SDI, - W21_1610_UWIRE_SDO, - N14_1610_UWIRE_CS0, - P15_1610_UWIRE_CS3, - N15_1610_UWIRE_CS1, - - /* OMAP-1610 SPI */ - U19_1610_SPIF_SCK, - U18_1610_SPIF_DIN, - P20_1610_SPIF_DIN, - W21_1610_SPIF_DOUT, - R18_1610_SPIF_DOUT, - N14_1610_SPIF_CS0, - N15_1610_SPIF_CS1, - T19_1610_SPIF_CS2, - P15_1610_SPIF_CS3, - - /* OMAP-1610 Flash */ - L3_1610_FLASH_CS2B_OE, - M8_1610_FLASH_CS2B_WE, - - /* First MMC */ - MMC_CMD, - MMC_DAT1, - MMC_DAT2, - MMC_DAT0, - MMC_CLK, - MMC_DAT3, - - /* OMAP-1710 MMC CMDDIR and DATDIR0 */ - M15_1710_MMC_CLKI, - P19_1710_MMC_CMDDIR, - P20_1710_MMC_DATDIR0, - - /* OMAP-1610 USB0 alternate pin configuration */ - W9_USB0_TXEN, - AA9_USB0_VP, - Y5_USB0_RCV, - R9_USB0_VM, - V6_USB0_TXD, - W5_USB0_SE0, - V9_USB0_SPEED, - V9_USB0_SUSP, - - /* USB2 */ - W9_USB2_TXEN, - AA9_USB2_VP, - Y5_USB2_RCV, - R9_USB2_VM, - V6_USB2_TXD, - W5_USB2_SE0, - - /* 16XX UART */ - R13_1610_UART1_TX, - V14_16XX_UART1_RX, - R14_1610_UART1_CTS, - AA15_1610_UART1_RTS, - R9_16XX_UART2_RX, - L14_16XX_UART3_RX, - - /* I2C OMAP-1610 */ - I2C_SCL, - I2C_SDA, - - /* Keypad */ - F18_1610_KBC0, - D20_1610_KBC1, - D19_1610_KBC2, - E18_1610_KBC3, - C21_1610_KBC4, - G18_1610_KBR0, - F19_1610_KBR1, - H14_1610_KBR2, - E20_1610_KBR3, - E19_1610_KBR4, - N19_1610_KBR5, - - /* Power management */ - T20_1610_LOW_PWR, - - /* MCLK Settings */ - V5_1710_MCLK_ON, - V5_1710_MCLK_OFF, - R10_1610_MCLK_ON, - R10_1610_MCLK_OFF, - - /* CompactFlash controller */ - P11_1610_CF_CD2, - R11_1610_CF_IOIS16, - V10_1610_CF_IREQ, - W10_1610_CF_RESET, - W11_1610_CF_CD1, - - /* parallel camera */ - J15_1610_CAM_LCLK, - J18_1610_CAM_D7, - J19_1610_CAM_D6, - J14_1610_CAM_D5, - K18_1610_CAM_D4, - K19_1610_CAM_D3, - K15_1610_CAM_D2, - K14_1610_CAM_D1, - L19_1610_CAM_D0, - L18_1610_CAM_VS, - L15_1610_CAM_HS, - M19_1610_CAM_RSTZ, - Y15_1610_CAM_OUTCLK, - - /* serial camera */ - H19_1610_CAM_EXCLK, - Y12_1610_CCP_CLKP, - W13_1610_CCP_CLKM, - W14_1610_CCP_DATAP, - Y14_1610_CCP_DATAM, - -}; - -struct omap_mux_cfg { - struct pin_config *pins; - unsigned long size; - int (*cfg_reg)(const struct pin_config *cfg); -}; - -#ifdef CONFIG_OMAP_MUX -/* setup pin muxing in Linux */ -extern int omap1_mux_init(void); -extern int omap_mux_register(struct omap_mux_cfg *); -extern int omap_cfg_reg(unsigned long reg_cfg); -#else -/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ -static inline int omap1_mux_init(void) { return 0; } -static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; } -#endif - -extern int omap2_mux_init(void); - -#endif diff --git a/arch/arm/mach-omap1/include/mach/soc.h b/arch/arm/mach-omap1/include/mach/soc.h deleted file mode 100644 index 1897cbabfc93..000000000000 --- a/arch/arm/mach-omap1/include/mach/soc.h +++ /dev/null @@ -1,220 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * OMAP cpu type detection - * - * Copyright (C) 2004, 2008 Nokia Corporation - * - * Copyright (C) 2009-11 Texas Instruments. - * - * Written by Tony Lindgren <tony.lindgren@nokia.com> - * - * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> - */ - -#ifndef __ASM_ARCH_OMAP_CPU_H -#define __ASM_ARCH_OMAP_CPU_H - -#include <asm/irq.h> -#include <mach/hardware.h> -#include <mach/irqs.h> - -#ifndef __ASSEMBLY__ - -#include <linux/bitops.h> - -/* - * Test if multicore OMAP support is needed - */ -#undef MULTI_OMAP1 -#undef OMAP_NAME - -#ifdef CONFIG_ARCH_OMAP730 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap730 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP850 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap850 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP15XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap1510 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP16XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap16xx -# endif -#endif - -/* - * omap_rev bits: - * CPU id bits (0730, 1510, 1710, 2422...) [31:16] - * CPU revision (See _REV_ defined in cpu.h) [15:08] - * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] - */ -unsigned int omap_rev(void); - -/* - * Get the CPU revision for OMAP devices - */ -#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) - -/* - * Macros to group OMAP into cpu classes. - * These can be used in most places. - * cpu_is_omap7xx(): True for OMAP730, OMAP850 - * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 - * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 - */ -#define GET_OMAP_CLASS (omap_rev() & 0xff) - -#define IS_OMAP_CLASS(class, id) \ -static inline int is_omap ##class (void) \ -{ \ - return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) - -#define IS_OMAP_SUBCLASS(subclass, id) \ -static inline int is_omap ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -IS_OMAP_CLASS(7xx, 0x07) -IS_OMAP_CLASS(15xx, 0x15) -IS_OMAP_CLASS(16xx, 0x16) - -#define cpu_is_omap7xx() 0 -#define cpu_is_omap15xx() 0 -#define cpu_is_omap16xx() 0 - -#if defined(MULTI_OMAP1) -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() is_omap15xx() -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() is_omap16xx() -# endif -#else -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() 1 -# endif -#endif - -/* - * Macros to detect individual cpu types. - * These are only rarely needed. - * cpu_is_omap310(): True for OMAP310 - * cpu_is_omap1510(): True for OMAP1510 - * cpu_is_omap1610(): True for OMAP1610 - * cpu_is_omap1611(): True for OMAP1611 - * cpu_is_omap5912(): True for OMAP5912 - * cpu_is_omap1621(): True for OMAP1621 - * cpu_is_omap1710(): True for OMAP1710 - */ -#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) - -#define IS_OMAP_TYPE(type, id) \ -static inline int is_omap ##type (void) \ -{ \ - return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ -} - -IS_OMAP_TYPE(310, 0x0310) -IS_OMAP_TYPE(1510, 0x1510) -IS_OMAP_TYPE(1610, 0x1610) -IS_OMAP_TYPE(1611, 0x1611) -IS_OMAP_TYPE(5912, 0x1611) -IS_OMAP_TYPE(1621, 0x1621) -IS_OMAP_TYPE(1710, 0x1710) - -#define cpu_is_omap310() 0 -#define cpu_is_omap1510() 0 -#define cpu_is_omap1610() 0 -#define cpu_is_omap5912() 0 -#define cpu_is_omap1611() 0 -#define cpu_is_omap1621() 0 -#define cpu_is_omap1710() 0 - -/* These are needed to compile common code */ -#ifdef CONFIG_ARCH_OMAP1 -#define cpu_is_omap242x() 0 -#define cpu_is_omap2430() 0 -#define cpu_is_omap243x() 0 -#define cpu_is_omap24xx() 0 -#define cpu_is_omap34xx() 0 -#define cpu_is_omap44xx() 0 -#define soc_is_omap54xx() 0 -#define soc_is_dra7xx() 0 -#define soc_is_am33xx() 0 -#define cpu_class_is_omap1() 1 -#define cpu_class_is_omap2() 0 -#endif - -/* - * Whether we have MULTI_OMAP1 or not, we still need to distinguish - * between 310 vs. 1510 and 1611B/5912 vs. 1710. - */ - -#if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap310 -# undef cpu_is_omap1510 -# define cpu_is_omap310() is_omap310() -# define cpu_is_omap1510() is_omap1510() -#endif - -#if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap1610 -# undef cpu_is_omap1611 -# undef cpu_is_omap5912 -# undef cpu_is_omap1621 -# undef cpu_is_omap1710 -# define cpu_is_omap1610() is_omap1610() -# define cpu_is_omap1611() is_omap1611() -# define cpu_is_omap5912() is_omap5912() -# define cpu_is_omap1621() is_omap1621() -# define cpu_is_omap1710() is_omap1710() -#endif - -#endif /* __ASSEMBLY__ */ -#endif diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h deleted file mode 100644 index 9cca6a56788f..000000000000 --- a/arch/arm/mach-omap1/include/mach/uncompress.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/uncompress.h - * - * Serial port stubs for kernel decompress status messages - * - * Initially based on: - * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Rewritten by: - * Author: <source@mvista.com> - * 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include <linux/types.h> -#include <linux/serial_reg.h> - -#include <asm/memory.h> -#include <asm/mach-types.h> - -#include "serial.h" - -#define MDR1_MODE_MASK 0x07 - -volatile u8 *uart_base; -int uart_shift; - -/* - * Store the DEBUG_LL uart number into memory. - * See also debug-macro.S, and serial.c for related code. - */ -static void set_omap_uart_info(unsigned char port) -{ - /* - * Get address of some.bss variable and round it down - * a la CONFIG_AUTO_ZRELADDR. - */ - u32 ram_start = (u32)&uart_shift & 0xf8000000; - u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); - *uart_info = port; -} - -static inline void putc(int c) -{ - if (!uart_base) - return; - - /* Check for UART 16x mode */ - if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0) - return; - - while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE)) - barrier(); - uart_base[UART_TX << uart_shift] = c; -} - -static inline void flush(void) -{ -} - -/* - * Macros to configure UART1 and debug UART - */ -#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ - if (machine_is_##mach()) { \ - uart_base = (volatile u8 *)(dbg_uart); \ - uart_shift = (dbg_shft); \ - port = (dbg_id); \ - set_omap_uart_info(port); \ - break; \ - } - -#define DEBUG_LL_OMAP7XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \ - OMAP1UART##p) - -#define DEBUG_LL_OMAP1(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP1UART##p) - -static inline void arch_decomp_setup(void) -{ - int port = 0; - - /* - * Initialize the port based on the machine ID from the bootloader. - * Note that we're using macros here instead of switch statement - * as machine_is functions are optimized out for the boards that - * are not selected. - */ - do { - /* omap7xx/8xx based boards using UART1 with shift 0 */ - DEBUG_LL_OMAP7XX(1, herald); - DEBUG_LL_OMAP7XX(1, omap_perseus2); - - /* omap15xx/16xx based boards using UART1 */ - DEBUG_LL_OMAP1(1, ams_delta); - DEBUG_LL_OMAP1(1, nokia770); - DEBUG_LL_OMAP1(1, omap_h2); - DEBUG_LL_OMAP1(1, omap_h3); - DEBUG_LL_OMAP1(1, omap_innovator); - DEBUG_LL_OMAP1(1, omap_osk); - DEBUG_LL_OMAP1(1, omap_palmte); - DEBUG_LL_OMAP1(1, omap_palmz71); - - /* omap15xx/16xx based boards using UART2 */ - DEBUG_LL_OMAP1(2, omap_palmtt); - - /* omap15xx/16xx based boards using UART3 */ - DEBUG_LL_OMAP1(3, sx1); - } while (0); -} diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h deleted file mode 100644 index 5429d86c7190..000000000000 --- a/arch/arm/mach-omap1/include/mach/usb.h +++ /dev/null @@ -1,128 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * FIXME correct answer depends on hmc_mode, - * as does (on omap1) any nonzero value for config->otg port number - */ -#if IS_ENABLED(CONFIG_USB_OMAP) -#define is_usb0_device(config) 1 -#else -#define is_usb0_device(config) 0 -#endif - -#include <linux/platform_data/usb-omap1.h> - -#if IS_ENABLED(CONFIG_USB_SUPPORT) -void omap1_usb_init(struct omap_usb_config *pdata); -#else -static inline void omap1_usb_init(struct omap_usb_config *pdata) -{ -} -#endif - -#define OMAP1_OTG_BASE 0xfffb0400 -#define OMAP1_UDC_BASE 0xfffb4000 -#define OMAP1_OHCI_BASE 0xfffba000 - -#define OMAP2_OHCI_BASE 0x4805e000 -#define OMAP2_UDC_BASE 0x4805e200 -#define OMAP2_OTG_BASE 0x4805e300 -#define OTG_BASE OMAP1_OTG_BASE -#define UDC_BASE OMAP1_UDC_BASE -#define OMAP_OHCI_BASE OMAP1_OHCI_BASE - -/* - * OTG and transceiver registers, for OMAPs starting with ARM926 - */ -#define OTG_REV (OTG_BASE + 0x00) -#define OTG_SYSCON_1 (OTG_BASE + 0x04) -# define USB2_TRX_MODE(w) (((w)>>24)&0x07) -# define USB1_TRX_MODE(w) (((w)>>20)&0x07) -# define USB0_TRX_MODE(w) (((w)>>16)&0x07) -# define OTG_IDLE_EN (1 << 15) -# define HST_IDLE_EN (1 << 14) -# define DEV_IDLE_EN (1 << 13) -# define OTG_RESET_DONE (1 << 2) -# define OTG_SOFT_RESET (1 << 1) -#define OTG_SYSCON_2 (OTG_BASE + 0x08) -# define OTG_EN (1 << 31) -# define USBX_SYNCHRO (1 << 30) -# define OTG_MST16 (1 << 29) -# define SRP_GPDATA (1 << 28) -# define SRP_GPDVBUS (1 << 27) -# define SRP_GPUVBUS(w) (((w)>>24)&0x07) -# define A_WAIT_VRISE(w) (((w)>>20)&0x07) -# define B_ASE_BRST(w) (((w)>>16)&0x07) -# define SRP_DPW (1 << 14) -# define SRP_DATA (1 << 13) -# define SRP_VBUS (1 << 12) -# define OTG_PADEN (1 << 10) -# define HMC_PADEN (1 << 9) -# define UHOST_EN (1 << 8) -# define HMC_TLLSPEED (1 << 7) -# define HMC_TLLATTACH (1 << 6) -# define OTG_HMC(w) (((w)>>0)&0x3f) -#define OTG_CTRL (OTG_BASE + 0x0c) -# define OTG_USB2_EN (1 << 29) -# define OTG_USB2_DP (1 << 28) -# define OTG_USB2_DM (1 << 27) -# define OTG_USB1_EN (1 << 26) -# define OTG_USB1_DP (1 << 25) -# define OTG_USB1_DM (1 << 24) -# define OTG_USB0_EN (1 << 23) -# define OTG_USB0_DP (1 << 22) -# define OTG_USB0_DM (1 << 21) -# define OTG_ASESSVLD (1 << 20) -# define OTG_BSESSEND (1 << 19) -# define OTG_BSESSVLD (1 << 18) -# define OTG_VBUSVLD (1 << 17) -# define OTG_ID (1 << 16) -# define OTG_DRIVER_SEL (1 << 15) -# define OTG_A_SETB_HNPEN (1 << 12) -# define OTG_A_BUSREQ (1 << 11) -# define OTG_B_HNPEN (1 << 9) -# define OTG_B_BUSREQ (1 << 8) -# define OTG_BUSDROP (1 << 7) -# define OTG_PULLDOWN (1 << 5) -# define OTG_PULLUP (1 << 4) -# define OTG_DRV_VBUS (1 << 3) -# define OTG_PD_VBUS (1 << 2) -# define OTG_PU_VBUS (1 << 1) -# define OTG_PU_ID (1 << 0) -#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ -# define DRIVER_SWITCH (1 << 15) -# define A_VBUS_ERR (1 << 13) -# define A_REQ_TMROUT (1 << 12) -# define A_SRP_DETECT (1 << 11) -# define B_HNP_FAIL (1 << 10) -# define B_SRP_TMROUT (1 << 9) -# define B_SRP_DONE (1 << 8) -# define B_SRP_STARTED (1 << 7) -# define OPRT_CHG (1 << 0) -#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ - // same bits as in IRQ_EN -#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ -# define OTGVPD (1 << 14) -# define OTGVPU (1 << 13) -# define OTGPUID (1 << 12) -# define USB2VDR (1 << 10) -# define USB2PDEN (1 << 9) -# define USB2PUEN (1 << 8) -# define USB1VDR (1 << 6) -# define USB1PDEN (1 << 5) -# define USB1PUEN (1 << 4) -# define USB0VDR (1 << 2) -# define USB0PDEN (1 << 1) -# define USB0PUEN (1 << 0) -#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ -#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ - -/*-------------------------------------------------------------------------*/ - -/* OMAP1 */ -#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) -# define CONF_USB2_UNI_R (1 << 8) -# define CONF_USB1_UNI_R (1 << 7) -# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) -# define CONF_USB0_ISOLATE_R (1 << 3) -# define CONF_USB_PWRDN_DM_R (1 << 2) -# define CONF_USB_PWRDN_DP_R (1 << 1) diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 5a173fc2a1ca..d2db9b8aed3f 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -9,17 +9,14 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/omap-dma.h> #include <asm/tlb.h> #include <asm/mach/map.h> -#include <mach/mux.h> -#include <mach/tc.h> -#include <linux/omap-dma.h> - +#include "tc.h" #include "iomap.h" #include "common.h" -#include "clock.h" /* * The machine specific code may provide the extra mapping besides the @@ -126,11 +123,6 @@ void __init omap1_init_early(void) */ omap_writew(0x0, MPU_PUBLIC_TIPB_CNTL); omap_writew(0x0, MPU_PRIVATE_TIPB_CNTL); - - /* Must init clocks early to assure that timer interrupt works - */ - omap1_clk_init(); - omap1_mux_init(); } void __init omap1_init_late(void) diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index ee6a93083154..70868e9f19ac 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -47,9 +47,7 @@ #include <asm/mach/irq.h> #include "soc.h" - -#include <mach/hardware.h> - +#include "hardware.h" #include "common.h" #define IRQ_BANK(irq) ((irq) >> 5) diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/irqs.h index 30bf007700cf..2851acfe5ff3 100644 --- a/arch/arm/mach-omap1/include/mach/irqs.h +++ b/arch/arm/mach-omap1/irqs.h @@ -1,7 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0-or-later */ /* - * arch/arm/plat-omap/include/mach/irqs.h - * * Copyright (C) Greg Lonnon 2001 * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com> * diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c deleted file mode 100644 index a72ac0c02b4f..000000000000 --- a/arch/arm/mach-omap1/lcd_dma.c +++ /dev/null @@ -1,441 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/lcd_dma.c - * - * Extracted from arch/arm/plat-omap/dma.c - * Copyright (C) 2003 - 2008 Nokia Corporation - * Author: Juha Yrjölä <juha.yrjola@nokia.com> - * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com> - * Graphics DMA and LCD DMA graphics tranformations - * by Imre Deak <imre.deak@nokia.com> - * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc. - * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com> - * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc. - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * Support functions for the OMAP internal DMA channels. - */ - -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/io.h> - -#include <linux/omap-dma.h> - -#include <mach/hardware.h> -#include <mach/lcdc.h> - -int omap_lcd_dma_running(void) -{ - /* - * On OMAP1510, internal LCD controller will start the transfer - * when it gets enabled, so assume DMA running if LCD enabled. - */ - if (cpu_is_omap15xx()) - if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN) - return 1; - - /* Check if LCD DMA is running */ - if (cpu_is_omap16xx()) - if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) - return 1; - - return 0; -} - -static struct lcd_dma_info { - spinlock_t lock; - int reserved; - void (*callback)(u16 status, void *data); - void *cb_data; - - int active; - unsigned long addr; - int rotate, data_type, xres, yres; - int vxres; - int mirror; - int xscale, yscale; - int ext_ctrl; - int src_port; - int single_transfer; -} lcd_dma; - -void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, - int data_type) -{ - lcd_dma.addr = addr; - lcd_dma.data_type = data_type; - lcd_dma.xres = fb_xres; - lcd_dma.yres = fb_yres; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1); - -void omap_set_lcd_dma_ext_controller(int external) -{ - lcd_dma.ext_ctrl = external; -} -EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller); - -void omap_set_lcd_dma_single_transfer(int single) -{ - lcd_dma.single_transfer = single; -} -EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); - -void omap_set_lcd_dma_b1_rotation(int rotate) -{ - if (cpu_is_omap15xx()) { - printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n"); - BUG(); - return; - } - lcd_dma.rotate = rotate; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation); - -void omap_set_lcd_dma_b1_mirror(int mirror) -{ - if (cpu_is_omap15xx()) { - printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n"); - BUG(); - } - lcd_dma.mirror = mirror; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); - -void omap_set_lcd_dma_b1_vxres(unsigned long vxres) -{ - if (cpu_is_omap15xx()) { - pr_err("DMA virtual resolution is not supported in 1510 mode\n"); - BUG(); - } - lcd_dma.vxres = vxres; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres); - -void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale) -{ - if (cpu_is_omap15xx()) { - printk(KERN_ERR "DMA scale is not supported in 1510 mode\n"); - BUG(); - } - lcd_dma.xscale = xscale; - lcd_dma.yscale = yscale; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale); - -static void set_b1_regs(void) -{ - unsigned long top, bottom; - int es; - u16 w; - unsigned long en, fn; - long ei, fi; - unsigned long vxres; - unsigned int xscale, yscale; - - switch (lcd_dma.data_type) { - case OMAP_DMA_DATA_TYPE_S8: - es = 1; - break; - case OMAP_DMA_DATA_TYPE_S16: - es = 2; - break; - case OMAP_DMA_DATA_TYPE_S32: - es = 4; - break; - default: - BUG(); - return; - } - - vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres; - xscale = lcd_dma.xscale ? lcd_dma.xscale : 1; - yscale = lcd_dma.yscale ? lcd_dma.yscale : 1; - BUG_ON(vxres < lcd_dma.xres); - -#define PIXADDR(x, y) (lcd_dma.addr + \ - ((y) * vxres * yscale + (x) * xscale) * es) -#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1) - - switch (lcd_dma.rotate) { - case 0: - if (!lcd_dma.mirror) { - top = PIXADDR(0, 0); - bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - /* 1510 DMA requires the bottom address to be 2 more - * than the actual last memory access location. */ - if (cpu_is_omap15xx() && - lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32) - bottom += 2; - ei = PIXSTEP(0, 0, 1, 0); - fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1); - } else { - top = PIXADDR(lcd_dma.xres - 1, 0); - bottom = PIXADDR(0, lcd_dma.yres - 1); - ei = PIXSTEP(1, 0, 0, 0); - fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1); - } - en = lcd_dma.xres; - fn = lcd_dma.yres; - break; - case 90: - if (!lcd_dma.mirror) { - top = PIXADDR(0, lcd_dma.yres - 1); - bottom = PIXADDR(lcd_dma.xres - 1, 0); - ei = PIXSTEP(0, 1, 0, 0); - fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1); - } else { - top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - bottom = PIXADDR(0, 0); - ei = PIXSTEP(0, 1, 0, 0); - fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1); - } - en = lcd_dma.yres; - fn = lcd_dma.xres; - break; - case 180: - if (!lcd_dma.mirror) { - top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - bottom = PIXADDR(0, 0); - ei = PIXSTEP(1, 0, 0, 0); - fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0); - } else { - top = PIXADDR(0, lcd_dma.yres - 1); - bottom = PIXADDR(lcd_dma.xres - 1, 0); - ei = PIXSTEP(0, 0, 1, 0); - fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0); - } - en = lcd_dma.xres; - fn = lcd_dma.yres; - break; - case 270: - if (!lcd_dma.mirror) { - top = PIXADDR(lcd_dma.xres - 1, 0); - bottom = PIXADDR(0, lcd_dma.yres - 1); - ei = PIXSTEP(0, 0, 0, 1); - fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0); - } else { - top = PIXADDR(0, 0); - bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - ei = PIXSTEP(0, 0, 0, 1); - fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0); - } - en = lcd_dma.yres; - fn = lcd_dma.xres; - break; - default: - BUG(); - return; /* Suppress warning about uninitialized vars */ - } - - if (cpu_is_omap15xx()) { - omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U); - omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L); - omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U); - omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L); - - return; - } - - /* 1610 regs */ - omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U); - omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L); - omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U); - omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L); - - omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1); - omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1); - - w = omap_readw(OMAP1610_DMA_LCD_CSDP); - w &= ~0x03; - w |= lcd_dma.data_type; - omap_writew(w, OMAP1610_DMA_LCD_CSDP); - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - /* Always set the source port as SDRAM for now*/ - w &= ~(0x03 << 6); - if (lcd_dma.callback != NULL) - w |= 1 << 1; /* Block interrupt enable */ - else - w &= ~(1 << 1); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - - if (!(lcd_dma.rotate || lcd_dma.mirror || - lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale)) - return; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - /* Set the double-indexed addressing mode */ - w |= (0x03 << 12); - omap_writew(w, OMAP1610_DMA_LCD_CCR); - - omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1); - omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U); - omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L); -} - -static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id) -{ - u16 w; - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - if (unlikely(!(w & (1 << 3)))) { - printk(KERN_WARNING "Spurious LCD DMA IRQ\n"); - return IRQ_NONE; - } - /* Ack the IRQ */ - w |= (1 << 3); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - lcd_dma.active = 0; - if (lcd_dma.callback != NULL) - lcd_dma.callback(w, lcd_dma.cb_data); - - return IRQ_HANDLED; -} - -int omap_request_lcd_dma(void (*callback)(u16 status, void *data), - void *data) -{ - spin_lock_irq(&lcd_dma.lock); - if (lcd_dma.reserved) { - spin_unlock_irq(&lcd_dma.lock); - printk(KERN_ERR "LCD DMA channel already reserved\n"); - BUG(); - return -EBUSY; - } - lcd_dma.reserved = 1; - spin_unlock_irq(&lcd_dma.lock); - lcd_dma.callback = callback; - lcd_dma.cb_data = data; - lcd_dma.active = 0; - lcd_dma.single_transfer = 0; - lcd_dma.rotate = 0; - lcd_dma.vxres = 0; - lcd_dma.mirror = 0; - lcd_dma.xscale = 0; - lcd_dma.yscale = 0; - lcd_dma.ext_ctrl = 0; - lcd_dma.src_port = 0; - - return 0; -} -EXPORT_SYMBOL(omap_request_lcd_dma); - -void omap_free_lcd_dma(void) -{ - spin_lock(&lcd_dma.lock); - if (!lcd_dma.reserved) { - spin_unlock(&lcd_dma.lock); - printk(KERN_ERR "LCD DMA is not reserved\n"); - BUG(); - return; - } - if (!cpu_is_omap15xx()) - omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, - OMAP1610_DMA_LCD_CCR); - lcd_dma.reserved = 0; - spin_unlock(&lcd_dma.lock); -} -EXPORT_SYMBOL(omap_free_lcd_dma); - -void omap_enable_lcd_dma(void) -{ - u16 w; - - /* - * Set the Enable bit only if an external controller is - * connected. Otherwise the OMAP internal controller will - * start the transfer when it gets enabled. - */ - if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl) - return; - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - w |= 1 << 8; - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - - lcd_dma.active = 1; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - w |= 1 << 7; - omap_writew(w, OMAP1610_DMA_LCD_CCR); -} -EXPORT_SYMBOL(omap_enable_lcd_dma); - -void omap_setup_lcd_dma(void) -{ - BUG_ON(lcd_dma.active); - if (!cpu_is_omap15xx()) { - /* Set some reasonable defaults */ - omap_writew(0x5440, OMAP1610_DMA_LCD_CCR); - omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP); - omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL); - } - set_b1_regs(); - if (!cpu_is_omap15xx()) { - u16 w; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - /* - * If DMA was already active set the end_prog bit to have - * the programmed register set loaded into the active - * register set. - */ - w |= 1 << 11; /* End_prog */ - if (!lcd_dma.single_transfer) - w |= (3 << 8); /* Auto_init, repeat */ - omap_writew(w, OMAP1610_DMA_LCD_CCR); - } -} -EXPORT_SYMBOL(omap_setup_lcd_dma); - -void omap_stop_lcd_dma(void) -{ - u16 w; - - lcd_dma.active = 0; - if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl) - return; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - w &= ~(1 << 7); - omap_writew(w, OMAP1610_DMA_LCD_CCR); - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - w &= ~(1 << 8); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); -} -EXPORT_SYMBOL(omap_stop_lcd_dma); - -static int __init omap_init_lcd_dma(void) -{ - int r; - - if (!cpu_class_is_omap1()) - return -ENODEV; - - if (cpu_is_omap16xx()) { - u16 w; - - /* this would prevent OMAP sleep */ - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - w &= ~(1 << 8); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - } - - spin_lock_init(&lcd_dma.lock); - - r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, - "LCD DMA", NULL); - if (r != 0) - pr_err("unable to request IRQ for LCD DMA (error %d)\n", r); - - return r; -} - -arch_initcall(omap_init_lcd_dma); - diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index f36c34f47f11..05c25c432449 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -15,14 +15,13 @@ #include <linux/io.h> #include <linux/platform_device.h> #include <linux/slab.h> - #include <linux/omap-dma.h> -#include <mach/mux.h> -#include "soc.h" +#include <linux/soc/ti/omap1-io.h> #include <linux/platform_data/asoc-ti-mcbsp.h> -#include <mach/irqs.h> - +#include "mux.h" +#include "soc.h" +#include "irqs.h" #include "iomap.h" #define DPS_RSTCT2_PER_EN (1 << 0) @@ -44,8 +43,8 @@ static void omap1_mcbsp_request(unsigned int id) api_clk = clk_get(NULL, "api_ck"); dsp_clk = clk_get(NULL, "dsp_ck"); if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) { - clk_enable(api_clk); - clk_enable(dsp_clk); + clk_prepare_enable(api_clk); + clk_prepare_enable(dsp_clk); /* * DSP external peripheral reset @@ -63,11 +62,11 @@ static void omap1_mcbsp_free(unsigned int id) if (id == 0 || id == 2) { if (--dsp_use == 0) { if (!IS_ERR(api_clk)) { - clk_disable(api_clk); + clk_disable_unprepare(api_clk); clk_put(api_clk); } if (!IS_ERR(dsp_clk)) { - clk_disable(dsp_clk); + clk_disable_unprepare(dsp_clk); clk_put(dsp_clk); } } diff --git a/arch/arm/mach-omap1/include/mach/mtd-xip.h b/arch/arm/mach-omap1/mtd-xip.h index d09b2bc4920f..b675d501b13d 100644 --- a/arch/arm/mach-omap1/include/mach/mtd-xip.h +++ b/arch/arm/mach-omap1/mtd-xip.h @@ -14,7 +14,8 @@ #ifndef __ARCH_OMAP_MTD_XIP_H__ #define __ARCH_OMAP_MTD_XIP_H__ -#include <mach/hardware.h> +#include "hardware.h" +#include <linux/soc/ti/omap1-io.h> #define OMAP_MPU_TIMER_BASE (0xfffec500) #define OMAP_MPU_TIMER_OFFSET 0x100 diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 972665bf52d6..2d9458ff1d29 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -12,10 +12,10 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/spinlock.h> +#include <linux/soc/ti/omap1-io.h> -#include <mach/hardware.h> - -#include <mach/mux.h> +#include "hardware.h" +#include "mux.h" #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap1/mux.h b/arch/arm/mach-omap1/mux.h new file mode 100644 index 000000000000..3e7ed3348a55 --- /dev/null +++ b/arch/arm/mach-omap1/mux.h @@ -0,0 +1,144 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Table of the Omap register configurations for the FUNC_MUX and + * PULL_DWN combinations. + * + * Copyright (C) 2004 - 2008 Texas Instruments Inc. + * Copyright (C) 2003 - 2008 Nokia Corporation + * + * Written by Tony Lindgren + * + * NOTE: Please use the following naming style for new pin entries. + * For example, W8_1610_MMC2_DAT0, where: + * - W8 = ball + * - 1610 = 1510 or 1610, none if common for both 1510 and 1610 + * - MMC2_DAT0 = function + */ + +#ifndef __ASM_ARCH_MUX_H +#define __ASM_ARCH_MUX_H + +#include <linux/soc/ti/omap1-mux.h> + +#define PU_PD_SEL_NA 0 /* No pu_pd reg available */ +#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */ + +#ifdef CONFIG_OMAP_MUX_DEBUG +#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \ + .mux_reg = FUNC_MUX_CTRL_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \ + .pull_reg = PULL_DWN_CTRL_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + +#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \ + .pu_pd_reg = PU_PD_SEL_##reg, \ + .pu_pd_val = status, + +#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \ + .mux_reg = OMAP7XX_IO_CONF_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG_7XX(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \ + .pull_reg = OMAP7XX_IO_CONF_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + +#else + +#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + +#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \ + .pu_pd_val = status, + +#define MUX_REG_7XX(reg, mode_offset, mode) \ + .mux_reg = OMAP7XX_IO_CONF_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG_7XX(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + +#endif /* CONFIG_OMAP_MUX_DEBUG */ + +#define MUX_CFG(desc, mux_reg, mode_offset, mode, \ + pull_reg, pull_bit, pull_status, \ + pu_pd_reg, pu_pd_status, debug_status) \ +{ \ + .name = desc, \ + .debug = debug_status, \ + MUX_REG(mux_reg, mode_offset, mode) \ + PULL_REG(pull_reg, pull_bit, pull_status) \ + PU_PD_REG(pu_pd_reg, pu_pd_status) \ +}, + + +/* + * OMAP730/850 has a slightly different config for the pin mux. + * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and + * not the FUNC_MUX_CTRL_x regs from hardware.h + * - for pull-up/down, only has one enable bit which is in the same register + * as mux config + */ +#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \ + pull_bit, pull_status, debug_status)\ +{ \ + .name = desc, \ + .debug = debug_status, \ + MUX_REG_7XX(mux_reg, mode_offset, mode) \ + PULL_REG_7XX(mux_reg, pull_bit, pull_status) \ + PU_PD_REG(NA, 0) \ +}, + +struct pin_config { + char *name; + const unsigned int mux_reg; + unsigned char debug; + + const unsigned char mask_offset; + const unsigned char mask; + + const char *pull_name; + const unsigned int pull_reg; + const unsigned char pull_val; + const unsigned char pull_bit; + + const char *pu_pd_name; + const unsigned int pu_pd_reg; + const unsigned char pu_pd_val; + +#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) + const char *mux_reg_name; +#endif + +}; + +struct omap_mux_cfg { + struct pin_config *pins; + unsigned long size; + int (*cfg_reg)(const struct pin_config *cfg); +}; + +#ifdef CONFIG_OMAP_MUX +/* setup pin muxing in Linux */ +extern int omap1_mux_init(void); +extern int omap_mux_register(struct omap_mux_cfg *); +#else +/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ +static inline int omap1_mux_init(void) { return 0; } +#endif + +extern int omap2_mux_init(void); + +#endif diff --git a/arch/arm/mach-omap1/ocpi.c b/arch/arm/mach-omap1/ocpi.c index 380ea2de58c1..d48f726571a4 100644 --- a/arch/arm/mach-omap1/ocpi.c +++ b/arch/arm/mach-omap1/ocpi.c @@ -20,9 +20,9 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/soc/ti/omap1-io.h> -#include <mach/hardware.h> - +#include "hardware.h" #include "common.h" #define OCPI_BASE 0xfffec320 @@ -73,7 +73,7 @@ static int __init omap_ocpi_init(void) if (IS_ERR(ocpi_ck)) return PTR_ERR(ocpi_ck); - clk_enable(ocpi_ck); + clk_prepare_enable(ocpi_ck); ocpi_enable(); pr_info("OMAP OCPI interconnect driver loaded\n"); @@ -87,7 +87,7 @@ static void __exit omap_ocpi_exit(void) if (!cpu_is_omap16xx()) return; - clk_disable(ocpi_ck); + clk_disable_unprepare(ocpi_ck); clk_put(ocpi_ck); } diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/mach-omap1/omap-dma.c index 9f11de46aaa9..f7e62de427f3 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/mach-omap1/omap-dma.c @@ -34,9 +34,10 @@ #include <linux/omap-dma.h> -#ifdef CONFIG_ARCH_OMAP1 -#include <mach/soc.h> -#endif +#include <linux/soc/ti/omap1-io.h> +#include <linux/soc/ti/omap1-soc.h> + +#include "tc.h" /* * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA @@ -49,22 +50,12 @@ #undef DEBUG -#ifndef CONFIG_ARCH_OMAP1 -enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED, - DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED -}; - -enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED }; -#endif - #define OMAP_DMA_ACTIVE 0x01 -#define OMAP2_DMA_CSR_CLEAR_MASK 0xffffffff #define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec) static struct omap_system_dma_plat_info *p; static struct omap_dma_dev_attr *d; -static void omap_clear_dma(int lch); static int enable_1510_mode; static u32 errata; @@ -88,21 +79,14 @@ static int omap_dma_reserve_channels; static DEFINE_SPINLOCK(dma_chan_lock); static struct omap_dma_lch *dma_chan; -static inline void disable_lnk(int lch); -static void omap_disable_channel_irq(int lch); -static inline void omap_enable_channel_irq(int lch); - -#ifdef CONFIG_ARCH_OMAP15XX -/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */ -static int omap_dma_in_1510_mode(void) +static inline void omap_disable_channel_irq(int lch) { - return enable_1510_mode; + /* disable channel interrupts */ + p->dma_write(0, CICR, lch); + /* Clear CSR */ + p->dma_read(CSR, lch); } -#else -#define omap_dma_in_1510_mode() 0 -#endif -#ifdef CONFIG_ARCH_OMAP1 static inline void set_gdma_dev(int req, int dev) { u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4; @@ -114,13 +98,8 @@ static inline void set_gdma_dev(int req, int dev) l |= (dev - 1) << shift; omap_writel(l, reg); } -#else -#define set_gdma_dev(req, dev) do {} while (0) -#define omap_readl(reg) 0 -#define omap_writel(val, reg) do {} while (0) -#endif -#ifdef CONFIG_ARCH_OMAP1 +#if IS_ENABLED(CONFIG_FB_OMAP) void omap_set_dma_priority(int lch, int dst_port, int priority) { unsigned long reg; @@ -150,81 +129,43 @@ void omap_set_dma_priority(int lch, int dst_port, int priority) omap_writel(l, reg); } } +EXPORT_SYMBOL(omap_set_dma_priority); #endif -#ifdef CONFIG_ARCH_OMAP2PLUS -void omap_set_dma_priority(int lch, int dst_port, int priority) +#if IS_ENABLED(CONFIG_USB_OMAP) +#ifdef CONFIG_ARCH_OMAP15XX +/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */ +static int omap_dma_in_1510_mode(void) { - u32 ccr; - - ccr = p->dma_read(CCR, lch); - if (priority) - ccr |= (1 << 6); - else - ccr &= ~(1 << 6); - p->dma_write(ccr, CCR, lch); + return enable_1510_mode; } +#else +#define omap_dma_in_1510_mode() 0 #endif -EXPORT_SYMBOL(omap_set_dma_priority); void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, int frame_count, int sync_mode, int dma_trigger, int src_or_dst_synch) { u32 l; + u16 ccr; l = p->dma_read(CSDP, lch); l &= ~0x03; l |= data_type; p->dma_write(l, CSDP, lch); - if (dma_omap1()) { - u16 ccr; - - ccr = p->dma_read(CCR, lch); - ccr &= ~(1 << 5); - if (sync_mode == OMAP_DMA_SYNC_FRAME) - ccr |= 1 << 5; - p->dma_write(ccr, CCR, lch); - - ccr = p->dma_read(CCR2, lch); - ccr &= ~(1 << 2); - if (sync_mode == OMAP_DMA_SYNC_BLOCK) - ccr |= 1 << 2; - p->dma_write(ccr, CCR2, lch); - } - - if (dma_omap2plus() && dma_trigger) { - u32 val; - - val = p->dma_read(CCR, lch); - - /* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */ - val &= ~((1 << 23) | (3 << 19) | 0x1f); - val |= (dma_trigger & ~0x1f) << 14; - val |= dma_trigger & 0x1f; - - if (sync_mode & OMAP_DMA_SYNC_FRAME) - val |= 1 << 5; - else - val &= ~(1 << 5); - - if (sync_mode & OMAP_DMA_SYNC_BLOCK) - val |= 1 << 18; - else - val &= ~(1 << 18); - - if (src_or_dst_synch == OMAP_DMA_DST_SYNC_PREFETCH) { - val &= ~(1 << 24); /* dest synch */ - val |= (1 << 23); /* Prefetch */ - } else if (src_or_dst_synch) { - val |= 1 << 24; /* source synch */ - } else { - val &= ~(1 << 24); /* dest synch */ - } - p->dma_write(val, CCR, lch); - } + ccr = p->dma_read(CCR, lch); + ccr &= ~(1 << 5); + if (sync_mode == OMAP_DMA_SYNC_FRAME) + ccr |= 1 << 5; + p->dma_write(ccr, CCR, lch); + ccr = p->dma_read(CCR2, lch); + ccr &= ~(1 << 2); + if (sync_mode == OMAP_DMA_SYNC_BLOCK) + ccr |= 1 << 2; + p->dma_write(ccr, CCR2, lch); p->dma_write(elem_count, CEN, lch); p->dma_write(frame_count, CFN, lch); } @@ -232,7 +173,7 @@ EXPORT_SYMBOL(omap_set_dma_transfer_params); void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode) { - if (dma_omap1() && !dma_omap15xx()) { + if (!dma_omap15xx()) { u32 l; l = p->dma_read(LCH_CTRL, lch); @@ -249,15 +190,12 @@ void omap_set_dma_src_params(int lch, int src_port, int src_amode, int src_ei, int src_fi) { u32 l; + u16 w; - if (dma_omap1()) { - u16 w; - - w = p->dma_read(CSDP, lch); - w &= ~(0x1f << 2); - w |= src_port << 2; - p->dma_write(w, CSDP, lch); - } + w = p->dma_read(CSDP, lch); + w &= ~(0x1f << 2); + w |= src_port << 2; + p->dma_write(w, CSDP, lch); l = p->dma_read(CCR, lch); l &= ~(0x03 << 12); @@ -295,26 +233,15 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - if (dma_omap2plus()) - burst = 0x1; - else - burst = 0x2; + burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - if (dma_omap2plus()) { - burst = 0x2; - break; - } /* * not supported by current hardware on OMAP1 * w |= (0x03 << 7); */ fallthrough; case OMAP_DMA_DATA_BURST_16: - if (dma_omap2plus()) { - burst = 0x3; - break; - } /* OMAP1 don't support burst 16 */ fallthrough; default: @@ -333,12 +260,10 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, { u32 l; - if (dma_omap1()) { - l = p->dma_read(CSDP, lch); - l &= ~(0x1f << 9); - l |= dest_port << 9; - p->dma_write(l, CSDP, lch); - } + l = p->dma_read(CSDP, lch); + l &= ~(0x1f << 9); + l |= dest_port << 9; + p->dma_write(l, CSDP, lch); l = p->dma_read(CCR, lch); l &= ~(0x03 << 14); @@ -376,22 +301,12 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - if (dma_omap2plus()) - burst = 0x1; - else - burst = 0x2; + burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - if (dma_omap2plus()) - burst = 0x2; - else - burst = 0x3; + burst = 0x3; break; case OMAP_DMA_DATA_BURST_16: - if (dma_omap2plus()) { - burst = 0x3; - break; - } /* OMAP1 don't support burst 16 */ fallthrough; default: @@ -407,26 +322,12 @@ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode); static inline void omap_enable_channel_irq(int lch) { /* Clear CSR */ - if (dma_omap1()) - p->dma_read(CSR, lch); - else - p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); + p->dma_read(CSR, lch); /* Enable some nice interrupts. */ p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch); } -static inline void omap_disable_channel_irq(int lch) -{ - /* disable channel interrupts */ - p->dma_write(0, CICR, lch); - /* Clear CSR */ - if (dma_omap1()) - p->dma_read(CSR, lch); - else - p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); -} - void omap_disable_dma_irq(int lch, u16 bits) { dma_chan[lch].enabled_irqs &= ~bits; @@ -439,8 +340,7 @@ static inline void enable_lnk(int lch) l = p->dma_read(CLNK_CTRL, lch); - if (dma_omap1()) - l &= ~(1 << 14); + l &= ~(1 << 14); /* Set the ENABLE_LNK bits */ if (dma_chan[lch].next_lch != -1) @@ -458,19 +358,13 @@ static inline void disable_lnk(int lch) /* Disable interrupts */ omap_disable_channel_irq(lch); - if (dma_omap1()) { - /* Set the STOP_LNK bit */ - l |= 1 << 14; - } - - if (dma_omap2plus()) { - /* Clear the ENABLE_LNK bit */ - l &= ~(1 << 15); - } + /* Set the STOP_LNK bit */ + l |= 1 << 14; p->dma_write(l, CLNK_CTRL, lch); dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE; } +#endif int omap_request_dma(int dev_id, const char *dev_name, void (*callback)(int lch, u16 ch_status, void *data), @@ -509,8 +403,7 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ; - if (dma_omap1()) - chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ; + chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ; if (dma_omap16xx()) { /* If the sync device is set, configure it dynamically. */ @@ -523,7 +416,7 @@ int omap_request_dma(int dev_id, const char *dev_name, * id. */ p->dma_write(dev_id | (1 << 10), CCR, free_ch); - } else if (dma_omap1()) { + } else { p->dma_write(dev_id, CCR, free_ch); } @@ -570,6 +463,7 @@ static void omap_clear_dma(int lch) local_irq_restore(flags); } +#if IS_ENABLED(CONFIG_USB_OMAP) void omap_start_dma(int lch) { u32 l; @@ -739,8 +633,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) offset = p->dma_read(CSSA, lch); } - if (dma_omap1()) - offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000); + offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000); return offset; } @@ -778,8 +671,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) offset = p->dma_read(CDSA, lch); } - if (dma_omap1()) - offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000); + offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000); return offset; } @@ -790,14 +682,14 @@ int omap_get_dma_active_status(int lch) return (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN) != 0; } EXPORT_SYMBOL(omap_get_dma_active_status); +#endif int omap_dma_running(void) { int lch; - if (dma_omap1()) - if (omap_lcd_dma_running()) - return 1; + if (omap_lcd_dma_running()) + return 1; for (lch = 0; lch < dma_chan_count; lch++) if (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN) @@ -808,8 +700,6 @@ int omap_dma_running(void) /*----------------------------------------------------------------------------*/ -#ifdef CONFIG_ARCH_OMAP1 - static int omap1_dma_handle_ch(int ch) { u32 csr; @@ -862,10 +752,6 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id) return handled ? IRQ_HANDLED : IRQ_NONE; } -#else -#define omap1_dma_irq_handler NULL -#endif - struct omap_system_dma_plat_info *omap_get_plat_info(void) { return p; @@ -911,29 +797,27 @@ static int omap_system_dma_probe(struct platform_device *pdev) if (ch >= 6 && enable_1510_mode) continue; - if (dma_omap1()) { - /* - * request_irq() doesn't like dev_id (ie. ch) being - * zero, so we have to kludge around this. - */ - sprintf(&irq_name[0], "%d", ch); - dma_irq = platform_get_irq_byname(pdev, irq_name); - - if (dma_irq < 0) { - ret = dma_irq; - goto exit_dma_irq_fail; - } - - /* INT_DMA_LCD is handled in lcd_dma.c */ - if (dma_irq == INT_DMA_LCD) - continue; - - ret = request_irq(dma_irq, - omap1_dma_irq_handler, 0, "DMA", - (void *) (ch + 1)); - if (ret != 0) - goto exit_dma_irq_fail; + /* + * request_irq() doesn't like dev_id (ie. ch) being + * zero, so we have to kludge around this. + */ + sprintf(&irq_name[0], "%d", ch); + dma_irq = platform_get_irq_byname(pdev, irq_name); + + if (dma_irq < 0) { + ret = dma_irq; + goto exit_dma_irq_fail; } + + /* INT_DMA_LCD is handled in lcd_dma.c */ + if (dma_irq == INT_DMA_LCD) + continue; + + ret = request_irq(dma_irq, + omap1_dma_irq_handler, 0, "DMA", + (void *) (ch + 1)); + if (ret != 0) + goto exit_dma_irq_fail; } /* reserve dma channels 0 and 1 in high security devices on 34xx */ @@ -953,9 +837,6 @@ static int omap_system_dma_remove(struct platform_device *pdev) { int dma_irq, irq_rel = 0; - if (dma_omap2plus()) - return 0; - for ( ; irq_rel < dma_chan_count; irq_rel++) { dma_irq = platform_get_irq(pdev, irq_rel); free_irq(dma_irq, (void *)(irq_rel + 1)); diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/omap1510.h index 3d235244bf5c..3d235244bf5c 100644 --- a/arch/arm/mach-omap1/include/mach/omap1510.h +++ b/arch/arm/mach-omap1/omap1510.h diff --git a/arch/arm/mach-omap1/include/mach/omap16xx.h b/arch/arm/mach-omap1/omap16xx.h index cd1c724869c7..cd1c724869c7 100644 --- a/arch/arm/mach-omap1/include/mach/omap16xx.h +++ b/arch/arm/mach-omap1/omap16xx.h diff --git a/arch/arm/mach-omap1/include/mach/omap7xx.h b/arch/arm/mach-omap1/omap7xx.h index 63da994bc609..63da994bc609 100644 --- a/arch/arm/mach-omap1/include/mach/omap7xx.h +++ b/arch/arm/mach-omap1/omap7xx.h diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index a745d64d4699..fce7d2b572bf 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -52,13 +52,14 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> -#include <mach/tc.h> -#include <mach/mux.h> +#include <linux/soc/ti/omap1-io.h> +#include "tc.h" #include <linux/omap-dma.h> #include <clocksource/timer-ti-dm.h> -#include <mach/irqs.h> - +#include "hardware.h" +#include "mux.h" +#include "irqs.h" #include "iomap.h" #include "clock.h" #include "pm.h" diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h index cd926dcb5e7f..d9165709c532 100644 --- a/arch/arm/mach-omap1/pm.h +++ b/arch/arm/mach-omap1/pm.h @@ -34,6 +34,8 @@ #ifndef __ARCH_ARM_MACH_OMAP1_PM_H #define __ARCH_ARM_MACH_OMAP1_PM_H +#include <linux/soc/ti/omap1-io.h> + /* * ---------------------------------------------------------------------------- * Register and offset definitions to be used in PM assembler code diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c index af2c120b0c4e..2eee6a6965ff 100644 --- a/arch/arm/mach-omap1/reset.c +++ b/arch/arm/mach-omap1/reset.c @@ -6,8 +6,7 @@ #include <linux/io.h> #include <linux/reboot.h> -#include <mach/hardware.h> - +#include "hardware.h" #include "iomap.h" #include "common.h" diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 9eb591fbfd89..88928fc33b2e 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -19,8 +19,8 @@ #include <asm/mach-types.h> -#include <mach/mux.h> - +#include "serial.h" +#include "mux.h" #include "pm.h" #include "soc.h" @@ -141,7 +141,7 @@ void __init omap_serial_init(void) if (IS_ERR(uart1_ck)) printk("Could not get uart1_ck\n"); else { - clk_enable(uart1_ck); + clk_prepare_enable(uart1_ck); if (cpu_is_omap15xx()) clk_set_rate(uart1_ck, 12000000); } @@ -151,7 +151,7 @@ void __init omap_serial_init(void) if (IS_ERR(uart2_ck)) printk("Could not get uart2_ck\n"); else { - clk_enable(uart2_ck); + clk_prepare_enable(uart2_ck); if (cpu_is_omap15xx()) clk_set_rate(uart2_ck, 12000000); else @@ -163,7 +163,7 @@ void __init omap_serial_init(void) if (IS_ERR(uart3_ck)) printk("Could not get uart3_ck\n"); else { - clk_enable(uart3_ck); + clk_prepare_enable(uart3_ck); if (cpu_is_omap15xx()) clk_set_rate(uart3_ck, 12000000); } diff --git a/arch/arm/mach-omap1/include/mach/serial.h b/arch/arm/mach-omap1/serial.h index 4700e384c3d9..4700e384c3d9 100644 --- a/arch/arm/mach-omap1/include/mach/serial.h +++ b/arch/arm/mach-omap1/serial.h diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index a908c51839a4..f111b79512ce 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -36,7 +36,7 @@ #include <asm/assembler.h> -#include <mach/hardware.h> +#include "hardware.h" #include "iomap.h" #include "pm.h" diff --git a/arch/arm/mach-omap1/soc.h b/arch/arm/mach-omap1/soc.h index 69daf0187b1d..5fb57fdd9c2b 100644 --- a/arch/arm/mach-omap1/soc.h +++ b/arch/arm/mach-omap1/soc.h @@ -1,4 +1,6 @@ /* - * We can move mach/soc.h here once the drivers are fixed + * We can move linux/soc/ti/omap1-soc.h here once the drivers are fixed */ -#include <mach/soc.h> +#include "hardware.h" +#include "irqs.h" +#include <asm/irq.h> diff --git a/arch/arm/mach-omap1/sram-init.c b/arch/arm/mach-omap1/sram-init.c index 3bd60708c345..27c42e2a21cc 100644 --- a/arch/arm/mach-omap1/sram-init.c +++ b/arch/arm/mach-omap1/sram-init.c @@ -14,6 +14,7 @@ #include <asm/fncpy.h> #include <asm/tlb.h> #include <asm/cacheflush.h> +#include <asm/set_memory.h> #include <asm/mach/map.h> @@ -22,18 +23,77 @@ #define OMAP1_SRAM_PA 0x20000000 #define SRAM_BOOTLOADER_SZ 0x80 +#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) + +static void __iomem *omap_sram_base; +static unsigned long omap_sram_start; +static unsigned long omap_sram_skip; +static unsigned long omap_sram_size; +static void __iomem *omap_sram_ceil; + +/* + * Memory allocator for SRAM: calculates the new ceiling address + * for pushing a function using the fncpy API. + * + * Note that fncpy requires the returned address to be aligned + * to an 8-byte boundary. + */ +static void *omap_sram_push_address(unsigned long size) +{ + unsigned long available, new_ceil = (unsigned long)omap_sram_ceil; + + available = omap_sram_ceil - (omap_sram_base + omap_sram_skip); + + if (size > available) { + pr_err("Not enough space in SRAM\n"); + return NULL; + } + + new_ceil -= size; + new_ceil = ROUND_DOWN(new_ceil, FNCPY_ALIGN); + omap_sram_ceil = IOMEM(new_ceil); + + return (void __force *)omap_sram_ceil; +} + +void *omap_sram_push(void *funcp, unsigned long size) +{ + void *sram; + unsigned long base; + int pages; + void *dst = NULL; + + sram = omap_sram_push_address(size); + if (!sram) + return NULL; + + base = (unsigned long)sram & PAGE_MASK; + pages = PAGE_ALIGN(size) / PAGE_SIZE; + + set_memory_rw(base, pages); + + dst = fncpy(sram, funcp, size); + + set_memory_ro(base, pages); + set_memory_x(base, pages); + + return dst; +} /* * The amount of SRAM depends on the core type. * Note that we cannot try to test for SRAM here because writes * to secure SRAM will hang the system. Also the SRAM is not * yet mapped at this point. + * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. */ static void __init omap_detect_and_map_sram(void) { - unsigned long omap_sram_skip = SRAM_BOOTLOADER_SZ; - unsigned long omap_sram_start = OMAP1_SRAM_PA; - unsigned long omap_sram_size; + unsigned long base; + int pages; + + omap_sram_skip = SRAM_BOOTLOADER_SZ; + omap_sram_start = OMAP1_SRAM_PA; if (cpu_is_omap7xx()) omap_sram_size = 0x32000; /* 200K */ @@ -47,8 +107,27 @@ static void __init omap_detect_and_map_sram(void) omap_sram_size = 0x4000; } - omap_map_sram(omap_sram_start, omap_sram_size, - omap_sram_skip, 1); + omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE); + omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, 1); + if (!omap_sram_base) { + pr_err("SRAM: Could not map\n"); + return; + } + + omap_sram_ceil = omap_sram_base + omap_sram_size; + + /* + * Looks like we need to preserve some bootloader code at the + * beginning of SRAM for jumping to flash for reboot to work... + */ + memset_io(omap_sram_base + omap_sram_skip, 0, + omap_sram_size - omap_sram_skip); + + base = (unsigned long)omap_sram_base; + pages = PAGE_ALIGN(omap_sram_size) / PAGE_SIZE; + + set_memory_ro(base, pages); + set_memory_x(base, pages); } static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); @@ -62,7 +141,7 @@ void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) _omap_sram_reprogram_clock(dpllctl, ckctl); } -int __init omap_sram_init(void) +int __init omap1_sram_init(void) { omap_detect_and_map_sram(); _omap_sram_reprogram_clock = diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S index 37f34fcd65fb..89f4dc1b70f0 100644 --- a/arch/arm/mach-omap1/sram.S +++ b/arch/arm/mach-omap1/sram.S @@ -6,11 +6,11 @@ */ #include <linux/linkage.h> +#include <linux/soc/ti/omap1-io.h> #include <asm/assembler.h> -#include <mach/hardware.h> - +#include "hardware.h" #include "iomap.h" .text diff --git a/arch/arm/mach-omap1/sram.h b/arch/arm/mach-omap1/sram.h index 73efabd119e8..f45e6dd6d7e5 100644 --- a/arch/arm/mach-omap1/sram.h +++ b/arch/arm/mach-omap1/sram.h @@ -1,8 +1,10 @@ /* SPDX-License-Identifier: GPL-2.0 */ -#include <plat/sram.h> extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); +int omap1_sram_init(void); +void *omap_sram_push(void *funcp, unsigned long size); + /* Do not use these */ extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); extern unsigned long omap1_sram_reprogram_clock_sz; diff --git a/arch/arm/mach-omap1/include/mach/tc.h b/arch/arm/mach-omap1/tc.h index adaab6a0bd08..243454bc0684 100644 --- a/arch/arm/mach-omap1/include/mach/tc.h +++ b/arch/arm/mach-omap1/tc.h @@ -1,7 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0-or-later */ /* - * arch/arm/plat-omap/include/mach/tc.h - * * OMAP Traffic Controller * * Copyright (C) 2004 Nokia Corporation diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index de590a85a42b..d5e127851dc7 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -47,12 +47,14 @@ #include <asm/irq.h> -#include <mach/hardware.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> +#include "hardware.h" +#include "mux.h" #include "iomap.h" #include "common.h" +#include "clock.h" #ifdef CONFIG_OMAP_MPU_TIMER @@ -224,6 +226,9 @@ static inline void omap_mpu_timer_init(void) */ void __init omap1_timer_init(void) { + omap1_clk_init(); + omap1_mux_init(); + if (omap_32k_timer_init() != 0) omap_mpu_timer_init(); } diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index 0411d5508d63..9ed64345f06e 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -26,6 +26,7 @@ #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/platform_data/dmtimer-omap.h> +#include <linux/soc/ti/omap1-io.h> #include <clocksource/timer-ti-dm.h> diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 780fdf03c3ce..410d17d1d443 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -45,15 +45,13 @@ #include <linux/clocksource.h> #include <linux/clockchips.h> #include <linux/io.h> +#include <linux/sched_clock.h> #include <asm/irq.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> -#include <plat/counter-32k.h> - -#include <mach/hardware.h> - +#include "hardware.h" #include "common.h" /* @@ -159,6 +157,98 @@ static __init void omap_init_32k_timer(void) OMAP_32K_TICKS_PER_SEC, 1, 0xfffffffe); } +/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ +#define OMAP2_32KSYNCNT_REV_OFF 0x0 +#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30) +#define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10 +#define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30 + +/* + * 32KHz clocksource ... always available, on pretty most chips except + * OMAP 730 and 1510. Other timers could be used as clocksources, with + * higher resolution in free-running counter modes (e.g. 12 MHz xtal), + * but systems won't necessarily want to spend resources that way. + */ +static void __iomem *sync32k_cnt_reg; + +static u64 notrace omap_32k_read_sched_clock(void) +{ + return sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0; +} + +/** + * omap_read_persistent_clock64 - Return time from a persistent clock. + * + * Reads the time from a source which isn't disabled during PM, the + * 32k sync timer. Convert the cycles elapsed since last read into + * nsecs and adds to a monotonically increasing timespec64. + */ +static struct timespec64 persistent_ts; +static cycles_t cycles; +static unsigned int persistent_mult, persistent_shift; + +static void omap_read_persistent_clock64(struct timespec64 *ts) +{ + unsigned long long nsecs; + cycles_t last_cycles; + + last_cycles = cycles; + cycles = sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0; + + nsecs = clocksource_cyc2ns(cycles - last_cycles, + persistent_mult, persistent_shift); + + timespec64_add_ns(&persistent_ts, nsecs); + + *ts = persistent_ts; +} + +/** + * omap_init_clocksource_32k - setup and register counter 32k as a + * kernel clocksource + * @pbase: base addr of counter_32k module + * @size: size of counter_32k to map + * + * Returns 0 upon success or negative error code upon failure. + * + */ +static int __init omap_init_clocksource_32k(void __iomem *vbase) +{ + int ret; + + /* + * 32k sync Counter IP register offsets vary between the + * highlander version and the legacy ones. + * The 'SCHEME' bits(30-31) of the revision register is used + * to identify the version. + */ + if (readl_relaxed(vbase + OMAP2_32KSYNCNT_REV_OFF) & + OMAP2_32KSYNCNT_REV_SCHEME) + sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH; + else + sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_LOW; + + /* + * 120000 rough estimate from the calculations in + * __clocksource_update_freq_scale. + */ + clocks_calc_mult_shift(&persistent_mult, &persistent_shift, + 32768, NSEC_PER_SEC, 120000); + + ret = clocksource_mmio_init(sync32k_cnt_reg, "32k_counter", 32768, + 250, 32, clocksource_mmio_readl_up); + if (ret) { + pr_err("32k_counter: can't register clocksource\n"); + return ret; + } + + sched_clock_register(omap_32k_read_sched_clock, 32, 32768); + register_persistent_clock(omap_read_persistent_clock64); + pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n"); + + return 0; +} + /* * --------------------------------------------------------------------------- * Timer initialization @@ -180,7 +270,7 @@ int __init omap_32k_timer_init(void) sync32k_ick = clk_get(NULL, "omap_32ksync_ick"); if (!IS_ERR(sync32k_ick)) - clk_enable(sync32k_ick); + clk_prepare_enable(sync32k_ick); ret = omap_init_clocksource_32k(base); } diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index e60831c82b78..0119f3ddb7a6 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -12,13 +12,13 @@ #include <linux/dma-map-ops.h> #include <linux/io.h> #include <linux/delay.h> +#include <linux/soc/ti/omap1-io.h> #include <asm/irq.h> -#include <mach/mux.h> - -#include <mach/usb.h> - +#include "hardware.h" +#include "mux.h" +#include "usb.h" #include "common.h" /* These routines should handle the standard chip-specific modes diff --git a/arch/arm/mach-omap1/usb.h b/arch/arm/mach-omap1/usb.h new file mode 100644 index 000000000000..08c9344c46e3 --- /dev/null +++ b/arch/arm/mach-omap1/usb.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * fixme correct answer depends on hmc_mode, + * as does (on omap1) any nonzero value for config->otg port number + */ +#include <linux/platform_data/usb-omap1.h> +#include <linux/soc/ti/omap1-usb.h> + +#if IS_ENABLED(CONFIG_USB_OMAP) +#define is_usb0_device(config) 1 +#else +#define is_usb0_device(config) 0 +#endif + +#if IS_ENABLED(CONFIG_USB_SUPPORT) +void omap1_usb_init(struct omap_usb_config *pdata); +#else +static inline void omap1_usb_init(struct omap_usb_config *pdata) +{ +} +#endif + +#define OMAP1_OHCI_BASE 0xfffba000 +#define OMAP2_OHCI_BASE 0x4805e000 +#define OMAP_OHCI_BASE OMAP1_OHCI_BASE diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 02c253de9b6e..a8adbb4d478a 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -123,6 +123,8 @@ config OMAP_INTERCONNECT_BARRIER bool select ARM_HEAVY_MB +config ARCH_OMAP + bool if ARCH_OMAP2PLUS @@ -153,6 +155,53 @@ config SOC_HAS_REALTIME_COUNTER depends on SOC_OMAP5 || SOC_DRA7XX default y +config POWER_AVS_OMAP + bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2" + depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM + select POWER_SUPPLY + help + Say Y to enable AVS(Adaptive Voltage Scaling) + support on OMAP containing the version 1 or + version 2 of the SmartReflex IP. + V1 is the 65nm version used in OMAP3430. + V2 is the update for the 45nm version of the IP used in OMAP3630 + and OMAP4430 + + Please note, that by default SmartReflex is only + initialized and not enabled. To enable the automatic voltage + compensation for vdd mpu and vdd core from user space, + user must write 1 to + /debug/smartreflex/sr_<X>/autocomp, + where X is mpu_iva or core for OMAP3. + Optionally autocompensation can be enabled in the kernel + by default during system init via the enable_on_init flag + which an be passed as platform data to the smartreflex driver. + +config POWER_AVS_OMAP_CLASS3 + bool "Class 3 mode of Smartreflex Implementation" + depends on POWER_AVS_OMAP && TWL4030_CORE + help + Say Y to enable Class 3 implementation of Smartreflex + + Class 3 implementation of Smartreflex employs continuous hardware + voltage calibration. + +config OMAP3_L2_AUX_SECURE_SAVE_RESTORE + bool "OMAP3 HS/EMU save and restore for L2 AUX control register" + depends on ARCH_OMAP3 && PM + help + Without this option, L2 Auxiliary control register contents are + lost during off-mode entry on HS/EMU devices. This feature + requires support from PPA / boot-loader in HS/EMU devices, which + currently does not exist by default. + +config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID + int "Service ID for the support routine to set L2 AUX control" + depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE + default 43 + help + PPA routine service ID for setting L2 auxiliary control register. + comment "OMAP Core Type" depends on ARCH_OMAP2 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 8306ad686bc8..2feb9f6630af 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -3,9 +3,6 @@ # Makefile for the linux kernel. # -ccflags-y := -I$(srctree)/$(src)/include \ - -I$(srctree)/arch/arm/plat-omap/include - # Common support obj-y := id.o io.o control.o devices.o fb.o pm.o \ common.o dma.o omap-headsmp.o sram.o diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c index e2d069fe67f1..87f2c2d2d754 100644 --- a/arch/arm/mach-omap2/cm_common.c +++ b/arch/arm/mach-omap2/cm_common.c @@ -320,8 +320,10 @@ int __init omap2_cm_base_init(void) data = (struct omap_prcm_init_data *)match->data; ret = of_address_to_resource(np, 0, &res); - if (ret) + if (ret) { + of_node_put(np); return ret; + } if (data->index == TI_CLKM_CM) mem = &cm_base; @@ -367,8 +369,10 @@ int __init omap_cm_init(void) continue; ret = omap2_clk_provider_init(np, data->index, NULL, data->mem); - if (ret) + if (ret) { + of_node_put(np); return ret; + } } return 0; diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 32f58f58515e..bd5981945239 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -266,7 +266,7 @@ extern void omap4_sar_ram_init(void); extern void __iomem *omap4_get_sar_ram_base(void); extern void omap4_mpuss_early_init(void); extern void omap_do_wfi(void); - +extern void omap_interconnect_sync(void); #ifdef CONFIG_SMP /* Needed for secondary core boot */ @@ -360,5 +360,16 @@ extern int omap_dss_reset(struct omap_hwmod *); /* SoC specific clock initializer */ int omap_clk_init(void); +#if IS_ENABLED(CONFIG_OMAP_IOMMU) +int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request, + u8 *pwrst); +#else +static inline int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, + bool request, u8 *pwrst) +{ + return 0; +} +#endif + #endif /* __ASSEMBLER__ */ #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 062d431fc33a..c514a9602269 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -769,8 +769,10 @@ int __init omap2_control_base_init(void) data = (struct control_init_data *)match->data; mem = of_iomap(np, 0); - if (!mem) + if (!mem) { + of_node_put(np); return -ENOMEM; + } if (data->index == TI_CLKM_CTRL) { omap2_ctrl_base = mem; @@ -810,22 +812,24 @@ int __init omap_control_init(void) if (scm_conf) { syscon = syscon_node_to_regmap(scm_conf); - if (IS_ERR(syscon)) - return PTR_ERR(syscon); + if (IS_ERR(syscon)) { + ret = PTR_ERR(syscon); + goto of_node_put; + } if (of_get_child_by_name(scm_conf, "clocks")) { ret = omap2_clk_provider_init(scm_conf, data->index, syscon, NULL); if (ret) - return ret; + goto of_node_put; } } else { /* No scm_conf found, direct access */ ret = omap2_clk_provider_init(np, data->index, NULL, data->mem); if (ret) - return ret; + goto of_node_put; } } @@ -836,6 +840,11 @@ int __init omap_control_init(void) } return 0; + +of_node_put: + of_node_put(np); + return ret; + } /** diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index dfc9b21ff19b..830cd4e7eb44 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -30,6 +30,7 @@ #include <linux/omap-dma.h> #include "soc.h" +#include "common.h" static const struct omap_dma_reg reg_map[] = { [REVISION] = { 0x0000, 0x00, OMAP_DMA_REG_32BIT }, diff --git a/arch/arm/mach-omap2/include/mach/hardware.h b/arch/arm/mach-omap2/include/mach/hardware.h deleted file mode 100644 index 54492dbf6973..000000000000 --- a/arch/arm/mach-omap2/include/mach/hardware.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/hardware.h - */ diff --git a/arch/arm/mach-omap2/include/mach/irqs.h b/arch/arm/mach-omap2/include/mach/irqs.h deleted file mode 100644 index ba5282cafa42..000000000000 --- a/arch/arm/mach-omap2/include/mach/irqs.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/irqs.h - */ diff --git a/arch/arm/mach-omap2/include/mach/serial.h b/arch/arm/mach-omap2/include/mach/serial.h deleted file mode 100644 index 7ca1fcff453b..000000000000 --- a/arch/arm/mach-omap2/include/mach/serial.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* OMAP2 serial ports */ -#define OMAP2_UART1_BASE 0x4806a000 -#define OMAP2_UART2_BASE 0x4806c000 -#define OMAP2_UART3_BASE 0x4806e000 - -/* OMAP3 serial ports */ -#define OMAP3_UART1_BASE OMAP2_UART1_BASE -#define OMAP3_UART2_BASE OMAP2_UART2_BASE -#define OMAP3_UART3_BASE 0x49020000 -#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */ -#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */ - -/* OMAP4 serial ports */ -#define OMAP4_UART1_BASE OMAP2_UART1_BASE -#define OMAP4_UART2_BASE OMAP2_UART2_BASE -#define OMAP4_UART3_BASE 0x48020000 -#define OMAP4_UART4_BASE 0x4806e000 - -/* TI81XX serial ports */ -#define TI81XX_UART1_BASE 0x48020000 -#define TI81XX_UART2_BASE 0x48022000 -#define TI81XX_UART3_BASE 0x48024000 - -/* AM3505/3517 UART4 */ -#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ - -/* AM33XX serial port */ -#define AM33XX_UART1_BASE 0x44E09000 - -/* OMAP5 serial ports */ -#define OMAP5_UART1_BASE OMAP2_UART1_BASE -#define OMAP5_UART2_BASE OMAP2_UART2_BASE -#define OMAP5_UART3_BASE OMAP4_UART3_BASE -#define OMAP5_UART4_BASE OMAP4_UART4_BASE -#define OMAP5_UART5_BASE 0x48066000 -#define OMAP5_UART6_BASE 0x48068000 - -/* External port on Zoom2/3 */ -#define ZOOM_UART_BASE 0x10000000 -#define ZOOM_UART_VIRT 0xfa400000 - -#define OMAP_PORT_SHIFT 2 -#define ZOOM_PORT_SHIFT 1 - -#define OMAP24XX_BASE_BAUD (48000000/16) - -#ifndef __ASSEMBLER__ - -struct omap_board_data; -struct omap_uart_port_info; - -extern void omap_serial_init(void); -extern void omap_serial_board_init(struct omap_uart_port_info *platform_data); -extern void omap_serial_init_port(struct omap_board_data *bdata, - struct omap_uart_port_info *platform_data); -#endif diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index 93c20bbd7b7e..9c8a85198e16 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -13,6 +13,7 @@ #include "clockdomain.h" #include "powerdomain.h" +#include "common.h" struct pwrdm_link { struct device *dev; diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c index 11677fc2968f..fb9c114b9dd7 100644 --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -124,7 +124,7 @@ phys_addr_t omap_secure_ram_mempool_base(void) } #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) -u32 omap3_save_secure_ram(void __iomem *addr, int size) +u32 omap3_save_secure_ram(void *addr, int size) { static u32 param[5]; u32 ret; diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index 172069f31616..9e67d4efdd0c 100644 --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -73,7 +73,7 @@ extern u32 omap_smc3(u32 id, u32 process, u32 flag, u32 pargs); extern phys_addr_t omap_secure_ram_mempool_base(void); extern int omap_secure_ram_reserve_memblock(void); extern u32 save_secure_ram_context(u32 args_pa); -extern u32 omap3_save_secure_ram(void __iomem *save_regs, int size); +extern u32 omap3_save_secure_ram(void *save_regs, int size); extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs, u32 arg1, u32 arg2, u32 arg3, u32 arg4); diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 5c3845730dbf..6d1eb4eefefe 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -139,7 +139,7 @@ static int __init omap4_sram_init(void) pr_warn("%s:Unable to get sram pool needed to handle errata I688\n", __func__); else - sram_sync = (void *)gen_pool_alloc(sram_pool, PAGE_SIZE); + sram_sync = (void __iomem *)gen_pool_alloc(sram_pool, PAGE_SIZE); return 0; } @@ -314,10 +314,12 @@ void __init omap_gic_of_init(void) np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic"); gic_dist_base_addr = of_iomap(np, 0); + of_node_put(np); WARN_ON(!gic_dist_base_addr); np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer"); twd_base = of_iomap(np, 0); + of_node_put(np); WARN_ON(!twd_base); skip_errata_init: diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 56d6814bec26..8b3701901991 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -96,9 +96,6 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias, * omap_device, this function adds an entry in the clkdev table of the * form <dev-id=dev_name, con-id=role> if it does not exist already. * - * The function is called from inside omap_device_build_ss(), after - * omap_device_register. - * * This allows drivers to get a pointer to its optional clocks based on its role * by calling clk_get(<dev*>, <role>). * In the case of the main clock, a "fck" alias is used. @@ -473,23 +470,6 @@ struct dev_pm_domain omap_device_pm_domain = { } }; -/** - * omap_device_register - register an omap_device with one omap_hwmod - * @pdev: the platform device (omap_device) to register. - * - * Register the omap_device structure. This currently just calls - * platform_device_register() on the underlying platform_device. - * Returns the return value of platform_device_register(). - */ -int omap_device_register(struct platform_device *pdev) -{ - pr_debug("omap_device: %s: registering\n", pdev->name); - - dev_pm_domain_set(&pdev->dev, &omap_device_pm_domain); - return platform_device_add(pdev); -} - - /* Public functions for use by device drivers through struct platform_data */ /** diff --git a/arch/arm/mach-omap2/omap_device.h b/arch/arm/mach-omap2/omap_device.h index f77e76a7841a..d607532cf5e0 100644 --- a/arch/arm/mach-omap2/omap_device.h +++ b/arch/arm/mach-omap2/omap_device.h @@ -71,7 +71,6 @@ int omap_device_idle(struct platform_device *pdev); struct omap_device *omap_device_alloc(struct platform_device *pdev, struct omap_hwmod **ohs, int oh_cnt); void omap_device_delete(struct omap_device *od); -int omap_device_register(struct platform_device *pdev); struct device *omap_device_get_by_hwmod_name(const char *oh_name); diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index e7fd29a502a0..13f1b89f74b8 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -43,17 +43,6 @@ struct pdata_init { static struct of_dev_auxdata omap_auxdata_lookup[]; static struct twl4030_gpio_platform_data twl_gpio_auxdata; -#if IS_ENABLED(CONFIG_OMAP_IOMMU) -int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request, - u8 *pwrst); -#else -static inline int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, - bool request, u8 *pwrst) -{ - return 0; -} -#endif - #ifdef CONFIG_MACH_NOKIA_N8X0 static void __init omap2420_n8x0_legacy_init(void) { diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 65b2d82efa27..fb2d48cfe756 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -752,8 +752,10 @@ int __init omap2_prm_base_init(void) data = (struct omap_prcm_init_data *)match->data; ret = of_address_to_resource(np, 0, &res); - if (ret) + if (ret) { + of_node_put(np); return ret; + } data->mem = ioremap(res.start, resource_size(&res)); @@ -799,8 +801,10 @@ int __init omap_prcm_init(void) data = match->data; ret = omap2_clk_provider_init(np, data->index, NULL, data->mem); - if (ret) + if (ret) { + of_node_put(np); return ret; + } } omap_cm_init(); diff --git a/arch/arm/mach-omap2/serial.h b/arch/arm/mach-omap2/serial.h index c4014f013df0..7ca1fcff453b 100644 --- a/arch/arm/mach-omap2/serial.h +++ b/arch/arm/mach-omap2/serial.h @@ -1 +1,66 @@ -#include <mach/serial.h> +/* + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* OMAP2 serial ports */ +#define OMAP2_UART1_BASE 0x4806a000 +#define OMAP2_UART2_BASE 0x4806c000 +#define OMAP2_UART3_BASE 0x4806e000 + +/* OMAP3 serial ports */ +#define OMAP3_UART1_BASE OMAP2_UART1_BASE +#define OMAP3_UART2_BASE OMAP2_UART2_BASE +#define OMAP3_UART3_BASE 0x49020000 +#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */ +#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */ + +/* OMAP4 serial ports */ +#define OMAP4_UART1_BASE OMAP2_UART1_BASE +#define OMAP4_UART2_BASE OMAP2_UART2_BASE +#define OMAP4_UART3_BASE 0x48020000 +#define OMAP4_UART4_BASE 0x4806e000 + +/* TI81XX serial ports */ +#define TI81XX_UART1_BASE 0x48020000 +#define TI81XX_UART2_BASE 0x48022000 +#define TI81XX_UART3_BASE 0x48024000 + +/* AM3505/3517 UART4 */ +#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ + +/* AM33XX serial port */ +#define AM33XX_UART1_BASE 0x44E09000 + +/* OMAP5 serial ports */ +#define OMAP5_UART1_BASE OMAP2_UART1_BASE +#define OMAP5_UART2_BASE OMAP2_UART2_BASE +#define OMAP5_UART3_BASE OMAP4_UART3_BASE +#define OMAP5_UART4_BASE OMAP4_UART4_BASE +#define OMAP5_UART5_BASE 0x48066000 +#define OMAP5_UART6_BASE 0x48068000 + +/* External port on Zoom2/3 */ +#define ZOOM_UART_BASE 0x10000000 +#define ZOOM_UART_VIRT 0xfa400000 + +#define OMAP_PORT_SHIFT 2 +#define ZOOM_PORT_SHIFT 1 + +#define OMAP24XX_BASE_BAUD (48000000/16) + +#ifndef __ASSEMBLER__ + +struct omap_board_data; +struct omap_uart_port_info; + +extern void omap_serial_init(void); +extern void omap_serial_board_init(struct omap_uart_port_info *platform_data); +extern void omap_serial_init_port(struct omap_board_data *bdata, + struct omap_uart_port_info *platform_data); +#endif diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c index c98855f5594b..39cf270da718 100644 --- a/arch/arm/mach-omap2/sram.c +++ b/arch/arm/mach-omap2/sram.c @@ -18,6 +18,7 @@ #include <asm/fncpy.h> #include <asm/tlb.h> #include <asm/cacheflush.h> +#include <asm/set_memory.h> #include <asm/mach/map.h> @@ -47,8 +48,68 @@ #define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) static unsigned long omap_sram_start; -static unsigned long omap_sram_skip; static unsigned long omap_sram_size; +static void __iomem *omap_sram_base; +static unsigned long omap_sram_skip; +static void __iomem *omap_sram_ceil; + +/* + * Memory allocator for SRAM: calculates the new ceiling address + * for pushing a function using the fncpy API. + * + * Note that fncpy requires the returned address to be aligned + * to an 8-byte boundary. + */ +static void *omap_sram_push_address(unsigned long size) +{ + unsigned long available, new_ceil = (unsigned long)omap_sram_ceil; + + available = omap_sram_ceil - (omap_sram_base + omap_sram_skip); + + if (size > available) { + pr_err("Not enough space in SRAM\n"); + return NULL; + } + + new_ceil -= size; + new_ceil = ROUND_DOWN(new_ceil, FNCPY_ALIGN); + omap_sram_ceil = IOMEM(new_ceil); + + return (void __force *)omap_sram_ceil; +} + +void *omap_sram_push(void *funcp, unsigned long size) +{ + void *sram; + unsigned long base; + int pages; + void *dst = NULL; + + sram = omap_sram_push_address(size); + if (!sram) + return NULL; + + base = (unsigned long)sram & PAGE_MASK; + pages = PAGE_ALIGN(size) / PAGE_SIZE; + + set_memory_rw(base, pages); + + dst = fncpy(sram, funcp, size); + + set_memory_ro(base, pages); + set_memory_x(base, pages); + + return dst; +} + +/* + * The SRAM context is lost during off-idle and stack + * needs to be reset. + */ +static void omap_sram_reset(void) +{ + omap_sram_ceil = omap_sram_base + omap_sram_size; +} /* * Depending on the target RAMFS firewall setup, the public usable amount of @@ -119,6 +180,8 @@ static void __init omap_detect_sram(void) */ static void __init omap2_map_sram(void) { + unsigned long base; + int pages; int cached = 1; if (cpu_is_omap34xx()) { @@ -132,8 +195,30 @@ static void __init omap2_map_sram(void) cached = 0; } - omap_map_sram(omap_sram_start, omap_sram_size, - omap_sram_skip, cached); + if (omap_sram_size == 0) + return; + + omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE); + omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, cached); + if (!omap_sram_base) { + pr_err("SRAM: Could not map\n"); + return; + } + + omap_sram_reset(); + + /* + * Looks like we need to preserve some bootloader code at the + * beginning of SRAM for jumping to flash for reboot to work... + */ + memset_io(omap_sram_base + omap_sram_skip, 0, + omap_sram_size - omap_sram_skip); + + base = (unsigned long)omap_sram_base; + pages = PAGE_ALIGN(omap_sram_size) / PAGE_SIZE; + + set_memory_ro(base, pages); + set_memory_x(base, pages); } static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h index 447bd3eed0fd..271062f23482 100644 --- a/arch/arm/mach-omap2/sram.h +++ b/arch/arm/mach-omap2/sram.h @@ -4,7 +4,6 @@ */ #ifndef __ASSEMBLY__ -#include <plat/sram.h> extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, u32 base_cs, u32 force_unlock); @@ -14,6 +13,10 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); extern void omap3_sram_restore_context(void); +extern int __init omap_sram_init(void); + +extern void *omap_sram_push(void *funcp, unsigned long size); + /* Do not use these */ extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl); extern unsigned long omap24xx_sram_reprogram_clock_sz; diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index c77f3b4e287b..bf833b51931d 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -2,6 +2,7 @@ menuconfig ARCH_ORION5X bool "Marvell Orion" depends on ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN select CPU_FEROCEON select GPIOLIB select MVEBU_MBUS diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 87cb47220e82..d69259b6b60d 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -696,12 +696,12 @@ static void __init dns323_init(void) pr_err("DNS-323: failed to setup power-off GPIO\n"); pm_power_off = dns323c_power_off; - /* Now, -this- should theorically be done by the sata_mv driver + /* Now, -this- should theoretically be done by the sata_mv driver * once I figure out what's going on there. Maybe the behaviour * of the LEDs should be somewhat passed via the platform_data. * for now, just whack the register and make the LEDs happy * - * Note: AFAIK, rev B1 needs the same treatement but I'll let + * Note: AFAIK, rev B1 needs the same treatment but I'll let * somebody else test it. */ writel(0x5, ORION5X_SATA_VIRT_BASE + 0x2c); diff --git a/arch/arm/mach-oxnas/Kconfig b/arch/arm/mach-oxnas/Kconfig index bee5f64c2e5f..a9ded7079268 100644 --- a/arch/arm/mach-oxnas/Kconfig +++ b/arch/arm/mach-oxnas/Kconfig @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_OXNAS bool "Oxford Semiconductor OXNAS Family SoCs" + depends on (ARCH_MULTI_V5 && CPU_LITTLE_ENDIAN) || ARCH_MULTI_V6 select ARCH_HAS_RESET_CONTROLLER select COMMON_CLK_OXNAS select GPIOLIB @@ -11,7 +12,6 @@ menuconfig ARCH_OXNAS select RESET_OXNAS select VERSATILE_FPGA_IRQ select PINCTRL - depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 help Support for OxNas SoC family developed by Oxford Semiconductor. diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 57f0be4065c1..a5df1d9f3360 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -1,4 +1,19 @@ # SPDX-License-Identifier: GPL-2.0-only +menuconfig ARCH_PXA + bool "PXA2xx/PXA3xx-based" + depends on ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN + select ARM_CPU_SUSPEND if PM + select CLKSRC_PXA + select CLKSRC_MMIO + select TIMER_OF + select CPU_XSCALE if !CPU_XSC3 + select GPIO_PXA + select GPIOLIB + select PLAT_PXA + help + Support for Intel/Marvell's PXA2xx/PXA3xx processor line. + if ARCH_PXA menu "Intel PXA2xx/PXA3xx Implementations" diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 68730ceb8b7c..0aec36e67dc1 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -37,7 +37,8 @@ obj-$(CONFIG_MACH_SAAR) += saar.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_ARCH_VIPER) += viper.o obj-$(CONFIG_MACH_ARCOM_ZEUS) += zeus.o -obj-$(CONFIG_MACH_BALLOON3) += balloon3.o +obj-$(CONFIG_ARCOM_PCMCIA) += viper-pcmcia.o +obj-$(CONFIG_MACH_BALLOON3) += balloon3.o balloon3-pcmcia.o obj-$(CONFIG_MACH_CSB726) += csb726.o obj-$(CONFIG_CSB726_CSB701) += csb701.o obj-$(CONFIG_MACH_CM_X300) += cm-x300.o @@ -47,18 +48,20 @@ obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o obj-$(CONFIG_MACH_XCEP) += xcep.o obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o +obj-$(CONFIG_TRIZEPS_PCMCIA) += trizeps4-pcmcia.o obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o obj-$(CONFIG_MACH_PCM027) += pcm027.o obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o -obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o +obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o colibri-pcmcia.o obj-$(CONFIG_MACH_COLIBRI_EVALBOARD) += colibri-evalboard.o obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME) += colibri-pxa270-income.o obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o -obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o -obj-$(CONFIG_MACH_VPAC270) += vpac270.o +obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o colibri-pcmcia.o +obj-$(CONFIG_MACH_VPAC270) += vpac270.o vpac270-pcmcia.o # End-user Products obj-$(CONFIG_MACH_H4700) += hx4700.o +obj-$(CONFIG_MACH_H4700) += hx4700-pcmcia.o obj-$(CONFIG_MACH_H5000) += h5000.o obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o obj-$(CONFIG_MACH_MAGICIAN) += magician.o @@ -66,12 +69,12 @@ obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o obj-$(CONFIG_PXA_EZX) += ezx.o obj-$(CONFIG_MACH_MP900C) += mp900.o obj-$(CONFIG_MACH_PALMTE2) += palmte2.o -obj-$(CONFIG_MACH_PALMTC) += palmtc.o +obj-$(CONFIG_MACH_PALMTC) += palmtc.o palmtc-pcmcia.o obj-$(CONFIG_MACH_PALM27X) += palm27x.o obj-$(CONFIG_MACH_PALMT5) += palmt5.o -obj-$(CONFIG_MACH_PALMTX) += palmtx.o +obj-$(CONFIG_MACH_PALMTX) += palmtx.o palmtx-pcmcia.o obj-$(CONFIG_MACH_PALMZ72) += palmz72.o -obj-$(CONFIG_MACH_PALMLD) += palmld.o +obj-$(CONFIG_MACH_PALMLD) += palmld.o palmld-pcmcia.o obj-$(CONFIG_PALM_TREO) += palmtreo.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o @@ -79,6 +82,7 @@ obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_TOSA) += tosa.o obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o +obj-$(CONFIG_MACH_E740) += e740-pcmcia.o obj-$(CONFIG_MACH_ZIPIT2) += z2.o obj-$(CONFIG_PXA_SYSTEMS_CPLDS) += pxa_cplds_irqs.o diff --git a/arch/arm/mach-pxa/Makefile.boot b/arch/arm/mach-pxa/Makefile.boot deleted file mode 100644 index bb6e353ecf06..000000000000 --- a/arch/arm/mach-pxa/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - zreladdr-y += 0xa0008000 - diff --git a/arch/arm/mach-pxa/include/mach/addr-map.h b/arch/arm/mach-pxa/addr-map.h index 93cfe7dbfec6..93cfe7dbfec6 100644 --- a/arch/arm/mach-pxa/include/mach/addr-map.h +++ b/arch/arm/mach-pxa/addr-map.h diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c index 17d08abeeb17..4b55bc89db8f 100644 --- a/arch/arm/mach-pxa/am300epd.c +++ b/arch/arm/mach-pxa/am300epd.c @@ -30,7 +30,7 @@ #include "gumstix.h" #include "mfp-pxa25x.h" -#include <mach/irqs.h> +#include "irqs.h" #include <linux/platform_data/video-pxafb.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/balloon3-pcmcia.c b/arch/arm/mach-pxa/balloon3-pcmcia.c new file mode 100644 index 000000000000..6a27b76cc603 --- /dev/null +++ b/arch/arm/mach-pxa/balloon3-pcmcia.c @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/pcmcia/pxa2xx_balloon3.c + * + * Balloon3 PCMCIA specific routines. + * + * Author: Nick Bane + * Created: June, 2006 + * Copyright: Toby Churchill Ltd + * Derived from pxa2xx_mainstone.c, by Nico Pitre + * + * Various modification by Marek Vasut <marek.vasut@gmail.com> + */ + +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include "balloon3.h" + +#include <asm/mach-types.h> + +#include <pcmcia/soc_common.h> + +static int balloon3_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + uint16_t ver; + + ver = __raw_readw(BALLOON3_FPGA_VER); + if (ver < 0x4f08) + pr_warn("The FPGA code, version 0x%04x, is too old. " + "PCMCIA/CF support might be broken in this version!", + ver); + + skt->socket.pci_irq = BALLOON3_BP_CF_NRDY_IRQ; + skt->stat[SOC_STAT_CD].gpio = BALLOON3_GPIO_S0_CD; + skt->stat[SOC_STAT_CD].name = "PCMCIA0 CD"; + skt->stat[SOC_STAT_BVD1].irq = BALLOON3_BP_NSTSCHG_IRQ; + skt->stat[SOC_STAT_BVD1].name = "PCMCIA0 STSCHG"; + + return 0; +} + +static unsigned long balloon3_pcmcia_status[2] = { + BALLOON3_CF_nSTSCHG_BVD1, + BALLOON3_CF_nSTSCHG_BVD1 +}; + +static void balloon3_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + uint16_t status; + int flip; + + /* This actually reads the STATUS register */ + status = __raw_readw(BALLOON3_CF_STATUS_REG); + flip = (status ^ balloon3_pcmcia_status[skt->nr]) + & BALLOON3_CF_nSTSCHG_BVD1; + /* + * Workaround for STSCHG which can't be deasserted: + * We therefore disable/enable corresponding IRQs + * as needed to avoid IRQ locks. + */ + if (flip) { + balloon3_pcmcia_status[skt->nr] = status; + if (status & BALLOON3_CF_nSTSCHG_BVD1) + enable_irq(BALLOON3_BP_NSTSCHG_IRQ); + else + disable_irq(BALLOON3_BP_NSTSCHG_IRQ); + } + + state->ready = !!(status & BALLOON3_CF_nIRQ); + state->bvd1 = !!(status & BALLOON3_CF_nSTSCHG_BVD1); + state->bvd2 = 0; /* not available */ + state->vs_3v = 1; /* Always true its a CF card */ + state->vs_Xv = 0; /* not available */ +} + +static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + __raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG + + ((state->flags & SS_RESET) ? + BALLOON3_FPGA_SETnCLR : 0)); + return 0; +} + +static struct pcmcia_low_level balloon3_pcmcia_ops = { + .owner = THIS_MODULE, + .hw_init = balloon3_pcmcia_hw_init, + .socket_state = balloon3_pcmcia_socket_state, + .configure_socket = balloon3_pcmcia_configure_socket, + .first = 0, + .nr = 1, +}; + +static struct platform_device *balloon3_pcmcia_device; + +static int __init balloon3_pcmcia_init(void) +{ + int ret; + + if (!machine_is_balloon3()) + return -ENODEV; + + balloon3_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!balloon3_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(balloon3_pcmcia_device, + &balloon3_pcmcia_ops, sizeof(balloon3_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(balloon3_pcmcia_device); + + if (ret) + platform_device_put(balloon3_pcmcia_device); + + return ret; +} + +static void __exit balloon3_pcmcia_exit(void) +{ + platform_device_unregister(balloon3_pcmcia_device); +} + +module_init(balloon3_pcmcia_init); +module_exit(balloon3_pcmcia_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Nick Bane <nick@cecomputing.co.uk>"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); +MODULE_DESCRIPTION("Balloon3 board CF/PCMCIA driver"); diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 26140249c784..896d47d9a8dc 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -40,8 +40,8 @@ #include <asm/mach/flash.h> #include "pxa27x.h" -#include <mach/balloon3.h> -#include <mach/audio.h> +#include "balloon3.h" +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include "udc.h" diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/balloon3.h index 04f3639c4082..04f3639c4082 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/balloon3.h diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 2e35354b61f5..01f364a66446 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -40,6 +40,8 @@ #include <linux/spi/spi_gpio.h> #include <linux/spi/tdo24m.h> +#include <linux/soc/pxa/cpu.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/setup.h> @@ -51,7 +53,7 @@ #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/usb-pxa3xx-ulpi.h> #include <asm/mach/map.h> @@ -354,13 +356,13 @@ static struct platform_device cm_x300_spi_gpio = { static struct gpiod_lookup_table cm_x300_spi_gpiod_table = { .dev_id = "spi_gpio", .table = { - GPIO_LOOKUP("gpio-pxa", GPIO_LCD_SCL, + GPIO_LOOKUP("pca9555.1", GPIO_LCD_SCL - GPIO_LCD_BASE, "sck", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-pxa", GPIO_LCD_DIN, + GPIO_LOOKUP("pca9555.1", GPIO_LCD_DIN - GPIO_LCD_BASE, "mosi", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-pxa", GPIO_LCD_DOUT, + GPIO_LOOKUP("pca9555.1", GPIO_LCD_DOUT - GPIO_LCD_BASE, "miso", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-pxa", GPIO_LCD_CS, + GPIO_LOOKUP("pca9555.1", GPIO_LCD_CS - GPIO_LCD_BASE, "cs", GPIO_ACTIVE_HIGH), { }, }, diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c index b9c173ede891..b62af07b8f96 100644 --- a/arch/arm/mach-pxa/colibri-evalboard.c +++ b/arch/arm/mach-pxa/colibri-evalboard.c @@ -13,7 +13,6 @@ #include <linux/interrupt.h> #include <linux/gpio/machine.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/mach/arch.h> #include <linux/i2c.h> #include <linux/platform_data/i2c-pxa.h> diff --git a/arch/arm/mach-pxa/colibri-pcmcia.c b/arch/arm/mach-pxa/colibri-pcmcia.c new file mode 100644 index 000000000000..9da7b478e5eb --- /dev/null +++ b/arch/arm/mach-pxa/colibri-pcmcia.c @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/pcmcia/pxa2xx_colibri.c + * + * Driver for Toradex Colibri PXA270 CF socket + * + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> + +#include <pcmcia/soc_common.h> + +#define COLIBRI270_RESET_GPIO 53 +#define COLIBRI270_PPEN_GPIO 107 +#define COLIBRI270_BVD1_GPIO 83 +#define COLIBRI270_BVD2_GPIO 82 +#define COLIBRI270_DETECT_GPIO 84 +#define COLIBRI270_READY_GPIO 1 + +#define COLIBRI320_RESET_GPIO 77 +#define COLIBRI320_PPEN_GPIO 57 +#define COLIBRI320_BVD1_GPIO 53 +#define COLIBRI320_BVD2_GPIO 79 +#define COLIBRI320_DETECT_GPIO 81 +#define COLIBRI320_READY_GPIO 29 + +enum { + DETECT = 0, + READY = 1, + BVD1 = 2, + BVD2 = 3, + PPEN = 4, + RESET = 5, +}; + +/* Contents of this array are configured on-the-fly in init function */ +static struct gpio colibri_pcmcia_gpios[] = { + { 0, GPIOF_IN, "PCMCIA Detect" }, + { 0, GPIOF_IN, "PCMCIA Ready" }, + { 0, GPIOF_IN, "PCMCIA BVD1" }, + { 0, GPIOF_IN, "PCMCIA BVD2" }, + { 0, GPIOF_INIT_LOW, "PCMCIA PPEN" }, + { 0, GPIOF_INIT_HIGH,"PCMCIA Reset" }, +}; + +static int colibri_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + int ret; + + ret = gpio_request_array(colibri_pcmcia_gpios, + ARRAY_SIZE(colibri_pcmcia_gpios)); + if (ret) + goto err1; + + skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpios[READY].gpio); + skt->stat[SOC_STAT_CD].irq = gpio_to_irq(colibri_pcmcia_gpios[DETECT].gpio); + skt->stat[SOC_STAT_CD].name = "PCMCIA CD"; + +err1: + return ret; +} + +static void colibri_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + gpio_free_array(colibri_pcmcia_gpios, + ARRAY_SIZE(colibri_pcmcia_gpios)); +} + +static void colibri_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + + state->detect = !!gpio_get_value(colibri_pcmcia_gpios[DETECT].gpio); + state->ready = !!gpio_get_value(colibri_pcmcia_gpios[READY].gpio); + state->bvd1 = !!gpio_get_value(colibri_pcmcia_gpios[BVD1].gpio); + state->bvd2 = !!gpio_get_value(colibri_pcmcia_gpios[BVD2].gpio); + state->vs_3v = 1; + state->vs_Xv = 0; +} + +static int +colibri_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + gpio_set_value(colibri_pcmcia_gpios[PPEN].gpio, + !(state->Vcc == 33 && state->Vpp < 50)); + gpio_set_value(colibri_pcmcia_gpios[RESET].gpio, + state->flags & SS_RESET); + return 0; +} + +static struct pcmcia_low_level colibri_pcmcia_ops = { + .owner = THIS_MODULE, + + .first = 0, + .nr = 1, + + .hw_init = colibri_pcmcia_hw_init, + .hw_shutdown = colibri_pcmcia_hw_shutdown, + + .socket_state = colibri_pcmcia_socket_state, + .configure_socket = colibri_pcmcia_configure_socket, +}; + +static struct platform_device *colibri_pcmcia_device; + +static int __init colibri_pcmcia_init(void) +{ + int ret; + + if (!machine_is_colibri() && !machine_is_colibri320()) + return -ENODEV; + + colibri_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!colibri_pcmcia_device) + return -ENOMEM; + + /* Colibri PXA270 */ + if (machine_is_colibri()) { + colibri_pcmcia_gpios[RESET].gpio = COLIBRI270_RESET_GPIO; + colibri_pcmcia_gpios[PPEN].gpio = COLIBRI270_PPEN_GPIO; + colibri_pcmcia_gpios[BVD1].gpio = COLIBRI270_BVD1_GPIO; + colibri_pcmcia_gpios[BVD2].gpio = COLIBRI270_BVD2_GPIO; + colibri_pcmcia_gpios[DETECT].gpio = COLIBRI270_DETECT_GPIO; + colibri_pcmcia_gpios[READY].gpio = COLIBRI270_READY_GPIO; + /* Colibri PXA320 */ + } else if (machine_is_colibri320()) { + colibri_pcmcia_gpios[RESET].gpio = COLIBRI320_RESET_GPIO; + colibri_pcmcia_gpios[PPEN].gpio = COLIBRI320_PPEN_GPIO; + colibri_pcmcia_gpios[BVD1].gpio = COLIBRI320_BVD1_GPIO; + colibri_pcmcia_gpios[BVD2].gpio = COLIBRI320_BVD2_GPIO; + colibri_pcmcia_gpios[DETECT].gpio = COLIBRI320_DETECT_GPIO; + colibri_pcmcia_gpios[READY].gpio = COLIBRI320_READY_GPIO; + } + + ret = platform_device_add_data(colibri_pcmcia_device, + &colibri_pcmcia_ops, sizeof(colibri_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(colibri_pcmcia_device); + + if (ret) + platform_device_put(colibri_pcmcia_device); + + return ret; +} + +static void __exit colibri_pcmcia_exit(void) +{ + platform_device_unregister(colibri_pcmcia_device); +} + +module_init(colibri_pcmcia_init); +module_exit(colibri_pcmcia_exit); + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("PCMCIA support for Toradex Colibri PXA270/PXA320"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c index e5879e8b0682..f6eaf464ca83 100644 --- a/arch/arm/mach-pxa/colibri-pxa270-income.c +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -25,7 +25,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include "pxa27x.h" diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 2f2cd2ae4187..5dc669752836 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -23,7 +23,7 @@ #include <asm/mach-types.h> #include <linux/sizes.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include "colibri.h" #include "pxa27x.h" diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index 82052dfd96b6..11ca6c4795e7 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -13,6 +13,7 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/interrupt.h> +#include <linux/soc/pxa/cpu.h> #include <asm/mach-types.h> #include <linux/sizes.h> @@ -23,7 +24,7 @@ #include "colibri.h" #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/video-pxafb.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 35dd3adb7712..1a59056e181e 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -24,7 +24,7 @@ #include "colibri.h" #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include "pxa27x-udc.h" #include "udc.h" diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index 3cead80a2b37..77d6ef5fa42d 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -13,12 +13,11 @@ #include <linux/gpio.h> #include <linux/etherdevice.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <linux/sizes.h> #include <asm/system_info.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> -#include <mach/pxa3xx-regs.h> +#include "pxa3xx-regs.h" #include "mfp-pxa300.h" #include "colibri.h" #include <linux/platform_data/mmc-pxamci.h> diff --git a/arch/arm/mach-pxa/colibri.h b/arch/arm/mach-pxa/colibri.h index 85525d49e321..01a46f36cc1f 100644 --- a/arch/arm/mach-pxa/colibri.h +++ b/arch/arm/mach-pxa/colibri.h @@ -3,7 +3,7 @@ #define _COLIBRI_H_ #include <net/ax88796.h> -#include <mach/mfp.h> +#include "mfp.h" /* * base board glue for PXA270 module diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 44659fbc37ba..c546356d0f02 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -39,7 +39,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/arch.h> @@ -50,7 +49,7 @@ #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/mmc-pxamci.h> #include "udc.h" -#include <mach/corgi.h> +#include "corgi.h" #include "sharpsl_pm.h" #include <asm/mach/sharpsl_param.h> @@ -473,6 +472,25 @@ static struct platform_device corgiled_device = { }, }; +static struct gpiod_lookup_table corgi_audio_gpio_table = { + .dev_id = "corgi-audio", + .table = { + GPIO_LOOKUP("sharp-scoop", + CORGI_GPIO_MUTE_L - CORGI_SCOOP_GPIO_BASE, + "mute-l", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sharp-scoop", + CORGI_GPIO_MUTE_R - CORGI_SCOOP_GPIO_BASE, + "mute-r", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sharp-scoop", + CORGI_GPIO_APM_ON - CORGI_SCOOP_GPIO_BASE, + "apm-on", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sharp-scoop", + CORGI_GPIO_MIC_BIAS - CORGI_SCOOP_GPIO_BASE, + "mic-bias", GPIO_ACTIVE_HIGH), + { }, + }, +}; + /* * Corgi Audio */ @@ -745,6 +763,7 @@ static void __init corgi_init(void) pxa_set_udc_info(&udc_info); gpiod_add_lookup_table(&corgi_mci_gpio_table); + gpiod_add_lookup_table(&corgi_audio_gpio_table); pxa_set_mci_info(&corgi_mci_platform_data); pxa_set_ficp_info(&corgi_ficp_platform_data); pxa_set_i2c_info(NULL); diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/corgi.h index b565ca7b8cda..b565ca7b8cda 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/corgi.h diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 092dcb9fced5..555a5c1afd96 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -19,10 +19,9 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <mach/hardware.h> -#include <mach/corgi.h> -#include <mach/pxa2xx-regs.h> +#include "corgi.h" +#include "pxa2xx-regs.h" #include "sharpsl_pm.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 98fcdc6e2944..410b1af87d55 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -17,12 +17,13 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> + #include "csb726.h" #include "pxa27x.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/audio.h> -#include <mach/smemc.h> +#include <linux/platform_data/asoc-pxa.h> +#include "smemc.h" #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/csb726.h b/arch/arm/mach-pxa/csb726.h index 30d7cf926b84..628928743bd5 100644 --- a/arch/arm/mach-pxa/csb726.h +++ b/arch/arm/mach-pxa/csb726.h @@ -7,7 +7,7 @@ #ifndef CSB726_H #define CSB726_H -#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ #define CSB726_GPIO_IRQ_LAN 52 #define CSB726_GPIO_IRQ_SM501 53 diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 09b8495f3fd9..a7b92dd1ca9e 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -9,21 +9,23 @@ #include <linux/dmaengine.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/platform_data/i2c-pxa.h> +#include <linux/soc/pxa/cpu.h> #include "udc.h" #include <linux/platform_data/usb-pxa3xx-ulpi.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/irda-pxaficp.h> -#include <mach/irqs.h> +#include "irqs.h" #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/keypad-pxa27x.h> #include <linux/platform_data/media/camera-pxa.h> -#include <mach/audio.h> -#include <mach/hardware.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/mmp_dma.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> +#include "regs-ost.h" +#include "reset.h" #include "devices.h" #include "generic.h" @@ -1118,3 +1120,12 @@ void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata) { pxa_register_device(&pxa2xx_pxa_dma, dma_pdata); } + +void __init pxa_register_wdt(unsigned int reset_status) +{ + struct resource res = DEFINE_RES_MEM(OST_PHYS, OST_LEN); + + reset_status &= RESET_STATUS_WATCHDOG; + platform_device_register_resndata(NULL, "sa1100_wdt", -1, &res, 1, + &reset_status, sizeof(reset_status)); +} diff --git a/arch/arm/mach-pxa/e740-pcmcia.c b/arch/arm/mach-pxa/e740-pcmcia.c new file mode 100644 index 000000000000..11a2c5d42920 --- /dev/null +++ b/arch/arm/mach-pxa/e740-pcmcia.c @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Toshiba e740 PCMCIA specific routines. + * + * (c) 2004 Ian Molton <spyro@f2s.com> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include "eseries-gpio.h" + +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <pcmcia/soc_common.h> + +static int e740_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + if (skt->nr == 0) { + skt->stat[SOC_STAT_CD].gpio = GPIO_E740_PCMCIA_CD0; + skt->stat[SOC_STAT_CD].name = "CF card detect"; + skt->stat[SOC_STAT_RDY].gpio = GPIO_E740_PCMCIA_RDY0; + skt->stat[SOC_STAT_RDY].name = "CF ready"; + } else { + skt->stat[SOC_STAT_CD].gpio = GPIO_E740_PCMCIA_CD1; + skt->stat[SOC_STAT_CD].name = "Wifi switch"; + skt->stat[SOC_STAT_RDY].gpio = GPIO_E740_PCMCIA_RDY1; + skt->stat[SOC_STAT_RDY].name = "Wifi ready"; + } + + return 0; +} + +static void e740_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + state->vs_3v = 1; + state->vs_Xv = 0; +} + +static int e740_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + if (state->flags & SS_RESET) { + if (skt->nr == 0) + gpio_set_value(GPIO_E740_PCMCIA_RST0, 1); + else + gpio_set_value(GPIO_E740_PCMCIA_RST1, 1); + } else { + if (skt->nr == 0) + gpio_set_value(GPIO_E740_PCMCIA_RST0, 0); + else + gpio_set_value(GPIO_E740_PCMCIA_RST1, 0); + } + + switch (state->Vcc) { + case 0: /* Socket off */ + if (skt->nr == 0) + gpio_set_value(GPIO_E740_PCMCIA_PWR0, 0); + else + gpio_set_value(GPIO_E740_PCMCIA_PWR1, 1); + break; + case 50: + case 33: /* socket on */ + if (skt->nr == 0) + gpio_set_value(GPIO_E740_PCMCIA_PWR0, 1); + else + gpio_set_value(GPIO_E740_PCMCIA_PWR1, 0); + break; + default: + printk(KERN_ERR "e740_cs: Unsupported Vcc: %d\n", state->Vcc); + } + + return 0; +} + +static struct pcmcia_low_level e740_pcmcia_ops = { + .owner = THIS_MODULE, + .hw_init = e740_pcmcia_hw_init, + .socket_state = e740_pcmcia_socket_state, + .configure_socket = e740_pcmcia_configure_socket, + .nr = 2, +}; + +static struct platform_device *e740_pcmcia_device; + +static int __init e740_pcmcia_init(void) +{ + int ret; + + if (!machine_is_e740()) + return -ENODEV; + + e740_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!e740_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(e740_pcmcia_device, &e740_pcmcia_ops, + sizeof(e740_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(e740_pcmcia_device); + + if (ret) + platform_device_put(e740_pcmcia_device); + + return ret; +} + +static void __exit e740_pcmcia_exit(void) +{ + platform_device_unregister(e740_pcmcia_device); +} + +module_init(e740_pcmcia_init); +module_exit(e740_pcmcia_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Ian Molton <spyro@f2s.com>"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); +MODULE_DESCRIPTION("e740 PCMCIA platform support"); diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/eseries-gpio.h index 5c645600d401..5c645600d401 100644 --- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h +++ b/arch/arm/mach-pxa/eseries-gpio.h diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index f37c44b6139d..08f8737aa8fd 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -24,6 +24,7 @@ #include <linux/mtd/rawnand.h> #include <linux/mtd/partitions.h> #include <linux/memblock.h> +#include <linux/gpio/machine.h> #include <video/w100fb.h> @@ -32,9 +33,9 @@ #include <asm/mach-types.h> #include "pxa25x.h" -#include <mach/eseries-gpio.h> +#include "eseries-gpio.h" #include "eseries-irq.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> #include "udc.h" #include <linux/platform_data/irda-pxaficp.h> @@ -520,6 +521,16 @@ static struct platform_device e740_audio_device = { .id = -1, }; +static struct gpiod_lookup_table e740_audio_gpio_table = { + .dev_id = "e740-audio", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_E740_WM9705_nAVDD2, "Audio power", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO_E740_AMP_ON, "Output amp", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO_E740_MIC_ON, "Mic amp", GPIO_ACTIVE_HIGH), + { }, + }, +}; + /* ----------------------------------------------------------------------- */ static struct platform_device *e740_devices[] __initdata = { @@ -540,6 +551,7 @@ static void __init e740_init(void) "UDCCLK", &pxa25x_device_udc.dev), eseries_get_tmio_gpios(); gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table); + gpiod_add_lookup_table(&e740_audio_gpio_table); platform_add_devices(ARRAY_AND_SIZE(e740_devices)); pxa_set_ac97_info(NULL); pxa_set_ficp_info(&e7xx_ficp_platform_data); @@ -699,7 +711,6 @@ static struct tc6393xb_platform_data e750_tc6393xb_info = { .irq_base = IRQ_BOARD_START, .scr_pll2cr = 0x0cc1, .scr_gper = 0, - .gpio_base = -1, .suspend = &eseries_tmio_suspend, .resume = &eseries_tmio_resume, .enable = &eseries_tmio_enable, @@ -716,6 +727,15 @@ static struct platform_device e750_tc6393xb_device = { .resource = eseries_tmio_resources, }; +static struct gpiod_lookup_table e750_audio_gpio_table = { + .dev_id = "e750-audio", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_E750_HP_AMP_OFF, "Output amp", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", GPIO_E750_SPK_AMP_OFF, "Mic amp", GPIO_ACTIVE_LOW), + { }, + }, +}; + static struct platform_device e750_audio_device = { .name = "e750-audio", .id = -1, @@ -740,6 +760,7 @@ static void __init e750_init(void) "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table); + gpiod_add_lookup_table(&e750_audio_gpio_table); platform_add_devices(ARRAY_AND_SIZE(e750_devices)); pxa_set_ac97_info(NULL); pxa_set_ficp_info(&e7xx_ficp_platform_data); @@ -918,7 +939,6 @@ static struct tc6393xb_platform_data e800_tc6393xb_info = { .irq_base = IRQ_BOARD_START, .scr_pll2cr = 0x0cc1, .scr_gper = 0, - .gpio_base = -1, .suspend = &eseries_tmio_suspend, .resume = &eseries_tmio_resume, .enable = &eseries_tmio_enable, @@ -935,6 +955,15 @@ static struct platform_device e800_tc6393xb_device = { .resource = eseries_tmio_resources, }; +static struct gpiod_lookup_table e800_audio_gpio_table = { + .dev_id = "e800-audio", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_E800_HP_AMP_OFF, "Output amp", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", GPIO_E800_SPK_AMP_ON, "Mic amp", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct platform_device e800_audio_device = { .name = "e800-audio", .id = -1, @@ -959,6 +988,7 @@ static void __init e800_init(void) "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); gpiod_add_lookup_table(&e800_gpio_vbus_gpiod_table); + gpiod_add_lookup_table(&e800_audio_gpio_table); platform_add_devices(ARRAY_AND_SIZE(e800_devices)); pxa_set_ac97_info(NULL); } diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index eb85950e7c0e..69c2ec02a16c 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -29,7 +29,6 @@ #include "pxa27x.h" #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/hardware.h> #include <linux/platform_data/keypad-pxa27x.h> #include <linux/platform_data/media/camera-pxa.h> diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index ab7cdffd7ea8..02fdde7e3e34 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -17,15 +17,18 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/soc/pxa/cpu.h> +#include <linux/soc/pxa/smemc.h> +#include <linux/clk/pxa.h> -#include <mach/hardware.h> #include <asm/mach/map.h> #include <asm/mach-types.h> -#include <mach/irqs.h> -#include <mach/reset.h> -#include <mach/smemc.h> -#include <mach/pxa3xx-regs.h> +#include "addr-map.h" +#include "irqs.h" +#include "reset.h" +#include "smemc.h" +#include "pxa3xx-regs.h" #include "generic.h" #include <clocksource/pxa.h> @@ -46,28 +49,47 @@ void clear_reset_status(unsigned int mask) void __init pxa_timer_init(void) { if (cpu_is_pxa25x()) - pxa25x_clocks_init(); + pxa25x_clocks_init(io_p2v(0x41300000)); if (cpu_is_pxa27x()) - pxa27x_clocks_init(); + pxa27x_clocks_init(io_p2v(0x41300000)); if (cpu_is_pxa3xx()) - pxa3xx_clocks_init(); + pxa3xx_clocks_init(io_p2v(0x41340000), io_p2v(0x41350000)); pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000)); } -/* - * Get the clock frequency as reflected by CCCR and the turbo flag. - * We assume these values have been applied via a fcs. - * If info is not 0 we also display the current settings. - */ -unsigned int get_clk_frequency_khz(int info) +void pxa_smemc_set_pcmcia_timing(int sock, u32 mcmem, u32 mcatt, u32 mcio) { - if (cpu_is_pxa25x()) - return pxa25x_get_clk_frequency_khz(info); - else if (cpu_is_pxa27x()) - return pxa27x_get_clk_frequency_khz(info); - return 0; + __raw_writel(mcmem, MCMEM(sock)); + __raw_writel(mcatt, MCATT(sock)); + __raw_writel(mcio, MCIO(sock)); +} +EXPORT_SYMBOL_GPL(pxa_smemc_set_pcmcia_timing); + +void pxa_smemc_set_pcmcia_socket(int nr) +{ + switch (nr) { + case 0: + __raw_writel(0, MECR); + break; + case 1: + /* + * We have at least one socket, so set MECR:CIT + * (Card Is There) + */ + __raw_writel(MECR_CIT, MECR); + break; + case 2: + /* Set CIT and MECR:NOS (Number Of Sockets) */ + __raw_writel(MECR_CIT | MECR_NOS, MECR); + break; + } +} +EXPORT_SYMBOL_GPL(pxa_smemc_set_pcmcia_socket); + +void __iomem *pxa_smemc_get_mdrefr(void) +{ + return MDREFR; } -EXPORT_SYMBOL(get_clk_frequency_khz); /* * Intel PXA2xx internal register mapping. diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 3b7873f8e1f8..7bb1499de4c5 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -10,7 +10,6 @@ struct irq_data; -extern unsigned int get_clk_frequency_khz(int info); extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int)); extern void __init pxa_map_io(void); @@ -23,19 +22,16 @@ extern void pxa_timer_init(void); #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) #define pxa25x_handle_irq icip_handle_irq -extern int __init pxa25x_clocks_init(void); extern void __init pxa25x_init_irq(void); extern void __init pxa25x_map_io(void); extern void __init pxa26x_init_irq(void); #define pxa27x_handle_irq ichp_handle_irq -extern int __init pxa27x_clocks_init(void); extern unsigned pxa27x_get_clk_frequency_khz(int); extern void __init pxa27x_init_irq(void); extern void __init pxa27x_map_io(void); #define pxa3xx_handle_irq ichp_handle_irq -extern int __init pxa3xx_clocks_init(void); extern void __init pxa3xx_init_irq(void); extern void __init pxa3xx_map_io(void); @@ -71,8 +67,3 @@ extern unsigned pxa25x_get_clk_frequency_khz(int); #define pxa27x_get_clk_frequency_khz(x) (0) #endif -#ifdef CONFIG_PXA3xx -extern unsigned pxa3xx_get_clk_frequency_khz(int); -#else -#define pxa3xx_get_clk_frequency_khz(x) (0) -#endif diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 49dd618b10f7..72b08a9bf0fd 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -28,7 +28,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <linux/sizes.h> diff --git a/arch/arm/mach-pxa/gumstix.h b/arch/arm/mach-pxa/gumstix.h index 470250cdee16..9005b3c0aabd 100644 --- a/arch/arm/mach-pxa/gumstix.h +++ b/arch/arm/mach-pxa/gumstix.h @@ -3,7 +3,7 @@ * arch/arm/mach-pxa/include/mach/gumstix.h */ -#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ /* BTRESET - Reset line to Bluetooth module, active low signal. */ #define GPIO_GUMSTIX_BTRESET 7 diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c index ece1e71c90a9..212efe24aedb 100644 --- a/arch/arm/mach-pxa/h5000.c +++ b/arch/arm/mach-pxa/h5000.c @@ -29,7 +29,7 @@ #include "pxa25x.h" #include "h5000.h" #include "udc.h" -#include <mach/smemc.h> +#include "smemc.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/hx4700-pcmcia.c b/arch/arm/mach-pxa/hx4700-pcmcia.c new file mode 100644 index 000000000000..e2331dfe427d --- /dev/null +++ b/arch/arm/mach-pxa/hx4700-pcmcia.c @@ -0,0 +1,118 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Paul Parsons <lost.distance@yahoo.com> + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/irq.h> + +#include <asm/mach-types.h> +#include "hx4700.h" + +#include <pcmcia/soc_common.h> + +static struct gpio gpios[] = { + { GPIO114_HX4700_CF_RESET, GPIOF_OUT_INIT_LOW, "CF reset" }, + { EGPIO4_CF_3V3_ON, GPIOF_OUT_INIT_LOW, "CF 3.3V enable" }, +}; + +static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + int ret; + + ret = gpio_request_array(gpios, ARRAY_SIZE(gpios)); + if (ret) + goto out; + + /* + * IRQ type must be set before soc_pcmcia_hw_init() calls request_irq(). + * The asic3 default IRQ type is level trigger low level detect, exactly + * the the signal present on GPIOD4_CF_nCD when a CF card is inserted. + * If the IRQ type is not changed, the asic3 interrupt handler will loop + * repeatedly because it is unable to clear the level trigger interrupt. + */ + irq_set_irq_type(gpio_to_irq(GPIOD4_CF_nCD), IRQ_TYPE_EDGE_BOTH); + + skt->stat[SOC_STAT_CD].gpio = GPIOD4_CF_nCD; + skt->stat[SOC_STAT_CD].name = "PCMCIA CD"; + skt->stat[SOC_STAT_RDY].gpio = GPIO60_HX4700_CF_RNB; + skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready"; + +out: + return ret; +} + +static void hx4700_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + gpio_free_array(gpios, ARRAY_SIZE(gpios)); +} + +static void hx4700_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + state->vs_3v = 1; + state->vs_Xv = 0; +} + +static int hx4700_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + switch (state->Vcc) { + case 0: + gpio_set_value(EGPIO4_CF_3V3_ON, 0); + break; + case 33: + gpio_set_value(EGPIO4_CF_3V3_ON, 1); + break; + default: + printk(KERN_ERR "pcmcia: Unsupported Vcc: %d\n", state->Vcc); + return -EINVAL; + } + + gpio_set_value(GPIO114_HX4700_CF_RESET, (state->flags & SS_RESET) != 0); + + return 0; +} + +static struct pcmcia_low_level hx4700_pcmcia_ops = { + .owner = THIS_MODULE, + .nr = 1, + .hw_init = hx4700_pcmcia_hw_init, + .hw_shutdown = hx4700_pcmcia_hw_shutdown, + .socket_state = hx4700_pcmcia_socket_state, + .configure_socket = hx4700_pcmcia_configure_socket, +}; + +static struct platform_device *hx4700_pcmcia_device; + +static int __init hx4700_pcmcia_init(void) +{ + struct platform_device *pdev; + + if (!machine_is_h4700()) + return -ENODEV; + + pdev = platform_device_register_data(NULL, "pxa2xx-pcmcia", -1, + &hx4700_pcmcia_ops, sizeof(hx4700_pcmcia_ops)); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + hx4700_pcmcia_device = pdev; + + return 0; +} + +static void __exit hx4700_pcmcia_exit(void) +{ + platform_device_unregister(hx4700_pcmcia_device); +} + +module_init(hx4700_pcmcia_init); +module_exit(hx4700_pcmcia_exit); + +MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>"); +MODULE_DESCRIPTION("HP iPAQ hx4700 PCMCIA driver"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index e1870fbb19e7..2ae06edf413c 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -36,12 +36,12 @@ #include <linux/spi/pxa2xx_spi.h> #include <linux/platform_data/i2c-pxa.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include "pxa27x.h" -#include <mach/hx4700.h> +#include "addr-map.h" +#include "hx4700.h" #include <linux/platform_data/irda-pxaficp.h> #include <sound/ak4641.h> @@ -834,6 +834,19 @@ static struct i2c_board_info i2c_board_info[] __initdata = { }, }; +static struct gpiod_lookup_table hx4700_audio_gpio_table = { + .dev_id = "hx4700-audio", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO75_HX4700_EARPHONE_nDET, + "earphone-det", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", GPIO92_HX4700_HP_DRIVER, + "hp-driver", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO107_HX4700_SPK_nSD, + "spk-sd", GPIO_ACTIVE_LOW), + { }, + }, +}; + static struct platform_device audio = { .name = "hx4700-audio", .id = -1, @@ -895,6 +908,7 @@ static void __init hx4700_init(void) gpiod_add_lookup_table(&bq24022_gpiod_table); gpiod_add_lookup_table(&gpio_vbus_gpiod_table); + gpiod_add_lookup_table(&hx4700_audio_gpio_table); platform_add_devices(devices, ARRAY_SIZE(devices)); pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup)); diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/hx4700.h index 0c30e6d9c660..0c30e6d9c660 100644 --- a/arch/arm/mach-pxa/include/mach/hx4700.h +++ b/arch/arm/mach-pxa/hx4700.h diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index fb0850af8496..525d01ddfbbb 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -22,7 +22,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/arch.h> @@ -31,7 +30,6 @@ #include "pxa25x.h" #include "idp.h" #include <linux/platform_data/video-pxafb.h> -#include <mach/bitfield.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/smc91x.h> diff --git a/arch/arm/mach-pxa/idp.h b/arch/arm/mach-pxa/idp.h index a89e6723b1a1..81b9bd9ba754 100644 --- a/arch/arm/mach-pxa/idp.h +++ b/arch/arm/mach-pxa/idp.h @@ -20,7 +20,7 @@ * IDP hardware. */ -#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ #define IDP_FLASH_PHYS (PXA_CS0_PHYS) #define IDP_ALT_FLASH_PHYS (PXA_CS1_PHYS) diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h deleted file mode 100644 index 7beebf7297b5..000000000000 --- a/arch/arm/mach-pxa/include/mach/audio.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_AUDIO_H__ -#define __ASM_ARCH_AUDIO_H__ - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/ac97_codec.h> - -/* - * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95) - * a -1 value means no gpio will be used for reset - * @codec_pdata: AC97 codec platform_data - - * reset_gpio should only be specified for pxa27x CPUs where a silicon - * bug prevents correct operation of the reset line. If not specified, - * the default behaviour on these CPUs is to consider gpio 113 as the - * AC97 reset line, which is the default on most boards. - */ -typedef struct { - int (*startup)(struct snd_pcm_substream *, void *); - void (*shutdown)(struct snd_pcm_substream *, void *); - void (*suspend)(void *); - void (*resume)(void *); - void *priv; - int reset_gpio; - void *codec_pdata[AC97_BUS_MAX_DEVICES]; -} pxa2xx_audio_ops_t; - -extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops); - -#endif diff --git a/arch/arm/mach-pxa/include/mach/bitfield.h b/arch/arm/mach-pxa/include/mach/bitfield.h deleted file mode 100644 index fe2ca441bc0a..000000000000 --- a/arch/arm/mach-pxa/include/mach/bitfield.h +++ /dev/null @@ -1,114 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * FILE bitfield.h - * - * Version 1.1 - * Author Copyright (c) Marc A. Viredaz, 1998 - * DEC Western Research Laboratory, Palo Alto, CA - * Date April 1998 (April 1997) - * System Advanced RISC Machine (ARM) - * Language C or ARM Assembly - * Purpose Definition of macros to operate on bit fields. - */ - - - -#ifndef __BITFIELD_H -#define __BITFIELD_H - -#ifndef __ASSEMBLY__ -#define UData(Data) ((unsigned long) (Data)) -#else -#define UData(Data) (Data) -#endif - - -/* - * MACRO: Fld - * - * Purpose - * The macro "Fld" encodes a bit field, given its size and its shift value - * with respect to bit 0. - * - * Note - * A more intuitive way to encode bit fields would have been to use their - * mask. However, extracting size and shift value information from a bit - * field's mask is cumbersome and might break the assembler (255-character - * line-size limit). - * - * Input - * Size Size of the bit field, in number of bits. - * Shft Shift value of the bit field with respect to bit 0. - * - * Output - * Fld Encoded bit field. - */ - -#define Fld(Size, Shft) (((Size) << 16) + (Shft)) - - -/* - * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit - * - * Purpose - * The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return - * the size, shift value, mask, aligned mask, and first bit of a - * bit field. - * - * Input - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FSize Size of the bit field, in number of bits. - * FShft Shift value of the bit field with respect to bit 0. - * FMsk Mask for the bit field. - * FAlnMsk Mask for the bit field, aligned on bit 0. - * F1stBit First bit of the bit field. - */ - -#define FSize(Field) ((Field) >> 16) -#define FShft(Field) ((Field) & 0x0000FFFF) -#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field)) -#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1) -#define F1stBit(Field) (UData (1) << FShft (Field)) - - -/* - * MACRO: FInsrt - * - * Purpose - * The macro "FInsrt" inserts a value into a bit field by shifting the - * former appropriately. - * - * Input - * Value Bit-field value. - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FInsrt Bit-field value positioned appropriately. - */ - -#define FInsrt(Value, Field) \ - (UData (Value) << FShft (Field)) - - -/* - * MACRO: FExtr - * - * Purpose - * The macro "FExtr" extracts the value of a bit field by masking and - * shifting it appropriately. - * - * Input - * Data Data containing the bit-field to be extracted. - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FExtr Bit-field value. - */ - -#define FExtr(Data, Field) \ - ((UData (Data) >> FShft (Field)) & FAlnMsk (Field)) - - -#endif /* __BITFIELD_H */ diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h deleted file mode 100644 index 79f9842a7e1c..000000000000 --- a/arch/arm/mach-pxa/include/mach/dma.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-pxa/include/mach/dma.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software, Inc. - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include <mach/hardware.h> - -/* DMA Controller Registers Definitions */ -#define DMAC_REGS_VIRT io_p2v(0x40000000) - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-pxa/include/mach/generic.h b/arch/arm/mach-pxa/include/mach/generic.h deleted file mode 100644 index 665542e0c9e2..000000000000 --- a/arch/arm/mach-pxa/include/mach/generic.h +++ /dev/null @@ -1 +0,0 @@ -#include "../../generic.h" diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h deleted file mode 100644 index ee7eab16135f..000000000000 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ /dev/null @@ -1,305 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-pxa/include/mach/hardware.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <mach/addr-map.h> - -/* - * Workarounds for at least 2 errata so far require this. - * The mapping is set in mach-pxa/generic.c. - */ -#define UNCACHED_PHYS_0 0xfe000000 -#define UNCACHED_PHYS_0_SIZE 0x00100000 - -/* - * Intel PXA2xx internal register mapping: - * - * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff - * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff - * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff - * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff - * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff - * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff - * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff - * - * Note that not all PXA2xx chips implement all those addresses, and the - * kernel only maps the minimum needed range of this mapping. - */ -#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1)) -#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) - -#ifndef __ASSEMBLY__ -# define __REG(x) (*((volatile u32 __iomem *)io_p2v(x))) - -/* With indexed regs we don't want to feed the index through io_p2v() - especially if it is a variable, otherwise horrible code will result. */ -# define __REG2(x,y) \ - (*(volatile u32 __iomem*)((u32)&__REG(x) + (y))) - -# define __PREG(x) (io_v2p((u32)&(x))) - -#else - -# define __REG(x) io_p2v(x) -# define __PREG(x) io_v2p(x) - -#endif - -#ifndef __ASSEMBLY__ - -#include <asm/cputype.h> - -/* - * CPU Stepping CPU_ID JTAG_ID - * - * PXA210 B0 0x69052922 0x2926C013 - * PXA210 B1 0x69052923 0x3926C013 - * PXA210 B2 0x69052924 0x4926C013 - * PXA210 C0 0x69052D25 0x5926C013 - * - * PXA250 A0 0x69052100 0x09264013 - * PXA250 A1 0x69052101 0x19264013 - * PXA250 B0 0x69052902 0x29264013 - * PXA250 B1 0x69052903 0x39264013 - * PXA250 B2 0x69052904 0x49264013 - * PXA250 C0 0x69052D05 0x59264013 - * - * PXA255 A0 0x69052D06 0x69264013 - * - * PXA26x A0 0x69052903 0x39264013 - * PXA26x B0 0x69052D05 0x59264013 - * - * PXA27x A0 0x69054110 0x09265013 - * PXA27x A1 0x69054111 0x19265013 - * PXA27x B0 0x69054112 0x29265013 - * PXA27x B1 0x69054113 0x39265013 - * PXA27x C0 0x69054114 0x49265013 - * PXA27x C5 0x69054117 0x79265013 - * - * PXA30x A0 0x69056880 0x0E648013 - * PXA30x A1 0x69056881 0x1E648013 - * PXA31x A0 0x69056890 0x0E649013 - * PXA31x A1 0x69056891 0x1E649013 - * PXA31x A2 0x69056892 0x2E649013 - * PXA32x B1 0x69056825 0x5E642013 - * PXA32x B2 0x69056826 0x6E642013 - * - * PXA930 B0 0x69056835 0x5E643013 - * PXA930 B1 0x69056837 0x7E643013 - * PXA930 B2 0x69056838 0x8E643013 - * - * PXA935 A0 0x56056931 0x1E653013 - * PXA935 B0 0x56056936 0x6E653013 - * PXA935 B1 0x56056938 0x8E653013 - */ -#ifdef CONFIG_PXA25x -#define __cpu_is_pxa210(id) \ - ({ \ - unsigned int _id = (id) & 0xf3f0; \ - _id == 0x2120; \ - }) - -#define __cpu_is_pxa250(id) \ - ({ \ - unsigned int _id = (id) & 0xf3ff; \ - _id <= 0x2105; \ - }) - -#define __cpu_is_pxa255(id) \ - ({ \ - unsigned int _id = (id) & 0xffff; \ - _id == 0x2d06; \ - }) - -#define __cpu_is_pxa25x(id) \ - ({ \ - unsigned int _id = (id) & 0xf300; \ - _id == 0x2100; \ - }) -#else -#define __cpu_is_pxa210(id) (0) -#define __cpu_is_pxa250(id) (0) -#define __cpu_is_pxa255(id) (0) -#define __cpu_is_pxa25x(id) (0) -#endif - -#ifdef CONFIG_PXA27x -#define __cpu_is_pxa27x(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x411; \ - }) -#else -#define __cpu_is_pxa27x(id) (0) -#endif - -#ifdef CONFIG_CPU_PXA300 -#define __cpu_is_pxa300(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x688; \ - }) -#else -#define __cpu_is_pxa300(id) (0) -#endif - -#ifdef CONFIG_CPU_PXA310 -#define __cpu_is_pxa310(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x689; \ - }) -#else -#define __cpu_is_pxa310(id) (0) -#endif - -#ifdef CONFIG_CPU_PXA320 -#define __cpu_is_pxa320(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x603 || _id == 0x682; \ - }) -#else -#define __cpu_is_pxa320(id) (0) -#endif - -#ifdef CONFIG_CPU_PXA930 -#define __cpu_is_pxa930(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x683; \ - }) -#else -#define __cpu_is_pxa930(id) (0) -#endif - -#ifdef CONFIG_CPU_PXA935 -#define __cpu_is_pxa935(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x693; \ - }) -#else -#define __cpu_is_pxa935(id) (0) -#endif - -#define cpu_is_pxa210() \ - ({ \ - __cpu_is_pxa210(read_cpuid_id()); \ - }) - -#define cpu_is_pxa250() \ - ({ \ - __cpu_is_pxa250(read_cpuid_id()); \ - }) - -#define cpu_is_pxa255() \ - ({ \ - __cpu_is_pxa255(read_cpuid_id()); \ - }) - -#define cpu_is_pxa25x() \ - ({ \ - __cpu_is_pxa25x(read_cpuid_id()); \ - }) - -#define cpu_is_pxa27x() \ - ({ \ - __cpu_is_pxa27x(read_cpuid_id()); \ - }) - -#define cpu_is_pxa300() \ - ({ \ - __cpu_is_pxa300(read_cpuid_id()); \ - }) - -#define cpu_is_pxa310() \ - ({ \ - __cpu_is_pxa310(read_cpuid_id()); \ - }) - -#define cpu_is_pxa320() \ - ({ \ - __cpu_is_pxa320(read_cpuid_id()); \ - }) - -#define cpu_is_pxa930() \ - ({ \ - __cpu_is_pxa930(read_cpuid_id()); \ - }) - -#define cpu_is_pxa935() \ - ({ \ - __cpu_is_pxa935(read_cpuid_id()); \ - }) - - - -/* - * CPUID Core Generation Bit - * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x - */ -#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) -#define __cpu_is_pxa2xx(id) \ - ({ \ - unsigned int _id = (id) >> 13 & 0x7; \ - _id <= 0x2; \ - }) -#else -#define __cpu_is_pxa2xx(id) (0) -#endif - -#ifdef CONFIG_PXA3xx -#define __cpu_is_pxa3xx(id) \ - ({ \ - __cpu_is_pxa300(id) \ - || __cpu_is_pxa310(id) \ - || __cpu_is_pxa320(id) \ - || __cpu_is_pxa93x(id); \ - }) -#else -#define __cpu_is_pxa3xx(id) (0) -#endif - -#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935) -#define __cpu_is_pxa93x(id) \ - ({ \ - __cpu_is_pxa930(id) \ - || __cpu_is_pxa935(id); \ - }) -#else -#define __cpu_is_pxa93x(id) (0) -#endif - -#define cpu_is_pxa2xx() \ - ({ \ - __cpu_is_pxa2xx(read_cpuid_id()); \ - }) - -#define cpu_is_pxa3xx() \ - ({ \ - __cpu_is_pxa3xx(read_cpuid_id()); \ - }) - -#define cpu_is_pxa93x() \ - ({ \ - __cpu_is_pxa93x(read_cpuid_id()); \ - }) - - -/* - * return current memory and LCD clock frequency in units of 10kHz - */ -extern unsigned int get_memclk_frequency_10khz(void); - -#endif - -#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h deleted file mode 100644 index 4b31bef9e50a..000000000000 --- a/arch/arm/mach-pxa/include/mach/mtd-xip.h +++ /dev/null @@ -1,36 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * MTD primitives for XIP support. Architecture specific functions - * - * Do not include this file directly. It's included from linux/mtd/xip.h - * - * Author: Nicolas Pitre - * Created: Nov 2, 2004 - * Copyright: (C) 2004 MontaVista Software, Inc. - */ - -#ifndef __ARCH_PXA_MTD_XIP_H__ -#define __ARCH_PXA_MTD_XIP_H__ - -#include <mach/regs-ost.h> - -/* restored July 2017, this did not build since 2011! */ - -#define ICIP io_p2v(0x40d00000) -#define ICMR io_p2v(0x40d00004) -#define xip_irqpending() (readl(ICIP) & readl(ICMR)) - -/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */ -#define xip_currtime() readl(OSCR) -#define xip_elapsed_since(x) (signed)((readl(OSCR) - (x)) / 4) - -/* - * xip_cpu_idle() is used when waiting for a delay equal or larger than - * the system timer tick period. This should put the CPU into idle mode - * to save power and to be woken up only when some interrupts are pending. - * As above, this should not rely upon standard kernel code. - */ - -#define xip_cpu_idle() asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1)) - -#endif /* __ARCH_PXA_MTD_XIP_H__ */ diff --git a/arch/arm/mach-pxa/include/mach/regs-ac97.h b/arch/arm/mach-pxa/include/mach/regs-ac97.h deleted file mode 100644 index 1db96fd4df32..000000000000 --- a/arch/arm/mach-pxa/include/mach/regs-ac97.h +++ /dev/null @@ -1,102 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_REGS_AC97_H -#define __ASM_ARCH_REGS_AC97_H - -#include <mach/hardware.h> - -/* - * AC97 Controller registers - */ - -#define POCR __REG(0x40500000) /* PCM Out Control Register */ -#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ -#define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ - -#define PICR __REG(0x40500004) /* PCM In Control Register */ -#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ -#define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ - -#define MCCR __REG(0x40500008) /* Mic In Control Register */ -#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ -#define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ - -#define GCR __REG(0x4050000C) /* Global Control Register */ -#ifdef CONFIG_PXA3xx -#define GCR_CLKBPB (1 << 31) /* Internal clock enable */ -#endif -#define GCR_nDMAEN (1 << 24) /* non DMA Enable */ -#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */ -#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */ -#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */ -#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */ -#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */ -#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */ -#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */ -#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */ -#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */ -#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */ - -#define POSR __REG(0x40500010) /* PCM Out Status Register */ -#define POSR_FIFOE (1 << 4) /* FIFO error */ -#define POSR_FSR (1 << 2) /* FIFO Service Request */ - -#define PISR __REG(0x40500014) /* PCM In Status Register */ -#define PISR_FIFOE (1 << 4) /* FIFO error */ -#define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ -#define PISR_FSR (1 << 2) /* FIFO Service Request */ - -#define MCSR __REG(0x40500018) /* Mic In Status Register */ -#define MCSR_FIFOE (1 << 4) /* FIFO error */ -#define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ -#define MCSR_FSR (1 << 2) /* FIFO Service Request */ - -#define GSR __REG(0x4050001C) /* Global Status Register */ -#define GSR_CDONE (1 << 19) /* Command Done */ -#define GSR_SDONE (1 << 18) /* Status Done */ -#define GSR_RDCS (1 << 15) /* Read Completion Status */ -#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */ -#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */ -#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */ -#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */ -#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */ -#define GSR_SCR (1 << 9) /* Secondary Codec Ready */ -#define GSR_PCR (1 << 8) /* Primary Codec Ready */ -#define GSR_MCINT (1 << 7) /* Mic In Interrupt */ -#define GSR_POINT (1 << 6) /* PCM Out Interrupt */ -#define GSR_PIINT (1 << 5) /* PCM In Interrupt */ -#define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */ -#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */ -#define GSR_MIINT (1 << 1) /* Modem In Interrupt */ -#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */ - -#define CAR __REG(0x40500020) /* CODEC Access Register */ -#define CAR_CAIP (1 << 0) /* Codec Access In Progress */ - -#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */ -#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */ - -#define MOCR __REG(0x40500100) /* Modem Out Control Register */ -#define MOCR_FEIE (1 << 3) /* FIFO Error */ -#define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ - -#define MICR __REG(0x40500108) /* Modem In Control Register */ -#define MICR_FEIE (1 << 3) /* FIFO Error */ -#define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ - -#define MOSR __REG(0x40500110) /* Modem Out Status Register */ -#define MOSR_FIFOE (1 << 4) /* FIFO error */ -#define MOSR_FSR (1 << 2) /* FIFO Service Request */ - -#define MISR __REG(0x40500118) /* Modem In Status Register */ -#define MISR_FIFOE (1 << 4) /* FIFO error */ -#define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ -#define MISR_FSR (1 << 2) /* FIFO Service Request */ - -#define MODR __REG(0x40500140) /* Modem FIFO Data Register */ - -#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */ -#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */ -#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */ -#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ - -#endif /* __ASM_ARCH_REGS_AC97_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-lcd.h b/arch/arm/mach-pxa/include/mach/regs-lcd.h deleted file mode 100644 index e2b6e3d1f625..000000000000 --- a/arch/arm/mach-pxa/include/mach/regs-lcd.h +++ /dev/null @@ -1,198 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_REGS_LCD_H -#define __ASM_ARCH_REGS_LCD_H - -#include <mach/bitfield.h> - -/* - * LCD Controller Registers and Bits Definitions - */ -#define LCCR0 (0x000) /* LCD Controller Control Register 0 */ -#define LCCR1 (0x004) /* LCD Controller Control Register 1 */ -#define LCCR2 (0x008) /* LCD Controller Control Register 2 */ -#define LCCR3 (0x00C) /* LCD Controller Control Register 3 */ -#define LCCR4 (0x010) /* LCD Controller Control Register 4 */ -#define LCCR5 (0x014) /* LCD Controller Control Register 5 */ -#define LCSR (0x038) /* LCD Controller Status Register 0 */ -#define LCSR1 (0x034) /* LCD Controller Status Register 1 */ -#define LIIDR (0x03C) /* LCD Controller Interrupt ID Register */ -#define TMEDRGBR (0x040) /* TMED RGB Seed Register */ -#define TMEDCR (0x044) /* TMED Control Register */ - -#define FBR0 (0x020) /* DMA Channel 0 Frame Branch Register */ -#define FBR1 (0x024) /* DMA Channel 1 Frame Branch Register */ -#define FBR2 (0x028) /* DMA Channel 2 Frame Branch Register */ -#define FBR3 (0x02C) /* DMA Channel 2 Frame Branch Register */ -#define FBR4 (0x030) /* DMA Channel 2 Frame Branch Register */ -#define FBR5 (0x110) /* DMA Channel 2 Frame Branch Register */ -#define FBR6 (0x114) /* DMA Channel 2 Frame Branch Register */ - -#define OVL1C1 (0x050) /* Overlay 1 Control Register 1 */ -#define OVL1C2 (0x060) /* Overlay 1 Control Register 2 */ -#define OVL2C1 (0x070) /* Overlay 2 Control Register 1 */ -#define OVL2C2 (0x080) /* Overlay 2 Control Register 2 */ - -#define CMDCR (0x100) /* Command Control Register */ -#define PRSR (0x104) /* Panel Read Status Register */ - -#define LCCR3_BPP(x) ((((x) & 0x7) << 24) | (((x) & 0x8) ? (1 << 29) : 0)) - -#define LCCR3_PDFOR_0 (0 << 30) -#define LCCR3_PDFOR_1 (1 << 30) -#define LCCR3_PDFOR_2 (2 << 30) -#define LCCR3_PDFOR_3 (3 << 30) - -#define LCCR4_PAL_FOR_0 (0 << 15) -#define LCCR4_PAL_FOR_1 (1 << 15) -#define LCCR4_PAL_FOR_2 (2 << 15) -#define LCCR4_PAL_FOR_3 (3 << 15) -#define LCCR4_PAL_FOR_MASK (3 << 15) - -#define FDADR0 (0x200) /* DMA Channel 0 Frame Descriptor Address Register */ -#define FDADR1 (0x210) /* DMA Channel 1 Frame Descriptor Address Register */ -#define FDADR2 (0x220) /* DMA Channel 2 Frame Descriptor Address Register */ -#define FDADR3 (0x230) /* DMA Channel 3 Frame Descriptor Address Register */ -#define FDADR4 (0x240) /* DMA Channel 4 Frame Descriptor Address Register */ -#define FDADR5 (0x250) /* DMA Channel 5 Frame Descriptor Address Register */ -#define FDADR6 (0x260) /* DMA Channel 6 Frame Descriptor Address Register */ - -#define LCCR0_ENB (1 << 0) /* LCD Controller enable */ -#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */ -#define LCCR0_Color (LCCR0_CMS*0) /* Color display */ -#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */ -#define LCCR0_SDS (1 << 2) /* Single/Dual Panel Display Select */ -#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */ -#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */ - -#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */ -#define LCCR0_SFM (1 << 4) /* Start of frame mask */ -#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */ -#define LCCR0_EFM (1 << 6) /* End of Frame mask */ -#define LCCR0_PAS (1 << 7) /* Passive/Active display Select */ -#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */ -#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */ -#define LCCR0_DPD (1 << 9) /* Double Pixel Data (monochrome) */ -#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome display */ -#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome display */ -#define LCCR0_DIS (1 << 10) /* LCD Disable */ -#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */ -#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */ -#define LCCR0_PDD_S 12 -#define LCCR0_BM (1 << 20) /* Branch mask */ -#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ -#define LCCR0_LCDT (1 << 22) /* LCD panel type */ -#define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */ -#define LCCR0_CMDIM (1 << 24) /* Command interrupt mask */ -#define LCCR0_OUC (1 << 25) /* Overlay Underlay control bit */ -#define LCCR0_LDDALT (1 << 26) /* LDD alternate mapping control */ - -#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ -#define LCCR1_DisWdth(Pixel) (((Pixel) - 1) << FShft (LCCR1_PPL)) - -#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ -#define LCCR1_HorSnchWdth(Tpix) (((Tpix) - 1) << FShft (LCCR1_HSW)) - -#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait - 1 */ -#define LCCR1_EndLnDel(Tpix) (((Tpix) - 1) << FShft (LCCR1_ELW)) - -#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ -#define LCCR1_BegLnDel(Tpix) (((Tpix) - 1) << FShft (LCCR1_BLW)) - -#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ -#define LCCR2_DisHght(Line) (((Line) - 1) << FShft (LCCR2_LPP)) - -#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse - 1 */ -#define LCCR2_VrtSnchWdth(Tln) (((Tln) - 1) << FShft (LCCR2_VSW)) - -#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ -#define LCCR2_EndFrmDel(Tln) ((Tln) << FShft (LCCR2_EFW)) - -#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ -#define LCCR2_BegFrmDel(Tln) ((Tln) << FShft (LCCR2_BFW)) - -#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */ -#define LCCR3_API_S 16 -#define LCCR3_VSP (1 << 20) /* vertical sync polarity */ -#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */ -#define LCCR3_PCP (1 << 22) /* Pixel Clock Polarity (L_PCLK) */ -#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */ -#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */ - -#define LCCR3_OEP (1 << 23) /* Output Enable Polarity */ -#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */ -#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */ - -#define LCCR3_DPC (1 << 27) /* double pixel clock mode */ -#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */ -#define LCCR3_PixClkDiv(Div) (((Div) << FShft (LCCR3_PCD))) - -#define LCCR3_ACB Fld (8, 8) /* AC Bias */ -#define LCCR3_Acb(Acb) (((Acb) << FShft (LCCR3_ACB))) - -#define LCCR3_HorSnchH (LCCR3_HSP*0) /* HSP Active High */ -#define LCCR3_HorSnchL (LCCR3_HSP*1) /* HSP Active Low */ - -#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* VSP Active High */ -#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* VSP Active Low */ - -#define LCCR5_IUM(x) (1 << ((x) + 23)) /* input underrun mask */ -#define LCCR5_BSM(x) (1 << ((x) + 15)) /* branch mask */ -#define LCCR5_EOFM(x) (1 << ((x) + 7)) /* end of frame mask */ -#define LCCR5_SOFM(x) (1 << ((x) + 0)) /* start of frame mask */ - -#define LCSR_LDD (1 << 0) /* LCD Disable Done */ -#define LCSR_SOF (1 << 1) /* Start of frame */ -#define LCSR_BER (1 << 2) /* Bus error */ -#define LCSR_ABC (1 << 3) /* AC Bias count */ -#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ -#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ -#define LCSR_OU (1 << 6) /* output FIFO underrun */ -#define LCSR_QD (1 << 7) /* quick disable */ -#define LCSR_EOF (1 << 8) /* end of frame */ -#define LCSR_BS (1 << 9) /* branch status */ -#define LCSR_SINT (1 << 10) /* subsequent interrupt */ -#define LCSR_RD_ST (1 << 11) /* read status */ -#define LCSR_CMD_INT (1 << 12) /* command interrupt */ - -#define LCSR1_IU(x) (1 << ((x) + 23)) /* Input FIFO underrun */ -#define LCSR1_BS(x) (1 << ((x) + 15)) /* Branch Status */ -#define LCSR1_EOF(x) (1 << ((x) + 7)) /* End of Frame Status */ -#define LCSR1_SOF(x) (1 << ((x) - 1)) /* Start of Frame Status */ - -#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ - -/* overlay control registers */ -#define OVLxC1_PPL(x) ((((x) - 1) & 0x3ff) << 0) /* Pixels Per Line */ -#define OVLxC1_LPO(x) ((((x) - 1) & 0x3ff) << 10) /* Number of Lines */ -#define OVLxC1_BPP(x) (((x) & 0xf) << 20) /* Bits Per Pixel */ -#define OVLxC1_OEN (1 << 31) /* Enable bit for Overlay */ -#define OVLxC2_XPOS(x) (((x) & 0x3ff) << 0) /* Horizontal Position */ -#define OVLxC2_YPOS(x) (((x) & 0x3ff) << 10) /* Vertical Position */ -#define OVL2C2_PFOR(x) (((x) & 0x7) << 20) /* Pixel Format */ - -/* smartpanel related */ -#define PRSR_DATA(x) ((x) & 0xff) /* Panel Data */ -#define PRSR_A0 (1 << 8) /* Read Data Source */ -#define PRSR_ST_OK (1 << 9) /* Status OK */ -#define PRSR_CON_NT (1 << 10) /* Continue to Next Command */ - -#define SMART_CMD_A0 (0x1 << 8) -#define SMART_CMD_READ_STATUS_REG (0x0 << 9) -#define SMART_CMD_READ_FRAME_BUFFER ((0x0 << 9) | SMART_CMD_A0) -#define SMART_CMD_WRITE_COMMAND (0x1 << 9) -#define SMART_CMD_WRITE_DATA ((0x1 << 9) | SMART_CMD_A0) -#define SMART_CMD_WRITE_FRAME ((0x2 << 9) | SMART_CMD_A0) -#define SMART_CMD_WAIT_FOR_VSYNC (0x3 << 9) -#define SMART_CMD_NOOP (0x4 << 9) -#define SMART_CMD_INTERRUPT (0x5 << 9) - -#define SMART_CMD(x) (SMART_CMD_WRITE_COMMAND | ((x) & 0xff)) -#define SMART_DAT(x) (SMART_CMD_WRITE_DATA | ((x) & 0xff)) - -/* SMART_DELAY() is introduced for software controlled delay primitive which - * can be inserted between command sequences, unused command 0x6 is used here - * and delay ranges from 0ms ~ 255ms - */ -#define SMART_CMD_DELAY (0x6 << 9) -#define SMART_DELAY(ms) (SMART_CMD_DELAY | ((ms) & 0xff)) -#endif /* __ASM_ARCH_REGS_LCD_H */ diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h deleted file mode 100644 index 1ed629e38ce6..000000000000 --- a/arch/arm/mach-pxa/include/mach/uncompress.h +++ /dev/null @@ -1,70 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-pxa/include/mach/uncompress.h - * - * Author: Nicolas Pitre - * Copyright: (C) 2001 MontaVista Software Inc. - */ - -#include <linux/serial_reg.h> -#include <asm/mach-types.h> - -#define FFUART_BASE (0x40100000) -#define BTUART_BASE (0x40200000) -#define STUART_BASE (0x40700000) - -unsigned long uart_base; -unsigned int uart_shift; -unsigned int uart_is_pxa; - -static inline unsigned char uart_read(int offset) -{ - return *(volatile unsigned char *)(uart_base + (offset << uart_shift)); -} - -static inline void uart_write(unsigned char val, int offset) -{ - *(volatile unsigned char *)(uart_base + (offset << uart_shift)) = val; -} - -static inline int uart_is_enabled(void) -{ - /* assume enabled by default for non-PXA uarts */ - return uart_is_pxa ? uart_read(UART_IER) & UART_IER_UUE : 1; -} - -static inline void putc(char c) -{ - if (!uart_is_enabled()) - return; - - while (!(uart_read(UART_LSR) & UART_LSR_THRE)) - barrier(); - - uart_write(c, UART_TX); -} - -/* - * This does not append a newline - */ -static inline void flush(void) -{ -} - -static inline void arch_decomp_setup(void) -{ - /* initialize to default */ - uart_base = FFUART_BASE; - uart_shift = 2; - uart_is_pxa = 1; - - if (machine_is_littleton() || machine_is_csb726() || - machine_is_cm_x300() || machine_is_balloon3()) - uart_base = STUART_BASE; - - if (machine_is_arcom_zeus()) { - uart_base = 0x10000000; /* nCS4 */ - uart_shift = 1; - uart_is_pxa = 0; - } -} diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 74efc3ab595f..96f33ef1d9ea 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -17,13 +17,14 @@ #include <linux/irq.h> #include <linux/of_address.h> #include <linux/of_irq.h> +#include <linux/soc/pxa/cpu.h> #include <asm/exception.h> -#include <mach/hardware.h> -#include <mach/irqs.h> +#include "irqs.h" #include "generic.h" +#include "pxa-regs.h" #define ICIP (0x000) #define ICMR (0x004) diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/irqs.h index 22bf536a462d..22bf536a462d 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/irqs.h diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 73f5953b3bb6..f98dc61e87af 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -31,7 +31,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 6fc40bc06910..0e4123c5fd42 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -28,7 +28,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <linux/sizes.h> @@ -39,12 +38,13 @@ #include "pxa27x.h" #include "lpd270.h" -#include <mach/audio.h> +#include "addr-map.h" +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/smemc.h> +#include "smemc.h" #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index e2411971422d..4f0944f3b262 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -34,7 +34,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <linux/sizes.h> @@ -46,14 +45,14 @@ #include <asm/hardware/sa1111.h> #include "pxa25x.h" -#include <mach/audio.h> -#include <mach/lubbock.h> +#include <linux/platform_data/asoc-pxa.h> +#include "lubbock.h" #include "udc.h" #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include "pm.h" -#include <mach/smemc.h> +#include "smemc.h" #include "generic.h" #include "devices.h" @@ -132,6 +131,13 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = { // no D+ pullup; lubbock can't connect/disconnect in software }; +static struct resource lubbock_udc_resources[] = { + DEFINE_RES_MEM(0x40600000, 0x10000), + DEFINE_RES_IRQ(IRQ_USB), + DEFINE_RES_IRQ(LUBBOCK_USB_IRQ), + DEFINE_RES_IRQ(LUBBOCK_USB_DISC_IRQ), +}; + /* GPIOs for SA1111 PCMCIA */ static struct gpiod_lookup_table sa1111_pcmcia_gpio_table = { .dev_id = "1800", @@ -497,6 +503,9 @@ static void __init lubbock_init(void) lubbock_init_pcmcia(); clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL); + /* lubbock has two extra IRQs */ + pxa25x_device_udc.resource = lubbock_udc_resources; + pxa25x_device_udc.num_resources = ARRAY_SIZE(lubbock_udc_resources); pxa_set_udc_info(&udc_info); pxa_set_fb_info(NULL, &sharp_lm8v31); pxa_set_mci_info(&lubbock_mci_platform_data); diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/lubbock.h index a3af4a2f9446..55cf91e22ae2 100644 --- a/arch/arm/mach-pxa/include/mach/lubbock.h +++ b/arch/arm/mach-pxa/lubbock.h @@ -1,13 +1,11 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * arch/arm/mach-pxa/include/mach/lubbock.h - * * Author: Nicolas Pitre * Created: Jun 15, 2001 * Copyright: MontaVista Software Inc. */ -#include <mach/irqs.h> +#include "irqs.h" #define LUBBOCK_ETH_PHYS PXA_CS3_PHYS diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 200fd35168e0..20456a55c4c5 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -29,13 +29,13 @@ #include <linux/regulator/machine.h> #include <linux/platform_data/i2c-pxa.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/system_info.h> #include "pxa27x.h" -#include <mach/magician.h> +#include "addr-map.h" +#include "magician.h" #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/irda-pxaficp.h> @@ -53,6 +53,7 @@ #include <linux/spi/spi.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/spi/ads7846.h> +#include <sound/uda1380.h> static unsigned long magician_pin_config[] __initdata = { @@ -681,7 +682,7 @@ static struct platform_device bq24022 = { static struct gpiod_lookup_table bq24022_gpiod_table = { .dev_id = "gpio-regulator", .table = { - GPIO_LOOKUP("gpio-pxa", EGPIO_MAGICIAN_BQ24022_ISET2, + GPIO_LOOKUP("htc-egpio-0", EGPIO_MAGICIAN_BQ24022_ISET2 - MAGICIAN_EGPIO_BASE, NULL, GPIO_ACTIVE_HIGH), GPIO_LOOKUP("gpio-pxa", GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, "enable", GPIO_ACTIVE_LOW), @@ -899,6 +900,53 @@ static struct platform_device strataflash = { }; /* + * audio support + */ +static struct uda1380_platform_data uda1380_info = { + .gpio_power = EGPIO_MAGICIAN_CODEC_POWER, + .gpio_reset = EGPIO_MAGICIAN_CODEC_RESET, + .dac_clk = UDA1380_DAC_CLK_WSPLL, +}; + +static struct i2c_board_info magician_audio_i2c_board_info[] = { + { + I2C_BOARD_INFO("uda1380", 0x18), + .platform_data = &uda1380_info, + }, +}; + +static struct gpiod_lookup_table magician_audio_gpio_table = { + .dev_id = "magician-audio", + .table = { + GPIO_LOOKUP("htc-egpio-0", + EGPIO_MAGICIAN_SPK_POWER - MAGICIAN_EGPIO_BASE, + "SPK_POWER", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("htc-egpio-0", + EGPIO_MAGICIAN_EP_POWER - MAGICIAN_EGPIO_BASE, + "EP_POWER", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("htc-egpio-0", + EGPIO_MAGICIAN_MIC_POWER - MAGICIAN_EGPIO_BASE, + "MIC_POWER", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("htc-egpio-0", + EGPIO_MAGICIAN_IN_SEL0 - MAGICIAN_EGPIO_BASE, + "IN_SEL0", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("htc-egpio-0", + EGPIO_MAGICIAN_IN_SEL1 - MAGICIAN_EGPIO_BASE, + "IN_SEL1", GPIO_ACTIVE_HIGH), + { }, + }, +}; + +static void magician_audio_init(void) +{ + i2c_register_board_info(0, + ARRAY_AND_SIZE(magician_audio_i2c_board_info)); + + gpiod_add_lookup_table(&magician_audio_gpio_table); + platform_device_register_simple("magician-audio", -1, NULL, 0); +} + +/* * PXA I2C main controller */ @@ -1048,6 +1096,8 @@ static void __init magician_init(void) gpiod_add_lookup_table(&bq24022_gpiod_table); gpiod_add_lookup_table(&gpio_vbus_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(devices)); + + magician_audio_init(); } MACHINE_START(MAGICIAN, "HTC Magician") diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/magician.h index 7d3af561af6f..e1e4f9f6b22b 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/magician.h @@ -9,7 +9,7 @@ #define _MAGICIAN_H_ #include <linux/gpio.h> -#include <mach/irqs.h> +#include "irqs.h" /* * PXA GPIOs diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index d237bd030238..fd386f1c414c 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -35,7 +35,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <linux/sizes.h> @@ -45,14 +44,15 @@ #include <asm/mach/flash.h> #include "pxa27x.h" -#include <mach/mainstone.h> -#include <mach/audio.h> +#include "mainstone.h" +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/keypad-pxa27x.h> -#include <mach/smemc.h> +#include "addr-map.h" +#include "smemc.h" #include "generic.h" #include "devices.h" @@ -548,6 +548,14 @@ static struct gpiod_lookup_table mainstone_pcmcia_gpio_table = { }, }; +static struct gpiod_lookup_table mainstone_wm97xx_gpio_table = { + .dev_id = "wm97xx-touch", + .table = { + GPIO_LOOKUP("gpio-pxa", 4, "touch", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static void __init mainstone_init(void) { int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */ @@ -562,6 +570,7 @@ static void __init mainstone_init(void) "mst-pcmcia1", MST_PCMCIA_INPUTS, 0, NULL, NULL, mst_pcmcia1_irqs); gpiod_add_lookup_table(&mainstone_pcmcia_gpio_table); + gpiod_add_lookup_table(&mainstone_wm97xx_gpio_table); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/mainstone.h index 1698f2ffd7c7..f116c56cf5d9 100644 --- a/arch/arm/mach-pxa/include/mach/mainstone.h +++ b/arch/arm/mach-pxa/mainstone.h @@ -1,7 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * arch/arm/mach-pxa/include/mach/mainstone.h - * * Author: Nicolas Pitre * Created: Nov 14, 2002 * Copyright: MontaVista Software Inc. @@ -10,7 +8,7 @@ #ifndef ASM_ARCH_MAINSTONE_H #define ASM_ARCH_MAINSTONE_H -#include <mach/irqs.h> +#include "irqs.h" #define MST_ETH_PHYS PXA_CS4_PHYS diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 6a5451b186c2..57b0782880de 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -16,8 +16,9 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/syscore_ops.h> +#include <linux/soc/pxa/cpu.h> -#include <mach/pxa2xx-regs.h> +#include "pxa2xx-regs.h" #include "mfp-pxa2xx.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.h b/arch/arm/mach-pxa/mfp-pxa2xx.h index 980145e7ee99..683a3ea5f154 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.h +++ b/arch/arm/mach-pxa/mfp-pxa2xx.h @@ -2,7 +2,7 @@ #ifndef __ASM_ARCH_MFP_PXA2XX_H #define __ASM_ARCH_MFP_PXA2XX_H -#include <plat/mfp.h> +#include <linux/soc/pxa/mfp.h> /* * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx: diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c index 56114df9700d..d16ab7451efe 100644 --- a/arch/arm/mach-pxa/mfp-pxa3xx.c +++ b/arch/arm/mach-pxa/mfp-pxa3xx.c @@ -16,9 +16,8 @@ #include <linux/io.h> #include <linux/syscore_ops.h> -#include <mach/hardware.h> #include "mfp-pxa3xx.h" -#include <mach/pxa3xx-regs.h> +#include "pxa3xx-regs.h" #ifdef CONFIG_PM /* diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.h b/arch/arm/mach-pxa/mfp-pxa3xx.h index cdd830926d1c..81fec4fa5a0f 100644 --- a/arch/arm/mach-pxa/mfp-pxa3xx.h +++ b/arch/arm/mach-pxa/mfp-pxa3xx.h @@ -2,7 +2,7 @@ #ifndef __ASM_ARCH_MFP_PXA3XX_H #define __ASM_ARCH_MFP_PXA3XX_H -#include <plat/mfp.h> +#include <linux/soc/pxa/mfp.h> #define MFPR_BASE (0x40e10000) diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/mfp.h index dbb961fb570e..7e0879bd4102 100644 --- a/arch/arm/mach-pxa/include/mach/mfp.h +++ b/arch/arm/mach-pxa/mfp.h @@ -13,6 +13,6 @@ #ifndef __ASM_ARCH_MFP_H #define __ASM_ARCH_MFP_H -#include <plat/mfp.h> +#include <linux/soc/pxa/mfp.h> #endif /* __ASM_ARCH_MFP_H */ diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index a79f296e81e0..d08f962ffb04 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -41,8 +41,8 @@ #include "udc.h" #include "pxa27x-udc.h" #include <linux/platform_data/media/camera-pxa.h> -#include <mach/audio.h> -#include <mach/smemc.h> +#include <linux/platform_data/asoc-pxa.h> +#include "smemc.h" #include "mioa701.h" diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c index fde386f6cffe..35546b59c88e 100644 --- a/arch/arm/mach-pxa/mxm8x10.c +++ b/arch/arm/mach-pxa/mxm8x10.c @@ -26,6 +26,7 @@ #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> +#include <linux/platform_data/asoc-pxa.h> #include "pxa320.h" #include "mxm8x10.h" @@ -356,14 +357,9 @@ void __init mxm_8x10_usb_host_init(void) pxa_set_ohci_info(&mxm_8x10_ohci_platform_data); } -/* AC97 Sound Support */ -static struct platform_device mxm_8x10_ac97_device = { - .name = "pxa2xx-ac97" -}; - void __init mxm_8x10_ac97_init(void) { - platform_device_register(&mxm_8x10_ac97_device); + pxa_set_ac97_info(NULL); } /* NAND flash Support */ diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 6230381a7ca0..1a8d25eecac3 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -25,7 +25,7 @@ #include <asm/mach/map.h> #include "pxa27x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/irda-pxaficp.h> diff --git a/arch/arm/mach-pxa/palmld-pcmcia.c b/arch/arm/mach-pxa/palmld-pcmcia.c new file mode 100644 index 000000000000..720294a50864 --- /dev/null +++ b/arch/arm/mach-pxa/palmld-pcmcia.c @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/pcmcia/pxa2xx_palmld.c + * + * Driver for Palm LifeDrive PCMCIA + * + * Copyright (C) 2006 Alex Osborne <ato@meshy.org> + * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com> + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <pcmcia/soc_common.h> + +#include "palmld.h" + +static struct gpio palmld_pcmcia_gpios[] = { + { GPIO_NR_PALMLD_PCMCIA_POWER, GPIOF_INIT_LOW, "PCMCIA Power" }, + { GPIO_NR_PALMLD_PCMCIA_RESET, GPIOF_INIT_HIGH,"PCMCIA Reset" }, +}; + +static int palmld_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + int ret; + + ret = gpio_request_array(palmld_pcmcia_gpios, + ARRAY_SIZE(palmld_pcmcia_gpios)); + + skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMLD_PCMCIA_READY; + skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready"; + + return ret; +} + +static void palmld_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + gpio_free_array(palmld_pcmcia_gpios, ARRAY_SIZE(palmld_pcmcia_gpios)); +} + +static void palmld_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + state->detect = 1; /* always inserted */ + state->vs_3v = 1; + state->vs_Xv = 0; +} + +static int palmld_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + gpio_set_value(GPIO_NR_PALMLD_PCMCIA_POWER, 1); + gpio_set_value(GPIO_NR_PALMLD_PCMCIA_RESET, + !!(state->flags & SS_RESET)); + + return 0; +} + +static struct pcmcia_low_level palmld_pcmcia_ops = { + .owner = THIS_MODULE, + + .first = 1, + .nr = 1, + + .hw_init = palmld_pcmcia_hw_init, + .hw_shutdown = palmld_pcmcia_hw_shutdown, + + .socket_state = palmld_pcmcia_socket_state, + .configure_socket = palmld_pcmcia_configure_socket, +}; + +static struct platform_device *palmld_pcmcia_device; + +static int __init palmld_pcmcia_init(void) +{ + int ret; + + if (!machine_is_palmld()) + return -ENODEV; + + palmld_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!palmld_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(palmld_pcmcia_device, &palmld_pcmcia_ops, + sizeof(palmld_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(palmld_pcmcia_device); + + if (ret) + platform_device_put(palmld_pcmcia_device); + + return ret; +} + +static void __exit palmld_pcmcia_exit(void) +{ + platform_device_unregister(palmld_pcmcia_device); +} + +module_init(palmld_pcmcia_init); +module_exit(palmld_pcmcia_exit); + +MODULE_AUTHOR("Alex Osborne <ato@meshy.org>," + " Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("PCMCIA support for Palm LifeDrive"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 5f73716a77f0..32308c63884e 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -29,8 +29,8 @@ #include <asm/mach/map.h> #include "pxa27x.h" -#include <mach/audio.h> -#include <mach/palmld.h> +#include "palmld.h" +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/irda-pxaficp.h> @@ -279,9 +279,15 @@ static inline void palmld_leds_init(void) {} * HDD ******************************************************************************/ #if defined(CONFIG_PATA_PALMLD) || defined(CONFIG_PATA_PALMLD_MODULE) +static struct resource palmld_ide_resources[] = { + DEFINE_RES_MEM(PALMLD_IDE_PHYS, 0x1000), +}; + static struct platform_device palmld_ide_device = { - .name = "pata_palmld", - .id = -1, + .name = "pata_palmld", + .id = -1, + .resource = palmld_ide_resources, + .num_resources = ARRAY_SIZE(palmld_ide_resources), }; static struct gpiod_lookup_table palmld_ide_gpio_table = { @@ -341,6 +347,14 @@ static struct gpiod_lookup_table palmld_mci_gpio_table = { }, }; +static struct gpiod_lookup_table palmld_wm97xx_touch_gpio_table = { + .dev_id = "wm97xx-touch", + .table = { + GPIO_LOOKUP("gpio-pxa", 27, "touch", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static void __init palmld_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config)); @@ -349,6 +363,7 @@ static void __init palmld_init(void) pxa_set_stuart_info(NULL); palm27x_mmc_init(&palmld_mci_gpio_table); + gpiod_add_lookup_table(&palmld_wm97xx_touch_gpio_table); palm27x_pm_init(PALMLD_STR_BASE); palm27x_lcd_init(-1, &palm_320x480_lcd_mode); palm27x_irda_init(GPIO_NR_PALMLD_IR_DISABLE); diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/palmld.h index 99a6d8b3a1e3..99a6d8b3a1e3 100644 --- a/arch/arm/mach-pxa/include/mach/palmld.h +++ b/arch/arm/mach-pxa/palmld.h diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 7c7cbb4e677e..463b62ec1b01 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -29,7 +29,7 @@ #include <asm/mach/map.h> #include "pxa27x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include "palmt5.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> @@ -190,6 +190,14 @@ static struct gpiod_lookup_table palmt5_mci_gpio_table = { }, }; +static struct gpiod_lookup_table palmt5_wm97xx_touch_gpio_table = { + .dev_id = "wm97xx-touch", + .table = { + GPIO_LOOKUP("gpio-pxa", 27, "touch", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static void __init palmt5_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config)); @@ -198,6 +206,7 @@ static void __init palmt5_init(void) pxa_set_stuart_info(NULL); palm27x_mmc_init(&palmt5_mci_gpio_table); + gpiod_add_lookup_table(&palmt5_wm97xx_touch_gpio_table); palm27x_pm_init(PALMT5_STR_BASE); palm27x_lcd_init(-1, &palm_320x480_lcd_mode); palm27x_udc_init(GPIO_NR_PALMT5_USB_DETECT_N, diff --git a/arch/arm/mach-pxa/palmt5.h b/arch/arm/mach-pxa/palmt5.h index 1fb1da7c8da3..cf84aedca717 100644 --- a/arch/arm/mach-pxa/palmt5.h +++ b/arch/arm/mach-pxa/palmt5.h @@ -11,7 +11,7 @@ #ifndef _INCLUDE_PALMT5_H_ #define _INCLUDE_PALMT5_H_ -#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ /** HERE ARE GPIOs **/ diff --git a/arch/arm/mach-pxa/palmtc-pcmcia.c b/arch/arm/mach-pxa/palmtc-pcmcia.c new file mode 100644 index 000000000000..8e3f382343fe --- /dev/null +++ b/arch/arm/mach-pxa/palmtc-pcmcia.c @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/pcmcia/pxa2xx_palmtc.c + * + * Driver for Palm Tungsten|C PCMCIA + * + * Copyright (C) 2008 Alex Osborne <ato@meshy.org> + * Copyright (C) 2009-2011 Marek Vasut <marek.vasut@gmail.com> + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/delay.h> + +#include <asm/mach-types.h> +#include "palmtc.h" +#include <pcmcia/soc_common.h> + +static struct gpio palmtc_pcmcia_gpios[] = { + { GPIO_NR_PALMTC_PCMCIA_POWER1, GPIOF_INIT_LOW, "PCMCIA Power 1" }, + { GPIO_NR_PALMTC_PCMCIA_POWER2, GPIOF_INIT_LOW, "PCMCIA Power 2" }, + { GPIO_NR_PALMTC_PCMCIA_POWER3, GPIOF_INIT_LOW, "PCMCIA Power 3" }, + { GPIO_NR_PALMTC_PCMCIA_RESET, GPIOF_INIT_HIGH,"PCMCIA Reset" }, + { GPIO_NR_PALMTC_PCMCIA_PWRREADY, GPIOF_IN, "PCMCIA Power Ready" }, +}; + +static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + int ret; + + ret = gpio_request_array(palmtc_pcmcia_gpios, + ARRAY_SIZE(palmtc_pcmcia_gpios)); + + skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMTC_PCMCIA_READY; + skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready"; + + return ret; +} + +static void palmtc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + gpio_free_array(palmtc_pcmcia_gpios, ARRAY_SIZE(palmtc_pcmcia_gpios)); +} + +static void palmtc_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + state->detect = 1; /* always inserted */ + state->vs_3v = 1; + state->vs_Xv = 0; +} + +static int palmtc_wifi_powerdown(void) +{ + gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1); + gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 0); + mdelay(40); + gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 0); + return 0; +} + +static int palmtc_wifi_powerup(void) +{ + int timeout = 50; + + gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 1); + mdelay(50); + + /* Power up the card, 1.8V first, after a while 3.3V */ + gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 1); + mdelay(100); + gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 1); + + /* Wait till the card is ready */ + while (!gpio_get_value(GPIO_NR_PALMTC_PCMCIA_PWRREADY) && + timeout) { + mdelay(1); + timeout--; + } + + /* Power down the WiFi in case of error */ + if (!timeout) { + palmtc_wifi_powerdown(); + return 1; + } + + /* Reset the card */ + gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1); + mdelay(20); + gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 0); + mdelay(25); + + gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 0); + + return 0; +} + +static int palmtc_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + int ret = 1; + + if (state->Vcc == 0) + ret = palmtc_wifi_powerdown(); + else if (state->Vcc == 33) + ret = palmtc_wifi_powerup(); + + return ret; +} + +static struct pcmcia_low_level palmtc_pcmcia_ops = { + .owner = THIS_MODULE, + + .first = 0, + .nr = 1, + + .hw_init = palmtc_pcmcia_hw_init, + .hw_shutdown = palmtc_pcmcia_hw_shutdown, + + .socket_state = palmtc_pcmcia_socket_state, + .configure_socket = palmtc_pcmcia_configure_socket, +}; + +static struct platform_device *palmtc_pcmcia_device; + +static int __init palmtc_pcmcia_init(void) +{ + int ret; + + if (!machine_is_palmtc()) + return -ENODEV; + + palmtc_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!palmtc_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(palmtc_pcmcia_device, &palmtc_pcmcia_ops, + sizeof(palmtc_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(palmtc_pcmcia_device); + + if (ret) + platform_device_put(palmtc_pcmcia_device); + + return ret; +} + +static void __exit palmtc_pcmcia_exit(void) +{ + platform_device_unregister(palmtc_pcmcia_device); +} + +module_init(palmtc_pcmcia_init); +module_exit(palmtc_pcmcia_exit); + +MODULE_AUTHOR("Alex Osborne <ato@meshy.org>," + " Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("PCMCIA support for Palm Tungsten|C"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 455cb8ccaf26..3054ffa397ad 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -29,8 +29,8 @@ #include <asm/mach/map.h> #include "pxa25x.h" -#include <mach/audio.h> -#include <mach/palmtc.h> +#include <linux/platform_data/asoc-pxa.h> +#include "palmtc.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/irda-pxaficp.h> diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/palmtc.h index 9257a02c46e5..9257a02c46e5 100644 --- a/arch/arm/mach-pxa/include/mach/palmtc.h +++ b/arch/arm/mach-pxa/palmtc.h diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index a2b10db4aacc..fedac670a8af 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -29,7 +29,7 @@ #include <asm/mach/map.h> #include "pxa25x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include "palmte2.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 2bf0f7f3ea24..238a31f32cba 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -29,7 +29,7 @@ #include "pxa27x.h" #include "pxa27x-udc.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include "palmtreo.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> @@ -37,7 +37,7 @@ #include <linux/platform_data/keypad-pxa27x.h> #include "udc.h" #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/pxa2xx-regs.h> +#include "pxa2xx-regs.h" #include <linux/platform_data/asoc-palm27x.h> #include <linux/platform_data/media/camera-pxa.h> #include "palm27x.h" diff --git a/arch/arm/mach-pxa/palmtx-pcmcia.c b/arch/arm/mach-pxa/palmtx-pcmcia.c new file mode 100644 index 000000000000..8c2aaad93043 --- /dev/null +++ b/arch/arm/mach-pxa/palmtx-pcmcia.c @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/pcmcia/pxa2xx_palmtx.c + * + * Driver for Palm T|X PCMCIA + * + * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com> + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include "palmtx.h" +#include <pcmcia/soc_common.h> + +static struct gpio palmtx_pcmcia_gpios[] = { + { GPIO_NR_PALMTX_PCMCIA_POWER1, GPIOF_INIT_LOW, "PCMCIA Power 1" }, + { GPIO_NR_PALMTX_PCMCIA_POWER2, GPIOF_INIT_LOW, "PCMCIA Power 2" }, + { GPIO_NR_PALMTX_PCMCIA_RESET, GPIOF_INIT_HIGH,"PCMCIA Reset" }, +}; + +static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + int ret; + + ret = gpio_request_array(palmtx_pcmcia_gpios, + ARRAY_SIZE(palmtx_pcmcia_gpios)); + + skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMTX_PCMCIA_READY; + skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready"; + + return ret; +} + +static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + gpio_free_array(palmtx_pcmcia_gpios, ARRAY_SIZE(palmtx_pcmcia_gpios)); +} + +static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + state->detect = 1; /* always inserted */ + state->vs_3v = 1; + state->vs_Xv = 0; +} + +static int +palmtx_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + gpio_set_value(GPIO_NR_PALMTX_PCMCIA_POWER1, 1); + gpio_set_value(GPIO_NR_PALMTX_PCMCIA_POWER2, 1); + gpio_set_value(GPIO_NR_PALMTX_PCMCIA_RESET, + !!(state->flags & SS_RESET)); + + return 0; +} + +static struct pcmcia_low_level palmtx_pcmcia_ops = { + .owner = THIS_MODULE, + + .first = 0, + .nr = 1, + + .hw_init = palmtx_pcmcia_hw_init, + .hw_shutdown = palmtx_pcmcia_hw_shutdown, + + .socket_state = palmtx_pcmcia_socket_state, + .configure_socket = palmtx_pcmcia_configure_socket, +}; + +static struct platform_device *palmtx_pcmcia_device; + +static int __init palmtx_pcmcia_init(void) +{ + int ret; + + if (!machine_is_palmtx()) + return -ENODEV; + + palmtx_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!palmtx_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(palmtx_pcmcia_device, &palmtx_pcmcia_ops, + sizeof(palmtx_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(palmtx_pcmcia_device); + + if (ret) + platform_device_put(palmtx_pcmcia_device); + + return ret; +} + +static void __exit palmtx_pcmcia_exit(void) +{ + platform_device_unregister(palmtx_pcmcia_device); +} + +module_init(palmtx_pcmcia_init); +module_exit(palmtx_pcmcia_exit); + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("PCMCIA support for Palm T|X"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 07332c92c9f7..c0d0762540ab 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -32,8 +32,8 @@ #include <asm/mach/map.h> #include "pxa27x.h" -#include <mach/audio.h> -#include <mach/palmtx.h> +#include <linux/platform_data/asoc-pxa.h> +#include "palmtx.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/irda-pxaficp.h> @@ -345,6 +345,14 @@ static struct gpiod_lookup_table palmtx_mci_gpio_table = { }, }; +static struct gpiod_lookup_table palmtx_wm97xx_touch_gpio_table = { + .dev_id = "wm97xx-touch", + .table = { + GPIO_LOOKUP("gpio-pxa", 27, "touch", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static void __init palmtx_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config)); @@ -353,6 +361,7 @@ static void __init palmtx_init(void) pxa_set_stuart_info(NULL); palm27x_mmc_init(&palmtx_mci_gpio_table); + gpiod_add_lookup_table(&palmtx_wm97xx_touch_gpio_table); palm27x_pm_init(PALMTX_STR_BASE); palm27x_lcd_init(-1, &palm_320x480_lcd_mode); palm27x_udc_init(GPIO_NR_PALMTX_USB_DETECT_N, diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/palmtx.h index ec88abf0fc6c..ec88abf0fc6c 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/palmtx.h diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index b4a5fe02a0af..66e8fe6f1661 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -34,7 +34,7 @@ #include <asm/mach/map.h> #include "pxa27x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include "palmz72.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> diff --git a/arch/arm/mach-pxa/pcm027.h b/arch/arm/mach-pxa/pcm027.h index 0c4ab636ce4e..58ade4ad6ba3 100644 --- a/arch/arm/mach-pxa/pcm027.h +++ b/arch/arm/mach-pxa/pcm027.h @@ -10,7 +10,7 @@ * Definitions of CPU card resources only */ -#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ /* phyCORE-PXA270 (PCM027) Interrupts */ #define PCM027_IRQ(x) (IRQ_BOARD_START + (x)) diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 8dfcc366d0fe..33a9d2eeca1c 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -26,7 +26,7 @@ #include <asm/mach/map.h> #include "pxa27x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include "pcm990_baseboard.h" diff --git a/arch/arm/mach-pxa/pcm990_baseboard.h b/arch/arm/mach-pxa/pcm990_baseboard.h index 5be11d1b7019..18cf71decb03 100644 --- a/arch/arm/mach-pxa/pcm990_baseboard.h +++ b/arch/arm/mach-pxa/pcm990_baseboard.h @@ -7,7 +7,7 @@ */ #include "pcm027.h" -#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ /* * definitions relevant only when the PCM-990 diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 58cfa434afde..7772a39430ed 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -30,7 +30,6 @@ #include <linux/mtd/sharpsl.h> #include <linux/memblock.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/irq.h> #include <asm/setup.h> @@ -40,11 +39,13 @@ #include <asm/mach/irq.h> #include "pxa25x.h" -#include <linux/platform_data/mmc-pxamci.h> #include "udc.h" +#include "poodle.h" + +#include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/irda-pxaficp.h> -#include <mach/poodle.h> #include <linux/platform_data/video-pxafb.h> +#include <linux/platform_data/asoc-poodle.h> #include <asm/hardware/scoop.h> #include <asm/hardware/locomo.h> @@ -156,12 +157,6 @@ static struct scoop_pcmcia_config poodle_pcmcia_config = { EXPORT_SYMBOL(poodle_scoop_device); - -static struct platform_device poodle_audio_device = { - .name = "poodle-audio", - .id = -1, -}; - /* LoCoMo device */ static struct resource locomo_resources[] = { [0] = { @@ -180,7 +175,7 @@ static struct locomo_platform_data locomo_info = { .irq_base = IRQ_BOARD_START, }; -struct platform_device poodle_locomo_device = { +static struct platform_device poodle_locomo_device = { .name = "locomo", .id = 0, .num_resources = ARRAY_SIZE(locomo_resources), @@ -190,7 +185,21 @@ struct platform_device poodle_locomo_device = { }, }; -EXPORT_SYMBOL(poodle_locomo_device); +static struct poodle_audio_platform_data poodle_audio_pdata = { + .locomo_dev = &poodle_locomo_device.dev, + + .gpio_amp_on = POODLE_LOCOMO_GPIO_AMP_ON, + .gpio_mute_l = POODLE_LOCOMO_GPIO_MUTE_L, + .gpio_mute_r = POODLE_LOCOMO_GPIO_MUTE_R, + .gpio_232vcc_on = POODLE_LOCOMO_GPIO_232VCC_ON, + .gpio_jk_b = POODLE_LOCOMO_GPIO_JK_B, +}; + +static struct platform_device poodle_audio_device = { + .name = "poodle-audio", + .id = -1, + .dev.platform_data = &poodle_audio_pdata, +}; #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) static struct pxa2xx_spi_controller poodle_spi_info = { diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/poodle.h index b56b19351a03..00798b44f204 100644 --- a/arch/arm/mach-pxa/include/mach/poodle.h +++ b/arch/arm/mach-pxa/poodle.h @@ -89,6 +89,4 @@ #define POODLE_NR_IRQS (IRQ_BOARD_START + 4) /* 4 for LoCoMo */ -extern struct platform_device poodle_locomo_device; - #endif /* __ASM_ARCH_POODLE_H */ diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c index d32d5c8e966f..5e5d543fdf46 100644 --- a/arch/arm/mach-pxa/pxa-dt.c +++ b/arch/arm/mach-pxa/pxa-dt.c @@ -11,7 +11,7 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/irqs.h> +#include "irqs.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/pxa-regs.h b/arch/arm/mach-pxa/pxa-regs.h new file mode 100644 index 000000000000..ba5120c06b8a --- /dev/null +++ b/arch/arm/mach-pxa/pxa-regs.h @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Author: Nicolas Pitre + * Created: Jun 15, 2001 + * Copyright: MontaVista Software Inc. + */ +#ifndef __ASM_MACH_PXA_REGS_H +#define __ASM_MACH_PXA_REGS_H + +/* + * Workarounds for at least 2 errata so far require this. + * The mapping is set in mach-pxa/generic.c. + */ +#define UNCACHED_PHYS_0 0xfe000000 +#define UNCACHED_PHYS_0_SIZE 0x00100000 + +/* + * Intel PXA2xx internal register mapping: + * + * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff + * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff + * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff + * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff + * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff + * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff + * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff + * + * Note that not all PXA2xx chips implement all those addresses, and the + * kernel only maps the minimum needed range of this mapping. + */ +#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1)) +#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) + +#ifndef __ASSEMBLY__ +# define __REG(x) (*((volatile u32 __iomem *)io_p2v(x))) + +/* With indexed regs we don't want to feed the index through io_p2v() + especially if it is a variable, otherwise horrible code will result. */ +# define __REG2(x,y) \ + (*(volatile u32 __iomem*)((u32)&__REG(x) + (y))) + +# define __PREG(x) (io_v2p((u32)&(x))) + +#else + +# define __REG(x) io_p2v(x) +# define __PREG(x) io_v2p(x) + +#endif + + +#endif diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 678641ab46e5..6b34d7c169ea 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -26,16 +26,16 @@ #include <linux/irq.h> #include <linux/irqchip.h> #include <linux/platform_data/mmp_dma.h> +#include <linux/soc/pxa/cpu.h> #include <asm/mach/map.h> #include <asm/suspend.h> -#include <mach/hardware.h> -#include <mach/irqs.h> +#include "irqs.h" #include "pxa25x.h" -#include <mach/reset.h> +#include "reset.h" #include "pm.h" -#include <mach/dma.h> -#include <mach/smemc.h> +#include "addr-map.h" +#include "smemc.h" #include "generic.h" #include "devices.h" @@ -240,7 +240,7 @@ static int __init pxa25x_init(void) if (cpu_is_pxa25x()) { - reset_status = RCSR; + pxa_register_wdt(RCSR); pxa25x_init_pm(); diff --git a/arch/arm/mach-pxa/pxa25x.h b/arch/arm/mach-pxa/pxa25x.h index b58d0fbdb4db..eaaa87666324 100644 --- a/arch/arm/mach-pxa/pxa25x.h +++ b/arch/arm/mach-pxa/pxa25x.h @@ -2,9 +2,9 @@ #ifndef __MACH_PXA25x_H #define __MACH_PXA25x_H -#include <mach/hardware.h> -#include <mach/pxa2xx-regs.h> +#include "addr-map.h" +#include "pxa2xx-regs.h" #include "mfp-pxa25x.h" -#include <mach/irqs.h> +#include "irqs.h" #endif /* __MACH_PXA25x_H */ diff --git a/arch/arm/mach-pxa/pxa27x-udc.h b/arch/arm/mach-pxa/pxa27x-udc.h index faf73804697f..2d3df3b1cb68 100644 --- a/arch/arm/mach-pxa/pxa27x-udc.h +++ b/arch/arm/mach-pxa/pxa27x-udc.h @@ -2,6 +2,8 @@ #ifndef _ASM_ARCH_PXA27X_UDC_H #define _ASM_ARCH_PXA27X_UDC_H +#include "pxa-regs.h" + #ifdef _ASM_ARCH_PXA25X_UDC_H #error You cannot include both PXA25x and PXA27x UDC support #endif diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index f0ba7ed24cb6..afbf6ace954f 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -23,18 +23,18 @@ #include <linux/irq.h> #include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/mmp_dma.h> +#include <linux/soc/pxa/cpu.h> #include <asm/mach/map.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/suspend.h> -#include <mach/irqs.h> +#include "irqs.h" #include "pxa27x.h" -#include <mach/reset.h> +#include "reset.h" #include <linux/platform_data/usb-ohci-pxa27x.h> #include "pm.h" -#include <mach/dma.h> -#include <mach/smemc.h> +#include "addr-map.h" +#include "smemc.h" #include "generic.h" #include "devices.h" @@ -337,7 +337,7 @@ static int __init pxa27x_init(void) if (cpu_is_pxa27x()) { - reset_status = RCSR; + pxa_register_wdt(RCSR); pxa27x_init_pm(); diff --git a/arch/arm/mach-pxa/pxa27x.h b/arch/arm/mach-pxa/pxa27x.h index abdc02fb4f03..ede96f3f7214 100644 --- a/arch/arm/mach-pxa/pxa27x.h +++ b/arch/arm/mach-pxa/pxa27x.h @@ -3,10 +3,10 @@ #define __MACH_PXA27x_H #include <linux/suspend.h> -#include <mach/hardware.h> -#include <mach/pxa2xx-regs.h> +#include "addr-map.h" +#include "pxa2xx-regs.h" #include "mfp-pxa27x.h" -#include <mach/irqs.h> +#include "irqs.h" #define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/pxa2xx-regs.h index fa121e135915..0b7eaf6b5813 100644 --- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h +++ b/arch/arm/mach-pxa/pxa2xx-regs.h @@ -11,7 +11,7 @@ #ifndef __PXA2XX_REGS_H #define __PXA2XX_REGS_H -#include <mach/hardware.h> +#include "pxa-regs.h" /* * Power Manager @@ -136,51 +136,6 @@ #define CKEN io_p2v(0x41300004) /* Clock Enable Register */ #define OSCC io_p2v(0x41300008) /* Oscillator Configuration Register */ -#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ -#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ -#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ - -#define CCCR_CPDIS_BIT (31) -#define CCCR_PPDIS_BIT (30) -#define CCCR_LCD_26_BIT (27) -#define CCCR_A_BIT (25) - -#define CCSR_N2_MASK CCCR_N_MASK -#define CCSR_M_MASK CCCR_M_MASK -#define CCSR_L_MASK CCCR_L_MASK -#define CCSR_N2_SHIFT 7 - -#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */ -#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */ -#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */ -#define CKEN_MEMC (22) /* Memory Controller Clock Enable */ -#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */ -#define CKEN_IM (20) /* Internal Memory Clock Enable */ -#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */ -#define CKEN_USIM (18) /* USIM Unit Clock Enable */ -#define CKEN_MSL (17) /* MSL Unit Clock Enable */ -#define CKEN_LCD (16) /* LCD Unit Clock Enable */ -#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */ -#define CKEN_I2C (14) /* I2C Unit Clock Enable */ -#define CKEN_FICP (13) /* FICP Unit Clock Enable */ -#define CKEN_MMC (12) /* MMC Unit Clock Enable */ -#define CKEN_USB (11) /* USB Unit Clock Enable */ -#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */ -#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */ -#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */ -#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */ -#define CKEN_I2S (8) /* I2S Unit Clock Enable */ -#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */ -#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */ -#define CKEN_STUART (5) /* STUART Unit Clock Enable */ -#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */ -#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */ -#define CKEN_SSP (3) /* SSP Unit Clock Enable */ -#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */ -#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */ -#define CKEN_PWM1 (1) /* PWM1 Clock Enable */ -#define CKEN_PWM0 (0) /* PWM0 Clock Enable */ - #define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ #define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c index 2d26cd2afbf3..4aafd692c1e8 100644 --- a/arch/arm/mach-pxa/pxa2xx.c +++ b/arch/arm/mach-pxa/pxa2xx.c @@ -12,10 +12,12 @@ #include <linux/device.h> #include <linux/io.h> -#include <mach/hardware.h> -#include <mach/pxa2xx-regs.h> +#include "pxa2xx-regs.h" #include "mfp-pxa25x.h" -#include <mach/reset.h> +#include "generic.h" +#include "reset.h" +#include "smemc.h" +#include <linux/soc/pxa/smemc.h> #include <linux/platform_data/irda-pxaficp.h> void pxa2xx_clear_reset_status(unsigned int mask) @@ -51,3 +53,27 @@ void pxa2xx_transceiver_mode(struct device *dev, int mode) BUG(); } EXPORT_SYMBOL_GPL(pxa2xx_transceiver_mode); + +#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3) +#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3) + +int pxa2xx_smemc_get_sdram_rows(void) +{ + static int sdram_rows; + unsigned int drac2 = 0, drac0 = 0; + u32 mdcnfg; + + if (sdram_rows) + return sdram_rows; + + mdcnfg = readl_relaxed(MDCNFG); + + if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3)) + drac2 = MDCNFG_DRAC2(mdcnfg); + + if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1)) + drac0 = MDCNFG_DRAC0(mdcnfg); + + sdram_rows = 1 << (11 + max(drac0, drac2)); + return sdram_rows; +} diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c index 7f2f5a6a2263..f77ec118d5b9 100644 --- a/arch/arm/mach-pxa/pxa300.c +++ b/arch/arm/mach-pxa/pxa300.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/soc/pxa/cpu.h> #include "pxa300.h" diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index 78abcc741df7..e372e6c118de 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/soc/pxa/cpu.h> #include "pxa320.h" diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/pxa3xx-regs.h index 070f6c74196e..4b11cf81a9e6 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/pxa3xx-regs.h @@ -10,7 +10,7 @@ #ifndef __ASM_ARCH_PXA3XX_REGS_H #define __ASM_ARCH_PXA3XX_REGS_H -#include <mach/hardware.h> +#include "pxa-regs.h" /* * Oscillator Configuration Register (OSCC) @@ -131,73 +131,4 @@ #define CKENC __REG(0x41340024) /* C Clock Enable Register */ #define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */ -#define ACCR_XPDIS (1 << 31) /* Core PLL Output Disable */ -#define ACCR_SPDIS (1 << 30) /* System PLL Output Disable */ -#define ACCR_D0CS (1 << 26) /* D0 Mode Clock Select */ -#define ACCR_PCCE (1 << 11) /* Power Mode Change Clock Enable */ -#define ACCR_DDR_D0CS (1 << 7) /* DDR SDRAM clock frequency in D0CS (PXA31x only) */ - -#define ACCR_SMCFS_MASK (0x7 << 23) /* Static Memory Controller Frequency Select */ -#define ACCR_SFLFS_MASK (0x3 << 18) /* Frequency Select for Internal Memory Controller */ -#define ACCR_XSPCLK_MASK (0x3 << 16) /* Core Frequency during Frequency Change */ -#define ACCR_HSS_MASK (0x3 << 14) /* System Bus-Clock Frequency Select */ -#define ACCR_DMCFS_MASK (0x3 << 12) /* Dynamic Memory Controller Clock Frequency Select */ -#define ACCR_XN_MASK (0x7 << 8) /* Core PLL Turbo-Mode-to-Run-Mode Ratio */ -#define ACCR_XL_MASK (0x1f) /* Core PLL Run-Mode-to-Oscillator Ratio */ - -#define ACCR_SMCFS(x) (((x) & 0x7) << 23) -#define ACCR_SFLFS(x) (((x) & 0x3) << 18) -#define ACCR_XSPCLK(x) (((x) & 0x3) << 16) -#define ACCR_HSS(x) (((x) & 0x3) << 14) -#define ACCR_DMCFS(x) (((x) & 0x3) << 12) -#define ACCR_XN(x) (((x) & 0x7) << 8) -#define ACCR_XL(x) ((x) & 0x1f) - -/* - * Clock Enable Bit - */ -#define CKEN_LCD 1 /* < LCD Clock Enable */ -#define CKEN_USBH 2 /* < USB host clock enable */ -#define CKEN_CAMERA 3 /* < Camera interface clock enable */ -#define CKEN_NAND 4 /* < NAND Flash Controller Clock Enable */ -#define CKEN_USB2 6 /* < USB 2.0 client clock enable. */ -#define CKEN_DMC 8 /* < Dynamic Memory Controller clock enable */ -#define CKEN_SMC 9 /* < Static Memory Controller clock enable */ -#define CKEN_ISC 10 /* < Internal SRAM Controller clock enable */ -#define CKEN_BOOT 11 /* < Boot rom clock enable */ -#define CKEN_MMC1 12 /* < MMC1 Clock enable */ -#define CKEN_MMC2 13 /* < MMC2 clock enable */ -#define CKEN_KEYPAD 14 /* < Keypand Controller Clock Enable */ -#define CKEN_CIR 15 /* < Consumer IR Clock Enable */ -#define CKEN_USIM0 17 /* < USIM[0] Clock Enable */ -#define CKEN_USIM1 18 /* < USIM[1] Clock Enable */ -#define CKEN_TPM 19 /* < TPM clock enable */ -#define CKEN_UDC 20 /* < UDC clock enable */ -#define CKEN_BTUART 21 /* < BTUART clock enable */ -#define CKEN_FFUART 22 /* < FFUART clock enable */ -#define CKEN_STUART 23 /* < STUART clock enable */ -#define CKEN_AC97 24 /* < AC97 clock enable */ -#define CKEN_TOUCH 25 /* < Touch screen Interface Clock Enable */ -#define CKEN_SSP1 26 /* < SSP1 clock enable */ -#define CKEN_SSP2 27 /* < SSP2 clock enable */ -#define CKEN_SSP3 28 /* < SSP3 clock enable */ -#define CKEN_SSP4 29 /* < SSP4 clock enable */ -#define CKEN_MSL0 30 /* < MSL0 clock enable */ -#define CKEN_PWM0 32 /* < PWM[0] clock enable */ -#define CKEN_PWM1 33 /* < PWM[1] clock enable */ -#define CKEN_I2C 36 /* < I2C clock enable */ -#define CKEN_INTC 38 /* < Interrupt controller clock enable */ -#define CKEN_GPIO 39 /* < GPIO clock enable */ -#define CKEN_1WIRE 40 /* < 1-wire clock enable */ -#define CKEN_HSIO2 41 /* < HSIO2 clock enable */ -#define CKEN_MINI_IM 48 /* < Mini-IM */ -#define CKEN_MINI_LCD 49 /* < Mini LCD */ - -#define CKEN_MMC3 5 /* < MMC3 Clock Enable */ -#define CKEN_MVED 43 /* < MVED clock enable */ - -/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */ -#define CKEN_PXA300_GCU 42 /* Graphics controller clock enable */ -#define CKEN_PXA320_GCU 7 /* Graphics controller clock enable */ - #endif /* __ASM_ARCH_PXA3XX_REGS_H */ diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c index 4bd7da1f8657..c29a7f0fa1b0 100644 --- a/arch/arm/mach-pxa/pxa3xx-ulpi.c +++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c @@ -21,8 +21,8 @@ #include <linux/clk.h> #include <linux/usb.h> #include <linux/usb/otg.h> +#include <linux/soc/pxa/cpu.h> -#include <mach/hardware.h> #include "regs-u2d.h" #include <linux/platform_data/usb-pxa3xx-ulpi.h> diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 560160682df6..979642aa7ffe 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -24,17 +24,18 @@ #include <linux/syscore_ops.h> #include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/mmp_dma.h> +#include <linux/soc/pxa/cpu.h> +#include <linux/clk/pxa.h> #include <asm/mach/map.h> #include <asm/suspend.h> -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> -#include <mach/reset.h> +#include "pxa3xx-regs.h" +#include "reset.h" #include <linux/platform_data/usb-ohci-pxa27x.h> #include "pm.h" -#include <mach/dma.h> -#include <mach/smemc.h> -#include <mach/irqs.h> +#include "addr-map.h" +#include "smemc.h" +#include "irqs.h" #include "generic.h" #include "devices.h" @@ -51,6 +52,10 @@ extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int)); #define NDCR_ND_ARB_EN (1 << 12) #define NDCR_ND_ARB_CNTL (1 << 19) +#define CKEN_BOOT 11 /* < Boot rom clock enable */ +#define CKEN_TPM 19 /* < TPM clock enable */ +#define CKEN_HSIO2 41 /* < HSIO2 clock enable */ + #ifdef CONFIG_PM #define ISRAM_START 0x5c000000 @@ -463,7 +468,7 @@ static int __init pxa3xx_init(void) if (cpu_is_pxa3xx()) { - reset_status = ARSR; + pxa_register_wdt(ARSR); /* * clear RDH bit every time after reset diff --git a/arch/arm/mach-pxa/pxa3xx.h b/arch/arm/mach-pxa/pxa3xx.h index 6d4502aa9d06..81825f7ad258 100644 --- a/arch/arm/mach-pxa/pxa3xx.h +++ b/arch/arm/mach-pxa/pxa3xx.h @@ -2,8 +2,8 @@ #ifndef __MACH_PXA3XX_H #define __MACH_PXA3XX_H -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> -#include <mach/irqs.h> +#include "addr-map.h" +#include "pxa3xx-regs.h" +#include "irqs.h" #endif /* __MACH_PXA3XX_H */ diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c index bf91de4267e5..b9021a40cbd1 100644 --- a/arch/arm/mach-pxa/pxa930.c +++ b/arch/arm/mach-pxa/pxa930.c @@ -13,6 +13,7 @@ #include <linux/irq.h> #include <linux/gpio-pxa.h> #include <linux/platform_device.h> +#include <linux/soc/pxa/cpu.h> #include "pxa930.h" diff --git a/arch/arm/mach-pxa/include/mach/regs-ost.h b/arch/arm/mach-pxa/regs-ost.h index deb564ed8ee7..c8001cfc8d6b 100644 --- a/arch/arm/mach-pxa/include/mach/regs-ost.h +++ b/arch/arm/mach-pxa/regs-ost.h @@ -2,11 +2,13 @@ #ifndef __ASM_MACH_REGS_OST_H #define __ASM_MACH_REGS_OST_H -#include <mach/hardware.h> +#include "pxa-regs.h" /* * OS Timer & Match Registers */ +#define OST_PHYS 0x40A00000 +#define OST_LEN 0x00000020 #define OSMR0 io_p2v(0x40A00000) /* */ #define OSMR1 io_p2v(0x40A00004) /* */ diff --git a/arch/arm/mach-pxa/regs-rtc.h b/arch/arm/mach-pxa/regs-rtc.h index b1f9ff14e335..96255a0f595e 100644 --- a/arch/arm/mach-pxa/regs-rtc.h +++ b/arch/arm/mach-pxa/regs-rtc.h @@ -2,7 +2,7 @@ #ifndef __ASM_MACH_REGS_RTC_H #define __ASM_MACH_REGS_RTC_H -#include <mach/hardware.h> +#include "pxa-regs.h" /* * Real Time Clock diff --git a/arch/arm/mach-pxa/regs-u2d.h b/arch/arm/mach-pxa/regs-u2d.h index fe4c80ad87ec..ab517ba62c9a 100644 --- a/arch/arm/mach-pxa/regs-u2d.h +++ b/arch/arm/mach-pxa/regs-u2d.h @@ -2,8 +2,6 @@ #ifndef __ASM_ARCH_PXA3xx_U2D_H #define __ASM_ARCH_PXA3xx_U2D_H -#include <mach/bitfield.h> - /* * USB2 device controller registers and bits definitions */ diff --git a/arch/arm/mach-pxa/include/mach/regs-uart.h b/arch/arm/mach-pxa/regs-uart.h index 9a168f83afeb..490e9ca16297 100644 --- a/arch/arm/mach-pxa/include/mach/regs-uart.h +++ b/arch/arm/mach-pxa/regs-uart.h @@ -2,6 +2,8 @@ #ifndef __ASM_ARCH_REGS_UART_H #define __ASM_ARCH_REGS_UART_H +#include "pxa-regs.h" + /* * UARTs */ diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index af78405aa4e9..f0be90573ad3 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -7,12 +7,9 @@ #include <asm/proc-fns.h> #include <asm/system_misc.h> -#include <mach/regs-ost.h> -#include <mach/reset.h> -#include <mach/smemc.h> - -unsigned int reset_status; -EXPORT_SYMBOL(reset_status); +#include "regs-ost.h" +#include "reset.h" +#include "smemc.h" static void do_hw_reset(void); diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/reset.h index e1c4d100fd45..963dd190bc13 100644 --- a/arch/arm/mach-pxa/include/mach/reset.h +++ b/arch/arm/mach-pxa/reset.h @@ -8,8 +8,8 @@ #define RESET_STATUS_GPIO (1 << 3) /* GPIO Reset */ #define RESET_STATUS_ALL (0xf) -extern unsigned int reset_status; extern void clear_reset_status(unsigned int mask); +extern void pxa_register_wdt(unsigned int reset_status); /** * init_gpio_reset() - register GPIO as reset generator diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 83cfbb882a2d..a829baf8d922 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -24,7 +24,7 @@ #include <asm/mach-types.h> #include "pm.h" -#include <mach/pxa2xx-regs.h> +#include "pxa2xx-regs.h" #include "regs-rtc.h" #include "sharpsl_pm.h" diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index 6c5b3ffd2cd3..d58cf52e3848 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -13,13 +13,14 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <mach/hardware.h> -#include <mach/smemc.h> -#include <mach/pxa2xx-regs.h> +#include "smemc.h" +#include "pxa2xx-regs.h" #define MDREFR_KDIV 0x200a4000 // all banks #define CCCR_SLEEP 0x00000107 // L=7 2N=2 A=0 PPDIS=0 CPDIS=0 - +#define CCCR_N_MASK 0x00000380 +#define CCCR_M_MASK 0x00000060 +#define CCCR_L_MASK 0x0000001f .text #ifdef CONFIG_PXA3xx diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c index 32e82cc92ea5..2d2a321d82f8 100644 --- a/arch/arm/mach-pxa/smemc.c +++ b/arch/arm/mach-pxa/smemc.c @@ -8,9 +8,10 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/syscore_ops.h> +#include <linux/soc/pxa/cpu.h> -#include <mach/hardware.h> -#include <mach/smemc.h> +#include "smemc.h" +#include <linux/soc/pxa/smemc.h> #ifdef CONFIG_PM static unsigned long msc[2]; @@ -70,3 +71,11 @@ static int __init smemc_init(void) } subsys_initcall(smemc_init); #endif + +static const unsigned int df_clkdiv[4] = { 1, 2, 4, 1 }; +unsigned int pxa3xx_smemc_get_memclkdiv(void) +{ + unsigned long memclkcfg = __raw_readl(MEMCLKCFG); + + return df_clkdiv[(memclkcfg >> 16) & 0x3]; +} diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/smemc.h index 9b2453a7ab23..9b2453a7ab23 100644 --- a/arch/arm/mach-pxa/include/mach/smemc.h +++ b/arch/arm/mach-pxa/smemc.h diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index a648e7094e84..dd88953adc9d 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -39,14 +39,14 @@ #include "pxa27x.h" #include "pxa27x-udc.h" -#include <mach/reset.h> +#include "reset.h" #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/video-pxafb.h> -#include <mach/spitz.h> +#include "spitz.h" #include "sharpsl_pm.h" -#include <mach/smemc.h> +#include "smemc.h" #include "generic.h" #include "devices.h" @@ -962,11 +962,42 @@ static void __init spitz_i2c_init(void) static inline void spitz_i2c_init(void) {} #endif +static struct gpiod_lookup_table spitz_audio_gpio_table = { + .dev_id = "spitz-audio", + .table = { + GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE, + "mute-l", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE, + "mute-r", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sharp-scoop.1", SPITZ_GPIO_MIC_BIAS - SPITZ_SCP2_GPIO_BASE, + "mic", GPIO_ACTIVE_HIGH), + { }, + }, +}; + +static struct gpiod_lookup_table akita_audio_gpio_table = { + .dev_id = "spitz-audio", + .table = { + GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE, + "mute-l", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE, + "mute-r", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("i2c-max7310", AKITA_GPIO_MIC_BIAS - AKITA_IOEXP_GPIO_BASE, + "mic", GPIO_ACTIVE_HIGH), + { }, + }, +}; + /****************************************************************************** * Audio devices ******************************************************************************/ static inline void spitz_audio_init(void) { + if (machine_is_akita()) + gpiod_add_lookup_table(&akita_audio_gpio_table); + else + gpiod_add_lookup_table(&spitz_audio_gpio_table); + platform_device_register_simple("spitz-audio", -1, NULL, 0); } diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/spitz.h index 04828d8918aa..04828d8918aa 100644 --- a/arch/arm/mach-pxa/include/mach/spitz.h +++ b/arch/arm/mach-pxa/spitz.h diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 25a1f8c5a738..6689b67f9ce5 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -18,9 +18,8 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <mach/hardware.h> -#include <mach/spitz.h> +#include "spitz.h" #include "pxa27x.h" #include "sharpsl_pm.h" diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S index eab1645bb4ad..938310b708a0 100644 --- a/arch/arm/mach-pxa/standby.S +++ b/arch/arm/mach-pxa/standby.S @@ -11,9 +11,8 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <mach/hardware.h> -#include <mach/pxa2xx-regs.h> +#include "pxa2xx-regs.h" .text diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 431709725d02..6af8bc404825 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -40,16 +40,16 @@ #include <asm/mach-types.h> #include "pxa25x.h" -#include <mach/reset.h> +#include "reset.h" #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/mmc-pxamci.h> #include "udc.h" #include "tosa_bt.h" -#include <mach/audio.h> -#include <mach/smemc.h> +#include <linux/platform_data/asoc-pxa.h> +#include "smemc.h" #include <asm/mach/arch.h> -#include <mach/tosa.h> +#include "tosa.h" #include <asm/hardware/scoop.h> #include <asm/mach/sharpsl_param.h> @@ -296,9 +296,9 @@ static struct gpiod_lookup_table tosa_mci_gpio_table = { .table = { GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_nSD_DETECT, "cd", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_SD_WP, + GPIO_LOOKUP("sharp-scoop.0", TOSA_GPIO_SD_WP - TOSA_SCOOP_GPIO_BASE, "wp", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_PWR_ON, + GPIO_LOOKUP("sharp-scoop.0", TOSA_GPIO_PWR_ON - TOSA_SCOOP_GPIO_BASE, "power", GPIO_ACTIVE_HIGH), { }, }, @@ -616,6 +616,22 @@ static struct resource tc6393xb_resources[] = { }, }; +static struct gpiod_lookup_table tosa_battery_gpio_table = { + .dev_id = "wm97xx-battery", + .table = { + GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_BAT0_CRG, + "main battery full", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_BAT1_CRG, + "jacket battery full", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_BAT0_LOW, + "main battery low", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_BAT1_LOW, + "jacket battery low", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_JACKET_DETECT, + "jacket detect", GPIO_ACTIVE_HIGH), + { }, + }, +}; static int tosa_tc6393xb_enable(struct platform_device *dev) { @@ -709,31 +725,6 @@ static struct tmio_nand_data tosa_tc6393xb_nand_config = { .part_parsers = probes, }; -static int tosa_tc6393xb_setup(struct platform_device *dev) -{ - int rc; - - rc = gpio_request(TOSA_GPIO_CARD_VCC_ON, "CARD_VCC_ON"); - if (rc) - goto err_req; - - rc = gpio_direction_output(TOSA_GPIO_CARD_VCC_ON, 1); - if (rc) - goto err_dir; - - return rc; - -err_dir: - gpio_free(TOSA_GPIO_CARD_VCC_ON); -err_req: - return rc; -} - -static void tosa_tc6393xb_teardown(struct platform_device *dev) -{ - gpio_free(TOSA_GPIO_CARD_VCC_ON); -} - #ifdef CONFIG_MFD_TC6393XB static struct fb_videomode tosa_tc6393xb_lcd_mode[] = { { @@ -778,9 +769,6 @@ static struct tc6393xb_platform_data tosa_tc6393xb_data = { .scr_gper = 0x3300, .irq_base = IRQ_BOARD_START, - .gpio_base = TOSA_TC6393XB_GPIO_BASE, - .setup = tosa_tc6393xb_setup, - .teardown = tosa_tc6393xb_teardown, .enable = tosa_tc6393xb_enable, .disable = tosa_tc6393xb_disable, @@ -821,26 +809,6 @@ static struct pxa2xx_spi_controller pxa_ssp_master_info = { .num_chipselect = 1, }; -static struct gpiod_lookup_table tosa_lcd_gpio_table = { - .dev_id = "spi2.0", - .table = { - GPIO_LOOKUP("tc6393xb", - TOSA_GPIO_TG_ON - TOSA_TC6393XB_GPIO_BASE, - "tg #pwr", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct gpiod_lookup_table tosa_lcd_bl_gpio_table = { - .dev_id = "i2c-tosa-bl", - .table = { - GPIO_LOOKUP("tc6393xb", - TOSA_GPIO_BL_C20MA - TOSA_TC6393XB_GPIO_BASE, - "backlight", GPIO_ACTIVE_HIGH), - { }, - }, -}; - static struct spi_board_info spi_board_info[] __initdata = { { .modalias = "tosa-lcd", @@ -943,6 +911,8 @@ static void __init tosa_init(void) /* enable batt_fault */ PMCR = 0x01; + gpiod_add_lookup_table(&tosa_battery_gpio_table); + gpiod_add_lookup_table(&tosa_mci_gpio_table); pxa_set_mci_info(&tosa_mci_platform_data); pxa_set_ficp_info(&tosa_ficp_platform_data); @@ -951,8 +921,6 @@ static void __init tosa_init(void) platform_scoop_config = &tosa_pcmcia_config; pxa2xx_set_spi_info(2, &pxa_ssp_master_info); - gpiod_add_lookup_table(&tosa_lcd_gpio_table); - gpiod_add_lookup_table(&tosa_lcd_bl_gpio_table); spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL); diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/tosa.h index 8bfaca3a8b64..3b3efa0a0e22 100644 --- a/arch/arm/mach-pxa/include/mach/tosa.h +++ b/arch/arm/mach-pxa/tosa.h @@ -55,24 +55,6 @@ #define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL) /* - * TC6393XB GPIOs - */ -#define TOSA_TC6393XB_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 2 * 12) - -#define TOSA_GPIO_TG_ON (TOSA_TC6393XB_GPIO_BASE + 0) -#define TOSA_GPIO_L_MUTE (TOSA_TC6393XB_GPIO_BASE + 1) -#define TOSA_GPIO_BL_C20MA (TOSA_TC6393XB_GPIO_BASE + 3) -#define TOSA_GPIO_CARD_VCC_ON (TOSA_TC6393XB_GPIO_BASE + 4) -#define TOSA_GPIO_CHARGE_OFF (TOSA_TC6393XB_GPIO_BASE + 6) -#define TOSA_GPIO_CHARGE_OFF_JC (TOSA_TC6393XB_GPIO_BASE + 7) -#define TOSA_GPIO_BAT0_V_ON (TOSA_TC6393XB_GPIO_BASE + 9) -#define TOSA_GPIO_BAT1_V_ON (TOSA_TC6393XB_GPIO_BASE + 10) -#define TOSA_GPIO_BU_CHRG_ON (TOSA_TC6393XB_GPIO_BASE + 11) -#define TOSA_GPIO_BAT_SW_ON (TOSA_TC6393XB_GPIO_BASE + 12) -#define TOSA_GPIO_BAT0_TH_ON (TOSA_TC6393XB_GPIO_BASE + 14) -#define TOSA_GPIO_BAT1_TH_ON (TOSA_TC6393XB_GPIO_BASE + 15) - -/* * PXA GPIOs */ #define TOSA_GPIO_POWERON (0) diff --git a/arch/arm/mach-pxa/trizeps4-pcmcia.c b/arch/arm/mach-pxa/trizeps4-pcmcia.c new file mode 100644 index 000000000000..25e363770565 --- /dev/null +++ b/arch/arm/mach-pxa/trizeps4-pcmcia.c @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/pcmcia/pxa2xx_trizeps4.c + * + * TRIZEPS PCMCIA specific routines. + * + * Author: Jürgen Schindele + * Created: 20 02, 2006 + * Copyright: Jürgen Schindele + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include "pxa2xx-regs.h" +#include "trizeps4.h" + +#include <pcmcia/soc_common.h> + +extern void board_pcmcia_power(int power); + +static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + /* we dont have voltage/card/ready detection + * so we dont need interrupts for it + */ + switch (skt->nr) { + case 0: + skt->stat[SOC_STAT_CD].gpio = GPIO_PCD; + skt->stat[SOC_STAT_CD].name = "cs0_cd"; + skt->stat[SOC_STAT_RDY].gpio = GPIO_PRDY; + skt->stat[SOC_STAT_RDY].name = "cs0_rdy"; + break; + default: + break; + } + /* release the reset of this card */ + pr_debug("%s: sock %d irq %d\n", __func__, skt->nr, skt->socket.pci_irq); + + return 0; +} + +static unsigned long trizeps_pcmcia_status[2]; + +static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + unsigned short status = 0, change; + status = CFSR_readw(); + change = (status ^ trizeps_pcmcia_status[skt->nr]) & + ConXS_CFSR_BVD_MASK; + if (change) { + trizeps_pcmcia_status[skt->nr] = status; + if (status & ConXS_CFSR_BVD1) { + /* enable_irq empty */ + } else { + /* disable_irq empty */ + } + } + + switch (skt->nr) { + case 0: + /* just fill in fix states */ + state->bvd1 = (status & ConXS_CFSR_BVD1) ? 1 : 0; + state->bvd2 = (status & ConXS_CFSR_BVD2) ? 1 : 0; + state->vs_3v = (status & ConXS_CFSR_VS1) ? 0 : 1; + state->vs_Xv = (status & ConXS_CFSR_VS2) ? 0 : 1; + break; + +#ifndef CONFIG_MACH_TRIZEPS_CONXS + /* on ConXS we only have one slot. Second is inactive */ + case 1: + state->detect = 0; + state->ready = 0; + state->bvd1 = 0; + state->bvd2 = 0; + state->vs_3v = 0; + state->vs_Xv = 0; + break; + +#endif + } +} + +static int trizeps_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + int ret = 0; + unsigned short power = 0; + + /* we do nothing here just check a bit */ + switch (state->Vcc) { + case 0: power &= 0xfc; break; + case 33: power |= ConXS_BCR_S0_VCC_3V3; break; + case 50: + pr_err("%s(): Vcc 5V not supported in socket\n", __func__); + break; + default: + pr_err("%s(): bad Vcc %u\n", __func__, state->Vcc); + ret = -1; + } + + switch (state->Vpp) { + case 0: power &= 0xf3; break; + case 33: power |= ConXS_BCR_S0_VPP_3V3; break; + case 120: + pr_err("%s(): Vpp 12V not supported in socket\n", __func__); + break; + default: + if (state->Vpp != state->Vcc) { + pr_err("%s(): bad Vpp %u\n", __func__, state->Vpp); + ret = -1; + } + } + + switch (skt->nr) { + case 0: /* we only have 3.3V */ + board_pcmcia_power(power); + break; + +#ifndef CONFIG_MACH_TRIZEPS_CONXS + /* on ConXS we only have one slot. Second is inactive */ + case 1: +#endif + default: + break; + } + + return ret; +} + +static void trizeps_pcmcia_socket_init(struct soc_pcmcia_socket *skt) +{ + /* default is on */ + board_pcmcia_power(0x9); +} + +static void trizeps_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) +{ + board_pcmcia_power(0x0); +} + +static struct pcmcia_low_level trizeps_pcmcia_ops = { + .owner = THIS_MODULE, + .hw_init = trizeps_pcmcia_hw_init, + .socket_state = trizeps_pcmcia_socket_state, + .configure_socket = trizeps_pcmcia_configure_socket, + .socket_init = trizeps_pcmcia_socket_init, + .socket_suspend = trizeps_pcmcia_socket_suspend, +#ifdef CONFIG_MACH_TRIZEPS_CONXS + .nr = 1, +#else + .nr = 2, +#endif + .first = 0, +}; + +static struct platform_device *trizeps_pcmcia_device; + +static int __init trizeps_pcmcia_init(void) +{ + int ret; + + if (!machine_is_trizeps4() && !machine_is_trizeps4wl()) + return -ENODEV; + + trizeps_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!trizeps_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(trizeps_pcmcia_device, + &trizeps_pcmcia_ops, sizeof(trizeps_pcmcia_ops)); + + if (ret == 0) + ret = platform_device_add(trizeps_pcmcia_device); + + if (ret) + platform_device_put(trizeps_pcmcia_device); + + return ret; +} + +static void __exit trizeps_pcmcia_exit(void) +{ + platform_device_unregister(trizeps_pcmcia_device); +} + +fs_initcall(trizeps_pcmcia_init); +module_exit(trizeps_pcmcia_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Juergen Schindele"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index f76f8be09554..716cce885379 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -40,13 +40,13 @@ #include <asm/mach/flash.h> #include "pxa27x.h" -#include <mach/trizeps4.h> -#include <mach/audio.h> +#include "trizeps4.h" +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/smemc.h> +#include "smemc.h" #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/trizeps4.h index 3cddb1428c5e..b6c19d155ef9 100644 --- a/arch/arm/mach-pxa/include/mach/trizeps4.h +++ b/arch/arm/mach-pxa/trizeps4.h @@ -11,6 +11,7 @@ #ifndef _TRIPEPS4_H_ #define _TRIPEPS4_H_ +#include "addr-map.h" #include "irqs.h" /* PXA_GPIO_TO_IRQ */ /* physical memory regions */ diff --git a/arch/arm/mach-pxa/viper-pcmcia.c b/arch/arm/mach-pxa/viper-pcmcia.c new file mode 100644 index 000000000000..26599dcc49b3 --- /dev/null +++ b/arch/arm/mach-pxa/viper-pcmcia.c @@ -0,0 +1,180 @@ +/* + * Viper/Zeus PCMCIA support + * Copyright 2004 Arcom Control Systems + * + * Maintained by Marc Zyngier <maz@misterjones.org> + * + * Based on: + * iPAQ h2200 PCMCIA support + * Copyright 2004 Koen Kooi <koen@vestingbar.nl> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <pcmcia/ss.h> +#include <pcmcia/soc_common.h> + +#include <asm/irq.h> + +#include "viper-pcmcia.h" + +static struct platform_device *arcom_pcmcia_dev; + +static inline struct arcom_pcmcia_pdata *viper_get_pdata(void) +{ + return arcom_pcmcia_dev->dev.platform_data; +} + +static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + struct arcom_pcmcia_pdata *pdata = viper_get_pdata(); + unsigned long flags; + + skt->stat[SOC_STAT_CD].gpio = pdata->cd_gpio; + skt->stat[SOC_STAT_CD].name = "PCMCIA_CD"; + skt->stat[SOC_STAT_RDY].gpio = pdata->rdy_gpio; + skt->stat[SOC_STAT_RDY].name = "CF ready"; + + if (gpio_request(pdata->pwr_gpio, "CF power")) + goto err_request_pwr; + + local_irq_save(flags); + + if (gpio_direction_output(pdata->pwr_gpio, 0)) { + local_irq_restore(flags); + goto err_dir; + } + + local_irq_restore(flags); + + return 0; + +err_dir: + gpio_free(pdata->pwr_gpio); +err_request_pwr: + dev_err(&arcom_pcmcia_dev->dev, "Failed to setup PCMCIA GPIOs\n"); + return -1; +} + +/* + * Release all resources. + */ +static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + struct arcom_pcmcia_pdata *pdata = viper_get_pdata(); + + gpio_free(pdata->pwr_gpio); +} + +static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + state->vs_3v = 1; /* Can only apply 3.3V */ + state->vs_Xv = 0; +} + +static int viper_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + struct arcom_pcmcia_pdata *pdata = viper_get_pdata(); + + /* Silently ignore Vpp, output enable, speaker enable. */ + pdata->reset(state->flags & SS_RESET); + + /* Apply socket voltage */ + switch (state->Vcc) { + case 0: + gpio_set_value(pdata->pwr_gpio, 0); + break; + case 33: + gpio_set_value(pdata->pwr_gpio, 1); + break; + default: + dev_err(&arcom_pcmcia_dev->dev, "Unsupported Vcc:%d\n", state->Vcc); + return -1; + } + + return 0; +} + +static struct pcmcia_low_level viper_pcmcia_ops = { + .owner = THIS_MODULE, + .hw_init = viper_pcmcia_hw_init, + .hw_shutdown = viper_pcmcia_hw_shutdown, + .socket_state = viper_pcmcia_socket_state, + .configure_socket = viper_pcmcia_configure_socket, + .nr = 1, +}; + +static struct platform_device *viper_pcmcia_device; + +static int viper_pcmcia_probe(struct platform_device *pdev) +{ + int ret; + + /* I can't imagine more than one device, but you never know... */ + if (arcom_pcmcia_dev) + return -EEXIST; + + if (!pdev->dev.platform_data) + return -EINVAL; + + viper_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!viper_pcmcia_device) + return -ENOMEM; + + arcom_pcmcia_dev = pdev; + + viper_pcmcia_device->dev.parent = &pdev->dev; + + ret = platform_device_add_data(viper_pcmcia_device, + &viper_pcmcia_ops, + sizeof(viper_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(viper_pcmcia_device); + + if (ret) { + platform_device_put(viper_pcmcia_device); + arcom_pcmcia_dev = NULL; + } + + return ret; +} + +static int viper_pcmcia_remove(struct platform_device *pdev) +{ + platform_device_unregister(viper_pcmcia_device); + arcom_pcmcia_dev = NULL; + return 0; +} + +static struct platform_device_id viper_pcmcia_id_table[] = { + { .name = "viper-pcmcia", }, + { .name = "zeus-pcmcia", }, + { }, +}; + +static struct platform_driver viper_pcmcia_driver = { + .probe = viper_pcmcia_probe, + .remove = viper_pcmcia_remove, + .driver = { + .name = "arcom-pcmcia", + }, + .id_table = viper_pcmcia_id_table, +}; + +module_platform_driver(viper_pcmcia_driver); + +MODULE_DEVICE_TABLE(platform, viper_pcmcia_id_table); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/viper-pcmcia.h b/arch/arm/mach-pxa/viper-pcmcia.h new file mode 100644 index 000000000000..a23b58aff9e1 --- /dev/null +++ b/arch/arm/mach-pxa/viper-pcmcia.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ARCOM_PCMCIA_H +#define __ARCOM_PCMCIA_H + +struct arcom_pcmcia_pdata { + int cd_gpio; + int rdy_gpio; + int pwr_gpio; + void (*reset)(int state); +}; + +#endif diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 3aa34e9a15d3..5b43351ee840 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -46,10 +46,10 @@ #include <linux/syscore_ops.h> #include "pxa25x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> -#include <mach/regs-uart.h> -#include <linux/platform_data/pcmcia-pxa2xx_viper.h> +#include "regs-uart.h" +#include "viper-pcmcia.h" #include "viper.h" #include <asm/setup.h> @@ -851,7 +851,7 @@ static void __init viper_init_vcore_gpios(void) goto err_dir; /* c/should assume redboot set the correct level ??? */ - viper_set_core_cpu_voltage(get_clk_frequency_khz(0), 1); + viper_set_core_cpu_voltage(pxa25x_get_clk_frequency_khz(0), 1); return; @@ -998,6 +998,18 @@ static struct map_desc viper_io_desc[] __initdata = { .length = 0x00800000, .type = MT_DEVICE, }, + { + /* + * ISA I/O space mapping: + * - ports 0x0000-0x0fff are PC/104 + * - ports 0x10000-0x10fff are PCMCIA slot 1 + * - ports 0x11000-0x11fff are PC/104 + */ + .virtual = PCI_IO_VIRT_BASE, + .pfn = __phys_to_pfn(0x30000000), + .length = 0x1000, + .type = MT_DEVICE, + }, }; static void __init viper_map_io(void) diff --git a/arch/arm/mach-pxa/vpac270-pcmcia.c b/arch/arm/mach-pxa/vpac270-pcmcia.c new file mode 100644 index 000000000000..9fd990c8a5fb --- /dev/null +++ b/arch/arm/mach-pxa/vpac270-pcmcia.c @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/pcmcia/pxa2xx_vpac270.c + * + * Driver for Voipac PXA270 PCMCIA and CF sockets + * + * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com> + */ + +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> + +#include "vpac270.h" + +#include <pcmcia/soc_common.h> + +static struct gpio vpac270_pcmcia_gpios[] = { + { GPIO107_VPAC270_PCMCIA_PPEN, GPIOF_INIT_LOW, "PCMCIA PPEN" }, + { GPIO11_VPAC270_PCMCIA_RESET, GPIOF_INIT_LOW, "PCMCIA Reset" }, +}; + +static struct gpio vpac270_cf_gpios[] = { + { GPIO16_VPAC270_CF_RESET, GPIOF_INIT_LOW, "CF Reset" }, +}; + +static int vpac270_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + int ret; + + if (skt->nr == 0) { + ret = gpio_request_array(vpac270_pcmcia_gpios, + ARRAY_SIZE(vpac270_pcmcia_gpios)); + + skt->stat[SOC_STAT_CD].gpio = GPIO84_VPAC270_PCMCIA_CD; + skt->stat[SOC_STAT_CD].name = "PCMCIA CD"; + skt->stat[SOC_STAT_RDY].gpio = GPIO35_VPAC270_PCMCIA_RDY; + skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready"; + } else { + ret = gpio_request_array(vpac270_cf_gpios, + ARRAY_SIZE(vpac270_cf_gpios)); + + skt->stat[SOC_STAT_CD].gpio = GPIO17_VPAC270_CF_CD; + skt->stat[SOC_STAT_CD].name = "CF CD"; + skt->stat[SOC_STAT_RDY].gpio = GPIO12_VPAC270_CF_RDY; + skt->stat[SOC_STAT_RDY].name = "CF Ready"; + } + + return ret; +} + +static void vpac270_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + if (skt->nr == 0) + gpio_free_array(vpac270_pcmcia_gpios, + ARRAY_SIZE(vpac270_pcmcia_gpios)); + else + gpio_free_array(vpac270_cf_gpios, + ARRAY_SIZE(vpac270_cf_gpios)); +} + +static void vpac270_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + state->vs_3v = 1; + state->vs_Xv = 0; +} + +static int +vpac270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + if (skt->nr == 0) { + gpio_set_value(GPIO11_VPAC270_PCMCIA_RESET, + (state->flags & SS_RESET)); + gpio_set_value(GPIO107_VPAC270_PCMCIA_PPEN, + !(state->Vcc == 33 || state->Vcc == 50)); + } else { + gpio_set_value(GPIO16_VPAC270_CF_RESET, + (state->flags & SS_RESET)); + } + + return 0; +} + +static struct pcmcia_low_level vpac270_pcmcia_ops = { + .owner = THIS_MODULE, + + .first = 0, + .nr = 2, + + .hw_init = vpac270_pcmcia_hw_init, + .hw_shutdown = vpac270_pcmcia_hw_shutdown, + + .socket_state = vpac270_pcmcia_socket_state, + .configure_socket = vpac270_pcmcia_configure_socket, +}; + +static struct platform_device *vpac270_pcmcia_device; + +static int __init vpac270_pcmcia_init(void) +{ + int ret; + + if (!machine_is_vpac270()) + return -ENODEV; + + vpac270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!vpac270_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(vpac270_pcmcia_device, + &vpac270_pcmcia_ops, sizeof(vpac270_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(vpac270_pcmcia_device); + + if (ret) + platform_device_put(vpac270_pcmcia_device); + + return ret; +} + +static void __exit vpac270_pcmcia_exit(void) +{ + platform_device_unregister(vpac270_pcmcia_device); +} + +module_init(vpac270_pcmcia_init); +module_exit(vpac270_pcmcia_exit); + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("PCMCIA support for Voipac PXA270"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index 14505e83479e..8f74bafcf1f9 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -29,8 +29,8 @@ #include <asm/mach/arch.h> #include "pxa27x.h" -#include <mach/audio.h> -#include <mach/vpac270.h> +#include <linux/platform_data/asoc-pxa.h> +#include "vpac270.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/usb-ohci-pxa27x.h> diff --git a/arch/arm/mach-pxa/include/mach/vpac270.h b/arch/arm/mach-pxa/vpac270.h index 0cd094d8c553..0cd094d8c553 100644 --- a/arch/arm/mach-pxa/include/mach/vpac270.h +++ b/arch/arm/mach-pxa/vpac270.h diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index f485146b899f..6bb02b65fb82 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -24,9 +24,9 @@ #include <asm/mach/irq.h> #include <asm/mach/map.h> -#include <mach/hardware.h> #include "pxa25x.h" -#include <mach/smemc.h> +#include "addr-map.h" +#include "smemc.h" #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index 7eaeda269927..d03520555497 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -34,7 +34,7 @@ #include "pxa27x.h" #include "mfp-pxa27x.h" -#include <mach/z2.h> +#include "z2.h" #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/keypad-pxa27x.h> @@ -651,6 +651,15 @@ static void __init z2_spi_init(void) static inline void z2_spi_init(void) {} #endif +static struct gpiod_lookup_table z2_audio_gpio_table = { + .dev_id = "soc-audio", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO37_ZIPITZ2_HEADSET_DETECT, + "hsdet-gpio", GPIO_ACTIVE_HIGH), + { }, + }, +}; + /****************************************************************************** * Core power regulator ******************************************************************************/ @@ -755,6 +764,8 @@ static void __init z2_init(void) z2_keys_init(); z2_pmic_init(); + gpiod_add_lookup_table(&z2_audio_gpio_table); + pm_power_off = z2_power_off; } diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/z2.h index a78b2e28b1db..a78b2e28b1db 100644 --- a/arch/arm/mach-pxa/include/mach/z2.h +++ b/arch/arm/mach-pxa/z2.h diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 97700429633e..ff0d8bb9f557 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -39,17 +39,17 @@ #include "pxa27x.h" #include "devices.h" -#include <mach/regs-uart.h> +#include "regs-uart.h" #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/mmc-pxamci.h> #include "pxa27x-udc.h" #include "udc.h" #include <linux/platform_data/video-pxafb.h> #include "pm.h" -#include <mach/audio.h> -#include <linux/platform_data/pcmcia-pxa2xx_viper.h> +#include <linux/platform_data/asoc-pxa.h> +#include "viper-pcmcia.h" #include "zeus.h" -#include <mach/smemc.h> +#include "smemc.h" #include "generic.h" @@ -929,6 +929,18 @@ static struct map_desc zeus_io_desc[] __initdata = { .length = 0x00800000, .type = MT_DEVICE, }, + { + /* + * ISA I/O space mapping: + * - ports 0x0000-0x0fff are PC/104 + * - ports 0x10000-0x10fff are PCMCIA slot 1 + * - ports 0x11000-0x11fff are PC/104 + */ + .virtual = PCI_IO_VIRT_BASE, + .pfn = __phys_to_pfn(ZEUS_PC104IO_PHYS), + .length = 0x1000, + .type = MT_DEVICE, + }, }; static void __init zeus_map_io(void) diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 79f0025fa17a..8ed75ac29b1a 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -20,17 +20,19 @@ #include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/smc91x.h> +#include <linux/soc/pxa/cpu.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include "pxa3xx.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> #include "zylonite.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/keypad-pxa27x.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> +#include "mfp.h" #include "devices.h" #include "generic.h" @@ -424,6 +426,35 @@ static void __init zylonite_init_ohci(void) static inline void zylonite_init_ohci(void) {} #endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */ +static struct gpiod_lookup_table zylonite_wm97xx_touch_gpio15_table = { + .dev_id = "wm97xx-touch.0", + .table = { + GPIO_LOOKUP("gpio-pxa", mfp_to_gpio(MFP_PIN_GPIO15), + "touch", GPIO_ACTIVE_LOW), + { }, + }, +}; + +static struct gpiod_lookup_table zylonite_wm97xx_touch_gpio26_table = { + .dev_id = "wm97xx-touch.0", + .table = { + GPIO_LOOKUP("gpio-pxa", mfp_to_gpio(MFP_PIN_GPIO26), + "touch", GPIO_ACTIVE_LOW), + { }, + }, +}; + +static void __init zylonite_init_wm97xx_touch(void) +{ + if (!IS_ENABLED(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE)) + return; + + if (cpu_is_pxa320()) + gpiod_add_lookup_table(&zylonite_wm97xx_touch_gpio15_table); + else + gpiod_add_lookup_table(&zylonite_wm97xx_touch_gpio26_table); +} + static void __init zylonite_init(void) { pxa_set_ffuart_info(NULL); @@ -449,6 +480,7 @@ static void __init zylonite_init(void) zylonite_init_nand(); zylonite_init_leds(); zylonite_init_ohci(); + zylonite_init_wm97xx_touch(); } MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") diff --git a/arch/arm/mach-pxa/zylonite.h b/arch/arm/mach-pxa/zylonite.h index 7300ec2aac0d..afe3efcb8e04 100644 --- a/arch/arm/mach-pxa/zylonite.h +++ b/arch/arm/mach-pxa/zylonite.h @@ -2,6 +2,8 @@ #ifndef __ASM_ARCH_ZYLONITE_H #define __ASM_ARCH_ZYLONITE_H +#include <linux/soc/pxa/cpu.h> + #define ZYLONITE_ETH_PHYS 0x14000000 #define EXT_GPIO(x) (128 + (x)) diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 956fec1c4940..50a8a3547dbc 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -17,6 +17,7 @@ #include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/pca953x.h> #include <linux/gpio.h> +#include <linux/soc/pxa/cpu.h> #include "pxa300.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 94cb834f36cd..67cab4f1194b 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/gpio.h> +#include <linux/soc/pxa/cpu.h> #include "pxa320.h" #include "zylonite.h" diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index 466acc4a5e0c..109e126f7271 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -2,7 +2,6 @@ menuconfig ARCH_QCOM bool "Qualcomm Support" depends on ARCH_MULTI_V7 - select ARCH_SUPPORTS_BIG_ENDIAN select ARM_GIC select ARM_AMBA select PINCTRL diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig deleted file mode 100644 index a4c36024b5e8..000000000000 --- a/arch/arm/mach-realview/Kconfig +++ /dev/null @@ -1,103 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -menuconfig ARCH_REALVIEW - bool "ARM Ltd. RealView family" - depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7 - select ARM_AMBA - select ARM_GIC - select ARM_TIMER_SP804 - select CLK_SP810 - select GPIO_PL061 if GPIOLIB - select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if SMP - select HAVE_PATA_PLATFORM - select HAVE_TCM - select CLK_ICST - select MACH_REALVIEW_EB if ARCH_MULTI_V5 - select MFD_SYSCON - select PLAT_VERSATILE - select POWER_RESET - select POWER_RESET_VERSATILE - select POWER_SUPPLY - select SOC_REALVIEW - help - This enables support for ARM Ltd RealView boards. - -if ARCH_REALVIEW - -config MACH_REALVIEW_EB - bool "Support RealView(R) Emulation Baseboard" - select ARM_GIC - select CPU_ARM926T if ARCH_MULTI_V5 - help - Include support for the ARM(R) RealView(R) Emulation Baseboard - platform. On an ARMv5 kernel, this will include support for - the ARM926EJ-S core tile, while on an ARMv6/v7 kernel, at least - one of the ARM1136, ARM1176, ARM11MPCore or Cortex-A9MPCore - core tile options should be enabled. - -config REALVIEW_EB_ARM1136 - bool "Support ARM1136J(F)-S Tile" - depends on MACH_REALVIEW_EB && ARCH_MULTI_V6 - select CPU_V6 - help - Enable support for the ARM1136 tile fitted to the - Realview(R) Emulation Baseboard platform. - -config REALVIEW_EB_ARM1176 - bool "Support ARM1176JZ(F)-S Tile" - depends on MACH_REALVIEW_EB && ARCH_MULTI_V6 - help - Enable support for the ARM1176 tile fitted to the - Realview(R) Emulation Baseboard platform. - -config REALVIEW_EB_A9MP - bool "Support Multicore Cortex-A9 Tile" - depends on MACH_REALVIEW_EB && ARCH_MULTI_V7 - help - Enable support for the Cortex-A9MPCore tile fitted to the - Realview(R) Emulation Baseboard platform. - -config REALVIEW_EB_ARM11MP - bool "Support ARM11MPCore Tile" - depends on MACH_REALVIEW_EB && ARCH_MULTI_V6 - select HAVE_SMP - help - Enable support for the ARM11MPCore tile fitted to the Realview(R) - Emulation Baseboard platform. - -config MACH_REALVIEW_PB11MP - bool "Support RealView(R) Platform Baseboard for ARM11MPCore" - depends on ARCH_MULTI_V6 - select HAVE_SMP - help - Include support for the ARM(R) RealView(R) Platform Baseboard for - the ARM11MPCore. This platform has an on-board ARM11MPCore and has - support for PCI-E and Compact Flash. - -# ARMv6 CPU without K extensions, but does have the new exclusive ops -config MACH_REALVIEW_PB1176 - bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S" - depends on ARCH_MULTI_V6 - select CPU_V6 - select HAVE_TCM - help - Include support for the ARM(R) RealView(R) Platform Baseboard for - ARM1176JZF-S. - -config MACH_REALVIEW_PBA8 - bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform" - depends on ARCH_MULTI_V7 - help - Include support for the ARM(R) RealView Platform Baseboard for - Cortex(tm)-A8. This platform has an on-board Cortex-A8 and has - support for PCI-E and Compact Flash. - -config MACH_REALVIEW_PBX - bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9" - depends on ARCH_MULTI_V7 - select ZONE_DMA - help - Include support for the ARM(R) RealView(R) Platform Baseboard - Explore. - -endif diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile deleted file mode 100644 index e259091591b8..000000000000 --- a/arch/arm/mach-realview/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for the linux kernel. -# -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-versatile/include - -obj-y += realview-dt.o -obj-$(CONFIG_SMP) += platsmp-dt.o diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c index 5ec58d004b7d..36915a073c23 100644 --- a/arch/arm/mach-rockchip/platsmp.c +++ b/arch/arm/mach-rockchip/platsmp.c @@ -137,7 +137,7 @@ static int rockchip_boot_secondary(unsigned int cpu, struct task_struct *idle) /* * We communicate with the bootrom to active the cpus other * than cpu0, after a blob of initialize code, they will - * stay at wfe state, once they are actived, they will check + * stay at wfe state, once they are activated, they will check * the mailbox: * sram_base_addr + 4: 0xdeadbeaf * sram_base_addr + 8: start address for pc diff --git a/arch/arm/mach-s3c/Kconfig b/arch/arm/mach-s3c/Kconfig index 1899fc3f44fd..54548c051402 100644 --- a/arch/arm/mach-s3c/Kconfig +++ b/arch/arm/mach-s3c/Kconfig @@ -207,14 +207,6 @@ config SAMSUNG_DEV_PWM help Compile in platform device definition for PWM Timer -config S3C24XX_PWM - bool "PWM device support" - select PWM - select PWM_SAMSUNG - help - Support for exporting the PWM timer blocks via the pwm device - system - config GPIO_SAMSUNG def_bool y diff --git a/arch/arm/mach-s3c/Kconfig.s3c24xx b/arch/arm/mach-s3c/Kconfig.s3c24xx index 000e3e234f71..662c5aec2ea3 100644 --- a/arch/arm/mach-s3c/Kconfig.s3c24xx +++ b/arch/arm/mach-s3c/Kconfig.s3c24xx @@ -4,6 +4,27 @@ # http://www.samsung.com/ # # Copyright 2007 Simtec Electronics +menuconfig ARCH_S3C24XX + bool "Samsung S3C24XX SoCs (deprecated, see help)" + depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN + select ATAGS + select CLKSRC_SAMSUNG_PWM + select GPIO_SAMSUNG + select GPIOLIB + select S3C2410_WATCHDOG + select SAMSUNG_ATAGS + select WATCHDOG + help + Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 + and S3C2450 SoCs based systems, such as the Simtec Electronics BAST + (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the + Samsung SMDK2410 development board (and derivatives). + + The platform is deprecated and scheduled for removal. Please reach to + the maintainers of the platform and linux-samsung-soc@vger.kernel.org if + you still use it. + Without such feedback, the platform will be removed after 2022. if ARCH_S3C24XX @@ -12,7 +33,6 @@ config PLAT_S3C24XX select GPIOLIB select NO_IOPORT_MAP select S3C_DEV_NAND - select IRQ_DOMAIN select COMMON_CLK help Base platform code for any Samsung S3C24XX device @@ -25,6 +45,7 @@ comment "S3C24XX SoCs" config CPU_S3C2410 bool "Samsung S3C2410" + depends on ARCH_MULTI_V4T default y select CPU_ARM920T select S3C2410_COMMON_CLK @@ -36,6 +57,7 @@ config CPU_S3C2410 config CPU_S3C2412 bool "Samsung S3C2412" + depends on ARCH_MULTI_V5 select CPU_ARM926T select S3C2412_COMMON_CLK select S3C2412_PM if PM_SLEEP @@ -44,6 +66,7 @@ config CPU_S3C2412 config CPU_S3C2416 bool "Samsung S3C2416/S3C2450" + depends on ARCH_MULTI_V5 select CPU_ARM926T select S3C2416_PM if PM_SLEEP select S3C2443_COMMON_CLK @@ -52,6 +75,7 @@ config CPU_S3C2416 config CPU_S3C2440 bool "Samsung S3C2440" + depends on ARCH_MULTI_V4T select CPU_ARM920T select S3C2410_COMMON_CLK select S3C2410_PM if PM_SLEEP @@ -60,6 +84,7 @@ config CPU_S3C2440 config CPU_S3C2442 bool "Samsung S3C2442" + depends on ARCH_MULTI_V4T select CPU_ARM920T select S3C2410_COMMON_CLK select S3C2410_PM if PM_SLEEP @@ -72,6 +97,7 @@ config CPU_S3C244X config CPU_S3C2443 bool "Samsung S3C2443" + depends on ARCH_MULTI_V4T select CPU_ARM920T select S3C2443_COMMON_CLK help @@ -181,7 +207,6 @@ config MACH_AML_M5900 config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" - select ISA select MACH_BAST_IDE select S3C2410_COMMON_DCLK select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ @@ -532,7 +557,6 @@ config MACH_NEO1973_GTA02 select MFD_PCF50633 select PCF50633_GPIO select POWER_SUPPLY - select S3C24XX_PWM select S3C_DEV_USB_HOST help Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone @@ -544,7 +568,6 @@ config MACH_RX1950 select S3C2410_COMMON_DCLK select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_16934400 - select S3C24XX_PWM select S3C_DEV_NAND help Say Y here if you're using HP iPAQ rx1950 diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx index af01675d8769..2b27bff4d928 100644 --- a/arch/arm/mach-s3c/Kconfig.s3c64xx +++ b/arch/arm/mach-s3c/Kconfig.s3c64xx @@ -4,7 +4,7 @@ # Simtec Electronics, Ben Dooks <ben@simtec.co.uk> menuconfig ARCH_S3C64XX - bool "Samsung S3C64XX" + bool "Samsung S3C64XX (deprecated, see help)" depends on ARCH_MULTI_V6 select ARM_AMBA select ARM_VIC @@ -24,6 +24,11 @@ menuconfig ARCH_S3C64XX help Samsung S3C64XX series based systems + The platform is deprecated and scheduled for removal. Please reach to + the maintainers of the platform and linux-samsung-soc@vger.kernel.org if + you still use it. + Without such feedback, the platform will be removed after 2024. + if ARCH_S3C64XX # Configuration options for the S3C6410 CPU diff --git a/arch/arm/mach-s3c/Makefile b/arch/arm/mach-s3c/Makefile index 54188d10ab2e..7c7d3318fd61 100644 --- a/arch/arm/mach-s3c/Makefile +++ b/arch/arm/mach-s3c/Makefile @@ -2,8 +2,6 @@ # # Copyright 2009 Simtec Electronics -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include - ifdef CONFIG_ARCH_S3C24XX include $(src)/Makefile.s3c24xx endif diff --git a/arch/arm/mach-s3c/Makefile.s3c64xx b/arch/arm/mach-s3c/Makefile.s3c64xx index 0c18e31936df..21e919bf2cd1 100644 --- a/arch/arm/mach-s3c/Makefile.s3c64xx +++ b/arch/arm/mach-s3c/Makefile.s3c64xx @@ -3,9 +3,6 @@ # Copyright 2008 Openmoko, Inc. # Copyright 2008 Simtec Electronics -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include - # PM obj-$(CONFIG_PM) += pm-s3c64xx.o diff --git a/arch/arm/mach-s3c/bast-ide.c b/arch/arm/mach-s3c/bast-ide.c index da64db1811d8..67f0adc1fec0 100644 --- a/arch/arm/mach-s3c/bast-ide.c +++ b/arch/arm/mach-s3c/bast-ide.c @@ -20,7 +20,7 @@ #include <asm/mach/irq.h> #include "map.h" -#include <mach/irqs.h> +#include "irqs.h" #include "bast.h" diff --git a/arch/arm/mach-s3c/bast-irq.c b/arch/arm/mach-s3c/bast-irq.c index d299f124e6dc..cfc2ddc65513 100644 --- a/arch/arm/mach-s3c/bast-irq.c +++ b/arch/arm/mach-s3c/bast-irq.c @@ -16,7 +16,7 @@ #include <asm/mach/irq.h> #include "regs-irq.h" -#include <mach/irqs.h> +#include "irqs.h" #include "bast.h" diff --git a/arch/arm/mach-s3c/cpu.c b/arch/arm/mach-s3c/cpu.c index 6e9772555f0d..3491f790d575 100644 --- a/arch/arm/mach-s3c/cpu.c +++ b/arch/arm/mach-s3c/cpu.c @@ -10,7 +10,7 @@ #include <linux/init.h> #include <linux/io.h> -#include <mach/map-base.h> +#include "map-base.h" #include "cpu.h" unsigned long samsung_cpu_id; @@ -28,4 +28,5 @@ void __init s3c64xx_init_cpu(void) } pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id); + pr_err("The platform is deprecated and scheduled for removal. Please reach to the maintainers of the platform and linux-samsung-soc@vger.kernel.org if you still use it. Without such feedback, the platform will be removed after 2022.\n"); } diff --git a/arch/arm/mach-s3c/dev-audio-s3c64xx.c b/arch/arm/mach-s3c/dev-audio-s3c64xx.c index fc2f077afd24..909e82c148ba 100644 --- a/arch/arm/mach-s3c/dev-audio-s3c64xx.c +++ b/arch/arm/mach-s3c/dev-audio-s3c64xx.c @@ -10,7 +10,7 @@ #include <linux/gpio.h> #include <linux/export.h> -#include <mach/irqs.h> +#include "irqs.h" #include "map.h" #include "devs.h" diff --git a/arch/arm/mach-s3c/dev-uart-s3c64xx.c b/arch/arm/mach-s3c/dev-uart-s3c64xx.c index 8288e8d6c092..f9c947b8971b 100644 --- a/arch/arm/mach-s3c/dev-uart-s3c64xx.c +++ b/arch/arm/mach-s3c/dev-uart-s3c64xx.c @@ -16,7 +16,7 @@ #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include "map.h" -#include <mach/irqs.h> +#include "irqs.h" #include "devs.h" diff --git a/arch/arm/mach-s3c/devs.c b/arch/arm/mach-s3c/devs.c index 1e266fc24f9b..9ac07c023adf 100644 --- a/arch/arm/mach-s3c/devs.c +++ b/arch/arm/mach-s3c/devs.c @@ -38,7 +38,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/irqs.h> +#include "irqs.h" #include "map.h" #include "gpio-samsung.h" #include "gpio-cfg.h" diff --git a/arch/arm/mach-s3c/gpio-samsung.c b/arch/arm/mach-s3c/gpio-samsung.c index fda2c01f5a08..b7fc7c41309c 100644 --- a/arch/arm/mach-s3c/gpio-samsung.c +++ b/arch/arm/mach-s3c/gpio-samsung.c @@ -26,7 +26,7 @@ #include <asm/irq.h> -#include <mach/irqs.h> +#include "irqs.h" #include "map.h" #include "regs-gpio.h" #include "gpio-samsung.h" diff --git a/arch/arm/mach-s3c/include/mach/io-s3c24xx.h b/arch/arm/mach-s3c/include/mach/io-s3c24xx.h deleted file mode 100644 index 738b775d3336..000000000000 --- a/arch/arm/mach-s3c/include/mach/io-s3c24xx.h +++ /dev/null @@ -1,50 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-s3c2410/include/mach/io.h - * from arch/arm/mach-rpc/include/mach/io.h - * - * Copyright (C) 1997 Russell King - * (C) 2003 Simtec Electronics -*/ - -#ifndef __ASM_ARM_ARCH_IO_S3C24XX_H -#define __ASM_ARM_ARCH_IO_S3C24XX_H - -#include <mach/map-base.h> - -/* - * ISA style IO, for each machine to sort out mappings for, - * if it implements it. We reserve two 16M regions for ISA, - * so the PC/104 can use separate addresses for 8-bit and - * 16-bit port I/O. - */ -#define PCIO_BASE S3C_ADDR(0x02000000) -#define IO_SPACE_LIMIT 0x00ffffff -#define S3C24XX_VA_ISA_WORD (PCIO_BASE) -#define S3C24XX_VA_ISA_BYTE (PCIO_BASE + 0x01000000) - -#ifdef CONFIG_ISA - -#define inb(p) readb(S3C24XX_VA_ISA_BYTE + (p)) -#define inw(p) readw(S3C24XX_VA_ISA_WORD + (p)) -#define inl(p) readl(S3C24XX_VA_ISA_WORD + (p)) - -#define outb(v,p) writeb((v), S3C24XX_VA_ISA_BYTE + (p)) -#define outw(v,p) writew((v), S3C24XX_VA_ISA_WORD + (p)) -#define outl(v,p) writel((v), S3C24XX_VA_ISA_WORD + (p)) - -#define insb(p,d,l) readsb(S3C24XX_VA_ISA_BYTE + (p),d,l) -#define insw(p,d,l) readsw(S3C24XX_VA_ISA_WORD + (p),d,l) -#define insl(p,d,l) readsl(S3C24XX_VA_ISA_WORD + (p),d,l) - -#define outsb(p,d,l) writesb(S3C24XX_VA_ISA_BYTE + (p),d,l) -#define outsw(p,d,l) writesw(S3C24XX_VA_ISA_WORD + (p),d,l) -#define outsl(p,d,l) writesl(S3C24XX_VA_ISA_WORD + (p),d,l) - -#else - -#define __io(x) (PCIO_BASE + (x)) - -#endif - -#endif diff --git a/arch/arm/mach-s3c/include/mach/io.h b/arch/arm/mach-s3c/include/mach/io.h deleted file mode 100644 index 30a0135708dc..000000000000 --- a/arch/arm/mach-s3c/include/mach/io.h +++ /dev/null @@ -1,8 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org> - */ - -#ifdef CONFIG_ARCH_S3C24XX -#include "io-s3c24xx.h" -#endif diff --git a/arch/arm/mach-s3c/init.c b/arch/arm/mach-s3c/init.c index 9d92f03e9bc1..bf513616f55d 100644 --- a/arch/arm/mach-s3c/init.c +++ b/arch/arm/mach-s3c/init.c @@ -59,6 +59,8 @@ void __init s3c_init_cpu(unsigned long idcode, if (cpu->map_io) cpu->map_io(); + + pr_err("The platform is deprecated and scheduled for removal. Please reach to the maintainers of the platform and linux-samsung-soc@vger.kernel.org if you still use it. Without such feedback, the platform will be removed after 2022.\n"); } /* s3c24xx_init_clocks diff --git a/arch/arm/mach-s3c/iotiming-s3c2410.c b/arch/arm/mach-s3c/iotiming-s3c2410.c index 28d9f473e24a..09f388d8f824 100644 --- a/arch/arm/mach-s3c/iotiming-s3c2410.c +++ b/arch/arm/mach-s3c/iotiming-s3c2410.c @@ -259,7 +259,7 @@ static const unsigned int tacc_tab[] = { /** * get_tacc - turn tACC value into cycle time * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds. - * @val: The bank timing register value, shifed down. + * @val: The bank timing register value, shifted down. */ static unsigned int get_tacc(unsigned long hclk_tns, unsigned long val) diff --git a/arch/arm/mach-s3c/irq-pm-s3c24xx.c b/arch/arm/mach-s3c/irq-pm-s3c24xx.c index 4d5e28312d91..55f41135ad70 100644 --- a/arch/arm/mach-s3c/irq-pm-s3c24xx.c +++ b/arch/arm/mach-s3c/irq-pm-s3c24xx.c @@ -15,7 +15,7 @@ #include "cpu.h" #include "pm.h" -#include <mach/map-base.h> +#include "map-base.h" #include "map-s3c.h" #include "regs-irq.h" diff --git a/arch/arm/mach-s3c/irq-s3c24xx.c b/arch/arm/mach-s3c/irq-s3c24xx.c index 3776d5206f9b..088cc04b7431 100644 --- a/arch/arm/mach-s3c/irq-s3c24xx.c +++ b/arch/arm/mach-s3c/irq-s3c24xx.c @@ -26,7 +26,7 @@ #include <asm/exception.h> #include <asm/mach/irq.h> -#include <mach/irqs.h> +#include "irqs.h" #include "regs-irq.h" #include "regs-gpio.h" diff --git a/arch/arm/mach-s3c/include/mach/irqs-s3c24xx.h b/arch/arm/mach-s3c/irqs-s3c24xx.h index aaf3bae08b52..fecbf7e440c6 100644 --- a/arch/arm/mach-s3c/include/mach/irqs-s3c24xx.h +++ b/arch/arm/mach-s3c/irqs-s3c24xx.h @@ -108,6 +108,8 @@ #define IRQ_TC S3C2410_IRQSUB(9) #define IRQ_ADC S3C2410_IRQSUB(10) +#define NR_IRQS_S3C2410 (S3C2410_IRQSUB(10) + 1) + /* extra irqs for s3c2412 */ #define IRQ_S3C2412_CFSDI S3C2410_IRQ(21) @@ -115,6 +117,7 @@ #define IRQ_S3C2412_SDI S3C2410_IRQSUB(13) #define IRQ_S3C2412_CF S3C2410_IRQSUB(14) +#define NR_IRQS_S3C2412 (S3C2410_IRQSUB(14) + 1) #define IRQ_S3C2416_EINT8t15 S3C2410_IRQ(5) #define IRQ_S3C2416_DMA S3C2410_IRQ(17) @@ -146,13 +149,20 @@ #define IRQ_S3C2416_I2S0 S3C2416_IRQ(6) #define IRQ_S3C2416_I2S1 S3C2416_IRQ(7) -/* extra irqs for s3c2440 */ +#define NR_IRQS_S3C2416 (S3C2416_IRQ(7) + 1) + +/* extra irqs for s3c2440/s3c2442 */ #define IRQ_S3C2440_CAM_C S3C2410_IRQSUB(11) /* S3C2443 too */ #define IRQ_S3C2440_CAM_P S3C2410_IRQSUB(12) /* S3C2443 too */ + +#define NR_IRQS_S3C2442 (S3C2410_IRQSUB(12) + 1) + #define IRQ_S3C2440_WDT S3C2410_IRQSUB(13) #define IRQ_S3C2440_AC97 S3C2410_IRQSUB(14) +#define NR_IRQS_S3C2440 (S3C2410_IRQSUB(14) + 1) + /* irqs for s3c2443 */ #define IRQ_S3C2443_DMA S3C2410_IRQ(17) /* IRQ_DMA1 */ @@ -186,11 +196,7 @@ #define IRQ_S3C2443_WDT S3C2410_IRQSUB(27) #define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28) -#if defined(CONFIG_CPU_S3C2416) -#define NR_IRQS (IRQ_S3C2416_I2S1 + 1) -#else -#define NR_IRQS (IRQ_S3C2443_AC97 + 1) -#endif +#define NR_IRQS_S3C2443 (S3C2410_IRQSUB(28) + 1) /* compatibility define. */ #define IRQ_UART3 IRQ_S3C2443_UART3 diff --git a/arch/arm/mach-s3c/include/mach/irqs-s3c64xx.h b/arch/arm/mach-s3c/irqs-s3c64xx.h index c244e480e6b3..c244e480e6b3 100644 --- a/arch/arm/mach-s3c/include/mach/irqs-s3c64xx.h +++ b/arch/arm/mach-s3c/irqs-s3c64xx.h diff --git a/arch/arm/mach-s3c/include/mach/irqs.h b/arch/arm/mach-s3c/irqs.h index 0bff1c1c8eb0..0bff1c1c8eb0 100644 --- a/arch/arm/mach-s3c/include/mach/irqs.h +++ b/arch/arm/mach-s3c/irqs.h diff --git a/arch/arm/mach-s3c/mach-amlm5900.c b/arch/arm/mach-s3c/mach-amlm5900.c index 94c4512ace17..f85e5885e9b4 100644 --- a/arch/arm/mach-s3c/mach-amlm5900.c +++ b/arch/arm/mach-s3c/mach-amlm5900.c @@ -239,7 +239,9 @@ static void __init amlm5900_init(void) MACHINE_START(AML_M5900, "AML_M5900") .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2410, .map_io = amlm5900_map_io, + .nr_irqs = NR_IRQS_S3C2410, .init_irq = s3c2410_init_irq, .init_machine = amlm5900_init, .init_time = amlm5900_init_time, diff --git a/arch/arm/mach-s3c/mach-anubis.c b/arch/arm/mach-s3c/mach-anubis.c index 04147cc0adcc..4536f3e66e27 100644 --- a/arch/arm/mach-s3c/mach-anubis.c +++ b/arch/arm/mach-s3c/mach-anubis.c @@ -57,11 +57,6 @@ static struct map_desc anubis_iodesc[] __initdata = { .pfn = __phys_to_pfn(0x0), .length = SZ_4M, .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_WORD, - .pfn = __phys_to_pfn(0x0), - .length = SZ_4M, - .type = MT_DEVICE, }, /* we could possibly compress the next set down into a set of smaller tables @@ -419,6 +414,7 @@ static void __init anubis_init(void) MACHINE_START(ANUBIS, "Simtec-Anubis") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2440, .map_io = anubis_map_io, .init_machine = anubis_init, .init_irq = s3c2440_init_irq, diff --git a/arch/arm/mach-s3c/mach-anw6410.c b/arch/arm/mach-s3c/mach-anw6410.c index 825714e9ac66..b67eae43e04f 100644 --- a/arch/arm/mach-s3c/mach-anw6410.c +++ b/arch/arm/mach-s3c/mach-anw6410.c @@ -40,7 +40,7 @@ #include "devs.h" #include "cpu.h" -#include <mach/irqs.h> +#include "irqs.h" #include "regs-gpio.h" #include "gpio-samsung.h" diff --git a/arch/arm/mach-s3c/mach-at2440evb.c b/arch/arm/mach-s3c/mach-at2440evb.c index c6a5a51d84aa..743403d873e0 100644 --- a/arch/arm/mach-s3c/mach-at2440evb.c +++ b/arch/arm/mach-s3c/mach-at2440evb.c @@ -225,6 +225,7 @@ static void __init at2440evb_init(void) MACHINE_START(AT2440EVB, "AT2440EVB") .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2440, .map_io = at2440evb_map_io, .init_machine = at2440evb_init, .init_irq = s3c2440_init_irq, diff --git a/arch/arm/mach-s3c/mach-bast.c b/arch/arm/mach-s3c/mach-bast.c index 27e8d5950228..a33ceab81e09 100644 --- a/arch/arm/mach-s3c/mach-bast.c +++ b/arch/arm/mach-s3c/mach-bast.c @@ -75,11 +75,6 @@ static struct map_desc bast_iodesc[] __initdata = { .pfn = PA_CS2(BAST_PA_ISAIO), .length = SZ_16M, .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_WORD, - .pfn = PA_CS3(BAST_PA_ISAIO), - .length = SZ_16M, - .type = MT_DEVICE, }, /* bast CPLD control registers, and external interrupt controls */ { @@ -580,6 +575,7 @@ static void __init bast_init(void) MACHINE_START(BAST, "Simtec-BAST") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2410, .map_io = bast_map_io, .init_irq = s3c2410_init_irq, .init_machine = bast_init, diff --git a/arch/arm/mach-s3c/mach-crag6410-module.c b/arch/arm/mach-s3c/mach-crag6410-module.c index 5d1d4b67a4b7..4edde13b89b5 100644 --- a/arch/arm/mach-s3c/mach-crag6410-module.c +++ b/arch/arm/mach-s3c/mach-crag6410-module.c @@ -28,7 +28,7 @@ #include <linux/platform_data/spi-s3c64xx.h> #include "cpu.h" -#include <mach/irqs.h> +#include "irqs.h" #include "crag6410.h" diff --git a/arch/arm/mach-s3c/mach-crag6410.c b/arch/arm/mach-s3c/mach-crag6410.c index e3e0fe897bcc..9a45474d1bf7 100644 --- a/arch/arm/mach-s3c/mach-crag6410.c +++ b/arch/arm/mach-s3c/mach-crag6410.c @@ -47,7 +47,7 @@ #include "map.h" #include "regs-gpio.h" #include "gpio-samsung.h" -#include <mach/irqs.h> +#include "irqs.h" #include "fb.h" #include "sdhci.h" diff --git a/arch/arm/mach-s3c/mach-gta02.c b/arch/arm/mach-s3c/mach-gta02.c index 418939ce0fc3..abfdce765525 100644 --- a/arch/arm/mach-s3c/mach-gta02.c +++ b/arch/arm/mach-s3c/mach-gta02.c @@ -572,6 +572,7 @@ static void __init gta02_init_time(void) MACHINE_START(NEO1973_GTA02, "GTA02") /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */ .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2442, .map_io = gta02_map_io, .init_irq = s3c2442_init_irq, .init_machine = gta02_machine_init, diff --git a/arch/arm/mach-s3c/mach-h1940.c b/arch/arm/mach-s3c/mach-h1940.c index 8a43ed1c4c4d..032b18837855 100644 --- a/arch/arm/mach-s3c/mach-h1940.c +++ b/arch/arm/mach-s3c/mach-h1940.c @@ -793,6 +793,7 @@ static void __init h1940_init(void) MACHINE_START(H1940, "IPAQ-H1940") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2410, .map_io = h1940_map_io, .reserve = h1940_reserve, .init_irq = s3c2410_init_irq, diff --git a/arch/arm/mach-s3c/mach-hmt.c b/arch/arm/mach-s3c/mach-hmt.c index b287e9987311..49ba16c447aa 100644 --- a/arch/arm/mach-s3c/mach-hmt.c +++ b/arch/arm/mach-s3c/mach-hmt.c @@ -26,7 +26,7 @@ #include <video/samsung_fimd.h> #include "map.h" -#include <mach/irqs.h> +#include "irqs.h" #include <asm/irq.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-s3c/mach-jive.c b/arch/arm/mach-s3c/mach-jive.c index 0d7d408c3729..e32773175944 100644 --- a/arch/arm/mach-s3c/mach-jive.c +++ b/arch/arm/mach-s3c/mach-jive.c @@ -677,7 +677,7 @@ static void __init jive_machine_init(void) MACHINE_START(JIVE, "JIVE") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - + .nr_irqs = NR_IRQS_S3C2412, .init_irq = s3c2412_init_irq, .map_io = jive_map_io, .init_machine = jive_machine_init, diff --git a/arch/arm/mach-s3c/mach-mini2440.c b/arch/arm/mach-s3c/mach-mini2440.c index 551ec660ab59..131015cc0c34 100644 --- a/arch/arm/mach-s3c/mach-mini2440.c +++ b/arch/arm/mach-s3c/mach-mini2440.c @@ -35,7 +35,7 @@ #include "regs-gpio.h" #include <linux/platform_data/leds-s3c24xx.h> -#include <mach/irqs.h> +#include "irqs.h" #include "gpio-samsung.h" #include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h> @@ -789,6 +789,7 @@ static void __init mini2440_init(void) MACHINE_START(MINI2440, "MINI2440") /* Maintainer: Michel Pollet <buserror@gmail.com> */ .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2440, .map_io = mini2440_map_io, .init_machine = mini2440_init, .init_irq = s3c2440_init_irq, diff --git a/arch/arm/mach-s3c/mach-mini6410.c b/arch/arm/mach-s3c/mach-mini6410.c index c14c2e27127b..058ae9e8b89f 100644 --- a/arch/arm/mach-s3c/mach-mini6410.c +++ b/arch/arm/mach-s3c/mach-mini6410.c @@ -35,7 +35,7 @@ #include <linux/platform_data/mmc-sdhci-s3c.h> #include "sdhci.h" #include <linux/platform_data/touchscreen-s3c2410.h> -#include <mach/irqs.h> +#include "irqs.h" #include <video/platform_lcd.h> #include <video/samsung_fimd.h> diff --git a/arch/arm/mach-s3c/mach-n30.c b/arch/arm/mach-s3c/mach-n30.c index e40c1fcf418c..75f5dc6351a1 100644 --- a/arch/arm/mach-s3c/mach-n30.c +++ b/arch/arm/mach-s3c/mach-n30.c @@ -656,6 +656,7 @@ MACHINE_START(N30, "Acer-N30") Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2410, .init_time = n30_init_time, .init_machine = n30_init, .init_irq = s3c2410_init_irq, @@ -666,6 +667,7 @@ MACHINE_START(N35, "Acer-N35") /* Maintainer: Christer Weinigel <christer@weinigel.se> */ .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2410, .init_time = n30_init_time, .init_machine = n30_init, .init_irq = s3c2410_init_irq, diff --git a/arch/arm/mach-s3c/mach-ncp.c b/arch/arm/mach-s3c/mach-ncp.c index 1a45bed56622..1e65f8bce5c4 100644 --- a/arch/arm/mach-s3c/mach-ncp.c +++ b/arch/arm/mach-s3c/mach-ncp.c @@ -24,7 +24,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/irqs.h> +#include "irqs.h" #include "map.h" #include <asm/irq.h> diff --git a/arch/arm/mach-s3c/mach-nexcoder.c b/arch/arm/mach-s3c/mach-nexcoder.c index 2a454c919658..d17a3fcb7425 100644 --- a/arch/arm/mach-s3c/mach-nexcoder.c +++ b/arch/arm/mach-s3c/mach-nexcoder.c @@ -154,6 +154,7 @@ static void __init nexcoder_init(void) MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */ .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2440, .map_io = nexcoder_map_io, .init_machine = nexcoder_init, .init_irq = s3c2440_init_irq, diff --git a/arch/arm/mach-s3c/mach-osiris.c b/arch/arm/mach-s3c/mach-osiris.c index 3aefb9d22340..d900d1354de1 100644 --- a/arch/arm/mach-s3c/mach-osiris.c +++ b/arch/arm/mach-s3c/mach-osiris.c @@ -58,11 +58,6 @@ static struct map_desc osiris_iodesc[] __initdata = { .pfn = __phys_to_pfn(S3C2410_CS5), .length = SZ_16M, .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_WORD, - .pfn = __phys_to_pfn(S3C2410_CS5), - .length = SZ_16M, - .type = MT_DEVICE, }, /* CPLD control registers */ @@ -402,6 +397,7 @@ static void __init osiris_init(void) MACHINE_START(OSIRIS, "Simtec-OSIRIS") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2440, .map_io = osiris_map_io, .init_irq = s3c2440_init_irq, .init_machine = osiris_init, diff --git a/arch/arm/mach-s3c/mach-otom.c b/arch/arm/mach-s3c/mach-otom.c index 460ee97766cd..3a2db2f58833 100644 --- a/arch/arm/mach-s3c/mach-otom.c +++ b/arch/arm/mach-s3c/mach-otom.c @@ -116,6 +116,7 @@ static void __init otom11_init(void) MACHINE_START(OTOM, "Nex Vision - Otom 1.1") /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */ .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2410, .map_io = otom11_map_io, .init_machine = otom11_init, .init_irq = s3c2410_init_irq, diff --git a/arch/arm/mach-s3c/mach-qt2410.c b/arch/arm/mach-s3c/mach-qt2410.c index f88b961798fd..36fe0684a438 100644 --- a/arch/arm/mach-s3c/mach-qt2410.c +++ b/arch/arm/mach-s3c/mach-qt2410.c @@ -367,6 +367,7 @@ static void __init qt2410_machine_init(void) MACHINE_START(QT2410, "QT2410") .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2410, .map_io = qt2410_map_io, .init_irq = s3c2410_init_irq, .init_machine = qt2410_machine_init, diff --git a/arch/arm/mach-s3c/mach-real6410.c b/arch/arm/mach-s3c/mach-real6410.c index 9d218a53d631..8c10ebc38a9c 100644 --- a/arch/arm/mach-s3c/mach-real6410.c +++ b/arch/arm/mach-s3c/mach-real6410.c @@ -27,7 +27,7 @@ #include "map.h" #include "regs-gpio.h" #include "gpio-samsung.h" -#include <mach/irqs.h> +#include "irqs.h" #include <linux/soc/samsung/s3c-adc.h> #include "cpu.h" diff --git a/arch/arm/mach-s3c/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c index 313e080e179e..7a3e7c0a6484 100644 --- a/arch/arm/mach-s3c/mach-rx1950.c +++ b/arch/arm/mach-s3c/mach-rx1950.c @@ -868,6 +868,7 @@ static void __init rx1950_reserve(void) MACHINE_START(RX1950, "HP iPAQ RX1950") /* Maintainers: Vasily Khoruzhick */ .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2442, .map_io = rx1950_map_io, .reserve = rx1950_reserve, .init_irq = s3c2442_init_irq, diff --git a/arch/arm/mach-s3c/mach-rx3715.c b/arch/arm/mach-s3c/mach-rx3715.c index 9fd2d9dc3689..52b3c38acbb2 100644 --- a/arch/arm/mach-s3c/mach-rx3715.c +++ b/arch/arm/mach-s3c/mach-rx3715.c @@ -48,13 +48,7 @@ static struct map_desc rx3715_iodesc[] __initdata = { /* dump ISA space somewhere unused */ - { - .virtual = (u32)S3C24XX_VA_ISA_WORD, - .pfn = __phys_to_pfn(S3C2410_CS3), - .length = SZ_1M, - .type = MT_DEVICE, - }, { .virtual = (u32)S3C24XX_VA_ISA_BYTE, .pfn = __phys_to_pfn(S3C2410_CS3), .length = SZ_1M, @@ -210,6 +204,7 @@ static void __init rx3715_init_machine(void) MACHINE_START(RX3715, "IPAQ-RX3715") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2440, .map_io = rx3715_map_io, .reserve = rx3715_reserve, .init_irq = s3c2440_init_irq, diff --git a/arch/arm/mach-s3c/mach-smartq5.c b/arch/arm/mach-s3c/mach-smartq5.c index 8c940227e810..ce3fce0bba20 100644 --- a/arch/arm/mach-s3c/mach-smartq5.c +++ b/arch/arm/mach-s3c/mach-smartq5.c @@ -14,7 +14,7 @@ #include <asm/mach/arch.h> #include <video/samsung_fimd.h> -#include <mach/irqs.h> +#include "irqs.h" #include "map.h" #include "regs-gpio.h" #include "gpio-samsung.h" diff --git a/arch/arm/mach-s3c/mach-smartq7.c b/arch/arm/mach-s3c/mach-smartq7.c index ab243969d6d0..78ca0e704797 100644 --- a/arch/arm/mach-s3c/mach-smartq7.c +++ b/arch/arm/mach-s3c/mach-smartq7.c @@ -14,7 +14,7 @@ #include <asm/mach/arch.h> #include <video/samsung_fimd.h> -#include <mach/irqs.h> +#include "irqs.h" #include "map.h" #include "regs-gpio.h" #include "gpio-samsung.h" diff --git a/arch/arm/mach-s3c/mach-smdk2410.c b/arch/arm/mach-s3c/mach-smdk2410.c index ca83d5a7d101..76b0a8846616 100644 --- a/arch/arm/mach-s3c/mach-smdk2410.c +++ b/arch/arm/mach-s3c/mach-smdk2410.c @@ -104,6 +104,7 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc * to SMDK2410 */ /* Maintainer: Jonas Dietsche */ .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2410, .map_io = smdk2410_map_io, .init_irq = s3c2410_init_irq, .init_machine = smdk2410_init, diff --git a/arch/arm/mach-s3c/mach-smdk2413.c b/arch/arm/mach-s3c/mach-smdk2413.c index c43095b321d7..f1f0ec174579 100644 --- a/arch/arm/mach-s3c/mach-smdk2413.c +++ b/arch/arm/mach-s3c/mach-smdk2413.c @@ -129,6 +129,7 @@ static void __init smdk2413_machine_init(void) MACHINE_START(S3C2413, "S3C2413") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2412, .fixup = smdk2413_fixup, .init_irq = s3c2412_init_irq, @@ -140,6 +141,7 @@ MACHINE_END MACHINE_START(SMDK2412, "SMDK2412") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2412, .fixup = smdk2413_fixup, .init_irq = s3c2412_init_irq, @@ -151,6 +153,7 @@ MACHINE_END MACHINE_START(SMDK2413, "SMDK2413") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2412, .fixup = smdk2413_fixup, .init_irq = s3c2412_init_irq, diff --git a/arch/arm/mach-s3c/mach-smdk2416.c b/arch/arm/mach-s3c/mach-smdk2416.c index 4d883a792cc6..329fe26be268 100644 --- a/arch/arm/mach-s3c/mach-smdk2416.c +++ b/arch/arm/mach-s3c/mach-smdk2416.c @@ -53,16 +53,6 @@ static struct map_desc smdk2416_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ { - .virtual = (u32)S3C24XX_VA_ISA_WORD, - .pfn = __phys_to_pfn(S3C2410_CS2), - .length = 0x10000, - .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000, - .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), - .length = SZ_4M, - .type = MT_DEVICE, - }, { .virtual = (u32)S3C24XX_VA_ISA_BYTE, .pfn = __phys_to_pfn(S3C2410_CS2), .length = 0x10000, @@ -249,6 +239,7 @@ static void __init smdk2416_machine_init(void) MACHINE_START(SMDK2416, "SMDK2416") /* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */ .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2416, .init_irq = s3c2416_init_irq, .map_io = smdk2416_map_io, diff --git a/arch/arm/mach-s3c/mach-smdk2440.c b/arch/arm/mach-s3c/mach-smdk2440.c index 7f6fe0db04f3..6aea769ebde1 100644 --- a/arch/arm/mach-s3c/mach-smdk2440.c +++ b/arch/arm/mach-s3c/mach-smdk2440.c @@ -43,16 +43,6 @@ static struct map_desc smdk2440_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ { - .virtual = (u32)S3C24XX_VA_ISA_WORD, - .pfn = __phys_to_pfn(S3C2410_CS2), - .length = 0x10000, - .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000, - .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), - .length = SZ_4M, - .type = MT_DEVICE, - }, { .virtual = (u32)S3C24XX_VA_ISA_BYTE, .pfn = __phys_to_pfn(S3C2410_CS2), .length = 0x10000, @@ -181,6 +171,7 @@ static void __init smdk2440_machine_init(void) MACHINE_START(S3C2440, "SMDK2440") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2440, .init_irq = s3c2440_init_irq, .map_io = smdk2440_map_io, diff --git a/arch/arm/mach-s3c/mach-smdk2443.c b/arch/arm/mach-s3c/mach-smdk2443.c index fc54c91ade56..075140f8f760 100644 --- a/arch/arm/mach-s3c/mach-smdk2443.c +++ b/arch/arm/mach-s3c/mach-smdk2443.c @@ -40,16 +40,6 @@ static struct map_desc smdk2443_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ { - .virtual = (u32)S3C24XX_VA_ISA_WORD, - .pfn = __phys_to_pfn(S3C2410_CS2), - .length = 0x10000, - .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000, - .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), - .length = SZ_4M, - .type = MT_DEVICE, - }, { .virtual = (u32)S3C24XX_VA_ISA_BYTE, .pfn = __phys_to_pfn(S3C2410_CS2), .length = 0x10000, @@ -128,7 +118,7 @@ static void __init smdk2443_machine_init(void) MACHINE_START(SMDK2443, "SMDK2443") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - + .nr_irqs = NR_IRQS_S3C2443, .init_irq = s3c2443_init_irq, .map_io = smdk2443_map_io, .init_machine = smdk2443_machine_init, diff --git a/arch/arm/mach-s3c/mach-smdk6400.c b/arch/arm/mach-s3c/mach-smdk6400.c index 827221398d6c..a3c1b2a82455 100644 --- a/arch/arm/mach-s3c/mach-smdk6400.c +++ b/arch/arm/mach-s3c/mach-smdk6400.c @@ -22,7 +22,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/irqs.h> +#include "irqs.h" #include "map.h" #include "devs.h" diff --git a/arch/arm/mach-s3c/mach-smdk6410.c b/arch/arm/mach-s3c/mach-smdk6410.c index ae18c1375c9c..e57b2bb61484 100644 --- a/arch/arm/mach-s3c/mach-smdk6410.c +++ b/arch/arm/mach-s3c/mach-smdk6410.c @@ -45,7 +45,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/irqs.h> +#include "irqs.h" #include "map.h" #include <asm/irq.h> diff --git a/arch/arm/mach-s3c/mach-tct_hammer.c b/arch/arm/mach-s3c/mach-tct_hammer.c index 2a61df316e8c..93ab1abd8bd3 100644 --- a/arch/arm/mach-s3c/mach-tct_hammer.c +++ b/arch/arm/mach-s3c/mach-tct_hammer.c @@ -149,6 +149,7 @@ static void __init tct_hammer_init(void) MACHINE_START(TCT_HAMMER, "TCT_HAMMER") .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2410, .map_io = tct_hammer_map_io, .init_irq = s3c2410_init_irq, .init_machine = tct_hammer_init, diff --git a/arch/arm/mach-s3c/mach-vr1000.c b/arch/arm/mach-s3c/mach-vr1000.c index 5c3d07cf2e79..c85033e6ef8f 100644 --- a/arch/arm/mach-s3c/mach-vr1000.c +++ b/arch/arm/mach-s3c/mach-vr1000.c @@ -67,11 +67,6 @@ static struct map_desc vr1000_iodesc[] __initdata = { .pfn = PA_CS2(BAST_PA_ISAIO), .length = SZ_16M, .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_WORD, - .pfn = PA_CS3(BAST_PA_ISAIO), - .length = SZ_16M, - .type = MT_DEVICE, }, /* CPLD control registers, and external interrupt controls */ @@ -361,6 +356,7 @@ static void __init vr1000_init(void) MACHINE_START(VR1000, "Thorcom-VR1000") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2410, .map_io = vr1000_map_io, .init_machine = vr1000_init, .init_irq = s3c2410_init_irq, diff --git a/arch/arm/mach-s3c/mach-vstms.c b/arch/arm/mach-s3c/mach-vstms.c index ec024af7b0ce..6f878418be3e 100644 --- a/arch/arm/mach-s3c/mach-vstms.c +++ b/arch/arm/mach-s3c/mach-vstms.c @@ -156,6 +156,7 @@ static void __init vstms_init(void) MACHINE_START(VSTMS, "VSTMS") .atag_offset = 0x100, + .nr_irqs = NR_IRQS_S3C2412, .fixup = vstms_fixup, .init_irq = s3c2412_init_irq, diff --git a/arch/arm/mach-s3c/include/mach/map-base.h b/arch/arm/mach-s3c/map-base.h index 34b39ded0e2e..463a995b399b 100644 --- a/arch/arm/mach-s3c/include/mach/map-base.h +++ b/arch/arm/mach-s3c/map-base.h @@ -33,6 +33,12 @@ #define S3C_VA_WATCHDOG S3C_ADDR(0x00400000) /* watchdog */ #define S3C_VA_UART S3C_ADDR(0x01000000) /* UART */ +/* ISA device mapping for BAST to use with inb()/outb() on 8-bit I/O. + * 16-bit I/O on BAST now requires driver modifications to manually + * ioremap CS3. + */ +#define S3C24XX_VA_ISA_BYTE PCI_IOBASE + /* This is used for the CPU specific mappings that may be needed, so that * they do not need to directly used S3C_ADDR() and thus make it easier to * modify the space for mapping. diff --git a/arch/arm/mach-s3c/map-s3c24xx.h b/arch/arm/mach-s3c/map-s3c24xx.h index b5dba78a9dd7..f8d075b11d6f 100644 --- a/arch/arm/mach-s3c/map-s3c24xx.h +++ b/arch/arm/mach-s3c/map-s3c24xx.h @@ -9,7 +9,7 @@ #ifndef __ASM_ARCH_MAP_H #define __ASM_ARCH_MAP_H -#include <mach/map-base.h> +#include "map-base.h" #include "map-s3c.h" /* diff --git a/arch/arm/mach-s3c/map-s3c64xx.h b/arch/arm/mach-s3c/map-s3c64xx.h index d7740d2a77c4..9de1c58bcb06 100644 --- a/arch/arm/mach-s3c/map-s3c64xx.h +++ b/arch/arm/mach-s3c/map-s3c64xx.h @@ -11,7 +11,7 @@ #ifndef __ASM_ARCH_MAP_H #define __ASM_ARCH_MAP_H __FILE__ -#include <mach/map-base.h> +#include "map-base.h" #include "map-s3c.h" /* diff --git a/arch/arm/mach-s3c/pl080.c b/arch/arm/mach-s3c/pl080.c index 4730f080c736..0a14f77b24c1 100644 --- a/arch/arm/mach-s3c/pl080.c +++ b/arch/arm/mach-s3c/pl080.c @@ -11,7 +11,7 @@ #include <linux/of.h> #include "cpu.h" -#include <mach/irqs.h> +#include "irqs.h" #include "map.h" #include "regs-sys-s3c64xx.h" diff --git a/arch/arm/mach-s3c/pm-core-s3c24xx.h b/arch/arm/mach-s3c/pm-core-s3c24xx.h index bcb7978a4e85..a71ed5711019 100644 --- a/arch/arm/mach-s3c/pm-core-s3c24xx.h +++ b/arch/arm/mach-s3c/pm-core-s3c24xx.h @@ -12,7 +12,7 @@ #include "regs-clock.h" #include "regs-irq-s3c24xx.h" -#include <mach/irqs.h> +#include "irqs.h" static inline void s3c_pm_debug_init_uart(void) { diff --git a/arch/arm/mach-s3c/pm-s3c2412.c b/arch/arm/mach-s3c/pm-s3c2412.c index 6a9604477c9e..ed3b4cfc7c0f 100644 --- a/arch/arm/mach-s3c/pm-s3c2412.c +++ b/arch/arm/mach-s3c/pm-s3c2412.c @@ -19,7 +19,7 @@ #include <asm/cacheflush.h> #include <asm/irq.h> -#include <mach/irqs.h> +#include "irqs.h" #include "regs-gpio.h" #include "cpu.h" diff --git a/arch/arm/mach-s3c/pm-s3c64xx.c b/arch/arm/mach-s3c/pm-s3c64xx.c index 4f1778123dee..7bc7417fd803 100644 --- a/arch/arm/mach-s3c/pm-s3c64xx.c +++ b/arch/arm/mach-s3c/pm-s3c64xx.c @@ -15,7 +15,7 @@ #include <linux/pm_domain.h> #include "map.h" -#include <mach/irqs.h> +#include "irqs.h" #include "cpu.h" #include "devs.h" @@ -323,7 +323,7 @@ void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save) /* S3C64XX UART blocks only support level interrupts, so ensure that * when we restore unused UART blocks we force the level interrupt - * settigs. */ + * settings. */ save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL; /* We have a constraint on changing the clock type of the UART diff --git a/arch/arm/mach-s3c/pm.c b/arch/arm/mach-s3c/pm.c index c563bb9d92be..06f019690d81 100644 --- a/arch/arm/mach-s3c/pm.c +++ b/arch/arm/mach-s3c/pm.c @@ -21,7 +21,7 @@ #include "map.h" #include "regs-clock.h" #include "regs-irq.h" -#include <mach/irqs.h> +#include "irqs.h" #include <asm/irq.h> diff --git a/arch/arm/mach-s3c/s3c2443.c b/arch/arm/mach-s3c/s3c2443.c index 08f910144246..05c3c298b9f8 100644 --- a/arch/arm/mach-s3c/s3c2443.c +++ b/arch/arm/mach-s3c/s3c2443.c @@ -25,7 +25,7 @@ #include "map.h" #include "gpio-samsung.h" -#include <mach/irqs.h> +#include "irqs.h" #include <asm/irq.h> #include <asm/system_misc.h> diff --git a/arch/arm/mach-s3c/s3c24xx.c b/arch/arm/mach-s3c/s3c24xx.c index ccfed48c98aa..819a95364af9 100644 --- a/arch/arm/mach-s3c/s3c24xx.c +++ b/arch/arm/mach-s3c/s3c24xx.c @@ -146,7 +146,7 @@ static struct map_desc s3c_iodesc[] __initdata __maybe_unused = { IODESC_ENT(UART) }; -/* read cpu identificaiton code */ +/* read cpu identification code */ static unsigned long s3c24xx_read_idcode_v5(void) { @@ -678,3 +678,10 @@ struct platform_device s3c2410_device_dclk = { }, }; #endif + +#ifndef CONFIG_COMPILE_TEST +#pragma message "The platform is deprecated and scheduled for removal. " \ + "Please reach to the maintainers of the platform " \ + "and linux-samsung-soc@vger.kernel.org if you still use it." \ + "Without such feedback, the platform will be removed after 2022." +#endif diff --git a/arch/arm/mach-s3c/s3c24xx.h b/arch/arm/mach-s3c/s3c24xx.h index 5848bef5bb49..34dd4ac507e9 100644 --- a/arch/arm/mach-s3c/s3c24xx.h +++ b/arch/arm/mach-s3c/s3c24xx.h @@ -10,7 +10,7 @@ #define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__ #include <linux/reboot.h> -#include <mach/irqs.h> +#include "irqs.h" struct s3c2410_uartcfg; diff --git a/arch/arm/mach-s3c/s3c64xx.c b/arch/arm/mach-s3c/s3c64xx.c index 4dfb648142f2..0a8116c108fe 100644 --- a/arch/arm/mach-s3c/s3c64xx.c +++ b/arch/arm/mach-s3c/s3c64xx.c @@ -36,7 +36,7 @@ #include <asm/system_misc.h> #include "map.h" -#include <mach/irqs.h> +#include "irqs.h" #include "regs-gpio.h" #include "gpio-samsung.h" @@ -425,3 +425,10 @@ static int __init s3c64xx_init_irq_eint(void) return 0; } arch_initcall(s3c64xx_init_irq_eint); + +#ifndef CONFIG_COMPILE_TEST +#pragma message "The platform is deprecated and scheduled for removal. " \ + "Please reach to the maintainers of the platform " \ + "and linux-samsung-soc@vger.kernel.org if you still use it." \ + "Without such feedback, the platform will be removed after 2024." +#endif diff --git a/arch/arm/mach-s3c/simtec-usb.c b/arch/arm/mach-s3c/simtec-usb.c index 18fe0642743a..76cedb5c7373 100644 --- a/arch/arm/mach-s3c/simtec-usb.c +++ b/arch/arm/mach-s3c/simtec-usb.c @@ -24,7 +24,7 @@ #include <asm/mach/irq.h> #include "gpio-samsung.h" -#include <mach/irqs.h> +#include "irqs.h" #include <asm/irq.h> #include <linux/platform_data/usb-ohci-s3c2410.h> diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 4dfb7554649d..6c21f214cd60 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -39,9 +39,6 @@ #include "generic.h" #include <clocksource/pxa.h> -unsigned int reset_status; -EXPORT_SYMBOL(reset_status); - #define NR_FREQS 16 /* @@ -319,10 +316,13 @@ static struct platform_device *sa11x0_devices[] __initdata = { static int __init sa1100_init(void) { + struct resource wdt_res = DEFINE_RES_MEM(0x90000000, 0x20); pm_power_off = sa1100_power_off; regulator_has_full_constraints(); + platform_device_register_simple("sa1100_wdt", -1, &wdt_res, 1); + return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices)); } diff --git a/arch/arm/mach-sa1100/include/mach/reset.h b/arch/arm/mach-sa1100/include/mach/reset.h index 27695650a567..a6723d45ae2a 100644 --- a/arch/arm/mach-sa1100/include/mach/reset.h +++ b/arch/arm/mach-sa1100/include/mach/reset.h @@ -10,7 +10,6 @@ #define RESET_STATUS_GPIO (1 << 3) /* GPIO Reset */ #define RESET_STATUS_ALL (0xf) -extern unsigned int reset_status; static inline void clear_reset_status(unsigned int mask) { RCSR = mask; diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c index 09ef73b99dd8..abea41f7782e 100644 --- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c +++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c @@ -67,7 +67,7 @@ static const struct of_device_id rcar_gen2_quirk_match[] = { { .compatible = "dlg,da9063", .data = &da9063_msg }, { .compatible = "dlg,da9063l", .data = &da9063_msg }, { .compatible = "dlg,da9210", .data = &da9210_msg }, - {}, + { /* sentinel */ } }; static int regulator_quirk_notify(struct notifier_block *nb, diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index a328d2f52678..ed82d6429623 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -16,7 +16,7 @@ static const char *const emev2_boards_compat_dt[] __initconst = { "renesas,emev2", - NULL, + NULL }; DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c index 14867226f8f4..a70b99495e2e 100644 --- a/arch/arm/mach-shmobile/setup-r7s72100.c +++ b/arch/arm/mach-shmobile/setup-r7s72100.c @@ -14,7 +14,7 @@ static const char *const r7s72100_boards_compat_dt[] __initconst = { "renesas,r7s72100", - NULL, + NULL }; DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)") diff --git a/arch/arm/mach-shmobile/setup-r7s9210.c b/arch/arm/mach-shmobile/setup-r7s9210.c index 573fb9955e7e..90add728bc3d 100644 --- a/arch/arm/mach-shmobile/setup-r7s9210.c +++ b/arch/arm/mach-shmobile/setup-r7s9210.c @@ -15,7 +15,7 @@ static const char *const r7s9210_boards_compat_dt[] __initconst = { "renesas,r7s9210", - NULL, + NULL }; DT_MACHINE_START(R7S72100_DT, "Generic R7S9210 (Flattened Device Tree)") diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c index 23a29a0ea9c9..9e3f4dc08372 100644 --- a/arch/arm/mach-shmobile/setup-r8a73a4.c +++ b/arch/arm/mach-shmobile/setup-r8a73a4.c @@ -14,7 +14,7 @@ static const char *const r8a73a4_boards_compat_dt[] __initconst = { "renesas,r8a73a4", - NULL, + NULL }; DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)") diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index f760c27c9907..9ac2b8a2aa6a 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -72,7 +72,7 @@ static void __init r8a7740_generic_init(void) static const char *const r8a7740_boards_compat_dt[] __initconst = { "renesas,r8a7740", - NULL, + NULL }; DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)") diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 02cda9cada4c..445017e8cfe8 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -43,7 +43,7 @@ static void __init r8a7778_init_irq_dt(void) static const char *const r8a7778_compat_dt[] __initconst = { "renesas,r8a7778", - NULL, + NULL }; DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)") diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index b6e282116d66..c3af2c8925ba 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -49,7 +49,7 @@ static void __init r8a7779_init_irq_dt(void) static const char *const r8a7779_compat_dt[] __initconst = { "renesas,r8a7779", - NULL, + NULL }; DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)") diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index d42d93443f2f..3edbf0719fb3 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -199,7 +199,7 @@ static const char * const rcar_gen2_boards_compat_dt[] __initconst = { "renesas,r8a7792", "renesas,r8a7793", "renesas,r8a7794", - NULL, + NULL }; DT_MACHINE_START(RCAR_GEN2_DT, "Generic R-Car Gen2 (Flattened Device Tree)") @@ -215,7 +215,7 @@ static const char * const rz_g1_boards_compat_dt[] __initconst = { "renesas,r8a7744", "renesas,r8a7745", "renesas,r8a77470", - NULL, + NULL }; DT_MACHINE_START(RZ_G1_DT, "Generic RZ/G1 (Flattened Device Tree)") diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 890bf537b7de..7fb27240e907 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -32,7 +32,7 @@ static void __init sh73a0_generic_init(void) static const char *const sh73a0_boards_compat_dt[] __initconst = { "renesas,sh73a0", - NULL, + NULL }; DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)") diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 594edf9bbea4..eb72c240c248 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -3,7 +3,6 @@ menuconfig ARCH_INTEL_SOCFPGA bool "Altera SOCFPGA family" depends on ARCH_MULTI_V7 select ARCH_HAS_RESET_CONTROLLER - select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_GIC select CACHE_L2X0 diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig index 20e284563a80..1add7ee49b63 100644 --- a/arch/arm/mach-spear/Kconfig +++ b/arch/arm/mach-spear/Kconfig @@ -5,7 +5,7 @@ menuconfig PLAT_SPEAR bool "ST SPEAr Family" - depends on ARCH_MULTI_V7 || ARCH_MULTI_V5 + depends on ARCH_MULTI_V7 || (ARCH_MULTI_V5 && CPU_LITTLE_ENDIAN) select ARM_AMBA select CLKSRC_MMIO select GPIOLIB diff --git a/arch/arm/mach-spear/Makefile b/arch/arm/mach-spear/Makefile index 176b14f83089..c6101a843601 100644 --- a/arch/arm/mach-spear/Makefile +++ b/arch/arm/mach-spear/Makefile @@ -3,8 +3,6 @@ # SPEAr Platform specific Makefile # -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include - # Common support obj-y := restart.o time.o diff --git a/arch/arm/mach-spear/include/mach/irqs.h b/arch/arm/mach-spear/include/mach/irqs.h deleted file mode 100644 index 7058720c5278..000000000000 --- a/arch/arm/mach-spear/include/mach/irqs.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * IRQ helper macros for spear machine family - * - * Copyright (C) 2009-2012 ST Microelectronics - * Rajeev Kumar <rajeev-dlh.kumar@st.com> - * Viresh Kumar <vireshk@kernel.org> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_IRQS_H -#define __MACH_IRQS_H - -#ifdef CONFIG_ARCH_SPEAR3XX -#define NR_IRQS 256 -#endif - -#ifdef CONFIG_ARCH_SPEAR6XX -/* IRQ definitions */ -/* VIC 1 */ -#define IRQ_VIC_END 64 - -/* GPIO pins virtual irqs */ -#define VIRTUAL_IRQS 24 -#define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS) -#endif - -#ifdef CONFIG_ARCH_SPEAR13XX -#define IRQ_GIC_END 160 -#define NR_IRQS IRQ_GIC_END -#endif - -#endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear/include/mach/uncompress.h b/arch/arm/mach-spear/include/mach/uncompress.h deleted file mode 100644 index 8439b9c12edb..000000000000 --- a/arch/arm/mach-spear/include/mach/uncompress.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/uncompress.h - * - * Serial port stubs for kernel decompress status messages - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <vireshk@kernel.org> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/io.h> -#include <linux/amba/serial.h> -#include <mach/spear.h> - -#ifndef __PLAT_UNCOMPRESS_H -#define __PLAT_UNCOMPRESS_H -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - void __iomem *base = (void __iomem *)SPEAR_DBG_UART_BASE; - - while (readl_relaxed(base + UART01x_FR) & UART01x_FR_TXFF) - barrier(); - - writel_relaxed(c, base + UART01x_DR); -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() - -#endif /* __PLAT_UNCOMPRESS_H */ diff --git a/arch/arm/mach-spear/include/mach/misc_regs.h b/arch/arm/mach-spear/misc_regs.h index cfaf7c665b58..53cd74301f58 100644 --- a/arch/arm/mach-spear/include/mach/misc_regs.h +++ b/arch/arm/mach-spear/misc_regs.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-spear3xx/include/mach/misc_regs.h - * * Miscellaneous registers definitions for SPEAr3xx machine family * * Copyright (C) 2009 ST Microelectronics @@ -14,7 +12,7 @@ #ifndef __MACH_MISC_REGS_H #define __MACH_MISC_REGS_H -#include <mach/spear.h> +#include "spear.h" #define MISC_BASE (VA_SPEAR_ICM3_MISC_REG_BASE) #define DMA_CHN_CFG (MISC_BASE + 0x0A0) diff --git a/arch/arm/mach-spear/pl080.c b/arch/arm/mach-spear/pl080.c index b4529f3e0ee9..38b479f413dc 100644 --- a/arch/arm/mach-spear/pl080.c +++ b/arch/arm/mach-spear/pl080.c @@ -17,8 +17,8 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/spinlock_types.h> -#include <mach/spear.h> -#include <mach/misc_regs.h> +#include "spear.h" +#include "misc_regs.h" static spinlock_t lock = __SPIN_LOCK_UNLOCKED(x); diff --git a/arch/arm/mach-spear/platsmp.c b/arch/arm/mach-spear/platsmp.c index e33a85c28c95..97fbda998df9 100644 --- a/arch/arm/mach-spear/platsmp.c +++ b/arch/arm/mach-spear/platsmp.c @@ -14,7 +14,7 @@ #include <linux/smp.h> #include <asm/cacheflush.h> #include <asm/smp_scu.h> -#include <mach/spear.h> +#include "spear.h" #include "generic.h" /* XXX spear_pen_release is cargo culted code - DO NOT COPY XXX */ diff --git a/arch/arm/mach-spear/restart.c b/arch/arm/mach-spear/restart.c index b4342155a783..43417d0db6d9 100644 --- a/arch/arm/mach-spear/restart.c +++ b/arch/arm/mach-spear/restart.c @@ -14,7 +14,7 @@ #include <linux/amba/sp810.h> #include <linux/reboot.h> #include <asm/system_misc.h> -#include <mach/spear.h> +#include "spear.h" #include "generic.h" #define SPEAR13XX_SYS_SW_RES (VA_MISC_BASE + 0x204) diff --git a/arch/arm/mach-spear/include/mach/spear.h b/arch/arm/mach-spear/spear.h index 5ed841ccf8a3..5ed841ccf8a3 100644 --- a/arch/arm/mach-spear/include/mach/spear.h +++ b/arch/arm/mach-spear/spear.h diff --git a/arch/arm/mach-spear/spear1310.c b/arch/arm/mach-spear/spear1310.c index a7d4f136836f..549ab2be1b74 100644 --- a/arch/arm/mach-spear/spear1310.c +++ b/arch/arm/mach-spear/spear1310.c @@ -18,7 +18,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "generic.h" -#include <mach/spear.h> +#include "spear.h" /* Base addresses */ #define SPEAR1310_RAS_GRP1_BASE UL(0xD8000000) diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c index b38391e9d8bf..9d4bdce2e865 100644 --- a/arch/arm/mach-spear/spear13xx.c +++ b/arch/arm/mach-spear/spear13xx.c @@ -21,7 +21,7 @@ #include <linux/of.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> -#include <mach/spear.h> +#include "spear.h" #include "generic.h" void __init spear13xx_l2x0_init(void) diff --git a/arch/arm/mach-spear/spear300.c b/arch/arm/mach-spear/spear300.c index 325b89579be1..1f2a6bbcf096 100644 --- a/arch/arm/mach-spear/spear300.c +++ b/arch/arm/mach-spear/spear300.c @@ -17,7 +17,7 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> #include "generic.h" -#include <mach/spear.h> +#include "spear.h" /* DMAC platform data's slave info */ struct pl08x_channel_data spear300_dma_info[] = { diff --git a/arch/arm/mach-spear/spear310.c b/arch/arm/mach-spear/spear310.c index 59e173dc85cf..f0fc140a59cf 100644 --- a/arch/arm/mach-spear/spear310.c +++ b/arch/arm/mach-spear/spear310.c @@ -18,7 +18,7 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> #include "generic.h" -#include <mach/spear.h> +#include "spear.h" #define SPEAR310_UART1_BASE UL(0xB2000000) #define SPEAR310_UART2_BASE UL(0xB2080000) diff --git a/arch/arm/mach-spear/spear320.c b/arch/arm/mach-spear/spear320.c index 926d5a243238..cb464ae7c08a 100644 --- a/arch/arm/mach-spear/spear320.c +++ b/arch/arm/mach-spear/spear320.c @@ -20,7 +20,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "generic.h" -#include <mach/spear.h> +#include "spear.h" #define SPEAR320_UART1_BASE UL(0xA3000000) #define SPEAR320_UART2_BASE UL(0xA4000000) diff --git a/arch/arm/mach-spear/spear3xx.c b/arch/arm/mach-spear/spear3xx.c index f83321d5e353..fab3d6df69ff 100644 --- a/arch/arm/mach-spear/spear3xx.c +++ b/arch/arm/mach-spear/spear3xx.c @@ -20,8 +20,8 @@ #include <asm/mach/map.h> #include "pl080.h" #include "generic.h" -#include <mach/spear.h> -#include <mach/misc_regs.h> +#include "spear.h" +#include "misc_regs.h" /* ssp device registration */ struct pl022_ssp_controller pl022_plat_data = { diff --git a/arch/arm/mach-spear/spear6xx.c b/arch/arm/mach-spear/spear6xx.c index c5fc110134ba..d061080b191f 100644 --- a/arch/arm/mach-spear/spear6xx.c +++ b/arch/arm/mach-spear/spear6xx.c @@ -25,8 +25,8 @@ #include <asm/mach/map.h> #include "pl080.h" #include "generic.h" -#include <mach/spear.h> -#include <mach/misc_regs.h> +#include "spear.h" +#include "misc_regs.h" /* dmac device registration */ static struct pl08x_channel_data spear600_dma_info[] = { diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index e5c2fce281cd..e015f2497111 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,13 +1,10 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_SUNXI bool "Allwinner SoCs" - depends on ARCH_MULTI_V5 || ARCH_MULTI_V7 + depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V7 select ARCH_HAS_RESET_CONTROLLER select CLKSRC_MMIO - select GENERIC_IRQ_CHIP select GPIOLIB - select IRQ_DOMAIN_HIERARCHY - select IRQ_FASTEOI_HIERARCHY_HANDLERS select PINCTRL select PM_OPP select SUN4I_TIMER @@ -22,10 +19,12 @@ if ARCH_MULTI_V7 config MACH_SUN4I bool "Allwinner A10 (sun4i) SoCs support" default ARCH_SUNXI + select SUN4I_INTC config MACH_SUN5I bool "Allwinner A10s / A13 (sun5i) SoCs support" default ARCH_SUNXI + select SUN4I_INTC select SUN5I_HSTIMER config MACH_SUN6I @@ -34,26 +33,31 @@ config MACH_SUN6I select ARM_GIC select MFD_SUN6I_PRCM select SUN5I_HSTIMER + select SUN6I_R_INTC + select SUNXI_NMI_INTC config MACH_SUN7I bool "Allwinner A20 (sun7i) SoCs support" default ARCH_SUNXI select ARM_GIC select ARM_PSCI - select ARCH_SUPPORTS_BIG_ENDIAN select HAVE_ARM_ARCH_TIMER select SUN5I_HSTIMER + select SUNXI_NMI_INTC config MACH_SUN8I bool "Allwinner sun8i Family SoCs support" default ARCH_SUNXI select ARM_GIC select MFD_SUN6I_PRCM + select SUN6I_R_INTC + select SUNXI_NMI_INTC config MACH_SUN9I bool "Allwinner (sun9i) SoCs support" default ARCH_SUNXI select ARM_GIC + select SUNXI_NMI_INTC config ARCH_SUNXI_MC_SMP bool @@ -69,6 +73,7 @@ if ARCH_MULTI_V5 config MACH_SUNIV bool "Allwinner ARMv5 F-series (suniv) SoCs support" default ARCH_SUNXI + select SUN4I_INTC help Support for Allwinner suniv ARMv5 SoCs. (F1C100A, F1C100s, F1C200s, F1C500, F1C600) diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index e6911a14c096..1f57e7c0feae 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -83,7 +83,7 @@ static int tegra30_boot_secondary(unsigned int cpu, struct task_struct *idle) * For warm boot CPU that was resumed from CPU hotplug, the * power will be resumed automatically after un-halting the * flow controller of the warm boot CPU. We need to wait for - * the confirmaiton that the CPU is powered then removing + * the confirmation that the CPU is powered then removing * the IO clamps. * For cold boot CPU, do not wait. After the cold boot CPU be * booted, it will run to tegra_secondary_init() and set diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig index f78a1d358031..2ef226194c3a 100644 --- a/arch/arm/mach-versatile/Kconfig +++ b/arch/arm/mach-versatile/Kconfig @@ -2,6 +2,7 @@ config ARCH_VERSATILE bool "ARM Ltd. Versatile family" depends on ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN select ARM_AMBA select ARM_TIMER_SP804 select ARM_VIC @@ -16,3 +17,311 @@ config ARCH_VERSATILE help This enables support for ARM Ltd Versatile board. +menuconfig ARCH_INTEGRATOR + bool "ARM Ltd. Integrator family" + depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6 + depends on CPU_LITTLE_ENDIAN || ARCH_MULTI_V6 + select ARM_AMBA + select CMA + select DMA_CMA + select HAVE_TCM + select CLK_ICST + select MFD_SYSCON + select PLAT_VERSATILE + select POWER_RESET + select POWER_RESET_VERSATILE + select POWER_SUPPLY + select SOC_INTEGRATOR_CM + select VERSATILE_FPGA_IRQ + help + Support for ARM's Integrator platform. + +if ARCH_INTEGRATOR + +config ARCH_INTEGRATOR_AP + bool "Support Integrator/AP and Integrator/PP2 platforms" + select INTEGRATOR_AP_TIMER + select SERIAL_AMBA_PL010 if TTY + select SERIAL_AMBA_PL010_CONSOLE if TTY + select SOC_BUS + help + Include support for the ARM(R) Integrator/AP and + Integrator/PP2 platforms. + +config INTEGRATOR_IMPD1 + bool "Include support for Integrator/IM-PD1" + depends on ARCH_INTEGRATOR_AP + select ARM_VIC + select GPIO_PL061 + select GPIOLIB + select REGULATOR + select REGULATOR_FIXED_VOLTAGE + help + The IM-PD1 is an add-on logic module for the Integrator which + allows ARM(R) Ltd PrimeCells to be developed and evaluated. + The IM-PD1 can be found on the Integrator/PP2 platform. + +config INTEGRATOR_CM720T + bool "Integrator/CM720T core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V4T + select CPU_ARM720T + +config INTEGRATOR_CM920T + bool "Integrator/CM920T core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V4T + select CPU_ARM920T + +config INTEGRATOR_CM922T_XA10 + bool "Integrator/CM922T-XA10 core module" + depends on ARCH_MULTI_V4T + depends on ARCH_INTEGRATOR_AP + select CPU_ARM922T + +config INTEGRATOR_CM926EJS + bool "Integrator/CM926EJ-S core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V5 + select CPU_ARM926T + +config INTEGRATOR_CM10200E_REV0 + bool "Integrator/CM10200E rev.0 core module" + depends on ARCH_INTEGRATOR_AP && n + depends on ARCH_MULTI_V5 + select CPU_ARM1020 + +config INTEGRATOR_CM10200E + bool "Integrator/CM10200E core module" + depends on ARCH_INTEGRATOR_AP && n + depends on ARCH_MULTI_V5 + select CPU_ARM1020E + +config INTEGRATOR_CM10220E + bool "Integrator/CM10220E core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V5 + select CPU_ARM1022 + +config INTEGRATOR_CM1026EJS + bool "Integrator/CM1026EJ-S core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V5 + select CPU_ARM1026 + +config INTEGRATOR_CM1136JFS + bool "Integrator/CM1136JF-S core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V6 + select CPU_V6 + +config ARCH_INTEGRATOR_CP + bool "Support Integrator/CP platform" + depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 + select ARM_TIMER_SP804 + select SERIAL_AMBA_PL011 if TTY + select SERIAL_AMBA_PL011_CONSOLE if TTY + select SOC_BUS + help + Include support for the ARM(R) Integrator CP platform. + +config INTEGRATOR_CT926 + bool "Integrator/CT926 (ARM926EJ-S) core tile" + depends on ARCH_INTEGRATOR_CP + depends on ARCH_MULTI_V5 + select CPU_ARM926T + +config INTEGRATOR_CTB36 + bool "Integrator/CTB36 (ARM1136JF-S) core tile" + depends on ARCH_INTEGRATOR_CP + depends on ARCH_MULTI_V6 + select CPU_V6 + +config ARCH_CINTEGRATOR + depends on ARCH_INTEGRATOR_CP + def_bool y + +endif + +menuconfig ARCH_REALVIEW + bool "ARM Ltd. RealView family" + depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V6 || ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select ARM_TIMER_SP804 + select CLK_SP810 + select GPIO_PL061 if GPIOLIB + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select HAVE_PATA_PLATFORM + select HAVE_TCM + select CLK_ICST + select MACH_REALVIEW_EB if ARCH_MULTI_V5 + select MFD_SYSCON + select PLAT_VERSATILE + select POWER_RESET + select POWER_RESET_VERSATILE + select POWER_SUPPLY + select SOC_REALVIEW + help + This enables support for ARM Ltd RealView boards. + +if ARCH_REALVIEW + +config MACH_REALVIEW_EB + bool "Support RealView(R) Emulation Baseboard" + select ARM_GIC + select CPU_ARM926T if ARCH_MULTI_V5 + help + Include support for the ARM(R) RealView(R) Emulation Baseboard + platform. On an ARMv5 kernel, this will include support for + the ARM926EJ-S core tile, while on an ARMv6/v7 kernel, at least + one of the ARM1136, ARM1176, ARM11MPCore or Cortex-A9MPCore + core tile options should be enabled. + +config REALVIEW_EB_ARM1136 + bool "Support ARM1136J(F)-S Tile" + depends on MACH_REALVIEW_EB && ARCH_MULTI_V6 + select CPU_V6 + help + Enable support for the ARM1136 tile fitted to the + Realview(R) Emulation Baseboard platform. + +config REALVIEW_EB_ARM1176 + bool "Support ARM1176JZ(F)-S Tile" + depends on MACH_REALVIEW_EB && ARCH_MULTI_V6 + help + Enable support for the ARM1176 tile fitted to the + Realview(R) Emulation Baseboard platform. + +config REALVIEW_EB_A9MP + bool "Support Multicore Cortex-A9 Tile" + depends on MACH_REALVIEW_EB && ARCH_MULTI_V7 + help + Enable support for the Cortex-A9MPCore tile fitted to the + Realview(R) Emulation Baseboard platform. + +config REALVIEW_EB_ARM11MP + bool "Support ARM11MPCore Tile" + depends on MACH_REALVIEW_EB && ARCH_MULTI_V6 + select HAVE_SMP + help + Enable support for the ARM11MPCore tile fitted to the Realview(R) + Emulation Baseboard platform. + +config MACH_REALVIEW_PB11MP + bool "Support RealView(R) Platform Baseboard for ARM11MPCore" + depends on ARCH_MULTI_V6 + select HAVE_SMP + help + Include support for the ARM(R) RealView(R) Platform Baseboard for + the ARM11MPCore. This platform has an on-board ARM11MPCore and has + support for PCI-E and Compact Flash. + +# ARMv6 CPU without K extensions, but does have the new exclusive ops +config MACH_REALVIEW_PB1176 + bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S" + depends on ARCH_MULTI_V6 + select CPU_V6 + select HAVE_TCM + help + Include support for the ARM(R) RealView(R) Platform Baseboard for + ARM1176JZF-S. + +config MACH_REALVIEW_PBA8 + bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform" + depends on ARCH_MULTI_V7 + help + Include support for the ARM(R) RealView Platform Baseboard for + Cortex(tm)-A8. This platform has an on-board Cortex-A8 and has + support for PCI-E and Compact Flash. + +config MACH_REALVIEW_PBX + bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9" + depends on ARCH_MULTI_V7 + select ZONE_DMA + help + Include support for the ARM(R) RealView(R) Platform Baseboard + Explore. + +endif + +menuconfig ARCH_VEXPRESS + bool "ARM Ltd. Versatile Express family" + depends on ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select ARM_GLOBAL_TIMER + select ARM_TIMER_SP804 + select GPIOLIB + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select HAVE_PATA_PLATFORM + select CLK_ICST + select NO_IOPORT_MAP + select PLAT_VERSATILE + select POWER_RESET + select POWER_RESET_VEXPRESS + select POWER_SUPPLY + select REGULATOR if MMC_ARMMMCI + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select VEXPRESS_CONFIG + help + This option enables support for systems using Cortex processor based + ARM core and logic (FPGA) tiles on the Versatile Express motherboard, + for example: + + - CoreTile Express A5x2 (V2P-CA5s) + - CoreTile Express A9x4 (V2P-CA9) + - CoreTile Express A15x2 (V2P-CA15) + - LogicTile Express 13MG (V2F-2XV6) with A5, A7, A9 or A15 SMMs + (Soft Macrocell Models) + - Versatile Express RTSMs (Models) + + You must boot using a Flattened Device Tree in order to use these + platforms. The traditional (ATAGs) boot method is not usable on + these boards with this option. + +if ARCH_VEXPRESS + +config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA + bool "Enable A5 and A9 only errata work-arounds" + default y + select ARM_ERRATA_643719 if SMP + select ARM_ERRATA_720789 + select PL310_ERRATA_753970 if CACHE_L2X0 + help + Provides common dependencies for Versatile Express platforms + based on Cortex-A5 and Cortex-A9 processors. In order to + build a working kernel, you must also enable relevant core + tile support or Flattened Device Tree based support options. + +config ARCH_VEXPRESS_DCSCB + bool "Dual Cluster System Control Block (DCSCB) support" + depends on MCPM + select ARM_CCI400_PORT_CTRL + help + Support for the Dual Cluster System Configuration Block (DCSCB). + This is needed to provide CPU and cluster power management + on RTSM implementing big.LITTLE. + +config ARCH_VEXPRESS_SPC + bool "Versatile Express Serial Power Controller (SPC)" + select PM_OPP + help + The TC2 (A15x2 A7x3) versatile express core tile integrates a logic + block called Serial Power Controller (SPC) that provides the interface + between the dual cluster test-chip and the M3 microcontroller that + carries out power management. + +config ARCH_VEXPRESS_TC2_PM + bool "Versatile Express TC2 power management" + depends on MCPM + select ARM_CCI400_PORT_CTRL + select ARCH_VEXPRESS_SPC + select ARM_CPU_SUSPEND + help + Support for CPU and cluster power management on Versatile Express + with a TC2 (A15x2 A7x3) big.LITTLE core tile. + +endif diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile index 2b907718d467..27d712bcf1af 100644 --- a/arch/arm/mach-versatile/Makefile +++ b/arch/arm/mach-versatile/Makefile @@ -3,4 +3,34 @@ # Makefile for the linux kernel. # -obj-y := versatile_dt.o +# versatile +obj-$(CONFIG_ARCH_VERSATILE) += versatile.o + +# integrator +obj-$(CONFIG_ARCH_INTEGRATOR) += integrator.o +obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o +obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o + +# realview +obj-$(CONFIG_ARCH_REALVIEW) += realview.o + +# vexpress +obj-$(CONFIG_ARCH_VEXPRESS) := v2m.o +obj-$(CONFIG_ARCH_VEXPRESS_DCSCB) += dcscb.o dcscb_setup.o +CFLAGS_dcscb.o += -march=armv7-a +CFLAGS_REMOVE_dcscb.o = -pg +obj-$(CONFIG_ARCH_VEXPRESS_SPC) += spc.o +CFLAGS_REMOVE_spc.o = -pg +obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM) += tc2_pm.o +CFLAGS_tc2_pm.o += -march=armv7-a +CFLAGS_REMOVE_tc2_pm.o = -pg + +# mps2 +obj-$(CONFIG_ARCH_MPS2) += v2m-mps2.o + +ifdef CONFIG_SMP +obj-y += headsmp.o platsmp.o +obj-$(CONFIG_ARCH_REALVIEW) += platsmp-realview.o +obj-$(CONFIG_ARCH_VEXPRESS) += platsmp-vexpress.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +endif diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-versatile/Makefile.boot index cec195d4fcba..cec195d4fcba 100644 --- a/arch/arm/mach-vexpress/Makefile.boot +++ b/arch/arm/mach-versatile/Makefile.boot diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-versatile/dcscb.c index a0554d7d04f7..d8797350996d 100644 --- a/arch/arm/mach-vexpress/dcscb.c +++ b/arch/arm/mach-versatile/dcscb.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * arch/arm/mach-vexpress/dcscb.c - Dual Cluster System Configuration Block + * dcscb.c - Dual Cluster System Configuration Block * * Created by: Nicolas Pitre, May 2012 * Copyright: (C) 2012-2013 Linaro Limited @@ -20,7 +20,7 @@ #include <asm/cputype.h> #include <asm/cp15.h> -#include "core.h" +#include "vexpress.h" #define RST_HOLD0 0x0 #define RST_HOLD1 0x4 @@ -144,6 +144,7 @@ static int __init dcscb_init(void) if (!node) return -ENODEV; dcscb_base = of_iomap(node, 0); + of_node_put(node); if (!dcscb_base) return -EADDRNOTAVAIL; cfg = readl_relaxed(dcscb_base + DCS_CFG_R); diff --git a/arch/arm/mach-vexpress/dcscb_setup.S b/arch/arm/mach-versatile/dcscb_setup.S index 0614b2ebd354..92d1fd9d7f6a 100644 --- a/arch/arm/mach-vexpress/dcscb_setup.S +++ b/arch/arm/mach-versatile/dcscb_setup.S @@ -1,7 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * arch/arm/include/asm/dcscb_setup.S - * * Created by: Dave Martin, 2012-06-22 * Copyright: (C) 2012-2013 Linaro Limited */ diff --git a/arch/arm/plat-versatile/headsmp.S b/arch/arm/mach-versatile/headsmp.S index 09d9fc30c8ca..99c32db412ae 100644 --- a/arch/arm/plat-versatile/headsmp.S +++ b/arch/arm/mach-versatile/headsmp.S @@ -1,7 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * linux/arch/arm/plat-versatile/headsmp.S - * * Copyright (c) 2003 ARM Limited * All Rights Reserved */ diff --git a/arch/arm/plat-versatile/hotplug.c b/arch/arm/mach-versatile/hotplug.c index 2e9dca38bec0..5a152175578b 100644 --- a/arch/arm/plat-versatile/hotplug.c +++ b/arch/arm/mach-versatile/hotplug.c @@ -15,7 +15,7 @@ #include <asm/smp_plat.h> #include <asm/cp15.h> -#include <plat/platsmp.h> +#include "platsmp.h" static inline void versatile_immitation_enter_lowpower(unsigned int actrl_mask) { diff --git a/arch/arm/mach-integrator/cm.h b/arch/arm/mach-versatile/integrator-cm.h index f09ea18a50f8..f09ea18a50f8 100644 --- a/arch/arm/mach-integrator/cm.h +++ b/arch/arm/mach-versatile/integrator-cm.h diff --git a/arch/arm/mach-integrator/hardware.h b/arch/arm/mach-versatile/integrator-hardware.h index 81ce09e3ad45..81ce09e3ad45 100644 --- a/arch/arm/mach-integrator/hardware.h +++ b/arch/arm/mach-versatile/integrator-hardware.h diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-versatile/integrator.c index 0fe5e1dc9d89..fdf9c4db08a7 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-versatile/integrator.c @@ -1,7 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * linux/arch/arm/mach-integrator/core.c - * * Copyright (C) 2000-2003 Deep Blue Solutions Ltd */ #include <linux/types.h> @@ -26,9 +24,9 @@ #include <asm/mach-types.h> #include <asm/mach/time.h> -#include "hardware.h" -#include "cm.h" -#include "common.h" +#include "integrator-hardware.h" +#include "integrator-cm.h" +#include "integrator.h" static DEFINE_RAW_SPINLOCK(cm_lock); static void __iomem *cm_base; diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-versatile/integrator.h index f053aeebeb7a..f053aeebeb7a 100644 --- a/arch/arm/mach-integrator/common.h +++ b/arch/arm/mach-versatile/integrator.h diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-versatile/integrator_ap.c index 58b02cbbea72..e216fac917d0 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-versatile/integrator_ap.c @@ -1,7 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * linux/arch/arm/mach-integrator/integrator_ap.c - * * Copyright (C) 2000-2003 Deep Blue Solutions Ltd */ #include <linux/kernel.h> @@ -20,9 +18,9 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "hardware.h" -#include "cm.h" -#include "common.h" +#include "integrator-hardware.h" +#include "integrator-cm.h" +#include "integrator.h" /* Regmap to the AP system controller */ static struct regmap *ap_syscon_map; @@ -147,10 +145,6 @@ struct amba_pl010_data ap_uart_data = { .set_mctrl = integrator_uart_set_mctrl, }; -void __init ap_init_early(void) -{ -} - static void __init ap_init_irq_of(void) { cm_init(); @@ -195,7 +189,6 @@ static const char * ap_dt_board_compat[] = { DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)") .reserve = integrator_reserve, .map_io = ap_map_io, - .init_early = ap_init_early, .init_irq = ap_init_irq_of, .init_machine = ap_init_of, .dt_compat = ap_dt_board_compat, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-versatile/integrator_cp.c index b7eb4038798b..2ed4ded56b3f 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-versatile/integrator_cp.c @@ -1,7 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * linux/arch/arm/mach-integrator/integrator_cp.c - * * Copyright (C) 2003 Deep Blue Solutions Ltd */ #include <linux/kernel.h> @@ -18,9 +16,9 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "hardware.h" -#include "cm.h" -#include "common.h" +#include "integrator-hardware.h" +#include "integrator-cm.h" +#include "integrator.h" /* Base address to the core module header */ static struct regmap *cm_map; diff --git a/arch/arm/mach-realview/platsmp-dt.c b/arch/arm/mach-versatile/platsmp-realview.c index 5ae783767a5d..5d363385c801 100644 --- a/arch/arm/mach-realview/platsmp-dt.c +++ b/arch/arm/mach-versatile/platsmp-realview.c @@ -13,7 +13,7 @@ #include <asm/smp_plat.h> #include <asm/smp_scu.h> -#include <plat/platsmp.h> +#include "platsmp.h" #define REALVIEW_SYS_FLAGSSET_OFFSET 0x30 diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-versatile/platsmp-vexpress.c index 99c93124aa68..1ee3c45e71c9 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-versatile/platsmp-vexpress.c @@ -1,7 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * linux/arch/arm/mach-vexpress/platsmp.c - * * Copyright (C) 2002 ARM Ltd. * All Rights Reserved */ @@ -16,9 +14,8 @@ #include <asm/smp_scu.h> #include <asm/mach/map.h> -#include <plat/platsmp.h> - -#include "core.h" +#include "platsmp.h" +#include "vexpress.h" bool __init vexpress_smp_init_ops(void) { diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/mach-versatile/platsmp.c index 3567296cec2a..fa7378321e23 100644 --- a/arch/arm/plat-versatile/platsmp.c +++ b/arch/arm/mach-versatile/platsmp.c @@ -1,7 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * linux/arch/arm/plat-versatile/platsmp.c - * * Copyright (C) 2002 ARM Ltd. * All Rights Reserved * @@ -20,7 +18,7 @@ #include <asm/cacheflush.h> #include <asm/smp_plat.h> -#include <plat/platsmp.h> +#include "platsmp.h" /* * versatile_cpu_release controls the release of CPUs from the holding diff --git a/arch/arm/plat-versatile/include/plat/platsmp.h b/arch/arm/mach-versatile/platsmp.h index 500605f48b80..171a0ab72220 100644 --- a/arch/arm/plat-versatile/include/plat/platsmp.h +++ b/arch/arm/mach-versatile/platsmp.h @@ -1,7 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * linux/arch/arm/plat-versatile/include/plat/platsmp.h - * * Copyright (C) 2011 ARM Ltd. * All Rights Reserved */ diff --git a/arch/arm/mach-realview/realview-dt.c b/arch/arm/mach-versatile/realview.c index feab66080ba2..feab66080ba2 100644 --- a/arch/arm/mach-realview/realview-dt.c +++ b/arch/arm/mach-versatile/realview.c diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-versatile/spc.c index 1da11bdb1dfb..6e6985e756af 100644 --- a/arch/arm/mach-vexpress/spc.c +++ b/arch/arm/mach-versatile/spc.c @@ -122,13 +122,13 @@ static inline bool cluster_is_a15(u32 cluster) } /** - * ve_spc_global_wakeup_irq() + * ve_spc_global_wakeup_irq() - sets/clears global wakeup IRQs + * + * @set: if true, global wake-up IRQs are set, if false they are cleared * * Function to set/clear global wakeup IRQs. Not protected by locking since * it might be used in code paths where normal cacheable locks are not * working. Locking must be provided by the caller to ensure atomicity. - * - * @set: if true, global wake-up IRQs are set, if false they are cleared */ void ve_spc_global_wakeup_irq(bool set) { @@ -145,15 +145,15 @@ void ve_spc_global_wakeup_irq(bool set) } /** - * ve_spc_cpu_wakeup_irq() - * - * Function to set/clear per-CPU wake-up IRQs. Not protected by locking since - * it might be used in code paths where normal cacheable locks are not - * working. Locking must be provided by the caller to ensure atomicity. + * ve_spc_cpu_wakeup_irq() - sets/clears per-CPU wake-up IRQs * * @cluster: mpidr[15:8] bitfield describing cluster affinity level * @cpu: mpidr[7:0] bitfield describing cpu affinity level * @set: if true, wake-up IRQs are set, if false they are cleared + * + * Function to set/clear per-CPU wake-up IRQs. Not protected by locking since + * it might be used in code paths where normal cacheable locks are not + * working. Locking must be provided by the caller to ensure atomicity. */ void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set) { @@ -200,14 +200,14 @@ void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr) } /** - * ve_spc_powerdown() + * ve_spc_powerdown() - enables/disables cluster powerdown + * + * @cluster: mpidr[15:8] bitfield describing cluster affinity level + * @enable: if true enables powerdown, if false disables it * * Function to enable/disable cluster powerdown. Not protected by locking * since it might be used in code paths where normal cacheable locks are not * working. Locking must be provided by the caller to ensure atomicity. - * - * @cluster: mpidr[15:8] bitfield describing cluster affinity level - * @enable: if true enables powerdown, if false disables it */ void ve_spc_powerdown(u32 cluster, bool enable) { @@ -228,7 +228,7 @@ static u32 standbywfi_cpu_mask(u32 cpu, u32 cluster) } /** - * ve_spc_cpu_in_wfi(u32 cpu, u32 cluster) + * ve_spc_cpu_in_wfi() - Checks if the specified CPU is in WFI or not * * @cpu: mpidr[7:0] bitfield describing CPU affinity level within cluster * @cluster: mpidr[15:8] bitfield describing cluster affinity level @@ -580,7 +580,7 @@ static int __init ve_spc_clk_init(void) } cluster = topology_physical_package_id(cpu_dev->id); - if (init_opp_table[cluster]) + if (cluster < 0 || init_opp_table[cluster]) continue; if (ve_init_opp_table(cpu_dev)) diff --git a/arch/arm/mach-vexpress/spc.h b/arch/arm/mach-versatile/spc.h index 288569fdfcb9..288569fdfcb9 100644 --- a/arch/arm/mach-vexpress/spc.h +++ b/arch/arm/mach-versatile/spc.h diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-versatile/tc2_pm.c index e96c42ae3602..0fe78da0c109 100644 --- a/arch/arm/mach-vexpress/tc2_pm.c +++ b/arch/arm/mach-versatile/tc2_pm.c @@ -1,7 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * arch/arm/mach-vexpress/tc2_pm.c - TC2 power management support - * * Created by: Nicolas Pitre, October 2012 * Copyright: (C) 2012-2013 Linaro Limited * diff --git a/arch/arm/mach-vexpress/v2m-mps2.c b/arch/arm/mach-versatile/v2m-mps2.c index 5b50d8e95cd7..5b50d8e95cd7 100644 --- a/arch/arm/mach-vexpress/v2m-mps2.c +++ b/arch/arm/mach-versatile/v2m-mps2.c diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-versatile/v2m.c index ffe7c7a85ae9..79afdf2a90b6 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-versatile/v2m.c @@ -3,7 +3,7 @@ #include <linux/of_address.h> #include <asm/mach/arch.h> -#include "core.h" +#include "vexpress.h" #define SYS_FLAGSSET 0x030 #define SYS_FLAGSCLR 0x034 diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile.c index 02ba68abe533..02ba68abe533 100644 --- a/arch/arm/mach-versatile/versatile_dt.c +++ b/arch/arm/mach-versatile/versatile.c diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-versatile/vexpress.h index bda78675c55d..bda78675c55d 100644 --- a/arch/arm/mach-vexpress/core.h +++ b/arch/arm/mach-versatile/vexpress.h diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig deleted file mode 100644 index 2e6aff5a0f17..000000000000 --- a/arch/arm/mach-vexpress/Kconfig +++ /dev/null @@ -1,81 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -menuconfig ARCH_VEXPRESS - bool "ARM Ltd. Versatile Express family" - depends on ARCH_MULTI_V7 - select ARCH_SUPPORTS_BIG_ENDIAN - select ARM_AMBA - select ARM_GIC - select ARM_GLOBAL_TIMER - select ARM_TIMER_SP804 - select GPIOLIB - select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if SMP - select HAVE_PATA_PLATFORM - select CLK_ICST - select NO_IOPORT_MAP - select PLAT_VERSATILE - select POWER_RESET - select POWER_RESET_VEXPRESS - select POWER_SUPPLY - select REGULATOR if MMC_ARMMMCI - select REGULATOR_FIXED_VOLTAGE if REGULATOR - select VEXPRESS_CONFIG - help - This option enables support for systems using Cortex processor based - ARM core and logic (FPGA) tiles on the Versatile Express motherboard, - for example: - - - CoreTile Express A5x2 (V2P-CA5s) - - CoreTile Express A9x4 (V2P-CA9) - - CoreTile Express A15x2 (V2P-CA15) - - LogicTile Express 13MG (V2F-2XV6) with A5, A7, A9 or A15 SMMs - (Soft Macrocell Models) - - Versatile Express RTSMs (Models) - - You must boot using a Flattened Device Tree in order to use these - platforms. The traditional (ATAGs) boot method is not usable on - these boards with this option. - -if ARCH_VEXPRESS - -config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA - bool "Enable A5 and A9 only errata work-arounds" - default y - select ARM_ERRATA_643719 if SMP - select ARM_ERRATA_720789 - select PL310_ERRATA_753970 if CACHE_L2X0 - help - Provides common dependencies for Versatile Express platforms - based on Cortex-A5 and Cortex-A9 processors. In order to - build a working kernel, you must also enable relevant core - tile support or Flattened Device Tree based support options. - -config ARCH_VEXPRESS_DCSCB - bool "Dual Cluster System Control Block (DCSCB) support" - depends on MCPM - select ARM_CCI400_PORT_CTRL - help - Support for the Dual Cluster System Configuration Block (DCSCB). - This is needed to provide CPU and cluster power management - on RTSM implementing big.LITTLE. - -config ARCH_VEXPRESS_SPC - bool "Versatile Express Serial Power Controller (SPC)" - select PM_OPP - help - The TC2 (A15x2 A7x3) versatile express core tile integrates a logic - block called Serial Power Controller (SPC) that provides the interface - between the dual cluster test-chip and the M3 microcontroller that - carries out power management. - -config ARCH_VEXPRESS_TC2_PM - bool "Versatile Express TC2 power management" - depends on MCPM - select ARM_CCI400_PORT_CTRL - select ARCH_VEXPRESS_SPC - select ARM_CPU_SUSPEND - help - Support for CPU and cluster power management on Versatile Express - with a TC2 (A15x2 A7x3) big.LITTLE core tile. - -endif diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile deleted file mode 100644 index 3651a1ed0f2b..000000000000 --- a/arch/arm/mach-vexpress/Makefile +++ /dev/null @@ -1,19 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the linux kernel. -# -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := \ - -I$(srctree)/arch/arm/plat-versatile/include - -obj-$(CONFIG_ARCH_VEXPRESS) := v2m.o -obj-$(CONFIG_ARCH_VEXPRESS_DCSCB) += dcscb.o dcscb_setup.o -CFLAGS_dcscb.o += -march=armv7-a -CFLAGS_REMOVE_dcscb.o = -pg -obj-$(CONFIG_ARCH_VEXPRESS_SPC) += spc.o -CFLAGS_REMOVE_spc.o = -pg -obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM) += tc2_pm.o -CFLAGS_tc2_pm.o += -march=armv7-a -CFLAGS_REMOVE_tc2_pm.o = -pg -obj-$(CONFIG_SMP) += platsmp.o - -obj-$(CONFIG_ARCH_MPS2) += v2m-mps2.o diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig index d01cdd9ad9c7..1aad54ea3c3d 100644 --- a/arch/arm/mach-vt8500/Kconfig +++ b/arch/arm/mach-vt8500/Kconfig @@ -10,6 +10,7 @@ config ARCH_VT8500 config ARCH_WM8505 bool "VIA/Wondermedia 85xx and WM8650" depends on ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN select ARCH_VT8500 select CPU_ARM926T diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index a56748d671c4..05be5aa9b402 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -3,7 +3,6 @@ config ARCH_ZYNQ bool "Xilinx Zynq ARM Cortex A9 Platform" depends on ARCH_MULTI_V7 select ARCH_HAS_RESET_CONTROLLER - select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_GIC select ARM_GLOBAL_TIMER diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index d30ee26ccc87..a3a4589ec73b 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -738,15 +738,29 @@ config SWP_EMULATE If unsure, say Y. +choice + prompt "CPU Endianess" + default CPU_LITTLE_ENDIAN + +config CPU_LITTLE_ENDIAN + bool "Built little-endian kernel" + help + Say Y if you plan on running a kernel in little-endian mode. + This is the default and is used in practically all modern user + space builds. + config CPU_BIG_ENDIAN bool "Build big-endian kernel" - depends on ARCH_SUPPORTS_BIG_ENDIAN depends on !LD_IS_LLD help Say Y if you plan on running a kernel in big-endian mode. - Note that your board must be properly built and your board - port must properly enable any big-endian related features - of your chipset/board/processor. + This works on many machines using ARMv6 or newer processors + but requires big-endian user space. + + The only ARMv5 platform with big-endian support is + Intel IXP4xx. + +endchoice config CPU_ENDIAN_BE8 bool @@ -1122,12 +1136,6 @@ config ARM_DMA_MEM_BUFFERABLE config ARM_HEAVY_MB bool -config ARCH_SUPPORTS_BIG_ENDIAN - bool - help - This option specifies the architecture can support big endian - operation. - config DEBUG_ALIGN_RODATA bool "Make rodata strictly non-executable" depends on STRICT_KERNEL_RWX diff --git a/arch/arm/mm/cache-b15-rac.c b/arch/arm/mm/cache-b15-rac.c index bdc07030997b..9c1172f26885 100644 --- a/arch/arm/mm/cache-b15-rac.c +++ b/arch/arm/mm/cache-b15-rac.c @@ -74,7 +74,7 @@ static inline void __b15_rac_flush(void) __raw_writel(FLUSH_RAC, b15_rac_base + rac_flush_offset); do { /* This dmb() is required to force the Bus Interface Unit - * to clean oustanding writes, and forces an idle cycle + * to clean outstanding writes, and forces an idle cycle * to be inserted. */ dmb(); diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c index 6f0909dda2f9..c86e79677ff9 100644 --- a/arch/arm/mm/copypage-xsc3.c +++ b/arch/arm/mm/copypage-xsc3.c @@ -29,6 +29,7 @@ static void xsc3_mc_copy_user_page(void *kto, const void *kfrom) int tmp; asm volatile ("\ +.arch xscale \n\ pld [%1, #0] \n\ pld [%1, #32] \n\ 1: pld [%1, #64] \n\ @@ -80,6 +81,7 @@ void xsc3_mc_clear_user_highpage(struct page *page, unsigned long vaddr) { void *ptr, *kaddr = kmap_atomic(page); asm volatile ("\ +.arch xscale \n\ mov r1, %2 \n\ mov r2, #0 \n\ mov r3, #0 \n\ diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index fe249ea91908..ce64bdb55a16 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -271,11 +271,7 @@ static void __init free_highpages(void) void __init mem_init(void) { #ifdef CONFIG_ARM_LPAE - if (swiotlb_force == SWIOTLB_FORCE || - max_pfn > arm_dma_pfn_limit) - swiotlb_init(1); - else - swiotlb_force = SWIOTLB_NO_FORCE; + swiotlb_init(max_pfn > arm_dma_pfn_limit, SWIOTLB_VERBOSE); #endif set_max_mapnr(pfn_to_page(max_pfn) - mem_map); diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index aa08bcb72db9..576c0e6c92fc 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -455,7 +455,7 @@ void iounmap(volatile void __iomem *cookie) } EXPORT_SYMBOL(iounmap); -#ifdef CONFIG_PCI +#if defined(CONFIG_PCI) || IS_ENABLED(CONFIG_PCMCIA) static int pci_ioremap_mem_type = MT_DEVICE; void pci_ioremap_set_mem_type(int mem_type) @@ -493,3 +493,11 @@ void __init early_ioremap_init(void) { early_ioremap_setup(); } + +bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size, + unsigned long flags) +{ + unsigned long pfn = PHYS_PFN(offset); + + return memblock_is_map_memory(pfn); +} diff --git a/arch/arm/mm/proc-v7-bugs.c b/arch/arm/mm/proc-v7-bugs.c index 06dbfb968182..fb9f3eb6bf48 100644 --- a/arch/arm/mm/proc-v7-bugs.c +++ b/arch/arm/mm/proc-v7-bugs.c @@ -288,6 +288,7 @@ void cpu_v7_ca15_ibe(void) { if (check_spectre_auxcr(this_cpu_ptr(&spectre_warned), BIT(0))) cpu_v7_spectre_v2_init(); + cpu_v7_spectre_bhb_init(); } void cpu_v7_bugs_init(void) diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig deleted file mode 100644 index 272670ef1e92..000000000000 --- a/arch/arm/plat-omap/Kconfig +++ /dev/null @@ -1,119 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -config ARCH_OMAP - bool - -if ARCH_OMAP - -menu "TI OMAP Common Features" - -config ARCH_OMAP_OTG - bool - -comment "OMAP Feature Selections" - -config OMAP_DEBUG_DEVICES - bool - help - For debug cards on TI reference boards. - -config OMAP_DEBUG_LEDS - def_bool y if NEW_LEDS - depends on OMAP_DEBUG_DEVICES - select LEDS_CLASS - -config POWER_AVS_OMAP - bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2" - depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM - select POWER_SUPPLY - help - Say Y to enable AVS(Adaptive Voltage Scaling) - support on OMAP containing the version 1 or - version 2 of the SmartReflex IP. - V1 is the 65nm version used in OMAP3430. - V2 is the update for the 45nm version of the IP used in OMAP3630 - and OMAP4430 - - Please note, that by default SmartReflex is only - initialized and not enabled. To enable the automatic voltage - compensation for vdd mpu and vdd core from user space, - user must write 1 to - /debug/smartreflex/sr_<X>/autocomp, - where X is mpu_iva or core for OMAP3. - Optionally autocompensation can be enabled in the kernel - by default during system init via the enable_on_init flag - which an be passed as platform data to the smartreflex driver. - -config POWER_AVS_OMAP_CLASS3 - bool "Class 3 mode of Smartreflex Implementation" - depends on POWER_AVS_OMAP && TWL4030_CORE - help - Say Y to enable Class 3 implementation of Smartreflex - - Class 3 implementation of Smartreflex employs continuous hardware - voltage calibration. - -config OMAP_RESET_CLOCKS - bool "Reset unused clocks during boot" - depends on ARCH_OMAP - help - Say Y if you want to reset unused clocks during boot. - This option saves power, but assumes all drivers are - using the clock framework. Broken drivers that do not - yet use clock framework may not work with this option. - If you are booting from another operating system, you - probably do not want this option enabled until your - device drivers work properly. - -config OMAP_MPU_TIMER - bool "Use mpu timer" - depends on ARCH_OMAP1 - help - Select this option if you want to use the OMAP mpu timer. This - timer provides more intra-tick resolution than the 32KHz timer, - but consumes more power. - -config OMAP_32K_TIMER - bool "Use 32KHz timer" - depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS - default y if (ARCH_OMAP16XX || ARCH_OMAP2PLUS) - help - Select this option if you want to enable the OMAP 32KHz timer. - This timer saves power compared to the OMAP_MPU_TIMER, and has - support for no tick during idle. The 32KHz timer provides less - intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is - currently only available for OMAP16XX, 24XX, 34XX, OMAP4/5 and DRA7XX. - - On OMAP2PLUS this value is only used for CONFIG_HZ and - CLOCK_TICK_RATE compile time calculation. - The actual timer selection is done in the board file - through the (DT_)MACHINE_START structure. - - -config OMAP3_L2_AUX_SECURE_SAVE_RESTORE - bool "OMAP3 HS/EMU save and restore for L2 AUX control register" - depends on ARCH_OMAP3 && PM - help - Without this option, L2 Auxiliary control register contents are - lost during off-mode entry on HS/EMU devices. This feature - requires support from PPA / boot-loader in HS/EMU devices, which - currently does not exist by default. - -config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID - int "Service ID for the support routine to set L2 AUX control" - depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE - default 43 - help - PPA routine service ID for setting L2 auxiliary control register. - -config OMAP_SERIAL_WAKE - bool "Enable wake-up events for serial ports" - depends on ARCH_OMAP1 && OMAP_MUX - default y - help - Select this option if you want to have your system wake up - to data on the serial RX line. This allows you to wake the - system from serial console. - -endmenu - -endif diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile deleted file mode 100644 index 371f2ed00eda..000000000000 --- a/arch/arm/plat-omap/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for the linux kernel. -# - -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-omap/include - -# Common support -obj-y := sram.o dma.o counter_32k.o - -# omap_device support (OMAP2+ only at the moment) - -obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c deleted file mode 100644 index 7a729ade2105..000000000000 --- a/arch/arm/plat-omap/counter_32k.c +++ /dev/null @@ -1,114 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * OMAP 32ksynctimer/counter_32k-related code - * - * Copyright (C) 2009 Texas Instruments - * Copyright (C) 2010 Nokia Corporation - * Tony Lindgren <tony@atomide.com> - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * NOTE: This timer is not the same timer as the old OMAP1 MPU timer. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/clocksource.h> -#include <linux/sched_clock.h> - -#include <asm/mach/time.h> - -#include <plat/counter-32k.h> - -/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ -#define OMAP2_32KSYNCNT_REV_OFF 0x0 -#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30) -#define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10 -#define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30 - -/* - * 32KHz clocksource ... always available, on pretty most chips except - * OMAP 730 and 1510. Other timers could be used as clocksources, with - * higher resolution in free-running counter modes (e.g. 12 MHz xtal), - * but systems won't necessarily want to spend resources that way. - */ -static void __iomem *sync32k_cnt_reg; - -static u64 notrace omap_32k_read_sched_clock(void) -{ - return sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0; -} - -/** - * omap_read_persistent_clock64 - Return time from a persistent clock. - * - * Reads the time from a source which isn't disabled during PM, the - * 32k sync timer. Convert the cycles elapsed since last read into - * nsecs and adds to a monotonically increasing timespec64. - */ -static struct timespec64 persistent_ts; -static cycles_t cycles; -static unsigned int persistent_mult, persistent_shift; - -static void omap_read_persistent_clock64(struct timespec64 *ts) -{ - unsigned long long nsecs; - cycles_t last_cycles; - - last_cycles = cycles; - cycles = sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0; - - nsecs = clocksource_cyc2ns(cycles - last_cycles, - persistent_mult, persistent_shift); - - timespec64_add_ns(&persistent_ts, nsecs); - - *ts = persistent_ts; -} - -/** - * omap_init_clocksource_32k - setup and register counter 32k as a - * kernel clocksource - * @pbase: base addr of counter_32k module - * @size: size of counter_32k to map - * - * Returns 0 upon success or negative error code upon failure. - * - */ -int __init omap_init_clocksource_32k(void __iomem *vbase) -{ - int ret; - - /* - * 32k sync Counter IP register offsets vary between the - * highlander version and the legacy ones. - * The 'SCHEME' bits(30-31) of the revision register is used - * to identify the version. - */ - if (readl_relaxed(vbase + OMAP2_32KSYNCNT_REV_OFF) & - OMAP2_32KSYNCNT_REV_SCHEME) - sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH; - else - sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_LOW; - - /* - * 120000 rough estimate from the calculations in - * __clocksource_update_freq_scale. - */ - clocks_calc_mult_shift(&persistent_mult, &persistent_shift, - 32768, NSEC_PER_SEC, 120000); - - ret = clocksource_mmio_init(sync32k_cnt_reg, "32k_counter", 32768, - 250, 32, clocksource_mmio_readl_up); - if (ret) { - pr_err("32k_counter: can't register clocksource\n"); - return ret; - } - - sched_clock_register(omap_32k_read_sched_clock, 32, 32768); - register_persistent_clock(omap_read_persistent_clock64); - pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n"); - - return 0; -} diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c deleted file mode 100644 index 2b698d074874..000000000000 --- a/arch/arm/plat-omap/debug-leds.c +++ /dev/null @@ -1,171 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/plat-omap/debug-leds.c - * - * Copyright 2011 by Bryan Wu <bryan.wu@canonical.com> - * Copyright 2003 by Texas Instruments Incorporated - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/leds.h> -#include <linux/io.h> -#include <linux/platform_data/gpio-omap.h> -#include <linux/slab.h> - -#include <asm/mach-types.h> - -/* Many OMAP development platforms reuse the same "debug board"; these - * platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the - * debug board (all green), accessed through FPGA registers. - */ - -/* NOTE: most boards don't have a static mapping for the FPGA ... */ -struct h2p2_dbg_fpga { - /* offset 0x00 */ - u16 smc91x[8]; - /* offset 0x10 */ - u16 fpga_rev; - u16 board_rev; - u16 gpio_outputs; - u16 leds; - /* offset 0x18 */ - u16 misc_inputs; - u16 lan_status; - u16 lan_reset; - u16 reserved0; - /* offset 0x20 */ - u16 ps2_data; - u16 ps2_ctrl; - /* plus also 4 rs232 ports ... */ -}; - -static struct h2p2_dbg_fpga __iomem *fpga; - -static u16 fpga_led_state; - -struct dbg_led { - struct led_classdev cdev; - u16 mask; -}; - -static const struct { - const char *name; - const char *trigger; -} dbg_leds[] = { - { "dbg:d4", "heartbeat", }, - { "dbg:d5", "cpu0", }, - { "dbg:d6", "default-on", }, - { "dbg:d7", }, - { "dbg:d8", }, - { "dbg:d9", }, - { "dbg:d10", }, - { "dbg:d11", }, - { "dbg:d12", }, - { "dbg:d13", }, - { "dbg:d14", }, - { "dbg:d15", }, - { "dbg:d16", }, - { "dbg:d17", }, - { "dbg:d18", }, - { "dbg:d19", }, -}; - -/* - * The triggers lines up below will only be used if the - * LED triggers are compiled in. - */ -static void dbg_led_set(struct led_classdev *cdev, - enum led_brightness b) -{ - struct dbg_led *led = container_of(cdev, struct dbg_led, cdev); - u16 reg; - - reg = readw_relaxed(&fpga->leds); - if (b != LED_OFF) - reg |= led->mask; - else - reg &= ~led->mask; - writew_relaxed(reg, &fpga->leds); -} - -static enum led_brightness dbg_led_get(struct led_classdev *cdev) -{ - struct dbg_led *led = container_of(cdev, struct dbg_led, cdev); - u16 reg; - - reg = readw_relaxed(&fpga->leds); - return (reg & led->mask) ? LED_FULL : LED_OFF; -} - -static int fpga_probe(struct platform_device *pdev) -{ - struct resource *iomem; - int i; - - iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!iomem) - return -ENODEV; - - fpga = ioremap(iomem->start, resource_size(iomem)); - writew_relaxed(0xff, &fpga->leds); - - for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) { - struct dbg_led *led; - - led = kzalloc(sizeof(*led), GFP_KERNEL); - if (!led) - break; - - led->cdev.name = dbg_leds[i].name; - led->cdev.brightness_set = dbg_led_set; - led->cdev.brightness_get = dbg_led_get; - led->cdev.default_trigger = dbg_leds[i].trigger; - led->mask = BIT(i); - - if (led_classdev_register(NULL, &led->cdev) < 0) { - kfree(led); - break; - } - } - - return 0; -} - -static int fpga_suspend_noirq(struct device *dev) -{ - fpga_led_state = readw_relaxed(&fpga->leds); - writew_relaxed(0xff, &fpga->leds); - - return 0; -} - -static int fpga_resume_noirq(struct device *dev) -{ - writew_relaxed(~fpga_led_state, &fpga->leds); - return 0; -} - -static const struct dev_pm_ops fpga_dev_pm_ops = { - .suspend_noirq = fpga_suspend_noirq, - .resume_noirq = fpga_resume_noirq, -}; - -static struct platform_driver led_driver = { - .driver.name = "omap_dbg_led", - .driver.pm = &fpga_dev_pm_ops, - .probe = fpga_probe, -}; - -static int __init fpga_init(void) -{ - if (machine_is_omap_h4() - || machine_is_omap_h3() - || machine_is_omap_h2() - || machine_is_omap_perseus2() - ) - return platform_driver_register(&led_driver); - return 0; -} -fs_initcall(fpga_init); diff --git a/arch/arm/plat-omap/include/plat/counter-32k.h b/arch/arm/plat-omap/include/plat/counter-32k.h deleted file mode 100644 index da000d482ff2..000000000000 --- a/arch/arm/plat-omap/include/plat/counter-32k.h +++ /dev/null @@ -1 +0,0 @@ -int omap_init_clocksource_32k(void __iomem *vbase); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h deleted file mode 100644 index 36f4c352cc66..000000000000 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * OMAP cpu type detection - * - * Copyright (C) 2004, 2008 Nokia Corporation - * - * Copyright (C) 2009-11 Texas Instruments. - * - * Written by Tony Lindgren <tony.lindgren@nokia.com> - * - * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> - */ - -#ifndef __ASM_ARCH_OMAP_CPU_H -#define __ASM_ARCH_OMAP_CPU_H - -#ifdef CONFIG_ARCH_OMAP1 -#include <mach/soc.h> -#endif - -#endif diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h deleted file mode 100644 index 30a07730807a..000000000000 --- a/arch/arm/plat-omap/include/plat/sram.h +++ /dev/null @@ -1,8 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -int omap_sram_init(void); - -void omap_map_sram(unsigned long start, unsigned long size, - unsigned long skip, int cached); -void omap_sram_reset(void); - -extern void *omap_sram_push(void *funcp, unsigned long size); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c deleted file mode 100644 index 0f1eacad7fe3..000000000000 --- a/arch/arm/plat-omap/sram.c +++ /dev/null @@ -1,129 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/plat-omap/sram.c - * - * OMAP SRAM detection and management - * - * Copyright (C) 2005 Nokia Corporation - * Written by Tony Lindgren <tony@atomide.com> - * - * Copyright (C) 2009-2012 Texas Instruments - * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - */ -#undef DEBUG - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> - -#include <asm/fncpy.h> -#include <asm/tlb.h> -#include <asm/cacheflush.h> -#include <asm/set_memory.h> - -#include <asm/mach/map.h> - -#include <plat/sram.h> - -#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) - -static void __iomem *omap_sram_base; -static unsigned long omap_sram_skip; -static unsigned long omap_sram_size; -static void __iomem *omap_sram_ceil; - -/* - * Memory allocator for SRAM: calculates the new ceiling address - * for pushing a function using the fncpy API. - * - * Note that fncpy requires the returned address to be aligned - * to an 8-byte boundary. - */ -static void *omap_sram_push_address(unsigned long size) -{ - unsigned long available, new_ceil = (unsigned long)omap_sram_ceil; - - available = omap_sram_ceil - (omap_sram_base + omap_sram_skip); - - if (size > available) { - pr_err("Not enough space in SRAM\n"); - return NULL; - } - - new_ceil -= size; - new_ceil = ROUND_DOWN(new_ceil, FNCPY_ALIGN); - omap_sram_ceil = IOMEM(new_ceil); - - return (void *)omap_sram_ceil; -} - -void *omap_sram_push(void *funcp, unsigned long size) -{ - void *sram; - unsigned long base; - int pages; - void *dst = NULL; - - sram = omap_sram_push_address(size); - if (!sram) - return NULL; - - base = (unsigned long)sram & PAGE_MASK; - pages = PAGE_ALIGN(size) / PAGE_SIZE; - - set_memory_rw(base, pages); - - dst = fncpy(sram, funcp, size); - - set_memory_ro(base, pages); - set_memory_x(base, pages); - - return dst; -} - -/* - * The SRAM context is lost during off-idle and stack - * needs to be reset. - */ -void omap_sram_reset(void) -{ - omap_sram_ceil = omap_sram_base + omap_sram_size; -} - -/* - * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. - */ -void __init omap_map_sram(unsigned long start, unsigned long size, - unsigned long skip, int cached) -{ - unsigned long base; - int pages; - - if (size == 0) - return; - - start = ROUND_DOWN(start, PAGE_SIZE); - omap_sram_size = size; - omap_sram_skip = skip; - omap_sram_base = __arm_ioremap_exec(start, size, cached); - if (!omap_sram_base) { - pr_err("SRAM: Could not map\n"); - return; - } - - omap_sram_reset(); - - /* - * Looks like we need to preserve some bootloader code at the - * beginning of SRAM for jumping to flash for reboot to work... - */ - memset_io(omap_sram_base + omap_sram_skip, 0, - omap_sram_size - omap_sram_skip); - - base = (unsigned long)omap_sram_base; - pages = PAGE_ALIGN(omap_sram_size) / PAGE_SIZE; - - set_memory_ro(base, pages); - set_memory_x(base, pages); -} diff --git a/arch/arm/plat-pxa/Kconfig b/arch/arm/plat-pxa/Kconfig deleted file mode 100644 index 6f7a0a39c2b9..000000000000 --- a/arch/arm/plat-pxa/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -if PLAT_PXA - -config PXA_SSP - tristate - help - Enable support for PXA2xx SSP ports - -endif diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile deleted file mode 100644 index 349ea0af8450..000000000000 --- a/arch/arm/plat-pxa/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for code common across different PXA processor families -# -ccflags-$(CONFIG_ARCH_MMP) := -I$(srctree)/$(src)/include - -obj-$(CONFIG_PXA3xx) += mfp.o -obj-$(CONFIG_ARCH_MMP) += mfp.o - -obj-$(CONFIG_PXA_SSP) += ssp.o diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h deleted file mode 100644 index 3accaa9ee781..000000000000 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ /dev/null @@ -1,472 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/plat-pxa/include/plat/mfp.h - * - * Common Multi-Function Pin Definitions - * - * Copyright (C) 2007 Marvell International Ltd. - * - * 2007-8-21: eric miao <eric.miao@marvell.com> - * initial version - */ - -#ifndef __ASM_PLAT_MFP_H -#define __ASM_PLAT_MFP_H - -#define mfp_to_gpio(m) ((m) % 256) - -/* list of all the configurable MFP pins */ -enum { - MFP_PIN_INVALID = -1, - - MFP_PIN_GPIO0 = 0, - MFP_PIN_GPIO1, - MFP_PIN_GPIO2, - MFP_PIN_GPIO3, - MFP_PIN_GPIO4, - MFP_PIN_GPIO5, - MFP_PIN_GPIO6, - MFP_PIN_GPIO7, - MFP_PIN_GPIO8, - MFP_PIN_GPIO9, - MFP_PIN_GPIO10, - MFP_PIN_GPIO11, - MFP_PIN_GPIO12, - MFP_PIN_GPIO13, - MFP_PIN_GPIO14, - MFP_PIN_GPIO15, - MFP_PIN_GPIO16, - MFP_PIN_GPIO17, - MFP_PIN_GPIO18, - MFP_PIN_GPIO19, - MFP_PIN_GPIO20, - MFP_PIN_GPIO21, - MFP_PIN_GPIO22, - MFP_PIN_GPIO23, - MFP_PIN_GPIO24, - MFP_PIN_GPIO25, - MFP_PIN_GPIO26, - MFP_PIN_GPIO27, - MFP_PIN_GPIO28, - MFP_PIN_GPIO29, - MFP_PIN_GPIO30, - MFP_PIN_GPIO31, - MFP_PIN_GPIO32, - MFP_PIN_GPIO33, - MFP_PIN_GPIO34, - MFP_PIN_GPIO35, - MFP_PIN_GPIO36, - MFP_PIN_GPIO37, - MFP_PIN_GPIO38, - MFP_PIN_GPIO39, - MFP_PIN_GPIO40, - MFP_PIN_GPIO41, - MFP_PIN_GPIO42, - MFP_PIN_GPIO43, - MFP_PIN_GPIO44, - MFP_PIN_GPIO45, - MFP_PIN_GPIO46, - MFP_PIN_GPIO47, - MFP_PIN_GPIO48, - MFP_PIN_GPIO49, - MFP_PIN_GPIO50, - MFP_PIN_GPIO51, - MFP_PIN_GPIO52, - MFP_PIN_GPIO53, - MFP_PIN_GPIO54, - MFP_PIN_GPIO55, - MFP_PIN_GPIO56, - MFP_PIN_GPIO57, - MFP_PIN_GPIO58, - MFP_PIN_GPIO59, - MFP_PIN_GPIO60, - MFP_PIN_GPIO61, - MFP_PIN_GPIO62, - MFP_PIN_GPIO63, - MFP_PIN_GPIO64, - MFP_PIN_GPIO65, - MFP_PIN_GPIO66, - MFP_PIN_GPIO67, - MFP_PIN_GPIO68, - MFP_PIN_GPIO69, - MFP_PIN_GPIO70, - MFP_PIN_GPIO71, - MFP_PIN_GPIO72, - MFP_PIN_GPIO73, - MFP_PIN_GPIO74, - MFP_PIN_GPIO75, - MFP_PIN_GPIO76, - MFP_PIN_GPIO77, - MFP_PIN_GPIO78, - MFP_PIN_GPIO79, - MFP_PIN_GPIO80, - MFP_PIN_GPIO81, - MFP_PIN_GPIO82, - MFP_PIN_GPIO83, - MFP_PIN_GPIO84, - MFP_PIN_GPIO85, - MFP_PIN_GPIO86, - MFP_PIN_GPIO87, - MFP_PIN_GPIO88, - MFP_PIN_GPIO89, - MFP_PIN_GPIO90, - MFP_PIN_GPIO91, - MFP_PIN_GPIO92, - MFP_PIN_GPIO93, - MFP_PIN_GPIO94, - MFP_PIN_GPIO95, - MFP_PIN_GPIO96, - MFP_PIN_GPIO97, - MFP_PIN_GPIO98, - MFP_PIN_GPIO99, - MFP_PIN_GPIO100, - MFP_PIN_GPIO101, - MFP_PIN_GPIO102, - MFP_PIN_GPIO103, - MFP_PIN_GPIO104, - MFP_PIN_GPIO105, - MFP_PIN_GPIO106, - MFP_PIN_GPIO107, - MFP_PIN_GPIO108, - MFP_PIN_GPIO109, - MFP_PIN_GPIO110, - MFP_PIN_GPIO111, - MFP_PIN_GPIO112, - MFP_PIN_GPIO113, - MFP_PIN_GPIO114, - MFP_PIN_GPIO115, - MFP_PIN_GPIO116, - MFP_PIN_GPIO117, - MFP_PIN_GPIO118, - MFP_PIN_GPIO119, - MFP_PIN_GPIO120, - MFP_PIN_GPIO121, - MFP_PIN_GPIO122, - MFP_PIN_GPIO123, - MFP_PIN_GPIO124, - MFP_PIN_GPIO125, - MFP_PIN_GPIO126, - MFP_PIN_GPIO127, - - MFP_PIN_GPIO128, - MFP_PIN_GPIO129, - MFP_PIN_GPIO130, - MFP_PIN_GPIO131, - MFP_PIN_GPIO132, - MFP_PIN_GPIO133, - MFP_PIN_GPIO134, - MFP_PIN_GPIO135, - MFP_PIN_GPIO136, - MFP_PIN_GPIO137, - MFP_PIN_GPIO138, - MFP_PIN_GPIO139, - MFP_PIN_GPIO140, - MFP_PIN_GPIO141, - MFP_PIN_GPIO142, - MFP_PIN_GPIO143, - MFP_PIN_GPIO144, - MFP_PIN_GPIO145, - MFP_PIN_GPIO146, - MFP_PIN_GPIO147, - MFP_PIN_GPIO148, - MFP_PIN_GPIO149, - MFP_PIN_GPIO150, - MFP_PIN_GPIO151, - MFP_PIN_GPIO152, - MFP_PIN_GPIO153, - MFP_PIN_GPIO154, - MFP_PIN_GPIO155, - MFP_PIN_GPIO156, - MFP_PIN_GPIO157, - MFP_PIN_GPIO158, - MFP_PIN_GPIO159, - MFP_PIN_GPIO160, - MFP_PIN_GPIO161, - MFP_PIN_GPIO162, - MFP_PIN_GPIO163, - MFP_PIN_GPIO164, - MFP_PIN_GPIO165, - MFP_PIN_GPIO166, - MFP_PIN_GPIO167, - MFP_PIN_GPIO168, - MFP_PIN_GPIO169, - MFP_PIN_GPIO170, - MFP_PIN_GPIO171, - MFP_PIN_GPIO172, - MFP_PIN_GPIO173, - MFP_PIN_GPIO174, - MFP_PIN_GPIO175, - MFP_PIN_GPIO176, - MFP_PIN_GPIO177, - MFP_PIN_GPIO178, - MFP_PIN_GPIO179, - MFP_PIN_GPIO180, - MFP_PIN_GPIO181, - MFP_PIN_GPIO182, - MFP_PIN_GPIO183, - MFP_PIN_GPIO184, - MFP_PIN_GPIO185, - MFP_PIN_GPIO186, - MFP_PIN_GPIO187, - MFP_PIN_GPIO188, - MFP_PIN_GPIO189, - MFP_PIN_GPIO190, - MFP_PIN_GPIO191, - - MFP_PIN_GPIO255 = 255, - - MFP_PIN_GPIO0_2, - MFP_PIN_GPIO1_2, - MFP_PIN_GPIO2_2, - MFP_PIN_GPIO3_2, - MFP_PIN_GPIO4_2, - MFP_PIN_GPIO5_2, - MFP_PIN_GPIO6_2, - MFP_PIN_GPIO7_2, - MFP_PIN_GPIO8_2, - MFP_PIN_GPIO9_2, - MFP_PIN_GPIO10_2, - MFP_PIN_GPIO11_2, - MFP_PIN_GPIO12_2, - MFP_PIN_GPIO13_2, - MFP_PIN_GPIO14_2, - MFP_PIN_GPIO15_2, - MFP_PIN_GPIO16_2, - MFP_PIN_GPIO17_2, - - MFP_PIN_ULPI_STP, - MFP_PIN_ULPI_NXT, - MFP_PIN_ULPI_DIR, - - MFP_PIN_nXCVREN, - MFP_PIN_DF_CLE_nOE, - MFP_PIN_DF_nADV1_ALE, - MFP_PIN_DF_SCLK_E, - MFP_PIN_DF_SCLK_S, - MFP_PIN_nBE0, - MFP_PIN_nBE1, - MFP_PIN_DF_nADV2_ALE, - MFP_PIN_DF_INT_RnB, - MFP_PIN_DF_nCS0, - MFP_PIN_DF_nCS1, - MFP_PIN_nLUA, - MFP_PIN_nLLA, - MFP_PIN_DF_nWE, - MFP_PIN_DF_ALE_nWE, - MFP_PIN_DF_nRE_nOE, - MFP_PIN_DF_ADDR0, - MFP_PIN_DF_ADDR1, - MFP_PIN_DF_ADDR2, - MFP_PIN_DF_ADDR3, - MFP_PIN_DF_IO0, - MFP_PIN_DF_IO1, - MFP_PIN_DF_IO2, - MFP_PIN_DF_IO3, - MFP_PIN_DF_IO4, - MFP_PIN_DF_IO5, - MFP_PIN_DF_IO6, - MFP_PIN_DF_IO7, - MFP_PIN_DF_IO8, - MFP_PIN_DF_IO9, - MFP_PIN_DF_IO10, - MFP_PIN_DF_IO11, - MFP_PIN_DF_IO12, - MFP_PIN_DF_IO13, - MFP_PIN_DF_IO14, - MFP_PIN_DF_IO15, - MFP_PIN_DF_nCS0_SM_nCS2, - MFP_PIN_DF_nCS1_SM_nCS3, - MFP_PIN_SM_nCS0, - MFP_PIN_SM_nCS1, - MFP_PIN_DF_WEn, - MFP_PIN_DF_REn, - MFP_PIN_DF_CLE_SM_OEn, - MFP_PIN_DF_ALE_SM_WEn, - MFP_PIN_DF_RDY0, - MFP_PIN_DF_RDY1, - - MFP_PIN_SM_SCLK, - MFP_PIN_SM_BE0, - MFP_PIN_SM_BE1, - MFP_PIN_SM_ADV, - MFP_PIN_SM_ADVMUX, - MFP_PIN_SM_RDY, - - MFP_PIN_MMC1_DAT7, - MFP_PIN_MMC1_DAT6, - MFP_PIN_MMC1_DAT5, - MFP_PIN_MMC1_DAT4, - MFP_PIN_MMC1_DAT3, - MFP_PIN_MMC1_DAT2, - MFP_PIN_MMC1_DAT1, - MFP_PIN_MMC1_DAT0, - MFP_PIN_MMC1_CMD, - MFP_PIN_MMC1_CLK, - MFP_PIN_MMC1_CD, - MFP_PIN_MMC1_WP, - - /* additional pins on PXA930 */ - MFP_PIN_GSIM_UIO, - MFP_PIN_GSIM_UCLK, - MFP_PIN_GSIM_UDET, - MFP_PIN_GSIM_nURST, - MFP_PIN_PMIC_INT, - MFP_PIN_RDY, - - /* additional pins on MMP2 */ - MFP_PIN_TWSI1_SCL, - MFP_PIN_TWSI1_SDA, - MFP_PIN_TWSI4_SCL, - MFP_PIN_TWSI4_SDA, - MFP_PIN_CLK_REQ, - - MFP_PIN_MAX, -}; - -/* - * a possible MFP configuration is represented by a 32-bit integer - * - * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum) - * bit 10..12 - Alternate Function Selection - * bit 13..15 - Drive Strength - * bit 16..18 - Low Power Mode State - * bit 19..20 - Low Power Mode Edge Detection - * bit 21..22 - Run Mode Pull State - * - * to facilitate the definition, the following macros are provided - * - * MFP_CFG_DEFAULT - default MFP configuration value, with - * alternate function = 0, - * drive strength = fast 3mA (MFP_DS03X) - * low power mode = default - * edge detection = none - * - * MFP_CFG - default MFPR value with alternate function - * MFP_CFG_DRV - default MFPR value with alternate function and - * pin drive strength - * MFP_CFG_LPM - default MFPR value with alternate function and - * low power mode - * MFP_CFG_X - default MFPR value with alternate function, - * pin drive strength and low power mode - */ - -typedef unsigned long mfp_cfg_t; - -#define MFP_PIN(x) ((x) & 0x3ff) - -#define MFP_AF0 (0x0 << 10) -#define MFP_AF1 (0x1 << 10) -#define MFP_AF2 (0x2 << 10) -#define MFP_AF3 (0x3 << 10) -#define MFP_AF4 (0x4 << 10) -#define MFP_AF5 (0x5 << 10) -#define MFP_AF6 (0x6 << 10) -#define MFP_AF7 (0x7 << 10) -#define MFP_AF_MASK (0x7 << 10) -#define MFP_AF(x) (((x) >> 10) & 0x7) - -#define MFP_DS01X (0x0 << 13) -#define MFP_DS02X (0x1 << 13) -#define MFP_DS03X (0x2 << 13) -#define MFP_DS04X (0x3 << 13) -#define MFP_DS06X (0x4 << 13) -#define MFP_DS08X (0x5 << 13) -#define MFP_DS10X (0x6 << 13) -#define MFP_DS13X (0x7 << 13) -#define MFP_DS_MASK (0x7 << 13) -#define MFP_DS(x) (((x) >> 13) & 0x7) - -#define MFP_LPM_DEFAULT (0x0 << 16) -#define MFP_LPM_DRIVE_LOW (0x1 << 16) -#define MFP_LPM_DRIVE_HIGH (0x2 << 16) -#define MFP_LPM_PULL_LOW (0x3 << 16) -#define MFP_LPM_PULL_HIGH (0x4 << 16) -#define MFP_LPM_FLOAT (0x5 << 16) -#define MFP_LPM_INPUT (0x6 << 16) -#define MFP_LPM_STATE_MASK (0x7 << 16) -#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7) - -#define MFP_LPM_EDGE_NONE (0x0 << 19) -#define MFP_LPM_EDGE_RISE (0x1 << 19) -#define MFP_LPM_EDGE_FALL (0x2 << 19) -#define MFP_LPM_EDGE_BOTH (0x3 << 19) -#define MFP_LPM_EDGE_MASK (0x3 << 19) -#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3) - -#define MFP_PULL_NONE (0x0 << 21) -#define MFP_PULL_LOW (0x1 << 21) -#define MFP_PULL_HIGH (0x2 << 21) -#define MFP_PULL_BOTH (0x3 << 21) -#define MFP_PULL_FLOAT (0x4 << 21) -#define MFP_PULL_MASK (0x7 << 21) -#define MFP_PULL(x) (((x) >> 21) & 0x7) - -#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\ - MFP_LPM_EDGE_NONE | MFP_PULL_NONE) - -#define MFP_CFG(pin, af) \ - ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\ - (MFP_PIN(MFP_PIN_##pin) | MFP_##af)) - -#define MFP_CFG_DRV(pin, af, drv) \ - ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\ - (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv)) - -#define MFP_CFG_LPM(pin, af, lpm) \ - ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\ - (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm)) - -#define MFP_CFG_X(pin, af, drv, lpm) \ - ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\ - (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm)) - -#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP) -/* - * each MFP pin will have a MFPR register, since the offset of the - * register varies between processors, the processor specific code - * should initialize the pin offsets by mfp_init() - * - * mfp_init_base() - accepts a virtual base for all MFPR registers and - * initialize the MFP table to a default state - * - * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which - * represents a range of MFP pins from "start" to "end", with the offset - * beginning at "offset", to define a single pin, let "end" = -1. - * - * use - * - * MFP_ADDR_X() to define a range of pins - * MFP_ADDR() to define a single pin - * MFP_ADDR_END to signal the end of pin offset definitions - */ -struct mfp_addr_map { - unsigned int start; - unsigned int end; - unsigned long offset; -}; - -#define MFP_ADDR_X(start, end, offset) \ - { MFP_PIN_##start, MFP_PIN_##end, offset } - -#define MFP_ADDR(pin, offset) \ - { MFP_PIN_##pin, -1, offset } - -#define MFP_ADDR_END { MFP_PIN_INVALID, 0 } - -void __init mfp_init_base(void __iomem *mfpr_base); -void __init mfp_init_addr(struct mfp_addr_map *map); - -/* - * mfp_{read, write}() - for direct read/write access to the MFPR register - * mfp_config() - for configuring a group of MFPR registers - * mfp_config_lpm() - configuring all low power MFPR registers for suspend - * mfp_config_run() - configuring all run time MFPR registers after resume - */ -unsigned long mfp_read(int mfp); -void mfp_write(int mfp, unsigned long mfpr_val); -void mfp_config(unsigned long *mfp_cfgs, int num); -void mfp_config_run(void); -void mfp_config_lpm(void); -#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */ - -#endif /* __ASM_PLAT_MFP_H */ diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c deleted file mode 100644 index 17fc4f33f35b..000000000000 --- a/arch/arm/plat-pxa/mfp.c +++ /dev/null @@ -1,282 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/plat-pxa/mfp.c - * - * Multi-Function Pin Support - * - * Copyright (C) 2007 Marvell Internation Ltd. - * - * 2007-08-21: eric miao <eric.miao@marvell.com> - * initial version - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> - -#include <plat/mfp.h> - -#define MFPR_SIZE (PAGE_SIZE) - -/* MFPR register bit definitions */ -#define MFPR_PULL_SEL (0x1 << 15) -#define MFPR_PULLUP_EN (0x1 << 14) -#define MFPR_PULLDOWN_EN (0x1 << 13) -#define MFPR_SLEEP_SEL (0x1 << 9) -#define MFPR_SLEEP_OE_N (0x1 << 7) -#define MFPR_EDGE_CLEAR (0x1 << 6) -#define MFPR_EDGE_FALL_EN (0x1 << 5) -#define MFPR_EDGE_RISE_EN (0x1 << 4) - -#define MFPR_SLEEP_DATA(x) ((x) << 8) -#define MFPR_DRIVE(x) (((x) & 0x7) << 10) -#define MFPR_AF_SEL(x) (((x) & 0x7) << 0) - -#define MFPR_EDGE_NONE (0) -#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN) -#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN) -#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL) - -/* - * Table that determines the low power modes outputs, with actual settings - * used in parentheses for don't-care values. Except for the float output, - * the configured driven and pulled levels match, so if there is a need for - * non-LPM pulled output, the same configuration could probably be used. - * - * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel - * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15) - * - * Input 0 X(0) X(0) X(0) 0 - * Drive 0 0 0 0 X(1) 0 - * Drive 1 0 1 X(1) 0 0 - * Pull hi (1) 1 X(1) 1 0 0 - * Pull lo (0) 1 X(0) 0 1 0 - * Z (float) 1 X(0) 0 0 0 - */ -#define MFPR_LPM_INPUT (0) -#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN) -#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN) -#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N) -#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N) -#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N) -#define MFPR_LPM_MASK (0xe080) - -/* - * The pullup and pulldown state of the MFP pin at run mode is by default - * determined by the selected alternate function. In case that some buggy - * devices need to override this default behavior, the definitions below - * indicates the setting of corresponding MFPR bits - * - * Definition pull_sel pullup_en pulldown_en - * MFPR_PULL_NONE 0 0 0 - * MFPR_PULL_LOW 1 0 1 - * MFPR_PULL_HIGH 1 1 0 - * MFPR_PULL_BOTH 1 1 1 - * MFPR_PULL_FLOAT 1 0 0 - */ -#define MFPR_PULL_NONE (0) -#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN) -#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN) -#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN) -#define MFPR_PULL_FLOAT (MFPR_PULL_SEL) - -/* mfp_spin_lock is used to ensure that MFP register configuration - * (most likely a read-modify-write operation) is atomic, and that - * mfp_table[] is consistent - */ -static DEFINE_SPINLOCK(mfp_spin_lock); - -static void __iomem *mfpr_mmio_base; - -struct mfp_pin { - unsigned long config; /* -1 for not configured */ - unsigned long mfpr_off; /* MFPRxx Register offset */ - unsigned long mfpr_run; /* Run-Mode Register Value */ - unsigned long mfpr_lpm; /* Low Power Mode Register Value */ -}; - -static struct mfp_pin mfp_table[MFP_PIN_MAX]; - -/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */ -static const unsigned long mfpr_lpm[] = { - MFPR_LPM_INPUT, - MFPR_LPM_DRIVE_LOW, - MFPR_LPM_DRIVE_HIGH, - MFPR_LPM_PULL_LOW, - MFPR_LPM_PULL_HIGH, - MFPR_LPM_FLOAT, - MFPR_LPM_INPUT, -}; - -/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */ -static const unsigned long mfpr_pull[] = { - MFPR_PULL_NONE, - MFPR_PULL_LOW, - MFPR_PULL_HIGH, - MFPR_PULL_BOTH, - MFPR_PULL_FLOAT, -}; - -/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */ -static const unsigned long mfpr_edge[] = { - MFPR_EDGE_NONE, - MFPR_EDGE_RISE, - MFPR_EDGE_FALL, - MFPR_EDGE_BOTH, -}; - -#define mfpr_readl(off) \ - __raw_readl(mfpr_mmio_base + (off)) - -#define mfpr_writel(off, val) \ - __raw_writel(val, mfpr_mmio_base + (off)) - -#define mfp_configured(p) ((p)->config != -1) - -/* - * perform a read-back of any valid MFPR register to make sure the - * previous writings are finished - */ -static unsigned long mfpr_off_readback; -#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + mfpr_off_readback) - -static inline void __mfp_config_run(struct mfp_pin *p) -{ - if (mfp_configured(p)) - mfpr_writel(p->mfpr_off, p->mfpr_run); -} - -static inline void __mfp_config_lpm(struct mfp_pin *p) -{ - if (mfp_configured(p)) { - unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR; - if (mfpr_clr != p->mfpr_run) - mfpr_writel(p->mfpr_off, mfpr_clr); - if (p->mfpr_lpm != mfpr_clr) - mfpr_writel(p->mfpr_off, p->mfpr_lpm); - } -} - -void mfp_config(unsigned long *mfp_cfgs, int num) -{ - unsigned long flags; - int i; - - spin_lock_irqsave(&mfp_spin_lock, flags); - - for (i = 0; i < num; i++, mfp_cfgs++) { - unsigned long tmp, c = *mfp_cfgs; - struct mfp_pin *p; - int pin, af, drv, lpm, edge, pull; - - pin = MFP_PIN(c); - BUG_ON(pin >= MFP_PIN_MAX); - p = &mfp_table[pin]; - - af = MFP_AF(c); - drv = MFP_DS(c); - lpm = MFP_LPM_STATE(c); - edge = MFP_LPM_EDGE(c); - pull = MFP_PULL(c); - - /* run-mode pull settings will conflict with MFPR bits of - * low power mode state, calculate mfpr_run and mfpr_lpm - * individually if pull != MFP_PULL_NONE - */ - tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv); - - if (likely(pull == MFP_PULL_NONE)) { - p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge]; - p->mfpr_lpm = p->mfpr_run; - } else { - p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge]; - p->mfpr_run = tmp | mfpr_pull[pull]; - } - - p->config = c; __mfp_config_run(p); - } - - mfpr_sync(); - spin_unlock_irqrestore(&mfp_spin_lock, flags); -} - -unsigned long mfp_read(int mfp) -{ - unsigned long val, flags; - - BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX); - - spin_lock_irqsave(&mfp_spin_lock, flags); - val = mfpr_readl(mfp_table[mfp].mfpr_off); - spin_unlock_irqrestore(&mfp_spin_lock, flags); - - return val; -} - -void mfp_write(int mfp, unsigned long val) -{ - unsigned long flags; - - BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX); - - spin_lock_irqsave(&mfp_spin_lock, flags); - mfpr_writel(mfp_table[mfp].mfpr_off, val); - mfpr_sync(); - spin_unlock_irqrestore(&mfp_spin_lock, flags); -} - -void __init mfp_init_base(void __iomem *mfpr_base) -{ - int i; - - /* initialize the table with default - unconfigured */ - for (i = 0; i < ARRAY_SIZE(mfp_table); i++) - mfp_table[i].config = -1; - - mfpr_mmio_base = mfpr_base; -} - -void __init mfp_init_addr(struct mfp_addr_map *map) -{ - struct mfp_addr_map *p; - unsigned long offset, flags; - int i; - - spin_lock_irqsave(&mfp_spin_lock, flags); - - /* mfp offset for readback */ - mfpr_off_readback = map[0].offset; - - for (p = map; p->start != MFP_PIN_INVALID; p++) { - offset = p->offset; - i = p->start; - - do { - mfp_table[i].mfpr_off = offset; - mfp_table[i].mfpr_run = 0; - mfp_table[i].mfpr_lpm = 0; - offset += 4; i++; - } while ((i <= p->end) && (p->end != -1)); - } - - spin_unlock_irqrestore(&mfp_spin_lock, flags); -} - -void mfp_config_lpm(void) -{ - struct mfp_pin *p = &mfp_table[0]; - int pin; - - for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++) - __mfp_config_lpm(p); -} - -void mfp_config_run(void) -{ - struct mfp_pin *p = &mfp_table[0]; - int pin; - - for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++) - __mfp_config_run(p); -} diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c deleted file mode 100644 index 563440315acd..000000000000 --- a/arch/arm/plat-pxa/ssp.c +++ /dev/null @@ -1,231 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-pxa/ssp.c - * - * based on linux/arch/arm/mach-sa1100/ssp.c by Russell King - * - * Copyright (C) 2003 Russell King. - * Copyright (C) 2003 Wolfson Microelectronics PLC - * - * PXA2xx SSP driver. This provides the generic core for simple - * IO-based SSP applications and allows easy port setup for DMA access. - * - * Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com> - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/mutex.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/spi/pxa2xx_spi.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_device.h> - -#include <asm/irq.h> - -static DEFINE_MUTEX(ssp_lock); -static LIST_HEAD(ssp_list); - -struct ssp_device *pxa_ssp_request(int port, const char *label) -{ - struct ssp_device *ssp = NULL; - - mutex_lock(&ssp_lock); - - list_for_each_entry(ssp, &ssp_list, node) { - if (ssp->port_id == port && ssp->use_count == 0) { - ssp->use_count++; - ssp->label = label; - break; - } - } - - mutex_unlock(&ssp_lock); - - if (&ssp->node == &ssp_list) - return NULL; - - return ssp; -} -EXPORT_SYMBOL(pxa_ssp_request); - -struct ssp_device *pxa_ssp_request_of(const struct device_node *of_node, - const char *label) -{ - struct ssp_device *ssp = NULL; - - mutex_lock(&ssp_lock); - - list_for_each_entry(ssp, &ssp_list, node) { - if (ssp->of_node == of_node && ssp->use_count == 0) { - ssp->use_count++; - ssp->label = label; - break; - } - } - - mutex_unlock(&ssp_lock); - - if (&ssp->node == &ssp_list) - return NULL; - - return ssp; -} -EXPORT_SYMBOL(pxa_ssp_request_of); - -void pxa_ssp_free(struct ssp_device *ssp) -{ - mutex_lock(&ssp_lock); - if (ssp->use_count) { - ssp->use_count--; - ssp->label = NULL; - } else - dev_err(ssp->dev, "device already free\n"); - mutex_unlock(&ssp_lock); -} -EXPORT_SYMBOL(pxa_ssp_free); - -#ifdef CONFIG_OF -static const struct of_device_id pxa_ssp_of_ids[] = { - { .compatible = "mrvl,pxa25x-ssp", .data = (void *) PXA25x_SSP }, - { .compatible = "mvrl,pxa25x-nssp", .data = (void *) PXA25x_NSSP }, - { .compatible = "mrvl,pxa27x-ssp", .data = (void *) PXA27x_SSP }, - { .compatible = "mrvl,pxa3xx-ssp", .data = (void *) PXA3xx_SSP }, - { .compatible = "mvrl,pxa168-ssp", .data = (void *) PXA168_SSP }, - { .compatible = "mrvl,pxa910-ssp", .data = (void *) PXA910_SSP }, - { .compatible = "mrvl,ce4100-ssp", .data = (void *) CE4100_SSP }, - { }, -}; -MODULE_DEVICE_TABLE(of, pxa_ssp_of_ids); -#endif - -static int pxa_ssp_probe(struct platform_device *pdev) -{ - struct resource *res; - struct ssp_device *ssp; - struct device *dev = &pdev->dev; - - ssp = devm_kzalloc(dev, sizeof(struct ssp_device), GFP_KERNEL); - if (ssp == NULL) - return -ENOMEM; - - ssp->dev = dev; - - ssp->clk = devm_clk_get(dev, NULL); - if (IS_ERR(ssp->clk)) - return PTR_ERR(ssp->clk); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(dev, "no memory resource defined\n"); - return -ENODEV; - } - - res = devm_request_mem_region(dev, res->start, resource_size(res), - pdev->name); - if (res == NULL) { - dev_err(dev, "failed to request memory resource\n"); - return -EBUSY; - } - - ssp->phys_base = res->start; - - ssp->mmio_base = devm_ioremap(dev, res->start, resource_size(res)); - if (ssp->mmio_base == NULL) { - dev_err(dev, "failed to ioremap() registers\n"); - return -ENODEV; - } - - ssp->irq = platform_get_irq(pdev, 0); - if (ssp->irq < 0) { - dev_err(dev, "no IRQ resource defined\n"); - return -ENODEV; - } - - if (dev->of_node) { - const struct of_device_id *id = - of_match_device(of_match_ptr(pxa_ssp_of_ids), dev); - ssp->type = (int) id->data; - } else { - const struct platform_device_id *id = - platform_get_device_id(pdev); - ssp->type = (int) id->driver_data; - - /* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id - * starts from 0, do a translation here - */ - ssp->port_id = pdev->id + 1; - } - - ssp->use_count = 0; - ssp->of_node = dev->of_node; - - mutex_lock(&ssp_lock); - list_add(&ssp->node, &ssp_list); - mutex_unlock(&ssp_lock); - - platform_set_drvdata(pdev, ssp); - - return 0; -} - -static int pxa_ssp_remove(struct platform_device *pdev) -{ - struct ssp_device *ssp; - - ssp = platform_get_drvdata(pdev); - if (ssp == NULL) - return -ENODEV; - - mutex_lock(&ssp_lock); - list_del(&ssp->node); - mutex_unlock(&ssp_lock); - - return 0; -} - -static const struct platform_device_id ssp_id_table[] = { - { "pxa25x-ssp", PXA25x_SSP }, - { "pxa25x-nssp", PXA25x_NSSP }, - { "pxa27x-ssp", PXA27x_SSP }, - { "pxa3xx-ssp", PXA3xx_SSP }, - { "pxa168-ssp", PXA168_SSP }, - { "pxa910-ssp", PXA910_SSP }, - { }, -}; - -static struct platform_driver pxa_ssp_driver = { - .probe = pxa_ssp_probe, - .remove = pxa_ssp_remove, - .driver = { - .name = "pxa2xx-ssp", - .of_match_table = of_match_ptr(pxa_ssp_of_ids), - }, - .id_table = ssp_id_table, -}; - -static int __init pxa_ssp_init(void) -{ - return platform_driver_register(&pxa_ssp_driver); -} - -static void __exit pxa_ssp_exit(void) -{ - platform_driver_unregister(&pxa_ssp_driver); -} - -arch_initcall(pxa_ssp_init); -module_exit(pxa_ssp_exit); - -MODULE_DESCRIPTION("PXA SSP driver"); -MODULE_AUTHOR("Liam Girdwood"); -MODULE_LICENSE("GPL"); diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile deleted file mode 100644 index 5de44a57c4de..000000000000 --- a/arch/arm/plat-versatile/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include - -obj-$(CONFIG_SMP) += headsmp.o platsmp.o -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile index ec52b776f926..8ca1c9f262a2 100644 --- a/arch/arm/vdso/Makefile +++ b/arch/arm/vdso/Makefile @@ -28,7 +28,7 @@ CPPFLAGS_vdso.lds += -P -C -U$(ARCH) CFLAGS_REMOVE_vdso.o = -pg # Force -O2 to avoid libgcc dependencies -CFLAGS_REMOVE_vgettimeofday.o = -pg -Os $(GCC_PLUGINS_CFLAGS) +CFLAGS_REMOVE_vgettimeofday.o = -pg -Os $(RANDSTRUCT_CFLAGS) $(GCC_PLUGINS_CFLAGS) ifeq ($(c-gettimeofday-y),) CFLAGS_vgettimeofday.o = -O2 else diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index ec5b082f3de6..07eb69f9e7df 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -337,12 +337,15 @@ int __init arch_xen_unpopulated_init(struct resource **res) if (!nr_reg) { pr_err("No extended regions are found\n"); + of_node_put(np); return -EINVAL; } regs = kcalloc(nr_reg, sizeof(*regs), GFP_KERNEL); - if (!regs) + if (!regs) { + of_node_put(np); return -ENOMEM; + } /* * Create resource from extended regions provided by the hypervisor to be @@ -403,8 +406,8 @@ int __init arch_xen_unpopulated_init(struct resource **res) *res = &xen_resource; err: + of_node_put(np); kfree(regs); - return rc; } #endif @@ -424,8 +427,10 @@ static void __init xen_dt_guest_init(void) if (of_address_to_resource(xen_node, GRANT_TABLE_INDEX, &res)) { pr_err("Xen grant table region is not found\n"); + of_node_put(xen_node); return; } + of_node_put(xen_node); xen_grant_frames = res.start; } diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index a7e54a087b80..3d826c0b5fee 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -23,22 +23,20 @@ #include <asm/xen/hypercall.h> #include <asm/xen/interface.h> -unsigned long xen_get_swiotlb_free_pages(unsigned int order) +static gfp_t xen_swiotlb_gfp(void) { phys_addr_t base; - gfp_t flags = __GFP_NOWARN|__GFP_KSWAPD_RECLAIM; u64 i; for_each_mem_range(i, &base, NULL) { if (base < (phys_addr_t)0xffffffff) { if (IS_ENABLED(CONFIG_ZONE_DMA32)) - flags |= __GFP_DMA32; - else - flags |= __GFP_DMA; - break; + return __GFP_DMA32; + return __GFP_DMA; } } - return __get_free_pages(flags, order); + + return GFP_KERNEL; } static bool hypercall_cflush = false; @@ -118,23 +116,6 @@ bool xen_arch_need_swiotlb(struct device *dev, !dev_is_dma_coherent(dev)); } -int xen_create_contiguous_region(phys_addr_t pstart, unsigned int order, - unsigned int address_bits, - dma_addr_t *dma_handle) -{ - if (!xen_initial_domain()) - return -EINVAL; - - /* we assume that dom0 is mapped 1:1 for now */ - *dma_handle = pstart; - return 0; -} - -void xen_destroy_contiguous_region(phys_addr_t pstart, unsigned int order) -{ - return; -} - static int __init xen_mm_init(void) { struct gnttab_cache_flush cflush; @@ -143,10 +124,13 @@ static int __init xen_mm_init(void) if (!xen_swiotlb_detect()) return 0; - rc = xen_swiotlb_init(); /* we can work with the default swiotlb */ - if (rc < 0 && rc != -EEXIST) - return rc; + if (!io_tlb_default_mem.nslabs) { + rc = swiotlb_init_late(swiotlb_size_or_default(), + xen_swiotlb_gfp(), NULL); + if (rc < 0) + return rc; + } cflush.op = 0; cflush.a.dev_bus_addr = 0; |