summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig125
-rw-r--r--arch/arm/Kconfig.debug6
-rw-r--r--arch/arm/Makefile2
-rw-r--r--arch/arm/boot/compressed/Makefile4
-rw-r--r--arch/arm/boot/compressed/head-at91rm9200.S81
-rw-r--r--arch/arm/boot/compressed/head.S17
-rw-r--r--arch/arm/common/it8152.c10
-rw-r--r--arch/arm/common/rtctime.c1
-rw-r--r--arch/arm/common/time-acorn.c2
-rw-r--r--arch/arm/configs/at91cap9adk_defconfig1143
-rw-r--r--arch/arm/configs/colibri_defconfig1481
-rw-r--r--arch/arm/configs/collie_defconfig1
-rw-r--r--arch/arm/configs/eseries_pxa_defconfig1499
-rw-r--r--arch/arm/configs/iop13xx_defconfig156
-rw-r--r--arch/arm/configs/iop32x_defconfig207
-rw-r--r--arch/arm/configs/iop33x_defconfig154
-rw-r--r--arch/arm/configs/ixp4xx_defconfig982
-rw-r--r--arch/arm/configs/littleton_defconfig783
-rw-r--r--arch/arm/configs/msm_defconfig895
-rw-r--r--arch/arm/configs/orion_defconfig1384
-rw-r--r--arch/arm/configs/pcm027_defconfig1096
-rw-r--r--arch/arm/kernel/Makefile2
-rw-r--r--arch/arm/kernel/atags.c86
-rw-r--r--arch/arm/kernel/atags.h5
-rw-r--r--arch/arm/kernel/calls.S2
-rw-r--r--arch/arm/kernel/dma-isa.c2
-rw-r--r--arch/arm/kernel/entry-armv.S63
-rw-r--r--arch/arm/kernel/entry-common.S2
-rw-r--r--arch/arm/kernel/kprobes-decode.c1529
-rw-r--r--arch/arm/kernel/kprobes.c447
-rw-r--r--arch/arm/kernel/machine_kexec.c2
-rw-r--r--arch/arm/kernel/relocate_kernel.S30
-rw-r--r--arch/arm/kernel/setup.c33
-rw-r--r--arch/arm/kernel/smp.c41
-rw-r--r--arch/arm/kernel/time.c17
-rw-r--r--arch/arm/kernel/traps.c21
-rw-r--r--arch/arm/kernel/vmlinux.lds.S11
-rw-r--r--arch/arm/mach-aaec2000/core.c4
-rw-r--r--arch/arm/mach-at91/Kconfig68
-rw-r--r--arch/arm/mach-at91/Makefile23
-rw-r--r--arch/arm/mach-at91/Makefile.boot7
-rw-r--r--arch/arm/mach-at91/at91cap9.c365
-rw-r--r--arch/arm/mach-at91/at91cap9_devices.c1066
-rw-r--r--arch/arm/mach-at91/at91rm9200.c30
-rw-r--r--arch/arm/mach-at91/at91rm9200_devices.c350
-rw-r--r--arch/arm/mach-at91/at91sam9260.c28
-rw-r--r--arch/arm/mach-at91/at91sam9260_devices.c315
-rw-r--r--arch/arm/mach-at91/at91sam9261.c28
-rw-r--r--arch/arm/mach-at91/at91sam9261_devices.c366
-rw-r--r--arch/arm/mach-at91/at91sam9263.c30
-rw-r--r--arch/arm/mach-at91/at91sam9263_devices.c382
-rw-r--r--arch/arm/mach-at91/at91sam926x_time.c3
-rw-r--r--arch/arm/mach-at91/at91sam9rl_devices.c346
-rw-r--r--arch/arm/mach-at91/board-cap9adk.c359
-rw-r--r--arch/arm/mach-at91/board-csb337.c85
-rw-r--r--arch/arm/mach-at91/board-dk.c10
-rw-r--r--arch/arm/mach-at91/board-ek.c30
-rw-r--r--arch/arm/mach-at91/board-sam9261ek.c84
-rw-r--r--arch/arm/mach-at91/board-sam9263ek.c80
-rw-r--r--arch/arm/mach-at91/clock.c2
-rw-r--r--arch/arm/mach-at91/generic.h5
-rw-r--r--arch/arm/mach-at91/gpio.c151
-rw-r--r--arch/arm/mach-at91/leds.c68
-rw-r--r--arch/arm/mach-at91/pm.c22
-rw-r--r--arch/arm/mach-clps711x/time.c2
-rw-r--r--arch/arm/mach-clps7500/core.c4
-rw-r--r--arch/arm/mach-ebsa110/core.c4
-rw-r--r--arch/arm/mach-ep93xx/core.c262
-rw-r--r--arch/arm/mach-footbridge/dc21285-timer.c4
-rw-r--r--arch/arm/mach-footbridge/isa-timer.c2
-rw-r--r--arch/arm/mach-h720x/cpu-h7201.c4
-rw-r--r--arch/arm/mach-h720x/cpu-h7202.c2
-rw-r--r--arch/arm/mach-imx/Makefile3
-rw-r--r--arch/arm/mach-integrator/core.c4
-rw-r--r--arch/arm/mach-integrator/integrator_ap.c2
-rw-r--r--arch/arm/mach-integrator/pci_v3.c8
-rw-r--r--arch/arm/mach-iop32x/glantank.c15
-rw-r--r--arch/arm/mach-ixp2000/core.c4
-rw-r--r--arch/arm/mach-ixp23xx/core.c1
-rw-r--r--arch/arm/mach-ixp23xx/espresso.c2
-rw-r--r--arch/arm/mach-ixp23xx/ixdp2351.c2
-rw-r--r--arch/arm/mach-ixp23xx/roadrunner.c2
-rw-r--r--arch/arm/mach-ixp4xx/Kconfig14
-rw-r--r--arch/arm/mach-ixp4xx/Makefile8
-rw-r--r--arch/arm/mach-ixp4xx/avila-setup.c14
-rw-r--r--arch/arm/mach-ixp4xx/common.c10
-rw-r--r--arch/arm/mach-ixp4xx/dsmg600-power.c125
-rw-r--r--arch/arm/mach-ixp4xx/dsmg600-setup.c147
-rw-r--r--arch/arm/mach-ixp4xx/ixdp425-setup.c43
-rw-r--r--arch/arm/mach-ixp4xx/ixp4xx_npe.c741
-rw-r--r--arch/arm/mach-ixp4xx/ixp4xx_qmgr.c274
-rw-r--r--arch/arm/mach-ixp4xx/nas100d-power.c69
-rw-r--r--arch/arm/mach-ixp4xx/nas100d-setup.c188
-rw-r--r--arch/arm/mach-ixp4xx/nslu2-power.c92
-rw-r--r--arch/arm/mach-ixp4xx/nslu2-setup.c151
-rw-r--r--arch/arm/mach-ks8695/Makefile2
-rw-r--r--arch/arm/mach-ks8695/board-micrel.c2
-rw-r--r--arch/arm/mach-ks8695/gpio.c83
-rw-r--r--arch/arm/mach-ks8695/pci.c326
-rw-r--r--arch/arm/mach-ks8695/time.c3
-rw-r--r--arch/arm/mach-lh7a40x/time.c4
-rw-r--r--arch/arm/mach-msm/Kconfig18
-rw-r--r--arch/arm/mach-msm/Makefile7
-rw-r--r--arch/arm/mach-msm/Makefile.boot3
-rw-r--r--arch/arm/mach-msm/board-halibut.c114
-rw-r--r--arch/arm/mach-msm/common.c116
-rw-r--r--arch/arm/mach-msm/dma.c214
-rw-r--r--arch/arm/mach-msm/idle.S36
-rw-r--r--arch/arm/mach-msm/io.c85
-rw-r--r--arch/arm/mach-msm/irq.c154
-rw-r--r--arch/arm/mach-msm/timer.c205
-rw-r--r--arch/arm/mach-mx3/time.c4
-rw-r--r--arch/arm/mach-netx/Makefile3
-rw-r--r--arch/arm/mach-netx/time.c4
-rw-r--r--arch/arm/mach-omap1/board-fsample.c16
-rw-r--r--arch/arm/mach-omap1/board-h2.c4
-rw-r--r--arch/arm/mach-omap1/board-h3.c4
-rw-r--r--arch/arm/mach-omap1/board-innovator.c4
-rw-r--r--arch/arm/mach-omap1/board-nokia770.c5
-rw-r--r--arch/arm/mach-omap1/board-osk.c6
-rw-r--r--arch/arm/mach-omap1/board-palmtt.c1
-rw-r--r--arch/arm/mach-omap1/board-palmz71.c1
-rw-r--r--arch/arm/mach-omap1/board-perseus2.c16
-rw-r--r--arch/arm/mach-omap1/board-voiceblue.c2
-rw-r--r--arch/arm/mach-omap1/leds-osk.c2
-rw-r--r--arch/arm/mach-omap1/pm.c25
-rw-r--r--arch/arm/mach-omap2/board-2430sdp.c2
-rw-r--r--arch/arm/mach-omap2/board-apollon.c3
-rw-r--r--arch/arm/mach-omap2/timer-gp.c4
-rw-r--r--arch/arm/mach-orion/Kconfig41
-rw-r--r--arch/arm/mach-orion/Makefile6
-rw-r--r--arch/arm/mach-orion/Makefile.boot3
-rw-r--r--arch/arm/mach-orion/addr-map.c484
-rw-r--r--arch/arm/mach-orion/common.c315
-rw-r--r--arch/arm/mach-orion/common.h78
-rw-r--r--arch/arm/mach-orion/db88f5281-setup.c364
-rw-r--r--arch/arm/mach-orion/dns323-setup.c322
-rw-r--r--arch/arm/mach-orion/gpio.c225
-rw-r--r--arch/arm/mach-orion/irq.c241
-rw-r--r--arch/arm/mach-orion/kurobox_pro-setup.c234
-rw-r--r--arch/arm/mach-orion/pci.c557
-rw-r--r--arch/arm/mach-orion/rd88f5182-setup.c306
-rw-r--r--arch/arm/mach-orion/time.c181
-rw-r--r--arch/arm/mach-orion/ts209-setup.c335
-rw-r--r--arch/arm/mach-pnx4008/time.c4
-rw-r--r--arch/arm/mach-pxa/Kconfig73
-rw-r--r--arch/arm/mach-pxa/Makefile18
-rw-r--r--arch/arm/mach-pxa/akita-ioexp.c2
-rw-r--r--arch/arm/mach-pxa/cm-x270-pci.c18
-rw-r--r--arch/arm/mach-pxa/cm-x270.c10
-rw-r--r--arch/arm/mach-pxa/colibri.c134
-rw-r--r--arch/arm/mach-pxa/corgi.c189
-rw-r--r--arch/arm/mach-pxa/corgi_lcd.c299
-rw-r--r--arch/arm/mach-pxa/corgi_ssp.c3
-rw-r--r--arch/arm/mach-pxa/cpu-pxa.c294
-rw-r--r--arch/arm/mach-pxa/devices.c663
-rw-r--r--arch/arm/mach-pxa/devices.h12
-rw-r--r--arch/arm/mach-pxa/eseries.c101
-rw-r--r--arch/arm/mach-pxa/generic.c361
-rw-r--r--arch/arm/mach-pxa/generic.h4
-rw-r--r--arch/arm/mach-pxa/gpio.c197
-rw-r--r--arch/arm/mach-pxa/idp.c2
-rw-r--r--arch/arm/mach-pxa/irq.c64
-rw-r--r--arch/arm/mach-pxa/littleton.c325
-rw-r--r--arch/arm/mach-pxa/lpd270.c3
-rw-r--r--arch/arm/mach-pxa/lubbock.c32
-rw-r--r--arch/arm/mach-pxa/magician.c218
-rw-r--r--arch/arm/mach-pxa/mainstone.c81
-rw-r--r--arch/arm/mach-pxa/mfp.c266
-rw-r--r--arch/arm/mach-pxa/pcm027.c217
-rw-r--r--arch/arm/mach-pxa/pcm990-baseboard.c330
-rw-r--r--arch/arm/mach-pxa/pm.c33
-rw-r--r--arch/arm/mach-pxa/poodle.c14
-rw-r--r--arch/arm/mach-pxa/pxa25x.c79
-rw-r--r--arch/arm/mach-pxa/pxa27x.c114
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c314
-rw-r--r--arch/arm/mach-pxa/sharpsl.h19
-rw-r--r--arch/arm/mach-pxa/sleep.S117
-rw-r--r--arch/arm/mach-pxa/smemc.c88
-rw-r--r--arch/arm/mach-pxa/spitz.c113
-rw-r--r--arch/arm/mach-pxa/ssp.c386
-rw-r--r--arch/arm/mach-pxa/standby.S83
-rw-r--r--arch/arm/mach-pxa/time.c84
-rw-r--r--arch/arm/mach-pxa/tosa.c21
-rw-r--r--arch/arm/mach-pxa/trizeps4.c7
-rw-r--r--arch/arm/mach-pxa/zylonite.c96
-rw-r--r--arch/arm/mach-pxa/zylonite_pxa300.c65
-rw-r--r--arch/arm/mach-pxa/zylonite_pxa320.c45
-rw-r--r--arch/arm/mach-realview/Kconfig21
-rw-r--r--arch/arm/mach-realview/Makefile3
-rw-r--r--arch/arm/mach-realview/core.c181
-rw-r--r--arch/arm/mach-realview/core.h71
-rw-r--r--arch/arm/mach-realview/localtimer.c144
-rw-r--r--arch/arm/mach-realview/platsmp.c20
-rw-r--r--arch/arm/mach-realview/realview_eb.c234
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c3
-rw-r--r--arch/arm/mach-s3c2410/mach-vr1000.c1
-rw-r--r--arch/arm/mach-s3c2410/s3c2410.c2
-rw-r--r--arch/arm/mach-s3c2410/usb-simtec.c2
-rw-r--r--arch/arm/mach-s3c2412/Kconfig1
-rw-r--r--arch/arm/mach-s3c2412/Makefile3
-rw-r--r--arch/arm/mach-s3c2412/clock.c54
-rw-r--r--arch/arm/mach-s3c2412/dma.c48
-rw-r--r--arch/arm/mach-s3c2412/gpio.c60
-rw-r--r--arch/arm/mach-s3c2412/irq.c24
-rw-r--r--arch/arm/mach-s3c2412/pm.c18
-rw-r--r--arch/arm/mach-s3c2412/s3c2412.c4
-rw-r--r--arch/arm/mach-s3c2412/sleep.S68
-rw-r--r--arch/arm/mach-s3c2440/clock.c22
-rw-r--r--arch/arm/mach-s3c2440/mach-osiris.c2
-rw-r--r--arch/arm/mach-s3c2442/clock.c22
-rw-r--r--arch/arm/mach-s3c2443/s3c2443.c2
-rw-r--r--arch/arm/mach-sa1100/collie_pm.c2
-rw-r--r--arch/arm/mach-sa1100/generic.c2
-rw-r--r--arch/arm/mach-sa1100/irq.c2
-rw-r--r--arch/arm/mach-sa1100/ssp.c3
-rw-r--r--arch/arm/mach-sa1100/time.c42
-rw-r--r--arch/arm/mach-shark/core.c2
-rw-r--r--arch/arm/mm/Kconfig32
-rw-r--r--arch/arm/mm/Makefile1
-rw-r--r--arch/arm/mm/fault.c31
-rw-r--r--arch/arm/mm/ioremap.c2
-rw-r--r--arch/arm/mm/pgd.c8
-rw-r--r--arch/arm/mm/proc-feroceon.S506
-rw-r--r--arch/arm/oprofile/common.c2
-rw-r--r--arch/arm/plat-iop/time.c4
-rw-r--r--arch/arm/plat-omap/debug-devices.c2
-rw-r--r--arch/arm/plat-omap/gpio.c2
-rw-r--r--arch/arm/plat-omap/mailbox.c18
-rw-r--r--arch/arm/plat-omap/mcbsp.c20
-rw-r--r--arch/arm/plat-s3c24xx/Makefile1
-rw-r--r--arch/arm/plat-s3c24xx/clock.c19
-rw-r--r--arch/arm/plat-s3c24xx/dma.c49
-rw-r--r--arch/arm/plat-s3c24xx/gpio.c29
-rw-r--r--arch/arm/plat-s3c24xx/irq.c4
-rw-r--r--arch/arm/plat-s3c24xx/pm.c247
-rw-r--r--arch/arm/plat-s3c24xx/s3c244x-clock.c137
-rw-r--r--arch/arm/plat-s3c24xx/s3c244x.c4
-rw-r--r--arch/arm/plat-s3c24xx/time.c2
-rw-r--r--arch/arm/tools/mach-types258
-rw-r--r--arch/arm/vfp/vfp.h6
-rw-r--r--arch/arm/vfp/vfpdouble.c14
-rw-r--r--arch/arm/vfp/vfphw.S60
-rw-r--r--arch/arm/vfp/vfpinstr.h6
-rw-r--r--arch/arm/vfp/vfpmodule.c98
245 files changed, 28753 insertions, 3472 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a7e9fea978a6..e19e7744e366 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -10,6 +10,8 @@ config ARM
default y
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
+ select HAVE_OPROFILE
+ select HAVE_KPROBES if (!XIP_KERNEL)
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
@@ -33,6 +35,11 @@ config GENERIC_CLOCKEVENTS
bool
default n
+config GENERIC_CLOCKEVENTS_BROADCAST
+ bool
+ depends on GENERIC_CLOCKEVENTS
+ default y if SMP && !LOCAL_TIMERS
+
config MMU
bool
default y
@@ -91,6 +98,11 @@ config GENERIC_IRQ_PROBE
bool
default y
+config GENERIC_LOCKBREAK
+ bool
+ default y
+ depends on SMP && PREEMPT
+
config RWSEM_GENERIC_SPINLOCK
bool
default y
@@ -130,6 +142,23 @@ config FIQ
config ARCH_MTD_XIP
bool
+if OPROFILE
+
+config OPROFILE_ARMV6
+ def_bool y
+ depends on CPU_V6 && !SMP
+ select OPROFILE_ARM11_CORE
+
+config OPROFILE_MPCORE
+ def_bool y
+ depends on CPU_V6 && SMP
+ select OPROFILE_ARM11_CORE
+
+config OPROFILE_ARM11_CORE
+ bool
+
+endif
+
config VECTORS_BASE
hex
default 0xffff0000 if MMU || CPU_HIGH_VECTOR
@@ -163,6 +192,8 @@ config ARCH_REALVIEW
bool "ARM Ltd. RealView family"
select ARM_AMBA
select ICST307
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
help
This enables support for ARM Ltd RealView boards.
@@ -180,8 +211,8 @@ config ARCH_AT91
bool "Atmel AT91"
select GENERIC_GPIO
help
- This enables support for systems based on the Atmel AT91RM9200
- and AT91SAM9xxx processors.
+ This enables support for systems based on the Atmel AT91RM9200,
+ AT91SAM9 and AT91CAP9 processors.
config ARCH_CLPS7500
bool "Cirrus CL-PS7500FE"
@@ -217,6 +248,7 @@ config ARCH_EP93XX
bool "EP93xx-based"
select ARM_AMBA
select ARM_VIC
+ select GENERIC_GPIO
help
This enables support for the Cirrus EP93xx series of CPUs.
@@ -333,6 +365,16 @@ config ARCH_MXC
help
Support for Freescale MXC/iMX-based family of processors
+config ARCH_ORION
+ bool "Marvell Orion"
+ depends on MMU
+ select PCI
+ select GENERIC_GPIO
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ help
+ Support for Marvell Orion System on Chip family.
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
help
@@ -343,8 +385,10 @@ config ARCH_PXA
depends on MMU
select ARCH_MTD_XIP
select GENERIC_GPIO
+ select HAVE_GPIO_LIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select TICK_ONESHOT
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
@@ -366,6 +410,7 @@ config ARCH_SA1100
select ARCH_DISCONTIGMEM_ENABLE
select ARCH_MTD_XIP
select GENERIC_GPIO
+ select GENERIC_TIME
help
Support for StrongARM 11x0 based boards.
@@ -409,6 +454,17 @@ config ARCH_OMAP
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
+config ARCH_MSM7X00A
+ bool "Qualcomm MSM7X00A"
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ help
+ Support for Qualcomm MSM7X00A based systems. This runs on the ARM11
+ apps processor of the MSM7X00A and depends on a shared memory
+ interface to the ARM9 modem processor which runs the baseband stack
+ and controls some vital subsystems (clock and power control, etc).
+ <http://www.cdmatech.com/products/msm7200_chipset_solution.jsp>
+
endchoice
source "arch/arm/mach-clps711x/Kconfig"
@@ -441,6 +497,8 @@ source "arch/arm/mach-omap1/Kconfig"
source "arch/arm/mach-omap2/Kconfig"
+source "arch/arm/mach-orion/Kconfig"
+
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s3c/Kconfig"
@@ -477,6 +535,8 @@ source "arch/arm/mach-davinci/Kconfig"
source "arch/arm/mach-ks8695/Kconfig"
+source "arch/arm/mach-msm/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
@@ -537,18 +597,13 @@ config ISA_DMA_API
bool
config PCI
- bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695
+ bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
VESA. If you have PCI, say Y, otherwise N.
- The PCI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, contains valuable
- information about which PCI hardware does work under Linux and which
- doesn't.
-
config PCI_SYSCALL
def_bool PCI
@@ -558,6 +613,12 @@ config PCI_HOST_VIA82C505
depends on PCI && ARCH_SHARK
default y
+config PCI_HOST_ITE8152
+ bool
+ depends on PCI && MACH_ARMCORE
+ default y
+ select DMABOUNCE
+
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
@@ -570,7 +631,7 @@ source "kernel/time/Kconfig"
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
- depends on EXPERIMENTAL && REALVIEW_MPCORE
+ depends on EXPERIMENTAL && REALVIEW_EB_ARM11MP
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
@@ -582,8 +643,7 @@ config SMP
processor machines. On a single processor machine, the kernel will
run faster if you say N here.
- See also the <file:Documentation/smp.txt>,
- <file:Documentation/i386/IO-APIC.txt>,
+ See also <file:Documentation/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://www.linuxdoc.org/docs.html#howto>.
@@ -604,7 +664,7 @@ config HOTPLUG_CPU
config LOCAL_TIMERS
bool "Use local timer interrupts"
- depends on SMP && REALVIEW_MPCORE
+ depends on SMP && REALVIEW_EB_ARM11MP
default y
help
Enable support for local timers on SMP platforms, rather then the
@@ -651,6 +711,7 @@ config HZ
default 128 if ARCH_L7200
default 200 if ARCH_EBSA110 || ARCH_S3C2410
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
+ default AT91_TIMER_HZ if ARCH_AT91
default 100
config AEABI
@@ -710,7 +771,7 @@ config LEDS
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \
- ARCH_KS8695
+ ARCH_KS8695 || MACH_RD88F5182
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.
@@ -859,9 +920,16 @@ config KEXEC
initially work for you. It may help to enable device hotplugging
support.
+config ATAGS_PROC
+ bool "Export atags in procfs"
+ default n
+ help
+ Should the atags used to boot the kernel be exported in an "atags"
+ file in procfs. Useful with kexec.
+
endmenu
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX )
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
menu "CPU Frequency scaling"
@@ -897,6 +965,12 @@ config CPU_FREQ_IMX
If in doubt, say N.
+config CPU_FREQ_PXA
+ bool
+ depends on CPU_FREQ && ARCH_PXA && PXA25x
+ default y
+ select CPU_FREQ_DEFAULT_GOV_USERSPACE
+
endmenu
endif
@@ -945,7 +1019,7 @@ config FPE_FASTFPE
config VFP
bool "VFP-format floating point maths"
- depends on CPU_V6 || CPU_ARM926T
+ depends on CPU_V6 || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
help
Say Y to include VFP support code in the kernel. This is needed
if your hardware includes a VFP unit.
@@ -955,6 +1029,18 @@ config VFP
Say N if your target does not have VFP hardware.
+config VFPv3
+ bool
+ depends on VFP
+ default y if CPU_V7
+
+config NEON
+ bool "Advanced SIMD (NEON) Extension support"
+ depends on VFPv3 && CPU_V7
+ help
+ Say Y to include support code for NEON, the ARMv7 Advanced SIMD
+ Extension.
+
endmenu
menu "Userspace binary formats"
@@ -977,6 +1063,9 @@ menu "Power management options"
source "kernel/power/Kconfig"
+config ARCH_SUSPEND_POSSIBLE
+ def_bool y
+
endmenu
source "net/Kconfig"
@@ -1034,6 +1123,8 @@ source "drivers/i2c/Kconfig"
source "drivers/spi/Kconfig"
+source "drivers/gpio/Kconfig"
+
source "drivers/w1/Kconfig"
source "drivers/power/Kconfig"
@@ -1066,12 +1157,12 @@ source "drivers/rtc/Kconfig"
source "drivers/dma/Kconfig"
+source "drivers/dca/Kconfig"
+
endmenu
source "fs/Kconfig"
-source "kernel/Kconfig.instrumentation"
-
source "arch/arm/Kconfig.debug"
source "security/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 18101f5f5f24..192ee01a9ba2 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -43,6 +43,12 @@ config DEBUG_ERRORS
you are concerned with the code size or don't want to see these
messages.
+config DEBUG_STACK_USAGE
+ bool "Enable stack utilization instrumentation"
+ depends on DEBUG_KERNEL
+ help
+ Enables the display of the minimum amount of free stack which each
+ task has ever had available in the sysrq-T output.
# These options are only for real kernel hackers who want to get their hands dirty.
config DEBUG_LL
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 35e56c99ad1d..7b8ff66febe1 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -139,6 +139,8 @@ endif
machine-$(CONFIG_ARCH_KS8695) := ks8695
incdir-$(CONFIG_ARCH_MXC) := mxc
machine-$(CONFIG_ARCH_MX3) := mx3
+ machine-$(CONFIG_ARCH_ORION) := orion
+ machine-$(CONFIG_ARCH_MSM7X00A) := msm
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 5fde99f9d9f9..de9d9ee50958 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -44,10 +44,6 @@ ifeq ($(CONFIG_PXA_SHARPSL),y)
OBJS += head-sharpsl.o
endif
-ifeq ($(CONFIG_ARCH_AT91RM9200),y)
-OBJS += head-at91rm9200.o
-endif
-
ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
ifeq ($(CONFIG_CPU_CP15),y)
OBJS += big-endian.o
diff --git a/arch/arm/boot/compressed/head-at91rm9200.S b/arch/arm/boot/compressed/head-at91rm9200.S
deleted file mode 100644
index 11782ccd93a1..000000000000
--- a/arch/arm/boot/compressed/head-at91rm9200.S
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * linux/arch/arm/boot/compressed/head-at91rm9200.S
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach-types.h>
-
- .section ".start", "ax"
-
- @ Atmel AT91RM9200-DK : 262
- mov r3, #(MACH_TYPE_AT91RM9200DK & 0xff)
- orr r3, r3, #(MACH_TYPE_AT91RM9200DK & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Cogent CSB337 : 399
- mov r3, #(MACH_TYPE_CSB337 & 0xff)
- orr r3, r3, #(MACH_TYPE_CSB337 & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Cogent CSB637 : 648
- mov r3, #(MACH_TYPE_CSB637 & 0xff)
- orr r3, r3, #(MACH_TYPE_CSB637 & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Atmel AT91RM9200-EK : 705
- mov r3, #(MACH_TYPE_AT91RM9200EK & 0xff)
- orr r3, r3, #(MACH_TYPE_AT91RM9200EK & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Conitec Carmeva : 769
- mov r3, #(MACH_TYPE_CARMEVA & 0xff)
- orr r3, r3, #(MACH_TYPE_CARMEVA & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ KwikByte KB920x : 612
- mov r3, #(MACH_TYPE_KB9200 & 0xff)
- orr r3, r3, #(MACH_TYPE_KB9200 & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Embest ATEB9200 : 923
- mov r3, #(MACH_TYPE_ATEB9200 & 0xff)
- orr r3, r3, #(MACH_TYPE_ATEB9200 & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Sperry-Sun KAFA : 662
- mov r3, #(MACH_TYPE_KAFA & 0xff)
- orr r3, r3, #(MACH_TYPE_KAFA & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ picotux 200 : 963
- mov r3, #(MACH_TYPE_PICOTUX2XX & 0xff)
- orr r3, r3, #(MACH_TYPE_PICOTUX2XX & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Ajeco 1ARM : 1075
- mov r3, #(MACH_TYPE_ONEARM & 0xff)
- orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Unknown board, use the AT91RM9200DK board
- @ mov r7, #MACH_TYPE_AT91RM9200
- mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff)
- orr r7, r7, #(MACH_TYPE_AT91RM9200DK & 0xff00)
-
-99:
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index b9b03eda70e5..3c2c8f2a1dc4 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -31,7 +31,7 @@
.macro loadsp, rb
.endm
.macro writeb, ch, rb
- mcr p14, 0, \ch, c0, c1, 0
+ mcr p14, 0, \ch, c1, c0, 0
.endm
#endif
@@ -623,6 +623,12 @@ proc_types:
b __armv4_mmu_cache_off
b __armv4_mmu_cache_flush
+ .word 0x56055310 @ Feroceon
+ .word 0xfffffff0
+ b __armv4_mmu_cache_on
+ b __armv4_mmu_cache_off
+ b __armv5tej_mmu_cache_flush
+
@ These match on the architecture ID
.word 0x00020000 @ ARMv4T
@@ -641,7 +647,7 @@ proc_types:
.word 0x000f0000
b __armv4_mmu_cache_on
b __armv4_mmu_cache_off
- b __armv4_mmu_cache_flush
+ b __armv5tej_mmu_cache_flush
.word 0x0007b000 @ ARMv6
.word 0x000ff000
@@ -821,6 +827,13 @@ iflush:
mcr p15, 0, r10, c7, c10, 4 @ drain WB
mov pc, lr
+__armv5tej_mmu_cache_flush:
+1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate D cache
+ bne 1b
+ mcr p15, 0, r0, c7, c5, 0 @ flush I cache
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
__armv4_mmu_cache_flush:
mov r2, #64*1024 @ default: 32K dcache size (*2)
mov r11, #32 @ default: 32 byte line size
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index c03de9bfd76b..97b7dc13d9aa 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -70,8 +70,6 @@ static inline void it8152_irq(int irq)
{
struct irq_desc *desc;
- printk(KERN_DEBUG "===> %s: irq=%d\n", __FUNCTION__, irq);
-
desc = irq_desc + irq;
desc_handle_irq(irq, desc);
}
@@ -106,8 +104,6 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
int bits_pd, bits_lp, bits_ld;
int i;
- printk(KERN_DEBUG "=> %s: irq = %d\n", __FUNCTION__, irq);
-
while (1) {
/* Read all */
bits_pd = __raw_readl(IT8152_INTC_PDCNIRR);
@@ -293,8 +289,7 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
*/
int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
{
- printk(KERN_DEBUG "%s: %s %llx\n",
- __FUNCTION__, dev->dev.bus_id, mask);
+ dev_dbg(&dev->dev, "%s: %llx\n", __FUNCTION__, mask);
if (mask >= PHYS_OFFSET + SZ_64M - 1)
return 0;
@@ -304,8 +299,7 @@ int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
int
pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
{
- printk(KERN_DEBUG "%s: %s %llx\n",
- __FUNCTION__, dev->dev.bus_id, mask);
+ dev_dbg(&dev->dev, "%s: %llx\n", __FUNCTION__, mask);
if (mask >= PHYS_OFFSET + SZ_64M - 1)
return 0;
diff --git a/arch/arm/common/rtctime.c b/arch/arm/common/rtctime.c
index bf1075e1f571..f53bca46e23c 100644
--- a/arch/arm/common/rtctime.c
+++ b/arch/arm/common/rtctime.c
@@ -20,7 +20,6 @@
#include <linux/capability.h>
#include <linux/device.h>
#include <linux/mutex.h>
-#include <linux/rtc.h>
#include <asm/rtc.h>
#include <asm/semaphore.h>
diff --git a/arch/arm/common/time-acorn.c b/arch/arm/common/time-acorn.c
index 34038eccbba9..d544da414731 100644
--- a/arch/arm/common/time-acorn.c
+++ b/arch/arm/common/time-acorn.c
@@ -69,9 +69,7 @@ void __init ioctime_init(void)
static irqreturn_t
ioc_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
timer_tick();
- write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig
new file mode 100644
index 000000000000..e32e73648129
--- /dev/null
+++ b/arch/arm/configs/at91cap9adk_defconfig
@@ -0,0 +1,1143 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc8
+# Wed Jan 23 22:55:57 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+CONFIG_ARCH_AT91CAP9=y
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91CAP9 Board Type
+#
+CONFIG_MACH_AT91CAP9ADK=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=100
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+CONFIG_LOGO_LINUX_VGA16=y
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/colibri_defconfig b/arch/arm/configs/colibri_defconfig
new file mode 100644
index 000000000000..c3e3418ed4fe
--- /dev/null
+++ b/arch/arm/configs/colibri_defconfig
@@ -0,0 +1,1481 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc3
+# Mon Dec 3 13:36:09 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+CONFIG_MACH_COLIBRI=y
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_PXA27x=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_QUEUE=m
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_PXA_FICP is not set
+# CONFIG_MCS_FIR is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=y
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_DISKONCHIP=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_GENERIC is not set
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=8
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_HOSTAP=y
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_ZD1211RW is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_SERIAL=m
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_UCB1400=y
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_PXA is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SA1100_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+CONFIG_USB_GADGET_DUMMY_HCD=y
+CONFIG_USB_DUMMY_HCD=m
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_PXA is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_LEDS_CLASS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+CONFIG_RTC_DRV_PCF8583=m
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SA1100 is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=1
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-15"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_REED_SOLOMON=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 970c8c772eb7..4264e273202d 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -367,7 +367,6 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_OBSOLETE_CHIPS=y
CONFIG_MTD_SHARP=y
# CONFIG_MTD_XIP is not set
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
new file mode 100644
index 000000000000..ed487b90dbed
--- /dev/null
+++ b/arch/arm/configs/eseries_pxa_defconfig
@@ -0,0 +1,1499 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21-hh17
+# Fri Nov 9 20:23:03 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_BOARD_IRQ_MAP_SMALL is not set
+CONFIG_BOARD_IRQ_MAP_BIG=y
+CONFIG_DMABOUNCE=y
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+CONFIG_TOSHIBA_TMIO_OHCI=y
+CONFIG_ARCH_ESERIES=y
+CONFIG_MACH_E330=y
+CONFIG_MACH_E740=y
+CONFIG_MACH_E750=y
+CONFIG_MACH_E400=y
+CONFIG_MACH_E800=y
+CONFIG_E330_LCD=y
+CONFIG_E740_LCD=y
+CONFIG_E750_LCD=y
+CONFIG_E400_LCD=y
+CONFIG_E800_LCD=y
+CONFIG_ESERIES_UDC=y
+CONFIG_E330_TC6387XB=y
+CONFIG_E740_T7L66XB=y
+CONFIG_E400_T7L66XB=y
+CONFIG_E750_E800_TC6393XB=y
+CONFIG_E740_PCMCIA=m
+CONFIG_E750_PCMCIA=m
+CONFIG_E800_PCMCIA=m
+# CONFIG_MACH_A620 is not set
+# CONFIG_MACH_A716 is not set
+# CONFIG_MACH_A730 is not set
+# CONFIG_ARCH_H1900 is not set
+# CONFIG_ARCH_H2200 is not set
+# CONFIG_MACH_H3900 is not set
+# CONFIG_MACH_H4000 is not set
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_HX2750 is not set
+# CONFIG_ARCH_H5400 is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_HTCUNIVERSAL is not set
+# CONFIG_MACH_HTCALPINE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HTCAPACHE is not set
+# CONFIG_MACH_BLUEANGEL is not set
+
+#
+# HTC_HW6X00
+#
+# CONFIG_MACH_HTCBEETLES is not set
+# CONFIG_MACH_HW6900 is not set
+# CONFIG_MACH_HTCATHENA is not set
+# CONFIG_ARCH_AXIMX3 is not set
+# CONFIG_ARCH_AXIMX5 is not set
+# CONFIG_MACH_X50 is not set
+# CONFIG_ARCH_ROVERP1 is not set
+# CONFIG_ARCH_ROVERP5P is not set
+# CONFIG_MACH_XSCALE_PALMLD is not set
+# CONFIG_MACH_T3XSCALE is not set
+# CONFIG_MACH_RECON is not set
+# CONFIG_MACH_GHI270HG is not set
+# CONFIG_MACH_GHI270 is not set
+# CONFIG_MACH_LOOXC550 is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+CONFIG_PXA25x=y
+
+#
+# Linux As Bootloader
+#
+# CONFIG_LAB is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=m
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+# CONFIG_TXTOFFSET_DELTA is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_DPM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=m
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=6144
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=m
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=m
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=m
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_HOSTAP=m
+# CONFIG_HOSTAP_FIRMWARE is not set
+# CONFIG_HOSTAP_CS is not set
+# CONFIG_ACX is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=m
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_LED_TRIGGER is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_PXA is not set
+# CONFIG_RS232_SERIAL is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_SA1100_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_TIHTC is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+# CONFIG_POWER_SUPPLY is not set
+
+#
+# L3 serial bus support
+#
+# CONFIG_L3 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_ADC is not set
+
+#
+# Compaq/iPAQ Drivers
+#
+
+#
+# Compaq/HP iPAQ Drivers
+#
+# CONFIG_IPAQ_SLEEVE is not set
+# CONFIG_SLEEVE_DEBUG is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_ASIC2 is not set
+# CONFIG_HTC_ASIC3 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_BBKEYS is not set
+# CONFIG_HTC_ASIC3_DS1WM is not set
+# CONFIG_SOC_SAMCOP is not set
+# CONFIG_SOC_HAMCOP is not set
+# CONFIG_SOC_MQ11XX is not set
+CONFIG_SOC_T7L66XB=y
+# CONFIG_SOC_TC6387XB is not set
+CONFIG_SOC_TC6393XB=y
+# CONFIG_SOC_TSC2101 is not set
+# CONFIG_SOC_TSC2200 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CORGI=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_IMAGEON is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+CONFIG_FB_W100=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_VSFB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+CONFIG_FONT_ACORN_8x8=y
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+# CONFIG_SND_RECON is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# SoC audio support
+#
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC=m
+
+#
+# SoC Platforms
+#
+
+#
+# SoC Audio for the Atmel AT91
+#
+
+#
+# SoC Audio for the Intel PXA2xx
+#
+CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_PXA2XX_SOC_AC97=m
+CONFIG_SND_PXA2XX_SOC_E740_WM9705=m
+CONFIG_SND_PXA2XX_SOC_E750_WM9705=m
+CONFIG_SND_PXA2XX_SOC_E800_WM9712=m
+# CONFIG_SND_PXA2XX_SOC_MAGICIAN is not set
+# CONFIG_SND_PXA2XX_SOC_BLUEANGEL is not set
+# CONFIG_SND_PXA2XX_SOC_H5000 is not set
+
+#
+# SoC Audio for the Freescale i.MX
+#
+
+#
+# SoC Audio for the Samsung S3C24XX
+#
+# CONFIG_SND_SOC_AC97_CODEC is not set
+# CONFIG_SND_SOC_WM8711 is not set
+# CONFIG_SND_SOC_WM8510 is not set
+# CONFIG_SND_SOC_WM8731 is not set
+# CONFIG_SND_SOC_WM8750 is not set
+# CONFIG_SND_SOC_WM8753 is not set
+# CONFIG_SND_SOC_WM8772 is not set
+# CONFIG_SND_SOC_WM8971 is not set
+# CONFIG_SND_SOC_WM8956 is not set
+# CONFIG_SND_SOC_WM8960 is not set
+# CONFIG_SND_SOC_WM8976 is not set
+# CONFIG_SND_SOC_WM8974 is not set
+# CONFIG_SND_SOC_WM8980 is not set
+CONFIG_SND_SOC_WM9705=m
+# CONFIG_SND_SOC_WM9713 is not set
+CONFIG_SND_SOC_WM9712=m
+# CONFIG_SND_SOC_UDA1380 is not set
+# CONFIG_SND_SOC_AK4535 is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA2XX=y
+CONFIG_USB_PXA2XX=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_MQ11XX is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_CHAR is not set
+# CONFIG_USB_PXA2XX_GPIO is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_PXA is not set
+CONFIG_MMC_TMIO=y
+# CONFIG_MMC_SAMCOP is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig
index add03c9e5553..988b4d13e76f 100644
--- a/arch/arm/configs/iop13xx_defconfig
+++ b/arch/arm/configs/iop13xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Thu Jul 19 15:57:52 2007
+# Linux kernel version: 2.6.24-rc5
+# Wed Dec 12 16:11:03 2007
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -26,15 +26,11 @@ CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
@@ -45,10 +41,15 @@ CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -69,7 +70,6 @@ CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -130,6 +130,7 @@ CONFIG_ARCH_IOP13XX=y
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
@@ -151,9 +152,12 @@ CONFIG_MACH_IQ81340SC=y
CONFIG_MACH_IQ81340MC=y
#
-# IOP13XX IMU Support
+# Boot options
+#
+
+#
+# Power management
#
-# CONFIG_IOP_IMU is not set
CONFIG_PLAT_IOP=y
#
@@ -185,10 +189,7 @@ CONFIG_PCI=y
CONFIG_PCI_SYSCALL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
#
@@ -207,6 +208,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -246,6 +248,7 @@ CONFIG_BINFMT_AOUT=y
# Power management options
#
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
#
# Networking
@@ -285,6 +288,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -324,10 +328,6 @@ CONFIG_IPV6=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -356,6 +356,7 @@ CONFIG_IPV6=y
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -383,6 +384,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -423,6 +425,7 @@ CONFIG_MTD_PHYSMAP_START=0xfa000000
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -463,6 +466,11 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
#
# SCSI device support
@@ -499,12 +507,9 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
-CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
@@ -515,6 +520,7 @@ CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
@@ -555,14 +561,8 @@ CONFIG_BLK_DEV_DM=y
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -577,6 +577,8 @@ CONFIG_NETDEVICES=y
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
@@ -585,6 +587,7 @@ CONFIG_NETDEV_1000=y
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -592,6 +595,7 @@ CONFIG_E1000_NAPI=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -600,11 +604,14 @@ CONFIG_E1000_NAPI=y
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
@@ -639,7 +646,6 @@ CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -688,12 +694,10 @@ CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
@@ -758,9 +762,9 @@ CONFIG_I2C_IOP3XX=y
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -768,12 +772,13 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -787,14 +792,17 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -806,29 +814,18 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
+# CONFIG_WATCHDOG is not set
#
-# LED drivers
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# LED Triggers
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
@@ -840,14 +837,16 @@ CONFIG_DAB=y
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
#
# Console display driver support
@@ -862,6 +861,7 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -877,16 +877,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
+# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
+CONFIG_DMADEVICES=y
#
-# DMA Engine support
+# DMA Devices
#
+CONFIG_INTEL_IOP_ADMA=y
CONFIG_DMA_ENGINE=y
#
@@ -895,12 +894,6 @@ CONFIG_DMA_ENGINE=y
# CONFIG_NET_DMA is not set
#
-# DMA Devices
-#
-# CONFIG_INTEL_IOATDMA is not set
-CONFIG_INTEL_IOP_ADMA=y
-
-#
# File systems
#
CONFIG_EXT2_FS=y
@@ -912,7 +905,6 @@ CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
@@ -952,7 +944,6 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -969,10 +960,12 @@ CONFIG_ECRYPT_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
@@ -981,10 +974,7 @@ CONFIG_CRAMFS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -1037,10 +1027,6 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
@@ -1081,21 +1067,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1104,6 +1085,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
#
@@ -1112,6 +1094,7 @@ CONFIG_DEBUG_USER=y
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
@@ -1136,6 +1119,7 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=y
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1150,11 +1134,13 @@ CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=y
+# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
#
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index 027aef22b4d1..83f40d4041a6 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Thu Jul 19 16:00:36 2007
+# Linux kernel version: 2.6.24-rc5
+# Wed Dec 12 15:49:08 2007
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -26,15 +26,11 @@ CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
@@ -45,9 +41,14 @@ CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -69,7 +70,6 @@ CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -130,6 +130,7 @@ CONFIG_ARCH_IOP32X=y
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
@@ -153,6 +154,15 @@ CONFIG_ARCH_IQ80321=y
CONFIG_ARCH_IQ31244=y
CONFIG_MACH_N2100=y
CONFIG_IOP3XX_ATU=y
+# CONFIG_MACH_EM7210 is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
CONFIG_PLAT_IOP=y
#
@@ -182,11 +192,8 @@ CONFIG_XSCALE_PMU=y
CONFIG_PCI=y
CONFIG_PCI_SYSCALL=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
@@ -205,6 +212,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -244,6 +252,7 @@ CONFIG_BINFMT_AOUT=y
# Power management options
#
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
#
# Networking
@@ -282,6 +291,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -321,10 +331,6 @@ CONFIG_IPV6=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -353,6 +359,7 @@ CONFIG_IPV6=y
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -382,6 +389,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -417,6 +425,7 @@ CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -459,6 +468,11 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
# CONFIG_IDE is not set
#
@@ -496,12 +510,9 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
@@ -512,6 +523,7 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
@@ -576,6 +588,7 @@ CONFIG_SATA_VITESSE=y
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
@@ -606,14 +619,8 @@ CONFIG_BLK_DEV_DM=y
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -628,6 +635,8 @@ CONFIG_NETDEVICES=y
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
@@ -641,13 +650,16 @@ CONFIG_MII=y
# CONFIG_DM9000 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
@@ -667,6 +679,7 @@ CONFIG_NETDEV_1000=y
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -675,6 +688,7 @@ CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -683,11 +697,14 @@ CONFIG_R8169=y
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
@@ -703,7 +720,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
@@ -732,7 +748,6 @@ CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -781,12 +796,10 @@ CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
@@ -852,9 +865,9 @@ CONFIG_I2C_IOP3XX=y
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -862,12 +875,13 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -881,14 +895,17 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -900,29 +917,18 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
+# CONFIG_WATCHDOG is not set
#
-# LED drivers
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# LED Triggers
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
@@ -935,14 +941,16 @@ CONFIG_DAB=y
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
#
# Console display driver support
@@ -957,6 +965,7 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
@@ -1013,6 +1022,7 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
@@ -1070,28 +1080,66 @@ CONFIG_USB_MON=y
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# Real Time Clock
+# RTC interfaces
#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Engine support
+# I2C RTC drivers
#
-CONFIG_DMA_ENGINE=y
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
#
-# DMA Clients
+# SPI RTC drivers
#
-CONFIG_NET_DMA=y
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
#
# DMA Devices
#
-# CONFIG_INTEL_IOATDMA is not set
CONFIG_INTEL_IOP_ADMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
#
# File systems
@@ -1105,7 +1153,6 @@ CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
@@ -1145,7 +1192,6 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -1162,10 +1208,12 @@ CONFIG_ECRYPT_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
@@ -1174,10 +1222,7 @@ CONFIG_CRAMFS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -1224,26 +1269,17 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1270,10 +1306,13 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
@@ -1285,6 +1324,7 @@ CONFIG_DEBUG_LL=y
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
@@ -1309,6 +1349,7 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=y
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1323,11 +1364,13 @@ CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=y
+# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
#
diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index 721ee64a13f7..917afb5ccfac 100644
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Thu Jul 19 16:05:59 2007
+# Linux kernel version: 2.6.24-rc5
+# Wed Dec 12 16:11:27 2007
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -26,15 +26,11 @@ CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
@@ -45,9 +41,14 @@ CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -69,7 +70,6 @@ CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -130,6 +130,7 @@ CONFIG_ARCH_IOP33X=y
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
@@ -150,6 +151,14 @@ CONFIG_IOP3XX_ATU=y
#
CONFIG_ARCH_IQ80331=y
CONFIG_MACH_IQ80332=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
CONFIG_PLAT_IOP=y
#
@@ -179,11 +188,8 @@ CONFIG_XSCALE_PMU=y
CONFIG_PCI=y
CONFIG_PCI_SYSCALL=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
@@ -202,6 +208,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -241,6 +248,7 @@ CONFIG_BINFMT_AOUT=y
# Power management options
#
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
#
# Networking
@@ -279,6 +287,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -318,10 +327,6 @@ CONFIG_IPV6=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -350,6 +355,7 @@ CONFIG_IPV6=y
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -379,6 +385,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -419,6 +426,7 @@ CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -459,6 +467,11 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
# CONFIG_IDE is not set
#
@@ -496,12 +509,9 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
@@ -512,6 +522,7 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
@@ -552,14 +563,8 @@ CONFIG_BLK_DEV_DM=y
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -574,6 +579,8 @@ CONFIG_NETDEVICES=y
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
@@ -582,6 +589,7 @@ CONFIG_NETDEV_1000=y
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -589,6 +597,7 @@ CONFIG_E1000_NAPI=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -597,11 +606,14 @@ CONFIG_E1000_NAPI=y
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
@@ -636,7 +648,6 @@ CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -685,12 +696,10 @@ CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
@@ -755,9 +764,9 @@ CONFIG_I2C_IOP3XX=y
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -765,12 +774,13 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -784,14 +794,17 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -803,29 +816,18 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
+# CONFIG_WATCHDOG is not set
#
-# LED drivers
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# LED Triggers
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
@@ -837,14 +839,16 @@ CONFIG_DAB=y
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
#
# Console display driver support
@@ -859,6 +863,7 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -874,16 +879,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
+# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
+CONFIG_DMADEVICES=y
#
-# DMA Engine support
+# DMA Devices
#
+CONFIG_INTEL_IOP_ADMA=y
CONFIG_DMA_ENGINE=y
#
@@ -892,12 +896,6 @@ CONFIG_DMA_ENGINE=y
CONFIG_NET_DMA=y
#
-# DMA Devices
-#
-# CONFIG_INTEL_IOATDMA is not set
-CONFIG_INTEL_IOP_ADMA=y
-
-#
# File systems
#
CONFIG_EXT2_FS=y
@@ -909,7 +907,6 @@ CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
@@ -949,7 +946,6 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -969,10 +965,7 @@ CONFIG_CRAMFS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -1019,26 +1012,17 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1065,10 +1049,13 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
@@ -1079,6 +1066,7 @@ CONFIG_DEBUG_LL=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index db850a5689eb..efa0485d2f7e 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -1,69 +1,96 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15
-# Tue Jan 3 03:20:40 2006
+# Linux kernel version: 2.6.24
+# Sun Jan 27 07:33:38 2008
#
CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
@@ -81,28 +108,39 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-CONFIG_ARCH_IXP4XX=y
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
+CONFIG_ARCH_IXP4XX=y
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
@@ -112,8 +150,12 @@ CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
# IXP4xx Platforms
#
-CONFIG_ARCH_AVILA=y
+CONFIG_MACH_NSLU2=y
+CONFIG_MACH_AVILA=y
+CONFIG_MACH_LOFT=y
CONFIG_ARCH_ADI_COYOTE=y
+CONFIG_MACH_GATEWAY7001=y
+CONFIG_MACH_WG302V2=y
CONFIG_ARCH_IXDP425=y
CONFIG_MACH_IXDPG425=y
CONFIG_MACH_IXDP465=y
@@ -121,15 +163,27 @@ CONFIG_MACH_KIXRP435=y
CONFIG_ARCH_IXCDP1100=y
CONFIG_ARCH_PRPMC1100=y
CONFIG_MACH_NAS100D=y
+CONFIG_MACH_DSMG600=y
CONFIG_ARCH_IXDP4XX=y
CONFIG_CPU_IXP46X=y
CONFIG_CPU_IXP43X=y
-# CONFIG_MACH_GTWX5715 is not set
+CONFIG_MACH_GTWX5715=y
#
# IXP4xx Options
#
+CONFIG_DMABOUNCE=y
# CONFIG_IXP4XX_INDIRECT_PCI is not set
+CONFIG_IXP4XX_QMGR=y
+CONFIG_IXP4XX_NPE=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
#
# Processor Type
@@ -140,33 +194,40 @@ CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+# CONFIG_IWMMXT is not set
CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
#
# Bus support
#
-CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
# Kernel Features
#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@@ -175,7 +236,12 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -185,6 +251,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp root=/dev/nfs"
# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
#
# Floating point emulation
@@ -203,13 +270,12 @@ CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
-# CONFIG_APM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
#
# Networking
@@ -219,11 +285,13 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_PACKET=m
+CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -232,9 +300,7 @@ CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
@@ -251,15 +317,18 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
CONFIG_IP_VS=m
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12
@@ -290,6 +359,9 @@ CONFIG_IP_VS_SH=m
# IPVS application helper
#
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
@@ -298,70 +370,57 @@ CONFIG_BRIDGE_NETFILTER=y
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
# CONFIG_IP_NF_MATCH_IPRANGE is not set
-CONFIG_IP_NF_MATCH_MAC=m
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-# CONFIG_IP_NF_MATCH_HELPER is not set
-CONFIG_IP_NF_MATCH_STATE=m
-# CONFIG_IP_NF_MATCH_CONNTRACK is not set
CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_PHYSDEV is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_DCCP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-# CONFIG_IP_NF_MATCH_STRING is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_DSCP is not set
-CONFIG_IP_NF_TARGET_MARK=m
-# CONFIG_IP_NF_TARGET_CLASSIFY is not set
# CONFIG_IP_NF_TARGET_TTL is not set
# CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_ARPTABLES=m
@@ -372,16 +431,9 @@ CONFIG_IP_NF_ARPFILTER=m
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
@@ -397,25 +449,17 @@ CONFIG_LLC=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
+CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
-# CONFIG_NET_DIVERT is not set
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
-
-#
-# QoS and/or fair queueing
-#
CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
@@ -425,6 +469,7 @@ CONFIG_NET_SCH_HTB=m
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=m
+# CONFIG_NET_SCH_RR is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
@@ -449,10 +494,17 @@ CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_SCH_FIFO=y
#
# Network testing
@@ -461,7 +513,18 @@ CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -470,19 +533,14 @@ CONFIG_NET_PKTGEN=m
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
@@ -498,11 +556,14 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -528,7 +589,6 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
@@ -538,6 +598,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP4XX=y
# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -547,7 +608,6 @@ CONFIG_MTD_IXP4XX=y
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
@@ -556,33 +616,24 @@ CONFIG_MTD_IXP4XX=y
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
-# Parallel port support
+# UBI - Unsorted block images
#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -592,17 +643,20 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
@@ -614,24 +668,28 @@ CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
+CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
@@ -639,93 +697,163 @@ CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
CONFIG_BLK_DEV_HPT366=y
+# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+CONFIG_PATA_ARTOP=y
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+CONFIG_PATA_IXP4XX_CF=y
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_IFB is not set
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+CONFIG_IXP4XX_ETH=y
+# CONFIG_AX88796 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
@@ -738,93 +866,76 @@ CONFIG_EEPRO100=y
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_AIRO is not set
-CONFIG_HERMES=y
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_NORTEL_HERMES is not set
-CONFIG_PCI_HERMES=y
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+# Wireless LAN
#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
#
-# Wan interfaces
+# USB Network Adapters
#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
CONFIG_WAN=y
-# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
-# CONFIG_SYNCLINK_SYNCPPP is not set
CONFIG_HDLC=m
-CONFIG_HDLC_RAW=y
+CONFIG_HDLC_RAW=m
# CONFIG_HDLC_RAW_ETH is not set
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-CONFIG_HDLC_X25=y
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+CONFIG_HDLC_X25=m
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300 is not set
+# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
+# CONFIG_DSCC4 is not set
+# CONFIG_IXP4XX_HSS is not set
CONFIG_DLCI=m
-CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
-CONFIG_WAN_ROUTER_DRIVERS=y
+CONFIG_WAN_ROUTER_DRIVERS=m
# CONFIG_CYCLADES_SYNC is not set
# CONFIG_LAPBETHER is not set
# CONFIG_X25_ASY is not set
-
-#
-# ATM drivers
-#
+CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
# CONFIG_ATM_LANAI is not set
@@ -842,20 +953,19 @@ CONFIG_ATM_TCP=m
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -865,7 +975,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -875,8 +984,16 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_IXP4XX_BEEPER=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
@@ -895,7 +1012,9 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -907,51 +1026,17 @@ CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_IXP4XX=m
# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
@@ -969,57 +1054,68 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_IOP3XX is not set
CONFIG_I2C_IXP4XX=y
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
-# Hardware Monitoring support
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -1033,67 +1129,268 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
#
-# Misc devices
+# Watchdog Device Drivers
#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_IXP4XX_WATCHDOG=y
#
-# Multimedia Capabilities Port drivers
+# PCI-based Watchdog Cards
#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
#
-# Multimedia devices
+# USB-based Watchdog Cards
#
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_USBPCWATCHDOG is not set
#
-# Digital Video Broadcasting Devices
+# Sonics Silicon Backplane
#
-# CONFIG_DVB is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
-# USB support
+# USB Input Devices
#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+# CONFIG_USB_ATM is not set
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
#
-# MMC/SD Card support
+# LED drivers
+#
+# CONFIG_LEDS_IXP4XX is not set
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+CONFIG_RTC_DRV_X1205=y
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
#
-# CONFIG_MMC is not set
#
# File systems
@@ -1107,16 +1404,19 @@ CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
@@ -1140,11 +1440,12 @@ CONFIG_DNOTIFY=y
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1156,13 +1457,15 @@ CONFIG_RAMFS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
@@ -1171,10 +1474,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -1186,6 +1486,7 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1193,7 +1494,6 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1213,37 +1513,53 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
@@ -1254,22 +1570,22 @@ CONFIG_DEBUG_LL=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
-# Hardware crypto devices
-#
-
-#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/littleton_defconfig b/arch/arm/configs/littleton_defconfig
new file mode 100644
index 000000000000..1db496908052
--- /dev/null
+++ b/arch/arm/configs/littleton_defconfig
@@ -0,0 +1,783 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc5
+# Fri Dec 21 11:06:19 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+CONFIG_CPU_PXA310=y
+# CONFIG_CPU_PXA320 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_ZYLONITE is not set
+CONFIG_MACH_LITTLETON=y
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_PXA3xx=y
+CONFIG_PXA_SSP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=64M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig
new file mode 100644
index 000000000000..ae4c5e62086a
--- /dev/null
+++ b/arch/arm/configs/msm_defconfig
@@ -0,0 +1,895 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23
+# Wed Nov 7 01:36:45 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_GPIOS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_PANIC_TIMEOUT=0
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_GOLDFISH is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_ARCH_MSM7X00A=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# MSM7200 Board Type
+#
+CONFIG_MACH_HALIBUT=y
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
+# CONFIG_SERIAL_MSM_NOINIT is not set
+CONFIG_MSM_SMD=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_MSM_NAND=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_GOLDFISH_NAND is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+CONFIG_MSM_RMNET=y
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_MEP is not set
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI=y
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_INPUT_GPIO=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DCC_TTY=y
+# CONFIG_GOLDFISH_TTY is not set
+CONFIG_BINDER=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_MSM=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+CONFIG_SENSORS_PCA9633=y
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+CONFIG_SENSORS_AKM8976=y
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_LOW_MEMORY_KILLER=y
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_MSM=y
+# CONFIG_FB_GOLDFISH is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# USB Function Support
+#
+CONFIG_USB_FUNCTION=y
+CONFIG_USB_FUNCTION_MSM_HSUSB=y
+# CONFIG_USB_FUNCTION_NULL is not set
+# CONFIG_USB_FUNCTION_ZERO is not set
+# CONFIG_USB_FUNCTION_LOOPBACK is not set
+CONFIG_USB_FUNCTION_ADB=y
+# CONFIG_MMC is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Android
+#
+# CONFIG_ANDROID_GADGET is not set
+# CONFIG_ANDROID_RAM_CONSOLE is not set
+CONFIG_ANDROID_LOGGER=y
+CONFIG_ANDROID_VIBRATOR=y
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_YAFFS_FS=y
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/orion_defconfig b/arch/arm/configs/orion_defconfig
new file mode 100644
index 000000000000..17a55def1103
--- /dev/null
+++ b/arch/arm/configs/orion_defconfig
@@ -0,0 +1,1384 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc3
+# Wed Nov 28 15:13:57 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+CONFIG_ARCH_ORION=y
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Orion Implementations
+#
+CONFIG_MACH_DB88F5281=y
+CONFIG_MACH_RD88F5182=y
+CONFIG_MACH_KUROBOX_PRO=y
+CONFIG_MACH_DNS323=y
+CONFIG_MACH_TS209=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_FEROCEON=y
+CONFIG_CPU_FEROCEON_OLD_ID=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_FTL=y
+CONFIG_NFTL=y
+# CONFIG_NFTL_RW is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_ORION=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+CONFIG_SCSI_MVSATA=y
+
+#
+# Sata options
+#
+# CONFIG_MV_SATA_SUPPORT_ATAPI is not set
+# CONFIG_MV_SATA_ENABLE_1MB_IOS is not set
+CONFIG_SATA_NO_DEBUG=y
+# CONFIG_SATA_DEBUG_ON_ERROR is not set
+# CONFIG_SATA_FULL_DEBUG is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+CONFIG_SKGE=y
+CONFIG_SKY2=y
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+CONFIG_I2C_MV64XXX=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SPLIT_ISO=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_SL811_HCD=y
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=y
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+CONFIG_RTC_DRV_M41T80=y
+# CONFIG_RTC_DRV_M41T80_WDT is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig
new file mode 100644
index 000000000000..17b9b2469570
--- /dev/null
+++ b/arch/arm/configs/pcm027_defconfig
@@ -0,0 +1,1096 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc6
+# Fri Dec 21 10:52:09 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_MACH_PCM027=y
+CONFIG_MACH_PCM990_BASEBOARD=y
+CONFIG_PXA27x=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_PXA2XX_PCM=y
+CONFIG_SND_PXA2XX_AC97=y
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=m
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=m
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_NFS_DIRECTIO=y
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-15"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 593b56509f4f..00d44c6fbfe9 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -19,6 +19,8 @@ obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o
+obj-$(CONFIG_ATAGS_PROC) += atags.o
obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
diff --git a/arch/arm/kernel/atags.c b/arch/arm/kernel/atags.c
new file mode 100644
index 000000000000..e2e934c38080
--- /dev/null
+++ b/arch/arm/kernel/atags.c
@@ -0,0 +1,86 @@
+#include <linux/slab.h>
+#include <linux/kexec.h>
+#include <linux/proc_fs.h>
+#include <asm/setup.h>
+#include <asm/types.h>
+#include <asm/page.h>
+
+struct buffer {
+ size_t size;
+ char *data;
+};
+static struct buffer tags_buffer;
+
+static int
+read_buffer(char* page, char** start, off_t off, int count,
+ int* eof, void* data)
+{
+ struct buffer *buffer = (struct buffer *)data;
+
+ if (off >= buffer->size) {
+ *eof = 1;
+ return 0;
+ }
+
+ count = min((int) (buffer->size - off), count);
+
+ memcpy(page, &buffer->data[off], count);
+
+ return count;
+}
+
+
+static int
+create_proc_entries(void)
+{
+ struct proc_dir_entry* tags_entry;
+
+ tags_entry = create_proc_read_entry("atags", 0400, &proc_root, read_buffer, &tags_buffer);
+ if (!tags_entry)
+ return -ENOMEM;
+
+ return 0;
+}
+
+
+static char __initdata atags_copy_buf[KEXEC_BOOT_PARAMS_SIZE];
+static char __initdata *atags_copy;
+
+void __init save_atags(const struct tag *tags)
+{
+ atags_copy = atags_copy_buf;
+ memcpy(atags_copy, tags, KEXEC_BOOT_PARAMS_SIZE);
+}
+
+
+static int __init init_atags_procfs(void)
+{
+ struct tag *tag;
+ int error;
+
+ if (!atags_copy) {
+ printk(KERN_WARNING "Exporting ATAGs: No saved tags found\n");
+ return -EIO;
+ }
+
+ for (tag = (struct tag *) atags_copy; tag->hdr.size; tag = tag_next(tag))
+ ;
+
+ tags_buffer.size = ((char *) tag - atags_copy) + sizeof(tag->hdr);
+ tags_buffer.data = kmalloc(tags_buffer.size, GFP_KERNEL);
+ if (tags_buffer.data == NULL)
+ return -ENOMEM;
+ memcpy(tags_buffer.data, atags_copy, tags_buffer.size);
+
+ error = create_proc_entries();
+ if (error) {
+ printk(KERN_ERR "Exporting ATAGs: not enough memory\n");
+ kfree(tags_buffer.data);
+ tags_buffer.size = 0;
+ tags_buffer.data = NULL;
+ }
+
+ return error;
+}
+
+arch_initcall(init_atags_procfs);
diff --git a/arch/arm/kernel/atags.h b/arch/arm/kernel/atags.h
new file mode 100644
index 000000000000..e5f028d214a1
--- /dev/null
+++ b/arch/arm/kernel/atags.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_ATAGS_PROC
+extern void save_atags(struct tag *tags);
+#else
+static inline void save_atags(struct tag *tags) { }
+#endif
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index cecf658e3625..283e14fff993 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -359,7 +359,7 @@
CALL(sys_kexec_load)
CALL(sys_utimensat)
CALL(sys_signalfd)
-/* 350 */ CALL(sys_timerfd)
+/* 350 */ CALL(sys_ni_syscall)
CALL(sys_eventfd)
CALL(sys_fallocate)
#ifndef syscalls_counted
diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c
index 0a3e9ad297d8..2f080a35a2d9 100644
--- a/arch/arm/kernel/dma-isa.c
+++ b/arch/arm/kernel/dma-isa.c
@@ -216,7 +216,7 @@ void __init isa_init_dma(dma_t *dma)
request_dma(DMA_ISA_CASCADE, "cascade");
- for (i = 0; i < sizeof(dma_resources) / sizeof(dma_resources[0]); i++)
+ for (i = 0; i < ARRAY_SIZE(dma_resources); i++)
request_resource(&ioport_resource, dma_resources + i);
}
}
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 29dec080a604..a46d5b456765 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -11,8 +11,8 @@
*
* Low-level vector interface routines
*
- * Note: there is a StrongARM bug in the STMIA rn, {regs}^ instruction that causes
- * it to save wrong values... Be aware!
+ * Note: there is a StrongARM bug in the STMIA rn, {regs}^ instruction
+ * that causes it to save wrong values... Be aware!
*/
#include <asm/memory.h>
@@ -58,6 +58,12 @@
.endm
+#ifdef CONFIG_KPROBES
+ .section .kprobes.text,"ax",%progbits
+#else
+ .text
+#endif
+
/*
* Invalid mode handlers
*/
@@ -112,8 +118,8 @@ common_invalid:
#define SPFIX(code...)
#endif
- .macro svc_entry
- sub sp, sp, #S_FRAME_SIZE
+ .macro svc_entry, stack_hole=0
+ sub sp, sp, #(S_FRAME_SIZE + \stack_hole)
SPFIX( tst sp, #4 )
SPFIX( bicne sp, sp, #4 )
stmib sp, {r1 - r12}
@@ -121,7 +127,7 @@ common_invalid:
ldmia r0, {r1 - r3}
add r5, sp, #S_SP @ here for interlock avoidance
mov r4, #-1 @ "" "" "" ""
- add r0, sp, #S_FRAME_SIZE @ "" "" "" ""
+ add r0, sp, #(S_FRAME_SIZE + \stack_hole)
SPFIX( addne r0, r0, #4 )
str r1, [sp] @ save the "real" r0 copied
@ from the exception stack
@@ -242,7 +248,14 @@ svc_preempt:
.align 5
__und_svc:
+#ifdef CONFIG_KPROBES
+ @ If a kprobe is about to simulate a "stmdb sp..." instruction,
+ @ it obviously needs free stack space which then will belong to
+ @ the saved context.
+ svc_entry 64
+#else
svc_entry
+#endif
@
@ call emulation code, which returns using r9 if it has emulated
@@ -480,6 +493,13 @@ __und_usr:
* co-processor instructions. However, we have to watch out
* for the ARM6/ARM7 SWI bug.
*
+ * NEON is a special case that has to be handled here. Not all
+ * NEON instructions are co-processor instructions, so we have
+ * to make a special case of checking for them. Plus, there's
+ * five groups of them, so we have a table of mask/opcode pairs
+ * to check against, and if any match then we branch off into the
+ * NEON handler code.
+ *
* Emulators may wish to make use of the following registers:
* r0 = instruction opcode.
* r2 = PC+4
@@ -488,6 +508,23 @@ __und_usr:
* lr = unrecognised instruction return address
*/
call_fpe:
+#ifdef CONFIG_NEON
+ adr r6, .LCneon_opcodes
+2:
+ ldr r7, [r6], #4 @ mask value
+ cmp r7, #0 @ end mask?
+ beq 1f
+ and r8, r0, r7
+ ldr r7, [r6], #4 @ opcode bits matching in mask
+ cmp r8, r7 @ NEON instruction?
+ bne 2b
+ get_thread_info r10
+ mov r7, #1
+ strb r7, [r10, #TI_USED_CP + 10] @ mark CP#10 as used
+ strb r7, [r10, #TI_USED_CP + 11] @ mark CP#11 as used
+ b do_vfp @ let VFP handler handle this
+1:
+#endif
tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27
#if defined(CONFIG_CPU_ARM610) || defined(CONFIG_CPU_ARM710)
and r8, r0, #0x0f000000 @ mask out op-code bits
@@ -537,6 +574,20 @@ call_fpe:
mov pc, lr @ CP#14 (Debug)
mov pc, lr @ CP#15 (Control)
+#ifdef CONFIG_NEON
+ .align 6
+
+.LCneon_opcodes:
+ .word 0xfe000000 @ mask
+ .word 0xf2000000 @ opcode
+
+ .word 0xff100000 @ mask
+ .word 0xf4000000 @ opcode
+
+ .word 0x00000000 @ mask
+ .word 0x00000000 @ opcode
+#endif
+
do_fpe:
enable_irq
ldr r4, .LCfp
@@ -555,7 +606,7 @@ do_fpe:
.data
ENTRY(fp_enter)
.word no_fp
- .text
+ .previous
no_fp: mov pc, lr
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 33e6cc2ffd3b..6c90c50a9ee3 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -72,7 +72,7 @@ no_work_pending:
ldr r1, [sp, #S_PSR] @ get calling cpsr
ldr lr, [sp, #S_PC]! @ get pc
msr spsr_cxsf, r1 @ save in spsr_svc
- ldmdb sp, {r0 - lr}^ @ get calling r1 - lr
+ ldmdb sp, {r0 - lr}^ @ get calling r0 - lr
mov r0, r0
add sp, sp, #S_FRAME_SIZE - S_PC
movs pc, lr @ return & move spsr_svc into cpsr
diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
new file mode 100644
index 000000000000..d51bc8b60557
--- /dev/null
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -0,0 +1,1529 @@
+/*
+ * arch/arm/kernel/kprobes-decode.c
+ *
+ * Copyright (C) 2006, 2007 Motorola Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/*
+ * We do not have hardware single-stepping on ARM, This
+ * effort is further complicated by the ARM not having a
+ * "next PC" register. Instructions that change the PC
+ * can't be safely single-stepped in a MP environment, so
+ * we have a lot of work to do:
+ *
+ * In the prepare phase:
+ * *) If it is an instruction that does anything
+ * with the CPU mode, we reject it for a kprobe.
+ * (This is out of laziness rather than need. The
+ * instructions could be simulated.)
+ *
+ * *) Otherwise, decode the instruction rewriting its
+ * registers to take fixed, ordered registers and
+ * setting a handler for it to run the instruction.
+ *
+ * In the execution phase by an instruction's handler:
+ *
+ * *) If the PC is written to by the instruction, the
+ * instruction must be fully simulated in software.
+ * If it is a conditional instruction, the handler
+ * will use insn[0] to copy its condition code to
+ * set r0 to 1 and insn[1] to "mov pc, lr" to return.
+ *
+ * *) Otherwise, a modified form of the instruction is
+ * directly executed. Its handler calls the
+ * instruction in insn[0]. In insn[1] is a
+ * "mov pc, lr" to return.
+ *
+ * Before calling, load up the reordered registers
+ * from the original instruction's registers. If one
+ * of the original input registers is the PC, compute
+ * and adjust the appropriate input register.
+ *
+ * After call completes, copy the output registers to
+ * the original instruction's original registers.
+ *
+ * We don't use a real breakpoint instruction since that
+ * would have us in the kernel go from SVC mode to SVC
+ * mode losing the link register. Instead we use an
+ * undefined instruction. To simplify processing, the
+ * undefined instruction used for kprobes must be reserved
+ * exclusively for kprobes use.
+ *
+ * TODO: ifdef out some instruction decoding based on architecture.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+
+#define sign_extend(x, signbit) ((x) | (0 - ((x) & (1 << (signbit)))))
+
+#define branch_displacement(insn) sign_extend(((insn) & 0xffffff) << 2, 25)
+
+#define PSR_fs (PSR_f|PSR_s)
+
+#define KPROBE_RETURN_INSTRUCTION 0xe1a0f00e /* mov pc, lr */
+#define SET_R0_TRUE_INSTRUCTION 0xe3a00001 /* mov r0, #1 */
+
+#define truecc_insn(insn) (((insn) & 0xf0000000) | \
+ (SET_R0_TRUE_INSTRUCTION & 0x0fffffff))
+
+typedef long (insn_0arg_fn_t)(void);
+typedef long (insn_1arg_fn_t)(long);
+typedef long (insn_2arg_fn_t)(long, long);
+typedef long (insn_3arg_fn_t)(long, long, long);
+typedef long (insn_4arg_fn_t)(long, long, long, long);
+typedef long long (insn_llret_0arg_fn_t)(void);
+typedef long long (insn_llret_3arg_fn_t)(long, long, long);
+typedef long long (insn_llret_4arg_fn_t)(long, long, long, long);
+
+union reg_pair {
+ long long dr;
+#ifdef __LITTLE_ENDIAN
+ struct { long r0, r1; };
+#else
+ struct { long r1, r0; };
+#endif
+};
+
+/*
+ * For STR and STM instructions, an ARM core may choose to use either
+ * a +8 or a +12 displacement from the current instruction's address.
+ * Whichever value is chosen for a given core, it must be the same for
+ * both instructions and may not change. This function measures it.
+ */
+
+static int str_pc_offset;
+
+static void __init find_str_pc_offset(void)
+{
+ int addr, scratch, ret;
+
+ __asm__ (
+ "sub %[ret], pc, #4 \n\t"
+ "str pc, %[addr] \n\t"
+ "ldr %[scr], %[addr] \n\t"
+ "sub %[ret], %[scr], %[ret] \n\t"
+ : [ret] "=r" (ret), [scr] "=r" (scratch), [addr] "+m" (addr));
+
+ str_pc_offset = ret;
+}
+
+/*
+ * The insnslot_?arg_r[w]flags() functions below are to keep the
+ * msr -> *fn -> mrs instruction sequences indivisible so that
+ * the state of the CPSR flags aren't inadvertently modified
+ * just before or just after the call.
+ */
+
+static inline long __kprobes
+insnslot_0arg_rflags(long cpsr, insn_0arg_fn_t *fn)
+{
+ register long ret asm("r0");
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret)
+ : [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ return ret;
+}
+
+static inline long long __kprobes
+insnslot_llret_0arg_rflags(long cpsr, insn_llret_0arg_fn_t *fn)
+{
+ register long ret0 asm("r0");
+ register long ret1 asm("r1");
+ union reg_pair fnr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret0), "=r" (ret1)
+ : [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ fnr.r0 = ret0;
+ fnr.r1 = ret1;
+ return fnr.dr;
+}
+
+static inline long __kprobes
+insnslot_1arg_rflags(long r0, long cpsr, insn_1arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long ret asm("r0");
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret)
+ : "0" (rr0), [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ return ret;
+}
+
+static inline long __kprobes
+insnslot_2arg_rflags(long r0, long r1, long cpsr, insn_2arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long ret asm("r0");
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret)
+ : "0" (rr0), "r" (rr1),
+ [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ return ret;
+}
+
+static inline long __kprobes
+insnslot_3arg_rflags(long r0, long r1, long r2, long cpsr, insn_3arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long rr2 asm("r2") = r2;
+ register long ret asm("r0");
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret)
+ : "0" (rr0), "r" (rr1), "r" (rr2),
+ [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ return ret;
+}
+
+static inline long long __kprobes
+insnslot_llret_3arg_rflags(long r0, long r1, long r2, long cpsr,
+ insn_llret_3arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long rr2 asm("r2") = r2;
+ register long ret0 asm("r0");
+ register long ret1 asm("r1");
+ union reg_pair fnr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret0), "=r" (ret1)
+ : "0" (rr0), "r" (rr1), "r" (rr2),
+ [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ fnr.r0 = ret0;
+ fnr.r1 = ret1;
+ return fnr.dr;
+}
+
+static inline long __kprobes
+insnslot_4arg_rflags(long r0, long r1, long r2, long r3, long cpsr,
+ insn_4arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long rr2 asm("r2") = r2;
+ register long rr3 asm("r3") = r3;
+ register long ret asm("r0");
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret)
+ : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3),
+ [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ return ret;
+}
+
+static inline long __kprobes
+insnslot_1arg_rwflags(long r0, long *cpsr, insn_1arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long ret asm("r0");
+ long oldcpsr = *cpsr;
+ long newcpsr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[oldcpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ "mrs %[newcpsr], cpsr \n\t"
+ : "=r" (ret), [newcpsr] "=r" (newcpsr)
+ : "0" (rr0), [oldcpsr] "r" (oldcpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs);
+ return ret;
+}
+
+static inline long __kprobes
+insnslot_2arg_rwflags(long r0, long r1, long *cpsr, insn_2arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long ret asm("r0");
+ long oldcpsr = *cpsr;
+ long newcpsr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[oldcpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ "mrs %[newcpsr], cpsr \n\t"
+ : "=r" (ret), [newcpsr] "=r" (newcpsr)
+ : "0" (rr0), "r" (rr1), [oldcpsr] "r" (oldcpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs);
+ return ret;
+}
+
+static inline long __kprobes
+insnslot_3arg_rwflags(long r0, long r1, long r2, long *cpsr,
+ insn_3arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long rr2 asm("r2") = r2;
+ register long ret asm("r0");
+ long oldcpsr = *cpsr;
+ long newcpsr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[oldcpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ "mrs %[newcpsr], cpsr \n\t"
+ : "=r" (ret), [newcpsr] "=r" (newcpsr)
+ : "0" (rr0), "r" (rr1), "r" (rr2),
+ [oldcpsr] "r" (oldcpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs);
+ return ret;
+}
+
+static inline long __kprobes
+insnslot_4arg_rwflags(long r0, long r1, long r2, long r3, long *cpsr,
+ insn_4arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long rr2 asm("r2") = r2;
+ register long rr3 asm("r3") = r3;
+ register long ret asm("r0");
+ long oldcpsr = *cpsr;
+ long newcpsr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[oldcpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ "mrs %[newcpsr], cpsr \n\t"
+ : "=r" (ret), [newcpsr] "=r" (newcpsr)
+ : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3),
+ [oldcpsr] "r" (oldcpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs);
+ return ret;
+}
+
+static inline long long __kprobes
+insnslot_llret_4arg_rwflags(long r0, long r1, long r2, long r3, long *cpsr,
+ insn_llret_4arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long rr2 asm("r2") = r2;
+ register long rr3 asm("r3") = r3;
+ register long ret0 asm("r0");
+ register long ret1 asm("r1");
+ long oldcpsr = *cpsr;
+ long newcpsr;
+ union reg_pair fnr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[oldcpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ "mrs %[newcpsr], cpsr \n\t"
+ : "=r" (ret0), "=r" (ret1), [newcpsr] "=r" (newcpsr)
+ : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3),
+ [oldcpsr] "r" (oldcpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs);
+ fnr.r0 = ret0;
+ fnr.r1 = ret1;
+ return fnr.dr;
+}
+
+/*
+ * To avoid the complications of mimicing single-stepping on a
+ * processor without a Next-PC or a single-step mode, and to
+ * avoid having to deal with the side-effects of boosting, we
+ * simulate or emulate (almost) all ARM instructions.
+ *
+ * "Simulation" is where the instruction's behavior is duplicated in
+ * C code. "Emulation" is where the original instruction is rewritten
+ * and executed, often by altering its registers.
+ *
+ * By having all behavior of the kprobe'd instruction completed before
+ * returning from the kprobe_handler(), all locks (scheduler and
+ * interrupt) can safely be released. There is no need for secondary
+ * breakpoints, no race with MP or preemptable kernels, nor having to
+ * clean up resources counts at a later time impacting overall system
+ * performance. By rewriting the instruction, only the minimum registers
+ * need to be loaded and saved back optimizing performance.
+ *
+ * Calling the insnslot_*_rwflags version of a function doesn't hurt
+ * anything even when the CPSR flags aren't updated by the
+ * instruction. It's just a little slower in return for saving
+ * a little space by not having a duplicate function that doesn't
+ * update the flags. (The same optimization can be said for
+ * instructions that do or don't perform register writeback)
+ * Also, instructions can either read the flags, only write the
+ * flags, or read and write the flags. To save combinations
+ * rather than for sheer performance, flag functions just assume
+ * read and write of flags.
+ */
+
+static void __kprobes simulate_bbl(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ long iaddr = (long)p->addr;
+ int disp = branch_displacement(insn);
+
+ if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
+ return;
+
+ if (insn & (1 << 24))
+ regs->ARM_lr = iaddr + 4;
+
+ regs->ARM_pc = iaddr + 8 + disp;
+}
+
+static void __kprobes simulate_blx1(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ long iaddr = (long)p->addr;
+ int disp = branch_displacement(insn);
+
+ regs->ARM_lr = iaddr + 4;
+ regs->ARM_pc = iaddr + 8 + disp + ((insn >> 23) & 0x2);
+ regs->ARM_cpsr |= PSR_T_BIT;
+}
+
+static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rm = insn & 0xf;
+ long rmv = regs->uregs[rm];
+
+ if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
+ return;
+
+ if (insn & (1 << 5))
+ regs->ARM_lr = (long)p->addr + 4;
+
+ regs->ARM_pc = rmv & ~0x1;
+ regs->ARM_cpsr &= ~PSR_T_BIT;
+ if (rmv & 0x1)
+ regs->ARM_cpsr |= PSR_T_BIT;
+}
+
+static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rn = (insn >> 16) & 0xf;
+ int lbit = insn & (1 << 20);
+ int wbit = insn & (1 << 21);
+ int ubit = insn & (1 << 23);
+ int pbit = insn & (1 << 24);
+ long *addr = (long *)regs->uregs[rn];
+ int reg_bit_vector;
+ int reg_count;
+
+ if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
+ return;
+
+ reg_count = 0;
+ reg_bit_vector = insn & 0xffff;
+ while (reg_bit_vector) {
+ reg_bit_vector &= (reg_bit_vector - 1);
+ ++reg_count;
+ }
+
+ if (!ubit)
+ addr -= reg_count;
+ addr += (!pbit ^ !ubit);
+
+ reg_bit_vector = insn & 0xffff;
+ while (reg_bit_vector) {
+ int reg = __ffs(reg_bit_vector);
+ reg_bit_vector &= (reg_bit_vector - 1);
+ if (lbit)
+ regs->uregs[reg] = *addr++;
+ else
+ *addr++ = regs->uregs[reg];
+ }
+
+ if (wbit) {
+ if (!ubit)
+ addr -= reg_count;
+ addr -= (!pbit ^ !ubit);
+ regs->uregs[rn] = (long)addr;
+ }
+}
+
+static void __kprobes simulate_stm1_pc(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+
+ if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
+ return;
+
+ regs->ARM_pc = (long)p->addr + str_pc_offset;
+ simulate_ldm1stm1(p, regs);
+ regs->ARM_pc = (long)p->addr + 4;
+}
+
+static void __kprobes simulate_mov_ipsp(struct kprobe *p, struct pt_regs *regs)
+{
+ regs->uregs[12] = regs->uregs[13];
+}
+
+static void __kprobes emulate_ldcstc(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rn = (insn >> 16) & 0xf;
+ long rnv = regs->uregs[rn];
+
+ /* Save Rn in case of writeback. */
+ regs->uregs[rn] = insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_ldrd(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf; /* rm may be invalid, don't care. */
+
+ /* Not following the C calling convention here, so need asm(). */
+ __asm__ __volatile__ (
+ "ldr r0, %[rn] \n\t"
+ "ldr r1, %[rm] \n\t"
+ "msr cpsr_fs, %[cpsr]\n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[i_fn] \n\t"
+ "str r0, %[rn] \n\t" /* in case of writeback */
+ "str r2, %[rd0] \n\t"
+ "str r3, %[rd1] \n\t"
+ : [rn] "+m" (regs->uregs[rn]),
+ [rd0] "=m" (regs->uregs[rd]),
+ [rd1] "=m" (regs->uregs[rd+1])
+ : [rm] "m" (regs->uregs[rm]),
+ [cpsr] "r" (regs->ARM_cpsr),
+ [i_fn] "r" (i_fn)
+ : "r0", "r1", "r2", "r3", "lr", "cc"
+ );
+}
+
+static void __kprobes emulate_strd(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_4arg_fn_t *i_fn = (insn_4arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+ long rnv = regs->uregs[rn];
+ long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */
+
+ regs->uregs[rn] = insnslot_4arg_rflags(rnv, rmv, regs->uregs[rd],
+ regs->uregs[rd+1],
+ regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_llret_3arg_fn_t *i_fn = (insn_llret_3arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ union reg_pair fnr;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+ long rdv;
+ long rnv = regs->uregs[rn];
+ long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */
+ long cpsr = regs->ARM_cpsr;
+
+ fnr.dr = insnslot_llret_3arg_rflags(rnv, 0, rmv, cpsr, i_fn);
+ regs->uregs[rn] = fnr.r0; /* Save Rn in case of writeback. */
+ rdv = fnr.r1;
+
+ if (rd == 15) {
+#if __LINUX_ARM_ARCH__ >= 5
+ cpsr &= ~PSR_T_BIT;
+ if (rdv & 0x1)
+ cpsr |= PSR_T_BIT;
+ regs->ARM_cpsr = cpsr;
+ rdv &= ~0x1;
+#else
+ rdv &= ~0x2;
+#endif
+ }
+ regs->uregs[rd] = rdv;
+}
+
+static void __kprobes emulate_str(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ long iaddr = (long)p->addr;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+ long rdv = (rd == 15) ? iaddr + str_pc_offset : regs->uregs[rd];
+ long rnv = (rn == 15) ? iaddr + 8 : regs->uregs[rn];
+ long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */
+
+ /* Save Rn in case of writeback. */
+ regs->uregs[rn] =
+ insnslot_3arg_rflags(rnv, rdv, rmv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_mrrc(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_llret_0arg_fn_t *i_fn = (insn_llret_0arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ union reg_pair fnr;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+
+ fnr.dr = insnslot_llret_0arg_rflags(regs->ARM_cpsr, i_fn);
+ regs->uregs[rn] = fnr.r0;
+ regs->uregs[rd] = fnr.r1;
+}
+
+static void __kprobes emulate_mcrr(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ long rnv = regs->uregs[rn];
+ long rdv = regs->uregs[rd];
+
+ insnslot_2arg_rflags(rnv, rdv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_sat(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rm = insn & 0xf;
+ long rmv = regs->uregs[rm];
+
+ /* Writes Q flag */
+ regs->uregs[rd] = insnslot_1arg_rwflags(rmv, &regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_sel(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+ long rnv = regs->uregs[rn];
+ long rmv = regs->uregs[rm];
+
+ /* Reads GE bits */
+ regs->uregs[rd] = insnslot_2arg_rflags(rnv, rmv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_none(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_0arg_fn_t *i_fn = (insn_0arg_fn_t *)&p->ainsn.insn[0];
+
+ insnslot_0arg_rflags(regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_rd12(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_0arg_fn_t *i_fn = (insn_0arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+
+ regs->uregs[rd] = insnslot_0arg_rflags(regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_ird12(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int ird = (insn >> 12) & 0xf;
+
+ insnslot_1arg_rflags(regs->uregs[ird], regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_rn16(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rn = (insn >> 16) & 0xf;
+ long rnv = regs->uregs[rn];
+
+ insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_rd12rm0(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rm = insn & 0xf;
+ long rmv = regs->uregs[rm];
+
+ regs->uregs[rd] = insnslot_1arg_rflags(rmv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_rd12rn16rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+ long rnv = regs->uregs[rn];
+ long rmv = regs->uregs[rm];
+
+ regs->uregs[rd] =
+ insnslot_2arg_rwflags(rnv, rmv, &regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_rd16rn12rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 16) & 0xf;
+ int rn = (insn >> 12) & 0xf;
+ int rs = (insn >> 8) & 0xf;
+ int rm = insn & 0xf;
+ long rnv = regs->uregs[rn];
+ long rsv = regs->uregs[rs];
+ long rmv = regs->uregs[rm];
+
+ regs->uregs[rd] =
+ insnslot_3arg_rwflags(rnv, rsv, rmv, &regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_rd16rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 16) & 0xf;
+ int rs = (insn >> 8) & 0xf;
+ int rm = insn & 0xf;
+ long rsv = regs->uregs[rs];
+ long rmv = regs->uregs[rm];
+
+ regs->uregs[rd] =
+ insnslot_2arg_rwflags(rsv, rmv, &regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_rdhi16rdlo12rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_llret_4arg_fn_t *i_fn = (insn_llret_4arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ union reg_pair fnr;
+ int rdhi = (insn >> 16) & 0xf;
+ int rdlo = (insn >> 12) & 0xf;
+ int rs = (insn >> 8) & 0xf;
+ int rm = insn & 0xf;
+ long rsv = regs->uregs[rs];
+ long rmv = regs->uregs[rm];
+
+ fnr.dr = insnslot_llret_4arg_rwflags(regs->uregs[rdhi],
+ regs->uregs[rdlo], rsv, rmv,
+ &regs->ARM_cpsr, i_fn);
+ regs->uregs[rdhi] = fnr.r0;
+ regs->uregs[rdlo] = fnr.r1;
+}
+
+static void __kprobes
+emulate_alu_imm_rflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn];
+
+ regs->uregs[rd] = insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_alu_imm_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn];
+
+ regs->uregs[rd] = insnslot_1arg_rwflags(rnv, &regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_alu_rflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ long ppc = (long)p->addr + 8;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf; /* rn/rnv/rs/rsv may be */
+ int rs = (insn >> 8) & 0xf; /* invalid, don't care. */
+ int rm = insn & 0xf;
+ long rnv = (rn == 15) ? ppc : regs->uregs[rn];
+ long rmv = (rm == 15) ? ppc : regs->uregs[rm];
+ long rsv = regs->uregs[rs];
+
+ regs->uregs[rd] =
+ insnslot_3arg_rflags(rnv, rmv, rsv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_alu_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ long ppc = (long)p->addr + 8;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf; /* rn/rnv/rs/rsv may be */
+ int rs = (insn >> 8) & 0xf; /* invalid, don't care. */
+ int rm = insn & 0xf;
+ long rnv = (rn == 15) ? ppc : regs->uregs[rn];
+ long rmv = (rm == 15) ? ppc : regs->uregs[rm];
+ long rsv = regs->uregs[rs];
+
+ regs->uregs[rd] =
+ insnslot_3arg_rwflags(rnv, rmv, rsv, &regs->ARM_cpsr, i_fn);
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_ldr_str(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ int ibit = (insn & (1 << 26)) ? 25 : 22;
+
+ insn &= 0xfff00fff;
+ insn |= 0x00001000; /* Rn = r0, Rd = r1 */
+ if (insn & (1 << ibit)) {
+ insn &= ~0xf;
+ insn |= 2; /* Rm = r2 */
+ }
+ asi->insn[0] = insn;
+ asi->insn_handler = (insn & (1 << 20)) ? emulate_ldr : emulate_str;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rd12rm0(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rd12rm0;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rd12(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ insn &= 0xffff0fff; /* Rd = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rd12;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rd12rn16rm0_wflags(kprobe_opcode_t insn,
+ struct arch_specific_insn *asi)
+{
+ insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */
+ insn |= 0x00000001; /* Rm = r1 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rd12rn16rm0_rwflags;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rd16rs8rm0_wflags(kprobe_opcode_t insn,
+ struct arch_specific_insn *asi)
+{
+ insn &= 0xfff0f0f0; /* Rd = r0, Rs = r0 */
+ insn |= 0x00000001; /* Rm = r1 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rd16rs8rm0_rwflags;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rd16rn12rs8rm0_wflags(kprobe_opcode_t insn,
+ struct arch_specific_insn *asi)
+{
+ insn &= 0xfff000f0; /* Rd = r0, Rn = r0 */
+ insn |= 0x00000102; /* Rs = r1, Rm = r2 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rd16rn12rs8rm0_rwflags;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rdhi16rdlo12rs8rm0_wflags(kprobe_opcode_t insn,
+ struct arch_specific_insn *asi)
+{
+ insn &= 0xfff000f0; /* RdHi = r0, RdLo = r1 */
+ insn |= 0x00001203; /* Rs = r2, Rm = r3 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rdhi16rdlo12rs8rm0_rwflags;
+ return INSN_GOOD;
+}
+
+/*
+ * For the instruction masking and comparisons in all the "space_*"
+ * functions below, Do _not_ rearrange the order of tests unless
+ * you're very, very sure of what you are doing. For the sake of
+ * efficiency, the masks for some tests sometimes assume other test
+ * have been done prior to them so the number of patterns to test
+ * for an instruction set can be as broad as possible to reduce the
+ * number of tests needed.
+ */
+
+static enum kprobe_insn __kprobes
+space_1111(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* CPS mmod == 1 : 1111 0001 0000 xx10 xxxx xxxx xx0x xxxx */
+ /* RFE : 1111 100x x0x1 xxxx xxxx 1010 xxxx xxxx */
+ /* SRS : 1111 100x x1x0 1101 xxxx 0101 xxxx xxxx */
+ if ((insn & 0xfff30020) == 0xf1020000 ||
+ (insn & 0xfe500f00) == 0xf8100a00 ||
+ (insn & 0xfe5f0f00) == 0xf84d0500)
+ return INSN_REJECTED;
+
+ /* PLD : 1111 01x1 x101 xxxx xxxx xxxx xxxx xxxx : */
+ if ((insn & 0xfd700000) == 0xf4500000) {
+ insn &= 0xfff0ffff; /* Rn = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rn16;
+ return INSN_GOOD;
+ }
+
+ /* BLX(1) : 1111 101x xxxx xxxx xxxx xxxx xxxx xxxx : */
+ if ((insn & 0xfe000000) == 0xfa000000) {
+ asi->insn_handler = simulate_blx1;
+ return INSN_GOOD_NO_SLOT;
+ }
+
+ /* SETEND : 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */
+ /* CDP2 : 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
+ if ((insn & 0xffff00f0) == 0xf1010000 ||
+ (insn & 0xff000010) == 0xfe000000) {
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_none;
+ return INSN_GOOD;
+ }
+
+ /* MCRR2 : 1111 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */
+ /* MRRC2 : 1111 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */
+ if ((insn & 0xffe00000) == 0xfc400000) {
+ insn &= 0xfff00fff; /* Rn = r0 */
+ insn |= 0x00001000; /* Rd = r1 */
+ asi->insn[0] = insn;
+ asi->insn_handler =
+ (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr;
+ return INSN_GOOD;
+ }
+
+ /* LDC2 : 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
+ /* STC2 : 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
+ if ((insn & 0xfe000000) == 0xfc000000) {
+ insn &= 0xfff0ffff; /* Rn = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_ldcstc;
+ return INSN_GOOD;
+ }
+
+ /* MCR2 : 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
+ /* MRC2 : 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
+ insn &= 0xffff0fff; /* Rd = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* cccc 0001 0xx0 xxxx xxxx xxxx xxxx xxx0 xxxx */
+ if ((insn & 0x0f900010) == 0x01000000) {
+
+ /* BXJ : cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */
+ /* MSR : cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */
+ if ((insn & 0x0ff000f0) == 0x01200020 ||
+ (insn & 0x0fb000f0) == 0x01200000)
+ return INSN_REJECTED;
+
+ /* MRS : cccc 0001 0x00 xxxx xxxx xxxx 0000 xxxx */
+ if ((insn & 0x0fb00010) == 0x01000000)
+ return prep_emulate_rd12(insn, asi);
+
+ /* SMLALxy : cccc 0001 0100 xxxx xxxx xxxx 1xx0 xxxx */
+ if ((insn & 0x0ff00090) == 0x01400080)
+ return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi);
+
+ /* SMULWy : cccc 0001 0010 xxxx xxxx xxxx 1x10 xxxx */
+ /* SMULxy : cccc 0001 0110 xxxx xxxx xxxx 1xx0 xxxx */
+ if ((insn & 0x0ff000b0) == 0x012000a0 ||
+ (insn & 0x0ff00090) == 0x01600080)
+ return prep_emulate_rd16rs8rm0_wflags(insn, asi);
+
+ /* SMLAxy : cccc 0001 0000 xxxx xxxx xxxx 1xx0 xxxx : Q */
+ /* SMLAWy : cccc 0001 0010 xxxx xxxx xxxx 0x00 xxxx : Q */
+ return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+
+ }
+
+ /* cccc 0001 0xx0 xxxx xxxx xxxx xxxx 0xx1 xxxx */
+ else if ((insn & 0x0f900090) == 0x01000010) {
+
+ /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */
+ if ((insn & 0xfff000f0) == 0xe1200070)
+ return INSN_REJECTED;
+
+ /* BLX(2) : cccc 0001 0010 xxxx xxxx xxxx 0011 xxxx */
+ /* BX : cccc 0001 0010 xxxx xxxx xxxx 0001 xxxx */
+ if ((insn & 0x0ff000d0) == 0x01200010) {
+ asi->insn[0] = truecc_insn(insn);
+ asi->insn_handler = simulate_blx2bx;
+ return INSN_GOOD;
+ }
+
+ /* CLZ : cccc 0001 0110 xxxx xxxx xxxx 0001 xxxx */
+ if ((insn & 0x0ff000f0) == 0x01600010)
+ return prep_emulate_rd12rm0(insn, asi);
+
+ /* QADD : cccc 0001 0000 xxxx xxxx xxxx 0101 xxxx :Q */
+ /* QSUB : cccc 0001 0010 xxxx xxxx xxxx 0101 xxxx :Q */
+ /* QDADD : cccc 0001 0100 xxxx xxxx xxxx 0101 xxxx :Q */
+ /* QDSUB : cccc 0001 0110 xxxx xxxx xxxx 0101 xxxx :Q */
+ return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+ }
+
+ /* cccc 0000 xxxx xxxx xxxx xxxx xxxx 1001 xxxx */
+ else if ((insn & 0x0f000090) == 0x00000090) {
+
+ /* MUL : cccc 0000 0000 xxxx xxxx xxxx 1001 xxxx : */
+ /* MULS : cccc 0000 0001 xxxx xxxx xxxx 1001 xxxx :cc */
+ /* MLA : cccc 0000 0010 xxxx xxxx xxxx 1001 xxxx : */
+ /* MLAS : cccc 0000 0011 xxxx xxxx xxxx 1001 xxxx :cc */
+ /* UMAAL : cccc 0000 0100 xxxx xxxx xxxx 1001 xxxx : */
+ /* UMULL : cccc 0000 1000 xxxx xxxx xxxx 1001 xxxx : */
+ /* UMULLS : cccc 0000 1001 xxxx xxxx xxxx 1001 xxxx :cc */
+ /* UMLAL : cccc 0000 1010 xxxx xxxx xxxx 1001 xxxx : */
+ /* UMLALS : cccc 0000 1011 xxxx xxxx xxxx 1001 xxxx :cc */
+ /* SMULL : cccc 0000 1100 xxxx xxxx xxxx 1001 xxxx : */
+ /* SMULLS : cccc 0000 1101 xxxx xxxx xxxx 1001 xxxx :cc */
+ /* SMLAL : cccc 0000 1110 xxxx xxxx xxxx 1001 xxxx : */
+ /* SMLALS : cccc 0000 1111 xxxx xxxx xxxx 1001 xxxx :cc */
+ if ((insn & 0x0fe000f0) == 0x00000090) {
+ return prep_emulate_rd16rs8rm0_wflags(insn, asi);
+ } else if ((insn & 0x0fe000f0) == 0x00200090) {
+ return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+ } else {
+ return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi);
+ }
+ }
+
+ /* cccc 000x xxxx xxxx xxxx xxxx xxxx 1xx1 xxxx */
+ else if ((insn & 0x0e000090) == 0x00000090) {
+
+ /* SWP : cccc 0001 0000 xxxx xxxx xxxx 1001 xxxx */
+ /* SWPB : cccc 0001 0100 xxxx xxxx xxxx 1001 xxxx */
+ /* LDRD : cccc 000x xxx0 xxxx xxxx xxxx 1101 xxxx */
+ /* STRD : cccc 000x xxx0 xxxx xxxx xxxx 1111 xxxx */
+ /* STREX : cccc 0001 1000 xxxx xxxx xxxx 1001 xxxx */
+ /* LDREX : cccc 0001 1001 xxxx xxxx xxxx 1001 xxxx */
+ /* LDRH : cccc 000x xxx1 xxxx xxxx xxxx 1011 xxxx */
+ /* STRH : cccc 000x xxx0 xxxx xxxx xxxx 1011 xxxx */
+ /* LDRSB : cccc 000x xxx1 xxxx xxxx xxxx 1101 xxxx */
+ /* LDRSH : cccc 000x xxx1 xxxx xxxx xxxx 1111 xxxx */
+ if ((insn & 0x0fb000f0) == 0x01000090) {
+ /* SWP/SWPB */
+ return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+ } else if ((insn & 0x0e1000d0) == 0x00000d0) {
+ /* STRD/LDRD */
+ insn &= 0xfff00fff;
+ insn |= 0x00002000; /* Rn = r0, Rd = r2 */
+ if (insn & (1 << 22)) {
+ /* I bit */
+ insn &= ~0xf;
+ insn |= 1; /* Rm = r1 */
+ }
+ asi->insn[0] = insn;
+ asi->insn_handler =
+ (insn & (1 << 5)) ? emulate_strd : emulate_ldrd;
+ return INSN_GOOD;
+ }
+
+ return prep_emulate_ldr_str(insn, asi);
+ }
+
+ /* cccc 000x xxxx xxxx xxxx xxxx xxxx xxxx xxxx */
+
+ /*
+ * ALU op with S bit and Rd == 15 :
+ * cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx
+ */
+ if ((insn & 0x0e10f000) == 0x0010f000)
+ return INSN_REJECTED;
+
+ /*
+ * "mov ip, sp" is the most common kprobe'd instruction by far.
+ * Check and optimize for it explicitly.
+ */
+ if (insn == 0xe1a0c00d) {
+ asi->insn_handler = simulate_mov_ipsp;
+ return INSN_GOOD_NO_SLOT;
+ }
+
+ /*
+ * Data processing: Immediate-shift / Register-shift
+ * ALU op : cccc 000x xxxx xxxx xxxx xxxx xxxx xxxx
+ * CPY : cccc 0001 1010 xxxx xxxx 0000 0000 xxxx
+ * MOV : cccc 0001 101x xxxx xxxx xxxx xxxx xxxx
+ * *S (bit 20) updates condition codes
+ * ADC/SBC/RSC reads the C flag
+ */
+ insn &= 0xfff00ff0; /* Rn = r0, Rd = r0 */
+ insn |= 0x00000001; /* Rm = r1 */
+ if (insn & 0x010) {
+ insn &= 0xfffff0ff; /* register shift */
+ insn |= 0x00000200; /* Rs = r2 */
+ }
+ asi->insn[0] = insn;
+ asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */
+ emulate_alu_rwflags : emulate_alu_rflags;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /*
+ * MSR : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx
+ * Undef : cccc 0011 0x00 xxxx xxxx xxxx xxxx xxxx
+ * ALU op with S bit and Rd == 15 :
+ * cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx
+ */
+ if ((insn & 0x0f900000) == 0x03200000 || /* MSR & Undef */
+ (insn & 0x0e10f000) == 0x0210f000) /* ALU s-bit, R15 */
+ return INSN_REJECTED;
+
+ /*
+ * Data processing: 32-bit Immediate
+ * ALU op : cccc 001x xxxx xxxx xxxx xxxx xxxx xxxx
+ * MOV : cccc 0011 101x xxxx xxxx xxxx xxxx xxxx
+ * *S (bit 20) updates condition codes
+ * ADC/SBC/RSC reads the C flag
+ */
+ insn &= 0xfff00ff0; /* Rn = r0, Rd = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */
+ emulate_alu_imm_rwflags : emulate_alu_imm_rflags;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* SEL : cccc 0110 1000 xxxx xxxx xxxx 1011 xxxx GE: !!! */
+ if ((insn & 0x0ff000f0) == 0x068000b0) {
+ insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */
+ insn |= 0x00000001; /* Rm = r1 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_sel;
+ return INSN_GOOD;
+ }
+
+ /* SSAT : cccc 0110 101x xxxx xxxx xxxx xx01 xxxx :Q */
+ /* USAT : cccc 0110 111x xxxx xxxx xxxx xx01 xxxx :Q */
+ /* SSAT16 : cccc 0110 1010 xxxx xxxx xxxx 0011 xxxx :Q */
+ /* USAT16 : cccc 0110 1110 xxxx xxxx xxxx 0011 xxxx :Q */
+ if ((insn & 0x0fa00030) == 0x06a00010 ||
+ (insn & 0x0fb000f0) == 0x06a00030) {
+ insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_sat;
+ return INSN_GOOD;
+ }
+
+ /* REV : cccc 0110 1011 xxxx xxxx xxxx 0011 xxxx */
+ /* REV16 : cccc 0110 1011 xxxx xxxx xxxx 1011 xxxx */
+ /* REVSH : cccc 0110 1111 xxxx xxxx xxxx 1011 xxxx */
+ if ((insn & 0x0ff00070) == 0x06b00030 ||
+ (insn & 0x0ff000f0) == 0x06f000b0)
+ return prep_emulate_rd12rm0(insn, asi);
+
+ /* SADD16 : cccc 0110 0001 xxxx xxxx xxxx 0001 xxxx :GE */
+ /* SADDSUBX : cccc 0110 0001 xxxx xxxx xxxx 0011 xxxx :GE */
+ /* SSUBADDX : cccc 0110 0001 xxxx xxxx xxxx 0101 xxxx :GE */
+ /* SSUB16 : cccc 0110 0001 xxxx xxxx xxxx 0111 xxxx :GE */
+ /* SADD8 : cccc 0110 0001 xxxx xxxx xxxx 1001 xxxx :GE */
+ /* SSUB8 : cccc 0110 0001 xxxx xxxx xxxx 1111 xxxx :GE */
+ /* QADD16 : cccc 0110 0010 xxxx xxxx xxxx 0001 xxxx : */
+ /* QADDSUBX : cccc 0110 0010 xxxx xxxx xxxx 0011 xxxx : */
+ /* QSUBADDX : cccc 0110 0010 xxxx xxxx xxxx 0101 xxxx : */
+ /* QSUB16 : cccc 0110 0010 xxxx xxxx xxxx 0111 xxxx : */
+ /* QADD8 : cccc 0110 0010 xxxx xxxx xxxx 1001 xxxx : */
+ /* QSUB8 : cccc 0110 0010 xxxx xxxx xxxx 1111 xxxx : */
+ /* SHADD16 : cccc 0110 0011 xxxx xxxx xxxx 0001 xxxx : */
+ /* SHADDSUBX : cccc 0110 0011 xxxx xxxx xxxx 0011 xxxx : */
+ /* SHSUBADDX : cccc 0110 0011 xxxx xxxx xxxx 0101 xxxx : */
+ /* SHSUB16 : cccc 0110 0011 xxxx xxxx xxxx 0111 xxxx : */
+ /* SHADD8 : cccc 0110 0011 xxxx xxxx xxxx 1001 xxxx : */
+ /* SHSUB8 : cccc 0110 0011 xxxx xxxx xxxx 1111 xxxx : */
+ /* UADD16 : cccc 0110 0101 xxxx xxxx xxxx 0001 xxxx :GE */
+ /* UADDSUBX : cccc 0110 0101 xxxx xxxx xxxx 0011 xxxx :GE */
+ /* USUBADDX : cccc 0110 0101 xxxx xxxx xxxx 0101 xxxx :GE */
+ /* USUB16 : cccc 0110 0101 xxxx xxxx xxxx 0111 xxxx :GE */
+ /* UADD8 : cccc 0110 0101 xxxx xxxx xxxx 1001 xxxx :GE */
+ /* USUB8 : cccc 0110 0101 xxxx xxxx xxxx 1111 xxxx :GE */
+ /* UQADD16 : cccc 0110 0110 xxxx xxxx xxxx 0001 xxxx : */
+ /* UQADDSUBX : cccc 0110 0110 xxxx xxxx xxxx 0011 xxxx : */
+ /* UQSUBADDX : cccc 0110 0110 xxxx xxxx xxxx 0101 xxxx : */
+ /* UQSUB16 : cccc 0110 0110 xxxx xxxx xxxx 0111 xxxx : */
+ /* UQADD8 : cccc 0110 0110 xxxx xxxx xxxx 1001 xxxx : */
+ /* UQSUB8 : cccc 0110 0110 xxxx xxxx xxxx 1111 xxxx : */
+ /* UHADD16 : cccc 0110 0111 xxxx xxxx xxxx 0001 xxxx : */
+ /* UHADDSUBX : cccc 0110 0111 xxxx xxxx xxxx 0011 xxxx : */
+ /* UHSUBADDX : cccc 0110 0111 xxxx xxxx xxxx 0101 xxxx : */
+ /* UHSUB16 : cccc 0110 0111 xxxx xxxx xxxx 0111 xxxx : */
+ /* UHADD8 : cccc 0110 0111 xxxx xxxx xxxx 1001 xxxx : */
+ /* UHSUB8 : cccc 0110 0111 xxxx xxxx xxxx 1111 xxxx : */
+ /* PKHBT : cccc 0110 1000 xxxx xxxx xxxx x001 xxxx : */
+ /* PKHTB : cccc 0110 1000 xxxx xxxx xxxx x101 xxxx : */
+ /* SXTAB16 : cccc 0110 1000 xxxx xxxx xxxx 0111 xxxx : */
+ /* SXTB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */
+ /* SXTAB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */
+ /* SXTAH : cccc 0110 1011 xxxx xxxx xxxx 0111 xxxx : */
+ /* UXTAB16 : cccc 0110 1100 xxxx xxxx xxxx 0111 xxxx : */
+ /* UXTAB : cccc 0110 1110 xxxx xxxx xxxx 0111 xxxx : */
+ /* UXTAH : cccc 0110 1111 xxxx xxxx xxxx 0111 xxxx : */
+ return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_0111__1(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* Undef : cccc 0111 1111 xxxx xxxx xxxx 1111 xxxx */
+ if ((insn & 0x0ff000f0) == 0x03f000f0)
+ return INSN_REJECTED;
+
+ /* USADA8 : cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx */
+ /* USAD8 : cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx */
+ if ((insn & 0x0ff000f0) == 0x07800010)
+ return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+
+ /* SMLALD : cccc 0111 0100 xxxx xxxx xxxx 00x1 xxxx */
+ /* SMLSLD : cccc 0111 0100 xxxx xxxx xxxx 01x1 xxxx */
+ if ((insn & 0x0ff00090) == 0x07400010)
+ return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi);
+
+ /* SMLAD : cccc 0111 0000 xxxx xxxx xxxx 00x1 xxxx :Q */
+ /* SMLSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx :Q */
+ /* SMMLA : cccc 0111 0101 xxxx xxxx xxxx 00x1 xxxx : */
+ /* SMMLS : cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx : */
+ if ((insn & 0x0ff00090) == 0x07000010 ||
+ (insn & 0x0ff000d0) == 0x07500010 ||
+ (insn & 0x0ff000d0) == 0x075000d0)
+ return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+
+ /* SMUSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx : */
+ /* SMUAD : cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx :Q */
+ /* SMMUL : cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx : */
+ return prep_emulate_rd16rs8rm0_wflags(insn, asi);
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_01xx(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* LDR : cccc 01xx x0x1 xxxx xxxx xxxx xxxx xxxx */
+ /* LDRB : cccc 01xx x1x1 xxxx xxxx xxxx xxxx xxxx */
+ /* LDRBT : cccc 01x0 x111 xxxx xxxx xxxx xxxx xxxx */
+ /* LDRT : cccc 01x0 x011 xxxx xxxx xxxx xxxx xxxx */
+ /* STR : cccc 01xx x0x0 xxxx xxxx xxxx xxxx xxxx */
+ /* STRB : cccc 01xx x1x0 xxxx xxxx xxxx xxxx xxxx */
+ /* STRBT : cccc 01x0 x110 xxxx xxxx xxxx xxxx xxxx */
+ /* STRT : cccc 01x0 x010 xxxx xxxx xxxx xxxx xxxx */
+ return prep_emulate_ldr_str(insn, asi);
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_100x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* LDM(2) : cccc 100x x101 xxxx 0xxx xxxx xxxx xxxx */
+ /* LDM(3) : cccc 100x x1x1 xxxx 1xxx xxxx xxxx xxxx */
+ if ((insn & 0x0e708000) == 0x85000000 ||
+ (insn & 0x0e508000) == 0x85010000)
+ return INSN_REJECTED;
+
+ /* LDM(1) : cccc 100x x0x1 xxxx xxxx xxxx xxxx xxxx */
+ /* STM(1) : cccc 100x x0x0 xxxx xxxx xxxx xxxx xxxx */
+ asi->insn[0] = truecc_insn(insn);
+ asi->insn_handler = ((insn & 0x108000) == 0x008000) ? /* STM & R15 */
+ simulate_stm1_pc : simulate_ldm1stm1;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_101x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* B : cccc 1010 xxxx xxxx xxxx xxxx xxxx xxxx */
+ /* BL : cccc 1011 xxxx xxxx xxxx xxxx xxxx xxxx */
+ asi->insn[0] = truecc_insn(insn);
+ asi->insn_handler = simulate_bbl;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_1100_010x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* MCRR : cccc 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */
+ /* MRRC : cccc 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */
+ insn &= 0xfff00fff;
+ insn |= 0x00001000; /* Rn = r0, Rd = r1 */
+ asi->insn[0] = insn;
+ asi->insn_handler = (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_110x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* LDC : cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
+ /* STC : cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
+ insn &= 0xfff0ffff; /* Rn = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_ldcstc;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_111x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */
+ /* SWI : cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */
+ if ((insn & 0xfff000f0) == 0xe1200070 ||
+ (insn & 0x0f000000) == 0x0f000000)
+ return INSN_REJECTED;
+
+ /* CDP : cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
+ if ((insn & 0x0f000010) == 0x0e000000) {
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_none;
+ return INSN_GOOD;
+ }
+
+ /* MCR : cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
+ /* MRC : cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
+ insn &= 0xffff0fff; /* Rd = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12;
+ return INSN_GOOD;
+}
+
+/* Return:
+ * INSN_REJECTED If instruction is one not allowed to kprobe,
+ * INSN_GOOD If instruction is supported and uses instruction slot,
+ * INSN_GOOD_NO_SLOT If instruction is supported but doesn't use its slot.
+ *
+ * For instructions we don't want to kprobe (INSN_REJECTED return result):
+ * These are generally ones that modify the processor state making
+ * them "hard" to simulate such as switches processor modes or
+ * make accesses in alternate modes. Any of these could be simulated
+ * if the work was put into it, but low return considering they
+ * should also be very rare.
+ */
+enum kprobe_insn __kprobes
+arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ asi->insn[1] = KPROBE_RETURN_INSTRUCTION;
+
+ if ((insn & 0xf0000000) == 0xf0000000) {
+
+ return space_1111(insn, asi);
+
+ } else if ((insn & 0x0e000000) == 0x00000000) {
+
+ return space_cccc_000x(insn, asi);
+
+ } else if ((insn & 0x0e000000) == 0x02000000) {
+
+ return space_cccc_001x(insn, asi);
+
+ } else if ((insn & 0x0f000010) == 0x06000010) {
+
+ return space_cccc_0110__1(insn, asi);
+
+ } else if ((insn & 0x0f000010) == 0x07000010) {
+
+ return space_cccc_0111__1(insn, asi);
+
+ } else if ((insn & 0x0c000000) == 0x04000000) {
+
+ return space_cccc_01xx(insn, asi);
+
+ } else if ((insn & 0x0e000000) == 0x08000000) {
+
+ return space_cccc_100x(insn, asi);
+
+ } else if ((insn & 0x0e000000) == 0x0a000000) {
+
+ return space_cccc_101x(insn, asi);
+
+ } else if ((insn & 0x0fe00000) == 0x0c400000) {
+
+ return space_cccc_1100_010x(insn, asi);
+
+ } else if ((insn & 0x0e000000) == 0x0c400000) {
+
+ return space_cccc_110x(insn, asi);
+
+ }
+
+ return space_cccc_111x(insn, asi);
+}
+
+void __init arm_kprobe_decode_init(void)
+{
+ find_str_pc_offset();
+}
+
+
+/*
+ * All ARM instructions listed below.
+ *
+ * Instructions and their general purpose registers are given.
+ * If a particular register may not use R15, it is prefixed with a "!".
+ * If marked with a "*" means the value returned by reading R15
+ * is implementation defined.
+ *
+ * ADC/ADD/AND/BIC/CMN/CMP/EOR/MOV/MVN/ORR/RSB/RSC/SBC/SUB/TEQ
+ * TST: Rd, Rn, Rm, !Rs
+ * BX: Rm
+ * BLX(2): !Rm
+ * BX: Rm (R15 legal, but discouraged)
+ * BXJ: !Rm,
+ * CLZ: !Rd, !Rm
+ * CPY: Rd, Rm
+ * LDC/2,STC/2 immediate offset & unindex: Rn
+ * LDC/2,STC/2 immediate pre/post-indexed: !Rn
+ * LDM(1/3): !Rn, register_list
+ * LDM(2): !Rn, !register_list
+ * LDR,STR,PLD immediate offset: Rd, Rn
+ * LDR,STR,PLD register offset: Rd, Rn, !Rm
+ * LDR,STR,PLD scaled register offset: Rd, !Rn, !Rm
+ * LDR,STR immediate pre/post-indexed: Rd, !Rn
+ * LDR,STR register pre/post-indexed: Rd, !Rn, !Rm
+ * LDR,STR scaled register pre/post-indexed: Rd, !Rn, !Rm
+ * LDRB,STRB immediate offset: !Rd, Rn
+ * LDRB,STRB register offset: !Rd, Rn, !Rm
+ * LDRB,STRB scaled register offset: !Rd, !Rn, !Rm
+ * LDRB,STRB immediate pre/post-indexed: !Rd, !Rn
+ * LDRB,STRB register pre/post-indexed: !Rd, !Rn, !Rm
+ * LDRB,STRB scaled register pre/post-indexed: !Rd, !Rn, !Rm
+ * LDRT,LDRBT,STRBT immediate pre/post-indexed: !Rd, !Rn
+ * LDRT,LDRBT,STRBT register pre/post-indexed: !Rd, !Rn, !Rm
+ * LDRT,LDRBT,STRBT scaled register pre/post-indexed: !Rd, !Rn, !Rm
+ * LDRH/SH/SB/D,STRH/SH/SB/D immediate offset: !Rd, Rn
+ * LDRH/SH/SB/D,STRH/SH/SB/D register offset: !Rd, Rn, !Rm
+ * LDRH/SH/SB/D,STRH/SH/SB/D immediate pre/post-indexed: !Rd, !Rn
+ * LDRH/SH/SB/D,STRH/SH/SB/D register pre/post-indexed: !Rd, !Rn, !Rm
+ * LDREX: !Rd, !Rn
+ * MCR/2: !Rd
+ * MCRR/2,MRRC/2: !Rd, !Rn
+ * MLA: !Rd, !Rn, !Rm, !Rs
+ * MOV: Rd
+ * MRC/2: !Rd (if Rd==15, only changes cond codes, not the register)
+ * MRS,MSR: !Rd
+ * MUL: !Rd, !Rm, !Rs
+ * PKH{BT,TB}: !Rd, !Rn, !Rm
+ * QDADD,[U]QADD/16/8/SUBX: !Rd, !Rm, !Rn
+ * QDSUB,[U]QSUB/16/8/ADDX: !Rd, !Rm, !Rn
+ * REV/16/SH: !Rd, !Rm
+ * RFE: !Rn
+ * {S,U}[H]ADD{16,8,SUBX},{S,U}[H]SUB{16,8,ADDX}: !Rd, !Rn, !Rm
+ * SEL: !Rd, !Rn, !Rm
+ * SMLA<x><y>,SMLA{D,W<y>},SMLSD,SMML{A,S}: !Rd, !Rn, !Rm, !Rs
+ * SMLAL<x><y>,SMLA{D,LD},SMLSLD,SMMULL,SMULW<y>: !RdHi, !RdLo, !Rm, !Rs
+ * SMMUL,SMUAD,SMUL<x><y>,SMUSD: !Rd, !Rm, !Rs
+ * SSAT/16: !Rd, !Rm
+ * STM(1/2): !Rn, register_list* (R15 in reg list not recommended)
+ * STRT immediate pre/post-indexed: Rd*, !Rn
+ * STRT register pre/post-indexed: Rd*, !Rn, !Rm
+ * STRT scaled register pre/post-indexed: Rd*, !Rn, !Rm
+ * STREX: !Rd, !Rn, !Rm
+ * SWP/B: !Rd, !Rn, !Rm
+ * {S,U}XTA{B,B16,H}: !Rd, !Rn, !Rm
+ * {S,U}XT{B,B16,H}: !Rd, !Rm
+ * UM{AA,LA,UL}L: !RdHi, !RdLo, !Rm, !Rs
+ * USA{D8,A8,T,T16}: !Rd, !Rm, !Rs
+ *
+ * May transfer control by writing R15 (possible mode changes or alternate
+ * mode accesses marked by "*"):
+ * ALU op (* with s-bit), B, BL, BKPT, BLX(1/2), BX, BXJ, CPS*, CPY,
+ * LDM(1), LDM(2/3)*, LDR, MOV, RFE*, SWI*
+ *
+ * Instructions that do not take general registers, nor transfer control:
+ * CDP/2, SETEND, SRS*
+ */
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
new file mode 100644
index 000000000000..a22a98c43ca5
--- /dev/null
+++ b/arch/arm/kernel/kprobes.c
@@ -0,0 +1,447 @@
+/*
+ * arch/arm/kernel/kprobes.c
+ *
+ * Kprobes on ARM
+ *
+ * Abhishek Sagar <sagar.abhishek@gmail.com>
+ * Copyright (C) 2006, 2007 Motorola Inc.
+ *
+ * Nicolas Pitre <nico@marvell.com>
+ * Copyright (C) 2007 Marvell Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+#include <linux/module.h>
+#include <linux/stringify.h>
+#include <asm/traps.h>
+#include <asm/cacheflush.h>
+
+#define MIN_STACK_SIZE(addr) \
+ min((unsigned long)MAX_STACK_SIZE, \
+ (unsigned long)current_thread_info() + THREAD_START_SP - (addr))
+
+#define flush_insns(addr, cnt) \
+ flush_icache_range((unsigned long)(addr), \
+ (unsigned long)(addr) + \
+ sizeof(kprobe_opcode_t) * (cnt))
+
+/* Used as a marker in ARM_pc to note when we're in a jprobe. */
+#define JPROBE_MAGIC_ADDR 0xffffffff
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+ kprobe_opcode_t insn;
+ kprobe_opcode_t tmp_insn[MAX_INSN_SIZE];
+ unsigned long addr = (unsigned long)p->addr;
+ int is;
+
+ if (addr & 0x3 || in_exception_text(addr))
+ return -EINVAL;
+
+ insn = *p->addr;
+ p->opcode = insn;
+ p->ainsn.insn = tmp_insn;
+
+ switch (arm_kprobe_decode_insn(insn, &p->ainsn)) {
+ case INSN_REJECTED: /* not supported */
+ return -EINVAL;
+
+ case INSN_GOOD: /* instruction uses slot */
+ p->ainsn.insn = get_insn_slot();
+ if (!p->ainsn.insn)
+ return -ENOMEM;
+ for (is = 0; is < MAX_INSN_SIZE; ++is)
+ p->ainsn.insn[is] = tmp_insn[is];
+ flush_insns(&p->ainsn.insn, MAX_INSN_SIZE);
+ break;
+
+ case INSN_GOOD_NO_SLOT: /* instruction doesn't need insn slot */
+ p->ainsn.insn = NULL;
+ break;
+ }
+
+ return 0;
+}
+
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+ *p->addr = KPROBE_BREAKPOINT_INSTRUCTION;
+ flush_insns(p->addr, 1);
+}
+
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
+{
+ *p->addr = p->opcode;
+ flush_insns(p->addr, 1);
+}
+
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+ if (p->ainsn.insn) {
+ mutex_lock(&kprobe_mutex);
+ free_insn_slot(p->ainsn.insn, 0);
+ mutex_unlock(&kprobe_mutex);
+ p->ainsn.insn = NULL;
+ }
+}
+
+static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+ kcb->prev_kprobe.kp = kprobe_running();
+ kcb->prev_kprobe.status = kcb->kprobe_status;
+}
+
+static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+ __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+ kcb->kprobe_status = kcb->prev_kprobe.status;
+}
+
+static void __kprobes set_current_kprobe(struct kprobe *p)
+{
+ __get_cpu_var(current_kprobe) = p;
+}
+
+static void __kprobes singlestep(struct kprobe *p, struct pt_regs *regs,
+ struct kprobe_ctlblk *kcb)
+{
+ regs->ARM_pc += 4;
+ p->ainsn.insn_handler(p, regs);
+}
+
+/*
+ * Called with IRQs disabled. IRQs must remain disabled from that point
+ * all the way until processing this kprobe is complete. The current
+ * kprobes implementation cannot process more than one nested level of
+ * kprobe, and that level is reserved for user kprobe handlers, so we can't
+ * risk encountering a new kprobe in an interrupt handler.
+ */
+void __kprobes kprobe_handler(struct pt_regs *regs)
+{
+ struct kprobe *p, *cur;
+ struct kprobe_ctlblk *kcb;
+ kprobe_opcode_t *addr = (kprobe_opcode_t *)regs->ARM_pc;
+
+ kcb = get_kprobe_ctlblk();
+ cur = kprobe_running();
+ p = get_kprobe(addr);
+
+ if (p) {
+ if (cur) {
+ /* Kprobe is pending, so we're recursing. */
+ switch (kcb->kprobe_status) {
+ case KPROBE_HIT_ACTIVE:
+ case KPROBE_HIT_SSDONE:
+ /* A pre- or post-handler probe got us here. */
+ kprobes_inc_nmissed_count(p);
+ save_previous_kprobe(kcb);
+ set_current_kprobe(p);
+ kcb->kprobe_status = KPROBE_REENTER;
+ singlestep(p, regs, kcb);
+ restore_previous_kprobe(kcb);
+ break;
+ default:
+ /* impossible cases */
+ BUG();
+ }
+ } else {
+ set_current_kprobe(p);
+ kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+
+ /*
+ * If we have no pre-handler or it returned 0, we
+ * continue with normal processing. If we have a
+ * pre-handler and it returned non-zero, it prepped
+ * for calling the break_handler below on re-entry,
+ * so get out doing nothing more here.
+ */
+ if (!p->pre_handler || !p->pre_handler(p, regs)) {
+ kcb->kprobe_status = KPROBE_HIT_SS;
+ singlestep(p, regs, kcb);
+ if (p->post_handler) {
+ kcb->kprobe_status = KPROBE_HIT_SSDONE;
+ p->post_handler(p, regs, 0);
+ }
+ reset_current_kprobe();
+ }
+ }
+ } else if (cur) {
+ /* We probably hit a jprobe. Call its break handler. */
+ if (cur->break_handler && cur->break_handler(cur, regs)) {
+ kcb->kprobe_status = KPROBE_HIT_SS;
+ singlestep(cur, regs, kcb);
+ if (cur->post_handler) {
+ kcb->kprobe_status = KPROBE_HIT_SSDONE;
+ cur->post_handler(cur, regs, 0);
+ }
+ }
+ reset_current_kprobe();
+ } else {
+ /*
+ * The probe was removed and a race is in progress.
+ * There is nothing we can do about it. Let's restart
+ * the instruction. By the time we can restart, the
+ * real instruction will be there.
+ */
+ }
+}
+
+int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr)
+{
+ kprobe_handler(regs);
+ return 0;
+}
+
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr)
+{
+ struct kprobe *cur = kprobe_running();
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+ switch (kcb->kprobe_status) {
+ case KPROBE_HIT_SS:
+ case KPROBE_REENTER:
+ /*
+ * We are here because the instruction being single
+ * stepped caused a page fault. We reset the current
+ * kprobe and the PC to point back to the probe address
+ * and allow the page fault handler to continue as a
+ * normal page fault.
+ */
+ regs->ARM_pc = (long)cur->addr;
+ if (kcb->kprobe_status == KPROBE_REENTER) {
+ restore_previous_kprobe(kcb);
+ } else {
+ reset_current_kprobe();
+ }
+ break;
+
+ case KPROBE_HIT_ACTIVE:
+ case KPROBE_HIT_SSDONE:
+ /*
+ * We increment the nmissed count for accounting,
+ * we can also use npre/npostfault count for accounting
+ * these specific fault cases.
+ */
+ kprobes_inc_nmissed_count(cur);
+
+ /*
+ * We come here because instructions in the pre/post
+ * handler caused the page_fault, this could happen
+ * if handler tries to access user space by
+ * copy_from_user(), get_user() etc. Let the
+ * user-specified handler try to fix it.
+ */
+ if (cur->fault_handler && cur->fault_handler(cur, regs, fsr))
+ return 1;
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
+ unsigned long val, void *data)
+{
+ /*
+ * notify_die() is currently never called on ARM,
+ * so this callback is currently empty.
+ */
+ return NOTIFY_DONE;
+}
+
+/*
+ * When a retprobed function returns, trampoline_handler() is called,
+ * calling the kretprobe's handler. We construct a struct pt_regs to
+ * give a view of registers r0-r11 to the user return-handler. This is
+ * not a complete pt_regs structure, but that should be plenty sufficient
+ * for kretprobe handlers which should normally be interested in r0 only
+ * anyway.
+ */
+static void __attribute__((naked)) __kprobes kretprobe_trampoline(void)
+{
+ __asm__ __volatile__ (
+ "stmdb sp!, {r0 - r11} \n\t"
+ "mov r0, sp \n\t"
+ "bl trampoline_handler \n\t"
+ "mov lr, r0 \n\t"
+ "ldmia sp!, {r0 - r11} \n\t"
+ "mov pc, lr \n\t"
+ : : : "memory");
+}
+
+/* Called from kretprobe_trampoline */
+static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
+{
+ struct kretprobe_instance *ri = NULL;
+ struct hlist_head *head, empty_rp;
+ struct hlist_node *node, *tmp;
+ unsigned long flags, orig_ret_address = 0;
+ unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
+
+ INIT_HLIST_HEAD(&empty_rp);
+ spin_lock_irqsave(&kretprobe_lock, flags);
+ head = kretprobe_inst_table_head(current);
+
+ /*
+ * It is possible to have multiple instances associated with a given
+ * task either because multiple functions in the call path have
+ * a return probe installed on them, and/or more than one return
+ * probe was registered for a target function.
+ *
+ * We can handle this because:
+ * - instances are always inserted at the head of the list
+ * - when multiple return probes are registered for the same
+ * function, the first instance's ret_addr will point to the
+ * real return address, and all the rest will point to
+ * kretprobe_trampoline
+ */
+ hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
+ if (ri->task != current)
+ /* another task is sharing our hash bucket */
+ continue;
+
+ if (ri->rp && ri->rp->handler) {
+ __get_cpu_var(current_kprobe) = &ri->rp->kp;
+ get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
+ ri->rp->handler(ri, regs);
+ __get_cpu_var(current_kprobe) = NULL;
+ }
+
+ orig_ret_address = (unsigned long)ri->ret_addr;
+ recycle_rp_inst(ri, &empty_rp);
+
+ if (orig_ret_address != trampoline_address)
+ /*
+ * This is the real return address. Any other
+ * instances associated with this task are for
+ * other calls deeper on the call stack
+ */
+ break;
+ }
+
+ kretprobe_assert(ri, orig_ret_address, trampoline_address);
+ spin_unlock_irqrestore(&kretprobe_lock, flags);
+
+ hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
+ hlist_del(&ri->hlist);
+ kfree(ri);
+ }
+
+ return (void *)orig_ret_address;
+}
+
+/* Called with kretprobe_lock held. */
+void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
+ struct pt_regs *regs)
+{
+ ri->ret_addr = (kprobe_opcode_t *)regs->ARM_lr;
+
+ /* Replace the return addr with trampoline addr. */
+ regs->ARM_lr = (unsigned long)&kretprobe_trampoline;
+}
+
+int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ struct jprobe *jp = container_of(p, struct jprobe, kp);
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+ long sp_addr = regs->ARM_sp;
+
+ kcb->jprobe_saved_regs = *regs;
+ memcpy(kcb->jprobes_stack, (void *)sp_addr, MIN_STACK_SIZE(sp_addr));
+ regs->ARM_pc = (long)jp->entry;
+ regs->ARM_cpsr |= PSR_I_BIT;
+ preempt_disable();
+ return 1;
+}
+
+void __kprobes jprobe_return(void)
+{
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+ __asm__ __volatile__ (
+ /*
+ * Setup an empty pt_regs. Fill SP and PC fields as
+ * they're needed by longjmp_break_handler.
+ */
+ "sub sp, %0, %1 \n\t"
+ "ldr r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t"
+ "str %0, [sp, %2] \n\t"
+ "str r0, [sp, %3] \n\t"
+ "mov r0, sp \n\t"
+ "bl kprobe_handler \n\t"
+
+ /*
+ * Return to the context saved by setjmp_pre_handler
+ * and restored by longjmp_break_handler.
+ */
+ "ldr r0, [sp, %4] \n\t"
+ "msr cpsr_cxsf, r0 \n\t"
+ "ldmia sp, {r0 - pc} \n\t"
+ :
+ : "r" (kcb->jprobe_saved_regs.ARM_sp),
+ "I" (sizeof(struct pt_regs)),
+ "J" (offsetof(struct pt_regs, ARM_sp)),
+ "J" (offsetof(struct pt_regs, ARM_pc)),
+ "J" (offsetof(struct pt_regs, ARM_cpsr))
+ : "memory", "cc");
+}
+
+int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+ long stack_addr = kcb->jprobe_saved_regs.ARM_sp;
+ long orig_sp = regs->ARM_sp;
+ struct jprobe *jp = container_of(p, struct jprobe, kp);
+
+ if (regs->ARM_pc == JPROBE_MAGIC_ADDR) {
+ if (orig_sp != stack_addr) {
+ struct pt_regs *saved_regs =
+ (struct pt_regs *)kcb->jprobe_saved_regs.ARM_sp;
+ printk("current sp %lx does not match saved sp %lx\n",
+ orig_sp, stack_addr);
+ printk("Saved registers for jprobe %p\n", jp);
+ show_regs(saved_regs);
+ printk("Current registers\n");
+ show_regs(regs);
+ BUG();
+ }
+ *regs = kcb->jprobe_saved_regs;
+ memcpy((void *)stack_addr, kcb->jprobes_stack,
+ MIN_STACK_SIZE(stack_addr));
+ preempt_enable_no_resched();
+ return 1;
+ }
+ return 0;
+}
+
+static struct undef_hook kprobes_break_hook = {
+ .instr_mask = 0xffffffff,
+ .instr_val = KPROBE_BREAKPOINT_INSTRUCTION,
+ .cpsr_mask = MODE_MASK,
+ .cpsr_val = SVC_MODE,
+ .fn = kprobe_trap_handler,
+};
+
+int __init arch_init_kprobes()
+{
+ arm_kprobe_decode_init();
+ register_undef_hook(&kprobes_break_hook);
+ return 0;
+}
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index 863c66454f2b..db8f54a3451f 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -21,6 +21,7 @@ extern void setup_mm_for_reboot(char mode);
extern unsigned long kexec_start_address;
extern unsigned long kexec_indirection_page;
extern unsigned long kexec_mach_type;
+extern unsigned long kexec_boot_atags;
/*
* Provide a dummy crash_notes definition while crash dump arrives to arm.
@@ -62,6 +63,7 @@ void machine_kexec(struct kimage *image)
kexec_start_address = image->start;
kexec_indirection_page = page_list;
kexec_mach_type = machine_arch_type;
+ kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
/* copy our kernel relocation code to the control code page */
memcpy(reboot_code_buffer,
diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S
index 062c111c572f..61930eb09029 100644
--- a/arch/arm/kernel/relocate_kernel.S
+++ b/arch/arm/kernel/relocate_kernel.S
@@ -7,23 +7,6 @@
.globl relocate_new_kernel
relocate_new_kernel:
- /* Move boot params back to where the kernel expects them */
-
- ldr r0,kexec_boot_params_address
- teq r0,#0
- beq 8f
-
- ldr r1,kexec_boot_params_copy
- mov r6,#KEXEC_BOOT_PARAMS_SIZE/4
-7:
- ldr r5,[r1],#4
- str r5,[r0],#4
- subs r6,r6,#1
- bne 7b
-
-8:
- /* Boot params moved, now go on with the kernel */
-
ldr r0,kexec_indirection_page
ldr r1,kexec_start_address
@@ -67,7 +50,7 @@ relocate_new_kernel:
mov lr,r1
mov r0,#0
ldr r1,kexec_mach_type
- ldr r2,kexec_boot_params_address
+ ldr r2,kexec_boot_atags
mov pc,lr
.globl kexec_start_address
@@ -82,14 +65,9 @@ kexec_indirection_page:
kexec_mach_type:
.long 0x0
- /* phy addr where new kernel will expect to find boot params */
- .globl kexec_boot_params_address
-kexec_boot_params_address:
- .long 0x0
-
- /* phy addr where old kernel put a copy of orig boot params */
- .globl kexec_boot_params_copy
-kexec_boot_params_copy:
+ /* phy addr of the atags for the new kernel */
+ .globl kexec_boot_atags
+kexec_boot_atags:
.long 0x0
relocate_new_kernel_end:
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index bf56eb337df1..d3941a7b0455 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -24,7 +24,6 @@
#include <linux/interrupt.h>
#include <linux/smp.h>
#include <linux/fs.h>
-#include <linux/kexec.h>
#include <asm/cpu.h>
#include <asm/elf.h>
@@ -39,6 +38,7 @@
#include <asm/mach/time.h>
#include "compat.h"
+#include "atags.h"
#ifndef MEM_SIZE
#define MEM_SIZE (16*1024*1024)
@@ -62,6 +62,7 @@ extern int root_mountflags;
extern void _stext, _text, _etext, __data_start, _edata, _end;
unsigned int processor_id;
+EXPORT_SYMBOL(processor_id);
unsigned int __machine_arch_type;
EXPORT_SYMBOL(__machine_arch_type);
@@ -784,23 +785,6 @@ static int __init customize_machine(void)
}
arch_initcall(customize_machine);
-#ifdef CONFIG_KEXEC
-
-/* Physical addr of where the boot params should be for this machine */
-extern unsigned long kexec_boot_params_address;
-
-/* Physical addr of the buffer into which the boot params are copied */
-extern unsigned long kexec_boot_params_copy;
-
-/* Pointer to the boot params buffer, for manipulation and display */
-unsigned long kexec_boot_params;
-EXPORT_SYMBOL(kexec_boot_params);
-
-/* The buffer itself - make sure it is sized correctly */
-static unsigned long kexec_boot_params_buf[(KEXEC_BOOT_PARAMS_SIZE + 3) / 4];
-
-#endif
-
void __init setup_arch(char **cmdline_p)
{
struct tag *tags = (struct tag *)&init_tags;
@@ -819,18 +803,6 @@ void __init setup_arch(char **cmdline_p)
else if (mdesc->boot_params)
tags = phys_to_virt(mdesc->boot_params);
-#ifdef CONFIG_KEXEC
- kexec_boot_params_copy = virt_to_phys(kexec_boot_params_buf);
- kexec_boot_params = (unsigned long)kexec_boot_params_buf;
- if (__atags_pointer) {
- kexec_boot_params_address = __atags_pointer;
- memcpy((void *)kexec_boot_params, tags, KEXEC_BOOT_PARAMS_SIZE);
- } else if (mdesc->boot_params) {
- kexec_boot_params_address = mdesc->boot_params;
- memcpy((void *)kexec_boot_params, tags, KEXEC_BOOT_PARAMS_SIZE);
- }
-#endif
-
/*
* If we have the old style parameters, convert them to
* a tag list.
@@ -846,6 +818,7 @@ void __init setup_arch(char **cmdline_p)
if (tags->hdr.tag == ATAG_CORE) {
if (meminfo.nr_banks != 0)
squash_mem_tags(tags);
+ save_atags(tags);
parse_tags(tags);
}
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index eafbb2b05eb8..eefae1de334c 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -150,7 +150,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
secondary_data.pgdir = 0;
*pmd_offset(pgd, PHYS_OFFSET) = __pmd(0);
- pgd_free(pgd);
+ pgd_free(&init_mm, pgd);
if (ret) {
printk(KERN_CRIT "CPU%u: processor failed to boot\n", cpu);
@@ -290,6 +290,11 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
local_irq_enable();
local_fiq_enable();
+ /*
+ * Setup local timer for this CPU.
+ */
+ local_timer_setup(cpu);
+
calibrate_delay();
smp_store_cpu_info(cpu);
@@ -300,11 +305,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
cpu_set(cpu, cpu_online_map);
/*
- * Setup local timer for this CPU.
- */
- local_timer_setup(cpu);
-
- /*
* OK, it's off to the idle thread for us
*/
cpu_idle();
@@ -454,6 +454,27 @@ int smp_call_function(void (*func)(void *info), void *info, int retry,
}
EXPORT_SYMBOL_GPL(smp_call_function);
+int smp_call_function_single(int cpu, void (*func)(void *info), void *info,
+ int retry, int wait)
+{
+ /* prevent preemption and reschedule on another processor */
+ int current_cpu = get_cpu();
+ int ret = 0;
+
+ if (cpu == current_cpu) {
+ local_irq_disable();
+ func(info);
+ local_irq_enable();
+ } else
+ ret = smp_call_function_on_cpu(func, info, retry, wait,
+ cpumask_of_cpu(cpu));
+
+ put_cpu();
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(smp_call_function_single);
+
void show_ipi_list(struct seq_file *p)
{
unsigned int cpu;
@@ -481,8 +502,7 @@ void show_local_irqs(struct seq_file *p)
static void ipi_timer(void)
{
irq_enter();
- profile_tick(CPU_PROFILING);
- update_process_times(user_mode(get_irq_regs()));
+ local_timer_interrupt();
irq_exit();
}
@@ -621,6 +641,11 @@ void smp_send_timer(void)
send_ipi_message(mask, IPI_TIMER);
}
+void smp_timer_broadcast(cpumask_t mask)
+{
+ send_ipi_message(mask, IPI_TIMER);
+}
+
void smp_send_stop(void)
{
cpumask_t mask = cpu_online_map;
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 1533d3ecd7a0..b5867eca1d0b 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -79,17 +79,6 @@ static unsigned long dummy_gettimeoffset(void)
}
#endif
-/*
- * An implementation of printk_clock() independent from
- * sched_clock(). This avoids non-bootable kernels when
- * printk_clock is enabled.
- */
-unsigned long long printk_clock(void)
-{
- return (unsigned long long)(jiffies - INITIAL_JIFFIES) *
- (1000000000 / HZ);
-}
-
static unsigned long next_rtc_update;
/*
@@ -195,7 +184,7 @@ static int leds_shutdown(struct sys_device *dev)
}
static struct sysdev_class leds_sysclass = {
- set_kset_name("leds"),
+ .name = "leds",
.shutdown = leds_shutdown,
.suspend = leds_suspend,
.resume = leds_resume,
@@ -336,7 +325,9 @@ void timer_tick(void)
profile_tick(CPU_PROFILING);
do_leds();
do_set_rtc();
+ write_seqlock(&xtime_lock);
do_timer(1);
+ write_sequnlock(&xtime_lock);
#ifndef CONFIG_SMP
update_process_times(user_mode(get_irq_regs()));
#endif
@@ -369,7 +360,7 @@ static int timer_resume(struct sys_device *dev)
#endif
static struct sysdev_class timer_sysclass = {
- set_kset_name("timer"),
+ .name = "timer",
.suspend = timer_suspend,
.resume = timer_resume,
};
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index c34db4e868fa..5595fdd75e82 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -19,6 +19,7 @@
#include <linux/kallsyms.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/kprobes.h>
#include <asm/atomic.h>
#include <asm/cacheflush.h>
@@ -46,15 +47,6 @@ __setup("user_debug=", user_debug_setup);
static void dump_mem(const char *str, unsigned long bottom, unsigned long top);
-static inline int in_exception_text(unsigned long ptr)
-{
- extern char __exception_text_start[];
- extern char __exception_text_end[];
-
- return ptr >= (unsigned long)&__exception_text_start &&
- ptr < (unsigned long)&__exception_text_end;
-}
-
void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
{
#ifdef CONFIG_KALLSYMS
@@ -322,6 +314,17 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
get_user(instr, (u32 __user *)pc);
}
+#ifdef CONFIG_KPROBES
+ /*
+ * It is possible to have recursive kprobes, so we can't call
+ * the kprobe trap handler with the undef_lock held.
+ */
+ if (instr == KPROBE_BREAKPOINT_INSTRUCTION && !user_mode(regs)) {
+ kprobe_trap_handler(regs, instr);
+ return;
+ }
+#endif
+
spin_lock_irqsave(&undef_lock, flags);
list_for_each_entry(hook, &undef_hook, node) {
if ((instr & hook->instr_mask) == hook->instr_val &&
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 5ff5406666b4..4898bdcfe7dd 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -30,7 +30,7 @@ SECTIONS
}
.init : { /* Init code and data */
- *(.init.text)
+ INIT_TEXT
_einittext = .;
__proc_info_begin = .;
*(.proc.info.init)
@@ -70,15 +70,15 @@ SECTIONS
__per_cpu_end = .;
#ifndef CONFIG_XIP_KERNEL
__init_begin = _stext;
- *(.init.data)
+ INIT_DATA
. = ALIGN(4096);
__init_end = .;
#endif
}
/DISCARD/ : { /* Exit code and data */
- *(.exit.text)
- *(.exit.data)
+ EXIT_TEXT
+ EXIT_DATA
*(.exitcall.exit)
#ifndef CONFIG_MMU
*(.fixup)
@@ -94,6 +94,7 @@ SECTIONS
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
+ KPROBES_TEXT
#ifdef CONFIG_MMU
*(.fixup)
#endif
@@ -129,7 +130,7 @@ SECTIONS
#ifdef CONFIG_XIP_KERNEL
. = ALIGN(4096);
__init_begin = .;
- *(.init.data)
+ INIT_DATA
. = ALIGN(4096);
__init_end = .;
#endif
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
index 0446ef2f5bd6..b016be2b0e35 100644
--- a/arch/arm/mach-aaec2000/core.c
+++ b/arch/arm/mach-aaec2000/core.c
@@ -130,13 +130,9 @@ static irqreturn_t
aaec2000_timer_interrupt(int irq, void *dev_id)
{
/* TODO: Check timer accuracy */
- write_seqlock(&xtime_lock);
-
timer_tick();
TIMER1_CLEAR = 1;
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 05a9f8a1b45e..074dcd5d9a7e 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -22,6 +22,9 @@ config ARCH_AT91SAM9263
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
+config ARCH_AT91CAP9
+ bool "AT91CAP9"
+
config ARCH_AT91X40
bool "AT91x40"
@@ -178,6 +181,21 @@ endif
# ----------------------------------------------------------
+if ARCH_AT91CAP9
+
+comment "AT91CAP9 Board Type"
+
+config MACH_AT91CAP9ADK
+ bool "Atmel AT91CAP9A-DK Evaluation Kit"
+ depends on ARCH_AT91CAP9
+ help
+ Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
+
+endif
+
+# ----------------------------------------------------------
+
if ARCH_AT91X40
comment "AT91X40 Board Type"
@@ -198,13 +216,13 @@ comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
bool "Enable DataFlash Card support"
- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK)
help
Enable support for the DataFlash card.
config MTD_NAND_AT91_BUSWIDTH_16
bool "Enable 16-bit data bus interface to NAND flash"
- depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
+ depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK)
help
On AT91SAM926x boards both types of NAND flash can be present
(8 and 16 bit data bus width).
@@ -219,6 +237,52 @@ config AT91_PROGRAMMABLE_CLOCKS
Select this if you need to program one or more of the PCK0..PCK3
programmable clock outputs.
+config AT91_TIMER_HZ
+ int "Kernel HZ (jiffies per second)"
+ range 32 1024
+ depends on ARCH_AT91
+ default "128" if ARCH_AT91RM9200
+ default "100"
+ help
+ On AT91rm9200 chips where you're using a system clock derived
+ from the 32768 Hz hardware clock, this tick rate should divide
+ it exactly: use a power-of-two value, such as 128 or 256, to
+ reduce timing errors caused by rounding.
+
+ On AT91sam926x chips, or otherwise when using a higher precision
+ system clock (of at least several MHz), rounding is less of a
+ problem so it can be safer to use a decimal values like 100.
+
+choice
+ prompt "Select a UART for early kernel messages"
+
+config AT91_EARLY_DBGU
+ bool "DBGU"
+
+config AT91_EARLY_USART0
+ bool "USART0"
+
+config AT91_EARLY_USART1
+ bool "USART1"
+
+config AT91_EARLY_USART2
+ bool "USART2"
+ depends on ! ARCH_AT91X40
+
+config AT91_EARLY_USART3
+ bool "USART3"
+ depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260)
+
+config AT91_EARLY_USART4
+ bool "USART4"
+ depends on ARCH_AT91SAM9260
+
+config AT91_EARLY_USART5
+ bool "USART5"
+ depends on ARCH_AT91SAM9260
+
+endchoice
+
endmenu
endif
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index a21f08c64ea6..bf5f293dccf8 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -8,7 +8,6 @@ obj-n :=
obj- :=
obj-$(CONFIG_AT91_PMC_UNIT) += clock.o
-obj-$(CONFIG_PM) += pm.o
# CPU-specific support
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
@@ -16,6 +15,7 @@ obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_d
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
+obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
@@ -29,7 +29,6 @@ obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
-obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
# AT91SAM9260 board-specific support
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
@@ -43,19 +42,17 @@ obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
# AT91SAM9RL board-specific support
obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
-# LEDs support
-led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
-led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
-led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o
-led-$(CONFIG_MACH_CSB337) += leds.o
-led-$(CONFIG_MACH_CSB637) += leds.o
-led-$(CONFIG_MACH_KB9200) += leds.o
-led-$(CONFIG_MACH_KAFA) += leds.o
-obj-$(CONFIG_LEDS) += $(led-y)
+# AT91CAP9 board-specific support
+obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
-# VGA support
-#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
+# AT91X40 board-specific support
+obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
+# Drivers
+obj-y += leds.o
+
+# Power Management
+obj-$(CONFIG_PM) += pm.o
ifeq ($(CONFIG_PM_DEBUG),y)
CFLAGS_pm.o += -DDEBUG
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index e667dcc7cd34..071a2506a69f 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -3,7 +3,12 @@
# PARAMS_PHYS must be within 4MB of ZRELADDR
# INITRD_PHYS must be in RAM
+ifeq ($(CONFIG_ARCH_AT91CAP9),y)
+ zreladdr-y := 0x70008000
+params_phys-y := 0x70000100
+initrd_phys-y := 0x70410000
+else
zreladdr-y := 0x20008000
params_phys-y := 0x20000100
initrd_phys-y := 0x20410000
-
+endif
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
new file mode 100644
index 000000000000..48d27d8000b0
--- /dev/null
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -0,0 +1,365 @@
+/*
+ * arch/arm/mach-at91/at91cap9.c
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91cap9.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91cap9_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91CAP9_SRAM_SIZE,
+ .pfn = __phys_to_pfn(AT91CAP9_SRAM_BASE),
+ .length = AT91CAP9_SRAM_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioABCD_clk = {
+ .name = "pioABCD_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_PIOABCD,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb0_clk = {
+ .name = "mpb0_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MPB0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb1_clk = {
+ .name = "mpb1_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MPB1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb2_clk = {
+ .name = "mpb2_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MPB2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb3_clk = {
+ .name = "mpb3_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MPB3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb4_clk = {
+ .name = "mpb4_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MPB4,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+ .name = "mci0_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MCI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+ .name = "mci1_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MCI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk can_clk = {
+ .name = "can_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_CAN,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+ .name = "twi_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_TWI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc0_clk = {
+ .name = "ssc0_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_SSC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+ .name = "ssc1_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_SSC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ac97_clk = {
+ .name = "ac97_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_AC97C,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+ .name = "tcb_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_TCB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwmc_clk = {
+ .name = "pwmc_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_PWMC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+ .name = "macb_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_EMAC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk aestdes_clk = {
+ .name = "aestdes_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_AESTDES,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk adc_clk = {
+ .name = "adc_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_ADC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+ .name = "isi_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_ISI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+ .name = "lcdc_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_LCDC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma_clk = {
+ .name = "dma_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_DMA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udphs_clk = {
+ .name = "udphs_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_UDPHS,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_UHP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioABCD_clk,
+ &mpb0_clk,
+ &mpb1_clk,
+ &mpb2_clk,
+ &mpb3_clk,
+ &mpb4_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &mmc0_clk,
+ &mmc1_clk,
+ &can_clk,
+ &twi_clk,
+ &spi0_clk,
+ &spi1_clk,
+ &ssc0_clk,
+ &ssc1_clk,
+ &ac97_clk,
+ &tcb_clk,
+ &pwmc_clk,
+ &macb_clk,
+ &aestdes_clk,
+ &adc_clk,
+ &isi_clk,
+ &lcdc_clk,
+ &dma_clk,
+ &udphs_clk,
+ &ohci_clk,
+ // irq0 .. irq1
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+static struct clk pck2 = {
+ .name = "pck2",
+ .pmc_mask = AT91_PMC_PCK2,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 2,
+};
+static struct clk pck3 = {
+ .name = "pck3",
+ .pmc_mask = AT91_PMC_PCK3,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 3,
+};
+
+static void __init at91cap9_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+ clk_register(&pck2);
+ clk_register(&pck3);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91cap9_gpio[] = {
+ {
+ .id = AT91CAP9_ID_PIOABCD,
+ .offset = AT91_PIOA,
+ .clock = &pioABCD_clk,
+ }, {
+ .id = AT91CAP9_ID_PIOABCD,
+ .offset = AT91_PIOB,
+ .clock = &pioABCD_clk,
+ }, {
+ .id = AT91CAP9_ID_PIOABCD,
+ .offset = AT91_PIOC,
+ .clock = &pioABCD_clk,
+ }, {
+ .id = AT91CAP9_ID_PIOABCD,
+ .offset = AT91_PIOD,
+ .clock = &pioABCD_clk,
+ }
+};
+
+static void at91cap9_reset(void)
+{
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+/* --------------------------------------------------------------------
+ * AT91CAP9 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91cap9_initialize(unsigned long main_clock)
+{
+ /* Map peripherals */
+ iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc));
+
+ at91_arch_reset = at91cap9_reset;
+ at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at91cap9_register_clocks();
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91cap9_gpio, 4);
+}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller (FIQ) */
+ 7, /* System Peripherals */
+ 1, /* Parallel IO Controller A, B, C and D */
+ 0, /* MP Block Peripheral 0 */
+ 0, /* MP Block Peripheral 1 */
+ 0, /* MP Block Peripheral 2 */
+ 0, /* MP Block Peripheral 3 */
+ 0, /* MP Block Peripheral 4 */
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
+ 0, /* Multimedia Card Interface 0 */
+ 0, /* Multimedia Card Interface 1 */
+ 3, /* CAN */
+ 6, /* Two-Wire Interface */
+ 5, /* Serial Peripheral Interface 0 */
+ 5, /* Serial Peripheral Interface 1 */
+ 4, /* Serial Synchronous Controller 0 */
+ 4, /* Serial Synchronous Controller 1 */
+ 5, /* AC97 Controller */
+ 0, /* Timer Counter 0, 1 and 2 */
+ 0, /* Pulse Width Modulation Controller */
+ 3, /* Ethernet */
+ 0, /* Advanced Encryption Standard, Triple DES*/
+ 0, /* Analog-to-Digital Converter */
+ 0, /* Image Sensor Interface */
+ 3, /* LCD Controller */
+ 0, /* DMA Controller */
+ 2, /* USB Device Port */
+ 2, /* USB Host port */
+ 0, /* Advanced Interrupt Controller (IRQ0) */
+ 0, /* Advanced Interrupt Controller (IRQ1) */
+};
+
+void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+ if (!priority)
+ priority = at91cap9_default_irq_priority;
+
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
new file mode 100644
index 000000000000..c50fad9cd143
--- /dev/null
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -0,0 +1,1066 @@
+/*
+ * arch/arm/mach-at91/at91cap9_devices.c
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91cap9.h>
+#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91cap9_matrix.h>
+
+#include "generic.h"
+
+
+/* --------------------------------------------------------------------
+ * USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+ [0] = {
+ .start = AT91CAP9_UHP_BASE,
+ .end = AT91CAP9_UHP_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_UHP,
+ .end = AT91CAP9_ID_UHP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_usbh_device = {
+ .name = "at91_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &usbh_data,
+ },
+ .resource = usbh_resources,
+ .num_resources = ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+ int i;
+
+ if (!data)
+ return;
+
+ /* Enable VBus control for UHP ports */
+ for (i = 0; i < data->ports; i++) {
+ if (data->vbus_pin[i])
+ at91_set_gpio_output(data->vbus_pin[i], 0);
+ }
+
+ usbh_data = *data;
+ platform_device_register(&at91_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = DMA_BIT_MASK(32);
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_EMAC,
+ .end = AT91CAP9_BASE_EMAC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_EMAC,
+ .end = AT91CAP9_ID_EMAC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_eth_device = {
+ .name = "macb",
+ .id = -1,
+ .dev = {
+ .dma_mask = &eth_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &eth_data,
+ },
+ .resource = eth_resources,
+ .num_resources = ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->phy_irq_pin) {
+ at91_set_gpio_input(data->phy_irq_pin, 0);
+ at91_set_deglitch(data->phy_irq_pin, 1);
+ }
+
+ /* Pins used for MII and RMII */
+ at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */
+ at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */
+
+ if (!data->is_rmii) {
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
+ }
+
+ eth_data = *data;
+ platform_device_register(&at91cap9_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
+static struct at91_mmc_data mmc0_data, mmc1_data;
+
+static struct resource mmc0_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_MCI0,
+ .end = AT91CAP9_BASE_MCI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_MCI0,
+ .end = AT91CAP9_ID_MCI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_mmc0_device = {
+ .name = "at91_mci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &mmc0_data,
+ },
+ .resource = mmc0_resources,
+ .num_resources = ARRAY_SIZE(mmc0_resources),
+};
+
+static struct resource mmc1_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_MCI1,
+ .end = AT91CAP9_BASE_MCI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_MCI1,
+ .end = AT91CAP9_ID_MCI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_mmc1_device = {
+ .name = "at91_mci",
+ .id = 1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &mmc1_data,
+ },
+ .resource = mmc1_resources,
+ .num_resources = ARRAY_SIZE(mmc1_resources),
+};
+
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+{
+ if (!data)
+ return;
+
+ /* input/irq */
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+ if (data->wp_pin)
+ at91_set_gpio_input(data->wp_pin, 1);
+ if (data->vcc_pin)
+ at91_set_gpio_output(data->vcc_pin, 0);
+
+ if (mmc_id == 0) { /* MCI0 */
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA2, 0);
+
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA1, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA0, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA3, 1);
+ at91_set_A_periph(AT91_PIN_PA4, 1);
+ at91_set_A_periph(AT91_PIN_PA5, 1);
+ }
+
+ mmc0_data = *data;
+ at91_clock_associate("mci0_clk", &at91cap9_mmc1_device.dev, "mci_clk");
+ platform_device_register(&at91cap9_mmc0_device);
+ } else { /* MCI1 */
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA16, 0);
+
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA17, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA18, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA19, 1);
+ at91_set_A_periph(AT91_PIN_PA20, 1);
+ at91_set_A_periph(AT91_PIN_PA21, 1);
+ }
+
+ mmc1_data = *data;
+ at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk");
+ platform_device_register(&at91cap9_mmc1_device);
+ }
+}
+#else
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+ {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91cap9_nand_device = {
+ .name = "at91_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+ unsigned long csa, mode;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1)
+ | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1));
+
+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6)
+ | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6));
+
+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
+
+ if (data->bus_width_16)
+ mode = AT91_SMC_DBW_16;
+ else
+ mode = AT91_SMC_DBW_8;
+ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ nand_data = *data;
+ platform_device_register(&at91cap9_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+ .sda_pin = AT91_PIN_PB4,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PB5,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91cap9_twi_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .dev.platform_data = &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at91cap9_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_TWI,
+ .end = AT91CAP9_BASE_TWI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_TWI,
+ .end = AT91CAP9_ID_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_twi_device = {
+ .name = "at91_i2c",
+ .id = -1,
+ .resource = twi_resources,
+ .num_resources = ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ /* pins used for TWI interface */
+ at91_set_B_periph(AT91_PIN_PB4, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+ at91_set_B_periph(AT91_PIN_PB5, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at91cap9_twi_device);
+}
+#else
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+static struct resource spi0_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_SPI0,
+ .end = AT91CAP9_BASE_SPI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_SPI0,
+ .end = AT91CAP9_ID_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_spi0_device = {
+ .name = "atmel_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 };
+
+static struct resource spi1_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_SPI1,
+ .end = AT91CAP9_BASE_SPI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_SPI1,
+ .end = AT91CAP9_ID_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_spi1_device = {
+ .name = "atmel_spi",
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+ int i;
+ unsigned long cs_pin;
+ short enable_spi0 = 0;
+ short enable_spi1 = 0;
+
+ /* Choose SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else if (devices[i].bus_num == 0)
+ cs_pin = spi0_standard_cs[devices[i].chip_select];
+ else
+ cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+ if (devices[i].bus_num == 0)
+ enable_spi0 = 1;
+ else
+ enable_spi1 = 1;
+
+ /* enable chip-select pin */
+ at91_set_gpio_output(cs_pin, 1);
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+
+ /* Configure SPI bus(es) */
+ if (enable_spi0) {
+ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk");
+ platform_device_register(&at91cap9_spi0_device);
+ }
+ if (enable_spi1) {
+ at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk");
+ platform_device_register(&at91cap9_spi1_device);
+ }
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * RTT
+ * -------------------------------------------------------------------- */
+
+static struct platform_device at91cap9_rtt_device = {
+ .name = "at91_rtt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_rtt(void)
+{
+ platform_device_register(&at91cap9_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91cap9_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at91cap9_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * AC97
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
+static struct atmel_ac97_data ac97_data;
+
+static struct resource ac97_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_AC97C,
+ .end = AT91CAP9_BASE_AC97C + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_AC97C,
+ .end = AT91CAP9_ID_AC97C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_ac97_device = {
+ .name = "ac97c",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ac97_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &ac97_data,
+ },
+ .resource = ac97_resources,
+ .num_resources = ARRAY_SIZE(ac97_resources),
+};
+
+void __init at91_add_device_ac97(struct atmel_ac97_data *data)
+{
+ if (!data)
+ return;
+
+ at91_set_A_periph(AT91_PIN_PA6, 0); /* AC97FS */
+ at91_set_A_periph(AT91_PIN_PA7, 0); /* AC97CK */
+ at91_set_A_periph(AT91_PIN_PA8, 0); /* AC97TX */
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */
+
+ /* reset */
+ if (data->reset_pin)
+ at91_set_gpio_output(data->reset_pin, 0);
+
+ ac97_data = *data;
+ platform_device_register(&at91cap9_ac97_device);
+}
+#else
+void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
+static struct atmel_lcdfb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+ [0] = {
+ .start = AT91CAP9_LCDC_BASE,
+ .end = AT91CAP9_LCDC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_LCDC,
+ .end = AT91CAP9_ID_LCDC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_lcdc_device = {
+ .name = "atmel_lcdfb",
+ .id = 0,
+ .dev = {
+ .dma_mask = &lcdc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &lcdc_data,
+ },
+ .resource = lcdc_resources,
+ .num_resources = ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+{
+ if (!data)
+ return;
+
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
+ at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
+ at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
+ at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
+ at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
+ at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
+ at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
+ at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */
+ at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
+ at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
+ at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
+ at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
+ at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
+ at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */
+ at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
+ at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
+
+ lcdc_data = *data;
+ platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_SSC0,
+ .end = AT91CAP9_BASE_SSC0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_SSC0,
+ .end = AT91CAP9_ID_SSC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_ssc0_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc0_resources,
+ .num_resources = ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB0, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB1, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB2, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB3, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB4, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB5, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_SSC1,
+ .end = AT91CAP9_BASE_SSC1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_SSC1,
+ .end = AT91CAP9_ID_SSC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_ssc1_device = {
+ .name = "ssc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ssc1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc1_resources,
+ .num_resources = ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB6, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB7, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB8, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB9, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB10, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB11, 1);
+}
+
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91CAP9_ID_SSC0:
+ pdev = &at91cap9_ssc0_device;
+ configure_ssc0_pins(pins);
+ at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
+ break;
+ case AT91CAP9_ID_SSC1:
+ pdev = &at91cap9_ssc1_device;
+ configure_ssc1_pins(pins);
+ at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
+ break;
+ default:
+ return;
+ }
+
+ platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91cap9_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_US0,
+ .end = AT91CAP9_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_US0,
+ .end = AT91CAP9_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91cap9_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PA24, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA25, 0); /* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_US1,
+ .end = AT91CAP9_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_US1,
+ .end = AT91CAP9_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91cap9_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_US2,
+ .end = AT91CAP9_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_US2,
+ .end = AT91CAP9_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91cap9_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
+}
+
+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91cap9_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91CAP9_ID_US0:
+ pdev = &at91cap9_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91CAP9_ID_US1:
+ pdev = &at91cap9_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91CAP9_ID_US2:
+ pdev = &at91cap9_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+}
+#else
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
+ return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 2cad2bf864be..d688c1dbd925 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -301,28 +301,28 @@ void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks
static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller (FIQ) */
7, /* System Peripherals */
- 0, /* Parallel IO Controller A */
- 0, /* Parallel IO Controller B */
- 0, /* Parallel IO Controller C */
- 0, /* Parallel IO Controller D */
- 6, /* USART 0 */
- 6, /* USART 1 */
- 6, /* USART 2 */
- 6, /* USART 3 */
+ 1, /* Parallel IO Controller A */
+ 1, /* Parallel IO Controller B */
+ 1, /* Parallel IO Controller C */
+ 1, /* Parallel IO Controller D */
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
+ 5, /* USART 3 */
0, /* Multimedia Card Interface */
- 4, /* USB Device Port */
- 0, /* Two-Wire Interface */
- 6, /* Serial Peripheral Interface */
- 5, /* Serial Synchronous Controller 0 */
- 5, /* Serial Synchronous Controller 1 */
- 5, /* Serial Synchronous Controller 2 */
+ 2, /* USB Device Port */
+ 6, /* Two-Wire Interface */
+ 5, /* Serial Peripheral Interface */
+ 4, /* Serial Synchronous Controller 0 */
+ 4, /* Serial Synchronous Controller 1 */
+ 4, /* Serial Synchronous Controller 2 */
0, /* Timer Counter 0 */
0, /* Timer Counter 1 */
0, /* Timer Counter 2 */
0, /* Timer Counter 3 */
0, /* Timer Counter 4 */
0, /* Timer Counter 5 */
- 3, /* USB Host port */
+ 2, /* USB Host port */
3, /* Ethernet MAC */
0, /* Advanced Interrupt Controller (IRQ0) */
0, /* Advanced Interrupt Controller (IRQ1) */
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 9296833f91cc..ef6aeb86e980 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -13,6 +13,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -29,7 +30,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = 0xffffffffUL;
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
static struct at91_usbh_data usbh_data;
static struct resource usbh_resources[] = {
@@ -50,7 +51,7 @@ static struct platform_device at91rm9200_usbh_device = {
.id = -1,
.dev = {
.dma_mask = &ohci_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &usbh_data,
},
.resource = usbh_resources,
@@ -125,7 +126,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
* -------------------------------------------------------------------- */
#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
-static u64 eth_dmamask = 0xffffffffUL;
+static u64 eth_dmamask = DMA_BIT_MASK(32);
static struct at91_eth_data eth_data;
static struct resource eth_resources[] = {
@@ -146,7 +147,7 @@ static struct platform_device at91rm9200_eth_device = {
.id = -1,
.dev = {
.dma_mask = &eth_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &eth_data,
},
.resource = eth_resources,
@@ -285,7 +286,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) {}
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc_data;
static struct resource mmc_resources[] = {
@@ -306,7 +307,7 @@ static struct platform_device at91rm9200_mmc_device = {
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc_data,
},
.resource = mmc_resources,
@@ -375,7 +376,7 @@ static struct at91_nand_data nand_data;
static struct resource nand_resources[] = {
{
.start = NAND_BASE,
- .end = NAND_BASE + SZ_8M - 1,
+ .end = NAND_BASE + SZ_256M - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -513,7 +514,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
* -------------------------------------------------------------------- */
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
+static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct resource spi_resources[] = {
[0] = {
@@ -533,7 +534,7 @@ static struct platform_device at91rm9200_spi_device = {
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi_resources,
.num_resources = ARRAY_SIZE(spi_resources),
@@ -557,8 +558,11 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
else
cs_pin = spi_standard_cs[devices[i].chip_select];
- /* enable chip-select pin */
- at91_set_gpio_output(cs_pin, 1);
+ if (devices[i].chip_select == 0) /* for CS0 errata */
+ at91_set_A_periph(cs_pin, 0);
+ else
+ at91_set_gpio_output(cs_pin, 1);
+
/* pass chip-select pin to driver */
devices[i].controller_data = (void *) cs_pin;
@@ -613,24 +617,175 @@ static void __init at91_add_device_watchdog(void) {}
/* --------------------------------------------------------------------
- * LEDs
+ * SSC -- Synchronous Serial Controller
* -------------------------------------------------------------------- */
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_SSC0,
+ .end = AT91RM9200_BASE_SSC0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91RM9200_ID_SSC0,
+ .end = AT91RM9200_ID_SSC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91rm9200_ssc0_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc0_resources,
+ .num_resources = ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB0, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB1, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB2, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB3, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB4, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB5, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_SSC1,
+ .end = AT91RM9200_BASE_SSC1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91RM9200_ID_SSC1,
+ .end = AT91RM9200_ID_SSC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91rm9200_ssc1_device = {
+ .name = "ssc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ssc1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc1_resources,
+ .num_resources = ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB6, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB7, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB8, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB9, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB10, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB11, 1);
+}
+
+static u64 ssc2_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc2_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_SSC2,
+ .end = AT91RM9200_BASE_SSC2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91RM9200_ID_SSC2,
+ .end = AT91RM9200_ID_SSC2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91rm9200_ssc2_device = {
+ .name = "ssc",
+ .id = 2,
+ .dev = {
+ .dma_mask = &ssc2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc2_resources,
+ .num_resources = ARRAY_SIZE(ssc2_resources),
+};
+
+static inline void configure_ssc2_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB12, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB13, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB14, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB15, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB16, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB17, 1);
+}
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
{
- /* Enable GPIO to access the LEDs */
- at91_set_gpio_output(cpu_led, 1);
- at91_set_gpio_output(timer_led, 1);
+ struct platform_device *pdev;
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91RM9200_ID_SSC0:
+ pdev = &at91rm9200_ssc0_device;
+ configure_ssc0_pins(pins);
+ at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
+ break;
+ case AT91RM9200_ID_SSC1:
+ pdev = &at91rm9200_ssc1_device;
+ configure_ssc1_pins(pins);
+ at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
+ break;
+ case AT91RM9200_ID_SSC2:
+ pdev = &at91rm9200_ssc2_device;
+ configure_ssc2_pins(pins);
+ at91_clock_associate("ssc2_clk", &pdev->dev, "ssc");
+ break;
+ default:
+ return;
+ }
+
+ platform_device_register(pdev);
}
+
#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#endif
@@ -658,12 +813,15 @@ static struct atmel_uart_data dbgu_data = {
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91rm9200_dbgu_device = {
.name = "atmel_usart",
.id = 0,
.dev = {
- .platform_data = &dbgu_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
},
.resource = dbgu_resources,
.num_resources = ARRAY_SIZE(dbgu_resources),
@@ -693,28 +851,35 @@ static struct atmel_uart_data uart0_data = {
.use_dma_rx = 1,
};
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91rm9200_uart0_device = {
.name = "atmel_usart",
.id = 1,
.dev = {
- .platform_data = &uart0_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
},
.resource = uart0_resources,
.num_resources = ARRAY_SIZE(uart0_resources),
};
-static inline void configure_usart0_pins(void)
+static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA17, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PA18, 0); /* RXD0 */
- at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */
- /*
- * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
- * We need to drive the pin manually. Default is off (RTS is active low).
- */
- at91_set_gpio_output(AT91_PIN_PA21, 1);
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */
+
+ if (pins & ATMEL_UART_RTS) {
+ /*
+ * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
+ * We need to drive the pin manually. Default is off (RTS is active low).
+ */
+ at91_set_gpio_output(AT91_PIN_PA21, 1);
+ }
}
static struct resource uart1_resources[] = {
@@ -735,27 +900,37 @@ static struct atmel_uart_data uart1_data = {
.use_dma_rx = 1,
};
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91rm9200_uart1_device = {
.name = "atmel_usart",
.id = 2,
.dev = {
- .platform_data = &uart1_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
},
.resource = uart1_resources,
.num_resources = ARRAY_SIZE(uart1_resources),
};
-static inline void configure_usart1_pins(void)
+static inline void configure_usart1_pins(unsigned pins)
{
- at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */
- at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */
at91_set_A_periph(AT91_PIN_PB20, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PB21, 0); /* RXD1 */
- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */
- at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */
- at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */
- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */
+
+ if (pins & ATMEL_UART_RI)
+ at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */
+ if (pins & ATMEL_UART_DTR)
+ at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */
+ if (pins & ATMEL_UART_DCD)
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */
+ if (pins & ATMEL_UART_DSR)
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */
}
static struct resource uart2_resources[] = {
@@ -776,21 +951,29 @@ static struct atmel_uart_data uart2_data = {
.use_dma_rx = 1,
};
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91rm9200_uart2_device = {
.name = "atmel_usart",
.id = 3,
.dev = {
- .platform_data = &uart2_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
},
.resource = uart2_resources,
.num_resources = ARRAY_SIZE(uart2_resources),
};
-static inline void configure_usart2_pins(void)
+static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA22, 0); /* RXD2 */
at91_set_A_periph(AT91_PIN_PA23, 1); /* TXD2 */
+
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PA30, 0); /* CTS2 */
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PA31, 0); /* RTS2 */
}
static struct resource uart3_resources[] = {
@@ -811,27 +994,35 @@ static struct atmel_uart_data uart3_data = {
.use_dma_rx = 1,
};
+static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91rm9200_uart3_device = {
.name = "atmel_usart",
.id = 4,
.dev = {
- .platform_data = &uart3_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart3_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart3_data,
},
.resource = uart3_resources,
.num_resources = ARRAY_SIZE(uart3_resources),
};
-static inline void configure_usart3_pins(void)
+static inline void configure_usart3_pins(unsigned pins)
{
at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */
at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */
+
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */
}
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
-void __init at91_init_serial(struct at91_uart_config *config)
+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
{
int i;
@@ -839,22 +1030,22 @@ void __init at91_init_serial(struct at91_uart_config *config)
for (i = 0; i < config->nr_tty; i++) {
switch (config->tty_map[i]) {
case 0:
- configure_usart0_pins();
+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91rm9200_uart0_device;
at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
break;
case 1:
- configure_usart1_pins();
+ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
at91_uarts[i] = &at91rm9200_uart1_device;
at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
break;
case 2:
- configure_usart2_pins();
+ configure_usart2_pins(0);
at91_uarts[i] = &at91rm9200_uart2_device;
at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
break;
case 3:
- configure_usart3_pins();
+ configure_usart3_pins(0);
at91_uarts[i] = &at91rm9200_uart3_device;
at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
break;
@@ -876,6 +1067,53 @@ void __init at91_init_serial(struct at91_uart_config *config)
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91rm9200_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91RM9200_ID_US0:
+ pdev = &at91rm9200_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91RM9200_ID_US1:
+ pdev = &at91rm9200_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91RM9200_ID_US2:
+ pdev = &at91rm9200_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ case AT91RM9200_ID_US3:
+ pdev = &at91rm9200_uart3_device;
+ configure_usart3_pins(pins);
+ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
void __init at91_add_device_serial(void)
{
int i;
@@ -886,7 +1124,9 @@ void __init at91_add_device_serial(void)
}
}
#else
-void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index e47381e8aaba..18d06612ce8a 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -327,30 +327,30 @@ void __init at91sam9260_initialize(unsigned long main_clock)
static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller */
7, /* System Peripherals */
- 0, /* Parallel IO Controller A */
- 0, /* Parallel IO Controller B */
- 0, /* Parallel IO Controller C */
+ 1, /* Parallel IO Controller A */
+ 1, /* Parallel IO Controller B */
+ 1, /* Parallel IO Controller C */
0, /* Analog-to-Digital Converter */
- 6, /* USART 0 */
- 6, /* USART 1 */
- 6, /* USART 2 */
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
0, /* Multimedia Card Interface */
- 4, /* USB Device Port */
- 0, /* Two-Wire Interface */
- 6, /* Serial Peripheral Interface 0 */
- 6, /* Serial Peripheral Interface 1 */
+ 2, /* USB Device Port */
+ 6, /* Two-Wire Interface */
+ 5, /* Serial Peripheral Interface 0 */
+ 5, /* Serial Peripheral Interface 1 */
5, /* Serial Synchronous Controller */
0,
0,
0, /* Timer Counter 0 */
0, /* Timer Counter 1 */
0, /* Timer Counter 2 */
- 3, /* USB Host port */
+ 2, /* USB Host port */
3, /* Ethernet */
0, /* Image Sensor Interface */
- 6, /* USART 3 */
- 6, /* USART 4 */
- 6, /* USART 5 */
+ 5, /* USART 3 */
+ 5, /* USART 4 */
+ 5, /* USART 5 */
0, /* Timer Counter 3 */
0, /* Timer Counter 4 */
0, /* Timer Counter 5 */
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 3091bf47d8c9..105f8403860b 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -12,6 +12,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -29,7 +30,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = 0xffffffffUL;
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
static struct at91_usbh_data usbh_data;
static struct resource usbh_resources[] = {
@@ -50,7 +51,7 @@ static struct platform_device at91_usbh_device = {
.id = -1,
.dev = {
.dma_mask = &ohci_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &usbh_data,
},
.resource = usbh_resources,
@@ -125,7 +126,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
* -------------------------------------------------------------------- */
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = 0xffffffffUL;
+static u64 eth_dmamask = DMA_BIT_MASK(32);
static struct at91_eth_data eth_data;
static struct resource eth_resources[] = {
@@ -146,7 +147,7 @@ static struct platform_device at91sam9260_eth_device = {
.id = -1,
.dev = {
.dma_mask = &eth_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &eth_data,
},
.resource = eth_resources,
@@ -199,7 +200,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data) {}
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc_data;
static struct resource mmc_resources[] = {
@@ -220,7 +221,7 @@ static struct platform_device at91sam9260_mmc_device = {
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc_data,
},
.resource = mmc_resources,
@@ -289,7 +290,7 @@ static struct at91_nand_data nand_data;
static struct resource nand_resources[] = {
{
.start = NAND_BASE,
- .end = NAND_BASE + SZ_8M - 1,
+ .end = NAND_BASE + SZ_256M - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -312,7 +313,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
return;
csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* set the bus interface characteristics */
at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
@@ -431,7 +432,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
* -------------------------------------------------------------------- */
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
+static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct resource spi0_resources[] = {
[0] = {
@@ -451,7 +452,7 @@ static struct platform_device at91sam9260_spi0_device = {
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi0_resources,
.num_resources = ARRAY_SIZE(spi0_resources),
@@ -477,7 +478,7 @@ static struct platform_device at91sam9260_spi1_device = {
.id = 1,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi1_resources,
.num_resources = ARRAY_SIZE(spi1_resources),
@@ -539,24 +540,126 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
/* --------------------------------------------------------------------
- * LEDs
+ * RTT
* -------------------------------------------------------------------- */
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
+static struct resource rtt_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT,
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+static struct platform_device at91sam9260_rtt_device = {
+ .name = "at91_rtt",
+ .id = -1,
+ .resource = rtt_resources,
+ .num_resources = ARRAY_SIZE(rtt_resources),
+};
+
+static void __init at91_add_device_rtt(void)
{
- /* Enable GPIO to access the LEDs */
- at91_set_gpio_output(cpu_led, 1);
- at91_set_gpio_output(timer_led, 1);
+ platform_device_register(&at91sam9260_rtt_device);
+}
+
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91sam9260_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at91sam9260_wdt_device);
}
#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_SSC,
+ .end = AT91SAM9260_BASE_SSC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_SSC,
+ .end = AT91SAM9260_ID_SSC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9260_ssc_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc_resources,
+ .num_resources = ARRAY_SIZE(ssc_resources),
+};
+
+static inline void configure_ssc_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB17, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB16, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB18, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB19, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB20, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB21, 1);
+}
+
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91SAM9260_ID_SSC:
+ pdev = &at91sam9260_ssc_device;
+ configure_ssc_pins(pins);
+ at91_clock_associate("ssc_clk", &pdev->dev, "pclk");
+ break;
+ default:
+ return;
+ }
+
+ platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#endif
@@ -583,12 +686,15 @@ static struct atmel_uart_data dbgu_data = {
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_dbgu_device = {
.name = "atmel_usart",
.id = 0,
.dev = {
- .platform_data = &dbgu_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
},
.resource = dbgu_resources,
.num_resources = ARRAY_SIZE(dbgu_resources),
@@ -618,27 +724,37 @@ static struct atmel_uart_data uart0_data = {
.use_dma_rx = 1,
};
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_uart0_device = {
.name = "atmel_usart",
.id = 1,
.dev = {
- .platform_data = &uart0_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
},
.resource = uart0_resources,
.num_resources = ARRAY_SIZE(uart0_resources),
};
-static inline void configure_usart0_pins(void)
+static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
- at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
- at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
- at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
- at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
+ if (pins & ATMEL_UART_DTR)
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
+ if (pins & ATMEL_UART_DSR)
+ at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
+ if (pins & ATMEL_UART_DCD)
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
+ if (pins & ATMEL_UART_RI)
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
}
static struct resource uart1_resources[] = {
@@ -659,23 +775,29 @@ static struct atmel_uart_data uart1_data = {
.use_dma_rx = 1,
};
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_uart1_device = {
.name = "atmel_usart",
.id = 2,
.dev = {
- .platform_data = &uart1_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
},
.resource = uart1_resources,
.num_resources = ARRAY_SIZE(uart1_resources),
};
-static inline void configure_usart1_pins(void)
+static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
- at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
- at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
}
static struct resource uart2_resources[] = {
@@ -696,21 +818,29 @@ static struct atmel_uart_data uart2_data = {
.use_dma_rx = 1,
};
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_uart2_device = {
.name = "atmel_usart",
.id = 3,
.dev = {
- .platform_data = &uart2_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
},
.resource = uart2_resources,
.num_resources = ARRAY_SIZE(uart2_resources),
};
-static inline void configure_usart2_pins(void)
+static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PA4, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA5, 0); /* CTS2 */
}
static struct resource uart3_resources[] = {
@@ -731,21 +861,29 @@ static struct atmel_uart_data uart3_data = {
.use_dma_rx = 1,
};
+static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_uart3_device = {
.name = "atmel_usart",
.id = 4,
.dev = {
- .platform_data = &uart3_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart3_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart3_data,
},
.resource = uart3_resources,
.num_resources = ARRAY_SIZE(uart3_resources),
};
-static inline void configure_usart3_pins(void)
+static inline void configure_usart3_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */
at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PC8, 0); /* RTS3 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PC10, 0); /* CTS3 */
}
static struct resource uart4_resources[] = {
@@ -766,12 +904,15 @@ static struct atmel_uart_data uart4_data = {
.use_dma_rx = 1,
};
+static u64 uart4_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_uart4_device = {
.name = "atmel_usart",
.id = 5,
.dev = {
- .platform_data = &uart4_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart4_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart4_data,
},
.resource = uart4_resources,
.num_resources = ARRAY_SIZE(uart4_resources),
@@ -801,12 +942,15 @@ static struct atmel_uart_data uart5_data = {
.use_dma_rx = 1,
};
+static u64 uart5_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_uart5_device = {
.name = "atmel_usart",
.id = 6,
.dev = {
- .platform_data = &uart5_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart5_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart5_data,
},
.resource = uart5_resources,
.num_resources = ARRAY_SIZE(uart5_resources),
@@ -818,10 +962,10 @@ static inline void configure_usart5_pins(void)
at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */
}
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
-void __init at91_init_serial(struct at91_uart_config *config)
+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
{
int i;
@@ -829,22 +973,22 @@ void __init at91_init_serial(struct at91_uart_config *config)
for (i = 0; i < config->nr_tty; i++) {
switch (config->tty_map[i]) {
case 0:
- configure_usart0_pins();
+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
at91_uarts[i] = &at91sam9260_uart0_device;
at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart");
break;
case 1:
- configure_usart1_pins();
+ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91sam9260_uart1_device;
at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart");
break;
case 2:
- configure_usart2_pins();
+ configure_usart2_pins(0);
at91_uarts[i] = &at91sam9260_uart2_device;
at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart");
break;
case 3:
- configure_usart3_pins();
+ configure_usart3_pins(0);
at91_uarts[i] = &at91sam9260_uart3_device;
at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart");
break;
@@ -876,6 +1020,63 @@ void __init at91_init_serial(struct at91_uart_config *config)
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91sam9260_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91SAM9260_ID_US0:
+ pdev = &at91sam9260_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9260_ID_US1:
+ pdev = &at91sam9260_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9260_ID_US2:
+ pdev = &at91sam9260_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9260_ID_US3:
+ pdev = &at91sam9260_uart3_device;
+ configure_usart3_pins(pins);
+ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9260_ID_US4:
+ pdev = &at91sam9260_uart4_device;
+ configure_usart4_pins();
+ at91_clock_associate("usart4_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9260_ID_US5:
+ pdev = &at91sam9260_uart5_device;
+ configure_usart5_pins();
+ at91_clock_associate("usart5_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
void __init at91_add_device_serial(void)
{
int i;
@@ -886,7 +1087,9 @@ void __init at91_add_device_serial(void)
}
}
#else
-void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
@@ -898,6 +1101,8 @@ void __init at91_add_device_serial(void) {}
*/
static int __init at91_add_standard_devices(void)
{
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
return 0;
}
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index dfe8c39c9fb9..90b87e1877d9 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -279,25 +279,25 @@ void __init at91sam9261_initialize(unsigned long main_clock)
static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller */
7, /* System Peripherals */
- 0, /* Parallel IO Controller A */
- 0, /* Parallel IO Controller B */
- 0, /* Parallel IO Controller C */
+ 1, /* Parallel IO Controller A */
+ 1, /* Parallel IO Controller B */
+ 1, /* Parallel IO Controller C */
0,
- 6, /* USART 0 */
- 6, /* USART 1 */
- 6, /* USART 2 */
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
0, /* Multimedia Card Interface */
- 4, /* USB Device Port */
- 0, /* Two-Wire Interface */
- 6, /* Serial Peripheral Interface 0 */
- 6, /* Serial Peripheral Interface 1 */
- 5, /* Serial Synchronous Controller 0 */
- 5, /* Serial Synchronous Controller 1 */
- 5, /* Serial Synchronous Controller 2 */
+ 2, /* USB Device Port */
+ 6, /* Two-Wire Interface */
+ 5, /* Serial Peripheral Interface 0 */
+ 5, /* Serial Peripheral Interface 1 */
+ 4, /* Serial Synchronous Controller 0 */
+ 4, /* Serial Synchronous Controller 1 */
+ 4, /* Serial Synchronous Controller 2 */
0, /* Timer Counter 0 */
0, /* Timer Counter 1 */
0, /* Timer Counter 2 */
- 3, /* USB Host port */
+ 2, /* USB Host port */
3, /* LCD Controller */
0,
0,
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 64979a9023c2..245641263fce 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -13,6 +13,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -33,7 +34,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = 0xffffffffUL;
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
static struct at91_usbh_data usbh_data;
static struct resource usbh_resources[] = {
@@ -54,7 +55,7 @@ static struct platform_device at91sam9261_usbh_device = {
.id = -1,
.dev = {
.dma_mask = &ohci_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &usbh_data,
},
.resource = usbh_resources,
@@ -106,8 +107,6 @@ static struct platform_device at91sam9261_udc_device = {
void __init at91_add_device_udc(struct at91_udc_data *data)
{
- unsigned long x;
-
if (!data)
return;
@@ -116,9 +115,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
at91_set_deglitch(data->vbus_pin, 1);
}
- /* Pullup pin is handled internally */
- x = at91_sys_read(AT91_MATRIX_USBPUCR);
- at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON);
+ /* Pullup pin is handled internally by USB device peripheral */
udc_data = *data;
platform_device_register(&at91sam9261_udc_device);
@@ -132,7 +129,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc_data;
static struct resource mmc_resources[] = {
@@ -153,7 +150,7 @@ static struct platform_device at91sam9261_mmc_device = {
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc_data,
},
.resource = mmc_resources,
@@ -232,7 +229,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
return;
csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* set the bus interface characteristics */
at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
@@ -354,7 +351,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
* -------------------------------------------------------------------- */
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
+static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct resource spi0_resources[] = {
[0] = {
@@ -374,7 +371,7 @@ static struct platform_device at91sam9261_spi0_device = {
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi0_resources,
.num_resources = ARRAY_SIZE(spi0_resources),
@@ -400,7 +397,7 @@ static struct platform_device at91sam9261_spi1_device = {
.id = 1,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi1_resources,
.num_resources = ARRAY_SIZE(spi1_resources),
@@ -466,7 +463,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
* -------------------------------------------------------------------- */
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = 0xffffffffUL;
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
static struct atmel_lcdfb_info lcdc_data;
static struct resource lcdc_resources[] = {
@@ -494,7 +491,7 @@ static struct platform_device at91_lcdc_device = {
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &lcdc_data,
},
.resource = lcdc_resources,
@@ -507,6 +504,17 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
return;
}
+#if defined(CONFIG_FB_ATMEL_STN)
+ at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
+ at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* LCDD0 */
+ at91_set_A_periph(AT91_PIN_PB6, 0); /* LCDD1 */
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */
+#else
at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
@@ -529,6 +537,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */
at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
+#endif
lcdc_data = *data;
platform_device_register(&at91_lcdc_device);
@@ -539,24 +548,220 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
/* --------------------------------------------------------------------
- * LEDs
+ * RTT
+ * -------------------------------------------------------------------- */
+
+static struct resource rtt_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT,
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9261_rtt_device = {
+ .name = "at91_rtt",
+ .id = -1,
+ .resource = rtt_resources,
+ .num_resources = ARRAY_SIZE(rtt_resources),
+};
+
+static void __init at91_add_device_rtt(void)
+{
+ platform_device_register(&at91sam9261_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91sam9261_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at91sam9261_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SSC -- Synchronous Serial Controller
* -------------------------------------------------------------------- */
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_SSC0,
+ .end = AT91SAM9261_BASE_SSC0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_SSC0,
+ .end = AT91SAM9261_ID_SSC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_ssc0_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc0_resources,
+ .num_resources = ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB21, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB22, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB23, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB24, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB25, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB26, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_SSC1,
+ .end = AT91SAM9261_BASE_SSC1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_SSC1,
+ .end = AT91SAM9261_ID_SSC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_ssc1_device = {
+ .name = "ssc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ssc1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc1_resources,
+ .num_resources = ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_B_periph(AT91_PIN_PA17, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_B_periph(AT91_PIN_PA18, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_B_periph(AT91_PIN_PA19, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_B_periph(AT91_PIN_PA20, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_B_periph(AT91_PIN_PA21, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_B_periph(AT91_PIN_PA22, 1);
+}
+
+static u64 ssc2_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc2_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_SSC2,
+ .end = AT91SAM9261_BASE_SSC2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_SSC2,
+ .end = AT91SAM9261_ID_SSC2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_ssc2_device = {
+ .name = "ssc",
+ .id = 2,
+ .dev = {
+ .dma_mask = &ssc2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc2_resources,
+ .num_resources = ARRAY_SIZE(ssc2_resources),
+};
+
+static inline void configure_ssc2_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_B_periph(AT91_PIN_PC25, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_B_periph(AT91_PIN_PC26, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_B_periph(AT91_PIN_PC27, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_B_periph(AT91_PIN_PC28, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_B_periph(AT91_PIN_PC29, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_B_periph(AT91_PIN_PC30, 1);
+}
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
{
- /* Enable GPIO to access the LEDs */
- at91_set_gpio_output(cpu_led, 1);
- at91_set_gpio_output(timer_led, 1);
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91SAM9261_ID_SSC0:
+ pdev = &at91sam9261_ssc0_device;
+ configure_ssc0_pins(pins);
+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
+ break;
+ case AT91SAM9261_ID_SSC1:
+ pdev = &at91sam9261_ssc1_device;
+ configure_ssc1_pins(pins);
+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
+ break;
+ case AT91SAM9261_ID_SSC2:
+ pdev = &at91sam9261_ssc2_device;
+ configure_ssc2_pins(pins);
+ at91_clock_associate("ssc2_clk", &pdev->dev, "pclk");
+ break;
+ default:
+ return;
+ }
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
+ platform_device_register(pdev);
}
+
#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#endif
@@ -584,12 +789,15 @@ static struct atmel_uart_data dbgu_data = {
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9261_dbgu_device = {
.name = "atmel_usart",
.id = 0,
.dev = {
- .platform_data = &dbgu_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
},
.resource = dbgu_resources,
.num_resources = ARRAY_SIZE(dbgu_resources),
@@ -619,23 +827,29 @@ static struct atmel_uart_data uart0_data = {
.use_dma_rx = 1,
};
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9261_uart0_device = {
.name = "atmel_usart",
.id = 1,
.dev = {
- .platform_data = &uart0_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
},
.resource = uart0_resources,
.num_resources = ARRAY_SIZE(uart0_resources),
};
-static inline void configure_usart0_pins(void)
+static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
- at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */
- at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */
}
static struct resource uart1_resources[] = {
@@ -656,21 +870,29 @@ static struct atmel_uart_data uart1_data = {
.use_dma_rx = 1,
};
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9261_uart1_device = {
.name = "atmel_usart",
.id = 2,
.dev = {
- .platform_data = &uart1_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
},
.resource = uart1_resources,
.num_resources = ARRAY_SIZE(uart1_resources),
};
-static inline void configure_usart1_pins(void)
+static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PA12, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PA13, 0); /* CTS1 */
}
static struct resource uart2_resources[] = {
@@ -691,27 +913,35 @@ static struct atmel_uart_data uart2_data = {
.use_dma_rx = 1,
};
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9261_uart2_device = {
.name = "atmel_usart",
.id = 3,
.dev = {
- .platform_data = &uart2_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
},
.resource = uart2_resources,
.num_resources = ARRAY_SIZE(uart2_resources),
};
-static inline void configure_usart2_pins(void)
+static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PA15, 0); /* RTS2*/
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */
}
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
-void __init at91_init_serial(struct at91_uart_config *config)
+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
{
int i;
@@ -719,17 +949,17 @@ void __init at91_init_serial(struct at91_uart_config *config)
for (i = 0; i < config->nr_tty; i++) {
switch (config->tty_map[i]) {
case 0:
- configure_usart0_pins();
+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91sam9261_uart0_device;
at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart");
break;
case 1:
- configure_usart1_pins();
+ configure_usart1_pins(0);
at91_uarts[i] = &at91sam9261_uart1_device;
at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart");
break;
case 2:
- configure_usart2_pins();
+ configure_usart2_pins(0);
at91_uarts[i] = &at91sam9261_uart2_device;
at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart");
break;
@@ -751,6 +981,48 @@ void __init at91_init_serial(struct at91_uart_config *config)
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91sam9261_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91SAM9261_ID_US0:
+ pdev = &at91sam9261_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9261_ID_US1:
+ pdev = &at91sam9261_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9261_ID_US2:
+ pdev = &at91sam9261_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
void __init at91_add_device_serial(void)
{
int i;
@@ -761,7 +1033,9 @@ void __init at91_add_device_serial(void)
}
}
#else
-void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
@@ -774,6 +1048,8 @@ void __init at91_add_device_serial(void) {}
*/
static int __init at91_add_standard_devices(void)
{
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
return 0;
}
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 00e27b177857..a53ba0f74351 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -304,34 +304,34 @@ void __init at91sam9263_initialize(unsigned long main_clock)
static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller (FIQ) */
7, /* System Peripherals */
- 0, /* Parallel IO Controller A */
- 0, /* Parallel IO Controller B */
- 0, /* Parallel IO Controller C, D and E */
+ 1, /* Parallel IO Controller A */
+ 1, /* Parallel IO Controller B */
+ 1, /* Parallel IO Controller C, D and E */
0,
0,
- 6, /* USART 0 */
- 6, /* USART 1 */
- 6, /* USART 2 */
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
0, /* Multimedia Card Interface 0 */
0, /* Multimedia Card Interface 1 */
- 4, /* CAN */
- 0, /* Two-Wire Interface */
- 6, /* Serial Peripheral Interface 0 */
- 6, /* Serial Peripheral Interface 1 */
- 5, /* Serial Synchronous Controller 0 */
- 5, /* Serial Synchronous Controller 1 */
- 6, /* AC97 Controller */
+ 3, /* CAN */
+ 6, /* Two-Wire Interface */
+ 5, /* Serial Peripheral Interface 0 */
+ 5, /* Serial Peripheral Interface 1 */
+ 4, /* Serial Synchronous Controller 0 */
+ 4, /* Serial Synchronous Controller 1 */
+ 5, /* AC97 Controller */
0, /* Timer Counter 0, 1 and 2 */
0, /* Pulse Width Modulation Controller */
3, /* Ethernet */
0,
0, /* 2D Graphic Engine */
- 3, /* USB Device Port */
+ 2, /* USB Device Port */
0, /* Image Sensor Interface */
3, /* LDC Controller */
0, /* DMA Controller */
0,
- 3, /* USB Host port */
+ 2, /* USB Host port */
0, /* Advanced Interrupt Controller (IRQ0) */
0, /* Advanced Interrupt Controller (IRQ1) */
};
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index ac329a98e959..0b12e1adcc8e 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -12,6 +12,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -32,7 +33,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = 0xffffffffUL;
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
static struct at91_usbh_data usbh_data;
static struct resource usbh_resources[] = {
@@ -53,7 +54,7 @@ static struct platform_device at91_usbh_device = {
.id = -1,
.dev = {
.dma_mask = &ohci_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &usbh_data,
},
.resource = usbh_resources,
@@ -136,7 +137,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
* -------------------------------------------------------------------- */
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = 0xffffffffUL;
+static u64 eth_dmamask = DMA_BIT_MASK(32);
static struct at91_eth_data eth_data;
static struct resource eth_resources[] = {
@@ -157,7 +158,7 @@ static struct platform_device at91sam9263_eth_device = {
.id = -1,
.dev = {
.dma_mask = &eth_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &eth_data,
},
.resource = eth_resources,
@@ -210,7 +211,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data) {}
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc0_data, mmc1_data;
static struct resource mmc0_resources[] = {
@@ -231,7 +232,7 @@ static struct platform_device at91sam9263_mmc0_device = {
.id = 0,
.dev = {
.dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc0_data,
},
.resource = mmc0_resources,
@@ -256,7 +257,7 @@ static struct platform_device at91sam9263_mmc1_device = {
.id = 1,
.dev = {
.dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc1_data,
},
.resource = mmc1_resources,
@@ -382,7 +383,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
return;
csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
- at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC);
+ at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
/* set the bus interface characteristics */
at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
@@ -500,7 +501,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
* -------------------------------------------------------------------- */
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
+static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct resource spi0_resources[] = {
[0] = {
@@ -520,7 +521,7 @@ static struct platform_device at91sam9263_spi0_device = {
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi0_resources,
.num_resources = ARRAY_SIZE(spi0_resources),
@@ -546,7 +547,7 @@ static struct platform_device at91sam9263_spi1_device = {
.id = 1,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi1_resources,
.num_resources = ARRAY_SIZE(spi1_resources),
@@ -612,7 +613,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
* -------------------------------------------------------------------- */
#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
-static u64 ac97_dmamask = 0xffffffffUL;
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
static struct atmel_ac97_data ac97_data;
static struct resource ac97_resources[] = {
@@ -633,7 +634,7 @@ static struct platform_device at91sam9263_ac97_device = {
.id = 1,
.dev = {
.dma_mask = &ac97_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &ac97_data,
},
.resource = ac97_resources,
@@ -667,7 +668,7 @@ void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
* -------------------------------------------------------------------- */
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = 0xffffffffUL;
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
static struct atmel_lcdfb_info lcdc_data;
static struct resource lcdc_resources[] = {
@@ -688,7 +689,7 @@ static struct platform_device at91_lcdc_device = {
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &lcdc_data,
},
.resource = lcdc_resources,
@@ -732,24 +733,242 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
/* --------------------------------------------------------------------
- * LEDs
+ * Image Sensor Interface
* -------------------------------------------------------------------- */
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
+#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+struct resource isi_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_ISI,
+ .end = AT91SAM9263_BASE_ISI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_ISI,
+ .end = AT91SAM9263_ID_ISI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_isi_device = {
+ .name = "at91_isi",
+ .id = -1,
+ .resource = isi_resources,
+ .num_resources = ARRAY_SIZE(isi_resources),
+};
+
+void __init at91_add_device_isi(void)
+{
+ at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */
+ at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */
+ at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */
+ at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */
+ at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */
+ at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */
+ at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */
+ at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */
+ at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */
+ at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */
+ at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */
+ at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
+ at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */
+ at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */
+ at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */
+ at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */
+}
+#else
+void __init at91_add_device_isi(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * RTT
+ * -------------------------------------------------------------------- */
+
+static struct resource rtt0_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT0,
+ .end = AT91_BASE_SYS + AT91_RTT0 + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9263_rtt0_device = {
+ .name = "at91_rtt",
+ .id = 0,
+ .resource = rtt0_resources,
+ .num_resources = ARRAY_SIZE(rtt0_resources),
+};
+
+static struct resource rtt1_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT1,
+ .end = AT91_BASE_SYS + AT91_RTT1 + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9263_rtt1_device = {
+ .name = "at91_rtt",
+ .id = 1,
+ .resource = rtt1_resources,
+ .num_resources = ARRAY_SIZE(rtt1_resources),
+};
+
+static void __init at91_add_device_rtt(void)
+{
+ platform_device_register(&at91sam9263_rtt0_device);
+ platform_device_register(&at91sam9263_rtt1_device);
+}
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91sam9263_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at91sam9263_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_SSC0,
+ .end = AT91SAM9263_BASE_SSC0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_SSC0,
+ .end = AT91SAM9263_ID_SSC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_ssc0_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc0_resources,
+ .num_resources = ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_B_periph(AT91_PIN_PB0, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_B_periph(AT91_PIN_PB1, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_B_periph(AT91_PIN_PB2, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_B_periph(AT91_PIN_PB3, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_B_periph(AT91_PIN_PB4, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_B_periph(AT91_PIN_PB5, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_SSC1,
+ .end = AT91SAM9263_BASE_SSC1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_SSC1,
+ .end = AT91SAM9263_ID_SSC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_ssc1_device = {
+ .name = "ssc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ssc1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc1_resources,
+ .num_resources = ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB6, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB7, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB8, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB9, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB10, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB11, 1);
+}
+
+/*
+ * Return the device node so that board init code can use it as the
+ * parent for the device node reflecting how it's used on this board.
+ *
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
{
- /* Enable GPIO to access the LEDs */
- at91_set_gpio_output(cpu_led, 1);
- at91_set_gpio_output(timer_led, 1);
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91SAM9263_ID_SSC0:
+ pdev = &at91sam9263_ssc0_device;
+ configure_ssc0_pins(pins);
+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
+ break;
+ case AT91SAM9263_ID_SSC1:
+ pdev = &at91sam9263_ssc1_device;
+ configure_ssc1_pins(pins);
+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
+ break;
+ default:
+ return;
+ }
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
+ platform_device_register(pdev);
}
+
#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#endif
@@ -778,12 +997,15 @@ static struct atmel_uart_data dbgu_data = {
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9263_dbgu_device = {
.name = "atmel_usart",
.id = 0,
.dev = {
- .platform_data = &dbgu_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
},
.resource = dbgu_resources,
.num_resources = ARRAY_SIZE(dbgu_resources),
@@ -813,23 +1035,29 @@ static struct atmel_uart_data uart0_data = {
.use_dma_rx = 1,
};
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9263_uart0_device = {
.name = "atmel_usart",
.id = 1,
.dev = {
- .platform_data = &uart0_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
},
.resource = uart0_resources,
.num_resources = ARRAY_SIZE(uart0_resources),
};
-static inline void configure_usart0_pins(void)
+static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
- at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
- at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
}
static struct resource uart1_resources[] = {
@@ -850,23 +1078,29 @@ static struct atmel_uart_data uart1_data = {
.use_dma_rx = 1,
};
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9263_uart1_device = {
.name = "atmel_usart",
.id = 2,
.dev = {
- .platform_data = &uart1_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
},
.resource = uart1_resources,
.num_resources = ARRAY_SIZE(uart1_resources),
};
-static inline void configure_usart1_pins(void)
+static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
- at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
- at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
}
static struct resource uart2_resources[] = {
@@ -887,29 +1121,35 @@ static struct atmel_uart_data uart2_data = {
.use_dma_rx = 1,
};
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9263_uart2_device = {
.name = "atmel_usart",
.id = 3,
.dev = {
- .platform_data = &uart2_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
},
.resource = uart2_resources,
.num_resources = ARRAY_SIZE(uart2_resources),
};
-static inline void configure_usart2_pins(void)
+static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
- at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
- at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
}
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
-void __init at91_init_serial(struct at91_uart_config *config)
+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
{
int i;
@@ -917,17 +1157,17 @@ void __init at91_init_serial(struct at91_uart_config *config)
for (i = 0; i < config->nr_tty; i++) {
switch (config->tty_map[i]) {
case 0:
- configure_usart0_pins();
+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91sam9263_uart0_device;
at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart");
break;
case 1:
- configure_usart1_pins();
+ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91sam9263_uart1_device;
at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart");
break;
case 2:
- configure_usart2_pins();
+ configure_usart2_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91sam9263_uart2_device;
at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart");
break;
@@ -949,6 +1189,48 @@ void __init at91_init_serial(struct at91_uart_config *config)
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91sam9263_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91SAM9263_ID_US0:
+ pdev = &at91sam9263_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9263_ID_US1:
+ pdev = &at91sam9263_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9263_ID_US2:
+ pdev = &at91sam9263_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
void __init at91_add_device_serial(void)
{
int i;
@@ -960,6 +1242,8 @@ void __init at91_add_device_serial(void)
}
#else
void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
@@ -971,6 +1255,8 @@ void __init at91_add_device_serial(void) {}
*/
static int __init at91_add_standard_devices(void)
{
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
return 0;
}
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 5c090c9442f5..e38d23770992 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -49,8 +49,6 @@ static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id)
volatile long nr_ticks;
if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) { /* This is a shared interrupt */
- write_seqlock(&xtime_lock);
-
/* Get number to ticks performed before interrupt and clear PIT interrupt */
nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
do {
@@ -58,7 +56,6 @@ static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id)
nr_ticks--;
} while (nr_ticks);
- write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
} else
return IRQ_NONE; /* not handled */
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 2bd60a3dc623..f43b5c33e45d 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -9,6 +9,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -29,7 +30,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc_data;
static struct resource mmc_resources[] = {
@@ -50,7 +51,7 @@ static struct platform_device at91sam9rl_mmc_device = {
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc_data,
},
.resource = mmc_resources,
@@ -247,7 +248,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
* -------------------------------------------------------------------- */
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
+static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct resource spi_resources[] = {
[0] = {
@@ -267,7 +268,7 @@ static struct platform_device at91sam9rl_spi_device = {
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi_resources,
.num_resources = ARRAY_SIZE(spi_resources),
@@ -312,7 +313,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
* -------------------------------------------------------------------- */
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = 0xffffffffUL;
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
static struct atmel_lcdfb_info lcdc_data;
static struct resource lcdc_resources[] = {
@@ -340,7 +341,7 @@ static struct platform_device at91_lcdc_device = {
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &lcdc_data,
},
.resource = lcdc_resources,
@@ -384,24 +385,196 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
/* --------------------------------------------------------------------
- * LEDs
+ * RTC
* -------------------------------------------------------------------- */
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
+#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
+static struct platform_device at91sam9rl_rtc_device = {
+ .name = "at91_rtc",
+ .id = -1,
+ .num_resources = 0,
+};
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+static void __init at91_add_device_rtc(void)
{
- /* Enable GPIO to access the LEDs */
- at91_set_gpio_output(cpu_led, 1);
- at91_set_gpio_output(timer_led, 1);
+ platform_device_register(&at91sam9rl_rtc_device);
+}
+#else
+static void __init at91_add_device_rtc(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * RTT
+ * -------------------------------------------------------------------- */
+
+static struct resource rtt_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT,
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9rl_rtt_device = {
+ .name = "at91_rtt",
+ .id = -1,
+ .resource = rtt_resources,
+ .num_resources = ARRAY_SIZE(rtt_resources),
+};
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
+static void __init at91_add_device_rtt(void)
+{
+ platform_device_register(&at91sam9rl_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91sam9rl_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at91sam9rl_wdt_device);
}
#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_SSC0,
+ .end = AT91SAM9RL_BASE_SSC0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_SSC0,
+ .end = AT91SAM9RL_ID_SSC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9rl_ssc0_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc0_resources,
+ .num_resources = ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PC0, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PC1, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PA15, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PA16, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_B_periph(AT91_PIN_PA10, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_B_periph(AT91_PIN_PA22, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_SSC1,
+ .end = AT91SAM9RL_BASE_SSC1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_SSC1,
+ .end = AT91SAM9RL_ID_SSC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9rl_ssc1_device = {
+ .name = "ssc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ssc1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc1_resources,
+ .num_resources = ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_B_periph(AT91_PIN_PA29, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_B_periph(AT91_PIN_PA30, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_B_periph(AT91_PIN_PA13, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_B_periph(AT91_PIN_PA14, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_B_periph(AT91_PIN_PA9, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_B_periph(AT91_PIN_PA8, 1);
+}
+
+/*
+ * Return the device node so that board init code can use it as the
+ * parent for the device node reflecting how it's used on this board.
+ *
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91SAM9RL_ID_SSC0:
+ pdev = &at91sam9rl_ssc0_device;
+ configure_ssc0_pins(pins);
+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
+ break;
+ case AT91SAM9RL_ID_SSC1:
+ pdev = &at91sam9rl_ssc1_device;
+ configure_ssc1_pins(pins);
+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
+ break;
+ default:
+ return;
+ }
+
+ platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#endif
@@ -429,12 +602,15 @@ static struct atmel_uart_data dbgu_data = {
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9rl_dbgu_device = {
.name = "atmel_usart",
.id = 0,
.dev = {
- .platform_data = &dbgu_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
},
.resource = dbgu_resources,
.num_resources = ARRAY_SIZE(dbgu_resources),
@@ -464,23 +640,37 @@ static struct atmel_uart_data uart0_data = {
.use_dma_rx = 1,
};
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9rl_uart0_device = {
.name = "atmel_usart",
.id = 1,
.dev = {
- .platform_data = &uart0_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
},
.resource = uart0_resources,
.num_resources = ARRAY_SIZE(uart0_resources),
};
-static inline void configure_usart0_pins(void)
+static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
- at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */
- at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */
+ if (pins & ATMEL_UART_DSR)
+ at91_set_A_periph(AT91_PIN_PD14, 0); /* DSR0 */
+ if (pins & ATMEL_UART_DTR)
+ at91_set_A_periph(AT91_PIN_PD15, 0); /* DTR0 */
+ if (pins & ATMEL_UART_DCD)
+ at91_set_A_periph(AT91_PIN_PD16, 0); /* DCD0 */
+ if (pins & ATMEL_UART_RI)
+ at91_set_A_periph(AT91_PIN_PD17, 0); /* RI0 */
}
static struct resource uart1_resources[] = {
@@ -501,21 +691,29 @@ static struct atmel_uart_data uart1_data = {
.use_dma_rx = 1,
};
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9rl_uart1_device = {
.name = "atmel_usart",
.id = 2,
.dev = {
- .platform_data = &uart1_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
},
.resource = uart1_resources,
.num_resources = ARRAY_SIZE(uart1_resources),
};
-static inline void configure_usart1_pins(void)
+static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PA18, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PA19, 0); /* CTS1 */
}
static struct resource uart2_resources[] = {
@@ -536,21 +734,29 @@ static struct atmel_uart_data uart2_data = {
.use_dma_rx = 1,
};
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9rl_uart2_device = {
.name = "atmel_usart",
.id = 3,
.dev = {
- .platform_data = &uart2_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
},
.resource = uart2_resources,
.num_resources = ARRAY_SIZE(uart2_resources),
};
-static inline void configure_usart2_pins(void)
+static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PA29, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA30, 0); /* CTS2 */
}
static struct resource uart3_resources[] = {
@@ -571,27 +777,35 @@ static struct atmel_uart_data uart3_data = {
.use_dma_rx = 1,
};
+static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9rl_uart3_device = {
.name = "atmel_usart",
.id = 4,
.dev = {
- .platform_data = &uart3_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart3_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart3_data,
},
.resource = uart3_resources,
.num_resources = ARRAY_SIZE(uart3_resources),
};
-static inline void configure_usart3_pins(void)
+static inline void configure_usart3_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB0, 1); /* TXD3 */
at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PD4, 0); /* RTS3 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */
}
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
-void __init at91_init_serial(struct at91_uart_config *config)
+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
{
int i;
@@ -599,22 +813,22 @@ void __init at91_init_serial(struct at91_uart_config *config)
for (i = 0; i < config->nr_tty; i++) {
switch (config->tty_map[i]) {
case 0:
- configure_usart0_pins();
+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91sam9rl_uart0_device;
at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart");
break;
case 1:
- configure_usart1_pins();
+ configure_usart1_pins(0);
at91_uarts[i] = &at91sam9rl_uart1_device;
at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart");
break;
case 2:
- configure_usart2_pins();
+ configure_usart2_pins(0);
at91_uarts[i] = &at91sam9rl_uart2_device;
at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart");
break;
case 3:
- configure_usart3_pins();
+ configure_usart3_pins(0);
at91_uarts[i] = &at91sam9rl_uart3_device;
at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart");
break;
@@ -636,6 +850,53 @@ void __init at91_init_serial(struct at91_uart_config *config)
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91sam9rl_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91SAM9RL_ID_US0:
+ pdev = &at91sam9rl_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9RL_ID_US1:
+ pdev = &at91sam9rl_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9RL_ID_US2:
+ pdev = &at91sam9rl_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9RL_ID_US3:
+ pdev = &at91sam9rl_uart3_device;
+ configure_usart3_pins(pins);
+ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
void __init at91_add_device_serial(void)
{
int i;
@@ -646,7 +907,9 @@ void __init at91_add_device_serial(void)
}
}
#else
-void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
@@ -659,6 +922,9 @@ void __init at91_add_device_serial(void) {}
*/
static int __init at91_add_standard_devices(void)
{
+ at91_add_device_rtc();
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
return 0;
}
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
new file mode 100644
index 000000000000..185437131541
--- /dev/null
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -0,0 +1,359 @@
+/*
+ * linux/arch/arm/mach-at91/board-cap9adk.c
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/fb.h>
+#include <linux/mtd/physmap.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91cap9_matrix.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+static void __init cap9adk_map_io(void)
+{
+ /* Initialize processor: 12 MHz crystal */
+ at91cap9_initialize(12000000);
+
+ /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */
+ at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11);
+ /* ... POWER LED always on */
+ at91_set_gpio_output(AT91_PIN_PC29, 1);
+
+ /* Setup the serial ports and console */
+ at91_register_uart(0, 0, 0); /* DBGU = ttyS0 */
+ at91_set_serial_console(0);
+}
+
+static void __init cap9adk_init_irq(void)
+{
+ at91cap9_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata cap9adk_usbh_data = {
+ .ports = 2,
+};
+
+
+/*
+ * ADS7846 Touchscreen
+ */
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+static int ads7843_pendown_state(void)
+{
+ return !at91_get_gpio_value(AT91_PIN_PC4); /* Touchscreen PENIRQ */
+}
+
+static struct ads7846_platform_data ads_info = {
+ .model = 7843,
+ .x_min = 150,
+ .x_max = 3830,
+ .y_min = 190,
+ .y_max = 3830,
+ .vref_delay_usecs = 100,
+ .x_plate_ohms = 450,
+ .y_plate_ohms = 250,
+ .pressure_max = 15000,
+ .debounce_max = 1,
+ .debounce_rep = 0,
+ .debounce_tol = (~0),
+ .get_pendown_state = ads7843_pendown_state,
+};
+
+static void __init cap9adk_add_device_ts(void)
+{
+ at91_set_gpio_input(AT91_PIN_PC4, 1); /* Touchscreen PENIRQ */
+ at91_set_gpio_input(AT91_PIN_PC5, 1); /* Touchscreen BUSY */
+}
+#else
+static void __init cap9adk_add_device_ts(void) {}
+#endif
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info cap9adk_spi_devices[] = {
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+ { /* DataFlash card */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#endif
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+ {
+ .modalias = "ads7846",
+ .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */
+ .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
+ .bus_num = 0,
+ .platform_data = &ads_info,
+ .irq = AT91_PIN_PC4,
+ },
+#endif
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata cap9adk_mmc_data = {
+ .wire4 = 1,
+// .det_pin = ... not connected
+// .wp_pin = ... not connected
+// .vcc_pin = ... not connected
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata cap9adk_macb_data = {
+ .is_rmii = 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
+ {
+ .name = "NAND partition",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(cap9adk_nand_partitions);
+ return cap9adk_nand_partitions;
+}
+
+static struct at91_nand_data __initdata cap9adk_nand_data = {
+ .ale = 21,
+ .cle = 22,
+// .det_pin = ... not connected
+// .rdy_pin = ... not connected
+ .enable_pin = AT91_PIN_PD15,
+ .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+};
+
+
+/*
+ * NOR flash
+ */
+static struct mtd_partition cap9adk_nor_partitions[] = {
+ {
+ .name = "NOR partition",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data cap9adk_nor_data = {
+ .width = 2,
+ .parts = cap9adk_nor_partitions,
+ .nr_parts = ARRAY_SIZE(cap9adk_nor_partitions),
+};
+
+#define NOR_BASE AT91_CHIPSELECT_0
+#define NOR_SIZE 0x800000
+
+static struct resource nor_flash_resources[] = {
+ {
+ .start = NOR_BASE,
+ .end = NOR_BASE + NOR_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device cap9adk_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &cap9adk_nor_data,
+ },
+ .resource = nor_flash_resources,
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+};
+
+static __init void cap9adk_add_device_nor(void)
+{
+ unsigned long csa;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(0), AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2)
+ | AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2));
+
+ at91_sys_write(AT91_SMC_PULSE(0), AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10)
+ | AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10));
+
+ at91_sys_write(AT91_SMC_CYCLE(0), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
+
+ at91_sys_write(AT91_SMC_MODE(0), AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+ | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
+ | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
+
+ platform_device_register(&cap9adk_nor_flash);
+}
+
+
+/*
+ * LCD Controller
+ */
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static struct fb_videomode at91_tft_vga_modes[] = {
+ {
+ .name = "TX09D50VM1CCA @ 60",
+ .refresh = 60,
+ .xres = 240, .yres = 320,
+ .pixclock = KHZ2PICOS(4965),
+
+ .left_margin = 1, .right_margin = 33,
+ .upper_margin = 1, .lower_margin = 0,
+ .hsync_len = 5, .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+};
+
+static struct fb_monspecs at91fb_default_monspecs = {
+ .manufacturer = "HIT",
+ .monitor = "TX09D70VM1CCA",
+
+ .modedb = at91_tft_vga_modes,
+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
+ .hfmin = 15000,
+ .hfmax = 64000,
+ .vfmin = 50,
+ .vfmax = 150,
+};
+
+#define AT91CAP9_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
+ | ATMEL_LCDC_DISTYPE_TFT \
+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
+
+static void at91_lcdc_power_control(int on)
+{
+ if (on)
+ at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */
+ else
+ at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */
+}
+
+/* Driver datas */
+static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data = {
+ .default_bpp = 16,
+ .default_dmacon = ATMEL_LCDC_DMAEN,
+ .default_lcdcon2 = AT91CAP9_DEFAULT_LCDCON2,
+ .default_monspecs = &at91fb_default_monspecs,
+ .atmel_lcdfb_power_control = at91_lcdc_power_control,
+ .guard_time = 1,
+};
+
+#else
+static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data;
+#endif
+
+
+/*
+ * AC97
+ */
+static struct atmel_ac97_data cap9adk_ac97_data = {
+// .reset_pin = ... not connected
+};
+
+
+static void __init cap9adk_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH);
+ at91_add_device_usbh(&cap9adk_usbh_data);
+ /* SPI */
+ at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
+ /* Touchscreen */
+ cap9adk_add_device_ts();
+ /* MMC */
+ at91_add_device_mmc(1, &cap9adk_mmc_data);
+ /* Ethernet */
+ at91_add_device_eth(&cap9adk_macb_data);
+ /* NAND */
+ at91_add_device_nand(&cap9adk_nand_data);
+ /* NOR Flash */
+ cap9adk_add_device_nor();
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* LCD Controller */
+ set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH);
+ at91_add_device_lcdc(&cap9adk_lcdc_data);
+ /* AC97 */
+ at91_add_device_ac97(&cap9adk_ac97_data);
+}
+
+MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
+ /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = cap9adk_map_io,
+ .init_irq = cap9adk_init_irq,
+ .init_machine = cap9adk_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index d0aa20c9383e..0e2a11fc5bbd 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -25,6 +25,8 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
#include <asm/hardware.h>
#include <asm/setup.h>
@@ -156,6 +158,85 @@ static struct platform_device csb_flash = {
.num_resources = ARRAY_SIZE(csb_flash_resources),
};
+/*
+ * GPIO Buttons (on CSB300)
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button csb300_buttons[] = {
+ {
+ .gpio = AT91_PIN_PB29,
+ .code = BTN_0,
+ .desc = "sw0",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+ {
+ .gpio = AT91_PIN_PB28,
+ .code = BTN_1,
+ .desc = "sw1",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+ {
+ .gpio = AT91_PIN_PA21,
+ .code = BTN_2,
+ .desc = "sw2",
+ .active_low = 1,
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data csb300_button_data = {
+ .buttons = csb300_buttons,
+ .nbuttons = ARRAY_SIZE(csb300_buttons),
+};
+
+static struct platform_device csb300_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &csb300_button_data,
+ }
+};
+
+static void __init csb300_add_device_buttons(void)
+{
+ at91_set_gpio_input(AT91_PIN_PB29, 0); /* sw0 */
+ at91_set_deglitch(AT91_PIN_PB29, 1);
+ at91_set_gpio_input(AT91_PIN_PB28, 0); /* sw1 */
+ at91_set_deglitch(AT91_PIN_PB28, 1);
+ at91_set_gpio_input(AT91_PIN_PA21, 0); /* sw2 */
+ at91_set_deglitch(AT91_PIN_PA21, 1);
+
+ platform_device_register(&csb300_button_device);
+}
+#else
+static void __init csb300_add_device_buttons(void) {}
+#endif
+
+static struct gpio_led csb_leds[] = {
+ { /* "led0", yellow */
+ .name = "led0",
+ .gpio = AT91_PIN_PB2,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* "led1", green */
+ .name = "led1",
+ .gpio = AT91_PIN_PB1,
+ .active_low = 1,
+ .default_trigger = "mmc0",
+ },
+ { /* "led2", yellow */
+ .name = "led2",
+ .gpio = AT91_PIN_PB0,
+ .active_low = 1,
+ .default_trigger = "ide-disk",
+ },
+};
+
+
static void __init csb337_board_init(void)
{
/* Serial */
@@ -177,6 +258,10 @@ static void __init csb337_board_init(void)
at91_add_device_mmc(0, &csb337_mmc_data);
/* NOR flash */
platform_device_register(&csb_flash);
+ /* LEDs */
+ at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
+ /* Switches on CSB300 */
+ csb300_add_device_buttons();
}
MACHINE_START(CSB337, "Cogent CSB337")
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index 40c9e4331706..0a897efeba8e 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -183,6 +183,14 @@ static struct platform_device dk_flash = {
.num_resources = 1,
};
+static struct gpio_led dk_leds[] = {
+ {
+ .name = "led0",
+ .gpio = AT91_PIN_PB2,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ }
+};
static void __init dk_board_init(void)
{
@@ -213,6 +221,8 @@ static void __init dk_board_init(void)
at91_add_device_nand(&dk_nand_data);
/* NOR Flash */
platform_device_register(&dk_flash);
+ /* LEDs */
+ at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
/* VGA */
// dk_add_device_video();
}
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index d05b1b2be9fb..0574e50a30dd 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -109,6 +109,15 @@ static struct spi_board_info ek_spi_devices[] = {
#endif
};
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("ics1523", 0x26),
+ },
+ {
+ I2C_BOARD_INFO("dac3550", 0x4d),
+ }
+};
+
#define EK_FLASH_BASE AT91_CHIPSELECT_0
#define EK_FLASH_SIZE 0x200000
@@ -132,6 +141,25 @@ static struct platform_device ek_flash = {
.num_resources = 1,
};
+static struct gpio_led ek_leds[] = {
+ { /* "user led 1", DS2 */
+ .name = "green",
+ .gpio = AT91_PIN_PB0,
+ .active_low = 1,
+ .default_trigger = "mmc0",
+ },
+ { /* "user led 2", DS4 */
+ .name = "yellow",
+ .gpio = AT91_PIN_PB1,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* "user led 3", DS6 */
+ .name = "red",
+ .gpio = AT91_PIN_PB2,
+ .active_low = 1,
+ }
+};
static void __init ek_board_init(void)
{
@@ -158,6 +186,8 @@ static void __init ek_board_init(void)
#endif
/* NOR Flash */
platform_device_register(&ek_flash);
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* VGA */
// ek_add_device_video();
}
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 550ae59a3aca..aa29ea58ca09 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -280,6 +280,68 @@ static struct spi_board_info ek_spi_devices[] = {
* LCD Controller
*/
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+
+#if defined(CONFIG_FB_ATMEL_STN)
+
+/* STN */
+static struct fb_videomode at91_stn_modes[] = {
+ {
+ .name = "SP06Q002 @ 75",
+ .refresh = 75,
+ .xres = 320, .yres = 240,
+ .pixclock = KHZ2PICOS(1440),
+
+ .left_margin = 1, .right_margin = 1,
+ .upper_margin = 0, .lower_margin = 0,
+ .hsync_len = 1, .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+};
+
+static struct fb_monspecs at91fb_default_stn_monspecs = {
+ .manufacturer = "HIT",
+ .monitor = "SP06Q002",
+
+ .modedb = at91_stn_modes,
+ .modedb_len = ARRAY_SIZE(at91_stn_modes),
+ .hfmin = 15000,
+ .hfmax = 64000,
+ .vfmin = 50,
+ .vfmax = 150,
+};
+
+#define AT91SAM9261_DEFAULT_STN_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
+ | ATMEL_LCDC_DISTYPE_STNMONO \
+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE \
+ | ATMEL_LCDC_IFWIDTH_4 \
+ | ATMEL_LCDC_SCANMOD_SINGLE)
+
+static void at91_lcdc_stn_power_control(int on)
+{
+ /* backlight */
+ if (on) { /* power up */
+ at91_set_gpio_value(AT91_PIN_PC14, 0);
+ at91_set_gpio_value(AT91_PIN_PC15, 0);
+ } else { /* power down */
+ at91_set_gpio_value(AT91_PIN_PC14, 1);
+ at91_set_gpio_value(AT91_PIN_PC15, 1);
+ }
+}
+
+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+ .default_bpp = 1,
+ .default_dmacon = ATMEL_LCDC_DMAEN,
+ .default_lcdcon2 = AT91SAM9261_DEFAULT_STN_LCDCON2,
+ .default_monspecs = &at91fb_default_stn_monspecs,
+ .atmel_lcdfb_power_control = at91_lcdc_stn_power_control,
+ .guard_time = 1,
+};
+
+#else
+
+/* TFT */
static struct fb_videomode at91_tft_vga_modes[] = {
{
.name = "TX09D50VM1CCA @ 60",
@@ -296,7 +358,7 @@ static struct fb_videomode at91_tft_vga_modes[] = {
},
};
-static struct fb_monspecs at91fb_default_monspecs = {
+static struct fb_monspecs at91fb_default_tft_monspecs = {
.manufacturer = "HIT",
.monitor = "TX09D50VM1CCA",
@@ -308,11 +370,11 @@ static struct fb_monspecs at91fb_default_monspecs = {
.vfmax = 150,
};
-#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
+#define AT91SAM9261_DEFAULT_TFT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
| ATMEL_LCDC_DISTYPE_TFT \
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-static void at91_lcdc_power_control(int on)
+static void at91_lcdc_tft_power_control(int on)
{
if (on)
at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */
@@ -320,15 +382,15 @@ static void at91_lcdc_power_control(int on)
at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */
}
-/* Driver datas */
static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN,
- .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2,
- .default_monspecs = &at91fb_default_monspecs,
- .atmel_lcdfb_power_control = at91_lcdc_power_control,
+ .default_lcdcon2 = AT91SAM9261_DEFAULT_TFT_LCDCON2,
+ .default_monspecs = &at91fb_default_tft_monspecs,
+ .atmel_lcdfb_power_control = at91_lcdc_tft_power_control,
.guard_time = 1,
};
+#endif
#else
static struct atmel_lcdfb_info __initdata ek_lcdc_data;
@@ -342,25 +404,25 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
static struct gpio_keys_button ek_buttons[] = {
{
.gpio = AT91_PIN_PA27,
- .keycode = BTN_0,
+ .code = BTN_0,
.desc = "Button 0",
.active_low = 1,
},
{
.gpio = AT91_PIN_PA26,
- .keycode = BTN_1,
+ .code = BTN_1,
.desc = "Button 1",
.active_low = 1,
},
{
.gpio = AT91_PIN_PA25,
- .keycode = BTN_2,
+ .code = BTN_2,
.desc = "Button 2",
.active_low = 1,
},
{
.gpio = AT91_PIN_PA24,
- .keycode = BTN_3,
+ .code = BTN_3,
.desc = "Button 3",
.active_low = 1,
}
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index ab9dcc075454..f09347a86e71 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -27,6 +27,8 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/fb.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
#include <video/atmel_lcdc.h>
@@ -163,6 +165,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
* MACB Ethernet device
*/
static struct at91_eth_data __initdata ek_macb_data = {
+ .phy_irq_pin = AT91_PIN_PE31,
.is_rmii = 1,
};
@@ -264,6 +267,55 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ { /* BP1, "leftclic" */
+ .code = BTN_LEFT,
+ .gpio = AT91_PIN_PC5,
+ .active_low = 1,
+ .desc = "left_click",
+ .wakeup = 1,
+ },
+ { /* BP2, "rightclic" */
+ .code = BTN_RIGHT,
+ .gpio = AT91_PIN_PC4,
+ .active_low = 1,
+ .desc = "right_click",
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ at91_set_GPIO_periph(AT91_PIN_PC5, 0); /* left button */
+ at91_set_deglitch(AT91_PIN_PC5, 1);
+ at91_set_GPIO_periph(AT91_PIN_PC4, 0); /* right button */
+ at91_set_deglitch(AT91_PIN_PC4, 1);
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
+/*
* AC97
*/
static struct atmel_ac97_data ek_ac97_data = {
@@ -271,6 +323,30 @@ static struct atmel_ac97_data ek_ac97_data = {
};
+/*
+ * LEDs ... these could all be PWM-driven, for variable brightness
+ */
+static struct gpio_led ek_leds[] = {
+ { /* "left" led, green, userled1, pwm1 */
+ .name = "ds1",
+ .gpio = AT91_PIN_PB8,
+ .active_low = 1,
+ .default_trigger = "mmc0",
+ },
+ { /* "right" led, green, userled2, pwm2 */
+ .name = "ds2",
+ .gpio = AT91_PIN_PC29,
+ .active_low = 1,
+ .default_trigger = "nand-disk",
+ },
+ { /* "power" led, yellow, pwm0 */
+ .name = "ds3",
+ .gpio = AT91_PIN_PB7,
+ .default_trigger = "heartbeat",
+ },
+};
+
+
static void __init ek_board_init(void)
{
/* Serial */
@@ -294,8 +370,12 @@ static void __init ek_board_init(void)
at91_add_device_i2c(NULL, 0);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
+ /* Push Buttons */
+ ek_add_device_buttons();
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
}
MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 57c3b647ce83..ec76eeaafd45 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -574,6 +574,8 @@ int __init at91_clock_init(unsigned long main_clock)
} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+ } else if (cpu_is_at91cap9()) {
+ uhpck.pmc_mask = AT91CAP9_PMC_UHP;
}
at91_sys_write(AT91_CKGR_PLLBR, 0);
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 77d4c0a37842..7b9ce7a336b0 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -15,6 +15,7 @@ extern void __init at91sam9261_initialize(unsigned long main_clock);
extern void __init at91sam9263_initialize(unsigned long main_clock);
extern void __init at91sam9rl_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
+extern void __init at91cap9_initialize(unsigned long main_clock);
/* Interrupts */
extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
@@ -23,6 +24,7 @@ extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
+extern void __init at91cap9_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */
@@ -45,6 +47,9 @@ extern void at91_irq_resume(void);
#define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */
struct at91_gpio_bank {
+ unsigned chipbase; /* bank's first GPIO number */
+ void __iomem *regbase; /* base of register bank */
+ struct at91_gpio_bank *next; /* bank sharing same IRQ/clock/... */
unsigned short id; /* peripheral ID */
unsigned long offset; /* offset from system peripheral base */
struct clk *clock; /* associated clock */
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index aa2d365c93fb..f629c2b5f0c5 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -13,6 +13,8 @@
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/module.h>
@@ -31,12 +33,10 @@ static int gpio_banks;
static inline void __iomem *pin_to_controller(unsigned pin)
{
- void __iomem *sys_base = (void __iomem *) AT91_VA_BASE_SYS;
-
pin -= PIN_BASE;
pin /= 32;
if (likely(pin < gpio_banks))
- return sys_base + gpio[pin].offset;
+ return gpio[pin].regbase;
return NULL;
}
@@ -292,11 +292,11 @@ void at91_gpio_suspend(void)
int i;
for (i = 0; i < gpio_banks; i++) {
- u32 pio = gpio[i].offset;
+ void __iomem *pio = gpio[i].regbase;
- backups[i] = at91_sys_read(pio + PIO_IMR);
- at91_sys_write(pio + PIO_IDR, backups[i]);
- at91_sys_write(pio + PIO_IER, wakeups[i]);
+ backups[i] = __raw_readl(pio + PIO_IMR);
+ __raw_writel(backups[i], pio + PIO_IDR);
+ __raw_writel(wakeups[i], pio + PIO_IER);
if (!wakeups[i])
clk_disable(gpio[i].clock);
@@ -313,13 +313,13 @@ void at91_gpio_resume(void)
int i;
for (i = 0; i < gpio_banks; i++) {
- u32 pio = gpio[i].offset;
+ void __iomem *pio = gpio[i].regbase;
if (!wakeups[i])
clk_enable(gpio[i].clock);
- at91_sys_write(pio + PIO_IDR, wakeups[i]);
- at91_sys_write(pio + PIO_IER, backups[i]);
+ __raw_writel(wakeups[i], pio + PIO_IDR);
+ __raw_writel(backups[i], pio + PIO_IER);
}
}
@@ -359,7 +359,13 @@ static void gpio_irq_unmask(unsigned pin)
static int gpio_irq_type(unsigned pin, unsigned type)
{
- return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL;
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ case IRQ_TYPE_EDGE_BOTH:
+ return 0;
+ default:
+ return -EINVAL;
+ }
}
static struct irq_chip gpio_irqchip = {
@@ -374,20 +380,30 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
{
unsigned pin;
struct irq_desc *gpio;
+ struct at91_gpio_bank *bank;
void __iomem *pio;
u32 isr;
- pio = get_irq_chip_data(irq);
+ bank = get_irq_chip_data(irq);
+ pio = bank->regbase;
/* temporarily mask (level sensitive) parent IRQ */
desc->chip->ack(irq);
for (;;) {
- /* reading ISR acks the pending (edge triggered) GPIO interrupt */
+ /* Reading ISR acks pending (edge triggered) GPIO interrupts.
+ * When there none are pending, we're finished unless we need
+ * to process multiple banks (like ID_PIOCDE on sam9263).
+ */
isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
- if (!isr)
- break;
+ if (!isr) {
+ if (!bank->next)
+ break;
+ bank = bank->next;
+ pio = bank->regbase;
+ continue;
+ }
- pin = (unsigned) get_irq_data(irq);
+ pin = bank->chipbase;
gpio = &irq_desc[pin];
while (isr) {
@@ -414,29 +430,86 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
/*--------------------------------------------------------------------------*/
+#ifdef CONFIG_DEBUG_FS
+
+static int at91_gpio_show(struct seq_file *s, void *unused)
+{
+ int bank, j;
+
+ /* print heading */
+ seq_printf(s, "Pin\t");
+ for (bank = 0; bank < gpio_banks; bank++) {
+ seq_printf(s, "PIO%c\t", 'A' + bank);
+ };
+ seq_printf(s, "\n\n");
+
+ /* print pin status */
+ for (j = 0; j < 32; j++) {
+ seq_printf(s, "%i:\t", j);
+
+ for (bank = 0; bank < gpio_banks; bank++) {
+ unsigned pin = PIN_BASE + (32 * bank) + j;
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (__raw_readl(pio + PIO_PSR) & mask)
+ seq_printf(s, "GPIO:%s", __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0");
+ else
+ seq_printf(s, "%s", __raw_readl(pio + PIO_ABSR) & mask ? "B" : "A");
+
+ seq_printf(s, "\t");
+ }
+
+ seq_printf(s, "\n");
+ }
+
+ return 0;
+}
+
+static int at91_gpio_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, at91_gpio_show, NULL);
+}
+
+static const struct file_operations at91_gpio_operations = {
+ .open = at91_gpio_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init at91_gpio_debugfs_init(void)
+{
+ /* /sys/kernel/debug/at91_gpio */
+ (void) debugfs_create_file("at91_gpio", S_IFREG | S_IRUGO, NULL, NULL, &at91_gpio_operations);
+ return 0;
+}
+postcore_initcall(at91_gpio_debugfs_init);
+
+#endif
+
+/*--------------------------------------------------------------------------*/
+
/*
* Called from the processor-specific init to enable GPIO interrupt support.
*/
void __init at91_gpio_irq_setup(void)
{
- unsigned pioc, pin;
+ unsigned pioc, pin;
+ struct at91_gpio_bank *this, *prev;
- for (pioc = 0, pin = PIN_BASE;
- pioc < gpio_banks;
- pioc++) {
- void __iomem *controller;
- unsigned id = gpio[pioc].id;
+ for (pioc = 0, pin = PIN_BASE, this = gpio, prev = NULL;
+ pioc++ < gpio_banks;
+ prev = this, this++) {
+ unsigned id = this->id;
unsigned i;
- clk_enable(gpio[pioc].clock); /* enable PIO controller's clock */
+ /* enable PIO controller's clock */
+ clk_enable(this->clock);
- controller = (void __iomem *) AT91_VA_BASE_SYS + gpio[pioc].offset;
- __raw_writel(~0, controller + PIO_IDR);
+ __raw_writel(~0, this->regbase + PIO_IDR);
- set_irq_data(id, (void *) pin);
- set_irq_chip_data(id, controller);
-
- for (i = 0; i < 32; i++, pin++) {
+ for (i = 0, pin = this->chipbase; i < 32; i++, pin++) {
/*
* Can use the "simple" and not "edge" handler since it's
* shorter, and the AIC handles interrupts sanely.
@@ -446,6 +519,14 @@ void __init at91_gpio_irq_setup(void)
set_irq_flags(pin, IRQF_VALID);
}
+ /* The toplevel handler handles one bank of GPIOs, except
+ * AT91SAM9263_ID_PIOCDE handles three... PIOC is first in
+ * the list, so we only set up that handler.
+ */
+ if (prev && prev->next == this)
+ continue;
+
+ set_irq_chip_data(id, this);
set_irq_chained_handler(id, gpio_irq_handler);
}
pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
@@ -456,8 +537,20 @@ void __init at91_gpio_irq_setup(void)
*/
void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
{
+ unsigned i;
+ struct at91_gpio_bank *last;
+
BUG_ON(nr_banks > MAX_GPIO_BANKS);
gpio = data;
gpio_banks = nr_banks;
+
+ for (i = 0, last = NULL; i < nr_banks; i++, last = data, data++) {
+ data->chipbase = PIN_BASE + i * 32;
+ data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS;
+
+ /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
+ if (last && last->id == data->id)
+ last->next = data;
+ }
}
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 0d5144973988..9cdcda500fe8 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -14,11 +14,62 @@
#include <linux/init.h>
#include <asm/mach-types.h>
-#include <asm/leds.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
+/* ------------------------------------------------------------------------- */
+
+#if defined(CONFIG_NEW_LEDS)
+
+#include <linux/platform_device.h>
+
+/*
+ * New cross-platform LED support.
+ */
+
+static struct gpio_led_platform_data led_data;
+
+static struct platform_device at91_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &led_data,
+};
+
+void __init at91_gpio_leds(struct gpio_led *leds, int nr)
+{
+ int i;
+
+ if (!nr)
+ return;
+
+ for (i = 0; i < nr; i++)
+ at91_set_gpio_output(leds[i].gpio, leds[i].active_low);
+
+ led_data.leds = leds;
+ led_data.num_leds = nr;
+ platform_device_register(&at91_leds);
+}
+
+#else
+void __init at91_gpio_leds(struct gpio_led *leds, int nr) {}
+#endif
+
+
+/* ------------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+
+#include <asm/leds.h>
+
+/*
+ * Old ARM-specific LED framework; not fully functional when generic time is
+ * in use.
+ */
+
+static u8 at91_leds_cpu;
+static u8 at91_leds_timer;
+
static inline void at91_led_on(unsigned int led)
{
at91_set_gpio_value(led, 0);
@@ -93,3 +144,18 @@ static int __init leds_init(void)
}
__initcall(leds_init);
+
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+ /* Enable GPIO to access the LEDs */
+ at91_set_gpio_output(cpu_led, 1);
+ at91_set_gpio_output(timer_led, 1);
+
+ at91_leds_cpu = cpu_led;
+ at91_leds_timer = timer_led;
+}
+
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 98cb61482917..a67defd50438 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -52,7 +52,7 @@ static suspend_state_t target_state;
/*
* Called after processes are frozen, but before we shutdown devices.
*/
-static int at91_pm_set_target(suspend_state_t state)
+static int at91_pm_begin(suspend_state_t state)
{
target_state = state;
return 0;
@@ -80,6 +80,11 @@ static int at91_pm_verify_clocks(void)
pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
}
+ } else if (cpu_is_at91cap9()) {
+ if ((scsr & AT91CAP9_PMC_UHP) != 0) {
+ pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
+ return 0;
+ }
}
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
@@ -197,11 +202,20 @@ error:
return 0;
}
+/*
+ * Called right prior to thawing processes.
+ */
+static void at91_pm_end(void)
+{
+ target_state = PM_SUSPEND_ON;
+}
+
static struct platform_suspend_ops at91_pm_ops ={
- .valid = at91_pm_valid_state,
- .set_target = at91_pm_set_target,
- .enter = at91_pm_enter,
+ .valid = at91_pm_valid_state,
+ .begin = at91_pm_begin,
+ .enter = at91_pm_enter,
+ .end = at91_pm_end,
};
static int __init at91_pm_init(void)
diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c
index f428af7545b4..e5dc33f1f95c 100644
--- a/arch/arm/mach-clps711x/time.c
+++ b/arch/arm/mach-clps711x/time.c
@@ -50,9 +50,7 @@ static unsigned long clps711x_gettimeoffset(void)
static irqreturn_t
p720t_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
timer_tick();
- write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
index 986205ec9269..2ac63671ea5f 100644
--- a/arch/arm/mach-clps7500/core.c
+++ b/arch/arm/mach-clps7500/core.c
@@ -298,8 +298,6 @@ extern unsigned long ioc_timer_gettimeoffset(void);
static irqreturn_t
clps7500_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
timer_tick();
/* Why not using do_leds interface?? */
@@ -313,8 +311,6 @@ clps7500_timer_interrupt(int irq, void *dev_id)
}
}
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 8c1b5690dfe8..7710e14b5268 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -178,8 +178,6 @@ ebsa110_timer_interrupt(int irq, void *dev_id)
{
u32 count;
- write_seqlock(&xtime_lock);
-
/* latch and read timer 1 */
__raw_writeb(0x40, PIT_CTRL);
count = __raw_readb(PIT_T1);
@@ -192,8 +190,6 @@ ebsa110_timer_interrupt(int irq, void *dev_id)
timer_tick();
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 70b2c7801110..91f6a07a51d5 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -3,6 +3,7 @@
* Core routines for Cirrus EP93xx chips.
*
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
*
* Thanks go to Michael Burian and Ray Lehtiniemi for their key
* role in the ep93xx linux community.
@@ -21,7 +22,6 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/bitops.h>
-#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/device.h>
@@ -99,8 +99,6 @@ static unsigned int last_jiffy_time;
static int ep93xx_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
__raw_writel(1, EP93XX_TIMER1_CLEAR);
while ((signed long)
(__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time)
@@ -109,8 +107,6 @@ static int ep93xx_timer_interrupt(int irq, void *dev_id)
timer_tick();
}
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
@@ -157,38 +153,41 @@ static unsigned char gpio_int_enabled[3];
static unsigned char gpio_int_type1[3];
static unsigned char gpio_int_type2[3];
-static void update_gpio_int_params(int abf)
+/* Port ordering is: A B F */
+static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
+static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 };
+static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
+static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x5c };
+
+static void update_gpio_int_params(unsigned port)
{
- if (abf == 0) {
- __raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE);
- __raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2);
- __raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1);
- __raw_writeb(gpio_int_unmasked[0] & gpio_int_enabled[0], EP93XX_GPIO_A_INT_ENABLE);
- } else if (abf == 1) {
- __raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE);
- __raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2);
- __raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1);
- __raw_writeb(gpio_int_unmasked[1] & gpio_int_enabled[1], EP93XX_GPIO_B_INT_ENABLE);
- } else if (abf == 2) {
- __raw_writeb(0, EP93XX_GPIO_F_INT_ENABLE);
- __raw_writeb(gpio_int_type2[2], EP93XX_GPIO_F_INT_TYPE2);
- __raw_writeb(gpio_int_type1[2], EP93XX_GPIO_F_INT_TYPE1);
- __raw_writeb(gpio_int_unmasked[2] & gpio_int_enabled[2], EP93XX_GPIO_F_INT_ENABLE);
- } else {
- BUG();
- }
-}
+ BUG_ON(port > 2);
+ __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
-static unsigned char data_register_offset[8] = {
- 0x00, 0x04, 0x08, 0x0c, 0x20, 0x30, 0x38, 0x40,
+ __raw_writeb(gpio_int_type2[port],
+ EP93XX_GPIO_REG(int_type2_register_offset[port]));
+
+ __raw_writeb(gpio_int_type1[port],
+ EP93XX_GPIO_REG(int_type1_register_offset[port]));
+
+ __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
+ EP93XX_GPIO_REG(int_en_register_offset[port]));
+}
+
+/* Port ordering is: A B F D E C G H */
+static const u8 data_register_offset[8] = {
+ 0x00, 0x04, 0x30, 0x0c, 0x20, 0x08, 0x38, 0x40,
};
-static unsigned char data_direction_register_offset[8] = {
- 0x10, 0x14, 0x18, 0x1c, 0x24, 0x34, 0x3c, 0x44,
+static const u8 data_direction_register_offset[8] = {
+ 0x10, 0x14, 0x34, 0x1c, 0x24, 0x18, 0x3c, 0x44,
};
-void gpio_line_config(int line, int direction)
+#define GPIO_IN 0
+#define GPIO_OUT 1
+
+static void ep93xx_gpio_set_direction(unsigned line, int direction)
{
unsigned int data_direction_register;
unsigned long flags;
@@ -199,14 +198,10 @@ void gpio_line_config(int line, int direction)
local_irq_save(flags);
if (direction == GPIO_OUT) {
- if (line >= 0 && line < 16) {
- /* Port A/B. */
+ if (line >= 0 && line <= EP93XX_GPIO_LINE_MAX_IRQ) {
+ /* Port A/B/F */
gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
update_gpio_int_params(line >> 3);
- } else if (line >= 40 && line < 48) {
- /* Port F. */
- gpio_int_unmasked[2] &= ~(1 << (line & 7));
- update_gpio_int_params(2);
}
v = __raw_readb(data_direction_register);
@@ -219,39 +214,58 @@ void gpio_line_config(int line, int direction)
}
local_irq_restore(flags);
}
-EXPORT_SYMBOL(gpio_line_config);
-int gpio_line_get(int line)
+int gpio_direction_input(unsigned gpio)
+{
+ if (gpio > EP93XX_GPIO_LINE_MAX)
+ return -EINVAL;
+
+ ep93xx_gpio_set_direction(gpio, GPIO_IN);
+
+ return 0;
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+ if (gpio > EP93XX_GPIO_LINE_MAX)
+ return -EINVAL;
+
+ gpio_set_value(gpio, value);
+ ep93xx_gpio_set_direction(gpio, GPIO_OUT);
+
+ return 0;
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+int gpio_get_value(unsigned gpio)
{
unsigned int data_register;
- data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]);
+ data_register = EP93XX_GPIO_REG(data_register_offset[gpio >> 3]);
- return !!(__raw_readb(data_register) & (1 << (line & 7)));
+ return !!(__raw_readb(data_register) & (1 << (gpio & 7)));
}
-EXPORT_SYMBOL(gpio_line_get);
+EXPORT_SYMBOL(gpio_get_value);
-void gpio_line_set(int line, int value)
+void gpio_set_value(unsigned gpio, int value)
{
unsigned int data_register;
unsigned long flags;
unsigned char v;
- data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]);
+ data_register = EP93XX_GPIO_REG(data_register_offset[gpio >> 3]);
local_irq_save(flags);
- if (value == EP93XX_GPIO_HIGH) {
- v = __raw_readb(data_register);
- v |= 1 << (line & 7);
- __raw_writeb(v, data_register);
- } else if (value == EP93XX_GPIO_LOW) {
- v = __raw_readb(data_register);
- v &= ~(1 << (line & 7));
- __raw_writeb(v, data_register);
- }
+ v = __raw_readb(data_register);
+ if (value)
+ v |= 1 << (gpio & 7);
+ else
+ v &= ~(1 << (gpio & 7));
+ __raw_writeb(v, data_register);
local_irq_restore(flags);
}
-EXPORT_SYMBOL(gpio_line_set);
+EXPORT_SYMBOL(gpio_set_value);
/*************************************************************************
@@ -265,47 +279,67 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
- desc = irq_desc + IRQ_EP93XX_GPIO(0) + i;
- desc_handle_irq(IRQ_EP93XX_GPIO(0) + i, desc);
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
+ desc = irq_desc + gpio_irq;
+ desc_handle_irq(gpio_irq, desc);
}
}
status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
- desc = irq_desc + IRQ_EP93XX_GPIO(8) + i;
- desc_handle_irq(IRQ_EP93XX_GPIO(8) + i, desc);
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
+ desc = irq_desc + gpio_irq;
+ desc_handle_irq(gpio_irq, desc);
}
}
}
static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
{
- int gpio_irq = IRQ_EP93XX_GPIO(16) + (((irq + 1) & 7) ^ 4);
+ /*
+ * map discontiguous hw irq range to continous sw irq range:
+ *
+ * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
+ */
+ int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
desc_handle_irq(gpio_irq, irq_desc + gpio_irq);
}
+static void ep93xx_gpio_irq_ack(unsigned int irq)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+ int port_mask = 1 << (line & 7);
+
+ if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
+ gpio_int_type2[port] ^= port_mask; /* switch edge direction */
+ update_gpio_int_params(port);
+ }
+
+ __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
+}
+
static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
{
- int line = irq - IRQ_EP93XX_GPIO(0);
+ int line = irq_to_gpio(irq);
int port = line >> 3;
+ int port_mask = 1 << (line & 7);
- gpio_int_unmasked[port] &= ~(1 << (line & 7));
+ if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE)
+ gpio_int_type2[port] ^= port_mask; /* switch edge direction */
+
+ gpio_int_unmasked[port] &= ~port_mask;
update_gpio_int_params(port);
- if (port == 0) {
- __raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK);
- } else if (port == 1) {
- __raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
- } else if (port == 2) {
- __raw_writel(1 << (line & 7), EP93XX_GPIO_F_INT_ACK);
- }
+ __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
}
static void ep93xx_gpio_irq_mask(unsigned int irq)
{
- int line = irq - IRQ_EP93XX_GPIO(0);
+ int line = irq_to_gpio(irq);
int port = line >> 3;
gpio_int_unmasked[port] &= ~(1 << (line & 7));
@@ -314,7 +348,7 @@ static void ep93xx_gpio_irq_mask(unsigned int irq)
static void ep93xx_gpio_irq_unmask(unsigned int irq)
{
- int line = irq - IRQ_EP93XX_GPIO(0);
+ int line = irq_to_gpio(irq);
int port = line >> 3;
gpio_int_unmasked[port] |= 1 << (line & 7);
@@ -329,38 +363,54 @@ static void ep93xx_gpio_irq_unmask(unsigned int irq)
*/
static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
{
- int port;
- int line;
-
- line = irq - IRQ_EP93XX_GPIO(0);
- if (line >= 0 && line < 16) {
- gpio_line_config(line, GPIO_IN);
- } else {
- gpio_line_config(EP93XX_GPIO_LINE_F(line-16), GPIO_IN);
+ struct irq_desc *desc = irq_desc + irq;
+ const int gpio = irq_to_gpio(irq);
+ const int port = gpio >> 3;
+ const int port_mask = 1 << (gpio & 7);
+
+ ep93xx_gpio_set_direction(gpio, GPIO_IN);
+
+ switch (type) {
+ case IRQT_RISING:
+ gpio_int_type1[port] |= port_mask;
+ gpio_int_type2[port] |= port_mask;
+ desc->handle_irq = handle_edge_irq;
+ break;
+ case IRQT_FALLING:
+ gpio_int_type1[port] |= port_mask;
+ gpio_int_type2[port] &= ~port_mask;
+ desc->handle_irq = handle_edge_irq;
+ break;
+ case IRQT_HIGH:
+ gpio_int_type1[port] &= ~port_mask;
+ gpio_int_type2[port] |= port_mask;
+ desc->handle_irq = handle_level_irq;
+ break;
+ case IRQT_LOW:
+ gpio_int_type1[port] &= ~port_mask;
+ gpio_int_type2[port] &= ~port_mask;
+ desc->handle_irq = handle_level_irq;
+ break;
+ case IRQT_BOTHEDGE:
+ gpio_int_type1[port] |= port_mask;
+ /* set initial polarity based on current input level */
+ if (gpio_get_value(gpio))
+ gpio_int_type2[port] &= ~port_mask; /* falling */
+ else
+ gpio_int_type2[port] |= port_mask; /* rising */
+ desc->handle_irq = handle_edge_irq;
+ break;
+ default:
+ pr_err("ep93xx: failed to set irq type %d for gpio %d\n",
+ type, gpio);
+ return -EINVAL;
}
- port = line >> 3;
- line &= 7;
-
- if (type & IRQT_RISING) {
- gpio_int_enabled[port] |= 1 << line;
- gpio_int_type1[port] |= 1 << line;
- gpio_int_type2[port] |= 1 << line;
- } else if (type & IRQT_FALLING) {
- gpio_int_enabled[port] |= 1 << line;
- gpio_int_type1[port] |= 1 << line;
- gpio_int_type2[port] &= ~(1 << line);
- } else if (type & IRQT_HIGH) {
- gpio_int_enabled[port] |= 1 << line;
- gpio_int_type1[port] &= ~(1 << line);
- gpio_int_type2[port] |= 1 << line;
- } else if (type & IRQT_LOW) {
- gpio_int_enabled[port] |= 1 << line;
- gpio_int_type1[port] &= ~(1 << line);
- gpio_int_type2[port] &= ~(1 << line);
- } else {
- gpio_int_enabled[port] &= ~(1 << line);
- }
+ gpio_int_enabled[port] |= port_mask;
+
+ desc->status &= ~IRQ_TYPE_SENSE_MASK;
+ desc->status |= type & IRQ_TYPE_SENSE_MASK;
+
update_gpio_int_params(port);
return 0;
@@ -368,7 +418,8 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
static struct irq_chip ep93xx_gpio_irq_chip = {
.name = "GPIO",
- .ack = ep93xx_gpio_irq_mask_ack,
+ .ack = ep93xx_gpio_irq_ack,
+ .mask_ack = ep93xx_gpio_irq_mask_ack,
.mask = ep93xx_gpio_irq_mask,
.unmask = ep93xx_gpio_irq_unmask,
.set_type = ep93xx_gpio_irq_type,
@@ -377,15 +428,16 @@ static struct irq_chip ep93xx_gpio_irq_chip = {
void __init ep93xx_init_irq(void)
{
- int irq;
+ int gpio_irq;
vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
- for (irq = IRQ_EP93XX_GPIO(0); irq <= IRQ_EP93XX_GPIO(23); irq++) {
- set_irq_chip(irq, &ep93xx_gpio_irq_chip);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
+ for (gpio_irq = gpio_to_irq(0);
+ gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
+ set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip);
+ set_irq_handler(gpio_irq, handle_level_irq);
+ set_irq_flags(gpio_irq, IRQF_VALID);
}
set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c
index 3a63941d43be..b2a21189dd81 100644
--- a/arch/arm/mach-footbridge/dc21285-timer.c
+++ b/arch/arm/mach-footbridge/dc21285-timer.c
@@ -30,14 +30,10 @@ static unsigned long timer1_gettimeoffset (void)
static irqreturn_t
timer1_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
*CSR_TIMER1_CLR = 0;
timer_tick();
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c
index d08d64139d00..a764e01d3573 100644
--- a/arch/arm/mach-footbridge/isa-timer.c
+++ b/arch/arm/mach-footbridge/isa-timer.c
@@ -64,9 +64,7 @@ static unsigned long isa_gettimeoffset(void)
static irqreturn_t
isa_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
timer_tick();
- write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c
index 9107b8e2ad6e..c2a431f482f0 100644
--- a/arch/arm/mach-h720x/cpu-h7201.c
+++ b/arch/arm/mach-h720x/cpu-h7201.c
@@ -29,13 +29,9 @@
static irqreturn_t
h7201_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
CPU_REG (TIMER_VIRT, TIMER_TOPSTAT);
timer_tick();
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c
index 0a1a25fb8ba8..c627fa124eb3 100644
--- a/arch/arm/mach-h720x/cpu-h7202.c
+++ b/arch/arm/mach-h720x/cpu-h7202.c
@@ -113,9 +113,7 @@ h7202_timerx_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
mask = CPU_REG (TIMER_VIRT, TIMER_TOPSTAT);
if ( mask & TSTAT_T0INT ) {
- write_seqlock(&xtime_lock);
timer_tick();
- write_sequnlock(&xtime_lock);
if( mask == TSTAT_T0INT )
return;
}
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 02272aa36e90..88d5e61a2e13 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -1,9 +1,6 @@
#
# Makefile for the linux kernel.
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
# Object file lists.
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index e9c82deb791d..7fbbc17f8e8b 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -250,8 +250,6 @@ unsigned long integrator_gettimeoffset(void)
static irqreturn_t
integrator_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
/*
* clear the interrupt
*/
@@ -259,8 +257,6 @@ integrator_timer_interrupt(int irq, void *dev_id)
timer_tick();
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 72280754354d..df37e93c6fc9 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -214,7 +214,7 @@ static int irq_resume(struct sys_device *dev)
#endif
static struct sysdev_class irq_class = {
- set_kset_name("irq"),
+ .name = "irq",
.suspend = irq_suspend,
.resume = irq_resume,
};
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index d4d8134ce567..d55fa4e9bb43 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -440,7 +440,7 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
return 1;
}
-static irqreturn_t v3_irq(int irq, void *devid)
+static irqreturn_t v3_irq(int dummy, void *devid)
{
#ifdef CONFIG_DEBUG_LL
struct pt_regs *regs = get_irq_regs();
@@ -448,8 +448,10 @@ static irqreturn_t v3_irq(int irq, void *devid)
unsigned long instr = *(unsigned long *)pc;
char buf[128];
- sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n", irq,
- pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255,
+ sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
+ "ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr,
+ __raw_readl(SC_LBFADDR),
+ __raw_readl(SC_LBFCODE) & 255,
v3_readb(V3_LB_ISTAT));
printascii(buf);
#endif
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 2b086ab2668c..74c65ce221de 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -3,7 +3,7 @@
*
* Board support code for the GLAN Tank.
*
- * Copyright (C) 2006 Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2006, 2007 Martin Michlmayr <tbm@cyrius.com>
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
*
* This program is free software; you can redistribute it and/or modify it
@@ -21,6 +21,7 @@
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <asm/io.h>
@@ -118,7 +119,7 @@ subsys_initcall(glantank_pci_init);
* GLAN Tank machine initialization.
*/
static struct physmap_flash_data glantank_flash_data = {
- .width = 1,
+ .width = 2,
};
static struct resource glantank_flash_resource = {
@@ -166,6 +167,13 @@ static struct platform_device glantank_serial_device = {
.resource = &glantank_uart_resource,
};
+static struct i2c_board_info __initdata glantank_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("rtc-rs5c372", 0x32),
+ .type = "rs5c372a",
+ },
+};
+
static void glantank_power_off(void)
{
__raw_writeb(0x01, 0xfe8d0004);
@@ -183,6 +191,9 @@ static void __init glantank_init_machine(void)
platform_device_register(&iop3xx_dma_0_channel);
platform_device_register(&iop3xx_dma_1_channel);
+ i2c_register_board_info(0, glantank_i2c_devices,
+ ARRAY_SIZE(glantank_i2c_devices));
+
pm_power_off = glantank_power_off;
}
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index cb6ad211887a..81cdc8267206 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -206,8 +206,6 @@ unsigned long ixp2000_gettimeoffset (void)
static int ixp2000_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
/* clear timer 1 */
ixp2000_reg_wrb(IXP2000_T1_CLR, 1);
@@ -217,8 +215,6 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id)
next_jiffy_time -= ticks_per_jiffy;
}
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index 16356ffc86ae..5fea5a132939 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -22,7 +22,6 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/bitops.h>
-#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/device.h>
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index 7a85ced56718..d3a779a7a35f 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -19,7 +19,6 @@
#include <linux/tty.h>
#include <linux/bitops.h>
#include <linux/ioport.h>
-#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/device.h>
@@ -40,7 +39,6 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
#include <asm/mach/pci.h>
static int __init espresso_pci_init(void)
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index c41a6b5a0acc..5c5d4d66dee8 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -24,7 +24,6 @@
#include <linux/tty.h>
#include <linux/bitops.h>
#include <linux/ioport.h>
-#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/device.h>
@@ -44,7 +43,6 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
#include <asm/mach/pci.h>
/*
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index e35644961aa4..f0f70ba1e46d 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -23,7 +23,6 @@
#include <linux/tty.h>
#include <linux/bitops.h>
#include <linux/ioport.h>
-#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/device.h>
@@ -44,7 +43,6 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
#include <asm/mach/pci.h>
/*
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 61b2dfcb89d6..e774447c0592 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -189,6 +189,20 @@ config IXP4XX_INDIRECT_PCI
need to use the indirect method instead. If you don't know
what you need, leave this option unselected.
+config IXP4XX_QMGR
+ tristate "IXP4xx Queue Manager support"
+ help
+ This driver supports IXP4xx built-in hardware queue manager
+ and is automatically selected by Ethernet and HSS drivers.
+
+config IXP4XX_NPE
+ tristate "IXP4xx Network Processor Engine support"
+ select HOTPLUG
+ select FW_LOADER
+ help
+ This driver supports IXP4xx built-in network coprocessors
+ and is automatically selected by Ethernet and HSS drivers.
+
endmenu
endif
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 77e00ade5585..c1956882c48b 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -23,10 +23,12 @@ obj-$(CONFIG_MACH_AVILA) += avila-setup.o
obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
-obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o
-obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
-obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
+obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o
+obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o
+obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
+obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
+obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index d59b8dc7dc7a..e38f45fa58ae 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -18,6 +18,7 @@
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
+#include <linux/i2c-gpio.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -47,18 +48,17 @@ static struct platform_device avila_flash = {
.resource = &avila_flash_resource,
};
-static struct ixp4xx_i2c_pins avila_i2c_gpio_pins = {
+static struct i2c_gpio_platform_data avila_i2c_gpio_data = {
.sda_pin = AVILA_SDA_PIN,
.scl_pin = AVILA_SCL_PIN,
};
-static struct platform_device avila_i2c_controller = {
- .name = "IXP4XX-I2C",
+static struct platform_device avila_i2c_gpio = {
+ .name = "i2c-gpio",
.id = 0,
- .dev = {
- .platform_data = &avila_i2c_gpio_pins,
+ .dev = {
+ .platform_data = &avila_i2c_gpio_data,
},
- .num_resources = 0
};
static struct resource avila_uart_resources[] = {
@@ -133,7 +133,7 @@ static struct platform_device avila_pata = {
};
static struct platform_device *avila_devices[] __initdata = {
- &avila_i2c_controller,
+ &avila_i2c_gpio,
&avila_flash,
&avila_uart
};
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index c1271c449246..f6d66dce6852 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -442,7 +442,8 @@ static int ixp4xx_set_next_event(unsigned long evt,
static void ixp4xx_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
- unsigned long opts, osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK;
+ unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
+ unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK;
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
@@ -455,12 +456,15 @@ static void ixp4xx_set_mode(enum clock_event_mode mode,
opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT;
break;
case CLOCK_EVT_MODE_SHUTDOWN:
+ opts &= ~IXP4XX_OST_ENABLE;
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ opts |= IXP4XX_OST_ENABLE;
+ break;
case CLOCK_EVT_MODE_UNUSED:
default:
osrt = opts = 0;
break;
- case CLOCK_EVT_MODE_RESUME:
- break;
}
*IXP4XX_OSRT1 = osrt | opts;
diff --git a/arch/arm/mach-ixp4xx/dsmg600-power.c b/arch/arm/mach-ixp4xx/dsmg600-power.c
deleted file mode 100644
index 34717872d076..000000000000
--- a/arch/arm/mach-ixp4xx/dsmg600-power.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/dsmg600-power.c
- *
- * DSM-G600 Power/Reset driver
- * Author: Michael Westerhof <mwester@dls.net>
- *
- * Based on nslu2-power.c
- * Copyright (C) 2005 Tower Technologies
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- *
- * which was based on nslu2-io.c
- * Copyright (C) 2004 Karen Spearel
- *
- * Maintainers: http://www.nslu2-linux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/reboot.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/jiffies.h>
-#include <linux/timer.h>
-
-#include <asm/mach-types.h>
-
-extern void ctrl_alt_del(void);
-
-/* This is used to make sure the power-button pusher is serious. The button
- * must be held until the value of this counter reaches zero.
- */
-static volatile int power_button_countdown;
-
-/* Must hold the button down for at least this many counts to be processed */
-#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
-
-static void dsmg600_power_handler(unsigned long data);
-static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0);
-
-static void dsmg600_power_handler(unsigned long data)
-{
- /* This routine is called twice per second to check the
- * state of the power button.
- */
-
- if (*IXP4XX_GPIO_GPINR & DSMG600_PB_BM) {
-
- /* IO Pin is 1 (button pushed) */
- if (power_button_countdown == 0) {
- /* Signal init to do the ctrlaltdel action, this will bypass
- * init if it hasn't started and do a kernel_restart.
- */
- ctrl_alt_del();
-
- /* Change the state of the power LED to "blink" */
- gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
- }
- power_button_countdown--;
-
- } else {
- power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
- }
-
- mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
-}
-
-static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id)
-{
- /* This is the paper-clip reset, it shuts the machine down directly. */
- machine_power_off();
-
- return IRQ_HANDLED;
-}
-
-static int __init dsmg600_power_init(void)
-{
- if (!(machine_is_dsmg600()))
- return 0;
-
- if (request_irq(DSMG600_RB_IRQ, &dsmg600_reset_handler,
- IRQF_DISABLED | IRQF_TRIGGER_LOW, "DSM-G600 reset button",
- NULL) < 0) {
-
- printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
- DSMG600_RB_IRQ);
-
- return -EIO;
- }
-
- /* The power button on the D-Link DSM-G600 is on GPIO 15, but
- * it cannot handle interrupts on that GPIO line. So we'll
- * have to poll it with a kernel timer.
- */
-
- /* Make sure that the power button GPIO is set up as an input */
- gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
-
- /* Set the initial value for the power button IRQ handler */
- power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-
- mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
-
- return 0;
-}
-
-static void __exit dsmg600_power_exit(void)
-{
- if (!(machine_is_dsmg600()))
- return;
-
- del_timer_sync(&dsmg600_power_timer);
-
- free_irq(DSMG600_RB_IRQ, NULL);
-}
-
-module_init(dsmg600_power_init);
-module_exit(dsmg600_power_exit);
-
-MODULE_AUTHOR("Michael Westerhof <mwester@dls.net>");
-MODULE_DESCRIPTION("DSM-G600 Power/Reset driver");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 1e75e105c4f7..688659668bdf 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -1,24 +1,37 @@
/*
* DSM-G600 board-setup
*
+ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
* Copyright (C) 2006 Tower Technologies
- * Author: Alessandro Zummo <a.zummo@towertech.it>
*
- * based ixdp425-setup.c:
+ * based on ixdp425-setup.c:
* Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * based on nslu2-power.c:
+ * Copyright (C) 2005 Tower Technologies
+ * based on nslu2-io.c:
+ * Copyright (C) 2004 Karen Spearel
*
* Author: Alessandro Zummo <a.zummo@towertech.it>
+ * Author: Michael Westerhof <mwester@dls.net>
+ * Author: Rod Whitby <rod@whitby.id.au>
* Maintainers: http://www.nslu2-linux.org/
*/
-#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
+#include <linux/leds.h>
+#include <linux/reboot.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
+#include <asm/gpio.h>
static struct flash_platform_data dsmg600_flash_data = {
.map_name = "cfi_probe",
@@ -37,40 +50,47 @@ static struct platform_device dsmg600_flash = {
.resource = &dsmg600_flash_resource,
};
-static struct ixp4xx_i2c_pins dsmg600_i2c_gpio_pins = {
+static struct i2c_gpio_platform_data dsmg600_i2c_gpio_data = {
.sda_pin = DSMG600_SDA_PIN,
.scl_pin = DSMG600_SCL_PIN,
};
-static struct platform_device dsmg600_i2c_controller = {
- .name = "IXP4XX-I2C",
+static struct platform_device dsmg600_i2c_gpio = {
+ .name = "i2c-gpio",
.id = 0,
- .dev.platform_data = &dsmg600_i2c_gpio_pins,
+ .dev = {
+ .platform_data = &dsmg600_i2c_gpio_data,
+ },
};
-#ifdef CONFIG_LEDS_CLASS
-static struct resource dsmg600_led_resources[] = {
+static struct i2c_board_info __initdata dsmg600_i2c_board_info [] = {
{
- .name = "power",
- .start = DSMG600_LED_PWR_GPIO,
- .end = DSMG600_LED_PWR_GPIO,
- .flags = IXP4XX_GPIO_HIGH,
+ I2C_BOARD_INFO("rtc-pcf8563", 0x51),
},
+};
+
+static struct gpio_led dsmg600_led_pins[] = {
{
- .name = "wlan",
- .start = DSMG600_LED_WLAN_GPIO,
- .end = DSMG600_LED_WLAN_GPIO,
- .flags = IXP4XX_GPIO_LOW,
+ .name = "power",
+ .gpio = DSMG600_LED_PWR_GPIO,
},
+ {
+ .name = "wlan",
+ .gpio = DSMG600_LED_WLAN_GPIO,
+ .active_low = true,
+ },
+};
+
+static struct gpio_led_platform_data dsmg600_led_data = {
+ .num_leds = ARRAY_SIZE(dsmg600_led_pins),
+ .leds = dsmg600_led_pins,
};
static struct platform_device dsmg600_leds = {
- .name = "IXP4XX-GPIO-LED",
- .id = -1,
- .num_resources = ARRAY_SIZE(dsmg600_led_resources),
- .resource = dsmg600_led_resources,
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &dsmg600_led_data,
};
-#endif
static struct resource dsmg600_uart_resources[] = {
{
@@ -116,8 +136,9 @@ static struct platform_device dsmg600_uart = {
};
static struct platform_device *dsmg600_devices[] __initdata = {
- &dsmg600_i2c_controller,
+ &dsmg600_i2c_gpio,
&dsmg600_flash,
+ &dsmg600_leds,
};
static void dsmg600_power_off(void)
@@ -129,6 +150,57 @@ static void dsmg600_power_off(void)
gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
}
+/* This is used to make sure the power-button pusher is serious. The button
+ * must be held until the value of this counter reaches zero.
+ */
+static int power_button_countdown;
+
+/* Must hold the button down for at least this many counts to be processed */
+#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
+
+static void dsmg600_power_handler(unsigned long data);
+static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0);
+
+static void dsmg600_power_handler(unsigned long data)
+{
+ /* This routine is called twice per second to check the
+ * state of the power button.
+ */
+
+ if (gpio_get_value(DSMG600_PB_GPIO)) {
+
+ /* IO Pin is 1 (button pushed) */
+ if (power_button_countdown > 0)
+ power_button_countdown--;
+
+ } else {
+
+ /* Done on button release, to allow for auto-power-on mods. */
+ if (power_button_countdown == 0) {
+ /* Signal init to do the ctrlaltdel action,
+ * this will bypass init if it hasn't started
+ * and do a kernel_restart.
+ */
+ ctrl_alt_del();
+
+ /* Change the state of the power LED to "blink" */
+ gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
+ } else {
+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+ }
+ }
+
+ mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
+}
+
+static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id)
+{
+ /* This is the paper-clip reset, it shuts the machine down directly. */
+ machine_power_off();
+
+ return IRQ_HANDLED;
+}
+
static void __init dsmg600_timer_init(void)
{
/* The xtal on this machine is non-standard. */
@@ -153,7 +225,8 @@ static void __init dsmg600_init(void)
dsmg600_flash_resource.end =
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
- pm_power_off = dsmg600_power_off;
+ i2c_register_board_info(0, dsmg600_i2c_board_info,
+ ARRAY_SIZE(dsmg600_i2c_board_info));
/* The UART is required on the DSM-G600 (Redboot cannot use the
* NIC) -- do it here so that it does *not* get removed if
@@ -163,10 +236,28 @@ static void __init dsmg600_init(void)
platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
-#ifdef CONFIG_LEDS_CLASS
- /* We don't care whether or not this works. */
- (void)platform_device_register(&dsmg600_leds);
-#endif
+ pm_power_off = dsmg600_power_off;
+
+ if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
+ IRQF_DISABLED | IRQF_TRIGGER_LOW,
+ "DSM-G600 reset button", NULL) < 0) {
+
+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+ gpio_to_irq(DSMG600_RB_GPIO));
+ }
+
+ /* The power button on the D-Link DSM-G600 is on GPIO 15, but
+ * it cannot handle interrupts on that GPIO line. So we'll
+ * have to poll it with a kernel timer.
+ */
+
+ /* Make sure that the power button GPIO is set up as an input */
+ gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
+
+ /* Set the initial value for the power button IRQ handler */
+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+
+ mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
}
MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index d5008d8fc9a5..44584afb34a3 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -15,6 +15,7 @@
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
+#include <linux/i2c-gpio.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -120,18 +121,17 @@ static struct platform_device ixdp425_flash_nand = {
};
#endif /* CONFIG_MTD_NAND_PLATFORM */
-static struct ixp4xx_i2c_pins ixdp425_i2c_gpio_pins = {
+static struct i2c_gpio_platform_data ixdp425_i2c_gpio_data = {
.sda_pin = IXDP425_SDA_PIN,
.scl_pin = IXDP425_SCL_PIN,
};
-static struct platform_device ixdp425_i2c_controller = {
- .name = "IXP4XX-I2C",
+static struct platform_device ixdp425_i2c_gpio = {
+ .name = "i2c-gpio",
.id = 0,
- .dev = {
- .platform_data = &ixdp425_i2c_gpio_pins,
+ .dev = {
+ .platform_data = &ixdp425_i2c_gpio_data,
},
- .num_resources = 0
};
static struct resource ixdp425_uart_resources[] = {
@@ -177,14 +177,41 @@ static struct platform_device ixdp425_uart = {
.resource = ixdp425_uart_resources
};
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info ixdp425_plat_eth[] = {
+ {
+ .phy = 0,
+ .rxq = 3,
+ .txreadyq = 20,
+ }, {
+ .phy = 1,
+ .rxq = 4,
+ .txreadyq = 21,
+ }
+};
+
+static struct platform_device ixdp425_eth[] = {
+ {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEB,
+ .dev.platform_data = ixdp425_plat_eth,
+ }, {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEC,
+ .dev.platform_data = ixdp425_plat_eth + 1,
+ }
+};
+
static struct platform_device *ixdp425_devices[] __initdata = {
- &ixdp425_i2c_controller,
+ &ixdp425_i2c_gpio,
&ixdp425_flash,
#if defined(CONFIG_MTD_NAND_PLATFORM) || \
defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
&ixdp425_flash_nand,
#endif
- &ixdp425_uart
+ &ixdp425_uart,
+ &ixdp425_eth[0],
+ &ixdp425_eth[1],
};
static void __init ixdp425_init(void)
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
new file mode 100644
index 000000000000..83c137ec582c
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -0,0 +1,741 @@
+/*
+ * Intel IXP4xx Network Processor Engine driver for Linux
+ *
+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * The code is based on publicly available information:
+ * - Intel IXP4xx Developer's Manual and other e-papers
+ * - Intel IXP400 Access Library Software (BSD license)
+ * - previous works by Christian Hohnstaedt <chohnstaedt@innominate.com>
+ * Thanks, Christian.
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/firmware.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <asm/arch/npe.h>
+
+#define DEBUG_MSG 0
+#define DEBUG_FW 0
+
+#define NPE_COUNT 3
+#define MAX_RETRIES 1000 /* microseconds */
+#define NPE_42X_DATA_SIZE 0x800 /* in dwords */
+#define NPE_46X_DATA_SIZE 0x1000
+#define NPE_A_42X_INSTR_SIZE 0x1000
+#define NPE_B_AND_C_42X_INSTR_SIZE 0x800
+#define NPE_46X_INSTR_SIZE 0x1000
+#define REGS_SIZE 0x1000
+
+#define NPE_PHYS_REG 32
+
+#define FW_MAGIC 0xFEEDF00D
+#define FW_BLOCK_TYPE_INSTR 0x0
+#define FW_BLOCK_TYPE_DATA 0x1
+#define FW_BLOCK_TYPE_EOF 0xF
+
+/* NPE exec status (read) and command (write) */
+#define CMD_NPE_STEP 0x01
+#define CMD_NPE_START 0x02
+#define CMD_NPE_STOP 0x03
+#define CMD_NPE_CLR_PIPE 0x04
+#define CMD_CLR_PROFILE_CNT 0x0C
+#define CMD_RD_INS_MEM 0x10 /* instruction memory */
+#define CMD_WR_INS_MEM 0x11
+#define CMD_RD_DATA_MEM 0x12 /* data memory */
+#define CMD_WR_DATA_MEM 0x13
+#define CMD_RD_ECS_REG 0x14 /* exec access register */
+#define CMD_WR_ECS_REG 0x15
+
+#define STAT_RUN 0x80000000
+#define STAT_STOP 0x40000000
+#define STAT_CLEAR 0x20000000
+#define STAT_ECS_K 0x00800000 /* pipeline clean */
+
+#define NPE_STEVT 0x1B
+#define NPE_STARTPC 0x1C
+#define NPE_REGMAP 0x1E
+#define NPE_CINDEX 0x1F
+
+#define INSTR_WR_REG_SHORT 0x0000C000
+#define INSTR_WR_REG_BYTE 0x00004000
+#define INSTR_RD_FIFO 0x0F888220
+#define INSTR_RESET_MBOX 0x0FAC8210
+
+#define ECS_BG_CTXT_REG_0 0x00 /* Background Executing Context */
+#define ECS_BG_CTXT_REG_1 0x01 /* Stack level */
+#define ECS_BG_CTXT_REG_2 0x02
+#define ECS_PRI_1_CTXT_REG_0 0x04 /* Priority 1 Executing Context */
+#define ECS_PRI_1_CTXT_REG_1 0x05 /* Stack level */
+#define ECS_PRI_1_CTXT_REG_2 0x06
+#define ECS_PRI_2_CTXT_REG_0 0x08 /* Priority 2 Executing Context */
+#define ECS_PRI_2_CTXT_REG_1 0x09 /* Stack level */
+#define ECS_PRI_2_CTXT_REG_2 0x0A
+#define ECS_DBG_CTXT_REG_0 0x0C /* Debug Executing Context */
+#define ECS_DBG_CTXT_REG_1 0x0D /* Stack level */
+#define ECS_DBG_CTXT_REG_2 0x0E
+#define ECS_INSTRUCT_REG 0x11 /* NPE Instruction Register */
+
+#define ECS_REG_0_ACTIVE 0x80000000 /* all levels */
+#define ECS_REG_0_NEXTPC_MASK 0x1FFF0000 /* BG/PRI1/PRI2 levels */
+#define ECS_REG_0_LDUR_BITS 8
+#define ECS_REG_0_LDUR_MASK 0x00000700 /* all levels */
+#define ECS_REG_1_CCTXT_BITS 16
+#define ECS_REG_1_CCTXT_MASK 0x000F0000 /* all levels */
+#define ECS_REG_1_SELCTXT_BITS 0
+#define ECS_REG_1_SELCTXT_MASK 0x0000000F /* all levels */
+#define ECS_DBG_REG_2_IF 0x00100000 /* debug level */
+#define ECS_DBG_REG_2_IE 0x00080000 /* debug level */
+
+/* NPE watchpoint_fifo register bit */
+#define WFIFO_VALID 0x80000000
+
+/* NPE messaging_status register bit definitions */
+#define MSGSTAT_OFNE 0x00010000 /* OutFifoNotEmpty */
+#define MSGSTAT_IFNF 0x00020000 /* InFifoNotFull */
+#define MSGSTAT_OFNF 0x00040000 /* OutFifoNotFull */
+#define MSGSTAT_IFNE 0x00080000 /* InFifoNotEmpty */
+#define MSGSTAT_MBINT 0x00100000 /* Mailbox interrupt */
+#define MSGSTAT_IFINT 0x00200000 /* InFifo interrupt */
+#define MSGSTAT_OFINT 0x00400000 /* OutFifo interrupt */
+#define MSGSTAT_WFINT 0x00800000 /* WatchFifo interrupt */
+
+/* NPE messaging_control register bit definitions */
+#define MSGCTL_OUT_FIFO 0x00010000 /* enable output FIFO */
+#define MSGCTL_IN_FIFO 0x00020000 /* enable input FIFO */
+#define MSGCTL_OUT_FIFO_WRITE 0x01000000 /* enable FIFO + WRITE */
+#define MSGCTL_IN_FIFO_WRITE 0x02000000
+
+/* NPE mailbox_status value for reset */
+#define RESET_MBOX_STAT 0x0000F0F0
+
+const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" };
+
+#define print_npe(pri, npe, fmt, ...) \
+ printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__)
+
+#if DEBUG_MSG
+#define debug_msg(npe, fmt, ...) \
+ print_npe(KERN_DEBUG, npe, fmt, ## __VA_ARGS__)
+#else
+#define debug_msg(npe, fmt, ...)
+#endif
+
+static struct {
+ u32 reg, val;
+} ecs_reset[] = {
+ { ECS_BG_CTXT_REG_0, 0xA0000000 },
+ { ECS_BG_CTXT_REG_1, 0x01000000 },
+ { ECS_BG_CTXT_REG_2, 0x00008000 },
+ { ECS_PRI_1_CTXT_REG_0, 0x20000080 },
+ { ECS_PRI_1_CTXT_REG_1, 0x01000000 },
+ { ECS_PRI_1_CTXT_REG_2, 0x00008000 },
+ { ECS_PRI_2_CTXT_REG_0, 0x20000080 },
+ { ECS_PRI_2_CTXT_REG_1, 0x01000000 },
+ { ECS_PRI_2_CTXT_REG_2, 0x00008000 },
+ { ECS_DBG_CTXT_REG_0, 0x20000000 },
+ { ECS_DBG_CTXT_REG_1, 0x00000000 },
+ { ECS_DBG_CTXT_REG_2, 0x001E0000 },
+ { ECS_INSTRUCT_REG, 0x1003C00F },
+};
+
+static struct npe npe_tab[NPE_COUNT] = {
+ {
+ .id = 0,
+ .regs = (struct npe_regs __iomem *)IXP4XX_NPEA_BASE_VIRT,
+ .regs_phys = IXP4XX_NPEA_BASE_PHYS,
+ }, {
+ .id = 1,
+ .regs = (struct npe_regs __iomem *)IXP4XX_NPEB_BASE_VIRT,
+ .regs_phys = IXP4XX_NPEB_BASE_PHYS,
+ }, {
+ .id = 2,
+ .regs = (struct npe_regs __iomem *)IXP4XX_NPEC_BASE_VIRT,
+ .regs_phys = IXP4XX_NPEC_BASE_PHYS,
+ }
+};
+
+int npe_running(struct npe *npe)
+{
+ return (__raw_readl(&npe->regs->exec_status_cmd) & STAT_RUN) != 0;
+}
+
+static void npe_cmd_write(struct npe *npe, u32 addr, int cmd, u32 data)
+{
+ __raw_writel(data, &npe->regs->exec_data);
+ __raw_writel(addr, &npe->regs->exec_addr);
+ __raw_writel(cmd, &npe->regs->exec_status_cmd);
+}
+
+static u32 npe_cmd_read(struct npe *npe, u32 addr, int cmd)
+{
+ __raw_writel(addr, &npe->regs->exec_addr);
+ __raw_writel(cmd, &npe->regs->exec_status_cmd);
+ /* Iintroduce extra read cycles after issuing read command to NPE
+ so that we read the register after the NPE has updated it.
+ This is to overcome race condition between XScale and NPE */
+ __raw_readl(&npe->regs->exec_data);
+ __raw_readl(&npe->regs->exec_data);
+ return __raw_readl(&npe->regs->exec_data);
+}
+
+static void npe_clear_active(struct npe *npe, u32 reg)
+{
+ u32 val = npe_cmd_read(npe, reg, CMD_RD_ECS_REG);
+ npe_cmd_write(npe, reg, CMD_WR_ECS_REG, val & ~ECS_REG_0_ACTIVE);
+}
+
+static void npe_start(struct npe *npe)
+{
+ /* ensure only Background Context Stack Level is active */
+ npe_clear_active(npe, ECS_PRI_1_CTXT_REG_0);
+ npe_clear_active(npe, ECS_PRI_2_CTXT_REG_0);
+ npe_clear_active(npe, ECS_DBG_CTXT_REG_0);
+
+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
+ __raw_writel(CMD_NPE_START, &npe->regs->exec_status_cmd);
+}
+
+static void npe_stop(struct npe *npe)
+{
+ __raw_writel(CMD_NPE_STOP, &npe->regs->exec_status_cmd);
+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); /*FIXME?*/
+}
+
+static int __must_check npe_debug_instr(struct npe *npe, u32 instr, u32 ctx,
+ u32 ldur)
+{
+ u32 wc;
+ int i;
+
+ /* set the Active bit, and the LDUR, in the debug level */
+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG,
+ ECS_REG_0_ACTIVE | (ldur << ECS_REG_0_LDUR_BITS));
+
+ /* set CCTXT at ECS DEBUG L3 to specify in which context to execute
+ the instruction, and set SELCTXT at ECS DEBUG Level to specify
+ which context store to access.
+ Debug ECS Level Reg 1 has form 0x000n000n, where n = context number
+ */
+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_1, CMD_WR_ECS_REG,
+ (ctx << ECS_REG_1_CCTXT_BITS) |
+ (ctx << ECS_REG_1_SELCTXT_BITS));
+
+ /* clear the pipeline */
+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
+
+ /* load NPE instruction into the instruction register */
+ npe_cmd_write(npe, ECS_INSTRUCT_REG, CMD_WR_ECS_REG, instr);
+
+ /* we need this value later to wait for completion of NPE execution
+ step */
+ wc = __raw_readl(&npe->regs->watch_count);
+
+ /* issue a Step One command via the Execution Control register */
+ __raw_writel(CMD_NPE_STEP, &npe->regs->exec_status_cmd);
+
+ /* Watch Count register increments when NPE completes an instruction */
+ for (i = 0; i < MAX_RETRIES; i++) {
+ if (wc != __raw_readl(&npe->regs->watch_count))
+ return 0;
+ udelay(1);
+ }
+
+ print_npe(KERN_ERR, npe, "reset: npe_debug_instr(): timeout\n");
+ return -ETIMEDOUT;
+}
+
+static int __must_check npe_logical_reg_write8(struct npe *npe, u32 addr,
+ u8 val, u32 ctx)
+{
+ /* here we build the NPE assembler instruction: mov8 d0, #0 */
+ u32 instr = INSTR_WR_REG_BYTE | /* OpCode */
+ addr << 9 | /* base Operand */
+ (val & 0x1F) << 4 | /* lower 5 bits to immediate data */
+ (val & ~0x1F) << (18 - 5);/* higher 3 bits to CoProc instr. */
+ return npe_debug_instr(npe, instr, ctx, 1); /* execute it */
+}
+
+static int __must_check npe_logical_reg_write16(struct npe *npe, u32 addr,
+ u16 val, u32 ctx)
+{
+ /* here we build the NPE assembler instruction: mov16 d0, #0 */
+ u32 instr = INSTR_WR_REG_SHORT | /* OpCode */
+ addr << 9 | /* base Operand */
+ (val & 0x1F) << 4 | /* lower 5 bits to immediate data */
+ (val & ~0x1F) << (18 - 5);/* higher 11 bits to CoProc instr. */
+ return npe_debug_instr(npe, instr, ctx, 1); /* execute it */
+}
+
+static int __must_check npe_logical_reg_write32(struct npe *npe, u32 addr,
+ u32 val, u32 ctx)
+{
+ /* write in 16 bit steps first the high and then the low value */
+ if (npe_logical_reg_write16(npe, addr, val >> 16, ctx))
+ return -ETIMEDOUT;
+ return npe_logical_reg_write16(npe, addr + 2, val & 0xFFFF, ctx);
+}
+
+static int npe_reset(struct npe *npe)
+{
+ u32 val, ctl, exec_count, ctx_reg2;
+ int i;
+
+ ctl = (__raw_readl(&npe->regs->messaging_control) | 0x3F000000) &
+ 0x3F3FFFFF;
+
+ /* disable parity interrupt */
+ __raw_writel(ctl & 0x3F00FFFF, &npe->regs->messaging_control);
+
+ /* pre exec - debug instruction */
+ /* turn off the halt bit by clearing Execution Count register. */
+ exec_count = __raw_readl(&npe->regs->exec_count);
+ __raw_writel(0, &npe->regs->exec_count);
+ /* ensure that IF and IE are on (temporarily), so that we don't end up
+ stepping forever */
+ ctx_reg2 = npe_cmd_read(npe, ECS_DBG_CTXT_REG_2, CMD_RD_ECS_REG);
+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2 |
+ ECS_DBG_REG_2_IF | ECS_DBG_REG_2_IE);
+
+ /* clear the FIFOs */
+ while (__raw_readl(&npe->regs->watchpoint_fifo) & WFIFO_VALID)
+ ;
+ while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE)
+ /* read from the outFIFO until empty */
+ print_npe(KERN_DEBUG, npe, "npe_reset: read FIFO = 0x%X\n",
+ __raw_readl(&npe->regs->in_out_fifo));
+
+ while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)
+ /* step execution of the NPE intruction to read inFIFO using
+ the Debug Executing Context stack */
+ if (npe_debug_instr(npe, INSTR_RD_FIFO, 0, 0))
+ return -ETIMEDOUT;
+
+ /* reset the mailbox reg from the XScale side */
+ __raw_writel(RESET_MBOX_STAT, &npe->regs->mailbox_status);
+ /* from NPE side */
+ if (npe_debug_instr(npe, INSTR_RESET_MBOX, 0, 0))
+ return -ETIMEDOUT;
+
+ /* Reset the physical registers in the NPE register file */
+ for (val = 0; val < NPE_PHYS_REG; val++) {
+ if (npe_logical_reg_write16(npe, NPE_REGMAP, val >> 1, 0))
+ return -ETIMEDOUT;
+ /* address is either 0 or 4 */
+ if (npe_logical_reg_write32(npe, (val & 1) * 4, 0, 0))
+ return -ETIMEDOUT;
+ }
+
+ /* Reset the context store = each context's Context Store registers */
+
+ /* Context 0 has no STARTPC. Instead, this value is used to set NextPC
+ for Background ECS, to set where NPE starts executing code */
+ val = npe_cmd_read(npe, ECS_BG_CTXT_REG_0, CMD_RD_ECS_REG);
+ val &= ~ECS_REG_0_NEXTPC_MASK;
+ val |= (0 /* NextPC */ << 16) & ECS_REG_0_NEXTPC_MASK;
+ npe_cmd_write(npe, ECS_BG_CTXT_REG_0, CMD_WR_ECS_REG, val);
+
+ for (i = 0; i < 16; i++) {
+ if (i) { /* Context 0 has no STEVT nor STARTPC */
+ /* STEVT = off, 0x80 */
+ if (npe_logical_reg_write8(npe, NPE_STEVT, 0x80, i))
+ return -ETIMEDOUT;
+ if (npe_logical_reg_write16(npe, NPE_STARTPC, 0, i))
+ return -ETIMEDOUT;
+ }
+ /* REGMAP = d0->p0, d8->p2, d16->p4 */
+ if (npe_logical_reg_write16(npe, NPE_REGMAP, 0x820, i))
+ return -ETIMEDOUT;
+ if (npe_logical_reg_write8(npe, NPE_CINDEX, 0, i))
+ return -ETIMEDOUT;
+ }
+
+ /* post exec */
+ /* clear active bit in debug level */
+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG, 0);
+ /* clear the pipeline */
+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
+ /* restore previous values */
+ __raw_writel(exec_count, &npe->regs->exec_count);
+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2);
+
+ /* write reset values to Execution Context Stack registers */
+ for (val = 0; val < ARRAY_SIZE(ecs_reset); val++)
+ npe_cmd_write(npe, ecs_reset[val].reg, CMD_WR_ECS_REG,
+ ecs_reset[val].val);
+
+ /* clear the profile counter */
+ __raw_writel(CMD_CLR_PROFILE_CNT, &npe->regs->exec_status_cmd);
+
+ __raw_writel(0, &npe->regs->exec_count);
+ __raw_writel(0, &npe->regs->action_points[0]);
+ __raw_writel(0, &npe->regs->action_points[1]);
+ __raw_writel(0, &npe->regs->action_points[2]);
+ __raw_writel(0, &npe->regs->action_points[3]);
+ __raw_writel(0, &npe->regs->watch_count);
+
+ val = ixp4xx_read_feature_bits();
+ /* reset the NPE */
+ ixp4xx_write_feature_bits(val &
+ ~(IXP4XX_FEATURE_RESET_NPEA << npe->id));
+ for (i = 0; i < MAX_RETRIES; i++) {
+ if (!(ixp4xx_read_feature_bits() &
+ (IXP4XX_FEATURE_RESET_NPEA << npe->id)))
+ break; /* reset completed */
+ udelay(1);
+ }
+ if (i == MAX_RETRIES)
+ return -ETIMEDOUT;
+
+ /* deassert reset */
+ ixp4xx_write_feature_bits(val |
+ (IXP4XX_FEATURE_RESET_NPEA << npe->id));
+ for (i = 0; i < MAX_RETRIES; i++) {
+ if (ixp4xx_read_feature_bits() &
+ (IXP4XX_FEATURE_RESET_NPEA << npe->id))
+ break; /* NPE is back alive */
+ udelay(1);
+ }
+ if (i == MAX_RETRIES)
+ return -ETIMEDOUT;
+
+ npe_stop(npe);
+
+ /* restore NPE configuration bus Control Register - parity settings */
+ __raw_writel(ctl, &npe->regs->messaging_control);
+ return 0;
+}
+
+
+int npe_send_message(struct npe *npe, const void *msg, const char *what)
+{
+ const u32 *send = msg;
+ int cycles = 0;
+
+ debug_msg(npe, "Trying to send message %s [%08X:%08X]\n",
+ what, send[0], send[1]);
+
+ if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE) {
+ debug_msg(npe, "NPE input FIFO not empty\n");
+ return -EIO;
+ }
+
+ __raw_writel(send[0], &npe->regs->in_out_fifo);
+
+ if (!(__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNF)) {
+ debug_msg(npe, "NPE input FIFO full\n");
+ return -EIO;
+ }
+
+ __raw_writel(send[1], &npe->regs->in_out_fifo);
+
+ while ((cycles < MAX_RETRIES) &&
+ (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)) {
+ udelay(1);
+ cycles++;
+ }
+
+ if (cycles == MAX_RETRIES) {
+ debug_msg(npe, "Timeout sending message\n");
+ return -ETIMEDOUT;
+ }
+
+ debug_msg(npe, "Sending a message took %i cycles\n", cycles);
+ return 0;
+}
+
+int npe_recv_message(struct npe *npe, void *msg, const char *what)
+{
+ u32 *recv = msg;
+ int cycles = 0, cnt = 0;
+
+ debug_msg(npe, "Trying to receive message %s\n", what);
+
+ while (cycles < MAX_RETRIES) {
+ if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE) {
+ recv[cnt++] = __raw_readl(&npe->regs->in_out_fifo);
+ if (cnt == 2)
+ break;
+ } else {
+ udelay(1);
+ cycles++;
+ }
+ }
+
+ switch(cnt) {
+ case 1:
+ debug_msg(npe, "Received [%08X]\n", recv[0]);
+ break;
+ case 2:
+ debug_msg(npe, "Received [%08X:%08X]\n", recv[0], recv[1]);
+ break;
+ }
+
+ if (cycles == MAX_RETRIES) {
+ debug_msg(npe, "Timeout waiting for message\n");
+ return -ETIMEDOUT;
+ }
+
+ debug_msg(npe, "Receiving a message took %i cycles\n", cycles);
+ return 0;
+}
+
+int npe_send_recv_message(struct npe *npe, void *msg, const char *what)
+{
+ int result;
+ u32 *send = msg, recv[2];
+
+ if ((result = npe_send_message(npe, msg, what)) != 0)
+ return result;
+ if ((result = npe_recv_message(npe, recv, what)) != 0)
+ return result;
+
+ if ((recv[0] != send[0]) || (recv[1] != send[1])) {
+ debug_msg(npe, "Message %s: unexpected message received\n",
+ what);
+ return -EIO;
+ }
+ return 0;
+}
+
+
+int npe_load_firmware(struct npe *npe, const char *name, struct device *dev)
+{
+ const struct firmware *fw_entry;
+
+ struct dl_block {
+ u32 type;
+ u32 offset;
+ } *blk;
+
+ struct dl_image {
+ u32 magic;
+ u32 id;
+ u32 size;
+ union {
+ u32 data[0];
+ struct dl_block blocks[0];
+ };
+ } *image;
+
+ struct dl_codeblock {
+ u32 npe_addr;
+ u32 size;
+ u32 data[0];
+ } *cb;
+
+ int i, j, err, data_size, instr_size, blocks, table_end;
+ u32 cmd;
+
+ if ((err = request_firmware(&fw_entry, name, dev)) != 0)
+ return err;
+
+ err = -EINVAL;
+ if (fw_entry->size < sizeof(struct dl_image)) {
+ print_npe(KERN_ERR, npe, "incomplete firmware file\n");
+ goto err;
+ }
+ image = (struct dl_image*)fw_entry->data;
+
+#if DEBUG_FW
+ print_npe(KERN_DEBUG, npe, "firmware: %08X %08X %08X (0x%X bytes)\n",
+ image->magic, image->id, image->size, image->size * 4);
+#endif
+
+ if (image->magic == swab32(FW_MAGIC)) { /* swapped file */
+ image->id = swab32(image->id);
+ image->size = swab32(image->size);
+ } else if (image->magic != FW_MAGIC) {
+ print_npe(KERN_ERR, npe, "bad firmware file magic: 0x%X\n",
+ image->magic);
+ goto err;
+ }
+ if ((image->size * 4 + sizeof(struct dl_image)) != fw_entry->size) {
+ print_npe(KERN_ERR, npe,
+ "inconsistent size of firmware file\n");
+ goto err;
+ }
+ if (((image->id >> 24) & 0xF /* NPE ID */) != npe->id) {
+ print_npe(KERN_ERR, npe, "firmware file NPE ID mismatch\n");
+ goto err;
+ }
+ if (image->magic == swab32(FW_MAGIC))
+ for (i = 0; i < image->size; i++)
+ image->data[i] = swab32(image->data[i]);
+
+ if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xF /* device ID */)) {
+ print_npe(KERN_INFO, npe, "IXP46x firmware ignored on "
+ "IXP42x\n");
+ goto err;
+ }
+
+ if (npe_running(npe)) {
+ print_npe(KERN_INFO, npe, "unable to load firmware, NPE is "
+ "already running\n");
+ err = -EBUSY;
+ goto err;
+ }
+#if 0
+ npe_stop(npe);
+ npe_reset(npe);
+#endif
+
+ print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
+ "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
+ (image->id >> 8) & 0xFF, image->id & 0xFF);
+
+ if (!cpu_is_ixp46x()) {
+ if (!npe->id)
+ instr_size = NPE_A_42X_INSTR_SIZE;
+ else
+ instr_size = NPE_B_AND_C_42X_INSTR_SIZE;
+ data_size = NPE_42X_DATA_SIZE;
+ } else {
+ instr_size = NPE_46X_INSTR_SIZE;
+ data_size = NPE_46X_DATA_SIZE;
+ }
+
+ for (blocks = 0; blocks * sizeof(struct dl_block) / 4 < image->size;
+ blocks++)
+ if (image->blocks[blocks].type == FW_BLOCK_TYPE_EOF)
+ break;
+ if (blocks * sizeof(struct dl_block) / 4 >= image->size) {
+ print_npe(KERN_INFO, npe, "firmware EOF block marker not "
+ "found\n");
+ goto err;
+ }
+
+#if DEBUG_FW
+ print_npe(KERN_DEBUG, npe, "%i firmware blocks found\n", blocks);
+#endif
+
+ table_end = blocks * sizeof(struct dl_block) / 4 + 1 /* EOF marker */;
+ for (i = 0, blk = image->blocks; i < blocks; i++, blk++) {
+ if (blk->offset > image->size - sizeof(struct dl_codeblock) / 4
+ || blk->offset < table_end) {
+ print_npe(KERN_INFO, npe, "invalid offset 0x%X of "
+ "firmware block #%i\n", blk->offset, i);
+ goto err;
+ }
+
+ cb = (struct dl_codeblock*)&image->data[blk->offset];
+ if (blk->type == FW_BLOCK_TYPE_INSTR) {
+ if (cb->npe_addr + cb->size > instr_size)
+ goto too_big;
+ cmd = CMD_WR_INS_MEM;
+ } else if (blk->type == FW_BLOCK_TYPE_DATA) {
+ if (cb->npe_addr + cb->size > data_size)
+ goto too_big;
+ cmd = CMD_WR_DATA_MEM;
+ } else {
+ print_npe(KERN_INFO, npe, "invalid firmware block #%i "
+ "type 0x%X\n", i, blk->type);
+ goto err;
+ }
+ if (blk->offset + sizeof(*cb) / 4 + cb->size > image->size) {
+ print_npe(KERN_INFO, npe, "firmware block #%i doesn't "
+ "fit in firmware image: type %c, start 0x%X,"
+ " length 0x%X\n", i,
+ blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
+ cb->npe_addr, cb->size);
+ goto err;
+ }
+
+ for (j = 0; j < cb->size; j++)
+ npe_cmd_write(npe, cb->npe_addr + j, cmd, cb->data[j]);
+ }
+
+ npe_start(npe);
+ if (!npe_running(npe))
+ print_npe(KERN_ERR, npe, "unable to start\n");
+ release_firmware(fw_entry);
+ return 0;
+
+too_big:
+ print_npe(KERN_INFO, npe, "firmware block #%i doesn't fit in NPE "
+ "memory: type %c, start 0x%X, length 0x%X\n", i,
+ blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
+ cb->npe_addr, cb->size);
+err:
+ release_firmware(fw_entry);
+ return err;
+}
+
+
+struct npe *npe_request(int id)
+{
+ if (id < NPE_COUNT)
+ if (npe_tab[id].valid)
+ if (try_module_get(THIS_MODULE))
+ return &npe_tab[id];
+ return NULL;
+}
+
+void npe_release(struct npe *npe)
+{
+ module_put(THIS_MODULE);
+}
+
+
+static int __init npe_init_module(void)
+{
+
+ int i, found = 0;
+
+ for (i = 0; i < NPE_COUNT; i++) {
+ struct npe *npe = &npe_tab[i];
+ if (!(ixp4xx_read_feature_bits() &
+ (IXP4XX_FEATURE_RESET_NPEA << i)))
+ continue; /* NPE already disabled or not present */
+ if (!(npe->mem_res = request_mem_region(npe->regs_phys,
+ REGS_SIZE,
+ npe_name(npe)))) {
+ print_npe(KERN_ERR, npe,
+ "failed to request memory region\n");
+ continue;
+ }
+
+ if (npe_reset(npe))
+ continue;
+ npe->valid = 1;
+ found++;
+ }
+
+ if (!found)
+ return -ENOSYS;
+ return 0;
+}
+
+static void __exit npe_cleanup_module(void)
+{
+ int i;
+
+ for (i = 0; i < NPE_COUNT; i++)
+ if (npe_tab[i].mem_res) {
+ npe_reset(&npe_tab[i]);
+ release_resource(npe_tab[i].mem_res);
+ }
+}
+
+module_init(npe_init_module);
+module_exit(npe_cleanup_module);
+
+MODULE_AUTHOR("Krzysztof Halasa");
+MODULE_LICENSE("GPL v2");
+
+EXPORT_SYMBOL(npe_names);
+EXPORT_SYMBOL(npe_running);
+EXPORT_SYMBOL(npe_request);
+EXPORT_SYMBOL(npe_release);
+EXPORT_SYMBOL(npe_load_firmware);
+EXPORT_SYMBOL(npe_send_message);
+EXPORT_SYMBOL(npe_recv_message);
+EXPORT_SYMBOL(npe_send_recv_message);
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
new file mode 100644
index 000000000000..e83301325301
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
@@ -0,0 +1,274 @@
+/*
+ * Intel IXP4xx Queue Manager driver for Linux
+ *
+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/arch/qmgr.h>
+
+#define DEBUG 0
+
+struct qmgr_regs __iomem *qmgr_regs;
+static struct resource *mem_res;
+static spinlock_t qmgr_lock;
+static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
+static void (*irq_handlers[HALF_QUEUES])(void *pdev);
+static void *irq_pdevs[HALF_QUEUES];
+
+void qmgr_set_irq(unsigned int queue, int src,
+ void (*handler)(void *pdev), void *pdev)
+{
+ u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */
+ int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
+ unsigned long flags;
+
+ src &= 7;
+ spin_lock_irqsave(&qmgr_lock, flags);
+ __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg);
+ irq_handlers[queue] = handler;
+ irq_pdevs[queue] = pdev;
+ spin_unlock_irqrestore(&qmgr_lock, flags);
+}
+
+
+static irqreturn_t qmgr_irq1(int irq, void *pdev)
+{
+ int i;
+ u32 val = __raw_readl(&qmgr_regs->irqstat[0]);
+ __raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */
+
+ for (i = 0; i < HALF_QUEUES; i++)
+ if (val & (1 << i))
+ irq_handlers[i](irq_pdevs[i]);
+
+ return val ? IRQ_HANDLED : 0;
+}
+
+
+void qmgr_enable_irq(unsigned int queue)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&qmgr_lock, flags);
+ __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue),
+ &qmgr_regs->irqen[0]);
+ spin_unlock_irqrestore(&qmgr_lock, flags);
+}
+
+void qmgr_disable_irq(unsigned int queue)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&qmgr_lock, flags);
+ __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue),
+ &qmgr_regs->irqen[0]);
+ spin_unlock_irqrestore(&qmgr_lock, flags);
+}
+
+static inline void shift_mask(u32 *mask)
+{
+ mask[3] = mask[3] << 1 | mask[2] >> 31;
+ mask[2] = mask[2] << 1 | mask[1] >> 31;
+ mask[1] = mask[1] << 1 | mask[0] >> 31;
+ mask[0] <<= 1;
+}
+
+int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
+ unsigned int nearly_empty_watermark,
+ unsigned int nearly_full_watermark)
+{
+ u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
+ int err;
+
+ if (queue >= HALF_QUEUES)
+ return -ERANGE;
+
+ if ((nearly_empty_watermark | nearly_full_watermark) & ~7)
+ return -EINVAL;
+
+ switch (len) {
+ case 16:
+ cfg = 0 << 24;
+ mask[0] = 0x1;
+ break;
+ case 32:
+ cfg = 1 << 24;
+ mask[0] = 0x3;
+ break;
+ case 64:
+ cfg = 2 << 24;
+ mask[0] = 0xF;
+ break;
+ case 128:
+ cfg = 3 << 24;
+ mask[0] = 0xFF;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ cfg |= nearly_empty_watermark << 26;
+ cfg |= nearly_full_watermark << 29;
+ len /= 16; /* in 16-dwords: 1, 2, 4 or 8 */
+ mask[1] = mask[2] = mask[3] = 0;
+
+ if (!try_module_get(THIS_MODULE))
+ return -ENODEV;
+
+ spin_lock_irq(&qmgr_lock);
+ if (__raw_readl(&qmgr_regs->sram[queue])) {
+ err = -EBUSY;
+ goto err;
+ }
+
+ while (1) {
+ if (!(used_sram_bitmap[0] & mask[0]) &&
+ !(used_sram_bitmap[1] & mask[1]) &&
+ !(used_sram_bitmap[2] & mask[2]) &&
+ !(used_sram_bitmap[3] & mask[3]))
+ break; /* found free space */
+
+ addr++;
+ shift_mask(mask);
+ if (addr + len > ARRAY_SIZE(qmgr_regs->sram)) {
+ printk(KERN_ERR "qmgr: no free SRAM space for"
+ " queue %i\n", queue);
+ err = -ENOMEM;
+ goto err;
+ }
+ }
+
+ used_sram_bitmap[0] |= mask[0];
+ used_sram_bitmap[1] |= mask[1];
+ used_sram_bitmap[2] |= mask[2];
+ used_sram_bitmap[3] |= mask[3];
+ __raw_writel(cfg | (addr << 14), &qmgr_regs->sram[queue]);
+ spin_unlock_irq(&qmgr_lock);
+
+#if DEBUG
+ printk(KERN_DEBUG "qmgr: requested queue %i, addr = 0x%02X\n",
+ queue, addr);
+#endif
+ return 0;
+
+err:
+ spin_unlock_irq(&qmgr_lock);
+ module_put(THIS_MODULE);
+ return err;
+}
+
+void qmgr_release_queue(unsigned int queue)
+{
+ u32 cfg, addr, mask[4];
+
+ BUG_ON(queue >= HALF_QUEUES); /* not in valid range */
+
+ spin_lock_irq(&qmgr_lock);
+ cfg = __raw_readl(&qmgr_regs->sram[queue]);
+ addr = (cfg >> 14) & 0xFF;
+
+ BUG_ON(!addr); /* not requested */
+
+ switch ((cfg >> 24) & 3) {
+ case 0: mask[0] = 0x1; break;
+ case 1: mask[0] = 0x3; break;
+ case 2: mask[0] = 0xF; break;
+ case 3: mask[0] = 0xFF; break;
+ }
+
+ while (addr--)
+ shift_mask(mask);
+
+ __raw_writel(0, &qmgr_regs->sram[queue]);
+
+ used_sram_bitmap[0] &= ~mask[0];
+ used_sram_bitmap[1] &= ~mask[1];
+ used_sram_bitmap[2] &= ~mask[2];
+ used_sram_bitmap[3] &= ~mask[3];
+ irq_handlers[queue] = NULL; /* catch IRQ bugs */
+ spin_unlock_irq(&qmgr_lock);
+
+ module_put(THIS_MODULE);
+#if DEBUG
+ printk(KERN_DEBUG "qmgr: released queue %i\n", queue);
+#endif
+}
+
+static int qmgr_init(void)
+{
+ int i, err;
+ mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS,
+ IXP4XX_QMGR_REGION_SIZE,
+ "IXP4xx Queue Manager");
+ if (mem_res == NULL)
+ return -EBUSY;
+
+ qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
+ if (qmgr_regs == NULL) {
+ err = -ENOMEM;
+ goto error_map;
+ }
+
+ /* reset qmgr registers */
+ for (i = 0; i < 4; i++) {
+ __raw_writel(0x33333333, &qmgr_regs->stat1[i]);
+ __raw_writel(0, &qmgr_regs->irqsrc[i]);
+ }
+ for (i = 0; i < 2; i++) {
+ __raw_writel(0, &qmgr_regs->stat2[i]);
+ __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[i]); /* clear */
+ __raw_writel(0, &qmgr_regs->irqen[i]);
+ }
+
+ for (i = 0; i < QUEUES; i++)
+ __raw_writel(0, &qmgr_regs->sram[i]);
+
+ err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0,
+ "IXP4xx Queue Manager", NULL);
+ if (err) {
+ printk(KERN_ERR "qmgr: failed to request IRQ%i\n",
+ IRQ_IXP4XX_QM1);
+ goto error_irq;
+ }
+
+ used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */
+ spin_lock_init(&qmgr_lock);
+
+ printk(KERN_INFO "IXP4xx Queue Manager initialized.\n");
+ return 0;
+
+error_irq:
+ iounmap(qmgr_regs);
+error_map:
+ release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
+ return err;
+}
+
+static void qmgr_remove(void)
+{
+ free_irq(IRQ_IXP4XX_QM1, NULL);
+ synchronize_irq(IRQ_IXP4XX_QM1);
+ iounmap(qmgr_regs);
+ release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
+}
+
+module_init(qmgr_init);
+module_exit(qmgr_remove);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Krzysztof Halasa");
+
+EXPORT_SYMBOL(qmgr_regs);
+EXPORT_SYMBOL(qmgr_set_irq);
+EXPORT_SYMBOL(qmgr_enable_irq);
+EXPORT_SYMBOL(qmgr_disable_irq);
+EXPORT_SYMBOL(qmgr_request_queue);
+EXPORT_SYMBOL(qmgr_release_queue);
diff --git a/arch/arm/mach-ixp4xx/nas100d-power.c b/arch/arm/mach-ixp4xx/nas100d-power.c
deleted file mode 100644
index 29aa98d3a7fa..000000000000
--- a/arch/arm/mach-ixp4xx/nas100d-power.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/nas100d-power.c
- *
- * NAS 100d Power/Reset driver
- *
- * Copyright (C) 2005 Tower Technologies
- *
- * based on nas100d-io.c
- * Copyright (C) 2004 Karen Spearel
- *
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- * Maintainers: http://www.nslu2-linux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-#include <linux/reboot.h>
-
-#include <asm/mach-types.h>
-
-static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
-{
- /* Signal init to do the ctrlaltdel action, this will bypass init if
- * it hasn't started and do a kernel_restart.
- */
- ctrl_alt_del();
-
- return IRQ_HANDLED;
-}
-
-static int __init nas100d_power_init(void)
-{
- if (!(machine_is_nas100d()))
- return 0;
-
- set_irq_type(NAS100D_RB_IRQ, IRQT_LOW);
-
- if (request_irq(NAS100D_RB_IRQ, &nas100d_reset_handler,
- IRQF_DISABLED, "NAS100D reset button", NULL) < 0) {
-
- printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
- NAS100D_RB_IRQ);
-
- return -EIO;
- }
-
- return 0;
-}
-
-static void __exit nas100d_power_exit(void)
-{
- if (!(machine_is_nas100d()))
- return;
-
- free_irq(NAS100D_RB_IRQ, NULL);
-}
-
-module_init(nas100d_power_init);
-module_exit(nas100d_power_exit);
-
-MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-MODULE_DESCRIPTION("NAS100D Power/Reset driver");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 78a17413ceca..4cecae84837b 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -3,8 +3,14 @@
*
* NAS 100d board-setup
*
- * based ixdp425-setup.c:
+ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
+ *
+ * based on ixdp425-setup.c:
* Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * based on nas100d-power.c:
+ * Copyright (C) 2005 Tower Technologies
+ * based on nas100d-io.c
+ * Copyright (C) 2004 Karen Spearel
*
* Author: Alessandro Zummo <a.zummo@towertech.it>
* Author: Rod Whitby <rod@whitby.id.au>
@@ -12,14 +18,22 @@
*
*/
-#include <linux/kernel.h>
+#include <linux/if_ether.h>
+#include <linux/irq.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/leds.h>
+#include <linux/reboot.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
static struct flash_platform_data nas100d_flash_data = {
.map_name = "cfi_probe",
@@ -38,46 +52,52 @@ static struct platform_device nas100d_flash = {
.resource = &nas100d_flash_resource,
};
-#ifdef CONFIG_LEDS_IXP4XX
-static struct resource nas100d_led_resources[] = {
+static struct i2c_board_info __initdata nas100d_i2c_board_info [] = {
+ {
+ I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+ },
+};
+
+static struct gpio_led nas100d_led_pins[] = {
{
.name = "wlan", /* green led */
- .start = 0,
- .end = 0,
- .flags = IXP4XX_GPIO_LOW,
+ .gpio = NAS100D_LED_WLAN_GPIO,
+ .active_low = true,
},
{
- .name = "ready", /* blue power led (off is flashing!) */
- .start = 15,
- .end = 15,
- .flags = IXP4XX_GPIO_LOW,
+ .name = "power", /* blue power led (off=flashing) */
+ .gpio = NAS100D_LED_PWR_GPIO,
+ .active_low = true,
},
{
.name = "disk", /* yellow led */
- .start = 3,
- .end = 3,
- .flags = IXP4XX_GPIO_LOW,
+ .gpio = NAS100D_LED_DISK_GPIO,
+ .active_low = true,
},
};
+static struct gpio_led_platform_data nas100d_led_data = {
+ .num_leds = ARRAY_SIZE(nas100d_led_pins),
+ .leds = nas100d_led_pins,
+};
+
static struct platform_device nas100d_leds = {
- .name = "IXP4XX-GPIO-LED",
+ .name = "leds-gpio",
.id = -1,
- .num_resources = ARRAY_SIZE(nas100d_led_resources),
- .resource = nas100d_led_resources,
+ .dev.platform_data = &nas100d_led_data,
};
-#endif
-static struct ixp4xx_i2c_pins nas100d_i2c_gpio_pins = {
+static struct i2c_gpio_platform_data nas100d_i2c_gpio_data = {
.sda_pin = NAS100D_SDA_PIN,
.scl_pin = NAS100D_SCL_PIN,
};
-static struct platform_device nas100d_i2c_controller = {
- .name = "IXP4XX-I2C",
+static struct platform_device nas100d_i2c_gpio = {
+ .name = "i2c-gpio",
.id = 0,
- .dev.platform_data = &nas100d_i2c_gpio_pins,
- .num_resources = 0,
+ .dev = {
+ .platform_data = &nas100d_i2c_gpio_data,
+ },
};
static struct resource nas100d_uart_resources[] = {
@@ -123,12 +143,28 @@ static struct platform_device nas100d_uart = {
.resource = nas100d_uart_resources,
};
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info nas100d_plat_eth[] = {
+ {
+ .phy = 0,
+ .rxq = 3,
+ .txreadyq = 20,
+ }
+};
+
+static struct platform_device nas100d_eth[] = {
+ {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEB,
+ .dev.platform_data = nas100d_plat_eth,
+ }
+};
+
static struct platform_device *nas100d_devices[] __initdata = {
- &nas100d_i2c_controller,
+ &nas100d_i2c_gpio,
&nas100d_flash,
-#ifdef CONFIG_LEDS_IXP4XX
&nas100d_leds,
-#endif
+ &nas100d_eth[0],
};
static void nas100d_power_off(void)
@@ -142,8 +178,63 @@ static void nas100d_power_off(void)
gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH);
}
+/* This is used to make sure the power-button pusher is serious. The button
+ * must be held until the value of this counter reaches zero.
+ */
+static int power_button_countdown;
+
+/* Must hold the button down for at least this many counts to be processed */
+#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
+
+static void nas100d_power_handler(unsigned long data);
+static DEFINE_TIMER(nas100d_power_timer, nas100d_power_handler, 0, 0);
+
+static void nas100d_power_handler(unsigned long data)
+{
+ /* This routine is called twice per second to check the
+ * state of the power button.
+ */
+
+ if (gpio_get_value(NAS100D_PB_GPIO)) {
+
+ /* IO Pin is 1 (button pushed) */
+ if (power_button_countdown > 0)
+ power_button_countdown--;
+
+ } else {
+
+ /* Done on button release, to allow for auto-power-on mods. */
+ if (power_button_countdown == 0) {
+ /* Signal init to do the ctrlaltdel action,
+ * this will bypass init if it hasn't started
+ * and do a kernel_restart.
+ */
+ ctrl_alt_del();
+
+ /* Change the state of the power LED to "blink" */
+ gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
+ } else {
+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+ }
+ }
+
+ mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
+}
+
+static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
+{
+ /* This is the paper-clip reset, it shuts the machine down directly. */
+ machine_power_off();
+
+ return IRQ_HANDLED;
+}
+
static void __init nas100d_init(void)
{
+ DECLARE_MAC_BUF(mac_buf);
+ uint8_t __iomem *f;
+ int i;
+
ixp4xx_sys_init();
/* gpio 14 and 15 are _not_ clocks */
@@ -153,7 +244,8 @@ static void __init nas100d_init(void)
nas100d_flash_resource.end =
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
- pm_power_off = nas100d_power_off;
+ i2c_register_board_info(0, nas100d_i2c_board_info,
+ ARRAY_SIZE(nas100d_i2c_board_info));
/*
* This is only useful on a modified machine, but it is valuable
@@ -163,6 +255,48 @@ static void __init nas100d_init(void)
(void)platform_device_register(&nas100d_uart);
platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
+
+ pm_power_off = nas100d_power_off;
+
+ if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
+ IRQF_DISABLED | IRQF_TRIGGER_LOW,
+ "NAS100D reset button", NULL) < 0) {
+
+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+ gpio_to_irq(NAS100D_RB_GPIO));
+ }
+
+ /* The power button on the Iomega NAS100d is on GPIO 14, but
+ * it cannot handle interrupts on that GPIO line. So we'll
+ * have to poll it with a kernel timer.
+ */
+
+ /* Make sure that the power button GPIO is set up as an input */
+ gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN);
+
+ /* Set the initial value for the power button IRQ handler */
+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+
+ mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
+
+ /*
+ * Map in a portion of the flash and read the MAC address.
+ * Since it is stored in BE in the flash itself, we need to
+ * byteswap it if we're in LE mode.
+ */
+ f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000);
+ if (f) {
+ for (i = 0; i < 6; i++)
+#ifdef __ARMEB__
+ nas100d_plat_eth[0].hwaddr[i] = readb(f + 0xFC0FD8 + i);
+#else
+ nas100d_plat_eth[0].hwaddr[i] = readb(f + 0xFC0FD8 + (i^3));
+#endif
+ iounmap(f);
+ }
+ printk(KERN_INFO "NAS100D: Using MAC address %s for port 0\n",
+ print_mac(mac_buf, nas100d_plat_eth[0].hwaddr));
+
}
MACHINE_START(NAS100D, "Iomega NAS 100d")
diff --git a/arch/arm/mach-ixp4xx/nslu2-power.c b/arch/arm/mach-ixp4xx/nslu2-power.c
deleted file mode 100644
index acd71e9c38a7..000000000000
--- a/arch/arm/mach-ixp4xx/nslu2-power.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/nslu2-power.c
- *
- * NSLU2 Power/Reset driver
- *
- * Copyright (C) 2005 Tower Technologies
- *
- * based on nslu2-io.c
- * Copyright (C) 2004 Karen Spearel
- *
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- * Maintainers: http://www.nslu2-linux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/reboot.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-
-#include <asm/mach-types.h>
-
-static irqreturn_t nslu2_power_handler(int irq, void *dev_id)
-{
- /* Signal init to do the ctrlaltdel action, this will bypass init if
- * it hasn't started and do a kernel_restart.
- */
- ctrl_alt_del();
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t nslu2_reset_handler(int irq, void *dev_id)
-{
- /* This is the paper-clip reset, it shuts the machine down directly.
- */
- machine_power_off();
-
- return IRQ_HANDLED;
-}
-
-static int __init nslu2_power_init(void)
-{
- if (!(machine_is_nslu2()))
- return 0;
-
- *IXP4XX_GPIO_GPISR = 0x20400000; /* read the 2 irqs to clr */
-
- set_irq_type(NSLU2_RB_IRQ, IRQT_LOW);
- set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH);
-
- if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler,
- IRQF_DISABLED, "NSLU2 reset button", NULL) < 0) {
-
- printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
- NSLU2_RB_IRQ);
-
- return -EIO;
- }
-
- if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler,
- IRQF_DISABLED, "NSLU2 power button", NULL) < 0) {
-
- printk(KERN_DEBUG "Power Button IRQ %d not available\n",
- NSLU2_PB_IRQ);
-
- return -EIO;
- }
-
- return 0;
-}
-
-static void __exit nslu2_power_exit(void)
-{
- if (!(machine_is_nslu2()))
- return;
-
- free_irq(NSLU2_RB_IRQ, NULL);
- free_irq(NSLU2_PB_IRQ, NULL);
-}
-
-module_init(nslu2_power_init);
-module_exit(nslu2_power_exit);
-
-MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-MODULE_DESCRIPTION("NSLU2 Power/Reset driver");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 9bf8ccbcaccf..acaebcbce53a 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -3,26 +3,35 @@
*
* NSLU2 board-setup
*
- * based ixdp425-setup.c:
+ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
+ *
+ * based on ixdp425-setup.c:
* Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * based on nslu2-power.c:
+ * Copyright (C) 2005 Tower Technologies
*
* Author: Mark Rakes <mrakes at mac.com>
* Author: Rod Whitby <rod@whitby.id.au>
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
* Maintainers: http://www.nslu2-linux.org/
*
- * Fixed missing init_time in MACHINE_START kas11 10/22/04
- * Changed to conform to new style __init ixdp425 kas11 10/22/04
*/
-#include <linux/kernel.h>
+#include <linux/if_ether.h>
+#include <linux/irq.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/leds.h>
+#include <linux/reboot.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
static struct flash_platform_data nslu2_flash_data = {
.map_name = "cfi_probe",
@@ -41,52 +50,55 @@ static struct platform_device nslu2_flash = {
.resource = &nslu2_flash_resource,
};
-static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
+static struct i2c_gpio_platform_data nslu2_i2c_gpio_data = {
.sda_pin = NSLU2_SDA_PIN,
.scl_pin = NSLU2_SCL_PIN,
};
-#ifdef CONFIG_LEDS_IXP4XX
-static struct resource nslu2_led_resources[] = {
+static struct i2c_board_info __initdata nslu2_i2c_board_info [] = {
+ {
+ I2C_BOARD_INFO("rtc-x1205", 0x6f),
+ },
+};
+
+static struct gpio_led nslu2_led_pins[] = {
{
.name = "ready", /* green led */
- .start = NSLU2_LED_GRN_GPIO,
- .end = NSLU2_LED_GRN_GPIO,
- .flags = IXP4XX_GPIO_HIGH,
+ .gpio = NSLU2_LED_GRN_GPIO,
},
{
.name = "status", /* red led */
- .start = NSLU2_LED_RED_GPIO,
- .end = NSLU2_LED_RED_GPIO,
- .flags = IXP4XX_GPIO_HIGH,
+ .gpio = NSLU2_LED_RED_GPIO,
},
{
.name = "disk-1",
- .start = NSLU2_LED_DISK1_GPIO,
- .end = NSLU2_LED_DISK1_GPIO,
- .flags = IXP4XX_GPIO_LOW,
+ .gpio = NSLU2_LED_DISK1_GPIO,
+ .active_low = true,
},
{
.name = "disk-2",
- .start = NSLU2_LED_DISK2_GPIO,
- .end = NSLU2_LED_DISK2_GPIO,
- .flags = IXP4XX_GPIO_LOW,
+ .gpio = NSLU2_LED_DISK2_GPIO,
+ .active_low = true,
},
};
+static struct gpio_led_platform_data nslu2_led_data = {
+ .num_leds = ARRAY_SIZE(nslu2_led_pins),
+ .leds = nslu2_led_pins,
+};
+
static struct platform_device nslu2_leds = {
- .name = "IXP4XX-GPIO-LED",
+ .name = "leds-gpio",
.id = -1,
- .num_resources = ARRAY_SIZE(nslu2_led_resources),
- .resource = nslu2_led_resources,
+ .dev.platform_data = &nslu2_led_data,
};
-#endif
-static struct platform_device nslu2_i2c_controller = {
- .name = "IXP4XX-I2C",
+static struct platform_device nslu2_i2c_gpio = {
+ .name = "i2c-gpio",
.id = 0,
- .dev.platform_data = &nslu2_i2c_gpio_pins,
- .num_resources = 0,
+ .dev = {
+ .platform_data = &nslu2_i2c_gpio_data,
+ },
};
static struct platform_device nslu2_beeper = {
@@ -138,13 +150,29 @@ static struct platform_device nslu2_uart = {
.resource = nslu2_uart_resources,
};
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info nslu2_plat_eth[] = {
+ {
+ .phy = 1,
+ .rxq = 3,
+ .txreadyq = 20,
+ }
+};
+
+static struct platform_device nslu2_eth[] = {
+ {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEB,
+ .dev.platform_data = nslu2_plat_eth,
+ }
+};
+
static struct platform_device *nslu2_devices[] __initdata = {
- &nslu2_i2c_controller,
+ &nslu2_i2c_gpio,
&nslu2_flash,
&nslu2_beeper,
-#ifdef CONFIG_LEDS_IXP4XX
&nslu2_leds,
-#endif
+ &nslu2_eth[0],
};
static void nslu2_power_off(void)
@@ -158,6 +186,25 @@ static void nslu2_power_off(void)
gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
}
+static irqreturn_t nslu2_power_handler(int irq, void *dev_id)
+{
+ /* Signal init to do the ctrlaltdel action, this will bypass init if
+ * it hasn't started and do a kernel_restart.
+ */
+ ctrl_alt_del();
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t nslu2_reset_handler(int irq, void *dev_id)
+{
+ /* This is the paper-clip reset, it shuts the machine down directly.
+ */
+ machine_power_off();
+
+ return IRQ_HANDLED;
+}
+
static void __init nslu2_timer_init(void)
{
/* The xtal on this machine is non-standard. */
@@ -173,13 +220,18 @@ static struct sys_timer nslu2_timer = {
static void __init nslu2_init(void)
{
+ DECLARE_MAC_BUF(mac_buf);
+ uint8_t __iomem *f;
+ int i;
+
ixp4xx_sys_init();
nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
nslu2_flash_resource.end =
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
- pm_power_off = nslu2_power_off;
+ i2c_register_board_info(0, nslu2_i2c_board_info,
+ ARRAY_SIZE(nslu2_i2c_board_info));
/*
* This is only useful on a modified machine, but it is valuable
@@ -189,6 +241,43 @@ static void __init nslu2_init(void)
(void)platform_device_register(&nslu2_uart);
platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
+
+ pm_power_off = nslu2_power_off;
+
+ if (request_irq(gpio_to_irq(NSLU2_RB_GPIO), &nslu2_reset_handler,
+ IRQF_DISABLED | IRQF_TRIGGER_LOW,
+ "NSLU2 reset button", NULL) < 0) {
+
+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+ gpio_to_irq(NSLU2_RB_GPIO));
+ }
+
+ if (request_irq(gpio_to_irq(NSLU2_PB_GPIO), &nslu2_power_handler,
+ IRQF_DISABLED | IRQF_TRIGGER_HIGH,
+ "NSLU2 power button", NULL) < 0) {
+
+ printk(KERN_DEBUG "Power Button IRQ %d not available\n",
+ gpio_to_irq(NSLU2_PB_GPIO));
+ }
+
+ /*
+ * Map in a portion of the flash and read the MAC address.
+ * Since it is stored in BE in the flash itself, we need to
+ * byteswap it if we're in LE mode.
+ */
+ f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x40000);
+ if (f) {
+ for (i = 0; i < 6; i++)
+#ifdef __ARMEB__
+ nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + i);
+#else
+ nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + (i^3));
+#endif
+ iounmap(f);
+ }
+ printk(KERN_INFO "NSLU2: Using MAC address %s for port 0\n",
+ print_mac(mac_buf, nslu2_plat_eth[0].hwaddr));
+
}
MACHINE_START(NSLU2, "Linksys NSLU2")
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index 2a07a281fa8a..730a3af12c98 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -9,7 +9,7 @@ obj-n :=
obj- :=
# PCI support is optional
-#obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_PCI) += pci.o
# Board-specific support
obj-$(CONFIG_MACH_KS8695) += board-micrel.o
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 2feeef81d843..05ac2bd04020 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -40,7 +40,7 @@ static void __init micrel_init(void)
printk(KERN_INFO "Micrel KS8695 Development Board initializing\n");
#ifdef CONFIG_PCI
-// ks8695_init_pci(&micrel_pci);
+ ks8695_init_pci(&micrel_pci);
#endif
/* Add devices */
diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c
index b1aa3cb3d4a3..5e46191c0af9 100644
--- a/arch/arm/mach-ks8695/gpio.c
+++ b/arch/arm/mach-ks8695/gpio.c
@@ -20,6 +20,8 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
#include <linux/module.h>
#include <asm/io.h>
@@ -216,3 +218,84 @@ int irq_to_gpio(unsigned int irq)
return (irq - KS8695_IRQ_EXTERN0);
}
EXPORT_SYMBOL(irq_to_gpio);
+
+
+/* .... Debug interface ..................................................... */
+
+#ifdef CONFIG_DEBUG_FS
+
+static int ks8695_gpio_show(struct seq_file *s, void *unused)
+{
+ unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
+ unsigned int intmask[] = { IOPC_IOEINT0TM, IOPC_IOEINT1TM, IOPC_IOEINT2TM, IOPC_IOEINT3TM };
+ unsigned long mode, ctrl, data;
+ int i;
+
+ mode = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+ ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
+ data = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+
+ seq_printf(s, "Pin\tI/O\tFunction\tState\n\n");
+
+ for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) {
+ seq_printf(s, "%i:\t", i);
+
+ seq_printf(s, "%s\t", (mode & IOPM_(i)) ? "Output" : "Input");
+
+ if (i <= KS8695_GPIO_3) {
+ if (ctrl & enable[i]) {
+ seq_printf(s, "EXT%i ", i);
+
+ switch ((ctrl & intmask[i]) >> (4 * i)) {
+ case IOPC_TM_LOW:
+ seq_printf(s, "(Low)"); break;
+ case IOPC_TM_HIGH:
+ seq_printf(s, "(High)"); break;
+ case IOPC_TM_RISING:
+ seq_printf(s, "(Rising)"); break;
+ case IOPC_TM_FALLING:
+ seq_printf(s, "(Falling)"); break;
+ case IOPC_TM_EDGE:
+ seq_printf(s, "(Edges)"); break;
+ }
+ }
+ else
+ seq_printf(s, "GPIO\t");
+ }
+ else if (i <= KS8695_GPIO_5) {
+ if (ctrl & enable[i])
+ seq_printf(s, "TOUT%i\t", i - KS8695_GPIO_4);
+ else
+ seq_printf(s, "GPIO\t");
+ }
+ else
+ seq_printf(s, "GPIO\t");
+
+ seq_printf(s, "\t");
+
+ seq_printf(s, "%i\n", (data & IOPD_(i)) ? 1 : 0);
+ }
+ return 0;
+}
+
+static int ks8695_gpio_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ks8695_gpio_show, NULL);
+}
+
+static const struct file_operations ks8695_gpio_operations = {
+ .open = ks8695_gpio_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init ks8695_gpio_debugfs_init(void)
+{
+ /* /sys/kernel/debug/ks8695_gpio */
+ (void) debugfs_create_file("ks8695_gpio", S_IFREG | S_IRUGO, NULL, NULL, &ks8695_gpio_operations);
+ return 0;
+}
+postcore_initcall(ks8695_gpio_debugfs_init);
+
+#endif
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
new file mode 100644
index 000000000000..3f4e0330cb1a
--- /dev/null
+++ b/arch/arm/mach-ks8695/pci.c
@@ -0,0 +1,326 @@
+/*
+ * arch/arm/mach-ks8695/pci.c
+ *
+ * Copyright (C) 2003, Micrel Semiconductors
+ * Copyright (C) 2006, Greg Ungerer <gerg@snapgear.com>
+ * Copyright (C) 2006, Ben Dooks
+ * Copyright (C) 2007, Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/signal.h>
+#include <asm/mach/pci.h>
+#include <asm/hardware.h>
+
+#include <asm/arch/devices.h>
+#include <asm/arch/regs-pci.h>
+
+
+static int pci_dbg;
+static int pci_cfg_dbg;
+
+
+static void ks8695_pci_setupconfig(unsigned int bus_nr, unsigned int devfn, unsigned int where)
+{
+ unsigned long pbca;
+
+ pbca = PBCA_ENABLE | (where & ~3);
+ pbca |= PCI_SLOT(devfn) << 11 ;
+ pbca |= PCI_FUNC(devfn) << 8;
+ pbca |= bus_nr << 16;
+
+ if (bus_nr == 0) {
+ /* use Type-0 transaction */
+ __raw_writel(pbca, KS8695_PCI_VA + KS8695_PBCA);
+ } else {
+ /* use Type-1 transaction */
+ __raw_writel(pbca | PBCA_TYPE1, KS8695_PCI_VA + KS8695_PBCA);
+ }
+}
+
+
+/*
+ * The KS8695 datasheet prohibits anything other than 32bit accesses
+ * to the IO registers, so all our configuration must be done with
+ * 32bit operations, and the correct bit masking and shifting.
+ */
+
+static int ks8695_pci_readconfig(struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 *value)
+{
+ ks8695_pci_setupconfig(bus->number, devfn, where);
+
+ *value = __raw_readl(KS8695_PCI_VA + KS8695_PBCD);
+
+ switch (size) {
+ case 4:
+ break;
+ case 2:
+ *value = *value >> ((where & 2) * 8);
+ *value &= 0xffff;
+ break;
+ case 1:
+ *value = *value >> ((where & 3) * 8);
+ *value &= 0xff;
+ break;
+ }
+
+ if (pci_cfg_dbg) {
+ printk("read: %d,%08x,%02x,%d: %08x (%08x)\n",
+ bus->number, devfn, where, size, *value,
+ __raw_readl(KS8695_PCI_VA + KS8695_PBCD));
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int ks8695_pci_writeconfig(struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 value)
+{
+ unsigned long tmp;
+
+ if (pci_cfg_dbg) {
+ printk("write: %d,%08x,%02x,%d: %08x\n",
+ bus->number, devfn, where, size, value);
+ }
+
+ ks8695_pci_setupconfig(bus->number, devfn, where);
+
+ switch (size) {
+ case 4:
+ __raw_writel(value, KS8695_PCI_VA + KS8695_PBCD);
+ break;
+ case 2:
+ tmp = __raw_readl(KS8695_PCI_VA + KS8695_PBCD);
+ tmp &= ~(0xffff << ((where & 2) * 8));
+ tmp |= value << ((where & 2) * 8);
+
+ __raw_writel(tmp, KS8695_PCI_VA + KS8695_PBCD);
+ break;
+ case 1:
+ tmp = __raw_readl(KS8695_PCI_VA + KS8695_PBCD);
+ tmp &= ~(0xff << ((where & 3) * 8));
+ tmp |= value << ((where & 3) * 8);
+
+ __raw_writel(tmp, KS8695_PCI_VA + KS8695_PBCD);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static void ks8695_local_writeconfig(int where, u32 value)
+{
+ ks8695_pci_setupconfig(0, 0, where);
+ __raw_writel(value, KS8695_PCI_VA + KS8695_PBCD);
+}
+
+static struct pci_ops ks8695_pci_ops = {
+ .read = ks8695_pci_readconfig,
+ .write = ks8695_pci_writeconfig,
+};
+
+static struct pci_bus *ks8695_pci_scan_bus(int nr, struct pci_sys_data *sys)
+{
+ return pci_scan_bus(sys->busnr, &ks8695_pci_ops, sys);
+}
+
+static struct resource pci_mem = {
+ .name = "PCI Memory space",
+ .start = KS8695_PCIMEM_PA,
+ .end = KS8695_PCIMEM_PA + (KS8695_PCIMEM_SIZE - 1),
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource pci_io = {
+ .name = "PCI IO space",
+ .start = KS8695_PCIIO_PA,
+ .end = KS8695_PCIIO_PA + (KS8695_PCIIO_SIZE - 1),
+ .flags = IORESOURCE_IO,
+};
+
+static int __init ks8695_pci_setup(int nr, struct pci_sys_data *sys)
+{
+ if (nr > 0)
+ return 0;
+
+ request_resource(&iomem_resource, &pci_mem);
+ request_resource(&ioport_resource, &pci_io);
+
+ sys->resource[0] = &pci_io;
+ sys->resource[1] = &pci_mem;
+ sys->resource[2] = NULL;
+
+ /* Assign and enable processor bridge */
+ ks8695_local_writeconfig(PCI_BASE_ADDRESS_0, KS8695_PCIMEM_PA);
+
+ /* Enable bus-master & Memory Space access */
+ ks8695_local_writeconfig(PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+
+ /* Set cache-line size & latency. */
+ ks8695_local_writeconfig(PCI_CACHE_LINE_SIZE, (32 << 8) | (L1_CACHE_BYTES / sizeof(u32)));
+
+ /* Reserve PCI memory space for PCI-AHB resources */
+ if (!request_mem_region(KS8695_PCIMEM_PA, SZ_64M, "PCI-AHB Bridge")) {
+ printk(KERN_ERR "Cannot allocate PCI-AHB Bridge memory.\n");
+ return -EBUSY;
+ }
+
+ return 1;
+}
+
+static inline unsigned int size_mask(unsigned long size)
+{
+ return (~size) + 1;
+}
+
+static int ks8695_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ unsigned long pc = instruction_pointer(regs);
+ unsigned long instr = *(unsigned long *)pc;
+ unsigned long cmdstat;
+
+ cmdstat = __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS);
+
+ printk(KERN_ERR "PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx [%s%s%s%s%s]\n",
+ addr, fsr, regs->ARM_pc, regs->ARM_lr,
+ cmdstat & (PCI_STATUS_SIG_TARGET_ABORT << 16) ? "GenTarget" : " ",
+ cmdstat & (PCI_STATUS_REC_TARGET_ABORT << 16) ? "RecvTarget" : " ",
+ cmdstat & (PCI_STATUS_REC_MASTER_ABORT << 16) ? "MasterAbort" : " ",
+ cmdstat & (PCI_STATUS_SIG_SYSTEM_ERROR << 16) ? "SysError" : " ",
+ cmdstat & (PCI_STATUS_DETECTED_PARITY << 16) ? "Parity" : " "
+ );
+
+ __raw_writel(cmdstat, KS8695_PCI_VA + KS8695_CRCFCS);
+
+ /*
+ * If the instruction being executed was a read,
+ * make it look like it read all-ones.
+ */
+ if ((instr & 0x0c100000) == 0x04100000) {
+ int reg = (instr >> 12) & 15;
+ unsigned long val;
+
+ if (instr & 0x00400000)
+ val = 255;
+ else
+ val = -1;
+
+ regs->uregs[reg] = val;
+ regs->ARM_pc += 4;
+ return 0;
+ }
+
+ if ((instr & 0x0e100090) == 0x00100090) {
+ int reg = (instr >> 12) & 15;
+
+ regs->uregs[reg] = -1;
+ regs->ARM_pc += 4;
+ return 0;
+ }
+
+ return 1;
+}
+
+static void __init ks8695_pci_preinit(void)
+{
+ /* stage 1 initialization, subid, subdevice = 0x0001 */
+ __raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID);
+
+ /* stage 2 initialization */
+ /* prefetch limits with 16 words, retry enable */
+ __raw_writel(0x40000000, KS8695_PCI_VA + KS8695_PBCS);
+
+ /* configure memory mapping */
+ __raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBA);
+ __raw_writel(size_mask(KS8695_PCIMEM_SIZE), KS8695_PCI_VA + KS8695_PMBAM);
+ __raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBAT);
+ __raw_writel(0, KS8695_PCI_VA + KS8695_PMBAC);
+
+ /* configure IO mapping */
+ __raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBA);
+ __raw_writel(size_mask(KS8695_PCIIO_SIZE), KS8695_PCI_VA + KS8695_PIOBAM);
+ __raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBAT);
+ __raw_writel(0, KS8695_PCI_VA + KS8695_PIOBAC);
+
+ /* hook in fault handlers */
+ hook_fault_code(8, ks8695_pci_fault, SIGBUS, "external abort on non-linefetch");
+ hook_fault_code(10, ks8695_pci_fault, SIGBUS, "external abort on non-linefetch");
+}
+
+static void ks8695_show_pciregs(void)
+{
+ if (!pci_dbg)
+ return;
+
+ printk(KERN_INFO "PCI: CRCFID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFID));
+ printk(KERN_INFO "PCI: CRCFCS = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS));
+ printk(KERN_INFO "PCI: CRCFRV = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFRV));
+ printk(KERN_INFO "PCI: CRCFLT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFLT));
+ printk(KERN_INFO "PCI: CRCBMA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCBMA));
+ printk(KERN_INFO "PCI: CRCSID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCSID));
+ printk(KERN_INFO "PCI: CRCFIT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFIT));
+
+ printk(KERN_INFO "PCI: PBM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBM));
+ printk(KERN_INFO "PCI: PBCS = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBCS));
+
+ printk(KERN_INFO "PCI: PMBA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBA));
+ printk(KERN_INFO "PCI: PMBAC = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAC));
+ printk(KERN_INFO "PCI: PMBAM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAM));
+ printk(KERN_INFO "PCI: PMBAT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAT));
+
+ printk(KERN_INFO "PCI: PIOBA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBA));
+ printk(KERN_INFO "PCI: PIOBAC = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAC));
+ printk(KERN_INFO "PCI: PIOBAM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAM));
+ printk(KERN_INFO "PCI: PIOBAT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAT));
+}
+
+
+static struct hw_pci ks8695_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = ks8695_pci_preinit,
+ .setup = ks8695_pci_setup,
+ .scan = ks8695_pci_scan_bus,
+ .postinit = NULL,
+ .swizzle = pci_std_swizzle,
+ .map_irq = NULL,
+};
+
+void __init ks8695_init_pci(struct ks8695_pci_cfg *cfg)
+{
+ if (__raw_readl(KS8695_PCI_VA + KS8695_CRCFRV) & CFRV_GUEST) {
+ printk("PCI: KS8695 in guest mode, not initialising\n");
+ return;
+ }
+
+ printk(KERN_INFO "PCI: Initialising\n");
+ ks8695_show_pciregs();
+
+ /* set Mode */
+ __raw_writel(cfg->mode << 29, KS8695_PCI_VA + KS8695_PBM);
+
+ ks8695_pci.map_irq = cfg->map_irq; /* board-specific map_irq method */
+
+ pci_common_init(&ks8695_pci);
+}
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index d2c86e4a72eb..02f766b3121d 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -70,10 +70,7 @@ static unsigned long ks8695_gettimeoffset (void)
*/
static irqreturn_t ks8695_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
timer_tick();
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-lh7a40x/time.c b/arch/arm/mach-lh7a40x/time.c
index c25316d02537..e50e60b33851 100644
--- a/arch/arm/mach-lh7a40x/time.c
+++ b/arch/arm/mach-lh7a40x/time.c
@@ -41,13 +41,9 @@
static irqreturn_t
lh7a40x_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
TIMER_EOI = 0;
timer_tick();
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
new file mode 100644
index 000000000000..3553babbbf05
--- /dev/null
+++ b/arch/arm/mach-msm/Kconfig
@@ -0,0 +1,18 @@
+if ARCH_MSM7X00A
+
+comment "MSM7X00A Board Type"
+ depends on ARCH_MSM7X00A
+
+config MACH_HALIBUT
+ depends on ARCH_MSM7X00A
+ default y
+ bool "Halibut Board (QCT SURF7200A)"
+ help
+ Support for the Qualcomm SURF7200A eval board.
+
+config MSM7X00A_IDLE
+ depends on ARCH_MSM7X00A
+ default y
+ bool "Idle Support for MSM7X00A"
+
+endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
new file mode 100644
index 000000000000..d12f23655850
--- /dev/null
+++ b/arch/arm/mach-msm/Makefile
@@ -0,0 +1,7 @@
+obj-y += io.o idle.o irq.o timer.o dma.o
+
+# Common code for board init
+obj-y += common.o
+
+obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o
+
diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot
new file mode 100644
index 000000000000..24dfbf8c07c4
--- /dev/null
+++ b/arch/arm/mach-msm/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x10008000
+params_phys-y := 0x10000100
+initrd_phys-y := 0x10800000
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
new file mode 100644
index 000000000000..86dfb2b5261c
--- /dev/null
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -0,0 +1,114 @@
+/* linux/arch/arm/mach-msm/board-halibut.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/msm_iomap.h>
+
+#include <asm/io.h>
+#include <asm/delay.h>
+
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = 0x9C004300,
+ .end = 0x9C004400,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSM_GPIO_TO_INT(49),
+ .end = MSM_GPIO_TO_INT(49),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static void mddi0_panel_power(int on)
+{
+}
+
+static struct msm_mddi_platform_data msm_mddi0_pdata = {
+ .panel_power = mddi0_panel_power,
+ .has_vsync_irq = 0,
+};
+
+static struct platform_device msm_mddi0_device = {
+ .name = "msm_mddi",
+ .id = 0,
+ .dev = {
+ .platform_data = &msm_mddi0_pdata
+ },
+};
+
+static struct platform_device msm_serial0_device = {
+ .name = "msm_serial",
+ .id = 0,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &msm_serial0_device,
+ &msm_mddi0_device,
+ &smc91x_device,
+};
+
+extern struct sys_timer msm_timer;
+
+static void __init halibut_init_irq(void)
+{
+ msm_init_irq();
+}
+
+static void __init halibut_init(void)
+{
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ msm_add_devices();
+}
+
+static void __init halibut_map_io(void)
+{
+ msm_map_common_io();
+}
+
+MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
+
+/* UART for LL DEBUG */
+ .phys_io = MSM_UART1_PHYS,
+ .io_pg_offst = ((MSM_UART1_BASE) >> 18) & 0xfffc,
+
+ .boot_params = 0x10000100,
+ .map_io = halibut_map_io,
+ .init_irq = halibut_init_irq,
+ .init_machine = halibut_init,
+ .timer = &msm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-msm/common.c b/arch/arm/mach-msm/common.c
new file mode 100644
index 000000000000..3f5d3362f887
--- /dev/null
+++ b/arch/arm/mach-msm/common.c
@@ -0,0 +1,116 @@
+/* linux/arch/arm/mach-msm/common.c
+ *
+ * Common setup code for MSM7K Boards
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/flash.h>
+#include <asm/io.h>
+
+#include <asm/setup.h>
+
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/arch/msm_iomap.h>
+
+#include <asm/arch/board.h>
+
+struct flash_platform_data msm_nand_data = {
+ .parts = 0,
+ .nr_parts = 0,
+};
+
+static struct resource msm_nand_resources[] = {
+ [0] = {
+ .start = 7,
+ .end = 7,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device msm_nand_device = {
+ .name = "msm_nand",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(msm_nand_resources),
+ .resource = msm_nand_resources,
+ .dev = {
+ .platform_data = &msm_nand_data,
+ },
+};
+
+static struct platform_device msm_smd_device = {
+ .name = "msm_smd",
+ .id = -1,
+};
+
+static struct resource msm_i2c_resources[] = {
+ {
+ .start = MSM_I2C_BASE,
+ .end = MSM_I2C_BASE + MSM_I2C_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_PWB_I2C,
+ .end = INT_PWB_I2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device msm_i2c_device = {
+ .name = "msm_i2c",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(msm_i2c_resources),
+ .resource = msm_i2c_resources,
+};
+
+static struct resource usb_resources[] = {
+ {
+ .start = MSM_HSUSB_PHYS,
+ .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_USB_HS,
+ .end = INT_USB_HS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device msm_hsusb_device = {
+ .name = "msm_hsusb",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(usb_resources),
+ .resource = usb_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+static struct platform_device *devices[] __initdata = {
+ &msm_nand_device,
+ &msm_smd_device,
+ &msm_i2c_device,
+ &msm_hsusb_device,
+};
+
+void __init msm_add_devices(void)
+{
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
new file mode 100644
index 000000000000..8b0f339b3274
--- /dev/null
+++ b/arch/arm/mach-msm/dma.c
@@ -0,0 +1,214 @@
+/* linux/arch/arm/mach-msm/dma.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm/io.h>
+#include <linux/interrupt.h>
+#include <asm/arch/dma.h>
+
+#define MSM_DMOV_CHANNEL_COUNT 16
+
+enum {
+ MSM_DMOV_PRINT_ERRORS = 1,
+ MSM_DMOV_PRINT_IO = 2,
+ MSM_DMOV_PRINT_FLOW = 4
+};
+
+static DEFINE_SPINLOCK(msm_dmov_lock);
+static struct msm_dmov_cmd active_command;
+static struct list_head ready_commands[MSM_DMOV_CHANNEL_COUNT];
+static struct list_head active_commands[MSM_DMOV_CHANNEL_COUNT];
+unsigned int msm_dmov_print_mask = MSM_DMOV_PRINT_ERRORS;
+
+#define MSM_DMOV_DPRINTF(mask, format, args...) \
+ do { \
+ if ((mask) & msm_dmov_print_mask) \
+ printk(KERN_ERR format, args); \
+ } while (0)
+#define PRINT_ERROR(format, args...) \
+ MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_ERRORS, format, args);
+#define PRINT_IO(format, args...) \
+ MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_IO, format, args);
+#define PRINT_FLOW(format, args...) \
+ MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_FLOW, format, args);
+
+void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
+{
+ unsigned long irq_flags;
+ unsigned int status;
+
+ spin_lock_irqsave(&msm_dmov_lock, irq_flags);
+ status = readl(DMOV_STATUS(id));
+ if (list_empty(&ready_commands[id]) &&
+ (status & DMOV_STATUS_CMD_PTR_RDY)) {
+#if 0
+ if (list_empty(&active_commands[id])) {
+ PRINT_FLOW("msm_dmov_enqueue_cmd(%d), enable interrupt\n", id);
+ writel(DMOV_CONFIG_IRQ_EN, DMOV_CONFIG(id));
+ }
+#endif
+ PRINT_IO("msm_dmov_enqueue_cmd(%d), start command, status %x\n", id, status);
+ list_add_tail(&cmd->list, &active_commands[id]);
+ writel(cmd->cmdptr, DMOV_CMD_PTR(id));
+ } else {
+ if (list_empty(&active_commands[id]))
+ PRINT_ERROR("msm_dmov_enqueue_cmd(%d), error datamover stalled, status %x\n", id, status);
+
+ PRINT_IO("msm_dmov_enqueue_cmd(%d), enqueue command, status %x\n", id, status);
+ list_add_tail(&cmd->list, &ready_commands[id]);
+ }
+ spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
+}
+
+struct msm_dmov_exec_cmdptr_cmd {
+ struct msm_dmov_cmd dmov_cmd;
+ struct completion complete;
+ unsigned id;
+ unsigned int result;
+ unsigned int flush[6];
+};
+
+static void dmov_exec_cmdptr_complete_func(struct msm_dmov_cmd *_cmd, unsigned int result)
+{
+ struct msm_dmov_exec_cmdptr_cmd *cmd = container_of(_cmd, struct msm_dmov_exec_cmdptr_cmd, dmov_cmd);
+ cmd->result = result;
+ if (result != 0x80000002) {
+ cmd->flush[0] = readl(DMOV_FLUSH0(cmd->id));
+ cmd->flush[1] = readl(DMOV_FLUSH1(cmd->id));
+ cmd->flush[2] = readl(DMOV_FLUSH2(cmd->id));
+ cmd->flush[3] = readl(DMOV_FLUSH3(cmd->id));
+ cmd->flush[4] = readl(DMOV_FLUSH4(cmd->id));
+ cmd->flush[5] = readl(DMOV_FLUSH5(cmd->id));
+ }
+ complete(&cmd->complete);
+}
+
+int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr)
+{
+ struct msm_dmov_exec_cmdptr_cmd cmd;
+
+ PRINT_FLOW("dmov_exec_cmdptr(%d, %x)\n", id, cmdptr);
+
+ cmd.dmov_cmd.cmdptr = cmdptr;
+ cmd.dmov_cmd.complete_func = dmov_exec_cmdptr_complete_func;
+ cmd.id = id;
+ init_completion(&cmd.complete);
+
+ msm_dmov_enqueue_cmd(id, &cmd.dmov_cmd);
+ wait_for_completion(&cmd.complete);
+
+ if (cmd.result != 0x80000002) {
+ PRINT_ERROR("dmov_exec_cmdptr(%d): ERROR, result: %x\n", id, cmd.result);
+ PRINT_ERROR("dmov_exec_cmdptr(%d): flush: %x %x %x %x\n",
+ id, cmd.flush[0], cmd.flush[1], cmd.flush[2], cmd.flush[3]);
+ return -EIO;
+ }
+ PRINT_FLOW("dmov_exec_cmdptr(%d, %x) done\n", id, cmdptr);
+ return 0;
+}
+
+
+static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id)
+{
+ unsigned int int_status, mask, id;
+ unsigned long irq_flags;
+ unsigned int ch_status;
+ unsigned int ch_result;
+ struct msm_dmov_cmd *cmd;
+
+ spin_lock_irqsave(&msm_dmov_lock, irq_flags);
+
+ int_status = readl(DMOV_ISR); /* read and clear interrupt */
+ PRINT_FLOW("msm_datamover_irq_handler: DMOV_ISR %x\n", int_status);
+
+ while (int_status) {
+ mask = int_status & -int_status;
+ id = fls(mask) - 1;
+ PRINT_FLOW("msm_datamover_irq_handler %08x %08x id %d\n", int_status, mask, id);
+ int_status &= ~mask;
+ ch_status = readl(DMOV_STATUS(id));
+ if (!(ch_status & DMOV_STATUS_RSLT_VALID)) {
+ PRINT_FLOW("msm_datamover_irq_handler id %d, result not valid %x\n", id, ch_status);
+ continue;
+ }
+ do {
+ ch_result = readl(DMOV_RSLT(id));
+ if (list_empty(&active_commands[id])) {
+ PRINT_ERROR("msm_datamover_irq_handler id %d, got result "
+ "with no active command, status %x, result %x\n",
+ id, ch_status, ch_result);
+ cmd = NULL;
+ } else
+ cmd = list_entry(active_commands[id].next, typeof(*cmd), list);
+ PRINT_FLOW("msm_datamover_irq_handler id %d, status %x, result %x\n", id, ch_status, ch_result);
+ if (ch_result & DMOV_RSLT_DONE) {
+ PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n",
+ id, ch_status);
+ PRINT_IO("msm_datamover_irq_handler id %d, got result "
+ "for %p, result %x\n", id, cmd, ch_result);
+ if (cmd) {
+ list_del(&cmd->list);
+ cmd->complete_func(cmd, ch_result);
+ }
+ }
+ if (ch_result & DMOV_RSLT_FLUSH) {
+ unsigned int flush0 = readl(DMOV_FLUSH0(id));
+ PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
+ PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, flush0);
+ if (cmd) {
+ list_del(&cmd->list);
+ cmd->complete_func(cmd, ch_result);
+ }
+ }
+ if (ch_result & DMOV_RSLT_ERROR) {
+ unsigned int flush0 = readl(DMOV_FLUSH0(id));
+ PRINT_ERROR("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
+ PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, flush0);
+ if (cmd) {
+ list_del(&cmd->list);
+ cmd->complete_func(cmd, ch_result);
+ }
+ /* this does not seem to work, once we get an error */
+ /* the datamover will no longer accept commands */
+ writel(0, DMOV_FLUSH0(id));
+ }
+ ch_status = readl(DMOV_STATUS(id));
+ PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
+ if ((ch_status & DMOV_STATUS_CMD_PTR_RDY) && !list_empty(&ready_commands[id])) {
+ cmd = list_entry(ready_commands[id].next, typeof(*cmd), list);
+ list_del(&cmd->list);
+ list_add_tail(&cmd->list, &active_commands[id]);
+ PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id);
+ writel(cmd->cmdptr, DMOV_CMD_PTR(id));
+ }
+ } while (ch_status & DMOV_STATUS_RSLT_VALID);
+ PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
+ }
+ spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
+ return IRQ_HANDLED;
+}
+
+static int __init msm_init_datamover(void)
+{
+ int i;
+ for (i = 0; i < MSM_DMOV_CHANNEL_COUNT; i++) {
+ INIT_LIST_HEAD(&ready_commands[i]);
+ INIT_LIST_HEAD(&active_commands[i]);
+ writel(DMOV_CONFIG_IRQ_EN | DMOV_CONFIG_FORCE_TOP_PTR_RSLT | DMOV_CONFIG_FORCE_FLUSH_RSLT, DMOV_CONFIG(i));
+ }
+ return request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL);
+}
+
+arch_initcall(msm_init_datamover);
+
diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S
new file mode 100644
index 000000000000..2b1cb7f16943
--- /dev/null
+++ b/arch/arm/mach-msm/idle.S
@@ -0,0 +1,36 @@
+/* linux/include/asm-arm/arch-msm/idle.S
+ *
+ * Idle processing for MSM7K - work around bugs with SWFI.
+ *
+ * Copyright (c) 2007 QUALCOMM Incorporated.
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+ENTRY(arch_idle)
+#ifdef CONFIG_MSM7X00A_IDLE
+ mrc p15, 0, r1, c1, c0, 0 /* read current CR */
+ bic r0, r1, #(1 << 2) /* clear dcache bit */
+ bic r0, r0, #(1 << 12) /* clear icache bit */
+ mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */
+
+ mov r0, #0 /* prepare wfi value */
+ mcr p15, 0, r0, c7, c10, 0 /* flush the cache */
+ mcr p15, 0, r0, c7, c10, 4 /* memory barrier */
+ mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */
+
+ mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */
+#endif
+ mov pc, lr
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
new file mode 100644
index 000000000000..c39edb994a88
--- /dev/null
+++ b/arch/arm/mach-msm/io.c
@@ -0,0 +1,85 @@
+/* arch/arm/mach-msm/io.c
+ *
+ * MSM7K io support
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/arch/msm_iomap.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/board.h>
+
+#define MSM_DEVICE(name) { \
+ .virtual = MSM_##name##_BASE, \
+ .pfn = __phys_to_pfn(MSM_##name##_PHYS), \
+ .length = MSM_##name##_SIZE, \
+ .type = MT_DEVICE_NONSHARED, \
+ }
+
+static struct map_desc msm_io_desc[] __initdata = {
+ MSM_DEVICE(VIC),
+ MSM_DEVICE(CSR),
+ MSM_DEVICE(GPT),
+ MSM_DEVICE(DMOV),
+ MSM_DEVICE(UART1),
+ MSM_DEVICE(UART2),
+ MSM_DEVICE(UART3),
+ MSM_DEVICE(I2C),
+ MSM_DEVICE(GPIO1),
+ MSM_DEVICE(GPIO2),
+ MSM_DEVICE(HSUSB),
+ MSM_DEVICE(CLK_CTL),
+ MSM_DEVICE(PMDH),
+ MSM_DEVICE(EMDH),
+ MSM_DEVICE(MDP),
+ {
+ .virtual = MSM_SHARED_RAM_BASE,
+ .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
+ .length = MSM_SHARED_RAM_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init msm_map_common_io(void)
+{
+ /* Make sure the peripheral register window is closed, since
+ * we will use PTE flags (TEX[1]=1,B=0,C=1) to determine which
+ * pages are peripheral interface or not.
+ */
+ asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0));
+
+ iotable_init(msm_io_desc, ARRAY_SIZE(msm_io_desc));
+}
+
+void __iomem *
+__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
+{
+ if (mtype == MT_DEVICE) {
+ /* The peripherals in the 88000000 - D0000000 range
+ * are only accessable by type MT_DEVICE_NONSHARED.
+ * Adjust mtype as necessary to make this "just work."
+ */
+ if ((phys_addr >= 0x88000000) && (phys_addr < 0xD0000000))
+ mtype = MT_DEVICE_NONSHARED;
+ }
+
+ return __arm_ioremap(phys_addr, size, mtype);
+}
diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c
new file mode 100644
index 000000000000..24158040b789
--- /dev/null
+++ b/arch/arm/mach-msm/irq.c
@@ -0,0 +1,154 @@
+/* linux/arch/arm/mach-msm/irq.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/timer.h>
+
+#include <linux/irq.h>
+#include <asm/hardware.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/msm_iomap.h>
+
+#define VIC_REG(off) (MSM_VIC_BASE + (off))
+
+#define VIC_INT_SELECT0 VIC_REG(0x0000) /* 1: FIQ, 0: IRQ */
+#define VIC_INT_SELECT1 VIC_REG(0x0004) /* 1: FIQ, 0: IRQ */
+#define VIC_INT_EN0 VIC_REG(0x0010)
+#define VIC_INT_EN1 VIC_REG(0x0014)
+#define VIC_INT_ENCLEAR0 VIC_REG(0x0020)
+#define VIC_INT_ENCLEAR1 VIC_REG(0x0024)
+#define VIC_INT_ENSET0 VIC_REG(0x0030)
+#define VIC_INT_ENSET1 VIC_REG(0x0034)
+#define VIC_INT_TYPE0 VIC_REG(0x0040) /* 1: EDGE, 0: LEVEL */
+#define VIC_INT_TYPE1 VIC_REG(0x0044) /* 1: EDGE, 0: LEVEL */
+#define VIC_INT_POLARITY0 VIC_REG(0x0050) /* 1: NEG, 0: POS */
+#define VIC_INT_POLARITY1 VIC_REG(0x0054) /* 1: NEG, 0: POS */
+#define VIC_NO_PEND_VAL VIC_REG(0x0060)
+#define VIC_INT_MASTEREN VIC_REG(0x0064) /* 1: IRQ, 2: FIQ */
+#define VIC_PROTECTION VIC_REG(0x006C) /* 1: ENABLE */
+#define VIC_CONFIG VIC_REG(0x0068) /* 1: USE ARM1136 VIC */
+#define VIC_IRQ_STATUS0 VIC_REG(0x0080)
+#define VIC_IRQ_STATUS1 VIC_REG(0x0084)
+#define VIC_FIQ_STATUS0 VIC_REG(0x0090)
+#define VIC_FIQ_STATUS1 VIC_REG(0x0094)
+#define VIC_RAW_STATUS0 VIC_REG(0x00A0)
+#define VIC_RAW_STATUS1 VIC_REG(0x00A4)
+#define VIC_INT_CLEAR0 VIC_REG(0x00B0)
+#define VIC_INT_CLEAR1 VIC_REG(0x00B4)
+#define VIC_SOFTINT0 VIC_REG(0x00C0)
+#define VIC_SOFTINT1 VIC_REG(0x00C4)
+#define VIC_IRQ_VEC_RD VIC_REG(0x00D0) /* pending int # */
+#define VIC_IRQ_VEC_PEND_RD VIC_REG(0x00D4) /* pending vector addr */
+#define VIC_IRQ_VEC_WR VIC_REG(0x00D8)
+#define VIC_IRQ_IN_SERVICE VIC_REG(0x00E0)
+#define VIC_IRQ_IN_STACK VIC_REG(0x00E4)
+#define VIC_TEST_BUS_SEL VIC_REG(0x00E8)
+
+#define VIC_VECTPRIORITY(n) VIC_REG(0x0200+((n) * 4))
+#define VIC_VECTADDR(n) VIC_REG(0x0400+((n) * 4))
+
+static void msm_irq_ack(unsigned int irq)
+{
+ unsigned reg = VIC_INT_CLEAR0 + ((irq & 32) ? 4 : 0);
+ irq = 1 << (irq & 31);
+ writel(irq, reg);
+}
+
+static void msm_irq_mask(unsigned int irq)
+{
+ unsigned reg = VIC_INT_ENCLEAR0 + ((irq & 32) ? 4 : 0);
+ writel(1 << (irq & 31), reg);
+}
+
+static void msm_irq_unmask(unsigned int irq)
+{
+ unsigned reg = VIC_INT_ENSET0 + ((irq & 32) ? 4 : 0);
+ writel(1 << (irq & 31), reg);
+}
+
+static int msm_irq_set_wake(unsigned int irq, unsigned int on)
+{
+ return -EINVAL;
+}
+
+static int msm_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+ unsigned treg = VIC_INT_TYPE0 + ((irq & 32) ? 4 : 0);
+ unsigned preg = VIC_INT_POLARITY0 + ((irq & 32) ? 4 : 0);
+ int b = 1 << (irq & 31);
+
+ if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
+ writel(readl(preg) | b, preg);
+ if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH))
+ writel(readl(preg) & (~b), preg);
+
+ if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
+ writel(readl(treg) | b, treg);
+ set_irq_handler(irq, handle_edge_irq);
+ }
+ if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) {
+ writel(readl(treg) & (~b), treg);
+ set_irq_handler(irq, handle_level_irq);
+ }
+ return 0;
+}
+
+static struct irq_chip msm_irq_chip = {
+ .name = "msm",
+ .ack = msm_irq_ack,
+ .mask = msm_irq_mask,
+ .unmask = msm_irq_unmask,
+ .set_wake = msm_irq_set_wake,
+ .set_type = msm_irq_set_type,
+};
+
+void __init msm_init_irq(void)
+{
+ unsigned n;
+
+ /* select level interrupts */
+ writel(0, VIC_INT_TYPE0);
+ writel(0, VIC_INT_TYPE1);
+
+ /* select highlevel interrupts */
+ writel(0, VIC_INT_POLARITY0);
+ writel(0, VIC_INT_POLARITY1);
+
+ /* select IRQ for all INTs */
+ writel(0, VIC_INT_SELECT0);
+ writel(0, VIC_INT_SELECT1);
+
+ /* disable all INTs */
+ writel(0, VIC_INT_EN0);
+ writel(0, VIC_INT_EN1);
+
+ /* don't use 1136 vic */
+ writel(0, VIC_CONFIG);
+
+ /* enable interrupt controller */
+ writel(1, VIC_INT_MASTEREN);
+
+ for (n = 0; n < NR_MSM_IRQS; n++) {
+ set_irq_chip(n, &msm_irq_chip);
+ set_irq_handler(n, handle_level_irq);
+ set_irq_flags(n, IRQF_VALID);
+ }
+}
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
new file mode 100644
index 000000000000..bd4732d1ab3e
--- /dev/null
+++ b/arch/arm/mach-msm/timer.c
@@ -0,0 +1,205 @@
+/* linux/arch/arm/mach-msm/timer.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/delay.h>
+
+#include <asm/mach/time.h>
+#include <asm/arch/msm_iomap.h>
+
+#include <asm/io.h>
+
+#define MSM_DGT_BASE (MSM_GPT_BASE + 0x10)
+#define MSM_DGT_SHIFT (5)
+
+#define TIMER_MATCH_VAL 0x0000
+#define TIMER_COUNT_VAL 0x0004
+#define TIMER_ENABLE 0x0008
+#define TIMER_ENABLE_CLR_ON_MATCH_EN 2
+#define TIMER_ENABLE_EN 1
+#define TIMER_CLEAR 0x000C
+
+#define CSR_PROTECTION 0x0020
+#define CSR_PROTECTION_EN 1
+
+#define GPT_HZ 32768
+#define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */
+
+struct msm_clock {
+ struct clock_event_device clockevent;
+ struct clocksource clocksource;
+ struct irqaction irq;
+ uint32_t regbase;
+ uint32_t freq;
+ uint32_t shift;
+};
+
+static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static cycle_t msm_gpt_read(void)
+{
+ return readl(MSM_GPT_BASE + TIMER_COUNT_VAL);
+}
+
+static cycle_t msm_dgt_read(void)
+{
+ return readl(MSM_DGT_BASE + TIMER_COUNT_VAL) >> MSM_DGT_SHIFT;
+}
+
+static int msm_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ struct msm_clock *clock = container_of(evt, struct msm_clock, clockevent);
+ uint32_t now = readl(clock->regbase + TIMER_COUNT_VAL);
+ uint32_t alarm = now + (cycles << clock->shift);
+ int late;
+
+ writel(alarm, clock->regbase + TIMER_MATCH_VAL);
+ now = readl(clock->regbase + TIMER_COUNT_VAL);
+ late = now - alarm;
+ if (late >= (-2 << clock->shift) && late < DGT_HZ*5) {
+ printk(KERN_NOTICE "msm_timer_set_next_event(%lu) clock %s, "
+ "alarm already expired, now %x, alarm %x, late %d\n",
+ cycles, clock->clockevent.name, now, alarm, late);
+ return -ETIME;
+ }
+ return 0;
+}
+
+static void msm_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ struct msm_clock *clock = container_of(evt, struct msm_clock, clockevent);
+ switch (mode) {
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ writel(TIMER_ENABLE_EN, clock->regbase + TIMER_ENABLE);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ writel(0, clock->regbase + TIMER_ENABLE);
+ break;
+ }
+}
+
+static struct msm_clock msm_clocks[] = {
+ {
+ .clockevent = {
+ .name = "gp_timer",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .rating = 200,
+ .set_next_event = msm_timer_set_next_event,
+ .set_mode = msm_timer_set_mode,
+ },
+ .clocksource = {
+ .name = "gp_timer",
+ .rating = 200,
+ .read = msm_gpt_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 24,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ },
+ .irq = {
+ .name = "gp_timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING,
+ .handler = msm_timer_interrupt,
+ .dev_id = &msm_clocks[0].clockevent,
+ .irq = INT_GP_TIMER_EXP
+ },
+ .regbase = MSM_GPT_BASE,
+ .freq = GPT_HZ
+ },
+ {
+ .clockevent = {
+ .name = "dg_timer",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32 + MSM_DGT_SHIFT,
+ .rating = 300,
+ .set_next_event = msm_timer_set_next_event,
+ .set_mode = msm_timer_set_mode,
+ },
+ .clocksource = {
+ .name = "dg_timer",
+ .rating = 300,
+ .read = msm_dgt_read,
+ .mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)),
+ .shift = 24 - MSM_DGT_SHIFT,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ },
+ .irq = {
+ .name = "dg_timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING,
+ .handler = msm_timer_interrupt,
+ .dev_id = &msm_clocks[1].clockevent,
+ .irq = INT_DEBUG_TIMER_EXP
+ },
+ .regbase = MSM_DGT_BASE,
+ .freq = DGT_HZ >> MSM_DGT_SHIFT,
+ .shift = MSM_DGT_SHIFT
+ }
+};
+
+static void __init msm_timer_init(void)
+{
+ int i;
+ int res;
+
+ for (i = 0; i < ARRAY_SIZE(msm_clocks); i++) {
+ struct msm_clock *clock = &msm_clocks[i];
+ struct clock_event_device *ce = &clock->clockevent;
+ struct clocksource *cs = &clock->clocksource;
+ writel(0, clock->regbase + TIMER_ENABLE);
+ writel(0, clock->regbase + TIMER_CLEAR);
+ writel(~0, clock->regbase + TIMER_MATCH_VAL);
+
+ ce->mult = div_sc(clock->freq, NSEC_PER_SEC, ce->shift);
+ /* allow at least 10 seconds to notice that the timer wrapped */
+ ce->max_delta_ns =
+ clockevent_delta2ns(0xf0000000 >> clock->shift, ce);
+ /* 4 gets rounded down to 3 */
+ ce->min_delta_ns = clockevent_delta2ns(4, ce);
+ ce->cpumask = cpumask_of_cpu(0);
+
+ cs->mult = clocksource_hz2mult(clock->freq, cs->shift);
+ res = clocksource_register(cs);
+ if (res)
+ printk(KERN_ERR "msm_timer_init: clocksource_register "
+ "failed for %s\n", cs->name);
+
+ res = setup_irq(clock->irq.irq, &clock->irq);
+ if (res)
+ printk(KERN_ERR "msm_timer_init: setup_irq "
+ "failed for %s\n", cs->name);
+
+ clockevents_register_device(ce);
+ }
+}
+
+struct sys_timer msm_timer = {
+ .init = msm_timer_init
+};
diff --git a/arch/arm/mach-mx3/time.c b/arch/arm/mach-mx3/time.c
index e81fb5c5d7c3..fb565c98dbfb 100644
--- a/arch/arm/mach-mx3/time.c
+++ b/arch/arm/mach-mx3/time.c
@@ -45,8 +45,6 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
{
unsigned int next_match;
- write_seqlock(&xtime_lock);
-
if (__raw_readl(MXC_GPT_GPTSR) & GPTSR_OF1) {
do {
timer_tick();
@@ -57,8 +55,6 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
__raw_readl(MXC_GPT_GPTCNT)) <= 0);
}
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-netx/Makefile b/arch/arm/mach-netx/Makefile
index 18785ff37657..7ce4ba9eb242 100644
--- a/arch/arm/mach-netx/Makefile
+++ b/arch/arm/mach-netx/Makefile
@@ -1,9 +1,6 @@
#
# Makefile for the linux kernel.
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
# Object file lists.
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index 4762e207b0bf..ea07b54afa59 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -33,12 +33,8 @@
static irqreturn_t
netx_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
timer_tick();
- write_sequnlock(&xtime_lock);
-
/* acknowledge interrupt */
writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index f65baa95986e..f550b19e1ecd 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -40,31 +40,29 @@ static int fsample_keymap[] = {
KEY(0,1,KEY_RIGHT),
KEY(0,2,KEY_LEFT),
KEY(0,3,KEY_DOWN),
- KEY(0,4,KEY_CENTER),
- KEY(0,5,KEY_0_5),
- KEY(1,0,KEY_SOFT2),
+ KEY(0,4,KEY_ENTER),
+ KEY(1,0,KEY_F10),
KEY(1,1,KEY_SEND),
KEY(1,2,KEY_END),
KEY(1,3,KEY_VOLUMEDOWN),
KEY(1,4,KEY_VOLUMEUP),
KEY(1,5,KEY_RECORD),
- KEY(2,0,KEY_SOFT1),
+ KEY(2,0,KEY_F9),
KEY(2,1,KEY_3),
KEY(2,2,KEY_6),
KEY(2,3,KEY_9),
- KEY(2,4,KEY_SHARP),
- KEY(2,5,KEY_2_5),
+ KEY(2,4,KEY_KPDOT),
KEY(3,0,KEY_BACK),
KEY(3,1,KEY_2),
KEY(3,2,KEY_5),
KEY(3,3,KEY_8),
KEY(3,4,KEY_0),
- KEY(3,5,KEY_HEADSETHOOK),
+ KEY(3,5,KEY_KPSLASH),
KEY(4,0,KEY_HOME),
KEY(4,1,KEY_1),
KEY(4,2,KEY_4),
KEY(4,3,KEY_7),
- KEY(4,4,KEY_STAR),
+ KEY(4,4,KEY_KPASTERISK),
KEY(4,5,KEY_POWER),
0
};
@@ -78,7 +76,7 @@ static struct resource smc91x_resources[] = {
[1] = {
.start = INT_730_MPU_EXT_NIRQ,
.end = 0,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 130681201c19..bfa04fa25524 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -27,6 +27,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
+#include <linux/i2c/tps65010.h>
#include <asm/hardware.h>
#include <asm/gpio.h>
@@ -36,7 +37,6 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <asm/arch/tps65010.h>
#include <asm/arch/mux.h>
#include <asm/arch/tc.h>
#include <asm/arch/irda.h>
@@ -209,7 +209,7 @@ static struct resource h2_smc91x_resources[] = {
[1] = {
.start = OMAP_GPIO_IRQ(0),
.end = OMAP_GPIO_IRQ(0),
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4f84ae273a1f..056519860565 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -26,6 +26,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
+#include <linux/i2c/tps65010.h>
#include <asm/setup.h>
#include <asm/page.h>
@@ -37,7 +38,6 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <asm/arch/tps65010.h>
#include <asm/arch/gpioexpander.h>
#include <asm/arch/irqs.h>
#include <asm/arch/mux.h>
@@ -208,7 +208,7 @@ static struct resource smc91x_resources[] = {
[1] = {
.start = OMAP_GPIO_IRQ(40),
.end = OMAP_GPIO_IRQ(40),
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 7e63a41e37c6..7d2d8af155a3 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -202,7 +202,7 @@ static struct resource innovator1510_smc91x_resources[] = {
[1] = {
.start = OMAP1510_INT_ETHER,
.end = OMAP1510_INT_ETHER,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
@@ -269,7 +269,7 @@ static struct resource innovator1610_smc91x_resources[] = {
[1] = {
.start = OMAP_GPIO_IRQ(0),
.end = OMAP_GPIO_IRQ(0),
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 22db19a53647..e2c8ffd75cff 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -32,12 +32,9 @@
#include <asm/arch/common.h>
#include <asm/arch/dsp_common.h>
#include <asm/arch/aic23.h>
-#include <asm/arch/gpio.h>
#include <asm/arch/omapfb.h>
#include <asm/arch/lcd_mipid.h>
-#include "../plat-omap/dsp/dsp_common.h"
-
#define ADS7846_PENDOWN_GPIO 15
static void __init omap_nokia770_init_irq(void)
@@ -318,6 +315,8 @@ static __init int omap_dsp_init(void)
out:
return ret;
}
+#else
+#define omap_dsp_init() do {} while (0)
#endif /* CONFIG_OMAP_DSP */
static void __init omap_nokia770_init(void)
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 5db182da322b..84333440008c 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -31,12 +31,13 @@
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/i2c/tps65010.h>
+
#include <asm/hardware.h>
#include <asm/gpio.h>
@@ -46,7 +47,6 @@
#include <asm/mach/flash.h>
#include <asm/arch/usb.h>
-#include <asm/arch/tps65010.h>
#include <asm/arch/mux.h>
#include <asm/arch/tc.h>
#include <asm/arch/common.h>
@@ -111,7 +111,7 @@ static struct resource osk5912_smc91x_resources[] = {
[1] = {
.start = OMAP_GPIO_IRQ(0),
.end = OMAP_GPIO_IRQ(0),
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index e47010fec275..ed7094a70064 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -42,7 +42,6 @@
#include <asm/arch/common.h>
#include <asm/arch/omap-alsa.h>
-#include <linux/input.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index c275d517764a..a9a0f6610c3d 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -44,7 +44,6 @@
#include <asm/arch/common.h>
#include <asm/arch/omap-alsa.h>
-#include <linux/input.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 1d5c8d509722..534dcfb9d263 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -39,31 +39,29 @@ static int p2_keymap[] = {
KEY(0,1,KEY_RIGHT),
KEY(0,2,KEY_LEFT),
KEY(0,3,KEY_DOWN),
- KEY(0,4,KEY_CENTER),
- KEY(0,5,KEY_0_5),
- KEY(1,0,KEY_SOFT2),
+ KEY(0,4,KEY_ENTER),
+ KEY(1,0,KEY_F10),
KEY(1,1,KEY_SEND),
KEY(1,2,KEY_END),
KEY(1,3,KEY_VOLUMEDOWN),
KEY(1,4,KEY_VOLUMEUP),
KEY(1,5,KEY_RECORD),
- KEY(2,0,KEY_SOFT1),
+ KEY(2,0,KEY_F9),
KEY(2,1,KEY_3),
KEY(2,2,KEY_6),
KEY(2,3,KEY_9),
- KEY(2,4,KEY_SHARP),
- KEY(2,5,KEY_2_5),
+ KEY(2,4,KEY_KPDOT),
KEY(3,0,KEY_BACK),
KEY(3,1,KEY_2),
KEY(3,2,KEY_5),
KEY(3,3,KEY_8),
KEY(3,4,KEY_0),
- KEY(3,5,KEY_HEADSETHOOK),
+ KEY(3,5,KEY_KPSLASH),
KEY(4,0,KEY_HOME),
KEY(4,1,KEY_1),
KEY(4,2,KEY_4),
KEY(4,3,KEY_7),
- KEY(4,4,KEY_STAR),
+ KEY(4,4,KEY_KPASTERISK),
KEY(4,5,KEY_POWER),
0
};
@@ -77,7 +75,7 @@ static struct resource smc91x_resources[] = {
[1] = {
.start = INT_730_MPU_EXT_NIRQ,
.end = 0,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 214dd19889ac..c82a1cd20ad4 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -117,7 +117,7 @@ static struct resource voiceblue_smc91x_resources[] = {
[1] = {
.start = OMAP_GPIO_IRQ(8),
.end = OMAP_GPIO_IRQ(8),
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 86de303ecab2..6939d5e7569a 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -5,13 +5,13 @@
*/
#include <linux/init.h>
#include <linux/workqueue.h>
+#include <linux/i2c/tps65010.h>
#include <asm/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/tps65010.h>
#include "leds.h"
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 3bf01e28df33..06b7e54a0128 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -69,14 +69,14 @@ static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
static unsigned short enable_dyn_sleep = 1;
-static ssize_t omap_pm_sleep_while_idle_show(struct kset *kset, char *buf)
+static ssize_t idle_show(struct kobject *kobj, struct kobj_attribute *attr,
+ char *buf)
{
return sprintf(buf, "%hu\n", enable_dyn_sleep);
}
-static ssize_t omap_pm_sleep_while_idle_store(struct kset *kset,
- const char * buf,
- size_t n)
+static ssize_t idle_store(struct kobject *kobj, struct kobj_attribute *attr,
+ const char * buf, size_t n)
{
unsigned short value;
if (sscanf(buf, "%hu", &value) != 1 ||
@@ -88,16 +88,9 @@ static ssize_t omap_pm_sleep_while_idle_store(struct kset *kset,
return n;
}
-static struct subsys_attribute sleep_while_idle_attr = {
- .attr = {
- .name = __stringify(sleep_while_idle),
- .mode = 0644,
- },
- .show = omap_pm_sleep_while_idle_show,
- .store = omap_pm_sleep_while_idle_store,
-};
+static struct kobj_attribute sleep_while_idle_attr =
+ __ATTR(sleep_while_idle, 0644, idle_show, idle_store);
-extern struct kset power_subsys;
static void (*omap_sram_idle)(void) = NULL;
static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
@@ -646,7 +639,7 @@ static void omap_pm_finish(void)
}
-static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
+static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
{
return IRQ_HANDLED;
}
@@ -726,9 +719,9 @@ static int __init omap_pm_init(void)
omap_pm_init_proc();
#endif
- error = subsys_create_file(&power_subsys, &sleep_while_idle_attr);
+ error = sysfs_create_file(power_kobj, &sleep_while_idle_attr);
if (error)
- printk(KERN_ERR "subsys_create_file failed: %d\n", error);
+ printk(KERN_ERR "sysfs_create_file failed: %d\n", error);
if (cpu_is_omap16xx()) {
/* configure LOW_PWR pin */
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 7e76fbf19b5d..64235dee5614 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -104,7 +104,7 @@ static struct resource sdp2430_smc91x_resources[] = {
[1] = {
.start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
.end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 3bb49c17c858..7846551f0575 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -26,7 +26,6 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/leds.h>
-#include <linux/irq.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
@@ -127,7 +126,7 @@ static struct resource apollon_smc91x_resources[] = {
[1] = {
.start = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
.end = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 8d322c20ccae..3234deedb946 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -40,13 +40,9 @@ static inline void omap2_gp_timer_start(unsigned long load_val)
static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
omap_dm_timer_write_status(gptimer, OMAP_TIMER_INT_OVERFLOW);
timer_tick();
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-orion/Kconfig b/arch/arm/mach-orion/Kconfig
new file mode 100644
index 000000000000..1dcbb6ac5a30
--- /dev/null
+++ b/arch/arm/mach-orion/Kconfig
@@ -0,0 +1,41 @@
+if ARCH_ORION
+
+menu "Orion Implementations"
+
+config MACH_DB88F5281
+ bool "Marvell Orion-2 Development Board"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell Orion-2 (88F5281) Development Board
+
+config MACH_RD88F5182
+ bool "Marvell Orion-NAS Reference Design"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell Orion-NAS (88F5182) RD2
+
+config MACH_KUROBOX_PRO
+ bool "KuroBox Pro"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ KuroBox Pro platform.
+
+config MACH_DNS323
+ bool "D-Link DNS-323"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ D-Link DNS-323 platform.
+
+config MACH_TS209
+ bool "QNAP TS-109/TS-209"
+ help
+ Say 'Y' here if you want your kernel to support the
+ QNAP TS-109/TS-209 platform.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-orion/Makefile b/arch/arm/mach-orion/Makefile
new file mode 100644
index 000000000000..f91d937a73e8
--- /dev/null
+++ b/arch/arm/mach-orion/Makefile
@@ -0,0 +1,6 @@
+obj-y += common.o addr-map.o pci.o gpio.o irq.o time.o
+obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o
+obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o
+obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o
+obj-$(CONFIG_MACH_DNS323) += dns323-setup.o
+obj-$(CONFIG_MACH_TS209) += ts209-setup.o
diff --git a/arch/arm/mach-orion/Makefile.boot b/arch/arm/mach-orion/Makefile.boot
new file mode 100644
index 000000000000..67039c3e0c48
--- /dev/null
+++ b/arch/arm/mach-orion/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-orion/addr-map.c b/arch/arm/mach-orion/addr-map.c
new file mode 100644
index 000000000000..488da3811a68
--- /dev/null
+++ b/arch/arm/mach-orion/addr-map.c
@@ -0,0 +1,484 @@
+/*
+ * arch/arm/mach-orion/addr-map.c
+ *
+ * Address map functions for Marvell Orion System On Chip
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/hardware.h>
+#include "common.h"
+
+/*
+ * The Orion has fully programable address map. There's a separate address
+ * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIE, USB,
+ * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own
+ * address decode windows that allow it to access any of the Orion resources.
+ *
+ * CPU address decoding --
+ * Linux assumes that it is the boot loader that already setup the access to
+ * DDR and internal registers.
+ * Setup access to PCI and PCI-E IO/MEM space is issued by core.c.
+ * Setup access to various devices located on the device bus interface (e.g.
+ * flashes, RTC, etc) should be issued by machine-setup.c according to
+ * specific board population (by using orion_setup_cpu_win()).
+ *
+ * Non-CPU Masters address decoding --
+ * Unlike the CPU, we setup the access from Orion's master interfaces to DDR
+ * banks only (the typical use case).
+ * Setup access for each master to DDR is issued by common.c.
+ *
+ * Note: although orion_setbits() and orion_clrbits() are not atomic
+ * no locking is necessary here since code in this file is only called
+ * at boot time when there is no concurrency issues.
+ */
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR 0
+#define TARGET_PCI 3
+#define TARGET_PCIE 4
+#define TARGET_DEV_BUS 1
+#define ATTR_DDR_CS(n) (((n) ==0) ? 0xe : \
+ ((n) == 1) ? 0xd : \
+ ((n) == 2) ? 0xb : \
+ ((n) == 3) ? 0x7 : 0xf)
+#define ATTR_PCIE_MEM 0x59
+#define ATTR_PCIE_IO 0x51
+#define ATTR_PCI_MEM 0x59
+#define ATTR_PCI_IO 0x51
+#define ATTR_DEV_CS0 0x1e
+#define ATTR_DEV_CS1 0x1d
+#define ATTR_DEV_CS2 0x1b
+#define ATTR_DEV_BOOT 0xf
+#define WIN_EN 1
+
+/*
+ * Helpers to get DDR banks info
+ */
+#define DDR_BASE_CS(n) ORION_DDR_REG(0x1500 + ((n) * 8))
+#define DDR_SIZE_CS(n) ORION_DDR_REG(0x1504 + ((n) * 8))
+#define DDR_MAX_CS 4
+#define DDR_REG_TO_SIZE(reg) (((reg) | 0xffffff) + 1)
+#define DDR_REG_TO_BASE(reg) ((reg) & 0xff000000)
+#define DDR_BANK_EN 1
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define CPU_WIN_CTRL(n) ORION_BRIDGE_REG(0x000 | ((n) << 4))
+#define CPU_WIN_BASE(n) ORION_BRIDGE_REG(0x004 | ((n) << 4))
+#define CPU_WIN_REMAP_LO(n) ORION_BRIDGE_REG(0x008 | ((n) << 4))
+#define CPU_WIN_REMAP_HI(n) ORION_BRIDGE_REG(0x00c | ((n) << 4))
+#define CPU_MAX_WIN 8
+
+/*
+ * Use this CPU address decode windows allocation
+ */
+#define CPU_WIN_PCIE_IO 0
+#define CPU_WIN_PCI_IO 1
+#define CPU_WIN_PCIE_MEM 2
+#define CPU_WIN_PCI_MEM 3
+#define CPU_WIN_DEV_BOOT 4
+#define CPU_WIN_DEV_CS0 5
+#define CPU_WIN_DEV_CS1 6
+#define CPU_WIN_DEV_CS2 7
+
+/*
+ * PCIE Address Decode Windows registers
+ */
+#define PCIE_BAR_CTRL(n) ORION_PCIE_REG(0x1804 + ((n - 1) * 4))
+#define PCIE_BAR_LO(n) ORION_PCIE_REG(0x0010 + ((n) * 8))
+#define PCIE_BAR_HI(n) ORION_PCIE_REG(0x0014 + ((n) * 8))
+#define PCIE_WIN_CTRL(n) ORION_PCIE_REG(0x1820 + ((n) << 4))
+#define PCIE_WIN_BASE(n) ORION_PCIE_REG(0x1824 + ((n) << 4))
+#define PCIE_WIN_REMAP(n) ORION_PCIE_REG(0x182c + ((n) << 4))
+#define PCIE_DEFWIN_CTRL ORION_PCIE_REG(0x18b0)
+#define PCIE_EXPROM_WIN_CTRL ORION_PCIE_REG(0x18c0)
+#define PCIE_EXPROM_WIN_REMP ORION_PCIE_REG(0x18c4)
+#define PCIE_MAX_BARS 3
+#define PCIE_MAX_WINS 5
+
+/*
+ * Use PCIE BAR '1' for all DDR banks
+ */
+#define PCIE_DRAM_BAR 1
+
+/*
+ * PCI Address Decode Windows registers
+ */
+#define PCI_BAR_SIZE_DDR_CS(n) (((n) == 0) ? ORION_PCI_REG(0xc08) : \
+ ((n) == 1) ? ORION_PCI_REG(0xd08) : \
+ ((n) == 2) ? ORION_PCI_REG(0xc0c) : \
+ ((n) == 3) ? ORION_PCI_REG(0xd0c) : 0)
+#define PCI_BAR_REMAP_DDR_CS(n) (((n) ==0) ? ORION_PCI_REG(0xc48) : \
+ ((n) == 1) ? ORION_PCI_REG(0xd48) : \
+ ((n) == 2) ? ORION_PCI_REG(0xc4c) : \
+ ((n) == 3) ? ORION_PCI_REG(0xd4c) : 0)
+#define PCI_BAR_ENABLE ORION_PCI_REG(0xc3c)
+#define PCI_CTRL_BASE_LO(n) ORION_PCI_REG(0x1e00 | ((n) << 4))
+#define PCI_CTRL_BASE_HI(n) ORION_PCI_REG(0x1e04 | ((n) << 4))
+#define PCI_CTRL_SIZE(n) ORION_PCI_REG(0x1e08 | ((n) << 4))
+#define PCI_ADDR_DECODE_CTRL ORION_PCI_REG(0xd3c)
+
+/*
+ * PCI configuration heleprs for BAR settings
+ */
+#define PCI_CONF_FUNC_BAR_CS(n) ((n) >> 1)
+#define PCI_CONF_REG_BAR_LO_CS(n) (((n) & 1) ? 0x18 : 0x10)
+#define PCI_CONF_REG_BAR_HI_CS(n) (((n) & 1) ? 0x1c : 0x14)
+
+/*
+ * Gigabit Ethernet Address Decode Windows registers
+ */
+#define ETH_WIN_BASE(win) ORION_ETH_REG(0x200 + ((win) * 8))
+#define ETH_WIN_SIZE(win) ORION_ETH_REG(0x204 + ((win) * 8))
+#define ETH_WIN_REMAP(win) ORION_ETH_REG(0x280 + ((win) * 4))
+#define ETH_WIN_EN ORION_ETH_REG(0x290)
+#define ETH_WIN_PROT ORION_ETH_REG(0x294)
+#define ETH_MAX_WIN 6
+#define ETH_MAX_REMAP_WIN 4
+
+/*
+ * USB Address Decode Windows registers
+ */
+#define USB_WIN_CTRL(i, w) ((i == 0) ? ORION_USB0_REG(0x320 + ((w) << 4)) \
+ : ORION_USB1_REG(0x320 + ((w) << 4)))
+#define USB_WIN_BASE(i, w) ((i == 0) ? ORION_USB0_REG(0x324 + ((w) << 4)) \
+ : ORION_USB1_REG(0x324 + ((w) << 4)))
+#define USB_MAX_WIN 4
+
+/*
+ * SATA Address Decode Windows registers
+ */
+#define SATA_WIN_CTRL(win) ORION_SATA_REG(0x30 + ((win) * 0x10))
+#define SATA_WIN_BASE(win) ORION_SATA_REG(0x34 + ((win) * 0x10))
+#define SATA_MAX_WIN 4
+
+static int __init orion_cpu_win_can_remap(u32 win)
+{
+ u32 dev, rev;
+
+ orion_pcie_id(&dev, &rev);
+ if ((dev == MV88F5281_DEV_ID && win < 4)
+ || (dev == MV88F5182_DEV_ID && win < 2)
+ || (dev == MV88F5181_DEV_ID && win < 2))
+ return 1;
+
+ return 0;
+}
+
+void __init orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap)
+{
+ u32 win, attr, ctrl;
+
+ switch (target) {
+ case ORION_PCIE_IO:
+ target = TARGET_PCIE;
+ attr = ATTR_PCIE_IO;
+ win = CPU_WIN_PCIE_IO;
+ break;
+ case ORION_PCI_IO:
+ target = TARGET_PCI;
+ attr = ATTR_PCI_IO;
+ win = CPU_WIN_PCI_IO;
+ break;
+ case ORION_PCIE_MEM:
+ target = TARGET_PCIE;
+ attr = ATTR_PCIE_MEM;
+ win = CPU_WIN_PCIE_MEM;
+ break;
+ case ORION_PCI_MEM:
+ target = TARGET_PCI;
+ attr = ATTR_PCI_MEM;
+ win = CPU_WIN_PCI_MEM;
+ break;
+ case ORION_DEV_BOOT:
+ target = TARGET_DEV_BUS;
+ attr = ATTR_DEV_BOOT;
+ win = CPU_WIN_DEV_BOOT;
+ break;
+ case ORION_DEV0:
+ target = TARGET_DEV_BUS;
+ attr = ATTR_DEV_CS0;
+ win = CPU_WIN_DEV_CS0;
+ break;
+ case ORION_DEV1:
+ target = TARGET_DEV_BUS;
+ attr = ATTR_DEV_CS1;
+ win = CPU_WIN_DEV_CS1;
+ break;
+ case ORION_DEV2:
+ target = TARGET_DEV_BUS;
+ attr = ATTR_DEV_CS2;
+ win = CPU_WIN_DEV_CS2;
+ break;
+ case ORION_DDR:
+ case ORION_REGS:
+ /*
+ * Must be mapped by bootloader.
+ */
+ default:
+ target = attr = win = -1;
+ BUG();
+ }
+
+ base &= 0xffff0000;
+ ctrl = (((size - 1) & 0xffff0000) | (attr << 8) |
+ (target << 4) | WIN_EN);
+
+ orion_write(CPU_WIN_BASE(win), base);
+ orion_write(CPU_WIN_CTRL(win), ctrl);
+
+ if (orion_cpu_win_can_remap(win)) {
+ if (remap >= 0) {
+ orion_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000);
+ orion_write(CPU_WIN_REMAP_HI(win), 0);
+ } else {
+ orion_write(CPU_WIN_REMAP_LO(win), base);
+ orion_write(CPU_WIN_REMAP_HI(win), 0);
+ }
+ }
+}
+
+void __init orion_setup_cpu_wins(void)
+{
+ int i;
+
+ /*
+ * First, disable and clear windows
+ */
+ for (i = 0; i < CPU_MAX_WIN; i++) {
+ orion_write(CPU_WIN_BASE(i), 0);
+ orion_write(CPU_WIN_CTRL(i), 0);
+ if (orion_cpu_win_can_remap(i)) {
+ orion_write(CPU_WIN_REMAP_LO(i), 0);
+ orion_write(CPU_WIN_REMAP_HI(i), 0);
+ }
+ }
+
+ /*
+ * Setup windows for PCI+PCIE IO+MAM space
+ */
+ orion_setup_cpu_win(ORION_PCIE_IO, ORION_PCIE_IO_BASE,
+ ORION_PCIE_IO_SIZE, ORION_PCIE_IO_REMAP);
+ orion_setup_cpu_win(ORION_PCI_IO, ORION_PCI_IO_BASE,
+ ORION_PCI_IO_SIZE, ORION_PCI_IO_REMAP);
+ orion_setup_cpu_win(ORION_PCIE_MEM, ORION_PCIE_MEM_BASE,
+ ORION_PCIE_MEM_SIZE, -1);
+ orion_setup_cpu_win(ORION_PCI_MEM, ORION_PCI_MEM_BASE,
+ ORION_PCI_MEM_SIZE, -1);
+}
+
+/*
+ * Setup PCIE BARs and Address Decode Wins:
+ * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
+ * WIN[0-3] -> DRAM bank[0-3]
+ */
+void __init orion_setup_pcie_wins(void)
+{
+ u32 base, size, i;
+
+ /*
+ * First, disable and clear BARs and windows
+ */
+ for (i = 1; i < PCIE_MAX_BARS; i++) {
+ orion_write(PCIE_BAR_CTRL(i), 0);
+ orion_write(PCIE_BAR_LO(i), 0);
+ orion_write(PCIE_BAR_HI(i), 0);
+ }
+
+ for (i = 0; i < PCIE_MAX_WINS; i++) {
+ orion_write(PCIE_WIN_CTRL(i), 0);
+ orion_write(PCIE_WIN_BASE(i), 0);
+ orion_write(PCIE_WIN_REMAP(i), 0);
+ }
+
+ /*
+ * Setup windows for DDR banks. Count total DDR size on the fly.
+ */
+ base = DDR_REG_TO_BASE(orion_read(DDR_BASE_CS(0)));
+ size = 0;
+ for (i = 0; i < DDR_MAX_CS; i++) {
+ u32 bank_base, bank_size;
+ bank_size = orion_read(DDR_SIZE_CS(i));
+ bank_base = orion_read(DDR_BASE_CS(i));
+ if (bank_size & DDR_BANK_EN) {
+ bank_size = DDR_REG_TO_SIZE(bank_size);
+ bank_base = DDR_REG_TO_BASE(bank_base);
+ orion_write(PCIE_WIN_BASE(i), bank_base & 0xffff0000);
+ orion_write(PCIE_WIN_REMAP(i), 0);
+ orion_write(PCIE_WIN_CTRL(i),
+ ((bank_size-1) & 0xffff0000) |
+ (ATTR_DDR_CS(i) << 8) |
+ (TARGET_DDR << 4) |
+ (PCIE_DRAM_BAR << 1) | WIN_EN);
+ size += bank_size;
+ }
+ }
+
+ /*
+ * Setup BAR[1] to all DRAM banks
+ */
+ orion_write(PCIE_BAR_LO(PCIE_DRAM_BAR), base & 0xffff0000);
+ orion_write(PCIE_BAR_HI(PCIE_DRAM_BAR), 0);
+ orion_write(PCIE_BAR_CTRL(PCIE_DRAM_BAR),
+ ((size - 1) & 0xffff0000) | WIN_EN);
+}
+
+void __init orion_setup_pci_wins(void)
+{
+ u32 base, size, i;
+
+ /*
+ * First, disable windows
+ */
+ orion_write(PCI_BAR_ENABLE, 0xffffffff);
+
+ /*
+ * Setup windows for DDR banks.
+ */
+ for (i = 0; i < DDR_MAX_CS; i++) {
+ base = orion_read(DDR_BASE_CS(i));
+ size = orion_read(DDR_SIZE_CS(i));
+ if (size & DDR_BANK_EN) {
+ u32 bus, dev, func, reg, val;
+ size = DDR_REG_TO_SIZE(size);
+ base = DDR_REG_TO_BASE(base);
+ bus = orion_pci_local_bus_nr();
+ dev = orion_pci_local_dev_nr();
+ func = PCI_CONF_FUNC_BAR_CS(i);
+ reg = PCI_CONF_REG_BAR_LO_CS(i);
+ orion_pci_hw_rd_conf(bus, dev, func, reg, 4, &val);
+ orion_pci_hw_wr_conf(bus, dev, func, reg, 4,
+ (base & 0xfffff000) | (val & 0xfff));
+ reg = PCI_CONF_REG_BAR_HI_CS(i);
+ orion_pci_hw_wr_conf(bus, dev, func, reg, 4, 0);
+ orion_write(PCI_BAR_SIZE_DDR_CS(i),
+ (size - 1) & 0xfffff000);
+ orion_write(PCI_BAR_REMAP_DDR_CS(i),
+ base & 0xfffff000);
+ orion_clrbits(PCI_BAR_ENABLE, (1 << i));
+ }
+ }
+
+ /*
+ * Disable automatic update of address remaping when writing to BARs
+ */
+ orion_setbits(PCI_ADDR_DECODE_CTRL, 1);
+}
+
+void __init orion_setup_usb_wins(void)
+{
+ int i;
+ u32 usb_if, dev, rev;
+ u32 max_usb_if = 1;
+
+ orion_pcie_id(&dev, &rev);
+ if (dev == MV88F5182_DEV_ID)
+ max_usb_if = 2;
+
+ for (usb_if = 0; usb_if < max_usb_if; usb_if++) {
+ /*
+ * First, disable and clear windows
+ */
+ for (i = 0; i < USB_MAX_WIN; i++) {
+ orion_write(USB_WIN_BASE(usb_if, i), 0);
+ orion_write(USB_WIN_CTRL(usb_if, i), 0);
+ }
+
+ /*
+ * Setup windows for DDR banks.
+ */
+ for (i = 0; i < DDR_MAX_CS; i++) {
+ u32 base, size;
+ size = orion_read(DDR_SIZE_CS(i));
+ base = orion_read(DDR_BASE_CS(i));
+ if (size & DDR_BANK_EN) {
+ base = DDR_REG_TO_BASE(base);
+ size = DDR_REG_TO_SIZE(size);
+ orion_write(USB_WIN_CTRL(usb_if, i),
+ ((size-1) & 0xffff0000) |
+ (ATTR_DDR_CS(i) << 8) |
+ (TARGET_DDR << 4) | WIN_EN);
+ orion_write(USB_WIN_BASE(usb_if, i),
+ base & 0xffff0000);
+ }
+ }
+ }
+}
+
+void __init orion_setup_eth_wins(void)
+{
+ int i;
+
+ /*
+ * First, disable and clear windows
+ */
+ for (i = 0; i < ETH_MAX_WIN; i++) {
+ orion_write(ETH_WIN_BASE(i), 0);
+ orion_write(ETH_WIN_SIZE(i), 0);
+ orion_setbits(ETH_WIN_EN, 1 << i);
+ orion_clrbits(ETH_WIN_PROT, 0x3 << (i * 2));
+ if (i < ETH_MAX_REMAP_WIN)
+ orion_write(ETH_WIN_REMAP(i), 0);
+ }
+
+ /*
+ * Setup windows for DDR banks.
+ */
+ for (i = 0; i < DDR_MAX_CS; i++) {
+ u32 base, size;
+ size = orion_read(DDR_SIZE_CS(i));
+ base = orion_read(DDR_BASE_CS(i));
+ if (size & DDR_BANK_EN) {
+ base = DDR_REG_TO_BASE(base);
+ size = DDR_REG_TO_SIZE(size);
+ orion_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000);
+ orion_write(ETH_WIN_BASE(i), (base & 0xffff0000) |
+ (ATTR_DDR_CS(i) << 8) |
+ TARGET_DDR);
+ orion_clrbits(ETH_WIN_EN, 1 << i);
+ orion_setbits(ETH_WIN_PROT, 0x3 << (i * 2));
+ }
+ }
+}
+
+void __init orion_setup_sata_wins(void)
+{
+ int i;
+
+ /*
+ * First, disable and clear windows
+ */
+ for (i = 0; i < SATA_MAX_WIN; i++) {
+ orion_write(SATA_WIN_BASE(i), 0);
+ orion_write(SATA_WIN_CTRL(i), 0);
+ }
+
+ /*
+ * Setup windows for DDR banks.
+ */
+ for (i = 0; i < DDR_MAX_CS; i++) {
+ u32 base, size;
+ size = orion_read(DDR_SIZE_CS(i));
+ base = orion_read(DDR_BASE_CS(i));
+ if (size & DDR_BANK_EN) {
+ base = DDR_REG_TO_BASE(base);
+ size = DDR_REG_TO_SIZE(size);
+ orion_write(SATA_WIN_CTRL(i),
+ ((size-1) & 0xffff0000) |
+ (ATTR_DDR_CS(i) << 8) |
+ (TARGET_DDR << 4) | WIN_EN);
+ orion_write(SATA_WIN_BASE(i),
+ base & 0xffff0000);
+ }
+ }
+}
diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion/common.c
new file mode 100644
index 000000000000..5e20b6b32508
--- /dev/null
+++ b/arch/arm/mach-orion/common.c
@@ -0,0 +1,315 @@
+/*
+ * arch/arm/mach-orion/common.c
+ *
+ * Core functions for Marvell Orion System On Chip
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
+#include <asm/page.h>
+#include <asm/timex.h>
+#include <asm/mach/map.h>
+#include <asm/arch/orion.h>
+#include "common.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc orion_io_desc[] __initdata = {
+ {
+ .virtual = ORION_REGS_BASE,
+ .pfn = __phys_to_pfn(ORION_REGS_BASE),
+ .length = ORION_REGS_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = ORION_PCIE_IO_BASE,
+ .pfn = __phys_to_pfn(ORION_PCIE_IO_BASE),
+ .length = ORION_PCIE_IO_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = ORION_PCI_IO_BASE,
+ .pfn = __phys_to_pfn(ORION_PCI_IO_BASE),
+ .length = ORION_PCI_IO_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = ORION_PCIE_WA_BASE,
+ .pfn = __phys_to_pfn(ORION_PCIE_WA_BASE),
+ .length = ORION_PCIE_WA_SIZE,
+ .type = MT_DEVICE
+ },
+};
+
+void __init orion_map_io(void)
+{
+ iotable_init(orion_io_desc, ARRAY_SIZE(orion_io_desc));
+}
+
+/*****************************************************************************
+ * UART
+ ****************************************************************************/
+
+static struct resource orion_uart_resources[] = {
+ {
+ .start = UART0_BASE,
+ .end = UART0_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_ORION_UART0,
+ .end = IRQ_ORION_UART0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = UART1_BASE,
+ .end = UART1_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_ORION_UART1,
+ .end = IRQ_ORION_UART1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct plat_serial8250_port orion_uart_data[] = {
+ {
+ .mapbase = UART0_BASE,
+ .membase = (char *)UART0_BASE,
+ .irq = IRQ_ORION_UART0,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = ORION_TCLK,
+ },
+ {
+ .mapbase = UART1_BASE,
+ .membase = (char *)UART1_BASE,
+ .irq = IRQ_ORION_UART1,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = ORION_TCLK,
+ },
+ { },
+};
+
+static struct platform_device orion_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = orion_uart_data,
+ },
+ .resource = orion_uart_resources,
+ .num_resources = ARRAY_SIZE(orion_uart_resources),
+};
+
+/*******************************************************************************
+ * USB Controller - 2 interfaces
+ ******************************************************************************/
+
+static struct resource orion_ehci0_resources[] = {
+ {
+ .start = ORION_USB0_REG_BASE,
+ .end = ORION_USB0_REG_BASE + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_ORION_USB0_CTRL,
+ .end = IRQ_ORION_USB0_CTRL,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource orion_ehci1_resources[] = {
+ {
+ .start = ORION_USB1_REG_BASE,
+ .end = ORION_USB1_REG_BASE + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_ORION_USB1_CTRL,
+ .end = IRQ_ORION_USB1_CTRL,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 ehci_dmamask = 0xffffffffUL;
+
+static struct platform_device orion_ehci0 = {
+ .name = "orion-ehci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = orion_ehci0_resources,
+ .num_resources = ARRAY_SIZE(orion_ehci0_resources),
+};
+
+static struct platform_device orion_ehci1 = {
+ .name = "orion-ehci",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = orion_ehci1_resources,
+ .num_resources = ARRAY_SIZE(orion_ehci1_resources),
+};
+
+/*****************************************************************************
+ * Gigabit Ethernet port
+ * (The Orion and Discovery (MV643xx) families use the same Ethernet driver)
+ ****************************************************************************/
+
+static struct resource orion_eth_shared_resources[] = {
+ {
+ .start = ORION_ETH_REG_BASE,
+ .end = ORION_ETH_REG_BASE + 0xffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device orion_eth_shared = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 0,
+ .num_resources = 1,
+ .resource = orion_eth_shared_resources,
+};
+
+static struct resource orion_eth_resources[] = {
+ {
+ .name = "eth irq",
+ .start = IRQ_ORION_ETH_SUM,
+ .end = IRQ_ORION_ETH_SUM,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device orion_eth = {
+ .name = MV643XX_ETH_NAME,
+ .id = 0,
+ .num_resources = 1,
+ .resource = orion_eth_resources,
+};
+
+void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data)
+{
+ orion_eth.dev.platform_data = eth_data;
+ platform_device_register(&orion_eth_shared);
+ platform_device_register(&orion_eth);
+}
+
+/*****************************************************************************
+ * I2C controller
+ * (The Orion and Discovery (MV643xx) families share the same I2C controller)
+ ****************************************************************************/
+
+static struct mv64xxx_i2c_pdata orion_i2c_pdata = {
+ .freq_m = 8, /* assumes 166 MHz TCLK */
+ .freq_n = 3,
+ .timeout = 1000, /* Default timeout of 1 second */
+};
+
+static struct resource orion_i2c_resources[] = {
+ {
+ .name = "i2c base",
+ .start = I2C_BASE,
+ .end = I2C_BASE + 0x20 -1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "i2c irq",
+ .start = IRQ_ORION_I2C,
+ .end = IRQ_ORION_I2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device orion_i2c = {
+ .name = MV64XXX_I2C_CTLR_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(orion_i2c_resources),
+ .resource = orion_i2c_resources,
+ .dev = {
+ .platform_data = &orion_i2c_pdata,
+ },
+};
+
+/*****************************************************************************
+ * General
+ ****************************************************************************/
+
+/*
+ * Identify device ID and rev from PCIE configuration header space '0'.
+ */
+static void orion_id(u32 *dev, u32 *rev, char **dev_name)
+{
+ orion_pcie_id(dev, rev);
+
+ if (*dev == MV88F5281_DEV_ID) {
+ if (*rev == MV88F5281_REV_D2) {
+ *dev_name = "MV88F5281-D2";
+ } else if (*rev == MV88F5281_REV_D1) {
+ *dev_name = "MV88F5281-D1";
+ } else {
+ *dev_name = "MV88F5281-Rev-Unsupported";
+ }
+ } else if (*dev == MV88F5182_DEV_ID) {
+ if (*rev == MV88F5182_REV_A2) {
+ *dev_name = "MV88F5182-A2";
+ } else {
+ *dev_name = "MV88F5182-Rev-Unsupported";
+ }
+ } else if (*dev == MV88F5181_DEV_ID) {
+ if (*rev == MV88F5181_REV_B1) {
+ *dev_name = "MV88F5181-Rev-B1";
+ } else {
+ *dev_name = "MV88F5181-Rev-Unsupported";
+ }
+ } else {
+ *dev_name = "Device-Unknown";
+ }
+}
+
+void __init orion_init(void)
+{
+ char *dev_name;
+ u32 dev, rev;
+
+ orion_id(&dev, &rev, &dev_name);
+ printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, ORION_TCLK);
+
+ /*
+ * Setup Orion address map
+ */
+ orion_setup_cpu_wins();
+ orion_setup_usb_wins();
+ orion_setup_eth_wins();
+ orion_setup_pci_wins();
+ orion_setup_pcie_wins();
+ if (dev == MV88F5182_DEV_ID)
+ orion_setup_sata_wins();
+
+ /*
+ * REgister devices
+ */
+ platform_device_register(&orion_uart);
+ platform_device_register(&orion_ehci0);
+ if (dev == MV88F5182_DEV_ID)
+ platform_device_register(&orion_ehci1);
+ platform_device_register(&orion_i2c);
+}
diff --git a/arch/arm/mach-orion/common.h b/arch/arm/mach-orion/common.h
new file mode 100644
index 000000000000..06c10c06f03e
--- /dev/null
+++ b/arch/arm/mach-orion/common.h
@@ -0,0 +1,78 @@
+#ifndef __ARCH_ORION_COMMON_H__
+#define __ARCH_ORION_COMMON_H__
+
+/*
+ * Basic Orion init functions used early by machine-setup.
+ */
+
+void __init orion_map_io(void);
+void __init orion_init_irq(void);
+void __init orion_init(void);
+
+/*
+ * Enumerations and functions for Orion windows mapping. Used by Orion core
+ * functions to map its interfaces and by the machine-setup to map its on-
+ * board devices. Details in /mach-orion/addr-map.c
+ */
+
+enum orion_target {
+ ORION_DEV_BOOT = 0,
+ ORION_DEV0,
+ ORION_DEV1,
+ ORION_DEV2,
+ ORION_PCIE_MEM,
+ ORION_PCIE_IO,
+ ORION_PCI_MEM,
+ ORION_PCI_IO,
+ ORION_DDR,
+ ORION_REGS,
+ ORION_MAX_TARGETS
+};
+
+void orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap);
+void orion_setup_cpu_wins(void);
+void orion_setup_eth_wins(void);
+void orion_setup_usb_wins(void);
+void orion_setup_pci_wins(void);
+void orion_setup_pcie_wins(void);
+void orion_setup_sata_wins(void);
+
+/*
+ * Shared code used internally by other Orion core functions.
+ * (/mach-orion/pci.c)
+ */
+
+struct pci_sys_data;
+struct pci_bus;
+
+void orion_pcie_id(u32 *dev, u32 *rev);
+u32 orion_pcie_local_bus_nr(void);
+u32 orion_pci_local_bus_nr(void);
+u32 orion_pci_local_dev_nr(void);
+int orion_pci_sys_setup(int nr, struct pci_sys_data *sys);
+struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
+int orion_pci_hw_rd_conf(u32 bus, u32 dev, u32 func, u32 where, u32 size, u32 *val);
+int orion_pci_hw_wr_conf(u32 bus, u32 dev, u32 func, u32 where, u32 size, u32 val);
+
+/*
+ * Valid GPIO pins according to MPP setup, used by machine-setup.
+ * (/mach-orion/gpio.c).
+ */
+
+void __init orion_gpio_set_valid_pins(u32 pins);
+void gpio_display(void); /* debug */
+
+/*
+ * Orion system timer (clocksource + clockevnt, /mach-orion/time.c)
+ */
+extern struct sys_timer orion_timer;
+
+/*
+ * Pull in Orion Ethernet platform_data, used by machine-setup
+ */
+
+struct mv643xx_eth_platform_data;
+
+void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data);
+
+#endif /* __ARCH_ORION_COMMON_H__ */
diff --git a/arch/arm/mach-orion/db88f5281-setup.c b/arch/arm/mach-orion/db88f5281-setup.c
new file mode 100644
index 000000000000..cb2a95ce5b57
--- /dev/null
+++ b/arch/arm/mach-orion/db88f5281-setup.c
@@ -0,0 +1,364 @@
+/*
+ * arch/arm/mach-orion/db88f5281-setup.c
+ *
+ * Marvell Orion-2 Development Board Setup
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion.h>
+#include <asm/arch/platform.h>
+#include "common.h"
+
+/*****************************************************************************
+ * DB-88F5281 on board devices
+ ****************************************************************************/
+
+/*
+ * 512K NOR flash Device bus boot chip select
+ */
+
+#define DB88F5281_NOR_BOOT_BASE 0xf4000000
+#define DB88F5281_NOR_BOOT_SIZE SZ_512K
+
+/*
+ * 7-Segment on Device bus chip select 0
+ */
+
+#define DB88F5281_7SEG_BASE 0xfa000000
+#define DB88F5281_7SEG_SIZE SZ_1K
+
+/*
+ * 32M NOR flash on Device bus chip select 1
+ */
+
+#define DB88F5281_NOR_BASE 0xfc000000
+#define DB88F5281_NOR_SIZE SZ_32M
+
+/*
+ * 32M NAND flash on Device bus chip select 2
+ */
+
+#define DB88F5281_NAND_BASE 0xfa800000
+#define DB88F5281_NAND_SIZE SZ_1K
+
+/*
+ * PCI
+ */
+
+#define DB88F5281_PCI_SLOT0_OFFS 7
+#define DB88F5281_PCI_SLOT0_IRQ_PIN 12
+#define DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN 13
+
+/*****************************************************************************
+ * 512M NOR Flash on Device bus Boot CS
+ ****************************************************************************/
+
+static struct physmap_flash_data db88f5281_boot_flash_data = {
+ .width = 1, /* 8 bit bus width */
+};
+
+static struct resource db88f5281_boot_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = DB88F5281_NOR_BOOT_BASE,
+ .end = DB88F5281_NOR_BOOT_BASE + DB88F5281_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device db88f5281_boot_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &db88f5281_boot_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &db88f5281_boot_flash_resource,
+};
+
+/*****************************************************************************
+ * 32M NOR Flash on Device bus CS1
+ ****************************************************************************/
+
+static struct physmap_flash_data db88f5281_nor_flash_data = {
+ .width = 4, /* 32 bit bus width */
+};
+
+static struct resource db88f5281_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = DB88F5281_NOR_BASE,
+ .end = DB88F5281_NOR_BASE + DB88F5281_NOR_SIZE - 1,
+};
+
+static struct platform_device db88f5281_nor_flash = {
+ .name = "physmap-flash",
+ .id = 1,
+ .dev = {
+ .platform_data = &db88f5281_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &db88f5281_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * 32M NAND Flash on Device bus CS2
+ ****************************************************************************/
+
+static struct mtd_partition db88f5281_nand_parts[] = {
+ {
+ .name = "kernel",
+ .offset = 0,
+ .size = SZ_2M,
+ },
+ {
+ .name = "root",
+ .offset = SZ_2M,
+ .size = (SZ_16M - SZ_2M),
+ },
+ {
+ .name = "user",
+ .offset = SZ_16M,
+ .size = SZ_8M,
+ },
+ {
+ .name = "recovery",
+ .offset = (SZ_16M + SZ_8M),
+ .size = SZ_8M,
+ },
+};
+
+static struct resource db88f5281_nand_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = DB88F5281_NAND_BASE,
+ .end = DB88F5281_NAND_BASE + DB88F5281_NAND_SIZE - 1,
+};
+
+static struct orion_nand_data db88f5281_nand_data = {
+ .parts = db88f5281_nand_parts,
+ .nr_parts = ARRAY_SIZE(db88f5281_nand_parts),
+ .cle = 0,
+ .ale = 1,
+ .width = 8,
+};
+
+static struct platform_device db88f5281_nand_flash = {
+ .name = "orion_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &db88f5281_nand_data,
+ },
+ .resource = &db88f5281_nand_resource,
+ .num_resources = 1,
+};
+
+/*****************************************************************************
+ * 7-Segment on Device bus CS0
+ * Dummy counter every 2 sec
+ ****************************************************************************/
+
+static void __iomem *db88f5281_7seg;
+static struct timer_list db88f5281_timer;
+
+static void db88f5281_7seg_event(unsigned long data)
+{
+ static int count = 0;
+ writel(0, db88f5281_7seg + (count << 4));
+ count = (count + 1) & 7;
+ mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
+}
+
+static int __init db88f5281_7seg_init(void)
+{
+ if (machine_is_db88f5281()) {
+ db88f5281_7seg = ioremap(DB88F5281_7SEG_BASE,
+ DB88F5281_7SEG_SIZE);
+ if (!db88f5281_7seg) {
+ printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n");
+ return -EIO;
+ }
+ setup_timer(&db88f5281_timer, db88f5281_7seg_event, 0);
+ mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
+ }
+
+ return 0;
+}
+
+__initcall(db88f5281_7seg_init);
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+void __init db88f5281_pci_preinit(void)
+{
+ int pin;
+
+ /*
+ * Configure PCI GPIO IRQ pins
+ */
+ pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
+ if (gpio_request(pin, "PCI Int1") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+ } else {
+ printk(KERN_ERR "db88f5281_pci_preinit faield to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
+ }
+
+ pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
+ if (gpio_request(pin, "PCI Int2") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+ } else {
+ printk(KERN_ERR "db88f5281_pci_preinit faield "
+ "to set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
+ }
+}
+
+static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ /*
+ * PCIE IRQ is connected internally (not GPIO)
+ */
+ if (dev->bus->number == orion_pcie_local_bus_nr())
+ return IRQ_ORION_PCIE0_INT;
+
+ /*
+ * PCI IRQs are connected via GPIOs
+ */
+ switch (slot - DB88F5281_PCI_SLOT0_OFFS) {
+ case 0:
+ return gpio_to_irq(DB88F5281_PCI_SLOT0_IRQ_PIN);
+ case 1:
+ case 2:
+ return gpio_to_irq(DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN);
+ default:
+ return -1;
+ }
+}
+
+static struct hw_pci db88f5281_pci __initdata = {
+ .nr_controllers = 2,
+ .preinit = db88f5281_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = orion_pci_sys_setup,
+ .scan = orion_pci_sys_scan_bus,
+ .map_irq = db88f5281_pci_map_irq,
+};
+
+static int __init db88f5281_pci_init(void)
+{
+ if (machine_is_db88f5281())
+ pci_common_init(&db88f5281_pci);
+
+ return 0;
+}
+
+subsys_initcall(db88f5281_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+static struct mv643xx_eth_platform_data db88f5281_eth_data = {
+ .phy_addr = 8,
+ .force_phy_addr = 1,
+};
+
+/*****************************************************************************
+ * RTC DS1339 on I2C bus
+ ****************************************************************************/
+static struct i2c_board_info __initdata db88f5281_i2c_rtc = {
+ .driver_name = "rtc-ds1307",
+ .type = "ds1339",
+ .addr = 0x68,
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct platform_device *db88f5281_devs[] __initdata = {
+ &db88f5281_boot_flash,
+ &db88f5281_nor_flash,
+ &db88f5281_nand_flash,
+};
+
+static void __init db88f5281_init(void)
+{
+ /*
+ * Basic Orion setup. Need to be called early.
+ */
+ orion_init();
+
+ /*
+ * Setup the CPU address decode windows for our on-board devices
+ */
+ orion_setup_cpu_win(ORION_DEV_BOOT, DB88F5281_NOR_BOOT_BASE,
+ DB88F5281_NOR_BOOT_SIZE, -1);
+ orion_setup_cpu_win(ORION_DEV0, DB88F5281_7SEG_BASE,
+ DB88F5281_7SEG_SIZE, -1);
+ orion_setup_cpu_win(ORION_DEV1, DB88F5281_NOR_BASE,
+ DB88F5281_NOR_SIZE, -1);
+ orion_setup_cpu_win(ORION_DEV2, DB88F5281_NAND_BASE,
+ DB88F5281_NAND_SIZE, -1);
+
+ /*
+ * Setup Multiplexing Pins:
+ * MPP0: GPIO (USB Over Current) MPP1: GPIO (USB Vbat input)
+ * MPP2: PCI_REQn[2] MPP3: PCI_GNTn[2]
+ * MPP4: PCI_REQn[3] MPP5: PCI_GNTn[3]
+ * MPP6: GPIO (JP0, CON17.2) MPP7: GPIO (JP1, CON17.1)
+ * MPP8: GPIO (JP2, CON11.2) MPP9: GPIO (JP3, CON11.3)
+ * MPP10: GPIO (RTC int) MPP11: GPIO (Baud Rate Generator)
+ * MPP12: GPIO (PCI int 1) MPP13: GPIO (PCI int 2)
+ * MPP14: NAND_REn[2] MPP15: NAND_WEn[2]
+ * MPP16: UART1_RX MPP17: UART1_TX
+ * MPP18: UART1_CTS MPP19: UART1_RTS
+ * MPP-DEV: DEV_D[16:31]
+ */
+ orion_write(MPP_0_7_CTRL, 0x00222203);
+ orion_write(MPP_8_15_CTRL, 0x44000000);
+ orion_write(MPP_16_19_CTRL, 0);
+ orion_write(MPP_DEV_CTRL, 0);
+
+ orion_gpio_set_valid_pins(0x00003fc3);
+
+ platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs));
+ i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
+ orion_eth_init(&db88f5281_eth_data);
+}
+
+MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
+ /* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
+ .phys_io = ORION_REGS_BASE,
+ .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = db88f5281_init,
+ .map_io = orion_map_io,
+ .init_irq = orion_init_irq,
+ .timer = &orion_timer,
+MACHINE_END
diff --git a/arch/arm/mach-orion/dns323-setup.c b/arch/arm/mach-orion/dns323-setup.c
new file mode 100644
index 000000000000..c8a806f249c6
--- /dev/null
+++ b/arch/arm/mach-orion/dns323-setup.c
@@ -0,0 +1,322 @@
+/*
+ * arch/arm/mach-orion/dns323-setup.c
+ *
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion.h>
+#include <asm/arch/platform.h>
+#include "common.h"
+
+#define DNS323_GPIO_LED_RIGHT_AMBER 1
+#define DNS323_GPIO_LED_LEFT_AMBER 2
+#define DNS323_GPIO_LED_POWER 5
+#define DNS323_GPIO_OVERTEMP 6
+#define DNS323_GPIO_RTC 7
+#define DNS323_GPIO_POWER_OFF 8
+#define DNS323_GPIO_KEY_POWER 9
+#define DNS323_GPIO_KEY_RESET 10
+
+/****************************************************************************
+ * PCI setup
+ */
+
+static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ /* PCI-E */
+ if (dev->bus->number == orion_pcie_local_bus_nr())
+ return IRQ_ORION_PCIE0_INT;
+
+ pr_err("%s: requested mapping for unknown bus\n", __func__);
+
+ return -1;
+}
+
+static struct hw_pci dns323_pci __initdata = {
+ .nr_controllers = 1,
+ .swizzle = pci_std_swizzle,
+ .setup = orion_pci_sys_setup,
+ .scan = orion_pci_sys_scan_bus,
+ .map_irq = dns323_pci_map_irq,
+};
+
+static int __init dns323_pci_init(void)
+{
+ if (machine_is_dns323())
+ pci_common_init(&dns323_pci);
+
+ return 0;
+}
+
+subsys_initcall(dns323_pci_init);
+
+/****************************************************************************
+ * Ethernet
+ */
+
+static struct mv643xx_eth_platform_data dns323_eth_data = {
+ .phy_addr = 8,
+ .force_phy_addr = 1,
+};
+
+/****************************************************************************
+ * 8MiB NOR flash (Spansion S29GL064M90TFIR4)
+ *
+ * Layout as used by D-Link:
+ * 0x00000000-0x00010000 : "MTD1"
+ * 0x00010000-0x00020000 : "MTD2"
+ * 0x00020000-0x001a0000 : "Linux Kernel"
+ * 0x001a0000-0x007d0000 : "File System"
+ * 0x007d0000-0x00800000 : "u-boot"
+ */
+
+#define DNS323_NOR_BOOT_BASE 0xf4000000
+#define DNS323_NOR_BOOT_SIZE SZ_8M
+
+static struct mtd_partition dns323_partitions[] = {
+ {
+ .name = "MTD1",
+ .size = 0x00010000,
+ .offset = 0,
+ }, {
+ .name = "MTD2",
+ .size = 0x00010000,
+ .offset = 0x00010000,
+ }, {
+ .name = "Linux Kernel",
+ .size = 0x00180000,
+ .offset = 0x00020000,
+ }, {
+ .name = "File System",
+ .size = 0x00630000,
+ .offset = 0x001A0000,
+ }, {
+ .name = "u-boot",
+ .size = 0x00030000,
+ .offset = 0x007d0000,
+ }
+};
+
+static struct physmap_flash_data dns323_nor_flash_data = {
+ .width = 1,
+ .parts = dns323_partitions,
+ .nr_parts = ARRAY_SIZE(dns323_partitions)
+};
+
+static struct resource dns323_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = DNS323_NOR_BOOT_BASE,
+ .end = DNS323_NOR_BOOT_BASE + DNS323_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device dns323_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = { .platform_data = &dns323_nor_flash_data, },
+ .resource = &dns323_nor_flash_resource,
+ .num_resources = 1,
+};
+
+/****************************************************************************
+ * GPIO LEDs (simple - doesn't use hardware blinking support)
+ */
+
+static struct gpio_led dns323_leds[] = {
+ {
+ .name = "power:blue",
+ .gpio = DNS323_GPIO_LED_POWER,
+ .active_low = 1,
+ }, {
+ .name = "right:amber",
+ .gpio = DNS323_GPIO_LED_RIGHT_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "left:amber",
+ .gpio = DNS323_GPIO_LED_LEFT_AMBER,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data dns323_led_data = {
+ .num_leds = ARRAY_SIZE(dns323_leds),
+ .leds = dns323_leds,
+};
+
+static struct platform_device dns323_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = { .platform_data = &dns323_led_data, },
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ */
+
+static struct gpio_keys_button dns323_buttons[] = {
+ {
+ .code = KEY_RESTART,
+ .gpio = DNS323_GPIO_KEY_RESET,
+ .desc = "Reset Button",
+ .active_low = 1,
+ },
+ {
+ .code = KEY_POWER,
+ .gpio = DNS323_GPIO_KEY_POWER,
+ .desc = "Power Button",
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_platform_data dns323_button_data = {
+ .buttons = dns323_buttons,
+ .nbuttons = ARRAY_SIZE(dns323_buttons),
+};
+
+static struct platform_device dns323_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = { .platform_data = &dns323_button_data, },
+};
+
+/****************************************************************************
+ * General Setup
+ */
+
+static struct platform_device *dns323_plat_devices[] __initdata = {
+ &dns323_nor_flash,
+ &dns323_gpio_leds,
+ &dns323_button_device,
+};
+
+/*
+ * On the DNS-323 the following devices are attached via I2C:
+ *
+ * i2c addr | chip | description
+ * 0x3e | GMT G760Af | fan speed PWM controller
+ * 0x48 | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible)
+ * 0x68 | ST M41T80 | RTC w/ alarm
+ */
+static struct i2c_board_info __initdata dns323_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("g760a", 0x3e),
+ .type = "g760a",
+ },
+#if 0
+ /* this entry requires the new-style driver model lm75 driver,
+ * for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */
+ {
+ I2C_BOARD_INFO("lm75", 0x48),
+ .type = "g751",
+ },
+#endif
+ {
+ I2C_BOARD_INFO("rtc-m41t80", 0x68),
+ .type = "m41t80",
+ }
+};
+
+/* DNS-323 specific power off method */
+static void dns323_power_off(void)
+{
+ pr_info("%s: triggering power-off...\n", __func__);
+ gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
+}
+
+static void __init dns323_init(void)
+{
+ /* Setup basic Orion functions. Need to be called early. */
+ orion_init();
+
+ /* setup flash mapping
+ * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
+ */
+ orion_setup_cpu_win(ORION_DEV_BOOT, DNS323_NOR_BOOT_BASE,
+ DNS323_NOR_BOOT_SIZE, -1);
+
+ /* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIE
+ *
+ * Open a special address decode windows for the PCIE WA.
+ */
+ orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE);
+ orion_write(ORION_REGS_BASE | 0x20070,
+ (0x7941 | (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16));
+
+ /* set MPP to 0 as D-Link's 2.6.12.6 kernel did */
+ orion_write(MPP_0_7_CTRL, 0);
+ orion_write(MPP_8_15_CTRL, 0);
+ orion_write(MPP_16_19_CTRL, 0);
+ orion_write(MPP_DEV_CTRL, 0);
+
+ /* Define used GPIO pins
+
+ GPIO Map:
+
+ | 0 | | PEX_RST_OUT (not controlled by GPIO)
+ | 1 | Out | right amber LED (= sata ch0 LED) (low-active)
+ | 2 | Out | left amber LED (= sata ch1 LED) (low-active)
+ | 3 | Out | //unknown//
+ | 4 | Out | power button LED (low-active, together with pin #5)
+ | 5 | Out | power button LED (low-active, together with pin #4)
+ | 6 | In | GMT G751-2f overtemp. shutdown signal (low-active)
+ | 7 | In | M41T80 nIRQ/OUT/SQW signal
+ | 8 | Out | triggers power off (high-active)
+ | 9 | In | power button switch (low-active)
+ | 10 | In | reset button switch (low-active)
+ | 11 | Out | //unknown//
+ | 12 | Out | //unknown//
+ | 13 | Out | //unknown//
+ | 14 | Out | //unknown//
+ | 15 | Out | //unknown//
+ */
+ orion_gpio_set_valid_pins(0x07f6);
+
+ /* register dns323 specific power-off method */
+ if ((gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0)
+ || (gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0))
+ pr_err("DNS323: failed to setup power-off GPIO\n");
+
+ pm_power_off = dns323_power_off;
+
+ /* register flash and other platform devices */
+ platform_add_devices(dns323_plat_devices,
+ ARRAY_SIZE(dns323_plat_devices));
+
+ i2c_register_board_info(0, dns323_i2c_devices,
+ ARRAY_SIZE(dns323_i2c_devices));
+
+ orion_eth_init(&dns323_eth_data);
+}
+
+/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
+MACHINE_START(DNS323, "D-Link DNS-323")
+ /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
+ .phys_io = ORION_REGS_BASE,
+ .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = dns323_init,
+ .map_io = orion_map_io,
+ .init_irq = orion_init_irq,
+ .timer = &orion_timer,
+MACHINE_END
diff --git a/arch/arm/mach-orion/gpio.c b/arch/arm/mach-orion/gpio.c
new file mode 100644
index 000000000000..d5f00c86d616
--- /dev/null
+++ b/arch/arm/mach-orion/gpio.c
@@ -0,0 +1,225 @@
+/*
+ * arch/arm/mach-orion/gpio.c
+ *
+ * GPIO functions for Marvell Orion System On Chip
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+#include <asm/gpio.h>
+#include <asm/arch/orion.h>
+#include "common.h"
+
+static DEFINE_SPINLOCK(gpio_lock);
+static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)];
+static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */
+
+void __init orion_gpio_set_valid_pins(u32 pins)
+{
+ gpio_valid[0] = pins;
+}
+
+/*
+ * GENERIC_GPIO primitives
+ */
+int gpio_direction_input(unsigned pin)
+{
+ unsigned long flags;
+
+ if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+ pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ /*
+ * Some callers might have not used the gpio_request(),
+ * so flag this pin as requested now.
+ */
+ if (!gpio_label[pin])
+ gpio_label[pin] = "?";
+
+ orion_setbits(GPIO_IO_CONF, 1 << pin);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+int gpio_direction_output(unsigned pin, int value)
+{
+ unsigned long flags;
+ int mask;
+
+ if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+ pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ /*
+ * Some callers might have not used the gpio_request(),
+ * so flag this pin as requested now.
+ */
+ if (!gpio_label[pin])
+ gpio_label[pin] = "?";
+
+ mask = 1 << pin;
+ orion_clrbits(GPIO_BLINK_EN, mask);
+ if (value)
+ orion_setbits(GPIO_OUT, mask);
+ else
+ orion_clrbits(GPIO_OUT, mask);
+ orion_clrbits(GPIO_IO_CONF, mask);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+int gpio_get_value(unsigned pin)
+{
+ int val, mask = 1 << pin;
+
+ if (orion_read(GPIO_IO_CONF) & mask)
+ val = orion_read(GPIO_DATA_IN) ^ orion_read(GPIO_IN_POL);
+ else
+ val = orion_read(GPIO_OUT);
+
+ return val & mask;
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+void gpio_set_value(unsigned pin, int value)
+{
+ unsigned long flags;
+ int mask = 1 << pin;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ orion_clrbits(GPIO_BLINK_EN, mask);
+ if (value)
+ orion_setbits(GPIO_OUT, mask);
+ else
+ orion_clrbits(GPIO_OUT, mask);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+}
+EXPORT_SYMBOL(gpio_set_value);
+
+void orion_gpio_set_blink(unsigned pin, int blink)
+{
+ unsigned long flags;
+ int mask = 1 << pin;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ orion_clrbits(GPIO_OUT, mask);
+ if (blink)
+ orion_setbits(GPIO_BLINK_EN, mask);
+ else
+ orion_clrbits(GPIO_BLINK_EN, mask);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+}
+EXPORT_SYMBOL(orion_gpio_set_blink);
+
+int gpio_request(unsigned pin, const char *label)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+ pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ if (gpio_label[pin]) {
+ pr_debug("%s: GPIO %d already used as %s\n",
+ __FUNCTION__, pin, gpio_label[pin]);
+ ret = -EBUSY;
+ } else
+ gpio_label[pin] = label ? label : "?";
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned pin)
+{
+ if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+ pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
+ return;
+ }
+
+ if (!gpio_label[pin])
+ pr_warning("%s: GPIO %d already freed\n", __FUNCTION__, pin);
+ else
+ gpio_label[pin] = NULL;
+}
+EXPORT_SYMBOL(gpio_free);
+
+/* Debug helper */
+void gpio_display(void)
+{
+ int i;
+
+ for (i = 0; i < GPIO_MAX; i++) {
+ printk(KERN_DEBUG "Pin-%d: ", i);
+
+ if (!test_bit(i, gpio_valid)) {
+ printk("non-GPIO\n");
+ } else if (!gpio_label[i]) {
+ printk("GPIO, free\n");
+ } else {
+ printk("GPIO, used by %s, ", gpio_label[i]);
+ if (orion_read(GPIO_IO_CONF) & (1 << i)) {
+ printk("input, active %s, level %s, edge %s\n",
+ ((orion_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high",
+ ((orion_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked",
+ ((orion_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked");
+ } else {
+ printk("output, val=%d\n", (orion_read(GPIO_OUT) >> i) & 1);
+ }
+ }
+ }
+
+ printk(KERN_DEBUG "MPP_0_7_CTRL (0x%08x) = 0x%08x\n",
+ MPP_0_7_CTRL, orion_read(MPP_0_7_CTRL));
+ printk(KERN_DEBUG "MPP_8_15_CTRL (0x%08x) = 0x%08x\n",
+ MPP_8_15_CTRL, orion_read(MPP_8_15_CTRL));
+ printk(KERN_DEBUG "MPP_16_19_CTRL (0x%08x) = 0x%08x\n",
+ MPP_16_19_CTRL, orion_read(MPP_16_19_CTRL));
+ printk(KERN_DEBUG "MPP_DEV_CTRL (0x%08x) = 0x%08x\n",
+ MPP_DEV_CTRL, orion_read(MPP_DEV_CTRL));
+ printk(KERN_DEBUG "GPIO_OUT (0x%08x) = 0x%08x\n",
+ GPIO_OUT, orion_read(GPIO_OUT));
+ printk(KERN_DEBUG "GPIO_IO_CONF (0x%08x) = 0x%08x\n",
+ GPIO_IO_CONF, orion_read(GPIO_IO_CONF));
+ printk(KERN_DEBUG "GPIO_BLINK_EN (0x%08x) = 0x%08x\n",
+ GPIO_BLINK_EN, orion_read(GPIO_BLINK_EN));
+ printk(KERN_DEBUG "GPIO_IN_POL (0x%08x) = 0x%08x\n",
+ GPIO_IN_POL, orion_read(GPIO_IN_POL));
+ printk(KERN_DEBUG "GPIO_DATA_IN (0x%08x) = 0x%08x\n",
+ GPIO_DATA_IN, orion_read(GPIO_DATA_IN));
+ printk(KERN_DEBUG "GPIO_LEVEL_MASK (0x%08x) = 0x%08x\n",
+ GPIO_LEVEL_MASK, orion_read(GPIO_LEVEL_MASK));
+ printk(KERN_DEBUG "GPIO_EDGE_CAUSE (0x%08x) = 0x%08x\n",
+ GPIO_EDGE_CAUSE, orion_read(GPIO_EDGE_CAUSE));
+ printk(KERN_DEBUG "GPIO_EDGE_MASK (0x%08x) = 0x%08x\n",
+ GPIO_EDGE_MASK, orion_read(GPIO_EDGE_MASK));
+}
diff --git a/arch/arm/mach-orion/irq.c b/arch/arm/mach-orion/irq.c
new file mode 100644
index 000000000000..df7e12ad378b
--- /dev/null
+++ b/arch/arm/mach-orion/irq.c
@@ -0,0 +1,241 @@
+/*
+ * arch/arm/mach-orion/irq.c
+ *
+ * Core IRQ functions for Marvell Orion System On Chip
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/gpio.h>
+#include <asm/arch/orion.h>
+#include "common.h"
+
+/*****************************************************************************
+ * Orion GPIO IRQ
+ *
+ * GPIO_IN_POL register controlls whether GPIO_DATA_IN will hold the same
+ * value of the line or the opposite value.
+ *
+ * Level IRQ handlers: DATA_IN is used directly as cause register.
+ * Interrupt are masked by LEVEL_MASK registers.
+ * Edge IRQ handlers: Change in DATA_IN are latched in EDGE_CAUSE.
+ * Interrupt are masked by EDGE_MASK registers.
+ * Both-edge handlers: Similar to regular Edge handlers, but also swaps
+ * the polarity to catch the next line transaction.
+ * This is a race condition that might not perfectly
+ * work on some use cases.
+ *
+ * Every eight GPIO lines are grouped (OR'ed) before going up to main
+ * cause register.
+ *
+ * EDGE cause mask
+ * data-in /--------| |-----| |----\
+ * -----| |----- ---- to main cause reg
+ * X \----------------| |----/
+ * polarity LEVEL mask
+ *
+ ****************************************************************************/
+static void orion_gpio_irq_ack(u32 irq)
+{
+ int pin = irq_to_gpio(irq);
+ if (irq_desc[irq].status & IRQ_LEVEL)
+ /*
+ * Mask bit for level interrupt
+ */
+ orion_clrbits(GPIO_LEVEL_MASK, 1 << pin);
+ else
+ /*
+ * Clear casue bit for egde interrupt
+ */
+ orion_clrbits(GPIO_EDGE_CAUSE, 1 << pin);
+}
+
+static void orion_gpio_irq_mask(u32 irq)
+{
+ int pin = irq_to_gpio(irq);
+ if (irq_desc[irq].status & IRQ_LEVEL)
+ orion_clrbits(GPIO_LEVEL_MASK, 1 << pin);
+ else
+ orion_clrbits(GPIO_EDGE_MASK, 1 << pin);
+}
+
+static void orion_gpio_irq_unmask(u32 irq)
+{
+ int pin = irq_to_gpio(irq);
+ if (irq_desc[irq].status & IRQ_LEVEL)
+ orion_setbits(GPIO_LEVEL_MASK, 1 << pin);
+ else
+ orion_setbits(GPIO_EDGE_MASK, 1 << pin);
+}
+
+static int orion_gpio_set_irq_type(u32 irq, u32 type)
+{
+ int pin = irq_to_gpio(irq);
+ struct irq_desc *desc;
+
+ if ((orion_read(GPIO_IO_CONF) & (1 << pin)) == 0) {
+ printk(KERN_ERR "orion_gpio_set_irq_type failed "
+ "(irq %d, pin %d).\n", irq, pin);
+ return -EINVAL;
+ }
+
+ desc = irq_desc + irq;
+
+ switch (type) {
+ case IRQT_HIGH:
+ desc->handle_irq = handle_level_irq;
+ desc->status |= IRQ_LEVEL;
+ orion_clrbits(GPIO_IN_POL, (1 << pin));
+ break;
+ case IRQT_LOW:
+ desc->handle_irq = handle_level_irq;
+ desc->status |= IRQ_LEVEL;
+ orion_setbits(GPIO_IN_POL, (1 << pin));
+ break;
+ case IRQT_RISING:
+ desc->handle_irq = handle_edge_irq;
+ desc->status &= ~IRQ_LEVEL;
+ orion_clrbits(GPIO_IN_POL, (1 << pin));
+ break;
+ case IRQT_FALLING:
+ desc->handle_irq = handle_edge_irq;
+ desc->status &= ~IRQ_LEVEL;
+ orion_setbits(GPIO_IN_POL, (1 << pin));
+ break;
+ case IRQT_BOTHEDGE:
+ desc->handle_irq = handle_edge_irq;
+ desc->status &= ~IRQ_LEVEL;
+ /*
+ * set initial polarity based on current input level
+ */
+ if ((orion_read(GPIO_IN_POL) ^ orion_read(GPIO_DATA_IN))
+ & (1 << pin))
+ orion_setbits(GPIO_IN_POL, (1 << pin)); /* falling */
+ else
+ orion_clrbits(GPIO_IN_POL, (1 << pin)); /* rising */
+
+ break;
+ default:
+ printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type);
+ return -EINVAL;
+ }
+
+ desc->status &= ~IRQ_TYPE_SENSE_MASK;
+ desc->status |= type & IRQ_TYPE_SENSE_MASK;
+
+ return 0;
+}
+
+static struct irq_chip orion_gpio_irq_chip = {
+ .name = "Orion-IRQ-GPIO",
+ .ack = orion_gpio_irq_ack,
+ .mask = orion_gpio_irq_mask,
+ .unmask = orion_gpio_irq_unmask,
+ .set_type = orion_gpio_set_irq_type,
+};
+
+static void orion_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ u32 cause, offs, pin;
+
+ BUG_ON(irq < IRQ_ORION_GPIO_0_7 || irq > IRQ_ORION_GPIO_24_31);
+ offs = (irq - IRQ_ORION_GPIO_0_7) * 8;
+ cause = (orion_read(GPIO_DATA_IN) & orion_read(GPIO_LEVEL_MASK)) |
+ (orion_read(GPIO_EDGE_CAUSE) & orion_read(GPIO_EDGE_MASK));
+
+ for (pin = offs; pin < offs + 8; pin++) {
+ if (cause & (1 << pin)) {
+ irq = gpio_to_irq(pin);
+ desc = irq_desc + irq;
+ if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
+ /* Swap polarity (race with GPIO line) */
+ u32 polarity = orion_read(GPIO_IN_POL);
+ polarity ^= 1 << pin;
+ orion_write(GPIO_IN_POL, polarity);
+ }
+ desc_handle_irq(irq, desc);
+ }
+ }
+}
+
+static void __init orion_init_gpio_irq(void)
+{
+ int i;
+ struct irq_desc *desc;
+
+ /*
+ * Mask and clear GPIO IRQ interrupts
+ */
+ orion_write(GPIO_LEVEL_MASK, 0x0);
+ orion_write(GPIO_EDGE_MASK, 0x0);
+ orion_write(GPIO_EDGE_CAUSE, 0x0);
+
+ /*
+ * Register chained level handlers for GPIO IRQs by default.
+ * User can use set_type() if he wants to use edge types handlers.
+ */
+ for (i = IRQ_ORION_GPIO_START; i < NR_IRQS; i++) {
+ set_irq_chip(i, &orion_gpio_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ desc = irq_desc + i;
+ desc->status |= IRQ_LEVEL;
+ set_irq_flags(i, IRQF_VALID);
+ }
+ set_irq_chained_handler(IRQ_ORION_GPIO_0_7, orion_gpio_irq_handler);
+ set_irq_chained_handler(IRQ_ORION_GPIO_8_15, orion_gpio_irq_handler);
+ set_irq_chained_handler(IRQ_ORION_GPIO_16_23, orion_gpio_irq_handler);
+ set_irq_chained_handler(IRQ_ORION_GPIO_24_31, orion_gpio_irq_handler);
+}
+
+/*****************************************************************************
+ * Orion Main IRQ
+ ****************************************************************************/
+static void orion_main_irq_mask(u32 irq)
+{
+ orion_clrbits(MAIN_IRQ_MASK, 1 << irq);
+}
+
+static void orion_main_irq_unmask(u32 irq)
+{
+ orion_setbits(MAIN_IRQ_MASK, 1 << irq);
+}
+
+static struct irq_chip orion_main_irq_chip = {
+ .name = "Orion-IRQ-Main",
+ .ack = orion_main_irq_mask,
+ .mask = orion_main_irq_mask,
+ .unmask = orion_main_irq_unmask,
+};
+
+static void __init orion_init_main_irq(void)
+{
+ int i;
+
+ /*
+ * Mask and clear Main IRQ interrupts
+ */
+ orion_write(MAIN_IRQ_MASK, 0x0);
+ orion_write(MAIN_IRQ_CAUSE, 0x0);
+
+ /*
+ * Register level handler for Main IRQs
+ */
+ for (i = 0; i < IRQ_ORION_GPIO_START; i++) {
+ set_irq_chip(i, &orion_main_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+}
+
+void __init orion_init_irq(void)
+{
+ orion_init_main_irq();
+ orion_init_gpio_irq();
+}
diff --git a/arch/arm/mach-orion/kurobox_pro-setup.c b/arch/arm/mach-orion/kurobox_pro-setup.c
new file mode 100644
index 000000000000..2d812ed6b5c7
--- /dev/null
+++ b/arch/arm/mach-orion/kurobox_pro-setup.c
@@ -0,0 +1,234 @@
+/*
+ * arch/arm/mach-orion/kurobox_pro-setup.c
+ *
+ * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion.h>
+#include <asm/arch/platform.h>
+#include "common.h"
+
+/*****************************************************************************
+ * KUROBOX-PRO Info
+ ****************************************************************************/
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define KUROBOX_PRO_NOR_BOOT_BASE 0xf4000000
+#define KUROBOX_PRO_NOR_BOOT_SIZE SZ_256K
+
+/*
+ * 256M NAND flash on Device bus chip select 1
+ */
+
+#define KUROBOX_PRO_NAND_BASE 0xfc000000
+#define KUROBOX_PRO_NAND_SIZE SZ_2M
+
+/*****************************************************************************
+ * 256MB NAND Flash on Device bus CS0
+ ****************************************************************************/
+
+static struct mtd_partition kurobox_pro_nand_parts[] = {
+ {
+ .name = "uImage",
+ .offset = 0,
+ .size = SZ_4M,
+ },
+ {
+ .name = "rootfs",
+ .offset = SZ_4M,
+ .size = SZ_64M,
+ },
+ {
+ .name = "extra",
+ .offset = SZ_4M + SZ_64M,
+ .size = SZ_256M - (SZ_4M + SZ_64M),
+ },
+};
+
+static struct resource kurobox_pro_nand_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = KUROBOX_PRO_NAND_BASE,
+ .end = KUROBOX_PRO_NAND_BASE + KUROBOX_PRO_NAND_SIZE - 1,
+};
+
+static struct orion_nand_data kurobox_pro_nand_data = {
+ .parts = kurobox_pro_nand_parts,
+ .nr_parts = ARRAY_SIZE(kurobox_pro_nand_parts),
+ .cle = 0,
+ .ale = 1,
+ .width = 8,
+};
+
+static struct platform_device kurobox_pro_nand_flash = {
+ .name = "orion_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &kurobox_pro_nand_data,
+ },
+ .resource = &kurobox_pro_nand_resource,
+ .num_resources = 1,
+};
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data kurobox_pro_nor_flash_data = {
+ .width = 1,
+};
+
+static struct resource kurobox_pro_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = KUROBOX_PRO_NOR_BOOT_BASE,
+ .end = KUROBOX_PRO_NOR_BOOT_BASE + KUROBOX_PRO_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device kurobox_pro_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &kurobox_pro_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &kurobox_pro_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ /*
+ * PCI isn't used on the Kuro
+ */
+ if (dev->bus->number == orion_pcie_local_bus_nr())
+ return IRQ_ORION_PCIE0_INT;
+ else
+ printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n");
+
+ return -1;
+}
+
+static struct hw_pci kurobox_pro_pci __initdata = {
+ .nr_controllers = 1,
+ .swizzle = pci_std_swizzle,
+ .setup = orion_pci_sys_setup,
+ .scan = orion_pci_sys_scan_bus,
+ .map_irq = kurobox_pro_pci_map_irq,
+};
+
+static int __init kurobox_pro_pci_init(void)
+{
+ if (machine_is_kurobox_pro())
+ pci_common_init(&kurobox_pro_pci);
+
+ return 0;
+}
+
+subsys_initcall(kurobox_pro_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data kurobox_pro_eth_data = {
+ .phy_addr = 8,
+ .force_phy_addr = 1,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = {
+ .driver_name = "rtc-rs5c372",
+ .type = "rs5c372a",
+ .addr = 0x32,
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct platform_device *kurobox_pro_devices[] __initdata = {
+ &kurobox_pro_nor_flash,
+ &kurobox_pro_nand_flash,
+};
+
+static void __init kurobox_pro_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion_init();
+
+ /*
+ * Setup the CPU address decode windows for our devices
+ */
+ orion_setup_cpu_win(ORION_DEV_BOOT, KUROBOX_PRO_NOR_BOOT_BASE,
+ KUROBOX_PRO_NOR_BOOT_SIZE, -1);
+ orion_setup_cpu_win(ORION_DEV0, KUROBOX_PRO_NAND_BASE,
+ KUROBOX_PRO_NAND_SIZE, -1);
+ /*
+ * Open a special address decode windows for the PCIE WA.
+ */
+ orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE);
+ orion_write(ORION_REGS_BASE | 0x20070, (0x7941 |
+ (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16));
+
+ /*
+ * Setup Multiplexing Pins --
+ * MPP[0-1] Not used
+ * MPP[2] GPIO Micon
+ * MPP[3] GPIO RTC
+ * MPP[4-5] Not used
+ * MPP[6] Nand Flash REn
+ * MPP[7] Nand Flash WEn
+ * MPP[8-11] Not used
+ * MPP[12] SATA 0 presence Indication
+ * MPP[13] SATA 1 presence Indication
+ * MPP[14] SATA 0 active Indication
+ * MPP[15] SATA 1 active indication
+ * MPP[16-19] Not used
+ */
+ orion_write(MPP_0_7_CTRL, 0x44220003);
+ orion_write(MPP_8_15_CTRL, 0x55550000);
+ orion_write(MPP_16_19_CTRL, 0x0);
+
+ orion_gpio_set_valid_pins(0x0000000c);
+
+ platform_add_devices(kurobox_pro_devices, ARRAY_SIZE(kurobox_pro_devices));
+ i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
+ orion_eth_init(&kurobox_pro_eth_data);
+}
+
+MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
+ /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
+ .phys_io = ORION_REGS_BASE,
+ .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = kurobox_pro_init,
+ .map_io = orion_map_io,
+ .init_irq = orion_init_irq,
+ .timer = &orion_timer,
+MACHINE_END
diff --git a/arch/arm/mach-orion/pci.c b/arch/arm/mach-orion/pci.c
new file mode 100644
index 000000000000..0498d7c69b30
--- /dev/null
+++ b/arch/arm/mach-orion/pci.c
@@ -0,0 +1,557 @@
+/*
+ * arch/arm/mach-orion/pci.c
+ *
+ * PCI and PCIE functions for Marvell Orion System On Chip
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/mach/pci.h>
+#include "common.h"
+
+/*****************************************************************************
+ * Orion has one PCIE controller and one PCI controller.
+ *
+ * Note1: The local PCIE bus number is '0'. The local PCI bus number
+ * follows the scanned PCIE bridged busses, if any.
+ *
+ * Note2: It is possible for PCI/PCIE agents to access many subsystem's
+ * space, by configuring BARs and Address Decode Windows, e.g. flashes on
+ * device bus, Orion registers, etc. However this code only enable the
+ * access to DDR banks.
+ ****************************************************************************/
+
+
+/*****************************************************************************
+ * PCIE controller
+ ****************************************************************************/
+#define PCIE_CTRL ORION_PCIE_REG(0x1a00)
+#define PCIE_STAT ORION_PCIE_REG(0x1a04)
+#define PCIE_DEV_ID ORION_PCIE_REG(0x0000)
+#define PCIE_CMD_STAT ORION_PCIE_REG(0x0004)
+#define PCIE_DEV_REV ORION_PCIE_REG(0x0008)
+#define PCIE_MASK ORION_PCIE_REG(0x1910)
+#define PCIE_CONF_ADDR ORION_PCIE_REG(0x18f8)
+#define PCIE_CONF_DATA ORION_PCIE_REG(0x18fc)
+
+/*
+ * PCIE_STAT bits
+ */
+#define PCIE_STAT_LINK_DOWN 1
+#define PCIE_STAT_BUS_OFFS 8
+#define PCIE_STAT_BUS_MASK (0xff << PCIE_STAT_BUS_OFFS)
+#define PCIE_STAT_DEV_OFFS 20
+#define PCIE_STAT_DEV_MASK (0x1f << PCIE_STAT_DEV_OFFS)
+
+/*
+ * PCIE_CONF_ADDR bits
+ */
+#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 24) | ((r) & 0xfc))
+#define PCIE_CONF_FUNC(f) (((f) & 0x3) << 8)
+#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11)
+#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16)
+#define PCIE_CONF_ADDR_EN (1 << 31)
+
+/*
+ * PCIE config cycles are done by programming the PCIE_CONF_ADDR register
+ * and then reading the PCIE_CONF_DATA register. Need to make sure these
+ * transactions are atomic.
+ */
+static DEFINE_SPINLOCK(orion_pcie_lock);
+
+void orion_pcie_id(u32 *dev, u32 *rev)
+{
+ *dev = orion_read(PCIE_DEV_ID) >> 16;
+ *rev = orion_read(PCIE_DEV_REV) & 0xff;
+}
+
+u32 orion_pcie_local_bus_nr(void)
+{
+ u32 stat = orion_read(PCIE_STAT);
+ return((stat & PCIE_STAT_BUS_MASK) >> PCIE_STAT_BUS_OFFS);
+}
+
+static u32 orion_pcie_local_dev_nr(void)
+{
+ u32 stat = orion_read(PCIE_STAT);
+ return((stat & PCIE_STAT_DEV_MASK) >> PCIE_STAT_DEV_OFFS);
+}
+
+static u32 orion_pcie_no_link(void)
+{
+ u32 stat = orion_read(PCIE_STAT);
+ return(stat & PCIE_STAT_LINK_DOWN);
+}
+
+static void orion_pcie_set_bus_nr(int nr)
+{
+ orion_clrbits(PCIE_STAT, PCIE_STAT_BUS_MASK);
+ orion_setbits(PCIE_STAT, nr << PCIE_STAT_BUS_OFFS);
+}
+
+static void orion_pcie_master_slave_enable(void)
+{
+ orion_setbits(PCIE_CMD_STAT, PCI_COMMAND_MASTER |
+ PCI_COMMAND_IO |
+ PCI_COMMAND_MEMORY);
+}
+
+static void orion_pcie_enable_interrupts(void)
+{
+ /*
+ * Enable interrupts lines
+ * INTA[24] INTB[25] INTC[26] INTD[27]
+ */
+ orion_setbits(PCIE_MASK, 0xf<<24);
+}
+
+static int orion_pcie_valid_config(u32 bus, u32 dev)
+{
+ /*
+ * Don't go out when trying to access --
+ * 1. our own device
+ * 2. where there's no device connected (no link)
+ * 3. nonexisting devices on local bus
+ */
+
+ if ((orion_pcie_local_bus_nr() == bus) &&
+ (orion_pcie_local_dev_nr() == dev))
+ return 0;
+
+ if (orion_pcie_no_link())
+ return 0;
+
+ if (bus == orion_pcie_local_bus_nr())
+ if (((orion_pcie_local_dev_nr() == 0) && (dev != 1)) ||
+ ((orion_pcie_local_dev_nr() != 0) && (dev != 0)))
+ return 0;
+
+ return 1;
+}
+
+static int orion_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+ int size, u32 *val)
+{
+ unsigned long flags;
+ unsigned int dev, rev, pcie_addr;
+
+ if (orion_pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ spin_lock_irqsave(&orion_pcie_lock, flags);
+
+ orion_write(PCIE_CONF_ADDR, PCIE_CONF_BUS(bus->number) |
+ PCIE_CONF_DEV(PCI_SLOT(devfn)) |
+ PCIE_CONF_FUNC(PCI_FUNC(devfn)) |
+ PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN);
+
+ orion_pcie_id(&dev, &rev);
+ if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) {
+ /* extended register space */
+ pcie_addr = ORION_PCIE_WA_BASE;
+ pcie_addr |= PCIE_CONF_BUS(bus->number) |
+ PCIE_CONF_DEV(PCI_SLOT(devfn)) |
+ PCIE_CONF_FUNC(PCI_FUNC(devfn)) |
+ PCIE_CONF_REG(where);
+ *val = orion_read(pcie_addr);
+ } else
+ *val = orion_read(PCIE_CONF_DATA);
+
+ if (size == 1)
+ *val = (*val >> (8*(where & 0x3))) & 0xff;
+ else if (size == 2)
+ *val = (*val >> (8*(where & 0x3))) & 0xffff;
+
+ spin_unlock_irqrestore(&orion_pcie_lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int orion_pcie_wr_conf(struct pci_bus *bus, u32 devfn, int where,
+ int size, u32 val)
+{
+ unsigned long flags;
+ int ret;
+
+ if (orion_pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ spin_lock_irqsave(&orion_pcie_lock, flags);
+
+ ret = PCIBIOS_SUCCESSFUL;
+
+ orion_write(PCIE_CONF_ADDR, PCIE_CONF_BUS(bus->number) |
+ PCIE_CONF_DEV(PCI_SLOT(devfn)) |
+ PCIE_CONF_FUNC(PCI_FUNC(devfn)) |
+ PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN);
+
+ if (size == 4) {
+ __raw_writel(val, PCIE_CONF_DATA);
+ } else if (size == 2) {
+ __raw_writew(val, PCIE_CONF_DATA + (where & 0x3));
+ } else if (size == 1) {
+ __raw_writeb(val, PCIE_CONF_DATA + (where & 0x3));
+ } else {
+ ret = PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+ spin_unlock_irqrestore(&orion_pcie_lock, flags);
+
+ return ret;
+}
+
+struct pci_ops orion_pcie_ops = {
+ .read = orion_pcie_rd_conf,
+ .write = orion_pcie_wr_conf,
+};
+
+
+static int orion_pcie_setup(struct pci_sys_data *sys)
+{
+ struct resource *res;
+
+ /*
+ * Master + Slave enable
+ */
+ orion_pcie_master_slave_enable();
+
+ /*
+ * Enable interrupts lines A-D
+ */
+ orion_pcie_enable_interrupts();
+
+ /*
+ * Request resource
+ */
+ res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+ if (!res)
+ panic("orion_pci_setup unable to alloc resources");
+
+ /*
+ * IORESOURCE_IO
+ */
+ res[0].name = "PCI-EX I/O Space";
+ res[0].flags = IORESOURCE_IO;
+ res[0].start = ORION_PCIE_IO_REMAP;
+ res[0].end = res[0].start + ORION_PCIE_IO_SIZE - 1;
+ if (request_resource(&ioport_resource, &res[0]))
+ panic("Request PCIE IO resource failed\n");
+ sys->resource[0] = &res[0];
+
+ /*
+ * IORESOURCE_MEM
+ */
+ res[1].name = "PCI-EX Memory Space";
+ res[1].flags = IORESOURCE_MEM;
+ res[1].start = ORION_PCIE_MEM_BASE;
+ res[1].end = res[1].start + ORION_PCIE_MEM_SIZE - 1;
+ if (request_resource(&iomem_resource, &res[1]))
+ panic("Request PCIE Memory resource failed\n");
+ sys->resource[1] = &res[1];
+
+ sys->resource[2] = NULL;
+ sys->io_offset = 0;
+
+ return 1;
+}
+
+/*****************************************************************************
+ * PCI controller
+ ****************************************************************************/
+#define PCI_MODE ORION_PCI_REG(0xd00)
+#define PCI_CMD ORION_PCI_REG(0xc00)
+#define PCI_P2P_CONF ORION_PCI_REG(0x1d14)
+#define PCI_CONF_ADDR ORION_PCI_REG(0xc78)
+#define PCI_CONF_DATA ORION_PCI_REG(0xc7c)
+
+/*
+ * PCI_MODE bits
+ */
+#define PCI_MODE_64BIT (1 << 2)
+#define PCI_MODE_PCIX ((1 << 4) | (1 << 5))
+
+/*
+ * PCI_CMD bits
+ */
+#define PCI_CMD_HOST_REORDER (1 << 29)
+
+/*
+ * PCI_P2P_CONF bits
+ */
+#define PCI_P2P_BUS_OFFS 16
+#define PCI_P2P_BUS_MASK (0xff << PCI_P2P_BUS_OFFS)
+#define PCI_P2P_DEV_OFFS 24
+#define PCI_P2P_DEV_MASK (0x1f << PCI_P2P_DEV_OFFS)
+
+/*
+ * PCI_CONF_ADDR bits
+ */
+#define PCI_CONF_REG(reg) ((reg) & 0xfc)
+#define PCI_CONF_FUNC(func) (((func) & 0x3) << 8)
+#define PCI_CONF_DEV(dev) (((dev) & 0x1f) << 11)
+#define PCI_CONF_BUS(bus) (((bus) & 0xff) << 16)
+#define PCI_CONF_ADDR_EN (1 << 31)
+
+/*
+ * Internal configuration space
+ */
+#define PCI_CONF_FUNC_STAT_CMD 0
+#define PCI_CONF_REG_STAT_CMD 4
+#define PCIX_STAT 0x64
+#define PCIX_STAT_BUS_OFFS 8
+#define PCIX_STAT_BUS_MASK (0xff << PCIX_STAT_BUS_OFFS)
+
+/*
+ * PCI config cycles are done by programming the PCI_CONF_ADDR register
+ * and then reading the PCI_CONF_DATA register. Need to make sure these
+ * transactions are atomic.
+ */
+static DEFINE_SPINLOCK(orion_pci_lock);
+
+u32 orion_pci_local_bus_nr(void)
+{
+ u32 conf = orion_read(PCI_P2P_CONF);
+ return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS);
+}
+
+u32 orion_pci_local_dev_nr(void)
+{
+ u32 conf = orion_read(PCI_P2P_CONF);
+ return((conf & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS);
+}
+
+int orion_pci_hw_rd_conf(u32 bus, u32 dev, u32 func,
+ u32 where, u32 size, u32 *val)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&orion_pci_lock, flags);
+
+ orion_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) |
+ PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
+ PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN);
+
+ *val = orion_read(PCI_CONF_DATA);
+
+ if (size == 1)
+ *val = (*val >> (8*(where & 0x3))) & 0xff;
+ else if (size == 2)
+ *val = (*val >> (8*(where & 0x3))) & 0xffff;
+
+ spin_unlock_irqrestore(&orion_pci_lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+int orion_pci_hw_wr_conf(u32 bus, u32 dev, u32 func,
+ u32 where, u32 size, u32 val)
+{
+ unsigned long flags;
+ int ret = PCIBIOS_SUCCESSFUL;
+
+ spin_lock_irqsave(&orion_pci_lock, flags);
+
+ orion_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) |
+ PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
+ PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN);
+
+ if (size == 4) {
+ __raw_writel(val, PCI_CONF_DATA);
+ } else if (size == 2) {
+ __raw_writew(val, PCI_CONF_DATA + (where & 0x3));
+ } else if (size == 1) {
+ __raw_writeb(val, PCI_CONF_DATA + (where & 0x3));
+ } else {
+ ret = PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+ spin_unlock_irqrestore(&orion_pci_lock, flags);
+
+ return ret;
+}
+
+static int orion_pci_rd_conf(struct pci_bus *bus, u32 devfn,
+ int where, int size, u32 *val)
+{
+ /*
+ * Don't go out for local device
+ */
+ if ((orion_pci_local_bus_nr() == bus->number) &&
+ (orion_pci_local_dev_nr() == PCI_SLOT(devfn))) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ return orion_pci_hw_rd_conf(bus->number, PCI_SLOT(devfn),
+ PCI_FUNC(devfn), where, size, val);
+}
+
+static int orion_pci_wr_conf(struct pci_bus *bus, u32 devfn,
+ int where, int size, u32 val)
+{
+ /*
+ * Don't go out for local device
+ */
+ if ((orion_pci_local_bus_nr() == bus->number) &&
+ (orion_pci_local_dev_nr() == PCI_SLOT(devfn)))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return orion_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn),
+ PCI_FUNC(devfn), where, size, val);
+}
+
+struct pci_ops orion_pci_ops = {
+ .read = orion_pci_rd_conf,
+ .write = orion_pci_wr_conf,
+};
+
+static void orion_pci_set_bus_nr(int nr)
+{
+ u32 p2p = orion_read(PCI_P2P_CONF);
+
+ if (orion_read(PCI_MODE) & PCI_MODE_PCIX) {
+ /*
+ * PCI-X mode
+ */
+ u32 pcix_status, bus, dev;
+ bus = (p2p & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS;
+ dev = (p2p & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS;
+ orion_pci_hw_rd_conf(bus, dev, 0, PCIX_STAT, 4, &pcix_status);
+ pcix_status &= ~PCIX_STAT_BUS_MASK;
+ pcix_status |= (nr << PCIX_STAT_BUS_OFFS);
+ orion_pci_hw_wr_conf(bus, dev, 0, PCIX_STAT, 4, pcix_status);
+ } else {
+ /*
+ * PCI Conventional mode
+ */
+ p2p &= ~PCI_P2P_BUS_MASK;
+ p2p |= (nr << PCI_P2P_BUS_OFFS);
+ orion_write(PCI_P2P_CONF, p2p);
+ }
+}
+
+static void orion_pci_master_slave_enable(void)
+{
+ u32 bus_nr, dev_nr, func, reg, val;
+
+ bus_nr = orion_pci_local_bus_nr();
+ dev_nr = orion_pci_local_dev_nr();
+ func = PCI_CONF_FUNC_STAT_CMD;
+ reg = PCI_CONF_REG_STAT_CMD;
+ orion_pci_hw_rd_conf(bus_nr, dev_nr, func, reg, 4, &val);
+ val |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ orion_pci_hw_wr_conf(bus_nr, dev_nr, func, reg, 4, val | 0x7);
+}
+
+static int orion_pci_setup(struct pci_sys_data *sys)
+{
+ struct resource *res;
+
+ /*
+ * Master + Slave enable
+ */
+ orion_pci_master_slave_enable();
+
+ /*
+ * Force ordering
+ */
+ orion_setbits(PCI_CMD, PCI_CMD_HOST_REORDER);
+
+ /*
+ * Request resources
+ */
+ res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+ if (!res)
+ panic("orion_pci_setup unable to alloc resources");
+
+ /*
+ * IORESOURCE_IO
+ */
+ res[0].name = "PCI I/O Space";
+ res[0].flags = IORESOURCE_IO;
+ res[0].start = ORION_PCI_IO_REMAP;
+ res[0].end = res[0].start + ORION_PCI_IO_SIZE - 1;
+ if (request_resource(&ioport_resource, &res[0]))
+ panic("Request PCI IO resource failed\n");
+ sys->resource[0] = &res[0];
+
+ /*
+ * IORESOURCE_MEM
+ */
+ res[1].name = "PCI Memory Space";
+ res[1].flags = IORESOURCE_MEM;
+ res[1].start = ORION_PCI_MEM_BASE;
+ res[1].end = res[1].start + ORION_PCI_MEM_SIZE - 1;
+ if (request_resource(&iomem_resource, &res[1]))
+ panic("Request PCI Memory resource failed\n");
+ sys->resource[1] = &res[1];
+
+ sys->resource[2] = NULL;
+ sys->io_offset = 0;
+
+ return 1;
+}
+
+
+/*****************************************************************************
+ * General PCIE + PCI
+ ****************************************************************************/
+int orion_pci_sys_setup(int nr, struct pci_sys_data *sys)
+{
+ int ret = 0;
+
+ if (nr == 0) {
+ /*
+ * PCIE setup
+ */
+ orion_pcie_set_bus_nr(0);
+ ret = orion_pcie_setup(sys);
+ } else if (nr == 1) {
+ /*
+ * PCI setup
+ */
+ ret = orion_pci_setup(sys);
+ }
+
+ return ret;
+}
+
+struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys)
+{
+ struct pci_ops *ops;
+ struct pci_bus *bus;
+
+
+ if (nr == 0) {
+ u32 pci_bus;
+ /*
+ * PCIE scan
+ */
+ ops = &orion_pcie_ops;
+ bus = pci_scan_bus(sys->busnr, ops, sys);
+ /*
+ * Set local PCI bus number to follow PCIE bridges (if any)
+ */
+ pci_bus = bus->number + bus->subordinate - bus->secondary + 1;
+ orion_pci_set_bus_nr(pci_bus);
+ } else if (nr == 1) {
+ /*
+ * PCI scan
+ */
+ ops = &orion_pci_ops;
+ bus = pci_scan_bus(sys->busnr, ops, sys);
+ } else {
+ BUG();
+ bus = NULL;
+ }
+
+ return bus;
+}
diff --git a/arch/arm/mach-orion/rd88f5182-setup.c b/arch/arm/mach-orion/rd88f5182-setup.c
new file mode 100644
index 000000000000..026d74325d01
--- /dev/null
+++ b/arch/arm/mach-orion/rd88f5182-setup.c
@@ -0,0 +1,306 @@
+/*
+ * arch/arm/mach-orion/rd88f5182-setup.c
+ *
+ * Marvell Orion-NAS Reference Design Setup
+ *
+ * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/leds.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion.h>
+#include <asm/arch/platform.h>
+#include "common.h"
+
+/*****************************************************************************
+ * RD-88F5182 Info
+ ****************************************************************************/
+
+/*
+ * 512K NOR flash Device bus boot chip select
+ */
+
+#define RD88F5182_NOR_BOOT_BASE 0xf4000000
+#define RD88F5182_NOR_BOOT_SIZE SZ_512K
+
+/*
+ * 16M NOR flash on Device bus chip select 1
+ */
+
+#define RD88F5182_NOR_BASE 0xfc000000
+#define RD88F5182_NOR_SIZE SZ_16M
+
+/*
+ * PCI
+ */
+
+#define RD88F5182_PCI_SLOT0_OFFS 7
+#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7
+#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6
+
+/*
+ * GPIO Debug LED
+ */
+
+#define RD88F5182_GPIO_DBG_LED 0
+
+/*****************************************************************************
+ * 16M NOR Flash on Device bus CS1
+ ****************************************************************************/
+
+static struct physmap_flash_data rd88f5182_nor_flash_data = {
+ .width = 1,
+};
+
+static struct resource rd88f5182_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = RD88F5182_NOR_BASE,
+ .end = RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1,
+};
+
+static struct platform_device rd88f5182_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &rd88f5182_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &rd88f5182_nor_flash_resource,
+};
+
+#ifdef CONFIG_LEDS
+
+/*****************************************************************************
+ * Use GPIO debug led as CPU active indication
+ ****************************************************************************/
+
+static void rd88f5182_dbgled_event(led_event_t evt)
+{
+ int val;
+
+ if (evt == led_idle_end)
+ val = 1;
+ else if (evt == led_idle_start)
+ val = 0;
+ else
+ return;
+
+ gpio_set_value(RD88F5182_GPIO_DBG_LED, val);
+}
+
+static int __init rd88f5182_dbgled_init(void)
+{
+ int pin;
+
+ if (machine_is_rd88f5182()) {
+ pin = RD88F5182_GPIO_DBG_LED;
+
+ if (gpio_request(pin, "DBGLED") == 0) {
+ if (gpio_direction_output(pin, 0) != 0) {
+ printk(KERN_ERR "rd88f5182_dbgled_init failed "
+ "to set output pin %d\n", pin);
+ gpio_free(pin);
+ return 0;
+ }
+ } else {
+ printk(KERN_ERR "rd88f5182_dbgled_init failed "
+ "to request gpio %d\n", pin);
+ return 0;
+ }
+
+ leds_event = rd88f5182_dbgled_event;
+ }
+ return 0;
+}
+
+__initcall(rd88f5182_dbgled_init);
+
+#endif
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+void __init rd88f5182_pci_preinit(void)
+{
+ int pin;
+
+ /*
+ * Configure PCI GPIO IRQ pins
+ */
+ pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
+ if (gpio_request(pin, "PCI IntA") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit faield to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
+ }
+
+ pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
+ if (gpio_request(pin, "PCI IntB") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit faield to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
+ }
+}
+
+static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ /*
+ * PCI-E isn't used on the RD2
+ */
+ if (dev->bus->number == orion_pcie_local_bus_nr())
+ return IRQ_ORION_PCIE0_INT;
+
+ /*
+ * PCI IRQs are connected via GPIOs
+ */
+ switch (slot - RD88F5182_PCI_SLOT0_OFFS) {
+ case 0:
+ if (pin == 1)
+ return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN);
+ else
+ return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN);
+ default:
+ return -1;
+ }
+}
+
+static struct hw_pci rd88f5182_pci __initdata = {
+ .nr_controllers = 2,
+ .preinit = rd88f5182_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = orion_pci_sys_setup,
+ .scan = orion_pci_sys_scan_bus,
+ .map_irq = rd88f5182_pci_map_irq,
+};
+
+static int __init rd88f5182_pci_init(void)
+{
+ if (machine_is_rd88f5182())
+ pci_common_init(&rd88f5182_pci);
+
+ return 0;
+}
+
+subsys_initcall(rd88f5182_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data rd88f5182_eth_data = {
+ .phy_addr = 8,
+ .force_phy_addr = 1,
+};
+
+/*****************************************************************************
+ * RTC DS1338 on I2C bus
+ ****************************************************************************/
+static struct i2c_board_info __initdata rd88f5182_i2c_rtc = {
+ .driver_name = "rtc-ds1307",
+ .type = "ds1338",
+ .addr = 0x68,
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct platform_device *rd88f5182_devices[] __initdata = {
+ &rd88f5182_nor_flash,
+};
+
+static void __init rd88f5182_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion_init();
+
+ /*
+ * Setup the CPU address decode windows for our devices
+ */
+ orion_setup_cpu_win(ORION_DEV_BOOT, RD88F5182_NOR_BOOT_BASE,
+ RD88F5182_NOR_BOOT_SIZE, -1);
+ orion_setup_cpu_win(ORION_DEV1, RD88F5182_NOR_BASE,
+ RD88F5182_NOR_SIZE, -1);
+
+ /*
+ * Open a special address decode windows for the PCIE WA.
+ */
+ orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE);
+ orion_write(ORION_REGS_BASE | 0x20070, (0x7941 |
+ (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16));
+
+ /*
+ * Setup Multiplexing Pins --
+ * MPP[0] Debug Led (GPIO - Out)
+ * MPP[1] Debug Led (GPIO - Out)
+ * MPP[2] N/A
+ * MPP[3] RTC_Int (GPIO - In)
+ * MPP[4] GPIO
+ * MPP[5] GPIO
+ * MPP[6] PCI_intA (GPIO - In)
+ * MPP[7] PCI_intB (GPIO - In)
+ * MPP[8-11] N/A
+ * MPP[12] SATA 0 presence Indication
+ * MPP[13] SATA 1 presence Indication
+ * MPP[14] SATA 0 active Indication
+ * MPP[15] SATA 1 active indication
+ * MPP[16-19] Not used
+ * MPP[20] PCI Clock to MV88F5182
+ * MPP[21] PCI Clock to mini PCI CON11
+ * MPP[22] USB 0 over current indication
+ * MPP[23] USB 1 over current indication
+ * MPP[24] USB 1 over current enable
+ * MPP[25] USB 0 over current enable
+ */
+
+ orion_write(MPP_0_7_CTRL, 0x00000003);
+ orion_write(MPP_8_15_CTRL, 0x55550000);
+ orion_write(MPP_16_19_CTRL, 0x5555);
+
+ orion_gpio_set_valid_pins(0x000000fb);
+
+ platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices));
+ i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
+ orion_eth_init(&rd88f5182_eth_data);
+}
+
+MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
+ /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
+ .phys_io = ORION_REGS_BASE,
+ .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = rd88f5182_init,
+ .map_io = orion_map_io,
+ .init_irq = orion_init_irq,
+ .timer = &orion_timer,
+MACHINE_END
diff --git a/arch/arm/mach-orion/time.c b/arch/arm/mach-orion/time.c
new file mode 100644
index 000000000000..bd4262da4f40
--- /dev/null
+++ b/arch/arm/mach-orion/time.c
@@ -0,0 +1,181 @@
+/*
+ * arch/arm/mach-orion/time.c
+ *
+ * Core time functions for Marvell Orion System On Chip
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/mach/time.h>
+#include <asm/arch/orion.h>
+#include "common.h"
+
+/*
+ * Timer0: clock_event_device, Tick.
+ * Timer1: clocksource, Free running.
+ * WatchDog: Not used.
+ *
+ * Timers are counting down.
+ */
+#define CLOCKEVENT 0
+#define CLOCKSOURCE 1
+
+/*
+ * Timers bits
+ */
+#define BRIDGE_INT_TIMER(x) (1 << ((x) + 1))
+#define TIMER_EN(x) (1 << ((x) * 2))
+#define TIMER_RELOAD_EN(x) (1 << (((x) * 2) + 1))
+#define BRIDGE_INT_TIMER_WD (1 << 3)
+#define TIMER_WD_EN (1 << 4)
+#define TIMER_WD_RELOAD_EN (1 << 5)
+
+static cycle_t orion_clksrc_read(void)
+{
+ return (0xffffffff - orion_read(TIMER_VAL(CLOCKSOURCE)));
+}
+
+static struct clocksource orion_clksrc = {
+ .name = "orion_clocksource",
+ .shift = 20,
+ .rating = 300,
+ .read = orion_clksrc_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int
+orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev)
+{
+ unsigned long flags;
+
+ if (delta == 0)
+ return -ETIME;
+
+ local_irq_save(flags);
+
+ /*
+ * Clear and enable timer interrupt bit
+ */
+ orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT));
+ orion_setbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT));
+
+ /*
+ * Setup new timer value
+ */
+ orion_write(TIMER_VAL(CLOCKEVENT), delta);
+
+ /*
+ * Disable auto reload and kickoff the timer
+ */
+ orion_clrbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT));
+ orion_setbits(TIMER_CTRL, TIMER_EN(CLOCKEVENT));
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static void
+orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ if (mode == CLOCK_EVT_MODE_PERIODIC) {
+ /*
+ * Setup latch cycles in timer and enable reload interrupt.
+ */
+ orion_write(TIMER_VAL_RELOAD(CLOCKEVENT), LATCH);
+ orion_write(TIMER_VAL(CLOCKEVENT), LATCH);
+ orion_setbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT));
+ orion_setbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT) |
+ TIMER_EN(CLOCKEVENT));
+ } else {
+ /*
+ * Disable timer and interrupt
+ */
+ orion_clrbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT));
+ orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT));
+ orion_clrbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT) |
+ TIMER_EN(CLOCKEVENT));
+ }
+
+ local_irq_restore(flags);
+}
+
+static struct clock_event_device orion_clkevt = {
+ .name = "orion_tick",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .rating = 300,
+ .cpumask = CPU_MASK_CPU0,
+ .set_next_event = orion_clkevt_next_event,
+ .set_mode = orion_clkevt_mode,
+};
+
+static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
+{
+ /*
+ * Clear cause bit and do event
+ */
+ orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT));
+ orion_clkevt.event_handler(&orion_clkevt);
+ return IRQ_HANDLED;
+}
+
+static struct irqaction orion_timer_irq = {
+ .name = "orion_tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = orion_timer_interrupt
+};
+
+static void orion_timer_init(void)
+{
+ /*
+ * Setup clocksource free running timer (no interrupt on reload)
+ */
+ orion_write(TIMER_VAL(CLOCKSOURCE), 0xffffffff);
+ orion_write(TIMER_VAL_RELOAD(CLOCKSOURCE), 0xffffffff);
+ orion_clrbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKSOURCE));
+ orion_setbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKSOURCE) |
+ TIMER_EN(CLOCKSOURCE));
+
+ /*
+ * Register clocksource
+ */
+ orion_clksrc.mult =
+ clocksource_hz2mult(CLOCK_TICK_RATE, orion_clksrc.shift);
+
+ clocksource_register(&orion_clksrc);
+
+ /*
+ * Connect and enable tick handler
+ */
+ setup_irq(IRQ_ORION_BRIDGE, &orion_timer_irq);
+
+ /*
+ * Register clockevent
+ */
+ orion_clkevt.mult =
+ div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, orion_clkevt.shift);
+ orion_clkevt.max_delta_ns =
+ clockevent_delta2ns(0xfffffffe, &orion_clkevt);
+ orion_clkevt.min_delta_ns =
+ clockevent_delta2ns(1, &orion_clkevt);
+
+ clockevents_register_device(&orion_clkevt);
+}
+
+struct sys_timer orion_timer = {
+ .init = orion_timer_init,
+};
diff --git a/arch/arm/mach-orion/ts209-setup.c b/arch/arm/mach-orion/ts209-setup.c
new file mode 100644
index 000000000000..e3e930efd155
--- /dev/null
+++ b/arch/arm/mach-orion/ts209-setup.c
@@ -0,0 +1,335 @@
+/*
+ * QNAP TS-109/TS-209 Board Setup
+ *
+ * Maintainer: Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/serial_reg.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion.h>
+#include <asm/arch/platform.h>
+#include "common.h"
+
+#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
+#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M
+
+/****************************************************************************
+ * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
+ * partitions on the device because we want to keep compatability with
+ * existing QNAP firmware.
+ *
+ * Layout as used by QNAP:
+ * [2] 0x00000000-0x00200000 : "Kernel"
+ * [3] 0x00200000-0x00600000 : "RootFS1"
+ * [4] 0x00600000-0x00700000 : "RootFS2"
+ * [6] 0x00700000-0x00760000 : "NAS Config" (read-only)
+ * [5] 0x00760000-0x00780000 : "U-Boot Config"
+ * [1] 0x00780000-0x00800000 : "U-Boot" (read-only)
+ ***************************************************************************/
+static struct mtd_partition qnap_ts209_partitions[] = {
+ {
+ .name = "U-Boot",
+ .size = 0x00080000,
+ .offset = 0x00780000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "Kernel",
+ .size = 0x00200000,
+ .offset = 0,
+ }, {
+ .name = "RootFS1",
+ .size = 0x00400000,
+ .offset = 0x00200000,
+ }, {
+ .name = "RootFS2",
+ .size = 0x00100000,
+ .offset = 0x00600000,
+ }, {
+ .name = "U-Boot Config",
+ .size = 0x00020000,
+ .offset = 0x00760000,
+ }, {
+ .name = "NAS Config",
+ .size = 0x00060000,
+ .offset = 0x00700000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct physmap_flash_data qnap_ts209_nor_flash_data = {
+ .width = 1,
+ .parts = qnap_ts209_partitions,
+ .nr_parts = ARRAY_SIZE(qnap_ts209_partitions)
+};
+
+static struct resource qnap_ts209_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = QNAP_TS209_NOR_BOOT_BASE,
+ .end = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device qnap_ts209_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = { .platform_data = &qnap_ts209_nor_flash_data, },
+ .resource = &qnap_ts209_nor_flash_resource,
+ .num_resources = 1,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+#define QNAP_TS209_PCI_SLOT0_OFFS 7
+#define QNAP_TS209_PCI_SLOT0_IRQ_PIN 6
+#define QNAP_TS209_PCI_SLOT1_IRQ_PIN 7
+
+void __init qnap_ts209_pci_preinit(void)
+{
+ int pin;
+
+ /*
+ * Configure PCI GPIO IRQ pins
+ */
+ pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN;
+ if (gpio_request(pin, "PCI Int1") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+ } else {
+ printk(KERN_ERR "qnap_ts209_pci_preinit failed to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
+ "%d\n", pin);
+ }
+
+ pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN;
+ if (gpio_request(pin, "PCI Int2") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+ } else {
+ printk(KERN_ERR "qnap_ts209_pci_preinit failed "
+ "to set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
+ "%d\n", pin);
+ }
+}
+
+static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ /*
+ * PCIE IRQ is connected internally (not GPIO)
+ */
+ if (dev->bus->number == orion_pcie_local_bus_nr())
+ return IRQ_ORION_PCIE0_INT;
+
+ /*
+ * PCI IRQs are connected via GPIOs
+ */
+ switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) {
+ case 0:
+ return gpio_to_irq(QNAP_TS209_PCI_SLOT0_IRQ_PIN);
+ case 1:
+ return gpio_to_irq(QNAP_TS209_PCI_SLOT1_IRQ_PIN);
+ default:
+ return -1;
+ }
+}
+
+static struct hw_pci qnap_ts209_pci __initdata = {
+ .nr_controllers = 2,
+ .preinit = qnap_ts209_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = orion_pci_sys_setup,
+ .scan = orion_pci_sys_scan_bus,
+ .map_irq = qnap_ts209_pci_map_irq,
+};
+
+static int __init qnap_ts209_pci_init(void)
+{
+ if (machine_is_ts_x09())
+ pci_common_init(&qnap_ts209_pci);
+
+ return 0;
+}
+
+subsys_initcall(qnap_ts209_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data qnap_ts209_eth_data = {
+ .phy_addr = 8,
+ .force_phy_addr = 1,
+};
+
+/*****************************************************************************
+ * RTC S35390A on I2C bus
+ ****************************************************************************/
+static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = {
+ .driver_name = "rtc-s35390a",
+ .addr = 0x30,
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ * Power button is attached to the PIC microcontroller
+ ****************************************************************************/
+
+#define QNAP_TS209_GPIO_KEY_MEDIA 1
+#define QNAP_TS209_GPIO_KEY_RESET 2
+
+static struct gpio_keys_button qnap_ts209_buttons[] = {
+ {
+ .code = KEY_RESTART,
+ .gpio = QNAP_TS209_GPIO_KEY_MEDIA,
+ .desc = "USB Copy Button",
+ .active_low = 1,
+ },
+ {
+ .code = KEY_POWER,
+ .gpio = QNAP_TS209_GPIO_KEY_RESET,
+ .desc = "Reset Button",
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_platform_data qnap_ts209_button_data = {
+ .buttons = qnap_ts209_buttons,
+ .nbuttons = ARRAY_SIZE(qnap_ts209_buttons),
+};
+
+static struct platform_device qnap_ts209_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = { .platform_data = &qnap_ts209_button_data, },
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct platform_device *qnap_ts209_devices[] __initdata = {
+ &qnap_ts209_nor_flash,
+ &qnap_ts209_button_device,
+};
+
+/*
+ * QNAP TS-[12]09 specific power off method via UART1-attached PIC
+ */
+
+#define UART1_REG(x) (UART1_BASE + ((UART_##x) << 2))
+
+static void qnap_ts209_power_off(void)
+{
+ /* 19200 baud divisor */
+ const unsigned divisor = ((ORION_TCLK + (8 * 19200)) / (16 * 19200));
+
+ pr_info("%s: triggering power-off...\n", __func__);
+
+ /* hijack uart1 and reset into sane state (19200,8n1) */
+ orion_write(UART1_REG(LCR), 0x83);
+ orion_write(UART1_REG(DLL), divisor & 0xff);
+ orion_write(UART1_REG(DLM), (divisor >> 8) & 0xff);
+ orion_write(UART1_REG(LCR), 0x03);
+ orion_write(UART1_REG(IER), 0x00);
+ orion_write(UART1_REG(FCR), 0x00);
+ orion_write(UART1_REG(MCR), 0x00);
+
+ /* send the power-off command 'A' to PIC */
+ orion_write(UART1_REG(TX), 'A');
+}
+
+static void __init qnap_ts209_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion_init();
+
+ /*
+ * Setup flash mapping
+ */
+ orion_setup_cpu_win(ORION_DEV_BOOT, QNAP_TS209_NOR_BOOT_BASE,
+ QNAP_TS209_NOR_BOOT_SIZE, -1);
+
+ /*
+ * Open a special address decode windows for the PCIE WA.
+ */
+ orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE);
+ orion_write(ORION_REGS_BASE | 0x20070, (0x7941 |
+ (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16));
+
+ /*
+ * Setup Multiplexing Pins --
+ * MPP[0] Reserved
+ * MPP[1] USB copy button (0 active)
+ * MPP[2] Load defaults button (0 active)
+ * MPP[3] GPIO RTC
+ * MPP[4-5] Reserved
+ * MPP[6] PCI Int A
+ * MPP[7] PCI Int B
+ * MPP[8-11] Reserved
+ * MPP[12] SATA 0 presence
+ * MPP[13] SATA 1 presence
+ * MPP[14] SATA 0 active
+ * MPP[15] SATA 1 active
+ * MPP[16] UART1 RXD
+ * MPP[17] UART1 TXD
+ * MPP[18] SW_RST (0 active)
+ * MPP[19] Reserved
+ * MPP[20] PCI clock 0
+ * MPP[21] PCI clock 1
+ * MPP[22] USB 0 over current
+ * MPP[23-25] Reserved
+ */
+ orion_write(MPP_0_7_CTRL, 0x3);
+ orion_write(MPP_8_15_CTRL, 0x55550000);
+ orion_write(MPP_16_19_CTRL, 0x5500);
+ orion_gpio_set_valid_pins(0x3cc0fff);
+
+ /* register ts209 specific power-off method */
+ pm_power_off = qnap_ts209_power_off;
+
+ platform_add_devices(qnap_ts209_devices,
+ ARRAY_SIZE(qnap_ts209_devices));
+ i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
+ orion_eth_init(&qnap_ts209_eth_data);
+}
+
+MACHINE_START(TS209, "QNAP TS-109/TS-209")
+ /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
+ .phys_io = ORION_REGS_BASE,
+ .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = qnap_ts209_init,
+ .map_io = orion_map_io,
+ .init_irq = orion_init_irq,
+ .timer = &orion_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
index 67e05f005a6b..6d4ca8fc0cb4 100644
--- a/arch/arm/mach-pnx4008/time.c
+++ b/arch/arm/mach-pnx4008/time.c
@@ -51,8 +51,6 @@ static irqreturn_t pnx4008_timer_interrupt(int irq, void *dev_id)
{
if (__raw_readl(HSTIM_INT) & MATCH0_INT) {
- write_seqlock(&xtime_lock);
-
do {
timer_tick();
@@ -73,8 +71,6 @@ static irqreturn_t pnx4008_timer_interrupt(int irq, void *dev_id)
} while ((signed)
(__raw_readl(HSTIM_MATCH0) -
__raw_readl(HSTIM_COUNTER)) < 0);
-
- write_sequnlock(&xtime_lock);
}
return IRQ_HANDLED;
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 656d49661a29..0908bea0f609 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -51,6 +51,50 @@ config PXA_SHARPSL
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
+config ARCH_PXA_ESERIES
+ bool "PXA based Toshiba e-series PDAs"
+ select PXA25x
+
+config MACH_E330
+ bool "Toshiba e330"
+ default y
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e330 family PDA.
+
+config MACH_E740
+ bool "Toshiba e740"
+ default y
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e740 family PDA.
+
+config MACH_E750
+ bool "Toshiba e750"
+ default y
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e750 family PDA.
+
+config MACH_E400
+ bool "Toshiba e400"
+ default y
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e400 family PDA.
+
+config MACH_E800
+ bool "Toshiba e800"
+ default y
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e800 family PDA.
+
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
select PXA27x
@@ -59,15 +103,44 @@ config MACH_EM_X270
bool "CompuLab EM-x270 platform"
select PXA27x
+config MACH_COLIBRI
+ bool "Toradex Colibri PX27x"
+ select PXA27x
+
config MACH_ZYLONITE
bool "PXA3xx Development Platform"
select PXA3xx
+config MACH_LITTLETON
+ bool "PXA3xx Form Factor Platform (aka Littleton)"
+ select PXA3xx
+ select PXA_SSP
+
config MACH_ARMCORE
bool "CompuLab CM-X270 modules"
select PXA27x
select IWMMXT
+config MACH_MAGICIAN
+ bool "Enable HTC Magician Support"
+ depends on ARCH_PXA
+ select PXA27x
+ select IWMMXT
+
+config MACH_PCM027
+ bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
+ select PXA27x
+ select IWMMXT
+
+endchoice
+
+choice
+ prompt "Used baseboard"
+ depends on MACH_PCM027
+
+config MACH_PCM990_BASEBOARD
+ bool "PHYTEC PCM-990 development board"
+
endchoice
if PXA_SHARPSL
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 4263527e5123..6e0c4f5b5ae6 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -3,10 +3,11 @@
#
# Common support (must be linked before board specific support)
-obj-y += clock.o generic.o irq.o dma.o time.o
+obj-y += clock.o devices.o generic.o irq.o dma.o \
+ time.o gpio.o
obj-$(CONFIG_PXA25x) += pxa25x.o
obj-$(CONFIG_PXA27x) += pxa27x.o
-obj-$(CONFIG_PXA3xx) += pxa3xx.o mfp.o
+obj-$(CONFIG_PXA3xx) += pxa3xx.o mfp.o smemc.o
obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o
@@ -16,18 +17,24 @@ obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
+obj-$(CONFIG_MACH_COLIBRI) += colibri.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o
obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o
+obj-$(CONFIG_MACH_PCM027) += pcm027.o
+obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
+obj-$(CONFIG_MACH_MAGICIAN) += magician.o
+obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
ifeq ($(CONFIG_MACH_ZYLONITE),y)
obj-y += zylonite.o
obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o
obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o
endif
+obj-$(CONFIG_MACH_LITTLETON) += littleton.o
obj-$(CONFIG_MACH_ARMCORE) += cm-x270.o
@@ -41,13 +48,10 @@ led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o
obj-$(CONFIG_LEDS) += $(led-y)
# Misc features
-obj-$(CONFIG_PM) += pm.o sleep.o
+obj-$(CONFIG_PM) += pm.o sleep.o standby.o
+obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o
obj-$(CONFIG_PXA_SSP) += ssp.o
-ifeq ($(CONFIG_PXA27x),y)
-obj-$(CONFIG_PM) += standby.o
-endif
-
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
endif
diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c
index 12d2fe0ceff6..254892ac30cd 100644
--- a/arch/arm/mach-pxa/akita-ioexp.c
+++ b/arch/arm/mach-pxa/akita-ioexp.c
@@ -29,7 +29,7 @@
#define MAX7310_TIMEOUT 0x04
/* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x18, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x18, I2C_CLIENT_END };
/* I2C Magic */
I2C_CLIENT_INSMOD;
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
index 878d3b9b8633..15c4e0df3e10 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -40,7 +40,7 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
{
unsigned int sz = SZ_64M >> PAGE_SHIFT;
- printk(KERN_INFO "Adjusting zones for CM-x270\n");
+ pr_info("Adjusting zones for CM-x270\n");
/*
* Only adjust if > 64M on current system
@@ -104,8 +104,7 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
- printk(KERN_DEBUG "===> %s: %s slot=%x, pin=%x\n", __FUNCTION__,
- pci_name(dev), slot, pin);
+ dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __FUNCTION__, slot, pin);
irq = it8152_pci_map_irq(dev, slot, pin);
if (irq)
@@ -141,14 +140,13 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
return(0);
}
-static struct pci_bus * __init
-cmx270_pci_scan_bus(int nr, struct pci_sys_data *sys)
+static void cmx270_pci_preinit(void)
{
- printk(KERN_INFO "Initializing CM-X270 PCI subsystem\n");
+ pr_info("Initializing CM-X270 PCI subsystem\n");
__raw_writel(0x800, IT8152_PCI_CFG_ADDR);
if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) {
- printk(KERN_INFO "PCI Bridge found.\n");
+ pr_info("PCI Bridge found.\n");
/* set PCI I/O base at 0 */
writel(0x848, IT8152_PCI_CFG_ADDR);
@@ -163,7 +161,7 @@ cmx270_pci_scan_bus(int nr, struct pci_sys_data *sys)
/* CardBus Controller on ATXbase baseboard */
writel(0x4000, IT8152_PCI_CFG_ADDR);
if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) {
- printk(KERN_INFO "CardBus Bridge found.\n");
+ pr_info("CardBus Bridge found.\n");
/* Configure socket 0 */
writel(0x408C, IT8152_PCI_CFG_ADDR);
@@ -196,7 +194,6 @@ cmx270_pci_scan_bus(int nr, struct pci_sys_data *sys)
writel(0xb0000000, IT8152_PCI_CFG_DATA);
}
}
- return it8152_pci_scan_bus(nr, sys);
}
static struct hw_pci cmx270_pci __initdata = {
@@ -204,7 +201,8 @@ static struct hw_pci cmx270_pci __initdata = {
.map_irq = cmx270_pci_map_irq,
.nr_controllers = 1,
.setup = it8152_pci_setup,
- .scan = cmx270_pci_scan_bus,
+ .scan = it8152_pci_scan_bus,
+ .preinit = cmx270_pci_preinit,
};
static int __init cmx270_init_pci(void)
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 177664ccb2e2..6012177a29a3 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -29,6 +29,7 @@
#include <asm/mach/map.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/ohci.h>
#include <asm/arch/mmc.h>
@@ -487,18 +488,15 @@ static int cmx270_mci_init(struct device *dev,
/* card detect IRQ on GPIO 83 */
pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
- set_irq_type(CMX270_MMC_IRQ, IRQT_FALLING);
err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
- if (err) {
+ if (err)
printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
" request MMC card detect IRQ\n");
- return -1;
- }
- return 0;
+ return err;
}
static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
@@ -566,7 +564,7 @@ static int cmx270_resume(struct sys_device *dev)
}
static struct sysdev_class cmx270_pm_sysclass = {
- set_kset_name("pm"),
+ .name = "pm",
.resume = cmx270_resume,
.suspend = cmx270_suspend,
};
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
new file mode 100644
index 000000000000..6db54e31c397
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri.c
@@ -0,0 +1,134 @@
+/*
+ * linux/arch/arm/mach-pxa/colibri.c
+ *
+ * Support for Toradex PXA27x based Colibri module
+ * Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/colibri.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/*
+ * Flash
+ */
+static struct mtd_partition colibri_partitions[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0x00000000,
+ .size = 0x00040000,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ }, {
+ .name = "Kernel",
+ .offset = 0x00040000,
+ .size = 0x00400000,
+ .mask_flags = 0
+ }, {
+ .name = "Rootfs",
+ .offset = 0x00440000,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct physmap_flash_data colibri_flash_data[] = {
+ {
+ .width = 4, /* bankwidth in bytes */
+ .parts = colibri_partitions,
+ .nr_parts = ARRAY_SIZE(colibri_partitions)
+ }
+};
+
+static struct resource flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = colibri_flash_data,
+ },
+ .resource = &flash_resource,
+ .num_resources = 1,
+};
+
+/*
+ * DM9000 Ethernet
+ */
+static struct resource dm9000_resources[] = {
+ [0] = {
+ .start = COLIBRI_ETH_PHYS,
+ .end = COLIBRI_ETH_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = COLIBRI_ETH_PHYS + 4,
+ .end = COLIBRI_ETH_PHYS + 4 + 500,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = COLIBRI_ETH_IRQ,
+ .end = COLIBRI_ETH_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dm9000_device = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm9000_resources),
+ .resource = dm9000_resources,
+};
+
+static struct platform_device *colibri_devices[] __initdata = {
+ &flash_device,
+ &dm9000_device,
+};
+
+static void __init colibri_init(void)
+{
+ /* DM9000 LAN */
+ pxa_gpio_mode(GPIO78_nCS_2_MD);
+ pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
+ set_irq_type(COLIBRI_ETH_IRQ, IRQT_FALLING);
+
+ platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
+}
+
+MACHINE_START(COLIBRI, "Toradex Colibri PXA27x")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = COLIBRI_SDRAM_BASE + 0x100,
+ .init_machine = colibri_init,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 2363cc64fe07..9292576b83b3 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -21,6 +21,7 @@
#include <linux/mmc/host.h>
#include <linux/pm.h>
#include <linux/backlight.h>
+#include <video/w100fb.h>
#include <asm/setup.h>
#include <asm/memory.h>
@@ -141,6 +142,136 @@ struct corgissp_machinfo corgi_ssp_machinfo = {
/*
+ * LCD/Framebuffer
+ */
+static void w100_lcdtg_suspend(struct w100fb_par *par)
+{
+ corgi_lcdtg_suspend();
+}
+
+static void w100_lcdtg_init(struct w100fb_par *par)
+{
+ corgi_lcdtg_hw_init(par->xres);
+}
+
+
+static struct w100_tg_info corgi_lcdtg_info = {
+ .change = w100_lcdtg_init,
+ .suspend = w100_lcdtg_suspend,
+ .resume = w100_lcdtg_init,
+};
+
+static struct w100_mem_info corgi_fb_mem = {
+ .ext_cntl = 0x00040003,
+ .sdram_mode_reg = 0x00650021,
+ .ext_timing_cntl = 0x10002a4a,
+ .io_cntl = 0x7ff87012,
+ .size = 0x1fffff,
+};
+
+static struct w100_gen_regs corgi_fb_regs = {
+ .lcd_format = 0x00000003,
+ .lcdd_cntl1 = 0x01CC0000,
+ .lcdd_cntl2 = 0x0003FFFF,
+ .genlcd_cntl1 = 0x00FFFF0D,
+ .genlcd_cntl2 = 0x003F3003,
+ .genlcd_cntl3 = 0x000102aa,
+};
+
+static struct w100_gpio_regs corgi_fb_gpio = {
+ .init_data1 = 0x000000bf,
+ .init_data2 = 0x00000000,
+ .gpio_dir1 = 0x00000000,
+ .gpio_oe1 = 0x03c0feff,
+ .gpio_dir2 = 0x00000000,
+ .gpio_oe2 = 0x00000000,
+};
+
+static struct w100_mode corgi_fb_modes[] = {
+{
+ .xres = 480,
+ .yres = 640,
+ .left_margin = 0x56,
+ .right_margin = 0x55,
+ .upper_margin = 0x03,
+ .lower_margin = 0x00,
+ .crtc_ss = 0x82360056,
+ .crtc_ls = 0xA0280000,
+ .crtc_gs = 0x80280028,
+ .crtc_vpos_gs = 0x02830002,
+ .crtc_rev = 0x00400008,
+ .crtc_dclk = 0xA0000000,
+ .crtc_gclk = 0x8015010F,
+ .crtc_goe = 0x80100110,
+ .crtc_ps1_active = 0x41060010,
+ .pll_freq = 75,
+ .fast_pll_freq = 100,
+ .sysclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .pixclk_src = CLK_SRC_PLL,
+ .pixclk_divider = 2,
+ .pixclk_divider_rotated = 6,
+},{
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 0x27,
+ .right_margin = 0x2e,
+ .upper_margin = 0x01,
+ .lower_margin = 0x00,
+ .crtc_ss = 0x81170027,
+ .crtc_ls = 0xA0140000,
+ .crtc_gs = 0xC0140014,
+ .crtc_vpos_gs = 0x00010141,
+ .crtc_rev = 0x00400008,
+ .crtc_dclk = 0xA0000000,
+ .crtc_gclk = 0x8015010F,
+ .crtc_goe = 0x80100110,
+ .crtc_ps1_active = 0x41060010,
+ .pll_freq = 0,
+ .fast_pll_freq = 0,
+ .sysclk_src = CLK_SRC_XTAL,
+ .sysclk_divider = 0,
+ .pixclk_src = CLK_SRC_XTAL,
+ .pixclk_divider = 1,
+ .pixclk_divider_rotated = 1,
+},
+
+};
+
+static struct w100fb_mach_info corgi_fb_info = {
+ .tg = &corgi_lcdtg_info,
+ .init_mode = INIT_MODE_ROTATED,
+ .mem = &corgi_fb_mem,
+ .regs = &corgi_fb_regs,
+ .modelist = &corgi_fb_modes[0],
+ .num_modes = 2,
+ .gpio = &corgi_fb_gpio,
+ .xtal_freq = 12500000,
+ .xtal_dbl = 0,
+};
+
+static struct resource corgi_fb_resources[] = {
+ [0] = {
+ .start = 0x08000000,
+ .end = 0x08ffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device corgifb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(corgi_fb_resources),
+ .resource = corgi_fb_resources,
+ .dev = {
+ .platform_data = &corgi_fb_info,
+ .parent = &corgissp_device.dev,
+ },
+
+};
+
+
+/*
* Corgi Backlight Device
*/
static void corgi_bl_kick_battery(void)
@@ -154,6 +285,21 @@ static void corgi_bl_kick_battery(void)
}
}
+static void corgi_bl_set_intensity(int intensity)
+{
+ if (intensity > 0x10)
+ intensity += 0x10;
+
+ /* Bits 0-4 are accessed via the SSP interface */
+ corgi_ssp_blduty_set(intensity & 0x1f);
+
+ /* Bit 5 is via SCOOP */
+ if (intensity & 0x0020)
+ set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
+ else
+ reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
+}
+
static struct generic_bl_info corgi_bl_machinfo = {
.name = "corgi-bl",
.max_intensity = 0x2f,
@@ -190,9 +336,40 @@ static struct platform_device corgiled_device = {
.id = -1,
};
+
/*
* Corgi Touch Screen Device
*/
+static unsigned long (*get_hsync_invperiod)(struct device *dev);
+
+static void inline sharpsl_wait_sync(int gpio)
+{
+ while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
+ while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
+}
+
+static unsigned long corgi_get_hsync_invperiod(void)
+{
+ if (!get_hsync_invperiod)
+ get_hsync_invperiod = symbol_get(w100fb_get_hsynclen);
+ if (!get_hsync_invperiod)
+ return 0;
+
+ return get_hsync_invperiod(&corgifb_device.dev);
+}
+
+static void corgi_put_hsync(void)
+{
+ if (get_hsync_invperiod)
+ symbol_put(w100fb_get_hsynclen);
+ get_hsync_invperiod = NULL;
+}
+
+static void corgi_wait_hsync(void)
+{
+ sharpsl_wait_sync(CORGI_GPIO_HSYNC);
+}
+
static struct resource corgits_resources[] = {
[0] = {
.start = CORGI_IRQ_GPIO_TP_INT,
@@ -202,9 +379,9 @@ static struct resource corgits_resources[] = {
};
static struct corgits_machinfo corgi_ts_machinfo = {
- .get_hsync_len = corgi_get_hsync_len,
- .put_hsync = corgi_put_hsync,
- .wait_hsync = corgi_wait_hsync,
+ .get_hsync_invperiod = corgi_get_hsync_invperiod,
+ .put_hsync = corgi_put_hsync,
+ .wait_hsync = corgi_wait_hsync,
};
static struct platform_device corgits_device = {
@@ -242,12 +419,10 @@ static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, vo
err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
- if (err) {
+ if (err)
printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
- return -1;
- }
- return 0;
+ return err;
}
static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index 365b9435f748..9328df37afd1 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -173,7 +173,7 @@ static void lcdtg_set_phadadj(int mode)
static int lcd_inited;
-static void lcdtg_hw_init(int mode)
+void corgi_lcdtg_hw_init(int mode)
{
if (!lcd_inited) {
int comadj;
@@ -254,7 +254,7 @@ static void lcdtg_hw_init(int mode)
}
}
-static void lcdtg_suspend(void)
+void corgi_lcdtg_suspend(void)
{
/* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
mdelay(34);
@@ -288,298 +288,3 @@ static void lcdtg_suspend(void)
lcd_inited = 0;
}
-
-/*
- * Corgi w100 Frame Buffer Device
- */
-#ifdef CONFIG_PXA_SHARP_C7xx
-
-#include <video/w100fb.h>
-
-static void w100_lcdtg_suspend(struct w100fb_par *par)
-{
- lcdtg_suspend();
-}
-
-static void w100_lcdtg_init(struct w100fb_par *par)
-{
- lcdtg_hw_init(par->xres);
-}
-
-
-static struct w100_tg_info corgi_lcdtg_info = {
- .change = w100_lcdtg_init,
- .suspend = w100_lcdtg_suspend,
- .resume = w100_lcdtg_init,
-};
-
-static struct w100_mem_info corgi_fb_mem = {
- .ext_cntl = 0x00040003,
- .sdram_mode_reg = 0x00650021,
- .ext_timing_cntl = 0x10002a4a,
- .io_cntl = 0x7ff87012,
- .size = 0x1fffff,
-};
-
-static struct w100_gen_regs corgi_fb_regs = {
- .lcd_format = 0x00000003,
- .lcdd_cntl1 = 0x01CC0000,
- .lcdd_cntl2 = 0x0003FFFF,
- .genlcd_cntl1 = 0x00FFFF0D,
- .genlcd_cntl2 = 0x003F3003,
- .genlcd_cntl3 = 0x000102aa,
-};
-
-static struct w100_gpio_regs corgi_fb_gpio = {
- .init_data1 = 0x000000bf,
- .init_data2 = 0x00000000,
- .gpio_dir1 = 0x00000000,
- .gpio_oe1 = 0x03c0feff,
- .gpio_dir2 = 0x00000000,
- .gpio_oe2 = 0x00000000,
-};
-
-static struct w100_mode corgi_fb_modes[] = {
-{
- .xres = 480,
- .yres = 640,
- .left_margin = 0x56,
- .right_margin = 0x55,
- .upper_margin = 0x03,
- .lower_margin = 0x00,
- .crtc_ss = 0x82360056,
- .crtc_ls = 0xA0280000,
- .crtc_gs = 0x80280028,
- .crtc_vpos_gs = 0x02830002,
- .crtc_rev = 0x00400008,
- .crtc_dclk = 0xA0000000,
- .crtc_gclk = 0x8015010F,
- .crtc_goe = 0x80100110,
- .crtc_ps1_active = 0x41060010,
- .pll_freq = 75,
- .fast_pll_freq = 100,
- .sysclk_src = CLK_SRC_PLL,
- .sysclk_divider = 0,
- .pixclk_src = CLK_SRC_PLL,
- .pixclk_divider = 2,
- .pixclk_divider_rotated = 6,
-},{
- .xres = 240,
- .yres = 320,
- .left_margin = 0x27,
- .right_margin = 0x2e,
- .upper_margin = 0x01,
- .lower_margin = 0x00,
- .crtc_ss = 0x81170027,
- .crtc_ls = 0xA0140000,
- .crtc_gs = 0xC0140014,
- .crtc_vpos_gs = 0x00010141,
- .crtc_rev = 0x00400008,
- .crtc_dclk = 0xA0000000,
- .crtc_gclk = 0x8015010F,
- .crtc_goe = 0x80100110,
- .crtc_ps1_active = 0x41060010,
- .pll_freq = 0,
- .fast_pll_freq = 0,
- .sysclk_src = CLK_SRC_XTAL,
- .sysclk_divider = 0,
- .pixclk_src = CLK_SRC_XTAL,
- .pixclk_divider = 1,
- .pixclk_divider_rotated = 1,
-},
-
-};
-
-static struct w100fb_mach_info corgi_fb_info = {
- .tg = &corgi_lcdtg_info,
- .init_mode = INIT_MODE_ROTATED,
- .mem = &corgi_fb_mem,
- .regs = &corgi_fb_regs,
- .modelist = &corgi_fb_modes[0],
- .num_modes = 2,
- .gpio = &corgi_fb_gpio,
- .xtal_freq = 12500000,
- .xtal_dbl = 0,
-};
-
-static struct resource corgi_fb_resources[] = {
- [0] = {
- .start = 0x08000000,
- .end = 0x08ffffff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device corgifb_device = {
- .name = "w100fb",
- .id = -1,
- .num_resources = ARRAY_SIZE(corgi_fb_resources),
- .resource = corgi_fb_resources,
- .dev = {
- .platform_data = &corgi_fb_info,
- .parent = &corgissp_device.dev,
- },
-
-};
-#endif
-
-
-/*
- * Spitz PXA Frame Buffer Device
- */
-#ifdef CONFIG_PXA_SHARP_Cxx00
-
-#include <asm/arch/pxafb.h>
-
-void spitz_lcd_power(int on, struct fb_var_screeninfo *var)
-{
- if (on)
- lcdtg_hw_init(var->xres);
- else
- lcdtg_suspend();
-}
-
-#endif
-
-
-/*
- * Corgi/Spitz Touchscreen to LCD interface
- */
-static unsigned long (*get_hsync_time)(struct device *dev);
-
-static void inline sharpsl_wait_sync(int gpio)
-{
- while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
- while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
-}
-
-#ifdef CONFIG_PXA_SHARP_C7xx
-unsigned long corgi_get_hsync_len(void)
-{
- if (!get_hsync_time)
- get_hsync_time = symbol_get(w100fb_get_hsynclen);
- if (!get_hsync_time)
- return 0;
-
- return get_hsync_time(&corgifb_device.dev);
-}
-
-void corgi_put_hsync(void)
-{
- if (get_hsync_time)
- symbol_put(w100fb_get_hsynclen);
- get_hsync_time = NULL;
-}
-
-void corgi_wait_hsync(void)
-{
- sharpsl_wait_sync(CORGI_GPIO_HSYNC);
-}
-#endif
-
-#ifdef CONFIG_PXA_SHARP_Cxx00
-static struct device *spitz_pxafb_dev;
-
-static int is_pxafb_device(struct device * dev, void * data)
-{
- struct platform_device *pdev = container_of(dev, struct platform_device, dev);
-
- return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
-}
-
-unsigned long spitz_get_hsync_len(void)
-{
-#ifdef CONFIG_FB_PXA
- if (!spitz_pxafb_dev) {
- spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
- if (!spitz_pxafb_dev)
- return 0;
- }
- if (!get_hsync_time)
- get_hsync_time = symbol_get(pxafb_get_hsync_time);
- if (!get_hsync_time)
-#endif
- return 0;
-
- return pxafb_get_hsync_time(spitz_pxafb_dev);
-}
-
-void spitz_put_hsync(void)
-{
- put_device(spitz_pxafb_dev);
- if (get_hsync_time)
- symbol_put(pxafb_get_hsync_time);
- spitz_pxafb_dev = NULL;
- get_hsync_time = NULL;
-}
-
-void spitz_wait_hsync(void)
-{
- sharpsl_wait_sync(SPITZ_GPIO_HSYNC);
-}
-#endif
-
-/*
- * Corgi/Spitz Backlight Power
- */
-#ifdef CONFIG_PXA_SHARP_C7xx
-void corgi_bl_set_intensity(int intensity)
-{
- if (intensity > 0x10)
- intensity += 0x10;
-
- /* Bits 0-4 are accessed via the SSP interface */
- corgi_ssp_blduty_set(intensity & 0x1f);
-
- /* Bit 5 is via SCOOP */
- if (intensity & 0x0020)
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
- else
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
-}
-#endif
-
-
-#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
-void spitz_bl_set_intensity(int intensity)
-{
- if (intensity > 0x10)
- intensity += 0x10;
-
- /* Bits 0-4 are accessed via the SSP interface */
- corgi_ssp_blduty_set(intensity & 0x1f);
-
- /* Bit 5 is via SCOOP */
- if (intensity & 0x0020)
- reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
- else
- set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
-
- if (intensity)
- set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
- else
- reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
-}
-#endif
-
-#ifdef CONFIG_MACH_AKITA
-void akita_bl_set_intensity(int intensity)
-{
- if (intensity > 0x10)
- intensity += 0x10;
-
- /* Bits 0-4 are accessed via the SSP interface */
- corgi_ssp_blduty_set(intensity & 0x1f);
-
- /* Bit 5 is via IO-Expander */
- if (intensity & 0x0020)
- akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
- else
- akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
-
- if (intensity)
- akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
- else
- akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
-}
-#endif
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 40dea3d5142b..31706224a04c 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -21,6 +21,7 @@
#include <asm/arch/ssp.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/regs-ssp.h>
#include "sharpsl.h"
static DEFINE_SPINLOCK(corgi_ssp_lock);
@@ -31,7 +32,7 @@ static struct corgissp_machinfo *ssp_machinfo;
/*
* There are three devices connected to the SSP interface:
* 1. A touchscreen controller (TI ADS7846 compatible)
- * 2. An LCD contoller (with some Backlight functionality)
+ * 2. An LCD controller (with some Backlight functionality)
* 3. A battery monitoring IC (Maxim MAX1111)
*
* Each device uses a different speed/mode of communication.
diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c
new file mode 100644
index 000000000000..cbc583beedc8
--- /dev/null
+++ b/arch/arm/mach-pxa/cpu-pxa.c
@@ -0,0 +1,294 @@
+/*
+ * linux/arch/arm/mach-pxa/cpu-pxa.c
+ *
+ * Copyright (C) 2002,2003 Intrinsyc Software
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * History:
+ * 31-Jul-2002 : Initial version [FB]
+ * 29-Jan-2003 : added PXA255 support [FB]
+ * 20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.)
+ *
+ * Note:
+ * This driver may change the memory bus clock rate, but will not do any
+ * platform specific access timing changes... for example if you have flash
+ * memory connected to CS0, you will need to register a platform specific
+ * notifier which will adjust the memory access strobes to maintain a
+ * minimum strobe width.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
+
+#ifdef DEBUG
+static unsigned int freq_debug;
+MODULE_PARM(freq_debug, "i");
+MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
+#else
+#define freq_debug 0
+#endif
+
+typedef struct {
+ unsigned int khz;
+ unsigned int membus;
+ unsigned int cccr;
+ unsigned int div2;
+} pxa_freqs_t;
+
+/* Define the refresh period in mSec for the SDRAM and the number of rows */
+#define SDRAM_TREF 64 /* standard 64ms SDRAM */
+#define SDRAM_ROWS 4096 /* 64MB=8192 32MB=4096 */
+#define MDREFR_DRI(x) (((x) * SDRAM_TREF) / (SDRAM_ROWS * 32))
+
+#define CCLKCFG_TURBO 0x1
+#define CCLKCFG_FCS 0x2
+#define PXA25x_MIN_FREQ 99500
+#define PXA25x_MAX_FREQ 398100
+#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
+#define MDREFR_DRI_MASK 0xFFF
+
+
+/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
+static pxa_freqs_t pxa255_run_freqs[] =
+{
+ /* CPU MEMBUS CCCR DIV2*/
+ { 99500, 99500, 0x121, 1}, /* run= 99, turbo= 99, PXbus=50, SDRAM=50 */
+ {132700, 132700, 0x123, 1}, /* run=133, turbo=133, PXbus=66, SDRAM=66 */
+ {199100, 99500, 0x141, 0}, /* run=199, turbo=199, PXbus=99, SDRAM=99 */
+ {265400, 132700, 0x143, 1}, /* run=265, turbo=265, PXbus=133, SDRAM=66 */
+ {331800, 165900, 0x145, 1}, /* run=331, turbo=331, PXbus=166, SDRAM=83 */
+ {398100, 99500, 0x161, 0}, /* run=398, turbo=398, PXbus=196, SDRAM=99 */
+ {0,}
+};
+#define NUM_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
+
+static struct cpufreq_frequency_table pxa255_run_freq_table[NUM_RUN_FREQS+1];
+
+/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
+static pxa_freqs_t pxa255_turbo_freqs[] =
+{
+ /* CPU MEMBUS CCCR DIV2*/
+ { 99500, 99500, 0x121, 1}, /* run=99, turbo= 99, PXbus=50, SDRAM=50 */
+ {199100, 99500, 0x221, 0}, /* run=99, turbo=199, PXbus=50, SDRAM=99 */
+ {298500, 99500, 0x321, 0}, /* run=99, turbo=287, PXbus=50, SDRAM=99 */
+ {298600, 99500, 0x1c1, 0}, /* run=199, turbo=287, PXbus=99, SDRAM=99 */
+ {398100, 99500, 0x241, 0}, /* run=199, turbo=398, PXbus=99, SDRAM=99 */
+ {0,}
+};
+#define NUM_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
+
+static struct cpufreq_frequency_table pxa255_turbo_freq_table[NUM_TURBO_FREQS+1];
+
+extern unsigned get_clk_frequency_khz(int info);
+
+/* find a valid frequency point */
+static int pxa_verify_policy(struct cpufreq_policy *policy)
+{
+ struct cpufreq_frequency_table *pxa_freqs_table;
+ int ret;
+
+ if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
+ pxa_freqs_table = pxa255_run_freq_table;
+ } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
+ pxa_freqs_table = pxa255_turbo_freq_table;
+ } else {
+ printk("CPU PXA: Unknown policy found. "
+ "Using CPUFREQ_POLICY_PERFORMANCE\n");
+ pxa_freqs_table = pxa255_run_freq_table;
+ }
+
+ ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
+
+ if (freq_debug)
+ pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n",
+ policy->min, policy->max);
+
+ return ret;
+}
+
+static int pxa_set_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct cpufreq_frequency_table *pxa_freqs_table;
+ pxa_freqs_t *pxa_freq_settings;
+ struct cpufreq_freqs freqs;
+ int idx;
+ unsigned long flags;
+ unsigned int unused, preset_mdrefr, postset_mdrefr;
+ void *ramstart = phys_to_virt(0xa0000000);
+
+ /* Get the current policy */
+ if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
+ pxa_freq_settings = pxa255_run_freqs;
+ pxa_freqs_table = pxa255_run_freq_table;
+ } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
+ pxa_freq_settings = pxa255_turbo_freqs;
+ pxa_freqs_table = pxa255_turbo_freq_table;
+ } else {
+ printk("CPU PXA: Unknown policy found. "
+ "Using CPUFREQ_POLICY_PERFORMANCE\n");
+ pxa_freq_settings = pxa255_run_freqs;
+ pxa_freqs_table = pxa255_run_freq_table;
+ }
+
+ /* Lookup the next frequency */
+ if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
+ target_freq, relation, &idx)) {
+ return -EINVAL;
+ }
+
+ freqs.old = policy->cur;
+ freqs.new = pxa_freq_settings[idx].khz;
+ freqs.cpu = policy->cpu;
+
+ if (freq_debug)
+ pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
+ freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
+ (pxa_freq_settings[idx].membus / 2000) :
+ (pxa_freq_settings[idx].membus / 1000));
+
+ /*
+ * Tell everyone what we're about to do...
+ * you should add a notify client with any platform specific
+ * Vcc changing capability
+ */
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ /* Calculate the next MDREFR. If we're slowing down the SDRAM clock
+ * we need to preset the smaller DRI before the change. If we're speeding
+ * up we need to set the larger DRI value after the change.
+ */
+ preset_mdrefr = postset_mdrefr = MDREFR;
+ if ((MDREFR & MDREFR_DRI_MASK) > MDREFR_DRI(pxa_freq_settings[idx].membus)) {
+ preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK) |
+ MDREFR_DRI(pxa_freq_settings[idx].membus);
+ }
+ postset_mdrefr = (postset_mdrefr & ~MDREFR_DRI_MASK) |
+ MDREFR_DRI(pxa_freq_settings[idx].membus);
+
+ /* If we're dividing the memory clock by two for the SDRAM clock, this
+ * must be set prior to the change. Clearing the divide must be done
+ * after the change.
+ */
+ if (pxa_freq_settings[idx].div2) {
+ preset_mdrefr |= MDREFR_DB2_MASK;
+ postset_mdrefr |= MDREFR_DB2_MASK;
+ } else {
+ postset_mdrefr &= ~MDREFR_DB2_MASK;
+ }
+
+ local_irq_save(flags);
+
+ /* Set new the CCCR */
+ CCCR = pxa_freq_settings[idx].cccr;
+
+ asm volatile(" \n\
+ ldr r4, [%1] /* load MDREFR */ \n\
+ b 2f \n\
+ .align 5 \n\
+1: \n\
+ str %4, [%1] /* preset the MDREFR */ \n\
+ mcr p14, 0, %2, c6, c0, 0 /* set CCLKCFG[FCS] */ \n\
+ str %5, [%1] /* postset the MDREFR */ \n\
+ \n\
+ b 3f \n\
+2: b 1b \n\
+3: nop \n\
+ "
+ : "=&r" (unused)
+ : "r" (&MDREFR), "r" (CCLKCFG_TURBO|CCLKCFG_FCS), "r" (ramstart),
+ "r" (preset_mdrefr), "r" (postset_mdrefr)
+ : "r4", "r5");
+ local_irq_restore(flags);
+
+ /*
+ * Tell everyone what we've just done...
+ * you should add a notify client with any platform specific
+ * SDRAM refresh timer adjustments
+ */
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ return 0;
+}
+
+static int pxa_cpufreq_init(struct cpufreq_policy *policy)
+{
+ int i;
+
+ /* set default policy and cpuinfo */
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ policy->policy = CPUFREQ_POLICY_PERFORMANCE;
+ policy->cpuinfo.max_freq = PXA25x_MAX_FREQ;
+ policy->cpuinfo.min_freq = PXA25x_MIN_FREQ;
+ policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
+ policy->cur = get_clk_frequency_khz(0); /* current freq */
+ policy->min = policy->max = policy->cur;
+
+ /* Generate the run cpufreq_frequency_table struct */
+ for (i = 0; i < NUM_RUN_FREQS; i++) {
+ pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
+ pxa255_run_freq_table[i].index = i;
+ }
+
+ pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
+ /* Generate the turbo cpufreq_frequency_table struct */
+ for (i = 0; i < NUM_TURBO_FREQS; i++) {
+ pxa255_turbo_freq_table[i].frequency = pxa255_turbo_freqs[i].khz;
+ pxa255_turbo_freq_table[i].index = i;
+ }
+ pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+ printk(KERN_INFO "PXA CPU frequency change support initialized\n");
+
+ return 0;
+}
+
+static struct cpufreq_driver pxa_cpufreq_driver = {
+ .verify = pxa_verify_policy,
+ .target = pxa_set_target,
+ .init = pxa_cpufreq_init,
+ .name = "PXA25x",
+};
+
+static int __init pxa_cpu_init(void)
+{
+ int ret = -ENODEV;
+ if (cpu_is_pxa25x())
+ ret = cpufreq_register_driver(&pxa_cpufreq_driver);
+ return ret;
+}
+
+static void __exit pxa_cpu_exit(void)
+{
+ if (cpu_is_pxa25x())
+ cpufreq_unregister_driver(&pxa_cpufreq_driver);
+}
+
+
+MODULE_AUTHOR ("Intrinsyc Software Inc.");
+MODULE_DESCRIPTION ("CPU frequency changing driver for the PXA architecture");
+MODULE_LICENSE("GPL");
+module_init(pxa_cpu_init);
+module_exit(pxa_cpu_exit);
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
new file mode 100644
index 000000000000..bfccb80ac8ef
--- /dev/null
+++ b/arch/arm/mach-pxa/devices.c
@@ -0,0 +1,663 @@
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/udc.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/i2c.h>
+#include <asm/arch/ohci.h>
+
+#include "devices.h"
+
+void __init pxa_register_device(struct platform_device *dev, void *data)
+{
+ int ret;
+
+ dev->dev.platform_data = data;
+
+ ret = platform_device_register(dev);
+ if (ret)
+ dev_err(&dev->dev, "unable to register device: %d\n", ret);
+}
+
+static struct resource pxamci_resources[] = {
+ [0] = {
+ .start = 0x41100000,
+ .end = 0x41100fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_MMC,
+ .end = IRQ_MMC,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = 21,
+ .end = 21,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = 22,
+ .end = 22,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static u64 pxamci_dmamask = 0xffffffffUL;
+
+struct platform_device pxa_device_mci = {
+ .name = "pxa2xx-mci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &pxamci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxamci_resources),
+ .resource = pxamci_resources,
+};
+
+void __init pxa_set_mci_info(struct pxamci_platform_data *info)
+{
+ pxa_register_device(&pxa_device_mci, info);
+}
+
+
+static struct pxa2xx_udc_mach_info pxa_udc_info;
+
+void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
+{
+ memcpy(&pxa_udc_info, info, sizeof *info);
+}
+
+static struct resource pxa2xx_udc_resources[] = {
+ [0] = {
+ .start = 0x40600000,
+ .end = 0x4060ffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USB,
+ .end = IRQ_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 udc_dma_mask = ~(u32)0;
+
+struct platform_device pxa_device_udc = {
+ .name = "pxa2xx-udc",
+ .id = -1,
+ .resource = pxa2xx_udc_resources,
+ .num_resources = ARRAY_SIZE(pxa2xx_udc_resources),
+ .dev = {
+ .platform_data = &pxa_udc_info,
+ .dma_mask = &udc_dma_mask,
+ }
+};
+
+static struct resource pxafb_resources[] = {
+ [0] = {
+ .start = 0x44000000,
+ .end = 0x4400ffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_LCD,
+ .end = IRQ_LCD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 fb_dma_mask = ~(u64)0;
+
+struct platform_device pxa_device_fb = {
+ .name = "pxa2xx-fb",
+ .id = -1,
+ .dev = {
+ .dma_mask = &fb_dma_mask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxafb_resources),
+ .resource = pxafb_resources,
+};
+
+void __init set_pxa_fb_info(struct pxafb_mach_info *info)
+{
+ pxa_register_device(&pxa_device_fb, info);
+}
+
+void __init set_pxa_fb_parent(struct device *parent_dev)
+{
+ pxa_device_fb.dev.parent = parent_dev;
+}
+
+static struct resource pxa_resource_ffuart[] = {
+ {
+ .start = __PREG(FFUART),
+ .end = __PREG(FFUART) + 35,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_FFUART,
+ .end = IRQ_FFUART,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device pxa_device_ffuart= {
+ .name = "pxa2xx-uart",
+ .id = 0,
+ .resource = pxa_resource_ffuart,
+ .num_resources = ARRAY_SIZE(pxa_resource_ffuart),
+};
+
+static struct resource pxa_resource_btuart[] = {
+ {
+ .start = __PREG(BTUART),
+ .end = __PREG(BTUART) + 35,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_BTUART,
+ .end = IRQ_BTUART,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device pxa_device_btuart = {
+ .name = "pxa2xx-uart",
+ .id = 1,
+ .resource = pxa_resource_btuart,
+ .num_resources = ARRAY_SIZE(pxa_resource_btuart),
+};
+
+static struct resource pxa_resource_stuart[] = {
+ {
+ .start = __PREG(STUART),
+ .end = __PREG(STUART) + 35,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_STUART,
+ .end = IRQ_STUART,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device pxa_device_stuart = {
+ .name = "pxa2xx-uart",
+ .id = 2,
+ .resource = pxa_resource_stuart,
+ .num_resources = ARRAY_SIZE(pxa_resource_stuart),
+};
+
+static struct resource pxa_resource_hwuart[] = {
+ {
+ .start = __PREG(HWUART),
+ .end = __PREG(HWUART) + 47,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_HWUART,
+ .end = IRQ_HWUART,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device pxa_device_hwuart = {
+ .name = "pxa2xx-uart",
+ .id = 3,
+ .resource = pxa_resource_hwuart,
+ .num_resources = ARRAY_SIZE(pxa_resource_hwuart),
+};
+
+static struct resource pxai2c_resources[] = {
+ {
+ .start = 0x40301680,
+ .end = 0x403016a3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_I2C,
+ .end = IRQ_I2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa_device_i2c = {
+ .name = "pxa2xx-i2c",
+ .id = 0,
+ .resource = pxai2c_resources,
+ .num_resources = ARRAY_SIZE(pxai2c_resources),
+};
+
+void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
+{
+ pxa_register_device(&pxa_device_i2c, info);
+}
+
+static struct resource pxai2s_resources[] = {
+ {
+ .start = 0x40400000,
+ .end = 0x40400083,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_I2S,
+ .end = IRQ_I2S,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa_device_i2s = {
+ .name = "pxa2xx-i2s",
+ .id = -1,
+ .resource = pxai2s_resources,
+ .num_resources = ARRAY_SIZE(pxai2s_resources),
+};
+
+static u64 pxaficp_dmamask = ~(u32)0;
+
+struct platform_device pxa_device_ficp = {
+ .name = "pxa2xx-ir",
+ .id = -1,
+ .dev = {
+ .dma_mask = &pxaficp_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
+{
+ pxa_register_device(&pxa_device_ficp, info);
+}
+
+struct platform_device pxa_device_rtc = {
+ .name = "sa1100-rtc",
+ .id = -1,
+};
+
+#ifdef CONFIG_PXA25x
+
+static u64 pxa25x_ssp_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa25x_resource_ssp[] = {
+ [0] = {
+ .start = 0x41000000,
+ .end = 0x4100001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SSP,
+ .end = IRQ_SSP,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* DRCMR for RX */
+ .start = 13,
+ .end = 13,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ /* DRCMR for TX */
+ .start = 14,
+ .end = 14,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device pxa25x_device_ssp = {
+ .name = "pxa25x-ssp",
+ .id = 0,
+ .dev = {
+ .dma_mask = &pxa25x_ssp_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa25x_resource_ssp,
+ .num_resources = ARRAY_SIZE(pxa25x_resource_ssp),
+};
+
+static u64 pxa25x_nssp_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa25x_resource_nssp[] = {
+ [0] = {
+ .start = 0x41400000,
+ .end = 0x4140002f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_NSSP,
+ .end = IRQ_NSSP,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* DRCMR for RX */
+ .start = 15,
+ .end = 15,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ /* DRCMR for TX */
+ .start = 16,
+ .end = 16,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device pxa25x_device_nssp = {
+ .name = "pxa25x-nssp",
+ .id = 1,
+ .dev = {
+ .dma_mask = &pxa25x_nssp_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa25x_resource_nssp,
+ .num_resources = ARRAY_SIZE(pxa25x_resource_nssp),
+};
+
+static u64 pxa25x_assp_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa25x_resource_assp[] = {
+ [0] = {
+ .start = 0x41500000,
+ .end = 0x4150002f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_ASSP,
+ .end = IRQ_ASSP,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* DRCMR for RX */
+ .start = 23,
+ .end = 23,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ /* DRCMR for TX */
+ .start = 24,
+ .end = 24,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device pxa25x_device_assp = {
+ /* ASSP is basically equivalent to NSSP */
+ .name = "pxa25x-nssp",
+ .id = 2,
+ .dev = {
+ .dma_mask = &pxa25x_assp_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa25x_resource_assp,
+ .num_resources = ARRAY_SIZE(pxa25x_resource_assp),
+};
+#endif /* CONFIG_PXA25x */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+
+static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa27x_resource_ohci[] = {
+ [0] = {
+ .start = 0x4C000000,
+ .end = 0x4C00ff6f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBH1,
+ .end = IRQ_USBH1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa27x_device_ohci = {
+ .name = "pxa27x-ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &pxa27x_ohci_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(pxa27x_resource_ohci),
+ .resource = pxa27x_resource_ohci,
+};
+
+void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
+{
+ pxa_register_device(&pxa27x_device_ohci, info);
+}
+
+static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa27x_resource_ssp1[] = {
+ [0] = {
+ .start = 0x41000000,
+ .end = 0x4100003f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SSP,
+ .end = IRQ_SSP,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* DRCMR for RX */
+ .start = 13,
+ .end = 13,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ /* DRCMR for TX */
+ .start = 14,
+ .end = 14,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device pxa27x_device_ssp1 = {
+ .name = "pxa27x-ssp",
+ .id = 0,
+ .dev = {
+ .dma_mask = &pxa27x_ssp1_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa27x_resource_ssp1,
+ .num_resources = ARRAY_SIZE(pxa27x_resource_ssp1),
+};
+
+static u64 pxa27x_ssp2_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa27x_resource_ssp2[] = {
+ [0] = {
+ .start = 0x41700000,
+ .end = 0x4170003f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SSP2,
+ .end = IRQ_SSP2,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* DRCMR for RX */
+ .start = 15,
+ .end = 15,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ /* DRCMR for TX */
+ .start = 16,
+ .end = 16,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device pxa27x_device_ssp2 = {
+ .name = "pxa27x-ssp",
+ .id = 1,
+ .dev = {
+ .dma_mask = &pxa27x_ssp2_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa27x_resource_ssp2,
+ .num_resources = ARRAY_SIZE(pxa27x_resource_ssp2),
+};
+
+static u64 pxa27x_ssp3_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa27x_resource_ssp3[] = {
+ [0] = {
+ .start = 0x41900000,
+ .end = 0x4190003f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SSP3,
+ .end = IRQ_SSP3,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* DRCMR for RX */
+ .start = 66,
+ .end = 66,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ /* DRCMR for TX */
+ .start = 67,
+ .end = 67,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device pxa27x_device_ssp3 = {
+ .name = "pxa27x-ssp",
+ .id = 2,
+ .dev = {
+ .dma_mask = &pxa27x_ssp3_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa27x_resource_ssp3,
+ .num_resources = ARRAY_SIZE(pxa27x_resource_ssp3),
+};
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+
+#ifdef CONFIG_PXA3xx
+static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa3xx_resource_ssp4[] = {
+ [0] = {
+ .start = 0x41a00000,
+ .end = 0x41a0003f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SSP4,
+ .end = IRQ_SSP4,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* DRCMR for RX */
+ .start = 2,
+ .end = 2,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ /* DRCMR for TX */
+ .start = 3,
+ .end = 3,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device pxa3xx_device_ssp4 = {
+ /* PXA3xx SSP is basically equivalent to PXA27x */
+ .name = "pxa27x-ssp",
+ .id = 3,
+ .dev = {
+ .dma_mask = &pxa3xx_ssp4_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa3xx_resource_ssp4,
+ .num_resources = ARRAY_SIZE(pxa3xx_resource_ssp4),
+};
+
+static struct resource pxa3xx_resources_mci2[] = {
+ [0] = {
+ .start = 0x42000000,
+ .end = 0x42000fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_MMC2,
+ .end = IRQ_MMC2,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = 93,
+ .end = 93,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = 94,
+ .end = 94,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device pxa3xx_device_mci2 = {
+ .name = "pxa2xx-mci",
+ .id = 1,
+ .dev = {
+ .dma_mask = &pxamci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxa3xx_resources_mci2),
+ .resource = pxa3xx_resources_mci2,
+};
+
+void __init pxa3xx_set_mci2_info(struct pxamci_platform_data *info)
+{
+ pxa_register_device(&pxa3xx_device_mci2, info);
+}
+
+static struct resource pxa3xx_resources_mci3[] = {
+ [0] = {
+ .start = 0x42500000,
+ .end = 0x42500fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_MMC3,
+ .end = IRQ_MMC3,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = 100,
+ .end = 100,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = 101,
+ .end = 101,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device pxa3xx_device_mci3 = {
+ .name = "pxa2xx-mci",
+ .id = 2,
+ .dev = {
+ .dma_mask = &pxamci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxa3xx_resources_mci3),
+ .resource = pxa3xx_resources_mci3,
+};
+
+void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
+{
+ pxa_register_device(&pxa3xx_device_mci3, info);
+}
+
+#endif /* CONFIG_PXA3xx */
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 94c8d5cdd60a..96c7c8909068 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -1,4 +1,6 @@
extern struct platform_device pxa_device_mci;
+extern struct platform_device pxa3xx_device_mci2;
+extern struct platform_device pxa3xx_device_mci3;
extern struct platform_device pxa_device_udc;
extern struct platform_device pxa_device_fb;
extern struct platform_device pxa_device_ffuart;
@@ -12,3 +14,13 @@ extern struct platform_device pxa_device_rtc;
extern struct platform_device pxa27x_device_i2c_power;
extern struct platform_device pxa27x_device_ohci;
+
+extern struct platform_device pxa25x_device_ssp;
+extern struct platform_device pxa25x_device_nssp;
+extern struct platform_device pxa25x_device_assp;
+extern struct platform_device pxa27x_device_ssp1;
+extern struct platform_device pxa27x_device_ssp2;
+extern struct platform_device pxa27x_device_ssp3;
+extern struct platform_device pxa3xx_device_ssp4;
+
+void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
new file mode 100644
index 000000000000..ee0ae93c876a
--- /dev/null
+++ b/arch/arm/mach-pxa/eseries.c
@@ -0,0 +1,101 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/hardware.h>
+#include <asm/mach-types.h>
+
+#include <generic.h>
+
+/* Only e800 has 128MB RAM */
+static void __init eseries_fixup(struct machine_desc *desc,
+ struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+ mi->nr_banks=1;
+ mi->bank[0].start = 0xa0000000;
+ mi->bank[0].node = 0;
+ if (machine_is_e800())
+ mi->bank[0].size = (128*1024*1024);
+ else
+ mi->bank[0].size = (64*1024*1024);
+}
+
+/* e-series machine definitions */
+
+#ifdef CONFIG_MACH_E330
+MACHINE_START(E330, "Toshiba e330")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E740
+MACHINE_START(E740, "Toshiba e740")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E750
+MACHINE_START(E750, "Toshiba e750")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E400
+MACHINE_START(E400, "Toshiba e400")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E800
+MACHINE_START(E800, "Toshiba e800")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 1c34946ee16e..80721c610d41 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -20,10 +20,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
-#include <linux/platform_device.h>
#include <linux/ioport.h>
#include <linux/pm.h>
#include <linux/string.h>
+#include <linux/sysdev.h>
#include <asm/hardware.h>
#include <asm/irq.h>
@@ -32,14 +32,7 @@
#include <asm/mach/map.h>
#include <asm/arch/pxa-regs.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/i2c.h>
-#include "devices.h"
#include "generic.h"
/*
@@ -73,97 +66,6 @@ unsigned int get_memclk_frequency_10khz(void)
EXPORT_SYMBOL(get_memclk_frequency_10khz);
/*
- * Handy function to set GPIO alternate functions
- */
-int pxa_last_gpio;
-
-int pxa_gpio_mode(int gpio_mode)
-{
- unsigned long flags;
- int gpio = gpio_mode & GPIO_MD_MASK_NR;
- int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
- int gafr;
-
- if (gpio > pxa_last_gpio)
- return -EINVAL;
-
- local_irq_save(flags);
- if (gpio_mode & GPIO_DFLT_LOW)
- GPCR(gpio) = GPIO_bit(gpio);
- else if (gpio_mode & GPIO_DFLT_HIGH)
- GPSR(gpio) = GPIO_bit(gpio);
- if (gpio_mode & GPIO_MD_MASK_DIR)
- GPDR(gpio) |= GPIO_bit(gpio);
- else
- GPDR(gpio) &= ~GPIO_bit(gpio);
- gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
- GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2));
- local_irq_restore(flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(pxa_gpio_mode);
-
-int gpio_direction_input(unsigned gpio)
-{
- unsigned long flags;
- u32 mask;
-
- if (gpio > pxa_last_gpio)
- return -EINVAL;
-
- mask = GPIO_bit(gpio);
- local_irq_save(flags);
- GPDR(gpio) &= ~mask;
- local_irq_restore(flags);
-
- return 0;
-}
-EXPORT_SYMBOL(gpio_direction_input);
-
-int gpio_direction_output(unsigned gpio, int value)
-{
- unsigned long flags;
- u32 mask;
-
- if (gpio > pxa_last_gpio)
- return -EINVAL;
-
- mask = GPIO_bit(gpio);
- local_irq_save(flags);
- if (value)
- GPSR(gpio) = mask;
- else
- GPCR(gpio) = mask;
- GPDR(gpio) |= mask;
- local_irq_restore(flags);
-
- return 0;
-}
-EXPORT_SYMBOL(gpio_direction_output);
-
-/*
- * Return GPIO level
- */
-int pxa_gpio_get_value(unsigned gpio)
-{
- return __gpio_get_value(gpio);
-}
-
-EXPORT_SYMBOL(pxa_gpio_get_value);
-
-/*
- * Set output GPIO level
- */
-void pxa_gpio_set_value(unsigned gpio, int value)
-{
- __gpio_set_value(gpio, value);
-}
-
-EXPORT_SYMBOL(pxa_gpio_set_value);
-
-/*
* Routine to safely enable or disable a clock in the CKEN
*/
void __pxa_set_cken(int clock, int enable)
@@ -178,7 +80,6 @@ void __pxa_set_cken(int clock, int enable)
local_irq_restore(flags);
}
-
EXPORT_SYMBOL(__pxa_set_cken);
/*
@@ -203,7 +104,7 @@ static struct map_desc standard_io_desc[] __initdata = {
}, { /* Mem Ctl */
.virtual = 0xf6000000,
.pfn = __phys_to_pfn(0x48000000),
- .length = 0x00100000,
+ .length = 0x00200000,
.type = MT_DEVICE
}, { /* USB host */
.virtual = 0xf8000000,
@@ -234,244 +135,58 @@ void __init pxa_map_io(void)
get_clk_frequency_khz(1);
}
+#ifdef CONFIG_PM
-static struct resource pxamci_resources[] = {
- [0] = {
- .start = 0x41100000,
- .end = 0x41100fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_MMC,
- .end = IRQ_MMC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 pxamci_dmamask = 0xffffffffUL;
-
-struct platform_device pxa_device_mci = {
- .name = "pxa2xx-mci",
- .id = -1,
- .dev = {
- .dma_mask = &pxamci_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(pxamci_resources),
- .resource = pxamci_resources,
-};
-
-void __init pxa_set_mci_info(struct pxamci_platform_data *info)
-{
- pxa_device_mci.dev.platform_data = info;
-}
-
-
-static struct pxa2xx_udc_mach_info pxa_udc_info;
+static unsigned long saved_gplr[4];
+static unsigned long saved_gpdr[4];
+static unsigned long saved_grer[4];
+static unsigned long saved_gfer[4];
-void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
+static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state)
{
- memcpy(&pxa_udc_info, info, sizeof *info);
-}
-
-static struct resource pxa2xx_udc_resources[] = {
- [0] = {
- .start = 0x40600000,
- .end = 0x4060ffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USB,
- .end = IRQ_USB,
- .flags = IORESOURCE_IRQ,
- },
-};
+ int i, gpio;
-static u64 udc_dma_mask = ~(u32)0;
+ for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) {
+ saved_gplr[i] = GPLR(gpio);
+ saved_gpdr[i] = GPDR(gpio);
+ saved_grer[i] = GRER(gpio);
+ saved_gfer[i] = GFER(gpio);
-struct platform_device pxa_device_udc = {
- .name = "pxa2xx-udc",
- .id = -1,
- .resource = pxa2xx_udc_resources,
- .num_resources = ARRAY_SIZE(pxa2xx_udc_resources),
- .dev = {
- .platform_data = &pxa_udc_info,
- .dma_mask = &udc_dma_mask,
+ /* Clear GPIO transition detect bits */
+ GEDR(gpio) = GEDR(gpio);
}
-};
-
-static struct resource pxafb_resources[] = {
- [0] = {
- .start = 0x44000000,
- .end = 0x4400ffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_LCD,
- .end = IRQ_LCD,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 fb_dma_mask = ~(u64)0;
-
-struct platform_device pxa_device_fb = {
- .name = "pxa2xx-fb",
- .id = -1,
- .dev = {
- .dma_mask = &fb_dma_mask,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(pxafb_resources),
- .resource = pxafb_resources,
-};
-
-void __init set_pxa_fb_info(struct pxafb_mach_info *info)
-{
- pxa_device_fb.dev.platform_data = info;
+ return 0;
}
-void __init set_pxa_fb_parent(struct device *parent_dev)
+static int pxa_gpio_resume(struct sys_device *dev)
{
- pxa_device_fb.dev.parent = parent_dev;
-}
-
-static struct resource pxa_resource_ffuart[] = {
- {
- .start = __PREG(FFUART),
- .end = __PREG(FFUART) + 35,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_FFUART,
- .end = IRQ_FFUART,
- .flags = IORESOURCE_IRQ,
- }
-};
+ int i, gpio;
-struct platform_device pxa_device_ffuart= {
- .name = "pxa2xx-uart",
- .id = 0,
- .resource = pxa_resource_ffuart,
- .num_resources = ARRAY_SIZE(pxa_resource_ffuart),
-};
+ for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) {
+ /* restore level with set/clear */
+ GPSR(gpio) = saved_gplr[i];
+ GPCR(gpio) = ~saved_gplr[i];
-static struct resource pxa_resource_btuart[] = {
- {
- .start = __PREG(BTUART),
- .end = __PREG(BTUART) + 35,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_BTUART,
- .end = IRQ_BTUART,
- .flags = IORESOURCE_IRQ,
+ GRER(gpio) = saved_grer[i];
+ GFER(gpio) = saved_gfer[i];
+ GPDR(gpio) = saved_gpdr[i];
}
-};
-
-struct platform_device pxa_device_btuart = {
- .name = "pxa2xx-uart",
- .id = 1,
- .resource = pxa_resource_btuart,
- .num_resources = ARRAY_SIZE(pxa_resource_btuart),
-};
-
-static struct resource pxa_resource_stuart[] = {
- {
- .start = __PREG(STUART),
- .end = __PREG(STUART) + 35,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_STUART,
- .end = IRQ_STUART,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device pxa_device_stuart = {
- .name = "pxa2xx-uart",
- .id = 2,
- .resource = pxa_resource_stuart,
- .num_resources = ARRAY_SIZE(pxa_resource_stuart),
-};
-
-static struct resource pxa_resource_hwuart[] = {
- {
- .start = __PREG(HWUART),
- .end = __PREG(HWUART) + 47,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_HWUART,
- .end = IRQ_HWUART,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device pxa_device_hwuart = {
- .name = "pxa2xx-uart",
- .id = 3,
- .resource = pxa_resource_hwuart,
- .num_resources = ARRAY_SIZE(pxa_resource_hwuart),
-};
-
-static struct resource pxai2c_resources[] = {
- {
- .start = 0x40301680,
- .end = 0x403016a3,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_I2C,
- .end = IRQ_I2C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device pxa_device_i2c = {
- .name = "pxa2xx-i2c",
- .id = 0,
- .resource = pxai2c_resources,
- .num_resources = ARRAY_SIZE(pxai2c_resources),
-};
-
-void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
-{
- pxa_device_i2c.dev.platform_data = info;
+ return 0;
}
+#else
+#define pxa_gpio_suspend NULL
+#define pxa_gpio_resume NULL
+#endif
-static struct resource pxai2s_resources[] = {
- {
- .start = 0x40400000,
- .end = 0x40400083,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_I2S,
- .end = IRQ_I2S,
- .flags = IORESOURCE_IRQ,
- },
+struct sysdev_class pxa_gpio_sysclass = {
+ .name = "gpio",
+ .suspend = pxa_gpio_suspend,
+ .resume = pxa_gpio_resume,
};
-struct platform_device pxa_device_i2s = {
- .name = "pxa2xx-i2s",
- .id = -1,
- .resource = pxai2s_resources,
- .num_resources = ARRAY_SIZE(pxai2s_resources),
-};
-
-static u64 pxaficp_dmamask = ~(u32)0;
-
-struct platform_device pxa_device_ficp = {
- .name = "pxa2xx-ir",
- .id = -1,
- .dev = {
- .dma_mask = &pxaficp_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
+static int __init pxa_gpio_init(void)
{
- pxa_device_ficp.dev.platform_data = info;
+ return sysdev_class_register(&pxa_gpio_sysclass);
}
-struct platform_device pxa_device_rtc = {
- .name = "sa1100-rtc",
- .id = -1,
-};
+core_initcall(pxa_gpio_init);
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index b30f240a16c7..b3d10b0e52a0 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -16,6 +16,7 @@ extern void __init pxa_init_irq_low(void);
extern void __init pxa_init_irq_high(void);
extern void __init pxa_init_irq_gpio(int gpio_nr);
extern void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int));
+extern void __init pxa_init_gpio(int gpio_nr);
extern void __init pxa25x_init_irq(void);
extern void __init pxa27x_init_irq(void);
extern void __init pxa3xx_init_irq(void);
@@ -52,3 +53,6 @@ extern unsigned pxa3xx_get_memclk_frequency_10khz(void);
#define pxa3xx_get_clk_frequency_khz(x) (0)
#define pxa3xx_get_memclk_frequency_10khz() (0)
#endif
+
+extern struct sysdev_class pxa_irq_sysclass;
+extern struct sysdev_class pxa_gpio_sysclass;
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
new file mode 100644
index 000000000000..8638dd7dd076
--- /dev/null
+++ b/arch/arm/mach-pxa/gpio.c
@@ -0,0 +1,197 @@
+/*
+ * linux/arch/arm/mach-pxa/gpio.c
+ *
+ * Generic PXA GPIO handling
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/gpio.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/arch/pxa-regs.h>
+
+#include "generic.h"
+
+
+struct pxa_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *regbase;
+};
+
+int pxa_last_gpio;
+
+/*
+ * Configure pins for GPIO or other functions
+ */
+int pxa_gpio_mode(int gpio_mode)
+{
+ unsigned long flags;
+ int gpio = gpio_mode & GPIO_MD_MASK_NR;
+ int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
+ int gafr;
+
+ if (gpio > pxa_last_gpio)
+ return -EINVAL;
+
+ local_irq_save(flags);
+ if (gpio_mode & GPIO_DFLT_LOW)
+ GPCR(gpio) = GPIO_bit(gpio);
+ else if (gpio_mode & GPIO_DFLT_HIGH)
+ GPSR(gpio) = GPIO_bit(gpio);
+ if (gpio_mode & GPIO_MD_MASK_DIR)
+ GPDR(gpio) |= GPIO_bit(gpio);
+ else
+ GPDR(gpio) &= ~GPIO_bit(gpio);
+ gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
+ GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2));
+ local_irq_restore(flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(pxa_gpio_mode);
+
+static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ unsigned long flags;
+ u32 mask = 1 << offset;
+ u32 value;
+ struct pxa_gpio_chip *pxa;
+ void __iomem *gpdr;
+
+ pxa = container_of(chip, struct pxa_gpio_chip, chip);
+ gpdr = pxa->regbase + GPDR_OFFSET;
+ local_irq_save(flags);
+ value = __raw_readl(gpdr);
+ value &= ~mask;
+ __raw_writel(value, gpdr);
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static int pxa_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ unsigned long flags;
+ u32 mask = 1 << offset;
+ u32 tmp;
+ struct pxa_gpio_chip *pxa;
+ void __iomem *gpdr;
+
+ pxa = container_of(chip, struct pxa_gpio_chip, chip);
+ __raw_writel(mask,
+ pxa->regbase + (value ? GPSR_OFFSET : GPCR_OFFSET));
+ gpdr = pxa->regbase + GPDR_OFFSET;
+ local_irq_save(flags);
+ tmp = __raw_readl(gpdr);
+ tmp |= mask;
+ __raw_writel(tmp, gpdr);
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+/*
+ * Return GPIO level
+ */
+static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ u32 mask = 1 << offset;
+ struct pxa_gpio_chip *pxa;
+
+ pxa = container_of(chip, struct pxa_gpio_chip, chip);
+ return __raw_readl(pxa->regbase + GPLR_OFFSET) & mask;
+}
+
+/*
+ * Set output GPIO level
+ */
+static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ u32 mask = 1 << offset;
+ struct pxa_gpio_chip *pxa;
+
+ pxa = container_of(chip, struct pxa_gpio_chip, chip);
+
+ if (value)
+ __raw_writel(mask, pxa->regbase + GPSR_OFFSET);
+ else
+ __raw_writel(mask, pxa->regbase + GPCR_OFFSET);
+}
+
+static struct pxa_gpio_chip pxa_gpio_chip[] = {
+ [0] = {
+ .regbase = GPIO0_BASE,
+ .chip = {
+ .label = "gpio-0",
+ .direction_input = pxa_gpio_direction_input,
+ .direction_output = pxa_gpio_direction_output,
+ .get = pxa_gpio_get,
+ .set = pxa_gpio_set,
+ .base = 0,
+ .ngpio = 32,
+ },
+ },
+ [1] = {
+ .regbase = GPIO1_BASE,
+ .chip = {
+ .label = "gpio-1",
+ .direction_input = pxa_gpio_direction_input,
+ .direction_output = pxa_gpio_direction_output,
+ .get = pxa_gpio_get,
+ .set = pxa_gpio_set,
+ .base = 32,
+ .ngpio = 32,
+ },
+ },
+ [2] = {
+ .regbase = GPIO2_BASE,
+ .chip = {
+ .label = "gpio-2",
+ .direction_input = pxa_gpio_direction_input,
+ .direction_output = pxa_gpio_direction_output,
+ .get = pxa_gpio_get,
+ .set = pxa_gpio_set,
+ .base = 64,
+ .ngpio = 32, /* 21 for PXA25x */
+ },
+ },
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+ [3] = {
+ .regbase = GPIO3_BASE,
+ .chip = {
+ .label = "gpio-3",
+ .direction_input = pxa_gpio_direction_input,
+ .direction_output = pxa_gpio_direction_output,
+ .get = pxa_gpio_get,
+ .set = pxa_gpio_set,
+ .base = 96,
+ .ngpio = 32,
+ },
+ },
+#endif
+};
+
+void __init pxa_init_gpio(int gpio_nr)
+{
+ int i;
+
+ /* add a GPIO chip for each register bank.
+ * the last PXA25x register only contains 21 GPIOs
+ */
+ for (i = 0; i < gpio_nr; i += 32) {
+ if (i+32 > gpio_nr)
+ pxa_gpio_chip[i/32].chip.ngpio = gpio_nr - i;
+ gpiochip_add(&pxa_gpio_chip[i/32].chip);
+ }
+}
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 465108da2851..0a9434432c55 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -54,7 +54,7 @@ static struct resource smc91x_resources[] = {
[1] = {
.start = IRQ_GPIO(4),
.end = IRQ_GPIO(4),
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 07acb45b16ea..36c6a68beca2 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
+#include <linux/sysdev.h>
#include <asm/hardware.h>
#include <asm/irq.h>
@@ -310,6 +311,8 @@ void __init pxa_init_irq_gpio(int gpio_nr)
/* Install handler for GPIO>=2 edge detect interrupts */
set_irq_chip(IRQ_GPIO_2_x, &pxa_internal_chip_low);
set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler);
+
+ pxa_init_gpio(gpio_nr);
}
void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int))
@@ -321,3 +324,64 @@ void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int))
pxa_low_gpio_chip.set_wake = set_wake;
pxa_muxed_gpio_chip.set_wake = set_wake;
}
+
+#ifdef CONFIG_PM
+static unsigned long saved_icmr[2];
+
+static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
+{
+ switch (dev->id) {
+ case 0:
+ saved_icmr[0] = ICMR;
+ ICMR = 0;
+ break;
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+ case 1:
+ saved_icmr[1] = ICMR2;
+ ICMR2 = 0;
+ break;
+#endif
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int pxa_irq_resume(struct sys_device *dev)
+{
+ switch (dev->id) {
+ case 0:
+ ICMR = saved_icmr[0];
+ ICLR = 0;
+ ICCR = 1;
+ break;
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+ case 1:
+ ICMR2 = saved_icmr[1];
+ ICLR2 = 0;
+ break;
+#endif
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+#else
+#define pxa_irq_suspend NULL
+#define pxa_irq_resume NULL
+#endif
+
+struct sysdev_class pxa_irq_sysclass = {
+ .name = "irq",
+ .suspend = pxa_irq_suspend,
+ .resume = pxa_irq_resume,
+};
+
+static int __init pxa_irq_init(void)
+{
+ return sysdev_class_register(&pxa_irq_sysclass);
+}
+
+core_initcall(pxa_irq_init);
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
new file mode 100644
index 000000000000..0a4b54c21314
--- /dev/null
+++ b/arch/arm/mach-pxa/littleton.c
@@ -0,0 +1,325 @@
+/*
+ * linux/arch/arm/mach-pxa/littleton.c
+ *
+ * Support for the Marvell Littleton Development Platform.
+ *
+ * Author: Jason Chagas (largely modified code)
+ * Created: Nov 20, 2006
+ * Copyright: (C) Copyright 2006 Marvell International Ltd.
+ *
+ * 2007-11-22 modified to align with latest kernel
+ * eric miao <eric.miao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/mfp-pxa300.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/ssp.h>
+#include <asm/arch/littleton.h>
+
+#include "generic.h"
+
+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+
+/* Littleton MFP configurations */
+static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
+ /* LCD */
+ GPIO54_LCD_LDD_0,
+ GPIO55_LCD_LDD_1,
+ GPIO56_LCD_LDD_2,
+ GPIO57_LCD_LDD_3,
+ GPIO58_LCD_LDD_4,
+ GPIO59_LCD_LDD_5,
+ GPIO60_LCD_LDD_6,
+ GPIO61_LCD_LDD_7,
+ GPIO62_LCD_LDD_8,
+ GPIO63_LCD_LDD_9,
+ GPIO64_LCD_LDD_10,
+ GPIO65_LCD_LDD_11,
+ GPIO66_LCD_LDD_12,
+ GPIO67_LCD_LDD_13,
+ GPIO68_LCD_LDD_14,
+ GPIO69_LCD_LDD_15,
+ GPIO70_LCD_LDD_16,
+ GPIO71_LCD_LDD_17,
+ GPIO72_LCD_FCLK,
+ GPIO73_LCD_LCLK,
+ GPIO74_LCD_PCLK,
+ GPIO75_LCD_BIAS,
+
+ /* SSP2 */
+ GPIO25_SSP2_SCLK,
+ GPIO17_SSP2_FRM,
+ GPIO27_SSP2_TXD,
+
+ /* Debug Ethernet */
+ GPIO90_GPIO,
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = (LITTLETON_ETH_PHYS + 0x300),
+ .end = (LITTLETON_ETH_PHYS + 0xfffff),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
+ .end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+ }
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULES)
+/* use bit 30, 31 as the indicator of command parameter number */
+#define CMD0(x) ((0x00000000) | ((x) << 9))
+#define CMD1(x, x1) ((0x40000000) | ((x) << 9) | 0x100 | (x1))
+#define CMD2(x, x1, x2) ((0x80000000) | ((x) << 18) | 0x20000 |\
+ ((x1) << 9) | 0x100 | (x2))
+
+static uint32_t lcd_panel_reset[] = {
+ CMD0(0x1), /* reset */
+ CMD0(0x0), /* nop */
+ CMD0(0x0), /* nop */
+ CMD0(0x0), /* nop */
+};
+
+static uint32_t lcd_panel_on[] = {
+ CMD0(0x29), /* Display ON */
+ CMD2(0xB8, 0xFF, 0xF9), /* Output Control */
+ CMD0(0x11), /* Sleep out */
+ CMD1(0xB0, 0x16), /* Wake */
+};
+
+static uint32_t lcd_panel_off[] = {
+ CMD0(0x28), /* Display OFF */
+ CMD2(0xB8, 0x80, 0x02), /* Output Control */
+ CMD0(0x10), /* Sleep in */
+ CMD1(0xB0, 0x00), /* Deep stand by in */
+};
+
+static uint32_t lcd_vga_pass_through[] = {
+ CMD1(0xB0, 0x16),
+ CMD1(0xBC, 0x80),
+ CMD1(0xE1, 0x00),
+ CMD1(0x36, 0x50),
+ CMD1(0x3B, 0x00),
+};
+
+static uint32_t lcd_qvga_pass_through[] = {
+ CMD1(0xB0, 0x16),
+ CMD1(0xBC, 0x81),
+ CMD1(0xE1, 0x00),
+ CMD1(0x36, 0x50),
+ CMD1(0x3B, 0x22),
+};
+
+static uint32_t lcd_vga_transfer[] = {
+ CMD1(0xcf, 0x02), /* Blanking period control (1) */
+ CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */
+ CMD1(0xd1, 0x01), /* CKV timing control on/off */
+ CMD2(0xd2, 0x14, 0x00), /* CKV 1,2 timing control */
+ CMD2(0xd3, 0x1a, 0x0f), /* OEV timing control */
+ CMD2(0xd4, 0x1f, 0xaf), /* ASW timing control (1) */
+ CMD1(0xd5, 0x14), /* ASW timing control (2) */
+ CMD0(0x21), /* Invert for normally black display */
+ CMD0(0x29), /* Display on */
+};
+
+static uint32_t lcd_qvga_transfer[] = {
+ CMD1(0xd6, 0x02), /* Blanking period control (1) */
+ CMD2(0xd7, 0x08, 0x04), /* Blanking period control (2) */
+ CMD1(0xd8, 0x01), /* CKV timing control on/off */
+ CMD2(0xd9, 0x00, 0x08), /* CKV 1,2 timing control */
+ CMD2(0xde, 0x05, 0x0a), /* OEV timing control */
+ CMD2(0xdf, 0x0a, 0x19), /* ASW timing control (1) */
+ CMD1(0xe0, 0x0a), /* ASW timing control (2) */
+ CMD0(0x21), /* Invert for normally black display */
+ CMD0(0x29), /* Display on */
+};
+
+static uint32_t lcd_panel_config[] = {
+ CMD2(0xb8, 0xff, 0xf9), /* Output control */
+ CMD0(0x11), /* sleep out */
+ CMD1(0xba, 0x01), /* Display mode (1) */
+ CMD1(0xbb, 0x00), /* Display mode (2) */
+ CMD1(0x3a, 0x60), /* Display mode 18-bit RGB */
+ CMD1(0xbf, 0x10), /* Drive system change control */
+ CMD1(0xb1, 0x56), /* Booster operation setup */
+ CMD1(0xb2, 0x33), /* Booster mode setup */
+ CMD1(0xb3, 0x11), /* Booster frequency setup */
+ CMD1(0xb4, 0x02), /* Op amp/system clock */
+ CMD1(0xb5, 0x35), /* VCS voltage */
+ CMD1(0xb6, 0x40), /* VCOM voltage */
+ CMD1(0xb7, 0x03), /* External display signal */
+ CMD1(0xbd, 0x00), /* ASW slew rate */
+ CMD1(0xbe, 0x00), /* Dummy data for QuadData operation */
+ CMD1(0xc0, 0x11), /* Sleep out FR count (A) */
+ CMD1(0xc1, 0x11), /* Sleep out FR count (B) */
+ CMD1(0xc2, 0x11), /* Sleep out FR count (C) */
+ CMD2(0xc3, 0x20, 0x40), /* Sleep out FR count (D) */
+ CMD2(0xc4, 0x60, 0xc0), /* Sleep out FR count (E) */
+ CMD2(0xc5, 0x10, 0x20), /* Sleep out FR count (F) */
+ CMD1(0xc6, 0xc0), /* Sleep out FR count (G) */
+ CMD2(0xc7, 0x33, 0x43), /* Gamma 1 fine tuning (1) */
+ CMD1(0xc8, 0x44), /* Gamma 1 fine tuning (2) */
+ CMD1(0xc9, 0x33), /* Gamma 1 inclination adjustment */
+ CMD1(0xca, 0x00), /* Gamma 1 blue offset adjustment */
+ CMD2(0xec, 0x01, 0xf0), /* Horizontal clock cycles */
+};
+
+static void ssp_reconfig(struct ssp_dev *dev, int nparam)
+{
+ static int last_nparam = -1;
+
+ /* check if it is necessary to re-config SSP */
+ if (nparam == last_nparam)
+ return;
+
+ ssp_disable(dev);
+ ssp_config(dev, (nparam == 2) ? 0x0010058a : 0x00100581, 0x18, 0, 0);
+
+ last_nparam = nparam;
+}
+
+static void ssp_send_cmd(uint32_t *cmd, int num)
+{
+ static int ssp_initialized;
+ static struct ssp_dev ssp2;
+
+ int i;
+
+ if (!ssp_initialized) {
+ ssp_init(&ssp2, 2, SSP_NO_IRQ);
+ ssp_initialized = 1;
+ }
+
+ clk_enable(ssp2.ssp->clk);
+ for (i = 0; i < num; i++, cmd++) {
+ ssp_reconfig(&ssp2, (*cmd >> 30) & 0x3);
+ ssp_write_word(&ssp2, *cmd & 0x3fffffff);
+
+ /* FIXME: ssp_flush() is mandatory here to work */
+ ssp_flush(&ssp2);
+ }
+ clk_disable(ssp2.ssp->clk);
+}
+
+static void littleton_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+ if (on) {
+ ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_on));
+ ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_reset));
+ if (var->xres > 240) {
+ /* VGA */
+ ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_pass_through));
+ ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
+ ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_transfer));
+ } else {
+ /* QVGA */
+ ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_pass_through));
+ ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
+ ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_transfer));
+ }
+ } else
+ ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_off));
+}
+
+static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
+ [0] = {
+ /* VGA */
+ .pixclock = 38250,
+ .xres = 480,
+ .yres = 640,
+ .bpp = 16,
+ .hsync_len = 8,
+ .left_margin = 8,
+ .right_margin = 24,
+ .vsync_len = 2,
+ .upper_margin = 2,
+ .lower_margin = 4,
+ .sync = 0,
+ },
+ [1] = {
+ /* QVGA */
+ .pixclock = 153000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 8,
+ .left_margin = 8,
+ .right_margin = 88,
+ .vsync_len = 2,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info littleton_lcd_info = {
+ .modes = tpo_tdo24mtea1_modes,
+ .num_modes = 2,
+ .lccr0 = LCCR0_Act,
+ .lccr3 = LCCR3_HSP | LCCR3_VSP,
+ .pxafb_lcd_power = littleton_lcd_power,
+};
+
+static void littleton_init_lcd(void)
+{
+ set_pxa_fb_info(&littleton_lcd_info);
+}
+#else
+static inline void littleton_init_lcd(void) {};
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */
+
+static void __init littleton_init(void)
+{
+ /* initialize MFP configurations */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));
+
+ /*
+ * Note: we depend bootloader set the correct
+ * value to MSC register for SMC91x.
+ */
+ platform_device_register(&smc91x_device);
+
+ littleton_init_lcd();
+}
+
+MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0000100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = littleton_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 26116440a7c9..afa62ffe3ad5 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -38,6 +38,7 @@
#include <asm/mach/flash.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/lpd270.h>
#include <asm/arch/audio.h>
#include <asm/arch/pxafb.h>
@@ -122,7 +123,7 @@ static int lpd270_irq_resume(struct sys_device *dev)
}
static struct sysdev_class lpd270_irq_sysclass = {
- set_kset_name("cpld_irq"),
+ .name = "cpld_irq",
.resume = lpd270_irq_resume,
};
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 011a1a72b61c..e7ae4bb3e361 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -41,6 +41,7 @@
#include <asm/hardware/sa1111.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/lubbock.h>
#include <asm/arch/udc.h>
#include <asm/arch/irda.h>
@@ -126,7 +127,7 @@ static int lubbock_irq_resume(struct sys_device *dev)
}
static struct sysdev_class lubbock_irq_sysclass = {
- set_kset_name("cpld_irq"),
+ .name = "cpld_irq",
.resume = lubbock_irq_resume,
};
@@ -136,9 +137,13 @@ static struct sys_device lubbock_irq_device = {
static int __init lubbock_irq_device_init(void)
{
- int ret = sysdev_class_register(&lubbock_irq_sysclass);
- if (ret == 0)
- ret = sysdev_register(&lubbock_irq_device);
+ int ret = -ENODEV;
+
+ if (machine_is_lubbock()) {
+ ret = sysdev_class_register(&lubbock_irq_sysclass);
+ if (ret == 0)
+ ret = sysdev_register(&lubbock_irq_device);
+ }
return ret;
}
@@ -191,7 +196,7 @@ static struct resource smc91x_resources[] = {
[1] = {
.start = LUBBOCK_ETH_IRQ,
.end = LUBBOCK_ETH_IRQ,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
[2] = {
.name = "smc91x-attrib",
@@ -206,30 +211,13 @@ static struct resource smc91x_resources[] = {
* (to J5) and poking board registers (as done below). Else it's only useful
* for the temperature sensors.
*/
-static struct resource pxa_ssp_resources[] = {
- [0] = {
- .start = __PREG(SSCR0_P(1)),
- .end = __PREG(SSCR0_P(1)) + 0x14,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SSP,
- .end = IRQ_SSP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
static struct pxa2xx_spi_master pxa_ssp_master_info = {
- .ssp_type = PXA25x_SSP,
- .clock_enable = CKEN_SSP,
.num_chipselect = 0,
};
static struct platform_device pxa_ssp = {
.name = "pxa2xx-spi",
.id = 1,
- .resource = pxa_ssp_resources,
- .num_resources = ARRAY_SIZE(pxa_ssp_resources),
.dev = {
.platform_data = &pxa_ssp_master_info,
},
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
new file mode 100644
index 000000000000..d98ef7ada2f8
--- /dev/null
+++ b/arch/arm/mach-pxa/magician.c
@@ -0,0 +1,218 @@
+/*
+ * Support for HTC Magician PDA phones:
+ * i-mate JAM, O2 Xda mini, Orange SPV M500, Qtek s100, Qtek s110
+ * and T-Mobile MDA Compact.
+ *
+ * Copyright (c) 2006-2007 Philipp Zabel
+ *
+ * Based on hx4700.c, spitz.c and others.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/gpio.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/magician.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/ohci.h>
+
+#include "generic.h"
+
+/*
+ * IRDA
+ */
+
+static void magician_irda_transceiver_mode(struct device *dev, int mode)
+{
+ gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
+}
+
+static struct pxaficp_platform_data magician_ficp_info = {
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = magician_irda_transceiver_mode,
+};
+
+/*
+ * GPIO Keys
+ */
+
+static struct gpio_keys_button magician_button_table[] = {
+ {KEY_POWER, GPIO0_MAGICIAN_KEY_POWER, 0, "Power button"},
+ {KEY_ESC, GPIO37_MAGICIAN_KEY_HANGUP, 0, "Hangup button"},
+ {KEY_F10, GPIO38_MAGICIAN_KEY_CONTACTS, 0, "Contacts button"},
+ {KEY_CALENDAR, GPIO90_MAGICIAN_KEY_CALENDAR, 0, "Calendar button"},
+ {KEY_CAMERA, GPIO91_MAGICIAN_KEY_CAMERA, 0, "Camera button"},
+ {KEY_UP, GPIO93_MAGICIAN_KEY_UP, 0, "Up button"},
+ {KEY_DOWN, GPIO94_MAGICIAN_KEY_DOWN, 0, "Down button"},
+ {KEY_LEFT, GPIO95_MAGICIAN_KEY_LEFT, 0, "Left button"},
+ {KEY_RIGHT, GPIO96_MAGICIAN_KEY_RIGHT, 0, "Right button"},
+ {KEY_KPENTER, GPIO97_MAGICIAN_KEY_ENTER, 0, "Action button"},
+ {KEY_RECORD, GPIO98_MAGICIAN_KEY_RECORD, 0, "Record button"},
+ {KEY_VOLUMEUP, GPIO100_MAGICIAN_KEY_VOL_UP, 0, "Volume up"},
+ {KEY_VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, 0, "Volume down"},
+ {KEY_PHONE, GPIO102_MAGICIAN_KEY_PHONE, 0, "Phone button"},
+ {KEY_PLAY, GPIO99_MAGICIAN_HEADPHONE_IN, 0, "Headset button"},
+};
+
+static struct gpio_keys_platform_data gpio_keys_data = {
+ .buttons = magician_button_table,
+ .nbuttons = ARRAY_SIZE(magician_button_table),
+};
+
+static struct platform_device gpio_keys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &gpio_keys_data,
+ },
+ .id = -1,
+};
+
+/*
+ * LCD - Toppoly TD028STEB1
+ */
+
+static struct pxafb_mode_info toppoly_modes[] = {
+ {
+ .pixclock = 96153,
+ .bpp = 16,
+ .xres = 240,
+ .yres = 320,
+ .hsync_len = 11,
+ .vsync_len = 3,
+ .left_margin = 19,
+ .upper_margin = 2,
+ .right_margin = 10,
+ .lower_margin = 2,
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info toppoly_info = {
+ .modes = toppoly_modes,
+ .num_modes = 1,
+ .fixed_modes = 1,
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = LCCR3_PixRsEdg,
+};
+
+/*
+ * Backlight
+ */
+
+static void magician_set_bl_intensity(int intensity)
+{
+ if (intensity) {
+ PWM_CTRL0 = 1;
+ PWM_PERVAL0 = 0xc8;
+ PWM_PWDUTY0 = intensity;
+ pxa_set_cken(CKEN_PWM0, 1);
+ } else {
+ pxa_set_cken(CKEN_PWM0, 0);
+ }
+}
+
+static struct generic_bl_info backlight_info = {
+ .default_intensity = 0x64,
+ .limit_mask = 0x0b,
+ .max_intensity = 0xc7,
+ .set_bl_intensity = magician_set_bl_intensity,
+};
+
+static struct platform_device backlight = {
+ .name = "corgi-bl",
+ .dev = {
+ .platform_data = &backlight_info,
+ },
+ .id = -1,
+};
+
+
+/*
+ * USB OHCI
+ */
+
+static int magician_ohci_init(struct device *dev)
+{
+ UHCHR = (UHCHR | UHCHR_SSEP2 | UHCHR_PCPL | UHCHR_CGR) &
+ ~(UHCHR_SSEP1 | UHCHR_SSEP3 | UHCHR_SSE);
+
+ return 0;
+}
+
+static struct pxaohci_platform_data magician_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .init = magician_ohci_init,
+ .power_budget = 0,
+};
+
+
+/*
+ * StrataFlash
+ */
+
+#define PXA_CS_SIZE 0x04000000
+
+static struct resource strataflash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + PXA_CS_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data strataflash_data = {
+ .width = 4,
+};
+
+static struct platform_device strataflash = {
+ .name = "physmap-flash",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &strataflash_resource,
+ .dev = {
+ .platform_data = &strataflash_data,
+ },
+};
+
+/*
+ * Platform devices
+ */
+
+static struct platform_device *devices[] __initdata = {
+ &gpio_keys,
+ &backlight,
+ &strataflash,
+};
+
+static void __init magician_init(void)
+{
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ pxa_set_ohci_info(&magician_ohci_info);
+ pxa_set_ficp_info(&magician_ficp_info);
+ set_pxa_fb_info(&toppoly_info);
+}
+
+
+MACHINE_START(MAGICIAN, "HTC Magician")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .init_machine = magician_init,
+ .timer = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index a4bc3483cbb3..345c3deeb02e 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -23,6 +23,7 @@
#include <linux/ioport.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/backlight.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -38,6 +39,7 @@
#include <asm/mach/flash.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/mainstone.h>
#include <asm/arch/audio.h>
#include <asm/arch/pxafb.h>
@@ -120,7 +122,7 @@ static int mainstone_irq_resume(struct sys_device *dev)
}
static struct sysdev_class mainstone_irq_sysclass = {
- set_kset_name("cpld_irq"),
+ .name = "cpld_irq",
.resume = mainstone_irq_resume,
};
@@ -130,9 +132,13 @@ static struct sys_device mainstone_irq_device = {
static int __init mainstone_irq_device_init(void)
{
- int ret = sysdev_class_register(&mainstone_irq_sysclass);
- if (ret == 0)
- ret = sysdev_register(&mainstone_irq_device);
+ int ret = -ENODEV;
+
+ if (machine_is_mainstone()) {
+ ret = sysdev_class_register(&mainstone_irq_sysclass);
+ if (ret == 0)
+ ret = sysdev_register(&mainstone_irq_device);
+ }
return ret;
}
@@ -150,7 +156,7 @@ static struct resource smc91x_resources[] = {
[1] = {
.start = MAINSTONE_IRQ(3),
.end = MAINSTONE_IRQ(3),
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
@@ -263,21 +269,60 @@ static struct platform_device mst_flash_device[2] = {
},
};
-static void mainstone_backlight_power(int on)
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+static int mainstone_backlight_update_status(struct backlight_device *bl)
{
- if (on) {
+ int brightness = bl->props.brightness;
+
+ if (bl->props.power != FB_BLANK_UNBLANK ||
+ bl->props.fb_blank != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ if (brightness != 0) {
pxa_gpio_mode(GPIO16_PWM0_MD);
pxa_set_cken(CKEN_PWM0, 1);
- PWM_CTRL0 = 0;
- PWM_PWDUTY0 = 0x3ff;
- PWM_PERVAL0 = 0x3ff;
- } else {
- PWM_CTRL0 = 0;
- PWM_PWDUTY0 = 0x0;
- PWM_PERVAL0 = 0x3FF;
+ }
+ PWM_CTRL0 = 0;
+ PWM_PWDUTY0 = brightness;
+ PWM_PERVAL0 = bl->props.max_brightness;
+ if (brightness == 0)
pxa_set_cken(CKEN_PWM0, 0);
+ return 0; /* pointless return value */
+}
+
+static int mainstone_backlight_get_brightness(struct backlight_device *bl)
+{
+ return PWM_PWDUTY0;
+}
+
+static /*const*/ struct backlight_ops mainstone_backlight_ops = {
+ .update_status = mainstone_backlight_update_status,
+ .get_brightness = mainstone_backlight_get_brightness,
+};
+
+static void __init mainstone_backlight_register(void)
+{
+ struct backlight_device *bl;
+
+ bl = backlight_device_register("mainstone-bl", &pxa_device_fb.dev,
+ NULL, &mainstone_backlight_ops);
+ if (IS_ERR(bl)) {
+ printk(KERN_ERR "mainstone: unable to register backlight: %ld\n",
+ PTR_ERR(bl));
+ return;
}
+
+ /*
+ * broken design - register-then-setup interfaces are
+ * utterly broken by definition.
+ */
+ bl->props.max_brightness = 1023;
+ bl->props.brightness = 1023;
+ backlight_update_status(bl);
}
+#else
+#define mainstone_backlight_register() do { } while (0)
+#endif
static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
.pixclock = 50000,
@@ -311,7 +356,6 @@ static struct pxafb_mach_info mainstone_pxafb_info = {
.num_modes = 1,
.lccr0 = LCCR0_Act,
.lccr3 = LCCR3_PCP,
- .pxafb_backlight_power = mainstone_backlight_power,
};
static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_int, void *data)
@@ -335,12 +379,10 @@ static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_in
err = request_irq(MAINSTONE_MMC_IRQ, mstone_detect_int, IRQF_DISABLED,
"MMC card detect", data);
- if (err) {
+ if (err)
printk(KERN_ERR "mainstone_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
- return -1;
- }
- return 0;
+ return err;
}
static void mainstone_mci_setpower(struct device *dev, unsigned int vdd)
@@ -473,6 +515,7 @@ static void __init mainstone_init(void)
mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode;
set_pxa_fb_info(&mainstone_pxafb_info);
+ mainstone_backlight_register();
pxa_set_mci_info(&mainstone_mci_platform_data);
pxa_set_ficp_info(&mainstone_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/mfp.c b/arch/arm/mach-pxa/mfp.c
index 436f96574964..f5809adce298 100644
--- a/arch/arm/mach-pxa/mfp.c
+++ b/arch/arm/mach-pxa/mfp.c
@@ -17,9 +17,12 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/sysdev.h>
#include <asm/hardware.h>
#include <asm/arch/mfp.h>
+#include <asm/arch/mfp-pxa3xx.h>
+#include <asm/arch/pxa3xx-regs.h>
/* mfp_spin_lock is used to ensure that MFP register configuration
* (most likely a read-modify-write operation) is atomic, and that
@@ -28,43 +31,110 @@
static DEFINE_SPINLOCK(mfp_spin_lock);
static void __iomem *mfpr_mmio_base = (void __iomem *)&__REG(MFPR_BASE);
+
+struct pxa3xx_mfp_pin {
+ unsigned long config; /* -1 for not configured */
+ unsigned long mfpr_off; /* MFPRxx Register offset */
+ unsigned long mfpr_run; /* Run-Mode Register Value */
+ unsigned long mfpr_lpm; /* Low Power Mode Register Value */
+};
+
static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX];
+/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
+const static unsigned long mfpr_lpm[] = {
+ MFPR_LPM_INPUT,
+ MFPR_LPM_DRIVE_LOW,
+ MFPR_LPM_DRIVE_HIGH,
+ MFPR_LPM_PULL_LOW,
+ MFPR_LPM_PULL_HIGH,
+ MFPR_LPM_FLOAT,
+};
+
+/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
+const static unsigned long mfpr_pull[] = {
+ MFPR_PULL_NONE,
+ MFPR_PULL_LOW,
+ MFPR_PULL_HIGH,
+ MFPR_PULL_BOTH,
+};
+
+/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
+const static unsigned long mfpr_edge[] = {
+ MFPR_EDGE_NONE,
+ MFPR_EDGE_RISE,
+ MFPR_EDGE_FALL,
+ MFPR_EDGE_BOTH,
+};
+
#define mfpr_readl(off) \
__raw_readl(mfpr_mmio_base + (off))
#define mfpr_writel(off, val) \
__raw_writel(val, mfpr_mmio_base + (off))
+#define mfp_configured(p) ((p)->config != -1)
+
/*
* perform a read-back of any MFPR register to make sure the
* previous writings are finished
*/
#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0)
-static inline void __mfp_config(int pin, unsigned long val)
+static inline void __mfp_config_run(struct pxa3xx_mfp_pin *p)
{
- unsigned long off = mfp_table[pin].mfpr_off;
+ if (mfp_configured(p))
+ mfpr_writel(p->mfpr_off, p->mfpr_run);
+}
- mfp_table[pin].mfpr_val = val;
- mfpr_writel(off, val);
+static inline void __mfp_config_lpm(struct pxa3xx_mfp_pin *p)
+{
+ if (mfp_configured(p)) {
+ unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
+ if (mfpr_clr != p->mfpr_run)
+ mfpr_writel(p->mfpr_off, mfpr_clr);
+ if (p->mfpr_lpm != mfpr_clr)
+ mfpr_writel(p->mfpr_off, p->mfpr_lpm);
+ }
}
-void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num)
+void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num)
{
- int i, pin;
- unsigned long val, flags;
- mfp_cfg_t *mfp_cfg = mfp_cfgs;
+ unsigned long flags;
+ int i;
spin_lock_irqsave(&mfp_spin_lock, flags);
- for (i = 0; i < num; i++, mfp_cfg++) {
- pin = MFP_CFG_PIN(*mfp_cfg);
- val = MFP_CFG_VAL(*mfp_cfg);
+ for (i = 0; i < num; i++, mfp_cfgs++) {
+ unsigned long tmp, c = *mfp_cfgs;
+ struct pxa3xx_mfp_pin *p;
+ int pin, af, drv, lpm, edge, pull;
+ pin = MFP_PIN(c);
BUG_ON(pin >= MFP_PIN_MAX);
-
- __mfp_config(pin, val);
+ p = &mfp_table[pin];
+
+ af = MFP_AF(c);
+ drv = MFP_DS(c);
+ lpm = MFP_LPM_STATE(c);
+ edge = MFP_LPM_EDGE(c);
+ pull = MFP_PULL(c);
+
+ /* run-mode pull settings will conflict with MFPR bits of
+ * low power mode state, calculate mfpr_run and mfpr_lpm
+ * individually if pull != MFP_PULL_NONE
+ */
+ tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
+
+ if (likely(pull == MFP_PULL_NONE)) {
+ p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+ p->mfpr_lpm = p->mfpr_run;
+ } else {
+ p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+ p->mfpr_run = tmp | mfpr_pull[pull];
+ }
+
+ p->config = c; __mfp_config_run(p);
}
mfpr_sync();
@@ -96,140 +166,90 @@ void pxa3xx_mfp_write(int mfp, unsigned long val)
spin_unlock_irqrestore(&mfp_spin_lock, flags);
}
-void pxa3xx_mfp_set_afds(int mfp, int af, int ds)
-{
- uint32_t mfpr_off, mfpr_val;
- unsigned long flags;
-
- BUG_ON(mfp >= MFP_PIN_MAX);
-
- spin_lock_irqsave(&mfp_spin_lock, flags);
- mfpr_off = mfp_table[mfp].mfpr_off;
-
- mfpr_val = mfpr_readl(mfpr_off);
- mfpr_val &= ~(MFPR_AF_MASK | MFPR_DRV_MASK);
- mfpr_val |= (((af & 0x7) << MFPR_ALT_OFFSET) |
- ((ds & 0x7) << MFPR_DRV_OFFSET));
-
- mfpr_writel(mfpr_off, mfpr_val);
- mfpr_sync();
-
- spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void pxa3xx_mfp_set_rdh(int mfp, int rdh)
+void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map)
{
- uint32_t mfpr_off, mfpr_val;
- unsigned long flags;
-
- BUG_ON(mfp >= MFP_PIN_MAX);
+ struct pxa3xx_mfp_addr_map *p;
+ unsigned long offset, flags;
+ int i;
spin_lock_irqsave(&mfp_spin_lock, flags);
- mfpr_off = mfp_table[mfp].mfpr_off;
-
- mfpr_val = mfpr_readl(mfpr_off);
- mfpr_val &= ~MFPR_RDH_MASK;
-
- if (likely(rdh))
- mfpr_val |= (1u << MFPR_SS_OFFSET);
+ for (p = map; p->start != MFP_PIN_INVALID; p++) {
+ offset = p->offset;
+ i = p->start;
- mfpr_writel(mfpr_off, mfpr_val);
- mfpr_sync();
+ do {
+ mfp_table[i].mfpr_off = offset;
+ mfp_table[i].mfpr_run = 0;
+ mfp_table[i].mfpr_lpm = 0;
+ offset += 4; i++;
+ } while ((i <= p->end) && (p->end != -1));
+ }
spin_unlock_irqrestore(&mfp_spin_lock, flags);
}
-void pxa3xx_mfp_set_lpm(int mfp, int lpm)
+void __init pxa3xx_init_mfp(void)
{
- uint32_t mfpr_off, mfpr_val;
- unsigned long flags;
-
- BUG_ON(mfp >= MFP_PIN_MAX);
-
- spin_lock_irqsave(&mfp_spin_lock, flags);
-
- mfpr_off = mfp_table[mfp].mfpr_off;
- mfpr_val = mfpr_readl(mfpr_off);
- mfpr_val &= ~MFPR_LPM_MASK;
-
- if (lpm & 0x1) mfpr_val |= 1u << MFPR_SON_OFFSET;
- if (lpm & 0x2) mfpr_val |= 1u << MFPR_SD_OFFSET;
- if (lpm & 0x4) mfpr_val |= 1u << MFPR_PU_OFFSET;
- if (lpm & 0x8) mfpr_val |= 1u << MFPR_PD_OFFSET;
- if (lpm &0x10) mfpr_val |= 1u << MFPR_PS_OFFSET;
-
- mfpr_writel(mfpr_off, mfpr_val);
- mfpr_sync();
+ int i;
- spin_unlock_irqrestore(&mfp_spin_lock, flags);
+ for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
+ mfp_table[i].config = -1;
}
-void pxa3xx_mfp_set_pull(int mfp, int pull)
+#ifdef CONFIG_PM
+/*
+ * Configure the MFPs appropriately for suspend/resume.
+ * FIXME: this should probably depend on which system state we're
+ * entering - for instance, we might not want to place MFP pins in
+ * a pull-down mode if they're an active low chip select, and we're
+ * just entering standby.
+ */
+static int pxa3xx_mfp_suspend(struct sys_device *d, pm_message_t state)
{
- uint32_t mfpr_off, mfpr_val;
- unsigned long flags;
-
- BUG_ON(mfp >= MFP_PIN_MAX);
-
- spin_lock_irqsave(&mfp_spin_lock, flags);
-
- mfpr_off = mfp_table[mfp].mfpr_off;
- mfpr_val = mfpr_readl(mfpr_off);
- mfpr_val &= ~MFPR_PULL_MASK;
- mfpr_val |= ((pull & 0x7u) << MFPR_PD_OFFSET);
-
- mfpr_writel(mfpr_off, mfpr_val);
- mfpr_sync();
+ int pin;
- spin_unlock_irqrestore(&mfp_spin_lock, flags);
+ for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) {
+ struct pxa3xx_mfp_pin *p = &mfp_table[pin];
+ __mfp_config_lpm(p);
+ }
+ return 0;
}
-void pxa3xx_mfp_set_edge(int mfp, int edge)
+static int pxa3xx_mfp_resume(struct sys_device *d)
{
- uint32_t mfpr_off, mfpr_val;
- unsigned long flags;
-
- BUG_ON(mfp >= MFP_PIN_MAX);
-
- spin_lock_irqsave(&mfp_spin_lock, flags);
-
- mfpr_off = mfp_table[mfp].mfpr_off;
- mfpr_val = mfpr_readl(mfpr_off);
+ int pin;
- mfpr_val &= ~MFPR_EDGE_MASK;
- mfpr_val |= (edge & 0x3u) << MFPR_ERE_OFFSET;
- mfpr_val |= (!edge & 0x1) << MFPR_EC_OFFSET;
+ for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) {
+ struct pxa3xx_mfp_pin *p = &mfp_table[pin];
+ __mfp_config_run(p);
+ }
- mfpr_writel(mfpr_off, mfpr_val);
- mfpr_sync();
+ /* clear RDH bit when MFP settings are restored
+ *
+ * NOTE: the last 3 bits DxS are write-1-to-clear so carefully
+ * preserve them here in case they will be referenced later
+ */
+ ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
- spin_unlock_irqrestore(&mfp_spin_lock, flags);
+ return 0;
}
-void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map)
-{
- struct pxa3xx_mfp_addr_map *p;
- unsigned long offset, flags;
- int i;
+static struct sysdev_class mfp_sysclass = {
+ .name = "mfp",
+ .suspend = pxa3xx_mfp_suspend,
+ .resume = pxa3xx_mfp_resume,
+};
- spin_lock_irqsave(&mfp_spin_lock, flags);
+static struct sys_device mfp_device = {
+ .id = 0,
+ .cls = &mfp_sysclass,
+};
- for (p = map; p->start != MFP_PIN_INVALID; p++) {
- offset = p->offset;
- i = p->start;
-
- do {
- mfp_table[i].mfpr_off = offset;
- mfp_table[i].mfpr_val = 0;
- offset += 4; i++;
- } while ((i <= p->end) && (p->end != -1));
- }
-
- spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void __init pxa3xx_init_mfp(void)
+static int __init mfp_init_devicefs(void)
{
- memset(mfp_table, 0, sizeof(mfp_table));
+ sysdev_class_register(&mfp_sysclass);
+ return sysdev_register(&mfp_device);
}
+device_initcall(mfp_init_devicefs);
+#endif
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
new file mode 100644
index 000000000000..c14696b9979d
--- /dev/null
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -0,0 +1,217 @@
+/*
+ * linux/arch/arm/mach-pxa/pcm027.c
+ * Support for the Phytec phyCORE-PXA270 CPU card (aka PCM-027).
+ *
+ * Refer
+ * http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-XScale-PXA270.html
+ * for additional hardware info
+ *
+ * Author: Juergen Kilb
+ * Created: April 05, 2005
+ * Copyright: Phytec Messtechnik GmbH
+ * e-Mail: armlinux@phytec.de
+ *
+ * based on Intel Mainstone Board
+ *
+ * Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
+#include <asm/arch/pxa2xx_spi.h>
+#include <asm/arch/pcm027.h>
+#include "generic.h"
+
+/*
+ * ABSTRACT:
+ *
+ * The PXA270 processor comes with a bunch of hardware on its silicon.
+ * Not all of this hardware can be used at the same time and not all
+ * is routed to module's connectors. Also it depends on the baseboard, what
+ * kind of hardware can be used in which way.
+ * -> So this file supports the main devices on the CPU card only!
+ * Refer pcm990-baseboard.c how to extend this features to get a full
+ * blown system with many common interfaces.
+ *
+ * The PCM-027 supports the following interfaces through its connectors and
+ * will be used in pcm990-baseboard.c:
+ *
+ * - LCD support
+ * - MMC support
+ * - IDE/CF card
+ * - FFUART
+ * - BTUART
+ * - IRUART
+ * - AC97
+ * - SSP
+ * - SSP3
+ *
+ * Claimed GPIOs:
+ * GPIO0 -> IRQ input from RTC
+ * GPIO2 -> SYS_ENA*)
+ * GPIO3 -> PWR_SCL
+ * GPIO4 -> PWR_SDA
+ * GPIO5 -> PowerCap0*)
+ * GPIO6 -> PowerCap1*)
+ * GPIO7 -> PowerCap2*)
+ * GPIO8 -> PowerCap3*)
+ * GPIO15 -> /CS1
+ * GPIO20 -> /CS2
+ * GPIO21 -> /CS3
+ * GPIO33 -> /CS5 network controller select
+ * GPIO52 -> IRQ from network controller
+ * GPIO78 -> /CS2
+ * GPIO80 -> /CS4
+ * GPIO90 -> LED0
+ * GPIO91 -> LED1
+ * GPIO114 -> IRQ from CAN controller
+ * GPIO117 -> SCL
+ * GPIO118 -> SDA
+ *
+ * *) CPU internal use only
+ */
+
+/*
+ * SMC91x network controller specific stuff
+ */
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = PCM027_ETH_PHYS + 0x300,
+ .end = PCM027_ETH_PHYS + PCM027_ETH_SIZE,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PCM027_ETH_IRQ,
+ .end = PCM027_ETH_IRQ,
+ /* note: smc91x's driver doesn't use the trigger bits yet */
+ .flags = IORESOURCE_IRQ | PCM027_ETH_IRQ_EDGE,
+ }
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static struct physmap_flash_data pcm027_flash_data = {
+ .width = 4,
+};
+
+static struct resource pcm027_flash_resource = {
+ .start = PCM027_FLASH_PHYS,
+ .end = PCM027_FLASH_PHYS + PCM027_FLASH_SIZE - 1 ,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm027_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &pcm027_flash_data,
+ },
+ .resource = &pcm027_flash_resource,
+ .num_resources = 1,
+};
+
+#ifdef CONFIG_LEDS_GPIO
+
+static struct gpio_led pcm027_led[] = {
+ {
+ .name = "led0:red", /* FIXME */
+ .gpio = PCM027_LED_CPU
+ },
+ {
+ .name = "led1:green", /* FIXME */
+ .gpio = PCM027_LED_HEARD_BEAT
+ },
+};
+
+static struct gpio_led_platform_data pcm027_led_data = {
+ .num_leds = ARRAY_SIZE(pcm027_led),
+ .leds = pcm027_led
+};
+
+static struct platform_device pcm027_led_dev = {
+ .name = "leds-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &pcm027_led_data,
+ },
+};
+
+#endif /* CONFIG_LEDS_GPIO */
+
+/*
+ * declare the available device resources on this board
+ */
+static struct platform_device *devices[] __initdata = {
+ &smc91x_device,
+ &pcm027_flash,
+#ifdef CONFIG_LEDS_GPIO
+ &pcm027_led_dev
+#endif
+};
+
+/*
+ * pcm027_init - breath some life into the board
+ */
+static void __init pcm027_init(void)
+{
+ /* system bus arbiter setting
+ * - Core_Park
+ * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
+ */
+ ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ /* LEDs (on demand only) */
+#ifdef CONFIG_LEDS_GPIO
+ pxa_gpio_mode(PCM027_LED_CPU | GPIO_OUT);
+ pxa_gpio_mode(PCM027_LED_HEARD_BEAT | GPIO_OUT);
+#endif /* CONFIG_LEDS_GPIO */
+
+ /* at last call the baseboard to initialize itself */
+#ifdef CONFIG_MACH_PCM990_BASEBOARD
+ pcm990_baseboard_init();
+#endif
+}
+
+static void __init pcm027_map_io(void)
+{
+ pxa_map_io();
+
+ /* initialize sleep mode regs (wake-up sources, etc) */
+ PGSR0 = 0x01308000;
+ PGSR1 = 0x00CF0002;
+ PGSR2 = 0x0E294000;
+ PGSR3 = 0x0000C000;
+ PWER = 0x40000000 | PWER_GPIO0 | PWER_GPIO1;
+ PRER = 0x00000000;
+ PFER = 0x00000003;
+}
+
+MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
+ /* Maintainer: Pengutronix */
+ .boot_params = 0xa0000100,
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pcm027_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = pcm027_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
new file mode 100644
index 000000000000..3dda16a20049
--- /dev/null
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -0,0 +1,330 @@
+/*
+ * arch/arm/mach-pxa/pcm990-baseboard.c
+ * Support for the Phytec phyCORE-PXA270 Development Platform (PCM-990).
+ *
+ * Refer
+ * http://www.phytec.com/products/rdk/ARM-XScale/phyCORE-XScale-PXA270.html
+ * for additional hardware info
+ *
+ * Author: Juergen Kilb
+ * Created: April 05, 2005
+ * Copyright: Phytec Messtechnik GmbH
+ * e-Mail: armlinux@phytec.de
+ *
+ * based on Intel Mainstone Board
+ *
+ * Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/ide.h>
+#include <asm/mach/map.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/ohci.h>
+#include <asm/arch/pcm990_baseboard.h>
+
+/*
+ * The PCM-990 development baseboard uses PCM-027's hardeware in the
+ * following way:
+ *
+ * - LCD support is in use
+ * - GPIO16 is output for back light on/off with PWM
+ * - GPIO58 ... GPIO73 are outputs for display data
+ * - GPIO74 is output output for LCDFCLK
+ * - GPIO75 is output for LCDLCLK
+ * - GPIO76 is output for LCDPCLK
+ * - GPIO77 is output for LCDBIAS
+ * - MMC support is in use
+ * - GPIO32 is output for MMCCLK
+ * - GPIO92 is MMDAT0
+ * - GPIO109 is MMDAT1
+ * - GPIO110 is MMCS0
+ * - GPIO111 is MMCS1
+ * - GPIO112 is MMCMD
+ * - IDE/CF card is in use
+ * - GPIO48 is output /POE
+ * - GPIO49 is output /PWE
+ * - GPIO50 is output /PIOR
+ * - GPIO51 is output /PIOW
+ * - GPIO54 is output /PCE2
+ * - GPIO55 is output /PREG
+ * - GPIO56 is input /PWAIT
+ * - GPIO57 is output /PIOS16
+ * - GPIO79 is output PSKTSEL
+ * - GPIO85 is output /PCE1
+ * - FFUART is in use
+ * - GPIO34 is input FFRXD
+ * - GPIO35 is input FFCTS
+ * - GPIO36 is input FFDCD
+ * - GPIO37 is input FFDSR
+ * - GPIO38 is input FFRI
+ * - GPIO39 is output FFTXD
+ * - GPIO40 is output FFDTR
+ * - GPIO41 is output FFRTS
+ * - BTUART is in use
+ * - GPIO42 is input BTRXD
+ * - GPIO43 is output BTTXD
+ * - GPIO44 is input BTCTS
+ * - GPIO45 is output BTRTS
+ * - IRUART is in use
+ * - GPIO46 is input STDRXD
+ * - GPIO47 is output STDTXD
+ * - AC97 is in use*)
+ * - GPIO28 is input AC97CLK
+ * - GPIO29 is input AC97DatIn
+ * - GPIO30 is output AC97DatO
+ * - GPIO31 is output AC97SYNC
+ * - GPIO113 is output AC97_RESET
+ * - SSP is in use
+ * - GPIO23 is output SSPSCLK
+ * - GPIO24 is output chip select to Max7301
+ * - GPIO25 is output SSPTXD
+ * - GPIO26 is input SSPRXD
+ * - GPIO27 is input for Max7301 IRQ
+ * - GPIO53 is input SSPSYSCLK
+ * - SSP3 is in use
+ * - GPIO81 is output SSPTXD3
+ * - GPIO82 is input SSPRXD3
+ * - GPIO83 is output SSPSFRM
+ * - GPIO84 is output SSPCLK3
+ *
+ * Otherwise claimed GPIOs:
+ * GPIO1 -> IRQ from user switch
+ * GPIO9 -> IRQ from power management
+ * GPIO10 -> IRQ from WML9712 AC97 controller
+ * GPIO11 -> IRQ from IDE controller
+ * GPIO12 -> IRQ from CF controller
+ * GPIO13 -> IRQ from CF controller
+ * GPIO14 -> GPIO free
+ * GPIO15 -> /CS1 selects baseboard's Control CPLD (U7, 16 bit wide data path)
+ * GPIO19 -> GPIO free
+ * GPIO20 -> /SDCS2
+ * GPIO21 -> /CS3 PC card socket select
+ * GPIO33 -> /CS5 network controller select
+ * GPIO78 -> /CS2 (16 bit wide data path)
+ * GPIO80 -> /CS4 (16 bit wide data path)
+ * GPIO86 -> GPIO free
+ * GPIO87 -> GPIO free
+ * GPIO90 -> LED0 on CPU module
+ * GPIO91 -> LED1 on CPI module
+ * GPIO117 -> SCL
+ * GPIO118 -> SDA
+ */
+
+static unsigned long pcm990_irq_enabled;
+
+static void pcm990_mask_ack_irq(unsigned int irq)
+{
+ int pcm990_irq = (irq - PCM027_IRQ(0));
+ PCM990_INTMSKENA = (pcm990_irq_enabled &= ~(1 << pcm990_irq));
+}
+
+static void pcm990_unmask_irq(unsigned int irq)
+{
+ int pcm990_irq = (irq - PCM027_IRQ(0));
+ /* the irq can be acknowledged only if deasserted, so it's done here */
+ PCM990_INTSETCLR |= 1 << pcm990_irq;
+ PCM990_INTMSKENA = (pcm990_irq_enabled |= (1 << pcm990_irq));
+}
+
+static struct irq_chip pcm990_irq_chip = {
+ .mask_ack = pcm990_mask_ack_irq,
+ .unmask = pcm990_unmask_irq,
+};
+
+static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned long pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
+
+ do {
+ GEDR(PCM990_CTRL_INT_IRQ_GPIO) =
+ GPIO_bit(PCM990_CTRL_INT_IRQ_GPIO);
+ if (likely(pending)) {
+ irq = PCM027_IRQ(0) + __ffs(pending);
+ desc = irq_desc + irq;
+ desc_handle_irq(irq, desc);
+ }
+ pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
+ } while (pending);
+}
+
+static void __init pcm990_init_irq(void)
+{
+ int irq;
+
+ /* setup extra PCM990 irqs */
+ for (irq = PCM027_IRQ(0); irq <= PCM027_IRQ(3); irq++) {
+ set_irq_chip(irq, &pcm990_irq_chip);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+
+ PCM990_INTMSKENA = 0x00; /* disable all Interrupts */
+ PCM990_INTSETCLR = 0xFF;
+
+ set_irq_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler);
+ set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE);
+}
+
+static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
+ void *data)
+{
+ int err;
+
+ /*
+ * enable GPIO for PXA27x MMC controller
+ */
+ pxa_gpio_mode(GPIO32_MMCCLK_MD);
+ pxa_gpio_mode(GPIO112_MMCCMD_MD);
+ pxa_gpio_mode(GPIO92_MMCDAT0_MD);
+ pxa_gpio_mode(GPIO109_MMCDAT1_MD);
+ pxa_gpio_mode(GPIO110_MMCDAT2_MD);
+ pxa_gpio_mode(GPIO111_MMCDAT3_MD);
+
+ err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED,
+ "MMC card detect", data);
+ if (err)
+ printk(KERN_ERR "pcm990_mci_init: MMC/SD: can't request MMC "
+ "card detect IRQ\n");
+
+ return err;
+}
+
+static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+
+ if ((1 << vdd) & p_d->ocr_mask)
+ __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) =
+ PCM990_CTRL_MMC2PWR;
+ else
+ __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) =
+ ~PCM990_CTRL_MMC2PWR;
+}
+
+static void pcm990_mci_exit(struct device *dev, void *data)
+{
+ free_irq(PCM027_MMCDET_IRQ, data);
+}
+
+#define MSECS_PER_JIFFY (1000/HZ)
+
+static struct pxamci_platform_data pcm990_mci_platform_data = {
+ .detect_delay = 250 / MSECS_PER_JIFFY,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .init = pcm990_mci_init,
+ .setpower = pcm990_mci_setpower,
+ .exit = pcm990_mci_exit,
+};
+
+/*
+ * init OHCI hardware to work with
+ *
+ * Note: Only USB port 1 (host only) is connected
+ *
+ * GPIO88 (USBHPWR#1): overcurrent in, overcurrent when low
+ * GPIO89 (USBHPEN#1): power-on out, on when low
+ */
+static int pcm990_ohci_init(struct device *dev)
+{
+ pxa_gpio_mode(PCM990_USB_OVERCURRENT);
+ pxa_gpio_mode(PCM990_USB_PWR_EN);
+ /*
+ * disable USB port 2 and 3
+ * power sense is active low
+ */
+ UHCHR = ((UHCHR) | UHCHR_PCPL | UHCHR_PSPL | UHCHR_SSEP2 |
+ UHCHR_SSEP3) & ~(UHCHR_SSEP1 | UHCHR_SSE);
+ /*
+ * wait 10ms after Power on
+ * overcurrent per port
+ * power switch per port
+ */
+ UHCRHDA = (5<<24) | (1<<11) | (1<<8); /* FIXME: Required? */
+
+ return 0;
+}
+
+static struct pxaohci_platform_data pcm990_ohci_platform_data = {
+ .port_mode = PMM_PERPORT_MODE,
+ .init = pcm990_ohci_init,
+ .exit = NULL,
+};
+
+/*
+ * AC97 support
+ * Note: The connected AC97 mixer also reports interrupts at PCM990_AC97_IRQ
+ */
+static struct resource pxa27x_ac97_resources[] = {
+ [0] = {
+ .start = 0x40500000,
+ .end = 0x40500000 + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_AC97,
+ .end = IRQ_AC97,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 pxa_ac97_dmamask = 0xffffffffUL;
+
+static struct platform_device pxa27x_device_ac97 = {
+ .name = "pxa2xx-ac97",
+ .id = -1,
+ .dev = {
+ .dma_mask = &pxa_ac97_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxa27x_ac97_resources),
+ .resource = pxa27x_ac97_resources,
+};
+
+/*
+ * enable generic access to the base board control CPLDs U6 and U7
+ */
+static struct map_desc pcm990_io_desc[] __initdata = {
+ {
+ .virtual = PCM990_CTRL_BASE,
+ .pfn = __phys_to_pfn(PCM990_CTRL_PHYS),
+ .length = PCM990_CTRL_SIZE,
+ .type = MT_DEVICE /* CPLD */
+ }, {
+ .virtual = PCM990_CF_PLD_BASE,
+ .pfn = __phys_to_pfn(PCM990_CF_PLD_PHYS),
+ .length = PCM990_CF_PLD_SIZE,
+ .type = MT_DEVICE /* CPLD */
+ }
+};
+
+/*
+ * system init for baseboard usage. Will be called by pcm027 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init pcm990_baseboard_init(void)
+{
+ /* register CPLD access */
+ iotable_init(pcm990_io_desc, ARRAY_SIZE(pcm990_io_desc));
+
+ /* register CPLD's IRQ controller */
+ pcm990_init_irq();
+
+ platform_device_register(&pxa27x_device_ac97);
+
+ /* MMC */
+ pxa_set_mci_info(&pcm990_mci_platform_data);
+
+ /* USB host */
+ pxa_set_ohci_info(&pcm990_ohci_platform_data);
+
+ printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n");
+}
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index a941c71c7d06..039194cbe477 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -38,34 +38,37 @@ int pxa_pm_enter(suspend_state_t state)
iwmmxt_task_disable(NULL);
#endif
- pxa_cpu_pm_fns->save(sleep_save);
+ /* skip registers saving for standby */
+ if (state != PM_SUSPEND_STANDBY) {
+ pxa_cpu_pm_fns->save(sleep_save);
+ /* before sleeping, calculate and save a checksum */
+ for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
+ sleep_save_checksum += sleep_save[i];
+ }
/* Clear sleep reset status */
RCSR = RCSR_SMR;
- /* before sleeping, calculate and save a checksum */
- for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
- sleep_save_checksum += sleep_save[i];
-
/* *** go zzz *** */
pxa_cpu_pm_fns->enter(state);
cpu_init();
- /* after sleeping, validate the checksum */
- for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
- checksum += sleep_save[i];
+ if (state != PM_SUSPEND_STANDBY) {
+ /* after sleeping, validate the checksum */
+ for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
+ checksum += sleep_save[i];
- /* if invalid, display message and wait for a hardware reset */
- if (checksum != sleep_save_checksum) {
+ /* if invalid, display message and wait for a hardware reset */
+ if (checksum != sleep_save_checksum) {
#ifdef CONFIG_ARCH_LUBBOCK
- LUB_HEXLED = 0xbadbadc5;
+ LUB_HEXLED = 0xbadbadc5;
#endif
- while (1)
- pxa_cpu_pm_fns->enter(state);
+ while (1)
+ pxa_cpu_pm_fns->enter(state);
+ }
+ pxa_cpu_pm_fns->restore(sleep_save);
}
- pxa_cpu_pm_fns->restore(sleep_save);
-
pr_debug("*** made it back from resume\n");
return 0;
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 655668d4d0e9..209eabf0ed3e 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -164,7 +164,7 @@ static struct resource poodlets_resources[] = {
},
};
-static unsigned long poodle_get_hsync_len(void)
+static unsigned long poodle_get_hsync_invperiod(void)
{
return 0;
}
@@ -174,9 +174,9 @@ static void poodle_null_hsync(void)
}
static struct corgits_machinfo poodle_ts_machinfo = {
- .get_hsync_len = poodle_get_hsync_len,
- .put_hsync = poodle_null_hsync,
- .wait_hsync = poodle_null_hsync,
+ .get_hsync_invperiod = poodle_get_hsync_invperiod,
+ .put_hsync = poodle_null_hsync,
+ .wait_hsync = poodle_null_hsync,
};
static struct platform_device poodle_ts_device = {
@@ -215,12 +215,10 @@ static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int,
err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
- if (err) {
+ if (err)
printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
- return -1;
- }
- return 0;
+ return err;
}
static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index dcd81f8d0833..599e53fcc2c5 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -21,6 +21,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/suspend.h>
+#include <linux/sysdev.h>
#include <asm/hardware.h>
#include <asm/arch/irqs.h>
@@ -111,21 +112,27 @@ static const struct clkops clk_pxa25x_lcd_ops = {
* 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
* 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly)
*/
+static struct clk pxa25x_hwuart_clk =
+ INIT_CKEN("UARTCLK", HWUART, 14745600, 1, &pxa_device_hwuart.dev)
+;
+
static struct clk pxa25x_clks[] = {
INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev),
INIT_CKEN("UARTCLK", FFUART, 14745600, 1, &pxa_device_ffuart.dev),
INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
- INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev),
INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
+
+ INIT_CKEN("SSPCLK", SSP, 3686400, 0, &pxa25x_device_ssp.dev),
+ INIT_CKEN("SSPCLK", NSSP, 3686400, 0, &pxa25x_device_nssp.dev),
+ INIT_CKEN("SSPCLK", ASSP, 3686400, 0, &pxa25x_device_assp.dev),
+
/*
INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL),
INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL),
- INIT_CKEN("SSPCLK", SSP, 3686400, 0, NULL),
INIT_CKEN("I2SCLK", I2S, 14745600, 0, NULL),
- INIT_CKEN("NSSPCLK", NSSP, 3686400, 0, NULL),
*/
INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
};
@@ -135,11 +142,6 @@ static struct clk pxa25x_clks[] = {
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
-#define RESTORE_GPLEVEL(n) do { \
- GPSR##n = sleep_save[SLEEP_SAVE_GPLR##n]; \
- GPCR##n = ~sleep_save[SLEEP_SAVE_GPLR##n]; \
-} while (0)
-
/*
* List of global PXA peripheral registers to preserve.
* More ones like CP and general purpose register values are preserved
@@ -147,10 +149,6 @@ static struct clk pxa25x_clks[] = {
*/
enum { SLEEP_SAVE_START = 0,
- SLEEP_SAVE_GPLR0, SLEEP_SAVE_GPLR1, SLEEP_SAVE_GPLR2,
- SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2,
- SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2,
- SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2,
SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2,
SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
@@ -159,7 +157,6 @@ enum { SLEEP_SAVE_START = 0,
SLEEP_SAVE_PSTR,
- SLEEP_SAVE_ICMR,
SLEEP_SAVE_CKEN,
SLEEP_SAVE_SIZE
@@ -168,42 +165,38 @@ enum { SLEEP_SAVE_START = 0,
static void pxa25x_cpu_pm_save(unsigned long *sleep_save)
{
- SAVE(GPLR0); SAVE(GPLR1); SAVE(GPLR2);
- SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2);
- SAVE(GRER0); SAVE(GRER1); SAVE(GRER2);
- SAVE(GFER0); SAVE(GFER1); SAVE(GFER2);
SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2);
SAVE(GAFR0_L); SAVE(GAFR0_U);
SAVE(GAFR1_L); SAVE(GAFR1_U);
SAVE(GAFR2_L); SAVE(GAFR2_U);
- SAVE(ICMR);
SAVE(CKEN);
SAVE(PSTR);
+
+ /* Clear GPIO transition detect bits */
+ GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2;
}
static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
{
+ /* ensure not to come back here if it wasn't intended */
+ PSPR = 0;
+
/* restore registers */
- RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2);
- RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2);
RESTORE(GAFR0_L); RESTORE(GAFR0_U);
RESTORE(GAFR1_L); RESTORE(GAFR1_U);
RESTORE(GAFR2_L); RESTORE(GAFR2_U);
- RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2);
- RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2);
RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2);
+ PSSR = PSSR_RDH | PSSR_PH;
+
RESTORE(CKEN);
- RESTORE(ICMR);
RESTORE(PSTR);
}
static void pxa25x_cpu_pm_enter(suspend_state_t state)
{
- CKEN = 0;
-
switch (state) {
case PM_SUSPEND_MEM:
/* set resume return address */
@@ -225,6 +218,8 @@ static void __init pxa25x_init_pm(void)
{
pxa_cpu_pm_fns = &pxa25x_cpu_pm_fns;
}
+#else
+static inline void pxa25x_init_pm(void) {}
#endif
/* PXA25x: supports wakeup from GPIO0..GPIO15 and RTC alarm
@@ -276,33 +271,53 @@ void __init pxa25x_init_irq(void)
}
static struct platform_device *pxa25x_devices[] __initdata = {
- &pxa_device_mci,
&pxa_device_udc,
- &pxa_device_fb,
&pxa_device_ffuart,
&pxa_device_btuart,
&pxa_device_stuart,
- &pxa_device_i2c,
&pxa_device_i2s,
- &pxa_device_ficp,
&pxa_device_rtc,
+ &pxa25x_device_ssp,
+ &pxa25x_device_nssp,
+ &pxa25x_device_assp,
+};
+
+static struct sys_device pxa25x_sysdev[] = {
+ {
+ .cls = &pxa_irq_sysclass,
+ }, {
+ .cls = &pxa_gpio_sysclass,
+ },
};
static int __init pxa25x_init(void)
{
- int ret = 0;
+ int i, ret = 0;
+
+ /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
+ if (cpu_is_pxa25x())
+ clks_register(&pxa25x_hwuart_clk, 1);
if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks));
if ((ret = pxa_init_dma(16)))
return ret;
-#ifdef CONFIG_PM
+
pxa25x_init_pm();
-#endif
+
+ for (i = 0; i < ARRAY_SIZE(pxa25x_sysdev); i++) {
+ ret = sysdev_register(&pxa25x_sysdev[i]);
+ if (ret)
+ pr_err("failed to register sysdev[%d]\n", i);
+ }
+
ret = platform_add_devices(pxa25x_devices,
ARRAY_SIZE(pxa25x_devices));
+ if (ret)
+ return ret;
}
+
/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
if (cpu_is_pxa25x())
ret = platform_device_register(&pxa_device_hwuart);
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 8e126e6b74c3..46a951c3e5a0 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -16,14 +16,17 @@
#include <linux/init.h>
#include <linux/suspend.h>
#include <linux/platform_device.h>
+#include <linux/sysdev.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/arch/irqs.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/ohci.h>
#include <asm/arch/pm.h>
#include <asm/arch/dma.h>
+#include <asm/arch/i2c.h>
#include "generic.h"
#include "devices.h"
@@ -150,11 +153,12 @@ static struct clk pxa27x_clks[] = {
INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev),
INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL),
+ INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
+ INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
+ INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
+
/*
INIT_CKEN("PWMCLK", PWM0, 13000000, 0, NULL),
- INIT_CKEN("SSPCLK", SSP1, 13000000, 0, NULL),
- INIT_CKEN("SSPCLK", SSP2, 13000000, 0, NULL),
- INIT_CKEN("SSPCLK", SSP3, 13000000, 0, NULL),
INIT_CKEN("MSLCLK", MSL, 48000000, 0, NULL),
INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL),
INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL),
@@ -168,11 +172,6 @@ static struct clk pxa27x_clks[] = {
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
-#define RESTORE_GPLEVEL(n) do { \
- GPSR##n = sleep_save[SLEEP_SAVE_GPLR##n]; \
- GPCR##n = ~sleep_save[SLEEP_SAVE_GPLR##n]; \
-} while (0)
-
/*
* List of global PXA peripheral registers to preserve.
* More ones like CP and general purpose register values are preserved
@@ -180,10 +179,6 @@ static struct clk pxa27x_clks[] = {
*/
enum { SLEEP_SAVE_START = 0,
- SLEEP_SAVE_GPLR0, SLEEP_SAVE_GPLR1, SLEEP_SAVE_GPLR2, SLEEP_SAVE_GPLR3,
- SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2, SLEEP_SAVE_GPDR3,
- SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2, SLEEP_SAVE_GRER3,
- SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2, SLEEP_SAVE_GFER3,
SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
@@ -193,7 +188,6 @@ enum { SLEEP_SAVE_START = 0,
SLEEP_SAVE_PSTR,
- SLEEP_SAVE_ICMR,
SLEEP_SAVE_CKEN,
SLEEP_SAVE_MDREFR,
@@ -205,10 +199,6 @@ enum { SLEEP_SAVE_START = 0,
void pxa27x_cpu_pm_save(unsigned long *sleep_save)
{
- SAVE(GPLR0); SAVE(GPLR1); SAVE(GPLR2); SAVE(GPLR3);
- SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2); SAVE(GPDR3);
- SAVE(GRER0); SAVE(GRER1); SAVE(GRER2); SAVE(GRER3);
- SAVE(GFER0); SAVE(GFER1); SAVE(GFER2); SAVE(GFER3);
SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2); SAVE(PGSR3);
SAVE(GAFR0_L); SAVE(GAFR0_U);
@@ -220,12 +210,8 @@ void pxa27x_cpu_pm_save(unsigned long *sleep_save)
SAVE(PWER); SAVE(PCFR); SAVE(PRER);
SAVE(PFER); SAVE(PKWR);
- SAVE(ICMR); ICMR = 0;
SAVE(CKEN);
SAVE(PSTR);
-
- /* Clear GPIO transition detect bits */
- GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2; GEDR3 = GEDR3;
}
void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
@@ -234,15 +220,10 @@ void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
PSPR = 0;
/* restore registers */
- RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1);
- RESTORE_GPLEVEL(2); RESTORE_GPLEVEL(3);
- RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2); RESTORE(GPDR3);
RESTORE(GAFR0_L); RESTORE(GAFR0_U);
RESTORE(GAFR1_L); RESTORE(GAFR1_U);
RESTORE(GAFR2_L); RESTORE(GAFR2_U);
RESTORE(GAFR3_L); RESTORE(GAFR3_U);
- RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2); RESTORE(GRER3);
- RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2); RESTORE(GFER3);
RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); RESTORE(PGSR3);
RESTORE(MDREFR);
@@ -253,9 +234,6 @@ void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
RESTORE(CKEN);
- ICLR = 0;
- ICCR = 1;
- RESTORE(ICMR);
RESTORE(PSTR);
}
@@ -263,12 +241,6 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
{
extern void pxa_cpu_standby(void);
- if (state == PM_SUSPEND_STANDBY)
- CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER) |
- (1 << CKEN_LCD) | (1 << CKEN_PWM0);
- else
- CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER);
-
/* ensure voltage-change sequencer not initiated, which hangs */
PCFR &= ~PCFR_FVC;
@@ -304,6 +276,8 @@ static void __init pxa27x_init_pm(void)
{
pxa_cpu_pm_fns = &pxa27x_cpu_pm_fns;
}
+#else
+static inline void pxa27x_init_pm(void) {}
#endif
/* PXA27x: Various gpios can issue wakeup events. This logic only
@@ -373,37 +347,6 @@ void __init pxa27x_init_irq(void)
* device registration specific to PXA27x.
*/
-static u64 pxa27x_dmamask = 0xffffffffUL;
-
-static struct resource pxa27x_ohci_resources[] = {
- [0] = {
- .start = 0x4C000000,
- .end = 0x4C00ff6f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBH1,
- .end = IRQ_USBH1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device pxa27x_device_ohci = {
- .name = "pxa27x-ohci",
- .id = -1,
- .dev = {
- .dma_mask = &pxa27x_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(pxa27x_ohci_resources),
- .resource = pxa27x_ohci_resources,
-};
-
-void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
-{
- pxa27x_device_ohci.dev.platform_data = info;
-}
-
static struct resource i2c_power_resources[] = {
{
.start = 0x40f00180,
@@ -423,34 +366,57 @@ struct platform_device pxa27x_device_i2c_power = {
.num_resources = ARRAY_SIZE(i2c_power_resources),
};
+void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info)
+{
+ pxa27x_device_i2c_power.dev.platform_data = info;
+}
+
static struct platform_device *devices[] __initdata = {
- &pxa_device_mci,
&pxa_device_udc,
- &pxa_device_fb,
&pxa_device_ffuart,
&pxa_device_btuart,
&pxa_device_stuart,
- &pxa_device_i2c,
&pxa_device_i2s,
- &pxa_device_ficp,
&pxa_device_rtc,
&pxa27x_device_i2c_power,
- &pxa27x_device_ohci,
+ &pxa27x_device_ssp1,
+ &pxa27x_device_ssp2,
+ &pxa27x_device_ssp3,
+};
+
+static struct sys_device pxa27x_sysdev[] = {
+ {
+ .id = 0,
+ .cls = &pxa_irq_sysclass,
+ }, {
+ .id = 1,
+ .cls = &pxa_irq_sysclass,
+ }, {
+ .cls = &pxa_gpio_sysclass,
+ },
};
static int __init pxa27x_init(void)
{
- int ret = 0;
+ int i, ret = 0;
+
if (cpu_is_pxa27x()) {
clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks));
if ((ret = pxa_init_dma(32)))
return ret;
-#ifdef CONFIG_PM
+
pxa27x_init_pm();
-#endif
+
+ for (i = 0; i < ARRAY_SIZE(pxa27x_sysdev); i++) {
+ ret = sysdev_register(&pxa27x_sysdev[i]);
+ if (ret)
+ pr_err("failed to register sysdev[%d]\n", i);
+ }
+
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
}
+
return ret;
}
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 61d9c9d69e6b..e47e67c11afe 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -19,6 +19,8 @@
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
#include <asm/hardware.h>
#include <asm/arch/pxa3xx-regs.h>
@@ -38,6 +40,7 @@
#define RO_CLK 60000000
#define ACCR_D0CS (1 << 26)
+#define ACCR_PCCE (1 << 11)
/* crystal frequency to static memory controller multiplier (SMCFS) */
static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
@@ -86,7 +89,7 @@ unsigned int pxa3xx_get_clk_frequency_khz(int info)
HSS / 1000000, (HSS % 1000000) / 10000);
}
- return CLK;
+ return CLK / 1000;
}
/*
@@ -189,8 +192,281 @@ static struct clk pxa3xx_clks[] = {
PXA3xx_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev),
PXA3xx_CKEN("UDCCLK", UDC, 48000000, 5, &pxa_device_udc.dev),
+ PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev),
+
+ PXA3xx_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
+ PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
+ PXA3xx_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
+ PXA3xx_CKEN("SSPCLK", SSP4, 13000000, 0, &pxa3xx_device_ssp4.dev),
+
+ PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev),
+ PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev),
+ PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
+};
+
+#ifdef CONFIG_PM
+
+#define ISRAM_START 0x5c000000
+#define ISRAM_SIZE SZ_256K
+
+static void __iomem *sram;
+static unsigned long wakeup_src;
+
+#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
+#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
+
+enum { SLEEP_SAVE_START = 0,
+ SLEEP_SAVE_CKENA,
+ SLEEP_SAVE_CKENB,
+ SLEEP_SAVE_ACCR,
+
+ SLEEP_SAVE_SIZE,
+};
+
+static void pxa3xx_cpu_pm_save(unsigned long *sleep_save)
+{
+ SAVE(CKENA);
+ SAVE(CKENB);
+ SAVE(ACCR);
+}
+
+static void pxa3xx_cpu_pm_restore(unsigned long *sleep_save)
+{
+ RESTORE(ACCR);
+ RESTORE(CKENA);
+ RESTORE(CKENB);
+}
+
+/*
+ * Enter a standby mode (S0D1C2 or S0D2C2). Upon wakeup, the dynamic
+ * memory controller has to be reinitialised, so we place some code
+ * in the SRAM to perform this function.
+ *
+ * We disable FIQs across the standby - otherwise, we might receive a
+ * FIQ while the SDRAM is unavailable.
+ */
+static void pxa3xx_cpu_standby(unsigned int pwrmode)
+{
+ extern const char pm_enter_standby_start[], pm_enter_standby_end[];
+ void (*fn)(unsigned int) = (void __force *)(sram + 0x8000);
+
+ memcpy_toio(sram + 0x8000, pm_enter_standby_start,
+ pm_enter_standby_end - pm_enter_standby_start);
+
+ AD2D0SR = ~0;
+ AD2D1SR = ~0;
+ AD2D0ER = wakeup_src;
+ AD2D1ER = 0;
+ ASCR = ASCR;
+ ARSR = ARSR;
+
+ local_fiq_disable();
+ fn(pwrmode);
+ local_fiq_enable();
+
+ AD2D0ER = 0;
+ AD2D1ER = 0;
+
+ printk("PM: AD2D0SR=%08x ASCR=%08x\n", AD2D0SR, ASCR);
+}
+
+/*
+ * NOTE: currently, the OBM (OEM Boot Module) binary comes along with
+ * PXA3xx development kits assumes that the resuming process continues
+ * with the address stored within the first 4 bytes of SDRAM. The PSPR
+ * register is used privately by BootROM and OBM, and _must_ be set to
+ * 0x5c014000 for the moment.
+ */
+static void pxa3xx_cpu_pm_suspend(void)
+{
+ volatile unsigned long *p = (volatile void *)0xc0000000;
+ unsigned long saved_data = *p;
+
+ extern void pxa3xx_cpu_suspend(void);
+ extern void pxa3xx_cpu_resume(void);
+
+ /* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
+ CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
+ CKENB |= 1 << (CKEN_HSIO2 & 0x1f);
+
+ /* clear and setup wakeup source */
+ AD3SR = ~0;
+ AD3ER = wakeup_src;
+ ASCR = ASCR;
+ ARSR = ARSR;
+
+ PCFR |= (1u << 13); /* L1_DIS */
+ PCFR &= ~((1u << 12) | (1u << 1)); /* L0_EN | SL_ROD */
+
+ PSPR = 0x5c014000;
+
+ /* overwrite with the resume address */
+ *p = virt_to_phys(pxa3xx_cpu_resume);
+
+ pxa3xx_cpu_suspend();
+
+ *p = saved_data;
+
+ AD3ER = 0;
+}
+
+static void pxa3xx_cpu_pm_enter(suspend_state_t state)
+{
+ /*
+ * Don't sleep if no wakeup sources are defined
+ */
+ if (wakeup_src == 0)
+ return;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ pxa3xx_cpu_standby(PXA3xx_PM_S0D2C2);
+ break;
+
+ case PM_SUSPEND_MEM:
+ pxa3xx_cpu_pm_suspend();
+ break;
+ }
+}
+
+static int pxa3xx_cpu_pm_valid(suspend_state_t state)
+{
+ return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
+}
+
+static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
+ .save_size = SLEEP_SAVE_SIZE,
+ .save = pxa3xx_cpu_pm_save,
+ .restore = pxa3xx_cpu_pm_restore,
+ .valid = pxa3xx_cpu_pm_valid,
+ .enter = pxa3xx_cpu_pm_enter,
};
+static void __init pxa3xx_init_pm(void)
+{
+ sram = ioremap(ISRAM_START, ISRAM_SIZE);
+ if (!sram) {
+ printk(KERN_ERR "Unable to map ISRAM: disabling standby/suspend\n");
+ return;
+ }
+
+ /*
+ * Since we copy wakeup code into the SRAM, we need to ensure
+ * that it is preserved over the low power modes. Note: bit 8
+ * is undocumented in the developer manual, but must be set.
+ */
+ AD1R |= ADXR_L2 | ADXR_R0;
+ AD2R |= ADXR_L2 | ADXR_R0;
+ AD3R |= ADXR_L2 | ADXR_R0;
+
+ /*
+ * Clear the resume enable registers.
+ */
+ AD1D0ER = 0;
+ AD2D0ER = 0;
+ AD2D1ER = 0;
+ AD3ER = 0;
+
+ pxa_cpu_pm_fns = &pxa3xx_cpu_pm_fns;
+}
+
+static int pxa3xx_set_wake(unsigned int irq, unsigned int on)
+{
+ unsigned long flags, mask = 0;
+
+ switch (irq) {
+ case IRQ_SSP3:
+ mask = ADXER_MFP_WSSP3;
+ break;
+ case IRQ_MSL:
+ mask = ADXER_WMSL0;
+ break;
+ case IRQ_USBH2:
+ case IRQ_USBH1:
+ mask = ADXER_WUSBH;
+ break;
+ case IRQ_KEYPAD:
+ mask = ADXER_WKP;
+ break;
+ case IRQ_AC97:
+ mask = ADXER_MFP_WAC97;
+ break;
+ case IRQ_USIM:
+ mask = ADXER_WUSIM0;
+ break;
+ case IRQ_SSP2:
+ mask = ADXER_MFP_WSSP2;
+ break;
+ case IRQ_I2C:
+ mask = ADXER_MFP_WI2C;
+ break;
+ case IRQ_STUART:
+ mask = ADXER_MFP_WUART3;
+ break;
+ case IRQ_BTUART:
+ mask = ADXER_MFP_WUART2;
+ break;
+ case IRQ_FFUART:
+ mask = ADXER_MFP_WUART1;
+ break;
+ case IRQ_MMC:
+ mask = ADXER_MFP_WMMC1;
+ break;
+ case IRQ_SSP:
+ mask = ADXER_MFP_WSSP1;
+ break;
+ case IRQ_RTCAlrm:
+ mask = ADXER_WRTC;
+ break;
+ case IRQ_SSP4:
+ mask = ADXER_MFP_WSSP4;
+ break;
+ case IRQ_TSI:
+ mask = ADXER_WTSI;
+ break;
+ case IRQ_USIM2:
+ mask = ADXER_WUSIM1;
+ break;
+ case IRQ_MMC2:
+ mask = ADXER_MFP_WMMC2;
+ break;
+ case IRQ_NAND:
+ mask = ADXER_MFP_WFLASH;
+ break;
+ case IRQ_USB2:
+ mask = ADXER_WUSB2;
+ break;
+ case IRQ_WAKEUP0:
+ mask = ADXER_WEXTWAKE0;
+ break;
+ case IRQ_WAKEUP1:
+ mask = ADXER_WEXTWAKE1;
+ break;
+ case IRQ_MMC3:
+ mask = ADXER_MFP_GEN12;
+ break;
+ }
+
+ local_irq_save(flags);
+ if (on)
+ wakeup_src |= mask;
+ else
+ wakeup_src &= ~mask;
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static void pxa3xx_init_irq_pm(void)
+{
+ pxa_init_irq_set_wake(pxa3xx_set_wake);
+}
+
+#else
+static inline void pxa3xx_init_pm(void) {}
+static inline void pxa3xx_init_irq_pm(void) {}
+#endif
+
void __init pxa3xx_init_irq(void)
{
/* enable CP6 access */
@@ -202,6 +478,7 @@ void __init pxa3xx_init_irq(void)
pxa_init_irq_low();
pxa_init_irq_high();
pxa_init_irq_gpio(128);
+ pxa3xx_init_irq_pm();
}
/*
@@ -209,21 +486,33 @@ void __init pxa3xx_init_irq(void)
*/
static struct platform_device *devices[] __initdata = {
- &pxa_device_mci,
&pxa_device_udc,
- &pxa_device_fb,
&pxa_device_ffuart,
&pxa_device_btuart,
&pxa_device_stuart,
- &pxa_device_i2c,
&pxa_device_i2s,
- &pxa_device_ficp,
&pxa_device_rtc,
+ &pxa27x_device_ssp1,
+ &pxa27x_device_ssp2,
+ &pxa27x_device_ssp3,
+ &pxa3xx_device_ssp4,
+};
+
+static struct sys_device pxa3xx_sysdev[] = {
+ {
+ .id = 0,
+ .cls = &pxa_irq_sysclass,
+ }, {
+ .id = 1,
+ .cls = &pxa_irq_sysclass,
+ }, {
+ .cls = &pxa_gpio_sysclass,
+ },
};
static int __init pxa3xx_init(void)
{
- int ret = 0;
+ int i, ret = 0;
if (cpu_is_pxa3xx()) {
clks_register(pxa3xx_clks, ARRAY_SIZE(pxa3xx_clks));
@@ -231,9 +520,18 @@ static int __init pxa3xx_init(void)
if ((ret = pxa_init_dma(32)))
return ret;
- return platform_add_devices(devices, ARRAY_SIZE(devices));
+ pxa3xx_init_pm();
+
+ for (i = 0; i < ARRAY_SIZE(pxa3xx_sysdev); i++) {
+ ret = sysdev_register(&pxa3xx_sysdev[i]);
+ if (ret)
+ pr_err("failed to register sysdev[%d]\n", i);
+ }
+
+ ret = platform_add_devices(devices, ARRAY_SIZE(devices));
}
- return 0;
+
+ return ret;
}
subsys_initcall(pxa3xx_init);
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index da4769caaf72..047909a76651 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -26,28 +26,15 @@ void corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo);
/*
- * SharpSL Backlight
+ * SharpSL/Corgi LCD Driver
*/
-void corgi_bl_set_intensity(int intensity);
-void spitz_bl_set_intensity(int intensity);
-void akita_bl_set_intensity(int intensity);
-
-
-/*
- * SharpSL Touchscreen Driver
- */
-unsigned long corgi_get_hsync_len(void);
-unsigned long spitz_get_hsync_len(void);
-void corgi_put_hsync(void);
-void spitz_put_hsync(void);
-void corgi_wait_hsync(void);
-void spitz_wait_hsync(void);
+void corgi_lcdtg_suspend(void);
+void corgi_lcdtg_hw_init(int mode);
/*
* SharpSL Battery/PM Driver
*/
-
#define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x))
/* MAX1111 Channel Definitions */
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index aff71fec618a..784716eb7fc5 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -16,6 +16,7 @@
#include <asm/hardware.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#define MDREFR_KDIV 0x200a4000 // all banks
#define CCCR_SLEEP 0x00000107 // L=7 2N=2 A=0 PPDIS=0 CPDIS=0
@@ -43,12 +44,115 @@ pxa_cpu_save_cp:
pxa_cpu_save_sp:
@ preserve phys address of stack
mov r0, sp
- mov r2, lr
+ str lr, [sp, #-4]!
bl sleep_phys_sp
ldr r1, =sleep_save_sp
str r0, [r1]
- mov pc, r2
+ ldr pc, [sp], #4
+#ifdef CONFIG_PXA3xx
+/*
+ * pxa3xx_cpu_suspend() - forces CPU into sleep state (S2D3C4)
+ *
+ * NOTE: unfortunately, pxa_cpu_save_cp can not be reused here since
+ * the auxiliary control register address is different between pxa3xx
+ * and pxa{25x,27x}
+ */
+
+ENTRY(pxa3xx_cpu_suspend)
+
+#ifndef CONFIG_IWMMXT
+ mra r2, r3, acc0
+#endif
+ stmfd sp!, {r2 - r12, lr} @ save registers on stack
+
+ mrc p14, 0, r3, c6, c0, 0 @ clock configuration, for turbo mode
+ mrc p15, 0, r4, c15, c1, 0 @ CP access reg
+ mrc p15, 0, r5, c13, c0, 0 @ PID
+ mrc p15, 0, r6, c3, c0, 0 @ domain ID
+ mrc p15, 0, r7, c2, c0, 0 @ translation table base addr
+ mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg
+ mrc p15, 0, r9, c1, c0, 0 @ control reg
+
+ bic r3, r3, #2 @ clear frequency change bit
+
+ @ store them plus current virtual stack ptr on stack
+ mov r10, sp
+ stmfd sp!, {r3 - r10}
+
+ @ store physical address of stack pointer
+ mov r0, sp
+ bl sleep_phys_sp
+ ldr r1, =sleep_save_sp
+ str r0, [r1]
+
+ @ clean data cache
+ bl xsc3_flush_kern_cache_all
+
+ mov r0, #0x06 @ S2D3C4 mode
+ mcr p14, 0, r0, c7, c0, 0 @ enter sleep
+
+20: b 20b @ waiting for sleep
+
+ .data
+ .align 5
+/*
+ * pxa3xx_cpu_resume
+ */
+
+ENTRY(pxa3xx_cpu_resume)
+
+ mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off
+ msr cpsr_c, r0
+
+ ldr r0, sleep_save_sp @ stack phys addr
+ ldmfd r0, {r3 - r9, sp} @ CP regs + virt stack ptr
+
+ mov r1, #0
+ mcr p15, 0, r1, c7, c7, 0 @ invalidate I & D caches, BTB
+ mcr p15, 0, r1, c7, c10, 4 @ drain write (&fill) buffer
+ mcr p15, 0, r1, c7, c5, 4 @ flush prefetch buffer
+ mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
+
+ mcr p14, 0, r3, c6, c0, 0 @ clock configuration, turbo mode.
+ mcr p15, 0, r4, c15, c1, 0 @ CP access reg
+ mcr p15, 0, r5, c13, c0, 0 @ PID
+ mcr p15, 0, r6, c3, c0, 0 @ domain ID
+ mcr p15, 0, r7, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg
+
+ @ temporarily map resume_turn_on_mmu into the page table,
+ @ otherwise prefetch abort occurs after MMU is turned on
+ mov r1, r7
+ bic r1, r1, #0x00ff
+ bic r1, r1, #0x3f00
+ ldr r2, =0x542e
+
+ adr r3, resume_turn_on_mmu
+ mov r3, r3, lsr #20
+ orr r4, r2, r3, lsl #20
+ ldr r5, [r1, r3, lsl #2]
+ str r4, [r1, r3, lsl #2]
+
+ @ Mapping page table address in the page table
+ mov r6, r1, lsr #20
+ orr r7, r2, r6, lsl #20
+ ldr r8, [r1, r6, lsl #2]
+ str r7, [r1, r6, lsl #2]
+
+ ldr r2, =pxa3xx_resume_after_mmu @ absolute virtual address
+ b resume_turn_on_mmu @ cache align execution
+
+ .text
+pxa3xx_resume_after_mmu:
+ /* restore the temporary mapping */
+ str r5, [r1, r3, lsl #2]
+ str r8, [r1, r6, lsl #2]
+ b resume_after_mmu
+
+#endif /* CONFIG_PXA3xx */
+
+#ifdef CONFIG_PXA27x
/*
* pxa27x_cpu_suspend()
*
@@ -104,9 +208,11 @@ ENTRY(pxa27x_cpu_suspend)
@ align execution to a cache line
b pxa_cpu_do_suspend
+#endif
+#ifdef CONFIG_PXA25x
/*
- * pxa27x_cpu_suspend()
+ * pxa25x_cpu_suspend()
*
* Forces CPU into sleep state.
*
@@ -169,6 +275,7 @@ ENTRY(pxa25x_cpu_suspend)
mcr p14, 0, r0, c6, c0, 0
orr r0, r0, #2 @ initiate change bit
b pxa_cpu_do_suspend
+#endif
.ltorg
.align 5
@@ -208,7 +315,7 @@ pxa_cpu_do_suspend:
20: b 20b @ loop waiting for sleep
/*
- * cpu_pxa_resume()
+ * pxa_cpu_resume()
*
* entry point from bootloader into kernel during resume
*
@@ -270,5 +377,3 @@ resume_after_mmu:
mar acc0, r2, r3
#endif
ldmfd sp!, {r4 - r12, pc} @ return to caller
-
-
diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c
new file mode 100644
index 000000000000..ad346addc028
--- /dev/null
+++ b/arch/arm/mach-pxa/smemc.c
@@ -0,0 +1,88 @@
+/*
+ * Static Memory Controller
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+
+#define SMEMC_PHYS_BASE (0x4A000000)
+#define SMEMC_PHYS_SIZE (0x90)
+
+#define MSC0 (0x08) /* Static Memory Controller Register 0 */
+#define MSC1 (0x0C) /* Static Memory Controller Register 1 */
+#define SXCNFG (0x1C) /* Synchronous Static Memory Control Register */
+#define MEMCLKCFG (0x68) /* Clock Configuration */
+#define CSADRCFG0 (0x80) /* Address Configuration Register for CS0 */
+#define CSADRCFG1 (0x84) /* Address Configuration Register for CS1 */
+#define CSADRCFG2 (0x88) /* Address Configuration Register for CS2 */
+#define CSADRCFG3 (0x8C) /* Address Configuration Register for CS3 */
+
+#ifdef CONFIG_PM
+static void __iomem *smemc_mmio_base;
+
+static unsigned long msc[2];
+static unsigned long sxcnfg, memclkcfg;
+static unsigned long csadrcfg[4];
+
+static int pxa3xx_smemc_suspend(struct sys_device *dev, pm_message_t state)
+{
+ msc[0] = __raw_readl(smemc_mmio_base + MSC0);
+ msc[1] = __raw_readl(smemc_mmio_base + MSC1);
+ sxcnfg = __raw_readl(smemc_mmio_base + SXCNFG);
+ memclkcfg = __raw_readl(smemc_mmio_base + MEMCLKCFG);
+ csadrcfg[0] = __raw_readl(smemc_mmio_base + CSADRCFG0);
+ csadrcfg[1] = __raw_readl(smemc_mmio_base + CSADRCFG1);
+ csadrcfg[2] = __raw_readl(smemc_mmio_base + CSADRCFG2);
+ csadrcfg[3] = __raw_readl(smemc_mmio_base + CSADRCFG3);
+
+ return 0;
+}
+
+static int pxa3xx_smemc_resume(struct sys_device *dev)
+{
+ __raw_writel(msc[0], smemc_mmio_base + MSC0);
+ __raw_writel(msc[1], smemc_mmio_base + MSC1);
+ __raw_writel(sxcnfg, smemc_mmio_base + SXCNFG);
+ __raw_writel(memclkcfg, smemc_mmio_base + MEMCLKCFG);
+ __raw_writel(csadrcfg[0], smemc_mmio_base + CSADRCFG0);
+ __raw_writel(csadrcfg[1], smemc_mmio_base + CSADRCFG1);
+ __raw_writel(csadrcfg[2], smemc_mmio_base + CSADRCFG2);
+ __raw_writel(csadrcfg[3], smemc_mmio_base + CSADRCFG3);
+
+ return 0;
+}
+
+static struct sysdev_class smemc_sysclass = {
+ .name = "smemc",
+ .suspend = pxa3xx_smemc_suspend,
+ .resume = pxa3xx_smemc_resume,
+};
+
+static struct sys_device smemc_sysdev = {
+ .id = 0,
+ .cls = &smemc_sysclass,
+};
+
+static int __init smemc_init(void)
+{
+ int ret = 0;
+
+ if (cpu_is_pxa3xx()) {
+ smemc_mmio_base = ioremap(SMEMC_PHYS_BASE, SMEMC_PHYS_SIZE);
+ if (smemc_mmio_base == NULL)
+ return -ENODEV;
+
+ ret = sysdev_class_register(&smemc_sysclass);
+ if (ret)
+ return ret;
+
+ ret = sysdev_register(&smemc_sysdev);
+ }
+
+ return ret;
+}
+subsys_initcall(smemc_init);
+#endif
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 2d78199d24af..9e7773fca01c 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -36,6 +36,7 @@
#include <asm/mach/irq.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
#include <asm/arch/ohci.h>
@@ -271,6 +272,55 @@ static struct platform_device spitzled_device = {
/*
* Spitz Touch Screen Device
*/
+
+static unsigned long (*get_hsync_invperiod)(struct device *dev);
+
+static void inline sharpsl_wait_sync(int gpio)
+{
+ while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
+ while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
+}
+
+static struct device *spitz_pxafb_dev;
+
+static int is_pxafb_device(struct device * dev, void * data)
+{
+ struct platform_device *pdev = container_of(dev, struct platform_device, dev);
+
+ return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
+}
+
+static unsigned long spitz_get_hsync_invperiod(void)
+{
+#ifdef CONFIG_FB_PXA
+ if (!spitz_pxafb_dev) {
+ spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
+ if (!spitz_pxafb_dev)
+ return 0;
+ }
+ if (!get_hsync_invperiod)
+ get_hsync_invperiod = symbol_get(pxafb_get_hsync_time);
+ if (!get_hsync_invperiod)
+#endif
+ return 0;
+
+ return get_hsync_invperiod(spitz_pxafb_dev);
+}
+
+static void spitz_put_hsync(void)
+{
+ put_device(spitz_pxafb_dev);
+ if (get_hsync_invperiod)
+ symbol_put(pxafb_get_hsync_time);
+ spitz_pxafb_dev = NULL;
+ get_hsync_invperiod = NULL;
+}
+
+static void spitz_wait_hsync(void)
+{
+ sharpsl_wait_sync(SPITZ_GPIO_HSYNC);
+}
+
static struct resource spitzts_resources[] = {
[0] = {
.start = SPITZ_IRQ_GPIO_TP_INT,
@@ -280,9 +330,9 @@ static struct resource spitzts_resources[] = {
};
static struct corgits_machinfo spitz_ts_machinfo = {
- .get_hsync_len = spitz_get_hsync_len,
- .put_hsync = spitz_put_hsync,
- .wait_hsync = spitz_wait_hsync,
+ .get_hsync_invperiod = spitz_get_hsync_invperiod,
+ .put_hsync = spitz_put_hsync,
+ .wait_hsync = spitz_wait_hsync,
};
static struct platform_device spitzts_device = {
@@ -325,12 +375,10 @@ static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, vo
err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
- if (err) {
+ if (err)
printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
- return -1;
- }
- return 0;
+ return err;
}
static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
@@ -423,6 +471,14 @@ static struct pxaficp_platform_data spitz_ficp_platform_data = {
* Spitz PXA Framebuffer
*/
+static void spitz_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+ if (on)
+ corgi_lcdtg_hw_init(var->xres);
+ else
+ corgi_lcdtg_suspend();
+}
+
static struct pxafb_mode_info spitz_pxafb_modes[] = {
{
.pixclock = 19231,
@@ -520,6 +576,27 @@ static void __init common_init(void)
set_pxa_fb_info(&spitz_pxafb_info);
}
+#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
+static void spitz_bl_set_intensity(int intensity)
+{
+ if (intensity > 0x10)
+ intensity += 0x10;
+
+ /* Bits 0-4 are accessed via the SSP interface */
+ corgi_ssp_blduty_set(intensity & 0x1f);
+
+ /* Bit 5 is via SCOOP */
+ if (intensity & 0x0020)
+ reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
+ else
+ set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
+
+ if (intensity)
+ set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
+ else
+ reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
+}
+
static void __init spitz_init(void)
{
platform_scoop_config = &spitz_pcmcia_config;
@@ -530,6 +607,7 @@ static void __init spitz_init(void)
platform_device_register(&spitzscoop2_device);
}
+#endif
#ifdef CONFIG_MACH_AKITA
/*
@@ -542,6 +620,26 @@ struct platform_device akitaioexp_device = {
EXPORT_SYMBOL_GPL(akitaioexp_device);
+static void akita_bl_set_intensity(int intensity)
+{
+ if (intensity > 0x10)
+ intensity += 0x10;
+
+ /* Bits 0-4 are accessed via the SSP interface */
+ corgi_ssp_blduty_set(intensity & 0x1f);
+
+ /* Bit 5 is via IO-Expander */
+ if (intensity & 0x0020)
+ akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
+ else
+ akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
+
+ if (intensity)
+ akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
+ else
+ akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
+}
+
static void __init akita_init(void)
{
spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode;
@@ -558,7 +656,6 @@ static void __init akita_init(void)
}
#endif
-
static void __init fixup_spitz(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 422afee88169..00af7f2fed66 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -32,45 +32,27 @@
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hardware.h>
#include <asm/arch/ssp.h>
#include <asm/arch/pxa-regs.h>
-
-#define PXA_SSP_PORTS 3
+#include <asm/arch/regs-ssp.h>
#define TIMEOUT 100000
-struct ssp_info_ {
- int irq;
- u32 clock;
-};
-
-/*
- * SSP port clock and IRQ settings
- */
-static const struct ssp_info_ ssp_info[PXA_SSP_PORTS] = {
-#if defined (CONFIG_PXA27x)
- {IRQ_SSP, CKEN_SSP1},
- {IRQ_SSP2, CKEN_SSP2},
- {IRQ_SSP3, CKEN_SSP3},
-#else
- {IRQ_SSP, CKEN_SSP},
- {IRQ_NSSP, CKEN_NSSP},
- {IRQ_ASSP, CKEN_ASSP},
-#endif
-};
-
-static DEFINE_MUTEX(mutex);
-static int use_count[PXA_SSP_PORTS] = {0, 0, 0};
-
static irqreturn_t ssp_interrupt(int irq, void *dev_id)
{
- struct ssp_dev *dev = (struct ssp_dev*) dev_id;
- unsigned int status = SSSR_P(dev->port);
+ struct ssp_dev *dev = dev_id;
+ struct ssp_device *ssp = dev->ssp;
+ unsigned int status;
- SSSR_P(dev->port) = status; /* clear status bits */
+ status = __raw_readl(ssp->mmio_base + SSSR);
+ __raw_writel(status, ssp->mmio_base + SSSR);
if (status & SSSR_ROR)
printk(KERN_WARNING "SSP(%d): receiver overrun\n", dev->port);
@@ -99,15 +81,16 @@ static irqreturn_t ssp_interrupt(int irq, void *dev_id)
*/
int ssp_write_word(struct ssp_dev *dev, u32 data)
{
+ struct ssp_device *ssp = dev->ssp;
int timeout = TIMEOUT;
- while (!(SSSR_P(dev->port) & SSSR_TNF)) {
+ while (!(__raw_readl(ssp->mmio_base + SSSR) & SSSR_TNF)) {
if (!--timeout)
return -ETIMEDOUT;
cpu_relax();
}
- SSDR_P(dev->port) = data;
+ __raw_writel(data, ssp->mmio_base + SSDR);
return 0;
}
@@ -129,15 +112,16 @@ int ssp_write_word(struct ssp_dev *dev, u32 data)
*/
int ssp_read_word(struct ssp_dev *dev, u32 *data)
{
+ struct ssp_device *ssp = dev->ssp;
int timeout = TIMEOUT;
- while (!(SSSR_P(dev->port) & SSSR_RNE)) {
+ while (!(__raw_readl(ssp->mmio_base + SSSR) & SSSR_RNE)) {
if (!--timeout)
return -ETIMEDOUT;
cpu_relax();
}
- *data = SSDR_P(dev->port);
+ *data = __raw_readl(ssp->mmio_base + SSDR);
return 0;
}
@@ -151,17 +135,28 @@ int ssp_read_word(struct ssp_dev *dev, u32 *data)
*/
int ssp_flush(struct ssp_dev *dev)
{
+ struct ssp_device *ssp = dev->ssp;
int timeout = TIMEOUT * 2;
+ /* ensure TX FIFO is empty instead of not full */
+ if (cpu_is_pxa3xx()) {
+ while (__raw_readl(ssp->mmio_base + SSSR) & 0xf00) {
+ if (!--timeout)
+ return -ETIMEDOUT;
+ cpu_relax();
+ }
+ timeout = TIMEOUT * 2;
+ }
+
do {
- while (SSSR_P(dev->port) & SSSR_RNE) {
+ while (__raw_readl(ssp->mmio_base + SSSR) & SSSR_RNE) {
if (!--timeout)
return -ETIMEDOUT;
- (void) SSDR_P(dev->port);
+ (void)__raw_readl(ssp->mmio_base + SSDR);
}
if (!--timeout)
return -ETIMEDOUT;
- } while (SSSR_P(dev->port) & SSSR_BSY);
+ } while (__raw_readl(ssp->mmio_base + SSSR) & SSSR_BSY);
return 0;
}
@@ -173,7 +168,12 @@ int ssp_flush(struct ssp_dev *dev)
*/
void ssp_enable(struct ssp_dev *dev)
{
- SSCR0_P(dev->port) |= SSCR0_SSE;
+ struct ssp_device *ssp = dev->ssp;
+ uint32_t sscr0;
+
+ sscr0 = __raw_readl(ssp->mmio_base + SSCR0);
+ sscr0 |= SSCR0_SSE;
+ __raw_writel(sscr0, ssp->mmio_base + SSCR0);
}
/**
@@ -183,7 +183,12 @@ void ssp_enable(struct ssp_dev *dev)
*/
void ssp_disable(struct ssp_dev *dev)
{
- SSCR0_P(dev->port) &= ~SSCR0_SSE;
+ struct ssp_device *ssp = dev->ssp;
+ uint32_t sscr0;
+
+ sscr0 = __raw_readl(ssp->mmio_base + SSCR0);
+ sscr0 &= ~SSCR0_SSE;
+ __raw_writel(sscr0, ssp->mmio_base + SSCR0);
}
/**
@@ -192,14 +197,16 @@ void ssp_disable(struct ssp_dev *dev)
*
* Save the configured SSP state for suspend.
*/
-void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp)
+void ssp_save_state(struct ssp_dev *dev, struct ssp_state *state)
{
- ssp->cr0 = SSCR0_P(dev->port);
- ssp->cr1 = SSCR1_P(dev->port);
- ssp->to = SSTO_P(dev->port);
- ssp->psp = SSPSP_P(dev->port);
+ struct ssp_device *ssp = dev->ssp;
+
+ state->cr0 = __raw_readl(ssp->mmio_base + SSCR0);
+ state->cr1 = __raw_readl(ssp->mmio_base + SSCR1);
+ state->to = __raw_readl(ssp->mmio_base + SSTO);
+ state->psp = __raw_readl(ssp->mmio_base + SSPSP);
- SSCR0_P(dev->port) &= ~SSCR0_SSE;
+ ssp_disable(dev);
}
/**
@@ -208,16 +215,18 @@ void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp)
*
* Restore the SSP configuration saved previously by ssp_save_state.
*/
-void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp)
+void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *state)
{
- SSSR_P(dev->port) = SSSR_ROR | SSSR_TUR | SSSR_BCE;
+ struct ssp_device *ssp = dev->ssp;
+ uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE;
- SSCR0_P(dev->port) = ssp->cr0 & ~SSCR0_SSE;
- SSCR1_P(dev->port) = ssp->cr1;
- SSTO_P(dev->port) = ssp->to;
- SSPSP_P(dev->port) = ssp->psp;
+ __raw_writel(sssr, ssp->mmio_base + SSSR);
- SSCR0_P(dev->port) = ssp->cr0;
+ __raw_writel(state->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0);
+ __raw_writel(state->cr1, ssp->mmio_base + SSCR1);
+ __raw_writel(state->to, ssp->mmio_base + SSTO);
+ __raw_writel(state->psp, ssp->mmio_base + SSPSP);
+ __raw_writel(state->cr0, ssp->mmio_base + SSCR0);
}
/**
@@ -231,15 +240,17 @@ void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp)
*/
int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed)
{
+ struct ssp_device *ssp = dev->ssp;
+
dev->mode = mode;
dev->flags = flags;
dev->psp_flags = psp_flags;
dev->speed = speed;
/* set up port type, speed, port settings */
- SSCR0_P(dev->port) = (dev->speed | dev->mode);
- SSCR1_P(dev->port) = dev->flags;
- SSPSP_P(dev->port) = dev->psp_flags;
+ __raw_writel((dev->speed | dev->mode), ssp->mmio_base + SSCR0);
+ __raw_writel(dev->flags, ssp->mmio_base + SSCR1);
+ __raw_writel(dev->psp_flags, ssp->mmio_base + SSPSP);
return 0;
}
@@ -256,44 +267,32 @@ int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 spee
*/
int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags)
{
+ struct ssp_device *ssp;
int ret;
- if (port > PXA_SSP_PORTS || port == 0)
+ ssp = ssp_request(port, "SSP");
+ if (ssp == NULL)
return -ENODEV;
- mutex_lock(&mutex);
- if (use_count[port - 1]) {
- mutex_unlock(&mutex);
- return -EBUSY;
- }
- use_count[port - 1]++;
-
- if (!request_mem_region(__PREG(SSCR0_P(port)), 0x2c, "SSP")) {
- use_count[port - 1]--;
- mutex_unlock(&mutex);
- return -EBUSY;
- }
+ dev->ssp = ssp;
dev->port = port;
/* do we need to get irq */
if (!(init_flags & SSP_NO_IRQ)) {
- ret = request_irq(ssp_info[port-1].irq, ssp_interrupt,
+ ret = request_irq(ssp->irq, ssp_interrupt,
0, "SSP", dev);
if (ret)
goto out_region;
- dev->irq = ssp_info[port-1].irq;
+ dev->irq = ssp->irq;
} else
dev->irq = 0;
/* turn on SSP port clock */
- pxa_set_cken(ssp_info[port-1].clock, 1);
- mutex_unlock(&mutex);
+ clk_enable(ssp->clk);
return 0;
out_region:
- release_mem_region(__PREG(SSCR0_P(port)), 0x2c);
- use_count[port - 1]--;
- mutex_unlock(&mutex);
+ ssp_free(ssp);
return ret;
}
@@ -304,23 +303,240 @@ out_region:
*/
void ssp_exit(struct ssp_dev *dev)
{
- mutex_lock(&mutex);
- SSCR0_P(dev->port) &= ~SSCR0_SSE;
+ struct ssp_device *ssp = dev->ssp;
+
+ ssp_disable(dev);
+ free_irq(dev->irq, dev);
+ clk_disable(ssp->clk);
+ ssp_free(ssp);
+}
+
+static DEFINE_MUTEX(ssp_lock);
+static LIST_HEAD(ssp_list);
+
+struct ssp_device *ssp_request(int port, const char *label)
+{
+ struct ssp_device *ssp = NULL;
+
+ mutex_lock(&ssp_lock);
+
+ list_for_each_entry(ssp, &ssp_list, node) {
+ if (ssp->port_id == port && ssp->use_count == 0) {
+ ssp->use_count++;
+ ssp->label = label;
+ break;
+ }
+ }
+
+ mutex_unlock(&ssp_lock);
+
+ if (ssp->port_id != port)
+ return NULL;
+
+ return ssp;
+}
+EXPORT_SYMBOL(ssp_request);
+
+void ssp_free(struct ssp_device *ssp)
+{
+ mutex_lock(&ssp_lock);
+ if (ssp->use_count) {
+ ssp->use_count--;
+ ssp->label = NULL;
+ } else
+ dev_err(&ssp->pdev->dev, "device already free\n");
+ mutex_unlock(&ssp_lock);
+}
+EXPORT_SYMBOL(ssp_free);
+
+static int __devinit ssp_probe(struct platform_device *pdev, int type)
+{
+ struct resource *res;
+ struct ssp_device *ssp;
+ int ret = 0;
+
+ ssp = kzalloc(sizeof(struct ssp_device), GFP_KERNEL);
+ if (ssp == NULL) {
+ dev_err(&pdev->dev, "failed to allocate memory");
+ return -ENOMEM;
+ }
+
+ ssp->clk = clk_get(&pdev->dev, "SSPCLK");
+ if (IS_ERR(ssp->clk)) {
+ ret = PTR_ERR(ssp->clk);
+ goto err_free;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ ret = -ENODEV;
+ goto err_free_clk;
+ }
+
+ res = request_mem_region(res->start, res->end - res->start + 1,
+ pdev->name);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "failed to request memory resource\n");
+ ret = -EBUSY;
+ goto err_free_clk;
+ }
+
+ ssp->phys_base = res->start;
+
+ ssp->mmio_base = ioremap(res->start, res->end - res->start + 1);
+ if (ssp->mmio_base == NULL) {
+ dev_err(&pdev->dev, "failed to ioremap() registers\n");
+ ret = -ENODEV;
+ goto err_free_mem;
+ }
+
+ ssp->irq = platform_get_irq(pdev, 0);
+ if (ssp->irq < 0) {
+ dev_err(&pdev->dev, "no IRQ resource defined\n");
+ ret = -ENODEV;
+ goto err_free_io;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "no SSP RX DRCMR defined\n");
+ ret = -ENODEV;
+ goto err_free_io;
+ }
+ ssp->drcmr_rx = res->start;
+
+ res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "no SSP TX DRCMR defined\n");
+ ret = -ENODEV;
+ goto err_free_io;
+ }
+ ssp->drcmr_tx = res->start;
+
+ /* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id
+ * starts from 0, do a translation here
+ */
+ ssp->port_id = pdev->id + 1;
+ ssp->use_count = 0;
+ ssp->type = type;
+
+ mutex_lock(&ssp_lock);
+ list_add(&ssp->node, &ssp_list);
+ mutex_unlock(&ssp_lock);
+
+ platform_set_drvdata(pdev, ssp);
+ return 0;
+
+err_free_io:
+ iounmap(ssp->mmio_base);
+err_free_mem:
+ release_mem_region(res->start, res->end - res->start + 1);
+err_free_clk:
+ clk_put(ssp->clk);
+err_free:
+ kfree(ssp);
+ return ret;
+}
+
+static int __devexit ssp_remove(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct ssp_device *ssp;
+
+ ssp = platform_get_drvdata(pdev);
+ if (ssp == NULL)
+ return -ENODEV;
+
+ iounmap(ssp->mmio_base);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, res->end - res->start + 1);
+
+ clk_put(ssp->clk);
- if (dev->port > PXA_SSP_PORTS || dev->port == 0) {
- printk(KERN_WARNING "SSP: tried to close invalid port\n");
- mutex_unlock(&mutex);
- return;
+ mutex_lock(&ssp_lock);
+ list_del(&ssp->node);
+ mutex_unlock(&ssp_lock);
+
+ kfree(ssp);
+ return 0;
+}
+
+static int __devinit pxa25x_ssp_probe(struct platform_device *pdev)
+{
+ return ssp_probe(pdev, PXA25x_SSP);
+}
+
+static int __devinit pxa25x_nssp_probe(struct platform_device *pdev)
+{
+ return ssp_probe(pdev, PXA25x_NSSP);
+}
+
+static int __devinit pxa27x_ssp_probe(struct platform_device *pdev)
+{
+ return ssp_probe(pdev, PXA27x_SSP);
+}
+
+static struct platform_driver pxa25x_ssp_driver = {
+ .driver = {
+ .name = "pxa25x-ssp",
+ },
+ .probe = pxa25x_ssp_probe,
+ .remove = __devexit_p(ssp_remove),
+};
+
+static struct platform_driver pxa25x_nssp_driver = {
+ .driver = {
+ .name = "pxa25x-nssp",
+ },
+ .probe = pxa25x_nssp_probe,
+ .remove = __devexit_p(ssp_remove),
+};
+
+static struct platform_driver pxa27x_ssp_driver = {
+ .driver = {
+ .name = "pxa27x-ssp",
+ },
+ .probe = pxa27x_ssp_probe,
+ .remove = __devexit_p(ssp_remove),
+};
+
+static int __init pxa_ssp_init(void)
+{
+ int ret = 0;
+
+ ret = platform_driver_register(&pxa25x_ssp_driver);
+ if (ret) {
+ printk(KERN_ERR "failed to register pxa25x_ssp_driver");
+ return ret;
+ }
+
+ ret = platform_driver_register(&pxa25x_nssp_driver);
+ if (ret) {
+ printk(KERN_ERR "failed to register pxa25x_nssp_driver");
+ return ret;
+ }
+
+ ret = platform_driver_register(&pxa27x_ssp_driver);
+ if (ret) {
+ printk(KERN_ERR "failed to register pxa27x_ssp_driver");
+ return ret;
}
- pxa_set_cken(ssp_info[dev->port-1].clock, 0);
- if (dev->irq)
- free_irq(dev->irq, dev);
- release_mem_region(__PREG(SSCR0_P(dev->port)), 0x2c);
- use_count[dev->port - 1]--;
- mutex_unlock(&mutex);
+ return ret;
+}
+
+static void __exit pxa_ssp_exit(void)
+{
+ platform_driver_unregister(&pxa25x_ssp_driver);
+ platform_driver_unregister(&pxa25x_nssp_driver);
+ platform_driver_unregister(&pxa27x_ssp_driver);
}
+arch_initcall(pxa_ssp_init);
+module_exit(pxa_ssp_exit);
+
EXPORT_SYMBOL(ssp_write_word);
EXPORT_SYMBOL(ssp_read_word);
EXPORT_SYMBOL(ssp_flush);
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index d774430d02c0..167412e6bec8 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -17,6 +17,7 @@
.text
+#ifdef CONFIG_PXA27x
ENTRY(pxa_cpu_standby)
ldr r0, =PSSR
mov r1, #(PSSR_PH | PSSR_STS)
@@ -29,3 +30,85 @@ ENTRY(pxa_cpu_standby)
1: mcr p14, 0, r2, c7, c0, 0 @ put the system into Standby
str r1, [r0] @ make sure PSSR_PH/STS are clear
mov pc, lr
+
+#endif
+
+#ifdef CONFIG_PXA3xx
+
+#define MDCNFG 0x0000
+#define MDCNFG_DMCEN (1 << 30)
+#define DDR_HCAL 0x0060
+#define DDR_HCAL_HCRNG 0x1f
+#define DDR_HCAL_HCPROG (1 << 28)
+#define DDR_HCAL_HCEN (1 << 31)
+#define DMCIER 0x0070
+#define DMCIER_EDLP (1 << 29)
+#define DMCISR 0x0078
+#define RCOMP 0x0100
+#define RCOMP_SWEVAL (1 << 31)
+
+ENTRY(pm_enter_standby_start)
+ mov r1, #0xf6000000 @ DMEMC_REG_BASE (MDCNFG)
+ add r1, r1, #0x00100000
+
+ /*
+ * Preload the TLB entry for accessing the dynamic memory
+ * controller registers. Note that page table lookups will
+ * fail until the dynamic memory controller has been
+ * reinitialised - and that includes MMU page table walks.
+ * This also means that only the dynamic memory controller
+ * can be reliably accessed in the code following standby.
+ */
+ ldr r2, [r1] @ Dummy read MDCNFG
+
+ mcr p14, 0, r0, c7, c0, 0
+ .rept 8
+ nop
+ .endr
+
+ ldr r0, [r1, #DDR_HCAL] @ Clear (and wait for) HCEN
+ bic r0, r0, #DDR_HCAL_HCEN
+ str r0, [r1, #DDR_HCAL]
+1: ldr r0, [r1, #DDR_HCAL]
+ tst r0, #DDR_HCAL_HCEN
+ bne 1b
+
+ ldr r0, [r1, #RCOMP] @ Initiate RCOMP
+ orr r0, r0, #RCOMP_SWEVAL
+ str r0, [r1, #RCOMP]
+
+ mov r0, #~0 @ Clear interrupts
+ str r0, [r1, #DMCISR]
+
+ ldr r0, [r1, #DMCIER] @ set DMIER[EDLP]
+ orr r0, r0, #DMCIER_EDLP
+ str r0, [r1, #DMCIER]
+
+ ldr r0, [r1, #DDR_HCAL] @ clear HCRNG, set HCPROG, HCEN
+ bic r0, r0, #DDR_HCAL_HCRNG
+ orr r0, r0, #DDR_HCAL_HCEN | DDR_HCAL_HCPROG
+ str r0, [r1, #DDR_HCAL]
+
+1: ldr r0, [r1, #DMCISR]
+ tst r0, #DMCIER_EDLP
+ beq 1b
+
+ ldr r0, [r1, #MDCNFG] @ set MDCNFG[DMCEN]
+ orr r0, r0, #MDCNFG_DMCEN
+ str r0, [r1, #MDCNFG]
+1: ldr r0, [r1, #MDCNFG]
+ tst r0, #MDCNFG_DMCEN
+ beq 1b
+
+ ldr r0, [r1, #DDR_HCAL] @ set DDR_HCAL[HCRNG]
+ orr r0, r0, #2 @ HCRNG
+ str r0, [r1, #DDR_HCAL]
+
+ ldr r0, [r1, #DMCIER] @ Clear the interrupt
+ bic r0, r0, #0x20000000
+ str r0, [r1, #DMCIER]
+
+ mov pc, lr
+ENTRY(pm_enter_standby_end)
+
+#endif
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index fbfa1920353d..7b7c0179795b 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -59,55 +59,17 @@ unsigned long long sched_clock(void)
}
+#define MIN_OSCR_DELTA 16
+
static irqreturn_t
pxa_ost0_interrupt(int irq, void *dev_id)
{
- int next_match;
struct clock_event_device *c = dev_id;
- if (c->mode == CLOCK_EVT_MODE_ONESHOT) {
- /* Disarm the compare/match, signal the event. */
- OIER &= ~OIER_E0;
- OSSR = OSSR_M0;
- c->event_handler(c);
- } else if (c->mode == CLOCK_EVT_MODE_PERIODIC) {
- /* Call the event handler as many times as necessary
- * to recover missed events, if any (if we update
- * OSMR0 and OSCR0 is still ahead of us, we've missed
- * the event). As we're dealing with that, re-arm the
- * compare/match for the next event.
- *
- * HACK ALERT:
- *
- * There's a latency between the instruction that
- * writes to OSMR0 and the actual commit to the
- * physical hardware, because the CPU doesn't (have
- * to) run at bus speed, there's a write buffer
- * between the CPU and the bus, etc. etc. So if the
- * target OSCR0 is "very close", to the OSMR0 load
- * value, the update to OSMR0 might not get to the
- * hardware in time and we'll miss that interrupt.
- *
- * To be safe, if the new OSMR0 is "very close" to the
- * target OSCR0 value, we call the event_handler as
- * though the event actually happened. According to
- * Nico's comment in the previous version of this
- * code, experience has shown that 6 OSCR ticks is
- * "very close" but he went with 8. We will use 16,
- * based on the results of testing on PXA270.
- *
- * To be doubly sure, we also tell clkevt via
- * clockevents_register_device() not to ask for
- * anything that might put us "very close".
- */
-#define MIN_OSCR_DELTA 16
- do {
- OSSR = OSSR_M0;
- next_match = (OSMR0 += LATCH);
- c->event_handler(c);
- } while (((signed long)(next_match - OSCR) <= MIN_OSCR_DELTA)
- && (c->mode == CLOCK_EVT_MODE_PERIODIC));
- }
+ /* Disarm the compare/match, signal the event. */
+ OIER &= ~OIER_E0;
+ OSSR = OSSR_M0;
+ c->event_handler(c);
return IRQ_HANDLED;
}
@@ -133,14 +95,6 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
unsigned long irqflags;
switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- raw_local_irq_save(irqflags);
- OSSR = OSSR_M0;
- OIER |= OIER_E0;
- OSMR0 = OSCR + LATCH;
- raw_local_irq_restore(irqflags);
- break;
-
case CLOCK_EVT_MODE_ONESHOT:
raw_local_irq_save(irqflags);
OIER &= ~OIER_E0;
@@ -158,13 +112,14 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
break;
case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
break;
}
}
static struct clock_event_device ckevt_pxa_osmr0 = {
.name = "osmr0",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .features = CLOCK_EVT_FEAT_ONESHOT,
.shift = 32,
.rating = 200,
.cpumask = CPU_MASK_CPU0,
@@ -214,7 +169,7 @@ static void __init pxa_timer_init(void)
ckevt_pxa_osmr0.max_delta_ns =
clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
ckevt_pxa_osmr0.min_delta_ns =
- clockevent_delta2ns(MIN_OSCR_DELTA, &ckevt_pxa_osmr0) + 1;
+ clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_pxa_osmr0) + 1;
cksrc_pxa_oscr0.mult =
clocksource_hz2mult(clock_tick_rate, cksrc_pxa_oscr0.shift);
@@ -226,7 +181,7 @@ static void __init pxa_timer_init(void)
}
#ifdef CONFIG_PM
-static unsigned long osmr[4], oier;
+static unsigned long osmr[4], oier, oscr;
static void pxa_timer_suspend(void)
{
@@ -235,23 +190,26 @@ static void pxa_timer_suspend(void)
osmr[2] = OSMR2;
osmr[3] = OSMR3;
oier = OIER;
+ oscr = OSCR;
}
static void pxa_timer_resume(void)
{
+ /*
+ * Ensure that we have at least MIN_OSCR_DELTA between match
+ * register 0 and the OSCR, to guarantee that we will receive
+ * the one-shot timer interrupt. We adjust OSMR0 in preference
+ * to OSCR to guarantee that OSCR is monotonically incrementing.
+ */
+ if (osmr[0] - oscr < MIN_OSCR_DELTA)
+ osmr[0] += MIN_OSCR_DELTA;
+
OSMR0 = osmr[0];
OSMR1 = osmr[1];
OSMR2 = osmr[2];
OSMR3 = osmr[3];
OIER = oier;
-
- /*
- * OSCR0 is the system timer, which has to increase
- * monotonically until it rolls over in hardware. The value
- * (OSMR0 - LATCH) is OSCR0 at the most recent system tick,
- * which is a handy value to restore to OSCR0.
- */
- OSCR = OSMR0 - LATCH;
+ OSCR = oscr;
}
#else
#define pxa_timer_suspend NULL
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 240fd042083d..9b26fa5edad6 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -29,6 +29,7 @@
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
#include <asm/arch/udc.h>
@@ -157,15 +158,10 @@ static void tosa_udc_command(int cmd)
}
}
-static int tosa_udc_is_connected(void)
-{
- return ((GPLR(TOSA_GPIO_USB_IN) & GPIO_bit(TOSA_GPIO_USB_IN)) == 0);
-}
-
-
static struct pxa2xx_udc_mach_info udc_info __initdata = {
.udc_command = tosa_udc_command,
- .udc_is_connected = tosa_udc_is_connected,
+ .gpio_vbus = TOSA_GPIO_USB_IN,
+ .gpio_vbus_inverted = 1,
};
/*
@@ -184,16 +180,13 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
- err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, IRQF_DISABLED,
+ err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC/SD card detect", data);
- if (err) {
+ if (err)
printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
- return -1;
- }
-
- set_irq_type(TOSA_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
- return 0;
+ return err;
}
static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index e4ba43bdf85d..853fc9433750 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -296,11 +296,10 @@ static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int, v
err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_RISING,
"MMC card detect", data);
- if (err) {
+ if (err)
printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
- return -1;
- }
- return 0;
+
+ return err;
}
static void trizeps4_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 743a87b2faa1..7731d50dd86c 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -25,9 +25,13 @@
#include <asm/arch/gpio.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/zylonite.h>
+#include <asm/arch/mmc.h>
#include "generic.h"
+#define MAX_SLOTS 3
+struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
+
int gpio_backlight;
int gpio_eth_irq;
@@ -43,7 +47,7 @@ static struct resource smc91x_resources[] = {
[1] = {
.start = -1, /* for run-time assignment */
.end = -1,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
@@ -156,6 +160,95 @@ static void __init zylonite_init_lcd(void)
static inline void zylonite_init_lcd(void) {}
#endif
+#if defined(CONFIG_MMC)
+static int zylonite_mci_ro(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ return gpio_get_value(zylonite_mmc_slot[pdev->id].gpio_wp);
+}
+
+static int zylonite_mci_init(struct device *dev,
+ irq_handler_t zylonite_detect_int,
+ void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ int err, cd_irq, gpio_cd, gpio_wp;
+
+ cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
+ gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
+ gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
+
+ /*
+ * setup GPIO for Zylonite MMC controller
+ */
+ err = gpio_request(gpio_cd, "mmc card detect");
+ if (err)
+ goto err_request_cd;
+ gpio_direction_input(gpio_cd);
+
+ err = gpio_request(gpio_wp, "mmc write protect");
+ if (err)
+ goto err_request_wp;
+ gpio_direction_input(gpio_wp);
+
+ err = request_irq(cd_irq, zylonite_detect_int,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: MMC/SD/SDIO: "
+ "can't request card detect IRQ\n", __func__);
+ goto err_request_irq;
+ }
+
+ return 0;
+
+err_request_irq:
+ gpio_free(gpio_wp);
+err_request_wp:
+ gpio_free(gpio_cd);
+err_request_cd:
+ return err;
+}
+
+static void zylonite_mci_exit(struct device *dev, void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ int cd_irq, gpio_cd, gpio_wp;
+
+ cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
+ gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
+ gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
+
+ free_irq(cd_irq, data);
+ gpio_free(gpio_cd);
+ gpio_free(gpio_wp);
+}
+
+static struct pxamci_platform_data zylonite_mci_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = zylonite_mci_init,
+ .exit = zylonite_mci_exit,
+ .get_ro = zylonite_mci_ro,
+};
+
+static struct pxamci_platform_data zylonite_mci2_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+};
+
+static void __init zylonite_init_mmc(void)
+{
+ pxa_set_mci_info(&zylonite_mci_platform_data);
+ pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
+ if (cpu_is_pxa310())
+ pxa3xx_set_mci3_info(&zylonite_mci_platform_data);
+}
+#else
+static inline void zylonite_init_mmc(void) {}
+#endif
+
static void __init zylonite_init(void)
{
/* board-processor specific initialization */
@@ -171,6 +264,7 @@ static void __init zylonite_init(void)
platform_device_register(&smc91x_device);
zylonite_init_lcd();
+ zylonite_init_mmc();
}
MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 1832bc316501..6ac04c09b0e9 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -53,13 +53,13 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
/* BTUART */
GPIO111_UART2_RTS,
- GPIO112_UART2_RXD,
+ GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
GPIO113_UART2_TXD,
- GPIO114_UART2_CTS,
+ GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
/* STUART */
GPIO109_UART3_TXD,
- GPIO110_UART3_RXD,
+ GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
/* AC97 */
GPIO23_AC97_nACRESET,
@@ -70,16 +70,16 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
GPIO28_AC97_SYNC,
/* Keypad */
- GPIO107_KP_DKIN_0,
- GPIO108_KP_DKIN_1,
- GPIO115_KP_MKIN_0,
- GPIO116_KP_MKIN_1,
- GPIO117_KP_MKIN_2,
- GPIO118_KP_MKIN_3,
- GPIO119_KP_MKIN_4,
- GPIO120_KP_MKIN_5,
- GPIO2_2_KP_MKIN_6,
- GPIO3_2_KP_MKIN_7,
+ GPIO107_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
+ GPIO108_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
+ GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
+ GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
+ GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
+ GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
+ GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
+ GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
+ GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
+ GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
GPIO121_KP_MKOUT_0,
GPIO122_KP_MKOUT_1,
GPIO123_KP_MKOUT_2,
@@ -88,16 +88,33 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
GPIO4_2_KP_MKOUT_5,
GPIO5_2_KP_MKOUT_6,
GPIO6_2_KP_MKOUT_7,
+
+ /* MMC1 */
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+ GPIO7_MMC1_CLK,
+ GPIO8_MMC1_CMD, /* CMD0 for slot 0 */
+ GPIO15_GPIO, /* CMD1 default as GPIO for slot 0 */
+
+ /* MMC2 */
+ GPIO9_MMC2_DAT0,
+ GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO11_MMC2_DAT2,
+ GPIO12_MMC2_DAT3,
+ GPIO13_MMC2_CLK,
+ GPIO14_MMC2_CMD,
};
static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
/* FFUART */
- GPIO30_UART1_RXD,
+ GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
GPIO31_UART1_TXD,
GPIO32_UART1_CTS,
GPIO37_UART1_RTS,
GPIO33_UART1_DCD,
- GPIO34_UART1_DSR,
+ GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
GPIO35_UART1_RI,
GPIO36_UART1_DTR,
@@ -108,7 +125,7 @@ static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
static mfp_cfg_t pxa310_mfp_cfg[] __initdata = {
/* FFUART */
- GPIO99_UART1_RXD,
+ GPIO99_UART1_RXD | MFP_LPM_EDGE_FALL,
GPIO100_UART1_TXD,
GPIO101_UART1_CTS,
GPIO106_UART1_RTS,
@@ -116,6 +133,14 @@ static mfp_cfg_t pxa310_mfp_cfg[] __initdata = {
/* Ethernet */
GPIO2_nCS3,
GPIO102_GPIO,
+
+ /* MMC3 */
+ GPIO7_2_MMC3_DAT0,
+ GPIO8_2_MMC3_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO9_2_MMC3_DAT2,
+ GPIO10_2_MMC3_DAT3,
+ GPIO103_MMC3_CLK,
+ GPIO105_MMC3_CMD,
};
#define NUM_LCD_DETECT_PINS 7
@@ -174,6 +199,10 @@ void __init zylonite_pxa300_init(void)
/* GPIO pin assignment */
gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO20);
+
+ /* MMC card detect & write protect for controller 0 */
+ zylonite_mmc_slot[0].gpio_cd = EXT_GPIO(0);
+ zylonite_mmc_slot[0].gpio_wp = EXT_GPIO(2);
}
if (cpu_is_pxa300()) {
@@ -184,5 +213,9 @@ void __init zylonite_pxa300_init(void)
if (cpu_is_pxa310()) {
pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg));
gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102);
+
+ /* MMC card detect & write protect for controller 2 */
+ zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30);
+ zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31);
}
}
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 94c715808b59..dfa79992b8ab 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -51,11 +51,11 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
GPIO17_2_LCD_BIAS,
/* FFUART */
- GPIO41_UART1_RXD,
+ GPIO41_UART1_RXD | MFP_LPM_EDGE_FALL,
GPIO42_UART1_TXD,
GPIO43_UART1_CTS,
GPIO44_UART1_DCD,
- GPIO45_UART1_DSR,
+ GPIO45_UART1_DSR | MFP_LPM_EDGE_FALL,
GPIO46_UART1_RI,
GPIO47_UART1_DTR,
GPIO48_UART1_RTS,
@@ -73,16 +73,16 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
GPIO33_I2C_SDA,
/* Keypad */
- GPIO105_KP_DKIN_0,
- GPIO106_KP_DKIN_1,
- GPIO113_KP_MKIN_0,
- GPIO114_KP_MKIN_1,
- GPIO115_KP_MKIN_2,
- GPIO116_KP_MKIN_3,
- GPIO117_KP_MKIN_4,
- GPIO118_KP_MKIN_5,
- GPIO119_KP_MKIN_6,
- GPIO120_KP_MKIN_7,
+ GPIO105_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
+ GPIO106_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
+ GPIO113_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
+ GPIO114_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
+ GPIO115_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
+ GPIO116_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
+ GPIO117_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
+ GPIO118_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
+ GPIO119_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
+ GPIO120_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
GPIO121_KP_MKOUT_0,
GPIO122_KP_MKOUT_1,
GPIO123_KP_MKOUT_2,
@@ -95,6 +95,23 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
/* Ethernet */
GPIO4_nCS3,
GPIO90_GPIO,
+
+ /* MMC1 */
+ GPIO18_MMC1_DAT0,
+ GPIO19_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO20_MMC1_DAT2,
+ GPIO21_MMC1_DAT3,
+ GPIO22_MMC1_CLK,
+ GPIO23_MMC1_CMD,/* CMD0 for slot 0 */
+ GPIO31_GPIO, /* CMD1 default as GPIO for slot 0 */
+
+ /* MMC2 */
+ GPIO24_MMC2_DAT0,
+ GPIO25_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO26_MMC2_DAT2,
+ GPIO27_MMC2_DAT3,
+ GPIO28_MMC2_CLK,
+ GPIO29_MMC2_CMD,
};
#define NUM_LCD_DETECT_PINS 7
@@ -169,5 +186,9 @@ void __init zylonite_pxa320_init(void)
/* GPIO pin assignment */
gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO14);
gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO9);
+
+ /* MMC card detect & write protect for controller 0 */
+ zylonite_mmc_slot[0].gpio_cd = mfp_to_gpio(MFP_PIN_GPIO1);
+ zylonite_mmc_slot[0].gpio_wp = mfp_to_gpio(MFP_PIN_GPIO5);
}
}
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 35156ca39df7..39b3bb7f1020 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -7,24 +7,21 @@ config MACH_REALVIEW_EB
help
Include support for the ARM(R) RealView Emulation Baseboard platform.
-config REALVIEW_MPCORE
- bool "Support MPcore tile"
+config REALVIEW_EB_ARM11MP
+ bool "Support ARM11MPCore tile"
depends on MACH_REALVIEW_EB
select CACHE_L2X0
help
- Enable support for the MPCore tile on the Realview platform.
- Since there are device address and interrupt differences, a
- kernel built with this option enabled is not compatible with
- other tiles.
+ Enable support for the ARM11MPCore tile on the Realview platform.
-config REALVIEW_MPCORE_REVB
- bool "Support MPcore RevB tile"
- depends on REALVIEW_MPCORE
+config REALVIEW_EB_ARM11MP_REVB
+ bool "Support ARM11MPCore RevB tile"
+ depends on REALVIEW_EB_ARM11MP
default n
help
- Enable support for the MPCore RevB tile on the Realview platform.
- Since there are device address differences, a
+ Enable support for the ARM11MPCore RevB tile on the Realview
+ platform. Since there are device address differences, a
kernel built with this option enabled is not compatible with
- other tiles.
+ other revisions of the ARM11MPCore tile.
endmenu
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index 36e76ba937fc..ca1e390c3c28 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -4,6 +4,5 @@
obj-y := core.o clock.o
obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o
-obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index c7f1b44da40d..98aefc9f4df3 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -25,6 +25,8 @@
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
#include <asm/system.h>
#include <asm/hardware.h>
@@ -37,7 +39,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/mach/mmc.h>
@@ -48,6 +49,9 @@
#define REALVIEW_REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)
+/* used by entry-macro.S */
+void __iomem *gic_cpu_base_addr;
+
/*
* This is the RealView sched_clock implementation. This has
* a resolution of 41.7ns, and a maximum value of about 179s.
@@ -121,26 +125,6 @@ struct platform_device realview_flash_device = {
.resource = &realview_flash_resource,
};
-static struct resource realview_smc91x_resources[] = {
- [0] = {
- .start = REALVIEW_ETH_BASE,
- .end = REALVIEW_ETH_BASE + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_ETH,
- .end = IRQ_ETH,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device realview_smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(realview_smc91x_resources),
- .resource = realview_smc91x_resources,
-};
-
static struct resource realview_i2c_resource = {
.start = REALVIEW_I2C_BASE,
.end = REALVIEW_I2C_BASE + SZ_4K - 1,
@@ -484,45 +468,64 @@ void realview_leds_event(led_event_t ledevt)
#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
#endif
-/*
- * Returns number of ms since last clock interrupt. Note that interrupts
- * will have been disabled by do_gettimeoffset()
- */
-static unsigned long realview_gettimeoffset(void)
+static void timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *clk)
{
- unsigned long ticks1, ticks2, status;
+ unsigned long ctrl;
- /*
- * Get the current number of ticks. Note that there is a race
- * condition between us reading the timer and checking for
- * an interrupt. We get around this by ensuring that the
- * counter has not reloaded between our two reads.
- */
- ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
- do {
- ticks1 = ticks2;
- status = __raw_readl(__io_address(REALVIEW_GIC_DIST_BASE + GIC_DIST_PENDING_SET)
- + ((IRQ_TIMERINT0_1 >> 5) << 2));
- ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
- } while (ticks2 > ticks1);
+ switch(mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
- /*
- * Number of ticks since last interrupt.
- */
- ticks1 = TIMER_RELOAD - ticks2;
+ ctrl = TIMER_CTRL_PERIODIC;
+ ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE;
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* period set, and timer enabled in 'next_event' hook */
+ ctrl = TIMER_CTRL_ONESHOT;
+ ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE;
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ default:
+ ctrl = 0;
+ }
- /*
- * Interrupt pending? If so, we've reloaded once already.
- *
- * FIXME: Need to check this is effectively timer 0 that expires
- */
- if (status & IRQMASK_TIMERINT0_1)
- ticks1 += TIMER_RELOAD;
+ writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
+}
- /*
- * Convert the ticks to usecs
- */
- return TICKS2USECS(ticks1);
+static int timer_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
+
+ writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
+ writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
+
+ return 0;
+}
+
+static struct clock_event_device timer0_clockevent = {
+ .name = "timer0",
+ .shift = 32,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = timer_set_mode,
+ .set_next_event = timer_set_next_event,
+ .rating = 300,
+ .cpumask = CPU_MASK_ALL,
+};
+
+static void __init realview_clockevents_init(unsigned int timer_irq)
+{
+ timer0_clockevent.irq = timer_irq;
+ timer0_clockevent.mult =
+ div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
+ timer0_clockevent.max_delta_ns =
+ clockevent_delta2ns(0xffffffff, &timer0_clockevent);
+ timer0_clockevent.min_delta_ns =
+ clockevent_delta2ns(0xf, &timer0_clockevent);
+
+ clockevents_register_device(&timer0_clockevent);
}
/*
@@ -530,19 +533,12 @@ static unsigned long realview_gettimeoffset(void)
*/
static irqreturn_t realview_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
+ struct clock_event_device *evt = &timer0_clockevent;
- // ...clear the interrupt
+ /* clear the interrupt */
writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
- timer_tick();
-
-#if defined(CONFIG_SMP) && !defined(CONFIG_LOCAL_TIMERS)
- smp_send_timer();
- update_process_times(user_mode(get_irq_regs()));
-#endif
-
- write_sequnlock(&xtime_lock);
+ evt->event_handler(evt);
return IRQ_HANDLED;
}
@@ -553,13 +549,49 @@ static struct irqaction realview_timer_irq = {
.handler = realview_timer_interrupt,
};
+static cycle_t realview_get_cycles(void)
+{
+ return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
+}
+
+static struct clocksource clocksource_realview = {
+ .name = "timer3",
+ .rating = 200,
+ .read = realview_get_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init realview_clocksource_init(void)
+{
+ /* setup timer 0 as free-running clocksource */
+ writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+ writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
+ writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
+ writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+ TIMER3_VA_BASE + TIMER_CTRL);
+
+ clocksource_realview.mult =
+ clocksource_khz2mult(1000, clocksource_realview.shift);
+ clocksource_register(&clocksource_realview);
+}
+
/*
- * Set up timer interrupt, and return the current time in seconds.
+ * Set up the clock source and clock events devices
*/
-static void __init realview_timer_init(void)
+void __init realview_timer_init(unsigned int timer_irq)
{
u32 val;
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+ /*
+ * The dummy clock device has to be registered before the main device
+ * so that the latter will broadcast the clock events
+ */
+ local_timer_setup(smp_processor_id());
+#endif
+
/*
* set clock frequency:
* REALVIEW_REFCLK is 32KHz
@@ -580,18 +612,11 @@ static void __init realview_timer_init(void)
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
writel(0, TIMER3_VA_BASE + TIMER_CTRL);
- writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
- writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE);
- writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC |
- TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL);
-
/*
* Make irqs happen for the system timer
*/
- setup_irq(IRQ_TIMERINT0_1, &realview_timer_irq);
-}
+ setup_irq(timer_irq, &realview_timer_irq);
-struct sys_timer realview_timer = {
- .init = realview_timer_init,
- .offset = realview_gettimeoffset,
-};
+ realview_clocksource_init();
+ realview_clockevents_init(timer_irq);
+}
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 2b53420f9c1b..492a14c0d604 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -27,8 +27,6 @@
#include <asm/leds.h>
#include <asm/io.h>
-extern struct sys_timer realview_timer;
-
#define AMBA_DEVICE(name,busid,base,plat) \
static struct amba_device name##_device = { \
.dev = { \
@@ -38,7 +36,7 @@ static struct amba_device name##_device = { \
}, \
.res = { \
.start = REALVIEW_##base##_BASE, \
- .end = (REALVIEW_##base##_BASE) + SZ_4K - 1,\
+ .end = (REALVIEW_##base##_BASE) + SZ_4K - 1, \
.flags = IORESOURCE_MEM, \
}, \
.dma_mask = ~0, \
@@ -46,74 +44,19 @@ static struct amba_device name##_device = { \
/* .dma = base##_DMA,*/ \
}
-/*
- * These devices are connected via the core APB bridge
- */
-#define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ }
-#define GPIO2_DMA { 0, 0 }
-#define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ }
-#define GPIO3_DMA { 0, 0 }
-
-#define AACI_IRQ { IRQ_AACI, NO_IRQ }
-#define AACI_DMA { 0x80, 0x81 }
-#define MMCI0_IRQ { IRQ_MMCI0A,IRQ_MMCI0B }
-#define MMCI0_DMA { 0x84, 0 }
-#define KMI0_IRQ { IRQ_KMI0, NO_IRQ }
-#define KMI0_DMA { 0, 0 }
-#define KMI1_IRQ { IRQ_KMI1, NO_IRQ }
-#define KMI1_DMA { 0, 0 }
-
-/*
- * These devices are connected directly to the multi-layer AHB switch
- */
-#define SMC_IRQ { NO_IRQ, NO_IRQ }
-#define SMC_DMA { 0, 0 }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_DMA { 0, 0 }
-#define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ }
-#define CLCD_DMA { 0, 0 }
-#define DMAC_IRQ { IRQ_DMAINT, NO_IRQ }
-#define DMAC_DMA { 0, 0 }
-
-/*
- * These devices are connected via the core APB bridge
- */
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define SCTL_DMA { 0, 0 }
-#define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ }
-#define WATCHDOG_DMA { 0, 0 }
-#define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ }
-#define GPIO0_DMA { 0, 0 }
-#define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ }
-#define GPIO1_DMA { 0, 0 }
-#define RTC_IRQ { IRQ_RTCINT, NO_IRQ }
-#define RTC_DMA { 0, 0 }
-
-/*
- * These devices are connected via the DMA APB bridge
- */
-#define SCI_IRQ { IRQ_SCIINT, NO_IRQ }
-#define SCI_DMA { 7, 6 }
-#define UART0_IRQ { IRQ_UARTINT0, NO_IRQ }
-#define UART0_DMA { 15, 14 }
-#define UART1_IRQ { IRQ_UARTINT1, NO_IRQ }
-#define UART1_DMA { 13, 12 }
-#define UART2_IRQ { IRQ_UARTINT2, NO_IRQ }
-#define UART2_DMA { 11, 10 }
-#define UART3_IRQ { IRQ_UART3, NO_IRQ }
-#define UART3_DMA { 0x86, 0x87 }
-#define SSP_IRQ { IRQ_SSPINT, NO_IRQ }
-#define SSP_DMA { 9, 8 }
-
-
extern struct platform_device realview_flash_device;
-extern struct platform_device realview_smc91x_device;
extern struct platform_device realview_i2c_device;
extern struct mmc_platform_data realview_mmc0_plat_data;
extern struct mmc_platform_data realview_mmc1_plat_data;
extern struct clk realview_clcd_clk;
extern struct clcd_board clcd_plat_data;
+extern void __iomem *gic_cpu_base_addr;
+#ifdef CONFIG_LOCAL_TIMERS
+extern void __iomem *twd_base_addr;
+extern unsigned int twd_size;
+#endif
extern void realview_leds_event(led_event_t ledevt);
+extern void realview_timer_init(unsigned int timer_irq);
#endif
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index c7bdf04ab094..50604360479f 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -14,19 +14,75 @@
#include <linux/device.h>
#include <linux/smp.h>
#include <linux/jiffies.h>
+#include <linux/percpu.h>
+#include <linux/clockchips.h>
+#include <linux/irq.h>
-#include <asm/mach/time.h>
#include <asm/hardware/arm_twd.h>
#include <asm/hardware/gic.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
-#define TWD_BASE(cpu) (__io_address(REALVIEW_TWD_BASE) + \
- ((cpu) * REALVIEW_TWD_SIZE))
+static DEFINE_PER_CPU(struct clock_event_device, local_clockevent);
+
+/*
+ * Used on SMP for either the local timer or IPI_TIMER
+ */
+void local_timer_interrupt(void)
+{
+ struct clock_event_device *clk = &__get_cpu_var(local_clockevent);
+
+ clk->event_handler(clk);
+}
+
+#ifdef CONFIG_LOCAL_TIMERS
+
+#define TWD_BASE(cpu) (twd_base_addr + (cpu) * twd_size)
+
+/* set up by the platform code */
+void __iomem *twd_base_addr;
+unsigned int twd_size;
static unsigned long mpcore_timer_rate;
+static void local_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *clk)
+{
+ void __iomem *base = TWD_BASE(smp_processor_id());
+ unsigned long ctrl;
+
+ switch(mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ /* timer load already set up */
+ ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
+ | TWD_TIMER_CONTROL_PERIODIC;
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* period set, and timer enabled in 'next_event' hook */
+ ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT;
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ default:
+ ctrl = 0;
+ }
+
+ __raw_writel(ctrl, base + TWD_TIMER_CONTROL);
+}
+
+static int local_timer_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ void __iomem *base = TWD_BASE(smp_processor_id());
+ unsigned long ctrl = __raw_readl(base + TWD_TIMER_CONTROL);
+
+ __raw_writel(evt, base + TWD_TIMER_COUNTER);
+ __raw_writel(ctrl | TWD_TIMER_CONTROL_ENABLE, base + TWD_TIMER_CONTROL);
+
+ return 0;
+}
+
/*
* local_timer_ack: checks for a local timer interrupt.
*
@@ -45,12 +101,11 @@ int local_timer_ack(void)
return 0;
}
-void __cpuinit local_timer_setup(unsigned int cpu)
+static void __cpuinit twd_calibrate_rate(unsigned int cpu)
{
void __iomem *base = TWD_BASE(cpu);
- unsigned int load, offset;
+ unsigned long load, count;
u64 waitjiffies;
- unsigned int count;
/*
* If this is the first time round, we need to work out how fast
@@ -88,36 +143,36 @@ void __cpuinit local_timer_setup(unsigned int cpu)
load = mpcore_timer_rate / HZ;
__raw_writel(load, base + TWD_TIMER_LOAD);
- __raw_writel(0x7, base + TWD_TIMER_CONTROL);
-
- /*
- * Now maneuver our local tick into the right part of the jiffy.
- * Start by working out where within the tick our local timer
- * interrupt should go.
- */
- offset = ((mpcore_timer_rate / HZ) / (NR_CPUS + 1)) * (cpu + 1);
-
- /*
- * gettimeoffset() will return a number of us since the last tick.
- * Convert this number of us to a local timer tick count.
- * Be careful of integer overflow whilst keeping maximum precision.
- *
- * with HZ=100 and 1MHz (fpga) ~ 1GHz processor:
- * load = 1 ~ 10,000
- * mpcore_timer_rate/10000 = 100 ~ 100,000
- *
- * so the multiply value will be less than 10^9 always.
- */
- load = (system_timer->offset() * (mpcore_timer_rate / 10000)) / 100;
-
- /* Add on our offset to get the load value */
- load = (load + offset) % (mpcore_timer_rate / HZ);
+}
- __raw_writel(load, base + TWD_TIMER_COUNTER);
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(unsigned int cpu)
+{
+ struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
+ unsigned long flags;
+
+ twd_calibrate_rate(cpu);
+
+ clk->name = "local_timer";
+ clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ clk->rating = 350;
+ clk->set_mode = local_timer_set_mode;
+ clk->set_next_event = local_timer_set_next_event;
+ clk->irq = IRQ_LOCALTIMER;
+ clk->cpumask = cpumask_of_cpu(cpu);
+ clk->shift = 20;
+ clk->mult = div_sc(mpcore_timer_rate, NSEC_PER_SEC, clk->shift);
+ clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
+ clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
/* Make sure our local interrupt controller has this enabled */
- __raw_writel(1 << IRQ_LOCALTIMER,
- __io_address(REALVIEW_GIC_DIST_BASE) + GIC_DIST_ENABLE_SET);
+ local_irq_save(flags);
+ get_irq_chip(IRQ_LOCALTIMER)->unmask(IRQ_LOCALTIMER);
+ local_irq_restore(flags);
+
+ clockevents_register_device(clk);
}
/*
@@ -127,3 +182,26 @@ void __cpuexit local_timer_stop(unsigned int cpu)
{
__raw_writel(0, TWD_BASE(cpu) + TWD_TIMER_CONTROL);
}
+
+#else /* CONFIG_LOCAL_TIMERS */
+
+static void dummy_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *clk)
+{
+}
+
+void __cpuinit local_timer_setup(unsigned int cpu)
+{
+ struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
+
+ clk->name = "dummy_timer";
+ clk->features = CLOCK_EVT_FEAT_DUMMY;
+ clk->rating = 200;
+ clk->set_mode = dummy_timer_set_mode;
+ clk->broadcast = smp_timer_broadcast;
+ clk->cpumask = cpumask_of_cpu(cpu);
+
+ clockevents_register_device(clk);
+}
+
+#endif /* !CONFIG_LOCAL_TIMERS */
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index fce3596f9950..de2b7159557d 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -18,6 +18,7 @@
#include <asm/hardware/arm_scu.h>
#include <asm/hardware.h>
#include <asm/io.h>
+#include <asm/mach-types.h>
extern void realview_secondary_startup(void);
@@ -31,9 +32,13 @@ static unsigned int __init get_core_count(void)
{
unsigned int ncores;
- ncores = __raw_readl(__io_address(REALVIEW_MPCORE_SCU_BASE) + SCU_CONFIG);
+ if (machine_is_realview_eb() && core_tile_eb11mp()) {
+ ncores = __raw_readl(__io_address(REALVIEW_EB11MP_SCU_BASE) + SCU_CONFIG);
+ ncores = (ncores & 0x03) + 1;
+ } else
+ ncores = 1;
- return (ncores & 0x03) + 1;
+ return ncores;
}
static DEFINE_SPINLOCK(boot_lock);
@@ -52,7 +57,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
- gic_cpu_init(0, __io_address(REALVIEW_GIC_CPU_BASE));
+ gic_cpu_init(0, __io_address(REALVIEW_EB11MP_GIC_CPU_BASE));
/*
* let the primary processor know we're out of the
@@ -187,10 +192,15 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
if (max_cpus > ncores)
max_cpus = ncores;
+#ifdef CONFIG_LOCAL_TIMERS
/*
- * Enable the local timer for primary CPU
+ * Enable the local timer for primary CPU. If the device is
+ * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in
+ * realview_timer_init
*/
- local_timer_setup(cpu);
+ if (machine_is_realview_eb() && core_tile_eb11mp())
+ local_timer_setup(cpu);
+#endif
/*
* Initialise the present map, which describes the set of CPUs
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index ecec2f85c4cd..60d9eb810246 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -36,7 +36,9 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/mmc.h>
+#include <asm/mach/time.h>
+#include <asm/arch/board-eb.h>
#include <asm/arch/irqs.h>
#include "core.h"
@@ -58,26 +60,7 @@ static struct map_desc realview_eb_io_desc[] __initdata = {
.pfn = __phys_to_pfn(REALVIEW_GIC_DIST_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
- },
-#ifdef CONFIG_REALVIEW_MPCORE
- {
- .virtual = IO_ADDRESS(REALVIEW_GIC1_CPU_BASE),
- .pfn = __phys_to_pfn(REALVIEW_GIC1_CPU_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE,
}, {
- .virtual = IO_ADDRESS(REALVIEW_GIC1_DIST_BASE),
- .pfn = __phys_to_pfn(REALVIEW_GIC1_DIST_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = IO_ADDRESS(REALVIEW_MPCORE_L220_BASE),
- .pfn = __phys_to_pfn(REALVIEW_MPCORE_L220_BASE),
- .length = SZ_8K,
- .type = MT_DEVICE,
- },
-#endif
- {
.virtual = IO_ADDRESS(REALVIEW_SCTL_BASE),
.pfn = __phys_to_pfn(REALVIEW_SCTL_BASE),
.length = SZ_4K,
@@ -103,11 +86,95 @@ static struct map_desc realview_eb_io_desc[] __initdata = {
#endif
};
+static struct map_desc realview_eb11mp_io_desc[] __initdata = {
+ {
+ .virtual = IO_ADDRESS(REALVIEW_EB11MP_GIC_CPU_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_EB11MP_GIC_CPU_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_EB11MP_GIC_DIST_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_EB11MP_GIC_DIST_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_EB11MP_L220_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_EB11MP_L220_BASE),
+ .length = SZ_8K,
+ .type = MT_DEVICE,
+ }
+};
+
static void __init realview_eb_map_io(void)
{
iotable_init(realview_eb_io_desc, ARRAY_SIZE(realview_eb_io_desc));
+ if (core_tile_eb11mp())
+ iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc));
}
+/*
+ * RealView EB AMBA devices
+ */
+
+/*
+ * These devices are connected via the core APB bridge
+ */
+#define GPIO2_IRQ { IRQ_EB_GPIO2, NO_IRQ }
+#define GPIO2_DMA { 0, 0 }
+#define GPIO3_IRQ { IRQ_EB_GPIO3, NO_IRQ }
+#define GPIO3_DMA { 0, 0 }
+
+#define AACI_IRQ { IRQ_EB_AACI, NO_IRQ }
+#define AACI_DMA { 0x80, 0x81 }
+#define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B }
+#define MMCI0_DMA { 0x84, 0 }
+#define KMI0_IRQ { IRQ_EB_KMI0, NO_IRQ }
+#define KMI0_DMA { 0, 0 }
+#define KMI1_IRQ { IRQ_EB_KMI1, NO_IRQ }
+#define KMI1_DMA { 0, 0 }
+
+/*
+ * These devices are connected directly to the multi-layer AHB switch
+ */
+#define SMC_IRQ { NO_IRQ, NO_IRQ }
+#define SMC_DMA { 0, 0 }
+#define MPMC_IRQ { NO_IRQ, NO_IRQ }
+#define MPMC_DMA { 0, 0 }
+#define CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ }
+#define CLCD_DMA { 0, 0 }
+#define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ }
+#define DMAC_DMA { 0, 0 }
+
+/*
+ * These devices are connected via the core APB bridge
+ */
+#define SCTL_IRQ { NO_IRQ, NO_IRQ }
+#define SCTL_DMA { 0, 0 }
+#define WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ }
+#define WATCHDOG_DMA { 0, 0 }
+#define GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ }
+#define GPIO0_DMA { 0, 0 }
+#define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ }
+#define GPIO1_DMA { 0, 0 }
+#define RTC_IRQ { IRQ_EB_RTC, NO_IRQ }
+#define RTC_DMA { 0, 0 }
+
+/*
+ * These devices are connected via the DMA APB bridge
+ */
+#define SCI_IRQ { IRQ_EB_SCI, NO_IRQ }
+#define SCI_DMA { 7, 6 }
+#define UART0_IRQ { IRQ_EB_UART0, NO_IRQ }
+#define UART0_DMA { 15, 14 }
+#define UART1_IRQ { IRQ_EB_UART1, NO_IRQ }
+#define UART1_DMA { 13, 12 }
+#define UART2_IRQ { IRQ_EB_UART2, NO_IRQ }
+#define UART2_DMA { 11, 10 }
+#define UART3_IRQ { IRQ_EB_UART3, NO_IRQ }
+#define UART3_DMA { 0x86, 0x87 }
+#define SSP_IRQ { IRQ_EB_SSP, NO_IRQ }
+#define SSP_DMA { 9, 8 }
+
/* FPGA Primecells */
AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data);
@@ -153,38 +220,127 @@ static struct amba_device *amba_devs[] __initdata = {
&kmi1_device,
};
+/*
+ * RealView EB platform devices
+ */
+
+static struct resource realview_eb_smc91x_resources[] = {
+ [0] = {
+ .start = REALVIEW_ETH_BASE,
+ .end = REALVIEW_ETH_BASE + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_EB_ETH,
+ .end = IRQ_EB_ETH,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device realview_eb_smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(realview_eb_smc91x_resources),
+ .resource = realview_eb_smc91x_resources,
+};
+
static void __init gic_init_irq(void)
{
-#ifdef CONFIG_REALVIEW_MPCORE
- unsigned int pldctrl;
- writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
- pldctrl = readl(__io_address(REALVIEW_SYS_BASE) + REALVIEW_MPCORE_SYS_PLD_CTRL1);
- pldctrl |= 0x00800000; /* New irq mode */
- writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_MPCORE_SYS_PLD_CTRL1);
- writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
+ if (core_tile_eb11mp()) {
+ unsigned int pldctrl;
+
+ /* new irq mode */
+ writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
+ pldctrl = readl(__io_address(REALVIEW_SYS_BASE) + REALVIEW_EB11MP_SYS_PLD_CTRL1);
+ pldctrl |= 0x00800000;
+ writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_EB11MP_SYS_PLD_CTRL1);
+ writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
+
+ /* core tile GIC, primary */
+ gic_cpu_base_addr = __io_address(REALVIEW_EB11MP_GIC_CPU_BASE);
+ gic_dist_init(0, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE), 29);
+ gic_cpu_init(0, gic_cpu_base_addr);
+
+#ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
+ /* board GIC, secondary */
+ gic_dist_init(1, __io_address(REALVIEW_GIC_DIST_BASE), 64);
+ gic_cpu_init(1, __io_address(REALVIEW_GIC_CPU_BASE));
+ gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1);
#endif
- gic_dist_init(0, __io_address(REALVIEW_GIC_DIST_BASE), 29);
- gic_cpu_init(0, __io_address(REALVIEW_GIC_CPU_BASE));
-#if defined(CONFIG_REALVIEW_MPCORE) && !defined(CONFIG_REALVIEW_MPCORE_REVB)
- gic_dist_init(1, __io_address(REALVIEW_GIC1_DIST_BASE), 64);
- gic_cpu_init(1, __io_address(REALVIEW_GIC1_CPU_BASE));
- gic_cascade_irq(1, IRQ_EB_IRQ1);
+ } else {
+ /* board GIC, primary */
+ gic_cpu_base_addr = __io_address(REALVIEW_GIC_CPU_BASE);
+ gic_dist_init(0, __io_address(REALVIEW_GIC_DIST_BASE), 29);
+ gic_cpu_init(0, gic_cpu_base_addr);
+ }
+}
+
+/*
+ * Fix up the IRQ numbers for the RealView EB/ARM11MPCore tile
+ */
+static void realview_eb11mp_fixup(void)
+{
+ /* AMBA devices */
+ dmac_device.irq[0] = IRQ_EB11MP_DMA;
+ uart0_device.irq[0] = IRQ_EB11MP_UART0;
+ uart1_device.irq[0] = IRQ_EB11MP_UART1;
+ uart2_device.irq[0] = IRQ_EB11MP_UART2;
+ uart3_device.irq[0] = IRQ_EB11MP_UART3;
+ clcd_device.irq[0] = IRQ_EB11MP_CLCD;
+ wdog_device.irq[0] = IRQ_EB11MP_WDOG;
+ gpio0_device.irq[0] = IRQ_EB11MP_GPIO0;
+ gpio1_device.irq[0] = IRQ_EB11MP_GPIO1;
+ gpio2_device.irq[0] = IRQ_EB11MP_GPIO2;
+ rtc_device.irq[0] = IRQ_EB11MP_RTC;
+ sci0_device.irq[0] = IRQ_EB11MP_SCI;
+ ssp0_device.irq[0] = IRQ_EB11MP_SSP;
+ aaci_device.irq[0] = IRQ_EB11MP_AACI;
+ mmc0_device.irq[0] = IRQ_EB11MP_MMCI0A;
+ mmc0_device.irq[1] = IRQ_EB11MP_MMCI0B;
+ kmi0_device.irq[0] = IRQ_EB11MP_KMI0;
+ kmi1_device.irq[0] = IRQ_EB11MP_KMI1;
+
+ /* platform devices */
+ realview_eb_smc91x_resources[1].start = IRQ_EB11MP_ETH;
+ realview_eb_smc91x_resources[1].end = IRQ_EB11MP_ETH;
+}
+
+static void __init realview_eb_timer_init(void)
+{
+ unsigned int timer_irq;
+
+ if (core_tile_eb11mp()) {
+#ifdef CONFIG_LOCAL_TIMERS
+ twd_base_addr = __io_address(REALVIEW_EB11MP_TWD_BASE);
+ twd_size = REALVIEW_EB11MP_TWD_SIZE;
#endif
+ timer_irq = IRQ_EB11MP_TIMER0_1;
+ } else
+ timer_irq = IRQ_EB_TIMER0_1;
+
+ realview_timer_init(timer_irq);
}
+static struct sys_timer realview_eb_timer = {
+ .init = realview_eb_timer_init,
+};
+
static void __init realview_eb_init(void)
{
int i;
-#ifdef CONFIG_REALVIEW_MPCORE
- /* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled
- * Bits: .... ...0 0111 1001 0000 .... .... .... */
- l2x0_init(__io_address(REALVIEW_MPCORE_L220_BASE), 0x00790000, 0xfe000fff);
-#endif
+ if (core_tile_eb11mp()) {
+ realview_eb11mp_fixup();
+
+ /* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled
+ * Bits: .... ...0 0111 1001 0000 .... .... .... */
+ l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff);
+ }
+
clk_register(&realview_clcd_clk);
platform_device_register(&realview_flash_device);
- platform_device_register(&realview_smc91x_device);
+ platform_device_register(&realview_eb_smc91x_device);
platform_device_register(&realview_i2c_device);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
@@ -204,6 +360,6 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
.boot_params = 0x00000100,
.map_io = realview_eb_map_io,
.init_irq = gic_init_irq,
- .timer = &realview_timer,
+ .timer = &realview_eb_timer,
.init_machine = realview_eb_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 587864fe25fb..66175471fff3 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -530,7 +530,7 @@ static struct s3c2410fb_mach_info __initdata bast_fb_info = {
.displays = bast_lcd_info,
.num_displays = ARRAY_SIZE(bast_lcd_info),
- .default_display = 4,
+ .default_display = 1,
};
/* Standard BAST devices */
@@ -540,7 +540,6 @@ static struct platform_device *bast_devices[] __initdata = {
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
- &s3c_device_iis,
&s3c_device_rtc,
&s3c_device_nand,
&bast_device_nor,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 9f43f3f124f5..3aade7b78fe5 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -365,7 +365,6 @@ static struct platform_device *vr1000_devices[] __initdata = {
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
- &s3c_device_iis,
&s3c_device_adc,
&serial_device,
&vr1000_nor,
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index e580303cb0ab..0e7991940f81 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -100,7 +100,7 @@ void __init s3c2410_init_clocks(int xtal)
}
struct sysdev_class s3c2410_sysclass = {
- set_kset_name("s3c2410-core"),
+ .name = "s3c2410-core",
};
static struct sys_device s3c2410_sysdev = {
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index bcd562ac1d3d..6aec86a5da56 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -60,7 +60,7 @@ usb_simtec_powercontrol(int port, int to)
static irqreturn_t
usb_simtec_ocirq(int irq, void *pw)
{
- struct s3c2410_hcd_info *info = (struct s3c2410_hcd_info *)pw;
+ struct s3c2410_hcd_info *info = pw;
if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) {
pr_debug("usb_simtec: over-current irq (oc detected)\n");
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 8e8fe48ea47f..0b43431d4b75 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -10,6 +10,7 @@ config CPU_S3C2412
select CPU_LLSERIAL_S3C2440
select S3C2412_PM if PM
select S3C2412_DMA if S3C2410_DMA
+ select S3C2410_GPIO
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index f8e011691b31..267f3348301e 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -12,8 +12,9 @@ obj- :=
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
obj-$(CONFIG_CPU_S3C2412) += irq.o
obj-$(CONFIG_CPU_S3C2412) += clock.o
+obj-$(CONFIG_CPU_S3C2412) += gpio.o
obj-$(CONFIG_S3C2412_DMA) += dma.o
-obj-$(CONFIG_S3C2412_PM) += pm.o
+obj-$(CONFIG_S3C2412_PM) += pm.o sleep.o
# Machine support
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 458993601897..2697a65ba727 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -217,7 +217,7 @@ static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
if (parent == &clk_mdivclk)
clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL;
- else if (parent == &clk_upll)
+ else if (parent == &clk_mpll)
clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL;
else
return -EINVAL;
@@ -234,6 +234,45 @@ static struct clk clk_msysclk = {
.set_parent = s3c2412_setparent_msysclk,
};
+static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
+{
+ unsigned long flags;
+ unsigned long clkdiv;
+ unsigned long dvs;
+
+ /* Note, we current equate fclk andf msysclk for S3C2412 */
+
+ if (parent == &clk_msysclk || parent == &clk_f)
+ dvs = 0;
+ else if (parent == &clk_h)
+ dvs = S3C2412_CLKDIVN_DVSEN;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ /* update this under irq lockdown, clkdivn is not protected
+ * by the clock system. */
+
+ local_irq_save(flags);
+
+ clkdiv = __raw_readl(S3C2410_CLKDIVN);
+ clkdiv &= ~S3C2412_CLKDIVN_DVSEN;
+ clkdiv |= dvs;
+ __raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static struct clk clk_armclk = {
+ .name = "armclk",
+ .id = -1,
+ .parent = &clk_msysclk,
+ .set_parent = s3c2412_setparent_armclk,
+};
+
/* these next clocks have an divider immediately after them,
* so we can register them with their divider and leave out the
* intermediate clock stage
@@ -630,11 +669,13 @@ static struct clk *clks[] __initdata = {
&clk_erefclk,
&clk_urefclk,
&clk_mrefclk,
+ &clk_armclk,
};
int __init s3c2412_baseclk_add(void)
{
unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
+ unsigned int dvs;
struct clk *clkp;
int ret;
int ptr;
@@ -643,6 +684,8 @@ int __init s3c2412_baseclk_add(void)
clk_usb_bus.parent = &clk_usbsrc;
clk_usb_bus.rate = 0x0;
+ clk_f.parent = &clk_msysclk;
+
s3c2412_clk_initparents();
for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
@@ -655,6 +698,15 @@ int __init s3c2412_baseclk_add(void)
}
}
+ /* set the dvs state according to what we got at boot time */
+
+ dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN;
+
+ if (dvs)
+ clk_armclk.parent = &clk_h;
+
+ printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off");
+
/* ensure usb bus clock is within correct rate of 48MHz */
if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) {
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 53c1d5bbce19..1dd864993566 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -30,6 +30,7 @@
#include <asm/arch/regs-mem.h>
#include <asm/arch/regs-lcd.h>
#include <asm/arch/regs-sdi.h>
+#include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
#include <asm/plat-s3c24xx/regs-iis.h>
#include <asm/plat-s3c24xx/regs-spi.h>
@@ -39,106 +40,141 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
[DMACH_XD0] = {
.name = "xdreq0",
.channels = MAP(S3C2412_DMAREQSEL_XDREQ0),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_XDREQ0),
},
[DMACH_XD1] = {
.name = "xdreq1",
.channels = MAP(S3C2412_DMAREQSEL_XDREQ1),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_XDREQ1),
},
[DMACH_SDI] = {
.name = "sdi",
.channels = MAP(S3C2412_DMAREQSEL_SDI),
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ .channels_rx = MAP(S3C2412_DMAREQSEL_SDI),
+ .hw_addr.to = S3C2410_PA_SDI + S3C2410_SDIDATA,
+ .hw_addr.from = S3C2410_PA_SDI + S3C2410_SDIDATA,
},
[DMACH_SPI0] = {
.name = "spi0",
.channels = MAP(S3C2412_DMAREQSEL_SPI0TX),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_SPI0RX),
.hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
.hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
},
[DMACH_SPI1] = {
.name = "spi1",
.channels = MAP(S3C2412_DMAREQSEL_SPI1TX),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_SPI1RX),
.hw_addr.to = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPTDAT,
.hw_addr.from = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPRDAT,
},
[DMACH_UART0] = {
.name = "uart0",
.channels = MAP(S3C2412_DMAREQSEL_UART0_0),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_0),
.hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
.hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1] = {
.name = "uart1",
.channels = MAP(S3C2412_DMAREQSEL_UART1_0),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_0),
.hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
.hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2] = {
.name = "uart2",
.channels = MAP(S3C2412_DMAREQSEL_UART2_0),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_0),
.hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
.hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_UART0_SRC2] = {
.name = "uart0",
.channels = MAP(S3C2412_DMAREQSEL_UART0_1),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_1),
.hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
.hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1_SRC2] = {
.name = "uart1",
.channels = MAP(S3C2412_DMAREQSEL_UART1_1),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_1),
.hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
.hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2_SRC2] = {
.name = "uart2",
.channels = MAP(S3C2412_DMAREQSEL_UART2_1),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_1),
.hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
.hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_TIMER] = {
.name = "timer",
.channels = MAP(S3C2412_DMAREQSEL_TIMER),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_TIMER),
},
[DMACH_I2S_IN] = {
.name = "i2s-sdi",
.channels = MAP(S3C2412_DMAREQSEL_I2SRX),
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ .channels_rx = MAP(S3C2412_DMAREQSEL_I2SRX),
+ .hw_addr.from = S3C2410_PA_IIS + S3C2412_IISRXD,
},
[DMACH_I2S_OUT] = {
.name = "i2s-sdo",
.channels = MAP(S3C2412_DMAREQSEL_I2STX),
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ .channels_rx = MAP(S3C2412_DMAREQSEL_I2STX),
+ .hw_addr.to = S3C2410_PA_IIS + S3C2412_IISTXD,
},
[DMACH_USB_EP1] = {
.name = "usb-ep1",
.channels = MAP(S3C2412_DMAREQSEL_USBEP1),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP1),
},
[DMACH_USB_EP2] = {
.name = "usb-ep2",
.channels = MAP(S3C2412_DMAREQSEL_USBEP2),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP2),
},
[DMACH_USB_EP3] = {
.name = "usb-ep3",
.channels = MAP(S3C2412_DMAREQSEL_USBEP3),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP3),
},
[DMACH_USB_EP4] = {
.name = "usb-ep4",
.channels = MAP(S3C2412_DMAREQSEL_USBEP4),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP4),
},
};
+static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan,
+ struct s3c24xx_dma_map *map,
+ enum s3c2410_dmasrc dir)
+{
+ unsigned long chsel;
+
+ if (dir == S3C2410_DMASRC_HW)
+ chsel = map->channels_rx[0];
+ else
+ chsel = map->channels[0];
+
+ chsel &= ~DMA_CH_VALID;
+ chsel |= S3C2412_DMAREQSEL_HW;
+
+ writel(chsel, chan->regs + S3C2412_DMA_DMAREQSEL);
+}
+
static void s3c2412_dma_select(struct s3c2410_dma_chan *chan,
struct s3c24xx_dma_map *map)
{
- writel(map->channels[0] | S3C2412_DMAREQSEL_HW,
- chan->regs + S3C2412_DMA_DMAREQSEL);
+ s3c2412_dma_direction(chan, map, chan->source);
}
static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = {
.select = s3c2412_dma_select,
+ .direction = s3c2412_dma_direction,
.dcon_mask = 0,
.map = s3c2412_dma_mappings,
.map_size = ARRAY_SIZE(s3c2412_dma_mappings),
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
new file mode 100644
index 000000000000..8e55c3a2eab8
--- /dev/null
+++ b/arch/arm/mach-s3c2412/gpio.c
@@ -0,0 +1,60 @@
+/* linux/arch/arm/mach-s3c2412/gpio.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/.
+ *
+ * S3C2412/S3C2413 specific GPIO support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/hardware.h>
+
+int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
+{
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
+ unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+ unsigned long flags;
+ unsigned long slpcon;
+
+ offs *= 2;
+
+ if (pin < S3C2410_GPIO_BANKB)
+ return -EINVAL;
+
+ if (pin >= S3C2410_GPIO_BANKF &&
+ pin <= S3C2410_GPIO_BANKG)
+ return -EINVAL;
+
+ if (pin > (S3C2410_GPIO_BANKH + 32))
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ slpcon = __raw_readl(base + 0x0C);
+
+ slpcon &= ~(3 << offs);
+ slpcon |= state << offs;
+
+ __raw_writel(slpcon, base + 0x0C);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index e9d0c769f5da..cc1917bf952a 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -33,6 +33,7 @@
#include <asm/arch/regs-irq.h>
#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-power.h>
#include <asm/plat-s3c24xx/cpu.h>
#include <asm/plat-s3c24xx/irq.h>
@@ -153,6 +154,22 @@ static struct irq_chip s3c2412_irq_cfsdi = {
.unmask = s3c2412_irq_cfsdi_unmask,
};
+static int s3c2412_irq_rtc_wake(unsigned int irqno, unsigned int state)
+{
+ unsigned long pwrcfg;
+
+ pwrcfg = __raw_readl(S3C2412_PWRCFG);
+ if (state)
+ pwrcfg &= ~S3C2412_PWRCFG_RTC_MASKIRQ;
+ else
+ pwrcfg |= S3C2412_PWRCFG_RTC_MASKIRQ;
+ __raw_writel(pwrcfg, S3C2412_PWRCFG);
+
+ return s3c_irq_chip.set_wake(irqno, state);
+}
+
+static struct irq_chip s3c2412_irq_rtc_chip;
+
static int s3c2412_irq_add(struct sys_device *sysdev)
{
unsigned int irqno;
@@ -173,6 +190,13 @@ static int s3c2412_irq_add(struct sys_device *sysdev)
set_irq_flags(irqno, IRQF_VALID);
}
+ /* change RTC IRQ's set wake method */
+
+ s3c2412_irq_rtc_chip = s3c_irq_chip;
+ s3c2412_irq_rtc_chip.set_wake = s3c2412_irq_rtc_wake;
+
+ set_irq_chip(IRQ_RTC, &s3c2412_irq_rtc_chip);
+
return 0;
}
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index 8988dac388a9..d4ffb2d98076 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -33,6 +33,8 @@
#include <asm/plat-s3c24xx/s3c2412.h>
+extern void s3c2412_sleep_enter(void);
+
static void s3c2412_cpu_suspend(void)
{
unsigned long tmp;
@@ -43,20 +45,7 @@ static void s3c2412_cpu_suspend(void)
tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP;
__raw_writel(tmp, S3C2412_PWRCFG);
- /* issue the standby signal into the pm unit. Note, we
- * issue a write-buffer drain just in case */
-
- tmp = 0;
-
- asm("b 1f\n\t"
- ".align 5\n\t"
- "1:\n\t"
- "mcr p15, 0, %0, c7, c10, 4\n\t"
- "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
-
- /* we should never get past here */
-
- panic("sleep resumed to originator?");
+ s3c2412_sleep_enter();
}
static void s3c2412_pm_prepare(void)
@@ -88,7 +77,6 @@ static struct sleep_save s3c2412_sleep[] = {
SAVE_ITEM(S3C2412_GPBSLPCON),
SAVE_ITEM(S3C2412_GPCSLPCON),
SAVE_ITEM(S3C2412_GPDSLPCON),
- SAVE_ITEM(S3C2412_GPESLPCON),
SAVE_ITEM(S3C2412_GPFSLPCON),
SAVE_ITEM(S3C2412_GPGSLPCON),
SAVE_ITEM(S3C2412_GPHSLPCON),
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 4f92a1562d77..abf1599c9f97 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -168,6 +168,8 @@ void __init s3c2412_init_clocks(int xtal)
fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal*2);
+ clk_mpll.rate = fclk;
+
tmp = __raw_readl(S3C2410_CLKDIVN);
/* work out clock scalings */
@@ -196,7 +198,7 @@ void __init s3c2412_init_clocks(int xtal)
*/
struct sysdev_class s3c2412_sysclass = {
- set_kset_name("s3c2412-core"),
+ .name = "s3c2412-core",
};
static int __init s3c2412_core_init(void)
diff --git a/arch/arm/mach-s3c2412/sleep.S b/arch/arm/mach-s3c2412/sleep.S
new file mode 100644
index 000000000000..db32cac4199a
--- /dev/null
+++ b/arch/arm/mach-s3c2412/sleep.S
@@ -0,0 +1,68 @@
+/* linux/arch/arm/mach-s3c2412/sleep.S
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 Power Manager low-level sleep support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hardware.h>
+#include <asm/arch/map.h>
+
+#include <asm/arch/regs-irq.h>
+
+ .text
+
+ .global s3c2412_sleep_enter
+
+s3c2412_sleep_enter:
+ mov r0, #0 /* argument for coprocessors */
+ ldr r1, =S3C2410_INTPND
+ ldr r2, =S3C2410_SRCPND
+ ldr r3, =S3C2410_EINTPEND
+
+ teq r0, r0
+ bl s3c2412_sleep_enter1
+ teq pc, r0
+ bl s3c2412_sleep_enter1
+
+ .align 5
+
+ /* this is called twice, first with the Z flag to ensure that the
+ * instructions have been loaded into the cache, and the second
+ * time to try and suspend the system.
+ */
+s3c2412_sleep_enter1:
+ mcr p15, 0, r0, c7, c10, 4
+ mcrne p15, 0, r0, c7, c0, 4
+
+ /* if we return from here, it is because an interrupt was
+ * active when we tried to shutdown. Try and ack the IRQ and
+ * retry, as simply returning causes the system to lock.
+ */
+
+ ldrne r9, [ r1 ]
+ strne r9, [ r1 ]
+ ldrne r9, [ r2 ]
+ strne r9, [ r2 ]
+ ldrne r9, [ r3 ]
+ strne r9, [ r3 ]
+ bne s3c2412_sleep_enter1
+
+ mov pc, r14
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index 79e2ea4adaf3..184d804934c9 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -111,14 +111,9 @@ static struct clk s3c2440_clk_ac97 = {
static int s3c2440_clk_add(struct sys_device *sysdev)
{
- unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
- unsigned long clkdivn;
+ struct clk *clock_upll;
struct clk *clock_h;
struct clk *clock_p;
- struct clk *clock_upll;
-
- printk("S3C2440: Clock Support, DVS %s\n",
- (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
clock_p = clk_get(NULL, "pclk");
clock_h = clk_get(NULL, "hclk");
@@ -129,21 +124,6 @@ static int s3c2440_clk_add(struct sys_device *sysdev)
return -EINVAL;
}
- /* check rate of UPLL, and if it is near 96MHz, then change
- * to using half the UPLL rate for the system */
-
- if (clk_get_rate(clock_upll) > (94 * MHZ)) {
- clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
- mutex_lock(&clocks_mutex);
-
- clkdivn = __raw_readl(S3C2410_CLKDIVN);
- clkdivn |= S3C2440_CLKDIVN_UCLK;
- __raw_writel(clkdivn, S3C2410_CLKDIVN);
-
- mutex_unlock(&clocks_mutex);
- }
-
s3c2440_clk_cam.parent = clock_h;
s3c2440_clk_ac97.parent = clock_p;
s3c2440_clk_cam_upll.parent = clock_upll;
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index c326983f4a8f..78af7664988b 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -312,7 +312,7 @@ static int osiris_pm_resume(struct sys_device *sd)
#endif
static struct sysdev_class osiris_pm_sysclass = {
- set_kset_name("mach-osiris"),
+ .name = "mach-osiris",
.suspend = osiris_pm_suspend,
.resume = osiris_pm_resume,
};
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c
index 5b9e830ac4d3..2d030d439fe9 100644
--- a/arch/arm/mach-s3c2442/clock.c
+++ b/arch/arm/mach-s3c2442/clock.c
@@ -115,14 +115,9 @@ static struct clk s3c2442_clk_cam_upll = {
static int s3c2442_clk_add(struct sys_device *sysdev)
{
- unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
- unsigned long clkdivn;
+ struct clk *clock_upll;
struct clk *clock_h;
struct clk *clock_p;
- struct clk *clock_upll;
-
- printk("S3C2442: Clock Support, DVS %s\n",
- (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
clock_p = clk_get(NULL, "pclk");
clock_h = clk_get(NULL, "hclk");
@@ -133,21 +128,6 @@ static int s3c2442_clk_add(struct sys_device *sysdev)
return -EINVAL;
}
- /* check rate of UPLL, and if it is near 96MHz, then change
- * to using half the UPLL rate for the system */
-
- if (clk_get_rate(clock_upll) > (94 * MHZ)) {
- clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
- mutex_lock(&clocks_mutex);
-
- clkdivn = __raw_readl(S3C2410_CLKDIVN);
- clkdivn |= S3C2440_CLKDIVN_UCLK;
- __raw_writel(clkdivn, S3C2410_CLKDIVN);
-
- mutex_unlock(&clocks_mutex);
- }
-
s3c2442_clk_cam.parent = clock_h;
s3c2442_clk_cam_upll.parent = clock_upll;
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index 8d8117158d23..9ce490560af9 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -43,7 +43,7 @@ static struct map_desc s3c2443_iodesc[] __initdata = {
};
struct sysdev_class s3c2443_sysclass = {
- set_kset_name("s3c2443-core"),
+ .name = "s3c2443-core",
};
static struct sys_device s3c2443_sysdev = {
diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
index 1e25b1d19fce..94620be7bfac 100644
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ b/arch/arm/mach-sa1100/collie_pm.c
@@ -165,7 +165,7 @@ int collie_read_temp(void)
ucb1x00_adc_enable(ucb);
ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0);
- /* >1010 = battery removed, 460 = 22C ?, higer = lower temp ? */
+ /* >1010 = battery removed, 460 = 22C ?, higher = lower temp ? */
voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD0, UCB_SYNC);
ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON);
ucb1x00_adc_disable(ucb);
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 9e13c8358ea7..5c84c604ed86 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -470,7 +470,7 @@ void __init sa1110_mb_disable(void)
* If the system is going to use the SA-1111 DMA engines, set up
* the memory bus request/grant pins.
*/
-void __init sa1110_mb_enable(void)
+void __devinit sa1110_mb_enable(void)
{
unsigned long flags;
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index edf3347d9c5b..3dc17d7bf38e 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -283,7 +283,7 @@ static int sa1100irq_resume(struct sys_device *dev)
}
static struct sysdev_class sa1100irq_sysclass = {
- set_kset_name("sa11x0-irq"),
+ .name = "sa11x0-irq",
.suspend = sa1100irq_suspend,
.resume = sa1100irq_resume,
};
diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c
index 59703c6fb29b..06206ceb312e 100644
--- a/arch/arm/mach-sa1100/ssp.c
+++ b/arch/arm/mach-sa1100/ssp.c
@@ -29,9 +29,8 @@ static irqreturn_t ssp_interrupt(int irq, void *dev_id)
{
unsigned int status = Ser4SSSR;
- if (status & SSSR_ROR) {
+ if (status & SSSR_ROR)
printk(KERN_WARNING "SSP: receiver overrun\n");
- }
Ser4SSSR = SSSR_ROR;
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index fdf7b016e7ad..c2677368d6af 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -14,6 +14,7 @@
#include <linux/irq.h>
#include <linux/timex.h>
#include <linux/signal.h>
+#include <linux/clocksource.h>
#include <asm/mach/time.h>
#include <asm/hardware.h>
@@ -35,23 +36,6 @@ static int sa1100_set_rtc(void)
return 0;
}
-/* IRQs are disabled before entering here from do_gettimeofday() */
-static unsigned long sa1100_gettimeoffset (void)
-{
- unsigned long ticks_to_match, elapsed, usec;
-
- /* Get ticks before next timer match */
- ticks_to_match = OSMR0 - OSCR;
-
- /* We need elapsed ticks since last match */
- elapsed = LATCH - ticks_to_match;
-
- /* Now convert them to usec */
- usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH;
-
- return usec;
-}
-
#ifdef CONFIG_NO_IDLE_HZ
static unsigned long initial_match;
static int match_posponed;
@@ -62,8 +46,6 @@ sa1100_timer_interrupt(int irq, void *dev_id)
{
unsigned int next_match;
- write_seqlock(&xtime_lock);
-
#ifdef CONFIG_NO_IDLE_HZ
if (match_posponed) {
match_posponed = 0;
@@ -85,8 +67,6 @@ sa1100_timer_interrupt(int irq, void *dev_id)
next_match = (OSMR0 += LATCH);
} while ((signed long)(next_match - OSCR) <= 0);
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
@@ -96,6 +76,20 @@ static struct irqaction sa1100_timer_irq = {
.handler = sa1100_timer_interrupt,
};
+static cycle_t sa1100_read_oscr(void)
+{
+ return OSCR;
+}
+
+static struct clocksource cksrc_sa1100_oscr = {
+ .name = "oscr",
+ .rating = 200,
+ .read = sa1100_read_oscr,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
static void __init sa1100_timer_init(void)
{
unsigned long flags;
@@ -109,6 +103,11 @@ static void __init sa1100_timer_init(void)
OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */
OSMR0 = OSCR + LATCH; /* set initial match */
local_irq_restore(flags);
+
+ cksrc_sa1100_oscr.mult =
+ clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_sa1100_oscr.shift);
+
+ clocksource_register(&cksrc_sa1100_oscr);
}
#ifdef CONFIG_NO_IDLE_HZ
@@ -182,7 +181,6 @@ struct sys_timer sa1100_timer = {
.init = sa1100_timer_init,
.suspend = sa1100_timer_suspend,
.resume = sa1100_timer_resume,
- .offset = sa1100_gettimeoffset,
#ifdef CONFIG_NO_IDLE_HZ
.dyn_tick = &sa1100_dyn_tick,
#endif
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index a0545db2a34f..09d9f33d4072 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -82,9 +82,7 @@ static void __init shark_map_io(void)
static irqreturn_t
shark_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
timer_tick();
- write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 7868f4dc1d00..76348f060f27 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -171,8 +171,8 @@ config CPU_ARM925T
# ARM926T
config CPU_ARM926T
bool "Support ARM926T processor"
- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI
- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI
+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
@@ -342,11 +342,33 @@ config CPU_XSC3
select CPU_TLB_V4WBI if MMU
select IO_36
+# Feroceon
+config CPU_FEROCEON
+ bool
+ depends on ARCH_ORION
+ default y
+ select CPU_32v5
+ select CPU_ABRT_EV5T
+ select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
+ select CPU_COPY_V4WB if MMU
+ select CPU_TLB_V4WBI if MMU
+
+config CPU_FEROCEON_OLD_ID
+ bool "Accept early Feroceon cores with an ARM926 ID"
+ depends on CPU_FEROCEON && !CPU_ARM926T
+ default y
+ help
+ This enables the usage of some old Feroceon cores
+ for which the CPU ID is equal to the ARM926 ID.
+ Relevant for Feroceon-1850 and early Feroceon-2850.
+
# ARMv6
config CPU_V6
bool "Support ARM V6 processor"
- depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3
+ depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A
default y if ARCH_MX3
+ default y if ARCH_MSM7X00A
select CPU_32v6
select CPU_ABRT_EV6
select CPU_CACHE_V6
@@ -538,7 +560,7 @@ comment "Processor Features"
config ARM_THUMB
bool "Support Thumb user binaries"
- depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 || CPU_V7
+ depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 || CPU_V7 || CPU_FEROCEON
default y
help
Say Y if you want to include kernel support for running user space
@@ -600,7 +622,7 @@ config CPU_DCACHE_SIZE
config CPU_DCACHE_WRITETHROUGH
bool "Force write through D-cache"
- depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020) && !CPU_DCACHE_DISABLE
+ depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FEROCEON) && !CPU_DCACHE_DISABLE
default y if CPU_ARM925T
help
Say Y here to use the data cache in writethrough mode. Unless you
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 762702765fc3..44536a0b995a 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -68,6 +68,7 @@ obj-$(CONFIG_CPU_SA110) += proc-sa110.o
obj-$(CONFIG_CPU_SA1100) += proc-sa1100.o
obj-$(CONFIG_CPU_XSCALE) += proc-xscale.o
obj-$(CONFIG_CPU_XSC3) += proc-xsc3.o
+obj-$(CONFIG_CPU_FEROCEON) += proc-feroceon.o
obj-$(CONFIG_CPU_V6) += proc-v6.o
obj-$(CONFIG_CPU_V7) += proc-v7.o
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index a8a7dab757eb..28ad7ab1c0cd 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -12,6 +12,7 @@
#include <linux/signal.h>
#include <linux/mm.h>
#include <linux/init.h>
+#include <linux/kprobes.h>
#include <asm/system.h>
#include <asm/pgtable.h>
@@ -20,6 +21,29 @@
#include "fault.h"
+
+#ifdef CONFIG_KPROBES
+static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr)
+{
+ int ret = 0;
+
+ if (!user_mode(regs)) {
+ /* kprobe_running() needs smp_processor_id() */
+ preempt_disable();
+ if (kprobe_running() && kprobe_fault_handler(regs, fsr))
+ ret = 1;
+ preempt_enable();
+ }
+
+ return ret;
+}
+#else
+static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr)
+{
+ return 0;
+}
+#endif
+
/*
* This is useful to dump out the page tables associated with
* 'addr' in mm 'mm'.
@@ -215,13 +239,16 @@ out:
return fault;
}
-static int
+static int __kprobes
do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
{
struct task_struct *tsk;
struct mm_struct *mm;
int fault, sig, code;
+ if (notify_page_fault(regs, fsr))
+ return 0;
+
tsk = current;
mm = tsk->mm;
@@ -311,7 +338,7 @@ no_context:
* interrupt or a critical region, and should only copy the information
* from the master page table, nothing more.
*/
-static int
+static int __kprobes
do_translation_fault(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 75952779ce19..303a7ff6bfd2 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -162,7 +162,7 @@ static void unmap_area_sections(unsigned long virt, unsigned long size)
* Free the page table, if there was one.
*/
if ((pmd_val(pmd) & PMD_TYPE_MASK) == PMD_TYPE_TABLE)
- pte_free_kernel(pmd_page_vaddr(pmd));
+ pte_free_kernel(&init_mm, pmd_page_vaddr(pmd));
}
addr += PGDIR_SIZE;
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
index 50b9aed6000d..500c9610ab30 100644
--- a/arch/arm/mm/pgd.c
+++ b/arch/arm/mm/pgd.c
@@ -65,14 +65,14 @@ pgd_t *get_pgd_slow(struct mm_struct *mm)
return new_pgd;
no_pte:
- pmd_free(new_pmd);
+ pmd_free(mm, new_pmd);
no_pmd:
free_pages((unsigned long)new_pgd, 2);
no_pgd:
return NULL;
}
-void free_pgd_slow(pgd_t *pgd)
+void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd)
{
pmd_t *pmd;
struct page *pte;
@@ -94,8 +94,8 @@ void free_pgd_slow(pgd_t *pgd)
pmd_clear(pmd);
dec_zone_page_state(virt_to_page((unsigned long *)pgd), NR_PAGETABLE);
pte_lock_deinit(pte);
- pte_free(pte);
- pmd_free(pmd);
+ pte_free(mm, pte);
+ pmd_free(mm, pmd);
free:
free_pages((unsigned long) pgd, 2);
}
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
new file mode 100644
index 000000000000..fa0dc7e6f0ea
--- /dev/null
+++ b/arch/arm/mm/proc-feroceon.S
@@ -0,0 +1,506 @@
+/*
+ * linux/arch/arm/mm/proc-feroceon.S: MMU functions for Feroceon
+ *
+ * Heavily based on proc-arm926.S
+ * Maintainer: Assaf Hoffman <hoffman@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/elf.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include "proc-macros.S"
+
+/*
+ * This is the maximum size of an area which will be invalidated
+ * using the single invalidate entry instructions. Anything larger
+ * than this, and we go for the whole cache.
+ *
+ * This value should be chosen such that we choose the cheapest
+ * alternative.
+ */
+#define CACHE_DLIMIT 16384
+
+/*
+ * the cache line size of the I and D cache
+ */
+#define CACHE_DLINESIZE 32
+
+ .text
+/*
+ * cpu_feroceon_proc_init()
+ */
+ENTRY(cpu_feroceon_proc_init)
+ mov pc, lr
+
+/*
+ * cpu_feroceon_proc_fin()
+ */
+ENTRY(cpu_feroceon_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+ bl feroceon_flush_kern_cache_all
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x000e @ ............wca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_feroceon_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+ .align 5
+ENTRY(cpu_feroceon_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+#ifdef CONFIG_MMU
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x000f @ ............wcam
+ bic ip, ip, #0x1100 @ ...i...s........
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ mov pc, r0
+
+/*
+ * cpu_feroceon_do_idle()
+ *
+ * Called with IRQs disabled
+ */
+ .align 10
+ENTRY(cpu_feroceon_do_idle)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer
+ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
+ mov pc, lr
+
+/*
+ * flush_user_cache_all()
+ *
+ * Clean and invalidate all cache entries in a particular
+ * address space.
+ */
+ENTRY(feroceon_flush_user_cache_all)
+ /* FALLTHROUGH */
+
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(feroceon_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ mov ip, #0
+__flush_whole_cache:
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
+#else
+1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate
+ bne 1b
+#endif
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Clean and invalidate a range of cache entries in the
+ * specified address range.
+ *
+ * - start - start address (inclusive)
+ * - end - end address (exclusive)
+ * - flags - vm_flags describing address space
+ */
+ENTRY(feroceon_flush_user_cache_range)
+ mov ip, #0
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #CACHE_DLIMIT
+ bgt __flush_whole_cache
+1: tst r2, #VM_EXEC
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+#else
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+#endif
+ cmp r0, r1
+ blo 1b
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(feroceon_coherent_kern_range)
+ /* FALLTHROUGH */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(feroceon_coherent_user_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - addr - page aligned address
+ */
+ENTRY(feroceon_flush_kern_dcache_page)
+ add r1, r0, #PAGE_SZ
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(feroceon_dma_inv_range)
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ tst r0, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ tst r1, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+#endif
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(feroceon_dma_clean_range)
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(feroceon_dma_flush_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1:
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+#else
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#endif
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ENTRY(feroceon_cache_fns)
+ .long feroceon_flush_kern_cache_all
+ .long feroceon_flush_user_cache_all
+ .long feroceon_flush_user_cache_range
+ .long feroceon_coherent_kern_range
+ .long feroceon_coherent_user_range
+ .long feroceon_flush_kern_dcache_page
+ .long feroceon_dma_inv_range
+ .long feroceon_dma_clean_range
+ .long feroceon_dma_flush_range
+
+ENTRY(cpu_feroceon_dcache_clean_area)
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ subs r1, r1, #CACHE_DLINESIZE
+ bhi 1b
+#endif
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_feroceon_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_feroceon_switch_mm)
+#ifdef CONFIG_MMU
+ mov ip, #0
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
+#else
+@ && 'Clean & Invalidate whole DCache'
+1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate
+ bne 1b
+#endif
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
+ mov pc, lr
+
+/*
+ * cpu_feroceon_set_pte_ext(ptep, pte, ext)
+ *
+ * Set a PTE and flush it out
+ */
+ .align 5
+ENTRY(cpu_feroceon_set_pte_ext)
+#ifdef CONFIG_MMU
+ str r1, [r0], #-2048 @ linux version
+
+ eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+ bic r2, r1, #PTE_SMALL_AP_MASK
+ bic r2, r2, #PTE_TYPE_MASK
+ orr r2, r2, #PTE_TYPE_SMALL
+
+ tst r1, #L_PTE_USER @ User?
+ orrne r2, r2, #PTE_SMALL_AP_URO_SRW
+
+ tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
+ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+ tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
+ movne r2, #0
+
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ eor r3, r2, #0x0a @ C & small page?
+ tst r3, #0x0b
+ biceq r2, r2, #4
+#endif
+ str r2, [r0] @ hardware version
+ mov r0, r0
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#endif
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+#endif
+ mov pc, lr
+
+ __INIT
+
+ .type __feroceon_setup, #function
+__feroceon_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+#ifdef CONFIG_MMU
+ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+#endif
+
+
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mov r0, #4 @ disable write-back on caches explicitly
+ mcr p15, 7, r0, c15, c0, 0
+#endif
+
+ adr r5, feroceon_crval
+ ldmia r5, {r5, r6}
+ mrc p15, 0, r0, c1, c0 @ get control register v4
+ bic r0, r0, r5
+ orr r0, r0, r6
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+ orr r0, r0, #0x4000 @ .1.. .... .... ....
+#endif
+ mov pc, lr
+ .size __feroceon_setup, . - __feroceon_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * .011 0001 ..11 0101
+ *
+ */
+ .type feroceon_crval, #object
+feroceon_crval:
+ crval clear=0x00007f3f, mmuset=0x00003135, ucset=0x00001134
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type feroceon_processor_functions, #object
+feroceon_processor_functions:
+ .word v5t_early_abort
+ .word cpu_feroceon_proc_init
+ .word cpu_feroceon_proc_fin
+ .word cpu_feroceon_reset
+ .word cpu_feroceon_do_idle
+ .word cpu_feroceon_dcache_clean_area
+ .word cpu_feroceon_switch_mm
+ .word cpu_feroceon_set_pte_ext
+ .size feroceon_processor_functions, . - feroceon_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv5te"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v5"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_feroceon_name, #object
+cpu_feroceon_name:
+ .asciz "Feroceon"
+ .size cpu_feroceon_name, . - cpu_feroceon_name
+
+ .align
+
+ .section ".proc.info.init", #alloc, #execinstr
+
+#ifdef CONFIG_CPU_FEROCEON_OLD_ID
+ .type __feroceon_old_id_proc_info,#object
+__feroceon_old_id_proc_info:
+ .long 0x41069260
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __feroceon_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_feroceon_name
+ .long feroceon_processor_functions
+ .long v4wbi_tlb_fns
+ .long v4wb_user_fns
+ .long feroceon_cache_fns
+ .size __feroceon_old_id_proc_info, . - __feroceon_old_id_proc_info
+#endif
+
+ .type __feroceon_proc_info,#object
+__feroceon_proc_info:
+ .long 0x56055310
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __feroceon_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_feroceon_name
+ .long feroceon_processor_functions
+ .long v4wbi_tlb_fns
+ .long v4wb_user_fns
+ .long feroceon_cache_fns
+ .size __feroceon_proc_info, . - __feroceon_proc_info
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index a9de727c9327..0a5cf3a6438b 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -96,7 +96,7 @@ static int op_arm_resume(struct sys_device *dev)
}
static struct sysdev_class oprofile_sysclass = {
- set_kset_name("oprofile"),
+ .name = "oprofile",
.resume = op_arm_resume,
.suspend = op_arm_suspend,
};
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index ba3d21d8fba3..6fe481ff4fdf 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -57,8 +57,6 @@ unsigned long iop_gettimeoffset(void)
static irqreturn_t
iop_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
write_tisr(1);
while ((signed long)(next_jiffy_time - read_tcr1())
@@ -67,8 +65,6 @@ iop_timer_interrupt(int irq, void *dev_id)
next_jiffy_time -= ticks_per_jiffy;
}
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index 83a5f8b91857..f455233af082 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -29,7 +29,7 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 6097753394ad..b2a87b8ef673 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1455,7 +1455,7 @@ static int omap_gpio_resume(struct sys_device *dev)
}
static struct sysdev_class omap_gpio_sysclass = {
- set_kset_name("gpio"),
+ .name = "gpio",
.suspend = omap_gpio_suspend,
.resume = omap_gpio_resume,
};
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 0360b1f14d11..1945ddfec18d 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -116,8 +116,8 @@ static void mbox_tx_work(struct work_struct *work)
}
spin_lock(q->queue_lock);
- blkdev_dequeue_request(rq);
- end_that_request_last(rq, 0);
+ if (__blk_end_request(rq, 0, 0))
+ BUG();
spin_unlock(q->queue_lock);
}
}
@@ -149,10 +149,8 @@ static void mbox_rx_work(struct work_struct *work)
msg = (mbox_msg_t) rq->data;
- spin_lock_irqsave(q->queue_lock, flags);
- blkdev_dequeue_request(rq);
- end_that_request_last(rq, 0);
- spin_unlock_irqrestore(q->queue_lock, flags);
+ if (blk_end_request(rq, 0, 0))
+ BUG();
mbox->rxq->callback((void *)msg);
}
@@ -212,7 +210,7 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
static irqreturn_t mbox_interrupt(int irq, void *p)
{
- struct omap_mbox *mbox = (struct omap_mbox *)p;
+ struct omap_mbox *mbox = p;
if (is_mbox_irq(mbox, IRQ_TX))
__mbox_tx_interrupt(mbox);
@@ -263,10 +261,8 @@ omap_mbox_read(struct device *dev, struct device_attribute *attr, char *buf)
*p = (mbox_msg_t) rq->data;
- spin_lock_irqsave(q->queue_lock, flags);
- blkdev_dequeue_request(rq);
- end_that_request_last(rq, 0);
- spin_unlock_irqrestore(q->queue_lock, flags);
+ if (blk_end_request(rq, 0, 0))
+ BUG();
if (unlikely(mbox_seq_test(mbox, *p))) {
pr_info("mbox: Illegal seq bit!(%08x) ignored\n", *p);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index f7b9ccdaacbc..2af5bd5a1344 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -98,9 +98,10 @@ static void omap_mcbsp_dump_reg(u8 id)
static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
{
- struct omap_mcbsp * mcbsp_tx = (struct omap_mcbsp *)(dev_id);
+ struct omap_mcbsp *mcbsp_tx = dev_id;
- DBG("TX IRQ callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
+ DBG("TX IRQ callback : 0x%x\n",
+ OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
complete(&mcbsp_tx->tx_irq_completion);
return IRQ_HANDLED;
@@ -108,9 +109,10 @@ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
{
- struct omap_mcbsp * mcbsp_rx = (struct omap_mcbsp *)(dev_id);
+ struct omap_mcbsp *mcbsp_rx = dev_id;
- DBG("RX IRQ callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
+ DBG("RX IRQ callback : 0x%x\n",
+ OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
complete(&mcbsp_rx->rx_irq_completion);
return IRQ_HANDLED;
@@ -118,9 +120,10 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data)
{
- struct omap_mcbsp * mcbsp_dma_tx = (struct omap_mcbsp *)(data);
+ struct omap_mcbsp *mcbsp_dma_tx = data;
- DBG("TX DMA callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2));
+ DBG("TX DMA callback : 0x%x\n",
+ OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2));
/* We can free the channels */
omap_free_dma(mcbsp_dma_tx->dma_tx_lch);
@@ -131,9 +134,10 @@ static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data)
static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data)
{
- struct omap_mcbsp * mcbsp_dma_rx = (struct omap_mcbsp *)(data);
+ struct omap_mcbsp *mcbsp_dma_rx = data;
- DBG("RX DMA callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2));
+ DBG("RX DMA callback : 0x%x\n",
+ OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2));
/* We can free the channels */
omap_free_dma(mcbsp_dma_rx->dma_rx_lch);
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 8e5ccaa1f03c..131d20237dd7 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -23,6 +23,7 @@ obj-y += clock.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += sleep.o
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index 79cda0faec86..99a44746f8f2 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -172,6 +172,15 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
if (IS_ERR(clk))
return -EINVAL;
+ /* We do not default just do a clk->rate = rate as
+ * the clock may have been made this way by choice.
+ */
+
+ WARN_ON(clk->set_rate == NULL);
+
+ if (clk->set_rate == NULL)
+ return -EINVAL;
+
mutex_lock(&clocks_mutex);
ret = (clk->set_rate)(clk, rate);
mutex_unlock(&clocks_mutex);
@@ -213,6 +222,12 @@ EXPORT_SYMBOL(clk_set_parent);
/* base clocks */
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+ clk->rate = rate;
+ return 0;
+}
+
struct clk clk_xtal = {
.name = "xtal",
.id = -1,
@@ -224,6 +239,7 @@ struct clk clk_xtal = {
struct clk clk_mpll = {
.name = "mpll",
.id = -1,
+ .set_rate = clk_default_setrate,
};
struct clk clk_upll = {
@@ -239,6 +255,7 @@ struct clk clk_f = {
.rate = 0,
.parent = &clk_mpll,
.ctrlbit = 0,
+ .set_rate = clk_default_setrate,
};
struct clk clk_h = {
@@ -247,6 +264,7 @@ struct clk clk_h = {
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
+ .set_rate = clk_default_setrate,
};
struct clk clk_p = {
@@ -255,6 +273,7 @@ struct clk clk_p = {
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
+ .set_rate = clk_default_setrate,
};
struct clk clk_usb_bus = {
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 29696e46ed65..ac9ff1666fcc 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -525,7 +525,8 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
}
} else if (chan->state == S3C2410_DMA_IDLE) {
if (chan->flags & S3C2410_DMAF_AUTOSTART) {
- s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_START);
+ s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
+ S3C2410_DMAOP_START);
}
}
@@ -787,7 +788,7 @@ int s3c2410_dma_request(unsigned int channel,
pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan);
- return 0;
+ return chan->number | DMACH_LOW_LEVEL;
}
EXPORT_SYMBOL(s3c2410_dma_request);
@@ -1173,6 +1174,7 @@ int s3c2410_dma_devconfig(int channel,
chan->source = source;
chan->dev_addr = devaddr;
+ chan->hw_cfg = hwcfg;
switch (source) {
case S3C2410_DMASRC_HW:
@@ -1184,7 +1186,7 @@ int s3c2410_dma_devconfig(int channel,
dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
- return 0;
+ break;
case S3C2410_DMASRC_MEM:
/* source is memory */
@@ -1195,11 +1197,19 @@ int s3c2410_dma_devconfig(int channel,
dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC);
- return 0;
+ break;
+
+ default:
+ printk(KERN_ERR "dma%d: invalid source type (%d)\n",
+ channel, source);
+
+ return -EINVAL;
}
- printk(KERN_ERR "dma%d: invalid source type (%d)\n", channel, source);
- return -EINVAL;
+ if (dma_sel.direction != NULL)
+ (dma_sel.direction)(chan, chan->map, source);
+
+ return 0;
}
EXPORT_SYMBOL(s3c2410_dma_devconfig);
@@ -1227,6 +1237,10 @@ int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst)
EXPORT_SYMBOL(s3c2410_dma_getposition);
+static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
+{
+ return container_of(dev, struct s3c2410_dma_chan, dev);
+}
/* system device class */
@@ -1234,7 +1248,7 @@ EXPORT_SYMBOL(s3c2410_dma_getposition);
static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
{
- struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev);
+ struct s3c2410_dma_chan *cp = to_dma_chan(dev);
printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
@@ -1256,6 +1270,24 @@ static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
static int s3c2410_dma_resume(struct sys_device *dev)
{
+ struct s3c2410_dma_chan *cp = to_dma_chan(dev);
+ unsigned int no = cp->number | DMACH_LOW_LEVEL;
+
+ /* restore channel's hardware configuration */
+
+ if (!cp->in_use)
+ return 0;
+
+ printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
+
+ s3c2410_dma_config(no, cp->xfer_unit, cp->dcon);
+ s3c2410_dma_devconfig(no, cp->source, cp->hw_cfg, cp->dev_addr);
+
+ /* re-select the dma source for this channel */
+
+ if (cp->map != NULL)
+ dma_sel.select(cp, cp->map);
+
return 0;
}
@@ -1265,7 +1297,7 @@ static int s3c2410_dma_resume(struct sys_device *dev)
#endif /* CONFIG_PM */
struct sysdev_class dma_sysclass = {
- set_kset_name("s3c24xx-dma"),
+ .name = "s3c24xx-dma",
.suspend = s3c2410_dma_suspend,
.resume = s3c2410_dma_resume,
};
@@ -1445,6 +1477,7 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
found:
dmach = &s3c2410_chans[ch];
+ dmach->map = ch_map;
dma_chan_map[channel] = dmach;
/* select the channel */
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index ec3a09c4d181..ee99dcc7f0bd 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -122,6 +122,19 @@ void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
EXPORT_SYMBOL(s3c2410_gpio_pullup);
+int s3c2410_gpio_getpull(unsigned int pin)
+{
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
+ unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+
+ if (pin < S3C2410_GPIO_BANKB)
+ return -EINVAL;
+
+ return (__raw_readl(base + 0x08) & (1L << offs)) ? 1 : 0;
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_getpull);
+
void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
{
void __iomem *base = S3C24XX_GPIO_BASE(pin);
@@ -186,3 +199,19 @@ int s3c2410_gpio_getirq(unsigned int pin)
}
EXPORT_SYMBOL(s3c2410_gpio_getirq);
+
+int s3c2410_gpio_irq2pin(unsigned int irq)
+{
+ if (irq >= IRQ_EINT0 && irq <= IRQ_EINT3)
+ return S3C2410_GPF0 + (irq - IRQ_EINT0);
+
+ if (irq >= IRQ_EINT4 && irq <= IRQ_EINT7)
+ return S3C2410_GPF4 + (irq - IRQ_EINT4);
+
+ if (irq >= IRQ_EINT8 && irq <= IRQ_EINT23)
+ return S3C2410_GPG0 + (irq - IRQ_EINT8);
+
+ return -EINVAL;
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_irq2pin);
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 8fbc88470261..ae2c5d7efc9d 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -47,7 +47,7 @@
* Mark IRQ_LCD valid
*
* 25-Jul-2005 Ben Dooks
- * Split the S3C2440 IRQ code to seperate file
+ * Split the S3C2440 IRQ code to separate file
*/
#include <linux/init.h>
@@ -187,7 +187,7 @@ struct irq_chip s3c_irq_level_chip = {
.set_wake = s3c_irq_wake
};
-static struct irq_chip s3c_irq_chip = {
+struct irq_chip s3c_irq_chip = {
.name = "s3c",
.ack = s3c_irq_ack,
.mask = s3c_irq_mask,
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 4fdb3117744f..bf5581a9aeea 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -83,38 +83,39 @@ static struct sleep_save core_save[] = {
SAVE_ITEM(S3C2410_REFRESH),
};
-static struct sleep_save gpio_save[] = {
- SAVE_ITEM(S3C2410_GPACON),
- SAVE_ITEM(S3C2410_GPADAT),
-
- SAVE_ITEM(S3C2410_GPBCON),
- SAVE_ITEM(S3C2410_GPBDAT),
- SAVE_ITEM(S3C2410_GPBUP),
-
- SAVE_ITEM(S3C2410_GPCCON),
- SAVE_ITEM(S3C2410_GPCDAT),
- SAVE_ITEM(S3C2410_GPCUP),
-
- SAVE_ITEM(S3C2410_GPDCON),
- SAVE_ITEM(S3C2410_GPDDAT),
- SAVE_ITEM(S3C2410_GPDUP),
-
- SAVE_ITEM(S3C2410_GPECON),
- SAVE_ITEM(S3C2410_GPEDAT),
- SAVE_ITEM(S3C2410_GPEUP),
-
- SAVE_ITEM(S3C2410_GPFCON),
- SAVE_ITEM(S3C2410_GPFDAT),
- SAVE_ITEM(S3C2410_GPFUP),
-
- SAVE_ITEM(S3C2410_GPGCON),
- SAVE_ITEM(S3C2410_GPGDAT),
- SAVE_ITEM(S3C2410_GPGUP),
-
- SAVE_ITEM(S3C2410_GPHCON),
- SAVE_ITEM(S3C2410_GPHDAT),
- SAVE_ITEM(S3C2410_GPHUP),
+static struct gpio_sleep {
+ void __iomem *base;
+ unsigned int gpcon;
+ unsigned int gpdat;
+ unsigned int gpup;
+} gpio_save[] = {
+ [0] = {
+ .base = S3C2410_GPACON,
+ },
+ [1] = {
+ .base = S3C2410_GPBCON,
+ },
+ [2] = {
+ .base = S3C2410_GPCCON,
+ },
+ [3] = {
+ .base = S3C2410_GPDCON,
+ },
+ [4] = {
+ .base = S3C2410_GPECON,
+ },
+ [5] = {
+ .base = S3C2410_GPFCON,
+ },
+ [6] = {
+ .base = S3C2410_GPGCON,
+ },
+ [7] = {
+ .base = S3C2410_GPHCON,
+ },
+};
+static struct sleep_save misc_save[] = {
SAVE_ITEM(S3C2410_DCLKCON),
};
@@ -486,6 +487,184 @@ static void s3c2410_pm_configure_extint(void)
}
}
+/* offsets for CON/DAT/UP registers */
+
+#define OFFS_CON (S3C2410_GPACON - S3C2410_GPACON)
+#define OFFS_DAT (S3C2410_GPADAT - S3C2410_GPACON)
+#define OFFS_UP (S3C2410_GPBUP - S3C2410_GPBCON)
+
+/* s3c2410_pm_save_gpios()
+ *
+ * Save the state of the GPIOs
+ */
+
+static void s3c2410_pm_save_gpios(void)
+{
+ struct gpio_sleep *gps = gpio_save;
+ unsigned int gpio;
+
+ for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
+ void __iomem *base = gps->base;
+
+ gps->gpcon = __raw_readl(base + OFFS_CON);
+ gps->gpdat = __raw_readl(base + OFFS_DAT);
+
+ if (gpio > 0)
+ gps->gpup = __raw_readl(base + OFFS_UP);
+
+ }
+}
+
+/* Test whether the given masked+shifted bits of an GPIO configuration
+ * are one of the SFN (special function) modes. */
+
+static inline int is_sfn(unsigned long con)
+{
+ return (con == 2 || con == 3);
+}
+
+/* Test if the given masked+shifted GPIO configuration is an input */
+
+static inline int is_in(unsigned long con)
+{
+ return con == 0;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an output */
+
+static inline int is_out(unsigned long con)
+{
+ return con == 1;
+}
+
+/* s3c2410_pm_restore_gpio()
+ *
+ * Restore one of the GPIO banks that was saved during suspend. This is
+ * not as simple as once thought, due to the possibility of glitches
+ * from the order that the CON and DAT registers are set in.
+ *
+ * The three states the pin can be are {IN,OUT,SFN} which gives us 9
+ * combinations of changes to check. Three of these, if the pin stays
+ * in the same configuration can be discounted. This leaves us with
+ * the following:
+ *
+ * { IN => OUT } Change DAT first
+ * { IN => SFN } Change CON first
+ * { OUT => SFN } Change CON first, so new data will not glitch
+ * { OUT => IN } Change CON first, so new data will not glitch
+ * { SFN => IN } Change CON first
+ * { SFN => OUT } Change DAT first, so new data will not glitch [1]
+ *
+ * We do not currently deal with the UP registers as these control
+ * weak resistors, so a small delay in change should not need to bring
+ * these into the calculations.
+ *
+ * [1] this assumes that writing to a pin DAT whilst in SFN will set the
+ * state for when it is next output.
+ */
+
+static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps)
+{
+ void __iomem *base = gps->base;
+ unsigned long gps_gpcon = gps->gpcon;
+ unsigned long gps_gpdat = gps->gpdat;
+ unsigned long old_gpcon;
+ unsigned long old_gpdat;
+ unsigned long old_gpup = 0x0;
+ unsigned long gpcon;
+ int nr;
+
+ old_gpcon = __raw_readl(base + OFFS_CON);
+ old_gpdat = __raw_readl(base + OFFS_DAT);
+
+ if (base == S3C2410_GPACON) {
+ /* GPACON only has one bit per control / data and no PULLUPs.
+ * GPACON[x] = 0 => Output, 1 => SFN */
+
+ /* first set all SFN bits to SFN */
+
+ gpcon = old_gpcon | gps->gpcon;
+ __raw_writel(gpcon, base + OFFS_CON);
+
+ /* now set all the other bits */
+
+ __raw_writel(gps_gpdat, base + OFFS_DAT);
+ __raw_writel(gps_gpcon, base + OFFS_CON);
+ } else {
+ unsigned long old, new, mask;
+ unsigned long change_mask = 0x0;
+
+ old_gpup = __raw_readl(base + OFFS_UP);
+
+ /* Create a change_mask of all the items that need to have
+ * their CON value changed before their DAT value, so that
+ * we minimise the work between the two settings.
+ */
+
+ for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
+ old = (old_gpcon & mask) >> nr;
+ new = (gps_gpcon & mask) >> nr;
+
+ /* If there is no change, then skip */
+
+ if (old == new)
+ continue;
+
+ /* If both are special function, then skip */
+
+ if (is_sfn(old) && is_sfn(new))
+ continue;
+
+ /* Change is IN => OUT, do not change now */
+
+ if (is_in(old) && is_out(new))
+ continue;
+
+ /* Change is SFN => OUT, do not change now */
+
+ if (is_sfn(old) && is_out(new))
+ continue;
+
+ /* We should now be at the case of IN=>SFN,
+ * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+ change_mask |= mask;
+ }
+
+ /* Write the new CON settings */
+
+ gpcon = old_gpcon & ~change_mask;
+ gpcon |= gps_gpcon & change_mask;
+
+ __raw_writel(gpcon, base + OFFS_CON);
+
+ /* Now change any items that require DAT,CON */
+
+ __raw_writel(gps_gpdat, base + OFFS_DAT);
+ __raw_writel(gps_gpcon, base + OFFS_CON);
+ __raw_writel(gps->gpup, base + OFFS_UP);
+ }
+
+ DBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
+ index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+
+/** s3c2410_pm_restore_gpios()
+ *
+ * Restore the state of the GPIOs
+ */
+
+static void s3c2410_pm_restore_gpios(void)
+{
+ struct gpio_sleep *gps = gpio_save;
+ int gpio;
+
+ for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
+ s3c2410_pm_restore_gpio(gpio, gps);
+ }
+}
+
void (*pm_cpu_prep)(void);
void (*pm_cpu_sleep)(void);
@@ -535,7 +714,8 @@ static int s3c2410_pm_enter(suspend_state_t state)
/* save all necessary core registers not covered by the drivers */
- s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save));
+ s3c2410_pm_save_gpios();
+ s3c2410_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
@@ -585,8 +765,9 @@ static int s3c2410_pm_enter(suspend_state_t state)
/* restore the system state */
s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
- s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save));
+ s3c2410_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
+ s3c2410_pm_restore_gpios();
s3c2410_pm_debug_init();
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
new file mode 100644
index 000000000000..faf3e0f9f4e2
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -0,0 +1,137 @@
+/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
+ *
+ * Copyright (c) 2004-2005,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2440/S3C2442 Common clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-clock.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
+{
+ unsigned long camdivn;
+ unsigned long dvs;
+
+ if (parent == &clk_f)
+ dvs = 0;
+ else if (parent == &clk_h)
+ dvs = S3C2440_CAMDIVN_DVSEN;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ camdivn = __raw_readl(S3C2440_CAMDIVN);
+ camdivn &= ~S3C2440_CAMDIVN_DVSEN;
+ camdivn |= dvs;
+ __raw_writel(camdivn, S3C2440_CAMDIVN);
+
+ return 0;
+}
+
+static struct clk clk_arm = {
+ .name = "armclk",
+ .id = -1,
+ .set_parent = s3c2440_setparent_armclk,
+};
+
+static int s3c244x_clk_add(struct sys_device *sysdev)
+{
+ unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
+ unsigned long clkdivn;
+ struct clk *clock_upll;
+ int ret;
+
+ printk("S3C244X: Clock Support, DVS %s\n",
+ (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
+
+ clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f;
+
+ ret = s3c24xx_register_clock(&clk_arm);
+ if (ret < 0) {
+ printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret);
+ return ret;
+ }
+
+ clock_upll = clk_get(NULL, "upll");
+ if (IS_ERR(clock_upll)) {
+ printk(KERN_ERR "S3C244X: Failed to get upll clock\n");
+ return -ENOENT;
+ }
+
+ /* check rate of UPLL, and if it is near 96MHz, then change
+ * to using half the UPLL rate for the system */
+
+ if (clk_get_rate(clock_upll) > (94 * MHZ)) {
+ clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
+
+ mutex_lock(&clocks_mutex);
+
+ clkdivn = __raw_readl(S3C2410_CLKDIVN);
+ clkdivn |= S3C2440_CLKDIVN_UCLK;
+ __raw_writel(clkdivn, S3C2410_CLKDIVN);
+
+ mutex_unlock(&clocks_mutex);
+ }
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2440_clk_driver = {
+ .add = s3c244x_clk_add,
+};
+
+static int s3c2440_clk_init(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver);
+}
+
+arch_initcall(s3c2440_clk_init);
+
+static struct sysdev_driver s3c2442_clk_driver = {
+ .add = s3c244x_clk_add,
+};
+
+static int s3c2442_clk_init(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver);
+}
+
+arch_initcall(s3c2442_clk_init);
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index 3444b13afac5..f197bb3a2366 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -151,13 +151,13 @@ static int s3c244x_resume(struct sys_device *dev)
/* Since the S3C2442 and S3C2440 share items, put both sysclasses here */
struct sysdev_class s3c2440_sysclass = {
- set_kset_name("s3c2440-core"),
+ .name = "s3c2440-core",
.suspend = s3c244x_suspend,
.resume = s3c244x_resume
};
struct sysdev_class s3c2442_sysclass = {
- set_kset_name("s3c2442-core"),
+ .name = "s3c2442-core",
.suspend = s3c244x_suspend,
.resume = s3c244x_resume
};
diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c
index 2ec1daaa0e53..766473b3f98b 100644
--- a/arch/arm/plat-s3c24xx/time.c
+++ b/arch/arm/plat-s3c24xx/time.c
@@ -130,9 +130,7 @@ static unsigned long s3c2410_gettimeoffset (void)
static irqreturn_t
s3c2410_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
timer_tick();
- write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 0a9a5e7f62e5..7ed58c0c24c2 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Fri May 11 19:53:41 2007
+# Last update: Sat Jan 26 14:45:34 2008
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -266,7 +266,7 @@ stork_egg ARCH_STORK_EGG STORK_EGG 248
wismo SA1100_WISMO WISMO 249
ezlinx ARCH_EZLINX EZLINX 250
at91rm9200 ARCH_AT91RM9200 AT91RM9200 251
-orion ARCH_ORION ORION 252
+adtech_orion ARCH_ADTECH_ORION ADTECH_ORION 252
neptune ARCH_NEPTUNE NEPTUNE 253
hackkit SA1100_HACKKIT HACKKIT 254
pxa_wins30 ARCH_PXA_WINS30 PXA_WINS30 255
@@ -661,7 +661,6 @@ a9200ec MACH_A9200EC A9200EC 645
pnx0105 MACH_PNX0105 PNX0105 646
adcpoecpu MACH_ADCPOECPU ADCPOECPU 647
csb637 MACH_CSB637 CSB637 648
-ml69q6203 MACH_ML69Q6203 ML69Q6203 649
mb9200 MACH_MB9200 MB9200 650
kulun MACH_KULUN KULUN 651
snapper MACH_SNAPPER SNAPPER 652
@@ -953,7 +952,6 @@ fred_jack MACH_FRED_JACK FRED_JACK 939
ttg_color1 MACH_TTG_COLOR1 TTG_COLOR1 940
nxeb500hmi MACH_NXEB500HMI NXEB500HMI 941
netdcu8 MACH_NETDCU8 NETDCU8 942
-ml675050_cpu_boa MACH_ML675050_CPU_BOA ML675050_CPU_BOA 943
ng_fvx538 MACH_NG_FVX538 NG_FVX538 944
ng_fvs338 MACH_NG_FVS338 NG_FVS338 945
pnx4103 MACH_PNX4103 PNX4103 946
@@ -1148,7 +1146,7 @@ aidx270 MACH_AIDX270 AIDX270 1134
rema MACH_REMA REMA 1135
bps1000 MACH_BPS1000 BPS1000 1136
hw90350 MACH_HW90350 HW90350 1137
-omap_sdp3430 MACH_OMAP_SDP3430 OMAP_SDP3430 1138
+omap_3430sdp MACH_OMAP_3430SDP OMAP_3430SDP 1138
bluetouch MACH_BLUETOUCH BLUETOUCH 1139
vstms MACH_VSTMS VSTMS 1140
xsbase270 MACH_XSBASE270 XSBASE270 1141
@@ -1214,7 +1212,7 @@ osstbox MACH_OSSTBOX OSSTBOX 1203
kbat9261 MACH_KBAT9261 KBAT9261 1204
ct1100 MACH_CT1100 CT1100 1205
akcppxa MACH_AKCPPXA AKCPPXA 1206
-zevio_1020 MACH_ZEVIO_1020 ZEVIO_1020 1207
+ochaya1020 MACH_OCHAYA1020 OCHAYA1020 1207
hitrack MACH_HITRACK HITRACK 1208
syme1 MACH_SYME1 SYME1 1209
syhl1 MACH_SYHL1 SYHL1 1210
@@ -1299,7 +1297,7 @@ xp179 MACH_XP179 XP179 1290
h4300 MACH_H4300 H4300 1291
goramo_mlr MACH_GORAMO_MLR GORAMO_MLR 1292
mxc30020evb MACH_MXC30020EVB MXC30020EVB 1293
-adsbitsymx MACH_ADSBITSIMX ADSBITSIMX 1294
+adsbitsyg5 MACH_ADSBITSYG5 ADSBITSYG5 1294
adsportalplus MACH_ADSPORTALPLUS ADSPORTALPLUS 1295
mmsp2plus MACH_MMSP2PLUS MMSP2PLUS 1296
em_x270 MACH_EM_X270 EM_X270 1297
@@ -1367,3 +1365,249 @@ db88f5281 MACH_DB88F5281 DB88F5281 1358
csb726 MACH_CSB726 CSB726 1359
tik27 MACH_TIK27 TIK27 1360
mx_uc7420 MACH_MX_UC7420 MX_UC7420 1361
+rirm3 MACH_RIRM3 RIRM3 1362
+pelco_odyssey MACH_PELCO_ODYSSEY PELCO_ODYSSEY 1363
+adx_abox MACH_ADX_ABOX ADX_ABOX 1365
+adx_tpid MACH_ADX_TPID ADX_TPID 1366
+minicheck MACH_MINICHECK MINICHECK 1367
+idam MACH_IDAM IDAM 1368
+mario_mx MACH_MARIO_MX MARIO_MX 1369
+vi1888 MACH_VI1888 VI1888 1370
+zr4230 MACH_ZR4230 ZR4230 1371
+t1_ix_blue MACH_T1_IX_BLUE T1_IX_BLUE 1372
+syhq2 MACH_SYHQ2 SYHQ2 1373
+computime_r3 MACH_COMPUTIME_R3 COMPUTIME_R3 1374
+oratis MACH_ORATIS ORATIS 1375
+mikko MACH_MIKKO MIKKO 1376
+holon MACH_HOLON HOLON 1377
+olip8 MACH_OLIP8 OLIP8 1378
+ghi270hg MACH_GHI270HG GHI270HG 1379
+davinci_dm6467_evm MACH_DAVINCI_DM6467_EVM DAVINCI_DM6467_EVM 1380
+davinci_dm355_evm MACH_DAVINCI_DM350_EVM DAVINCI_DM350_EVM 1381
+blackriver MACH_BLACKRIVER BLACKRIVER 1383
+sandgate_wp MACH_SANDGATEWP SANDGATEWP 1384
+cdotbwsg MACH_CDOTBWSG CDOTBWSG 1385
+quark963 MACH_QUARK963 QUARK963 1386
+csb735 MACH_CSB735 CSB735 1387
+littleton MACH_LITTLETON LITTLETON 1388
+mio_p550 MACH_MIO_P550 MIO_P550 1389
+motion2440 MACH_MOTION2440 MOTION2440 1390
+imm500 MACH_IMM500 IMM500 1391
+homematic MACH_HOMEMATIC HOMEMATIC 1392
+ermine MACH_ERMINE ERMINE 1393
+kb9202b MACH_KB9202B KB9202B 1394
+hs1xx MACH_HS1XX HS1XX 1395
+studentmate2440 MACH_STUDENTMATE2440 STUDENTMATE2440 1396
+arvoo_l1_z1 MACH_ARVOO_L1_Z1 ARVOO_L1_Z1 1397
+dep2410k MACH_DEP2410K DEP2410K 1398
+xxsvideo MACH_XXSVIDEO XXSVIDEO 1399
+im4004 MACH_IM4004 IM4004 1400
+ochaya1050 MACH_OCHAYA1050 OCHAYA1050 1401
+lep9261 MACH_LEP9261 LEP9261 1402
+svenmeb MACH_SVENMEB SVENMEB 1403
+fortunet2ne MACH_FORTUNET2NE FORTUNET2NE 1404
+nxhx MACH_NXHX NXHX 1406
+realview_pb11mp MACH_REALVIEW_PB11MP REALVIEW_PB11MP 1407
+ids500 MACH_IDS500 IDS500 1408
+ors_n725 MACH_ORS_N725 ORS_N725 1409
+hsdarm MACH_HSDARM HSDARM 1410
+sha_pon003 MACH_SHA_PON003 SHA_PON003 1411
+sha_pon004 MACH_SHA_PON004 SHA_PON004 1412
+sha_pon007 MACH_SHA_PON007 SHA_PON007 1413
+sha_pon011 MACH_SHA_PON011 SHA_PON011 1414
+h6042 MACH_H6042 H6042 1415
+h6043 MACH_H6043 H6043 1416
+looxc550 MACH_LOOXC550 LOOXC550 1417
+cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418
+app3xx MACH_APP3XX APP3XX 1419
+sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420
+xscale_palmt700p MACH_XSCALE_PALMT700P XSCALE_PALMT700P 1421
+xscale_palmt700w MACH_XSCALE_PALMT700W XSCALE_PALMT700W 1422
+xscale_palmt750 MACH_XSCALE_PALMT750 XSCALE_PALMT750 1423
+xscale_palmt755p MACH_XSCALE_PALMT755P XSCALE_PALMT755P 1424
+ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425
+sarge MACH_SARGE SARGE 1426
+a696 MACH_A696 A696 1427
+turtle1916 MACH_TURTLE TURTLE 1428
+mx27_3ds MACH_MX27_3DS MX27_3DS 1430
+bishop MACH_BISHOP BISHOP 1431
+pxx MACH_PXX PXX 1432
+redwood MACH_REDWOOD REDWOOD 1433
+omap_2430dlp MACH_OMAP_2430DLP OMAP_2430DLP 1436
+omap_2430osk MACH_OMAP_2430OSK OMAP_2430OSK 1437
+sardine MACH_SARDINE SARDINE 1438
+halibut MACH_HALIBUT HALIBUT 1439
+trout MACH_TROUT TROUT 1440
+goldfish MACH_GOLDFISH GOLDFISH 1441
+gesbc2440 MACH_GESBC2440 GESBC2440 1442
+nomad MACH_NOMAD NOMAD 1443
+rosalind MACH_ROSALIND ROSALIND 1444
+cc9p9215 MACH_CC9P9215 CC9P9215 1445
+cc9p9210 MACH_CC9P9210 CC9P9210 1446
+cc9p9215js MACH_CC9P9215JS CC9P9215JS 1447
+cc9p9210js MACH_CC9P9210JS CC9P9210JS 1448
+nasffe MACH_NASFFE NASFFE 1449
+tn2x0bd MACH_TN2X0BD TN2X0BD 1450
+gwmpxa MACH_GWMPXA GWMPXA 1451
+exyplus MACH_EXYPLUS EXYPLUS 1452
+jadoo21 MACH_JADOO21 JADOO21 1453
+looxn560 MACH_LOOXN560 LOOXN560 1454
+bonsai MACH_BONSAI BONSAI 1455
+adsmilgato MACH_ADSMILGATO ADSMILGATO 1456
+gba MACH_GBA GBA 1457
+h6044 MACH_H6044 H6044 1458
+app MACH_APP APP 1459
+tct_hammer MACH_TCT_HAMMER TCT_HAMMER 1460
+herald MACH_HERMES HERMES 1461
+artemis MACH_ARTEMIS ARTEMIS 1462
+htctitan MACH_HTCTITAN HTCTITAN 1463
+qranium MACH_QRANIUM QRANIUM 1464
+adx_wsc2 MACH_ADX_WSC2 ADX_WSC2 1465
+adx_medinet MACH_ADX_MEDINET ADX_MEDINET 1466
+bboard MACH_BBOARD BBOARD 1467
+cambria MACH_CAMBRIA CAMBRIA 1468
+mt7xxx MACH_MT7XXX MT7XXX 1469
+matrix512 MACH_MATRIX512 MATRIX512 1470
+matrix522 MACH_MATRIX522 MATRIX522 1471
+ipac5010 MACH_IPAC5010 IPAC5010 1472
+sakura MACH_SAKURA SAKURA 1473
+grocx MACH_GROCX GROCX 1474
+pm9263 MACH_PM9263 PM9263 1475
+sim_one MACH_SIM_ONE SIM_ONE 1476
+acq132 MACH_ACQ132 ACQ132 1477
+datr MACH_DATR DATR 1478
+actux1 MACH_ACTUX1 ACTUX1 1479
+actux2 MACH_ACTUX2 ACTUX2 1480
+actux3 MACH_ACTUX3 ACTUX3 1481
+flexit MACH_FLEXIT FLEXIT 1482
+bh2x0bd MACH_BH2X0BD BH2X0BD 1483
+atb2002 MACH_ATB2002 ATB2002 1484
+xenon MACH_XENON XENON 1485
+fm607 MACH_FM607 FM607 1486
+matrix514 MACH_MATRIX514 MATRIX514 1487
+matrix524 MACH_MATRIX524 MATRIX524 1488
+inpod MACH_INPOD INPOD 1489
+jive MACH_JIVE JIVE 1490
+tll_mx21 MACH_TLL_MX21 TLL_MX21 1491
+sbc2800 MACH_SBC2800 SBC2800 1492
+cc7ucamry MACH_CC7UCAMRY CC7UCAMRY 1493
+ubisys_p9_sc15 MACH_UBISYS_P9_SC15 UBISYS_P9_SC15 1494
+ubisys_p9_ssc2d10 MACH_UBISYS_P9_SSC2D10 UBISYS_P9_SSC2D10 1495
+ubisys_p9_rcu3 MACH_UBISYS_P9_RCU3 UBISYS_P9_RCU3 1496
+aml_m8000 MACH_AML_M8000 AML_M8000 1497
+snapper_270 MACH_SNAPPER_270 SNAPPER_270 1498
+omap_bbx MACH_OMAP_BBX OMAP_BBX 1499
+ucn2410 MACH_UCN2410 UCN2410 1500
+sam9_l9260 MACH_SAM9_L9260 SAM9_L9260 1501
+eti_c2 MACH_ETI_C2 ETI_C2 1502
+avalanche MACH_AVALANCHE AVALANCHE 1503
+realview_pb1176 MACH_REALVIEW_PB1176 REALVIEW_PB1176 1504
+dp1500 MACH_DP1500 DP1500 1505
+apple_iphone MACH_APPLE_IPHONE APPLE_IPHONE 1506
+yl9200 MACH_YL9200 YL9200 1507
+rd88f5182 MACH_RD88F5182 RD88F5182 1508
+kurobox_pro MACH_KUROBOX_PRO KUROBOX_PRO 1509
+se_poet MACH_SE_POET SE_POET 1510
+mx31_3ds MACH_MX31_3DS MX31_3DS 1511
+r270 MACH_R270 R270 1512
+armour21 MACH_ARMOUR21 ARMOUR21 1513
+dt2 MACH_DT2 DT2 1514
+vt4 MACH_VT4 VT4 1515
+tyco320 MACH_TYCO320 TYCO320 1516
+adma MACH_ADMA ADMA 1517
+wp188 MACH_WP188 WP188 1518
+corsica MACH_CORSICA CORSICA 1519
+bigeye MACH_BIGEYE BIGEYE 1520
+tll5000 MACH_TLL5000 TLL5000 1522
+hni270 MACH_HNI_X270 HNI_X270 1523
+qong MACH_QONG QONG 1524
+tcompact MACH_TCOMPACT TCOMPACT 1525
+puma5 MACH_PUMA5 PUMA5 1526
+elara MACH_ELARA ELARA 1527
+ellington MACH_ELLINGTON ELLINGTON 1528
+xda_atom MACH_XDA_ATOM XDA_ATOM 1529
+energizer2 MACH_ENERGIZER2 ENERGIZER2 1530
+odin MACH_ODIN ODIN 1531
+actux4 MACH_ACTUX4 ACTUX4 1532
+esl_omap MACH_ESL_OMAP ESL_OMAP 1533
+omap2evm MACH_OMAP2EVM OMAP2EVM 1534
+omap3evm MACH_OMAP3EVM OMAP3EVM 1535
+adx_pcu57 MACH_ADX_PCU57 ADX_PCU57 1536
+monaco MACH_MONACO MONACO 1537
+levante MACH_LEVANTE LEVANTE 1538
+tmxipx425 MACH_TMXIPX425 TMXIPX425 1539
+leep MACH_LEEP LEEP 1540
+raad MACH_RAAD RAAD 1541
+dns323 MACH_DNS323 DNS323 1542
+ap1000 MACH_AP1000 AP1000 1543
+a9sam6432 MACH_A9SAM6432 A9SAM6432 1544
+shiny MACH_SHINY SHINY 1545
+omap3_beagle MACH_OMAP3_BEAGLE OMAP3_BEAGLE 1546
+csr_bdb2 MACH_CSR_BDB2 CSR_BDB2 1547
+nokia_n810 MACH_NOKIA_N810 NOKIA_N810 1548
+c270 MACH_C270 C270 1549
+sentry MACH_SENTRY SENTRY 1550
+pcm038 MACH_PCM038 PCM038 1551
+anc300 MACH_ANC300 ANC300 1552
+htckaiser MACH_HTCKAISER HTCKAISER 1553
+sbat100 MACH_SBAT100 SBAT100 1554
+modunorm MACH_MODUNORM MODUNORM 1555
+pelos_twarm MACH_PELOS_TWARM PELOS_TWARM 1556
+flank MACH_FLANK FLANK 1557
+sirloin MACH_SIRLOIN SIRLOIN 1558
+brisket MACH_BRISKET BRISKET 1559
+chuck MACH_CHUCK CHUCK 1560
+otter MACH_OTTER OTTER 1561
+davinci_ldk MACH_DAVINCI_LDK DAVINCI_LDK 1562
+phreedom MACH_PHREEDOM PHREEDOM 1563
+sg310 MACH_SG310 SG310 1564
+ts_x09 MACH_TS209 TS209 1565
+at91cap9adk MACH_AT91CAP9ADK AT91CAP9ADK 1566
+tion9315 MACH_TION9315 TION9315 1567
+mast MACH_MAST MAST 1568
+pfw MACH_PFW PFW 1569
+yl_p2440 MACH_YL_P2440 YL_P2440 1570
+zsbc32 MACH_ZSBC32 ZSBC32 1571
+omap_pace2 MACH_OMAP_PACE2 OMAP_PACE2 1572
+imx_pace2 MACH_IMX_PACE2 IMX_PACE2 1573
+mx31moboard MACH_MX31MOBOARD MX31MOBOARD 1574
+mx37_3ds MACH_MX37_3DS MX37_3DS 1575
+rcc MACH_RCC RCC 1576
+dmp MACH_ARM9 ARM9 1577
+vision_ep9307 MACH_VISION_EP9307 VISION_EP9307 1578
+scly1000 MACH_SCLY1000 SCLY1000 1579
+fontel_ep MACH_FONTEL_EP FONTEL_EP 1580
+voiceblue3g MACH_VOICEBLUE3G VOICEBLUE3G 1581
+tt9200 MACH_TT9200 TT9200 1582
+digi2410 MACH_DIGI2410 DIGI2410 1583
+terastation_pro2 MACH_TERASTATION_PRO2 TERASTATION_PRO2 1584
+linkstation_pro MACH_LINKSTATION_PRO LINKSTATION_PRO 1585
+motorola_a780 MACH_MOTOROLA_A780 MOTOROLA_A780 1587
+motorola_e6 MACH_MOTOROLA_E6 MOTOROLA_E6 1588
+motorola_e2 MACH_MOTOROLA_E2 MOTOROLA_E2 1589
+motorola_e680 MACH_MOTOROLA_E680 MOTOROLA_E680 1590
+ur2410 MACH_UR2410 UR2410 1591
+tas9261 MACH_TAS9261 TAS9261 1592
+davinci_hermes_hd MACH_HERMES_HD HERMES_HD 1593
+davinci_perseo_hd MACH_PERSEO_HD PERSEO_HD 1594
+stargazer2 MACH_STARGAZER2 STARGAZER2 1595
+e350 MACH_E350 E350 1596
+wpcm450 MACH_WPCM450 WPCM450 1597
+cartesio MACH_CARTESIO CARTESIO 1598
+toybox MACH_TOYBOX TOYBOX 1599
+tx27 MACH_TX27 TX27 1600
+ts409 MACH_TS409 TS409 1601
+p300 MACH_P300 P300 1602
+xdacomet MACH_XDACOMET XDACOMET 1603
+dexflex2 MACH_DEXFLEX2 DEXFLEX2 1604
+ow MACH_OW OW 1605
+armebs3 MACH_ARMEBS3 ARMEBS3 1606
+u3 MACH_U3 U3 1607
+smdk2450 MACH_SMDK2450 SMDK2450 1608
+rsi_ews MACH_RSI_EWS RSI_EWS 1609
+tnb MACH_TNB TNB 1610
+toepath MACH_TOEPATH TOEPATH 1611
+kb9263 MACH_KB9263 KB9263 1612
+mt7108 MACH_MT7108 MT7108 1613
+smtr2440 MACH_SMTR2440 SMTR2440 1614
+manao MACH_MANAO MANAO 1615
diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h
index 54a2ad6d9ca2..c85860bad585 100644
--- a/arch/arm/vfp/vfp.h
+++ b/arch/arm/vfp/vfp.h
@@ -265,7 +265,11 @@ struct vfp_double {
* which returns (double)0.0. This is useful for the compare with
* zero instructions.
*/
+#ifdef CONFIG_VFPv3
+#define VFP_REG_ZERO 32
+#else
#define VFP_REG_ZERO 16
+#endif
extern u64 vfp_get_double(unsigned int reg);
extern void vfp_put_double(u64 val, unsigned int reg);
@@ -361,10 +365,12 @@ u32 vfp_estimate_sqrt_significand(u32 exponent, u32 significand);
* OP_SCALAR - this operation always operates in scalar mode
* OP_SD - the instruction exceptionally writes to a single precision result.
* OP_DD - the instruction exceptionally writes to a double precision result.
+ * OP_SM - the instruction exceptionally reads from a single precision operand.
*/
#define OP_SCALAR (1 << 0)
#define OP_SD (1 << 1)
#define OP_DD (1 << 1)
+#define OP_SM (1 << 2)
struct op {
u32 (* const fn)(int dd, int dn, int dm, u32 fpscr);
diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c
index 190a09ad18eb..6cac43bd1d86 100644
--- a/arch/arm/vfp/vfpdouble.c
+++ b/arch/arm/vfp/vfpdouble.c
@@ -668,8 +668,8 @@ static struct op fops_ext[32] = {
[FEXT_TO_IDX(FEXT_FCMPZ)] = { vfp_double_fcmpz, OP_SCALAR },
[FEXT_TO_IDX(FEXT_FCMPEZ)] = { vfp_double_fcmpez, OP_SCALAR },
[FEXT_TO_IDX(FEXT_FCVT)] = { vfp_double_fcvts, OP_SCALAR|OP_SD },
- [FEXT_TO_IDX(FEXT_FUITO)] = { vfp_double_fuito, OP_SCALAR },
- [FEXT_TO_IDX(FEXT_FSITO)] = { vfp_double_fsito, OP_SCALAR },
+ [FEXT_TO_IDX(FEXT_FUITO)] = { vfp_double_fuito, OP_SCALAR|OP_SM },
+ [FEXT_TO_IDX(FEXT_FSITO)] = { vfp_double_fsito, OP_SCALAR|OP_SM },
[FEXT_TO_IDX(FEXT_FTOUI)] = { vfp_double_ftoui, OP_SCALAR|OP_SD },
[FEXT_TO_IDX(FEXT_FTOUIZ)] = { vfp_double_ftouiz, OP_SCALAR|OP_SD },
[FEXT_TO_IDX(FEXT_FTOSI)] = { vfp_double_ftosi, OP_SCALAR|OP_SD },
@@ -1128,7 +1128,7 @@ u32 vfp_double_cpdo(u32 inst, u32 fpscr)
u32 exceptions = 0;
unsigned int dest;
unsigned int dn = vfp_get_dn(inst);
- unsigned int dm = vfp_get_dm(inst);
+ unsigned int dm;
unsigned int vecitr, veclen, vecstride;
struct op *fop;
@@ -1146,6 +1146,14 @@ u32 vfp_double_cpdo(u32 inst, u32 fpscr)
dest = vfp_get_dd(inst);
/*
+ * f[us]ito takes a sN operand, not a dN operand.
+ */
+ if (fop->flags & OP_SM)
+ dm = vfp_get_sm(inst);
+ else
+ dm = vfp_get_dm(inst);
+
+ /*
* If destination bank is zero, vector length is always '1'.
* ARM DDI0100F C5.1.3, C5.3.2.
*/
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 0ac022f800a1..353f9e5c7919 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -99,12 +99,12 @@ vfp_support_entry:
DBGSTR1 "save old state %p", r4
cmp r4, #0
beq no_old_VFP_process
+ VFPFSTMIA r4, r5 @ save the working registers
VFPFMRX r5, FPSCR @ current status
- VFPFMRX r6, FPINST @ FPINST (always there, rev0 onwards)
- tst r1, #FPEXC_FPV2 @ is there an FPINST2 to read?
- VFPFMRX r8, FPINST2, NE @ FPINST2 if needed - avoids reading
- @ nonexistant reg on rev0
- VFPFSTMIA r4 @ save the working registers
+ tst r1, #FPEXC_EX @ is there additional state to save?
+ VFPFMRX r6, FPINST, NE @ FPINST (only if FPEXC.EX is set)
+ tstne r1, #FPEXC_FP2V @ is there an FPINST2 to read?
+ VFPFMRX r8, FPINST2, NE @ FPINST2 if needed (and present)
stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2
@ and point r4 at the word at the
@ start of the register dump
@@ -114,13 +114,13 @@ no_old_VFP_process:
DBGSTR1 "load state %p", r10
str r10, [r3, r11, lsl #2] @ update the last_VFP_context pointer
@ Load the saved state back into the VFP
- VFPFLDMIA r10 @ reload the working registers while
+ VFPFLDMIA r10, r5 @ reload the working registers while
@ FPEXC is in a safe state
ldmia r10, {r1, r5, r6, r8} @ load FPEXC, FPSCR, FPINST, FPINST2
- tst r1, #FPEXC_FPV2 @ is there an FPINST2 to write?
- VFPFMXR FPINST2, r8, NE @ FPINST2 if needed - avoids writing
- @ nonexistant reg on rev0
- VFPFMXR FPINST, r6
+ tst r1, #FPEXC_EX @ is there additional state to restore?
+ VFPFMXR FPINST, r6, NE @ restore FPINST (only if FPEXC.EX is set)
+ tstne r1, #FPEXC_FP2V @ is there an FPINST2 to write?
+ VFPFMXR FPINST2, r8, NE @ FPINST2 if needed (and present)
VFPFMXR FPSCR, r5 @ restore status
check_for_exception:
@@ -136,10 +136,14 @@ check_for_exception:
look_for_VFP_exceptions:
- tst r1, #FPEXC_EX
+ @ Check for synchronous or asynchronous exception
+ tst r1, #FPEXC_EX | FPEXC_DEX
bne process_exception
+ @ On some implementations of the VFP subarch 1, setting FPSCR.IXE
+ @ causes all the CDP instructions to be bounced synchronously without
+ @ setting the FPEXC.EX bit
VFPFMRX r5, FPSCR
- tst r5, #FPSCR_IXE @ IXE doesn't set FPEXC_EX !
+ tst r5, #FPSCR_IXE
bne process_exception
@ Fall into hand on to next handler - appropriate coproc instr
@@ -150,10 +154,6 @@ look_for_VFP_exceptions:
process_exception:
DBGSTR "bounce"
- sub r2, r2, #4
- str r2, [sp, #S_PC] @ retry the instruction on exit from
- @ the imprecise exception handling in
- @ the support code
mov r2, sp @ nothing stacked - regdump is at TOS
mov lr, r9 @ setup for a return to the user code.
@@ -161,7 +161,7 @@ process_exception:
@ r0 holds the trigger instruction
@ r1 holds the FPEXC value
@ r2 pointer to register dump
- b VFP9_bounce @ we have handled this - the support
+ b VFP_bounce @ we have handled this - the support
@ code will raise an exception if
@ required. If not, the user code will
@ retry the faulted instruction
@@ -174,12 +174,12 @@ vfp_save_state:
@ r0 - save location
@ r1 - FPEXC
DBGSTR1 "save VFP state %p", r0
+ VFPFSTMIA r0, r2 @ save the working registers
VFPFMRX r2, FPSCR @ current status
- VFPFMRX r3, FPINST @ FPINST (always there, rev0 onwards)
- tst r1, #FPEXC_FPV2 @ is there an FPINST2 to read?
- VFPFMRX r12, FPINST2, NE @ FPINST2 if needed - avoids reading
- @ nonexistant reg on rev0
- VFPFSTMIA r0 @ save the working registers
+ tst r1, #FPEXC_EX @ is there additional state to save?
+ VFPFMRX r3, FPINST, NE @ FPINST (only if FPEXC.EX is set)
+ tstne r1, #FPEXC_FP2V @ is there an FPINST2 to read?
+ VFPFMRX r12, FPINST2, NE @ FPINST2 if needed (and present)
stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2
mov pc, lr
#endif
@@ -217,8 +217,15 @@ vfp_get_double:
fmrrd r0, r1, d\dr
mov pc, lr
.endr
+#ifdef CONFIG_VFPv3
+ @ d16 - d31 registers
+ .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+ mrrc p11, 3, r0, r1, c\dr @ fmrrd r0, r1, d\dr
+ mov pc, lr
+ .endr
+#endif
- @ virtual register 16 for compare with zero
+ @ virtual register 16 (or 32 if VFPv3) for compare with zero
mov r0, #0
mov r1, #0
mov pc, lr
@@ -231,3 +238,10 @@ vfp_put_double:
fmdrr d\dr, r0, r1
mov pc, lr
.endr
+#ifdef CONFIG_VFPv3
+ @ d16 - d31 registers
+ .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+ mcrr p11, 3, r1, r2, c\dr @ fmdrr r1, r2, d\dr
+ mov pc, lr
+ .endr
+#endif
diff --git a/arch/arm/vfp/vfpinstr.h b/arch/arm/vfp/vfpinstr.h
index 7f343a4beca0..15b95b5ab97e 100644
--- a/arch/arm/vfp/vfpinstr.h
+++ b/arch/arm/vfp/vfpinstr.h
@@ -52,11 +52,11 @@
#define FEXT_TO_IDX(inst) ((inst & 0x000f0000) >> 15 | (inst & (1 << 7)) >> 7)
#define vfp_get_sd(inst) ((inst & 0x0000f000) >> 11 | (inst & (1 << 22)) >> 22)
-#define vfp_get_dd(inst) ((inst & 0x0000f000) >> 12)
+#define vfp_get_dd(inst) ((inst & 0x0000f000) >> 12 | (inst & (1 << 22)) >> 18)
#define vfp_get_sm(inst) ((inst & 0x0000000f) << 1 | (inst & (1 << 5)) >> 5)
-#define vfp_get_dm(inst) ((inst & 0x0000000f))
+#define vfp_get_dm(inst) ((inst & 0x0000000f) | (inst & (1 << 5)) >> 1)
#define vfp_get_sn(inst) ((inst & 0x000f0000) >> 15 | (inst & (1 << 7)) >> 7)
-#define vfp_get_dn(inst) ((inst & 0x000f0000) >> 16)
+#define vfp_get_dn(inst) ((inst & 0x000f0000) >> 16 | (inst & (1 << 7)) >> 3)
#define vfp_single(inst) (((inst) & 0x0000f00) == 0xa00)
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index b4e210df92f2..32455c633f1c 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -125,13 +125,13 @@ void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs)
send_sig_info(SIGFPE, &info, current);
}
-static void vfp_panic(char *reason)
+static void vfp_panic(char *reason, u32 inst)
{
int i;
printk(KERN_ERR "VFP: Error: %s\n", reason);
printk(KERN_ERR "VFP: EXC 0x%08x SCR 0x%08x INST 0x%08x\n",
- fmrx(FPEXC), fmrx(FPSCR), fmrx(FPINST));
+ fmrx(FPEXC), fmrx(FPSCR), inst);
for (i = 0; i < 32; i += 2)
printk(KERN_ERR "VFP: s%2u: 0x%08x s%2u: 0x%08x\n",
i, vfp_get_float(i), i+1, vfp_get_float(i+1));
@@ -147,19 +147,16 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_
pr_debug("VFP: raising exceptions %08x\n", exceptions);
if (exceptions == VFP_EXCEPTION_ERROR) {
- vfp_panic("unhandled bounce");
+ vfp_panic("unhandled bounce", inst);
vfp_raise_sigfpe(0, regs);
return;
}
/*
- * If any of the status flags are set, update the FPSCR.
+ * Update the FPSCR with the additional exception flags.
* Comparison instructions always return at least one of
* these flags set.
*/
- if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
- fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V);
-
fpscr |= exceptions;
fmxr(FPSCR, fpscr);
@@ -220,35 +217,64 @@ static u32 vfp_emulate_instruction(u32 inst, u32 fpscr, struct pt_regs *regs)
/*
* Package up a bounce condition.
*/
-void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
+void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
{
- u32 fpscr, orig_fpscr, exceptions, inst;
+ u32 fpscr, orig_fpscr, fpsid, exceptions;
pr_debug("VFP: bounce: trigger %08x fpexc %08x\n", trigger, fpexc);
/*
- * Enable access to the VFP so we can handle the bounce.
+ * At this point, FPEXC can have the following configuration:
+ *
+ * EX DEX IXE
+ * 0 1 x - synchronous exception
+ * 1 x 0 - asynchronous exception
+ * 1 x 1 - sychronous on VFP subarch 1 and asynchronous on later
+ * 0 0 1 - synchronous on VFP9 (non-standard subarch 1
+ * implementation), undefined otherwise
+ *
+ * Clear various bits and enable access to the VFP so we can
+ * handle the bounce.
*/
- fmxr(FPEXC, fpexc & ~(FPEXC_EX|FPEXC_FPV2|FPEXC_INV|FPEXC_UFC|FPEXC_OFC|FPEXC_IOC));
+ fmxr(FPEXC, fpexc & ~(FPEXC_EX|FPEXC_DEX|FPEXC_FP2V|FPEXC_VV|FPEXC_TRAP_MASK));
+ fpsid = fmrx(FPSID);
orig_fpscr = fpscr = fmrx(FPSCR);
/*
- * If we are running with inexact exceptions enabled, we need to
- * emulate the trigger instruction. Note that as we're emulating
- * the trigger instruction, we need to increment PC.
+ * Check for the special VFP subarch 1 and FPSCR.IXE bit case
*/
- if (fpscr & FPSCR_IXE) {
- regs->ARM_pc += 4;
+ if ((fpsid & FPSID_ARCH_MASK) == (1 << FPSID_ARCH_BIT)
+ && (fpscr & FPSCR_IXE)) {
+ /*
+ * Synchronous exception, emulate the trigger instruction
+ */
goto emulate;
}
- barrier();
+ if (fpexc & FPEXC_EX) {
+ /*
+ * Asynchronous exception. The instruction is read from FPINST
+ * and the interrupted instruction has to be restarted.
+ */
+ trigger = fmrx(FPINST);
+ regs->ARM_pc -= 4;
+ } else if (!(fpexc & FPEXC_DEX)) {
+ /*
+ * Illegal combination of bits. It can be caused by an
+ * unallocated VFP instruction but with FPSCR.IXE set and not
+ * on VFP subarch 1.
+ */
+ vfp_raise_exceptions(VFP_EXCEPTION_ERROR, trigger, fpscr, regs);
+ return;
+ }
/*
- * Modify fpscr to indicate the number of iterations remaining
+ * Modify fpscr to indicate the number of iterations remaining.
+ * If FPEXC.EX is 0, FPEXC.DEX is 1 and the FPEXC.VV bit indicates
+ * whether FPEXC.VECITR or FPSCR.LEN is used.
*/
- if (fpexc & FPEXC_EX) {
+ if (fpexc & (FPEXC_EX | FPEXC_VV)) {
u32 len;
len = fpexc + (1 << FPEXC_LENGTH_BIT);
@@ -262,15 +288,15 @@ void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
* FPEXC bounce reason, but this appears to be unreliable.
* Emulate the bounced instruction instead.
*/
- inst = fmrx(FPINST);
- exceptions = vfp_emulate_instruction(inst, fpscr, regs);
+ exceptions = vfp_emulate_instruction(trigger, fpscr, regs);
if (exceptions)
- vfp_raise_exceptions(exceptions, inst, orig_fpscr, regs);
+ vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs);
/*
- * If there isn't a second FP instruction, exit now.
+ * If there isn't a second FP instruction, exit now. Note that
+ * the FPEXC.FP2V bit is valid only if FPEXC.EX is 1.
*/
- if (!(fpexc & FPEXC_FPV2))
+ if (fpexc ^ (FPEXC_EX | FPEXC_FP2V))
return;
/*
@@ -279,10 +305,9 @@ void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
*/
barrier();
trigger = fmrx(FPINST2);
- orig_fpscr = fpscr = fmrx(FPSCR);
emulate:
- exceptions = vfp_emulate_instruction(trigger, fpscr, regs);
+ exceptions = vfp_emulate_instruction(trigger, orig_fpscr, regs);
if (exceptions)
vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs);
}
@@ -306,16 +331,9 @@ static int __init vfp_init(void)
{
unsigned int vfpsid;
unsigned int cpu_arch = cpu_architecture();
- u32 access = 0;
- if (cpu_arch >= CPU_ARCH_ARMv6) {
- access = get_copro_access();
-
- /*
- * Enable full access to VFP (cp10 and cp11)
- */
- set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11));
- }
+ if (cpu_arch >= CPU_ARCH_ARMv6)
+ vfp_enable(NULL);
/*
* First check that there is a VFP that we can use.
@@ -329,15 +347,9 @@ static int __init vfp_init(void)
vfp_vector = vfp_null_entry;
printk(KERN_INFO "VFP support v0.3: ");
- if (VFP_arch) {
+ if (VFP_arch)
printk("not present\n");
-
- /*
- * Restore the copro access register.
- */
- if (cpu_arch >= CPU_ARCH_ARMv6)
- set_copro_access(access);
- } else if (vfpsid & FPSID_NODOUBLE) {
+ else if (vfpsid & FPSID_NODOUBLE) {
printk("no double precision support\n");
} else {
smp_call_function(vfp_enable, NULL, 1, 1);